# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/watchdog/snps,dw-wdt.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Synopsys Designware Watchdog Timer

allOf:
  - $ref: "watchdog.yaml#"

maintainers:
  - Jamie Iles <jamie@jamieiles.com>

properties:
  compatible:
    oneOf:
      - const: snps,dw-wdt
      - items:
          - enum:
              - rockchip,rk3066-wdt
              - rockchip,rk3188-wdt
              - rockchip,rk3288-wdt
              - rockchip,rk3368-wdt
          - const: snps,dw-wdt

  reg:
    maxItems: 1

  interrupts:
    description: DW Watchdog pre-timeout interrupt
    maxItems: 1

  clocks:
    minItems: 1
    items:
      - description: Watchdog timer reference clock
      - description: APB3 interface clock

  clock-names:
    minItems: 1
    items:
      - const: tclk
      - const: pclk

  resets:
    description: Phandle to the DW Watchdog reset lane
    maxItems: 1

  snps,watchdog-tops:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    description: |
      DW APB Watchdog custom timer intervals - Timeout Period ranges (TOPs).
      Each TOP is a number loaded into the watchdog counter at the moment of
      the timer restart. The counter decrementing happens each tick of the
      reference clock. Therefore the TOPs array is equivalent to an array of
      the timer expiration intervals supported by the DW APB Watchdog. Note
      DW APB Watchdog IP-core might be synthesized with fixed TOP values,
      in which case this property is unnecessary with default TOPs utilized.
    default: [0x0001000 0x0002000 0x0004000 0x0008000
      0x0010000 0x0020000 0x0040000 0x0080000
      0x0100000 0x0200000 0x0400000 0x0800000
      0x1000000 0x2000000 0x4000000 0x8000000]
    minItems: 16
    maxItems: 16

unevaluatedProperties: false

required:
  - compatible
  - reg
  - clocks

examples:
  - |
    watchdog@ffd02000 {
      compatible = "snps,dw-wdt";
      reg = <0xffd02000 0x1000>;
      interrupts = <0 171 4>;
      clocks = <&per_base_clk>;
      resets = <&wdt_rst>;
    };

  - |
    watchdog@ffd02000 {
      compatible = "snps,dw-wdt";
      reg = <0xffd02000 0x1000>;
      interrupts = <0 171 4>;
      clocks = <&per_base_clk>;
      clock-names = "tclk";
      snps,watchdog-tops = <0x000000FF 0x000001FF 0x000003FF
                            0x000007FF 0x0000FFFF 0x0001FFFF
                            0x0003FFFF 0x0007FFFF 0x000FFFFF
                            0x001FFFFF 0x003FFFFF 0x007FFFFF
                            0x00FFFFFF 0x01FFFFFF 0x03FFFFFF
                            0x07FFFFFF>;
    };
...