tty: move the termios object into the tty

This will let us sort out a whole pile of tty related races. The
alternative would be to keep points and refcount the termios objects.
However
1. They are tiny anyway
2. Many devices don't use the stored copies
3. We can remove a pty special case

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index a3dddc1..ae75a3c 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -873,7 +873,7 @@
 
 	/* Handle transition to B0 status */
 	if (old_termios->c_cflag & CBAUD &&
-	    !(tty->termios->c_cflag & CBAUD)) {
+	    !(tty->termios.c_cflag & CBAUD)) {
 		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
 		spin_lock_irqsave(&info->lock,flags);
 	 	set_signals(info);
@@ -882,9 +882,9 @@
 
 	/* Handle transition away from B0 status */
 	if (!(old_termios->c_cflag & CBAUD) &&
-	    tty->termios->c_cflag & CBAUD) {
+	    tty->termios.c_cflag & CBAUD) {
 		info->serial_signals |= SerialSignal_DTR;
- 		if (!(tty->termios->c_cflag & CRTSCTS) ||
+ 		if (!(tty->termios.c_cflag & CRTSCTS) ||
  		    !test_bit(TTY_THROTTLED, &tty->flags)) {
 			info->serial_signals |= SerialSignal_RTS;
  		}
@@ -895,7 +895,7 @@
 
 	/* Handle turning off CRTSCTS */
 	if (old_termios->c_cflag & CRTSCTS &&
-	    !(tty->termios->c_cflag & CRTSCTS)) {
+	    !(tty->termios.c_cflag & CRTSCTS)) {
 		tty->hw_stopped = 0;
 		tx_release(tty);
 	}
@@ -1473,7 +1473,7 @@
 	if (I_IXOFF(tty))
 		send_xchar(tty, STOP_CHAR(tty));
 
- 	if (tty->termios->c_cflag & CRTSCTS) {
+ 	if (tty->termios.c_cflag & CRTSCTS) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->serial_signals &= ~SerialSignal_RTS;
 	 	set_signals(info);
@@ -1502,7 +1502,7 @@
 			send_xchar(tty, START_CHAR(tty));
 	}
 
- 	if (tty->termios->c_cflag & CRTSCTS) {
+ 	if (tty->termios.c_cflag & CRTSCTS) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->serial_signals |= SerialSignal_RTS;
 	 	set_signals(info);
@@ -2708,7 +2708,7 @@
 
 	reset_port(info);
 
- 	if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+ 	if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
  		info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
 		set_signals(info);
 	}
@@ -2749,7 +2749,7 @@
 
 	get_signals(info);
 
-	if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) )
+	if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) )
 		rx_start(info);
 
 	spin_unlock_irqrestore(&info->lock,flags);
@@ -2762,14 +2762,14 @@
 	unsigned cflag;
 	int bits_per_char;
 
-	if (!info->port.tty || !info->port.tty->termios)
+	if (!info->port.tty)
 		return;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):%s change_params()\n",
 			 __FILE__,__LINE__, info->device_name );
 
-	cflag = info->port.tty->termios->c_cflag;
+	cflag = info->port.tty->termios.c_cflag;
 
 	/* if B0 rate (hangup) specified then negate DTR and RTS */
 	/* otherwise assert DTR and RTS */
@@ -3306,7 +3306,7 @@
 		return 0;
 	}
 
-	if (tty->termios->c_cflag & CLOCAL)
+	if (tty->termios.c_cflag & CLOCAL)
 		do_clocal = true;
 
 	/* Wait for carrier detect and the line to become
@@ -3332,7 +3332,7 @@
 	port->blocked_open++;
 
 	while (1) {
-		if (tty->termios->c_cflag & CBAUD)
+		if (tty->termios.c_cflag & CBAUD)
 			tty_port_raise_dtr_rts(port);
 
 		set_current_state(TASK_INTERRUPTIBLE);