diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
new file mode 100644
index 0000000..13aa4b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt
@@ -0,0 +1,47 @@
+MIPS CPU interrupt controller
+
+On MIPS the mips_cpu_intc_init() helper can be used to initialize the 8 CPU
+IRQs from a devicetree file and create a irq_domain for IRQ controller.
+
+With the irq_domain in place we can describe how the 8 IRQs are wired to the
+platforms internal interrupt controller cascade.
+
+Below is an example of a platform describing the cascade inside the devicetree
+and the code used to load it inside arch_init_irq().
+
+Required properties:
+- compatible : Should be "mti,cpu-interrupt-controller"
+
+Example devicetree:
+	cpu-irq: cpu-irq@0 {
+		#address-cells = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: intc@200 {
+		compatible = "ralink,rt2880-intc";
+		reg = <0x200 0x100>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpu-irq>;
+		interrupts = <2>;
+	};
+
+
+Example platform irq.c:
+static struct of_device_id __initdata of_irq_ids[] = {
+	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
+	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
+	{},
+};
+
+void __init arch_init_irq(void)
+{
+	of_irq_init(of_irq_ids);
+}
diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
new file mode 100644
index 0000000..5b78591
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
@@ -0,0 +1,16 @@
+Lantiq SoC ASC serial controller
+
+Required properties:
+- compatible : Should be "lantiq,asc"
+- reg : Address and length of the register set for the device
+- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
+  depends on the interrupt-parent interrupt controller.
+
+Example:
+
+asc1: serial@E100C00 {
+	compatible = "lantiq,asc";
+	reg = <0xE100C00 0x400>;
+	interrupt-parent = <&icu0>;
+	interrupts = <112 113 114>;
+};
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 91b9d69..4b597d9 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -18,10 +18,10 @@
 platforms += mti-malta
 platforms += mti-sead3
 platforms += netlogic
-platforms += pmc-sierra
+platforms += pmcs-msp71xx
 platforms += pnx833x
-platforms += pnx8550
 platforms += powertv
+platforms += ralink
 platforms += rb532
 platforms += sgi-ip22
 platforms += sgi-ip27
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1eabe57..ae9c716 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -108,12 +108,14 @@
 config BCM47XX
 	bool "Broadcom BCM47XX based boards"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select BOOT_RAW
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select FW_CFE
 	select HW_HAS_PCI
 	select IRQ_CPU
+	select NO_EXCEPT_FILL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -295,6 +297,7 @@
 	select BOOT_RAW
 	select CEVT_R4K
 	select CSRC_R4K
+	select CSRC_GIC
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
 	select HAVE_PCSPKR_PLATFORM
@@ -354,6 +357,7 @@
 	select USB_ARCH_HAS_EHCI
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
+	select USE_OF
 	help
 	  This enables support for the MIPS Technologies SEAD3 evaluation
 	  board.
@@ -385,16 +389,6 @@
 	help
 	 Support for NXP Semiconductors STB225 Development Board.
 
-config PNX8550_JBS
-	bool "NXP PNX8550 based JBS board"
-	select PNX8550
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config PNX8550_STB810
-	bool "NXP PNX8550 based STB810 board"
-	select PNX8550
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
 config PMC_MSP
 	bool "PMC-Sierra MSP chipsets"
 	select CEVT_R4K
@@ -434,6 +428,22 @@
 	help
 	  This enables support for the Cisco PowerTV Platform.
 
+config RALINK
+	bool "Ralink based machines"
+	select CEVT_R4K
+	select CSRC_R4K
+	select BOOT_RAW
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select USE_OF
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
+	select HAVE_MACH_CLKDEV
+	select CLKDEV_LOOKUP
+
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
 	select FW_ARC
@@ -835,8 +845,9 @@
 source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
-source "arch/mips/pmc-sierra/Kconfig"
+source "arch/mips/pmcs-msp71xx/Kconfig"
 source "arch/mips/powertv/Kconfig"
+source "arch/mips/ralink/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
 source "arch/mips/txx9/Kconfig"
@@ -917,6 +928,9 @@
 config CSRC_R4K
 	bool
 
+config CSRC_GIC
+	bool
+
 config CSRC_SB1250
 	bool
 
@@ -1103,19 +1117,6 @@
 	bool
 	select SOC_PNX833X
 
-config PNX8550
-	bool
-	select SOC_PNX8550
-
-config SOC_PNX8550
-	bool
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select GENERIC_GPIO
-
 config SWAP_IO_SPACE
 	bool
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index f2dfd40..6f7978f 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -191,7 +191,7 @@
 include $(srctree)/arch/mips/Kbuild.platforms
 
 ifdef CONFIG_PHYSICAL_START
-load-y                                  = $(CONFIG_PHYSICAL_START)
+load-y					= $(CONFIG_PHYSICAL_START)
 endif
 
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform
index 942c580..fa1bdd1 100644
--- a/arch/mips/alchemy/Platform
+++ b/arch/mips/alchemy/Platform
@@ -1,7 +1,7 @@
 #
 # Core Alchemy code
 #
-platform-$(CONFIG_MIPS_ALCHEMY)	+= alchemy/common/
+platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/common/
 
 
 #
@@ -45,7 +45,7 @@
 #
 # MyCable eval board
 #
-platform-$(CONFIG_MIPS_XXS1500)	+= alchemy/
+platform-$(CONFIG_MIPS_XXS1500) += alchemy/
 load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
 
 #
@@ -56,7 +56,7 @@
 
 # boards can specify their own <gpio.h> in one of their include dirs.
 # If they do, placing this line here at the end will make sure the
-# compiler picks the board one.  If they don't, it will make sure
+# compiler picks the board one.	 If they don't, it will make sure
 # the alchemy generic gpio header is picked up.
 
 cflags-$(CONFIG_MIPS_ALCHEMY)	+= -I$(srctree)/arch/mips/include/asm/mach-au1x00
diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c
index ba32590..cb0f6af 100644
--- a/arch/mips/alchemy/board-gpr.c
+++ b/arch/mips/alchemy/board-gpr.c
@@ -135,33 +135,33 @@
 	{
 		.name	= "kernel",
 		.size	= 0x00200000,
-		.offset	= 0,
+		.offset = 0,
 	},
 	{
 		.name	= "rootfs",
 		.size	= 0x00800000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 		.mask_flags = MTD_WRITEABLE,
 	},
 	{
 		.name	= "config",
 		.size	= 0x00200000,
-		.offset	= 0x01d00000,
+		.offset = 0x01d00000,
 	},
 	{
 		.name	= "yamon",
 		.size	= 0x00100000,
-		.offset	= 0x01c00000,
+		.offset = 0x01c00000,
 	},
 	{
 		.name	= "yamon env vars",
 		.size	= 0x00040000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 	},
 	{
 		.name	= "kernel+rootfs",
 		.size	= 0x00a00000,
-		.offset	= 0,
+		.offset = 0,
 	},
 };
 
diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c
index a124c25..4a9baa9 100644
--- a/arch/mips/alchemy/board-mtx1.c
+++ b/arch/mips/alchemy/board-mtx1.c
@@ -173,23 +173,23 @@
 	{
 		.name	= "filesystem",
 		.size	= 0x01C00000,
-		.offset	= 0,
+		.offset = 0,
 	},
 	{
 		.name	= "yamon",
 		.size	= 0x00100000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 		.mask_flags = MTD_WRITEABLE,
 	},
 	{
 		.name	= "kernel",
 		.size	= 0x002c0000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 	},
 	{
 		.name	= "yamon env",
 		.size	= 0x00040000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 	},
 };
 
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index cf02d7d..19d5642 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -252,7 +252,7 @@
 u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
        void (*callback)(int, void *), void *callparam)
 {
-	unsigned long   flags;
+	unsigned long	flags;
 	u32		used, chan;
 	u32		dcp;
 	int		i;
@@ -512,7 +512,7 @@
 		break;
 	}
 
-	/* If source input is FIFO, set static address.	*/
+	/* If source input is FIFO, set static address. */
 	if (stp->dev_flags & DEV_FLAGS_IN) {
 		if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
 			src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
@@ -635,7 +635,7 @@
 	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
 
-	/* Get next descriptor pointer.	*/
+	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
 	/* Return something non-zero. */
@@ -697,7 +697,7 @@
 	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
 
-	/* Get next descriptor pointer.	*/
+	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
 	/* Return something non-zero. */
@@ -742,7 +742,7 @@
 	*nbytes = dp->dscr_cmd1;
 	rv = dp->dscr_stat;
 
-	/* Get next descriptor pointer.	*/
+	/* Get next descriptor pointer. */
 	ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
 	/* Return something non-zero. */
@@ -891,7 +891,7 @@
 	chan_tab_t	 *ctp;
 	au1x_ddma_desc_t *dp;
 	dbdev_tab_t	 *stp, *dtp;
-	au1x_dma_chan_t  *cp;
+	au1x_dma_chan_t	 *cp;
 	u32 i		 = 0;
 
 	ctp = *((chan_tab_t **)chanid);
@@ -969,7 +969,7 @@
 	dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
 	ctp->chan_ptr->ddma_dbell = 0;
 
-	/* Get next descriptor pointer.	*/
+	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
 	/* Return something non-zero. */
diff --git a/arch/mips/alchemy/common/gpiolib.c b/arch/mips/alchemy/common/gpiolib.c
index f1b50f0..f9bc4f5 100644
--- a/arch/mips/alchemy/common/gpiolib.c
+++ b/arch/mips/alchemy/common/gpiolib.c
@@ -106,14 +106,14 @@
 		.ngpio			= ALCHEMY_GPIO1_NUM,
 	},
 	[1] = {
-		.label                  = "alchemy-gpio2",
-		.direction_input        = gpio2_direction_input,
-		.direction_output       = gpio2_direction_output,
-		.get                    = gpio2_get,
-		.set                    = gpio2_set,
+		.label			= "alchemy-gpio2",
+		.direction_input	= gpio2_direction_input,
+		.direction_output	= gpio2_direction_output,
+		.get			= gpio2_get,
+		.set			= gpio2_set,
 		.to_irq			= gpio2_to_irq,
-		.base                   = ALCHEMY_GPIO2_BASE,
-		.ngpio                  = ALCHEMY_GPIO2_NUM,
+		.base			= ALCHEMY_GPIO2_BASE,
+		.ngpio			= ALCHEMY_GPIO2_NUM,
 	},
 };
 
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index 94fbcd1..63a7181 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -84,20 +84,20 @@
  * needs the highest priority.
  */
 struct alchemy_irqmap au1000_irqmap[] __initdata = {
-	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1000_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
@@ -106,33 +106,33 @@
 	{ AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
-	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
 	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
 	{ AU1000_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1000_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ -1, },
 };
 
 struct alchemy_irqmap au1500_irqmap[] __initdata = {
-	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1500_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
@@ -141,31 +141,31 @@
 	{ AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
-	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
 	{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
 	{ AU1500_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1500_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ -1, },
 };
 
 struct alchemy_irqmap au1100_irqmap[] __initdata = {
-	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1100_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
@@ -174,33 +174,33 @@
 	{ AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
-	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
 	{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
 	{ AU1100_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1100_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ -1, },
 };
 
 struct alchemy_irqmap au1550_irqmap[] __initdata = {
-	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1550_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
@@ -210,26 +210,26 @@
 	{ AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
 	{ AU1550_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
 	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
-	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ -1, },
 };
 
 struct alchemy_irqmap au1200_irqmap[] __initdata = {
-	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1200_SWT_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ AU1200_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
@@ -239,9 +239,9 @@
 	{ AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
 	{ AU1200_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
-	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
-	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
 	{ -1, },
 };
 
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 7af941d..9837a13 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -53,7 +53,7 @@
 		.irq		= _irq,				\
 		.regshift	= 2,				\
 		.iotype		= UPIO_AU,			\
-		.flags		= UPF_SKIP_TEST | UPF_IOREMAP |	\
+		.flags		= UPF_SKIP_TEST | UPF_IOREMAP | \
 				  UPF_FIXED_TYPE,		\
 		.type		= PORT_16550A,			\
 		.pm		= alchemy_8250_pm,		\
@@ -137,7 +137,7 @@
 }
 
 static struct usb_ehci_pdata alchemy_ehci_pdata = {
-	.no_io_watchdog	= 1,
+	.no_io_watchdog = 1,
 	.power_on	= alchemy_ehci_power_on,
 	.power_off	= alchemy_ehci_power_off,
 	.power_suspend	= alchemy_ehci_power_off,
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 37ffd99..62b4e7b 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -59,7 +59,7 @@
 		/* Clear to obtain best system bus performance */
 		clear_c0_config(1 << 19); /* Clear Config[OD] */
 
-	board_setup();  /* board specific setup */
+	board_setup();	/* board specific setup */
 
 	/* IO/MEM resources. */
 	set_io_port_base(0);
diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
index c7bcc7e..706d933 100644
--- a/arch/mips/alchemy/common/sleeper.S
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -102,12 +102,12 @@
 	cache	0x14, 96(t0)
 	.set	mips0
 
-1:	lui 	a0, 0xb400		/* mem_xxx */
-	sw	zero, 0x001c(a0) 	/* Precharge */
+1:	lui	a0, 0xb400		/* mem_xxx */
+	sw	zero, 0x001c(a0)	/* Precharge */
 	sync
 	sw	zero, 0x0020(a0)	/* Auto Refresh */
 	sync
-	sw	zero, 0x0030(a0)  	/* Sleep */
+	sw	zero, 0x0030(a0)	/* Sleep */
 	sync
 
 	DO_SLEEP
@@ -128,15 +128,15 @@
 	cache	0x14, 96(t0)
 	.set	mips0
 
-1:	lui 	a0, 0xb400		/* mem_xxx */
-	sw	zero, 0x08c0(a0) 	/* Precharge */
+1:	lui	a0, 0xb400		/* mem_xxx */
+	sw	zero, 0x08c0(a0)	/* Precharge */
 	sync
 	sw	zero, 0x08d0(a0)	/* Self Refresh */
 	sync
 
 	/* wait for sdram to enter self-refresh mode */
-	lui 	t0, 0x0100
-2:	lw 	t1, 0x0850(a0)		/* mem_sdstat */
+	lui	t0, 0x0100
+2:	lw	t1, 0x0850(a0)		/* mem_sdstat */
 	and	t2, t1, t0
 	beq	t2, zero, 2b
 	 nop
@@ -144,9 +144,9 @@
 	/* disable SDRAM clocks */
 	lui	t0, 0xcfff
 	ori	t0, t0, 0xffff
-	lw 	t1, 0x0840(a0)		/* mem_sdconfiga */
-	and 	t1, t0, t1		/* clear CE[1:0] */
-	sw 	t1, 0x0840(a0)		/* mem_sdconfiga */
+	lw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	and	t1, t0, t1		/* clear CE[1:0] */
+	sw	t1, 0x0840(a0)		/* mem_sdconfiga */
 	sync
 
 	DO_SLEEP
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index b67930d..38afb11 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -85,7 +85,7 @@
 	.name		= "rtcmatch2",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
 	.rating		= 1500,
-	.set_next_event	= au1x_rtcmatch2_set_next_event,
+	.set_next_event = au1x_rtcmatch2_set_next_event,
 	.set_mode	= au1x_rtcmatch2_set_mode,
 	.cpumask	= cpu_all_mask,
 };
diff --git a/arch/mips/alchemy/common/usb.c b/arch/mips/alchemy/common/usb.c
index 936af83..fcc6956 100644
--- a/arch/mips/alchemy/common/usb.c
+++ b/arch/mips/alchemy/common/usb.c
@@ -122,7 +122,7 @@
 	unsigned long r;
 
 	if (enable) {
-		__raw_writel(1, base + USB_DWC_CTRL7);  /* start OHCI clock */
+		__raw_writel(1, base + USB_DWC_CTRL7);	/* start OHCI clock */
 		wmb();
 
 		r = __raw_readl(base + USB_DWC_CTRL3);	/* enable OHCI block */
diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c
index f2039ef..c98c9ea 100644
--- a/arch/mips/alchemy/devboards/bcsr.c
+++ b/arch/mips/alchemy/devboards/bcsr.c
@@ -20,7 +20,7 @@
 	spinlock_t lock;
 } bcsr_regs[BCSR_CNT];
 
-static void __iomem *bcsr_virt;	/* KSEG1 addr of BCSR base */
+static void __iomem *bcsr_virt; /* KSEG1 addr of BCSR base */
 static int bcsr_csc_base;	/* linux-irq of first cascaded irq */
 
 void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys)
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c
index 8187845..11f3ad2 100644
--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -276,7 +276,7 @@
 }
 
 static struct led_classdev db1100_mmc_led = {
-	.brightness_set	= db1100_mmcled_set,
+	.brightness_set = db1100_mmcled_set,
 };
 
 static int db1100_mmc1_card_readonly(void *mmc_host)
@@ -314,7 +314,7 @@
 }
 
 static struct led_classdev db1100_mmc1_led = {
-	.brightness_set	= db1100_mmc1led_set,
+	.brightness_set = db1100_mmc1led_set,
 };
 
 static struct au1xmmc_platform_data db1100_mmc_platdata[2] = {
@@ -357,7 +357,7 @@
 	}
 };
 
-static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
+static u64 au1xxx_mmc_dmamask =	 DMA_BIT_MASK(32);
 
 static struct platform_device db1100_mmc0_dev = {
 	.name		= "au1xxx-mmc",
@@ -482,7 +482,7 @@
 		.mode		 = 0,
 		.irq		 = AU1100_GPIO21_INT,
 		.platform_data	 = &db1100_touch_pd,
-		.controller_data = (void *)210,	/* for spi_gpio: CS# GPIO210 */
+		.controller_data = (void *)210, /* for spi_gpio: CS# GPIO210 */
 	},
 };
 
@@ -572,7 +572,7 @@
 		irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_LOW);
 		irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
 		/* EPSON S1D13806 0x1b000000
-		 * SRAM 1MB/2MB   0x1a000000
+		 * SRAM 1MB/2MB	  0x1a000000
 		 * DS1693 RTC	  0x0c000000
 		 */
 	} else if (board == BCSR_WHOAMI_PB1100) {
@@ -586,7 +586,7 @@
 		irq_set_irq_type(AU1100_GPIO12_INT, IRQ_TYPE_LEVEL_LOW);
 		irq_set_irq_type(AU1100_GPIO13_INT, IRQ_TYPE_LEVEL_LOW);
 		/* EPSON S1D13806 0x1b000000
-		 * SRAM 1MB/2MB   0x1a000000
+		 * SRAM 1MB/2MB	  0x1a000000
 		 * DiskOnChip	  0x0d000000
 		 * DS1693 RTC	  0x0c000000
 		 */
@@ -605,7 +605,7 @@
 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
 		AU1000_PCMCIA_IO_PHYS_ADDR,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		c0, d0,	/*s0*/0, 0, 0);
+		c0, d0, /*s0*/0, 0, 0);
 
 	if (twosocks) {
 		irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH);
@@ -619,7 +619,7 @@
 			AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
 			AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
 			AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
-			c1, d1,	/*s1*/0, 0, 1);
+			c1, d1, /*s1*/0, 0, 1);
 	}
 
 	platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs));
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index 299b7d2..a84d98b 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -90,14 +90,14 @@
 
 	whoami = bcsr_read(BCSR_WHOAMI);
 	printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
-		"  Board-ID %d  Daughtercard ID %d\n", get_system_type(),
+		"  Board-ID %d	Daughtercard ID %d\n", get_system_type(),
 		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
 
 	/* SMBus/SPI on PSC0, Audio on PSC1 */
 	pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
 	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
 	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
-	pfc |= SYS_PINFUNC_P1C;	/* SPI is configured later */
+	pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
 	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
 	wmb();
 
@@ -129,7 +129,7 @@
 static struct mtd_partition db1200_spiflash_parts[] = {
 	{
 		.name	= "spi_flash",
-		.offset	= 0,
+		.offset = 0,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -200,12 +200,12 @@
 static struct mtd_partition db1200_nand_parts[] = {
 	{
 		.name	= "NAND FS 0",
-		.offset	= 0,
+		.offset = 0,
 		.size	= 8 * 1024 * 1024,
 	},
 	{
 		.name	= "NAND FS 1",
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 		.size	= MTDPART_SIZ_FULL
 	},
 };
@@ -395,7 +395,7 @@
 }
 
 static struct led_classdev db1200_mmc_led = {
-	.brightness_set	= db1200_mmcled_set,
+	.brightness_set = db1200_mmcled_set,
 };
 
 /* -- */
@@ -463,7 +463,7 @@
 }
 
 static struct led_classdev pb1200_mmc1_led = {
-	.brightness_set	= pb1200_mmc1led_set,
+	.brightness_set = pb1200_mmc1led_set,
 };
 
 static void pb1200_mmc1_set_power(void *mmc_host, int state)
@@ -526,7 +526,7 @@
 	}
 };
 
-static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
+static u64 au1xxx_mmc_dmamask =	 DMA_BIT_MASK(32);
 
 static struct platform_device db1200_mmc0_dev = {
 	.name		= "au1xxx-mmc",
@@ -601,7 +601,7 @@
 static struct au1200fb_platdata db1200fb_pd = {
 	.panel_index	= db1200fb_panel_index,
 	.panel_init	= db1200fb_panel_init,
-	.panel_shutdown	= db1200fb_panel_shutdown,
+	.panel_shutdown = db1200fb_panel_shutdown,
 };
 
 static struct resource au1200_lcd_res[] = {
@@ -772,11 +772,11 @@
 	}
 
 	db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR;
-	db1200_nand_res[0].end   = PB1200_NAND_PHYS_ADDR + 0xff;
+	db1200_nand_res[0].end	 = PB1200_NAND_PHYS_ADDR + 0xff;
 	db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR;
-	db1200_ide_res[0].end   = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
+	db1200_ide_res[0].end	= PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
 	db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR;
-	db1200_eth_res[0].end   = PB1200_ETH_PHYS_ADDR + 0xff;
+	db1200_eth_res[0].end	= PB1200_ETH_PHYS_ADDR + 0xff;
 	return 0;
 }
 
@@ -797,7 +797,7 @@
 	irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW);
 	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
 
-	/* insert/eject pairs: one of both is always screaming.  To avoid
+	/* insert/eject pairs: one of both is always screaming.	 To avoid
 	 * issues they must not be automatically enabled when initially
 	 * requested.
 	 */
@@ -813,7 +813,7 @@
 	spi_register_board_info(db1200_spi_devs,
 				ARRAY_SIZE(db1200_i2c_devs));
 
-	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C  ON=SPI)
+	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C	 ON=SPI)
 	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
 	 *		or S12 on the PB1200.
 	 */
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
index cdf37cb..6167e73 100644
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -80,7 +80,7 @@
 	AU1300_PIN_PSC0D1,
 	AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
 	AU1300_PIN_PSC1D1,
-	AU1300_PIN_PSC2SYNC0,                       AU1300_PIN_PSC2D0,
+	AU1300_PIN_PSC2SYNC0,			    AU1300_PIN_PSC2D0,
 	AU1300_PIN_PSC2D1,
 	AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
 	AU1300_PIN_PSC3D1,
@@ -143,12 +143,12 @@
 static struct mtd_partition db1300_nand_parts[] = {
 	{
 		.name	= "NAND FS 0",
-		.offset	= 0,
+		.offset = 0,
 		.size	= 8 * 1024 * 1024,
 	},
 	{
 		.name	= "NAND FS 1",
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 		.size	= MTDPART_SIZ_FULL
 	},
 };
@@ -487,7 +487,7 @@
 }
 
 static struct led_classdev db1300_mmc_led = {
-	.brightness_set	= db1300_mmcled_set,
+	.brightness_set = db1300_mmcled_set,
 };
 
 struct au1xmmc_platform_data db1300_sd1_platdata = {
@@ -646,7 +646,7 @@
 static struct au1200fb_platdata db1300fb_pd = {
 	.panel_index	= db1300fb_panel_index,
 	.panel_init	= db1300fb_panel_init,
-	.panel_shutdown	= db1300fb_panel_shutdown,
+	.panel_shutdown = db1300fb_panel_shutdown,
 };
 
 static struct resource au1300_lcd_res[] = {
diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c
index 5a9ae60..016cdda 100644
--- a/arch/mips/alchemy/devboards/db1550.c
+++ b/arch/mips/alchemy/devboards/db1550.c
@@ -67,7 +67,7 @@
 		bcsr_init(PB1550_BCSR_PHYS_ADDR,
 			  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
 
-	pr_info("Alchemy/AMD %s Board, CPLD Rev %d Board-ID %d  "	\
+	pr_info("Alchemy/AMD %s Board, CPLD Rev %d Board-ID %d	"	\
 		"Daughtercard ID %d\n", get_system_type(),
 		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
 
@@ -80,7 +80,7 @@
 static struct mtd_partition db1550_spiflash_parts[] = {
 	{
 		.name	= "spi_flash",
-		.offset	= 0,
+		.offset = 0,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -151,12 +151,12 @@
 static struct mtd_partition db1550_nand_parts[] = {
 	{
 		.name	= "NAND FS 0",
-		.offset	= 0,
+		.offset = 0,
 		.size	= 8 * 1024 * 1024,
 	},
 	{
 		.name	= "NAND FS 1",
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 		.size	= MTDPART_SIZ_FULL
 	},
 };
@@ -495,10 +495,10 @@
 {
 	alchemy_gpio_direction_output(203, 0);	/* red led on */
 
-	irq_set_irq_type(AU1550_GPIO0_INT, IRQ_TYPE_EDGE_BOTH);  /* CD0# */
-	irq_set_irq_type(AU1550_GPIO1_INT, IRQ_TYPE_EDGE_BOTH);  /* CD1# */
-	irq_set_irq_type(AU1550_GPIO3_INT, IRQ_TYPE_LEVEL_LOW);  /* CARD0# */
-	irq_set_irq_type(AU1550_GPIO5_INT, IRQ_TYPE_LEVEL_LOW);  /* CARD1# */
+	irq_set_irq_type(AU1550_GPIO0_INT, IRQ_TYPE_EDGE_BOTH);	 /* CD0# */
+	irq_set_irq_type(AU1550_GPIO1_INT, IRQ_TYPE_EDGE_BOTH);	 /* CD1# */
+	irq_set_irq_type(AU1550_GPIO3_INT, IRQ_TYPE_LEVEL_LOW);	 /* CARD0# */
+	irq_set_irq_type(AU1550_GPIO5_INT, IRQ_TYPE_LEVEL_LOW);	 /* CARD1# */
 	irq_set_irq_type(AU1550_GPIO21_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG0# */
 	irq_set_irq_type(AU1550_GPIO22_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG1# */
 
@@ -539,7 +539,7 @@
 
 	/* Pb1550, like all others, also has statuschange irqs; however they're
 	* wired up on one of the Au1550's shared GPIO201_205 line, which also
-	* services the PCMCIA card interrupts.  So we ignore statuschange and
+	* services the PCMCIA card interrupts.	So we ignore statuschange and
 	* use the GPIO201_205 exclusively for card interrupts, since a) pcmcia
 	* drivers are used to shared irqs and b) statuschange isn't really use-
 	* ful anyway.
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index acaf91b..b86bff3 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -194,7 +194,7 @@
 }
 
 #define ATTR(x)							\
-	static struct kobj_attribute x##_attribute = 		\
+	static struct kobj_attribute x##_attribute =		\
 		__ATTR(x, 0664, db1x_pmattr_show,		\
 				db1x_pmattr_store);
 
diff --git a/arch/mips/ar7/Platform b/arch/mips/ar7/Platform
index 0bf85c4..21f9102 100644
--- a/arch/mips/ar7/Platform
+++ b/arch/mips/ar7/Platform
@@ -1,6 +1,6 @@
 #
 # Texas Instruments AR7
 #
-platform-$(CONFIG_AR7)          += ar7/
-cflags-$(CONFIG_AR7)            += -I$(srctree)/arch/mips/include/asm/mach-ar7
-load-$(CONFIG_AR7)              += 0xffffffff94100000
+platform-$(CONFIG_AR7)		+= ar7/
+cflags-$(CONFIG_AR7)		+= -I$(srctree)/arch/mips/include/asm/mach-ar7
+load-$(CONFIG_AR7)		+= 0xffffffff94100000
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 7477fd21..7e2356f 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -492,11 +492,11 @@
 		.active_low		= 1,
 		.default_trigger	= "default-on",
 	},
-        {
-                .name                   = "ethernet",
-                .gpio                   = 10,
-                .active_low             = 1,
-        },
+	{
+		.name			= "ethernet",
+		.gpio			= 10,
+		.active_low		= 1,
+	},
 };
 
 static struct gpio_led_platform_data ar7_led_data;
@@ -512,7 +512,7 @@
 {
 	char *prid, *usb_prod;
 
-	/* Default LEDs	*/
+	/* Default LEDs */
 	ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
 	ar7_led_data.leds = default_leds;
 
diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index f44feee..3995e31 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -14,6 +14,18 @@
 	  Say 'Y' here if you want your kernel to support the
 	  Atheros AP121 reference board.
 
+config ATH79_MACH_AP136
+	bool "Atheros AP136 reference board"
+	select SOC_QCA955X
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_SPI
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Atheros AP136 reference board.
+
 config ATH79_MACH_AP81
 	bool "Atheros AP81 reference board"
 	select SOC_AR913X
@@ -88,6 +100,12 @@
 	select PCI_AR724X if PCI
 	def_bool n
 
+config SOC_QCA955X
+	select USB_ARCH_HAS_EHCI
+	select HW_HAS_PCI
+	select PCI_AR724X if PCI
+	def_bool n
+
 config PCI_AR724X
 	def_bool n
 
@@ -104,7 +122,7 @@
 	def_bool n
 
 config ATH79_DEV_WMAC
-	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X)
+	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
 	def_bool n
 
 endif
diff --git a/arch/mips/ath79/Makefile b/arch/mips/ath79/Makefile
index 2b54d98..5c9ff69 100644
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -27,6 +27,7 @@
 # Machines
 #
 obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-ap121.o
+obj-$(CONFIG_ATH79_MACH_AP136)		+= mach-ap136.o
 obj-$(CONFIG_ATH79_MACH_AP81)		+= mach-ap81.o
 obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-db120.o
 obj-$(CONFIG_ATH79_MACH_PB44)		+= mach-pb44.o
diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index 579f452..765ef30 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -198,7 +198,7 @@
 	dpll_base = ioremap(AR934X_SRIF_BASE, AR934X_SRIF_SIZE);
 
 	bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-	if (bootstrap &	AR934X_BOOTSTRAP_REF_CLK_40)
+	if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
 		ath79_ref_clk.rate = 40 * 1000 * 1000;
 	else
 		ath79_ref_clk.rate = 25 * 1000 * 1000;
@@ -295,6 +295,82 @@
 	iounmap(dpll_base);
 }
 
+static void __init qca955x_clocks_init(void)
+{
+	u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
+	u32 cpu_pll, ddr_pll;
+	u32 bootstrap;
+
+	bootstrap = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
+	if (bootstrap &	QCA955X_BOOTSTRAP_REF_CLK_40)
+		ath79_ref_clk.rate = 40 * 1000 * 1000;
+	else
+		ath79_ref_clk.rate = 25 * 1000 * 1000;
+
+	pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG);
+	out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+		  QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
+	ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+		  QCA955X_PLL_CPU_CONFIG_REFDIV_MASK;
+	nint = (pll >> QCA955X_PLL_CPU_CONFIG_NINT_SHIFT) &
+	       QCA955X_PLL_CPU_CONFIG_NINT_MASK;
+	frac = (pll >> QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
+	       QCA955X_PLL_CPU_CONFIG_NFRAC_MASK;
+
+	cpu_pll = nint * ath79_ref_clk.rate / ref_div;
+	cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
+	cpu_pll /= (1 << out_div);
+
+	pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG);
+	out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+		  QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK;
+	ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+		  QCA955X_PLL_DDR_CONFIG_REFDIV_MASK;
+	nint = (pll >> QCA955X_PLL_DDR_CONFIG_NINT_SHIFT) &
+	       QCA955X_PLL_DDR_CONFIG_NINT_MASK;
+	frac = (pll >> QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
+	       QCA955X_PLL_DDR_CONFIG_NFRAC_MASK;
+
+	ddr_pll = nint * ath79_ref_clk.rate / ref_div;
+	ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
+	ddr_pll /= (1 << out_div);
+
+	clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG);
+
+	postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
+		  QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
+
+	if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
+		ath79_cpu_clk.rate = ath79_ref_clk.rate;
+	else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
+		ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
+	else
+		ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
+
+	postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
+		  QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
+
+	if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
+		ath79_ddr_clk.rate = ath79_ref_clk.rate;
+	else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
+		ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
+	else
+		ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
+
+	postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
+		  QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
+
+	if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
+		ath79_ahb_clk.rate = ath79_ref_clk.rate;
+	else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
+		ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
+	else
+		ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
+
+	ath79_wdt_clk.rate = ath79_ref_clk.rate;
+	ath79_uart_clk.rate = ath79_ref_clk.rate;
+}
+
 void __init ath79_clocks_init(void)
 {
 	if (soc_is_ar71xx())
@@ -307,6 +383,8 @@
 		ar933x_clocks_init();
 	else if (soc_is_ar934x())
 		ar934x_clocks_init();
+	else if (soc_is_qca955x())
+		qca955x_clocks_init();
 	else
 		BUG();
 
diff --git a/arch/mips/ath79/common.c b/arch/mips/ath79/common.c
index 5a4adfc..eb3966c 100644
--- a/arch/mips/ath79/common.c
+++ b/arch/mips/ath79/common.c
@@ -72,6 +72,8 @@
 		reg = AR933X_RESET_REG_RESET_MODULE;
 	else if (soc_is_ar934x())
 		reg = AR934X_RESET_REG_RESET_MODULE;
+	else if (soc_is_qca955x())
+		reg = QCA955X_RESET_REG_RESET_MODULE;
 	else
 		BUG();
 
@@ -98,6 +100,8 @@
 		reg = AR933X_RESET_REG_RESET_MODULE;
 	else if (soc_is_ar934x())
 		reg = AR934X_RESET_REG_RESET_MODULE;
+	else if (soc_is_qca955x())
+		reg = QCA955X_RESET_REG_RESET_MODULE;
 	else
 		BUG();
 
diff --git a/arch/mips/ath79/dev-common.c b/arch/mips/ath79/dev-common.c
index 45efc63..9516aab 100644
--- a/arch/mips/ath79/dev-common.c
+++ b/arch/mips/ath79/dev-common.c
@@ -36,7 +36,7 @@
 static struct plat_serial8250_port ath79_uart_data[] = {
 	{
 		.mapbase	= AR71XX_UART_BASE,
-		.irq		= ATH79_MISC_IRQ_UART,
+		.irq		= ATH79_MISC_IRQ(3),
 		.flags		= AR71XX_UART_FLAGS,
 		.iotype		= UPIO_MEM32,
 		.regshift	= 2,
@@ -62,8 +62,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= ATH79_MISC_IRQ_UART,
-		.end	= ATH79_MISC_IRQ_UART,
+		.start	= ATH79_MISC_IRQ(3),
+		.end	= ATH79_MISC_IRQ(3),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -90,7 +90,8 @@
 	if (soc_is_ar71xx() ||
 	    soc_is_ar724x() ||
 	    soc_is_ar913x() ||
-	    soc_is_ar934x()) {
+	    soc_is_ar934x() ||
+	    soc_is_qca955x()) {
 		ath79_uart_data[0].uartclk = clk_get_rate(clk);
 		platform_device_register(&ath79_uart_device);
 	} else if (soc_is_ar933x()) {
diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c
index bd2bc10..8227265 100644
--- a/arch/mips/ath79/dev-usb.c
+++ b/arch/mips/ath79/dev-usb.c
@@ -25,29 +25,11 @@
 #include "common.h"
 #include "dev-usb.h"
 
-static struct resource ath79_ohci_resources[2];
-
-static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32);
+static u64 ath79_usb_dmamask = DMA_BIT_MASK(32);
 
 static struct usb_ohci_pdata ath79_ohci_pdata = {
 };
 
-static struct platform_device ath79_ohci_device = {
-	.name		= "ohci-platform",
-	.id		= -1,
-	.resource	= ath79_ohci_resources,
-	.num_resources	= ARRAY_SIZE(ath79_ohci_resources),
-	.dev = {
-		.dma_mask		= &ath79_ohci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &ath79_ohci_pdata,
-	},
-};
-
-static struct resource ath79_ehci_resources[2];
-
-static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32);
-
 static struct usb_ehci_pdata ath79_ehci_pdata_v1 = {
 	.has_synopsys_hc_bug	= 1,
 };
@@ -57,22 +39,16 @@
 	.has_tt			= 1,
 };
 
-static struct platform_device ath79_ehci_device = {
-	.name		= "ehci-platform",
-	.id		= -1,
-	.resource	= ath79_ehci_resources,
-	.num_resources	= ARRAY_SIZE(ath79_ehci_resources),
-	.dev = {
-		.dma_mask		= &ath79_ehci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static void __init ath79_usb_init_resource(struct resource res[2],
-					   unsigned long base,
-					   unsigned long size,
-					   int irq)
+static void __init ath79_usb_register(const char *name, int id,
+				      unsigned long base, unsigned long size,
+				      int irq, const void *data,
+				      size_t data_size)
 {
+	struct resource res[2];
+	struct platform_device *pdev;
+
+	memset(res, 0, sizeof(res));
+
 	res[0].flags = IORESOURCE_MEM;
 	res[0].start = base;
 	res[0].end = base + size - 1;
@@ -80,6 +56,19 @@
 	res[1].flags = IORESOURCE_IRQ;
 	res[1].start = irq;
 	res[1].end = irq;
+
+	pdev = platform_device_register_resndata(NULL, name, id,
+						 res, ARRAY_SIZE(res),
+						 data, data_size);
+
+	if (IS_ERR(pdev)) {
+		pr_err("ath79: unable to register USB at %08lx, err=%d\n",
+		       base, (int) PTR_ERR(pdev));
+		return;
+	}
+
+	pdev->dev.dma_mask = &ath79_usb_dmamask;
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 }
 
 #define AR71XX_USB_RESET_MASK	(AR71XX_RESET_USB_HOST | \
@@ -106,14 +95,15 @@
 
 	mdelay(900);
 
-	ath79_usb_init_resource(ath79_ohci_resources, AR71XX_OHCI_BASE,
-				AR71XX_OHCI_SIZE, ATH79_MISC_IRQ_OHCI);
-	platform_device_register(&ath79_ohci_device);
+	ath79_usb_register("ohci-platform", -1,
+			   AR71XX_OHCI_BASE, AR71XX_OHCI_SIZE,
+			   ATH79_MISC_IRQ(6),
+			   &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
 
-	ath79_usb_init_resource(ath79_ehci_resources, AR71XX_EHCI_BASE,
-				AR71XX_EHCI_SIZE, ATH79_CPU_IRQ_USB);
-	ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v1;
-	platform_device_register(&ath79_ehci_device);
+	ath79_usb_register("ehci-platform", -1,
+			   AR71XX_EHCI_BASE, AR71XX_EHCI_SIZE,
+			   ATH79_CPU_IRQ(3),
+			   &ath79_ehci_pdata_v1, sizeof(ath79_ehci_pdata_v1));
 }
 
 static void __init ar7240_usb_setup(void)
@@ -135,9 +125,10 @@
 
 	iounmap(usb_ctrl_base);
 
-	ath79_usb_init_resource(ath79_ohci_resources, AR7240_OHCI_BASE,
-				AR7240_OHCI_SIZE, ATH79_CPU_IRQ_USB);
-	platform_device_register(&ath79_ohci_device);
+	ath79_usb_register("ohci-platform", -1,
+			   AR7240_OHCI_BASE, AR7240_OHCI_SIZE,
+			   ATH79_CPU_IRQ(3),
+			   &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
 }
 
 static void __init ar724x_usb_setup(void)
@@ -151,10 +142,10 @@
 	ath79_device_reset_clear(AR724X_RESET_USB_PHY);
 	mdelay(10);
 
-	ath79_usb_init_resource(ath79_ehci_resources, AR724X_EHCI_BASE,
-				AR724X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
-	ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
-	platform_device_register(&ath79_ehci_device);
+	ath79_usb_register("ehci-platform", -1,
+			   AR724X_EHCI_BASE, AR724X_EHCI_SIZE,
+			   ATH79_CPU_IRQ(3),
+			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
 }
 
 static void __init ar913x_usb_setup(void)
@@ -168,10 +159,10 @@
 	ath79_device_reset_clear(AR913X_RESET_USB_PHY);
 	mdelay(10);
 
-	ath79_usb_init_resource(ath79_ehci_resources, AR913X_EHCI_BASE,
-				AR913X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
-	ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
-	platform_device_register(&ath79_ehci_device);
+	ath79_usb_register("ehci-platform", -1,
+			   AR913X_EHCI_BASE, AR913X_EHCI_SIZE,
+			   ATH79_CPU_IRQ(3),
+			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
 }
 
 static void __init ar933x_usb_setup(void)
@@ -185,10 +176,10 @@
 	ath79_device_reset_clear(AR933X_RESET_USB_PHY);
 	mdelay(10);
 
-	ath79_usb_init_resource(ath79_ehci_resources, AR933X_EHCI_BASE,
-				AR933X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
-	ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
-	platform_device_register(&ath79_ehci_device);
+	ath79_usb_register("ehci-platform", -1,
+			   AR933X_EHCI_BASE, AR933X_EHCI_SIZE,
+			   ATH79_CPU_IRQ(3),
+			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
 }
 
 static void __init ar934x_usb_setup(void)
@@ -211,10 +202,23 @@
 	ath79_device_reset_clear(AR934X_RESET_USB_HOST);
 	udelay(1000);
 
-	ath79_usb_init_resource(ath79_ehci_resources, AR934X_EHCI_BASE,
-				AR934X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
-	ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
-	platform_device_register(&ath79_ehci_device);
+	ath79_usb_register("ehci-platform", -1,
+			   AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
+			   ATH79_CPU_IRQ(3),
+			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+}
+
+static void __init qca955x_usb_setup(void)
+{
+	ath79_usb_register("ehci-platform", 0,
+			   QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
+			   ATH79_IP3_IRQ(0),
+			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+
+	ath79_usb_register("ehci-platform", 1,
+			   QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE,
+			   ATH79_IP3_IRQ(1),
+			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
 }
 
 void __init ath79_register_usb(void)
@@ -231,6 +235,8 @@
 		ar933x_usb_setup();
 	else if (soc_is_ar934x())
 		ar934x_usb_setup();
+	else if (soc_is_qca955x())
+		qca955x_usb_setup();
 	else
 		BUG();
 }
diff --git a/arch/mips/ath79/dev-wmac.c b/arch/mips/ath79/dev-wmac.c
index d6d893c..da190b1 100644
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -55,8 +55,8 @@
 
 	ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
 	ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
-	ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
-	ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
+	ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
+	ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
 }
 
 
@@ -83,8 +83,8 @@
 
 	ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
 	ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
-	ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
-	ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
+	ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
+	ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
 
 	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
 	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
@@ -107,7 +107,7 @@
 	ath79_wmac_resources[0].start = AR934X_WMAC_BASE;
 	ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
 	ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
-	ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
+	ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
 
 	t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
 	if (t & AR934X_BOOTSTRAP_REF_CLK_40)
@@ -116,6 +116,24 @@
 		ath79_wmac_data.is_clk_25mhz = true;
 }
 
+static void qca955x_wmac_setup(void)
+{
+	u32 t;
+
+	ath79_wmac_device.name = "qca955x_wmac";
+
+	ath79_wmac_resources[0].start = QCA955X_WMAC_BASE;
+	ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1;
+	ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
+	ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
+
+	t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
+	if (t & QCA955X_BOOTSTRAP_REF_CLK_40)
+		ath79_wmac_data.is_clk_25mhz = false;
+	else
+		ath79_wmac_data.is_clk_25mhz = true;
+}
+
 void __init ath79_register_wmac(u8 *cal_data)
 {
 	if (soc_is_ar913x())
@@ -124,6 +142,8 @@
 		ar933x_wmac_setup();
 	else if (soc_is_ar934x())
 		ar934x_wmac_setup();
+	else if (soc_is_qca955x())
+		qca955x_wmac_setup();
 	else
 		BUG();
 
diff --git a/arch/mips/ath79/early_printk.c b/arch/mips/ath79/early_printk.c
index dc938cb..b955faf 100644
--- a/arch/mips/ath79/early_printk.c
+++ b/arch/mips/ath79/early_printk.c
@@ -74,6 +74,8 @@
 	case REV_ID_MAJOR_AR9341:
 	case REV_ID_MAJOR_AR9342:
 	case REV_ID_MAJOR_AR9344:
+	case REV_ID_MAJOR_QCA9556:
+	case REV_ID_MAJOR_QCA9558:
 		_prom_putchar = prom_putchar_ar71xx;
 		break;
 
diff --git a/arch/mips/ath79/gpio.c b/arch/mips/ath79/gpio.c
index 48fe762..8d025b0 100644
--- a/arch/mips/ath79/gpio.c
+++ b/arch/mips/ath79/gpio.c
@@ -137,51 +137,47 @@
 	.base			= 0,
 };
 
-void ath79_gpio_function_enable(u32 mask)
+static void __iomem *ath79_gpio_get_function_reg(void)
 {
-	void __iomem *base = ath79_gpio_base;
-	unsigned long flags;
+	u32 reg = 0;
 
-	spin_lock_irqsave(&ath79_gpio_lock, flags);
+	if (soc_is_ar71xx() ||
+	    soc_is_ar724x() ||
+	    soc_is_ar913x() ||
+	    soc_is_ar933x())
+		reg = AR71XX_GPIO_REG_FUNC;
+	else if (soc_is_ar934x())
+		reg = AR934X_GPIO_REG_FUNC;
+	else
+		BUG();
 
-	__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_FUNC) | mask,
-		     base + AR71XX_GPIO_REG_FUNC);
-	/* flush write */
-	__raw_readl(base + AR71XX_GPIO_REG_FUNC);
-
-	spin_unlock_irqrestore(&ath79_gpio_lock, flags);
-}
-
-void ath79_gpio_function_disable(u32 mask)
-{
-	void __iomem *base = ath79_gpio_base;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ath79_gpio_lock, flags);
-
-	__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_FUNC) & ~mask,
-		     base + AR71XX_GPIO_REG_FUNC);
-	/* flush write */
-	__raw_readl(base + AR71XX_GPIO_REG_FUNC);
-
-	spin_unlock_irqrestore(&ath79_gpio_lock, flags);
+	return ath79_gpio_base + reg;
 }
 
 void ath79_gpio_function_setup(u32 set, u32 clear)
 {
-	void __iomem *base = ath79_gpio_base;
+	void __iomem *reg = ath79_gpio_get_function_reg();
 	unsigned long flags;
 
 	spin_lock_irqsave(&ath79_gpio_lock, flags);
 
-	__raw_writel((__raw_readl(base + AR71XX_GPIO_REG_FUNC) & ~clear) | set,
-		     base + AR71XX_GPIO_REG_FUNC);
+	__raw_writel((__raw_readl(reg) & ~clear) | set, reg);
 	/* flush write */
-	__raw_readl(base + AR71XX_GPIO_REG_FUNC);
+	__raw_readl(reg);
 
 	spin_unlock_irqrestore(&ath79_gpio_lock, flags);
 }
 
+void ath79_gpio_function_enable(u32 mask)
+{
+	ath79_gpio_function_setup(mask, 0);
+}
+
+void ath79_gpio_function_disable(u32 mask)
+{
+	ath79_gpio_function_setup(0, mask);
+}
+
 void __init ath79_gpio_init(void)
 {
 	int err;
@@ -198,12 +194,14 @@
 		ath79_gpio_count = AR933X_GPIO_COUNT;
 	else if (soc_is_ar934x())
 		ath79_gpio_count = AR934X_GPIO_COUNT;
+	else if (soc_is_qca955x())
+		ath79_gpio_count = QCA955X_GPIO_COUNT;
 	else
 		BUG();
 
 	ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
 	ath79_gpio_chip.ngpio = ath79_gpio_count;
-	if (soc_is_ar934x()) {
+	if (soc_is_ar934x() || soc_is_qca955x()) {
 		ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
 		ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
 	}
diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c
index 90d09fc..9c0e176 100644
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -35,44 +35,17 @@
 	pending = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS) &
 		  __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
 
-	if (pending & MISC_INT_UART)
-		generic_handle_irq(ATH79_MISC_IRQ_UART);
-
-	else if (pending & MISC_INT_DMA)
-		generic_handle_irq(ATH79_MISC_IRQ_DMA);
-
-	else if (pending & MISC_INT_PERFC)
-		generic_handle_irq(ATH79_MISC_IRQ_PERFC);
-
-	else if (pending & MISC_INT_TIMER)
-		generic_handle_irq(ATH79_MISC_IRQ_TIMER);
-
-	else if (pending & MISC_INT_TIMER2)
-		generic_handle_irq(ATH79_MISC_IRQ_TIMER2);
-
-	else if (pending & MISC_INT_TIMER3)
-		generic_handle_irq(ATH79_MISC_IRQ_TIMER3);
-
-	else if (pending & MISC_INT_TIMER4)
-		generic_handle_irq(ATH79_MISC_IRQ_TIMER4);
-
-	else if (pending & MISC_INT_OHCI)
-		generic_handle_irq(ATH79_MISC_IRQ_OHCI);
-
-	else if (pending & MISC_INT_ERROR)
-		generic_handle_irq(ATH79_MISC_IRQ_ERROR);
-
-	else if (pending & MISC_INT_GPIO)
-		generic_handle_irq(ATH79_MISC_IRQ_GPIO);
-
-	else if (pending & MISC_INT_WDOG)
-		generic_handle_irq(ATH79_MISC_IRQ_WDOG);
-
-	else if (pending & MISC_INT_ETHSW)
-		generic_handle_irq(ATH79_MISC_IRQ_ETHSW);
-
-	else
+	if (!pending) {
 		spurious_interrupt();
+		return;
+	}
+
+	while (pending) {
+		int bit = __ffs(pending);
+
+		generic_handle_irq(ATH79_MISC_IRQ(bit));
+		pending &= ~BIT(bit);
+	}
 }
 
 static void ar71xx_misc_irq_unmask(struct irq_data *d)
@@ -130,7 +103,10 @@
 
 	if (soc_is_ar71xx() || soc_is_ar913x())
 		ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
-	else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x())
+	else if (soc_is_ar724x() ||
+		 soc_is_ar933x() ||
+		 soc_is_ar934x() ||
+		 soc_is_qca955x())
 		ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
 	else
 		BUG();
@@ -141,7 +117,7 @@
 					 handle_level_irq);
 	}
 
-	irq_set_chained_handler(ATH79_CPU_IRQ_MISC, ath79_misc_irq_handler);
+	irq_set_chained_handler(ATH79_CPU_IRQ(6), ath79_misc_irq_handler);
 }
 
 static void ar934x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
@@ -174,7 +150,89 @@
 		irq_set_chip_and_handler(i, &dummy_irq_chip,
 					 handle_level_irq);
 
-	irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch);
+	irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
+}
+
+static void qca955x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
+{
+	u32 status;
+
+	disable_irq_nosync(irq);
+
+	status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
+	status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL;
+
+	if (status == 0) {
+		spurious_interrupt();
+		goto enable;
+	}
+
+	if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) {
+		/* TODO: flush DDR? */
+		generic_handle_irq(ATH79_IP2_IRQ(0));
+	}
+
+	if (status & QCA955X_EXT_INT_WMAC_ALL) {
+		/* TODO: flush DDR? */
+		generic_handle_irq(ATH79_IP2_IRQ(1));
+	}
+
+enable:
+	enable_irq(irq);
+}
+
+static void qca955x_ip3_irq_dispatch(unsigned int irq, struct irq_desc *desc)
+{
+	u32 status;
+
+	disable_irq_nosync(irq);
+
+	status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
+	status &= QCA955X_EXT_INT_PCIE_RC2_ALL |
+		  QCA955X_EXT_INT_USB1 |
+		  QCA955X_EXT_INT_USB2;
+
+	if (status == 0) {
+		spurious_interrupt();
+		goto enable;
+	}
+
+	if (status & QCA955X_EXT_INT_USB1) {
+		/* TODO: flush DDR? */
+		generic_handle_irq(ATH79_IP3_IRQ(0));
+	}
+
+	if (status & QCA955X_EXT_INT_USB2) {
+		/* TODO: flush DDR? */
+		generic_handle_irq(ATH79_IP3_IRQ(1));
+	}
+
+	if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) {
+		/* TODO: flush DDR? */
+		generic_handle_irq(ATH79_IP3_IRQ(2));
+	}
+
+enable:
+	enable_irq(irq);
+}
+
+static void qca955x_irq_init(void)
+{
+	int i;
+
+	for (i = ATH79_IP2_IRQ_BASE;
+	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+		irq_set_chip_and_handler(i, &dummy_irq_chip,
+					 handle_level_irq);
+
+	irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch);
+
+	for (i = ATH79_IP3_IRQ_BASE;
+	     i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
+		irq_set_chip_and_handler(i, &dummy_irq_chip,
+					 handle_level_irq);
+
+	irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
 }
 
 asmlinkage void plat_irq_dispatch(void)
@@ -184,22 +242,22 @@
 	pending = read_c0_status() & read_c0_cause() & ST0_IM;
 
 	if (pending & STATUSF_IP7)
-		do_IRQ(ATH79_CPU_IRQ_TIMER);
+		do_IRQ(ATH79_CPU_IRQ(7));
 
 	else if (pending & STATUSF_IP2)
 		ath79_ip2_handler();
 
 	else if (pending & STATUSF_IP4)
-		do_IRQ(ATH79_CPU_IRQ_GE0);
+		do_IRQ(ATH79_CPU_IRQ(4));
 
 	else if (pending & STATUSF_IP5)
-		do_IRQ(ATH79_CPU_IRQ_GE1);
+		do_IRQ(ATH79_CPU_IRQ(5));
 
 	else if (pending & STATUSF_IP3)
 		ath79_ip3_handler();
 
 	else if (pending & STATUSF_IP6)
-		do_IRQ(ATH79_CPU_IRQ_MISC);
+		do_IRQ(ATH79_CPU_IRQ(6));
 
 	else
 		spurious_interrupt();
@@ -212,63 +270,69 @@
  * Issue a flush in the handlers to ensure that the driver sees
  * the update.
  */
+
+static void ath79_default_ip2_handler(void)
+{
+	do_IRQ(ATH79_CPU_IRQ(2));
+}
+
+static void ath79_default_ip3_handler(void)
+{
+	do_IRQ(ATH79_CPU_IRQ(3));
+}
+
 static void ar71xx_ip2_handler(void)
 {
 	ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI);
-	do_IRQ(ATH79_CPU_IRQ_IP2);
+	do_IRQ(ATH79_CPU_IRQ(2));
 }
 
 static void ar724x_ip2_handler(void)
 {
 	ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_PCIE);
-	do_IRQ(ATH79_CPU_IRQ_IP2);
+	do_IRQ(ATH79_CPU_IRQ(2));
 }
 
 static void ar913x_ip2_handler(void)
 {
 	ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_WMAC);
-	do_IRQ(ATH79_CPU_IRQ_IP2);
+	do_IRQ(ATH79_CPU_IRQ(2));
 }
 
 static void ar933x_ip2_handler(void)
 {
 	ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_WMAC);
-	do_IRQ(ATH79_CPU_IRQ_IP2);
-}
-
-static void ar934x_ip2_handler(void)
-{
-	do_IRQ(ATH79_CPU_IRQ_IP2);
+	do_IRQ(ATH79_CPU_IRQ(2));
 }
 
 static void ar71xx_ip3_handler(void)
 {
 	ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
-	do_IRQ(ATH79_CPU_IRQ_USB);
+	do_IRQ(ATH79_CPU_IRQ(3));
 }
 
 static void ar724x_ip3_handler(void)
 {
 	ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_USB);
-	do_IRQ(ATH79_CPU_IRQ_USB);
+	do_IRQ(ATH79_CPU_IRQ(3));
 }
 
 static void ar913x_ip3_handler(void)
 {
 	ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_USB);
-	do_IRQ(ATH79_CPU_IRQ_USB);
+	do_IRQ(ATH79_CPU_IRQ(3));
 }
 
 static void ar933x_ip3_handler(void)
 {
 	ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_USB);
-	do_IRQ(ATH79_CPU_IRQ_USB);
+	do_IRQ(ATH79_CPU_IRQ(3));
 }
 
 static void ar934x_ip3_handler(void)
 {
 	ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_USB);
-	do_IRQ(ATH79_CPU_IRQ_USB);
+	do_IRQ(ATH79_CPU_IRQ(3));
 }
 
 void __init arch_init_irq(void)
@@ -286,16 +350,21 @@
 		ath79_ip2_handler = ar933x_ip2_handler;
 		ath79_ip3_handler = ar933x_ip3_handler;
 	} else if (soc_is_ar934x()) {
-		ath79_ip2_handler = ar934x_ip2_handler;
+		ath79_ip2_handler = ath79_default_ip2_handler;
 		ath79_ip3_handler = ar934x_ip3_handler;
+	} else if (soc_is_qca955x()) {
+		ath79_ip2_handler = ath79_default_ip2_handler;
+		ath79_ip3_handler = ath79_default_ip3_handler;
 	} else {
 		BUG();
 	}
 
-	cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC;
+	cp0_perfcount_irq = ATH79_MISC_IRQ(5);
 	mips_cpu_irq_init();
 	ath79_misc_irq_init();
 
 	if (soc_is_ar934x())
 		ar934x_ip2_irq_init();
+	else if (soc_is_qca955x())
+		qca955x_irq_init();
 }
diff --git a/arch/mips/ath79/mach-ap121.c b/arch/mips/ath79/mach-ap121.c
index 4c20200..1bf73f2 100644
--- a/arch/mips/ath79/mach-ap121.c
+++ b/arch/mips/ath79/mach-ap121.c
@@ -69,7 +69,7 @@
 
 static struct ath79_spi_platform_data ap121_spi_data = {
 	.bus_num	= 0,
-	.num_chipselect	= 1,
+	.num_chipselect = 1,
 };
 
 static void __init ap121_setup(void)
diff --git a/arch/mips/ath79/mach-ap136.c b/arch/mips/ath79/mach-ap136.c
new file mode 100644
index 0000000..479dd4b
--- /dev/null
+++ b/arch/mips/ath79/mach-ap136.c
@@ -0,0 +1,156 @@
+/*
+ * Qualcomm Atheros AP136 reference board support
+ *
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+
+#include "machtypes.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "pci.h"
+
+#define AP136_GPIO_LED_STATUS_RED	14
+#define AP136_GPIO_LED_STATUS_GREEN	19
+#define AP136_GPIO_LED_USB		4
+#define AP136_GPIO_LED_WLAN_2G		13
+#define AP136_GPIO_LED_WLAN_5G		12
+#define AP136_GPIO_LED_WPS_RED		15
+#define AP136_GPIO_LED_WPS_GREEN	20
+
+#define AP136_GPIO_BTN_WPS		16
+#define AP136_GPIO_BTN_RFKILL		21
+
+#define AP136_KEYS_POLL_INTERVAL	20	/* msecs */
+#define AP136_KEYS_DEBOUNCE_INTERVAL	(3 * AP136_KEYS_POLL_INTERVAL)
+
+#define AP136_WMAC_CALDATA_OFFSET 0x1000
+#define AP136_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led ap136_leds_gpio[] __initdata = {
+	{
+		.name		= "qca:green:status",
+		.gpio		= AP136_GPIO_LED_STATUS_GREEN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "qca:red:status",
+		.gpio		= AP136_GPIO_LED_STATUS_RED,
+		.active_low	= 1,
+	},
+	{
+		.name		= "qca:green:wps",
+		.gpio		= AP136_GPIO_LED_WPS_GREEN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "qca:red:wps",
+		.gpio		= AP136_GPIO_LED_WPS_RED,
+		.active_low	= 1,
+	},
+	{
+		.name		= "qca:red:wlan-2g",
+		.gpio		= AP136_GPIO_LED_WLAN_2G,
+		.active_low	= 1,
+	},
+	{
+		.name		= "qca:red:usb",
+		.gpio		= AP136_GPIO_LED_USB,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button ap136_gpio_keys[] __initdata = {
+	{
+		.desc		= "WPS button",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= AP136_GPIO_BTN_WPS,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "RFKILL button",
+		.type		= EV_KEY,
+		.code		= KEY_RFKILL,
+		.debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= AP136_GPIO_BTN_RFKILL,
+		.active_low	= 1,
+	},
+};
+
+static struct spi_board_info ap136_spi_info[] = {
+	{
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 25000000,
+		.modalias	= "mx25l6405d",
+	}
+};
+
+static struct ath79_spi_platform_data ap136_spi_data = {
+	.bus_num	= 0,
+	.num_chipselect	= 1,
+};
+
+#ifdef CONFIG_PCI
+static struct ath9k_platform_data ap136_ath9k_data;
+
+static int ap136_pci_plat_dev_init(struct pci_dev *dev)
+{
+	if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
+		dev->dev.platform_data = &ap136_ath9k_data;
+
+	return 0;
+}
+
+static void __init ap136_pci_init(u8 *eeprom)
+{
+	memcpy(ap136_ath9k_data.eeprom_data, eeprom,
+	       sizeof(ap136_ath9k_data.eeprom_data));
+
+	ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
+	ath79_register_pci();
+}
+#else
+static inline void ap136_pci_init(void) {}
+#endif /* CONFIG_PCI */
+
+static void __init ap136_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
+				 ap136_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(ap136_gpio_keys),
+					ap136_gpio_keys);
+	ath79_register_spi(&ap136_spi_data, ap136_spi_info,
+			   ARRAY_SIZE(ap136_spi_info));
+	ath79_register_usb();
+	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
+	ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
+	     "Atheros AP136-010 reference board",
+	     ap136_setup);
diff --git a/arch/mips/ath79/mach-ap81.c b/arch/mips/ath79/mach-ap81.c
index abe1983..1c78d49 100644
--- a/arch/mips/ath79/mach-ap81.c
+++ b/arch/mips/ath79/mach-ap81.c
@@ -78,7 +78,7 @@
 
 static struct ath79_spi_platform_data ap81_spi_data = {
 	.bus_num	= 0,
-	.num_chipselect	= 1,
+	.num_chipselect = 1,
 };
 
 static void __init ap81_setup(void)
diff --git a/arch/mips/ath79/mach-db120.c b/arch/mips/ath79/mach-db120.c
index 42f540a..4d661a1 100644
--- a/arch/mips/ath79/mach-db120.c
+++ b/arch/mips/ath79/mach-db120.c
@@ -87,7 +87,7 @@
 
 static struct ath79_spi_platform_data db120_spi_data = {
 	.bus_num	= 0,
-	.num_chipselect	= 1,
+	.num_chipselect = 1,
 };
 
 #ifdef CONFIG_PCI
diff --git a/arch/mips/ath79/mach-pb44.c b/arch/mips/ath79/mach-pb44.c
index c5f0ea5..67b980d 100644
--- a/arch/mips/ath79/mach-pb44.c
+++ b/arch/mips/ath79/mach-pb44.c
@@ -34,8 +34,8 @@
 #define PB44_KEYS_DEBOUNCE_INTERVAL	(3 * PB44_KEYS_POLL_INTERVAL)
 
 static struct i2c_gpio_platform_data pb44_i2c_gpio_data = {
-	.sda_pin        = PB44_GPIO_I2C_SDA,
-	.scl_pin        = PB44_GPIO_I2C_SCL,
+	.sda_pin	= PB44_GPIO_I2C_SDA,
+	.scl_pin	= PB44_GPIO_I2C_SCL,
 };
 
 static struct platform_device pb44_i2c_gpio_device = {
@@ -53,7 +53,7 @@
 static struct i2c_board_info pb44_i2c_board_info[] __initdata = {
 	{
 		I2C_BOARD_INFO("pcf8575", 0x20),
-		.platform_data  = &pb44_pcf857x_data,
+		.platform_data	= &pb44_pcf857x_data,
 	},
 };
 
diff --git a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h
index af92e5c..2625405 100644
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -17,6 +17,7 @@
 enum ath79_mach_type {
 	ATH79_MACH_GENERIC = 0,
 	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
+	ATH79_MACH_AP136_010,		/* Atheros AP136-010 reference board */
 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
 	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
 	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
diff --git a/arch/mips/ath79/pci.c b/arch/mips/ath79/pci.c
index ca83abd..730c0b0 100644
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -14,10 +14,11 @@
 
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/resource.h>
+#include <linux/platform_device.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/irq.h>
-#include <asm/mach-ath79/pci.h>
 #include "pci.h"
 
 static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
@@ -48,6 +49,21 @@
 	}
 };
 
+static const struct ath79_pci_irq qca955x_pci_irq_map[] __initconst = {
+	{
+		.bus	= 0,
+		.slot	= 0,
+		.pin	= 1,
+		.irq	= ATH79_PCI_IRQ(0),
+	},
+	{
+		.bus	= 1,
+		.slot	= 0,
+		.pin	= 1,
+		.irq	= ATH79_PCI_IRQ(1),
+	},
+};
+
 int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
 {
 	int irq = -1;
@@ -63,6 +79,9 @@
 			   soc_is_ar9344()) {
 			ath79_pci_irq_map = ar724x_pci_irq_map;
 			ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
+		} else if (soc_is_qca955x()) {
+			ath79_pci_irq_map = qca955x_pci_irq_map;
+			ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
 		} else {
 			pr_crit("pci %s: invalid irq map\n",
 				pci_name((struct pci_dev *) dev));
@@ -74,7 +93,9 @@
 		const struct ath79_pci_irq *entry;
 
 		entry = &ath79_pci_irq_map[i];
-		if (entry->slot == slot && entry->pin == pin) {
+		if (entry->bus == dev->bus->number &&
+		    entry->slot == slot &&
+		    entry->pin == pin) {
 			irq = entry->irq;
 			break;
 		}
@@ -110,21 +131,143 @@
 	ath79_pci_plat_dev_init = func;
 }
 
+static struct platform_device *
+ath79_register_pci_ar71xx(void)
+{
+	struct platform_device *pdev;
+	struct resource res[4];
+
+	memset(res, 0, sizeof(res));
+
+	res[0].name = "cfg_base";
+	res[0].flags = IORESOURCE_MEM;
+	res[0].start = AR71XX_PCI_CFG_BASE;
+	res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1;
+
+	res[1].flags = IORESOURCE_IRQ;
+	res[1].start = ATH79_CPU_IRQ(2);
+	res[1].end = ATH79_CPU_IRQ(2);
+
+	res[2].name = "io_base";
+	res[2].flags = IORESOURCE_IO;
+	res[2].start = 0;
+	res[2].end = 0;
+
+	res[3].name = "mem_base";
+	res[3].flags = IORESOURCE_MEM;
+	res[3].start = AR71XX_PCI_MEM_BASE;
+	res[3].end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1;
+
+	pdev = platform_device_register_simple("ar71xx-pci", -1,
+					       res, ARRAY_SIZE(res));
+	return pdev;
+}
+
+static struct platform_device *
+ath79_register_pci_ar724x(int id,
+			  unsigned long cfg_base,
+			  unsigned long ctrl_base,
+			  unsigned long crp_base,
+			  unsigned long mem_base,
+			  unsigned long mem_size,
+			  unsigned long io_base,
+			  int irq)
+{
+	struct platform_device *pdev;
+	struct resource res[6];
+
+	memset(res, 0, sizeof(res));
+
+	res[0].name = "cfg_base";
+	res[0].flags = IORESOURCE_MEM;
+	res[0].start = cfg_base;
+	res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1;
+
+	res[1].name = "ctrl_base";
+	res[1].flags = IORESOURCE_MEM;
+	res[1].start = ctrl_base;
+	res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1;
+
+	res[2].flags = IORESOURCE_IRQ;
+	res[2].start = irq;
+	res[2].end = irq;
+
+	res[3].name = "mem_base";
+	res[3].flags = IORESOURCE_MEM;
+	res[3].start = mem_base;
+	res[3].end = mem_base + mem_size - 1;
+
+	res[4].name = "io_base";
+	res[4].flags = IORESOURCE_IO;
+	res[4].start = io_base;
+	res[4].end = io_base;
+
+	res[5].name = "crp_base";
+	res[5].flags = IORESOURCE_MEM;
+	res[5].start = crp_base;
+	res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1;
+
+	pdev = platform_device_register_simple("ar724x-pci", id,
+					       res, ARRAY_SIZE(res));
+	return pdev;
+}
+
 int __init ath79_register_pci(void)
 {
-	if (soc_is_ar71xx())
-		return ar71xx_pcibios_init();
+	struct platform_device *pdev = NULL;
 
-	if (soc_is_ar724x())
-		return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
-
-	if (soc_is_ar9342() || soc_is_ar9344()) {
+	if (soc_is_ar71xx()) {
+		pdev = ath79_register_pci_ar71xx();
+	} else if (soc_is_ar724x()) {
+		pdev = ath79_register_pci_ar724x(-1,
+						 AR724X_PCI_CFG_BASE,
+						 AR724X_PCI_CTRL_BASE,
+						 AR724X_PCI_CRP_BASE,
+						 AR724X_PCI_MEM_BASE,
+						 AR724X_PCI_MEM_SIZE,
+						 0,
+						 ATH79_CPU_IRQ(2));
+	} else if (soc_is_ar9342() ||
+		   soc_is_ar9344()) {
 		u32 bootstrap;
 
 		bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-		if (bootstrap & AR934X_BOOTSTRAP_PCIE_RC)
-			return ar724x_pcibios_init(ATH79_IP2_IRQ(0));
+		if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0)
+			return -ENODEV;
+
+		pdev = ath79_register_pci_ar724x(-1,
+						 AR724X_PCI_CFG_BASE,
+						 AR724X_PCI_CTRL_BASE,
+						 AR724X_PCI_CRP_BASE,
+						 AR724X_PCI_MEM_BASE,
+						 AR724X_PCI_MEM_SIZE,
+						 0,
+						 ATH79_IP2_IRQ(0));
+	} else if (soc_is_qca9558()) {
+		pdev = ath79_register_pci_ar724x(0,
+						 QCA955X_PCI_CFG_BASE0,
+						 QCA955X_PCI_CTRL_BASE0,
+						 QCA955X_PCI_CRP_BASE0,
+						 QCA955X_PCI_MEM_BASE0,
+						 QCA955X_PCI_MEM_SIZE,
+						 0,
+						 ATH79_IP2_IRQ(0));
+
+		pdev = ath79_register_pci_ar724x(1,
+						 QCA955X_PCI_CFG_BASE1,
+						 QCA955X_PCI_CTRL_BASE1,
+						 QCA955X_PCI_CRP_BASE1,
+						 QCA955X_PCI_MEM_BASE1,
+						 QCA955X_PCI_MEM_SIZE,
+						 1,
+						 ATH79_IP3_IRQ(2));
+	} else {
+		/* No PCI support */
+		return -ENODEV;
 	}
 
-	return -ENODEV;
+	if (!pdev)
+		pr_err("unable to register PCI controller device\n");
+
+	return pdev ? 0 : -ENODEV;
 }
diff --git a/arch/mips/ath79/pci.h b/arch/mips/ath79/pci.h
index 51c6625d..1d00a38 100644
--- a/arch/mips/ath79/pci.h
+++ b/arch/mips/ath79/pci.h
@@ -14,6 +14,7 @@
 #define _ATH79_PCI_H
 
 struct ath79_pci_irq {
+	int	bus;
 	u8	slot;
 	u8	pin;
 	int	irq;
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 60d212e..d5b3c90 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -164,13 +164,29 @@
 		rev = id & AR934X_REV_ID_REVISION_MASK;
 		break;
 
+	case REV_ID_MAJOR_QCA9556:
+		ath79_soc = ATH79_SOC_QCA9556;
+		chip = "9556";
+		rev = id & QCA955X_REV_ID_REVISION_MASK;
+		break;
+
+	case REV_ID_MAJOR_QCA9558:
+		ath79_soc = ATH79_SOC_QCA9558;
+		chip = "9558";
+		rev = id & QCA955X_REV_ID_REVISION_MASK;
+		break;
+
 	default:
 		panic("ath79: unknown SoC, id:0x%08x", id);
 	}
 
 	ath79_soc_rev = rev;
 
-	sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
+	if (soc_is_qca955x())
+		sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
+			chip, rev);
+	else
+		sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
 	pr_info("SoC: %s\n", ath79_sys_type);
 }
 
diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index 1a3567f..f3bf6d5 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,5 +3,5 @@
 # under Linux.
 #
 
-obj-y 				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+obj-y				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
 obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index 48a4c70..cc40b74 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -3,10 +3,10 @@
  *
  * Copyright (C) 2005 Broadcom Corporation
  * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -18,83 +18,160 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <asm/addrspace.h>
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
 #include <asm/mach-bcm47xx/bcm47xx.h>
 
 static char nvram_buf[NVRAM_SPACE];
 
-/* Probe for NVRAM header */
-static void early_nvram_init(void)
+static u32 find_nvram_size(u32 end)
 {
-#ifdef CONFIG_BCM47XX_SSB
-	struct ssb_mipscore *mcore_ssb;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
-	struct bcma_drv_cc *bcma_cc;
-#endif
 	struct nvram_header *header;
+	u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
 	int i;
-	u32 base = 0;
-	u32 lim = 0;
-	u32 off;
-	u32 *src, *dst;
 
-	switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
-	case BCM47XX_BUS_TYPE_SSB:
-		mcore_ssb = &bcm47xx_bus.ssb.mipscore;
-		base = mcore_ssb->pflash.window;
-		lim = mcore_ssb->pflash.window_size;
-		break;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
-	case BCM47XX_BUS_TYPE_BCMA:
-		bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
-		base = bcma_cc->pflash.window;
-		lim = bcma_cc->pflash.window_size;
-		break;
-#endif
+	for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
+		header = (struct nvram_header *)KSEG1ADDR(end - nvram_sizes[i]);
+		if (header->magic == NVRAM_HEADER)
+			return nvram_sizes[i];
 	}
 
+	return 0;
+}
+
+/* Probe for NVRAM header */
+static int nvram_find_and_copy(u32 base, u32 lim)
+{
+	struct nvram_header *header;
+	int i;
+	u32 off;
+	u32 *src, *dst;
+	u32 size;
+
+	/* TODO: when nvram is on nand flash check for bad blocks first. */
 	off = FLASH_MIN;
 	while (off <= lim) {
 		/* Windowed flash access */
-		header = (struct nvram_header *)
-			KSEG1ADDR(base + off - NVRAM_SPACE);
-		if (header->magic == NVRAM_HEADER)
+		size = find_nvram_size(base + off);
+		if (size) {
+			header = (struct nvram_header *)KSEG1ADDR(base + off -
+								  size);
 			goto found;
+		}
 		off <<= 1;
 	}
 
 	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
 	header = (struct nvram_header *) KSEG1ADDR(base + 4096);
-	if (header->magic == NVRAM_HEADER)
+	if (header->magic == NVRAM_HEADER) {
+		size = NVRAM_SPACE;
 		goto found;
+	}
 
 	header = (struct nvram_header *) KSEG1ADDR(base + 1024);
-	if (header->magic == NVRAM_HEADER)
+	if (header->magic == NVRAM_HEADER) {
+		size = NVRAM_SPACE;
 		goto found;
+	}
 
-	return;
+	pr_err("no nvram found\n");
+	return -ENXIO;
 
 found:
+
+	if (header->len > size)
+		pr_err("The nvram size accoridng to the header seems to be bigger than the partition on flash\n");
+	if (header->len > NVRAM_SPACE)
+		pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+		       header->len, NVRAM_SPACE);
+
 	src = (u32 *) header;
 	dst = (u32 *) nvram_buf;
 	for (i = 0; i < sizeof(struct nvram_header); i += 4)
 		*dst++ = *src++;
-	for (; i < header->len && i < NVRAM_SPACE; i += 4)
+	for (; i < header->len && i < NVRAM_SPACE && i < size; i += 4)
 		*dst++ = le32_to_cpu(*src++);
+	memset(dst, 0x0, NVRAM_SPACE - i);
+
+	return 0;
 }
 
-int nvram_getenv(char *name, char *val, size_t val_len)
+#ifdef CONFIG_BCM47XX_SSB
+static int nvram_init_ssb(void)
+{
+	struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
+	u32 base;
+	u32 lim;
+
+	if (mcore->pflash.present) {
+		base = mcore->pflash.window;
+		lim = mcore->pflash.window_size;
+	} else {
+		pr_err("Couldn't find supported flash memory\n");
+		return -ENXIO;
+	}
+
+	return nvram_find_and_copy(base, lim);
+}
+#endif
+
+#ifdef CONFIG_BCM47XX_BCMA
+static int nvram_init_bcma(void)
+{
+	struct bcma_drv_cc *cc = &bcm47xx_bus.bcma.bus.drv_cc;
+	u32 base;
+	u32 lim;
+
+#ifdef CONFIG_BCMA_NFLASH
+	if (cc->nflash.boot) {
+		base = BCMA_SOC_FLASH1;
+		lim = BCMA_SOC_FLASH1_SZ;
+	} else
+#endif
+	if (cc->pflash.present) {
+		base = cc->pflash.window;
+		lim = cc->pflash.window_size;
+#ifdef CONFIG_BCMA_SFLASH
+	} else if (cc->sflash.present) {
+		base = cc->sflash.window;
+		lim = cc->sflash.size;
+#endif
+	} else {
+		pr_err("Couldn't find supported flash memory\n");
+		return -ENXIO;
+	}
+
+	return nvram_find_and_copy(base, lim);
+}
+#endif
+
+static int nvram_init(void)
+{
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		return nvram_init_ssb();
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		return nvram_init_bcma();
+#endif
+	}
+	return -ENXIO;
+}
+
+int bcm47xx_nvram_getenv(char *name, char *val, size_t val_len)
 {
 	char *var, *value, *end, *eq;
+	int err;
 
 	if (!name)
-		return NVRAM_ERR_INV_PARAM;
+		return -EINVAL;
 
-	if (!nvram_buf[0])
-		early_nvram_init();
+	if (!nvram_buf[0]) {
+		err = nvram_init();
+		if (err)
+			return err;
+	}
 
 	/* Look for name=value and return value */
 	var = &nvram_buf[sizeof(struct nvram_header)];
@@ -110,6 +187,6 @@
 			return snprintf(val, val_len, "%s", value);
 		}
 	}
-	return NVRAM_ERR_ENVNOTFOUND;
+	return -ENOENT;
 }
-EXPORT_SYMBOL(nvram_getenv);
+EXPORT_SYMBOL(bcm47xx_nvram_getenv);
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 4d54b58..b2246cd 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -35,7 +35,7 @@
 #include <asm/reboot.h>
 #include <asm/time.h>
 #include <bcm47xx.h>
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
 
 union bcm47xx_bus bcm47xx_bus;
 EXPORT_SYMBOL(bcm47xx_bus);
@@ -115,7 +115,7 @@
 	memset(&iv->sprom, 0, sizeof(struct ssb_sprom));
 	bcm47xx_fill_sprom(&iv->sprom, NULL, false);
 
-	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+	if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
 		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
 
 	return 0;
@@ -138,7 +138,7 @@
 		panic("Failed to initialize SSB bus (err %d)", err);
 
 	mcore = &bcm47xx_bus.ssb.mipscore;
-	if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+	if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
 		if (strstr(buf, "console=ttyS1")) {
 			struct ssb_serial_port port;
 
diff --git a/arch/mips/bcm47xx/sprom.c b/arch/mips/bcm47xx/sprom.c
index 289cc0a..ad03c93 100644
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -27,7 +27,7 @@
  */
 
 #include <bcm47xx.h>
-#include <nvram.h>
+#include <bcm47xx_nvram.h>
 
 static void create_key(const char *prefix, const char *postfix,
 		       const char *name, char *buf, int len)
@@ -50,18 +50,18 @@
 
 	create_key(prefix, postfix, name, key, sizeof(key));
 
-	err = nvram_getenv(key, buf, len);
-	if (fallback && err == NVRAM_ERR_ENVNOTFOUND && prefix) {
+	err = bcm47xx_nvram_getenv(key, buf, len);
+	if (fallback && err == -ENOENT && prefix) {
 		create_key(NULL, postfix, name, key, sizeof(key));
-		err = nvram_getenv(key, buf, len);
+		err = bcm47xx_nvram_getenv(key, buf, len);
 	}
 	return err;
 }
 
 #define NVRAM_READ_VAL(type)						\
 static void nvram_read_ ## type (const char *prefix,			\
-				 const char *postfix, const char *name,	\
-				 type *val, type allset, bool fallback)	\
+				 const char *postfix, const char *name, \
+				 type *val, type allset, bool fallback) \
 {									\
 	char buf[100];							\
 	int err;							\
@@ -71,7 +71,7 @@
 			    fallback);					\
 	if (err < 0)							\
 		return;							\
-	err = kstrto ## type (buf, 0, &var);				\
+	err = kstrto ## type(strim(buf), 0, &var);			\
 	if (err) {							\
 		pr_warn("can not parse nvram name %s%s%s with value %s got %i\n",	\
 			prefix, name, postfix, buf, err);		\
@@ -99,7 +99,7 @@
 	err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
 	if (err < 0)
 		return;
-	err = kstrtou32(buf, 0, &val);
+	err = kstrtou32(strim(buf), 0, &val);
 	if (err) {
 		pr_warn("can not parse nvram name %s%s with value %s got %i\n",
 			prefix, name, buf, err);
@@ -120,7 +120,7 @@
 	err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
 	if (err < 0)
 		return;
-	err = kstrtou32(buf, 0, &val);
+	err = kstrtou32(strim(buf), 0, &val);
 	if (err) {
 		pr_warn("can not parse nvram name %s%s with value %s got %i\n",
 			prefix, name, buf, err);
@@ -144,7 +144,7 @@
 	if (err < 0)
 		return;
 
-	nvram_parse_macaddr(buf, *val);
+	bcm47xx_nvram_parse_macaddr(buf, *val);
 }
 
 static void nvram_read_alpha2(const char *prefix, const char *name,
@@ -652,12 +652,10 @@
 static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,
 				    bool fallback)
 {
-	nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0,
-		       fallback);
+	nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0, true);
 	nvram_read_u16(prefix, NULL, "boardnum", &sprom->board_num, 0,
 		       fallback);
-	nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0,
-		       fallback);
+	nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0, true);
 	nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo,
 			 &sprom->boardflags_hi, fallback);
 	nvram_read_u32_2(prefix, "boardflags2", &sprom->boardflags2_lo,
diff --git a/arch/mips/bcm47xx/wgt634u.c b/arch/mips/bcm47xx/wgt634u.c
index 9d111e8..c63a4c2 100644
--- a/arch/mips/bcm47xx/wgt634u.c
+++ b/arch/mips/bcm47xx/wgt634u.c
@@ -36,13 +36,13 @@
 };
 
 static struct gpio_led_platform_data wgt634u_led_data = {
-	.num_leds =     ARRAY_SIZE(wgt634u_leds),
-	.leds =         wgt634u_leds,
+	.num_leds =	ARRAY_SIZE(wgt634u_leds),
+	.leds =		wgt634u_leds,
 };
 
 static struct platform_device wgt634u_gpio_leds = {
-	.name =         "leds-gpio",
-	.id =           -1,
+	.name =		"leds-gpio",
+	.id =		-1,
 	.dev = {
 		.platform_data = &wgt634u_led_data,
 	}
@@ -53,35 +53,35 @@
    firmware. */
 static struct mtd_partition wgt634u_partitions[] = {
 	{
-		.name       = "cfe",
-		.offset     = 0,
-		.size       = 0x60000,		/* 384k */
-		.mask_flags = MTD_WRITEABLE 	/* force read-only */
+		.name	    = "cfe",
+		.offset	    = 0,
+		.size	    = 0x60000,		/* 384k */
+		.mask_flags = MTD_WRITEABLE	/* force read-only */
 	},
 	{
-		.name   = "config",
+		.name	= "config",
 		.offset = 0x60000,
-		.size   = 0x20000		/* 128k */
+		.size	= 0x20000		/* 128k */
 	},
 	{
-		.name   = "linux",
+		.name	= "linux",
 		.offset = 0x80000,
-		.size   = 0x140000 		/* 1280k */
+		.size	= 0x140000		/* 1280k */
 	},
 	{
-		.name   = "jffs",
+		.name	= "jffs",
 		.offset = 0x1c0000,
-		.size   = 0x620000 		/* 6272k */
+		.size	= 0x620000		/* 6272k */
 	},
 	{
-		.name   = "nvram",
+		.name	= "nvram",
 		.offset = 0x7e0000,
-		.size   = 0x20000		/* 128k */
+		.size	= 0x20000		/* 128k */
 	},
 };
 
 static struct physmap_flash_data wgt634u_flash_data = {
-	.parts    = wgt634u_partitions,
+	.parts	  = wgt634u_partitions,
 	.nr_parts = ARRAY_SIZE(wgt634u_partitions)
 };
 
@@ -90,9 +90,9 @@
 };
 
 static struct platform_device wgt634u_flash = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev           = { .platform_data = &wgt634u_flash_data, },
+	.name	       = "physmap-flash",
+	.id	       = 0,
+	.dev	       = { .platform_data = &wgt634u_flash_data, },
 	.resource      = &wgt634u_flash_resource,
 	.num_resources = 1,
 };
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 73be9b3..ed1949c 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -406,9 +406,9 @@
 	.expected_cpu_id		= 0x6348,
 
 	.has_uart0			= 1,
-        .has_enet0			= 1,
-        .has_enet1			= 1,
-        .has_pci			= 1,
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
 
 	.enet0 = {
 		.has_phy		= 1,
@@ -591,22 +591,22 @@
 };
 
 static struct board_info __initdata board_AGPFS0 = {
-	.name                           = "AGPF-S0",
-	.expected_cpu_id                = 0x6358,
+	.name				= "AGPF-S0",
+	.expected_cpu_id		= 0x6358,
 
 	.has_uart0			= 1,
-	.has_enet0                      = 1,
-	.has_enet1                      = 1,
-	.has_pci                        = 1,
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
 
 	.enet0 = {
-		.has_phy                = 1,
-		.use_internal_phy       = 1,
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
 	},
 
 	.enet1 = {
-		.force_speed_100        = 1,
-		.force_duplex_full      = 1,
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
 	},
 
 	.has_ohci0 = 1,
@@ -677,7 +677,7 @@
 	.revision		= 0x02,
 	.board_rev		= 0x17,
 	.country_code		= 0x0,
-	.ant_available_bg 	= 0x3,
+	.ant_available_bg	= 0x3,
 	.pa0b0			= 0x15ae,
 	.pa0b1			= 0xfa85,
 	.pa0b2			= 0xfe8d,
diff --git a/arch/mips/bcm63xx/early_printk.c b/arch/mips/bcm63xx/early_printk.c
index bf353c9..aa8f7f9 100644
--- a/arch/mips/bcm63xx/early_printk.c
+++ b/arch/mips/bcm63xx/early_printk.c
@@ -10,7 +10,7 @@
 #include <bcm63xx_io.h>
 #include <bcm63xx_regs.h>
 
-static void __init wait_xfered(void)
+static void wait_xfered(void)
 {
 	unsigned int val;
 
@@ -22,7 +22,7 @@
 	} while (1);
 }
 
-void __init prom_putchar(char c)
+void prom_putchar(char c)
 {
 	wait_xfered();
 	bcm_uart0_writel(c, UART_FIFO_REG);
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index 85bcb5a..851261e 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -24,7 +24,7 @@
 hostprogs-y := elf2ecoff
 
 targets := vmlinux.ecoff
-quiet_cmd_ecoff = ECOFF   $@
+quiet_cmd_ecoff = ECOFF	  $@
       cmd_ecoff = $(obj)/elf2ecoff $(VMLINUX) $@ $(e2eflag)
 $(obj)/vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX) FORCE
 	$(call if_changed,ecoff)
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index c2a3fb0..bbaa1d4 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -51,7 +51,7 @@
 
 targets += piggy.o
 OBJCOPYFLAGS_piggy.o := --add-section=.image=$(obj)/vmlinux.bin.z \
-                        --set-section-flags=.image=contents,alloc,load,readonly,data
+			--set-section-flags=.image=contents,alloc,load,readonly,data
 $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
 	$(call if_changed,objcopy)
 
@@ -67,9 +67,9 @@
 
 vmlinuzobjs-y += $(obj)/piggy.o
 
-quiet_cmd_zld = LD      $@
+quiet_cmd_zld = LD	$@
       cmd_zld = $(LD) $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T $< $(vmlinuzobjs-y) -o $@
-quiet_cmd_strip = STRIP   $@
+quiet_cmd_strip = STRIP	  $@
       cmd_strip = $(STRIP) -s $@
 vmlinuz: $(src)/ld.script $(vmlinuzobjs-y) $(obj)/calc_vmlinuz_load_addr
 	$(call cmd,zld)
@@ -96,7 +96,7 @@
 vmlinuz.32: vmlinuz
 	$(call cmd,32)
 
-quiet_cmd_ecoff = ECOFF   $@
+quiet_cmd_ecoff = ECOFF	  $@
       cmd_ecoff = $< $(VMLINUZ) $@ $(e2eflag)
 vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ)
 	$(call cmd,ecoff)
diff --git a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
index 9a62436..37fe58c 100644
--- a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
+++ b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
@@ -1,8 +1,8 @@
 /*
  * Copyright (C) 2010 "Wu Zhangjin" <wuzhangjin@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index 5cad0fa..2c95730 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -5,8 +5,8 @@
  * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/boot/compressed/head.S b/arch/mips/boot/compressed/head.S
index 4e65a84..409cb48 100644
--- a/arch/mips/boot/compressed/head.S
+++ b/arch/mips/boot/compressed/head.S
@@ -32,8 +32,8 @@
 	bne	a2, a0, 1b
 	 addiu	a0, a0, 4
 
-	PTR_LA	a0, (.heap)          /* heap address */
-	PTR_LA  sp, (.stack + 8192)  /* stack address */
+	PTR_LA	a0, (.heap)	     /* heap address */
+	PTR_LA	sp, (.stack + 8192)  /* stack address */
 
 	PTR_LA	ra, 2f
 	PTR_LA	k0, decompress_kernel
diff --git a/arch/mips/boot/ecoff.h b/arch/mips/boot/ecoff.h
index 8c3eed2..83e5c38 100644
--- a/arch/mips/boot/ecoff.h
+++ b/arch/mips/boot/ecoff.h
@@ -2,48 +2,48 @@
  * Some ECOFF definitions.
  */
 typedef struct filehdr {
-        unsigned short  f_magic;        /* magic number */
-        unsigned short  f_nscns;        /* number of sections */
-        long            f_timdat;       /* time & date stamp */
-        long            f_symptr;       /* file pointer to symbolic header */
-        long            f_nsyms;        /* sizeof(symbolic hdr) */
-        unsigned short  f_opthdr;       /* sizeof(optional hdr) */
-        unsigned short  f_flags;        /* flags */
+	unsigned short	f_magic;	/* magic number */
+	unsigned short	f_nscns;	/* number of sections */
+	long		f_timdat;	/* time & date stamp */
+	long		f_symptr;	/* file pointer to symbolic header */
+	long		f_nsyms;	/* sizeof(symbolic hdr) */
+	unsigned short	f_opthdr;	/* sizeof(optional hdr) */
+	unsigned short	f_flags;	/* flags */
 } FILHDR;
-#define FILHSZ  sizeof(FILHDR)
+#define FILHSZ	sizeof(FILHDR)
 
 #define OMAGIC		0407
 #define MIPSEBMAGIC	0x160
 #define MIPSELMAGIC	0x162
 
 typedef struct scnhdr {
-        char            s_name[8];      /* section name */
-        long            s_paddr;        /* physical address, aliased s_nlib */
-        long            s_vaddr;        /* virtual address */
-        long            s_size;         /* section size */
-        long            s_scnptr;       /* file ptr to raw data for section */
-        long            s_relptr;       /* file ptr to relocation */
-        long            s_lnnoptr;      /* file ptr to gp histogram */
-        unsigned short  s_nreloc;       /* number of relocation entries */
-        unsigned short  s_nlnno;        /* number of gp histogram entries */
-        long            s_flags;        /* flags */
+	char		s_name[8];	/* section name */
+	long		s_paddr;	/* physical address, aliased s_nlib */
+	long		s_vaddr;	/* virtual address */
+	long		s_size;		/* section size */
+	long		s_scnptr;	/* file ptr to raw data for section */
+	long		s_relptr;	/* file ptr to relocation */
+	long		s_lnnoptr;	/* file ptr to gp histogram */
+	unsigned short	s_nreloc;	/* number of relocation entries */
+	unsigned short	s_nlnno;	/* number of gp histogram entries */
+	long		s_flags;	/* flags */
 } SCNHDR;
 #define SCNHSZ		sizeof(SCNHDR)
 #define SCNROUND	((long)16)
 
 typedef struct aouthdr {
-        short   magic;          /* see above                            */
-        short   vstamp;         /* version stamp                        */
-        long    tsize;          /* text size in bytes, padded to DW bdry*/
-        long    dsize;          /* initialized data "  "                */
-        long    bsize;          /* uninitialized data "   "             */
-        long    entry;          /* entry pt.                            */
-        long    text_start;     /* base of text used for this file      */
-        long    data_start;     /* base of data used for this file      */
-        long    bss_start;      /* base of bss used for this file       */
-        long    gprmask;        /* general purpose register mask        */
-        long    cprmask[4];     /* co-processor register masks          */
-        long    gp_value;       /* the gp value used for this object    */
+	short	magic;		/* see above				*/
+	short	vstamp;		/* version stamp			*/
+	long	tsize;		/* text size in bytes, padded to DW bdry*/
+	long	dsize;		/* initialized data "  "		*/
+	long	bsize;		/* uninitialized data "	  "		*/
+	long	entry;		/* entry pt.				*/
+	long	text_start;	/* base of text used for this file	*/
+	long	data_start;	/* base of data used for this file	*/
+	long	bss_start;	/* base of bss used for this file	*/
+	long	gprmask;	/* general purpose register mask	*/
+	long	cprmask[4];	/* co-processor register masks		*/
+	long	gp_value;	/* the gp value used for this object	*/
 } AOUTHDR;
 #define AOUTHSZ sizeof(AOUTHDR)
 
@@ -51,7 +51,7 @@
 #define NMAGIC		0410
 #define ZMAGIC		0413
 #define SMAGIC		0411
-#define LIBMAGIC        0443
+#define LIBMAGIC	0443
 
 #define N_TXTOFF(f, a) \
  ((a).magic == ZMAGIC || (a).magic == LIBMAGIC ? 0 : \
diff --git a/arch/mips/boot/elf2ecoff.c b/arch/mips/boot/elf2ecoff.c
index e19d906..8585078 100644
--- a/arch/mips/boot/elf2ecoff.c
+++ b/arch/mips/boot/elf2ecoff.c
@@ -29,7 +29,7 @@
 /* elf2ecoff.c
 
    This program converts an elf executable to an ECOFF executable.
-   No symbol table is retained.   This is useful primarily in building
+   No symbol table is retained.	  This is useful primarily in building
    net-bootable kernels for machines (e.g., DECstation and Alpha) which
    only support the ECOFF object file format. */
 
@@ -341,7 +341,7 @@
 
 	/* Figure out if we can cram the program header into an ECOFF
 	   header...  Basically, we can't handle anything but loadable
-	   segments, but we can ignore some kinds of segments.  We can't
+	   segments, but we can ignore some kinds of segments.	We can't
 	   handle holes in the address space.  Segments may be out of order,
 	   so we sort them first. */
 
@@ -514,7 +514,7 @@
 
 		for (i = 0; i < nosecs; i++) {
 			printf
-			    ("Section %d: %s phys %lx  size %lx  file offset %lx\n",
+			    ("Section %d: %s phys %lx  size %lx	 file offset %lx\n",
 			     i, esecs[i].s_name, esecs[i].s_paddr,
 			     esecs[i].s_size, esecs[i].s_scnptr);
 		}
@@ -551,7 +551,7 @@
 	}
 
 	/*
-	 * Copy the loadable sections.   Zero-fill any gaps less than 64k;
+	 * Copy the loadable sections.	 Zero-fill any gaps less than 64k;
 	 * complain about any zero-filling, and die if we're asked to zero-fill
 	 * more than 64k.
 	 */
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index 2f4f6d5..75a6df7 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -94,4 +94,13 @@
 	select NEED_SG_DMA_LENGTH
 
 
+config OCTEON_ILM
+	tristate "Module to measure interrupt latency using Octeon CIU Timer"
+	help
+	  This driver is a module to measure interrupt latency using the
+	  the CIU Timers on Octeon.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called octeon-ilm
+
 endif # CPU_CAVIUM_OCTEON
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 6e927cf..3595aff 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -17,7 +17,8 @@
 obj-y += octeon-memcpy.o
 obj-y += executive/
 
-obj-$(CONFIG_SMP)                     += smp.o
+obj-$(CONFIG_SMP)		      += smp.o
+obj-$(CONFIG_OCTEON_ILM)	      += oct_ilm.o
 
 DTS_FILES = octeon_3xxx.dts octeon_68xx.dts
 DTB_FILES = $(patsubst %.dts, %.dtb, $(DTS_FILES))
diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
index 6d5ddbc..504ed61 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
@@ -155,8 +155,8 @@
 	 *
 	 * Linux 64 bit: Set XKPHYS bit
 	 * Linux 32 bit: use mmap to create mapping, use virtual address
-	 * CVMX 64 bit:  use physical address directly
-	 * CVMX 32 bit:  use physical address directly
+	 * CVMX 64 bit:	 use physical address directly
+	 * CVMX 32 bit:	 use physical address directly
 	 *
 	 * Note that the CVMX environment assumes the use of 1-1 TLB
 	 * mappings so that the physical addresses can be used
@@ -398,7 +398,7 @@
 int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags)
 {
 	uint64_t cur_addr;
-	uint64_t prev_addr = 0;	/* zero is invalid */
+	uint64_t prev_addr = 0; /* zero is invalid */
 	int retval = 0;
 
 #ifdef DEBUG
@@ -424,7 +424,7 @@
 	if (cur_addr == 0 || phy_addr < cur_addr) {
 		/* add at front of list - special case with changing head ptr */
 		if (cur_addr && phy_addr + size > cur_addr)
-			goto bootmem_free_done;	/* error, overlapping section */
+			goto bootmem_free_done; /* error, overlapping section */
 		else if (phy_addr + size == cur_addr) {
 			/* Add to front of existing first block */
 			cvmx_bootmem_phy_set_next(phy_addr,
@@ -611,7 +611,7 @@
 	}
 
 	cvmx_bootmem_unlock();
-	return named_block_ptr != NULL;	/* 0 on failure, 1 on success */
+	return named_block_ptr != NULL; /* 0 on failure, 1 on success */
 }
 
 int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr,
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
index fd20153..7c649778 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -203,10 +203,10 @@
  * enumeration from the bootloader.
  *
  * @ipd_port: IPD input port associated with the port we want to get link
- *                 status for.
+ *		   status for.
  *
  * Returns The ports link status. If the link isn't fully resolved, this must
- *         return zero.
+ *	   return zero.
  */
 cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
 {
@@ -357,16 +357,16 @@
 				result.s.link_up = 1;
 				result.s.full_duplex = ((phy_status >> 13) & 1);
 				switch ((phy_status >> 14) & 3) {
-				case 0:	/* 10 Mbps */
+				case 0: /* 10 Mbps */
 					result.s.speed = 10;
 					break;
-				case 1:	/* 100 Mbps */
+				case 1: /* 100 Mbps */
 					result.s.speed = 100;
 					break;
-				case 2:	/* 1 Gbps */
+				case 2: /* 1 Gbps */
 					result.s.speed = 1000;
 					break;
-				case 3:	/* Illegal */
+				case 3: /* Illegal */
 					result.u64 = 0;
 					break;
 				}
@@ -391,16 +391,16 @@
 		result.s.link_up = inband_status.s.status;
 		result.s.full_duplex = inband_status.s.duplex;
 		switch (inband_status.s.speed) {
-		case 0:	/* 10 Mbps */
+		case 0: /* 10 Mbps */
 			result.s.speed = 10;
 			break;
-		case 1:	/* 100 Mbps */
+		case 1: /* 100 Mbps */
 			result.s.speed = 100;
 			break;
-		case 2:	/* 1 Gbps */
+		case 2: /* 1 Gbps */
 			result.s.speed = 1000;
 			break;
-		case 3:	/* Illegal */
+		case 3: /* Illegal */
 			result.u64 = 0;
 			break;
 		}
@@ -429,9 +429,9 @@
  *
  * @phy_addr:  The address of the PHY to program
  * @enable_autoneg:
- *                  Non zero if you want to enable auto-negotiation.
+ *		    Non zero if you want to enable auto-negotiation.
  * @link_info: Link speed to program. If the speed is zero and auto-negotiation
- *                  is enabled, all possible negotiation speeds are advertised.
+ *		    is enabled, all possible negotiation speeds are advertised.
  *
  * Returns Zero on success, negative on failure
  */
@@ -607,10 +607,10 @@
  *
  * @interface: Interface to probe
  * @supported_ports:
- *                  Number of ports Octeon supports.
+ *		    Number of ports Octeon supports.
  *
  * Returns Number of ports the actual board supports. Many times this will
- *         simple be "support_ports".
+ *	   simple be "support_ports".
  */
 int __cvmx_helper_board_interface_probe(int interface, int supported_ports)
 {
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
index c1c5489..607b4e6 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
@@ -79,10 +79,10 @@
  * @qlm:    QLM to shift value into
  * @bits:   Number of bits to shift in (1-32).
  * @data:   Data to shift in. Bit 0 enters the chain first, followed by
- *               bit 1, etc.
+ *		 bit 1, etc.
  *
  * Returns The low order bits of the JTAG chain that shifted out of the
- *         circle.
+ *	   circle.
  */
 uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data)
 {
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
index 82b2184..f59c88e 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
@@ -131,7 +131,7 @@
  * @interface: Interface to setup
  * @port:      Port to setup (0..3)
  * @cpu_clock_hz:
- *                  Chip frequency in Hertz
+ *		    Chip frequency in Hertz
  *
  * Returns Zero on success, negative on failure
  */
@@ -409,14 +409,14 @@
 			mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
 
 	/*
-	 * Port  .en  .type  .p0mii  Configuration
-	 * ----  ---  -----  ------  -----------------------------------------
-	 *  X      0     X      X    All links are disabled.
-	 *  0      1     X      0    Port 0 is RGMII
-	 *  0      1     X      1    Port 0 is MII
-	 *  1      1     0      X    Ports 1 and 2 are configured as RGMII ports.
-	 *  1      1     1      X    Port 1: GMII/MII; Port 2: disabled. GMII or
-	 *                           MII port is selected by GMX_PRT1_CFG[SPEED].
+	 * Port	 .en  .type  .p0mii  Configuration
+	 * ----	 ---  -----  ------  -----------------------------------------
+	 *  X	   0	 X	X    All links are disabled.
+	 *  0	   1	 X	0    Port 0 is RGMII
+	 *  0	   1	 X	1    Port 0 is MII
+	 *  1	   1	 0	X    Ports 1 and 2 are configured as RGMII ports.
+	 *  1	   1	 1	X    Port 1: GMII/MII; Port 2: disabled. GMII or
+	 *			     MII port is selected by GMX_PRT1_CFG[SPEED].
 	 */
 
 			/* In MII mode, CLK_CNT = 1. */
@@ -464,9 +464,9 @@
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
index 0c0bf5d..45f18cc 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
@@ -523,9 +523,9 @@
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
index 2830e4b..1f3030c 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
@@ -160,16 +160,16 @@
 		result.s.link_up = inband.s.status;
 		result.s.full_duplex = inband.s.duplex;
 		switch (inband.s.speed) {
-		case 0:	/* 10 Mbps */
+		case 0: /* 10 Mbps */
 			result.s.speed = 10;
 			break;
-		case 1:	/* 100 Mbps */
+		case 1: /* 100 Mbps */
 			result.s.speed = 100;
 			break;
-		case 2:	/* 1 Gbps */
+		case 2: /* 1 Gbps */
 			result.s.speed = 1000;
 			break;
-		case 3:	/* Illegal */
+		case 3: /* Illegal */
 			result.s.speed = 0;
 			result.s.link_up = 0;
 			break;
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
index dfdfe8b..65d2bc9 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
@@ -96,9 +96,9 @@
 	uint8_t *end_of_data;
 
 	cvmx_dprintf("Packet Length:   %u\n", work->len);
-	cvmx_dprintf("    Input Port:  %u\n", work->ipprt);
-	cvmx_dprintf("    QoS:         %u\n", work->qos);
-	cvmx_dprintf("    Buffers:     %u\n", work->word2.s.bufs);
+	cvmx_dprintf("	  Input Port:  %u\n", work->ipprt);
+	cvmx_dprintf("	  QoS:	       %u\n", work->qos);
+	cvmx_dprintf("	  Buffers:     %u\n", work->word2.s.bufs);
 
 	if (work->word2.s.bufs == 0) {
 		union cvmx_ipd_wqe_fpa_queue wqe_pool;
@@ -132,14 +132,14 @@
 	while (remaining_bytes) {
 		start_of_buffer =
 		    ((buffer_ptr.s.addr >> 7) - buffer_ptr.s.back) << 7;
-		cvmx_dprintf("    Buffer Start:%llx\n",
+		cvmx_dprintf("	  Buffer Start:%llx\n",
 			     (unsigned long long)start_of_buffer);
-		cvmx_dprintf("    Buffer I   : %u\n", buffer_ptr.s.i);
-		cvmx_dprintf("    Buffer Back: %u\n", buffer_ptr.s.back);
-		cvmx_dprintf("    Buffer Pool: %u\n", buffer_ptr.s.pool);
-		cvmx_dprintf("    Buffer Data: %llx\n",
+		cvmx_dprintf("	  Buffer I   : %u\n", buffer_ptr.s.i);
+		cvmx_dprintf("	  Buffer Back: %u\n", buffer_ptr.s.back);
+		cvmx_dprintf("	  Buffer Pool: %u\n", buffer_ptr.s.pool);
+		cvmx_dprintf("	  Buffer Data: %llx\n",
 			     (unsigned long long)buffer_ptr.s.addr);
-		cvmx_dprintf("    Buffer Size: %u\n", buffer_ptr.s.size);
+		cvmx_dprintf("	  Buffer Size: %u\n", buffer_ptr.s.size);
 
 		cvmx_dprintf("\t\t");
 		data_address = (uint8_t *) cvmx_phys_to_ptr(buffer_ptr.s.addr);
@@ -172,11 +172,11 @@
  *
  * @queue:  Input queue to setup RED on (0-7)
  * @pass_thresh:
- *               Packets will begin slowly dropping when there are less than
- *               this many packet buffers free in FPA 0.
+ *		 Packets will begin slowly dropping when there are less than
+ *		 this many packet buffers free in FPA 0.
  * @drop_thresh:
- *               All incoming packets will be dropped when there are less
- *               than this many free packet buffers in FPA 0.
+ *		 All incoming packets will be dropped when there are less
+ *		 than this many free packet buffers in FPA 0.
  * Returns Zero on success. Negative on failure
  */
 int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh)
@@ -207,11 +207,11 @@
  * Setup Random Early Drop to automatically begin dropping packets.
  *
  * @pass_thresh:
- *               Packets will begin slowly dropping when there are less than
- *               this many packet buffers free in FPA 0.
+ *		 Packets will begin slowly dropping when there are less than
+ *		 this many packet buffers free in FPA 0.
  * @drop_thresh:
- *               All incoming packets will be dropped when there are less
- *               than this many free packet buffers in FPA 0.
+ *		 All incoming packets will be dropped when there are less
+ *		 than this many free packet buffers in FPA 0.
  * Returns Zero on success. Negative on failure
  */
 int cvmx_helper_setup_red(int pass_thresh, int drop_thresh)
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
index 1723248e..7653b7e 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
@@ -321,9 +321,9 @@
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
index fa49638..d63d20d 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -111,7 +111,7 @@
  * @interface: Interface to probe
  *
  * Returns Mode of the interface. Unknown or unsupported interfaces return
- *         DISABLED.
+ *	   DISABLED.
  */
 cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface)
 {
@@ -187,7 +187,7 @@
  * the defines in executive-config.h.
  *
  * @ipd_port: Port to configure. This follows the IPD numbering, not the
- *                 per interface numbering
+ *		   per interface numbering
  *
  * Returns Zero on success, negative on failure
  */
@@ -591,7 +591,7 @@
  * Function to adjust internal IPD pointer alignments
  *
  * Returns 0 on success
- *         !0 on failure
+ *	   !0 on failure
  */
 int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
 {
@@ -1068,9 +1068,9 @@
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c
index 560e034..fa327ec 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c
@@ -85,11 +85,11 @@
 	if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) {
 		if (mode.s.en) {
 			switch (mode.cn56xx.mode) {
-			case 1:	/* XAUI */
+			case 1: /* XAUI */
 				num_ports = 1;
 				break;
-			case 2:	/* SGMII */
-			case 3:	/* PICMG */
+			case 2: /* SGMII */
+			case 3: /* PICMG */
 				num_ports = 4;
 				break;
 			default:	/* Disabled */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/arch/mips/cavium-octeon/executive/cvmx-l2c.c
index 33b7214..42e38c3 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-l2c.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c
@@ -147,7 +147,7 @@
 	mask &= valid_mask;
 
 	/* A UMSK setting which blocks all L2C Ways is an error on some chips */
-	if (mask == valid_mask  && !OCTEON_IS_MODEL(OCTEON_CN63XX))
+	if (mask == valid_mask	&& !OCTEON_IS_MODEL(OCTEON_CN63XX))
 		return -1;
 
 	if (OCTEON_IS_MODEL(OCTEON_CN63XX))
@@ -438,7 +438,7 @@
 		for (set = 0; set < n_set; set++) {
 			for (assoc = 0; assoc < n_assoc; assoc++) {
 				address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
-						       (assoc << assoc_shift) |	(set << set_shift));
+						       (assoc << assoc_shift) | (set << set_shift));
 				CVMX_CACHE_WBIL2I(address, 0);
 			}
 		}
@@ -573,8 +573,8 @@
  * @index:  Index of the cacheline
  *
  * Returns The Octeon model specific tag structure.  This is
- *         translated by a wrapper function to a generic form that is
- *         easier for applications to use.
+ *	   translated by a wrapper function to a generic form that is
+ *	   easier for applications to use.
  */
 static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index)
 {
@@ -618,12 +618,12 @@
 		".set push\n\t"
 		".set mips64\n\t"
 		".set noreorder\n\t"
-		"sd    %[dbg_val], 0(%[dbg_addr])\n\t"   /* Enter debug mode, wait for store */
+		"sd    %[dbg_val], 0(%[dbg_addr])\n\t"	 /* Enter debug mode, wait for store */
 		"ld    $0, 0(%[dbg_addr])\n\t"
-		"ld    %[tag_val], 0(%[tag_addr])\n\t"   /* Read L2C tag data */
-		"sd    $0, 0(%[dbg_addr])\n\t"          /* Exit debug mode, wait for store */
+		"ld    %[tag_val], 0(%[tag_addr])\n\t"	 /* Read L2C tag data */
+		"sd    $0, 0(%[dbg_addr])\n\t"		/* Exit debug mode, wait for store */
 		"ld    $0, 0(%[dbg_addr])\n\t"
-		"cache 9, 0($0)\n\t"             /* Invalidate dcache to discard debug data */
+		"cache 9, 0($0)\n\t"		 /* Invalidate dcache to discard debug data */
 		".set pop"
 		: [tag_val] "=r" (tag_val)
 		: [dbg_addr] "r" (dbg_addr), [dbg_val] "r" (debug_val), [tag_addr] "r" (debug_tag_addr)
@@ -664,10 +664,10 @@
 		CVMX_SYNC;   /* make sure CVMX_L2C_TADX_TAG is updated */
 		l2c_tadx_tag.u64 = cvmx_read_csr(CVMX_L2C_TADX_TAG(0));
 
-		tag.s.V     = l2c_tadx_tag.s.valid;
-		tag.s.D     = l2c_tadx_tag.s.dirty;
-		tag.s.L     = l2c_tadx_tag.s.lock;
-		tag.s.U     = l2c_tadx_tag.s.use;
+		tag.s.V	    = l2c_tadx_tag.s.valid;
+		tag.s.D	    = l2c_tadx_tag.s.dirty;
+		tag.s.L	    = l2c_tadx_tag.s.lock;
+		tag.s.U	    = l2c_tadx_tag.s.use;
 		tag.s.addr  = l2c_tadx_tag.s.tag;
 	} else {
 		union __cvmx_l2c_tag tmp_tag;
@@ -679,34 +679,34 @@
 		 * as it can represent all models.
 		 */
 		if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
-			tag.s.V    = tmp_tag.cn58xx.V;
-			tag.s.D    = tmp_tag.cn58xx.D;
-			tag.s.L    = tmp_tag.cn58xx.L;
-			tag.s.U    = tmp_tag.cn58xx.U;
+			tag.s.V	   = tmp_tag.cn58xx.V;
+			tag.s.D	   = tmp_tag.cn58xx.D;
+			tag.s.L	   = tmp_tag.cn58xx.L;
+			tag.s.U	   = tmp_tag.cn58xx.U;
 			tag.s.addr = tmp_tag.cn58xx.addr;
 		} else if (OCTEON_IS_MODEL(OCTEON_CN38XX)) {
-			tag.s.V    = tmp_tag.cn38xx.V;
-			tag.s.D    = tmp_tag.cn38xx.D;
-			tag.s.L    = tmp_tag.cn38xx.L;
-			tag.s.U    = tmp_tag.cn38xx.U;
+			tag.s.V	   = tmp_tag.cn38xx.V;
+			tag.s.D	   = tmp_tag.cn38xx.D;
+			tag.s.L	   = tmp_tag.cn38xx.L;
+			tag.s.U	   = tmp_tag.cn38xx.U;
 			tag.s.addr = tmp_tag.cn38xx.addr;
 		} else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) {
-			tag.s.V    = tmp_tag.cn31xx.V;
-			tag.s.D    = tmp_tag.cn31xx.D;
-			tag.s.L    = tmp_tag.cn31xx.L;
-			tag.s.U    = tmp_tag.cn31xx.U;
+			tag.s.V	   = tmp_tag.cn31xx.V;
+			tag.s.D	   = tmp_tag.cn31xx.D;
+			tag.s.L	   = tmp_tag.cn31xx.L;
+			tag.s.U	   = tmp_tag.cn31xx.U;
 			tag.s.addr = tmp_tag.cn31xx.addr;
 		} else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) {
-			tag.s.V    = tmp_tag.cn30xx.V;
-			tag.s.D    = tmp_tag.cn30xx.D;
-			tag.s.L    = tmp_tag.cn30xx.L;
-			tag.s.U    = tmp_tag.cn30xx.U;
+			tag.s.V	   = tmp_tag.cn30xx.V;
+			tag.s.D	   = tmp_tag.cn30xx.D;
+			tag.s.L	   = tmp_tag.cn30xx.L;
+			tag.s.U	   = tmp_tag.cn30xx.U;
 			tag.s.addr = tmp_tag.cn30xx.addr;
 		} else if (OCTEON_IS_MODEL(OCTEON_CN50XX)) {
-			tag.s.V    = tmp_tag.cn50xx.V;
-			tag.s.D    = tmp_tag.cn50xx.D;
-			tag.s.L    = tmp_tag.cn50xx.L;
-			tag.s.U    = tmp_tag.cn50xx.U;
+			tag.s.V	   = tmp_tag.cn50xx.V;
+			tag.s.D	   = tmp_tag.cn50xx.D;
+			tag.s.L	   = tmp_tag.cn50xx.L;
+			tag.s.U	   = tmp_tag.cn50xx.U;
 			tag.s.addr = tmp_tag.cn50xx.addr;
 		} else {
 			cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__);
@@ -865,7 +865,7 @@
 		uint64_t address;
 		/* Create the address based on index and association.
 		 * Bits<20:17> select the way of the cache block involved in
-		 *             the operation
+		 *	       the operation
 		 * Bits<16:7> of the effect address select the index
 		 */
 		address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c
index f557084..f2c8775 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-pko.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c
@@ -99,7 +99,7 @@
  * be called after the FPA has been initialized and filled with pages.
  *
  * Returns 0 on success
- *         !0 on failure
+ *	   !0 on failure
  */
 int cvmx_pko_initialize_local(void)
 {
@@ -186,19 +186,19 @@
 /**
  * Configure a output port and the associated queues for use.
  *
- * @port:       Port to configure.
+ * @port:	Port to configure.
  * @base_queue: First queue number to associate with this port.
  * @num_queues: Number of queues to associate with this port
- * @priority:   Array of priority levels for each queue. Values are
- *                   allowed to be 0-8. A value of 8 get 8 times the traffic
- *                   of a value of 1.  A value of 0 indicates that no rounds
- *                   will be participated in. These priorities can be changed
- *                   on the fly while the pko is enabled. A priority of 9
- *                   indicates that static priority should be used.  If static
- *                   priority is used all queues with static priority must be
- *                   contiguous starting at the base_queue, and lower numbered
- *                   queues have higher priority than higher numbered queues.
- *                   There must be num_queues elements in the array.
+ * @priority:	Array of priority levels for each queue. Values are
+ *		     allowed to be 0-8. A value of 8 get 8 times the traffic
+ *		     of a value of 1.  A value of 0 indicates that no rounds
+ *		     will be participated in. These priorities can be changed
+ *		     on the fly while the pko is enabled. A priority of 9
+ *		     indicates that static priority should be used.  If static
+ *		     priority is used all queues with static priority must be
+ *		     contiguous starting at the base_queue, and lower numbered
+ *		     queues have higher priority than higher numbered queues.
+ *		     There must be num_queues elements in the array.
  */
 cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue,
 				       uint64_t num_queues,
@@ -440,7 +440,7 @@
  * @port:      Port to rate limit
  * @packets_s: Maximum packet/sec
  * @burst:     Maximum number of packets to burst in a row before rate
- *                  limiting cuts in.
+ *		    limiting cuts in.
  *
  * Returns Zero on success, negative on failure
  */
@@ -473,7 +473,7 @@
  * @port:   Port to rate limit
  * @bits_s: PKO rate limit in bits/sec
  * @burst:  Maximum number of bits to burst before rate
- *               limiting cuts in.
+ *		 limiting cuts in.
  *
  * Returns Zero on success, negative on failure
  */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-spi.c b/arch/mips/cavium-octeon/executive/cvmx-spi.c
index 74afb17..ef5198d 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-spi.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-spi.c
@@ -69,7 +69,7 @@
 /**
  * Get current SPI4 initialization callbacks
  *
- * @callbacks:  Pointer to the callbacks structure.to fill
+ * @callbacks:	Pointer to the callbacks structure.to fill
  *
  * Returns Pointer to cvmx_spi_callbacks_t structure.
  */
@@ -92,11 +92,11 @@
  * Initialize and start the SPI interface.
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  * @num_ports: Number of SPI ports to configure
  *
@@ -138,11 +138,11 @@
  * with its correspondent system.
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  *
  * Returns Zero on success, negative of failure.
@@ -160,7 +160,7 @@
 	INVOKE_CB(cvmx_spi_callbacks.reset_cb, interface, mode);
 
 	/* NOTE: Calendar setup is not performed during restart */
-	/*       Refer to cvmx_spi_start_interface() for the full sequence */
+	/*	 Refer to cvmx_spi_start_interface() for the full sequence */
 
 	/* Callback to perform clock detection */
 	INVOKE_CB(cvmx_spi_callbacks.clock_detect_cb, interface, mode, timeout);
@@ -182,11 +182,11 @@
  * Callback to perform SPI4 reset
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  *
  * Returns Zero on success, non-zero error code on failure (will cause
  * SPI initialization to abort)
@@ -297,11 +297,11 @@
  * Callback to setup calendar and miscellaneous settings before clock detection
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @num_ports: Number of ports to configure on SPI
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -382,7 +382,7 @@
 		stxx_spi4_dat.u64 = 0;
 		/*Minimum needed by dynamic alignment */
 		stxx_spi4_dat.s.alpha = 32;
-		stxx_spi4_dat.s.max_t = 0xFFFF;	/*Minimum interval is 0x20 */
+		stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20 */
 		cvmx_write_csr(CVMX_STXX_SPI4_DAT(interface),
 			       stxx_spi4_dat.u64);
 
@@ -416,11 +416,11 @@
  * Callback to perform clock detection
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -494,11 +494,11 @@
  * Callback to perform link training
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for link to be trained (in seconds)
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -563,11 +563,11 @@
  * Callback to perform calendar data synchronization
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for calendar data in seconds
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -620,11 +620,11 @@
  * Callback to handle interface up
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  *
  * Returns Zero on success, non-zero error code on failure (will cause
  * SPI initialization to abort)
diff --git a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
index 8b18a20..3d17fac 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
@@ -74,26 +74,26 @@
 
 /**
  * This function is used in non-simple executive environments (such as
- * Linux kernel, u-boot, etc.)  to configure the minimal fields that
+ * Linux kernel, u-boot, etc.)	to configure the minimal fields that
  * are required to use simple executive files directly.
  *
  * Locking (if required) must be handled outside of this
  * function
  *
  * @phy_mem_desc_ptr:
- *                   Pointer to global physical memory descriptor
- *                   (bootmem descriptor) @board_type: Octeon board
- *                   type enumeration
+ *		     Pointer to global physical memory descriptor
+ *		     (bootmem descriptor) @board_type: Octeon board
+ *		     type enumeration
  *
  * @board_rev_major:
- *                   Board major revision
+ *		     Board major revision
  * @board_rev_minor:
- *                   Board minor revision
+ *		     Board minor revision
  * @cpu_clock_hz:
- *                   CPU clock freqency in hertz
+ *		     CPU clock freqency in hertz
  *
  * Returns 0: Failure
- *         1: success
+ *	   1: success
  */
 int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr,
 				    uint16_t board_type,
diff --git a/arch/mips/cavium-octeon/oct_ilm.c b/arch/mips/cavium-octeon/oct_ilm.c
new file mode 100644
index 0000000..71b213d
--- /dev/null
+++ b/arch/mips/cavium-octeon/oct_ilm.c
@@ -0,0 +1,206 @@
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-ciu-defs.h>
+#include <asm/octeon/cvmx.h>
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+
+#define TIMER_NUM 3
+
+static bool reset_stats;
+
+struct latency_info {
+	u64 io_interval;
+	u64 cpu_interval;
+	u64 timer_start1;
+	u64 timer_start2;
+	u64 max_latency;
+	u64 min_latency;
+	u64 latency_sum;
+	u64 average_latency;
+	u64 interrupt_cnt;
+};
+
+static struct latency_info li;
+static struct dentry *dir;
+
+static int show_latency(struct seq_file *m, void *v)
+{
+	u64 cpuclk, avg, max, min;
+	struct latency_info curr_li = li;
+
+	cpuclk = octeon_get_clock_rate();
+
+	max = (curr_li.max_latency * 1000000000) / cpuclk;
+	min = (curr_li.min_latency * 1000000000) / cpuclk;
+	avg = (curr_li.latency_sum * 1000000000) / (cpuclk * curr_li.interrupt_cnt);
+
+	seq_printf(m, "cnt: %10lld, avg: %7lld ns, max: %7lld ns, min: %7lld ns\n",
+		   curr_li.interrupt_cnt, avg, max, min);
+	return 0;
+}
+
+static int oct_ilm_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, show_latency, NULL);
+}
+
+static const struct file_operations oct_ilm_ops = {
+	.open = oct_ilm_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static int reset_statistics(void *data, u64 value)
+{
+	reset_stats = true;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(reset_statistics_ops, NULL, reset_statistics, "%llu\n");
+
+static int init_debufs(void)
+{
+	struct dentry *show_dentry;
+	dir = debugfs_create_dir("oct_ilm", 0);
+	if (!dir) {
+		pr_err("oct_ilm: failed to create debugfs entry oct_ilm\n");
+		return -1;
+	}
+
+	show_dentry = debugfs_create_file("statistics", 0222, dir, NULL,
+					  &oct_ilm_ops);
+	if (!show_dentry) {
+		pr_err("oct_ilm: failed to create debugfs entry oct_ilm/statistics\n");
+		return -1;
+	}
+
+	show_dentry = debugfs_create_file("reset", 0222, dir, NULL,
+					  &reset_statistics_ops);
+	if (!show_dentry) {
+		pr_err("oct_ilm: failed to create debugfs entry oct_ilm/reset\n");
+		return -1;
+	}
+
+	return 0;
+
+}
+
+static void init_latency_info(struct latency_info *li, int startup)
+{
+	/* interval in milli seconds after which the interrupt will
+	 * be triggered
+	 */
+	int interval = 1;
+
+	if (startup) {
+		/* Calculating by the amounts io clock and cpu clock would
+		 *  increment in interval amount of ms
+		 */
+		li->io_interval = (octeon_get_io_clock_rate() * interval) / 1000;
+		li->cpu_interval = (octeon_get_clock_rate() * interval) / 1000;
+	}
+	li->timer_start1 = 0;
+	li->timer_start2 = 0;
+	li->max_latency = 0;
+	li->min_latency = (u64)-1;
+	li->latency_sum = 0;
+	li->interrupt_cnt = 0;
+}
+
+
+static void start_timer(int timer, u64 interval)
+{
+	union cvmx_ciu_timx timx;
+	unsigned long flags;
+
+	timx.u64 = 0;
+	timx.s.one_shot = 1;
+	timx.s.len = interval;
+	raw_local_irq_save(flags);
+	li.timer_start1 = read_c0_cvmcount();
+	cvmx_write_csr(CVMX_CIU_TIMX(timer), timx.u64);
+	/* Read it back to force wait until register is written. */
+	timx.u64 = cvmx_read_csr(CVMX_CIU_TIMX(timer));
+	li.timer_start2 = read_c0_cvmcount();
+	raw_local_irq_restore(flags);
+}
+
+
+static irqreturn_t cvm_oct_ciu_timer_interrupt(int cpl, void *dev_id)
+{
+	u64 last_latency;
+	u64 last_int_cnt;
+
+	if (reset_stats) {
+		init_latency_info(&li, 0);
+		reset_stats = false;
+	} else {
+		last_int_cnt = read_c0_cvmcount();
+		last_latency = last_int_cnt - (li.timer_start1 + li.cpu_interval);
+		li.interrupt_cnt++;
+		li.latency_sum += last_latency;
+		if (last_latency > li.max_latency)
+			li.max_latency = last_latency;
+		if (last_latency < li.min_latency)
+			li.min_latency = last_latency;
+	}
+	start_timer(TIMER_NUM, li.io_interval);
+	return IRQ_HANDLED;
+}
+
+static void disable_timer(int timer)
+{
+	union cvmx_ciu_timx timx;
+
+	timx.s.one_shot = 0;
+	timx.s.len = 0;
+	cvmx_write_csr(CVMX_CIU_TIMX(timer), timx.u64);
+	/* Read it back to force immediate write of timer register*/
+	timx.u64 = cvmx_read_csr(CVMX_CIU_TIMX(timer));
+}
+
+static __init int oct_ilm_module_init(void)
+{
+	int rc;
+	int irq = OCTEON_IRQ_TIMER0 + TIMER_NUM;
+
+	rc = init_debufs();
+	if (rc) {
+		WARN(1, "Could not create debugfs entries");
+		return rc;
+	}
+
+	rc = request_irq(irq, cvm_oct_ciu_timer_interrupt, IRQF_NO_THREAD,
+			 "oct_ilm", 0);
+	if (rc) {
+		WARN(1, "Could not acquire IRQ %d", irq);
+		goto err_irq;
+	}
+
+	init_latency_info(&li, 1);
+	start_timer(TIMER_NUM, li.io_interval);
+
+	return 0;
+err_irq:
+	debugfs_remove_recursive(dir);
+	return rc;
+}
+
+static __exit void oct_ilm_module_exit(void)
+{
+	disable_timer(TIMER_NUM);
+	if (dir)
+		debugfs_remove_recursive(dir);
+	free_irq(OCTEON_IRQ_TIMER0 + TIMER_NUM, 0);
+}
+
+module_exit(oct_ilm_module_exit);
+module_init(oct_ilm_module_init);
+MODULE_AUTHOR("Venkat Subbiah, Cavium");
+MODULE_DESCRIPTION("Measures interrupt latency on Octeon chips.");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 46f5dbc..156aa61 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -1542,7 +1542,7 @@
 
 	if (line == 3) /* MIO */
 		switch (bit) {
-		case 2:  /* IPD_DRP */
+		case 2:	 /* IPD_DRP */
 		case 8 ... 11: /* Timers */
 		case 48: /* PTP */
 			edge = true;
@@ -1553,7 +1553,7 @@
 	else if (line == 6) /* PKT */
 		switch (bit) {
 		case 52 ... 53: /* ILK_DRP */
-		case 8 ... 12:  /* GMX_DRP */
+		case 8 ... 12:	/* GMX_DRP */
 			edge = true;
 			break;
 		default:
diff --git a/arch/mips/cavium-octeon/octeon-memcpy.S b/arch/mips/cavium-octeon/octeon-memcpy.S
index 0ba0eb9..64e08df 100644
--- a/arch/mips/cavium-octeon/octeon-memcpy.S
+++ b/arch/mips/cavium-octeon/octeon-memcpy.S
@@ -116,15 +116,15 @@
 
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
 #define LDFIRST LOADR
-#define LDREST  LOADL
+#define LDREST	LOADL
 #define STFIRST STORER
-#define STREST  STOREL
+#define STREST	STOREL
 #define SHIFT_DISCARD SLLV
 #else
 #define LDFIRST LOADL
-#define LDREST  LOADR
+#define LDREST	LOADR
 #define STFIRST STOREL
-#define STREST  STORER
+#define STREST	STORER
 #define SHIFT_DISCARD SRLV
 #endif
 
@@ -316,9 +316,9 @@
 
 src_unaligned:
 #define rem t8
-	SRL	t0, len, LOG_NBYTES+2    # +2 for 4 units/iter
+	SRL	t0, len, LOG_NBYTES+2	 # +2 for 4 units/iter
 	beqz	t0, cleanup_src_unaligned
-	 and	rem, len, (4*NBYTES-1)   # rem = len % 4*NBYTES
+	 and	rem, len, (4*NBYTES-1)	 # rem = len % 4*NBYTES
 1:
 /*
  * Avoid consecutive LD*'s to the same register since some mips
@@ -326,13 +326,13 @@
  * It's OK to load FIRST(N+1) before REST(N) because the two addresses
  * are to the same unit (unless src is aligned, but it's not).
  */
-EXC(	LDFIRST	t0, FIRST(0)(src),	l_exc)
-EXC(	LDFIRST	t1, FIRST(1)(src),	l_exc_copy)
-	SUB     len, len, 4*NBYTES
+EXC(	LDFIRST t0, FIRST(0)(src),	l_exc)
+EXC(	LDFIRST t1, FIRST(1)(src),	l_exc_copy)
+	SUB	len, len, 4*NBYTES
 EXC(	LDREST	t0, REST(0)(src),	l_exc_copy)
 EXC(	LDREST	t1, REST(1)(src),	l_exc_copy)
-EXC(	LDFIRST	t2, FIRST(2)(src),	l_exc_copy)
-EXC(	LDFIRST	t3, FIRST(3)(src),	l_exc_copy)
+EXC(	LDFIRST t2, FIRST(2)(src),	l_exc_copy)
+EXC(	LDFIRST t3, FIRST(3)(src),	l_exc_copy)
 EXC(	LDREST	t2, REST(2)(src),	l_exc_copy)
 EXC(	LDREST	t3, REST(3)(src),	l_exc_copy)
 	ADD	src, src, 4*NBYTES
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index 3c1b625..389512e 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -410,7 +410,7 @@
 	pip_path = fdt_getprop(initial_boot_params, aliases, "pip", NULL);
 	if (pip_path) {
 		int pip = fdt_path_offset(initial_boot_params, pip_path);
-		if (pip  >= 0)
+		if (pip	 >= 0)
 			for (i = 0; i <= 4; i++)
 				octeon_fdt_pip_iface(pip, i, &mac_addr_base);
 	}
diff --git a/arch/mips/cavium-octeon/octeon_3xxx.dts b/arch/mips/cavium-octeon/octeon_3xxx.dts
index f28b2d0..88cb42d 100644
--- a/arch/mips/cavium-octeon/octeon_3xxx.dts
+++ b/arch/mips/cavium-octeon/octeon_3xxx.dts
@@ -3,7 +3,7 @@
  * OCTEON 3XXX, 5XXX, 63XX device tree skeleton.
  *
  * This device tree is pruned and patched by early boot code before
- * use.  Because of this, it contains a super-set of the available
+ * use.	 Because of this, it contains a super-set of the available
  * devices and properties.
  */
 / {
@@ -433,12 +433,12 @@
 				cavium,t-we   = <45>;
 				cavium,t-rd-hld = <35>;
 				cavium,t-wr-hld = <45>;
-				cavium,t-pause  = <0>;
-				cavium,t-wait   = <0>;
-				cavium,t-page   = <35>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <0>;
+				cavium,t-page	= <35>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,bus-width = <8>;
 			};
 			cavium,cs-config@4 {
@@ -450,12 +450,12 @@
 				cavium,t-we   = <320>;
 				cavium,t-rd-hld = <320>;
 				cavium,t-wr-hld = <320>;
-				cavium,t-pause  = <320>;
-				cavium,t-wait   = <320>;
-				cavium,t-page   = <320>;
+				cavium,t-pause	= <320>;
+				cavium,t-wait	= <320>;
+				cavium,t-page	= <320>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,bus-width = <8>;
 			};
 			cavium,cs-config@5 {
@@ -467,12 +467,12 @@
 				cavium,t-we   = <150>;
 				cavium,t-rd-hld = <100>;
 				cavium,t-wr-hld = <30>;
-				cavium,t-pause  = <0>;
-				cavium,t-wait   = <30>;
-				cavium,t-page   = <320>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <30>;
+				cavium,t-page	= <320>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,bus-width = <16>;
 			};
 			cavium,cs-config@6 {
@@ -484,12 +484,12 @@
 				cavium,t-we   = <150>;
 				cavium,t-rd-hld = <100>;
 				cavium,t-wr-hld = <70>;
-				cavium,t-pause  = <0>;
-				cavium,t-wait   = <0>;
-				cavium,t-page   = <320>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <0>;
+				cavium,t-page	= <320>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,wait-mode;
 				cavium,bus-width = <16>;
 			};
diff --git a/arch/mips/cavium-octeon/octeon_68xx.dts b/arch/mips/cavium-octeon/octeon_68xx.dts
index 18394689..79b46fc 100644
--- a/arch/mips/cavium-octeon/octeon_68xx.dts
+++ b/arch/mips/cavium-octeon/octeon_68xx.dts
@@ -3,7 +3,7 @@
  * OCTEON 68XX device tree skeleton.
  *
  * This device tree is pruned and patched by early boot code before
- * use.  Because of this, it contains a super-set of the available
+ * use.	 Because of this, it contains a super-set of the available
  * devices and properties.
  */
 / {
@@ -469,12 +469,12 @@
 				cavium,t-we   = <35>;
 				cavium,t-rd-hld = <25>;
 				cavium,t-wr-hld = <35>;
-				cavium,t-pause  = <0>;
-				cavium,t-wait   = <300>;
-				cavium,t-page   = <25>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <300>;
+				cavium,t-page	= <25>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,bus-width = <8>;
 			};
 			cavium,cs-config@4 {
@@ -486,12 +486,12 @@
 				cavium,t-we   = <320>;
 				cavium,t-rd-hld = <320>;
 				cavium,t-wr-hld = <320>;
-				cavium,t-pause  = <320>;
-				cavium,t-wait   = <320>;
-				cavium,t-page   = <320>;
+				cavium,t-pause	= <320>;
+				cavium,t-wait	= <320>;
+				cavium,t-page	= <320>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,bus-width = <8>;
 			};
 			cavium,cs-config@5 {
@@ -503,12 +503,12 @@
 				cavium,t-we   = <150>;
 				cavium,t-rd-hld = <100>;
 				cavium,t-wr-hld = <300>;
-				cavium,t-pause  = <0>;
-				cavium,t-wait   = <300>;
-				cavium,t-page   = <310>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <300>;
+				cavium,t-page	= <310>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,bus-width = <16>;
 			};
 			cavium,cs-config@6 {
@@ -520,12 +520,12 @@
 				cavium,t-we   = <150>;
 				cavium,t-rd-hld = <100>;
 				cavium,t-wr-hld = <30>;
-				cavium,t-pause  = <0>;
-				cavium,t-wait   = <30>;
-				cavium,t-page   = <310>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <30>;
+				cavium,t-page	= <310>;
 				cavium,t-rd-dly = <0>;
 
-				cavium,pages     = <0>;
+				cavium,pages	 = <0>;
 				cavium,wait-mode;
 				cavium,bus-width = <16>;
 			};
diff --git a/arch/mips/cavium-octeon/octeon_boot.h b/arch/mips/cavium-octeon/octeon_boot.h
index 428864b..7b066bb 100644
--- a/arch/mips/cavium-octeon/octeon_boot.h
+++ b/arch/mips/cavium-octeon/octeon_boot.h
@@ -31,7 +31,7 @@
 	uint32_t k0_val;
 	/* Address of boot info block structure */
 	uint64_t boot_info_addr;
-	uint32_t flags;         /* flags */
+	uint32_t flags;		/* flags */
 	uint32_t pad;
 };
 
@@ -53,20 +53,20 @@
 
 /* If not to copy a lot of bootloader's structures
    here is only offset of requested member */
-#define AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK    0x765c
+#define AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK	 0x765c
 
 /* hardcoded in bootloader */
-#define  LABI_ADDR_IN_BOOTLOADER                         0x700
+#define	 LABI_ADDR_IN_BOOTLOADER			 0x700
 
 #define LINUX_APP_BOOT_BLOCK_NAME "linux-app-boot"
 
 #define LABI_SIGNATURE 0xAABBCC01
 
 /*  from uboot-headers/octeon_mem_map.h */
-#define EXCEPTION_BASE_INCR     (4 * 1024)
+#define EXCEPTION_BASE_INCR	(4 * 1024)
 			       /* Increment size for exception base addresses (4k minimum) */
-#define EXCEPTION_BASE_BASE     0
-#define BOOTLOADER_PRIV_DATA_BASE       (EXCEPTION_BASE_BASE + 0x800)
-#define BOOTLOADER_BOOT_VECTOR          (BOOTLOADER_PRIV_DATA_BASE)
+#define EXCEPTION_BASE_BASE	0
+#define BOOTLOADER_PRIV_DATA_BASE	(EXCEPTION_BASE_BASE + 0x800)
+#define BOOTLOADER_BOOT_VECTOR		(BOOTLOADER_PRIV_DATA_BASE)
 
 #endif /* __OCTEON_BOOT_H__ */
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index d7e0a09..c594a3d 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -319,7 +319,7 @@
  * exists on most Cavium evaluation boards. If it doesn't exist, then
  * this function doesn't do anything.
  *
- * @s:      String to write
+ * @s:	    String to write
  */
 void octeon_write_lcd(const char *s)
 {
@@ -341,7 +341,7 @@
 /**
  * Return the console uart passed by the bootloader
  *
- * Returns uart   (0 or 1)
+ * Returns uart	  (0 or 1)
  */
 int octeon_get_boot_uart(void)
 {
@@ -805,7 +805,7 @@
 			/*
 			 * To do: switch parsing to new style, something like:
 			 * parse_crashkernel(arg, sysinfo->system_dram_size,
-			 * 		  &crashk_size, &crashk_base);
+			 *		  &crashk_size, &crashk_base);
 			 */
 #endif
 		} else if (strlen(arcs_cmdline) + strlen(arg) + 1 <
@@ -1013,7 +1013,7 @@
 }
 
 /*
- * Emit one character to the boot UART.  Exported for use by the
+ * Emit one character to the boot UART.	 Exported for use by the
  * watchdog timer.
  */
 int prom_putchar(char c)
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index ee1fb9f..295137d 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -55,7 +55,7 @@
 
 /**
  * Cause the function described by call_data to be executed on the passed
- * cpu.  When the function has finished, increment the finished field of
+ * cpu.	 When the function has finished, increment the finished field of
  * call_data.
  */
 void octeon_send_ipi_single(int cpu, unsigned int action)
@@ -126,8 +126,8 @@
 
 #ifdef CONFIG_HOTPLUG_CPU
 	/*
-	 * The possible CPUs are all those present on the chip.  We
-	 * will assign CPU numbers for possible cores as well.  Cores
+	 * The possible CPUs are all those present on the chip.	 We
+	 * will assign CPU numbers for possible cores as well.	Cores
 	 * are always consecutively numberd from 0.
 	 */
 	for (id = 0; id < num_cores && id < NR_CPUS; id++) {
@@ -332,7 +332,7 @@
 
 static void start_after_reset(void)
 {
-	kernel_entry(0, 0, 0);  /* set a2 = 0 for secondary core */
+	kernel_entry(0, 0, 0);	/* set a2 = 0 for secondary core */
 }
 
 static int octeon_update_boot_vector(unsigned int cpu)
@@ -401,7 +401,7 @@
 }
 late_initcall(register_cavium_notifier);
 
-#endif  /* CONFIG_HOTPLUG_CPU */
+#endif	/* CONFIG_HOTPLUG_CPU */
 
 struct plat_smp_ops octeon_smp_ops = {
 	.send_ipi_single	= octeon_send_ipi_single,
diff --git a/arch/mips/cobalt/led.c b/arch/mips/cobalt/led.c
index d3ce6fa..32265f5 100644
--- a/arch/mips/cobalt/led.c
+++ b/arch/mips/cobalt/led.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt LED platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2007	Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c
index 691d620..8db7b5d 100644
--- a/arch/mips/cobalt/mtd.c
+++ b/arch/mips/cobalt/mtd.c
@@ -25,7 +25,7 @@
 static struct mtd_partition cobalt_mtd_partitions[] = {
 	{
 		.name	= "firmware",
-		.offset	= 0x0,
+		.offset = 0x0,
 		.size	= 0x80000,
 	},
 };
diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c
index 3ab3989..a6bc75a 100644
--- a/arch/mips/cobalt/rtc.c
+++ b/arch/mips/cobalt/rtc.c
@@ -46,7 +46,7 @@
 		return -ENOMEM;
 
 	retval = platform_device_add_resources(pdev, cobalt_rtc_resource,
-	                                       ARRAY_SIZE(cobalt_rtc_resource));
+					       ARRAY_SIZE(cobalt_rtc_resource));
 	if (retval)
 		goto err_free_device;
 
diff --git a/arch/mips/configs/ath79_defconfig b/arch/mips/configs/ath79_defconfig
index ea87d43..e3a3836 100644
--- a/arch/mips/configs/ath79_defconfig
+++ b/arch/mips/configs/ath79_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ATH79=y
 CONFIG_ATH79_MACH_AP121=y
+CONFIG_ATH79_MACH_AP136=y
 CONFIG_ATH79_MACH_AP81=y
 CONFIG_ATH79_MACH_DB120=y
 CONFIG_ATH79_MACH_PB44=y
diff --git a/arch/mips/configs/pnx8550_jbs_defconfig b/arch/mips/configs/pnx8550_jbs_defconfig
deleted file mode 100644
index 1d1f206..0000000
--- a/arch/mips/configs/pnx8550_jbs_defconfig
+++ /dev/null
@@ -1,98 +0,0 @@
-CONFIG_PNX8550_JBS=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_PCI=y
-CONFIG_PM=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SGI_IOC4=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_OFFBOARD=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_HPT366=y
-CONFIG_BLK_DEV_IT8213=m
-CONFIG_BLK_DEV_TC86C001=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_ISCSI_TCP=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-CONFIG_8139TOO_TUNE_TWISTER=y
-CONFIG_8139TOO_8129=y
-CONFIG_CHELSIO_T3=m
-CONFIG_NETXEN_NIC=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_PNX8XXX=y
-CONFIG_SERIAL_PNX8XXX_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRC_CCITT=m
diff --git a/arch/mips/configs/pnx8550_stb810_defconfig b/arch/mips/configs/pnx8550_stb810_defconfig
deleted file mode 100644
index 15c66a5..0000000
--- a/arch/mips/configs/pnx8550_stb810_defconfig
+++ /dev/null
@@ -1,92 +0,0 @@
-CONFIG_PNX8550_STB810=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_PCI=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_OFFBOARD=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_HPT366=y
-CONFIG_BLK_DEV_IT8213=m
-CONFIG_BLK_DEV_TC86C001=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_ISCSI_TCP=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_NET_PCI=y
-CONFIG_NATSEMI=y
-CONFIG_CHELSIO_T3=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_HW_RANDOM=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_DLM=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_HEADERS_CHECK=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRC_CCITT=m
diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig
new file mode 100644
index 0000000..d1741bc
--- /dev/null
+++ b/arch/mips/configs/rt305x_defconfig
@@ -0,0 +1,167 @@
+CONFIG_RALINK=y
+CONFIG_DTB_RT305X_EVAL=y
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_HZ_100=y
+# CONFIG_SECCOMP is not set
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=1000
+CONFIG_INITRAMFS_ROOT_GID=1000
+# CONFIG_RD_GZIP is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_COREDUMP is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_BRIDGE_NETFILTER is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_RAW=m
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+CONFIG_VLAN_8021Q=y
+CONFIG_NET_SCHED=y
+CONFIG_HAMRADIO=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
+CONFIG_PPP=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_ISDN=y
+CONFIG_INPUT=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SPI=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_HID is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_STAGING=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_ZLIB is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_ZLIB is not set
+CONFIG_SQUASHFS_XZ=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32_SARWATE=y
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_SPARC is not set
+CONFIG_AVERAGE=y
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index 82c85281..22afed1 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -55,70 +55,70 @@
  * DS2100/3100's, aka kn01, aka Pmax:
  *
  *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        SCSI
- *             3        Lance Ethernet
- *             4        DZ11 serial
- *             5        RTC
- *             6        Memory Controller & Video
- *             7        FPU
+ *	--------	------
+ *	       0	Software (ignored)
+ *	       1	Software (ignored)
+ *	       2	SCSI
+ *	       3	Lance Ethernet
+ *	       4	DZ11 serial
+ *	       5	RTC
+ *	       6	Memory Controller & Video
+ *	       7	FPU
  *
  * DS5000/200, aka kn02, aka 3max:
  *
  *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        TurboChannel
- *             3        RTC
- *             4        Reserved
- *             5        Memory Controller
- *             6        Reserved
- *             7        FPU
+ *	--------	------
+ *	       0	Software (ignored)
+ *	       1	Software (ignored)
+ *	       2	TurboChannel
+ *	       3	RTC
+ *	       4	Reserved
+ *	       5	Memory Controller
+ *	       6	Reserved
+ *	       7	FPU
  *
  * DS5000/1xx's, aka kn02ba, aka 3min:
  *
  *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        TurboChannel Slot 0
- *             3        TurboChannel Slot 1
- *             4        TurboChannel Slot 2
- *             5        TurboChannel Slot 3 (ASIC)
- *             6        Halt button
- *             7        FPU/R4k timer
+ *	--------	------
+ *	       0	Software (ignored)
+ *	       1	Software (ignored)
+ *	       2	TurboChannel Slot 0
+ *	       3	TurboChannel Slot 1
+ *	       4	TurboChannel Slot 2
+ *	       5	TurboChannel Slot 3 (ASIC)
+ *	       6	Halt button
+ *	       7	FPU/R4k timer
  *
  * DS5000/2x's, aka kn02ca, aka maxine:
  *
  *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        Periodic Interrupt (100usec)
- *             3        RTC
- *             4        I/O write timeout
- *             5        TurboChannel (ASIC)
- *             6        Halt Keycode from Access.Bus keyboard (CTRL-ALT-ENTER)
- *             7        FPU/R4k timer
+ *	--------	------
+ *	       0	Software (ignored)
+ *	       1	Software (ignored)
+ *	       2	Periodic Interrupt (100usec)
+ *	       3	RTC
+ *	       4	I/O write timeout
+ *	       5	TurboChannel (ASIC)
+ *	       6	Halt Keycode from Access.Bus keyboard (CTRL-ALT-ENTER)
+ *	       7	FPU/R4k timer
  *
  * DS5000/2xx's, aka kn03, aka 3maxplus:
  *
  *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        System Board (ASIC)
- *             3        RTC
- *             4        Reserved
- *             5        Memory
- *             6        Halt Button
- *             7        FPU/R4k timer
+ *	--------	------
+ *	       0	Software (ignored)
+ *	       1	Software (ignored)
+ *	       2	System Board (ASIC)
+ *	       3	RTC
+ *	       4	Reserved
+ *	       5	Memory
+ *	       6	Halt Button
+ *	       7	FPU/R4k timer
  *
  * We handle the IRQ according to _our_ priority (see setup.c),
- * then we just return.  If multiple IRQs are pending then we will
+ * then we just return.	 If multiple IRQs are pending then we will
  * just take another exception, big deal.
  */
 		.align	5
@@ -146,7 +146,7 @@
 		/*
 		 * Find irq with highest priority
 		 */
-		 PTR_LA	t1,cpu_mask_nr_tbl
+		 PTR_LA t1,cpu_mask_nr_tbl
 1:		lw	t2,(t1)
 		nop
 		and	t2,t0
@@ -195,7 +195,7 @@
 		/*
 		 * Find irq with highest priority
 		 */
-		 PTR_LA	t1,asic_mask_nr_tbl
+		 PTR_LA t1,asic_mask_nr_tbl
 2:		lw	t2,(t1)
 		nop
 		and	t2,t0
@@ -221,7 +221,7 @@
 		FEXPORT(cpu_all_int)		# HALT, timers, software junk
 		li	a0,DEC_CPU_IRQ_BASE
 		srl	t0,CAUSEB_IP
-		li	t1,CAUSEF_IP>>CAUSEB_IP	# mask
+		li	t1,CAUSEF_IP>>CAUSEB_IP # mask
 		b	1f
 		 li	t2,4			# nr of bits / 2
 
diff --git a/arch/mips/dec/kn02xa-berr.c b/arch/mips/dec/kn02xa-berr.c
index ebb73c5..f434b75 100644
--- a/arch/mips/dec/kn02xa-berr.c
+++ b/arch/mips/dec/kn02xa-berr.c
@@ -128,8 +128,8 @@
 {
 	volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
 
-        /* For KN04 we need to make sure EE (?) is enabled in the MB.  */
-        if (current_cpu_type() == CPU_R4000SC)
+	/* For KN04 we need to make sure EE (?) is enabled in the MB.  */
+	if (current_cpu_type() == CPU_R4000SC)
 		*mbcs |= KN4K_MB_CSR_EE;
 	fast_iob();
 
diff --git a/arch/mips/dec/prom/call_o32.S b/arch/mips/dec/prom/call_o32.S
index 8c84981..c0d1522 100644
--- a/arch/mips/dec/prom/call_o32.S
+++ b/arch/mips/dec/prom/call_o32.S
@@ -14,7 +14,7 @@
 
 /* Maximum number of arguments supported.  Must be even!  */
 #define O32_ARGC	32
-/* Number of static registers we save.  */
+/* Number of static registers we save.	*/
 #define O32_STATC	11
 /* Frame size for both of the above.  */
 #define O32_FRAMESZ	(4 * O32_ARGC + SZREG * O32_STATC)
diff --git a/arch/mips/dec/prom/dectypes.h b/arch/mips/dec/prom/dectypes.h
index 707b6f1..69ea5b9 100644
--- a/arch/mips/dec/prom/dectypes.h
+++ b/arch/mips/dec/prom/dectypes.h
@@ -1,5 +1,5 @@
 #ifndef DECTYPES
-#define	DECTYPES
+#define DECTYPES
 
 #define DS2100_3100	1	/* DS2100/3100	Pmax		*/
 #define DS5000_200	2	/* DS5000/200	3max		*/
diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c
index 93f1239..ab16904 100644
--- a/arch/mips/dec/prom/init.c
+++ b/arch/mips/dec/prom/init.c
@@ -103,7 +103,7 @@
 	if (prom_is_rex(magic))
 		rex_clear_cache();
 
-	/* Register the early console.  */
+	/* Register the early console.	*/
 	register_prom_console();
 
 	/* Were we compiled with the right CPU option? */
diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c
index 8c62316..0aadac7 100644
--- a/arch/mips/dec/prom/memory.c
+++ b/arch/mips/dec/prom/memory.c
@@ -22,7 +22,7 @@
 
 /*
  * Probe memory in 4MB chunks, waiting for an error to tell us we've fallen
- * off the end of real memory.  Only suitable for the 2100/3100's (PMAX).
+ * off the end of real memory.	Only suitable for the 2100/3100's (PMAX).
  */
 
 #define CHUNK_SIZE 0x400000
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index b874accd..741cb42 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -65,7 +65,7 @@
 /*
  * IRQ routing and priority tables.  Priorites are set as follows:
  *
- * 		KN01	KN230	KN02	KN02-BA	KN02-CA	KN03
+ *		KN01	KN230	KN02	KN02-BA KN02-CA KN03
  *
  * MEMORY	CPU	CPU	CPU	ASIC	CPU	CPU
  * RTC		CPU	CPU	CPU	ASIC	CPU	CPU
@@ -413,7 +413,7 @@
 
 /*
  * Machine-specific initialisation for KN02-BA, aka DS5000/1xx
- * (xx = 20, 25, 33), aka 3min.  Also applies to KN04(-BA), aka
+ * (xx = 20, 25, 33), aka 3min.	 Also applies to KN04(-BA), aka
  * DS5000/150, aka 4min.
  */
 static int kn02ba_interrupt[DEC_NR_INTS] __initdata = {
diff --git a/arch/mips/dec/wbflush.c b/arch/mips/dec/wbflush.c
index 43feddd..56bda4a 100644
--- a/arch/mips/dec/wbflush.c
+++ b/arch/mips/dec/wbflush.c
@@ -2,9 +2,9 @@
  * Setup the right wbflush routine for the different DECstations.
  *
  * Created with information from:
- *      DECstation 3100 Desktop Workstation Functional Specification
- *      DECstation 5000/200 KN02 System Module Functional Specification
- *      mipsel-linux-objdump --disassemble vmunix | grep "wbflush" :-)
+ *	DECstation 3100 Desktop Workstation Functional Specification
+ *	DECstation 5000/200 KN02 System Module Functional Specification
+ *	mipsel-linux-objdump --disassemble vmunix | grep "wbflush" :-)
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c
index b5f0825..b880a83 100644
--- a/arch/mips/emma/markeins/irq.c
+++ b/arch/mips/emma/markeins/irq.c
@@ -292,7 +292,7 @@
 
 asmlinkage void plat_irq_dispatch(void)
 {
-        unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
 
 	if (pending & STATUSF_IP7)
 		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
diff --git a/arch/mips/emma/markeins/platform.c b/arch/mips/emma/markeins/platform.c
index b05b08b..99ea004 100644
--- a/arch/mips/emma/markeins/platform.c
+++ b/arch/mips/emma/markeins/platform.c
@@ -190,7 +190,7 @@
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
-        	.platform_data  = &markeins_flash_data,
+		.platform_data	= &markeins_flash_data,
 	},
 	.num_resources	= 1,
 	.resource	= &markeins_flash_resource,
diff --git a/arch/mips/emma/markeins/setup.c b/arch/mips/emma/markeins/setup.c
index feceebc..d710058 100644
--- a/arch/mips/emma/markeins/setup.c
+++ b/arch/mips/emma/markeins/setup.c
@@ -28,7 +28,7 @@
 
 #include <asm/emma/emma2rh.h>
 
-#define	USE_CPU_COUNTER_TIMER	/* whether we use cpu counter */
+#define USE_CPU_COUNTER_TIMER	/* whether we use cpu counter */
 
 extern void markeins_led(const char *);
 
diff --git a/arch/mips/fw/arc/file.c b/arch/mips/fw/arc/file.c
index 3033534..a8b0803 100644
--- a/arch/mips/fw/arc/file.c
+++ b/arch/mips/fw/arc/file.c
@@ -15,7 +15,7 @@
 
 LONG
 ArcGetDirectoryEntry(ULONG FileID, struct linux_vdirent *Buffer,
-                     ULONG N, ULONG *Count)
+		     ULONG N, ULONG *Count)
 {
 	return ARC_CALL4(get_vdirent, FileID, Buffer, N, Count);
 }
@@ -69,7 +69,7 @@
 }
 
 LONG ArcSetFileInformation(ULONG FileID, ULONG AttributeFlags,
-                           ULONG AttributeMask)
+			   ULONG AttributeMask)
 {
 	return ARC_CALL3(set_finfo, FileID, AttributeFlags, AttributeMask);
 }
diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c
index 54a33c7..f90266c 100644
--- a/arch/mips/fw/arc/identify.c
+++ b/arch/mips/fw/arc/identify.c
@@ -100,7 +100,7 @@
 	if (p == NULL) {
 #ifdef CONFIG_SGI_IP27
 		/* IP27 PROM misbehaves, seems to not implement ARC
-		   GetChild().  So we just assume it's an IP27.  */
+		   GetChild().	So we just assume it's an IP27.	 */
 		iname = "SGI-IP27";
 #else
 		iname = "Unknown";
diff --git a/arch/mips/fw/arc/memory.c b/arch/mips/fw/arc/memory.c
index 8b8eea2..5537b94 100644
--- a/arch/mips/fw/arc/memory.c
+++ b/arch/mips/fw/arc/memory.c
@@ -1,6 +1,6 @@
 /*
  * memory.c: PROM library functions for acquiring/using memory descriptors
- *           given to us from the ARCS firmware.
+ *	     given to us from the ARCS firmware.
  *
  * Copyright (C) 1996 by David S. Miller
  * Copyright (C) 1999, 2000, 2001 by Ralf Baechle
diff --git a/arch/mips/fw/arc/promlib.c b/arch/mips/fw/arc/promlib.c
index b7f9dd3..7e8ba5c 100644
--- a/arch/mips/fw/arc/promlib.c
+++ b/arch/mips/fw/arc/promlib.c
@@ -11,7 +11,7 @@
 #include <asm/bcache.h>
 
 /*
- * IP22 boardcache is not compatible with board caches.  Thus we disable it
+ * IP22 boardcache is not compatible with board caches.	 Thus we disable it
  * during romvec action.  Since r4xx0.c is always compiled and linked with your
  * kernel, this shouldn't cause any harm regardless what MIPS processor you
  * have.
diff --git a/arch/mips/fw/lib/call_o32.S b/arch/mips/fw/lib/call_o32.S
index e0a68713..b308b2a 100644
--- a/arch/mips/fw/lib/call_o32.S
+++ b/arch/mips/fw/lib/call_o32.S
@@ -14,7 +14,7 @@
 
 /* Maximum number of arguments supported.  Must be even!  */
 #define O32_ARGC	32
-/* Number of static registers we save.  */
+/* Number of static registers we save.	*/
 #define O32_STATC	11
 /* Frame size for static register  */
 #define O32_FRAMESZ	(SZREG * O32_STATC)
diff --git a/arch/mips/fw/sni/sniprom.c b/arch/mips/fw/sni/sniprom.c
index 96ba992..2c2cb18 100644
--- a/arch/mips/fw/sni/sniprom.c
+++ b/arch/mips/fw/sni/sniprom.c
@@ -28,20 +28,20 @@
  * registers
  */
 #define PROM_GET_MEMCONF	58
-#define PROM_GET_HWCONF         61
+#define PROM_GET_HWCONF		61
 
 #define PROM_VEC		(u64 *)CKSEG1ADDR(0x1fc00000)
 #define PROM_ENTRY(x)		(PROM_VEC + (x))
 
-#define ___prom_putchar         ((int *(*)(int))PROM_ENTRY(PROM_PUTCHAR))
-#define ___prom_getenv          ((char *(*)(char *))PROM_ENTRY(PROM_GETENV))
-#define ___prom_get_memconf     ((void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF))
-#define ___prom_get_hwconf      ((u32 (*)(void))PROM_ENTRY(PROM_GET_HWCONF))
+#define ___prom_putchar		((int *(*)(int))PROM_ENTRY(PROM_PUTCHAR))
+#define ___prom_getenv		((char *(*)(char *))PROM_ENTRY(PROM_GETENV))
+#define ___prom_get_memconf	((void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF))
+#define ___prom_get_hwconf	((u32 (*)(void))PROM_ENTRY(PROM_GET_HWCONF))
 
 #ifdef CONFIG_64BIT
 
 static u8 o32_stk[16384];
-#define O32_STK   &o32_stk[sizeof(o32_stk)]
+#define O32_STK	  &o32_stk[sizeof(o32_stk)]
 
 #define __PROM_O32(fun, arg) fun arg __asm__(#fun); \
 				     __asm__(#fun " = call_o32")
@@ -52,13 +52,13 @@
 u32   __PROM_O32(__prom_get_hwconf, (u32 (*)(void), void *));
 
 #define _prom_putchar(x)     __prom_putchar(___prom_putchar, O32_STK, x)
-#define _prom_getenv(x)      __prom_getenv(___prom_getenv, O32_STK, x)
+#define _prom_getenv(x)	     __prom_getenv(___prom_getenv, O32_STK, x)
 #define _prom_get_memconf(x) __prom_get_memconf(___prom_get_memconf, O32_STK, x)
 #define _prom_get_hwconf()   __prom_get_hwconf(___prom_get_hwconf, O32_STK)
 
 #else
 #define _prom_putchar(x)     ___prom_putchar(x)
-#define _prom_getenv(x)      ___prom_getenv(x)
+#define _prom_getenv(x)	     ___prom_getenv(x)
 #define _prom_get_memconf(x) ___prom_get_memconf(x)
 #define _prom_get_hwconf(x)  ___prom_get_hwconf(x)
 #endif
diff --git a/arch/mips/include/asm/abi.h b/arch/mips/include/asm/abi.h
index 9252d9b..909bb69 100644
--- a/arch/mips/include/asm/abi.h
+++ b/arch/mips/include/asm/abi.h
@@ -14,12 +14,12 @@
 
 struct mips_abi {
 	int (* const setup_frame)(void *sig_return, struct k_sigaction *ka,
-	                          struct pt_regs *regs, int signr,
-	                          sigset_t *set);
+				  struct pt_regs *regs, int signr,
+				  sigset_t *set);
 	const unsigned long	signal_return_offset;
 	int (* const setup_rt_frame)(void *sig_return, struct k_sigaction *ka,
-	                       struct pt_regs *regs, int signr,
-	                       sigset_t *set, siginfo_t *info);
+			       struct pt_regs *regs, int signr,
+			       sigset_t *set, siginfo_t *info);
 	const unsigned long	rt_signal_return_offset;
 	const unsigned long	restart;
 };
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index 569f80a..13d61c0 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -51,14 +51,14 @@
  * Returns the physical address of a CKSEGx / XKPHYS address
  */
 #define CPHYSADDR(a)		((_ACAST32_(a)) & 0x1fffffff)
-#define XPHYSADDR(a)            ((_ACAST64_(a)) &			\
+#define XPHYSADDR(a)		((_ACAST64_(a)) &			\
 				 _CONST64_(0x000000ffffffffff))
 
 #ifdef CONFIG_64BIT
 
 /*
  * Memory segments (64bit kernel mode addresses)
- * The compatibility segments use the full 64-bit sign extended value.  Note
+ * The compatibility segments use the full 64-bit sign extended value.	Note
  * the R8000 doesn't have them so don't reference these in generic MIPS code.
  */
 #define XKUSEG			_CONST64_(0x0000000000000000)
@@ -131,7 +131,7 @@
 
 /*
  * The ultimate limited of the 64-bit MIPS architecture:  2 bits for selecting
- * the region, 3 bits for the CCA mode.  This leaves 59 bits of which the
+ * the region, 3 bits for the CCA mode.	 This leaves 59 bits of which the
  * R8000 implements most with its 48-bit physical address space.
  */
 #define TO_PHYS_MASK	_CONST64_(0x07ffffffffffffff)	/* 2^^59 - 1 */
diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h
index 608cfcf..164a21e 100644
--- a/arch/mips/include/asm/asm.h
+++ b/arch/mips/include/asm/asm.h
@@ -33,12 +33,12 @@
  * Not used for the kernel but here seems to be the right place.
  */
 #ifdef __PIC__
-#define CPRESTORE(register)                             \
+#define CPRESTORE(register)				\
 		.cprestore register
-#define CPADD(register)                                 \
+#define CPADD(register)					\
 		.cpadd	register
-#define CPLOAD(register)                                \
-		.cpload	register
+#define CPLOAD(register)				\
+		.cpload register
 #else
 #define CPRESTORE(register)
 #define CPADD(register)
@@ -48,35 +48,35 @@
 /*
  * LEAF - declare leaf routine
  */
-#define	LEAF(symbol)                                    \
-		.globl	symbol;                         \
-		.align	2;                              \
-		.type	symbol, @function;              \
-		.ent	symbol, 0;                      \
+#define LEAF(symbol)					\
+		.globl	symbol;				\
+		.align	2;				\
+		.type	symbol, @function;		\
+		.ent	symbol, 0;			\
 symbol:		.frame	sp, 0, ra
 
 /*
  * NESTED - declare nested routine entry point
  */
-#define	NESTED(symbol, framesize, rpc)                  \
-		.globl	symbol;                         \
-		.align	2;                              \
-		.type	symbol, @function;              \
-		.ent	symbol, 0;                       \
+#define NESTED(symbol, framesize, rpc)			\
+		.globl	symbol;				\
+		.align	2;				\
+		.type	symbol, @function;		\
+		.ent	symbol, 0;			 \
 symbol:		.frame	sp, framesize, rpc
 
 /*
  * END - mark end of function
  */
-#define	END(function)                                   \
-		.end	function;		        \
+#define END(function)					\
+		.end	function;			\
 		.size	function, .-function
 
 /*
  * EXPORT - export definition of symbol
  */
 #define EXPORT(symbol)					\
-		.globl	symbol;                         \
+		.globl	symbol;				\
 symbol:
 
 /*
@@ -90,16 +90,16 @@
 /*
  * ABS - export absolute symbol
  */
-#define	ABS(symbol,value)                               \
-		.globl	symbol;                         \
+#define ABS(symbol,value)				\
+		.globl	symbol;				\
 symbol		=	value
 
-#define	PANIC(msg)                                      \
+#define PANIC(msg)					\
 		.set	push;				\
-		.set	reorder;                        \
-		PTR_LA	a0, 8f;                          \
-		jal	panic;                          \
-9:		b	9b;                             \
+		.set	reorder;			\
+		PTR_LA	a0, 8f;				 \
+		jal	panic;				\
+9:		b	9b;				\
 		.set	pop;				\
 		TEXT(msg)
 
@@ -107,31 +107,31 @@
  * Print formatted string
  */
 #ifdef CONFIG_PRINTK
-#define PRINT(string)                                   \
+#define PRINT(string)					\
 		.set	push;				\
-		.set	reorder;                        \
-		PTR_LA	a0, 8f;                          \
-		jal	printk;                         \
+		.set	reorder;			\
+		PTR_LA	a0, 8f;				 \
+		jal	printk;				\
 		.set	pop;				\
 		TEXT(string)
 #else
 #define PRINT(string)
 #endif
 
-#define	TEXT(msg)                                       \
+#define TEXT(msg)					\
 		.pushsection .data;			\
-8:		.asciiz	msg;                            \
+8:		.asciiz msg;				\
 		.popsection;
 
 /*
  * Build text tables
  */
-#define TTABLE(string)                                  \
+#define TTABLE(string)					\
 		.pushsection .text;			\
-		.word	1f;                             \
+		.word	1f;				\
 		.popsection				\
 		.pushsection .data;			\
-1:		.asciiz	string;                         \
+1:		.asciiz string;				\
 		.popsection
 
 /*
@@ -143,13 +143,13 @@
  */
 #ifdef CONFIG_CPU_HAS_PREFETCH
 
-#define PREF(hint,addr)                                 \
+#define PREF(hint,addr)					\
 		.set	push;				\
 		.set	mips4;				\
 		pref	hint, addr;			\
 		.set	pop
 
-#define PREFX(hint,addr)                                \
+#define PREFX(hint,addr)				\
 		.set	push;				\
 		.set	mips4;				\
 		prefx	hint, addr;			\
@@ -166,42 +166,42 @@
  * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs.
  */
 #if (_MIPS_ISA == _MIPS_ISA_MIPS1)
-#define MOVN(rd, rs, rt)                                \
+#define MOVN(rd, rs, rt)				\
 		.set	push;				\
 		.set	reorder;			\
-		beqz	rt, 9f;                         \
-		move	rd, rs;                         \
+		beqz	rt, 9f;				\
+		move	rd, rs;				\
 		.set	pop;				\
 9:
-#define MOVZ(rd, rs, rt)                                \
+#define MOVZ(rd, rs, rt)				\
 		.set	push;				\
 		.set	reorder;			\
-		bnez	rt, 9f;                         \
-		move	rd, rs;                         \
+		bnez	rt, 9f;				\
+		move	rd, rs;				\
 		.set	pop;				\
 9:
 #endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */
 #if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3)
-#define MOVN(rd, rs, rt)                                \
+#define MOVN(rd, rs, rt)				\
 		.set	push;				\
 		.set	noreorder;			\
-		bnezl	rt, 9f;                         \
-		 move	rd, rs;                         \
+		bnezl	rt, 9f;				\
+		 move	rd, rs;				\
 		.set	pop;				\
 9:
-#define MOVZ(rd, rs, rt)                                \
+#define MOVZ(rd, rs, rt)				\
 		.set	push;				\
 		.set	noreorder;			\
-		beqzl	rt, 9f;                         \
-		 move	rd, rs;                         \
+		beqzl	rt, 9f;				\
+		 move	rd, rs;				\
 		.set	pop;				\
 9:
 #endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */
 #if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \
     (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64)
-#define MOVN(rd, rs, rt)                                \
+#define MOVN(rd, rs, rt)				\
 		movn	rd, rs, rt
-#define MOVZ(rd, rs, rt)                                \
+#define MOVZ(rd, rs, rt)				\
 		movz	rd, rs, rt
 #endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */
 
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 01cc6ba..08b6079 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -1,5 +1,5 @@
 /*
- * Atomic operations that C can't guarantee us.  Useful for
+ * Atomic operations that C can't guarantee us.	 Useful for
  * resource counting etc..
  *
  * But use these as seldom as possible since they are much more slower
@@ -21,7 +21,7 @@
 #include <asm/cmpxchg.h>
 #include <asm/war.h>
 
-#define ATOMIC_INIT(i)    { (i) }
+#define ATOMIC_INIT(i)	  { (i) }
 
 /*
  * atomic_read - read atomic variable
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
index f7fdc24..314ab55 100644
--- a/arch/mips/include/asm/barrier.h
+++ b/arch/mips/include/asm/barrier.h
@@ -18,7 +18,7 @@
  * over this barrier.  All reads preceding this primitive are guaranteed
  * to access memory (but not necessarily other CPUs' caches) before any
  * reads following this primitive that depend on the data return by
- * any of the preceding reads.  This primitive is much lighter weight than
+ * any of the preceding reads.	This primitive is much lighter weight than
  * rmb() on most CPUs, and is never heavier weight than is
  * rmb().
  *
@@ -43,7 +43,7 @@
  * </programlisting>
  *
  * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().  However,
+ * two reads are separated by a read_barrier_depends().	 However,
  * the following code, with the same initial values for "a" and "b":
  *
  * <programlisting>
@@ -57,7 +57,7 @@
  * </programlisting>
  *
  * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * the read of "a" and the read of "b".	 Therefore, on some CPUs, such
  * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
  * in cases like this where there are no data dependencies.
  */
@@ -92,7 +92,7 @@
 		: "memory")
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 # define OCTEON_SYNCW_STR	".set push\n.set arch=octeon\nsyncw\nsyncw\n.set pop\n"
-# define __syncw() 	__asm__ __volatile__(OCTEON_SYNCW_STR : : : "memory")
+# define __syncw()	__asm__ __volatile__(OCTEON_SYNCW_STR : : : "memory")
 
 # define fast_wmb()	__syncw()
 # define fast_rmb()	barrier()
@@ -158,7 +158,7 @@
 #endif
 
 #if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP)
-#define __WEAK_LLSC_MB		"       sync	\n"
+#define __WEAK_LLSC_MB		"	sync	\n"
 #else
 #define __WEAK_LLSC_MB		"		\n"
 #endif
diff --git a/arch/mips/include/asm/bcache.h b/arch/mips/include/asm/bcache.h
index 0ba9d6e..8c34484 100644
--- a/arch/mips/include/asm/bcache.h
+++ b/arch/mips/include/asm/bcache.h
@@ -11,7 +11,7 @@
 
 
 /* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent,
-   chipset implemented caches.  On machines with other CPUs the CPU does the
+   chipset implemented caches.	On machines with other CPUs the CPU does the
    cache thing itself. */
 struct bcache_ops {
 	void (*bc_enable)(void);
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index 46ac73a..71305a8 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -26,15 +26,15 @@
 #define SZLONG_MASK 31UL
 #define __LL		"ll	"
 #define __SC		"sc	"
-#define __INS		"ins    "
-#define __EXT		"ext    "
+#define __INS		"ins	"
+#define __EXT		"ext	"
 #elif _MIPS_SZLONG == 64
 #define SZLONG_LOG 6
 #define SZLONG_MASK 63UL
 #define __LL		"lld	"
 #define __SC		"scd	"
-#define __INS		"dins    "
-#define __EXT		"dext    "
+#define __INS		"dins	 "
+#define __EXT		"dext	 "
 #endif
 
 /*
@@ -357,7 +357,7 @@
 		"1:	" __LL	"%0, %1		# test_and_clear_bit	\n"
 		"	or	%2, %0, %3				\n"
 		"	xor	%2, %3					\n"
-		"	" __SC 	"%2, %1					\n"
+		"	" __SC	"%2, %1					\n"
 		"	beqzl	%2, 1b					\n"
 		"	and	%2, %0, %3				\n"
 		"	.set	mips0					\n"
@@ -371,10 +371,10 @@
 
 		do {
 			__asm__ __volatile__(
-			"	" __LL	"%0, %1	# test_and_clear_bit	\n"
+			"	" __LL	"%0, %1 # test_and_clear_bit	\n"
 			"	" __EXT "%2, %0, %3, 1			\n"
-			"	" __INS	"%0, $0, %3, 1			\n"
-			"	" __SC 	"%0, %1				\n"
+			"	" __INS "%0, $0, %3, 1			\n"
+			"	" __SC	"%0, %1				\n"
 			: "=&r" (temp), "+m" (*m), "=&r" (res)
 			: "ir" (bit)
 			: "memory");
@@ -387,10 +387,10 @@
 		do {
 			__asm__ __volatile__(
 			"	.set	mips3				\n"
-			"	" __LL	"%0, %1	# test_and_clear_bit	\n"
+			"	" __LL	"%0, %1 # test_and_clear_bit	\n"
 			"	or	%2, %0, %3			\n"
 			"	xor	%2, %3				\n"
-			"	" __SC 	"%2, %1				\n"
+			"	" __SC	"%2, %1				\n"
 			"	.set	mips0				\n"
 			: "=&r" (temp), "+m" (*m), "=&r" (res)
 			: "r" (1UL << bit)
@@ -444,7 +444,7 @@
 		do {
 			__asm__ __volatile__(
 			"	.set	mips3				\n"
-			"	" __LL	"%0, %1	# test_and_change_bit	\n"
+			"	" __LL	"%0, %1 # test_and_change_bit	\n"
 			"	xor	%2, %0, %3			\n"
 			"	" __SC	"\t%2, %1			\n"
 			"	.set	mips0				\n"
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index 7a51d87..b71dd5b 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -44,19 +44,19 @@
 /*
  * Valid machtype for group PMC-MSP
  */
-#define MACH_MSP4200_EVAL       0	/* PMC-Sierra MSP4200 Evaluation */
-#define MACH_MSP4200_GW         1	/* PMC-Sierra MSP4200 Gateway demo */
-#define MACH_MSP4200_FPGA       2	/* PMC-Sierra MSP4200 Emulation */
-#define MACH_MSP7120_EVAL       3	/* PMC-Sierra MSP7120 Evaluation */
-#define MACH_MSP7120_GW         4	/* PMC-Sierra MSP7120 Residential GW */
-#define MACH_MSP7120_FPGA       5	/* PMC-Sierra MSP7120 Emulation */
-#define MACH_MSP_OTHER        255	/* PMC-Sierra unknown board type */
+#define MACH_MSP4200_EVAL	0	/* PMC-Sierra MSP4200 Evaluation */
+#define MACH_MSP4200_GW		1	/* PMC-Sierra MSP4200 Gateway demo */
+#define MACH_MSP4200_FPGA	2	/* PMC-Sierra MSP4200 Emulation */
+#define MACH_MSP7120_EVAL	3	/* PMC-Sierra MSP7120 Evaluation */
+#define MACH_MSP7120_GW		4	/* PMC-Sierra MSP7120 Residential GW */
+#define MACH_MSP7120_FPGA	5	/* PMC-Sierra MSP7120 Emulation */
+#define MACH_MSP_OTHER	      255	/* PMC-Sierra unknown board type */
 
 /*
  * Valid machtype for group Mikrotik
  */
-#define	MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 	*/
-#define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A 	*/
+#define MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532	*/
+#define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A	*/
 
 /*
  * Valid machtype for Loongson family
@@ -67,7 +67,7 @@
 #define MACH_LEMOTE_ML2F7      3
 #define MACH_LEMOTE_YL2F89     4
 #define MACH_DEXXON_GDIUM2F10  5
-#define MACH_LEMOTE_NAS        6
+#define MACH_LEMOTE_NAS	       6
 #define MACH_LEMOTE_LL2F       7
 #define MACH_LOONGSON_END      8
 
diff --git a/arch/mips/include/asm/break.h b/arch/mips/include/asm/break.h
new file mode 100644
index 0000000..0ef1142
--- /dev/null
+++ b/arch/mips/include/asm/break.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 2003 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_BREAK_H
+#define __ASM_BREAK_H
+
+#ifdef __UAPI_ASM_BREAK_H
+#error "Error: Do not directly include <uapi/asm/break.h>"
+#endif
+#include <uapi/asm/break.h>
+
+/*
+ * Break codes used internally to the kernel.
+ */
+#define BRK_KDB		513	/* Used in KDB_ENTER() */
+#define BRK_MEMU	514	/* Used by FPU emulator */
+#define BRK_KPROBE_BP	515	/* Kprobe break */
+#define BRK_KPROBE_SSTEPBP 516	/* Kprobe single step software implementation */
+#define BRK_MULOVF	1023	/* Multiply overflow */
+
+#endif /* __ASM_BREAK_H */
diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h
index 8f99c11..68f37e3 100644
--- a/arch/mips/include/asm/cacheops.h
+++ b/arch/mips/include/asm/cacheops.h
@@ -8,20 +8,20 @@
  * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle
  * (C) Copyright 1999 Silicon Graphics, Inc.
  */
-#ifndef	__ASM_CACHEOPS_H
-#define	__ASM_CACHEOPS_H
+#ifndef __ASM_CACHEOPS_H
+#define __ASM_CACHEOPS_H
 
 /*
  * Cache Operations available on all MIPS processors with R4000-style caches
  */
-#define Index_Invalidate_I      0x00
-#define Index_Writeback_Inv_D   0x01
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D	0x01
 #define Index_Load_Tag_I	0x04
 #define Index_Load_Tag_D	0x05
 #define Index_Store_Tag_I	0x08
 #define Index_Store_Tag_D	0x09
 #if defined(CONFIG_CPU_LOONGSON2)
-#define Hit_Invalidate_I    	0x00
+#define Hit_Invalidate_I	0x00
 #else
 #define Hit_Invalidate_I	0x10
 #endif
@@ -39,8 +39,8 @@
 /*
  * R4000SC and R4400SC-specific cacheops
  */
-#define Index_Invalidate_SI     0x02
-#define Index_Writeback_Inv_SD  0x03
+#define Index_Invalidate_SI	0x02
+#define Index_Writeback_Inv_SD	0x03
 #define Index_Load_Tag_SI	0x06
 #define Index_Load_Tag_SD	0x07
 #define Index_Store_Tag_SI	0x0A
diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h
index f2f7c6c..ac3d2b8 100644
--- a/arch/mips/include/asm/checksum.h
+++ b/arch/mips/include/asm/checksum.h
@@ -194,7 +194,7 @@
 
 #define _HAVE_ARCH_IPV6_CSUM
 static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-				          const struct in6_addr *daddr,
+					  const struct in6_addr *daddr,
 					  __u32 len, unsigned short proto,
 					  __wsum sum)
 {
diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h
index eee10dc..466069b 100644
--- a/arch/mips/include/asm/cmpxchg.h
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -146,7 +146,7 @@
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
 		"	.set	mips3				\n"	\
-		"1:	" ld "	%0, %2		# __cmpxchg_asm	\n"	\
+		"1:	" ld "	%0, %2		# __cmpxchg_asm \n"	\
 		"	bne	%0, %z3, 2f			\n"	\
 		"	.set	mips0				\n"	\
 		"	move	$1, %z4				\n"	\
@@ -163,7 +163,7 @@
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
 		"	.set	mips3				\n"	\
-		"1:	" ld "	%0, %2		# __cmpxchg_asm	\n"	\
+		"1:	" ld "	%0, %2		# __cmpxchg_asm \n"	\
 		"	bne	%0, %z3, 2f			\n"	\
 		"	.set	mips0				\n"	\
 		"	move	$1, %z4				\n"	\
@@ -205,7 +205,7 @@
 									\
 	switch (sizeof(*(__ptr))) {					\
 	case 4:								\
-		__res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new);	\
+		__res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new); \
 		break;							\
 	case 8:								\
 		if (sizeof(long) == 8) {				\
diff --git a/arch/mips/include/asm/compat-signal.h b/arch/mips/include/asm/compat-signal.h
index 6599a90..64e0b934 100644
--- a/arch/mips/include/asm/compat-signal.h
+++ b/arch/mips/include/asm/compat-signal.h
@@ -18,9 +18,9 @@
 	BUG_ON(sizeof(*d) != sizeof(*s));
 	BUG_ON(_NSIG_WORDS != 2);
 
-	err  = __put_user(s->sig[0],       &d->sig[0]);
+	err  = __put_user(s->sig[0],	   &d->sig[0]);
 	err |= __put_user(s->sig[0] >> 32, &d->sig[1]);
-	err |= __put_user(s->sig[1],       &d->sig[2]);
+	err |= __put_user(s->sig[1],	   &d->sig[2]);
 	err |= __put_user(s->sig[1] >> 32, &d->sig[3]);
 
 	return err;
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index ebaae96..c4bd54a 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -120,7 +120,7 @@
 
 typedef u32		compat_old_sigset_t;	/* at least 32 bits */
 
-#define _COMPAT_NSIG		128		/* Don't ask !$@#% ...  */
+#define _COMPAT_NSIG		128		/* Don't ask !$@#% ...	*/
 #define _COMPAT_NSIG_BPW	32
 
 typedef u32		compat_sigset_word;
@@ -168,7 +168,7 @@
 			s32 _addr; /* faulting insn/memory ref. */
 		} _sigfault;
 
-		/* SIGPOLL, SIGXFSZ (To do ...)  */
+		/* SIGPOLL, SIGXFSZ (To do ...)	 */
 		struct {
 			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
 			int _fd;
@@ -179,7 +179,7 @@
 			timer_t _tid;		/* timer id */
 			int _overrun;		/* overrun count */
 			compat_sigval_t _sigval;/* same as below */
-			int _sys_private;       /* not to be passed to user */
+			int _sys_private;	/* not to be passed to user */
 		} _timer;
 
 		/* POSIX.1b signals */
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index c507b93..1a57e8b 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -14,7 +14,7 @@
 #include <cpu-feature-overrides.h>
 
 #ifndef current_cpu_type
-#define current_cpu_type()      current_cpu_data.cputype
+#define current_cpu_type()	current_cpu_data.cputype
 #endif
 
 /*
@@ -87,10 +87,10 @@
 #define cpu_has_mips16		(cpu_data[0].ases & MIPS_ASE_MIPS16)
 #endif
 #ifndef cpu_has_mdmx
-#define cpu_has_mdmx           (cpu_data[0].ases & MIPS_ASE_MDMX)
+#define cpu_has_mdmx	       (cpu_data[0].ases & MIPS_ASE_MDMX)
 #endif
 #ifndef cpu_has_mips3d
-#define cpu_has_mips3d         (cpu_data[0].ases & MIPS_ASE_MIPS3D)
+#define cpu_has_mips3d	       (cpu_data[0].ases & MIPS_ASE_MIPS3D)
 #endif
 #ifndef cpu_has_smartmips
 #define cpu_has_smartmips      (cpu_data[0].ases & MIPS_ASE_SMARTMIPS)
@@ -98,6 +98,9 @@
 #ifndef cpu_has_rixi
 #define cpu_has_rixi		(cpu_data[0].options & MIPS_CPU_RIXI)
 #endif
+#ifndef cpu_has_mmips
+#define cpu_has_mmips		(cpu_data[0].options & MIPS_CPU_MICROMIPS)
+#endif
 #ifndef cpu_has_vtag_icache
 #define cpu_has_vtag_icache	(cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
 #endif
@@ -108,11 +111,11 @@
 #define cpu_has_ic_fills_f_dc	(cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC)
 #endif
 #ifndef cpu_has_pindexed_dcache
-#define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
 #endif
 
 /*
- * I-Cache snoops remote store.  This only matters on SMP.  Some multiprocessors
+ * I-Cache snoops remote store.	 This only matters on SMP.  Some multiprocessors
  * such as the R10000 have I-Caches that snoop local stores; the embedded ones
  * don't.  For maintaining I-cache coherency this means we need to flush the
  * D-cache all the way back to whever the I-cache does refills from, so the
@@ -130,6 +133,19 @@
 #endif
 #endif
 
+# define cpu_has_mips_1		(cpu_data[0].isa_level & MIPS_CPU_ISA_I)
+#ifndef cpu_has_mips_2
+# define cpu_has_mips_2		(cpu_data[0].isa_level & MIPS_CPU_ISA_II)
+#endif
+#ifndef cpu_has_mips_3
+# define cpu_has_mips_3		(cpu_data[0].isa_level & MIPS_CPU_ISA_III)
+#endif
+#ifndef cpu_has_mips_4
+# define cpu_has_mips_4		(cpu_data[0].isa_level & MIPS_CPU_ISA_IV)
+#endif
+#ifndef cpu_has_mips_5
+# define cpu_has_mips_5		(cpu_data[0].isa_level & MIPS_CPU_ISA_V)
+#endif
 # ifndef cpu_has_mips32r1
 # define cpu_has_mips32r1	(cpu_data[0].isa_level & MIPS_CPU_ISA_M32R1)
 # endif
@@ -148,8 +164,8 @@
  */
 #define cpu_has_mips32	(cpu_has_mips32r1 | cpu_has_mips32r2)
 #define cpu_has_mips64	(cpu_has_mips64r1 | cpu_has_mips64r2)
-#define cpu_has_mips_r1	(cpu_has_mips32r1 | cpu_has_mips64r1)
-#define cpu_has_mips_r2	(cpu_has_mips32r2 | cpu_has_mips64r2)
+#define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1)
+#define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2)
 #define cpu_has_mips_r	(cpu_has_mips32r1 | cpu_has_mips32r2 | \
 			 cpu_has_mips64r1 | cpu_has_mips64r2)
 
@@ -159,7 +175,7 @@
 
 /*
  * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
- * pre-MIPS32/MIPS53 processors have CLO, CLZ.  The IDT RC64574 is 64-bit and
+ * pre-MIPS32/MIPS53 processors have CLO, CLZ.	The IDT RC64574 is 64-bit and
  * has CLO and CLZ but not DCLO nor DCLZ.  For 64-bit kernels
  * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
  */
@@ -191,7 +207,7 @@
 # define cpu_has_64bits		(cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
 # endif
 # ifndef cpu_has_64bit_zero_reg
-# define cpu_has_64bit_zero_reg	(cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
+# define cpu_has_64bit_zero_reg (cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
 # endif
 # ifndef cpu_has_64bit_gp_regs
 # define cpu_has_64bit_gp_regs		0
@@ -260,4 +276,8 @@
 #define cpu_has_perf_cntr_intr_bit	(cpu_data[0].options & MIPS_CPU_PCI)
 #endif
 
+#ifndef cpu_has_vz
+#define cpu_has_vz		(cpu_data[0].ases & MIPS_ASE_VZ)
+#endif
+
 #endif /* __ASM_CPU_FEATURES_H */
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
index c454550..41401d8 100644
--- a/arch/mips/include/asm/cpu-info.h
+++ b/arch/mips/include/asm/cpu-info.h
@@ -52,14 +52,14 @@
 	unsigned int		cputype;
 	int			isa_level;
 	int			tlbsize;
-	struct cache_desc	icache;	/* Primary I-cache */
-	struct cache_desc	dcache;	/* Primary D or combined I/D cache */
-	struct cache_desc	scache;	/* Secondary cache */
-	struct cache_desc	tcache;	/* Tertiary/split secondary cache */
-	int			srsets;	/* Shadow register sets */
+	struct cache_desc	icache; /* Primary I-cache */
+	struct cache_desc	dcache; /* Primary D or combined I/D cache */
+	struct cache_desc	scache; /* Secondary cache */
+	struct cache_desc	tcache; /* Tertiary/split secondary cache */
+	int			srsets; /* Shadow register sets */
 	int			core;	/* physical core number */
 #ifdef CONFIG_64BIT
-	int			vmbits;	/* Virtual memory size in bits */
+	int			vmbits; /* Virtual memory size in bits */
 #endif
 #if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
 	/*
@@ -68,12 +68,12 @@
 	 * exception resources, ASID spaces, etc, are common
 	 * to all TCs within the same VPE.
 	 */
-	int			vpe_id;  /* Virtual Processor number */
+	int			vpe_id;	 /* Virtual Processor number */
 #endif
 #ifdef CONFIG_MIPS_MT_SMTC
-	int			tc_id;   /* Thread Context number */
+	int			tc_id;	 /* Thread Context number */
 #endif
-	void 			*data;	/* Additional data */
+	void			*data;	/* Additional data */
 	unsigned int		watch_reg_count;   /* Number that exist */
 	unsigned int		watch_reg_use_cnt; /* Usable by ptrace */
 #define NUM_WATCH_REGS 4
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 90112ad..dd86ab2 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -1,6 +1,6 @@
 /*
  * cpu.h: Values of the PRId register used to match up
- *        various MIPS cpu types.
+ *	  various MIPS cpu types.
  *
  * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
  * Copyright (C) 2004  Maciej W. Rozycki
@@ -9,14 +9,14 @@
 #define _ASM_CPU_H
 
 /* Assigned Company values for bits 23:16 of the PRId Register
-   (CP0 register 15, select 0).  As of the MIPS32 and MIPS64 specs from
+   (CP0 register 15, select 0).	 As of the MIPS32 and MIPS64 specs from
    MTI, the PRId register is defined in this (backwards compatible)
    way:
 
   +----------------+----------------+----------------+----------------+
-  | Company Options| Company ID     | Processor ID   | Revision       |
+  | Company Options| Company ID	    | Processor ID   | Revision	      |
   +----------------+----------------+----------------+----------------+
-   31            24 23            16 15             8 7
+   31		 24 23		  16 15		    8 7
 
    I don't have docs for all the previous processors, but my impression is
    that bits 16-23 have been 0 for all MIPS processors before the MIPS32/64
@@ -29,7 +29,7 @@
 #define PRID_COMP_ALCHEMY	0x030000
 #define PRID_COMP_SIBYTE	0x040000
 #define PRID_COMP_SANDCRAFT	0x050000
-#define PRID_COMP_NXP   	0x060000
+#define PRID_COMP_NXP		0x060000
 #define PRID_COMP_TOSHIBA	0x070000
 #define PRID_COMP_LSI		0x080000
 #define PRID_COMP_LEXRA		0x0b0000
@@ -38,9 +38,9 @@
 #define PRID_COMP_INGENIC	0xd00000
 
 /*
- * Assigned values for the product ID register.  In order to detect a
+ * Assigned values for the product ID register.	 In order to detect a
  * certain CPU type exactly eventually additional registers may need to
- * be examined.  These are valid when 23:16 == PRID_COMP_LEGACY
+ * be examined.	 These are valid when 23:16 == PRID_COMP_LEGACY
  */
 #define PRID_IMP_R2000		0x0100
 #define PRID_IMP_AU1_REV1	0x0100
@@ -96,19 +96,20 @@
 #define PRID_IMP_1004K		0x9900
 #define PRID_IMP_1074K		0x9a00
 #define PRID_IMP_M14KC		0x9c00
+#define PRID_IMP_M14KEC		0x9e00
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
  */
 
-#define PRID_IMP_SB1            0x0100
-#define PRID_IMP_SB1A           0x1100
+#define PRID_IMP_SB1		0x0100
+#define PRID_IMP_SB1A		0x1100
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_SANDCRAFT
  */
 
-#define PRID_IMP_SR71000        0x0400
+#define PRID_IMP_SR71000	0x0400
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
@@ -145,7 +146,7 @@
  * These are the PRID's for when 23:16 == PRID_COMP_INGENIC
  */
 
-#define PRID_IMP_JZRISC        0x0200
+#define PRID_IMP_JZRISC	       0x0200
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_NETLOGIC
@@ -188,9 +189,9 @@
 #define PRID_REV_R3000A		0x0030
 #define PRID_REV_R3000		0x0020
 #define PRID_REV_R2000A		0x0010
-#define PRID_REV_TX3912 	0x0010
-#define PRID_REV_TX3922 	0x0030
-#define PRID_REV_TX3927 	0x0040
+#define PRID_REV_TX3912		0x0010
+#define PRID_REV_TX3922		0x0030
+#define PRID_REV_TX3927		0x0040
 #define PRID_REV_VR4111		0x0050
 #define PRID_REV_VR4181		0x0050	/* Same as VR4111 */
 #define PRID_REV_VR4121		0x0060
@@ -217,9 +218,9 @@
  * FPU implementation/revision register (CP1 control register 0).
  *
  * +---------------------------------+----------------+----------------+
- * | 0                               | Implementation | Revision       |
+ * | 0				     | Implementation | Revision       |
  * +---------------------------------+----------------+----------------+
- *  31                             16 15             8 7              0
+ *  31				   16 15	     8 7	      0
  */
 
 #define FPIR_IMP_NONE		0x0000
@@ -264,6 +265,7 @@
 	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
 	CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
 	CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_LOONGSON1, CPU_M14KC,
+	CPU_M14KEC,
 
 	/*
 	 * MIPS64 class processors
@@ -322,6 +324,7 @@
 #define MIPS_CPU_ULRI		0x00200000 /* CPU has ULRI feature */
 #define MIPS_CPU_PCI		0x00400000 /* CPU has Perf Ctr Int indicator */
 #define MIPS_CPU_RIXI		0x00800000 /* CPU has TLB Read/eXec Inhibit */
+#define MIPS_CPU_MICROMIPS	0x01000000 /* CPU has microMIPS capability */
 
 /*
  * CPU ASE encodings
@@ -333,6 +336,6 @@
 #define MIPS_ASE_DSP		0x00000010 /* Signal Processing ASE */
 #define MIPS_ASE_MIPSMT		0x00000020 /* CPU supports MIPS MT */
 #define MIPS_ASE_DSP2P		0x00000040 /* Signal Processing ASE Rev 2 */
-
+#define MIPS_ASE_VZ		0x00000080 /* Virtualization ASE */
 
 #endif /* _ASM_CPU_H */
diff --git a/arch/mips/include/asm/dec/ioasic_addrs.h b/arch/mips/include/asm/dec/ioasic_addrs.h
index 4cbc1f8a..a8665a7 100644
--- a/arch/mips/include/asm/dec/ioasic_addrs.h
+++ b/arch/mips/include/asm/dec/ioasic_addrs.h
@@ -25,22 +25,22 @@
  */
 #define IOASIC_SYS_ROM	(0*IOASIC_SLOT_SIZE)	/* system board ROM */
 #define IOASIC_IOCTL	(1*IOASIC_SLOT_SIZE)	/* I/O ASIC */
-#define IOASIC_ESAR 	(2*IOASIC_SLOT_SIZE)	/* LANCE MAC address chip */
-#define IOASIC_LANCE 	(3*IOASIC_SLOT_SIZE)	/* LANCE Ethernet */
-#define IOASIC_SCC0 	(4*IOASIC_SLOT_SIZE)	/* SCC #0 */
+#define IOASIC_ESAR	(2*IOASIC_SLOT_SIZE)	/* LANCE MAC address chip */
+#define IOASIC_LANCE	(3*IOASIC_SLOT_SIZE)	/* LANCE Ethernet */
+#define IOASIC_SCC0	(4*IOASIC_SLOT_SIZE)	/* SCC #0 */
 #define IOASIC_VDAC_HI	(5*IOASIC_SLOT_SIZE)	/* VDAC (maxine) */
-#define IOASIC_SCC1 	(6*IOASIC_SLOT_SIZE)	/* SCC #1 (3min, 3max+) */
+#define IOASIC_SCC1	(6*IOASIC_SLOT_SIZE)	/* SCC #1 (3min, 3max+) */
 #define IOASIC_VDAC_LO	(7*IOASIC_SLOT_SIZE)	/* VDAC (maxine) */
-#define IOASIC_TOY 	(8*IOASIC_SLOT_SIZE)	/* RTC */
-#define IOASIC_ISDN 	(9*IOASIC_SLOT_SIZE)	/* ISDN (maxine) */
+#define IOASIC_TOY	(8*IOASIC_SLOT_SIZE)	/* RTC */
+#define IOASIC_ISDN	(9*IOASIC_SLOT_SIZE)	/* ISDN (maxine) */
 #define IOASIC_ERRADDR	(9*IOASIC_SLOT_SIZE)	/* bus error address (3max+) */
-#define IOASIC_CHKSYN 	(10*IOASIC_SLOT_SIZE)	/* ECC syndrome (3max+) */
+#define IOASIC_CHKSYN	(10*IOASIC_SLOT_SIZE)	/* ECC syndrome (3max+) */
 #define IOASIC_ACC_BUS	(10*IOASIC_SLOT_SIZE)	/* ACCESS.bus (maxine) */
-#define IOASIC_MCR 	(11*IOASIC_SLOT_SIZE)	/* memory control (3max+) */
-#define IOASIC_FLOPPY 	(11*IOASIC_SLOT_SIZE)	/* FDC (maxine) */
-#define IOASIC_SCSI 	(12*IOASIC_SLOT_SIZE)	/* ASC SCSI */
+#define IOASIC_MCR	(11*IOASIC_SLOT_SIZE)	/* memory control (3max+) */
+#define IOASIC_FLOPPY	(11*IOASIC_SLOT_SIZE)	/* FDC (maxine) */
+#define IOASIC_SCSI	(12*IOASIC_SLOT_SIZE)	/* ASC SCSI */
 #define IOASIC_FDC_DMA	(13*IOASIC_SLOT_SIZE)	/* FDC DMA (maxine) */
-#define IOASIC_SCSI_DMA	(14*IOASIC_SLOT_SIZE)	/* ??? */
+#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE)	/* ??? */
 #define IOASIC_RES_15	(15*IOASIC_SLOT_SIZE)	/* unused? */
 
 
diff --git a/arch/mips/include/asm/dec/kn01.h b/arch/mips/include/asm/dec/kn01.h
index 88d9ffd..0eb3241 100644
--- a/arch/mips/include/asm/dec/kn01.h
+++ b/arch/mips/include/asm/dec/kn01.h
@@ -57,12 +57,12 @@
 /*
  * System Control & Status Register bits.
  */
-#define KN01_CSR_MNFMOD		(1<<15)	/* MNFMOD manufacturing jumper */
-#define KN01_CSR_STATUS		(1<<14)	/* self-test result status output */
-#define KN01_CSR_PARDIS		(1<<13)	/* parity error disable */
-#define KN01_CSR_CRSRTST	(1<<12)	/* PCC test output */
-#define KN01_CSR_MONO		(1<<11)	/* mono/color fb SIMM installed */
-#define KN01_CSR_MEMERR		(1<<10)	/* write timeout error status & ack*/
+#define KN01_CSR_MNFMOD		(1<<15) /* MNFMOD manufacturing jumper */
+#define KN01_CSR_STATUS		(1<<14) /* self-test result status output */
+#define KN01_CSR_PARDIS		(1<<13) /* parity error disable */
+#define KN01_CSR_CRSRTST	(1<<12) /* PCC test output */
+#define KN01_CSR_MONO		(1<<11) /* mono/color fb SIMM installed */
+#define KN01_CSR_MEMERR		(1<<10) /* write timeout error status & ack*/
 #define KN01_CSR_VINT		(1<<9)	/* PCC area detect #2 status & ack */
 #define KN01_CSR_TXDIS		(1<<8)	/* DZ11 transmit disable */
 #define KN01_CSR_VBGTRG		(1<<2)	/* blue DAC voltage over green (r/o) */
diff --git a/arch/mips/include/asm/dec/kn02ca.h b/arch/mips/include/asm/dec/kn02ca.h
index 92c0fe2..69dc2a9 100644
--- a/arch/mips/include/asm/dec/kn02ca.h
+++ b/arch/mips/include/asm/dec/kn02ca.h
@@ -68,7 +68,7 @@
 #define KN03CA_IO_SSR_ISDN_RST	(1<<12)		/* ~ISDN (Am79C30A) reset */
 
 #define KN03CA_IO_SSR_FLOPPY_RST (1<<7)		/* ~FDC (82077) reset */
-#define KN03CA_IO_SSR_VIDEO_RST	(1<<6)		/* ~framebuffer reset */
+#define KN03CA_IO_SSR_VIDEO_RST (1<<6)		/* ~framebuffer reset */
 #define KN03CA_IO_SSR_AB_RST	(1<<5)		/* ACCESS.bus reset */
 #define KN03CA_IO_SSR_RES_4	(1<<4)		/* unused */
 #define KN03CA_IO_SSR_RES_3	(1<<4)		/* unused */
diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h
index c0ead63..4465777 100644
--- a/arch/mips/include/asm/dec/prom.h
+++ b/arch/mips/include/asm/dec/prom.h
@@ -49,7 +49,7 @@
 
 #ifdef CONFIG_64BIT
 
-#define prom_is_rex(magic)	1	/* KN04 and KN05 are REX PROMs.  */
+#define prom_is_rex(magic)	1	/* KN04 and KN05 are REX PROMs.	 */
 
 #else /* !CONFIG_64BIT */
 
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 006b43e..f8fc74b 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -5,7 +5,7 @@
 #include <asm/cache.h>
 #include <asm-generic/dma-coherent.h>
 
-#ifndef CONFIG_SGI_IP27	/* Kludge to fix 2.6.39 build for IP27 */
+#ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */
 #include <dma-coherence.h>
 #endif
 
diff --git a/arch/mips/include/asm/dma.h b/arch/mips/include/asm/dma.h
index f5097f6..5b9ed1bf 100644
--- a/arch/mips/include/asm/dma.h
+++ b/arch/mips/include/asm/dma.h
@@ -47,21 +47,21 @@
  *
  *  Address mapping for channels 0-3:
  *
- *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *   P7  ...  P0  A7 ... A0  A7 ... A0
- * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *   A23 ... A16 A15 ... A8  A7 ... A0	  (Physical addresses)
+ *    |	 ...  |	  |  ... |   |	... |
+ *    |	 ...  |	  |  ... |   |	... |
+ *    |	 ...  |	  |  ... |   |	... |
+ *   P7	 ...  P0  A7 ... A0  A7 ... A0
+ * |	Page	| Addr MSB | Addr LSB |	  (DMA registers)
  *
  *  Address mapping for channels 5-7:
  *
- *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
- *    |  ...  |   \   \   ... \  \  \  ... \  \
- *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
- *    |  ...  |     \   \   ... \  \  \  ... \
- *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
- * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0	   (Physical addresses)
+ *    |	 ...  |	  \   \	  ... \	 \  \  ... \  \
+ *    |	 ...  |	   \   \   ... \  \  \	... \  (not used)
+ *    |	 ...  |	    \	\   ... \  \  \	 ... \
+ *   P7	 ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
+ * |	  Page	    |  Addr MSB	  |  Addr LSB  |   (DMA registers)
  *
  * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
  * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
@@ -102,55 +102,55 @@
 /* DMA controller registers */
 #define DMA1_CMD_REG		0x08	/* command register (w) */
 #define DMA1_STAT_REG		0x08	/* status register (r) */
-#define DMA1_REQ_REG            0x09    /* request register (w) */
+#define DMA1_REQ_REG		0x09	/* request register (w) */
 #define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
 #define DMA1_MODE_REG		0x0B	/* mode register (w) */
 #define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
+#define DMA1_TEMP_REG		0x0D	/* Temporary Register (r) */
 #define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
-#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
-#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+#define DMA1_CLR_MASK_REG	0x0E	/* Clear Mask */
+#define DMA1_MASK_ALL_REG	0x0F	/* all-channels mask (w) */
 
 #define DMA2_CMD_REG		0xD0	/* command register (w) */
 #define DMA2_STAT_REG		0xD0	/* status register (r) */
-#define DMA2_REQ_REG            0xD2    /* request register (w) */
+#define DMA2_REQ_REG		0xD2	/* request register (w) */
 #define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
 #define DMA2_MODE_REG		0xD6	/* mode register (w) */
 #define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
+#define DMA2_TEMP_REG		0xDA	/* Temporary Register (r) */
 #define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
-#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
-#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+#define DMA2_CLR_MASK_REG	0xDC	/* Clear Mask */
+#define DMA2_MASK_ALL_REG	0xDE	/* all-channels mask (w) */
 
-#define DMA_ADDR_0              0x00    /* DMA address registers */
-#define DMA_ADDR_1              0x02
-#define DMA_ADDR_2              0x04
-#define DMA_ADDR_3              0x06
-#define DMA_ADDR_4              0xC0
-#define DMA_ADDR_5              0xC4
-#define DMA_ADDR_6              0xC8
-#define DMA_ADDR_7              0xCC
+#define DMA_ADDR_0		0x00	/* DMA address registers */
+#define DMA_ADDR_1		0x02
+#define DMA_ADDR_2		0x04
+#define DMA_ADDR_3		0x06
+#define DMA_ADDR_4		0xC0
+#define DMA_ADDR_5		0xC4
+#define DMA_ADDR_6		0xC8
+#define DMA_ADDR_7		0xCC
 
-#define DMA_CNT_0               0x01    /* DMA count registers */
-#define DMA_CNT_1               0x03
-#define DMA_CNT_2               0x05
-#define DMA_CNT_3               0x07
-#define DMA_CNT_4               0xC2
-#define DMA_CNT_5               0xC6
-#define DMA_CNT_6               0xCA
-#define DMA_CNT_7               0xCE
+#define DMA_CNT_0		0x01	/* DMA count registers */
+#define DMA_CNT_1		0x03
+#define DMA_CNT_2		0x05
+#define DMA_CNT_3		0x07
+#define DMA_CNT_4		0xC2
+#define DMA_CNT_5		0xC6
+#define DMA_CNT_6		0xCA
+#define DMA_CNT_7		0xCE
 
-#define DMA_PAGE_0              0x87    /* DMA page registers */
-#define DMA_PAGE_1              0x83
-#define DMA_PAGE_2              0x81
-#define DMA_PAGE_3              0x82
-#define DMA_PAGE_5              0x8B
-#define DMA_PAGE_6              0x89
-#define DMA_PAGE_7              0x8A
+#define DMA_PAGE_0		0x87	/* DMA page registers */
+#define DMA_PAGE_1		0x83
+#define DMA_PAGE_2		0x81
+#define DMA_PAGE_3		0x82
+#define DMA_PAGE_5		0x8B
+#define DMA_PAGE_6		0x89
+#define DMA_PAGE_7		0x8A
 
 #define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
 #define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
+#define DMA_MODE_CASCADE 0xC0	/* pass thru DREQ->HRQ, DACK<-HLDA only */
 
 #define DMA_AUTOINIT	0x10
 
@@ -172,7 +172,7 @@
 static __inline__ void enable_dma(unsigned int dmanr)
 {
 	if (dmanr<=3)
-		dma_outb(dmanr,  DMA1_MASK_REG);
+		dma_outb(dmanr,	 DMA1_MASK_REG);
 	else
 		dma_outb(dmanr & 3,  DMA2_MASK_REG);
 }
@@ -204,7 +204,7 @@
 static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
 {
 	if (dmanr<=3)
-		dma_outb(mode | dmanr,  DMA1_MODE_REG);
+		dma_outb(mode | dmanr,	DMA1_MODE_REG);
 	else
 		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
 }
@@ -248,10 +248,10 @@
 static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
 {
 	set_dma_page(dmanr, a>>16);
-	if (dmanr <= 3)  {
+	if (dmanr <= 3)	 {
 	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-	}  else  {
+	    dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+	}  else	 {
 	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
 	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
 	}
@@ -268,14 +268,14 @@
  */
 static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
 {
-        count--;
-	if (dmanr <= 3)  {
+	count--;
+	if (dmanr <= 3)	 {
 	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
 	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-        } else {
+	} else {
 	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
 	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-        }
+	}
 }
 
 
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index 455c0ac..cf3ae24 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -11,13 +11,13 @@
 
 /* ELF header e_flags defines. */
 /* MIPS architecture level. */
-#define EF_MIPS_ARCH_1		0x00000000	/* -mips1 code.  */
-#define EF_MIPS_ARCH_2		0x10000000	/* -mips2 code.  */
-#define EF_MIPS_ARCH_3		0x20000000	/* -mips3 code.  */
-#define EF_MIPS_ARCH_4		0x30000000	/* -mips4 code.  */
-#define EF_MIPS_ARCH_5		0x40000000	/* -mips5 code.  */
-#define EF_MIPS_ARCH_32		0x50000000	/* MIPS32 code.  */
-#define EF_MIPS_ARCH_64		0x60000000	/* MIPS64 code.  */
+#define EF_MIPS_ARCH_1		0x00000000	/* -mips1 code.	 */
+#define EF_MIPS_ARCH_2		0x10000000	/* -mips2 code.	 */
+#define EF_MIPS_ARCH_3		0x20000000	/* -mips3 code.	 */
+#define EF_MIPS_ARCH_4		0x30000000	/* -mips4 code.	 */
+#define EF_MIPS_ARCH_5		0x40000000	/* -mips5 code.	 */
+#define EF_MIPS_ARCH_32		0x50000000	/* MIPS32 code.	 */
+#define EF_MIPS_ARCH_64		0x60000000	/* MIPS64 code.	 */
 #define EF_MIPS_ARCH_32R2	0x70000000	/* MIPS32 R2 code.  */
 #define EF_MIPS_ARCH_64R2	0x80000000	/* MIPS64 R2 code.  */
 
@@ -74,7 +74,7 @@
 #define R_MIPS_CALL16		11
 #define R_MIPS_GPREL32		12
 /* The remaining relocs are defined on Irix, although they are not
-   in the MIPS ELF ABI.  */
+   in the MIPS ELF ABI.	 */
 #define R_MIPS_UNUSED1		13
 #define R_MIPS_UNUSED2		14
 #define R_MIPS_UNUSED3		15
@@ -214,7 +214,7 @@
 									\
 	if (__h->e_machine != EM_MIPS)					\
 		__res = 0;						\
-	if (__h->e_ident[EI_CLASS] != ELFCLASS64) 			\
+	if (__h->e_ident[EI_CLASS] != ELFCLASS64)			\
 		__res = 0;						\
 									\
 	__res;								\
@@ -292,7 +292,7 @@
 		__SET_PERSONALITY32_O32();				\
 } while (0)
 #else
-#define __SET_PERSONALITY32(ex)	do { } while (0)
+#define __SET_PERSONALITY32(ex) do { } while (0)
 #endif
 
 #define SET_PERSONALITY(ex)						\
@@ -337,11 +337,11 @@
    instruction set this cpu supports.  This could be done in userspace,
    but it's not easy, and we've already done it here.  */
 
-#define ELF_HWCAP       (0)
+#define ELF_HWCAP	(0)
 
 /*
  * This yields a string that ld.so will use to load implementation
- * specific libraries for optimization.  This is more specific in
+ * specific libraries for optimization.	 This is more specific in
  * intent than poking at uname or /proc/cpuinfo.
  */
 
@@ -365,11 +365,11 @@
 
 /* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
    use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
+   the loader.	We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.	*/
 
 #ifndef ELF_ET_DYN_BASE
-#define ELF_ET_DYN_BASE         (TASK_SIZE / 3 * 2)
+#define ELF_ET_DYN_BASE		(TASK_SIZE / 3 * 2)
 #endif
 
 #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
diff --git a/arch/mips/include/asm/emma/emma2rh.h b/arch/mips/include/asm/emma/emma2rh.h
index c1449d2..ecf0596 100644
--- a/arch/mips/include/asm/emma/emma2rh.h
+++ b/arch/mips/include/asm/emma/emma2rh.h
@@ -2,7 +2,7 @@
  *  Copyright (C) NEC Electronics Corporation 2005-2006
  *
  *  This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
- *          Copyright 2001 MontaVista Software Inc.
+ *	    Copyright 2001 MontaVista Software Inc.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -40,7 +40,7 @@
 #define EMMA2RH_BHIF_INT1_EN_2	(0x000058+REGBASE)
 #define EMMA2RH_BHIF_SW_INT	(0x000070+REGBASE)
 #define EMMA2RH_BHIF_SW_INT_EN	(0x000080+REGBASE)
-#define EMMA2RH_BHIF_SW_INT_CLR	(0x000090+REGBASE)
+#define EMMA2RH_BHIF_SW_INT_CLR (0x000090+REGBASE)
 #define EMMA2RH_BHIF_MAIN_CTRL	(0x0000b4+REGBASE)
 #define EMMA2RH_BHIF_EXCEPT_VECT_BASE_ADDRESS	(0x0000c0+REGBASE)
 #define EMMA2RH_GPIO_DIR	(0x110d20+REGBASE)
@@ -73,7 +73,7 @@
  *  Memory map (physical address)
  *
  *  Note most of the following address must be properly aligned by the
- *  corresponding size.  For example, if PCI_IO_SIZE is 16MB, then
+ *  corresponding size.	 For example, if PCI_IO_SIZE is 16MB, then
  *  PCI_IO_BASE must be aligned along 16MB boundary.
  */
 
@@ -96,8 +96,8 @@
 #define EMMA2RH_ROM_BASE	0x1c000000
 #define EMMA2RH_ROM_SIZE	0x04000000	/* 64 MB */
 
-#define EMMA2RH_PCI_CONFIG_BASE	EMMA2RH_PCI_IO_BASE
-#define EMMA2RH_PCI_CONFIG_SIZE	EMMA2RH_PCI_IO_SIZE
+#define EMMA2RH_PCI_CONFIG_BASE EMMA2RH_PCI_IO_BASE
+#define EMMA2RH_PCI_CONFIG_SIZE EMMA2RH_PCI_IO_SIZE
 
 #define NUM_EMMA2RH_IRQ		96
 
@@ -169,51 +169,51 @@
  **/
 
 /*---------------------------------------------------------------------------*/
-/* CNT - Control register (00H R/W)                                          */
+/* CNT - Control register (00H R/W)					     */
 /*---------------------------------------------------------------------------*/
-#define SPT         0x00000001
-#define STT         0x00000002
-#define ACKE        0x00000004
-#define WTIM        0x00000008
-#define SPIE        0x00000010
-#define WREL        0x00000020
-#define LREL        0x00000040
-#define IICE        0x00000080
-#define CNT_RESERVED    0x000000ff	/* reserved bit 0 */
+#define SPT	    0x00000001
+#define STT	    0x00000002
+#define ACKE	    0x00000004
+#define WTIM	    0x00000008
+#define SPIE	    0x00000010
+#define WREL	    0x00000020
+#define LREL	    0x00000040
+#define IICE	    0x00000080
+#define CNT_RESERVED	0x000000ff	/* reserved bit 0 */
 
-#define I2C_EMMA_START      (IICE | STT)
-#define I2C_EMMA_STOP       (IICE | SPT)
+#define I2C_EMMA_START	    (IICE | STT)
+#define I2C_EMMA_STOP	    (IICE | SPT)
 #define I2C_EMMA_REPSTART   I2C_EMMA_START
 
 /*---------------------------------------------------------------------------*/
-/* STA - Status register (10H Read)                                          */
+/* STA - Status register (10H Read)					     */
 /*---------------------------------------------------------------------------*/
-#define MSTS        0x00000080
-#define ALD         0x00000040
-#define EXC         0x00000020
-#define COI         0x00000010
-#define TRC         0x00000008
-#define ACKD        0x00000004
-#define STD         0x00000002
-#define SPD         0x00000001
+#define MSTS	    0x00000080
+#define ALD	    0x00000040
+#define EXC	    0x00000020
+#define COI	    0x00000010
+#define TRC	    0x00000008
+#define ACKD	    0x00000004
+#define STD	    0x00000002
+#define SPD	    0x00000001
 
 /*---------------------------------------------------------------------------*/
-/* CSEL - Clock select register (20H R/W)                                    */
+/* CSEL - Clock select register (20H R/W)				     */
 /*---------------------------------------------------------------------------*/
-#define FCL         0x00000080
-#define ND50        0x00000040
-#define CLD         0x00000020
-#define DAD         0x00000010
-#define SMC         0x00000008
-#define DFC         0x00000004
-#define CL          0x00000003
-#define CSEL_RESERVED   0x000000ff	/* reserved bit 0 */
+#define FCL	    0x00000080
+#define ND50	    0x00000040
+#define CLD	    0x00000020
+#define DAD	    0x00000010
+#define SMC	    0x00000008
+#define DFC	    0x00000004
+#define CL	    0x00000003
+#define CSEL_RESERVED	0x000000ff	/* reserved bit 0 */
 
-#define FAST397     0x0000008b
-#define FAST297     0x0000008a
-#define FAST347     0x0000000b
-#define FAST260     0x0000000a
-#define FAST130     0x00000008
+#define FAST397	    0x0000008b
+#define FAST297	    0x0000008a
+#define FAST347	    0x0000000b
+#define FAST260	    0x0000000a
+#define FAST130	    0x00000008
 #define STANDARD108 0x00000083
 #define STANDARD83  0x00000082
 #define STANDARD95  0x00000003
@@ -222,32 +222,32 @@
 #define STANDARD71  0x00000000
 
 /*---------------------------------------------------------------------------*/
-/* SVA - Slave address register (30H R/W)                                    */
+/* SVA - Slave address register (30H R/W)				     */
 /*---------------------------------------------------------------------------*/
-#define SVA         0x000000fe
+#define SVA	    0x000000fe
 
 /*---------------------------------------------------------------------------*/
-/* SHR - Shift register (40H R/W)                                            */
+/* SHR - Shift register (40H R/W)					     */
 /*---------------------------------------------------------------------------*/
-#define SR          0x000000ff
+#define SR	    0x000000ff
 
 /*---------------------------------------------------------------------------*/
-/* INT - Interrupt register (50H R/W)                                        */
-/* INTM - Interrupt mask register (60H R/W)                                  */
+/* INT - Interrupt register (50H R/W)					     */
+/* INTM - Interrupt mask register (60H R/W)				     */
 /*---------------------------------------------------------------------------*/
-#define INTE0       0x00000001
+#define INTE0	    0x00000001
 
 /***********************************************************************
  * I2C registers
  ***********************************************************************
  */
-#define I2C_EMMA_CNT            0x00
-#define I2C_EMMA_STA            0x10
-#define I2C_EMMA_CSEL           0x20
-#define I2C_EMMA_SVA            0x30
-#define I2C_EMMA_SHR            0x40
-#define I2C_EMMA_INT            0x50
-#define I2C_EMMA_INTM           0x60
+#define I2C_EMMA_CNT		0x00
+#define I2C_EMMA_STA		0x10
+#define I2C_EMMA_CSEL		0x20
+#define I2C_EMMA_SVA		0x30
+#define I2C_EMMA_SHR		0x40
+#define I2C_EMMA_INT		0x50
+#define I2C_EMMA_INTM		0x60
 
 /*
  * include the board dependent part
diff --git a/arch/mips/include/asm/emma/markeins.h b/arch/mips/include/asm/emma/markeins.h
index bf2d229..e55a674 100644
--- a/arch/mips/include/asm/emma/markeins.h
+++ b/arch/mips/include/asm/emma/markeins.h
@@ -2,7 +2,7 @@
  *  Copyright (C) NEC Electronics Corporation 2005-2006
  *
  *  This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
- *          Copyright 2001 MontaVista Software Inc.
+ *	    Copyright 2001 MontaVista Software Inc.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h
index 98bcc98..dfaaf493 100644
--- a/arch/mips/include/asm/fixmap.h
+++ b/arch/mips/include/asm/fixmap.h
@@ -95,7 +95,7 @@
 	if (idx >= __end_of_fixed_addresses)
 		__this_fixmap_does_not_exist();
 
-        return __fix_to_virt(idx);
+	return __fix_to_virt(idx);
 }
 
 static inline unsigned long virt_to_fix(const unsigned long vaddr)
@@ -111,7 +111,7 @@
  * Called from pgtable_init()
  */
 extern void fixrange_init(unsigned long start, unsigned long end,
-        pgd_t *pgd_base);
+	pgd_t *pgd_base);
 
 
 #endif
diff --git a/arch/mips/include/asm/floppy.h b/arch/mips/include/asm/floppy.h
index 4456c9c..d75aed3 100644
--- a/arch/mips/include/asm/floppy.h
+++ b/arch/mips/include/asm/floppy.h
@@ -24,9 +24,9 @@
  * And on Mips's the CMOS info fails also ...
  *
  * FIXME: This information should come from the ARC configuration tree
- *        or wherever a particular machine has stored this ...
+ *	  or wherever a particular machine has stored this ...
  */
-#define FLOPPY0_TYPE 		fd_drive_type(0)
+#define FLOPPY0_TYPE		fd_drive_type(0)
 #define FLOPPY1_TYPE		fd_drive_type(1)
 
 #define FDC1			fd_getfdaddr1()
diff --git a/arch/mips/include/asm/fpregdef.h b/arch/mips/include/asm/fpregdef.h
index 2b5fddc..429481f 100644
--- a/arch/mips/include/asm/fpregdef.h
+++ b/arch/mips/include/asm/fpregdef.h
@@ -20,15 +20,15 @@
  * These definitions only cover the R3000-ish 16/32 register model.
  * But we're trying to be R3000 friendly anyway ...
  */
-#define fv0	$f0      /* return value */
+#define fv0	$f0	 /* return value */
 #define fv0f	$f1
 #define fv1	$f2
 #define fv1f	$f3
-#define fa0	$f12     /* argument registers */
+#define fa0	$f12	 /* argument registers */
 #define fa0f	$f13
 #define fa1	$f14
 #define fa1f	$f15
-#define ft0	$f4      /* caller saved */
+#define ft0	$f4	 /* caller saved */
 #define ft0f	$f5
 #define ft1	$f6
 #define ft1f	$f7
@@ -40,7 +40,7 @@
 #define ft4f	$f17
 #define ft5	$f18
 #define ft5f	$f19
-#define fs0	$f20     /* callee saved */
+#define fs0	$f20	 /* callee saved */
 #define fs0f	$f21
 #define fs1	$f22
 #define fs1f	$f23
@@ -53,7 +53,7 @@
 #define fs5	$f30
 #define fs5f	$f31
 
-#define fcr31	$31      /* FPU status register */
+#define fcr31	$31	 /* FPU status register */
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index 7fcef8e..d088e5d 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -35,14 +35,14 @@
 
 #define __enable_fpu()							\
 do {									\
-        set_c0_status(ST0_CU1);						\
-        enable_fpu_hazard();						\
+	set_c0_status(ST0_CU1);						\
+	enable_fpu_hazard();						\
 } while (0)
 
 #define __disable_fpu()							\
 do {									\
 	clear_c0_status(ST0_CU1);					\
-        disable_fpu_hazard();						\
+	disable_fpu_hazard();						\
 } while (0)
 
 #define enable_fpu()							\
diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h
index 6ebf173..6ea1581 100644
--- a/arch/mips/include/asm/futex.h
+++ b/arch/mips/include/asm/futex.h
@@ -92,24 +92,24 @@
 
 	switch (op) {
 	case FUTEX_OP_SET:
-		__futex_atomic_op("move	$1, %z5", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("move $1, %z5", ret, oldval, uaddr, oparg);
 		break;
 
 	case FUTEX_OP_ADD:
-		__futex_atomic_op("addu	$1, %1, %z5",
-		                  ret, oldval, uaddr, oparg);
+		__futex_atomic_op("addu $1, %1, %z5",
+				  ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_OR:
 		__futex_atomic_op("or	$1, %1, %z5",
-		                  ret, oldval, uaddr, oparg);
+				  ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
 		__futex_atomic_op("and	$1, %1, %z5",
-		                  ret, oldval, uaddr, ~oparg);
+				  ret, oldval, uaddr, ~oparg);
 		break;
 	case FUTEX_OP_XOR:
 		__futex_atomic_op("xor	$1, %1, %z5",
-		                  ret, oldval, uaddr, oparg);
+				  ret, oldval, uaddr, oparg);
 		break;
 	default:
 		ret = -ENOSYS;
diff --git a/arch/mips/include/asm/fw/arc/hinv.h b/arch/mips/include/asm/fw/arc/hinv.h
index e6ff4ad..f8d37d1 100644
--- a/arch/mips/include/asm/fw/arc/hinv.h
+++ b/arch/mips/include/asm/fw/arc/hinv.h
@@ -12,7 +12,7 @@
 	SystemClass,
 	ProcessorClass,
 	CacheClass,
-#ifndef	_NT_PROM
+#ifndef _NT_PROM
 	MemoryClass,
 	AdapterClass,
 	ControllerClass,
@@ -34,7 +34,7 @@
 	SecondaryICache,
 	SecondaryDCache,
 	SecondaryCache,
-#ifndef	_NT_PROM
+#ifndef _NT_PROM
 	Memory,
 #endif
 	EISAAdapter,
@@ -93,7 +93,7 @@
 } IDENTIFIERFLAG;
 
 #ifndef NULL			/* for GetChild(NULL); */
-#define	NULL	0
+#define NULL	0
 #endif
 
 union key_u {
@@ -125,7 +125,7 @@
 	IDENTIFIERFLAG	Flags;
 	USHORT		Version;
 	USHORT		Revision;
-	ULONG 		Key;
+	ULONG		Key;
 	ULONG		AffinityMask;
 	ULONG		ConfigurationDataSize;
 	ULONG		IdentifierLength;
@@ -149,7 +149,7 @@
 typedef enum memorytype {
 	ExceptionBlock,
 	SPBPage,			/* ARCS == SystemParameterBlock */
-#ifndef	_NT_PROM
+#ifndef _NT_PROM
 	FreeContiguous,
 	FreeMemory,
 	BadMemory,
diff --git a/arch/mips/include/asm/fw/arc/types.h b/arch/mips/include/asm/fw/arc/types.h
index 2b11f87..ad16380 100644
--- a/arch/mips/include/asm/fw/arc/types.h
+++ b/arch/mips/include/asm/fw/arc/types.h
@@ -15,7 +15,7 @@
 typedef char		CHAR;
 typedef short		SHORT;
 typedef long		LARGE_INTEGER __attribute__ ((__mode__ (__DI__)));
-typedef	long		LONG __attribute__ ((__mode__ (__SI__)));
+typedef long		LONG __attribute__ ((__mode__ (__SI__)));
 typedef unsigned char	UCHAR;
 typedef unsigned short	USHORT;
 typedef unsigned long	ULONG __attribute__ ((__mode__ (__SI__)));
@@ -23,11 +23,11 @@
 
 /* The pointer types.  Note that we're using a 64-bit compiler but all
    pointer in the ARC structures are only 32-bit, so we need some disgusting
-   workarounds.  Keep your vomit bag handy.  */
+   workarounds.	 Keep your vomit bag handy.  */
 typedef LONG		_PCHAR;
 typedef LONG		_PSHORT;
 typedef LONG		_PLARGE_INTEGER;
-typedef	LONG		_PLONG;
+typedef LONG		_PLONG;
 typedef LONG		_PUCHAR;
 typedef LONG		_PUSHORT;
 typedef LONG		_PULONG;
@@ -40,7 +40,7 @@
 typedef char		CHAR;
 typedef short		SHORT;
 typedef long		LARGE_INTEGER __attribute__ ((__mode__ (__DI__)));
-typedef	long		LONG __attribute__ ((__mode__ (__DI__)));
+typedef long		LONG __attribute__ ((__mode__ (__DI__)));
 typedef unsigned char	UCHAR;
 typedef unsigned short	USHORT;
 typedef unsigned long	ULONG __attribute__ ((__mode__ (__DI__)));
@@ -51,7 +51,7 @@
 typedef CHAR		*_PCHAR;
 typedef SHORT		*_PSHORT;
 typedef LARGE_INTEGER	*_PLARGE_INTEGER;
-typedef	LONG		*_PLONG;
+typedef LONG		*_PLONG;
 typedef UCHAR		*_PUCHAR;
 typedef USHORT		*_PUSHORT;
 typedef ULONG		*_PULONG;
@@ -62,7 +62,7 @@
 typedef CHAR		*PCHAR;
 typedef SHORT		*PSHORT;
 typedef LARGE_INTEGER	*PLARGE_INTEGER;
-typedef	LONG		*PLONG;
+typedef LONG		*PLONG;
 typedef UCHAR		*PUCHAR;
 typedef USHORT		*PUSHORT;
 typedef ULONG		*PULONG;
diff --git a/arch/mips/include/asm/fw/cfe/cfe_api.h b/arch/mips/include/asm/fw/cfe/cfe_api.h
index 0995575..1734755 100644
--- a/arch/mips/include/asm/fw/cfe/cfe_api.h
+++ b/arch/mips/include/asm/fw/cfe/cfe_api.h
@@ -40,7 +40,7 @@
 /* Seal indicating CFE's presence, passed to user program. */
 #define CFE_EPTSEAL 0x43464531
 
-#define CFE_MI_RESERVED	0	/* memory is reserved, do not use */
+#define CFE_MI_RESERVED 0	/* memory is reserved, do not use */
 #define CFE_MI_AVAILABLE 1	/* memory is available */
 
 #define CFE_FLG_WARMSTART     0x00000001
@@ -52,13 +52,13 @@
 
 #define CFE_STDHANDLE_CONSOLE	0
 
-#define CFE_DEV_NETWORK 	1
+#define CFE_DEV_NETWORK		1
 #define CFE_DEV_DISK		2
 #define CFE_DEV_FLASH		3
 #define CFE_DEV_SERIAL		4
 #define CFE_DEV_CPU		5
 #define CFE_DEV_NVRAM		6
-#define CFE_DEV_CLOCK           7
+#define CFE_DEV_CLOCK		7
 #define CFE_DEV_OTHER		8
 #define CFE_DEV_MASK		0x0F
 
diff --git a/arch/mips/include/asm/fw/cfe/cfe_error.h b/arch/mips/include/asm/fw/cfe/cfe_error.h
index b803746..fc0e91f 100644
--- a/arch/mips/include/asm/fw/cfe/cfe_error.h
+++ b/arch/mips/include/asm/fw/cfe/cfe_error.h
@@ -25,7 +25,7 @@
  */
 
 #define CFE_OK			 0
-#define CFE_ERR                 -1	/* generic error */
+#define CFE_ERR			-1	/* generic error */
 #define CFE_ERR_INV_COMMAND	-2
 #define CFE_ERR_EOF		-3
 #define CFE_ERR_IOERR		-4
@@ -37,12 +37,12 @@
 #define CFE_ERR_ENVREADONLY	-10
 
 #define CFE_ERR_NOTELF		-11
-#define CFE_ERR_NOT32BIT 	-12
-#define CFE_ERR_WRONGENDIAN 	-13
-#define CFE_ERR_BADELFVERS 	-14
-#define CFE_ERR_NOTMIPS 	-15
-#define CFE_ERR_BADELFFMT 	-16
-#define CFE_ERR_BADADDR 	-17
+#define CFE_ERR_NOT32BIT	-12
+#define CFE_ERR_WRONGENDIAN	-13
+#define CFE_ERR_BADELFVERS	-14
+#define CFE_ERR_NOTMIPS		-15
+#define CFE_ERR_BADELFFMT	-16
+#define CFE_ERR_BADADDR		-17
 
 #define CFE_ERR_FILENOTFOUND	-18
 #define CFE_ERR_UNSUPPORTED	-19
@@ -73,8 +73,8 @@
 
 #define CFE_ERR_NOTREADY	-36
 
-#define CFE_ERR_GETMEM          -37
-#define CFE_ERR_SETMEM          -38
+#define CFE_ERR_GETMEM		-37
+#define CFE_ERR_SETMEM		-38
 
 #define CFE_ERR_NOTCONN		-39
 #define CFE_ERR_ADDRINUSE	-40
diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h
index c0cf76a..a7359f7 100644
--- a/arch/mips/include/asm/gcmpregs.h
+++ b/arch/mips/include/asm/gcmpregs.h
@@ -32,7 +32,7 @@
 
 /* GCMP register access */
 #define GCMPGCB(reg)			REGP(_gcmp_base, GCMPGCBOFS(reg))
-#define GCMPGCBn(reg, n)               REGP(_gcmp_base, GCMPGCBOFSn(reg, n))
+#define GCMPGCBn(reg, n)	       REGP(_gcmp_base, GCMPGCBOFSn(reg, n))
 #define GCMPCLCB(reg)			REGP(_gcmp_base, GCMPCLCBOFS(reg))
 #define GCMPCOCB(reg)			REGP(_gcmp_base, GCMPCOCBOFS(reg))
 #define GCMPGDB(reg)			REGP(_gcmp_base, GCMPGDBOFS(reg))
@@ -45,76 +45,76 @@
 
 /* GCB registers */
 #define GCMP_GCB_GC_OFS			0x0000	/* Global Config Register */
-#define  GCMP_GCB_GC_NUMIOCU_SHF	8
-#define  GCMP_GCB_GC_NUMIOCU_MSK	GCMPGCBMSK(GC_NUMIOCU, 4)
-#define  GCMP_GCB_GC_NUMCORES_SHF	0
-#define  GCMP_GCB_GC_NUMCORES_MSK	GCMPGCBMSK(GC_NUMCORES, 8)
+#define	 GCMP_GCB_GC_NUMIOCU_SHF	8
+#define	 GCMP_GCB_GC_NUMIOCU_MSK	GCMPGCBMSK(GC_NUMIOCU, 4)
+#define	 GCMP_GCB_GC_NUMCORES_SHF	0
+#define	 GCMP_GCB_GC_NUMCORES_MSK	GCMPGCBMSK(GC_NUMCORES, 8)
 #define GCMP_GCB_GCMPB_OFS		0x0008		/* Global GCMP Base */
-#define  GCMP_GCB_GCMPB_GCMPBASE_SHF	15
-#define  GCMP_GCB_GCMPB_GCMPBASE_MSK	GCMPGCBMSK(GCMPB_GCMPBASE, 17)
-#define  GCMP_GCB_GCMPB_CMDEFTGT_SHF	0
-#define  GCMP_GCB_GCMPB_CMDEFTGT_MSK	GCMPGCBMSK(GCMPB_CMDEFTGT, 2)
-#define  GCMP_GCB_GCMPB_CMDEFTGT_DISABLED	0
-#define  GCMP_GCB_GCMPB_CMDEFTGT_MEM		1
-#define  GCMP_GCB_GCMPB_CMDEFTGT_IOCU1		2
-#define  GCMP_GCB_GCMPB_CMDEFTGT_IOCU2		3
+#define	 GCMP_GCB_GCMPB_GCMPBASE_SHF	15
+#define	 GCMP_GCB_GCMPB_GCMPBASE_MSK	GCMPGCBMSK(GCMPB_GCMPBASE, 17)
+#define	 GCMP_GCB_GCMPB_CMDEFTGT_SHF	0
+#define	 GCMP_GCB_GCMPB_CMDEFTGT_MSK	GCMPGCBMSK(GCMPB_CMDEFTGT, 2)
+#define	 GCMP_GCB_GCMPB_CMDEFTGT_DISABLED	0
+#define	 GCMP_GCB_GCMPB_CMDEFTGT_MEM		1
+#define	 GCMP_GCB_GCMPB_CMDEFTGT_IOCU1		2
+#define	 GCMP_GCB_GCMPB_CMDEFTGT_IOCU2		3
 #define GCMP_GCB_CCMC_OFS		0x0010	/* Global CM Control */
 #define GCMP_GCB_GCSRAP_OFS		0x0020	/* Global CSR Access Privilege */
-#define  GCMP_GCB_GCSRAP_CMACCESS_SHF	0
-#define  GCMP_GCB_GCSRAP_CMACCESS_MSK	GCMPGCBMSK(GCSRAP_CMACCESS, 8)
+#define	 GCMP_GCB_GCSRAP_CMACCESS_SHF	0
+#define	 GCMP_GCB_GCSRAP_CMACCESS_MSK	GCMPGCBMSK(GCSRAP_CMACCESS, 8)
 #define GCMP_GCB_GCMPREV_OFS		0x0030	/* GCMP Revision Register */
 #define GCMP_GCB_GCMEM_OFS		0x0040	/* Global CM Error Mask */
 #define GCMP_GCB_GCMEC_OFS		0x0048	/* Global CM Error Cause */
-#define  GCMP_GCB_GMEC_ERROR_TYPE_SHF	27
-#define  GCMP_GCB_GMEC_ERROR_TYPE_MSK	GCMPGCBMSK(GMEC_ERROR_TYPE, 5)
-#define  GCMP_GCB_GMEC_ERROR_INFO_SHF	0
-#define  GCMP_GCB_GMEC_ERROR_INFO_MSK	GCMPGCBMSK(GMEC_ERROR_INFO, 27)
+#define	 GCMP_GCB_GMEC_ERROR_TYPE_SHF	27
+#define	 GCMP_GCB_GMEC_ERROR_TYPE_MSK	GCMPGCBMSK(GMEC_ERROR_TYPE, 5)
+#define	 GCMP_GCB_GMEC_ERROR_INFO_SHF	0
+#define	 GCMP_GCB_GMEC_ERROR_INFO_MSK	GCMPGCBMSK(GMEC_ERROR_INFO, 27)
 #define GCMP_GCB_GCMEA_OFS		0x0050	/* Global CM Error Address */
 #define GCMP_GCB_GCMEO_OFS		0x0058	/* Global CM Error Multiple */
-#define  GCMP_GCB_GMEO_ERROR_2ND_SHF	0
-#define  GCMP_GCB_GMEO_ERROR_2ND_MSK	GCMPGCBMSK(GMEO_ERROR_2ND, 5)
+#define	 GCMP_GCB_GMEO_ERROR_2ND_SHF	0
+#define	 GCMP_GCB_GMEO_ERROR_2ND_MSK	GCMPGCBMSK(GMEO_ERROR_2ND, 5)
 #define GCMP_GCB_GICBA_OFS		0x0080	/* Global Interrupt Controller Base Address */
-#define  GCMP_GCB_GICBA_BASE_SHF	17
-#define  GCMP_GCB_GICBA_BASE_MSK	GCMPGCBMSK(GICBA_BASE, 15)
-#define  GCMP_GCB_GICBA_EN_SHF		0
-#define  GCMP_GCB_GICBA_EN_MSK		GCMPGCBMSK(GICBA_EN, 1)
+#define	 GCMP_GCB_GICBA_BASE_SHF	17
+#define	 GCMP_GCB_GICBA_BASE_MSK	GCMPGCBMSK(GICBA_BASE, 15)
+#define	 GCMP_GCB_GICBA_EN_SHF		0
+#define	 GCMP_GCB_GICBA_EN_MSK		GCMPGCBMSK(GICBA_EN, 1)
 
 /* GCB Regions */
 #define GCMP_GCB_CMxBASE_OFS(n)		(0x0090+16*(n))		/* Global Region[0-3] Base Address */
-#define  GCMP_GCB_CMxBASE_BASE_SHF	16
-#define  GCMP_GCB_CMxBASE_BASE_MSK	GCMPGCBMSK(CMxBASE_BASE, 16)
+#define	 GCMP_GCB_CMxBASE_BASE_SHF	16
+#define	 GCMP_GCB_CMxBASE_BASE_MSK	GCMPGCBMSK(CMxBASE_BASE, 16)
 #define GCMP_GCB_CMxMASK_OFS(n)		(0x0098+16*(n))		/* Global Region[0-3] Address Mask */
-#define  GCMP_GCB_CMxMASK_MASK_SHF	16
-#define  GCMP_GCB_CMxMASK_MASK_MSK	GCMPGCBMSK(CMxMASK_MASK, 16)
-#define  GCMP_GCB_CMxMASK_CMREGTGT_SHF	0
-#define  GCMP_GCB_CMxMASK_CMREGTGT_MSK	GCMPGCBMSK(CMxMASK_CMREGTGT, 2)
-#define  GCMP_GCB_CMxMASK_CMREGTGT_MEM	 0
-#define  GCMP_GCB_CMxMASK_CMREGTGT_MEM1  1
-#define  GCMP_GCB_CMxMASK_CMREGTGT_IOCU1 2
-#define  GCMP_GCB_CMxMASK_CMREGTGT_IOCU2 3
+#define	 GCMP_GCB_CMxMASK_MASK_SHF	16
+#define	 GCMP_GCB_CMxMASK_MASK_MSK	GCMPGCBMSK(CMxMASK_MASK, 16)
+#define	 GCMP_GCB_CMxMASK_CMREGTGT_SHF	0
+#define	 GCMP_GCB_CMxMASK_CMREGTGT_MSK	GCMPGCBMSK(CMxMASK_CMREGTGT, 2)
+#define	 GCMP_GCB_CMxMASK_CMREGTGT_MEM	 0
+#define	 GCMP_GCB_CMxMASK_CMREGTGT_MEM1	 1
+#define	 GCMP_GCB_CMxMASK_CMREGTGT_IOCU1 2
+#define	 GCMP_GCB_CMxMASK_CMREGTGT_IOCU2 3
 
 
 /* Core local/Core other control block registers */
 #define GCMP_CCB_RESETR_OFS		0x0000			/* Reset Release */
-#define  GCMP_CCB_RESETR_INRESET_SHF	0
-#define  GCMP_CCB_RESETR_INRESET_MSK	GCMPCCBMSK(RESETR_INRESET, 16)
+#define	 GCMP_CCB_RESETR_INRESET_SHF	0
+#define	 GCMP_CCB_RESETR_INRESET_MSK	GCMPCCBMSK(RESETR_INRESET, 16)
 #define GCMP_CCB_COHCTL_OFS		0x0008			/* Coherence Control */
-#define  GCMP_CCB_COHCTL_DOMAIN_SHF	0
-#define  GCMP_CCB_COHCTL_DOMAIN_MSK	GCMPCCBMSK(COHCTL_DOMAIN, 8)
+#define	 GCMP_CCB_COHCTL_DOMAIN_SHF	0
+#define	 GCMP_CCB_COHCTL_DOMAIN_MSK	GCMPCCBMSK(COHCTL_DOMAIN, 8)
 #define GCMP_CCB_CFG_OFS		0x0010			/* Config */
-#define  GCMP_CCB_CFG_IOCUTYPE_SHF	10
-#define  GCMP_CCB_CFG_IOCUTYPE_MSK	GCMPCCBMSK(CFG_IOCUTYPE, 2)
-#define   GCMP_CCB_CFG_IOCUTYPE_CPU	0
-#define   GCMP_CCB_CFG_IOCUTYPE_NCIOCU	1
-#define   GCMP_CCB_CFG_IOCUTYPE_CIOCU	2
-#define  GCMP_CCB_CFG_NUMVPE_SHF	0
-#define  GCMP_CCB_CFG_NUMVPE_MSK	GCMPCCBMSK(CFG_NUMVPE, 10)
+#define	 GCMP_CCB_CFG_IOCUTYPE_SHF	10
+#define	 GCMP_CCB_CFG_IOCUTYPE_MSK	GCMPCCBMSK(CFG_IOCUTYPE, 2)
+#define	  GCMP_CCB_CFG_IOCUTYPE_CPU	0
+#define	  GCMP_CCB_CFG_IOCUTYPE_NCIOCU	1
+#define	  GCMP_CCB_CFG_IOCUTYPE_CIOCU	2
+#define	 GCMP_CCB_CFG_NUMVPE_SHF	0
+#define	 GCMP_CCB_CFG_NUMVPE_MSK	GCMPCCBMSK(CFG_NUMVPE, 10)
 #define GCMP_CCB_OTHER_OFS		0x0018		/* Other Address */
-#define  GCMP_CCB_OTHER_CORENUM_SHF	16
-#define  GCMP_CCB_OTHER_CORENUM_MSK	GCMPCCBMSK(OTHER_CORENUM, 16)
+#define	 GCMP_CCB_OTHER_CORENUM_SHF	16
+#define	 GCMP_CCB_OTHER_CORENUM_MSK	GCMPCCBMSK(OTHER_CORENUM, 16)
 #define GCMP_CCB_RESETBASE_OFS		0x0020		/* Reset Exception Base */
-#define  GCMP_CCB_RESETBASE_BEV_SHF	12
-#define  GCMP_CCB_RESETBASE_BEV_MSK	GCMPCCBMSK(RESETBASE_BEV, 20)
+#define	 GCMP_CCB_RESETBASE_BEV_SHF	12
+#define	 GCMP_CCB_RESETBASE_BEV_MSK	GCMPCCBMSK(RESETBASE_BEV, 20)
 #define GCMP_CCB_ID_OFS			0x0028		/* Identification */
 #define GCMP_CCB_DINTGROUP_OFS		0x0030		/* DINT Group Participate */
 #define GCMP_CCB_DBGGROUP_OFS		0x0100		/* DebugBreak Group */
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 37620db..bdc9786 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -66,7 +66,7 @@
 
 /* Register Map for Shared Section */
 
-#define	GIC_SH_CONFIG_OFS		0x0000
+#define GIC_SH_CONFIG_OFS		0x0000
 
 /* Shared Global Counter */
 #define GIC_SH_COUNTER_31_00_OFS	0x0010
@@ -146,13 +146,13 @@
 #define GIC_SH_PEND_223_192_OFS		0x0498
 #define GIC_SH_PEND_255_224_OFS		0x049c
 
-#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS	0x0500
+#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500
 
 /* Maps Interrupt X to a Pin */
 #define GIC_SH_MAP_TO_PIN(intr) \
 	(GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr))
 
-#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS	0x2000
+#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2000
 
 /* Maps Interrupt X to a VPE */
 #define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \
@@ -326,7 +326,7 @@
 	unsigned int polarity;	/* Polarity : +/-	*/
 	unsigned int trigtype;	/* Trigger  : Edge/Levl */
 	unsigned int flags;	/* Misc flags	*/
-#define GIC_FLAG_IPI           0x01
+#define GIC_FLAG_IPI	       0x01
 #define GIC_FLAG_TRANSPARENT   0x02
 };
 
@@ -343,10 +343,10 @@
 
 /* GIC nomenclature for Core Interrupt Pins. */
 #define GIC_CPU_INT0		0 /* Core Interrupt 2 */
-#define GIC_CPU_INT1		1 /* .                */
-#define GIC_CPU_INT2		2 /* .                */
-#define GIC_CPU_INT3		3 /* .                */
-#define GIC_CPU_INT4		4 /* .                */
+#define GIC_CPU_INT1		1 /* .		      */
+#define GIC_CPU_INT2		2 /* .		      */
+#define GIC_CPU_INT3		3 /* .		      */
+#define GIC_CPU_INT4		4 /* .		      */
 #define GIC_CPU_INT5		5 /* Core Interrupt 5 */
 
 /* Local GIC interrupts. */
@@ -359,6 +359,7 @@
 /* Mapped interrupt to pin X, then GIC will generate the vector (X+1). */
 #define GIC_PIN_TO_VEC_OFFSET	(1)
 
+extern int gic_present;
 extern unsigned long _gic_base;
 extern unsigned int gic_irq_base;
 extern unsigned int gic_irq_flags[];
diff --git a/arch/mips/include/asm/gio_device.h b/arch/mips/include/asm/gio_device.h
index 5437c84..0878701 100644
--- a/arch/mips/include/asm/gio_device.h
+++ b/arch/mips/include/asm/gio_device.h
@@ -6,15 +6,15 @@
 };
 
 struct gio_device {
-	struct device   dev;
+	struct device	dev;
 	struct resource resource;
-	unsigned int    irq;
-	unsigned int    slotno;
+	unsigned int	irq;
+	unsigned int	slotno;
 
-	const char      *name;
+	const char	*name;
 	struct gio_device_id id;
-	unsigned        id32:1;
-	unsigned        gio64:1;
+	unsigned	id32:1;
+	unsigned	gio64:1;
 };
 #define to_gio_device(d) container_of(d, struct gio_device, dev)
 
@@ -50,7 +50,7 @@
 extern int gio_register_driver(struct gio_driver *);
 extern void gio_unregister_driver(struct gio_driver *);
 
-#define gio_get_drvdata(_dev)        drv_get_drvdata(&(_dev)->dev)
+#define gio_get_drvdata(_dev)	     drv_get_drvdata(&(_dev)->dev)
 #define gio_set_drvdata(_dev, data)  drv_set_drvdata(&(_dev)->dev, (data))
 
 extern void gio_set_master(struct gio_device *);
diff --git a/arch/mips/include/asm/gt64120.h b/arch/mips/include/asm/gt64120.h
index 0aa44ab..2e72abb 100644
--- a/arch/mips/include/asm/gt64120.h
+++ b/arch/mips/include/asm/gt64120.h
@@ -34,7 +34,7 @@
 
 #define GT_MULTI_OFS		0x120
 
-/* CPU Address Decode.  */
+/* CPU Address Decode.	*/
 #define GT_SCS10LD_OFS		0x008
 #define GT_SCS10HD_OFS		0x010
 #define GT_SCS32LD_OFS		0x018
@@ -106,12 +106,12 @@
 
 #define GT_ADERR_OFS		0x470
 
-/* SDRAM Configuration.  */
+/* SDRAM Configuration.	 */
 #define GT_SDRAM_CFG_OFS	0x448
 
 #define GT_SDRAM_OPMODE_OFS	0x474
 #define GT_SDRAM_BM_OFS		0x478
-#define GT_SDRAM_ADDRDECODE_OFS	0x47c
+#define GT_SDRAM_ADDRDECODE_OFS 0x47c
 
 /* SDRAM Parameters.  */
 #define GT_SDRAM_B0_OFS		0x44c
@@ -126,14 +126,14 @@
 #define GT_DEV_B3_OFS		0x468
 #define GT_DEV_BOOT_OFS		0x46c
 
-/* ECC.  */
+/* ECC.	 */
 #define GT_ECC_ERRDATALO	0x480			/* GT-64120A only  */
 #define GT_ECC_ERRDATAHI	0x484			/* GT-64120A only  */
 #define GT_ECC_MEM		0x488			/* GT-64120A only  */
 #define GT_ECC_CALC		0x48c			/* GT-64120A only  */
 #define GT_ECC_ERRADDR		0x490			/* GT-64120A only  */
 
-/* DMA Record.  */
+/* DMA Record.	*/
 #define GT_DMA0_CNT_OFS		0x800
 #define GT_DMA1_CNT_OFS		0x804
 #define GT_DMA2_CNT_OFS		0x808
@@ -156,13 +156,13 @@
 #define GT_DMA2_CUR_OFS		0x878
 #define GT_DMA3_CUR_OFS		0x87c
 
-/* DMA Channel Control.  */
+/* DMA Channel Control.	 */
 #define GT_DMA0_CTRL_OFS	0x840
 #define GT_DMA1_CTRL_OFS	0x844
 #define GT_DMA2_CTRL_OFS	0x848
 #define GT_DMA3_CTRL_OFS	0x84c
 
-/* DMA Arbiter.  */
+/* DMA Arbiter.	 */
 #define GT_DMA_ARB_OFS		0x860
 
 /* Timer/Counter.  */
@@ -220,7 +220,7 @@
 #define GT_PCI0_CFGADDR_OFS	0xcf8
 #define GT_PCI0_CFGDATA_OFS	0xcfc
 
-/* Interrupts.  */
+/* Interrupts.	*/
 #define GT_INTRCAUSE_OFS	0xc18
 #define GT_INTRMASK_OFS		0xc1c
 
@@ -547,15 +547,15 @@
 #define GT_DEF_BASE		0x14000000UL
 
 #define GT_MAX_BANKSIZE		(256 * 1024 * 1024)	/* Max 256MB bank  */
-#define GT_LATTIM_MIN		6			/* Minimum lat  */
+#define GT_LATTIM_MIN		6			/* Minimum lat	*/
 
 /*
  * The gt64120_dep.h file must define the following macros
  *
  *   GT_READ(ofs, data_pointer)
- *   GT_WRITE(ofs, data)           - read/write GT64120 registers in 32bit
+ *   GT_WRITE(ofs, data)	   - read/write GT64120 registers in 32bit
  *
- *   TIMER 	- gt64120 timer irq, temporary solution until
+ *   TIMER	- gt64120 timer irq, temporary solution until
  *		  full gt64120 cascade interrupt support is in place
  */
 
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index f0324e9..44d6a5b 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -25,7 +25,7 @@
 }
 
 /*
- * MIPS R2 instruction hazard barrier.   Needs to be called as a subroutine.
+ * MIPS R2 instruction hazard barrier.	 Needs to be called as a subroutine.
  */
 extern void mips_ihb(void);
 
@@ -68,7 +68,7 @@
 	)
 /*
  * gcc has a tradition of misscompiling the previous construct using the
- * address of a label as argument to inline assembler.  Gas otoh has the
+ * address of a label as argument to inline assembler.	Gas otoh has the
  * annoying difference between la and dla which are only usable for 32-bit
  * rsp. 64-bit code, so can't be used without conditional compilation.
  * The alterantive is switching the assembler to 64-bit code which happens
@@ -114,7 +114,7 @@
 	)
 /*
  * gcc has a tradition of misscompiling the previous construct using the
- * address of a label as argument to inline assembler.  Gas otoh has the
+ * address of a label as argument to inline assembler.	Gas otoh has the
  * annoying difference between la and dla which are only usable for 32-bit
  * rsp. 64-bit code, so can't be used without conditional compilation.
  * The alterantive is switching the assembler to 64-bit code which happens
@@ -141,7 +141,7 @@
 
 #elif defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
 	defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \
-	defined(CONFIG_CPU_R5500)
+	defined(CONFIG_CPU_R5500) || defined(CONFIG_CPU_XLR)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h
index 2d91888..b0dd0c8 100644
--- a/arch/mips/include/asm/highmem.h
+++ b/arch/mips/include/asm/highmem.h
@@ -39,8 +39,8 @@
  */
 #define LAST_PKMAP 1024
 #define LAST_PKMAP_MASK (LAST_PKMAP-1)
-#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
-#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+#define PKMAP_NR(virt)	((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)	(PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
 extern void * kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
diff --git a/arch/mips/include/asm/inst.h b/arch/mips/include/asm/inst.h
index 33c34adb..f1eadf7 100644
--- a/arch/mips/include/asm/inst.h
+++ b/arch/mips/include/asm/inst.h
@@ -11,353 +11,7 @@
 #ifndef _ASM_INST_H
 #define _ASM_INST_H
 
-/*
- * Major opcodes; before MIPS IV cop1x was called cop3.
- */
-enum major_op {
-	spec_op, bcond_op, j_op, jal_op,
-	beq_op, bne_op, blez_op, bgtz_op,
-	addi_op, addiu_op, slti_op, sltiu_op,
-	andi_op, ori_op, xori_op, lui_op,
-	cop0_op, cop1_op, cop2_op, cop1x_op,
-	beql_op, bnel_op, blezl_op, bgtzl_op,
-	daddi_op, daddiu_op, ldl_op, ldr_op,
-	spec2_op, jalx_op, mdmx_op, spec3_op,
-	lb_op, lh_op, lwl_op, lw_op,
-	lbu_op, lhu_op, lwr_op, lwu_op,
-	sb_op, sh_op, swl_op, sw_op,
-	sdl_op, sdr_op, swr_op, cache_op,
-	ll_op, lwc1_op, lwc2_op, pref_op,
-	lld_op, ldc1_op, ldc2_op, ld_op,
-	sc_op, swc1_op, swc2_op, major_3b_op,
-	scd_op, sdc1_op, sdc2_op, sd_op
-};
-
-/*
- * func field of spec opcode.
- */
-enum spec_op {
-	sll_op, movc_op, srl_op, sra_op,
-	sllv_op, pmon_op, srlv_op, srav_op,
-	jr_op, jalr_op, movz_op, movn_op,
-	syscall_op, break_op, spim_op, sync_op,
-	mfhi_op, mthi_op, mflo_op, mtlo_op,
-	dsllv_op, spec2_unused_op, dsrlv_op, dsrav_op,
-	mult_op, multu_op, div_op, divu_op,
-	dmult_op, dmultu_op, ddiv_op, ddivu_op,
-	add_op, addu_op, sub_op, subu_op,
-	and_op, or_op, xor_op, nor_op,
-	spec3_unused_op, spec4_unused_op, slt_op, sltu_op,
-	dadd_op, daddu_op, dsub_op, dsubu_op,
-	tge_op, tgeu_op, tlt_op, tltu_op,
-	teq_op, spec5_unused_op, tne_op, spec6_unused_op,
-	dsll_op, spec7_unused_op, dsrl_op, dsra_op,
-	dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op
-};
-
-/*
- * func field of spec2 opcode.
- */
-enum spec2_op {
-	madd_op, maddu_op, mul_op, spec2_3_unused_op,
-	msub_op, msubu_op, /* more unused ops */
-	clz_op = 0x20, clo_op,
-	dclz_op = 0x24, dclo_op,
-	sdbpp_op = 0x3f
-};
-
-/*
- * func field of spec3 opcode.
- */
-enum spec3_op {
-	ext_op, dextm_op, dextu_op, dext_op,
-	ins_op, dinsm_op, dinsu_op, dins_op,
-	lx_op = 0x0a,
-	bshfl_op = 0x20,
-	dbshfl_op = 0x24,
-	rdhwr_op = 0x3b
-};
-
-/*
- * rt field of bcond opcodes.
- */
-enum rt_op {
-	bltz_op, bgez_op, bltzl_op, bgezl_op,
-	spimi_op, unused_rt_op_0x05, unused_rt_op_0x06, unused_rt_op_0x07,
-	tgei_op, tgeiu_op, tlti_op, tltiu_op,
-	teqi_op, unused_0x0d_rt_op, tnei_op, unused_0x0f_rt_op,
-	bltzal_op, bgezal_op, bltzall_op, bgezall_op,
-	rt_op_0x14, rt_op_0x15, rt_op_0x16, rt_op_0x17,
-	rt_op_0x18, rt_op_0x19, rt_op_0x1a, rt_op_0x1b,
-	bposge32_op, rt_op_0x1d, rt_op_0x1e, rt_op_0x1f
-};
-
-/*
- * rs field of cop opcodes.
- */
-enum cop_op {
-	mfc_op        = 0x00, dmfc_op       = 0x01,
-	cfc_op        = 0x02, mtc_op        = 0x04,
-	dmtc_op       = 0x05, ctc_op        = 0x06,
-	bc_op         = 0x08, cop_op        = 0x10,
-	copm_op       = 0x18
-};
-
-/*
- * rt field of cop.bc_op opcodes
- */
-enum bcop_op {
-	bcf_op, bct_op, bcfl_op, bctl_op
-};
-
-/*
- * func field of cop0 coi opcodes.
- */
-enum cop0_coi_func {
-	tlbr_op       = 0x01, tlbwi_op      = 0x02,
-	tlbwr_op      = 0x06, tlbp_op       = 0x08,
-	rfe_op        = 0x10, eret_op       = 0x18
-};
-
-/*
- * func field of cop0 com opcodes.
- */
-enum cop0_com_func {
-	tlbr1_op      = 0x01, tlbw_op       = 0x02,
-	tlbp1_op      = 0x08, dctr_op       = 0x09,
-	dctw_op       = 0x0a
-};
-
-/*
- * fmt field of cop1 opcodes.
- */
-enum cop1_fmt {
-	s_fmt, d_fmt, e_fmt, q_fmt,
-	w_fmt, l_fmt
-};
-
-/*
- * func field of cop1 instructions using d, s or w format.
- */
-enum cop1_sdw_func {
-	fadd_op      =  0x00, fsub_op      =  0x01,
-	fmul_op      =  0x02, fdiv_op      =  0x03,
-	fsqrt_op     =  0x04, fabs_op      =  0x05,
-	fmov_op      =  0x06, fneg_op      =  0x07,
-	froundl_op   =  0x08, ftruncl_op   =  0x09,
-	fceill_op    =  0x0a, ffloorl_op   =  0x0b,
-	fround_op    =  0x0c, ftrunc_op    =  0x0d,
-	fceil_op     =  0x0e, ffloor_op    =  0x0f,
-	fmovc_op     =  0x11, fmovz_op     =  0x12,
-	fmovn_op     =  0x13, frecip_op    =  0x15,
-	frsqrt_op    =  0x16, fcvts_op     =  0x20,
-	fcvtd_op     =  0x21, fcvte_op     =  0x22,
-	fcvtw_op     =  0x24, fcvtl_op     =  0x25,
-	fcmp_op      =  0x30
-};
-
-/*
- * func field of cop1x opcodes (MIPS IV).
- */
-enum cop1x_func {
-	lwxc1_op     =  0x00, ldxc1_op     =  0x01,
-	pfetch_op    =  0x07, swxc1_op     =  0x08,
-	sdxc1_op     =  0x09, madd_s_op    =  0x20,
-	madd_d_op    =  0x21, madd_e_op    =  0x22,
-	msub_s_op    =  0x28, msub_d_op    =  0x29,
-	msub_e_op    =  0x2a, nmadd_s_op   =  0x30,
-	nmadd_d_op   =  0x31, nmadd_e_op   =  0x32,
-	nmsub_s_op   =  0x38, nmsub_d_op   =  0x39,
-	nmsub_e_op   =  0x3a
-};
-
-/*
- * func field for mad opcodes (MIPS IV).
- */
-enum mad_func {
-	madd_fp_op      = 0x08, msub_fp_op      = 0x0a,
-	nmadd_fp_op     = 0x0c, nmsub_fp_op     = 0x0e
-};
-
-/*
- * func field for special3 lx opcodes (Cavium Octeon).
- */
-enum lx_func {
-	lwx_op	= 0x00,
-	lhx_op	= 0x04,
-	lbux_op	= 0x06,
-	ldx_op	= 0x08,
-	lwux_op	= 0x10,
-	lhux_op	= 0x14,
-	lbx_op	= 0x16,
-};
-
-/*
- * Damn ...  bitfields depend from byteorder :-(
- */
-#ifdef __MIPSEB__
-struct j_format {	/* Jump format */
-	unsigned int opcode : 6;
-	unsigned int target : 26;
-};
-
-struct i_format {	/* Immediate format (addi, lw, ...) */
-	unsigned int opcode : 6;
-	unsigned int rs : 5;
-	unsigned int rt : 5;
-	signed int simmediate : 16;
-};
-
-struct u_format {	/* Unsigned immediate format (ori, xori, ...) */
-	unsigned int opcode : 6;
-	unsigned int rs : 5;
-	unsigned int rt : 5;
-	unsigned int uimmediate : 16;
-};
-
-struct c_format {	/* Cache (>= R6000) format */
-	unsigned int opcode : 6;
-	unsigned int rs : 5;
-	unsigned int c_op : 3;
-	unsigned int cache : 2;
-	unsigned int simmediate : 16;
-};
-
-struct r_format {	/* Register format */
-	unsigned int opcode : 6;
-	unsigned int rs : 5;
-	unsigned int rt : 5;
-	unsigned int rd : 5;
-	unsigned int re : 5;
-	unsigned int func : 6;
-};
-
-struct p_format {	/* Performance counter format (R10000) */
-	unsigned int opcode : 6;
-	unsigned int rs : 5;
-	unsigned int rt : 5;
-	unsigned int rd : 5;
-	unsigned int re : 5;
-	unsigned int func : 6;
-};
-
-struct f_format {	/* FPU register format */
-	unsigned int opcode : 6;
-	unsigned int : 1;
-	unsigned int fmt : 4;
-	unsigned int rt : 5;
-	unsigned int rd : 5;
-	unsigned int re : 5;
-	unsigned int func : 6;
-};
-
-struct ma_format {	/* FPU multiply and add format (MIPS IV) */
-	unsigned int opcode : 6;
-	unsigned int fr : 5;
-	unsigned int ft : 5;
-	unsigned int fs : 5;
-	unsigned int fd : 5;
-	unsigned int func : 4;
-	unsigned int fmt : 2;
-};
-
-struct b_format { /* BREAK and SYSCALL */
-	unsigned int opcode:6;
-	unsigned int code:20;
-	unsigned int func:6;
-};
-
-#elif defined(__MIPSEL__)
-
-struct j_format {	/* Jump format */
-	unsigned int target : 26;
-	unsigned int opcode : 6;
-};
-
-struct i_format {	/* Immediate format */
-	signed int simmediate : 16;
-	unsigned int rt : 5;
-	unsigned int rs : 5;
-	unsigned int opcode : 6;
-};
-
-struct u_format {	/* Unsigned immediate format */
-	unsigned int uimmediate : 16;
-	unsigned int rt : 5;
-	unsigned int rs : 5;
-	unsigned int opcode : 6;
-};
-
-struct c_format {	/* Cache (>= R6000) format */
-	unsigned int simmediate : 16;
-	unsigned int cache : 2;
-	unsigned int c_op : 3;
-	unsigned int rs : 5;
-	unsigned int opcode : 6;
-};
-
-struct r_format {	/* Register format */
-	unsigned int func : 6;
-	unsigned int re : 5;
-	unsigned int rd : 5;
-	unsigned int rt : 5;
-	unsigned int rs : 5;
-	unsigned int opcode : 6;
-};
-
-struct p_format {	/* Performance counter format (R10000) */
-	unsigned int func : 6;
-	unsigned int re : 5;
-	unsigned int rd : 5;
-	unsigned int rt : 5;
-	unsigned int rs : 5;
-	unsigned int opcode : 6;
-};
-
-struct f_format {	/* FPU register format */
-	unsigned int func : 6;
-	unsigned int re : 5;
-	unsigned int rd : 5;
-	unsigned int rt : 5;
-	unsigned int fmt : 4;
-	unsigned int : 1;
-	unsigned int opcode : 6;
-};
-
-struct ma_format {	/* FPU multiply and add format (MIPS IV) */
-	unsigned int fmt : 2;
-	unsigned int func : 4;
-	unsigned int fd : 5;
-	unsigned int fs : 5;
-	unsigned int ft : 5;
-	unsigned int fr : 5;
-	unsigned int opcode : 6;
-};
-
-struct b_format { /* BREAK and SYSCALL */
-	unsigned int func:6;
-	unsigned int code:20;
-	unsigned int opcode:6;
-};
-
-#else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */
-#error "MIPS but neither __MIPSEL__ nor __MIPSEB__?"
-#endif
-
-union mips_instruction {
-	unsigned int word;
-	unsigned short halfword[2];
-	unsigned char byte[4];
-	struct j_format j_format;
-	struct i_format i_format;
-	struct u_format u_format;
-	struct c_format c_format;
-	struct r_format r_format;
-	struct p_format p_format;
-	struct f_format f_format;
-	struct ma_format ma_format;
-	struct b_format b_format;
-};
+#include <uapi/asm/inst.h>
 
 /* HACHACHAHCAHC ...  */
 
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index ff2e034..1be1372 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -7,7 +7,7 @@
  * Copyright (C) 1994 - 2000, 06 Ralf Baechle
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  * Copyright (C) 2004, 2005  MIPS Technologies, Inc.  All rights reserved.
- *	Author:	Maciej W. Rozycki <macro@mips.com>
+ *	Author: Maciej W. Rozycki <macro@mips.com>
  */
 #ifndef _ASM_IO_H
 #define _ASM_IO_H
@@ -253,9 +253,9 @@
 	__ioremap_mode((offset), (size), _CACHE_UNCACHED)
 
 /*
- * ioremap_cachable -   map bus memory into CPU space
- * @offset:         bus address of the memory
- * @size:           size of the resource to map
+ * ioremap_cachable -	map bus memory into CPU space
+ * @offset:	    bus address of the memory
+ * @size:	    size of the resource to map
  *
  * ioremap_nocache performs a platform specific sequence of operations to
  * make bus memory CPU accessible via the readb/readw/readl/writeb/
@@ -264,14 +264,14 @@
  * address.
  *
  * This version of ioremap ensures that the memory is marked cachable by
- * the CPU.  Also enables full write-combining.  Useful for some
+ * the CPU.  Also enables full write-combining.	 Useful for some
  * memory-like regions on I/O busses.
  */
 #define ioremap_cachable(offset, size)					\
 	__ioremap_mode((offset), (size), _page_cachable_default)
 
 /*
- * These two are MIPS specific ioremap variant.  ioremap_cacheable_cow
+ * These two are MIPS specific ioremap variant.	 ioremap_cacheable_cow
  * requests a cachable mapping, ioremap_uncached_accelerated requests a
  * mapping using the uncached accelerated mode which isn't supported on
  * all processors.
@@ -298,7 +298,7 @@
 }
 
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
-#define war_octeon_io_reorder_wmb()  		wmb()
+#define war_octeon_io_reorder_wmb()		wmb()
 #else
 #define war_octeon_io_reorder_wmb()		do { } while (0)
 #endif
@@ -317,7 +317,7 @@
 									\
 	__val = pfx##ioswab##bwlq(__mem, val);				\
 									\
-	if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long))	\
+	if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
 		*__mem = __val;						\
 	else if (cpu_has_64bits) {					\
 		unsigned long __flags;					\
@@ -327,9 +327,9 @@
 			local_irq_save(__flags);			\
 		__asm__ __volatile__(					\
 			".set	mips3"		"\t\t# __writeq""\n\t"	\
-			"dsll32	%L0, %L0, 0"			"\n\t"	\
-			"dsrl32	%L0, %L0, 0"			"\n\t"	\
-			"dsll32	%M0, %M0, 0"			"\n\t"	\
+			"dsll32 %L0, %L0, 0"			"\n\t"	\
+			"dsrl32 %L0, %L0, 0"			"\n\t"	\
+			"dsll32 %M0, %M0, 0"			"\n\t"	\
 			"or	%L0, %L0, %M0"			"\n\t"	\
 			"sd	%L0, %2"			"\n\t"	\
 			".set	mips0"				"\n"	\
@@ -348,7 +348,7 @@
 									\
 	__mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));	\
 									\
-	if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long))	\
+	if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
 		__val = *__mem;						\
 	else if (cpu_has_64bits) {					\
 		unsigned long __flags;					\
@@ -356,9 +356,9 @@
 		if (irq)						\
 			local_irq_save(__flags);			\
 		__asm__ __volatile__(					\
-			".set	mips3"		"\t\t# __readq"	"\n\t"	\
+			".set	mips3"		"\t\t# __readq" "\n\t"	\
 			"ld	%L0, %1"			"\n\t"	\
-			"dsra32	%M0, %L0, 0"			"\n\t"	\
+			"dsra32 %M0, %L0, 0"			"\n\t"	\
 			"sll	%L0, %L0, 0"			"\n\t"	\
 			".set	mips0"				"\n"	\
 			: "=r" (__val)					\
@@ -586,7 +586,7 @@
 
 #else /* Sane hardware */
 
-#define dma_cache_wback_inv(start,size)	\
+#define dma_cache_wback_inv(start,size) \
 	do { (void) (start); (void) (size); } while (0)
 #define dma_cache_wback(start,size)	\
 	do { (void) (start); (void) (size); } while (0)
diff --git a/arch/mips/include/asm/ip32/crime.h b/arch/mips/include/asm/ip32/crime.h
index 7c36b0e..16c94a2 100644
--- a/arch/mips/include/asm/ip32/crime.h
+++ b/arch/mips/include/asm/ip32/crime.h
@@ -74,7 +74,7 @@
 #define CRIME_RE_IDLE_E_INT		BIT(24)
 #define CRIME_RE_EMPTY_L_INT		BIT(25)
 #define CRIME_RE_FULL_L_INT		BIT(26)
-#define CRIME_RE_IDLE_L_INT    		BIT(27)
+#define CRIME_RE_IDLE_L_INT		BIT(27)
 #define CRIME_SOFT0_INT			BIT(28)
 #define CRIME_SOFT1_INT			BIT(29)
 #define CRIME_SOFT2_INT			BIT(30)
@@ -118,7 +118,7 @@
 #define CRIME_MEM_REF_COUNTER_MASK	0x3ff		/* 10bit */
 
 	volatile unsigned long mem_error_stat;
-#define CRIME_MEM_ERROR_STAT_MASK       0x0ff7ffff	/* 28-bit register */
+#define CRIME_MEM_ERROR_STAT_MASK	0x0ff7ffff	/* 28-bit register */
 #define CRIME_MEM_ERROR_MACE_ID		0x0000007f
 #define CRIME_MEM_ERROR_MACE_ACCESS	0x00000080
 #define CRIME_MEM_ERROR_RE_ID		0x00007f00
@@ -134,8 +134,8 @@
 #define CRIME_MEM_ERROR_MEM_ECC_RD	0x00800000
 #define CRIME_MEM_ERROR_MEM_ECC_RMW	0x01000000
 #define CRIME_MEM_ERROR_INV		0x0e000000
-#define CRIME_MEM_ERROR_INV_MEM_ADDR_RD	0x02000000
-#define CRIME_MEM_ERROR_INV_MEM_ADDR_WR	0x04000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_RD 0x02000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_WR 0x04000000
 #define CRIME_MEM_ERROR_INV_MEM_ADDR_RMW 0x08000000
 
 	volatile unsigned long mem_error_addr;
diff --git a/arch/mips/include/asm/ip32/ip32_ints.h b/arch/mips/include/asm/ip32/ip32_ints.h
index 85bc530..72e3368 100644
--- a/arch/mips/include/asm/ip32/ip32_ints.h
+++ b/arch/mips/include/asm/ip32/ip32_ints.h
@@ -13,7 +13,7 @@
 
 /*
  * This list reflects the assignment of interrupt numbers to
- * interrupting events.  Order is fairly irrelevant to handling
+ * interrupting events.	 Order is fairly irrelevant to handling
  * priority.  This differs from irix.
  */
 
diff --git a/arch/mips/include/asm/ip32/mace.h b/arch/mips/include/asm/ip32/mace.h
index c523123..253ed7e 100644
--- a/arch/mips/include/asm/ip32/mace.h
+++ b/arch/mips/include/asm/ip32/mace.h
@@ -250,12 +250,12 @@
  * -> drivers/i2c/algos/i2c-algo-sgi.c */
 struct mace_i2c {
 	volatile unsigned long config;
-#define MACEI2C_RESET           BIT(0)
-#define MACEI2C_FAST            BIT(1)
-#define MACEI2C_DATA_OVERRIDE   BIT(2)
-#define MACEI2C_CLOCK_OVERRIDE  BIT(3)
-#define MACEI2C_DATA_STATUS     BIT(4)
-#define MACEI2C_CLOCK_STATUS    BIT(5)
+#define MACEI2C_RESET		BIT(0)
+#define MACEI2C_FAST		BIT(1)
+#define MACEI2C_DATA_OVERRIDE	BIT(2)
+#define MACEI2C_CLOCK_OVERRIDE	BIT(3)
+#define MACEI2C_DATA_STATUS	BIT(4)
+#define MACEI2C_CLOCK_STATUS	BIT(5)
 	volatile unsigned long control;
 	volatile unsigned long data;
 };
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index 78dbb8a..7bc2cdb 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -32,7 +32,7 @@
 
 extern unsigned long irq_hwmask[];
 extern int setup_irq_smtc(unsigned int irq, struct irqaction * new,
-                          unsigned long hwmask);
+			  unsigned long hwmask);
 
 static inline void smtc_im_ack_irq(unsigned int irq)
 {
@@ -60,7 +60,7 @@
  * if option is enabled.
  *
  * Up through Linux 2.6.22 (at least) cpumask operations are very
- * inefficient on MIPS.  Initial prototypes of SMTC IRQ affinity
+ * inefficient on MIPS.	 Initial prototypes of SMTC IRQ affinity
  * used a "fast path" per-IRQ-descriptor cache of affinity information
  * to reduce latency.  As there is a project afoot to optimize the
  * cpumask implementations, this version is optimistically assuming
@@ -133,7 +133,7 @@
 
 /*
  * Before R2 the timer and performance counter interrupts were both fixed to
- * IE7.  Since R2 their number has to be read from the c0_intctl register.
+ * IE7.	 Since R2 their number has to be read from the c0_intctl register.
  */
 #define CP0_LEGACY_COMPARE_IRQ 7
 #define CP0_LEGACY_PERFCNT_IRQ 7
diff --git a/arch/mips/include/asm/irq_cpu.h b/arch/mips/include/asm/irq_cpu.h
index ef6a07c..3f11fdb 100644
--- a/arch/mips/include/asm/irq_cpu.h
+++ b/arch/mips/include/asm/irq_cpu.h
@@ -17,4 +17,10 @@
 extern void rm7k_cpu_irq_init(void);
 extern void rm9k_cpu_irq_init(void);
 
+#ifdef CONFIG_IRQ_DOMAIN
+struct device_node;
+extern int mips_cpu_intc_init(struct device_node *of_node,
+			      struct device_node *parent);
+#endif
+
 #endif /* _ASM_IRQ_CPU_H */
diff --git a/arch/mips/include/asm/isadep.h b/arch/mips/include/asm/isadep.h
index 24c6cda..b4af6eb 100644
--- a/arch/mips/include/asm/isadep.h
+++ b/arch/mips/include/asm/isadep.h
@@ -18,7 +18,7 @@
  * kernel or user mode? (CP0_STATUS)
  */
 #define KU_MASK 0x08
-#define	KU_USER 0x08
+#define KU_USER 0x08
 #define KU_KERN 0x00
 
 #else
@@ -26,7 +26,7 @@
  * kernel or user mode?
  */
 #define KU_MASK 0x18
-#define	KU_USER 0x10
+#define KU_USER 0x10
 #define KU_KERN 0x00
 
 #endif
diff --git a/arch/mips/include/asm/jazz.h b/arch/mips/include/asm/jazz.h
index 83f449d..a61970d 100644
--- a/arch/mips/include/asm/jazz.h
+++ b/arch/mips/include/asm/jazz.h
@@ -16,7 +16,7 @@
  * instead of 0xe0000000.
  */
 
-#define JAZZ_LOCAL_IO_SPACE     0xe0000000
+#define JAZZ_LOCAL_IO_SPACE	0xe0000000
 
 /*
  * Revision numbers in PICA_ASIC_REVISION
@@ -25,24 +25,24 @@
  * 0xf0000001 - Rev2
  * 0xf0000002 - Rev3
  */
-#define PICA_ASIC_REVISION      0xe0000008
+#define PICA_ASIC_REVISION	0xe0000008
 
 /*
  * The segments of the seven segment LED are mapped
  * to the control bits as follows:
  *
- *         (7)
- *      ---------
- *      |       |
- *  (2) |       | (6)
- *      |  (1)  |
- *      ---------
- *      |       |
- *  (3) |       | (5)
- *      |  (4)  |
- *      --------- . (0)
+ *	   (7)
+ *	---------
+ *	|	|
+ *  (2) |	| (6)
+ *	|  (1)	|
+ *	---------
+ *	|	|
+ *  (3) |	| (5)
+ *	|  (4)	|
+ *	--------- . (0)
  */
-#define PICA_LED                0xe000f000
+#define PICA_LED		0xe000f000
 
 /*
  * Some characters for the LED control registers
@@ -51,24 +51,24 @@
  * control each of the seven segments and the dot independently.
  * It's only a toy, anyway...
  */
-#define LED_DOT                 0x01
-#define LED_SPACE               0x00
-#define LED_0                   0xfc
-#define LED_1                   0x60
-#define LED_2                   0xda
-#define LED_3                   0xf2
-#define LED_4                   0x66
-#define LED_5                   0xb6
-#define LED_6                   0xbe
-#define LED_7                   0xe0
-#define LED_8                   0xfe
-#define LED_9                   0xf6
-#define LED_A                   0xee
-#define LED_b                   0x3e
-#define LED_C                   0x9c
-#define LED_d                   0x7a
-#define LED_E                   0x9e
-#define LED_F                   0x8e
+#define LED_DOT			0x01
+#define LED_SPACE		0x00
+#define LED_0			0xfc
+#define LED_1			0x60
+#define LED_2			0xda
+#define LED_3			0xf2
+#define LED_4			0x66
+#define LED_5			0xb6
+#define LED_6			0xbe
+#define LED_7			0xe0
+#define LED_8			0xfe
+#define LED_9			0xf6
+#define LED_A			0xee
+#define LED_b			0x3e
+#define LED_C			0x9c
+#define LED_d			0x7a
+#define LED_E			0x9e
+#define LED_F			0x8e
 
 #ifndef __ASSEMBLY__
 
@@ -96,9 +96,9 @@
  * This address is just a guess and seems to differ from
  * other mips machines such as RC3xxx...
  */
-#define JAZZ_KEYBOARD_ADDRESS   0xe0005000
-#define JAZZ_KEYBOARD_DATA      0xe0005000
-#define JAZZ_KEYBOARD_COMMAND   0xe0005001
+#define JAZZ_KEYBOARD_ADDRESS	0xe0005000
+#define JAZZ_KEYBOARD_DATA	0xe0005000
+#define JAZZ_KEYBOARD_COMMAND	0xe0005001
 
 #ifndef __ASSEMBLY__
 
@@ -119,28 +119,28 @@
 /*
  * For now. Needs to be changed for RC3xxx support. See below.
  */
-#define keyboard_hardware       jazz_keyboard_hardware
+#define keyboard_hardware	jazz_keyboard_hardware
 
 #endif /* !__ASSEMBLY__ */
 
 /*
  * i8042 keyboard controller for most other Mips machines.
  */
-#define MIPS_KEYBOARD_ADDRESS   0xb9005000
-#define MIPS_KEYBOARD_DATA      0xb9005003
-#define MIPS_KEYBOARD_COMMAND   0xb9005007
+#define MIPS_KEYBOARD_ADDRESS	0xb9005000
+#define MIPS_KEYBOARD_DATA	0xb9005003
+#define MIPS_KEYBOARD_COMMAND	0xb9005007
 
 /*
  * Serial and parallel ports (WD 16C552) on the Mips JAZZ
  */
-#define JAZZ_SERIAL1_BASE       (unsigned int)0xe0006000
-#define JAZZ_SERIAL2_BASE       (unsigned int)0xe0007000
-#define JAZZ_PARALLEL_BASE      (unsigned int)0xe0008000
+#define JAZZ_SERIAL1_BASE	(unsigned int)0xe0006000
+#define JAZZ_SERIAL2_BASE	(unsigned int)0xe0007000
+#define JAZZ_PARALLEL_BASE	(unsigned int)0xe0008000
 
 /*
  * Dummy Device Address. Used in jazzdma.c
  */
-#define JAZZ_DUMMY_DEVICE       0xe000d000
+#define JAZZ_DUMMY_DEVICE	0xe000d000
 
 /*
  * JAZZ timer registers and interrupt no.
@@ -148,8 +148,8 @@
  * cpu level 6, but to keep compatibility with PC stuff
  * it is remapped to vector 0. See arch/mips/kernel/entry.S.
  */
-#define JAZZ_TIMER_INTERVAL     0xe0000228
-#define JAZZ_TIMER_REGISTER     0xe0000230
+#define JAZZ_TIMER_INTERVAL	0xe0000228
+#define JAZZ_TIMER_REGISTER	0xe0000230
 
 /*
  * DRAM configuration register
@@ -176,13 +176,13 @@
 #endif
 #endif /* !__ASSEMBLY__ */
 
-#define PICA_DRAM_CONFIG        0xe00fffe0
+#define PICA_DRAM_CONFIG	0xe00fffe0
 
 /*
  * JAZZ interrupt control registers
  */
-#define JAZZ_IO_IRQ_SOURCE      0xe0010000
-#define JAZZ_IO_IRQ_ENABLE      0xe0010002
+#define JAZZ_IO_IRQ_SOURCE	0xe0010000
+#define JAZZ_IO_IRQ_ENABLE	0xe0010002
 
 /*
  * JAZZ Interrupt Level definitions
@@ -190,20 +190,20 @@
  * This is somewhat broken.  For reasons which nobody can remember anymore
  * we remap the Jazz interrupts to the usual ISA style interrupt numbers.
  */
-#define JAZZ_IRQ_START          24
-#define JAZZ_IRQ_END            (24 + 9)
-#define JAZZ_PARALLEL_IRQ       (JAZZ_IRQ_START + 0)
-#define JAZZ_FLOPPY_IRQ         (JAZZ_IRQ_START + 1)
-#define JAZZ_SOUND_IRQ          (JAZZ_IRQ_START + 2)
-#define JAZZ_VIDEO_IRQ          (JAZZ_IRQ_START + 3)
-#define JAZZ_ETHERNET_IRQ       (JAZZ_IRQ_START + 4)
-#define JAZZ_SCSI_IRQ           (JAZZ_IRQ_START + 5)
-#define JAZZ_KEYBOARD_IRQ       (JAZZ_IRQ_START + 6)
-#define JAZZ_MOUSE_IRQ          (JAZZ_IRQ_START + 7)
-#define JAZZ_SERIAL1_IRQ        (JAZZ_IRQ_START + 8)
-#define JAZZ_SERIAL2_IRQ        (JAZZ_IRQ_START + 9)
+#define JAZZ_IRQ_START		24
+#define JAZZ_IRQ_END		(24 + 9)
+#define JAZZ_PARALLEL_IRQ	(JAZZ_IRQ_START + 0)
+#define JAZZ_FLOPPY_IRQ		(JAZZ_IRQ_START + 1)
+#define JAZZ_SOUND_IRQ		(JAZZ_IRQ_START + 2)
+#define JAZZ_VIDEO_IRQ		(JAZZ_IRQ_START + 3)
+#define JAZZ_ETHERNET_IRQ	(JAZZ_IRQ_START + 4)
+#define JAZZ_SCSI_IRQ		(JAZZ_IRQ_START + 5)
+#define JAZZ_KEYBOARD_IRQ	(JAZZ_IRQ_START + 6)
+#define JAZZ_MOUSE_IRQ		(JAZZ_IRQ_START + 7)
+#define JAZZ_SERIAL1_IRQ	(JAZZ_IRQ_START + 8)
+#define JAZZ_SERIAL2_IRQ	(JAZZ_IRQ_START + 9)
 
-#define JAZZ_TIMER_IRQ          (MIPS_CPU_IRQ_BASE+6)
+#define JAZZ_TIMER_IRQ		(MIPS_CPU_IRQ_BASE+6)
 
 
 /*
@@ -211,46 +211,46 @@
  * Note: Channels 4...7 are not used with respect to the Acer PICA-61
  * chipset which does not provide these DMA channels.
  */
-#define JAZZ_SCSI_DMA           0              /* SCSI */
-#define JAZZ_FLOPPY_DMA         1              /* FLOPPY */
-#define JAZZ_AUDIOL_DMA         2              /* AUDIO L */
-#define JAZZ_AUDIOR_DMA         3              /* AUDIO R */
+#define JAZZ_SCSI_DMA		0	       /* SCSI */
+#define JAZZ_FLOPPY_DMA		1	       /* FLOPPY */
+#define JAZZ_AUDIOL_DMA		2	       /* AUDIO L */
+#define JAZZ_AUDIOR_DMA		3	       /* AUDIO R */
 
 /*
  * JAZZ R4030 MCT_ADR chip (DMA controller)
  * Note: Virtual Addresses !
  */
 #define JAZZ_R4030_CONFIG	0xE0000000	/* R4030 config register */
-#define JAZZ_R4030_REVISION     0xE0000008	/* same as PICA_ASIC_REVISION */
+#define JAZZ_R4030_REVISION	0xE0000008	/* same as PICA_ASIC_REVISION */
 #define JAZZ_R4030_INV_ADDR	0xE0000010	/* Invalid Address register */
 
-#define JAZZ_R4030_TRSTBL_BASE  0xE0000018	/* Translation Table Base */
-#define JAZZ_R4030_TRSTBL_LIM   0xE0000020	/* Translation Table Limit */
-#define JAZZ_R4030_TRSTBL_INV   0xE0000028	/* Translation Table Invalidate */
+#define JAZZ_R4030_TRSTBL_BASE	0xE0000018	/* Translation Table Base */
+#define JAZZ_R4030_TRSTBL_LIM	0xE0000020	/* Translation Table Limit */
+#define JAZZ_R4030_TRSTBL_INV	0xE0000028	/* Translation Table Invalidate */
 
-#define JAZZ_R4030_CACHE_MTNC   0xE0000030	/* Cache Maintenance */
-#define JAZZ_R4030_R_FAIL_ADDR  0xE0000038	/* Remote Failed Address */
-#define JAZZ_R4030_M_FAIL_ADDR  0xE0000040	/* Memory Failed Address */
+#define JAZZ_R4030_CACHE_MTNC	0xE0000030	/* Cache Maintenance */
+#define JAZZ_R4030_R_FAIL_ADDR	0xE0000038	/* Remote Failed Address */
+#define JAZZ_R4030_M_FAIL_ADDR	0xE0000040	/* Memory Failed Address */
 
-#define JAZZ_R4030_CACHE_PTAG   0xE0000048	/* I/O Cache Physical Tag */
-#define JAZZ_R4030_CACHE_LTAG   0xE0000050	/* I/O Cache Logical Tag */
-#define JAZZ_R4030_CACHE_BMASK  0xE0000058	/* I/O Cache Byte Mask */
-#define JAZZ_R4030_CACHE_BWIN   0xE0000060	/* I/O Cache Buffer Window */
+#define JAZZ_R4030_CACHE_PTAG	0xE0000048	/* I/O Cache Physical Tag */
+#define JAZZ_R4030_CACHE_LTAG	0xE0000050	/* I/O Cache Logical Tag */
+#define JAZZ_R4030_CACHE_BMASK	0xE0000058	/* I/O Cache Byte Mask */
+#define JAZZ_R4030_CACHE_BWIN	0xE0000060	/* I/O Cache Buffer Window */
 
 /*
  * Remote Speed Registers.
  *
- *  0: free,      1: Ethernet,  2: SCSI,      3: Floppy,
- *  4: RTC,       5: Kb./Mouse  6: serial 1,  7: serial 2,
- *  8: parallel,  9: NVRAM,    10: CPU,      11: PROM,
+ *  0: free,	  1: Ethernet,	2: SCSI,      3: Floppy,
+ *  4: RTC,	  5: Kb./Mouse	6: serial 1,  7: serial 2,
+ *  8: parallel,  9: NVRAM,    10: CPU,	     11: PROM,
  * 12: reserved, 13: free,     14: 7seg LED, 15: ???
  */
 #define JAZZ_R4030_REM_SPEED	0xE0000070	/* 16 Remote Speed Registers */
 						/* 0xE0000070,78,80... 0xE00000E8 */
-#define JAZZ_R4030_IRQ_ENABLE   0xE00000E8	/* Internal Interrupt Enable */
-#define JAZZ_R4030_INVAL_ADDR   0xE0000010	/* Invalid address Register */
-#define JAZZ_R4030_IRQ_SOURCE   0xE0000200	/* Interrupt Source Register */
-#define JAZZ_R4030_I386_ERROR   0xE0000208	/* i386/EISA Bus Error */
+#define JAZZ_R4030_IRQ_ENABLE	0xE00000E8	/* Internal Interrupt Enable */
+#define JAZZ_R4030_INVAL_ADDR	0xE0000010	/* Invalid address Register */
+#define JAZZ_R4030_IRQ_SOURCE	0xE0000200	/* Interrupt Source Register */
+#define JAZZ_R4030_I386_ERROR	0xE0000208	/* i386/EISA Bus Error */
 
 /*
  * Virtual (E)ISA controller address
diff --git a/arch/mips/include/asm/jazzdma.h b/arch/mips/include/asm/jazzdma.h
index 8bb37bb..2cefc3c 100644
--- a/arch/mips/include/asm/jazzdma.h
+++ b/arch/mips/include/asm/jazzdma.h
@@ -10,7 +10,7 @@
 extern unsigned long vdma_alloc(unsigned long paddr, unsigned long size);
 extern int vdma_free(unsigned long laddr);
 extern int vdma_remap(unsigned long laddr, unsigned long paddr,
-                      unsigned long size);
+		      unsigned long size);
 extern unsigned long vdma_phys2log(unsigned long paddr);
 extern unsigned long vdma_log2phys(unsigned long laddr);
 extern void vdma_stats(void);		/* for debugging only */
@@ -35,14 +35,14 @@
  * Macros to get page no. and offset of a given address
  * Note that VDMA_PAGE() works for physical addresses only
  */
-#define VDMA_PAGE(a)            ((unsigned int)(a) >> 12)
-#define VDMA_OFFSET(a)          ((unsigned int)(a) & (VDMA_PAGESIZE-1))
+#define VDMA_PAGE(a)		((unsigned int)(a) >> 12)
+#define VDMA_OFFSET(a)		((unsigned int)(a) & (VDMA_PAGESIZE-1))
 
 /*
  * error code returned by vdma_alloc()
  * (See also arch/mips/kernel/jazzdma.c)
  */
-#define VDMA_ERROR              0xffffffff
+#define VDMA_ERROR		0xffffffff
 
 /*
  * VDMA pagetable entry description
@@ -59,37 +59,37 @@
  */
 #define JAZZ_R4030_CHNL_MODE	0xE0000100	/* 8 DMA Channel Mode Registers, */
 						/* 0xE0000100,120,140... */
-#define JAZZ_R4030_CHNL_ENABLE  0xE0000108	/* 8 DMA Channel Enable Regs, */
+#define JAZZ_R4030_CHNL_ENABLE	0xE0000108	/* 8 DMA Channel Enable Regs, */
 						/* 0xE0000108,128,148... */
-#define JAZZ_R4030_CHNL_COUNT   0xE0000110	/* 8 DMA Channel Byte Cnt Regs, */
+#define JAZZ_R4030_CHNL_COUNT	0xE0000110	/* 8 DMA Channel Byte Cnt Regs, */
 						/* 0xE0000110,130,150... */
 #define JAZZ_R4030_CHNL_ADDR	0xE0000118	/* 8 DMA Channel Address Regs, */
 						/* 0xE0000118,138,158... */
 
 /* channel enable register bits */
 
-#define R4030_CHNL_ENABLE        (1<<0)
-#define R4030_CHNL_WRITE         (1<<1)
-#define R4030_TC_INTR            (1<<8)
-#define R4030_MEM_INTR           (1<<9)
-#define R4030_ADDR_INTR          (1<<10)
+#define R4030_CHNL_ENABLE	 (1<<0)
+#define R4030_CHNL_WRITE	 (1<<1)
+#define R4030_TC_INTR		 (1<<8)
+#define R4030_MEM_INTR		 (1<<9)
+#define R4030_ADDR_INTR		 (1<<10)
 
 /*
  * Channel mode register bits
  */
-#define R4030_MODE_ATIME_40      (0) /* device access time on remote bus */
-#define R4030_MODE_ATIME_80      (1)
-#define R4030_MODE_ATIME_120     (2)
-#define R4030_MODE_ATIME_160     (3)
-#define R4030_MODE_ATIME_200     (4)
-#define R4030_MODE_ATIME_240     (5)
-#define R4030_MODE_ATIME_280     (6)
-#define R4030_MODE_ATIME_320     (7)
-#define R4030_MODE_WIDTH_8       (1<<3)	/* device data bus width */
-#define R4030_MODE_WIDTH_16      (2<<3)
-#define R4030_MODE_WIDTH_32      (3<<3)
-#define R4030_MODE_INTR_EN       (1<<5)
-#define R4030_MODE_BURST         (1<<6)	/* Rev. 2 only */
-#define R4030_MODE_FAST_ACK      (1<<7)	/* Rev. 2 only */
+#define R4030_MODE_ATIME_40	 (0) /* device access time on remote bus */
+#define R4030_MODE_ATIME_80	 (1)
+#define R4030_MODE_ATIME_120	 (2)
+#define R4030_MODE_ATIME_160	 (3)
+#define R4030_MODE_ATIME_200	 (4)
+#define R4030_MODE_ATIME_240	 (5)
+#define R4030_MODE_ATIME_280	 (6)
+#define R4030_MODE_ATIME_320	 (7)
+#define R4030_MODE_WIDTH_8	 (1<<3) /* device data bus width */
+#define R4030_MODE_WIDTH_16	 (2<<3)
+#define R4030_MODE_WIDTH_32	 (3<<3)
+#define R4030_MODE_INTR_EN	 (1<<5)
+#define R4030_MODE_BURST	 (1<<6) /* Rev. 2 only */
+#define R4030_MODE_FAST_ACK	 (1<<7) /* Rev. 2 only */
 
 #endif /* _ASM_JAZZDMA_H */
diff --git a/arch/mips/include/asm/kmap_types.h b/arch/mips/include/asm/kmap_types.h
index 58e91ed..c1909dc 100644
--- a/arch/mips/include/asm/kmap_types.h
+++ b/arch/mips/include/asm/kmap_types.h
@@ -2,7 +2,7 @@
 #define _ASM_KMAP_TYPES_H
 
 #ifdef CONFIG_DEBUG_HIGHMEM
-#define  __WITH_KM_FENCE
+#define	 __WITH_KM_FENCE
 #endif
 
 #include <asm-generic/kmap_types.h>
diff --git a/arch/mips/include/asm/kprobes.h b/arch/mips/include/asm/kprobes.h
index 1fbbca0..daba1f9 100644
--- a/arch/mips/include/asm/kprobes.h
+++ b/arch/mips/include/asm/kprobes.h
@@ -29,7 +29,7 @@
 #include <asm/kdebug.h>
 #include <asm/inst.h>
 
-#define  __ARCH_WANT_KPROBES_INSN_SLOT
+#define	 __ARCH_WANT_KPROBES_INSN_SLOT
 
 struct kprobe;
 struct pt_regs;
diff --git a/arch/mips/include/asm/lasat/eeprom.h b/arch/mips/include/asm/lasat/eeprom.h
index 3dac2036..d918b82 100644
--- a/arch/mips/include/asm/lasat/eeprom.h
+++ b/arch/mips/include/asm/lasat/eeprom.h
@@ -1,12 +1,12 @@
 #include <asm/addrspace.h>
 
 /* lasat 100 */
-#define AT93C_REG_100               KSEG1ADDR(0x1c810000)
-#define AT93C_RDATA_REG_100         AT93C_REG_100
-#define AT93C_RDATA_SHIFT_100       4
-#define AT93C_WDATA_SHIFT_100       4
-#define AT93C_CS_M_100              (1 << 5)
-#define AT93C_CLK_M_100             (1 << 3)
+#define AT93C_REG_100		    KSEG1ADDR(0x1c810000)
+#define AT93C_RDATA_REG_100	    AT93C_REG_100
+#define AT93C_RDATA_SHIFT_100	    4
+#define AT93C_WDATA_SHIFT_100	    4
+#define AT93C_CS_M_100		    (1 << 5)
+#define AT93C_CLK_M_100		    (1 << 3)
 
 /* lasat 200 */
 #define AT93C_REG_200		KSEG1ADDR(0x11000000)
diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h
index e8ff70f8..9e32b4d 100644
--- a/arch/mips/include/asm/lasat/lasat.h
+++ b/arch/mips/include/asm/lasat/lasat.h
@@ -100,7 +100,7 @@
 
 /* Configuration descriptor encoding - see the doc for details */
 
-#define LASAT_W0_DSCTYPE(v)		(((v))         & 0xf)
+#define LASAT_W0_DSCTYPE(v)		(((v))	       & 0xf)
 #define LASAT_W0_BMID(v)		(((v) >> 0x04) & 0xf)
 #define LASAT_W0_CPUTYPE(v)		(((v) >> 0x08) & 0xf)
 #define LASAT_W0_BUSSPEED(v)		(((v) >> 0x0c) & 0xf)
@@ -109,7 +109,7 @@
 #define LASAT_W0_SDRAMBANKS(v)		(((v) >> 0x18) & 0xf)
 #define LASAT_W0_L2CACHE(v)		(((v) >> 0x1c) & 0xf)
 
-#define LASAT_W1_EDHAC(v)		(((v))         & 0xf)
+#define LASAT_W1_EDHAC(v)		(((v))	       & 0xf)
 #define LASAT_W1_HIFN(v)		(((v) >> 0x04) & 0x1)
 #define LASAT_W1_ISDN(v)		(((v) >> 0x05) & 0x1)
 #define LASAT_W1_IDE(v)			(((v) >> 0x06) & 0x1)
@@ -239,7 +239,7 @@
 	__delay(ns / lasat_ndelay_divider);
 }
 
-#define IS_LASAT_200()     (current_cpu_data.cputype == CPU_R5000)
+#define IS_LASAT_200()	   (current_cpu_data.cputype == CPU_R5000)
 
 #endif /* !defined (_LANGUAGE_ASSEMBLY) */
 
@@ -247,11 +247,11 @@
 #define LASAT_SERVICEMODE_MAGIC_2     0xfedeabba
 
 /* Lasat 100 boards */
-#define LASAT_GT_BASE           (KSEG1ADDR(0x14000000))
+#define LASAT_GT_BASE		(KSEG1ADDR(0x14000000))
 
 /* Lasat 200 boards */
-#define Vrc5074_PHYS_BASE       0x1fa00000
-#define Vrc5074_BASE            (KSEG1ADDR(Vrc5074_PHYS_BASE))
-#define PCI_WINDOW1             0x1a000000
+#define Vrc5074_PHYS_BASE	0x1fa00000
+#define Vrc5074_BASE		(KSEG1ADDR(Vrc5074_PHYS_BASE))
+#define PCI_WINDOW1		0x1a000000
 
 #endif /* _LASAT_H */
diff --git a/arch/mips/include/asm/lasat/serial.h b/arch/mips/include/asm/lasat/serial.h
index 1c37d70..a2f6c7a 100644
--- a/arch/mips/include/asm/lasat/serial.h
+++ b/arch/mips/include/asm/lasat/serial.h
@@ -1,7 +1,7 @@
 #include <asm/lasat/lasat.h>
 
 /* Lasat 100 boards serial configuration */
-#define LASAT_BASE_BAUD_100 		(7372800 / 16)
+#define LASAT_BASE_BAUD_100		(7372800 / 16)
 #define LASAT_UART_REGS_BASE_100	0x1c8b0000
 #define LASAT_UART_REGS_SHIFT_100	2
 #define LASATINT_UART_100		16
diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h
index 94fde8d..d44622c 100644
--- a/arch/mips/include/asm/local.h
+++ b/arch/mips/include/asm/local.h
@@ -15,10 +15,10 @@
 #define LOCAL_INIT(i)	{ ATOMIC_LONG_INIT(i) }
 
 #define local_read(l)	atomic_long_read(&(l)->a)
-#define local_set(l, i)	atomic_long_set(&(l)->a, (i))
+#define local_set(l, i) atomic_long_set(&(l)->a, (i))
 
-#define local_add(i, l)	atomic_long_add((i), (&(l)->a))
-#define local_sub(i, l)	atomic_long_sub((i), (&(l)->a))
+#define local_add(i, l) atomic_long_add((i), (&(l)->a))
+#define local_sub(i, l) atomic_long_sub((i), (&(l)->a))
 #define local_inc(l)	atomic_long_inc(&(l)->a)
 #define local_dec(l)	atomic_long_dec(&(l)->a)
 
diff --git a/arch/mips/include/asm/m48t37.h b/arch/mips/include/asm/m48t37.h
index cabf862..e6eaf53 100644
--- a/arch/mips/include/asm/m48t37.h
+++ b/arch/mips/include/asm/m48t37.h
@@ -9,7 +9,7 @@
 extern spinlock_t rtc_lock;
 
 struct m48t37_rtc {
-	volatile u8	pad[0x7ff0];    /* NVRAM */
+	volatile u8	pad[0x7ff0];	/* NVRAM */
 	volatile u8	flags;
 	volatile u8	century;
 	volatile u8	alarm_sec;
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
index 07d3fad..a47ea0c 100644
--- a/arch/mips/include/asm/mach-ar7/ar7.h
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -40,9 +40,9 @@
 #define AR7_REGS_USB	(AR7_REGS_BASE + 0x1200)
 #define AR7_REGS_RESET	(AR7_REGS_BASE + 0x1600)
 #define AR7_REGS_PINSEL (AR7_REGS_BASE + 0x160C)
-#define AR7_REGS_VLYNQ0	(AR7_REGS_BASE + 0x1800)
+#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800)
 #define AR7_REGS_DCL	(AR7_REGS_BASE + 0x1a00)
-#define AR7_REGS_VLYNQ1	(AR7_REGS_BASE + 0x1c00)
+#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00)
 #define AR7_REGS_MDIO	(AR7_REGS_BASE + 0x1e00)
 #define AR7_REGS_IRQ	(AR7_REGS_BASE + 0x2400)
 #define AR7_REGS_MAC1	(AR7_REGS_BASE + 0x2800)
@@ -52,7 +52,7 @@
 #define UR8_REGS_UART1	(AR7_REGS_BASE + 0x0f00)
 
 /* Titan registers */
-#define TITAN_REGS_ESWITCH_BASE	(0x08640000)
+#define TITAN_REGS_ESWITCH_BASE (0x08640000)
 #define TITAN_REGS_MAC0		(TITAN_REGS_ESWITCH_BASE)
 #define TITAN_REGS_MAC1		(TITAN_REGS_ESWITCH_BASE + 0x0800)
 #define TITAN_REGS_MDIO		(TITAN_REGS_ESWITCH_BASE + 0x02000)
@@ -72,9 +72,9 @@
 
 /* GPIO control registers */
 #define AR7_GPIO_INPUT	0x0
-#define AR7_GPIO_OUTPUT	0x4
+#define AR7_GPIO_OUTPUT 0x4
 #define AR7_GPIO_DIR	0x8
-#define AR7_GPIO_ENABLE	0xc
+#define AR7_GPIO_ENABLE 0xc
 #define TITAN_GPIO_INPUT_0	0x0
 #define TITAN_GPIO_INPUT_1	0x4
 #define TITAN_GPIO_OUTPUT_0	0x8
@@ -88,10 +88,10 @@
 #define AR7_CHIP_7200	0x2b
 #define AR7_CHIP_7300	0x05
 #define AR7_CHIP_TITAN	0x07
-#define TITAN_CHIP_1050	0x0f
-#define TITAN_CHIP_1055	0x0e
-#define TITAN_CHIP_1056	0x0d
-#define TITAN_CHIP_1060	0x07
+#define TITAN_CHIP_1050 0x0f
+#define TITAN_CHIP_1055 0x0e
+#define TITAN_CHIP_1056 0x0d
+#define TITAN_CHIP_1060 0x07
 
 /* Interrupts */
 #define AR7_IRQ_UART0	15
diff --git a/arch/mips/include/asm/mach-ar7/irq.h b/arch/mips/include/asm/mach-ar7/irq.h
index 39e9757..7ad10e3 100644
--- a/arch/mips/include/asm/mach-ar7/irq.h
+++ b/arch/mips/include/asm/mach-ar7/irq.h
@@ -9,7 +9,7 @@
 #ifndef __ASM_AR7_IRQ_H
 #define __ASM_AR7_IRQ_H
 
-#define NR_IRQS	256
+#define NR_IRQS 256
 
 #include_next <irq.h>
 
diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
index a5e0f17..b86a125 100644
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -34,18 +34,44 @@
 #define AR71XX_UART_SIZE	0x100
 #define AR71XX_USB_CTRL_BASE	(AR71XX_APB_BASE + 0x00030000)
 #define AR71XX_USB_CTRL_SIZE	0x100
-#define AR71XX_GPIO_BASE        (AR71XX_APB_BASE + 0x00040000)
-#define AR71XX_GPIO_SIZE        0x100
+#define AR71XX_GPIO_BASE	(AR71XX_APB_BASE + 0x00040000)
+#define AR71XX_GPIO_SIZE	0x100
 #define AR71XX_PLL_BASE		(AR71XX_APB_BASE + 0x00050000)
 #define AR71XX_PLL_SIZE		0x100
 #define AR71XX_RESET_BASE	(AR71XX_APB_BASE + 0x00060000)
 #define AR71XX_RESET_SIZE	0x100
 
+#define AR71XX_PCI_MEM_BASE	0x10000000
+#define AR71XX_PCI_MEM_SIZE	0x07000000
+
+#define AR71XX_PCI_WIN0_OFFS	0x10000000
+#define AR71XX_PCI_WIN1_OFFS	0x11000000
+#define AR71XX_PCI_WIN2_OFFS	0x12000000
+#define AR71XX_PCI_WIN3_OFFS	0x13000000
+#define AR71XX_PCI_WIN4_OFFS	0x14000000
+#define AR71XX_PCI_WIN5_OFFS	0x15000000
+#define AR71XX_PCI_WIN6_OFFS	0x16000000
+#define AR71XX_PCI_WIN7_OFFS	0x07000000
+
+#define AR71XX_PCI_CFG_BASE	\
+	(AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
+#define AR71XX_PCI_CFG_SIZE	0x100
+
 #define AR7240_USB_CTRL_BASE	(AR71XX_APB_BASE + 0x00030000)
 #define AR7240_USB_CTRL_SIZE	0x100
 #define AR7240_OHCI_BASE	0x1b000000
 #define AR7240_OHCI_SIZE	0x1000
 
+#define AR724X_PCI_MEM_BASE	0x10000000
+#define AR724X_PCI_MEM_SIZE	0x04000000
+
+#define AR724X_PCI_CFG_BASE	0x14000000
+#define AR724X_PCI_CFG_SIZE	0x1000
+#define AR724X_PCI_CRP_BASE	(AR71XX_APB_BASE + 0x000c0000)
+#define AR724X_PCI_CRP_SIZE	0x1000
+#define AR724X_PCI_CTRL_BASE	(AR71XX_APB_BASE + 0x000f0000)
+#define AR724X_PCI_CTRL_SIZE	0x100
+
 #define AR724X_EHCI_BASE	0x1b000000
 #define AR724X_EHCI_SIZE	0x1000
 
@@ -68,6 +94,25 @@
 #define AR934X_SRIF_BASE	(AR71XX_APB_BASE + 0x00116000)
 #define AR934X_SRIF_SIZE	0x1000
 
+#define QCA955X_PCI_MEM_BASE0	0x10000000
+#define QCA955X_PCI_MEM_BASE1	0x12000000
+#define QCA955X_PCI_MEM_SIZE	0x02000000
+#define QCA955X_PCI_CFG_BASE0	0x14000000
+#define QCA955X_PCI_CFG_BASE1	0x16000000
+#define QCA955X_PCI_CFG_SIZE	0x1000
+#define QCA955X_PCI_CRP_BASE0	(AR71XX_APB_BASE + 0x000c0000)
+#define QCA955X_PCI_CRP_BASE1	(AR71XX_APB_BASE + 0x00250000)
+#define QCA955X_PCI_CRP_SIZE	0x1000
+#define QCA955X_PCI_CTRL_BASE0	(AR71XX_APB_BASE + 0x000f0000)
+#define QCA955X_PCI_CTRL_BASE1	(AR71XX_APB_BASE + 0x00280000)
+#define QCA955X_PCI_CTRL_SIZE	0x100
+
+#define QCA955X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
+#define QCA955X_WMAC_SIZE	0x20000
+#define QCA955X_EHCI0_BASE	0x1b000000
+#define QCA955X_EHCI1_BASE	0x1b400000
+#define QCA955X_EHCI_SIZE	0x1000
+
 /*
  * DDR_CTRL block
  */
@@ -199,6 +244,41 @@
 #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL	BIT(21)
 #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL	BIT(24)
 
+#define QCA955X_PLL_CPU_CONFIG_REG		0x00
+#define QCA955X_PLL_DDR_CONFIG_REG		0x04
+#define QCA955X_PLL_CLK_CTRL_REG		0x08
+
+#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
+#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
+#define QCA955X_PLL_CPU_CONFIG_NINT_SHIFT	6
+#define QCA955X_PLL_CPU_CONFIG_NINT_MASK	0x3f
+#define QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT	12
+#define QCA955X_PLL_CPU_CONFIG_REFDIV_MASK	0x1f
+#define QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT	19
+#define QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK	0x3
+
+#define QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT	0
+#define QCA955X_PLL_DDR_CONFIG_NFRAC_MASK	0x3ff
+#define QCA955X_PLL_DDR_CONFIG_NINT_SHIFT	10
+#define QCA955X_PLL_DDR_CONFIG_NINT_MASK	0x3f
+#define QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT	16
+#define QCA955X_PLL_DDR_CONFIG_REFDIV_MASK	0x1f
+#define QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT	23
+#define QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK	0x7
+
+#define QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS		BIT(2)
+#define QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS		BIT(3)
+#define QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS		BIT(4)
+#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT		5
+#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK		0x1f
+#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT		10
+#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK		0x1f
+#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT		15
+#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK		0x1f
+#define QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL		BIT(20)
+#define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL		BIT(21)
+#define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
+
 /*
  * USB_CONFIG block
  */
@@ -238,6 +318,10 @@
 #define AR934X_RESET_REG_BOOTSTRAP		0xb0
 #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS	0xac
 
+#define QCA955X_RESET_REG_RESET_MODULE		0x1c
+#define QCA955X_RESET_REG_BOOTSTRAP		0xb0
+#define QCA955X_RESET_REG_EXT_INT_STATUS	0xac
+
 #define MISC_INT_ETHSW			BIT(12)
 #define MISC_INT_TIMER4			BIT(10)
 #define MISC_INT_TIMER3			BIT(9)
@@ -312,9 +396,11 @@
 #define AR934X_BOOTSTRAP_EJTAG_MODE	BIT(5)
 #define AR934X_BOOTSTRAP_REF_CLK_40	BIT(4)
 #define AR934X_BOOTSTRAP_BOOT_FROM_SPI	BIT(2)
-#define AR934X_BOOTSTRAP_SDRAM_DISABLED	BIT(1)
+#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
 #define AR934X_BOOTSTRAP_DDR1		BIT(0)
 
+#define QCA955X_BOOTSTRAP_REF_CLK_40	BIT(4)
+
 #define AR934X_PCIE_WMAC_INT_WMAC_MISC		BIT(0)
 #define AR934X_PCIE_WMAC_INT_WMAC_TX		BIT(1)
 #define AR934X_PCIE_WMAC_INT_WMAC_RXLP		BIT(2)
@@ -333,6 +419,37 @@
 	 AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
 	 AR934X_PCIE_WMAC_INT_PCIE_RC3)
 
+#define QCA955X_EXT_INT_WMAC_MISC		BIT(0)
+#define QCA955X_EXT_INT_WMAC_TX			BIT(1)
+#define QCA955X_EXT_INT_WMAC_RXLP		BIT(2)
+#define QCA955X_EXT_INT_WMAC_RXHP		BIT(3)
+#define QCA955X_EXT_INT_PCIE_RC1		BIT(4)
+#define QCA955X_EXT_INT_PCIE_RC1_INT0		BIT(5)
+#define QCA955X_EXT_INT_PCIE_RC1_INT1		BIT(6)
+#define QCA955X_EXT_INT_PCIE_RC1_INT2		BIT(7)
+#define QCA955X_EXT_INT_PCIE_RC1_INT3		BIT(8)
+#define QCA955X_EXT_INT_PCIE_RC2		BIT(12)
+#define QCA955X_EXT_INT_PCIE_RC2_INT0		BIT(13)
+#define QCA955X_EXT_INT_PCIE_RC2_INT1		BIT(14)
+#define QCA955X_EXT_INT_PCIE_RC2_INT2		BIT(15)
+#define QCA955X_EXT_INT_PCIE_RC2_INT3		BIT(16)
+#define QCA955X_EXT_INT_USB1			BIT(24)
+#define QCA955X_EXT_INT_USB2			BIT(28)
+
+#define QCA955X_EXT_INT_WMAC_ALL \
+	(QCA955X_EXT_INT_WMAC_MISC | QCA955X_EXT_INT_WMAC_TX | \
+	 QCA955X_EXT_INT_WMAC_RXLP | QCA955X_EXT_INT_WMAC_RXHP)
+
+#define QCA955X_EXT_INT_PCIE_RC1_ALL \
+	(QCA955X_EXT_INT_PCIE_RC1 | QCA955X_EXT_INT_PCIE_RC1_INT0 | \
+	 QCA955X_EXT_INT_PCIE_RC1_INT1 | QCA955X_EXT_INT_PCIE_RC1_INT2 | \
+	 QCA955X_EXT_INT_PCIE_RC1_INT3)
+
+#define QCA955X_EXT_INT_PCIE_RC2_ALL \
+	(QCA955X_EXT_INT_PCIE_RC2 | QCA955X_EXT_INT_PCIE_RC2_INT0 | \
+	 QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
+	 QCA955X_EXT_INT_PCIE_RC2_INT3)
+
 #define REV_ID_MAJOR_MASK		0xfff0
 #define REV_ID_MAJOR_AR71XX		0x00a0
 #define REV_ID_MAJOR_AR913X		0x00b0
@@ -344,6 +461,8 @@
 #define REV_ID_MAJOR_AR9341		0x0120
 #define REV_ID_MAJOR_AR9342		0x1120
 #define REV_ID_MAJOR_AR9344		0x2120
+#define REV_ID_MAJOR_QCA9556		0x0130
+#define REV_ID_MAJOR_QCA9558		0x1130
 
 #define AR71XX_REV_ID_MINOR_MASK	0x3
 #define AR71XX_REV_ID_MINOR_AR7130	0x0
@@ -362,7 +481,9 @@
 
 #define AR724X_REV_ID_REVISION_MASK	0x3
 
-#define AR934X_REV_ID_REVISION_MASK     0xf
+#define AR934X_REV_ID_REVISION_MASK	0xf
+
+#define QCA955X_REV_ID_REVISION_MASK	0xf
 
 /*
  * SPI block
@@ -401,12 +522,15 @@
 #define AR71XX_GPIO_REG_INT_ENABLE	0x24
 #define AR71XX_GPIO_REG_FUNC		0x28
 
+#define AR934X_GPIO_REG_FUNC		0x6c
+
 #define AR71XX_GPIO_COUNT		16
 #define AR7240_GPIO_COUNT		18
 #define AR7241_GPIO_COUNT		20
 #define AR913X_GPIO_COUNT		22
 #define AR933X_GPIO_COUNT		30
 #define AR934X_GPIO_COUNT		23
+#define QCA955X_GPIO_COUNT		24
 
 /*
  * SRIF block
diff --git a/arch/mips/include/asm/mach-ath79/ar933x_uart.h b/arch/mips/include/asm/mach-ath79/ar933x_uart.h
index 5273055..c2917b3 100644
--- a/arch/mips/include/asm/mach-ath79/ar933x_uart.h
+++ b/arch/mips/include/asm/mach-ath79/ar933x_uart.h
@@ -26,14 +26,14 @@
 
 #define AR933X_UART_CS_PARITY_S		0
 #define AR933X_UART_CS_PARITY_M		0x3
-#define   AR933X_UART_CS_PARITY_NONE	0
-#define   AR933X_UART_CS_PARITY_ODD	1
-#define   AR933X_UART_CS_PARITY_EVEN	2
+#define	  AR933X_UART_CS_PARITY_NONE	0
+#define	  AR933X_UART_CS_PARITY_ODD	1
+#define	  AR933X_UART_CS_PARITY_EVEN	2
 #define AR933X_UART_CS_IF_MODE_S	2
 #define AR933X_UART_CS_IF_MODE_M	0x3
-#define   AR933X_UART_CS_IF_MODE_NONE	0
-#define   AR933X_UART_CS_IF_MODE_DTE	1
-#define   AR933X_UART_CS_IF_MODE_DCE	2
+#define	  AR933X_UART_CS_IF_MODE_NONE	0
+#define	  AR933X_UART_CS_IF_MODE_DTE	1
+#define	  AR933X_UART_CS_IF_MODE_DCE	2
 #define AR933X_UART_CS_FLOW_CTRL_S	4
 #define AR933X_UART_CS_FLOW_CTRL_M	0x3
 #define AR933X_UART_CS_DMA_EN		BIT(6)
diff --git a/arch/mips/include/asm/mach-ath79/ath79.h b/arch/mips/include/asm/mach-ath79/ath79.h
index 4f248c3..1557934 100644
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -32,6 +32,8 @@
 	ATH79_SOC_AR9341,
 	ATH79_SOC_AR9342,
 	ATH79_SOC_AR9344,
+	ATH79_SOC_QCA9556,
+	ATH79_SOC_QCA9558,
 };
 
 extern enum ath79_soc_type ath79_soc;
@@ -98,6 +100,21 @@
 	return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
 }
 
+static inline int soc_is_qca9556(void)
+{
+	return ath79_soc == ATH79_SOC_QCA9556;
+}
+
+static inline int soc_is_qca9558(void)
+{
+	return ath79_soc == ATH79_SOC_QCA9558;
+}
+
+static inline int soc_is_qca955x(void)
+{
+	return soc_is_qca9556() || soc_is_qca9558();
+}
+
 extern void __iomem *ath79_ddr_base;
 extern void __iomem *ath79_pll_base;
 extern void __iomem *ath79_reset_base;
diff --git a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
index ea4b66d..ddb947e 100644
--- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
@@ -49,7 +49,7 @@
 #define cpu_has_64bits		0
 #define cpu_has_64bit_zero_reg	0
 #define cpu_has_64bit_gp_regs	0
-#define cpu_has_64bit_addresses	0
+#define cpu_has_64bit_addresses 0
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
diff --git a/arch/mips/include/asm/mach-ath79/irq.h b/arch/mips/include/asm/mach-ath79/irq.h
index 0968f69..5c9ca76 100644
--- a/arch/mips/include/asm/mach-ath79/irq.h
+++ b/arch/mips/include/asm/mach-ath79/irq.h
@@ -10,10 +10,13 @@
 #define __ASM_MACH_ATH79_IRQ_H
 
 #define MIPS_CPU_IRQ_BASE	0
-#define NR_IRQS			48
+#define NR_IRQS			51
+
+#define ATH79_CPU_IRQ(_x)	(MIPS_CPU_IRQ_BASE + (_x))
 
 #define ATH79_MISC_IRQ_BASE	8
 #define ATH79_MISC_IRQ_COUNT	32
+#define ATH79_MISC_IRQ(_x)	(ATH79_MISC_IRQ_BASE + (_x))
 
 #define ATH79_PCI_IRQ_BASE	(ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT)
 #define ATH79_PCI_IRQ_COUNT	6
@@ -23,25 +26,9 @@
 #define ATH79_IP2_IRQ_COUNT	2
 #define ATH79_IP2_IRQ(_x)	(ATH79_IP2_IRQ_BASE + (_x))
 
-#define ATH79_CPU_IRQ_IP2	(MIPS_CPU_IRQ_BASE + 2)
-#define ATH79_CPU_IRQ_USB	(MIPS_CPU_IRQ_BASE + 3)
-#define ATH79_CPU_IRQ_GE0	(MIPS_CPU_IRQ_BASE + 4)
-#define ATH79_CPU_IRQ_GE1	(MIPS_CPU_IRQ_BASE + 5)
-#define ATH79_CPU_IRQ_MISC	(MIPS_CPU_IRQ_BASE + 6)
-#define ATH79_CPU_IRQ_TIMER	(MIPS_CPU_IRQ_BASE + 7)
-
-#define ATH79_MISC_IRQ_TIMER	(ATH79_MISC_IRQ_BASE + 0)
-#define ATH79_MISC_IRQ_ERROR	(ATH79_MISC_IRQ_BASE + 1)
-#define ATH79_MISC_IRQ_GPIO	(ATH79_MISC_IRQ_BASE + 2)
-#define ATH79_MISC_IRQ_UART	(ATH79_MISC_IRQ_BASE + 3)
-#define ATH79_MISC_IRQ_WDOG	(ATH79_MISC_IRQ_BASE + 4)
-#define ATH79_MISC_IRQ_PERFC	(ATH79_MISC_IRQ_BASE + 5)
-#define ATH79_MISC_IRQ_OHCI	(ATH79_MISC_IRQ_BASE + 6)
-#define ATH79_MISC_IRQ_DMA	(ATH79_MISC_IRQ_BASE + 7)
-#define ATH79_MISC_IRQ_TIMER2	(ATH79_MISC_IRQ_BASE + 8)
-#define ATH79_MISC_IRQ_TIMER3	(ATH79_MISC_IRQ_BASE + 9)
-#define ATH79_MISC_IRQ_TIMER4	(ATH79_MISC_IRQ_BASE + 10)
-#define ATH79_MISC_IRQ_ETHSW	(ATH79_MISC_IRQ_BASE + 12)
+#define ATH79_IP3_IRQ_BASE	(ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT)
+#define ATH79_IP3_IRQ_COUNT     3
+#define ATH79_IP3_IRQ(_x)       (ATH79_IP3_IRQ_BASE + (_x))
 
 #include_next <irq.h>
 
diff --git a/arch/mips/include/asm/mach-ath79/pci.h b/arch/mips/include/asm/mach-ath79/pci.h
deleted file mode 100644
index 7868f7f..0000000
--- a/arch/mips/include/asm/mach-ath79/pci.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  Atheros AR71XX/AR724X PCI support
- *
- *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
- *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_ATH79_PCI_H
-#define __ASM_MACH_ATH79_PCI_H
-
-#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX)
-int ar71xx_pcibios_init(void);
-#else
-static inline int ar71xx_pcibios_init(void) { return 0; }
-#endif
-
-#if defined(CONFIG_PCI_AR724X)
-int ar724x_pcibios_init(int irq);
-#else
-static inline int ar724x_pcibios_init(int irq) { return 0; }
-#endif
-
-#endif /* __ASM_MACH_ATH79_PCI_H */
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 569828d..3e11a46 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -349,7 +349,7 @@
 #define AU1000_INTC0_INT_LAST	(AU1000_INTC0_INT_BASE + 31)
 #define AU1000_INTC1_INT_BASE	(AU1000_INTC0_INT_LAST + 1)
 #define AU1000_INTC1_INT_LAST	(AU1000_INTC1_INT_BASE + 31)
-#define AU1000_MAX_INTR 	AU1000_INTC1_INT_LAST
+#define AU1000_MAX_INTR		AU1000_INTC1_INT_LAST
 
 /* Au1300-style (GPIC): 1 controller with up to 128 sources */
 #define ALCHEMY_GPIC_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
@@ -589,7 +589,7 @@
 	AU1550_GPIO14_INT,
 	AU1550_GPIO15_INT,
 	AU1550_GPIO200_INT,
-	AU1550_GPIO201_205_INT,	/* Logical or of GPIO201:205 */
+	AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */
 	AU1550_GPIO16_INT,
 	AU1550_GPIO17_INT,
 	AU1550_GPIO20_INT,
@@ -603,7 +603,7 @@
 	AU1550_GPIO28_INT,
 	AU1550_GPIO206_INT,
 	AU1550_GPIO207_INT,
-	AU1550_GPIO208_215_INT,	/* Logical or of GPIO208:215 */
+	AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */
 };
 
 enum soc_au1200_ints {
@@ -636,7 +636,7 @@
 	AU1200_GPIO205_INT,
 	AU1200_GPIO206_INT,
 	AU1200_GPIO207_INT,
-	AU1200_GPIO208_215_INT,	/* Logical OR of 208:215 */
+	AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */
 	AU1200_USB_INT,
 	AU1200_LCD_INT,
 	AU1200_MAE_BOTH_INT,
@@ -823,7 +823,7 @@
 #define GPIC_GPIO_TO_BIT(gpio)	\
 	(1 << ((gpio) & 0x1f))
 
-#define GPIC_GPIO_BANKOFF(gpio)	\
+#define GPIC_GPIO_BANKOFF(gpio) \
 	(((gpio) >> 5) * 4)
 
 /* Pin Control bits: who owns the pin, what does it do */
@@ -958,32 +958,32 @@
 #define MEM_STSTAT		0xB4001104
 
 #define MEM_STNAND_CMD		0x0
-#define MEM_STNAND_ADDR 	0x4
-#define MEM_STNAND_DATA 	0x20
+#define MEM_STNAND_ADDR		0x4
+#define MEM_STNAND_DATA		0x20
 
 
 /* Programmable Counters 0 and 1 */
 #define SYS_BASE		0xB1900000
 #define SYS_COUNTER_CNTRL	(SYS_BASE + 0x14)
-#  define SYS_CNTRL_E1S 	(1 << 23)
-#  define SYS_CNTRL_T1S 	(1 << 20)
-#  define SYS_CNTRL_M21 	(1 << 19)
-#  define SYS_CNTRL_M11 	(1 << 18)
-#  define SYS_CNTRL_M01 	(1 << 17)
-#  define SYS_CNTRL_C1S 	(1 << 16)
+#  define SYS_CNTRL_E1S		(1 << 23)
+#  define SYS_CNTRL_T1S		(1 << 20)
+#  define SYS_CNTRL_M21		(1 << 19)
+#  define SYS_CNTRL_M11		(1 << 18)
+#  define SYS_CNTRL_M01		(1 << 17)
+#  define SYS_CNTRL_C1S		(1 << 16)
 #  define SYS_CNTRL_BP		(1 << 14)
-#  define SYS_CNTRL_EN1 	(1 << 13)
-#  define SYS_CNTRL_BT1 	(1 << 12)
-#  define SYS_CNTRL_EN0 	(1 << 11)
-#  define SYS_CNTRL_BT0 	(1 << 10)
+#  define SYS_CNTRL_EN1		(1 << 13)
+#  define SYS_CNTRL_BT1		(1 << 12)
+#  define SYS_CNTRL_EN0		(1 << 11)
+#  define SYS_CNTRL_BT0		(1 << 10)
 #  define SYS_CNTRL_E0		(1 << 8)
-#  define SYS_CNTRL_E0S 	(1 << 7)
-#  define SYS_CNTRL_32S 	(1 << 5)
-#  define SYS_CNTRL_T0S 	(1 << 4)
-#  define SYS_CNTRL_M20 	(1 << 3)
-#  define SYS_CNTRL_M10 	(1 << 2)
-#  define SYS_CNTRL_M00 	(1 << 1)
-#  define SYS_CNTRL_C0S 	(1 << 0)
+#  define SYS_CNTRL_E0S		(1 << 7)
+#  define SYS_CNTRL_32S		(1 << 5)
+#  define SYS_CNTRL_T0S		(1 << 4)
+#  define SYS_CNTRL_M20		(1 << 3)
+#  define SYS_CNTRL_M10		(1 << 2)
+#  define SYS_CNTRL_M00		(1 << 1)
+#  define SYS_CNTRL_C0S		(1 << 0)
 
 /* Programmable Counter 0 Registers */
 #define SYS_TOYTRIM		(SYS_BASE + 0)
@@ -1003,33 +1003,33 @@
 
 /* I2S Controller */
 #define I2S_DATA		0xB1000000
-#  define I2S_DATA_MASK 	0xffffff
+#  define I2S_DATA_MASK		0xffffff
 #define I2S_CONFIG		0xB1000004
-#  define I2S_CONFIG_XU 	(1 << 25)
-#  define I2S_CONFIG_XO 	(1 << 24)
-#  define I2S_CONFIG_RU 	(1 << 23)
-#  define I2S_CONFIG_RO 	(1 << 22)
-#  define I2S_CONFIG_TR 	(1 << 21)
-#  define I2S_CONFIG_TE 	(1 << 20)
-#  define I2S_CONFIG_TF 	(1 << 19)
-#  define I2S_CONFIG_RR 	(1 << 18)
-#  define I2S_CONFIG_RE 	(1 << 17)
-#  define I2S_CONFIG_RF 	(1 << 16)
-#  define I2S_CONFIG_PD 	(1 << 11)
-#  define I2S_CONFIG_LB 	(1 << 10)
-#  define I2S_CONFIG_IC 	(1 << 9)
+#  define I2S_CONFIG_XU		(1 << 25)
+#  define I2S_CONFIG_XO		(1 << 24)
+#  define I2S_CONFIG_RU		(1 << 23)
+#  define I2S_CONFIG_RO		(1 << 22)
+#  define I2S_CONFIG_TR		(1 << 21)
+#  define I2S_CONFIG_TE		(1 << 20)
+#  define I2S_CONFIG_TF		(1 << 19)
+#  define I2S_CONFIG_RR		(1 << 18)
+#  define I2S_CONFIG_RE		(1 << 17)
+#  define I2S_CONFIG_RF		(1 << 16)
+#  define I2S_CONFIG_PD		(1 << 11)
+#  define I2S_CONFIG_LB		(1 << 10)
+#  define I2S_CONFIG_IC		(1 << 9)
 #  define I2S_CONFIG_FM_BIT	7
 #  define I2S_CONFIG_FM_MASK	(0x3 << I2S_CONFIG_FM_BIT)
 #    define I2S_CONFIG_FM_I2S	(0x0 << I2S_CONFIG_FM_BIT)
 #    define I2S_CONFIG_FM_LJ	(0x1 << I2S_CONFIG_FM_BIT)
 #    define I2S_CONFIG_FM_RJ	(0x2 << I2S_CONFIG_FM_BIT)
-#  define I2S_CONFIG_TN 	(1 << 6)
-#  define I2S_CONFIG_RN 	(1 << 5)
+#  define I2S_CONFIG_TN		(1 << 6)
+#  define I2S_CONFIG_RN		(1 << 5)
 #  define I2S_CONFIG_SZ_BIT	0
 #  define I2S_CONFIG_SZ_MASK	(0x1F << I2S_CONFIG_SZ_BIT)
 
 #define I2S_CONTROL		0xB1000008
-#  define I2S_CONTROL_D 	(1 << 1)
+#  define I2S_CONTROL_D		(1 << 1)
 #  define I2S_CONTROL_CE	(1 << 0)
 
 
@@ -1037,16 +1037,16 @@
 
 /* 4 byte offsets from AU1000_ETH_BASE */
 #define MAC_CONTROL		0x0
-#  define MAC_RX_ENABLE 	(1 << 2)
-#  define MAC_TX_ENABLE 	(1 << 3)
-#  define MAC_DEF_CHECK 	(1 << 5)
-#  define MAC_SET_BL(X) 	(((X) & 0x3) << 6)
+#  define MAC_RX_ENABLE		(1 << 2)
+#  define MAC_TX_ENABLE		(1 << 3)
+#  define MAC_DEF_CHECK		(1 << 5)
+#  define MAC_SET_BL(X)		(((X) & 0x3) << 6)
 #  define MAC_AUTO_PAD		(1 << 8)
 #  define MAC_DISABLE_RETRY	(1 << 10)
 #  define MAC_DISABLE_BCAST	(1 << 11)
 #  define MAC_LATE_COL		(1 << 12)
-#  define MAC_HASH_MODE 	(1 << 13)
-#  define MAC_HASH_ONLY 	(1 << 15)
+#  define MAC_HASH_MODE		(1 << 13)
+#  define MAC_HASH_ONLY		(1 << 15)
 #  define MAC_PASS_ALL		(1 << 16)
 #  define MAC_INVERSE_FILTER	(1 << 17)
 #  define MAC_PROMISCUOUS	(1 << 18)
@@ -1083,9 +1083,9 @@
 #  define MAC_EN_RESET0		(1 << 1)
 #  define MAC_EN_TOSS		(0 << 2)
 #  define MAC_EN_CACHEABLE	(1 << 3)
-#  define MAC_EN_RESET1 	(1 << 4)
-#  define MAC_EN_RESET2 	(1 << 5)
-#  define MAC_DMA_RESET 	(1 << 6)
+#  define MAC_EN_RESET1		(1 << 4)
+#  define MAC_EN_RESET2		(1 << 5)
+#  define MAC_DMA_RESET		(1 << 6)
 
 /* Ethernet Controller DMA Channels */
 
@@ -1095,7 +1095,7 @@
 #define MAC_TX_BUFF0_STATUS	0x0
 #  define TX_FRAME_ABORTED	(1 << 0)
 #  define TX_JAB_TIMEOUT	(1 << 1)
-#  define TX_NO_CARRIER 	(1 << 2)
+#  define TX_NO_CARRIER		(1 << 2)
 #  define TX_LOSS_CARRIER	(1 << 3)
 #  define TX_EXC_DEF		(1 << 4)
 #  define TX_LATE_COLL_ABORT	(1 << 5)
@@ -1106,7 +1106,7 @@
 #  define TX_COLL_CNT_MASK	(0xF << 10)
 #  define TX_PKT_RETRY		(1 << 31)
 #define MAC_TX_BUFF0_ADDR	0x4
-#  define TX_DMA_ENABLE 	(1 << 0)
+#  define TX_DMA_ENABLE		(1 << 0)
 #  define TX_T_DONE		(1 << 1)
 #  define TX_GET_DMA_BUFFER(X)	(((X) >> 2) & 0x3)
 #define MAC_TX_BUFF0_LEN	0x8
@@ -1125,7 +1125,7 @@
 /* offsets from MAC_RX_RING_ADDR */
 #define MAC_RX_BUFF0_STATUS	0x0
 #  define RX_FRAME_LEN_MASK	0x3fff
-#  define RX_WDOG_TIMER 	(1 << 14)
+#  define RX_WDOG_TIMER		(1 << 14)
 #  define RX_RUNT		(1 << 15)
 #  define RX_OVERLEN		(1 << 16)
 #  define RX_COLL		(1 << 17)
@@ -1148,7 +1148,7 @@
 		    RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
 		    RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
 #define MAC_RX_BUFF0_ADDR	0x4
-#  define RX_DMA_ENABLE 	(1 << 0)
+#  define RX_DMA_ENABLE		(1 << 0)
 #  define RX_T_DONE		(1 << 1)
 #  define RX_GET_DMA_BUFFER(X)	(((X) >> 2) & 0x3)
 #  define RX_SET_BUFF_ADDR(X)	((X) & 0xffffffc0)
@@ -1173,34 +1173,34 @@
 
 /* SSIO */
 #define SSI0_STATUS		0xB1600000
-#  define SSI_STATUS_BF 	(1 << 4)
-#  define SSI_STATUS_OF 	(1 << 3)
-#  define SSI_STATUS_UF 	(1 << 2)
+#  define SSI_STATUS_BF		(1 << 4)
+#  define SSI_STATUS_OF		(1 << 3)
+#  define SSI_STATUS_UF		(1 << 2)
 #  define SSI_STATUS_D		(1 << 1)
 #  define SSI_STATUS_B		(1 << 0)
 #define SSI0_INT		0xB1600004
 #  define SSI_INT_OI		(1 << 3)
 #  define SSI_INT_UI		(1 << 2)
 #  define SSI_INT_DI		(1 << 1)
-#define SSI0_INT_ENABLE 	0xB1600008
+#define SSI0_INT_ENABLE		0xB1600008
 #  define SSI_INTE_OIE		(1 << 3)
 #  define SSI_INTE_UIE		(1 << 2)
 #  define SSI_INTE_DIE		(1 << 1)
 #define SSI0_CONFIG		0xB1600020
-#  define SSI_CONFIG_AO 	(1 << 24)
-#  define SSI_CONFIG_DO 	(1 << 23)
+#  define SSI_CONFIG_AO		(1 << 24)
+#  define SSI_CONFIG_DO		(1 << 23)
 #  define SSI_CONFIG_ALEN_BIT	20
 #  define SSI_CONFIG_ALEN_MASK	(0x7 << 20)
 #  define SSI_CONFIG_DLEN_BIT	16
 #  define SSI_CONFIG_DLEN_MASK	(0x7 << 16)
-#  define SSI_CONFIG_DD 	(1 << 11)
-#  define SSI_CONFIG_AD 	(1 << 10)
+#  define SSI_CONFIG_DD		(1 << 11)
+#  define SSI_CONFIG_AD		(1 << 10)
 #  define SSI_CONFIG_BM_BIT	8
 #  define SSI_CONFIG_BM_MASK	(0x3 << 8)
-#  define SSI_CONFIG_CE 	(1 << 7)
-#  define SSI_CONFIG_DP 	(1 << 6)
-#  define SSI_CONFIG_DL 	(1 << 5)
-#  define SSI_CONFIG_EP 	(1 << 4)
+#  define SSI_CONFIG_CE		(1 << 7)
+#  define SSI_CONFIG_DP		(1 << 6)
+#  define SSI_CONFIG_DL		(1 << 5)
+#  define SSI_CONFIG_EP		(1 << 4)
 #define SSI0_ADATA		0xB1600024
 #  define SSI_AD_D		(1 << 24)
 #  define SSI_AD_ADDR_BIT	16
@@ -1210,12 +1210,12 @@
 #define SSI0_CLKDIV		0xB1600028
 #define SSI0_CONTROL		0xB1600100
 #  define SSI_CONTROL_CD	(1 << 1)
-#  define SSI_CONTROL_E 	(1 << 0)
+#  define SSI_CONTROL_E		(1 << 0)
 
 /* SSI1 */
 #define SSI1_STATUS		0xB1680000
 #define SSI1_INT		0xB1680004
-#define SSI1_INT_ENABLE 	0xB1680008
+#define SSI1_INT_ENABLE		0xB1680008
 #define SSI1_CONFIG		0xB1680020
 #define SSI1_ADATA		0xB1680024
 #define SSI1_CLKDIV		0xB1680028
@@ -1242,8 +1242,8 @@
 
 #define SSI_CONFIG_AO		(1 << 24)
 #define SSI_CONFIG_DO		(1 << 23)
-#define SSI_CONFIG_ALEN 	(7 << 20)
-#define SSI_CONFIG_DLEN 	(15 << 16)
+#define SSI_CONFIG_ALEN		(7 << 20)
+#define SSI_CONFIG_DLEN		(15 << 16)
 #define SSI_CONFIG_DD		(1 << 11)
 #define SSI_CONFIG_AD		(1 << 10)
 #define SSI_CONFIG_BM		(3 << 8)
@@ -1305,7 +1305,7 @@
 #  define SYS_PF_CS		(1 << 16)	/* EXTCLK0/32KHz to gpio2 */
 #  define SYS_PF_EX0		(1 << 9)	/* GPIO2/clock */
 
-/* Au1550 only.  Redefines lots of pins */
+/* Au1550 only.	 Redefines lots of pins */
 #  define SYS_PF_PSC2_MASK	(7 << 17)
 #  define SYS_PF_PSC2_AC97	0
 #  define SYS_PF_PSC2_SPI	0
@@ -1322,33 +1322,33 @@
 #  define SYS_PF_MUST_BE_SET	((1 << 5) | (1 << 2))
 
 /* Au1200 only */
-#define SYS_PINFUNC_DMA 	(1 << 31)
-#define SYS_PINFUNC_S0A 	(1 << 30)
-#define SYS_PINFUNC_S1A 	(1 << 29)
-#define SYS_PINFUNC_LP0 	(1 << 28)
-#define SYS_PINFUNC_LP1 	(1 << 27)
-#define SYS_PINFUNC_LD16 	(1 << 26)
-#define SYS_PINFUNC_LD8 	(1 << 25)
-#define SYS_PINFUNC_LD1 	(1 << 24)
-#define SYS_PINFUNC_LD0 	(1 << 23)
-#define SYS_PINFUNC_P1A 	(3 << 21)
-#define SYS_PINFUNC_P1B 	(1 << 20)
-#define SYS_PINFUNC_FS3 	(1 << 19)
-#define SYS_PINFUNC_P0A 	(3 << 17)
+#define SYS_PINFUNC_DMA		(1 << 31)
+#define SYS_PINFUNC_S0A		(1 << 30)
+#define SYS_PINFUNC_S1A		(1 << 29)
+#define SYS_PINFUNC_LP0		(1 << 28)
+#define SYS_PINFUNC_LP1		(1 << 27)
+#define SYS_PINFUNC_LD16	(1 << 26)
+#define SYS_PINFUNC_LD8		(1 << 25)
+#define SYS_PINFUNC_LD1		(1 << 24)
+#define SYS_PINFUNC_LD0		(1 << 23)
+#define SYS_PINFUNC_P1A		(3 << 21)
+#define SYS_PINFUNC_P1B		(1 << 20)
+#define SYS_PINFUNC_FS3		(1 << 19)
+#define SYS_PINFUNC_P0A		(3 << 17)
 #define SYS_PINFUNC_CS		(1 << 16)
-#define SYS_PINFUNC_CIM 	(1 << 15)
-#define SYS_PINFUNC_P1C 	(1 << 14)
-#define SYS_PINFUNC_U1T 	(1 << 12)
-#define SYS_PINFUNC_U1R 	(1 << 11)
-#define SYS_PINFUNC_EX1 	(1 << 10)
-#define SYS_PINFUNC_EX0 	(1 << 9)
-#define SYS_PINFUNC_U0R 	(1 << 8)
+#define SYS_PINFUNC_CIM		(1 << 15)
+#define SYS_PINFUNC_P1C		(1 << 14)
+#define SYS_PINFUNC_U1T		(1 << 12)
+#define SYS_PINFUNC_U1R		(1 << 11)
+#define SYS_PINFUNC_EX1		(1 << 10)
+#define SYS_PINFUNC_EX0		(1 << 9)
+#define SYS_PINFUNC_U0R		(1 << 8)
 #define SYS_PINFUNC_MC		(1 << 7)
-#define SYS_PINFUNC_S0B 	(1 << 6)
-#define SYS_PINFUNC_S0C 	(1 << 5)
-#define SYS_PINFUNC_P0B 	(1 << 4)
-#define SYS_PINFUNC_U0T 	(1 << 3)
-#define SYS_PINFUNC_S1B 	(1 << 2)
+#define SYS_PINFUNC_S0B		(1 << 6)
+#define SYS_PINFUNC_S0C		(1 << 5)
+#define SYS_PINFUNC_P0B		(1 << 4)
+#define SYS_PINFUNC_U0T		(1 << 3)
+#define SYS_PINFUNC_S1B		(1 << 2)
 
 /* Power Management */
 #define SYS_SCRATCH0		0xB1900018
@@ -1405,7 +1405,7 @@
 #  define SYS_CS_DI2		(1 << 16)
 #  define SYS_CS_CI2		(1 << 15)
 
-#  define SYS_CS_ML_BIT 	7
+#  define SYS_CS_ML_BIT		7
 #  define SYS_CS_ML_MASK	(0x7 << SYS_CS_ML_BIT)
 #  define SYS_CS_DL		(1 << 6)
 #  define SYS_CS_CL		(1 << 5)
@@ -1554,8 +1554,8 @@
 #define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16)
 #define PCI_MWMASKDEV_DEVID(x)	((x) & 0xffff)
 #define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16)
-#define PCI_MWBASEREVCCL_REV(x)  (((x) & 0xff) << 8)
-#define PCI_MWBASEREVCCL_CCL(x)  ((x) & 0xff)
+#define PCI_MWBASEREVCCL_REV(x)	 (((x) & 0xff) << 8)
+#define PCI_MWBASEREVCCL_CCL(x)	 ((x) & 0xff)
 #define PCI_ID_DID(x)		(((x) & 0xffff) << 16)
 #define PCI_ID_VID(x)		((x) & 0xffff)
 #define PCI_STATCMD_STATUS(x)	(((x) & 0xffff) << 16)
diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
index ba4cf0e..7cedca5 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000_dma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
@@ -34,7 +34,7 @@
 #include <linux/spinlock.h>	/* And spinlocks */
 #include <linux/delay.h>
 
-#define NUM_AU1000_DMA_CHANNELS	8
+#define NUM_AU1000_DMA_CHANNELS 8
 
 /* DMA Channel Register Offsets */
 #define DMA_MODE_SET		0x00000000
@@ -47,7 +47,7 @@
 #define DMA_DS			(1 << 15)
 #define DMA_BE			(1 << 13)
 #define DMA_DR			(1 << 12)
-#define DMA_TS8 		(1 << 11)
+#define DMA_TS8			(1 << 11)
 #define DMA_DW_BIT		9
 #define DMA_DW_MASK		(0x03 << DMA_DW_BIT)
 #define DMA_DW8			(0 << DMA_DW_BIT)
@@ -59,9 +59,9 @@
 #define DMA_GO			(1 << 5)
 #define DMA_AB			(1 << 4)
 #define DMA_D1			(1 << 3)
-#define DMA_BE1 		(1 << 2)
+#define DMA_BE1			(1 << 2)
 #define DMA_D0			(1 << 1)
-#define DMA_BE0 		(1 << 0)
+#define DMA_BE0			(1 << 0)
 
 #define DMA_PERIPHERAL_ADDR	0x00000008
 #define DMA_BUFFER0_START	0x0000000C
@@ -246,7 +246,7 @@
 		mode |= DMA_IE;
 
 	au_writel(~mode, chan->io + DMA_MODE_CLEAR);
-	au_writel(mode,  chan->io + DMA_MODE_SET);
+	au_writel(mode,	 chan->io + DMA_MODE_SET);
 }
 
 /*
diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
index e221659..cadab91 100644
--- a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
+++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
@@ -148,7 +148,7 @@
 /*
  *  SD_STATUS bit definitions.
  */
-#define SD_STATUS_DCRCW	(0x00000007)
+#define SD_STATUS_DCRCW (0x00000007)
 #define SD_STATUS_xx1	(0x00000008)
 #define SD_STATUS_CB	(0x00000010)
 #define SD_STATUS_DB	(0x00000020)
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
index 217810e..ca8077a 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -103,7 +103,7 @@
 	 * Lets have some SW data following -- make sure it's 32 bytes.
 	 */
 	u32	sw_status;
-	u32 	sw_context;
+	u32	sw_context;
 	u32	sw_reserved[6];
 } au1x_ddma_desc_t;
 
@@ -123,7 +123,7 @@
 #define DSCR_CMD0_CV		(0x1 << 2)	/* Clear Valid when done */
 #define DSCR_CMD0_ST_MASK	(0x3 << 0)	/* Status instruction */
 
-#define SW_STATUS_INUSE 	(1 << 0)
+#define SW_STATUS_INUSE		(1 << 0)
 
 /* Command 0 device IDs. */
 #define AU1550_DSCR_CMD0_UART0_TX	0
@@ -195,8 +195,8 @@
 #define AU1300_DSCR_CMD0_SDMS_RX0      9
 #define AU1300_DSCR_CMD0_SDMS_TX1      10
 #define AU1300_DSCR_CMD0_SDMS_RX1      11
-#define AU1300_DSCR_CMD0_AES_TX        12
-#define AU1300_DSCR_CMD0_AES_RX        13
+#define AU1300_DSCR_CMD0_AES_TX	       12
+#define AU1300_DSCR_CMD0_AES_RX	       13
 #define AU1300_DSCR_CMD0_PSC0_TX       14
 #define AU1300_DSCR_CMD0_PSC0_RX       15
 #define AU1300_DSCR_CMD0_PSC1_TX       16
@@ -205,12 +205,12 @@
 #define AU1300_DSCR_CMD0_PSC2_RX       19
 #define AU1300_DSCR_CMD0_PSC3_TX       20
 #define AU1300_DSCR_CMD0_PSC3_RX       21
-#define AU1300_DSCR_CMD0_LCD           22
+#define AU1300_DSCR_CMD0_LCD	       22
 #define AU1300_DSCR_CMD0_NAND_FLASH    23
 #define AU1300_DSCR_CMD0_SDMS_TX2      24
 #define AU1300_DSCR_CMD0_SDMS_RX2      25
 #define AU1300_DSCR_CMD0_CIM_SYNC      26
-#define AU1300_DSCR_CMD0_UDMA          27
+#define AU1300_DSCR_CMD0_UDMA	       27
 #define AU1300_DSCR_CMD0_DMA_REQ0      28
 #define AU1300_DSCR_CMD0_DMA_REQ1      29
 
@@ -298,7 +298,7 @@
 #define DSCR_NXTPTR_MS		(1 << 27)
 
 /* The number of DBDMA channels. */
-#define NUM_DBDMA_CHANS	16
+#define NUM_DBDMA_CHANS 16
 
 /*
  * DDMA API definitions
@@ -316,7 +316,7 @@
 
 
 typedef struct dbdma_chan_config {
-	spinlock_t      lock;
+	spinlock_t	lock;
 
 	u32			chan_flags;
 	u32			chan_index;
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
index e306384..bb91b89 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-mips/mach-au1x00/au1xxx_ide.h  version 01.30.00   Aug. 02 2005
+ * include/asm-mips/mach-au1x00/au1xxx_ide.h  version 01.30.00  Aug. 02 2005
  *
  * BRIEF MODULE DESCRIPTION
  * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
@@ -27,14 +27,14 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
- *       Interface and Linux Device Driver" Application Note.
+ *	 Interface and Linux Device Driver" Application Note.
  */
 
 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 #define DMA_WAIT_TIMEOUT	100
-#define NUM_DESCRIPTORS 	PRD_ENTRIES
+#define NUM_DESCRIPTORS		PRD_ENTRIES
 #else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
-#define NUM_DESCRIPTORS 	2
+#define NUM_DESCRIPTORS		2
 #endif
 
 #ifndef AU1XXX_ATA_RQSIZE
@@ -84,8 +84,8 @@
 #define TWP_MASK		(0x3F << 14)
 #define TCSW_MASK		(0x0F << 10)
 #define TPM_MASK		(0x0F << 6)
-#define TA_MASK 		(0x3F << 0)
-#define TS_MASK 		(1 << 8)
+#define TA_MASK			(0x3F << 0)
+#define TS_MASK			(1 << 8)
 
 /* Timing parameters PIO mode 0 */
 #define SBC_IDE_PIO0_TCSOE	(0x04 << 29)
@@ -96,7 +96,7 @@
 #define SBC_IDE_PIO0_TWP	(0x10 << 14)
 #define SBC_IDE_PIO0_TCSW	(0x04 << 10)
 #define SBC_IDE_PIO0_TPM	(0x00 << 6)
-#define SBC_IDE_PIO0_TA 	(0x15 << 0)
+#define SBC_IDE_PIO0_TA		(0x15 << 0)
 /* Timing parameters PIO mode 1 */
 #define SBC_IDE_PIO1_TCSOE	(0x03 << 29)
 #define SBC_IDE_PIO1_TOECS	(0x01 << 26)
@@ -106,7 +106,7 @@
 #define SBC_IDE_PIO1_TWP	(0x08 << 14)
 #define SBC_IDE_PIO1_TCSW	(0x03 << 10)
 #define SBC_IDE_PIO1_TPM	(0x00 << 6)
-#define SBC_IDE_PIO1_TA 	(0x0B << 0)
+#define SBC_IDE_PIO1_TA		(0x0B << 0)
 /* Timing parameters PIO mode 2 */
 #define SBC_IDE_PIO2_TCSOE	(0x05 << 29)
 #define SBC_IDE_PIO2_TOECS	(0x01 << 26)
@@ -116,7 +116,7 @@
 #define SBC_IDE_PIO2_TWP	(0x1F << 14)
 #define SBC_IDE_PIO2_TCSW	(0x05 << 10)
 #define SBC_IDE_PIO2_TPM	(0x00 << 6)
-#define SBC_IDE_PIO2_TA 	(0x22 << 0)
+#define SBC_IDE_PIO2_TA		(0x22 << 0)
 /* Timing parameters PIO mode 3 */
 #define SBC_IDE_PIO3_TCSOE	(0x05 << 29)
 #define SBC_IDE_PIO3_TOECS	(0x01 << 26)
@@ -126,7 +126,7 @@
 #define SBC_IDE_PIO3_TWP	(0x15 << 14)
 #define SBC_IDE_PIO3_TCSW	(0x05 << 10)
 #define SBC_IDE_PIO3_TPM	(0x00 << 6)
-#define SBC_IDE_PIO3_TA 	(0x1A << 0)
+#define SBC_IDE_PIO3_TA		(0x1A << 0)
 /* Timing parameters PIO mode 4 */
 #define SBC_IDE_PIO4_TCSOE	(0x04 << 29)
 #define SBC_IDE_PIO4_TOECS	(0x01 << 26)
@@ -136,7 +136,7 @@
 #define SBC_IDE_PIO4_TWP	(0x0D << 14)
 #define SBC_IDE_PIO4_TCSW	(0x03 << 10)
 #define SBC_IDE_PIO4_TPM	(0x00 << 6)
-#define SBC_IDE_PIO4_TA 	(0x12 << 0)
+#define SBC_IDE_PIO4_TA		(0x12 << 0)
 /* Timing parameters MDMA mode 0 */
 #define SBC_IDE_MDMA0_TCSOE	(0x03 << 29)
 #define SBC_IDE_MDMA0_TOECS	(0x01 << 26)
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
index 4e3f3bc..8a9cd75 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
@@ -53,7 +53,7 @@
 
 #define PSC_CTRL_DISABLE	0
 #define PSC_CTRL_SUSPEND	2
-#define PSC_CTRL_ENABLE 	3
+#define PSC_CTRL_ENABLE		3
 
 /* AC97 Registers. */
 #define PSC_AC97CFG_OFFSET	0x00000008
@@ -85,8 +85,8 @@
 #define PSC_AC97CFG_SE_ENABLE	(1 << 25)
 
 #define PSC_AC97CFG_LEN_MASK	(0xf << 21)
-#define PSC_AC97CFG_TXSLOT_MASK	(0x3ff << 11)
-#define PSC_AC97CFG_RXSLOT_MASK	(0x3ff << 1)
+#define PSC_AC97CFG_TXSLOT_MASK (0x3ff << 11)
+#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1)
 #define PSC_AC97CFG_GE_ENABLE	(1)
 
 /* Enable slots 3-12. */
@@ -95,7 +95,7 @@
 
 /*
  * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately.
- * The only sensible numbers are 7, 9, or possibly 11.  Nah, just do the
+ * The only sensible numbers are 7, 9, or possibly 11.	Nah, just do the
  * arithmetic in the macro.
  */
 #define PSC_AC97CFG_SET_LEN(x)	(((((x) - 2) / 2) & 0xf) << 21)
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 73853b5a..796afd0 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -12,14 +12,14 @@
 #include <asm/mach-au1x00/au1000.h>
 
 /* The default GPIO numberspace as documented in the Alchemy manuals.
- * GPIO0-31 from GPIO1 block,   GPIO200-215 from GPIO2 block.
+ * GPIO0-31 from GPIO1 block,	GPIO200-215 from GPIO2 block.
  */
 #define ALCHEMY_GPIO1_BASE	0
 #define ALCHEMY_GPIO2_BASE	200
 
 #define ALCHEMY_GPIO1_NUM	32
 #define ALCHEMY_GPIO2_NUM	16
-#define ALCHEMY_GPIO1_MAX 	(ALCHEMY_GPIO1_BASE + ALCHEMY_GPIO1_NUM - 1)
+#define ALCHEMY_GPIO1_MAX	(ALCHEMY_GPIO1_BASE + ALCHEMY_GPIO1_NUM - 1)
 #define ALCHEMY_GPIO2_MAX	(ALCHEMY_GPIO2_BASE + ALCHEMY_GPIO2_NUM - 1)
 
 #define MAKE_IRQ(intc, off)	(AU1000_INTC##intc##_INT_BASE + (off))
@@ -67,7 +67,7 @@
 	switch (gpio) {
 	case 0 ... 15:
 	case 20:
-	case 23 ... 28:	return MAKE_IRQ(1, gpio);
+	case 23 ... 28: return MAKE_IRQ(1, gpio);
 	}
 
 	return -ENXIO;
@@ -139,8 +139,8 @@
 
 	switch (gpio) {
 	case 0 ... 15:
-	case 20 ... 28:	return MAKE_IRQ(1, gpio);
-	case 16 ... 17:	return MAKE_IRQ(1, 18 + gpio - 16);
+	case 20 ... 28: return MAKE_IRQ(1, gpio);
+	case 16 ... 17: return MAKE_IRQ(1, 18 + gpio - 16);
 	}
 
 	return -ENXIO;
@@ -152,9 +152,9 @@
 
 	switch (gpio) {
 	case 0:		return MAKE_IRQ(1, 16);
-	case 1 ... 5:	return MAKE_IRQ(1, 17);	/* shared GPIO201_205 */
+	case 1 ... 5:	return MAKE_IRQ(1, 17); /* shared GPIO201_205 */
 	case 6 ... 7:	return MAKE_IRQ(1, 29 + gpio - 6);
-	case 8 ... 15:	return MAKE_IRQ(1, 31);	/* shared GPIO208_215 */
+	case 8 ... 15:	return MAKE_IRQ(1, 31); /* shared GPIO208_215 */
 	}
 
 	return -ENXIO;
@@ -190,7 +190,7 @@
 	case 0 ... 2:	return MAKE_IRQ(0, 5 + gpio - 0);
 	case 3:		return MAKE_IRQ(0, 22);
 	case 4 ... 7:	return MAKE_IRQ(0, 24 + gpio - 4);
-	case 8 ... 15:	return MAKE_IRQ(0, 28);	/* shared GPIO208_215 */
+	case 8 ... 15:	return MAKE_IRQ(0, 28); /* shared GPIO208_215 */
 	}
 
 	return -ENXIO;
@@ -428,7 +428,7 @@
 /**
  * alchemy_gpio2_enable -  Activate GPIO2 block.
  *
- * The GPIO2 block must be enabled excplicitly to work.  On systems
+ * The GPIO2 block must be enabled excplicitly to work.	 On systems
  * where this isn't done by the bootloader, this macro can be used.
  */
 static inline void alchemy_gpio2_enable(void)
@@ -533,7 +533,7 @@
  *	2 (1 for Au1000) gpio_chips are registered.
  *
  *(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
- *	the boards' gpio.h must provide	the linux gpio wrapper functions,
+ *	the boards' gpio.h must provide the linux gpio wrapper functions,
  *
  *(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
  *	inlinable gpio functions are provided which enable access to the
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
index fb9975c..ce02894 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
@@ -130,7 +130,7 @@
 *	A gpiochip for the 75 GPIOs is registered.
 *
 *(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
-*	the boards' gpio.h must provide	the linux gpio wrapper functions,
+*	the boards' gpio.h must provide the linux gpio wrapper functions,
 *
 *(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
 *	inlinable gpio functions are provided which enable access to the
diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
similarity index 84%
rename from arch/mips/include/asm/mach-bcm47xx/nvram.h
rename to arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
index 69ef3ef..b8e7be8 100644
--- a/arch/mips/include/asm/mach-bcm47xx/nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
@@ -8,8 +8,8 @@
  *  option) any later version.
  */
 
-#ifndef __NVRAM_H
-#define __NVRAM_H
+#ifndef __BCM47XX_NVRAM_H
+#define __BCM47XX_NVRAM_H
 
 #include <linux/types.h>
 #include <linux/kernel.h>
@@ -32,12 +32,9 @@
 #define NVRAM_MAX_VALUE_LEN 255
 #define NVRAM_MAX_PARAM_LEN 64
 
-#define NVRAM_ERR_INV_PARAM	-8
-#define NVRAM_ERR_ENVNOTFOUND	-9
+extern int bcm47xx_nvram_getenv(char *name, char *val, size_t val_len);
 
-extern int nvram_getenv(char *name, char *val, size_t val_len);
-
-static inline void nvram_parse_macaddr(char *buf, u8 macaddr[6])
+static inline void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6])
 {
 	if (strchr(buf, ':'))
 		sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0],
@@ -51,4 +48,4 @@
 		printk(KERN_WARNING "Can not parse mac address: %s\n", buf);
 }
 
-#endif
+#endif /* __BCM47XX_NVRAM_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
index dbd5b5a..cb922b9 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -182,7 +182,7 @@
 #define BCM_6328_PERF_BASE		(0xb0000000)
 #define BCM_6328_TIMER_BASE		(0xb0000040)
 #define BCM_6328_WDT_BASE		(0xb000005c)
-#define BCM_6328_UART0_BASE             (0xb0000100)
+#define BCM_6328_UART0_BASE		(0xb0000100)
 #define BCM_6328_UART1_BASE		(0xb0000120)
 #define BCM_6328_GPIO_BASE		(0xb0000080)
 #define BCM_6328_SPI_BASE		(0xdeadbeef)
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
index 03a54df..7033144 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
@@ -88,7 +88,7 @@
 #define bcm_mpi_readl(o)	bcm_rset_readl(RSET_MPI, (o))
 #define bcm_mpi_writel(v, o)	bcm_rset_writel(RSET_MPI, (v), (o))
 #define bcm_pcmcia_readl(o)	bcm_rset_readl(RSET_PCMCIA, (o))
-#define bcm_pcmcia_writel(v, o)	bcm_rset_writel(RSET_PCMCIA, (v), (o))
+#define bcm_pcmcia_writel(v, o) bcm_rset_writel(RSET_PCMCIA, (v), (o))
 #define bcm_pcie_readl(o)	bcm_rset_readl(RSET_PCIE, (o))
 #define bcm_pcie_writel(v, o)	bcm_rset_writel(RSET_PCIE, (v), (o))
 #define bcm_sdram_readl(o)	bcm_rset_readl(RSET_SDRAM, (o))
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_iudma.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_iudma.h
index a5bbff3..1e89df7 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_iudma.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_iudma.h
@@ -19,7 +19,7 @@
 #define DMADESC_SOP_MASK	(1 << 13)
 #define DMADESC_ESOP_MASK	(DMADESC_EOP_MASK | DMADESC_SOP_MASK)
 #define DMADESC_WRAP_MASK	(1 << 12)
-#define DMADESC_USB_NOZERO_MASK	(1 << 1)
+#define DMADESC_USB_NOZERO_MASK (1 << 1)
 #define DMADESC_USB_ZERO_MASK	(1 << 0)
 
 /* status */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
index c3eeb90..81b4702 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -143,7 +143,7 @@
 					CKCTL_6368_NAND_EN |		\
 					CKCTL_6368_IPSEC_EN)
 
-/* System PLL Control register  */
+/* System PLL Control register	*/
 #define PERF_SYS_PLL_CTL_REG		0x8
 #define SYS_PLL_SOFT_RESET		0x1
 
@@ -219,7 +219,7 @@
 #define SOFTRESET_6338_DMAMEM_MASK	(1 << 6)
 #define SOFTRESET_6338_SAR_MASK		(1 << 7)
 #define SOFTRESET_6338_ACLC_MASK	(1 << 8)
-#define SOFTRESET_6338_ADSLMIPSPLL_MASK	(1 << 10)
+#define SOFTRESET_6338_ADSLMIPSPLL_MASK (1 << 10)
 #define SOFTRESET_6338_ALL	 (SOFTRESET_6338_SPI_MASK |		\
 				  SOFTRESET_6338_ENET_MASK |		\
 				  SOFTRESET_6338_USBH_MASK |		\
@@ -238,7 +238,7 @@
 #define SOFTRESET_6348_DMAMEM_MASK	(1 << 6)
 #define SOFTRESET_6348_SAR_MASK		(1 << 7)
 #define SOFTRESET_6348_ACLC_MASK	(1 << 8)
-#define SOFTRESET_6348_ADSLMIPSPLL_MASK	(1 << 10)
+#define SOFTRESET_6348_ADSLMIPSPLL_MASK (1 << 10)
 
 #define SOFTRESET_6348_ALL	 (SOFTRESET_6348_SPI_MASK |		\
 				  SOFTRESET_6348_ENET_MASK |		\
@@ -560,7 +560,7 @@
 
 
 #define GPIO_PINMUX_OTHR_REG		0x24
-#define GPIO_PINMUX_OTHR_6328_USB_SHIFT	12
+#define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
 #define GPIO_PINMUX_OTHR_6328_USB_MASK	(3 << GPIO_PINMUX_OTHR_6328_USB_SHIFT)
 #define GPIO_PINMUX_OTHR_6328_USB_HOST	(1 << GPIO_PINMUX_OTHR_6328_USB_SHIFT)
 #define GPIO_PINMUX_OTHR_6328_USB_DEV	(2 << GPIO_PINMUX_OTHR_6328_USB_SHIFT)
@@ -572,12 +572,12 @@
 /* those bits must be kept as read in gpio basemode register*/
 
 #define GPIO_STRAPBUS_REG		0x40
-#define STRAPBUS_6358_BOOT_SEL_PARALLEL	(1 << 1)
+#define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
 #define STRAPBUS_6358_BOOT_SEL_SERIAL	(0 << 1)
 #define STRAPBUS_6368_BOOT_SEL_MASK	0x3
 #define STRAPBUS_6368_BOOT_SEL_NAND	0
 #define STRAPBUS_6368_BOOT_SEL_SERIAL	1
-#define STRAPBUS_6368_BOOT_SEL_PARALLEL	3
+#define STRAPBUS_6368_BOOT_SEL_PARALLEL 3
 
 
 /*************************************************************************
@@ -812,7 +812,7 @@
 #define USBH_PRIV_SWAP_OHCI_DATA_MASK	(1 << USBH_PRIV_SWAP_OHCI_DATA_SHIFT)
 
 #define USBH_PRIV_UTMI_CTL_6368_REG	0x10
-#define USBH_PRIV_UTMI_CTL_NODRIV_SHIFT	12
+#define USBH_PRIV_UTMI_CTL_NODRIV_SHIFT 12
 #define USBH_PRIV_UTMI_CTL_NODRIV_MASK	(0xf << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT)
 #define USBH_PRIV_UTMI_CTL_HOSTB_SHIFT	0
 #define USBH_PRIV_UTMI_CTL_HOSTB_MASK	(0xf << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT)
@@ -841,7 +841,7 @@
 #define USBD_CONTROL_INIT_SEL_MASK	(0xf << USBD_CONTROL_INIT_SEL_SHIFT)
 #define USBD_CONTROL_FIFO_RESET_SHIFT	6
 #define USBD_CONTROL_FIFO_RESET_MASK	(3 << USBD_CONTROL_FIFO_RESET_SHIFT)
-#define USBD_CONTROL_SETUPERRLOCK_SHIFT	5
+#define USBD_CONTROL_SETUPERRLOCK_SHIFT 5
 #define USBD_CONTROL_SETUPERRLOCK_MASK	(1 << USBD_CONTROL_SETUPERRLOCK_SHIFT)
 #define USBD_CONTROL_DONE_CSRS_SHIFT	0
 #define USBD_CONTROL_DONE_CSRS_MASK	(1 << USBD_CONTROL_DONE_CSRS_SHIFT)
@@ -852,7 +852,7 @@
 #define USBD_STRAPS_APP_SELF_PWR_MASK	(1 << USBD_STRAPS_APP_SELF_PWR_SHIFT)
 #define USBD_STRAPS_APP_DISCON_SHIFT	9
 #define USBD_STRAPS_APP_DISCON_MASK	(1 << USBD_STRAPS_APP_DISCON_SHIFT)
-#define USBD_STRAPS_APP_CSRPRGSUP_SHIFT	8
+#define USBD_STRAPS_APP_CSRPRGSUP_SHIFT 8
 #define USBD_STRAPS_APP_CSRPRGSUP_MASK	(1 << USBD_STRAPS_APP_CSRPRGSUP_SHIFT)
 #define USBD_STRAPS_APP_RMTWKUP_SHIFT	6
 #define USBD_STRAPS_APP_RMTWKUP_MASK	(1 << USBD_STRAPS_APP_RMTWKUP_SHIFT)
@@ -943,7 +943,7 @@
 #define USBD_EPNUM_TYPEMAP_REG		0x50
 #define USBD_EPNUM_TYPEMAP_TYPE_SHIFT	8
 #define USBD_EPNUM_TYPEMAP_TYPE_MASK	(0x3 << USBD_EPNUM_TYPEMAP_TYPE_SHIFT)
-#define USBD_EPNUM_TYPEMAP_DMA_CH_SHIFT	0
+#define USBD_EPNUM_TYPEMAP_DMA_CH_SHIFT 0
 #define USBD_EPNUM_TYPEMAP_DMA_CH_MASK	(0xf << USBD_EPNUM_TYPEMAP_DMACH_SHIFT)
 
 /* Misc per-endpoint settings */
@@ -1048,8 +1048,8 @@
 #define MPI_L2PREMAP_IS_CARDBUS_MASK	(1 << 2)
 
 #define MPI_PCIMODESEL_REG		0x144
-#define MPI_PCIMODESEL_BAR1_NOSWAP_MASK	(1 << 0)
-#define MPI_PCIMODESEL_BAR2_NOSWAP_MASK	(1 << 1)
+#define MPI_PCIMODESEL_BAR1_NOSWAP_MASK (1 << 0)
+#define MPI_PCIMODESEL_BAR2_NOSWAP_MASK (1 << 1)
 #define MPI_PCIMODESEL_EXT_ARB_MASK	(1 << 2)
 #define MPI_PCIMODESEL_PREFETCH_SHIFT	4
 #define MPI_PCIMODESEL_PREFETCH_MASK	(0xf << MPI_PCIMODESEL_PREFETCH_SHIFT)
diff --git a/arch/mips/include/asm/mach-bcm63xx/irq.h b/arch/mips/include/asm/mach-bcm63xx/irq.h
index 9332e78..2bbfc8d 100644
--- a/arch/mips/include/asm/mach-bcm63xx/irq.h
+++ b/arch/mips/include/asm/mach-bcm63xx/irq.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MACH_BCM63XX_IRQ_H
 #define __ASM_MACH_BCM63XX_IRQ_H
 
-#define NR_IRQS	128
+#define NR_IRQS 128
 #define MIPS_CPU_IRQ_BASE 0
 
 #endif
diff --git a/arch/mips/include/asm/mach-cavium-octeon/irq.h b/arch/mips/include/asm/mach-cavium-octeon/irq.h
index 502bb18..60fc4c3 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/irq.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/irq.h
@@ -51,8 +51,8 @@
 /* 256 - 511 represent the MSI interrupts 0-255 */
 #define OCTEON_IRQ_MSI_BIT0	(256)
 
-#define OCTEON_IRQ_MSI_LAST      (OCTEON_IRQ_MSI_BIT0 + 255)
-#define OCTEON_IRQ_LAST          (OCTEON_IRQ_MSI_LAST + 1)
+#define OCTEON_IRQ_MSI_LAST	 (OCTEON_IRQ_MSI_BIT0 + 255)
+#define OCTEON_IRQ_LAST		 (OCTEON_IRQ_MSI_LAST + 1)
 #endif
 
 #endif
diff --git a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
index dedef7d..1e7dbb1 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
@@ -16,7 +16,7 @@
 #define CP0_PRID_OCTEON_PASS1 0x000d0000
 #define CP0_PRID_OCTEON_CN30XX 0x000d0200
 
-.macro  kernel_entry_setup
+.macro	kernel_entry_setup
 	# Registers set by bootloader:
 	# (only 32 bits set by bootloader, all addresses are physical
 	# addresses, and need to have the appropriate memory region set
@@ -28,12 +28,12 @@
 	.set push
 	.set arch=octeon
 	# Read the cavium mem control register
-	dmfc0   v0, CP0_CVMMEMCTL_REG
+	dmfc0	v0, CP0_CVMMEMCTL_REG
 	# Clear the lower 6 bits, the CVMSEG size
-	dins    v0, $0, 0, 6
-	ori     v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
-	dmtc0   v0, CP0_CVMMEMCTL_REG	# Write the cavium mem control register
-	dmfc0   v0, CP0_CVMCTL_REG	# Read the cavium control register
+	dins	v0, $0, 0, 6
+	ori	v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
+	dmtc0	v0, CP0_CVMMEMCTL_REG	# Write the cavium mem control register
+	dmfc0	v0, CP0_CVMCTL_REG	# Read the cavium control register
 #ifdef CONFIG_CAVIUM_OCTEON_HW_FIX_UNALIGNED
 	# Disable unaligned load/store support but leave HW fixup enabled
 	or  v0, v0, 0x5001
@@ -69,14 +69,14 @@
 	and	v0, v0, v1
 	ori	v0, v0, (6 << 7)
 	# Write the cavium control register
-	dmtc0   v0, CP0_CVMCTL_REG
+	dmtc0	v0, CP0_CVMCTL_REG
 	sync
 	# Flush dcache after config change
-	cache   9, 0($0)
+	cache	9, 0($0)
 	# Get my core id
-	rdhwr   v0, $0
+	rdhwr	v0, $0
 	# Jump the master to kernel_entry
-	bne     a2, zero, octeon_main_processor
+	bne	a2, zero, octeon_main_processor
 	nop
 
 #ifdef CONFIG_SMP
@@ -87,21 +87,21 @@
 	#
 
 	# This is the variable where the next core to boot os stored
-	PTR_LA  t0, octeon_processor_boot
+	PTR_LA	t0, octeon_processor_boot
 octeon_spin_wait_boot:
 	# Get the core id of the next to be booted
-	LONG_L  t1, (t0)
+	LONG_L	t1, (t0)
 	# Keep looping if it isn't me
 	bne t1, v0, octeon_spin_wait_boot
 	nop
 	# Get my GP from the global variable
-	PTR_LA  t0, octeon_processor_gp
-	LONG_L  gp, (t0)
+	PTR_LA	t0, octeon_processor_gp
+	LONG_L	gp, (t0)
 	# Get my SP from the global variable
-	PTR_LA  t0, octeon_processor_sp
-	LONG_L  sp, (t0)
+	PTR_LA	t0, octeon_processor_sp
+	LONG_L	sp, (t0)
 	# Set the SP global variable to zero so the master knows we've started
-	LONG_S  zero, (t0)
+	LONG_S	zero, (t0)
 #ifdef __OCTEON__
 	syncw
 	syncw
@@ -130,7 +130,7 @@
 /*
  * Do SMP slave processor setup necessary before we can savely execute C code.
  */
-	.macro  smp_slave_setup
+	.macro	smp_slave_setup
 	.endm
 
 #endif /* __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h
index babc837..71d4bfa 100644
--- a/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h
@@ -32,9 +32,9 @@
 #define cpu_scache_line_size()	0
 
 #ifdef CONFIG_64BIT
-#define cpu_has_llsc            0
+#define cpu_has_llsc		0
 #else
-#define cpu_has_llsc            1
+#define cpu_has_llsc		1
 #endif
 
 #define cpu_has_mips16		0
diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
index f8afec3..6fe475b 100644
--- a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
+++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2006  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2006	Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/mach-db1x00/bcsr.h b/arch/mips/include/asm/mach-db1x00/bcsr.h
index 16f1cf5..3c3ed4a 100644
--- a/arch/mips/include/asm/mach-db1x00/bcsr.h
+++ b/arch/mips/include/asm/mach-db1x00/bcsr.h
@@ -110,7 +110,7 @@
 	BCSR_WHOAMI_DB1300,
 };
 
-/* STATUS reg.  Unless otherwise noted, they're valid on all boards.
+/* STATUS reg.	Unless otherwise noted, they're valid on all boards.
  * PB1200 = DB1200.
  */
 #define BCSR_STATUS_PC0VS		0x0003
@@ -190,7 +190,7 @@
 #define BCSR_RESETS_OTPWRPROT		0x1000	/* DB1300 */
 #define BCSR_RESETS_OTPCSB		0x2000	/* DB1300 */
 #define BCSR_RESETS_OTGPWR		0x4000	/* DB1300 */
-#define BCSR_RESETS_USBHPWR		0x8000  /* DB1300 */
+#define BCSR_RESETS_USBHPWR		0x8000	/* DB1300 */
 
 #define BCSR_BOARD_LCDVEE		0x0001
 #define BCSR_BOARD_LCDVDD		0x0002
diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h
index b2a8319..d3cce73 100644
--- a/arch/mips/include/asm/mach-db1x00/db1200.h
+++ b/arch/mips/include/asm/mach-db1x00/db1200.h
@@ -63,7 +63,7 @@
  * the interrupt define and subtracting the DB1200_INT_BEGIN value.
  *
  *   Example: IDE bis pos is  = 64 - 64
- *            ETH bit pos is  = 65 - 64
+ *	      ETH bit pos is  = 65 - 64
  */
 enum external_db1200_ints {
 	DB1200_INT_BEGIN	= AU1000_MAX_INTR + 1,
diff --git a/arch/mips/include/asm/mach-db1x00/db1300.h b/arch/mips/include/asm/mach-db1x00/db1300.h
index 7fe5fb3..3d1ede4 100644
--- a/arch/mips/include/asm/mach-db1x00/db1300.h
+++ b/arch/mips/include/asm/mach-db1x00/db1300.h
@@ -21,7 +21,7 @@
 #define DB1300_SD1_INSERT_INT	(DB1300_FIRST_INT + 12)
 #define DB1300_SD1_EJECT_INT	(DB1300_FIRST_INT + 13)
 #define DB1300_OTG_VBUS_OC_INT	(DB1300_FIRST_INT + 14)
-#define DB1300_HOST_VBUS_OC_INT	(DB1300_FIRST_INT + 15)
+#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15)
 #define DB1300_LAST_INT		(DB1300_FIRST_INT + 15)
 
 /* SMSC9210 CS */
diff --git a/arch/mips/include/asm/mach-emma2rh/irq.h b/arch/mips/include/asm/mach-emma2rh/irq.h
index 5439eb8..2f7155d 100644
--- a/arch/mips/include/asm/mach-emma2rh/irq.h
+++ b/arch/mips/include/asm/mach-emma2rh/irq.h
@@ -8,7 +8,7 @@
 #ifndef __ASM_MACH_EMMA2RH_IRQ_H
 #define __ASM_MACH_EMMA2RH_IRQ_H
 
-#define NR_IRQS	256
+#define NR_IRQS 256
 
 #include_next <irq.h>
 
diff --git a/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h
index 7c185bb..42be9e9 100644
--- a/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h
@@ -8,6 +8,6 @@
 #ifndef __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
 #define __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
 
-/* Intentionally empty file ...  */
+/* Intentionally empty file ...	 */
 
 #endif /* __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-generic/floppy.h b/arch/mips/include/asm/mach-generic/floppy.h
index a38f4d4..5b5cd68 100644
--- a/arch/mips/include/asm/mach-generic/floppy.h
+++ b/arch/mips/include/asm/mach-generic/floppy.h
@@ -98,7 +98,7 @@
 static inline int fd_request_irq(void)
 {
 	return request_irq(FLOPPY_IRQ, floppy_interrupt,
-	                   0, "floppy", NULL);
+			   0, "floppy", NULL);
 }
 
 static inline void fd_free_irq(void)
@@ -106,7 +106,7 @@
 	free_irq(FLOPPY_IRQ, NULL);
 }
 
-#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);
+#define fd_free_irq()		free_irq(FLOPPY_IRQ, NULL);
 
 
 static inline unsigned long fd_getfdaddr1(void)
diff --git a/arch/mips/include/asm/mach-generic/ide.h b/arch/mips/include/asm/mach-generic/ide.h
index 9c93a5b..affa66f 100644
--- a/arch/mips/include/asm/mach-generic/ide.h
+++ b/arch/mips/include/asm/mach-generic/ide.h
@@ -51,7 +51,7 @@
 /*
  * insw() and gang might be called with interrupts disabled, so we can't
  * send IPIs for flushing due to the potencial of deadlocks, see the comment
- * above smp_call_function() in arch/mips/kernel/smp.c.  We work around the
+ * above smp_call_function() in arch/mips/kernel/smp.c.	 We work around the
  * problem by disabling preemption so we know we actually perform the flush
  * on the processor that actually has the lines to be flushed which hopefully
  * is even better for performance anyway.
@@ -123,7 +123,7 @@
 	__ide_flush_epilogue();
 }
 
-/* ide_insw calls insw, not __ide_insw.  Why? */
+/* ide_insw calls insw, not __ide_insw.	 Why? */
 #undef insw
 #undef insl
 #undef outsw
diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h
index e014264..139cd20 100644
--- a/arch/mips/include/asm/mach-generic/irq.h
+++ b/arch/mips/include/asm/mach-generic/irq.h
@@ -9,12 +9,12 @@
 #define __ASM_MACH_GENERIC_IRQ_H
 
 #ifndef NR_IRQS
-#define NR_IRQS	128
+#define NR_IRQS 128
 #endif
 
 #ifdef CONFIG_I8259
 #ifndef I8259A_IRQ_BASE
-#define I8259A_IRQ_BASE	0
+#define I8259A_IRQ_BASE 0
 #endif
 #endif
 
diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h
index d7a9efd..73d717a 100644
--- a/arch/mips/include/asm/mach-generic/spaces.h
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -69,7 +69,7 @@
 #define HIGHMEM_START		(_AC(1, UL) << _AC(59, UL))
 #endif
 
-#define TO_PHYS(x)		(             ((x) & TO_PHYS_MASK))
+#define TO_PHYS(x)		(	      ((x) & TO_PHYS_MASK))
 #define TO_CAC(x)		(CAC_BASE   | ((x) & TO_PHYS_MASK))
 #define TO_UNCAC(x)		(UNCAC_BASE | ((x) & TO_PHYS_MASK))
 
diff --git a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
index 624d66c..a323efb 100644
--- a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
@@ -51,8 +51,8 @@
 	 * We might not get launched at the address the kernel is linked to,
 	 * so we jump there.
 	 */
-	PTR_LA  t0, 0f
-	jr      t0
+	PTR_LA	t0, 0f
+	jr	t0
 0:
 	.endm
 
diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h
index 986a3b9..ebc9377 100644
--- a/arch/mips/include/asm/mach-ip27/mmzone.h
+++ b/arch/mips/include/asm/mach-ip27/mmzone.h
@@ -7,7 +7,7 @@
 
 #define pa_to_nid(addr)		NASID_TO_COMPACT_NODEID(NASID_GET(addr))
 
-#define LEVELS_PER_SLICE        128
+#define LEVELS_PER_SLICE	128
 
 struct slice_data {
 	unsigned long irq_enable_mask[2];
diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
index b2cf641..defd135 100644
--- a/arch/mips/include/asm/mach-ip27/topology.h
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -34,7 +34,7 @@
 
 extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
 
-#define node_distance(from, to)	(__node_distances[(from)][(to)])
+#define node_distance(from, to) (__node_distances[(from)][(to)])
 
 #include <asm-generic/topology.h>
 
diff --git a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
index 50d344c..65e9c85 100644
--- a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
@@ -28,7 +28,7 @@
 #define cpu_has_ic_fills_f_dc	0
 #define cpu_has_dsp		0
 #define cpu_has_dsp2		0
-#define cpu_icache_snoops_remote_store  1
+#define cpu_icache_snoops_remote_store	1
 #define cpu_has_mipsmt		0
 #define cpu_has_userlocal	0
 
diff --git a/arch/mips/include/asm/mach-ip28/spaces.h b/arch/mips/include/asm/mach-ip28/spaces.h
index 05aabb2..5edf05d 100644
--- a/arch/mips/include/asm/mach-ip28/spaces.h
+++ b/arch/mips/include/asm/mach-ip28/spaces.h
@@ -6,7 +6,7 @@
  * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
  * Copyright (C) 2000, 2002  Maciej W. Rozycki
  * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
- * 2004	pf
+ * 2004 pf
  */
 #ifndef _ASM_MACH_IP28_SPACES_H
 #define _ASM_MACH_IP28_SPACES_H
diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h
index c8fb5aa..073f0c4 100644
--- a/arch/mips/include/asm/mach-ip32/dma-coherence.h
+++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h
@@ -50,7 +50,7 @@
 	return pa;
 }
 
-/* This is almost certainly wrong but it's what dma-ip32.c used to use  */
+/* This is almost certainly wrong but it's what dma-ip32.c used to use	*/
 static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
 	dma_addr_t dma_addr)
 {
diff --git a/arch/mips/include/asm/mach-ip32/war.h b/arch/mips/include/asm/mach-ip32/war.h
index 7237a93..9807ecd 100644
--- a/arch/mips/include/asm/mach-ip32/war.h
+++ b/arch/mips/include/asm/mach-ip32/war.h
@@ -17,7 +17,7 @@
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define ICACHE_REFILLS_WORKAROUND_WAR   1
+#define ICACHE_REFILLS_WORKAROUND_WAR	1
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0
 
diff --git a/arch/mips/include/asm/mach-jazz/floppy.h b/arch/mips/include/asm/mach-jazz/floppy.h
index 88b5acb..62aa1e2 100644
--- a/arch/mips/include/asm/mach-jazz/floppy.h
+++ b/arch/mips/include/asm/mach-jazz/floppy.h
@@ -90,7 +90,7 @@
 static inline int fd_request_irq(void)
 {
 	return request_irq(FLOPPY_IRQ, floppy_interrupt,
-	                   0, "floppy", NULL);
+			   0, "floppy", NULL);
 }
 
 static inline void fd_free_irq(void)
diff --git a/arch/mips/include/asm/mach-jz4740/clock.h b/arch/mips/include/asm/mach-jz4740/clock.h
index 1b7408d..16659cd 100644
--- a/arch/mips/include/asm/mach-jz4740/clock.h
+++ b/arch/mips/include/asm/mach-jz4740/clock.h
@@ -2,7 +2,7 @@
  *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/include/asm/mach-jz4740/dma.h b/arch/mips/include/asm/mach-jz4740/dma.h
index a3be121..98b4e7c 100644
--- a/arch/mips/include/asm/mach-jz4740/dma.h
+++ b/arch/mips/include/asm/mach-jz4740/dma.h
@@ -3,7 +3,7 @@
  *  JZ7420/JZ4740 DMA definitions
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
@@ -40,9 +40,9 @@
 };
 
 enum jz4740_dma_transfer_size {
-	JZ4740_DMA_TRANSFER_SIZE_4BYTE  = 0,
-	JZ4740_DMA_TRANSFER_SIZE_1BYTE  = 1,
-	JZ4740_DMA_TRANSFER_SIZE_2BYTE  = 2,
+	JZ4740_DMA_TRANSFER_SIZE_4BYTE	= 0,
+	JZ4740_DMA_TRANSFER_SIZE_1BYTE	= 1,
+	JZ4740_DMA_TRANSFER_SIZE_2BYTE	= 2,
 	JZ4740_DMA_TRANSFER_SIZE_16BYTE = 3,
 	JZ4740_DMA_TRANSFER_SIZE_32BYTE = 4,
 };
@@ -87,4 +87,4 @@
 void jz4740_dma_set_complete_cb(struct jz4740_dma_chan *dma,
 	jz4740_dma_complete_callback_t cb);
 
-#endif  /* __ASM_JZ4740_DMA_H__ */
+#endif	/* __ASM_JZ4740_DMA_H__ */
diff --git a/arch/mips/include/asm/mach-jz4740/gpio.h b/arch/mips/include/asm/mach-jz4740/gpio.h
index 1a6482e..eaacba7 100644
--- a/arch/mips/include/asm/mach-jz4740/gpio.h
+++ b/arch/mips/include/asm/mach-jz4740/gpio.h
@@ -198,7 +198,7 @@
 #define JZ_GPIO_FUNC_MEM_ADDR14		JZ_GPIO_FUNC1
 #define JZ_GPIO_FUNC_MEM_ADDR15		JZ_GPIO_FUNC1
 #define JZ_GPIO_FUNC_MEM_ADDR16		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_CLS	        JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_CLS		JZ_GPIO_FUNC1
 #define JZ_GPIO_FUNC_LCD_SPL		JZ_GPIO_FUNC1
 #define JZ_GPIO_FUNC_MEM_DCS		JZ_GPIO_FUNC1
 #define JZ_GPIO_FUNC_MEM_RAS		JZ_GPIO_FUNC1
diff --git a/arch/mips/include/asm/mach-jz4740/irq.h b/arch/mips/include/asm/mach-jz4740/irq.h
index 5ad1a9c..df50736 100644
--- a/arch/mips/include/asm/mach-jz4740/irq.h
+++ b/arch/mips/include/asm/mach-jz4740/irq.h
@@ -3,7 +3,7 @@
  *  JZ4740 IRQ definitions
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/include/asm/mach-jz4740/platform.h b/arch/mips/include/asm/mach-jz4740/platform.h
index 163e81d..72cfebd 100644
--- a/arch/mips/include/asm/mach-jz4740/platform.h
+++ b/arch/mips/include/asm/mach-jz4740/platform.h
@@ -3,7 +3,7 @@
  *  JZ4740 platform device definitions
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/include/asm/mach-jz4740/timer.h b/arch/mips/include/asm/mach-jz4740/timer.h
index a7759fb..8750a1d 100644
--- a/arch/mips/include/asm/mach-jz4740/timer.h
+++ b/arch/mips/include/asm/mach-jz4740/timer.h
@@ -3,7 +3,7 @@
  *  JZ4740 platform timer support
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
index fccac35..98d6a2f 100644
--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
@@ -44,7 +44,7 @@
 
 /* BOOT_SEL - find what boot media we have */
 #define BS_FLASH		0x1
-#define BS_SPI                  0x4
+#define BS_SPI			0x4
 
 /* global register ranges */
 extern __iomem void *ltq_ebu_membase;
diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
index 5e8a6e9..f196cce 100644
--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
@@ -34,6 +34,7 @@
 extern void ltq_disable_irq(struct irq_data *data);
 extern void ltq_mask_and_ack_irq(struct irq_data *data);
 extern void ltq_enable_irq(struct irq_data *data);
+extern int ltq_eiu_get_irq(int exin);
 
 /* clock handling */
 extern int clk_activate(struct clk *clk);
@@ -41,6 +42,7 @@
 extern struct clk *clk_get_cpu(void);
 extern struct clk *clk_get_fpi(void);
 extern struct clk *clk_get_io(void);
+extern struct clk *clk_get_ppe(void);
 
 /* find out what bootsource we have */
 extern unsigned char ltq_boot_select(void);
diff --git a/arch/mips/include/asm/mach-lantiq/war.h b/arch/mips/include/asm/mach-lantiq/war.h
index b6c568c..358ca97 100644
--- a/arch/mips/include/asm/mach-lantiq/war.h
+++ b/arch/mips/include/asm/mach-lantiq/war.h
@@ -7,17 +7,17 @@
 #ifndef __ASM_MIPS_MACH_LANTIQ_WAR_H
 #define __ASM_MIPS_MACH_LANTIQ_WAR_H
 
-#define R4600_V1_INDEX_ICACHEOP_WAR     0
-#define R4600_V1_HIT_CACHEOP_WAR        0
-#define R4600_V2_HIT_CACHEOP_WAR        0
-#define R5432_CP0_INTERRUPT_WAR         0
-#define BCM1250_M3_WAR                  0
-#define SIBYTE_1956_WAR                 0
-#define MIPS4K_ICACHE_REFILL_WAR        0
-#define MIPS_CACHE_SYNC_WAR             0
-#define TX49XX_ICACHE_INDEX_INV_WAR     0
-#define ICACHE_REFILLS_WORKAROUND_WAR   0
-#define R10000_LLSC_WAR                 0
-#define MIPS34K_MISSED_ITLB_WAR         0
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
 
 #endif
diff --git a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
index 872943a..5f8693d 100644
--- a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
@@ -21,7 +21,7 @@
 #define LTQ_DESC_SIZE		0x08	/* each descriptor is 64bit */
 #define LTQ_DESC_NUM		0x40	/* 64 descriptors / channel */
 
-#define LTQ_DMA_OWN		BIT(31)	/* owner bit */
+#define LTQ_DMA_OWN		BIT(31) /* owner bit */
 #define LTQ_DMA_C		BIT(30) /* complete bit */
 #define LTQ_DMA_SOP		BIT(29) /* start of packet */
 #define LTQ_DMA_EOP		BIT(28) /* end of packet */
@@ -38,7 +38,7 @@
 	int nr;				/* the channel number */
 	int irq;			/* the mapped irq */
 	int desc;			/* the current descriptor */
-	struct ltq_dma_desc *desc_base;	/* the descriptor base */
+	struct ltq_dma_desc *desc_base; /* the descriptor base */
 	int phys;			/* physical addr */
 };
 
diff --git a/arch/mips/include/asm/mach-lasat/mach-gt64120.h b/arch/mips/include/asm/mach-lasat/mach-gt64120.h
index 1a9ad45..c253d3fa5 100644
--- a/arch/mips/include/asm/mach-lasat/mach-gt64120.h
+++ b/arch/mips/include/asm/mach-lasat/mach-gt64120.h
@@ -1,6 +1,6 @@
 /*
  *  This is a direct copy of the ev96100.h file, with a global
- * search and replace.  The numbers are the same.
+ * search and replace.	The numbers are the same.
  *
  *  The reason I'm duplicating this is so that the 64120/96100
  * defines won't be confusing in the source code.
@@ -18,8 +18,8 @@
  *
  *   (Guessing ...)
  */
-#define GT_PCI_MEM_BASE	0x12000000UL
-#define GT_PCI_MEM_SIZE	0x02000000UL
+#define GT_PCI_MEM_BASE 0x12000000UL
+#define GT_PCI_MEM_SIZE 0x02000000UL
 #define GT_PCI_IO_BASE	0x10000000UL
 #define GT_PCI_IO_SIZE	0x02000000UL
 #define GT_ISA_IO_BASE	PCI_IO_BASE
diff --git a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
index 1a05d85..75fd8c0 100644
--- a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
@@ -8,9 +8,9 @@
  * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
  *
  * reference: /proc/cpuinfo,
- * 	arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
- * 	arch/mips/kernel/proc.c(show_cpuinfo),
- *      loongson2f user manual.
+ *	arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ *	arch/mips/kernel/proc.c(show_cpuinfo),
+ *	loongson2f user manual.
  */
 
 #ifndef __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H
@@ -37,7 +37,7 @@
 #define cpu_has_fpu		1
 #define cpu_has_ic_fills_f_dc	0
 #define cpu_has_inclusive_pcaches	1
-#define cpu_has_llsc 		1
+#define cpu_has_llsc		1
 #define cpu_has_mcheck		0
 #define cpu_has_mdmx		0
 #define cpu_has_mips16		0
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h
index 2a8e2bb5..a0ee0cb 100644
--- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h
+++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h
@@ -5,8 +5,8 @@
  * Author : jlliu <liujl@lemote.com>
  */
 
-#ifndef	_CS5536_H
-#define	_CS5536_H
+#ifndef _CS5536_H
+#define _CS5536_H
 
 #include <linux/types.h>
 
@@ -16,237 +16,237 @@
 /*
  * MSR module base
  */
-#define	CS5536_SB_MSR_BASE	(0x00000000)
-#define	CS5536_GLIU_MSR_BASE	(0x10000000)
-#define	CS5536_ILLEGAL_MSR_BASE	(0x20000000)
-#define	CS5536_USB_MSR_BASE	(0x40000000)
-#define	CS5536_IDE_MSR_BASE	(0x60000000)
-#define	CS5536_DIVIL_MSR_BASE	(0x80000000)
-#define	CS5536_ACC_MSR_BASE	(0xa0000000)
-#define	CS5536_UNUSED_MSR_BASE	(0xc0000000)
-#define	CS5536_GLCP_MSR_BASE	(0xe0000000)
+#define CS5536_SB_MSR_BASE	(0x00000000)
+#define CS5536_GLIU_MSR_BASE	(0x10000000)
+#define CS5536_ILLEGAL_MSR_BASE (0x20000000)
+#define CS5536_USB_MSR_BASE	(0x40000000)
+#define CS5536_IDE_MSR_BASE	(0x60000000)
+#define CS5536_DIVIL_MSR_BASE	(0x80000000)
+#define CS5536_ACC_MSR_BASE	(0xa0000000)
+#define CS5536_UNUSED_MSR_BASE	(0xc0000000)
+#define CS5536_GLCP_MSR_BASE	(0xe0000000)
 
-#define	SB_MSR_REG(offset)	(CS5536_SB_MSR_BASE	| (offset))
-#define	GLIU_MSR_REG(offset)	(CS5536_GLIU_MSR_BASE	| (offset))
-#define	ILLEGAL_MSR_REG(offset)	(CS5536_ILLEGAL_MSR_BASE | (offset))
-#define	USB_MSR_REG(offset)	(CS5536_USB_MSR_BASE	| (offset))
-#define	IDE_MSR_REG(offset)	(CS5536_IDE_MSR_BASE	| (offset))
-#define	DIVIL_MSR_REG(offset)	(CS5536_DIVIL_MSR_BASE	| (offset))
-#define	ACC_MSR_REG(offset)	(CS5536_ACC_MSR_BASE	| (offset))
-#define	UNUSED_MSR_REG(offset)	(CS5536_UNUSED_MSR_BASE	| (offset))
-#define	GLCP_MSR_REG(offset)	(CS5536_GLCP_MSR_BASE	| (offset))
+#define SB_MSR_REG(offset)	(CS5536_SB_MSR_BASE	| (offset))
+#define GLIU_MSR_REG(offset)	(CS5536_GLIU_MSR_BASE	| (offset))
+#define ILLEGAL_MSR_REG(offset) (CS5536_ILLEGAL_MSR_BASE | (offset))
+#define USB_MSR_REG(offset)	(CS5536_USB_MSR_BASE	| (offset))
+#define IDE_MSR_REG(offset)	(CS5536_IDE_MSR_BASE	| (offset))
+#define DIVIL_MSR_REG(offset)	(CS5536_DIVIL_MSR_BASE	| (offset))
+#define ACC_MSR_REG(offset)	(CS5536_ACC_MSR_BASE	| (offset))
+#define UNUSED_MSR_REG(offset)	(CS5536_UNUSED_MSR_BASE | (offset))
+#define GLCP_MSR_REG(offset)	(CS5536_GLCP_MSR_BASE	| (offset))
 
 /*
  * BAR SPACE OF VIRTUAL PCI :
  * range for pci probe use, length is the actual size.
  */
 /* IO space for all DIVIL modules */
-#define	CS5536_IRQ_RANGE	0xffffffe0 /* USERD FOR PCI PROBE */
-#define	CS5536_IRQ_LENGTH	0x20	/* THE REGS ACTUAL LENGTH */
-#define	CS5536_SMB_RANGE	0xfffffff8
-#define	CS5536_SMB_LENGTH	0x08
-#define	CS5536_GPIO_RANGE	0xffffff00
-#define	CS5536_GPIO_LENGTH	0x100
-#define	CS5536_MFGPT_RANGE	0xffffffc0
-#define	CS5536_MFGPT_LENGTH	0x40
-#define	CS5536_ACPI_RANGE	0xffffffe0
-#define	CS5536_ACPI_LENGTH	0x20
-#define	CS5536_PMS_RANGE	0xffffff80
-#define	CS5536_PMS_LENGTH	0x80
+#define CS5536_IRQ_RANGE	0xffffffe0 /* USERD FOR PCI PROBE */
+#define CS5536_IRQ_LENGTH	0x20	/* THE REGS ACTUAL LENGTH */
+#define CS5536_SMB_RANGE	0xfffffff8
+#define CS5536_SMB_LENGTH	0x08
+#define CS5536_GPIO_RANGE	0xffffff00
+#define CS5536_GPIO_LENGTH	0x100
+#define CS5536_MFGPT_RANGE	0xffffffc0
+#define CS5536_MFGPT_LENGTH	0x40
+#define CS5536_ACPI_RANGE	0xffffffe0
+#define CS5536_ACPI_LENGTH	0x20
+#define CS5536_PMS_RANGE	0xffffff80
+#define CS5536_PMS_LENGTH	0x80
 /* IO space for IDE */
-#define	CS5536_IDE_RANGE	0xfffffff0
-#define	CS5536_IDE_LENGTH	0x10
+#define CS5536_IDE_RANGE	0xfffffff0
+#define CS5536_IDE_LENGTH	0x10
 /* IO space for ACC */
-#define	CS5536_ACC_RANGE	0xffffff80
-#define	CS5536_ACC_LENGTH	0x80
+#define CS5536_ACC_RANGE	0xffffff80
+#define CS5536_ACC_LENGTH	0x80
 /* MEM space for ALL USB modules */
-#define	CS5536_OHCI_RANGE	0xfffff000
-#define	CS5536_OHCI_LENGTH	0x1000
-#define	CS5536_EHCI_RANGE	0xfffff000
-#define	CS5536_EHCI_LENGTH	0x1000
+#define CS5536_OHCI_RANGE	0xfffff000
+#define CS5536_OHCI_LENGTH	0x1000
+#define CS5536_EHCI_RANGE	0xfffff000
+#define CS5536_EHCI_LENGTH	0x1000
 
 /*
  * PCI MSR ACCESS
  */
-#define	PCI_MSR_CTRL		0xF0
-#define	PCI_MSR_ADDR		0xF4
-#define	PCI_MSR_DATA_LO		0xF8
-#define	PCI_MSR_DATA_HI		0xFC
+#define PCI_MSR_CTRL		0xF0
+#define PCI_MSR_ADDR		0xF4
+#define PCI_MSR_DATA_LO		0xF8
+#define PCI_MSR_DATA_HI		0xFC
 
 /**************** MSR *****************************/
 
 /*
  * GLIU STANDARD MSR
  */
-#define	GLIU_CAP		0x00
-#define	GLIU_CONFIG		0x01
-#define	GLIU_SMI		0x02
-#define	GLIU_ERROR		0x03
-#define	GLIU_PM			0x04
-#define	GLIU_DIAG		0x05
+#define GLIU_CAP		0x00
+#define GLIU_CONFIG		0x01
+#define GLIU_SMI		0x02
+#define GLIU_ERROR		0x03
+#define GLIU_PM			0x04
+#define GLIU_DIAG		0x05
 
 /*
  * GLIU SPEC. MSR
  */
-#define	GLIU_P2D_BM0		0x20
-#define	GLIU_P2D_BM1		0x21
-#define	GLIU_P2D_BM2		0x22
-#define	GLIU_P2D_BMK0		0x23
-#define	GLIU_P2D_BMK1		0x24
-#define	GLIU_P2D_BM3		0x25
-#define	GLIU_P2D_BM4		0x26
-#define	GLIU_COH		0x80
-#define	GLIU_PAE		0x81
-#define	GLIU_ARB		0x82
-#define	GLIU_ASMI		0x83
-#define	GLIU_AERR		0x84
-#define	GLIU_DEBUG		0x85
-#define	GLIU_PHY_CAP		0x86
-#define	GLIU_NOUT_RESP		0x87
-#define	GLIU_NOUT_WDATA		0x88
-#define	GLIU_WHOAMI		0x8B
-#define	GLIU_SLV_DIS		0x8C
-#define	GLIU_IOD_BM0		0xE0
-#define	GLIU_IOD_BM1		0xE1
-#define	GLIU_IOD_BM2		0xE2
-#define	GLIU_IOD_BM3		0xE3
-#define	GLIU_IOD_BM4		0xE4
-#define	GLIU_IOD_BM5		0xE5
-#define	GLIU_IOD_BM6		0xE6
-#define	GLIU_IOD_BM7		0xE7
-#define	GLIU_IOD_BM8		0xE8
-#define	GLIU_IOD_BM9		0xE9
-#define	GLIU_IOD_SC0		0xEA
-#define	GLIU_IOD_SC1		0xEB
-#define	GLIU_IOD_SC2		0xEC
-#define	GLIU_IOD_SC3		0xED
-#define	GLIU_IOD_SC4		0xEE
-#define	GLIU_IOD_SC5		0xEF
-#define	GLIU_IOD_SC6		0xF0
-#define	GLIU_IOD_SC7		0xF1
+#define GLIU_P2D_BM0		0x20
+#define GLIU_P2D_BM1		0x21
+#define GLIU_P2D_BM2		0x22
+#define GLIU_P2D_BMK0		0x23
+#define GLIU_P2D_BMK1		0x24
+#define GLIU_P2D_BM3		0x25
+#define GLIU_P2D_BM4		0x26
+#define GLIU_COH		0x80
+#define GLIU_PAE		0x81
+#define GLIU_ARB		0x82
+#define GLIU_ASMI		0x83
+#define GLIU_AERR		0x84
+#define GLIU_DEBUG		0x85
+#define GLIU_PHY_CAP		0x86
+#define GLIU_NOUT_RESP		0x87
+#define GLIU_NOUT_WDATA		0x88
+#define GLIU_WHOAMI		0x8B
+#define GLIU_SLV_DIS		0x8C
+#define GLIU_IOD_BM0		0xE0
+#define GLIU_IOD_BM1		0xE1
+#define GLIU_IOD_BM2		0xE2
+#define GLIU_IOD_BM3		0xE3
+#define GLIU_IOD_BM4		0xE4
+#define GLIU_IOD_BM5		0xE5
+#define GLIU_IOD_BM6		0xE6
+#define GLIU_IOD_BM7		0xE7
+#define GLIU_IOD_BM8		0xE8
+#define GLIU_IOD_BM9		0xE9
+#define GLIU_IOD_SC0		0xEA
+#define GLIU_IOD_SC1		0xEB
+#define GLIU_IOD_SC2		0xEC
+#define GLIU_IOD_SC3		0xED
+#define GLIU_IOD_SC4		0xEE
+#define GLIU_IOD_SC5		0xEF
+#define GLIU_IOD_SC6		0xF0
+#define GLIU_IOD_SC7		0xF1
 
 /*
  * SB STANDARD
  */
-#define	SB_CAP		0x00
-#define	SB_CONFIG	0x01
-#define	SB_SMI		0x02
-#define	SB_ERROR	0x03
-#define	SB_MAR_ERR_EN		0x00000001
-#define	SB_TAR_ERR_EN		0x00000002
-#define	SB_RSVD_BIT1		0x00000004
-#define	SB_EXCEP_ERR_EN		0x00000008
-#define	SB_SYSE_ERR_EN		0x00000010
-#define	SB_PARE_ERR_EN		0x00000020
-#define	SB_TAS_ERR_EN		0x00000040
-#define	SB_MAR_ERR_FLAG		0x00010000
-#define	SB_TAR_ERR_FLAG		0x00020000
-#define	SB_RSVD_BIT2		0x00040000
-#define	SB_EXCEP_ERR_FLAG	0x00080000
-#define	SB_SYSE_ERR_FLAG	0x00100000
-#define	SB_PARE_ERR_FLAG	0x00200000
-#define	SB_TAS_ERR_FLAG		0x00400000
-#define	SB_PM		0x04
-#define	SB_DIAG		0x05
+#define SB_CAP		0x00
+#define SB_CONFIG	0x01
+#define SB_SMI		0x02
+#define SB_ERROR	0x03
+#define SB_MAR_ERR_EN		0x00000001
+#define SB_TAR_ERR_EN		0x00000002
+#define SB_RSVD_BIT1		0x00000004
+#define SB_EXCEP_ERR_EN		0x00000008
+#define SB_SYSE_ERR_EN		0x00000010
+#define SB_PARE_ERR_EN		0x00000020
+#define SB_TAS_ERR_EN		0x00000040
+#define SB_MAR_ERR_FLAG		0x00010000
+#define SB_TAR_ERR_FLAG		0x00020000
+#define SB_RSVD_BIT2		0x00040000
+#define SB_EXCEP_ERR_FLAG	0x00080000
+#define SB_SYSE_ERR_FLAG	0x00100000
+#define SB_PARE_ERR_FLAG	0x00200000
+#define SB_TAS_ERR_FLAG		0x00400000
+#define SB_PM		0x04
+#define SB_DIAG		0x05
 
 /*
  * SB SPEC.
  */
-#define	SB_CTRL		0x10
-#define	SB_R0		0x20
-#define	SB_R1		0x21
-#define	SB_R2		0x22
-#define	SB_R3		0x23
-#define	SB_R4		0x24
-#define	SB_R5		0x25
-#define	SB_R6		0x26
-#define	SB_R7		0x27
-#define	SB_R8		0x28
-#define	SB_R9		0x29
-#define	SB_R10		0x2A
-#define	SB_R11		0x2B
-#define	SB_R12		0x2C
-#define	SB_R13		0x2D
-#define	SB_R14		0x2E
-#define	SB_R15		0x2F
+#define SB_CTRL		0x10
+#define SB_R0		0x20
+#define SB_R1		0x21
+#define SB_R2		0x22
+#define SB_R3		0x23
+#define SB_R4		0x24
+#define SB_R5		0x25
+#define SB_R6		0x26
+#define SB_R7		0x27
+#define SB_R8		0x28
+#define SB_R9		0x29
+#define SB_R10		0x2A
+#define SB_R11		0x2B
+#define SB_R12		0x2C
+#define SB_R13		0x2D
+#define SB_R14		0x2E
+#define SB_R15		0x2F
 
 /*
  * GLCP STANDARD
  */
-#define	GLCP_CAP		0x00
-#define	GLCP_CONFIG		0x01
-#define	GLCP_SMI		0x02
-#define	GLCP_ERROR		0x03
-#define	GLCP_PM			0x04
-#define	GLCP_DIAG		0x05
+#define GLCP_CAP		0x00
+#define GLCP_CONFIG		0x01
+#define GLCP_SMI		0x02
+#define GLCP_ERROR		0x03
+#define GLCP_PM			0x04
+#define GLCP_DIAG		0x05
 
 /*
  * GLCP SPEC.
  */
-#define	GLCP_CLK_DIS_DELAY	0x08
-#define	GLCP_PM_CLK_DISABLE	0x09
-#define	GLCP_GLB_PM		0x0B
-#define	GLCP_DBG_OUT		0x0C
-#define	GLCP_RSVD1		0x0D
-#define	GLCP_SOFT_COM		0x0E
-#define	SOFT_BAR_SMB_FLAG	0x00000001
-#define	SOFT_BAR_GPIO_FLAG	0x00000002
-#define	SOFT_BAR_MFGPT_FLAG	0x00000004
-#define	SOFT_BAR_IRQ_FLAG	0x00000008
-#define	SOFT_BAR_PMS_FLAG	0x00000010
-#define	SOFT_BAR_ACPI_FLAG	0x00000020
-#define	SOFT_BAR_IDE_FLAG	0x00000400
-#define	SOFT_BAR_ACC_FLAG	0x00000800
-#define	SOFT_BAR_OHCI_FLAG	0x00001000
-#define	SOFT_BAR_EHCI_FLAG	0x00002000
-#define	GLCP_RSVD2		0x0F
-#define	GLCP_CLK_OFF		0x10
-#define	GLCP_CLK_ACTIVE		0x11
-#define	GLCP_CLK_DISABLE	0x12
-#define	GLCP_CLK4ACK		0x13
-#define	GLCP_SYS_RST		0x14
-#define	GLCP_RSVD3		0x15
-#define	GLCP_DBG_CLK_CTRL	0x16
-#define	GLCP_CHIP_REV_ID	0x17
+#define GLCP_CLK_DIS_DELAY	0x08
+#define GLCP_PM_CLK_DISABLE	0x09
+#define GLCP_GLB_PM		0x0B
+#define GLCP_DBG_OUT		0x0C
+#define GLCP_RSVD1		0x0D
+#define GLCP_SOFT_COM		0x0E
+#define SOFT_BAR_SMB_FLAG	0x00000001
+#define SOFT_BAR_GPIO_FLAG	0x00000002
+#define SOFT_BAR_MFGPT_FLAG	0x00000004
+#define SOFT_BAR_IRQ_FLAG	0x00000008
+#define SOFT_BAR_PMS_FLAG	0x00000010
+#define SOFT_BAR_ACPI_FLAG	0x00000020
+#define SOFT_BAR_IDE_FLAG	0x00000400
+#define SOFT_BAR_ACC_FLAG	0x00000800
+#define SOFT_BAR_OHCI_FLAG	0x00001000
+#define SOFT_BAR_EHCI_FLAG	0x00002000
+#define GLCP_RSVD2		0x0F
+#define GLCP_CLK_OFF		0x10
+#define GLCP_CLK_ACTIVE		0x11
+#define GLCP_CLK_DISABLE	0x12
+#define GLCP_CLK4ACK		0x13
+#define GLCP_SYS_RST		0x14
+#define GLCP_RSVD3		0x15
+#define GLCP_DBG_CLK_CTRL	0x16
+#define GLCP_CHIP_REV_ID	0x17
 
 /* PIC */
-#define	PIC_YSEL_LOW		0x20
-#define	PIC_YSEL_LOW_USB_SHIFT		8
-#define	PIC_YSEL_LOW_ACC_SHIFT		16
-#define	PIC_YSEL_LOW_FLASH_SHIFT	24
-#define	PIC_YSEL_HIGH		0x21
-#define	PIC_ZSEL_LOW		0x22
-#define	PIC_ZSEL_HIGH		0x23
-#define	PIC_IRQM_PRIM		0x24
-#define	PIC_IRQM_LPC		0x25
-#define	PIC_XIRR_STS_LOW	0x26
-#define	PIC_XIRR_STS_HIGH	0x27
-#define	PCI_SHDW		0x34
+#define PIC_YSEL_LOW		0x20
+#define PIC_YSEL_LOW_USB_SHIFT		8
+#define PIC_YSEL_LOW_ACC_SHIFT		16
+#define PIC_YSEL_LOW_FLASH_SHIFT	24
+#define PIC_YSEL_HIGH		0x21
+#define PIC_ZSEL_LOW		0x22
+#define PIC_ZSEL_HIGH		0x23
+#define PIC_IRQM_PRIM		0x24
+#define PIC_IRQM_LPC		0x25
+#define PIC_XIRR_STS_LOW	0x26
+#define PIC_XIRR_STS_HIGH	0x27
+#define PCI_SHDW		0x34
 
 /*
  * DIVIL STANDARD
  */
-#define	DIVIL_CAP		0x00
-#define	DIVIL_CONFIG		0x01
-#define	DIVIL_SMI		0x02
-#define	DIVIL_ERROR		0x03
-#define	DIVIL_PM		0x04
-#define	DIVIL_DIAG		0x05
+#define DIVIL_CAP		0x00
+#define DIVIL_CONFIG		0x01
+#define DIVIL_SMI		0x02
+#define DIVIL_ERROR		0x03
+#define DIVIL_PM		0x04
+#define DIVIL_DIAG		0x05
 
 /*
  * DIVIL SPEC.
  */
-#define	DIVIL_LBAR_IRQ		0x08
-#define	DIVIL_LBAR_KEL		0x09
-#define	DIVIL_LBAR_SMB		0x0B
-#define	DIVIL_LBAR_GPIO		0x0C
-#define	DIVIL_LBAR_MFGPT	0x0D
-#define	DIVIL_LBAR_ACPI		0x0E
-#define	DIVIL_LBAR_PMS		0x0F
-#define	DIVIL_LEG_IO		0x14
-#define	DIVIL_BALL_OPTS		0x15
-#define	DIVIL_SOFT_IRQ		0x16
-#define	DIVIL_SOFT_RESET	0x17
+#define DIVIL_LBAR_IRQ		0x08
+#define DIVIL_LBAR_KEL		0x09
+#define DIVIL_LBAR_SMB		0x0B
+#define DIVIL_LBAR_GPIO		0x0C
+#define DIVIL_LBAR_MFGPT	0x0D
+#define DIVIL_LBAR_ACPI		0x0E
+#define DIVIL_LBAR_PMS		0x0F
+#define DIVIL_LEG_IO		0x14
+#define DIVIL_BALL_OPTS		0x15
+#define DIVIL_SOFT_IRQ		0x16
+#define DIVIL_SOFT_RESET	0x17
 
 /* MFGPT */
 #define MFGPT_IRQ	0x28
@@ -254,52 +254,52 @@
 /*
  * IDE STANDARD
  */
-#define	IDE_CAP		0x00
-#define	IDE_CONFIG	0x01
-#define	IDE_SMI		0x02
-#define	IDE_ERROR	0x03
-#define	IDE_PM		0x04
-#define	IDE_DIAG	0x05
+#define IDE_CAP		0x00
+#define IDE_CONFIG	0x01
+#define IDE_SMI		0x02
+#define IDE_ERROR	0x03
+#define IDE_PM		0x04
+#define IDE_DIAG	0x05
 
 /*
  * IDE SPEC.
  */
-#define	IDE_IO_BAR	0x08
-#define	IDE_CFG		0x10
-#define	IDE_DTC		0x12
-#define	IDE_CAST	0x13
-#define	IDE_ETC		0x14
-#define	IDE_INTERNAL_PM	0x15
+#define IDE_IO_BAR	0x08
+#define IDE_CFG		0x10
+#define IDE_DTC		0x12
+#define IDE_CAST	0x13
+#define IDE_ETC		0x14
+#define IDE_INTERNAL_PM 0x15
 
 /*
  * ACC STANDARD
  */
-#define	ACC_CAP		0x00
-#define	ACC_CONFIG	0x01
-#define	ACC_SMI		0x02
-#define	ACC_ERROR	0x03
-#define	ACC_PM		0x04
-#define	ACC_DIAG	0x05
+#define ACC_CAP		0x00
+#define ACC_CONFIG	0x01
+#define ACC_SMI		0x02
+#define ACC_ERROR	0x03
+#define ACC_PM		0x04
+#define ACC_DIAG	0x05
 
 /*
  * USB STANDARD
  */
-#define	USB_CAP		0x00
-#define	USB_CONFIG	0x01
-#define	USB_SMI		0x02
-#define	USB_ERROR	0x03
-#define	USB_PM		0x04
-#define	USB_DIAG	0x05
+#define USB_CAP		0x00
+#define USB_CONFIG	0x01
+#define USB_SMI		0x02
+#define USB_ERROR	0x03
+#define USB_PM		0x04
+#define USB_DIAG	0x05
 
 /*
  * USB SPEC.
  */
-#define	USB_OHCI	0x08
-#define	USB_EHCI	0x09
+#define USB_OHCI	0x08
+#define USB_EHCI	0x09
 
 /****************** NATIVE ***************************/
 /* GPIO : I/O SPACE; REG : 32BITS */
-#define	GPIOL_OUT_VAL		0x00
-#define	GPIOL_OUT_EN		0x04
+#define GPIOL_OUT_VAL		0x00
+#define GPIOL_OUT_EN		0x04
 
 #endif				/* _CS5536_H */
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h
index 4b493d6..021d017 100644
--- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h
+++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h
@@ -25,7 +25,7 @@
 #endif
 
 #define MFGPT_TICK_RATE 14318000
-#define COMPARE  ((MFGPT_TICK_RATE + HZ/2) / HZ)
+#define COMPARE	 ((MFGPT_TICK_RATE + HZ/2) / HZ)
 
 #define MFGPT_BASE	mfgpt_base
 #define MFGPT0_CMP2	(MFGPT_BASE + 2)
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h
index 0dca9c8..8a7ecb4 100644
--- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h
+++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h
@@ -8,8 +8,8 @@
  * Author : jlliu, liujl@lemote.com
  */
 
-#ifndef	_CS5536_PCI_H
-#define	_CS5536_PCI_H
+#ifndef _CS5536_PCI_H
+#define _CS5536_PCI_H
 
 #include <linux/types.h>
 #include <linux/pci_regs.h>
@@ -17,20 +17,20 @@
 extern void cs5536_pci_conf_write4(int function, int reg, u32 value);
 extern u32 cs5536_pci_conf_read4(int function, int reg);
 
-#define	CS5536_ACC_INTR		9
-#define	CS5536_IDE_INTR		14
-#define	CS5536_USB_INTR		11
-#define	CS5536_MFGPT_INTR	5
-#define	CS5536_UART1_INTR	4
-#define	CS5536_UART2_INTR	3
+#define CS5536_ACC_INTR		9
+#define CS5536_IDE_INTR		14
+#define CS5536_USB_INTR		11
+#define CS5536_MFGPT_INTR	5
+#define CS5536_UART1_INTR	4
+#define CS5536_UART2_INTR	3
 
 /************** PCI BUS DEVICE FUNCTION ***************/
 
 /*
  * PCI bus device function
  */
-#define	PCI_BUS_CS5536		0
-#define	PCI_IDSEL_CS5536	14
+#define PCI_BUS_CS5536		0
+#define PCI_IDSEL_CS5536	14
 
 /********** STANDARD PCI-2.2 EXPANSION ****************/
 
@@ -45,21 +45,21 @@
 	(((mod_dev_id) << 16) | (sys_vendor_id))
 
 /* VENDOR ID */
-#define	CS5536_VENDOR_ID	0x1022
+#define CS5536_VENDOR_ID	0x1022
 
 /* DEVICE ID */
-#define	CS5536_ISA_DEVICE_ID		0x2090
-#define	CS5536_IDE_DEVICE_ID		0x209a
-#define	CS5536_ACC_DEVICE_ID		0x2093
-#define	CS5536_OHCI_DEVICE_ID		0x2094
-#define	CS5536_EHCI_DEVICE_ID		0x2095
+#define CS5536_ISA_DEVICE_ID		0x2090
+#define CS5536_IDE_DEVICE_ID		0x209a
+#define CS5536_ACC_DEVICE_ID		0x2093
+#define CS5536_OHCI_DEVICE_ID		0x2094
+#define CS5536_EHCI_DEVICE_ID		0x2095
 
 /* CLASS CODE : CLASS SUB-CLASS INTERFACE */
-#define	CS5536_ISA_CLASS_CODE		0x060100
+#define CS5536_ISA_CLASS_CODE		0x060100
 #define CS5536_IDE_CLASS_CODE		0x010180
-#define	CS5536_ACC_CLASS_CODE		0x040100
-#define	CS5536_OHCI_CLASS_CODE		0x0C0310
-#define	CS5536_EHCI_CLASS_CODE		0x0C0320
+#define CS5536_ACC_CLASS_CODE		0x040100
+#define CS5536_OHCI_CLASS_CODE		0x0C0310
+#define CS5536_EHCI_CLASS_CODE		0x0C0320
 
 /* BHLC : BIST HEADER-TYPE LATENCY-TIMER CACHE-LINE-SIZE */
 
@@ -67,40 +67,40 @@
 	((PCI_NONE_BIST << 24) | ((header_type) << 16) \
 		| ((latency_timer) << 8) | PCI_NORMAL_CACHE_LINE_SIZE);
 
-#define	PCI_NONE_BIST			0x00	/* RO not implemented yet. */
-#define	PCI_BRIDGE_HEADER_TYPE		0x80	/* RO */
-#define	PCI_NORMAL_HEADER_TYPE		0x00
-#define	PCI_NORMAL_LATENCY_TIMER	0x00
-#define	PCI_NORMAL_CACHE_LINE_SIZE	0x08	/* RW */
+#define PCI_NONE_BIST			0x00	/* RO not implemented yet. */
+#define PCI_BRIDGE_HEADER_TYPE		0x80	/* RO */
+#define PCI_NORMAL_HEADER_TYPE		0x00
+#define PCI_NORMAL_LATENCY_TIMER	0x00
+#define PCI_NORMAL_CACHE_LINE_SIZE	0x08	/* RW */
 
 /* BAR */
-#define	PCI_BAR0_REG			0x10
-#define	PCI_BAR1_REG			0x14
-#define	PCI_BAR2_REG			0x18
-#define	PCI_BAR3_REG			0x1c
-#define	PCI_BAR4_REG			0x20
-#define	PCI_BAR5_REG			0x24
-#define	PCI_BAR_COUNT			6
-#define	PCI_BAR_RANGE_MASK		0xFFFFFFFF
+#define PCI_BAR0_REG			0x10
+#define PCI_BAR1_REG			0x14
+#define PCI_BAR2_REG			0x18
+#define PCI_BAR3_REG			0x1c
+#define PCI_BAR4_REG			0x20
+#define PCI_BAR5_REG			0x24
+#define PCI_BAR_COUNT			6
+#define PCI_BAR_RANGE_MASK		0xFFFFFFFF
 
 /* CARDBUS CIS POINTER */
-#define	PCI_CARDBUS_CIS_POINTER		0x00000000
+#define PCI_CARDBUS_CIS_POINTER		0x00000000
 
-/* SUBSYSTEM VENDOR ID  */
-#define	CS5536_SUB_VENDOR_ID		CS5536_VENDOR_ID
+/* SUBSYSTEM VENDOR ID	*/
+#define CS5536_SUB_VENDOR_ID		CS5536_VENDOR_ID
 
 /* SUBSYSTEM ID */
-#define	CS5536_ISA_SUB_ID		CS5536_ISA_DEVICE_ID
-#define	CS5536_IDE_SUB_ID		CS5536_IDE_DEVICE_ID
-#define	CS5536_ACC_SUB_ID		CS5536_ACC_DEVICE_ID
-#define	CS5536_OHCI_SUB_ID		CS5536_OHCI_DEVICE_ID
-#define	CS5536_EHCI_SUB_ID		CS5536_EHCI_DEVICE_ID
+#define CS5536_ISA_SUB_ID		CS5536_ISA_DEVICE_ID
+#define CS5536_IDE_SUB_ID		CS5536_IDE_DEVICE_ID
+#define CS5536_ACC_SUB_ID		CS5536_ACC_DEVICE_ID
+#define CS5536_OHCI_SUB_ID		CS5536_OHCI_DEVICE_ID
+#define CS5536_EHCI_SUB_ID		CS5536_EHCI_DEVICE_ID
 
 /* EXPANSION ROM BAR */
-#define	PCI_EXPANSION_ROM_BAR		0x00000000
+#define PCI_EXPANSION_ROM_BAR		0x00000000
 
 /* CAPABILITIES POINTER */
-#define	PCI_CAPLIST_POINTER		0x00000000
+#define PCI_CAPLIST_POINTER		0x00000000
 #define PCI_CAPLIST_USB_POINTER		0x40
 /* INTERRUPT */
 
@@ -108,46 +108,46 @@
 	((PCI_MAX_LATENCY << 24) | (PCI_MIN_GRANT << 16) | \
 		((pin) << 8) | (mod_intr))
 
-#define	PCI_MAX_LATENCY			0x40
-#define	PCI_MIN_GRANT			0x00
-#define	PCI_DEFAULT_PIN			0x01
+#define PCI_MAX_LATENCY			0x40
+#define PCI_MIN_GRANT			0x00
+#define PCI_DEFAULT_PIN			0x01
 
 /*********** EXPANSION PCI REG ************************/
 
 /*
  * ISA EXPANSION
  */
-#define	PCI_UART1_INT_REG 	0x50
+#define PCI_UART1_INT_REG	0x50
 #define PCI_UART2_INT_REG	0x54
-#define	PCI_ISA_FIXUP_REG	0x58
+#define PCI_ISA_FIXUP_REG	0x58
 
 /*
  * IDE EXPANSION
  */
-#define	PCI_IDE_CFG_REG		0x40
-#define	CS5536_IDE_FLASH_SIGNATURE	0xDEADBEEF
-#define	PCI_IDE_DTC_REG		0x48
-#define	PCI_IDE_CAST_REG	0x4C
-#define	PCI_IDE_ETC_REG		0x50
-#define	PCI_IDE_PM_REG		0x54
-#define	PCI_IDE_INT_REG		0x60
+#define PCI_IDE_CFG_REG		0x40
+#define CS5536_IDE_FLASH_SIGNATURE	0xDEADBEEF
+#define PCI_IDE_DTC_REG		0x48
+#define PCI_IDE_CAST_REG	0x4C
+#define PCI_IDE_ETC_REG		0x50
+#define PCI_IDE_PM_REG		0x54
+#define PCI_IDE_INT_REG		0x60
 
 /*
  * ACC EXPANSION
  */
-#define	PCI_ACC_INT_REG		0x50
+#define PCI_ACC_INT_REG		0x50
 
 /*
  * OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI
  */
-#define	PCI_OHCI_PM_REG		0x40
-#define	PCI_OHCI_INT_REG	0x50
+#define PCI_OHCI_PM_REG		0x40
+#define PCI_OHCI_INT_REG	0x50
 
 /*
  * EHCI EXPANSION
  */
-#define	PCI_EHCI_LEGSMIEN_REG	0x50
-#define	PCI_EHCI_LEGSMISTS_REG	0x54
-#define	PCI_EHCI_FLADJ_REG	0x60
+#define PCI_EHCI_LEGSMIEN_REG	0x50
+#define PCI_EHCI_LEGSMISTS_REG	0x54
+#define PCI_EHCI_FLADJ_REG	0x60
 
 #endif				/* _CS5536_PCI_H_ */
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h
index 21c4ece..1f17c18 100644
--- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h
+++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h
@@ -5,8 +5,8 @@
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  */
 
-#ifndef	_CS5536_VSM_H
-#define	_CS5536_VSM_H
+#ifndef _CS5536_VSM_H
+#define _CS5536_VSM_H
 
 #include <linux/types.h>
 
diff --git a/arch/mips/include/asm/mach-loongson/gpio.h b/arch/mips/include/asm/mach-loongson/gpio.h
index e30e73d..211a7b7 100644
--- a/arch/mips/include/asm/mach-loongson/gpio.h
+++ b/arch/mips/include/asm/mach-loongson/gpio.h
@@ -10,8 +10,8 @@
  * (at your option) any later version.
  */
 
-#ifndef	__STLS2F_GPIO_H
-#define	__STLS2F_GPIO_H
+#ifndef __STLS2F_GPIO_H
+#define __STLS2F_GPIO_H
 
 #include <asm-generic/gpio.h>
 
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index 5222a00..b286534 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -2,8 +2,8 @@
  * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -52,7 +52,7 @@
 extern int mach_i8259_irq(void);
 
 /* We need this in some places... */
-#define delay()	({		\
+#define delay() ({		\
 	int x;				\
 	for (x = 0; x < 100000; x++)	\
 		__asm__ __volatile__(""); \
@@ -82,13 +82,13 @@
 
 #define LOONGSON_BOOT_BASE	0x1fc00000
 #define LOONGSON_BOOT_SIZE	0x00100000	/* 1M */
-#define LOONGSON_BOOT_TOP 	(LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1)
-#define LOONGSON_REG_BASE 	0x1fe00000
-#define LOONGSON_REG_SIZE 	0x00100000	/* 256Bytes + 256Bytes + ??? */
+#define LOONGSON_BOOT_TOP	(LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1)
+#define LOONGSON_REG_BASE	0x1fe00000
+#define LOONGSON_REG_SIZE	0x00100000	/* 256Bytes + 256Bytes + ??? */
 #define LOONGSON_REG_TOP	(LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1)
 
-#define LOONGSON_LIO1_BASE 	0x1ff00000
-#define LOONGSON_LIO1_SIZE 	0x00100000	/* 1M */
+#define LOONGSON_LIO1_BASE	0x1ff00000
+#define LOONGSON_LIO1_SIZE	0x00100000	/* 1M */
 #define LOONGSON_LIO1_TOP	(LOONGSON_LIO1_BASE+LOONGSON_LIO1_SIZE-1)
 
 #define LOONGSON_PCILO0_BASE	0x10000000
@@ -115,13 +115,13 @@
 #define LOONGSON_PCI_REG(x)	LOONGSON_REG(LOONGSON_PCICONFIGBASE + (x))
 #define LOONGSON_PCIDID		LOONGSON_PCI_REG(0x00)
 #define LOONGSON_PCICMD		LOONGSON_PCI_REG(0x04)
-#define LOONGSON_PCICLASS 	LOONGSON_PCI_REG(0x08)
+#define LOONGSON_PCICLASS	LOONGSON_PCI_REG(0x08)
 #define LOONGSON_PCILTIMER	LOONGSON_PCI_REG(0x0c)
-#define LOONGSON_PCIBASE0 	LOONGSON_PCI_REG(0x10)
-#define LOONGSON_PCIBASE1 	LOONGSON_PCI_REG(0x14)
-#define LOONGSON_PCIBASE2 	LOONGSON_PCI_REG(0x18)
-#define LOONGSON_PCIBASE3 	LOONGSON_PCI_REG(0x1c)
-#define LOONGSON_PCIBASE4 	LOONGSON_PCI_REG(0x20)
+#define LOONGSON_PCIBASE0	LOONGSON_PCI_REG(0x10)
+#define LOONGSON_PCIBASE1	LOONGSON_PCI_REG(0x14)
+#define LOONGSON_PCIBASE2	LOONGSON_PCI_REG(0x18)
+#define LOONGSON_PCIBASE3	LOONGSON_PCI_REG(0x1c)
+#define LOONGSON_PCIBASE4	LOONGSON_PCI_REG(0x20)
 #define LOONGSON_PCIEXPRBASE	LOONGSON_PCI_REG(0x30)
 #define LOONGSON_PCIINT		LOONGSON_PCI_REG(0x3c)
 
@@ -132,7 +132,7 @@
 #define LOONGSON_PCICMD_MABORT_CLR	0x20000000
 #define LOONGSON_PCICMD_MTABORT_CLR	0x10000000
 #define LOONGSON_PCICMD_TABORT_CLR	0x08000000
-#define LOONGSON_PCICMD_MPERR_CLR 	0x01000000
+#define LOONGSON_PCICMD_MPERR_CLR	0x01000000
 #define LOONGSON_PCICMD_PERRRESPEN	0x00000040
 #define LOONGSON_PCICMD_ASTEPEN		0x00000080
 #define LOONGSON_PCICMD_SERREN		0x00000100
@@ -142,7 +142,7 @@
 /* Loongson h/w Configuration */
 
 #define LOONGSON_GENCFG_OFFSET		0x4
-#define LOONGSON_GENCFG	LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET)
+#define LOONGSON_GENCFG LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET)
 
 #define LOONGSON_GENCFG_DEBUGMODE	0x00000001
 #define LOONGSON_GENCFG_SNOOPEN		0x00000002
@@ -173,25 +173,25 @@
 
 /* GPIO Regs - r/w */
 
-#define LOONGSON_GPIODATA 		LOONGSON_REG(LOONGSON_REGBASE + 0x1c)
+#define LOONGSON_GPIODATA		LOONGSON_REG(LOONGSON_REGBASE + 0x1c)
 #define LOONGSON_GPIOIE			LOONGSON_REG(LOONGSON_REGBASE + 0x20)
 
 /* ICU Configuration Regs - r/w */
 
 #define LOONGSON_INTEDGE		LOONGSON_REG(LOONGSON_REGBASE + 0x24)
-#define LOONGSON_INTSTEER 		LOONGSON_REG(LOONGSON_REGBASE + 0x28)
+#define LOONGSON_INTSTEER		LOONGSON_REG(LOONGSON_REGBASE + 0x28)
 #define LOONGSON_INTPOL			LOONGSON_REG(LOONGSON_REGBASE + 0x2c)
 
 /* ICU Enable Regs - IntEn & IntISR are r/o. */
 
-#define LOONGSON_INTENSET 		LOONGSON_REG(LOONGSON_REGBASE + 0x30)
-#define LOONGSON_INTENCLR 		LOONGSON_REG(LOONGSON_REGBASE + 0x34)
+#define LOONGSON_INTENSET		LOONGSON_REG(LOONGSON_REGBASE + 0x30)
+#define LOONGSON_INTENCLR		LOONGSON_REG(LOONGSON_REGBASE + 0x34)
 #define LOONGSON_INTEN			LOONGSON_REG(LOONGSON_REGBASE + 0x38)
 #define LOONGSON_INTISR			LOONGSON_REG(LOONGSON_REGBASE + 0x3c)
 
 /* ICU */
 #define LOONGSON_ICU_MBOXES		0x0000000f
-#define LOONGSON_ICU_MBOXES_SHIFT 	0
+#define LOONGSON_ICU_MBOXES_SHIFT	0
 #define LOONGSON_ICU_DMARDY		0x00000010
 #define LOONGSON_ICU_DMAEMPTY		0x00000020
 #define LOONGSON_ICU_COPYRDY		0x00000040
@@ -212,10 +212,10 @@
 
 /* PCI prefetch window base & mask */
 
-#define LOONGSON_MEM_WIN_BASE_L 	LOONGSON_REG(LOONGSON_REGBASE + 0x40)
-#define LOONGSON_MEM_WIN_BASE_H 	LOONGSON_REG(LOONGSON_REGBASE + 0x44)
-#define LOONGSON_MEM_WIN_MASK_L 	LOONGSON_REG(LOONGSON_REGBASE + 0x48)
-#define LOONGSON_MEM_WIN_MASK_H 	LOONGSON_REG(LOONGSON_REGBASE + 0x4c)
+#define LOONGSON_MEM_WIN_BASE_L		LOONGSON_REG(LOONGSON_REGBASE + 0x40)
+#define LOONGSON_MEM_WIN_BASE_H		LOONGSON_REG(LOONGSON_REGBASE + 0x44)
+#define LOONGSON_MEM_WIN_MASK_L		LOONGSON_REG(LOONGSON_REGBASE + 0x48)
+#define LOONGSON_MEM_WIN_MASK_H		LOONGSON_REG(LOONGSON_REGBASE + 0x4c)
 
 /* PCI_Hit*_Sel_* */
 
diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h
index 4321338..3810d5c 100644
--- a/arch/mips/include/asm/mach-loongson/machine.h
+++ b/arch/mips/include/asm/mach-loongson/machine.h
@@ -2,8 +2,8 @@
  * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/include/asm/mach-loongson/mem.h b/arch/mips/include/asm/mach-loongson/mem.h
index 3b23ee8..f4a36d7 100644
--- a/arch/mips/include/asm/mach-loongson/mem.h
+++ b/arch/mips/include/asm/mach-loongson/mem.h
@@ -2,8 +2,8 @@
  * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/include/asm/mach-loongson1/irq.h b/arch/mips/include/asm/mach-loongson1/irq.h
index da96ed4..96bfb1c 100644
--- a/arch/mips/include/asm/mach-loongson1/irq.h
+++ b/arch/mips/include/asm/mach-loongson1/irq.h
@@ -3,8 +3,8 @@
  *
  * IRQ mappings for Loongson 1
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/include/asm/mach-loongson1/loongson1.h b/arch/mips/include/asm/mach-loongson1/loongson1.h
index 4e18e88..5c437c2 100644
--- a/arch/mips/include/asm/mach-loongson1/loongson1.h
+++ b/arch/mips/include/asm/mach-loongson1/loongson1.h
@@ -3,8 +3,8 @@
  *
  * Register mappings for Loongson 1
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/include/asm/mach-loongson1/platform.h b/arch/mips/include/asm/mach-loongson1/platform.h
index 718a122..30c13e5 100644
--- a/arch/mips/include/asm/mach-loongson1/platform.h
+++ b/arch/mips/include/asm/mach-loongson1/platform.h
@@ -1,8 +1,8 @@
 /*
  * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/include/asm/mach-loongson1/prom.h b/arch/mips/include/asm/mach-loongson1/prom.h
index b871dc4..34859a4 100644
--- a/arch/mips/include/asm/mach-loongson1/prom.h
+++ b/arch/mips/include/asm/mach-loongson1/prom.h
@@ -1,8 +1,8 @@
 /*
  * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-clk.h b/arch/mips/include/asm/mach-loongson1/regs-clk.h
index a81fa3d..fb6a3ff 100644
--- a/arch/mips/include/asm/mach-loongson1/regs-clk.h
+++ b/arch/mips/include/asm/mach-loongson1/regs-clk.h
@@ -3,8 +3,8 @@
  *
  * Loongson 1 Clock Register Definitions.
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-wdt.h b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
index f897de6..6574568 100644
--- a/arch/mips/include/asm/mach-loongson1/regs-wdt.h
+++ b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
@@ -3,8 +3,8 @@
  *
  * Loongson 1 watchdog register definitions.
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
index 37e3583..de3b66a 100644
--- a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
@@ -23,8 +23,8 @@
 /* #define cpu_has_watch	? */
 #define cpu_has_divec		1
 #define cpu_has_vce		0
-/* #define cpu_has_cache_cdex_p	? */
-/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
 /* #define cpu_has_prefetch	? */
 #define cpu_has_mcheck		1
 /* #define cpu_has_ejtag	? */
@@ -50,8 +50,8 @@
 /* #define cpu_has_watch	? */
 #define cpu_has_divec		1
 #define cpu_has_vce		0
-/* #define cpu_has_cache_cdex_p	? */
-/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
 /* #define cpu_has_prefetch	? */
 #define cpu_has_mcheck		1
 /* #define cpu_has_ejtag	? */
diff --git a/arch/mips/include/asm/mach-malta/irq.h b/arch/mips/include/asm/mach-malta/irq.h
index 9b9da26..47cfe64 100644
--- a/arch/mips/include/asm/mach-malta/irq.h
+++ b/arch/mips/include/asm/mach-malta/irq.h
@@ -2,7 +2,7 @@
 #define __ASM_MACH_MIPS_IRQ_H
 
 
-#define NR_IRQS	256
+#define NR_IRQS 256
 
 #include_next <irq.h>
 
diff --git a/arch/mips/include/asm/mach-malta/mach-gt64120.h b/arch/mips/include/asm/mach-malta/mach-gt64120.h
index 0f86314..62a4b288 100644
--- a/arch/mips/include/asm/mach-malta/mach-gt64120.h
+++ b/arch/mips/include/asm/mach-malta/mach-gt64120.h
@@ -1,6 +1,6 @@
 /*
  *  This is a direct copy of the ev96100.h file, with a global
- * search and replace.  The numbers are the same.
+ * search and replace.	The numbers are the same.
  *
  *  The reason I'm duplicating this is so that the 64120/96100
  * defines won't be confusing in the source code.
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h
similarity index 100%
rename from arch/mips/include/asm/pmc-sierra/msp71xx/cpu-feature-overrides.h
rename to arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h b/arch/mips/include/asm/mach-pmcs-msp71xx/gpio.h
similarity index 100%
rename from arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h
rename to arch/mips/include/asm/mach-pmcs-msp71xx/gpio.h
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h
similarity index 61%
rename from arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h
rename to arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h
index c84bcf9..ac863e2 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h
+++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h
@@ -43,14 +43,14 @@
  * IRQs directly forwarded to the CPU
  */
 #define MSP_MIPS_INTBASE	0
-#define MSP_INT_SW0		0	/* IRQ for swint0,       C_SW0  */
-#define MSP_INT_SW1		1	/* IRQ for swint1,       C_SW1  */
-#define MSP_INT_MAC0		2	/* IRQ for MAC 0,        C_IRQ0 */
-#define MSP_INT_MAC1		3	/* IRQ for MAC 1,        C_IRQ1 */
-#define MSP_INT_USB		4	/* IRQ for USB,          C_IRQ2 */
-#define MSP_INT_SAR		5	/* IRQ for ADSL2+ SAR,   C_IRQ3 */
-#define MSP_INT_CIC		6	/* IRQ for CIC block,    C_IRQ4 */
-#define MSP_INT_SEC		7	/* IRQ for Sec engine,   C_IRQ5 */
+#define MSP_INT_SW0		0	/* IRQ for swint0,	 C_SW0	*/
+#define MSP_INT_SW1		1	/* IRQ for swint1,	 C_SW1	*/
+#define MSP_INT_MAC0		2	/* IRQ for MAC 0,	 C_IRQ0 */
+#define MSP_INT_MAC1		3	/* IRQ for MAC 1,	 C_IRQ1 */
+#define MSP_INT_USB		4	/* IRQ for USB,		 C_IRQ2 */
+#define MSP_INT_SAR		5	/* IRQ for ADSL2+ SAR,	 C_IRQ3 */
+#define MSP_INT_CIC		6	/* IRQ for CIC block,	 C_IRQ4 */
+#define MSP_INT_SEC		7	/* IRQ for Sec engine,	 C_IRQ5 */
 
 /*
  * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
@@ -59,93 +59,93 @@
  */
 #define MSP_CIC_INTBASE		(MSP_MIPS_INTBASE + 8)
 #define MSP_INT_EXT0		(MSP_CIC_INTBASE + 0)
-					/* External interrupt 0         */
+					/* External interrupt 0		*/
 #define MSP_INT_EXT1		(MSP_CIC_INTBASE + 1)
-					/* External interrupt 1         */
+					/* External interrupt 1		*/
 #define MSP_INT_EXT2		(MSP_CIC_INTBASE + 2)
-					/* External interrupt 2         */
+					/* External interrupt 2		*/
 #define MSP_INT_EXT3		(MSP_CIC_INTBASE + 3)
-					/* External interrupt 3         */
+					/* External interrupt 3		*/
 #define MSP_INT_CPUIF		(MSP_CIC_INTBASE + 4)
-					/* CPU interface interrupt      */
+					/* CPU interface interrupt	*/
 #define MSP_INT_EXT4		(MSP_CIC_INTBASE + 5)
-					/* External interrupt 4         */
+					/* External interrupt 4		*/
 #define MSP_INT_CIC_USB		(MSP_CIC_INTBASE + 6)
-					/* Cascaded IRQ for USB         */
+					/* Cascaded IRQ for USB		*/
 #define MSP_INT_MBOX		(MSP_CIC_INTBASE + 7)
-					/* Sec engine mailbox IRQ       */
+					/* Sec engine mailbox IRQ	*/
 #define MSP_INT_EXT5		(MSP_CIC_INTBASE + 8)
-					/* External interrupt 5         */
+					/* External interrupt 5		*/
 #define MSP_INT_TDM		(MSP_CIC_INTBASE + 9)
-					/* TDM interrupt                */
+					/* TDM interrupt		*/
 #define MSP_INT_CIC_MAC0	(MSP_CIC_INTBASE + 10)
-					/* Cascaded IRQ for MAC 0       */
+					/* Cascaded IRQ for MAC 0	*/
 #define MSP_INT_CIC_MAC1	(MSP_CIC_INTBASE + 11)
-					/* Cascaded IRQ for MAC 1       */
+					/* Cascaded IRQ for MAC 1	*/
 #define MSP_INT_CIC_SEC		(MSP_CIC_INTBASE + 12)
-					/* Cascaded IRQ for sec engine  */
-#define	MSP_INT_PER		(MSP_CIC_INTBASE + 13)
-					/* Peripheral interrupt         */
-#define	MSP_INT_TIMER0		(MSP_CIC_INTBASE + 14)
-					/* SLP timer 0                  */
-#define	MSP_INT_TIMER1		(MSP_CIC_INTBASE + 15)
-					/* SLP timer 1                  */
-#define	MSP_INT_TIMER2		(MSP_CIC_INTBASE + 16)
-					/* SLP timer 2                  */
-#define	MSP_INT_VPE0_TIMER	(MSP_CIC_INTBASE + 17)
-					/* VPE0 MIPS timer              */
+					/* Cascaded IRQ for sec engine	*/
+#define MSP_INT_PER		(MSP_CIC_INTBASE + 13)
+					/* Peripheral interrupt		*/
+#define MSP_INT_TIMER0		(MSP_CIC_INTBASE + 14)
+					/* SLP timer 0			*/
+#define MSP_INT_TIMER1		(MSP_CIC_INTBASE + 15)
+					/* SLP timer 1			*/
+#define MSP_INT_TIMER2		(MSP_CIC_INTBASE + 16)
+					/* SLP timer 2			*/
+#define MSP_INT_VPE0_TIMER	(MSP_CIC_INTBASE + 17)
+					/* VPE0 MIPS timer		*/
 #define MSP_INT_BLKCP		(MSP_CIC_INTBASE + 18)
-					/* Block Copy                   */
+					/* Block Copy			*/
 #define MSP_INT_UART0		(MSP_CIC_INTBASE + 19)
-					/* UART 0                       */
+					/* UART 0			*/
 #define MSP_INT_PCI		(MSP_CIC_INTBASE + 20)
-					/* PCI subsystem                */
+					/* PCI subsystem		*/
 #define MSP_INT_EXT6		(MSP_CIC_INTBASE + 21)
-					/* External interrupt 5         */
+					/* External interrupt 5		*/
 #define MSP_INT_PCI_MSI		(MSP_CIC_INTBASE + 22)
-					/* PCI Message Signal           */
+					/* PCI Message Signal		*/
 #define MSP_INT_CIC_SAR		(MSP_CIC_INTBASE + 23)
-					/* Cascaded ADSL2+ SAR IRQ      */
+					/* Cascaded ADSL2+ SAR IRQ	*/
 #define MSP_INT_DSL		(MSP_CIC_INTBASE + 24)
-					/* ADSL2+ IRQ                   */
+					/* ADSL2+ IRQ			*/
 #define MSP_INT_CIC_ERR		(MSP_CIC_INTBASE + 25)
-					/* SLP error condition          */
+					/* SLP error condition		*/
 #define MSP_INT_VPE1_TIMER	(MSP_CIC_INTBASE + 26)
-					/* VPE1 MIPS timer              */
+					/* VPE1 MIPS timer		*/
 #define MSP_INT_VPE0_PC		(MSP_CIC_INTBASE + 27)
-					/* VPE0 Performance counter     */
+					/* VPE0 Performance counter	*/
 #define MSP_INT_VPE1_PC		(MSP_CIC_INTBASE + 28)
-					/* VPE1 Performance counter     */
+					/* VPE1 Performance counter	*/
 #define MSP_INT_EXT7		(MSP_CIC_INTBASE + 29)
-					/* External interrupt 5         */
+					/* External interrupt 5		*/
 #define MSP_INT_VPE0_SW		(MSP_CIC_INTBASE + 30)
-					/* VPE0 Software interrupt      */
+					/* VPE0 Software interrupt	*/
 #define MSP_INT_VPE1_SW		(MSP_CIC_INTBASE + 31)
-					/* VPE0 Software interrupt      */
+					/* VPE0 Software interrupt	*/
 
 /*
  * IRQs cascaded on CIC PER interrupt (MSP_INT_PER)
  */
 #define MSP_PER_INTBASE		(MSP_CIC_INTBASE + 32)
-/* Reserved					   0-1                  */
+/* Reserved					   0-1			*/
 #define MSP_INT_UART1		(MSP_PER_INTBASE + 2)
-					/* UART 1                       */
-/* Reserved					   3-5                  */
+					/* UART 1			*/
+/* Reserved					   3-5			*/
 #define MSP_INT_2WIRE		(MSP_PER_INTBASE + 6)
-					/* 2-wire                       */
+					/* 2-wire			*/
 #define MSP_INT_TM0		(MSP_PER_INTBASE + 7)
 					/* Peripheral timer block out 0 */
 #define MSP_INT_TM1		(MSP_PER_INTBASE + 8)
 					/* Peripheral timer block out 1 */
-/* Reserved					   9                    */
+/* Reserved					   9			*/
 #define MSP_INT_SPRX		(MSP_PER_INTBASE + 10)
-					/* SPI RX complete              */
+					/* SPI RX complete		*/
 #define MSP_INT_SPTX		(MSP_PER_INTBASE + 11)
-					/* SPI TX complete              */
+					/* SPI TX complete		*/
 #define MSP_INT_GPIO		(MSP_PER_INTBASE + 12)
-					/* GPIO                         */
+					/* GPIO				*/
 #define MSP_INT_PER_ERR		(MSP_PER_INTBASE + 13)
-					/* Peripheral error             */
-/* Reserved					   14-31                */
+					/* Peripheral error		*/
+/* Reserved					   14-31		*/
 
 #endif /* !_MSP_CIC_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h
similarity index 98%
rename from arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h
rename to arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h
index 156f320..daacebb 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h
+++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h
@@ -54,7 +54,7 @@
 	MSP_GPIO_UART_OUTPUT	= 0x9,	/* Only GPIO 2 or 3 */
 	MSP_GPIO_PERIF_TIMERA	= 0x9,	/* Only GPIO 0 or 1 */
 	MSP_GPIO_PERIF_TIMERB	= 0xa,	/* Only GPIO 0 or 1 */
-	MSP_GPIO_UNKNOWN	= 0xb,  /* No such GPIO or mode */
+	MSP_GPIO_UNKNOWN	= 0xb,	/* No such GPIO or mode */
 };
 
 /* -- Static Tables -- */
@@ -148,7 +148,7 @@
 	BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio))
 #define BASIC_MODE_SHIFT(gpio)	\
 	BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio))
-#define BASIC_MODE_FROM_REG(data, gpio)	\
+#define BASIC_MODE_FROM_REG(data, gpio) \
 	BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio))
 
 /*
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h
similarity index 91%
rename from arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h
rename to arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h
index 1d9f054..29f8bf7 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h
+++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h
@@ -1,7 +1,7 @@
 /*
  * Defines for the MSP interrupt handlers.
  *
- * Copyright (C) 2005, PMC-Sierra, Inc.  All rights reserved.
+ * Copyright (C) 2005, PMC-Sierra, Inc.	 All rights reserved.
  * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
  *
  * ########################################################################
@@ -28,7 +28,7 @@
 /*
  * The PMC-Sierra MSP product line has at least two different interrupt
  * controllers, the SLP register based scheme and the CIC interrupt
- * controller block mechanism.  This file distinguishes between them
+ * controller block mechanism.	This file distinguishes between them
  * so that devices see a uniform interface.
  */
 
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h
similarity index 87%
rename from arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h
rename to arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h
index 4156069..24948cc4 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h
+++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h
@@ -26,7 +26,7 @@
 #ifndef _MSP_PCI_H_
 #define _MSP_PCI_H_
 
-#define MSP_HAS_PCI(ID)	(((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
+#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
 
 /*
  * It is convenient to program the OATRAN register so that
@@ -96,24 +96,24 @@
     config_status_command, /* 1 */
     config_class_revision, /* 2 */
     config_BIST_header_latency_cache, /* 3 */
-    config_BAR0,           /* 4 */
-    config_BAR1,           /* 5 */
-    config_BAR2,           /* 6 */
-    config_not_used7,      /* 7 */
-    config_not_used8,      /* 8 */
-    config_not_used9,      /* 9 */
-    config_CIS,            /* 10 */
-    config_subsystem,      /* 11 */
-    config_not_used12,     /* 12 */
+    config_BAR0,	   /* 4 */
+    config_BAR1,	   /* 5 */
+    config_BAR2,	   /* 6 */
+    config_not_used7,	   /* 7 */
+    config_not_used8,	   /* 8 */
+    config_not_used9,	   /* 9 */
+    config_CIS,		   /* 10 */
+    config_subsystem,	   /* 11 */
+    config_not_used12,	   /* 12 */
     config_capabilities,   /* 13 */
-    config_not_used14,     /* 14 */
+    config_not_used14,	   /* 14 */
     config_lat_grant_irq,  /* 15 */
     config_message_control,/* 16 */
     config_message_addr,   /* 17 */
     config_message_data,   /* 18 */
-    config_VPD_addr,       /* 19 */
-    config_VPD_data,       /* 20 */
-    config_maxregs         /* 21 - number of registers */
+    config_VPD_addr,	   /* 19 */
+    config_VPD_data,	   /* 20 */
+    config_maxregs	   /* 21 - number of registers */
 };
 
 struct msp_pci_regs
@@ -132,15 +132,15 @@
     pcireg hop_unused_2C; /* +0x2C */
     pcireg hop_unused_30; /* +0x30 */
     pcireg hop_unused_34; /* +0x34 */
-    pcireg if_control;    /* +0x38 */
-    pcireg oatran;        /* +0x3C */
-    pcireg reset_ctl;     /* +0x40 */
-    pcireg config_addr;   /* +0x44 */
+    pcireg if_control;	  /* +0x38 */
+    pcireg oatran;	  /* +0x3C */
+    pcireg reset_ctl;	  /* +0x40 */
+    pcireg config_addr;	  /* +0x44 */
     pcireg hop_unused_48; /* +0x48 */
     pcireg msg_signaled_int_status; /* +0x4C */
     pcireg msg_signaled_int_mask;   /* +0x50 */
-    pcireg if_status;     /* +0x54 */
-    pcireg if_mask;       /* +0x58 */
+    pcireg if_status;	  /* +0x54 */
+    pcireg if_mask;	  /* +0x58 */
     pcireg hop_unused_5C; /* +0x5C */
     pcireg hop_unused_60; /* +0x60 */
     pcireg hop_unused_64; /* +0x64 */
@@ -190,9 +190,9 @@
 #define BPCI_IFSTATUS_PEI  (1<<30) /* Parity error as initiator */
 #define BPCI_IFSTATUS_PET  (1<<31) /* Parity error as target */
 
-#define BPCI_RESETCTL_PR (1<<0)    /* True if reset asserted */
-#define BPCI_RESETCTL_RT (1<<4)    /* Release time */
-#define BPCI_RESETCTL_CT (1<<8)    /* Config time */
+#define BPCI_RESETCTL_PR (1<<0)	   /* True if reset asserted */
+#define BPCI_RESETCTL_RT (1<<4)	   /* Release time */
+#define BPCI_RESETCTL_CT (1<<8)	   /* Config time */
 #define BPCI_RESETCTL_PE (1<<12)   /* PCI enabled */
 #define BPCI_RESETCTL_HM (1<<13)   /* PCI host mode */
 #define BPCI_RESETCTL_RI (1<<14)   /* PCI reset in */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h
similarity index 96%
rename from arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
rename to arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h
index 786d82d..4d3052a 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
+++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h
@@ -40,7 +40,7 @@
 		(((revision >= 0xb0) && (revision < 0xd0)))
 #define FPGA_IS_5000(revision) \
 		((revision >= 0x80) && (revision <= 0x90))
-#define	FPGA_IS_ZEUS(revision)		((revision < 0x7f))
+#define FPGA_IS_ZEUS(revision)		((revision < 0x7f))
 #define FPGA_IS_DUET(revision) \
 		(((revision >= 0xa0) && (revision < 0xb0)))
 #define FPGA_IS_MSP4200(revision)	((revision >= 0xd0))
@@ -48,7 +48,7 @@
 
 #define MACHINE_TYPE_POLO		"POLO"
 #define MACHINE_TYPE_DUET		"DUET"
-#define	MACHINE_TYPE_ZEUS		"ZEUS"
+#define MACHINE_TYPE_ZEUS		"ZEUS"
 #define MACHINE_TYPE_MSP2000REVB	"MSP2000REVB"
 #define MACHINE_TYPE_MSP5000		"MSP5000"
 #define MACHINE_TYPE_MSP4200		"MSP4200"
@@ -58,7 +58,7 @@
 
 #define MACHINE_TYPE_POLO_FPGA		"POLO-FPGA"
 #define MACHINE_TYPE_DUET_FPGA		"DUET-FPGA"
-#define	MACHINE_TYPE_ZEUS_FPGA		"ZEUS_FPGA"
+#define MACHINE_TYPE_ZEUS_FPGA		"ZEUS_FPGA"
 #define MACHINE_TYPE_MSP2000REVB_FPGA	"MSP2000REVB-FPGA"
 #define MACHINE_TYPE_MSP5000_FPGA	"MSP5000-FPGA"
 #define MACHINE_TYPE_MSP4200_FPGA	"MSP4200-FPGA"
@@ -95,7 +95,7 @@
 #define ENET_MII		'M'
 #define ENET_RMII		'R'
 
-#define	ENETTXD_FALLING		'F'
+#define ENETTXD_FALLING		'F'
 #define ENETTXD_RISING		'R'
 
 #define PCI_HOST		'H'
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h
similarity index 99%
rename from arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h
rename to arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h
index 7d41474..2dbc7a8 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h
+++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h
@@ -233,4 +233,4 @@
 	: "=&r" (tmp), "=m" (*address)				\
 	: "0" (tmp), "m" (*address))
 
-#endif  /* __ASM_REGOPS_H__ */
+#endif	/* __ASM_REGOPS_H__ */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h
similarity index 65%
rename from arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h
rename to arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h
index 692c1b6..da3a8de 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h
+++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h
@@ -37,13 +37,13 @@
 
 /*
  ########################################################################
- #  Address space and device base definitions                           #
+ #  Address space and device base definitions				#
  ########################################################################
  */
 
 /*
  ***************************************************************************
- * System Logic and Peripherals (ELB, UART0, etc) device address space     *
+ * System Logic and Peripherals (ELB, UART0, etc) device address space	   *
  ***************************************************************************
  */
 #define MSP_SLP_BASE		0x1c000000
@@ -53,69 +53,69 @@
 #define MSP_RST_SIZE		0x0C	/* System reset register space	*/
 
 #define MSP_WTIMER_BASE		(MSP_SLP_BASE + 0x04C)
-					/* watchdog timer base          */
+					/* watchdog timer base		*/
 #define MSP_ITIMER_BASE		(MSP_SLP_BASE + 0x054)
-					/* internal timer base          */
+					/* internal timer base		*/
 #define MSP_UART0_BASE		(MSP_SLP_BASE + 0x100)
-					/* UART0 controller base        */
+					/* UART0 controller base	*/
 #define MSP_BCPY_CTRL_BASE	(MSP_SLP_BASE + 0x120)
-					/* Block Copy controller base   */
+					/* Block Copy controller base	*/
 #define MSP_BCPY_DESC_BASE	(MSP_SLP_BASE + 0x160)
-					/* Block Copy descriptor base   */
+					/* Block Copy descriptor base	*/
 
 /*
  ***************************************************************************
- * PCI address space                                                       *
+ * PCI address space							   *
  ***************************************************************************
  */
 #define MSP_PCI_BASE		0x19000000
 
 /*
  ***************************************************************************
- * MSbus device address space                                              *
+ * MSbus device address space						   *
  ***************************************************************************
  */
 #define MSP_MSB_BASE		0x18000000
-					/* MSbus address start          */
+					/* MSbus address start		*/
 #define MSP_PER_BASE		(MSP_MSB_BASE + 0x400000)
-					/* Peripheral device registers  */
+					/* Peripheral device registers	*/
 #define MSP_MAC0_BASE		(MSP_MSB_BASE + 0x600000)
-					/* MAC A device registers       */
+					/* MAC A device registers	*/
 #define MSP_MAC1_BASE		(MSP_MSB_BASE + 0x700000)
-					/* MAC B device registers       */
+					/* MAC B device registers	*/
 #define MSP_MAC_SIZE		0xE0	/* MAC register space		*/
 
 #define MSP_SEC_BASE		(MSP_MSB_BASE + 0x800000)
-					/* Security Engine registers    */
+					/* Security Engine registers	*/
 #define MSP_MAC2_BASE		(MSP_MSB_BASE + 0x900000)
-					/* MAC C device registers       */
+					/* MAC C device registers	*/
 #define MSP_ADSL2_BASE		(MSP_MSB_BASE + 0xA80000)
-					/* ADSL2 device registers       */
+					/* ADSL2 device registers	*/
 #define MSP_USB0_BASE		(MSP_MSB_BASE + 0xB00000)
-					/* USB0 device registers        */
+					/* USB0 device registers	*/
 #define MSP_USB1_BASE		(MSP_MSB_BASE + 0x300000)
 					/* USB1 device registers	*/
 #define MSP_CPUIF_BASE		(MSP_MSB_BASE + 0xC00000)
-					/* CPU interface registers      */
+					/* CPU interface registers	*/
 
 /* Devices within the MSbus peripheral block */
 #define MSP_UART1_BASE		(MSP_PER_BASE + 0x030)
-					/* UART1 controller base        */
+					/* UART1 controller base	*/
 #define MSP_SPI_BASE		(MSP_PER_BASE + 0x058)
-					/* SPI/MPI control registers    */
+					/* SPI/MPI control registers	*/
 #define MSP_TWI_BASE		(MSP_PER_BASE + 0x090)
-					/* Two-wire control registers   */
+					/* Two-wire control registers	*/
 #define MSP_PTIMER_BASE		(MSP_PER_BASE + 0x0F0)
-					/* Programmable timer control   */
+					/* Programmable timer control	*/
 
 /*
  ***************************************************************************
- * Physical Memory configuration address space                             *
+ * Physical Memory configuration address space				   *
  ***************************************************************************
  */
 #define MSP_MEM_CFG_BASE	0x17f00000
 
-#define MSP_MEM_INDIRECT_CTL_10	0x10
+#define MSP_MEM_INDIRECT_CTL_10 0x10
 
 /*
  * Notes:
@@ -130,10 +130,10 @@
  *  3) These constants are for physical addresses which means that they
  *     work correctly with "ioremap" and friends.  This means that device
  *     drivers will need to remap these addresses using ioremap and perhaps
- *     the readw/writew macros.  Or they could use the regptr() macro
+ *     the readw/writew macros.	 Or they could use the regptr() macro
  *     defined below, but the readw/writew calls are the correct thing.
  *  4) The UARTs have an additional status register offset from the base
- *     address.  This register isn't used in the standard 8250 driver but
+ *     address.	 This register isn't used in the standard 8250 driver but
  *     may be used in other software.  Consult the hardware datasheet for
  *     offset details.
  *  5) For some unknown reason the security engine (MSP_SEC_BASE) registers
@@ -163,44 +163,44 @@
 
 /*
  ***************************************************************************
- * System Logic and Peripherals (RESET, ELB, etc) registers                *
+ * System Logic and Peripherals (RESET, ELB, etc) registers		   *
  ***************************************************************************
  */
 
 /* System Control register definitions */
-#define	DEV_ID_REG	regptr(MSP_SLP_BASE + 0x00)
-					/* Device-ID                 RO */
-#define	FWR_ID_REG	regptr(MSP_SLP_BASE + 0x04)
-					/* Firmware-ID Register      RW */
-#define	SYS_ID_REG0	regptr(MSP_SLP_BASE + 0x08)
-					/* System-ID Register-0      RW */
-#define	SYS_ID_REG1	regptr(MSP_SLP_BASE + 0x0C)
-					/* System-ID Register-1      RW */
+#define DEV_ID_REG	regptr(MSP_SLP_BASE + 0x00)
+					/* Device-ID		     RO */
+#define FWR_ID_REG	regptr(MSP_SLP_BASE + 0x04)
+					/* Firmware-ID Register	     RW */
+#define SYS_ID_REG0	regptr(MSP_SLP_BASE + 0x08)
+					/* System-ID Register-0	     RW */
+#define SYS_ID_REG1	regptr(MSP_SLP_BASE + 0x0C)
+					/* System-ID Register-1	     RW */
 
 /* System Reset register definitions */
-#define	RST_STS_REG	regptr(MSP_SLP_BASE + 0x10)
-					/* System Reset Status       RO */
-#define	RST_SET_REG	regptr(MSP_SLP_BASE + 0x14)
-					/* System Set Reset          WO */
-#define	RST_CLR_REG	regptr(MSP_SLP_BASE + 0x18)
-					/* System Clear Reset        WO */
+#define RST_STS_REG	regptr(MSP_SLP_BASE + 0x10)
+					/* System Reset Status	     RO */
+#define RST_SET_REG	regptr(MSP_SLP_BASE + 0x14)
+					/* System Set Reset	     WO */
+#define RST_CLR_REG	regptr(MSP_SLP_BASE + 0x18)
+					/* System Clear Reset	     WO */
 
 /* System Clock Registers */
 #define PCI_SLP_REG	regptr(MSP_SLP_BASE + 0x1C)
-					/* PCI clock generator       RW */
+					/* PCI clock generator	     RW */
 #define URT_SLP_REG	regptr(MSP_SLP_BASE + 0x20)
-					/* UART clock generator      RW */
-/* reserved		      (MSP_SLP_BASE + 0x24)                     */
-/* reserved		      (MSP_SLP_BASE + 0x28)                     */
+					/* UART clock generator	     RW */
+/* reserved		      (MSP_SLP_BASE + 0x24)			*/
+/* reserved		      (MSP_SLP_BASE + 0x28)			*/
 #define PLL1_SLP_REG	regptr(MSP_SLP_BASE + 0x2C)
-					/* PLL1 clock generator      RW */
+					/* PLL1 clock generator	     RW */
 #define PLL0_SLP_REG	regptr(MSP_SLP_BASE + 0x30)
-					/* PLL0 clock generator      RW */
+					/* PLL0 clock generator	     RW */
 #define MIPS_SLP_REG	regptr(MSP_SLP_BASE + 0x34)
-					/* MIPS clock generator      RW */
-#define	VE_SLP_REG	regptr(MSP_SLP_BASE + 0x38)
+					/* MIPS clock generator	     RW */
+#define VE_SLP_REG	regptr(MSP_SLP_BASE + 0x38)
 					/* Voice Eng clock generator RW */
-/* reserved		      (MSP_SLP_BASE + 0x3C)                     */
+/* reserved		      (MSP_SLP_BASE + 0x3C)			*/
 #define MSB_SLP_REG	regptr(MSP_SLP_BASE + 0x40)
 					/* MS-Bus clock generator    RW */
 #define SMAC_SLP_REG	regptr(MSP_SLP_BASE + 0x44)
@@ -216,108 +216,108 @@
 #define SE_MBOX_REG	regptr(MSP_SLP_BASE + 0x78)
 					/* Security Engine mailbox   RW */
 #define VE_MBOX_REG	regptr(MSP_SLP_BASE + 0x7C)
-					/* Voice Engine mailbox      RW */
+					/* Voice Engine mailbox	     RW */
 
 /* ELB Controller Registers */
 #define CS0_CNFG_REG	regptr(MSP_SLP_BASE + 0x80)
-					/* ELB CS0 Configuration Reg    */
+					/* ELB CS0 Configuration Reg	*/
 #define CS0_ADDR_REG	regptr(MSP_SLP_BASE + 0x84)
-					/* ELB CS0 Base Address Reg     */
+					/* ELB CS0 Base Address Reg	*/
 #define CS0_MASK_REG	regptr(MSP_SLP_BASE + 0x88)
-					/* ELB CS0 Mask Register        */
+					/* ELB CS0 Mask Register	*/
 #define CS0_ACCESS_REG	regptr(MSP_SLP_BASE + 0x8C)
-					/* ELB CS0 access register      */
+					/* ELB CS0 access register	*/
 
 #define CS1_CNFG_REG	regptr(MSP_SLP_BASE + 0x90)
-					/* ELB CS1 Configuration Reg    */
+					/* ELB CS1 Configuration Reg	*/
 #define CS1_ADDR_REG	regptr(MSP_SLP_BASE + 0x94)
-					/* ELB CS1 Base Address Reg     */
+					/* ELB CS1 Base Address Reg	*/
 #define CS1_MASK_REG	regptr(MSP_SLP_BASE + 0x98)
-					/* ELB CS1 Mask Register        */
+					/* ELB CS1 Mask Register	*/
 #define CS1_ACCESS_REG	regptr(MSP_SLP_BASE + 0x9C)
-					/* ELB CS1 access register      */
+					/* ELB CS1 access register	*/
 
 #define CS2_CNFG_REG	regptr(MSP_SLP_BASE + 0xA0)
-					/* ELB CS2 Configuration Reg    */
+					/* ELB CS2 Configuration Reg	*/
 #define CS2_ADDR_REG	regptr(MSP_SLP_BASE + 0xA4)
-					/* ELB CS2 Base Address Reg     */
+					/* ELB CS2 Base Address Reg	*/
 #define CS2_MASK_REG	regptr(MSP_SLP_BASE + 0xA8)
-					/* ELB CS2 Mask Register        */
+					/* ELB CS2 Mask Register	*/
 #define CS2_ACCESS_REG	regptr(MSP_SLP_BASE + 0xAC)
-					/* ELB CS2 access register      */
+					/* ELB CS2 access register	*/
 
 #define CS3_CNFG_REG	regptr(MSP_SLP_BASE + 0xB0)
-					/* ELB CS3 Configuration Reg    */
+					/* ELB CS3 Configuration Reg	*/
 #define CS3_ADDR_REG	regptr(MSP_SLP_BASE + 0xB4)
-					/* ELB CS3 Base Address Reg     */
+					/* ELB CS3 Base Address Reg	*/
 #define CS3_MASK_REG	regptr(MSP_SLP_BASE + 0xB8)
-					/* ELB CS3 Mask Register        */
+					/* ELB CS3 Mask Register	*/
 #define CS3_ACCESS_REG	regptr(MSP_SLP_BASE + 0xBC)
-					/* ELB CS3 access register      */
+					/* ELB CS3 access register	*/
 
 #define CS4_CNFG_REG	regptr(MSP_SLP_BASE + 0xC0)
-					/* ELB CS4 Configuration Reg    */
+					/* ELB CS4 Configuration Reg	*/
 #define CS4_ADDR_REG	regptr(MSP_SLP_BASE + 0xC4)
-					/* ELB CS4 Base Address Reg     */
+					/* ELB CS4 Base Address Reg	*/
 #define CS4_MASK_REG	regptr(MSP_SLP_BASE + 0xC8)
-					/* ELB CS4 Mask Register        */
+					/* ELB CS4 Mask Register	*/
 #define CS4_ACCESS_REG	regptr(MSP_SLP_BASE + 0xCC)
-					/* ELB CS4 access register      */
+					/* ELB CS4 access register	*/
 
 #define CS5_CNFG_REG	regptr(MSP_SLP_BASE + 0xD0)
-					/* ELB CS5 Configuration Reg    */
+					/* ELB CS5 Configuration Reg	*/
 #define CS5_ADDR_REG	regptr(MSP_SLP_BASE + 0xD4)
-					/* ELB CS5 Base Address Reg     */
+					/* ELB CS5 Base Address Reg	*/
 #define CS5_MASK_REG	regptr(MSP_SLP_BASE + 0xD8)
-					/* ELB CS5 Mask Register        */
+					/* ELB CS5 Mask Register	*/
 #define CS5_ACCESS_REG	regptr(MSP_SLP_BASE + 0xDC)
-					/* ELB CS5 access register      */
+					/* ELB CS5 access register	*/
 
-/* reserved			       0xE0 - 0xE8                      */
+/* reserved			       0xE0 - 0xE8			*/
 #define ELB_1PC_EN_REG	regptr(MSP_SLP_BASE + 0xEC)
-					/* ELB single PC card detect    */
+					/* ELB single PC card detect	*/
 
-/* reserved			       0xF0 - 0xF8                      */
-#define ELB_CLK_CFG_REG	regptr(MSP_SLP_BASE + 0xFC)
-					/* SDRAM read/ELB timing Reg    */
+/* reserved			       0xF0 - 0xF8			*/
+#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC)
+					/* SDRAM read/ELB timing Reg	*/
 
 /* Extended UART status registers */
 #define UART0_STATUS_REG	regptr(MSP_UART0_BASE + 0x0c0)
-					/* UART Status Register 0       */
+					/* UART Status Register 0	*/
 #define UART1_STATUS_REG	regptr(MSP_UART1_BASE + 0x170)
-					/* UART Status Register 1       */
+					/* UART Status Register 1	*/
 
 /* Performance monitoring registers */
 #define PERF_MON_CTRL_REG	regptr(MSP_SLP_BASE + 0x140)
-					/* Performance monitor control  */
+					/* Performance monitor control	*/
 #define PERF_MON_CLR_REG	regptr(MSP_SLP_BASE + 0x144)
-					/* Performance monitor clear    */
+					/* Performance monitor clear	*/
 #define PERF_MON_CNTH_REG	regptr(MSP_SLP_BASE + 0x148)
-					/* Perf monitor counter high    */
+					/* Perf monitor counter high	*/
 #define PERF_MON_CNTL_REG	regptr(MSP_SLP_BASE + 0x14C)
-					/* Perf monitor counter low     */
+					/* Perf monitor counter low	*/
 
 /* System control registers */
 #define SYS_CTRL_REG		regptr(MSP_SLP_BASE + 0x150)
-					/* System control register      */
+					/* System control register	*/
 #define SYS_ERR1_REG		regptr(MSP_SLP_BASE + 0x154)
-					/* System Error status 1        */
+					/* System Error status 1	*/
 #define SYS_ERR2_REG		regptr(MSP_SLP_BASE + 0x158)
-					/* System Error status 2        */
+					/* System Error status 2	*/
 #define SYS_INT_CFG_REG		regptr(MSP_SLP_BASE + 0x15C)
-					/* System Interrupt config      */
+					/* System Interrupt config	*/
 
 /* Voice Engine Memory configuration */
 #define VE_MEM_REG		regptr(MSP_SLP_BASE + 0x17C)
-					/* Voice engine memory config   */
+					/* Voice engine memory config	*/
 
 /* CPU/SLP Error Status registers */
 #define CPU_ERR1_REG		regptr(MSP_SLP_BASE + 0x180)
-					/* CPU/SLP Error status 1       */
+					/* CPU/SLP Error status 1	*/
 #define CPU_ERR2_REG		regptr(MSP_SLP_BASE + 0x184)
-					/* CPU/SLP Error status 1       */
+					/* CPU/SLP Error status 1	*/
 
-/* Extended GPIO registers       */
+/* Extended GPIO registers	 */
 #define EXTENDED_GPIO1_REG	regptr(MSP_SLP_BASE + 0x188)
 #define EXTENDED_GPIO2_REG	regptr(MSP_SLP_BASE + 0x18c)
 #define EXTENDED_GPIO_REG	EXTENDED_GPIO1_REG
@@ -325,182 +325,182 @@
 
 /* System Error registers */
 #define SLP_ERR_STS_REG		regptr(MSP_SLP_BASE + 0x190)
-					/* Int status for SLP errors    */
+					/* Int status for SLP errors	*/
 #define SLP_ERR_MSK_REG		regptr(MSP_SLP_BASE + 0x194)
-					/* Int mask for SLP errors      */
+					/* Int mask for SLP errors	*/
 #define SLP_ELB_ERST_REG	regptr(MSP_SLP_BASE + 0x198)
-					/* External ELB reset           */
+					/* External ELB reset		*/
 #define SLP_BOOT_STS_REG	regptr(MSP_SLP_BASE + 0x19C)
-					/* Boot Status                  */
+					/* Boot Status			*/
 
 /* Extended ELB addressing */
 #define CS0_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A0)
-					/* CS0 Extended address         */
+					/* CS0 Extended address		*/
 #define CS1_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A4)
-					/* CS1 Extended address         */
+					/* CS1 Extended address		*/
 #define CS2_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1A8)
-					/* CS2 Extended address         */
+					/* CS2 Extended address		*/
 #define CS3_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1AC)
-					/* CS3 Extended address         */
-/* reserved					      0x1B0             */
+					/* CS3 Extended address		*/
+/* reserved					      0x1B0		*/
 #define CS5_EXT_ADDR_REG	regptr(MSP_SLP_BASE + 0x1B4)
-					/* CS5 Extended address         */
+					/* CS5 Extended address		*/
 
 /* PLL Adjustment registers */
 #define PLL_LOCK_REG		regptr(MSP_SLP_BASE + 0x200)
-					/* PLL0 lock status             */
+					/* PLL0 lock status		*/
 #define PLL_ARST_REG		regptr(MSP_SLP_BASE + 0x204)
-					/* PLL Analog reset status      */
+					/* PLL Analog reset status	*/
 #define PLL0_ADJ_REG		regptr(MSP_SLP_BASE + 0x208)
-					/* PLL0 Adjustment value        */
+					/* PLL0 Adjustment value	*/
 #define PLL1_ADJ_REG		regptr(MSP_SLP_BASE + 0x20C)
-					/* PLL1 Adjustment value        */
+					/* PLL1 Adjustment value	*/
 
 /*
  ***************************************************************************
- * Peripheral Register definitions                                         *
+ * Peripheral Register definitions					   *
  ***************************************************************************
  */
 
 /* Peripheral status */
 #define PER_CTRL_REG		regptr(MSP_PER_BASE + 0x50)
-					/* Peripheral control register  */
+					/* Peripheral control register	*/
 #define PER_STS_REG		regptr(MSP_PER_BASE + 0x54)
-					/* Peripheral status register   */
+					/* Peripheral status register	*/
 
 /* SPI/MPI Registers */
 #define SMPI_TX_SZ_REG		regptr(MSP_PER_BASE + 0x58)
-					/* SPI/MPI Tx Size register     */
+					/* SPI/MPI Tx Size register	*/
 #define SMPI_RX_SZ_REG		regptr(MSP_PER_BASE + 0x5C)
-					/* SPI/MPI Rx Size register     */
+					/* SPI/MPI Rx Size register	*/
 #define SMPI_CTL_REG		regptr(MSP_PER_BASE + 0x60)
-					/* SPI/MPI Control register     */
+					/* SPI/MPI Control register	*/
 #define SMPI_MS_REG		regptr(MSP_PER_BASE + 0x64)
-					/* SPI/MPI Chip Select reg      */
+					/* SPI/MPI Chip Select reg	*/
 #define SMPI_CORE_DATA_REG	regptr(MSP_PER_BASE + 0xC0)
-					/* SPI/MPI Core Data reg        */
+					/* SPI/MPI Core Data reg	*/
 #define SMPI_CORE_CTRL_REG	regptr(MSP_PER_BASE + 0xC4)
-					/* SPI/MPI Core Control reg     */
+					/* SPI/MPI Core Control reg	*/
 #define SMPI_CORE_STAT_REG	regptr(MSP_PER_BASE + 0xC8)
-					/* SPI/MPI Core Status reg      */
+					/* SPI/MPI Core Status reg	*/
 #define SMPI_CORE_SSEL_REG	regptr(MSP_PER_BASE + 0xCC)
-					/* SPI/MPI Core Ssel reg        */
+					/* SPI/MPI Core Ssel reg	*/
 #define SMPI_FIFO_REG		regptr(MSP_PER_BASE + 0xD0)
-					/* SPI/MPI Data FIFO reg        */
+					/* SPI/MPI Data FIFO reg	*/
 
-/* Peripheral Block Error Registers           */
+/* Peripheral Block Error Registers	      */
 #define PER_ERR_STS_REG		regptr(MSP_PER_BASE + 0x70)
-					/* Error Bit Status Register    */
+					/* Error Bit Status Register	*/
 #define PER_ERR_MSK_REG		regptr(MSP_PER_BASE + 0x74)
-					/* Error Bit Mask Register      */
+					/* Error Bit Mask Register	*/
 #define PER_HDR1_REG		regptr(MSP_PER_BASE + 0x78)
-					/* Error Header 1 Register      */
+					/* Error Header 1 Register	*/
 #define PER_HDR2_REG		regptr(MSP_PER_BASE + 0x7C)
-					/* Error Header 2 Register      */
+					/* Error Header 2 Register	*/
 
-/* Peripheral Block Interrupt Registers       */
+/* Peripheral Block Interrupt Registers	      */
 #define PER_INT_STS_REG		regptr(MSP_PER_BASE + 0x80)
-					/* Interrupt status register    */
+					/* Interrupt status register	*/
 #define PER_INT_MSK_REG		regptr(MSP_PER_BASE + 0x84)
-					/* Interrupt Mask Register      */
+					/* Interrupt Mask Register	*/
 #define GPIO_INT_STS_REG	regptr(MSP_PER_BASE + 0x88)
-					/* GPIO interrupt status reg    */
+					/* GPIO interrupt status reg	*/
 #define GPIO_INT_MSK_REG	regptr(MSP_PER_BASE + 0x8C)
-					/* GPIO interrupt MASK Reg      */
+					/* GPIO interrupt MASK Reg	*/
 
-/* POLO GPIO registers                        */
+/* POLO GPIO registers			      */
 #define POLO_GPIO_DAT1_REG	regptr(MSP_PER_BASE + 0x0E0)
-					/* Polo GPIO[8:0]  data reg     */
+					/* Polo GPIO[8:0]  data reg	*/
 #define POLO_GPIO_CFG1_REG	regptr(MSP_PER_BASE + 0x0E4)
-					/* Polo GPIO[7:0]  config reg   */
+					/* Polo GPIO[7:0]  config reg	*/
 #define POLO_GPIO_CFG2_REG	regptr(MSP_PER_BASE + 0x0E8)
-					/* Polo GPIO[15:8] config reg   */
+					/* Polo GPIO[15:8] config reg	*/
 #define POLO_GPIO_OD1_REG	regptr(MSP_PER_BASE + 0x0EC)
 					/* Polo GPIO[31:0] output drive */
 #define POLO_GPIO_CFG3_REG	regptr(MSP_PER_BASE + 0x170)
-					/* Polo GPIO[23:16] config reg  */
+					/* Polo GPIO[23:16] config reg	*/
 #define POLO_GPIO_DAT2_REG	regptr(MSP_PER_BASE + 0x174)
-					/* Polo GPIO[15:9]  data reg    */
+					/* Polo GPIO[15:9]  data reg	*/
 #define POLO_GPIO_DAT3_REG	regptr(MSP_PER_BASE + 0x178)
-					/* Polo GPIO[23:16]  data reg   */
+					/* Polo GPIO[23:16]  data reg	*/
 #define POLO_GPIO_DAT4_REG	regptr(MSP_PER_BASE + 0x17C)
-					/* Polo GPIO[31:24]  data reg   */
+					/* Polo GPIO[31:24]  data reg	*/
 #define POLO_GPIO_DAT5_REG	regptr(MSP_PER_BASE + 0x180)
-					/* Polo GPIO[39:32]  data reg   */
+					/* Polo GPIO[39:32]  data reg	*/
 #define POLO_GPIO_DAT6_REG	regptr(MSP_PER_BASE + 0x184)
-					/* Polo GPIO[47:40]  data reg   */
+					/* Polo GPIO[47:40]  data reg	*/
 #define POLO_GPIO_DAT7_REG	regptr(MSP_PER_BASE + 0x188)
-					/* Polo GPIO[54:48]  data reg   */
+					/* Polo GPIO[54:48]  data reg	*/
 #define POLO_GPIO_CFG4_REG	regptr(MSP_PER_BASE + 0x18C)
-					/* Polo GPIO[31:24] config reg  */
+					/* Polo GPIO[31:24] config reg	*/
 #define POLO_GPIO_CFG5_REG	regptr(MSP_PER_BASE + 0x190)
-					/* Polo GPIO[39:32] config reg  */
+					/* Polo GPIO[39:32] config reg	*/
 #define POLO_GPIO_CFG6_REG	regptr(MSP_PER_BASE + 0x194)
-					/* Polo GPIO[47:40] config reg  */
+					/* Polo GPIO[47:40] config reg	*/
 #define POLO_GPIO_CFG7_REG	regptr(MSP_PER_BASE + 0x198)
-					/* Polo GPIO[54:48] config reg  */
+					/* Polo GPIO[54:48] config reg	*/
 #define POLO_GPIO_OD2_REG	regptr(MSP_PER_BASE + 0x19C)
 					/* Polo GPIO[54:32] output drive */
 
-/* Generic GPIO registers                     */
+/* Generic GPIO registers		      */
 #define GPIO_DATA1_REG		regptr(MSP_PER_BASE + 0x170)
-					/* GPIO[1:0] data register      */
+					/* GPIO[1:0] data register	*/
 #define GPIO_DATA2_REG		regptr(MSP_PER_BASE + 0x174)
-					/* GPIO[5:2] data register      */
+					/* GPIO[5:2] data register	*/
 #define GPIO_DATA3_REG		regptr(MSP_PER_BASE + 0x178)
-					/* GPIO[9:6] data register      */
+					/* GPIO[9:6] data register	*/
 #define GPIO_DATA4_REG		regptr(MSP_PER_BASE + 0x17C)
-					/* GPIO[15:10] data register    */
+					/* GPIO[15:10] data register	*/
 #define GPIO_CFG1_REG		regptr(MSP_PER_BASE + 0x180)
-					/* GPIO[1:0] config register    */
+					/* GPIO[1:0] config register	*/
 #define GPIO_CFG2_REG		regptr(MSP_PER_BASE + 0x184)
-					/* GPIO[5:2] config register    */
+					/* GPIO[5:2] config register	*/
 #define GPIO_CFG3_REG		regptr(MSP_PER_BASE + 0x188)
-					/* GPIO[9:6] config register    */
+					/* GPIO[9:6] config register	*/
 #define GPIO_CFG4_REG		regptr(MSP_PER_BASE + 0x18C)
-					/* GPIO[15:10] config register  */
+					/* GPIO[15:10] config register	*/
 #define GPIO_OD_REG		regptr(MSP_PER_BASE + 0x190)
-					/* GPIO[15:0] output drive      */
+					/* GPIO[15:0] output drive	*/
 
 /*
  ***************************************************************************
- * CPU Interface register definitions                                      *
+ * CPU Interface register definitions					   *
  ***************************************************************************
  */
 #define PCI_FLUSH_REG		regptr(MSP_CPUIF_BASE + 0x00)
 					/* PCI-SDRAM queue flush trigger */
 #define OCP_ERR1_REG		regptr(MSP_CPUIF_BASE + 0x04)
-					/* OCP Error Attribute 1        */
+					/* OCP Error Attribute 1	*/
 #define OCP_ERR2_REG		regptr(MSP_CPUIF_BASE + 0x08)
-					/* OCP Error Attribute 2        */
+					/* OCP Error Attribute 2	*/
 #define OCP_STS_REG		regptr(MSP_CPUIF_BASE + 0x0C)
-					/* OCP Error Status             */
+					/* OCP Error Status		*/
 #define CPUIF_PM_REG		regptr(MSP_CPUIF_BASE + 0x10)
-					/* CPU policy configuration     */
+					/* CPU policy configuration	*/
 #define CPUIF_CFG_REG		regptr(MSP_CPUIF_BASE + 0x10)
-					/* Misc configuration options   */
+					/* Misc configuration options	*/
 
 /* Central Interrupt Controller Registers */
 #define MSP_CIC_BASE		(MSP_CPUIF_BASE + 0x8000)
-					/* Central Interrupt registers  */
+					/* Central Interrupt registers	*/
 #define CIC_EXT_CFG_REG		regptr(MSP_CIC_BASE + 0x00)
-					/* External interrupt config    */
+					/* External interrupt config	*/
 #define CIC_STS_REG		regptr(MSP_CIC_BASE + 0x04)
-					/* CIC Interrupt Status         */
+					/* CIC Interrupt Status		*/
 #define CIC_VPE0_MSK_REG	regptr(MSP_CIC_BASE + 0x08)
-					/* VPE0 Interrupt Mask          */
+					/* VPE0 Interrupt Mask		*/
 #define CIC_VPE1_MSK_REG	regptr(MSP_CIC_BASE + 0x0C)
-					/* VPE1 Interrupt Mask          */
+					/* VPE1 Interrupt Mask		*/
 #define CIC_TC0_MSK_REG		regptr(MSP_CIC_BASE + 0x10)
-					/* Thread Context 0 Int Mask    */
+					/* Thread Context 0 Int Mask	*/
 #define CIC_TC1_MSK_REG		regptr(MSP_CIC_BASE + 0x14)
-					/* Thread Context 1 Int Mask    */
+					/* Thread Context 1 Int Mask	*/
 #define CIC_TC2_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
-					/* Thread Context 2 Int Mask    */
+					/* Thread Context 2 Int Mask	*/
 #define CIC_TC3_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
-					/* Thread Context 3 Int Mask    */
+					/* Thread Context 3 Int Mask	*/
 #define CIC_TC4_MSK_REG		regptr(MSP_CIC_BASE + 0x18)
-					/* Thread Context 4 Int Mask    */
+					/* Thread Context 4 Int Mask	*/
 #define CIC_PCIMSI_STS_REG	regptr(MSP_CIC_BASE + 0x18)
 #define CIC_PCIMSI_MSK_REG	regptr(MSP_CIC_BASE + 0x18)
 #define CIC_PCIFLSH_REG		regptr(MSP_CIC_BASE + 0x18)
@@ -509,7 +509,7 @@
 
 /*
  ***************************************************************************
- * Memory controller registers                                             *
+ * Memory controller registers						   *
  ***************************************************************************
  */
 #define MEM_CFG1_REG		regptr(MSP_MEM_CFG_BASE + 0x00)
@@ -519,7 +519,7 @@
 
 /*
  ***************************************************************************
- * PCI controller registers                                                *
+ * PCI controller registers						   *
  ***************************************************************************
  */
 #define PCI_BASE_REG		regptr(MSP_PCI_BASE + 0x00)
@@ -528,25 +528,25 @@
 
 /*
  ########################################################################
- #  Register content & macro definitions                                #
+ #  Register content & macro definitions				#
  ########################################################################
  */
 
 /*
  ***************************************************************************
- * DEV_ID defines                                                          *
+ * DEV_ID defines							   *
  ***************************************************************************
  */
-#define DEV_ID_PCI_DIS		(1 << 26)       /* Set if PCI disabled */
-#define DEV_ID_PCI_HOST		(1 << 20)       /* Set if PCI host */
-#define DEV_ID_SINGLE_PC	(1 << 19)       /* Set if single PC Card */
-#define DEV_ID_FAMILY		(0xff << 8)     /* family ID code */
-#define POLO_ZEUS_SUB_FAMILY	(0x7  << 16)    /* sub family for Polo/Zeus */
+#define DEV_ID_PCI_DIS		(1 << 26)	/* Set if PCI disabled */
+#define DEV_ID_PCI_HOST		(1 << 20)	/* Set if PCI host */
+#define DEV_ID_SINGLE_PC	(1 << 19)	/* Set if single PC Card */
+#define DEV_ID_FAMILY		(0xff << 8)	/* family ID code */
+#define POLO_ZEUS_SUB_FAMILY	(0x7  << 16)	/* sub family for Polo/Zeus */
 
-#define MSPFPGA_ID		(0x00  << 8)    /* you are on your own here */
+#define MSPFPGA_ID		(0x00  << 8)	/* you are on your own here */
 #define MSP5000_ID		(0x50  << 8)
-#define MSP4F00_ID		(0x4f  << 8)    /* FPGA version of MSP4200 */
-#define MSP4E00_ID		(0x4f  << 8)    /* FPGA version of MSP7120 */
+#define MSP4F00_ID		(0x4f  << 8)	/* FPGA version of MSP4200 */
+#define MSP4E00_ID		(0x4f  << 8)	/* FPGA version of MSP7120 */
 #define MSP4200_ID		(0x42  << 8)
 #define MSP4000_ID		(0x40  << 8)
 #define MSP2XXX_ID		(0x20  << 8)
@@ -563,27 +563,27 @@
 
 /*
  ***************************************************************************
- * RESET defines                                                           *
+ * RESET defines							   *
  ***************************************************************************
  */
-#define MSP_GR_RST		(0x01 << 0)     /* Global reset bit     */
-#define MSP_MR_RST		(0x01 << 1)     /* MIPS reset bit       */
-#define MSP_PD_RST		(0x01 << 2)     /* PVC DMA reset bit    */
-#define MSP_PP_RST		(0x01 << 3)     /* PVC reset bit        */
-/* reserved                                                             */
-#define MSP_EA_RST		(0x01 << 6)     /* Mac A reset bit      */
-#define MSP_EB_RST		(0x01 << 7)     /* Mac B reset bit      */
-#define MSP_SE_RST		(0x01 << 8)     /* Security Eng reset bit */
-#define MSP_PB_RST		(0x01 << 9)     /* Per block reset bit  */
-#define MSP_EC_RST		(0x01 << 10)    /* Mac C reset bit      */
-#define MSP_TW_RST		(0x01 << 11)    /* TWI reset bit        */
-#define MSP_SPI_RST		(0x01 << 12)    /* SPI/MPI reset bit    */
-#define MSP_U1_RST		(0x01 << 13)    /* UART1 reset bit      */
-#define MSP_U0_RST		(0x01 << 14)    /* UART0 reset bit      */
+#define MSP_GR_RST		(0x01 << 0)	/* Global reset bit	*/
+#define MSP_MR_RST		(0x01 << 1)	/* MIPS reset bit	*/
+#define MSP_PD_RST		(0x01 << 2)	/* PVC DMA reset bit	*/
+#define MSP_PP_RST		(0x01 << 3)	/* PVC reset bit	*/
+/* reserved								*/
+#define MSP_EA_RST		(0x01 << 6)	/* Mac A reset bit	*/
+#define MSP_EB_RST		(0x01 << 7)	/* Mac B reset bit	*/
+#define MSP_SE_RST		(0x01 << 8)	/* Security Eng reset bit */
+#define MSP_PB_RST		(0x01 << 9)	/* Per block reset bit	*/
+#define MSP_EC_RST		(0x01 << 10)	/* Mac C reset bit	*/
+#define MSP_TW_RST		(0x01 << 11)	/* TWI reset bit	*/
+#define MSP_SPI_RST		(0x01 << 12)	/* SPI/MPI reset bit	*/
+#define MSP_U1_RST		(0x01 << 13)	/* UART1 reset bit	*/
+#define MSP_U0_RST		(0x01 << 14)	/* UART0 reset bit	*/
 
 /*
  ***************************************************************************
- * UART defines                                                            *
+ * UART defines								   *
  ***************************************************************************
  */
 #define MSP_BASE_BAUD		25000000
@@ -591,15 +591,15 @@
 
 /*
  ***************************************************************************
- * ELB defines                                                             *
+ * ELB defines								   *
  ***************************************************************************
  */
-#define PCCARD_32		0x02    /* Set if is PCCARD 32 (Cardbus) */
-#define SINGLE_PCCARD		0x01    /* Set to enable single PC card */
+#define PCCARD_32		0x02	/* Set if is PCCARD 32 (Cardbus) */
+#define SINGLE_PCCARD		0x01	/* Set to enable single PC card */
 
 /*
  ***************************************************************************
- * CIC defines                                                             *
+ * CIC defines								   *
  ***************************************************************************
  */
 
@@ -625,7 +625,7 @@
 
 /*
  ***************************************************************************
- * Memory Controller defines                                               *
+ * Memory Controller defines						   *
  ***************************************************************************
  */
 
@@ -644,17 +644,17 @@
 
 /*
  ***************************************************************************
- * SPI/MPI Mode                                                            *
+ * SPI/MPI Mode								   *
  ***************************************************************************
  */
 #define SPI_MPI_RX_BUSY		0x00008000	/* SPI/MPI Receive Busy */
-#define SPI_MPI_FIFO_EMPTY	0x00004000	/* SPI/MPI Fifo Empty   */
+#define SPI_MPI_FIFO_EMPTY	0x00004000	/* SPI/MPI Fifo Empty	*/
 #define SPI_MPI_TX_BUSY		0x00002000	/* SPI/MPI Transmit Busy */
-#define SPI_MPI_FIFO_FULL	0x00001000	/* SPI/MPU FIFO full    */
+#define SPI_MPI_FIFO_FULL	0x00001000	/* SPI/MPU FIFO full	*/
 
 /*
  ***************************************************************************
- * SPI/MPI Control Register                                                *
+ * SPI/MPI Control Register						   *
  ***************************************************************************
  */
 #define SPI_MPI_RX_START	0x00000004	/* Start receive command */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h
similarity index 63%
rename from arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h
rename to arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h
index 96d4c8c..51a66dc 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h
+++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h
@@ -27,9 +27,9 @@
 
 /*
  * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded
- * hierarchical system.  The first level are the direct MIPS interrupts
+ * hierarchical system.	 The first level are the direct MIPS interrupts
  * and are assigned the interrupt range 0-7.  The second level is the SLM
- * interrupt controller and is assigned the range 8-39.  The third level
+ * interrupt controller and is assigned the range 8-39.	 The third level
  * comprises the Peripherial block, the PCI block, the PCI MSI block and
  * the SLP.  The PCI interrupts and the SLP errors are handled by the
  * relevant subsystems so the core interrupt code needs only concern
@@ -41,11 +41,11 @@
  * IRQs directly connected to CPU
  */
 #define MSP_MIPS_INTBASE	0
-#define MSP_INT_SW0		0  /* IRQ for swint0,         C_SW0  */
-#define MSP_INT_SW1		1  /* IRQ for swint1,         C_SW1  */
-#define MSP_INT_MAC0 		2  /* IRQ for MAC 0,          C_IRQ0 */
-#define MSP_INT_MAC1		3  /* IRQ for MAC 1,          C_IRQ1 */
-#define MSP_INT_C_IRQ2		4  /* Wired off,              C_IRQ2 */
+#define MSP_INT_SW0		0  /* IRQ for swint0,	      C_SW0  */
+#define MSP_INT_SW1		1  /* IRQ for swint1,	      C_SW1  */
+#define MSP_INT_MAC0		2  /* IRQ for MAC 0,	      C_IRQ0 */
+#define MSP_INT_MAC1		3  /* IRQ for MAC 1,	      C_IRQ1 */
+#define MSP_INT_C_IRQ2		4  /* Wired off,	      C_IRQ2 */
 #define MSP_INT_VE		5  /* IRQ for Voice Engine,   C_IRQ3 */
 #define MSP_INT_SLP		6  /* IRQ for SLM block,      C_IRQ4 */
 #define MSP_INT_TIMER		7  /* IRQ for the MIPS timer, C_IRQ5 */
@@ -57,85 +57,85 @@
  */
 #define MSP_SLP_INTBASE		(MSP_MIPS_INTBASE + 8)
 #define MSP_INT_EXT0		(MSP_SLP_INTBASE + 0)
-					/* External interrupt 0         */
+					/* External interrupt 0		*/
 #define MSP_INT_EXT1		(MSP_SLP_INTBASE + 1)
-					/* External interrupt 1         */
+					/* External interrupt 1		*/
 #define MSP_INT_EXT2		(MSP_SLP_INTBASE + 2)
-					/* External interrupt 2         */
+					/* External interrupt 2		*/
 #define MSP_INT_EXT3		(MSP_SLP_INTBASE + 3)
-					/* External interrupt 3         */
-/* Reserved					   4-7                  */
+					/* External interrupt 3		*/
+/* Reserved					   4-7			*/
 
 /*
  *************************************************************************
  * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER *
- * Some MSP produces have this interrupt labelled as Voice and some are  *
- * SEC mbox ...                                                          *
+ * Some MSP produces have this interrupt labelled as Voice and some are	 *
+ * SEC mbox ...								 *
  *************************************************************************
  */
 #define MSP_INT_SLP_VE		(MSP_SLP_INTBASE + 8)
 					/* Cascaded IRQ for Voice Engine*/
 #define MSP_INT_SLP_TDM		(MSP_SLP_INTBASE + 9)
-					/* TDM interrupt                */
+					/* TDM interrupt		*/
 #define MSP_INT_SLP_MAC0	(MSP_SLP_INTBASE + 10)
-					/* Cascaded IRQ for MAC 0       */
+					/* Cascaded IRQ for MAC 0	*/
 #define MSP_INT_SLP_MAC1	(MSP_SLP_INTBASE + 11)
-					/* Cascaded IRQ for MAC 1       */
+					/* Cascaded IRQ for MAC 1	*/
 #define MSP_INT_SEC		(MSP_SLP_INTBASE + 12)
-					/* IRQ for security engine      */
-#define	MSP_INT_PER		(MSP_SLP_INTBASE + 13)
-					/* Peripheral interrupt         */
-#define	MSP_INT_TIMER0		(MSP_SLP_INTBASE + 14)
-					/* SLP timer 0                  */
-#define	MSP_INT_TIMER1		(MSP_SLP_INTBASE + 15)
-					/* SLP timer 1                  */
-#define	MSP_INT_TIMER2		(MSP_SLP_INTBASE + 16)
-					/* SLP timer 2                  */
-#define	MSP_INT_SLP_TIMER	(MSP_SLP_INTBASE + 17)
-					/* Cascaded MIPS timer          */
+					/* IRQ for security engine	*/
+#define MSP_INT_PER		(MSP_SLP_INTBASE + 13)
+					/* Peripheral interrupt		*/
+#define MSP_INT_TIMER0		(MSP_SLP_INTBASE + 14)
+					/* SLP timer 0			*/
+#define MSP_INT_TIMER1		(MSP_SLP_INTBASE + 15)
+					/* SLP timer 1			*/
+#define MSP_INT_TIMER2		(MSP_SLP_INTBASE + 16)
+					/* SLP timer 2			*/
+#define MSP_INT_SLP_TIMER	(MSP_SLP_INTBASE + 17)
+					/* Cascaded MIPS timer		*/
 #define MSP_INT_BLKCP		(MSP_SLP_INTBASE + 18)
-					/* Block Copy                   */
+					/* Block Copy			*/
 #define MSP_INT_UART0		(MSP_SLP_INTBASE + 19)
-					/* UART 0                       */
+					/* UART 0			*/
 #define MSP_INT_PCI		(MSP_SLP_INTBASE + 20)
-					/* PCI subsystem                */
+					/* PCI subsystem		*/
 #define MSP_INT_PCI_DBELL	(MSP_SLP_INTBASE + 21)
-					/* PCI doorbell                 */
+					/* PCI doorbell			*/
 #define MSP_INT_PCI_MSI		(MSP_SLP_INTBASE + 22)
-					/* PCI Message Signal           */
+					/* PCI Message Signal		*/
 #define MSP_INT_PCI_BC0		(MSP_SLP_INTBASE + 23)
-					/* PCI Block Copy 0             */
+					/* PCI Block Copy 0		*/
 #define MSP_INT_PCI_BC1		(MSP_SLP_INTBASE + 24)
-					/* PCI Block Copy 1             */
+					/* PCI Block Copy 1		*/
 #define MSP_INT_SLP_ERR		(MSP_SLP_INTBASE + 25)
-					/* SLP error condition          */
+					/* SLP error condition		*/
 #define MSP_INT_MAC2		(MSP_SLP_INTBASE + 26)
-					/* IRQ for MAC2                 */
-/* Reserved					   26-31                */
+					/* IRQ for MAC2			*/
+/* Reserved					   26-31		*/
 
 /*
  * IRQs cascaded on SLP PER interrupt (MSP_INT_PER)
  */
 #define MSP_PER_INTBASE		(MSP_SLP_INTBASE + 32)
-/* Reserved					   0-1                  */
+/* Reserved					   0-1			*/
 #define MSP_INT_UART1		(MSP_PER_INTBASE + 2)
-					/* UART 1                       */
-/* Reserved					   3-5                  */
+					/* UART 1			*/
+/* Reserved					   3-5			*/
 #define MSP_INT_2WIRE		(MSP_PER_INTBASE + 6)
-					/* 2-wire                       */
+					/* 2-wire			*/
 #define MSP_INT_TM0		(MSP_PER_INTBASE + 7)
 					/* Peripheral timer block out 0 */
 #define MSP_INT_TM1		(MSP_PER_INTBASE + 8)
 					/* Peripheral timer block out 1 */
-/* Reserved					   9                    */
+/* Reserved					   9			*/
 #define MSP_INT_SPRX		(MSP_PER_INTBASE + 10)
-					/* SPI RX complete              */
+					/* SPI RX complete		*/
 #define MSP_INT_SPTX		(MSP_PER_INTBASE + 11)
-					/* SPI TX complete              */
+					/* SPI TX complete		*/
 #define MSP_INT_GPIO		(MSP_PER_INTBASE + 12)
-					/* GPIO                         */
+					/* GPIO				*/
 #define MSP_INT_PER_ERR		(MSP_PER_INTBASE + 13)
-					/* Peripheral error             */
-/* Reserved					   14-31                */
+					/* Peripheral error		*/
+/* Reserved					   14-31		*/
 
 #endif /* !_MSP_SLP_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h
similarity index 98%
rename from arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h
rename to arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h
index 4c9348d..aa45e6a 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h
+++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h
@@ -40,7 +40,7 @@
 #define MSP_USB0_HS_END		(MSP_USB0_BASE + 0x401FF)
 
 /* Register spaces for USB host 1 */
-#define	MSP_USB1_MAB_START	(MSP_USB1_BASE + 0x0)
+#define MSP_USB1_MAB_START	(MSP_USB1_BASE + 0x0)
 #define MSP_USB1_MAB_END	(MSP_USB1_BASE + 0x17)
 #define MSP_USB1_ID_START	(MSP_USB1_BASE + 0x40000)
 #define MSP_USB1_ID_END		(MSP_USB1_BASE + 0x4008f)
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h b/arch/mips/include/asm/mach-pmcs-msp71xx/war.h
similarity index 90%
rename from arch/mips/include/asm/pmc-sierra/msp71xx/war.h
rename to arch/mips/include/asm/mach-pmcs-msp71xx/war.h
index c74eb16..a60bf9dd 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
+++ b/arch/mips/include/asm/mach-pmcs-msp71xx/war.h
@@ -21,9 +21,9 @@
 #define R10000_LLSC_WAR			0
 #if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \
 	defined(CONFIG_PMC_MSP7120_FPGA)
-#define MIPS34K_MISSED_ITLB_WAR         1
+#define MIPS34K_MISSED_ITLB_WAR		1
 #else
-#define MIPS34K_MISSED_ITLB_WAR         0
+#define MIPS34K_MISSED_ITLB_WAR		0
 #endif
 
 #endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */
diff --git a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h
index 6d70264..daa85ce 100644
--- a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h
+++ b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h
@@ -42,15 +42,15 @@
 #define PNX833X_TIMER_IRQ				(MIPS_CPU_IRQ_BASE + 7)
 
 /* Interrupts supported by PIC */
-#define PNX833X_PIC_I2C0_INT			(PNX833X_PIC_IRQ_BASE +  1)
-#define PNX833X_PIC_I2C1_INT			(PNX833X_PIC_IRQ_BASE +  2)
-#define PNX833X_PIC_UART0_INT			(PNX833X_PIC_IRQ_BASE +  3)
-#define PNX833X_PIC_UART1_INT			(PNX833X_PIC_IRQ_BASE +  4)
-#define PNX833X_PIC_TS_IN0_DV_INT		(PNX833X_PIC_IRQ_BASE +  5)
-#define PNX833X_PIC_TS_IN0_DMA_INT		(PNX833X_PIC_IRQ_BASE +  6)
-#define PNX833X_PIC_GPIO_INT			(PNX833X_PIC_IRQ_BASE +  7)
-#define PNX833X_PIC_AUDIO_DEC_INT		(PNX833X_PIC_IRQ_BASE +  8)
-#define PNX833X_PIC_VIDEO_DEC_INT		(PNX833X_PIC_IRQ_BASE +  9)
+#define PNX833X_PIC_I2C0_INT			(PNX833X_PIC_IRQ_BASE +	 1)
+#define PNX833X_PIC_I2C1_INT			(PNX833X_PIC_IRQ_BASE +	 2)
+#define PNX833X_PIC_UART0_INT			(PNX833X_PIC_IRQ_BASE +	 3)
+#define PNX833X_PIC_UART1_INT			(PNX833X_PIC_IRQ_BASE +	 4)
+#define PNX833X_PIC_TS_IN0_DV_INT		(PNX833X_PIC_IRQ_BASE +	 5)
+#define PNX833X_PIC_TS_IN0_DMA_INT		(PNX833X_PIC_IRQ_BASE +	 6)
+#define PNX833X_PIC_GPIO_INT			(PNX833X_PIC_IRQ_BASE +	 7)
+#define PNX833X_PIC_AUDIO_DEC_INT		(PNX833X_PIC_IRQ_BASE +	 8)
+#define PNX833X_PIC_VIDEO_DEC_INT		(PNX833X_PIC_IRQ_BASE +	 9)
 #define PNX833X_PIC_CONFIG_INT			(PNX833X_PIC_IRQ_BASE + 10)
 #define PNX833X_PIC_AOI_INT				(PNX833X_PIC_IRQ_BASE + 11)
 #define PNX833X_PIC_SYNC_INT			(PNX833X_PIC_IRQ_BASE + 12)
diff --git a/arch/mips/include/asm/mach-pnx833x/pnx833x.h b/arch/mips/include/asm/mach-pnx833x/pnx833x.h
index 100f528..e6fc3a9 100644
--- a/arch/mips/include/asm/mach-pnx833x/pnx833x.h
+++ b/arch/mips/include/asm/mach-pnx833x/pnx833x.h
@@ -73,7 +73,7 @@
 
 
 #define PNX833X_RESET_CONTROL		PNX833X_REG(0x8004)
-#define PNX833X_RESET_CONTROL_2 	PNX833X_REG(0x8014)
+#define PNX833X_RESET_CONTROL_2		PNX833X_REG(0x8014)
 
 #define PNX833X_PIC_REG(offs)		PNX833X_REG(0x01000 + (offs))
 #define PNX833X_PIC_INT_PRIORITY	PNX833X_PIC_REG(0x0)
@@ -82,10 +82,10 @@
 #define PNX833X_PIC_INT_SRC_INT_SRC_SHIFT	3
 #define PNX833X_PIC_INT_REG(irq)	PNX833X_PIC_REG(0x10 + 4*(irq))
 
-#define PNX833X_CLOCK_CPUCP_CTL	PNX833X_REG(0x9228)
+#define PNX833X_CLOCK_CPUCP_CTL PNX833X_REG(0x9228)
 #define PNX833X_CLOCK_CPUCP_CTL_EXIT_RESET	0x00000002ul	/* bit 1 */
 #define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_MASK	0x00000018ul	/* bits 4:3 */
-#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_SHIFT	3
+#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_SHIFT 3
 
 #define PNX8335_CLOCK_PLL_CPU_CTL		PNX833X_REG(0x9020)
 #define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_MASK	0x1f
@@ -149,7 +149,7 @@
 #define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_MASK	(1 << 14)
 #define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_SHIFT	14
 
-#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_MASK	(1 << 7)
+#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_MASK (1 << 7)
 #define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_SHIFT	7
 
 #define PNX833X_MIU_SEL0_BURST_PAGE_LEN_MASK	(0xF << 9)
@@ -160,10 +160,10 @@
 #define PNX833X_MIU_CONFIG_SPI_OPCODE_MASK	(0xFF << 3)
 #define PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT	3
 
-#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_MASK	(1 << 2)
+#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_MASK (1 << 2)
 #define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT	2
 
-#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_MASK	(1 << 1)
+#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_MASK (1 << 1)
 #define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT	1
 
 #define PNX833X_MIU_CONFIG_SPI_SYNC_MASK	(1 << 0)
diff --git a/arch/mips/include/asm/mach-pnx8550/cm.h b/arch/mips/include/asm/mach-pnx8550/cm.h
deleted file mode 100644
index bb0a56c..0000000
--- a/arch/mips/include/asm/mach-pnx8550/cm.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *   Clock module specific definitions
- *
- * Author: source@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-
-#ifndef __PNX8550_CM_H
-#define __PNX8550_CM_H
-
-#define PNX8550_CM_BASE	0xBBE47000
-
-#define PNX8550_CM_PLL0_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x000)
-#define PNX8550_CM_PLL1_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x004)
-#define PNX8550_CM_PLL2_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x008)
-#define PNX8550_CM_PLL3_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x00C)
-
-// Table not complete.....
-
-#define PNX8550_CM_PLL_BLOCKED_MASK     0x80000000
-#define PNX8550_CM_PLL_LOCK_MASK        0x40000000
-#define PNX8550_CM_PLL_CURRENT_ADJ_MASK 0x3c000000
-#define PNX8550_CM_PLL_N_MASK           0x01ff0000
-#define PNX8550_CM_PLL_M_MASK           0x00003f00
-#define PNX8550_CM_PLL_P_MASK           0x0000000c
-#define PNX8550_CM_PLL_PD_MASK          0x00000002
-
-
-#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/glb.h b/arch/mips/include/asm/mach-pnx8550/glb.h
deleted file mode 100644
index 07aa85e..0000000
--- a/arch/mips/include/asm/mach-pnx8550/glb.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *   PNX8550 global definitions
- *
- * Author: source@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-
-#ifndef __PNX8550_GLB_H
-#define __PNX8550_GLB_H
-
-#define PNX8550_GLB1_BASE	0xBBE63000
-#define PNX8550_GLB2_BASE	0xBBE4d000
-#define PNX8550_RESET_BASE      0xBBE60000
-
-/* PCI Inta Output Enable Registers */
-#define PNX8550_GLB2_ENAB_INTA_O	*(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050)
-
-/* Bit 1:Enable DAC Powerdown
-     0:DACs are enabled and are working normally
-     1:DACs are powerdown
-*/
-#define PNX8550_GLB_DAC_PD      0x2
-/*   Bit 0:Enable of PCI inta output
-     0 = Disable PCI inta output
-     1 = Enable PCI inta output
-*/
-#define PNX8550_GLB_ENABLE_INTA_O 0x1
-
-/* PCI Direct Mappings */
-#define PNX8550_PCIMEM	        0x12000000
-#define PNX8550_PCIMEM_SIZE	0x08000000
-#define PNX8550_PCIIO	        0x1c000000
-#define PNX8550_PCIIO_SIZE	0x02000000	/* 32M */
-
-#define PNX8550_PORT_BASE	KSEG1
-
-// GPIO def
-#define PNX8550_GPIO_BASE	0x1Be00000
-
-#define PNX8550_GPIO_DIRQ0	 (PNX8550_GPIO_BASE + 0x104500)
-#define PNX8550_GPIO_MC1         (PNX8550_GPIO_BASE + 0x104004)
-#define PNX8550_GPIO_MC_31_BIT   30
-#define PNX8550_GPIO_MC_30_BIT   28
-#define PNX8550_GPIO_MC_29_BIT   26
-#define PNX8550_GPIO_MC_28_BIT   24
-#define PNX8550_GPIO_MC_27_BIT   22
-#define PNX8550_GPIO_MC_26_BIT   20
-#define PNX8550_GPIO_MC_25_BIT   18
-#define PNX8550_GPIO_MC_24_BIT   16
-#define PNX8550_GPIO_MC_23_BIT   14
-#define PNX8550_GPIO_MC_22_BIT   12
-#define PNX8550_GPIO_MC_21_BIT   10
-#define PNX8550_GPIO_MC_20_BIT   8
-#define PNX8550_GPIO_MC_19_BIT   6
-#define PNX8550_GPIO_MC_18_BIT   4
-#define PNX8550_GPIO_MC_17_BIT   2
-#define PNX8550_GPIO_MC_16_BIT   0
-
-#define PNX8550_GPIO_MODE_PRIMOP    0x1
-#define PNX8550_GPIO_MODE_NO_OPENDR 0x2
-#define PNX8550_GPIO_MODE_OPENDR    0x3
-
-// RESET module
-#define PNX8550_RST_CTL             *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0)
-#define PNX8550_RST_CAUSE           *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4)
-#define PNX8550_RST_EN_WATCHDOG     *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8)
-
-#define PNX8550_RST_REL_MIPS_RST_N     0x8
-#define PNX8550_RST_DO_SW_RST          0x4
-#define PNX8550_RST_REL_SYS_RST_OUT    0x2
-#define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1
-#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/int.h b/arch/mips/include/asm/mach-pnx8550/int.h
deleted file mode 100644
index 0e0668b..0000000
--- a/arch/mips/include/asm/mach-pnx8550/int.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *   Interrupt specific definitions
- *
- * Author: source@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-
-#ifndef __PNX8550_INT_H
-#define __PNX8550_INT_H
-
-#define PNX8550_GIC_BASE	0xBBE3E000
-
-#define PNX8550_GIC_PRIMASK_0	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x000)
-#define PNX8550_GIC_PRIMASK_1	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x004)
-#define PNX8550_GIC_VECTOR_0	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x100)
-#define PNX8550_GIC_VECTOR_1	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x104)
-#define PNX8550_GIC_PEND_1_31	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x200)
-#define PNX8550_GIC_PEND_32_63	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x204)
-#define PNX8550_GIC_PEND_64_70	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x208)
-#define PNX8550_GIC_FEATURES	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x300)
-#define PNX8550_GIC_REQ(x)	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x400 + (x)*4)
-#define PNX8550_GIC_MOD_ID	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0xFFC)
-
-// cp0 is two software + six hw exceptions
-#define PNX8550_INT_CP0_TOTINT	8
-#define PNX8550_INT_CP0_MIN	0
-#define PNX8550_INT_CP0_MAX	(PNX8550_INT_CP0_MIN + PNX8550_INT_CP0_TOTINT - 1)
-
-#define MIPS_CPU_GIC_IRQ        2
-#define MIPS_CPU_TIMER_IRQ      7
-
-// GIC are 71 exceptions connected to cp0's first hardware exception
-#define PNX8550_INT_GIC_TOTINT	71
-#define PNX8550_INT_GIC_MIN	(PNX8550_INT_CP0_MAX+1)
-#define PNX8550_INT_GIC_MAX	(PNX8550_INT_GIC_MIN + PNX8550_INT_GIC_TOTINT - 1)
-
-#define PNX8550_INT_UNDEF              (PNX8550_INT_GIC_MIN+0)
-#define PNX8550_INT_IPC_TARGET0_MIPS   (PNX8550_INT_GIC_MIN+1)
-#define PNX8550_INT_IPC_TARGET1_TM32_1 (PNX8550_INT_GIC_MIN+2)
-#define PNX8550_INT_IPC_TARGET1_TM32_2 (PNX8550_INT_GIC_MIN+3)
-#define PNX8550_INT_RESERVED_4         (PNX8550_INT_GIC_MIN+4)
-#define PNX8550_INT_USB                (PNX8550_INT_GIC_MIN+5)
-#define PNX8550_INT_GPIO_EQ1           (PNX8550_INT_GIC_MIN+6)
-#define PNX8550_INT_GPIO_EQ2           (PNX8550_INT_GIC_MIN+7)
-#define PNX8550_INT_GPIO_EQ3           (PNX8550_INT_GIC_MIN+8)
-#define PNX8550_INT_GPIO_EQ4           (PNX8550_INT_GIC_MIN+9)
-
-#define PNX8550_INT_GPIO_EQ5           (PNX8550_INT_GIC_MIN+10)
-#define PNX8550_INT_GPIO_EQ6           (PNX8550_INT_GIC_MIN+11)
-#define PNX8550_INT_RESERVED_12        (PNX8550_INT_GIC_MIN+12)
-#define PNX8550_INT_QVCP1              (PNX8550_INT_GIC_MIN+13)
-#define PNX8550_INT_QVCP2              (PNX8550_INT_GIC_MIN+14)
-#define PNX8550_INT_I2C1               (PNX8550_INT_GIC_MIN+15)
-#define PNX8550_INT_I2C2               (PNX8550_INT_GIC_MIN+16)
-#define PNX8550_INT_ISO_UART1          (PNX8550_INT_GIC_MIN+17)
-#define PNX8550_INT_ISO_UART2          (PNX8550_INT_GIC_MIN+18)
-#define PNX8550_INT_UART1              (PNX8550_INT_GIC_MIN+19)
-
-#define PNX8550_INT_UART2              (PNX8550_INT_GIC_MIN+20)
-#define PNX8550_INT_QNTR               (PNX8550_INT_GIC_MIN+21)
-#define PNX8550_INT_RESERVED22         (PNX8550_INT_GIC_MIN+22)
-#define PNX8550_INT_T_DSC              (PNX8550_INT_GIC_MIN+23)
-#define PNX8550_INT_M_DSC              (PNX8550_INT_GIC_MIN+24)
-#define PNX8550_INT_RESERVED25         (PNX8550_INT_GIC_MIN+25)
-#define PNX8550_INT_2D_DRAW_ENG        (PNX8550_INT_GIC_MIN+26)
-#define PNX8550_INT_MEM_BASED_SCALAR1  (PNX8550_INT_GIC_MIN+27)
-#define PNX8550_INT_VIDEO_MPEG         (PNX8550_INT_GIC_MIN+28)
-#define PNX8550_INT_VIDEO_INPUT_P1     (PNX8550_INT_GIC_MIN+29)
-
-#define PNX8550_INT_VIDEO_INPUT_P2     (PNX8550_INT_GIC_MIN+30)
-#define PNX8550_INT_SPDI1              (PNX8550_INT_GIC_MIN+31)
-#define PNX8550_INT_SPDO               (PNX8550_INT_GIC_MIN+32)
-#define PNX8550_INT_AUDIO_INPUT1       (PNX8550_INT_GIC_MIN+33)
-#define PNX8550_INT_AUDIO_OUTPUT1      (PNX8550_INT_GIC_MIN+34)
-#define PNX8550_INT_AUDIO_INPUT2       (PNX8550_INT_GIC_MIN+35)
-#define PNX8550_INT_AUDIO_OUTPUT2      (PNX8550_INT_GIC_MIN+36)
-#define PNX8550_INT_MEMBASED_SCALAR2   (PNX8550_INT_GIC_MIN+37)
-#define PNX8550_INT_VPK                (PNX8550_INT_GIC_MIN+38)
-#define PNX8550_INT_MPEG1_MIPS         (PNX8550_INT_GIC_MIN+39)
-
-#define PNX8550_INT_MPEG1_TM           (PNX8550_INT_GIC_MIN+40)
-#define PNX8550_INT_MPEG2_MIPS         (PNX8550_INT_GIC_MIN+41)
-#define PNX8550_INT_MPEG2_TM           (PNX8550_INT_GIC_MIN+42)
-#define PNX8550_INT_TS_DMA             (PNX8550_INT_GIC_MIN+43)
-#define PNX8550_INT_EDMA               (PNX8550_INT_GIC_MIN+44)
-#define PNX8550_INT_TM_DEBUG1          (PNX8550_INT_GIC_MIN+45)
-#define PNX8550_INT_TM_DEBUG2          (PNX8550_INT_GIC_MIN+46)
-#define PNX8550_INT_PCI_INTA           (PNX8550_INT_GIC_MIN+47)
-#define PNX8550_INT_CLOCK_MODULE       (PNX8550_INT_GIC_MIN+48)
-#define PNX8550_INT_PCI_XIO_INTA_PCI   (PNX8550_INT_GIC_MIN+49)
-
-#define PNX8550_INT_PCI_XIO_INTB_DMA   (PNX8550_INT_GIC_MIN+50)
-#define PNX8550_INT_PCI_XIO_INTC_GPPM  (PNX8550_INT_GIC_MIN+51)
-#define PNX8550_INT_PCI_XIO_INTD_GPXIO (PNX8550_INT_GIC_MIN+52)
-#define PNX8550_INT_DVD_CSS            (PNX8550_INT_GIC_MIN+53)
-#define PNX8550_INT_VLD                (PNX8550_INT_GIC_MIN+54)
-#define PNX8550_INT_GPIO_TSU_7_0       (PNX8550_INT_GIC_MIN+55)
-#define PNX8550_INT_GPIO_TSU_15_8      (PNX8550_INT_GIC_MIN+56)
-#define PNX8550_INT_GPIO_CTU_IR        (PNX8550_INT_GIC_MIN+57)
-#define PNX8550_INT_GPIO0              (PNX8550_INT_GIC_MIN+58)
-#define PNX8550_INT_GPIO1              (PNX8550_INT_GIC_MIN+59)
-
-#define PNX8550_INT_GPIO2              (PNX8550_INT_GIC_MIN+60)
-#define PNX8550_INT_GPIO3              (PNX8550_INT_GIC_MIN+61)
-#define PNX8550_INT_GPIO4              (PNX8550_INT_GIC_MIN+62)
-#define PNX8550_INT_GPIO5              (PNX8550_INT_GIC_MIN+63)
-#define PNX8550_INT_GPIO6              (PNX8550_INT_GIC_MIN+64)
-#define PNX8550_INT_GPIO7              (PNX8550_INT_GIC_MIN+65)
-#define PNX8550_INT_PMAN_SECURITY      (PNX8550_INT_GIC_MIN+66)
-#define PNX8550_INT_I2C3               (PNX8550_INT_GIC_MIN+67)
-#define PNX8550_INT_RESERVED_68        (PNX8550_INT_GIC_MIN+68)
-#define PNX8550_INT_SPDI2              (PNX8550_INT_GIC_MIN+69)
-
-#define PNX8550_INT_I2C4               (PNX8550_INT_GIC_MIN+70)
-
-// Timer are 3 exceptions connected to cp0's 7th hardware exception
-#define PNX8550_INT_TIMER_TOTINT       3
-#define PNX8550_INT_TIMER_MIN	       (PNX8550_INT_GIC_MAX+1)
-#define PNX8550_INT_TIMER_MAX          (PNX8550_INT_TIMER_MIN + PNX8550_INT_TIMER_TOTINT - 1)
-
-#define PNX8550_INT_TIMER1             (PNX8550_INT_TIMER_MIN+0)
-#define PNX8550_INT_TIMER2             (PNX8550_INT_TIMER_MIN+1)
-#define PNX8550_INT_TIMER3             (PNX8550_INT_TIMER_MIN+2)
-#define PNX8550_INT_WATCHDOG           PNX8550_INT_TIMER3
-
-#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h b/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h
deleted file mode 100644
index bdde00c..0000000
--- a/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 Embedded Alley Solutions, Inc
- */
-#ifndef __ASM_MACH_KERNEL_ENTRY_INIT_H
-#define __ASM_MACH_KERNEL_ENTRY_INIT_H
-
-#include <asm/cacheops.h>
-#include <asm/addrspace.h>
-
-#define CO_CONFIGPR_VALID  0x3F1F41FF    /* valid bits to write to ConfigPR */
-#define HAZARD_CP0 nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;
-#define CACHE_OPC      0xBC000000  /* MIPS cache instruction opcode */
-#define ICACHE_LINE_SIZE        32      /* Instruction cache line size bytes */
-#define DCACHE_LINE_SIZE        32      /* Data cache line size in bytes */
-
-#define ICACHE_SET_COUNT        256     /* Instruction cache set count */
-#define DCACHE_SET_COUNT        128     /* Data cache set count */
-
-#define ICACHE_SET_SIZE         (ICACHE_SET_COUNT * ICACHE_LINE_SIZE)
-#define DCACHE_SET_SIZE         (DCACHE_SET_COUNT * DCACHE_LINE_SIZE)
-
-	.macro	kernel_entry_setup
-	.set	push
-	.set	noreorder
-	/*
-	 * PNX8550 entry point, when running a non compressed
-	 * kernel. When loading a zImage, the head.S code in
-	 * arch/mips/zboot/pnx8550 will init the caches and,
-	 * decompress the kernel, and branch to kernel_entry.
-		 */
-cache_begin:	li	t0, (1<<28)
-	mtc0	t0, CP0_STATUS /* cp0 usable */
-	HAZARD_CP0
-
-	mtc0 	zero, CP0_CAUSE
-	HAZARD_CP0
-
-
-	/* Set static virtual to phys address translation and TLB disabled */
-	mfc0 	t0, CP0_CONFIG, 7
-	HAZARD_CP0
-
-	and	t0, ~((1<<19) | (1<<20))     /* TLB/MAP cleared */
-	mtc0	t0, CP0_CONFIG, 7
-	HAZARD_CP0
-
-	/* CPU boots with kseg0 cache algo set to 0x2 -- uncached */
-
-	init_icache
-	nop
-	init_dcache
-	nop
-
-	cachePr4450ICReset
-	nop
-
-	cachePr4450DCReset
-	nop
-
-	/* read ConfigPR into t0 */
-	mfc0	t0, CP0_CONFIG, 7
-	HAZARD_CP0
-
-	/*  enable the TLB */
-	or      t0, (1<<19)
-
-	/* disable the ICACHE: at least 10x slower */
-	/* or      t0, (1<<26) */
-
-	/* disable the DCACHE; CONFIG_CPU_HAS_LLSC should not be set  */
-	/* or      t0, (1<<27) */
-
-	and	t0, CO_CONFIGPR_VALID
-
-	/* enable TLB. */
-	mtc0	t0, CP0_CONFIG, 7
-	HAZARD_CP0
-cache_end:
-	/* Setup CMEM_0 to MMIO address space, 2MB */
-	lui    t0, 0x1BE0
-	addi   t0, t0, 0x3
-	mtc0   $8, $22, 4
-	nop
-
-	/* Setup CMEM_1, 128MB */
-	lui    t0, 0x1000
-	addi   t0, t0, 0xf
-	mtc0   $8, $22, 5
-	nop
-
-
-	/* Setup CMEM_2, 32MB */
-	lui    t0, 0x1C00
-	addi   t0, t0, 0xb
-	mtc0   $8, $22, 6
-	nop
-
-	/* Setup CMEM_3, 0MB */
-	lui    t0, 0x0
-	addi   t0, t0, 0x0
-	mtc0   $8, $22, 7
-	nop
-
-	/* Enable cache */
-	mfc0	t0, CP0_CONFIG
-	HAZARD_CP0
-	and	t0, t0, 0xFFFFFFF8
-	or	t0, t0, 3
-	mtc0	t0, CP0_CONFIG
-	HAZARD_CP0
-	.set	pop
-	.endm
-
-	.macro	init_icache
-	.set	push
-	.set	noreorder
-
-	/* Get Cache Configuration */
-	mfc0	t3, CP0_CONFIG, 1
-	HAZARD_CP0
-
-	/* get cache Line size */
-
-	srl   t1, t3, 19   /* C0_CONFIGPR_IL_SHIFT */
-	andi  t1, t1, 0x7  /* C0_CONFIGPR_IL_MASK */
-	beq   t1, zero, pr4450_instr_cache_invalidated /* if zero instruction cache is absent */
-	nop
-	addiu t0, t1, 1
-	ori   t1, zero, 1
-	sllv  t1, t1, t0
-
-	/* get max cache Index */
-	srl   t2, t3, 22  /* C0_CONFIGPR_IS_SHIFT */
-	andi  t2, t2, 0x7 /* C0_CONFIGPR_IS_MASK */
-	addiu t0, t2, 6
-	ori   t2, zero, 1
-	sllv  t2, t2, t0
-
-	/* get max cache way */
-	srl   t3, t3, 16  /* C0_CONFIGPR_IA_SHIFT */
-	andi  t3, t3, 0x7 /* C0_CONFIGPR_IA_MASK */
-	addiu t3, t3, 1
-
-	/* total no of cache lines */
-	multu t2, t3             /* max index * max way */
-	mflo  t2
-	addiu t2, t2, -1
-
-	move  t0, zero
-pr4450_next_instruction_cache_set:
-	cache  Index_Invalidate_I, 0(t0)
-	addu  t0, t0, t1         /* add bytes in a line */
-	bne   t2, zero, pr4450_next_instruction_cache_set
-	addiu t2, t2, -1   /* reduce no of lines to invalidate by one */
-pr4450_instr_cache_invalidated:
-	.set	pop
-	.endm
-
-	.macro	init_dcache
-	.set	push
-	.set	noreorder
-	move t1, zero
-
-	/* Store Tag Information */
-	mtc0	zero, CP0_TAGLO, 0
-	HAZARD_CP0
-
-	mtc0	zero, CP0_TAGHI, 0
-	HAZARD_CP0
-
-	/* Cache size is 16384 = 512 lines x 32 bytes per line */
-	or       t2, zero, (128*4)-1  /* 512 lines  */
-	/* Invalidate all lines */
-2:
-	cache Index_Store_Tag_D, 0(t1)
-	addiu    t2, t2, -1
-	bne      t2, zero, 2b
-	addiu    t1, t1, 32        /* 32 bytes in a line */
-	.set pop
-	.endm
-
-	.macro	cachePr4450ICReset
-	.set	push
-	.set	noreorder
-
-	/* Save CP0 status reg on entry; */
-	/* disable interrupts during cache reset */
-	mfc0    t0, CP0_STATUS      /* T0 = interrupt status on entry */
-	HAZARD_CP0
-
-	mtc0    zero, CP0_STATUS   /* disable CPU interrupts */
-	HAZARD_CP0
-
-	or      t1, zero, zero              /* T1 = starting cache index (0) */
-	ori     t2, zero, (256 - 1) /* T2 = inst cache set cnt - 1 */
-
-	icache_invd_loop:
-	/* 9 == register t1 */
-	.word   CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
-		(0 * ICACHE_SET_SIZE)  /* invalidate inst cache WAY0 */
-	.word   CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
-		(1 * ICACHE_SET_SIZE)  /* invalidate inst cache WAY1 */
-
-	addiu   t1, t1, ICACHE_LINE_SIZE    /* T1 = next cache line index */
-	bne     t2, zero, icache_invd_loop /* T2 = 0 if all sets invalidated */
-	addiu   t2, t2, -1        /* decrement T2 set cnt (delay slot) */
-
-	/* Initialize the latches in the instruction cache tag */
-	/* that drive the way selection tri-state bus drivers, by doing a */
-	/* dummy load while the instruction cache is still disabled. */
-	/* TODO: Is this needed ? */
-	la      t1, KSEG0            /* T1 = cached memory base address */
-	lw      zero, 0x0000(t1)      /* (dummy read of first memory word) */
-
-	mtc0    t0, CP0_STATUS        /* restore interrupt status on entry */
-	HAZARD_CP0
-	.set	pop
-	.endm
-
-	.macro	cachePr4450DCReset
-	.set	push
-	.set	noreorder
-	mfc0    t0, CP0_STATUS           /* T0 = interrupt status on entry */
-	HAZARD_CP0
-	mtc0    zero, CP0_STATUS         /* disable CPU interrupts */
-	HAZARD_CP0
-
-	/* Writeback/invalidate entire data cache sets/ways/lines */
-	or      t1, zero, zero              /* T1 = starting cache index (0) */
-	ori     t2, zero, (DCACHE_SET_COUNT - 1) /* T2 = data cache set cnt - 1 */
-
-	dcache_wbinvd_loop:
-	/* 9 == register t1 */
-	.word   CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
-		(0 * DCACHE_SET_SIZE)  /* writeback/invalidate WAY0 */
-	.word   CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
-		(1 * DCACHE_SET_SIZE)  /* writeback/invalidate WAY1 */
-	.word   CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
-		(2 * DCACHE_SET_SIZE)  /* writeback/invalidate WAY2 */
-	.word   CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
-		(3 * DCACHE_SET_SIZE)  /* writeback/invalidate WAY3 */
-
-	addiu   t1, t1, DCACHE_LINE_SIZE  /* T1 = next data cache line index */
-	bne     t2, zero, dcache_wbinvd_loop /* T2 = 0 when wbinvd entire cache */
-	addiu   t2, t2, -1          /* decrement T2 set cnt (delay slot) */
-
-	/* Initialize the latches in the data cache tag that drive the way
-	selection tri-state bus drivers, by doing a dummy load while the
-	data cache is still in the disabled mode.  TODO: Is this needed ? */
-	la      t1, KSEG0            /* T1 = cached memory base address */
-	lw      zero, 0x0000(t1)      /* (dummy read of first memory word) */
-
-	mtc0    t0, CP0_STATUS       /* restore interrupt status on entry */
-	HAZARD_CP0
-	.set	pop
-	.endm
-
-#endif /* __ASM_MACH_KERNEL_ENTRY_INIT_H */
diff --git a/arch/mips/include/asm/mach-pnx8550/nand.h b/arch/mips/include/asm/mach-pnx8550/nand.h
deleted file mode 100644
index aefbc51..0000000
--- a/arch/mips/include/asm/mach-pnx8550/nand.h
+++ /dev/null
@@ -1,121 +0,0 @@
-#ifndef __PNX8550_NAND_H
-#define __PNX8550_NAND_H
-
-#define PNX8550_NAND_BASE_ADDR   0x10000000
-#define PNX8550_PCIXIO_BASE	 0xBBE40000
-
-#define PNX8550_DMA_EXT_ADDR     *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x800)
-#define PNX8550_DMA_INT_ADDR     *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x804)
-#define PNX8550_DMA_TRANS_SIZE   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x808)
-#define PNX8550_DMA_CTRL         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x80c)
-#define PNX8550_XIO_SEL0         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x814)
-#define PNX8550_GPXIO_ADDR       *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x820)
-#define PNX8550_GPXIO_WR         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x824)
-#define PNX8550_GPXIO_RD         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x828)
-#define PNX8550_GPXIO_CTRL       *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x82C)
-#define PNX8550_XIO_FLASH_CTRL   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x830)
-#define PNX8550_GPXIO_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb0)
-#define PNX8550_GPXIO_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb4)
-#define PNX8550_GPXIO_INT_CLEAR  *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb8)
-#define PNX8550_DMA_INT_STATUS   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd0)
-#define PNX8550_DMA_INT_ENABLE   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd4)
-#define PNX8550_DMA_INT_CLEAR    *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd8)
-
-#define PNX8550_XIO_SEL0_EN_16BIT    0x00800000
-#define PNX8550_XIO_SEL0_USE_ACK     0x00400000
-#define PNX8550_XIO_SEL0_REN_HIGH    0x00100000
-#define PNX8550_XIO_SEL0_REN_LOW     0x00040000
-#define PNX8550_XIO_SEL0_WEN_HIGH    0x00010000
-#define PNX8550_XIO_SEL0_WEN_LOW     0x00004000
-#define PNX8550_XIO_SEL0_WAIT        0x00000200
-#define PNX8550_XIO_SEL0_OFFSET      0x00000020
-#define PNX8550_XIO_SEL0_TYPE_68360  0x00000000
-#define PNX8550_XIO_SEL0_TYPE_NOR    0x00000008
-#define PNX8550_XIO_SEL0_TYPE_NAND   0x00000010
-#define PNX8550_XIO_SEL0_TYPE_IDE    0x00000018
-#define PNX8550_XIO_SEL0_SIZE_8MB    0x00000000
-#define PNX8550_XIO_SEL0_SIZE_16MB   0x00000002
-#define PNX8550_XIO_SEL0_SIZE_32MB   0x00000004
-#define PNX8550_XIO_SEL0_SIZE_64MB   0x00000006
-#define PNX8550_XIO_SEL0_ENAB        0x00000001
-
-#define PNX8550_SEL0_DEFAULT ((PNX8550_XIO_SEL0_EN_16BIT)  | \
-                              (PNX8550_XIO_SEL0_REN_HIGH*0)| \
-	                      (PNX8550_XIO_SEL0_REN_LOW*2) | \
-	                      (PNX8550_XIO_SEL0_WEN_HIGH*0)| \
-                              (PNX8550_XIO_SEL0_WEN_LOW*2) | \
-	                      (PNX8550_XIO_SEL0_WAIT*4)    | \
-			      (PNX8550_XIO_SEL0_OFFSET*0)  | \
-			      (PNX8550_XIO_SEL0_TYPE_NAND) | \
-			      (PNX8550_XIO_SEL0_SIZE_32MB) | \
-			      (PNX8550_XIO_SEL0_ENAB))
-
-#define PNX8550_GPXIO_PENDING        0x00000200
-#define PNX8550_GPXIO_DONE           0x00000100
-#define PNX8550_GPXIO_CLR_DONE       0x00000080
-#define PNX8550_GPXIO_INIT           0x00000040
-#define PNX8550_GPXIO_READ_CMD       0x00000010
-#define PNX8550_GPXIO_BEN            0x0000000F
-
-#define PNX8550_XIO_FLASH_64MB       0x00200000
-#define PNX8550_XIO_FLASH_INC_DATA   0x00100000
-#define PNX8550_XIO_FLASH_CMD_PH     0x000C0000
-#define PNX8550_XIO_FLASH_CMD_PH2    0x00080000
-#define PNX8550_XIO_FLASH_CMD_PH1    0x00040000
-#define PNX8550_XIO_FLASH_CMD_PH0    0x00000000
-#define PNX8550_XIO_FLASH_ADR_PH     0x00030000
-#define PNX8550_XIO_FLASH_ADR_PH3    0x00030000
-#define PNX8550_XIO_FLASH_ADR_PH2    0x00020000
-#define PNX8550_XIO_FLASH_ADR_PH1    0x00010000
-#define PNX8550_XIO_FLASH_ADR_PH0    0x00000000
-#define PNX8550_XIO_FLASH_CMD_B(x)   ((x<<8) & 0x0000FF00)
-#define PNX8550_XIO_FLASH_CMD_A(x)   (x & 0x000000FF)
-
-#define PNX8550_XIO_INT_ACK          0x00004000
-#define PNX8550_XIO_INT_COMPL        0x00002000
-#define PNX8550_XIO_INT_NONSUP       0x00000200
-#define PNX8550_XIO_INT_ABORT        0x00000004
-
-#define PNX8550_DMA_CTRL_SINGLE_DATA 0x00000400
-#define PNX8550_DMA_CTRL_SND2XIO     0x00000200
-#define PNX8550_DMA_CTRL_FIX_ADDR    0x00000100
-#define PNX8550_DMA_CTRL_BURST_8     0x00000000
-#define PNX8550_DMA_CTRL_BURST_16    0x00000020
-#define PNX8550_DMA_CTRL_BURST_32    0x00000040
-#define PNX8550_DMA_CTRL_BURST_64    0x00000060
-#define PNX8550_DMA_CTRL_BURST_128   0x00000080
-#define PNX8550_DMA_CTRL_BURST_256   0x000000A0
-#define PNX8550_DMA_CTRL_BURST_512   0x000000C0
-#define PNX8550_DMA_CTRL_BURST_NORES 0x000000E0
-#define PNX8550_DMA_CTRL_INIT_DMA    0x00000010
-#define PNX8550_DMA_CTRL_CMD_TYPE    0x0000000F
-
-/* see PCI system arch, page 100 for the full list: */
-#define PNX8550_DMA_CTRL_PCI_CMD_READ    0x00000006
-#define PNX8550_DMA_CTRL_PCI_CMD_WRITE   0x00000007
-
-#define PNX8550_DMA_INT_STAT_ACK_DONE	(1<<14)
-#define PNX8550_DMA_INT_STAT_DMA_DONE	(1<<12)
-#define PNX8550_DMA_INT_STAT_DMA_ERR	(1<<9)
-#define PNX8550_DMA_INT_STAT_PERR5	(1<<5)
-#define PNX8550_DMA_INT_STAT_PERR4	(1<<4)
-#define PNX8550_DMA_INT_STAT_M_ABORT	(1<<2)
-#define PNX8550_DMA_INT_STAT_T_ABORT	(1<<1)
-
-#define PNX8550_DMA_INT_EN_ACK_DONE	(1<<14)
-#define PNX8550_DMA_INT_EN_DMA_DONE	(1<<12)
-#define PNX8550_DMA_INT_EN_DMA_ERR	(1<<9)
-#define PNX8550_DMA_INT_EN_PERR5	(1<<5)
-#define PNX8550_DMA_INT_EN_PERR4	(1<<4)
-#define PNX8550_DMA_INT_EN_M_ABORT	(1<<2)
-#define PNX8550_DMA_INT_EN_T_ABORT	(1<<1)
-
-#define PNX8550_DMA_INT_CLR_ACK_DONE	(1<<14)
-#define PNX8550_DMA_INT_CLR_DMA_DONE	(1<<12)
-#define PNX8550_DMA_INT_CLR_DMA_ERR	(1<<9)
-#define PNX8550_DMA_INT_CLR_PERR5	(1<<5)
-#define PNX8550_DMA_INT_CLR_PERR4	(1<<4)
-#define PNX8550_DMA_INT_CLR_M_ABORT	(1<<2)
-#define PNX8550_DMA_INT_CLR_T_ABORT	(1<<1)
-
-#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/pci.h b/arch/mips/include/asm/mach-pnx8550/pci.h
deleted file mode 100644
index b921508..0000000
--- a/arch/mips/include/asm/mach-pnx8550/pci.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * PCI specific definitions
- *
- * Author: source@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-
-#ifndef __PNX8550_PCI_H
-#define __PNX8550_PCI_H
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#define PCI_ACCESS_READ  0
-#define PCI_ACCESS_WRITE 1
-
-#define PCI_CMD_IOR                     0x20
-#define PCI_CMD_IOW                     0x30
-#define PCI_CMD_CONFIG_READ             0xa0
-#define PCI_CMD_CONFIG_WRITE            0xb0
-
-#define PCI_IO_TIMEOUT                  1000
-#define PCI_IO_RETRY			5
-/* Timeout for IO and CFG accesses.
-   This is in 1/1024 th of a jiffie(=10ms)
-   i.e. approx 10us */
-#define PCI_IO_JIFFIES_TIMEOUT          40
-#define PCI_IO_JIFFIES_SHIFT            10
-
-#define PCI_BYTE_ENABLE_MASK		0x0000000f
-#define PCI_CFG_BUS_SHIFT               16
-#define PCI_CFG_FUNC_SHIFT              8
-#define PCI_CFG_REG_SHIFT               2
-
-#define PCI_BASE                  0x1be00000
-#define PCI_SETUP                 0x00040010
-#define PCI_DIS_REQGNT           (1<<30)
-#define PCI_DIS_REQGNTA          (1<<29)
-#define PCI_DIS_REQGNTB          (1<<28)
-#define PCI_D2_SUPPORT           (1<<27)
-#define PCI_D1_SUPPORT           (1<<26)
-#define PCI_EN_TA                (1<<24)
-#define PCI_EN_PCI2MMI           (1<<23)
-#define PCI_EN_XIO               (1<<22)
-#define PCI_BASE18_PREF          (1<<21)
-#define SIZE_16M                 0x3
-#define SIZE_32M                 0x4
-#define SIZE_64M                 0x5
-#define SIZE_128M                0x6
-#define PCI_SETUP_BASE18_SIZE(X) (X<<18)
-#define PCI_SETUP_BASE18_EN      (1<<17)
-#define PCI_SETUP_BASE14_PREF    (1<<16)
-#define PCI_SETUP_BASE14_SIZE(X) (X<<12)
-#define PCI_SETUP_BASE14_EN      (1<<11)
-#define PCI_SETUP_BASE10_PREF    (1<<10)
-#define PCI_SETUP_BASE10_SIZE(X) (X<<7)
-#define PCI_SETUP_CFGMANAGE_EN   (1<<1)
-#define PCI_SETUP_PCIARB_EN      (1<<0)
-
-#define PCI_CTRL                  0x040014
-#define PCI_SWPB_DCS_PCI         (1<<16)
-#define PCI_SWPB_PCI_PCI         (1<<15)
-#define PCI_SWPB_PCI_DCS         (1<<14)
-#define PCI_REG_WR_POST          (1<<13)
-#define PCI_XIO_WR_POST          (1<<12)
-#define PCI_PCI2_WR_POST         (1<<13)
-#define PCI_PCI1_WR_POST         (1<<12)
-#define PCI_SERR_SEEN            (1<<11)
-#define PCI_B10_SPEC_RD          (1<<6)
-#define PCI_B14_SPEC_RD          (1<<5)
-#define PCI_B18_SPEC_RD          (1<<4)
-#define PCI_B10_NOSUBWORD        (1<<3)
-#define PCI_B14_NOSUBWORD        (1<<2)
-#define PCI_B18_NOSUBWORD        (1<<1)
-#define PCI_RETRY_TMREN          (1<<0)
-
-#define PCI_BASE1_LO              0x040018
-#define PCI_BASE1_HI              0x04001C
-#define PCI_BASE2_LO              0x040020
-#define PCI_BASE2_HI              0x040024
-#define PCI_RDLIFETIM             0x040028
-#define PCI_GPPM_ADDR             0x04002C
-#define PCI_GPPM_WDAT             0x040030
-#define PCI_GPPM_RDAT             0x040034
-#define PCI_GPPM_CTRL             0x040038
-#define GPPM_DONE                (1<<10)
-#define INIT_PCI_CYCLE           (1<<9)
-#define GPPM_CMD(X)              (((X)&0xf)<<4)
-#define GPPM_BYTEEN(X)           ((X)&0xf)
-#define PCI_UNLOCKREG             0x04003C
-#define UNLOCK_SSID(X)           (((X)&0xff)<<8)
-#define UNLOCK_SETUP(X)          (((X)&0xff)<<0)
-#define UNLOCK_MAGIC             0xCA
-#define PCI_DEV_VEND_ID           0x040040
-#define DEVICE_ID(X)             (((X)>>16)&0xffff)
-#define VENDOR_ID(X)             (((X)&0xffff))
-#define PCI_CFG_CMDSTAT           0x040044
-#define PCI_CFG_STATUS(X)            (((X)>>16)&0xffff)
-#define PCI_CFG_COMMAND(X)           ((X)&0xffff)
-#define PCI_CLASS_REV             0x040048
-#define PCI_CLASSCODE(X)         (((X)>>8)&0xffffff)
-#define PCI_REVID(X)             ((X)&0xff)
-#define PCI_LAT_TMR     0x04004c
-#define PCI_BASE10      0x040050
-#define PCI_BASE14      0x040054
-#define PCI_BASE18      0x040058
-#define PCI_SUBSYS_ID   0x04006c
-#define PCI_CAP_PTR     0x040074
-#define PCI_CFG_MISC    0x04007c
-#define PCI_PMC         0x040080
-#define PCI_PWR_STATE   0x040084
-#define PCI_IO          0x040088
-#define PCI_SLVTUNING   0x04008C
-#define PCI_DMATUNING   0x040090
-#define PCI_DMAEADDR    0x040800
-#define PCI_DMAIADDR    0x040804
-#define PCI_DMALEN      0x040808
-#define PCI_DMACTRL     0x04080C
-#define PCI_XIOCTRL     0x040810
-#define PCI_SEL0PROF    0x040814
-#define PCI_SEL1PROF    0x040818
-#define PCI_SEL2PROF    0x04081C
-#define PCI_GPXIOADDR   0x040820
-#define PCI_NANDCTRLS   0x400830
-#define PCI_SEL3PROF    0x040834
-#define PCI_SEL4PROF    0x040838
-#define PCI_GPXIO_STAT  0x040FB0
-#define PCI_GPXIO_IMASK 0x040FB4
-#define PCI_GPXIO_ICLR  0x040FB8
-#define PCI_GPXIO_ISET  0x040FBC
-#define PCI_GPPM_STATUS 0x040FC0
-#define GPPM_DONE      (1<<10)
-#define GPPM_ERR       (1<<9)
-#define GPPM_MPAR_ERR  (1<<8)
-#define GPPM_PAR_ERR   (1<<7)
-#define GPPM_R_MABORT  (1<<2)
-#define GPPM_R_TABORT  (1<<1)
-#define PCI_GPPM_IMASK  0x040FC4
-#define PCI_GPPM_ICLR   0x040FC8
-#define PCI_GPPM_ISET   0x040FCC
-#define PCI_DMA_STATUS  0x040FD0
-#define PCI_DMA_IMASK   0x040FD4
-#define PCI_DMA_ICLR    0x040FD8
-#define PCI_DMA_ISET    0x040FDC
-#define PCI_ISTATUS     0x040FE0
-#define PCI_IMASK       0x040FE4
-#define PCI_ICLR        0x040FE8
-#define PCI_ISET        0x040FEC
-#define PCI_MOD_ID      0x040FFC
-
-/*
- *  PCI configuration cycle AD bus definition
- */
-/* Type 0 */
-#define PCI_CFG_TYPE0_REG_SHF           0
-#define PCI_CFG_TYPE0_FUNC_SHF          8
-
-/* Type 1 */
-#define PCI_CFG_TYPE1_REG_SHF           0
-#define PCI_CFG_TYPE1_FUNC_SHF          8
-#define PCI_CFG_TYPE1_DEV_SHF           11
-#define PCI_CFG_TYPE1_BUS_SHF           16
-
-/*
- *  Ethernet device DP83816 definition
- */
-#define DP83816_IRQ_ETHER               66
-
-#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/uart.h b/arch/mips/include/asm/mach-pnx8550/uart.h
deleted file mode 100644
index ad7608d..0000000
--- a/arch/mips/include/asm/mach-pnx8550/uart.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef __IP3106_UART_H
-#define __IP3106_UART_H
-
-#include <int.h>
-
-/* early macros for kgdb use. fixme: clean this up */
-
-#define UART_BASE		0xbbe4a000	/* PNX8550 */
-
-#define PNX8550_UART_PORT0	(UART_BASE)
-#define PNX8550_UART_PORT1	(UART_BASE + 0x1000)
-
-#define PNX8550_UART_INT(x)		(PNX8550_INT_GIC_MIN+19+x)
-#define IRQ_TO_UART(x)			(x-PNX8550_INT_GIC_MIN-19)
-
-/* early macros needed for prom/kgdb */
-
-#define ip3106_lcr(base, port)    *(volatile u32 *)(base+(port*0x1000) + 0x000)
-#define ip3106_mcr(base, port)   *(volatile u32 *)(base+(port*0x1000) + 0x004)
-#define ip3106_baud(base, port)  *(volatile u32 *)(base+(port*0x1000) + 0x008)
-#define ip3106_cfg(base, port)   *(volatile u32 *)(base+(port*0x1000) + 0x00C)
-#define ip3106_fifo(base, port)	 *(volatile u32 *)(base+(port*0x1000) + 0x028)
-#define ip3106_istat(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE0)
-#define ip3106_ien(base, port)   *(volatile u32 *)(base+(port*0x1000) + 0xFE4)
-#define ip3106_iclr(base, port)  *(volatile u32 *)(base+(port*0x1000) + 0xFE8)
-#define ip3106_iset(base, port)  *(volatile u32 *)(base+(port*0x1000) + 0xFEC)
-#define ip3106_pd(base, port)    *(volatile u32 *)(base+(port*0x1000) + 0xFF4)
-#define ip3106_mid(base, port)   *(volatile u32 *)(base+(port*0x1000) + 0xFFC)
-
-#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/usb.h b/arch/mips/include/asm/mach-pnx8550/usb.h
deleted file mode 100644
index 483b7fc..0000000
--- a/arch/mips/include/asm/mach-pnx8550/usb.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *  USB specific definitions
- *
- * Author: source@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-
-#ifndef __PNX8550_USB_H
-#define __PNX8550_USB_H
-
-/*
- * USB Host controller
- */
-
-#define PNX8550_USB_OHCI_OP_BASE	0x1be48000
-#define PNX8550_USB_OHCI_OP_LEN	        0x1000
-
-#endif
diff --git a/arch/mips/include/asm/mach-powertv/asic.h b/arch/mips/include/asm/mach-powertv/asic.h
index c7077a6..b341108 100644
--- a/arch/mips/include/asm/mach-powertv/asic.h
+++ b/arch/mips/include/asm/mach-powertv/asic.h
@@ -23,9 +23,9 @@
 #include <linux/platform_device.h>
 #include <asm/mach-powertv/asic_regs.h>
 
-#define DVR_CAPABLE     (1<<0)
-#define PCIE_CAPABLE    (1<<1)
-#define FFS_CAPABLE     (1<<2)
+#define DVR_CAPABLE	(1<<0)
+#define PCIE_CAPABLE	(1<<1)
+#define FFS_CAPABLE	(1<<2)
 #define DISPLAY_CAPABLE (1<<3)
 
 /* Platform Family types
@@ -111,7 +111,7 @@
 					 * Older drivers may report as
 					 * userReboot. */
 	sys_hardware_reset = 0x09,	/* HW watchdog or front-panel
-					 * reset button reset.  Older
+					 * reset button reset.	Older
 					 * drivers may report as
 					 * userReboot. */
 	sys_watchdogInterrupt = 0x0A	/* Pre-watchdog interrupt */
diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h
index deecb26..06712ab 100644
--- a/arch/mips/include/asm/mach-powertv/asic_regs.h
+++ b/arch/mips/include/asm/mach-powertv/asic_regs.h
@@ -49,8 +49,8 @@
 #define UART1_INTEN	uart1_inten
 #define UART1_CONFIG1	uart1_config1
 #define UART1_CONFIG2	uart1_config2
-#define UART1_DIVISORHI	uart1_divisorhi
-#define UART1_DIVISORLO	uart1_divisorlo
+#define UART1_DIVISORHI uart1_divisorhi
+#define UART1_DIVISORLO uart1_divisorlo
 #define UART1_DATA	uart1_data
 #define UART1_STATUS	uart1_status
 
diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h
index 3537164..f831672 100644
--- a/arch/mips/include/asm/mach-powertv/dma-coherence.h
+++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h
@@ -4,7 +4,7 @@
  * for more details.
  *
  * Version from mach-generic modified to support PowerTV port
- * Portions Copyright (C) 2009  Cisco Systems, Inc.
+ * Portions Copyright (C) 2009	Cisco Systems, Inc.
  * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
  *
  */
diff --git a/arch/mips/include/asm/mach-powertv/interrupts.h b/arch/mips/include/asm/mach-powertv/interrupts.h
index 4fd652c..6c463be 100644
--- a/arch/mips/include/asm/mach-powertv/interrupts.h
+++ b/arch/mips/include/asm/mach-powertv/interrupts.h
@@ -16,7 +16,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#ifndef	_ASM_MACH_POWERTV_INTERRUPTS_H_
+#ifndef _ASM_MACH_POWERTV_INTERRUPTS_H_
 #define _ASM_MACH_POWERTV_INTERRUPTS_H_
 
 /*
@@ -49,9 +49,9 @@
 						 * glue logic inside SPARC ILC
 						 * (see INT_SBAG_STAT, below,
 						 * for individual interrupts) */
-#define irq_qam_b_fec		(ibase+116)	/* QAM  B FEC Interrupt */
+#define irq_qam_b_fec		(ibase+116)	/* QAM	B FEC Interrupt */
 #define irq_qam_a_fec		(ibase+115)	/* QAM A FEC Interrupt */
-/* 114 unused 	(bit 18) */
+/* 114 unused	(bit 18) */
 #define irq_mailbox		(ibase+113)	/* Mailbox Debug Interrupt  --
 						 * Ored by glue logic inside
 						 * SPARC ILC (see
@@ -99,9 +99,9 @@
 #define irq_sata1		(ibase+87)	/* SATA 1 Interrupt */
 #define irq_dtcp		(ibase+86)	/* DTCP Interrupt */
 #define irq_pciexp1		(ibase+85)	/* PCI Express 1 Interrupt */
-/* 84 unused 	(bit 20) */
-/* 83 unused 	(bit 19) */
-/* 82 unused 	(bit 18) */
+/* 84 unused	(bit 20) */
+/* 83 unused	(bit 19) */
+/* 82 unused	(bit 18) */
 #define irq_sata2		(ibase+81)	/* SATA2 Interrupt */
 #define irq_uart2		(ibase+80)	/* UART2 Interrupt */
 #define irq_legacy_usb		(ibase+79)	/* Legacy USB Host ISR (1.1
@@ -117,22 +117,22 @@
 #define irq_mod_dma		(ibase+70)	/* Modulator DMA Interrupt */
 #define irq_byte_eng1		(ibase+69)	/* Byte Engine Interrupt [1] */
 #define irq_byte_eng0		(ibase+68)	/* Byte Engine Interrupt [0] */
-/* 67 unused 	(bit 03) */
-/* 66 unused 	(bit 02) */
-/* 65 unused 	(bit 01) */
-/* 64 unused 	(bit 00) */
+/* 67 unused	(bit 03) */
+/* 66 unused	(bit 02) */
+/* 65 unused	(bit 01) */
+/* 64 unused	(bit 00) */
 /*------------- Register: int_stat_1 */
-/* 63 unused 	(bit 31) */
-/* 62 unused 	(bit 30) */
-/* 61 unused 	(bit 29) */
-/* 60 unused 	(bit 28) */
-/* 59 unused 	(bit 27) */
-/* 58 unused 	(bit 26) */
-/* 57 unused 	(bit 25) */
-/* 56 unused 	(bit 24) */
+/* 63 unused	(bit 31) */
+/* 62 unused	(bit 30) */
+/* 61 unused	(bit 29) */
+/* 60 unused	(bit 28) */
+/* 59 unused	(bit 27) */
+/* 58 unused	(bit 26) */
+/* 57 unused	(bit 25) */
+/* 56 unused	(bit 24) */
 #define irq_buf_dma_mem2mem	(ibase+55)	/* BufDMA Memory to Memory
 						 * Interrupt */
-#define irq_buf_dma_usbtransmit	(ibase+54)	/* BufDMA USB Transmit
+#define irq_buf_dma_usbtransmit (ibase+54)	/* BufDMA USB Transmit
 						 * Interrupt */
 #define irq_buf_dma_qpskpodtransmit (ibase+53)	/* BufDMA QPSK/POD Tramsit
 						 * Interrupt */
@@ -140,7 +140,7 @@
 						 * Interrupt */
 #define irq_buf_dma_usbrecv	(ibase+51)	/* BufDMA USB Receive
 						 * Interrupt */
-#define irq_buf_dma_qpskpodrecv	(ibase+50)	/* BufDMA QPSK/POD Receive
+#define irq_buf_dma_qpskpodrecv (ibase+50)	/* BufDMA QPSK/POD Receive
 						 * Interrupt */
 #define irq_buf_dma_recv_error	(ibase+49)	/* BufDMA Receive Error
 						 * Interrupt */
@@ -166,7 +166,7 @@
 						 * Module */
 #define irq_gpio2		(ibase+37)	/* GP I/O IRQ 2 - From GP I/O
 						 * Module (ABE_intN) */
-#define irq_pcrcmplt1		(ibase+36)	/* PCR Capture Complete  or
+#define irq_pcrcmplt1		(ibase+36)	/* PCR Capture Complete	 or
 						 * Discontinuity 1 */
 #define irq_pcrcmplt2		(ibase+35)	/* PCR Capture Complete or
 						 * Discontinuity 2 */
@@ -217,18 +217,18 @@
 #define irq_qpsk_hecerr		(ibase+11)	/* QPSK HEC Error Interrupt */
 #define irq_qpsk_crcerr		(ibase+10)	/* QPSK AAL-5 CRC Error
 						 * Interrupt */
-/* 9 unused 	(bit 09) */
-/* 8 unused 	(bit 08) */
-#define irq_psicrcerr		(ibase+7) 	/* QAM PSI CRC Error
+/* 9 unused	(bit 09) */
+/* 8 unused	(bit 08) */
+#define irq_psicrcerr		(ibase+7)	/* QAM PSI CRC Error
 						 * Interrupt */
-#define irq_psilength_err	(ibase+6) 	/* QAM PSI Length Error
+#define irq_psilength_err	(ibase+6)	/* QAM PSI Length Error
 						 * Interrupt */
-#define irq_esfforward		(ibase+5) 	/* ESF Interrupt Mark From
+#define irq_esfforward		(ibase+5)	/* ESF Interrupt Mark From
 						 * Forward Path Reference -
 						 * every 3ms when forward Mbits
 						 * and forward slot control
 						 * bytes are updated. */
-#define irq_esfreverse		(ibase+4) 	/* ESF Interrupt Mark from
+#define irq_esfreverse		(ibase+4)	/* ESF Interrupt Mark from
 						 * Reverse Path Reference -
 						 * delayed from forward mark by
 						 * the ranging delay plus a
@@ -239,15 +239,15 @@
 						 * 1.554 M upstream rates and
 						 * every 6 ms for 256K upstream
 						 * rate. */
-#define irq_aloha_timeout	(ibase+3) 	/* Slotted-Aloha timeout on
+#define irq_aloha_timeout	(ibase+3)	/* Slotted-Aloha timeout on
 						 * Channel 1. */
-#define irq_reservation		(ibase+2) 	/* Partial (or Incremental)
+#define irq_reservation		(ibase+2)	/* Partial (or Incremental)
 						 * Reservation Message Completed
 						 * or Slotted aloha verify for
 						 * channel 1. */
-#define irq_aloha3		(ibase+1) 	/* Slotted-Aloha Message Verify
+#define irq_aloha3		(ibase+1)	/* Slotted-Aloha Message Verify
 						 * Interrupt or Reservation
 						 * increment completed for
 						 * channel 3. */
-#define irq_mpeg_d		(ibase+0) 	/* MPEG Decoder Interrupt */
+#define irq_mpeg_d		(ibase+0)	/* MPEG Decoder Interrupt */
 #endif	/* _ASM_MACH_POWERTV_INTERRUPTS_H_ */
diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
new file mode 100644
index 0000000..5a508f9
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
@@ -0,0 +1,39 @@
+/*
+ *  Ralink SoC register definitions
+ *
+ *  Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _RALINK_REGS_H_
+#define _RALINK_REGS_H_
+
+extern __iomem void *rt_sysc_membase;
+extern __iomem void *rt_memc_membase;
+
+static inline void rt_sysc_w32(u32 val, unsigned reg)
+{
+	__raw_writel(val, rt_sysc_membase + reg);
+}
+
+static inline u32 rt_sysc_r32(unsigned reg)
+{
+	return __raw_readl(rt_sysc_membase + reg);
+}
+
+static inline void rt_memc_w32(u32 val, unsigned reg)
+{
+	__raw_writel(val, rt_memc_membase + reg);
+}
+
+static inline u32 rt_memc_r32(unsigned reg)
+{
+	return __raw_readl(rt_memc_membase + reg);
+}
+
+#endif /* _RALINK_REGS_H_ */
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
new file mode 100644
index 0000000..7d344f2
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -0,0 +1,139 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _RT305X_REGS_H_
+#define _RT305X_REGS_H_
+
+enum rt305x_soc_type {
+	RT305X_SOC_UNKNOWN = 0,
+	RT305X_SOC_RT3050,
+	RT305X_SOC_RT3052,
+	RT305X_SOC_RT3350,
+	RT305X_SOC_RT3352,
+	RT305X_SOC_RT5350,
+};
+
+extern enum rt305x_soc_type rt305x_soc;
+
+static inline int soc_is_rt3050(void)
+{
+	return rt305x_soc == RT305X_SOC_RT3050;
+}
+
+static inline int soc_is_rt3052(void)
+{
+	return rt305x_soc == RT305X_SOC_RT3052;
+}
+
+static inline int soc_is_rt305x(void)
+{
+	return soc_is_rt3050() || soc_is_rt3052();
+}
+
+static inline int soc_is_rt3350(void)
+{
+	return rt305x_soc == RT305X_SOC_RT3350;
+}
+
+static inline int soc_is_rt3352(void)
+{
+	return rt305x_soc == RT305X_SOC_RT3352;
+}
+
+static inline int soc_is_rt5350(void)
+{
+	return rt305x_soc == RT305X_SOC_RT5350;
+}
+
+#define RT305X_SYSC_BASE		0x10000000
+
+#define SYSC_REG_CHIP_NAME0		0x00
+#define SYSC_REG_CHIP_NAME1		0x04
+#define SYSC_REG_CHIP_ID		0x0c
+#define SYSC_REG_SYSTEM_CONFIG		0x10
+
+#define RT3052_CHIP_NAME0		0x30335452
+#define RT3052_CHIP_NAME1		0x20203235
+
+#define RT3350_CHIP_NAME0		0x33335452
+#define RT3350_CHIP_NAME1		0x20203035
+
+#define RT3352_CHIP_NAME0		0x33335452
+#define RT3352_CHIP_NAME1		0x20203235
+
+#define RT5350_CHIP_NAME0		0x33355452
+#define RT5350_CHIP_NAME1		0x20203035
+
+#define CHIP_ID_ID_MASK			0xff
+#define CHIP_ID_ID_SHIFT		8
+#define CHIP_ID_REV_MASK		0xff
+
+#define RT305X_SYSCFG_CPUCLK_SHIFT		18
+#define RT305X_SYSCFG_CPUCLK_MASK		0x1
+#define RT305X_SYSCFG_CPUCLK_LOW		0x0
+#define RT305X_SYSCFG_CPUCLK_HIGH		0x1
+
+#define RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT	2
+#define RT305X_SYSCFG_CPUCLK_MASK		0x1
+#define RT305X_SYSCFG_SRAM_CS0_MODE_WDT		0x1
+
+#define RT3352_SYSCFG0_CPUCLK_SHIFT	8
+#define RT3352_SYSCFG0_CPUCLK_MASK	0x1
+#define RT3352_SYSCFG0_CPUCLK_LOW	0x0
+#define RT3352_SYSCFG0_CPUCLK_HIGH	0x1
+
+#define RT5350_SYSCFG0_CPUCLK_SHIFT	8
+#define RT5350_SYSCFG0_CPUCLK_MASK	0x3
+#define RT5350_SYSCFG0_CPUCLK_360	0x0
+#define RT5350_SYSCFG0_CPUCLK_320	0x2
+#define RT5350_SYSCFG0_CPUCLK_300	0x3
+
+/* multi function gpio pins */
+#define RT305X_GPIO_I2C_SD		1
+#define RT305X_GPIO_I2C_SCLK		2
+#define RT305X_GPIO_SPI_EN		3
+#define RT305X_GPIO_SPI_CLK		4
+/* GPIO 7-14 is shared between UART0, PCM  and I2S interfaces */
+#define RT305X_GPIO_7			7
+#define RT305X_GPIO_10			10
+#define RT305X_GPIO_14			14
+#define RT305X_GPIO_UART1_TXD		15
+#define RT305X_GPIO_UART1_RXD		16
+#define RT305X_GPIO_JTAG_TDO		17
+#define RT305X_GPIO_JTAG_TDI		18
+#define RT305X_GPIO_MDIO_MDC		22
+#define RT305X_GPIO_MDIO_MDIO		23
+#define RT305X_GPIO_SDRAM_MD16		24
+#define RT305X_GPIO_SDRAM_MD31		39
+#define RT305X_GPIO_GE0_TXD0		40
+#define RT305X_GPIO_GE0_RXCLK		51
+
+#define RT305X_GPIO_MODE_I2C		BIT(0)
+#define RT305X_GPIO_MODE_SPI		BIT(1)
+#define RT305X_GPIO_MODE_UART0_SHIFT	2
+#define RT305X_GPIO_MODE_UART0_MASK	0x7
+#define RT305X_GPIO_MODE_UART0(x)	((x) << RT305X_GPIO_MODE_UART0_SHIFT)
+#define RT305X_GPIO_MODE_UARTF		0x0
+#define RT305X_GPIO_MODE_PCM_UARTF	0x1
+#define RT305X_GPIO_MODE_PCM_I2S	0x2
+#define RT305X_GPIO_MODE_I2S_UARTF	0x3
+#define RT305X_GPIO_MODE_PCM_GPIO	0x4
+#define RT305X_GPIO_MODE_GPIO_UARTF	0x5
+#define RT305X_GPIO_MODE_GPIO_I2S	0x6
+#define RT305X_GPIO_MODE_GPIO		0x7
+#define RT305X_GPIO_MODE_UART1		BIT(5)
+#define RT305X_GPIO_MODE_JTAG		BIT(6)
+#define RT305X_GPIO_MODE_MDIO		BIT(7)
+#define RT305X_GPIO_MODE_SDRAM		BIT(8)
+#define RT305X_GPIO_MODE_RGMII		BIT(9)
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/war.h b/arch/mips/include/asm/mach-ralink/war.h
similarity index 83%
rename from arch/mips/include/asm/mach-pnx8550/war.h
rename to arch/mips/include/asm/mach-ralink/war.h
index de8894c..a7b712c 100644
--- a/arch/mips/include/asm/mach-pnx8550/war.h
+++ b/arch/mips/include/asm/mach-ralink/war.h
@@ -5,8 +5,8 @@
  *
  * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
  */
-#ifndef __ASM_MIPS_MACH_PNX8550_WAR_H
-#define __ASM_MIPS_MACH_PNX8550_WAR_H
+#ifndef __ASM_MACH_RALINK_WAR_H
+#define __ASM_MACH_RALINK_WAR_H
 
 #define R4600_V1_INDEX_ICACHEOP_WAR	0
 #define R4600_V1_HIT_CACHEOP_WAR	0
@@ -17,8 +17,9 @@
 #define MIPS4K_ICACHE_REFILL_WAR	0
 #define MIPS_CACHE_SYNC_WAR		0
 #define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
 #define ICACHE_REFILLS_WORKAROUND_WAR	0
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0
 
-#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */
+#endif /* __ASM_MACH_RALINK_WAR_H */
diff --git a/arch/mips/include/asm/mach-rc32434/ddr.h b/arch/mips/include/asm/mach-rc32434/ddr.h
index 291e2cf..e1cad0c 100644
--- a/arch/mips/include/asm/mach-rc32434/ddr.h
+++ b/arch/mips/include/asm/mach-rc32434/ddr.h
@@ -138,4 +138,4 @@
 #define RC32434_DLLED_DBE_BIT		0
 #define RC32434_DLLED_DTE_BIT		1
 
-#endif  /* _ASM_RC32434_DDR_H_ */
+#endif	/* _ASM_RC32434_DDR_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/dma.h b/arch/mips/include/asm/mach-rc32434/dma.h
index 5f898b5..4322191 100644
--- a/arch/mips/include/asm/mach-rc32434/dma.h
+++ b/arch/mips/include/asm/mach-rc32434/dma.h
@@ -5,7 +5,7 @@
  * DMA register definition.
  *
  * Author : ryan.holmQVist@idt.com
- * Date   : 20011005
+ * Date	  : 20011005
  */
 
 #ifndef __ASM_RC32434_DMA_H
@@ -71,10 +71,10 @@
 #define DMA_CHAN_DONE_BIT		(1 << 1)
 #define DMA_CHAN_MODE_BIT		(1 << 2)
 #define DMA_CHAN_MODE_MSK		0x0000000c
-#define  DMA_CHAN_MODE_AUTO		0
-#define  DMA_CHAN_MODE_BURST		1
-#define  DMA_CHAN_MODE_XFRT		2
-#define  DMA_CHAN_MODE_RSVD		3
+#define	 DMA_CHAN_MODE_AUTO		0
+#define	 DMA_CHAN_MODE_BURST		1
+#define	 DMA_CHAN_MODE_XFRT		2
+#define	 DMA_CHAN_MODE_RSVD		3
 #define DMA_CHAN_ACT_BIT		(1 << 4)
 
 /* DMA status registers */
@@ -100,4 +100,4 @@
 	struct dma_reg ch[DMA_CHAN_COUNT];
 };
 
-#endif  /* __ASM_RC32434_DMA_H */
+#endif	/* __ASM_RC32434_DMA_H */
diff --git a/arch/mips/include/asm/mach-rc32434/dma_v.h b/arch/mips/include/asm/mach-rc32434/dma_v.h
index 173a9f9..28c5406 100644
--- a/arch/mips/include/asm/mach-rc32434/dma_v.h
+++ b/arch/mips/include/asm/mach-rc32434/dma_v.h
@@ -5,7 +5,7 @@
  * DMA register definition.
  *
  * Author : ryan.holmQVist@idt.com
- * Date   : 20011005
+ * Date	  : 20011005
  */
 
 #ifndef _ASM_RC32434_DMA_V_H_
@@ -49,4 +49,4 @@
 	__raw_writel(dma_addr, &ch->dmandptr);
 }
 
-#endif  /* _ASM_RC32434_DMA_V_H_ */
+#endif	/* _ASM_RC32434_DMA_V_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/eth.h b/arch/mips/include/asm/mach-rc32434/eth.h
index a25cbc5..c2645fa 100644
--- a/arch/mips/include/asm/mach-rc32434/eth.h
+++ b/arch/mips/include/asm/mach-rc32434/eth.h
@@ -26,8 +26,8 @@
  *
  */
 
-#ifndef	__ASM_RC32434_ETH_H
-#define	__ASM_RC32434_ETH_H
+#ifndef __ASM_RC32434_ETH_H
+#define __ASM_RC32434_ETH_H
 
 
 #define ETH0_BASE_ADDR		0x18060000
@@ -217,4 +217,4 @@
 #define ETH_TX_LE		(1 << 16)
 #define ETH_TX_CC		0x001E0000
 
-#endif  /* __ASM_RC32434_ETH_H */
+#endif	/* __ASM_RC32434_ETH_H */
diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h
index 12ee8d5..4dee0a3 100644
--- a/arch/mips/include/asm/mach-rc32434/gpio.h
+++ b/arch/mips/include/asm/mach-rc32434/gpio.h
@@ -5,7 +5,7 @@
  * GPIO register definition.
  *
  * Author : ryan.holmQVist@idt.com
- * Date   : 20011005
+ * Date	  : 20011005
  * Copyright (C) 2001, 2002 Ryan Holm <ryan.holmQVist@idt.com>
  * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
  */
@@ -26,9 +26,9 @@
 #define irq_to_gpio(irq)	(irq - (8 + 4 * 32))
 
 struct rb532_gpio_reg {
-	u32   gpiofunc;   /* GPIO Function Register
+	u32   gpiofunc;	  /* GPIO Function Register
 			   * gpiofunc[x]==0 bit = gpio
-			   * func[x]==1  bit = altfunc
+			   * func[x]==1	 bit = altfunc
 			   */
 	u32   gpiocfg;	  /* GPIO Configuration Register
 			   * gpiocfg[x]==0 bit = input
diff --git a/arch/mips/include/asm/mach-rc32434/irq.h b/arch/mips/include/asm/mach-rc32434/irq.h
index 023a5b10..b76dec9 100644
--- a/arch/mips/include/asm/mach-rc32434/irq.h
+++ b/arch/mips/include/asm/mach-rc32434/irq.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_RC32434_IRQ_H
 #define __ASM_RC32434_IRQ_H
 
-#define NR_IRQS	256
+#define NR_IRQS 256
 
 #include <asm/mach-generic/irq.h>
 #include <asm/mach-rc32434/rb.h>
@@ -25,12 +25,12 @@
 
 #define UART0_IRQ		(GROUP3_IRQ_BASE + 0)
 
-#define ETH0_DMA_RX_IRQ   	(GROUP1_IRQ_BASE + 0)
-#define ETH0_DMA_TX_IRQ   	(GROUP1_IRQ_BASE + 1)
-#define ETH0_RX_OVR_IRQ   	(GROUP3_IRQ_BASE + 9)
-#define ETH0_TX_UND_IRQ   	(GROUP3_IRQ_BASE + 10)
+#define ETH0_DMA_RX_IRQ		(GROUP1_IRQ_BASE + 0)
+#define ETH0_DMA_TX_IRQ		(GROUP1_IRQ_BASE + 1)
+#define ETH0_RX_OVR_IRQ		(GROUP3_IRQ_BASE + 9)
+#define ETH0_TX_UND_IRQ		(GROUP3_IRQ_BASE + 10)
 
 #define GPIO_MAPPED_IRQ_BASE	GROUP4_IRQ_BASE
 #define GPIO_MAPPED_IRQ_GROUP	4
 
-#endif  /* __ASM_RC32434_IRQ_H */
+#endif	/* __ASM_RC32434_IRQ_H */
diff --git a/arch/mips/include/asm/mach-rc32434/pci.h b/arch/mips/include/asm/mach-rc32434/pci.h
index 410638f..6f40d15 100644
--- a/arch/mips/include/asm/mach-rc32434/pci.h
+++ b/arch/mips/include/asm/mach-rc32434/pci.h
@@ -151,11 +151,11 @@
 #define	 PCI_CFGA_REG_PBA2	(0x18 >> 2)	/* use PCIPBA_ */
 #define	 PCI_CFGA_REG_PBA3	(0x1c >> 2)	/* use PCIPBA_ */
 #define	 PCI_CFGA_REG_SUBSYS	(0x2c >> 2)	/* use PCFGSS_ */
-#define  PCI_CFGA_REG_3C	(0x3C >> 2)	/* use PCFG3C_ */
+#define	 PCI_CFGA_REG_3C	(0x3C >> 2)	/* use PCFG3C_ */
 #define	 PCI_CFGA_REG_PBBA0C	(0x44 >> 2)	/* use PCIPBAC_ */
-#define  PCI_CFGA_REG_PBA0M	(0x48 >> 2)
+#define	 PCI_CFGA_REG_PBA0M	(0x48 >> 2)
 #define	 PCI_CFGA_REG_PBA1C	(0x4c >> 2)	/* use PCIPBAC_ */
-#define  PCI_CFGA_REG_PBA1M	(0x50 >> 2)
+#define	 PCI_CFGA_REG_PBA1M	(0x50 >> 2)
 #define	 PCI_CFGA_REG_PBA2C	(0x54 >> 2)	/* use PCIPBAC_ */
 #define	 PCI_CFGA_REG_PBA2M	(0x58 >> 2)
 #define	 PCI_CFGA_REG_PBA3C	(0x5c >> 2)	/* use PCIPBAC_ */
@@ -164,9 +164,9 @@
 #define PCI_CFGA_FUNC_BIT	8
 #define PCI_CFGA_FUNC		0x00000700
 #define PCI_CFGA_DEV_BIT	11
-#define	PCI_CFGA_DEV		0x0000f800
-#define	PCI_CFGA_DEV_INTERN	0
-#define	PCI_CFGA_BUS_BIT	16
+#define PCI_CFGA_DEV		0x0000f800
+#define PCI_CFGA_DEV_INTERN	0
+#define PCI_CFGA_BUS_BIT	16
 #define PCI CFGA_BUS		0x00ff0000
 #define PCI_CFGA_BUS_TYPE0	0
 #define PCI_CFGA_EN		(1 << 31)
@@ -201,13 +201,13 @@
 #define PCI_PBAC_P		(1 << 1)
 #define PCI_PBAC_SIZE_BIT	2
 #define PCI_PBAC_SIZE		0x0000007c
-#define	PCI_PBAC_SB		(1 << 7)
-#define	PCI_PBAC_PP		(1 << 8)
+#define PCI_PBAC_SB		(1 << 7)
+#define PCI_PBAC_PP		(1 << 8)
 #define PCI_PBAC_MR_BIT		9
 #define PCI_PBAC_MR		0x00000600
 #define	 PCI_PBAC_MR_RD		0
 #define	 PCI_PBAC_MR_RD_LINE	1
-#define  PCI_PBAC_MR_RD_MULT	2
+#define	 PCI_PBAC_MR_RD_MULT	2
 #define PCI_PBAC_MRL		(1 << 11)
 #define PCI_PBAC_MRM		(1 << 12)
 #define PCI_PBAC_TRP		(1 << 13)
@@ -227,14 +227,14 @@
  */
 
 #define PCI_LBAC_MSI		(1 << 0)
-#define  PCI_LBAC_MSI_MEM	0
-#define  PCI_LBAC_MSI_IO	1
+#define	 PCI_LBAC_MSI_MEM	0
+#define	 PCI_LBAC_MSI_IO	1
 #define PCI_LBAC_SIZE_BIT	2
 #define PCI_LBAC_SIZE		0x0000007c
 #define PCI_LBAC_SB		(1 << 7)
 #define PCI_LBAC_RT		(1 << 8)
-#define  PCI_LBAC_RT_NO_PREF	0
-#define  PCI_LBAC_RT_PREF	1
+#define	 PCI_LBAC_RT_NO_PREF	0
+#define	 PCI_LBAC_RT_PREF	1
 
 /*
  * PCI Local Base Address [0|1|2|3] Mapping Register
@@ -279,16 +279,16 @@
 #define PCI_DMAD_PT		0x00c00000	/* preferred transaction field */
 /* These are for reads (DMA channel 8) */
 #define PCI_DMAD_DEVCMD_MR	0		/* memory read */
-#define	PCI_DMAD_DEVCMD_MRL	1		/* memory read line */
-#define	PCI_DMAD_DEVCMD_MRM	2		/* memory read multiple */
-#define	PCI_DMAD_DEVCMD_IOR	3		/* I/O read */
+#define PCI_DMAD_DEVCMD_MRL	1		/* memory read line */
+#define PCI_DMAD_DEVCMD_MRM	2		/* memory read multiple */
+#define PCI_DMAD_DEVCMD_IOR	3		/* I/O read */
 /* These are for writes (DMA channel 9) */
 #define PCI_DMAD_DEVCMD_MW	0		/* memory write */
-#define	PCI_DMAD_DEVCMD_MWI	1		/* memory write invalidate */
-#define	PCI_DMAD_DEVCMD_IOW	3		/* I/O write */
+#define PCI_DMAD_DEVCMD_MWI	1		/* memory write invalidate */
+#define PCI_DMAD_DEVCMD_IOW	3		/* I/O write */
 
 /* Swap byte field applies to both DMA channel 8 and 9 */
-#define	PCI_DMAD_SB		(1 << 24)	/* swap byte field */
+#define PCI_DMAD_SB		(1 << 24)	/* swap byte field */
 
 
 /*
@@ -309,7 +309,7 @@
 #define PCI_MSU_M1		(1 << 1)
 #define PCI_MSU_DB		(1 << 2)
 
-#define PCI_MSG_ADDR	     	0xB8088010
+#define PCI_MSG_ADDR		0xB8088010
 #define PCI0_ADDR		0xB8080000
 #define rc32434_pci ((struct pci_reg *) PCI0_ADDR)
 #define rc32434_pci_msg ((struct pci_msu *) PCI_MSG_ADDR)
@@ -331,9 +331,9 @@
 #define PCILBA_SIZE_MASK	0x1F
 #define SIZE_256MB		0x1C
 #define SIZE_128MB		0x1B
-#define SIZE_64MB               0x1A
+#define SIZE_64MB		0x1A
 #define SIZE_32MB		0x19
-#define SIZE_16MB               0x18
+#define SIZE_16MB		0x18
 #define SIZE_4MB		0x16
 #define SIZE_2MB		0x15
 #define SIZE_1MB		0x14
@@ -363,7 +363,7 @@
 #define KORINA_CONFIG23_ADDR	0x8000005C
 #define KORINA_CONFIG24_ADDR	0x80000060
 #define KORINA_CONFIG25_ADDR	0x80000064
-#define KORINA_CMD 		(PCI_CFG04_CMD_IO_ENA | \
+#define KORINA_CMD		(PCI_CFG04_CMD_IO_ENA | \
 				 PCI_CFG04_CMD_MEM_ENA | \
 				 PCI_CFG04_CMD_BM_ENA | \
 				 PCI_CFG04_CMD_MW_INV | \
@@ -401,8 +401,8 @@
 #define KORINA_BAR3	0x48000008	/* Spare 128 MB Memory */
 
 #define KORINA_CNFG4	KORINA_BAR0
-#define KORINA_CNFG5    KORINA_BAR1
-#define KORINA_CNFG6 	KORINA_BAR2
+#define KORINA_CNFG5	KORINA_BAR1
+#define KORINA_CNFG6	KORINA_BAR2
 #define KORINA_CNFG7	KORINA_BAR3
 
 #define KORINA_SUBSYS_VENDOR_ID 0x011d
@@ -410,20 +410,20 @@
 #define KORINA_CNFG8		0
 #define KORINA_CNFG9		0
 #define KORINA_CNFG10		0
-#define KORINA_CNFG11 	((KORINA_SUBSYS_VENDOR_ID<<16) | \
+#define KORINA_CNFG11	((KORINA_SUBSYS_VENDOR_ID<<16) | \
 			  KORINA_SUBSYSTEM_ID)
 #define KORINA_INT_LINE		1
 #define KORINA_INT_PIN		1
 #define KORINA_MIN_GNT		8
 #define KORINA_MAX_LAT		0x38
 #define KORINA_CNFG12		0
-#define KORINA_CNFG13 		0
+#define KORINA_CNFG13		0
 #define KORINA_CNFG14		0
 #define KORINA_CNFG15	((KORINA_MAX_LAT<<24) | \
 			 (KORINA_MIN_GNT<<16) | \
 			 (KORINA_INT_PIN<<8)  | \
 			  KORINA_INT_LINE)
-#define	KORINA_RETRY_LIMIT	0x80
+#define KORINA_RETRY_LIMIT	0x80
 #define KORINA_TRDY_LIMIT	0x80
 #define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \
 			KORINA_TRDY_LIMIT)
@@ -475,7 +475,7 @@
 #define KORINA_PBA3M	0
 #define KORINA_CNFG24	KORINA_PBA3M
 
-#define	PCITC_DTIMER_VAL	8
+#define PCITC_DTIMER_VAL	8
 #define PCITC_RTIMER_VAL	0x10
 
-#endif  /* __ASM_RC32434_PCI_H */
+#endif	/* __ASM_RC32434_PCI_H */
diff --git a/arch/mips/include/asm/mach-rc32434/rb.h b/arch/mips/include/asm/mach-rc32434/rb.h
index 6dc5f8d..aac8ce8 100644
--- a/arch/mips/include/asm/mach-rc32434/rb.h
+++ b/arch/mips/include/asm/mach-rc32434/rb.h
@@ -18,7 +18,7 @@
 #include <linux/genhd.h>
 
 #define REGBASE		0x18000000
-#define IDT434_REG_BASE	((volatile void *) KSEG1ADDR(REGBASE))
+#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(REGBASE))
 #define UART0BASE	0x58000
 #define RST		(1 << 15)
 #define DEV0BASE	0x010000
@@ -80,10 +80,10 @@
 struct mpmc_device {
 	unsigned char	state;
 	spinlock_t	lock;
-	void __iomem 	*base;
+	void __iomem	*base;
 };
 
 extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
 extern unsigned char get_latch_u5(void);
 
-#endif  /* __ASM_RC32434_RB_H */
+#endif	/* __ASM_RC32434_RB_H */
diff --git a/arch/mips/include/asm/mach-rc32434/rc32434.h b/arch/mips/include/asm/mach-rc32434/rc32434.h
index fce25d4..02fd32b4 100644
--- a/arch/mips/include/asm/mach-rc32434/rc32434.h
+++ b/arch/mips/include/asm/mach-rc32434/rc32434.h
@@ -16,4 +16,4 @@
 	__asm__ volatile ("sync");
 }
 
-#endif  /* _ASM_RC32434_RC32434_H_ */
+#endif	/* _ASM_RC32434_RC32434_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/timer.h b/arch/mips/include/asm/mach-rc32434/timer.h
index e49b1d5..cda26bb9 100644
--- a/arch/mips/include/asm/mach-rc32434/timer.h
+++ b/arch/mips/include/asm/mach-rc32434/timer.h
@@ -51,15 +51,15 @@
 #define RC32434_CTC_TO_BIT		1
 
 /* Real time clock registers */
-#define RC32434_RTC_MSK(x)              BIT_TO_MASK(x)
-#define RC32434_RTC_CE_BIT              0
-#define RC32434_RTC_TO_BIT              1
-#define RC32434_RTC_RQE_BIT             2
+#define RC32434_RTC_MSK(x)		BIT_TO_MASK(x)
+#define RC32434_RTC_CE_BIT		0
+#define RC32434_RTC_TO_BIT		1
+#define RC32434_RTC_RQE_BIT		2
 
 /* Counter registers */
-#define RC32434_RCOUNT_BIT              0
-#define RC32434_RCOUNT_MSK              0x0000ffff
-#define RC32434_RCOMP_BIT               0
-#define RC32434_RCOMP_MSK               0x0000ffff
+#define RC32434_RCOUNT_BIT		0
+#define RC32434_RCOUNT_MSK		0x0000ffff
+#define RC32434_RCOMP_BIT		0
+#define RC32434_RCOMP_MSK		0x0000ffff
 
-#endif  /* __ASM_RC32434_TIMER_H */
+#endif	/* __ASM_RC32434_TIMER_H */
diff --git a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
index 7f3e3f9..d9c8284 100644
--- a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
@@ -23,8 +23,8 @@
 /* #define cpu_has_watch	? */
 #define cpu_has_divec		1
 #define cpu_has_vce		0
-/* #define cpu_has_cache_cdex_p	? */
-/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
 /* #define cpu_has_prefetch	? */
 #define cpu_has_mcheck		1
 /* #define cpu_has_ejtag	? */
@@ -53,8 +53,8 @@
 /* #define cpu_has_watch	? */
 #define cpu_has_divec		1
 #define cpu_has_vce		0
-/* #define cpu_has_cache_cdex_p	? */
-/* #define cpu_has_cache_cdex_s	? */
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
 /* #define cpu_has_prefetch	? */
 #define cpu_has_mcheck		1
 /* #define cpu_has_ejtag	? */
diff --git a/arch/mips/include/asm/mach-sead3/irq.h b/arch/mips/include/asm/mach-sead3/irq.h
index 652ea4c..5d154cf 100644
--- a/arch/mips/include/asm/mach-sead3/irq.h
+++ b/arch/mips/include/asm/mach-sead3/irq.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MACH_MIPS_IRQ_H
 #define __ASM_MACH_MIPS_IRQ_H
 
-#define NR_IRQS	256
+#define NR_IRQS 256
 
 
 #include_next <irq.h>
diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h
index 176f5b3..0a227d4 100644
--- a/arch/mips/include/asm/mach-sibyte/war.h
+++ b/arch/mips/include/asm/mach-sibyte/war.h
@@ -21,12 +21,12 @@
 #endif
 
 #define BCM1250_M3_WAR	sb1250_m3_workaround_needed()
-#define SIBYTE_1956_WAR	1
+#define SIBYTE_1956_WAR 1
 
 #else
 
 #define BCM1250_M3_WAR	0
-#define SIBYTE_1956_WAR	0
+#define SIBYTE_1956_WAR 0
 
 #endif
 
diff --git a/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h
index 83746b8..00fa368 100644
--- a/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h
+++ b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h
@@ -1,6 +1,6 @@
 /*
  * This is a direct copy of the ev96100.h file, with a global
- * search and replace.  The numbers are the same.
+ * search and replace.	The numbers are the same.
  *
  * The reason I'm duplicating this is so that the 64120/96100
  * defines won't be confusing in the source code.
@@ -11,11 +11,11 @@
 /*
  * This is the CPU physical memory map of PPMC Board:
  *
- *    0x00000000-0x03FFFFFF      - 64MB SDRAM (SCS[0]#)
- *    0x1C000000-0x1C000000      - LED (CS0)
- *    0x1C800000-0x1C800007      - UART 16550 port (CS1)
- *    0x1F000000-0x1F000000      - MailBox (CS3)
- *    0x1FC00000-0x20000000      - 4MB Flash (BOOT CS)
+ *    0x00000000-0x03FFFFFF	 - 64MB SDRAM (SCS[0]#)
+ *    0x1C000000-0x1C000000	 - LED (CS0)
+ *    0x1C800000-0x1C800007	 - UART 16550 port (CS1)
+ *    0x1F000000-0x1F000000	 - MailBox (CS3)
+ *    0x1FC00000-0x20000000	 - 4MB Flash (BOOT CS)
  */
 
 #define WRPPMC_SDRAM_SCS0_BASE	0x00000000
@@ -39,8 +39,8 @@
  *
  * NOTE: We only have PCI_0 hose interface
  */
-#define GT_PCI_MEM_BASE	0x13000000UL
-#define GT_PCI_MEM_SIZE	0x02000000UL
+#define GT_PCI_MEM_BASE 0x13000000UL
+#define GT_PCI_MEM_SIZE 0x02000000UL
 #define GT_PCI_IO_BASE	0x11000000UL
 #define GT_PCI_IO_SIZE	0x02000000UL
 
diff --git a/arch/mips/include/asm/mc146818-time.h b/arch/mips/include/asm/mc146818-time.h
index 4a08dbe..9e1ad26 100644
--- a/arch/mips/include/asm/mc146818-time.h
+++ b/arch/mips/include/asm/mc146818-time.h
@@ -26,7 +26,7 @@
  * MC146818A or Dallas DS12887 data sheet for details.
  *
  * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you'll only notice that after reboot!
+ *	sets the minutes. Usually you'll only notice that after reboot!
  */
 static inline int mc146818_set_rtc_mmss(unsigned long nowtime)
 {
@@ -77,7 +77,7 @@
 	 * battery and quartz) will not reset the oscillator and will not
 	 * update precisely 500 ms later. You won't find this mentioned in
 	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...                           -- Markus Kuhn
+	 * sheets anyway ...			       -- Markus Kuhn
 	 */
 	CMOS_WRITE(save_control, RTC_CONTROL);
 	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h
index d14e2ad..b2048d1 100644
--- a/arch/mips/include/asm/mips-boards/bonito64.h
+++ b/arch/mips/include/asm/mips-boards/bonito64.h
@@ -41,18 +41,18 @@
 
 #define BONITO_BOOT_BASE		0x1fc00000
 #define BONITO_BOOT_SIZE		0x00100000
-#define BONITO_BOOT_TOP 		(BONITO_BOOT_BASE+BONITO_BOOT_SIZE-1)
+#define BONITO_BOOT_TOP			(BONITO_BOOT_BASE+BONITO_BOOT_SIZE-1)
 #define BONITO_FLASH_BASE		0x1c000000
 #define BONITO_FLASH_SIZE		0x03000000
 #define BONITO_FLASH_TOP		(BONITO_FLASH_BASE+BONITO_FLASH_SIZE-1)
 #define BONITO_SOCKET_BASE		0x1f800000
 #define BONITO_SOCKET_SIZE		0x00400000
 #define BONITO_SOCKET_TOP		(BONITO_SOCKET_BASE+BONITO_SOCKET_SIZE-1)
-#define BONITO_REG_BASE 		0x1fe00000
-#define BONITO_REG_SIZE 		0x00040000
+#define BONITO_REG_BASE			0x1fe00000
+#define BONITO_REG_SIZE			0x00040000
 #define BONITO_REG_TOP			(BONITO_REG_BASE+BONITO_REG_SIZE-1)
-#define BONITO_DEV_BASE 		0x1ff00000
-#define BONITO_DEV_SIZE 		0x00100000
+#define BONITO_DEV_BASE			0x1ff00000
+#define BONITO_DEV_SIZE			0x00100000
 #define BONITO_DEV_TOP			(BONITO_DEV_BASE+BONITO_DEV_SIZE-1)
 #define BONITO_PCILO_BASE		0x10000000
 #define BONITO_PCILO_SIZE		0x0c000000
@@ -79,14 +79,14 @@
 
 /* PCI Configuration  Registers */
 
-#define BONITO_PCI_REG(x)               BONITO(BONITO_PCICONFIGBASE + (x))
+#define BONITO_PCI_REG(x)		BONITO(BONITO_PCICONFIGBASE + (x))
 #define BONITO_PCIDID			BONITO_PCI_REG(0x00)
 #define BONITO_PCICMD			BONITO_PCI_REG(0x04)
-#define BONITO_PCICLASS 		BONITO_PCI_REG(0x08)
+#define BONITO_PCICLASS			BONITO_PCI_REG(0x08)
 #define BONITO_PCILTIMER		BONITO_PCI_REG(0x0c)
-#define BONITO_PCIBASE0 		BONITO_PCI_REG(0x10)
-#define BONITO_PCIBASE1 		BONITO_PCI_REG(0x14)
-#define BONITO_PCIBASE2 		BONITO_PCI_REG(0x18)
+#define BONITO_PCIBASE0			BONITO_PCI_REG(0x10)
+#define BONITO_PCIBASE1			BONITO_PCI_REG(0x14)
+#define BONITO_PCIBASE2			BONITO_PCI_REG(0x18)
 #define BONITO_PCIEXPRBASE		BONITO_PCI_REG(0x30)
 #define BONITO_PCIINT			BONITO_PCI_REG(0x3c)
 
@@ -95,7 +95,7 @@
 #define BONITO_PCICMD_MABORT_CLR	0x20000000
 #define BONITO_PCICMD_MTABORT_CLR	0x10000000
 #define BONITO_PCICMD_TABORT_CLR	0x08000000
-#define BONITO_PCICMD_MPERR_CLR 	0x01000000
+#define BONITO_PCICMD_MPERR_CLR		0x01000000
 #define BONITO_PCICMD_PERRRESPEN	0x00000040
 #define BONITO_PCICMD_ASTEPEN		0x00000080
 #define BONITO_PCICMD_SERREN		0x00000100
@@ -139,7 +139,7 @@
 
 /* Other Bonito configuration */
 
-#define BONITO_BONGENCFG_OFFSET         0x4
+#define BONITO_BONGENCFG_OFFSET		0x4
 #define BONITO_BONGENCFG		BONITO(BONITO_REGBASE + BONITO_BONGENCFG_OFFSET)
 
 #define BONITO_BONGENCFG_DEBUGMODE	0x00000001
@@ -165,7 +165,7 @@
 
 /* 2. IO & IDE configuration */
 
-#define BONITO_IODEVCFG 		BONITO(BONITO_REGBASE + 0x08)
+#define BONITO_IODEVCFG			BONITO(BONITO_REGBASE + 0x08)
 
 /* 3. IO & IDE configuration */
 
@@ -181,33 +181,33 @@
 
 /* GPIO Regs - r/w */
 
-#define BONITO_GPIODATA_OFFSET          0x1c
-#define BONITO_GPIODATA 		BONITO(BONITO_REGBASE + BONITO_GPIODATA_OFFSET)
+#define BONITO_GPIODATA_OFFSET		0x1c
+#define BONITO_GPIODATA			BONITO(BONITO_REGBASE + BONITO_GPIODATA_OFFSET)
 #define BONITO_GPIOIE			BONITO(BONITO_REGBASE + 0x20)
 
 /* ICU Configuration Regs - r/w */
 
 #define BONITO_INTEDGE			BONITO(BONITO_REGBASE + 0x24)
-#define BONITO_INTSTEER 		BONITO(BONITO_REGBASE + 0x28)
+#define BONITO_INTSTEER			BONITO(BONITO_REGBASE + 0x28)
 #define BONITO_INTPOL			BONITO(BONITO_REGBASE + 0x2c)
 
 /* ICU Enable Regs - IntEn & IntISR are r/o. */
 
-#define BONITO_INTENSET 		BONITO(BONITO_REGBASE + 0x30)
-#define BONITO_INTENCLR 		BONITO(BONITO_REGBASE + 0x34)
+#define BONITO_INTENSET			BONITO(BONITO_REGBASE + 0x30)
+#define BONITO_INTENCLR			BONITO(BONITO_REGBASE + 0x34)
 #define BONITO_INTEN			BONITO(BONITO_REGBASE + 0x38)
 #define BONITO_INTISR			BONITO(BONITO_REGBASE + 0x3c)
 
 /* PCI mail boxes */
 
-#define BONITO_PCIMAIL0_OFFSET          0x40
-#define BONITO_PCIMAIL1_OFFSET          0x44
-#define BONITO_PCIMAIL2_OFFSET          0x48
-#define BONITO_PCIMAIL3_OFFSET          0x4c
-#define BONITO_PCIMAIL0 		BONITO(BONITO_REGBASE + 0x40)
-#define BONITO_PCIMAIL1 		BONITO(BONITO_REGBASE + 0x44)
-#define BONITO_PCIMAIL2 		BONITO(BONITO_REGBASE + 0x48)
-#define BONITO_PCIMAIL3 		BONITO(BONITO_REGBASE + 0x4c)
+#define BONITO_PCIMAIL0_OFFSET		0x40
+#define BONITO_PCIMAIL1_OFFSET		0x44
+#define BONITO_PCIMAIL2_OFFSET		0x48
+#define BONITO_PCIMAIL3_OFFSET		0x4c
+#define BONITO_PCIMAIL0			BONITO(BONITO_REGBASE + 0x40)
+#define BONITO_PCIMAIL1			BONITO(BONITO_REGBASE + 0x44)
+#define BONITO_PCIMAIL2			BONITO(BONITO_REGBASE + 0x48)
+#define BONITO_PCIMAIL3			BONITO(BONITO_REGBASE + 0x4c)
 
 
 /* 6. PCI cache */
@@ -216,7 +216,7 @@
 #define BONITO_PCICACHETAG		BONITO(BONITO_REGBASE + 0x54)
 
 #define BONITO_PCIBADADDR		BONITO(BONITO_REGBASE + 0x58)
-#define BONITO_PCIMSTAT 		BONITO(BONITO_REGBASE + 0x5c)
+#define BONITO_PCIMSTAT			BONITO(BONITO_REGBASE + 0x5c)
 
 
 /*
@@ -228,20 +228,20 @@
 
 #define BONITO_CONFIGBASE		0x000
 #define BONITO_BONITOBASE		0x100
-#define BONITO_LDMABASE 		0x200
+#define BONITO_LDMABASE			0x200
 #define BONITO_COPBASE			0x300
 #define BONITO_REG_BLOCKMASK		0x300
 
-#define BONITO_LDMACTRL 		BONITO(BONITO_LDMABASE + 0x0)
-#define BONITO_LDMASTAT 		BONITO(BONITO_LDMABASE + 0x0)
-#define BONITO_LDMAADDR 		BONITO(BONITO_LDMABASE + 0x4)
+#define BONITO_LDMACTRL			BONITO(BONITO_LDMABASE + 0x0)
+#define BONITO_LDMASTAT			BONITO(BONITO_LDMABASE + 0x0)
+#define BONITO_LDMAADDR			BONITO(BONITO_LDMABASE + 0x4)
 #define BONITO_LDMAGO			BONITO(BONITO_LDMABASE + 0x8)
-#define BONITO_LDMADATA 		BONITO(BONITO_LDMABASE + 0xc)
+#define BONITO_LDMADATA			BONITO(BONITO_LDMABASE + 0xc)
 
 #define BONITO_COPCTRL			BONITO(BONITO_COPBASE + 0x0)
 #define BONITO_COPSTAT			BONITO(BONITO_COPBASE + 0x0)
-#define BONITO_COPPADDR 		BONITO(BONITO_COPBASE + 0x4)
-#define BONITO_COPDADDR 		BONITO(BONITO_COPBASE + 0x8)
+#define BONITO_COPPADDR			BONITO(BONITO_COPBASE + 0x4)
+#define BONITO_COPDADDR			BONITO(BONITO_COPBASE + 0x8)
 #define BONITO_COPGO			BONITO(BONITO_COPBASE + 0xc)
 
 
@@ -257,7 +257,7 @@
 #define BONITO_IDECOPGO_DMA_SIZE_SHIFT	0
 #define BONITO_IDECOPGO_DMA_WRITE	0x00010000
 #define BONITO_IDECOPGO_DMAWCOUNT	0x000f0000
-#define BONITO_IDECOPGO_DMAWCOUNT_SHIFT	16
+#define BONITO_IDECOPGO_DMAWCOUNT_SHIFT 16
 
 #define BONITO_IDECOPCTRL_DMA_STARTBIT	0x80000000
 #define BONITO_IDECOPCTRL_DMA_RSTBIT	0x40000000
@@ -291,11 +291,11 @@
 #define BONITO_SDCFG_DRAMMODESET	0x00200000
 /* --- */
 #define BONITO_SDCFG_DRAMEXTREGS	0x00400000
-#define BONITO_SDCFG_DRAMPARITY 	0x00800000
+#define BONITO_SDCFG_DRAMPARITY		0x00800000
 /* Added by RPF 11-9-00 */
-#define BONITO_SDCFG_DRAMBURSTLEN 	0x03000000
-#define BONITO_SDCFG_DRAMBURSTLEN_SHIFT	24
-#define BONITO_SDCFG_DRAMMODESET_DONE 	0x80000000
+#define BONITO_SDCFG_DRAMBURSTLEN	0x03000000
+#define BONITO_SDCFG_DRAMBURSTLEN_SHIFT 24
+#define BONITO_SDCFG_DRAMMODESET_DONE	0x80000000
 /* --- */
 
 /* PCI Cache - pciCacheCtrl */
@@ -308,7 +308,7 @@
 
 #define BONITO_PCICACHECTRL_IOBCCOH_PRES	0x00000100
 #define BONITO_PCICACHECTRL_IOBCCOH_EN	0x00000200
-#define BONITO_PCICACHECTRL_CPUCOH_PRES	0x00000400
+#define BONITO_PCICACHECTRL_CPUCOH_PRES 0x00000400
 #define BONITO_PCICACHECTRL_CPUCOH_EN	0x00000800
 
 #define BONITO_IODEVCFG_BUFFBIT_CS0	0x00000001
@@ -343,18 +343,18 @@
 
 /* gpio */
 #define BONITO_GPIO_GPIOW		0x000003ff
-#define BONITO_GPIO_GPIOW_SHIFT 	0
+#define BONITO_GPIO_GPIOW_SHIFT		0
 #define BONITO_GPIO_GPIOR		0x01ff0000
-#define BONITO_GPIO_GPIOR_SHIFT 	16
+#define BONITO_GPIO_GPIOR_SHIFT		16
 #define BONITO_GPIO_GPINR		0xfe000000
-#define BONITO_GPIO_GPINR_SHIFT 	25
+#define BONITO_GPIO_GPINR_SHIFT		25
 #define BONITO_GPIO_IOW(N)		(1<<(BONITO_GPIO_GPIOW_SHIFT+(N)))
 #define BONITO_GPIO_IOR(N)		(1<<(BONITO_GPIO_GPIOR_SHIFT+(N)))
 #define BONITO_GPIO_INR(N)		(1<<(BONITO_GPIO_GPINR_SHIFT+(N)))
 
 /* ICU */
 #define BONITO_ICU_MBOXES		0x0000000f
-#define BONITO_ICU_MBOXES_SHIFT 	0
+#define BONITO_ICU_MBOXES_SHIFT		0
 #define BONITO_ICU_DMARDY		0x00000010
 #define BONITO_ICU_DMAEMPTY		0x00000020
 #define BONITO_ICU_COPYRDY		0x00000040
@@ -384,13 +384,13 @@
 #define BONITO_PCIMAP_PCIMAP_2		0x00040000
 #define BONITO_PCIMAP_WIN(WIN, ADDR)	((((ADDR)>>26) & BONITO_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
 
-#define BONITO_PCIMAP_WINSIZE           (1<<26)
+#define BONITO_PCIMAP_WINSIZE		(1<<26)
 #define BONITO_PCIMAP_WINOFFSET(ADDR)	((ADDR) & (BONITO_PCIMAP_WINSIZE - 1))
 #define BONITO_PCIMAP_WINBASE(ADDR)	((ADDR) << 26)
 
 /* pcimembaseCfg */
 
-#define BONITO_PCIMEMBASECFG_MASK               0xf0000000
+#define BONITO_PCIMEMBASECFG_MASK		0xf0000000
 #define BONITO_PCIMEMBASECFG_MEMBASE0_MASK	0x0000001f
 #define BONITO_PCIMEMBASECFG_MEMBASE0_MASK_SHIFT	0
 #define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS	0x000003e0
@@ -406,21 +406,21 @@
 #define BONITO_PCIMEMBASECFG_MEMBASE1_IO	0x00800000
 
 #define BONITO_PCIMEMBASECFG_ASHIFT	23
-#define BONITO_PCIMEMBASECFG_AMASK              0x007fffff
+#define BONITO_PCIMEMBASECFG_AMASK		0x007fffff
 #define BONITO_PCIMEMBASECFGSIZE(WIN, SIZE)	(((~((SIZE)-1))>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)
 #define BONITO_PCIMEMBASECFGBASE(WIN, BASE)	(((BASE)>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS)
 
 #define BONITO_PCIMEMBASECFG_SIZE(WIN, CFG)  (((((~(CFG)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)) << (BONITO_PCIMEMBASECFG_ASHIFT - BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) | BONITO_PCIMEMBASECFG_AMASK)
 
 
-#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)  ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
-#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)  ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)	 ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)	 ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
 #define BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
 
-#define BONITO_PCITOPHYS(WIN, ADDR, CFG)          ( \
-                                                  (((ADDR) & (~(BONITO_PCIMEMBASECFG_MASK))) & (~(BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)))) | \
-                                                  (BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG)) \
-                                                )
+#define BONITO_PCITOPHYS(WIN, ADDR, CFG)	  ( \
+						  (((ADDR) & (~(BONITO_PCIMEMBASECFG_MASK))) & (~(BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)))) | \
+						  (BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG)) \
+						)
 
 /* PCICmd */
 
diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h
index 6e23ceb..44a09a6 100644
--- a/arch/mips/include/asm/mips-boards/generic.h
+++ b/arch/mips/include/asm/mips-boards/generic.h
@@ -1,21 +1,14 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
  * Defines of the MIPS boards specific address-MAP, registers, etc.
+ *
+ * Copyright (C) 2000,2012 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ *          Steven J. Hill <sjhill@mips.com>
  */
 #ifndef __ASM_MIPS_BOARDS_GENERIC_H
 #define __ASM_MIPS_BOARDS_GENERIC_H
@@ -27,39 +20,32 @@
 /*
  * Display register base.
  */
-#define ASCII_DISPLAY_WORD_BASE    0x1f000410
-#define ASCII_DISPLAY_POS_BASE     0x1f000418
-
-
-/*
- * Yamon Prom print address.
- */
-#define YAMON_PROM_PRINT_ADDR      0x1fc00504
-
+#define ASCII_DISPLAY_WORD_BASE	   0x1f000410
+#define ASCII_DISPLAY_POS_BASE	   0x1f000418
 
 /*
  * Reset register.
  */
-#define SOFTRES_REG       0x1f000500
-#define GORESET           0x42
+#define SOFTRES_REG	  0x1f000500
+#define GORESET		  0x42
 
 /*
  * Revision register.
  */
-#define MIPS_REVISION_REG                  0x1fc00010
-#define MIPS_REVISION_CORID_QED_RM5261     0
-#define MIPS_REVISION_CORID_CORE_LV        1
-#define MIPS_REVISION_CORID_BONITO64       2
-#define MIPS_REVISION_CORID_CORE_20K       3
-#define MIPS_REVISION_CORID_CORE_FPGA      4
-#define MIPS_REVISION_CORID_CORE_MSC       5
-#define MIPS_REVISION_CORID_CORE_EMUL      6
-#define MIPS_REVISION_CORID_CORE_FPGA2     7
-#define MIPS_REVISION_CORID_CORE_FPGAR2    8
-#define MIPS_REVISION_CORID_CORE_FPGA3     9
-#define MIPS_REVISION_CORID_CORE_24K       10
-#define MIPS_REVISION_CORID_CORE_FPGA4     11
-#define MIPS_REVISION_CORID_CORE_FPGA5     12
+#define MIPS_REVISION_REG		   0x1fc00010
+#define MIPS_REVISION_CORID_QED_RM5261	   0
+#define MIPS_REVISION_CORID_CORE_LV	   1
+#define MIPS_REVISION_CORID_BONITO64	   2
+#define MIPS_REVISION_CORID_CORE_20K	   3
+#define MIPS_REVISION_CORID_CORE_FPGA	   4
+#define MIPS_REVISION_CORID_CORE_MSC	   5
+#define MIPS_REVISION_CORID_CORE_EMUL	   6
+#define MIPS_REVISION_CORID_CORE_FPGA2	   7
+#define MIPS_REVISION_CORID_CORE_FPGAR2	   8
+#define MIPS_REVISION_CORID_CORE_FPGA3	   9
+#define MIPS_REVISION_CORID_CORE_24K	   10
+#define MIPS_REVISION_CORID_CORE_FPGA4	   11
+#define MIPS_REVISION_CORID_CORE_FPGA5	   12
 
 /**** Artificial corid defines ****/
 /*
@@ -87,10 +73,14 @@
 
 extern int mips_revision_sconid;
 
+#ifdef CONFIG_OF
+extern struct boot_param_header __dtb_start;
+#endif
+
 #ifdef CONFIG_PCI
 extern void mips_pcibios_init(void);
 #else
 #define mips_pcibios_init() do { } while (0)
 #endif
 
-#endif  /* __ASM_MIPS_BOARDS_GENERIC_H */
+#endif	/* __ASM_MIPS_BOARDS_GENERIC_H */
diff --git a/arch/mips/include/asm/mips-boards/launch.h b/arch/mips/include/asm/mips-boards/launch.h
index d8ae7f9..653477e 100644
--- a/arch/mips/include/asm/mips-boards/launch.h
+++ b/arch/mips/include/asm/mips-boards/launch.h
@@ -16,11 +16,11 @@
 #else
 
 #define LOG2CPULAUNCH	5
-#define	LAUNCH_PC	0
-#define	LAUNCH_GP	4
-#define	LAUNCH_SP	8
-#define	LAUNCH_A0	12
-#define	LAUNCH_FLAGS	28
+#define LAUNCH_PC	0
+#define LAUNCH_GP	4
+#define LAUNCH_SP	8
+#define LAUNCH_A0	12
+#define LAUNCH_FLAGS	28
 
 #endif
 
diff --git a/arch/mips/include/asm/mips-boards/malta.h b/arch/mips/include/asm/mips-boards/malta.h
index c189157..722bc88 100644
--- a/arch/mips/include/asm/mips-boards/malta.h
+++ b/arch/mips/include/asm/mips-boards/malta.h
@@ -33,9 +33,9 @@
  * Malta I/O ports base address for the Galileo GT64120 and Algorithmics
  * Bonito system controllers.
  */
-#define MALTA_GT_PORT_BASE      get_gt_port_base(GT_PCI0IOLD_OFS)
-#define MALTA_BONITO_PORT_BASE  ((unsigned long)ioremap (0x1fd00000, 0x10000))
-#define MALTA_MSC_PORT_BASE     get_msc_port_base(MSC01_PCI_SC2PIOBASL)
+#define MALTA_GT_PORT_BASE	get_gt_port_base(GT_PCI0IOLD_OFS)
+#define MALTA_BONITO_PORT_BASE	((unsigned long)ioremap (0x1fd00000, 0x10000))
+#define MALTA_MSC_PORT_BASE	get_msc_port_base(MSC01_PCI_SC2PIOBASL)
 
 static inline unsigned long get_gt_port_base(unsigned long reg)
 {
@@ -77,8 +77,8 @@
 /*
  * Malta RTC-device indirect register access.
  */
-#define MALTA_RTC_ADR_REG       0x70
-#define MALTA_RTC_DAT_REG       0x71
+#define MALTA_RTC_ADR_REG	0x70
+#define MALTA_RTC_DAT_REG	0x71
 
 /*
  * Malta SMSC FDC37M817 Super I/O Controller register.
diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h
index 6692448..e330732 100644
--- a/arch/mips/include/asm/mips-boards/maltaint.h
+++ b/arch/mips/include/asm/mips-boards/maltaint.h
@@ -4,8 +4,8 @@
  * for more details.
  *
  * Copyright (C) 2000,2012 MIPS Technologies, Inc.  All rights reserved.
- *      Carsten Langgaard <carstenl@mips.com>
- *      Steven J. Hill <sjhill@mips.com>
+ *	Carsten Langgaard <carstenl@mips.com>
+ *	Steven J. Hill <sjhill@mips.com>
  */
 #ifndef _MIPS_MALTAINT_H
 #define _MIPS_MALTAINT_H
@@ -24,9 +24,9 @@
 #define MIPSCPU_INT_I8259A	MIPSCPU_INT_MB0
 #define MIPSCPU_INT_MB1		3
 #define MIPSCPU_INT_SMI		MIPSCPU_INT_MB1
-#define MIPSCPU_INT_IPI0	MIPSCPU_INT_MB1	/* GIC IPI */
+#define MIPSCPU_INT_IPI0	MIPSCPU_INT_MB1 /* GIC IPI */
 #define MIPSCPU_INT_MB2		4
-#define MIPSCPU_INT_IPI1	MIPSCPU_INT_MB2	/* GIC IPI */
+#define MIPSCPU_INT_IPI1	MIPSCPU_INT_MB2 /* GIC IPI */
 #define MIPSCPU_INT_MB3		5
 #define MIPSCPU_INT_COREHI	MIPSCPU_INT_MB3
 #define MIPSCPU_INT_MB4		6
diff --git a/arch/mips/include/asm/mips-boards/piix4.h b/arch/mips/include/asm/mips-boards/piix4.h
index 2971d60..a02596c 100644
--- a/arch/mips/include/asm/mips-boards/piix4.h
+++ b/arch/mips/include/asm/mips-boards/piix4.h
@@ -53,7 +53,7 @@
 #define PIIX4_OCW2_SP		(0x6 << 5)
 #define PIIX4_OCW2_NOP		(0x2 << 5)
 
-#define PIIX4_OCW2_SEL          (0x0 << 3)
+#define PIIX4_OCW2_SEL		(0x0 << 3)
 
 #define PIIX4_OCW2_ILS_0	0
 #define PIIX4_OCW2_ILS_1	1
@@ -72,9 +72,9 @@
 #define PIIX4_OCW2_ILS_14	6
 #define PIIX4_OCW2_ILS_15	7
 
-#define PIIX4_OCW3_SEL          (0x1 << 3)
+#define PIIX4_OCW3_SEL		(0x1 << 3)
 
-#define PIIX4_OCW3_IRR          0x2
-#define PIIX4_OCW3_ISR          0x3
+#define PIIX4_OCW3_IRR		0x2
+#define PIIX4_OCW3_ISR		0x3
 
 #endif /* __ASM_MIPS_BOARDS_PIIX4_H */
diff --git a/arch/mips/include/asm/mips-boards/prom.h b/arch/mips/include/asm/mips-boards/prom.h
index a9db576..e7aed3e 100644
--- a/arch/mips/include/asm/mips-boards/prom.h
+++ b/arch/mips/include/asm/mips-boards/prom.h
@@ -39,9 +39,9 @@
 /* Memory descriptor management. */
 #define PROM_MAX_PMEMBLOCKS    32
 struct prom_pmemblock {
-        unsigned long base; /* Within KSEG0. */
-        unsigned int size;  /* In bytes. */
-        unsigned int type;  /* free or prom memory */
+	unsigned long base; /* Within KSEG0. */
+	unsigned int size;  /* In bytes. */
+	unsigned int type;  /* free or prom memory */
 };
 
 #endif /* !(_MIPS_PROM_H) */
diff --git a/arch/mips/include/asm/mips-boards/sead3int.h b/arch/mips/include/asm/mips-boards/sead3int.h
index d634d9a..6b17aaf 100644
--- a/arch/mips/include/asm/mips-boards/sead3int.h
+++ b/arch/mips/include/asm/mips-boards/sead3int.h
@@ -4,8 +4,8 @@
  * for more details.
  *
  * Copyright (C) 2000,2012 MIPS Technologies, Inc.  All rights reserved.
- *      Douglas Leung <douglas@mips.com>
- *      Steven J. Hill <sjhill@mips.com>
+ *	Douglas Leung <douglas@mips.com>
+ *	Steven J. Hill <sjhill@mips.com>
  */
 #ifndef _MIPS_SEAD3INT_H
 #define _MIPS_SEAD3INT_H
diff --git a/arch/mips/include/asm/mips-boards/sim.h b/arch/mips/include/asm/mips-boards/sim.h
index acb7c23..b112fdc 100644
--- a/arch/mips/include/asm/mips-boards/sim.h
+++ b/arch/mips/include/asm/mips-boards/sim.h
@@ -19,18 +19,18 @@
 #ifndef _ASM_MIPS_BOARDS_SIM_H
 #define _ASM_MIPS_BOARDS_SIM_H
 
-#define STATS_ON        1
-#define STATS_OFF       2
-#define STATS_CLEAR     3
-#define STATS_DUMP      4
+#define STATS_ON	1
+#define STATS_OFF	2
+#define STATS_CLEAR	3
+#define STATS_DUMP	4
 #define TRACE_ON		5
-#define TRACE_OFF       6
+#define TRACE_OFF	6
 
 
 #define simcfg(code)						\
 ({					   \
-	__asm__  __volatile__( \
-        "sltiu $0,$0, %0" \
+	__asm__	 __volatile__( \
+	"sltiu $0,$0, %0" \
 		::"i"(code)					\
 		); \
 })
diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h
index 5b3cb85..38b7704 100644
--- a/arch/mips/include/asm/mipsmtregs.h
+++ b/arch/mips/include/asm/mipsmtregs.h
@@ -270,14 +270,14 @@
 
 #define mftc0(rt,sel)							\
 ({									\
-	 unsigned long  __res;						\
+	 unsigned long	__res;						\
 									\
 	__asm__ __volatile__(						\
 	"	.set	push					\n"	\
 	"	.set	mips32r2				\n"	\
 	"	.set	noat					\n"	\
-	"	# mftc0	$1, $" #rt ", " #sel "			\n"	\
-	"	.word	0x41000800 | (" #rt " << 16) | " #sel "	\n"	\
+	"	# mftc0 $1, $" #rt ", " #sel "			\n"	\
+	"	.word	0x41000800 | (" #rt " << 16) | " #sel " \n"	\
 	"	move	%0, $1					\n"	\
 	"	.set	pop					\n"	\
 	: "=r" (__res));						\
@@ -334,7 +334,7 @@
 	"	.set	noat					\n"	\
 	"	move	$1, %0					\n"	\
 	"	# mttc0 %0," #rd ", " #sel "			\n"	\
-	"	.word	0x41810000 | (" #rd " << 11) | " #sel "	\n"	\
+	"	.word	0x41810000 | (" #rd " << 11) | " #sel " \n"	\
 	"	.set	pop					\n"	\
 	:								\
 	: "r" (v));							\
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 7e4e6f8..12b70c2 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -123,16 +123,16 @@
  * Status Register Values
  */
 
-#define FPU_CSR_FLUSH   0x01000000      /* flush denormalised results to 0 */
-#define FPU_CSR_COND    0x00800000      /* $fcc0 */
-#define FPU_CSR_COND0   0x00800000      /* $fcc0 */
-#define FPU_CSR_COND1   0x02000000      /* $fcc1 */
-#define FPU_CSR_COND2   0x04000000      /* $fcc2 */
-#define FPU_CSR_COND3   0x08000000      /* $fcc3 */
-#define FPU_CSR_COND4   0x10000000      /* $fcc4 */
-#define FPU_CSR_COND5   0x20000000      /* $fcc5 */
-#define FPU_CSR_COND6   0x40000000      /* $fcc6 */
-#define FPU_CSR_COND7   0x80000000      /* $fcc7 */
+#define FPU_CSR_FLUSH	0x01000000	/* flush denormalised results to 0 */
+#define FPU_CSR_COND	0x00800000	/* $fcc0 */
+#define FPU_CSR_COND0	0x00800000	/* $fcc0 */
+#define FPU_CSR_COND1	0x02000000	/* $fcc1 */
+#define FPU_CSR_COND2	0x04000000	/* $fcc2 */
+#define FPU_CSR_COND3	0x08000000	/* $fcc3 */
+#define FPU_CSR_COND4	0x10000000	/* $fcc4 */
+#define FPU_CSR_COND5	0x20000000	/* $fcc5 */
+#define FPU_CSR_COND6	0x40000000	/* $fcc6 */
+#define FPU_CSR_COND7	0x80000000	/* $fcc7 */
 
 /*
  * Bits 18 - 20 of the FPU Status Register will be read as 0,
@@ -145,34 +145,34 @@
  * E the exception enable
  * S the sticky/flag bit
 */
-#define FPU_CSR_ALL_X   0x0003f000
-#define FPU_CSR_UNI_X   0x00020000
-#define FPU_CSR_INV_X   0x00010000
-#define FPU_CSR_DIV_X   0x00008000
-#define FPU_CSR_OVF_X   0x00004000
-#define FPU_CSR_UDF_X   0x00002000
-#define FPU_CSR_INE_X   0x00001000
+#define FPU_CSR_ALL_X	0x0003f000
+#define FPU_CSR_UNI_X	0x00020000
+#define FPU_CSR_INV_X	0x00010000
+#define FPU_CSR_DIV_X	0x00008000
+#define FPU_CSR_OVF_X	0x00004000
+#define FPU_CSR_UDF_X	0x00002000
+#define FPU_CSR_INE_X	0x00001000
 
-#define FPU_CSR_ALL_E   0x00000f80
-#define FPU_CSR_INV_E   0x00000800
-#define FPU_CSR_DIV_E   0x00000400
-#define FPU_CSR_OVF_E   0x00000200
-#define FPU_CSR_UDF_E   0x00000100
-#define FPU_CSR_INE_E   0x00000080
+#define FPU_CSR_ALL_E	0x00000f80
+#define FPU_CSR_INV_E	0x00000800
+#define FPU_CSR_DIV_E	0x00000400
+#define FPU_CSR_OVF_E	0x00000200
+#define FPU_CSR_UDF_E	0x00000100
+#define FPU_CSR_INE_E	0x00000080
 
-#define FPU_CSR_ALL_S   0x0000007c
-#define FPU_CSR_INV_S   0x00000040
-#define FPU_CSR_DIV_S   0x00000020
-#define FPU_CSR_OVF_S   0x00000010
-#define FPU_CSR_UDF_S   0x00000008
-#define FPU_CSR_INE_S   0x00000004
+#define FPU_CSR_ALL_S	0x0000007c
+#define FPU_CSR_INV_S	0x00000040
+#define FPU_CSR_DIV_S	0x00000020
+#define FPU_CSR_OVF_S	0x00000010
+#define FPU_CSR_UDF_S	0x00000008
+#define FPU_CSR_INE_S	0x00000004
 
 /* Bits 0 and 1 of FPU Status Register specify the rounding mode */
 #define FPU_CSR_RM	0x00000003
-#define FPU_CSR_RN      0x0     /* nearest */
-#define FPU_CSR_RZ      0x1     /* towards zero */
-#define FPU_CSR_RU      0x2     /* towards +Infinity */
-#define FPU_CSR_RD      0x3     /* towards -Infinity */
+#define FPU_CSR_RN	0x0	/* nearest */
+#define FPU_CSR_RZ	0x1	/* towards zero */
+#define FPU_CSR_RU	0x2	/* towards +Infinity */
+#define FPU_CSR_RD	0x3	/* towards -Infinity */
 
 
 /*
@@ -214,15 +214,15 @@
  * Default page size for a given kernel configuration
  */
 #ifdef CONFIG_PAGE_SIZE_4KB
-#define PM_DEFAULT_MASK	PM_4K
+#define PM_DEFAULT_MASK PM_4K
 #elif defined(CONFIG_PAGE_SIZE_8KB)
-#define PM_DEFAULT_MASK	PM_8K
+#define PM_DEFAULT_MASK PM_8K
 #elif defined(CONFIG_PAGE_SIZE_16KB)
-#define PM_DEFAULT_MASK	PM_16K
+#define PM_DEFAULT_MASK PM_16K
 #elif defined(CONFIG_PAGE_SIZE_32KB)
-#define PM_DEFAULT_MASK	PM_32K
+#define PM_DEFAULT_MASK PM_32K
 #elif defined(CONFIG_PAGE_SIZE_64KB)
-#define PM_DEFAULT_MASK	PM_64K
+#define PM_DEFAULT_MASK PM_64K
 #else
 #error Bad page size configuration!
 #endif
@@ -260,34 +260,34 @@
 /*
  * PageGrain bits
  */
-#define PG_RIE		(_ULCAST_(1) <<  31)
-#define PG_XIE		(_ULCAST_(1) <<  30)
-#define PG_ELPA		(_ULCAST_(1) <<  29)
-#define PG_ESP		(_ULCAST_(1) <<  28)
+#define PG_RIE		(_ULCAST_(1) <<	 31)
+#define PG_XIE		(_ULCAST_(1) <<	 30)
+#define PG_ELPA		(_ULCAST_(1) <<	 29)
+#define PG_ESP		(_ULCAST_(1) <<	 28)
 
 /*
  * R4x00 interrupt enable / cause bits
  */
-#define IE_SW0          (_ULCAST_(1) <<  8)
-#define IE_SW1          (_ULCAST_(1) <<  9)
-#define IE_IRQ0         (_ULCAST_(1) << 10)
-#define IE_IRQ1         (_ULCAST_(1) << 11)
-#define IE_IRQ2         (_ULCAST_(1) << 12)
-#define IE_IRQ3         (_ULCAST_(1) << 13)
-#define IE_IRQ4         (_ULCAST_(1) << 14)
-#define IE_IRQ5         (_ULCAST_(1) << 15)
+#define IE_SW0		(_ULCAST_(1) <<	 8)
+#define IE_SW1		(_ULCAST_(1) <<	 9)
+#define IE_IRQ0		(_ULCAST_(1) << 10)
+#define IE_IRQ1		(_ULCAST_(1) << 11)
+#define IE_IRQ2		(_ULCAST_(1) << 12)
+#define IE_IRQ3		(_ULCAST_(1) << 13)
+#define IE_IRQ4		(_ULCAST_(1) << 14)
+#define IE_IRQ5		(_ULCAST_(1) << 15)
 
 /*
  * R4x00 interrupt cause bits
  */
-#define C_SW0           (_ULCAST_(1) <<  8)
-#define C_SW1           (_ULCAST_(1) <<  9)
-#define C_IRQ0          (_ULCAST_(1) << 10)
-#define C_IRQ1          (_ULCAST_(1) << 11)
-#define C_IRQ2          (_ULCAST_(1) << 12)
-#define C_IRQ3          (_ULCAST_(1) << 13)
-#define C_IRQ4          (_ULCAST_(1) << 14)
-#define C_IRQ5          (_ULCAST_(1) << 15)
+#define C_SW0		(_ULCAST_(1) <<	 8)
+#define C_SW1		(_ULCAST_(1) <<	 9)
+#define C_IRQ0		(_ULCAST_(1) << 10)
+#define C_IRQ1		(_ULCAST_(1) << 11)
+#define C_IRQ2		(_ULCAST_(1) << 12)
+#define C_IRQ3		(_ULCAST_(1) << 13)
+#define C_IRQ4		(_ULCAST_(1) << 14)
+#define C_IRQ5		(_ULCAST_(1) << 15)
 
 /*
  * Bitfields in the R4xx0 cp0 status register
@@ -301,7 +301,7 @@
 #  define KSU_KERNEL		0x00000000
 #define ST0_UX			0x00000020
 #define ST0_SX			0x00000040
-#define ST0_KX 			0x00000080
+#define ST0_KX			0x00000080
 #define ST0_DE			0x00010000
 #define ST0_CE			0x00020000
 
@@ -315,7 +315,7 @@
 /*
  * Bitfields in the R[23]000 cp0 status register.
  */
-#define ST0_IEC                 0x00000001
+#define ST0_IEC			0x00000001
 #define ST0_KUC			0x00000002
 #define ST0_IEP			0x00000004
 #define ST0_KUP			0x00000008
@@ -329,7 +329,7 @@
 /*
  * Bits specific to the R4640/R4650
  */
-#define ST0_UM			(_ULCAST_(1) <<  4)
+#define ST0_UM			(_ULCAST_(1) <<	 4)
 #define ST0_IL			(_ULCAST_(1) << 23)
 #define ST0_DL			(_ULCAST_(1) << 24)
 
@@ -343,22 +343,22 @@
  */
 #define TX39_CONF_ICS_SHIFT	19
 #define TX39_CONF_ICS_MASK	0x00380000
-#define TX39_CONF_ICS_1KB 	0x00000000
-#define TX39_CONF_ICS_2KB 	0x00080000
-#define TX39_CONF_ICS_4KB 	0x00100000
-#define TX39_CONF_ICS_8KB 	0x00180000
-#define TX39_CONF_ICS_16KB 	0x00200000
+#define TX39_CONF_ICS_1KB	0x00000000
+#define TX39_CONF_ICS_2KB	0x00080000
+#define TX39_CONF_ICS_4KB	0x00100000
+#define TX39_CONF_ICS_8KB	0x00180000
+#define TX39_CONF_ICS_16KB	0x00200000
 
 #define TX39_CONF_DCS_SHIFT	16
 #define TX39_CONF_DCS_MASK	0x00070000
-#define TX39_CONF_DCS_1KB 	0x00000000
-#define TX39_CONF_DCS_2KB 	0x00010000
-#define TX39_CONF_DCS_4KB 	0x00020000
-#define TX39_CONF_DCS_8KB 	0x00030000
-#define TX39_CONF_DCS_16KB 	0x00040000
+#define TX39_CONF_DCS_1KB	0x00000000
+#define TX39_CONF_DCS_2KB	0x00010000
+#define TX39_CONF_DCS_4KB	0x00020000
+#define TX39_CONF_DCS_8KB	0x00030000
+#define TX39_CONF_DCS_16KB	0x00040000
 
-#define TX39_CONF_CWFON 	0x00004000
-#define TX39_CONF_WBON  	0x00002000
+#define TX39_CONF_CWFON		0x00004000
+#define TX39_CONF_WBON		0x00002000
 #define TX39_CONF_RF_SHIFT	10
 #define TX39_CONF_RF_MASK	0x00000c00
 #define TX39_CONF_DOZE		0x00000200
@@ -375,38 +375,38 @@
  * Status register bits available in all MIPS CPUs.
  */
 #define ST0_IM			0x0000ff00
-#define  STATUSB_IP0		8
-#define  STATUSF_IP0		(_ULCAST_(1) <<  8)
-#define  STATUSB_IP1		9
-#define  STATUSF_IP1		(_ULCAST_(1) <<  9)
-#define  STATUSB_IP2		10
-#define  STATUSF_IP2		(_ULCAST_(1) << 10)
-#define  STATUSB_IP3		11
-#define  STATUSF_IP3		(_ULCAST_(1) << 11)
-#define  STATUSB_IP4		12
-#define  STATUSF_IP4		(_ULCAST_(1) << 12)
-#define  STATUSB_IP5		13
-#define  STATUSF_IP5		(_ULCAST_(1) << 13)
-#define  STATUSB_IP6		14
-#define  STATUSF_IP6		(_ULCAST_(1) << 14)
-#define  STATUSB_IP7		15
-#define  STATUSF_IP7		(_ULCAST_(1) << 15)
-#define  STATUSB_IP8		0
-#define  STATUSF_IP8		(_ULCAST_(1) <<  0)
-#define  STATUSB_IP9		1
-#define  STATUSF_IP9		(_ULCAST_(1) <<  1)
-#define  STATUSB_IP10		2
-#define  STATUSF_IP10		(_ULCAST_(1) <<  2)
-#define  STATUSB_IP11		3
-#define  STATUSF_IP11		(_ULCAST_(1) <<  3)
-#define  STATUSB_IP12		4
-#define  STATUSF_IP12		(_ULCAST_(1) <<  4)
-#define  STATUSB_IP13		5
-#define  STATUSF_IP13		(_ULCAST_(1) <<  5)
-#define  STATUSB_IP14		6
-#define  STATUSF_IP14		(_ULCAST_(1) <<  6)
-#define  STATUSB_IP15		7
-#define  STATUSF_IP15		(_ULCAST_(1) <<  7)
+#define	 STATUSB_IP0		8
+#define	 STATUSF_IP0		(_ULCAST_(1) <<	 8)
+#define	 STATUSB_IP1		9
+#define	 STATUSF_IP1		(_ULCAST_(1) <<	 9)
+#define	 STATUSB_IP2		10
+#define	 STATUSF_IP2		(_ULCAST_(1) << 10)
+#define	 STATUSB_IP3		11
+#define	 STATUSF_IP3		(_ULCAST_(1) << 11)
+#define	 STATUSB_IP4		12
+#define	 STATUSF_IP4		(_ULCAST_(1) << 12)
+#define	 STATUSB_IP5		13
+#define	 STATUSF_IP5		(_ULCAST_(1) << 13)
+#define	 STATUSB_IP6		14
+#define	 STATUSF_IP6		(_ULCAST_(1) << 14)
+#define	 STATUSB_IP7		15
+#define	 STATUSF_IP7		(_ULCAST_(1) << 15)
+#define	 STATUSB_IP8		0
+#define	 STATUSF_IP8		(_ULCAST_(1) <<	 0)
+#define	 STATUSB_IP9		1
+#define	 STATUSF_IP9		(_ULCAST_(1) <<	 1)
+#define	 STATUSB_IP10		2
+#define	 STATUSF_IP10		(_ULCAST_(1) <<	 2)
+#define	 STATUSB_IP11		3
+#define	 STATUSF_IP11		(_ULCAST_(1) <<	 3)
+#define	 STATUSB_IP12		4
+#define	 STATUSF_IP12		(_ULCAST_(1) <<	 4)
+#define	 STATUSB_IP13		5
+#define	 STATUSF_IP13		(_ULCAST_(1) <<	 5)
+#define	 STATUSB_IP14		6
+#define	 STATUSF_IP14		(_ULCAST_(1) <<	 6)
+#define	 STATUSB_IP15		7
+#define	 STATUSF_IP15		(_ULCAST_(1) <<	 7)
 #define ST0_CH			0x00040000
 #define ST0_NMI			0x00080000
 #define ST0_SR			0x00100000
@@ -436,36 +436,36 @@
  *
  * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
  */
-#define  CAUSEB_EXCCODE		2
-#define  CAUSEF_EXCCODE		(_ULCAST_(31)  <<  2)
-#define  CAUSEB_IP		8
-#define  CAUSEF_IP		(_ULCAST_(255) <<  8)
-#define  CAUSEB_IP0		8
-#define  CAUSEF_IP0		(_ULCAST_(1)   <<  8)
-#define  CAUSEB_IP1		9
-#define  CAUSEF_IP1		(_ULCAST_(1)   <<  9)
-#define  CAUSEB_IP2		10
-#define  CAUSEF_IP2		(_ULCAST_(1)   << 10)
-#define  CAUSEB_IP3		11
-#define  CAUSEF_IP3		(_ULCAST_(1)   << 11)
-#define  CAUSEB_IP4		12
-#define  CAUSEF_IP4		(_ULCAST_(1)   << 12)
-#define  CAUSEB_IP5		13
-#define  CAUSEF_IP5		(_ULCAST_(1)   << 13)
-#define  CAUSEB_IP6		14
-#define  CAUSEF_IP6		(_ULCAST_(1)   << 14)
-#define  CAUSEB_IP7		15
-#define  CAUSEF_IP7		(_ULCAST_(1)   << 15)
-#define  CAUSEB_IV		23
-#define  CAUSEF_IV		(_ULCAST_(1)   << 23)
-#define  CAUSEB_PCI		26
-#define  CAUSEF_PCI		(_ULCAST_(1)   << 26)
-#define  CAUSEB_CE		28
-#define  CAUSEF_CE		(_ULCAST_(3)   << 28)
-#define  CAUSEB_TI		30
-#define  CAUSEF_TI		(_ULCAST_(1)   << 30)
-#define  CAUSEB_BD		31
-#define  CAUSEF_BD		(_ULCAST_(1)   << 31)
+#define	 CAUSEB_EXCCODE		2
+#define	 CAUSEF_EXCCODE		(_ULCAST_(31)  <<  2)
+#define	 CAUSEB_IP		8
+#define	 CAUSEF_IP		(_ULCAST_(255) <<  8)
+#define	 CAUSEB_IP0		8
+#define	 CAUSEF_IP0		(_ULCAST_(1)   <<  8)
+#define	 CAUSEB_IP1		9
+#define	 CAUSEF_IP1		(_ULCAST_(1)   <<  9)
+#define	 CAUSEB_IP2		10
+#define	 CAUSEF_IP2		(_ULCAST_(1)   << 10)
+#define	 CAUSEB_IP3		11
+#define	 CAUSEF_IP3		(_ULCAST_(1)   << 11)
+#define	 CAUSEB_IP4		12
+#define	 CAUSEF_IP4		(_ULCAST_(1)   << 12)
+#define	 CAUSEB_IP5		13
+#define	 CAUSEF_IP5		(_ULCAST_(1)   << 13)
+#define	 CAUSEB_IP6		14
+#define	 CAUSEF_IP6		(_ULCAST_(1)   << 14)
+#define	 CAUSEB_IP7		15
+#define	 CAUSEF_IP7		(_ULCAST_(1)   << 15)
+#define	 CAUSEB_IV		23
+#define	 CAUSEF_IV		(_ULCAST_(1)   << 23)
+#define	 CAUSEB_PCI		26
+#define	 CAUSEF_PCI		(_ULCAST_(1)   << 26)
+#define	 CAUSEB_CE		28
+#define	 CAUSEF_CE		(_ULCAST_(3)   << 28)
+#define	 CAUSEB_TI		30
+#define	 CAUSEF_TI		(_ULCAST_(1)   << 30)
+#define	 CAUSEB_BD		31
+#define	 CAUSEF_BD		(_ULCAST_(1)   << 31)
 
 /*
  * Bits in the coprocessor 0 config register.
@@ -483,11 +483,11 @@
 #define CONF_BE			(_ULCAST_(1) << 15)
 
 /* Bits common to various processors.  */
-#define CONF_CU			(_ULCAST_(1) <<  3)
-#define CONF_DB			(_ULCAST_(1) <<  4)
-#define CONF_IB			(_ULCAST_(1) <<  5)
-#define CONF_DC			(_ULCAST_(7) <<  6)
-#define CONF_IC			(_ULCAST_(7) <<  9)
+#define CONF_CU			(_ULCAST_(1) <<	 3)
+#define CONF_DB			(_ULCAST_(1) <<	 4)
+#define CONF_IB			(_ULCAST_(1) <<	 5)
+#define CONF_DC			(_ULCAST_(7) <<	 6)
+#define CONF_IC			(_ULCAST_(7) <<	 9)
 #define CONF_EB			(_ULCAST_(1) << 13)
 #define CONF_EM			(_ULCAST_(1) << 14)
 #define CONF_SM			(_ULCAST_(1) << 16)
@@ -497,29 +497,29 @@
 #define CONF_EC			(_ULCAST_(7) << 28)
 #define CONF_CM			(_ULCAST_(1) << 31)
 
-/* Bits specific to the R4xx0.  */
+/* Bits specific to the R4xx0.	*/
 #define R4K_CONF_SW		(_ULCAST_(1) << 20)
 #define R4K_CONF_SS		(_ULCAST_(1) << 21)
 #define R4K_CONF_SB		(_ULCAST_(3) << 22)
 
-/* Bits specific to the R5000.  */
+/* Bits specific to the R5000.	*/
 #define R5K_CONF_SE		(_ULCAST_(1) << 12)
 #define R5K_CONF_SS		(_ULCAST_(3) << 20)
 
-/* Bits specific to the RM7000.  */
-#define RM7K_CONF_SE		(_ULCAST_(1) <<  3)
+/* Bits specific to the RM7000.	 */
+#define RM7K_CONF_SE		(_ULCAST_(1) <<	 3)
 #define RM7K_CONF_TE		(_ULCAST_(1) << 12)
 #define RM7K_CONF_CLK		(_ULCAST_(1) << 16)
 #define RM7K_CONF_TC		(_ULCAST_(1) << 17)
 #define RM7K_CONF_SI		(_ULCAST_(3) << 20)
 #define RM7K_CONF_SC		(_ULCAST_(1) << 31)
 
-/* Bits specific to the R10000.  */
-#define R10K_CONF_DN		(_ULCAST_(3) <<  3)
-#define R10K_CONF_CT		(_ULCAST_(1) <<  5)
-#define R10K_CONF_PE		(_ULCAST_(1) <<  6)
-#define R10K_CONF_PM		(_ULCAST_(3) <<  7)
-#define R10K_CONF_EC		(_ULCAST_(15)<<  9)
+/* Bits specific to the R10000.	 */
+#define R10K_CONF_DN		(_ULCAST_(3) <<	 3)
+#define R10K_CONF_CT		(_ULCAST_(1) <<	 5)
+#define R10K_CONF_PE		(_ULCAST_(1) <<	 6)
+#define R10K_CONF_PM		(_ULCAST_(3) <<	 7)
+#define R10K_CONF_EC		(_ULCAST_(15)<<	 9)
 #define R10K_CONF_SB		(_ULCAST_(1) << 13)
 #define R10K_CONF_SK		(_ULCAST_(1) << 14)
 #define R10K_CONF_SS		(_ULCAST_(7) << 16)
@@ -527,14 +527,14 @@
 #define R10K_CONF_DC		(_ULCAST_(7) << 26)
 #define R10K_CONF_IC		(_ULCAST_(7) << 29)
 
-/* Bits specific to the VR41xx.  */
+/* Bits specific to the VR41xx.	 */
 #define VR41_CONF_CS		(_ULCAST_(1) << 12)
 #define VR41_CONF_P4K		(_ULCAST_(1) << 13)
 #define VR41_CONF_BP		(_ULCAST_(1) << 16)
 #define VR41_CONF_M16		(_ULCAST_(1) << 20)
 #define VR41_CONF_AD		(_ULCAST_(1) << 23)
 
-/* Bits specific to the R30xx.  */
+/* Bits specific to the R30xx.	*/
 #define R30XX_CONF_FDM		(_ULCAST_(1) << 19)
 #define R30XX_CONF_REV		(_ULCAST_(1) << 22)
 #define R30XX_CONF_AC		(_ULCAST_(1) << 23)
@@ -551,8 +551,8 @@
 #define TX49_CONF_HALT		(_ULCAST_(1) << 18)
 #define TX49_CONF_CWFON		(_ULCAST_(1) << 27)
 
-/* Bits specific to the MIPS32/64 PRA.  */
-#define MIPS_CONF_MT		(_ULCAST_(7) <<  7)
+/* Bits specific to the MIPS32/64 PRA.	*/
+#define MIPS_CONF_MT		(_ULCAST_(7) <<	 7)
 #define MIPS_CONF_AR		(_ULCAST_(7) << 10)
 #define MIPS_CONF_AT		(_ULCAST_(3) << 13)
 #define MIPS_CONF_M		(_ULCAST_(1) << 31)
@@ -560,14 +560,14 @@
 /*
  * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above.
  */
-#define MIPS_CONF1_FP		(_ULCAST_(1) <<  0)
-#define MIPS_CONF1_EP		(_ULCAST_(1) <<  1)
-#define MIPS_CONF1_CA		(_ULCAST_(1) <<  2)
-#define MIPS_CONF1_WR		(_ULCAST_(1) <<  3)
-#define MIPS_CONF1_PC		(_ULCAST_(1) <<  4)
-#define MIPS_CONF1_MD		(_ULCAST_(1) <<  5)
-#define MIPS_CONF1_C2		(_ULCAST_(1) <<  6)
-#define MIPS_CONF1_DA		(_ULCAST_(7) <<  7)
+#define MIPS_CONF1_FP		(_ULCAST_(1) <<	 0)
+#define MIPS_CONF1_EP		(_ULCAST_(1) <<	 1)
+#define MIPS_CONF1_CA		(_ULCAST_(1) <<	 2)
+#define MIPS_CONF1_WR		(_ULCAST_(1) <<	 3)
+#define MIPS_CONF1_PC		(_ULCAST_(1) <<	 4)
+#define MIPS_CONF1_MD		(_ULCAST_(1) <<	 5)
+#define MIPS_CONF1_C2		(_ULCAST_(1) <<	 6)
+#define MIPS_CONF1_DA		(_ULCAST_(7) <<	 7)
 #define MIPS_CONF1_DL		(_ULCAST_(7) << 10)
 #define MIPS_CONF1_DS		(_ULCAST_(7) << 13)
 #define MIPS_CONF1_IA		(_ULCAST_(7) << 16)
@@ -575,26 +575,28 @@
 #define MIPS_CONF1_IS		(_ULCAST_(7) << 22)
 #define MIPS_CONF1_TLBS		(_ULCAST_(63)<< 25)
 
-#define MIPS_CONF2_SA		(_ULCAST_(15)<<  0)
-#define MIPS_CONF2_SL		(_ULCAST_(15)<<  4)
-#define MIPS_CONF2_SS		(_ULCAST_(15)<<  8)
+#define MIPS_CONF2_SA		(_ULCAST_(15)<<	 0)
+#define MIPS_CONF2_SL		(_ULCAST_(15)<<	 4)
+#define MIPS_CONF2_SS		(_ULCAST_(15)<<	 8)
 #define MIPS_CONF2_SU		(_ULCAST_(15)<< 12)
 #define MIPS_CONF2_TA		(_ULCAST_(15)<< 16)
 #define MIPS_CONF2_TL		(_ULCAST_(15)<< 20)
 #define MIPS_CONF2_TS		(_ULCAST_(15)<< 24)
 #define MIPS_CONF2_TU		(_ULCAST_(7) << 28)
 
-#define MIPS_CONF3_TL		(_ULCAST_(1) <<  0)
-#define MIPS_CONF3_SM		(_ULCAST_(1) <<  1)
-#define MIPS_CONF3_MT		(_ULCAST_(1) <<  2)
-#define MIPS_CONF3_SP		(_ULCAST_(1) <<  4)
-#define MIPS_CONF3_VINT		(_ULCAST_(1) <<  5)
-#define MIPS_CONF3_VEIC		(_ULCAST_(1) <<  6)
-#define MIPS_CONF3_LPA		(_ULCAST_(1) <<  7)
+#define MIPS_CONF3_TL		(_ULCAST_(1) <<	 0)
+#define MIPS_CONF3_SM		(_ULCAST_(1) <<	 1)
+#define MIPS_CONF3_MT		(_ULCAST_(1) <<	 2)
+#define MIPS_CONF3_SP		(_ULCAST_(1) <<	 4)
+#define MIPS_CONF3_VINT		(_ULCAST_(1) <<	 5)
+#define MIPS_CONF3_VEIC		(_ULCAST_(1) <<	 6)
+#define MIPS_CONF3_LPA		(_ULCAST_(1) <<	 7)
 #define MIPS_CONF3_DSP		(_ULCAST_(1) << 10)
 #define MIPS_CONF3_DSP2P	(_ULCAST_(1) << 11)
 #define MIPS_CONF3_RXI		(_ULCAST_(1) << 12)
 #define MIPS_CONF3_ULRI		(_ULCAST_(1) << 13)
+#define MIPS_CONF3_ISA		(_ULCAST_(3) << 14)
+#define MIPS_CONF3_VZ		(_ULCAST_(1) << 23)
 
 #define MIPS_CONF4_MMUSIZEEXT	(_ULCAST_(255) << 0)
 #define MIPS_CONF4_MMUEXTDEF	(_ULCAST_(3) << 14)
@@ -621,7 +623,7 @@
 #ifndef __ASSEMBLY__
 
 /*
- * Functions to access the R10000 performance counters.  These are basically
+ * Functions to access the R10000 performance counters.	 These are basically
  * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit
  * performance counter number encoded into bits 1 ... 5 of the instruction.
  * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware
@@ -632,13 +634,13 @@
 	unsigned int __res;					\
 	__asm__ __volatile__(					\
 	"mfpc\t%0, %1"						\
-        : "=r" (__res)						\
+	: "=r" (__res)						\
 	: "i" (counter));					\
 								\
-        __res;							\
+	__res;							\
 })
 
-#define write_r10k_perf_cntr(counter,val)                       \
+#define write_r10k_perf_cntr(counter,val)			\
 do {								\
 	__asm__ __volatile__(					\
 	"mtpc\t%0, %1"						\
@@ -651,13 +653,13 @@
 	unsigned int __res;					\
 	__asm__ __volatile__(					\
 	"mfps\t%0, %1"						\
-        : "=r" (__res)						\
+	: "=r" (__res)						\
 	: "i" (counter));					\
 								\
-        __res;							\
+	__res;							\
 })
 
-#define write_r10k_perf_cntl(counter,val)                       \
+#define write_r10k_perf_cntl(counter,val)			\
 do {								\
 	__asm__ __volatile__(					\
 	"mtps\t%0, %1"						\
@@ -847,20 +849,20 @@
 #define write_c0_context(val)	__write_ulong_c0_register($4, 0, val)
 
 #define read_c0_userlocal()	__read_ulong_c0_register($4, 2)
-#define write_c0_userlocal(val)	__write_ulong_c0_register($4, 2, val)
+#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val)
 
 #define read_c0_pagemask()	__read_32bit_c0_register($5, 0)
 #define write_c0_pagemask(val)	__write_32bit_c0_register($5, 0, val)
 
 #define read_c0_pagegrain()	__read_32bit_c0_register($5, 1)
-#define write_c0_pagegrain(val)	__write_32bit_c0_register($5, 1, val)
+#define write_c0_pagegrain(val) __write_32bit_c0_register($5, 1, val)
 
 #define read_c0_wired()		__read_32bit_c0_register($6, 0)
 #define write_c0_wired(val)	__write_32bit_c0_register($6, 0, val)
 
 #define read_c0_info()		__read_32bit_c0_register($7, 0)
 
-#define read_c0_cache()		__read_32bit_c0_register($7, 0)	/* TX39xx */
+#define read_c0_cache()		__read_32bit_c0_register($7, 0) /* TX39xx */
 #define write_c0_cache(val)	__write_32bit_c0_register($7, 0, val)
 
 #define read_c0_badvaddr()	__read_ulong_c0_register($8, 0)
@@ -975,7 +977,7 @@
 #define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val)
 
 #define read_c0_framemask()	__read_32bit_c0_register($21, 0)
-#define write_c0_framemask(val)	__write_32bit_c0_register($21, 0, val)
+#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val)
 
 #define read_c0_diag()		__read_32bit_c0_register($22, 0)
 #define write_c0_diag(val)	__write_32bit_c0_register($22, 0, val)
@@ -1005,27 +1007,27 @@
  * MIPS32 / MIPS64 performance counters
  */
 #define read_c0_perfctrl0()	__read_32bit_c0_register($25, 0)
-#define write_c0_perfctrl0(val)	__write_32bit_c0_register($25, 0, val)
+#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val)
 #define read_c0_perfcntr0()	__read_32bit_c0_register($25, 1)
-#define write_c0_perfcntr0(val)	__write_32bit_c0_register($25, 1, val)
+#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val)
 #define read_c0_perfcntr0_64()	__read_64bit_c0_register($25, 1)
 #define write_c0_perfcntr0_64(val) __write_64bit_c0_register($25, 1, val)
 #define read_c0_perfctrl1()	__read_32bit_c0_register($25, 2)
-#define write_c0_perfctrl1(val)	__write_32bit_c0_register($25, 2, val)
+#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val)
 #define read_c0_perfcntr1()	__read_32bit_c0_register($25, 3)
-#define write_c0_perfcntr1(val)	__write_32bit_c0_register($25, 3, val)
+#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val)
 #define read_c0_perfcntr1_64()	__read_64bit_c0_register($25, 3)
 #define write_c0_perfcntr1_64(val) __write_64bit_c0_register($25, 3, val)
 #define read_c0_perfctrl2()	__read_32bit_c0_register($25, 4)
-#define write_c0_perfctrl2(val)	__write_32bit_c0_register($25, 4, val)
+#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val)
 #define read_c0_perfcntr2()	__read_32bit_c0_register($25, 5)
-#define write_c0_perfcntr2(val)	__write_32bit_c0_register($25, 5, val)
+#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val)
 #define read_c0_perfcntr2_64()	__read_64bit_c0_register($25, 5)
 #define write_c0_perfcntr2_64(val) __write_64bit_c0_register($25, 5, val)
 #define read_c0_perfctrl3()	__read_32bit_c0_register($25, 6)
-#define write_c0_perfctrl3(val)	__write_32bit_c0_register($25, 6, val)
+#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val)
 #define read_c0_perfcntr3()	__read_32bit_c0_register($25, 7)
-#define write_c0_perfcntr3(val)	__write_32bit_c0_register($25, 7, val)
+#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val)
 #define read_c0_perfcntr3_64()	__read_64bit_c0_register($25, 7)
 #define write_c0_perfcntr3_64(val) __write_64bit_c0_register($25, 7, val)
 
@@ -1033,12 +1035,12 @@
 #define write_c0_ecc(val)	__write_32bit_c0_register($26, 0, val)
 
 #define read_c0_derraddr0()	__read_ulong_c0_register($26, 1)
-#define write_c0_derraddr0(val)	__write_ulong_c0_register($26, 1, val)
+#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val)
 
 #define read_c0_cacheerr()	__read_32bit_c0_register($27, 0)
 
 #define read_c0_derraddr1()	__read_ulong_c0_register($27, 1)
-#define write_c0_derraddr1(val)	__write_ulong_c0_register($27, 1, val)
+#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val)
 
 #define read_c0_taglo()		__read_32bit_c0_register($28, 0)
 #define write_c0_taglo(val)	__write_32bit_c0_register($28, 0, val)
@@ -1083,9 +1085,9 @@
 #define write_c0_cvmctl(val)	__write_64bit_c0_register($9, 7, val)
 
 #define read_c0_cvmmemctl()	__read_64bit_c0_register($11, 7)
-#define write_c0_cvmmemctl(val)	__write_64bit_c0_register($11, 7, val)
+#define write_c0_cvmmemctl(val) __write_64bit_c0_register($11, 7, val)
 /*
- * The cacheerr registers are not standardized.  On OCTEON, they are
+ * The cacheerr registers are not standardized.	 On OCTEON, they are
  * 64 bits wide.
  */
 #define read_octeon_c0_icacheerr()	__read_64bit_c0_register($27, 0)
@@ -1142,18 +1144,152 @@
 /*
  * Macros to access the floating point coprocessor control registers
  */
-#define read_32bit_cp1_register(source)                         \
-({ int __res;                                                   \
-	__asm__ __volatile__(                                   \
-	".set\tpush\n\t"					\
-	".set\treorder\n\t"					\
-	/* gas fails to assemble cfc1 for some archs (octeon).*/ \
-	".set\tmips1\n\t"					\
-        "cfc1\t%0,"STR(source)"\n\t"                            \
-	".set\tpop"						\
-        : "=r" (__res));                                        \
-        __res;})
+#define read_32bit_cp1_register(source)					\
+({									\
+	int __res;							\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	reorder					\n"	\
+	"	# gas fails to assemble cfc1 for some archs,	\n"	\
+	"	# like Octeon.					\n"	\
+	"	.set	mips1					\n"	\
+	"	cfc1	%0,"STR(source)"			\n"	\
+	"	.set	pop					\n"	\
+	: "=r" (__res));						\
+	__res;								\
+})
 
+#ifdef HAVE_AS_DSP
+#define rddsp(mask)							\
+({									\
+	unsigned int __dspctl;						\
+									\
+	__asm__ __volatile__(						\
+	"	rddsp	%0, %x1					\n"	\
+	: "=r" (__dspctl)						\
+	: "i" (mask));							\
+	__dspctl;							\
+})
+
+#define wrdsp(val, mask)						\
+do {									\
+	__asm__ __volatile__(						\
+	"	wrdsp	%0, %x1					\n"	\
+	:								\
+	: "r" (val), "i" (mask));					\
+} while (0)
+
+#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
+#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
+#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
+#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
+
+#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
+#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
+#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
+#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
+
+#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
+#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
+#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
+#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
+
+#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
+#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
+#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
+#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
+
+#else
+
+#ifdef CONFIG_CPU_MICROMIPS
+#define rddsp(mask)							\
+({									\
+	unsigned int __res;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	# rddsp $1, %x1					\n"	\
+	"	.hword	((0x0020067c | (%x1 << 14)) >> 16)	\n"	\
+	"	.hword	((0x0020067c | (%x1 << 14)) & 0xffff)	\n"	\
+	"	move	%0, $1					\n"	\
+	"	.set	pop					\n"	\
+	: "=r" (__res)							\
+	: "i" (mask));							\
+	__res;								\
+})
+
+#define wrdsp(val, mask)						\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	# wrdsp $1, %x1					\n"	\
+	"	.hword	((0x0020167c | (%x1 << 14)) >> 16)	\n"	\
+	"	.hword	((0x0020167c | (%x1 << 14)) & 0xffff)	\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (val), "i" (mask));					\
+} while (0)
+
+#define _umips_dsp_mfxxx(ins)						\
+({									\
+	unsigned long __treg;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	.hword	0x0001					\n"	\
+	"	.hword	%x1					\n"	\
+	"	move	%0, $1					\n"	\
+	"	.set	pop					\n"	\
+	: "=r" (__treg)							\
+	: "i" (ins));							\
+	__treg;								\
+})
+
+#define _umips_dsp_mtxxx(val, ins)					\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	move	$1, %0					\n"	\
+	"	.hword	0x0001					\n"	\
+	"	.hword	%x1					\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (val), "i" (ins));					\
+} while (0)
+
+#define _umips_dsp_mflo(reg) _umips_dsp_mfxxx((reg << 14) | 0x107c)
+#define _umips_dsp_mfhi(reg) _umips_dsp_mfxxx((reg << 14) | 0x007c)
+
+#define _umips_dsp_mtlo(val, reg) _umips_dsp_mtxxx(val, ((reg << 14) | 0x307c))
+#define _umips_dsp_mthi(val, reg) _umips_dsp_mtxxx(val, ((reg << 14) | 0x207c))
+
+#define mflo0() _umips_dsp_mflo(0)
+#define mflo1() _umips_dsp_mflo(1)
+#define mflo2() _umips_dsp_mflo(2)
+#define mflo3() _umips_dsp_mflo(3)
+
+#define mfhi0() _umips_dsp_mfhi(0)
+#define mfhi1() _umips_dsp_mfhi(1)
+#define mfhi2() _umips_dsp_mfhi(2)
+#define mfhi3() _umips_dsp_mfhi(3)
+
+#define mtlo0(x) _umips_dsp_mtlo(x, 0)
+#define mtlo1(x) _umips_dsp_mtlo(x, 1)
+#define mtlo2(x) _umips_dsp_mtlo(x, 2)
+#define mtlo3(x) _umips_dsp_mtlo(x, 3)
+
+#define mthi0(x) _umips_dsp_mthi(x, 0)
+#define mthi1(x) _umips_dsp_mthi(x, 1)
+#define mthi2(x) _umips_dsp_mthi(x, 2)
+#define mthi3(x) _umips_dsp_mthi(x, 3)
+
+#else  /* !CONFIG_CPU_MICROMIPS */
 #define rddsp(mask)							\
 ({									\
 	unsigned int __res;						\
@@ -1183,253 +1319,60 @@
 	: "r" (val), "i" (mask));					\
 } while (0)
 
-#if 0	/* Need DSP ASE capable assembler ... */
-#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
-#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
-#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
-#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
-
-#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
-#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
-#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
-#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
-
-#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
-#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
-#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
-#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
-
-#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
-#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
-#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
-#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
-
-#else
-
-#define mfhi0()								\
+#define _dsp_mfxxx(ins)							\
 ({									\
 	unsigned long __treg;						\
 									\
 	__asm__ __volatile__(						\
-	"	.set	push			\n"			\
-	"	.set	noat			\n"			\
-	"	# mfhi	%0, $ac0		\n"			\
-	"	.word	0x00000810		\n"			\
-	"	move	%0, $1			\n"			\
-	"	.set	pop			\n"			\
-	: "=r" (__treg));						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	.word	(0x00000810 | %1)			\n"	\
+	"	move	%0, $1					\n"	\
+	"	.set	pop					\n"	\
+	: "=r" (__treg)							\
+	: "i" (ins));							\
 	__treg;								\
 })
 
-#define mfhi1()								\
-({									\
-	unsigned long __treg;						\
-									\
-	__asm__ __volatile__(						\
-	"	.set	push			\n"			\
-	"	.set	noat			\n"			\
-	"	# mfhi	%0, $ac1		\n"			\
-	"	.word	0x00200810		\n"			\
-	"	move	%0, $1			\n"			\
-	"	.set	pop			\n"			\
-	: "=r" (__treg));						\
-	__treg;								\
-})
-
-#define mfhi2()								\
-({									\
-	unsigned long __treg;						\
-									\
-	__asm__ __volatile__(						\
-	"	.set	push			\n"			\
-	"	.set	noat			\n"			\
-	"	# mfhi	%0, $ac2		\n"			\
-	"	.word	0x00400810		\n"			\
-	"	move	%0, $1			\n"			\
-	"	.set	pop			\n"			\
-	: "=r" (__treg));						\
-	__treg;								\
-})
-
-#define mfhi3()								\
-({									\
-	unsigned long __treg;						\
-									\
-	__asm__ __volatile__(						\
-	"	.set	push			\n"			\
-	"	.set	noat			\n"			\
-	"	# mfhi	%0, $ac3		\n"			\
-	"	.word	0x00600810		\n"			\
-	"	move	%0, $1			\n"			\
-	"	.set	pop			\n"			\
-	: "=r" (__treg));						\
-	__treg;								\
-})
-
-#define mflo0()								\
-({									\
-	unsigned long __treg;						\
-									\
-	__asm__ __volatile__(						\
-	"	.set	push			\n"			\
-	"	.set	noat			\n"			\
-	"	# mflo	%0, $ac0		\n"			\
-	"	.word	0x00000812		\n"			\
-	"	move	%0, $1			\n"			\
-	"	.set	pop			\n"			\
-	: "=r" (__treg));						\
-	__treg;								\
-})
-
-#define mflo1()								\
-({									\
-	unsigned long __treg;						\
-									\
-	__asm__ __volatile__(						\
-	"	.set	push			\n"			\
-	"	.set	noat			\n"			\
-	"	# mflo	%0, $ac1		\n"			\
-	"	.word	0x00200812		\n"			\
-	"	move	%0, $1			\n"			\
-	"	.set	pop			\n"			\
-	: "=r" (__treg));						\
-	__treg;								\
-})
-
-#define mflo2()								\
-({									\
-	unsigned long __treg;						\
-									\
-	__asm__ __volatile__(						\
-	"	.set	push			\n"			\
-	"	.set	noat			\n"			\
-	"	# mflo	%0, $ac2		\n"			\
-	"	.word	0x00400812		\n"			\
-	"	move	%0, $1			\n"			\
-	"	.set	pop			\n"			\
-	: "=r" (__treg));						\
-	__treg;								\
-})
-
-#define mflo3()								\
-({									\
-	unsigned long __treg;						\
-									\
-	__asm__ __volatile__(						\
-	"	.set	push			\n"			\
-	"	.set	noat			\n"			\
-	"	# mflo	%0, $ac3		\n"			\
-	"	.word	0x00600812		\n"			\
-	"	move	%0, $1			\n"			\
-	"	.set	pop			\n"			\
-	: "=r" (__treg));						\
-	__treg;								\
-})
-
-#define mthi0(x)							\
+#define _dsp_mtxxx(val, ins)						\
 do {									\
 	__asm__ __volatile__(						\
 	"	.set	push					\n"	\
 	"	.set	noat					\n"	\
 	"	move	$1, %0					\n"	\
-	"	# mthi	$1, $ac0				\n"	\
-	"	.word	0x00200011				\n"	\
+	"	.word	(0x00200011 | %1)			\n"	\
 	"	.set	pop					\n"	\
 	:								\
-	: "r" (x));							\
+	: "r" (val), "i" (ins));					\
 } while (0)
 
-#define mthi1(x)							\
-do {									\
-	__asm__ __volatile__(						\
-	"	.set	push					\n"	\
-	"	.set	noat					\n"	\
-	"	move	$1, %0					\n"	\
-	"	# mthi	$1, $ac1				\n"	\
-	"	.word	0x00200811				\n"	\
-	"	.set	pop					\n"	\
-	:								\
-	: "r" (x));							\
-} while (0)
+#define _dsp_mflo(reg) _dsp_mfxxx((reg << 21) | 0x0002)
+#define _dsp_mfhi(reg) _dsp_mfxxx((reg << 21) | 0x0000)
 
-#define mthi2(x)							\
-do {									\
-	__asm__ __volatile__(						\
-	"	.set	push					\n"	\
-	"	.set	noat					\n"	\
-	"	move	$1, %0					\n"	\
-	"	# mthi	$1, $ac2				\n"	\
-	"	.word	0x00201011				\n"	\
-	"	.set	pop					\n"	\
-	:								\
-	: "r" (x));							\
-} while (0)
+#define _dsp_mtlo(val, reg) _dsp_mtxxx(val, ((reg << 11) | 0x0002))
+#define _dsp_mthi(val, reg) _dsp_mtxxx(val, ((reg << 11) | 0x0000))
 
-#define mthi3(x)							\
-do {									\
-	__asm__ __volatile__(						\
-	"	.set	push					\n"	\
-	"	.set	noat					\n"	\
-	"	move	$1, %0					\n"	\
-	"	# mthi	$1, $ac3				\n"	\
-	"	.word	0x00201811				\n"	\
-	"	.set	pop					\n"	\
-	:								\
-	: "r" (x));							\
-} while (0)
+#define mflo0() _dsp_mflo(0)
+#define mflo1() _dsp_mflo(1)
+#define mflo2() _dsp_mflo(2)
+#define mflo3() _dsp_mflo(3)
 
-#define mtlo0(x)							\
-do {									\
-	__asm__ __volatile__(						\
-	"	.set	push					\n"	\
-	"	.set	noat					\n"	\
-	"	move	$1, %0					\n"	\
-	"	# mtlo	$1, $ac0				\n"	\
-	"	.word	0x00200013				\n"	\
-	"	.set	pop					\n"	\
-	:								\
-	: "r" (x));							\
-} while (0)
+#define mfhi0() _dsp_mfhi(0)
+#define mfhi1() _dsp_mfhi(1)
+#define mfhi2() _dsp_mfhi(2)
+#define mfhi3() _dsp_mfhi(3)
 
-#define mtlo1(x)							\
-do {									\
-	__asm__ __volatile__(						\
-	"	.set	push					\n"	\
-	"	.set	noat					\n"	\
-	"	move	$1, %0					\n"	\
-	"	# mtlo	$1, $ac1				\n"	\
-	"	.word	0x00200813				\n"	\
-	"	.set	pop					\n"	\
-	:								\
-	: "r" (x));							\
-} while (0)
+#define mtlo0(x) _dsp_mtlo(x, 0)
+#define mtlo1(x) _dsp_mtlo(x, 1)
+#define mtlo2(x) _dsp_mtlo(x, 2)
+#define mtlo3(x) _dsp_mtlo(x, 3)
 
-#define mtlo2(x)							\
-do {									\
-	__asm__ __volatile__(						\
-	"	.set	push					\n"	\
-	"	.set	noat					\n"	\
-	"	move	$1, %0					\n"	\
-	"	# mtlo	$1, $ac2				\n"	\
-	"	.word	0x00201013				\n"	\
-	"	.set	pop					\n"	\
-	:								\
-	: "r" (x));							\
-} while (0)
+#define mthi0(x) _dsp_mthi(x, 0)
+#define mthi1(x) _dsp_mthi(x, 1)
+#define mthi2(x) _dsp_mthi(x, 2)
+#define mthi3(x) _dsp_mthi(x, 3)
 
-#define mtlo3(x)							\
-do {									\
-	__asm__ __volatile__(						\
-	"	.set	push					\n"	\
-	"	.set	noat					\n"	\
-	"	move	$1, %0					\n"	\
-	"	# mtlo	$1, $ac3				\n"	\
-	"	.word	0x00201813				\n"	\
-	"	.set	pop					\n"	\
-	:								\
-	: "r" (x));							\
-} while (0)
-
+#endif /* CONFIG_CPU_MICROMIPS */
 #endif
 
 /*
diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
index 45cfa1a..e81d719 100644
--- a/arch/mips/include/asm/mmu_context.h
+++ b/arch/mips/include/asm/mmu_context.h
@@ -77,7 +77,7 @@
 #define ASID_INC	0x1
 extern unsigned long smtc_asid_mask;
 #define ASID_MASK	(smtc_asid_mask)
-#define	HW_ASID_MASK	0xff
+#define HW_ASID_MASK	0xff
 /* End SMTC/34K debug hack */
 #else /* FIXME: not correct for R6000 */
 
@@ -140,7 +140,7 @@
 }
 
 static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-                             struct task_struct *tsk)
+			     struct task_struct *tsk)
 {
 	unsigned int cpu = smp_processor_id();
 	unsigned long flags;
@@ -238,7 +238,7 @@
 	}
 	/* See comments for similar code above */
 	write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
-	                 cpu_asid(cpu, next));
+			 cpu_asid(cpu, next));
 	ehb(); /* Make sure it propagates to TCStatus */
 	evpe(mtflags);
 #else
diff --git a/arch/mips/include/asm/msc01_ic.h b/arch/mips/include/asm/msc01_ic.h
index d92406a..ff7f074 100644
--- a/arch/mips/include/asm/msc01_ic.h
+++ b/arch/mips/include/asm/msc01_ic.h
@@ -15,45 +15,45 @@
  * Register offset addresses
  *****************************************************************************/
 
-#define MSC01_IC_RST_OFS     0x00008    /* Software reset              */
-#define MSC01_IC_ENAL_OFS    0x00100    /* Int_in enable mask 31:0     */
-#define MSC01_IC_ENAH_OFS    0x00108    /* Int_in enable mask 63:32    */
-#define MSC01_IC_DISL_OFS    0x00120    /* Int_in disable mask 31:0    */
-#define MSC01_IC_DISH_OFS    0x00128    /* Int_in disable mask 63:32   */
-#define MSC01_IC_ISBL_OFS    0x00140    /* Raw int_in 31:0             */
-#define MSC01_IC_ISBH_OFS    0x00148    /* Raw int_in 63:32            */
-#define MSC01_IC_ISAL_OFS    0x00160    /* Masked int_in 31:0          */
-#define MSC01_IC_ISAH_OFS    0x00168    /* Masked int_in 63:32         */
-#define MSC01_IC_LVL_OFS     0x00180    /* Disable priority int_out    */
-#define MSC01_IC_RAMW_OFS    0x00180    /* Shadow set RAM (EI)	       */
-#define MSC01_IC_OSB_OFS     0x00188    /* Raw int_out                 */
-#define MSC01_IC_OSA_OFS     0x00190    /* Masked int_out              */
-#define MSC01_IC_GENA_OFS    0x00198    /* Global HW int enable        */
-#define MSC01_IC_BASE_OFS    0x001a0    /* Base address of IC_VEC      */
-#define MSC01_IC_VEC_OFS     0x001b0    /* Active int's vector address */
-#define MSC01_IC_EOI_OFS     0x001c0    /* Enable lower level ints     */
-#define MSC01_IC_CFG_OFS     0x001c8    /* Configuration register      */
-#define MSC01_IC_TRLD_OFS    0x001d0    /* Interval timer reload val   */
-#define MSC01_IC_TVAL_OFS    0x001e0    /* Interval timer current val  */
-#define MSC01_IC_TCFG_OFS    0x001f0    /* Interval timer config       */
-#define MSC01_IC_SUP_OFS     0x00200    /* Set up int_in line 0        */
-#define MSC01_IC_ENA_OFS     0x00800    /* Int_in enable mask 63:0     */
-#define MSC01_IC_DIS_OFS     0x00820    /* Int_in disable mask 63:0    */
-#define MSC01_IC_ISB_OFS     0x00840    /* Raw int_in 63:0             */
-#define MSC01_IC_ISA_OFS     0x00860    /* Masked int_in 63:0          */
+#define MSC01_IC_RST_OFS     0x00008	/* Software reset	       */
+#define MSC01_IC_ENAL_OFS    0x00100	/* Int_in enable mask 31:0     */
+#define MSC01_IC_ENAH_OFS    0x00108	/* Int_in enable mask 63:32    */
+#define MSC01_IC_DISL_OFS    0x00120	/* Int_in disable mask 31:0    */
+#define MSC01_IC_DISH_OFS    0x00128	/* Int_in disable mask 63:32   */
+#define MSC01_IC_ISBL_OFS    0x00140	/* Raw int_in 31:0	       */
+#define MSC01_IC_ISBH_OFS    0x00148	/* Raw int_in 63:32	       */
+#define MSC01_IC_ISAL_OFS    0x00160	/* Masked int_in 31:0	       */
+#define MSC01_IC_ISAH_OFS    0x00168	/* Masked int_in 63:32	       */
+#define MSC01_IC_LVL_OFS     0x00180	/* Disable priority int_out    */
+#define MSC01_IC_RAMW_OFS    0x00180	/* Shadow set RAM (EI)	       */
+#define MSC01_IC_OSB_OFS     0x00188	/* Raw int_out		       */
+#define MSC01_IC_OSA_OFS     0x00190	/* Masked int_out	       */
+#define MSC01_IC_GENA_OFS    0x00198	/* Global HW int enable	       */
+#define MSC01_IC_BASE_OFS    0x001a0	/* Base address of IC_VEC      */
+#define MSC01_IC_VEC_OFS     0x001b0	/* Active int's vector address */
+#define MSC01_IC_EOI_OFS     0x001c0	/* Enable lower level ints     */
+#define MSC01_IC_CFG_OFS     0x001c8	/* Configuration register      */
+#define MSC01_IC_TRLD_OFS    0x001d0	/* Interval timer reload val   */
+#define MSC01_IC_TVAL_OFS    0x001e0	/* Interval timer current val  */
+#define MSC01_IC_TCFG_OFS    0x001f0	/* Interval timer config       */
+#define MSC01_IC_SUP_OFS     0x00200	/* Set up int_in line 0	       */
+#define MSC01_IC_ENA_OFS     0x00800	/* Int_in enable mask 63:0     */
+#define MSC01_IC_DIS_OFS     0x00820	/* Int_in disable mask 63:0    */
+#define MSC01_IC_ISB_OFS     0x00840	/* Raw int_in 63:0	       */
+#define MSC01_IC_ISA_OFS     0x00860	/* Masked int_in 63:0	       */
 
 /*****************************************************************************
  * Register field encodings
  *****************************************************************************/
 
-#define MSC01_IC_RST_RST_SHF      0
-#define MSC01_IC_RST_RST_MSK      0x00000001
-#define MSC01_IC_RST_RST_BIT      MSC01_IC_RST_RST_MSK
-#define MSC01_IC_LVL_LVL_SHF      0
-#define MSC01_IC_LVL_LVL_MSK      0x000000ff
-#define MSC01_IC_LVL_SPUR_SHF     16
-#define MSC01_IC_LVL_SPUR_MSK     0x00010000
-#define MSC01_IC_LVL_SPUR_BIT     MSC01_IC_LVL_SPUR_MSK
+#define MSC01_IC_RST_RST_SHF	  0
+#define MSC01_IC_RST_RST_MSK	  0x00000001
+#define MSC01_IC_RST_RST_BIT	  MSC01_IC_RST_RST_MSK
+#define MSC01_IC_LVL_LVL_SHF	  0
+#define MSC01_IC_LVL_LVL_MSK	  0x000000ff
+#define MSC01_IC_LVL_SPUR_SHF	  16
+#define MSC01_IC_LVL_SPUR_MSK	  0x00010000
+#define MSC01_IC_LVL_SPUR_BIT	  MSC01_IC_LVL_SPUR_MSK
 #define MSC01_IC_RAMW_RIPL_SHF	  0
 #define MSC01_IC_RAMW_RIPL_MSK	  0x0000003f
 #define MSC01_IC_RAMW_DATA_SHF	  6
@@ -63,33 +63,33 @@
 #define MSC01_IC_RAMW_READ_SHF	  31
 #define MSC01_IC_RAMW_READ_MSK	  0x80000000
 #define MSC01_IC_RAMW_READ_BIT	  MSC01_IC_RAMW_READ_MSK
-#define MSC01_IC_OSB_OSB_SHF      0
-#define MSC01_IC_OSB_OSB_MSK      0x000000ff
-#define MSC01_IC_OSA_OSA_SHF      0
-#define MSC01_IC_OSA_OSA_MSK      0x000000ff
-#define MSC01_IC_GENA_GENA_SHF    0
-#define MSC01_IC_GENA_GENA_MSK    0x00000001
-#define MSC01_IC_GENA_GENA_BIT    MSC01_IC_GENA_GENA_MSK
-#define MSC01_IC_CFG_DIS_SHF      0
-#define MSC01_IC_CFG_DIS_MSK      0x00000001
-#define MSC01_IC_CFG_DIS_BIT      MSC01_IC_CFG_DIS_MSK
-#define MSC01_IC_CFG_SHFT_SHF     8
-#define MSC01_IC_CFG_SHFT_MSK     0x00000f00
-#define MSC01_IC_TCFG_ENA_SHF     0
-#define MSC01_IC_TCFG_ENA_MSK     0x00000001
-#define MSC01_IC_TCFG_ENA_BIT     MSC01_IC_TCFG_ENA_MSK
-#define MSC01_IC_TCFG_INT_SHF     8
-#define MSC01_IC_TCFG_INT_MSK     0x00000100
-#define MSC01_IC_TCFG_INT_BIT     MSC01_IC_TCFG_INT_MSK
-#define MSC01_IC_TCFG_EDGE_SHF    16
-#define MSC01_IC_TCFG_EDGE_MSK    0x00010000
-#define MSC01_IC_TCFG_EDGE_BIT    MSC01_IC_TCFG_EDGE_MSK
-#define MSC01_IC_SUP_PRI_SHF      0
-#define MSC01_IC_SUP_PRI_MSK      0x00000007
-#define MSC01_IC_SUP_EDGE_SHF     8
-#define MSC01_IC_SUP_EDGE_MSK     0x00000100
-#define MSC01_IC_SUP_EDGE_BIT     MSC01_IC_SUP_EDGE_MSK
-#define MSC01_IC_SUP_STEP         8
+#define MSC01_IC_OSB_OSB_SHF	  0
+#define MSC01_IC_OSB_OSB_MSK	  0x000000ff
+#define MSC01_IC_OSA_OSA_SHF	  0
+#define MSC01_IC_OSA_OSA_MSK	  0x000000ff
+#define MSC01_IC_GENA_GENA_SHF	  0
+#define MSC01_IC_GENA_GENA_MSK	  0x00000001
+#define MSC01_IC_GENA_GENA_BIT	  MSC01_IC_GENA_GENA_MSK
+#define MSC01_IC_CFG_DIS_SHF	  0
+#define MSC01_IC_CFG_DIS_MSK	  0x00000001
+#define MSC01_IC_CFG_DIS_BIT	  MSC01_IC_CFG_DIS_MSK
+#define MSC01_IC_CFG_SHFT_SHF	  8
+#define MSC01_IC_CFG_SHFT_MSK	  0x00000f00
+#define MSC01_IC_TCFG_ENA_SHF	  0
+#define MSC01_IC_TCFG_ENA_MSK	  0x00000001
+#define MSC01_IC_TCFG_ENA_BIT	  MSC01_IC_TCFG_ENA_MSK
+#define MSC01_IC_TCFG_INT_SHF	  8
+#define MSC01_IC_TCFG_INT_MSK	  0x00000100
+#define MSC01_IC_TCFG_INT_BIT	  MSC01_IC_TCFG_INT_MSK
+#define MSC01_IC_TCFG_EDGE_SHF	  16
+#define MSC01_IC_TCFG_EDGE_MSK	  0x00010000
+#define MSC01_IC_TCFG_EDGE_BIT	  MSC01_IC_TCFG_EDGE_MSK
+#define MSC01_IC_SUP_PRI_SHF	  0
+#define MSC01_IC_SUP_PRI_MSK	  0x00000007
+#define MSC01_IC_SUP_EDGE_SHF	  8
+#define MSC01_IC_SUP_EDGE_MSK	  0x00000100
+#define MSC01_IC_SUP_EDGE_BIT	  MSC01_IC_SUP_EDGE_MSK
+#define MSC01_IC_SUP_STEP	  8
 
 /*
  * MIPS System controller interrupt register base.
@@ -100,32 +100,32 @@
  * Absolute register addresses
  *****************************************************************************/
 
-#define MSC01_IC_RST     (MSC01_IC_REG_BASE + MSC01_IC_RST_OFS)
-#define MSC01_IC_ENAL    (MSC01_IC_REG_BASE + MSC01_IC_ENAL_OFS)
-#define MSC01_IC_ENAH    (MSC01_IC_REG_BASE + MSC01_IC_ENAH_OFS)
-#define MSC01_IC_DISL    (MSC01_IC_REG_BASE + MSC01_IC_DISL_OFS)
-#define MSC01_IC_DISH    (MSC01_IC_REG_BASE + MSC01_IC_DISH_OFS)
-#define MSC01_IC_ISBL    (MSC01_IC_REG_BASE + MSC01_IC_ISBL_OFS)
-#define MSC01_IC_ISBH    (MSC01_IC_REG_BASE + MSC01_IC_ISBH_OFS)
-#define MSC01_IC_ISAL    (MSC01_IC_REG_BASE + MSC01_IC_ISAL_OFS)
-#define MSC01_IC_ISAH    (MSC01_IC_REG_BASE + MSC01_IC_ISAH_OFS)
-#define MSC01_IC_LVL     (MSC01_IC_REG_BASE + MSC01_IC_LVL_OFS)
-#define MSC01_IC_RAMW    (MSC01_IC_REG_BASE + MSC01_IC_RAMW_OFS)
-#define MSC01_IC_OSB     (MSC01_IC_REG_BASE + MSC01_IC_OSB_OFS)
-#define MSC01_IC_OSA     (MSC01_IC_REG_BASE + MSC01_IC_OSA_OFS)
-#define MSC01_IC_GENA    (MSC01_IC_REG_BASE + MSC01_IC_GENA_OFS)
-#define MSC01_IC_BASE    (MSC01_IC_REG_BASE + MSC01_IC_BASE_OFS)
-#define MSC01_IC_VEC     (MSC01_IC_REG_BASE + MSC01_IC_VEC_OFS)
-#define MSC01_IC_EOI     (MSC01_IC_REG_BASE + MSC01_IC_EOI_OFS)
-#define MSC01_IC_CFG     (MSC01_IC_REG_BASE + MSC01_IC_CFG_OFS)
-#define MSC01_IC_TRLD    (MSC01_IC_REG_BASE + MSC01_IC_TRLD_OFS)
-#define MSC01_IC_TVAL    (MSC01_IC_REG_BASE + MSC01_IC_TVAL_OFS)
-#define MSC01_IC_TCFG    (MSC01_IC_REG_BASE + MSC01_IC_TCFG_OFS)
-#define MSC01_IC_SUP     (MSC01_IC_REG_BASE + MSC01_IC_SUP_OFS)
-#define MSC01_IC_ENA     (MSC01_IC_REG_BASE + MSC01_IC_ENA_OFS)
-#define MSC01_IC_DIS     (MSC01_IC_REG_BASE + MSC01_IC_DIS_OFS)
-#define MSC01_IC_ISB     (MSC01_IC_REG_BASE + MSC01_IC_ISB_OFS)
-#define MSC01_IC_ISA     (MSC01_IC_REG_BASE + MSC01_IC_ISA_OFS)
+#define MSC01_IC_RST	 (MSC01_IC_REG_BASE + MSC01_IC_RST_OFS)
+#define MSC01_IC_ENAL	 (MSC01_IC_REG_BASE + MSC01_IC_ENAL_OFS)
+#define MSC01_IC_ENAH	 (MSC01_IC_REG_BASE + MSC01_IC_ENAH_OFS)
+#define MSC01_IC_DISL	 (MSC01_IC_REG_BASE + MSC01_IC_DISL_OFS)
+#define MSC01_IC_DISH	 (MSC01_IC_REG_BASE + MSC01_IC_DISH_OFS)
+#define MSC01_IC_ISBL	 (MSC01_IC_REG_BASE + MSC01_IC_ISBL_OFS)
+#define MSC01_IC_ISBH	 (MSC01_IC_REG_BASE + MSC01_IC_ISBH_OFS)
+#define MSC01_IC_ISAL	 (MSC01_IC_REG_BASE + MSC01_IC_ISAL_OFS)
+#define MSC01_IC_ISAH	 (MSC01_IC_REG_BASE + MSC01_IC_ISAH_OFS)
+#define MSC01_IC_LVL	 (MSC01_IC_REG_BASE + MSC01_IC_LVL_OFS)
+#define MSC01_IC_RAMW	 (MSC01_IC_REG_BASE + MSC01_IC_RAMW_OFS)
+#define MSC01_IC_OSB	 (MSC01_IC_REG_BASE + MSC01_IC_OSB_OFS)
+#define MSC01_IC_OSA	 (MSC01_IC_REG_BASE + MSC01_IC_OSA_OFS)
+#define MSC01_IC_GENA	 (MSC01_IC_REG_BASE + MSC01_IC_GENA_OFS)
+#define MSC01_IC_BASE	 (MSC01_IC_REG_BASE + MSC01_IC_BASE_OFS)
+#define MSC01_IC_VEC	 (MSC01_IC_REG_BASE + MSC01_IC_VEC_OFS)
+#define MSC01_IC_EOI	 (MSC01_IC_REG_BASE + MSC01_IC_EOI_OFS)
+#define MSC01_IC_CFG	 (MSC01_IC_REG_BASE + MSC01_IC_CFG_OFS)
+#define MSC01_IC_TRLD	 (MSC01_IC_REG_BASE + MSC01_IC_TRLD_OFS)
+#define MSC01_IC_TVAL	 (MSC01_IC_REG_BASE + MSC01_IC_TVAL_OFS)
+#define MSC01_IC_TCFG	 (MSC01_IC_REG_BASE + MSC01_IC_TCFG_OFS)
+#define MSC01_IC_SUP	 (MSC01_IC_REG_BASE + MSC01_IC_SUP_OFS)
+#define MSC01_IC_ENA	 (MSC01_IC_REG_BASE + MSC01_IC_ENA_OFS)
+#define MSC01_IC_DIS	 (MSC01_IC_REG_BASE + MSC01_IC_DIS_OFS)
+#define MSC01_IC_ISB	 (MSC01_IC_REG_BASE + MSC01_IC_ISB_OFS)
+#define MSC01_IC_ISA	 (MSC01_IC_REG_BASE + MSC01_IC_ISA_OFS)
 
 /*
  * Soc-it interrupts are configurable.
diff --git a/arch/mips/include/asm/netlogic/common.h b/arch/mips/include/asm/netlogic/common.h
index 42bfd5f..aef560a 100644
--- a/arch/mips/include/asm/netlogic/common.h
+++ b/arch/mips/include/asm/netlogic/common.h
@@ -38,11 +38,11 @@
 /*
  * Common SMP definitions
  */
-#define	RESET_VEC_PHYS		0x1fc00000
-#define	RESET_DATA_PHYS		(RESET_VEC_PHYS + (1<<10))
-#define	BOOT_THREAD_MODE	0
-#define	BOOT_NMI_LOCK		4
-#define	BOOT_NMI_HANDLER	8
+#define RESET_VEC_PHYS		0x1fc00000
+#define RESET_DATA_PHYS		(RESET_VEC_PHYS + (1<<10))
+#define BOOT_THREAD_MODE	0
+#define BOOT_NMI_LOCK		4
+#define BOOT_NMI_HANDLER	8
 
 #ifndef __ASSEMBLY__
 #include <linux/cpumask.h>
@@ -80,7 +80,7 @@
 extern cpumask_t nlm_cpumask;
 
 struct nlm_soc_info {
-	unsigned long coremask;	/* cores enabled on the soc */
+	unsigned long coremask; /* cores enabled on the soc */
 	unsigned long ebase;
 	uint64_t irqmask;
 	uint64_t sysbase;	/* only for XLP */
@@ -88,9 +88,9 @@
 	spinlock_t piclock;
 };
 
-#define	nlm_get_node(i)		(&nlm_nodes[i])
+#define nlm_get_node(i)		(&nlm_nodes[i])
 #ifdef CONFIG_CPU_XLR
-#define	nlm_current_node()	(&nlm_nodes[0])
+#define nlm_current_node()	(&nlm_nodes[0])
 #else
 #define nlm_current_node()	(&nlm_nodes[nlm_nodeid()])
 #endif
diff --git a/arch/mips/include/asm/netlogic/haldefs.h b/arch/mips/include/asm/netlogic/haldefs.h
index 72a0c78..419d8ae 100644
--- a/arch/mips/include/asm/netlogic/haldefs.h
+++ b/arch/mips/include/asm/netlogic/haldefs.h
@@ -48,7 +48,7 @@
  * access 64 bit addresses or data.
  *
  * We need to disable interrupts because we save just the lower 32 bits of
- * registers in  interrupt handling. So if we get hit by an interrupt while
+ * registers in	 interrupt handling. So if we get hit by an interrupt while
  * using the upper 32 bits of a register, we lose.
  */
 static inline uint32_t nlm_save_flags_kx(void)
diff --git a/arch/mips/include/asm/netlogic/mips-extns.h b/arch/mips/include/asm/netlogic/mips-extns.h
index 32ba6d9..8ad2e0f 100644
--- a/arch/mips/include/asm/netlogic/mips-extns.h
+++ b/arch/mips/include/asm/netlogic/mips-extns.h
@@ -49,7 +49,7 @@
  */
 #define write_c0_eimr(val)						\
 do {									\
-	if (sizeof(unsigned long) == 4)	{				\
+	if (sizeof(unsigned long) == 4) {				\
 		unsigned long __flags;					\
 									\
 		local_irq_save(__flags);				\
@@ -68,6 +68,85 @@
 		__write_64bit_c0_register($9, 7, (val));		\
 } while (0)
 
+/*
+ * Handling the 64 bit EIMR and EIRR registers in 32-bit mode with
+ * standard functions will be very inefficient. This provides
+ * optimized functions for the normal operations on the registers.
+ *
+ * Call with interrupts disabled.
+ */
+static inline void ack_c0_eirr(int irq)
+{
+	__asm__ __volatile__(
+		".set	push\n\t"
+		".set	mips64\n\t"
+		".set	noat\n\t"
+		"li	$1, 1\n\t"
+		"dsllv	$1, $1, %0\n\t"
+		"dmtc0	$1, $9, 6\n\t"
+		".set	pop"
+		: : "r" (irq));
+}
+
+static inline void set_c0_eimr(int irq)
+{
+	__asm__ __volatile__(
+		".set	push\n\t"
+		".set	mips64\n\t"
+		".set	noat\n\t"
+		"li	$1, 1\n\t"
+		"dsllv	%0, $1, %0\n\t"
+		"dmfc0	$1, $9, 7\n\t"
+		"or	$1, %0\n\t"
+		"dmtc0	$1, $9, 7\n\t"
+		".set	pop"
+		: "+r" (irq));
+}
+
+static inline void clear_c0_eimr(int irq)
+{
+	__asm__ __volatile__(
+		".set	push\n\t"
+		".set	mips64\n\t"
+		".set	noat\n\t"
+		"li	$1, 1\n\t"
+		"dsllv	%0, $1, %0\n\t"
+		"dmfc0	$1, $9, 7\n\t"
+		"or	$1, %0\n\t"
+		"xor	$1, %0\n\t"
+		"dmtc0	$1, $9, 7\n\t"
+		".set	pop"
+		: "+r" (irq));
+}
+
+/*
+ * Read c0 eimr and c0 eirr, do AND of the two values, the result is
+ * the interrupts which are raised and are not masked.
+ */
+static inline uint64_t read_c0_eirr_and_eimr(void)
+{
+	uint64_t val;
+
+#ifdef CONFIG_64BIT
+	val = read_c0_eimr() & read_c0_eirr();
+#else
+	__asm__ __volatile__(
+		".set	push\n\t"
+		".set	mips64\n\t"
+		".set	noat\n\t"
+		"dmfc0	%M0, $9, 6\n\t"
+		"dmfc0	%L0, $9, 7\n\t"
+		"and	%M0, %L0\n\t"
+		"dsll	%L0, %M0, 32\n\t"
+		"dsra	%M0, %M0, 32\n\t"
+		"dsra	%L0, %L0, 32\n\t"
+		".set	pop"
+		: "=r" (val));
+#endif
+
+	return val;
+}
+
 static inline int hard_smp_processor_id(void)
 {
 	return __read_32bit_c0_register($15, 1) & 0x3ff;
@@ -208,7 +287,7 @@
 			".set\tmips0\n\t"				\
 			: : "Jr" (value));				\
 	else								\
-		__asm__ __volatile__(                                   \
+		__asm__ __volatile__(					\
 			".set\tmips32\n\t"				\
 			"mtc2\t%z0, " #reg ", " #sel "\n\t"		\
 			".set\tmips0\n\t"				\
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h
index ca95133..790f0f1 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h
@@ -178,9 +178,9 @@
 
 #define nlm_read_bridge_reg(b, r)	nlm_read_reg(b, r)
 #define nlm_write_bridge_reg(b, r, v)	nlm_write_reg(b, r, v)
-#define	nlm_get_bridge_pcibase(node)	\
+#define nlm_get_bridge_pcibase(node)	\
 			nlm_pcicfg_base(XLP_IO_BRIDGE_OFFSET(node))
-#define	nlm_get_bridge_regbase(node)	\
+#define nlm_get_bridge_regbase(node)	\
 			(nlm_get_bridge_pcibase(node) + XLP_IO_PCI_HDRSZ)
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
index 7b63a6b..6d2e58a 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
@@ -46,6 +46,8 @@
 #define CPU_BLOCKID_FPU		9
 #define CPU_BLOCKID_MAP		10
 
+#define ICU_DEFEATURE		0x100
+
 #define LSU_DEFEATURE		0x304
 #define LSU_DEBUG_ADDR		0x305
 #define LSU_DEBUG_DATA0		0x306
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
index 2c63f97..9fac46f 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
@@ -35,12 +35,12 @@
 #ifndef __NLM_HAL_IOMAP_H__
 #define __NLM_HAL_IOMAP_H__
 
-#define XLP_DEFAULT_IO_BASE             0x18000000
+#define XLP_DEFAULT_IO_BASE		0x18000000
 #define XLP_DEFAULT_PCI_ECFG_BASE	XLP_DEFAULT_IO_BASE
 #define XLP_DEFAULT_PCI_CFG_BASE	0x1c000000
 
 #define NMI_BASE			0xbfc00000
-#define	XLP_IO_CLK			133333333
+#define XLP_IO_CLK			133333333
 
 #define XLP_PCIE_CFG_SIZE		0x1000		/* 4K */
 #define XLP_PCIE_DEV_BLK_SIZE		(8 * XLP_PCIE_CFG_SIZE)
@@ -96,8 +96,8 @@
 #define XLP_IO_NAND_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 7, 1)
 #define XLP_IO_SPI_OFFSET(node)		XLP_HDR_OFFSET(node, 0, 7, 2)
 /* SD flash */
-#define XLP_IO_SD_OFFSET(node)          XLP_HDR_OFFSET(node, 0, 7, 3)
-#define XLP_IO_MMC_OFFSET(node, slot)   \
+#define XLP_IO_SD_OFFSET(node)		XLP_HDR_OFFSET(node, 0, 7, 3)
+#define XLP_IO_MMC_OFFSET(node, slot)	\
 		((XLP_IO_SD_OFFSET(node))+(slot*0x100)+XLP_IO_PCI_HDRSZ)
 
 /* PCI config header register id's */
@@ -125,26 +125,26 @@
 #define XLP_PCI_SBB_WT_REG		0x3f
 
 /* PCI IDs for SoC device */
-#define	PCI_VENDOR_NETLOGIC		0x184e
+#define PCI_VENDOR_NETLOGIC		0x184e
 
-#define	PCI_DEVICE_ID_NLM_ROOT		0x1001
-#define	PCI_DEVICE_ID_NLM_ICI		0x1002
-#define	PCI_DEVICE_ID_NLM_PIC		0x1003
-#define	PCI_DEVICE_ID_NLM_PCIE		0x1004
-#define	PCI_DEVICE_ID_NLM_EHCI		0x1007
-#define	PCI_DEVICE_ID_NLM_OHCI		0x1008
-#define	PCI_DEVICE_ID_NLM_NAE		0x1009
-#define	PCI_DEVICE_ID_NLM_POE		0x100A
-#define	PCI_DEVICE_ID_NLM_FMN		0x100B
-#define	PCI_DEVICE_ID_NLM_RAID		0x100D
-#define	PCI_DEVICE_ID_NLM_SAE		0x100D
-#define	PCI_DEVICE_ID_NLM_RSA		0x100E
-#define	PCI_DEVICE_ID_NLM_CMP		0x100F
-#define	PCI_DEVICE_ID_NLM_UART		0x1010
-#define	PCI_DEVICE_ID_NLM_I2C		0x1011
-#define	PCI_DEVICE_ID_NLM_NOR		0x1015
-#define	PCI_DEVICE_ID_NLM_NAND		0x1016
-#define	PCI_DEVICE_ID_NLM_MMC		0x1018
+#define PCI_DEVICE_ID_NLM_ROOT		0x1001
+#define PCI_DEVICE_ID_NLM_ICI		0x1002
+#define PCI_DEVICE_ID_NLM_PIC		0x1003
+#define PCI_DEVICE_ID_NLM_PCIE		0x1004
+#define PCI_DEVICE_ID_NLM_EHCI		0x1007
+#define PCI_DEVICE_ID_NLM_OHCI		0x1008
+#define PCI_DEVICE_ID_NLM_NAE		0x1009
+#define PCI_DEVICE_ID_NLM_POE		0x100A
+#define PCI_DEVICE_ID_NLM_FMN		0x100B
+#define PCI_DEVICE_ID_NLM_RAID		0x100D
+#define PCI_DEVICE_ID_NLM_SAE		0x100D
+#define PCI_DEVICE_ID_NLM_RSA		0x100E
+#define PCI_DEVICE_ID_NLM_CMP		0x100F
+#define PCI_DEVICE_ID_NLM_UART		0x1010
+#define PCI_DEVICE_ID_NLM_I2C		0x1011
+#define PCI_DEVICE_ID_NLM_NOR		0x1015
+#define PCI_DEVICE_ID_NLM_NAND		0x1016
+#define PCI_DEVICE_ID_NLM_MMC		0x1018
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h b/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h
index 66c323d..b559cb9 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h
@@ -33,42 +33,42 @@
  */
 
 #ifndef __NLM_HAL_PCIBUS_H__
-#define	__NLM_HAL_PCIBUS_H__
+#define __NLM_HAL_PCIBUS_H__
 
 /* PCIE Memory and IO regions */
-#define	PCIE_MEM_BASE			0xd0000000ULL
-#define	PCIE_MEM_LIMIT			0xdfffffffULL
-#define	PCIE_IO_BASE			0x14000000ULL
-#define	PCIE_IO_LIMIT			0x15ffffffULL
+#define PCIE_MEM_BASE			0xd0000000ULL
+#define PCIE_MEM_LIMIT			0xdfffffffULL
+#define PCIE_IO_BASE			0x14000000ULL
+#define PCIE_IO_LIMIT			0x15ffffffULL
 
-#define	PCIE_BRIDGE_CMD			0x1
-#define	PCIE_BRIDGE_MSI_CAP		0x14
-#define	PCIE_BRIDGE_MSI_ADDRL		0x15
-#define	PCIE_BRIDGE_MSI_ADDRH		0x16
-#define	PCIE_BRIDGE_MSI_DATA		0x17
+#define PCIE_BRIDGE_CMD			0x1
+#define PCIE_BRIDGE_MSI_CAP		0x14
+#define PCIE_BRIDGE_MSI_ADDRL		0x15
+#define PCIE_BRIDGE_MSI_ADDRH		0x16
+#define PCIE_BRIDGE_MSI_DATA		0x17
 
 /* XLP Global PCIE configuration space registers */
-#define	PCIE_BYTE_SWAP_MEM_BASE		0x247
-#define	PCIE_BYTE_SWAP_MEM_LIM		0x248
-#define	PCIE_BYTE_SWAP_IO_BASE		0x249
-#define	PCIE_BYTE_SWAP_IO_LIM		0x24A
-#define	PCIE_MSI_STATUS			0x25A
-#define	PCIE_MSI_EN			0x25B
-#define	PCIE_INT_EN0			0x261
+#define PCIE_BYTE_SWAP_MEM_BASE		0x247
+#define PCIE_BYTE_SWAP_MEM_LIM		0x248
+#define PCIE_BYTE_SWAP_IO_BASE		0x249
+#define PCIE_BYTE_SWAP_IO_LIM		0x24A
+#define PCIE_MSI_STATUS			0x25A
+#define PCIE_MSI_EN			0x25B
+#define PCIE_INT_EN0			0x261
 
 /* PCIE_MSI_EN */
-#define	PCIE_MSI_VECTOR_INT_EN		0xFFFFFFFF
+#define PCIE_MSI_VECTOR_INT_EN		0xFFFFFFFF
 
 /* PCIE_INT_EN0 */
-#define	PCIE_MSI_INT_EN			(1 << 9)
+#define PCIE_MSI_INT_EN			(1 << 9)
 
 #ifndef __ASSEMBLY__
 
-#define	nlm_read_pcie_reg(b, r)		nlm_read_reg(b, r)
-#define	nlm_write_pcie_reg(b, r, v)	nlm_write_reg(b, r, v)
-#define	nlm_get_pcie_base(node, inst)	\
+#define nlm_read_pcie_reg(b, r)		nlm_read_reg(b, r)
+#define nlm_write_pcie_reg(b, r, v)	nlm_write_reg(b, r, v)
+#define nlm_get_pcie_base(node, inst)	\
 			nlm_pcicfg_base(XLP_IO_PCIE_OFFSET(node, inst))
-#define	nlm_get_pcie_regbase(node, inst)	\
+#define nlm_get_pcie_regbase(node, inst)	\
 			(nlm_get_pcie_base(node, inst) + XLP_IO_PCI_HDRSZ)
 
 int xlp_pcie_link_irt(int link);
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pic.h b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
index b2e53a5..3df5301 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/pic.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
@@ -36,7 +36,7 @@
 #define _NLM_HAL_PIC_H
 
 /* PIC Specific registers */
-#define PIC_CTRL                0x00
+#define PIC_CTRL		0x00
 
 /* PIC control register defines */
 #define PIC_CTRL_ITV		32 /* interrupt timeout value */
@@ -71,41 +71,41 @@
 #define PIC_IRT_DB		16 /* Destination base */
 #define PIC_IRT_DTE		0  /* Destination thread enables */
 
-#define PIC_BYTESWAP            0x02
-#define PIC_STATUS              0x04
+#define PIC_BYTESWAP		0x02
+#define PIC_STATUS		0x04
 #define PIC_INTR_TIMEOUT	0x06
 #define PIC_ICI0_INTR_TIMEOUT	0x08
 #define PIC_ICI1_INTR_TIMEOUT	0x0a
 #define PIC_ICI2_INTR_TIMEOUT	0x0c
 #define PIC_IPI_CTL		0x0e
-#define PIC_INT_ACK             0x10
-#define PIC_INT_PENDING0        0x12
-#define PIC_INT_PENDING1        0x14
-#define PIC_INT_PENDING2        0x16
+#define PIC_INT_ACK		0x10
+#define PIC_INT_PENDING0	0x12
+#define PIC_INT_PENDING1	0x14
+#define PIC_INT_PENDING2	0x16
 
-#define PIC_WDOG0_MAXVAL        0x18
-#define PIC_WDOG0_COUNT         0x1a
-#define PIC_WDOG0_ENABLE0       0x1c
-#define PIC_WDOG0_ENABLE1       0x1e
-#define PIC_WDOG0_BEATCMD       0x20
-#define PIC_WDOG0_BEAT0         0x22
-#define PIC_WDOG0_BEAT1         0x24
+#define PIC_WDOG0_MAXVAL	0x18
+#define PIC_WDOG0_COUNT		0x1a
+#define PIC_WDOG0_ENABLE0	0x1c
+#define PIC_WDOG0_ENABLE1	0x1e
+#define PIC_WDOG0_BEATCMD	0x20
+#define PIC_WDOG0_BEAT0		0x22
+#define PIC_WDOG0_BEAT1		0x24
 
-#define PIC_WDOG1_MAXVAL        0x26
-#define PIC_WDOG1_COUNT         0x28
-#define PIC_WDOG1_ENABLE0       0x2a
-#define PIC_WDOG1_ENABLE1       0x2c
-#define PIC_WDOG1_BEATCMD       0x2e
-#define PIC_WDOG1_BEAT0         0x30
-#define PIC_WDOG1_BEAT1         0x32
+#define PIC_WDOG1_MAXVAL	0x26
+#define PIC_WDOG1_COUNT		0x28
+#define PIC_WDOG1_ENABLE0	0x2a
+#define PIC_WDOG1_ENABLE1	0x2c
+#define PIC_WDOG1_BEATCMD	0x2e
+#define PIC_WDOG1_BEAT0		0x30
+#define PIC_WDOG1_BEAT1		0x32
 
-#define PIC_WDOG_MAXVAL(i)      (PIC_WDOG0_MAXVAL + ((i) ? 7 : 0))
-#define PIC_WDOG_COUNT(i)       (PIC_WDOG0_COUNT + ((i) ? 7 : 0))
-#define PIC_WDOG_ENABLE0(i)     (PIC_WDOG0_ENABLE0 + ((i) ? 7 : 0))
-#define PIC_WDOG_ENABLE1(i)     (PIC_WDOG0_ENABLE1 + ((i) ? 7 : 0))
-#define PIC_WDOG_BEATCMD(i)     (PIC_WDOG0_BEATCMD + ((i) ? 7 : 0))
-#define PIC_WDOG_BEAT0(i)       (PIC_WDOG0_BEAT0 + ((i) ? 7 : 0))
-#define PIC_WDOG_BEAT1(i)       (PIC_WDOG0_BEAT1 + ((i) ? 7 : 0))
+#define PIC_WDOG_MAXVAL(i)	(PIC_WDOG0_MAXVAL + ((i) ? 7 : 0))
+#define PIC_WDOG_COUNT(i)	(PIC_WDOG0_COUNT + ((i) ? 7 : 0))
+#define PIC_WDOG_ENABLE0(i)	(PIC_WDOG0_ENABLE0 + ((i) ? 7 : 0))
+#define PIC_WDOG_ENABLE1(i)	(PIC_WDOG0_ENABLE1 + ((i) ? 7 : 0))
+#define PIC_WDOG_BEATCMD(i)	(PIC_WDOG0_BEATCMD + ((i) ? 7 : 0))
+#define PIC_WDOG_BEAT0(i)	(PIC_WDOG0_BEAT0 + ((i) ? 7 : 0))
+#define PIC_WDOG_BEAT1(i)	(PIC_WDOG0_BEAT1 + ((i) ? 7 : 0))
 
 #define PIC_TIMER0_MAXVAL    0x34
 #define PIC_TIMER1_MAXVAL    0x36
@@ -127,28 +127,28 @@
 #define PIC_TIMER7_COUNT     0x52
 #define PIC_TIMER_COUNT(i)   (PIC_TIMER0_COUNT + ((i) * 2))
 
-#define PIC_ITE0_N0_N1          0x54
-#define PIC_ITE1_N0_N1          0x58
-#define PIC_ITE2_N0_N1          0x5c
-#define PIC_ITE3_N0_N1          0x60
-#define PIC_ITE4_N0_N1          0x64
-#define PIC_ITE5_N0_N1          0x68
-#define PIC_ITE6_N0_N1          0x6c
-#define PIC_ITE7_N0_N1          0x70
-#define PIC_ITE_N0_N1(i)        (PIC_ITE0_N0_N1 + ((i) * 4))
+#define PIC_ITE0_N0_N1		0x54
+#define PIC_ITE1_N0_N1		0x58
+#define PIC_ITE2_N0_N1		0x5c
+#define PIC_ITE3_N0_N1		0x60
+#define PIC_ITE4_N0_N1		0x64
+#define PIC_ITE5_N0_N1		0x68
+#define PIC_ITE6_N0_N1		0x6c
+#define PIC_ITE7_N0_N1		0x70
+#define PIC_ITE_N0_N1(i)	(PIC_ITE0_N0_N1 + ((i) * 4))
 
-#define PIC_ITE0_N2_N3          0x56
-#define PIC_ITE1_N2_N3          0x5a
-#define PIC_ITE2_N2_N3          0x5e
-#define PIC_ITE3_N2_N3          0x62
-#define PIC_ITE4_N2_N3          0x66
-#define PIC_ITE5_N2_N3          0x6a
-#define PIC_ITE6_N2_N3          0x6e
-#define PIC_ITE7_N2_N3          0x72
-#define PIC_ITE_N2_N3(i)        (PIC_ITE0_N2_N3 + ((i) * 4))
+#define PIC_ITE0_N2_N3		0x56
+#define PIC_ITE1_N2_N3		0x5a
+#define PIC_ITE2_N2_N3		0x5e
+#define PIC_ITE3_N2_N3		0x62
+#define PIC_ITE4_N2_N3		0x66
+#define PIC_ITE5_N2_N3		0x6a
+#define PIC_ITE6_N2_N3		0x6e
+#define PIC_ITE7_N2_N3		0x72
+#define PIC_ITE_N2_N3(i)	(PIC_ITE0_N2_N3 + ((i) * 4))
 
-#define PIC_IRT0                0x74
-#define PIC_IRT(i)              (PIC_IRT0 + ((i) * 2))
+#define PIC_IRT0		0x74
+#define PIC_IRT(i)		(PIC_IRT0 + ((i) * 2))
 
 #define TIMER_CYCLES_MAXVAL	0xffffffffffffffffULL
 
@@ -261,6 +261,8 @@
 #define PIC_LOCAL_SCHEDULING		1
 #define PIC_GLOBAL_SCHEDULING		0
 
+#define PIC_CLK_HZ			133333333
+
 #define nlm_read_pic_reg(b, r)	nlm_read_reg64(b, r)
 #define nlm_write_pic_reg(b, r, v) nlm_write_reg64(b, r, v)
 #define nlm_get_pic_pcibase(node) nlm_pcicfg_base(XLP_IO_PIC_OFFSET(node))
@@ -315,6 +317,12 @@
 	return nlm_read_pic_reg(base, PIC_TIMER_COUNT(timer));
 }
 
+static inline uint32_t
+nlm_pic_read_timer32(uint64_t base, int timer)
+{
+	return (uint32_t)nlm_read_pic_reg(base, PIC_TIMER_COUNT(timer));
+}
+
 static inline void
 nlm_pic_write_timer(uint64_t base, int timer, uint64_t value)
 {
@@ -376,9 +384,9 @@
 }
 
 static inline void
-nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt)
+nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt, int en)
 {
-	nlm_pic_write_irt_direct(base, irt, 0, 0, 0, irq, hwt);
+	nlm_pic_write_irt_direct(base, irt, en, 0, 0, irq, hwt);
 }
 
 int nlm_irq_to_irt(int irq);
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/sys.h b/arch/mips/include/asm/netlogic/xlp-hal/sys.h
index 258e8cc..470e52b 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/sys.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/sys.h
@@ -40,89 +40,89 @@
 * @author Netlogic Microsystems
 * @brief HAL for System configuration registers
 */
-#define	SYS_CHIP_RESET				0x00
-#define	SYS_POWER_ON_RESET_CFG			0x01
-#define	SYS_EFUSE_DEVICE_CFG_STATUS0		0x02
-#define	SYS_EFUSE_DEVICE_CFG_STATUS1		0x03
-#define	SYS_EFUSE_DEVICE_CFG_STATUS2		0x04
-#define	SYS_EFUSE_DEVICE_CFG3			0x05
-#define	SYS_EFUSE_DEVICE_CFG4			0x06
-#define	SYS_EFUSE_DEVICE_CFG5			0x07
-#define	SYS_EFUSE_DEVICE_CFG6			0x08
-#define	SYS_EFUSE_DEVICE_CFG7			0x09
-#define	SYS_PLL_CTRL				0x0a
-#define	SYS_CPU_RESET				0x0b
-#define	SYS_CPU_NONCOHERENT_MODE		0x0d
-#define	SYS_CORE_DFS_DIS_CTRL			0x0e
-#define	SYS_CORE_DFS_RST_CTRL			0x0f
-#define	SYS_CORE_DFS_BYP_CTRL			0x10
-#define	SYS_CORE_DFS_PHA_CTRL			0x11
-#define	SYS_CORE_DFS_DIV_INC_CTRL		0x12
-#define	SYS_CORE_DFS_DIV_DEC_CTRL		0x13
-#define	SYS_CORE_DFS_DIV_VALUE			0x14
-#define	SYS_RESET				0x15
-#define	SYS_DFS_DIS_CTRL			0x16
-#define	SYS_DFS_RST_CTRL			0x17
-#define	SYS_DFS_BYP_CTRL			0x18
-#define	SYS_DFS_DIV_INC_CTRL			0x19
-#define	SYS_DFS_DIV_DEC_CTRL			0x1a
-#define	SYS_DFS_DIV_VALUE0			0x1b
-#define	SYS_DFS_DIV_VALUE1			0x1c
-#define	SYS_SENSE_AMP_DLY			0x1d
-#define	SYS_SOC_SENSE_AMP_DLY			0x1e
-#define	SYS_CTRL0				0x1f
-#define	SYS_CTRL1				0x20
-#define	SYS_TIMEOUT_BS1				0x21
-#define	SYS_BYTE_SWAP				0x22
-#define	SYS_VRM_VID				0x23
-#define	SYS_PWR_RAM_CMD				0x24
-#define	SYS_PWR_RAM_ADDR			0x25
-#define	SYS_PWR_RAM_DATA0			0x26
-#define	SYS_PWR_RAM_DATA1			0x27
-#define	SYS_PWR_RAM_DATA2			0x28
-#define	SYS_PWR_UCODE				0x29
-#define	SYS_CPU0_PWR_STATUS			0x2a
-#define	SYS_CPU1_PWR_STATUS			0x2b
-#define	SYS_CPU2_PWR_STATUS			0x2c
-#define	SYS_CPU3_PWR_STATUS			0x2d
-#define	SYS_CPU4_PWR_STATUS			0x2e
-#define	SYS_CPU5_PWR_STATUS			0x2f
-#define	SYS_CPU6_PWR_STATUS			0x30
-#define	SYS_CPU7_PWR_STATUS			0x31
-#define	SYS_STATUS				0x32
-#define	SYS_INT_POL				0x33
-#define	SYS_INT_TYPE				0x34
-#define	SYS_INT_STATUS				0x35
-#define	SYS_INT_MASK0				0x36
-#define	SYS_INT_MASK1				0x37
-#define	SYS_UCO_S_ECC				0x38
-#define	SYS_UCO_M_ECC				0x39
-#define	SYS_UCO_ADDR				0x3a
-#define	SYS_UCO_INSTR				0x3b
-#define	SYS_MEM_BIST0				0x3c
-#define	SYS_MEM_BIST1				0x3d
-#define	SYS_MEM_BIST2				0x3e
-#define	SYS_MEM_BIST3				0x3f
-#define	SYS_MEM_BIST4				0x40
-#define	SYS_MEM_BIST5				0x41
-#define	SYS_MEM_BIST6				0x42
-#define	SYS_MEM_BIST7				0x43
-#define	SYS_MEM_BIST8				0x44
-#define	SYS_MEM_BIST9				0x45
-#define	SYS_MEM_BIST10				0x46
-#define	SYS_MEM_BIST11				0x47
-#define	SYS_MEM_BIST12				0x48
-#define	SYS_SCRTCH0				0x49
-#define	SYS_SCRTCH1				0x4a
-#define	SYS_SCRTCH2				0x4b
-#define	SYS_SCRTCH3				0x4c
+#define SYS_CHIP_RESET				0x00
+#define SYS_POWER_ON_RESET_CFG			0x01
+#define SYS_EFUSE_DEVICE_CFG_STATUS0		0x02
+#define SYS_EFUSE_DEVICE_CFG_STATUS1		0x03
+#define SYS_EFUSE_DEVICE_CFG_STATUS2		0x04
+#define SYS_EFUSE_DEVICE_CFG3			0x05
+#define SYS_EFUSE_DEVICE_CFG4			0x06
+#define SYS_EFUSE_DEVICE_CFG5			0x07
+#define SYS_EFUSE_DEVICE_CFG6			0x08
+#define SYS_EFUSE_DEVICE_CFG7			0x09
+#define SYS_PLL_CTRL				0x0a
+#define SYS_CPU_RESET				0x0b
+#define SYS_CPU_NONCOHERENT_MODE		0x0d
+#define SYS_CORE_DFS_DIS_CTRL			0x0e
+#define SYS_CORE_DFS_RST_CTRL			0x0f
+#define SYS_CORE_DFS_BYP_CTRL			0x10
+#define SYS_CORE_DFS_PHA_CTRL			0x11
+#define SYS_CORE_DFS_DIV_INC_CTRL		0x12
+#define SYS_CORE_DFS_DIV_DEC_CTRL		0x13
+#define SYS_CORE_DFS_DIV_VALUE			0x14
+#define SYS_RESET				0x15
+#define SYS_DFS_DIS_CTRL			0x16
+#define SYS_DFS_RST_CTRL			0x17
+#define SYS_DFS_BYP_CTRL			0x18
+#define SYS_DFS_DIV_INC_CTRL			0x19
+#define SYS_DFS_DIV_DEC_CTRL			0x1a
+#define SYS_DFS_DIV_VALUE0			0x1b
+#define SYS_DFS_DIV_VALUE1			0x1c
+#define SYS_SENSE_AMP_DLY			0x1d
+#define SYS_SOC_SENSE_AMP_DLY			0x1e
+#define SYS_CTRL0				0x1f
+#define SYS_CTRL1				0x20
+#define SYS_TIMEOUT_BS1				0x21
+#define SYS_BYTE_SWAP				0x22
+#define SYS_VRM_VID				0x23
+#define SYS_PWR_RAM_CMD				0x24
+#define SYS_PWR_RAM_ADDR			0x25
+#define SYS_PWR_RAM_DATA0			0x26
+#define SYS_PWR_RAM_DATA1			0x27
+#define SYS_PWR_RAM_DATA2			0x28
+#define SYS_PWR_UCODE				0x29
+#define SYS_CPU0_PWR_STATUS			0x2a
+#define SYS_CPU1_PWR_STATUS			0x2b
+#define SYS_CPU2_PWR_STATUS			0x2c
+#define SYS_CPU3_PWR_STATUS			0x2d
+#define SYS_CPU4_PWR_STATUS			0x2e
+#define SYS_CPU5_PWR_STATUS			0x2f
+#define SYS_CPU6_PWR_STATUS			0x30
+#define SYS_CPU7_PWR_STATUS			0x31
+#define SYS_STATUS				0x32
+#define SYS_INT_POL				0x33
+#define SYS_INT_TYPE				0x34
+#define SYS_INT_STATUS				0x35
+#define SYS_INT_MASK0				0x36
+#define SYS_INT_MASK1				0x37
+#define SYS_UCO_S_ECC				0x38
+#define SYS_UCO_M_ECC				0x39
+#define SYS_UCO_ADDR				0x3a
+#define SYS_UCO_INSTR				0x3b
+#define SYS_MEM_BIST0				0x3c
+#define SYS_MEM_BIST1				0x3d
+#define SYS_MEM_BIST2				0x3e
+#define SYS_MEM_BIST3				0x3f
+#define SYS_MEM_BIST4				0x40
+#define SYS_MEM_BIST5				0x41
+#define SYS_MEM_BIST6				0x42
+#define SYS_MEM_BIST7				0x43
+#define SYS_MEM_BIST8				0x44
+#define SYS_MEM_BIST9				0x45
+#define SYS_MEM_BIST10				0x46
+#define SYS_MEM_BIST11				0x47
+#define SYS_MEM_BIST12				0x48
+#define SYS_SCRTCH0				0x49
+#define SYS_SCRTCH1				0x4a
+#define SYS_SCRTCH2				0x4b
+#define SYS_SCRTCH3				0x4c
 
 #ifndef __ASSEMBLY__
 
-#define	nlm_read_sys_reg(b, r)		nlm_read_reg(b, r)
-#define	nlm_write_sys_reg(b, r, v)	nlm_write_reg(b, r, v)
-#define	nlm_get_sys_pcibase(node) nlm_pcicfg_base(XLP_IO_SYS_OFFSET(node))
-#define	nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ)
+#define nlm_read_sys_reg(b, r)		nlm_read_reg(b, r)
+#define nlm_write_sys_reg(b, r, v)	nlm_write_reg(b, r, v)
+#define nlm_get_sys_pcibase(node) nlm_pcicfg_base(XLP_IO_SYS_OFFSET(node))
+#define nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ)
 
 #endif
 #endif
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/uart.h b/arch/mips/include/asm/netlogic/xlp-hal/uart.h
index 6a7046c..86d16e1 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/uart.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/uart.h
@@ -91,8 +91,8 @@
 
 #if !defined(LOCORE) && !defined(__ASSEMBLY__)
 
-#define	nlm_read_uart_reg(b, r)		nlm_read_reg(b, r)
-#define	nlm_write_uart_reg(b, r, v)	nlm_write_reg(b, r, v)
+#define nlm_read_uart_reg(b, r)		nlm_read_reg(b, r)
+#define nlm_write_uart_reg(b, r, v)	nlm_write_reg(b, r, v)
 #define nlm_get_uart_pcibase(node, inst)	\
 		nlm_pcicfg_base(XLP_IO_UART_OFFSET(node, inst))
 #define nlm_get_uart_regbase(node, inst)	\
diff --git a/arch/mips/include/asm/netlogic/xlr/fmn.h b/arch/mips/include/asm/netlogic/xlr/fmn.h
index 68d5167..2a78929 100644
--- a/arch/mips/include/asm/netlogic/xlr/fmn.h
+++ b/arch/mips/include/asm/netlogic/xlr/fmn.h
@@ -38,108 +38,108 @@
 #include <asm/netlogic/mips-extns.h> /* for COP2 access */
 
 /* Station IDs */
-#define	FMN_STNID_CPU0			0x00
-#define	FMN_STNID_CPU1			0x08
-#define	FMN_STNID_CPU2			0x10
-#define	FMN_STNID_CPU3			0x18
-#define	FMN_STNID_CPU4			0x20
-#define	FMN_STNID_CPU5			0x28
-#define	FMN_STNID_CPU6			0x30
-#define	FMN_STNID_CPU7			0x38
+#define FMN_STNID_CPU0			0x00
+#define FMN_STNID_CPU1			0x08
+#define FMN_STNID_CPU2			0x10
+#define FMN_STNID_CPU3			0x18
+#define FMN_STNID_CPU4			0x20
+#define FMN_STNID_CPU5			0x28
+#define FMN_STNID_CPU6			0x30
+#define FMN_STNID_CPU7			0x38
 
-#define	FMN_STNID_XGS0_TX		64
-#define	FMN_STNID_XMAC0_00_TX		64
-#define	FMN_STNID_XMAC0_01_TX		65
-#define	FMN_STNID_XMAC0_02_TX		66
-#define	FMN_STNID_XMAC0_03_TX		67
-#define	FMN_STNID_XMAC0_04_TX		68
-#define	FMN_STNID_XMAC0_05_TX		69
-#define	FMN_STNID_XMAC0_06_TX		70
-#define	FMN_STNID_XMAC0_07_TX		71
-#define	FMN_STNID_XMAC0_08_TX		72
-#define	FMN_STNID_XMAC0_09_TX		73
-#define	FMN_STNID_XMAC0_10_TX		74
-#define	FMN_STNID_XMAC0_11_TX		75
-#define	FMN_STNID_XMAC0_12_TX		76
-#define	FMN_STNID_XMAC0_13_TX		77
-#define	FMN_STNID_XMAC0_14_TX		78
-#define	FMN_STNID_XMAC0_15_TX		79
+#define FMN_STNID_XGS0_TX		64
+#define FMN_STNID_XMAC0_00_TX		64
+#define FMN_STNID_XMAC0_01_TX		65
+#define FMN_STNID_XMAC0_02_TX		66
+#define FMN_STNID_XMAC0_03_TX		67
+#define FMN_STNID_XMAC0_04_TX		68
+#define FMN_STNID_XMAC0_05_TX		69
+#define FMN_STNID_XMAC0_06_TX		70
+#define FMN_STNID_XMAC0_07_TX		71
+#define FMN_STNID_XMAC0_08_TX		72
+#define FMN_STNID_XMAC0_09_TX		73
+#define FMN_STNID_XMAC0_10_TX		74
+#define FMN_STNID_XMAC0_11_TX		75
+#define FMN_STNID_XMAC0_12_TX		76
+#define FMN_STNID_XMAC0_13_TX		77
+#define FMN_STNID_XMAC0_14_TX		78
+#define FMN_STNID_XMAC0_15_TX		79
 
-#define	FMN_STNID_XGS1_TX		80
-#define	FMN_STNID_XMAC1_00_TX		80
-#define	FMN_STNID_XMAC1_01_TX		81
-#define	FMN_STNID_XMAC1_02_TX		82
-#define	FMN_STNID_XMAC1_03_TX		83
-#define	FMN_STNID_XMAC1_04_TX		84
-#define	FMN_STNID_XMAC1_05_TX		85
-#define	FMN_STNID_XMAC1_06_TX		86
-#define	FMN_STNID_XMAC1_07_TX		87
-#define	FMN_STNID_XMAC1_08_TX		88
-#define	FMN_STNID_XMAC1_09_TX		89
-#define	FMN_STNID_XMAC1_10_TX		90
-#define	FMN_STNID_XMAC1_11_TX		91
-#define	FMN_STNID_XMAC1_12_TX		92
-#define	FMN_STNID_XMAC1_13_TX		93
-#define	FMN_STNID_XMAC1_14_TX		94
-#define	FMN_STNID_XMAC1_15_TX		95
+#define FMN_STNID_XGS1_TX		80
+#define FMN_STNID_XMAC1_00_TX		80
+#define FMN_STNID_XMAC1_01_TX		81
+#define FMN_STNID_XMAC1_02_TX		82
+#define FMN_STNID_XMAC1_03_TX		83
+#define FMN_STNID_XMAC1_04_TX		84
+#define FMN_STNID_XMAC1_05_TX		85
+#define FMN_STNID_XMAC1_06_TX		86
+#define FMN_STNID_XMAC1_07_TX		87
+#define FMN_STNID_XMAC1_08_TX		88
+#define FMN_STNID_XMAC1_09_TX		89
+#define FMN_STNID_XMAC1_10_TX		90
+#define FMN_STNID_XMAC1_11_TX		91
+#define FMN_STNID_XMAC1_12_TX		92
+#define FMN_STNID_XMAC1_13_TX		93
+#define FMN_STNID_XMAC1_14_TX		94
+#define FMN_STNID_XMAC1_15_TX		95
 
-#define	FMN_STNID_GMAC			96
-#define	FMN_STNID_GMACJFR_0		96
-#define	FMN_STNID_GMACRFR_0		97
-#define	FMN_STNID_GMACTX0		98
-#define	FMN_STNID_GMACTX1		99
-#define	FMN_STNID_GMACTX2		100
-#define	FMN_STNID_GMACTX3		101
-#define	FMN_STNID_GMACJFR_1		102
-#define	FMN_STNID_GMACRFR_1		103
+#define FMN_STNID_GMAC			96
+#define FMN_STNID_GMACJFR_0		96
+#define FMN_STNID_GMACRFR_0		97
+#define FMN_STNID_GMACTX0		98
+#define FMN_STNID_GMACTX1		99
+#define FMN_STNID_GMACTX2		100
+#define FMN_STNID_GMACTX3		101
+#define FMN_STNID_GMACJFR_1		102
+#define FMN_STNID_GMACRFR_1		103
 
-#define	FMN_STNID_DMA			104
-#define	FMN_STNID_DMA_0			104
-#define	FMN_STNID_DMA_1			105
-#define	FMN_STNID_DMA_2			106
-#define	FMN_STNID_DMA_3			107
+#define FMN_STNID_DMA			104
+#define FMN_STNID_DMA_0			104
+#define FMN_STNID_DMA_1			105
+#define FMN_STNID_DMA_2			106
+#define FMN_STNID_DMA_3			107
 
-#define	FMN_STNID_XGS0FR		112
-#define	FMN_STNID_XMAC0JFR		112
-#define	FMN_STNID_XMAC0RFR		113
+#define FMN_STNID_XGS0FR		112
+#define FMN_STNID_XMAC0JFR		112
+#define FMN_STNID_XMAC0RFR		113
 
-#define	FMN_STNID_XGS1FR		114
-#define	FMN_STNID_XMAC1JFR		114
-#define	FMN_STNID_XMAC1RFR		115
-#define	FMN_STNID_SEC			120
-#define	FMN_STNID_SEC0			120
-#define	FMN_STNID_SEC1			121
-#define	FMN_STNID_SEC2			122
-#define	FMN_STNID_SEC3			123
-#define	FMN_STNID_PK0			124
-#define	FMN_STNID_SEC_RSA		124
-#define	FMN_STNID_SEC_RSVD0		125
-#define	FMN_STNID_SEC_RSVD1		126
-#define	FMN_STNID_SEC_RSVD2		127
+#define FMN_STNID_XGS1FR		114
+#define FMN_STNID_XMAC1JFR		114
+#define FMN_STNID_XMAC1RFR		115
+#define FMN_STNID_SEC			120
+#define FMN_STNID_SEC0			120
+#define FMN_STNID_SEC1			121
+#define FMN_STNID_SEC2			122
+#define FMN_STNID_SEC3			123
+#define FMN_STNID_PK0			124
+#define FMN_STNID_SEC_RSA		124
+#define FMN_STNID_SEC_RSVD0		125
+#define FMN_STNID_SEC_RSVD1		126
+#define FMN_STNID_SEC_RSVD2		127
 
-#define	FMN_STNID_GMAC1			80
-#define	FMN_STNID_GMAC1_FR_0		81
-#define	FMN_STNID_GMAC1_TX0		82
-#define	FMN_STNID_GMAC1_TX1		83
-#define	FMN_STNID_GMAC1_TX2		84
-#define	FMN_STNID_GMAC1_TX3		85
-#define	FMN_STNID_GMAC1_FR_1		87
-#define	FMN_STNID_GMAC0			96
-#define	FMN_STNID_GMAC0_FR_0		97
-#define	FMN_STNID_GMAC0_TX0		98
-#define	FMN_STNID_GMAC0_TX1		99
-#define	FMN_STNID_GMAC0_TX2		100
-#define	FMN_STNID_GMAC0_TX3		101
-#define	FMN_STNID_GMAC0_FR_1		103
-#define	FMN_STNID_CMP_0			108
-#define	FMN_STNID_CMP_1			109
-#define	FMN_STNID_CMP_2			110
-#define	FMN_STNID_CMP_3			111
-#define	FMN_STNID_PCIE_0		116
-#define	FMN_STNID_PCIE_1		117
-#define	FMN_STNID_PCIE_2		118
-#define	FMN_STNID_PCIE_3		119
-#define	FMN_STNID_XLS_PK0		121
+#define FMN_STNID_GMAC1			80
+#define FMN_STNID_GMAC1_FR_0		81
+#define FMN_STNID_GMAC1_TX0		82
+#define FMN_STNID_GMAC1_TX1		83
+#define FMN_STNID_GMAC1_TX2		84
+#define FMN_STNID_GMAC1_TX3		85
+#define FMN_STNID_GMAC1_FR_1		87
+#define FMN_STNID_GMAC0			96
+#define FMN_STNID_GMAC0_FR_0		97
+#define FMN_STNID_GMAC0_TX0		98
+#define FMN_STNID_GMAC0_TX1		99
+#define FMN_STNID_GMAC0_TX2		100
+#define FMN_STNID_GMAC0_TX3		101
+#define FMN_STNID_GMAC0_FR_1		103
+#define FMN_STNID_CMP_0			108
+#define FMN_STNID_CMP_1			109
+#define FMN_STNID_CMP_2			110
+#define FMN_STNID_CMP_3			111
+#define FMN_STNID_PCIE_0		116
+#define FMN_STNID_PCIE_1		117
+#define FMN_STNID_PCIE_2		118
+#define FMN_STNID_PCIE_3		119
+#define FMN_STNID_XLS_PK0		121
 
 #define nlm_read_c2_cc0(s)		__read_32bit_c2_register($16, s)
 #define nlm_read_c2_cc1(s)		__read_32bit_c2_register($17, s)
@@ -175,25 +175,25 @@
 #define nlm_write_c2_cc14(s, v)		__write_32bit_c2_register($30, s, v)
 #define nlm_write_c2_cc15(s, v)		__write_32bit_c2_register($31, s, v)
 
-#define	nlm_read_c2_status(sel)		__read_32bit_c2_register($2, 0)
-#define	nlm_read_c2_config()		__read_32bit_c2_register($3, 0)
-#define	nlm_write_c2_config(v)		__write_32bit_c2_register($3, 0, v)
-#define	nlm_read_c2_bucksize(b)		__read_32bit_c2_register($4, b)
-#define	nlm_write_c2_bucksize(b, v)	__write_32bit_c2_register($4, b, v)
+#define nlm_read_c2_status(sel)		__read_32bit_c2_register($2, 0)
+#define nlm_read_c2_config()		__read_32bit_c2_register($3, 0)
+#define nlm_write_c2_config(v)		__write_32bit_c2_register($3, 0, v)
+#define nlm_read_c2_bucksize(b)		__read_32bit_c2_register($4, b)
+#define nlm_write_c2_bucksize(b, v)	__write_32bit_c2_register($4, b, v)
 
-#define	nlm_read_c2_rx_msg0()		__read_64bit_c2_register($1, 0)
-#define	nlm_read_c2_rx_msg1()		__read_64bit_c2_register($1, 1)
-#define	nlm_read_c2_rx_msg2()		__read_64bit_c2_register($1, 2)
-#define	nlm_read_c2_rx_msg3()		__read_64bit_c2_register($1, 3)
+#define nlm_read_c2_rx_msg0()		__read_64bit_c2_register($1, 0)
+#define nlm_read_c2_rx_msg1()		__read_64bit_c2_register($1, 1)
+#define nlm_read_c2_rx_msg2()		__read_64bit_c2_register($1, 2)
+#define nlm_read_c2_rx_msg3()		__read_64bit_c2_register($1, 3)
 
-#define	nlm_write_c2_tx_msg0(v)		__write_64bit_c2_register($0, 0, v)
-#define	nlm_write_c2_tx_msg1(v)		__write_64bit_c2_register($0, 1, v)
-#define	nlm_write_c2_tx_msg2(v)		__write_64bit_c2_register($0, 2, v)
-#define	nlm_write_c2_tx_msg3(v)		__write_64bit_c2_register($0, 3, v)
+#define nlm_write_c2_tx_msg0(v)		__write_64bit_c2_register($0, 0, v)
+#define nlm_write_c2_tx_msg1(v)		__write_64bit_c2_register($0, 1, v)
+#define nlm_write_c2_tx_msg2(v)		__write_64bit_c2_register($0, 2, v)
+#define nlm_write_c2_tx_msg3(v)		__write_64bit_c2_register($0, 3, v)
 
-#define	FMN_STN_RX_QSIZE		256
-#define	FMN_NSTATIONS			128
-#define	FMN_CORE_NBUCKETS		8
+#define FMN_STN_RX_QSIZE		256
+#define FMN_NSTATIONS			128
+#define FMN_CORE_NBUCKETS		8
 
 static inline void nlm_msgsnd(unsigned int stid)
 {
diff --git a/arch/mips/include/asm/netlogic/xlr/iomap.h b/arch/mips/include/asm/netlogic/xlr/iomap.h
index 2e768f0..ff4533d 100644
--- a/arch/mips/include/asm/netlogic/xlr/iomap.h
+++ b/arch/mips/include/asm/netlogic/xlr/iomap.h
@@ -35,66 +35,66 @@
 #ifndef _ASM_NLM_IOMAP_H
 #define _ASM_NLM_IOMAP_H
 
-#define DEFAULT_NETLOGIC_IO_BASE           CKSEG1ADDR(0x1ef00000)
-#define NETLOGIC_IO_DDR2_CHN0_OFFSET       0x01000
-#define NETLOGIC_IO_DDR2_CHN1_OFFSET       0x02000
-#define NETLOGIC_IO_DDR2_CHN2_OFFSET       0x03000
-#define NETLOGIC_IO_DDR2_CHN3_OFFSET       0x04000
-#define NETLOGIC_IO_PIC_OFFSET             0x08000
-#define NETLOGIC_IO_UART_0_OFFSET          0x14000
-#define NETLOGIC_IO_UART_1_OFFSET          0x15100
+#define DEFAULT_NETLOGIC_IO_BASE	   CKSEG1ADDR(0x1ef00000)
+#define NETLOGIC_IO_DDR2_CHN0_OFFSET	   0x01000
+#define NETLOGIC_IO_DDR2_CHN1_OFFSET	   0x02000
+#define NETLOGIC_IO_DDR2_CHN2_OFFSET	   0x03000
+#define NETLOGIC_IO_DDR2_CHN3_OFFSET	   0x04000
+#define NETLOGIC_IO_PIC_OFFSET		   0x08000
+#define NETLOGIC_IO_UART_0_OFFSET	   0x14000
+#define NETLOGIC_IO_UART_1_OFFSET	   0x15100
 
-#define NETLOGIC_IO_SIZE                   0x1000
+#define NETLOGIC_IO_SIZE		   0x1000
 
-#define NETLOGIC_IO_BRIDGE_OFFSET          0x00000
+#define NETLOGIC_IO_BRIDGE_OFFSET	   0x00000
 
-#define NETLOGIC_IO_RLD2_CHN0_OFFSET       0x05000
-#define NETLOGIC_IO_RLD2_CHN1_OFFSET       0x06000
+#define NETLOGIC_IO_RLD2_CHN0_OFFSET	   0x05000
+#define NETLOGIC_IO_RLD2_CHN1_OFFSET	   0x06000
 
-#define NETLOGIC_IO_SRAM_OFFSET            0x07000
+#define NETLOGIC_IO_SRAM_OFFSET		   0x07000
 
-#define NETLOGIC_IO_PCIX_OFFSET            0x09000
-#define NETLOGIC_IO_HT_OFFSET              0x0A000
+#define NETLOGIC_IO_PCIX_OFFSET		   0x09000
+#define NETLOGIC_IO_HT_OFFSET		   0x0A000
 
-#define NETLOGIC_IO_SECURITY_OFFSET        0x0B000
+#define NETLOGIC_IO_SECURITY_OFFSET	   0x0B000
 
-#define NETLOGIC_IO_GMAC_0_OFFSET          0x0C000
-#define NETLOGIC_IO_GMAC_1_OFFSET          0x0D000
-#define NETLOGIC_IO_GMAC_2_OFFSET          0x0E000
-#define NETLOGIC_IO_GMAC_3_OFFSET          0x0F000
+#define NETLOGIC_IO_GMAC_0_OFFSET	   0x0C000
+#define NETLOGIC_IO_GMAC_1_OFFSET	   0x0D000
+#define NETLOGIC_IO_GMAC_2_OFFSET	   0x0E000
+#define NETLOGIC_IO_GMAC_3_OFFSET	   0x0F000
 
 /* XLS devices */
-#define NETLOGIC_IO_GMAC_4_OFFSET          0x20000
-#define NETLOGIC_IO_GMAC_5_OFFSET          0x21000
-#define NETLOGIC_IO_GMAC_6_OFFSET          0x22000
-#define NETLOGIC_IO_GMAC_7_OFFSET          0x23000
+#define NETLOGIC_IO_GMAC_4_OFFSET	   0x20000
+#define NETLOGIC_IO_GMAC_5_OFFSET	   0x21000
+#define NETLOGIC_IO_GMAC_6_OFFSET	   0x22000
+#define NETLOGIC_IO_GMAC_7_OFFSET	   0x23000
 
-#define NETLOGIC_IO_PCIE_0_OFFSET          0x1E000
-#define NETLOGIC_IO_PCIE_1_OFFSET          0x1F000
-#define NETLOGIC_IO_SRIO_0_OFFSET          0x1E000
-#define NETLOGIC_IO_SRIO_1_OFFSET          0x1F000
+#define NETLOGIC_IO_PCIE_0_OFFSET	   0x1E000
+#define NETLOGIC_IO_PCIE_1_OFFSET	   0x1F000
+#define NETLOGIC_IO_SRIO_0_OFFSET	   0x1E000
+#define NETLOGIC_IO_SRIO_1_OFFSET	   0x1F000
 
-#define NETLOGIC_IO_USB_0_OFFSET           0x24000
-#define NETLOGIC_IO_USB_1_OFFSET           0x25000
+#define NETLOGIC_IO_USB_0_OFFSET	   0x24000
+#define NETLOGIC_IO_USB_1_OFFSET	   0x25000
 
-#define NETLOGIC_IO_COMP_OFFSET            0x1D000
+#define NETLOGIC_IO_COMP_OFFSET		   0x1D000
 /* end XLS devices */
 
 /* XLR devices */
-#define NETLOGIC_IO_SPI4_0_OFFSET          0x10000
-#define NETLOGIC_IO_XGMAC_0_OFFSET         0x11000
-#define NETLOGIC_IO_SPI4_1_OFFSET          0x12000
-#define NETLOGIC_IO_XGMAC_1_OFFSET         0x13000
+#define NETLOGIC_IO_SPI4_0_OFFSET	   0x10000
+#define NETLOGIC_IO_XGMAC_0_OFFSET	   0x11000
+#define NETLOGIC_IO_SPI4_1_OFFSET	   0x12000
+#define NETLOGIC_IO_XGMAC_1_OFFSET	   0x13000
 /* end XLR devices */
 
-#define NETLOGIC_IO_I2C_0_OFFSET           0x16000
-#define NETLOGIC_IO_I2C_1_OFFSET           0x17000
+#define NETLOGIC_IO_I2C_0_OFFSET	   0x16000
+#define NETLOGIC_IO_I2C_1_OFFSET	   0x17000
 
-#define NETLOGIC_IO_GPIO_OFFSET            0x18000
-#define NETLOGIC_IO_FLASH_OFFSET           0x19000
-#define NETLOGIC_IO_TB_OFFSET              0x1C000
+#define NETLOGIC_IO_GPIO_OFFSET		   0x18000
+#define NETLOGIC_IO_FLASH_OFFSET	   0x19000
+#define NETLOGIC_IO_TB_OFFSET		   0x1C000
 
-#define NETLOGIC_CPLD_OFFSET               KSEG1ADDR(0x1d840000)
+#define NETLOGIC_CPLD_OFFSET		   KSEG1ADDR(0x1d840000)
 
 /*
  * Base Address (Virtual) of the PCI Config address space
@@ -102,8 +102,8 @@
  * Config space spans 256 (num of buses) * 256 (num functions) * 256 bytes
  * ie 1<<24 = 16M
  */
-#define DEFAULT_PCI_CONFIG_BASE         0x18000000
-#define DEFAULT_HT_TYPE0_CFG_BASE       0x16000000
-#define DEFAULT_HT_TYPE1_CFG_BASE       0x17000000
+#define DEFAULT_PCI_CONFIG_BASE		0x18000000
+#define DEFAULT_HT_TYPE0_CFG_BASE	0x16000000
+#define DEFAULT_HT_TYPE1_CFG_BASE	0x17000000
 
 #endif
diff --git a/arch/mips/include/asm/netlogic/xlr/msidef.h b/arch/mips/include/asm/netlogic/xlr/msidef.h
index 7e39d40..c95d18e 100644
--- a/arch/mips/include/asm/netlogic/xlr/msidef.h
+++ b/arch/mips/include/asm/netlogic/xlr/msidef.h
@@ -45,21 +45,21 @@
  */
 
 #define MSI_DATA_VECTOR_SHIFT		0
-#define  MSI_DATA_VECTOR_MASK		0x000000ff
+#define	 MSI_DATA_VECTOR_MASK		0x000000ff
 #define	 MSI_DATA_VECTOR(v)		(((v) << MSI_DATA_VECTOR_SHIFT) & \
 						MSI_DATA_VECTOR_MASK)
 
 #define MSI_DATA_DELIVERY_MODE_SHIFT	8
-#define  MSI_DATA_DELIVERY_FIXED	(0 << MSI_DATA_DELIVERY_MODE_SHIFT)
-#define  MSI_DATA_DELIVERY_LOWPRI	(1 << MSI_DATA_DELIVERY_MODE_SHIFT)
+#define	 MSI_DATA_DELIVERY_FIXED	(0 << MSI_DATA_DELIVERY_MODE_SHIFT)
+#define	 MSI_DATA_DELIVERY_LOWPRI	(1 << MSI_DATA_DELIVERY_MODE_SHIFT)
 
 #define MSI_DATA_LEVEL_SHIFT		14
 #define	 MSI_DATA_LEVEL_DEASSERT	(0 << MSI_DATA_LEVEL_SHIFT)
 #define	 MSI_DATA_LEVEL_ASSERT		(1 << MSI_DATA_LEVEL_SHIFT)
 
 #define MSI_DATA_TRIGGER_SHIFT		15
-#define  MSI_DATA_TRIGGER_EDGE		(0 << MSI_DATA_TRIGGER_SHIFT)
-#define  MSI_DATA_TRIGGER_LEVEL		(1 << MSI_DATA_TRIGGER_SHIFT)
+#define	 MSI_DATA_TRIGGER_EDGE		(0 << MSI_DATA_TRIGGER_SHIFT)
+#define	 MSI_DATA_TRIGGER_LEVEL		(1 << MSI_DATA_TRIGGER_SHIFT)
 
 /*
  * Shift/mask fields for msi address
@@ -69,16 +69,16 @@
 #define MSI_ADDR_BASE_LO		0xfee00000
 
 #define MSI_ADDR_DEST_MODE_SHIFT	2
-#define  MSI_ADDR_DEST_MODE_PHYSICAL	(0 << MSI_ADDR_DEST_MODE_SHIFT)
+#define	 MSI_ADDR_DEST_MODE_PHYSICAL	(0 << MSI_ADDR_DEST_MODE_SHIFT)
 #define	 MSI_ADDR_DEST_MODE_LOGICAL	(1 << MSI_ADDR_DEST_MODE_SHIFT)
 
 #define MSI_ADDR_REDIRECTION_SHIFT	3
-#define  MSI_ADDR_REDIRECTION_CPU	(0 << MSI_ADDR_REDIRECTION_SHIFT)
-#define  MSI_ADDR_REDIRECTION_LOWPRI	(1 << MSI_ADDR_REDIRECTION_SHIFT)
+#define	 MSI_ADDR_REDIRECTION_CPU	(0 << MSI_ADDR_REDIRECTION_SHIFT)
+#define	 MSI_ADDR_REDIRECTION_LOWPRI	(1 << MSI_ADDR_REDIRECTION_SHIFT)
 
 #define MSI_ADDR_DEST_ID_SHIFT		12
 #define	 MSI_ADDR_DEST_ID_MASK		0x00ffff0
-#define  MSI_ADDR_DEST_ID(dest)		(((dest) << MSI_ADDR_DEST_ID_SHIFT) & \
+#define	 MSI_ADDR_DEST_ID(dest)		(((dest) << MSI_ADDR_DEST_ID_SHIFT) & \
 						 MSI_ADDR_DEST_ID_MASK)
 
 #endif /* ASM_RMI_MSIDEF_H */
diff --git a/arch/mips/include/asm/netlogic/xlr/pic.h b/arch/mips/include/asm/netlogic/xlr/pic.h
index 9a691b1..63c9917 100644
--- a/arch/mips/include/asm/netlogic/xlr/pic.h
+++ b/arch/mips/include/asm/netlogic/xlr/pic.h
@@ -35,10 +35,11 @@
 #ifndef _ASM_NLM_XLR_PIC_H
 #define _ASM_NLM_XLR_PIC_H
 
-#define PIC_CLKS_PER_SEC		66666666ULL
+#define PIC_CLK_HZ			66666666
 /* PIC hardware interrupt numbers */
 #define PIC_IRT_WD_INDEX		0
 #define PIC_IRT_TIMER_0_INDEX		1
+#define PIC_IRT_TIMER_INDEX(i)		((i) + PIC_IRT_TIMER_0_INDEX)
 #define PIC_IRT_TIMER_1_INDEX		2
 #define PIC_IRT_TIMER_2_INDEX		3
 #define PIC_IRT_TIMER_3_INDEX		4
@@ -99,6 +100,7 @@
 
 /* PIC Registers */
 #define PIC_CTRL			0x00
+#define PIC_CTRL_STE			8	/* timer enable start bit */
 #define PIC_IPI				0x04
 #define PIC_INT_ACK			0x06
 
@@ -116,7 +118,7 @@
 #define PIC_TIMER_COUNT_0_BASE		0x120
 #define PIC_TIMER_COUNT_1_BASE		0x130
 
-#define PIC_IRT_0(picintr)      (PIC_IRT_0_BASE + (picintr))
+#define PIC_IRT_0(picintr)	(PIC_IRT_0_BASE + (picintr))
 #define PIC_IRT_1(picintr)	(PIC_IRT_1_BASE + (picintr))
 
 #define PIC_TIMER_MAXVAL_0(i)	(PIC_TIMER_MAXVAL_0_BASE + (i))
@@ -130,9 +132,9 @@
  * 8-39. This leaves the IRQ 0-7 for cpu interrupts like
  * count/compare and FMN
  */
-#define PIC_IRQ_BASE            8
-#define PIC_INTR_TO_IRQ(i)      (PIC_IRQ_BASE + (i))
-#define PIC_IRQ_TO_INTR(i)      ((i) - PIC_IRQ_BASE)
+#define PIC_IRQ_BASE		8
+#define PIC_INTR_TO_IRQ(i)	(PIC_IRQ_BASE + (i))
+#define PIC_IRQ_TO_INTR(i)	((i) - PIC_IRQ_BASE)
 
 #define PIC_IRT_FIRST_IRQ	PIC_IRQ_BASE
 #define PIC_WD_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_WD_INDEX)
@@ -168,7 +170,7 @@
 #define PIC_BRIDGE_AERR_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_INDEX)
 #define PIC_BRIDGE_BERR_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_BERR_INDEX)
 #define PIC_BRIDGE_TB_XLR_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLR_INDEX)
-#define PIC_BRIDGE_AERR_NMI_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_NMI_INDEX)
+#define PIC_BRIDGE_AERR_NMI_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_NMI_INDEX)
 /* XLS defines */
 #define PIC_GMAC_4_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC4_INDEX)
 #define PIC_GMAC_5_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC5_INDEX)
@@ -251,12 +253,52 @@
 }
 
 static inline void
-nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt)
+nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt, int en)
 {
 	nlm_write_reg(base, PIC_IRT_0(irt), (1u << hwt));
 	/* local scheduling, invalid, level by default */
 	nlm_write_reg(base, PIC_IRT_1(irt),
-		(1 << 30) | (1 << 6) | irq);
+		(en << 30) | (1 << 6) | irq);
+}
+
+static inline uint64_t
+nlm_pic_read_timer(uint64_t base, int timer)
+{
+	uint32_t up1, up2, low;
+
+	up1 = nlm_read_reg(base, PIC_TIMER_COUNT_1(timer));
+	low = nlm_read_reg(base, PIC_TIMER_COUNT_0(timer));
+	up2 = nlm_read_reg(base, PIC_TIMER_COUNT_1(timer));
+
+	if (up1 != up2) /* wrapped, get the new low */
+		low = nlm_read_reg(base, PIC_TIMER_COUNT_0(timer));
+	return ((uint64_t)up2 << 32) | low;
+
+}
+
+static inline uint32_t
+nlm_pic_read_timer32(uint64_t base, int timer)
+{
+	return nlm_read_reg(base, PIC_TIMER_COUNT_0(timer));
+}
+
+static inline void
+nlm_pic_set_timer(uint64_t base, int timer, uint64_t value, int irq, int cpu)
+{
+	uint32_t up, low;
+	uint64_t pic_ctrl = nlm_read_reg(base, PIC_CTRL);
+	int en;
+
+	en = (irq > 0);
+	up = value >> 32;
+	low = value & 0xFFFFFFFF;
+	nlm_write_reg(base, PIC_TIMER_MAXVAL_0(timer), low);
+	nlm_write_reg(base, PIC_TIMER_MAXVAL_1(timer), up);
+	nlm_pic_init_irt(base, PIC_IRT_TIMER_INDEX(timer), irq, cpu, 0);
+
+	/* enable the timer */
+	pic_ctrl |= (1 << (PIC_CTRL_STE + timer));
+	nlm_write_reg(base, PIC_CTRL, pic_ctrl);
 }
 #endif
 #endif /* _ASM_NLM_XLR_PIC_H */
diff --git a/arch/mips/include/asm/nile4.h b/arch/mips/include/asm/nile4.h
index af0e51a..2e2436d 100644
--- a/arch/mips/include/asm/nile4.h
+++ b/arch/mips/include/asm/nile4.h
@@ -2,7 +2,7 @@
  *  asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions
  *
  *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- *                     Sony Software Development Center Europe (SDCE), Brussels
+ *		       Sony Software Development Center Europe (SDCE), Brussels
  *
  *  This file is based on the following documentation:
  *
@@ -17,7 +17,7 @@
 
 
     /*
-     *  Physical Device Address Registers (PDARs)
+     *	Physical Device Address Registers (PDARs)
      */
 
 #define NILE4_SDRAM0	0x0000	/* SDRAM Bank 0 [R/W] */
@@ -37,7 +37,7 @@
 
 
     /*
-     *  CPU Interface Registers
+     *	CPU Interface Registers
      */
 
 #define NILE4_CPUSTAT	0x0080	/* CPU Status [R/W] */
@@ -50,7 +50,7 @@
 
 
     /*
-     *  Memory-Interface Registers
+     *	Memory-Interface Registers
      */
 
 #define NILE4_MEMCTRL	0x00C0	/* Memory Control */
@@ -59,7 +59,7 @@
 
 
     /*
-     *  PCI-Bus Registers
+     *	PCI-Bus Registers
      */
 
 #define NILE4_PCICTRL	0x00E0	/* PCI Control [R/W] */
@@ -70,7 +70,7 @@
 
 
     /*
-     *  Local-Bus Registers
+     *	Local-Bus Registers
      */
 
 #define NILE4_LCNFG	0x0100	/* Local Bus Configuration [R/W] */
@@ -88,7 +88,7 @@
 
 
     /*
-     *  DMA Registers
+     *	DMA Registers
      */
 
 #define NILE4_DMACTRL0	0x0180	/* DMA Control 0 [R/W] */
@@ -100,7 +100,7 @@
 
 
     /*
-     *  Timer Registers
+     *	Timer Registers
      */
 
 #define NILE4_T0CTRL	0x01C0	/* SDRAM Refresh Control [R/W] */
@@ -114,7 +114,7 @@
 
 
     /*
-     *  PCI Configuration Space Registers
+     *	PCI Configuration Space Registers
      */
 
 #define NILE4_PCI_BASE	0x0200
@@ -153,10 +153,10 @@
 
 
     /*
-     *  Serial-Port Registers
+     *	Serial-Port Registers
      */
 
-#define NILE4_UART_BASE	0x0300
+#define NILE4_UART_BASE 0x0300
 
 #define NILE4_UARTRBR	0x0300	/* UART Receiver Data Buffer [R] */
 #define NILE4_UARTTHR	0x0300	/* UART Transmitter Data Holding [W] */
@@ -175,7 +175,7 @@
 
 
     /*
-     *  Interrupt Lines
+     *	Interrupt Lines
      */
 
 #define NILE4_INT_CPCE	0	/* CPU-Interface Parity-Error Interrupt */
@@ -185,7 +185,7 @@
 #define NILE4_INT_UART	4	/* UART Interrupt */
 #define NILE4_INT_WDOG	5	/* Watchdog Timer Interrupt */
 #define NILE4_INT_GPT	6	/* General-Purpose Timer Interrupt */
-#define NILE4_INT_LBRTD	7	/* Local-Bus Ready Timer Interrupt */
+#define NILE4_INT_LBRTD 7	/* Local-Bus Ready Timer Interrupt */
 #define NILE4_INT_INTA	8	/* PCI Interrupt Signal INTA# */
 #define NILE4_INT_INTB	9	/* PCI Interrupt Signal INTB# */
 #define NILE4_INT_INTC	10	/* PCI Interrupt Signal INTC# */
@@ -197,7 +197,7 @@
 
 
     /*
-     *  Nile 4 Register Access
+     *	Nile 4 Register Access
      */
 
 static inline void nile4_sync(void)
@@ -247,7 +247,7 @@
 
 
     /*
-     *  Physical Device Address Registers
+     *	Physical Device Address Registers
      */
 
 extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width,
@@ -255,7 +255,7 @@
 
 
     /*
-     *  PCI Master Registers
+     *	PCI Master Registers
      */
 
 #define NILE4_PCICMD_IACK	0	/* PCI Interrupt Acknowledge */
@@ -265,9 +265,9 @@
 
 
     /*
-     *  PCI Address Spaces
+     *	PCI Address Spaces
      *
-     *  Note that these are multiplexed using PCIINIT[01]!
+     *	Note that these are multiplexed using PCIINIT[01]!
      */
 
 #define NILE4_PCI_IO_BASE	0xa6000000
@@ -280,7 +280,7 @@
 
 
     /*
-     *  Interrupt Programming
+     *	Interrupt Programming
      */
 
 #define NUM_I8259_INTERRUPTS	16
diff --git a/arch/mips/include/asm/octeon/cvmx-address.h b/arch/mips/include/asm/octeon/cvmx-address.h
index 3c74d82..e2d874e 100644
--- a/arch/mips/include/asm/octeon/cvmx-address.h
+++ b/arch/mips/include/asm/octeon/cvmx-address.h
@@ -84,20 +84,20 @@
  * Octeon-I HW never interprets this X (<39:36> reserved
  * for future expansion), software should set to 0.
  *
- *  - 0x0 XXX0 0000 0000 to      DRAM         Cached
+ *  - 0x0 XXX0 0000 0000 to	 DRAM	      Cached
  *  - 0x0 XXX0 0FFF FFFF
  *
- *  - 0x0 XXX0 1000 0000 to      Boot Bus     Uncached  (Converted to 0x1 00X0 1000 0000
- *  - 0x0 XXX0 1FFF FFFF         + EJTAG                           to 0x1 00X0 1FFF FFFF)
+ *  - 0x0 XXX0 1000 0000 to	 Boot Bus     Uncached	(Converted to 0x1 00X0 1000 0000
+ *  - 0x0 XXX0 1FFF FFFF	 + EJTAG			   to 0x1 00X0 1FFF FFFF)
  *
- *  - 0x0 XXX0 2000 0000 to      DRAM         Cached
+ *  - 0x0 XXX0 2000 0000 to	 DRAM	      Cached
  *  - 0x0 XXXF FFFF FFFF
  *
- *  - 0x1 00X0 0000 0000 to      Boot Bus     Uncached
+ *  - 0x1 00X0 0000 0000 to	 Boot Bus     Uncached
  *  - 0x1 00XF FFFF FFFF
  *
- *  - 0x1 01X0 0000 0000 to      Other NCB    Uncached
- *  - 0x1 FFXF FFFF FFFF         devices
+ *  - 0x1 01X0 0000 0000 to	 Other NCB    Uncached
+ *  - 0x1 FFXF FFFF FFFF	 devices
  *
  * Decode of all Octeon addresses
  */
@@ -129,9 +129,9 @@
 	 */
 	struct {
 		uint64_t R:2;	/* CVMX_MIPS_SPACE_XKPHYS in this case */
-		uint64_t cca:3;	/* ignored by octeon */
+		uint64_t cca:3; /* ignored by octeon */
 		uint64_t mbz:10;
-		uint64_t pa:49;	/* physical address */
+		uint64_t pa:49; /* physical address */
 	} sxkphys;
 
 	/* physical address */
@@ -253,22 +253,22 @@
 #define CVMX_OCT_DID_ASX1 23ULL
 #define CVMX_OCT_DID_IOB 30ULL
 
-#define CVMX_OCT_DID_PKT_SEND       CVMX_FULL_DID(CVMX_OCT_DID_PKT, 2ULL)
-#define CVMX_OCT_DID_TAG_SWTAG      CVMX_FULL_DID(CVMX_OCT_DID_TAG, 0ULL)
-#define CVMX_OCT_DID_TAG_TAG1       CVMX_FULL_DID(CVMX_OCT_DID_TAG, 1ULL)
-#define CVMX_OCT_DID_TAG_TAG2       CVMX_FULL_DID(CVMX_OCT_DID_TAG, 2ULL)
-#define CVMX_OCT_DID_TAG_TAG3       CVMX_FULL_DID(CVMX_OCT_DID_TAG, 3ULL)
+#define CVMX_OCT_DID_PKT_SEND	    CVMX_FULL_DID(CVMX_OCT_DID_PKT, 2ULL)
+#define CVMX_OCT_DID_TAG_SWTAG	    CVMX_FULL_DID(CVMX_OCT_DID_TAG, 0ULL)
+#define CVMX_OCT_DID_TAG_TAG1	    CVMX_FULL_DID(CVMX_OCT_DID_TAG, 1ULL)
+#define CVMX_OCT_DID_TAG_TAG2	    CVMX_FULL_DID(CVMX_OCT_DID_TAG, 2ULL)
+#define CVMX_OCT_DID_TAG_TAG3	    CVMX_FULL_DID(CVMX_OCT_DID_TAG, 3ULL)
 #define CVMX_OCT_DID_TAG_NULL_RD    CVMX_FULL_DID(CVMX_OCT_DID_TAG, 4ULL)
-#define CVMX_OCT_DID_TAG_CSR        CVMX_FULL_DID(CVMX_OCT_DID_TAG, 7ULL)
-#define CVMX_OCT_DID_FAU_FAI        CVMX_FULL_DID(CVMX_OCT_DID_IOB, 0ULL)
-#define CVMX_OCT_DID_TIM_CSR        CVMX_FULL_DID(CVMX_OCT_DID_TIM, 0ULL)
-#define CVMX_OCT_DID_KEY_RW         CVMX_FULL_DID(CVMX_OCT_DID_KEY, 0ULL)
-#define CVMX_OCT_DID_PCI_6          CVMX_FULL_DID(CVMX_OCT_DID_PCI, 6ULL)
-#define CVMX_OCT_DID_MIS_BOO        CVMX_FULL_DID(CVMX_OCT_DID_MIS, 0ULL)
-#define CVMX_OCT_DID_PCI_RML        CVMX_FULL_DID(CVMX_OCT_DID_PCI, 0ULL)
-#define CVMX_OCT_DID_IPD_CSR        CVMX_FULL_DID(CVMX_OCT_DID_IPD, 7ULL)
-#define CVMX_OCT_DID_DFA_CSR        CVMX_FULL_DID(CVMX_OCT_DID_DFA, 7ULL)
-#define CVMX_OCT_DID_MIS_CSR        CVMX_FULL_DID(CVMX_OCT_DID_MIS, 7ULL)
-#define CVMX_OCT_DID_ZIP_CSR        CVMX_FULL_DID(CVMX_OCT_DID_ZIP, 0ULL)
+#define CVMX_OCT_DID_TAG_CSR	    CVMX_FULL_DID(CVMX_OCT_DID_TAG, 7ULL)
+#define CVMX_OCT_DID_FAU_FAI	    CVMX_FULL_DID(CVMX_OCT_DID_IOB, 0ULL)
+#define CVMX_OCT_DID_TIM_CSR	    CVMX_FULL_DID(CVMX_OCT_DID_TIM, 0ULL)
+#define CVMX_OCT_DID_KEY_RW	    CVMX_FULL_DID(CVMX_OCT_DID_KEY, 0ULL)
+#define CVMX_OCT_DID_PCI_6	    CVMX_FULL_DID(CVMX_OCT_DID_PCI, 6ULL)
+#define CVMX_OCT_DID_MIS_BOO	    CVMX_FULL_DID(CVMX_OCT_DID_MIS, 0ULL)
+#define CVMX_OCT_DID_PCI_RML	    CVMX_FULL_DID(CVMX_OCT_DID_PCI, 0ULL)
+#define CVMX_OCT_DID_IPD_CSR	    CVMX_FULL_DID(CVMX_OCT_DID_IPD, 7ULL)
+#define CVMX_OCT_DID_DFA_CSR	    CVMX_FULL_DID(CVMX_OCT_DID_DFA, 7ULL)
+#define CVMX_OCT_DID_MIS_CSR	    CVMX_FULL_DID(CVMX_OCT_DID_MIS, 7ULL)
+#define CVMX_OCT_DID_ZIP_CSR	    CVMX_FULL_DID(CVMX_OCT_DID_ZIP, 0ULL)
 
 #endif /* __CVMX_ADDRESS_H__ */
diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
index 1db1dc2..284fa8d 100644
--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
@@ -91,11 +91,11 @@
 #if (CVMX_BOOTINFO_MIN_VER >= 1)
 	/*
 	 * Several boards support compact flash on the Octeon boot
-	 * bus.  The CF memory spaces may be mapped to different
+	 * bus.	 The CF memory spaces may be mapped to different
 	 * addresses on different boards.  These are the physical
 	 * addresses, so care must be taken to use the correct
 	 * XKPHYS/KSEG0 addressing depending on the application's
-	 * ABI.  These values will be 0 if CF is not present.
+	 * ABI.	 These values will be 0 if CF is not present.
 	 */
 	uint64_t compact_flash_common_base_addr;
 	uint64_t compact_flash_attribute_base_addr;
@@ -131,7 +131,7 @@
 #define CVMX_BOOTINFO_CFG_FLAG_NO_MAGIC			(1ull << 3)
 /* This flag is set if the TLB mappings are not contained in the
  * 0x10000000 - 0x20000000 boot bus region. */
-#define CVMX_BOOTINFO_CFG_FLAG_OVERSIZE_TLB_MAPPING     (1ull << 4)
+#define CVMX_BOOTINFO_CFG_FLAG_OVERSIZE_TLB_MAPPING	(1ull << 4)
 #define CVMX_BOOTINFO_CFG_FLAG_BREAK			(1ull << 5)
 
 #endif /*   (CVMX_BOOTINFO_MAJ_VER == 1) */
@@ -164,9 +164,9 @@
 	CVMX_BOARD_TYPE_EBT5600 = 22,
 	CVMX_BOARD_TYPE_EBH5201 = 23,
 	CVMX_BOARD_TYPE_EBT5200 = 24,
-	CVMX_BOARD_TYPE_CB5600  = 25,
-	CVMX_BOARD_TYPE_CB5601  = 26,
-	CVMX_BOARD_TYPE_CB5200  = 27,
+	CVMX_BOARD_TYPE_CB5600	= 25,
+	CVMX_BOARD_TYPE_CB5601	= 26,
+	CVMX_BOARD_TYPE_CB5200	= 27,
 	/* Special 'generic' board type, supports many boards */
 	CVMX_BOARD_TYPE_GENERIC = 28,
 	CVMX_BOARD_TYPE_EBH5610 = 29,
@@ -223,7 +223,7 @@
 	CVMX_BOARD_TYPE_CUST_DEFINED_MAX = 20000,
 
 	/*
-	 * Set aside a range for customer private use.  The SDK won't
+	 * Set aside a range for customer private use.	The SDK won't
 	 * use any numbers in this range.
 	 */
 	CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
diff --git a/arch/mips/include/asm/octeon/cvmx-bootmem.h b/arch/mips/include/asm/octeon/cvmx-bootmem.h
index 42db2be..352f1dc 100644
--- a/arch/mips/include/asm/octeon/cvmx-bootmem.h
+++ b/arch/mips/include/asm/octeon/cvmx-bootmem.h
@@ -39,7 +39,7 @@
 #define CVMX_BOOTMEM_NUM_NAMED_BLOCKS 64
 
 /* minimum alignment of bootmem alloced blocks */
-#define CVMX_BOOTMEM_ALIGNMENT_SIZE     (16ull)
+#define CVMX_BOOTMEM_ALIGNMENT_SIZE	(16ull)
 
 /* Flags for cvmx_bootmem_phy_mem* functions */
 /* Allocate from end of block instead of beginning */
@@ -151,8 +151,8 @@
  * memory cannot be allocated at the specified address.
  *
  * @size:      Size in bytes of block to allocate
- * @address:   Physical address to allocate memory at.  If this memory is not
- *                  available, the allocation fails.
+ * @address:   Physical address to allocate memory at.	If this memory is not
+ *		    available, the allocation fails.
  * @alignment: Alignment required - must be power of 2
  * Returns pointer to block of memory, NULL on error
  */
@@ -181,7 +181,7 @@
  * @name:   name of block to free
  *
  * Returns 0 on failure,
- *         !0 on success
+ *	   !0 on success
  */
 
 
@@ -210,9 +210,9 @@
  *
  * @size:     Size in bytes of block to allocate
  * @address:  Physical address to allocate memory at.  If this
- *            memory is not available, the allocation fails.
+ *	      memory is not available, the allocation fails.
  * @name:     name of block - must be less than CVMX_BOOTMEM_NAME_LEN
- *            bytes
+ *	      bytes
  *
  * Returns a pointer to block of memory, NULL on error
  */
@@ -249,7 +249,7 @@
  * @name:   name of block to free
  *
  * Returns pointer to named block descriptor on success
- *         0 on failure
+ *	   0 on failure
  */
 struct cvmx_bootmem_named_block_desc *cvmx_bootmem_find_named_block(char *name);
 
@@ -258,20 +258,20 @@
  * (optional) requested address and alignment.
  *
  * @req_size: size of region to allocate.  All requests are rounded up
- *            to be a multiple CVMX_BOOTMEM_ALIGNMENT_SIZE bytes size
+ *	      to be a multiple CVMX_BOOTMEM_ALIGNMENT_SIZE bytes size
  *
  * @address_min: Minimum address that block can occupy.
  *
  * @address_max: Specifies the maximum address_min (inclusive) that
- *               the allocation can use.
+ *		 the allocation can use.
  *
  * @alignment: Requested alignment of the block.  If this alignment
- *             cannot be met, the allocation fails.  This must be a
- *             power of 2.  (Note: Alignment of
- *             CVMX_BOOTMEM_ALIGNMENT_SIZE bytes is required, and
- *             internally enforced.  Requested alignments of less than
- *             CVMX_BOOTMEM_ALIGNMENT_SIZE are set to
- *             CVMX_BOOTMEM_ALIGNMENT_SIZE.)
+ *	       cannot be met, the allocation fails.  This must be a
+ *	       power of 2.  (Note: Alignment of
+ *	       CVMX_BOOTMEM_ALIGNMENT_SIZE bytes is required, and
+ *	       internally enforced.  Requested alignments of less than
+ *	       CVMX_BOOTMEM_ALIGNMENT_SIZE are set to
+ *	       CVMX_BOOTMEM_ALIGNMENT_SIZE.)
  *
  * @flags:     Flags to control options for the allocation.
  *
@@ -285,21 +285,21 @@
  * Allocates a named block of physical memory from the free list, at
  * (optional) requested address and alignment.
  *
- * @param size      size of region to allocate.  All requests are rounded
- *                  up to be a multiple CVMX_BOOTMEM_ALIGNMENT_SIZE
- *                  bytes size
+ * @param size	    size of region to allocate.	 All requests are rounded
+ *		    up to be a multiple CVMX_BOOTMEM_ALIGNMENT_SIZE
+ *		    bytes size
  * @param min_addr Minimum address that block can occupy.
  * @param max_addr  Specifies the maximum address_min (inclusive) that
- *                  the allocation can use.
+ *		    the allocation can use.
  * @param alignment Requested alignment of the block.  If this
- *                  alignment cannot be met, the allocation fails.
- *                  This must be a power of 2.  (Note: Alignment of
- *                  CVMX_BOOTMEM_ALIGNMENT_SIZE bytes is required, and
- *                  internally enforced.  Requested alignments of less
- *                  than CVMX_BOOTMEM_ALIGNMENT_SIZE are set to
- *                  CVMX_BOOTMEM_ALIGNMENT_SIZE.)
- * @param name      name to assign to named block
- * @param flags     Flags to control options for the allocation.
+ *		    alignment cannot be met, the allocation fails.
+ *		    This must be a power of 2.	(Note: Alignment of
+ *		    CVMX_BOOTMEM_ALIGNMENT_SIZE bytes is required, and
+ *		    internally enforced.  Requested alignments of less
+ *		    than CVMX_BOOTMEM_ALIGNMENT_SIZE are set to
+ *		    CVMX_BOOTMEM_ALIGNMENT_SIZE.)
+ * @param name	    name to assign to named block
+ * @param flags	    Flags to control options for the allocation.
  *
  * @return physical address of block allocated, or -1 on failure
  */
@@ -312,14 +312,14 @@
  * Finds a named memory block by name.
  * Also used for finding an unused entry in the named block table.
  *
- * @name: Name of memory block to find.  If NULL pointer given, then
- *        finds unused descriptor, if available.
+ * @name: Name of memory block to find.	 If NULL pointer given, then
+ *	  finds unused descriptor, if available.
  *
  * @flags: Flags to control options for the allocation.
  *
  * Returns Pointer to memory block descriptor, NULL if not found.
- *         If NULL returned when name parameter is NULL, then no memory
- *         block descriptors are available.
+ *	   If NULL returned when name parameter is NULL, then no memory
+ *	   block descriptors are available.
  */
 struct cvmx_bootmem_named_block_desc *
 cvmx_bootmem_phy_named_block_find(char *name, uint32_t flags);
@@ -331,31 +331,31 @@
  * @flags:  flags for passing options
  *
  * Returns 0 on failure
- *         1 on success
+ *	   1 on success
  */
 int cvmx_bootmem_phy_named_block_free(char *name, uint32_t flags);
 
 /**
- * Frees a block to the bootmem allocator list.  This must
+ * Frees a block to the bootmem allocator list.	 This must
  * be used with care, as the size provided must match the size
  * of the block that was allocated, or the list will become
  * corrupted.
  *
  * IMPORTANT:  This is only intended to be used as part of named block
  * frees and initial population of the free memory list.
- *                                                      *
+ *							*
  *
  * @phy_addr: physical address of block
  * @size:     size of block in bytes.
  * @flags:    flags for passing options
  *
  * Returns 1 on success,
- *         0 on failure
+ *	   0 on failure
  */
 int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags);
 
 /**
- * Locks the bootmem allocator.  This is useful in certain situations
+ * Locks the bootmem allocator.	 This is useful in certain situations
  * where multiple allocations must be made without being interrupted.
  * This should be used with the CVMX_BOOTMEM_FLAG_NO_LOCKING flag.
  *
diff --git a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
index fed9112..024a71b 100644
--- a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
+++ b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
@@ -244,33 +244,33 @@
 		".set noreorder\n"
 		"1:\n"
 		/* Atomic add one to ticket_ptr */
-		"ll     %[my_ticket], %[ticket_ptr]\n"
+		"ll	%[my_ticket], %[ticket_ptr]\n"
 		/* and store the original value */
-		"li     %[ticket], 1\n"
+		"li	%[ticket], 1\n"
 		/* in my_ticket */
-		"baddu  %[ticket], %[my_ticket]\n"
-		"sc     %[ticket], %[ticket_ptr]\n"
-		"beqz   %[ticket], 1b\n"
+		"baddu	%[ticket], %[my_ticket]\n"
+		"sc	%[ticket], %[ticket_ptr]\n"
+		"beqz	%[ticket], 1b\n"
 		" nop\n"
 		/* Load the current now_serving ticket */
-		"lbu    %[ticket], %[now_serving]\n"
+		"lbu	%[ticket], %[now_serving]\n"
 		"2:\n"
 		/* Jump out if now_serving == my_ticket */
-		"beq    %[ticket], %[my_ticket], 4f\n"
+		"beq	%[ticket], %[my_ticket], 4f\n"
 		/* Find out how many tickets are in front of me */
-		" subu   %[ticket], %[my_ticket], %[ticket]\n"
+		" subu	 %[ticket], %[my_ticket], %[ticket]\n"
 		/* Use tickets in front of me minus one to delay */
 		"subu  %[ticket], 1\n"
 		/* Delay will be ((tickets in front)-1)*32 loops */
-		"cins   %[ticket], %[ticket], 5, 7\n"
+		"cins	%[ticket], %[ticket], 5, 7\n"
 		"3:\n"
 		/* Loop here until our ticket might be up */
-		"bnez   %[ticket], 3b\n"
-		" subu  %[ticket], 1\n"
+		"bnez	%[ticket], 3b\n"
+		" subu	%[ticket], 1\n"
 		/* Jump back up to check out ticket again */
-		"b      2b\n"
+		"b	2b\n"
 		/* Load the current now_serving ticket */
-		" lbu   %[ticket], %[now_serving]\n"
+		" lbu	%[ticket], %[now_serving]\n"
 		"4:\n"
 		".set pop\n" :
 		[ticket_ptr] "=m"(__cvmx_cmd_queue_state_ptr->ticket[__cvmx_cmd_queue_get_index(queue_id)]),
@@ -313,9 +313,9 @@
  *
  * @queue_id:  Hardware command queue to write to
  * @use_locking:
- *                  Use internal locking to ensure exclusive access for queue
- *                  updates. If you don't use this locking you must ensure
- *                  exclusivity some other way. Locking is strongly recommended.
+ *		    Use internal locking to ensure exclusive access for queue
+ *		    updates. If you don't use this locking you must ensure
+ *		    exclusivity some other way. Locking is strongly recommended.
  * @cmd_count: Number of command words to write
  * @cmds:      Array of commands to write
  *
@@ -411,9 +411,9 @@
  *
  * @queue_id: Hardware command queue to write to
  * @use_locking:
- *                 Use internal locking to ensure exclusive access for queue
- *                 updates. If you don't use this locking you must ensure
- *                 exclusivity some other way. Locking is strongly recommended.
+ *		   Use internal locking to ensure exclusive access for queue
+ *		   updates. If you don't use this locking you must ensure
+ *		   exclusivity some other way. Locking is strongly recommended.
  * @cmd1:     Command
  * @cmd2:     Command
  *
@@ -510,9 +510,9 @@
  *
  * @queue_id: Hardware command queue to write to
  * @use_locking:
- *                 Use internal locking to ensure exclusive access for queue
- *                 updates. If you don't use this locking you must ensure
- *                 exclusivity some other way. Locking is strongly recommended.
+ *		   Use internal locking to ensure exclusive access for queue
+ *		   updates. If you don't use this locking you must ensure
+ *		   exclusivity some other way. Locking is strongly recommended.
  * @cmd1:     Command
  * @cmd2:     Command
  * @cmd3:     Command
diff --git a/arch/mips/include/asm/octeon/cvmx-config.h b/arch/mips/include/asm/octeon/cvmx-config.h
index 26835d1b..f7dd17d 100644
--- a/arch/mips/include/asm/octeon/cvmx-config.h
+++ b/arch/mips/include/asm/octeon/cvmx-config.h
@@ -31,13 +31,13 @@
 
 /* Pools in use */
 /* Packet buffers */
-#define CVMX_FPA_PACKET_POOL                (0)
-#define CVMX_FPA_PACKET_POOL_SIZE           CVMX_FPA_POOL_0_SIZE
+#define CVMX_FPA_PACKET_POOL		    (0)
+#define CVMX_FPA_PACKET_POOL_SIZE	    CVMX_FPA_POOL_0_SIZE
 /* Work queue entrys */
-#define CVMX_FPA_WQE_POOL                   (1)
-#define CVMX_FPA_WQE_POOL_SIZE              CVMX_FPA_POOL_1_SIZE
+#define CVMX_FPA_WQE_POOL		    (1)
+#define CVMX_FPA_WQE_POOL_SIZE		    CVMX_FPA_POOL_1_SIZE
 /* PKO queue command buffers */
-#define CVMX_FPA_OUTPUT_BUFFER_POOL         (2)
+#define CVMX_FPA_OUTPUT_BUFFER_POOL	    (2)
 #define CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE    CVMX_FPA_POOL_2_SIZE
 
 /*************************  FAU allocation ********************************/
@@ -45,7 +45,7 @@
  * in order of descending size so that all alignment constraints are
  * automatically met.  The enums are linked so that the following enum
  * continues allocating where the previous one left off, so the
- * numbering within each enum always starts with zero.  The macros
+ * numbering within each enum always starts with zero.	The macros
  * take care of the address increment size, so the values entered
  * always increase by 1.  FAU registers are accessed with byte
  * addresses.
@@ -90,9 +90,9 @@
  * be taken into account.
  */
 /* Generic scratch iobdma area */
-#define CVMX_SCR_SCRATCH               (0)
+#define CVMX_SCR_SCRATCH	       (0)
 /* First location available after cvmx-config.h allocated region. */
-#define CVMX_SCR_REG_AVAIL_BASE        (8)
+#define CVMX_SCR_REG_AVAIL_BASE	       (8)
 
 /*
  * CVMX_HELPER_FIRST_MBUFF_SKIP is the number of bytes to reserve
@@ -145,14 +145,14 @@
  * 1: include
  */
 #define CVMX_HELPER_INPUT_TAG_IPV6_SRC_IP	0
-#define CVMX_HELPER_INPUT_TAG_IPV6_DST_IP   	0
-#define CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT 	0
-#define CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT 	0
-#define CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER 	0
+#define CVMX_HELPER_INPUT_TAG_IPV6_DST_IP	0
+#define CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT	0
+#define CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT	0
+#define CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER	0
 #define CVMX_HELPER_INPUT_TAG_IPV4_SRC_IP	0
-#define CVMX_HELPER_INPUT_TAG_IPV4_DST_IP   	0
-#define CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT 	0
-#define CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT 	0
+#define CVMX_HELPER_INPUT_TAG_IPV4_DST_IP	0
+#define CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT	0
+#define CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT	0
 #define CVMX_HELPER_INPUT_TAG_IPV4_PROTOCOL	0
 #define CVMX_HELPER_INPUT_TAG_INPUT_PORT	1
 
diff --git a/arch/mips/include/asm/octeon/cvmx-fau.h b/arch/mips/include/asm/octeon/cvmx-fau.h
index a6939fc8..ef98f7f 100644
--- a/arch/mips/include/asm/octeon/cvmx-fau.h
+++ b/arch/mips/include/asm/octeon/cvmx-fau.h
@@ -37,13 +37,13 @@
  */
 
 #define CVMX_FAU_LOAD_IO_ADDRESS    cvmx_build_io_address(0x1e, 0)
-#define CVMX_FAU_BITS_SCRADDR       63, 56
-#define CVMX_FAU_BITS_LEN           55, 48
-#define CVMX_FAU_BITS_INEVAL        35, 14
-#define CVMX_FAU_BITS_TAGWAIT       13, 13
-#define CVMX_FAU_BITS_NOADD         13, 13
-#define CVMX_FAU_BITS_SIZE          12, 11
-#define CVMX_FAU_BITS_REGISTER      10, 0
+#define CVMX_FAU_BITS_SCRADDR	    63, 56
+#define CVMX_FAU_BITS_LEN	    55, 48
+#define CVMX_FAU_BITS_INEVAL	    35, 14
+#define CVMX_FAU_BITS_TAGWAIT	    13, 13
+#define CVMX_FAU_BITS_NOADD	    13, 13
+#define CVMX_FAU_BITS_SIZE	    12, 11
+#define CVMX_FAU_BITS_REGISTER	    10, 0
 
 typedef enum {
 	CVMX_FAU_OP_SIZE_8 = 0,
@@ -109,11 +109,11 @@
  * Builds a store I/O address for writing to the FAU
  *
  * @noadd:  0 = Store value is atomically added to the current value
- *               1 = Store value is atomically written over the current value
+ *		 1 = Store value is atomically written over the current value
  * @reg:    FAU atomic register to access. 0 <= reg < 2048.
- *               - Step by 2 for 16 bit access.
- *               - Step by 4 for 32 bit access.
- *               - Step by 8 for 64 bit access.
+ *		 - Step by 2 for 16 bit access.
+ *		 - Step by 4 for 32 bit access.
+ *		 - Step by 8 for 64 bit access.
  * Returns Address to store for atomic update
  */
 static inline uint64_t __cvmx_fau_store_address(uint64_t noadd, uint64_t reg)
@@ -127,16 +127,16 @@
  * Builds a I/O address for accessing the FAU
  *
  * @tagwait: Should the atomic add wait for the current tag switch
- *                operation to complete.
- *                - 0 = Don't wait
- *                - 1 = Wait for tag switch to complete
+ *		  operation to complete.
+ *		  - 0 = Don't wait
+ *		  - 1 = Wait for tag switch to complete
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 2 for 16 bit access.
- *                - Step by 4 for 32 bit access.
- *                - Step by 8 for 64 bit access.
+ *		  - Step by 2 for 16 bit access.
+ *		  - Step by 4 for 32 bit access.
+ *		  - Step by 8 for 64 bit access.
  * @value:   Signed value to add.
- *                Note: When performing 32 and 64 bit access, only the low
- *                22 bits are available.
+ *		  Note: When performing 32 and 64 bit access, only the low
+ *		  22 bits are available.
  * Returns Address to read from for atomic update
  */
 static inline uint64_t __cvmx_fau_atomic_address(uint64_t tagwait, uint64_t reg,
@@ -152,9 +152,9 @@
  * Perform an atomic 64 bit add
  *
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 8 for 64 bit access.
+ *		  - Step by 8 for 64 bit access.
  * @value:   Signed value to add.
- *                Note: Only the low 22 bits are available.
+ *		  Note: Only the low 22 bits are available.
  * Returns Value of the register before the update
  */
 static inline int64_t cvmx_fau_fetch_and_add64(cvmx_fau_reg_64_t reg,
@@ -167,9 +167,9 @@
  * Perform an atomic 32 bit add
  *
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 4 for 32 bit access.
+ *		  - Step by 4 for 32 bit access.
  * @value:   Signed value to add.
- *                Note: Only the low 22 bits are available.
+ *		  Note: Only the low 22 bits are available.
  * Returns Value of the register before the update
  */
 static inline int32_t cvmx_fau_fetch_and_add32(cvmx_fau_reg_32_t reg,
@@ -182,7 +182,7 @@
  * Perform an atomic 16 bit add
  *
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 2 for 16 bit access.
+ *		  - Step by 2 for 16 bit access.
  * @value:   Signed value to add.
  * Returns Value of the register before the update
  */
@@ -209,12 +209,12 @@
  * completes
  *
  * @reg:    FAU atomic register to access. 0 <= reg < 2048.
- *               - Step by 8 for 64 bit access.
+ *		 - Step by 8 for 64 bit access.
  * @value:  Signed value to add.
- *               Note: Only the low 22 bits are available.
+ *		 Note: Only the low 22 bits are available.
  * Returns If a timeout occurs, the error bit will be set. Otherwise
- *         the value of the register before the update will be
- *         returned
+ *	   the value of the register before the update will be
+ *	   returned
  */
 static inline cvmx_fau_tagwait64_t
 cvmx_fau_tagwait_fetch_and_add64(cvmx_fau_reg_64_t reg, int64_t value)
@@ -233,12 +233,12 @@
  * completes
  *
  * @reg:    FAU atomic register to access. 0 <= reg < 2048.
- *               - Step by 4 for 32 bit access.
+ *		 - Step by 4 for 32 bit access.
  * @value:  Signed value to add.
- *               Note: Only the low 22 bits are available.
+ *		 Note: Only the low 22 bits are available.
  * Returns If a timeout occurs, the error bit will be set. Otherwise
- *         the value of the register before the update will be
- *         returned
+ *	   the value of the register before the update will be
+ *	   returned
  */
 static inline cvmx_fau_tagwait32_t
 cvmx_fau_tagwait_fetch_and_add32(cvmx_fau_reg_32_t reg, int32_t value)
@@ -257,11 +257,11 @@
  * completes
  *
  * @reg:    FAU atomic register to access. 0 <= reg < 2048.
- *               - Step by 2 for 16 bit access.
+ *		 - Step by 2 for 16 bit access.
  * @value:  Signed value to add.
  * Returns If a timeout occurs, the error bit will be set. Otherwise
- *         the value of the register before the update will be
- *         returned
+ *	   the value of the register before the update will be
+ *	   returned
  */
 static inline cvmx_fau_tagwait16_t
 cvmx_fau_tagwait_fetch_and_add16(cvmx_fau_reg_16_t reg, int16_t value)
@@ -282,8 +282,8 @@
  * @reg:    FAU atomic register to access. 0 <= reg < 2048.
  * @value:  Signed value to add.
  * Returns If a timeout occurs, the error bit will be set. Otherwise
- *         the value of the register before the update will be
- *         returned
+ *	   the value of the register before the update will be
+ *	   returned
  */
 static inline cvmx_fau_tagwait8_t
 cvmx_fau_tagwait_fetch_and_add8(cvmx_fau_reg_8_t reg, int8_t value)
@@ -301,21 +301,21 @@
  *
  * @scraddr: Scratch pad byte address to write to.  Must be 8 byte aligned
  * @value:   Signed value to add.
- *                Note: When performing 32 and 64 bit access, only the low
- *                22 bits are available.
+ *		  Note: When performing 32 and 64 bit access, only the low
+ *		  22 bits are available.
  * @tagwait: Should the atomic add wait for the current tag switch
- *                operation to complete.
- *                - 0 = Don't wait
- *                - 1 = Wait for tag switch to complete
+ *		  operation to complete.
+ *		  - 0 = Don't wait
+ *		  - 1 = Wait for tag switch to complete
  * @size:    The size of the operation:
- *                - CVMX_FAU_OP_SIZE_8  (0) = 8 bits
- *                - CVMX_FAU_OP_SIZE_16 (1) = 16 bits
- *                - CVMX_FAU_OP_SIZE_32 (2) = 32 bits
- *                - CVMX_FAU_OP_SIZE_64 (3) = 64 bits
+ *		  - CVMX_FAU_OP_SIZE_8	(0) = 8 bits
+ *		  - CVMX_FAU_OP_SIZE_16 (1) = 16 bits
+ *		  - CVMX_FAU_OP_SIZE_32 (2) = 32 bits
+ *		  - CVMX_FAU_OP_SIZE_64 (3) = 64 bits
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 2 for 16 bit access.
- *                - Step by 4 for 32 bit access.
- *                - Step by 8 for 64 bit access.
+ *		  - Step by 2 for 16 bit access.
+ *		  - Step by 4 for 32 bit access.
+ *		  - Step by 8 for 64 bit access.
  * Returns Data to write using cvmx_send_single
  */
 static inline uint64_t __cvmx_fau_iobdma_data(uint64_t scraddr, int64_t value,
@@ -337,11 +337,11 @@
  * placed in the scratch memory at byte address scraddr.
  *
  * @scraddr: Scratch memory byte address to put response in.
- *                Must be 8 byte aligned.
+ *		  Must be 8 byte aligned.
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 8 for 64 bit access.
+ *		  - Step by 8 for 64 bit access.
  * @value:   Signed value to add.
- *                Note: Only the low 22 bits are available.
+ *		  Note: Only the low 22 bits are available.
  * Returns Placed in the scratch pad register
  */
 static inline void cvmx_fau_async_fetch_and_add64(uint64_t scraddr,
@@ -357,11 +357,11 @@
  * placed in the scratch memory at byte address scraddr.
  *
  * @scraddr: Scratch memory byte address to put response in.
- *                Must be 8 byte aligned.
+ *		  Must be 8 byte aligned.
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 4 for 32 bit access.
+ *		  - Step by 4 for 32 bit access.
  * @value:   Signed value to add.
- *                Note: Only the low 22 bits are available.
+ *		  Note: Only the low 22 bits are available.
  * Returns Placed in the scratch pad register
  */
 static inline void cvmx_fau_async_fetch_and_add32(uint64_t scraddr,
@@ -377,9 +377,9 @@
  * placed in the scratch memory at byte address scraddr.
  *
  * @scraddr: Scratch memory byte address to put response in.
- *                Must be 8 byte aligned.
+ *		  Must be 8 byte aligned.
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 2 for 16 bit access.
+ *		  - Step by 2 for 16 bit access.
  * @value:   Signed value to add.
  * Returns Placed in the scratch pad register
  */
@@ -396,7 +396,7 @@
  * placed in the scratch memory at byte address scraddr.
  *
  * @scraddr: Scratch memory byte address to put response in.
- *                Must be 8 byte aligned.
+ *		  Must be 8 byte aligned.
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
  * @value:   Signed value to add.
  * Returns Placed in the scratch pad register
@@ -414,14 +414,14 @@
  * switch completes.
  *
  * @scraddr: Scratch memory byte address to put response in.  Must be
- *           8 byte aligned.  If a timeout occurs, the error bit (63)
- *           will be set. Otherwise the value of the register before
- *           the update will be returned
+ *	     8 byte aligned.  If a timeout occurs, the error bit (63)
+ *	     will be set. Otherwise the value of the register before
+ *	     the update will be returned
  *
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 8 for 64 bit access.
+ *		  - Step by 8 for 64 bit access.
  * @value:   Signed value to add.
- *                Note: Only the low 22 bits are available.
+ *		  Note: Only the low 22 bits are available.
  * Returns Placed in the scratch pad register
  */
 static inline void cvmx_fau_async_tagwait_fetch_and_add64(uint64_t scraddr,
@@ -437,14 +437,14 @@
  * switch completes.
  *
  * @scraddr: Scratch memory byte address to put response in.  Must be
- *           8 byte aligned.  If a timeout occurs, the error bit (63)
- *           will be set. Otherwise the value of the register before
- *           the update will be returned
+ *	     8 byte aligned.  If a timeout occurs, the error bit (63)
+ *	     will be set. Otherwise the value of the register before
+ *	     the update will be returned
  *
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 4 for 32 bit access.
+ *		  - Step by 4 for 32 bit access.
  * @value:   Signed value to add.
- *                Note: Only the low 22 bits are available.
+ *		  Note: Only the low 22 bits are available.
  * Returns Placed in the scratch pad register
  */
 static inline void cvmx_fau_async_tagwait_fetch_and_add32(uint64_t scraddr,
@@ -460,12 +460,12 @@
  * switch completes.
  *
  * @scraddr: Scratch memory byte address to put response in.  Must be
- *           8 byte aligned.  If a timeout occurs, the error bit (63)
- *           will be set. Otherwise the value of the register before
- *           the update will be returned
+ *	     8 byte aligned.  If a timeout occurs, the error bit (63)
+ *	     will be set. Otherwise the value of the register before
+ *	     the update will be returned
  *
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 2 for 16 bit access.
+ *		  - Step by 2 for 16 bit access.
  * @value:   Signed value to add.
  *
  * Returns Placed in the scratch pad register
@@ -483,9 +483,9 @@
  * switch completes.
  *
  * @scraddr: Scratch memory byte address to put response in.  Must be
- *           8 byte aligned.  If a timeout occurs, the error bit (63)
- *           will be set. Otherwise the value of the register before
- *           the update will be returned
+ *	     8 byte aligned.  If a timeout occurs, the error bit (63)
+ *	     will be set. Otherwise the value of the register before
+ *	     the update will be returned
  *
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
  * @value:   Signed value to add.
@@ -504,7 +504,7 @@
  * Perform an atomic 64 bit add
  *
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 8 for 64 bit access.
+ *		  - Step by 8 for 64 bit access.
  * @value:   Signed value to add.
  */
 static inline void cvmx_fau_atomic_add64(cvmx_fau_reg_64_t reg, int64_t value)
@@ -516,7 +516,7 @@
  * Perform an atomic 32 bit add
  *
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 4 for 32 bit access.
+ *		  - Step by 4 for 32 bit access.
  * @value:   Signed value to add.
  */
 static inline void cvmx_fau_atomic_add32(cvmx_fau_reg_32_t reg, int32_t value)
@@ -528,7 +528,7 @@
  * Perform an atomic 16 bit add
  *
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 2 for 16 bit access.
+ *		  - Step by 2 for 16 bit access.
  * @value:   Signed value to add.
  */
 static inline void cvmx_fau_atomic_add16(cvmx_fau_reg_16_t reg, int16_t value)
@@ -551,7 +551,7 @@
  * Perform an atomic 64 bit write
  *
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 8 for 64 bit access.
+ *		  - Step by 8 for 64 bit access.
  * @value:   Signed value to write.
  */
 static inline void cvmx_fau_atomic_write64(cvmx_fau_reg_64_t reg, int64_t value)
@@ -563,7 +563,7 @@
  * Perform an atomic 32 bit write
  *
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 4 for 32 bit access.
+ *		  - Step by 4 for 32 bit access.
  * @value:   Signed value to write.
  */
 static inline void cvmx_fau_atomic_write32(cvmx_fau_reg_32_t reg, int32_t value)
@@ -575,7 +575,7 @@
  * Perform an atomic 16 bit write
  *
  * @reg:     FAU atomic register to access. 0 <= reg < 2048.
- *                - Step by 2 for 16 bit access.
+ *		  - Step by 2 for 16 bit access.
  * @value:   Signed value to write.
  */
 static inline void cvmx_fau_atomic_write16(cvmx_fau_reg_16_t reg, int16_t value)
diff --git a/arch/mips/include/asm/octeon/cvmx-fpa.h b/arch/mips/include/asm/octeon/cvmx-fpa.h
index 541a1ae..aa26a2c 100644
--- a/arch/mips/include/asm/octeon/cvmx-fpa.h
+++ b/arch/mips/include/asm/octeon/cvmx-fpa.h
@@ -39,9 +39,9 @@
 #include <asm/octeon/cvmx-address.h>
 #include <asm/octeon/cvmx-fpa-defs.h>
 
-#define CVMX_FPA_NUM_POOLS      8
+#define CVMX_FPA_NUM_POOLS	8
 #define CVMX_FPA_MIN_BLOCK_SIZE 128
-#define CVMX_FPA_ALIGNMENT      128
+#define CVMX_FPA_ALIGNMENT	128
 
 /**
  * Structure describing the data format used for stores to the FPA.
@@ -186,8 +186,8 @@
 /**
  * Asynchronously get a new block from the FPA
  *
- * @scr_addr: Local scratch address to put response in.  This is a byte address,
- *                  but must be 8 byte aligned.
+ * @scr_addr: Local scratch address to put response in.	 This is a byte address,
+ *		    but must be 8 byte aligned.
  * @pool:      Pool to get the block from
  */
 static inline void cvmx_fpa_async_alloc(uint64_t scr_addr, uint64_t pool)
@@ -212,7 +212,7 @@
  * @ptr:    Block to free
  * @pool:   Pool to put it in
  * @num_cache_lines:
- *               Cache lines to invalidate
+ *		 Cache lines to invalidate
  */
 static inline void cvmx_fpa_free_nosync(void *ptr, uint64_t pool,
 					uint64_t num_cache_lines)
@@ -234,7 +234,7 @@
  * @ptr:    Block to free
  * @pool:   Pool to put it in
  * @num_cache_lines:
- *               Cache lines to invalidate
+ *		 Cache lines to invalidate
  */
 static inline void cvmx_fpa_free(void *ptr, uint64_t pool,
 				 uint64_t num_cache_lines)
@@ -245,7 +245,7 @@
 	    CVMX_ADDR_DIDSPACE(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool));
 	/*
 	 * Make sure that any previous writes to memory go out before
-	 * we free this buffer.  This also serves as a barrier to
+	 * we free this buffer.	 This also serves as a barrier to
 	 * prevent GCC from reordering operations to after the
 	 * free.
 	 */
@@ -259,17 +259,17 @@
  * This can only be called once per pool. Make sure proper
  * locking enforces this.
  *
- * @pool:       Pool to initialize
- *                   0 <= pool < 8
- * @name:       Constant character string to name this pool.
- *                   String is not copied.
- * @buffer:     Pointer to the block of memory to use. This must be
- *                   accessible by all processors and external hardware.
+ * @pool:	Pool to initialize
+ *		     0 <= pool < 8
+ * @name:	Constant character string to name this pool.
+ *		     String is not copied.
+ * @buffer:	Pointer to the block of memory to use. This must be
+ *		     accessible by all processors and external hardware.
  * @block_size: Size for each block controlled by the FPA
  * @num_blocks: Number of blocks
  *
  * Returns 0 on Success,
- *         -1 on failure
+ *	   -1 on failure
  */
 extern int cvmx_fpa_setup_pool(uint64_t pool, const char *name, void *buffer,
 			       uint64_t block_size, uint64_t num_blocks);
@@ -282,8 +282,8 @@
  *
  * @pool:   Pool to shutdown
  * Returns Zero on success
- *         - Positive is count of missing buffers
- *         - Negative is too many buffers or corrupted pointers
+ *	   - Positive is count of missing buffers
+ *	   - Negative is too many buffers or corrupted pointers
  */
 extern uint64_t cvmx_fpa_shutdown_pool(uint64_t pool);
 
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-board.h b/arch/mips/include/asm/octeon/cvmx-helper-board.h
index 442f508..41785dd 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-board.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-board.h
@@ -48,7 +48,7 @@
  * Fake IPD port, the RGMII/MII interface may use different PHY, use
  * this macro to return appropriate MIX address to read the PHY.
  */
-#define CVMX_HELPER_BOARD_MGMT_IPD_PORT     -10
+#define CVMX_HELPER_BOARD_MGMT_IPD_PORT	    -10
 
 /**
  * cvmx_override_board_link_get(int ipd_port) is a function
@@ -86,10 +86,10 @@
  *
  * @phy_addr:  The address of the PHY to program
  * @link_flags:
- *                  Flags to control autonegotiation.  Bit 0 is autonegotiation
- *                  enable/disable to maintain backware compatibility.
+ *		    Flags to control autonegotiation.  Bit 0 is autonegotiation
+ *		    enable/disable to maintain backware compatibility.
  * @link_info: Link speed to program. If the speed is zero and autonegotiation
- *                  is enabled, all possible negotiation speeds are advertised.
+ *		    is enabled, all possible negotiation speeds are advertised.
  *
  * Returns Zero on success, negative on failure
  */
@@ -111,10 +111,10 @@
  * enumeration from the bootloader.
  *
  * @ipd_port: IPD input port associated with the port we want to get link
- *                 status for.
+ *		   status for.
  *
  * Returns The ports link status. If the link isn't fully resolved, this must
- *         return zero.
+ *	   return zero.
  */
 extern cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port);
 
@@ -134,10 +134,10 @@
  *
  * @interface: Interface to probe
  * @supported_ports:
- *                  Number of ports Octeon supports.
+ *		    Number of ports Octeon supports.
  *
  * Returns Number of ports the actual board supports. Many times this will
- *         simple be "support_ports".
+ *	   simple be "support_ports".
  */
 extern int __cvmx_helper_board_interface_probe(int interface,
 					       int supported_ports);
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h b/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h
index 78295ba..4d7a3db 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h
@@ -98,9 +98,9 @@
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h b/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h
index 9a9b6c1..4debb1c5 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h
@@ -92,9 +92,9 @@
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-util.h b/arch/mips/include/asm/octeon/cvmx-helper-util.h
index 01c8ddd..f446f21 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-util.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-util.h
@@ -57,11 +57,11 @@
  *
  * @queue:  Input queue to setup RED on (0-7)
  * @pass_thresh:
- *               Packets will begin slowly dropping when there are less than
- *               this many packet buffers free in FPA 0.
+ *		 Packets will begin slowly dropping when there are less than
+ *		 this many packet buffers free in FPA 0.
  * @drop_thresh:
- *               All incoming packets will be dropped when there are less
- *               than this many free packet buffers in FPA 0.
+ *		 All incoming packets will be dropped when there are less
+ *		 than this many free packet buffers in FPA 0.
  * Returns Zero on success. Negative on failure
  */
 extern int cvmx_helper_setup_red_queue(int queue, int pass_thresh,
@@ -71,11 +71,11 @@
  * Setup Random Early Drop to automatically begin dropping packets.
  *
  * @pass_thresh:
- *               Packets will begin slowly dropping when there are less than
- *               this many packet buffers free in FPA 0.
+ *		 Packets will begin slowly dropping when there are less than
+ *		 this many packet buffers free in FPA 0.
  * @drop_thresh:
- *               All incoming packets will be dropped when there are less
- *               than this many free packet buffers in FPA 0.
+ *		 All incoming packets will be dropped when there are less
+ *		 than this many free packet buffers in FPA 0.
  * Returns Zero on success. Negative on failure
  */
 extern int cvmx_helper_setup_red(int pass_thresh, int drop_thresh);
@@ -84,7 +84,7 @@
  * Get the version of the CVMX libraries.
  *
  * Returns Version string. Note this buffer is allocated statically
- *         and will be shared by all callers.
+ *	   and will be shared by all callers.
  */
 extern const char *cvmx_helper_get_version(void);
 
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-xaui.h b/arch/mips/include/asm/octeon/cvmx-helper-xaui.h
index f6fbc4f..5e89ed7 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-xaui.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-xaui.h
@@ -92,9 +92,9 @@
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */
diff --git a/arch/mips/include/asm/octeon/cvmx-helper.h b/arch/mips/include/asm/octeon/cvmx-helper.h
index 691c814..5a3090d 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper.h
@@ -93,12 +93,12 @@
 /**
  * This function enables the IPD and also enables the packet interfaces.
  * The packet interfaces (RGMII and SPI) must be enabled after the
- * IPD.  This should be called by the user program after any additional
+ * IPD.	 This should be called by the user program after any additional
  * IPD configuration changes are made if CVMX_HELPER_ENABLE_IPD
  * is not set in the executive-config.h file.
  *
  * Returns 0 on success
- *         -1 on failure
+ *	   -1 on failure
  */
 extern int cvmx_helper_ipd_and_packet_input_enable(void);
 
@@ -128,7 +128,7 @@
  * @interface: Which interface to return port count for.
  *
  * Returns Port count for interface
- *         -1 for uninitialized interface
+ *	   -1 for uninitialized interface
  */
 extern int cvmx_helper_ports_on_interface(int interface);
 
@@ -150,7 +150,7 @@
  * @interface: Interface to probe
  *
  * Returns Mode of the interface. Unknown or unsupported interfaces return
- *         DISABLED.
+ *	   DISABLED.
  */
 extern cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int
 								   interface);
@@ -214,9 +214,9 @@
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */
diff --git a/arch/mips/include/asm/octeon/cvmx-ipd.h b/arch/mips/include/asm/octeon/cvmx-ipd.h
index 115a552..e13490e 100644
--- a/arch/mips/include/asm/octeon/cvmx-ipd.h
+++ b/arch/mips/include/asm/octeon/cvmx-ipd.h
@@ -38,8 +38,8 @@
 #include <asm/octeon/cvmx-ipd-defs.h>
 
 enum cvmx_ipd_mode {
-   CVMX_IPD_OPC_MODE_STT = 0LL,   /* All blocks DRAM, not cached in L2 */
-   CVMX_IPD_OPC_MODE_STF = 1LL,   /* All bloccks into  L2 */
+   CVMX_IPD_OPC_MODE_STT = 0LL,	  /* All blocks DRAM, not cached in L2 */
+   CVMX_IPD_OPC_MODE_STF = 1LL,	  /* All bloccks into  L2 */
    CVMX_IPD_OPC_MODE_STF1_STT = 2LL,   /* 1st block L2, rest DRAM */
    CVMX_IPD_OPC_MODE_STF2_STT = 3LL    /* 1st, 2nd blocks L2, rest DRAM */
 };
@@ -60,17 +60,17 @@
  *
  * @mbuff_size: Packets buffer size in 8 byte words
  * @first_mbuff_skip:
- *                   Number of 8 byte words to skip in the first buffer
+ *		     Number of 8 byte words to skip in the first buffer
  * @not_first_mbuff_skip:
- *                   Number of 8 byte words to skip in each following buffer
+ *		     Number of 8 byte words to skip in each following buffer
  * @first_back: Must be same as first_mbuff_skip / 128
  * @second_back:
- *                   Must be same as not_first_mbuff_skip / 128
+ *		     Must be same as not_first_mbuff_skip / 128
  * @wqe_fpa_pool:
- *                   FPA pool to get work entries from
+ *		     FPA pool to get work entries from
  * @cache_mode:
  * @back_pres_enable_flag:
- *                   Enable or disable port back pressure
+ *		     Enable or disable port back pressure
  */
 static inline void cvmx_ipd_config(uint64_t mbuff_size,
 				   uint64_t first_mbuff_skip,
diff --git a/arch/mips/include/asm/octeon/cvmx-l2c.h b/arch/mips/include/asm/octeon/cvmx-l2c.h
index 2c8ff9e..11c0a8f 100644
--- a/arch/mips/include/asm/octeon/cvmx-l2c.h
+++ b/arch/mips/include/asm/octeon/cvmx-l2c.h
@@ -33,13 +33,13 @@
 #ifndef __CVMX_L2C_H__
 #define __CVMX_L2C_H__
 
-#define CVMX_L2_ASSOC     cvmx_l2c_get_num_assoc()   /* Deprecated macro, use function */
+#define CVMX_L2_ASSOC	  cvmx_l2c_get_num_assoc()   /* Deprecated macro, use function */
 #define CVMX_L2_SET_BITS  cvmx_l2c_get_set_bits()    /* Deprecated macro, use function */
-#define CVMX_L2_SETS      cvmx_l2c_get_num_sets()    /* Deprecated macro, use function */
+#define CVMX_L2_SETS	  cvmx_l2c_get_num_sets()    /* Deprecated macro, use function */
 
 
 #define CVMX_L2C_IDX_ADDR_SHIFT 7  /* based on 128 byte cache line size */
-#define CVMX_L2C_IDX_MASK       (cvmx_l2c_get_num_sets() - 1)
+#define CVMX_L2C_IDX_MASK	(cvmx_l2c_get_num_sets() - 1)
 
 /* Defines for index aliasing computations */
 #define CVMX_L2C_TAG_ADDR_ALIAS_SHIFT (CVMX_L2C_IDX_ADDR_SHIFT + cvmx_l2c_get_set_bits())
@@ -67,91 +67,91 @@
 
   /* L2C Performance Counter events. */
 enum cvmx_l2c_event {
-	CVMX_L2C_EVENT_CYCLES           =  0,
+	CVMX_L2C_EVENT_CYCLES		=  0,
 	CVMX_L2C_EVENT_INSTRUCTION_MISS =  1,
-	CVMX_L2C_EVENT_INSTRUCTION_HIT  =  2,
-	CVMX_L2C_EVENT_DATA_MISS        =  3,
-	CVMX_L2C_EVENT_DATA_HIT         =  4,
-	CVMX_L2C_EVENT_MISS             =  5,
-	CVMX_L2C_EVENT_HIT              =  6,
-	CVMX_L2C_EVENT_VICTIM_HIT       =  7,
-	CVMX_L2C_EVENT_INDEX_CONFLICT   =  8,
-	CVMX_L2C_EVENT_TAG_PROBE        =  9,
-	CVMX_L2C_EVENT_TAG_UPDATE       = 10,
-	CVMX_L2C_EVENT_TAG_COMPLETE     = 11,
-	CVMX_L2C_EVENT_TAG_DIRTY        = 12,
-	CVMX_L2C_EVENT_DATA_STORE_NOP   = 13,
-	CVMX_L2C_EVENT_DATA_STORE_READ  = 14,
+	CVMX_L2C_EVENT_INSTRUCTION_HIT	=  2,
+	CVMX_L2C_EVENT_DATA_MISS	=  3,
+	CVMX_L2C_EVENT_DATA_HIT		=  4,
+	CVMX_L2C_EVENT_MISS		=  5,
+	CVMX_L2C_EVENT_HIT		=  6,
+	CVMX_L2C_EVENT_VICTIM_HIT	=  7,
+	CVMX_L2C_EVENT_INDEX_CONFLICT	=  8,
+	CVMX_L2C_EVENT_TAG_PROBE	=  9,
+	CVMX_L2C_EVENT_TAG_UPDATE	= 10,
+	CVMX_L2C_EVENT_TAG_COMPLETE	= 11,
+	CVMX_L2C_EVENT_TAG_DIRTY	= 12,
+	CVMX_L2C_EVENT_DATA_STORE_NOP	= 13,
+	CVMX_L2C_EVENT_DATA_STORE_READ	= 14,
 	CVMX_L2C_EVENT_DATA_STORE_WRITE = 15,
-	CVMX_L2C_EVENT_FILL_DATA_VALID  = 16,
-	CVMX_L2C_EVENT_WRITE_REQUEST    = 17,
-	CVMX_L2C_EVENT_READ_REQUEST     = 18,
+	CVMX_L2C_EVENT_FILL_DATA_VALID	= 16,
+	CVMX_L2C_EVENT_WRITE_REQUEST	= 17,
+	CVMX_L2C_EVENT_READ_REQUEST	= 18,
 	CVMX_L2C_EVENT_WRITE_DATA_VALID = 19,
-	CVMX_L2C_EVENT_XMC_NOP          = 20,
-	CVMX_L2C_EVENT_XMC_LDT          = 21,
-	CVMX_L2C_EVENT_XMC_LDI          = 22,
-	CVMX_L2C_EVENT_XMC_LDD          = 23,
-	CVMX_L2C_EVENT_XMC_STF          = 24,
-	CVMX_L2C_EVENT_XMC_STT          = 25,
-	CVMX_L2C_EVENT_XMC_STP          = 26,
-	CVMX_L2C_EVENT_XMC_STC          = 27,
-	CVMX_L2C_EVENT_XMC_DWB          = 28,
-	CVMX_L2C_EVENT_XMC_PL2          = 29,
-	CVMX_L2C_EVENT_XMC_PSL1         = 30,
-	CVMX_L2C_EVENT_XMC_IOBLD        = 31,
-	CVMX_L2C_EVENT_XMC_IOBST        = 32,
-	CVMX_L2C_EVENT_XMC_IOBDMA       = 33,
-	CVMX_L2C_EVENT_XMC_IOBRSP       = 34,
-	CVMX_L2C_EVENT_XMC_BUS_VALID    = 35,
-	CVMX_L2C_EVENT_XMC_MEM_DATA     = 36,
-	CVMX_L2C_EVENT_XMC_REFL_DATA    = 37,
-	CVMX_L2C_EVENT_XMC_IOBRSP_DATA  = 38,
-	CVMX_L2C_EVENT_RSC_NOP          = 39,
-	CVMX_L2C_EVENT_RSC_STDN         = 40,
-	CVMX_L2C_EVENT_RSC_FILL         = 41,
-	CVMX_L2C_EVENT_RSC_REFL         = 42,
-	CVMX_L2C_EVENT_RSC_STIN         = 43,
-	CVMX_L2C_EVENT_RSC_SCIN         = 44,
-	CVMX_L2C_EVENT_RSC_SCFL         = 45,
-	CVMX_L2C_EVENT_RSC_SCDN         = 46,
-	CVMX_L2C_EVENT_RSC_DATA_VALID   = 47,
-	CVMX_L2C_EVENT_RSC_VALID_FILL   = 48,
-	CVMX_L2C_EVENT_RSC_VALID_STRSP  = 49,
-	CVMX_L2C_EVENT_RSC_VALID_REFL   = 50,
-	CVMX_L2C_EVENT_LRF_REQ          = 51,
-	CVMX_L2C_EVENT_DT_RD_ALLOC      = 52,
-	CVMX_L2C_EVENT_DT_WR_INVAL      = 53,
+	CVMX_L2C_EVENT_XMC_NOP		= 20,
+	CVMX_L2C_EVENT_XMC_LDT		= 21,
+	CVMX_L2C_EVENT_XMC_LDI		= 22,
+	CVMX_L2C_EVENT_XMC_LDD		= 23,
+	CVMX_L2C_EVENT_XMC_STF		= 24,
+	CVMX_L2C_EVENT_XMC_STT		= 25,
+	CVMX_L2C_EVENT_XMC_STP		= 26,
+	CVMX_L2C_EVENT_XMC_STC		= 27,
+	CVMX_L2C_EVENT_XMC_DWB		= 28,
+	CVMX_L2C_EVENT_XMC_PL2		= 29,
+	CVMX_L2C_EVENT_XMC_PSL1		= 30,
+	CVMX_L2C_EVENT_XMC_IOBLD	= 31,
+	CVMX_L2C_EVENT_XMC_IOBST	= 32,
+	CVMX_L2C_EVENT_XMC_IOBDMA	= 33,
+	CVMX_L2C_EVENT_XMC_IOBRSP	= 34,
+	CVMX_L2C_EVENT_XMC_BUS_VALID	= 35,
+	CVMX_L2C_EVENT_XMC_MEM_DATA	= 36,
+	CVMX_L2C_EVENT_XMC_REFL_DATA	= 37,
+	CVMX_L2C_EVENT_XMC_IOBRSP_DATA	= 38,
+	CVMX_L2C_EVENT_RSC_NOP		= 39,
+	CVMX_L2C_EVENT_RSC_STDN		= 40,
+	CVMX_L2C_EVENT_RSC_FILL		= 41,
+	CVMX_L2C_EVENT_RSC_REFL		= 42,
+	CVMX_L2C_EVENT_RSC_STIN		= 43,
+	CVMX_L2C_EVENT_RSC_SCIN		= 44,
+	CVMX_L2C_EVENT_RSC_SCFL		= 45,
+	CVMX_L2C_EVENT_RSC_SCDN		= 46,
+	CVMX_L2C_EVENT_RSC_DATA_VALID	= 47,
+	CVMX_L2C_EVENT_RSC_VALID_FILL	= 48,
+	CVMX_L2C_EVENT_RSC_VALID_STRSP	= 49,
+	CVMX_L2C_EVENT_RSC_VALID_REFL	= 50,
+	CVMX_L2C_EVENT_LRF_REQ		= 51,
+	CVMX_L2C_EVENT_DT_RD_ALLOC	= 52,
+	CVMX_L2C_EVENT_DT_WR_INVAL	= 53,
 	CVMX_L2C_EVENT_MAX
 };
 
 /* L2C Performance Counter events for Octeon2. */
 enum cvmx_l2c_tad_event {
-	CVMX_L2C_TAD_EVENT_NONE          = 0,
-	CVMX_L2C_TAD_EVENT_TAG_HIT       = 1,
-	CVMX_L2C_TAD_EVENT_TAG_MISS      = 2,
-	CVMX_L2C_TAD_EVENT_TAG_NOALLOC   = 3,
-	CVMX_L2C_TAD_EVENT_TAG_VICTIM    = 4,
-	CVMX_L2C_TAD_EVENT_SC_FAIL       = 5,
-	CVMX_L2C_TAD_EVENT_SC_PASS       = 6,
-	CVMX_L2C_TAD_EVENT_LFB_VALID     = 7,
-	CVMX_L2C_TAD_EVENT_LFB_WAIT_LFB  = 8,
-	CVMX_L2C_TAD_EVENT_LFB_WAIT_VAB  = 9,
-	CVMX_L2C_TAD_EVENT_QUAD0_INDEX   = 128,
-	CVMX_L2C_TAD_EVENT_QUAD0_READ    = 129,
-	CVMX_L2C_TAD_EVENT_QUAD0_BANK    = 130,
-	CVMX_L2C_TAD_EVENT_QUAD0_WDAT    = 131,
-	CVMX_L2C_TAD_EVENT_QUAD1_INDEX   = 144,
-	CVMX_L2C_TAD_EVENT_QUAD1_READ    = 145,
-	CVMX_L2C_TAD_EVENT_QUAD1_BANK    = 146,
-	CVMX_L2C_TAD_EVENT_QUAD1_WDAT    = 147,
-	CVMX_L2C_TAD_EVENT_QUAD2_INDEX   = 160,
-	CVMX_L2C_TAD_EVENT_QUAD2_READ    = 161,
-	CVMX_L2C_TAD_EVENT_QUAD2_BANK    = 162,
-	CVMX_L2C_TAD_EVENT_QUAD2_WDAT    = 163,
-	CVMX_L2C_TAD_EVENT_QUAD3_INDEX   = 176,
-	CVMX_L2C_TAD_EVENT_QUAD3_READ    = 177,
-	CVMX_L2C_TAD_EVENT_QUAD3_BANK    = 178,
-	CVMX_L2C_TAD_EVENT_QUAD3_WDAT    = 179,
+	CVMX_L2C_TAD_EVENT_NONE		 = 0,
+	CVMX_L2C_TAD_EVENT_TAG_HIT	 = 1,
+	CVMX_L2C_TAD_EVENT_TAG_MISS	 = 2,
+	CVMX_L2C_TAD_EVENT_TAG_NOALLOC	 = 3,
+	CVMX_L2C_TAD_EVENT_TAG_VICTIM	 = 4,
+	CVMX_L2C_TAD_EVENT_SC_FAIL	 = 5,
+	CVMX_L2C_TAD_EVENT_SC_PASS	 = 6,
+	CVMX_L2C_TAD_EVENT_LFB_VALID	 = 7,
+	CVMX_L2C_TAD_EVENT_LFB_WAIT_LFB	 = 8,
+	CVMX_L2C_TAD_EVENT_LFB_WAIT_VAB	 = 9,
+	CVMX_L2C_TAD_EVENT_QUAD0_INDEX	 = 128,
+	CVMX_L2C_TAD_EVENT_QUAD0_READ	 = 129,
+	CVMX_L2C_TAD_EVENT_QUAD0_BANK	 = 130,
+	CVMX_L2C_TAD_EVENT_QUAD0_WDAT	 = 131,
+	CVMX_L2C_TAD_EVENT_QUAD1_INDEX	 = 144,
+	CVMX_L2C_TAD_EVENT_QUAD1_READ	 = 145,
+	CVMX_L2C_TAD_EVENT_QUAD1_BANK	 = 146,
+	CVMX_L2C_TAD_EVENT_QUAD1_WDAT	 = 147,
+	CVMX_L2C_TAD_EVENT_QUAD2_INDEX	 = 160,
+	CVMX_L2C_TAD_EVENT_QUAD2_READ	 = 161,
+	CVMX_L2C_TAD_EVENT_QUAD2_BANK	 = 162,
+	CVMX_L2C_TAD_EVENT_QUAD2_WDAT	 = 163,
+	CVMX_L2C_TAD_EVENT_QUAD3_INDEX	 = 176,
+	CVMX_L2C_TAD_EVENT_QUAD3_READ	 = 177,
+	CVMX_L2C_TAD_EVENT_QUAD3_BANK	 = 178,
+	CVMX_L2C_TAD_EVENT_QUAD3_WDAT	 = 179,
 	CVMX_L2C_TAD_EVENT_MAX
 };
 
@@ -159,10 +159,10 @@
  * Configure one of the four L2 Cache performance counters to capture event
  * occurrences.
  *
- * @counter:        The counter to configure. Range 0..3.
- * @event:          The type of L2 Cache event occurrence to count.
+ * @counter:	    The counter to configure. Range 0..3.
+ * @event:	    The type of L2 Cache event occurrence to count.
  * @clear_on_read:  When asserted, any read of the performance counter
- *                       clears the counter.
+ *			 clears the counter.
  *
  * @note The routine does not clear the counter.
  */
@@ -184,8 +184,8 @@
  * @core:  The core processor of interest.
  *
  * Returns    The mask specifying the partitioning. 0 bits in mask indicates
- *              the cache 'ways' that a core can evict from.
- *            -1 on error
+ *		the cache 'ways' that a core can evict from.
+ *	      -1 on error
  */
 int cvmx_l2c_get_core_way_partition(uint32_t core);
 
@@ -194,16 +194,16 @@
  *
  * @core: The core that the partitioning applies to.
  * @mask: The partitioning of the ways expressed as a binary
- *             mask. A 0 bit allows the core to evict cache lines from
- *             a way, while a 1 bit blocks the core from evicting any
- *             lines from that way. There must be at least one allowed
- *             way (0 bit) in the mask.
+ *	       mask. A 0 bit allows the core to evict cache lines from
+ *	       a way, while a 1 bit blocks the core from evicting any
+ *	       lines from that way. There must be at least one allowed
+ *	       way (0 bit) in the mask.
  *
 
  * @note If any ways are blocked for all cores and the HW blocks, then
- *       those ways will never have any cache lines evicted from them.
- *       All cores and the hardware blocks are free to read from all
- *       ways regardless of the partitioning.
+ *	 those ways will never have any cache lines evicted from them.
+ *	 All cores and the hardware blocks are free to read from all
+ *	 ways regardless of the partitioning.
  */
 int cvmx_l2c_set_core_way_partition(uint32_t core, uint32_t mask);
 
@@ -211,8 +211,8 @@
  * Return the L2 Cache way partitioning for the hw blocks.
  *
  * Returns    The mask specifying the reserved way. 0 bits in mask indicates
- *              the cache 'ways' that a core can evict from.
- *            -1 on error
+ *		the cache 'ways' that a core can evict from.
+ *	      -1 on error
  */
 int cvmx_l2c_get_hw_way_partition(void);
 
@@ -220,16 +220,16 @@
  * Partitions the L2 cache for the hardware blocks.
  *
  * @mask: The partitioning of the ways expressed as a binary
- *             mask. A 0 bit allows the core to evict cache lines from
- *             a way, while a 1 bit blocks the core from evicting any
- *             lines from that way. There must be at least one allowed
- *             way (0 bit) in the mask.
+ *	       mask. A 0 bit allows the core to evict cache lines from
+ *	       a way, while a 1 bit blocks the core from evicting any
+ *	       lines from that way. There must be at least one allowed
+ *	       way (0 bit) in the mask.
  *
 
  * @note If any ways are blocked for all cores and the HW blocks, then
- *       those ways will never have any cache lines evicted from them.
- *       All cores and the hardware blocks are free to read from all
- *       ways regardless of the partitioning.
+ *	 those ways will never have any cache lines evicted from them.
+ *	 All cores and the hardware blocks are free to read from all
+ *	 ways regardless of the partitioning.
  */
 int cvmx_l2c_set_hw_way_partition(uint32_t mask);
 
@@ -240,7 +240,7 @@
  * @addr:   physical address of line to lock
  *
  * Returns 0 on success,
- *         1 if line not locked.
+ *	   1 if line not locked.
  */
 int cvmx_l2c_lock_line(uint64_t addr);
 
@@ -258,7 +258,7 @@
  * @len:    Length (in bytes) of region to lock
  *
  * Returns Number of requested lines that where not locked.
- *         0 on success (all locked)
+ *	   0 on success (all locked)
  */
 int cvmx_l2c_lock_mem_region(uint64_t start, uint64_t len);
 
@@ -272,7 +272,7 @@
  * @address: Physical address to unlock
  *
  * Returns 0: line not unlocked
- *         1: line unlocked
+ *	   1: line unlocked
  */
 int cvmx_l2c_unlock_line(uint64_t address);
 
@@ -290,7 +290,7 @@
  * Read the L2 controller tag for a given location in L2
  *
  * @association:
- *               Which association to read line from
+ *		 Which association to read line from
  * @index:  Which way to read from.
  *
  * Returns l2c tag structure for line requested.
diff --git a/arch/mips/include/asm/octeon/cvmx-mdio.h b/arch/mips/include/asm/octeon/cvmx-mdio.h
index 6f0cd18..9f6a4f3 100644
--- a/arch/mips/include/asm/octeon/cvmx-mdio.h
+++ b/arch/mips/include/asm/octeon/cvmx-mdio.h
@@ -246,21 +246,21 @@
 } cvmx_mdio_phy_reg_mmd_address_data_t;
 
 /* Operating request encodings. */
-#define MDIO_CLAUSE_22_WRITE    0
-#define MDIO_CLAUSE_22_READ     1
+#define MDIO_CLAUSE_22_WRITE	0
+#define MDIO_CLAUSE_22_READ	1
 
-#define MDIO_CLAUSE_45_ADDRESS  0
-#define MDIO_CLAUSE_45_WRITE    1
+#define MDIO_CLAUSE_45_ADDRESS	0
+#define MDIO_CLAUSE_45_WRITE	1
 #define MDIO_CLAUSE_45_READ_INC 2
-#define MDIO_CLAUSE_45_READ     3
+#define MDIO_CLAUSE_45_READ	3
 
 /* MMD identifiers, mostly for accessing devices within XENPAK modules. */
-#define CVMX_MMD_DEVICE_PMA_PMD      1
-#define CVMX_MMD_DEVICE_WIS          2
-#define CVMX_MMD_DEVICE_PCS          3
-#define CVMX_MMD_DEVICE_PHY_XS       4
-#define CVMX_MMD_DEVICE_DTS_XS       5
-#define CVMX_MMD_DEVICE_TC           6
+#define CVMX_MMD_DEVICE_PMA_PMD	     1
+#define CVMX_MMD_DEVICE_WIS	     2
+#define CVMX_MMD_DEVICE_PCS	     3
+#define CVMX_MMD_DEVICE_PHY_XS	     4
+#define CVMX_MMD_DEVICE_DTS_XS	     5
+#define CVMX_MMD_DEVICE_TC	     6
 #define CVMX_MMD_DEVICE_CL22_EXT     29
 #define CVMX_MMD_DEVICE_VENDOR_1     30
 #define CVMX_MMD_DEVICE_VENDOR_2     31
@@ -291,7 +291,7 @@
  * registers controlling auto negotiation.
  *
  * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- *                 support multiple busses.
+ *		   support multiple busses.
  * @phy_id:   The MII phy id
  * @location: Register location to read
  *
@@ -328,13 +328,13 @@
  * registers controlling auto negotiation.
  *
  * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- *                 support multiple busses.
+ *		   support multiple busses.
  * @phy_id:   The MII phy id
  * @location: Register location to write
  * @val:      Value to write
  *
  * Returns -1 on error
- *         0 on success
+ *	   0 on success
  */
 static inline int cvmx_mdio_write(int bus_id, int phy_id, int location, int val)
 {
@@ -370,7 +370,7 @@
  * read PHY registers controlling auto negotiation.
  *
  * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- *                 support multiple busses.
+ *		   support multiple busses.
  * @phy_id:   The MII phy id
  * @device:   MDIO Managable Device (MMD) id
  * @location: Register location to read
@@ -407,7 +407,7 @@
 	} while (smi_wr.s.pending && --timeout);
 	if (timeout <= 0) {
 		cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
-			     "device %2d register %2d   TIME OUT(address)\n",
+			     "device %2d register %2d	TIME OUT(address)\n",
 		     bus_id, phy_id, device, location);
 		return -1;
 	}
@@ -425,7 +425,7 @@
 
 	if (timeout <= 0) {
 		cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
-			     "device %2d register %2d   TIME OUT(data)\n",
+			     "device %2d register %2d	TIME OUT(data)\n",
 		     bus_id, phy_id, device, location);
 		return -1;
 	}
@@ -434,7 +434,7 @@
 		return smi_rd.s.dat;
 	else {
 		cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
-			     "device %2d register %2d   INVALID READ\n",
+			     "device %2d register %2d	INVALID READ\n",
 		     bus_id, phy_id, device, location);
 		return -1;
 	}
@@ -445,14 +445,14 @@
  * write PHY registers controlling auto negotiation.
  *
  * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
- *                 support multiple busses.
+ *		   support multiple busses.
  * @phy_id:   The MII phy id
  * @device:   MDIO Managable Device (MMD) id
  * @location: Register location to write
  * @val:      Value to write
  *
  * Returns -1 on error
- *         0 on success
+ *	   0 on success
  */
 static inline int cvmx_mdio_45_write(int bus_id, int phy_id, int device,
 				     int location, int val)
diff --git a/arch/mips/include/asm/octeon/cvmx-pip-defs.h b/arch/mips/include/asm/octeon/cvmx-pip-defs.h
index 05a917d..e975c7d 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip-defs.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip-defs.h
@@ -44,7 +44,7 @@
 	 */
 	CVMX_PIP_PORT_CFG_MODE_SKIPL2 = 1ull,
 	/*
-	 * Input packets are assumed to be IP.  Results from non IP
+	 * Input packets are assumed to be IP.	Results from non IP
 	 * packets is undefined. Pointers reference the beginning of
 	 * the IP header.
 	 */
diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h
index 9e739a6..a76fe5a 100644
--- a/arch/mips/include/asm/octeon/cvmx-pip.h
+++ b/arch/mips/include/asm/octeon/cvmx-pip.h
@@ -37,8 +37,8 @@
 #include <asm/octeon/cvmx-fpa.h>
 #include <asm/octeon/cvmx-pip-defs.h>
 
-#define CVMX_PIP_NUM_INPUT_PORTS                40
-#define CVMX_PIP_NUM_WATCHERS                   4
+#define CVMX_PIP_NUM_INPUT_PORTS		40
+#define CVMX_PIP_NUM_WATCHERS			4
 
 /*
  * Encodes the different error and exception codes
@@ -92,10 +92,10 @@
 
 /**
  * NOTES
- *       late collision (data received before collision)
- *            late collisions cannot be detected by the receiver
- *            they would appear as JAM bits which would appear as bad FCS
- *            or carrier extend error which is CVMX_PIP_EXTEND_ERR
+ *	 late collision (data received before collision)
+ *	      late collisions cannot be detected by the receiver
+ *	      they would appear as JAM bits which would appear as bad FCS
+ *	      or carrier extend error which is CVMX_PIP_EXTEND_ERR
  */
 typedef enum {
 	/* No error */
@@ -122,11 +122,11 @@
 	 * error)
 	 */
 	CVMX_PIP_UNDER_FCS_ERR = 6ull,
-	/* RGM     7 = FCS error */
+	/* RGM	   7 = FCS error */
 	CVMX_PIP_GMX_FCS_ERR = 7ull,
 	/* RGM+SPI 8 = min frame error (pkt len < min frame len) */
 	CVMX_PIP_UNDER_ERR = 8ull,
-	/* RGM     9 = Frame carrier extend error */
+	/* RGM	   9 = Frame carrier extend error */
 	CVMX_PIP_EXTEND_ERR = 9ull,
 	/*
 	 * RGM 10 = length mismatch (len did not match len in L2
@@ -161,10 +161,10 @@
 	CVMX_PIP_PIP_L2_MAL_HDR = 18L
 	/*
 	 * NOTES: xx = late collision (data received before collision)
-	 *       late collisions cannot be detected by the receiver
-	 *       they would appear as JAM bits which would appear as
-	 *       bad FCS or carrier extend error which is
-	 *       CVMX_PIP_EXTEND_ERR
+	 *	 late collisions cannot be detected by the receiver
+	 *	 they would appear as JAM bits which would appear as
+	 *	 bad FCS or carrier extend error which is
+	 *	 CVMX_PIP_EXTEND_ERR
 	 */
 } cvmx_pip_rcv_err_t;
 
@@ -192,13 +192,13 @@
 	/* Number of packets processed by PIP */
 	uint32_t packets;
 	/*
-	 * Number of indentified L2 multicast packets.  Does not
+	 * Number of indentified L2 multicast packets.	Does not
 	 * include broadcast packets.  Only includes packets whose
 	 * parse mode is SKIP_TO_L2
 	 */
 	uint32_t multicast_packets;
 	/*
-	 * Number of indentified L2 broadcast packets.  Does not
+	 * Number of indentified L2 broadcast packets.	Does not
 	 * include multicast packets.  Only includes packets whose
 	 * parse mode is SKIP_TO_L2
 	 */
@@ -287,7 +287,7 @@
  * @port_num: Port number to configure
  * @port_cfg: Port hardware configuration
  * @port_tag_cfg:
- *                 Port POW tagging configuration
+ *		   Port POW tagging configuration
  */
 static inline void cvmx_pip_config_port(uint64_t port_num,
 					union cvmx_pip_prt_cfgx port_cfg,
@@ -298,20 +298,20 @@
 }
 #if 0
 /**
- * @deprecated      This function is a thin wrapper around the Pass1 version
- *                  of the CVMX_PIP_QOS_WATCHX CSR; Pass2 has added a field for
- *                  setting the group that is incompatible with this function,
- *                  the preferred upgrade path is to use the CSR directly.
+ * @deprecated	    This function is a thin wrapper around the Pass1 version
+ *		    of the CVMX_PIP_QOS_WATCHX CSR; Pass2 has added a field for
+ *		    setting the group that is incompatible with this function,
+ *		    the preferred upgrade path is to use the CSR directly.
  *
  * Configure the global QoS packet watchers. Each watcher is
  * capable of matching a field in a packet to determine the
  * QoS queue for scheduling.
  *
- * @watcher:    Watcher number to configure (0 - 3).
+ * @watcher:	Watcher number to configure (0 - 3).
  * @match_type: Watcher match type
  * @match_value:
- *                   Value the watcher will match against
- * @qos:        QoS queue for packets matching this watcher
+ *		     Value the watcher will match against
+ * @qos:	QoS queue for packets matching this watcher
  */
 static inline void cvmx_pip_config_watcher(uint64_t watcher,
 					   cvmx_pip_qos_watch_types match_type,
@@ -331,7 +331,7 @@
  * Configure the VLAN priority to QoS queue mapping.
  *
  * @vlan_priority:
- *               VLAN priority (0-7)
+ *		 VLAN priority (0-7)
  * @qos:    QoS queue for packets matching this watcher
  */
 static inline void cvmx_pip_config_vlan_qos(uint64_t vlan_priority,
@@ -451,10 +451,10 @@
  *
  * @interface: Interface to configure (0 or 1)
  * @invert_result:
- *                 Invert the result of the CRC
+ *		   Invert the result of the CRC
  * @reflect:  Reflect
  * @initialization_vector:
- *                 CRC initialization vector
+ *		   CRC initialization vector
  */
 static inline void cvmx_pip_config_crc(uint64_t interface,
 				       uint64_t invert_result, uint64_t reflect,
@@ -500,13 +500,13 @@
  *
  * @mask_index: Which tag mask to modify (0..3)
  * @offset: Offset into the bitmask to set bits at. Use the GCC macro
- *          offsetof() to determine the offsets into packet headers.
- *          For example, offsetof(ethhdr, protocol) returns the offset
- *          of the ethernet protocol field.  The bitmask selects which
- *          bytes to include the the tag, with bit offset X selecting
- *          byte at offset X from the beginning of the packet data.
+ *	    offsetof() to determine the offsets into packet headers.
+ *	    For example, offsetof(ethhdr, protocol) returns the offset
+ *	    of the ethernet protocol field.  The bitmask selects which
+ *	    bytes to include the the tag, with bit offset X selecting
+ *	    byte at offset X from the beginning of the packet data.
  * @len:    Number of bytes to include. Usually this is the sizeof()
- *          the field.
+ *	    the field.
  */
 static inline void cvmx_pip_tag_mask_set(uint64_t mask_index, uint64_t offset,
 					 uint64_t len)
diff --git a/arch/mips/include/asm/octeon/cvmx-pko.h b/arch/mips/include/asm/octeon/cvmx-pko.h
index c6daeed..f7d2a67 100644
--- a/arch/mips/include/asm/octeon/cvmx-pko.h
+++ b/arch/mips/include/asm/octeon/cvmx-pko.h
@@ -69,16 +69,16 @@
 #define CVMX_PKO_COMMAND_BUFFER_SIZE_ADJUST (1)
 
 #define CVMX_PKO_MAX_OUTPUT_QUEUES_STATIC 256
-#define CVMX_PKO_MAX_OUTPUT_QUEUES      ((OCTEON_IS_MODEL(OCTEON_CN31XX) || \
+#define CVMX_PKO_MAX_OUTPUT_QUEUES	((OCTEON_IS_MODEL(OCTEON_CN31XX) || \
 	OCTEON_IS_MODEL(OCTEON_CN3010) || OCTEON_IS_MODEL(OCTEON_CN3005) || \
 	OCTEON_IS_MODEL(OCTEON_CN50XX)) ? 32 : \
 		(OCTEON_IS_MODEL(OCTEON_CN58XX) || \
 		OCTEON_IS_MODEL(OCTEON_CN56XX)) ? 256 : 128)
-#define CVMX_PKO_NUM_OUTPUT_PORTS       40
+#define CVMX_PKO_NUM_OUTPUT_PORTS	40
 /* use this for queues that are not used */
 #define CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID 63
-#define CVMX_PKO_QUEUE_STATIC_PRIORITY  9
-#define CVMX_PKO_ILLEGAL_QUEUE  0xFFFF
+#define CVMX_PKO_QUEUE_STATIC_PRIORITY	9
+#define CVMX_PKO_ILLEGAL_QUEUE	0xFFFF
 #define CVMX_PKO_MAX_QUEUE_DEPTH 0
 
 typedef enum {
@@ -269,13 +269,13 @@
 /**
  * Configure a output port and the associated queues for use.
  *
- * @port:       Port to configure.
+ * @port:	Port to configure.
  * @base_queue: First queue number to associate with this port.
  * @num_queues: Number of queues t oassociate with this port
- * @priority:   Array of priority levels for each queue. Values are
- *                   allowed to be 1-8. A value of 8 get 8 times the traffic
- *                   of a value of 1. There must be num_queues elements in the
- *                   array.
+ * @priority:	Array of priority levels for each queue. Values are
+ *		     allowed to be 1-8. A value of 8 get 8 times the traffic
+ *		     of a value of 1. There must be num_queues elements in the
+ *		     array.
  */
 extern cvmx_pko_status_t cvmx_pko_config_port(uint64_t port,
 					      uint64_t base_queue,
@@ -285,7 +285,7 @@
 /**
  * Ring the packet output doorbell. This tells the packet
  * output hardware that "len" command words have been added
- * to its pending list.  This command includes the required
+ * to its pending list.	 This command includes the required
  * CVMX_SYNCWS before the doorbell ring.
  *
  * @port:   Port the packet is for
@@ -322,18 +322,18 @@
  * The use_locking parameter allows the caller to use three
  * possible locking modes.
  * - CVMX_PKO_LOCK_NONE
- *      - PKO doesn't do any locking. It is the responsibility
- *          of the application to make sure that no other core
- *          is accessing the same queue at the same time.
+ *	- PKO doesn't do any locking. It is the responsibility
+ *	    of the application to make sure that no other core
+ *	    is accessing the same queue at the same time.
  * - CVMX_PKO_LOCK_ATOMIC_TAG
- *      - PKO performs an atomic tagswitch to insure exclusive
- *          access to the output queue. This will maintain
- *          packet ordering on output.
+ *	- PKO performs an atomic tagswitch to insure exclusive
+ *	    access to the output queue. This will maintain
+ *	    packet ordering on output.
  * - CVMX_PKO_LOCK_CMD_QUEUE
- *      - PKO uses the common command queue locks to insure
- *          exclusive access to the output queue. This is a
- *          memory based ll/sc. This is the most portable
- *          locking mechanism.
+ *	- PKO uses the common command queue locks to insure
+ *	    exclusive access to the output queue. This is a
+ *	    memory based ll/sc. This is the most portable
+ *	    locking mechanism.
  *
  * NOTE: If atomic locking is used, the POW entry CANNOT be
  * descheduled, as it does not contain a valid WQE pointer.
@@ -341,7 +341,7 @@
  * @port:   Port to send it on
  * @queue:  Queue to use
  * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or
- *               CVMX_PKO_LOCK_CMD_QUEUE
+ *		 CVMX_PKO_LOCK_CMD_QUEUE
  */
 
 static inline void cvmx_pko_send_packet_prepare(uint64_t port, uint64_t queue,
@@ -351,11 +351,11 @@
 		/*
 		 * Must do a full switch here to handle all cases.  We
 		 * use a fake WQE pointer, as the POW does not access
-		 * this memory.  The WQE pointer and group are only
+		 * this memory.	 The WQE pointer and group are only
 		 * used if this work is descheduled, which is not
 		 * supported by the
 		 * cvmx_pko_send_packet_prepare/cvmx_pko_send_packet_finish
-		 * combination.  Note that this is a special case in
+		 * combination.	 Note that this is a special case in
 		 * which these fake values can be used - this is not a
 		 * general technique.
 		 */
@@ -377,10 +377,10 @@
  * @port:   Port to send it on
  * @queue:  Queue to use
  * @pko_command:
- *               PKO HW command word
+ *		 PKO HW command word
  * @packet: Packet to send
  * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or
- *               CVMX_PKO_LOCK_CMD_QUEUE
+ *		 CVMX_PKO_LOCK_CMD_QUEUE
  *
  * Returns returns CVMX_PKO_SUCCESS on success, or error code on
  * failure of output
@@ -418,12 +418,12 @@
  * @port:   Port to send it on
  * @queue:  Queue to use
  * @pko_command:
- *               PKO HW command word
+ *		 PKO HW command word
  * @packet: Packet to send
  * @addr: Plysical address of a work queue entry or physical address
- *        to zero on complete.
+ *	  to zero on complete.
  * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or
- *               CVMX_PKO_LOCK_CMD_QUEUE
+ *		 CVMX_PKO_LOCK_CMD_QUEUE
  *
  * Returns returns CVMX_PKO_SUCCESS on success, or error code on
  * failure of output
@@ -588,7 +588,7 @@
  * @port:      Port to rate limit
  * @packets_s: Maximum packet/sec
  * @burst:     Maximum number of packets to burst in a row before rate
- *                  limiting cuts in.
+ *		    limiting cuts in.
  *
  * Returns Zero on success, negative on failure
  */
@@ -601,7 +601,7 @@
  * @port:   Port to rate limit
  * @bits_s: PKO rate limit in bits/sec
  * @burst:  Maximum number of bits to burst before rate
- *               limiting cuts in.
+ *		 limiting cuts in.
  *
  * Returns Zero on success, negative on failure
  */
diff --git a/arch/mips/include/asm/octeon/cvmx-pow.h b/arch/mips/include/asm/octeon/cvmx-pow.h
index 92742b2..4b4d0ec 100644
--- a/arch/mips/include/asm/octeon/cvmx-pow.h
+++ b/arch/mips/include/asm/octeon/cvmx-pow.h
@@ -70,7 +70,7 @@
 	 * The work queue entry from the order - NEVER tag switch from
 	 * NULL to NULL
 	 */
-	CVMX_POW_TAG_TYPE_NULL      = 2L,
+	CVMX_POW_TAG_TYPE_NULL	    = 2L,
 	/* A tag switch to NULL, and there is no space reserved in POW
 	 * - NEVER tag switch to NULL_NULL
 	 * - NEVER tag switch from NULL_NULL
@@ -90,7 +90,7 @@
 } cvmx_pow_wait_t;
 
 /**
- *  POW tag operations.  These are used in the data stored to the POW.
+ *  POW tag operations.	 These are used in the data stored to the POW.
  */
 typedef enum {
 	/*
@@ -341,14 +341,14 @@
 		 * lists.  The two memory-input queue lists associated
 		 * with each QOS level are:
 		 *
-		 * - qosgrp = 0, qosgrp = 8:      QOS0
-		 * - qosgrp = 1, qosgrp = 9:      QOS1
-		 * - qosgrp = 2, qosgrp = 10:     QOS2
-		 * - qosgrp = 3, qosgrp = 11:     QOS3
-		 * - qosgrp = 4, qosgrp = 12:     QOS4
-		 * - qosgrp = 5, qosgrp = 13:     QOS5
-		 * - qosgrp = 6, qosgrp = 14:     QOS6
-		 * - qosgrp = 7, qosgrp = 15:     QOS7
+		 * - qosgrp = 0, qosgrp = 8:	  QOS0
+		 * - qosgrp = 1, qosgrp = 9:	  QOS1
+		 * - qosgrp = 2, qosgrp = 10:	  QOS2
+		 * - qosgrp = 3, qosgrp = 11:	  QOS3
+		 * - qosgrp = 4, qosgrp = 12:	  QOS4
+		 * - qosgrp = 5, qosgrp = 13:	  QOS5
+		 * - qosgrp = 6, qosgrp = 14:	  QOS6
+		 * - qosgrp = 7, qosgrp = 15:	  QOS7
 		 */
 		uint64_t qosgrp:4;
 		/*
@@ -942,11 +942,11 @@
  *  operations.
  *
  *  NOTE: The following is the behavior of the pending switch bit at the PP
- *       for POW stores (i.e. when did<7:3> == 0xc)
- *     - did<2:0> == 0      => pending switch bit is set
- *     - did<2:0> == 1      => no affect on the pending switch bit
- *     - did<2:0> == 3      => pending switch bit is cleared
- *     - did<2:0> == 7      => no affect on the pending switch bit
+ *	 for POW stores (i.e. when did<7:3> == 0xc)
+ *     - did<2:0> == 0	    => pending switch bit is set
+ *     - did<2:0> == 1	    => no affect on the pending switch bit
+ *     - did<2:0> == 3	    => pending switch bit is cleared
+ *     - did<2:0> == 7	    => no affect on the pending switch bit
  *     - did<2:0> == others => must not be used
  *     - No other loads/stores have an affect on the pending switch bit
  *     - The switch bus from POW can clear the pending switch bit
@@ -1053,7 +1053,7 @@
 }
 
 #ifndef CVMX_MF_CHORD
-#define CVMX_MF_CHORD(dest)         CVMX_RDHWR(dest, 30)
+#define CVMX_MF_CHORD(dest)	    CVMX_RDHWR(dest, 30)
 #endif
 
 /**
@@ -1097,7 +1097,7 @@
  * so the caller must ensure that there is not a pending tag switch.
  *
  * @wait:   When set, call stalls until work becomes avaiable, or times out.
- *               If not set, returns immediately.
+ *		 If not set, returns immediately.
  *
  * Returns Returns the WQE pointer from POW. Returns NULL if no work
  * was available.
@@ -1131,7 +1131,7 @@
  * requesting the new work.
  *
  * @wait:   When set, call stalls until work becomes avaiable, or times out.
- *               If not set, returns immediately.
+ *		 If not set, returns immediately.
  *
  * Returns Returns the WQE pointer from POW. Returns NULL if no work
  * was available.
@@ -1148,7 +1148,7 @@
 }
 
 /**
- * Synchronous null_rd request.  Requests a switch out of NULL_NULL POW state.
+ * Synchronous null_rd request.	 Requests a switch out of NULL_NULL POW state.
  * This function waits for any previous tag switch to complete before
  * requesting the null_rd.
  *
@@ -1183,11 +1183,11 @@
  * there is not a pending tag switch.
  *
  * @scr_addr: Scratch memory address that response will be returned
- *            to, which is either a valid WQE, or a response with the
- *            invalid bit set.  Byte address, must be 8 byte aligned.
+ *	      to, which is either a valid WQE, or a response with the
+ *	      invalid bit set.	Byte address, must be 8 byte aligned.
  *
  * @wait: 1 to cause response to wait for work to become available (or
- *        timeout), 0 to cause response to return immediately
+ *	  timeout), 0 to cause response to return immediately
  */
 static inline void cvmx_pow_work_request_async_nocheck(int scr_addr,
 						       cvmx_pow_wait_t wait)
@@ -1212,11 +1212,11 @@
  * tag switch to complete before requesting the new work.
  *
  * @scr_addr: Scratch memory address that response will be returned
- *            to, which is either a valid WQE, or a response with the
- *            invalid bit set.  Byte address, must be 8 byte aligned.
+ *	      to, which is either a valid WQE, or a response with the
+ *	      invalid bit set.	Byte address, must be 8 byte aligned.
  *
  * @wait: 1 to cause response to wait for work to become available (or
- *                  timeout), 0 to cause response to return immediately
+ *		    timeout), 0 to cause response to return immediately
  */
 static inline void cvmx_pow_work_request_async(int scr_addr,
 					       cvmx_pow_wait_t wait)
@@ -1234,7 +1234,7 @@
  * to wait for the response.
  *
  * @scr_addr: Scratch memory address to get result from Byte address,
- *            must be 8 byte aligned.
+ *	      must be 8 byte aligned.
  *
  * Returns Returns the WQE from the scratch register, or NULL if no
  * work was available.
@@ -1260,7 +1260,7 @@
  * @wqe_ptr: pointer to a work queue entry returned by the POW
  *
  * Returns 0 if pointer is valid
- *         1 if invalid (no work was returned)
+ *	   1 if invalid (no work was returned)
  */
 static inline uint64_t cvmx_pow_work_invalid(cvmx_wqe_t *wqe_ptr)
 {
@@ -1314,7 +1314,7 @@
 	/*
 	 * Note that WQE in DRAM is not updated here, as the POW does
 	 * not read from DRAM once the WQE is in flight.  See hardware
-	 * manual for complete details.  It is the application's
+	 * manual for complete details.	 It is the application's
 	 * responsibility to keep track of the current tag value if
 	 * that is important.
 	 */
@@ -1361,7 +1361,7 @@
 	/*
 	 * Note that WQE in DRAM is not updated here, as the POW does
 	 * not read from DRAM once the WQE is in flight.  See hardware
-	 * manual for complete details.  It is the application's
+	 * manual for complete details.	 It is the application's
 	 * responsibility to keep track of the current tag value if
 	 * that is important.
 	 */
@@ -1390,7 +1390,7 @@
  * previous tag switch has completed.
  *
  * @wqp:      pointer to work queue entry to submit.  This entry is
- *            updated to match the other parameters
+ *	      updated to match the other parameters
  * @tag:      tag value to be assigned to work queue entry
  * @tag_type: type of tag
  * @group:    group value for the work queue entry.
@@ -1429,7 +1429,7 @@
 	/*
 	 * Note that WQE in DRAM is not updated here, as the POW does
 	 * not read from DRAM once the WQE is in flight.  See hardware
-	 * manual for complete details.  It is the application's
+	 * manual for complete details.	 It is the application's
 	 * responsibility to keep track of the current tag value if
 	 * that is important.
 	 */
@@ -1468,10 +1468,10 @@
  * before requesting the tag switch.
  *
  * @wqp:      pointer to work queue entry to submit.  This entry is updated
- *            to match the other parameters
+ *	      to match the other parameters
  * @tag:      tag value to be assigned to work queue entry
  * @tag_type: type of tag
- * @group:      group value for the work queue entry.
+ * @group:	group value for the work queue entry.
  */
 static inline void cvmx_pow_tag_sw_full(cvmx_wqe_t *wqp, uint32_t tag,
 					enum cvmx_pow_tag_type tag_type,
@@ -1560,7 +1560,7 @@
  * unrelated to the tag that the core currently holds.
  *
  * @wqp:      pointer to work queue entry to submit.  This entry is
- *            updated to match the other parameters
+ *	      updated to match the other parameters
  * @tag:      tag value to be assigned to work queue entry
  * @tag_type: type of tag
  * @qos:      Input queue to add to.
@@ -1592,7 +1592,7 @@
 	ptr.sio.offset = cvmx_ptr_to_phys(wqp);
 
 	/*
-	 * SYNC write to memory before the work submit.  This is
+	 * SYNC write to memory before the work submit.	 This is
 	 * necessary as POW may read values from DRAM at this time.
 	 */
 	CVMX_SYNCWS;
@@ -1604,11 +1604,11 @@
  * indicates which groups each core will accept work from. There are
  * 16 groups.
  *
- * @core_num:   core to apply mask to
+ * @core_num:	core to apply mask to
  * @mask:   Group mask. There are 16 groups, so only bits 0-15 are valid,
- *               representing groups 0-15.
- *               Each 1 bit in the mask enables the core to accept work from
- *               the corresponding group.
+ *		 representing groups 0-15.
+ *		 Each 1 bit in the mask enables the core to accept work from
+ *		 the corresponding group.
  */
 static inline void cvmx_pow_set_group_mask(uint64_t core_num, uint64_t mask)
 {
@@ -1623,14 +1623,14 @@
  * This function sets POW static priorities for a core. Each input queue has
  * an associated priority value.
  *
- * @core_num:   core to apply priorities to
- * @priority:   Vector of 8 priorities, one per POW Input Queue (0-7).
- *                   Highest priority is 0 and lowest is 7. A priority value
- *                   of 0xF instructs POW to skip the Input Queue when
- *                   scheduling to this specific core.
- *                   NOTE: priorities should not have gaps in values, meaning
- *                         {0,1,1,1,1,1,1,1} is a valid configuration while
- *                         {0,2,2,2,2,2,2,2} is not.
+ * @core_num:	core to apply priorities to
+ * @priority:	Vector of 8 priorities, one per POW Input Queue (0-7).
+ *		     Highest priority is 0 and lowest is 7. A priority value
+ *		     of 0xF instructs POW to skip the Input Queue when
+ *		     scheduling to this specific core.
+ *		     NOTE: priorities should not have gaps in values, meaning
+ *			   {0,1,1,1,1,1,1,1} is a valid configuration while
+ *			   {0,2,2,2,2,2,2,2} is not.
  */
 static inline void cvmx_pow_set_priority(uint64_t core_num,
 					 const uint8_t priority[])
@@ -1708,8 +1708,8 @@
  * @tag_type: New tag type
  * @group:    New group value
  * @no_sched: Control whether this work queue entry will be rescheduled.
- *                 - 1 : don't schedule this work
- *                 - 0 : allow this work to be scheduled.
+ *		   - 1 : don't schedule this work
+ *		   - 0 : allow this work to be scheduled.
  */
 static inline void cvmx_pow_tag_sw_desched_nocheck(
 	uint32_t tag,
@@ -1794,8 +1794,8 @@
  * @tag_type: New tag type
  * @group:    New group value
  * @no_sched: Control whether this work queue entry will be rescheduled.
- *                 - 1 : don't schedule this work
- *                 - 0 : allow this work to be scheduled.
+ *		   - 1 : don't schedule this work
+ *		   - 0 : allow this work to be scheduled.
  */
 static inline void cvmx_pow_tag_sw_desched(uint32_t tag,
 					   enum cvmx_pow_tag_type tag_type,
@@ -1819,8 +1819,8 @@
  * Descchedules the current work queue entry.
  *
  * @no_sched: no schedule flag value to be set on the work queue
- *            entry.  If this is set the entry will not be
- *            rescheduled.
+ *	      entry.  If this is set the entry will not be
+ *	      rescheduled.
  */
 static inline void cvmx_pow_desched(uint64_t no_sched)
 {
@@ -1863,7 +1863,7 @@
 *****************************************************/
 
 /*
- * Number of bits of the tag used by software.  The SW bits are always
+ * Number of bits of the tag used by software.	The SW bits are always
  * a contiguous block of the high starting at bit 31.  The hardware
  * bits are always the low bits.  By default, the top 8 bits of the
  * tag are reserved for software, and the low 24 are set by the IPD
@@ -1890,7 +1890,7 @@
  * are defined here.
  */
 /* Mask for the value portion of the tag */
-#define CVMX_TAG_SUBGROUP_MASK  0xFFFF
+#define CVMX_TAG_SUBGROUP_MASK	0xFFFF
 #define CVMX_TAG_SUBGROUP_SHIFT 16
 #define CVMX_TAG_SUBGROUP_PKO  0x1
 
@@ -1905,12 +1905,12 @@
  * This function creates a 32 bit tag value from the two values provided.
  *
  * @sw_bits: The upper bits (number depends on configuration) are set
- *           to this value.  The remainder of bits are set by the
- *           hw_bits parameter.
+ *	     to this value.  The remainder of bits are set by the
+ *	     hw_bits parameter.
  *
  * @hw_bits: The lower bits (number depends on configuration) are set
- *           to this value.  The remainder of bits are set by the
- *           sw_bits parameter.
+ *	     to this value.  The remainder of bits are set by the
+ *	     sw_bits parameter.
  *
  * Returns 32 bit value of the combined hw and sw bits.
  */
@@ -1957,7 +1957,7 @@
  *
  * @buffer: Buffer to store capture into
  * @buffer_size:
- *               The size of the supplied buffer
+ *		 The size of the supplied buffer
  *
  * Returns Zero on success, negative on failure
  */
@@ -1968,7 +1968,7 @@
  *
  * @buffer: POW capture from cvmx_pow_capture()
  * @buffer_size:
- *               Size of the buffer
+ *		 Size of the buffer
  */
 extern void cvmx_pow_display(void *buffer, int buffer_size);
 
diff --git a/arch/mips/include/asm/octeon/cvmx-scratch.h b/arch/mips/include/asm/octeon/cvmx-scratch.h
index 96b70cf..8d21cc5 100644
--- a/arch/mips/include/asm/octeon/cvmx-scratch.h
+++ b/arch/mips/include/asm/octeon/cvmx-scratch.h
@@ -39,7 +39,7 @@
  * Note: This define must be a long, not a long long in order to
  * compile without warnings for both 32bit and 64bit.
  */
-#define CVMX_SCRATCH_BASE       (-32768l)	/* 0xffffffffffff8000 */
+#define CVMX_SCRATCH_BASE	(-32768l)	/* 0xffffffffffff8000 */
 
 /**
  * Reads an 8 bit value from the processor local scratchpad memory.
diff --git a/arch/mips/include/asm/octeon/cvmx-spi.h b/arch/mips/include/asm/octeon/cvmx-spi.h
index 3bf53b5..d5038cc 100644
--- a/arch/mips/include/asm/octeon/cvmx-spi.h
+++ b/arch/mips/include/asm/octeon/cvmx-spi.h
@@ -84,11 +84,11 @@
  * Initialize and start the SPI interface.
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  * @num_ports: Number of SPI ports to configure
  *
@@ -102,11 +102,11 @@
  * with its corespondant system.
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  * Returns Zero on success, negative of failure.
  */
@@ -154,7 +154,7 @@
 /**
  * Get current SPI4 initialization callbacks
  *
- * @callbacks:  Pointer to the callbacks structure.to fill
+ * @callbacks:	Pointer to the callbacks structure.to fill
  *
  * Returns Pointer to cvmx_spi_callbacks_t structure.
  */
@@ -171,11 +171,11 @@
  * Callback to perform SPI4 reset
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  *
  * Returns Zero on success, non-zero error code on failure (will cause
  * SPI initialization to abort)
@@ -187,11 +187,11 @@
  * detection
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @num_ports: Number of ports to configure on SPI
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -204,11 +204,11 @@
  * Callback to perform clock detection
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -221,11 +221,11 @@
  * Callback to perform link training
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for link to be trained (in seconds)
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -238,11 +238,11 @@
  * Callback to perform calendar data synchronization
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for calendar data in seconds
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -255,11 +255,11 @@
  * Callback to handle interface up
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  *
  * Returns Zero on success, non-zero error code on failure (will cause
  * SPI initialization to abort)
diff --git a/arch/mips/include/asm/octeon/cvmx-spinlock.h b/arch/mips/include/asm/octeon/cvmx-spinlock.h
index a672abb..4f09cff 100644
--- a/arch/mips/include/asm/octeon/cvmx-spinlock.h
+++ b/arch/mips/include/asm/octeon/cvmx-spinlock.h
@@ -26,7 +26,7 @@
  ***********************license end**************************************/
 
 /**
- * Implementation of spinlocks for Octeon CVMX.  Although similar in
+ * Implementation of spinlocks for Octeon CVMX.	 Although similar in
  * function to Linux kernel spinlocks, they are not compatible.
  * Octeon CVMX spinlocks are only used to synchronize with the boot
  * monitor and other non-Linux programs running in the system.
@@ -50,8 +50,8 @@
 } cvmx_spinlock_t;
 
 /* note - macros not expanded in inline ASM, so values hardcoded */
-#define  CVMX_SPINLOCK_UNLOCKED_VAL  0
-#define  CVMX_SPINLOCK_LOCKED_VAL    1
+#define	 CVMX_SPINLOCK_UNLOCKED_VAL  0
+#define	 CVMX_SPINLOCK_LOCKED_VAL    1
 
 #define CVMX_SPINLOCK_UNLOCKED_INITIALIZER  {CVMX_SPINLOCK_UNLOCKED_VAL}
 
@@ -96,7 +96,7 @@
  * @lock:   pointer to lock structure
  *
  * Returns 0: lock successfully taken
- *         1: lock not taken, held by someone else
+ *	   1: lock not taken, held by someone else
  * These return values match the Linux semantics.
  */
 
@@ -104,16 +104,16 @@
 {
 	unsigned int tmp;
 
-	__asm__ __volatile__(".set noreorder         \n"
+	__asm__ __volatile__(".set noreorder	     \n"
 			     "1: ll   %[tmp], %[val] \n"
 			/* if lock held, fail immediately */
-			     "   bnez %[tmp], 2f     \n"
-			     "   li   %[tmp], 1      \n"
-			     "   sc   %[tmp], %[val] \n"
-			     "   beqz %[tmp], 1b     \n"
-			     "   li   %[tmp], 0      \n"
-			     "2:                     \n"
-			     ".set reorder           \n" :
+			     "	 bnez %[tmp], 2f     \n"
+			     "	 li   %[tmp], 1	     \n"
+			     "	 sc   %[tmp], %[val] \n"
+			     "	 beqz %[tmp], 1b     \n"
+			     "	 li   %[tmp], 0	     \n"
+			     "2:		     \n"
+			     ".set reorder	     \n" :
 			[val] "+m"(lock->value), [tmp] "=&r"(tmp)
 			     : : "memory");
 
@@ -129,14 +129,14 @@
 {
 	unsigned int tmp;
 
-	__asm__ __volatile__(".set noreorder         \n"
+	__asm__ __volatile__(".set noreorder	     \n"
 			     "1: ll   %[tmp], %[val]  \n"
-			     "   bnez %[tmp], 1b     \n"
-			     "   li   %[tmp], 1      \n"
-			     "   sc   %[tmp], %[val] \n"
-			     "   beqz %[tmp], 1b     \n"
-			     "   nop                \n"
-			     ".set reorder           \n" :
+			     "	 bnez %[tmp], 1b     \n"
+			     "	 li   %[tmp], 1	     \n"
+			     "	 sc   %[tmp], %[val] \n"
+			     "	 beqz %[tmp], 1b     \n"
+			     "	 nop		    \n"
+			     ".set reorder	     \n" :
 			[val] "+m"(lock->value), [tmp] "=&r"(tmp)
 			: : "memory");
 
@@ -163,17 +163,17 @@
 	unsigned int tmp;
 	unsigned int sav;
 
-	__asm__ __volatile__(".set noreorder         \n"
-			     ".set noat              \n"
+	__asm__ __volatile__(".set noreorder	     \n"
+			     ".set noat		     \n"
 			     "1: ll    %[tmp], %[val]  \n"
-			     "   bbit1 %[tmp], 31, 1b    \n"
-			     "   li    $at, 1      \n"
-			     "   ins   %[tmp], $at, 31, 1  \n"
-			     "   sc    %[tmp], %[val] \n"
-			     "   beqz  %[tmp], 1b     \n"
-			     "   nop                \n"
-			     ".set at              \n"
-			     ".set reorder           \n" :
+			     "	 bbit1 %[tmp], 31, 1b	 \n"
+			     "	 li    $at, 1	   \n"
+			     "	 ins   %[tmp], $at, 31, 1  \n"
+			     "	 sc    %[tmp], %[val] \n"
+			     "	 beqz  %[tmp], 1b     \n"
+			     "	 nop		    \n"
+			     ".set at		   \n"
+			     ".set reorder	     \n" :
 			[val] "+m"(*word), [tmp] "=&r"(tmp), [sav] "=&r"(sav)
 			     : : "memory");
 
@@ -187,7 +187,7 @@
  *
  * @word:  word to lock bit 31 of
  * Returns 0: lock successfully taken
- *         1: lock not taken, held by someone else
+ *	   1: lock not taken, held by someone else
  * These return values match the Linux semantics.
  */
 static inline unsigned int cvmx_spinlock_bit_trylock(uint32_t *word)
@@ -198,15 +198,15 @@
 			     ".set noat\n"
 			     "1: ll    %[tmp], %[val] \n"
 			/* if lock held, fail immediately */
-			     "   bbit1 %[tmp], 31, 2f     \n"
-			     "   li    $at, 1      \n"
-			     "   ins   %[tmp], $at, 31, 1  \n"
-			     "   sc    %[tmp], %[val] \n"
-			     "   beqz  %[tmp], 1b     \n"
-			     "   li    %[tmp], 0      \n"
-			     "2:                     \n"
-			     ".set at              \n"
-			     ".set reorder           \n" :
+			     "	 bbit1 %[tmp], 31, 2f	  \n"
+			     "	 li    $at, 1	   \n"
+			     "	 ins   %[tmp], $at, 31, 1  \n"
+			     "	 sc    %[tmp], %[val] \n"
+			     "	 beqz  %[tmp], 1b     \n"
+			     "	 li    %[tmp], 0      \n"
+			     "2:		     \n"
+			     ".set at		   \n"
+			     ".set reorder	     \n" :
 			[val] "+m"(*word), [tmp] "=&r"(tmp)
 			: : "memory");
 
diff --git a/arch/mips/include/asm/octeon/cvmx-sysinfo.h b/arch/mips/include/asm/octeon/cvmx-sysinfo.h
index 61dd574..2131197 100644
--- a/arch/mips/include/asm/octeon/cvmx-sysinfo.h
+++ b/arch/mips/include/asm/octeon/cvmx-sysinfo.h
@@ -85,7 +85,7 @@
 	char board_serial_number[OCTEON_SERIAL_LEN];
 	/*
 	 * Several boards support compact flash on the Octeon boot
-	 * bus.  The CF memory spaces may be mapped to different
+	 * bus.	 The CF memory spaces may be mapped to different
 	 * addresses on different boards.  These values will be 0 if
 	 * CF is not present.  Note that these addresses are physical
 	 * addresses, and it is up to the application to use the
@@ -123,25 +123,25 @@
 
 /**
  * This function is used in non-simple executive environments (such as
- * Linux kernel, u-boot, etc.)  to configure the minimal fields that
+ * Linux kernel, u-boot, etc.)	to configure the minimal fields that
  * are required to use simple executive files directly.
  *
  * Locking (if required) must be handled outside of this
  * function
  *
  * @phy_mem_desc_ptr: Pointer to global physical memory descriptor
- *                   (bootmem descriptor) @board_type: Octeon board
- *                   type enumeration
+ *		     (bootmem descriptor) @board_type: Octeon board
+ *		     type enumeration
  *
  * @board_rev_major:
- *                   Board major revision
+ *		     Board major revision
  * @board_rev_minor:
- *                   Board minor revision
+ *		     Board minor revision
  * @cpu_clock_hz:
- *                   CPU clock freqency in hertz
+ *		     CPU clock freqency in hertz
  *
  * Returns 0: Failure
- *         1: success
+ *	   1: success
  */
 extern int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr,
 					   uint16_t board_type,
diff --git a/arch/mips/include/asm/octeon/cvmx-wqe.h b/arch/mips/include/asm/octeon/cvmx-wqe.h
index df76238..aa0d3d0 100644
--- a/arch/mips/include/asm/octeon/cvmx-wqe.h
+++ b/arch/mips/include/asm/octeon/cvmx-wqe.h
@@ -101,23 +101,23 @@
 		 * - 1 = Malformed L4
 		 * - 2 = L4 Checksum Error: the L4 checksum value is
 		 * - 3 = UDP Length Error: The UDP length field would
-		 *       make the UDP data longer than what remains in
-		 *       the IP packet (as defined by the IP header
-		 *       length field).
+		 *	 make the UDP data longer than what remains in
+		 *	 the IP packet (as defined by the IP header
+		 *	 length field).
 		 * - 4 = Bad L4 Port: either the source or destination
-		 *       TCP/UDP port is 0.
+		 *	 TCP/UDP port is 0.
 		 * - 8 = TCP FIN Only: the packet is TCP and only the
-		 *       FIN flag set.
+		 *	 FIN flag set.
 		 * - 9 = TCP No Flags: the packet is TCP and no flags
-		 *       are set.
+		 *	 are set.
 		 * - 10 = TCP FIN RST: the packet is TCP and both FIN
-		 *        and RST are set.
+		 *	  and RST are set.
 		 * - 11 = TCP SYN URG: the packet is TCP and both SYN
-		 *        and URG are set.
+		 *	  and URG are set.
 		 * - 12 = TCP SYN RST: the packet is TCP and both SYN
-		 *        and RST are set.
+		 *	  and RST are set.
 		 * - 13 = TCP SYN FIN: the packet is TCP and both SYN
-		 *        and FIN are set.
+		 *	  and FIN are set.
 		 */
 		uint64_t L4_error:1;
 		/* set if the packet is a fragment */
@@ -127,16 +127,16 @@
 		 * failure indicated in err_code below, decode:
 		 *
 		 * - 1 = Not IP: the IP version field is neither 4 nor
-		 *       6.
+		 *	 6.
 		 * - 2 = IPv4 Header Checksum Error: the IPv4 header
-		 *       has a checksum violation.
+		 *	 has a checksum violation.
 		 * - 3 = IP Malformed Header: the packet is not long
-		 *       enough to contain the IP header.
+		 *	 enough to contain the IP header.
 		 * - 4 = IP Malformed: the packet is not long enough
 		 *	 to contain the bytes indicated by the IP
 		 *	 header. Pad is allowed.
 		 * - 5 = IP TTL Hop: the IPv4 TTL field or the IPv6
-		 *       Hop Count field are zero.
+		 *	 Hop Count field are zero.
 		 * - 6 = IP Options
 		 */
 		uint64_t IP_exc:1;
@@ -243,46 +243,46 @@
 		 * decode:
 		 *
 		 * - 1 = partial error: a packet was partially
-		 *       received, but internal buffering / bandwidth
-		 *       was not adequate to receive the entire
-		 *       packet.
+		 *	 received, but internal buffering / bandwidth
+		 *	 was not adequate to receive the entire
+		 *	 packet.
 		 * - 2 = jabber error: the RGMII packet was too large
-		 *       and is truncated.
+		 *	 and is truncated.
 		 * - 3 = overrun error: the RGMII packet is longer
-		 *       than allowed and had an FCS error.
+		 *	 than allowed and had an FCS error.
 		 * - 4 = oversize error: the RGMII packet is longer
-		 *       than allowed.
+		 *	 than allowed.
 		 * - 5 = alignment error: the RGMII packet is not an
-		 *       integer number of bytes
-		 *       and had an FCS error (100M and 10M only).
+		 *	 integer number of bytes
+		 *	 and had an FCS error (100M and 10M only).
 		 * - 6 = fragment error: the RGMII packet is shorter
-		 *       than allowed and had an FCS error.
+		 *	 than allowed and had an FCS error.
 		 * - 7 = GMX FCS error: the RGMII packet had an FCS
-		 *       error.
+		 *	 error.
 		 * - 8 = undersize error: the RGMII packet is shorter
-		 *       than allowed.
+		 *	 than allowed.
 		 * - 9 = extend error: the RGMII packet had an extend
-		 *       error.
+		 *	 error.
 		 * - 10 = length mismatch error: the RGMII packet had
-		 *        a length that did not match the length field
-		 *        in the L2 HDR.
+		 *	  a length that did not match the length field
+		 *	  in the L2 HDR.
 		 * - 11 = RGMII RX error/SPI4 DIP4 Error: the RGMII
-		 * 	  packet had one or more data reception errors
-		 * 	  (RXERR) or the SPI4 packet had one or more
-		 * 	  DIP4 errors.
+		 *	  packet had one or more data reception errors
+		 *	  (RXERR) or the SPI4 packet had one or more
+		 *	  DIP4 errors.
 		 * - 12 = RGMII skip error/SPI4 Abort Error: the RGMII
-		 *        packet was not large enough to cover the
-		 *        skipped bytes or the SPI4 packet was
-		 *        terminated with an About EOPS.
+		 *	  packet was not large enough to cover the
+		 *	  skipped bytes or the SPI4 packet was
+		 *	  terminated with an About EOPS.
 		 * - 13 = RGMII nibble error/SPI4 Port NXA Error: the
-		 *        RGMII packet had a studder error (data not
-		 *        repeated - 10/100M only) or the SPI4 packet
-		 *        was sent to an NXA.
+		 *	  RGMII packet had a studder error (data not
+		 *	  repeated - 10/100M only) or the SPI4 packet
+		 *	  was sent to an NXA.
 		 * - 16 = FCS error: a SPI4.2 packet had an FCS error.
 		 * - 17 = Skip error: a packet was not large enough to
-		 *        cover the skipped bytes.
+		 *	  cover the skipped bytes.
 		 * - 18 = L2 header malformed: the packet is not long
-		 *        enough to contain the L2.
+		 *	  enough to contain the L2.
 		 */
 
 		uint64_t rcv_error:1;
@@ -309,7 +309,7 @@
 
     /*****************************************************************
      * WORD 0
-     *  HW WRITE: the following 64 bits are filled by HW when a packet arrives
+     *	HW WRITE: the following 64 bits are filled by HW when a packet arrives
      */
 
     /**
@@ -323,14 +323,14 @@
     /**
      * Next pointer used by hardware for list maintenance.
      * May be written/read by HW before the work queue
-     *           entry is scheduled to a PP
+     *		 entry is scheduled to a PP
      * (Only 36 bits used in Octeon 1)
      */
 	uint64_t next_ptr:40;
 
     /*****************************************************************
      * WORD 1
-     *  HW WRITE: the following 64 bits are filled by HW when a packet arrives
+     *	HW WRITE: the following 64 bits are filled by HW when a packet arrives
      */
 
     /**
@@ -362,8 +362,8 @@
 
     /**
      * WORD 2 HW WRITE: the following 64-bits are filled in by
-     *   hardware when a packet arrives This indicates a variety of
-     *   status and error conditions.
+     *	 hardware when a packet arrives This indicates a variety of
+     *	 status and error conditions.
      */
 	cvmx_pip_wqe_word2 word2;
 
@@ -373,15 +373,15 @@
 	union cvmx_buf_ptr packet_ptr;
 
     /**
-     *   HW WRITE: octeon will fill in a programmable amount from the
-     *             packet, up to (at most, but perhaps less) the amount
-     *             needed to fill the work queue entry to 128 bytes
+     *	 HW WRITE: octeon will fill in a programmable amount from the
+     *		   packet, up to (at most, but perhaps less) the amount
+     *		   needed to fill the work queue entry to 128 bytes
      *
-     *   If the packet is recognized to be IP, the hardware starts
-     *   (except that the IPv4 header is padded for appropriate
-     *   alignment) writing here where the IP header starts.  If the
-     *   packet is not recognized to be IP, the hardware starts
-     *   writing the beginning of the packet here.
+     *	 If the packet is recognized to be IP, the hardware starts
+     *	 (except that the IPv4 header is padded for appropriate
+     *	 alignment) writing here where the IP header starts.  If the
+     *	 packet is not recognized to be IP, the hardware starts
+     *	 writing the beginning of the packet here.
      */
 	uint8_t packet_data[96];
 
diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h
index db58bea..f991e77 100644
--- a/arch/mips/include/asm/octeon/cvmx.h
+++ b/arch/mips/include/asm/octeon/cvmx.h
@@ -76,14 +76,14 @@
 #endif
 
 #if CVMX_ENABLE_DEBUG_PRINTS
-#define cvmx_dprintf        printk
+#define cvmx_dprintf	    printk
 #else
 #define cvmx_dprintf(...)   {}
 #endif
 
-#define CVMX_MAX_CORES          (16)
-#define CVMX_CACHE_LINE_SIZE    (128)	/* In bytes */
-#define CVMX_CACHE_LINE_MASK    (CVMX_CACHE_LINE_SIZE - 1)	/* In bytes */
+#define CVMX_MAX_CORES		(16)
+#define CVMX_CACHE_LINE_SIZE	(128)	/* In bytes */
+#define CVMX_CACHE_LINE_MASK	(CVMX_CACHE_LINE_SIZE - 1)	/* In bytes */
 #define CVMX_CACHE_LINE_ALIGNED __attribute__ ((aligned(CVMX_CACHE_LINE_SIZE)))
 #define CAST64(v) ((long long)(long)(v))
 #define CASTPTR(type, v) ((type *)(long)(v))
@@ -133,8 +133,8 @@
  *
  * Example: cvmx_build_bits(39,24,value)
  * <pre>
- * 6       5       4       3       3       2       1
- * 3       5       7       9       1       3       5       7      0
+ * 6	   5	   4	   3	   3	   2	   1
+ * 3	   5	   7	   9	   1	   3	   5	   7	  0
  * +-------+-------+-------+-------+-------+-------+-------+------+
  * 000000000000000000000000___________value000000000000000000000000
  * </pre>
@@ -183,7 +183,7 @@
  * memory pointer (void *).
  *
  * @physical_address:
- *               Hardware physical address to memory
+ *		 Hardware physical address to memory
  * Returns Pointer to memory
  */
 static inline void *cvmx_phys_to_ptr(uint64_t physical_address)
@@ -207,10 +207,10 @@
 
 /* We have a full 64bit ABI. Writing to a 64bit address can be done with
     a simple volatile pointer */
-#define CVMX_BUILD_WRITE64(TYPE, ST)                                    \
-static inline void cvmx_write64_##TYPE(uint64_t addr, TYPE##_t val)     \
-{                                                                       \
-    *CASTPTR(volatile TYPE##_t, addr) = val;                            \
+#define CVMX_BUILD_WRITE64(TYPE, ST)					\
+static inline void cvmx_write64_##TYPE(uint64_t addr, TYPE##_t val)	\
+{									\
+    *CASTPTR(volatile TYPE##_t, addr) = val;				\
 }
 
 
@@ -221,19 +221,19 @@
 
 /* We have a full 64bit ABI. Writing to a 64bit address can be done with
     a simple volatile pointer */
-#define CVMX_BUILD_READ64(TYPE, LT)                                     \
-static inline TYPE##_t cvmx_read64_##TYPE(uint64_t addr)                \
-{                                                                       \
+#define CVMX_BUILD_READ64(TYPE, LT)					\
+static inline TYPE##_t cvmx_read64_##TYPE(uint64_t addr)		\
+{									\
 	return *CASTPTR(volatile TYPE##_t, addr);			\
 }
 
 
 /* The following defines 8 functions for writing to a 64bit address. Each
     takes two arguments, the address and the value to write.
-    cvmx_write64_int64      cvmx_write64_uint64
-    cvmx_write64_int32      cvmx_write64_uint32
-    cvmx_write64_int16      cvmx_write64_uint16
-    cvmx_write64_int8       cvmx_write64_uint8 */
+    cvmx_write64_int64	    cvmx_write64_uint64
+    cvmx_write64_int32	    cvmx_write64_uint32
+    cvmx_write64_int16	    cvmx_write64_uint16
+    cvmx_write64_int8	    cvmx_write64_uint8 */
 CVMX_BUILD_WRITE64(int64, "sd");
 CVMX_BUILD_WRITE64(int32, "sw");
 CVMX_BUILD_WRITE64(int16, "sh");
@@ -246,10 +246,10 @@
 
 /* The following defines 8 functions for reading from a 64bit address. Each
     takes the address as the only argument
-    cvmx_read64_int64       cvmx_read64_uint64
-    cvmx_read64_int32       cvmx_read64_uint32
-    cvmx_read64_int16       cvmx_read64_uint16
-    cvmx_read64_int8        cvmx_read64_uint8 */
+    cvmx_read64_int64	    cvmx_read64_uint64
+    cvmx_read64_int32	    cvmx_read64_uint32
+    cvmx_read64_int16	    cvmx_read64_uint16
+    cvmx_read64_int8	    cvmx_read64_uint8 */
 CVMX_BUILD_READ64(int64, "ld");
 CVMX_BUILD_READ64(int32, "lw");
 CVMX_BUILD_READ64(int16, "lh");
@@ -389,7 +389,7 @@
 
 /**
  * Reads a chip global cycle counter.  This counts CPU cycles since
- * chip reset.  The counter is 64 bit.
+ * chip reset.	The counter is 64 bit.
  * This register does not exist on CN38XX pass 1 silicion
  *
  * Returns Global chip cycle count since chip reset.
@@ -453,7 +453,7 @@
 
 /**
  * Read a byte of fuse data
- * @byte_addr:   address to read
+ * @byte_addr:	 address to read
  *
  * Returns fuse value: 0 or 1
  */
diff --git a/arch/mips/include/asm/octeon/octeon-feature.h b/arch/mips/include/asm/octeon/octeon-feature.h
index 8008da2..90e05a8 100644
--- a/arch/mips/include/asm/octeon/octeon-feature.h
+++ b/arch/mips/include/asm/octeon/octeon-feature.h
@@ -35,7 +35,7 @@
 #include <asm/octeon/cvmx-rnm-defs.h>
 
 enum octeon_feature {
-        /* CN68XX uses port kinds for packet interface */
+	/* CN68XX uses port kinds for packet interface */
 	OCTEON_FEATURE_PKND,
 	/* CN68XX has different fields in word0 - word2 */
 	OCTEON_FEATURE_CN68XX_WQE,
@@ -51,7 +51,7 @@
 	OCTEON_FEATURE_DORM_CRYPTO,
 	/* Does this Octeon support PCI express? */
 	OCTEON_FEATURE_PCIE,
-        /* Does this Octeon support SRIOs */
+	/* Does this Octeon support SRIOs */
 	OCTEON_FEATURE_SRIO,
 	/*  Does this Octeon support Interlaken */
 	OCTEON_FEATURE_ILK,
@@ -75,7 +75,7 @@
 	/* Octeon MDIO block supports clause 45 transactions for 10
 	 * Gig support */
 	OCTEON_FEATURE_MDIO_CLAUSE_45,
-        /*
+	/*
 	 *  CN52XX and CN56XX used a block named NPEI for PCIe
 	 *  access. Newer chips replaced this with SLI+DPI.
 	 */
@@ -94,10 +94,10 @@
  * be kept out of fast path code.
  *
  * @feature: Feature to check for. This should always be a constant so the
- *                compiler can remove the switch statement through optimization.
+ *		  compiler can remove the switch statement through optimization.
  *
  * Returns Non zero if the feature exists. Zero if the feature does not
- *         exist.
+ *	   exist.
  */
 static inline int octeon_has_feature(enum octeon_feature feature)
 {
diff --git a/arch/mips/include/asm/octeon/octeon-model.h b/arch/mips/include/asm/octeon/octeon-model.h
index 349bb2b..e2c122c 100644
--- a/arch/mips/include/asm/octeon/octeon-model.h
+++ b/arch/mips/include/asm/octeon/octeon-model.h
@@ -29,7 +29,7 @@
 
 /*
  * The defines below should be used with the OCTEON_IS_MODEL() macro
- * to determine what model of chip the software is running on.  Models
+ * to determine what model of chip the software is running on.	Models
  * ending in 'XX' match multiple models (families), while specific
  * models match only that model.  If a pass (revision) is specified,
  * then only that revision will be matched.  Care should be taken when
@@ -40,183 +40,183 @@
  * subject to change at anytime without notice.
  *
  * NOTE: only the OCTEON_IS_MODEL() macro/function and the OCTEON_CN*
- * macros should be used outside of this file.  All other macros are
+ * macros should be used outside of this file.	All other macros are
  * for internal use only, and may change without notice.
  */
 
-#define OCTEON_FAMILY_MASK      0x00ffff00
+#define OCTEON_FAMILY_MASK	0x00ffff00
 
 /* Flag bits in top byte */
 /* Ignores revision in model checks */
-#define OM_IGNORE_REVISION        0x01000000
+#define OM_IGNORE_REVISION	  0x01000000
 /* Check submodels */
-#define OM_CHECK_SUBMODEL         0x02000000
+#define OM_CHECK_SUBMODEL	  0x02000000
 /* Match all models previous than the one specified */
 #define OM_MATCH_PREVIOUS_MODELS  0x04000000
 /* Ignores the minor revison on newer parts */
 #define OM_IGNORE_MINOR_REVISION  0x08000000
-#define OM_FLAG_MASK              0xff000000
+#define OM_FLAG_MASK		  0xff000000
 
 /* Match all cn5XXX Octeon models. */
-#define OM_MATCH_5XXX_FAMILY_MODELS     0x20000000
+#define OM_MATCH_5XXX_FAMILY_MODELS	0x20000000
 /* Match all cn6XXX Octeon models. */
-#define OM_MATCH_6XXX_FAMILY_MODELS     0x40000000
+#define OM_MATCH_6XXX_FAMILY_MODELS	0x40000000
 /* Match all cnf7XXX Octeon models. */
-#define OM_MATCH_F7XXX_FAMILY_MODELS    0x80000000
+#define OM_MATCH_F7XXX_FAMILY_MODELS	0x80000000
 
 /*
  * CNF7XXX models with new revision encoding
  */
-#define OCTEON_CNF71XX_PASS1_0  0x000d9400
+#define OCTEON_CNF71XX_PASS1_0	0x000d9400
 
-#define OCTEON_CNF71XX          (OCTEON_CNF71XX_PASS1_0 | OM_IGNORE_REVISION)
-#define OCTEON_CNF71XX_PASS1_X  (OCTEON_CNF71XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CNF71XX		(OCTEON_CNF71XX_PASS1_0 | OM_IGNORE_REVISION)
+#define OCTEON_CNF71XX_PASS1_X	(OCTEON_CNF71XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
 
 /*
  * CN6XXX models with new revision encoding
  */
-#define OCTEON_CN68XX_PASS1_0   0x000d9100
-#define OCTEON_CN68XX_PASS1_1   0x000d9101
-#define OCTEON_CN68XX_PASS1_2   0x000d9102
-#define OCTEON_CN68XX_PASS2_0   0x000d9108
+#define OCTEON_CN68XX_PASS1_0	0x000d9100
+#define OCTEON_CN68XX_PASS1_1	0x000d9101
+#define OCTEON_CN68XX_PASS1_2	0x000d9102
+#define OCTEON_CN68XX_PASS2_0	0x000d9108
 
-#define OCTEON_CN68XX           (OCTEON_CN68XX_PASS2_0 | OM_IGNORE_REVISION)
-#define OCTEON_CN68XX_PASS1_X   (OCTEON_CN68XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
-#define OCTEON_CN68XX_PASS2_X   (OCTEON_CN68XX_PASS2_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN68XX		(OCTEON_CN68XX_PASS2_0 | OM_IGNORE_REVISION)
+#define OCTEON_CN68XX_PASS1_X	(OCTEON_CN68XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN68XX_PASS2_X	(OCTEON_CN68XX_PASS2_0 | OM_IGNORE_MINOR_REVISION)
 
 #define OCTEON_CN68XX_PASS1	OCTEON_CN68XX_PASS1_X
 #define OCTEON_CN68XX_PASS2	OCTEON_CN68XX_PASS2_X
 
-#define OCTEON_CN66XX_PASS1_0   0x000d9200
-#define OCTEON_CN66XX_PASS1_2   0x000d9202
+#define OCTEON_CN66XX_PASS1_0	0x000d9200
+#define OCTEON_CN66XX_PASS1_2	0x000d9202
 
-#define OCTEON_CN66XX           (OCTEON_CN66XX_PASS1_0 | OM_IGNORE_REVISION)
-#define OCTEON_CN66XX_PASS1_X   (OCTEON_CN66XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN66XX		(OCTEON_CN66XX_PASS1_0 | OM_IGNORE_REVISION)
+#define OCTEON_CN66XX_PASS1_X	(OCTEON_CN66XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
 
-#define OCTEON_CN63XX_PASS1_0   0x000d9000
-#define OCTEON_CN63XX_PASS1_1   0x000d9001
-#define OCTEON_CN63XX_PASS1_2   0x000d9002
-#define OCTEON_CN63XX_PASS2_0   0x000d9008
-#define OCTEON_CN63XX_PASS2_1   0x000d9009
-#define OCTEON_CN63XX_PASS2_2   0x000d900a
+#define OCTEON_CN63XX_PASS1_0	0x000d9000
+#define OCTEON_CN63XX_PASS1_1	0x000d9001
+#define OCTEON_CN63XX_PASS1_2	0x000d9002
+#define OCTEON_CN63XX_PASS2_0	0x000d9008
+#define OCTEON_CN63XX_PASS2_1	0x000d9009
+#define OCTEON_CN63XX_PASS2_2	0x000d900a
 
-#define OCTEON_CN63XX           (OCTEON_CN63XX_PASS2_0 | OM_IGNORE_REVISION)
-#define OCTEON_CN63XX_PASS1_X   (OCTEON_CN63XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
-#define OCTEON_CN63XX_PASS2_X   (OCTEON_CN63XX_PASS2_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN63XX		(OCTEON_CN63XX_PASS2_0 | OM_IGNORE_REVISION)
+#define OCTEON_CN63XX_PASS1_X	(OCTEON_CN63XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN63XX_PASS2_X	(OCTEON_CN63XX_PASS2_0 | OM_IGNORE_MINOR_REVISION)
 
-#define OCTEON_CN61XX_PASS1_0   0x000d9300
+#define OCTEON_CN61XX_PASS1_0	0x000d9300
 
-#define OCTEON_CN61XX           (OCTEON_CN61XX_PASS1_0 | OM_IGNORE_REVISION)
-#define OCTEON_CN61XX_PASS1_X   (OCTEON_CN61XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN61XX		(OCTEON_CN61XX_PASS1_0 | OM_IGNORE_REVISION)
+#define OCTEON_CN61XX_PASS1_X	(OCTEON_CN61XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
 
 /*
  * CN5XXX models with new revision encoding
  */
-#define OCTEON_CN58XX_PASS1_0   0x000d0300
-#define OCTEON_CN58XX_PASS1_1   0x000d0301
-#define OCTEON_CN58XX_PASS1_2   0x000d0303
-#define OCTEON_CN58XX_PASS2_0   0x000d0308
-#define OCTEON_CN58XX_PASS2_1   0x000d0309
-#define OCTEON_CN58XX_PASS2_2   0x000d030a
-#define OCTEON_CN58XX_PASS2_3   0x000d030b
+#define OCTEON_CN58XX_PASS1_0	0x000d0300
+#define OCTEON_CN58XX_PASS1_1	0x000d0301
+#define OCTEON_CN58XX_PASS1_2	0x000d0303
+#define OCTEON_CN58XX_PASS2_0	0x000d0308
+#define OCTEON_CN58XX_PASS2_1	0x000d0309
+#define OCTEON_CN58XX_PASS2_2	0x000d030a
+#define OCTEON_CN58XX_PASS2_3	0x000d030b
 
-#define OCTEON_CN58XX           (OCTEON_CN58XX_PASS1_0 | OM_IGNORE_REVISION)
-#define OCTEON_CN58XX_PASS1_X   (OCTEON_CN58XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
-#define OCTEON_CN58XX_PASS2_X   (OCTEON_CN58XX_PASS2_0 | OM_IGNORE_MINOR_REVISION)
-#define OCTEON_CN58XX_PASS1     OCTEON_CN58XX_PASS1_X
-#define OCTEON_CN58XX_PASS2     OCTEON_CN58XX_PASS2_X
+#define OCTEON_CN58XX		(OCTEON_CN58XX_PASS1_0 | OM_IGNORE_REVISION)
+#define OCTEON_CN58XX_PASS1_X	(OCTEON_CN58XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN58XX_PASS2_X	(OCTEON_CN58XX_PASS2_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN58XX_PASS1	OCTEON_CN58XX_PASS1_X
+#define OCTEON_CN58XX_PASS2	OCTEON_CN58XX_PASS2_X
 
-#define OCTEON_CN56XX_PASS1_0   0x000d0400
-#define OCTEON_CN56XX_PASS1_1   0x000d0401
-#define OCTEON_CN56XX_PASS2_0   0x000d0408
-#define OCTEON_CN56XX_PASS2_1   0x000d0409
+#define OCTEON_CN56XX_PASS1_0	0x000d0400
+#define OCTEON_CN56XX_PASS1_1	0x000d0401
+#define OCTEON_CN56XX_PASS2_0	0x000d0408
+#define OCTEON_CN56XX_PASS2_1	0x000d0409
 
-#define OCTEON_CN56XX           (OCTEON_CN56XX_PASS2_0 | OM_IGNORE_REVISION)
-#define OCTEON_CN56XX_PASS1_X   (OCTEON_CN56XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
-#define OCTEON_CN56XX_PASS2_X   (OCTEON_CN56XX_PASS2_0 | OM_IGNORE_MINOR_REVISION)
-#define OCTEON_CN56XX_PASS1     OCTEON_CN56XX_PASS1_X
-#define OCTEON_CN56XX_PASS2     OCTEON_CN56XX_PASS2_X
+#define OCTEON_CN56XX		(OCTEON_CN56XX_PASS2_0 | OM_IGNORE_REVISION)
+#define OCTEON_CN56XX_PASS1_X	(OCTEON_CN56XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN56XX_PASS2_X	(OCTEON_CN56XX_PASS2_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN56XX_PASS1	OCTEON_CN56XX_PASS1_X
+#define OCTEON_CN56XX_PASS2	OCTEON_CN56XX_PASS2_X
 
-#define OCTEON_CN57XX           OCTEON_CN56XX
-#define OCTEON_CN57XX_PASS1     OCTEON_CN56XX_PASS1
-#define OCTEON_CN57XX_PASS2     OCTEON_CN56XX_PASS2
+#define OCTEON_CN57XX		OCTEON_CN56XX
+#define OCTEON_CN57XX_PASS1	OCTEON_CN56XX_PASS1
+#define OCTEON_CN57XX_PASS2	OCTEON_CN56XX_PASS2
 
-#define OCTEON_CN55XX           OCTEON_CN56XX
-#define OCTEON_CN55XX_PASS1     OCTEON_CN56XX_PASS1
-#define OCTEON_CN55XX_PASS2     OCTEON_CN56XX_PASS2
+#define OCTEON_CN55XX		OCTEON_CN56XX
+#define OCTEON_CN55XX_PASS1	OCTEON_CN56XX_PASS1
+#define OCTEON_CN55XX_PASS2	OCTEON_CN56XX_PASS2
 
-#define OCTEON_CN54XX           OCTEON_CN56XX
-#define OCTEON_CN54XX_PASS1     OCTEON_CN56XX_PASS1
-#define OCTEON_CN54XX_PASS2     OCTEON_CN56XX_PASS2
+#define OCTEON_CN54XX		OCTEON_CN56XX
+#define OCTEON_CN54XX_PASS1	OCTEON_CN56XX_PASS1
+#define OCTEON_CN54XX_PASS2	OCTEON_CN56XX_PASS2
 
-#define OCTEON_CN50XX_PASS1_0   0x000d0600
+#define OCTEON_CN50XX_PASS1_0	0x000d0600
 
-#define OCTEON_CN50XX           (OCTEON_CN50XX_PASS1_0 | OM_IGNORE_REVISION)
-#define OCTEON_CN50XX_PASS1_X   (OCTEON_CN50XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
-#define OCTEON_CN50XX_PASS1     OCTEON_CN50XX_PASS1_X
+#define OCTEON_CN50XX		(OCTEON_CN50XX_PASS1_0 | OM_IGNORE_REVISION)
+#define OCTEON_CN50XX_PASS1_X	(OCTEON_CN50XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN50XX_PASS1	OCTEON_CN50XX_PASS1_X
 
 /*
  * NOTE: Octeon CN5000F model is not identifiable using the
  * OCTEON_IS_MODEL() functions, but are treated as CN50XX.
  */
 
-#define OCTEON_CN52XX_PASS1_0   0x000d0700
-#define OCTEON_CN52XX_PASS2_0   0x000d0708
+#define OCTEON_CN52XX_PASS1_0	0x000d0700
+#define OCTEON_CN52XX_PASS2_0	0x000d0708
 
-#define OCTEON_CN52XX           (OCTEON_CN52XX_PASS2_0 | OM_IGNORE_REVISION)
-#define OCTEON_CN52XX_PASS1_X   (OCTEON_CN52XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
-#define OCTEON_CN52XX_PASS2_X   (OCTEON_CN52XX_PASS2_0 | OM_IGNORE_MINOR_REVISION)
-#define OCTEON_CN52XX_PASS1     OCTEON_CN52XX_PASS1_X
-#define OCTEON_CN52XX_PASS2     OCTEON_CN52XX_PASS2_X
+#define OCTEON_CN52XX		(OCTEON_CN52XX_PASS2_0 | OM_IGNORE_REVISION)
+#define OCTEON_CN52XX_PASS1_X	(OCTEON_CN52XX_PASS1_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN52XX_PASS2_X	(OCTEON_CN52XX_PASS2_0 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN52XX_PASS1	OCTEON_CN52XX_PASS1_X
+#define OCTEON_CN52XX_PASS2	OCTEON_CN52XX_PASS2_X
 
 /*
  * CN3XXX models with old revision enconding
  */
-#define OCTEON_CN38XX_PASS1     0x000d0000
-#define OCTEON_CN38XX_PASS2     0x000d0001
-#define OCTEON_CN38XX_PASS3     0x000d0003
-#define OCTEON_CN38XX           (OCTEON_CN38XX_PASS3 | OM_IGNORE_REVISION)
+#define OCTEON_CN38XX_PASS1	0x000d0000
+#define OCTEON_CN38XX_PASS2	0x000d0001
+#define OCTEON_CN38XX_PASS3	0x000d0003
+#define OCTEON_CN38XX		(OCTEON_CN38XX_PASS3 | OM_IGNORE_REVISION)
 
-#define OCTEON_CN36XX           OCTEON_CN38XX
-#define OCTEON_CN36XX_PASS2     OCTEON_CN38XX_PASS2
-#define OCTEON_CN36XX_PASS3     OCTEON_CN38XX_PASS3
+#define OCTEON_CN36XX		OCTEON_CN38XX
+#define OCTEON_CN36XX_PASS2	OCTEON_CN38XX_PASS2
+#define OCTEON_CN36XX_PASS3	OCTEON_CN38XX_PASS3
 
 /* The OCTEON_CN31XX matches CN31XX models and the CN3020 */
-#define OCTEON_CN31XX_PASS1     0x000d0100
-#define OCTEON_CN31XX_PASS1_1   0x000d0102
-#define OCTEON_CN31XX           (OCTEON_CN31XX_PASS1 | OM_IGNORE_REVISION)
+#define OCTEON_CN31XX_PASS1	0x000d0100
+#define OCTEON_CN31XX_PASS1_1	0x000d0102
+#define OCTEON_CN31XX		(OCTEON_CN31XX_PASS1 | OM_IGNORE_REVISION)
 
 /*
  * This model is only used for internal checks, it is not a valid
  * model for the OCTEON_MODEL environment variable.  This matches the
  * CN3010 and CN3005 but NOT the CN3020.
  */
-#define OCTEON_CN30XX_PASS1     0x000d0200
-#define OCTEON_CN30XX_PASS1_1   0x000d0202
-#define OCTEON_CN30XX           (OCTEON_CN30XX_PASS1 | OM_IGNORE_REVISION)
+#define OCTEON_CN30XX_PASS1	0x000d0200
+#define OCTEON_CN30XX_PASS1_1	0x000d0202
+#define OCTEON_CN30XX		(OCTEON_CN30XX_PASS1 | OM_IGNORE_REVISION)
 
-#define OCTEON_CN3005_PASS1     (0x000d0210 | OM_CHECK_SUBMODEL)
-#define OCTEON_CN3005_PASS1_0   (0x000d0210 | OM_CHECK_SUBMODEL)
-#define OCTEON_CN3005_PASS1_1   (0x000d0212 | OM_CHECK_SUBMODEL)
-#define OCTEON_CN3005           (OCTEON_CN3005_PASS1 | OM_IGNORE_REVISION | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3005_PASS1	(0x000d0210 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3005_PASS1_0	(0x000d0210 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3005_PASS1_1	(0x000d0212 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3005		(OCTEON_CN3005_PASS1 | OM_IGNORE_REVISION | OM_CHECK_SUBMODEL)
 
-#define OCTEON_CN3010_PASS1     (0x000d0200 | OM_CHECK_SUBMODEL)
-#define OCTEON_CN3010_PASS1_0   (0x000d0200 | OM_CHECK_SUBMODEL)
-#define OCTEON_CN3010_PASS1_1   (0x000d0202 | OM_CHECK_SUBMODEL)
-#define OCTEON_CN3010           (OCTEON_CN3010_PASS1 | OM_IGNORE_REVISION | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3010_PASS1	(0x000d0200 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3010_PASS1_0	(0x000d0200 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3010_PASS1_1	(0x000d0202 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3010		(OCTEON_CN3010_PASS1 | OM_IGNORE_REVISION | OM_CHECK_SUBMODEL)
 
-#define OCTEON_CN3020_PASS1     (0x000d0110 | OM_CHECK_SUBMODEL)
-#define OCTEON_CN3020_PASS1_0   (0x000d0110 | OM_CHECK_SUBMODEL)
-#define OCTEON_CN3020_PASS1_1   (0x000d0112 | OM_CHECK_SUBMODEL)
-#define OCTEON_CN3020           (OCTEON_CN3020_PASS1 | OM_IGNORE_REVISION | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3020_PASS1	(0x000d0110 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3020_PASS1_0	(0x000d0110 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3020_PASS1_1	(0x000d0112 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3020		(OCTEON_CN3020_PASS1 | OM_IGNORE_REVISION | OM_CHECK_SUBMODEL)
 
 /*
  * This matches the complete family of CN3xxx CPUs, and not subsequent
  * models
  */
-#define OCTEON_CN3XXX           (OCTEON_CN58XX_PASS1_0 | OM_MATCH_PREVIOUS_MODELS | OM_IGNORE_REVISION)
-#define OCTEON_CN5XXX           (OCTEON_CN58XX_PASS1_0 | OM_MATCH_5XXX_FAMILY_MODELS)
-#define OCTEON_CN6XXX           (OCTEON_CN63XX_PASS1_0 | OM_MATCH_6XXX_FAMILY_MODELS)
+#define OCTEON_CN3XXX		(OCTEON_CN58XX_PASS1_0 | OM_MATCH_PREVIOUS_MODELS | OM_IGNORE_REVISION)
+#define OCTEON_CN5XXX		(OCTEON_CN58XX_PASS1_0 | OM_MATCH_5XXX_FAMILY_MODELS)
+#define OCTEON_CN6XXX		(OCTEON_CN63XX_PASS1_0 | OM_MATCH_6XXX_FAMILY_MODELS)
 
 /* These are used to cover entire families of OCTEON processors */
 #define OCTEON_FAM_1		(OCTEON_CN3XXX)
@@ -243,18 +243,18 @@
  */
 
 /* Masks used for the various types of model/family/revision matching */
-#define OCTEON_38XX_FAMILY_MASK      0x00ffff00
+#define OCTEON_38XX_FAMILY_MASK	     0x00ffff00
 #define OCTEON_38XX_FAMILY_REV_MASK  0x00ffff0f
-#define OCTEON_38XX_MODEL_MASK       0x00ffff10
+#define OCTEON_38XX_MODEL_MASK	     0x00ffff10
 #define OCTEON_38XX_MODEL_REV_MASK   (OCTEON_38XX_FAMILY_REV_MASK | OCTEON_38XX_MODEL_MASK)
 
 /* CN5XXX and later use different layout of bits in the revision ID field */
-#define OCTEON_58XX_FAMILY_MASK      OCTEON_38XX_FAMILY_MASK
+#define OCTEON_58XX_FAMILY_MASK	     OCTEON_38XX_FAMILY_MASK
 #define OCTEON_58XX_FAMILY_REV_MASK  0x00ffff3f
-#define OCTEON_58XX_MODEL_MASK       0x00ffffc0
+#define OCTEON_58XX_MODEL_MASK	     0x00ffffc0
 #define OCTEON_58XX_MODEL_REV_MASK   (OCTEON_58XX_FAMILY_REV_MASK | OCTEON_58XX_MODEL_MASK)
 #define OCTEON_58XX_MODEL_MINOR_REV_MASK (OCTEON_58XX_MODEL_REV_MASK & 0x00fffff8)
-#define OCTEON_5XXX_MODEL_MASK       0x00ff0fc0
+#define OCTEON_5XXX_MODEL_MASK	     0x00ff0fc0
 
 /* forward declarations */
 static inline uint32_t cvmx_get_proc_id(void) __attribute__ ((pure));
@@ -264,7 +264,7 @@
 
 /* NOTE: This for internal use only! */
 #define __OCTEON_IS_MODEL_COMPILE__(arg_model, chip_model)		\
-((((arg_model & OCTEON_38XX_FAMILY_MASK) < OCTEON_CN58XX_PASS1_0)  && (	\
+((((arg_model & OCTEON_38XX_FAMILY_MASK) < OCTEON_CN58XX_PASS1_0)  && ( \
 		((((arg_model) & (OM_FLAG_MASK)) == (OM_IGNORE_REVISION | OM_CHECK_SUBMODEL)) \
 			&& __OCTEON_MATCH_MASK__((chip_model), (arg_model), OCTEON_38XX_MODEL_MASK)) || \
 		((((arg_model) & (OM_FLAG_MASK)) == 0)			\
@@ -276,7 +276,7 @@
 		((((arg_model) & (OM_MATCH_PREVIOUS_MODELS)) == OM_MATCH_PREVIOUS_MODELS) \
 			&& (((chip_model) & OCTEON_38XX_MODEL_MASK) < ((arg_model) & OCTEON_38XX_MODEL_MASK))) \
 		)) ||							\
-	(((arg_model & OCTEON_38XX_FAMILY_MASK) >= OCTEON_CN58XX_PASS1_0)  && (	\
+	(((arg_model & OCTEON_38XX_FAMILY_MASK) >= OCTEON_CN58XX_PASS1_0)  && ( \
 		((((arg_model) & (OM_FLAG_MASK)) == (OM_IGNORE_REVISION | OM_CHECK_SUBMODEL)) \
 			&& __OCTEON_MATCH_MASK__((chip_model), (arg_model), OCTEON_58XX_MODEL_MASK)) || \
 		((((arg_model) & (OM_FLAG_MASK)) == 0)			\
@@ -320,7 +320,7 @@
  * Use of the macro in preprocessor directives ( #if OCTEON_IS_MODEL(...) )
  * is NOT SUPPORTED, and should be replaced with CVMX_COMPILED_FOR()
  * I.e.:
- *  #if OCTEON_IS_MODEL(OCTEON_CN56XX)  ->  #if CVMX_COMPILED_FOR(OCTEON_CN56XX)
+ *  #if OCTEON_IS_MODEL(OCTEON_CN56XX)	->  #if CVMX_COMPILED_FOR(OCTEON_CN56XX)
  */
 #define OCTEON_IS_MODEL(x) __octeon_is_model_runtime__(x)
 #define OCTEON_IS_COMMON_BINARY() 1
diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h
index 254e995..a2eed23 100644
--- a/arch/mips/include/asm/octeon/octeon.h
+++ b/arch/mips/include/asm/octeon/octeon.h
@@ -75,15 +75,15 @@
 	uint32_t argc;
 	uint32_t argv[OCTEON_ARGV_MAX_ARGS];
 
-#define  BOOT_FLAG_INIT_CORE		(1 << 0)
-#define  OCTEON_BL_FLAG_DEBUG		(1 << 1)
-#define  OCTEON_BL_FLAG_NO_MAGIC	(1 << 2)
+#define	 BOOT_FLAG_INIT_CORE		(1 << 0)
+#define	 OCTEON_BL_FLAG_DEBUG		(1 << 1)
+#define	 OCTEON_BL_FLAG_NO_MAGIC	(1 << 2)
 	/* If set, use uart1 for console */
-#define  OCTEON_BL_FLAG_CONSOLE_UART1	(1 << 3)
+#define	 OCTEON_BL_FLAG_CONSOLE_UART1	(1 << 3)
 	/* If set, use PCI console */
-#define  OCTEON_BL_FLAG_CONSOLE_PCI	(1 << 4)
+#define	 OCTEON_BL_FLAG_CONSOLE_PCI	(1 << 4)
 	/* Call exit on break on serial port */
-#define  OCTEON_BL_FLAG_BREAK		(1 << 5)
+#define	 OCTEON_BL_FLAG_BREAK		(1 << 5)
 
 	uint32_t flags;
 	uint32_t core_mask;
diff --git a/arch/mips/include/asm/octeon/pci-octeon.h b/arch/mips/include/asm/octeon/pci-octeon.h
index c66734b..64ba56a 100644
--- a/arch/mips/include/asm/octeon/pci-octeon.h
+++ b/arch/mips/include/asm/octeon/pci-octeon.h
@@ -22,7 +22,7 @@
 #define CVMX_PCIE_BAR1_PHYS_SIZE (1ull << 28)
 
 /*
- * The RC base of BAR1.  gen1 has a 39-bit BAR2, gen2 has 41-bit BAR2,
+ * The RC base of BAR1.	 gen1 has a 39-bit BAR2, gen2 has 41-bit BAR2,
  * place BAR1 so it is the same for both.
  */
 #define CVMX_PCIE_BAR1_RC_BASE (1ull << 41)
diff --git a/arch/mips/include/asm/paccess.h b/arch/mips/include/asm/paccess.h
index 9ce5a1e..2474fc5 100644
--- a/arch/mips/include/asm/paccess.h
+++ b/arch/mips/include/asm/paccess.h
@@ -43,7 +43,7 @@
 	case 1: __get_dbe_asm("lb"); break;				\
 	case 2: __get_dbe_asm("lh"); break;				\
 	case 4: __get_dbe_asm("lw"); break;				\
-	case 8:  __get_dbe_asm("ld"); break;				\
+	case 8:	 __get_dbe_asm("ld"); break;				\
 	default: __get_dbe_unknown(); break;				\
 	}								\
 	x = (__typeof__(*(ptr))) __gu_val;				\
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index dbaec94..99fc547 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -31,7 +31,7 @@
 #define PAGE_SHIFT	16
 #endif
 #define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK       (~(PAGE_SIZE - 1))
+#define PAGE_MASK	(~(PAGE_SIZE - 1))
 
 #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
 #define HPAGE_SHIFT	(PAGE_SHIFT + PAGE_SHIFT - 3)
@@ -95,11 +95,11 @@
 #ifdef CONFIG_64BIT_PHYS_ADDR
   #ifdef CONFIG_CPU_MIPS32
     typedef struct { unsigned long pte_low, pte_high; } pte_t;
-    #define pte_val(x)    ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
-    #define __pte(x)      ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
+    #define pte_val(x)	  ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
+    #define __pte(x)	  ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
   #else
      typedef struct { unsigned long long pte; } pte_t;
-     #define pte_val(x)	((x).pte)
+     #define pte_val(x) ((x).pte)
      #define __pte(x)	((pte_t) { (x) } )
   #endif
 #else
@@ -191,8 +191,8 @@
 	unsigned long __pfn = (pfn);					\
 	int __n = pfn_to_nid(__pfn);					\
 	((__n >= 0) ? (__pfn < NODE_DATA(__n)->node_start_pfn +		\
-	                       NODE_DATA(__n)->node_spanned_pages)	\
-	            : 0);						\
+			       NODE_DATA(__n)->node_spanned_pages)	\
+		    : 0);						\
 })
 
 #endif
@@ -206,7 +206,7 @@
 #define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + UNCAC_BASE + 	\
+#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + UNCAC_BASE +	\
 								PHYS_OFFSET)
 #define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET -	\
 								PHYS_OFFSET)
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index d69ea74..b8e24fd 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -12,7 +12,7 @@
 
 /*
  * This file essentially defines the interface between board
- * specific PCI code and MIPS common PCI code.  Should potentially put
+ * specific PCI code and MIPS common PCI code.	Should potentially put
  * into include/asm/pci.h file.
  */
 
@@ -20,7 +20,7 @@
 #include <linux/of.h>
 
 /*
- * Each pci channel is a top-level PCI bus seem by CPU.  A machine  with
+ * Each pci channel is a top-level PCI bus seem by CPU.	 A machine  with
  * multiple PCI channels may have multiple PCI host controllers or a
  * single controller supporting multiple channels.
  */
@@ -99,7 +99,7 @@
 struct pci_dev;
 
 /*
- * The PCI address space does equal the physical memory address space.  The
+ * The PCI address space does equal the physical memory address space.	The
  * networking and block device layers use this boolean for bounce buffer
  * decisions.  This is set if any hose does not have an IOMMU.
  */
@@ -144,8 +144,13 @@
 
 extern char * (*pcibios_plat_setup)(char *str);
 
+#ifdef CONFIG_OF
 /* this function parses memory ranges from a device node */
 extern void pci_load_of_ranges(struct pci_controller *hose,
 			       struct device_node *node);
+#else
+static inline void pci_load_of_ranges(struct pci_controller *hose,
+				      struct device_node *node) {}
+#endif
 
 #endif /* _ASM_PCI_H */
diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h
index be44fb0..af2c8a3 100644
--- a/arch/mips/include/asm/pci/bridge.h
+++ b/arch/mips/include/asm/pci/bridge.h
@@ -85,7 +85,7 @@
 #define b_wid_llp			b_widget.w_llp_cfg
 #define b_wid_tflush			b_widget.w_tflush
 
-	/* bridge-specific widget configuration	0x000058-0x00007F */
+	/* bridge-specific widget configuration 0x000058-0x00007F */
 	bridgereg_t	    _pad_000058;
 	bridgereg_t	    b_wid_aux_err;		/* 0x00005C */
 	bridgereg_t	    _pad_000060;
@@ -167,8 +167,8 @@
 		bridgereg_t	__pad;			/* 0x0002{80,,,88} */
 		bridgereg_t	reg;			/* 0x0002{84,,,8C} */
 	} b_rrb_map[2];					/* 0x000280 */
-#define	b_even_resp	b_rrb_map[0].reg		/* 0x000284 */
-#define	b_odd_resp	b_rrb_map[1].reg		/* 0x00028C */
+#define b_even_resp	b_rrb_map[0].reg		/* 0x000284 */
+#define b_odd_resp	b_rrb_map[1].reg		/* 0x00028C */
 
 	bridgereg_t	_pad_000290;
 	bridgereg_t	b_resp_status;			/* 0x000294 */
@@ -233,7 +233,7 @@
 	u8	_pad_030007[0x04fff8];			/* 0x030008-0x07FFFF */
 
 	/* External Address Translation Entry RAM 0x080000-0x0FFFFF */
-	bridge_ate_t    b_ext_ate_ram[0x10000];
+	bridge_ate_t	b_ext_ate_ram[0x10000];
 
 	/* Reserved 0x100000-0x1FFFFF */
 	char	_pad_100000[0x200000-0x100000];
@@ -400,7 +400,7 @@
 #define BRIDGE_REV_A			0x1
 #define BRIDGE_REV_B			0x2
 #define BRIDGE_REV_C			0x3
-#define	BRIDGE_REV_D			0x4
+#define BRIDGE_REV_D			0x4
 
 /* Bridge widget status register bits definition */
 
@@ -691,21 +691,21 @@
 #define BRIDGE_CREDIT	3
 
 /* RRB assignment register */
-#define	BRIDGE_RRB_EN	0x8	/* after shifting down */
-#define	BRIDGE_RRB_DEV	0x7	/* after shifting down */
-#define	BRIDGE_RRB_VDEV	0x4	/* after shifting down */
-#define	BRIDGE_RRB_PDEV	0x3	/* after shifting down */
+#define BRIDGE_RRB_EN	0x8	/* after shifting down */
+#define BRIDGE_RRB_DEV	0x7	/* after shifting down */
+#define BRIDGE_RRB_VDEV 0x4	/* after shifting down */
+#define BRIDGE_RRB_PDEV 0x3	/* after shifting down */
 
 /* RRB status register */
-#define	BRIDGE_RRB_VALID(r)	(0x00010000<<(r))
-#define	BRIDGE_RRB_INUSE(r)	(0x00000001<<(r))
+#define BRIDGE_RRB_VALID(r)	(0x00010000<<(r))
+#define BRIDGE_RRB_INUSE(r)	(0x00000001<<(r))
 
 /* RRB clear register */
-#define	BRIDGE_RRB_CLEAR(r)	(0x00000001<<(r))
+#define BRIDGE_RRB_CLEAR(r)	(0x00000001<<(r))
 
 /* xbox system controller declarations */
-#define XBOX_BRIDGE_WID         8
-#define FLASH_PROM1_BASE        0xE00000 /* To read the xbox sysctlr status */
+#define XBOX_BRIDGE_WID		8
+#define FLASH_PROM1_BASE	0xE00000 /* To read the xbox sysctlr status */
 #define XBOX_RPS_EXISTS		1 << 6	 /* RPS bit in status register */
 #define XBOX_RPS_FAIL		1 << 4	 /* RPS status bit in register */
 
@@ -838,7 +838,7 @@
 	bridge_t		*base;
 	nasid_t			nasid;
 	unsigned int		widget_id;
-	unsigned int 		irq_cpu;
+	unsigned int		irq_cpu;
 	u64			baddr;
 	unsigned int		pci_int[8];
 };
diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h
index 5d56bb2..b4204c1 100644
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -47,7 +47,7 @@
 #define USER_PTRS_PER_PGD	(0x80000000UL/PGDIR_SIZE)
 #define FIRST_USER_ADDRESS	0
 
-#define VMALLOC_START     MAP_BASE
+#define VMALLOC_START	  MAP_BASE
 
 #define PKMAP_BASE		(0xfe000000UL)
 
@@ -136,7 +136,7 @@
 #define pte_offset_kernel(dir, address)					\
 	((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
 
-#define pte_offset_map(dir, address)                                    \
+#define pte_offset_map(dir, address)					\
 	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
 #define pte_unmap(pte) ((void)(pte))
 
@@ -155,7 +155,7 @@
 
 #define pte_to_pgoff(_pte)	((((_pte).pte >> 1 ) & 0x07) | \
 				 (((_pte).pte >> 2 ) & 0x38) | \
-				 (((_pte).pte >> 10) <<  6 ))
+				 (((_pte).pte >> 10) <<	 6 ))
 
 #define pgoff_to_pte(off)	((pte_t) { (((off) & 0x07) << 1 ) | \
 					   (((off) & 0x38) << 2 ) | \
@@ -167,14 +167,14 @@
 /* Swap entries must have VALID and GLOBAL bits cleared. */
 #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
 #define __swp_type(x)		(((x).val >> 2) & 0x1f)
-#define __swp_offset(x) 	 ((x).val >> 7)
+#define __swp_offset(x)		 ((x).val >> 7)
 #define __swp_entry(type,offset)	\
-		((swp_entry_t)  { ((type) << 2) | ((offset) << 7) })
+		((swp_entry_t)	{ ((type) << 2) | ((offset) << 7) })
 #else
 #define __swp_type(x)		(((x).val >> 8) & 0x1f)
-#define __swp_offset(x) 	 ((x).val >> 13)
+#define __swp_offset(x)		 ((x).val >> 13)
 #define __swp_entry(type,offset)	\
-		((swp_entry_t)  { ((type) << 8) | ((offset) << 13) })
+		((swp_entry_t)	{ ((type) << 8) | ((offset) << 13) })
 #endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
 
 #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
@@ -184,7 +184,7 @@
 #define PTE_FILE_MAX_BITS	30
 
 #define pte_to_pgoff(_pte)	((_pte).pte_high >> 2)
-#define pgoff_to_pte(off) 	((pte_t) { _PAGE_FILE, (off) << 2 })
+#define pgoff_to_pte(off)	((pte_t) { _PAGE_FILE, (off) << 2 })
 
 #else
 /*
@@ -194,7 +194,7 @@
 
 #define pte_to_pgoff(_pte)	((((_pte).pte >> 1) & 0x7) | \
 				 (((_pte).pte >> 2) & 0x8) | \
-				 (((_pte).pte >> 8) <<  4))
+				 (((_pte).pte >> 8) <<	4))
 
 #define pgoff_to_pte(off)	((pte_t) { (((off) & 0x7) << 1) | \
 					   (((off) & 0x8) << 2) | \
@@ -208,7 +208,7 @@
 #define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
 #define __swp_entry_to_pte(x)	((pte_t) { 0, (x).val })
 #else
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 #endif
 
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
index 013d5f7..e1c49a9 100644
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -115,7 +115,7 @@
 #define PTRS_PER_PTE	((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
 
 #if PGDIR_SIZE >= TASK_SIZE64
-#define USER_PTRS_PER_PGD       (1)
+#define USER_PTRS_PER_PGD	(1)
 #else
 #define USER_PTRS_PER_PGD	(TASK_SIZE64 / PGDIR_SIZE)
 #endif
@@ -288,7 +288,7 @@
 #define __swp_type(x)		(((x).val >> 32) & 0xff)
 #define __swp_offset(x)		((x).val >> 40)
 #define __swp_entry(type, offset) ((swp_entry_t) { pte_val(mk_swap_pte((type), (offset))) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
 /*
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index f6a0439..32aea48 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -21,7 +21,7 @@
  * Similar to the Alpha port, we need to keep track of the ref
  * and mod bits in software.  We have a software "yeah you can read
  * from this page" bit, and a hardware one which actually lets the
- * process read from the page.  On the same token we have a software
+ * process read from the page.	On the same token we have a software
  * writable bit and the real hardware one which actually lets the
  * process write to the page, this keeps a mod bit via the hardware
  * dirty bit.
@@ -41,9 +41,9 @@
 #define _PAGE_GLOBAL		(1 << 0)
 #define _PAGE_VALID_SHIFT	1
 #define _PAGE_VALID		(1 << _PAGE_VALID_SHIFT)
-#define _PAGE_SILENT_READ	(1 << 1)  /* synonym                 */
+#define _PAGE_SILENT_READ	(1 << 1)  /* synonym		     */
 #define _PAGE_DIRTY_SHIFT	2
-#define _PAGE_DIRTY		(1 << _PAGE_DIRTY_SHIFT)  /* The MIPS dirty bit      */
+#define _PAGE_DIRTY		(1 << _PAGE_DIRTY_SHIFT)  /* The MIPS dirty bit	     */
 #define _PAGE_SILENT_WRITE	(1 << 2)
 #define _CACHE_SHIFT		3
 #define _CACHE_MASK		(7 << 3)
@@ -52,7 +52,7 @@
  * The following bits are implemented in software
  *
  * _PAGE_FILE semantics: set:pagecache unset:swap
- */ 
+ */
 #define _PAGE_PRESENT_SHIFT	6
 #define _PAGE_PRESENT		(1 << _PAGE_PRESENT_SHIFT)
 #define _PAGE_READ_SHIFT	7
@@ -134,7 +134,7 @@
 #define _PAGE_HUGE		(1 << _PAGE_HUGE_SHIFT)
 #else
 #define _PAGE_HUGE_SHIFT	(_PAGE_MODIFIED_SHIFT)
-#define _PAGE_HUGE		({BUG(); 1; })  /* Dummy value */
+#define _PAGE_HUGE		({BUG(); 1; })	/* Dummy value */
 #endif
 
 #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
@@ -143,7 +143,7 @@
 #define _PAGE_SPLITTING		(1 << _PAGE_SPLITTING_SHIFT)
 #else
 #define _PAGE_SPLITTING_SHIFT	(_PAGE_HUGE_SHIFT)
-#define _PAGE_SPLITTING		({BUG(); 1; })  /* Dummy value */
+#define _PAGE_SPLITTING		({BUG(); 1; })	/* Dummy value */
 #endif
 
 /* Page cannot be executed */
@@ -159,10 +159,10 @@
 
 #define _PAGE_VALID_SHIFT	(_PAGE_GLOBAL_SHIFT + 1)
 #define _PAGE_VALID		(1 << _PAGE_VALID_SHIFT)
-/* synonym                 */
+/* synonym		   */
 #define _PAGE_SILENT_READ	(_PAGE_VALID)
 
-/* The MIPS dirty bit      */
+/* The MIPS dirty bit	   */
 #define _PAGE_DIRTY_SHIFT	(_PAGE_VALID_SHIFT + 1)
 #define _PAGE_DIRTY		(1 << _PAGE_DIRTY_SHIFT)
 #define _PAGE_SILENT_WRITE	(_PAGE_DIRTY)
@@ -175,7 +175,7 @@
 #endif /* defined(CONFIG_64BIT_PHYS_ADDR && defined(CONFIG_CPU_MIPS32) */
 
 #ifndef _PFN_SHIFT
-#define _PFN_SHIFT                  PAGE_SHIFT
+#define _PFN_SHIFT		    PAGE_SHIFT
 #endif
 #define _PFN_MASK		(~((1 << (_PFN_SHIFT)) - 1))
 
@@ -230,28 +230,28 @@
 /* No penalty for being coherent on the SB1, so just
    use it for "noncoherent" spaces, too.  Shouldn't hurt. */
 
-#define _CACHE_UNCACHED             (2<<_CACHE_SHIFT)
-#define _CACHE_CACHABLE_COW         (5<<_CACHE_SHIFT)
+#define _CACHE_UNCACHED		    (2<<_CACHE_SHIFT)
+#define _CACHE_CACHABLE_COW	    (5<<_CACHE_SHIFT)
 #define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT)
 #define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)
 
 #else
 
-#define _CACHE_CACHABLE_NO_WA	    (0<<_CACHE_SHIFT)  /* R4600 only      */
-#define _CACHE_CACHABLE_WA	    (1<<_CACHE_SHIFT)  /* R4600 only      */
-#define _CACHE_UNCACHED             (2<<_CACHE_SHIFT)  /* R4[0246]00      */
-#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT)  /* R4[0246]00      */
-#define _CACHE_CACHABLE_CE          (4<<_CACHE_SHIFT)  /* R4[04]00MC only */
-#define _CACHE_CACHABLE_COW         (5<<_CACHE_SHIFT)  /* R4[04]00MC only */
-#define _CACHE_CACHABLE_COHERENT    (5<<_CACHE_SHIFT)  /* MIPS32R2 CMP    */
-#define _CACHE_CACHABLE_CUW         (6<<_CACHE_SHIFT)  /* R4[04]00MC only */
-#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)  /* R10000 only     */
+#define _CACHE_CACHABLE_NO_WA	    (0<<_CACHE_SHIFT)  /* R4600 only	  */
+#define _CACHE_CACHABLE_WA	    (1<<_CACHE_SHIFT)  /* R4600 only	  */
+#define _CACHE_UNCACHED		    (2<<_CACHE_SHIFT)  /* R4[0246]00	  */
+#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT)  /* R4[0246]00	  */
+#define _CACHE_CACHABLE_CE	    (4<<_CACHE_SHIFT)  /* R4[04]00MC only */
+#define _CACHE_CACHABLE_COW	    (5<<_CACHE_SHIFT)  /* R4[04]00MC only */
+#define _CACHE_CACHABLE_COHERENT    (5<<_CACHE_SHIFT)  /* MIPS32R2 CMP	  */
+#define _CACHE_CACHABLE_CUW	    (6<<_CACHE_SHIFT)  /* R4[04]00MC only */
+#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)  /* R10000 only	  */
 
 #endif
 
 #define __READABLE	(_PAGE_SILENT_READ | _PAGE_ACCESSED | (cpu_has_rixi ? 0 : _PAGE_READ))
 #define __WRITEABLE	(_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED)
 
-#define _PAGE_CHG_MASK  (_PFN_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK)
+#define _PAGE_CHG_MASK	(_PFN_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK)
 
 #endif /* _ASM_PGTABLE_BITS_H */
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index ec50d52..fdc62fb 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -112,7 +112,7 @@
 		 * it better already be global)
 		 */
 		if (pte_none(*buddy)) {
-			buddy->pte_low  |= _PAGE_GLOBAL;
+			buddy->pte_low	|= _PAGE_GLOBAL;
 			buddy->pte_high |= _PAGE_GLOBAL;
 		}
 	}
@@ -319,7 +319,7 @@
 static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
 
 /*
- * Macro to make mark a page protection value as "uncacheable".  Note
+ * Macro to make mark a page protection value as "uncacheable".	 Note
  * that "protection" is really a misnomer here as the protection value
  * contains the memory attribute bits, dirty bits, and various other
  * bits as well.
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index bd98b50..2a5fa7a 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -112,8 +112,8 @@
 typedef __u32 dspreg_t;
 
 struct mips_dsp_state {
-	dspreg_t        dspr[NUM_DSP_REGS];
-	unsigned int    dspcontrol;
+	dspreg_t	dspr[NUM_DSP_REGS];
+	unsigned int	dspcontrol;
 };
 
 #define INIT_CPUMASK { \
@@ -137,46 +137,46 @@
 
 struct octeon_cop2_state {
 	/* DMFC2 rt, 0x0201 */
-	unsigned long   cop2_crc_iv;
+	unsigned long	cop2_crc_iv;
 	/* DMFC2 rt, 0x0202 (Set with DMTC2 rt, 0x1202) */
-	unsigned long   cop2_crc_length;
+	unsigned long	cop2_crc_length;
 	/* DMFC2 rt, 0x0200 (set with DMTC2 rt, 0x4200) */
-	unsigned long   cop2_crc_poly;
+	unsigned long	cop2_crc_poly;
 	/* DMFC2 rt, 0x0402; DMFC2 rt, 0x040A */
-	unsigned long   cop2_llm_dat[2];
+	unsigned long	cop2_llm_dat[2];
        /* DMFC2 rt, 0x0084 */
-	unsigned long   cop2_3des_iv;
+	unsigned long	cop2_3des_iv;
 	/* DMFC2 rt, 0x0080; DMFC2 rt, 0x0081; DMFC2 rt, 0x0082 */
-	unsigned long   cop2_3des_key[3];
+	unsigned long	cop2_3des_key[3];
 	/* DMFC2 rt, 0x0088 (Set with DMTC2 rt, 0x0098) */
-	unsigned long   cop2_3des_result;
+	unsigned long	cop2_3des_result;
 	/* DMFC2 rt, 0x0111 (FIXME: Read Pass1 Errata) */
-	unsigned long   cop2_aes_inp0;
+	unsigned long	cop2_aes_inp0;
 	/* DMFC2 rt, 0x0102; DMFC2 rt, 0x0103 */
-	unsigned long   cop2_aes_iv[2];
+	unsigned long	cop2_aes_iv[2];
 	/* DMFC2 rt, 0x0104; DMFC2 rt, 0x0105; DMFC2 rt, 0x0106; DMFC2
 	 * rt, 0x0107 */
-	unsigned long   cop2_aes_key[4];
+	unsigned long	cop2_aes_key[4];
 	/* DMFC2 rt, 0x0110 */
-	unsigned long   cop2_aes_keylen;
+	unsigned long	cop2_aes_keylen;
 	/* DMFC2 rt, 0x0100; DMFC2 rt, 0x0101 */
-	unsigned long   cop2_aes_result[2];
+	unsigned long	cop2_aes_result[2];
 	/* DMFC2 rt, 0x0240; DMFC2 rt, 0x0241; DMFC2 rt, 0x0242; DMFC2
 	 * rt, 0x0243; DMFC2 rt, 0x0244; DMFC2 rt, 0x0245; DMFC2 rt,
 	 * 0x0246; DMFC2 rt, 0x0247; DMFC2 rt, 0x0248; DMFC2 rt,
 	 * 0x0249; DMFC2 rt, 0x024A; DMFC2 rt, 0x024B; DMFC2 rt,
 	 * 0x024C; DMFC2 rt, 0x024D; DMFC2 rt, 0x024E - Pass2 */
-	unsigned long   cop2_hsh_datw[15];
+	unsigned long	cop2_hsh_datw[15];
 	/* DMFC2 rt, 0x0250; DMFC2 rt, 0x0251; DMFC2 rt, 0x0252; DMFC2
 	 * rt, 0x0253; DMFC2 rt, 0x0254; DMFC2 rt, 0x0255; DMFC2 rt,
 	 * 0x0256; DMFC2 rt, 0x0257 - Pass2 */
-	unsigned long   cop2_hsh_ivw[8];
+	unsigned long	cop2_hsh_ivw[8];
 	/* DMFC2 rt, 0x0258; DMFC2 rt, 0x0259 - Pass2 */
-	unsigned long   cop2_gfm_mult[2];
+	unsigned long	cop2_gfm_mult[2];
 	/* DMFC2 rt, 0x025E - Pass2 */
-	unsigned long   cop2_gfm_poly;
+	unsigned long	cop2_gfm_poly;
 	/* DMFC2 rt, 0x025A; DMFC2 rt, 0x025B - Pass2 */
-	unsigned long   cop2_gfm_result[2];
+	unsigned long	cop2_gfm_result[2];
 };
 #define INIT_OCTEON_COP2 {0,}
 
@@ -249,9 +249,9 @@
 #endif /* CONFIG_CPU_CAVIUM_OCTEON */
 
 #define INIT_THREAD  {						\
-        /*							\
-         * Saved main processor registers			\
-         */							\
+	/*							\
+	 * Saved main processor registers			\
+	 */							\
 	.reg16			= 0,				\
 	.reg17			= 0,				\
 	.reg18			= 0,				\
@@ -332,7 +332,7 @@
  * aborts compilation on some CPUs.  It's simply not possible to unwind
  * some CPU's stackframes.
  *
- * __builtin_return_address works only for non-leaf functions.  We avoid the
+ * __builtin_return_address works only for non-leaf functions.	We avoid the
  * overhead of a function call by forcing the compiler to save the return
  * address register on the stack.
  */
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
index 54ea47d..a0b2650 100644
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -22,10 +22,10 @@
  * for indexed cache operations.  Two issues here:
  *
  *  - The MIPS32 and MIPS64 specs permit an implementation to directly derive
- *    the index bits from the virtual address.  This breaks with tradition
- *    set by the R4000.  To keep unpleasant surprises from happening we pick
+ *    the index bits from the virtual address.	This breaks with tradition
+ *    set by the R4000.	 To keep unpleasant surprises from happening we pick
  *    an address in KSEG0 / CKSEG0.
- *  - We need a properly sign extended address for 64-bit code.  To get away
+ *  - We need a properly sign extended address for 64-bit code.	 To get away
  *    without ifdefs we let the compiler do it by a type cast.
  */
 #define INDEX_BASE	CKSEG0
@@ -347,7 +347,7 @@
 	unsigned long end = start + current_cpu_data.desc.waysize;	\
 	unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit;	\
 	unsigned long ws_end = current_cpu_data.desc.ways <<		\
-	                       current_cpu_data.desc.waybit;		\
+			       current_cpu_data.desc.waybit;		\
 	unsigned long ws, addr;						\
 									\
 	__##pfx##flush_prologue						\
@@ -359,7 +359,7 @@
 	__##pfx##flush_epilogue						\
 }									\
 									\
-static inline void blast_##pfx##cache##lsize##_page(unsigned long page)	\
+static inline void blast_##pfx##cache##lsize##_page(unsigned long page) \
 {									\
 	unsigned long start = page;					\
 	unsigned long end = page + PAGE_SIZE;				\
@@ -381,7 +381,7 @@
 	unsigned long end = start + PAGE_SIZE;				\
 	unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit;	\
 	unsigned long ws_end = current_cpu_data.desc.ways <<		\
-	                       current_cpu_data.desc.waybit;		\
+			       current_cpu_data.desc.waybit;		\
 	unsigned long ws, addr;						\
 									\
 	__##pfx##flush_prologue						\
diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h
index 785a518..3c687df 100644
--- a/arch/mips/include/asm/regdef.h
+++ b/arch/mips/include/asm/regdef.h
@@ -19,44 +19,44 @@
 /*
  * Symbolic register names for 32 bit ABI
  */
-#define zero    $0      /* wired zero */
-#define AT      $1      /* assembler temp  - uppercase because of ".set at" */
-#define v0      $2      /* return value */
-#define v1      $3
-#define a0      $4      /* argument registers */
-#define a1      $5
-#define a2      $6
-#define a3      $7
-#define t0      $8      /* caller saved */
-#define t1      $9
-#define t2      $10
-#define t3      $11
-#define t4      $12
+#define zero	$0	/* wired zero */
+#define AT	$1	/* assembler temp  - uppercase because of ".set at" */
+#define v0	$2	/* return value */
+#define v1	$3
+#define a0	$4	/* argument registers */
+#define a1	$5
+#define a2	$6
+#define a3	$7
+#define t0	$8	/* caller saved */
+#define t1	$9
+#define t2	$10
+#define t3	$11
+#define t4	$12
 #define ta0	$12
-#define t5      $13
+#define t5	$13
 #define ta1	$13
-#define t6      $14
+#define t6	$14
 #define ta2	$14
-#define t7      $15
+#define t7	$15
 #define ta3	$15
-#define s0      $16     /* callee saved */
-#define s1      $17
-#define s2      $18
-#define s3      $19
-#define s4      $20
-#define s5      $21
-#define s6      $22
-#define s7      $23
-#define t8      $24     /* caller saved */
-#define t9      $25
-#define jp      $25     /* PIC jump register */
-#define k0      $26     /* kernel scratch */
-#define k1      $27
-#define gp      $28     /* global pointer */
-#define sp      $29     /* stack pointer */
-#define fp      $30     /* frame pointer */
+#define s0	$16	/* callee saved */
+#define s1	$17
+#define s2	$18
+#define s3	$19
+#define s4	$20
+#define s5	$21
+#define s6	$22
+#define s7	$23
+#define t8	$24	/* caller saved */
+#define t9	$25
+#define jp	$25	/* PIC jump register */
+#define k0	$26	/* kernel scratch */
+#define k1	$27
+#define gp	$28	/* global pointer */
+#define sp	$29	/* stack pointer */
+#define fp	$30	/* frame pointer */
 #define s8	$30	/* same like fp! */
-#define ra      $31     /* return address */
+#define ra	$31	/* return address */
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
diff --git a/arch/mips/include/asm/rtlx.h b/arch/mips/include/asm/rtlx.h
index 4ca3063..90985b61 100644
--- a/arch/mips/include/asm/rtlx.h
+++ b/arch/mips/include/asm/rtlx.h
@@ -38,7 +38,7 @@
 #define RTLX_BUFFER_SIZE 2048
 
 /* each channel supports read and write.
-   linux (vpe0) reads lx_buffer  and writes rt_buffer
+   linux (vpe0) reads lx_buffer	 and writes rt_buffer
    SP (vpe1) reads rt_buffer and writes lx_buffer
 */
 struct rtlx_channel {
diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h
index ae6306e..f29c75c 100644
--- a/arch/mips/include/asm/seccomp.h
+++ b/arch/mips/include/asm/seccomp.h
@@ -10,7 +10,7 @@
 /*
  * Kludge alert:
  *
- * The generic seccomp code currently allows only a single compat ABI.  Until
+ * The generic seccomp code currently allows only a single compat ABI.	Until
  * this is fixed we priorize O32 as the compat ABI over N32.
  */
 #ifdef CONFIG_MIPS32_O32
diff --git a/arch/mips/include/asm/sgi/gio.h b/arch/mips/include/asm/sgi/gio.h
index 889cf02..24be2b4 100644
--- a/arch/mips/include/asm/sgi/gio.h
+++ b/arch/mips/include/asm/sgi/gio.h
@@ -18,18 +18,18 @@
  * three physical connectors, but only two slots, GFX and EXP0.
  *
  * There is 10MB of GIO address space for GIO64 slot devices
- * slot#   slot type address range            size
+ * slot#   slot type address range	      size
  * -----   --------- ----------------------- -----
- *   0     GFX       0x1f000000 - 0x1f3fffff   4MB
- *   1     EXP0      0x1f400000 - 0x1f5fffff   2MB
- *   2     EXP1      0x1f600000 - 0x1f9fffff   4MB
+ *   0	   GFX	     0x1f000000 - 0x1f3fffff   4MB
+ *   1	   EXP0	     0x1f400000 - 0x1f5fffff   2MB
+ *   2	   EXP1	     0x1f600000 - 0x1f9fffff   4MB
  *
  * There are un-slotted devices, HPC, I/O and misc devices, which are grouped
  * into the HPC address space.
- *   -     MISC      0x1fb00000 - 0x1fbfffff   1MB
+ *   -	   MISC	     0x1fb00000 - 0x1fbfffff   1MB
  *
  * Following space is reserved and unused
- *   -     RESERVED  0x18000000 - 0x1effffff 112MB
+ *   -	   RESERVED  0x18000000 - 0x1effffff 112MB
  *
  * GIO bus IDs
  *
@@ -39,10 +39,10 @@
  * the slot undefined.
  *
  * 32-bit IDs are divided into
- *	bits 0:6        the product ID; ranges from 0x00 to 0x7F.
+ *	bits 0:6	the product ID; ranges from 0x00 to 0x7F.
  *	bit 7		0=GIO Product ID is 8 bits wide
  *			1=GIO Product ID is 32 bits wide.
- *	bits 8:15       manufacturer version for the product.
+ *	bits 8:15	manufacturer version for the product.
  *	bit 16		0=GIO32 and GIO32-bis, 1=GIO64.
  *	bit 17		0=no ROM present
  *			1=ROM present on this board AND next three words
diff --git a/arch/mips/include/asm/sgi/hpc3.h b/arch/mips/include/asm/sgi/hpc3.h
index c4729f5..59920b3 100644
--- a/arch/mips/include/asm/sgi/hpc3.h
+++ b/arch/mips/include/asm/sgi/hpc3.h
@@ -65,39 +65,39 @@
 	u32 _unused0[0x1000/4 - 2];	/* padding */
 	volatile u32 bcd;	/* byte count info */
 #define HPC3_SBCD_BCNTMSK 0x00003fff /* bytes to transfer from/to memory */
-#define HPC3_SBCD_XIE     0x00004000 /* Send IRQ when done with cur buf */
-#define HPC3_SBCD_EOX     0x00008000 /* Indicates this is last buf in chain */
+#define HPC3_SBCD_XIE	  0x00004000 /* Send IRQ when done with cur buf */
+#define HPC3_SBCD_EOX	  0x00008000 /* Indicates this is last buf in chain */
 
 	volatile u32 ctrl;    /* control register */
-#define HPC3_SCTRL_IRQ    0x01 /* IRQ asserted, either dma done or parity */
+#define HPC3_SCTRL_IRQ	  0x01 /* IRQ asserted, either dma done or parity */
 #define HPC3_SCTRL_ENDIAN 0x02 /* DMA endian mode, 0=big 1=little */
-#define HPC3_SCTRL_DIR    0x04 /* DMA direction, 1=dev2mem 0=mem2dev */
+#define HPC3_SCTRL_DIR	  0x04 /* DMA direction, 1=dev2mem 0=mem2dev */
 #define HPC3_SCTRL_FLUSH  0x08 /* Tells HPC3 to flush scsi fifos */
 #define HPC3_SCTRL_ACTIVE 0x10 /* SCSI DMA channel is active */
 #define HPC3_SCTRL_AMASK  0x20 /* DMA active inhibits PIO */
 #define HPC3_SCTRL_CRESET 0x40 /* Resets dma channel and external controller */
-#define HPC3_SCTRL_PERR   0x80 /* Bad parity on HPC3 iface to scsi controller */
+#define HPC3_SCTRL_PERR	  0x80 /* Bad parity on HPC3 iface to scsi controller */
 
 	volatile u32 gfptr;	/* current GIO fifo ptr */
 	volatile u32 dfptr;	/* current device fifo ptr */
 	volatile u32 dconfig;	/* DMA configuration register */
 #define HPC3_SDCFG_HCLK 0x00001 /* Enable DMA half clock mode */
-#define HPC3_SDCFG_D1   0x00006 /* Cycles to spend in D1 state */
-#define HPC3_SDCFG_D2   0x00038 /* Cycles to spend in D2 state */
-#define HPC3_SDCFG_D3   0x001c0 /* Cycles to spend in D3 state */
+#define HPC3_SDCFG_D1	0x00006 /* Cycles to spend in D1 state */
+#define HPC3_SDCFG_D2	0x00038 /* Cycles to spend in D2 state */
+#define HPC3_SDCFG_D3	0x001c0 /* Cycles to spend in D3 state */
 #define HPC3_SDCFG_HWAT 0x00e00 /* DMA high water mark */
-#define HPC3_SDCFG_HW   0x01000 /* Enable 16-bit halfword DMA accesses to scsi */
+#define HPC3_SDCFG_HW	0x01000 /* Enable 16-bit halfword DMA accesses to scsi */
 #define HPC3_SDCFG_SWAP 0x02000 /* Byte swap all DMA accesses */
 #define HPC3_SDCFG_EPAR 0x04000 /* Enable parity checking for DMA */
 #define HPC3_SDCFG_POLL 0x08000 /* hd_dreq polarity control */
 #define HPC3_SDCFG_ERLY 0x30000 /* hd_dreq behavior control bits */
 
 	volatile u32 pconfig;	/* PIO configuration register */
-#define HPC3_SPCFG_P3   0x0003 /* Cycles to spend in P3 state */
-#define HPC3_SPCFG_P2W  0x001c /* Cycles to spend in P2 state for writes */
-#define HPC3_SPCFG_P2R  0x01e0 /* Cycles to spend in P2 state for reads */
-#define HPC3_SPCFG_P1   0x0e00 /* Cycles to spend in P1 state */
-#define HPC3_SPCFG_HW   0x1000 /* Enable 16-bit halfword PIO accesses to scsi */
+#define HPC3_SPCFG_P3	0x0003 /* Cycles to spend in P3 state */
+#define HPC3_SPCFG_P2W	0x001c /* Cycles to spend in P2 state for writes */
+#define HPC3_SPCFG_P2R	0x01e0 /* Cycles to spend in P2 state for reads */
+#define HPC3_SPCFG_P1	0x0e00 /* Cycles to spend in P1 state */
+#define HPC3_SPCFG_HW	0x1000 /* Enable 16-bit halfword PIO accesses to scsi */
 #define HPC3_SPCFG_SWAP 0x2000 /* Byte swap all PIO accesses */
 #define HPC3_SPCFG_EPAR 0x4000 /* Enable parity checking for PIO */
 #define HPC3_SPCFG_FUJI 0x8000 /* Fujitsu scsi controller mode for faster dma/pio */
@@ -108,13 +108,13 @@
 /* SEEQ ethernet HPC3 registers, only one seeq per HPC3. */
 struct hpc3_ethregs {
 	/* Receiver registers. */
-	volatile u32 rx_cbptr;   /* current dma buffer ptr, diagnostic use only */
-	volatile u32 rx_ndptr;   /* next dma descriptor ptr */
+	volatile u32 rx_cbptr;	 /* current dma buffer ptr, diagnostic use only */
+	volatile u32 rx_ndptr;	 /* next dma descriptor ptr */
 	u32 _unused0[0x1000/4 - 2];	/* padding */
 	volatile u32 rx_bcd;	/* byte count info */
 #define HPC3_ERXBCD_BCNTMSK 0x00003fff /* bytes to be sent to memory */
-#define HPC3_ERXBCD_XIE     0x20000000 /* HPC3 interrupts cpu at end of this buf */
-#define HPC3_ERXBCD_EOX     0x80000000 /* flags this as end of descriptor chain */
+#define HPC3_ERXBCD_XIE	    0x20000000 /* HPC3 interrupts cpu at end of this buf */
+#define HPC3_ERXBCD_EOX	    0x80000000 /* flags this as end of descriptor chain */
 
 	volatile u32 rx_ctrl;	/* control register */
 #define HPC3_ERXCTRL_STAT50 0x0000003f /* Receive status reg bits of Seeq8003 */
@@ -131,23 +131,23 @@
 	volatile u32 reset;	/* reset register */
 #define HPC3_ERST_CRESET 0x1	/* Reset dma channel and external controller */
 #define HPC3_ERST_CLRIRQ 0x2	/* Clear channel interrupt */
-#define HPC3_ERST_LBACK  0x4	/* Enable diagnostic loopback mode of Seeq8003 */
+#define HPC3_ERST_LBACK	 0x4	/* Enable diagnostic loopback mode of Seeq8003 */
 
-	volatile u32 dconfig;    /* DMA configuration register */
-#define HPC3_EDCFG_D1    0x0000f /* Cycles to spend in D1 state for PIO */
-#define HPC3_EDCFG_D2    0x000f0 /* Cycles to spend in D2 state for PIO */
-#define HPC3_EDCFG_D3    0x00f00 /* Cycles to spend in D3 state for PIO */
+	volatile u32 dconfig;	 /* DMA configuration register */
+#define HPC3_EDCFG_D1	 0x0000f /* Cycles to spend in D1 state for PIO */
+#define HPC3_EDCFG_D2	 0x000f0 /* Cycles to spend in D2 state for PIO */
+#define HPC3_EDCFG_D3	 0x00f00 /* Cycles to spend in D3 state for PIO */
 #define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
 #define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
-#define HPC3_EDCFG_FEOP  0x04000 /* Bad packet marker timeout enable */
-#define HPC3_EDCFG_FIRQ  0x08000 /* Another bad packet timeout enable */
-#define HPC3_EDCFG_PTO   0x30000 /* Programmed timeout value for above two */
+#define HPC3_EDCFG_FEOP	 0x04000 /* Bad packet marker timeout enable */
+#define HPC3_EDCFG_FIRQ	 0x08000 /* Another bad packet timeout enable */
+#define HPC3_EDCFG_PTO	 0x30000 /* Programmed timeout value for above two */
 
-	volatile u32 pconfig;   /* PIO configuration register */
-#define HPC3_EPCFG_P1    0x000f /* Cycles to spend in P1 state for PIO */
-#define HPC3_EPCFG_P2    0x00f0 /* Cycles to spend in P2 state for PIO */
-#define HPC3_EPCFG_P3    0x0f00 /* Cycles to spend in P3 state for PIO */
-#define HPC3_EPCFG_TST   0x1000 /* Diagnistic ram test feature bit */
+	volatile u32 pconfig;	/* PIO configuration register */
+#define HPC3_EPCFG_P1	 0x000f /* Cycles to spend in P1 state for PIO */
+#define HPC3_EPCFG_P2	 0x00f0 /* Cycles to spend in P2 state for PIO */
+#define HPC3_EPCFG_P3	 0x0f00 /* Cycles to spend in P3 state for PIO */
+#define HPC3_EPCFG_TST	 0x1000 /* Diagnistic ram test feature bit */
 
 	u32 _unused2[0x1000/4 - 8];	/* padding */
 
@@ -158,9 +158,9 @@
 	volatile u32 tx_bcd;		/* byte count info */
 #define HPC3_ETXBCD_BCNTMSK 0x00003fff	/* bytes to be read from memory */
 #define HPC3_ETXBCD_ESAMP   0x10000000	/* if set, too late to add descriptor */
-#define HPC3_ETXBCD_XIE     0x20000000	/* Interrupt cpu at end of cur desc */
-#define HPC3_ETXBCD_EOP     0x40000000	/* Last byte of cur buf is end of packet */
-#define HPC3_ETXBCD_EOX     0x80000000	/* This buf is the end of desc chain */
+#define HPC3_ETXBCD_XIE	    0x20000000	/* Interrupt cpu at end of cur desc */
+#define HPC3_ETXBCD_EOP	    0x40000000	/* Last byte of cur buf is end of packet */
+#define HPC3_ETXBCD_EOX	    0x80000000	/* This buf is the end of desc chain */
 
 	volatile u32 tx_ctrl;		/* control register */
 #define HPC3_ETXCTRL_STAT30 0x0000000f	/* Rdonly copy of seeq tx stat reg */
@@ -215,10 +215,10 @@
 
 	volatile u32 istat1;		/* Irq status, only bits <9:5> reliable. */
 	volatile u32 bestat;		/* Bus error interrupt status reg. */
-#define HPC3_BESTAT_BLMASK	0x000ff	/* Bus lane where bad parity occurred */
-#define HPC3_BESTAT_CTYPE	0x00100	/* Bus cycle type, 0=PIO 1=DMA */
+#define HPC3_BESTAT_BLMASK	0x000ff /* Bus lane where bad parity occurred */
+#define HPC3_BESTAT_CTYPE	0x00100 /* Bus cycle type, 0=PIO 1=DMA */
 #define HPC3_BESTAT_PIDSHIFT	9
-#define HPC3_BESTAT_PIDMASK	0x3f700	/* DMA channel parity identifier */
+#define HPC3_BESTAT_PIDMASK	0x3f700 /* DMA channel parity identifier */
 
 	u32 _unused1[0x14000/4 - 5];	/* padding */
 
@@ -259,7 +259,7 @@
 #define HPC3_DMACFG_RTIME		0x00200000
 	/* 5 bit burst count for DMA device */
 #define HPC3_DMACFG_BURST_MASK		0x07c00000
-#define HPC3_DMACFG_BURST_SHIFT	22
+#define HPC3_DMACFG_BURST_SHIFT 22
 	/* Use live pbus_dreq unsynchronized signal */
 #define HPC3_DMACFG_DRQLIVE		0x08000000
 	volatile u32 pbus_piocfg[16][64];
@@ -288,20 +288,20 @@
 
 	/* PBUS PROM control regs. */
 	volatile u32 pbus_promwe;	/* PROM write enable register */
-#define HPC3_PROM_WENAB	0x1	/* Enable writes to the PROM */
+#define HPC3_PROM_WENAB 0x1	/* Enable writes to the PROM */
 
 	u32 _unused5[0x0800/4 - 1];
 	volatile u32 pbus_promswap;	/* Chip select swap reg */
 #define HPC3_PROM_SWAP	0x1	/* invert GIO addr bit to select prom0 or prom1 */
 
 	u32 _unused6[0x0800/4 - 1];
-	volatile u32 pbus_gout;	/* PROM general purpose output reg */
+	volatile u32 pbus_gout; /* PROM general purpose output reg */
 #define HPC3_PROM_STAT	0x1	/* General purpose status bit in gout */
 
 	u32 _unused7[0x1000/4 - 1];
 	volatile u32 rtcregs[14];	/* Dallas clock registers */
 	u32 _unused8[50];
-	volatile u32 bbram[8192-50-14];	/* Battery backed ram */
+	volatile u32 bbram[8192-50-14]; /* Battery backed ram */
 };
 
 /*
diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h
index 380347b..53c6b1c 100644
--- a/arch/mips/include/asm/sgi/ioc.h
+++ b/arch/mips/include/asm/sgi/ioc.h
@@ -138,7 +138,7 @@
 	u8 _sysid[3];
 	volatile u8 sysid;
 #define SGIOC_SYSID_FULLHOUSE	0x01
-#define SGIOC_SYSID_BOARDREV(x)	(((x) & 0x1e) >> 1)
+#define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1)
 #define SGIOC_SYSID_CHIPREV(x)	(((x) & 0xe0) >> 5)
 	u32 _unused2;
 	u8 _read[3];
@@ -150,7 +150,7 @@
 #define SGIOC_DMASEL_ISDNB	0x01	/* enable isdn B */
 #define SGIOC_DMASEL_ISDNA	0x02	/* enable isdn A */
 #define SGIOC_DMASEL_PPORT	0x04	/* use parallel DMA */
-#define SGIOC_DMASEL_SCLK667MHZ	0x10	/* use 6.67MHZ serial clock */
+#define SGIOC_DMASEL_SCLK667MHZ 0x10	/* use 6.67MHZ serial clock */
 #define SGIOC_DMASEL_SCLKEXT	0x20	/* use external serial clock */
 	u32 _unused4;
 	u8 _reset[3];
diff --git a/arch/mips/include/asm/sgi/ip22.h b/arch/mips/include/asm/sgi/ip22.h
index c0501f9..8db1a35 100644
--- a/arch/mips/include/asm/sgi/ip22.h
+++ b/arch/mips/include/asm/sgi/ip22.h
@@ -38,8 +38,8 @@
 
 #define SGI_SOFT_0_IRQ	SGINT_CPU + 0
 #define SGI_SOFT_1_IRQ	SGINT_CPU + 1
-#define SGI_LOCAL_0_IRQ	SGINT_CPU + 2
-#define SGI_LOCAL_1_IRQ	SGINT_CPU + 3
+#define SGI_LOCAL_0_IRQ SGINT_CPU + 2
+#define SGI_LOCAL_1_IRQ SGINT_CPU + 3
 #define SGI_8254_0_IRQ	SGINT_CPU + 4
 #define SGI_8254_1_IRQ	SGINT_CPU + 5
 #define SGI_BUSERR_IRQ	SGINT_CPU + 6
@@ -51,7 +51,7 @@
 #define SGI_WD93_1_IRQ	SGINT_LOCAL0 + 2	/* 2nd onboard WD93 */
 #define SGI_ENET_IRQ	SGINT_LOCAL0 + 3	/* onboard ethernet */
 #define SGI_MCDMA_IRQ	SGINT_LOCAL0 + 4	/* MC DMA done */
-#define SGI_PARPORT_IRQ	SGINT_LOCAL0 + 5	/* Parallel port */
+#define SGI_PARPORT_IRQ SGINT_LOCAL0 + 5	/* Parallel port */
 #define SGI_GIO_1_IRQ	SGINT_LOCAL0 + 6	/* GE / GIO-1 / 2nd-HPC */
 #define SGI_MAP_0_IRQ	SGINT_LOCAL0 + 7	/* Mappable interrupt 0 */
 
diff --git a/arch/mips/include/asm/sgi/mc.h b/arch/mips/include/asm/sgi/mc.h
index 1576c23..3a070ce 100644
--- a/arch/mips/include/asm/sgi/mc.h
+++ b/arch/mips/include/asm/sgi/mc.h
@@ -29,10 +29,10 @@
 #define SGIMC_CCTRL0_IENAB	0x00002000 /* Allow interrupts from MC */
 #define SGIMC_CCTRL0_ESNOOP	0x00004000 /* Snooping I/O enable */
 #define SGIMC_CCTRL0_EPROMWR	0x00008000 /* Prom writes from cpu enable */
-#define SGIMC_CCTRL0_WRESETPMEM	0x00010000 /* Perform warm reset, preserves mem */
+#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */
 #define SGIMC_CCTRL0_LENDIAN	0x00020000 /* Put MC in little-endian mode */
-#define SGIMC_CCTRL0_WRESETDMEM	0x00040000 /* Warm reset, destroys mem contents */
-#define SGIMC_CCTRL0_CMEMBADPAR	0x02000000 /* Generate bad perr from cpu to mem */
+#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */
+#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */
 #define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */
 #define SGIMC_CCTRL0_GIOBTOB	0x08000000 /* Allow GIO back to back writes */
 	u32 _unused1;
@@ -40,13 +40,13 @@
 #define SGIMC_CCTRL1_EGIOTIMEO	0x00000010 /* GIO bus timeout enable */
 #define SGIMC_CCTRL1_FIXEDEHPC	0x00001000 /* Fixed HPC endianness */
 #define SGIMC_CCTRL1_LITTLEHPC	0x00002000 /* Little endian HPC */
-#define SGIMC_CCTRL1_FIXEDEEXP0	0x00004000 /* Fixed EXP0 endianness */
-#define SGIMC_CCTRL1_LITTLEEXP0	0x00008000 /* Little endian EXP0 */
-#define SGIMC_CCTRL1_FIXEDEEXP1	0x00010000 /* Fixed EXP1 endianness */
-#define SGIMC_CCTRL1_LITTLEEXP1	0x00020000 /* Little endian EXP1 */
+#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */
+#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */
 
 	u32 _unused2;
-	volatile u32 watchdogt;	/* Watchdog reg rdonly, write clears */
+	volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */
 
 	u32 _unused3;
 	volatile u32 systemid;	/* MC system ID register, readonly */
@@ -81,11 +81,11 @@
 #define SGIMC_GIOPAR_RTIMEGFX	0x00000040 /* GFX device has realtime attr */
 #define SGIMC_GIOPAR_RTIMEEXP0	0x00000080 /* EXP(slot0) has realtime attr */
 #define SGIMC_GIOPAR_RTIMEEXP1	0x00000100 /* EXP(slot1) has realtime attr */
-#define SGIMC_GIOPAR_MASTEREISA	0x00000200 /* EISA bus can act as bus master */
+#define SGIMC_GIOPAR_MASTEREISA 0x00000200 /* EISA bus can act as bus master */
 #define SGIMC_GIOPAR_ONEBUS	0x00000400 /* Exists one GIO64 pipelined bus */
 #define SGIMC_GIOPAR_MASTERGFX	0x00000800 /* GFX can act as a bus master */
-#define SGIMC_GIOPAR_MASTEREXP0	0x00001000 /* EXP(slot0) can bus master */
-#define SGIMC_GIOPAR_MASTEREXP1	0x00002000 /* EXP(slot1) can bus master */
+#define SGIMC_GIOPAR_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */
+#define SGIMC_GIOPAR_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */
 #define SGIMC_GIOPAR_PLINEEXP0	0x00004000 /* EXP(slot0) has pipeline attr */
 #define SGIMC_GIOPAR_PLINEEXP1	0x00008000 /* EXP(slot1) has pipeline attr */
 
@@ -107,9 +107,9 @@
 #define SGIMC_MCONFIG_SBANKS	0x00004000 /* Number of subbanks */
 
 	u32 _unused13;
-	volatile u32 cmacc;        /* Mem access config for CPU */
+	volatile u32 cmacc;	   /* Mem access config for CPU */
 	u32 _unused14;
-	volatile u32 gmacc;        /* Mem access config for GIO */
+	volatile u32 gmacc;	   /* Mem access config for GIO */
 
 	/* This define applies to both cmacc and gmacc registers above. */
 #define SGIMC_MACC_ALIASBIG	0x20000000 /* 512MB home for alias */
diff --git a/arch/mips/include/asm/sgi/pi1.h b/arch/mips/include/asm/sgi/pi1.h
index c950691..96b1a07 100644
--- a/arch/mips/include/asm/sgi/pi1.h
+++ b/arch/mips/include/asm/sgi/pi1.h
@@ -28,16 +28,16 @@
 #define PI1_STAT_BUSY		0x80
 	u8 _dmactrl[3];
 	volatile u8 dmactrl;
-#define PI1_DMACTRL_FIFO_EMPTY	0x01    /* fifo empty R/O */
-#define PI1_DMACTRL_ABORT	0x02    /* reset DMA and internal fifo W/O */
-#define PI1_DMACTRL_STDMODE	0x00    /* bits 2-3 */
-#define PI1_DMACTRL_SGIMODE	0x04    /* bits 2-3 */
-#define PI1_DMACTRL_RICOHMODE	0x08    /* bits 2-3 */
-#define PI1_DMACTRL_HPMODE	0x0c    /* bits 2-3 */
-#define PI1_DMACTRL_BLKMODE	0x10    /* block mode */
-#define PI1_DMACTRL_FIFO_CLEAR	0x20    /* clear fifo W/O */
-#define PI1_DMACTRL_READ	0x40    /* read */
-#define PI1_DMACTRL_RUN		0x80    /* pedal to the metal */
+#define PI1_DMACTRL_FIFO_EMPTY	0x01	/* fifo empty R/O */
+#define PI1_DMACTRL_ABORT	0x02	/* reset DMA and internal fifo W/O */
+#define PI1_DMACTRL_STDMODE	0x00	/* bits 2-3 */
+#define PI1_DMACTRL_SGIMODE	0x04	/* bits 2-3 */
+#define PI1_DMACTRL_RICOHMODE	0x08	/* bits 2-3 */
+#define PI1_DMACTRL_HPMODE	0x0c	/* bits 2-3 */
+#define PI1_DMACTRL_BLKMODE	0x10	/* block mode */
+#define PI1_DMACTRL_FIFO_CLEAR	0x20	/* clear fifo W/O */
+#define PI1_DMACTRL_READ	0x40	/* read */
+#define PI1_DMACTRL_RUN		0x80	/* pedal to the metal */
 	u8 _intstat[3];
 	volatile u8 intstat;
 #define PI1_INTSTAT_ACK		0x04
diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h
index f581157..753275a 100644
--- a/arch/mips/include/asm/sgialib.h
+++ b/arch/mips/include/asm/sgialib.h
@@ -37,7 +37,7 @@
  * in chain is CURR is NULL.
  */
 extern struct linux_mdesc *prom_getmdesc(struct linux_mdesc *curr);
-#define PROM_NULL_MDESC   ((struct linux_mdesc *) 0)
+#define PROM_NULL_MDESC	  ((struct linux_mdesc *) 0)
 
 /* Called by prom_init to setup the physical memory pmemblock
  * array.
diff --git a/arch/mips/include/asm/sgiarcs.h b/arch/mips/include/asm/sgiarcs.h
index 3dce7c7..26ddfff 100644
--- a/arch/mips/include/asm/sgiarcs.h
+++ b/arch/mips/include/asm/sgiarcs.h
@@ -16,33 +16,33 @@
 #include <asm/fw/arc/types.h>
 
 /* Various ARCS error codes. */
-#define PROM_ESUCCESS                   0x00
-#define PROM_E2BIG                      0x01
-#define PROM_EACCESS                    0x02
-#define PROM_EAGAIN                     0x03
-#define PROM_EBADF                      0x04
-#define PROM_EBUSY                      0x05
-#define PROM_EFAULT                     0x06
-#define PROM_EINVAL                     0x07
-#define PROM_EIO                        0x08
-#define PROM_EISDIR                     0x09
-#define PROM_EMFILE                     0x0a
-#define PROM_EMLINK                     0x0b
-#define PROM_ENAMETOOLONG               0x0c
-#define PROM_ENODEV                     0x0d
-#define PROM_ENOENT                     0x0e
-#define PROM_ENOEXEC                    0x0f
-#define PROM_ENOMEM                     0x10
-#define PROM_ENOSPC                     0x11
-#define PROM_ENOTDIR                    0x12
-#define PROM_ENOTTY                     0x13
-#define PROM_ENXIO                      0x14
-#define PROM_EROFS                      0x15
+#define PROM_ESUCCESS			0x00
+#define PROM_E2BIG			0x01
+#define PROM_EACCESS			0x02
+#define PROM_EAGAIN			0x03
+#define PROM_EBADF			0x04
+#define PROM_EBUSY			0x05
+#define PROM_EFAULT			0x06
+#define PROM_EINVAL			0x07
+#define PROM_EIO			0x08
+#define PROM_EISDIR			0x09
+#define PROM_EMFILE			0x0a
+#define PROM_EMLINK			0x0b
+#define PROM_ENAMETOOLONG		0x0c
+#define PROM_ENODEV			0x0d
+#define PROM_ENOENT			0x0e
+#define PROM_ENOEXEC			0x0f
+#define PROM_ENOMEM			0x10
+#define PROM_ENOSPC			0x11
+#define PROM_ENOTDIR			0x12
+#define PROM_ENOTTY			0x13
+#define PROM_ENXIO			0x14
+#define PROM_EROFS			0x15
 /* SGI ARCS specific errno's. */
-#define PROM_EADDRNOTAVAIL              0x1f
-#define PROM_ETIMEDOUT                  0x20
-#define PROM_ECONNABORTED               0x21
-#define PROM_ENOCONNECT                 0x22
+#define PROM_EADDRNOTAVAIL		0x1f
+#define PROM_ETIMEDOUT			0x20
+#define PROM_ECONNABORTED		0x21
+#define PROM_ENOCONNECT			0x22
 
 /* Device classes, types, and identifiers for prom
  * device inventory queries.
@@ -77,14 +77,14 @@
 
 /* A prom device tree component. */
 struct linux_component {
-	enum linux_devclass     class;	/* node class */
-	enum linux_devtypes     type;	/* node type */
-	enum linux_identifier   iflags;	/* node flags */
-	USHORT 			vers;	/* node version */
-	USHORT 			rev;	/* node revision */
-	ULONG 			key;	/* completely magic */
-	ULONG 			amask;	/* XXX affinity mask??? */
-	ULONG			cdsize;	/* size of configuration data */
+	enum linux_devclass	class;	/* node class */
+	enum linux_devtypes	type;	/* node type */
+	enum linux_identifier	iflags; /* node flags */
+	USHORT			vers;	/* node version */
+	USHORT			rev;	/* node revision */
+	ULONG			key;	/* completely magic */
+	ULONG			amask;	/* XXX affinity mask??? */
+	ULONG			cdsize; /* size of configuration data */
 	ULONG			ilen;	/* length of string identifier */
 	_PULONG			iname;	/* string identifier */
 };
@@ -177,13 +177,13 @@
 	struct linux_bigint   end;
 	struct linux_bigint   cur;
 	enum linux_devtypes   dtype;
-	unsigned long         namelen;
-	unsigned char         attr;
-	char                  name[32]; /* XXX imperical, should be define */
+	unsigned long	      namelen;
+	unsigned char	      attr;
+	char		      name[32]; /* XXX imperical, should be define */
 };
 
 /* This describes the vector containing function pointers to the ARC
-   firmware functions.  */
+   firmware functions.	*/
 struct linux_romvec {
 	LONG	load;			/* Load an executable image. */
 	LONG	invoke;			/* Invoke a standalong image. */
@@ -244,7 +244,7 @@
  */
 typedef struct _SYSTEM_PARAMETER_BLOCK {
 	ULONG			magic;		/* magic cookie */
-#define PROMBLOCK_MAGIC      0x53435241
+#define PROMBLOCK_MAGIC	     0x53435241
 
 	ULONG			len;		/* length of parm block */
 	USHORT			ver;		/* ARCS firmware version */
@@ -294,16 +294,16 @@
 };
 
 /* Common SGI ARCS firmware file descriptors. */
-#define SGIPROM_STDIN     0
-#define SGIPROM_STDOUT    1
+#define SGIPROM_STDIN	  0
+#define SGIPROM_STDOUT	  1
 
 /* Common SGI ARCS firmware file types. */
-#define SGIPROM_ROFILE    0x01  /* read-only file */
-#define SGIPROM_HFILE     0x02  /* hidden file */
-#define SGIPROM_SFILE     0x04  /* System file */
-#define SGIPROM_AFILE     0x08  /* Archive file */
-#define SGIPROM_DFILE     0x10  /* Directory file */
-#define SGIPROM_DELFILE   0x20  /* Deleted file */
+#define SGIPROM_ROFILE	  0x01	/* read-only file */
+#define SGIPROM_HFILE	  0x02	/* hidden file */
+#define SGIPROM_SFILE	  0x04	/* System file */
+#define SGIPROM_AFILE	  0x08	/* Archive file */
+#define SGIPROM_DFILE	  0x10	/* Directory file */
+#define SGIPROM_DELFILE	  0x20	/* Deleted file */
 
 /* SGI ARCS boot record information. */
 struct sgi_partition {
@@ -318,7 +318,7 @@
 	unsigned char tsect0, tsect1, tsect2, tsect3;
 };
 
-#define SGIBBLOCK_MAGIC   0xaa55
+#define SGIBBLOCK_MAGIC	  0xaa55
 #define SGIBBLOCK_MAXPART 0x0004
 
 struct sgi_bootblock {
@@ -332,34 +332,34 @@
 	unsigned short bytes_sect;    /* bytes per sector */
 	unsigned char  sect_clust;    /* sectors per cluster */
 	unsigned short sect_resv;     /* reserved sectors */
-	unsigned char  nfats;         /* # of allocation tables */
+	unsigned char  nfats;	      /* # of allocation tables */
 	unsigned short nroot_dirents; /* # of root directory entries */
 	unsigned short sect_volume;   /* sectors in volume */
 	unsigned char  media_type;    /* media descriptor */
 	unsigned short sect_fat;      /* sectors per allocation table */
 	unsigned short sect_track;    /* sectors per track */
-	unsigned short nheads;        /* # of heads */
-	unsigned short nhsects;       /* # of hidden sectors */
+	unsigned short nheads;	      /* # of heads */
+	unsigned short nhsects;	      /* # of hidden sectors */
 };
 
 struct sgi_bsector {
-	unsigned char   jmpinfo[3];
-	unsigned char   manuf_name[8];
+	unsigned char	jmpinfo[3];
+	unsigned char	manuf_name[8];
 	struct sgi_bparm_block info;
 };
 
 /* Debugging block used with SGI symmon symbolic debugger. */
-#define SMB_DEBUG_MAGIC   0xfeeddead
+#define SMB_DEBUG_MAGIC	  0xfeeddead
 struct linux_smonblock {
-	unsigned long   magic;
-	void            (*handler)(void);  /* Breakpoint routine. */
-	unsigned long   dtable_base;       /* Base addr of dbg table. */
-	int             (*printf)(const char *fmt, ...);
-	unsigned long   btable_base;       /* Breakpoint table. */
-	unsigned long   mpflushreqs;       /* SMP cache flush request list. */
-	unsigned long   ntab;              /* Name table. */
-	unsigned long   stab;              /* Symbol table. */
-	int             smax;              /* Max # of symbols. */
+	unsigned long	magic;
+	void		(*handler)(void);  /* Breakpoint routine. */
+	unsigned long	dtable_base;	   /* Base addr of dbg table. */
+	int		(*printf)(const char *fmt, ...);
+	unsigned long	btable_base;	   /* Breakpoint table. */
+	unsigned long	mpflushreqs;	   /* SMP cache flush request list. */
+	unsigned long	ntab;		   /* Name table. */
+	unsigned long	stab;		   /* Symbol table. */
+	int		smax;		   /* Max # of symbols. */
 };
 
 /*
@@ -369,7 +369,7 @@
 #if defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC32)
 
 #define __arc_clobbers							\
-	"$2", "$3" /* ... */, "$8", "$9", "$10", "$11", 			\
+	"$2", "$3" /* ... */, "$8", "$9", "$10", "$11",				\
 	"$12", "$13", "$14", "$15", "$16", "$24", "$25", "$31"
 
 #define ARC_CALL0(dest)							\
@@ -447,7 +447,7 @@
 	"daddu\t$29, 32\n\t"						\
 	"move\t%0, $2"							\
 	: "=r" (__res), "=r" (__vec)					\
-	: "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3), 		\
+	: "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3),		\
 	  "r" (__a4)							\
 	: __arc_clobbers);						\
 	__res;								\
@@ -468,8 +468,8 @@
 	"daddu\t$29, 32\n\t"						\
 	"move\t%0, $2"							\
 	: "=r" (__res), "=r" (__vec)					\
-	: "1" (__vec), 							\
-	  "r" (__a1), "r" (__a2), "r" (__a3), "r" (__a4), 		\
+	: "1" (__vec),							\
+	  "r" (__a1), "r" (__a2), "r" (__a3), "r" (__a4),		\
 	  "r" (__a5)							\
 	: __arc_clobbers);						\
 	__res;								\
@@ -512,7 +512,7 @@
 	long __a1 = (long) (a1);					\
 	long __a2 = (long) (a2);					\
 	long __a3 = (long) (a3);					\
-	long (*__vec)(long, long, long)	= (void *) romvec->dest;	\
+	long (*__vec)(long, long, long) = (void *) romvec->dest;	\
 									\
 	__res = __vec(__a1, __a2, __a3);				\
 	__res;								\
diff --git a/arch/mips/include/asm/shmparam.h b/arch/mips/include/asm/shmparam.h
index 0929072..324d040 100644
--- a/arch/mips/include/asm/shmparam.h
+++ b/arch/mips/include/asm/shmparam.h
@@ -8,6 +8,6 @@
 
 #define __ARCH_FORCE_SHMLBA	1
 
-#define	SHMLBA 0x40000			/* attach addr a multiple of this */
+#define SHMLBA 0x40000			/* attach addr a multiple of this */
 
 #endif /* _ASM_SHMPARAM_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_int.h b/arch/mips/include/asm/sibyte/bcm1480_int.h
index fffb224..6b82ed3 100644
--- a/arch/mips/include/asm/sibyte/bcm1480_int.h
+++ b/arch/mips/include/asm/sibyte/bcm1480_int.h
@@ -60,253 +60,253 @@
  * Interrupt sources (Table 22)
  */
 
-#define K_BCM1480_INT_SOURCES               128
+#define K_BCM1480_INT_SOURCES		    128
 
 #define _BCM1480_INT_HIGH(k)   (k)
 #define _BCM1480_INT_LOW(k)    ((k)+64)
 
-#define K_BCM1480_INT_ADDR_TRAP             _BCM1480_INT_HIGH(1)
-#define K_BCM1480_INT_GPIO_0                _BCM1480_INT_HIGH(4)
-#define K_BCM1480_INT_GPIO_1                _BCM1480_INT_HIGH(5)
-#define K_BCM1480_INT_GPIO_2                _BCM1480_INT_HIGH(6)
-#define K_BCM1480_INT_GPIO_3                _BCM1480_INT_HIGH(7)
-#define K_BCM1480_INT_PCI_INTA              _BCM1480_INT_HIGH(8)
-#define K_BCM1480_INT_PCI_INTB              _BCM1480_INT_HIGH(9)
-#define K_BCM1480_INT_PCI_INTC              _BCM1480_INT_HIGH(10)
-#define K_BCM1480_INT_PCI_INTD              _BCM1480_INT_HIGH(11)
-#define K_BCM1480_INT_CYCLE_CP0             _BCM1480_INT_HIGH(12)
-#define K_BCM1480_INT_CYCLE_CP1             _BCM1480_INT_HIGH(13)
-#define K_BCM1480_INT_CYCLE_CP2             _BCM1480_INT_HIGH(14)
-#define K_BCM1480_INT_CYCLE_CP3             _BCM1480_INT_HIGH(15)
-#define K_BCM1480_INT_TIMER_0               _BCM1480_INT_HIGH(20)
-#define K_BCM1480_INT_TIMER_1               _BCM1480_INT_HIGH(21)
-#define K_BCM1480_INT_TIMER_2               _BCM1480_INT_HIGH(22)
-#define K_BCM1480_INT_TIMER_3               _BCM1480_INT_HIGH(23)
-#define K_BCM1480_INT_DM_CH_0               _BCM1480_INT_HIGH(28)
-#define K_BCM1480_INT_DM_CH_1               _BCM1480_INT_HIGH(29)
-#define K_BCM1480_INT_DM_CH_2               _BCM1480_INT_HIGH(30)
-#define K_BCM1480_INT_DM_CH_3               _BCM1480_INT_HIGH(31)
-#define K_BCM1480_INT_MAC_0                 _BCM1480_INT_HIGH(36)
-#define K_BCM1480_INT_MAC_0_CH1             _BCM1480_INT_HIGH(37)
-#define K_BCM1480_INT_MAC_1                 _BCM1480_INT_HIGH(38)
-#define K_BCM1480_INT_MAC_1_CH1             _BCM1480_INT_HIGH(39)
-#define K_BCM1480_INT_MAC_2                 _BCM1480_INT_HIGH(40)
-#define K_BCM1480_INT_MAC_2_CH1             _BCM1480_INT_HIGH(41)
-#define K_BCM1480_INT_MAC_3                 _BCM1480_INT_HIGH(42)
-#define K_BCM1480_INT_MAC_3_CH1             _BCM1480_INT_HIGH(43)
-#define K_BCM1480_INT_PMI_LOW               _BCM1480_INT_HIGH(52)
-#define K_BCM1480_INT_PMI_HIGH              _BCM1480_INT_HIGH(53)
-#define K_BCM1480_INT_PMO_LOW               _BCM1480_INT_HIGH(54)
-#define K_BCM1480_INT_PMO_HIGH              _BCM1480_INT_HIGH(55)
-#define K_BCM1480_INT_MBOX_0_0              _BCM1480_INT_HIGH(56)
-#define K_BCM1480_INT_MBOX_0_1              _BCM1480_INT_HIGH(57)
-#define K_BCM1480_INT_MBOX_0_2              _BCM1480_INT_HIGH(58)
-#define K_BCM1480_INT_MBOX_0_3              _BCM1480_INT_HIGH(59)
-#define K_BCM1480_INT_MBOX_1_0              _BCM1480_INT_HIGH(60)
-#define K_BCM1480_INT_MBOX_1_1              _BCM1480_INT_HIGH(61)
-#define K_BCM1480_INT_MBOX_1_2              _BCM1480_INT_HIGH(62)
-#define K_BCM1480_INT_MBOX_1_3              _BCM1480_INT_HIGH(63)
+#define K_BCM1480_INT_ADDR_TRAP		    _BCM1480_INT_HIGH(1)
+#define K_BCM1480_INT_GPIO_0		    _BCM1480_INT_HIGH(4)
+#define K_BCM1480_INT_GPIO_1		    _BCM1480_INT_HIGH(5)
+#define K_BCM1480_INT_GPIO_2		    _BCM1480_INT_HIGH(6)
+#define K_BCM1480_INT_GPIO_3		    _BCM1480_INT_HIGH(7)
+#define K_BCM1480_INT_PCI_INTA		    _BCM1480_INT_HIGH(8)
+#define K_BCM1480_INT_PCI_INTB		    _BCM1480_INT_HIGH(9)
+#define K_BCM1480_INT_PCI_INTC		    _BCM1480_INT_HIGH(10)
+#define K_BCM1480_INT_PCI_INTD		    _BCM1480_INT_HIGH(11)
+#define K_BCM1480_INT_CYCLE_CP0		    _BCM1480_INT_HIGH(12)
+#define K_BCM1480_INT_CYCLE_CP1		    _BCM1480_INT_HIGH(13)
+#define K_BCM1480_INT_CYCLE_CP2		    _BCM1480_INT_HIGH(14)
+#define K_BCM1480_INT_CYCLE_CP3		    _BCM1480_INT_HIGH(15)
+#define K_BCM1480_INT_TIMER_0		    _BCM1480_INT_HIGH(20)
+#define K_BCM1480_INT_TIMER_1		    _BCM1480_INT_HIGH(21)
+#define K_BCM1480_INT_TIMER_2		    _BCM1480_INT_HIGH(22)
+#define K_BCM1480_INT_TIMER_3		    _BCM1480_INT_HIGH(23)
+#define K_BCM1480_INT_DM_CH_0		    _BCM1480_INT_HIGH(28)
+#define K_BCM1480_INT_DM_CH_1		    _BCM1480_INT_HIGH(29)
+#define K_BCM1480_INT_DM_CH_2		    _BCM1480_INT_HIGH(30)
+#define K_BCM1480_INT_DM_CH_3		    _BCM1480_INT_HIGH(31)
+#define K_BCM1480_INT_MAC_0		    _BCM1480_INT_HIGH(36)
+#define K_BCM1480_INT_MAC_0_CH1		    _BCM1480_INT_HIGH(37)
+#define K_BCM1480_INT_MAC_1		    _BCM1480_INT_HIGH(38)
+#define K_BCM1480_INT_MAC_1_CH1		    _BCM1480_INT_HIGH(39)
+#define K_BCM1480_INT_MAC_2		    _BCM1480_INT_HIGH(40)
+#define K_BCM1480_INT_MAC_2_CH1		    _BCM1480_INT_HIGH(41)
+#define K_BCM1480_INT_MAC_3		    _BCM1480_INT_HIGH(42)
+#define K_BCM1480_INT_MAC_3_CH1		    _BCM1480_INT_HIGH(43)
+#define K_BCM1480_INT_PMI_LOW		    _BCM1480_INT_HIGH(52)
+#define K_BCM1480_INT_PMI_HIGH		    _BCM1480_INT_HIGH(53)
+#define K_BCM1480_INT_PMO_LOW		    _BCM1480_INT_HIGH(54)
+#define K_BCM1480_INT_PMO_HIGH		    _BCM1480_INT_HIGH(55)
+#define K_BCM1480_INT_MBOX_0_0		    _BCM1480_INT_HIGH(56)
+#define K_BCM1480_INT_MBOX_0_1		    _BCM1480_INT_HIGH(57)
+#define K_BCM1480_INT_MBOX_0_2		    _BCM1480_INT_HIGH(58)
+#define K_BCM1480_INT_MBOX_0_3		    _BCM1480_INT_HIGH(59)
+#define K_BCM1480_INT_MBOX_1_0		    _BCM1480_INT_HIGH(60)
+#define K_BCM1480_INT_MBOX_1_1		    _BCM1480_INT_HIGH(61)
+#define K_BCM1480_INT_MBOX_1_2		    _BCM1480_INT_HIGH(62)
+#define K_BCM1480_INT_MBOX_1_3		    _BCM1480_INT_HIGH(63)
 
-#define K_BCM1480_INT_BAD_ECC               _BCM1480_INT_LOW(1)
-#define K_BCM1480_INT_COR_ECC               _BCM1480_INT_LOW(2)
-#define K_BCM1480_INT_IO_BUS                _BCM1480_INT_LOW(3)
-#define K_BCM1480_INT_PERF_CNT              _BCM1480_INT_LOW(4)
-#define K_BCM1480_INT_SW_PERF_CNT           _BCM1480_INT_LOW(5)
-#define K_BCM1480_INT_TRACE_FREEZE          _BCM1480_INT_LOW(6)
-#define K_BCM1480_INT_SW_TRACE_FREEZE       _BCM1480_INT_LOW(7)
-#define K_BCM1480_INT_WATCHDOG_TIMER_0      _BCM1480_INT_LOW(8)
-#define K_BCM1480_INT_WATCHDOG_TIMER_1      _BCM1480_INT_LOW(9)
-#define K_BCM1480_INT_WATCHDOG_TIMER_2      _BCM1480_INT_LOW(10)
-#define K_BCM1480_INT_WATCHDOG_TIMER_3      _BCM1480_INT_LOW(11)
-#define K_BCM1480_INT_PCI_ERROR             _BCM1480_INT_LOW(16)
-#define K_BCM1480_INT_PCI_RESET             _BCM1480_INT_LOW(17)
-#define K_BCM1480_INT_NODE_CONTROLLER       _BCM1480_INT_LOW(18)
-#define K_BCM1480_INT_HOST_BRIDGE           _BCM1480_INT_LOW(19)
-#define K_BCM1480_INT_PORT_0_FATAL          _BCM1480_INT_LOW(20)
-#define K_BCM1480_INT_PORT_0_NONFATAL       _BCM1480_INT_LOW(21)
-#define K_BCM1480_INT_PORT_1_FATAL          _BCM1480_INT_LOW(22)
-#define K_BCM1480_INT_PORT_1_NONFATAL       _BCM1480_INT_LOW(23)
-#define K_BCM1480_INT_PORT_2_FATAL          _BCM1480_INT_LOW(24)
-#define K_BCM1480_INT_PORT_2_NONFATAL       _BCM1480_INT_LOW(25)
-#define K_BCM1480_INT_LDT_SMI               _BCM1480_INT_LOW(32)
-#define K_BCM1480_INT_LDT_NMI               _BCM1480_INT_LOW(33)
-#define K_BCM1480_INT_LDT_INIT              _BCM1480_INT_LOW(34)
-#define K_BCM1480_INT_LDT_STARTUP           _BCM1480_INT_LOW(35)
-#define K_BCM1480_INT_LDT_EXT               _BCM1480_INT_LOW(36)
-#define K_BCM1480_INT_SMB_0                 _BCM1480_INT_LOW(40)
-#define K_BCM1480_INT_SMB_1                 _BCM1480_INT_LOW(41)
-#define K_BCM1480_INT_PCMCIA                _BCM1480_INT_LOW(42)
-#define K_BCM1480_INT_UART_0                _BCM1480_INT_LOW(44)
-#define K_BCM1480_INT_UART_1                _BCM1480_INT_LOW(45)
-#define K_BCM1480_INT_UART_2                _BCM1480_INT_LOW(46)
-#define K_BCM1480_INT_UART_3                _BCM1480_INT_LOW(47)
-#define K_BCM1480_INT_GPIO_4                _BCM1480_INT_LOW(52)
-#define K_BCM1480_INT_GPIO_5                _BCM1480_INT_LOW(53)
-#define K_BCM1480_INT_GPIO_6                _BCM1480_INT_LOW(54)
-#define K_BCM1480_INT_GPIO_7                _BCM1480_INT_LOW(55)
-#define K_BCM1480_INT_GPIO_8                _BCM1480_INT_LOW(56)
-#define K_BCM1480_INT_GPIO_9                _BCM1480_INT_LOW(57)
-#define K_BCM1480_INT_GPIO_10               _BCM1480_INT_LOW(58)
-#define K_BCM1480_INT_GPIO_11               _BCM1480_INT_LOW(59)
-#define K_BCM1480_INT_GPIO_12               _BCM1480_INT_LOW(60)
-#define K_BCM1480_INT_GPIO_13               _BCM1480_INT_LOW(61)
-#define K_BCM1480_INT_GPIO_14               _BCM1480_INT_LOW(62)
-#define K_BCM1480_INT_GPIO_15               _BCM1480_INT_LOW(63)
+#define K_BCM1480_INT_BAD_ECC		    _BCM1480_INT_LOW(1)
+#define K_BCM1480_INT_COR_ECC		    _BCM1480_INT_LOW(2)
+#define K_BCM1480_INT_IO_BUS		    _BCM1480_INT_LOW(3)
+#define K_BCM1480_INT_PERF_CNT		    _BCM1480_INT_LOW(4)
+#define K_BCM1480_INT_SW_PERF_CNT	    _BCM1480_INT_LOW(5)
+#define K_BCM1480_INT_TRACE_FREEZE	    _BCM1480_INT_LOW(6)
+#define K_BCM1480_INT_SW_TRACE_FREEZE	    _BCM1480_INT_LOW(7)
+#define K_BCM1480_INT_WATCHDOG_TIMER_0	    _BCM1480_INT_LOW(8)
+#define K_BCM1480_INT_WATCHDOG_TIMER_1	    _BCM1480_INT_LOW(9)
+#define K_BCM1480_INT_WATCHDOG_TIMER_2	    _BCM1480_INT_LOW(10)
+#define K_BCM1480_INT_WATCHDOG_TIMER_3	    _BCM1480_INT_LOW(11)
+#define K_BCM1480_INT_PCI_ERROR		    _BCM1480_INT_LOW(16)
+#define K_BCM1480_INT_PCI_RESET		    _BCM1480_INT_LOW(17)
+#define K_BCM1480_INT_NODE_CONTROLLER	    _BCM1480_INT_LOW(18)
+#define K_BCM1480_INT_HOST_BRIDGE	    _BCM1480_INT_LOW(19)
+#define K_BCM1480_INT_PORT_0_FATAL	    _BCM1480_INT_LOW(20)
+#define K_BCM1480_INT_PORT_0_NONFATAL	    _BCM1480_INT_LOW(21)
+#define K_BCM1480_INT_PORT_1_FATAL	    _BCM1480_INT_LOW(22)
+#define K_BCM1480_INT_PORT_1_NONFATAL	    _BCM1480_INT_LOW(23)
+#define K_BCM1480_INT_PORT_2_FATAL	    _BCM1480_INT_LOW(24)
+#define K_BCM1480_INT_PORT_2_NONFATAL	    _BCM1480_INT_LOW(25)
+#define K_BCM1480_INT_LDT_SMI		    _BCM1480_INT_LOW(32)
+#define K_BCM1480_INT_LDT_NMI		    _BCM1480_INT_LOW(33)
+#define K_BCM1480_INT_LDT_INIT		    _BCM1480_INT_LOW(34)
+#define K_BCM1480_INT_LDT_STARTUP	    _BCM1480_INT_LOW(35)
+#define K_BCM1480_INT_LDT_EXT		    _BCM1480_INT_LOW(36)
+#define K_BCM1480_INT_SMB_0		    _BCM1480_INT_LOW(40)
+#define K_BCM1480_INT_SMB_1		    _BCM1480_INT_LOW(41)
+#define K_BCM1480_INT_PCMCIA		    _BCM1480_INT_LOW(42)
+#define K_BCM1480_INT_UART_0		    _BCM1480_INT_LOW(44)
+#define K_BCM1480_INT_UART_1		    _BCM1480_INT_LOW(45)
+#define K_BCM1480_INT_UART_2		    _BCM1480_INT_LOW(46)
+#define K_BCM1480_INT_UART_3		    _BCM1480_INT_LOW(47)
+#define K_BCM1480_INT_GPIO_4		    _BCM1480_INT_LOW(52)
+#define K_BCM1480_INT_GPIO_5		    _BCM1480_INT_LOW(53)
+#define K_BCM1480_INT_GPIO_6		    _BCM1480_INT_LOW(54)
+#define K_BCM1480_INT_GPIO_7		    _BCM1480_INT_LOW(55)
+#define K_BCM1480_INT_GPIO_8		    _BCM1480_INT_LOW(56)
+#define K_BCM1480_INT_GPIO_9		    _BCM1480_INT_LOW(57)
+#define K_BCM1480_INT_GPIO_10		    _BCM1480_INT_LOW(58)
+#define K_BCM1480_INT_GPIO_11		    _BCM1480_INT_LOW(59)
+#define K_BCM1480_INT_GPIO_12		    _BCM1480_INT_LOW(60)
+#define K_BCM1480_INT_GPIO_13		    _BCM1480_INT_LOW(61)
+#define K_BCM1480_INT_GPIO_14		    _BCM1480_INT_LOW(62)
+#define K_BCM1480_INT_GPIO_15		    _BCM1480_INT_LOW(63)
 
 /*
  * Mask values for each interrupt
  */
 
-#define _BCM1480_INT_MASK(w, n)              _SB_MAKEMASK(w, ((n) & 0x3F))
-#define _BCM1480_INT_MASK1(n)               _SB_MAKEMASK1(((n) & 0x3F))
-#define _BCM1480_INT_OFFSET(n)              (((n) & 0x40) << 6)
+#define _BCM1480_INT_MASK(w, n)		     _SB_MAKEMASK(w, ((n) & 0x3F))
+#define _BCM1480_INT_MASK1(n)		    _SB_MAKEMASK1(((n) & 0x3F))
+#define _BCM1480_INT_OFFSET(n)		    (((n) & 0x40) << 6)
 
-#define M_BCM1480_INT_CASCADE               _BCM1480_INT_MASK1(_BCM1480_INT_HIGH(0))
+#define M_BCM1480_INT_CASCADE		    _BCM1480_INT_MASK1(_BCM1480_INT_HIGH(0))
 
-#define M_BCM1480_INT_ADDR_TRAP             _BCM1480_INT_MASK1(K_BCM1480_INT_ADDR_TRAP)
-#define M_BCM1480_INT_GPIO_0                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_0)
-#define M_BCM1480_INT_GPIO_1                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_1)
-#define M_BCM1480_INT_GPIO_2                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_2)
-#define M_BCM1480_INT_GPIO_3                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_3)
-#define M_BCM1480_INT_PCI_INTA              _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTA)
-#define M_BCM1480_INT_PCI_INTB              _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTB)
-#define M_BCM1480_INT_PCI_INTC              _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTC)
-#define M_BCM1480_INT_PCI_INTD              _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTD)
-#define M_BCM1480_INT_CYCLE_CP0             _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP0)
-#define M_BCM1480_INT_CYCLE_CP1             _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP1)
-#define M_BCM1480_INT_CYCLE_CP2             _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP2)
-#define M_BCM1480_INT_CYCLE_CP3             _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP3)
-#define M_BCM1480_INT_TIMER_0               _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_0)
-#define M_BCM1480_INT_TIMER_1               _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_1)
-#define M_BCM1480_INT_TIMER_2               _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_2)
-#define M_BCM1480_INT_TIMER_3               _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_3)
-#define M_BCM1480_INT_DM_CH_0               _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_0)
-#define M_BCM1480_INT_DM_CH_1               _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_1)
-#define M_BCM1480_INT_DM_CH_2               _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_2)
-#define M_BCM1480_INT_DM_CH_3               _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_3)
-#define M_BCM1480_INT_MAC_0                 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0)
-#define M_BCM1480_INT_MAC_0_CH1             _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0_CH1)
-#define M_BCM1480_INT_MAC_1                 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1)
-#define M_BCM1480_INT_MAC_1_CH1             _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1_CH1)
-#define M_BCM1480_INT_MAC_2                 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2)
-#define M_BCM1480_INT_MAC_2_CH1             _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2_CH1)
-#define M_BCM1480_INT_MAC_3                 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3)
-#define M_BCM1480_INT_MAC_3_CH1             _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3_CH1)
-#define M_BCM1480_INT_PMI_LOW               _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_LOW)
-#define M_BCM1480_INT_PMI_HIGH              _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH)
-#define M_BCM1480_INT_PMO_LOW               _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW)
-#define M_BCM1480_INT_PMO_HIGH              _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH)
-#define M_BCM1480_INT_MBOX_ALL              _BCM1480_INT_MASK(8, K_BCM1480_INT_MBOX_0_0)
-#define M_BCM1480_INT_MBOX_0_0              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0)
-#define M_BCM1480_INT_MBOX_0_1              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1)
-#define M_BCM1480_INT_MBOX_0_2              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2)
-#define M_BCM1480_INT_MBOX_0_3              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_3)
-#define M_BCM1480_INT_MBOX_1_0              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_0)
-#define M_BCM1480_INT_MBOX_1_1              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_1)
-#define M_BCM1480_INT_MBOX_1_2              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_2)
-#define M_BCM1480_INT_MBOX_1_3              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_3)
-#define M_BCM1480_INT_BAD_ECC               _BCM1480_INT_MASK1(K_BCM1480_INT_BAD_ECC)
-#define M_BCM1480_INT_COR_ECC               _BCM1480_INT_MASK1(K_BCM1480_INT_COR_ECC)
-#define M_BCM1480_INT_IO_BUS                _BCM1480_INT_MASK1(K_BCM1480_INT_IO_BUS)
-#define M_BCM1480_INT_PERF_CNT              _BCM1480_INT_MASK1(K_BCM1480_INT_PERF_CNT)
-#define M_BCM1480_INT_SW_PERF_CNT           _BCM1480_INT_MASK1(K_BCM1480_INT_SW_PERF_CNT)
-#define M_BCM1480_INT_TRACE_FREEZE          _BCM1480_INT_MASK1(K_BCM1480_INT_TRACE_FREEZE)
-#define M_BCM1480_INT_SW_TRACE_FREEZE       _BCM1480_INT_MASK1(K_BCM1480_INT_SW_TRACE_FREEZE)
-#define M_BCM1480_INT_WATCHDOG_TIMER_0      _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_0)
-#define M_BCM1480_INT_WATCHDOG_TIMER_1      _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_1)
-#define M_BCM1480_INT_WATCHDOG_TIMER_2      _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_2)
-#define M_BCM1480_INT_WATCHDOG_TIMER_3      _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_3)
-#define M_BCM1480_INT_PCI_ERROR             _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_ERROR)
-#define M_BCM1480_INT_PCI_RESET             _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_RESET)
-#define M_BCM1480_INT_NODE_CONTROLLER       _BCM1480_INT_MASK1(K_BCM1480_INT_NODE_CONTROLLER)
-#define M_BCM1480_INT_HOST_BRIDGE           _BCM1480_INT_MASK1(K_BCM1480_INT_HOST_BRIDGE)
-#define M_BCM1480_INT_PORT_0_FATAL          _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_FATAL)
-#define M_BCM1480_INT_PORT_0_NONFATAL       _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_NONFATAL)
-#define M_BCM1480_INT_PORT_1_FATAL          _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_FATAL)
-#define M_BCM1480_INT_PORT_1_NONFATAL       _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_NONFATAL)
-#define M_BCM1480_INT_PORT_2_FATAL          _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_FATAL)
-#define M_BCM1480_INT_PORT_2_NONFATAL       _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_NONFATAL)
-#define M_BCM1480_INT_LDT_SMI               _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_SMI)
-#define M_BCM1480_INT_LDT_NMI               _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_NMI)
-#define M_BCM1480_INT_LDT_INIT              _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_INIT)
-#define M_BCM1480_INT_LDT_STARTUP           _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_STARTUP)
-#define M_BCM1480_INT_LDT_EXT               _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_EXT)
-#define M_BCM1480_INT_SMB_0                 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_0)
-#define M_BCM1480_INT_SMB_1                 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_1)
-#define M_BCM1480_INT_PCMCIA                _BCM1480_INT_MASK1(K_BCM1480_INT_PCMCIA)
-#define M_BCM1480_INT_UART_0                _BCM1480_INT_MASK1(K_BCM1480_INT_UART_0)
-#define M_BCM1480_INT_UART_1                _BCM1480_INT_MASK1(K_BCM1480_INT_UART_1)
-#define M_BCM1480_INT_UART_2                _BCM1480_INT_MASK1(K_BCM1480_INT_UART_2)
-#define M_BCM1480_INT_UART_3                _BCM1480_INT_MASK1(K_BCM1480_INT_UART_3)
-#define M_BCM1480_INT_GPIO_4                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_4)
-#define M_BCM1480_INT_GPIO_5                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_5)
-#define M_BCM1480_INT_GPIO_6                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_6)
-#define M_BCM1480_INT_GPIO_7                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_7)
-#define M_BCM1480_INT_GPIO_8                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_8)
-#define M_BCM1480_INT_GPIO_9                _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_9)
-#define M_BCM1480_INT_GPIO_10               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_10)
-#define M_BCM1480_INT_GPIO_11               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_11)
-#define M_BCM1480_INT_GPIO_12               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_12)
-#define M_BCM1480_INT_GPIO_13               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_13)
-#define M_BCM1480_INT_GPIO_14               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_14)
-#define M_BCM1480_INT_GPIO_15               _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_15)
+#define M_BCM1480_INT_ADDR_TRAP		    _BCM1480_INT_MASK1(K_BCM1480_INT_ADDR_TRAP)
+#define M_BCM1480_INT_GPIO_0		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_0)
+#define M_BCM1480_INT_GPIO_1		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_1)
+#define M_BCM1480_INT_GPIO_2		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_2)
+#define M_BCM1480_INT_GPIO_3		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_3)
+#define M_BCM1480_INT_PCI_INTA		    _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTA)
+#define M_BCM1480_INT_PCI_INTB		    _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTB)
+#define M_BCM1480_INT_PCI_INTC		    _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTC)
+#define M_BCM1480_INT_PCI_INTD		    _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTD)
+#define M_BCM1480_INT_CYCLE_CP0		    _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP0)
+#define M_BCM1480_INT_CYCLE_CP1		    _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP1)
+#define M_BCM1480_INT_CYCLE_CP2		    _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP2)
+#define M_BCM1480_INT_CYCLE_CP3		    _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP3)
+#define M_BCM1480_INT_TIMER_0		    _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_0)
+#define M_BCM1480_INT_TIMER_1		    _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_1)
+#define M_BCM1480_INT_TIMER_2		    _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_2)
+#define M_BCM1480_INT_TIMER_3		    _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_3)
+#define M_BCM1480_INT_DM_CH_0		    _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_0)
+#define M_BCM1480_INT_DM_CH_1		    _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_1)
+#define M_BCM1480_INT_DM_CH_2		    _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_2)
+#define M_BCM1480_INT_DM_CH_3		    _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_3)
+#define M_BCM1480_INT_MAC_0		    _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0)
+#define M_BCM1480_INT_MAC_0_CH1		    _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0_CH1)
+#define M_BCM1480_INT_MAC_1		    _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1)
+#define M_BCM1480_INT_MAC_1_CH1		    _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1_CH1)
+#define M_BCM1480_INT_MAC_2		    _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2)
+#define M_BCM1480_INT_MAC_2_CH1		    _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2_CH1)
+#define M_BCM1480_INT_MAC_3		    _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3)
+#define M_BCM1480_INT_MAC_3_CH1		    _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3_CH1)
+#define M_BCM1480_INT_PMI_LOW		    _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_LOW)
+#define M_BCM1480_INT_PMI_HIGH		    _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH)
+#define M_BCM1480_INT_PMO_LOW		    _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW)
+#define M_BCM1480_INT_PMO_HIGH		    _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH)
+#define M_BCM1480_INT_MBOX_ALL		    _BCM1480_INT_MASK(8, K_BCM1480_INT_MBOX_0_0)
+#define M_BCM1480_INT_MBOX_0_0		    _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0)
+#define M_BCM1480_INT_MBOX_0_1		    _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1)
+#define M_BCM1480_INT_MBOX_0_2		    _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2)
+#define M_BCM1480_INT_MBOX_0_3		    _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_3)
+#define M_BCM1480_INT_MBOX_1_0		    _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_0)
+#define M_BCM1480_INT_MBOX_1_1		    _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_1)
+#define M_BCM1480_INT_MBOX_1_2		    _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_2)
+#define M_BCM1480_INT_MBOX_1_3		    _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_3)
+#define M_BCM1480_INT_BAD_ECC		    _BCM1480_INT_MASK1(K_BCM1480_INT_BAD_ECC)
+#define M_BCM1480_INT_COR_ECC		    _BCM1480_INT_MASK1(K_BCM1480_INT_COR_ECC)
+#define M_BCM1480_INT_IO_BUS		    _BCM1480_INT_MASK1(K_BCM1480_INT_IO_BUS)
+#define M_BCM1480_INT_PERF_CNT		    _BCM1480_INT_MASK1(K_BCM1480_INT_PERF_CNT)
+#define M_BCM1480_INT_SW_PERF_CNT	    _BCM1480_INT_MASK1(K_BCM1480_INT_SW_PERF_CNT)
+#define M_BCM1480_INT_TRACE_FREEZE	    _BCM1480_INT_MASK1(K_BCM1480_INT_TRACE_FREEZE)
+#define M_BCM1480_INT_SW_TRACE_FREEZE	    _BCM1480_INT_MASK1(K_BCM1480_INT_SW_TRACE_FREEZE)
+#define M_BCM1480_INT_WATCHDOG_TIMER_0	    _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_0)
+#define M_BCM1480_INT_WATCHDOG_TIMER_1	    _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_1)
+#define M_BCM1480_INT_WATCHDOG_TIMER_2	    _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_2)
+#define M_BCM1480_INT_WATCHDOG_TIMER_3	    _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_3)
+#define M_BCM1480_INT_PCI_ERROR		    _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_ERROR)
+#define M_BCM1480_INT_PCI_RESET		    _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_RESET)
+#define M_BCM1480_INT_NODE_CONTROLLER	    _BCM1480_INT_MASK1(K_BCM1480_INT_NODE_CONTROLLER)
+#define M_BCM1480_INT_HOST_BRIDGE	    _BCM1480_INT_MASK1(K_BCM1480_INT_HOST_BRIDGE)
+#define M_BCM1480_INT_PORT_0_FATAL	    _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_FATAL)
+#define M_BCM1480_INT_PORT_0_NONFATAL	    _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_NONFATAL)
+#define M_BCM1480_INT_PORT_1_FATAL	    _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_FATAL)
+#define M_BCM1480_INT_PORT_1_NONFATAL	    _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_NONFATAL)
+#define M_BCM1480_INT_PORT_2_FATAL	    _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_FATAL)
+#define M_BCM1480_INT_PORT_2_NONFATAL	    _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_NONFATAL)
+#define M_BCM1480_INT_LDT_SMI		    _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_SMI)
+#define M_BCM1480_INT_LDT_NMI		    _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_NMI)
+#define M_BCM1480_INT_LDT_INIT		    _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_INIT)
+#define M_BCM1480_INT_LDT_STARTUP	    _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_STARTUP)
+#define M_BCM1480_INT_LDT_EXT		    _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_EXT)
+#define M_BCM1480_INT_SMB_0		    _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_0)
+#define M_BCM1480_INT_SMB_1		    _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_1)
+#define M_BCM1480_INT_PCMCIA		    _BCM1480_INT_MASK1(K_BCM1480_INT_PCMCIA)
+#define M_BCM1480_INT_UART_0		    _BCM1480_INT_MASK1(K_BCM1480_INT_UART_0)
+#define M_BCM1480_INT_UART_1		    _BCM1480_INT_MASK1(K_BCM1480_INT_UART_1)
+#define M_BCM1480_INT_UART_2		    _BCM1480_INT_MASK1(K_BCM1480_INT_UART_2)
+#define M_BCM1480_INT_UART_3		    _BCM1480_INT_MASK1(K_BCM1480_INT_UART_3)
+#define M_BCM1480_INT_GPIO_4		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_4)
+#define M_BCM1480_INT_GPIO_5		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_5)
+#define M_BCM1480_INT_GPIO_6		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_6)
+#define M_BCM1480_INT_GPIO_7		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_7)
+#define M_BCM1480_INT_GPIO_8		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_8)
+#define M_BCM1480_INT_GPIO_9		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_9)
+#define M_BCM1480_INT_GPIO_10		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_10)
+#define M_BCM1480_INT_GPIO_11		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_11)
+#define M_BCM1480_INT_GPIO_12		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_12)
+#define M_BCM1480_INT_GPIO_13		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_13)
+#define M_BCM1480_INT_GPIO_14		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_14)
+#define M_BCM1480_INT_GPIO_15		    _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_15)
 
 /*
  * Interrupt mappings (Table 18)
  */
 
-#define K_BCM1480_INT_MAP_I0    0		/* interrupt pins on processor */
-#define K_BCM1480_INT_MAP_I1    1
-#define K_BCM1480_INT_MAP_I2    2
-#define K_BCM1480_INT_MAP_I3    3
-#define K_BCM1480_INT_MAP_I4    4
-#define K_BCM1480_INT_MAP_I5    5
-#define K_BCM1480_INT_MAP_NMI   6		/* nonmaskable */
-#define K_BCM1480_INT_MAP_DINT  7		/* debug interrupt */
+#define K_BCM1480_INT_MAP_I0	0		/* interrupt pins on processor */
+#define K_BCM1480_INT_MAP_I1	1
+#define K_BCM1480_INT_MAP_I2	2
+#define K_BCM1480_INT_MAP_I3	3
+#define K_BCM1480_INT_MAP_I4	4
+#define K_BCM1480_INT_MAP_I5	5
+#define K_BCM1480_INT_MAP_NMI	6		/* nonmaskable */
+#define K_BCM1480_INT_MAP_DINT	7		/* debug interrupt */
 
 /*
  * Interrupt LDT Set Register (Table 19)
  */
 
-#define S_BCM1480_INT_HT_INTMSG             0
-#define M_BCM1480_INT_HT_INTMSG             _SB_MAKEMASK(3, S_BCM1480_INT_HT_INTMSG)
-#define V_BCM1480_INT_HT_INTMSG(x)          _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTMSG)
-#define G_BCM1480_INT_HT_INTMSG(x)          _SB_GETVALUE(x, S_BCM1480_INT_HT_INTMSG, M_BCM1480_INT_HT_INTMSG)
+#define S_BCM1480_INT_HT_INTMSG		    0
+#define M_BCM1480_INT_HT_INTMSG		    _SB_MAKEMASK(3, S_BCM1480_INT_HT_INTMSG)
+#define V_BCM1480_INT_HT_INTMSG(x)	    _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTMSG)
+#define G_BCM1480_INT_HT_INTMSG(x)	    _SB_GETVALUE(x, S_BCM1480_INT_HT_INTMSG, M_BCM1480_INT_HT_INTMSG)
 
-#define K_BCM1480_INT_HT_INTMSG_FIXED       0
+#define K_BCM1480_INT_HT_INTMSG_FIXED	    0
 #define K_BCM1480_INT_HT_INTMSG_ARBITRATED  1
-#define K_BCM1480_INT_HT_INTMSG_SMI         2
-#define K_BCM1480_INT_HT_INTMSG_NMI         3
-#define K_BCM1480_INT_HT_INTMSG_INIT        4
-#define K_BCM1480_INT_HT_INTMSG_STARTUP     5
-#define K_BCM1480_INT_HT_INTMSG_EXTINT      6
+#define K_BCM1480_INT_HT_INTMSG_SMI	    2
+#define K_BCM1480_INT_HT_INTMSG_NMI	    3
+#define K_BCM1480_INT_HT_INTMSG_INIT	    4
+#define K_BCM1480_INT_HT_INTMSG_STARTUP	    5
+#define K_BCM1480_INT_HT_INTMSG_EXTINT	    6
 #define K_BCM1480_INT_HT_INTMSG_RESERVED    7
 
-#define M_BCM1480_INT_HT_TRIGGERMODE        _SB_MAKEMASK1(3)
-#define V_BCM1480_INT_HT_EDGETRIGGER        0
-#define V_BCM1480_INT_HT_LEVELTRIGGER       M_BCM1480_INT_HT_TRIGGERMODE
+#define M_BCM1480_INT_HT_TRIGGERMODE	    _SB_MAKEMASK1(3)
+#define V_BCM1480_INT_HT_EDGETRIGGER	    0
+#define V_BCM1480_INT_HT_LEVELTRIGGER	    M_BCM1480_INT_HT_TRIGGERMODE
 
-#define M_BCM1480_INT_HT_DESTMODE           _SB_MAKEMASK1(4)
-#define V_BCM1480_INT_HT_PHYSICALDEST       0
-#define V_BCM1480_INT_HT_LOGICALDEST        M_BCM1480_INT_HT_DESTMODE
+#define M_BCM1480_INT_HT_DESTMODE	    _SB_MAKEMASK1(4)
+#define V_BCM1480_INT_HT_PHYSICALDEST	    0
+#define V_BCM1480_INT_HT_LOGICALDEST	    M_BCM1480_INT_HT_DESTMODE
 
-#define S_BCM1480_INT_HT_INTDEST            5
-#define M_BCM1480_INT_HT_INTDEST            _SB_MAKEMASK(8, S_BCM1480_INT_HT_INTDEST)
-#define V_BCM1480_INT_HT_INTDEST(x)         _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTDEST)
-#define G_BCM1480_INT_HT_INTDEST(x)         _SB_GETVALUE(x, S_BCM1480_INT_HT_INTDEST, M_BCM1480_INT_HT_INTDEST)
+#define S_BCM1480_INT_HT_INTDEST	    5
+#define M_BCM1480_INT_HT_INTDEST	    _SB_MAKEMASK(8, S_BCM1480_INT_HT_INTDEST)
+#define V_BCM1480_INT_HT_INTDEST(x)	    _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTDEST)
+#define G_BCM1480_INT_HT_INTDEST(x)	    _SB_GETVALUE(x, S_BCM1480_INT_HT_INTDEST, M_BCM1480_INT_HT_INTDEST)
 
-#define S_BCM1480_INT_HT_VECTOR             13
-#define M_BCM1480_INT_HT_VECTOR             _SB_MAKEMASK(8, S_BCM1480_INT_HT_VECTOR)
-#define V_BCM1480_INT_HT_VECTOR(x)          _SB_MAKEVALUE(x, S_BCM1480_INT_HT_VECTOR)
-#define G_BCM1480_INT_HT_VECTOR(x)          _SB_GETVALUE(x, S_BCM1480_INT_HT_VECTOR, M_BCM1480_INT_HT_VECTOR)
+#define S_BCM1480_INT_HT_VECTOR		    13
+#define M_BCM1480_INT_HT_VECTOR		    _SB_MAKEMASK(8, S_BCM1480_INT_HT_VECTOR)
+#define V_BCM1480_INT_HT_VECTOR(x)	    _SB_MAKEVALUE(x, S_BCM1480_INT_HT_VECTOR)
+#define G_BCM1480_INT_HT_VECTOR(x)	    _SB_GETVALUE(x, S_BCM1480_INT_HT_VECTOR, M_BCM1480_INT_HT_VECTOR)
 
 /*
  * Vector prefix (Table 4-7)
  */
 
 #define M_BCM1480_HTVECT_RAISE_INTLDT_HIGH  0x00
-#define M_BCM1480_HTVECT_RAISE_MBOX_0       0x40
+#define M_BCM1480_HTVECT_RAISE_MBOX_0	    0x40
 #define M_BCM1480_HTVECT_RAISE_INTLDT_LO    0x80
-#define M_BCM1480_HTVECT_RAISE_MBOX_1       0xC0
+#define M_BCM1480_HTVECT_RAISE_MBOX_1	    0xC0
 
 #endif /* _BCM1480_INT_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_l2c.h b/arch/mips/include/asm/sibyte/bcm1480_l2c.h
index 725d38c..910e5c7 100644
--- a/arch/mips/include/asm/sibyte/bcm1480_l2c.h
+++ b/arch/mips/include/asm/sibyte/bcm1480_l2c.h
@@ -39,120 +39,120 @@
  * Format of level 2 cache management address (Table 55)
  */
 
-#define S_BCM1480_L2C_MGMT_INDEX            5
-#define M_BCM1480_L2C_MGMT_INDEX            _SB_MAKEMASK(12, S_BCM1480_L2C_MGMT_INDEX)
-#define V_BCM1480_L2C_MGMT_INDEX(x)         _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_INDEX)
-#define G_BCM1480_L2C_MGMT_INDEX(x)         _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_INDEX, M_BCM1480_L2C_MGMT_INDEX)
+#define S_BCM1480_L2C_MGMT_INDEX	    5
+#define M_BCM1480_L2C_MGMT_INDEX	    _SB_MAKEMASK(12, S_BCM1480_L2C_MGMT_INDEX)
+#define V_BCM1480_L2C_MGMT_INDEX(x)	    _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_INDEX)
+#define G_BCM1480_L2C_MGMT_INDEX(x)	    _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_INDEX, M_BCM1480_L2C_MGMT_INDEX)
 
-#define S_BCM1480_L2C_MGMT_WAY              17
-#define M_BCM1480_L2C_MGMT_WAY              _SB_MAKEMASK(3, S_BCM1480_L2C_MGMT_WAY)
-#define V_BCM1480_L2C_MGMT_WAY(x)           _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_WAY)
-#define G_BCM1480_L2C_MGMT_WAY(x)           _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_WAY, M_BCM1480_L2C_MGMT_WAY)
+#define S_BCM1480_L2C_MGMT_WAY		    17
+#define M_BCM1480_L2C_MGMT_WAY		    _SB_MAKEMASK(3, S_BCM1480_L2C_MGMT_WAY)
+#define V_BCM1480_L2C_MGMT_WAY(x)	    _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_WAY)
+#define G_BCM1480_L2C_MGMT_WAY(x)	    _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_WAY, M_BCM1480_L2C_MGMT_WAY)
 
-#define M_BCM1480_L2C_MGMT_DIRTY            _SB_MAKEMASK1(20)
-#define M_BCM1480_L2C_MGMT_VALID            _SB_MAKEMASK1(21)
+#define M_BCM1480_L2C_MGMT_DIRTY	    _SB_MAKEMASK1(20)
+#define M_BCM1480_L2C_MGMT_VALID	    _SB_MAKEMASK1(21)
 
-#define S_BCM1480_L2C_MGMT_ECC_DIAG         22
-#define M_BCM1480_L2C_MGMT_ECC_DIAG         _SB_MAKEMASK(2, S_BCM1480_L2C_MGMT_ECC_DIAG)
-#define V_BCM1480_L2C_MGMT_ECC_DIAG(x)      _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG)
-#define G_BCM1480_L2C_MGMT_ECC_DIAG(x)      _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG, M_BCM1480_L2C_MGMT_ECC_DIAG)
+#define S_BCM1480_L2C_MGMT_ECC_DIAG	    22
+#define M_BCM1480_L2C_MGMT_ECC_DIAG	    _SB_MAKEMASK(2, S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define V_BCM1480_L2C_MGMT_ECC_DIAG(x)	    _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define G_BCM1480_L2C_MGMT_ECC_DIAG(x)	    _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG, M_BCM1480_L2C_MGMT_ECC_DIAG)
 
-#define A_BCM1480_L2C_MGMT_TAG_BASE         0x00D0000000
+#define A_BCM1480_L2C_MGMT_TAG_BASE	    0x00D0000000
 
-#define BCM1480_L2C_ENTRIES_PER_WAY         4096
-#define BCM1480_L2C_NUM_WAYS                8
+#define BCM1480_L2C_ENTRIES_PER_WAY	    4096
+#define BCM1480_L2C_NUM_WAYS		    8
 
 
 /*
  * Level 2 Cache Tag register (Table 59)
  */
 
-#define S_BCM1480_L2C_TAG_MBZ               0
-#define M_BCM1480_L2C_TAG_MBZ               _SB_MAKEMASK(5, S_BCM1480_L2C_TAG_MBZ)
+#define S_BCM1480_L2C_TAG_MBZ		    0
+#define M_BCM1480_L2C_TAG_MBZ		    _SB_MAKEMASK(5, S_BCM1480_L2C_TAG_MBZ)
 
-#define S_BCM1480_L2C_TAG_INDEX             5
-#define M_BCM1480_L2C_TAG_INDEX             _SB_MAKEMASK(12, S_BCM1480_L2C_TAG_INDEX)
-#define V_BCM1480_L2C_TAG_INDEX(x)          _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_INDEX)
-#define G_BCM1480_L2C_TAG_INDEX(x)          _SB_GETVALUE(x, S_BCM1480_L2C_TAG_INDEX, M_BCM1480_L2C_TAG_INDEX)
+#define S_BCM1480_L2C_TAG_INDEX		    5
+#define M_BCM1480_L2C_TAG_INDEX		    _SB_MAKEMASK(12, S_BCM1480_L2C_TAG_INDEX)
+#define V_BCM1480_L2C_TAG_INDEX(x)	    _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_INDEX)
+#define G_BCM1480_L2C_TAG_INDEX(x)	    _SB_GETVALUE(x, S_BCM1480_L2C_TAG_INDEX, M_BCM1480_L2C_TAG_INDEX)
 
 /* Note that index bit 16 is also tag bit 40 */
-#define S_BCM1480_L2C_TAG_TAG               17
-#define M_BCM1480_L2C_TAG_TAG               _SB_MAKEMASK(23, S_BCM1480_L2C_TAG_TAG)
-#define V_BCM1480_L2C_TAG_TAG(x)            _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_TAG)
-#define G_BCM1480_L2C_TAG_TAG(x)            _SB_GETVALUE(x, S_BCM1480_L2C_TAG_TAG, M_BCM1480_L2C_TAG_TAG)
+#define S_BCM1480_L2C_TAG_TAG		    17
+#define M_BCM1480_L2C_TAG_TAG		    _SB_MAKEMASK(23, S_BCM1480_L2C_TAG_TAG)
+#define V_BCM1480_L2C_TAG_TAG(x)	    _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_TAG)
+#define G_BCM1480_L2C_TAG_TAG(x)	    _SB_GETVALUE(x, S_BCM1480_L2C_TAG_TAG, M_BCM1480_L2C_TAG_TAG)
 
-#define S_BCM1480_L2C_TAG_ECC               40
-#define M_BCM1480_L2C_TAG_ECC               _SB_MAKEMASK(6, S_BCM1480_L2C_TAG_ECC)
-#define V_BCM1480_L2C_TAG_ECC(x)            _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_ECC)
-#define G_BCM1480_L2C_TAG_ECC(x)            _SB_GETVALUE(x, S_BCM1480_L2C_TAG_ECC, M_BCM1480_L2C_TAG_ECC)
+#define S_BCM1480_L2C_TAG_ECC		    40
+#define M_BCM1480_L2C_TAG_ECC		    _SB_MAKEMASK(6, S_BCM1480_L2C_TAG_ECC)
+#define V_BCM1480_L2C_TAG_ECC(x)	    _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_ECC)
+#define G_BCM1480_L2C_TAG_ECC(x)	    _SB_GETVALUE(x, S_BCM1480_L2C_TAG_ECC, M_BCM1480_L2C_TAG_ECC)
 
-#define S_BCM1480_L2C_TAG_WAY               46
-#define M_BCM1480_L2C_TAG_WAY               _SB_MAKEMASK(3, S_BCM1480_L2C_TAG_WAY)
-#define V_BCM1480_L2C_TAG_WAY(x)            _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_WAY)
-#define G_BCM1480_L2C_TAG_WAY(x)            _SB_GETVALUE(x, S_BCM1480_L2C_TAG_WAY, M_BCM1480_L2C_TAG_WAY)
+#define S_BCM1480_L2C_TAG_WAY		    46
+#define M_BCM1480_L2C_TAG_WAY		    _SB_MAKEMASK(3, S_BCM1480_L2C_TAG_WAY)
+#define V_BCM1480_L2C_TAG_WAY(x)	    _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_WAY)
+#define G_BCM1480_L2C_TAG_WAY(x)	    _SB_GETVALUE(x, S_BCM1480_L2C_TAG_WAY, M_BCM1480_L2C_TAG_WAY)
 
-#define M_BCM1480_L2C_TAG_DIRTY             _SB_MAKEMASK1(49)
-#define M_BCM1480_L2C_TAG_VALID             _SB_MAKEMASK1(50)
+#define M_BCM1480_L2C_TAG_DIRTY		    _SB_MAKEMASK1(49)
+#define M_BCM1480_L2C_TAG_VALID		    _SB_MAKEMASK1(50)
 
-#define S_BCM1480_L2C_DATA_ECC              51
-#define M_BCM1480_L2C_DATA_ECC              _SB_MAKEMASK(10, S_BCM1480_L2C_DATA_ECC)
-#define V_BCM1480_L2C_DATA_ECC(x)           _SB_MAKEVALUE(x, S_BCM1480_L2C_DATA_ECC)
-#define G_BCM1480_L2C_DATA_ECC(x)           _SB_GETVALUE(x, S_BCM1480_L2C_DATA_ECC, M_BCM1480_L2C_DATA_ECC)
+#define S_BCM1480_L2C_DATA_ECC		    51
+#define M_BCM1480_L2C_DATA_ECC		    _SB_MAKEMASK(10, S_BCM1480_L2C_DATA_ECC)
+#define V_BCM1480_L2C_DATA_ECC(x)	    _SB_MAKEVALUE(x, S_BCM1480_L2C_DATA_ECC)
+#define G_BCM1480_L2C_DATA_ECC(x)	    _SB_GETVALUE(x, S_BCM1480_L2C_DATA_ECC, M_BCM1480_L2C_DATA_ECC)
 
 
 /*
  * L2 Misc0 Value Register (Table 60)
  */
 
-#define S_BCM1480_L2C_MISC0_WAY_REMOTE      0
-#define M_BCM1480_L2C_MISC0_WAY_REMOTE      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_REMOTE)
+#define S_BCM1480_L2C_MISC0_WAY_REMOTE	    0
+#define M_BCM1480_L2C_MISC0_WAY_REMOTE	    _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_REMOTE)
 #define G_BCM1480_L2C_MISC0_WAY_REMOTE(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_REMOTE, M_BCM1480_L2C_MISC0_WAY_REMOTE)
 
-#define S_BCM1480_L2C_MISC0_WAY_LOCAL       8
-#define M_BCM1480_L2C_MISC0_WAY_LOCAL       _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_LOCAL)
+#define S_BCM1480_L2C_MISC0_WAY_LOCAL	    8
+#define M_BCM1480_L2C_MISC0_WAY_LOCAL	    _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_LOCAL)
 #define G_BCM1480_L2C_MISC0_WAY_LOCAL(x)    _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_LOCAL, M_BCM1480_L2C_MISC0_WAY_LOCAL)
 
-#define S_BCM1480_L2C_MISC0_WAY_ENABLE      16
-#define M_BCM1480_L2C_MISC0_WAY_ENABLE      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_ENABLE)
+#define S_BCM1480_L2C_MISC0_WAY_ENABLE	    16
+#define M_BCM1480_L2C_MISC0_WAY_ENABLE	    _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_ENABLE)
 #define G_BCM1480_L2C_MISC0_WAY_ENABLE(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_ENABLE, M_BCM1480_L2C_MISC0_WAY_ENABLE)
 
 #define S_BCM1480_L2C_MISC0_CACHE_DISABLE   24
 #define M_BCM1480_L2C_MISC0_CACHE_DISABLE   _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_DISABLE)
 #define G_BCM1480_L2C_MISC0_CACHE_DISABLE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_DISABLE, M_BCM1480_L2C_MISC0_CACHE_DISABLE)
 
-#define S_BCM1480_L2C_MISC0_CACHE_QUAD      26
-#define M_BCM1480_L2C_MISC0_CACHE_QUAD      _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_QUAD)
+#define S_BCM1480_L2C_MISC0_CACHE_QUAD	    26
+#define M_BCM1480_L2C_MISC0_CACHE_QUAD	    _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_QUAD)
 #define G_BCM1480_L2C_MISC0_CACHE_QUAD(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_QUAD, M_BCM1480_L2C_MISC0_CACHE_QUAD)
 
-#define S_BCM1480_L2C_MISC0_MC_PRIORITY      30
-#define M_BCM1480_L2C_MISC0_MC_PRIORITY      _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_MC_PRIORITY)
+#define S_BCM1480_L2C_MISC0_MC_PRIORITY	     30
+#define M_BCM1480_L2C_MISC0_MC_PRIORITY	     _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_MC_PRIORITY)
 
-#define S_BCM1480_L2C_MISC0_ECC_CLEANUP      31
-#define M_BCM1480_L2C_MISC0_ECC_CLEANUP      _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_ECC_CLEANUP)
+#define S_BCM1480_L2C_MISC0_ECC_CLEANUP	     31
+#define M_BCM1480_L2C_MISC0_ECC_CLEANUP	     _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_ECC_CLEANUP)
 
 
 /*
  * L2 Misc1 Value Register (Table 60)
  */
 
-#define S_BCM1480_L2C_MISC1_WAY_AGENT_0      0
-#define M_BCM1480_L2C_MISC1_WAY_AGENT_0      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_0)
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_0	     0
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_0	     _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_0)
 #define G_BCM1480_L2C_MISC1_WAY_AGENT_0(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_0, M_BCM1480_L2C_MISC1_WAY_AGENT_0)
 
-#define S_BCM1480_L2C_MISC1_WAY_AGENT_1      8
-#define M_BCM1480_L2C_MISC1_WAY_AGENT_1      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_1)
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_1	     8
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_1	     _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_1)
 #define G_BCM1480_L2C_MISC1_WAY_AGENT_1(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_1, M_BCM1480_L2C_MISC1_WAY_AGENT_1)
 
-#define S_BCM1480_L2C_MISC1_WAY_AGENT_2      16
-#define M_BCM1480_L2C_MISC1_WAY_AGENT_2      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_2)
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_2	     16
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_2	     _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_2)
 #define G_BCM1480_L2C_MISC1_WAY_AGENT_2(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_2, M_BCM1480_L2C_MISC1_WAY_AGENT_2)
 
-#define S_BCM1480_L2C_MISC1_WAY_AGENT_3      24
-#define M_BCM1480_L2C_MISC1_WAY_AGENT_3      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_3)
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_3	     24
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_3	     _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_3)
 #define G_BCM1480_L2C_MISC1_WAY_AGENT_3(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_3, M_BCM1480_L2C_MISC1_WAY_AGENT_3)
 
-#define S_BCM1480_L2C_MISC1_WAY_AGENT_4      32
-#define M_BCM1480_L2C_MISC1_WAY_AGENT_4      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_4)
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_4	     32
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_4	     _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_4)
 #define G_BCM1480_L2C_MISC1_WAY_AGENT_4(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_4, M_BCM1480_L2C_MISC1_WAY_AGENT_4)
 
 
@@ -160,16 +160,16 @@
  * L2 Misc2 Value Register (Table 60)
  */
 
-#define S_BCM1480_L2C_MISC2_WAY_AGENT_8      0
-#define M_BCM1480_L2C_MISC2_WAY_AGENT_8      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_8)
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_8	     0
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_8	     _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_8)
 #define G_BCM1480_L2C_MISC2_WAY_AGENT_8(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_8, M_BCM1480_L2C_MISC2_WAY_AGENT_8)
 
-#define S_BCM1480_L2C_MISC2_WAY_AGENT_9      8
-#define M_BCM1480_L2C_MISC2_WAY_AGENT_9      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_9)
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_9	     8
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_9	     _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_9)
 #define G_BCM1480_L2C_MISC2_WAY_AGENT_9(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_9, M_BCM1480_L2C_MISC2_WAY_AGENT_9)
 
-#define S_BCM1480_L2C_MISC2_WAY_AGENT_A      16
-#define M_BCM1480_L2C_MISC2_WAY_AGENT_A      _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_A)
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_A	     16
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_A	     _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_A)
 #define G_BCM1480_L2C_MISC2_WAY_AGENT_A(x)   _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_A, M_BCM1480_L2C_MISC2_WAY_AGENT_A)
 
 
diff --git a/arch/mips/include/asm/sibyte/bcm1480_mc.h b/arch/mips/include/asm/sibyte/bcm1480_mc.h
index 4307a75..86908fd 100644
--- a/arch/mips/include/asm/sibyte/bcm1480_mc.h
+++ b/arch/mips/include/asm/sibyte/bcm1480_mc.h
@@ -1,7 +1,7 @@
 /*  *********************************************************************
     *  BCM1280/BCM1480 Board Support Package
     *
-    *  Memory Controller constants              File: bcm1480_mc.h
+    *  Memory Controller constants		File: bcm1480_mc.h
     *
     *  This module contains constants and macros useful for
     *  programming the memory controller.
@@ -39,33 +39,33 @@
  * Memory Channel Configuration Register (Table 81)
  */
 
-#define S_BCM1480_MC_INTLV0                 0
-#define M_BCM1480_MC_INTLV0                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0)
-#define V_BCM1480_MC_INTLV0(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0)
-#define G_BCM1480_MC_INTLV0(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0)
-#define V_BCM1480_MC_INTLV0_DEFAULT         V_BCM1480_MC_INTLV0(0)
+#define S_BCM1480_MC_INTLV0		    0
+#define M_BCM1480_MC_INTLV0		    _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x)		    _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0_DEFAULT	    V_BCM1480_MC_INTLV0(0)
 
-#define S_BCM1480_MC_INTLV1                 8
-#define M_BCM1480_MC_INTLV1                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1)
-#define V_BCM1480_MC_INTLV1(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1)
-#define G_BCM1480_MC_INTLV1(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1)
-#define V_BCM1480_MC_INTLV1_DEFAULT         V_BCM1480_MC_INTLV1(0)
+#define S_BCM1480_MC_INTLV1		    8
+#define M_BCM1480_MC_INTLV1		    _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x)		    _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1_DEFAULT	    V_BCM1480_MC_INTLV1(0)
 
-#define S_BCM1480_MC_INTLV2                 16
-#define M_BCM1480_MC_INTLV2                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV2)
-#define V_BCM1480_MC_INTLV2(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV2)
-#define G_BCM1480_MC_INTLV2(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV2, M_BCM1480_MC_INTLV2)
-#define V_BCM1480_MC_INTLV2_DEFAULT         V_BCM1480_MC_INTLV2(0)
+#define S_BCM1480_MC_INTLV2		    16
+#define M_BCM1480_MC_INTLV2		    _SB_MAKEMASK(6, S_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV2)
+#define G_BCM1480_MC_INTLV2(x)		    _SB_GETVALUE(x, S_BCM1480_MC_INTLV2, M_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2_DEFAULT	    V_BCM1480_MC_INTLV2(0)
 
-#define S_BCM1480_MC_CS_MODE                32
-#define M_BCM1480_MC_CS_MODE                _SB_MAKEMASK(8, S_BCM1480_MC_CS_MODE)
-#define V_BCM1480_MC_CS_MODE(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS_MODE)
-#define G_BCM1480_MC_CS_MODE(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS_MODE, M_BCM1480_MC_CS_MODE)
-#define V_BCM1480_MC_CS_MODE_DEFAULT        V_BCM1480_MC_CS_MODE(0)
+#define S_BCM1480_MC_CS_MODE		    32
+#define M_BCM1480_MC_CS_MODE		    _SB_MAKEMASK(8, S_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_CS_MODE)
+#define G_BCM1480_MC_CS_MODE(x)		    _SB_GETVALUE(x, S_BCM1480_MC_CS_MODE, M_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE_DEFAULT	    V_BCM1480_MC_CS_MODE(0)
 
-#define V_BCM1480_MC_CONFIG_DEFAULT         (V_BCM1480_MC_INTLV0_DEFAULT  | \
-                                     V_BCM1480_MC_INTLV1_DEFAULT  | \
-                                     V_BCM1480_MC_INTLV2_DEFAULT  | \
+#define V_BCM1480_MC_CONFIG_DEFAULT	    (V_BCM1480_MC_INTLV0_DEFAULT  | \
+				     V_BCM1480_MC_INTLV1_DEFAULT  | \
+				     V_BCM1480_MC_INTLV2_DEFAULT  | \
 				     V_BCM1480_MC_CS_MODE_DEFAULT)
 
 #define K_BCM1480_MC_CS01_MODE		    0x03
@@ -80,254 +80,254 @@
  * Chip Select Start Address Register (Table 82)
  */
 
-#define S_BCM1480_MC_CS0_START              0
-#define M_BCM1480_MC_CS0_START              _SB_MAKEMASK(12, S_BCM1480_MC_CS0_START)
-#define V_BCM1480_MC_CS0_START(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_START)
-#define G_BCM1480_MC_CS0_START(x)           _SB_GETVALUE(x, S_BCM1480_MC_CS0_START, M_BCM1480_MC_CS0_START)
+#define S_BCM1480_MC_CS0_START		    0
+#define M_BCM1480_MC_CS0_START		    _SB_MAKEMASK(12, S_BCM1480_MC_CS0_START)
+#define V_BCM1480_MC_CS0_START(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_START)
+#define G_BCM1480_MC_CS0_START(x)	    _SB_GETVALUE(x, S_BCM1480_MC_CS0_START, M_BCM1480_MC_CS0_START)
 
-#define S_BCM1480_MC_CS1_START              16
-#define M_BCM1480_MC_CS1_START              _SB_MAKEMASK(12, S_BCM1480_MC_CS1_START)
-#define V_BCM1480_MC_CS1_START(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_START)
-#define G_BCM1480_MC_CS1_START(x)           _SB_GETVALUE(x, S_BCM1480_MC_CS1_START, M_BCM1480_MC_CS1_START)
+#define S_BCM1480_MC_CS1_START		    16
+#define M_BCM1480_MC_CS1_START		    _SB_MAKEMASK(12, S_BCM1480_MC_CS1_START)
+#define V_BCM1480_MC_CS1_START(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_START)
+#define G_BCM1480_MC_CS1_START(x)	    _SB_GETVALUE(x, S_BCM1480_MC_CS1_START, M_BCM1480_MC_CS1_START)
 
-#define S_BCM1480_MC_CS2_START              32
-#define M_BCM1480_MC_CS2_START              _SB_MAKEMASK(12, S_BCM1480_MC_CS2_START)
-#define V_BCM1480_MC_CS2_START(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_START)
-#define G_BCM1480_MC_CS2_START(x)           _SB_GETVALUE(x, S_BCM1480_MC_CS2_START, M_BCM1480_MC_CS2_START)
+#define S_BCM1480_MC_CS2_START		    32
+#define M_BCM1480_MC_CS2_START		    _SB_MAKEMASK(12, S_BCM1480_MC_CS2_START)
+#define V_BCM1480_MC_CS2_START(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_START)
+#define G_BCM1480_MC_CS2_START(x)	    _SB_GETVALUE(x, S_BCM1480_MC_CS2_START, M_BCM1480_MC_CS2_START)
 
-#define S_BCM1480_MC_CS3_START              48
-#define M_BCM1480_MC_CS3_START              _SB_MAKEMASK(12, S_BCM1480_MC_CS3_START)
-#define V_BCM1480_MC_CS3_START(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_START)
-#define G_BCM1480_MC_CS3_START(x)           _SB_GETVALUE(x, S_BCM1480_MC_CS3_START, M_BCM1480_MC_CS3_START)
+#define S_BCM1480_MC_CS3_START		    48
+#define M_BCM1480_MC_CS3_START		    _SB_MAKEMASK(12, S_BCM1480_MC_CS3_START)
+#define V_BCM1480_MC_CS3_START(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_START)
+#define G_BCM1480_MC_CS3_START(x)	    _SB_GETVALUE(x, S_BCM1480_MC_CS3_START, M_BCM1480_MC_CS3_START)
 
 /*
  * Chip Select End Address Register (Table 83)
  */
 
-#define S_BCM1480_MC_CS0_END                0
-#define M_BCM1480_MC_CS0_END                _SB_MAKEMASK(12, S_BCM1480_MC_CS0_END)
-#define V_BCM1480_MC_CS0_END(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_END)
-#define G_BCM1480_MC_CS0_END(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS0_END, M_BCM1480_MC_CS0_END)
+#define S_BCM1480_MC_CS0_END		    0
+#define M_BCM1480_MC_CS0_END		    _SB_MAKEMASK(12, S_BCM1480_MC_CS0_END)
+#define V_BCM1480_MC_CS0_END(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_END)
+#define G_BCM1480_MC_CS0_END(x)		    _SB_GETVALUE(x, S_BCM1480_MC_CS0_END, M_BCM1480_MC_CS0_END)
 
-#define S_BCM1480_MC_CS1_END                16
-#define M_BCM1480_MC_CS1_END                _SB_MAKEMASK(12, S_BCM1480_MC_CS1_END)
-#define V_BCM1480_MC_CS1_END(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_END)
-#define G_BCM1480_MC_CS1_END(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS1_END, M_BCM1480_MC_CS1_END)
+#define S_BCM1480_MC_CS1_END		    16
+#define M_BCM1480_MC_CS1_END		    _SB_MAKEMASK(12, S_BCM1480_MC_CS1_END)
+#define V_BCM1480_MC_CS1_END(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_END)
+#define G_BCM1480_MC_CS1_END(x)		    _SB_GETVALUE(x, S_BCM1480_MC_CS1_END, M_BCM1480_MC_CS1_END)
 
-#define S_BCM1480_MC_CS2_END                32
-#define M_BCM1480_MC_CS2_END                _SB_MAKEMASK(12, S_BCM1480_MC_CS2_END)
-#define V_BCM1480_MC_CS2_END(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_END)
-#define G_BCM1480_MC_CS2_END(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS2_END, M_BCM1480_MC_CS2_END)
+#define S_BCM1480_MC_CS2_END		    32
+#define M_BCM1480_MC_CS2_END		    _SB_MAKEMASK(12, S_BCM1480_MC_CS2_END)
+#define V_BCM1480_MC_CS2_END(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_END)
+#define G_BCM1480_MC_CS2_END(x)		    _SB_GETVALUE(x, S_BCM1480_MC_CS2_END, M_BCM1480_MC_CS2_END)
 
-#define S_BCM1480_MC_CS3_END                48
-#define M_BCM1480_MC_CS3_END                _SB_MAKEMASK(12, S_BCM1480_MC_CS3_END)
-#define V_BCM1480_MC_CS3_END(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_END)
-#define G_BCM1480_MC_CS3_END(x)             _SB_GETVALUE(x, S_BCM1480_MC_CS3_END, M_BCM1480_MC_CS3_END)
+#define S_BCM1480_MC_CS3_END		    48
+#define M_BCM1480_MC_CS3_END		    _SB_MAKEMASK(12, S_BCM1480_MC_CS3_END)
+#define V_BCM1480_MC_CS3_END(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_END)
+#define G_BCM1480_MC_CS3_END(x)		    _SB_GETVALUE(x, S_BCM1480_MC_CS3_END, M_BCM1480_MC_CS3_END)
 
 /*
  * Row Address Bit Select Register 0 (Table 84)
  */
 
-#define S_BCM1480_MC_ROW00                  0
-#define M_BCM1480_MC_ROW00                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW00)
-#define V_BCM1480_MC_ROW00(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW00)
-#define G_BCM1480_MC_ROW00(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW00, M_BCM1480_MC_ROW00)
+#define S_BCM1480_MC_ROW00		    0
+#define M_BCM1480_MC_ROW00		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW00)
+#define V_BCM1480_MC_ROW00(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW00)
+#define G_BCM1480_MC_ROW00(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW00, M_BCM1480_MC_ROW00)
 
-#define S_BCM1480_MC_ROW01                  8
-#define M_BCM1480_MC_ROW01                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW01)
-#define V_BCM1480_MC_ROW01(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW01)
-#define G_BCM1480_MC_ROW01(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW01, M_BCM1480_MC_ROW01)
+#define S_BCM1480_MC_ROW01		    8
+#define M_BCM1480_MC_ROW01		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW01)
+#define V_BCM1480_MC_ROW01(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW01)
+#define G_BCM1480_MC_ROW01(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW01, M_BCM1480_MC_ROW01)
 
-#define S_BCM1480_MC_ROW02                  16
-#define M_BCM1480_MC_ROW02                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW02)
-#define V_BCM1480_MC_ROW02(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW02)
-#define G_BCM1480_MC_ROW02(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW02, M_BCM1480_MC_ROW02)
+#define S_BCM1480_MC_ROW02		    16
+#define M_BCM1480_MC_ROW02		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW02)
+#define V_BCM1480_MC_ROW02(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW02)
+#define G_BCM1480_MC_ROW02(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW02, M_BCM1480_MC_ROW02)
 
-#define S_BCM1480_MC_ROW03                  24
-#define M_BCM1480_MC_ROW03                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW03)
-#define V_BCM1480_MC_ROW03(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW03)
-#define G_BCM1480_MC_ROW03(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW03, M_BCM1480_MC_ROW03)
+#define S_BCM1480_MC_ROW03		    24
+#define M_BCM1480_MC_ROW03		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW03)
+#define V_BCM1480_MC_ROW03(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW03)
+#define G_BCM1480_MC_ROW03(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW03, M_BCM1480_MC_ROW03)
 
-#define S_BCM1480_MC_ROW04                  32
-#define M_BCM1480_MC_ROW04                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW04)
-#define V_BCM1480_MC_ROW04(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW04)
-#define G_BCM1480_MC_ROW04(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW04, M_BCM1480_MC_ROW04)
+#define S_BCM1480_MC_ROW04		    32
+#define M_BCM1480_MC_ROW04		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW04)
+#define V_BCM1480_MC_ROW04(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW04)
+#define G_BCM1480_MC_ROW04(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW04, M_BCM1480_MC_ROW04)
 
-#define S_BCM1480_MC_ROW05                  40
-#define M_BCM1480_MC_ROW05                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW05)
-#define V_BCM1480_MC_ROW05(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW05)
-#define G_BCM1480_MC_ROW05(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW05, M_BCM1480_MC_ROW05)
+#define S_BCM1480_MC_ROW05		    40
+#define M_BCM1480_MC_ROW05		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW05)
+#define V_BCM1480_MC_ROW05(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW05)
+#define G_BCM1480_MC_ROW05(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW05, M_BCM1480_MC_ROW05)
 
-#define S_BCM1480_MC_ROW06                  48
-#define M_BCM1480_MC_ROW06                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW06)
-#define V_BCM1480_MC_ROW06(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW06)
-#define G_BCM1480_MC_ROW06(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW06, M_BCM1480_MC_ROW06)
+#define S_BCM1480_MC_ROW06		    48
+#define M_BCM1480_MC_ROW06		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW06)
+#define V_BCM1480_MC_ROW06(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW06)
+#define G_BCM1480_MC_ROW06(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW06, M_BCM1480_MC_ROW06)
 
-#define S_BCM1480_MC_ROW07                  56
-#define M_BCM1480_MC_ROW07                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW07)
-#define V_BCM1480_MC_ROW07(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW07)
-#define G_BCM1480_MC_ROW07(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW07, M_BCM1480_MC_ROW07)
+#define S_BCM1480_MC_ROW07		    56
+#define M_BCM1480_MC_ROW07		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW07)
+#define V_BCM1480_MC_ROW07(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW07)
+#define G_BCM1480_MC_ROW07(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW07, M_BCM1480_MC_ROW07)
 
 /*
  * Row Address Bit Select Register 1 (Table 85)
  */
 
-#define S_BCM1480_MC_ROW08                  0
-#define M_BCM1480_MC_ROW08                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW08)
-#define V_BCM1480_MC_ROW08(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW08)
-#define G_BCM1480_MC_ROW08(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW08, M_BCM1480_MC_ROW08)
+#define S_BCM1480_MC_ROW08		    0
+#define M_BCM1480_MC_ROW08		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW08)
+#define V_BCM1480_MC_ROW08(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW08)
+#define G_BCM1480_MC_ROW08(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW08, M_BCM1480_MC_ROW08)
 
-#define S_BCM1480_MC_ROW09                  8
-#define M_BCM1480_MC_ROW09                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW09)
-#define V_BCM1480_MC_ROW09(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW09)
-#define G_BCM1480_MC_ROW09(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW09, M_BCM1480_MC_ROW09)
+#define S_BCM1480_MC_ROW09		    8
+#define M_BCM1480_MC_ROW09		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW09)
+#define V_BCM1480_MC_ROW09(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW09)
+#define G_BCM1480_MC_ROW09(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW09, M_BCM1480_MC_ROW09)
 
-#define S_BCM1480_MC_ROW10                  16
-#define M_BCM1480_MC_ROW10                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW10)
-#define V_BCM1480_MC_ROW10(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW10)
-#define G_BCM1480_MC_ROW10(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW10, M_BCM1480_MC_ROW10)
+#define S_BCM1480_MC_ROW10		    16
+#define M_BCM1480_MC_ROW10		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW10)
+#define V_BCM1480_MC_ROW10(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW10)
+#define G_BCM1480_MC_ROW10(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW10, M_BCM1480_MC_ROW10)
 
-#define S_BCM1480_MC_ROW11                  24
-#define M_BCM1480_MC_ROW11                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW11)
-#define V_BCM1480_MC_ROW11(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW11)
-#define G_BCM1480_MC_ROW11(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW11, M_BCM1480_MC_ROW11)
+#define S_BCM1480_MC_ROW11		    24
+#define M_BCM1480_MC_ROW11		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW11)
+#define V_BCM1480_MC_ROW11(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW11)
+#define G_BCM1480_MC_ROW11(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW11, M_BCM1480_MC_ROW11)
 
-#define S_BCM1480_MC_ROW12                  32
-#define M_BCM1480_MC_ROW12                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW12)
-#define V_BCM1480_MC_ROW12(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW12)
-#define G_BCM1480_MC_ROW12(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW12, M_BCM1480_MC_ROW12)
+#define S_BCM1480_MC_ROW12		    32
+#define M_BCM1480_MC_ROW12		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW12)
+#define V_BCM1480_MC_ROW12(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW12)
+#define G_BCM1480_MC_ROW12(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW12, M_BCM1480_MC_ROW12)
 
-#define S_BCM1480_MC_ROW13                  40
-#define M_BCM1480_MC_ROW13                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW13)
-#define V_BCM1480_MC_ROW13(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW13)
-#define G_BCM1480_MC_ROW13(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW13, M_BCM1480_MC_ROW13)
+#define S_BCM1480_MC_ROW13		    40
+#define M_BCM1480_MC_ROW13		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW13)
+#define V_BCM1480_MC_ROW13(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW13)
+#define G_BCM1480_MC_ROW13(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW13, M_BCM1480_MC_ROW13)
 
-#define S_BCM1480_MC_ROW14                  48
-#define M_BCM1480_MC_ROW14                  _SB_MAKEMASK(6, S_BCM1480_MC_ROW14)
-#define V_BCM1480_MC_ROW14(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_ROW14)
-#define G_BCM1480_MC_ROW14(x)               _SB_GETVALUE(x, S_BCM1480_MC_ROW14, M_BCM1480_MC_ROW14)
+#define S_BCM1480_MC_ROW14		    48
+#define M_BCM1480_MC_ROW14		    _SB_MAKEMASK(6, S_BCM1480_MC_ROW14)
+#define V_BCM1480_MC_ROW14(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ROW14)
+#define G_BCM1480_MC_ROW14(x)		    _SB_GETVALUE(x, S_BCM1480_MC_ROW14, M_BCM1480_MC_ROW14)
 
-#define K_BCM1480_MC_ROWX_BIT_SPACING  	    8
+#define K_BCM1480_MC_ROWX_BIT_SPACING	    8
 
 /*
  * Column Address Bit Select Register 0 (Table 86)
  */
 
-#define S_BCM1480_MC_COL00                  0
-#define M_BCM1480_MC_COL00                  _SB_MAKEMASK(6, S_BCM1480_MC_COL00)
-#define V_BCM1480_MC_COL00(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL00)
-#define G_BCM1480_MC_COL00(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL00, M_BCM1480_MC_COL00)
+#define S_BCM1480_MC_COL00		    0
+#define M_BCM1480_MC_COL00		    _SB_MAKEMASK(6, S_BCM1480_MC_COL00)
+#define V_BCM1480_MC_COL00(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL00)
+#define G_BCM1480_MC_COL00(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL00, M_BCM1480_MC_COL00)
 
-#define S_BCM1480_MC_COL01                  8
-#define M_BCM1480_MC_COL01                  _SB_MAKEMASK(6, S_BCM1480_MC_COL01)
-#define V_BCM1480_MC_COL01(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL01)
-#define G_BCM1480_MC_COL01(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL01, M_BCM1480_MC_COL01)
+#define S_BCM1480_MC_COL01		    8
+#define M_BCM1480_MC_COL01		    _SB_MAKEMASK(6, S_BCM1480_MC_COL01)
+#define V_BCM1480_MC_COL01(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL01)
+#define G_BCM1480_MC_COL01(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL01, M_BCM1480_MC_COL01)
 
-#define S_BCM1480_MC_COL02                  16
-#define M_BCM1480_MC_COL02                  _SB_MAKEMASK(6, S_BCM1480_MC_COL02)
-#define V_BCM1480_MC_COL02(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL02)
-#define G_BCM1480_MC_COL02(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL02, M_BCM1480_MC_COL02)
+#define S_BCM1480_MC_COL02		    16
+#define M_BCM1480_MC_COL02		    _SB_MAKEMASK(6, S_BCM1480_MC_COL02)
+#define V_BCM1480_MC_COL02(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL02)
+#define G_BCM1480_MC_COL02(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL02, M_BCM1480_MC_COL02)
 
-#define S_BCM1480_MC_COL03                  24
-#define M_BCM1480_MC_COL03                  _SB_MAKEMASK(6, S_BCM1480_MC_COL03)
-#define V_BCM1480_MC_COL03(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL03)
-#define G_BCM1480_MC_COL03(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL03, M_BCM1480_MC_COL03)
+#define S_BCM1480_MC_COL03		    24
+#define M_BCM1480_MC_COL03		    _SB_MAKEMASK(6, S_BCM1480_MC_COL03)
+#define V_BCM1480_MC_COL03(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL03)
+#define G_BCM1480_MC_COL03(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL03, M_BCM1480_MC_COL03)
 
-#define S_BCM1480_MC_COL04                  32
-#define M_BCM1480_MC_COL04                  _SB_MAKEMASK(6, S_BCM1480_MC_COL04)
-#define V_BCM1480_MC_COL04(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL04)
-#define G_BCM1480_MC_COL04(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL04, M_BCM1480_MC_COL04)
+#define S_BCM1480_MC_COL04		    32
+#define M_BCM1480_MC_COL04		    _SB_MAKEMASK(6, S_BCM1480_MC_COL04)
+#define V_BCM1480_MC_COL04(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL04)
+#define G_BCM1480_MC_COL04(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL04, M_BCM1480_MC_COL04)
 
-#define S_BCM1480_MC_COL05                  40
-#define M_BCM1480_MC_COL05                  _SB_MAKEMASK(6, S_BCM1480_MC_COL05)
-#define V_BCM1480_MC_COL05(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL05)
-#define G_BCM1480_MC_COL05(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL05, M_BCM1480_MC_COL05)
+#define S_BCM1480_MC_COL05		    40
+#define M_BCM1480_MC_COL05		    _SB_MAKEMASK(6, S_BCM1480_MC_COL05)
+#define V_BCM1480_MC_COL05(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL05)
+#define G_BCM1480_MC_COL05(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL05, M_BCM1480_MC_COL05)
 
-#define S_BCM1480_MC_COL06                  48
-#define M_BCM1480_MC_COL06                  _SB_MAKEMASK(6, S_BCM1480_MC_COL06)
-#define V_BCM1480_MC_COL06(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL06)
-#define G_BCM1480_MC_COL06(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL06, M_BCM1480_MC_COL06)
+#define S_BCM1480_MC_COL06		    48
+#define M_BCM1480_MC_COL06		    _SB_MAKEMASK(6, S_BCM1480_MC_COL06)
+#define V_BCM1480_MC_COL06(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL06)
+#define G_BCM1480_MC_COL06(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL06, M_BCM1480_MC_COL06)
 
-#define S_BCM1480_MC_COL07                  56
-#define M_BCM1480_MC_COL07                  _SB_MAKEMASK(6, S_BCM1480_MC_COL07)
-#define V_BCM1480_MC_COL07(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL07)
-#define G_BCM1480_MC_COL07(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL07, M_BCM1480_MC_COL07)
+#define S_BCM1480_MC_COL07		    56
+#define M_BCM1480_MC_COL07		    _SB_MAKEMASK(6, S_BCM1480_MC_COL07)
+#define V_BCM1480_MC_COL07(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL07)
+#define G_BCM1480_MC_COL07(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL07, M_BCM1480_MC_COL07)
 
 /*
  * Column Address Bit Select Register 1 (Table 87)
  */
 
-#define S_BCM1480_MC_COL08                  0
-#define M_BCM1480_MC_COL08                  _SB_MAKEMASK(6, S_BCM1480_MC_COL08)
-#define V_BCM1480_MC_COL08(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL08)
-#define G_BCM1480_MC_COL08(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL08, M_BCM1480_MC_COL08)
+#define S_BCM1480_MC_COL08		    0
+#define M_BCM1480_MC_COL08		    _SB_MAKEMASK(6, S_BCM1480_MC_COL08)
+#define V_BCM1480_MC_COL08(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL08)
+#define G_BCM1480_MC_COL08(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL08, M_BCM1480_MC_COL08)
 
-#define S_BCM1480_MC_COL09                  8
-#define M_BCM1480_MC_COL09                  _SB_MAKEMASK(6, S_BCM1480_MC_COL09)
-#define V_BCM1480_MC_COL09(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL09)
-#define G_BCM1480_MC_COL09(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL09, M_BCM1480_MC_COL09)
+#define S_BCM1480_MC_COL09		    8
+#define M_BCM1480_MC_COL09		    _SB_MAKEMASK(6, S_BCM1480_MC_COL09)
+#define V_BCM1480_MC_COL09(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL09)
+#define G_BCM1480_MC_COL09(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL09, M_BCM1480_MC_COL09)
 
-#define S_BCM1480_MC_COL10                  16   /* not a valid position, must be prog as 0 */
+#define S_BCM1480_MC_COL10		    16	 /* not a valid position, must be prog as 0 */
 
-#define S_BCM1480_MC_COL11                  24
-#define M_BCM1480_MC_COL11                  _SB_MAKEMASK(6, S_BCM1480_MC_COL11)
-#define V_BCM1480_MC_COL11(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL11)
-#define G_BCM1480_MC_COL11(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL11, M_BCM1480_MC_COL11)
+#define S_BCM1480_MC_COL11		    24
+#define M_BCM1480_MC_COL11		    _SB_MAKEMASK(6, S_BCM1480_MC_COL11)
+#define V_BCM1480_MC_COL11(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL11)
+#define G_BCM1480_MC_COL11(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL11, M_BCM1480_MC_COL11)
 
-#define S_BCM1480_MC_COL12                  32
-#define M_BCM1480_MC_COL12                  _SB_MAKEMASK(6, S_BCM1480_MC_COL12)
-#define V_BCM1480_MC_COL12(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL12)
-#define G_BCM1480_MC_COL12(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL12, M_BCM1480_MC_COL12)
+#define S_BCM1480_MC_COL12		    32
+#define M_BCM1480_MC_COL12		    _SB_MAKEMASK(6, S_BCM1480_MC_COL12)
+#define V_BCM1480_MC_COL12(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL12)
+#define G_BCM1480_MC_COL12(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL12, M_BCM1480_MC_COL12)
 
-#define S_BCM1480_MC_COL13                  40
-#define M_BCM1480_MC_COL13                  _SB_MAKEMASK(6, S_BCM1480_MC_COL13)
-#define V_BCM1480_MC_COL13(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL13)
-#define G_BCM1480_MC_COL13(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL13, M_BCM1480_MC_COL13)
+#define S_BCM1480_MC_COL13		    40
+#define M_BCM1480_MC_COL13		    _SB_MAKEMASK(6, S_BCM1480_MC_COL13)
+#define V_BCM1480_MC_COL13(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL13)
+#define G_BCM1480_MC_COL13(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL13, M_BCM1480_MC_COL13)
 
-#define S_BCM1480_MC_COL14                  48
-#define M_BCM1480_MC_COL14                  _SB_MAKEMASK(6, S_BCM1480_MC_COL14)
-#define V_BCM1480_MC_COL14(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_COL14)
-#define G_BCM1480_MC_COL14(x)               _SB_GETVALUE(x, S_BCM1480_MC_COL14, M_BCM1480_MC_COL14)
+#define S_BCM1480_MC_COL14		    48
+#define M_BCM1480_MC_COL14		    _SB_MAKEMASK(6, S_BCM1480_MC_COL14)
+#define V_BCM1480_MC_COL14(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COL14)
+#define G_BCM1480_MC_COL14(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COL14, M_BCM1480_MC_COL14)
 
-#define K_BCM1480_MC_COLX_BIT_SPACING  	    8
+#define K_BCM1480_MC_COLX_BIT_SPACING	    8
 
 /*
  * CS0 and CS1 Bank Address Bit Select Register (Table 88)
  */
 
-#define S_BCM1480_MC_CS01_BANK0             0
-#define M_BCM1480_MC_CS01_BANK0             _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK0)
-#define V_BCM1480_MC_CS01_BANK0(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK0)
-#define G_BCM1480_MC_CS01_BANK0(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK0, M_BCM1480_MC_CS01_BANK0)
+#define S_BCM1480_MC_CS01_BANK0		    0
+#define M_BCM1480_MC_CS01_BANK0		    _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK0)
+#define V_BCM1480_MC_CS01_BANK0(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK0)
+#define G_BCM1480_MC_CS01_BANK0(x)	    _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK0, M_BCM1480_MC_CS01_BANK0)
 
-#define S_BCM1480_MC_CS01_BANK1             8
-#define M_BCM1480_MC_CS01_BANK1             _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK1)
-#define V_BCM1480_MC_CS01_BANK1(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK1)
-#define G_BCM1480_MC_CS01_BANK1(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK1, M_BCM1480_MC_CS01_BANK1)
+#define S_BCM1480_MC_CS01_BANK1		    8
+#define M_BCM1480_MC_CS01_BANK1		    _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK1)
+#define V_BCM1480_MC_CS01_BANK1(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK1)
+#define G_BCM1480_MC_CS01_BANK1(x)	    _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK1, M_BCM1480_MC_CS01_BANK1)
 
-#define S_BCM1480_MC_CS01_BANK2             16
-#define M_BCM1480_MC_CS01_BANK2             _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK2)
-#define V_BCM1480_MC_CS01_BANK2(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK2)
-#define G_BCM1480_MC_CS01_BANK2(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK2, M_BCM1480_MC_CS01_BANK2)
+#define S_BCM1480_MC_CS01_BANK2		    16
+#define M_BCM1480_MC_CS01_BANK2		    _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK2)
+#define V_BCM1480_MC_CS01_BANK2(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK2)
+#define G_BCM1480_MC_CS01_BANK2(x)	    _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK2, M_BCM1480_MC_CS01_BANK2)
 
 /*
  * CS2 and CS3 Bank Address Bit Select Register (Table 89)
  */
 
-#define S_BCM1480_MC_CS23_BANK0             0
-#define M_BCM1480_MC_CS23_BANK0             _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK0)
-#define V_BCM1480_MC_CS23_BANK0(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK0)
-#define G_BCM1480_MC_CS23_BANK0(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK0, M_BCM1480_MC_CS23_BANK0)
+#define S_BCM1480_MC_CS23_BANK0		    0
+#define M_BCM1480_MC_CS23_BANK0		    _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK0)
+#define V_BCM1480_MC_CS23_BANK0(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK0)
+#define G_BCM1480_MC_CS23_BANK0(x)	    _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK0, M_BCM1480_MC_CS23_BANK0)
 
-#define S_BCM1480_MC_CS23_BANK1             8
-#define M_BCM1480_MC_CS23_BANK1             _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK1)
-#define V_BCM1480_MC_CS23_BANK1(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK1)
-#define G_BCM1480_MC_CS23_BANK1(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK1, M_BCM1480_MC_CS23_BANK1)
+#define S_BCM1480_MC_CS23_BANK1		    8
+#define M_BCM1480_MC_CS23_BANK1		    _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK1)
+#define V_BCM1480_MC_CS23_BANK1(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK1)
+#define G_BCM1480_MC_CS23_BANK1(x)	    _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK1, M_BCM1480_MC_CS23_BANK1)
 
-#define S_BCM1480_MC_CS23_BANK2             16
-#define M_BCM1480_MC_CS23_BANK2             _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK2)
-#define V_BCM1480_MC_CS23_BANK2(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK2)
-#define G_BCM1480_MC_CS23_BANK2(x)          _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK2, M_BCM1480_MC_CS23_BANK2)
+#define S_BCM1480_MC_CS23_BANK2		    16
+#define M_BCM1480_MC_CS23_BANK2		    _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK2)
+#define V_BCM1480_MC_CS23_BANK2(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK2)
+#define G_BCM1480_MC_CS23_BANK2(x)	    _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK2, M_BCM1480_MC_CS23_BANK2)
 
 #define K_BCM1480_MC_CSXX_BANKX_BIT_SPACING  8
 
@@ -335,19 +335,19 @@
  * DRAM Command Register (Table 90)
  */
 
-#define S_BCM1480_MC_COMMAND                0
-#define M_BCM1480_MC_COMMAND                _SB_MAKEMASK(4, S_BCM1480_MC_COMMAND)
-#define V_BCM1480_MC_COMMAND(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_COMMAND)
-#define G_BCM1480_MC_COMMAND(x)             _SB_GETVALUE(x, S_BCM1480_MC_COMMAND, M_BCM1480_MC_COMMAND)
+#define S_BCM1480_MC_COMMAND		    0
+#define M_BCM1480_MC_COMMAND		    _SB_MAKEMASK(4, S_BCM1480_MC_COMMAND)
+#define V_BCM1480_MC_COMMAND(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_COMMAND)
+#define G_BCM1480_MC_COMMAND(x)		    _SB_GETVALUE(x, S_BCM1480_MC_COMMAND, M_BCM1480_MC_COMMAND)
 
-#define K_BCM1480_MC_COMMAND_EMRS           0
-#define K_BCM1480_MC_COMMAND_MRS            1
-#define K_BCM1480_MC_COMMAND_PRE            2
-#define K_BCM1480_MC_COMMAND_AR             3
-#define K_BCM1480_MC_COMMAND_SETRFSH        4
-#define K_BCM1480_MC_COMMAND_CLRRFSH        5
-#define K_BCM1480_MC_COMMAND_SETPWRDN       6
-#define K_BCM1480_MC_COMMAND_CLRPWRDN       7
+#define K_BCM1480_MC_COMMAND_EMRS	    0
+#define K_BCM1480_MC_COMMAND_MRS	    1
+#define K_BCM1480_MC_COMMAND_PRE	    2
+#define K_BCM1480_MC_COMMAND_AR		    3
+#define K_BCM1480_MC_COMMAND_SETRFSH	    4
+#define K_BCM1480_MC_COMMAND_CLRRFSH	    5
+#define K_BCM1480_MC_COMMAND_SETPWRDN	    6
+#define K_BCM1480_MC_COMMAND_CLRPWRDN	    7
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
 #define K_BCM1480_MC_COMMAND_EMRS2	    8
@@ -356,61 +356,61 @@
 #define K_BCM1480_MC_COMMAND_DISABLE_MCLK   11
 #endif
 
-#define V_BCM1480_MC_COMMAND_EMRS           V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS)
-#define V_BCM1480_MC_COMMAND_MRS            V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_MRS)
-#define V_BCM1480_MC_COMMAND_PRE            V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_PRE)
-#define V_BCM1480_MC_COMMAND_AR             V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_AR)
-#define V_BCM1480_MC_COMMAND_SETRFSH        V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETRFSH)
-#define V_BCM1480_MC_COMMAND_CLRRFSH        V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRRFSH)
-#define V_BCM1480_MC_COMMAND_SETPWRDN       V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETPWRDN)
-#define V_BCM1480_MC_COMMAND_CLRPWRDN       V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRPWRDN)
+#define V_BCM1480_MC_COMMAND_EMRS	    V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS)
+#define V_BCM1480_MC_COMMAND_MRS	    V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_MRS)
+#define V_BCM1480_MC_COMMAND_PRE	    V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_PRE)
+#define V_BCM1480_MC_COMMAND_AR		    V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_AR)
+#define V_BCM1480_MC_COMMAND_SETRFSH	    V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETRFSH)
+#define V_BCM1480_MC_COMMAND_CLRRFSH	    V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRRFSH)
+#define V_BCM1480_MC_COMMAND_SETPWRDN	    V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETPWRDN)
+#define V_BCM1480_MC_COMMAND_CLRPWRDN	    V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRPWRDN)
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
-#define V_BCM1480_MC_COMMAND_EMRS2          V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS2)
-#define V_BCM1480_MC_COMMAND_EMRS3          V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS3)
+#define V_BCM1480_MC_COMMAND_EMRS2	    V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS2)
+#define V_BCM1480_MC_COMMAND_EMRS3	    V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS3)
 #define V_BCM1480_MC_COMMAND_ENABLE_MCLK    V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_ENABLE_MCLK)
 #define V_BCM1480_MC_COMMAND_DISABLE_MCLK   V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_DISABLE_MCLK)
 #endif
 
 #define S_BCM1480_MC_CS0		    4
-#define M_BCM1480_MC_CS0                    _SB_MAKEMASK1(4)
-#define M_BCM1480_MC_CS1                    _SB_MAKEMASK1(5)
-#define M_BCM1480_MC_CS2                    _SB_MAKEMASK1(6)
-#define M_BCM1480_MC_CS3                    _SB_MAKEMASK1(7)
-#define M_BCM1480_MC_CS4                    _SB_MAKEMASK1(8)
-#define M_BCM1480_MC_CS5                    _SB_MAKEMASK1(9)
-#define M_BCM1480_MC_CS6                    _SB_MAKEMASK1(10)
-#define M_BCM1480_MC_CS7                    _SB_MAKEMASK1(11)
+#define M_BCM1480_MC_CS0		    _SB_MAKEMASK1(4)
+#define M_BCM1480_MC_CS1		    _SB_MAKEMASK1(5)
+#define M_BCM1480_MC_CS2		    _SB_MAKEMASK1(6)
+#define M_BCM1480_MC_CS3		    _SB_MAKEMASK1(7)
+#define M_BCM1480_MC_CS4		    _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_CS5		    _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_CS6		    _SB_MAKEMASK1(10)
+#define M_BCM1480_MC_CS7		    _SB_MAKEMASK1(11)
 
-#define M_BCM1480_MC_CS                  _SB_MAKEMASK(8, S_BCM1480_MC_CS0)
-#define V_BCM1480_MC_CS(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_CS0)
-#define G_BCM1480_MC_CS(x)               _SB_GETVALUE(x, S_BCM1480_MC_CS0, M_BCM1480_MC_CS0)
+#define M_BCM1480_MC_CS			 _SB_MAKEMASK(8, S_BCM1480_MC_CS0)
+#define V_BCM1480_MC_CS(x)		 _SB_MAKEVALUE(x, S_BCM1480_MC_CS0)
+#define G_BCM1480_MC_CS(x)		 _SB_GETVALUE(x, S_BCM1480_MC_CS0, M_BCM1480_MC_CS0)
 
-#define M_BCM1480_MC_CMD_ACTIVE             _SB_MAKEMASK1(16)
+#define M_BCM1480_MC_CMD_ACTIVE		    _SB_MAKEMASK1(16)
 
 /*
  * DRAM Mode Register (Table 91)
  */
 
-#define S_BCM1480_MC_EMODE                  0
-#define M_BCM1480_MC_EMODE                  _SB_MAKEMASK(15, S_BCM1480_MC_EMODE)
-#define V_BCM1480_MC_EMODE(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_EMODE)
-#define G_BCM1480_MC_EMODE(x)               _SB_GETVALUE(x, S_BCM1480_MC_EMODE, M_BCM1480_MC_EMODE)
-#define V_BCM1480_MC_EMODE_DEFAULT          V_BCM1480_MC_EMODE(0)
+#define S_BCM1480_MC_EMODE		    0
+#define M_BCM1480_MC_EMODE		    _SB_MAKEMASK(15, S_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_EMODE)
+#define G_BCM1480_MC_EMODE(x)		    _SB_GETVALUE(x, S_BCM1480_MC_EMODE, M_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE_DEFAULT	    V_BCM1480_MC_EMODE(0)
 
-#define S_BCM1480_MC_MODE                   16
-#define M_BCM1480_MC_MODE                   _SB_MAKEMASK(15, S_BCM1480_MC_MODE)
-#define V_BCM1480_MC_MODE(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_MODE)
-#define G_BCM1480_MC_MODE(x)                _SB_GETVALUE(x, S_BCM1480_MC_MODE, M_BCM1480_MC_MODE)
-#define V_BCM1480_MC_MODE_DEFAULT           V_BCM1480_MC_MODE(0)
+#define S_BCM1480_MC_MODE		    16
+#define M_BCM1480_MC_MODE		    _SB_MAKEMASK(15, S_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_MODE)
+#define G_BCM1480_MC_MODE(x)		    _SB_GETVALUE(x, S_BCM1480_MC_MODE, M_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE_DEFAULT	    V_BCM1480_MC_MODE(0)
 
-#define S_BCM1480_MC_DRAM_TYPE              32
-#define M_BCM1480_MC_DRAM_TYPE              _SB_MAKEMASK(4, S_BCM1480_MC_DRAM_TYPE)
-#define V_BCM1480_MC_DRAM_TYPE(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_DRAM_TYPE)
-#define G_BCM1480_MC_DRAM_TYPE(x)           _SB_GETVALUE(x, S_BCM1480_MC_DRAM_TYPE, M_BCM1480_MC_DRAM_TYPE)
+#define S_BCM1480_MC_DRAM_TYPE		    32
+#define M_BCM1480_MC_DRAM_TYPE		    _SB_MAKEMASK(4, S_BCM1480_MC_DRAM_TYPE)
+#define V_BCM1480_MC_DRAM_TYPE(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_DRAM_TYPE)
+#define G_BCM1480_MC_DRAM_TYPE(x)	    _SB_GETVALUE(x, S_BCM1480_MC_DRAM_TYPE, M_BCM1480_MC_DRAM_TYPE)
 
-#define K_BCM1480_MC_DRAM_TYPE_JEDEC        0
-#define K_BCM1480_MC_DRAM_TYPE_FCRAM        1
+#define K_BCM1480_MC_DRAM_TYPE_JEDEC	    0
+#define K_BCM1480_MC_DRAM_TYPE_FCRAM	    1
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
 #define K_BCM1480_MC_DRAM_TYPE_DDR2	    2
@@ -418,27 +418,27 @@
 
 #define K_BCM1480_MC_DRAM_TYPE_DDR2_PASS1   0
 
-#define V_BCM1480_MC_DRAM_TYPE_JEDEC        V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC)
-#define V_BCM1480_MC_DRAM_TYPE_FCRAM        V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM)
+#define V_BCM1480_MC_DRAM_TYPE_JEDEC	    V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC)
+#define V_BCM1480_MC_DRAM_TYPE_FCRAM	    V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM)
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
 #define V_BCM1480_MC_DRAM_TYPE_DDR2	    V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_DDR2)
 #endif
 
-#define M_BCM1480_MC_GANGED                 _SB_MAKEMASK1(36)
-#define M_BCM1480_MC_BY9_INTF               _SB_MAKEMASK1(37)
-#define M_BCM1480_MC_FORCE_ECC64            _SB_MAKEMASK1(38)
-#define M_BCM1480_MC_ECC_DISABLE            _SB_MAKEMASK1(39)
+#define M_BCM1480_MC_GANGED		    _SB_MAKEMASK1(36)
+#define M_BCM1480_MC_BY9_INTF		    _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_FORCE_ECC64	    _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_ECC_DISABLE	    _SB_MAKEMASK1(39)
 
-#define S_BCM1480_MC_PG_POLICY              40
-#define M_BCM1480_MC_PG_POLICY              _SB_MAKEMASK(2, S_BCM1480_MC_PG_POLICY)
-#define V_BCM1480_MC_PG_POLICY(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_PG_POLICY)
-#define G_BCM1480_MC_PG_POLICY(x)           _SB_GETVALUE(x, S_BCM1480_MC_PG_POLICY, M_BCM1480_MC_PG_POLICY)
+#define S_BCM1480_MC_PG_POLICY		    40
+#define M_BCM1480_MC_PG_POLICY		    _SB_MAKEMASK(2, S_BCM1480_MC_PG_POLICY)
+#define V_BCM1480_MC_PG_POLICY(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_PG_POLICY)
+#define G_BCM1480_MC_PG_POLICY(x)	    _SB_GETVALUE(x, S_BCM1480_MC_PG_POLICY, M_BCM1480_MC_PG_POLICY)
 
-#define K_BCM1480_MC_PG_POLICY_CLOSED       0
+#define K_BCM1480_MC_PG_POLICY_CLOSED	    0
 #define K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK 1
 
-#define V_BCM1480_MC_PG_POLICY_CLOSED       V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CLOSED)
+#define V_BCM1480_MC_PG_POLICY_CLOSED	    V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CLOSED)
 #define V_BCM1480_MC_PG_POLICY_CAS_TIME_CHK V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
@@ -447,32 +447,32 @@
 #endif
 
 #define V_BCM1480_MC_DRAMMODE_DEFAULT	V_BCM1480_MC_EMODE_DEFAULT | V_BCM1480_MC_MODE_DEFAULT | V_BCM1480_MC_DRAM_TYPE_JEDEC | \
-                                V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
+				V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
 
 /*
  * Memory Clock Configuration Register (Table 92)
  */
 
-#define S_BCM1480_MC_CLK_RATIO              0
-#define M_BCM1480_MC_CLK_RATIO              _SB_MAKEMASK(6, S_BCM1480_MC_CLK_RATIO)
-#define V_BCM1480_MC_CLK_RATIO(x)           _SB_MAKEVALUE(x, S_BCM1480_MC_CLK_RATIO)
-#define G_BCM1480_MC_CLK_RATIO(x)           _SB_GETVALUE(x, S_BCM1480_MC_CLK_RATIO, M_BCM1480_MC_CLK_RATIO)
+#define S_BCM1480_MC_CLK_RATIO		    0
+#define M_BCM1480_MC_CLK_RATIO		    _SB_MAKEMASK(6, S_BCM1480_MC_CLK_RATIO)
+#define V_BCM1480_MC_CLK_RATIO(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_CLK_RATIO)
+#define G_BCM1480_MC_CLK_RATIO(x)	    _SB_GETVALUE(x, S_BCM1480_MC_CLK_RATIO, M_BCM1480_MC_CLK_RATIO)
 
-#define V_BCM1480_MC_CLK_RATIO_DEFAULT      V_BCM1480_MC_CLK_RATIO(10)
+#define V_BCM1480_MC_CLK_RATIO_DEFAULT	    V_BCM1480_MC_CLK_RATIO(10)
 
-#define S_BCM1480_MC_REF_RATE               8
-#define M_BCM1480_MC_REF_RATE               _SB_MAKEMASK(8, S_BCM1480_MC_REF_RATE)
-#define V_BCM1480_MC_REF_RATE(x)            _SB_MAKEVALUE(x, S_BCM1480_MC_REF_RATE)
-#define G_BCM1480_MC_REF_RATE(x)            _SB_GETVALUE(x, S_BCM1480_MC_REF_RATE, M_BCM1480_MC_REF_RATE)
+#define S_BCM1480_MC_REF_RATE		    8
+#define M_BCM1480_MC_REF_RATE		    _SB_MAKEMASK(8, S_BCM1480_MC_REF_RATE)
+#define V_BCM1480_MC_REF_RATE(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_REF_RATE)
+#define G_BCM1480_MC_REF_RATE(x)	    _SB_GETVALUE(x, S_BCM1480_MC_REF_RATE, M_BCM1480_MC_REF_RATE)
 
-#define K_BCM1480_MC_REF_RATE_100MHz        0x31
-#define K_BCM1480_MC_REF_RATE_200MHz        0x62
-#define K_BCM1480_MC_REF_RATE_400MHz        0xC4
+#define K_BCM1480_MC_REF_RATE_100MHz	    0x31
+#define K_BCM1480_MC_REF_RATE_200MHz	    0x62
+#define K_BCM1480_MC_REF_RATE_400MHz	    0xC4
 
-#define V_BCM1480_MC_REF_RATE_100MHz        V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_100MHz)
-#define V_BCM1480_MC_REF_RATE_200MHz        V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_200MHz)
-#define V_BCM1480_MC_REF_RATE_400MHz        V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_400MHz)
-#define V_BCM1480_MC_REF_RATE_DEFAULT       V_BCM1480_MC_REF_RATE_400MHz
+#define V_BCM1480_MC_REF_RATE_100MHz	    V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_100MHz)
+#define V_BCM1480_MC_REF_RATE_200MHz	    V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_200MHz)
+#define V_BCM1480_MC_REF_RATE_400MHz	    V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_400MHz)
+#define V_BCM1480_MC_REF_RATE_DEFAULT	    V_BCM1480_MC_REF_RATE_400MHz
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
 #define M_BCM1480_MC_AUTO_REF_DIS	    _SB_MAKEMASK1(16)
@@ -518,19 +518,19 @@
 
 #define M_BCM1480_MC_CS_ODD_ODT_EN	    _SB_MAKEMASK1(32)
 
-#define S_BCM1480_MC_ODT0	            0
+#define S_BCM1480_MC_ODT0		    0
 #define M_BCM1480_MC_ODT0		    _SB_MAKEMASK(8, S_BCM1480_MC_ODT0)
 #define V_BCM1480_MC_ODT0(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ODT0)
 
-#define S_BCM1480_MC_ODT2	            8
+#define S_BCM1480_MC_ODT2		    8
 #define M_BCM1480_MC_ODT2		    _SB_MAKEMASK(8, S_BCM1480_MC_ODT2)
 #define V_BCM1480_MC_ODT2(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ODT2)
 
-#define S_BCM1480_MC_ODT4	            16
+#define S_BCM1480_MC_ODT4		    16
 #define M_BCM1480_MC_ODT4		    _SB_MAKEMASK(8, S_BCM1480_MC_ODT4)
 #define V_BCM1480_MC_ODT4(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ODT4)
 
-#define S_BCM1480_MC_ODT6	            24
+#define S_BCM1480_MC_ODT6		    24
 #define M_BCM1480_MC_ODT6		    _SB_MAKEMASK(8, S_BCM1480_MC_ODT6)
 #define V_BCM1480_MC_ODT6(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_ODT6)
 #endif
@@ -539,139 +539,139 @@
  * Memory DLL Configuration Register (Table 93)
  */
 
-#define S_BCM1480_MC_ADDR_COARSE_ADJ         0
-#define M_BCM1480_MC_ADDR_COARSE_ADJ         _SB_MAKEMASK(6, S_BCM1480_MC_ADDR_COARSE_ADJ)
-#define V_BCM1480_MC_ADDR_COARSE_ADJ(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ)
-#define G_BCM1480_MC_ADDR_COARSE_ADJ(x)      _SB_GETVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ, M_BCM1480_MC_ADDR_COARSE_ADJ)
+#define S_BCM1480_MC_ADDR_COARSE_ADJ	     0
+#define M_BCM1480_MC_ADDR_COARSE_ADJ	     _SB_MAKEMASK(6, S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define V_BCM1480_MC_ADDR_COARSE_ADJ(x)	     _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define G_BCM1480_MC_ADDR_COARSE_ADJ(x)	     _SB_GETVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ, M_BCM1480_MC_ADDR_COARSE_ADJ)
 #define V_BCM1480_MC_ADDR_COARSE_ADJ_DEFAULT V_BCM1480_MC_ADDR_COARSE_ADJ(0x0)
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
-#define S_BCM1480_MC_ADDR_FREQ_RANGE	    	8
-#define M_BCM1480_MC_ADDR_FREQ_RANGE	    	_SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FREQ_RANGE)
-#define V_BCM1480_MC_ADDR_FREQ_RANGE(x)     	_SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE)
-#define G_BCM1480_MC_ADDR_FREQ_RANGE(x)     	_SB_GETVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE, M_BCM1480_MC_ADDR_FREQ_RANGE)
-#define V_BCM1480_MC_ADDR_FREQ_RANGE_DEFAULT 	V_BCM1480_MC_ADDR_FREQ_RANGE(0x4)
+#define S_BCM1480_MC_ADDR_FREQ_RANGE		8
+#define M_BCM1480_MC_ADDR_FREQ_RANGE		_SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE(x)		_SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define G_BCM1480_MC_ADDR_FREQ_RANGE(x)		_SB_GETVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE, M_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE_DEFAULT	V_BCM1480_MC_ADDR_FREQ_RANGE(0x4)
 #endif
 
-#define S_BCM1480_MC_ADDR_FINE_ADJ          8
-#define M_BCM1480_MC_ADDR_FINE_ADJ          _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FINE_ADJ)
-#define V_BCM1480_MC_ADDR_FINE_ADJ(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ)
-#define G_BCM1480_MC_ADDR_FINE_ADJ(x)       _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ, M_BCM1480_MC_ADDR_FINE_ADJ)
+#define S_BCM1480_MC_ADDR_FINE_ADJ	    8
+#define M_BCM1480_MC_ADDR_FINE_ADJ	    _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FINE_ADJ)
+#define V_BCM1480_MC_ADDR_FINE_ADJ(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ)
+#define G_BCM1480_MC_ADDR_FINE_ADJ(x)	    _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ, M_BCM1480_MC_ADDR_FINE_ADJ)
 #define V_BCM1480_MC_ADDR_FINE_ADJ_DEFAULT  V_BCM1480_MC_ADDR_FINE_ADJ(0x8)
 
-#define S_BCM1480_MC_DQI_COARSE_ADJ         16
-#define M_BCM1480_MC_DQI_COARSE_ADJ         _SB_MAKEMASK(6, S_BCM1480_MC_DQI_COARSE_ADJ)
-#define V_BCM1480_MC_DQI_COARSE_ADJ(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ)
-#define G_BCM1480_MC_DQI_COARSE_ADJ(x)      _SB_GETVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ, M_BCM1480_MC_DQI_COARSE_ADJ)
+#define S_BCM1480_MC_DQI_COARSE_ADJ	    16
+#define M_BCM1480_MC_DQI_COARSE_ADJ	    _SB_MAKEMASK(6, S_BCM1480_MC_DQI_COARSE_ADJ)
+#define V_BCM1480_MC_DQI_COARSE_ADJ(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ)
+#define G_BCM1480_MC_DQI_COARSE_ADJ(x)	    _SB_GETVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ, M_BCM1480_MC_DQI_COARSE_ADJ)
 #define V_BCM1480_MC_DQI_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQI_COARSE_ADJ(0x0)
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
-#define S_BCM1480_MC_DQI_FREQ_RANGE	    	24
-#define M_BCM1480_MC_DQI_FREQ_RANGE	    	_SB_MAKEMASK(4, S_BCM1480_MC_DQI_FREQ_RANGE)
-#define V_BCM1480_MC_DQI_FREQ_RANGE(x)     	_SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE)
-#define G_BCM1480_MC_DQI_FREQ_RANGE(x)     	_SB_GETVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE, M_BCM1480_MC_DQI_FREQ_RANGE)
-#define V_BCM1480_MC_DQI_FREQ_RANGE_DEFAULT 	V_BCM1480_MC_DQI_FREQ_RANGE(0x4)
+#define S_BCM1480_MC_DQI_FREQ_RANGE		24
+#define M_BCM1480_MC_DQI_FREQ_RANGE		_SB_MAKEMASK(4, S_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE(x)		_SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE)
+#define G_BCM1480_MC_DQI_FREQ_RANGE(x)		_SB_GETVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE, M_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE_DEFAULT	V_BCM1480_MC_DQI_FREQ_RANGE(0x4)
 #endif
 
-#define S_BCM1480_MC_DQI_FINE_ADJ           24
-#define M_BCM1480_MC_DQI_FINE_ADJ           _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FINE_ADJ)
-#define V_BCM1480_MC_DQI_FINE_ADJ(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ)
-#define G_BCM1480_MC_DQI_FINE_ADJ(x)        _SB_GETVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ, M_BCM1480_MC_DQI_FINE_ADJ)
+#define S_BCM1480_MC_DQI_FINE_ADJ	    24
+#define M_BCM1480_MC_DQI_FINE_ADJ	    _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FINE_ADJ)
+#define V_BCM1480_MC_DQI_FINE_ADJ(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ)
+#define G_BCM1480_MC_DQI_FINE_ADJ(x)	    _SB_GETVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ, M_BCM1480_MC_DQI_FINE_ADJ)
 #define V_BCM1480_MC_DQI_FINE_ADJ_DEFAULT   V_BCM1480_MC_DQI_FINE_ADJ(0x8)
 
-#define S_BCM1480_MC_DQO_COARSE_ADJ         32
-#define M_BCM1480_MC_DQO_COARSE_ADJ         _SB_MAKEMASK(6, S_BCM1480_MC_DQO_COARSE_ADJ)
-#define V_BCM1480_MC_DQO_COARSE_ADJ(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ)
-#define G_BCM1480_MC_DQO_COARSE_ADJ(x)      _SB_GETVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ, M_BCM1480_MC_DQO_COARSE_ADJ)
+#define S_BCM1480_MC_DQO_COARSE_ADJ	    32
+#define M_BCM1480_MC_DQO_COARSE_ADJ	    _SB_MAKEMASK(6, S_BCM1480_MC_DQO_COARSE_ADJ)
+#define V_BCM1480_MC_DQO_COARSE_ADJ(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ)
+#define G_BCM1480_MC_DQO_COARSE_ADJ(x)	    _SB_GETVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ, M_BCM1480_MC_DQO_COARSE_ADJ)
 #define V_BCM1480_MC_DQO_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQO_COARSE_ADJ(0x0)
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
-#define S_BCM1480_MC_DQO_FREQ_RANGE	    	40
-#define M_BCM1480_MC_DQO_FREQ_RANGE	    	_SB_MAKEMASK(4, S_BCM1480_MC_DQO_FREQ_RANGE)
-#define V_BCM1480_MC_DQO_FREQ_RANGE(x)     	_SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE)
-#define G_BCM1480_MC_DQO_FREQ_RANGE(x)     	_SB_GETVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE, M_BCM1480_MC_DQO_FREQ_RANGE)
-#define V_BCM1480_MC_DQO_FREQ_RANGE_DEFAULT 	V_BCM1480_MC_DQO_FREQ_RANGE(0x4)
+#define S_BCM1480_MC_DQO_FREQ_RANGE		40
+#define M_BCM1480_MC_DQO_FREQ_RANGE		_SB_MAKEMASK(4, S_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE(x)		_SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE)
+#define G_BCM1480_MC_DQO_FREQ_RANGE(x)		_SB_GETVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE, M_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE_DEFAULT	V_BCM1480_MC_DQO_FREQ_RANGE(0x4)
 #endif
 
-#define S_BCM1480_MC_DQO_FINE_ADJ           40
-#define M_BCM1480_MC_DQO_FINE_ADJ           _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FINE_ADJ)
-#define V_BCM1480_MC_DQO_FINE_ADJ(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ)
-#define G_BCM1480_MC_DQO_FINE_ADJ(x)        _SB_GETVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ, M_BCM1480_MC_DQO_FINE_ADJ)
+#define S_BCM1480_MC_DQO_FINE_ADJ	    40
+#define M_BCM1480_MC_DQO_FINE_ADJ	    _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FINE_ADJ)
+#define V_BCM1480_MC_DQO_FINE_ADJ(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ)
+#define G_BCM1480_MC_DQO_FINE_ADJ(x)	    _SB_GETVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ, M_BCM1480_MC_DQO_FINE_ADJ)
 #define V_BCM1480_MC_DQO_FINE_ADJ_DEFAULT   V_BCM1480_MC_DQO_FINE_ADJ(0x8)
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
-#define S_BCM1480_MC_DLL_PDSEL            44
-#define M_BCM1480_MC_DLL_PDSEL            _SB_MAKEMASK(2, S_BCM1480_MC_DLL_PDSEL)
-#define V_BCM1480_MC_DLL_PDSEL(x)         _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_PDSEL)
-#define G_BCM1480_MC_DLL_PDSEL(x)         _SB_GETVALUE(x, S_BCM1480_MC_DLL_PDSEL, M_BCM1480_MC_DLL_PDSEL)
-#define V_BCM1480_MC_DLL_DEFAULT_PDSEL    V_BCM1480_MC_DLL_PDSEL(0x0)
+#define S_BCM1480_MC_DLL_PDSEL		  44
+#define M_BCM1480_MC_DLL_PDSEL		  _SB_MAKEMASK(2, S_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_PDSEL(x)	  _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_PDSEL)
+#define G_BCM1480_MC_DLL_PDSEL(x)	  _SB_GETVALUE(x, S_BCM1480_MC_DLL_PDSEL, M_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_DEFAULT_PDSEL	  V_BCM1480_MC_DLL_PDSEL(0x0)
 
-#define	M_BCM1480_MC_DLL_REGBYPASS        _SB_MAKEMASK1(46)
-#define	M_BCM1480_MC_DQO_SHIFT            _SB_MAKEMASK1(47)
+#define M_BCM1480_MC_DLL_REGBYPASS	  _SB_MAKEMASK1(46)
+#define M_BCM1480_MC_DQO_SHIFT		  _SB_MAKEMASK1(47)
 #endif
 
-#define S_BCM1480_MC_DLL_DEFAULT           48
-#define M_BCM1480_MC_DLL_DEFAULT           _SB_MAKEMASK(6, S_BCM1480_MC_DLL_DEFAULT)
-#define V_BCM1480_MC_DLL_DEFAULT(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_DEFAULT)
-#define G_BCM1480_MC_DLL_DEFAULT(x)        _SB_GETVALUE(x, S_BCM1480_MC_DLL_DEFAULT, M_BCM1480_MC_DLL_DEFAULT)
+#define S_BCM1480_MC_DLL_DEFAULT	   48
+#define M_BCM1480_MC_DLL_DEFAULT	   _SB_MAKEMASK(6, S_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT(x)	   _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_DEFAULT)
+#define G_BCM1480_MC_DLL_DEFAULT(x)	   _SB_GETVALUE(x, S_BCM1480_MC_DLL_DEFAULT, M_BCM1480_MC_DLL_DEFAULT)
 #define V_BCM1480_MC_DLL_DEFAULT_DEFAULT   V_BCM1480_MC_DLL_DEFAULT(0x10)
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
 #define S_BCM1480_MC_DLL_REGCTRL	  54
-#define M_BCM1480_MC_DLL_REGCTRL       	  _SB_MAKEMASK(2, S_BCM1480_MC_DLL_REGCTRL)
-#define V_BCM1480_MC_DLL_REGCTRL(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_REGCTRL)
-#define G_BCM1480_MC_DLL_REGCTRL(x)       _SB_GETVALUE(x, S_BCM1480_MC_DLL_REGCTRL, M_BCM1480_MC_DLL_REGCTRL)
+#define M_BCM1480_MC_DLL_REGCTRL	  _SB_MAKEMASK(2, S_BCM1480_MC_DLL_REGCTRL)
+#define V_BCM1480_MC_DLL_REGCTRL(x)	  _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_REGCTRL)
+#define G_BCM1480_MC_DLL_REGCTRL(x)	  _SB_GETVALUE(x, S_BCM1480_MC_DLL_REGCTRL, M_BCM1480_MC_DLL_REGCTRL)
 #define V_BCM1480_MC_DLL_DEFAULT_REGCTRL  V_BCM1480_MC_DLL_REGCTRL(0x0)
 #endif
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
-#define S_BCM1480_MC_DLL_FREQ_RANGE	    	56
-#define M_BCM1480_MC_DLL_FREQ_RANGE	    	_SB_MAKEMASK(4, S_BCM1480_MC_DLL_FREQ_RANGE)
-#define V_BCM1480_MC_DLL_FREQ_RANGE(x)     	_SB_MAKEVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE)
-#define G_BCM1480_MC_DLL_FREQ_RANGE(x)     	_SB_GETVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE, M_BCM1480_MC_DLL_FREQ_RANGE)
-#define V_BCM1480_MC_DLL_FREQ_RANGE_DEFAULT 	V_BCM1480_MC_DLL_FREQ_RANGE(0x4)
+#define S_BCM1480_MC_DLL_FREQ_RANGE		56
+#define M_BCM1480_MC_DLL_FREQ_RANGE		_SB_MAKEMASK(4, S_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE(x)		_SB_MAKEVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE)
+#define G_BCM1480_MC_DLL_FREQ_RANGE(x)		_SB_GETVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE, M_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE_DEFAULT	V_BCM1480_MC_DLL_FREQ_RANGE(0x4)
 #endif
 
-#define S_BCM1480_MC_DLL_STEP_SIZE          56
-#define M_BCM1480_MC_DLL_STEP_SIZE          _SB_MAKEMASK(4, S_BCM1480_MC_DLL_STEP_SIZE)
-#define V_BCM1480_MC_DLL_STEP_SIZE(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE)
-#define G_BCM1480_MC_DLL_STEP_SIZE(x)       _SB_GETVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE, M_BCM1480_MC_DLL_STEP_SIZE)
+#define S_BCM1480_MC_DLL_STEP_SIZE	    56
+#define M_BCM1480_MC_DLL_STEP_SIZE	    _SB_MAKEMASK(4, S_BCM1480_MC_DLL_STEP_SIZE)
+#define V_BCM1480_MC_DLL_STEP_SIZE(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE)
+#define G_BCM1480_MC_DLL_STEP_SIZE(x)	    _SB_GETVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE, M_BCM1480_MC_DLL_STEP_SIZE)
 #define V_BCM1480_MC_DLL_STEP_SIZE_DEFAULT  V_BCM1480_MC_DLL_STEP_SIZE(0x8)
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
 #define S_BCM1480_MC_DLL_BGCTRL	  60
-#define M_BCM1480_MC_DLL_BGCTRL       	  _SB_MAKEMASK(2, S_BCM1480_MC_DLL_BGCTRL)
-#define V_BCM1480_MC_DLL_BGCTRL(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_BGCTRL)
-#define G_BCM1480_MC_DLL_BGCTRL(x)       _SB_GETVALUE(x, S_BCM1480_MC_DLL_BGCTRL, M_BCM1480_MC_DLL_BGCTRL)
-#define V_BCM1480_MC_DLL_DEFAULT_BGCTRL  V_BCM1480_MC_DLL_BGCTRL(0x0)
+#define M_BCM1480_MC_DLL_BGCTRL		  _SB_MAKEMASK(2, S_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_BGCTRL(x)	 _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_BGCTRL)
+#define G_BCM1480_MC_DLL_BGCTRL(x)	 _SB_GETVALUE(x, S_BCM1480_MC_DLL_BGCTRL, M_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_DEFAULT_BGCTRL	 V_BCM1480_MC_DLL_BGCTRL(0x0)
 #endif
 
-#define	M_BCM1480_MC_DLL_BYPASS		    _SB_MAKEMASK1(63)
+#define M_BCM1480_MC_DLL_BYPASS		    _SB_MAKEMASK1(63)
 
 /*
  * Memory Drive Configuration Register (Table 94)
  */
 
-#define S_BCM1480_MC_RTT_BYP_PULLDOWN       0
-#define M_BCM1480_MC_RTT_BYP_PULLDOWN       _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLDOWN)
+#define S_BCM1480_MC_RTT_BYP_PULLDOWN	    0
+#define M_BCM1480_MC_RTT_BYP_PULLDOWN	    _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLDOWN)
 #define V_BCM1480_MC_RTT_BYP_PULLDOWN(x)    _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN)
 #define G_BCM1480_MC_RTT_BYP_PULLDOWN(x)    _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN, M_BCM1480_MC_RTT_BYP_PULLDOWN)
 
-#define S_BCM1480_MC_RTT_BYP_PULLUP         6
-#define M_BCM1480_MC_RTT_BYP_PULLUP         _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLUP)
-#define V_BCM1480_MC_RTT_BYP_PULLUP(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP)
-#define G_BCM1480_MC_RTT_BYP_PULLUP(x)      _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP, M_BCM1480_MC_RTT_BYP_PULLUP)
+#define S_BCM1480_MC_RTT_BYP_PULLUP	    6
+#define M_BCM1480_MC_RTT_BYP_PULLUP	    _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLUP)
+#define V_BCM1480_MC_RTT_BYP_PULLUP(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP)
+#define G_BCM1480_MC_RTT_BYP_PULLUP(x)	    _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP, M_BCM1480_MC_RTT_BYP_PULLUP)
 
-#define M_BCM1480_MC_RTT_BYPASS             _SB_MAKEMASK1(8)
-#define M_BCM1480_MC_RTT_COMP_MOV_AVG       _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_RTT_BYPASS		    _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_RTT_COMP_MOV_AVG	    _SB_MAKEMASK1(9)
 
 #define S_BCM1480_MC_PVT_BYP_C1_PULLDOWN    10
 #define M_BCM1480_MC_PVT_BYP_C1_PULLDOWN    _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
 #define V_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
 #define G_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN, M_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
 
-#define S_BCM1480_MC_PVT_BYP_C1_PULLUP      15
-#define M_BCM1480_MC_PVT_BYP_C1_PULLUP      _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLUP)
+#define S_BCM1480_MC_PVT_BYP_C1_PULLUP	    15
+#define M_BCM1480_MC_PVT_BYP_C1_PULLUP	    _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLUP)
 #define V_BCM1480_MC_PVT_BYP_C1_PULLUP(x)   _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP)
 #define G_BCM1480_MC_PVT_BYP_C1_PULLUP(x)   _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP, M_BCM1480_MC_PVT_BYP_C1_PULLUP)
 
@@ -680,153 +680,153 @@
 #define V_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
 #define G_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN, M_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
 
-#define S_BCM1480_MC_PVT_BYP_C2_PULLUP      25
-#define M_BCM1480_MC_PVT_BYP_C2_PULLUP      _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLUP)
+#define S_BCM1480_MC_PVT_BYP_C2_PULLUP	    25
+#define M_BCM1480_MC_PVT_BYP_C2_PULLUP	    _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLUP)
 #define V_BCM1480_MC_PVT_BYP_C2_PULLUP(x)   _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP)
 #define G_BCM1480_MC_PVT_BYP_C2_PULLUP(x)   _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP, M_BCM1480_MC_PVT_BYP_C2_PULLUP)
 
-#define M_BCM1480_MC_PVT_BYPASS             _SB_MAKEMASK1(30)
-#define M_BCM1480_MC_PVT_COMP_MOV_AVG       _SB_MAKEMASK1(31)
+#define M_BCM1480_MC_PVT_BYPASS		    _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_PVT_COMP_MOV_AVG	    _SB_MAKEMASK1(31)
 
-#define M_BCM1480_MC_CLK_CLASS              _SB_MAKEMASK1(34)
-#define M_BCM1480_MC_DATA_CLASS             _SB_MAKEMASK1(35)
-#define M_BCM1480_MC_ADDR_CLASS             _SB_MAKEMASK1(36)
+#define M_BCM1480_MC_CLK_CLASS		    _SB_MAKEMASK1(34)
+#define M_BCM1480_MC_DATA_CLASS		    _SB_MAKEMASK1(35)
+#define M_BCM1480_MC_ADDR_CLASS		    _SB_MAKEMASK1(36)
 
-#define M_BCM1480_MC_DQ_ODT_75              _SB_MAKEMASK1(37)
-#define M_BCM1480_MC_DQ_ODT_150             _SB_MAKEMASK1(38)
-#define M_BCM1480_MC_DQS_ODT_75             _SB_MAKEMASK1(39)
-#define M_BCM1480_MC_DQS_ODT_150            _SB_MAKEMASK1(40)
-#define M_BCM1480_MC_DQS_DIFF               _SB_MAKEMASK1(41)
+#define M_BCM1480_MC_DQ_ODT_75		    _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_DQ_ODT_150		    _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_DQS_ODT_75		    _SB_MAKEMASK1(39)
+#define M_BCM1480_MC_DQS_ODT_150	    _SB_MAKEMASK1(40)
+#define M_BCM1480_MC_DQS_DIFF		    _SB_MAKEMASK1(41)
 
 /*
  * ECC Test Data Register (Table 95)
  */
 
-#define S_BCM1480_MC_DATA_INVERT            0
-#define M_DATA_ECC_INVERT           _SB_MAKEMASK(64, S_BCM1480_MC_ECC_INVERT)
+#define S_BCM1480_MC_DATA_INVERT	    0
+#define M_DATA_ECC_INVERT	    _SB_MAKEMASK(64, S_BCM1480_MC_ECC_INVERT)
 
 /*
  * ECC Test ECC Register (Table 96)
  */
 
-#define S_BCM1480_MC_ECC_INVERT             0
-#define M_BCM1480_MC_ECC_INVERT             _SB_MAKEMASK(8, S_BCM1480_MC_ECC_INVERT)
+#define S_BCM1480_MC_ECC_INVERT		    0
+#define M_BCM1480_MC_ECC_INVERT		    _SB_MAKEMASK(8, S_BCM1480_MC_ECC_INVERT)
 
 /*
  * SDRAM Timing Register  (Table 97)
  */
 
-#define S_BCM1480_MC_tRCD                   0
-#define M_BCM1480_MC_tRCD                   _SB_MAKEMASK(4, S_BCM1480_MC_tRCD)
-#define V_BCM1480_MC_tRCD(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRCD)
-#define G_BCM1480_MC_tRCD(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRCD, M_BCM1480_MC_tRCD)
-#define K_BCM1480_MC_tRCD_DEFAULT           3
-#define V_BCM1480_MC_tRCD_DEFAULT           V_BCM1480_MC_tRCD(K_BCM1480_MC_tRCD_DEFAULT)
+#define S_BCM1480_MC_tRCD		    0
+#define M_BCM1480_MC_tRCD		    _SB_MAKEMASK(4, S_BCM1480_MC_tRCD)
+#define V_BCM1480_MC_tRCD(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tRCD)
+#define G_BCM1480_MC_tRCD(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tRCD, M_BCM1480_MC_tRCD)
+#define K_BCM1480_MC_tRCD_DEFAULT	    3
+#define V_BCM1480_MC_tRCD_DEFAULT	    V_BCM1480_MC_tRCD(K_BCM1480_MC_tRCD_DEFAULT)
 
-#define S_BCM1480_MC_tCL                    4
-#define M_BCM1480_MC_tCL                    _SB_MAKEMASK(4, S_BCM1480_MC_tCL)
-#define V_BCM1480_MC_tCL(x)                 _SB_MAKEVALUE(x, S_BCM1480_MC_tCL)
-#define G_BCM1480_MC_tCL(x)                 _SB_GETVALUE(x, S_BCM1480_MC_tCL, M_BCM1480_MC_tCL)
-#define K_BCM1480_MC_tCL_DEFAULT            2
-#define V_BCM1480_MC_tCL_DEFAULT            V_BCM1480_MC_tCL(K_BCM1480_MC_tCL_DEFAULT)
+#define S_BCM1480_MC_tCL		    4
+#define M_BCM1480_MC_tCL		    _SB_MAKEMASK(4, S_BCM1480_MC_tCL)
+#define V_BCM1480_MC_tCL(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tCL)
+#define G_BCM1480_MC_tCL(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tCL, M_BCM1480_MC_tCL)
+#define K_BCM1480_MC_tCL_DEFAULT	    2
+#define V_BCM1480_MC_tCL_DEFAULT	    V_BCM1480_MC_tCL(K_BCM1480_MC_tCL_DEFAULT)
 
-#define M_BCM1480_MC_tCrDh                  _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_tCrDh		    _SB_MAKEMASK1(8)
 
-#define S_BCM1480_MC_tWR                    9
-#define M_BCM1480_MC_tWR                    _SB_MAKEMASK(3, S_BCM1480_MC_tWR)
-#define V_BCM1480_MC_tWR(x)                 _SB_MAKEVALUE(x, S_BCM1480_MC_tWR)
-#define G_BCM1480_MC_tWR(x)                 _SB_GETVALUE(x, S_BCM1480_MC_tWR, M_BCM1480_MC_tWR)
-#define K_BCM1480_MC_tWR_DEFAULT            2
-#define V_BCM1480_MC_tWR_DEFAULT            V_BCM1480_MC_tWR(K_BCM1480_MC_tWR_DEFAULT)
+#define S_BCM1480_MC_tWR		    9
+#define M_BCM1480_MC_tWR		    _SB_MAKEMASK(3, S_BCM1480_MC_tWR)
+#define V_BCM1480_MC_tWR(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tWR)
+#define G_BCM1480_MC_tWR(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tWR, M_BCM1480_MC_tWR)
+#define K_BCM1480_MC_tWR_DEFAULT	    2
+#define V_BCM1480_MC_tWR_DEFAULT	    V_BCM1480_MC_tWR(K_BCM1480_MC_tWR_DEFAULT)
 
-#define S_BCM1480_MC_tCwD                   12
-#define M_BCM1480_MC_tCwD                   _SB_MAKEMASK(4, S_BCM1480_MC_tCwD)
-#define V_BCM1480_MC_tCwD(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tCwD)
-#define G_BCM1480_MC_tCwD(x)                _SB_GETVALUE(x, S_BCM1480_MC_tCwD, M_BCM1480_MC_tCwD)
-#define K_BCM1480_MC_tCwD_DEFAULT           1
-#define V_BCM1480_MC_tCwD_DEFAULT           V_BCM1480_MC_tCwD(K_BCM1480_MC_tCwD_DEFAULT)
+#define S_BCM1480_MC_tCwD		    12
+#define M_BCM1480_MC_tCwD		    _SB_MAKEMASK(4, S_BCM1480_MC_tCwD)
+#define V_BCM1480_MC_tCwD(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tCwD)
+#define G_BCM1480_MC_tCwD(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tCwD, M_BCM1480_MC_tCwD)
+#define K_BCM1480_MC_tCwD_DEFAULT	    1
+#define V_BCM1480_MC_tCwD_DEFAULT	    V_BCM1480_MC_tCwD(K_BCM1480_MC_tCwD_DEFAULT)
 
-#define S_BCM1480_MC_tRP                    16
-#define M_BCM1480_MC_tRP                    _SB_MAKEMASK(4, S_BCM1480_MC_tRP)
-#define V_BCM1480_MC_tRP(x)                 _SB_MAKEVALUE(x, S_BCM1480_MC_tRP)
-#define G_BCM1480_MC_tRP(x)                 _SB_GETVALUE(x, S_BCM1480_MC_tRP, M_BCM1480_MC_tRP)
-#define K_BCM1480_MC_tRP_DEFAULT            4
-#define V_BCM1480_MC_tRP_DEFAULT            V_BCM1480_MC_tRP(K_BCM1480_MC_tRP_DEFAULT)
+#define S_BCM1480_MC_tRP		    16
+#define M_BCM1480_MC_tRP		    _SB_MAKEMASK(4, S_BCM1480_MC_tRP)
+#define V_BCM1480_MC_tRP(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tRP)
+#define G_BCM1480_MC_tRP(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tRP, M_BCM1480_MC_tRP)
+#define K_BCM1480_MC_tRP_DEFAULT	    4
+#define V_BCM1480_MC_tRP_DEFAULT	    V_BCM1480_MC_tRP(K_BCM1480_MC_tRP_DEFAULT)
 
-#define S_BCM1480_MC_tRRD                   20
-#define M_BCM1480_MC_tRRD                   _SB_MAKEMASK(4, S_BCM1480_MC_tRRD)
-#define V_BCM1480_MC_tRRD(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRRD)
-#define G_BCM1480_MC_tRRD(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRRD, M_BCM1480_MC_tRRD)
-#define K_BCM1480_MC_tRRD_DEFAULT           2
-#define V_BCM1480_MC_tRRD_DEFAULT           V_BCM1480_MC_tRRD(K_BCM1480_MC_tRRD_DEFAULT)
+#define S_BCM1480_MC_tRRD		    20
+#define M_BCM1480_MC_tRRD		    _SB_MAKEMASK(4, S_BCM1480_MC_tRRD)
+#define V_BCM1480_MC_tRRD(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tRRD)
+#define G_BCM1480_MC_tRRD(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tRRD, M_BCM1480_MC_tRRD)
+#define K_BCM1480_MC_tRRD_DEFAULT	    2
+#define V_BCM1480_MC_tRRD_DEFAULT	    V_BCM1480_MC_tRRD(K_BCM1480_MC_tRRD_DEFAULT)
 
-#define S_BCM1480_MC_tRCw                   24
-#define M_BCM1480_MC_tRCw                   _SB_MAKEMASK(5, S_BCM1480_MC_tRCw)
-#define V_BCM1480_MC_tRCw(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRCw)
-#define G_BCM1480_MC_tRCw(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRCw, M_BCM1480_MC_tRCw)
-#define K_BCM1480_MC_tRCw_DEFAULT           10
-#define V_BCM1480_MC_tRCw_DEFAULT           V_BCM1480_MC_tRCw(K_BCM1480_MC_tRCw_DEFAULT)
+#define S_BCM1480_MC_tRCw		    24
+#define M_BCM1480_MC_tRCw		    _SB_MAKEMASK(5, S_BCM1480_MC_tRCw)
+#define V_BCM1480_MC_tRCw(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tRCw)
+#define G_BCM1480_MC_tRCw(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tRCw, M_BCM1480_MC_tRCw)
+#define K_BCM1480_MC_tRCw_DEFAULT	    10
+#define V_BCM1480_MC_tRCw_DEFAULT	    V_BCM1480_MC_tRCw(K_BCM1480_MC_tRCw_DEFAULT)
 
-#define S_BCM1480_MC_tRCr                   32
-#define M_BCM1480_MC_tRCr                   _SB_MAKEMASK(5, S_BCM1480_MC_tRCr)
-#define V_BCM1480_MC_tRCr(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRCr)
-#define G_BCM1480_MC_tRCr(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRCr, M_BCM1480_MC_tRCr)
-#define K_BCM1480_MC_tRCr_DEFAULT           9
-#define V_BCM1480_MC_tRCr_DEFAULT           V_BCM1480_MC_tRCr(K_BCM1480_MC_tRCr_DEFAULT)
+#define S_BCM1480_MC_tRCr		    32
+#define M_BCM1480_MC_tRCr		    _SB_MAKEMASK(5, S_BCM1480_MC_tRCr)
+#define V_BCM1480_MC_tRCr(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tRCr)
+#define G_BCM1480_MC_tRCr(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tRCr, M_BCM1480_MC_tRCr)
+#define K_BCM1480_MC_tRCr_DEFAULT	    9
+#define V_BCM1480_MC_tRCr_DEFAULT	    V_BCM1480_MC_tRCr(K_BCM1480_MC_tRCr_DEFAULT)
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
-#define S_BCM1480_MC_tFAW                   40
-#define M_BCM1480_MC_tFAW                   _SB_MAKEMASK(6, S_BCM1480_MC_tFAW)
-#define V_BCM1480_MC_tFAW(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tFAW)
-#define G_BCM1480_MC_tFAW(x)                _SB_GETVALUE(x, S_BCM1480_MC_tFAW, M_BCM1480_MC_tFAW)
-#define K_BCM1480_MC_tFAW_DEFAULT           0
-#define V_BCM1480_MC_tFAW_DEFAULT           V_BCM1480_MC_tFAW(K_BCM1480_MC_tFAW_DEFAULT)
+#define S_BCM1480_MC_tFAW		    40
+#define M_BCM1480_MC_tFAW		    _SB_MAKEMASK(6, S_BCM1480_MC_tFAW)
+#define V_BCM1480_MC_tFAW(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tFAW)
+#define G_BCM1480_MC_tFAW(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tFAW, M_BCM1480_MC_tFAW)
+#define K_BCM1480_MC_tFAW_DEFAULT	    0
+#define V_BCM1480_MC_tFAW_DEFAULT	    V_BCM1480_MC_tFAW(K_BCM1480_MC_tFAW_DEFAULT)
 #endif
 
-#define S_BCM1480_MC_tRFC                   48
-#define M_BCM1480_MC_tRFC                   _SB_MAKEMASK(7, S_BCM1480_MC_tRFC)
-#define V_BCM1480_MC_tRFC(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRFC)
-#define G_BCM1480_MC_tRFC(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRFC, M_BCM1480_MC_tRFC)
-#define K_BCM1480_MC_tRFC_DEFAULT           12
-#define V_BCM1480_MC_tRFC_DEFAULT           V_BCM1480_MC_tRFC(K_BCM1480_MC_tRFC_DEFAULT)
+#define S_BCM1480_MC_tRFC		    48
+#define M_BCM1480_MC_tRFC		    _SB_MAKEMASK(7, S_BCM1480_MC_tRFC)
+#define V_BCM1480_MC_tRFC(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tRFC)
+#define G_BCM1480_MC_tRFC(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tRFC, M_BCM1480_MC_tRFC)
+#define K_BCM1480_MC_tRFC_DEFAULT	    12
+#define V_BCM1480_MC_tRFC_DEFAULT	    V_BCM1480_MC_tRFC(K_BCM1480_MC_tRFC_DEFAULT)
 
-#define S_BCM1480_MC_tFIFO                  56
-#define M_BCM1480_MC_tFIFO                  _SB_MAKEMASK(2, S_BCM1480_MC_tFIFO)
-#define V_BCM1480_MC_tFIFO(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_tFIFO)
-#define G_BCM1480_MC_tFIFO(x)               _SB_GETVALUE(x, S_BCM1480_MC_tFIFO, M_BCM1480_MC_tFIFO)
-#define K_BCM1480_MC_tFIFO_DEFAULT          0
-#define V_BCM1480_MC_tFIFO_DEFAULT          V_BCM1480_MC_tFIFO(K_BCM1480_MC_tFIFO_DEFAULT)
+#define S_BCM1480_MC_tFIFO		    56
+#define M_BCM1480_MC_tFIFO		    _SB_MAKEMASK(2, S_BCM1480_MC_tFIFO)
+#define V_BCM1480_MC_tFIFO(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tFIFO)
+#define G_BCM1480_MC_tFIFO(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tFIFO, M_BCM1480_MC_tFIFO)
+#define K_BCM1480_MC_tFIFO_DEFAULT	    0
+#define V_BCM1480_MC_tFIFO_DEFAULT	    V_BCM1480_MC_tFIFO(K_BCM1480_MC_tFIFO_DEFAULT)
 
-#define S_BCM1480_MC_tW2R                  58
-#define M_BCM1480_MC_tW2R                  _SB_MAKEMASK(2, S_BCM1480_MC_tW2R)
-#define V_BCM1480_MC_tW2R(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_tW2R)
-#define G_BCM1480_MC_tW2R(x)               _SB_GETVALUE(x, S_BCM1480_MC_tW2R, M_BCM1480_MC_tW2R)
-#define K_BCM1480_MC_tW2R_DEFAULT          1
-#define V_BCM1480_MC_tW2R_DEFAULT          V_BCM1480_MC_tW2R(K_BCM1480_MC_tW2R_DEFAULT)
+#define S_BCM1480_MC_tW2R		   58
+#define M_BCM1480_MC_tW2R		   _SB_MAKEMASK(2, S_BCM1480_MC_tW2R)
+#define V_BCM1480_MC_tW2R(x)		   _SB_MAKEVALUE(x, S_BCM1480_MC_tW2R)
+#define G_BCM1480_MC_tW2R(x)		   _SB_GETVALUE(x, S_BCM1480_MC_tW2R, M_BCM1480_MC_tW2R)
+#define K_BCM1480_MC_tW2R_DEFAULT	   1
+#define V_BCM1480_MC_tW2R_DEFAULT	   V_BCM1480_MC_tW2R(K_BCM1480_MC_tW2R_DEFAULT)
 
-#define S_BCM1480_MC_tR2W                  60
-#define M_BCM1480_MC_tR2W                  _SB_MAKEMASK(2, S_BCM1480_MC_tR2W)
-#define V_BCM1480_MC_tR2W(x)               _SB_MAKEVALUE(x, S_BCM1480_MC_tR2W)
-#define G_BCM1480_MC_tR2W(x)               _SB_GETVALUE(x, S_BCM1480_MC_tR2W, M_BCM1480_MC_tR2W)
-#define K_BCM1480_MC_tR2W_DEFAULT          0
-#define V_BCM1480_MC_tR2W_DEFAULT          V_BCM1480_MC_tR2W(K_BCM1480_MC_tR2W_DEFAULT)
+#define S_BCM1480_MC_tR2W		   60
+#define M_BCM1480_MC_tR2W		   _SB_MAKEMASK(2, S_BCM1480_MC_tR2W)
+#define V_BCM1480_MC_tR2W(x)		   _SB_MAKEVALUE(x, S_BCM1480_MC_tR2W)
+#define G_BCM1480_MC_tR2W(x)		   _SB_GETVALUE(x, S_BCM1480_MC_tR2W, M_BCM1480_MC_tR2W)
+#define K_BCM1480_MC_tR2W_DEFAULT	   0
+#define V_BCM1480_MC_tR2W_DEFAULT	   V_BCM1480_MC_tR2W(K_BCM1480_MC_tR2W_DEFAULT)
 
 #define M_BCM1480_MC_tR2R		    _SB_MAKEMASK1(62)
 
-#define V_BCM1480_MC_TIMING_DEFAULT         (M_BCM1480_MC_tR2R | \
-                                     V_BCM1480_MC_tFIFO_DEFAULT | \
-                                     V_BCM1480_MC_tR2W_DEFAULT | \
-                                     V_BCM1480_MC_tW2R_DEFAULT | \
-                                     V_BCM1480_MC_tRFC_DEFAULT | \
-                                     V_BCM1480_MC_tRCr_DEFAULT | \
-                                     V_BCM1480_MC_tRCw_DEFAULT | \
-                                     V_BCM1480_MC_tRRD_DEFAULT | \
-                                     V_BCM1480_MC_tRP_DEFAULT | \
-                                     V_BCM1480_MC_tCwD_DEFAULT | \
-                                     V_BCM1480_MC_tWR_DEFAULT | \
-                                     M_BCM1480_MC_tCrDh | \
-                                     V_BCM1480_MC_tCL_DEFAULT | \
-                                     V_BCM1480_MC_tRCD_DEFAULT)
+#define V_BCM1480_MC_TIMING_DEFAULT	    (M_BCM1480_MC_tR2R | \
+				     V_BCM1480_MC_tFIFO_DEFAULT | \
+				     V_BCM1480_MC_tR2W_DEFAULT | \
+				     V_BCM1480_MC_tW2R_DEFAULT | \
+				     V_BCM1480_MC_tRFC_DEFAULT | \
+				     V_BCM1480_MC_tRCr_DEFAULT | \
+				     V_BCM1480_MC_tRCw_DEFAULT | \
+				     V_BCM1480_MC_tRRD_DEFAULT | \
+				     V_BCM1480_MC_tRP_DEFAULT | \
+				     V_BCM1480_MC_tCwD_DEFAULT | \
+				     V_BCM1480_MC_tWR_DEFAULT | \
+				     M_BCM1480_MC_tCrDh | \
+				     V_BCM1480_MC_tCL_DEFAULT | \
+				     V_BCM1480_MC_tRCD_DEFAULT)
 
 /*
  * SDRAM Timing Register 2
@@ -834,33 +834,33 @@
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
 
-#define S_BCM1480_MC_tAL                   0
-#define M_BCM1480_MC_tAL                   _SB_MAKEMASK(4, S_BCM1480_MC_tAL)
-#define V_BCM1480_MC_tAL(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tAL)
-#define G_BCM1480_MC_tAL(x)                _SB_GETVALUE(x, S_BCM1480_MC_tAL, M_BCM1480_MC_tAL)
-#define K_BCM1480_MC_tAL_DEFAULT           0
-#define V_BCM1480_MC_tAL_DEFAULT           V_BCM1480_MC_tAL(K_BCM1480_MC_tAL_DEFAULT)
+#define S_BCM1480_MC_tAL		   0
+#define M_BCM1480_MC_tAL		   _SB_MAKEMASK(4, S_BCM1480_MC_tAL)
+#define V_BCM1480_MC_tAL(x)		   _SB_MAKEVALUE(x, S_BCM1480_MC_tAL)
+#define G_BCM1480_MC_tAL(x)		   _SB_GETVALUE(x, S_BCM1480_MC_tAL, M_BCM1480_MC_tAL)
+#define K_BCM1480_MC_tAL_DEFAULT	   0
+#define V_BCM1480_MC_tAL_DEFAULT	   V_BCM1480_MC_tAL(K_BCM1480_MC_tAL_DEFAULT)
 
-#define S_BCM1480_MC_tRTP                   4
-#define M_BCM1480_MC_tRTP                   _SB_MAKEMASK(3, S_BCM1480_MC_tRTP)
-#define V_BCM1480_MC_tRTP(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRTP)
-#define G_BCM1480_MC_tRTP(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRTP, M_BCM1480_MC_tRTP)
-#define K_BCM1480_MC_tRTP_DEFAULT           2
-#define V_BCM1480_MC_tRTP_DEFAULT           V_BCM1480_MC_tRTP(K_BCM1480_MC_tRTP_DEFAULT)
+#define S_BCM1480_MC_tRTP		    4
+#define M_BCM1480_MC_tRTP		    _SB_MAKEMASK(3, S_BCM1480_MC_tRTP)
+#define V_BCM1480_MC_tRTP(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tRTP)
+#define G_BCM1480_MC_tRTP(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tRTP, M_BCM1480_MC_tRTP)
+#define K_BCM1480_MC_tRTP_DEFAULT	    2
+#define V_BCM1480_MC_tRTP_DEFAULT	    V_BCM1480_MC_tRTP(K_BCM1480_MC_tRTP_DEFAULT)
 
-#define S_BCM1480_MC_tW2W                   8
-#define M_BCM1480_MC_tW2W                   _SB_MAKEMASK(2, S_BCM1480_MC_tW2W)
-#define V_BCM1480_MC_tW2W(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tW2W)
-#define G_BCM1480_MC_tW2W(x)                _SB_GETVALUE(x, S_BCM1480_MC_tW2W, M_BCM1480_MC_tW2W)
-#define K_BCM1480_MC_tW2W_DEFAULT           0
-#define V_BCM1480_MC_tW2W_DEFAULT           V_BCM1480_MC_tW2W(K_BCM1480_MC_tW2W_DEFAULT)
+#define S_BCM1480_MC_tW2W		    8
+#define M_BCM1480_MC_tW2W		    _SB_MAKEMASK(2, S_BCM1480_MC_tW2W)
+#define V_BCM1480_MC_tW2W(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tW2W)
+#define G_BCM1480_MC_tW2W(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tW2W, M_BCM1480_MC_tW2W)
+#define K_BCM1480_MC_tW2W_DEFAULT	    0
+#define V_BCM1480_MC_tW2W_DEFAULT	    V_BCM1480_MC_tW2W(K_BCM1480_MC_tW2W_DEFAULT)
 
-#define S_BCM1480_MC_tRAP                   12
-#define M_BCM1480_MC_tRAP                  _SB_MAKEMASK(4, S_BCM1480_MC_tRAP)
-#define V_BCM1480_MC_tRAP(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_tRAP)
-#define G_BCM1480_MC_tRAP(x)                _SB_GETVALUE(x, S_BCM1480_MC_tRAP, M_BCM1480_MC_tRAP)
-#define K_BCM1480_MC_tRAP_DEFAULT           0
-#define V_BCM1480_MC_tRAP_DEFAULT           V_BCM1480_MC_tRAP(K_BCM1480_MC_tRAP_DEFAULT)
+#define S_BCM1480_MC_tRAP		    12
+#define M_BCM1480_MC_tRAP		   _SB_MAKEMASK(4, S_BCM1480_MC_tRAP)
+#define V_BCM1480_MC_tRAP(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_tRAP)
+#define G_BCM1480_MC_tRAP(x)		    _SB_GETVALUE(x, S_BCM1480_MC_tRAP, M_BCM1480_MC_tRAP)
+#define K_BCM1480_MC_tRAP_DEFAULT	    0
+#define V_BCM1480_MC_tRAP_DEFAULT	    V_BCM1480_MC_tRAP(K_BCM1480_MC_tRAP_DEFAULT)
 
 #endif
 
@@ -874,111 +874,111 @@
  * Global Configuration Register (Table 99)
  */
 
-#define S_BCM1480_MC_BLK_SET_MARK           8
-#define M_BCM1480_MC_BLK_SET_MARK           _SB_MAKEMASK(4, S_BCM1480_MC_BLK_SET_MARK)
-#define V_BCM1480_MC_BLK_SET_MARK(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_SET_MARK)
-#define G_BCM1480_MC_BLK_SET_MARK(x)        _SB_GETVALUE(x, S_BCM1480_MC_BLK_SET_MARK, M_BCM1480_MC_BLK_SET_MARK)
+#define S_BCM1480_MC_BLK_SET_MARK	    8
+#define M_BCM1480_MC_BLK_SET_MARK	    _SB_MAKEMASK(4, S_BCM1480_MC_BLK_SET_MARK)
+#define V_BCM1480_MC_BLK_SET_MARK(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_SET_MARK)
+#define G_BCM1480_MC_BLK_SET_MARK(x)	    _SB_GETVALUE(x, S_BCM1480_MC_BLK_SET_MARK, M_BCM1480_MC_BLK_SET_MARK)
 
-#define S_BCM1480_MC_BLK_CLR_MARK           12
-#define M_BCM1480_MC_BLK_CLR_MARK           _SB_MAKEMASK(4, S_BCM1480_MC_BLK_CLR_MARK)
-#define V_BCM1480_MC_BLK_CLR_MARK(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_CLR_MARK)
-#define G_BCM1480_MC_BLK_CLR_MARK(x)        _SB_GETVALUE(x, S_BCM1480_MC_BLK_CLR_MARK, M_BCM1480_MC_BLK_CLR_MARK)
+#define S_BCM1480_MC_BLK_CLR_MARK	    12
+#define M_BCM1480_MC_BLK_CLR_MARK	    _SB_MAKEMASK(4, S_BCM1480_MC_BLK_CLR_MARK)
+#define V_BCM1480_MC_BLK_CLR_MARK(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_CLR_MARK)
+#define G_BCM1480_MC_BLK_CLR_MARK(x)	    _SB_GETVALUE(x, S_BCM1480_MC_BLK_CLR_MARK, M_BCM1480_MC_BLK_CLR_MARK)
 
-#define M_BCM1480_MC_PKT_PRIORITY           _SB_MAKEMASK1(16)
+#define M_BCM1480_MC_PKT_PRIORITY	    _SB_MAKEMASK1(16)
 
-#define S_BCM1480_MC_MAX_AGE                20
-#define M_BCM1480_MC_MAX_AGE                _SB_MAKEMASK(4, S_BCM1480_MC_MAX_AGE)
-#define V_BCM1480_MC_MAX_AGE(x)             _SB_MAKEVALUE(x, S_BCM1480_MC_MAX_AGE)
-#define G_BCM1480_MC_MAX_AGE(x)             _SB_GETVALUE(x, S_BCM1480_MC_MAX_AGE, M_BCM1480_MC_MAX_AGE)
+#define S_BCM1480_MC_MAX_AGE		    20
+#define M_BCM1480_MC_MAX_AGE		    _SB_MAKEMASK(4, S_BCM1480_MC_MAX_AGE)
+#define V_BCM1480_MC_MAX_AGE(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_MAX_AGE)
+#define G_BCM1480_MC_MAX_AGE(x)		    _SB_GETVALUE(x, S_BCM1480_MC_MAX_AGE, M_BCM1480_MC_MAX_AGE)
 
-#define M_BCM1480_MC_BERR_DISABLE           _SB_MAKEMASK1(29)
-#define M_BCM1480_MC_FORCE_SEQ              _SB_MAKEMASK1(30)
-#define M_BCM1480_MC_VGEN                   _SB_MAKEMASK1(32)
+#define M_BCM1480_MC_BERR_DISABLE	    _SB_MAKEMASK1(29)
+#define M_BCM1480_MC_FORCE_SEQ		    _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_VGEN		    _SB_MAKEMASK1(32)
 
-#define S_BCM1480_MC_SLEW                   33
-#define M_BCM1480_MC_SLEW                   _SB_MAKEMASK(2, S_BCM1480_MC_SLEW)
-#define V_BCM1480_MC_SLEW(x)                _SB_MAKEVALUE(x, S_BCM1480_MC_SLEW)
-#define G_BCM1480_MC_SLEW(x)                _SB_GETVALUE(x, S_BCM1480_MC_SLEW, M_BCM1480_MC_SLEW)
+#define S_BCM1480_MC_SLEW		    33
+#define M_BCM1480_MC_SLEW		    _SB_MAKEMASK(2, S_BCM1480_MC_SLEW)
+#define V_BCM1480_MC_SLEW(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_SLEW)
+#define G_BCM1480_MC_SLEW(x)		    _SB_GETVALUE(x, S_BCM1480_MC_SLEW, M_BCM1480_MC_SLEW)
 
-#define M_BCM1480_MC_SSTL_VOLTAGE           _SB_MAKEMASK1(35)
+#define M_BCM1480_MC_SSTL_VOLTAGE	    _SB_MAKEMASK1(35)
 
 /*
  * Global Channel Interleave Register (Table 100)
  */
 
-#define S_BCM1480_MC_INTLV0                 0
-#define M_BCM1480_MC_INTLV0                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0)
-#define V_BCM1480_MC_INTLV0(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0)
-#define G_BCM1480_MC_INTLV0(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0)
+#define S_BCM1480_MC_INTLV0		    0
+#define M_BCM1480_MC_INTLV0		    _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x)		    _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0)
 
-#define S_BCM1480_MC_INTLV1                 8
-#define M_BCM1480_MC_INTLV1                 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1)
-#define V_BCM1480_MC_INTLV1(x)              _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1)
-#define G_BCM1480_MC_INTLV1(x)              _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1)
+#define S_BCM1480_MC_INTLV1		    8
+#define M_BCM1480_MC_INTLV1		    _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x)		    _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x)		    _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1)
 
-#define S_BCM1480_MC_INTLV_MODE             16
-#define M_BCM1480_MC_INTLV_MODE             _SB_MAKEMASK(3, S_BCM1480_MC_INTLV_MODE)
-#define V_BCM1480_MC_INTLV_MODE(x)          _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV_MODE)
-#define G_BCM1480_MC_INTLV_MODE(x)          _SB_GETVALUE(x, S_BCM1480_MC_INTLV_MODE, M_BCM1480_MC_INTLV_MODE)
+#define S_BCM1480_MC_INTLV_MODE		    16
+#define M_BCM1480_MC_INTLV_MODE		    _SB_MAKEMASK(3, S_BCM1480_MC_INTLV_MODE)
+#define V_BCM1480_MC_INTLV_MODE(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV_MODE)
+#define G_BCM1480_MC_INTLV_MODE(x)	    _SB_GETVALUE(x, S_BCM1480_MC_INTLV_MODE, M_BCM1480_MC_INTLV_MODE)
 
-#define K_BCM1480_MC_INTLV_MODE_NONE        0x0
-#define K_BCM1480_MC_INTLV_MODE_01          0x1
-#define K_BCM1480_MC_INTLV_MODE_23          0x2
-#define K_BCM1480_MC_INTLV_MODE_01_23       0x3
-#define K_BCM1480_MC_INTLV_MODE_0123        0x4
+#define K_BCM1480_MC_INTLV_MODE_NONE	    0x0
+#define K_BCM1480_MC_INTLV_MODE_01	    0x1
+#define K_BCM1480_MC_INTLV_MODE_23	    0x2
+#define K_BCM1480_MC_INTLV_MODE_01_23	    0x3
+#define K_BCM1480_MC_INTLV_MODE_0123	    0x4
 
-#define V_BCM1480_MC_INTLV_MODE_NONE        V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_NONE)
-#define V_BCM1480_MC_INTLV_MODE_01          V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01)
-#define V_BCM1480_MC_INTLV_MODE_23          V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_23)
-#define V_BCM1480_MC_INTLV_MODE_01_23       V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01_23)
-#define V_BCM1480_MC_INTLV_MODE_0123        V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_0123)
+#define V_BCM1480_MC_INTLV_MODE_NONE	    V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_NONE)
+#define V_BCM1480_MC_INTLV_MODE_01	    V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01)
+#define V_BCM1480_MC_INTLV_MODE_23	    V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_23)
+#define V_BCM1480_MC_INTLV_MODE_01_23	    V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01_23)
+#define V_BCM1480_MC_INTLV_MODE_0123	    V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_0123)
 
 /*
  * ECC Status Register
  */
 
-#define S_BCM1480_MC_ECC_ERR_ADDR           0
-#define M_BCM1480_MC_ECC_ERR_ADDR           _SB_MAKEMASK(37, S_BCM1480_MC_ECC_ERR_ADDR)
-#define V_BCM1480_MC_ECC_ERR_ADDR(x)        _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR)
-#define G_BCM1480_MC_ECC_ERR_ADDR(x)        _SB_GETVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR, M_BCM1480_MC_ECC_ERR_ADDR)
+#define S_BCM1480_MC_ECC_ERR_ADDR	    0
+#define M_BCM1480_MC_ECC_ERR_ADDR	    _SB_MAKEMASK(37, S_BCM1480_MC_ECC_ERR_ADDR)
+#define V_BCM1480_MC_ECC_ERR_ADDR(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR)
+#define G_BCM1480_MC_ECC_ERR_ADDR(x)	    _SB_GETVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR, M_BCM1480_MC_ECC_ERR_ADDR)
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
-#define M_BCM1480_MC_ECC_ERR_RMW            _SB_MAKEMASK1(60)
+#define M_BCM1480_MC_ECC_ERR_RMW	    _SB_MAKEMASK1(60)
 #endif
 
-#define M_BCM1480_MC_ECC_MULT_ERR_DET       _SB_MAKEMASK1(61)
-#define M_BCM1480_MC_ECC_UERR_DET           _SB_MAKEMASK1(62)
-#define M_BCM1480_MC_ECC_CERR_DET           _SB_MAKEMASK1(63)
+#define M_BCM1480_MC_ECC_MULT_ERR_DET	    _SB_MAKEMASK1(61)
+#define M_BCM1480_MC_ECC_UERR_DET	    _SB_MAKEMASK1(62)
+#define M_BCM1480_MC_ECC_CERR_DET	    _SB_MAKEMASK1(63)
 
 /*
  * Global ECC Address Register (Table 102)
  */
 
-#define S_BCM1480_MC_ECC_CORR_ADDR          0
-#define M_BCM1480_MC_ECC_CORR_ADDR          _SB_MAKEMASK(37, S_BCM1480_MC_ECC_CORR_ADDR)
-#define V_BCM1480_MC_ECC_CORR_ADDR(x)       _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR)
-#define G_BCM1480_MC_ECC_CORR_ADDR(x)       _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR, M_BCM1480_MC_ECC_CORR_ADDR)
+#define S_BCM1480_MC_ECC_CORR_ADDR	    0
+#define M_BCM1480_MC_ECC_CORR_ADDR	    _SB_MAKEMASK(37, S_BCM1480_MC_ECC_CORR_ADDR)
+#define V_BCM1480_MC_ECC_CORR_ADDR(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR)
+#define G_BCM1480_MC_ECC_CORR_ADDR(x)	    _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR, M_BCM1480_MC_ECC_CORR_ADDR)
 
 /*
  * Global ECC Correction Register (Table 103)
  */
 
-#define S_BCM1480_MC_ECC_CORRECT            0
-#define M_BCM1480_MC_ECC_CORRECT            _SB_MAKEMASK(64, S_BCM1480_MC_ECC_CORRECT)
-#define V_BCM1480_MC_ECC_CORRECT(x)         _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORRECT)
-#define G_BCM1480_MC_ECC_CORRECT(x)         _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORRECT, M_BCM1480_MC_ECC_CORRECT)
+#define S_BCM1480_MC_ECC_CORRECT	    0
+#define M_BCM1480_MC_ECC_CORRECT	    _SB_MAKEMASK(64, S_BCM1480_MC_ECC_CORRECT)
+#define V_BCM1480_MC_ECC_CORRECT(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORRECT)
+#define G_BCM1480_MC_ECC_CORRECT(x)	    _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORRECT, M_BCM1480_MC_ECC_CORRECT)
 
 /*
  * Global ECC Performance Counters Control Register (Table 104)
  */
 
-#define S_BCM1480_MC_CHANNEL_SELECT         0
-#define M_BCM1480_MC_CHANNEL_SELECT         _SB_MAKEMASK(4, S_BCM1480_MC_CHANNEL_SELECT)
-#define V_BCM1480_MC_CHANNEL_SELECT(x)      _SB_MAKEVALUE(x, S_BCM1480_MC_CHANNEL_SELECT)
-#define G_BCM1480_MC_CHANNEL_SELECT(x)      _SB_GETVALUE(x, S_BCM1480_MC_CHANNEL_SELECT, M_BCM1480_MC_CHANNEL_SELECT)
-#define K_BCM1480_MC_CHANNEL_SELECT_0       0x1
-#define K_BCM1480_MC_CHANNEL_SELECT_1       0x2
-#define K_BCM1480_MC_CHANNEL_SELECT_2       0x4
-#define K_BCM1480_MC_CHANNEL_SELECT_3       0x8
+#define S_BCM1480_MC_CHANNEL_SELECT	    0
+#define M_BCM1480_MC_CHANNEL_SELECT	    _SB_MAKEMASK(4, S_BCM1480_MC_CHANNEL_SELECT)
+#define V_BCM1480_MC_CHANNEL_SELECT(x)	    _SB_MAKEVALUE(x, S_BCM1480_MC_CHANNEL_SELECT)
+#define G_BCM1480_MC_CHANNEL_SELECT(x)	    _SB_GETVALUE(x, S_BCM1480_MC_CHANNEL_SELECT, M_BCM1480_MC_CHANNEL_SELECT)
+#define K_BCM1480_MC_CHANNEL_SELECT_0	    0x1
+#define K_BCM1480_MC_CHANNEL_SELECT_1	    0x2
+#define K_BCM1480_MC_CHANNEL_SELECT_2	    0x4
+#define K_BCM1480_MC_CHANNEL_SELECT_3	    0x8
 
 #endif /* _BCM1480_MC_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_regs.h b/arch/mips/include/asm/sibyte/bcm1480_regs.h
index 84d168d..ec0dacf 100644
--- a/arch/mips/include/asm/sibyte/bcm1480_regs.h
+++ b/arch/mips/include/asm/sibyte/bcm1480_regs.h
@@ -1,7 +1,7 @@
 /*  *********************************************************************
     *  BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package
     *
-    *  Register Definitions                     File: bcm1480_regs.h
+    *  Register Definitions			File: bcm1480_regs.h
     *
     *  This module contains the addresses of the on-chip peripherals
     *  on the BCM1280 and BCM1480.
@@ -80,48 +80,48 @@
     * Memory Controller Registers (Section 6)
     ********************************************************************* */
 
-#define A_BCM1480_MC_BASE_0                 0x0010050000
-#define A_BCM1480_MC_BASE_1                 0x0010051000
-#define A_BCM1480_MC_BASE_2                 0x0010052000
-#define A_BCM1480_MC_BASE_3                 0x0010053000
-#define BCM1480_MC_REGISTER_SPACING         0x1000
+#define A_BCM1480_MC_BASE_0		    0x0010050000
+#define A_BCM1480_MC_BASE_1		    0x0010051000
+#define A_BCM1480_MC_BASE_2		    0x0010052000
+#define A_BCM1480_MC_BASE_3		    0x0010053000
+#define BCM1480_MC_REGISTER_SPACING	    0x1000
 
-#define A_BCM1480_MC_BASE(ctlid)            (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING)
+#define A_BCM1480_MC_BASE(ctlid)	    (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING)
 #define A_BCM1480_MC_REGISTER(ctlid, reg)    (A_BCM1480_MC_BASE(ctlid)+(reg))
 
-#define R_BCM1480_MC_CONFIG                 0x0000000100
-#define R_BCM1480_MC_CS_START               0x0000000120
-#define R_BCM1480_MC_CS_END                 0x0000000140
-#define S_BCM1480_MC_CS_STARTEND            24
+#define R_BCM1480_MC_CONFIG		    0x0000000100
+#define R_BCM1480_MC_CS_START		    0x0000000120
+#define R_BCM1480_MC_CS_END		    0x0000000140
+#define S_BCM1480_MC_CS_STARTEND	    24
 
-#define R_BCM1480_MC_CS01_ROW0              0x0000000180
-#define R_BCM1480_MC_CS01_ROW1              0x00000001A0
-#define R_BCM1480_MC_CS23_ROW0              0x0000000200
-#define R_BCM1480_MC_CS23_ROW1              0x0000000220
-#define R_BCM1480_MC_CS01_COL0              0x0000000280
-#define R_BCM1480_MC_CS01_COL1              0x00000002A0
-#define R_BCM1480_MC_CS23_COL0              0x0000000300
-#define R_BCM1480_MC_CS23_COL1              0x0000000320
+#define R_BCM1480_MC_CS01_ROW0		    0x0000000180
+#define R_BCM1480_MC_CS01_ROW1		    0x00000001A0
+#define R_BCM1480_MC_CS23_ROW0		    0x0000000200
+#define R_BCM1480_MC_CS23_ROW1		    0x0000000220
+#define R_BCM1480_MC_CS01_COL0		    0x0000000280
+#define R_BCM1480_MC_CS01_COL1		    0x00000002A0
+#define R_BCM1480_MC_CS23_COL0		    0x0000000300
+#define R_BCM1480_MC_CS23_COL1		    0x0000000320
 
-#define R_BCM1480_MC_CSX_BASE               0x0000000180
-#define R_BCM1480_MC_CSX_ROW0               0x0000000000   /* relative to CSX_BASE */
-#define R_BCM1480_MC_CSX_ROW1               0x0000000020   /* relative to CSX_BASE */
-#define R_BCM1480_MC_CSX_COL0               0x0000000100   /* relative to CSX_BASE */
-#define R_BCM1480_MC_CSX_COL1               0x0000000120   /* relative to CSX_BASE */
-#define BCM1480_MC_CSX_SPACING              0x0000000080   /* CS23 relative to CS01 */
+#define R_BCM1480_MC_CSX_BASE		    0x0000000180
+#define R_BCM1480_MC_CSX_ROW0		    0x0000000000   /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_ROW1		    0x0000000020   /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL0		    0x0000000100   /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL1		    0x0000000120   /* relative to CSX_BASE */
+#define BCM1480_MC_CSX_SPACING		    0x0000000080   /* CS23 relative to CS01 */
 
-#define R_BCM1480_MC_CS01_BA                0x0000000380
-#define R_BCM1480_MC_CS23_BA                0x00000003A0
-#define R_BCM1480_MC_DRAMCMD                0x0000000400
-#define R_BCM1480_MC_DRAMMODE               0x0000000420
-#define R_BCM1480_MC_CLOCK_CFG              0x0000000440
-#define R_BCM1480_MC_MCLK_CFG               R_BCM1480_MC_CLOCK_CFG
-#define R_BCM1480_MC_TEST_DATA              0x0000000480
-#define R_BCM1480_MC_TEST_ECC               0x00000004A0
-#define R_BCM1480_MC_TIMING1                0x00000004C0
-#define R_BCM1480_MC_TIMING2                0x00000004E0
-#define R_BCM1480_MC_DLL_CFG                0x0000000500
-#define R_BCM1480_MC_DRIVE_CFG              0x0000000520
+#define R_BCM1480_MC_CS01_BA		    0x0000000380
+#define R_BCM1480_MC_CS23_BA		    0x00000003A0
+#define R_BCM1480_MC_DRAMCMD		    0x0000000400
+#define R_BCM1480_MC_DRAMMODE		    0x0000000420
+#define R_BCM1480_MC_CLOCK_CFG		    0x0000000440
+#define R_BCM1480_MC_MCLK_CFG		    R_BCM1480_MC_CLOCK_CFG
+#define R_BCM1480_MC_TEST_DATA		    0x0000000480
+#define R_BCM1480_MC_TEST_ECC		    0x00000004A0
+#define R_BCM1480_MC_TIMING1		    0x00000004C0
+#define R_BCM1480_MC_TIMING2		    0x00000004E0
+#define R_BCM1480_MC_DLL_CFG		    0x0000000500
+#define R_BCM1480_MC_DRIVE_CFG		    0x0000000520
 
 #if SIBYTE_HDR_FEATURE(1480, PASS2)
 #define R_BCM1480_MC_ODT		    0x0000000460
@@ -129,55 +129,55 @@
 #endif
 
 /* Global registers (single instance) */
-#define A_BCM1480_MC_GLB_CONFIG             0x0010054100
-#define A_BCM1480_MC_GLB_INTLV              0x0010054120
-#define A_BCM1480_MC_GLB_ECC_STATUS         0x0010054140
-#define A_BCM1480_MC_GLB_ECC_ADDR           0x0010054160
-#define A_BCM1480_MC_GLB_ECC_CORRECT        0x0010054180
+#define A_BCM1480_MC_GLB_CONFIG		    0x0010054100
+#define A_BCM1480_MC_GLB_INTLV		    0x0010054120
+#define A_BCM1480_MC_GLB_ECC_STATUS	    0x0010054140
+#define A_BCM1480_MC_GLB_ECC_ADDR	    0x0010054160
+#define A_BCM1480_MC_GLB_ECC_CORRECT	    0x0010054180
 #define A_BCM1480_MC_GLB_PERF_CNT_CONTROL   0x00100541A0
 
 /*  *********************************************************************
     * L2 Cache Control Registers (Section 5)
     ********************************************************************* */
 
-#define A_BCM1480_L2_BASE                   0x0010040000
+#define A_BCM1480_L2_BASE		    0x0010040000
 
-#define A_BCM1480_L2_READ_TAG               0x0010040018
-#define A_BCM1480_L2_ECC_TAG                0x0010040038
-#define A_BCM1480_L2_MISC0_VALUE            0x0010040058
-#define A_BCM1480_L2_MISC1_VALUE            0x0010040078
-#define A_BCM1480_L2_MISC2_VALUE            0x0010040098
-#define A_BCM1480_L2_MISC_CONFIG            0x0010040040	/* x040 */
-#define A_BCM1480_L2_CACHE_DISABLE          0x0010040060	/* x060 */
+#define A_BCM1480_L2_READ_TAG		    0x0010040018
+#define A_BCM1480_L2_ECC_TAG		    0x0010040038
+#define A_BCM1480_L2_MISC0_VALUE	    0x0010040058
+#define A_BCM1480_L2_MISC1_VALUE	    0x0010040078
+#define A_BCM1480_L2_MISC2_VALUE	    0x0010040098
+#define A_BCM1480_L2_MISC_CONFIG	    0x0010040040	/* x040 */
+#define A_BCM1480_L2_CACHE_DISABLE	    0x0010040060	/* x060 */
 #define A_BCM1480_L2_MAKECACHEDISABLE(x)    (A_BCM1480_L2_CACHE_DISABLE | (((x)&0xF) << 12))
-#define A_BCM1480_L2_WAY_ENABLE_3_0         0x0010040080	/* x080 */
-#define A_BCM1480_L2_WAY_ENABLE_7_4         0x00100400A0	/* x0A0 */
+#define A_BCM1480_L2_WAY_ENABLE_3_0	    0x0010040080	/* x080 */
+#define A_BCM1480_L2_WAY_ENABLE_7_4	    0x00100400A0	/* x0A0 */
 #define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x)  (A_BCM1480_L2_WAY_ENABLE_3_0 | (((x)&0xF) << 12))
 #define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x)  (A_BCM1480_L2_WAY_ENABLE_7_4 | (((x)&0xF) << 12))
 #define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x)  (A_BCM1480_L2_WAY_ENABLE_3_0 | (((~x)&0xF) << 12))
 #define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x)  (A_BCM1480_L2_WAY_ENABLE_7_4 | (((~x)&0xF) << 12))
-#define A_BCM1480_L2_WAY_LOCAL_3_0          0x0010040100	/* x100 */
-#define A_BCM1480_L2_WAY_LOCAL_7_4          0x0010040120	/* x120 */
-#define A_BCM1480_L2_WAY_REMOTE_3_0         0x0010040140	/* x140 */
-#define A_BCM1480_L2_WAY_REMOTE_7_4         0x0010040160	/* x160 */
-#define A_BCM1480_L2_WAY_AGENT_3_0          0x00100400C0	/* xxC0 */
-#define A_BCM1480_L2_WAY_AGENT_7_4          0x00100400E0	/* xxE0 */
+#define A_BCM1480_L2_WAY_LOCAL_3_0	    0x0010040100	/* x100 */
+#define A_BCM1480_L2_WAY_LOCAL_7_4	    0x0010040120	/* x120 */
+#define A_BCM1480_L2_WAY_REMOTE_3_0	    0x0010040140	/* x140 */
+#define A_BCM1480_L2_WAY_REMOTE_7_4	    0x0010040160	/* x160 */
+#define A_BCM1480_L2_WAY_AGENT_3_0	    0x00100400C0	/* xxC0 */
+#define A_BCM1480_L2_WAY_AGENT_7_4	    0x00100400E0	/* xxE0 */
 #define A_BCM1480_L2_WAY_ENABLE(A, banks)   (A | (((~(banks))&0x0F) << 8))
-#define A_BCM1480_L2_BANK_BASE              0x00D0300000
-#define A_BCM1480_L2_BANK_ADDRESS(b)        (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17))
-#define A_BCM1480_L2_MGMT_TAG_BASE          0x00D0000000
+#define A_BCM1480_L2_BANK_BASE		    0x00D0300000
+#define A_BCM1480_L2_BANK_ADDRESS(b)	    (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17))
+#define A_BCM1480_L2_MGMT_TAG_BASE	    0x00D0000000
 
 
 /*  *********************************************************************
     * PCI-X Interface Registers (Section 7)
     ********************************************************************* */
 
-#define A_BCM1480_PCI_BASE                  0x0010061400
+#define A_BCM1480_PCI_BASE		    0x0010061400
 
-#define A_BCM1480_PCI_RESET                 0x0010061400
-#define A_BCM1480_PCI_DLL                   0x0010061500
+#define A_BCM1480_PCI_RESET		    0x0010061400
+#define A_BCM1480_PCI_DLL		    0x0010061500
 
-#define A_BCM1480_PCI_TYPE00_HEADER         0x002E000000
+#define A_BCM1480_PCI_TYPE00_HEADER	    0x002E000000
 
 /*  *********************************************************************
     * Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6)
@@ -185,19 +185,19 @@
 
 /* No register changes with Rev.C BCM1250, but one additional MAC */
 
-#define A_BCM1480_MAC_BASE_2        0x0010066000
+#define A_BCM1480_MAC_BASE_2	    0x0010066000
 
 #ifndef A_MAC_BASE_2
-#define A_MAC_BASE_2                A_BCM1480_MAC_BASE_2
+#define A_MAC_BASE_2		    A_BCM1480_MAC_BASE_2
 #endif
 
-#define A_BCM1480_MAC_BASE_3        0x0010067000
-#define A_MAC_BASE_3                A_BCM1480_MAC_BASE_3
+#define A_BCM1480_MAC_BASE_3	    0x0010067000
+#define A_MAC_BASE_3		    A_BCM1480_MAC_BASE_3
 
-#define R_BCM1480_MAC_DMA_OODPKTLOST        0x00000038
+#define R_BCM1480_MAC_DMA_OODPKTLOST	    0x00000038
 
 #ifndef R_MAC_DMA_OODPKTLOST
-#define R_MAC_DMA_OODPKTLOST        R_BCM1480_MAC_DMA_OODPKTLOST
+#define R_MAC_DMA_OODPKTLOST	    R_BCM1480_MAC_DMA_OODPKTLOST
 #endif
 
 
@@ -208,18 +208,18 @@
 /* No significant differences from BCM1250, two DUARTs */
 
 /*  Conventions, per user manual:
- *     DUART    generic, channels A,B,C,D
- *     DUART0   implementing channels A,B
- *     DUART1   inplementing channels C,D
+ *     DUART	generic, channels A,B,C,D
+ *     DUART0	implementing channels A,B
+ *     DUART1	inplementing channels C,D
  */
 
-#define BCM1480_DUART_NUM_PORTS           4
+#define BCM1480_DUART_NUM_PORTS		  4
 
-#define A_BCM1480_DUART0                    0x0010060000
-#define A_BCM1480_DUART1                    0x0010060400
-#define A_BCM1480_DUART(chan)               ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1)
+#define A_BCM1480_DUART0		    0x0010060000
+#define A_BCM1480_DUART1		    0x0010060400
+#define A_BCM1480_DUART(chan)		    ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1)
 
-#define BCM1480_DUART_CHANREG_SPACING       0x100
+#define BCM1480_DUART_CHANREG_SPACING	    0x100
 #define A_BCM1480_DUART_CHANREG(chan, reg)				\
 	(A_BCM1480_DUART(chan) +					\
 	 BCM1480_DUART_CHANREG_SPACING * (((chan) & 1) + 1) + (reg))
@@ -249,43 +249,43 @@
  * These constants are the absolute addresses.
  */
 
-#define A_BCM1480_DUART_MODE_REG_1_C        0x0010060400
-#define A_BCM1480_DUART_MODE_REG_2_C        0x0010060410
-#define A_BCM1480_DUART_STATUS_C            0x0010060420
-#define A_BCM1480_DUART_CLK_SEL_C           0x0010060430
-#define A_BCM1480_DUART_FULL_CTL_C          0x0010060440
-#define A_BCM1480_DUART_CMD_C               0x0010060450
-#define A_BCM1480_DUART_RX_HOLD_C           0x0010060460
-#define A_BCM1480_DUART_TX_HOLD_C           0x0010060470
-#define A_BCM1480_DUART_OPCR_C              0x0010060480
-#define A_BCM1480_DUART_AUX_CTRL_C          0x0010060490
+#define A_BCM1480_DUART_MODE_REG_1_C	    0x0010060400
+#define A_BCM1480_DUART_MODE_REG_2_C	    0x0010060410
+#define A_BCM1480_DUART_STATUS_C	    0x0010060420
+#define A_BCM1480_DUART_CLK_SEL_C	    0x0010060430
+#define A_BCM1480_DUART_FULL_CTL_C	    0x0010060440
+#define A_BCM1480_DUART_CMD_C		    0x0010060450
+#define A_BCM1480_DUART_RX_HOLD_C	    0x0010060460
+#define A_BCM1480_DUART_TX_HOLD_C	    0x0010060470
+#define A_BCM1480_DUART_OPCR_C		    0x0010060480
+#define A_BCM1480_DUART_AUX_CTRL_C	    0x0010060490
 
-#define A_BCM1480_DUART_MODE_REG_1_D        0x0010060500
-#define A_BCM1480_DUART_MODE_REG_2_D        0x0010060510
-#define A_BCM1480_DUART_STATUS_D            0x0010060520
-#define A_BCM1480_DUART_CLK_SEL_D           0x0010060530
-#define A_BCM1480_DUART_FULL_CTL_D          0x0010060540
-#define A_BCM1480_DUART_CMD_D               0x0010060550
-#define A_BCM1480_DUART_RX_HOLD_D           0x0010060560
-#define A_BCM1480_DUART_TX_HOLD_D           0x0010060570
-#define A_BCM1480_DUART_OPCR_D              0x0010060580
-#define A_BCM1480_DUART_AUX_CTRL_D          0x0010060590
+#define A_BCM1480_DUART_MODE_REG_1_D	    0x0010060500
+#define A_BCM1480_DUART_MODE_REG_2_D	    0x0010060510
+#define A_BCM1480_DUART_STATUS_D	    0x0010060520
+#define A_BCM1480_DUART_CLK_SEL_D	    0x0010060530
+#define A_BCM1480_DUART_FULL_CTL_D	    0x0010060540
+#define A_BCM1480_DUART_CMD_D		    0x0010060550
+#define A_BCM1480_DUART_RX_HOLD_D	    0x0010060560
+#define A_BCM1480_DUART_TX_HOLD_D	    0x0010060570
+#define A_BCM1480_DUART_OPCR_D		    0x0010060580
+#define A_BCM1480_DUART_AUX_CTRL_D	    0x0010060590
 
-#define A_BCM1480_DUART_INPORT_CHNG_CD      0x0010060600
-#define A_BCM1480_DUART_AUX_CTRL_CD         0x0010060610
-#define A_BCM1480_DUART_ISR_C               0x0010060620
-#define A_BCM1480_DUART_IMR_C               0x0010060630
-#define A_BCM1480_DUART_ISR_D               0x0010060640
-#define A_BCM1480_DUART_IMR_D               0x0010060650
-#define A_BCM1480_DUART_OUT_PORT_CD         0x0010060660
-#define A_BCM1480_DUART_OPCR_CD             0x0010060670
-#define A_BCM1480_DUART_IN_PORT_CD          0x0010060680
-#define A_BCM1480_DUART_ISR_CD              0x0010060690
-#define A_BCM1480_DUART_IMR_CD              0x00100606A0
-#define A_BCM1480_DUART_SET_OPR_CD          0x00100606B0
-#define A_BCM1480_DUART_CLEAR_OPR_CD        0x00100606C0
-#define A_BCM1480_DUART_INPORT_CHNG_C       0x00100606D0
-#define A_BCM1480_DUART_INPORT_CHNG_D       0x00100606E0
+#define A_BCM1480_DUART_INPORT_CHNG_CD	    0x0010060600
+#define A_BCM1480_DUART_AUX_CTRL_CD	    0x0010060610
+#define A_BCM1480_DUART_ISR_C		    0x0010060620
+#define A_BCM1480_DUART_IMR_C		    0x0010060630
+#define A_BCM1480_DUART_ISR_D		    0x0010060640
+#define A_BCM1480_DUART_IMR_D		    0x0010060650
+#define A_BCM1480_DUART_OUT_PORT_CD	    0x0010060660
+#define A_BCM1480_DUART_OPCR_CD		    0x0010060670
+#define A_BCM1480_DUART_IN_PORT_CD	    0x0010060680
+#define A_BCM1480_DUART_ISR_CD		    0x0010060690
+#define A_BCM1480_DUART_IMR_CD		    0x00100606A0
+#define A_BCM1480_DUART_SET_OPR_CD	    0x00100606B0
+#define A_BCM1480_DUART_CLEAR_OPR_CD	    0x00100606C0
+#define A_BCM1480_DUART_INPORT_CHNG_C	    0x00100606D0
+#define A_BCM1480_DUART_INPORT_CHNG_D	    0x00100606E0
 
 
 /*  *********************************************************************
@@ -301,8 +301,8 @@
 
 /* One additional GPIO register, placed _before_ the BCM1250's GPIO block base */
 
-#define A_BCM1480_GPIO_INT_ADD_TYPE         0x0010061A78
-#define R_BCM1480_GPIO_INT_ADD_TYPE         (-8)
+#define A_BCM1480_GPIO_INT_ADD_TYPE	    0x0010061A78
+#define R_BCM1480_GPIO_INT_ADD_TYPE	    (-8)
 
 #define A_GPIO_INT_ADD_TYPE	A_BCM1480_GPIO_INT_ADD_TYPE
 #define R_GPIO_INT_ADD_TYPE	R_BCM1480_GPIO_INT_ADD_TYPE
@@ -321,30 +321,30 @@
 
 /* Watchdog timers */
 
-#define A_BCM1480_SCD_WDOG_2                0x0010022050
-#define A_BCM1480_SCD_WDOG_3                0x0010022150
+#define A_BCM1480_SCD_WDOG_2		    0x0010022050
+#define A_BCM1480_SCD_WDOG_3		    0x0010022150
 
-#define BCM1480_SCD_NUM_WDOGS               4
+#define BCM1480_SCD_NUM_WDOGS		    4
 
-#define A_BCM1480_SCD_WDOG_BASE(w)       (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100)
+#define A_BCM1480_SCD_WDOG_BASE(w)	 (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100)
 #define A_BCM1480_SCD_WDOG_REGISTER(w, r) (A_BCM1480_SCD_WDOG_BASE(w) + (r))
 
-#define A_BCM1480_SCD_WDOG_INIT_2       0x0010022050
-#define A_BCM1480_SCD_WDOG_CNT_2        0x0010022058
-#define A_BCM1480_SCD_WDOG_CFG_2        0x0010022060
+#define A_BCM1480_SCD_WDOG_INIT_2	0x0010022050
+#define A_BCM1480_SCD_WDOG_CNT_2	0x0010022058
+#define A_BCM1480_SCD_WDOG_CFG_2	0x0010022060
 
-#define A_BCM1480_SCD_WDOG_INIT_3       0x0010022150
-#define A_BCM1480_SCD_WDOG_CNT_3        0x0010022158
-#define A_BCM1480_SCD_WDOG_CFG_3        0x0010022160
+#define A_BCM1480_SCD_WDOG_INIT_3	0x0010022150
+#define A_BCM1480_SCD_WDOG_CNT_3	0x0010022158
+#define A_BCM1480_SCD_WDOG_CFG_3	0x0010022160
 
 /* BCM1480 has two additional compare registers */
 
 #define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT		A_SCD_ZBBUS_CYCLE_COUNT
-#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE       0x0010020C00
-#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0           A_SCD_ZBBUS_CYCLE_CP0
-#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1           A_SCD_ZBBUS_CYCLE_CP1
-#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2           0x0010020C10
-#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3           0x0010020C18
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE	0x0010020C00
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0		A_SCD_ZBBUS_CYCLE_CP0
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1		A_SCD_ZBBUS_CYCLE_CP1
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2		0x0010020C10
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3		0x0010020C18
 
 /*  *********************************************************************
     * System Control Registers (Section 4.2)
@@ -352,7 +352,7 @@
 
 /* Scratch register in different place */
 
-#define A_BCM1480_SCD_SCRATCH	 	0x100200A0
+#define A_BCM1480_SCD_SCRATCH		0x100200A0
 
 /*  *********************************************************************
     * System Address Trap Registers (Section 4.9)
@@ -364,68 +364,68 @@
     * System Interrupt Mapper Registers (Sections 4.3-4.5)
     ********************************************************************* */
 
-#define A_BCM1480_IMR_CPU0_BASE             0x0010020000
-#define A_BCM1480_IMR_CPU1_BASE             0x0010022000
-#define A_BCM1480_IMR_CPU2_BASE             0x0010024000
-#define A_BCM1480_IMR_CPU3_BASE             0x0010026000
-#define BCM1480_IMR_REGISTER_SPACING        0x2000
+#define A_BCM1480_IMR_CPU0_BASE		    0x0010020000
+#define A_BCM1480_IMR_CPU1_BASE		    0x0010022000
+#define A_BCM1480_IMR_CPU2_BASE		    0x0010024000
+#define A_BCM1480_IMR_CPU3_BASE		    0x0010026000
+#define BCM1480_IMR_REGISTER_SPACING	    0x2000
 #define BCM1480_IMR_REGISTER_SPACING_SHIFT  13
 
-#define A_BCM1480_IMR_MAPPER(cpu)       (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING)
+#define A_BCM1480_IMR_MAPPER(cpu)	(A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING)
 #define A_BCM1480_IMR_REGISTER(cpu, reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg))
 
 /* Most IMR registers are 128 bits, implemented as non-contiguous
    64-bit registers high (_H) and low (_L) */
-#define BCM1480_IMR_HL_SPACING                  0x1000
+#define BCM1480_IMR_HL_SPACING			0x1000
 
-#define R_BCM1480_IMR_INTERRUPT_DIAG_H          0x0010
-#define R_BCM1480_IMR_LDT_INTERRUPT_H           0x0018
-#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H       0x0020
-#define R_BCM1480_IMR_INTERRUPT_MASK_H          0x0028
-#define R_BCM1480_IMR_INTERRUPT_TRACE_H         0x0038
+#define R_BCM1480_IMR_INTERRUPT_DIAG_H		0x0010
+#define R_BCM1480_IMR_LDT_INTERRUPT_H		0x0018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H	0x0020
+#define R_BCM1480_IMR_INTERRUPT_MASK_H		0x0028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_H		0x0038
 #define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040
-#define R_BCM1480_IMR_LDT_INTERRUPT_SET         0x0048
-#define R_BCM1480_IMR_MAILBOX_0_CPU             0x00C0
-#define R_BCM1480_IMR_MAILBOX_0_SET_CPU         0x00C8
-#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU         0x00D0
-#define R_BCM1480_IMR_MAILBOX_1_CPU             0x00E0
-#define R_BCM1480_IMR_MAILBOX_1_SET_CPU         0x00E8
-#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU         0x00F0
-#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H   0x0100
-#define BCM1480_IMR_INTERRUPT_STATUS_COUNT      8
-#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H      0x0200
-#define BCM1480_IMR_INTERRUPT_MAP_COUNT         64
+#define R_BCM1480_IMR_LDT_INTERRUPT_SET		0x0048
+#define R_BCM1480_IMR_MAILBOX_0_CPU		0x00C0
+#define R_BCM1480_IMR_MAILBOX_0_SET_CPU		0x00C8
+#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU		0x00D0
+#define R_BCM1480_IMR_MAILBOX_1_CPU		0x00E0
+#define R_BCM1480_IMR_MAILBOX_1_SET_CPU		0x00E8
+#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU		0x00F0
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H	0x0100
+#define BCM1480_IMR_INTERRUPT_STATUS_COUNT	8
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H	0x0200
+#define BCM1480_IMR_INTERRUPT_MAP_COUNT		64
 
-#define R_BCM1480_IMR_INTERRUPT_DIAG_L          0x1010
-#define R_BCM1480_IMR_LDT_INTERRUPT_L           0x1018
-#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L       0x1020
-#define R_BCM1480_IMR_INTERRUPT_MASK_L          0x1028
-#define R_BCM1480_IMR_INTERRUPT_TRACE_L         0x1038
+#define R_BCM1480_IMR_INTERRUPT_DIAG_L		0x1010
+#define R_BCM1480_IMR_LDT_INTERRUPT_L		0x1018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L	0x1020
+#define R_BCM1480_IMR_INTERRUPT_MASK_L		0x1028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_L		0x1038
 #define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040
-#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L   0x1100
-#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L      0x1200
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L	0x1100
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L	0x1200
 
-#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE   0x0010028000
-#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE   0x0010028100
-#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE   0x0010028200
-#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE   0x0010028300
-#define BCM1480_IMR_ALIAS_MAILBOX_SPACING       0100
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE	0x0010028000
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE	0x0010028100
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE	0x0010028200
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE	0x0010028300
+#define BCM1480_IMR_ALIAS_MAILBOX_SPACING	0100
 
 #define A_BCM1480_IMR_ALIAS_MAILBOX(cpu)     (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \
-                                        (cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING)
+					(cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING)
 #define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu, reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg))
 
-#define R_BCM1480_IMR_ALIAS_MAILBOX_0           0x0000		/* 0x0x0 */
-#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET       0x0008		/* 0x0x8 */
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0		0x0000		/* 0x0x0 */
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET	0x0008		/* 0x0x8 */
 
 /*
  * these macros work together to build the address of a mailbox
  * register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2)
  * for mbox_0_set_cpu2 returns 0x00100240C8
  */
-#define R_BCM1480_IMR_MAILBOX_CPU         0x00
-#define R_BCM1480_IMR_MAILBOX_SET         0x08
-#define R_BCM1480_IMR_MAILBOX_CLR         0x10
+#define R_BCM1480_IMR_MAILBOX_CPU	  0x00
+#define R_BCM1480_IMR_MAILBOX_SET	  0x08
+#define R_BCM1480_IMR_MAILBOX_CLR	  0x10
 #define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20
 #define A_BCM1480_MAILBOX_REGISTER(num, reg, cpu) \
     (A_BCM1480_IMR_CPU0_BASE + \
@@ -440,22 +440,22 @@
 /* BCM1480 has four more performance counter registers, and two control
    registers. */
 
-#define A_BCM1480_SCD_PERF_CNT_BASE         0x00100204C0
+#define A_BCM1480_SCD_PERF_CNT_BASE	    0x00100204C0
 
-#define A_BCM1480_SCD_PERF_CNT_CFG0         0x00100204C0
-#define A_BCM1480_SCD_PERF_CNT_CFG_0        A_BCM1480_SCD_PERF_CNT_CFG0
-#define A_BCM1480_SCD_PERF_CNT_CFG1         0x00100204C8
-#define A_BCM1480_SCD_PERF_CNT_CFG_1        A_BCM1480_SCD_PERF_CNT_CFG1
+#define A_BCM1480_SCD_PERF_CNT_CFG0	    0x00100204C0
+#define A_BCM1480_SCD_PERF_CNT_CFG_0	    A_BCM1480_SCD_PERF_CNT_CFG0
+#define A_BCM1480_SCD_PERF_CNT_CFG1	    0x00100204C8
+#define A_BCM1480_SCD_PERF_CNT_CFG_1	    A_BCM1480_SCD_PERF_CNT_CFG1
 
-#define A_BCM1480_SCD_PERF_CNT_0            A_SCD_PERF_CNT_0
-#define A_BCM1480_SCD_PERF_CNT_1            A_SCD_PERF_CNT_1
-#define A_BCM1480_SCD_PERF_CNT_2            A_SCD_PERF_CNT_2
-#define A_BCM1480_SCD_PERF_CNT_3            A_SCD_PERF_CNT_3
+#define A_BCM1480_SCD_PERF_CNT_0	    A_SCD_PERF_CNT_0
+#define A_BCM1480_SCD_PERF_CNT_1	    A_SCD_PERF_CNT_1
+#define A_BCM1480_SCD_PERF_CNT_2	    A_SCD_PERF_CNT_2
+#define A_BCM1480_SCD_PERF_CNT_3	    A_SCD_PERF_CNT_3
 
-#define A_BCM1480_SCD_PERF_CNT_4            0x00100204F0
-#define A_BCM1480_SCD_PERF_CNT_5            0x00100204F8
-#define A_BCM1480_SCD_PERF_CNT_6            0x0010020500
-#define A_BCM1480_SCD_PERF_CNT_7            0x0010020508
+#define A_BCM1480_SCD_PERF_CNT_4	    0x00100204F0
+#define A_BCM1480_SCD_PERF_CNT_5	    0x00100204F8
+#define A_BCM1480_SCD_PERF_CNT_6	    0x0010020500
+#define A_BCM1480_SCD_PERF_CNT_7	    0x0010020508
 
 #define BCM1480_SCD_NUM_PERF_CNT 8
 #define BCM1480_SCD_PERF_CNT_SPACING 8
@@ -468,7 +468,7 @@
 
 /* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */
 
-#define A_BCM1480_BUS_ERR_STATUS_DEBUG      0x00100208D8
+#define A_BCM1480_BUS_ERR_STATUS_DEBUG	    0x00100208D8
 
 /*  *********************************************************************
     * System Debug Controller Registers (Section 19)
@@ -497,46 +497,46 @@
 #define BCM1480_HT_PORT_SPACING		   0x800
 #define A_BCM1480_HT_PORT_HEADER(x)	   (A_BCM1480_HT_PORT0_HEADER + ((x)*BCM1480_HT_PORT_SPACING))
 
-#define A_BCM1480_HT_PORT0_HEADER          0x00FE000000
-#define A_BCM1480_HT_PORT1_HEADER          0x00FE000800
-#define A_BCM1480_HT_PORT2_HEADER          0x00FE001000
-#define A_BCM1480_HT_TYPE00_HEADER         0x00FE002000
+#define A_BCM1480_HT_PORT0_HEADER	   0x00FE000000
+#define A_BCM1480_HT_PORT1_HEADER	   0x00FE000800
+#define A_BCM1480_HT_PORT2_HEADER	   0x00FE001000
+#define A_BCM1480_HT_TYPE00_HEADER	   0x00FE002000
 
 
 /*  *********************************************************************
     * Node Controller Registers (Section 9)
     ********************************************************************* */
 
-#define A_BCM1480_NC_BASE                   0x00DFBD0000
+#define A_BCM1480_NC_BASE		    0x00DFBD0000
 
-#define A_BCM1480_NC_RLD_FIELD              0x00DFBD0000
-#define A_BCM1480_NC_RLD_TRIGGER            0x00DFBD0020
-#define A_BCM1480_NC_RLD_BAD_ERROR          0x00DFBD0040
-#define A_BCM1480_NC_RLD_COR_ERROR          0x00DFBD0060
-#define A_BCM1480_NC_RLD_ECC_STATUS         0x00DFBD0080
-#define A_BCM1480_NC_RLD_WAY_ENABLE         0x00DFBD00A0
-#define A_BCM1480_NC_RLD_RANDOM_LFSR        0x00DFBD00C0
+#define A_BCM1480_NC_RLD_FIELD		    0x00DFBD0000
+#define A_BCM1480_NC_RLD_TRIGGER	    0x00DFBD0020
+#define A_BCM1480_NC_RLD_BAD_ERROR	    0x00DFBD0040
+#define A_BCM1480_NC_RLD_COR_ERROR	    0x00DFBD0060
+#define A_BCM1480_NC_RLD_ECC_STATUS	    0x00DFBD0080
+#define A_BCM1480_NC_RLD_WAY_ENABLE	    0x00DFBD00A0
+#define A_BCM1480_NC_RLD_RANDOM_LFSR	    0x00DFBD00C0
 
-#define A_BCM1480_NC_INTERRUPT_STATUS       0x00DFBD00E0
-#define A_BCM1480_NC_INTERRUPT_ENABLE       0x00DFBD0100
-#define A_BCM1480_NC_TIMEOUT_COUNTER        0x00DFBD0120
+#define A_BCM1480_NC_INTERRUPT_STATUS	    0x00DFBD00E0
+#define A_BCM1480_NC_INTERRUPT_ENABLE	    0x00DFBD0100
+#define A_BCM1480_NC_TIMEOUT_COUNTER	    0x00DFBD0120
 #define A_BCM1480_NC_TIMEOUT_COUNTER_SEL    0x00DFBD0140
 
-#define A_BCM1480_NC_CREDIT_STATUS_REG0     0x00DFBD0200
-#define A_BCM1480_NC_CREDIT_STATUS_REG1     0x00DFBD0220
-#define A_BCM1480_NC_CREDIT_STATUS_REG2     0x00DFBD0240
-#define A_BCM1480_NC_CREDIT_STATUS_REG3     0x00DFBD0260
-#define A_BCM1480_NC_CREDIT_STATUS_REG4     0x00DFBD0280
-#define A_BCM1480_NC_CREDIT_STATUS_REG5     0x00DFBD02A0
-#define A_BCM1480_NC_CREDIT_STATUS_REG6     0x00DFBD02C0
-#define A_BCM1480_NC_CREDIT_STATUS_REG7     0x00DFBD02E0
-#define A_BCM1480_NC_CREDIT_STATUS_REG8     0x00DFBD0300
-#define A_BCM1480_NC_CREDIT_STATUS_REG9     0x00DFBD0320
+#define A_BCM1480_NC_CREDIT_STATUS_REG0	    0x00DFBD0200
+#define A_BCM1480_NC_CREDIT_STATUS_REG1	    0x00DFBD0220
+#define A_BCM1480_NC_CREDIT_STATUS_REG2	    0x00DFBD0240
+#define A_BCM1480_NC_CREDIT_STATUS_REG3	    0x00DFBD0260
+#define A_BCM1480_NC_CREDIT_STATUS_REG4	    0x00DFBD0280
+#define A_BCM1480_NC_CREDIT_STATUS_REG5	    0x00DFBD02A0
+#define A_BCM1480_NC_CREDIT_STATUS_REG6	    0x00DFBD02C0
+#define A_BCM1480_NC_CREDIT_STATUS_REG7	    0x00DFBD02E0
+#define A_BCM1480_NC_CREDIT_STATUS_REG8	    0x00DFBD0300
+#define A_BCM1480_NC_CREDIT_STATUS_REG9	    0x00DFBD0320
 #define A_BCM1480_NC_CREDIT_STATUS_REG10    0x00DFBE0000
 #define A_BCM1480_NC_CREDIT_STATUS_REG11    0x00DFBE0020
 #define A_BCM1480_NC_CREDIT_STATUS_REG12    0x00DFBE0040
 
-#define A_BCM1480_NC_SR_TIMEOUT_COUNTER     0x00DFBE0060
+#define A_BCM1480_NC_SR_TIMEOUT_COUNTER	    0x00DFBE0060
 #define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080
 
 
@@ -544,43 +544,43 @@
     * H&R Block Configuration Registers (Section 12.4)
     ********************************************************************* */
 
-#define A_BCM1480_HR_BASE_0                 0x00DF820000
-#define A_BCM1480_HR_BASE_1                 0x00DF8A0000
-#define A_BCM1480_HR_BASE_2                 0x00DF920000
-#define BCM1480_HR_REGISTER_SPACING         0x80000
+#define A_BCM1480_HR_BASE_0		    0x00DF820000
+#define A_BCM1480_HR_BASE_1		    0x00DF8A0000
+#define A_BCM1480_HR_BASE_2		    0x00DF920000
+#define BCM1480_HR_REGISTER_SPACING	    0x80000
 
-#define A_BCM1480_HR_BASE(idx)              (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING))
-#define A_BCM1480_HR_REGISTER(idx, reg)      (A_BCM1480_HR_BASE(idx) + (reg))
+#define A_BCM1480_HR_BASE(idx)		    (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING))
+#define A_BCM1480_HR_REGISTER(idx, reg)	     (A_BCM1480_HR_BASE(idx) + (reg))
 
-#define R_BCM1480_HR_CFG                    0x0000000000
+#define R_BCM1480_HR_CFG		    0x0000000000
 
 #define R_BCM1480_HR_MAPPING		    0x0000010010
 
-#define BCM1480_HR_RULE_SPACING             0x0000000010
-#define BCM1480_HR_NUM_RULES                16
-#define BCM1480_HR_OP_OFFSET                0x0000000100
-#define BCM1480_HR_TYPE_OFFSET              0x0000000108
-#define R_BCM1480_HR_RULE_OP(idx)           (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
-#define R_BCM1480_HR_RULE_TYPE(idx)         (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+#define BCM1480_HR_RULE_SPACING		    0x0000000010
+#define BCM1480_HR_NUM_RULES		    16
+#define BCM1480_HR_OP_OFFSET		    0x0000000100
+#define BCM1480_HR_TYPE_OFFSET		    0x0000000108
+#define R_BCM1480_HR_RULE_OP(idx)	    (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+#define R_BCM1480_HR_RULE_TYPE(idx)	    (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
 
-#define BCM1480_HR_LEAF_SPACING             0x0000000010
-#define BCM1480_HR_NUM_LEAVES               10
-#define BCM1480_HR_LEAF_OFFSET              0x0000000300
-#define R_BCM1480_HR_HA_LEAF0(idx)          (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING))
+#define BCM1480_HR_LEAF_SPACING		    0x0000000010
+#define BCM1480_HR_NUM_LEAVES		    10
+#define BCM1480_HR_LEAF_OFFSET		    0x0000000300
+#define R_BCM1480_HR_HA_LEAF0(idx)	    (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING))
 
-#define R_BCM1480_HR_EX_LEAF0               0x00000003A0
+#define R_BCM1480_HR_EX_LEAF0		    0x00000003A0
 
-#define BCM1480_HR_PATH_SPACING             0x0000000010
-#define BCM1480_HR_NUM_PATHS                16
-#define BCM1480_HR_PATH_OFFSET              0x0000000600
-#define R_BCM1480_HR_PATH(idx)              (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING))
+#define BCM1480_HR_PATH_SPACING		    0x0000000010
+#define BCM1480_HR_NUM_PATHS		    16
+#define BCM1480_HR_PATH_OFFSET		    0x0000000600
+#define R_BCM1480_HR_PATH(idx)		    (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING))
 
-#define R_BCM1480_HR_PATH_DEFAULT           0x0000000700
+#define R_BCM1480_HR_PATH_DEFAULT	    0x0000000700
 
-#define BCM1480_HR_ROUTE_SPACING            8
-#define BCM1480_HR_NUM_ROUTES               512
-#define BCM1480_HR_ROUTE_OFFSET             0x0000001000
-#define R_BCM1480_HR_RT_WORD(idx)           (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING))
+#define BCM1480_HR_ROUTE_SPACING	    8
+#define BCM1480_HR_NUM_ROUTES		    512
+#define BCM1480_HR_ROUTE_OFFSET		    0x0000001000
+#define R_BCM1480_HR_RT_WORD(idx)	    (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING))
 
 
 /* checked to here - ehs */
@@ -588,55 +588,55 @@
     * Packet Manager DMA Registers (Section 12.5)
     ********************************************************************* */
 
-#define A_BCM1480_PM_BASE                   0x0010056000
+#define A_BCM1480_PM_BASE		    0x0010056000
 
-#define A_BCM1480_PMI_LCL_0                 0x0010058000
-#define A_BCM1480_PMO_LCL_0                 0x001005C000
-#define A_BCM1480_PMI_OFFSET_0              (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE)
-#define A_BCM1480_PMO_OFFSET_0              (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMI_LCL_0		    0x0010058000
+#define A_BCM1480_PMO_LCL_0		    0x001005C000
+#define A_BCM1480_PMI_OFFSET_0		    (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_OFFSET_0		    (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE)
 
-#define BCM1480_PM_LCL_REGISTER_SPACING     0x100
-#define BCM1480_PM_NUM_CHANNELS             32
+#define BCM1480_PM_LCL_REGISTER_SPACING	    0x100
+#define BCM1480_PM_NUM_CHANNELS		    32
 
-#define A_BCM1480_PMI_LCL_BASE(idx)             (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
-#define A_BCM1480_PMI_LCL_REGISTER(idx, reg)     (A_BCM1480_PMI_LCL_BASE(idx) + (reg))
-#define A_BCM1480_PMO_LCL_BASE(idx)             (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
-#define A_BCM1480_PMO_LCL_REGISTER(idx, reg)     (A_BCM1480_PMO_LCL_BASE(idx) + (reg))
+#define A_BCM1480_PMI_LCL_BASE(idx)		(A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMI_LCL_REGISTER(idx, reg)	 (A_BCM1480_PMI_LCL_BASE(idx) + (reg))
+#define A_BCM1480_PMO_LCL_BASE(idx)		(A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMO_LCL_REGISTER(idx, reg)	 (A_BCM1480_PMO_LCL_BASE(idx) + (reg))
 
-#define BCM1480_PM_INT_PACKING              8
-#define BCM1480_PM_INT_FUNCTION_SPACING     0x40
-#define BCM1480_PM_INT_NUM_FUNCTIONS        3
+#define BCM1480_PM_INT_PACKING		    8
+#define BCM1480_PM_INT_FUNCTION_SPACING	    0x40
+#define BCM1480_PM_INT_NUM_FUNCTIONS	    3
 
 /*
  * DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n)
  */
 
-#define R_BCM1480_PM_BASE_SIZE              0x0000000000
-#define R_BCM1480_PM_CNT                    0x0000000008
-#define R_BCM1480_PM_PFCNT                  0x0000000010
-#define R_BCM1480_PM_LAST                   0x0000000018
-#define R_BCM1480_PM_PFINDX                 0x0000000020
-#define R_BCM1480_PM_INT_WMK                0x0000000028
-#define R_BCM1480_PM_CONFIG0                0x0000000030
-#define R_BCM1480_PM_LOCALDEBUG             0x0000000078
-#define R_BCM1480_PM_CACHEABILITY           0x0000000080   /* PMI only */
-#define R_BCM1480_PM_INT_CNFG               0x0000000088
-#define R_BCM1480_PM_DESC_MERGE_TIMER       0x0000000090
-#define R_BCM1480_PM_LOCALDEBUG_PIB         0x00000000F8   /* PMI only */
-#define R_BCM1480_PM_LOCALDEBUG_POB         0x00000000F8   /* PMO only */
+#define R_BCM1480_PM_BASE_SIZE		    0x0000000000
+#define R_BCM1480_PM_CNT		    0x0000000008
+#define R_BCM1480_PM_PFCNT		    0x0000000010
+#define R_BCM1480_PM_LAST		    0x0000000018
+#define R_BCM1480_PM_PFINDX		    0x0000000020
+#define R_BCM1480_PM_INT_WMK		    0x0000000028
+#define R_BCM1480_PM_CONFIG0		    0x0000000030
+#define R_BCM1480_PM_LOCALDEBUG		    0x0000000078
+#define R_BCM1480_PM_CACHEABILITY	    0x0000000080   /* PMI only */
+#define R_BCM1480_PM_INT_CNFG		    0x0000000088
+#define R_BCM1480_PM_DESC_MERGE_TIMER	    0x0000000090
+#define R_BCM1480_PM_LOCALDEBUG_PIB	    0x00000000F8   /* PMI only */
+#define R_BCM1480_PM_LOCALDEBUG_POB	    0x00000000F8   /* PMO only */
 
 /*
  * Global Registers (Not Channelized)
  */
 
-#define A_BCM1480_PMI_GLB_0                 0x0010056000
-#define A_BCM1480_PMO_GLB_0                 0x0010057000
+#define A_BCM1480_PMI_GLB_0		    0x0010056000
+#define A_BCM1480_PMO_GLB_0		    0x0010057000
 
 /*
  * PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0
  */
 
-#define R_BCM1480_PM_PMO_MAPPING            0x00000008C8   /* PMO only */
+#define R_BCM1480_PM_PMO_MAPPING	    0x00000008C8   /* PMO only */
 
 #define A_BCM1480_PM_PMO_MAPPING	(A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING)
 
@@ -645,32 +645,32 @@
  */
 
 
-#define A_BCM1480_PMI_INT_0                 0x0010056800
-#define A_BCM1480_PMI_INT(q)                (A_BCM1480_PMI_INT_0 + ((q>>8)<<8))
-#define A_BCM1480_PMI_INT_OFFSET_0          (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE)
-#define A_BCM1480_PMO_INT_0                 0x0010057800
-#define A_BCM1480_PMO_INT(q)                (A_BCM1480_PMO_INT_0 + ((q>>8)<<8))
-#define A_BCM1480_PMO_INT_OFFSET_0          (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMI_INT_0		    0x0010056800
+#define A_BCM1480_PMI_INT(q)		    (A_BCM1480_PMI_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMI_INT_OFFSET_0	    (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_INT_0		    0x0010057800
+#define A_BCM1480_PMO_INT(q)		    (A_BCM1480_PMO_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMO_INT_OFFSET_0	    (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE)
 
 /*
  * Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0
  */
 
-#define R_BCM1480_PM_INT_ST                 0x0000000000
-#define R_BCM1480_PM_INT_MSK                0x0000000040
-#define R_BCM1480_PM_INT_CLR                0x0000000080
-#define R_BCM1480_PM_MRGD_INT               0x00000000C0
+#define R_BCM1480_PM_INT_ST		    0x0000000000
+#define R_BCM1480_PM_INT_MSK		    0x0000000040
+#define R_BCM1480_PM_INT_CLR		    0x0000000080
+#define R_BCM1480_PM_MRGD_INT		    0x00000000C0
 
 /*
  * Debug registers (global)
  */
 
 #define A_BCM1480_PM_GLOBALDEBUGMODE_PMI    0x0010056000
-#define A_BCM1480_PM_GLOBALDEBUG_PID        0x00100567F8
-#define A_BCM1480_PM_GLOBALDEBUG_PIB        0x0010056FF8
+#define A_BCM1480_PM_GLOBALDEBUG_PID	    0x00100567F8
+#define A_BCM1480_PM_GLOBALDEBUG_PIB	    0x0010056FF8
 #define A_BCM1480_PM_GLOBALDEBUGMODE_PMO    0x0010057000
-#define A_BCM1480_PM_GLOBALDEBUG_POD        0x00100577F8
-#define A_BCM1480_PM_GLOBALDEBUG_POB        0x0010057FF8
+#define A_BCM1480_PM_GLOBALDEBUG_POD	    0x00100577F8
+#define A_BCM1480_PM_GLOBALDEBUG_POB	    0x0010057FF8
 
 /*  *********************************************************************
     *  Switch performance counters
@@ -715,16 +715,16 @@
     *  High-Speed Port Registers (Section 13)
     ********************************************************************* */
 
-#define A_BCM1480_HSP_BASE_0                0x00DF810000
-#define A_BCM1480_HSP_BASE_1                0x00DF890000
-#define A_BCM1480_HSP_BASE_2                0x00DF910000
-#define BCM1480_HSP_REGISTER_SPACING        0x80000
+#define A_BCM1480_HSP_BASE_0		    0x00DF810000
+#define A_BCM1480_HSP_BASE_1		    0x00DF890000
+#define A_BCM1480_HSP_BASE_2		    0x00DF910000
+#define BCM1480_HSP_REGISTER_SPACING	    0x80000
 
-#define A_BCM1480_HSP_BASE(idx)             (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING))
+#define A_BCM1480_HSP_BASE(idx)		    (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING))
 #define A_BCM1480_HSP_REGISTER(idx, reg)     (A_BCM1480_HSP_BASE(idx) + (reg))
 
-#define R_BCM1480_HSP_RX_SPI4_CFG_0           0x0000000000
-#define R_BCM1480_HSP_RX_SPI4_CFG_1           0x0000000008
+#define R_BCM1480_HSP_RX_SPI4_CFG_0	      0x0000000000
+#define R_BCM1480_HSP_RX_SPI4_CFG_1	      0x0000000008
 #define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010
 #define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018
 #define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN     0x0000000020
@@ -733,34 +733,34 @@
 #define R_BCM1480_HSP_RX_SPI4_CALENDAR_0      0x0000000200
 #define R_BCM1480_HSP_RX_SPI4_CALENDAR_1      0x0000000208
 
-#define R_BCM1480_HSP_RX_PLL_CNFG             0x0000000800
-#define R_BCM1480_HSP_RX_CALIBRATION          0x0000000808
-#define R_BCM1480_HSP_RX_TEST                 0x0000000810
-#define R_BCM1480_HSP_RX_DIAG_DETAILS         0x0000000818
-#define R_BCM1480_HSP_RX_DIAG_CRC_0           0x0000000820
-#define R_BCM1480_HSP_RX_DIAG_CRC_1           0x0000000828
-#define R_BCM1480_HSP_RX_DIAG_HTCMD           0x0000000830
-#define R_BCM1480_HSP_RX_DIAG_PKTCTL          0x0000000838
+#define R_BCM1480_HSP_RX_PLL_CNFG	      0x0000000800
+#define R_BCM1480_HSP_RX_CALIBRATION	      0x0000000808
+#define R_BCM1480_HSP_RX_TEST		      0x0000000810
+#define R_BCM1480_HSP_RX_DIAG_DETAILS	      0x0000000818
+#define R_BCM1480_HSP_RX_DIAG_CRC_0	      0x0000000820
+#define R_BCM1480_HSP_RX_DIAG_CRC_1	      0x0000000828
+#define R_BCM1480_HSP_RX_DIAG_HTCMD	      0x0000000830
+#define R_BCM1480_HSP_RX_DIAG_PKTCTL	      0x0000000838
 
 #define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER   0x0000000870
 
-#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0       0x0000020020
-#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1       0x0000020028
-#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2       0x0000020030
-#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3       0x0000020038
-#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4       0x0000020040
-#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5       0x0000020048
-#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6       0x0000020050
-#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7       0x0000020058
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0	      0x0000020020
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1	      0x0000020028
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2	      0x0000020030
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3	      0x0000020038
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4	      0x0000020040
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5	      0x0000020048
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6	      0x0000020050
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7	      0x0000020058
 #define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx)    (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8*(idx))
 
 /* XXX Following registers were shuffled.  Renamed/renumbered per errata. */
-#define R_BCM1480_HSP_RX_HT_RAMALLOC_0      0x0000020078
-#define R_BCM1480_HSP_RX_HT_RAMALLOC_1      0x0000020080
-#define R_BCM1480_HSP_RX_HT_RAMALLOC_2      0x0000020088
-#define R_BCM1480_HSP_RX_HT_RAMALLOC_3      0x0000020090
-#define R_BCM1480_HSP_RX_HT_RAMALLOC_4      0x0000020098
-#define R_BCM1480_HSP_RX_HT_RAMALLOC_5      0x00000200A0
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_0	    0x0000020078
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_1	    0x0000020080
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_2	    0x0000020088
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_3	    0x0000020090
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_4	    0x0000020098
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_5	    0x00000200A0
 
 #define R_BCM1480_HSP_RX_SPI_WATERMARK_0      0x00000200B0
 #define R_BCM1480_HSP_RX_SPI_WATERMARK_1      0x00000200B8
@@ -772,30 +772,30 @@
 #define R_BCM1480_HSP_RX_SPI_WATERMARK_7      0x00000200E8
 #define R_BCM1480_HSP_RX_SPI_WATERMARK(idx)   (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8*(idx))
 
-#define R_BCM1480_HSP_RX_VIS_CMDQ_0           0x00000200F0
-#define R_BCM1480_HSP_RX_VIS_CMDQ_1           0x00000200F8
-#define R_BCM1480_HSP_RX_VIS_CMDQ_2           0x0000020100
-#define R_BCM1480_HSP_RX_RAM_READCTL          0x0000020108
-#define R_BCM1480_HSP_RX_RAM_READWINDOW       0x0000020110
-#define R_BCM1480_HSP_RX_RF_READCTL           0x0000020118
-#define R_BCM1480_HSP_RX_RF_READWINDOW        0x0000020120
+#define R_BCM1480_HSP_RX_VIS_CMDQ_0	      0x00000200F0
+#define R_BCM1480_HSP_RX_VIS_CMDQ_1	      0x00000200F8
+#define R_BCM1480_HSP_RX_VIS_CMDQ_2	      0x0000020100
+#define R_BCM1480_HSP_RX_RAM_READCTL	      0x0000020108
+#define R_BCM1480_HSP_RX_RAM_READWINDOW	      0x0000020110
+#define R_BCM1480_HSP_RX_RF_READCTL	      0x0000020118
+#define R_BCM1480_HSP_RX_RF_READWINDOW	      0x0000020120
 
-#define R_BCM1480_HSP_TX_SPI4_CFG_0           0x0000040000
-#define R_BCM1480_HSP_TX_SPI4_CFG_1           0x0000040008
+#define R_BCM1480_HSP_TX_SPI4_CFG_0	      0x0000040000
+#define R_BCM1480_HSP_TX_SPI4_CFG_1	      0x0000040008
 #define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT    0x0000040010
 
-#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0       0x0000040020
-#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1       0x0000040028
-#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2       0x0000040030
-#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3       0x0000040038
-#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4       0x0000040040
-#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5       0x0000040048
-#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6       0x0000040050
-#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7       0x0000040058
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0	      0x0000040020
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1	      0x0000040028
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2	      0x0000040030
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3	      0x0000040038
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4	      0x0000040040
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5	      0x0000040048
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6	      0x0000040050
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7	      0x0000040058
 #define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx)    (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8*(idx))
-#define R_BCM1480_HSP_TX_NPC_RAMALLOC         0x0000040078
-#define R_BCM1480_HSP_TX_RSP_RAMALLOC         0x0000040080
-#define R_BCM1480_HSP_TX_PC_RAMALLOC          0x0000040088
+#define R_BCM1480_HSP_TX_NPC_RAMALLOC	      0x0000040078
+#define R_BCM1480_HSP_TX_RSP_RAMALLOC	      0x0000040080
+#define R_BCM1480_HSP_TX_PC_RAMALLOC	      0x0000040088
 #define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0      0x0000040090
 #define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1      0x0000040098
 #define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2      0x00000400A0
@@ -805,37 +805,37 @@
 #define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2      0x00000400C0
 #define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3      0x00000400C8
 #define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx)   (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8*(idx))
-#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT       0x00000400D0
-#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT       0x00000400D8
+#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT	      0x00000400D0
+#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT	      0x00000400D8
 
 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0      0x00000400E0
 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1      0x00000400E8
 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2      0x00000400F0
 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3      0x00000400F8
 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx)   (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8*(idx))
-#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT       0x0000040100
-#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT       0x0000040108
+#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT	      0x0000040100
+#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT	      0x0000040108
 
 #define R_BCM1480_HSP_TX_SPI4_CALENDAR_0      0x0000040200
 #define R_BCM1480_HSP_TX_SPI4_CALENDAR_1      0x0000040208
 
-#define R_BCM1480_HSP_TX_PLL_CNFG             0x0000040800
-#define R_BCM1480_HSP_TX_CALIBRATION          0x0000040808
-#define R_BCM1480_HSP_TX_TEST                 0x0000040810
+#define R_BCM1480_HSP_TX_PLL_CNFG	      0x0000040800
+#define R_BCM1480_HSP_TX_CALIBRATION	      0x0000040808
+#define R_BCM1480_HSP_TX_TEST		      0x0000040810
 
-#define R_BCM1480_HSP_TX_VIS_CMDQ_0           0x0000040840
-#define R_BCM1480_HSP_TX_VIS_CMDQ_1           0x0000040848
-#define R_BCM1480_HSP_TX_VIS_CMDQ_2           0x0000040850
-#define R_BCM1480_HSP_TX_RAM_READCTL          0x0000040860
-#define R_BCM1480_HSP_TX_RAM_READWINDOW       0x0000040868
-#define R_BCM1480_HSP_TX_RF_READCTL           0x0000040870
-#define R_BCM1480_HSP_TX_RF_READWINDOW        0x0000040878
+#define R_BCM1480_HSP_TX_VIS_CMDQ_0	      0x0000040840
+#define R_BCM1480_HSP_TX_VIS_CMDQ_1	      0x0000040848
+#define R_BCM1480_HSP_TX_VIS_CMDQ_2	      0x0000040850
+#define R_BCM1480_HSP_TX_RAM_READCTL	      0x0000040860
+#define R_BCM1480_HSP_TX_RAM_READWINDOW	      0x0000040868
+#define R_BCM1480_HSP_TX_RF_READCTL	      0x0000040870
+#define R_BCM1480_HSP_TX_RF_READWINDOW	      0x0000040878
 
 #define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880
 #define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN     0x0000040888
 
 #define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400
-#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x)  (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x))
+#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x)	(R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x))
 
 
 
@@ -843,60 +843,60 @@
     *  Physical Address Map (Table 10 and Figure 7)
     ********************************************************************* */
 
-#define A_BCM1480_PHYS_MEMORY_0                 _SB_MAKE64(0x0000000000)
-#define A_BCM1480_PHYS_MEMORY_SIZE              _SB_MAKE64((256*1024*1024))
-#define A_BCM1480_PHYS_SYSTEM_CTL               _SB_MAKE64(0x0010000000)
-#define A_BCM1480_PHYS_IO_SYSTEM                _SB_MAKE64(0x0010060000)
-#define A_BCM1480_PHYS_GENBUS                   _SB_MAKE64(0x0010090000)
-#define A_BCM1480_PHYS_GENBUS_END               _SB_MAKE64(0x0028000000)
-#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES     _SB_MAKE64(0x0028000000)
-#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES     _SB_MAKE64(0x0029000000)
-#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES       _SB_MAKE64(0x002C000000)
-#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES      _SB_MAKE64(0x002E000000)
-#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES     _SB_MAKE64(0x002F000000)
-#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES      _SB_MAKE64(0x0030000000)
-#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES       _SB_MAKE64(0x0040000000)
-#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS        _SB_MAKE64(0x0060000000)
-#define A_BCM1480_PHYS_MEMORY_1                 _SB_MAKE64(0x0080000000)
-#define A_BCM1480_PHYS_MEMORY_2                 _SB_MAKE64(0x0090000000)
-#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS      _SB_MAKE64(0x00A8000000)
-#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS      _SB_MAKE64(0x00A9000000)
-#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS        _SB_MAKE64(0x00AC000000)
-#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS       _SB_MAKE64(0x00AE000000)
-#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS      _SB_MAKE64(0x00AF000000)
-#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS       _SB_MAKE64(0x00B0000000)
-#define A_BCM1480_PHYS_MEMORY_3                 _SB_MAKE64(0x00C0000000)
-#define A_BCM1480_PHYS_L2_CACHE_TEST            _SB_MAKE64(0x00D0000000)
-#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES   _SB_MAKE64(0x00D8000000)
-#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES        _SB_MAKE64(0x00DC000000)
-#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES       _SB_MAKE64(0x00DE000000)
-#define A_BCM1480_PHYS_HS_SUBSYS                _SB_MAKE64(0x00DF000000)
-#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS    _SB_MAKE64(0x00F8000000)
-#define A_BCM1480_PHYS_HT_IO_MATCH_BITS         _SB_MAKE64(0x00FC000000)
-#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS        _SB_MAKE64(0x00FE000000)
-#define A_BCM1480_PHYS_MEMORY_EXP               _SB_MAKE64(0x0100000000)
-#define A_BCM1480_PHYS_MEMORY_EXP_SIZE          _SB_MAKE64((508*1024*1024*1024))
-#define A_BCM1480_PHYS_PCI_UPPER                _SB_MAKE64(0x1000000000)
-#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES     _SB_MAKE64(0x2000000000)
-#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS      _SB_MAKE64(0x3000000000)
-#define A_BCM1480_PHYS_HT_NODE_ALIAS            _SB_MAKE64(0x4000000000)
-#define A_BCM1480_PHYS_HT_FULLACCESS            _SB_MAKE64(0xF000000000)
+#define A_BCM1480_PHYS_MEMORY_0			_SB_MAKE64(0x0000000000)
+#define A_BCM1480_PHYS_MEMORY_SIZE		_SB_MAKE64((256*1024*1024))
+#define A_BCM1480_PHYS_SYSTEM_CTL		_SB_MAKE64(0x0010000000)
+#define A_BCM1480_PHYS_IO_SYSTEM		_SB_MAKE64(0x0010060000)
+#define A_BCM1480_PHYS_GENBUS			_SB_MAKE64(0x0010090000)
+#define A_BCM1480_PHYS_GENBUS_END		_SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES	_SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES	_SB_MAKE64(0x0029000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES	_SB_MAKE64(0x002C000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES	_SB_MAKE64(0x002E000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES	_SB_MAKE64(0x002F000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES	_SB_MAKE64(0x0030000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES	_SB_MAKE64(0x0040000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS	_SB_MAKE64(0x0060000000)
+#define A_BCM1480_PHYS_MEMORY_1			_SB_MAKE64(0x0080000000)
+#define A_BCM1480_PHYS_MEMORY_2			_SB_MAKE64(0x0090000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS	_SB_MAKE64(0x00A8000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS	_SB_MAKE64(0x00A9000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS	_SB_MAKE64(0x00AC000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS	_SB_MAKE64(0x00AE000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS	_SB_MAKE64(0x00AF000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS	_SB_MAKE64(0x00B0000000)
+#define A_BCM1480_PHYS_MEMORY_3			_SB_MAKE64(0x00C0000000)
+#define A_BCM1480_PHYS_L2_CACHE_TEST		_SB_MAKE64(0x00D0000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES	_SB_MAKE64(0x00D8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES	_SB_MAKE64(0x00DC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES	_SB_MAKE64(0x00DE000000)
+#define A_BCM1480_PHYS_HS_SUBSYS		_SB_MAKE64(0x00DF000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS	_SB_MAKE64(0x00F8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BITS		_SB_MAKE64(0x00FC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS	_SB_MAKE64(0x00FE000000)
+#define A_BCM1480_PHYS_MEMORY_EXP		_SB_MAKE64(0x0100000000)
+#define A_BCM1480_PHYS_MEMORY_EXP_SIZE		_SB_MAKE64((508*1024*1024*1024))
+#define A_BCM1480_PHYS_PCI_UPPER		_SB_MAKE64(0x1000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES	_SB_MAKE64(0x2000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS	_SB_MAKE64(0x3000000000)
+#define A_BCM1480_PHYS_HT_NODE_ALIAS		_SB_MAKE64(0x4000000000)
+#define A_BCM1480_PHYS_HT_FULLACCESS		_SB_MAKE64(0xF000000000)
 
 
 /*  *********************************************************************
     *  L2 Cache as RAM (Table 54)
     ********************************************************************* */
 
-#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE         _SB_MAKE64(0x0000020000)
-#define BCM1480_PHYS_L2CACHE_NUM_WAYS           8
-#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE       _SB_MAKE64(0x0000100000)
-#define A_BCM1480_PHYS_L2CACHE_WAY0             _SB_MAKE64(0x00D0300000)
-#define A_BCM1480_PHYS_L2CACHE_WAY1             _SB_MAKE64(0x00D0320000)
-#define A_BCM1480_PHYS_L2CACHE_WAY2             _SB_MAKE64(0x00D0340000)
-#define A_BCM1480_PHYS_L2CACHE_WAY3             _SB_MAKE64(0x00D0360000)
-#define A_BCM1480_PHYS_L2CACHE_WAY4             _SB_MAKE64(0x00D0380000)
-#define A_BCM1480_PHYS_L2CACHE_WAY5             _SB_MAKE64(0x00D03A0000)
-#define A_BCM1480_PHYS_L2CACHE_WAY6             _SB_MAKE64(0x00D03C0000)
-#define A_BCM1480_PHYS_L2CACHE_WAY7             _SB_MAKE64(0x00D03E0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE		_SB_MAKE64(0x0000020000)
+#define BCM1480_PHYS_L2CACHE_NUM_WAYS		8
+#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE	_SB_MAKE64(0x0000100000)
+#define A_BCM1480_PHYS_L2CACHE_WAY0		_SB_MAKE64(0x00D0300000)
+#define A_BCM1480_PHYS_L2CACHE_WAY1		_SB_MAKE64(0x00D0320000)
+#define A_BCM1480_PHYS_L2CACHE_WAY2		_SB_MAKE64(0x00D0340000)
+#define A_BCM1480_PHYS_L2CACHE_WAY3		_SB_MAKE64(0x00D0360000)
+#define A_BCM1480_PHYS_L2CACHE_WAY4		_SB_MAKE64(0x00D0380000)
+#define A_BCM1480_PHYS_L2CACHE_WAY5		_SB_MAKE64(0x00D03A0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY6		_SB_MAKE64(0x00D03C0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY7		_SB_MAKE64(0x00D03E0000)
 
 #endif /* _BCM1480_REGS_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_scd.h b/arch/mips/include/asm/sibyte/bcm1480_scd.h
index 2af3706..8a1e2b0 100644
--- a/arch/mips/include/asm/sibyte/bcm1480_scd.h
+++ b/arch/mips/include/asm/sibyte/bcm1480_scd.h
@@ -1,7 +1,7 @@
 /*  *********************************************************************
     *  BCM1280/BCM1400 Board Support Package
     *
-    *  SCD Constants and Macros                     File: bcm1480_scd.h
+    *  SCD Constants and Macros			    File: bcm1480_scd.h
     *
     *  This module contains constants and macros useful for
     *  manipulating the System Control and Debug module.
@@ -74,11 +74,11 @@
  * New part definitions
  */
 
-#define K_SYS_PART_BCM1480          0x1406
-#define K_SYS_PART_BCM1280          0x1206
-#define K_SYS_PART_BCM1455          0x1407
-#define K_SYS_PART_BCM1255          0x1257
-#define K_SYS_PART_BCM1158          0x1156
+#define K_SYS_PART_BCM1480	    0x1406
+#define K_SYS_PART_BCM1280	    0x1206
+#define K_SYS_PART_BCM1455	    0x1407
+#define K_SYS_PART_BCM1255	    0x1257
+#define K_SYS_PART_BCM1158	    0x1156
 
 /*
  * Manufacturing Information Register (Table 14)
@@ -91,73 +91,73 @@
  * Entire register is different from 1250, all new constants below
  */
 
-#define M_BCM1480_SYS_RESERVED0             _SB_MAKEMASK1(0)
-#define M_BCM1480_SYS_HT_MINRSTCNT          _SB_MAKEMASK1(1)
-#define M_BCM1480_SYS_RESERVED2             _SB_MAKEMASK1(2)
-#define M_BCM1480_SYS_RESERVED3             _SB_MAKEMASK1(3)
-#define M_BCM1480_SYS_RESERVED4             _SB_MAKEMASK1(4)
-#define M_BCM1480_SYS_IOB_DIV               _SB_MAKEMASK1(5)
+#define M_BCM1480_SYS_RESERVED0		    _SB_MAKEMASK1(0)
+#define M_BCM1480_SYS_HT_MINRSTCNT	    _SB_MAKEMASK1(1)
+#define M_BCM1480_SYS_RESERVED2		    _SB_MAKEMASK1(2)
+#define M_BCM1480_SYS_RESERVED3		    _SB_MAKEMASK1(3)
+#define M_BCM1480_SYS_RESERVED4		    _SB_MAKEMASK1(4)
+#define M_BCM1480_SYS_IOB_DIV		    _SB_MAKEMASK1(5)
 
-#define S_BCM1480_SYS_PLL_DIV               _SB_MAKE64(6)
-#define M_BCM1480_SYS_PLL_DIV               _SB_MAKEMASK(5, S_BCM1480_SYS_PLL_DIV)
-#define V_BCM1480_SYS_PLL_DIV(x)            _SB_MAKEVALUE(x, S_BCM1480_SYS_PLL_DIV)
-#define G_BCM1480_SYS_PLL_DIV(x)            _SB_GETVALUE(x, S_BCM1480_SYS_PLL_DIV, M_BCM1480_SYS_PLL_DIV)
+#define S_BCM1480_SYS_PLL_DIV		    _SB_MAKE64(6)
+#define M_BCM1480_SYS_PLL_DIV		    _SB_MAKEMASK(5, S_BCM1480_SYS_PLL_DIV)
+#define V_BCM1480_SYS_PLL_DIV(x)	    _SB_MAKEVALUE(x, S_BCM1480_SYS_PLL_DIV)
+#define G_BCM1480_SYS_PLL_DIV(x)	    _SB_GETVALUE(x, S_BCM1480_SYS_PLL_DIV, M_BCM1480_SYS_PLL_DIV)
 
-#define S_BCM1480_SYS_SW_DIV                _SB_MAKE64(11)
-#define M_BCM1480_SYS_SW_DIV                _SB_MAKEMASK(5, S_BCM1480_SYS_SW_DIV)
-#define V_BCM1480_SYS_SW_DIV(x)             _SB_MAKEVALUE(x, S_BCM1480_SYS_SW_DIV)
-#define G_BCM1480_SYS_SW_DIV(x)             _SB_GETVALUE(x, S_BCM1480_SYS_SW_DIV, M_BCM1480_SYS_SW_DIV)
+#define S_BCM1480_SYS_SW_DIV		    _SB_MAKE64(11)
+#define M_BCM1480_SYS_SW_DIV		    _SB_MAKEMASK(5, S_BCM1480_SYS_SW_DIV)
+#define V_BCM1480_SYS_SW_DIV(x)		    _SB_MAKEVALUE(x, S_BCM1480_SYS_SW_DIV)
+#define G_BCM1480_SYS_SW_DIV(x)		    _SB_GETVALUE(x, S_BCM1480_SYS_SW_DIV, M_BCM1480_SYS_SW_DIV)
 
-#define M_BCM1480_SYS_PCMCIA_ENABLE         _SB_MAKEMASK1(16)
-#define M_BCM1480_SYS_DUART1_ENABLE         _SB_MAKEMASK1(17)
+#define M_BCM1480_SYS_PCMCIA_ENABLE	    _SB_MAKEMASK1(16)
+#define M_BCM1480_SYS_DUART1_ENABLE	    _SB_MAKEMASK1(17)
 
-#define S_BCM1480_SYS_BOOT_MODE             _SB_MAKE64(18)
-#define M_BCM1480_SYS_BOOT_MODE             _SB_MAKEMASK(2, S_BCM1480_SYS_BOOT_MODE)
-#define V_BCM1480_SYS_BOOT_MODE(x)          _SB_MAKEVALUE(x, S_BCM1480_SYS_BOOT_MODE)
-#define G_BCM1480_SYS_BOOT_MODE(x)          _SB_GETVALUE(x, S_BCM1480_SYS_BOOT_MODE, M_BCM1480_SYS_BOOT_MODE)
-#define K_BCM1480_SYS_BOOT_MODE_ROM32       0
-#define K_BCM1480_SYS_BOOT_MODE_ROM8        1
+#define S_BCM1480_SYS_BOOT_MODE		    _SB_MAKE64(18)
+#define M_BCM1480_SYS_BOOT_MODE		    _SB_MAKEMASK(2, S_BCM1480_SYS_BOOT_MODE)
+#define V_BCM1480_SYS_BOOT_MODE(x)	    _SB_MAKEVALUE(x, S_BCM1480_SYS_BOOT_MODE)
+#define G_BCM1480_SYS_BOOT_MODE(x)	    _SB_GETVALUE(x, S_BCM1480_SYS_BOOT_MODE, M_BCM1480_SYS_BOOT_MODE)
+#define K_BCM1480_SYS_BOOT_MODE_ROM32	    0
+#define K_BCM1480_SYS_BOOT_MODE_ROM8	    1
 #define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2
 #define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG   3
-#define M_BCM1480_SYS_BOOT_MODE_SMBUS       _SB_MAKEMASK1(19)
+#define M_BCM1480_SYS_BOOT_MODE_SMBUS	    _SB_MAKEMASK1(19)
 
-#define M_BCM1480_SYS_PCI_HOST              _SB_MAKEMASK1(20)
-#define M_BCM1480_SYS_PCI_ARBITER           _SB_MAKEMASK1(21)
-#define M_BCM1480_SYS_BIG_ENDIAN            _SB_MAKEMASK1(22)
-#define M_BCM1480_SYS_GENCLK_EN             _SB_MAKEMASK1(23)
-#define M_BCM1480_SYS_GEN_PARITY_EN         _SB_MAKEMASK1(24)
-#define M_BCM1480_SYS_RESERVED25            _SB_MAKEMASK1(25)
+#define M_BCM1480_SYS_PCI_HOST		    _SB_MAKEMASK1(20)
+#define M_BCM1480_SYS_PCI_ARBITER	    _SB_MAKEMASK1(21)
+#define M_BCM1480_SYS_BIG_ENDIAN	    _SB_MAKEMASK1(22)
+#define M_BCM1480_SYS_GENCLK_EN		    _SB_MAKEMASK1(23)
+#define M_BCM1480_SYS_GEN_PARITY_EN	    _SB_MAKEMASK1(24)
+#define M_BCM1480_SYS_RESERVED25	    _SB_MAKEMASK1(25)
 
-#define S_BCM1480_SYS_CONFIG                26
-#define M_BCM1480_SYS_CONFIG                _SB_MAKEMASK(6, S_BCM1480_SYS_CONFIG)
-#define V_BCM1480_SYS_CONFIG(x)             _SB_MAKEVALUE(x, S_BCM1480_SYS_CONFIG)
-#define G_BCM1480_SYS_CONFIG(x)             _SB_GETVALUE(x, S_BCM1480_SYS_CONFIG, M_BCM1480_SYS_CONFIG)
+#define S_BCM1480_SYS_CONFIG		    26
+#define M_BCM1480_SYS_CONFIG		    _SB_MAKEMASK(6, S_BCM1480_SYS_CONFIG)
+#define V_BCM1480_SYS_CONFIG(x)		    _SB_MAKEVALUE(x, S_BCM1480_SYS_CONFIG)
+#define G_BCM1480_SYS_CONFIG(x)		    _SB_GETVALUE(x, S_BCM1480_SYS_CONFIG, M_BCM1480_SYS_CONFIG)
 
-#define M_BCM1480_SYS_RESERVED32            _SB_MAKEMASK(32, 15)
+#define M_BCM1480_SYS_RESERVED32	    _SB_MAKEMASK(32, 15)
 
-#define S_BCM1480_SYS_NODEID                47
-#define M_BCM1480_SYS_NODEID                _SB_MAKEMASK(4, S_BCM1480_SYS_NODEID)
-#define V_BCM1480_SYS_NODEID(x)             _SB_MAKEVALUE(x, S_BCM1480_SYS_NODEID)
-#define G_BCM1480_SYS_NODEID(x)             _SB_GETVALUE(x, S_BCM1480_SYS_NODEID, M_BCM1480_SYS_NODEID)
+#define S_BCM1480_SYS_NODEID		    47
+#define M_BCM1480_SYS_NODEID		    _SB_MAKEMASK(4, S_BCM1480_SYS_NODEID)
+#define V_BCM1480_SYS_NODEID(x)		    _SB_MAKEVALUE(x, S_BCM1480_SYS_NODEID)
+#define G_BCM1480_SYS_NODEID(x)		    _SB_GETVALUE(x, S_BCM1480_SYS_NODEID, M_BCM1480_SYS_NODEID)
 
-#define M_BCM1480_SYS_CCNUMA_EN             _SB_MAKEMASK1(51)
-#define M_BCM1480_SYS_CPU_RESET_0           _SB_MAKEMASK1(52)
-#define M_BCM1480_SYS_CPU_RESET_1           _SB_MAKEMASK1(53)
-#define M_BCM1480_SYS_CPU_RESET_2           _SB_MAKEMASK1(54)
-#define M_BCM1480_SYS_CPU_RESET_3           _SB_MAKEMASK1(55)
-#define S_BCM1480_SYS_DISABLECPU0           56
-#define M_BCM1480_SYS_DISABLECPU0           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0)
-#define S_BCM1480_SYS_DISABLECPU1           57
-#define M_BCM1480_SYS_DISABLECPU1           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1)
-#define S_BCM1480_SYS_DISABLECPU2           58
-#define M_BCM1480_SYS_DISABLECPU2           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2)
-#define S_BCM1480_SYS_DISABLECPU3           59
-#define M_BCM1480_SYS_DISABLECPU3           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3)
+#define M_BCM1480_SYS_CCNUMA_EN		    _SB_MAKEMASK1(51)
+#define M_BCM1480_SYS_CPU_RESET_0	    _SB_MAKEMASK1(52)
+#define M_BCM1480_SYS_CPU_RESET_1	    _SB_MAKEMASK1(53)
+#define M_BCM1480_SYS_CPU_RESET_2	    _SB_MAKEMASK1(54)
+#define M_BCM1480_SYS_CPU_RESET_3	    _SB_MAKEMASK1(55)
+#define S_BCM1480_SYS_DISABLECPU0	    56
+#define M_BCM1480_SYS_DISABLECPU0	    _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0)
+#define S_BCM1480_SYS_DISABLECPU1	    57
+#define M_BCM1480_SYS_DISABLECPU1	    _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1)
+#define S_BCM1480_SYS_DISABLECPU2	    58
+#define M_BCM1480_SYS_DISABLECPU2	    _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2)
+#define S_BCM1480_SYS_DISABLECPU3	    59
+#define M_BCM1480_SYS_DISABLECPU3	    _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3)
 
-#define M_BCM1480_SYS_SB_SOFTRES            _SB_MAKEMASK1(60)
-#define M_BCM1480_SYS_EXT_RESET             _SB_MAKEMASK1(61)
-#define M_BCM1480_SYS_SYSTEM_RESET          _SB_MAKEMASK1(62)
-#define M_BCM1480_SYS_SW_FLAG               _SB_MAKEMASK1(63)
+#define M_BCM1480_SYS_SB_SOFTRES	    _SB_MAKEMASK1(60)
+#define M_BCM1480_SYS_EXT_RESET		    _SB_MAKEMASK1(61)
+#define M_BCM1480_SYS_SYSTEM_RESET	    _SB_MAKEMASK1(62)
+#define M_BCM1480_SYS_SW_FLAG		    _SB_MAKEMASK1(63)
 
 /*
  * Scratch Register (Table 16)
@@ -193,23 +193,23 @@
  * Registers: SCD_WDOG_CFG_x
  */
 
-#define M_BCM1480_SCD_WDOG_ENABLE           _SB_MAKEMASK1(0)
+#define M_BCM1480_SCD_WDOG_ENABLE	    _SB_MAKEMASK1(0)
 
-#define S_BCM1480_SCD_WDOG_RESET_TYPE       2
-#define M_BCM1480_SCD_WDOG_RESET_TYPE       _SB_MAKEMASK(5, S_BCM1480_SCD_WDOG_RESET_TYPE)
+#define S_BCM1480_SCD_WDOG_RESET_TYPE	    2
+#define M_BCM1480_SCD_WDOG_RESET_TYPE	    _SB_MAKEMASK(5, S_BCM1480_SCD_WDOG_RESET_TYPE)
 #define V_BCM1480_SCD_WDOG_RESET_TYPE(x)    _SB_MAKEVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE)
 #define G_BCM1480_SCD_WDOG_RESET_TYPE(x)    _SB_GETVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE, M_BCM1480_SCD_WDOG_RESET_TYPE)
 
-#define K_BCM1480_SCD_WDOG_RESET_FULL       0	/* actually, (x & 1) == 0  */
-#define K_BCM1480_SCD_WDOG_RESET_SOFT       1
-#define K_BCM1480_SCD_WDOG_RESET_CPU0       3
-#define K_BCM1480_SCD_WDOG_RESET_CPU1       5
-#define K_BCM1480_SCD_WDOG_RESET_CPU2       9
-#define K_BCM1480_SCD_WDOG_RESET_CPU3       17
+#define K_BCM1480_SCD_WDOG_RESET_FULL	    0	/* actually, (x & 1) == 0  */
+#define K_BCM1480_SCD_WDOG_RESET_SOFT	    1
+#define K_BCM1480_SCD_WDOG_RESET_CPU0	    3
+#define K_BCM1480_SCD_WDOG_RESET_CPU1	    5
+#define K_BCM1480_SCD_WDOG_RESET_CPU2	    9
+#define K_BCM1480_SCD_WDOG_RESET_CPU3	    17
 #define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS   31
 
 
-#define M_BCM1480_SCD_WDOG_HAS_RESET        _SB_MAKEMASK1(8)
+#define M_BCM1480_SCD_WDOG_HAS_RESET	    _SB_MAKEMASK1(8)
 
 /*
  * General Timer Initial Count Registers (Table 26)
@@ -243,32 +243,32 @@
  * The clear/enable bits are in different locations on the 1250 and 1480.
  */
 
-#define S_SPC_CFG_SRC4              32
-#define M_SPC_CFG_SRC4              _SB_MAKEMASK(8, S_SPC_CFG_SRC4)
-#define V_SPC_CFG_SRC4(x)           _SB_MAKEVALUE(x, S_SPC_CFG_SRC4)
-#define G_SPC_CFG_SRC4(x)           _SB_GETVALUE(x, S_SPC_CFG_SRC4, M_SPC_CFG_SRC4)
+#define S_SPC_CFG_SRC4		    32
+#define M_SPC_CFG_SRC4		    _SB_MAKEMASK(8, S_SPC_CFG_SRC4)
+#define V_SPC_CFG_SRC4(x)	    _SB_MAKEVALUE(x, S_SPC_CFG_SRC4)
+#define G_SPC_CFG_SRC4(x)	    _SB_GETVALUE(x, S_SPC_CFG_SRC4, M_SPC_CFG_SRC4)
 
-#define S_SPC_CFG_SRC5              40
-#define M_SPC_CFG_SRC5              _SB_MAKEMASK(8, S_SPC_CFG_SRC5)
-#define V_SPC_CFG_SRC5(x)           _SB_MAKEVALUE(x, S_SPC_CFG_SRC5)
-#define G_SPC_CFG_SRC5(x)           _SB_GETVALUE(x, S_SPC_CFG_SRC5, M_SPC_CFG_SRC5)
+#define S_SPC_CFG_SRC5		    40
+#define M_SPC_CFG_SRC5		    _SB_MAKEMASK(8, S_SPC_CFG_SRC5)
+#define V_SPC_CFG_SRC5(x)	    _SB_MAKEVALUE(x, S_SPC_CFG_SRC5)
+#define G_SPC_CFG_SRC5(x)	    _SB_GETVALUE(x, S_SPC_CFG_SRC5, M_SPC_CFG_SRC5)
 
-#define S_SPC_CFG_SRC6              48
-#define M_SPC_CFG_SRC6              _SB_MAKEMASK(8, S_SPC_CFG_SRC6)
-#define V_SPC_CFG_SRC6(x)           _SB_MAKEVALUE(x, S_SPC_CFG_SRC6)
-#define G_SPC_CFG_SRC6(x)           _SB_GETVALUE(x, S_SPC_CFG_SRC6, M_SPC_CFG_SRC6)
+#define S_SPC_CFG_SRC6		    48
+#define M_SPC_CFG_SRC6		    _SB_MAKEMASK(8, S_SPC_CFG_SRC6)
+#define V_SPC_CFG_SRC6(x)	    _SB_MAKEVALUE(x, S_SPC_CFG_SRC6)
+#define G_SPC_CFG_SRC6(x)	    _SB_GETVALUE(x, S_SPC_CFG_SRC6, M_SPC_CFG_SRC6)
 
-#define S_SPC_CFG_SRC7              56
-#define M_SPC_CFG_SRC7              _SB_MAKEMASK(8, S_SPC_CFG_SRC7)
-#define V_SPC_CFG_SRC7(x)           _SB_MAKEVALUE(x, S_SPC_CFG_SRC7)
-#define G_SPC_CFG_SRC7(x)           _SB_GETVALUE(x, S_SPC_CFG_SRC7, M_SPC_CFG_SRC7)
+#define S_SPC_CFG_SRC7		    56
+#define M_SPC_CFG_SRC7		    _SB_MAKEMASK(8, S_SPC_CFG_SRC7)
+#define V_SPC_CFG_SRC7(x)	    _SB_MAKEVALUE(x, S_SPC_CFG_SRC7)
+#define G_SPC_CFG_SRC7(x)	    _SB_GETVALUE(x, S_SPC_CFG_SRC7, M_SPC_CFG_SRC7)
 
 /*
  * System Performance Counter Control Register (Table 32)
  * Register: PERF_CNT_CFG_1
  * BCM1480 specific
  */
-#define M_BCM1480_SPC_CFG_CLEAR     _SB_MAKEMASK1(0)
+#define M_BCM1480_SPC_CFG_CLEAR	    _SB_MAKEMASK1(0)
 #define M_BCM1480_SPC_CFG_ENABLE    _SB_MAKEMASK1(1)
 #if SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_SPC_CFG_CLEAR			M_BCM1480_SPC_CFG_CLEAR
@@ -280,12 +280,12 @@
  * Registers: PERF_CNT_x
  */
 
-#define S_BCM1480_SPC_CNT_COUNT             0
-#define M_BCM1480_SPC_CNT_COUNT             _SB_MAKEMASK(40, S_BCM1480_SPC_CNT_COUNT)
-#define V_BCM1480_SPC_CNT_COUNT(x)          _SB_MAKEVALUE(x, S_BCM1480_SPC_CNT_COUNT)
-#define G_BCM1480_SPC_CNT_COUNT(x)          _SB_GETVALUE(x, S_BCM1480_SPC_CNT_COUNT, M_BCM1480_SPC_CNT_COUNT)
+#define S_BCM1480_SPC_CNT_COUNT		    0
+#define M_BCM1480_SPC_CNT_COUNT		    _SB_MAKEMASK(40, S_BCM1480_SPC_CNT_COUNT)
+#define V_BCM1480_SPC_CNT_COUNT(x)	    _SB_MAKEVALUE(x, S_BCM1480_SPC_CNT_COUNT)
+#define G_BCM1480_SPC_CNT_COUNT(x)	    _SB_GETVALUE(x, S_BCM1480_SPC_CNT_COUNT, M_BCM1480_SPC_CNT_COUNT)
 
-#define M_BCM1480_SPC_CNT_OFLOW             _SB_MAKEMASK1(40)
+#define M_BCM1480_SPC_CNT_OFLOW		    _SB_MAKEMASK1(40)
 
 
 /*
@@ -325,45 +325,45 @@
 #define M_BCM1480_ATRAP_INDEX		  _SB_MAKEMASK(4, 0)
 #define M_BCM1480_ATRAP_ADDRESS		  _SB_MAKEMASK(40, 0)
 
-#define S_BCM1480_ATRAP_CFG_CNT            0
-#define M_BCM1480_ATRAP_CFG_CNT            _SB_MAKEMASK(3, S_BCM1480_ATRAP_CFG_CNT)
-#define V_BCM1480_ATRAP_CFG_CNT(x)         _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CNT)
-#define G_BCM1480_ATRAP_CFG_CNT(x)         _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CNT, M_BCM1480_ATRAP_CFG_CNT)
+#define S_BCM1480_ATRAP_CFG_CNT		   0
+#define M_BCM1480_ATRAP_CFG_CNT		   _SB_MAKEMASK(3, S_BCM1480_ATRAP_CFG_CNT)
+#define V_BCM1480_ATRAP_CFG_CNT(x)	   _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CNT)
+#define G_BCM1480_ATRAP_CFG_CNT(x)	   _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CNT, M_BCM1480_ATRAP_CFG_CNT)
 
 #define M_BCM1480_ATRAP_CFG_WRITE	   _SB_MAKEMASK1(3)
-#define M_BCM1480_ATRAP_CFG_ALL	  	   _SB_MAKEMASK1(4)
-#define M_BCM1480_ATRAP_CFG_INV	   	   _SB_MAKEMASK1(5)
+#define M_BCM1480_ATRAP_CFG_ALL		   _SB_MAKEMASK1(4)
+#define M_BCM1480_ATRAP_CFG_INV		   _SB_MAKEMASK1(5)
 #define M_BCM1480_ATRAP_CFG_USESRC	   _SB_MAKEMASK1(6)
 #define M_BCM1480_ATRAP_CFG_SRCINV	   _SB_MAKEMASK1(7)
 
-#define S_BCM1480_ATRAP_CFG_AGENTID     8
-#define M_BCM1480_ATRAP_CFG_AGENTID     _SB_MAKEMASK(4, S_BCM1480_ATRAP_CFG_AGENTID)
-#define V_BCM1480_ATRAP_CFG_AGENTID(x)  _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID)
-#define G_BCM1480_ATRAP_CFG_AGENTID(x)  _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID, M_BCM1480_ATRAP_CFG_AGENTID)
+#define S_BCM1480_ATRAP_CFG_AGENTID	8
+#define M_BCM1480_ATRAP_CFG_AGENTID	_SB_MAKEMASK(4, S_BCM1480_ATRAP_CFG_AGENTID)
+#define V_BCM1480_ATRAP_CFG_AGENTID(x)	_SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID)
+#define G_BCM1480_ATRAP_CFG_AGENTID(x)	_SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID, M_BCM1480_ATRAP_CFG_AGENTID)
 
 
-#define K_BCM1480_BUS_AGENT_CPU0            0
-#define K_BCM1480_BUS_AGENT_CPU1            1
-#define K_BCM1480_BUS_AGENT_NC              2
-#define K_BCM1480_BUS_AGENT_IOB             3
-#define K_BCM1480_BUS_AGENT_SCD             4
-#define K_BCM1480_BUS_AGENT_L2C             6
-#define K_BCM1480_BUS_AGENT_MC              7
-#define K_BCM1480_BUS_AGENT_CPU2            8
-#define K_BCM1480_BUS_AGENT_CPU3            9
-#define K_BCM1480_BUS_AGENT_PM              10
+#define K_BCM1480_BUS_AGENT_CPU0	    0
+#define K_BCM1480_BUS_AGENT_CPU1	    1
+#define K_BCM1480_BUS_AGENT_NC		    2
+#define K_BCM1480_BUS_AGENT_IOB		    3
+#define K_BCM1480_BUS_AGENT_SCD		    4
+#define K_BCM1480_BUS_AGENT_L2C		    6
+#define K_BCM1480_BUS_AGENT_MC		    7
+#define K_BCM1480_BUS_AGENT_CPU2	    8
+#define K_BCM1480_BUS_AGENT_CPU3	    9
+#define K_BCM1480_BUS_AGENT_PM		    10
 
-#define S_BCM1480_ATRAP_CFG_CATTR           12
-#define M_BCM1480_ATRAP_CFG_CATTR           _SB_MAKEMASK(2, S_BCM1480_ATRAP_CFG_CATTR)
-#define V_BCM1480_ATRAP_CFG_CATTR(x)        _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CATTR)
-#define G_BCM1480_ATRAP_CFG_CATTR(x)        _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CATTR, M_BCM1480_ATRAP_CFG_CATTR)
+#define S_BCM1480_ATRAP_CFG_CATTR	    12
+#define M_BCM1480_ATRAP_CFG_CATTR	    _SB_MAKEMASK(2, S_BCM1480_ATRAP_CFG_CATTR)
+#define V_BCM1480_ATRAP_CFG_CATTR(x)	    _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CATTR)
+#define G_BCM1480_ATRAP_CFG_CATTR(x)	    _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CATTR, M_BCM1480_ATRAP_CFG_CATTR)
 
 #define K_BCM1480_ATRAP_CFG_CATTR_IGNORE    0
-#define K_BCM1480_ATRAP_CFG_CATTR_UNC       1
+#define K_BCM1480_ATRAP_CFG_CATTR_UNC	    1
 #define K_BCM1480_ATRAP_CFG_CATTR_NONCOH    2
 #define K_BCM1480_ATRAP_CFG_CATTR_COHERENT  3
 
-#define M_BCM1480_ATRAP_CFG_CATTRINV        _SB_MAKEMASK1(14)
+#define M_BCM1480_ATRAP_CFG_CATTRINV	    _SB_MAKEMASK1(14)
 
 
 /*
@@ -381,10 +381,10 @@
 
 #define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN    _SB_MAKEMASK1(25)
 
-#define S_BCM1480_SCD_TRSEQ_SWFUNC          26
-#define M_BCM1480_SCD_TRSEQ_SWFUNC          _SB_MAKEMASK(2, S_BCM1480_SCD_TRSEQ_SWFUNC)
-#define V_BCM1480_SCD_TRSEQ_SWFUNC(x)       _SB_MAKEVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC)
-#define G_BCM1480_SCD_TRSEQ_SWFUNC(x)       _SB_GETVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC, M_BCM1480_SCD_TRSEQ_SWFUNC)
+#define S_BCM1480_SCD_TRSEQ_SWFUNC	    26
+#define M_BCM1480_SCD_TRSEQ_SWFUNC	    _SB_MAKEMASK(2, S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define V_BCM1480_SCD_TRSEQ_SWFUNC(x)	    _SB_MAKEVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define G_BCM1480_SCD_TRSEQ_SWFUNC(x)	    _SB_GETVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC, M_BCM1480_SCD_TRSEQ_SWFUNC)
 
 /*
  * Trace Control Register (Table 49)
@@ -394,13 +394,13 @@
  * are defined below.
  */
 
-#define S_BCM1480_SCD_TRACE_CFG_MODE        16
-#define M_BCM1480_SCD_TRACE_CFG_MODE        _SB_MAKEMASK(2, S_BCM1480_SCD_TRACE_CFG_MODE)
-#define V_BCM1480_SCD_TRACE_CFG_MODE(x)     _SB_MAKEVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE)
-#define G_BCM1480_SCD_TRACE_CFG_MODE(x)     _SB_GETVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE, M_BCM1480_SCD_TRACE_CFG_MODE)
+#define S_BCM1480_SCD_TRACE_CFG_MODE	    16
+#define M_BCM1480_SCD_TRACE_CFG_MODE	    _SB_MAKEMASK(2, S_BCM1480_SCD_TRACE_CFG_MODE)
+#define V_BCM1480_SCD_TRACE_CFG_MODE(x)	    _SB_MAKEVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE)
+#define G_BCM1480_SCD_TRACE_CFG_MODE(x)	    _SB_GETVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE, M_BCM1480_SCD_TRACE_CFG_MODE)
 
 #define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS	0
-#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT	1
+#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1
 #define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID	2
 
 #endif /* _BCM1480_SCD_H */
diff --git a/arch/mips/include/asm/sibyte/bigsur.h b/arch/mips/include/asm/sibyte/bigsur.h
index 2d1a26d..ae29dae 100644
--- a/arch/mips/include/asm/sibyte/bigsur.h
+++ b/arch/mips/include/asm/sibyte/bigsur.h
@@ -24,25 +24,25 @@
 #ifdef CONFIG_SIBYTE_BIGSUR
 #define SIBYTE_BOARD_NAME "BCM91x80A/B (BigSur)"
 #define SIBYTE_HAVE_PCMCIA 1
-#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_HAVE_IDE	   1
 #endif
 
 /* Generic bus chip selects */
-#define LEDS_CS         3
-#define LEDS_PHYS       0x100a0000
+#define LEDS_CS		3
+#define LEDS_PHYS	0x100a0000
 
 #ifdef SIBYTE_HAVE_IDE
-#define IDE_CS          4
-#define IDE_PHYS        0x100b0000
-#define K_GPIO_GB_IDE   4
-#define K_INT_GB_IDE    (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#define IDE_CS		4
+#define IDE_PHYS	0x100b0000
+#define K_GPIO_GB_IDE	4
+#define K_INT_GB_IDE	(K_INT_GPIO_0 + K_GPIO_GB_IDE)
 #endif
 
 #ifdef SIBYTE_HAVE_PCMCIA
-#define PCMCIA_CS       6
-#define PCMCIA_PHYS     0x11000000
+#define PCMCIA_CS	6
+#define PCMCIA_PHYS	0x11000000
 #define K_GPIO_PC_READY 9
-#define K_INT_PC_READY  (K_INT_GPIO_0 + K_GPIO_PC_READY)
+#define K_INT_PC_READY	(K_INT_GPIO_0 + K_GPIO_PC_READY)
 #endif
 
 #endif /* __ASM_SIBYTE_BIGSUR_H */
diff --git a/arch/mips/include/asm/sibyte/carmel.h b/arch/mips/include/asm/sibyte/carmel.h
index 11cad71..793edba 100644
--- a/arch/mips/include/asm/sibyte/carmel.h
+++ b/arch/mips/include/asm/sibyte/carmel.h
@@ -23,35 +23,35 @@
 
 #define SIBYTE_BOARD_NAME "Carmel"
 
-#define GPIO_PHY_INTERRUPT      2
-#define GPIO_NONMASKABLE_INT    3
-#define GPIO_CF_INSERTED        6
-#define GPIO_MONTEREY_RESET     7
-#define GPIO_QUADUART_INT       8
-#define GPIO_CF_INT             9
-#define GPIO_FPGA_CCLK          10
-#define GPIO_FPGA_DOUT          11
-#define GPIO_FPGA_DIN           12
-#define GPIO_FPGA_PGM           13
-#define GPIO_FPGA_DONE          14
-#define GPIO_FPGA_INIT          15
+#define GPIO_PHY_INTERRUPT	2
+#define GPIO_NONMASKABLE_INT	3
+#define GPIO_CF_INSERTED	6
+#define GPIO_MONTEREY_RESET	7
+#define GPIO_QUADUART_INT	8
+#define GPIO_CF_INT		9
+#define GPIO_FPGA_CCLK		10
+#define GPIO_FPGA_DOUT		11
+#define GPIO_FPGA_DIN		12
+#define GPIO_FPGA_PGM		13
+#define GPIO_FPGA_DONE		14
+#define GPIO_FPGA_INIT		15
 
-#define LEDS_CS                 2
-#define LEDS_PHYS               0x100C0000
-#define MLEDS_CS                3
-#define MLEDS_PHYS              0x100A0000
-#define UART_CS                 4
-#define UART_PHYS               0x100D0000
-#define ARAVALI_CS              5
-#define ARAVALI_PHYS            0x11000000
-#define IDE_CS                  6
-#define IDE_PHYS                0x100B0000
-#define ARAVALI2_CS             7
-#define ARAVALI2_PHYS           0x100E0000
+#define LEDS_CS			2
+#define LEDS_PHYS		0x100C0000
+#define MLEDS_CS		3
+#define MLEDS_PHYS		0x100A0000
+#define UART_CS			4
+#define UART_PHYS		0x100D0000
+#define ARAVALI_CS		5
+#define ARAVALI_PHYS		0x11000000
+#define IDE_CS			6
+#define IDE_PHYS		0x100B0000
+#define ARAVALI2_CS		7
+#define ARAVALI2_PHYS		0x100E0000
 
 #if defined(CONFIG_SIBYTE_CARMEL)
-#define K_GPIO_GB_IDE   9
-#define K_INT_GB_IDE    (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#define K_GPIO_GB_IDE	9
+#define K_INT_GB_IDE	(K_INT_GPIO_0 + K_GPIO_GB_IDE)
 #endif
 
 
diff --git a/arch/mips/include/asm/sibyte/sb1250.h b/arch/mips/include/asm/sibyte/sb1250.h
index 80c1a05..d45dff9 100644
--- a/arch/mips/include/asm/sibyte/sb1250.h
+++ b/arch/mips/include/asm/sibyte/sb1250.h
@@ -27,8 +27,8 @@
 
 #define SB1250_NR_IRQS 64
 
-#define BCM1480_NR_IRQS                 128
-#define BCM1480_NR_IRQS_HALF            64
+#define BCM1480_NR_IRQS			128
+#define BCM1480_NR_IRQS_HALF		64
 
 #define SB1250_DUART_MINOR_BASE		64
 
diff --git a/arch/mips/include/asm/sibyte/sb1250_defs.h b/arch/mips/include/asm/sibyte/sb1250_defs.h
index 09365f9..4364eb8 100644
--- a/arch/mips/include/asm/sibyte/sb1250_defs.h
+++ b/arch/mips/include/asm/sibyte/sb1250_defs.h
@@ -51,15 +51,15 @@
     *
     *  Use like:
     *
-    *    #define SIBYTE_HDR_FEATURES	SIBYTE_HDR_FMASK_112x_PASS1
+    *	 #define SIBYTE_HDR_FEATURES	SIBYTE_HDR_FMASK_112x_PASS1
     *
     *		Generate defines only for that revision of chip.
     *
-    *    #if SIBYTE_HDR_FEATURE(chip,pass)
+    *	 #if SIBYTE_HDR_FEATURE(chip,pass)
     *
     *		True if header features for that revision or later of
-    *	        that particular chip type are enabled in SIBYTE_HDR_FEATURES.
-    *	        (Use this to bracket #defines for features present in a given
+    *		that particular chip type are enabled in SIBYTE_HDR_FEATURES.
+    *		(Use this to bracket #defines for features present in a given
     *		revision and later.)
     *
     *		Note that there is no implied ordering between chip types.
@@ -69,12 +69,12 @@
     *		SIBYTE_HDR_FEATURE(112x, PASS1) is OK, but
     *		SIBYTE_HDR_FEATURE(1120, pass1) is not (for two reasons).
     *
-    *    #if SIBYTE_HDR_FEATURE_UP_TO(chip,pass)
+    *	 #if SIBYTE_HDR_FEATURE_UP_TO(chip,pass)
     *
     *		Same as SIBYTE_HDR_FEATURE, but true for the named revision
     *		and earlier revisions of the named chip type.
     *
-    *    #if SIBYTE_HDR_FEATURE_EXACT(chip,pass)
+    *	 #if SIBYTE_HDR_FEATURE_EXACT(chip,pass)
     *
     *		Same as SIBYTE_HDR_FEATURE, but only true for the named
     *		revision of the named chip type.  (Note that this CANNOT
@@ -82,7 +82,7 @@
     *		particular chip/revision.  It will be true any time this
     *		chip/revision is included in SIBYTE_HDR_FEATURES.)
     *
-    *    #if SIBYTE_HDR_FEATURE_CHIP(chip)
+    *	 #if SIBYTE_HDR_FEATURE_CHIP(chip)
     *
     *		True if header features for (any revision of) that chip type
     *		are enabled in SIBYTE_HDR_FEATURES.  (Use this to bracket
@@ -95,47 +95,47 @@
     *  ordering, so be careful when adding support for new minor revs.
     ********************************************************************* */
 
-#define	SIBYTE_HDR_FMASK_1250_ALL		0x000000ff
-#define	SIBYTE_HDR_FMASK_1250_PASS1		0x00000001
-#define	SIBYTE_HDR_FMASK_1250_PASS2		0x00000002
-#define	SIBYTE_HDR_FMASK_1250_PASS3		0x00000004
+#define SIBYTE_HDR_FMASK_1250_ALL		0x000000ff
+#define SIBYTE_HDR_FMASK_1250_PASS1		0x00000001
+#define SIBYTE_HDR_FMASK_1250_PASS2		0x00000002
+#define SIBYTE_HDR_FMASK_1250_PASS3		0x00000004
 
-#define	SIBYTE_HDR_FMASK_112x_ALL		0x00000f00
-#define	SIBYTE_HDR_FMASK_112x_PASS1		0x00000100
+#define SIBYTE_HDR_FMASK_112x_ALL		0x00000f00
+#define SIBYTE_HDR_FMASK_112x_PASS1		0x00000100
 
 #define SIBYTE_HDR_FMASK_1480_ALL		0x0000f000
 #define SIBYTE_HDR_FMASK_1480_PASS1		0x00001000
 #define SIBYTE_HDR_FMASK_1480_PASS2		0x00002000
 
-/* Bit mask for chip/revision.  (use _ALL for all revisions of a chip).  */
-#define	SIBYTE_HDR_FMASK(chip, pass)					\
+/* Bit mask for chip/revision.	(use _ALL for all revisions of a chip).	 */
+#define SIBYTE_HDR_FMASK(chip, pass)					\
     (SIBYTE_HDR_FMASK_ ## chip ## _ ## pass)
-#define	SIBYTE_HDR_FMASK_ALLREVS(chip)					\
+#define SIBYTE_HDR_FMASK_ALLREVS(chip)					\
     (SIBYTE_HDR_FMASK_ ## chip ## _ALL)
 
 /* Default constant value for all chips, all revisions */
-#define	SIBYTE_HDR_FMASK_ALL						\
+#define SIBYTE_HDR_FMASK_ALL						\
     (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL		\
      | SIBYTE_HDR_FMASK_1480_ALL)
 
 /* This one is used for the "original" BCM1250/BCM112x chips.  We use this
    to weed out constants and macros that do not exist on later chips like
-   the BCM1480  */
+   the BCM1480	*/
 #define SIBYTE_HDR_FMASK_1250_112x_ALL					\
     (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL)
 #define SIBYTE_HDR_FMASK_1250_112x SIBYTE_HDR_FMASK_1250_112x_ALL
 
 #ifndef SIBYTE_HDR_FEATURES
-#define	SIBYTE_HDR_FEATURES			SIBYTE_HDR_FMASK_ALL
+#define SIBYTE_HDR_FEATURES			SIBYTE_HDR_FMASK_ALL
 #endif
 
 
 /* Bit mask for revisions of chip exclusively before the named revision.  */
-#define	SIBYTE_HDR_FMASK_BEFORE(chip, pass)				\
+#define SIBYTE_HDR_FMASK_BEFORE(chip, pass)				\
     ((SIBYTE_HDR_FMASK(chip, pass) - 1) & SIBYTE_HDR_FMASK_ALLREVS(chip))
 
-/* Bit mask for revisions of chip exclusively after the named revision.  */
-#define	SIBYTE_HDR_FMASK_AFTER(chip, pass)				\
+/* Bit mask for revisions of chip exclusively after the named revision.	 */
+#define SIBYTE_HDR_FMASK_AFTER(chip, pass)				\
     (~(SIBYTE_HDR_FMASK(chip, pass)					\
      | (SIBYTE_HDR_FMASK(chip, pass) - 1)) & SIBYTE_HDR_FMASK_ALLREVS(chip))
 
@@ -168,38 +168,38 @@
 /*  *********************************************************************
     *  Naming schemes for constants in these files:
     *
-    *  M_xxx           MASK constant (identifies bits in a register).
-    *                  For multi-bit fields, all bits in the field will
-    *                  be set.
+    *  M_xxx	       MASK constant (identifies bits in a register).
+    *		       For multi-bit fields, all bits in the field will
+    *		       be set.
     *
-    *  K_xxx           "Code" constant (value for data in a multi-bit
-    *                  field).  The value is right justified.
+    *  K_xxx	       "Code" constant (value for data in a multi-bit
+    *		       field).	The value is right justified.
     *
-    *  V_xxx           "Value" constant.  This is the same as the
-    *                  corresponding "K_xxx" constant, except it is
-    *                  shifted to the correct position in the register.
+    *  V_xxx	       "Value" constant.  This is the same as the
+    *		       corresponding "K_xxx" constant, except it is
+    *		       shifted to the correct position in the register.
     *
-    *  S_xxx           SHIFT constant.  This is the number of bits that
-    *                  a field value (code) needs to be shifted
-    *                  (towards the left) to put the value in the right
-    *                  position for the register.
+    *  S_xxx	       SHIFT constant.	This is the number of bits that
+    *		       a field value (code) needs to be shifted
+    *		       (towards the left) to put the value in the right
+    *		       position for the register.
     *
-    *  A_xxx           ADDRESS constant.  This will be a physical
-    *                  address.  Use the PHYS_TO_K1 macro to generate
-    *                  a K1SEG address.
+    *  A_xxx	       ADDRESS constant.  This will be a physical
+    *		       address.	 Use the PHYS_TO_K1 macro to generate
+    *		       a K1SEG address.
     *
-    *  R_xxx           RELATIVE offset constant.  This is an offset from
-    *                  an A_xxx constant (usually the first register in
-    *                  a group).
+    *  R_xxx	       RELATIVE offset constant.  This is an offset from
+    *		       an A_xxx constant (usually the first register in
+    *		       a group).
     *
-    *  G_xxx(X)        GET value.  This macro obtains a multi-bit field
-    *                  from a register, masks it, and shifts it to
-    *                  the bottom of the register (retrieving a K_xxx
-    *                  value, for example).
+    *  G_xxx(X)	       GET value.  This macro obtains a multi-bit field
+    *		       from a register, masks it, and shifts it to
+    *		       the bottom of the register (retrieving a K_xxx
+    *		       value, for example).
     *
-    *  V_xxx(X)        VALUE.  This macro computes the value of a
-    *                  K_xxx constant shifted to the correct position
-    *                  in the register.
+    *  V_xxx(X)	       VALUE.  This macro computes the value of a
+    *		       K_xxx constant shifted to the correct position
+    *		       in the register.
     ********************************************************************* */
 
 
diff --git a/arch/mips/include/asm/sibyte/sb1250_dma.h b/arch/mips/include/asm/sibyte/sb1250_dma.h
index 6c44dfb..ea81713 100644
--- a/arch/mips/include/asm/sibyte/sb1250_dma.h
+++ b/arch/mips/include/asm/sibyte/sb1250_dma.h
@@ -51,15 +51,15 @@
  */
 
 
-#define M_DMA_DROP                  _SB_MAKEMASK1(0)
+#define M_DMA_DROP		    _SB_MAKEMASK1(0)
 
-#define M_DMA_CHAIN_SEL             _SB_MAKEMASK1(1)
-#define M_DMA_RESERVED1             _SB_MAKEMASK1(2)
+#define M_DMA_CHAIN_SEL		    _SB_MAKEMASK1(1)
+#define M_DMA_RESERVED1		    _SB_MAKEMASK1(2)
 
 #define S_DMA_DESC_TYPE		    _SB_MAKE64(1)
 #define M_DMA_DESC_TYPE		    _SB_MAKEMASK(2, S_DMA_DESC_TYPE)
-#define V_DMA_DESC_TYPE(x)          _SB_MAKEVALUE(x, S_DMA_DESC_TYPE)
-#define G_DMA_DESC_TYPE(x)          _SB_GETVALUE(x, S_DMA_DESC_TYPE, M_DMA_DESC_TYPE)
+#define V_DMA_DESC_TYPE(x)	    _SB_MAKEVALUE(x, S_DMA_DESC_TYPE)
+#define G_DMA_DESC_TYPE(x)	    _SB_GETVALUE(x, S_DMA_DESC_TYPE, M_DMA_DESC_TYPE)
 
 #define K_DMA_DESC_TYPE_RING_AL		0
 #define K_DMA_DESC_TYPE_CHAIN_AL	1
@@ -69,31 +69,31 @@
 #define K_DMA_DESC_TYPE_RING_UAL_RMW	3
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
-#define M_DMA_EOP_INT_EN            _SB_MAKEMASK1(3)
-#define M_DMA_HWM_INT_EN            _SB_MAKEMASK1(4)
-#define M_DMA_LWM_INT_EN            _SB_MAKEMASK1(5)
-#define M_DMA_TBX_EN                _SB_MAKEMASK1(6)
-#define M_DMA_TDX_EN                _SB_MAKEMASK1(7)
+#define M_DMA_EOP_INT_EN	    _SB_MAKEMASK1(3)
+#define M_DMA_HWM_INT_EN	    _SB_MAKEMASK1(4)
+#define M_DMA_LWM_INT_EN	    _SB_MAKEMASK1(5)
+#define M_DMA_TBX_EN		    _SB_MAKEMASK1(6)
+#define M_DMA_TDX_EN		    _SB_MAKEMASK1(7)
 
-#define S_DMA_INT_PKTCNT            _SB_MAKE64(8)
-#define M_DMA_INT_PKTCNT            _SB_MAKEMASK(8, S_DMA_INT_PKTCNT)
-#define V_DMA_INT_PKTCNT(x)         _SB_MAKEVALUE(x, S_DMA_INT_PKTCNT)
-#define G_DMA_INT_PKTCNT(x)         _SB_GETVALUE(x, S_DMA_INT_PKTCNT, M_DMA_INT_PKTCNT)
+#define S_DMA_INT_PKTCNT	    _SB_MAKE64(8)
+#define M_DMA_INT_PKTCNT	    _SB_MAKEMASK(8, S_DMA_INT_PKTCNT)
+#define V_DMA_INT_PKTCNT(x)	    _SB_MAKEVALUE(x, S_DMA_INT_PKTCNT)
+#define G_DMA_INT_PKTCNT(x)	    _SB_GETVALUE(x, S_DMA_INT_PKTCNT, M_DMA_INT_PKTCNT)
 
-#define S_DMA_RINGSZ                _SB_MAKE64(16)
-#define M_DMA_RINGSZ                _SB_MAKEMASK(16, S_DMA_RINGSZ)
-#define V_DMA_RINGSZ(x)             _SB_MAKEVALUE(x, S_DMA_RINGSZ)
-#define G_DMA_RINGSZ(x)             _SB_GETVALUE(x, S_DMA_RINGSZ, M_DMA_RINGSZ)
+#define S_DMA_RINGSZ		    _SB_MAKE64(16)
+#define M_DMA_RINGSZ		    _SB_MAKEMASK(16, S_DMA_RINGSZ)
+#define V_DMA_RINGSZ(x)		    _SB_MAKEVALUE(x, S_DMA_RINGSZ)
+#define G_DMA_RINGSZ(x)		    _SB_GETVALUE(x, S_DMA_RINGSZ, M_DMA_RINGSZ)
 
-#define S_DMA_HIGH_WATERMARK        _SB_MAKE64(32)
-#define M_DMA_HIGH_WATERMARK        _SB_MAKEMASK(16, S_DMA_HIGH_WATERMARK)
-#define V_DMA_HIGH_WATERMARK(x)     _SB_MAKEVALUE(x, S_DMA_HIGH_WATERMARK)
-#define G_DMA_HIGH_WATERMARK(x)     _SB_GETVALUE(x, S_DMA_HIGH_WATERMARK, M_DMA_HIGH_WATERMARK)
+#define S_DMA_HIGH_WATERMARK	    _SB_MAKE64(32)
+#define M_DMA_HIGH_WATERMARK	    _SB_MAKEMASK(16, S_DMA_HIGH_WATERMARK)
+#define V_DMA_HIGH_WATERMARK(x)	    _SB_MAKEVALUE(x, S_DMA_HIGH_WATERMARK)
+#define G_DMA_HIGH_WATERMARK(x)	    _SB_GETVALUE(x, S_DMA_HIGH_WATERMARK, M_DMA_HIGH_WATERMARK)
 
-#define S_DMA_LOW_WATERMARK         _SB_MAKE64(48)
-#define M_DMA_LOW_WATERMARK         _SB_MAKEMASK(16, S_DMA_LOW_WATERMARK)
-#define V_DMA_LOW_WATERMARK(x)      _SB_MAKEVALUE(x, S_DMA_LOW_WATERMARK)
-#define G_DMA_LOW_WATERMARK(x)      _SB_GETVALUE(x, S_DMA_LOW_WATERMARK, M_DMA_LOW_WATERMARK)
+#define S_DMA_LOW_WATERMARK	    _SB_MAKE64(48)
+#define M_DMA_LOW_WATERMARK	    _SB_MAKEMASK(16, S_DMA_LOW_WATERMARK)
+#define V_DMA_LOW_WATERMARK(x)	    _SB_MAKEVALUE(x, S_DMA_LOW_WATERMARK)
+#define G_DMA_LOW_WATERMARK(x)	    _SB_GETVALUE(x, S_DMA_LOW_WATERMARK, M_DMA_LOW_WATERMARK)
 
 /*
  * Ethernet and Serial DMA Configuration Register 1 (Table 7-5)
@@ -103,11 +103,11 @@
  * Registers: DMA_CONFIG1_SER_x_TX
  */
 
-#define M_DMA_HDR_CF_EN             _SB_MAKEMASK1(0)
-#define M_DMA_ASIC_XFR_EN           _SB_MAKEMASK1(1)
-#define M_DMA_PRE_ADDR_EN           _SB_MAKEMASK1(2)
-#define M_DMA_FLOW_CTL_EN           _SB_MAKEMASK1(3)
-#define M_DMA_NO_DSCR_UPDT          _SB_MAKEMASK1(4)
+#define M_DMA_HDR_CF_EN		    _SB_MAKEMASK1(0)
+#define M_DMA_ASIC_XFR_EN	    _SB_MAKEMASK1(1)
+#define M_DMA_PRE_ADDR_EN	    _SB_MAKEMASK1(2)
+#define M_DMA_FLOW_CTL_EN	    _SB_MAKEMASK1(3)
+#define M_DMA_NO_DSCR_UPDT	    _SB_MAKEMASK1(4)
 #define M_DMA_L2CA		    _SB_MAKEMASK1(5)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
@@ -116,37 +116,37 @@
 #define M_DMA_TX_FC_PAUSE_EN	    _SB_MAKEMASK1(7)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
-#define M_DMA_MBZ1                  _SB_MAKEMASK(6, 15)
+#define M_DMA_MBZ1		    _SB_MAKEMASK(6, 15)
 
-#define S_DMA_HDR_SIZE              _SB_MAKE64(21)
-#define M_DMA_HDR_SIZE              _SB_MAKEMASK(9, S_DMA_HDR_SIZE)
-#define V_DMA_HDR_SIZE(x)           _SB_MAKEVALUE(x, S_DMA_HDR_SIZE)
-#define G_DMA_HDR_SIZE(x)           _SB_GETVALUE(x, S_DMA_HDR_SIZE, M_DMA_HDR_SIZE)
+#define S_DMA_HDR_SIZE		    _SB_MAKE64(21)
+#define M_DMA_HDR_SIZE		    _SB_MAKEMASK(9, S_DMA_HDR_SIZE)
+#define V_DMA_HDR_SIZE(x)	    _SB_MAKEVALUE(x, S_DMA_HDR_SIZE)
+#define G_DMA_HDR_SIZE(x)	    _SB_GETVALUE(x, S_DMA_HDR_SIZE, M_DMA_HDR_SIZE)
 
-#define M_DMA_MBZ2                  _SB_MAKEMASK(5, 32)
+#define M_DMA_MBZ2		    _SB_MAKEMASK(5, 32)
 
-#define S_DMA_ASICXFR_SIZE          _SB_MAKE64(37)
-#define M_DMA_ASICXFR_SIZE          _SB_MAKEMASK(9, S_DMA_ASICXFR_SIZE)
-#define V_DMA_ASICXFR_SIZE(x)       _SB_MAKEVALUE(x, S_DMA_ASICXFR_SIZE)
-#define G_DMA_ASICXFR_SIZE(x)       _SB_GETVALUE(x, S_DMA_ASICXFR_SIZE, M_DMA_ASICXFR_SIZE)
+#define S_DMA_ASICXFR_SIZE	    _SB_MAKE64(37)
+#define M_DMA_ASICXFR_SIZE	    _SB_MAKEMASK(9, S_DMA_ASICXFR_SIZE)
+#define V_DMA_ASICXFR_SIZE(x)	    _SB_MAKEVALUE(x, S_DMA_ASICXFR_SIZE)
+#define G_DMA_ASICXFR_SIZE(x)	    _SB_GETVALUE(x, S_DMA_ASICXFR_SIZE, M_DMA_ASICXFR_SIZE)
 
-#define S_DMA_INT_TIMEOUT           _SB_MAKE64(48)
-#define M_DMA_INT_TIMEOUT           _SB_MAKEMASK(16, S_DMA_INT_TIMEOUT)
-#define V_DMA_INT_TIMEOUT(x)        _SB_MAKEVALUE(x, S_DMA_INT_TIMEOUT)
-#define G_DMA_INT_TIMEOUT(x)        _SB_GETVALUE(x, S_DMA_INT_TIMEOUT, M_DMA_INT_TIMEOUT)
+#define S_DMA_INT_TIMEOUT	    _SB_MAKE64(48)
+#define M_DMA_INT_TIMEOUT	    _SB_MAKEMASK(16, S_DMA_INT_TIMEOUT)
+#define V_DMA_INT_TIMEOUT(x)	    _SB_MAKEVALUE(x, S_DMA_INT_TIMEOUT)
+#define G_DMA_INT_TIMEOUT(x)	    _SB_GETVALUE(x, S_DMA_INT_TIMEOUT, M_DMA_INT_TIMEOUT)
 
 /*
  * Ethernet and Serial DMA Descriptor base address (Table 7-6)
  */
 
-#define M_DMA_DSCRBASE_MBZ          _SB_MAKEMASK(4, 0)
+#define M_DMA_DSCRBASE_MBZ	    _SB_MAKEMASK(4, 0)
 
 
 /*
  * ASIC Mode Base Address (Table 7-7)
  */
 
-#define M_DMA_ASIC_BASE_MBZ         _SB_MAKEMASK(20, 0)
+#define M_DMA_ASIC_BASE_MBZ	    _SB_MAKEMASK(20, 0)
 
 /*
  * DMA Descriptor Count Registers (Table 7-8)
@@ -159,10 +159,10 @@
  * Current Descriptor Address Register (Table 7-11)
  */
 
-#define S_DMA_CURDSCR_ADDR          _SB_MAKE64(0)
-#define M_DMA_CURDSCR_ADDR          _SB_MAKEMASK(40, S_DMA_CURDSCR_ADDR)
-#define S_DMA_CURDSCR_COUNT         _SB_MAKE64(40)
-#define M_DMA_CURDSCR_COUNT         _SB_MAKEMASK(16, S_DMA_CURDSCR_COUNT)
+#define S_DMA_CURDSCR_ADDR	    _SB_MAKE64(0)
+#define M_DMA_CURDSCR_ADDR	    _SB_MAKEMASK(40, S_DMA_CURDSCR_ADDR)
+#define S_DMA_CURDSCR_COUNT	    _SB_MAKE64(40)
+#define M_DMA_CURDSCR_COUNT	    _SB_MAKEMASK(16, S_DMA_CURDSCR_COUNT)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_DMA_TX_CH_PAUSE_ON	    _SB_MAKEMASK1(56)
@@ -172,13 +172,13 @@
  * Receive Packet Drop Registers
  */
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define S_DMA_OODLOST_RX           _SB_MAKE64(0)
-#define M_DMA_OODLOST_RX           _SB_MAKEMASK(16, S_DMA_OODLOST_RX)
-#define G_DMA_OODLOST_RX(x)        _SB_GETVALUE(x, S_DMA_OODLOST_RX, M_DMA_OODLOST_RX)
+#define S_DMA_OODLOST_RX	   _SB_MAKE64(0)
+#define M_DMA_OODLOST_RX	   _SB_MAKEMASK(16, S_DMA_OODLOST_RX)
+#define G_DMA_OODLOST_RX(x)	   _SB_GETVALUE(x, S_DMA_OODLOST_RX, M_DMA_OODLOST_RX)
 
-#define S_DMA_EOP_COUNT_RX         _SB_MAKE64(16)
-#define M_DMA_EOP_COUNT_RX         _SB_MAKEMASK(8, S_DMA_EOP_COUNT_RX)
-#define G_DMA_EOP_COUNT_RX(x)      _SB_GETVALUE(x, S_DMA_EOP_COUNT_RX, M_DMA_EOP_COUNT_RX)
+#define S_DMA_EOP_COUNT_RX	   _SB_MAKE64(16)
+#define M_DMA_EOP_COUNT_RX	   _SB_MAKEMASK(8, S_DMA_EOP_COUNT_RX)
+#define G_DMA_EOP_COUNT_RX(x)	   _SB_GETVALUE(x, S_DMA_EOP_COUNT_RX, M_DMA_EOP_COUNT_RX)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
 /*  *********************************************************************
@@ -189,26 +189,26 @@
  * Descriptor doubleword "A"  (Table 7-12)
  */
 
-#define S_DMA_DSCRA_OFFSET          _SB_MAKE64(0)
-#define M_DMA_DSCRA_OFFSET          _SB_MAKEMASK(5, S_DMA_DSCRA_OFFSET)
-#define V_DMA_DSCRA_OFFSET(x)       _SB_MAKEVALUE(x, S_DMA_DSCRA_OFFSET)
-#define G_DMA_DSCRA_OFFSET(x)       _SB_GETVALUE(x, S_DMA_DSCRA_OFFSET, M_DMA_DSCRA_OFFSET)
+#define S_DMA_DSCRA_OFFSET	    _SB_MAKE64(0)
+#define M_DMA_DSCRA_OFFSET	    _SB_MAKEMASK(5, S_DMA_DSCRA_OFFSET)
+#define V_DMA_DSCRA_OFFSET(x)	    _SB_MAKEVALUE(x, S_DMA_DSCRA_OFFSET)
+#define G_DMA_DSCRA_OFFSET(x)	    _SB_GETVALUE(x, S_DMA_DSCRA_OFFSET, M_DMA_DSCRA_OFFSET)
 
 /* Note: Don't shift the address over, just mask it with the mask below */
-#define S_DMA_DSCRA_A_ADDR          _SB_MAKE64(5)
-#define M_DMA_DSCRA_A_ADDR          _SB_MAKEMASK(35, S_DMA_DSCRA_A_ADDR)
+#define S_DMA_DSCRA_A_ADDR	    _SB_MAKE64(5)
+#define M_DMA_DSCRA_A_ADDR	    _SB_MAKEMASK(35, S_DMA_DSCRA_A_ADDR)
 
 #define M_DMA_DSCRA_A_ADDR_OFFSET   (M_DMA_DSCRA_OFFSET | M_DMA_DSCRA_A_ADDR)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define S_DMA_DSCRA_A_ADDR_UA        _SB_MAKE64(0)
-#define M_DMA_DSCRA_A_ADDR_UA        _SB_MAKEMASK(40, S_DMA_DSCRA_A_ADDR_UA)
+#define S_DMA_DSCRA_A_ADDR_UA	     _SB_MAKE64(0)
+#define M_DMA_DSCRA_A_ADDR_UA	     _SB_MAKEMASK(40, S_DMA_DSCRA_A_ADDR_UA)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
-#define S_DMA_DSCRA_A_SIZE          _SB_MAKE64(40)
-#define M_DMA_DSCRA_A_SIZE          _SB_MAKEMASK(9, S_DMA_DSCRA_A_SIZE)
-#define V_DMA_DSCRA_A_SIZE(x)       _SB_MAKEVALUE(x, S_DMA_DSCRA_A_SIZE)
-#define G_DMA_DSCRA_A_SIZE(x)       _SB_GETVALUE(x, S_DMA_DSCRA_A_SIZE, M_DMA_DSCRA_A_SIZE)
+#define S_DMA_DSCRA_A_SIZE	    _SB_MAKE64(40)
+#define M_DMA_DSCRA_A_SIZE	    _SB_MAKEMASK(9, S_DMA_DSCRA_A_SIZE)
+#define V_DMA_DSCRA_A_SIZE(x)	    _SB_MAKEVALUE(x, S_DMA_DSCRA_A_SIZE)
+#define G_DMA_DSCRA_A_SIZE(x)	    _SB_GETVALUE(x, S_DMA_DSCRA_A_SIZE, M_DMA_DSCRA_A_SIZE)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define S_DMA_DSCRA_DSCR_CNT	    _SB_MAKE64(40)
@@ -216,43 +216,43 @@
 #define G_DMA_DSCRA_DSCR_CNT(x)	    _SB_GETVALUE(x, S_DMA_DSCRA_DSCR_CNT, M_DMA_DSCRA_DSCR_CNT)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
-#define M_DMA_DSCRA_INTERRUPT       _SB_MAKEMASK1(49)
+#define M_DMA_DSCRA_INTERRUPT	    _SB_MAKEMASK1(49)
 #define M_DMA_DSCRA_OFFSETB	    _SB_MAKEMASK1(50)
 
-#define S_DMA_DSCRA_STATUS          _SB_MAKE64(51)
-#define M_DMA_DSCRA_STATUS          _SB_MAKEMASK(13, S_DMA_DSCRA_STATUS)
-#define V_DMA_DSCRA_STATUS(x)       _SB_MAKEVALUE(x, S_DMA_DSCRA_STATUS)
-#define G_DMA_DSCRA_STATUS(x)       _SB_GETVALUE(x, S_DMA_DSCRA_STATUS, M_DMA_DSCRA_STATUS)
+#define S_DMA_DSCRA_STATUS	    _SB_MAKE64(51)
+#define M_DMA_DSCRA_STATUS	    _SB_MAKEMASK(13, S_DMA_DSCRA_STATUS)
+#define V_DMA_DSCRA_STATUS(x)	    _SB_MAKEVALUE(x, S_DMA_DSCRA_STATUS)
+#define G_DMA_DSCRA_STATUS(x)	    _SB_GETVALUE(x, S_DMA_DSCRA_STATUS, M_DMA_DSCRA_STATUS)
 
 /*
  * Descriptor doubleword "B"  (Table 7-13)
  */
 
 
-#define S_DMA_DSCRB_OPTIONS         _SB_MAKE64(0)
-#define M_DMA_DSCRB_OPTIONS         _SB_MAKEMASK(4, S_DMA_DSCRB_OPTIONS)
-#define V_DMA_DSCRB_OPTIONS(x)      _SB_MAKEVALUE(x, S_DMA_DSCRB_OPTIONS)
-#define G_DMA_DSCRB_OPTIONS(x)      _SB_GETVALUE(x, S_DMA_DSCRB_OPTIONS, M_DMA_DSCRB_OPTIONS)
+#define S_DMA_DSCRB_OPTIONS	    _SB_MAKE64(0)
+#define M_DMA_DSCRB_OPTIONS	    _SB_MAKEMASK(4, S_DMA_DSCRB_OPTIONS)
+#define V_DMA_DSCRB_OPTIONS(x)	    _SB_MAKEVALUE(x, S_DMA_DSCRB_OPTIONS)
+#define G_DMA_DSCRB_OPTIONS(x)	    _SB_GETVALUE(x, S_DMA_DSCRB_OPTIONS, M_DMA_DSCRB_OPTIONS)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define S_DMA_DSCRB_A_SIZE        _SB_MAKE64(8)
-#define M_DMA_DSCRB_A_SIZE        _SB_MAKEMASK(14, S_DMA_DSCRB_A_SIZE)
-#define V_DMA_DSCRB_A_SIZE(x)     _SB_MAKEVALUE(x, S_DMA_DSCRB_A_SIZE)
-#define G_DMA_DSCRB_A_SIZE(x)     _SB_GETVALUE(x, S_DMA_DSCRB_A_SIZE, M_DMA_DSCRB_A_SIZE)
+#define S_DMA_DSCRB_A_SIZE	  _SB_MAKE64(8)
+#define M_DMA_DSCRB_A_SIZE	  _SB_MAKEMASK(14, S_DMA_DSCRB_A_SIZE)
+#define V_DMA_DSCRB_A_SIZE(x)	  _SB_MAKEVALUE(x, S_DMA_DSCRB_A_SIZE)
+#define G_DMA_DSCRB_A_SIZE(x)	  _SB_GETVALUE(x, S_DMA_DSCRB_A_SIZE, M_DMA_DSCRB_A_SIZE)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
-#define R_DMA_DSCRB_ADDR            _SB_MAKE64(0x10)
+#define R_DMA_DSCRB_ADDR	    _SB_MAKE64(0x10)
 
 /* Note: Don't shift the address over, just mask it with the mask below */
-#define S_DMA_DSCRB_B_ADDR          _SB_MAKE64(5)
-#define M_DMA_DSCRB_B_ADDR          _SB_MAKEMASK(35, S_DMA_DSCRB_B_ADDR)
+#define S_DMA_DSCRB_B_ADDR	    _SB_MAKE64(5)
+#define M_DMA_DSCRB_B_ADDR	    _SB_MAKEMASK(35, S_DMA_DSCRB_B_ADDR)
 
-#define S_DMA_DSCRB_B_SIZE          _SB_MAKE64(40)
-#define M_DMA_DSCRB_B_SIZE          _SB_MAKEMASK(9, S_DMA_DSCRB_B_SIZE)
-#define V_DMA_DSCRB_B_SIZE(x)       _SB_MAKEVALUE(x, S_DMA_DSCRB_B_SIZE)
-#define G_DMA_DSCRB_B_SIZE(x)       _SB_GETVALUE(x, S_DMA_DSCRB_B_SIZE, M_DMA_DSCRB_B_SIZE)
+#define S_DMA_DSCRB_B_SIZE	    _SB_MAKE64(40)
+#define M_DMA_DSCRB_B_SIZE	    _SB_MAKEMASK(9, S_DMA_DSCRB_B_SIZE)
+#define V_DMA_DSCRB_B_SIZE(x)	    _SB_MAKEVALUE(x, S_DMA_DSCRB_B_SIZE)
+#define G_DMA_DSCRB_B_SIZE(x)	    _SB_GETVALUE(x, S_DMA_DSCRB_B_SIZE, M_DMA_DSCRB_B_SIZE)
 
-#define M_DMA_DSCRB_B_VALID         _SB_MAKEMASK1(49)
+#define M_DMA_DSCRB_B_VALID	    _SB_MAKEMASK1(49)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define S_DMA_DSCRB_PKT_SIZE_MSB    _SB_MAKE64(48)
@@ -261,24 +261,24 @@
 #define G_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB, M_DMA_DSCRB_PKT_SIZE_MSB)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
-#define S_DMA_DSCRB_PKT_SIZE        _SB_MAKE64(50)
-#define M_DMA_DSCRB_PKT_SIZE        _SB_MAKEMASK(14, S_DMA_DSCRB_PKT_SIZE)
-#define V_DMA_DSCRB_PKT_SIZE(x)     _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE)
-#define G_DMA_DSCRB_PKT_SIZE(x)     _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE, M_DMA_DSCRB_PKT_SIZE)
+#define S_DMA_DSCRB_PKT_SIZE	    _SB_MAKE64(50)
+#define M_DMA_DSCRB_PKT_SIZE	    _SB_MAKEMASK(14, S_DMA_DSCRB_PKT_SIZE)
+#define V_DMA_DSCRB_PKT_SIZE(x)	    _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE)
+#define G_DMA_DSCRB_PKT_SIZE(x)	    _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE, M_DMA_DSCRB_PKT_SIZE)
 
 /*
  * from pass2 some bits in dscr_b are also used for rx status
  */
-#define S_DMA_DSCRB_STATUS          _SB_MAKE64(0)
-#define M_DMA_DSCRB_STATUS          _SB_MAKEMASK(1, S_DMA_DSCRB_STATUS)
-#define V_DMA_DSCRB_STATUS(x)       _SB_MAKEVALUE(x, S_DMA_DSCRB_STATUS)
-#define G_DMA_DSCRB_STATUS(x)       _SB_GETVALUE(x, S_DMA_DSCRB_STATUS, M_DMA_DSCRB_STATUS)
+#define S_DMA_DSCRB_STATUS	    _SB_MAKE64(0)
+#define M_DMA_DSCRB_STATUS	    _SB_MAKEMASK(1, S_DMA_DSCRB_STATUS)
+#define V_DMA_DSCRB_STATUS(x)	    _SB_MAKEVALUE(x, S_DMA_DSCRB_STATUS)
+#define G_DMA_DSCRB_STATUS(x)	    _SB_GETVALUE(x, S_DMA_DSCRB_STATUS, M_DMA_DSCRB_STATUS)
 
 /*
  * Ethernet Descriptor Status Bits (Table 7-15)
  */
 
-#define M_DMA_ETHRX_BADIP4CS        _SB_MAKEMASK1(51)
+#define M_DMA_ETHRX_BADIP4CS	    _SB_MAKEMASK1(51)
 #define M_DMA_ETHRX_DSCRERR	    _SB_MAKEMASK1(52)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
@@ -292,70 +292,70 @@
 #define M_DMA_ETH_CRC_FLAG	_SB_MAKEMASK1(2)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
-#define S_DMA_ETHRX_RXCH            53
-#define M_DMA_ETHRX_RXCH            _SB_MAKEMASK(2, S_DMA_ETHRX_RXCH)
-#define V_DMA_ETHRX_RXCH(x)         _SB_MAKEVALUE(x, S_DMA_ETHRX_RXCH)
-#define G_DMA_ETHRX_RXCH(x)         _SB_GETVALUE(x, S_DMA_ETHRX_RXCH, M_DMA_ETHRX_RXCH)
+#define S_DMA_ETHRX_RXCH	    53
+#define M_DMA_ETHRX_RXCH	    _SB_MAKEMASK(2, S_DMA_ETHRX_RXCH)
+#define V_DMA_ETHRX_RXCH(x)	    _SB_MAKEVALUE(x, S_DMA_ETHRX_RXCH)
+#define G_DMA_ETHRX_RXCH(x)	    _SB_GETVALUE(x, S_DMA_ETHRX_RXCH, M_DMA_ETHRX_RXCH)
 
-#define S_DMA_ETHRX_PKTTYPE         55
-#define M_DMA_ETHRX_PKTTYPE         _SB_MAKEMASK(3, S_DMA_ETHRX_PKTTYPE)
-#define V_DMA_ETHRX_PKTTYPE(x)      _SB_MAKEVALUE(x, S_DMA_ETHRX_PKTTYPE)
-#define G_DMA_ETHRX_PKTTYPE(x)      _SB_GETVALUE(x, S_DMA_ETHRX_PKTTYPE, M_DMA_ETHRX_PKTTYPE)
+#define S_DMA_ETHRX_PKTTYPE	    55
+#define M_DMA_ETHRX_PKTTYPE	    _SB_MAKEMASK(3, S_DMA_ETHRX_PKTTYPE)
+#define V_DMA_ETHRX_PKTTYPE(x)	    _SB_MAKEVALUE(x, S_DMA_ETHRX_PKTTYPE)
+#define G_DMA_ETHRX_PKTTYPE(x)	    _SB_GETVALUE(x, S_DMA_ETHRX_PKTTYPE, M_DMA_ETHRX_PKTTYPE)
 
 #define K_DMA_ETHRX_PKTTYPE_IPV4    0
 #define K_DMA_ETHRX_PKTTYPE_ARPV4   1
-#define K_DMA_ETHRX_PKTTYPE_802     2
+#define K_DMA_ETHRX_PKTTYPE_802	    2
 #define K_DMA_ETHRX_PKTTYPE_OTHER   3
 #define K_DMA_ETHRX_PKTTYPE_USER0   4
 #define K_DMA_ETHRX_PKTTYPE_USER1   5
 #define K_DMA_ETHRX_PKTTYPE_USER2   6
 #define K_DMA_ETHRX_PKTTYPE_USER3   7
 
-#define M_DMA_ETHRX_MATCH_HASH      _SB_MAKEMASK1(58)
-#define M_DMA_ETHRX_MATCH_EXACT     _SB_MAKEMASK1(59)
-#define M_DMA_ETHRX_BCAST           _SB_MAKEMASK1(60)
-#define M_DMA_ETHRX_MCAST           _SB_MAKEMASK1(61)
-#define M_DMA_ETHRX_BAD	            _SB_MAKEMASK1(62)
-#define M_DMA_ETHRX_SOP             _SB_MAKEMASK1(63)
+#define M_DMA_ETHRX_MATCH_HASH	    _SB_MAKEMASK1(58)
+#define M_DMA_ETHRX_MATCH_EXACT	    _SB_MAKEMASK1(59)
+#define M_DMA_ETHRX_BCAST	    _SB_MAKEMASK1(60)
+#define M_DMA_ETHRX_MCAST	    _SB_MAKEMASK1(61)
+#define M_DMA_ETHRX_BAD		    _SB_MAKEMASK1(62)
+#define M_DMA_ETHRX_SOP		    _SB_MAKEMASK1(63)
 
 /*
  * Ethernet Transmit Status Bits (Table 7-16)
  */
 
-#define M_DMA_ETHTX_SOP	    	    _SB_MAKEMASK1(63)
+#define M_DMA_ETHTX_SOP		    _SB_MAKEMASK1(63)
 
 /*
  * Ethernet Transmit Options (Table 7-17)
  */
 
-#define K_DMA_ETHTX_NOTSOP          _SB_MAKE64(0x00)
-#define K_DMA_ETHTX_APPENDCRC       _SB_MAKE64(0x01)
-#define K_DMA_ETHTX_REPLACECRC      _SB_MAKE64(0x02)
+#define K_DMA_ETHTX_NOTSOP	    _SB_MAKE64(0x00)
+#define K_DMA_ETHTX_APPENDCRC	    _SB_MAKE64(0x01)
+#define K_DMA_ETHTX_REPLACECRC	    _SB_MAKE64(0x02)
 #define K_DMA_ETHTX_APPENDCRC_APPENDPAD _SB_MAKE64(0x03)
 #define K_DMA_ETHTX_APPENDVLAN_REPLACECRC _SB_MAKE64(0x04)
 #define K_DMA_ETHTX_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x05)
 #define K_DMA_ETHTX_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x6)
-#define K_DMA_ETHTX_NOMODS          _SB_MAKE64(0x07)
-#define K_DMA_ETHTX_RESERVED1       _SB_MAKE64(0x08)
+#define K_DMA_ETHTX_NOMODS	    _SB_MAKE64(0x07)
+#define K_DMA_ETHTX_RESERVED1	    _SB_MAKE64(0x08)
 #define K_DMA_ETHTX_REPLACESADDR_APPENDCRC _SB_MAKE64(0x09)
 #define K_DMA_ETHTX_REPLACESADDR_REPLACECRC _SB_MAKE64(0x0A)
 #define K_DMA_ETHTX_REPLACESADDR_APPENDCRC_APPENDPAD _SB_MAKE64(0x0B)
 #define K_DMA_ETHTX_REPLACESADDR_APPENDVLAN_REPLACECRC _SB_MAKE64(0x0C)
 #define K_DMA_ETHTX_REPLACESADDR_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x0D)
 #define K_DMA_ETHTX_REPLACESADDR_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x0E)
-#define K_DMA_ETHTX_RESERVED2       _SB_MAKE64(0x0F)
+#define K_DMA_ETHTX_RESERVED2	    _SB_MAKE64(0x0F)
 
 /*
  * Serial Receive Options (Table 7-18)
  */
-#define M_DMA_SERRX_CRC_ERROR       _SB_MAKEMASK1(56)
-#define M_DMA_SERRX_ABORT           _SB_MAKEMASK1(57)
-#define M_DMA_SERRX_OCTET_ERROR     _SB_MAKEMASK1(58)
+#define M_DMA_SERRX_CRC_ERROR	    _SB_MAKEMASK1(56)
+#define M_DMA_SERRX_ABORT	    _SB_MAKEMASK1(57)
+#define M_DMA_SERRX_OCTET_ERROR	    _SB_MAKEMASK1(58)
 #define M_DMA_SERRX_LONGFRAME_ERROR _SB_MAKEMASK1(59)
 #define M_DMA_SERRX_SHORTFRAME_ERROR _SB_MAKEMASK1(60)
 #define M_DMA_SERRX_OVERRUN_ERROR   _SB_MAKEMASK1(61)
-#define M_DMA_SERRX_GOOD            _SB_MAKEMASK1(62)
-#define M_DMA_SERRX_SOP             _SB_MAKEMASK1(63)
+#define M_DMA_SERRX_GOOD	    _SB_MAKEMASK1(62)
+#define M_DMA_SERRX_SOP		    _SB_MAKEMASK1(63)
 
 /*
  * Serial Transmit Status Bits (Table 7-20)
@@ -367,10 +367,10 @@
  * Serial Transmit Options (Table 7-21)
  */
 
-#define K_DMA_SERTX_RESERVED        _SB_MAKEMASK1(0)
-#define K_DMA_SERTX_APPENDCRC       _SB_MAKEMASK1(1)
-#define K_DMA_SERTX_APPENDPAD       _SB_MAKEMASK1(2)
-#define K_DMA_SERTX_ABORT           _SB_MAKEMASK1(3)
+#define K_DMA_SERTX_RESERVED	    _SB_MAKEMASK1(0)
+#define K_DMA_SERTX_APPENDCRC	    _SB_MAKEMASK1(1)
+#define K_DMA_SERTX_APPENDPAD	    _SB_MAKEMASK1(2)
+#define K_DMA_SERTX_ABORT	    _SB_MAKEMASK1(3)
 
 
 /*  *********************************************************************
@@ -385,19 +385,19 @@
  * Register: DM_DSCR_BASE_3
  */
 
-#define M_DM_DSCR_BASE_MBZ          _SB_MAKEMASK(4, 0)
+#define M_DM_DSCR_BASE_MBZ	    _SB_MAKEMASK(4, 0)
 
 /*  Note: Just mask the base address and then OR it in. */
-#define S_DM_DSCR_BASE_ADDR         _SB_MAKE64(4)
-#define M_DM_DSCR_BASE_ADDR         _SB_MAKEMASK(36, S_DM_DSCR_BASE_ADDR)
+#define S_DM_DSCR_BASE_ADDR	    _SB_MAKE64(4)
+#define M_DM_DSCR_BASE_ADDR	    _SB_MAKEMASK(36, S_DM_DSCR_BASE_ADDR)
 
-#define S_DM_DSCR_BASE_RINGSZ       _SB_MAKE64(40)
-#define M_DM_DSCR_BASE_RINGSZ       _SB_MAKEMASK(16, S_DM_DSCR_BASE_RINGSZ)
+#define S_DM_DSCR_BASE_RINGSZ	    _SB_MAKE64(40)
+#define M_DM_DSCR_BASE_RINGSZ	    _SB_MAKEMASK(16, S_DM_DSCR_BASE_RINGSZ)
 #define V_DM_DSCR_BASE_RINGSZ(x)    _SB_MAKEVALUE(x, S_DM_DSCR_BASE_RINGSZ)
 #define G_DM_DSCR_BASE_RINGSZ(x)    _SB_GETVALUE(x, S_DM_DSCR_BASE_RINGSZ, M_DM_DSCR_BASE_RINGSZ)
 
-#define S_DM_DSCR_BASE_PRIORITY     _SB_MAKE64(56)
-#define M_DM_DSCR_BASE_PRIORITY     _SB_MAKEMASK(3, S_DM_DSCR_BASE_PRIORITY)
+#define S_DM_DSCR_BASE_PRIORITY	    _SB_MAKE64(56)
+#define M_DM_DSCR_BASE_PRIORITY	    _SB_MAKEMASK(3, S_DM_DSCR_BASE_PRIORITY)
 #define V_DM_DSCR_BASE_PRIORITY(x)  _SB_MAKEVALUE(x, S_DM_DSCR_BASE_PRIORITY)
 #define G_DM_DSCR_BASE_PRIORITY(x)  _SB_GETVALUE(x, S_DM_DSCR_BASE_PRIORITY, M_DM_DSCR_BASE_PRIORITY)
 
@@ -407,12 +407,12 @@
 #define K_DM_DSCR_BASE_PRIORITY_8   3
 #define K_DM_DSCR_BASE_PRIORITY_16  4
 
-#define M_DM_DSCR_BASE_ACTIVE       _SB_MAKEMASK1(59)
+#define M_DM_DSCR_BASE_ACTIVE	    _SB_MAKEMASK1(59)
 #define M_DM_DSCR_BASE_INTERRUPT    _SB_MAKEMASK1(60)
-#define M_DM_DSCR_BASE_RESET        _SB_MAKEMASK1(61)	/* write register */
-#define M_DM_DSCR_BASE_ERROR        _SB_MAKEMASK1(61)	/* read register */
-#define M_DM_DSCR_BASE_ABORT        _SB_MAKEMASK1(62)
-#define M_DM_DSCR_BASE_ENABL        _SB_MAKEMASK1(63)
+#define M_DM_DSCR_BASE_RESET	    _SB_MAKEMASK1(61)	/* write register */
+#define M_DM_DSCR_BASE_ERROR	    _SB_MAKEMASK1(61)	/* read register */
+#define M_DM_DSCR_BASE_ABORT	    _SB_MAKEMASK1(62)
+#define M_DM_DSCR_BASE_ENABL	    _SB_MAKEMASK1(63)
 
 /*
  * Data Mover Descriptor Count Register (Table 7-25)
@@ -428,14 +428,14 @@
  * Register: DM_CUR_DSCR_ADDR_3
  */
 
-#define S_DM_CUR_DSCR_DSCR_ADDR     _SB_MAKE64(0)
-#define M_DM_CUR_DSCR_DSCR_ADDR     _SB_MAKEMASK(40, S_DM_CUR_DSCR_DSCR_ADDR)
+#define S_DM_CUR_DSCR_DSCR_ADDR	    _SB_MAKE64(0)
+#define M_DM_CUR_DSCR_DSCR_ADDR	    _SB_MAKEMASK(40, S_DM_CUR_DSCR_DSCR_ADDR)
 
 #define S_DM_CUR_DSCR_DSCR_COUNT    _SB_MAKE64(48)
 #define M_DM_CUR_DSCR_DSCR_COUNT    _SB_MAKEMASK(16, S_DM_CUR_DSCR_DSCR_COUNT)
 #define V_DM_CUR_DSCR_DSCR_COUNT(r) _SB_MAKEVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT)
 #define G_DM_CUR_DSCR_DSCR_COUNT(r) _SB_GETVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT,\
-                                     M_DM_CUR_DSCR_DSCR_COUNT)
+				     M_DM_CUR_DSCR_DSCR_COUNT)
 
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
@@ -450,15 +450,15 @@
 #define M_DM_PARTIAL_CRC_PARTIAL      _SB_MAKEMASK(32, S_DM_PARTIAL_CRC_PARTIAL)
 #define V_DM_PARTIAL_CRC_PARTIAL(r)   _SB_MAKEVALUE(r, S_DM_PARTIAL_CRC_PARTIAL)
 #define G_DM_PARTIAL_CRC_PARTIAL(r)   _SB_GETVALUE(r, S_DM_PARTIAL_CRC_PARTIAL,\
-                                       M_DM_PARTIAL_CRC_PARTIAL)
+				       M_DM_PARTIAL_CRC_PARTIAL)
 
 #define S_DM_PARTIAL_TCPCS_PARTIAL    _SB_MAKE64(32)
 #define M_DM_PARTIAL_TCPCS_PARTIAL    _SB_MAKEMASK(16, S_DM_PARTIAL_TCPCS_PARTIAL)
 #define V_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_MAKEVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL)
 #define G_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_GETVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL,\
-                                       M_DM_PARTIAL_TCPCS_PARTIAL)
+				       M_DM_PARTIAL_TCPCS_PARTIAL)
 
-#define M_DM_PARTIAL_ODD_BYTE         _SB_MAKEMASK1(48)
+#define M_DM_PARTIAL_ODD_BYTE	      _SB_MAKEMASK1(48)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
 
@@ -468,17 +468,17 @@
  * Register: CRC_DEF_0
  * Register: CRC_DEF_1
  */
-#define S_CRC_DEF_CRC_INIT            _SB_MAKE64(0)
-#define M_CRC_DEF_CRC_INIT            _SB_MAKEMASK(32, S_CRC_DEF_CRC_INIT)
-#define V_CRC_DEF_CRC_INIT(r)         _SB_MAKEVALUE(r, S_CRC_DEF_CRC_INIT)
-#define G_CRC_DEF_CRC_INIT(r)         _SB_GETVALUE(r, S_CRC_DEF_CRC_INIT,\
-                                       M_CRC_DEF_CRC_INIT)
+#define S_CRC_DEF_CRC_INIT	      _SB_MAKE64(0)
+#define M_CRC_DEF_CRC_INIT	      _SB_MAKEMASK(32, S_CRC_DEF_CRC_INIT)
+#define V_CRC_DEF_CRC_INIT(r)	      _SB_MAKEVALUE(r, S_CRC_DEF_CRC_INIT)
+#define G_CRC_DEF_CRC_INIT(r)	      _SB_GETVALUE(r, S_CRC_DEF_CRC_INIT,\
+				       M_CRC_DEF_CRC_INIT)
 
-#define S_CRC_DEF_CRC_POLY            _SB_MAKE64(32)
-#define M_CRC_DEF_CRC_POLY            _SB_MAKEMASK(32, S_CRC_DEF_CRC_POLY)
-#define V_CRC_DEF_CRC_POLY(r)         _SB_MAKEVALUE(r, S_CRC_DEF_CRC_POLY)
-#define G_CRC_DEF_CRC_POLY(r)         _SB_GETVALUE(r, S_CRC_DEF_CRC_POLY,\
-                                       M_CRC_DEF_CRC_POLY)
+#define S_CRC_DEF_CRC_POLY	      _SB_MAKE64(32)
+#define M_CRC_DEF_CRC_POLY	      _SB_MAKEMASK(32, S_CRC_DEF_CRC_POLY)
+#define V_CRC_DEF_CRC_POLY(r)	      _SB_MAKEVALUE(r, S_CRC_DEF_CRC_POLY)
+#define G_CRC_DEF_CRC_POLY(r)	      _SB_GETVALUE(r, S_CRC_DEF_CRC_POLY,\
+				       M_CRC_DEF_CRC_POLY)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
 
@@ -488,50 +488,50 @@
  * Register: CTCP_DEF_0
  * Register: CTCP_DEF_1
  */
-#define S_CTCP_DEF_CRC_TXOR           _SB_MAKE64(0)
-#define M_CTCP_DEF_CRC_TXOR           _SB_MAKEMASK(32, S_CTCP_DEF_CRC_TXOR)
-#define V_CTCP_DEF_CRC_TXOR(r)        _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_TXOR)
-#define G_CTCP_DEF_CRC_TXOR(r)        _SB_GETVALUE(r, S_CTCP_DEF_CRC_TXOR,\
-                                       M_CTCP_DEF_CRC_TXOR)
+#define S_CTCP_DEF_CRC_TXOR	      _SB_MAKE64(0)
+#define M_CTCP_DEF_CRC_TXOR	      _SB_MAKEMASK(32, S_CTCP_DEF_CRC_TXOR)
+#define V_CTCP_DEF_CRC_TXOR(r)	      _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_TXOR)
+#define G_CTCP_DEF_CRC_TXOR(r)	      _SB_GETVALUE(r, S_CTCP_DEF_CRC_TXOR,\
+				       M_CTCP_DEF_CRC_TXOR)
 
-#define S_CTCP_DEF_TCPCS_INIT         _SB_MAKE64(32)
-#define M_CTCP_DEF_TCPCS_INIT         _SB_MAKEMASK(16, S_CTCP_DEF_TCPCS_INIT)
+#define S_CTCP_DEF_TCPCS_INIT	      _SB_MAKE64(32)
+#define M_CTCP_DEF_TCPCS_INIT	      _SB_MAKEMASK(16, S_CTCP_DEF_TCPCS_INIT)
 #define V_CTCP_DEF_TCPCS_INIT(r)      _SB_MAKEVALUE(r, S_CTCP_DEF_TCPCS_INIT)
 #define G_CTCP_DEF_TCPCS_INIT(r)      _SB_GETVALUE(r, S_CTCP_DEF_TCPCS_INIT,\
-                                       M_CTCP_DEF_TCPCS_INIT)
+				       M_CTCP_DEF_TCPCS_INIT)
 
-#define S_CTCP_DEF_CRC_WIDTH          _SB_MAKE64(48)
-#define M_CTCP_DEF_CRC_WIDTH          _SB_MAKEMASK(2, S_CTCP_DEF_CRC_WIDTH)
-#define V_CTCP_DEF_CRC_WIDTH(r)       _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_WIDTH)
-#define G_CTCP_DEF_CRC_WIDTH(r)       _SB_GETVALUE(r, S_CTCP_DEF_CRC_WIDTH,\
-                                       M_CTCP_DEF_CRC_WIDTH)
+#define S_CTCP_DEF_CRC_WIDTH	      _SB_MAKE64(48)
+#define M_CTCP_DEF_CRC_WIDTH	      _SB_MAKEMASK(2, S_CTCP_DEF_CRC_WIDTH)
+#define V_CTCP_DEF_CRC_WIDTH(r)	      _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_WIDTH)
+#define G_CTCP_DEF_CRC_WIDTH(r)	      _SB_GETVALUE(r, S_CTCP_DEF_CRC_WIDTH,\
+				       M_CTCP_DEF_CRC_WIDTH)
 
-#define K_CTCP_DEF_CRC_WIDTH_4        0
-#define K_CTCP_DEF_CRC_WIDTH_2        1
-#define K_CTCP_DEF_CRC_WIDTH_1        2
+#define K_CTCP_DEF_CRC_WIDTH_4	      0
+#define K_CTCP_DEF_CRC_WIDTH_2	      1
+#define K_CTCP_DEF_CRC_WIDTH_1	      2
 
 #define M_CTCP_DEF_CRC_BIT_ORDER      _SB_MAKEMASK1(50)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
 
 /*
- * Data Mover Descriptor Doubleword "A"  (Table 7-26)
+ * Data Mover Descriptor Doubleword "A"	 (Table 7-26)
  */
 
-#define S_DM_DSCRA_DST_ADDR         _SB_MAKE64(0)
-#define M_DM_DSCRA_DST_ADDR         _SB_MAKEMASK(40, S_DM_DSCRA_DST_ADDR)
+#define S_DM_DSCRA_DST_ADDR	    _SB_MAKE64(0)
+#define M_DM_DSCRA_DST_ADDR	    _SB_MAKEMASK(40, S_DM_DSCRA_DST_ADDR)
 
-#define M_DM_DSCRA_UN_DEST          _SB_MAKEMASK1(40)
-#define M_DM_DSCRA_UN_SRC           _SB_MAKEMASK1(41)
-#define M_DM_DSCRA_INTERRUPT        _SB_MAKEMASK1(42)
+#define M_DM_DSCRA_UN_DEST	    _SB_MAKEMASK1(40)
+#define M_DM_DSCRA_UN_SRC	    _SB_MAKEMASK1(41)
+#define M_DM_DSCRA_INTERRUPT	    _SB_MAKEMASK1(42)
 #if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
-#define M_DM_DSCRA_THROTTLE         _SB_MAKEMASK1(43)
+#define M_DM_DSCRA_THROTTLE	    _SB_MAKEMASK1(43)
 #endif /* up to 1250 PASS1 */
 
-#define S_DM_DSCRA_DIR_DEST         _SB_MAKE64(44)
-#define M_DM_DSCRA_DIR_DEST         _SB_MAKEMASK(2, S_DM_DSCRA_DIR_DEST)
-#define V_DM_DSCRA_DIR_DEST(x)      _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_DEST)
-#define G_DM_DSCRA_DIR_DEST(x)      _SB_GETVALUE(x, S_DM_DSCRA_DIR_DEST, M_DM_DSCRA_DIR_DEST)
+#define S_DM_DSCRA_DIR_DEST	    _SB_MAKE64(44)
+#define M_DM_DSCRA_DIR_DEST	    _SB_MAKEMASK(2, S_DM_DSCRA_DIR_DEST)
+#define V_DM_DSCRA_DIR_DEST(x)	    _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_DEST)
+#define G_DM_DSCRA_DIR_DEST(x)	    _SB_GETVALUE(x, S_DM_DSCRA_DIR_DEST, M_DM_DSCRA_DIR_DEST)
 
 #define K_DM_DSCRA_DIR_DEST_INCR    0
 #define K_DM_DSCRA_DIR_DEST_DECR    1
@@ -541,24 +541,24 @@
 #define V_DM_DSCRA_DIR_DEST_DECR    _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_DECR, S_DM_DSCRA_DIR_DEST)
 #define V_DM_DSCRA_DIR_DEST_CONST   _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_CONST, S_DM_DSCRA_DIR_DEST)
 
-#define S_DM_DSCRA_DIR_SRC          _SB_MAKE64(46)
-#define M_DM_DSCRA_DIR_SRC          _SB_MAKEMASK(2, S_DM_DSCRA_DIR_SRC)
-#define V_DM_DSCRA_DIR_SRC(x)       _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_SRC)
-#define G_DM_DSCRA_DIR_SRC(x)       _SB_GETVALUE(x, S_DM_DSCRA_DIR_SRC, M_DM_DSCRA_DIR_SRC)
+#define S_DM_DSCRA_DIR_SRC	    _SB_MAKE64(46)
+#define M_DM_DSCRA_DIR_SRC	    _SB_MAKEMASK(2, S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC(x)	    _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_SRC)
+#define G_DM_DSCRA_DIR_SRC(x)	    _SB_GETVALUE(x, S_DM_DSCRA_DIR_SRC, M_DM_DSCRA_DIR_SRC)
 
-#define K_DM_DSCRA_DIR_SRC_INCR     0
-#define K_DM_DSCRA_DIR_SRC_DECR     1
+#define K_DM_DSCRA_DIR_SRC_INCR	    0
+#define K_DM_DSCRA_DIR_SRC_DECR	    1
 #define K_DM_DSCRA_DIR_SRC_CONST    2
 
-#define V_DM_DSCRA_DIR_SRC_INCR     _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_INCR, S_DM_DSCRA_DIR_SRC)
-#define V_DM_DSCRA_DIR_SRC_DECR     _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_DECR, S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC_INCR	    _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_INCR, S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC_DECR	    _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_DECR, S_DM_DSCRA_DIR_SRC)
 #define V_DM_DSCRA_DIR_SRC_CONST    _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_CONST, S_DM_DSCRA_DIR_SRC)
 
 
-#define M_DM_DSCRA_ZERO_MEM         _SB_MAKEMASK1(48)
-#define M_DM_DSCRA_PREFETCH         _SB_MAKEMASK1(49)
-#define M_DM_DSCRA_L2C_DEST         _SB_MAKEMASK1(50)
-#define M_DM_DSCRA_L2C_SRC          _SB_MAKEMASK1(51)
+#define M_DM_DSCRA_ZERO_MEM	    _SB_MAKEMASK1(48)
+#define M_DM_DSCRA_PREFETCH	    _SB_MAKEMASK1(49)
+#define M_DM_DSCRA_L2C_DEST	    _SB_MAKEMASK1(50)
+#define M_DM_DSCRA_L2C_SRC	    _SB_MAKEMASK1(51)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_DM_DSCRA_RD_BKOFF	    _SB_MAKEMASK1(52)
@@ -566,27 +566,27 @@
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define M_DM_DSCRA_TCPCS_EN         _SB_MAKEMASK1(54)
-#define M_DM_DSCRA_TCPCS_RES        _SB_MAKEMASK1(55)
-#define M_DM_DSCRA_TCPCS_AP         _SB_MAKEMASK1(56)
-#define M_DM_DSCRA_CRC_EN           _SB_MAKEMASK1(57)
-#define M_DM_DSCRA_CRC_RES          _SB_MAKEMASK1(58)
-#define M_DM_DSCRA_CRC_AP           _SB_MAKEMASK1(59)
-#define M_DM_DSCRA_CRC_DFN          _SB_MAKEMASK1(60)
-#define M_DM_DSCRA_CRC_XBIT         _SB_MAKEMASK1(61)
+#define M_DM_DSCRA_TCPCS_EN	    _SB_MAKEMASK1(54)
+#define M_DM_DSCRA_TCPCS_RES	    _SB_MAKEMASK1(55)
+#define M_DM_DSCRA_TCPCS_AP	    _SB_MAKEMASK1(56)
+#define M_DM_DSCRA_CRC_EN	    _SB_MAKEMASK1(57)
+#define M_DM_DSCRA_CRC_RES	    _SB_MAKEMASK1(58)
+#define M_DM_DSCRA_CRC_AP	    _SB_MAKEMASK1(59)
+#define M_DM_DSCRA_CRC_DFN	    _SB_MAKEMASK1(60)
+#define M_DM_DSCRA_CRC_XBIT	    _SB_MAKEMASK1(61)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
-#define M_DM_DSCRA_RESERVED2        _SB_MAKEMASK(3, 61)
+#define M_DM_DSCRA_RESERVED2	    _SB_MAKEMASK(3, 61)
 
 /*
- * Data Mover Descriptor Doubleword "B"  (Table 7-25)
+ * Data Mover Descriptor Doubleword "B"	 (Table 7-25)
  */
 
-#define S_DM_DSCRB_SRC_ADDR         _SB_MAKE64(0)
-#define M_DM_DSCRB_SRC_ADDR         _SB_MAKEMASK(40, S_DM_DSCRB_SRC_ADDR)
+#define S_DM_DSCRB_SRC_ADDR	    _SB_MAKE64(0)
+#define M_DM_DSCRB_SRC_ADDR	    _SB_MAKEMASK(40, S_DM_DSCRB_SRC_ADDR)
 
-#define S_DM_DSCRB_SRC_LENGTH       _SB_MAKE64(40)
-#define M_DM_DSCRB_SRC_LENGTH       _SB_MAKEMASK(20, S_DM_DSCRB_SRC_LENGTH)
+#define S_DM_DSCRB_SRC_LENGTH	    _SB_MAKE64(40)
+#define M_DM_DSCRB_SRC_LENGTH	    _SB_MAKEMASK(20, S_DM_DSCRB_SRC_LENGTH)
 #define V_DM_DSCRB_SRC_LENGTH(x)    _SB_MAKEVALUE(x, S_DM_DSCRB_SRC_LENGTH)
 #define G_DM_DSCRB_SRC_LENGTH(x)    _SB_GETVALUE(x, S_DM_DSCRB_SRC_LENGTH, M_DM_DSCRB_SRC_LENGTH)
 
diff --git a/arch/mips/include/asm/sibyte/sb1250_genbus.h b/arch/mips/include/asm/sibyte/sb1250_genbus.h
index a96ded1..04c009c 100644
--- a/arch/mips/include/asm/sibyte/sb1250_genbus.h
+++ b/arch/mips/include/asm/sibyte/sb1250_genbus.h
@@ -1,7 +1,7 @@
 /*  *********************************************************************
     *  SB1250 Board Support Package
     *
-    *  Generic Bus Constants                     File: sb1250_genbus.h
+    *  Generic Bus Constants			 File: sb1250_genbus.h
     *
     *  This module contains constants and macros useful for
     *  manipulating the SB1250's Generic Bus interface
@@ -40,10 +40,10 @@
  * Generic Bus Region Configuration Registers (Table 11-4)
  */
 
-#define S_IO_RDY_ACTIVE         0
+#define S_IO_RDY_ACTIVE		0
 #define M_IO_RDY_ACTIVE		_SB_MAKEMASK1(S_IO_RDY_ACTIVE)
 
-#define S_IO_ENA_RDY            1
+#define S_IO_ENA_RDY		1
 #define M_IO_ENA_RDY		_SB_MAKEMASK1(S_IO_ENA_RDY)
 
 #define S_IO_WIDTH_SEL		2
@@ -52,7 +52,7 @@
 #define K_IO_WIDTH_SEL_2	1
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
     || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define K_IO_WIDTH_SEL_1L       2
+#define K_IO_WIDTH_SEL_1L	2
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 #define K_IO_WIDTH_SEL_4	3
 #define V_IO_WIDTH_SEL(x)	_SB_MAKEVALUE(x, S_IO_WIDTH_SEL)
@@ -111,7 +111,7 @@
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
     || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define M_IO_EARLY_CS	        _SB_MAKEMASK1(3)
+#define M_IO_EARLY_CS		_SB_MAKEMASK1(3)
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 #define S_IO_ALE_TO_CS		4
@@ -121,10 +121,10 @@
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
     || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define S_IO_BURST_WIDTH           _SB_MAKE64(6)
-#define M_IO_BURST_WIDTH           _SB_MAKEMASK(2, S_IO_BURST_WIDTH)
-#define V_IO_BURST_WIDTH(x)        _SB_MAKEVALUE(x, S_IO_BURST_WIDTH)
-#define G_IO_BURST_WIDTH(x)        _SB_GETVALUE(x, S_IO_BURST_WIDTH, M_IO_BURST_WIDTH)
+#define S_IO_BURST_WIDTH	   _SB_MAKE64(6)
+#define M_IO_BURST_WIDTH	   _SB_MAKEMASK(2, S_IO_BURST_WIDTH)
+#define V_IO_BURST_WIDTH(x)	   _SB_MAKEVALUE(x, S_IO_BURST_WIDTH)
+#define G_IO_BURST_WIDTH(x)	   _SB_GETVALUE(x, S_IO_BURST_WIDTH, M_IO_BURST_WIDTH)
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 #define S_IO_CS_WIDTH		8
@@ -149,7 +149,7 @@
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
     || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define M_IO_RDY_SYNC	        _SB_MAKEMASK1(3)
+#define M_IO_RDY_SYNC		_SB_MAKEMASK1(3)
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 #define S_IO_WRITE_WIDTH	4
@@ -191,7 +191,7 @@
 #define M_IO_ILL_ADDR_INT	_SB_MAKEMASK1(11)
 #define M_IO_MULT_CS_INT	_SB_MAKEMASK1(12)
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define M_IO_COH_ERR	        _SB_MAKEMASK1(14)
+#define M_IO_COH_ERR		_SB_MAKEMASK1(14)
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 
@@ -370,8 +370,8 @@
 
 #define S_GPIO_INTR_TYPEX(n)	(((n)/2)*2)
 #define M_GPIO_INTR_TYPEX(n)	_SB_MAKEMASK(2, S_GPIO_INTR_TYPEX(n))
-#define V_GPIO_INTR_TYPEX(n, x)	_SB_MAKEVALUE(x, S_GPIO_INTR_TYPEX(n))
-#define G_GPIO_INTR_TYPEX(n, x)	_SB_GETVALUE(x, S_GPIO_INTR_TYPEX(n), M_GPIO_INTR_TYPEX(n))
+#define V_GPIO_INTR_TYPEX(n, x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPEX(n))
+#define G_GPIO_INTR_TYPEX(n, x) _SB_GETVALUE(x, S_GPIO_INTR_TYPEX(n), M_GPIO_INTR_TYPEX(n))
 
 #define S_GPIO_INTR_TYPE0	0
 #define M_GPIO_INTR_TYPE0	_SB_MAKEMASK(2, S_GPIO_INTR_TYPE0)
diff --git a/arch/mips/include/asm/sibyte/sb1250_int.h b/arch/mips/include/asm/sibyte/sb1250_int.h
index dbea73d..36afcb2 100644
--- a/arch/mips/include/asm/sibyte/sb1250_int.h
+++ b/arch/mips/include/asm/sibyte/sb1250_int.h
@@ -45,71 +45,71 @@
  * First, the interrupt numbers.
  */
 
-#define K_INT_SOURCES               64
+#define K_INT_SOURCES		    64
 
-#define K_INT_WATCHDOG_TIMER_0      0
-#define K_INT_WATCHDOG_TIMER_1      1
-#define K_INT_TIMER_0               2
-#define K_INT_TIMER_1               3
-#define K_INT_TIMER_2               4
-#define K_INT_TIMER_3               5
-#define K_INT_SMB_0                 6
-#define K_INT_SMB_1                 7
-#define K_INT_UART_0                8
-#define K_INT_UART_1                9
-#define K_INT_SER_0                 10
-#define K_INT_SER_1                 11
-#define K_INT_PCMCIA                12
-#define K_INT_ADDR_TRAP             13
-#define K_INT_PERF_CNT              14
-#define K_INT_TRACE_FREEZE          15
-#define K_INT_BAD_ECC               16
-#define K_INT_COR_ECC               17
-#define K_INT_IO_BUS                18
-#define K_INT_MAC_0                 19
-#define K_INT_MAC_1                 20
-#define K_INT_MAC_2                 21
-#define K_INT_DM_CH_0               22
-#define K_INT_DM_CH_1               23
-#define K_INT_DM_CH_2               24
-#define K_INT_DM_CH_3               25
-#define K_INT_MBOX_0                26
-#define K_INT_MBOX_1                27
-#define K_INT_MBOX_2                28
-#define K_INT_MBOX_3                29
+#define K_INT_WATCHDOG_TIMER_0	    0
+#define K_INT_WATCHDOG_TIMER_1	    1
+#define K_INT_TIMER_0		    2
+#define K_INT_TIMER_1		    3
+#define K_INT_TIMER_2		    4
+#define K_INT_TIMER_3		    5
+#define K_INT_SMB_0		    6
+#define K_INT_SMB_1		    7
+#define K_INT_UART_0		    8
+#define K_INT_UART_1		    9
+#define K_INT_SER_0		    10
+#define K_INT_SER_1		    11
+#define K_INT_PCMCIA		    12
+#define K_INT_ADDR_TRAP		    13
+#define K_INT_PERF_CNT		    14
+#define K_INT_TRACE_FREEZE	    15
+#define K_INT_BAD_ECC		    16
+#define K_INT_COR_ECC		    17
+#define K_INT_IO_BUS		    18
+#define K_INT_MAC_0		    19
+#define K_INT_MAC_1		    20
+#define K_INT_MAC_2		    21
+#define K_INT_DM_CH_0		    22
+#define K_INT_DM_CH_1		    23
+#define K_INT_DM_CH_2		    24
+#define K_INT_DM_CH_3		    25
+#define K_INT_MBOX_0		    26
+#define K_INT_MBOX_1		    27
+#define K_INT_MBOX_2		    28
+#define K_INT_MBOX_3		    29
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define K_INT_CYCLE_CP0_INT	    30
 #define K_INT_CYCLE_CP1_INT	    31
 #endif /* 1250 PASS2 || 112x PASS1 */
-#define K_INT_GPIO_0                32
-#define K_INT_GPIO_1                33
-#define K_INT_GPIO_2                34
-#define K_INT_GPIO_3                35
-#define K_INT_GPIO_4                36
-#define K_INT_GPIO_5                37
-#define K_INT_GPIO_6                38
-#define K_INT_GPIO_7                39
-#define K_INT_GPIO_8                40
-#define K_INT_GPIO_9                41
-#define K_INT_GPIO_10               42
-#define K_INT_GPIO_11               43
-#define K_INT_GPIO_12               44
-#define K_INT_GPIO_13               45
-#define K_INT_GPIO_14               46
-#define K_INT_GPIO_15               47
-#define K_INT_LDT_FATAL             48
-#define K_INT_LDT_NONFATAL          49
-#define K_INT_LDT_SMI               50
-#define K_INT_LDT_NMI               51
-#define K_INT_LDT_INIT              52
-#define K_INT_LDT_STARTUP           53
-#define K_INT_LDT_EXT               54
-#define K_INT_PCI_ERROR             55
-#define K_INT_PCI_INTA              56
-#define K_INT_PCI_INTB              57
-#define K_INT_PCI_INTC              58
-#define K_INT_PCI_INTD              59
-#define K_INT_SPARE_2               60
+#define K_INT_GPIO_0		    32
+#define K_INT_GPIO_1		    33
+#define K_INT_GPIO_2		    34
+#define K_INT_GPIO_3		    35
+#define K_INT_GPIO_4		    36
+#define K_INT_GPIO_5		    37
+#define K_INT_GPIO_6		    38
+#define K_INT_GPIO_7		    39
+#define K_INT_GPIO_8		    40
+#define K_INT_GPIO_9		    41
+#define K_INT_GPIO_10		    42
+#define K_INT_GPIO_11		    43
+#define K_INT_GPIO_12		    44
+#define K_INT_GPIO_13		    45
+#define K_INT_GPIO_14		    46
+#define K_INT_GPIO_15		    47
+#define K_INT_LDT_FATAL		    48
+#define K_INT_LDT_NONFATAL	    49
+#define K_INT_LDT_SMI		    50
+#define K_INT_LDT_NMI		    51
+#define K_INT_LDT_INIT		    52
+#define K_INT_LDT_STARTUP	    53
+#define K_INT_LDT_EXT		    54
+#define K_INT_PCI_ERROR		    55
+#define K_INT_PCI_INTA		    56
+#define K_INT_PCI_INTB		    57
+#define K_INT_PCI_INTC		    58
+#define K_INT_PCI_INTD		    59
+#define K_INT_SPARE_2		    60
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define K_INT_MAC_0_CH1		    61
 #define K_INT_MAC_1_CH1		    62
@@ -120,70 +120,70 @@
  * Mask values for each interrupt
  */
 
-#define M_INT_WATCHDOG_TIMER_0      _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_0)
-#define M_INT_WATCHDOG_TIMER_1      _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_1)
-#define M_INT_TIMER_0               _SB_MAKEMASK1(K_INT_TIMER_0)
-#define M_INT_TIMER_1               _SB_MAKEMASK1(K_INT_TIMER_1)
-#define M_INT_TIMER_2               _SB_MAKEMASK1(K_INT_TIMER_2)
-#define M_INT_TIMER_3               _SB_MAKEMASK1(K_INT_TIMER_3)
-#define M_INT_SMB_0                 _SB_MAKEMASK1(K_INT_SMB_0)
-#define M_INT_SMB_1                 _SB_MAKEMASK1(K_INT_SMB_1)
-#define M_INT_UART_0                _SB_MAKEMASK1(K_INT_UART_0)
-#define M_INT_UART_1                _SB_MAKEMASK1(K_INT_UART_1)
-#define M_INT_SER_0                 _SB_MAKEMASK1(K_INT_SER_0)
-#define M_INT_SER_1                 _SB_MAKEMASK1(K_INT_SER_1)
-#define M_INT_PCMCIA                _SB_MAKEMASK1(K_INT_PCMCIA)
-#define M_INT_ADDR_TRAP             _SB_MAKEMASK1(K_INT_ADDR_TRAP)
-#define M_INT_PERF_CNT              _SB_MAKEMASK1(K_INT_PERF_CNT)
-#define M_INT_TRACE_FREEZE          _SB_MAKEMASK1(K_INT_TRACE_FREEZE)
-#define M_INT_BAD_ECC               _SB_MAKEMASK1(K_INT_BAD_ECC)
-#define M_INT_COR_ECC               _SB_MAKEMASK1(K_INT_COR_ECC)
-#define M_INT_IO_BUS                _SB_MAKEMASK1(K_INT_IO_BUS)
-#define M_INT_MAC_0                 _SB_MAKEMASK1(K_INT_MAC_0)
-#define M_INT_MAC_1                 _SB_MAKEMASK1(K_INT_MAC_1)
-#define M_INT_MAC_2                 _SB_MAKEMASK1(K_INT_MAC_2)
-#define M_INT_DM_CH_0               _SB_MAKEMASK1(K_INT_DM_CH_0)
-#define M_INT_DM_CH_1               _SB_MAKEMASK1(K_INT_DM_CH_1)
-#define M_INT_DM_CH_2               _SB_MAKEMASK1(K_INT_DM_CH_2)
-#define M_INT_DM_CH_3               _SB_MAKEMASK1(K_INT_DM_CH_3)
-#define M_INT_MBOX_0                _SB_MAKEMASK1(K_INT_MBOX_0)
-#define M_INT_MBOX_1                _SB_MAKEMASK1(K_INT_MBOX_1)
-#define M_INT_MBOX_2                _SB_MAKEMASK1(K_INT_MBOX_2)
-#define M_INT_MBOX_3                _SB_MAKEMASK1(K_INT_MBOX_3)
-#define M_INT_MBOX_ALL              _SB_MAKEMASK(4, K_INT_MBOX_0)
+#define M_INT_WATCHDOG_TIMER_0	    _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_0)
+#define M_INT_WATCHDOG_TIMER_1	    _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_1)
+#define M_INT_TIMER_0		    _SB_MAKEMASK1(K_INT_TIMER_0)
+#define M_INT_TIMER_1		    _SB_MAKEMASK1(K_INT_TIMER_1)
+#define M_INT_TIMER_2		    _SB_MAKEMASK1(K_INT_TIMER_2)
+#define M_INT_TIMER_3		    _SB_MAKEMASK1(K_INT_TIMER_3)
+#define M_INT_SMB_0		    _SB_MAKEMASK1(K_INT_SMB_0)
+#define M_INT_SMB_1		    _SB_MAKEMASK1(K_INT_SMB_1)
+#define M_INT_UART_0		    _SB_MAKEMASK1(K_INT_UART_0)
+#define M_INT_UART_1		    _SB_MAKEMASK1(K_INT_UART_1)
+#define M_INT_SER_0		    _SB_MAKEMASK1(K_INT_SER_0)
+#define M_INT_SER_1		    _SB_MAKEMASK1(K_INT_SER_1)
+#define M_INT_PCMCIA		    _SB_MAKEMASK1(K_INT_PCMCIA)
+#define M_INT_ADDR_TRAP		    _SB_MAKEMASK1(K_INT_ADDR_TRAP)
+#define M_INT_PERF_CNT		    _SB_MAKEMASK1(K_INT_PERF_CNT)
+#define M_INT_TRACE_FREEZE	    _SB_MAKEMASK1(K_INT_TRACE_FREEZE)
+#define M_INT_BAD_ECC		    _SB_MAKEMASK1(K_INT_BAD_ECC)
+#define M_INT_COR_ECC		    _SB_MAKEMASK1(K_INT_COR_ECC)
+#define M_INT_IO_BUS		    _SB_MAKEMASK1(K_INT_IO_BUS)
+#define M_INT_MAC_0		    _SB_MAKEMASK1(K_INT_MAC_0)
+#define M_INT_MAC_1		    _SB_MAKEMASK1(K_INT_MAC_1)
+#define M_INT_MAC_2		    _SB_MAKEMASK1(K_INT_MAC_2)
+#define M_INT_DM_CH_0		    _SB_MAKEMASK1(K_INT_DM_CH_0)
+#define M_INT_DM_CH_1		    _SB_MAKEMASK1(K_INT_DM_CH_1)
+#define M_INT_DM_CH_2		    _SB_MAKEMASK1(K_INT_DM_CH_2)
+#define M_INT_DM_CH_3		    _SB_MAKEMASK1(K_INT_DM_CH_3)
+#define M_INT_MBOX_0		    _SB_MAKEMASK1(K_INT_MBOX_0)
+#define M_INT_MBOX_1		    _SB_MAKEMASK1(K_INT_MBOX_1)
+#define M_INT_MBOX_2		    _SB_MAKEMASK1(K_INT_MBOX_2)
+#define M_INT_MBOX_3		    _SB_MAKEMASK1(K_INT_MBOX_3)
+#define M_INT_MBOX_ALL		    _SB_MAKEMASK(4, K_INT_MBOX_0)
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define M_INT_CYCLE_CP0_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT)
 #define M_INT_CYCLE_CP1_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT)
 #endif /* 1250 PASS2 || 112x PASS1 */
-#define M_INT_GPIO_0                _SB_MAKEMASK1(K_INT_GPIO_0)
-#define M_INT_GPIO_1                _SB_MAKEMASK1(K_INT_GPIO_1)
-#define M_INT_GPIO_2                _SB_MAKEMASK1(K_INT_GPIO_2)
-#define M_INT_GPIO_3                _SB_MAKEMASK1(K_INT_GPIO_3)
-#define M_INT_GPIO_4                _SB_MAKEMASK1(K_INT_GPIO_4)
-#define M_INT_GPIO_5                _SB_MAKEMASK1(K_INT_GPIO_5)
-#define M_INT_GPIO_6                _SB_MAKEMASK1(K_INT_GPIO_6)
-#define M_INT_GPIO_7                _SB_MAKEMASK1(K_INT_GPIO_7)
-#define M_INT_GPIO_8                _SB_MAKEMASK1(K_INT_GPIO_8)
-#define M_INT_GPIO_9                _SB_MAKEMASK1(K_INT_GPIO_9)
-#define M_INT_GPIO_10               _SB_MAKEMASK1(K_INT_GPIO_10)
-#define M_INT_GPIO_11               _SB_MAKEMASK1(K_INT_GPIO_11)
-#define M_INT_GPIO_12               _SB_MAKEMASK1(K_INT_GPIO_12)
-#define M_INT_GPIO_13               _SB_MAKEMASK1(K_INT_GPIO_13)
-#define M_INT_GPIO_14               _SB_MAKEMASK1(K_INT_GPIO_14)
-#define M_INT_GPIO_15               _SB_MAKEMASK1(K_INT_GPIO_15)
-#define M_INT_LDT_FATAL             _SB_MAKEMASK1(K_INT_LDT_FATAL)
-#define M_INT_LDT_NONFATAL          _SB_MAKEMASK1(K_INT_LDT_NONFATAL)
-#define M_INT_LDT_SMI               _SB_MAKEMASK1(K_INT_LDT_SMI)
-#define M_INT_LDT_NMI               _SB_MAKEMASK1(K_INT_LDT_NMI)
-#define M_INT_LDT_INIT              _SB_MAKEMASK1(K_INT_LDT_INIT)
-#define M_INT_LDT_STARTUP           _SB_MAKEMASK1(K_INT_LDT_STARTUP)
-#define M_INT_LDT_EXT               _SB_MAKEMASK1(K_INT_LDT_EXT)
-#define M_INT_PCI_ERROR             _SB_MAKEMASK1(K_INT_PCI_ERROR)
-#define M_INT_PCI_INTA              _SB_MAKEMASK1(K_INT_PCI_INTA)
-#define M_INT_PCI_INTB              _SB_MAKEMASK1(K_INT_PCI_INTB)
-#define M_INT_PCI_INTC              _SB_MAKEMASK1(K_INT_PCI_INTC)
-#define M_INT_PCI_INTD              _SB_MAKEMASK1(K_INT_PCI_INTD)
-#define M_INT_SPARE_2               _SB_MAKEMASK1(K_INT_SPARE_2)
+#define M_INT_GPIO_0		    _SB_MAKEMASK1(K_INT_GPIO_0)
+#define M_INT_GPIO_1		    _SB_MAKEMASK1(K_INT_GPIO_1)
+#define M_INT_GPIO_2		    _SB_MAKEMASK1(K_INT_GPIO_2)
+#define M_INT_GPIO_3		    _SB_MAKEMASK1(K_INT_GPIO_3)
+#define M_INT_GPIO_4		    _SB_MAKEMASK1(K_INT_GPIO_4)
+#define M_INT_GPIO_5		    _SB_MAKEMASK1(K_INT_GPIO_5)
+#define M_INT_GPIO_6		    _SB_MAKEMASK1(K_INT_GPIO_6)
+#define M_INT_GPIO_7		    _SB_MAKEMASK1(K_INT_GPIO_7)
+#define M_INT_GPIO_8		    _SB_MAKEMASK1(K_INT_GPIO_8)
+#define M_INT_GPIO_9		    _SB_MAKEMASK1(K_INT_GPIO_9)
+#define M_INT_GPIO_10		    _SB_MAKEMASK1(K_INT_GPIO_10)
+#define M_INT_GPIO_11		    _SB_MAKEMASK1(K_INT_GPIO_11)
+#define M_INT_GPIO_12		    _SB_MAKEMASK1(K_INT_GPIO_12)
+#define M_INT_GPIO_13		    _SB_MAKEMASK1(K_INT_GPIO_13)
+#define M_INT_GPIO_14		    _SB_MAKEMASK1(K_INT_GPIO_14)
+#define M_INT_GPIO_15		    _SB_MAKEMASK1(K_INT_GPIO_15)
+#define M_INT_LDT_FATAL		    _SB_MAKEMASK1(K_INT_LDT_FATAL)
+#define M_INT_LDT_NONFATAL	    _SB_MAKEMASK1(K_INT_LDT_NONFATAL)
+#define M_INT_LDT_SMI		    _SB_MAKEMASK1(K_INT_LDT_SMI)
+#define M_INT_LDT_NMI		    _SB_MAKEMASK1(K_INT_LDT_NMI)
+#define M_INT_LDT_INIT		    _SB_MAKEMASK1(K_INT_LDT_INIT)
+#define M_INT_LDT_STARTUP	    _SB_MAKEMASK1(K_INT_LDT_STARTUP)
+#define M_INT_LDT_EXT		    _SB_MAKEMASK1(K_INT_LDT_EXT)
+#define M_INT_PCI_ERROR		    _SB_MAKEMASK1(K_INT_PCI_ERROR)
+#define M_INT_PCI_INTA		    _SB_MAKEMASK1(K_INT_PCI_INTA)
+#define M_INT_PCI_INTB		    _SB_MAKEMASK1(K_INT_PCI_INTB)
+#define M_INT_PCI_INTC		    _SB_MAKEMASK1(K_INT_PCI_INTC)
+#define M_INT_PCI_INTD		    _SB_MAKEMASK1(K_INT_PCI_INTD)
+#define M_INT_SPARE_2		    _SB_MAKEMASK1(K_INT_SPARE_2)
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define M_INT_MAC_0_CH1		    _SB_MAKEMASK1(K_INT_MAC_0_CH1)
 #define M_INT_MAC_1_CH1		    _SB_MAKEMASK1(K_INT_MAC_1_CH1)
@@ -208,9 +208,9 @@
  */
 
 #define S_INT_LDT_INTMSG	      0
-#define M_INT_LDT_INTMSG              _SB_MAKEMASK(3, S_INT_LDT_INTMSG)
-#define V_INT_LDT_INTMSG(x)           _SB_MAKEVALUE(x, S_INT_LDT_INTMSG)
-#define G_INT_LDT_INTMSG(x)           _SB_GETVALUE(x, S_INT_LDT_INTMSG, M_INT_LDT_INTMSG)
+#define M_INT_LDT_INTMSG	      _SB_MAKEMASK(3, S_INT_LDT_INTMSG)
+#define V_INT_LDT_INTMSG(x)	      _SB_MAKEVALUE(x, S_INT_LDT_INTMSG)
+#define G_INT_LDT_INTMSG(x)	      _SB_GETVALUE(x, S_INT_LDT_INTMSG, M_INT_LDT_INTMSG)
 
 #define K_INT_LDT_INTMSG_FIXED	      0
 #define K_INT_LDT_INTMSG_ARBITRATED   1
@@ -221,28 +221,28 @@
 #define K_INT_LDT_INTMSG_EXTINT	      6
 #define K_INT_LDT_INTMSG_RESERVED     7
 
-#define M_INT_LDT_EDGETRIGGER         0
-#define M_INT_LDT_LEVELTRIGGER        _SB_MAKEMASK1(3)
+#define M_INT_LDT_EDGETRIGGER	      0
+#define M_INT_LDT_LEVELTRIGGER	      _SB_MAKEMASK1(3)
 
-#define M_INT_LDT_PHYSICALDEST        0
-#define M_INT_LDT_LOGICALDEST         _SB_MAKEMASK1(4)
+#define M_INT_LDT_PHYSICALDEST	      0
+#define M_INT_LDT_LOGICALDEST	      _SB_MAKEMASK1(4)
 
-#define S_INT_LDT_INTDEST             5
-#define M_INT_LDT_INTDEST             _SB_MAKEMASK(10, S_INT_LDT_INTDEST)
-#define V_INT_LDT_INTDEST(x)          _SB_MAKEVALUE(x, S_INT_LDT_INTDEST)
-#define G_INT_LDT_INTDEST(x)          _SB_GETVALUE(x, S_INT_LDT_INTDEST, M_INT_LDT_INTDEST)
+#define S_INT_LDT_INTDEST	      5
+#define M_INT_LDT_INTDEST	      _SB_MAKEMASK(10, S_INT_LDT_INTDEST)
+#define V_INT_LDT_INTDEST(x)	      _SB_MAKEVALUE(x, S_INT_LDT_INTDEST)
+#define G_INT_LDT_INTDEST(x)	      _SB_GETVALUE(x, S_INT_LDT_INTDEST, M_INT_LDT_INTDEST)
 
-#define S_INT_LDT_VECTOR              13
-#define M_INT_LDT_VECTOR              _SB_MAKEMASK(8, S_INT_LDT_VECTOR)
-#define V_INT_LDT_VECTOR(x)           _SB_MAKEVALUE(x, S_INT_LDT_VECTOR)
-#define G_INT_LDT_VECTOR(x)           _SB_GETVALUE(x, S_INT_LDT_VECTOR, M_INT_LDT_VECTOR)
+#define S_INT_LDT_VECTOR	      13
+#define M_INT_LDT_VECTOR	      _SB_MAKEMASK(8, S_INT_LDT_VECTOR)
+#define V_INT_LDT_VECTOR(x)	      _SB_MAKEVALUE(x, S_INT_LDT_VECTOR)
+#define G_INT_LDT_VECTOR(x)	      _SB_GETVALUE(x, S_INT_LDT_VECTOR, M_INT_LDT_VECTOR)
 
 /*
  * Vector format (Table 4-6)
  */
 
 #define M_LDTVECT_RAISEINT		0x00
-#define M_LDTVECT_RAISEMBOX             0x40
+#define M_LDTVECT_RAISEMBOX		0x40
 
 
 #endif	/* 1250/112x */
diff --git a/arch/mips/include/asm/sibyte/sb1250_l2c.h b/arch/mips/include/asm/sibyte/sb1250_l2c.h
index b61a749..30092d7 100644
--- a/arch/mips/include/asm/sibyte/sb1250_l2c.h
+++ b/arch/mips/include/asm/sibyte/sb1250_l2c.h
@@ -39,71 +39,71 @@
  * Level 2 Cache Tag register (Table 5-3)
  */
 
-#define S_L2C_TAG_MBZ               0
-#define M_L2C_TAG_MBZ               _SB_MAKEMASK(5, S_L2C_TAG_MBZ)
+#define S_L2C_TAG_MBZ		    0
+#define M_L2C_TAG_MBZ		    _SB_MAKEMASK(5, S_L2C_TAG_MBZ)
 
-#define S_L2C_TAG_INDEX             5
-#define M_L2C_TAG_INDEX             _SB_MAKEMASK(12, S_L2C_TAG_INDEX)
-#define V_L2C_TAG_INDEX(x)          _SB_MAKEVALUE(x, S_L2C_TAG_INDEX)
-#define G_L2C_TAG_INDEX(x)          _SB_GETVALUE(x, S_L2C_TAG_INDEX, M_L2C_TAG_INDEX)
+#define S_L2C_TAG_INDEX		    5
+#define M_L2C_TAG_INDEX		    _SB_MAKEMASK(12, S_L2C_TAG_INDEX)
+#define V_L2C_TAG_INDEX(x)	    _SB_MAKEVALUE(x, S_L2C_TAG_INDEX)
+#define G_L2C_TAG_INDEX(x)	    _SB_GETVALUE(x, S_L2C_TAG_INDEX, M_L2C_TAG_INDEX)
 
-#define S_L2C_TAG_TAG               17
-#define M_L2C_TAG_TAG               _SB_MAKEMASK(23, S_L2C_TAG_TAG)
-#define V_L2C_TAG_TAG(x)            _SB_MAKEVALUE(x, S_L2C_TAG_TAG)
-#define G_L2C_TAG_TAG(x)            _SB_GETVALUE(x, S_L2C_TAG_TAG, M_L2C_TAG_TAG)
+#define S_L2C_TAG_TAG		    17
+#define M_L2C_TAG_TAG		    _SB_MAKEMASK(23, S_L2C_TAG_TAG)
+#define V_L2C_TAG_TAG(x)	    _SB_MAKEVALUE(x, S_L2C_TAG_TAG)
+#define G_L2C_TAG_TAG(x)	    _SB_GETVALUE(x, S_L2C_TAG_TAG, M_L2C_TAG_TAG)
 
-#define S_L2C_TAG_ECC               40
-#define M_L2C_TAG_ECC               _SB_MAKEMASK(6, S_L2C_TAG_ECC)
-#define V_L2C_TAG_ECC(x)            _SB_MAKEVALUE(x, S_L2C_TAG_ECC)
-#define G_L2C_TAG_ECC(x)            _SB_GETVALUE(x, S_L2C_TAG_ECC, M_L2C_TAG_ECC)
+#define S_L2C_TAG_ECC		    40
+#define M_L2C_TAG_ECC		    _SB_MAKEMASK(6, S_L2C_TAG_ECC)
+#define V_L2C_TAG_ECC(x)	    _SB_MAKEVALUE(x, S_L2C_TAG_ECC)
+#define G_L2C_TAG_ECC(x)	    _SB_GETVALUE(x, S_L2C_TAG_ECC, M_L2C_TAG_ECC)
 
-#define S_L2C_TAG_WAY               46
-#define M_L2C_TAG_WAY               _SB_MAKEMASK(2, S_L2C_TAG_WAY)
-#define V_L2C_TAG_WAY(x)            _SB_MAKEVALUE(x, S_L2C_TAG_WAY)
-#define G_L2C_TAG_WAY(x)            _SB_GETVALUE(x, S_L2C_TAG_WAY, M_L2C_TAG_WAY)
+#define S_L2C_TAG_WAY		    46
+#define M_L2C_TAG_WAY		    _SB_MAKEMASK(2, S_L2C_TAG_WAY)
+#define V_L2C_TAG_WAY(x)	    _SB_MAKEVALUE(x, S_L2C_TAG_WAY)
+#define G_L2C_TAG_WAY(x)	    _SB_GETVALUE(x, S_L2C_TAG_WAY, M_L2C_TAG_WAY)
 
-#define M_L2C_TAG_DIRTY             _SB_MAKEMASK1(48)
-#define M_L2C_TAG_VALID             _SB_MAKEMASK1(49)
+#define M_L2C_TAG_DIRTY		    _SB_MAKEMASK1(48)
+#define M_L2C_TAG_VALID		    _SB_MAKEMASK1(49)
 
 /*
  * Format of level 2 cache management address (table 5-2)
  */
 
-#define S_L2C_MGMT_INDEX            5
-#define M_L2C_MGMT_INDEX            _SB_MAKEMASK(12, S_L2C_MGMT_INDEX)
-#define V_L2C_MGMT_INDEX(x)         _SB_MAKEVALUE(x, S_L2C_MGMT_INDEX)
-#define G_L2C_MGMT_INDEX(x)         _SB_GETVALUE(x, S_L2C_MGMT_INDEX, M_L2C_MGMT_INDEX)
+#define S_L2C_MGMT_INDEX	    5
+#define M_L2C_MGMT_INDEX	    _SB_MAKEMASK(12, S_L2C_MGMT_INDEX)
+#define V_L2C_MGMT_INDEX(x)	    _SB_MAKEVALUE(x, S_L2C_MGMT_INDEX)
+#define G_L2C_MGMT_INDEX(x)	    _SB_GETVALUE(x, S_L2C_MGMT_INDEX, M_L2C_MGMT_INDEX)
 
-#define S_L2C_MGMT_QUADRANT         15
-#define M_L2C_MGMT_QUADRANT         _SB_MAKEMASK(2, S_L2C_MGMT_QUADRANT)
-#define V_L2C_MGMT_QUADRANT(x)      _SB_MAKEVALUE(x, S_L2C_MGMT_QUADRANT)
-#define G_L2C_MGMT_QUADRANT(x)      _SB_GETVALUE(x, S_L2C_MGMT_QUADRANT, M_L2C_MGMT_QUADRANT)
+#define S_L2C_MGMT_QUADRANT	    15
+#define M_L2C_MGMT_QUADRANT	    _SB_MAKEMASK(2, S_L2C_MGMT_QUADRANT)
+#define V_L2C_MGMT_QUADRANT(x)	    _SB_MAKEVALUE(x, S_L2C_MGMT_QUADRANT)
+#define G_L2C_MGMT_QUADRANT(x)	    _SB_GETVALUE(x, S_L2C_MGMT_QUADRANT, M_L2C_MGMT_QUADRANT)
 
 #define S_L2C_MGMT_HALF		    16
-#define M_L2C_MGMT_HALF	            _SB_MAKEMASK(1, S_L2C_MGMT_HALF)
+#define M_L2C_MGMT_HALF		    _SB_MAKEMASK(1, S_L2C_MGMT_HALF)
 
-#define S_L2C_MGMT_WAY              17
-#define M_L2C_MGMT_WAY              _SB_MAKEMASK(2, S_L2C_MGMT_WAY)
-#define V_L2C_MGMT_WAY(x)           _SB_MAKEVALUE(x, S_L2C_MGMT_WAY)
-#define G_L2C_MGMT_WAY(x)           _SB_GETVALUE(x, S_L2C_MGMT_WAY, M_L2C_MGMT_WAY)
+#define S_L2C_MGMT_WAY		    17
+#define M_L2C_MGMT_WAY		    _SB_MAKEMASK(2, S_L2C_MGMT_WAY)
+#define V_L2C_MGMT_WAY(x)	    _SB_MAKEVALUE(x, S_L2C_MGMT_WAY)
+#define G_L2C_MGMT_WAY(x)	    _SB_GETVALUE(x, S_L2C_MGMT_WAY, M_L2C_MGMT_WAY)
 
-#define S_L2C_MGMT_ECC_DIAG         21
-#define M_L2C_MGMT_ECC_DIAG         _SB_MAKEMASK(2, S_L2C_MGMT_ECC_DIAG)
-#define V_L2C_MGMT_ECC_DIAG(x)      _SB_MAKEVALUE(x, S_L2C_MGMT_ECC_DIAG)
-#define G_L2C_MGMT_ECC_DIAG(x)      _SB_GETVALUE(x, S_L2C_MGMT_ECC_DIAG, M_L2C_MGMT_ECC_DIAG)
+#define S_L2C_MGMT_ECC_DIAG	    21
+#define M_L2C_MGMT_ECC_DIAG	    _SB_MAKEMASK(2, S_L2C_MGMT_ECC_DIAG)
+#define V_L2C_MGMT_ECC_DIAG(x)	    _SB_MAKEVALUE(x, S_L2C_MGMT_ECC_DIAG)
+#define G_L2C_MGMT_ECC_DIAG(x)	    _SB_GETVALUE(x, S_L2C_MGMT_ECC_DIAG, M_L2C_MGMT_ECC_DIAG)
 
-#define S_L2C_MGMT_TAG              23
-#define M_L2C_MGMT_TAG              _SB_MAKEMASK(4, S_L2C_MGMT_TAG)
-#define V_L2C_MGMT_TAG(x)           _SB_MAKEVALUE(x, S_L2C_MGMT_TAG)
-#define G_L2C_MGMT_TAG(x)           _SB_GETVALUE(x, S_L2C_MGMT_TAG, M_L2C_MGMT_TAG)
+#define S_L2C_MGMT_TAG		    23
+#define M_L2C_MGMT_TAG		    _SB_MAKEMASK(4, S_L2C_MGMT_TAG)
+#define V_L2C_MGMT_TAG(x)	    _SB_MAKEVALUE(x, S_L2C_MGMT_TAG)
+#define G_L2C_MGMT_TAG(x)	    _SB_GETVALUE(x, S_L2C_MGMT_TAG, M_L2C_MGMT_TAG)
 
-#define M_L2C_MGMT_DIRTY            _SB_MAKEMASK1(19)
-#define M_L2C_MGMT_VALID            _SB_MAKEMASK1(20)
+#define M_L2C_MGMT_DIRTY	    _SB_MAKEMASK1(19)
+#define M_L2C_MGMT_VALID	    _SB_MAKEMASK1(20)
 
-#define A_L2C_MGMT_TAG_BASE         0x00D0000000
+#define A_L2C_MGMT_TAG_BASE	    0x00D0000000
 
-#define L2C_ENTRIES_PER_WAY       4096
-#define L2C_NUM_WAYS              4
+#define L2C_ENTRIES_PER_WAY	  4096
+#define L2C_NUM_WAYS		  4
 
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
diff --git a/arch/mips/include/asm/sibyte/sb1250_ldt.h b/arch/mips/include/asm/sibyte/sb1250_ldt.h
index bf7f320..2340c29 100644
--- a/arch/mips/include/asm/sibyte/sb1250_ldt.h
+++ b/arch/mips/include/asm/sibyte/sb1250_ldt.h
@@ -66,7 +66,7 @@
 #define R_LDT_TYPE1_SRICMD	0x0050
 #define R_LDT_TYPE1_SRITXNUM	0x0054
 #define R_LDT_TYPE1_SRIRXNUM	0x0058
-#define R_LDT_TYPE1_ERRSTATUS   0x0068
+#define R_LDT_TYPE1_ERRSTATUS	0x0068
 #define R_LDT_TYPE1_SRICTRL	0x006C
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define R_LDT_TYPE1_ADDSTATUS	0x0070
@@ -258,7 +258,7 @@
 #define M_LDT_LINKCTRL_DWFCOUT_EN	_SB_MAKEMASK1_32(31)
 
 /*
- * LDT Link frequency register  (Table 8-20) offset 0x48
+ * LDT Link frequency register	(Table 8-20) offset 0x48
  */
 
 #define S_LDT_LINKFREQ_FREQ		8
@@ -301,8 +301,8 @@
 
 #define S_LDT_SRICMD_TXINITIALOFFSET	28
 #define M_LDT_SRICMD_TXINITIALOFFSET	_SB_MAKEMASK_32(3, S_LDT_SRICMD_TXINITIALOFFSET)
-#define V_LDT_SRICMD_TXINITIALOFFSET(x)	_SB_MAKEVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET)
-#define G_LDT_SRICMD_TXINITIALOFFSET(x)	_SB_GETVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET, M_LDT_SRICMD_TXINITIALOFFSET)
+#define V_LDT_SRICMD_TXINITIALOFFSET(x) _SB_MAKEVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET)
+#define G_LDT_SRICMD_TXINITIALOFFSET(x) _SB_GETVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET, M_LDT_SRICMD_TXINITIALOFFSET)
 
 #define M_LDT_SRICMD_LINKFREQDIRECT	_SB_MAKEMASK1_32(31)
 
@@ -318,16 +318,16 @@
 #define M_LDT_ERRCTL_OVFSYNCFLOOD_EN	_SB_MAKEMASK1_32(5)
 #define M_LDT_ERRCTL_EOCNXAFATAL_EN	_SB_MAKEMASK1_32(6)
 #define M_LDT_ERRCTL_EOCNXANONFATAL_EN	_SB_MAKEMASK1_32(7)
-#define M_LDT_ERRCTL_EOCNXASYNCFLOOD_EN	_SB_MAKEMASK1_32(8)
+#define M_LDT_ERRCTL_EOCNXASYNCFLOOD_EN _SB_MAKEMASK1_32(8)
 #define M_LDT_ERRCTL_CRCFATAL_EN	_SB_MAKEMASK1_32(9)
 #define M_LDT_ERRCTL_CRCNONFATAL_EN	_SB_MAKEMASK1_32(10)
 #define M_LDT_ERRCTL_SERRFATAL_EN	_SB_MAKEMASK1_32(11)
 #define M_LDT_ERRCTL_SRCTAGFATAL_EN	_SB_MAKEMASK1_32(12)
 #define M_LDT_ERRCTL_SRCTAGNONFATAL_EN	_SB_MAKEMASK1_32(13)
-#define M_LDT_ERRCTL_SRCTAGSYNCFLOOD_EN	_SB_MAKEMASK1_32(14)
+#define M_LDT_ERRCTL_SRCTAGSYNCFLOOD_EN _SB_MAKEMASK1_32(14)
 #define M_LDT_ERRCTL_MAPNXAFATAL_EN	_SB_MAKEMASK1_32(15)
 #define M_LDT_ERRCTL_MAPNXANONFATAL_EN	_SB_MAKEMASK1_32(16)
-#define M_LDT_ERRCTL_MAPNXASYNCFLOOD_EN	_SB_MAKEMASK1_32(17)
+#define M_LDT_ERRCTL_MAPNXASYNCFLOOD_EN _SB_MAKEMASK1_32(17)
 
 #define M_LDT_ERRCTL_PROTOERR		_SB_MAKEMASK1_32(24)
 #define M_LDT_ERRCTL_OVFERR		_SB_MAKEMASK1_32(25)
diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h
index cfc4d78..3fa94fc7 100644
--- a/arch/mips/include/asm/sibyte/sb1250_mac.h
+++ b/arch/mips/include/asm/sibyte/sb1250_mac.h
@@ -47,86 +47,86 @@
  */
 
 
-#define M_MAC_RESERVED0             _SB_MAKEMASK1(0)
-#define M_MAC_TX_HOLD_SOP_EN        _SB_MAKEMASK1(1)
-#define M_MAC_RETRY_EN              _SB_MAKEMASK1(2)
-#define M_MAC_RET_DRPREQ_EN         _SB_MAKEMASK1(3)
-#define M_MAC_RET_UFL_EN            _SB_MAKEMASK1(4)
-#define M_MAC_BURST_EN              _SB_MAKEMASK1(5)
+#define M_MAC_RESERVED0		    _SB_MAKEMASK1(0)
+#define M_MAC_TX_HOLD_SOP_EN	    _SB_MAKEMASK1(1)
+#define M_MAC_RETRY_EN		    _SB_MAKEMASK1(2)
+#define M_MAC_RET_DRPREQ_EN	    _SB_MAKEMASK1(3)
+#define M_MAC_RET_UFL_EN	    _SB_MAKEMASK1(4)
+#define M_MAC_BURST_EN		    _SB_MAKEMASK1(5)
 
-#define S_MAC_TX_PAUSE              _SB_MAKE64(6)
-#define M_MAC_TX_PAUSE_CNT          _SB_MAKEMASK(3, S_MAC_TX_PAUSE)
-#define V_MAC_TX_PAUSE_CNT(x)       _SB_MAKEVALUE(x, S_MAC_TX_PAUSE)
+#define S_MAC_TX_PAUSE		    _SB_MAKE64(6)
+#define M_MAC_TX_PAUSE_CNT	    _SB_MAKEMASK(3, S_MAC_TX_PAUSE)
+#define V_MAC_TX_PAUSE_CNT(x)	    _SB_MAKEVALUE(x, S_MAC_TX_PAUSE)
 
-#define K_MAC_TX_PAUSE_CNT_512      0
-#define K_MAC_TX_PAUSE_CNT_1K       1
-#define K_MAC_TX_PAUSE_CNT_2K       2
-#define K_MAC_TX_PAUSE_CNT_4K       3
-#define K_MAC_TX_PAUSE_CNT_8K       4
-#define K_MAC_TX_PAUSE_CNT_16K      5
-#define K_MAC_TX_PAUSE_CNT_32K      6
-#define K_MAC_TX_PAUSE_CNT_64K      7
+#define K_MAC_TX_PAUSE_CNT_512	    0
+#define K_MAC_TX_PAUSE_CNT_1K	    1
+#define K_MAC_TX_PAUSE_CNT_2K	    2
+#define K_MAC_TX_PAUSE_CNT_4K	    3
+#define K_MAC_TX_PAUSE_CNT_8K	    4
+#define K_MAC_TX_PAUSE_CNT_16K	    5
+#define K_MAC_TX_PAUSE_CNT_32K	    6
+#define K_MAC_TX_PAUSE_CNT_64K	    7
 
-#define V_MAC_TX_PAUSE_CNT_512      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_512)
-#define V_MAC_TX_PAUSE_CNT_1K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_1K)
-#define V_MAC_TX_PAUSE_CNT_2K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_2K)
-#define V_MAC_TX_PAUSE_CNT_4K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_4K)
-#define V_MAC_TX_PAUSE_CNT_8K       V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_8K)
-#define V_MAC_TX_PAUSE_CNT_16K      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_16K)
-#define V_MAC_TX_PAUSE_CNT_32K      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_32K)
-#define V_MAC_TX_PAUSE_CNT_64K      V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_64K)
+#define V_MAC_TX_PAUSE_CNT_512	    V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_512)
+#define V_MAC_TX_PAUSE_CNT_1K	    V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_1K)
+#define V_MAC_TX_PAUSE_CNT_2K	    V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_2K)
+#define V_MAC_TX_PAUSE_CNT_4K	    V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_4K)
+#define V_MAC_TX_PAUSE_CNT_8K	    V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_8K)
+#define V_MAC_TX_PAUSE_CNT_16K	    V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_16K)
+#define V_MAC_TX_PAUSE_CNT_32K	    V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_32K)
+#define V_MAC_TX_PAUSE_CNT_64K	    V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_64K)
 
-#define M_MAC_RESERVED1             _SB_MAKEMASK(8, 9)
+#define M_MAC_RESERVED1		    _SB_MAKEMASK(8, 9)
 
-#define M_MAC_AP_STAT_EN            _SB_MAKEMASK1(17)
+#define M_MAC_AP_STAT_EN	    _SB_MAKEMASK1(17)
 
 #if SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_TIMESTAMP		    _SB_MAKEMASK1(18)
 #endif
-#define M_MAC_DRP_ERRPKT_EN         _SB_MAKEMASK1(19)
-#define M_MAC_DRP_FCSERRPKT_EN      _SB_MAKEMASK1(20)
-#define M_MAC_DRP_CODEERRPKT_EN     _SB_MAKEMASK1(21)
-#define M_MAC_DRP_DRBLERRPKT_EN     _SB_MAKEMASK1(22)
-#define M_MAC_DRP_RNTPKT_EN         _SB_MAKEMASK1(23)
-#define M_MAC_DRP_OSZPKT_EN         _SB_MAKEMASK1(24)
-#define M_MAC_DRP_LENERRPKT_EN      _SB_MAKEMASK1(25)
+#define M_MAC_DRP_ERRPKT_EN	    _SB_MAKEMASK1(19)
+#define M_MAC_DRP_FCSERRPKT_EN	    _SB_MAKEMASK1(20)
+#define M_MAC_DRP_CODEERRPKT_EN	    _SB_MAKEMASK1(21)
+#define M_MAC_DRP_DRBLERRPKT_EN	    _SB_MAKEMASK1(22)
+#define M_MAC_DRP_RNTPKT_EN	    _SB_MAKEMASK1(23)
+#define M_MAC_DRP_OSZPKT_EN	    _SB_MAKEMASK1(24)
+#define M_MAC_DRP_LENERRPKT_EN	    _SB_MAKEMASK1(25)
 
-#define M_MAC_RESERVED3             _SB_MAKEMASK(6, 26)
+#define M_MAC_RESERVED3		    _SB_MAKEMASK(6, 26)
 
-#define M_MAC_BYPASS_SEL            _SB_MAKEMASK1(32)
-#define M_MAC_HDX_EN                _SB_MAKEMASK1(33)
+#define M_MAC_BYPASS_SEL	    _SB_MAKEMASK1(32)
+#define M_MAC_HDX_EN		    _SB_MAKEMASK1(33)
 
-#define S_MAC_SPEED_SEL             _SB_MAKE64(34)
-#define M_MAC_SPEED_SEL             _SB_MAKEMASK(2, S_MAC_SPEED_SEL)
+#define S_MAC_SPEED_SEL		    _SB_MAKE64(34)
+#define M_MAC_SPEED_SEL		    _SB_MAKEMASK(2, S_MAC_SPEED_SEL)
 #define V_MAC_SPEED_SEL(x)	    _SB_MAKEVALUE(x, S_MAC_SPEED_SEL)
 #define G_MAC_SPEED_SEL(x)	    _SB_GETVALUE(x, S_MAC_SPEED_SEL, M_MAC_SPEED_SEL)
 
-#define K_MAC_SPEED_SEL_10MBPS      0
-#define K_MAC_SPEED_SEL_100MBPS     1
+#define K_MAC_SPEED_SEL_10MBPS	    0
+#define K_MAC_SPEED_SEL_100MBPS	    1
 #define K_MAC_SPEED_SEL_1000MBPS    2
 #define K_MAC_SPEED_SEL_RESERVED    3
 
-#define V_MAC_SPEED_SEL_10MBPS      V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_10MBPS)
-#define V_MAC_SPEED_SEL_100MBPS     V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_100MBPS)
+#define V_MAC_SPEED_SEL_10MBPS	    V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_10MBPS)
+#define V_MAC_SPEED_SEL_100MBPS	    V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_100MBPS)
 #define V_MAC_SPEED_SEL_1000MBPS    V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_1000MBPS)
 #define V_MAC_SPEED_SEL_RESERVED    V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_RESERVED)
 
-#define M_MAC_TX_CLK_EDGE_SEL       _SB_MAKEMASK1(36)
-#define M_MAC_LOOPBACK_SEL          _SB_MAKEMASK1(37)
-#define M_MAC_FAST_SYNC             _SB_MAKEMASK1(38)
-#define M_MAC_SS_EN                 _SB_MAKEMASK1(39)
+#define M_MAC_TX_CLK_EDGE_SEL	    _SB_MAKEMASK1(36)
+#define M_MAC_LOOPBACK_SEL	    _SB_MAKEMASK1(37)
+#define M_MAC_FAST_SYNC		    _SB_MAKEMASK1(38)
+#define M_MAC_SS_EN		    _SB_MAKEMASK1(39)
 
 #define S_MAC_BYPASS_CFG	    _SB_MAKE64(40)
-#define M_MAC_BYPASS_CFG            _SB_MAKEMASK(2, S_MAC_BYPASS_CFG)
-#define V_MAC_BYPASS_CFG(x)         _SB_MAKEVALUE(x, S_MAC_BYPASS_CFG)
-#define G_MAC_BYPASS_CFG(x)         _SB_GETVALUE(x, S_MAC_BYPASS_CFG, M_MAC_BYPASS_CFG)
+#define M_MAC_BYPASS_CFG	    _SB_MAKEMASK(2, S_MAC_BYPASS_CFG)
+#define V_MAC_BYPASS_CFG(x)	    _SB_MAKEVALUE(x, S_MAC_BYPASS_CFG)
+#define G_MAC_BYPASS_CFG(x)	    _SB_GETVALUE(x, S_MAC_BYPASS_CFG, M_MAC_BYPASS_CFG)
 
 #define K_MAC_BYPASS_GMII	    0
-#define K_MAC_BYPASS_ENCODED        1
-#define K_MAC_BYPASS_SOP            2
-#define K_MAC_BYPASS_EOP            3
+#define K_MAC_BYPASS_ENCODED	    1
+#define K_MAC_BYPASS_SOP	    2
+#define K_MAC_BYPASS_EOP	    3
 
-#define M_MAC_BYPASS_16             _SB_MAKEMASK1(42)
+#define M_MAC_BYPASS_16		    _SB_MAKEMASK1(42)
 #define M_MAC_BYPASS_FCS_CHK	    _SB_MAKEMASK1(43)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
@@ -137,30 +137,30 @@
 #define M_MAC_SPLIT_CH_SEL	    _SB_MAKEMASK1(45)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
-#define S_MAC_BYPASS_IFG            _SB_MAKE64(46)
-#define M_MAC_BYPASS_IFG            _SB_MAKEMASK(8, S_MAC_BYPASS_IFG)
+#define S_MAC_BYPASS_IFG	    _SB_MAKE64(46)
+#define M_MAC_BYPASS_IFG	    _SB_MAKEMASK(8, S_MAC_BYPASS_IFG)
 #define V_MAC_BYPASS_IFG(x)	    _SB_MAKEVALUE(x, S_MAC_BYPASS_IFG)
 #define G_MAC_BYPASS_IFG(x)	    _SB_GETVALUE(x, S_MAC_BYPASS_IFG, M_MAC_BYPASS_IFG)
 
-#define K_MAC_FC_CMD_DISABLED       0
-#define K_MAC_FC_CMD_ENABLED        1
+#define K_MAC_FC_CMD_DISABLED	    0
+#define K_MAC_FC_CMD_ENABLED	    1
 #define K_MAC_FC_CMD_ENAB_FALSECARR 2
 
-#define V_MAC_FC_CMD_DISABLED       V_MAC_FC_CMD(K_MAC_FC_CMD_DISABLED)
-#define V_MAC_FC_CMD_ENABLED        V_MAC_FC_CMD(K_MAC_FC_CMD_ENABLED)
+#define V_MAC_FC_CMD_DISABLED	    V_MAC_FC_CMD(K_MAC_FC_CMD_DISABLED)
+#define V_MAC_FC_CMD_ENABLED	    V_MAC_FC_CMD(K_MAC_FC_CMD_ENABLED)
 #define V_MAC_FC_CMD_ENAB_FALSECARR V_MAC_FC_CMD(K_MAC_FC_CMD_ENAB_FALSECARR)
 
-#define M_MAC_FC_SEL                _SB_MAKEMASK1(54)
+#define M_MAC_FC_SEL		    _SB_MAKEMASK1(54)
 
-#define S_MAC_FC_CMD                _SB_MAKE64(55)
-#define M_MAC_FC_CMD                _SB_MAKEMASK(2, S_MAC_FC_CMD)
-#define V_MAC_FC_CMD(x)	            _SB_MAKEVALUE(x, S_MAC_FC_CMD)
-#define G_MAC_FC_CMD(x)	            _SB_GETVALUE(x, S_MAC_FC_CMD, M_MAC_FC_CMD)
+#define S_MAC_FC_CMD		    _SB_MAKE64(55)
+#define M_MAC_FC_CMD		    _SB_MAKEMASK(2, S_MAC_FC_CMD)
+#define V_MAC_FC_CMD(x)		    _SB_MAKEVALUE(x, S_MAC_FC_CMD)
+#define G_MAC_FC_CMD(x)		    _SB_GETVALUE(x, S_MAC_FC_CMD, M_MAC_FC_CMD)
 
-#define S_MAC_RX_CH_SEL             _SB_MAKE64(57)
-#define M_MAC_RX_CH_SEL             _SB_MAKEMASK(7, S_MAC_RX_CH_SEL)
-#define V_MAC_RX_CH_SEL(x)          _SB_MAKEVALUE(x, S_MAC_RX_CH_SEL)
-#define G_MAC_RX_CH_SEL(x)          _SB_GETVALUE(x, S_MAC_RX_CH_SEL, M_MAC_RX_CH_SEL)
+#define S_MAC_RX_CH_SEL		    _SB_MAKE64(57)
+#define M_MAC_RX_CH_SEL		    _SB_MAKEMASK(7, S_MAC_RX_CH_SEL)
+#define V_MAC_RX_CH_SEL(x)	    _SB_MAKEVALUE(x, S_MAC_RX_CH_SEL)
+#define G_MAC_RX_CH_SEL(x)	    _SB_GETVALUE(x, S_MAC_RX_CH_SEL, M_MAC_RX_CH_SEL)
 
 
 /*
@@ -170,18 +170,18 @@
  * Register: MAC_ENABLE_2
  */
 
-#define M_MAC_RXDMA_EN0	            _SB_MAKEMASK1(0)
-#define M_MAC_RXDMA_EN1	            _SB_MAKEMASK1(1)
-#define M_MAC_TXDMA_EN0	            _SB_MAKEMASK1(4)
-#define M_MAC_TXDMA_EN1	            _SB_MAKEMASK1(5)
+#define M_MAC_RXDMA_EN0		    _SB_MAKEMASK1(0)
+#define M_MAC_RXDMA_EN1		    _SB_MAKEMASK1(1)
+#define M_MAC_TXDMA_EN0		    _SB_MAKEMASK1(4)
+#define M_MAC_TXDMA_EN1		    _SB_MAKEMASK1(5)
 
-#define M_MAC_PORT_RESET            _SB_MAKEMASK1(8)
+#define M_MAC_PORT_RESET	    _SB_MAKEMASK1(8)
 
 #if (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x))
-#define M_MAC_RX_ENABLE             _SB_MAKEMASK1(10)
-#define M_MAC_TX_ENABLE             _SB_MAKEMASK1(11)
-#define M_MAC_BYP_RX_ENABLE         _SB_MAKEMASK1(12)
-#define M_MAC_BYP_TX_ENABLE         _SB_MAKEMASK1(13)
+#define M_MAC_RX_ENABLE		    _SB_MAKEMASK1(10)
+#define M_MAC_TX_ENABLE		    _SB_MAKEMASK1(11)
+#define M_MAC_BYP_RX_ENABLE	    _SB_MAKEMASK1(12)
+#define M_MAC_BYP_TX_ENABLE	    _SB_MAKEMASK1(13)
 #endif
 
 /*
@@ -203,13 +203,13 @@
 
 #define S_MAC_TXD_WEIGHT0	    _SB_MAKE64(0)
 #define M_MAC_TXD_WEIGHT0	    _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT0)
-#define V_MAC_TXD_WEIGHT0(x)        _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT0)
-#define G_MAC_TXD_WEIGHT0(x)        _SB_GETVALUE(x, S_MAC_TXD_WEIGHT0, M_MAC_TXD_WEIGHT0)
+#define V_MAC_TXD_WEIGHT0(x)	    _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT0)
+#define G_MAC_TXD_WEIGHT0(x)	    _SB_GETVALUE(x, S_MAC_TXD_WEIGHT0, M_MAC_TXD_WEIGHT0)
 
 #define S_MAC_TXD_WEIGHT1	    _SB_MAKE64(4)
 #define M_MAC_TXD_WEIGHT1	    _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT1)
-#define V_MAC_TXD_WEIGHT1(x)        _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT1)
-#define G_MAC_TXD_WEIGHT1(x)        _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1)
+#define V_MAC_TXD_WEIGHT1(x)	    _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT1)
+#define G_MAC_TXD_WEIGHT1(x)	    _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1)
 
 /*
  * MAC Fifo Threshold registers (Table 9-14)
@@ -218,53 +218,53 @@
  * Register: MAC_THRSH_CFG_2
  */
 
-#define S_MAC_TX_WR_THRSH           _SB_MAKE64(0)
+#define S_MAC_TX_WR_THRSH	    _SB_MAKE64(0)
 #if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
-/* XXX: Can't enable, as it has the same name as a pass2+ define below.  */
-/* #define M_MAC_TX_WR_THRSH           _SB_MAKEMASK(6, S_MAC_TX_WR_THRSH) */
+/* XXX: Can't enable, as it has the same name as a pass2+ define below.	 */
+/* #define M_MAC_TX_WR_THRSH	       _SB_MAKEMASK(6, S_MAC_TX_WR_THRSH) */
 #endif /* up to 1250 PASS1 */
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define M_MAC_TX_WR_THRSH           _SB_MAKEMASK(7, S_MAC_TX_WR_THRSH)
+#define M_MAC_TX_WR_THRSH	    _SB_MAKEMASK(7, S_MAC_TX_WR_THRSH)
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
-#define V_MAC_TX_WR_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_TX_WR_THRSH)
-#define G_MAC_TX_WR_THRSH(x)        _SB_GETVALUE(x, S_MAC_TX_WR_THRSH, M_MAC_TX_WR_THRSH)
+#define V_MAC_TX_WR_THRSH(x)	    _SB_MAKEVALUE(x, S_MAC_TX_WR_THRSH)
+#define G_MAC_TX_WR_THRSH(x)	    _SB_GETVALUE(x, S_MAC_TX_WR_THRSH, M_MAC_TX_WR_THRSH)
 
-#define S_MAC_TX_RD_THRSH           _SB_MAKE64(8)
+#define S_MAC_TX_RD_THRSH	    _SB_MAKE64(8)
 #if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
-/* XXX: Can't enable, as it has the same name as a pass2+ define below.  */
-/* #define M_MAC_TX_RD_THRSH           _SB_MAKEMASK(6, S_MAC_TX_RD_THRSH) */
+/* XXX: Can't enable, as it has the same name as a pass2+ define below.	 */
+/* #define M_MAC_TX_RD_THRSH	       _SB_MAKEMASK(6, S_MAC_TX_RD_THRSH) */
 #endif /* up to 1250 PASS1 */
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define M_MAC_TX_RD_THRSH           _SB_MAKEMASK(7, S_MAC_TX_RD_THRSH)
+#define M_MAC_TX_RD_THRSH	    _SB_MAKEMASK(7, S_MAC_TX_RD_THRSH)
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
-#define V_MAC_TX_RD_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_TX_RD_THRSH)
-#define G_MAC_TX_RD_THRSH(x)        _SB_GETVALUE(x, S_MAC_TX_RD_THRSH, M_MAC_TX_RD_THRSH)
+#define V_MAC_TX_RD_THRSH(x)	    _SB_MAKEVALUE(x, S_MAC_TX_RD_THRSH)
+#define G_MAC_TX_RD_THRSH(x)	    _SB_GETVALUE(x, S_MAC_TX_RD_THRSH, M_MAC_TX_RD_THRSH)
 
-#define S_MAC_TX_RL_THRSH           _SB_MAKE64(16)
-#define M_MAC_TX_RL_THRSH           _SB_MAKEMASK(4, S_MAC_TX_RL_THRSH)
-#define V_MAC_TX_RL_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_TX_RL_THRSH)
-#define G_MAC_TX_RL_THRSH(x)        _SB_GETVALUE(x, S_MAC_TX_RL_THRSH, M_MAC_TX_RL_THRSH)
+#define S_MAC_TX_RL_THRSH	    _SB_MAKE64(16)
+#define M_MAC_TX_RL_THRSH	    _SB_MAKEMASK(4, S_MAC_TX_RL_THRSH)
+#define V_MAC_TX_RL_THRSH(x)	    _SB_MAKEVALUE(x, S_MAC_TX_RL_THRSH)
+#define G_MAC_TX_RL_THRSH(x)	    _SB_GETVALUE(x, S_MAC_TX_RL_THRSH, M_MAC_TX_RL_THRSH)
 
-#define S_MAC_RX_PL_THRSH           _SB_MAKE64(24)
-#define M_MAC_RX_PL_THRSH           _SB_MAKEMASK(6, S_MAC_RX_PL_THRSH)
-#define V_MAC_RX_PL_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_RX_PL_THRSH)
-#define G_MAC_RX_PL_THRSH(x)        _SB_GETVALUE(x, S_MAC_RX_PL_THRSH, M_MAC_RX_PL_THRSH)
+#define S_MAC_RX_PL_THRSH	    _SB_MAKE64(24)
+#define M_MAC_RX_PL_THRSH	    _SB_MAKEMASK(6, S_MAC_RX_PL_THRSH)
+#define V_MAC_RX_PL_THRSH(x)	    _SB_MAKEVALUE(x, S_MAC_RX_PL_THRSH)
+#define G_MAC_RX_PL_THRSH(x)	    _SB_GETVALUE(x, S_MAC_RX_PL_THRSH, M_MAC_RX_PL_THRSH)
 
-#define S_MAC_RX_RD_THRSH           _SB_MAKE64(32)
-#define M_MAC_RX_RD_THRSH           _SB_MAKEMASK(6, S_MAC_RX_RD_THRSH)
-#define V_MAC_RX_RD_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_RX_RD_THRSH)
-#define G_MAC_RX_RD_THRSH(x)        _SB_GETVALUE(x, S_MAC_RX_RD_THRSH, M_MAC_RX_RD_THRSH)
+#define S_MAC_RX_RD_THRSH	    _SB_MAKE64(32)
+#define M_MAC_RX_RD_THRSH	    _SB_MAKEMASK(6, S_MAC_RX_RD_THRSH)
+#define V_MAC_RX_RD_THRSH(x)	    _SB_MAKEVALUE(x, S_MAC_RX_RD_THRSH)
+#define G_MAC_RX_RD_THRSH(x)	    _SB_GETVALUE(x, S_MAC_RX_RD_THRSH, M_MAC_RX_RD_THRSH)
 
-#define S_MAC_RX_RL_THRSH           _SB_MAKE64(40)
-#define M_MAC_RX_RL_THRSH           _SB_MAKEMASK(6, S_MAC_RX_RL_THRSH)
-#define V_MAC_RX_RL_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_RX_RL_THRSH)
-#define G_MAC_RX_RL_THRSH(x)        _SB_GETVALUE(x, S_MAC_RX_RL_THRSH, M_MAC_RX_RL_THRSH)
+#define S_MAC_RX_RL_THRSH	    _SB_MAKE64(40)
+#define M_MAC_RX_RL_THRSH	    _SB_MAKEMASK(6, S_MAC_RX_RL_THRSH)
+#define V_MAC_RX_RL_THRSH(x)	    _SB_MAKEVALUE(x, S_MAC_RX_RL_THRSH)
+#define G_MAC_RX_RL_THRSH(x)	    _SB_GETVALUE(x, S_MAC_RX_RL_THRSH, M_MAC_RX_RL_THRSH)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define S_MAC_ENC_FC_THRSH           _SB_MAKE64(56)
-#define M_MAC_ENC_FC_THRSH           _SB_MAKEMASK(6, S_MAC_ENC_FC_THRSH)
-#define V_MAC_ENC_FC_THRSH(x)        _SB_MAKEVALUE(x, S_MAC_ENC_FC_THRSH)
-#define G_MAC_ENC_FC_THRSH(x)        _SB_GETVALUE(x, S_MAC_ENC_FC_THRSH, M_MAC_ENC_FC_THRSH)
+#define S_MAC_ENC_FC_THRSH	     _SB_MAKE64(56)
+#define M_MAC_ENC_FC_THRSH	     _SB_MAKEMASK(6, S_MAC_ENC_FC_THRSH)
+#define V_MAC_ENC_FC_THRSH(x)	     _SB_MAKEVALUE(x, S_MAC_ENC_FC_THRSH)
+#define G_MAC_ENC_FC_THRSH(x)	     _SB_GETVALUE(x, S_MAC_ENC_FC_THRSH, M_MAC_ENC_FC_THRSH)
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 /*
@@ -275,79 +275,79 @@
  */
 
 /* XXXCGD: ??? Unused in pass2? */
-#define S_MAC_IFG_RX                _SB_MAKE64(0)
-#define M_MAC_IFG_RX                _SB_MAKEMASK(6, S_MAC_IFG_RX)
-#define V_MAC_IFG_RX(x)             _SB_MAKEVALUE(x, S_MAC_IFG_RX)
-#define G_MAC_IFG_RX(x)             _SB_GETVALUE(x, S_MAC_IFG_RX, M_MAC_IFG_RX)
+#define S_MAC_IFG_RX		    _SB_MAKE64(0)
+#define M_MAC_IFG_RX		    _SB_MAKEMASK(6, S_MAC_IFG_RX)
+#define V_MAC_IFG_RX(x)		    _SB_MAKEVALUE(x, S_MAC_IFG_RX)
+#define G_MAC_IFG_RX(x)		    _SB_GETVALUE(x, S_MAC_IFG_RX, M_MAC_IFG_RX)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define S_MAC_PRE_LEN               _SB_MAKE64(0)
-#define M_MAC_PRE_LEN               _SB_MAKEMASK(6, S_MAC_PRE_LEN)
-#define V_MAC_PRE_LEN(x)            _SB_MAKEVALUE(x, S_MAC_PRE_LEN)
-#define G_MAC_PRE_LEN(x)            _SB_GETVALUE(x, S_MAC_PRE_LEN, M_MAC_PRE_LEN)
+#define S_MAC_PRE_LEN		    _SB_MAKE64(0)
+#define M_MAC_PRE_LEN		    _SB_MAKEMASK(6, S_MAC_PRE_LEN)
+#define V_MAC_PRE_LEN(x)	    _SB_MAKEVALUE(x, S_MAC_PRE_LEN)
+#define G_MAC_PRE_LEN(x)	    _SB_GETVALUE(x, S_MAC_PRE_LEN, M_MAC_PRE_LEN)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
-#define S_MAC_IFG_TX                _SB_MAKE64(6)
-#define M_MAC_IFG_TX                _SB_MAKEMASK(6, S_MAC_IFG_TX)
-#define V_MAC_IFG_TX(x)             _SB_MAKEVALUE(x, S_MAC_IFG_TX)
-#define G_MAC_IFG_TX(x)             _SB_GETVALUE(x, S_MAC_IFG_TX, M_MAC_IFG_TX)
+#define S_MAC_IFG_TX		    _SB_MAKE64(6)
+#define M_MAC_IFG_TX		    _SB_MAKEMASK(6, S_MAC_IFG_TX)
+#define V_MAC_IFG_TX(x)		    _SB_MAKEVALUE(x, S_MAC_IFG_TX)
+#define G_MAC_IFG_TX(x)		    _SB_GETVALUE(x, S_MAC_IFG_TX, M_MAC_IFG_TX)
 
-#define S_MAC_IFG_THRSH             _SB_MAKE64(12)
-#define M_MAC_IFG_THRSH             _SB_MAKEMASK(6, S_MAC_IFG_THRSH)
-#define V_MAC_IFG_THRSH(x)          _SB_MAKEVALUE(x, S_MAC_IFG_THRSH)
-#define G_MAC_IFG_THRSH(x)          _SB_GETVALUE(x, S_MAC_IFG_THRSH, M_MAC_IFG_THRSH)
+#define S_MAC_IFG_THRSH		    _SB_MAKE64(12)
+#define M_MAC_IFG_THRSH		    _SB_MAKEMASK(6, S_MAC_IFG_THRSH)
+#define V_MAC_IFG_THRSH(x)	    _SB_MAKEVALUE(x, S_MAC_IFG_THRSH)
+#define G_MAC_IFG_THRSH(x)	    _SB_GETVALUE(x, S_MAC_IFG_THRSH, M_MAC_IFG_THRSH)
 
-#define S_MAC_BACKOFF_SEL           _SB_MAKE64(18)
-#define M_MAC_BACKOFF_SEL           _SB_MAKEMASK(4, S_MAC_BACKOFF_SEL)
-#define V_MAC_BACKOFF_SEL(x)        _SB_MAKEVALUE(x, S_MAC_BACKOFF_SEL)
-#define G_MAC_BACKOFF_SEL(x)        _SB_GETVALUE(x, S_MAC_BACKOFF_SEL, M_MAC_BACKOFF_SEL)
+#define S_MAC_BACKOFF_SEL	    _SB_MAKE64(18)
+#define M_MAC_BACKOFF_SEL	    _SB_MAKEMASK(4, S_MAC_BACKOFF_SEL)
+#define V_MAC_BACKOFF_SEL(x)	    _SB_MAKEVALUE(x, S_MAC_BACKOFF_SEL)
+#define G_MAC_BACKOFF_SEL(x)	    _SB_GETVALUE(x, S_MAC_BACKOFF_SEL, M_MAC_BACKOFF_SEL)
 
-#define S_MAC_LFSR_SEED             _SB_MAKE64(22)
-#define M_MAC_LFSR_SEED             _SB_MAKEMASK(8, S_MAC_LFSR_SEED)
-#define V_MAC_LFSR_SEED(x)          _SB_MAKEVALUE(x, S_MAC_LFSR_SEED)
-#define G_MAC_LFSR_SEED(x)          _SB_GETVALUE(x, S_MAC_LFSR_SEED, M_MAC_LFSR_SEED)
+#define S_MAC_LFSR_SEED		    _SB_MAKE64(22)
+#define M_MAC_LFSR_SEED		    _SB_MAKEMASK(8, S_MAC_LFSR_SEED)
+#define V_MAC_LFSR_SEED(x)	    _SB_MAKEVALUE(x, S_MAC_LFSR_SEED)
+#define G_MAC_LFSR_SEED(x)	    _SB_GETVALUE(x, S_MAC_LFSR_SEED, M_MAC_LFSR_SEED)
 
-#define S_MAC_SLOT_SIZE             _SB_MAKE64(30)
-#define M_MAC_SLOT_SIZE             _SB_MAKEMASK(10, S_MAC_SLOT_SIZE)
-#define V_MAC_SLOT_SIZE(x)          _SB_MAKEVALUE(x, S_MAC_SLOT_SIZE)
-#define G_MAC_SLOT_SIZE(x)          _SB_GETVALUE(x, S_MAC_SLOT_SIZE, M_MAC_SLOT_SIZE)
+#define S_MAC_SLOT_SIZE		    _SB_MAKE64(30)
+#define M_MAC_SLOT_SIZE		    _SB_MAKEMASK(10, S_MAC_SLOT_SIZE)
+#define V_MAC_SLOT_SIZE(x)	    _SB_MAKEVALUE(x, S_MAC_SLOT_SIZE)
+#define G_MAC_SLOT_SIZE(x)	    _SB_GETVALUE(x, S_MAC_SLOT_SIZE, M_MAC_SLOT_SIZE)
 
-#define S_MAC_MIN_FRAMESZ           _SB_MAKE64(40)
-#define M_MAC_MIN_FRAMESZ           _SB_MAKEMASK(8, S_MAC_MIN_FRAMESZ)
-#define V_MAC_MIN_FRAMESZ(x)        _SB_MAKEVALUE(x, S_MAC_MIN_FRAMESZ)
-#define G_MAC_MIN_FRAMESZ(x)        _SB_GETVALUE(x, S_MAC_MIN_FRAMESZ, M_MAC_MIN_FRAMESZ)
+#define S_MAC_MIN_FRAMESZ	    _SB_MAKE64(40)
+#define M_MAC_MIN_FRAMESZ	    _SB_MAKEMASK(8, S_MAC_MIN_FRAMESZ)
+#define V_MAC_MIN_FRAMESZ(x)	    _SB_MAKEVALUE(x, S_MAC_MIN_FRAMESZ)
+#define G_MAC_MIN_FRAMESZ(x)	    _SB_GETVALUE(x, S_MAC_MIN_FRAMESZ, M_MAC_MIN_FRAMESZ)
 
-#define S_MAC_MAX_FRAMESZ           _SB_MAKE64(48)
-#define M_MAC_MAX_FRAMESZ           _SB_MAKEMASK(16, S_MAC_MAX_FRAMESZ)
-#define V_MAC_MAX_FRAMESZ(x)        _SB_MAKEVALUE(x, S_MAC_MAX_FRAMESZ)
-#define G_MAC_MAX_FRAMESZ(x)        _SB_GETVALUE(x, S_MAC_MAX_FRAMESZ, M_MAC_MAX_FRAMESZ)
+#define S_MAC_MAX_FRAMESZ	    _SB_MAKE64(48)
+#define M_MAC_MAX_FRAMESZ	    _SB_MAKEMASK(16, S_MAC_MAX_FRAMESZ)
+#define V_MAC_MAX_FRAMESZ(x)	    _SB_MAKEVALUE(x, S_MAC_MAX_FRAMESZ)
+#define G_MAC_MAX_FRAMESZ(x)	    _SB_GETVALUE(x, S_MAC_MAX_FRAMESZ, M_MAC_MAX_FRAMESZ)
 
 /*
  * These constants are used to configure the fields within the Frame
  * Configuration Register.
  */
 
-#define K_MAC_IFG_RX_10             _SB_MAKE64(0)	/* See table 176, not used */
-#define K_MAC_IFG_RX_100            _SB_MAKE64(0)
-#define K_MAC_IFG_RX_1000           _SB_MAKE64(0)
+#define K_MAC_IFG_RX_10		    _SB_MAKE64(0)	/* See table 176, not used */
+#define K_MAC_IFG_RX_100	    _SB_MAKE64(0)
+#define K_MAC_IFG_RX_1000	    _SB_MAKE64(0)
 
-#define K_MAC_IFG_TX_10             _SB_MAKE64(20)
-#define K_MAC_IFG_TX_100            _SB_MAKE64(20)
-#define K_MAC_IFG_TX_1000           _SB_MAKE64(8)
+#define K_MAC_IFG_TX_10		    _SB_MAKE64(20)
+#define K_MAC_IFG_TX_100	    _SB_MAKE64(20)
+#define K_MAC_IFG_TX_1000	    _SB_MAKE64(8)
 
-#define K_MAC_IFG_THRSH_10          _SB_MAKE64(4)
-#define K_MAC_IFG_THRSH_100         _SB_MAKE64(4)
-#define K_MAC_IFG_THRSH_1000        _SB_MAKE64(0)
+#define K_MAC_IFG_THRSH_10	    _SB_MAKE64(4)
+#define K_MAC_IFG_THRSH_100	    _SB_MAKE64(4)
+#define K_MAC_IFG_THRSH_1000	    _SB_MAKE64(0)
 
-#define K_MAC_SLOT_SIZE_10          _SB_MAKE64(0)
-#define K_MAC_SLOT_SIZE_100         _SB_MAKE64(0)
-#define K_MAC_SLOT_SIZE_1000        _SB_MAKE64(0)
+#define K_MAC_SLOT_SIZE_10	    _SB_MAKE64(0)
+#define K_MAC_SLOT_SIZE_100	    _SB_MAKE64(0)
+#define K_MAC_SLOT_SIZE_1000	    _SB_MAKE64(0)
 
-#define V_MAC_IFG_RX_10        V_MAC_IFG_RX(K_MAC_IFG_RX_10)
+#define V_MAC_IFG_RX_10	       V_MAC_IFG_RX(K_MAC_IFG_RX_10)
 #define V_MAC_IFG_RX_100       V_MAC_IFG_RX(K_MAC_IFG_RX_100)
 #define V_MAC_IFG_RX_1000      V_MAC_IFG_RX(K_MAC_IFG_RX_1000)
 
-#define V_MAC_IFG_TX_10        V_MAC_IFG_TX(K_MAC_IFG_TX_10)
+#define V_MAC_IFG_TX_10	       V_MAC_IFG_TX(K_MAC_IFG_TX_10)
 #define V_MAC_IFG_TX_100       V_MAC_IFG_TX(K_MAC_IFG_TX_100)
 #define V_MAC_IFG_TX_1000      V_MAC_IFG_TX(K_MAC_IFG_TX_1000)
 
@@ -359,15 +359,15 @@
 #define V_MAC_SLOT_SIZE_100    V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_100)
 #define V_MAC_SLOT_SIZE_1000   V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_1000)
 
-#define K_MAC_MIN_FRAMESZ_FIFO      _SB_MAKE64(9)
+#define K_MAC_MIN_FRAMESZ_FIFO	    _SB_MAKE64(9)
 #define K_MAC_MIN_FRAMESZ_DEFAULT   _SB_MAKE64(64)
 #define K_MAC_MAX_FRAMESZ_DEFAULT   _SB_MAKE64(1518)
-#define K_MAC_MAX_FRAMESZ_JUMBO     _SB_MAKE64(9216)
+#define K_MAC_MAX_FRAMESZ_JUMBO	    _SB_MAKE64(9216)
 
-#define V_MAC_MIN_FRAMESZ_FIFO      V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_FIFO)
+#define V_MAC_MIN_FRAMESZ_FIFO	    V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_FIFO)
 #define V_MAC_MIN_FRAMESZ_DEFAULT   V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_DEFAULT)
 #define V_MAC_MAX_FRAMESZ_DEFAULT   V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_DEFAULT)
-#define V_MAC_MAX_FRAMESZ_JUMBO     V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_JUMBO)
+#define V_MAC_MAX_FRAMESZ_JUMBO	    V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_JUMBO)
 
 /*
  * MAC VLAN Tag Registers (Table 9-16)
@@ -376,23 +376,23 @@
  * Register: MAC_VLANTAG_2
  */
 
-#define S_MAC_VLAN_TAG           _SB_MAKE64(0)
-#define M_MAC_VLAN_TAG           _SB_MAKEMASK(32, S_MAC_VLAN_TAG)
-#define V_MAC_VLAN_TAG(x)        _SB_MAKEVALUE(x, S_MAC_VLAN_TAG)
-#define G_MAC_VLAN_TAG(x)        _SB_GETVALUE(x, S_MAC_VLAN_TAG, M_MAC_VLAN_TAG)
+#define S_MAC_VLAN_TAG		 _SB_MAKE64(0)
+#define M_MAC_VLAN_TAG		 _SB_MAKEMASK(32, S_MAC_VLAN_TAG)
+#define V_MAC_VLAN_TAG(x)	 _SB_MAKEVALUE(x, S_MAC_VLAN_TAG)
+#define G_MAC_VLAN_TAG(x)	 _SB_GETVALUE(x, S_MAC_VLAN_TAG, M_MAC_VLAN_TAG)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
-#define S_MAC_TX_PKT_OFFSET      _SB_MAKE64(32)
-#define M_MAC_TX_PKT_OFFSET      _SB_MAKEMASK(8, S_MAC_TX_PKT_OFFSET)
-#define V_MAC_TX_PKT_OFFSET(x)   _SB_MAKEVALUE(x, S_MAC_TX_PKT_OFFSET)
-#define G_MAC_TX_PKT_OFFSET(x)   _SB_GETVALUE(x, S_MAC_TX_PKT_OFFSET, M_MAC_TX_PKT_OFFSET)
+#define S_MAC_TX_PKT_OFFSET	 _SB_MAKE64(32)
+#define M_MAC_TX_PKT_OFFSET	 _SB_MAKEMASK(8, S_MAC_TX_PKT_OFFSET)
+#define V_MAC_TX_PKT_OFFSET(x)	 _SB_MAKEVALUE(x, S_MAC_TX_PKT_OFFSET)
+#define G_MAC_TX_PKT_OFFSET(x)	 _SB_GETVALUE(x, S_MAC_TX_PKT_OFFSET, M_MAC_TX_PKT_OFFSET)
 
-#define S_MAC_TX_CRC_OFFSET      _SB_MAKE64(40)
-#define M_MAC_TX_CRC_OFFSET      _SB_MAKEMASK(8, S_MAC_TX_CRC_OFFSET)
-#define V_MAC_TX_CRC_OFFSET(x)   _SB_MAKEVALUE(x, S_MAC_TX_CRC_OFFSET)
-#define G_MAC_TX_CRC_OFFSET(x)   _SB_GETVALUE(x, S_MAC_TX_CRC_OFFSET, M_MAC_TX_CRC_OFFSET)
+#define S_MAC_TX_CRC_OFFSET	 _SB_MAKE64(40)
+#define M_MAC_TX_CRC_OFFSET	 _SB_MAKEMASK(8, S_MAC_TX_CRC_OFFSET)
+#define V_MAC_TX_CRC_OFFSET(x)	 _SB_MAKEVALUE(x, S_MAC_TX_CRC_OFFSET)
+#define G_MAC_TX_CRC_OFFSET(x)	 _SB_GETVALUE(x, S_MAC_TX_CRC_OFFSET, M_MAC_TX_CRC_OFFSET)
 
-#define M_MAC_CH_BASE_FC_EN      _SB_MAKEMASK1(48)
+#define M_MAC_CH_BASE_FC_EN	 _SB_MAKEMASK1(48)
 #endif /* 1250 PASS3 || 112x PASS1 */
 
 /*
@@ -412,29 +412,29 @@
  * on each channel.
  */
 
-#define S_MAC_RX_CH0                _SB_MAKE64(0)
-#define S_MAC_RX_CH1                _SB_MAKE64(8)
-#define S_MAC_TX_CH0                _SB_MAKE64(16)
-#define S_MAC_TX_CH1                _SB_MAKE64(24)
+#define S_MAC_RX_CH0		    _SB_MAKE64(0)
+#define S_MAC_RX_CH1		    _SB_MAKE64(8)
+#define S_MAC_TX_CH0		    _SB_MAKE64(16)
+#define S_MAC_TX_CH1		    _SB_MAKE64(24)
 
 #define S_MAC_TXCHANNELS	    _SB_MAKE64(16)	/* this is 1st TX chan */
-#define S_MAC_CHANWIDTH             _SB_MAKE64(8)	/* bits between channels */
+#define S_MAC_CHANWIDTH		    _SB_MAKE64(8)	/* bits between channels */
 
 /*
- *  These are the same as RX channel 0.  The idea here
+ *  These are the same as RX channel 0.	 The idea here
  *  is that you'll use one of the "S_" things above
  *  and pass just the six bits to a DMA-channel-specific ISR
  */
-#define M_MAC_INT_CHANNEL           _SB_MAKEMASK(8, 0)
-#define M_MAC_INT_EOP_COUNT         _SB_MAKEMASK1(0)
-#define M_MAC_INT_EOP_TIMER         _SB_MAKEMASK1(1)
-#define M_MAC_INT_EOP_SEEN          _SB_MAKEMASK1(2)
-#define M_MAC_INT_HWM               _SB_MAKEMASK1(3)
-#define M_MAC_INT_LWM               _SB_MAKEMASK1(4)
-#define M_MAC_INT_DSCR              _SB_MAKEMASK1(5)
-#define M_MAC_INT_ERR               _SB_MAKEMASK1(6)
-#define M_MAC_INT_DZERO             _SB_MAKEMASK1(7)	/* only for TX channels */
-#define M_MAC_INT_DROP              _SB_MAKEMASK1(7)	/* only for RX channels */
+#define M_MAC_INT_CHANNEL	    _SB_MAKEMASK(8, 0)
+#define M_MAC_INT_EOP_COUNT	    _SB_MAKEMASK1(0)
+#define M_MAC_INT_EOP_TIMER	    _SB_MAKEMASK1(1)
+#define M_MAC_INT_EOP_SEEN	    _SB_MAKEMASK1(2)
+#define M_MAC_INT_HWM		    _SB_MAKEMASK1(3)
+#define M_MAC_INT_LWM		    _SB_MAKEMASK1(4)
+#define M_MAC_INT_DSCR		    _SB_MAKEMASK1(5)
+#define M_MAC_INT_ERR		    _SB_MAKEMASK1(6)
+#define M_MAC_INT_DZERO		    _SB_MAKEMASK1(7)	/* only for TX channels */
+#define M_MAC_INT_DROP		    _SB_MAKEMASK1(7)	/* only for RX channels */
 
 /*
  * In the following definitions we use ch (0/1) and txrx (TX=1, RX=0, see
@@ -442,34 +442,34 @@
  */
 #define S_MAC_STATUS_CH_OFFSET(ch, txrx) _SB_MAKE64(((ch) + 2 * (txrx)) * S_MAC_CHANWIDTH)
 
-#define M_MAC_STATUS_CHANNEL(ch, txrx)   _SB_MAKEVALUE(_SB_MAKEMASK(8, 0), S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_CHANNEL(ch, txrx)	 _SB_MAKEVALUE(_SB_MAKEMASK(8, 0), S_MAC_STATUS_CH_OFFSET(ch, txrx))
 #define M_MAC_STATUS_EOP_COUNT(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_COUNT, S_MAC_STATUS_CH_OFFSET(ch, txrx))
 #define M_MAC_STATUS_EOP_TIMER(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_TIMER, S_MAC_STATUS_CH_OFFSET(ch, txrx))
-#define M_MAC_STATUS_EOP_SEEN(ch, txrx)  _SB_MAKEVALUE(M_MAC_INT_EOP_SEEN, S_MAC_STATUS_CH_OFFSET(ch, txrx))
-#define M_MAC_STATUS_HWM(ch, txrx)       _SB_MAKEVALUE(M_MAC_INT_HWM, S_MAC_STATUS_CH_OFFSET(ch, txrx))
-#define M_MAC_STATUS_LWM(ch, txrx)       _SB_MAKEVALUE(M_MAC_INT_LWM, S_MAC_STATUS_CH_OFFSET(ch, txrx))
-#define M_MAC_STATUS_DSCR(ch, txrx)      _SB_MAKEVALUE(M_MAC_INT_DSCR, S_MAC_STATUS_CH_OFFSET(ch, txrx))
-#define M_MAC_STATUS_ERR(ch, txrx)       _SB_MAKEVALUE(M_MAC_INT_ERR, S_MAC_STATUS_CH_OFFSET(ch, txrx))
-#define M_MAC_STATUS_DZERO(ch, txrx)     _SB_MAKEVALUE(M_MAC_INT_DZERO, S_MAC_STATUS_CH_OFFSET(ch, txrx))
-#define M_MAC_STATUS_DROP(ch, txrx)      _SB_MAKEVALUE(M_MAC_INT_DROP, S_MAC_STATUS_CH_OFFSET(ch, txrx))
-#define M_MAC_STATUS_OTHER_ERR           _SB_MAKEVALUE(_SB_MAKEMASK(7, 0), 40)
+#define M_MAC_STATUS_EOP_SEEN(ch, txrx)	 _SB_MAKEVALUE(M_MAC_INT_EOP_SEEN, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_HWM(ch, txrx)	 _SB_MAKEVALUE(M_MAC_INT_HWM, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_LWM(ch, txrx)	 _SB_MAKEVALUE(M_MAC_INT_LWM, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_DSCR(ch, txrx)	 _SB_MAKEVALUE(M_MAC_INT_DSCR, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_ERR(ch, txrx)	 _SB_MAKEVALUE(M_MAC_INT_ERR, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_DZERO(ch, txrx)	 _SB_MAKEVALUE(M_MAC_INT_DZERO, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_DROP(ch, txrx)	 _SB_MAKEVALUE(M_MAC_INT_DROP, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_OTHER_ERR		 _SB_MAKEVALUE(_SB_MAKEMASK(7, 0), 40)
 
 
-#define M_MAC_RX_UNDRFL             _SB_MAKEMASK1(40)
-#define M_MAC_RX_OVRFL              _SB_MAKEMASK1(41)
-#define M_MAC_TX_UNDRFL             _SB_MAKEMASK1(42)
-#define M_MAC_TX_OVRFL              _SB_MAKEMASK1(43)
-#define M_MAC_LTCOL_ERR             _SB_MAKEMASK1(44)
-#define M_MAC_EXCOL_ERR             _SB_MAKEMASK1(45)
-#define M_MAC_CNTR_OVRFL_ERR        _SB_MAKEMASK1(46)
+#define M_MAC_RX_UNDRFL		    _SB_MAKEMASK1(40)
+#define M_MAC_RX_OVRFL		    _SB_MAKEMASK1(41)
+#define M_MAC_TX_UNDRFL		    _SB_MAKEMASK1(42)
+#define M_MAC_TX_OVRFL		    _SB_MAKEMASK1(43)
+#define M_MAC_LTCOL_ERR		    _SB_MAKEMASK1(44)
+#define M_MAC_EXCOL_ERR		    _SB_MAKEMASK1(45)
+#define M_MAC_CNTR_OVRFL_ERR	    _SB_MAKEMASK1(46)
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define M_MAC_SPLIT_EN		    _SB_MAKEMASK1(47) 	/* interrupt mask only */
+#define M_MAC_SPLIT_EN		    _SB_MAKEMASK1(47)	/* interrupt mask only */
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
-#define S_MAC_COUNTER_ADDR          _SB_MAKE64(47)
-#define M_MAC_COUNTER_ADDR          _SB_MAKEMASK(5, S_MAC_COUNTER_ADDR)
-#define V_MAC_COUNTER_ADDR(x)       _SB_MAKEVALUE(x, S_MAC_COUNTER_ADDR)
-#define G_MAC_COUNTER_ADDR(x)       _SB_GETVALUE(x, S_MAC_COUNTER_ADDR, M_MAC_COUNTER_ADDR)
+#define S_MAC_COUNTER_ADDR	    _SB_MAKE64(47)
+#define M_MAC_COUNTER_ADDR	    _SB_MAKEMASK(5, S_MAC_COUNTER_ADDR)
+#define V_MAC_COUNTER_ADDR(x)	    _SB_MAKEVALUE(x, S_MAC_COUNTER_ADDR)
+#define G_MAC_COUNTER_ADDR(x)	    _SB_GETVALUE(x, S_MAC_COUNTER_ADDR, M_MAC_COUNTER_ADDR)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_TX_PAUSE_ON	    _SB_MAKEMASK1(52)
@@ -482,42 +482,42 @@
  * Register: MAC_FIFO_PTRS_2
  */
 
-#define S_MAC_TX_WRPTR              _SB_MAKE64(0)
-#define M_MAC_TX_WRPTR              _SB_MAKEMASK(6, S_MAC_TX_WRPTR)
-#define V_MAC_TX_WRPTR(x)           _SB_MAKEVALUE(x, S_MAC_TX_WRPTR)
-#define G_MAC_TX_WRPTR(x)           _SB_GETVALUE(x, S_MAC_TX_WRPTR, M_MAC_TX_WRPTR)
+#define S_MAC_TX_WRPTR		    _SB_MAKE64(0)
+#define M_MAC_TX_WRPTR		    _SB_MAKEMASK(6, S_MAC_TX_WRPTR)
+#define V_MAC_TX_WRPTR(x)	    _SB_MAKEVALUE(x, S_MAC_TX_WRPTR)
+#define G_MAC_TX_WRPTR(x)	    _SB_GETVALUE(x, S_MAC_TX_WRPTR, M_MAC_TX_WRPTR)
 
-#define S_MAC_TX_RDPTR              _SB_MAKE64(8)
-#define M_MAC_TX_RDPTR              _SB_MAKEMASK(6, S_MAC_TX_RDPTR)
-#define V_MAC_TX_RDPTR(x)           _SB_MAKEVALUE(x, S_MAC_TX_RDPTR)
-#define G_MAC_TX_RDPTR(x)           _SB_GETVALUE(x, S_MAC_TX_RDPTR, M_MAC_TX_RDPTR)
+#define S_MAC_TX_RDPTR		    _SB_MAKE64(8)
+#define M_MAC_TX_RDPTR		    _SB_MAKEMASK(6, S_MAC_TX_RDPTR)
+#define V_MAC_TX_RDPTR(x)	    _SB_MAKEVALUE(x, S_MAC_TX_RDPTR)
+#define G_MAC_TX_RDPTR(x)	    _SB_GETVALUE(x, S_MAC_TX_RDPTR, M_MAC_TX_RDPTR)
 
-#define S_MAC_RX_WRPTR              _SB_MAKE64(16)
-#define M_MAC_RX_WRPTR              _SB_MAKEMASK(6, S_MAC_RX_WRPTR)
-#define V_MAC_RX_WRPTR(x)           _SB_MAKEVALUE(x, S_MAC_RX_WRPTR)
-#define G_MAC_RX_WRPTR(x)           _SB_GETVALUE(x, S_MAC_RX_WRPTR, M_MAC_TX_WRPTR)
+#define S_MAC_RX_WRPTR		    _SB_MAKE64(16)
+#define M_MAC_RX_WRPTR		    _SB_MAKEMASK(6, S_MAC_RX_WRPTR)
+#define V_MAC_RX_WRPTR(x)	    _SB_MAKEVALUE(x, S_MAC_RX_WRPTR)
+#define G_MAC_RX_WRPTR(x)	    _SB_GETVALUE(x, S_MAC_RX_WRPTR, M_MAC_TX_WRPTR)
 
-#define S_MAC_RX_RDPTR              _SB_MAKE64(24)
-#define M_MAC_RX_RDPTR              _SB_MAKEMASK(6, S_MAC_RX_RDPTR)
-#define V_MAC_RX_RDPTR(x)           _SB_MAKEVALUE(x, S_MAC_RX_RDPTR)
-#define G_MAC_RX_RDPTR(x)           _SB_GETVALUE(x, S_MAC_RX_RDPTR, M_MAC_TX_RDPTR)
+#define S_MAC_RX_RDPTR		    _SB_MAKE64(24)
+#define M_MAC_RX_RDPTR		    _SB_MAKEMASK(6, S_MAC_RX_RDPTR)
+#define V_MAC_RX_RDPTR(x)	    _SB_MAKEVALUE(x, S_MAC_RX_RDPTR)
+#define G_MAC_RX_RDPTR(x)	    _SB_GETVALUE(x, S_MAC_RX_RDPTR, M_MAC_TX_RDPTR)
 
 /*
- * MAC Fifo End Of Packet Count Registers (Table 9-20)  [Debug register]
+ * MAC Fifo End Of Packet Count Registers (Table 9-20)	[Debug register]
  * Register: MAC_EOPCNT_0
  * Register: MAC_EOPCNT_1
  * Register: MAC_EOPCNT_2
  */
 
-#define S_MAC_TX_EOP_COUNTER        _SB_MAKE64(0)
-#define M_MAC_TX_EOP_COUNTER        _SB_MAKEMASK(6, S_MAC_TX_EOP_COUNTER)
-#define V_MAC_TX_EOP_COUNTER(x)     _SB_MAKEVALUE(x, S_MAC_TX_EOP_COUNTER)
-#define G_MAC_TX_EOP_COUNTER(x)     _SB_GETVALUE(x, S_MAC_TX_EOP_COUNTER, M_MAC_TX_EOP_COUNTER)
+#define S_MAC_TX_EOP_COUNTER	    _SB_MAKE64(0)
+#define M_MAC_TX_EOP_COUNTER	    _SB_MAKEMASK(6, S_MAC_TX_EOP_COUNTER)
+#define V_MAC_TX_EOP_COUNTER(x)	    _SB_MAKEVALUE(x, S_MAC_TX_EOP_COUNTER)
+#define G_MAC_TX_EOP_COUNTER(x)	    _SB_GETVALUE(x, S_MAC_TX_EOP_COUNTER, M_MAC_TX_EOP_COUNTER)
 
-#define S_MAC_RX_EOP_COUNTER        _SB_MAKE64(8)
-#define M_MAC_RX_EOP_COUNTER        _SB_MAKEMASK(6, S_MAC_RX_EOP_COUNTER)
-#define V_MAC_RX_EOP_COUNTER(x)     _SB_MAKEVALUE(x, S_MAC_RX_EOP_COUNTER)
-#define G_MAC_RX_EOP_COUNTER(x)     _SB_GETVALUE(x, S_MAC_RX_EOP_COUNTER, M_MAC_RX_EOP_COUNTER)
+#define S_MAC_RX_EOP_COUNTER	    _SB_MAKE64(8)
+#define M_MAC_RX_EOP_COUNTER	    _SB_MAKEMASK(6, S_MAC_RX_EOP_COUNTER)
+#define V_MAC_RX_EOP_COUNTER(x)	    _SB_MAKEVALUE(x, S_MAC_RX_EOP_COUNTER)
+#define G_MAC_RX_EOP_COUNTER(x)	    _SB_GETVALUE(x, S_MAC_RX_EOP_COUNTER, M_MAC_RX_EOP_COUNTER)
 
 /*
  * MAC Receive Address Filter Exact Match Registers (Table 9-21)
@@ -562,27 +562,27 @@
  * Register: MAC_TYPE_CFG_2
  */
 
-#define S_TYPECFG_TYPESIZE      _SB_MAKE64(16)
+#define S_TYPECFG_TYPESIZE	_SB_MAKE64(16)
 
 #define S_TYPECFG_TYPE0		_SB_MAKE64(0)
-#define M_TYPECFG_TYPE0         _SB_MAKEMASK(16, S_TYPECFG_TYPE0)
-#define V_TYPECFG_TYPE0(x)      _SB_MAKEVALUE(x, S_TYPECFG_TYPE0)
-#define G_TYPECFG_TYPE0(x)      _SB_GETVALUE(x, S_TYPECFG_TYPE0, M_TYPECFG_TYPE0)
+#define M_TYPECFG_TYPE0		_SB_MAKEMASK(16, S_TYPECFG_TYPE0)
+#define V_TYPECFG_TYPE0(x)	_SB_MAKEVALUE(x, S_TYPECFG_TYPE0)
+#define G_TYPECFG_TYPE0(x)	_SB_GETVALUE(x, S_TYPECFG_TYPE0, M_TYPECFG_TYPE0)
 
 #define S_TYPECFG_TYPE1		_SB_MAKE64(0)
-#define M_TYPECFG_TYPE1         _SB_MAKEMASK(16, S_TYPECFG_TYPE1)
-#define V_TYPECFG_TYPE1(x)      _SB_MAKEVALUE(x, S_TYPECFG_TYPE1)
-#define G_TYPECFG_TYPE1(x)      _SB_GETVALUE(x, S_TYPECFG_TYPE1, M_TYPECFG_TYPE1)
+#define M_TYPECFG_TYPE1		_SB_MAKEMASK(16, S_TYPECFG_TYPE1)
+#define V_TYPECFG_TYPE1(x)	_SB_MAKEVALUE(x, S_TYPECFG_TYPE1)
+#define G_TYPECFG_TYPE1(x)	_SB_GETVALUE(x, S_TYPECFG_TYPE1, M_TYPECFG_TYPE1)
 
 #define S_TYPECFG_TYPE2		_SB_MAKE64(0)
-#define M_TYPECFG_TYPE2         _SB_MAKEMASK(16, S_TYPECFG_TYPE2)
-#define V_TYPECFG_TYPE2(x)      _SB_MAKEVALUE(x, S_TYPECFG_TYPE2)
-#define G_TYPECFG_TYPE2(x)      _SB_GETVALUE(x, S_TYPECFG_TYPE2, M_TYPECFG_TYPE2)
+#define M_TYPECFG_TYPE2		_SB_MAKEMASK(16, S_TYPECFG_TYPE2)
+#define V_TYPECFG_TYPE2(x)	_SB_MAKEVALUE(x, S_TYPECFG_TYPE2)
+#define G_TYPECFG_TYPE2(x)	_SB_GETVALUE(x, S_TYPECFG_TYPE2, M_TYPECFG_TYPE2)
 
 #define S_TYPECFG_TYPE3		_SB_MAKE64(0)
-#define M_TYPECFG_TYPE3         _SB_MAKEMASK(16, S_TYPECFG_TYPE3)
-#define V_TYPECFG_TYPE3(x)      _SB_MAKEVALUE(x, S_TYPECFG_TYPE3)
-#define G_TYPECFG_TYPE3(x)      _SB_GETVALUE(x, S_TYPECFG_TYPE3, M_TYPECFG_TYPE3)
+#define M_TYPECFG_TYPE3		_SB_MAKEMASK(16, S_TYPECFG_TYPE3)
+#define V_TYPECFG_TYPE3(x)	_SB_MAKEVALUE(x, S_TYPECFG_TYPE3)
+#define G_TYPECFG_TYPE3(x)	_SB_GETVALUE(x, S_TYPECFG_TYPE3, M_TYPECFG_TYPE3)
 
 /*
  * MAC Receive Address Filter Control Registers (Table 9-24)
@@ -591,38 +591,38 @@
  * Register: MAC_ADFILTER_CFG_2
  */
 
-#define M_MAC_ALLPKT_EN	        _SB_MAKEMASK1(0)
-#define M_MAC_UCAST_EN          _SB_MAKEMASK1(1)
-#define M_MAC_UCAST_INV         _SB_MAKEMASK1(2)
-#define M_MAC_MCAST_EN          _SB_MAKEMASK1(3)
-#define M_MAC_MCAST_INV         _SB_MAKEMASK1(4)
-#define M_MAC_BCAST_EN          _SB_MAKEMASK1(5)
-#define M_MAC_DIRECT_INV        _SB_MAKEMASK1(6)
+#define M_MAC_ALLPKT_EN		_SB_MAKEMASK1(0)
+#define M_MAC_UCAST_EN		_SB_MAKEMASK1(1)
+#define M_MAC_UCAST_INV		_SB_MAKEMASK1(2)
+#define M_MAC_MCAST_EN		_SB_MAKEMASK1(3)
+#define M_MAC_MCAST_INV		_SB_MAKEMASK1(4)
+#define M_MAC_BCAST_EN		_SB_MAKEMASK1(5)
+#define M_MAC_DIRECT_INV	_SB_MAKEMASK1(6)
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_ALLMCAST_EN	_SB_MAKEMASK1(7)
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
-#define S_MAC_IPHDR_OFFSET      _SB_MAKE64(8)
-#define M_MAC_IPHDR_OFFSET      _SB_MAKEMASK(8, S_MAC_IPHDR_OFFSET)
+#define S_MAC_IPHDR_OFFSET	_SB_MAKE64(8)
+#define M_MAC_IPHDR_OFFSET	_SB_MAKEMASK(8, S_MAC_IPHDR_OFFSET)
 #define V_MAC_IPHDR_OFFSET(x)	_SB_MAKEVALUE(x, S_MAC_IPHDR_OFFSET)
 #define G_MAC_IPHDR_OFFSET(x)	_SB_GETVALUE(x, S_MAC_IPHDR_OFFSET, M_MAC_IPHDR_OFFSET)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define S_MAC_RX_CRC_OFFSET     _SB_MAKE64(16)
-#define M_MAC_RX_CRC_OFFSET     _SB_MAKEMASK(8, S_MAC_RX_CRC_OFFSET)
+#define S_MAC_RX_CRC_OFFSET	_SB_MAKE64(16)
+#define M_MAC_RX_CRC_OFFSET	_SB_MAKEMASK(8, S_MAC_RX_CRC_OFFSET)
 #define V_MAC_RX_CRC_OFFSET(x)	_SB_MAKEVALUE(x, S_MAC_RX_CRC_OFFSET)
 #define G_MAC_RX_CRC_OFFSET(x)	_SB_GETVALUE(x, S_MAC_RX_CRC_OFFSET, M_MAC_RX_CRC_OFFSET)
 
-#define S_MAC_RX_PKT_OFFSET     _SB_MAKE64(24)
-#define M_MAC_RX_PKT_OFFSET     _SB_MAKEMASK(8, S_MAC_RX_PKT_OFFSET)
+#define S_MAC_RX_PKT_OFFSET	_SB_MAKE64(24)
+#define M_MAC_RX_PKT_OFFSET	_SB_MAKEMASK(8, S_MAC_RX_PKT_OFFSET)
 #define V_MAC_RX_PKT_OFFSET(x)	_SB_MAKEVALUE(x, S_MAC_RX_PKT_OFFSET)
 #define G_MAC_RX_PKT_OFFSET(x)	_SB_GETVALUE(x, S_MAC_RX_PKT_OFFSET, M_MAC_RX_PKT_OFFSET)
 
 #define M_MAC_FWDPAUSE_EN	_SB_MAKEMASK1(32)
 #define M_MAC_VLAN_DET_EN	_SB_MAKEMASK1(33)
 
-#define S_MAC_RX_CH_MSN_SEL     _SB_MAKE64(34)
-#define M_MAC_RX_CH_MSN_SEL     _SB_MAKEMASK(8, S_MAC_RX_CH_MSN_SEL)
+#define S_MAC_RX_CH_MSN_SEL	_SB_MAKE64(34)
+#define M_MAC_RX_CH_MSN_SEL	_SB_MAKEMASK(8, S_MAC_RX_CH_MSN_SEL)
 #define V_MAC_RX_CH_MSN_SEL(x)	_SB_MAKEVALUE(x, S_MAC_RX_CH_MSN_SEL)
 #define G_MAC_RX_CH_MSN_SEL(x)	_SB_GETVALUE(x, S_MAC_RX_CH_MSN_SEL, M_MAC_RX_CH_MSN_SEL)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
diff --git a/arch/mips/include/asm/sibyte/sb1250_mc.h b/arch/mips/include/asm/sibyte/sb1250_mc.h
index 15048dc..8368e41 100644
--- a/arch/mips/include/asm/sibyte/sb1250_mc.h
+++ b/arch/mips/include/asm/sibyte/sb1250_mc.h
@@ -1,7 +1,7 @@
 /*  *********************************************************************
     *  SB1250 Board Support Package
     *
-    *  Memory Controller constants              File: sb1250_mc.h
+    *  Memory Controller constants		File: sb1250_mc.h
     *
     *  This module contains constants and macros useful for
     *  programming the memory controller.
@@ -39,96 +39,96 @@
  * Memory Channel Config Register (table 6-14)
  */
 
-#define S_MC_RESERVED0              0
-#define M_MC_RESERVED0              _SB_MAKEMASK(8, S_MC_RESERVED0)
+#define S_MC_RESERVED0		    0
+#define M_MC_RESERVED0		    _SB_MAKEMASK(8, S_MC_RESERVED0)
 
-#define S_MC_CHANNEL_SEL            8
-#define M_MC_CHANNEL_SEL            _SB_MAKEMASK(8, S_MC_CHANNEL_SEL)
-#define V_MC_CHANNEL_SEL(x)         _SB_MAKEVALUE(x, S_MC_CHANNEL_SEL)
-#define G_MC_CHANNEL_SEL(x)         _SB_GETVALUE(x, S_MC_CHANNEL_SEL, M_MC_CHANNEL_SEL)
+#define S_MC_CHANNEL_SEL	    8
+#define M_MC_CHANNEL_SEL	    _SB_MAKEMASK(8, S_MC_CHANNEL_SEL)
+#define V_MC_CHANNEL_SEL(x)	    _SB_MAKEVALUE(x, S_MC_CHANNEL_SEL)
+#define G_MC_CHANNEL_SEL(x)	    _SB_GETVALUE(x, S_MC_CHANNEL_SEL, M_MC_CHANNEL_SEL)
 
-#define S_MC_BANK0_MAP              16
-#define M_MC_BANK0_MAP              _SB_MAKEMASK(4, S_MC_BANK0_MAP)
-#define V_MC_BANK0_MAP(x)           _SB_MAKEVALUE(x, S_MC_BANK0_MAP)
-#define G_MC_BANK0_MAP(x)           _SB_GETVALUE(x, S_MC_BANK0_MAP, M_MC_BANK0_MAP)
+#define S_MC_BANK0_MAP		    16
+#define M_MC_BANK0_MAP		    _SB_MAKEMASK(4, S_MC_BANK0_MAP)
+#define V_MC_BANK0_MAP(x)	    _SB_MAKEVALUE(x, S_MC_BANK0_MAP)
+#define G_MC_BANK0_MAP(x)	    _SB_GETVALUE(x, S_MC_BANK0_MAP, M_MC_BANK0_MAP)
 
-#define K_MC_BANK0_MAP_DEFAULT      0x00
-#define V_MC_BANK0_MAP_DEFAULT      V_MC_BANK0_MAP(K_MC_BANK0_MAP_DEFAULT)
+#define K_MC_BANK0_MAP_DEFAULT	    0x00
+#define V_MC_BANK0_MAP_DEFAULT	    V_MC_BANK0_MAP(K_MC_BANK0_MAP_DEFAULT)
 
-#define S_MC_BANK1_MAP              20
-#define M_MC_BANK1_MAP              _SB_MAKEMASK(4, S_MC_BANK1_MAP)
-#define V_MC_BANK1_MAP(x)           _SB_MAKEVALUE(x, S_MC_BANK1_MAP)
-#define G_MC_BANK1_MAP(x)           _SB_GETVALUE(x, S_MC_BANK1_MAP, M_MC_BANK1_MAP)
+#define S_MC_BANK1_MAP		    20
+#define M_MC_BANK1_MAP		    _SB_MAKEMASK(4, S_MC_BANK1_MAP)
+#define V_MC_BANK1_MAP(x)	    _SB_MAKEVALUE(x, S_MC_BANK1_MAP)
+#define G_MC_BANK1_MAP(x)	    _SB_GETVALUE(x, S_MC_BANK1_MAP, M_MC_BANK1_MAP)
 
-#define K_MC_BANK1_MAP_DEFAULT      0x08
-#define V_MC_BANK1_MAP_DEFAULT      V_MC_BANK1_MAP(K_MC_BANK1_MAP_DEFAULT)
+#define K_MC_BANK1_MAP_DEFAULT	    0x08
+#define V_MC_BANK1_MAP_DEFAULT	    V_MC_BANK1_MAP(K_MC_BANK1_MAP_DEFAULT)
 
-#define S_MC_BANK2_MAP              24
-#define M_MC_BANK2_MAP              _SB_MAKEMASK(4, S_MC_BANK2_MAP)
-#define V_MC_BANK2_MAP(x)           _SB_MAKEVALUE(x, S_MC_BANK2_MAP)
-#define G_MC_BANK2_MAP(x)           _SB_GETVALUE(x, S_MC_BANK2_MAP, M_MC_BANK2_MAP)
+#define S_MC_BANK2_MAP		    24
+#define M_MC_BANK2_MAP		    _SB_MAKEMASK(4, S_MC_BANK2_MAP)
+#define V_MC_BANK2_MAP(x)	    _SB_MAKEVALUE(x, S_MC_BANK2_MAP)
+#define G_MC_BANK2_MAP(x)	    _SB_GETVALUE(x, S_MC_BANK2_MAP, M_MC_BANK2_MAP)
 
-#define K_MC_BANK2_MAP_DEFAULT      0x09
-#define V_MC_BANK2_MAP_DEFAULT      V_MC_BANK2_MAP(K_MC_BANK2_MAP_DEFAULT)
+#define K_MC_BANK2_MAP_DEFAULT	    0x09
+#define V_MC_BANK2_MAP_DEFAULT	    V_MC_BANK2_MAP(K_MC_BANK2_MAP_DEFAULT)
 
-#define S_MC_BANK3_MAP              28
-#define M_MC_BANK3_MAP              _SB_MAKEMASK(4, S_MC_BANK3_MAP)
-#define V_MC_BANK3_MAP(x)           _SB_MAKEVALUE(x, S_MC_BANK3_MAP)
-#define G_MC_BANK3_MAP(x)           _SB_GETVALUE(x, S_MC_BANK3_MAP, M_MC_BANK3_MAP)
+#define S_MC_BANK3_MAP		    28
+#define M_MC_BANK3_MAP		    _SB_MAKEMASK(4, S_MC_BANK3_MAP)
+#define V_MC_BANK3_MAP(x)	    _SB_MAKEVALUE(x, S_MC_BANK3_MAP)
+#define G_MC_BANK3_MAP(x)	    _SB_GETVALUE(x, S_MC_BANK3_MAP, M_MC_BANK3_MAP)
 
-#define K_MC_BANK3_MAP_DEFAULT      0x0C
-#define V_MC_BANK3_MAP_DEFAULT      V_MC_BANK3_MAP(K_MC_BANK3_MAP_DEFAULT)
+#define K_MC_BANK3_MAP_DEFAULT	    0x0C
+#define V_MC_BANK3_MAP_DEFAULT	    V_MC_BANK3_MAP(K_MC_BANK3_MAP_DEFAULT)
 
-#define M_MC_RESERVED1              _SB_MAKEMASK(8, 32)
+#define M_MC_RESERVED1		    _SB_MAKEMASK(8, 32)
 
 #define S_MC_QUEUE_SIZE		    40
-#define M_MC_QUEUE_SIZE             _SB_MAKEMASK(4, S_MC_QUEUE_SIZE)
-#define V_MC_QUEUE_SIZE(x)          _SB_MAKEVALUE(x, S_MC_QUEUE_SIZE)
-#define G_MC_QUEUE_SIZE(x)          _SB_GETVALUE(x, S_MC_QUEUE_SIZE, M_MC_QUEUE_SIZE)
-#define V_MC_QUEUE_SIZE_DEFAULT     V_MC_QUEUE_SIZE(0x0A)
+#define M_MC_QUEUE_SIZE		    _SB_MAKEMASK(4, S_MC_QUEUE_SIZE)
+#define V_MC_QUEUE_SIZE(x)	    _SB_MAKEVALUE(x, S_MC_QUEUE_SIZE)
+#define G_MC_QUEUE_SIZE(x)	    _SB_GETVALUE(x, S_MC_QUEUE_SIZE, M_MC_QUEUE_SIZE)
+#define V_MC_QUEUE_SIZE_DEFAULT	    V_MC_QUEUE_SIZE(0x0A)
 
-#define S_MC_AGE_LIMIT              44
-#define M_MC_AGE_LIMIT              _SB_MAKEMASK(4, S_MC_AGE_LIMIT)
-#define V_MC_AGE_LIMIT(x)           _SB_MAKEVALUE(x, S_MC_AGE_LIMIT)
-#define G_MC_AGE_LIMIT(x)           _SB_GETVALUE(x, S_MC_AGE_LIMIT, M_MC_AGE_LIMIT)
-#define V_MC_AGE_LIMIT_DEFAULT      V_MC_AGE_LIMIT(8)
+#define S_MC_AGE_LIMIT		    44
+#define M_MC_AGE_LIMIT		    _SB_MAKEMASK(4, S_MC_AGE_LIMIT)
+#define V_MC_AGE_LIMIT(x)	    _SB_MAKEVALUE(x, S_MC_AGE_LIMIT)
+#define G_MC_AGE_LIMIT(x)	    _SB_GETVALUE(x, S_MC_AGE_LIMIT, M_MC_AGE_LIMIT)
+#define V_MC_AGE_LIMIT_DEFAULT	    V_MC_AGE_LIMIT(8)
 
-#define S_MC_WR_LIMIT               48
-#define M_MC_WR_LIMIT               _SB_MAKEMASK(4, S_MC_WR_LIMIT)
-#define V_MC_WR_LIMIT(x)            _SB_MAKEVALUE(x, S_MC_WR_LIMIT)
-#define G_MC_WR_LIMIT(x)            _SB_GETVALUE(x, S_MC_WR_LIMIT, M_MC_WR_LIMIT)
-#define V_MC_WR_LIMIT_DEFAULT       V_MC_WR_LIMIT(5)
+#define S_MC_WR_LIMIT		    48
+#define M_MC_WR_LIMIT		    _SB_MAKEMASK(4, S_MC_WR_LIMIT)
+#define V_MC_WR_LIMIT(x)	    _SB_MAKEVALUE(x, S_MC_WR_LIMIT)
+#define G_MC_WR_LIMIT(x)	    _SB_GETVALUE(x, S_MC_WR_LIMIT, M_MC_WR_LIMIT)
+#define V_MC_WR_LIMIT_DEFAULT	    V_MC_WR_LIMIT(5)
 
 #define M_MC_IOB1HIGHPRIORITY	    _SB_MAKEMASK1(52)
 
-#define M_MC_RESERVED2              _SB_MAKEMASK(3, 53)
+#define M_MC_RESERVED2		    _SB_MAKEMASK(3, 53)
 
-#define S_MC_CS_MODE                56
-#define M_MC_CS_MODE                _SB_MAKEMASK(4, S_MC_CS_MODE)
-#define V_MC_CS_MODE(x)             _SB_MAKEVALUE(x, S_MC_CS_MODE)
-#define G_MC_CS_MODE(x)             _SB_GETVALUE(x, S_MC_CS_MODE, M_MC_CS_MODE)
+#define S_MC_CS_MODE		    56
+#define M_MC_CS_MODE		    _SB_MAKEMASK(4, S_MC_CS_MODE)
+#define V_MC_CS_MODE(x)		    _SB_MAKEVALUE(x, S_MC_CS_MODE)
+#define G_MC_CS_MODE(x)		    _SB_GETVALUE(x, S_MC_CS_MODE, M_MC_CS_MODE)
 
-#define K_MC_CS_MODE_MSB_CS         0
-#define K_MC_CS_MODE_INTLV_CS       15
+#define K_MC_CS_MODE_MSB_CS	    0
+#define K_MC_CS_MODE_INTLV_CS	    15
 #define K_MC_CS_MODE_MIXED_CS_10    12
 #define K_MC_CS_MODE_MIXED_CS_30    6
 #define K_MC_CS_MODE_MIXED_CS_32    3
 
-#define V_MC_CS_MODE_MSB_CS         V_MC_CS_MODE(K_MC_CS_MODE_MSB_CS)
-#define V_MC_CS_MODE_INTLV_CS       V_MC_CS_MODE(K_MC_CS_MODE_INTLV_CS)
+#define V_MC_CS_MODE_MSB_CS	    V_MC_CS_MODE(K_MC_CS_MODE_MSB_CS)
+#define V_MC_CS_MODE_INTLV_CS	    V_MC_CS_MODE(K_MC_CS_MODE_INTLV_CS)
 #define V_MC_CS_MODE_MIXED_CS_10    V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_10)
 #define V_MC_CS_MODE_MIXED_CS_30    V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_30)
 #define V_MC_CS_MODE_MIXED_CS_32    V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_32)
 
-#define M_MC_ECC_DISABLE            _SB_MAKEMASK1(60)
-#define M_MC_BERR_DISABLE           _SB_MAKEMASK1(61)
-#define M_MC_FORCE_SEQ              _SB_MAKEMASK1(62)
-#define M_MC_DEBUG                  _SB_MAKEMASK1(63)
+#define M_MC_ECC_DISABLE	    _SB_MAKEMASK1(60)
+#define M_MC_BERR_DISABLE	    _SB_MAKEMASK1(61)
+#define M_MC_FORCE_SEQ		    _SB_MAKEMASK1(62)
+#define M_MC_DEBUG		    _SB_MAKEMASK1(63)
 
-#define V_MC_CONFIG_DEFAULT     V_MC_WR_LIMIT_DEFAULT | V_MC_AGE_LIMIT_DEFAULT | \
+#define V_MC_CONFIG_DEFAULT	V_MC_WR_LIMIT_DEFAULT | V_MC_AGE_LIMIT_DEFAULT | \
 				V_MC_BANK0_MAP_DEFAULT | V_MC_BANK1_MAP_DEFAULT | \
 				V_MC_BANK2_MAP_DEFAULT | V_MC_BANK3_MAP_DEFAULT | V_MC_CHANNEL_SEL(0) | \
-                                M_MC_IOB1HIGHPRIORITY | V_MC_QUEUE_SIZE_DEFAULT
+				M_MC_IOB1HIGHPRIORITY | V_MC_QUEUE_SIZE_DEFAULT
 
 
 /*
@@ -137,96 +137,96 @@
  * Note: this field has been updated to be consistent with the errata to 0.2
  */
 
-#define S_MC_CLK_RATIO              0
-#define M_MC_CLK_RATIO              _SB_MAKEMASK(4, S_MC_CLK_RATIO)
-#define V_MC_CLK_RATIO(x)           _SB_MAKEVALUE(x, S_MC_CLK_RATIO)
-#define G_MC_CLK_RATIO(x)           _SB_GETVALUE(x, S_MC_CLK_RATIO, M_MC_CLK_RATIO)
+#define S_MC_CLK_RATIO		    0
+#define M_MC_CLK_RATIO		    _SB_MAKEMASK(4, S_MC_CLK_RATIO)
+#define V_MC_CLK_RATIO(x)	    _SB_MAKEVALUE(x, S_MC_CLK_RATIO)
+#define G_MC_CLK_RATIO(x)	    _SB_GETVALUE(x, S_MC_CLK_RATIO, M_MC_CLK_RATIO)
 
-#define K_MC_CLK_RATIO_2X           4
-#define K_MC_CLK_RATIO_25X          5
-#define K_MC_CLK_RATIO_3X           6
-#define K_MC_CLK_RATIO_35X          7
-#define K_MC_CLK_RATIO_4X           8
+#define K_MC_CLK_RATIO_2X	    4
+#define K_MC_CLK_RATIO_25X	    5
+#define K_MC_CLK_RATIO_3X	    6
+#define K_MC_CLK_RATIO_35X	    7
+#define K_MC_CLK_RATIO_4X	    8
 #define K_MC_CLK_RATIO_45X	    9
 
 #define V_MC_CLK_RATIO_2X	    V_MC_CLK_RATIO(K_MC_CLK_RATIO_2X)
-#define V_MC_CLK_RATIO_25X          V_MC_CLK_RATIO(K_MC_CLK_RATIO_25X)
-#define V_MC_CLK_RATIO_3X           V_MC_CLK_RATIO(K_MC_CLK_RATIO_3X)
-#define V_MC_CLK_RATIO_35X          V_MC_CLK_RATIO(K_MC_CLK_RATIO_35X)
-#define V_MC_CLK_RATIO_4X           V_MC_CLK_RATIO(K_MC_CLK_RATIO_4X)
-#define V_MC_CLK_RATIO_45X          V_MC_CLK_RATIO(K_MC_CLK_RATIO_45X)
-#define V_MC_CLK_RATIO_DEFAULT      V_MC_CLK_RATIO_25X
+#define V_MC_CLK_RATIO_25X	    V_MC_CLK_RATIO(K_MC_CLK_RATIO_25X)
+#define V_MC_CLK_RATIO_3X	    V_MC_CLK_RATIO(K_MC_CLK_RATIO_3X)
+#define V_MC_CLK_RATIO_35X	    V_MC_CLK_RATIO(K_MC_CLK_RATIO_35X)
+#define V_MC_CLK_RATIO_4X	    V_MC_CLK_RATIO(K_MC_CLK_RATIO_4X)
+#define V_MC_CLK_RATIO_45X	    V_MC_CLK_RATIO(K_MC_CLK_RATIO_45X)
+#define V_MC_CLK_RATIO_DEFAULT	    V_MC_CLK_RATIO_25X
 
-#define S_MC_REF_RATE                8
-#define M_MC_REF_RATE                _SB_MAKEMASK(8, S_MC_REF_RATE)
-#define V_MC_REF_RATE(x)             _SB_MAKEVALUE(x, S_MC_REF_RATE)
-#define G_MC_REF_RATE(x)             _SB_GETVALUE(x, S_MC_REF_RATE, M_MC_REF_RATE)
+#define S_MC_REF_RATE		     8
+#define M_MC_REF_RATE		     _SB_MAKEMASK(8, S_MC_REF_RATE)
+#define V_MC_REF_RATE(x)	     _SB_MAKEVALUE(x, S_MC_REF_RATE)
+#define G_MC_REF_RATE(x)	     _SB_GETVALUE(x, S_MC_REF_RATE, M_MC_REF_RATE)
 
-#define K_MC_REF_RATE_100MHz         0x62
-#define K_MC_REF_RATE_133MHz         0x81
-#define K_MC_REF_RATE_200MHz         0xC4
+#define K_MC_REF_RATE_100MHz	     0x62
+#define K_MC_REF_RATE_133MHz	     0x81
+#define K_MC_REF_RATE_200MHz	     0xC4
 
-#define V_MC_REF_RATE_100MHz         V_MC_REF_RATE(K_MC_REF_RATE_100MHz)
-#define V_MC_REF_RATE_133MHz         V_MC_REF_RATE(K_MC_REF_RATE_133MHz)
-#define V_MC_REF_RATE_200MHz         V_MC_REF_RATE(K_MC_REF_RATE_200MHz)
-#define V_MC_REF_RATE_DEFAULT        V_MC_REF_RATE_100MHz
+#define V_MC_REF_RATE_100MHz	     V_MC_REF_RATE(K_MC_REF_RATE_100MHz)
+#define V_MC_REF_RATE_133MHz	     V_MC_REF_RATE(K_MC_REF_RATE_133MHz)
+#define V_MC_REF_RATE_200MHz	     V_MC_REF_RATE(K_MC_REF_RATE_200MHz)
+#define V_MC_REF_RATE_DEFAULT	     V_MC_REF_RATE_100MHz
 
-#define S_MC_CLOCK_DRIVE             16
-#define M_MC_CLOCK_DRIVE             _SB_MAKEMASK(4, S_MC_CLOCK_DRIVE)
-#define V_MC_CLOCK_DRIVE(x)          _SB_MAKEVALUE(x, S_MC_CLOCK_DRIVE)
-#define G_MC_CLOCK_DRIVE(x)          _SB_GETVALUE(x, S_MC_CLOCK_DRIVE, M_MC_CLOCK_DRIVE)
+#define S_MC_CLOCK_DRIVE	     16
+#define M_MC_CLOCK_DRIVE	     _SB_MAKEMASK(4, S_MC_CLOCK_DRIVE)
+#define V_MC_CLOCK_DRIVE(x)	     _SB_MAKEVALUE(x, S_MC_CLOCK_DRIVE)
+#define G_MC_CLOCK_DRIVE(x)	     _SB_GETVALUE(x, S_MC_CLOCK_DRIVE, M_MC_CLOCK_DRIVE)
 #define V_MC_CLOCK_DRIVE_DEFAULT     V_MC_CLOCK_DRIVE(0xF)
 
-#define S_MC_DATA_DRIVE              20
-#define M_MC_DATA_DRIVE              _SB_MAKEMASK(4, S_MC_DATA_DRIVE)
-#define V_MC_DATA_DRIVE(x)           _SB_MAKEVALUE(x, S_MC_DATA_DRIVE)
-#define G_MC_DATA_DRIVE(x)           _SB_GETVALUE(x, S_MC_DATA_DRIVE, M_MC_DATA_DRIVE)
-#define V_MC_DATA_DRIVE_DEFAULT      V_MC_DATA_DRIVE(0x0)
+#define S_MC_DATA_DRIVE		     20
+#define M_MC_DATA_DRIVE		     _SB_MAKEMASK(4, S_MC_DATA_DRIVE)
+#define V_MC_DATA_DRIVE(x)	     _SB_MAKEVALUE(x, S_MC_DATA_DRIVE)
+#define G_MC_DATA_DRIVE(x)	     _SB_GETVALUE(x, S_MC_DATA_DRIVE, M_MC_DATA_DRIVE)
+#define V_MC_DATA_DRIVE_DEFAULT	     V_MC_DATA_DRIVE(0x0)
 
-#define S_MC_ADDR_DRIVE              24
-#define M_MC_ADDR_DRIVE              _SB_MAKEMASK(4, S_MC_ADDR_DRIVE)
-#define V_MC_ADDR_DRIVE(x)           _SB_MAKEVALUE(x, S_MC_ADDR_DRIVE)
-#define G_MC_ADDR_DRIVE(x)           _SB_GETVALUE(x, S_MC_ADDR_DRIVE, M_MC_ADDR_DRIVE)
-#define V_MC_ADDR_DRIVE_DEFAULT      V_MC_ADDR_DRIVE(0x0)
+#define S_MC_ADDR_DRIVE		     24
+#define M_MC_ADDR_DRIVE		     _SB_MAKEMASK(4, S_MC_ADDR_DRIVE)
+#define V_MC_ADDR_DRIVE(x)	     _SB_MAKEVALUE(x, S_MC_ADDR_DRIVE)
+#define G_MC_ADDR_DRIVE(x)	     _SB_GETVALUE(x, S_MC_ADDR_DRIVE, M_MC_ADDR_DRIVE)
+#define V_MC_ADDR_DRIVE_DEFAULT	     V_MC_ADDR_DRIVE(0x0)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
-#define M_MC_REF_DISABLE             _SB_MAKEMASK1(30)
+#define M_MC_REF_DISABLE	     _SB_MAKEMASK1(30)
 #endif /* 1250 PASS3 || 112x PASS1 */
 
-#define M_MC_DLL_BYPASS              _SB_MAKEMASK1(31)
+#define M_MC_DLL_BYPASS		     _SB_MAKEMASK1(31)
 
-#define S_MC_DQI_SKEW               32
-#define M_MC_DQI_SKEW               _SB_MAKEMASK(8, S_MC_DQI_SKEW)
-#define V_MC_DQI_SKEW(x)            _SB_MAKEVALUE(x, S_MC_DQI_SKEW)
-#define G_MC_DQI_SKEW(x)            _SB_GETVALUE(x, S_MC_DQI_SKEW, M_MC_DQI_SKEW)
-#define V_MC_DQI_SKEW_DEFAULT       V_MC_DQI_SKEW(0)
+#define S_MC_DQI_SKEW		    32
+#define M_MC_DQI_SKEW		    _SB_MAKEMASK(8, S_MC_DQI_SKEW)
+#define V_MC_DQI_SKEW(x)	    _SB_MAKEVALUE(x, S_MC_DQI_SKEW)
+#define G_MC_DQI_SKEW(x)	    _SB_GETVALUE(x, S_MC_DQI_SKEW, M_MC_DQI_SKEW)
+#define V_MC_DQI_SKEW_DEFAULT	    V_MC_DQI_SKEW(0)
 
-#define S_MC_DQO_SKEW               40
-#define M_MC_DQO_SKEW               _SB_MAKEMASK(8, S_MC_DQO_SKEW)
-#define V_MC_DQO_SKEW(x)            _SB_MAKEVALUE(x, S_MC_DQO_SKEW)
-#define G_MC_DQO_SKEW(x)            _SB_GETVALUE(x, S_MC_DQO_SKEW, M_MC_DQO_SKEW)
-#define V_MC_DQO_SKEW_DEFAULT       V_MC_DQO_SKEW(0)
+#define S_MC_DQO_SKEW		    40
+#define M_MC_DQO_SKEW		    _SB_MAKEMASK(8, S_MC_DQO_SKEW)
+#define V_MC_DQO_SKEW(x)	    _SB_MAKEVALUE(x, S_MC_DQO_SKEW)
+#define G_MC_DQO_SKEW(x)	    _SB_GETVALUE(x, S_MC_DQO_SKEW, M_MC_DQO_SKEW)
+#define V_MC_DQO_SKEW_DEFAULT	    V_MC_DQO_SKEW(0)
 
-#define S_MC_ADDR_SKEW               48
-#define M_MC_ADDR_SKEW               _SB_MAKEMASK(8, S_MC_ADDR_SKEW)
-#define V_MC_ADDR_SKEW(x)            _SB_MAKEVALUE(x, S_MC_ADDR_SKEW)
-#define G_MC_ADDR_SKEW(x)            _SB_GETVALUE(x, S_MC_ADDR_SKEW, M_MC_ADDR_SKEW)
-#define V_MC_ADDR_SKEW_DEFAULT       V_MC_ADDR_SKEW(0x0F)
+#define S_MC_ADDR_SKEW		     48
+#define M_MC_ADDR_SKEW		     _SB_MAKEMASK(8, S_MC_ADDR_SKEW)
+#define V_MC_ADDR_SKEW(x)	     _SB_MAKEVALUE(x, S_MC_ADDR_SKEW)
+#define G_MC_ADDR_SKEW(x)	     _SB_GETVALUE(x, S_MC_ADDR_SKEW, M_MC_ADDR_SKEW)
+#define V_MC_ADDR_SKEW_DEFAULT	     V_MC_ADDR_SKEW(0x0F)
 
-#define S_MC_DLL_DEFAULT             56
-#define M_MC_DLL_DEFAULT             _SB_MAKEMASK(8, S_MC_DLL_DEFAULT)
-#define V_MC_DLL_DEFAULT(x)          _SB_MAKEVALUE(x, S_MC_DLL_DEFAULT)
-#define G_MC_DLL_DEFAULT(x)          _SB_GETVALUE(x, S_MC_DLL_DEFAULT, M_MC_DLL_DEFAULT)
+#define S_MC_DLL_DEFAULT	     56
+#define M_MC_DLL_DEFAULT	     _SB_MAKEMASK(8, S_MC_DLL_DEFAULT)
+#define V_MC_DLL_DEFAULT(x)	     _SB_MAKEVALUE(x, S_MC_DLL_DEFAULT)
+#define G_MC_DLL_DEFAULT(x)	     _SB_GETVALUE(x, S_MC_DLL_DEFAULT, M_MC_DLL_DEFAULT)
 #define V_MC_DLL_DEFAULT_DEFAULT     V_MC_DLL_DEFAULT(0x10)
 
-#define V_MC_CLKCONFIG_DEFAULT       V_MC_DLL_DEFAULT_DEFAULT |  \
-                                     V_MC_ADDR_SKEW_DEFAULT | \
-                                     V_MC_DQO_SKEW_DEFAULT | \
-                                     V_MC_DQI_SKEW_DEFAULT | \
-                                     V_MC_ADDR_DRIVE_DEFAULT | \
-                                     V_MC_DATA_DRIVE_DEFAULT | \
-                                     V_MC_CLOCK_DRIVE_DEFAULT | \
-                                     V_MC_REF_RATE_DEFAULT
+#define V_MC_CLKCONFIG_DEFAULT	     V_MC_DLL_DEFAULT_DEFAULT |	 \
+				     V_MC_ADDR_SKEW_DEFAULT | \
+				     V_MC_DQO_SKEW_DEFAULT | \
+				     V_MC_DQI_SKEW_DEFAULT | \
+				     V_MC_ADDR_DRIVE_DEFAULT | \
+				     V_MC_DATA_DRIVE_DEFAULT | \
+				     V_MC_CLOCK_DRIVE_DEFAULT | \
+				     V_MC_REF_RATE_DEFAULT
 
 
 
@@ -234,68 +234,68 @@
  * DRAM Command Register (Table 6-13)
  */
 
-#define S_MC_COMMAND                0
-#define M_MC_COMMAND                _SB_MAKEMASK(4, S_MC_COMMAND)
-#define V_MC_COMMAND(x)             _SB_MAKEVALUE(x, S_MC_COMMAND)
-#define G_MC_COMMAND(x)             _SB_GETVALUE(x, S_MC_COMMAND, M_MC_COMMAND)
+#define S_MC_COMMAND		    0
+#define M_MC_COMMAND		    _SB_MAKEMASK(4, S_MC_COMMAND)
+#define V_MC_COMMAND(x)		    _SB_MAKEVALUE(x, S_MC_COMMAND)
+#define G_MC_COMMAND(x)		    _SB_GETVALUE(x, S_MC_COMMAND, M_MC_COMMAND)
 
-#define K_MC_COMMAND_EMRS           0
-#define K_MC_COMMAND_MRS            1
-#define K_MC_COMMAND_PRE            2
-#define K_MC_COMMAND_AR             3
-#define K_MC_COMMAND_SETRFSH        4
-#define K_MC_COMMAND_CLRRFSH        5
-#define K_MC_COMMAND_SETPWRDN       6
-#define K_MC_COMMAND_CLRPWRDN       7
+#define K_MC_COMMAND_EMRS	    0
+#define K_MC_COMMAND_MRS	    1
+#define K_MC_COMMAND_PRE	    2
+#define K_MC_COMMAND_AR		    3
+#define K_MC_COMMAND_SETRFSH	    4
+#define K_MC_COMMAND_CLRRFSH	    5
+#define K_MC_COMMAND_SETPWRDN	    6
+#define K_MC_COMMAND_CLRPWRDN	    7
 
-#define V_MC_COMMAND_EMRS           V_MC_COMMAND(K_MC_COMMAND_EMRS)
-#define V_MC_COMMAND_MRS            V_MC_COMMAND(K_MC_COMMAND_MRS)
-#define V_MC_COMMAND_PRE            V_MC_COMMAND(K_MC_COMMAND_PRE)
-#define V_MC_COMMAND_AR             V_MC_COMMAND(K_MC_COMMAND_AR)
-#define V_MC_COMMAND_SETRFSH        V_MC_COMMAND(K_MC_COMMAND_SETRFSH)
-#define V_MC_COMMAND_CLRRFSH        V_MC_COMMAND(K_MC_COMMAND_CLRRFSH)
-#define V_MC_COMMAND_SETPWRDN       V_MC_COMMAND(K_MC_COMMAND_SETPWRDN)
-#define V_MC_COMMAND_CLRPWRDN       V_MC_COMMAND(K_MC_COMMAND_CLRPWRDN)
+#define V_MC_COMMAND_EMRS	    V_MC_COMMAND(K_MC_COMMAND_EMRS)
+#define V_MC_COMMAND_MRS	    V_MC_COMMAND(K_MC_COMMAND_MRS)
+#define V_MC_COMMAND_PRE	    V_MC_COMMAND(K_MC_COMMAND_PRE)
+#define V_MC_COMMAND_AR		    V_MC_COMMAND(K_MC_COMMAND_AR)
+#define V_MC_COMMAND_SETRFSH	    V_MC_COMMAND(K_MC_COMMAND_SETRFSH)
+#define V_MC_COMMAND_CLRRFSH	    V_MC_COMMAND(K_MC_COMMAND_CLRRFSH)
+#define V_MC_COMMAND_SETPWRDN	    V_MC_COMMAND(K_MC_COMMAND_SETPWRDN)
+#define V_MC_COMMAND_CLRPWRDN	    V_MC_COMMAND(K_MC_COMMAND_CLRPWRDN)
 
-#define M_MC_CS0                    _SB_MAKEMASK1(4)
-#define M_MC_CS1                    _SB_MAKEMASK1(5)
-#define M_MC_CS2                    _SB_MAKEMASK1(6)
-#define M_MC_CS3                    _SB_MAKEMASK1(7)
+#define M_MC_CS0		    _SB_MAKEMASK1(4)
+#define M_MC_CS1		    _SB_MAKEMASK1(5)
+#define M_MC_CS2		    _SB_MAKEMASK1(6)
+#define M_MC_CS3		    _SB_MAKEMASK1(7)
 
 /*
  * DRAM Mode Register (Table 6-14)
  */
 
-#define S_MC_EMODE                  0
-#define M_MC_EMODE                  _SB_MAKEMASK(15, S_MC_EMODE)
-#define V_MC_EMODE(x)               _SB_MAKEVALUE(x, S_MC_EMODE)
-#define G_MC_EMODE(x)               _SB_GETVALUE(x, S_MC_EMODE, M_MC_EMODE)
-#define V_MC_EMODE_DEFAULT          V_MC_EMODE(0)
+#define S_MC_EMODE		    0
+#define M_MC_EMODE		    _SB_MAKEMASK(15, S_MC_EMODE)
+#define V_MC_EMODE(x)		    _SB_MAKEVALUE(x, S_MC_EMODE)
+#define G_MC_EMODE(x)		    _SB_GETVALUE(x, S_MC_EMODE, M_MC_EMODE)
+#define V_MC_EMODE_DEFAULT	    V_MC_EMODE(0)
 
-#define S_MC_MODE                   16
-#define M_MC_MODE                   _SB_MAKEMASK(15, S_MC_MODE)
-#define V_MC_MODE(x)                _SB_MAKEVALUE(x, S_MC_MODE)
-#define G_MC_MODE(x)                _SB_GETVALUE(x, S_MC_MODE, M_MC_MODE)
-#define V_MC_MODE_DEFAULT           V_MC_MODE(0x22)
+#define S_MC_MODE		    16
+#define M_MC_MODE		    _SB_MAKEMASK(15, S_MC_MODE)
+#define V_MC_MODE(x)		    _SB_MAKEVALUE(x, S_MC_MODE)
+#define G_MC_MODE(x)		    _SB_GETVALUE(x, S_MC_MODE, M_MC_MODE)
+#define V_MC_MODE_DEFAULT	    V_MC_MODE(0x22)
 
-#define S_MC_DRAM_TYPE              32
-#define M_MC_DRAM_TYPE              _SB_MAKEMASK(3, S_MC_DRAM_TYPE)
-#define V_MC_DRAM_TYPE(x)           _SB_MAKEVALUE(x, S_MC_DRAM_TYPE)
-#define G_MC_DRAM_TYPE(x)           _SB_GETVALUE(x, S_MC_DRAM_TYPE, M_MC_DRAM_TYPE)
+#define S_MC_DRAM_TYPE		    32
+#define M_MC_DRAM_TYPE		    _SB_MAKEMASK(3, S_MC_DRAM_TYPE)
+#define V_MC_DRAM_TYPE(x)	    _SB_MAKEVALUE(x, S_MC_DRAM_TYPE)
+#define G_MC_DRAM_TYPE(x)	    _SB_GETVALUE(x, S_MC_DRAM_TYPE, M_MC_DRAM_TYPE)
 
-#define K_MC_DRAM_TYPE_JEDEC        0
-#define K_MC_DRAM_TYPE_FCRAM        1
+#define K_MC_DRAM_TYPE_JEDEC	    0
+#define K_MC_DRAM_TYPE_FCRAM	    1
 #define K_MC_DRAM_TYPE_SGRAM	    2
 
-#define V_MC_DRAM_TYPE_JEDEC        V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_JEDEC)
-#define V_MC_DRAM_TYPE_FCRAM        V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_FCRAM)
-#define V_MC_DRAM_TYPE_SGRAM        V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_SGRAM)
+#define V_MC_DRAM_TYPE_JEDEC	    V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_JEDEC)
+#define V_MC_DRAM_TYPE_FCRAM	    V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_FCRAM)
+#define V_MC_DRAM_TYPE_SGRAM	    V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_SGRAM)
 
 #define M_MC_EXTERNALDECODE	    _SB_MAKEMASK1(35)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
-#define M_MC_PRE_ON_A8              _SB_MAKEMASK1(36)
-#define M_MC_RAM_WITH_A13           _SB_MAKEMASK1(37)
+#define M_MC_PRE_ON_A8		    _SB_MAKEMASK1(36)
+#define M_MC_RAM_WITH_A13	    _SB_MAKEMASK1(37)
 #endif /* 1250 PASS3 || 112x PASS1 */
 
 
@@ -308,99 +308,99 @@
 #define M_MC_r2wIDLE_TWOCYCLES	  _SB_MAKEMASK1(61)
 #define M_MC_r2rIDLE_TWOCYCLES	  _SB_MAKEMASK1(62)
 
-#define S_MC_tFIFO                56
-#define M_MC_tFIFO                _SB_MAKEMASK(4, S_MC_tFIFO)
-#define V_MC_tFIFO(x)             _SB_MAKEVALUE(x, S_MC_tFIFO)
-#define G_MC_tFIFO(x)             _SB_GETVALUE(x, S_MC_tFIFO, M_MC_tFIFO)
-#define K_MC_tFIFO_DEFAULT        1
-#define V_MC_tFIFO_DEFAULT        V_MC_tFIFO(K_MC_tFIFO_DEFAULT)
+#define S_MC_tFIFO		  56
+#define M_MC_tFIFO		  _SB_MAKEMASK(4, S_MC_tFIFO)
+#define V_MC_tFIFO(x)		  _SB_MAKEVALUE(x, S_MC_tFIFO)
+#define G_MC_tFIFO(x)		  _SB_GETVALUE(x, S_MC_tFIFO, M_MC_tFIFO)
+#define K_MC_tFIFO_DEFAULT	  1
+#define V_MC_tFIFO_DEFAULT	  V_MC_tFIFO(K_MC_tFIFO_DEFAULT)
 
-#define S_MC_tRFC                 52
-#define M_MC_tRFC                 _SB_MAKEMASK(4, S_MC_tRFC)
-#define V_MC_tRFC(x)              _SB_MAKEVALUE(x, S_MC_tRFC)
-#define G_MC_tRFC(x)              _SB_GETVALUE(x, S_MC_tRFC, M_MC_tRFC)
-#define K_MC_tRFC_DEFAULT         12
-#define V_MC_tRFC_DEFAULT         V_MC_tRFC(K_MC_tRFC_DEFAULT)
+#define S_MC_tRFC		  52
+#define M_MC_tRFC		  _SB_MAKEMASK(4, S_MC_tRFC)
+#define V_MC_tRFC(x)		  _SB_MAKEVALUE(x, S_MC_tRFC)
+#define G_MC_tRFC(x)		  _SB_GETVALUE(x, S_MC_tRFC, M_MC_tRFC)
+#define K_MC_tRFC_DEFAULT	  12
+#define V_MC_tRFC_DEFAULT	  V_MC_tRFC(K_MC_tRFC_DEFAULT)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3)
-#define M_MC_tRFC_PLUS16          _SB_MAKEMASK1(51)	/* 1250C3 and later.  */
+#define M_MC_tRFC_PLUS16	  _SB_MAKEMASK1(51)	/* 1250C3 and later.  */
 #endif
 
-#define S_MC_tCwCr                40
-#define M_MC_tCwCr                _SB_MAKEMASK(4, S_MC_tCwCr)
-#define V_MC_tCwCr(x)             _SB_MAKEVALUE(x, S_MC_tCwCr)
-#define G_MC_tCwCr(x)             _SB_GETVALUE(x, S_MC_tCwCr, M_MC_tCwCr)
-#define K_MC_tCwCr_DEFAULT        4
-#define V_MC_tCwCr_DEFAULT        V_MC_tCwCr(K_MC_tCwCr_DEFAULT)
+#define S_MC_tCwCr		  40
+#define M_MC_tCwCr		  _SB_MAKEMASK(4, S_MC_tCwCr)
+#define V_MC_tCwCr(x)		  _SB_MAKEVALUE(x, S_MC_tCwCr)
+#define G_MC_tCwCr(x)		  _SB_GETVALUE(x, S_MC_tCwCr, M_MC_tCwCr)
+#define K_MC_tCwCr_DEFAULT	  4
+#define V_MC_tCwCr_DEFAULT	  V_MC_tCwCr(K_MC_tCwCr_DEFAULT)
 
-#define S_MC_tRCr                 28
-#define M_MC_tRCr                 _SB_MAKEMASK(4, S_MC_tRCr)
-#define V_MC_tRCr(x)              _SB_MAKEVALUE(x, S_MC_tRCr)
-#define G_MC_tRCr(x)              _SB_GETVALUE(x, S_MC_tRCr, M_MC_tRCr)
-#define K_MC_tRCr_DEFAULT         9
-#define V_MC_tRCr_DEFAULT         V_MC_tRCr(K_MC_tRCr_DEFAULT)
+#define S_MC_tRCr		  28
+#define M_MC_tRCr		  _SB_MAKEMASK(4, S_MC_tRCr)
+#define V_MC_tRCr(x)		  _SB_MAKEVALUE(x, S_MC_tRCr)
+#define G_MC_tRCr(x)		  _SB_GETVALUE(x, S_MC_tRCr, M_MC_tRCr)
+#define K_MC_tRCr_DEFAULT	  9
+#define V_MC_tRCr_DEFAULT	  V_MC_tRCr(K_MC_tRCr_DEFAULT)
 
-#define S_MC_tRCw                 24
-#define M_MC_tRCw                 _SB_MAKEMASK(4, S_MC_tRCw)
-#define V_MC_tRCw(x)              _SB_MAKEVALUE(x, S_MC_tRCw)
-#define G_MC_tRCw(x)              _SB_GETVALUE(x, S_MC_tRCw, M_MC_tRCw)
-#define K_MC_tRCw_DEFAULT         10
-#define V_MC_tRCw_DEFAULT         V_MC_tRCw(K_MC_tRCw_DEFAULT)
+#define S_MC_tRCw		  24
+#define M_MC_tRCw		  _SB_MAKEMASK(4, S_MC_tRCw)
+#define V_MC_tRCw(x)		  _SB_MAKEVALUE(x, S_MC_tRCw)
+#define G_MC_tRCw(x)		  _SB_GETVALUE(x, S_MC_tRCw, M_MC_tRCw)
+#define K_MC_tRCw_DEFAULT	  10
+#define V_MC_tRCw_DEFAULT	  V_MC_tRCw(K_MC_tRCw_DEFAULT)
 
-#define S_MC_tRRD                 20
-#define M_MC_tRRD                 _SB_MAKEMASK(4, S_MC_tRRD)
-#define V_MC_tRRD(x)              _SB_MAKEVALUE(x, S_MC_tRRD)
-#define G_MC_tRRD(x)              _SB_GETVALUE(x, S_MC_tRRD, M_MC_tRRD)
-#define K_MC_tRRD_DEFAULT         2
-#define V_MC_tRRD_DEFAULT         V_MC_tRRD(K_MC_tRRD_DEFAULT)
+#define S_MC_tRRD		  20
+#define M_MC_tRRD		  _SB_MAKEMASK(4, S_MC_tRRD)
+#define V_MC_tRRD(x)		  _SB_MAKEVALUE(x, S_MC_tRRD)
+#define G_MC_tRRD(x)		  _SB_GETVALUE(x, S_MC_tRRD, M_MC_tRRD)
+#define K_MC_tRRD_DEFAULT	  2
+#define V_MC_tRRD_DEFAULT	  V_MC_tRRD(K_MC_tRRD_DEFAULT)
 
-#define S_MC_tRP                  16
-#define M_MC_tRP                  _SB_MAKEMASK(4, S_MC_tRP)
-#define V_MC_tRP(x)               _SB_MAKEVALUE(x, S_MC_tRP)
-#define G_MC_tRP(x)               _SB_GETVALUE(x, S_MC_tRP, M_MC_tRP)
-#define K_MC_tRP_DEFAULT          4
-#define V_MC_tRP_DEFAULT          V_MC_tRP(K_MC_tRP_DEFAULT)
+#define S_MC_tRP		  16
+#define M_MC_tRP		  _SB_MAKEMASK(4, S_MC_tRP)
+#define V_MC_tRP(x)		  _SB_MAKEVALUE(x, S_MC_tRP)
+#define G_MC_tRP(x)		  _SB_GETVALUE(x, S_MC_tRP, M_MC_tRP)
+#define K_MC_tRP_DEFAULT	  4
+#define V_MC_tRP_DEFAULT	  V_MC_tRP(K_MC_tRP_DEFAULT)
 
-#define S_MC_tCwD                 8
-#define M_MC_tCwD                 _SB_MAKEMASK(4, S_MC_tCwD)
-#define V_MC_tCwD(x)              _SB_MAKEVALUE(x, S_MC_tCwD)
-#define G_MC_tCwD(x)              _SB_GETVALUE(x, S_MC_tCwD, M_MC_tCwD)
-#define K_MC_tCwD_DEFAULT         1
-#define V_MC_tCwD_DEFAULT         V_MC_tCwD(K_MC_tCwD_DEFAULT)
+#define S_MC_tCwD		  8
+#define M_MC_tCwD		  _SB_MAKEMASK(4, S_MC_tCwD)
+#define V_MC_tCwD(x)		  _SB_MAKEVALUE(x, S_MC_tCwD)
+#define G_MC_tCwD(x)		  _SB_GETVALUE(x, S_MC_tCwD, M_MC_tCwD)
+#define K_MC_tCwD_DEFAULT	  1
+#define V_MC_tCwD_DEFAULT	  V_MC_tCwD(K_MC_tCwD_DEFAULT)
 
-#define M_tCrDh                   _SB_MAKEMASK1(7)
+#define M_tCrDh			  _SB_MAKEMASK1(7)
 #define M_MC_tCrDh		  M_tCrDh
 
-#define S_MC_tCrD                 4
-#define M_MC_tCrD                 _SB_MAKEMASK(3, S_MC_tCrD)
-#define V_MC_tCrD(x)              _SB_MAKEVALUE(x, S_MC_tCrD)
-#define G_MC_tCrD(x)              _SB_GETVALUE(x, S_MC_tCrD, M_MC_tCrD)
-#define K_MC_tCrD_DEFAULT         2
-#define V_MC_tCrD_DEFAULT         V_MC_tCrD(K_MC_tCrD_DEFAULT)
+#define S_MC_tCrD		  4
+#define M_MC_tCrD		  _SB_MAKEMASK(3, S_MC_tCrD)
+#define V_MC_tCrD(x)		  _SB_MAKEVALUE(x, S_MC_tCrD)
+#define G_MC_tCrD(x)		  _SB_GETVALUE(x, S_MC_tCrD, M_MC_tCrD)
+#define K_MC_tCrD_DEFAULT	  2
+#define V_MC_tCrD_DEFAULT	  V_MC_tCrD(K_MC_tCrD_DEFAULT)
 
-#define S_MC_tRCD                 0
-#define M_MC_tRCD                 _SB_MAKEMASK(4, S_MC_tRCD)
-#define V_MC_tRCD(x)              _SB_MAKEVALUE(x, S_MC_tRCD)
-#define G_MC_tRCD(x)              _SB_GETVALUE(x, S_MC_tRCD, M_MC_tRCD)
-#define K_MC_tRCD_DEFAULT         3
-#define V_MC_tRCD_DEFAULT         V_MC_tRCD(K_MC_tRCD_DEFAULT)
+#define S_MC_tRCD		  0
+#define M_MC_tRCD		  _SB_MAKEMASK(4, S_MC_tRCD)
+#define V_MC_tRCD(x)		  _SB_MAKEVALUE(x, S_MC_tRCD)
+#define G_MC_tRCD(x)		  _SB_GETVALUE(x, S_MC_tRCD, M_MC_tRCD)
+#define K_MC_tRCD_DEFAULT	  3
+#define V_MC_tRCD_DEFAULT	  V_MC_tRCD(K_MC_tRCD_DEFAULT)
 
-#define V_MC_TIMING_DEFAULT     V_MC_tFIFO(K_MC_tFIFO_DEFAULT) | \
-                                V_MC_tRFC(K_MC_tRFC_DEFAULT) | \
-                                V_MC_tCwCr(K_MC_tCwCr_DEFAULT) | \
-                                V_MC_tRCr(K_MC_tRCr_DEFAULT) | \
-                                V_MC_tRCw(K_MC_tRCw_DEFAULT) | \
-                                V_MC_tRRD(K_MC_tRRD_DEFAULT) | \
-                                V_MC_tRP(K_MC_tRP_DEFAULT) | \
-                                V_MC_tCwD(K_MC_tCwD_DEFAULT) | \
-                                V_MC_tCrD(K_MC_tCrD_DEFAULT) | \
-                                V_MC_tRCD(K_MC_tRCD_DEFAULT) | \
-                                M_MC_r2rIDLE_TWOCYCLES
+#define V_MC_TIMING_DEFAULT	V_MC_tFIFO(K_MC_tFIFO_DEFAULT) | \
+				V_MC_tRFC(K_MC_tRFC_DEFAULT) | \
+				V_MC_tCwCr(K_MC_tCwCr_DEFAULT) | \
+				V_MC_tRCr(K_MC_tRCr_DEFAULT) | \
+				V_MC_tRCw(K_MC_tRCw_DEFAULT) | \
+				V_MC_tRRD(K_MC_tRRD_DEFAULT) | \
+				V_MC_tRP(K_MC_tRP_DEFAULT) | \
+				V_MC_tCwD(K_MC_tCwD_DEFAULT) | \
+				V_MC_tCrD(K_MC_tCrD_DEFAULT) | \
+				V_MC_tRCD(K_MC_tRCD_DEFAULT) | \
+				M_MC_r2rIDLE_TWOCYCLES
 
 /*
  * Errata says these are not the default
- *                               M_MC_w2rIDLE_TWOCYCLES | \
- *                               M_MC_r2wIDLE_TWOCYCLES | \
+ *				 M_MC_w2rIDLE_TWOCYCLES | \
+ *				 M_MC_r2wIDLE_TWOCYCLES | \
  */
 
 
@@ -408,143 +408,143 @@
  * Chip Select Start Address Register (Table 6-17)
  */
 
-#define S_MC_CS0_START              0
-#define M_MC_CS0_START              _SB_MAKEMASK(16, S_MC_CS0_START)
-#define V_MC_CS0_START(x)           _SB_MAKEVALUE(x, S_MC_CS0_START)
-#define G_MC_CS0_START(x)           _SB_GETVALUE(x, S_MC_CS0_START, M_MC_CS0_START)
+#define S_MC_CS0_START		    0
+#define M_MC_CS0_START		    _SB_MAKEMASK(16, S_MC_CS0_START)
+#define V_MC_CS0_START(x)	    _SB_MAKEVALUE(x, S_MC_CS0_START)
+#define G_MC_CS0_START(x)	    _SB_GETVALUE(x, S_MC_CS0_START, M_MC_CS0_START)
 
-#define S_MC_CS1_START              16
-#define M_MC_CS1_START              _SB_MAKEMASK(16, S_MC_CS1_START)
-#define V_MC_CS1_START(x)           _SB_MAKEVALUE(x, S_MC_CS1_START)
-#define G_MC_CS1_START(x)           _SB_GETVALUE(x, S_MC_CS1_START, M_MC_CS1_START)
+#define S_MC_CS1_START		    16
+#define M_MC_CS1_START		    _SB_MAKEMASK(16, S_MC_CS1_START)
+#define V_MC_CS1_START(x)	    _SB_MAKEVALUE(x, S_MC_CS1_START)
+#define G_MC_CS1_START(x)	    _SB_GETVALUE(x, S_MC_CS1_START, M_MC_CS1_START)
 
-#define S_MC_CS2_START              32
-#define M_MC_CS2_START              _SB_MAKEMASK(16, S_MC_CS2_START)
-#define V_MC_CS2_START(x)           _SB_MAKEVALUE(x, S_MC_CS2_START)
-#define G_MC_CS2_START(x)           _SB_GETVALUE(x, S_MC_CS2_START, M_MC_CS2_START)
+#define S_MC_CS2_START		    32
+#define M_MC_CS2_START		    _SB_MAKEMASK(16, S_MC_CS2_START)
+#define V_MC_CS2_START(x)	    _SB_MAKEVALUE(x, S_MC_CS2_START)
+#define G_MC_CS2_START(x)	    _SB_GETVALUE(x, S_MC_CS2_START, M_MC_CS2_START)
 
-#define S_MC_CS3_START              48
-#define M_MC_CS3_START              _SB_MAKEMASK(16, S_MC_CS3_START)
-#define V_MC_CS3_START(x)           _SB_MAKEVALUE(x, S_MC_CS3_START)
-#define G_MC_CS3_START(x)           _SB_GETVALUE(x, S_MC_CS3_START, M_MC_CS3_START)
+#define S_MC_CS3_START		    48
+#define M_MC_CS3_START		    _SB_MAKEMASK(16, S_MC_CS3_START)
+#define V_MC_CS3_START(x)	    _SB_MAKEVALUE(x, S_MC_CS3_START)
+#define G_MC_CS3_START(x)	    _SB_GETVALUE(x, S_MC_CS3_START, M_MC_CS3_START)
 
 /*
  * Chip Select End Address Register (Table 6-18)
  */
 
-#define S_MC_CS0_END                0
-#define M_MC_CS0_END                _SB_MAKEMASK(16, S_MC_CS0_END)
-#define V_MC_CS0_END(x)             _SB_MAKEVALUE(x, S_MC_CS0_END)
-#define G_MC_CS0_END(x)             _SB_GETVALUE(x, S_MC_CS0_END, M_MC_CS0_END)
+#define S_MC_CS0_END		    0
+#define M_MC_CS0_END		    _SB_MAKEMASK(16, S_MC_CS0_END)
+#define V_MC_CS0_END(x)		    _SB_MAKEVALUE(x, S_MC_CS0_END)
+#define G_MC_CS0_END(x)		    _SB_GETVALUE(x, S_MC_CS0_END, M_MC_CS0_END)
 
-#define S_MC_CS1_END                16
-#define M_MC_CS1_END                _SB_MAKEMASK(16, S_MC_CS1_END)
-#define V_MC_CS1_END(x)             _SB_MAKEVALUE(x, S_MC_CS1_END)
-#define G_MC_CS1_END(x)             _SB_GETVALUE(x, S_MC_CS1_END, M_MC_CS1_END)
+#define S_MC_CS1_END		    16
+#define M_MC_CS1_END		    _SB_MAKEMASK(16, S_MC_CS1_END)
+#define V_MC_CS1_END(x)		    _SB_MAKEVALUE(x, S_MC_CS1_END)
+#define G_MC_CS1_END(x)		    _SB_GETVALUE(x, S_MC_CS1_END, M_MC_CS1_END)
 
-#define S_MC_CS2_END                32
-#define M_MC_CS2_END                _SB_MAKEMASK(16, S_MC_CS2_END)
-#define V_MC_CS2_END(x)             _SB_MAKEVALUE(x, S_MC_CS2_END)
-#define G_MC_CS2_END(x)             _SB_GETVALUE(x, S_MC_CS2_END, M_MC_CS2_END)
+#define S_MC_CS2_END		    32
+#define M_MC_CS2_END		    _SB_MAKEMASK(16, S_MC_CS2_END)
+#define V_MC_CS2_END(x)		    _SB_MAKEVALUE(x, S_MC_CS2_END)
+#define G_MC_CS2_END(x)		    _SB_GETVALUE(x, S_MC_CS2_END, M_MC_CS2_END)
 
-#define S_MC_CS3_END                48
-#define M_MC_CS3_END                _SB_MAKEMASK(16, S_MC_CS3_END)
-#define V_MC_CS3_END(x)             _SB_MAKEVALUE(x, S_MC_CS3_END)
-#define G_MC_CS3_END(x)             _SB_GETVALUE(x, S_MC_CS3_END, M_MC_CS3_END)
+#define S_MC_CS3_END		    48
+#define M_MC_CS3_END		    _SB_MAKEMASK(16, S_MC_CS3_END)
+#define V_MC_CS3_END(x)		    _SB_MAKEVALUE(x, S_MC_CS3_END)
+#define G_MC_CS3_END(x)		    _SB_GETVALUE(x, S_MC_CS3_END, M_MC_CS3_END)
 
 /*
  * Chip Select Interleave Register (Table 6-19)
  */
 
-#define S_MC_INTLV_RESERVED         0
-#define M_MC_INTLV_RESERVED         _SB_MAKEMASK(5, S_MC_INTLV_RESERVED)
+#define S_MC_INTLV_RESERVED	    0
+#define M_MC_INTLV_RESERVED	    _SB_MAKEMASK(5, S_MC_INTLV_RESERVED)
 
-#define S_MC_INTERLEAVE             7
-#define M_MC_INTERLEAVE             _SB_MAKEMASK(18, S_MC_INTERLEAVE)
-#define V_MC_INTERLEAVE(x)          _SB_MAKEVALUE(x, S_MC_INTERLEAVE)
+#define S_MC_INTERLEAVE		    7
+#define M_MC_INTERLEAVE		    _SB_MAKEMASK(18, S_MC_INTERLEAVE)
+#define V_MC_INTERLEAVE(x)	    _SB_MAKEVALUE(x, S_MC_INTERLEAVE)
 
-#define S_MC_INTLV_MBZ              25
-#define M_MC_INTLV_MBZ              _SB_MAKEMASK(39, S_MC_INTLV_MBZ)
+#define S_MC_INTLV_MBZ		    25
+#define M_MC_INTLV_MBZ		    _SB_MAKEMASK(39, S_MC_INTLV_MBZ)
 
 /*
  * Row Address Bits Register (Table 6-20)
  */
 
-#define S_MC_RAS_RESERVED           0
-#define M_MC_RAS_RESERVED           _SB_MAKEMASK(5, S_MC_RAS_RESERVED)
+#define S_MC_RAS_RESERVED	    0
+#define M_MC_RAS_RESERVED	    _SB_MAKEMASK(5, S_MC_RAS_RESERVED)
 
-#define S_MC_RAS_SELECT             12
-#define M_MC_RAS_SELECT             _SB_MAKEMASK(25, S_MC_RAS_SELECT)
-#define V_MC_RAS_SELECT(x)          _SB_MAKEVALUE(x, S_MC_RAS_SELECT)
+#define S_MC_RAS_SELECT		    12
+#define M_MC_RAS_SELECT		    _SB_MAKEMASK(25, S_MC_RAS_SELECT)
+#define V_MC_RAS_SELECT(x)	    _SB_MAKEVALUE(x, S_MC_RAS_SELECT)
 
-#define S_MC_RAS_MBZ                37
-#define M_MC_RAS_MBZ                _SB_MAKEMASK(27, S_MC_RAS_MBZ)
+#define S_MC_RAS_MBZ		    37
+#define M_MC_RAS_MBZ		    _SB_MAKEMASK(27, S_MC_RAS_MBZ)
 
 
 /*
  * Column Address Bits Register (Table 6-21)
  */
 
-#define S_MC_CAS_RESERVED           0
-#define M_MC_CAS_RESERVED           _SB_MAKEMASK(5, S_MC_CAS_RESERVED)
+#define S_MC_CAS_RESERVED	    0
+#define M_MC_CAS_RESERVED	    _SB_MAKEMASK(5, S_MC_CAS_RESERVED)
 
-#define S_MC_CAS_SELECT             5
-#define M_MC_CAS_SELECT             _SB_MAKEMASK(18, S_MC_CAS_SELECT)
-#define V_MC_CAS_SELECT(x)          _SB_MAKEVALUE(x, S_MC_CAS_SELECT)
+#define S_MC_CAS_SELECT		    5
+#define M_MC_CAS_SELECT		    _SB_MAKEMASK(18, S_MC_CAS_SELECT)
+#define V_MC_CAS_SELECT(x)	    _SB_MAKEVALUE(x, S_MC_CAS_SELECT)
 
-#define S_MC_CAS_MBZ                23
-#define M_MC_CAS_MBZ                _SB_MAKEMASK(41, S_MC_CAS_MBZ)
+#define S_MC_CAS_MBZ		    23
+#define M_MC_CAS_MBZ		    _SB_MAKEMASK(41, S_MC_CAS_MBZ)
 
 
 /*
  * Bank Address Address Bits Register (Table 6-22)
  */
 
-#define S_MC_BA_RESERVED            0
-#define M_MC_BA_RESERVED            _SB_MAKEMASK(5, S_MC_BA_RESERVED)
+#define S_MC_BA_RESERVED	    0
+#define M_MC_BA_RESERVED	    _SB_MAKEMASK(5, S_MC_BA_RESERVED)
 
-#define S_MC_BA_SELECT              5
-#define M_MC_BA_SELECT              _SB_MAKEMASK(20, S_MC_BA_SELECT)
-#define V_MC_BA_SELECT(x)           _SB_MAKEVALUE(x, S_MC_BA_SELECT)
+#define S_MC_BA_SELECT		    5
+#define M_MC_BA_SELECT		    _SB_MAKEMASK(20, S_MC_BA_SELECT)
+#define V_MC_BA_SELECT(x)	    _SB_MAKEVALUE(x, S_MC_BA_SELECT)
 
-#define S_MC_BA_MBZ                 25
-#define M_MC_BA_MBZ                 _SB_MAKEMASK(39, S_MC_BA_MBZ)
+#define S_MC_BA_MBZ		    25
+#define M_MC_BA_MBZ		    _SB_MAKEMASK(39, S_MC_BA_MBZ)
 
 /*
  * Chip Select Attribute Register (Table 6-23)
  */
 
-#define K_MC_CS_ATTR_CLOSED         0
-#define K_MC_CS_ATTR_CASCHECK       1
-#define K_MC_CS_ATTR_HINT           2
-#define K_MC_CS_ATTR_OPEN           3
+#define K_MC_CS_ATTR_CLOSED	    0
+#define K_MC_CS_ATTR_CASCHECK	    1
+#define K_MC_CS_ATTR_HINT	    2
+#define K_MC_CS_ATTR_OPEN	    3
 
-#define S_MC_CS0_PAGE               0
-#define M_MC_CS0_PAGE               _SB_MAKEMASK(2, S_MC_CS0_PAGE)
-#define V_MC_CS0_PAGE(x)            _SB_MAKEVALUE(x, S_MC_CS0_PAGE)
-#define G_MC_CS0_PAGE(x)            _SB_GETVALUE(x, S_MC_CS0_PAGE, M_MC_CS0_PAGE)
+#define S_MC_CS0_PAGE		    0
+#define M_MC_CS0_PAGE		    _SB_MAKEMASK(2, S_MC_CS0_PAGE)
+#define V_MC_CS0_PAGE(x)	    _SB_MAKEVALUE(x, S_MC_CS0_PAGE)
+#define G_MC_CS0_PAGE(x)	    _SB_GETVALUE(x, S_MC_CS0_PAGE, M_MC_CS0_PAGE)
 
-#define S_MC_CS1_PAGE               16
-#define M_MC_CS1_PAGE               _SB_MAKEMASK(2, S_MC_CS1_PAGE)
-#define V_MC_CS1_PAGE(x)            _SB_MAKEVALUE(x, S_MC_CS1_PAGE)
-#define G_MC_CS1_PAGE(x)            _SB_GETVALUE(x, S_MC_CS1_PAGE, M_MC_CS1_PAGE)
+#define S_MC_CS1_PAGE		    16
+#define M_MC_CS1_PAGE		    _SB_MAKEMASK(2, S_MC_CS1_PAGE)
+#define V_MC_CS1_PAGE(x)	    _SB_MAKEVALUE(x, S_MC_CS1_PAGE)
+#define G_MC_CS1_PAGE(x)	    _SB_GETVALUE(x, S_MC_CS1_PAGE, M_MC_CS1_PAGE)
 
-#define S_MC_CS2_PAGE               32
-#define M_MC_CS2_PAGE               _SB_MAKEMASK(2, S_MC_CS2_PAGE)
-#define V_MC_CS2_PAGE(x)            _SB_MAKEVALUE(x, S_MC_CS2_PAGE)
-#define G_MC_CS2_PAGE(x)            _SB_GETVALUE(x, S_MC_CS2_PAGE, M_MC_CS2_PAGE)
+#define S_MC_CS2_PAGE		    32
+#define M_MC_CS2_PAGE		    _SB_MAKEMASK(2, S_MC_CS2_PAGE)
+#define V_MC_CS2_PAGE(x)	    _SB_MAKEVALUE(x, S_MC_CS2_PAGE)
+#define G_MC_CS2_PAGE(x)	    _SB_GETVALUE(x, S_MC_CS2_PAGE, M_MC_CS2_PAGE)
 
-#define S_MC_CS3_PAGE               48
-#define M_MC_CS3_PAGE               _SB_MAKEMASK(2, S_MC_CS3_PAGE)
-#define V_MC_CS3_PAGE(x)            _SB_MAKEVALUE(x, S_MC_CS3_PAGE)
-#define G_MC_CS3_PAGE(x)            _SB_GETVALUE(x, S_MC_CS3_PAGE, M_MC_CS3_PAGE)
+#define S_MC_CS3_PAGE		    48
+#define M_MC_CS3_PAGE		    _SB_MAKEMASK(2, S_MC_CS3_PAGE)
+#define V_MC_CS3_PAGE(x)	    _SB_MAKEVALUE(x, S_MC_CS3_PAGE)
+#define G_MC_CS3_PAGE(x)	    _SB_GETVALUE(x, S_MC_CS3_PAGE, M_MC_CS3_PAGE)
 
 /*
  * ECC Test ECC Register (Table 6-25)
  */
 
-#define S_MC_ECC_INVERT             0
-#define M_MC_ECC_INVERT             _SB_MAKEMASK(8, S_MC_ECC_INVERT)
+#define S_MC_ECC_INVERT		    0
+#define M_MC_ECC_INVERT		    _SB_MAKEMASK(8, S_MC_ECC_INVERT)
 
 
 #endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_regs.h b/arch/mips/include/asm/sibyte/sb1250_regs.h
index 29b9f0b..ee86ca0 100644
--- a/arch/mips/include/asm/sibyte/sb1250_regs.h
+++ b/arch/mips/include/asm/sibyte/sb1250_regs.h
@@ -1,7 +1,7 @@
 /*  *********************************************************************
     *  SB1250 Board Support Package
     *
-    *  Register Definitions                     File: sb1250_regs.h
+    *  Register Definitions			File: sb1250_regs.h
     *
     *  This module contains the addresses of the on-chip peripherals
     *  on the SB1250.
@@ -61,45 +61,45 @@
  */
 
 #if SIBYTE_HDR_FEATURE_1250_112x		/* This MC only on 1250 & 112x */
-#define A_MC_BASE_0                 0x0010051000
-#define A_MC_BASE_1                 0x0010052000
-#define MC_REGISTER_SPACING         0x1000
+#define A_MC_BASE_0		    0x0010051000
+#define A_MC_BASE_1		    0x0010052000
+#define MC_REGISTER_SPACING	    0x1000
 
-#define A_MC_BASE(ctlid)            ((ctlid)*MC_REGISTER_SPACING+A_MC_BASE_0)
+#define A_MC_BASE(ctlid)	    ((ctlid)*MC_REGISTER_SPACING+A_MC_BASE_0)
 #define A_MC_REGISTER(ctlid, reg)    (A_MC_BASE(ctlid)+(reg))
 
-#define R_MC_CONFIG                 0x0000000100
-#define R_MC_DRAMCMD                0x0000000120
-#define R_MC_DRAMMODE               0x0000000140
-#define R_MC_TIMING1                0x0000000160
-#define R_MC_TIMING2                0x0000000180
-#define R_MC_CS_START               0x00000001A0
-#define R_MC_CS_END                 0x00000001C0
-#define R_MC_CS_INTERLEAVE          0x00000001E0
-#define S_MC_CS_STARTEND            16
+#define R_MC_CONFIG		    0x0000000100
+#define R_MC_DRAMCMD		    0x0000000120
+#define R_MC_DRAMMODE		    0x0000000140
+#define R_MC_TIMING1		    0x0000000160
+#define R_MC_TIMING2		    0x0000000180
+#define R_MC_CS_START		    0x00000001A0
+#define R_MC_CS_END		    0x00000001C0
+#define R_MC_CS_INTERLEAVE	    0x00000001E0
+#define S_MC_CS_STARTEND	    16
 
-#define R_MC_CSX_BASE               0x0000000200
-#define R_MC_CSX_ROW                0x0000000000	/* relative to CSX_BASE, above */
-#define R_MC_CSX_COL                0x0000000020	/* relative to CSX_BASE, above */
-#define R_MC_CSX_BA                 0x0000000040	/* relative to CSX_BASE, above */
-#define MC_CSX_SPACING              0x0000000060	/* relative to CSX_BASE, above */
+#define R_MC_CSX_BASE		    0x0000000200
+#define R_MC_CSX_ROW		    0x0000000000	/* relative to CSX_BASE, above */
+#define R_MC_CSX_COL		    0x0000000020	/* relative to CSX_BASE, above */
+#define R_MC_CSX_BA		    0x0000000040	/* relative to CSX_BASE, above */
+#define MC_CSX_SPACING		    0x0000000060	/* relative to CSX_BASE, above */
 
-#define R_MC_CS0_ROW                0x0000000200
-#define R_MC_CS0_COL                0x0000000220
-#define R_MC_CS0_BA                 0x0000000240
-#define R_MC_CS1_ROW                0x0000000260
-#define R_MC_CS1_COL                0x0000000280
-#define R_MC_CS1_BA                 0x00000002A0
-#define R_MC_CS2_ROW                0x00000002C0
-#define R_MC_CS2_COL                0x00000002E0
-#define R_MC_CS2_BA                 0x0000000300
-#define R_MC_CS3_ROW                0x0000000320
-#define R_MC_CS3_COL                0x0000000340
-#define R_MC_CS3_BA                 0x0000000360
-#define R_MC_CS_ATTR                0x0000000380
-#define R_MC_TEST_DATA              0x0000000400
-#define R_MC_TEST_ECC               0x0000000420
-#define R_MC_MCLK_CFG               0x0000000500
+#define R_MC_CS0_ROW		    0x0000000200
+#define R_MC_CS0_COL		    0x0000000220
+#define R_MC_CS0_BA		    0x0000000240
+#define R_MC_CS1_ROW		    0x0000000260
+#define R_MC_CS1_COL		    0x0000000280
+#define R_MC_CS1_BA		    0x00000002A0
+#define R_MC_CS2_ROW		    0x00000002C0
+#define R_MC_CS2_COL		    0x00000002E0
+#define R_MC_CS2_BA		    0x0000000300
+#define R_MC_CS3_ROW		    0x0000000320
+#define R_MC_CS3_COL		    0x0000000340
+#define R_MC_CS3_BA		    0x0000000360
+#define R_MC_CS_ATTR		    0x0000000380
+#define R_MC_TEST_DATA		    0x0000000400
+#define R_MC_TEST_ECC		    0x0000000420
+#define R_MC_MCLK_CFG		    0x0000000500
 
 #endif	/* 1250 & 112x */
 
@@ -109,14 +109,14 @@
 
 #if SIBYTE_HDR_FEATURE_1250_112x	/* This L2C only on 1250/112x */
 
-#define A_L2_READ_TAG               0x0010040018
-#define A_L2_ECC_TAG                0x0010040038
+#define A_L2_READ_TAG		    0x0010040018
+#define A_L2_ECC_TAG		    0x0010040038
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
-#define A_L2_READ_MISC              0x0010040058
+#define A_L2_READ_MISC		    0x0010040058
 #endif /* 1250 PASS3 || 112x PASS1 */
-#define A_L2_WAY_DISABLE            0x0010041000
-#define A_L2_MAKEDISABLE(x)         (A_L2_WAY_DISABLE | (((~(x))&0x0F) << 8))
-#define A_L2_MGMT_TAG_BASE          0x00D0000000
+#define A_L2_WAY_DISABLE	    0x0010041000
+#define A_L2_MAKEDISABLE(x)	    (A_L2_WAY_DISABLE | (((~(x))&0x0F) << 8))
+#define A_L2_MGMT_TAG_BASE	    0x00D0000000
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define A_L2_CACHE_DISABLE	   0x0010042000
@@ -124,10 +124,10 @@
 #define A_L2_MISC_CONFIG	   0x0010043000
 #endif /* 1250 PASS2 || 112x PASS1 */
 
-/* Backward-compatibility definitions.  */
+/* Backward-compatibility definitions.	*/
 /* XXX: discourage people from using these constants.  */
-#define A_L2_READ_ADDRESS           A_L2_READ_TAG
-#define A_L2_EEC_ADDRESS            A_L2_ECC_TAG
+#define A_L2_READ_ADDRESS	    A_L2_READ_TAG
+#define A_L2_EEC_ADDRESS	    A_L2_ECC_TAG
 
 #endif
 
@@ -137,8 +137,8 @@
     ********************************************************************* */
 
 #if SIBYTE_HDR_FEATURE_1250_112x	/* This PCI/HT only on 1250/112x */
-#define A_PCI_TYPE00_HEADER         0x00DE000000
-#define A_PCI_TYPE01_HEADER         0x00DE000800
+#define A_PCI_TYPE00_HEADER	    0x00DE000000
+#define A_PCI_TYPE01_HEADER	    0x00DE000800
 #endif
 
 
@@ -146,121 +146,121 @@
     * Ethernet DMA and MACs
     ********************************************************************* */
 
-#define A_MAC_BASE_0                0x0010064000
-#define A_MAC_BASE_1                0x0010065000
+#define A_MAC_BASE_0		    0x0010064000
+#define A_MAC_BASE_1		    0x0010065000
 #if SIBYTE_HDR_FEATURE_CHIP(1250)
-#define A_MAC_BASE_2                0x0010066000
+#define A_MAC_BASE_2		    0x0010066000
 #endif /* 1250 */
 
-#define MAC_SPACING                 0x1000
-#define MAC_DMA_TXRX_SPACING        0x0400
-#define MAC_DMA_CHANNEL_SPACING     0x0100
-#define DMA_RX                      0
-#define DMA_TX                      1
+#define MAC_SPACING		    0x1000
+#define MAC_DMA_TXRX_SPACING	    0x0400
+#define MAC_DMA_CHANNEL_SPACING	    0x0100
+#define DMA_RX			    0
+#define DMA_TX			    1
 #define MAC_NUM_DMACHAN		    2		    /* channels per direction */
 
 /* XXX: not correct; depends on SOC type.  */
-#define MAC_NUM_PORTS               3
+#define MAC_NUM_PORTS		    3
 
-#define A_MAC_CHANNEL_BASE(macnum)                  \
-            (A_MAC_BASE_0 +                         \
-             MAC_SPACING*(macnum))
+#define A_MAC_CHANNEL_BASE(macnum)		    \
+	    (A_MAC_BASE_0 +			    \
+	     MAC_SPACING*(macnum))
 
-#define A_MAC_REGISTER(macnum,reg)                  \
-            (A_MAC_BASE_0 +                         \
-             MAC_SPACING*(macnum) + (reg))
+#define A_MAC_REGISTER(macnum,reg)		    \
+	    (A_MAC_BASE_0 +			    \
+	     MAC_SPACING*(macnum) + (reg))
 
 
 #define R_MAC_DMA_CHANNELS		0x800 /* Relative to A_MAC_CHANNEL_BASE */
 
 #define A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan)  \
-             ((A_MAC_CHANNEL_BASE(macnum)) +        \
-             R_MAC_DMA_CHANNELS +                   \
-             (MAC_DMA_TXRX_SPACING*(txrx)) +        \
-             (MAC_DMA_CHANNEL_SPACING*(chan)))
+	     ((A_MAC_CHANNEL_BASE(macnum)) +	    \
+	     R_MAC_DMA_CHANNELS +		    \
+	     (MAC_DMA_TXRX_SPACING*(txrx)) +	    \
+	     (MAC_DMA_CHANNEL_SPACING*(chan)))
 
 #define R_MAC_DMA_CHANNEL_BASE(txrx, chan)		\
-             (R_MAC_DMA_CHANNELS +                   \
-             (MAC_DMA_TXRX_SPACING*(txrx)) +        \
-             (MAC_DMA_CHANNEL_SPACING*(chan)))
+	     (R_MAC_DMA_CHANNELS +		     \
+	     (MAC_DMA_TXRX_SPACING*(txrx)) +	    \
+	     (MAC_DMA_CHANNEL_SPACING*(chan)))
 
-#define A_MAC_DMA_REGISTER(macnum, txrx, chan, reg)           \
-            (A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) +    \
-            (reg))
+#define A_MAC_DMA_REGISTER(macnum, txrx, chan, reg)	      \
+	    (A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) +    \
+	    (reg))
 
-#define R_MAC_DMA_REGISTER(txrx, chan, reg)           \
-            (R_MAC_DMA_CHANNEL_BASE(txrx, chan) +    \
-            (reg))
+#define R_MAC_DMA_REGISTER(txrx, chan, reg)	      \
+	    (R_MAC_DMA_CHANNEL_BASE(txrx, chan) +    \
+	    (reg))
 
 /*
  * DMA channel registers, relative to A_MAC_DMA_CHANNEL_BASE
  */
 
-#define R_MAC_DMA_CONFIG0               0x00000000
-#define R_MAC_DMA_CONFIG1               0x00000008
-#define R_MAC_DMA_DSCR_BASE             0x00000010
-#define R_MAC_DMA_DSCR_CNT              0x00000018
-#define R_MAC_DMA_CUR_DSCRA             0x00000020
-#define R_MAC_DMA_CUR_DSCRB             0x00000028
-#define R_MAC_DMA_CUR_DSCRADDR          0x00000030
+#define R_MAC_DMA_CONFIG0		0x00000000
+#define R_MAC_DMA_CONFIG1		0x00000008
+#define R_MAC_DMA_DSCR_BASE		0x00000010
+#define R_MAC_DMA_DSCR_CNT		0x00000018
+#define R_MAC_DMA_CUR_DSCRA		0x00000020
+#define R_MAC_DMA_CUR_DSCRB		0x00000028
+#define R_MAC_DMA_CUR_DSCRADDR		0x00000030
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
-#define R_MAC_DMA_OODPKTLOST_RX         0x00000038	/* rx only */
+#define R_MAC_DMA_OODPKTLOST_RX		0x00000038	/* rx only */
 #endif /* 1250 PASS3 || 112x PASS1 */
 
 /*
  * RMON Counters
  */
 
-#define R_MAC_RMON_TX_BYTES             0x00000000
-#define R_MAC_RMON_COLLISIONS           0x00000008
-#define R_MAC_RMON_LATE_COL             0x00000010
-#define R_MAC_RMON_EX_COL               0x00000018
-#define R_MAC_RMON_FCS_ERROR            0x00000020
-#define R_MAC_RMON_TX_ABORT             0x00000028
+#define R_MAC_RMON_TX_BYTES		0x00000000
+#define R_MAC_RMON_COLLISIONS		0x00000008
+#define R_MAC_RMON_LATE_COL		0x00000010
+#define R_MAC_RMON_EX_COL		0x00000018
+#define R_MAC_RMON_FCS_ERROR		0x00000020
+#define R_MAC_RMON_TX_ABORT		0x00000028
 /* Counter #6 (0x30) now reserved */
-#define R_MAC_RMON_TX_BAD               0x00000038
-#define R_MAC_RMON_TX_GOOD              0x00000040
-#define R_MAC_RMON_TX_RUNT              0x00000048
-#define R_MAC_RMON_TX_OVERSIZE          0x00000050
-#define R_MAC_RMON_RX_BYTES             0x00000080
-#define R_MAC_RMON_RX_MCAST             0x00000088
-#define R_MAC_RMON_RX_BCAST             0x00000090
-#define R_MAC_RMON_RX_BAD               0x00000098
-#define R_MAC_RMON_RX_GOOD              0x000000A0
-#define R_MAC_RMON_RX_RUNT              0x000000A8
-#define R_MAC_RMON_RX_OVERSIZE          0x000000B0
-#define R_MAC_RMON_RX_FCS_ERROR         0x000000B8
-#define R_MAC_RMON_RX_LENGTH_ERROR      0x000000C0
-#define R_MAC_RMON_RX_CODE_ERROR        0x000000C8
-#define R_MAC_RMON_RX_ALIGN_ERROR       0x000000D0
+#define R_MAC_RMON_TX_BAD		0x00000038
+#define R_MAC_RMON_TX_GOOD		0x00000040
+#define R_MAC_RMON_TX_RUNT		0x00000048
+#define R_MAC_RMON_TX_OVERSIZE		0x00000050
+#define R_MAC_RMON_RX_BYTES		0x00000080
+#define R_MAC_RMON_RX_MCAST		0x00000088
+#define R_MAC_RMON_RX_BCAST		0x00000090
+#define R_MAC_RMON_RX_BAD		0x00000098
+#define R_MAC_RMON_RX_GOOD		0x000000A0
+#define R_MAC_RMON_RX_RUNT		0x000000A8
+#define R_MAC_RMON_RX_OVERSIZE		0x000000B0
+#define R_MAC_RMON_RX_FCS_ERROR		0x000000B8
+#define R_MAC_RMON_RX_LENGTH_ERROR	0x000000C0
+#define R_MAC_RMON_RX_CODE_ERROR	0x000000C8
+#define R_MAC_RMON_RX_ALIGN_ERROR	0x000000D0
 
 /* Updated to spec 0.2 */
-#define R_MAC_CFG                       0x00000100
-#define R_MAC_THRSH_CFG                 0x00000108
-#define R_MAC_VLANTAG                   0x00000110
-#define R_MAC_FRAMECFG                  0x00000118
-#define R_MAC_EOPCNT                    0x00000120
-#define R_MAC_FIFO_PTRS                 0x00000128
-#define R_MAC_ADFILTER_CFG              0x00000200
-#define R_MAC_ETHERNET_ADDR             0x00000208
-#define R_MAC_PKT_TYPE                  0x00000210
+#define R_MAC_CFG			0x00000100
+#define R_MAC_THRSH_CFG			0x00000108
+#define R_MAC_VLANTAG			0x00000110
+#define R_MAC_FRAMECFG			0x00000118
+#define R_MAC_EOPCNT			0x00000120
+#define R_MAC_FIFO_PTRS			0x00000128
+#define R_MAC_ADFILTER_CFG		0x00000200
+#define R_MAC_ETHERNET_ADDR		0x00000208
+#define R_MAC_PKT_TYPE			0x00000210
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define R_MAC_ADMASK0			0x00000218
 #define R_MAC_ADMASK1			0x00000220
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
-#define R_MAC_HASH_BASE                 0x00000240
-#define R_MAC_ADDR_BASE                 0x00000280
-#define R_MAC_CHLO0_BASE                0x00000300
-#define R_MAC_CHUP0_BASE                0x00000320
-#define R_MAC_ENABLE                    0x00000400
-#define R_MAC_STATUS                    0x00000408
-#define R_MAC_INT_MASK                  0x00000410
-#define R_MAC_TXD_CTL                   0x00000420
-#define R_MAC_MDIO                      0x00000428
+#define R_MAC_HASH_BASE			0x00000240
+#define R_MAC_ADDR_BASE			0x00000280
+#define R_MAC_CHLO0_BASE		0x00000300
+#define R_MAC_CHUP0_BASE		0x00000320
+#define R_MAC_ENABLE			0x00000400
+#define R_MAC_STATUS			0x00000408
+#define R_MAC_INT_MASK			0x00000410
+#define R_MAC_TXD_CTL			0x00000420
+#define R_MAC_MDIO			0x00000428
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define R_MAC_STATUS1		        0x00000430
+#define R_MAC_STATUS1			0x00000430
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
-#define R_MAC_DEBUG_STATUS              0x00000448
+#define R_MAC_DEBUG_STATUS		0x00000448
 
 #define MAC_HASH_COUNT			8
 #define MAC_ADDR_COUNT			8
@@ -273,11 +273,11 @@
 
 
 #if SIBYTE_HDR_FEATURE_1250_112x    /* This MC only on 1250 & 112x */
-#define R_DUART_NUM_PORTS           2
+#define R_DUART_NUM_PORTS	    2
 
-#define A_DUART                     0x0010060000
+#define A_DUART			    0x0010060000
 
-#define DUART_CHANREG_SPACING       0x100
+#define DUART_CHANREG_SPACING	    0x100
 
 #define A_DUART_CHANREG(chan, reg)					\
 	(A_DUART + DUART_CHANREG_SPACING * ((chan) + 1) + (reg))
@@ -341,44 +341,44 @@
  * These constants are the absolute addresses.
  */
 
-#define A_DUART_MODE_REG_1_A        0x0010060100
-#define A_DUART_MODE_REG_2_A        0x0010060110
-#define A_DUART_STATUS_A            0x0010060120
-#define A_DUART_CLK_SEL_A           0x0010060130
-#define A_DUART_CMD_A               0x0010060150
-#define A_DUART_RX_HOLD_A           0x0010060160
-#define A_DUART_TX_HOLD_A           0x0010060170
+#define A_DUART_MODE_REG_1_A	    0x0010060100
+#define A_DUART_MODE_REG_2_A	    0x0010060110
+#define A_DUART_STATUS_A	    0x0010060120
+#define A_DUART_CLK_SEL_A	    0x0010060130
+#define A_DUART_CMD_A		    0x0010060150
+#define A_DUART_RX_HOLD_A	    0x0010060160
+#define A_DUART_TX_HOLD_A	    0x0010060170
 
-#define A_DUART_MODE_REG_1_B        0x0010060200
-#define A_DUART_MODE_REG_2_B        0x0010060210
-#define A_DUART_STATUS_B            0x0010060220
-#define A_DUART_CLK_SEL_B           0x0010060230
-#define A_DUART_CMD_B               0x0010060250
-#define A_DUART_RX_HOLD_B           0x0010060260
-#define A_DUART_TX_HOLD_B           0x0010060270
+#define A_DUART_MODE_REG_1_B	    0x0010060200
+#define A_DUART_MODE_REG_2_B	    0x0010060210
+#define A_DUART_STATUS_B	    0x0010060220
+#define A_DUART_CLK_SEL_B	    0x0010060230
+#define A_DUART_CMD_B		    0x0010060250
+#define A_DUART_RX_HOLD_B	    0x0010060260
+#define A_DUART_TX_HOLD_B	    0x0010060270
 
-#define A_DUART_INPORT_CHNG         0x0010060300
-#define A_DUART_AUX_CTRL            0x0010060310
-#define A_DUART_ISR_A               0x0010060320
-#define A_DUART_IMR_A               0x0010060330
-#define A_DUART_ISR_B               0x0010060340
-#define A_DUART_IMR_B               0x0010060350
-#define A_DUART_OUT_PORT            0x0010060360
-#define A_DUART_OPCR                0x0010060370
-#define A_DUART_IN_PORT             0x0010060380
-#define A_DUART_ISR                 0x0010060390
-#define A_DUART_IMR                 0x00100603A0
-#define A_DUART_SET_OPR             0x00100603B0
-#define A_DUART_CLEAR_OPR           0x00100603C0
-#define A_DUART_INPORT_CHNG_A       0x00100603D0
-#define A_DUART_INPORT_CHNG_B       0x00100603E0
+#define A_DUART_INPORT_CHNG	    0x0010060300
+#define A_DUART_AUX_CTRL	    0x0010060310
+#define A_DUART_ISR_A		    0x0010060320
+#define A_DUART_IMR_A		    0x0010060330
+#define A_DUART_ISR_B		    0x0010060340
+#define A_DUART_IMR_B		    0x0010060350
+#define A_DUART_OUT_PORT	    0x0010060360
+#define A_DUART_OPCR		    0x0010060370
+#define A_DUART_IN_PORT		    0x0010060380
+#define A_DUART_ISR		    0x0010060390
+#define A_DUART_IMR		    0x00100603A0
+#define A_DUART_SET_OPR		    0x00100603B0
+#define A_DUART_CLEAR_OPR	    0x00100603C0
+#define A_DUART_INPORT_CHNG_A	    0x00100603D0
+#define A_DUART_INPORT_CHNG_B	    0x00100603E0
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define A_DUART_FULL_CTL_A	    0x0010060140
 #define A_DUART_FULL_CTL_B	    0x0010060240
 
-#define A_DUART_OPCR_A	  	    0x0010060180
-#define A_DUART_OPCR_B	  	    0x0010060280
+#define A_DUART_OPCR_A		    0x0010060180
+#define A_DUART_OPCR_B		    0x0010060280
 
 #define A_DUART_INPORT_CHNG_DEBUG   0x00100603F0
 #endif /* 1250 PASS2 || 112x PASS1 */
@@ -391,94 +391,94 @@
 
 #if SIBYTE_HDR_FEATURE_1250_112x	/* sync serial only on 1250/112x */
 
-#define A_SER_BASE_0                0x0010060400
-#define A_SER_BASE_1                0x0010060800
-#define SER_SPACING                 0x400
+#define A_SER_BASE_0		    0x0010060400
+#define A_SER_BASE_1		    0x0010060800
+#define SER_SPACING		    0x400
 
-#define SER_DMA_TXRX_SPACING        0x80
+#define SER_DMA_TXRX_SPACING	    0x80
 
-#define SER_NUM_PORTS               2
+#define SER_NUM_PORTS		    2
 
-#define A_SER_CHANNEL_BASE(sernum)                  \
-            (A_SER_BASE_0 +                         \
-             SER_SPACING*(sernum))
+#define A_SER_CHANNEL_BASE(sernum)		    \
+	    (A_SER_BASE_0 +			    \
+	     SER_SPACING*(sernum))
 
-#define A_SER_REGISTER(sernum,reg)                  \
-            (A_SER_BASE_0 +                         \
-             SER_SPACING*(sernum) + (reg))
+#define A_SER_REGISTER(sernum,reg)		    \
+	    (A_SER_BASE_0 +			    \
+	     SER_SPACING*(sernum) + (reg))
 
 
 #define R_SER_DMA_CHANNELS		0   /* Relative to A_SER_BASE_x */
 
 #define A_SER_DMA_CHANNEL_BASE(sernum,txrx)    \
-             ((A_SER_CHANNEL_BASE(sernum)) +        \
-             R_SER_DMA_CHANNELS +                   \
-             (SER_DMA_TXRX_SPACING*(txrx)))
+	     ((A_SER_CHANNEL_BASE(sernum)) +	    \
+	     R_SER_DMA_CHANNELS +		    \
+	     (SER_DMA_TXRX_SPACING*(txrx)))
 
-#define A_SER_DMA_REGISTER(sernum, txrx, reg)           \
-            (A_SER_DMA_CHANNEL_BASE(sernum, txrx) +    \
-            (reg))
+#define A_SER_DMA_REGISTER(sernum, txrx, reg)		\
+	    (A_SER_DMA_CHANNEL_BASE(sernum, txrx) +    \
+	    (reg))
 
 
 /*
  * DMA channel registers, relative to A_SER_DMA_CHANNEL_BASE
  */
 
-#define R_SER_DMA_CONFIG0           0x00000000
-#define R_SER_DMA_CONFIG1           0x00000008
-#define R_SER_DMA_DSCR_BASE         0x00000010
-#define R_SER_DMA_DSCR_CNT          0x00000018
-#define R_SER_DMA_CUR_DSCRA         0x00000020
-#define R_SER_DMA_CUR_DSCRB         0x00000028
-#define R_SER_DMA_CUR_DSCRADDR      0x00000030
+#define R_SER_DMA_CONFIG0	    0x00000000
+#define R_SER_DMA_CONFIG1	    0x00000008
+#define R_SER_DMA_DSCR_BASE	    0x00000010
+#define R_SER_DMA_DSCR_CNT	    0x00000018
+#define R_SER_DMA_CUR_DSCRA	    0x00000020
+#define R_SER_DMA_CUR_DSCRB	    0x00000028
+#define R_SER_DMA_CUR_DSCRADDR	    0x00000030
 
-#define R_SER_DMA_CONFIG0_RX        0x00000000
-#define R_SER_DMA_CONFIG1_RX        0x00000008
-#define R_SER_DMA_DSCR_BASE_RX      0x00000010
-#define R_SER_DMA_DSCR_COUNT_RX     0x00000018
-#define R_SER_DMA_CUR_DSCR_A_RX     0x00000020
-#define R_SER_DMA_CUR_DSCR_B_RX     0x00000028
+#define R_SER_DMA_CONFIG0_RX	    0x00000000
+#define R_SER_DMA_CONFIG1_RX	    0x00000008
+#define R_SER_DMA_DSCR_BASE_RX	    0x00000010
+#define R_SER_DMA_DSCR_COUNT_RX	    0x00000018
+#define R_SER_DMA_CUR_DSCR_A_RX	    0x00000020
+#define R_SER_DMA_CUR_DSCR_B_RX	    0x00000028
 #define R_SER_DMA_CUR_DSCR_ADDR_RX  0x00000030
 
-#define R_SER_DMA_CONFIG0_TX        0x00000080
-#define R_SER_DMA_CONFIG1_TX        0x00000088
-#define R_SER_DMA_DSCR_BASE_TX      0x00000090
-#define R_SER_DMA_DSCR_COUNT_TX     0x00000098
-#define R_SER_DMA_CUR_DSCR_A_TX     0x000000A0
-#define R_SER_DMA_CUR_DSCR_B_TX     0x000000A8
+#define R_SER_DMA_CONFIG0_TX	    0x00000080
+#define R_SER_DMA_CONFIG1_TX	    0x00000088
+#define R_SER_DMA_DSCR_BASE_TX	    0x00000090
+#define R_SER_DMA_DSCR_COUNT_TX	    0x00000098
+#define R_SER_DMA_CUR_DSCR_A_TX	    0x000000A0
+#define R_SER_DMA_CUR_DSCR_B_TX	    0x000000A8
 #define R_SER_DMA_CUR_DSCR_ADDR_TX  0x000000B0
 
-#define R_SER_MODE                  0x00000100
-#define R_SER_MINFRM_SZ             0x00000108
-#define R_SER_MAXFRM_SZ             0x00000110
-#define R_SER_ADDR                  0x00000118
-#define R_SER_USR0_ADDR             0x00000120
-#define R_SER_USR1_ADDR             0x00000128
-#define R_SER_USR2_ADDR             0x00000130
-#define R_SER_USR3_ADDR             0x00000138
-#define R_SER_CMD                   0x00000140
-#define R_SER_TX_RD_THRSH           0x00000160
-#define R_SER_TX_WR_THRSH           0x00000168
-#define R_SER_RX_RD_THRSH           0x00000170
+#define R_SER_MODE		    0x00000100
+#define R_SER_MINFRM_SZ		    0x00000108
+#define R_SER_MAXFRM_SZ		    0x00000110
+#define R_SER_ADDR		    0x00000118
+#define R_SER_USR0_ADDR		    0x00000120
+#define R_SER_USR1_ADDR		    0x00000128
+#define R_SER_USR2_ADDR		    0x00000130
+#define R_SER_USR3_ADDR		    0x00000138
+#define R_SER_CMD		    0x00000140
+#define R_SER_TX_RD_THRSH	    0x00000160
+#define R_SER_TX_WR_THRSH	    0x00000168
+#define R_SER_RX_RD_THRSH	    0x00000170
 #define R_SER_LINE_MODE		    0x00000178
-#define R_SER_DMA_ENABLE            0x00000180
-#define R_SER_INT_MASK              0x00000190
-#define R_SER_STATUS                0x00000188
-#define R_SER_STATUS_DEBUG          0x000001A8
-#define R_SER_RX_TABLE_BASE         0x00000200
-#define SER_RX_TABLE_COUNT          16
-#define R_SER_TX_TABLE_BASE         0x00000300
-#define SER_TX_TABLE_COUNT          16
+#define R_SER_DMA_ENABLE	    0x00000180
+#define R_SER_INT_MASK		    0x00000190
+#define R_SER_STATUS		    0x00000188
+#define R_SER_STATUS_DEBUG	    0x000001A8
+#define R_SER_RX_TABLE_BASE	    0x00000200
+#define SER_RX_TABLE_COUNT	    16
+#define R_SER_TX_TABLE_BASE	    0x00000300
+#define SER_TX_TABLE_COUNT	    16
 
 /* RMON Counters */
-#define R_SER_RMON_TX_BYTE_LO       0x000001C0
-#define R_SER_RMON_TX_BYTE_HI       0x000001C8
-#define R_SER_RMON_RX_BYTE_LO       0x000001D0
-#define R_SER_RMON_RX_BYTE_HI       0x000001D8
-#define R_SER_RMON_TX_UNDERRUN      0x000001E0
-#define R_SER_RMON_RX_OVERFLOW      0x000001E8
-#define R_SER_RMON_RX_ERRORS        0x000001F0
-#define R_SER_RMON_RX_BADADDR       0x000001F8
+#define R_SER_RMON_TX_BYTE_LO	    0x000001C0
+#define R_SER_RMON_TX_BYTE_HI	    0x000001C8
+#define R_SER_RMON_RX_BYTE_LO	    0x000001D0
+#define R_SER_RMON_RX_BYTE_HI	    0x000001D8
+#define R_SER_RMON_TX_UNDERRUN	    0x000001E0
+#define R_SER_RMON_RX_OVERFLOW	    0x000001E8
+#define R_SER_RMON_RX_ERRORS	    0x000001F0
+#define R_SER_RMON_RX_BADADDR	    0x000001F8
 
 #endif	/* 1250/112x */
 
@@ -486,38 +486,38 @@
     * Generic Bus Registers
     ********************************************************************* */
 
-#define IO_EXT_CFG_COUNT            8
+#define IO_EXT_CFG_COUNT	    8
 
 #define A_IO_EXT_BASE		    0x0010061000
 #define A_IO_EXT_REG(r)		    (A_IO_EXT_BASE + (r))
 
-#define A_IO_EXT_CFG_BASE           0x0010061000
-#define A_IO_EXT_MULT_SIZE_BASE     0x0010061100
+#define A_IO_EXT_CFG_BASE	    0x0010061000
+#define A_IO_EXT_MULT_SIZE_BASE	    0x0010061100
 #define A_IO_EXT_START_ADDR_BASE    0x0010061200
-#define A_IO_EXT_TIME_CFG0_BASE     0x0010061600
-#define A_IO_EXT_TIME_CFG1_BASE     0x0010061700
+#define A_IO_EXT_TIME_CFG0_BASE	    0x0010061600
+#define A_IO_EXT_TIME_CFG1_BASE	    0x0010061700
 
 #define IO_EXT_REGISTER_SPACING	    8
 #define A_IO_EXT_CS_BASE(cs)	    (A_IO_EXT_CFG_BASE+IO_EXT_REGISTER_SPACING*(cs))
 #define R_IO_EXT_REG(reg, cs)	    ((cs)*IO_EXT_REGISTER_SPACING + (reg))
 
 #define R_IO_EXT_CFG		    0x0000
-#define R_IO_EXT_MULT_SIZE          0x0100
+#define R_IO_EXT_MULT_SIZE	    0x0100
 #define R_IO_EXT_START_ADDR	    0x0200
-#define R_IO_EXT_TIME_CFG0          0x0600
-#define R_IO_EXT_TIME_CFG1          0x0700
+#define R_IO_EXT_TIME_CFG0	    0x0600
+#define R_IO_EXT_TIME_CFG1	    0x0700
 
 
-#define A_IO_INTERRUPT_STATUS       0x0010061A00
-#define A_IO_INTERRUPT_DATA0        0x0010061A10
-#define A_IO_INTERRUPT_DATA1        0x0010061A18
-#define A_IO_INTERRUPT_DATA2        0x0010061A20
-#define A_IO_INTERRUPT_DATA3        0x0010061A28
-#define A_IO_INTERRUPT_ADDR0        0x0010061A30
-#define A_IO_INTERRUPT_ADDR1        0x0010061A40
-#define A_IO_INTERRUPT_PARITY       0x0010061A50
-#define A_IO_PCMCIA_CFG             0x0010061A60
-#define A_IO_PCMCIA_STATUS          0x0010061A70
+#define A_IO_INTERRUPT_STATUS	    0x0010061A00
+#define A_IO_INTERRUPT_DATA0	    0x0010061A10
+#define A_IO_INTERRUPT_DATA1	    0x0010061A18
+#define A_IO_INTERRUPT_DATA2	    0x0010061A20
+#define A_IO_INTERRUPT_DATA3	    0x0010061A28
+#define A_IO_INTERRUPT_ADDR0	    0x0010061A30
+#define A_IO_INTERRUPT_ADDR1	    0x0010061A40
+#define A_IO_INTERRUPT_PARITY	    0x0010061A50
+#define A_IO_PCMCIA_CFG		    0x0010061A60
+#define A_IO_PCMCIA_STATUS	    0x0010061A70
 #define A_IO_DRIVE_0		    0x0010061300
 #define A_IO_DRIVE_1		    0x0010061308
 #define A_IO_DRIVE_2		    0x0010061310
@@ -527,76 +527,76 @@
 #define R_IO_DRIVE(x)		    ((x)*IO_DRIVE_REGISTER_SPACING)
 #define A_IO_DRIVE(x)		    (A_IO_DRIVE_BASE + R_IO_DRIVE(x))
 
-#define R_IO_INTERRUPT_STATUS       0x0A00
-#define R_IO_INTERRUPT_DATA0        0x0A10
-#define R_IO_INTERRUPT_DATA1        0x0A18
-#define R_IO_INTERRUPT_DATA2        0x0A20
-#define R_IO_INTERRUPT_DATA3        0x0A28
-#define R_IO_INTERRUPT_ADDR0        0x0A30
-#define R_IO_INTERRUPT_ADDR1        0x0A40
-#define R_IO_INTERRUPT_PARITY       0x0A50
-#define R_IO_PCMCIA_CFG             0x0A60
-#define R_IO_PCMCIA_STATUS          0x0A70
+#define R_IO_INTERRUPT_STATUS	    0x0A00
+#define R_IO_INTERRUPT_DATA0	    0x0A10
+#define R_IO_INTERRUPT_DATA1	    0x0A18
+#define R_IO_INTERRUPT_DATA2	    0x0A20
+#define R_IO_INTERRUPT_DATA3	    0x0A28
+#define R_IO_INTERRUPT_ADDR0	    0x0A30
+#define R_IO_INTERRUPT_ADDR1	    0x0A40
+#define R_IO_INTERRUPT_PARITY	    0x0A50
+#define R_IO_PCMCIA_CFG		    0x0A60
+#define R_IO_PCMCIA_STATUS	    0x0A70
 
 /*  *********************************************************************
     * GPIO Registers
     ********************************************************************* */
 
-#define A_GPIO_CLR_EDGE             0x0010061A80
-#define A_GPIO_INT_TYPE             0x0010061A88
-#define A_GPIO_INPUT_INVERT         0x0010061A90
-#define A_GPIO_GLITCH               0x0010061A98
-#define A_GPIO_READ                 0x0010061AA0
-#define A_GPIO_DIRECTION            0x0010061AA8
-#define A_GPIO_PIN_CLR              0x0010061AB0
-#define A_GPIO_PIN_SET              0x0010061AB8
+#define A_GPIO_CLR_EDGE		    0x0010061A80
+#define A_GPIO_INT_TYPE		    0x0010061A88
+#define A_GPIO_INPUT_INVERT	    0x0010061A90
+#define A_GPIO_GLITCH		    0x0010061A98
+#define A_GPIO_READ		    0x0010061AA0
+#define A_GPIO_DIRECTION	    0x0010061AA8
+#define A_GPIO_PIN_CLR		    0x0010061AB0
+#define A_GPIO_PIN_SET		    0x0010061AB8
 
 #define A_GPIO_BASE		    0x0010061A80
 
-#define R_GPIO_CLR_EDGE             0x00
-#define R_GPIO_INT_TYPE             0x08
-#define R_GPIO_INPUT_INVERT         0x10
-#define R_GPIO_GLITCH               0x18
-#define R_GPIO_READ                 0x20
-#define R_GPIO_DIRECTION            0x28
-#define R_GPIO_PIN_CLR              0x30
-#define R_GPIO_PIN_SET              0x38
+#define R_GPIO_CLR_EDGE		    0x00
+#define R_GPIO_INT_TYPE		    0x08
+#define R_GPIO_INPUT_INVERT	    0x10
+#define R_GPIO_GLITCH		    0x18
+#define R_GPIO_READ		    0x20
+#define R_GPIO_DIRECTION	    0x28
+#define R_GPIO_PIN_CLR		    0x30
+#define R_GPIO_PIN_SET		    0x38
 
 /*  *********************************************************************
     * SMBus Registers
     ********************************************************************* */
 
-#define A_SMB_XTRA_0                0x0010060000
-#define A_SMB_XTRA_1                0x0010060008
-#define A_SMB_FREQ_0                0x0010060010
-#define A_SMB_FREQ_1                0x0010060018
-#define A_SMB_STATUS_0              0x0010060020
-#define A_SMB_STATUS_1              0x0010060028
-#define A_SMB_CMD_0                 0x0010060030
-#define A_SMB_CMD_1                 0x0010060038
-#define A_SMB_START_0               0x0010060040
-#define A_SMB_START_1               0x0010060048
-#define A_SMB_DATA_0                0x0010060050
-#define A_SMB_DATA_1                0x0010060058
-#define A_SMB_CONTROL_0             0x0010060060
-#define A_SMB_CONTROL_1             0x0010060068
-#define A_SMB_PEC_0                 0x0010060070
-#define A_SMB_PEC_1                 0x0010060078
+#define A_SMB_XTRA_0		    0x0010060000
+#define A_SMB_XTRA_1		    0x0010060008
+#define A_SMB_FREQ_0		    0x0010060010
+#define A_SMB_FREQ_1		    0x0010060018
+#define A_SMB_STATUS_0		    0x0010060020
+#define A_SMB_STATUS_1		    0x0010060028
+#define A_SMB_CMD_0		    0x0010060030
+#define A_SMB_CMD_1		    0x0010060038
+#define A_SMB_START_0		    0x0010060040
+#define A_SMB_START_1		    0x0010060048
+#define A_SMB_DATA_0		    0x0010060050
+#define A_SMB_DATA_1		    0x0010060058
+#define A_SMB_CONTROL_0		    0x0010060060
+#define A_SMB_CONTROL_1		    0x0010060068
+#define A_SMB_PEC_0		    0x0010060070
+#define A_SMB_PEC_1		    0x0010060078
 
-#define A_SMB_0                     0x0010060000
-#define A_SMB_1                     0x0010060008
-#define SMB_REGISTER_SPACING        0x8
-#define A_SMB_BASE(idx)             (A_SMB_0+(idx)*SMB_REGISTER_SPACING)
+#define A_SMB_0			    0x0010060000
+#define A_SMB_1			    0x0010060008
+#define SMB_REGISTER_SPACING	    0x8
+#define A_SMB_BASE(idx)		    (A_SMB_0+(idx)*SMB_REGISTER_SPACING)
 #define A_SMB_REGISTER(idx, reg)    (A_SMB_BASE(idx)+(reg))
 
-#define R_SMB_XTRA                  0x0000000000
-#define R_SMB_FREQ                  0x0000000010
-#define R_SMB_STATUS                0x0000000020
-#define R_SMB_CMD                   0x0000000030
-#define R_SMB_START                 0x0000000040
-#define R_SMB_DATA                  0x0000000050
-#define R_SMB_CONTROL               0x0000000060
-#define R_SMB_PEC                   0x0000000070
+#define R_SMB_XTRA		    0x0000000000
+#define R_SMB_FREQ		    0x0000000010
+#define R_SMB_STATUS		    0x0000000020
+#define R_SMB_CMD		    0x0000000030
+#define R_SMB_START		    0x0000000040
+#define R_SMB_DATA		    0x0000000050
+#define R_SMB_CONTROL		    0x0000000060
+#define R_SMB_PEC		    0x0000000070
 
 /*  *********************************************************************
     * Timer Registers
@@ -607,55 +607,55 @@
  */
 
 #define A_SCD_WDOG_0		    0x0010020050
-#define A_SCD_WDOG_1                0x0010020150
-#define SCD_WDOG_SPACING            0x100
+#define A_SCD_WDOG_1		    0x0010020150
+#define SCD_WDOG_SPACING	    0x100
 #define SCD_NUM_WDOGS		    2
-#define A_SCD_WDOG_BASE(w)          (A_SCD_WDOG_0+SCD_WDOG_SPACING*(w))
+#define A_SCD_WDOG_BASE(w)	    (A_SCD_WDOG_0+SCD_WDOG_SPACING*(w))
 #define A_SCD_WDOG_REGISTER(w, r)   (A_SCD_WDOG_BASE(w) + (r))
 
 #define R_SCD_WDOG_INIT		    0x0000000000
 #define R_SCD_WDOG_CNT		    0x0000000008
 #define R_SCD_WDOG_CFG		    0x0000000010
 
-#define A_SCD_WDOG_INIT_0           0x0010020050
-#define A_SCD_WDOG_CNT_0            0x0010020058
-#define A_SCD_WDOG_CFG_0            0x0010020060
+#define A_SCD_WDOG_INIT_0	    0x0010020050
+#define A_SCD_WDOG_CNT_0	    0x0010020058
+#define A_SCD_WDOG_CFG_0	    0x0010020060
 
-#define A_SCD_WDOG_INIT_1           0x0010020150
-#define A_SCD_WDOG_CNT_1            0x0010020158
-#define A_SCD_WDOG_CFG_1            0x0010020160
+#define A_SCD_WDOG_INIT_1	    0x0010020150
+#define A_SCD_WDOG_CNT_1	    0x0010020158
+#define A_SCD_WDOG_CFG_1	    0x0010020160
 
 /*
  * Generic timers
  */
 
 #define A_SCD_TIMER_0		    0x0010020070
-#define A_SCD_TIMER_1               0x0010020078
+#define A_SCD_TIMER_1		    0x0010020078
 #define A_SCD_TIMER_2		    0x0010020170
-#define A_SCD_TIMER_3               0x0010020178
+#define A_SCD_TIMER_3		    0x0010020178
 #define SCD_NUM_TIMERS		    4
-#define A_SCD_TIMER_BASE(w)         (A_SCD_TIMER_0+0x08*((w)&1)+0x100*(((w)&2)>>1))
+#define A_SCD_TIMER_BASE(w)	    (A_SCD_TIMER_0+0x08*((w)&1)+0x100*(((w)&2)>>1))
 #define A_SCD_TIMER_REGISTER(w, r)  (A_SCD_TIMER_BASE(w) + (r))
 
 #define R_SCD_TIMER_INIT	    0x0000000000
 #define R_SCD_TIMER_CNT		    0x0000000010
 #define R_SCD_TIMER_CFG		    0x0000000020
 
-#define A_SCD_TIMER_INIT_0          0x0010020070
-#define A_SCD_TIMER_CNT_0           0x0010020080
-#define A_SCD_TIMER_CFG_0           0x0010020090
+#define A_SCD_TIMER_INIT_0	    0x0010020070
+#define A_SCD_TIMER_CNT_0	    0x0010020080
+#define A_SCD_TIMER_CFG_0	    0x0010020090
 
-#define A_SCD_TIMER_INIT_1          0x0010020078
-#define A_SCD_TIMER_CNT_1           0x0010020088
-#define A_SCD_TIMER_CFG_1           0x0010020098
+#define A_SCD_TIMER_INIT_1	    0x0010020078
+#define A_SCD_TIMER_CNT_1	    0x0010020088
+#define A_SCD_TIMER_CFG_1	    0x0010020098
 
-#define A_SCD_TIMER_INIT_2          0x0010020170
-#define A_SCD_TIMER_CNT_2           0x0010020180
-#define A_SCD_TIMER_CFG_2           0x0010020190
+#define A_SCD_TIMER_INIT_2	    0x0010020170
+#define A_SCD_TIMER_CNT_2	    0x0010020180
+#define A_SCD_TIMER_CFG_2	    0x0010020190
 
-#define A_SCD_TIMER_INIT_3          0x0010020178
-#define A_SCD_TIMER_CNT_3           0x0010020188
-#define A_SCD_TIMER_CFG_3           0x0010020198
+#define A_SCD_TIMER_INIT_3	    0x0010020178
+#define A_SCD_TIMER_CNT_3	    0x0010020188
+#define A_SCD_TIMER_CFG_3	    0x0010020198
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define A_SCD_SCRATCH		   0x0010020C10
@@ -671,28 +671,28 @@
     * System Control Registers
     ********************************************************************* */
 
-#define A_SCD_SYSTEM_REVISION       0x0010020000
-#define A_SCD_SYSTEM_CFG            0x0010020008
-#define A_SCD_SYSTEM_MANUF          0x0010038000
+#define A_SCD_SYSTEM_REVISION	    0x0010020000
+#define A_SCD_SYSTEM_CFG	    0x0010020008
+#define A_SCD_SYSTEM_MANUF	    0x0010038000
 
 /*  *********************************************************************
     * System Address Trap Registers
     ********************************************************************* */
 
-#define A_ADDR_TRAP_INDEX           0x00100200B0
-#define A_ADDR_TRAP_REG             0x00100200B8
-#define A_ADDR_TRAP_UP_0            0x0010020400
-#define A_ADDR_TRAP_UP_1            0x0010020408
-#define A_ADDR_TRAP_UP_2            0x0010020410
-#define A_ADDR_TRAP_UP_3            0x0010020418
-#define A_ADDR_TRAP_DOWN_0          0x0010020420
-#define A_ADDR_TRAP_DOWN_1          0x0010020428
-#define A_ADDR_TRAP_DOWN_2          0x0010020430
-#define A_ADDR_TRAP_DOWN_3          0x0010020438
-#define A_ADDR_TRAP_CFG_0           0x0010020440
-#define A_ADDR_TRAP_CFG_1           0x0010020448
-#define A_ADDR_TRAP_CFG_2           0x0010020450
-#define A_ADDR_TRAP_CFG_3           0x0010020458
+#define A_ADDR_TRAP_INDEX	    0x00100200B0
+#define A_ADDR_TRAP_REG		    0x00100200B8
+#define A_ADDR_TRAP_UP_0	    0x0010020400
+#define A_ADDR_TRAP_UP_1	    0x0010020408
+#define A_ADDR_TRAP_UP_2	    0x0010020410
+#define A_ADDR_TRAP_UP_3	    0x0010020418
+#define A_ADDR_TRAP_DOWN_0	    0x0010020420
+#define A_ADDR_TRAP_DOWN_1	    0x0010020428
+#define A_ADDR_TRAP_DOWN_2	    0x0010020430
+#define A_ADDR_TRAP_DOWN_3	    0x0010020438
+#define A_ADDR_TRAP_CFG_0	    0x0010020440
+#define A_ADDR_TRAP_CFG_1	    0x0010020448
+#define A_ADDR_TRAP_CFG_2	    0x0010020450
+#define A_ADDR_TRAP_CFG_3	    0x0010020458
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define A_ADDR_TRAP_REG_DEBUG	    0x0010020460
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
@@ -708,31 +708,31 @@
     * System Interrupt Mapper Registers
     ********************************************************************* */
 
-#define A_IMR_CPU0_BASE                 0x0010020000
-#define A_IMR_CPU1_BASE                 0x0010022000
-#define IMR_REGISTER_SPACING            0x2000
-#define IMR_REGISTER_SPACING_SHIFT      13
+#define A_IMR_CPU0_BASE			0x0010020000
+#define A_IMR_CPU1_BASE			0x0010022000
+#define IMR_REGISTER_SPACING		0x2000
+#define IMR_REGISTER_SPACING_SHIFT	13
 
 #define A_IMR_MAPPER(cpu) (A_IMR_CPU0_BASE+(cpu)*IMR_REGISTER_SPACING)
 #define A_IMR_REGISTER(cpu, reg) (A_IMR_MAPPER(cpu)+(reg))
 
-#define R_IMR_INTERRUPT_DIAG            0x0010
-#define R_IMR_INTERRUPT_LDT             0x0018
-#define R_IMR_INTERRUPT_MASK            0x0028
-#define R_IMR_INTERRUPT_TRACE           0x0038
-#define R_IMR_INTERRUPT_SOURCE_STATUS   0x0040
-#define R_IMR_LDT_INTERRUPT_SET         0x0048
-#define R_IMR_LDT_INTERRUPT             0x0018
-#define R_IMR_LDT_INTERRUPT_CLR         0x0020
-#define R_IMR_MAILBOX_CPU               0x00c0
-#define R_IMR_ALIAS_MAILBOX_CPU         0x1000
-#define R_IMR_MAILBOX_SET_CPU           0x00C8
-#define R_IMR_ALIAS_MAILBOX_SET_CPU     0x1008
-#define R_IMR_MAILBOX_CLR_CPU           0x00D0
-#define R_IMR_INTERRUPT_STATUS_BASE     0x0100
-#define R_IMR_INTERRUPT_STATUS_COUNT    7
-#define R_IMR_INTERRUPT_MAP_BASE        0x0200
-#define R_IMR_INTERRUPT_MAP_COUNT       64
+#define R_IMR_INTERRUPT_DIAG		0x0010
+#define R_IMR_INTERRUPT_LDT		0x0018
+#define R_IMR_INTERRUPT_MASK		0x0028
+#define R_IMR_INTERRUPT_TRACE		0x0038
+#define R_IMR_INTERRUPT_SOURCE_STATUS	0x0040
+#define R_IMR_LDT_INTERRUPT_SET		0x0048
+#define R_IMR_LDT_INTERRUPT		0x0018
+#define R_IMR_LDT_INTERRUPT_CLR		0x0020
+#define R_IMR_MAILBOX_CPU		0x00c0
+#define R_IMR_ALIAS_MAILBOX_CPU		0x1000
+#define R_IMR_MAILBOX_SET_CPU		0x00C8
+#define R_IMR_ALIAS_MAILBOX_SET_CPU	0x1008
+#define R_IMR_MAILBOX_CLR_CPU		0x00D0
+#define R_IMR_INTERRUPT_STATUS_BASE	0x0100
+#define R_IMR_INTERRUPT_STATUS_COUNT	7
+#define R_IMR_INTERRUPT_MAP_BASE	0x0200
+#define R_IMR_INTERRUPT_MAP_COUNT	64
 
 /*
  * these macros work together to build the address of a mailbox
@@ -746,11 +746,11 @@
     * System Performance Counter Registers
     ********************************************************************* */
 
-#define A_SCD_PERF_CNT_CFG          0x00100204C0
-#define A_SCD_PERF_CNT_0            0x00100204D0
-#define A_SCD_PERF_CNT_1            0x00100204D8
-#define A_SCD_PERF_CNT_2            0x00100204E0
-#define A_SCD_PERF_CNT_3            0x00100204E8
+#define A_SCD_PERF_CNT_CFG	    0x00100204C0
+#define A_SCD_PERF_CNT_0	    0x00100204D0
+#define A_SCD_PERF_CNT_1	    0x00100204D8
+#define A_SCD_PERF_CNT_2	    0x00100204E0
+#define A_SCD_PERF_CNT_3	    0x00100204E8
 
 #define SCD_NUM_PERF_CNT 4
 #define SCD_PERF_CNT_SPACING 8
@@ -760,46 +760,46 @@
     * System Bus Watcher Registers
     ********************************************************************* */
 
-#define A_SCD_BUS_ERR_STATUS        0x0010020880
+#define A_SCD_BUS_ERR_STATUS	    0x0010020880
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define A_SCD_BUS_ERR_STATUS_DEBUG  0x00100208D0
-#define A_BUS_ERR_STATUS_DEBUG  0x00100208D0
+#define A_BUS_ERR_STATUS_DEBUG	0x00100208D0
 #endif /* 1250 PASS2 || 112x PASS1 */
-#define A_BUS_ERR_DATA_0            0x00100208A0
-#define A_BUS_ERR_DATA_1            0x00100208A8
-#define A_BUS_ERR_DATA_2            0x00100208B0
-#define A_BUS_ERR_DATA_3            0x00100208B8
-#define A_BUS_L2_ERRORS             0x00100208C0
-#define A_BUS_MEM_IO_ERRORS         0x00100208C8
+#define A_BUS_ERR_DATA_0	    0x00100208A0
+#define A_BUS_ERR_DATA_1	    0x00100208A8
+#define A_BUS_ERR_DATA_2	    0x00100208B0
+#define A_BUS_ERR_DATA_3	    0x00100208B8
+#define A_BUS_L2_ERRORS		    0x00100208C0
+#define A_BUS_MEM_IO_ERRORS	    0x00100208C8
 
 /*  *********************************************************************
     * System Debug Controller Registers
     ********************************************************************* */
 
-#define A_SCD_JTAG_BASE             0x0010000000
+#define A_SCD_JTAG_BASE		    0x0010000000
 
 /*  *********************************************************************
     * System Trace Buffer Registers
     ********************************************************************* */
 
-#define A_SCD_TRACE_CFG             0x0010020A00
-#define A_SCD_TRACE_READ            0x0010020A08
-#define A_SCD_TRACE_EVENT_0         0x0010020A20
-#define A_SCD_TRACE_EVENT_1         0x0010020A28
-#define A_SCD_TRACE_EVENT_2         0x0010020A30
-#define A_SCD_TRACE_EVENT_3         0x0010020A38
-#define A_SCD_TRACE_SEQUENCE_0      0x0010020A40
-#define A_SCD_TRACE_SEQUENCE_1      0x0010020A48
-#define A_SCD_TRACE_SEQUENCE_2      0x0010020A50
-#define A_SCD_TRACE_SEQUENCE_3      0x0010020A58
-#define A_SCD_TRACE_EVENT_4         0x0010020A60
-#define A_SCD_TRACE_EVENT_5         0x0010020A68
-#define A_SCD_TRACE_EVENT_6         0x0010020A70
-#define A_SCD_TRACE_EVENT_7         0x0010020A78
-#define A_SCD_TRACE_SEQUENCE_4      0x0010020A80
-#define A_SCD_TRACE_SEQUENCE_5      0x0010020A88
-#define A_SCD_TRACE_SEQUENCE_6      0x0010020A90
-#define A_SCD_TRACE_SEQUENCE_7      0x0010020A98
+#define A_SCD_TRACE_CFG		    0x0010020A00
+#define A_SCD_TRACE_READ	    0x0010020A08
+#define A_SCD_TRACE_EVENT_0	    0x0010020A20
+#define A_SCD_TRACE_EVENT_1	    0x0010020A28
+#define A_SCD_TRACE_EVENT_2	    0x0010020A30
+#define A_SCD_TRACE_EVENT_3	    0x0010020A38
+#define A_SCD_TRACE_SEQUENCE_0	    0x0010020A40
+#define A_SCD_TRACE_SEQUENCE_1	    0x0010020A48
+#define A_SCD_TRACE_SEQUENCE_2	    0x0010020A50
+#define A_SCD_TRACE_SEQUENCE_3	    0x0010020A58
+#define A_SCD_TRACE_EVENT_4	    0x0010020A60
+#define A_SCD_TRACE_EVENT_5	    0x0010020A68
+#define A_SCD_TRACE_EVENT_6	    0x0010020A70
+#define A_SCD_TRACE_EVENT_7	    0x0010020A78
+#define A_SCD_TRACE_SEQUENCE_4	    0x0010020A80
+#define A_SCD_TRACE_SEQUENCE_5	    0x0010020A88
+#define A_SCD_TRACE_SEQUENCE_6	    0x0010020A90
+#define A_SCD_TRACE_SEQUENCE_7	    0x0010020A98
 
 #define TRACE_REGISTER_SPACING 8
 #define TRACE_NUM_REGISTERS    8
@@ -814,8 +814,8 @@
     * System Generic DMA Registers
     ********************************************************************* */
 
-#define A_DM_0		  	    0x0010020B00
-#define A_DM_1		  	    0x0010020B20
+#define A_DM_0			    0x0010020B00
+#define A_DM_1			    0x0010020B20
 #define A_DM_2			    0x0010020B40
 #define A_DM_3			    0x0010020B60
 #define DM_REGISTER_SPACING	    0x20
@@ -854,39 +854,39 @@
     ********************************************************************* */
 
 #if SIBYTE_HDR_FEATURE_1250_112x
-#define A_PHYS_MEMORY_0                 _SB_MAKE64(0x0000000000)
-#define A_PHYS_MEMORY_SIZE              _SB_MAKE64((256*1024*1024))
-#define A_PHYS_SYSTEM_CTL               _SB_MAKE64(0x0010000000)
-#define A_PHYS_IO_SYSTEM                _SB_MAKE64(0x0010060000)
+#define A_PHYS_MEMORY_0			_SB_MAKE64(0x0000000000)
+#define A_PHYS_MEMORY_SIZE		_SB_MAKE64((256*1024*1024))
+#define A_PHYS_SYSTEM_CTL		_SB_MAKE64(0x0010000000)
+#define A_PHYS_IO_SYSTEM		_SB_MAKE64(0x0010060000)
 #define A_PHYS_GENBUS			_SB_MAKE64(0x0010090000)
 #define A_PHYS_GENBUS_END		_SB_MAKE64(0x0040000000)
 #define A_PHYS_LDTPCI_IO_MATCH_BYTES_32 _SB_MAKE64(0x0040000000)
-#define A_PHYS_LDTPCI_IO_MATCH_BITS_32  _SB_MAKE64(0x0060000000)
-#define A_PHYS_MEMORY_1                 _SB_MAKE64(0x0080000000)
-#define A_PHYS_MEMORY_2                 _SB_MAKE64(0x0090000000)
-#define A_PHYS_MEMORY_3                 _SB_MAKE64(0x00C0000000)
-#define A_PHYS_L2_CACHE_TEST            _SB_MAKE64(0x00D0000000)
-#define A_PHYS_LDT_SPECIAL_MATCH_BYTES  _SB_MAKE64(0x00D8000000)
-#define A_PHYS_LDTPCI_IO_MATCH_BYTES    _SB_MAKE64(0x00DC000000)
-#define A_PHYS_LDTPCI_CFG_MATCH_BYTES   _SB_MAKE64(0x00DE000000)
-#define A_PHYS_LDT_SPECIAL_MATCH_BITS   _SB_MAKE64(0x00F8000000)
-#define A_PHYS_LDTPCI_IO_MATCH_BITS     _SB_MAKE64(0x00FC000000)
-#define A_PHYS_LDTPCI_CFG_MATCH_BITS    _SB_MAKE64(0x00FE000000)
-#define A_PHYS_MEMORY_EXP               _SB_MAKE64(0x0100000000)
-#define A_PHYS_MEMORY_EXP_SIZE          _SB_MAKE64((508*1024*1024*1024))
-#define A_PHYS_LDT_EXP                  _SB_MAKE64(0x8000000000)
-#define A_PHYS_PCI_FULLACCESS_BYTES     _SB_MAKE64(0xF000000000)
-#define A_PHYS_PCI_FULLACCESS_BITS      _SB_MAKE64(0xF100000000)
-#define A_PHYS_RESERVED                 _SB_MAKE64(0xF200000000)
-#define A_PHYS_RESERVED_SPECIAL_LDT     _SB_MAKE64(0xFD00000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BITS_32	_SB_MAKE64(0x0060000000)
+#define A_PHYS_MEMORY_1			_SB_MAKE64(0x0080000000)
+#define A_PHYS_MEMORY_2			_SB_MAKE64(0x0090000000)
+#define A_PHYS_MEMORY_3			_SB_MAKE64(0x00C0000000)
+#define A_PHYS_L2_CACHE_TEST		_SB_MAKE64(0x00D0000000)
+#define A_PHYS_LDT_SPECIAL_MATCH_BYTES	_SB_MAKE64(0x00D8000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BYTES	_SB_MAKE64(0x00DC000000)
+#define A_PHYS_LDTPCI_CFG_MATCH_BYTES	_SB_MAKE64(0x00DE000000)
+#define A_PHYS_LDT_SPECIAL_MATCH_BITS	_SB_MAKE64(0x00F8000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BITS	_SB_MAKE64(0x00FC000000)
+#define A_PHYS_LDTPCI_CFG_MATCH_BITS	_SB_MAKE64(0x00FE000000)
+#define A_PHYS_MEMORY_EXP		_SB_MAKE64(0x0100000000)
+#define A_PHYS_MEMORY_EXP_SIZE		_SB_MAKE64((508*1024*1024*1024))
+#define A_PHYS_LDT_EXP			_SB_MAKE64(0x8000000000)
+#define A_PHYS_PCI_FULLACCESS_BYTES	_SB_MAKE64(0xF000000000)
+#define A_PHYS_PCI_FULLACCESS_BITS	_SB_MAKE64(0xF100000000)
+#define A_PHYS_RESERVED			_SB_MAKE64(0xF200000000)
+#define A_PHYS_RESERVED_SPECIAL_LDT	_SB_MAKE64(0xFD00000000)
 
-#define A_PHYS_L2CACHE_WAY_SIZE         _SB_MAKE64(0x0000020000)
-#define PHYS_L2CACHE_NUM_WAYS           4
-#define A_PHYS_L2CACHE_TOTAL_SIZE       _SB_MAKE64(0x0000080000)
-#define A_PHYS_L2CACHE_WAY0             _SB_MAKE64(0x00D0180000)
-#define A_PHYS_L2CACHE_WAY1             _SB_MAKE64(0x00D01A0000)
-#define A_PHYS_L2CACHE_WAY2             _SB_MAKE64(0x00D01C0000)
-#define A_PHYS_L2CACHE_WAY3             _SB_MAKE64(0x00D01E0000)
+#define A_PHYS_L2CACHE_WAY_SIZE		_SB_MAKE64(0x0000020000)
+#define PHYS_L2CACHE_NUM_WAYS		4
+#define A_PHYS_L2CACHE_TOTAL_SIZE	_SB_MAKE64(0x0000080000)
+#define A_PHYS_L2CACHE_WAY0		_SB_MAKE64(0x00D0180000)
+#define A_PHYS_L2CACHE_WAY1		_SB_MAKE64(0x00D01A0000)
+#define A_PHYS_L2CACHE_WAY2		_SB_MAKE64(0x00D01C0000)
+#define A_PHYS_L2CACHE_WAY3		_SB_MAKE64(0x00D01E0000)
 #endif
 
 
diff --git a/arch/mips/include/asm/sibyte/sb1250_scd.h b/arch/mips/include/asm/sibyte/sb1250_scd.h
index 615e165..d725f2f 100644
--- a/arch/mips/include/asm/sibyte/sb1250_scd.h
+++ b/arch/mips/include/asm/sibyte/sb1250_scd.h
@@ -44,10 +44,10 @@
 
 #define M_SYS_RESERVED		    _SB_MAKEMASK(8, 0)
 
-#define S_SYS_REVISION              _SB_MAKE64(8)
-#define M_SYS_REVISION              _SB_MAKEMASK(8, S_SYS_REVISION)
-#define V_SYS_REVISION(x)           _SB_MAKEVALUE(x, S_SYS_REVISION)
-#define G_SYS_REVISION(x)           _SB_GETVALUE(x, S_SYS_REVISION, M_SYS_REVISION)
+#define S_SYS_REVISION		    _SB_MAKE64(8)
+#define M_SYS_REVISION		    _SB_MAKEMASK(8, S_SYS_REVISION)
+#define V_SYS_REVISION(x)	    _SB_MAKEVALUE(x, S_SYS_REVISION)
+#define G_SYS_REVISION(x)	    _SB_GETVALUE(x, S_SYS_REVISION, M_SYS_REVISION)
 
 #define K_SYS_REVISION_BCM1250_PASS1	0x01
 
@@ -93,10 +93,10 @@
 #define K_SYS_REVISION_BCM1480_B0	0x11
 
 /*Cache size - 23:20  of revision register*/
-#define S_SYS_L2C_SIZE            _SB_MAKE64(20)
-#define M_SYS_L2C_SIZE            _SB_MAKEMASK(4, S_SYS_L2C_SIZE)
-#define V_SYS_L2C_SIZE(x)         _SB_MAKEVALUE(x, S_SYS_L2C_SIZE)
-#define G_SYS_L2C_SIZE(x)         _SB_GETVALUE(x, S_SYS_L2C_SIZE, M_SYS_L2C_SIZE)
+#define S_SYS_L2C_SIZE		  _SB_MAKE64(20)
+#define M_SYS_L2C_SIZE		  _SB_MAKEMASK(4, S_SYS_L2C_SIZE)
+#define V_SYS_L2C_SIZE(x)	  _SB_MAKEVALUE(x, S_SYS_L2C_SIZE)
+#define G_SYS_L2C_SIZE(x)	  _SB_GETVALUE(x, S_SYS_L2C_SIZE, M_SYS_L2C_SIZE)
 
 #define K_SYS_L2C_SIZE_1MB	0
 #define K_SYS_L2C_SIZE_512KB	5
@@ -109,40 +109,40 @@
 
 
 /* Number of CPU cores, bits 27:24  of revision register*/
-#define S_SYS_NUM_CPUS            _SB_MAKE64(24)
-#define M_SYS_NUM_CPUS            _SB_MAKEMASK(4, S_SYS_NUM_CPUS)
-#define V_SYS_NUM_CPUS(x)         _SB_MAKEVALUE(x, S_SYS_NUM_CPUS)
-#define G_SYS_NUM_CPUS(x)         _SB_GETVALUE(x, S_SYS_NUM_CPUS, M_SYS_NUM_CPUS)
+#define S_SYS_NUM_CPUS		  _SB_MAKE64(24)
+#define M_SYS_NUM_CPUS		  _SB_MAKEMASK(4, S_SYS_NUM_CPUS)
+#define V_SYS_NUM_CPUS(x)	  _SB_MAKEVALUE(x, S_SYS_NUM_CPUS)
+#define G_SYS_NUM_CPUS(x)	  _SB_GETVALUE(x, S_SYS_NUM_CPUS, M_SYS_NUM_CPUS)
 
 
 /* XXX: discourage people from using these constants.  */
-#define S_SYS_PART                  _SB_MAKE64(16)
-#define M_SYS_PART                  _SB_MAKEMASK(16, S_SYS_PART)
-#define V_SYS_PART(x)               _SB_MAKEVALUE(x, S_SYS_PART)
-#define G_SYS_PART(x)               _SB_GETVALUE(x, S_SYS_PART, M_SYS_PART)
+#define S_SYS_PART		    _SB_MAKE64(16)
+#define M_SYS_PART		    _SB_MAKEMASK(16, S_SYS_PART)
+#define V_SYS_PART(x)		    _SB_MAKEVALUE(x, S_SYS_PART)
+#define G_SYS_PART(x)		    _SB_GETVALUE(x, S_SYS_PART, M_SYS_PART)
 
 /* XXX: discourage people from using these constants.  */
-#define K_SYS_PART_SB1250           0x1250
-#define K_SYS_PART_BCM1120          0x1121
-#define K_SYS_PART_BCM1125          0x1123
-#define K_SYS_PART_BCM1125H         0x1124
-#define K_SYS_PART_BCM1122          0x1113
+#define K_SYS_PART_SB1250	    0x1250
+#define K_SYS_PART_BCM1120	    0x1121
+#define K_SYS_PART_BCM1125	    0x1123
+#define K_SYS_PART_BCM1125H	    0x1124
+#define K_SYS_PART_BCM1122	    0x1113
 
 
 /* The "peripheral set" (SOC type) is the low 4 bits of the "part" field.  */
-#define S_SYS_SOC_TYPE              _SB_MAKE64(16)
-#define M_SYS_SOC_TYPE              _SB_MAKEMASK(4, S_SYS_SOC_TYPE)
-#define V_SYS_SOC_TYPE(x)           _SB_MAKEVALUE(x, S_SYS_SOC_TYPE)
-#define G_SYS_SOC_TYPE(x)           _SB_GETVALUE(x, S_SYS_SOC_TYPE, M_SYS_SOC_TYPE)
+#define S_SYS_SOC_TYPE		    _SB_MAKE64(16)
+#define M_SYS_SOC_TYPE		    _SB_MAKEMASK(4, S_SYS_SOC_TYPE)
+#define V_SYS_SOC_TYPE(x)	    _SB_MAKEVALUE(x, S_SYS_SOC_TYPE)
+#define G_SYS_SOC_TYPE(x)	    _SB_GETVALUE(x, S_SYS_SOC_TYPE, M_SYS_SOC_TYPE)
 
-#define K_SYS_SOC_TYPE_BCM1250      0x0
-#define K_SYS_SOC_TYPE_BCM1120      0x1
-#define K_SYS_SOC_TYPE_BCM1250_ALT  0x2		/* 1250pass2 w/ 1/4 L2.  */
-#define K_SYS_SOC_TYPE_BCM1125      0x3
-#define K_SYS_SOC_TYPE_BCM1125H     0x4
-#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5		/* 1250pass2 w/ 1/2 L2.  */
-#define K_SYS_SOC_TYPE_BCM1x80      0x6
-#define K_SYS_SOC_TYPE_BCM1x55      0x7
+#define K_SYS_SOC_TYPE_BCM1250	    0x0
+#define K_SYS_SOC_TYPE_BCM1120	    0x1
+#define K_SYS_SOC_TYPE_BCM1250_ALT  0x2		/* 1250pass2 w/ 1/4 L2.	 */
+#define K_SYS_SOC_TYPE_BCM1125	    0x3
+#define K_SYS_SOC_TYPE_BCM1125H	    0x4
+#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5		/* 1250pass2 w/ 1/2 L2.	 */
+#define K_SYS_SOC_TYPE_BCM1x80	    0x6
+#define K_SYS_SOC_TYPE_BCM1x55	    0x7
 
 /*
  * Calculate correct SOC type given a copy of system revision register.
@@ -169,10 +169,10 @@
 	 ? K_SYS_SOC_TYPE_BCM1250 : G_SYS_SOC_TYPE(sysrev))
 #endif
 
-#define S_SYS_WID                   _SB_MAKE64(32)
-#define M_SYS_WID                   _SB_MAKEMASK(32, S_SYS_WID)
-#define V_SYS_WID(x)                _SB_MAKEVALUE(x, S_SYS_WID)
-#define G_SYS_WID(x)                _SB_GETVALUE(x, S_SYS_WID, M_SYS_WID)
+#define S_SYS_WID		    _SB_MAKE64(32)
+#define M_SYS_WID		    _SB_MAKEMASK(32, S_SYS_WID)
+#define V_SYS_WID(x)		    _SB_MAKEVALUE(x, S_SYS_WID)
+#define G_SYS_WID(x)		    _SB_GETVALUE(x, S_SYS_WID, M_SYS_WID)
 
 /*
  * System Manufacturing Register
@@ -181,37 +181,37 @@
 
 #if SIBYTE_HDR_FEATURE_1250_112x
 /* Wafer ID: bits 31:0 */
-#define S_SYS_WAFERID1_200        _SB_MAKE64(0)
-#define M_SYS_WAFERID1_200        _SB_MAKEMASK(32, S_SYS_WAFERID1_200)
-#define V_SYS_WAFERID1_200(x)     _SB_MAKEVALUE(x, S_SYS_WAFERID1_200)
-#define G_SYS_WAFERID1_200(x)     _SB_GETVALUE(x, S_SYS_WAFERID1_200, M_SYS_WAFERID1_200)
+#define S_SYS_WAFERID1_200	  _SB_MAKE64(0)
+#define M_SYS_WAFERID1_200	  _SB_MAKEMASK(32, S_SYS_WAFERID1_200)
+#define V_SYS_WAFERID1_200(x)	  _SB_MAKEVALUE(x, S_SYS_WAFERID1_200)
+#define G_SYS_WAFERID1_200(x)	  _SB_GETVALUE(x, S_SYS_WAFERID1_200, M_SYS_WAFERID1_200)
 
-#define S_SYS_BIN                 _SB_MAKE64(32)
-#define M_SYS_BIN                 _SB_MAKEMASK(4, S_SYS_BIN)
-#define V_SYS_BIN(x)              _SB_MAKEVALUE(x, S_SYS_BIN)
-#define G_SYS_BIN(x)              _SB_GETVALUE(x, S_SYS_BIN, M_SYS_BIN)
+#define S_SYS_BIN		  _SB_MAKE64(32)
+#define M_SYS_BIN		  _SB_MAKEMASK(4, S_SYS_BIN)
+#define V_SYS_BIN(x)		  _SB_MAKEVALUE(x, S_SYS_BIN)
+#define G_SYS_BIN(x)		  _SB_GETVALUE(x, S_SYS_BIN, M_SYS_BIN)
 
 /* Wafer ID: bits 39:36 */
-#define S_SYS_WAFERID2_200        _SB_MAKE64(36)
-#define M_SYS_WAFERID2_200        _SB_MAKEMASK(4, S_SYS_WAFERID2_200)
-#define V_SYS_WAFERID2_200(x)     _SB_MAKEVALUE(x, S_SYS_WAFERID2_200)
-#define G_SYS_WAFERID2_200(x)     _SB_GETVALUE(x, S_SYS_WAFERID2_200, M_SYS_WAFERID2_200)
+#define S_SYS_WAFERID2_200	  _SB_MAKE64(36)
+#define M_SYS_WAFERID2_200	  _SB_MAKEMASK(4, S_SYS_WAFERID2_200)
+#define V_SYS_WAFERID2_200(x)	  _SB_MAKEVALUE(x, S_SYS_WAFERID2_200)
+#define G_SYS_WAFERID2_200(x)	  _SB_GETVALUE(x, S_SYS_WAFERID2_200, M_SYS_WAFERID2_200)
 
 /* Wafer ID: bits 39:0 */
-#define S_SYS_WAFERID_300         _SB_MAKE64(0)
-#define M_SYS_WAFERID_300         _SB_MAKEMASK(40, S_SYS_WAFERID_300)
-#define V_SYS_WAFERID_300(x)      _SB_MAKEVALUE(x, S_SYS_WAFERID_300)
-#define G_SYS_WAFERID_300(x)      _SB_GETVALUE(x, S_SYS_WAFERID_300, M_SYS_WAFERID_300)
+#define S_SYS_WAFERID_300	  _SB_MAKE64(0)
+#define M_SYS_WAFERID_300	  _SB_MAKEMASK(40, S_SYS_WAFERID_300)
+#define V_SYS_WAFERID_300(x)	  _SB_MAKEVALUE(x, S_SYS_WAFERID_300)
+#define G_SYS_WAFERID_300(x)	  _SB_GETVALUE(x, S_SYS_WAFERID_300, M_SYS_WAFERID_300)
 
-#define S_SYS_XPOS                _SB_MAKE64(40)
-#define M_SYS_XPOS                _SB_MAKEMASK(6, S_SYS_XPOS)
-#define V_SYS_XPOS(x)             _SB_MAKEVALUE(x, S_SYS_XPOS)
-#define G_SYS_XPOS(x)             _SB_GETVALUE(x, S_SYS_XPOS, M_SYS_XPOS)
+#define S_SYS_XPOS		  _SB_MAKE64(40)
+#define M_SYS_XPOS		  _SB_MAKEMASK(6, S_SYS_XPOS)
+#define V_SYS_XPOS(x)		  _SB_MAKEVALUE(x, S_SYS_XPOS)
+#define G_SYS_XPOS(x)		  _SB_GETVALUE(x, S_SYS_XPOS, M_SYS_XPOS)
 
-#define S_SYS_YPOS                _SB_MAKE64(46)
-#define M_SYS_YPOS                _SB_MAKEMASK(6, S_SYS_YPOS)
-#define V_SYS_YPOS(x)             _SB_MAKEVALUE(x, S_SYS_YPOS)
-#define G_SYS_YPOS(x)             _SB_GETVALUE(x, S_SYS_YPOS, M_SYS_YPOS)
+#define S_SYS_YPOS		  _SB_MAKE64(46)
+#define M_SYS_YPOS		  _SB_MAKEMASK(6, S_SYS_YPOS)
+#define V_SYS_YPOS(x)		  _SB_MAKEVALUE(x, S_SYS_YPOS)
+#define G_SYS_YPOS(x)		  _SB_GETVALUE(x, S_SYS_YPOS, M_SYS_YPOS)
 #endif
 
 
@@ -221,55 +221,55 @@
  */
 
 #if SIBYTE_HDR_FEATURE_1250_112x
-#define M_SYS_LDT_PLL_BYP           _SB_MAKEMASK1(3)
+#define M_SYS_LDT_PLL_BYP	    _SB_MAKEMASK1(3)
 #define M_SYS_PCI_SYNC_TEST_MODE    _SB_MAKEMASK1(4)
-#define M_SYS_IOB0_DIV              _SB_MAKEMASK1(5)
-#define M_SYS_IOB1_DIV              _SB_MAKEMASK1(6)
+#define M_SYS_IOB0_DIV		    _SB_MAKEMASK1(5)
+#define M_SYS_IOB1_DIV		    _SB_MAKEMASK1(6)
 
-#define S_SYS_PLL_DIV               _SB_MAKE64(7)
-#define M_SYS_PLL_DIV               _SB_MAKEMASK(5, S_SYS_PLL_DIV)
-#define V_SYS_PLL_DIV(x)            _SB_MAKEVALUE(x, S_SYS_PLL_DIV)
-#define G_SYS_PLL_DIV(x)            _SB_GETVALUE(x, S_SYS_PLL_DIV, M_SYS_PLL_DIV)
+#define S_SYS_PLL_DIV		    _SB_MAKE64(7)
+#define M_SYS_PLL_DIV		    _SB_MAKEMASK(5, S_SYS_PLL_DIV)
+#define V_SYS_PLL_DIV(x)	    _SB_MAKEVALUE(x, S_SYS_PLL_DIV)
+#define G_SYS_PLL_DIV(x)	    _SB_GETVALUE(x, S_SYS_PLL_DIV, M_SYS_PLL_DIV)
 
-#define M_SYS_SER0_ENABLE           _SB_MAKEMASK1(12)
-#define M_SYS_SER0_RSTB_EN          _SB_MAKEMASK1(13)
-#define M_SYS_SER1_ENABLE           _SB_MAKEMASK1(14)
-#define M_SYS_SER1_RSTB_EN          _SB_MAKEMASK1(15)
-#define M_SYS_PCMCIA_ENABLE         _SB_MAKEMASK1(16)
+#define M_SYS_SER0_ENABLE	    _SB_MAKEMASK1(12)
+#define M_SYS_SER0_RSTB_EN	    _SB_MAKEMASK1(13)
+#define M_SYS_SER1_ENABLE	    _SB_MAKEMASK1(14)
+#define M_SYS_SER1_RSTB_EN	    _SB_MAKEMASK1(15)
+#define M_SYS_PCMCIA_ENABLE	    _SB_MAKEMASK1(16)
 
-#define S_SYS_BOOT_MODE             _SB_MAKE64(17)
-#define M_SYS_BOOT_MODE             _SB_MAKEMASK(2, S_SYS_BOOT_MODE)
-#define V_SYS_BOOT_MODE(x)          _SB_MAKEVALUE(x, S_SYS_BOOT_MODE)
-#define G_SYS_BOOT_MODE(x)          _SB_GETVALUE(x, S_SYS_BOOT_MODE, M_SYS_BOOT_MODE)
-#define K_SYS_BOOT_MODE_ROM32       0
-#define K_SYS_BOOT_MODE_ROM8        1
+#define S_SYS_BOOT_MODE		    _SB_MAKE64(17)
+#define M_SYS_BOOT_MODE		    _SB_MAKEMASK(2, S_SYS_BOOT_MODE)
+#define V_SYS_BOOT_MODE(x)	    _SB_MAKEVALUE(x, S_SYS_BOOT_MODE)
+#define G_SYS_BOOT_MODE(x)	    _SB_GETVALUE(x, S_SYS_BOOT_MODE, M_SYS_BOOT_MODE)
+#define K_SYS_BOOT_MODE_ROM32	    0
+#define K_SYS_BOOT_MODE_ROM8	    1
 #define K_SYS_BOOT_MODE_SMBUS_SMALL 2
 #define K_SYS_BOOT_MODE_SMBUS_BIG   3
 
-#define M_SYS_PCI_HOST              _SB_MAKEMASK1(19)
-#define M_SYS_PCI_ARBITER           _SB_MAKEMASK1(20)
-#define M_SYS_SOUTH_ON_LDT          _SB_MAKEMASK1(21)
-#define M_SYS_BIG_ENDIAN            _SB_MAKEMASK1(22)
-#define M_SYS_GENCLK_EN             _SB_MAKEMASK1(23)
-#define M_SYS_LDT_TEST_EN           _SB_MAKEMASK1(24)
-#define M_SYS_GEN_PARITY_EN         _SB_MAKEMASK1(25)
+#define M_SYS_PCI_HOST		    _SB_MAKEMASK1(19)
+#define M_SYS_PCI_ARBITER	    _SB_MAKEMASK1(20)
+#define M_SYS_SOUTH_ON_LDT	    _SB_MAKEMASK1(21)
+#define M_SYS_BIG_ENDIAN	    _SB_MAKEMASK1(22)
+#define M_SYS_GENCLK_EN		    _SB_MAKEMASK1(23)
+#define M_SYS_LDT_TEST_EN	    _SB_MAKEMASK1(24)
+#define M_SYS_GEN_PARITY_EN	    _SB_MAKEMASK1(25)
 
-#define S_SYS_CONFIG                26
-#define M_SYS_CONFIG                _SB_MAKEMASK(6, S_SYS_CONFIG)
-#define V_SYS_CONFIG(x)             _SB_MAKEVALUE(x, S_SYS_CONFIG)
-#define G_SYS_CONFIG(x)             _SB_GETVALUE(x, S_SYS_CONFIG, M_SYS_CONFIG)
+#define S_SYS_CONFIG		    26
+#define M_SYS_CONFIG		    _SB_MAKEMASK(6, S_SYS_CONFIG)
+#define V_SYS_CONFIG(x)		    _SB_MAKEVALUE(x, S_SYS_CONFIG)
+#define G_SYS_CONFIG(x)		    _SB_GETVALUE(x, S_SYS_CONFIG, M_SYS_CONFIG)
 
 /* The following bits are writeable by JTAG only. */
 
-#define M_SYS_CLKSTOP               _SB_MAKEMASK1(32)
-#define M_SYS_CLKSTEP               _SB_MAKEMASK1(33)
+#define M_SYS_CLKSTOP		    _SB_MAKEMASK1(32)
+#define M_SYS_CLKSTEP		    _SB_MAKEMASK1(33)
 
-#define S_SYS_CLKCOUNT              34
-#define M_SYS_CLKCOUNT              _SB_MAKEMASK(8, S_SYS_CLKCOUNT)
-#define V_SYS_CLKCOUNT(x)           _SB_MAKEVALUE(x, S_SYS_CLKCOUNT)
-#define G_SYS_CLKCOUNT(x)           _SB_GETVALUE(x, S_SYS_CLKCOUNT, M_SYS_CLKCOUNT)
+#define S_SYS_CLKCOUNT		    34
+#define M_SYS_CLKCOUNT		    _SB_MAKEMASK(8, S_SYS_CLKCOUNT)
+#define V_SYS_CLKCOUNT(x)	    _SB_MAKEVALUE(x, S_SYS_CLKCOUNT)
+#define G_SYS_CLKCOUNT(x)	    _SB_GETVALUE(x, S_SYS_CLKCOUNT, M_SYS_CLKCOUNT)
 
-#define M_SYS_PLL_BYPASS            _SB_MAKEMASK1(42)
+#define M_SYS_PLL_BYPASS	    _SB_MAKEMASK1(42)
 
 #define S_SYS_PLL_IREF		    43
 #define M_SYS_PLL_IREF		    _SB_MAKEMASK(2, S_SYS_PLL_IREF)
@@ -280,26 +280,26 @@
 #define S_SYS_PLL_VREG		    47
 #define M_SYS_PLL_VREG		    _SB_MAKEMASK(2, S_SYS_PLL_VREG)
 
-#define M_SYS_MEM_RESET             _SB_MAKEMASK1(49)
-#define M_SYS_L2C_RESET             _SB_MAKEMASK1(50)
-#define M_SYS_IO_RESET_0            _SB_MAKEMASK1(51)
-#define M_SYS_IO_RESET_1            _SB_MAKEMASK1(52)
-#define M_SYS_SCD_RESET             _SB_MAKEMASK1(53)
+#define M_SYS_MEM_RESET		    _SB_MAKEMASK1(49)
+#define M_SYS_L2C_RESET		    _SB_MAKEMASK1(50)
+#define M_SYS_IO_RESET_0	    _SB_MAKEMASK1(51)
+#define M_SYS_IO_RESET_1	    _SB_MAKEMASK1(52)
+#define M_SYS_SCD_RESET		    _SB_MAKEMASK1(53)
 
 /* End of bits writable by JTAG only. */
 
-#define M_SYS_CPU_RESET_0           _SB_MAKEMASK1(54)
-#define M_SYS_CPU_RESET_1           _SB_MAKEMASK1(55)
+#define M_SYS_CPU_RESET_0	    _SB_MAKEMASK1(54)
+#define M_SYS_CPU_RESET_1	    _SB_MAKEMASK1(55)
 
-#define M_SYS_UNICPU0               _SB_MAKEMASK1(56)
-#define M_SYS_UNICPU1               _SB_MAKEMASK1(57)
+#define M_SYS_UNICPU0		    _SB_MAKEMASK1(56)
+#define M_SYS_UNICPU1		    _SB_MAKEMASK1(57)
 
-#define M_SYS_SB_SOFTRES            _SB_MAKEMASK1(58)
-#define M_SYS_EXT_RESET             _SB_MAKEMASK1(59)
-#define M_SYS_SYSTEM_RESET          _SB_MAKEMASK1(60)
+#define M_SYS_SB_SOFTRES	    _SB_MAKEMASK1(58)
+#define M_SYS_EXT_RESET		    _SB_MAKEMASK1(59)
+#define M_SYS_SYSTEM_RESET	    _SB_MAKEMASK1(60)
 
-#define M_SYS_MISR_MODE             _SB_MAKEMASK1(61)
-#define M_SYS_MISR_RESET            _SB_MAKEMASK1(62)
+#define M_SYS_MISR_MODE		    _SB_MAKEMASK1(61)
+#define M_SYS_MISR_RESET	    _SB_MAKEMASK1(62)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define M_SYS_SW_FLAG		    _SB_MAKEMASK1(63)
@@ -313,46 +313,46 @@
  * Registers: SCD_MBOX_CPU_x
  */
 
-#define S_MBOX_INT_3                0
-#define M_MBOX_INT_3                _SB_MAKEMASK(16, S_MBOX_INT_3)
-#define S_MBOX_INT_2                16
-#define M_MBOX_INT_2                _SB_MAKEMASK(16, S_MBOX_INT_2)
-#define S_MBOX_INT_1                32
-#define M_MBOX_INT_1                _SB_MAKEMASK(16, S_MBOX_INT_1)
-#define S_MBOX_INT_0                48
-#define M_MBOX_INT_0                _SB_MAKEMASK(16, S_MBOX_INT_0)
+#define S_MBOX_INT_3		    0
+#define M_MBOX_INT_3		    _SB_MAKEMASK(16, S_MBOX_INT_3)
+#define S_MBOX_INT_2		    16
+#define M_MBOX_INT_2		    _SB_MAKEMASK(16, S_MBOX_INT_2)
+#define S_MBOX_INT_1		    32
+#define M_MBOX_INT_1		    _SB_MAKEMASK(16, S_MBOX_INT_1)
+#define S_MBOX_INT_0		    48
+#define M_MBOX_INT_0		    _SB_MAKEMASK(16, S_MBOX_INT_0)
 
 /*
  * Watchdog Registers (Table 4-8) (Table 4-9) (Table 4-10)
  * Registers: SCD_WDOG_INIT_CNT_x
  */
 
-#define V_SCD_WDOG_FREQ             1000000
+#define V_SCD_WDOG_FREQ		    1000000
 
-#define S_SCD_WDOG_INIT             0
-#define M_SCD_WDOG_INIT             _SB_MAKEMASK(23, S_SCD_WDOG_INIT)
+#define S_SCD_WDOG_INIT		    0
+#define M_SCD_WDOG_INIT		    _SB_MAKEMASK(23, S_SCD_WDOG_INIT)
 
-#define S_SCD_WDOG_CNT              0
-#define M_SCD_WDOG_CNT              _SB_MAKEMASK(23, S_SCD_WDOG_CNT)
+#define S_SCD_WDOG_CNT		    0
+#define M_SCD_WDOG_CNT		    _SB_MAKEMASK(23, S_SCD_WDOG_CNT)
 
-#define S_SCD_WDOG_ENABLE           0
-#define M_SCD_WDOG_ENABLE           _SB_MAKEMASK1(S_SCD_WDOG_ENABLE)
+#define S_SCD_WDOG_ENABLE	    0
+#define M_SCD_WDOG_ENABLE	    _SB_MAKEMASK1(S_SCD_WDOG_ENABLE)
 
-#define S_SCD_WDOG_RESET_TYPE       2
-#define M_SCD_WDOG_RESET_TYPE       _SB_MAKEMASK(3, S_SCD_WDOG_RESET_TYPE)
+#define S_SCD_WDOG_RESET_TYPE	    2
+#define M_SCD_WDOG_RESET_TYPE	    _SB_MAKEMASK(3, S_SCD_WDOG_RESET_TYPE)
 #define V_SCD_WDOG_RESET_TYPE(x)    _SB_MAKEVALUE(x, S_SCD_WDOG_RESET_TYPE)
 #define G_SCD_WDOG_RESET_TYPE(x)    _SB_GETVALUE(x, S_SCD_WDOG_RESET_TYPE, M_SCD_WDOG_RESET_TYPE)
 
-#define K_SCD_WDOG_RESET_FULL       0	/* actually, (x & 1) == 0  */
-#define K_SCD_WDOG_RESET_SOFT       1
-#define K_SCD_WDOG_RESET_CPU0       3
-#define K_SCD_WDOG_RESET_CPU1       5
+#define K_SCD_WDOG_RESET_FULL	    0	/* actually, (x & 1) == 0  */
+#define K_SCD_WDOG_RESET_SOFT	    1
+#define K_SCD_WDOG_RESET_CPU0	    3
+#define K_SCD_WDOG_RESET_CPU1	    5
 #define K_SCD_WDOG_RESET_BOTH_CPUS  7
 
 /* This feature is present in 1250 C0 and later, but *not* in 112x A revs.  */
 #if SIBYTE_HDR_FEATURE(1250, PASS3)
-#define S_SCD_WDOG_HAS_RESET        8
-#define M_SCD_WDOG_HAS_RESET        _SB_MAKEMASK1(S_SCD_WDOG_HAS_RESET)
+#define S_SCD_WDOG_HAS_RESET	    8
+#define M_SCD_WDOG_HAS_RESET	    _SB_MAKEMASK1(S_SCD_WDOG_HAS_RESET)
 #endif
 
 
@@ -360,46 +360,46 @@
  * Timer Registers (Table 4-11) (Table 4-12) (Table 4-13)
  */
 
-#define V_SCD_TIMER_FREQ            1000000
+#define V_SCD_TIMER_FREQ	    1000000
 
-#define S_SCD_TIMER_INIT            0
-#define M_SCD_TIMER_INIT            _SB_MAKEMASK(23, S_SCD_TIMER_INIT)
-#define V_SCD_TIMER_INIT(x)         _SB_MAKEVALUE(x, S_SCD_TIMER_INIT)
-#define G_SCD_TIMER_INIT(x)         _SB_GETVALUE(x, S_SCD_TIMER_INIT, M_SCD_TIMER_INIT)
+#define S_SCD_TIMER_INIT	    0
+#define M_SCD_TIMER_INIT	    _SB_MAKEMASK(23, S_SCD_TIMER_INIT)
+#define V_SCD_TIMER_INIT(x)	    _SB_MAKEVALUE(x, S_SCD_TIMER_INIT)
+#define G_SCD_TIMER_INIT(x)	    _SB_GETVALUE(x, S_SCD_TIMER_INIT, M_SCD_TIMER_INIT)
 
 #define V_SCD_TIMER_WIDTH	    23
-#define S_SCD_TIMER_CNT             0
-#define M_SCD_TIMER_CNT             _SB_MAKEMASK(V_SCD_TIMER_WIDTH, S_SCD_TIMER_CNT)
-#define V_SCD_TIMER_CNT(x)         _SB_MAKEVALUE(x, S_SCD_TIMER_CNT)
-#define G_SCD_TIMER_CNT(x)         _SB_GETVALUE(x, S_SCD_TIMER_CNT, M_SCD_TIMER_CNT)
+#define S_SCD_TIMER_CNT		    0
+#define M_SCD_TIMER_CNT		    _SB_MAKEMASK(V_SCD_TIMER_WIDTH, S_SCD_TIMER_CNT)
+#define V_SCD_TIMER_CNT(x)	   _SB_MAKEVALUE(x, S_SCD_TIMER_CNT)
+#define G_SCD_TIMER_CNT(x)	   _SB_GETVALUE(x, S_SCD_TIMER_CNT, M_SCD_TIMER_CNT)
 
-#define M_SCD_TIMER_ENABLE          _SB_MAKEMASK1(0)
-#define M_SCD_TIMER_MODE            _SB_MAKEMASK1(1)
+#define M_SCD_TIMER_ENABLE	    _SB_MAKEMASK1(0)
+#define M_SCD_TIMER_MODE	    _SB_MAKEMASK1(1)
 #define M_SCD_TIMER_MODE_CONTINUOUS M_SCD_TIMER_MODE
 
 /*
  * System Performance Counters
  */
 
-#define S_SPC_CFG_SRC0            0
-#define M_SPC_CFG_SRC0            _SB_MAKEMASK(8, S_SPC_CFG_SRC0)
-#define V_SPC_CFG_SRC0(x)         _SB_MAKEVALUE(x, S_SPC_CFG_SRC0)
-#define G_SPC_CFG_SRC0(x)         _SB_GETVALUE(x, S_SPC_CFG_SRC0, M_SPC_CFG_SRC0)
+#define S_SPC_CFG_SRC0		  0
+#define M_SPC_CFG_SRC0		  _SB_MAKEMASK(8, S_SPC_CFG_SRC0)
+#define V_SPC_CFG_SRC0(x)	  _SB_MAKEVALUE(x, S_SPC_CFG_SRC0)
+#define G_SPC_CFG_SRC0(x)	  _SB_GETVALUE(x, S_SPC_CFG_SRC0, M_SPC_CFG_SRC0)
 
-#define S_SPC_CFG_SRC1            8
-#define M_SPC_CFG_SRC1            _SB_MAKEMASK(8, S_SPC_CFG_SRC1)
-#define V_SPC_CFG_SRC1(x)         _SB_MAKEVALUE(x, S_SPC_CFG_SRC1)
-#define G_SPC_CFG_SRC1(x)         _SB_GETVALUE(x, S_SPC_CFG_SRC1, M_SPC_CFG_SRC1)
+#define S_SPC_CFG_SRC1		  8
+#define M_SPC_CFG_SRC1		  _SB_MAKEMASK(8, S_SPC_CFG_SRC1)
+#define V_SPC_CFG_SRC1(x)	  _SB_MAKEVALUE(x, S_SPC_CFG_SRC1)
+#define G_SPC_CFG_SRC1(x)	  _SB_GETVALUE(x, S_SPC_CFG_SRC1, M_SPC_CFG_SRC1)
 
-#define S_SPC_CFG_SRC2            16
-#define M_SPC_CFG_SRC2            _SB_MAKEMASK(8, S_SPC_CFG_SRC2)
-#define V_SPC_CFG_SRC2(x)         _SB_MAKEVALUE(x, S_SPC_CFG_SRC2)
-#define G_SPC_CFG_SRC2(x)         _SB_GETVALUE(x, S_SPC_CFG_SRC2, M_SPC_CFG_SRC2)
+#define S_SPC_CFG_SRC2		  16
+#define M_SPC_CFG_SRC2		  _SB_MAKEMASK(8, S_SPC_CFG_SRC2)
+#define V_SPC_CFG_SRC2(x)	  _SB_MAKEVALUE(x, S_SPC_CFG_SRC2)
+#define G_SPC_CFG_SRC2(x)	  _SB_GETVALUE(x, S_SPC_CFG_SRC2, M_SPC_CFG_SRC2)
 
-#define S_SPC_CFG_SRC3            24
-#define M_SPC_CFG_SRC3            _SB_MAKEMASK(8, S_SPC_CFG_SRC3)
-#define V_SPC_CFG_SRC3(x)         _SB_MAKEVALUE(x, S_SPC_CFG_SRC3)
-#define G_SPC_CFG_SRC3(x)         _SB_GETVALUE(x, S_SPC_CFG_SRC3, M_SPC_CFG_SRC3)
+#define S_SPC_CFG_SRC3		  24
+#define M_SPC_CFG_SRC3		  _SB_MAKEMASK(8, S_SPC_CFG_SRC3)
+#define V_SPC_CFG_SRC3(x)	  _SB_MAKEVALUE(x, S_SPC_CFG_SRC3)
+#define G_SPC_CFG_SRC3(x)	  _SB_GETVALUE(x, S_SPC_CFG_SRC3, M_SPC_CFG_SRC3)
 
 #if SIBYTE_HDR_FEATURE_1250_112x
 #define M_SPC_CFG_CLEAR		_SB_MAKEMASK1(32)
@@ -411,58 +411,58 @@
  * Bus Watcher
  */
 
-#define S_SCD_BERR_TID            8
-#define M_SCD_BERR_TID            _SB_MAKEMASK(10, S_SCD_BERR_TID)
-#define V_SCD_BERR_TID(x)         _SB_MAKEVALUE(x, S_SCD_BERR_TID)
-#define G_SCD_BERR_TID(x)         _SB_GETVALUE(x, S_SCD_BERR_TID, M_SCD_BERR_TID)
+#define S_SCD_BERR_TID		  8
+#define M_SCD_BERR_TID		  _SB_MAKEMASK(10, S_SCD_BERR_TID)
+#define V_SCD_BERR_TID(x)	  _SB_MAKEVALUE(x, S_SCD_BERR_TID)
+#define G_SCD_BERR_TID(x)	  _SB_GETVALUE(x, S_SCD_BERR_TID, M_SCD_BERR_TID)
 
-#define S_SCD_BERR_RID            18
-#define M_SCD_BERR_RID            _SB_MAKEMASK(4, S_SCD_BERR_RID)
-#define V_SCD_BERR_RID(x)         _SB_MAKEVALUE(x, S_SCD_BERR_RID)
-#define G_SCD_BERR_RID(x)         _SB_GETVALUE(x, S_SCD_BERR_RID, M_SCD_BERR_RID)
+#define S_SCD_BERR_RID		  18
+#define M_SCD_BERR_RID		  _SB_MAKEMASK(4, S_SCD_BERR_RID)
+#define V_SCD_BERR_RID(x)	  _SB_MAKEVALUE(x, S_SCD_BERR_RID)
+#define G_SCD_BERR_RID(x)	  _SB_GETVALUE(x, S_SCD_BERR_RID, M_SCD_BERR_RID)
 
-#define S_SCD_BERR_DCODE          22
-#define M_SCD_BERR_DCODE          _SB_MAKEMASK(3, S_SCD_BERR_DCODE)
-#define V_SCD_BERR_DCODE(x)       _SB_MAKEVALUE(x, S_SCD_BERR_DCODE)
-#define G_SCD_BERR_DCODE(x)       _SB_GETVALUE(x, S_SCD_BERR_DCODE, M_SCD_BERR_DCODE)
+#define S_SCD_BERR_DCODE	  22
+#define M_SCD_BERR_DCODE	  _SB_MAKEMASK(3, S_SCD_BERR_DCODE)
+#define V_SCD_BERR_DCODE(x)	  _SB_MAKEVALUE(x, S_SCD_BERR_DCODE)
+#define G_SCD_BERR_DCODE(x)	  _SB_GETVALUE(x, S_SCD_BERR_DCODE, M_SCD_BERR_DCODE)
 
-#define M_SCD_BERR_MULTERRS       _SB_MAKEMASK1(30)
+#define M_SCD_BERR_MULTERRS	  _SB_MAKEMASK1(30)
 
 
-#define S_SCD_L2ECC_CORR_D        0
-#define M_SCD_L2ECC_CORR_D        _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_D)
-#define V_SCD_L2ECC_CORR_D(x)     _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_D)
-#define G_SCD_L2ECC_CORR_D(x)     _SB_GETVALUE(x, S_SCD_L2ECC_CORR_D, M_SCD_L2ECC_CORR_D)
+#define S_SCD_L2ECC_CORR_D	  0
+#define M_SCD_L2ECC_CORR_D	  _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_D)
+#define V_SCD_L2ECC_CORR_D(x)	  _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_D)
+#define G_SCD_L2ECC_CORR_D(x)	  _SB_GETVALUE(x, S_SCD_L2ECC_CORR_D, M_SCD_L2ECC_CORR_D)
 
-#define S_SCD_L2ECC_BAD_D         8
-#define M_SCD_L2ECC_BAD_D         _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_D)
-#define V_SCD_L2ECC_BAD_D(x)      _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_D)
-#define G_SCD_L2ECC_BAD_D(x)      _SB_GETVALUE(x, S_SCD_L2ECC_BAD_D, M_SCD_L2ECC_BAD_D)
+#define S_SCD_L2ECC_BAD_D	  8
+#define M_SCD_L2ECC_BAD_D	  _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_D)
+#define V_SCD_L2ECC_BAD_D(x)	  _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_D)
+#define G_SCD_L2ECC_BAD_D(x)	  _SB_GETVALUE(x, S_SCD_L2ECC_BAD_D, M_SCD_L2ECC_BAD_D)
 
-#define S_SCD_L2ECC_CORR_T        16
-#define M_SCD_L2ECC_CORR_T        _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_T)
-#define V_SCD_L2ECC_CORR_T(x)     _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_T)
-#define G_SCD_L2ECC_CORR_T(x)     _SB_GETVALUE(x, S_SCD_L2ECC_CORR_T, M_SCD_L2ECC_CORR_T)
+#define S_SCD_L2ECC_CORR_T	  16
+#define M_SCD_L2ECC_CORR_T	  _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_T)
+#define V_SCD_L2ECC_CORR_T(x)	  _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_T)
+#define G_SCD_L2ECC_CORR_T(x)	  _SB_GETVALUE(x, S_SCD_L2ECC_CORR_T, M_SCD_L2ECC_CORR_T)
 
-#define S_SCD_L2ECC_BAD_T         24
-#define M_SCD_L2ECC_BAD_T         _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_T)
-#define V_SCD_L2ECC_BAD_T(x)      _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_T)
-#define G_SCD_L2ECC_BAD_T(x)      _SB_GETVALUE(x, S_SCD_L2ECC_BAD_T, M_SCD_L2ECC_BAD_T)
+#define S_SCD_L2ECC_BAD_T	  24
+#define M_SCD_L2ECC_BAD_T	  _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_T)
+#define V_SCD_L2ECC_BAD_T(x)	  _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_T)
+#define G_SCD_L2ECC_BAD_T(x)	  _SB_GETVALUE(x, S_SCD_L2ECC_BAD_T, M_SCD_L2ECC_BAD_T)
 
-#define S_SCD_MEM_ECC_CORR        0
-#define M_SCD_MEM_ECC_CORR        _SB_MAKEMASK(8, S_SCD_MEM_ECC_CORR)
-#define V_SCD_MEM_ECC_CORR(x)     _SB_MAKEVALUE(x, S_SCD_MEM_ECC_CORR)
-#define G_SCD_MEM_ECC_CORR(x)     _SB_GETVALUE(x, S_SCD_MEM_ECC_CORR, M_SCD_MEM_ECC_CORR)
+#define S_SCD_MEM_ECC_CORR	  0
+#define M_SCD_MEM_ECC_CORR	  _SB_MAKEMASK(8, S_SCD_MEM_ECC_CORR)
+#define V_SCD_MEM_ECC_CORR(x)	  _SB_MAKEVALUE(x, S_SCD_MEM_ECC_CORR)
+#define G_SCD_MEM_ECC_CORR(x)	  _SB_GETVALUE(x, S_SCD_MEM_ECC_CORR, M_SCD_MEM_ECC_CORR)
 
-#define S_SCD_MEM_ECC_BAD         8
-#define M_SCD_MEM_ECC_BAD         _SB_MAKEMASK(8, S_SCD_MEM_ECC_BAD)
-#define V_SCD_MEM_ECC_BAD(x)      _SB_MAKEVALUE(x, S_SCD_MEM_ECC_BAD)
-#define G_SCD_MEM_ECC_BAD(x)      _SB_GETVALUE(x, S_SCD_MEM_ECC_BAD, M_SCD_MEM_ECC_BAD)
+#define S_SCD_MEM_ECC_BAD	  8
+#define M_SCD_MEM_ECC_BAD	  _SB_MAKEMASK(8, S_SCD_MEM_ECC_BAD)
+#define V_SCD_MEM_ECC_BAD(x)	  _SB_MAKEVALUE(x, S_SCD_MEM_ECC_BAD)
+#define G_SCD_MEM_ECC_BAD(x)	  _SB_GETVALUE(x, S_SCD_MEM_ECC_BAD, M_SCD_MEM_ECC_BAD)
 
-#define S_SCD_MEM_BUSERR          16
-#define M_SCD_MEM_BUSERR          _SB_MAKEMASK(8, S_SCD_MEM_BUSERR)
-#define V_SCD_MEM_BUSERR(x)       _SB_MAKEVALUE(x, S_SCD_MEM_BUSERR)
-#define G_SCD_MEM_BUSERR(x)       _SB_GETVALUE(x, S_SCD_MEM_BUSERR, M_SCD_MEM_BUSERR)
+#define S_SCD_MEM_BUSERR	  16
+#define M_SCD_MEM_BUSERR	  _SB_MAKEMASK(8, S_SCD_MEM_BUSERR)
+#define V_SCD_MEM_BUSERR(x)	  _SB_MAKEVALUE(x, S_SCD_MEM_BUSERR)
+#define G_SCD_MEM_BUSERR(x)	  _SB_GETVALUE(x, S_SCD_MEM_BUSERR, M_SCD_MEM_BUSERR)
 
 
 /*
@@ -473,28 +473,28 @@
 #define M_ATRAP_INDEX		  _SB_MAKEMASK(4, 0)
 #define M_ATRAP_ADDRESS		  _SB_MAKEMASK(40, 0)
 
-#define S_ATRAP_CFG_CNT            0
-#define M_ATRAP_CFG_CNT            _SB_MAKEMASK(3, S_ATRAP_CFG_CNT)
-#define V_ATRAP_CFG_CNT(x)         _SB_MAKEVALUE(x, S_ATRAP_CFG_CNT)
-#define G_ATRAP_CFG_CNT(x)         _SB_GETVALUE(x, S_ATRAP_CFG_CNT, M_ATRAP_CFG_CNT)
+#define S_ATRAP_CFG_CNT		   0
+#define M_ATRAP_CFG_CNT		   _SB_MAKEMASK(3, S_ATRAP_CFG_CNT)
+#define V_ATRAP_CFG_CNT(x)	   _SB_MAKEVALUE(x, S_ATRAP_CFG_CNT)
+#define G_ATRAP_CFG_CNT(x)	   _SB_GETVALUE(x, S_ATRAP_CFG_CNT, M_ATRAP_CFG_CNT)
 
 #define M_ATRAP_CFG_WRITE	   _SB_MAKEMASK1(3)
-#define M_ATRAP_CFG_ALL	  	   _SB_MAKEMASK1(4)
-#define M_ATRAP_CFG_INV	   	   _SB_MAKEMASK1(5)
+#define M_ATRAP_CFG_ALL		   _SB_MAKEMASK1(4)
+#define M_ATRAP_CFG_INV		   _SB_MAKEMASK1(5)
 #define M_ATRAP_CFG_USESRC	   _SB_MAKEMASK1(6)
 #define M_ATRAP_CFG_SRCINV	   _SB_MAKEMASK1(7)
 
-#define S_ATRAP_CFG_AGENTID     8
-#define M_ATRAP_CFG_AGENTID     _SB_MAKEMASK(4, S_ATRAP_CFG_AGENTID)
-#define V_ATRAP_CFG_AGENTID(x)  _SB_MAKEVALUE(x, S_ATRAP_CFG_AGENTID)
-#define G_ATRAP_CFG_AGENTID(x)  _SB_GETVALUE(x, S_ATRAP_CFG_AGENTID, M_ATRAP_CFG_AGENTID)
+#define S_ATRAP_CFG_AGENTID	8
+#define M_ATRAP_CFG_AGENTID	_SB_MAKEMASK(4, S_ATRAP_CFG_AGENTID)
+#define V_ATRAP_CFG_AGENTID(x)	_SB_MAKEVALUE(x, S_ATRAP_CFG_AGENTID)
+#define G_ATRAP_CFG_AGENTID(x)	_SB_GETVALUE(x, S_ATRAP_CFG_AGENTID, M_ATRAP_CFG_AGENTID)
 
 #define K_BUS_AGENT_CPU0	0
 #define K_BUS_AGENT_CPU1	1
 #define K_BUS_AGENT_IOB0	2
 #define K_BUS_AGENT_IOB1	3
-#define K_BUS_AGENT_SCD	4
-#define K_BUS_AGENT_L2C	6
+#define K_BUS_AGENT_SCD 4
+#define K_BUS_AGENT_L2C 6
 #define K_BUS_AGENT_MC	7
 
 #define S_ATRAP_CFG_CATTR     12
@@ -503,13 +503,13 @@
 #define G_ATRAP_CFG_CATTR(x)  _SB_GETVALUE(x, S_ATRAP_CFG_CATTR, M_ATRAP_CFG_CATTR)
 
 #define K_ATRAP_CFG_CATTR_IGNORE	0
-#define K_ATRAP_CFG_CATTR_UNC    	1
+#define K_ATRAP_CFG_CATTR_UNC		1
 #define K_ATRAP_CFG_CATTR_CACHEABLE	2
-#define K_ATRAP_CFG_CATTR_NONCOH  	3
+#define K_ATRAP_CFG_CATTR_NONCOH	3
 #define K_ATRAP_CFG_CATTR_COHERENT	4
 #define K_ATRAP_CFG_CATTR_NOTUNC	5
 #define K_ATRAP_CFG_CATTR_NOTNONCOH	6
-#define K_ATRAP_CFG_CATTR_NOTCOHERENT   7
+#define K_ATRAP_CFG_CATTR_NOTCOHERENT	7
 
 #endif	/* 1250/112x */
 
@@ -517,16 +517,16 @@
  * Trace Buffer Config register
  */
 
-#define M_SCD_TRACE_CFG_RESET           _SB_MAKEMASK1(0)
-#define M_SCD_TRACE_CFG_START_READ      _SB_MAKEMASK1(1)
-#define M_SCD_TRACE_CFG_START           _SB_MAKEMASK1(2)
-#define M_SCD_TRACE_CFG_STOP            _SB_MAKEMASK1(3)
-#define M_SCD_TRACE_CFG_FREEZE          _SB_MAKEMASK1(4)
-#define M_SCD_TRACE_CFG_FREEZE_FULL     _SB_MAKEMASK1(5)
-#define M_SCD_TRACE_CFG_DEBUG_FULL      _SB_MAKEMASK1(6)
-#define M_SCD_TRACE_CFG_FULL            _SB_MAKEMASK1(7)
+#define M_SCD_TRACE_CFG_RESET		_SB_MAKEMASK1(0)
+#define M_SCD_TRACE_CFG_START_READ	_SB_MAKEMASK1(1)
+#define M_SCD_TRACE_CFG_START		_SB_MAKEMASK1(2)
+#define M_SCD_TRACE_CFG_STOP		_SB_MAKEMASK1(3)
+#define M_SCD_TRACE_CFG_FREEZE		_SB_MAKEMASK1(4)
+#define M_SCD_TRACE_CFG_FREEZE_FULL	_SB_MAKEMASK1(5)
+#define M_SCD_TRACE_CFG_DEBUG_FULL	_SB_MAKEMASK1(6)
+#define M_SCD_TRACE_CFG_FULL		_SB_MAKEMASK1(7)
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define M_SCD_TRACE_CFG_FORCECNT        _SB_MAKEMASK1(8)
+#define M_SCD_TRACE_CFG_FORCECNT	_SB_MAKEMASK1(8)
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 /*
@@ -534,121 +534,121 @@
  * a slightly different place in the register.
  */
 #if SIBYTE_HDR_FEATURE_1250_112x
-#define S_SCD_TRACE_CFG_CUR_ADDR        10
+#define S_SCD_TRACE_CFG_CUR_ADDR	10
 #else
 #if SIBYTE_HDR_FEATURE_CHIP(1480)
-#define S_SCD_TRACE_CFG_CUR_ADDR        24
+#define S_SCD_TRACE_CFG_CUR_ADDR	24
 #endif	/* 1480 */
-#endif  /* 1250/112x */
+#endif	/* 1250/112x */
 
-#define M_SCD_TRACE_CFG_CUR_ADDR        _SB_MAKEMASK(8, S_SCD_TRACE_CFG_CUR_ADDR)
-#define V_SCD_TRACE_CFG_CUR_ADDR(x)     _SB_MAKEVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR)
-#define G_SCD_TRACE_CFG_CUR_ADDR(x)     _SB_GETVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR, M_SCD_TRACE_CFG_CUR_ADDR)
+#define M_SCD_TRACE_CFG_CUR_ADDR	_SB_MAKEMASK(8, S_SCD_TRACE_CFG_CUR_ADDR)
+#define V_SCD_TRACE_CFG_CUR_ADDR(x)	_SB_MAKEVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR)
+#define G_SCD_TRACE_CFG_CUR_ADDR(x)	_SB_GETVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR, M_SCD_TRACE_CFG_CUR_ADDR)
 
 /*
  * Trace Event registers
  */
 
-#define S_SCD_TREVT_ADDR_MATCH          0
-#define M_SCD_TREVT_ADDR_MATCH          _SB_MAKEMASK(4, S_SCD_TREVT_ADDR_MATCH)
-#define V_SCD_TREVT_ADDR_MATCH(x)       _SB_MAKEVALUE(x, S_SCD_TREVT_ADDR_MATCH)
-#define G_SCD_TREVT_ADDR_MATCH(x)       _SB_GETVALUE(x, S_SCD_TREVT_ADDR_MATCH, M_SCD_TREVT_ADDR_MATCH)
+#define S_SCD_TREVT_ADDR_MATCH		0
+#define M_SCD_TREVT_ADDR_MATCH		_SB_MAKEMASK(4, S_SCD_TREVT_ADDR_MATCH)
+#define V_SCD_TREVT_ADDR_MATCH(x)	_SB_MAKEVALUE(x, S_SCD_TREVT_ADDR_MATCH)
+#define G_SCD_TREVT_ADDR_MATCH(x)	_SB_GETVALUE(x, S_SCD_TREVT_ADDR_MATCH, M_SCD_TREVT_ADDR_MATCH)
 
-#define M_SCD_TREVT_REQID_MATCH         _SB_MAKEMASK1(4)
-#define M_SCD_TREVT_DATAID_MATCH        _SB_MAKEMASK1(5)
-#define M_SCD_TREVT_RESPID_MATCH        _SB_MAKEMASK1(6)
-#define M_SCD_TREVT_INTERRUPT           _SB_MAKEMASK1(7)
-#define M_SCD_TREVT_DEBUG_PIN           _SB_MAKEMASK1(9)
-#define M_SCD_TREVT_WRITE               _SB_MAKEMASK1(10)
-#define M_SCD_TREVT_READ                _SB_MAKEMASK1(11)
+#define M_SCD_TREVT_REQID_MATCH		_SB_MAKEMASK1(4)
+#define M_SCD_TREVT_DATAID_MATCH	_SB_MAKEMASK1(5)
+#define M_SCD_TREVT_RESPID_MATCH	_SB_MAKEMASK1(6)
+#define M_SCD_TREVT_INTERRUPT		_SB_MAKEMASK1(7)
+#define M_SCD_TREVT_DEBUG_PIN		_SB_MAKEMASK1(9)
+#define M_SCD_TREVT_WRITE		_SB_MAKEMASK1(10)
+#define M_SCD_TREVT_READ		_SB_MAKEMASK1(11)
 
-#define S_SCD_TREVT_REQID               12
-#define M_SCD_TREVT_REQID               _SB_MAKEMASK(4, S_SCD_TREVT_REQID)
-#define V_SCD_TREVT_REQID(x)            _SB_MAKEVALUE(x, S_SCD_TREVT_REQID)
-#define G_SCD_TREVT_REQID(x)            _SB_GETVALUE(x, S_SCD_TREVT_REQID, M_SCD_TREVT_REQID)
+#define S_SCD_TREVT_REQID		12
+#define M_SCD_TREVT_REQID		_SB_MAKEMASK(4, S_SCD_TREVT_REQID)
+#define V_SCD_TREVT_REQID(x)		_SB_MAKEVALUE(x, S_SCD_TREVT_REQID)
+#define G_SCD_TREVT_REQID(x)		_SB_GETVALUE(x, S_SCD_TREVT_REQID, M_SCD_TREVT_REQID)
 
-#define S_SCD_TREVT_RESPID              16
-#define M_SCD_TREVT_RESPID              _SB_MAKEMASK(4, S_SCD_TREVT_RESPID)
-#define V_SCD_TREVT_RESPID(x)           _SB_MAKEVALUE(x, S_SCD_TREVT_RESPID)
-#define G_SCD_TREVT_RESPID(x)           _SB_GETVALUE(x, S_SCD_TREVT_RESPID, M_SCD_TREVT_RESPID)
+#define S_SCD_TREVT_RESPID		16
+#define M_SCD_TREVT_RESPID		_SB_MAKEMASK(4, S_SCD_TREVT_RESPID)
+#define V_SCD_TREVT_RESPID(x)		_SB_MAKEVALUE(x, S_SCD_TREVT_RESPID)
+#define G_SCD_TREVT_RESPID(x)		_SB_GETVALUE(x, S_SCD_TREVT_RESPID, M_SCD_TREVT_RESPID)
 
-#define S_SCD_TREVT_DATAID              20
-#define M_SCD_TREVT_DATAID              _SB_MAKEMASK(4, S_SCD_TREVT_DATAID)
-#define V_SCD_TREVT_DATAID(x)           _SB_MAKEVALUE(x, S_SCD_TREVT_DATAID)
-#define G_SCD_TREVT_DATAID(x)           _SB_GETVALUE(x, S_SCD_TREVT_DATAID, M_SCD_TREVT_DATID)
+#define S_SCD_TREVT_DATAID		20
+#define M_SCD_TREVT_DATAID		_SB_MAKEMASK(4, S_SCD_TREVT_DATAID)
+#define V_SCD_TREVT_DATAID(x)		_SB_MAKEVALUE(x, S_SCD_TREVT_DATAID)
+#define G_SCD_TREVT_DATAID(x)		_SB_GETVALUE(x, S_SCD_TREVT_DATAID, M_SCD_TREVT_DATID)
 
-#define S_SCD_TREVT_COUNT               24
-#define M_SCD_TREVT_COUNT               _SB_MAKEMASK(8, S_SCD_TREVT_COUNT)
-#define V_SCD_TREVT_COUNT(x)            _SB_MAKEVALUE(x, S_SCD_TREVT_COUNT)
-#define G_SCD_TREVT_COUNT(x)            _SB_GETVALUE(x, S_SCD_TREVT_COUNT, M_SCD_TREVT_COUNT)
+#define S_SCD_TREVT_COUNT		24
+#define M_SCD_TREVT_COUNT		_SB_MAKEMASK(8, S_SCD_TREVT_COUNT)
+#define V_SCD_TREVT_COUNT(x)		_SB_MAKEVALUE(x, S_SCD_TREVT_COUNT)
+#define G_SCD_TREVT_COUNT(x)		_SB_GETVALUE(x, S_SCD_TREVT_COUNT, M_SCD_TREVT_COUNT)
 
 /*
  * Trace Sequence registers
  */
 
-#define S_SCD_TRSEQ_EVENT4              0
-#define M_SCD_TRSEQ_EVENT4              _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT4)
-#define V_SCD_TRSEQ_EVENT4(x)           _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT4)
-#define G_SCD_TRSEQ_EVENT4(x)           _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT4, M_SCD_TRSEQ_EVENT4)
+#define S_SCD_TRSEQ_EVENT4		0
+#define M_SCD_TRSEQ_EVENT4		_SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT4)
+#define V_SCD_TRSEQ_EVENT4(x)		_SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT4)
+#define G_SCD_TRSEQ_EVENT4(x)		_SB_GETVALUE(x, S_SCD_TRSEQ_EVENT4, M_SCD_TRSEQ_EVENT4)
 
-#define S_SCD_TRSEQ_EVENT3              4
-#define M_SCD_TRSEQ_EVENT3              _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT3)
-#define V_SCD_TRSEQ_EVENT3(x)           _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT3)
-#define G_SCD_TRSEQ_EVENT3(x)           _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT3, M_SCD_TRSEQ_EVENT3)
+#define S_SCD_TRSEQ_EVENT3		4
+#define M_SCD_TRSEQ_EVENT3		_SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT3)
+#define V_SCD_TRSEQ_EVENT3(x)		_SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT3)
+#define G_SCD_TRSEQ_EVENT3(x)		_SB_GETVALUE(x, S_SCD_TRSEQ_EVENT3, M_SCD_TRSEQ_EVENT3)
 
-#define S_SCD_TRSEQ_EVENT2              8
-#define M_SCD_TRSEQ_EVENT2              _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT2)
-#define V_SCD_TRSEQ_EVENT2(x)           _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT2)
-#define G_SCD_TRSEQ_EVENT2(x)           _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT2, M_SCD_TRSEQ_EVENT2)
+#define S_SCD_TRSEQ_EVENT2		8
+#define M_SCD_TRSEQ_EVENT2		_SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT2)
+#define V_SCD_TRSEQ_EVENT2(x)		_SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT2)
+#define G_SCD_TRSEQ_EVENT2(x)		_SB_GETVALUE(x, S_SCD_TRSEQ_EVENT2, M_SCD_TRSEQ_EVENT2)
 
-#define S_SCD_TRSEQ_EVENT1              12
-#define M_SCD_TRSEQ_EVENT1              _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT1)
-#define V_SCD_TRSEQ_EVENT1(x)           _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT1)
-#define G_SCD_TRSEQ_EVENT1(x)           _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT1, M_SCD_TRSEQ_EVENT1)
+#define S_SCD_TRSEQ_EVENT1		12
+#define M_SCD_TRSEQ_EVENT1		_SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT1)
+#define V_SCD_TRSEQ_EVENT1(x)		_SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT1)
+#define G_SCD_TRSEQ_EVENT1(x)		_SB_GETVALUE(x, S_SCD_TRSEQ_EVENT1, M_SCD_TRSEQ_EVENT1)
 
-#define K_SCD_TRSEQ_E0                  0
-#define K_SCD_TRSEQ_E1                  1
-#define K_SCD_TRSEQ_E2                  2
-#define K_SCD_TRSEQ_E3                  3
-#define K_SCD_TRSEQ_E0_E1               4
-#define K_SCD_TRSEQ_E1_E2               5
-#define K_SCD_TRSEQ_E2_E3               6
-#define K_SCD_TRSEQ_E0_E1_E2            7
-#define K_SCD_TRSEQ_E0_E1_E2_E3         8
-#define K_SCD_TRSEQ_E0E1                9
-#define K_SCD_TRSEQ_E0E1E2              10
-#define K_SCD_TRSEQ_E0E1E2E3            11
-#define K_SCD_TRSEQ_E0E1_E2             12
-#define K_SCD_TRSEQ_E0E1_E2E3           13
-#define K_SCD_TRSEQ_E0E1_E2_E3          14
-#define K_SCD_TRSEQ_IGNORED             15
+#define K_SCD_TRSEQ_E0			0
+#define K_SCD_TRSEQ_E1			1
+#define K_SCD_TRSEQ_E2			2
+#define K_SCD_TRSEQ_E3			3
+#define K_SCD_TRSEQ_E0_E1		4
+#define K_SCD_TRSEQ_E1_E2		5
+#define K_SCD_TRSEQ_E2_E3		6
+#define K_SCD_TRSEQ_E0_E1_E2		7
+#define K_SCD_TRSEQ_E0_E1_E2_E3		8
+#define K_SCD_TRSEQ_E0E1		9
+#define K_SCD_TRSEQ_E0E1E2		10
+#define K_SCD_TRSEQ_E0E1E2E3		11
+#define K_SCD_TRSEQ_E0E1_E2		12
+#define K_SCD_TRSEQ_E0E1_E2E3		13
+#define K_SCD_TRSEQ_E0E1_E2_E3		14
+#define K_SCD_TRSEQ_IGNORED		15
 
-#define K_SCD_TRSEQ_TRIGGER_ALL         (V_SCD_TRSEQ_EVENT1(K_SCD_TRSEQ_IGNORED) | \
-                                         V_SCD_TRSEQ_EVENT2(K_SCD_TRSEQ_IGNORED) | \
-                                         V_SCD_TRSEQ_EVENT3(K_SCD_TRSEQ_IGNORED) | \
-                                         V_SCD_TRSEQ_EVENT4(K_SCD_TRSEQ_IGNORED))
+#define K_SCD_TRSEQ_TRIGGER_ALL		(V_SCD_TRSEQ_EVENT1(K_SCD_TRSEQ_IGNORED) | \
+					 V_SCD_TRSEQ_EVENT2(K_SCD_TRSEQ_IGNORED) | \
+					 V_SCD_TRSEQ_EVENT3(K_SCD_TRSEQ_IGNORED) | \
+					 V_SCD_TRSEQ_EVENT4(K_SCD_TRSEQ_IGNORED))
 
-#define S_SCD_TRSEQ_FUNCTION            16
-#define M_SCD_TRSEQ_FUNCTION            _SB_MAKEMASK(4, S_SCD_TRSEQ_FUNCTION)
-#define V_SCD_TRSEQ_FUNCTION(x)         _SB_MAKEVALUE(x, S_SCD_TRSEQ_FUNCTION)
-#define G_SCD_TRSEQ_FUNCTION(x)         _SB_GETVALUE(x, S_SCD_TRSEQ_FUNCTION, M_SCD_TRSEQ_FUNCTION)
+#define S_SCD_TRSEQ_FUNCTION		16
+#define M_SCD_TRSEQ_FUNCTION		_SB_MAKEMASK(4, S_SCD_TRSEQ_FUNCTION)
+#define V_SCD_TRSEQ_FUNCTION(x)		_SB_MAKEVALUE(x, S_SCD_TRSEQ_FUNCTION)
+#define G_SCD_TRSEQ_FUNCTION(x)		_SB_GETVALUE(x, S_SCD_TRSEQ_FUNCTION, M_SCD_TRSEQ_FUNCTION)
 
-#define K_SCD_TRSEQ_FUNC_NOP            0
-#define K_SCD_TRSEQ_FUNC_START          1
-#define K_SCD_TRSEQ_FUNC_STOP           2
-#define K_SCD_TRSEQ_FUNC_FREEZE         3
+#define K_SCD_TRSEQ_FUNC_NOP		0
+#define K_SCD_TRSEQ_FUNC_START		1
+#define K_SCD_TRSEQ_FUNC_STOP		2
+#define K_SCD_TRSEQ_FUNC_FREEZE		3
 
-#define V_SCD_TRSEQ_FUNC_NOP            V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_NOP)
-#define V_SCD_TRSEQ_FUNC_START          V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_START)
-#define V_SCD_TRSEQ_FUNC_STOP           V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_STOP)
-#define V_SCD_TRSEQ_FUNC_FREEZE         V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_FREEZE)
+#define V_SCD_TRSEQ_FUNC_NOP		V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_NOP)
+#define V_SCD_TRSEQ_FUNC_START		V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_START)
+#define V_SCD_TRSEQ_FUNC_STOP		V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_STOP)
+#define V_SCD_TRSEQ_FUNC_FREEZE		V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_FREEZE)
 
-#define M_SCD_TRSEQ_ASAMPLE             _SB_MAKEMASK1(18)
-#define M_SCD_TRSEQ_DSAMPLE             _SB_MAKEMASK1(19)
-#define M_SCD_TRSEQ_DEBUGPIN            _SB_MAKEMASK1(20)
-#define M_SCD_TRSEQ_DEBUGCPU            _SB_MAKEMASK1(21)
-#define M_SCD_TRSEQ_CLEARUSE            _SB_MAKEMASK1(22)
-#define M_SCD_TRSEQ_ALLD_A              _SB_MAKEMASK1(23)
-#define M_SCD_TRSEQ_ALL_A               _SB_MAKEMASK1(24)
+#define M_SCD_TRSEQ_ASAMPLE		_SB_MAKEMASK1(18)
+#define M_SCD_TRSEQ_DSAMPLE		_SB_MAKEMASK1(19)
+#define M_SCD_TRSEQ_DEBUGPIN		_SB_MAKEMASK1(20)
+#define M_SCD_TRSEQ_DEBUGCPU		_SB_MAKEMASK1(21)
+#define M_SCD_TRSEQ_CLEARUSE		_SB_MAKEMASK1(22)
+#define M_SCD_TRSEQ_ALLD_A		_SB_MAKEMASK1(23)
+#define M_SCD_TRSEQ_ALL_A		_SB_MAKEMASK1(24)
 
 #endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_smbus.h b/arch/mips/include/asm/sibyte/sb1250_smbus.h
index 128d6b7..3cb73e8 100644
--- a/arch/mips/include/asm/sibyte/sb1250_smbus.h
+++ b/arch/mips/include/asm/sibyte/sb1250_smbus.h
@@ -1,7 +1,7 @@
 /*  *********************************************************************
     *  SB1250 Board Support Package
     *
-    *  SMBUS Constants                          File: sb1250_smbus.h
+    *  SMBUS Constants				File: sb1250_smbus.h
     *
     *  This module contains constants and macros useful for
     *  manipulating the SB1250's SMbus devices.
@@ -40,83 +40,83 @@
  * SMBus Clock Frequency Register (Table 14-2)
  */
 
-#define S_SMB_FREQ_DIV              0
-#define M_SMB_FREQ_DIV              _SB_MAKEMASK(13, S_SMB_FREQ_DIV)
-#define V_SMB_FREQ_DIV(x)           _SB_MAKEVALUE(x, S_SMB_FREQ_DIV)
+#define S_SMB_FREQ_DIV		    0
+#define M_SMB_FREQ_DIV		    _SB_MAKEMASK(13, S_SMB_FREQ_DIV)
+#define V_SMB_FREQ_DIV(x)	    _SB_MAKEVALUE(x, S_SMB_FREQ_DIV)
 
 #define K_SMB_FREQ_400KHZ	    0x1F
 #define K_SMB_FREQ_100KHZ	    0x7D
 #define K_SMB_FREQ_10KHZ	    1250
 
-#define S_SMB_CMD                   0
-#define M_SMB_CMD                   _SB_MAKEMASK(8, S_SMB_CMD)
-#define V_SMB_CMD(x)                _SB_MAKEVALUE(x, S_SMB_CMD)
+#define S_SMB_CMD		    0
+#define M_SMB_CMD		    _SB_MAKEMASK(8, S_SMB_CMD)
+#define V_SMB_CMD(x)		    _SB_MAKEVALUE(x, S_SMB_CMD)
 
 /*
  * SMBus control register (Table 14-4)
  */
 
-#define M_SMB_ERR_INTR              _SB_MAKEMASK1(0)
-#define M_SMB_FINISH_INTR           _SB_MAKEMASK1(1)
+#define M_SMB_ERR_INTR		    _SB_MAKEMASK1(0)
+#define M_SMB_FINISH_INTR	    _SB_MAKEMASK1(1)
 
-#define S_SMB_DATA_OUT              4
-#define M_SMB_DATA_OUT              _SB_MAKEMASK1(S_SMB_DATA_OUT)
-#define V_SMB_DATA_OUT(x)           _SB_MAKEVALUE(x, S_SMB_DATA_OUT)
+#define S_SMB_DATA_OUT		    4
+#define M_SMB_DATA_OUT		    _SB_MAKEMASK1(S_SMB_DATA_OUT)
+#define V_SMB_DATA_OUT(x)	    _SB_MAKEVALUE(x, S_SMB_DATA_OUT)
 
-#define M_SMB_DATA_DIR              _SB_MAKEMASK1(5)
-#define M_SMB_DATA_DIR_OUTPUT       M_SMB_DATA_DIR
-#define M_SMB_CLK_OUT               _SB_MAKEMASK1(6)
-#define M_SMB_DIRECT_ENABLE         _SB_MAKEMASK1(7)
+#define M_SMB_DATA_DIR		    _SB_MAKEMASK1(5)
+#define M_SMB_DATA_DIR_OUTPUT	    M_SMB_DATA_DIR
+#define M_SMB_CLK_OUT		    _SB_MAKEMASK1(6)
+#define M_SMB_DIRECT_ENABLE	    _SB_MAKEMASK1(7)
 
 /*
  * SMBus status registers (Table 14-5)
  */
 
-#define M_SMB_BUSY                  _SB_MAKEMASK1(0)
-#define M_SMB_ERROR                 _SB_MAKEMASK1(1)
-#define M_SMB_ERROR_TYPE            _SB_MAKEMASK1(2)
+#define M_SMB_BUSY		    _SB_MAKEMASK1(0)
+#define M_SMB_ERROR		    _SB_MAKEMASK1(1)
+#define M_SMB_ERROR_TYPE	    _SB_MAKEMASK1(2)
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
-#define S_SMB_SCL_IN                5
-#define M_SMB_SCL_IN                _SB_MAKEMASK1(S_SMB_SCL_IN)
-#define V_SMB_SCL_IN(x)             _SB_MAKEVALUE(x, S_SMB_SCL_IN)
-#define G_SMB_SCL_IN(x)             _SB_GETVALUE(x, S_SMB_SCL_IN, M_SMB_SCL_IN)
+#define S_SMB_SCL_IN		    5
+#define M_SMB_SCL_IN		    _SB_MAKEMASK1(S_SMB_SCL_IN)
+#define V_SMB_SCL_IN(x)		    _SB_MAKEVALUE(x, S_SMB_SCL_IN)
+#define G_SMB_SCL_IN(x)		    _SB_GETVALUE(x, S_SMB_SCL_IN, M_SMB_SCL_IN)
 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 
-#define S_SMB_REF                   6
-#define M_SMB_REF                   _SB_MAKEMASK1(S_SMB_REF)
-#define V_SMB_REF(x)                _SB_MAKEVALUE(x, S_SMB_REF)
-#define G_SMB_REF(x)                _SB_GETVALUE(x, S_SMB_REF, M_SMB_REF)
+#define S_SMB_REF		    6
+#define M_SMB_REF		    _SB_MAKEMASK1(S_SMB_REF)
+#define V_SMB_REF(x)		    _SB_MAKEVALUE(x, S_SMB_REF)
+#define G_SMB_REF(x)		    _SB_GETVALUE(x, S_SMB_REF, M_SMB_REF)
 
-#define S_SMB_DATA_IN               7
-#define M_SMB_DATA_IN               _SB_MAKEMASK1(S_SMB_DATA_IN)
-#define V_SMB_DATA_IN(x)            _SB_MAKEVALUE(x, S_SMB_DATA_IN)
-#define G_SMB_DATA_IN(x)            _SB_GETVALUE(x, S_SMB_DATA_IN, M_SMB_DATA_IN)
+#define S_SMB_DATA_IN		    7
+#define M_SMB_DATA_IN		    _SB_MAKEMASK1(S_SMB_DATA_IN)
+#define V_SMB_DATA_IN(x)	    _SB_MAKEVALUE(x, S_SMB_DATA_IN)
+#define G_SMB_DATA_IN(x)	    _SB_GETVALUE(x, S_SMB_DATA_IN, M_SMB_DATA_IN)
 
 /*
  * SMBus Start/Command registers (Table 14-9)
  */
 
-#define S_SMB_ADDR                  0
-#define M_SMB_ADDR                  _SB_MAKEMASK(7, S_SMB_ADDR)
-#define V_SMB_ADDR(x)               _SB_MAKEVALUE(x, S_SMB_ADDR)
-#define G_SMB_ADDR(x)               _SB_GETVALUE(x, S_SMB_ADDR, M_SMB_ADDR)
+#define S_SMB_ADDR		    0
+#define M_SMB_ADDR		    _SB_MAKEMASK(7, S_SMB_ADDR)
+#define V_SMB_ADDR(x)		    _SB_MAKEVALUE(x, S_SMB_ADDR)
+#define G_SMB_ADDR(x)		    _SB_GETVALUE(x, S_SMB_ADDR, M_SMB_ADDR)
 
-#define M_SMB_QDATA                 _SB_MAKEMASK1(7)
+#define M_SMB_QDATA		    _SB_MAKEMASK1(7)
 
-#define S_SMB_TT                    8
-#define M_SMB_TT                    _SB_MAKEMASK(3, S_SMB_TT)
-#define V_SMB_TT(x)                 _SB_MAKEVALUE(x, S_SMB_TT)
-#define G_SMB_TT(x)                 _SB_GETVALUE(x, S_SMB_TT, M_SMB_TT)
+#define S_SMB_TT		    8
+#define M_SMB_TT		    _SB_MAKEMASK(3, S_SMB_TT)
+#define V_SMB_TT(x)		    _SB_MAKEVALUE(x, S_SMB_TT)
+#define G_SMB_TT(x)		    _SB_GETVALUE(x, S_SMB_TT, M_SMB_TT)
 
-#define K_SMB_TT_WR1BYTE            0
-#define K_SMB_TT_WR2BYTE            1
-#define K_SMB_TT_WR3BYTE            2
-#define K_SMB_TT_CMD_RD1BYTE        3
-#define K_SMB_TT_CMD_RD2BYTE        4
-#define K_SMB_TT_RD1BYTE            5
-#define K_SMB_TT_QUICKCMD           6
-#define K_SMB_TT_EEPROMREAD         7
+#define K_SMB_TT_WR1BYTE	    0
+#define K_SMB_TT_WR2BYTE	    1
+#define K_SMB_TT_WR3BYTE	    2
+#define K_SMB_TT_CMD_RD1BYTE	    3
+#define K_SMB_TT_CMD_RD2BYTE	    4
+#define K_SMB_TT_RD1BYTE	    5
+#define K_SMB_TT_QUICKCMD	    6
+#define K_SMB_TT_EEPROMREAD	    7
 
 #define V_SMB_TT_WR1BYTE	    V_SMB_TT(K_SMB_TT_WR1BYTE)
 #define V_SMB_TT_WR2BYTE	    V_SMB_TT(K_SMB_TT_WR2BYTE)
@@ -127,51 +127,51 @@
 #define V_SMB_TT_QUICKCMD	    V_SMB_TT(K_SMB_TT_QUICKCMD)
 #define V_SMB_TT_EEPROMREAD	    V_SMB_TT(K_SMB_TT_EEPROMREAD)
 
-#define M_SMB_PEC                   _SB_MAKEMASK1(15)
+#define M_SMB_PEC		    _SB_MAKEMASK1(15)
 
 /*
  * SMBus Data Register (Table 14-6) and SMBus Extra Register (Table 14-7)
  */
 
-#define S_SMB_LB                    0
-#define M_SMB_LB                    _SB_MAKEMASK(8, S_SMB_LB)
-#define V_SMB_LB(x)                 _SB_MAKEVALUE(x, S_SMB_LB)
+#define S_SMB_LB		    0
+#define M_SMB_LB		    _SB_MAKEMASK(8, S_SMB_LB)
+#define V_SMB_LB(x)		    _SB_MAKEVALUE(x, S_SMB_LB)
 
-#define S_SMB_MB                    8
-#define M_SMB_MB                    _SB_MAKEMASK(8, S_SMB_MB)
-#define V_SMB_MB(x)                 _SB_MAKEVALUE(x, S_SMB_MB)
+#define S_SMB_MB		    8
+#define M_SMB_MB		    _SB_MAKEMASK(8, S_SMB_MB)
+#define V_SMB_MB(x)		    _SB_MAKEVALUE(x, S_SMB_MB)
 
 
 /*
  * SMBus Packet Error Check register (Table 14-8)
  */
 
-#define S_SPEC_PEC                  0
-#define M_SPEC_PEC                  _SB_MAKEMASK(8, S_SPEC_PEC)
-#define V_SPEC_MB(x)                _SB_MAKEVALUE(x, S_SPEC_PEC)
+#define S_SPEC_PEC		    0
+#define M_SPEC_PEC		    _SB_MAKEMASK(8, S_SPEC_PEC)
+#define V_SPEC_MB(x)		    _SB_MAKEVALUE(x, S_SPEC_PEC)
 
 
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 
-#define S_SMB_CMDH                  8
-#define M_SMB_CMDH                  _SB_MAKEMASK(8, S_SMB_CMDH)
-#define V_SMB_CMDH(x)               _SB_MAKEVALUE(x, S_SMB_CMDH)
+#define S_SMB_CMDH		    8
+#define M_SMB_CMDH		    _SB_MAKEMASK(8, S_SMB_CMDH)
+#define V_SMB_CMDH(x)		    _SB_MAKEVALUE(x, S_SMB_CMDH)
 
 #define M_SMB_EXTEND		    _SB_MAKEMASK1(14)
 
-#define S_SMB_DFMT                  8
-#define M_SMB_DFMT                  _SB_MAKEMASK(3, S_SMB_DFMT)
-#define V_SMB_DFMT(x)               _SB_MAKEVALUE(x, S_SMB_DFMT)
-#define G_SMB_DFMT(x)               _SB_GETVALUE(x, S_SMB_DFMT, M_SMB_DFMT)
+#define S_SMB_DFMT		    8
+#define M_SMB_DFMT		    _SB_MAKEMASK(3, S_SMB_DFMT)
+#define V_SMB_DFMT(x)		    _SB_MAKEVALUE(x, S_SMB_DFMT)
+#define G_SMB_DFMT(x)		    _SB_GETVALUE(x, S_SMB_DFMT, M_SMB_DFMT)
 
-#define K_SMB_DFMT_1BYTE            0
-#define K_SMB_DFMT_2BYTE            1
-#define K_SMB_DFMT_3BYTE            2
-#define K_SMB_DFMT_4BYTE            3
-#define K_SMB_DFMT_NODATA           4
-#define K_SMB_DFMT_CMD4BYTE         5
-#define K_SMB_DFMT_CMD5BYTE         6
-#define K_SMB_DFMT_RESERVED         7
+#define K_SMB_DFMT_1BYTE	    0
+#define K_SMB_DFMT_2BYTE	    1
+#define K_SMB_DFMT_3BYTE	    2
+#define K_SMB_DFMT_4BYTE	    3
+#define K_SMB_DFMT_NODATA	    4
+#define K_SMB_DFMT_CMD4BYTE	    5
+#define K_SMB_DFMT_CMD5BYTE	    6
+#define K_SMB_DFMT_RESERVED	    7
 
 #define V_SMB_DFMT_1BYTE	    V_SMB_DFMT(K_SMB_DFMT_1BYTE)
 #define V_SMB_DFMT_2BYTE	    V_SMB_DFMT(K_SMB_DFMT_2BYTE)
@@ -182,13 +182,13 @@
 #define V_SMB_DFMT_CMD5BYTE	    V_SMB_DFMT(K_SMB_DFMT_CMD5BYTE)
 #define V_SMB_DFMT_RESERVED	    V_SMB_DFMT(K_SMB_DFMT_RESERVED)
 
-#define S_SMB_AFMT                  11
-#define M_SMB_AFMT                  _SB_MAKEMASK(2, S_SMB_AFMT)
-#define V_SMB_AFMT(x)               _SB_MAKEVALUE(x, S_SMB_AFMT)
-#define G_SMB_AFMT(x)               _SB_GETVALUE(x, S_SMB_AFMT, M_SMB_AFMT)
+#define S_SMB_AFMT		    11
+#define M_SMB_AFMT		    _SB_MAKEMASK(2, S_SMB_AFMT)
+#define V_SMB_AFMT(x)		    _SB_MAKEVALUE(x, S_SMB_AFMT)
+#define G_SMB_AFMT(x)		    _SB_GETVALUE(x, S_SMB_AFMT, M_SMB_AFMT)
 
-#define K_SMB_AFMT_NONE             0
-#define K_SMB_AFMT_ADDR             1
+#define K_SMB_AFMT_NONE		    0
+#define K_SMB_AFMT_ADDR		    1
 #define K_SMB_AFMT_ADDR_CMD1BYTE    2
 #define K_SMB_AFMT_ADDR_CMD2BYTE    3
 
diff --git a/arch/mips/include/asm/sibyte/sb1250_syncser.h b/arch/mips/include/asm/sibyte/sb1250_syncser.h
index 274e917..b3acc75 100644
--- a/arch/mips/include/asm/sibyte/sb1250_syncser.h
+++ b/arch/mips/include/asm/sibyte/sb1250_syncser.h
@@ -1,7 +1,7 @@
 /*  *********************************************************************
     *  SB1250 Board Support Package
     *
-    *  Synchronous Serial Constants              File: sb1250_syncser.h
+    *  Synchronous Serial Constants		 File: sb1250_syncser.h
     *
     *  This module contains constants and macros useful for
     *  manipulating the SB1250's Synchronous Serial
@@ -39,108 +39,108 @@
  * Serial Mode Configuration Register
  */
 
-#define M_SYNCSER_CRC_MODE                 _SB_MAKEMASK1(0)
-#define M_SYNCSER_MSB_FIRST                _SB_MAKEMASK1(1)
+#define M_SYNCSER_CRC_MODE		   _SB_MAKEMASK1(0)
+#define M_SYNCSER_MSB_FIRST		   _SB_MAKEMASK1(1)
 
-#define S_SYNCSER_FLAG_NUM                 2
-#define M_SYNCSER_FLAG_NUM                 _SB_MAKEMASK(4, S_SYNCSER_FLAG_NUM)
-#define V_SYNCSER_FLAG_NUM                 _SB_MAKEVALUE(x, S_SYNCSER_FLAG_NUM)
+#define S_SYNCSER_FLAG_NUM		   2
+#define M_SYNCSER_FLAG_NUM		   _SB_MAKEMASK(4, S_SYNCSER_FLAG_NUM)
+#define V_SYNCSER_FLAG_NUM		   _SB_MAKEVALUE(x, S_SYNCSER_FLAG_NUM)
 
-#define M_SYNCSER_FLAG_EN                  _SB_MAKEMASK1(6)
-#define M_SYNCSER_HDLC_EN                  _SB_MAKEMASK1(7)
-#define M_SYNCSER_LOOP_MODE                _SB_MAKEMASK1(8)
-#define M_SYNCSER_LOOPBACK                 _SB_MAKEMASK1(9)
+#define M_SYNCSER_FLAG_EN		   _SB_MAKEMASK1(6)
+#define M_SYNCSER_HDLC_EN		   _SB_MAKEMASK1(7)
+#define M_SYNCSER_LOOP_MODE		   _SB_MAKEMASK1(8)
+#define M_SYNCSER_LOOPBACK		   _SB_MAKEMASK1(9)
 
 /*
  * Serial Clock Source and Line Interface Mode Register
  */
 
-#define M_SYNCSER_RXCLK_INV                _SB_MAKEMASK1(0)
-#define M_SYNCSER_RXCLK_EXT                _SB_MAKEMASK1(1)
+#define M_SYNCSER_RXCLK_INV		   _SB_MAKEMASK1(0)
+#define M_SYNCSER_RXCLK_EXT		   _SB_MAKEMASK1(1)
 
-#define S_SYNCSER_RXSYNC_DLY               2
-#define M_SYNCSER_RXSYNC_DLY               _SB_MAKEMASK(2, S_SYNCSER_RXSYNC_DLY)
-#define V_SYNCSER_RXSYNC_DLY(x)            _SB_MAKEVALUE(x, S_SYNCSER_RXSYNC_DLY)
+#define S_SYNCSER_RXSYNC_DLY		   2
+#define M_SYNCSER_RXSYNC_DLY		   _SB_MAKEMASK(2, S_SYNCSER_RXSYNC_DLY)
+#define V_SYNCSER_RXSYNC_DLY(x)		   _SB_MAKEVALUE(x, S_SYNCSER_RXSYNC_DLY)
 
-#define M_SYNCSER_RXSYNC_LOW               _SB_MAKEMASK1(4)
-#define M_SYNCSER_RXSTRB_LOW               _SB_MAKEMASK1(5)
+#define M_SYNCSER_RXSYNC_LOW		   _SB_MAKEMASK1(4)
+#define M_SYNCSER_RXSTRB_LOW		   _SB_MAKEMASK1(5)
 
-#define M_SYNCSER_RXSYNC_EDGE              _SB_MAKEMASK1(6)
-#define M_SYNCSER_RXSYNC_INT               _SB_MAKEMASK1(7)
+#define M_SYNCSER_RXSYNC_EDGE		   _SB_MAKEMASK1(6)
+#define M_SYNCSER_RXSYNC_INT		   _SB_MAKEMASK1(7)
 
-#define M_SYNCSER_TXCLK_INV                _SB_MAKEMASK1(8)
-#define M_SYNCSER_TXCLK_EXT                _SB_MAKEMASK1(9)
+#define M_SYNCSER_TXCLK_INV		   _SB_MAKEMASK1(8)
+#define M_SYNCSER_TXCLK_EXT		   _SB_MAKEMASK1(9)
 
-#define S_SYNCSER_TXSYNC_DLY               10
-#define M_SYNCSER_TXSYNC_DLY               _SB_MAKEMASK(2, S_SYNCSER_TXSYNC_DLY)
-#define V_SYNCSER_TXSYNC_DLY(x)            _SB_MAKEVALUE(x, S_SYNCSER_TXSYNC_DLY)
+#define S_SYNCSER_TXSYNC_DLY		   10
+#define M_SYNCSER_TXSYNC_DLY		   _SB_MAKEMASK(2, S_SYNCSER_TXSYNC_DLY)
+#define V_SYNCSER_TXSYNC_DLY(x)		   _SB_MAKEVALUE(x, S_SYNCSER_TXSYNC_DLY)
 
-#define M_SYNCSER_TXSYNC_LOW               _SB_MAKEMASK1(12)
-#define M_SYNCSER_TXSTRB_LOW               _SB_MAKEMASK1(13)
+#define M_SYNCSER_TXSYNC_LOW		   _SB_MAKEMASK1(12)
+#define M_SYNCSER_TXSTRB_LOW		   _SB_MAKEMASK1(13)
 
-#define M_SYNCSER_TXSYNC_EDGE              _SB_MAKEMASK1(14)
-#define M_SYNCSER_TXSYNC_INT               _SB_MAKEMASK1(15)
+#define M_SYNCSER_TXSYNC_EDGE		   _SB_MAKEMASK1(14)
+#define M_SYNCSER_TXSYNC_INT		   _SB_MAKEMASK1(15)
 
 /*
  * Serial Command Register
  */
 
-#define M_SYNCSER_CMD_RX_EN                _SB_MAKEMASK1(0)
-#define M_SYNCSER_CMD_TX_EN                _SB_MAKEMASK1(1)
-#define M_SYNCSER_CMD_RX_RESET             _SB_MAKEMASK1(2)
-#define M_SYNCSER_CMD_TX_RESET             _SB_MAKEMASK1(3)
-#define M_SYNCSER_CMD_TX_PAUSE             _SB_MAKEMASK1(5)
+#define M_SYNCSER_CMD_RX_EN		   _SB_MAKEMASK1(0)
+#define M_SYNCSER_CMD_TX_EN		   _SB_MAKEMASK1(1)
+#define M_SYNCSER_CMD_RX_RESET		   _SB_MAKEMASK1(2)
+#define M_SYNCSER_CMD_TX_RESET		   _SB_MAKEMASK1(3)
+#define M_SYNCSER_CMD_TX_PAUSE		   _SB_MAKEMASK1(5)
 
 /*
  * Serial DMA Enable Register
  */
 
-#define M_SYNCSER_DMA_RX_EN                _SB_MAKEMASK1(0)
-#define M_SYNCSER_DMA_TX_EN                _SB_MAKEMASK1(4)
+#define M_SYNCSER_DMA_RX_EN		   _SB_MAKEMASK1(0)
+#define M_SYNCSER_DMA_TX_EN		   _SB_MAKEMASK1(4)
 
 /*
  * Serial Status Register
  */
 
-#define M_SYNCSER_RX_CRCERR                _SB_MAKEMASK1(0)
-#define M_SYNCSER_RX_ABORT                 _SB_MAKEMASK1(1)
-#define M_SYNCSER_RX_OCTET                 _SB_MAKEMASK1(2)
-#define M_SYNCSER_RX_LONGFRM               _SB_MAKEMASK1(3)
-#define M_SYNCSER_RX_SHORTFRM              _SB_MAKEMASK1(4)
-#define M_SYNCSER_RX_OVERRUN               _SB_MAKEMASK1(5)
-#define M_SYNCSER_RX_SYNC_ERR              _SB_MAKEMASK1(6)
-#define M_SYNCSER_TX_CRCERR                _SB_MAKEMASK1(8)
-#define M_SYNCSER_TX_UNDERRUN              _SB_MAKEMASK1(9)
-#define M_SYNCSER_TX_SYNC_ERR              _SB_MAKEMASK1(10)
-#define M_SYNCSER_TX_PAUSE_COMPLETE        _SB_MAKEMASK1(11)
-#define M_SYNCSER_RX_EOP_COUNT             _SB_MAKEMASK1(16)
-#define M_SYNCSER_RX_EOP_TIMER             _SB_MAKEMASK1(17)
-#define M_SYNCSER_RX_EOP_SEEN              _SB_MAKEMASK1(18)
-#define M_SYNCSER_RX_HWM                   _SB_MAKEMASK1(19)
-#define M_SYNCSER_RX_LWM                   _SB_MAKEMASK1(20)
-#define M_SYNCSER_RX_DSCR                  _SB_MAKEMASK1(21)
-#define M_SYNCSER_RX_DERR                  _SB_MAKEMASK1(22)
-#define M_SYNCSER_TX_EOP_COUNT             _SB_MAKEMASK1(24)
-#define M_SYNCSER_TX_EOP_TIMER             _SB_MAKEMASK1(25)
-#define M_SYNCSER_TX_EOP_SEEN              _SB_MAKEMASK1(26)
-#define M_SYNCSER_TX_HWM                   _SB_MAKEMASK1(27)
-#define M_SYNCSER_TX_LWM                   _SB_MAKEMASK1(28)
-#define M_SYNCSER_TX_DSCR                  _SB_MAKEMASK1(29)
-#define M_SYNCSER_TX_DERR                  _SB_MAKEMASK1(30)
-#define M_SYNCSER_TX_DZERO                 _SB_MAKEMASK1(31)
+#define M_SYNCSER_RX_CRCERR		   _SB_MAKEMASK1(0)
+#define M_SYNCSER_RX_ABORT		   _SB_MAKEMASK1(1)
+#define M_SYNCSER_RX_OCTET		   _SB_MAKEMASK1(2)
+#define M_SYNCSER_RX_LONGFRM		   _SB_MAKEMASK1(3)
+#define M_SYNCSER_RX_SHORTFRM		   _SB_MAKEMASK1(4)
+#define M_SYNCSER_RX_OVERRUN		   _SB_MAKEMASK1(5)
+#define M_SYNCSER_RX_SYNC_ERR		   _SB_MAKEMASK1(6)
+#define M_SYNCSER_TX_CRCERR		   _SB_MAKEMASK1(8)
+#define M_SYNCSER_TX_UNDERRUN		   _SB_MAKEMASK1(9)
+#define M_SYNCSER_TX_SYNC_ERR		   _SB_MAKEMASK1(10)
+#define M_SYNCSER_TX_PAUSE_COMPLETE	   _SB_MAKEMASK1(11)
+#define M_SYNCSER_RX_EOP_COUNT		   _SB_MAKEMASK1(16)
+#define M_SYNCSER_RX_EOP_TIMER		   _SB_MAKEMASK1(17)
+#define M_SYNCSER_RX_EOP_SEEN		   _SB_MAKEMASK1(18)
+#define M_SYNCSER_RX_HWM		   _SB_MAKEMASK1(19)
+#define M_SYNCSER_RX_LWM		   _SB_MAKEMASK1(20)
+#define M_SYNCSER_RX_DSCR		   _SB_MAKEMASK1(21)
+#define M_SYNCSER_RX_DERR		   _SB_MAKEMASK1(22)
+#define M_SYNCSER_TX_EOP_COUNT		   _SB_MAKEMASK1(24)
+#define M_SYNCSER_TX_EOP_TIMER		   _SB_MAKEMASK1(25)
+#define M_SYNCSER_TX_EOP_SEEN		   _SB_MAKEMASK1(26)
+#define M_SYNCSER_TX_HWM		   _SB_MAKEMASK1(27)
+#define M_SYNCSER_TX_LWM		   _SB_MAKEMASK1(28)
+#define M_SYNCSER_TX_DSCR		   _SB_MAKEMASK1(29)
+#define M_SYNCSER_TX_DERR		   _SB_MAKEMASK1(30)
+#define M_SYNCSER_TX_DZERO		   _SB_MAKEMASK1(31)
 
 /*
  * Sequencer Table Entry format
  */
 
-#define M_SYNCSER_SEQ_LAST                 _SB_MAKEMASK1(0)
-#define M_SYNCSER_SEQ_BYTE                 _SB_MAKEMASK1(1)
+#define M_SYNCSER_SEQ_LAST		   _SB_MAKEMASK1(0)
+#define M_SYNCSER_SEQ_BYTE		   _SB_MAKEMASK1(1)
 
-#define S_SYNCSER_SEQ_COUNT                2
-#define M_SYNCSER_SEQ_COUNT                _SB_MAKEMASK(4, S_SYNCSER_SEQ_COUNT)
-#define V_SYNCSER_SEQ_COUNT(x)             _SB_MAKEVALUE(x, S_SYNCSER_SEQ_COUNT)
+#define S_SYNCSER_SEQ_COUNT		   2
+#define M_SYNCSER_SEQ_COUNT		   _SB_MAKEMASK(4, S_SYNCSER_SEQ_COUNT)
+#define V_SYNCSER_SEQ_COUNT(x)		   _SB_MAKEVALUE(x, S_SYNCSER_SEQ_COUNT)
 
-#define M_SYNCSER_SEQ_ENABLE               _SB_MAKEMASK1(6)
-#define M_SYNCSER_SEQ_STROBE               _SB_MAKEMASK1(7)
+#define M_SYNCSER_SEQ_ENABLE		   _SB_MAKEMASK1(6)
+#define M_SYNCSER_SEQ_STROBE		   _SB_MAKEMASK1(7)
 
 #endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_uart.h b/arch/mips/include/asm/sibyte/sb1250_uart.h
index bb99ecac..a43dc19 100644
--- a/arch/mips/include/asm/sibyte/sb1250_uart.h
+++ b/arch/mips/include/asm/sibyte/sb1250_uart.h
@@ -45,33 +45,33 @@
  * Register: DUART_MODE_REG_1_B
  */
 
-#define S_DUART_BITS_PER_CHAR       0
-#define M_DUART_BITS_PER_CHAR       _SB_MAKEMASK(2, S_DUART_BITS_PER_CHAR)
+#define S_DUART_BITS_PER_CHAR	    0
+#define M_DUART_BITS_PER_CHAR	    _SB_MAKEMASK(2, S_DUART_BITS_PER_CHAR)
 #define V_DUART_BITS_PER_CHAR(x)    _SB_MAKEVALUE(x, S_DUART_BITS_PER_CHAR)
 
 #define K_DUART_BITS_PER_CHAR_RSV0  0
 #define K_DUART_BITS_PER_CHAR_RSV1  1
-#define K_DUART_BITS_PER_CHAR_7     2
-#define K_DUART_BITS_PER_CHAR_8     3
+#define K_DUART_BITS_PER_CHAR_7	    2
+#define K_DUART_BITS_PER_CHAR_8	    3
 
 #define V_DUART_BITS_PER_CHAR_RSV0  V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV0)
 #define V_DUART_BITS_PER_CHAR_RSV1  V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV1)
-#define V_DUART_BITS_PER_CHAR_7     V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_7)
-#define V_DUART_BITS_PER_CHAR_8     V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_8)
+#define V_DUART_BITS_PER_CHAR_7	    V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_7)
+#define V_DUART_BITS_PER_CHAR_8	    V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_8)
 
 
 #define M_DUART_PARITY_TYPE_EVEN    0x00
-#define M_DUART_PARITY_TYPE_ODD     _SB_MAKEMASK1(2)
+#define M_DUART_PARITY_TYPE_ODD	    _SB_MAKEMASK1(2)
 
-#define S_DUART_PARITY_MODE          3
-#define M_DUART_PARITY_MODE         _SB_MAKEMASK(2, S_DUART_PARITY_MODE)
-#define V_DUART_PARITY_MODE(x)      _SB_MAKEVALUE(x, S_DUART_PARITY_MODE)
+#define S_DUART_PARITY_MODE	     3
+#define M_DUART_PARITY_MODE	    _SB_MAKEMASK(2, S_DUART_PARITY_MODE)
+#define V_DUART_PARITY_MODE(x)	    _SB_MAKEVALUE(x, S_DUART_PARITY_MODE)
 
-#define K_DUART_PARITY_MODE_ADD       0
+#define K_DUART_PARITY_MODE_ADD	      0
 #define K_DUART_PARITY_MODE_ADD_FIXED 1
 #define K_DUART_PARITY_MODE_NONE      2
 
-#define V_DUART_PARITY_MODE_ADD       V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD)
+#define V_DUART_PARITY_MODE_ADD	      V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD)
 #define V_DUART_PARITY_MODE_ADD_FIXED V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD_FIXED)
 #define V_DUART_PARITY_MODE_NONE      V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_NONE)
 
@@ -81,7 +81,7 @@
 #define M_DUART_RX_IRQ_SEL_RXRDY    0
 #define M_DUART_RX_IRQ_SEL_RXFULL   _SB_MAKEMASK1(6)
 
-#define M_DUART_RX_RTS_ENA          _SB_MAKEMASK1(7)
+#define M_DUART_RX_RTS_ENA	    _SB_MAKEMASK1(7)
 
 /*
  * DUART Mode Register #2 (Table 10-4)
@@ -89,18 +89,18 @@
  * Register: DUART_MODE_REG_2_B
  */
 
-#define M_DUART_MODE_RESERVED1      _SB_MAKEMASK(3, 0)   /* ignored */
+#define M_DUART_MODE_RESERVED1	    _SB_MAKEMASK(3, 0)	 /* ignored */
 
-#define M_DUART_STOP_BIT_LEN_2      _SB_MAKEMASK1(3)
-#define M_DUART_STOP_BIT_LEN_1      0
+#define M_DUART_STOP_BIT_LEN_2	    _SB_MAKEMASK1(3)
+#define M_DUART_STOP_BIT_LEN_1	    0
 
-#define M_DUART_TX_CTS_ENA          _SB_MAKEMASK1(4)
+#define M_DUART_TX_CTS_ENA	    _SB_MAKEMASK1(4)
 
 
-#define M_DUART_MODE_RESERVED2      _SB_MAKEMASK1(5)    /* must be zero */
+#define M_DUART_MODE_RESERVED2	    _SB_MAKEMASK1(5)	/* must be zero */
 
 #define S_DUART_CHAN_MODE	    6
-#define M_DUART_CHAN_MODE           _SB_MAKEMASK(2, S_DUART_CHAN_MODE)
+#define M_DUART_CHAN_MODE	    _SB_MAKEMASK(2, S_DUART_CHAN_MODE)
 #define V_DUART_CHAN_MODE(x)	    _SB_MAKEVALUE(x, S_DUART_CHAN_MODE)
 
 #define K_DUART_CHAN_MODE_NORMAL    0
@@ -117,34 +117,34 @@
  * Register: DUART_CMD_B
  */
 
-#define M_DUART_RX_EN               _SB_MAKEMASK1(0)
-#define M_DUART_RX_DIS              _SB_MAKEMASK1(1)
-#define M_DUART_TX_EN               _SB_MAKEMASK1(2)
-#define M_DUART_TX_DIS              _SB_MAKEMASK1(3)
+#define M_DUART_RX_EN		    _SB_MAKEMASK1(0)
+#define M_DUART_RX_DIS		    _SB_MAKEMASK1(1)
+#define M_DUART_TX_EN		    _SB_MAKEMASK1(2)
+#define M_DUART_TX_DIS		    _SB_MAKEMASK1(3)
 
 #define S_DUART_MISC_CMD	    4
-#define M_DUART_MISC_CMD            _SB_MAKEMASK(3, S_DUART_MISC_CMD)
-#define V_DUART_MISC_CMD(x)         _SB_MAKEVALUE(x, S_DUART_MISC_CMD)
+#define M_DUART_MISC_CMD	    _SB_MAKEMASK(3, S_DUART_MISC_CMD)
+#define V_DUART_MISC_CMD(x)	    _SB_MAKEVALUE(x, S_DUART_MISC_CMD)
 
-#define K_DUART_MISC_CMD_NOACTION0       0
-#define K_DUART_MISC_CMD_NOACTION1       1
-#define K_DUART_MISC_CMD_RESET_RX        2
-#define K_DUART_MISC_CMD_RESET_TX        3
-#define K_DUART_MISC_CMD_NOACTION4       4
+#define K_DUART_MISC_CMD_NOACTION0	 0
+#define K_DUART_MISC_CMD_NOACTION1	 1
+#define K_DUART_MISC_CMD_RESET_RX	 2
+#define K_DUART_MISC_CMD_RESET_TX	 3
+#define K_DUART_MISC_CMD_NOACTION4	 4
 #define K_DUART_MISC_CMD_RESET_BREAK_INT 5
-#define K_DUART_MISC_CMD_START_BREAK     6
-#define K_DUART_MISC_CMD_STOP_BREAK      7
+#define K_DUART_MISC_CMD_START_BREAK	 6
+#define K_DUART_MISC_CMD_STOP_BREAK	 7
 
-#define V_DUART_MISC_CMD_NOACTION0       V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION0)
-#define V_DUART_MISC_CMD_NOACTION1       V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION1)
-#define V_DUART_MISC_CMD_RESET_RX        V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_RX)
-#define V_DUART_MISC_CMD_RESET_TX        V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_TX)
-#define V_DUART_MISC_CMD_NOACTION4       V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION4)
+#define V_DUART_MISC_CMD_NOACTION0	 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION0)
+#define V_DUART_MISC_CMD_NOACTION1	 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION1)
+#define V_DUART_MISC_CMD_RESET_RX	 V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_RX)
+#define V_DUART_MISC_CMD_RESET_TX	 V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_TX)
+#define V_DUART_MISC_CMD_NOACTION4	 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION4)
 #define V_DUART_MISC_CMD_RESET_BREAK_INT V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_BREAK_INT)
-#define V_DUART_MISC_CMD_START_BREAK     V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK)
-#define V_DUART_MISC_CMD_STOP_BREAK      V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK)
+#define V_DUART_MISC_CMD_START_BREAK	 V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK)
+#define V_DUART_MISC_CMD_STOP_BREAK	 V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK)
 
-#define M_DUART_CMD_RESERVED             _SB_MAKEMASK1(7)
+#define M_DUART_CMD_RESERVED		 _SB_MAKEMASK1(7)
 
 /*
  * DUART Status Register (Table 10-6)
@@ -153,14 +153,14 @@
  * READ-ONLY
  */
 
-#define M_DUART_RX_RDY              _SB_MAKEMASK1(0)
-#define M_DUART_RX_FFUL             _SB_MAKEMASK1(1)
-#define M_DUART_TX_RDY              _SB_MAKEMASK1(2)
-#define M_DUART_TX_EMT              _SB_MAKEMASK1(3)
-#define M_DUART_OVRUN_ERR           _SB_MAKEMASK1(4)
-#define M_DUART_PARITY_ERR          _SB_MAKEMASK1(5)
-#define M_DUART_FRM_ERR             _SB_MAKEMASK1(6)
-#define M_DUART_RCVD_BRK            _SB_MAKEMASK1(7)
+#define M_DUART_RX_RDY		    _SB_MAKEMASK1(0)
+#define M_DUART_RX_FFUL		    _SB_MAKEMASK1(1)
+#define M_DUART_TX_RDY		    _SB_MAKEMASK1(2)
+#define M_DUART_TX_EMT		    _SB_MAKEMASK1(3)
+#define M_DUART_OVRUN_ERR	    _SB_MAKEMASK1(4)
+#define M_DUART_PARITY_ERR	    _SB_MAKEMASK1(5)
+#define M_DUART_FRM_ERR		    _SB_MAKEMASK1(6)
+#define M_DUART_RCVD_BRK	    _SB_MAKEMASK1(7)
 
 /*
  * DUART Baud Rate Register (Table 10-7)
@@ -168,8 +168,8 @@
  * Register: DUART_CLK_SEL_B
  */
 
-#define M_DUART_CLK_COUNTER         _SB_MAKEMASK(12, 0)
-#define V_DUART_BAUD_RATE(x)        (100000000/((x)*20)-1)
+#define M_DUART_CLK_COUNTER	    _SB_MAKEMASK(12, 0)
+#define V_DUART_BAUD_RATE(x)	    (100000000/((x)*20)-1)
 
 /*
  * DUART Data Registers (Table 10-8 and 10-9)
@@ -179,33 +179,33 @@
  * Register: DUART_TX_HOLD_B
  */
 
-#define M_DUART_RX_DATA             _SB_MAKEMASK(8, 0)
-#define M_DUART_TX_DATA             _SB_MAKEMASK(8, 0)
+#define M_DUART_RX_DATA		    _SB_MAKEMASK(8, 0)
+#define M_DUART_TX_DATA		    _SB_MAKEMASK(8, 0)
 
 /*
  * DUART Input Port Register (Table 10-10)
  * Register: DUART_IN_PORT
  */
 
-#define M_DUART_IN_PIN0_VAL         _SB_MAKEMASK1(0)
-#define M_DUART_IN_PIN1_VAL         _SB_MAKEMASK1(1)
-#define M_DUART_IN_PIN2_VAL         _SB_MAKEMASK1(2)
-#define M_DUART_IN_PIN3_VAL         _SB_MAKEMASK1(3)
-#define M_DUART_IN_PIN4_VAL         _SB_MAKEMASK1(4)
-#define M_DUART_IN_PIN5_VAL         _SB_MAKEMASK1(5)
-#define M_DUART_RIN0_PIN            _SB_MAKEMASK1(6)
-#define M_DUART_RIN1_PIN            _SB_MAKEMASK1(7)
+#define M_DUART_IN_PIN0_VAL	    _SB_MAKEMASK1(0)
+#define M_DUART_IN_PIN1_VAL	    _SB_MAKEMASK1(1)
+#define M_DUART_IN_PIN2_VAL	    _SB_MAKEMASK1(2)
+#define M_DUART_IN_PIN3_VAL	    _SB_MAKEMASK1(3)
+#define M_DUART_IN_PIN4_VAL	    _SB_MAKEMASK1(4)
+#define M_DUART_IN_PIN5_VAL	    _SB_MAKEMASK1(5)
+#define M_DUART_RIN0_PIN	    _SB_MAKEMASK1(6)
+#define M_DUART_RIN1_PIN	    _SB_MAKEMASK1(7)
 
 /*
  * DUART Input Port Change Status Register (Tables 10-11, 10-12, and 10-13)
  * Register: DUART_INPORT_CHNG
  */
 
-#define S_DUART_IN_PIN_VAL          0
-#define M_DUART_IN_PIN_VAL          _SB_MAKEMASK(4, S_DUART_IN_PIN_VAL)
+#define S_DUART_IN_PIN_VAL	    0
+#define M_DUART_IN_PIN_VAL	    _SB_MAKEMASK(4, S_DUART_IN_PIN_VAL)
 
-#define S_DUART_IN_PIN_CHNG         4
-#define M_DUART_IN_PIN_CHNG         _SB_MAKEMASK(4, S_DUART_IN_PIN_CHNG)
+#define S_DUART_IN_PIN_CHNG	    4
+#define M_DUART_IN_PIN_CHNG	    _SB_MAKEMASK(4, S_DUART_IN_PIN_CHNG)
 
 
 /*
@@ -213,46 +213,46 @@
  * Register: DUART_OPCR
  */
 
-#define M_DUART_OPCR_RESERVED0      _SB_MAKEMASK1(0)   /* must be zero */
-#define M_DUART_OPC2_SEL            _SB_MAKEMASK1(1)
-#define M_DUART_OPCR_RESERVED1      _SB_MAKEMASK1(2)   /* must be zero */
-#define M_DUART_OPC3_SEL            _SB_MAKEMASK1(3)
-#define M_DUART_OPCR_RESERVED2      _SB_MAKEMASK(4, 4)  /* must be zero */
+#define M_DUART_OPCR_RESERVED0	    _SB_MAKEMASK1(0)   /* must be zero */
+#define M_DUART_OPC2_SEL	    _SB_MAKEMASK1(1)
+#define M_DUART_OPCR_RESERVED1	    _SB_MAKEMASK1(2)   /* must be zero */
+#define M_DUART_OPC3_SEL	    _SB_MAKEMASK1(3)
+#define M_DUART_OPCR_RESERVED2	    _SB_MAKEMASK(4, 4)	/* must be zero */
 
 /*
  * DUART Aux Control Register (Table 10-15)
  * Register: DUART_AUX_CTRL
  */
 
-#define M_DUART_IP0_CHNG_ENA        _SB_MAKEMASK1(0)
-#define M_DUART_IP1_CHNG_ENA        _SB_MAKEMASK1(1)
-#define M_DUART_IP2_CHNG_ENA        _SB_MAKEMASK1(2)
-#define M_DUART_IP3_CHNG_ENA        _SB_MAKEMASK1(3)
-#define M_DUART_ACR_RESERVED        _SB_MAKEMASK(4, 4)
+#define M_DUART_IP0_CHNG_ENA	    _SB_MAKEMASK1(0)
+#define M_DUART_IP1_CHNG_ENA	    _SB_MAKEMASK1(1)
+#define M_DUART_IP2_CHNG_ENA	    _SB_MAKEMASK1(2)
+#define M_DUART_IP3_CHNG_ENA	    _SB_MAKEMASK1(3)
+#define M_DUART_ACR_RESERVED	    _SB_MAKEMASK(4, 4)
 
-#define M_DUART_CTS_CHNG_ENA        _SB_MAKEMASK1(0)
-#define M_DUART_CIN_CHNG_ENA        _SB_MAKEMASK1(2)
+#define M_DUART_CTS_CHNG_ENA	    _SB_MAKEMASK1(0)
+#define M_DUART_CIN_CHNG_ENA	    _SB_MAKEMASK1(2)
 
 /*
  * DUART Interrupt Status Register (Table 10-16)
  * Register: DUART_ISR
  */
 
-#define M_DUART_ISR_TX_A            _SB_MAKEMASK1(0)
+#define M_DUART_ISR_TX_A	    _SB_MAKEMASK1(0)
 
-#define S_DUART_ISR_RX_A            1
-#define M_DUART_ISR_RX_A            _SB_MAKEMASK1(S_DUART_ISR_RX_A)
-#define V_DUART_ISR_RX_A(x)         _SB_MAKEVALUE(x, S_DUART_ISR_RX_A)
-#define G_DUART_ISR_RX_A(x)         _SB_GETVALUE(x, S_DUART_ISR_RX_A, M_DUART_ISR_RX_A)
+#define S_DUART_ISR_RX_A	    1
+#define M_DUART_ISR_RX_A	    _SB_MAKEMASK1(S_DUART_ISR_RX_A)
+#define V_DUART_ISR_RX_A(x)	    _SB_MAKEVALUE(x, S_DUART_ISR_RX_A)
+#define G_DUART_ISR_RX_A(x)	    _SB_GETVALUE(x, S_DUART_ISR_RX_A, M_DUART_ISR_RX_A)
 
-#define M_DUART_ISR_BRK_A           _SB_MAKEMASK1(2)
-#define M_DUART_ISR_IN_A            _SB_MAKEMASK1(3)
+#define M_DUART_ISR_BRK_A	    _SB_MAKEMASK1(2)
+#define M_DUART_ISR_IN_A	    _SB_MAKEMASK1(3)
 #define M_DUART_ISR_ALL_A	    _SB_MAKEMASK(4, 0)
 
-#define M_DUART_ISR_TX_B            _SB_MAKEMASK1(4)
-#define M_DUART_ISR_RX_B            _SB_MAKEMASK1(5)
-#define M_DUART_ISR_BRK_B           _SB_MAKEMASK1(6)
-#define M_DUART_ISR_IN_B            _SB_MAKEMASK1(7)
+#define M_DUART_ISR_TX_B	    _SB_MAKEMASK1(4)
+#define M_DUART_ISR_RX_B	    _SB_MAKEMASK1(5)
+#define M_DUART_ISR_BRK_B	    _SB_MAKEMASK1(6)
+#define M_DUART_ISR_IN_B	    _SB_MAKEMASK1(7)
 #define M_DUART_ISR_ALL_B	    _SB_MAKEMASK(4, 4)
 
 /*
@@ -262,29 +262,29 @@
  * Register: DUART_ISR_B
  */
 
-#define M_DUART_ISR_TX              _SB_MAKEMASK1(0)
-#define M_DUART_ISR_RX              _SB_MAKEMASK1(1)
-#define M_DUART_ISR_BRK             _SB_MAKEMASK1(2)
-#define M_DUART_ISR_IN              _SB_MAKEMASK1(3)
+#define M_DUART_ISR_TX		    _SB_MAKEMASK1(0)
+#define M_DUART_ISR_RX		    _SB_MAKEMASK1(1)
+#define M_DUART_ISR_BRK		    _SB_MAKEMASK1(2)
+#define M_DUART_ISR_IN		    _SB_MAKEMASK1(3)
 #define M_DUART_ISR_ALL		    _SB_MAKEMASK(4, 0)
-#define M_DUART_ISR_RESERVED        _SB_MAKEMASK(4, 4)
+#define M_DUART_ISR_RESERVED	    _SB_MAKEMASK(4, 4)
 
 /*
  * DUART Interrupt Mask Register (Table 10-19)
  * Register: DUART_IMR
  */
 
-#define M_DUART_IMR_TX_A            _SB_MAKEMASK1(0)
-#define M_DUART_IMR_RX_A            _SB_MAKEMASK1(1)
-#define M_DUART_IMR_BRK_A           _SB_MAKEMASK1(2)
-#define M_DUART_IMR_IN_A            _SB_MAKEMASK1(3)
+#define M_DUART_IMR_TX_A	    _SB_MAKEMASK1(0)
+#define M_DUART_IMR_RX_A	    _SB_MAKEMASK1(1)
+#define M_DUART_IMR_BRK_A	    _SB_MAKEMASK1(2)
+#define M_DUART_IMR_IN_A	    _SB_MAKEMASK1(3)
 #define M_DUART_IMR_ALL_A	    _SB_MAKEMASK(4, 0)
 
-#define M_DUART_IMR_TX_B            _SB_MAKEMASK1(4)
-#define M_DUART_IMR_RX_B            _SB_MAKEMASK1(5)
-#define M_DUART_IMR_BRK_B           _SB_MAKEMASK1(6)
-#define M_DUART_IMR_IN_B            _SB_MAKEMASK1(7)
-#define M_DUART_IMR_ALL_B           _SB_MAKEMASK(4, 4)
+#define M_DUART_IMR_TX_B	    _SB_MAKEMASK1(4)
+#define M_DUART_IMR_RX_B	    _SB_MAKEMASK1(5)
+#define M_DUART_IMR_BRK_B	    _SB_MAKEMASK1(6)
+#define M_DUART_IMR_IN_B	    _SB_MAKEMASK1(7)
+#define M_DUART_IMR_ALL_B	    _SB_MAKEMASK(4, 4)
 
 /*
  * DUART Channel A Interrupt Mask Register (Table 10-20)
@@ -293,12 +293,12 @@
  * Register: DUART_IMR_B
  */
 
-#define M_DUART_IMR_TX              _SB_MAKEMASK1(0)
-#define M_DUART_IMR_RX              _SB_MAKEMASK1(1)
-#define M_DUART_IMR_BRK             _SB_MAKEMASK1(2)
-#define M_DUART_IMR_IN              _SB_MAKEMASK1(3)
+#define M_DUART_IMR_TX		    _SB_MAKEMASK1(0)
+#define M_DUART_IMR_RX		    _SB_MAKEMASK1(1)
+#define M_DUART_IMR_BRK		    _SB_MAKEMASK1(2)
+#define M_DUART_IMR_IN		    _SB_MAKEMASK1(3)
 #define M_DUART_IMR_ALL		    _SB_MAKEMASK(4, 0)
-#define M_DUART_IMR_RESERVED        _SB_MAKEMASK(4, 4)
+#define M_DUART_IMR_RESERVED	    _SB_MAKEMASK(4, 4)
 
 
 /*
@@ -306,33 +306,33 @@
  * Register: DUART_SET_OPR
  */
 
-#define M_DUART_SET_OPR0            _SB_MAKEMASK1(0)
-#define M_DUART_SET_OPR1            _SB_MAKEMASK1(1)
-#define M_DUART_SET_OPR2            _SB_MAKEMASK1(2)
-#define M_DUART_SET_OPR3            _SB_MAKEMASK1(3)
-#define M_DUART_OPSR_RESERVED       _SB_MAKEMASK(4, 4)
+#define M_DUART_SET_OPR0	    _SB_MAKEMASK1(0)
+#define M_DUART_SET_OPR1	    _SB_MAKEMASK1(1)
+#define M_DUART_SET_OPR2	    _SB_MAKEMASK1(2)
+#define M_DUART_SET_OPR3	    _SB_MAKEMASK1(3)
+#define M_DUART_OPSR_RESERVED	    _SB_MAKEMASK(4, 4)
 
 /*
  * DUART Output Port Clear Register (Table 10-23)
  * Register: DUART_CLEAR_OPR
  */
 
-#define M_DUART_CLR_OPR0            _SB_MAKEMASK1(0)
-#define M_DUART_CLR_OPR1            _SB_MAKEMASK1(1)
-#define M_DUART_CLR_OPR2            _SB_MAKEMASK1(2)
-#define M_DUART_CLR_OPR3            _SB_MAKEMASK1(3)
-#define M_DUART_OPCR_RESERVED       _SB_MAKEMASK(4, 4)
+#define M_DUART_CLR_OPR0	    _SB_MAKEMASK1(0)
+#define M_DUART_CLR_OPR1	    _SB_MAKEMASK1(1)
+#define M_DUART_CLR_OPR2	    _SB_MAKEMASK1(2)
+#define M_DUART_CLR_OPR3	    _SB_MAKEMASK1(3)
+#define M_DUART_OPCR_RESERVED	    _SB_MAKEMASK(4, 4)
 
 /*
  * DUART Output Port RTS Register (Table 10-24)
  * Register: DUART_OUT_PORT
  */
 
-#define M_DUART_OUT_PIN_SET0        _SB_MAKEMASK1(0)
-#define M_DUART_OUT_PIN_SET1        _SB_MAKEMASK1(1)
-#define M_DUART_OUT_PIN_CLR0        _SB_MAKEMASK1(2)
-#define M_DUART_OUT_PIN_CLR1        _SB_MAKEMASK1(3)
-#define M_DUART_OPRR_RESERVED       _SB_MAKEMASK(4, 4)
+#define M_DUART_OUT_PIN_SET0	    _SB_MAKEMASK1(0)
+#define M_DUART_OUT_PIN_SET1	    _SB_MAKEMASK1(1)
+#define M_DUART_OUT_PIN_CLR0	    _SB_MAKEMASK1(2)
+#define M_DUART_OUT_PIN_CLR1	    _SB_MAKEMASK1(3)
+#define M_DUART_OPRR_RESERVED	    _SB_MAKEMASK(4, 4)
 
 #define M_DUART_OUT_PIN_SET(chan) \
     (chan == 0 ? M_DUART_OUT_PIN_SET0 : M_DUART_OUT_PIN_SET1)
@@ -344,15 +344,15 @@
  * Full Interrupt Control Register
  */
 
-#define S_DUART_SIG_FULL           _SB_MAKE64(0)
-#define M_DUART_SIG_FULL           _SB_MAKEMASK(4, S_DUART_SIG_FULL)
-#define V_DUART_SIG_FULL(x)        _SB_MAKEVALUE(x, S_DUART_SIG_FULL)
-#define G_DUART_SIG_FULL(x)        _SB_GETVALUE(x, S_DUART_SIG_FULL, M_DUART_SIG_FULL)
+#define S_DUART_SIG_FULL	   _SB_MAKE64(0)
+#define M_DUART_SIG_FULL	   _SB_MAKEMASK(4, S_DUART_SIG_FULL)
+#define V_DUART_SIG_FULL(x)	   _SB_MAKEVALUE(x, S_DUART_SIG_FULL)
+#define G_DUART_SIG_FULL(x)	   _SB_GETVALUE(x, S_DUART_SIG_FULL, M_DUART_SIG_FULL)
 
-#define S_DUART_INT_TIME           _SB_MAKE64(4)
-#define M_DUART_INT_TIME           _SB_MAKEMASK(4, S_DUART_INT_TIME)
-#define V_DUART_INT_TIME(x)        _SB_MAKEVALUE(x, S_DUART_INT_TIME)
-#define G_DUART_INT_TIME(x)        _SB_GETVALUE(x, S_DUART_INT_TIME, M_DUART_INT_TIME)
+#define S_DUART_INT_TIME	   _SB_MAKE64(4)
+#define M_DUART_INT_TIME	   _SB_MAKEMASK(4, S_DUART_INT_TIME)
+#define V_DUART_INT_TIME(x)	   _SB_MAKEVALUE(x, S_DUART_INT_TIME)
+#define G_DUART_INT_TIME(x)	   _SB_GETVALUE(x, S_DUART_INT_TIME, M_DUART_INT_TIME)
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 
diff --git a/arch/mips/include/asm/sibyte/sentosa.h b/arch/mips/include/asm/sibyte/sentosa.h
index 64c4787..0351a46 100644
--- a/arch/mips/include/asm/sibyte/sentosa.h
+++ b/arch/mips/include/asm/sibyte/sentosa.h
@@ -30,11 +30,11 @@
 
 /* Generic bus chip selects */
 #ifdef CONFIG_SIBYTE_RHONE
-#define LEDS_CS         6
-#define LEDS_PHYS       0x1d0a0000
+#define LEDS_CS		6
+#define LEDS_PHYS	0x1d0a0000
 #endif
 
 /* GPIOs */
-#define K_GPIO_DBG_LED  0
+#define K_GPIO_DBG_LED	0
 
 #endif /* __ASM_SIBYTE_SENTOSA_H */
diff --git a/arch/mips/include/asm/sibyte/swarm.h b/arch/mips/include/asm/sibyte/swarm.h
index 114d9d2..187cfb1 100644
--- a/arch/mips/include/asm/sibyte/swarm.h
+++ b/arch/mips/include/asm/sibyte/swarm.h
@@ -24,41 +24,41 @@
 #ifdef CONFIG_SIBYTE_SWARM
 #define SIBYTE_BOARD_NAME "BCM91250A (SWARM)"
 #define SIBYTE_HAVE_PCMCIA 1
-#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_HAVE_IDE	   1
 #endif
 #ifdef CONFIG_SIBYTE_LITTLESUR
 #define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)"
 #define SIBYTE_HAVE_PCMCIA 0
-#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_HAVE_IDE	   1
 #define SIBYTE_DEFAULT_CONSOLE "cfe0"
 #endif
 #ifdef CONFIG_SIBYTE_CRHONE
 #define SIBYTE_BOARD_NAME "BCM91125C (CRhone)"
 #define SIBYTE_HAVE_PCMCIA 0
-#define SIBYTE_HAVE_IDE    0
+#define SIBYTE_HAVE_IDE	   0
 #endif
 #ifdef CONFIG_SIBYTE_CRHINE
 #define SIBYTE_BOARD_NAME "BCM91120C (CRhine)"
 #define SIBYTE_HAVE_PCMCIA 0
-#define SIBYTE_HAVE_IDE    0
+#define SIBYTE_HAVE_IDE	   0
 #endif
 
 /* Generic bus chip selects */
-#define LEDS_CS         3
-#define LEDS_PHYS       0x100a0000
+#define LEDS_CS		3
+#define LEDS_PHYS	0x100a0000
 
 #ifdef SIBYTE_HAVE_IDE
-#define IDE_CS          4
-#define IDE_PHYS        0x100b0000
-#define K_GPIO_GB_IDE   4
-#define K_INT_GB_IDE    (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#define IDE_CS		4
+#define IDE_PHYS	0x100b0000
+#define K_GPIO_GB_IDE	4
+#define K_INT_GB_IDE	(K_INT_GPIO_0 + K_GPIO_GB_IDE)
 #endif
 
 #ifdef SIBYTE_HAVE_PCMCIA
-#define PCMCIA_CS       6
-#define PCMCIA_PHYS     0x11000000
+#define PCMCIA_CS	6
+#define PCMCIA_PHYS	0x11000000
 #define K_GPIO_PC_READY 9
-#define K_INT_PC_READY  (K_INT_GPIO_0 + K_GPIO_PC_READY)
+#define K_INT_PC_READY	(K_INT_GPIO_0 + K_GPIO_PC_READY)
 #endif
 
 #endif /* __ASM_SIBYTE_SWARM_H */
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index f33b5fd..eb60087 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -26,7 +26,7 @@
 #define raw_smp_processor_id() (current_thread_info()->cpu)
 
 /* Map from cpu id to sequential logical cpu number.  This will only
-   not be idempotent when cpus failed to come on-line.  */
+   not be idempotent when cpus failed to come on-line.	*/
 extern int __cpu_number_map[NR_CPUS];
 #define cpu_number_map(cpu)  __cpu_number_map[cpu]
 
@@ -36,7 +36,7 @@
 
 #define NO_PROC_ID	(-1)
 
-#define SMP_RESCHEDULE_YOURSELF	0x1	/* XXX braindead */
+#define SMP_RESCHEDULE_YOURSELF 0x1	/* XXX braindead */
 #define SMP_CALL_FUNCTION	0x2
 /* Octeon - Tell another core to flush its icache */
 #define SMP_ICACHE_FLUSH	0x4
@@ -62,14 +62,14 @@
 #ifdef CONFIG_HOTPLUG_CPU
 static inline int __cpu_disable(void)
 {
-	extern struct plat_smp_ops *mp_ops;     /* private */
+	extern struct plat_smp_ops *mp_ops;	/* private */
 
 	return mp_ops->cpu_disable();
 }
 
 static inline void __cpu_die(unsigned int cpu)
 {
-	extern struct plat_smp_ops *mp_ops;     /* private */
+	extern struct plat_smp_ops *mp_ops;	/* private */
 
 	mp_ops->cpu_die(cpu);
 }
@@ -81,14 +81,14 @@
 
 static inline void arch_send_call_function_single_ipi(int cpu)
 {
-	extern struct plat_smp_ops *mp_ops;     /* private */
+	extern struct plat_smp_ops *mp_ops;	/* private */
 
 	mp_ops->send_ipi_mask(&cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
 }
 
 static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
-	extern struct plat_smp_ops *mp_ops;     /* private */
+	extern struct plat_smp_ops *mp_ops;	/* private */
 
 	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
 }
diff --git a/arch/mips/include/asm/smtc.h b/arch/mips/include/asm/smtc.h
index 8935426..e56b439 100644
--- a/arch/mips/include/asm/smtc.h
+++ b/arch/mips/include/asm/smtc.h
@@ -14,8 +14,8 @@
 
 extern unsigned int smtc_status;
 
-#define SMTC_TLB_SHARED	0x00000001
-#define SMTC_MTC_ACTIVE	0x00000002
+#define SMTC_TLB_SHARED 0x00000001
+#define SMTC_MTC_ACTIVE 0x00000002
 
 /*
  * TLB/ASID Management information
diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h
index 2367b56..66814f8 100644
--- a/arch/mips/include/asm/sn/addrs.h
+++ b/arch/mips/include/asm/sn/addrs.h
@@ -88,8 +88,8 @@
 
 #define SWIN_SIZE_BITS		24
 #define SWIN_SIZE		(UINT64_CAST 1 << 24)
-#define	SWIN_SIZEMASK		(SWIN_SIZE - 1)
-#define	SWIN_WIDGET_MASK	0xF
+#define SWIN_SIZEMASK		(SWIN_SIZE - 1)
+#define SWIN_WIDGET_MASK	0xF
 
 /*
  * Convert smallwindow address to xtalk address.
@@ -97,8 +97,8 @@
  * 'addr' can be physical or virtual address, but will be converted
  * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
  */
-#define	SWIN_WIDGETADDR(addr)	((addr) & SWIN_SIZEMASK)
-#define	SWIN_WIDGETNUM(addr)	(((addr)  >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
+#define SWIN_WIDGETADDR(addr)	((addr) & SWIN_SIZEMASK)
+#define SWIN_WIDGETNUM(addr)	(((addr)  >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
 /*
  * Verify if addr belongs to small window address on node with "nasid"
  *
@@ -108,7 +108,7 @@
  *
  *
  */
-#define	NODE_SWIN_ADDR(nasid, addr)	\
+#define NODE_SWIN_ADDR(nasid, addr)	\
 		(((addr) >= NODE_SWIN_BASE(nasid, 0))  && \
 		 ((addr) <  (NODE_SWIN_BASE(nasid, HUB_NUM_WIDGET) + SWIN_SIZE)\
 		 ))
@@ -150,7 +150,7 @@
 
 #endif
 
-#define	HUB_REGISTER_WIDGET	1
+#define HUB_REGISTER_WIDGET	1
 #define IALIAS_BASE		NODE_SWIN_BASE(0, HUB_REGISTER_WIDGET)
 #define IALIAS_SIZE		0x800000	/* 8 Megabytes */
 #define IS_IALIAS(_a)		(((_a) >= IALIAS_BASE) &&		\
@@ -174,16 +174,16 @@
  *   WARNING: They won't work in assembler.
  *
  *   BDDIR_ENTRY_LO returns the address of the low double-word of the dir
- *                  entry corresponding to a physical (Cac or Uncac) address.
+ *		    entry corresponding to a physical (Cac or Uncac) address.
  *   BDDIR_ENTRY_HI returns the address of the high double-word of the entry.
  *   BDPRT_ENTRY    returns the address of the double-word protection entry
- *                  corresponding to the page containing the physical address.
+ *		    corresponding to the page containing the physical address.
  *   BDPRT_ENTRY_S  Stores the value into the protection entry.
  *   BDPRT_ENTRY_L  Load the value from the protection entry.
  *   BDECC_ENTRY    returns the address of the ECC byte corresponding to a
- *                  double-word at a specified physical address.
+ *		    double-word at a specified physical address.
  *   BDECC_ENTRY_H  returns the address of the two ECC bytes corresponding to a
- *                  quad-word at a specified physical address.
+ *		    quad-word at a specified physical address.
  */
 #define NODE_BDOOR_BASE(_n)	(NODE_HSPEC_BASE(_n) + (NODE_ADDRSPACE_SIZE/2))
 
@@ -226,11 +226,11 @@
 #define BDADDR_IS_DIR(_ba)	((UINT64_CAST  (_ba) & 0x200) != 0)
 #define BDADDR_IS_PRT(_ba)	((UINT64_CAST  (_ba) & 0x200) == 0)
 
-#define BDDIR_TO_MEM(_ba)	(UINT64_CAST (_ba) & NASID_MASK            | \
+#define BDDIR_TO_MEM(_ba)	(UINT64_CAST (_ba) & NASID_MASK		   | \
 				 (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2  | \
 				 (UINT64_CAST(_ba) & 0x1f << 4) << 3)
 
-#define BDPRT_TO_MEM(_ba) 	(UINT64_CAST (_ba) & NASID_MASK	    | \
+#define BDPRT_TO_MEM(_ba)	(UINT64_CAST (_ba) & NASID_MASK	    | \
 				 (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2)
 
 #define BDECC_TO_MEM(_ba)	(UINT64_CAST (_ba) & NASID_MASK	    | \
@@ -251,23 +251,23 @@
 /*
  * WARNING:
  *	When certain Hub chip workaround are defined, it's not sufficient
- *	to dereference the *_HUB_ADDR() macros.  You should instead use
+ *	to dereference the *_HUB_ADDR() macros.	 You should instead use
  *	HUB_L() and HUB_S() if you must deal with pointers to hub registers.
  *	Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
  *	They're always safe.
  */
 #define LOCAL_HUB_ADDR(_x)	(HUBREG_CAST (IALIAS_BASE + (_x)))
-#define REMOTE_HUB_ADDR(_n, _x)	(HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
+#define REMOTE_HUB_ADDR(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
 					      0x800000 + (_x)))
 #ifdef CONFIG_SGI_IP27
-#define REMOTE_HUB_PI_ADDR(_n, _sn, _x)	(HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
+#define REMOTE_HUB_PI_ADDR(_n, _sn, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
 					      0x800000 + (_x)))
 #endif /* CONFIG_SGI_IP27 */
 
 #ifndef __ASSEMBLY__
 
 #define HUB_L(_a)			*(_a)
-#define	HUB_S(_a, _d)			*(_a) = (_d)
+#define HUB_S(_a, _d)			*(_a) = (_d)
 
 #define LOCAL_HUB_L(_r)			HUB_L(LOCAL_HUB_ADDR(_r))
 #define LOCAL_HUB_S(_r, _d)		HUB_S(LOCAL_HUB_ADDR(_r), (_d))
@@ -330,14 +330,14 @@
 
 #define KLI_LAUNCH		0		/* Dir. entries */
 #define KLI_KLCONFIG		1
-#define	KLI_NMI			2
+#define KLI_NMI			2
 #define KLI_GDA			3
 #define KLI_FREEMEM		4
-#define	KLI_SYMMON_STK		5
+#define KLI_SYMMON_STK		5
 #define KLI_PI_ERROR		6
 #define KLI_KERN_VARS		7
-#define	KLI_KERN_XP		8
-#define	KLI_KERN_PARTID		9
+#define KLI_KERN_XP		8
+#define KLI_KERN_PARTID		9
 
 #ifndef __ASSEMBLY__
 
@@ -350,8 +350,8 @@
 #define KLD_SYMMON_STK(nasid)	(KLD_BASE(nasid) + KLI_SYMMON_STK)
 #define KLD_FREEMEM(nasid)	(KLD_BASE(nasid) + KLI_FREEMEM)
 #define KLD_KERN_VARS(nasid)	(KLD_BASE(nasid) + KLI_KERN_VARS)
-#define	KLD_KERN_XP(nasid)	(KLD_BASE(nasid) + KLI_KERN_XP)
-#define	KLD_KERN_PARTID(nasid)	(KLD_BASE(nasid) + KLI_KERN_PARTID)
+#define KLD_KERN_XP(nasid)	(KLD_BASE(nasid) + KLI_KERN_XP)
+#define KLD_KERN_PARTID(nasid)	(KLD_BASE(nasid) + KLI_KERN_PARTID)
 
 #define LAUNCH_OFFSET(nasid, slice)					\
 	(KLD_LAUNCH(nasid)->offset +					\
@@ -365,7 +365,7 @@
 	 KLD_NMI(nasid)->stride * (slice))
 #define NMI_ADDR(nasid, slice)						\
 	TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice))
-#define NMI_SIZE(nasid)	KLD_NMI(nasid)->size
+#define NMI_SIZE(nasid) KLD_NMI(nasid)->size
 
 #define KLCONFIG_OFFSET(nasid)	KLD_KLCONFIG(nasid)->offset
 #define KLCONFIG_ADDR(nasid)						\
@@ -390,8 +390,8 @@
 /* loading symmon 4k below UNIX. the arcs loader needs the topaddr for a
  * relocatable program
  */
-#define	UNIX_DEBUG_LOADADDR	0x300000
-#define	SYMMON_LOADADDR(nasid)						\
+#define UNIX_DEBUG_LOADADDR	0x300000
+#define SYMMON_LOADADDR(nasid)						\
 	TO_NODE(nasid, PHYS_TO_K0(UNIX_DEBUG_LOADADDR - 0x1000))
 
 #define FREEMEM_OFFSET(nasid)	KLD_FREEMEM(nasid)->offset
@@ -420,8 +420,8 @@
 #define KERN_VARS_ADDR(nasid)	KLD_KERN_VARS(nasid)->pointer
 #define KERN_VARS_SIZE(nasid)	KLD_KERN_VARS(nasid)->size
 
-#define	KERN_XP_ADDR(nasid)	KLD_KERN_XP(nasid)->pointer
-#define	KERN_XP_SIZE(nasid)	KLD_KERN_XP(nasid)->size
+#define KERN_XP_ADDR(nasid)	KLD_KERN_XP(nasid)->pointer
+#define KERN_XP_SIZE(nasid)	KLD_KERN_XP(nasid)->size
 
 #define GPDA_ADDR(nasid)	TO_NODE_CAC(nasid, GPDA_OFFSET)
 
diff --git a/arch/mips/include/asm/sn/agent.h b/arch/mips/include/asm/sn/agent.h
index dc81114..e33d092 100644
--- a/arch/mips/include/asm/sn/agent.h
+++ b/arch/mips/include/asm/sn/agent.h
@@ -25,21 +25,21 @@
  */
 
 #if defined(CONFIG_SGI_IP27)
-#define HUB_NIC_ADDR(_cpuid) 						   \
-	REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)),       \
+#define HUB_NIC_ADDR(_cpuid)						   \
+	REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)),	    \
 		MD_MLAN_CTL)
 #endif
 
-#define SET_HUB_NIC(_my_cpuid, _val) 				  	   \
+#define SET_HUB_NIC(_my_cpuid, _val)					   \
 	(HUB_S(HUB_NIC_ADDR(_my_cpuid), (_val)))
 
-#define SET_MY_HUB_NIC(_v) 					           \
+#define SET_MY_HUB_NIC(_v)						   \
 	SET_HUB_NIC(cpuid(), (_v))
 
-#define GET_HUB_NIC(_my_cpuid) 						   \
+#define GET_HUB_NIC(_my_cpuid)						   \
 	(HUB_L(HUB_NIC_ADDR(_my_cpuid)))
 
-#define GET_MY_HUB_NIC() 						   \
+#define GET_MY_HUB_NIC()						   \
 	GET_HUB_NIC(cpuid())
 
 #endif /* _ASM_SGI_SN_AGENT_H */
diff --git a/arch/mips/include/asm/sn/arch.h b/arch/mips/include/asm/sn/arch.h
index bd75945..471e687 100644
--- a/arch/mips/include/asm/sn/arch.h
+++ b/arch/mips/include/asm/sn/arch.h
@@ -28,14 +28,14 @@
 #define INVALID_CNODEID		(cnodeid_t)-1
 #define INVALID_PNODEID		(pnodeid_t)-1
 #define INVALID_MODULE		(moduleid_t)-1
-#define	INVALID_PARTID		(partid_t)-1
+#define INVALID_PARTID		(partid_t)-1
 
 extern nasid_t get_nasid(void);
 extern cnodeid_t get_cpu_cnode(cpuid_t);
 extern int get_cpu_slice(cpuid_t);
 
 /*
- * NO ONE should access these arrays directly.  The only reason we refer to
+ * NO ONE should access these arrays directly.	The only reason we refer to
  * them here is to avoid the procedure call that would be required in the
  * macros below.  (Really want private data members here :-)
  */
@@ -44,12 +44,12 @@
 
 /*
  * These macros are used by various parts of the kernel to convert
- * between the three different kinds of node numbering.   At least some
+ * between the three different kinds of node numbering.	  At least some
  * of them may change to procedure calls in the future, but the macros
  * will continue to work.  Don't use the arrays above directly.
  */
 
-#define	NASID_TO_REGION(nnode)	      	\
+#define NASID_TO_REGION(nnode)		\
     ((nnode) >> \
      (is_fine_dirmode() ? NASID_TO_FINEREG_SHFT : NASID_TO_COARSEREG_SHFT))
 
diff --git a/arch/mips/include/asm/sn/fru.h b/arch/mips/include/asm/sn/fru.h
index b3e3606..bbb8325 100644
--- a/arch/mips/include/asm/sn/fru.h
+++ b/arch/mips/include/asm/sn/fru.h
@@ -21,24 +21,24 @@
 				     * is this necessary ?
 				     */
 	confidence_t km_dimm[MAX_DIMMS];
-	                            /* confidence level that dimm[i] is bad
+				    /* confidence level that dimm[i] is bad
 				     *I think this is the right number
 				     */
 
 } kf_mem_t;
 
 typedef struct kf_cpu_s {
-	confidence_t  	kc_confidence; /* confidence level that cpu is bad */
-	confidence_t  	kc_icache; /* confidence level that instr. cache is bad */
-	confidence_t  	kc_dcache; /* confidence level that data   cache is bad */
-	confidence_t  	kc_scache; /* confidence level that sec.   cache is bad */
+	confidence_t	kc_confidence; /* confidence level that cpu is bad */
+	confidence_t	kc_icache; /* confidence level that instr. cache is bad */
+	confidence_t	kc_dcache; /* confidence level that data   cache is bad */
+	confidence_t	kc_scache; /* confidence level that sec.   cache is bad */
 	confidence_t	kc_sysbus; /* confidence level that sysad/cmd/state bus is bad */
 } kf_cpu_t;
 
 typedef struct kf_pci_bus_s {
 	confidence_t	kpb_belief;	/* confidence level  that the  pci bus is bad */
 	confidence_t	kpb_pcidev_belief[MAX_PCIDEV];
-	                                /* confidence level that the pci dev is bad */
+					/* confidence level that the pci dev is bad */
 } kf_pci_bus_t;
 
 #endif /* __ASM_SN_FRU_H */
diff --git a/arch/mips/include/asm/sn/gda.h b/arch/mips/include/asm/sn/gda.h
index 9cb6ff7..85fa1b5 100644
--- a/arch/mips/include/asm/sn/gda.h
+++ b/arch/mips/include/asm/sn/gda.h
@@ -8,7 +8,7 @@
  * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc.
  *
  * gda.h -- Contains the data structure for the global data area,
- * 	The GDA contains information communicated between the
+ *	The GDA contains information communicated between the
  *	PROM, SYMMON, and the kernel.
  */
 #ifndef _ASM_SN_GDA_H
@@ -23,8 +23,8 @@
  *
  * Version #	| Change
  * -------------+-------------------------------------------------------
- * 	1	| Initial SN0 version
- * 	2	| Prom sets g_partid field to the partition number. 0 IS
+ *	1	| Initial SN0 version
+ *	2	| Prom sets g_partid field to the partition number. 0 IS
  *		| a valid partition #.
  */
 
@@ -60,7 +60,7 @@
 				/* Pointer to a mask of nodes with copies
 				 * of the kernel. */
 	char	g_padding[56];	/* pad out to 128 bytes */
-	nasid_t	g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node,
+	nasid_t g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node,
 						  * indexed by cnodeid.
 						  */
 } gda_t;
@@ -74,7 +74,7 @@
  *		revisions assume GDA is NOT set up, and read partition
  *		information from the board info.
  */
-#define	PART_GDA_VERSION	2
+#define PART_GDA_VERSION	2
 
 /*
  * The following requests can be sent to the PROM during startup.
@@ -83,17 +83,17 @@
 #define PROMOP_MAGIC		0x0ead0000
 #define PROMOP_MAGIC_MASK	0x0fff0000
 
-#define PROMOP_BIST_SHIFT       11
-#define PROMOP_BIST_MASK        (0x3 << 11)
+#define PROMOP_BIST_SHIFT	11
+#define PROMOP_BIST_MASK	(0x3 << 11)
 
 #define PROMOP_REG		PI_ERR_STACK_ADDR_A
 
 #define PROMOP_INVALID		(PROMOP_MAGIC | 0x00)
-#define PROMOP_HALT             (PROMOP_MAGIC | 0x10)
-#define PROMOP_POWERDOWN        (PROMOP_MAGIC | 0x20)
-#define PROMOP_RESTART          (PROMOP_MAGIC | 0x30)
-#define PROMOP_REBOOT           (PROMOP_MAGIC | 0x40)
-#define PROMOP_IMODE            (PROMOP_MAGIC | 0x50)
+#define PROMOP_HALT		(PROMOP_MAGIC | 0x10)
+#define PROMOP_POWERDOWN	(PROMOP_MAGIC | 0x20)
+#define PROMOP_RESTART		(PROMOP_MAGIC | 0x30)
+#define PROMOP_REBOOT		(PROMOP_MAGIC | 0x40)
+#define PROMOP_IMODE		(PROMOP_MAGIC | 0x50)
 
 #define PROMOP_CMD_MASK		0x00f0
 #define PROMOP_OPTIONS_MASK	0xfff0
diff --git a/arch/mips/include/asm/sn/intr.h b/arch/mips/include/asm/sn/intr.h
index 6718b64..fc13481 100644
--- a/arch/mips/include/asm/sn/intr.h
+++ b/arch/mips/include/asm/sn/intr.h
@@ -14,8 +14,8 @@
 #define INT_PEND0_BASELVL	0
 #define INT_PEND1_BASELVL	64
 
-#define	N_INTPENDJUNK_BITS	8
-#define	INTPENDJUNK_CLRBIT	0x80
+#define N_INTPENDJUNK_BITS	8
+#define INTPENDJUNK_CLRBIT	0x80
 
 /*
  * Macros to manipulate the interrupt register on the calling hub chip.
@@ -32,7 +32,7 @@
  * We do an uncached load of the int_pend0 register to ensure this.
  */
 
-#define LOCAL_HUB_CLR_INTR(level)	  			\
+#define LOCAL_HUB_CLR_INTR(level)				\
 do {								\
 	LOCAL_HUB_S(PI_INT_PEND_MOD, (level));			\
 	LOCAL_HUB_L(PI_INT_PEND0);				\
@@ -40,7 +40,7 @@
 
 #define REMOTE_HUB_CLR_INTR(hub, level)				\
 do {								\
-	nasid_t  __hub = (hub);					\
+	nasid_t	 __hub = (hub);					\
 								\
 	REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level));		\
 	REMOTE_HUB_L(__hub, PI_INT_PEND0);			\
@@ -102,8 +102,8 @@
 #define LLP_PFAIL_INTR_A	41	/* see ml/SN/SN0/sysctlr.c */
 #define LLP_PFAIL_INTR_B	42
 
-#define	TLB_INTR_A		43	/* used for tlb flush random */
-#define	TLB_INTR_B		44
+#define TLB_INTR_A		43	/* used for tlb flush random */
+#define TLB_INTR_B		44
 
 #define IP27_INTR_0		45	/* Reserved for PROM use */
 #define IP27_INTR_1		46	/* do not use in Kernel */
@@ -116,8 +116,8 @@
 
 #define BRIDGE_ERROR_INTR	53	/* Setup by PROM to catch	*/
 					/* Bridge Errors */
-#define	DEBUG_INTR_A		54
-#define	DEBUG_INTR_B		55	/* Used by symmon to stop all cpus */
+#define DEBUG_INTR_A		54
+#define DEBUG_INTR_B		55	/* Used by symmon to stop all cpus */
 #define IO_ERROR_INTR		57	/* Setup by PROM */
 #define CLK_ERR_INTR		58
 #define COR_ERR_INTR_A		59
diff --git a/arch/mips/include/asm/sn/io.h b/arch/mips/include/asm/sn/io.h
index 24c6775..d5174d0 100644
--- a/arch/mips/include/asm/sn/io.h
+++ b/arch/mips/include/asm/sn/io.h
@@ -31,7 +31,7 @@
 #define HUB_PIO_MAP_TO_MEM	0
 #define HUB_PIO_MAP_TO_IO	1
 
-#define IIO_ITTE_INVALID_WIDGET	3	/* an invalid widget  */
+#define IIO_ITTE_INVALID_WIDGET 3	/* an invalid widget  */
 
 #define IIO_ITTE_PUT(nasid, bigwin, io_or_mem, widget, addr) \
 	REMOTE_HUB_S((nasid), IIO_ITTE(bigwin), \
@@ -52,7 +52,7 @@
  * value _x is expected to be a widget number in the range
  * 0, 8 - 0xF
  */
-#define	IIO_IOPRB(_x)	(IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
+#define IIO_IOPRB(_x)	(IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
 			(_x) : \
 			(_x) - (HUB_WIDGET_ID_MIN-1)) << 3) )
 
diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h
index 0996777..e33f036 100644
--- a/arch/mips/include/asm/sn/ioc3.h
+++ b/arch/mips/include/asm/sn/ioc3.h
@@ -62,8 +62,8 @@
 
 	volatile u8		fill3[0x170 - 0x169 - 1];
 
-	struct ioc3_uartregs    uartb;	/* 0x20170  */
-	struct ioc3_uartregs    uarta;	/* 0x20178  */
+	struct ioc3_uartregs	uartb;	/* 0x20170  */
+	struct ioc3_uartregs	uarta;	/* 0x20178  */
 };
 
 /* Register layout of IOC3 in configuration space.  */
@@ -106,7 +106,7 @@
 	volatile u32	ppbr_l_b;	/* 0x00094  */
 	volatile u32	ppcr_b;		/* 0x00098  */
 
-	/* Keyboard and Mouse Registers  */
+	/* Keyboard and Mouse Registers	 */
 	volatile u32	km_csr;		/* 0x0009c  */
 	volatile u32	k_rd;		/* 0x000a0  */
 	volatile u32	m_rd;		/* 0x000a4  */
@@ -208,7 +208,7 @@
 /*
  * Ethernet TX Descriptor
  */
-#define ETXD_DATALEN    104
+#define ETXD_DATALEN	104
 struct ioc3_etxd {
 	u32	cmd;				/* command field */
 	u32	bufcnt;				/* buffer counts field */
diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h
index fe02900..467c313 100644
--- a/arch/mips/include/asm/sn/klconfig.h
+++ b/arch/mips/include/asm/sn/klconfig.h
@@ -8,8 +8,8 @@
  * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
  * Copyright (C) 1999, 2000 by Ralf Baechle
  */
-#ifndef	_ASM_SN_KLCONFIG_H
-#define	_ASM_SN_KLCONFIG_H
+#ifndef _ASM_SN_KLCONFIG_H
+#define _ASM_SN_KLCONFIG_H
 
 /*
  * The KLCONFIG structures store info about the various BOARDs found
@@ -20,11 +20,11 @@
 /*
  * WARNING:
  *	Certain assembly language routines (notably xxxxx.s) in the IP27PROM
- *	will depend on the format of the data structures in this file.  In
- *      most cases, rearranging the fields can seriously break things.
- *      Adding fields in the beginning or middle can also break things.
- *      Add fields if necessary, to the end of a struct in such a way
- *      that offsets of existing fields do not change.
+ *	will depend on the format of the data structures in this file.	In
+ *	most cases, rearranging the fields can seriously break things.
+ *	Adding fields in the beginning or middle can also break things.
+ *	Add fields if necessary, to the end of a struct in such a way
+ *	that offsets of existing fields do not change.
  */
 
 #include <linux/types.h>
@@ -35,7 +35,7 @@
 #include <asm/sn/sn0/addrs.h>
 //#include <sys/SN/router.h>
 // XXX Stolen from <sys/SN/router.h>:
-#define MAX_ROUTER_PORTS (6)    /* Max. number of ports on a router */
+#define MAX_ROUTER_PORTS (6)	/* Max. number of ports on a router */
 #include <asm/sn/fru.h>
 //#include <sys/graph.h>
 //#include <sys/xtalk/xbow.h>
@@ -63,14 +63,14 @@
 
 typedef u64  nic_t;
 
-#define KLCFGINFO_MAGIC	0xbeedbabe
+#define KLCFGINFO_MAGIC 0xbeedbabe
 
 typedef s32 klconf_off_t;
 
 /*
  * Some IMPORTANT OFFSETS. These are the offsets on all NODES.
  */
-#define	MAX_MODULE_ID		255
+#define MAX_MODULE_ID		255
 #define SIZE_PAD		4096 /* 4k padding for structures */
 /*
  * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets,
@@ -86,25 +86,25 @@
 /* All bits in this field are currently used. Try the pad fields if
    you need more flag bits */
 
-#define ENABLE_BOARD 		0x01
-#define FAILED_BOARD  		0x02
-#define DUPLICATE_BOARD 	0x04    /* Boards like midplanes/routers which
+#define ENABLE_BOARD		0x01
+#define FAILED_BOARD		0x02
+#define DUPLICATE_BOARD		0x04	/* Boards like midplanes/routers which
 					   are discovered twice. Use one of them */
 #define VISITED_BOARD		0x08	/* Used for compact hub numbering. */
-#define LOCAL_MASTER_IO6	0x10 	/* master io6 for that node */
+#define LOCAL_MASTER_IO6	0x10	/* master io6 for that node */
 #define GLOBAL_MASTER_IO6	0x20
-#define THIRD_NIC_PRESENT 	0x40  	/* for future use */
-#define SECOND_NIC_PRESENT 	0x80 	/* addons like MIO are present */
+#define THIRD_NIC_PRESENT	0x40	/* for future use */
+#define SECOND_NIC_PRESENT	0x80	/* addons like MIO are present */
 
 /* klinfo->flags fields */
 
-#define KLINFO_ENABLE 		0x01    /* This component is enabled */
-#define KLINFO_FAILED   	0x02 	/* This component failed */
-#define KLINFO_DEVICE   	0x04 	/* This component is a device */
-#define KLINFO_VISITED  	0x08 	/* This component has been visited */
-#define KLINFO_CONTROLLER   	0x10 	/* This component is a device controller */
-#define KLINFO_INSTALL   	0x20  	/* Install a driver */
-#define	KLINFO_HEADLESS		0x40	/* Headless (or hubless) component */
+#define KLINFO_ENABLE		0x01	/* This component is enabled */
+#define KLINFO_FAILED		0x02	/* This component failed */
+#define KLINFO_DEVICE		0x04	/* This component is a device */
+#define KLINFO_VISITED		0x08	/* This component has been visited */
+#define KLINFO_CONTROLLER	0x10	/* This component is a device controller */
+#define KLINFO_INSTALL		0x20	/* Install a driver */
+#define KLINFO_HEADLESS		0x40	/* Headless (or hubless) component */
 #define IS_CONSOLE_IOC3(i)	((((klinfo_t *)i)->flags) & KLINFO_INSTALL)
 
 #define GB2		0x80000000
@@ -116,30 +116,30 @@
    is used in the code to allocate various areas.
 */
 
-#define BOARD_STRUCT 		0
-#define COMPONENT_STRUCT 	1
-#define ERRINFO_STRUCT 		2
-#define KLMALLOC_TYPE_MAX 	(ERRINFO_STRUCT + 1)
-#define DEVICE_STRUCT 		3
+#define BOARD_STRUCT		0
+#define COMPONENT_STRUCT	1
+#define ERRINFO_STRUCT		2
+#define KLMALLOC_TYPE_MAX	(ERRINFO_STRUCT + 1)
+#define DEVICE_STRUCT		3
 
 
 typedef struct console_s {
-	unsigned long 	uart_base;
-	unsigned long 	config_base;
-	unsigned long 	memory_base;
+	unsigned long	uart_base;
+	unsigned long	config_base;
+	unsigned long	memory_base;
 	short		baud;
 	short		flag;
 	int		type;
 	nasid_t		nasid;
 	char		wid;
-	char 		npci;
+	char		npci;
 	nic_t		baseio_nic;
 } console_t;
 
 typedef struct klc_malloc_hdr {
-        klconf_off_t km_base;
-        klconf_off_t km_limit;
-        klconf_off_t km_current;
+	klconf_off_t km_base;
+	klconf_off_t km_limit;
+	klconf_off_t km_current;
 } klc_malloc_hdr_t;
 
 /* Functions/macros needed to use this structure */
@@ -148,7 +148,7 @@
 	u64		ch_magic;	/* set this to KLCFGINFO_MAGIC */
 	u32		ch_version;    /* structure version number */
 	klconf_off_t	ch_malloc_hdr_off; /* offset of ch_malloc_hdr */
-	klconf_off_t	ch_cons_off;       /* offset of ch_cons */
+	klconf_off_t	ch_cons_off;	   /* offset of ch_cons */
 	klconf_off_t	ch_board_info;	/* the link list of boards */
 	console_t	ch_cons_info;	/* address info of the console */
 	klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX];
@@ -157,27 +157,27 @@
 } kl_config_hdr_t;
 
 
-#define KL_CONFIG_HDR(_nasid) 	((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid)))
+#define KL_CONFIG_HDR(_nasid)	((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid)))
 #define KL_CONFIG_INFO_OFFSET(_nasid)					\
-        (KL_CONFIG_HDR(_nasid)->ch_board_info)
+	(KL_CONFIG_HDR(_nasid)->ch_board_info)
 #define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off)				\
-        (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off))
+	(KL_CONFIG_HDR(_nasid)->ch_board_info = (_off))
 
-#define KL_CONFIG_INFO(_nasid) 						\
-        (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ?		\
+#define KL_CONFIG_INFO(_nasid)						\
+	(lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ?		\
 	 NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \
 	 0)
 #define KL_CONFIG_MAGIC(_nasid)		(KL_CONFIG_HDR(_nasid)->ch_magic)
 
 #define KL_CONFIG_CHECK_MAGIC(_nasid)					\
-        (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC)
+	(KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC)
 
 #define KL_CONFIG_HDR_INIT_MAGIC(_nasid)	\
-                  (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC)
+		  (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC)
 
 /* --- New Macros for the changed kl_config_hdr_t structure --- */
 
-#define PTR_CH_MALLOC_HDR(_k)   ((klc_malloc_hdr_t *)\
+#define PTR_CH_MALLOC_HDR(_k)	((klc_malloc_hdr_t *)\
 			((unsigned long)_k + (_k->ch_malloc_hdr_off)))
 
 #define KL_CONFIG_CH_MALLOC_HDR(_n)   PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n))
@@ -190,29 +190,29 @@
 /* ------------------------------------------------------------- */
 
 #define KL_CONFIG_INFO_START(_nasid)	\
-        (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t))
+	(klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t))
 
 #define KL_CONFIG_BOARD_NASID(_brd)	((_brd)->brd_nasid)
 #define KL_CONFIG_BOARD_SET_NEXT(_brd, _off)	((_brd)->brd_next = (_off))
 
-#define KL_CONFIG_DUPLICATE_BOARD(_brd)	((_brd)->brd_flags & DUPLICATE_BOARD)
+#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD)
 
-#define XBOW_PORT_TYPE_HUB(_xbowp, _link) 	\
-               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB)
-#define XBOW_PORT_TYPE_IO(_xbowp, _link) 	\
-               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO)
+#define XBOW_PORT_TYPE_HUB(_xbowp, _link)	\
+	       ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB)
+#define XBOW_PORT_TYPE_IO(_xbowp, _link)	\
+	       ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO)
 
-#define XBOW_PORT_IS_ENABLED(_xbowp, _link) 	\
-               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE)
-#define XBOW_PORT_NASID(_xbowp, _link) 	\
-               ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid)
+#define XBOW_PORT_IS_ENABLED(_xbowp, _link)	\
+	       ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE)
+#define XBOW_PORT_NASID(_xbowp, _link)	\
+	       ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid)
 
-#define XBOW_PORT_IO     0x1
-#define XBOW_PORT_HUB    0x2
+#define XBOW_PORT_IO	 0x1
+#define XBOW_PORT_HUB	 0x2
 #define XBOW_PORT_ENABLE 0x4
 
-#define	SN0_PORT_FENCE_SHFT	0
-#define	SN0_PORT_FENCE_MASK	(1 << SN0_PORT_FENCE_SHFT)
+#define SN0_PORT_FENCE_SHFT	0
+#define SN0_PORT_FENCE_MASK	(1 << SN0_PORT_FENCE_SHFT)
 
 /*
  * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
@@ -242,28 +242,28 @@
  *
  KLCONFIG
 
- +------------+      +------------+      +------------+      +------------+
- |  lboard    |  +-->|   lboard   |  +-->|   rboard   |  +-->|   lboard   |
- +------------+  |   +------------+  |   +------------+  |   +------------+
- | board info |  |   | board info |  |   |errinfo,bptr|  |   | board info |
- +------------+  |   +------------+  |   +------------+  |   +------------+
- | offset     |--+   |  offset    |--+   |  offset    |--+   |offset=NULL |
- +------------+      +------------+      +------------+      +------------+
+ +------------+	     +------------+	 +------------+	     +------------+
+ |  lboard    |	 +-->|	 lboard	  |  +-->|   rboard   |	 +-->|	 lboard	  |
+ +------------+	 |   +------------+  |	 +------------+	 |   +------------+
+ | board info |	 |   | board info |  |	 |errinfo,bptr|	 |   | board info |
+ +------------+	 |   +------------+  |	 +------------+	 |   +------------+
+ | offset     |--+   |	offset	  |--+	 |  offset    |--+   |offset=NULL |
+ +------------+	     +------------+	 +------------+	     +------------+
 
 
  +------------+
  | board info |
- +------------+       +--------------------------------+
+ +------------+	      +--------------------------------+
  | compt 1    |------>| type, rev, diaginfo, size ...  |  (CPU)
- +------------+       +--------------------------------+
+ +------------+	      +--------------------------------+
  | compt 2    |--+
- +------------+  |    +--------------------------------+
- |  ...       |  +--->| type, rev, diaginfo, size ...  |  (MEM_BANK)
- +------------+       +--------------------------------+
+ +------------+	 |    +--------------------------------+
+ |  ...	      |	 +--->| type, rev, diaginfo, size ...  |  (MEM_BANK)
+ +------------+	      +--------------------------------+
  | errinfo    |--+
- +------------+  |    +--------------------------------+
-                 +--->|r/l brd errinfo,compt err flags |
-                      +--------------------------------+
+ +------------+	 |    +--------------------------------+
+		 +--->|r/l brd errinfo,compt err flags |
+		      +--------------------------------+
 
  *
  * Each BOARD consists of COMPONENTs and the BOARD structure has
@@ -311,7 +311,7 @@
  */
 #define KL_CPU_R4000		0x1	/* Standard R4000 */
 #define KL_CPU_TFP		0x2	/* TFP processor */
-#define	KL_CPU_R10000		0x3	/* R10000 (T5) */
+#define KL_CPU_R10000		0x3	/* R10000 (T5) */
 #define KL_CPU_NONE		(-1)	/* no cpu present in slot */
 
 /*
@@ -320,13 +320,13 @@
 
 #define KLCLASS_MASK	0xf0
 #define KLCLASS_NONE	0x00
-#define KLCLASS_NODE	0x10             /* CPU, Memory and HUB board */
+#define KLCLASS_NODE	0x10		 /* CPU, Memory and HUB board */
 #define KLCLASS_CPU	KLCLASS_NODE
-#define KLCLASS_IO	0x20             /* BaseIO, 4 ch SCSI, ethernet, FDDI
+#define KLCLASS_IO	0x20		 /* BaseIO, 4 ch SCSI, ethernet, FDDI
 					    and the non-graphics widget boards */
-#define KLCLASS_ROUTER	0x30             /* Router board */
-#define KLCLASS_MIDPLANE 0x40            /* We need to treat this as a board
-                                            so that we can record error info */
+#define KLCLASS_ROUTER	0x30		 /* Router board */
+#define KLCLASS_MIDPLANE 0x40		 /* We need to treat this as a board
+					    so that we can record error info */
 #define KLCLASS_GFX	0x50		/* graphics boards */
 
 #define KLCLASS_PSEUDO_GFX	0x60	/* HDTV type cards that use a gfx
@@ -336,7 +336,7 @@
 #define KLCLASS_MAX	7		/* Bump this if a new CLASS is added */
 #define KLTYPE_MAX	10		/* Bump this if a new CLASS is added */
 
-#define KLCLASS_UNKNOWN	0xf0
+#define KLCLASS_UNKNOWN 0xf0
 
 #define KLCLASS(_x) ((_x) & KLCLASS_MASK)
 
@@ -353,36 +353,36 @@
 
 #define KLTYPE_WEIRDIO	(KLCLASS_IO  | 0x0)
 #define KLTYPE_BASEIO	(KLCLASS_IO  | 0x1) /* IOC3, SuperIO, Bridge, SCSI */
-#define KLTYPE_IO6	KLTYPE_BASEIO       /* Additional name */
+#define KLTYPE_IO6	KLTYPE_BASEIO	    /* Additional name */
 #define KLTYPE_4CHSCSI	(KLCLASS_IO  | 0x2)
-#define KLTYPE_MSCSI	KLTYPE_4CHSCSI      /* Additional name */
-#define KLTYPE_ETHERNET	(KLCLASS_IO  | 0x3)
-#define KLTYPE_MENET	KLTYPE_ETHERNET     /* Additional name */
-#define KLTYPE_FDDI  	(KLCLASS_IO  | 0x4)
+#define KLTYPE_MSCSI	KLTYPE_4CHSCSI	    /* Additional name */
+#define KLTYPE_ETHERNET (KLCLASS_IO  | 0x3)
+#define KLTYPE_MENET	KLTYPE_ETHERNET	    /* Additional name */
+#define KLTYPE_FDDI	(KLCLASS_IO  | 0x4)
 #define KLTYPE_UNUSED	(KLCLASS_IO  | 0x5) /* XXX UNUSED */
-#define KLTYPE_HAROLD   (KLCLASS_IO  | 0x6) /* PCI SHOE BOX */
+#define KLTYPE_HAROLD	(KLCLASS_IO  | 0x6) /* PCI SHOE BOX */
 #define KLTYPE_PCI	KLTYPE_HAROLD
-#define KLTYPE_VME      (KLCLASS_IO  | 0x7) /* Any 3rd party VME card */
-#define KLTYPE_MIO   	(KLCLASS_IO  | 0x8)
-#define KLTYPE_FC    	(KLCLASS_IO  | 0x9)
-#define KLTYPE_LINC    	(KLCLASS_IO  | 0xA)
-#define KLTYPE_TPU    	(KLCLASS_IO  | 0xB) /* Tensor Processing Unit */
-#define KLTYPE_GSN_A   	(KLCLASS_IO  | 0xC) /* Main GSN board */
-#define KLTYPE_GSN_B   	(KLCLASS_IO  | 0xD) /* Auxiliary GSN board */
+#define KLTYPE_VME	(KLCLASS_IO  | 0x7) /* Any 3rd party VME card */
+#define KLTYPE_MIO	(KLCLASS_IO  | 0x8)
+#define KLTYPE_FC	(KLCLASS_IO  | 0x9)
+#define KLTYPE_LINC	(KLCLASS_IO  | 0xA)
+#define KLTYPE_TPU	(KLCLASS_IO  | 0xB) /* Tensor Processing Unit */
+#define KLTYPE_GSN_A	(KLCLASS_IO  | 0xC) /* Main GSN board */
+#define KLTYPE_GSN_B	(KLCLASS_IO  | 0xD) /* Auxiliary GSN board */
 
 #define KLTYPE_GFX	(KLCLASS_GFX | 0x0) /* unknown graphics type */
 #define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */
 #define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */
 
 #define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0)
-#define KLTYPE_ROUTER     (KLCLASS_ROUTER | 0x1)
-#define KLTYPE_ROUTER2    KLTYPE_ROUTER		/* Obsolete! */
+#define KLTYPE_ROUTER	  (KLCLASS_ROUTER | 0x1)
+#define KLTYPE_ROUTER2	  KLTYPE_ROUTER		/* Obsolete! */
 #define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2)
 #define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
 
 #define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0)
 #define KLTYPE_MIDPLANE8  (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */
-#define KLTYPE_MIDPLANE    KLTYPE_MIDPLANE8
+#define KLTYPE_MIDPLANE	   KLTYPE_MIDPLANE8
 #define KLTYPE_PBRICK_XBOW	(KLCLASS_MIDPLANE | 0x2)
 
 #define KLTYPE_IOBRICK		(KLCLASS_IOBRICK | 0x0)
@@ -398,11 +398,11 @@
  * When bringup started nic names had not standardized and so we
  * had to hard code. (For people interested in history.)
  */
-#define KLTYPE_XTHD   	(KLCLASS_PSEUDO_GFX | 0x9)
+#define KLTYPE_XTHD	(KLCLASS_PSEUDO_GFX | 0x9)
 
 #define KLTYPE_UNKNOWN	(KLCLASS_UNKNOWN | 0xf)
 
-#define KLTYPE(_x) 	((_x) & KLTYPE_MASK)
+#define KLTYPE(_x)	((_x) & KLTYPE_MASK)
 #define IS_MIO_PRESENT(l)	((l->brd_type == KLTYPE_BASEIO) && \
 				 (l->brd_flags & SECOND_NIC_PRESENT))
 #define IS_MIO_IOC3(l, n)	(IS_MIO_PRESENT(l) && (n > 2))
@@ -416,33 +416,33 @@
 #define LOCAL_BOARD 1
 #define REMOTE_BOARD 2
 
-#define LBOARD_STRUCT_VERSION 	2
+#define LBOARD_STRUCT_VERSION	2
 
 typedef struct lboard_s {
-	klconf_off_t 	brd_next;         /* Next BOARD */
-	unsigned char 	struct_type;      /* type of structure, local or remote */
-	unsigned char 	brd_type;         /* type+class */
-	unsigned char 	brd_sversion;     /* version of this structure */
-        unsigned char 	brd_brevision;    /* board revision */
-        unsigned char 	brd_promver;      /* board prom version, if any */
-	unsigned char 	brd_flags;        /* Enabled, Disabled etc */
-	unsigned char 	brd_slot;         /* slot number */
-	unsigned short	brd_debugsw;      /* Debug switches */
-	moduleid_t	brd_module;       /* module to which it belongs */
-	partid_t 	brd_partition;    /* Partition number */
-        unsigned short 	brd_diagval;      /* diagnostic value */
-        unsigned short 	brd_diagparm;     /* diagnostic parameter */
-        unsigned char 	brd_inventory;    /* inventory history */
-        unsigned char 	brd_numcompts;    /* Number of components */
-        nic_t         	brd_nic;          /* Number in CAN */
-	nasid_t		brd_nasid;        /* passed parameter */
-	klconf_off_t 	brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
-	klconf_off_t 	brd_errinfo;      /* Board's error information */
+	klconf_off_t	brd_next;	  /* Next BOARD */
+	unsigned char	struct_type;	  /* type of structure, local or remote */
+	unsigned char	brd_type;	  /* type+class */
+	unsigned char	brd_sversion;	  /* version of this structure */
+	unsigned char	brd_brevision;	  /* board revision */
+	unsigned char	brd_promver;	  /* board prom version, if any */
+	unsigned char	brd_flags;	  /* Enabled, Disabled etc */
+	unsigned char	brd_slot;	  /* slot number */
+	unsigned short	brd_debugsw;	  /* Debug switches */
+	moduleid_t	brd_module;	  /* module to which it belongs */
+	partid_t	brd_partition;	  /* Partition number */
+	unsigned short	brd_diagval;	  /* diagnostic value */
+	unsigned short	brd_diagparm;	  /* diagnostic parameter */
+	unsigned char	brd_inventory;	  /* inventory history */
+	unsigned char	brd_numcompts;	  /* Number of components */
+	nic_t		brd_nic;	  /* Number in CAN */
+	nasid_t		brd_nasid;	  /* passed parameter */
+	klconf_off_t	brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
+	klconf_off_t	brd_errinfo;	  /* Board's error information */
 	struct lboard_s *brd_parent;	  /* Logical parent for this brd */
-	vertex_hdl_t	brd_graph_link;   /* vertex hdl to connect extern compts */
+	vertex_hdl_t	brd_graph_link;	  /* vertex hdl to connect extern compts */
 	confidence_t	brd_confidence;	  /* confidence that the board is bad */
-	nasid_t		brd_owner;        /* who owns this board */
-	unsigned char 	brd_nic_flags;    /* To handle 8 more NICs */
+	nasid_t		brd_owner;	  /* who owns this board */
+	unsigned char	brd_nic_flags;	  /* To handle 8 more NICs */
 	char		brd_name[32];
 } lboard_t;
 
@@ -456,23 +456,23 @@
 
 #define KLCF_CLASS(_brd)	KLCLASS((_brd)->brd_type)
 #define KLCF_TYPE(_brd)		KLTYPE((_brd)->brd_type)
-#define KLCF_REMOTE(_brd)  	(((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1)
+#define KLCF_REMOTE(_brd)	(((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1)
 #define KLCF_NUM_COMPS(_brd)	((_brd)->brd_numcompts)
 #define KLCF_MODULE_ID(_brd)	((_brd)->brd_module)
 
-#define KLCF_NEXT(_brd) 	\
-        ((_brd)->brd_next ? 	\
+#define KLCF_NEXT(_brd)		\
+	((_brd)->brd_next ?	\
 	 (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\
 	 NULL)
-#define KLCF_COMP(_brd, _ndx)   \
-                (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd),	\
+#define KLCF_COMP(_brd, _ndx)	\
+		(klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \
 					       (_brd)->brd_compts[(_ndx)]))
 
 #define KLCF_COMP_ERROR(_brd, _comp)	\
-               (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo))
+	       (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo))
 
 #define KLCF_COMP_TYPE(_comp)	((_comp)->struct_type)
-#define KLCF_BRIDGE_W_ID(_comp)	((_comp)->physid)	/* Widget ID */
+#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid)	/* Widget ID */
 
 
 
@@ -481,73 +481,73 @@
  * component.
  */
 
-typedef struct klinfo_s {                  /* Generic info */
-        unsigned char   struct_type;       /* type of this structure */
-        unsigned char   struct_version;    /* version of this structure */
-        unsigned char   flags;            /* Enabled, disabled etc */
-        unsigned char   revision;         /* component revision */
-        unsigned short  diagval;          /* result of diagnostics */
-        unsigned short  diagparm;         /* diagnostic parameter */
-        unsigned char   inventory;        /* previous inventory status */
-	nic_t 		nic;              /* MUst be aligned properly */
-        unsigned char   physid;           /* physical id of component */
-        unsigned int    virtid;           /* virtual id as seen by system */
-	unsigned char	widid;	          /* Widget id - if applicable */
-	nasid_t		nasid;            /* node number - from parent */
+typedef struct klinfo_s {		   /* Generic info */
+	unsigned char	struct_type;	   /* type of this structure */
+	unsigned char	struct_version;	   /* version of this structure */
+	unsigned char	flags;		  /* Enabled, disabled etc */
+	unsigned char	revision;	  /* component revision */
+	unsigned short	diagval;	  /* result of diagnostics */
+	unsigned short	diagparm;	  /* diagnostic parameter */
+	unsigned char	inventory;	  /* previous inventory status */
+	nic_t		nic;		  /* MUst be aligned properly */
+	unsigned char	physid;		  /* physical id of component */
+	unsigned int	virtid;		  /* virtual id as seen by system */
+	unsigned char	widid;		  /* Widget id - if applicable */
+	nasid_t		nasid;		  /* node number - from parent */
 	char		pad1;		  /* pad out structure. */
 	char		pad2;		  /* pad out structure. */
-	COMPONENT	*arcs_compt;      /* ptr to the arcs struct for ease*/
-        klconf_off_t	errinfo;          /* component specific errors */
-        unsigned short  pad3;             /* pci fields have moved over to */
-        unsigned short  pad4;             /* klbri_t */
+	COMPONENT	*arcs_compt;	  /* ptr to the arcs struct for ease*/
+	klconf_off_t	errinfo;	  /* component specific errors */
+	unsigned short	pad3;		  /* pci fields have moved over to */
+	unsigned short	pad4;		  /* klbri_t */
 } klinfo_t ;
 
 #define KLCONFIG_INFO_ENABLED(_i)	((_i)->flags & KLINFO_ENABLE)
 /*
  * Component structures.
  * Following are the currently identified components:
- * 	CPU, HUB, MEM_BANK,
- * 	XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE)
- * 	BRIDGE, IOC3, SuperIO, SCSI, FDDI
- * 	ROUTER
- * 	GRAPHICS
+ *	CPU, HUB, MEM_BANK,
+ *	XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE)
+ *	BRIDGE, IOC3, SuperIO, SCSI, FDDI
+ *	ROUTER
+ *	GRAPHICS
  */
 #define KLSTRUCT_UNKNOWN	0
-#define KLSTRUCT_CPU  		1
-#define KLSTRUCT_HUB  		2
-#define KLSTRUCT_MEMBNK 	3
-#define KLSTRUCT_XBOW 		4
-#define KLSTRUCT_BRI 		5
-#define KLSTRUCT_IOC3 		6
-#define KLSTRUCT_PCI 		7
-#define KLSTRUCT_VME 		8
+#define KLSTRUCT_CPU		1
+#define KLSTRUCT_HUB		2
+#define KLSTRUCT_MEMBNK		3
+#define KLSTRUCT_XBOW		4
+#define KLSTRUCT_BRI		5
+#define KLSTRUCT_IOC3		6
+#define KLSTRUCT_PCI		7
+#define KLSTRUCT_VME		8
 #define KLSTRUCT_ROU		9
-#define KLSTRUCT_GFX 		10
-#define KLSTRUCT_SCSI 		11
-#define KLSTRUCT_FDDI 		12
-#define KLSTRUCT_MIO 		13
-#define KLSTRUCT_DISK 		14
-#define KLSTRUCT_TAPE 		15
-#define KLSTRUCT_CDROM 		16
-#define KLSTRUCT_HUB_UART 	17
-#define KLSTRUCT_IOC3ENET 	18
-#define KLSTRUCT_IOC3UART 	19
+#define KLSTRUCT_GFX		10
+#define KLSTRUCT_SCSI		11
+#define KLSTRUCT_FDDI		12
+#define KLSTRUCT_MIO		13
+#define KLSTRUCT_DISK		14
+#define KLSTRUCT_TAPE		15
+#define KLSTRUCT_CDROM		16
+#define KLSTRUCT_HUB_UART	17
+#define KLSTRUCT_IOC3ENET	18
+#define KLSTRUCT_IOC3UART	19
 #define KLSTRUCT_UNUSED		20 /* XXX UNUSED */
-#define KLSTRUCT_IOC3PCKM       21
-#define KLSTRUCT_RAD        	22
-#define KLSTRUCT_HUB_TTY        23
-#define KLSTRUCT_IOC3_TTY 	24
+#define KLSTRUCT_IOC3PCKM	21
+#define KLSTRUCT_RAD		22
+#define KLSTRUCT_HUB_TTY	23
+#define KLSTRUCT_IOC3_TTY	24
 
 /* Early Access IO proms are compatible
    only with KLSTRUCT values up to 24. */
 
-#define KLSTRUCT_FIBERCHANNEL 	25
+#define KLSTRUCT_FIBERCHANNEL	25
 #define KLSTRUCT_MOD_SERIAL_NUM 26
-#define KLSTRUCT_IOC3MS         27
-#define KLSTRUCT_TPU            28
-#define KLSTRUCT_GSN_A          29
-#define KLSTRUCT_GSN_B          30
-#define KLSTRUCT_XTHD           31
+#define KLSTRUCT_IOC3MS		27
+#define KLSTRUCT_TPU		28
+#define KLSTRUCT_GSN_A		29
+#define KLSTRUCT_GSN_B		30
+#define KLSTRUCT_XTHD		31
 
 /*
  * These are the indices of various components within a lboard structure.
@@ -583,7 +583,7 @@
  * The port info in ip27_cfg area translates to a lboart_t in the
  * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t
  * is stored in terms of a nasid and a offset from start of KLCONFIG
- * area  on that nasid.
+ * area	 on that nasid.
  */
 typedef struct klport_s {
 	nasid_t		port_nasid;
@@ -591,20 +591,20 @@
 	klconf_off_t	port_offset;
 } klport_t;
 
-typedef struct klcpu_s {                          /* CPU */
-	klinfo_t 	cpu_info;
-	unsigned short 	cpu_prid;	/* Processor PRID value */
-	unsigned short 	cpu_fpirr;	/* FPU IRR value */
-	unsigned short 	cpu_speed;	/* Speed in MHZ */
-	unsigned short 	cpu_scachesz;	/* secondary cache size in MB */
-	unsigned short 	cpu_scachespeed;/* secondary cache speed in MHz */
+typedef struct klcpu_s {			  /* CPU */
+	klinfo_t	cpu_info;
+	unsigned short	cpu_prid;	/* Processor PRID value */
+	unsigned short	cpu_fpirr;	/* FPU IRR value */
+	unsigned short	cpu_speed;	/* Speed in MHZ */
+	unsigned short	cpu_scachesz;	/* secondary cache size in MB */
+	unsigned short	cpu_scachespeed;/* secondary cache speed in MHz */
 } klcpu_t ;
 
 #define CPU_STRUCT_VERSION   2
 
 typedef struct klhub_s {			/* HUB */
-	klinfo_t 	hub_info;
-	unsigned int 		hub_flags;		/* PCFG_HUB_xxx flags */
+	klinfo_t	hub_info;
+	unsigned int		hub_flags;		/* PCFG_HUB_xxx flags */
 	klport_t	hub_port;		/* hub is connected to this */
 	nic_t		hub_box_nic;		/* nic of containing box */
 	klconf_off_t	hub_mfg_nic;		/* MFG NIC string */
@@ -612,36 +612,36 @@
 } klhub_t ;
 
 typedef struct klhub_uart_s {			/* HUB */
-	klinfo_t 	hubuart_info;
-	unsigned int 		hubuart_flags;		/* PCFG_HUB_xxx flags */
+	klinfo_t	hubuart_info;
+	unsigned int		hubuart_flags;		/* PCFG_HUB_xxx flags */
 	nic_t		hubuart_box_nic;	/* nic of containing box */
 } klhub_uart_t ;
 
-#define MEMORY_STRUCT_VERSION   2
+#define MEMORY_STRUCT_VERSION	2
 
 typedef struct klmembnk_s {			/* MEMORY BANK */
-	klinfo_t 	membnk_info;
-	short 		membnk_memsz;		/* Total memory in megabytes */
+	klinfo_t	membnk_info;
+	short		membnk_memsz;		/* Total memory in megabytes */
 	short		membnk_dimm_select; /* bank to physical addr mapping*/
 	short		membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */
 	short		membnk_attr;
 } klmembnk_t ;
 
 #define KLCONFIG_MEMBNK_SIZE(_info, _bank)	\
-                            ((_info)->membnk_bnksz[(_bank)])
+			    ((_info)->membnk_bnksz[(_bank)])
 
 
 #define MEMBNK_PREMIUM 1
 #define KLCONFIG_MEMBNK_PREMIUM(_info, _bank)	\
-                            ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank)))
+			    ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank)))
 
 #define MAX_SERIAL_NUM_SIZE 10
 
 typedef struct klmod_serial_num_s {
-      klinfo_t        snum_info;
+      klinfo_t	      snum_info;
       union {
-              char snum_str[MAX_SERIAL_NUM_SIZE];
-              unsigned long long       snum_int;
+	      char snum_str[MAX_SERIAL_NUM_SIZE];
+	      unsigned long long       snum_int;
       } snum;
 } klmod_serial_num_t;
 
@@ -650,43 +650,43 @@
    serial number struct as a component without losing compatibility
    between prom versions. */
 
-#define GET_SNUM_COMP(_l) 	((klmod_serial_num_t *)\
+#define GET_SNUM_COMP(_l)	((klmod_serial_num_t *)\
 				KLCF_COMP(_l, _l->brd_numcompts))
 
 #define MAX_XBOW_LINKS 16
 
-typedef struct klxbow_s {                          /* XBOW */
-	klinfo_t 	xbow_info ;
+typedef struct klxbow_s {			   /* XBOW */
+	klinfo_t	xbow_info ;
 	klport_t	xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */
-        int		xbow_master_hub_link;
-        /* type of brd connected+component struct ptr+flags */
+	int		xbow_master_hub_link;
+	/* type of brd connected+component struct ptr+flags */
 } klxbow_t ;
 
 #define MAX_PCI_SLOTS 8
 
 typedef struct klpci_device_s {
 	s32	pci_device_id;	/* 32 bits of vendor/device ID. */
-	s32	pci_device_pad;	/* 32 bits of padding. */
+	s32	pci_device_pad; /* 32 bits of padding. */
 } klpci_device_t;
 
 #define BRIDGE_STRUCT_VERSION	2
 
-typedef struct klbri_s {                          /* BRIDGE */
-	klinfo_t 	bri_info ;
-	unsigned char	bri_eprominfo ;    /* IO6prom connected to bridge */
-	unsigned char	bri_bustype ;      /* PCI/VME BUS bridge/GIO */
-	pci_t    	pci_specific  ;    /* PCI Board config info */
+typedef struct klbri_s {			  /* BRIDGE */
+	klinfo_t	bri_info ;
+	unsigned char	bri_eprominfo ;	   /* IO6prom connected to bridge */
+	unsigned char	bri_bustype ;	   /* PCI/VME BUS bridge/GIO */
+	pci_t		pci_specific  ;	   /* PCI Board config info */
 	klpci_device_t	bri_devices[MAX_PCI_DEVS] ;	/* PCI IDs */
 	klconf_off_t	bri_mfg_nic ;
 } klbri_t ;
 
 #define MAX_IOC3_TTY	2
 
-typedef struct klioc3_s {                          /* IOC3 */
-	klinfo_t 	ioc3_info ;
-	unsigned char	ioc3_ssram ;        /* Info about ssram */
-	unsigned char	ioc3_nvram ;        /* Info about nvram */
-	klinfo_t	ioc3_superio ;      /* Info about superio */
+typedef struct klioc3_s {			   /* IOC3 */
+	klinfo_t	ioc3_info ;
+	unsigned char	ioc3_ssram ;	    /* Info about ssram */
+	unsigned char	ioc3_nvram ;	    /* Info about nvram */
+	klinfo_t	ioc3_superio ;	    /* Info about superio */
 	klconf_off_t	ioc3_tty_off ;
 	klinfo_t	ioc3_enet ;
 	klconf_off_t	ioc3_enet_off ;
@@ -695,27 +695,27 @@
 
 #define MAX_VME_SLOTS 8
 
-typedef struct klvmeb_s {                          /* VME BRIDGE - PCI CTLR */
-	klinfo_t 	vmeb_info ;
+typedef struct klvmeb_s {			   /* VME BRIDGE - PCI CTLR */
+	klinfo_t	vmeb_info ;
 	vmeb_t		vmeb_specific ;
-	klconf_off_t   	vmeb_brdinfo[MAX_VME_SLOTS]   ;    /* VME Board config info */
+	klconf_off_t	vmeb_brdinfo[MAX_VME_SLOTS]   ;	   /* VME Board config info */
 } klvmeb_t ;
 
-typedef struct klvmed_s {                          /* VME DEVICE - VME BOARD */
+typedef struct klvmed_s {			   /* VME DEVICE - VME BOARD */
 	klinfo_t	vmed_info ;
 	vmed_t		vmed_specific ;
-	klconf_off_t   	vmed_brdinfo[MAX_VME_SLOTS]   ;    /* VME Board config info */
+	klconf_off_t	vmed_brdinfo[MAX_VME_SLOTS]   ;	   /* VME Board config info */
 } klvmed_t ;
 
 #define ROUTER_VECTOR_VERS	2
 
 /* XXX - Don't we need the number of ports here?!? */
-typedef struct klrou_s {                          /* ROUTER */
-	klinfo_t 	rou_info ;
-	unsigned int		rou_flags ;           /* PCFG_ROUTER_xxx flags */
-	nic_t		rou_box_nic ;         /* nic of the containing module */
-	klport_t 	rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */
-	klconf_off_t	rou_mfg_nic ;     /* MFG NIC string */
+typedef struct klrou_s {			  /* ROUTER */
+	klinfo_t	rou_info ;
+	unsigned int		rou_flags ;	      /* PCFG_ROUTER_xxx flags */
+	nic_t		rou_box_nic ;	      /* nic of the containing module */
+	klport_t	rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */
+	klconf_off_t	rou_mfg_nic ;	  /* MFG NIC string */
 	u64	rou_vector;	  /* vector from master node */
 } klrou_t ;
 
@@ -732,30 +732,30 @@
 #define KLGFX_COOKIE	0x0c0de000
 
 typedef struct klgfx_s {		/* GRAPHICS Device */
-	klinfo_t 	gfx_info;
-	klconf_off_t    old_gndevs;	/* for compatibility with older proms */
-	klconf_off_t    old_gdoff0;	/* for compatibility with older proms */
+	klinfo_t	gfx_info;
+	klconf_off_t	old_gndevs;	/* for compatibility with older proms */
+	klconf_off_t	old_gdoff0;	/* for compatibility with older proms */
 	unsigned int		cookie;		/* for compatibility with older proms */
 	unsigned int		moduleslot;
 	struct klgfx_s	*gfx_next_pipe;
 	graphics_t	gfx_specific;
-	klconf_off_t    pad0;		/* for compatibility with older proms */
-	klconf_off_t    gfx_mfg_nic;
+	klconf_off_t	pad0;		/* for compatibility with older proms */
+	klconf_off_t	gfx_mfg_nic;
 } klgfx_t;
 
 typedef struct klxthd_s {
-	klinfo_t 	xthd_info ;
-	klconf_off_t	xthd_mfg_nic ;        /* MFG NIC string */
+	klinfo_t	xthd_info ;
+	klconf_off_t	xthd_mfg_nic ;	      /* MFG NIC string */
 } klxthd_t ;
 
-typedef struct kltpu_s {                     /* TPU board */
-	klinfo_t 	tpu_info ;
-	klconf_off_t	tpu_mfg_nic ;        /* MFG NIC string */
+typedef struct kltpu_s {		     /* TPU board */
+	klinfo_t	tpu_info ;
+	klconf_off_t	tpu_mfg_nic ;	     /* MFG NIC string */
 } kltpu_t ;
 
-typedef struct klgsn_s {                     /* GSN board */
-	klinfo_t 	gsn_info ;
-	klconf_off_t	gsn_mfg_nic ;        /* MFG NIC string */
+typedef struct klgsn_s {		     /* GSN board */
+	klinfo_t	gsn_info ;
+	klconf_off_t	gsn_mfg_nic ;	     /* MFG NIC string */
 } klgsn_t ;
 
 #define MAX_SCSI_DEVS 16
@@ -767,57 +767,57 @@
  * that as the size to be klmalloced.
  */
 
-typedef struct klscsi_s {                          /* SCSI Controller */
-	klinfo_t 	scsi_info ;
-	scsi_t       	scsi_specific   ;
-	unsigned char 	scsi_numdevs ;
+typedef struct klscsi_s {			   /* SCSI Controller */
+	klinfo_t	scsi_info ;
+	scsi_t		scsi_specific	;
+	unsigned char	scsi_numdevs ;
 	klconf_off_t	scsi_devinfo[MAX_SCSI_DEVS] ;
 } klscsi_t ;
 
-typedef struct klscdev_s {                          /* SCSI device */
-	klinfo_t 	scdev_info ;
+typedef struct klscdev_s {			    /* SCSI device */
+	klinfo_t	scdev_info ;
 	struct scsidisk_data *scdev_cfg ; /* driver fills up this */
 } klscdev_t ;
 
-typedef struct klttydev_s {                          /* TTY device */
-	klinfo_t 	ttydev_info ;
+typedef struct klttydev_s {			     /* TTY device */
+	klinfo_t	ttydev_info ;
 	struct terminal_data *ttydev_cfg ; /* driver fills up this */
 } klttydev_t ;
 
-typedef struct klenetdev_s {                          /* ENET device */
-	klinfo_t 	enetdev_info ;
+typedef struct klenetdev_s {			      /* ENET device */
+	klinfo_t	enetdev_info ;
 	struct net_data *enetdev_cfg ; /* driver fills up this */
 } klenetdev_t ;
 
-typedef struct klkbddev_s {                          /* KBD device */
-	klinfo_t 	kbddev_info ;
+typedef struct klkbddev_s {			     /* KBD device */
+	klinfo_t	kbddev_info ;
 	struct keyboard_data *kbddev_cfg ; /* driver fills up this */
 } klkbddev_t ;
 
-typedef struct klmsdev_s {                          /* mouse device */
-        klinfo_t        msdev_info ;
-        void 		*msdev_cfg ;
+typedef struct klmsdev_s {			    /* mouse device */
+	klinfo_t	msdev_info ;
+	void		*msdev_cfg ;
 } klmsdev_t ;
 
 #define MAX_FDDI_DEVS 10 /* XXX Is this true */
 
-typedef struct klfddi_s {                          /* FDDI */
-	klinfo_t 	fddi_info ;
-	fddi_t        	fddi_specific ;
+typedef struct klfddi_s {			   /* FDDI */
+	klinfo_t	fddi_info ;
+	fddi_t		fddi_specific ;
 	klconf_off_t	fddi_devinfo[MAX_FDDI_DEVS] ;
 } klfddi_t ;
 
-typedef struct klmio_s {                          /* MIO */
-	klinfo_t 	mio_info ;
-	mio_t       	mio_specific   ;
+typedef struct klmio_s {			  /* MIO */
+	klinfo_t	mio_info ;
+	mio_t		mio_specific   ;
 } klmio_t ;
 
 
 typedef union klcomp_s {
 	klcpu_t		kc_cpu;
 	klhub_t		kc_hub;
-	klmembnk_t 	kc_mem;
-	klxbow_t  	kc_xbow;
+	klmembnk_t	kc_mem;
+	klxbow_t	kc_xbow;
 	klbri_t		kc_bri;
 	klioc3_t	kc_ioc3;
 	klvmeb_t	kc_vmeb;
@@ -831,11 +831,11 @@
 	klmod_serial_num_t kc_snum ;
 } klcomp_t;
 
-typedef union kldev_s {      /* for device structure allocation */
+typedef union kldev_s {	     /* for device structure allocation */
 	klscdev_t	kc_scsi_dev ;
 	klttydev_t	kc_tty_dev ;
 	klenetdev_t	kc_enet_dev ;
-	klkbddev_t 	kc_kbd_dev ;
+	klkbddev_t	kc_kbd_dev ;
 } kldev_t ;
 
 /* Data structure interface routines. TBD */
diff --git a/arch/mips/include/asm/sn/kldir.h b/arch/mips/include/asm/sn/kldir.h
index 1327e12..bfb3aec 100644
--- a/arch/mips/include/asm/sn/kldir.h
+++ b/arch/mips/include/asm/sn/kldir.h
@@ -16,8 +16,8 @@
  * The kldir memory area resides at a fixed place in each node's memory and
  * provides pointers to most other IP27 memory areas.  This allows us to
  * resize and/or relocate memory areas at a later time without breaking all
- * firmware and kernels that use them.  Indices in the array are
- * permanently dedicated to areas listed below.  Some memory areas (marked
+ * firmware and kernels that use them.	Indices in the array are
+ * permanently dedicated to areas listed below.	 Some memory areas (marked
  * below) reside at a permanently fixed location, but are included in the
  * directory for completeness.
  */
@@ -28,98 +28,98 @@
  * The upper portion of the memory map applies during boot
  * only and is overwritten by IRIX/SYMMON.
  *
- *                                    MEMORY MAP PER NODE
+ *				      MEMORY MAP PER NODE
  *
- * 0x2000000 (32M)         +-----------------------------------------+
- *                         |      IO6 BUFFERS FOR FLASH ENET IOC3    |
- * 0x1F80000 (31.5M)       +-----------------------------------------+
- *                         |      IO6 TEXT/DATA/BSS/stack            |
- * 0x1C00000 (30M)         +-----------------------------------------+
- *                         |      IO6 PROM DEBUG TEXT/DATA/BSS/stack |
- * 0x0800000 (28M)         +-----------------------------------------+
- *                         |      IP27 PROM TEXT/DATA/BSS/stack      |
- * 0x1B00000 (27M)         +-----------------------------------------+
- *                         |      IP27 CFG                           |
- * 0x1A00000 (26M)         +-----------------------------------------+
- *                         |      Graphics PROM                      |
- * 0x1800000 (24M)         +-----------------------------------------+
- *                         |      3rd Party PROM drivers             |
- * 0x1600000 (22M)         +-----------------------------------------+
- *                         |                                         |
- *                         |      Free                               |
- *                         |                                         |
- *                         +-----------------------------------------+
- *                         |      UNIX DEBUG Version                 |
- * 0x190000 (2M--)         +-----------------------------------------+
- *                         |      SYMMON                             |
- *                         |      (For UNIX Debug only)              |
- * 0x34000 (208K)          +-----------------------------------------+
- *                         |      SYMMON STACK [NUM_CPU_PER_NODE]    |
- *                         |      (For UNIX Debug only)              |
- * 0x25000 (148K)          +-----------------------------------------+
- *                         |      KLCONFIG - II (temp)               |
- *                         |                                         |
- *                         |    ----------------------------         |
- *                         |                                         |
- *                         |      UNIX NON-DEBUG Version             |
- * 0x19000 (100K)          +-----------------------------------------+
+ * 0x2000000 (32M)	   +-----------------------------------------+
+ *			   |	  IO6 BUFFERS FOR FLASH ENET IOC3    |
+ * 0x1F80000 (31.5M)	   +-----------------------------------------+
+ *			   |	  IO6 TEXT/DATA/BSS/stack	     |
+ * 0x1C00000 (30M)	   +-----------------------------------------+
+ *			   |	  IO6 PROM DEBUG TEXT/DATA/BSS/stack |
+ * 0x0800000 (28M)	   +-----------------------------------------+
+ *			   |	  IP27 PROM TEXT/DATA/BSS/stack	     |
+ * 0x1B00000 (27M)	   +-----------------------------------------+
+ *			   |	  IP27 CFG			     |
+ * 0x1A00000 (26M)	   +-----------------------------------------+
+ *			   |	  Graphics PROM			     |
+ * 0x1800000 (24M)	   +-----------------------------------------+
+ *			   |	  3rd Party PROM drivers	     |
+ * 0x1600000 (22M)	   +-----------------------------------------+
+ *			   |					     |
+ *			   |	  Free				     |
+ *			   |					     |
+ *			   +-----------------------------------------+
+ *			   |	  UNIX DEBUG Version		     |
+ * 0x190000 (2M--)	   +-----------------------------------------+
+ *			   |	  SYMMON			     |
+ *			   |	  (For UNIX Debug only)		     |
+ * 0x34000 (208K)	   +-----------------------------------------+
+ *			   |	  SYMMON STACK [NUM_CPU_PER_NODE]    |
+ *			   |	  (For UNIX Debug only)		     |
+ * 0x25000 (148K)	   +-----------------------------------------+
+ *			   |	  KLCONFIG - II (temp)		     |
+ *			   |					     |
+ *			   |	----------------------------	     |
+ *			   |					     |
+ *			   |	  UNIX NON-DEBUG Version	     |
+ * 0x19000 (100K)	   +-----------------------------------------+
  *
  *
  * The lower portion of the memory map contains information that is
  * permanent and is used by the IP27PROM, IO6PROM and IRIX.
  *
- * 0x19000 (100K)          +-----------------------------------------+
- *                         |                                         |
- *                         |      PI Error Spools (32K)              |
- *                         |                                         |
- * 0x12000 (72K)           +-----------------------------------------+
- *                         |      Unused                             |
- * 0x11c00 (71K)           +-----------------------------------------+
- *                         |      CPU 1 NMI Eframe area       	     |
- * 0x11a00 (70.5K)         +-----------------------------------------+
- *                         |      CPU 0 NMI Eframe area       	     |
- * 0x11800 (70K)           +-----------------------------------------+
- *                         |      CPU 1 NMI Register save area       |
- * 0x11600 (69.5K)         +-----------------------------------------+
- *                         |      CPU 0 NMI Register save area       |
- * 0x11400 (69K)           +-----------------------------------------+
- *                         |      GDA (1k)                           |
- * 0x11000 (68K)           +-----------------------------------------+
- *                         |      Early cache Exception stack        |
- *                         |             and/or                      |
- *			   |      kernel/io6prom nmi registers	     |
+ * 0x19000 (100K)	   +-----------------------------------------+
+ *			   |					     |
+ *			   |	  PI Error Spools (32K)		     |
+ *			   |					     |
+ * 0x12000 (72K)	   +-----------------------------------------+
+ *			   |	  Unused			     |
+ * 0x11c00 (71K)	   +-----------------------------------------+
+ *			   |	  CPU 1 NMI Eframe area		     |
+ * 0x11a00 (70.5K)	   +-----------------------------------------+
+ *			   |	  CPU 0 NMI Eframe area		     |
+ * 0x11800 (70K)	   +-----------------------------------------+
+ *			   |	  CPU 1 NMI Register save area	     |
+ * 0x11600 (69.5K)	   +-----------------------------------------+
+ *			   |	  CPU 0 NMI Register save area	     |
+ * 0x11400 (69K)	   +-----------------------------------------+
+ *			   |	  GDA (1k)			     |
+ * 0x11000 (68K)	   +-----------------------------------------+
+ *			   |	  Early cache Exception stack	     |
+ *			   |		 and/or			     |
+ *			   |	  kernel/io6prom nmi registers	     |
  * 0x10800  (66k)	   +-----------------------------------------+
- *			   |      cache error eframe   	 	     |
- * 0x10400 (65K)           +-----------------------------------------+
- *                         |      Exception Handlers (UALIAS copy)   |
- * 0x10000 (64K)           +-----------------------------------------+
- *                         |                                         |
- *                         |                                         |
- *                         |      KLCONFIG - I (permanent) (48K)     |
- *                         |                                         |
- *                         |                                         |
- *                         |                                         |
- * 0x4000 (16K)            +-----------------------------------------+
- *                         |      NMI Handler (Protected Page)       |
- * 0x3000 (12K)            +-----------------------------------------+
- *                         |      ARCS PVECTORS (master node only)   |
- * 0x2c00 (11K)            +-----------------------------------------+
- *                         |      ARCS TVECTORS (master node only)   |
- * 0x2800 (10K)            +-----------------------------------------+
- *                         |      LAUNCH [NUM_CPU]                   |
- * 0x2400 (9K)             +-----------------------------------------+
- *                         |      Low memory directory (KLDIR)       |
- * 0x2000 (8K)             +-----------------------------------------+
- *                         |      ARCS SPB (1K)                      |
- * 0x1000 (4K)             +-----------------------------------------+
- *                         |      Early cache Exception stack        |
- *                         |             and/or                      |
- *			   |      kernel/io6prom nmi registers	     |
- * 0x800  (2k)	           +-----------------------------------------+
- *			   |      cache error eframe   	 	     |
- * 0x400 (1K)              +-----------------------------------------+
- *                         |      Exception Handlers                 |
- * 0x0   (0K)              +-----------------------------------------+
+ *			   |	  cache error eframe		     |
+ * 0x10400 (65K)	   +-----------------------------------------+
+ *			   |	  Exception Handlers (UALIAS copy)   |
+ * 0x10000 (64K)	   +-----------------------------------------+
+ *			   |					     |
+ *			   |					     |
+ *			   |	  KLCONFIG - I (permanent) (48K)     |
+ *			   |					     |
+ *			   |					     |
+ *			   |					     |
+ * 0x4000 (16K)		   +-----------------------------------------+
+ *			   |	  NMI Handler (Protected Page)	     |
+ * 0x3000 (12K)		   +-----------------------------------------+
+ *			   |	  ARCS PVECTORS (master node only)   |
+ * 0x2c00 (11K)		   +-----------------------------------------+
+ *			   |	  ARCS TVECTORS (master node only)   |
+ * 0x2800 (10K)		   +-----------------------------------------+
+ *			   |	  LAUNCH [NUM_CPU]		     |
+ * 0x2400 (9K)		   +-----------------------------------------+
+ *			   |	  Low memory directory (KLDIR)	     |
+ * 0x2000 (8K)		   +-----------------------------------------+
+ *			   |	  ARCS SPB (1K)			     |
+ * 0x1000 (4K)		   +-----------------------------------------+
+ *			   |	  Early cache Exception stack	     |
+ *			   |		 and/or			     |
+ *			   |	  kernel/io6prom nmi registers	     |
+ * 0x800  (2k)		   +-----------------------------------------+
+ *			   |	  cache error eframe		     |
+ * 0x400 (1K)		   +-----------------------------------------+
+ *			   |	  Exception Handlers		     |
+ * 0x0	 (0K)		   +-----------------------------------------+
  */
 
 #ifdef __ASSEMBLY__
@@ -202,13 +202,13 @@
 
 #ifndef __ASSEMBLY__
 typedef struct kldir_ent_s {
-	u64		magic;		/* Indicates validity of entry      */
+	u64		magic;		/* Indicates validity of entry	    */
 	off_t		offset;		/* Offset from start of node space  */
 	unsigned long	pointer;	/* Pointer to area in some cases    */
-	size_t		size;		/* Size in bytes 		    */
+	size_t		size;		/* Size in bytes		    */
 	u64		count;		/* Repeat count if array, 1 if not  */
-	size_t		stride;		/* Stride if array, 0 if not        */
-	char		rsvd[16];	/* Pad entry to 0x40 bytes          */
+	size_t		stride;		/* Stride if array, 0 if not	    */
+	char		rsvd[16];	/* Pad entry to 0x40 bytes	    */
 	/* NOTE: These 16 bytes are used in the Partition KLDIR
 	   entry to store partition info. Refer to klpart.h for this. */
 } kldir_ent_t;
diff --git a/arch/mips/include/asm/sn/launch.h b/arch/mips/include/asm/sn/launch.h
index b7c2226..04226d8 100644
--- a/arch/mips/include/asm/sn/launch.h
+++ b/arch/mips/include/asm/sn/launch.h
@@ -19,7 +19,7 @@
  *
  * The master stores launch parameters in the launch structure
  * corresponding to a target processor that is in a slave loop, then sends
- * an interrupt to the slave processor.  The slave calls the desired
+ * an interrupt to the slave processor.	 The slave calls the desired
  * function, then returns to the slave loop.  The master may poll or wait
  * for the slaves to finish.
  *
@@ -33,7 +33,7 @@
 #define LAUNCH_PADSZ		0xa0
 #endif
 
-#define LAUNCH_OFF_MAGIC	0x00	/* Struct offsets for assembly      */
+#define LAUNCH_OFF_MAGIC	0x00	/* Struct offsets for assembly	    */
 #define LAUNCH_OFF_BUSY		0x08
 #define LAUNCH_OFF_CALL		0x10
 #define LAUNCH_OFF_CALLC	0x18
@@ -44,7 +44,7 @@
 #define LAUNCH_OFF_BEVNORMAL	0x40
 #define LAUNCH_OFF_BEVECC	0x48
 
-#define LAUNCH_STATE_DONE	0	/* Return value of LAUNCH_POLL      */
+#define LAUNCH_STATE_DONE	0	/* Return value of LAUNCH_POLL	    */
 #define LAUNCH_STATE_SENT	1
 #define LAUNCH_STATE_RECD	2
 
@@ -65,16 +65,16 @@
 typedef void (*launch_proc_t)(u64 call_parm);
 
 typedef struct launch_s {
-	volatile u64		magic;	/* Magic number                     */
-	volatile u64		busy;	/* Slave currently active           */
+	volatile u64		magic;	/* Magic number			    */
+	volatile u64		busy;	/* Slave currently active	    */
 	volatile launch_proc_t	call_addr;	/* Func. for slave to call  */
 	volatile u64		call_addr_c;	/* 1's complement of call_addr*/
 	volatile u64		call_parm;	/* Single parm passed to call*/
 	volatile void *stack_addr;	/* Stack pointer for slave function */
 	volatile void *gp_addr;		/* Global pointer for slave func.   */
-	volatile char 		*bevutlb;/* Address of bev utlb ex handler   */
-	volatile char 		*bevnormal;/*Address of bev normal ex handler */
-	volatile char 		*bevecc;/* Address of bev cache err handler */
+	volatile char		*bevutlb;/* Address of bev utlb ex handler   */
+	volatile char		*bevnormal;/*Address of bev normal ex handler */
+	volatile char		*bevecc;/* Address of bev cache err handler */
 	volatile char		pad[160];	/* Pad to LAUNCH_SIZEOF	    */
 } launch_t;
 
diff --git a/arch/mips/include/asm/sn/mapped_kernel.h b/arch/mips/include/asm/sn/mapped_kernel.h
index 721496a..401f3b0 100644
--- a/arch/mips/include/asm/sn/mapped_kernel.h
+++ b/arch/mips/include/asm/sn/mapped_kernel.h
@@ -48,7 +48,7 @@
 
 #endif /* CONFIG_MAPPED_KERNEL */
 
-#define MAPPED_KERN_RO_TO_K0(x)	PHYS_TO_K0(MAPPED_KERN_RO_TO_PHYS(x))
-#define MAPPED_KERN_RW_TO_K0(x)	PHYS_TO_K0(MAPPED_KERN_RW_TO_PHYS(x))
+#define MAPPED_KERN_RO_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RO_TO_PHYS(x))
+#define MAPPED_KERN_RW_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RW_TO_PHYS(x))
 
 #endif /* __ASM_SN_MAPPED_KERNEL_H  */
diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h
index 1af4989..12ac210 100644
--- a/arch/mips/include/asm/sn/nmi.h
+++ b/arch/mips/include/asm/sn/nmi.h
@@ -19,7 +19,7 @@
  *
  * The master stores launch parameters in the launch structure
  * corresponding to a target processor that is in a slave loop, then sends
- * an interrupt to the slave processor.  The slave calls the desired
+ * an interrupt to the slave processor.	 The slave calls the desired
  * function, followed by an optional rendezvous function, then returns to
  * the slave loop.  The master does not wait for the slaves before
  * returning.
@@ -31,7 +31,7 @@
 #define NMI_MAGIC		0x48414d4d455201
 #define NMI_SIZEOF		0x40
 
-#define NMI_OFF_MAGIC		0x00	/* Struct offsets for assembly      */
+#define NMI_OFF_MAGIC		0x00	/* Struct offsets for assembly	    */
 #define NMI_OFF_FLAGS		0x08
 #define NMI_OFF_CALL		0x10
 #define NMI_OFF_CALLC		0x18
@@ -53,8 +53,8 @@
 typedef struct nmi_s {
 	volatile unsigned long	 magic;		/* Magic number */
 	volatile unsigned long	 flags;		/* Combination of flags above */
-	volatile void *call_addr;	/* Routine for slave to call        */
-	volatile void *call_addr_c;	/* 1's complement of address        */
+	volatile void *call_addr;	/* Routine for slave to call	    */
+	volatile void *call_addr_c;	/* 1's complement of address	    */
 	volatile void *call_parm;	/* Single parm passed to call	    */
 	volatile unsigned long	 gmaster;	/* Flag true only on global master*/
 } nmi_t;
diff --git a/arch/mips/include/asm/sn/sn0/addrs.h b/arch/mips/include/asm/sn/sn0/addrs.h
index b061900..6b53070 100644
--- a/arch/mips/include/asm/sn/sn0/addrs.h
+++ b/arch/mips/include/asm/sn/sn0/addrs.h
@@ -29,7 +29,7 @@
  * chapter of the Hub specification.
  *
  * NOTE: This header file is included both by C and by assembler source
- *	 files.  Please bracket any language-dependent definitions
+ *	 files.	 Please bracket any language-dependent definitions
  *	 appropriately.
  */
 
@@ -102,14 +102,14 @@
 
 #define BWIN_INDEX_BITS		3
 #define BWIN_SIZE		(UINT64_CAST 1 << BWIN_SIZE_BITS)
-#define	BWIN_SIZEMASK		(BWIN_SIZE - 1)
-#define	BWIN_WIDGET_MASK	0x7
+#define BWIN_SIZEMASK		(BWIN_SIZE - 1)
+#define BWIN_WIDGET_MASK	0x7
 #define NODE_BWIN_BASE0(nasid)	(NODE_IO_BASE(nasid) + BWIN_SIZE)
-#define NODE_BWIN_BASE(nasid, bigwin)	(NODE_BWIN_BASE0(nasid) + 	\
+#define NODE_BWIN_BASE(nasid, bigwin)	(NODE_BWIN_BASE0(nasid) +	\
 			(UINT64_CAST(bigwin) << BWIN_SIZE_BITS))
 
-#define	BWIN_WIDGETADDR(addr)	((addr) & BWIN_SIZEMASK)
-#define	BWIN_WINDOWNUM(addr)	(((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
+#define BWIN_WIDGETADDR(addr)	((addr) & BWIN_SIZEMASK)
+#define BWIN_WINDOWNUM(addr)	(((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
 /*
  * Verify if addr belongs to large window address of node with "nasid"
  *
@@ -120,7 +120,7 @@
  *
  */
 
-#define	NODE_BWIN_ADDR(nasid, addr)	\
+#define NODE_BWIN_ADDR(nasid, addr)	\
 		(((addr) >= NODE_BWIN_BASE0(nasid)) && \
 		 ((addr) < (NODE_BWIN_BASE(nasid, HUB_NUM_BIG_WINDOW) + \
 				BWIN_SIZE)))
@@ -129,7 +129,7 @@
  * The following define the major position-independent aliases used
  * in SN0.
  *	CALIAS -- Varies in size, points to the first n bytes of memory
- *		  	on the reader's node.
+ *			on the reader's node.
  */
 
 #define CALIAS_BASE		CAC_BASE
@@ -146,7 +146,7 @@
 
 #ifndef __ASSEMBLY__
 #define KERN_NMI_ADDR(nasid, slice)					\
-                    TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + 	\
+		    TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET +	\
 				  (IP27_NMI_KREGS_CPU_SIZE * (slice)))
 #endif /* !__ASSEMBLY__ */
 
@@ -203,7 +203,7 @@
 
 #define IO6PROM_BASE		PHYS_TO_K0(0x01c00000)
 #define IO6PROM_SIZE		0x400000
-#define	IO6PROM_BASE_MAPPED	(UNCAC_BASE | 0x11c00000)
+#define IO6PROM_BASE_MAPPED	(UNCAC_BASE | 0x11c00000)
 #define IO6DPROM_BASE		PHYS_TO_K0(0x01c00000)
 #define IO6DPROM_SIZE		0x200000
 
diff --git a/arch/mips/include/asm/sn/sn0/arch.h b/arch/mips/include/asm/sn/sn0/arch.h
index f734f20..425a67e 100644
--- a/arch/mips/include/asm/sn/sn0/arch.h
+++ b/arch/mips/include/asm/sn/sn0/arch.h
@@ -12,23 +12,23 @@
 #define _ASM_SN_SN0_ARCH_H
 
 
-#ifndef SN0XXL  /* 128 cpu SMP max */
+#ifndef SN0XXL	/* 128 cpu SMP max */
 /*
  * This is the maximum number of nodes that can be part of a kernel.
  * Effectively, it's the maximum number of compact node ids (cnodeid_t).
  */
-#define MAX_COMPACT_NODES       64
+#define MAX_COMPACT_NODES	64
 
 /*
  * MAXCPUS refers to the maximum number of CPUs in a single kernel.
  * This is not necessarily the same as MAXNODES * CPUS_PER_NODE
  */
-#define MAXCPUS                 128
+#define MAXCPUS			128
 
 #else /* SN0XXL system */
 
-#define MAX_COMPACT_NODES       128
-#define MAXCPUS                 256
+#define MAX_COMPACT_NODES	128
+#define MAXCPUS			256
 
 #endif /* SN0XXL */
 
@@ -41,9 +41,9 @@
 /*
  * MAX_REGIONS refers to the maximum number of hardware partitioned regions.
  */
-#define	MAX_REGIONS		64
-#define MAX_NONPREMIUM_REGIONS  16
-#define MAX_PREMIUM_REGIONS     MAX_REGIONS
+#define MAX_REGIONS		64
+#define MAX_NONPREMIUM_REGIONS	16
+#define MAX_PREMIUM_REGIONS	MAX_REGIONS
 
 /*
  * MAX_PARITIONS refers to the maximum number of logically defined
@@ -57,12 +57,12 @@
  * Slot constants for SN0
  */
 #ifdef CONFIG_SGI_SN_N_MODE
-#define MAX_MEM_SLOTS   16                      /* max slots per node */
+#define MAX_MEM_SLOTS	16			/* max slots per node */
 #else /* !CONFIG_SGI_SN_N_MODE, assume CONFIG_SGI_SN_M_MODE */
-#define MAX_MEM_SLOTS   32                      /* max slots per node */
+#define MAX_MEM_SLOTS	32			/* max slots per node */
 #endif /* CONFIG_SGI_SN_M_MODE */
 
-#define SLOT_SHIFT      	(27)
+#define SLOT_SHIFT		(27)
 #define SLOT_MIN_MEM_SIZE	(32*1024*1024)
 
 #define CPUS_PER_NODE		2	/* CPUs on a single hub */
diff --git a/arch/mips/include/asm/sn/sn0/hub.h b/arch/mips/include/asm/sn/sn0/hub.h
index 3e228f8e7..d78dd76 100644
--- a/arch/mips/include/asm/sn/sn0/hub.h
+++ b/arch/mips/include/asm/sn/sn0/hub.h
@@ -19,8 +19,8 @@
 #define HUB_REV_2_0		2
 #define HUB_REV_2_1		3
 #define HUB_REV_2_2		4
-#define HUB_REV_2_3             5
-#define HUB_REV_2_4             6
+#define HUB_REV_2_3		5
+#define HUB_REV_2_4		6
 
 #define MAX_HUB_PATH		80
 
@@ -32,9 +32,9 @@
 //#include <asm/sn/sn0/hubcore.h>
 
 /* Translation of uncached attributes */
-#define	UATTR_HSPEC	0
-#define	UATTR_IO	1
-#define	UATTR_MSPEC	2
-#define	UATTR_UNCAC	3
+#define UATTR_HSPEC	0
+#define UATTR_IO	1
+#define UATTR_MSPEC	2
+#define UATTR_UNCAC	3
 
 #endif /* _ASM_SN_SN0_HUB_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h
index 46286d8..5998b13 100644
--- a/arch/mips/include/asm/sn/sn0/hubio.h
+++ b/arch/mips/include/asm/sn/sn0/hubio.h
@@ -8,8 +8,8 @@
  * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
  * Copyright (C) 1999 by Ralf Baechle
  */
-#ifndef	_ASM_SGI_SN_SN0_HUBIO_H
-#define	_ASM_SGI_SN_SN0_HUBIO_H
+#ifndef _ASM_SGI_SN_SN0_HUBIO_H
+#define _ASM_SGI_SN_SN0_HUBIO_H
 
 /*
  * Hub I/O interface registers
@@ -22,7 +22,7 @@
  * Slightly friendlier names for some common registers.
  * The hardware definitions follow.
  */
-#define IIO_WIDGET		IIO_WID      /* Widget identification */
+#define IIO_WIDGET		IIO_WID	     /* Widget identification */
 #define IIO_WIDGET_STAT		IIO_WSTAT    /* Widget status register */
 #define IIO_WIDGET_CTRL		IIO_WCR	     /* Widget control register */
 #define IIO_WIDGET_TOUT		IIO_WRTO     /* Widget request timeout */
@@ -37,21 +37,21 @@
 #define IIO_XTALKCC_TOUT	IIO_IXCC     /* Xtalk credit count timeout*/
 #define IIO_XTALKTT_TOUT	IIO_IXTT     /* Xtalk tail timeout */
 #define IIO_IO_ERR_CLR		IIO_IECLR    /* IO error clear */
-#define IIO_BTE_CRB_CNT         IIO_IBCN     /* IO BTE CRB count */
+#define IIO_BTE_CRB_CNT		IIO_IBCN     /* IO BTE CRB count */
 
 #define IIO_LLP_CSR_IS_UP		0x00002000
-#define	IIO_LLP_CSR_LLP_STAT_MASK	0x00003000
-#define	IIO_LLP_CSR_LLP_STAT_SHFT	12
+#define IIO_LLP_CSR_LLP_STAT_MASK	0x00003000
+#define IIO_LLP_CSR_LLP_STAT_SHFT	12
 
 /* key to IIO_PROTECT_OVRRD */
 #define IIO_PROTECT_OVRRD_KEY	0x53474972756c6573ull	/* "SGIrules" */
 
 /* BTE register names */
 #define IIO_BTE_STAT_0		IIO_IBLS_0   /* Also BTE length/status 0 */
-#define IIO_BTE_SRC_0		IIO_IBSA_0   /* Also BTE source address  0 */
+#define IIO_BTE_SRC_0		IIO_IBSA_0   /* Also BTE source address	 0 */
 #define IIO_BTE_DEST_0		IIO_IBDA_0   /* Also BTE dest. address 0 */
 #define IIO_BTE_CTRL_0		IIO_IBCT_0   /* Also BTE control/terminate 0 */
-#define IIO_BTE_NOTIFY_0 	IIO_IBNA_0   /* Also BTE notification 0 */
+#define IIO_BTE_NOTIFY_0	IIO_IBNA_0   /* Also BTE notification 0 */
 #define IIO_BTE_INT_0		IIO_IBIA_0   /* Also BTE interrupt 0 */
 #define IIO_BTE_OFF_0		0	     /* Base offset from BTE 0 regs. */
 #define IIO_BTE_OFF_1	IIO_IBLS_1 - IIO_IBLS_0 /* Offset from base to BTE 1 */
@@ -83,11 +83,11 @@
 #define IIO_WSTAT	0x400008	/* Widget status */
 #define IIO_WCR		0x400020	/* Widget control */
 
-#define	IIO_WSTAT_ECRAZY	(1ULL << 32)	/* Hub gone crazy */
-#define	IIO_WSTAT_TXRETRY	(1ULL << 9)	/* Hub Tx Retry timeout */
-#define	IIO_WSTAT_TXRETRY_MASK	(0x7F)
-#define	IIO_WSTAT_TXRETRY_SHFT	(16)
-#define	IIO_WSTAT_TXRETRY_CNT(w)	(((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
+#define IIO_WSTAT_ECRAZY	(1ULL << 32)	/* Hub gone crazy */
+#define IIO_WSTAT_TXRETRY	(1ULL << 9)	/* Hub Tx Retry timeout */
+#define IIO_WSTAT_TXRETRY_MASK	(0x7F)
+#define IIO_WSTAT_TXRETRY_SHFT	(16)
+#define IIO_WSTAT_TXRETRY_CNT(w)	(((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
 					  IIO_WSTAT_TXRETRY_MASK)
 
 #define IIO_ILAPR	0x400100	/* Local Access Protection */
@@ -130,12 +130,12 @@
 #define IIO_IGFX_INIT(widget, node, cpu, valid)				(\
 	(((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) |	 \
 	(((node)   & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) |	 \
-	(((cpu)    & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) |	 \
-	(((valid)  & IIO_IGFX_VLD_MASK)   << IIO_IGFX_VLD_SHIFT)	 )
+	(((cpu)	   & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) |	 \
+	(((valid)  & IIO_IGFX_VLD_MASK)	  << IIO_IGFX_VLD_SHIFT)	 )
 
 /* Scratch registers (not all bits available) */
 #define IIO_SCRATCH_REG0	0x400150
-#define	IIO_SCRATCH_REG1	0x400158
+#define IIO_SCRATCH_REG1	0x400158
 #define IIO_SCRATCH_MASK	0x0000000f00f11fff
 
 #define IIO_SCRATCH_BIT0_0	0x0000000800000000
@@ -174,43 +174,43 @@
 typedef union hubii_wid_u {
 	u64	wid_reg_value;
 	struct {
-		u64 	wid_rsvd: 	32,	/* unused */
+		u64	wid_rsvd:	32,	/* unused */
 			wid_rev_num:	 4,	/* revision number */
 			wid_part_num:	16,	/* the widget type: hub=c101 */
 			wid_mfg_num:	11,	/* Manufacturer id (IBM) */
 			wid_rsvd1:	 1;	/* Reserved */
-        } wid_fields_s;
+	} wid_fields_s;
 } hubii_wid_t;
 
 
 typedef union hubii_wcr_u {
 	u64	wcr_reg_value;
 	struct {
-		u64 	wcr_rsvd: 	41,	/* unused */
+		u64	wcr_rsvd:	41,	/* unused */
 			wcr_e_thresh:	 5,	/* elasticity threshold */
 			wcr_dir_con:	 1,	/* widget direct connect */
 			wcr_f_bad_pkt:	 1,	/* Force bad llp pkt enable */
 			wcr_xbar_crd:	 3,	/* LLP crossbar credit */
 			wcr_rsvd1:	 8,	/* Reserved */
-			wcr_tag_mode:    1,	/* Tag mode */
+			wcr_tag_mode:	 1,	/* Tag mode */
 			wcr_widget_id:	 4;	/* LLP crossbar credit */
-        } wcr_fields_s;
+	} wcr_fields_s;
 } hubii_wcr_t;
 
-#define	iwcr_dir_con	wcr_fields_s.wcr_dir_con
+#define iwcr_dir_con	wcr_fields_s.wcr_dir_con
 
 typedef union hubii_wstat_u {
-	u64      reg_value;
+	u64	 reg_value;
 	struct {
 		u64	rsvd1:		31,
 			crazy:		 1,	/* Crazy bit		*/
 			rsvd2:		 8,
-			llp_tx_cnt:	 8, 	/* LLP Xmit retry counter */
+			llp_tx_cnt:	 8,	/* LLP Xmit retry counter */
 			rsvd3:		 6,
 			tx_max_rtry:	 1,	/* LLP Retry Timeout Signal */
 			rsvd4:		 2,
 			xt_tail_to:	 1,	/* Xtalk Tail Timeout	*/
-			xt_crd_to:	 1,	/* Xtalk Credit Timeout	*/
+			xt_crd_to:	 1,	/* Xtalk Credit Timeout */
 			pending:	 4;	/* Pending Requests	*/
 	} wstat_fields_s;
 } hubii_wstat_t;
@@ -219,50 +219,50 @@
 typedef union hubii_ilcsr_u {
 	u64	icsr_reg_value;
 	struct {
-		u64 	icsr_rsvd: 	22,	/* unused */
-			icsr_max_burst:	10,	/* max burst */
-                        icsr_rsvd4:	 6,	/* reserved */
-			icsr_max_retry:	10,	/* max retry */
-                        icsr_rsvd3:	 2,	/* reserved */
-                        icsr_lnk_stat:	 2,	/* link status */
-                        icsr_bm8:	 1,	/* Bit mode 8 */
-                        icsr_llp_en:	 1,	/* LLP enable bit */
-			icsr_rsvd2:	 1,     /* reserver */
-                        icsr_wrm_reset:	 1,	/* Warm reset bit */
+		u64	icsr_rsvd:	22,	/* unused */
+			icsr_max_burst: 10,	/* max burst */
+			icsr_rsvd4:	 6,	/* reserved */
+			icsr_max_retry: 10,	/* max retry */
+			icsr_rsvd3:	 2,	/* reserved */
+			icsr_lnk_stat:	 2,	/* link status */
+			icsr_bm8:	 1,	/* Bit mode 8 */
+			icsr_llp_en:	 1,	/* LLP enable bit */
+			icsr_rsvd2:	 1,	/* reserver */
+			icsr_wrm_reset:	 1,	/* Warm reset bit */
 			icsr_rsvd1:	 2,	/* Data ready offset */
-                        icsr_null_to:	 6;	/* Null timeout   */
+			icsr_null_to:	 6;	/* Null timeout	  */
 
-        } icsr_fields_s;
+	} icsr_fields_s;
 } hubii_ilcsr_t;
 
 
 typedef union hubii_iowa_u {
 	u64	iowa_reg_value;
 	struct {
-		u64 	iowa_rsvd: 	48,	/* unused */
+		u64	iowa_rsvd:	48,	/* unused */
 			iowa_wxoac:	 8,	/* xtalk widget access bits */
 			iowa_rsvd1:	 7,	/* xtalk widget access bits */
 			iowa_w0oac:	 1;	/* xtalk widget access bits */
-        } iowa_fields_s;
+	} iowa_fields_s;
 } hubii_iowa_t;
 
 typedef union hubii_iiwa_u {
 	u64	iiwa_reg_value;
 	struct {
-		u64 	iiwa_rsvd: 	48,	/* unused */
+		u64	iiwa_rsvd:	48,	/* unused */
 			iiwa_wxiac:	 8,	/* hub wid access bits */
 			iiwa_rsvd1:	 7,	/* reserved */
 			iiwa_w0iac:	 1;	/* hub wid0 access */
-        } iiwa_fields_s;
+	} iiwa_fields_s;
 } hubii_iiwa_t;
 
 typedef union	hubii_illr_u {
 	u64	illr_reg_value;
 	struct {
-		u64 	illr_rsvd: 	32,	/* unused */
+		u64	illr_rsvd:	32,	/* unused */
 			illr_cb_cnt:	16,	/* checkbit error count */
 			illr_sn_cnt:	16;	/* sequence number count */
-        } illr_fields_s;
+	} illr_fields_s;
 } hubii_illr_t;
 
 /* The structures below are defined to extract and modify the ii
@@ -273,7 +273,7 @@
 typedef union io_perf_sel {
 	u64 perf_sel_reg;
 	struct {
-		u64 	perf_rsvd  : 48,
+		u64	perf_rsvd  : 48,
 			perf_icct  :  8,
 			perf_ippr1 :  4,
 			perf_ippr0 :  4;
@@ -301,7 +301,7 @@
 #define IIO_LLP_SN_MAX	0xffff
 
 /* IO PRB Entries */
-#define	IIO_NUM_IPRBS	(9)
+#define IIO_NUM_IPRBS	(9)
 #define IIO_IOPRB_0	0x400198	/* PRB entry 0 */
 #define IIO_IOPRB_8	0x4001a0	/* PRB entry 8 */
 #define IIO_IOPRB_9	0x4001a8	/* PRB entry 9 */
@@ -318,21 +318,21 @@
 #define IIO_IMEM	0x4001e8	/* Miscellaneous Enable Mask */
 #define IIO_IXTT	0x4001f0	/* Crosstalk tail timeout */
 #define IIO_IECLR	0x4001f8	/* IO error clear */
-#define IIO_IBCN        0x400200        /* IO BTE CRB count */
+#define IIO_IBCN	0x400200	/* IO BTE CRB count */
 
 /*
  * IIO_IMEM Register fields.
  */
-#define IIO_IMEM_W0ESD  0x1             /* Widget 0 shut down due to error */
-#define IIO_IMEM_B0ESD  (1 << 4)        /* BTE 0 shut down due to error */
-#define IIO_IMEM_B1ESD  (1 << 8)        /* BTE 1 Shut down due to error */
+#define IIO_IMEM_W0ESD	0x1		/* Widget 0 shut down due to error */
+#define IIO_IMEM_B0ESD	(1 << 4)	/* BTE 0 shut down due to error */
+#define IIO_IMEM_B1ESD	(1 << 8)	/* BTE 1 Shut down due to error */
 
 /* PIO Read address Table Entries */
 #define IIO_IPCA	0x400300	/* PRB Counter adjust */
 #define IIO_NUM_PRTES	8		/* Total number of PRB table entries */
 #define IIO_PRTE_0	0x400308	/* PIO Read address table entry 0 */
 #define IIO_PRTE(_x)	(IIO_PRTE_0 + (8 * (_x)))
-#define	IIO_WIDPRTE(x)	IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */
+#define IIO_WIDPRTE(x)	IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */
 #define IIO_IPDR	0x400388	/* PIO table entry deallocation */
 #define IIO_ICDR	0x400390	/* CRB Entry Deallocation */
 #define IIO_IFDR	0x400398	/* IOQ FIFO Depth */
@@ -369,35 +369,35 @@
 /*
  * IIO PIO Deallocation register field masks : (IIO_IPDR)
  */
-#define	IIO_IPDR_PND	(1 << 4)
+#define IIO_IPDR_PND	(1 << 4)
 
 /*
  * IIO CRB deallocation register field masks: (IIO_ICDR)
  */
-#define	IIO_ICDR_PND	(1 << 4)
+#define IIO_ICDR_PND	(1 << 4)
 
 /*
  * IIO CRB control register Fields: IIO_ICCR
  */
-#define	IIO_ICCR_PENDING	(0x10000)
-#define	IIO_ICCR_CMD_MASK	(0xFF)
-#define	IIO_ICCR_CMD_SHFT	(7)
-#define	IIO_ICCR_CMD_NOP	(0x0)	/* No Op */
-#define	IIO_ICCR_CMD_WAKE	(0x100) /* Reactivate CRB entry and process */
-#define	IIO_ICCR_CMD_TIMEOUT	(0x200)	/* Make CRB timeout & mark invalid */
-#define	IIO_ICCR_CMD_EJECT	(0x400)	/* Contents of entry written to memory
+#define IIO_ICCR_PENDING	(0x10000)
+#define IIO_ICCR_CMD_MASK	(0xFF)
+#define IIO_ICCR_CMD_SHFT	(7)
+#define IIO_ICCR_CMD_NOP	(0x0)	/* No Op */
+#define IIO_ICCR_CMD_WAKE	(0x100) /* Reactivate CRB entry and process */
+#define IIO_ICCR_CMD_TIMEOUT	(0x200) /* Make CRB timeout & mark invalid */
+#define IIO_ICCR_CMD_EJECT	(0x400) /* Contents of entry written to memory
 					 * via a WB
 					 */
-#define	IIO_ICCR_CMD_FLUSH	(0x800)
+#define IIO_ICCR_CMD_FLUSH	(0x800)
 
 /*
  * CRB manipulation macros
  *	The CRB macros are slightly complicated, since there are up to
- * 	four registers associated with each CRB entry.
+ *	four registers associated with each CRB entry.
  */
 #define IIO_NUM_CRBS		15	/* Number of CRBs */
-#define IIO_NUM_NORMAL_CRBS     12	/* Number of regular CRB entries */
-#define IIO_NUM_PC_CRBS 	4	/* Number of partial cache CRBs */
+#define IIO_NUM_NORMAL_CRBS	12	/* Number of regular CRB entries */
+#define IIO_NUM_PC_CRBS		4	/* Number of partial cache CRBs */
 #define IIO_ICRB_OFFSET		8
 #define IIO_ICRB_0		0x400400
 /* XXX - This is now tuneable:
@@ -405,9 +405,9 @@
  */
 
 #define IIO_ICRB_A(_x)	(IIO_ICRB_0 + (4 * IIO_ICRB_OFFSET * (_x)))
-#define IIO_ICRB_B(_x)  (IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET)
+#define IIO_ICRB_B(_x)	(IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET)
 #define IIO_ICRB_C(_x)	(IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET)
-#define IIO_ICRB_D(_x)  (IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET)
+#define IIO_ICRB_D(_x)	(IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET)
 
 /* XXX - IBUE register coming for Hub 2 */
 
@@ -444,16 +444,16 @@
 typedef union icrba_u {
 	u64	reg_value;
 	struct {
-		u64 	resvd: 	6,
+		u64	resvd:	6,
 			stall_bte0: 1,	/* Stall BTE 0 */
 			stall_bte1: 1,	/* Stall BTE 1 */
 			error:	1,	/* CRB has an error	*/
-			ecode:	3,	/* Error Code 		*/
+			ecode:	3,	/* Error Code		*/
 			lnetuce: 1,	/* SN0net Uncorrectable error */
-			mark:	1,	/* CRB Has been marked 	*/
+			mark:	1,	/* CRB Has been marked	*/
 			xerr:	1,	/* Error bit set in xtalk header */
 			sidn:	4,	/* SIDN field from xtalk	*/
-			tnum: 	5,	/* TNUM field in xtalk		*/
+			tnum:	5,	/* TNUM field in xtalk		*/
 			addr:	38,	/* Address of request	*/
 			valid:	1,	/* Valid status		*/
 			iow:	1;	/* IO Write operation	*/
@@ -467,15 +467,15 @@
 	u64	reg_value;
 
 	struct {
-		u64 	resvd: 	6,
-			unused:	1,	/* Unused but RW!!	*/
+		u64	resvd:	6,
+			unused: 1,	/* Unused but RW!!	*/
 			error:	1,	/* CRB has an error	*/
-			ecode:	4,	/* Error Code 		*/
+			ecode:	4,	/* Error Code		*/
 			lnetuce: 1,	/* SN0net Uncorrectable error */
-			mark:	1,	/* CRB Has been marked 	*/
+			mark:	1,	/* CRB Has been marked	*/
 			xerr:	1,	/* Error bit set in xtalk header */
 			sidn:	4,	/* SIDN field from xtalk	*/
-			tnum: 	5,	/* TNUM field in xtalk		*/
+			tnum:	5,	/* TNUM field in xtalk		*/
 			addr:	38,	/* Address of request	*/
 			valid:	1,	/* Valid status		*/
 			iow:	1;	/* IO Write operation	*/
@@ -488,21 +488,21 @@
 
 #endif /* !__ASSEMBLY__ */
 
-#define	IIO_ICRB_ADDR_SHFT	2	/* Shift to get proper address */
+#define IIO_ICRB_ADDR_SHFT	2	/* Shift to get proper address */
 
 /*
  * values for "ecode" field
  */
-#define	IIO_ICRB_ECODE_DERR	0	/* Directory error due to IIO access */
-#define	IIO_ICRB_ECODE_PERR	1	/* Poison error on IO access */
-#define	IIO_ICRB_ECODE_WERR	2	/* Write error by IIO access
+#define IIO_ICRB_ECODE_DERR	0	/* Directory error due to IIO access */
+#define IIO_ICRB_ECODE_PERR	1	/* Poison error on IO access */
+#define IIO_ICRB_ECODE_WERR	2	/* Write error by IIO access
 					 * e.g. WINV to a Read only line.
 					 */
-#define	IIO_ICRB_ECODE_AERR	3	/* Access error caused by IIO access */
-#define	IIO_ICRB_ECODE_PWERR	4	/* Error on partial write	*/
-#define	IIO_ICRB_ECODE_PRERR	5	/* Error on partial read	*/
-#define	IIO_ICRB_ECODE_TOUT	6	/* CRB timeout before deallocating */
-#define	IIO_ICRB_ECODE_XTERR	7	/* Incoming xtalk pkt had error bit */
+#define IIO_ICRB_ECODE_AERR	3	/* Access error caused by IIO access */
+#define IIO_ICRB_ECODE_PWERR	4	/* Error on partial write	*/
+#define IIO_ICRB_ECODE_PRERR	5	/* Error on partial read	*/
+#define IIO_ICRB_ECODE_TOUT	6	/* CRB timeout before deallocating */
+#define IIO_ICRB_ECODE_XTERR	7	/* Incoming xtalk pkt had error bit */
 
 
 
@@ -513,10 +513,10 @@
 typedef union icrbb_u {
 	u64	reg_value;
 	struct {
-	    u64	rsvd1:	5,
-		btenum:	1,	/* BTE to which entry belongs to */
-		cohtrans: 1,	/* Coherent transaction	*/
-		xtsize:	2,	/* Xtalk operation size
+	    u64 rsvd1:	5,
+		btenum: 1,	/* BTE to which entry belongs to */
+		cohtrans: 1,	/* Coherent transaction */
+		xtsize: 2,	/* Xtalk operation size
 				 * 0: Double Word
 				 * 1: 32 Bytes.
 				 * 2: 128 Bytes,
@@ -526,11 +526,11 @@
 		srcinit: 2,	/* Source Initiator:
 				 * See below for field values.
 				 */
-		useold:	1,	/* Use OLD command for processing */
+		useold: 1,	/* Use OLD command for processing */
 		imsgtype: 2,	/* Incoming message type
 				 * see below for field values
 				 */
-		imsg: 	8,	/* Incoming message 	*/
+		imsg:	8,	/* Incoming message	*/
 		initator: 3,	/* Initiator of original request
 				 * See below for field values.
 				 */
@@ -538,12 +538,12 @@
 				 * See below for field values.
 				 */
 		rsvd2:	7,
-		ackcnt:	11,	/* Invalidate ack count	*/
+		ackcnt: 11,	/* Invalidate ack count */
 		resp:	1,	/* data response  given to processor */
-		ack: 	1,	/* indicates data ack received 	*/
+		ack:	1,	/* indicates data ack received	*/
 		hold:	1,	/* entry is gathering inval acks */
 		wb_pend:1,	/* waiting for writeback to complete */
-		intvn: 	1,	/* Intervention */
+		intvn:	1,	/* Intervention */
 		stall_ib: 1,	/* Stall Ibuf (from crosstalk) */
 		stall_intr: 1;	/* Stall internal interrupts */
 	} icrbb_field_s;
@@ -556,9 +556,9 @@
 	u64	reg_value;
 	struct {
 		u64	rsvd1:	5,
-			btenum:	1,	/* BTE to which entry belongs to */
-			cohtrans: 1,	/* Coherent transaction	*/
-			xtsize:	2,	/* Xtalk operation size
+			btenum: 1,	/* BTE to which entry belongs to */
+			cohtrans: 1,	/* Coherent transaction */
+			xtsize: 2,	/* Xtalk operation size
 					 * 0: Double Word
 					 * 1: 32 Bytes.
 					 * 2: 128 Bytes,
@@ -568,99 +568,99 @@
 			srcinit: 2,	/* Source Initiator:
 					 * See below for field values.
 					 */
-			useold:	1,	/* Use OLD command for processing */
+			useold: 1,	/* Use OLD command for processing */
 			imsgtype: 2,	/* Incoming message type
 					 * see below for field values
 					 */
-			imsg: 	8,	/* Incoming message 	*/
+			imsg:	8,	/* Incoming message	*/
 			initator: 3,	/* Initiator of original request
 					 * See below for field values.
 					 */
-			rsvd2: 	1,
+			rsvd2:	1,
 			pcache: 1,	/* entry belongs to partial cache */
 			reqtype: 5,	/* Identifies type of request
 					 * See below for field values.
 					 */
-			stl_ib:	1,	/* stall Ibus coming from xtalk	*/
+			stl_ib: 1,	/* stall Ibus coming from xtalk */
 			stl_intr: 1,	/* Stall internal interrupts */
-			stl_bte0: 1,	/* Stall BTE 0 	*/
+			stl_bte0: 1,	/* Stall BTE 0	*/
 			stl_bte1: 1,	/* Stall BTE 1	*/
-			intrvn:	1,	/* Req was target of intervention */
-			ackcnt:	11,	/* Invalidate ack count	*/
+			intrvn: 1,	/* Req was target of intervention */
+			ackcnt: 11,	/* Invalidate ack count */
 			resp:	1,	/* data response  given to processor */
-			ack: 	1,	/* indicates data ack received 	*/
+			ack:	1,	/* indicates data ack received	*/
 			hold:	1,	/* entry is gathering inval acks */
 			wb_pend:1,	/* waiting for writeback to complete */
-			sleep: 	1,	/* xtalk req sleeping till IO-sync */
+			sleep:	1,	/* xtalk req sleeping till IO-sync */
 			pnd_reply: 1,	/* replies not issed due to IOQ full */
 			pnd_req: 1;	/* reqs not issued due to IOQ full */
 	} h1_icrbb_field_s;
 } h1_icrbb_t;
 
 
-#define	b_imsgtype	icrbb_field_s.imsgtype
-#define	b_btenum	icrbb_field_s.btenum
-#define	b_cohtrans	icrbb_field_s.cohtrans
-#define	b_xtsize	icrbb_field_s.xtsize
-#define	b_srcnode	icrbb_field_s.srcnode
-#define	b_srcinit	icrbb_field_s.srcinit
-#define	b_imsgtype	icrbb_field_s.imsgtype
-#define	b_imsg		icrbb_field_s.imsg
-#define	b_initiator	icrbb_field_s.initiator
+#define b_imsgtype	icrbb_field_s.imsgtype
+#define b_btenum	icrbb_field_s.btenum
+#define b_cohtrans	icrbb_field_s.cohtrans
+#define b_xtsize	icrbb_field_s.xtsize
+#define b_srcnode	icrbb_field_s.srcnode
+#define b_srcinit	icrbb_field_s.srcinit
+#define b_imsgtype	icrbb_field_s.imsgtype
+#define b_imsg		icrbb_field_s.imsg
+#define b_initiator	icrbb_field_s.initiator
 
 #endif /* !__ASSEMBLY__ */
 
 /*
  * values for field xtsize
  */
-#define	IIO_ICRB_XTSIZE_DW	0	/* Xtalk operation size is 8 bytes  */
-#define	IIO_ICRB_XTSIZE_32	1	/* Xtalk operation size is 32 bytes */
-#define	IIO_ICRB_XTSIZE_128	2	/* Xtalk operation size is 128 bytes */
+#define IIO_ICRB_XTSIZE_DW	0	/* Xtalk operation size is 8 bytes  */
+#define IIO_ICRB_XTSIZE_32	1	/* Xtalk operation size is 32 bytes */
+#define IIO_ICRB_XTSIZE_128	2	/* Xtalk operation size is 128 bytes */
 
 /*
  * values for field srcinit
  */
-#define	IIO_ICRB_PROC0		0	/* Source of request is Proc 0 */
-#define	IIO_ICRB_PROC1		1	/* Source of request is Proc 1 */
-#define	IIO_ICRB_GB_REQ		2	/* Source is Guaranteed BW request */
-#define	IIO_ICRB_IO_REQ		3	/* Source is Normal IO request	*/
+#define IIO_ICRB_PROC0		0	/* Source of request is Proc 0 */
+#define IIO_ICRB_PROC1		1	/* Source of request is Proc 1 */
+#define IIO_ICRB_GB_REQ		2	/* Source is Guaranteed BW request */
+#define IIO_ICRB_IO_REQ		3	/* Source is Normal IO request	*/
 
 /*
  * Values for field imsgtype
  */
-#define	IIO_ICRB_IMSGT_XTALK	0	/* Incoming Meessage from Xtalk	*/
-#define	IIO_ICRB_IMSGT_BTE	1	/* Incoming message from BTE 	*/
-#define	IIO_ICRB_IMSGT_SN0NET	2	/* Incoming message from SN0 net */
-#define	IIO_ICRB_IMSGT_CRB	3	/* Incoming message from CRB ???  */
+#define IIO_ICRB_IMSGT_XTALK	0	/* Incoming Meessage from Xtalk */
+#define IIO_ICRB_IMSGT_BTE	1	/* Incoming message from BTE	*/
+#define IIO_ICRB_IMSGT_SN0NET	2	/* Incoming message from SN0 net */
+#define IIO_ICRB_IMSGT_CRB	3	/* Incoming message from CRB ???  */
 
 /*
  * values for field initiator.
  */
-#define	IIO_ICRB_INIT_XTALK	0	/* Message originated in xtalk	*/
-#define	IIO_ICRB_INIT_BTE0	0x1	/* Message originated in BTE 0	*/
-#define	IIO_ICRB_INIT_SN0NET	0x2	/* Message originated in SN0net */
-#define	IIO_ICRB_INIT_CRB	0x3	/* Message originated in CRB ? 	*/
-#define	IIO_ICRB_INIT_BTE1	0x5	/* MEssage originated in BTE 1	*/
+#define IIO_ICRB_INIT_XTALK	0	/* Message originated in xtalk	*/
+#define IIO_ICRB_INIT_BTE0	0x1	/* Message originated in BTE 0	*/
+#define IIO_ICRB_INIT_SN0NET	0x2	/* Message originated in SN0net */
+#define IIO_ICRB_INIT_CRB	0x3	/* Message originated in CRB ?	*/
+#define IIO_ICRB_INIT_BTE1	0x5	/* MEssage originated in BTE 1	*/
 
 /*
  * Values for field reqtype.
  */
 /* XXX - Need to fix this for Hub 2 */
-#define	IIO_ICRB_REQ_DWRD	0	/* Request type double word	*/
-#define	IIO_ICRB_REQ_QCLRD	1	/* Request is Qrtr Caceh line Rd */
-#define	IIO_ICRB_REQ_BLKRD	2	/* Request is block read	*/
-#define	IIO_ICRB_REQ_RSHU	6	/* Request is BTE block read	*/
-#define	IIO_ICRB_REQ_REXU	7	/* request is BTE Excl Read	*/
-#define	IIO_ICRB_REQ_RDEX	8	/* Request is Read Exclusive	*/
-#define	IIO_ICRB_REQ_WINC	9	/* Request is Write Invalidate 	*/
-#define	IIO_ICRB_REQ_BWINV	10	/* Request is BTE Winv		*/
-#define	IIO_ICRB_REQ_PIORD	11	/* Request is PIO read		*/
-#define	IIO_ICRB_REQ_PIOWR	12	/* Request is PIO Write 	*/
-#define	IIO_ICRB_REQ_PRDM	13	/* Request is Fetch&Op		*/
-#define	IIO_ICRB_REQ_PWRM	14	/* Request is Store &Op		*/
-#define	IIO_ICRB_REQ_PTPWR	15	/* Request is Peer to peer	*/
-#define	IIO_ICRB_REQ_WB		16	/* Request is Write back	*/
-#define	IIO_ICRB_REQ_DEX	17	/* Retained DEX Cache line	*/
+#define IIO_ICRB_REQ_DWRD	0	/* Request type double word	*/
+#define IIO_ICRB_REQ_QCLRD	1	/* Request is Qrtr Caceh line Rd */
+#define IIO_ICRB_REQ_BLKRD	2	/* Request is block read	*/
+#define IIO_ICRB_REQ_RSHU	6	/* Request is BTE block read	*/
+#define IIO_ICRB_REQ_REXU	7	/* request is BTE Excl Read	*/
+#define IIO_ICRB_REQ_RDEX	8	/* Request is Read Exclusive	*/
+#define IIO_ICRB_REQ_WINC	9	/* Request is Write Invalidate	*/
+#define IIO_ICRB_REQ_BWINV	10	/* Request is BTE Winv		*/
+#define IIO_ICRB_REQ_PIORD	11	/* Request is PIO read		*/
+#define IIO_ICRB_REQ_PIOWR	12	/* Request is PIO Write		*/
+#define IIO_ICRB_REQ_PRDM	13	/* Request is Fetch&Op		*/
+#define IIO_ICRB_REQ_PWRM	14	/* Request is Store &Op		*/
+#define IIO_ICRB_REQ_PTPWR	15	/* Request is Peer to peer	*/
+#define IIO_ICRB_REQ_WB		16	/* Request is Write back	*/
+#define IIO_ICRB_REQ_DEX	17	/* Retained DEX Cache line	*/
 
 /*
  * Fields in CRB Register C
@@ -674,8 +674,8 @@
 		u64	rsvd:	6,
 			sleep:	1,
 			pricnt: 4,	/* Priority count sent with Read req */
-			pripsc: 4,	/* Priority Pre scalar 	*/
-			bteop:	1,	/* BTE Operation 	*/
+			pripsc: 4,	/* Priority Pre scalar	*/
+			bteop:	1,	/* BTE Operation	*/
 			push_be: 34,	/* Push address Byte enable
 					 * Holds push addr, if CRB is for BTE
 					 * If CRB belongs to Partial cache,
@@ -684,20 +684,20 @@
 					 */
 			suppl:	11,	/* Supplemental field	*/
 			barrop: 1,	/* Barrier Op bit set in xtalk req */
-			doresp: 1,	/* Xtalk req needs a response 	*/
-			gbr:	1;	/* GBR bit set in xtalk packet 	*/
+			doresp: 1,	/* Xtalk req needs a response	*/
+			gbr:	1;	/* GBR bit set in xtalk packet	*/
 	} icrbc_field_s;
 } icrbc_t;
 
-#define	c_pricnt	icrbc_field_s.pricnt
-#define	c_pripsc	icrbc_field_s.pripsc
-#define	c_bteop		icrbc_field_s.bteop
-#define	c_bteaddr	icrbc_field_s.push_be	/* push_be field has 2 names */
-#define c_benable 	icrbc_field_s.push_be	/* push_be field has 2 names */
-#define	c_suppl		icrbc_field_s.suppl
-#define	c_barrop	icrbc_field_s.barrop
-#define	c_doresp	icrbc_field_s.doresp
-#define	c_gbr	icrbc_field_s.gbr
+#define c_pricnt	icrbc_field_s.pricnt
+#define c_pripsc	icrbc_field_s.pripsc
+#define c_bteop		icrbc_field_s.bteop
+#define c_bteaddr	icrbc_field_s.push_be	/* push_be field has 2 names */
+#define c_benable	icrbc_field_s.push_be	/* push_be field has 2 names */
+#define c_suppl		icrbc_field_s.suppl
+#define c_barrop	icrbc_field_s.barrop
+#define c_doresp	icrbc_field_s.doresp
+#define c_gbr	icrbc_field_s.gbr
 #endif /* !__ASSEMBLY__ */
 
 /*
@@ -708,31 +708,31 @@
 typedef union icrbd_s {
 	u64	reg_value;
 	struct {
-	    u64	rsvd:	38,
+	    u64 rsvd:	38,
 		toutvld: 1,	/* Timeout in progress for this CRB */
-		ctxtvld: 1,	/* Context field below is valid	*/
+		ctxtvld: 1,	/* Context field below is valid */
 		rsvd2:	1,
-		context: 15, 	/* Bit vector:
+		context: 15,	/* Bit vector:
 				 * Has a bit set for each CRB entry
 				 * which needs to be deallocated
 				 * before this CRB entry is processed.
 				 * Set only for barrier operations.
 				 */
-		timeout: 8;	/* Timeout Upper 8 bits	*/
+		timeout: 8;	/* Timeout Upper 8 bits */
 	} icrbd_field_s;
 } icrbd_t;
 
-#define	icrbd_toutvld	icrbd_field_s.toutvld
-#define	icrbd_ctxtvld	icrbd_field_s.ctxtvld
-#define	icrbd_context	icrbd_field_s.context
+#define icrbd_toutvld	icrbd_field_s.toutvld
+#define icrbd_ctxtvld	icrbd_field_s.ctxtvld
+#define icrbd_context	icrbd_field_s.context
 
 
 typedef union hubii_ifdr_u {
 	u64	hi_ifdr_value;
 	struct {
 		u64	ifdr_rsvd:	49,
-	                ifdr_maxrp:	 7,
-	                ifdr_rsvd1:	 1,
+			ifdr_maxrp:	 7,
+			ifdr_rsvd1:	 1,
 			ifdr_maxrq:	 7;
 	} hi_ifdr_fields;
 } hubii_ifdr_t;
@@ -789,26 +789,26 @@
 typedef union iprte_a {
 	u64	entry;
 	struct {
-	    u64	rsvd1     : 7,  /* Reserved field 		*/
-		valid     : 1,	/* Maps to a timeout entry	*/
-		rsvd2     : 1,
-		srcnode   : 9,	/* Node which did this PIO	*/
-		initiator : 2,	/* If T5A or T5B or IO 		*/
-		rsvd3     : 3,
-		addr      : 38,	/* Physical address of PIO	*/
-		rsvd4     : 3;
+	    u64 rsvd1	  : 7,	/* Reserved field		*/
+		valid	  : 1,	/* Maps to a timeout entry	*/
+		rsvd2	  : 1,
+		srcnode	  : 9,	/* Node which did this PIO	*/
+		initiator : 2,	/* If T5A or T5B or IO		*/
+		rsvd3	  : 3,
+		addr	  : 38, /* Physical address of PIO	*/
+		rsvd4	  : 3;
 	} iprte_fields;
 } iprte_a_t;
 
-#define	iprte_valid	iprte_fields.valid
-#define	iprte_timeout	iprte_fields.timeout
-#define	iprte_srcnode	iprte_fields.srcnode
-#define	iprte_init	iprte_fields.initiator
-#define	iprte_addr	iprte_fields.addr
+#define iprte_valid	iprte_fields.valid
+#define iprte_timeout	iprte_fields.timeout
+#define iprte_srcnode	iprte_fields.srcnode
+#define iprte_init	iprte_fields.initiator
+#define iprte_addr	iprte_fields.addr
 
 #endif /* !__ASSEMBLY__ */
 
-#define	IPRTE_ADDRSHFT	3
+#define IPRTE_ADDRSHFT	3
 
 /*
  * Hub IIO PRB Register format.
@@ -823,14 +823,14 @@
 typedef union iprb_u {
 	u64	reg_value;
 	struct {
-	    u64	rsvd1:	15,
+	    u64 rsvd1:	15,
 		error:	1,	/* Widget rcvd wr resp pkt w/ error */
-		ovflow:	5,	/* Overflow count. perf measurement */
+		ovflow: 5,	/* Overflow count. perf measurement */
 		fire_and_forget: 1, /* Launch Write without response */
 		mode:	2,	/* Widget operation Mode	*/
 		rsvd2:	2,
 		bnakctr: 14,
-		rsvd3: 	2,
+		rsvd3:	2,
 		anakctr: 14,
 		xtalkctr: 8;
 	} iprb_fields_s;
@@ -838,13 +838,13 @@
 
 #define iprb_regval	reg_value
 
-#define	iprb_error	iprb_fields_s.error
-#define	iprb_ovflow	iprb_fields_s.ovflow
-#define	iprb_ff		iprb_fields_s.fire_and_forget
-#define	iprb_mode	iprb_fields_s.mode
-#define	iprb_bnakctr	iprb_fields_s.bnakctr
-#define	iprb_anakctr	iprb_fields_s.anakctr
-#define	iprb_xtalkctr	iprb_fields_s.xtalkctr
+#define iprb_error	iprb_fields_s.error
+#define iprb_ovflow	iprb_fields_s.ovflow
+#define iprb_ff		iprb_fields_s.fire_and_forget
+#define iprb_mode	iprb_fields_s.mode
+#define iprb_bnakctr	iprb_fields_s.bnakctr
+#define iprb_anakctr	iprb_fields_s.anakctr
+#define iprb_xtalkctr	iprb_fields_s.xtalkctr
 
 #endif /* !__ASSEMBLY__ */
 
@@ -853,10 +853,10 @@
  * For details of the meanings of NAK and Accept, refer the PIO flow
  * document
  */
-#define	IPRB_MODE_NORMAL	(0)
-#define	IPRB_MODE_COLLECT_A	(1)	/* PRB in collect A mode */
-#define	IPRB_MODE_SERVICE_A	(2)	/* NAK B and Accept A */
-#define	IPRB_MODE_SERVICE_B	(3)	/* NAK A and Accept B */
+#define IPRB_MODE_NORMAL	(0)
+#define IPRB_MODE_COLLECT_A	(1)	/* PRB in collect A mode */
+#define IPRB_MODE_SERVICE_A	(2)	/* NAK B and Accept A */
+#define IPRB_MODE_SERVICE_B	(3)	/* NAK A and Accept B */
 
 /*
  * IO CRB entry C_A to E_A : Partial (cache) CRBS
@@ -865,31 +865,31 @@
 typedef union icrbp_a {
 	u64   ip_reg;	    /* the entire register value	*/
 	struct {
-	     u64 error:	1,  /*    63, error occurred		*/
-		ln_uce:	1,  /*    62: uncorrectable memory 	*/
-		ln_ae:	1,  /*    61: protection violation 	*/
-		ln_werr:1,  /*    60: write access error 	*/
-		ln_aerr:1,  /*    59: sn0net: Address error	*/
-		ln_perr:1,  /*    58: sn0net: poison error	*/
-		timeout:1,  /*    57: CRB timed out		*/
-		l_bdpkt:1,  /*    56: truncated pkt on sn0net	*/
-		c_bdpkt:1,  /*    55: truncated pkt on xtalk	*/
-		c_err:	1,  /*    54: incoming xtalk req, err set*/
+	     u64 error: 1,  /*	  63, error occurred		*/
+		ln_uce: 1,  /*	  62: uncorrectable memory	*/
+		ln_ae:	1,  /*	  61: protection violation	*/
+		ln_werr:1,  /*	  60: write access error	*/
+		ln_aerr:1,  /*	  59: sn0net: Address error	*/
+		ln_perr:1,  /*	  58: sn0net: poison error	*/
+		timeout:1,  /*	  57: CRB timed out		*/
+		l_bdpkt:1,  /*	  56: truncated pkt on sn0net	*/
+		c_bdpkt:1,  /*	  55: truncated pkt on xtalk	*/
+		c_err:	1,  /*	  54: incoming xtalk req, err set*/
 		rsvd1: 12,  /* 53-42: reserved			*/
-		valid:	1,  /*    41: Valid status		*/
+		valid:	1,  /*	  41: Valid status		*/
 		sidn:	4,  /* 40-37: SIDN field of xtalk rqst	*/
 		tnum:	5,  /* 36-32: TNUM of xtalk request	*/
-		bo:	1,  /*    31: barrier op set in xtalk rqst*/
-		resprqd:1,  /*    30: xtalk rqst requires response*/
-		gbr:	1,  /*    29: gbr bit set in xtalk rqst	*/
+		bo:	1,  /*	  31: barrier op set in xtalk rqst*/
+		resprqd:1,  /*	  30: xtalk rqst requires response*/
+		gbr:	1,  /*	  29: gbr bit set in xtalk rqst */
 		size:	2,  /* 28-27: size of xtalk request	*/
 		excl:	4,  /* 26-23: exclusive bit(s)		*/
 		stall:	3,  /* 22-20: stall (xtalk, bte 0/1)	*/
-		intvn:	1,  /*    19: rqst target of intervention*/
-		resp:	1,  /*    18: Data response given to t5	*/
-		ack:	1,  /*    17: Data ack received.	*/
-		hold:	1,  /*    16: crb gathering invalidate acks*/
-		wb:	1,  /*    15: writeback pending.	*/
+		intvn:	1,  /*	  19: rqst target of intervention*/
+		resp:	1,  /*	  18: Data response given to t5 */
+		ack:	1,  /*	  17: Data ack received.	*/
+		hold:	1,  /*	  16: crb gathering invalidate acks*/
+		wb:	1,  /*	  15: writeback pending.	*/
 		ack_cnt:11, /* 14-04: counter of invalidate acks*/
 		tscaler:4;  /* 03-00: Timeout prescaler		*/
 	} ip_fmt;
@@ -908,13 +908,13 @@
 	u64 iin_reg;
 	struct {
 		u64 rsvd1 : 35,
-	            isent : 1,
-	            rsvd2 : 3,
-	            ienable: 1,
-	            rsvd  : 7,
-	            node  : 9,
-	            rsvd4 : 1,
-	            level : 7;
+		    isent : 1,
+		    rsvd2 : 3,
+		    ienable: 1,
+		    rsvd  : 7,
+		    node  : 9,
+		    rsvd4 : 1,
+		    level : 7;
 	} iin_fmt;
 } hubii_idsr_t;
 #endif /* !__ASSEMBLY__ */
@@ -966,7 +966,7 @@
  * Value of 3 is required by Xbow 1.1
  * We may be able to increase this to 4 with Xbow 1.2.
  */
-#define       HUBII_XBOW_CREDIT       3
+#define	      HUBII_XBOW_CREDIT	      3
 #define	      HUBII_XBOW_REV2_CREDIT  4
 
 #endif /* _ASM_SGI_SN_SN0_HUBIO_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubmd.h b/arch/mips/include/asm/sn/sn0/hubmd.h
index 14c225d..305d002 100644
--- a/arch/mips/include/asm/sn/sn0/hubmd.h
+++ b/arch/mips/include/asm/sn/sn0/hubmd.h
@@ -8,16 +8,16 @@
  * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
  * Copyright (C) 1999 by Ralf Baechle
  */
-#ifndef	_ASM_SN_SN0_HUBMD_H
-#define	_ASM_SN_SN0_HUBMD_H
+#ifndef _ASM_SN_SN0_HUBMD_H
+#define _ASM_SN_SN0_HUBMD_H
 
 
 /*
  * Hub Memory/Directory interface registers
  */
-#define CACHE_SLINE_SIZE        128	/* Secondary cache line size on SN0 */
+#define CACHE_SLINE_SIZE	128	/* Secondary cache line size on SN0 */
 
-#define	MAX_REGIONS		64
+#define MAX_REGIONS		64
 
 /* Hardware page size and shift */
 
@@ -34,62 +34,62 @@
 #define MD_IO_PROT_OVRRD	0x200008 /* Clear my bit in MD_IO_PROTECT   */
 #define MD_HSPEC_PROTECT	0x200010 /* BDDIR, LBOOT, RBOOT protection  */
 #define MD_MEMORY_CONFIG	0x200018 /* Memory/Directory DIMM control   */
-#define	MD_REFRESH_CONTROL	0x200020 /* Memory/Directory refresh ctrl   */
-#define	MD_FANDOP_CAC_STAT	0x200028 /* Fetch-and-op cache status 	    */
-#define	MD_MIG_DIFF_THRESH	0x200030 /* Page migr. count diff thresh.   */
-#define	MD_MIG_VALUE_THRESH	0x200038 /* Page migr. count abs. thresh.   */
-#define	MD_MIG_CANDIDATE	0x200040 /* Latest page migration candidate */
-#define	MD_MIG_CANDIDATE_CLR	0x200048 /* Clear page migration candidate  */
-#define MD_DIR_ERROR		0x200050 /* Directory DIMM error 	    */
-#define MD_DIR_ERROR_CLR	0x200058 /* Directory DIMM error clear 	    */
-#define MD_PROTOCOL_ERROR	0x200060 /* Directory protocol error 	    */
+#define MD_REFRESH_CONTROL	0x200020 /* Memory/Directory refresh ctrl   */
+#define MD_FANDOP_CAC_STAT	0x200028 /* Fetch-and-op cache status	    */
+#define MD_MIG_DIFF_THRESH	0x200030 /* Page migr. count diff thresh.   */
+#define MD_MIG_VALUE_THRESH	0x200038 /* Page migr. count abs. thresh.   */
+#define MD_MIG_CANDIDATE	0x200040 /* Latest page migration candidate */
+#define MD_MIG_CANDIDATE_CLR	0x200048 /* Clear page migration candidate  */
+#define MD_DIR_ERROR		0x200050 /* Directory DIMM error	    */
+#define MD_DIR_ERROR_CLR	0x200058 /* Directory DIMM error clear	    */
+#define MD_PROTOCOL_ERROR	0x200060 /* Directory protocol error	    */
 #define MD_PROTOCOL_ERROR_CLR	0x200068 /* Directory protocol error clear  */
-#define MD_MEM_ERROR		0x200070 /* Memory DIMM error 		    */
-#define MD_MEM_ERROR_CLR	0x200078 /* Memory DIMM error clear 	    */
-#define MD_MISC_ERROR		0x200080 /* Miscellaneous MD error 	    */
+#define MD_MEM_ERROR		0x200070 /* Memory DIMM error		    */
+#define MD_MEM_ERROR_CLR	0x200078 /* Memory DIMM error clear	    */
+#define MD_MISC_ERROR		0x200080 /* Miscellaneous MD error	    */
 #define MD_MISC_ERROR_CLR	0x200088 /* Miscellaneous MD error clear    */
 #define MD_MEM_DIMM_INIT	0x200090 /* Memory DIMM mode initization.   */
-#define MD_DIR_DIMM_INIT	0x200098 /* Directory DIMM mode init. 	    */
-#define MD_MOQ_SIZE		0x2000a0 /* MD outgoing queue size 	    */
+#define MD_DIR_DIMM_INIT	0x200098 /* Directory DIMM mode init.	    */
+#define MD_MOQ_SIZE		0x2000a0 /* MD outgoing queue size	    */
 #define MD_MLAN_CTL		0x2000a8 /* NIC (Microlan) control register */
 
-#define MD_PERF_SEL		0x210000 /* Select perf monitor events 	    */
-#define MD_PERF_CNT0		0x210010 /* Performance counter 0 	    */
-#define MD_PERF_CNT1		0x210018 /* Performance counter 1 	    */
-#define MD_PERF_CNT2		0x210020 /* Performance counter 2 	    */
-#define MD_PERF_CNT3		0x210028 /* Performance counter 3 	    */
-#define MD_PERF_CNT4		0x210030 /* Performance counter 4 	    */
-#define MD_PERF_CNT5		0x210038 /* Performance counter 5 	    */
+#define MD_PERF_SEL		0x210000 /* Select perf monitor events	    */
+#define MD_PERF_CNT0		0x210010 /* Performance counter 0	    */
+#define MD_PERF_CNT1		0x210018 /* Performance counter 1	    */
+#define MD_PERF_CNT2		0x210020 /* Performance counter 2	    */
+#define MD_PERF_CNT3		0x210028 /* Performance counter 3	    */
+#define MD_PERF_CNT4		0x210030 /* Performance counter 4	    */
+#define MD_PERF_CNT5		0x210038 /* Performance counter 5	    */
 
-#define MD_UREG0_0		0x220000 /* uController/UART 0 register     */
-#define MD_UREG0_1		0x220008 /* uController/UART 0 register     */
-#define MD_UREG0_2		0x220010 /* uController/UART 0 register     */
-#define MD_UREG0_3		0x220018 /* uController/UART 0 register     */
-#define MD_UREG0_4		0x220020 /* uController/UART 0 register     */
-#define MD_UREG0_5		0x220028 /* uController/UART 0 register     */
-#define MD_UREG0_6		0x220030 /* uController/UART 0 register     */
-#define MD_UREG0_7		0x220038 /* uController/UART 0 register     */
+#define MD_UREG0_0		0x220000 /* uController/UART 0 register	    */
+#define MD_UREG0_1		0x220008 /* uController/UART 0 register	    */
+#define MD_UREG0_2		0x220010 /* uController/UART 0 register	    */
+#define MD_UREG0_3		0x220018 /* uController/UART 0 register	    */
+#define MD_UREG0_4		0x220020 /* uController/UART 0 register	    */
+#define MD_UREG0_5		0x220028 /* uController/UART 0 register	    */
+#define MD_UREG0_6		0x220030 /* uController/UART 0 register	    */
+#define MD_UREG0_7		0x220038 /* uController/UART 0 register	    */
 
 #define MD_SLOTID_USTAT		0x220048 /* Hub slot ID & UART/uCtlr status */
-#define MD_LED0			0x220050 /* Eight-bit LED for CPU A 	    */
-#define MD_LED1			0x220058 /* Eight-bit LED for CPU B 	    */
+#define MD_LED0			0x220050 /* Eight-bit LED for CPU A	    */
+#define MD_LED1			0x220058 /* Eight-bit LED for CPU B	    */
 
-#define MD_UREG1_0		0x220080 /* uController/UART 1 register     */
-#define MD_UREG1_1		0x220088 /* uController/UART 1 register     */
-#define MD_UREG1_2		0x220090 /* uController/UART 1 register     */
-#define MD_UREG1_3		0x220098 /* uController/UART 1 register     */
-#define MD_UREG1_4		0x2200a0 /* uController/UART 1 register     */
-#define MD_UREG1_5		0x2200a8 /* uController/UART 1 register     */
-#define MD_UREG1_6		0x2200b0 /* uController/UART 1 register     */
-#define MD_UREG1_7		0x2200b8 /* uController/UART 1 register     */
-#define MD_UREG1_8		0x2200c0 /* uController/UART 1 register     */
-#define MD_UREG1_9		0x2200c8 /* uController/UART 1 register     */
-#define MD_UREG1_10		0x2200d0 /* uController/UART 1 register     */
-#define MD_UREG1_11		0x2200d8 /* uController/UART 1 register     */
-#define MD_UREG1_12		0x2200e0 /* uController/UART 1 register     */
-#define MD_UREG1_13		0x2200e8 /* uController/UART 1 register     */
-#define MD_UREG1_14		0x2200f0 /* uController/UART 1 register     */
-#define MD_UREG1_15		0x2200f8 /* uController/UART 1 register     */
+#define MD_UREG1_0		0x220080 /* uController/UART 1 register	    */
+#define MD_UREG1_1		0x220088 /* uController/UART 1 register	    */
+#define MD_UREG1_2		0x220090 /* uController/UART 1 register	    */
+#define MD_UREG1_3		0x220098 /* uController/UART 1 register	    */
+#define MD_UREG1_4		0x2200a0 /* uController/UART 1 register	    */
+#define MD_UREG1_5		0x2200a8 /* uController/UART 1 register	    */
+#define MD_UREG1_6		0x2200b0 /* uController/UART 1 register	    */
+#define MD_UREG1_7		0x2200b8 /* uController/UART 1 register	    */
+#define MD_UREG1_8		0x2200c0 /* uController/UART 1 register	    */
+#define MD_UREG1_9		0x2200c8 /* uController/UART 1 register	    */
+#define MD_UREG1_10		0x2200d0 /* uController/UART 1 register	    */
+#define MD_UREG1_11		0x2200d8 /* uController/UART 1 register	    */
+#define MD_UREG1_12		0x2200e0 /* uController/UART 1 register	    */
+#define MD_UREG1_13		0x2200e8 /* uController/UART 1 register	    */
+#define MD_UREG1_14		0x2200f0 /* uController/UART 1 register	    */
+#define MD_UREG1_15		0x2200f8 /* uController/UART 1 register	    */
 
 #ifdef CONFIG_SGI_SN_N_MODE
 #define MD_MEM_BANKS		4	 /* 4 banks of memory max in N mode */
@@ -106,14 +106,14 @@
  *   Bits not used by the MD are used by software.
  */
 
-#define MD_SIZE_EMPTY		0	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_EMPTY		0	/* Valid in MEMORY_CONFIG	    */
 #define MD_SIZE_8MB		1
 #define MD_SIZE_16MB		2
 #define MD_SIZE_32MB		3	/* Broken in Hub 1		    */
-#define MD_SIZE_64MB		4	/* Valid in MEMORY_CONFIG           */
-#define MD_SIZE_128MB		5	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_64MB		4	/* Valid in MEMORY_CONFIG	    */
+#define MD_SIZE_128MB		5	/* Valid in MEMORY_CONFIG	    */
 #define MD_SIZE_256MB		6
-#define MD_SIZE_512MB		7	/* Valid in MEMORY_CONFIG           */
+#define MD_SIZE_512MB		7	/* Valid in MEMORY_CONFIG	    */
 #define MD_SIZE_1GB		8
 #define MD_SIZE_2GB		9
 #define MD_SIZE_4GB		10
@@ -207,16 +207,16 @@
 
 /* MD_SLOTID_USTAT bit definitions */
 
-#define MSU_CORECLK_TST_SHFT	7	/* You don't wanna know             */
+#define MSU_CORECLK_TST_SHFT	7	/* You don't wanna know		    */
 #define MSU_CORECLK_TST_MASK	(UINT64_CAST 1 << 7)
 #define MSU_CORECLK_TST		(UINT64_CAST 1 << 7)
-#define MSU_CORECLK_SHFT	6	/* You don't wanna know             */
+#define MSU_CORECLK_SHFT	6	/* You don't wanna know		    */
 #define MSU_CORECLK_MASK	(UINT64_CAST 1 << 6)
 #define MSU_CORECLK		(UINT64_CAST 1 << 6)
-#define MSU_NETSYNC_SHFT	5	/* You don't wanna know             */
+#define MSU_NETSYNC_SHFT	5	/* You don't wanna know		    */
 #define MSU_NETSYNC_MASK	(UINT64_CAST 1 << 5)
 #define MSU_NETSYNC		(UINT64_CAST 1 << 5)
-#define MSU_FPROMRDY_SHFT	4	/* Flash PROM ready bit 	    */
+#define MSU_FPROMRDY_SHFT	4	/* Flash PROM ready bit		    */
 #define MSU_FPROMRDY_MASK	(UINT64_CAST 1 << 4)
 #define MSU_FPROMRDY		(UINT64_CAST 1 << 4)
 #define MSU_I2CINTR_SHFT		3	/* I2C interrupt bit   */
@@ -228,8 +228,8 @@
 #define MSU_SN00_SLOTID_SHFT	7
 #define MSU_SN00_SLOTID_MASK	(UINT64_CAST 0x80)
 
-#define	MSU_PIMM_PSC_SHFT	4
-#define	MSU_PIMM_PSC_MASK	(0xf << MSU_PIMM_PSC_SHFT)
+#define MSU_PIMM_PSC_SHFT	4
+#define MSU_PIMM_PSC_MASK	(0xf << MSU_PIMM_PSC_SHFT)
 
 /* MD_MIG_DIFF_THRESH bit definitions */
 
@@ -260,7 +260,7 @@
 
 /* Other MD definitions */
 
-#define MD_BANK_SHFT		29			/* log2(512 MB)     */
+#define MD_BANK_SHFT		29			/* log2(512 MB)	    */
 #define MD_BANK_MASK		(UINT64_CAST 7 << 29)
 #define MD_BANK_SIZE		(UINT64_CAST 1 << MD_BANK_SHFT)	  /* 512 MB */
 #define MD_BANK_OFFSET(_b)	(UINT64_CAST (_b) << MD_BANK_SHFT)
@@ -300,32 +300,32 @@
  * Format C:  STATE != shared (FINE must be 0)
  */
 
-#define MD_PDIR_MASK		0xffffffffffff		/* Whole entry 	    */
+#define MD_PDIR_MASK		0xffffffffffff		/* Whole entry	    */
 #define MD_PDIR_ECC_SHFT	0			/* ABC low or high  */
 #define MD_PDIR_ECC_MASK	0x7f
-#define MD_PDIR_PRIO_SHFT	8			/* ABC low 	    */
+#define MD_PDIR_PRIO_SHFT	8			/* ABC low	    */
 #define MD_PDIR_PRIO_MASK	(0xf << 8)
-#define MD_PDIR_AX_SHFT		7			/* ABC low 	    */
+#define MD_PDIR_AX_SHFT		7			/* ABC low	    */
 #define MD_PDIR_AX_MASK		(1 << 7)
 #define MD_PDIR_AX		(1 << 7)
-#define MD_PDIR_FINE_SHFT	12			/* ABC low 	    */
+#define MD_PDIR_FINE_SHFT	12			/* ABC low	    */
 #define MD_PDIR_FINE_MASK	(1 << 12)
 #define MD_PDIR_FINE		(1 << 12)
-#define MD_PDIR_OCT_SHFT	13			/* A low 	    */
+#define MD_PDIR_OCT_SHFT	13			/* A low	    */
 #define MD_PDIR_OCT_MASK	(7 << 13)
-#define MD_PDIR_STATE_SHFT	13			/* BC low 	    */
+#define MD_PDIR_STATE_SHFT	13			/* BC low	    */
 #define MD_PDIR_STATE_MASK	(7 << 13)
-#define MD_PDIR_ONECNT_SHFT	16			/* BC low 	    */
+#define MD_PDIR_ONECNT_SHFT	16			/* BC low	    */
 #define MD_PDIR_ONECNT_MASK	(0x3f << 16)
-#define MD_PDIR_PTR_SHFT	22			/* C low 	    */
+#define MD_PDIR_PTR_SHFT	22			/* C low	    */
 #define MD_PDIR_PTR_MASK	(UINT64_CAST 0x7ff << 22)
-#define MD_PDIR_VECMSB_SHFT	22			/* AB low 	    */
+#define MD_PDIR_VECMSB_SHFT	22			/* AB low	    */
 #define MD_PDIR_VECMSB_BITMASK	0x3ffffff
 #define MD_PDIR_VECMSB_BITSHFT	27
 #define MD_PDIR_VECMSB_MASK	(UINT64_CAST MD_PDIR_VECMSB_BITMASK << 22)
-#define MD_PDIR_CWOFF_SHFT	7			/* C high 	    */
+#define MD_PDIR_CWOFF_SHFT	7			/* C high	    */
 #define MD_PDIR_CWOFF_MASK	(7 << 7)
-#define MD_PDIR_VECLSB_SHFT	10			/* AB high 	    */
+#define MD_PDIR_VECLSB_SHFT	10			/* AB high	    */
 #define MD_PDIR_VECLSB_BITMASK	(UINT64_CAST 0x3fffffffff)
 #define MD_PDIR_VECLSB_BITSHFT	0
 #define MD_PDIR_VECLSB_MASK	(MD_PDIR_VECLSB_BITMASK << 10)
@@ -349,25 +349,25 @@
  * Format C:  STATE != shared
  */
 
-#define MD_SDIR_MASK		0xffff			/* Whole entry 	    */
+#define MD_SDIR_MASK		0xffff			/* Whole entry	    */
 #define MD_SDIR_ECC_SHFT	0			/* AC low or high   */
 #define MD_SDIR_ECC_MASK	0x1f
-#define MD_SDIR_PRIO_SHFT	6			/* AC low 	    */
+#define MD_SDIR_PRIO_SHFT	6			/* AC low	    */
 #define MD_SDIR_PRIO_MASK	(1 << 6)
-#define MD_SDIR_AX_SHFT		5			/* AC low 	    */
+#define MD_SDIR_AX_SHFT		5			/* AC low	    */
 #define MD_SDIR_AX_MASK		(1 << 5)
 #define MD_SDIR_AX		(1 << 5)
-#define MD_SDIR_STATE_SHFT	7			/* AC low 	    */
+#define MD_SDIR_STATE_SHFT	7			/* AC low	    */
 #define MD_SDIR_STATE_MASK	(7 << 7)
-#define MD_SDIR_PTR_SHFT	10			/* C low 	    */
+#define MD_SDIR_PTR_SHFT	10			/* C low	    */
 #define MD_SDIR_PTR_MASK	(0x3f << 10)
-#define MD_SDIR_CWOFF_SHFT	5			/* C high 	    */
+#define MD_SDIR_CWOFF_SHFT	5			/* C high	    */
 #define MD_SDIR_CWOFF_MASK	(7 << 5)
-#define MD_SDIR_VECMSB_SHFT	11			/* A low 	    */
+#define MD_SDIR_VECMSB_SHFT	11			/* A low	    */
 #define MD_SDIR_VECMSB_BITMASK	0x1f
 #define MD_SDIR_VECMSB_BITSHFT	7
 #define MD_SDIR_VECMSB_MASK	(MD_SDIR_VECMSB_BITMASK << 11)
-#define MD_SDIR_VECLSB_SHFT	5			/* A high 	    */
+#define MD_SDIR_VECLSB_SHFT	5			/* A high	    */
 #define MD_SDIR_VECLSB_BITMASK	0x7ff
 #define MD_SDIR_VECLSB_BITSHFT	0
 #define MD_SDIR_VECLSB_MASK	(MD_SDIR_VECLSB_BITMASK << 5)
@@ -390,7 +390,7 @@
 
 /* Premium SIMM protection entry shifts and masks. */
 
-#define MD_PPROT_SHFT		0			/* Prot. field 	    */
+#define MD_PPROT_SHFT		0			/* Prot. field	    */
 #define MD_PPROT_MASK		7
 #define MD_PPROT_MIGMD_SHFT	3			/* Migration mode   */
 #define MD_PPROT_MIGMD_MASK	(3 << 3)
@@ -403,7 +403,7 @@
 
 /* Standard SIMM protection entry shifts and masks. */
 
-#define MD_SPROT_SHFT		0			/* Prot. field 	    */
+#define MD_SPROT_SHFT		0			/* Prot. field	    */
 #define MD_SPROT_MASK		7
 #define MD_SPROT_MIGMD_SHFT	3			/* Migration mode   */
 #define MD_SPROT_MIGMD_MASK	(3 << 3)
@@ -431,13 +431,13 @@
 
 #define CPU_LED_ADDR(_nasid, _slice)					   \
 	(private.p_sn00 ?						   \
-	 REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 +	((_slice) << 5)) :	   \
+	 REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 + ((_slice) << 5)) :	   \
 	 REMOTE_HUB_ADDR((_nasid), MD_LED0    + ((_slice) << 3)))
 
 #define SET_CPU_LEDS(_nasid, _slice,  _val)				   \
 	(HUB_S(CPU_LED_ADDR(_nasid, _slice), (_val)))
 
-#define SET_MY_LEDS(_v) 						   \
+#define SET_MY_LEDS(_v)							   \
 	SET_CPU_LEDS(get_nasid(), get_slice(), (_v))
 
 /*
@@ -541,7 +541,7 @@
  */
 
 struct dir_error_reg {
-	u64	uce_vld:   1,	/*    63: valid directory uce 	*/
+	u64	uce_vld:   1,	/*    63: valid directory uce	*/
 		ae_vld:	   1,	/*    62: valid dir prot ecc error */
 		ce_vld:	   1,	/*    61: valid correctable ECC err*/
 		rsvd1:	  19,	/* 60-42: reserved		*/
@@ -555,13 +555,13 @@
 };
 
 typedef union md_dir_error {
-	u64	derr_reg;	/* the entire register 		*/
+	u64	derr_reg;	/* the entire register		*/
 	struct dir_error_reg derr_fmt;	/* the register format		*/
 } md_dir_error_t;
 
 
 struct mem_error_reg {
-	u64	uce_vld:   1,	/*    63: valid memory uce 	*/
+	u64	uce_vld:   1,	/*    63: valid memory uce	*/
 		ce_vld:	   1,	/*    62: valid correctable ECC err*/
 		rsvd1:	  22,	/* 61-40: reserved		*/
 		bad_syn:   8,	/* 39-32: bad mem ecc syndrome	*/
@@ -573,8 +573,8 @@
 
 
 typedef union md_mem_error {
-	u64	merr_reg;	/* the entire register 		*/
-	struct mem_error_reg  merr_fmt; /* format of the mem_error reg  */
+	u64	merr_reg;	/* the entire register		*/
+	struct mem_error_reg  merr_fmt; /* format of the mem_error reg	*/
 } md_mem_error_t;
 
 
@@ -594,7 +594,7 @@
 };
 
 typedef union md_proto_error {
-	u64	perr_reg;	/* the entire register 		*/
+	u64	perr_reg;	/* the entire register		*/
 	struct proto_error_reg	perr_fmt; /* format of the register	*/
 } md_proto_error_t;
 
@@ -695,33 +695,33 @@
  *   represent directory memory information.
  */
 
-typedef	union	md_dir_high	{
-        md_sdir_high_t	md_sdir_high;
-        md_pdir_high_t	md_pdir_high;
+typedef union	md_dir_high	{
+	md_sdir_high_t	md_sdir_high;
+	md_pdir_high_t	md_pdir_high;
 } md_dir_high_t;
 
-typedef	union	md_dir_low	{
-        md_sdir_low_t	md_sdir_low;
-        md_pdir_low_t	md_pdir_low;
+typedef union	md_dir_low	{
+	md_sdir_low_t	md_sdir_low;
+	md_pdir_low_t	md_pdir_low;
 } md_dir_low_t;
 
-typedef	struct	bddir_entry	{
-        md_dir_low_t	md_dir_low;
-        md_dir_high_t	md_dir_high;
+typedef struct	bddir_entry	{
+	md_dir_low_t	md_dir_low;
+	md_dir_high_t	md_dir_high;
 } bddir_entry_t;
 
 typedef struct	dir_mem_entry	{
-        u64		prcpf[MAX_REGIONS];
-        bddir_entry_t	directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE];
+	u64		prcpf[MAX_REGIONS];
+	bddir_entry_t	directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE];
 } dir_mem_entry_t;
 
 
 
 typedef union md_perf_sel {
-	u64 	perf_sel_reg;
+	u64	perf_sel_reg;
 	struct	{
 		u64	perf_rsvd : 60,
-		        perf_en   :  1,
+			perf_en	  :  1,
 			perf_sel  :  3;
 	} perf_sel_bits;
 } md_perf_sel_t;
@@ -730,7 +730,7 @@
 	u64	perf_cnt;
 	struct	{
 		u64	perf_rsvd : 44,
-	                perf_cnt  : 20;
+			perf_cnt  : 20;
 	} perf_cnt_bits;
 } md_perf_cnt_t;
 
diff --git a/arch/mips/include/asm/sn/sn0/hubni.h b/arch/mips/include/asm/sn/sn0/hubni.h
index b40d3ef..b73c4be 100644
--- a/arch/mips/include/asm/sn/sn0/hubni.h
+++ b/arch/mips/include/asm/sn/sn0/hubni.h
@@ -25,38 +25,38 @@
 #define NI_BASE_TABLES		0x630000
 
 #define NI_STATUS_REV_ID	0x600000 /* Hub network status, rev, and ID */
-#define NI_PORT_RESET		0x600008 /* Reset the network interface     */
+#define NI_PORT_RESET		0x600008 /* Reset the network interface	    */
 #define NI_PROTECTION		0x600010 /* NI register access permissions  */
-#define NI_GLOBAL_PARMS		0x600018 /* LLP parameters 		    */
+#define NI_GLOBAL_PARMS		0x600018 /* LLP parameters		    */
 #define NI_SCRATCH_REG0		0x600100 /* Scratch register 0 (64 bits)    */
 #define NI_SCRATCH_REG1		0x600108 /* Scratch register 1 (64 bits)    */
 #define NI_DIAG_PARMS		0x600110 /* Parameters for diags	    */
 
 #define NI_VECTOR_PARMS		0x600200 /* Vector PIO routing parameters   */
-#define NI_VECTOR		0x600208 /* Vector PIO route 		    */
-#define NI_VECTOR_DATA		0x600210 /* Vector PIO data 		    */
-#define NI_VECTOR_STATUS	0x600300 /* Vector PIO return status 	    */
-#define NI_RETURN_VECTOR	0x600308 /* Vector PIO return vector 	    */
-#define NI_VECTOR_READ_DATA	0x600310 /* Vector PIO read data 	    */
+#define NI_VECTOR		0x600208 /* Vector PIO route		    */
+#define NI_VECTOR_DATA		0x600210 /* Vector PIO data		    */
+#define NI_VECTOR_STATUS	0x600300 /* Vector PIO return status	    */
+#define NI_RETURN_VECTOR	0x600308 /* Vector PIO return vector	    */
+#define NI_VECTOR_READ_DATA	0x600310 /* Vector PIO read data	    */
 #define NI_VECTOR_CLEAR		0x600380 /* Vector PIO read & clear status  */
 
-#define NI_IO_PROTECT		0x600400 /* PIO protection bits 	    */
-#define NI_IO_PROT_OVRRD	0x600408 /* PIO protection bit override     */
+#define NI_IO_PROTECT		0x600400 /* PIO protection bits		    */
+#define NI_IO_PROT_OVRRD	0x600408 /* PIO protection bit override	    */
 
-#define NI_AGE_CPU0_MEMORY	0x600500 /* CPU 0 memory age control 	    */
-#define NI_AGE_CPU0_PIO		0x600508 /* CPU 0 PIO age control 	    */
-#define NI_AGE_CPU1_MEMORY	0x600510 /* CPU 1 memory age control 	    */
-#define NI_AGE_CPU1_PIO		0x600518 /* CPU 1 PIO age control 	    */
-#define NI_AGE_GBR_MEMORY	0x600520 /* GBR memory age control 	    */
-#define NI_AGE_GBR_PIO		0x600528 /* GBR PIO age control 	    */
-#define NI_AGE_IO_MEMORY	0x600530 /* IO memory age control 	    */
-#define NI_AGE_IO_PIO		0x600538 /* IO PIO age control 		    */
+#define NI_AGE_CPU0_MEMORY	0x600500 /* CPU 0 memory age control	    */
+#define NI_AGE_CPU0_PIO		0x600508 /* CPU 0 PIO age control	    */
+#define NI_AGE_CPU1_MEMORY	0x600510 /* CPU 1 memory age control	    */
+#define NI_AGE_CPU1_PIO		0x600518 /* CPU 1 PIO age control	    */
+#define NI_AGE_GBR_MEMORY	0x600520 /* GBR memory age control	    */
+#define NI_AGE_GBR_PIO		0x600528 /* GBR PIO age control		    */
+#define NI_AGE_IO_MEMORY	0x600530 /* IO memory age control	    */
+#define NI_AGE_IO_PIO		0x600538 /* IO PIO age control		    */
 #define NI_AGE_REG_MIN		NI_AGE_CPU0_MEMORY
 #define NI_AGE_REG_MAX		NI_AGE_IO_PIO
 
-#define NI_PORT_PARMS		0x608000 /* LLP Parameters 		    */
-#define NI_PORT_ERROR		0x608008 /* LLP Errors 			    */
-#define NI_PORT_ERROR_CLEAR	0x608088 /* Clear the error bits 	    */
+#define NI_PORT_PARMS		0x608000 /* LLP Parameters		    */
+#define NI_PORT_ERROR		0x608008 /* LLP Errors			    */
+#define NI_PORT_ERROR_CLEAR	0x608088 /* Clear the error bits	    */
 
 #define NI_META_TABLE0		0x638000 /* First meta routing table entry  */
 #define NI_META_TABLE(_x)	(NI_META_TABLE0 + (8 * (_x)))
@@ -76,13 +76,13 @@
 #define NSRI_LINKUP_SHFT	29
 #define NSRI_LINKUP_MASK	(UINT64_CAST 0x1 << 29)
 #define NSRI_DOWNREASON_SHFT	28		/* 0=failed, 1=never came   */
-#define NSRI_DOWNREASON_MASK	(UINT64_CAST 0x1 << 28)	/*    out of reset. */
+#define NSRI_DOWNREASON_MASK	(UINT64_CAST 0x1 << 28) /*    out of reset. */
 #define NSRI_MORENODES_SHFT	18
 #define NSRI_MORENODES_MASK	(UINT64_CAST 1 << 18)	/* Max. # of nodes  */
 #define	 MORE_MEMORY		0
 #define	 MORE_NODES		1
 #define NSRI_REGIONSIZE_SHFT	17
-#define NSRI_REGIONSIZE_MASK	(UINT64_CAST 1 << 17)	/* Granularity 	    */
+#define NSRI_REGIONSIZE_MASK	(UINT64_CAST 1 << 17)	/* Granularity	    */
 #define	 REGIONSIZE_FINE	1
 #define	 REGIONSIZE_COARSE	0
 #define NSRI_NODEID_SHFT	8
@@ -90,14 +90,14 @@
 #define NSRI_REV_SHFT		4
 #define NSRI_REV_MASK		(UINT64_CAST 0xf << 4)	/* Chip Revision    */
 #define NSRI_CHIPID_SHFT	0
-#define NSRI_CHIPID_MASK	(UINT64_CAST 0xf)	/* Chip type ID     */
+#define NSRI_CHIPID_MASK	(UINT64_CAST 0xf)	/* Chip type ID	    */
 
 /*
- * In fine mode, each node is a region.  In coarse mode, there are
+ * In fine mode, each node is a region.	 In coarse mode, there are
  * eight nodes per region.
  */
 #define NASID_TO_FINEREG_SHFT	0
-#define NASID_TO_COARSEREG_SHFT	3
+#define NASID_TO_COARSEREG_SHFT 3
 
 /* NI_PORT_RESET mask definitions */
 
@@ -111,21 +111,21 @@
 
 /* NI_GLOBAL_PARMS mask and shift definitions */
 
-#define NGP_MAXRETRY_SHFT	48		/* Maximum retries  	    */
+#define NGP_MAXRETRY_SHFT	48		/* Maximum retries	    */
 #define NGP_MAXRETRY_MASK	(UINT64_CAST 0x3ff << 48)
-#define NGP_TAILTOWRAP_SHFT	32		/* Tail timeout wrap 	    */
+#define NGP_TAILTOWRAP_SHFT	32		/* Tail timeout wrap	    */
 #define NGP_TAILTOWRAP_MASK	(UINT64_CAST 0xffff << 32)
 
-#define NGP_CREDITTOVAL_SHFT	16		/* Tail timeout wrap 	    */
+#define NGP_CREDITTOVAL_SHFT	16		/* Tail timeout wrap	    */
 #define NGP_CREDITTOVAL_MASK	(UINT64_CAST 0xf << 16)
-#define NGP_TAILTOVAL_SHFT	4		/* Tail timeout value 	    */
+#define NGP_TAILTOVAL_SHFT	4		/* Tail timeout value	    */
 #define NGP_TAILTOVAL_MASK	(UINT64_CAST 0xf << 4)
 
 /* NI_DIAG_PARMS mask and shift definitions */
 
 #define NDP_PORTTORESET		(UINT64_CAST 1 << 18)	/* Port tmout reset */
 #define NDP_LLP8BITMODE		(UINT64_CAST 1 << 12)	/* LLP 8-bit mode   */
-#define NDP_PORTDISABLE		(UINT64_CAST 1 <<  6)	/* Port disable     */
+#define NDP_PORTDISABLE		(UINT64_CAST 1 <<  6)	/* Port disable	    */
 #define NDP_SENDERROR		(UINT64_CAST 1)		/* Send data error  */
 
 /*
@@ -137,7 +137,7 @@
 #define NVP_PIOID_MASK		(UINT64_CAST 0x3ff << 40)
 #define NVP_WRITEID_SHFT	32
 #define NVP_WRITEID_MASK	(UINT64_CAST 0xff << 32)
-#define NVP_ADDRESS_MASK	(UINT64_CAST 0xffff8)	/* Bits 19:3 	    */
+#define NVP_ADDRESS_MASK	(UINT64_CAST 0xffff8)	/* Bits 19:3	    */
 #define NVP_TYPE_SHFT		0
 #define NVP_TYPE_MASK		(UINT64_CAST 0x3)
 
@@ -151,7 +151,7 @@
 #define NVS_PIOID_MASK		(UINT64_CAST 0x3ff << 40)
 #define NVS_WRITEID_SHFT	32
 #define NVS_WRITEID_MASK	(UINT64_CAST 0xff << 32)
-#define NVS_ADDRESS_MASK	(UINT64_CAST 0xfffffff8)   /* Bits 31:3     */
+#define NVS_ADDRESS_MASK	(UINT64_CAST 0xfffffff8)   /* Bits 31:3	    */
 #define NVS_TYPE_SHFT		0
 #define NVS_TYPE_MASK		(UINT64_CAST 0x7)
 #define NVS_ERROR_MASK		(UINT64_CAST 0x4)  /* bit set means error */
@@ -161,10 +161,10 @@
 #define	 PIOTYPE_WRITE		1	/* VECTOR_PARMS and VECTOR_STATUS   */
 #define	 PIOTYPE_UNDEFINED	2	/* VECTOR_PARMS and VECTOR_STATUS   */
 #define	 PIOTYPE_EXCHANGE	3	/* VECTOR_PARMS and VECTOR_STATUS   */
-#define	 PIOTYPE_ADDR_ERR	4	/* VECTOR_STATUS only 		    */
-#define	 PIOTYPE_CMD_ERR	5	/* VECTOR_STATUS only 		    */
-#define	 PIOTYPE_PROT_ERR	6	/* VECTOR_STATUS only 		    */
-#define	 PIOTYPE_UNKNOWN	7	/* VECTOR_STATUS only 		    */
+#define	 PIOTYPE_ADDR_ERR	4	/* VECTOR_STATUS only		    */
+#define	 PIOTYPE_CMD_ERR	5	/* VECTOR_STATUS only		    */
+#define	 PIOTYPE_PROT_ERR	6	/* VECTOR_STATUS only		    */
+#define	 PIOTYPE_UNKNOWN	7	/* VECTOR_STATUS only		    */
 
 /* NI_AGE_XXX mask and shift definitions */
 
@@ -215,7 +215,7 @@
 
 #define NPE_FATAL_ERRORS	(NPE_LINKRESET | NPE_INTERNALERROR |	\
 				 NPE_BADMESSAGE | NPE_BADDEST |		\
-				 NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK |	\
+				 NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK | \
 				 NPE_TAILTO_MASK)
 
 /* NI_META_TABLE mask and shift definitions */
@@ -231,7 +231,7 @@
 typedef union	hubni_port_error_u {
 	u64	nipe_reg_value;
 	struct {
-	    u64	nipe_rsvd:	26,	/* unused */
+	    u64 nipe_rsvd:	26,	/* unused */
 		nipe_lnk_reset:	 1,	/* link reset */
 		nipe_intl_err:	 1,	/* internal error */
 		nipe_bad_msg:	 1,	/* bad message */
diff --git a/arch/mips/include/asm/sn/sn0/hubpi.h b/arch/mips/include/asm/sn/sn0/hubpi.h
index e39f5f9..7b83655 100644
--- a/arch/mips/include/asm/sn/sn0/hubpi.h
+++ b/arch/mips/include/asm/sn/sn0/hubpi.h
@@ -8,8 +8,8 @@
  * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
  * Copyright (C) 1999 by Ralf Baechle
  */
-#ifndef	_ASM_SN_SN0_HUBPI_H
-#define	_ASM_SN_SN0_HUBPI_H
+#ifndef _ASM_SN_SN0_HUBPI_H
+#define _ASM_SN_SN0_HUBPI_H
 
 #include <linux/types.h>
 
@@ -25,13 +25,13 @@
 
 /* General protection and control registers */
 
-#define PI_CPU_PROTECT		0x000000 /* CPU Protection 		    */
-#define PI_PROT_OVERRD		0x000008 /* Clear CPU Protection bit 	    */
-#define	PI_IO_PROTECT		0x000010 /* Interrupt Pending Protection    */
+#define PI_CPU_PROTECT		0x000000 /* CPU Protection		    */
+#define PI_PROT_OVERRD		0x000008 /* Clear CPU Protection bit	    */
+#define PI_IO_PROTECT		0x000010 /* Interrupt Pending Protection    */
 #define PI_REGION_PRESENT	0x000018 /* Indicates whether region exists */
-#define PI_CPU_NUM		0x000020 /* CPU Number ID 		    */
-#define PI_CALIAS_SIZE		0x000028 /* Cached Alias Size 		    */
-#define PI_MAX_CRB_TIMEOUT	0x000030 /* Maximum Timeout for CRB 	    */
+#define PI_CPU_NUM		0x000020 /* CPU Number ID		    */
+#define PI_CALIAS_SIZE		0x000028 /* Cached Alias Size		    */
+#define PI_MAX_CRB_TIMEOUT	0x000030 /* Maximum Timeout for CRB	    */
 #define PI_CRB_SFACTOR		0x000038 /* Scale factor for CRB timeout    */
 
 /* CALIAS values */
@@ -54,28 +54,28 @@
 
 /* Processor control and status checking */
 
-#define PI_CPU_PRESENT_A	0x000040 /* CPU Present A 		    */
-#define PI_CPU_PRESENT_B	0x000048 /* CPU Present B 		    */
-#define PI_CPU_ENABLE_A		0x000050 /* CPU Enable A 		    */
-#define PI_CPU_ENABLE_B		0x000058 /* CPU Enable B 		    */
-#define PI_REPLY_LEVEL		0x000060 /* Reply Level		 	    */
+#define PI_CPU_PRESENT_A	0x000040 /* CPU Present A		    */
+#define PI_CPU_PRESENT_B	0x000048 /* CPU Present B		    */
+#define PI_CPU_ENABLE_A		0x000050 /* CPU Enable A		    */
+#define PI_CPU_ENABLE_B		0x000058 /* CPU Enable B		    */
+#define PI_REPLY_LEVEL		0x000060 /* Reply Level			    */
 #define PI_HARDRESET_BIT	0x020068 /* Bit cleared by s/w on SR	    */
-#define PI_NMI_A		0x000070 /* NMI to CPU A 		    */
-#define PI_NMI_B		0x000078 /* NMI to CPU B 		    */
+#define PI_NMI_A		0x000070 /* NMI to CPU A		    */
+#define PI_NMI_B		0x000078 /* NMI to CPU B		    */
 #define PI_NMI_OFFSET		(PI_NMI_B - PI_NMI_A)
-#define PI_SOFTRESET		0x000080 /* Softreset (to both CPUs) 	    */
+#define PI_SOFTRESET		0x000080 /* Softreset (to both CPUs)	    */
 
-/* Regular Interrupt register checking.  */
+/* Regular Interrupt register checking.	 */
 
 #define PI_INT_PEND_MOD		0x000090 /* Write to set pending ints	    */
-#define PI_INT_PEND0		0x000098 /* Read to get pending ints 	    */
-#define PI_INT_PEND1		0x0000a0 /* Read to get pending ints 	    */
-#define PI_INT_MASK0_A		0x0000a8 /* Interrupt Mask 0 for CPU A 	    */
-#define PI_INT_MASK1_A		0x0000b0 /* Interrupt Mask 1 for CPU A 	    */
-#define PI_INT_MASK0_B		0x0000b8 /* Interrupt Mask 0 for CPU B 	    */
-#define PI_INT_MASK1_B		0x0000c0 /* Interrupt Mask 1 for CPU B 	    */
+#define PI_INT_PEND0		0x000098 /* Read to get pending ints	    */
+#define PI_INT_PEND1		0x0000a0 /* Read to get pending ints	    */
+#define PI_INT_MASK0_A		0x0000a8 /* Interrupt Mask 0 for CPU A	    */
+#define PI_INT_MASK1_A		0x0000b0 /* Interrupt Mask 1 for CPU A	    */
+#define PI_INT_MASK0_B		0x0000b8 /* Interrupt Mask 0 for CPU B	    */
+#define PI_INT_MASK1_B		0x0000c0 /* Interrupt Mask 1 for CPU B	    */
 
-#define PI_INT_MASK_OFFSET	0x10	 /* Offset from A to B 		    */
+#define PI_INT_MASK_OFFSET	0x10	 /* Offset from A to B		    */
 
 /* Crosscall interrupts */
 
@@ -83,49 +83,49 @@
 #define PI_CC_PEND_SET_B	0x0000d0 /* CC Interrupt Pending Set, CPU B */
 #define PI_CC_PEND_CLR_A	0x0000d8 /* CC Interrupt Pending Clr, CPU A */
 #define PI_CC_PEND_CLR_B	0x0000e0 /* CC Interrupt Pending Clr, CPU B */
-#define PI_CC_MASK		0x0000e8 /* CC Interrupt mask 		    */
+#define PI_CC_MASK		0x0000e8 /* CC Interrupt mask		    */
 
-#define PI_INT_SET_OFFSET	0x08	 /* Offset from A to B 		    */
+#define PI_INT_SET_OFFSET	0x08	 /* Offset from A to B		    */
 
 /* Realtime Counter and Profiler control registers */
 
-#define PI_RT_COUNT		0x030100 /* Real Time Counter 		    */
-#define PI_RT_COMPARE_A		0x000108 /* Real Time Compare A 	    */
-#define PI_RT_COMPARE_B		0x000110 /* Real Time Compare B 	    */
+#define PI_RT_COUNT		0x030100 /* Real Time Counter		    */
+#define PI_RT_COMPARE_A		0x000108 /* Real Time Compare A		    */
+#define PI_RT_COMPARE_B		0x000110 /* Real Time Compare B		    */
 #define PI_PROFILE_COMPARE	0x000118 /* L5 int to both cpus when == RTC */
-#define PI_RT_PEND_A		0x000120 /* Set if RT int for A pending     */
-#define PI_RT_PEND_B		0x000128 /* Set if RT int for B pending     */
+#define PI_RT_PEND_A		0x000120 /* Set if RT int for A pending	    */
+#define PI_RT_PEND_B		0x000128 /* Set if RT int for B pending	    */
 #define PI_PROF_PEND_A		0x000130 /* Set if Prof int for A pending   */
 #define PI_PROF_PEND_B		0x000138 /* Set if Prof int for B pending   */
-#define PI_RT_EN_A		0x000140 /* RT int for CPU A enable 	    */
-#define PI_RT_EN_B		0x000148 /* RT int for CPU B enable 	    */
-#define PI_PROF_EN_A		0x000150 /* PROF int for CPU A enable 	    */
-#define PI_PROF_EN_B		0x000158 /* PROF int for CPU B enable 	    */
-#define PI_RT_LOCAL_CTRL	0x000160 /* RT control register 	    */
+#define PI_RT_EN_A		0x000140 /* RT int for CPU A enable	    */
+#define PI_RT_EN_B		0x000148 /* RT int for CPU B enable	    */
+#define PI_PROF_EN_A		0x000150 /* PROF int for CPU A enable	    */
+#define PI_PROF_EN_B		0x000158 /* PROF int for CPU B enable	    */
+#define PI_RT_LOCAL_CTRL	0x000160 /* RT control register		    */
 #define PI_RT_FILTER_CTRL	0x000168 /* GCLK Filter control register    */
 
 #define PI_COUNT_OFFSET		0x08	 /* A to B offset for all counts    */
 
 /* Built-In Self Test support */
 
-#define PI_BIST_WRITE_DATA	0x000200 /* BIST write data 		    */
-#define PI_BIST_READ_DATA	0x000208 /* BIST read data 		    */
-#define PI_BIST_COUNT_TARG	0x000210 /* BIST Count and Target 	    */
-#define PI_BIST_READY		0x000218 /* BIST Ready indicator 	    */
-#define PI_BIST_SHIFT_LOAD	0x000220 /* BIST control 		    */
-#define PI_BIST_SHIFT_UNLOAD	0x000228 /* BIST control 		    */
-#define PI_BIST_ENTER_RUN	0x000230 /* BIST control 		    */
+#define PI_BIST_WRITE_DATA	0x000200 /* BIST write data		    */
+#define PI_BIST_READ_DATA	0x000208 /* BIST read data		    */
+#define PI_BIST_COUNT_TARG	0x000210 /* BIST Count and Target	    */
+#define PI_BIST_READY		0x000218 /* BIST Ready indicator	    */
+#define PI_BIST_SHIFT_LOAD	0x000220 /* BIST control		    */
+#define PI_BIST_SHIFT_UNLOAD	0x000228 /* BIST control		    */
+#define PI_BIST_ENTER_RUN	0x000230 /* BIST control		    */
 
 /* Graphics control registers */
 
-#define PI_GFX_PAGE_A		0x000300 /* Graphics page A 		    */
-#define PI_GFX_CREDIT_CNTR_A	0x000308 /* Graphics credit counter A 	    */
-#define PI_GFX_BIAS_A		0x000310 /* Graphics bias A 		    */
+#define PI_GFX_PAGE_A		0x000300 /* Graphics page A		    */
+#define PI_GFX_CREDIT_CNTR_A	0x000308 /* Graphics credit counter A	    */
+#define PI_GFX_BIAS_A		0x000310 /* Graphics bias A		    */
 #define PI_GFX_INT_CNTR_A	0x000318 /* Graphics interrupt counter A    */
 #define PI_GFX_INT_CMP_A	0x000320 /* Graphics interrupt comparator A */
-#define PI_GFX_PAGE_B		0x000328 /* Graphics page B 		    */
-#define PI_GFX_CREDIT_CNTR_B	0x000330 /* Graphics credit counter B 	    */
-#define PI_GFX_BIAS_B		0x000338 /* Graphics bias B 		    */
+#define PI_GFX_PAGE_B		0x000328 /* Graphics page B		    */
+#define PI_GFX_CREDIT_CNTR_B	0x000330 /* Graphics credit counter B	    */
+#define PI_GFX_BIAS_B		0x000338 /* Graphics bias B		    */
 #define PI_GFX_INT_CNTR_B	0x000340 /* Graphics interrupt counter B    */
 #define PI_GFX_INT_CMP_B	0x000348 /* Graphics interrupt comparator B */
 
@@ -138,24 +138,24 @@
 #define PI_ERR_INT_MASK_B	0x000410 /* Error Interrupt mask for CPU B  */
 #define PI_ERR_STACK_ADDR_A	0x000418 /* Error stack address for CPU A   */
 #define PI_ERR_STACK_ADDR_B	0x000420 /* Error stack address for CPU B   */
-#define PI_ERR_STACK_SIZE	0x000428 /* Error Stack Size 		    */
-#define PI_ERR_STATUS0_A	0x000430 /* Error Status 0A 		    */
+#define PI_ERR_STACK_SIZE	0x000428 /* Error Stack Size		    */
+#define PI_ERR_STATUS0_A	0x000430 /* Error Status 0A		    */
 #define PI_ERR_STATUS0_A_RCLR	0x000438 /* Error Status 0A clear on read   */
-#define PI_ERR_STATUS1_A	0x000440 /* Error Status 1A 		    */
+#define PI_ERR_STATUS1_A	0x000440 /* Error Status 1A		    */
 #define PI_ERR_STATUS1_A_RCLR	0x000448 /* Error Status 1A clear on read   */
-#define PI_ERR_STATUS0_B	0x000450 /* Error Status 0B 		    */
+#define PI_ERR_STATUS0_B	0x000450 /* Error Status 0B		    */
 #define PI_ERR_STATUS0_B_RCLR	0x000458 /* Error Status 0B clear on read   */
-#define PI_ERR_STATUS1_B	0x000460 /* Error Status 1B 		    */
+#define PI_ERR_STATUS1_B	0x000460 /* Error Status 1B		    */
 #define PI_ERR_STATUS1_B_RCLR	0x000468 /* Error Status 1B clear on read   */
-#define PI_SPOOL_CMP_A		0x000470 /* Spool compare for CPU A 	    */
-#define PI_SPOOL_CMP_B		0x000478 /* Spool compare for CPU B 	    */
-#define PI_CRB_TIMEOUT_A	0x000480 /* Timed out CRB entries for A     */
-#define PI_CRB_TIMEOUT_B	0x000488 /* Timed out CRB entries for B     */
+#define PI_SPOOL_CMP_A		0x000470 /* Spool compare for CPU A	    */
+#define PI_SPOOL_CMP_B		0x000478 /* Spool compare for CPU B	    */
+#define PI_CRB_TIMEOUT_A	0x000480 /* Timed out CRB entries for A	    */
+#define PI_CRB_TIMEOUT_B	0x000488 /* Timed out CRB entries for B	    */
 #define PI_SYSAD_ERRCHK_EN	0x000490 /* Enables SYSAD error checking    */
-#define PI_BAD_CHECK_BIT_A	0x000498 /* Force SYSAD check bit error     */
-#define PI_BAD_CHECK_BIT_B	0x0004a0 /* Force SYSAD check bit error     */
-#define PI_NACK_CNT_A		0x0004a8 /* Consecutive NACK counter 	    */
-#define PI_NACK_CNT_B		0x0004b0 /* 	"	" for CPU B 	    */
+#define PI_BAD_CHECK_BIT_A	0x000498 /* Force SYSAD check bit error	    */
+#define PI_BAD_CHECK_BIT_B	0x0004a0 /* Force SYSAD check bit error	    */
+#define PI_NACK_CNT_A		0x0004a8 /* Consecutive NACK counter	    */
+#define PI_NACK_CNT_B		0x0004b0 /*	"	" for CPU B	    */
 #define PI_NACK_CMP		0x0004b8 /* NACK count compare		    */
 #define PI_STACKADDR_OFFSET	(PI_ERR_STACK_ADDR_B - PI_ERR_STACK_ADDR_A)
 #define PI_ERRSTAT_OFFSET	(PI_ERR_STATUS0_B - PI_ERR_STATUS0_A)
@@ -168,7 +168,7 @@
 #define PI_ERR_SPUR_MSG_A	0x00000008
 #define PI_ERR_WRB_TERR_B	0x00000010	/* WRB TERR		    */
 #define PI_ERR_WRB_TERR_A	0x00000020
-#define PI_ERR_WRB_WERR_B	0x00000040	/* WRB WERR 		    */
+#define PI_ERR_WRB_WERR_B	0x00000040	/* WRB WERR		    */
 #define PI_ERR_WRB_WERR_A	0x00000080
 #define PI_ERR_SYSSTATE_B	0x00000100	/* SysState parity error    */
 #define PI_ERR_SYSSTATE_A	0x00000200
@@ -196,32 +196,32 @@
  * The following three macros define all possible error int pends.
  */
 
-#define PI_FATAL_ERR_CPU_A	(PI_ERR_SYSSTATE_TAG_A 	| \
-				 PI_ERR_BAD_SPOOL_A 	| \
-				 PI_ERR_SYSCMD_ADDR_A 	| \
-				 PI_ERR_SYSCMD_DATA_A 	| \
-				 PI_ERR_SYSAD_ADDR_A 	| \
+#define PI_FATAL_ERR_CPU_A	(PI_ERR_SYSSTATE_TAG_A	| \
+				 PI_ERR_BAD_SPOOL_A	| \
+				 PI_ERR_SYSCMD_ADDR_A	| \
+				 PI_ERR_SYSCMD_DATA_A	| \
+				 PI_ERR_SYSAD_ADDR_A	| \
 				 PI_ERR_SYSAD_DATA_A	| \
 				 PI_ERR_SYSSTATE_A)
 
-#define PI_MISC_ERR_CPU_A	(PI_ERR_UNCAC_UNCORR_A 	| \
-				 PI_ERR_WRB_WERR_A 	| \
-				 PI_ERR_WRB_TERR_A 	| \
-				 PI_ERR_SPUR_MSG_A 	| \
+#define PI_MISC_ERR_CPU_A	(PI_ERR_UNCAC_UNCORR_A	| \
+				 PI_ERR_WRB_WERR_A	| \
+				 PI_ERR_WRB_TERR_A	| \
+				 PI_ERR_SPUR_MSG_A	| \
 				 PI_ERR_SPOOL_CMP_A)
 
-#define PI_FATAL_ERR_CPU_B	(PI_ERR_SYSSTATE_TAG_B 	| \
-				 PI_ERR_BAD_SPOOL_B 	| \
-				 PI_ERR_SYSCMD_ADDR_B 	| \
-				 PI_ERR_SYSCMD_DATA_B 	| \
-				 PI_ERR_SYSAD_ADDR_B 	| \
+#define PI_FATAL_ERR_CPU_B	(PI_ERR_SYSSTATE_TAG_B	| \
+				 PI_ERR_BAD_SPOOL_B	| \
+				 PI_ERR_SYSCMD_ADDR_B	| \
+				 PI_ERR_SYSCMD_DATA_B	| \
+				 PI_ERR_SYSAD_ADDR_B	| \
 				 PI_ERR_SYSAD_DATA_B	| \
 				 PI_ERR_SYSSTATE_B)
 
-#define PI_MISC_ERR_CPU_B 	(PI_ERR_UNCAC_UNCORR_B  | \
-				 PI_ERR_WRB_WERR_B 	| \
-				 PI_ERR_WRB_TERR_B 	| \
-				 PI_ERR_SPUR_MSG_B 	| \
+#define PI_MISC_ERR_CPU_B	(PI_ERR_UNCAC_UNCORR_B	| \
+				 PI_ERR_WRB_WERR_B	| \
+				 PI_ERR_WRB_TERR_B	| \
+				 PI_ERR_SPUR_MSG_B	| \
 				 PI_ERR_SPOOL_CMP_B)
 
 #define PI_ERR_GENERIC	(PI_ERR_MD_UNCORR)
@@ -242,24 +242,24 @@
 #define PI_ERR_ST0_CMD_SHFT	17
 #define PI_ERR_ST0_ADDR_MASK	0x3ffffffffe000000
 #define PI_ERR_ST0_ADDR_SHFT	25
-#define PI_ERR_ST0_OVERRUN_MASK	0x4000000000000000
-#define PI_ERR_ST0_OVERRUN_SHFT	62
+#define PI_ERR_ST0_OVERRUN_MASK 0x4000000000000000
+#define PI_ERR_ST0_OVERRUN_SHFT 62
 #define PI_ERR_ST0_VALID_MASK	0x8000000000000000
 #define PI_ERR_ST0_VALID_SHFT	63
 
 /* Fields in PI_ERR_STATUS1_[AB] */
 #define PI_ERR_ST1_SPOOL_MASK	0x00000000001fffff
 #define PI_ERR_ST1_SPOOL_SHFT	0
-#define PI_ERR_ST1_TOUTCNT_MASK	0x000000001fe00000
-#define PI_ERR_ST1_TOUTCNT_SHFT	21
+#define PI_ERR_ST1_TOUTCNT_MASK 0x000000001fe00000
+#define PI_ERR_ST1_TOUTCNT_SHFT 21
 #define PI_ERR_ST1_INVCNT_MASK	0x0000007fe0000000
 #define PI_ERR_ST1_INVCNT_SHFT	29
 #define PI_ERR_ST1_CRBNUM_MASK	0x0000038000000000
 #define PI_ERR_ST1_CRBNUM_SHFT	39
 #define PI_ERR_ST1_WRBRRB_MASK	0x0000040000000000
 #define PI_ERR_ST1_WRBRRB_SHFT	42
-#define PI_ERR_ST1_CRBSTAT_MASK	0x001ff80000000000
-#define PI_ERR_ST1_CRBSTAT_SHFT	43
+#define PI_ERR_ST1_CRBSTAT_MASK 0x001ff80000000000
+#define PI_ERR_ST1_CRBSTAT_SHFT 43
 #define PI_ERR_ST1_MSGSRC_MASK	0xffe0000000000000
 #define PI_ERR_ST1_MSGSRC_SHFT	53
 
@@ -274,8 +274,8 @@
 #define PI_ERR_STK_CRBNUM_SHFT	9
 #define PI_ERR_STK_WRBRRB_MASK	0x0000000000001000
 #define PI_ERR_STK_WRBRRB_SHFT	12
-#define PI_ERR_STK_CRBSTAT_MASK	0x00000000007fe000
-#define PI_ERR_STK_CRBSTAT_SHFT	13
+#define PI_ERR_STK_CRBSTAT_MASK 0x00000000007fe000
+#define PI_ERR_STK_CRBSTAT_SHFT 13
 #define PI_ERR_STK_CMD_MASK	0x000000007f800000
 #define PI_ERR_STK_CMD_SHFT	23
 #define PI_ERR_STK_ADDR_MASK	0xffffffff80000000
@@ -364,11 +364,11 @@
 
 /* Bits in PI_SYSAD_ERRCHK_EN */
 #define PI_SYSAD_ERRCHK_ECCGEN	0x01	/* Enable ECC generation	    */
-#define PI_SYSAD_ERRCHK_QUALGEN	0x02	/* Enable data quality signal gen.  */
-#define PI_SYSAD_ERRCHK_SADP	0x04	/* Enable SysAD parity checking     */
+#define PI_SYSAD_ERRCHK_QUALGEN 0x02	/* Enable data quality signal gen.  */
+#define PI_SYSAD_ERRCHK_SADP	0x04	/* Enable SysAD parity checking	    */
 #define PI_SYSAD_ERRCHK_CMDP	0x08	/* Enable SysCmd parity checking    */
 #define PI_SYSAD_ERRCHK_STATE	0x10	/* Enable SysState parity checking  */
-#define PI_SYSAD_ERRCHK_QUAL	0x20	/* Enable data quality checking     */
+#define PI_SYSAD_ERRCHK_QUAL	0x20	/* Enable data quality checking	    */
 #define PI_SYSAD_CHECK_ALL	0x3f	/* Generate and check all signals.  */
 
 /* Interrupt pending bits on R10000 */
diff --git a/arch/mips/include/asm/sn/sn0/ip27.h b/arch/mips/include/asm/sn/sn0/ip27.h
index 3c97e08..3b5efee 100644
--- a/arch/mips/include/asm/sn/sn0/ip27.h
+++ b/arch/mips/include/asm/sn/sn0/ip27.h
@@ -21,14 +21,14 @@
 
 #ifndef __ASSEMBLY__
 
-#define CAUSE_BERRINTR 		IE_IRQ5
+#define CAUSE_BERRINTR		IE_IRQ5
 
-#define ECCF_CACHE_ERR  0
-#define ECCF_TAGLO      1
-#define ECCF_ECC        2
-#define ECCF_ERROREPC   3
-#define ECCF_PADDR      4
-#define ECCF_SIZE       (5 * sizeof(long))
+#define ECCF_CACHE_ERR	0
+#define ECCF_TAGLO	1
+#define ECCF_ECC	2
+#define ECCF_ERROREPC	3
+#define ECCF_PADDR	4
+#define ECCF_SIZE	(5 * sizeof(long))
 
 #endif /* !__ASSEMBLY__ */
 
@@ -39,8 +39,8 @@
  * the processor number of the calling processor.  The proc parameters
  * must be a register.
  */
-#define KL_GET_CPUNUM(proc) 				\
-	dli	proc, LOCAL_HUB(0); 			\
+#define KL_GET_CPUNUM(proc)				\
+	dli	proc, LOCAL_HUB(0);			\
 	ld	proc, PI_CPU_NUM(proc)
 
 #endif /* __ASSEMBLY__ */
@@ -71,15 +71,15 @@
 
 #define NUM_CAUSE_INTRS		8
 
-#define SCACHE_LINESIZE	128
-#define SCACHE_LINEMASK	(SCACHE_LINESIZE - 1)
+#define SCACHE_LINESIZE 128
+#define SCACHE_LINEMASK (SCACHE_LINESIZE - 1)
 
 #include <asm/sn/addrs.h>
 
-#define LED_CYCLE_MASK  0x0f
-#define LED_CYCLE_SHFT  4
+#define LED_CYCLE_MASK	0x0f
+#define LED_CYCLE_SHFT	4
 
 #define SEND_NMI(_nasid, _slice)	\
-          REMOTE_HUB_S((_nasid),  (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1)
+	  REMOTE_HUB_S((_nasid),  (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1)
 
 #endif /* _ASM_SN_SN0_IP27_H */
diff --git a/arch/mips/include/asm/sn/types.h b/arch/mips/include/asm/sn/types.h
index 74d0bb2..c4813d6 100644
--- a/arch/mips/include/asm/sn/types.h
+++ b/arch/mips/include/asm/sn/types.h
@@ -11,7 +11,7 @@
 
 #include <linux/types.h>
 
-typedef unsigned long 	cpuid_t;
+typedef unsigned long	cpuid_t;
 typedef unsigned long	cnodemask_t;
 typedef signed short	nasid_t;	/* node id in numa-as-id space */
 typedef signed short	cnodeid_t;	/* node id in compact-id space */
@@ -19,7 +19,7 @@
 typedef signed short	moduleid_t;	/* user-visible module number type */
 typedef signed short	cmoduleid_t;	/* kernel compact module id type */
 typedef unsigned char	clusterid_t;	/* Clusterid of the cell */
-typedef unsigned long 	pfn_t;
+typedef unsigned long	pfn_t;
 
 typedef dev_t		vertex_hdl_t;	/* hardware graph vertex handle */
 
diff --git a/arch/mips/include/asm/sni.h b/arch/mips/include/asm/sni.h
index 8c1eb02..a107201 100644
--- a/arch/mips/include/asm/sni.h
+++ b/arch/mips/include/asm/sni.h
@@ -13,27 +13,27 @@
 
 extern unsigned int sni_brd_type;
 
-#define SNI_BRD_10                 2
-#define SNI_BRD_10NEW              3
-#define SNI_BRD_TOWER_OASIC        4
-#define SNI_BRD_MINITOWER          5
-#define SNI_BRD_PCI_TOWER          6
-#define SNI_BRD_RM200              7
-#define SNI_BRD_PCI_MTOWER         8
-#define SNI_BRD_PCI_DESKTOP        9
-#define SNI_BRD_PCI_TOWER_CPLUS   10
+#define SNI_BRD_10		   2
+#define SNI_BRD_10NEW		   3
+#define SNI_BRD_TOWER_OASIC	   4
+#define SNI_BRD_MINITOWER	   5
+#define SNI_BRD_PCI_TOWER	   6
+#define SNI_BRD_RM200		   7
+#define SNI_BRD_PCI_MTOWER	   8
+#define SNI_BRD_PCI_DESKTOP	   9
+#define SNI_BRD_PCI_TOWER_CPLUS	  10
 #define SNI_BRD_PCI_MTOWER_CPLUS  11
 
 /* RM400 cpu types */
-#define SNI_CPU_M8021           0x01
-#define SNI_CPU_M8030           0x04
-#define SNI_CPU_M8031           0x06
-#define SNI_CPU_M8034           0x0f
-#define SNI_CPU_M8037           0x07
-#define SNI_CPU_M8040           0x05
-#define SNI_CPU_M8043           0x09
-#define SNI_CPU_M8050           0x0b
-#define SNI_CPU_M8053           0x0d
+#define SNI_CPU_M8021		0x01
+#define SNI_CPU_M8030		0x04
+#define SNI_CPU_M8031		0x06
+#define SNI_CPU_M8034		0x0f
+#define SNI_CPU_M8037		0x07
+#define SNI_CPU_M8040		0x05
+#define SNI_CPU_M8043		0x09
+#define SNI_CPU_M8050		0x0b
+#define SNI_CPU_M8053		0x0d
 
 #define SNI_PORT_BASE		CKSEG1ADDR(0xb4000000)
 
@@ -52,14 +52,14 @@
 #define PCIMT_ERRADDR		CKSEG1ADDR(0xbfff0044)
 #define PCIMT_SYNDROME		CKSEG1ADDR(0xbfff004c)
 #define PCIMT_ITPEND		CKSEG1ADDR(0xbfff0054)
-#define  IT_INT2		0x01
-#define  IT_INTD		0x02
-#define  IT_INTC		0x04
-#define  IT_INTB		0x08
-#define  IT_INTA		0x10
-#define  IT_EISA		0x20
-#define  IT_SCSI		0x40
-#define  IT_ETH			0x80
+#define	 IT_INT2		0x01
+#define	 IT_INTD		0x02
+#define	 IT_INTC		0x04
+#define	 IT_INTB		0x08
+#define	 IT_INTA		0x10
+#define	 IT_EISA		0x20
+#define	 IT_SCSI		0x40
+#define	 IT_ETH			0x80
 #define PCIMT_IRQSEL		CKSEG1ADDR(0xbfff005c)
 #define PCIMT_TESTMEM		CKSEG1ADDR(0xbfff0064)
 #define PCIMT_ECCREG		CKSEG1ADDR(0xbfff006c)
@@ -86,14 +86,14 @@
 #define PCIMT_ERRADDR		CKSEG1ADDR(0xbfff0040)
 #define PCIMT_SYNDROME		CKSEG1ADDR(0xbfff0048)
 #define PCIMT_ITPEND		CKSEG1ADDR(0xbfff0050)
-#define  IT_INT2		0x01
-#define  IT_INTD		0x02
-#define  IT_INTC		0x04
-#define  IT_INTB		0x08
-#define  IT_INTA		0x10
-#define  IT_EISA		0x20
-#define  IT_SCSI		0x40
-#define  IT_ETH			0x80
+#define	 IT_INT2		0x01
+#define	 IT_INTD		0x02
+#define	 IT_INTC		0x04
+#define	 IT_INTB		0x08
+#define	 IT_INTA		0x10
+#define	 IT_EISA		0x20
+#define	 IT_SCSI		0x40
+#define	 IT_ETH			0x80
 #define PCIMT_IRQSEL		CKSEG1ADDR(0xbfff0058)
 #define PCIMT_TESTMEM		CKSEG1ADDR(0xbfff0060)
 #define PCIMT_ECCREG		CKSEG1ADDR(0xbfff0068)
@@ -137,29 +137,29 @@
 /*
  * A20R based boards
  */
-#define A20R_PT_CLOCK_BASE      CKSEG1ADDR(0xbc040000)
-#define A20R_PT_TIM0_ACK        CKSEG1ADDR(0xbc050000)
-#define A20R_PT_TIM1_ACK        CKSEG1ADDR(0xbc060000)
+#define A20R_PT_CLOCK_BASE	CKSEG1ADDR(0xbc040000)
+#define A20R_PT_TIM0_ACK	CKSEG1ADDR(0xbc050000)
+#define A20R_PT_TIM1_ACK	CKSEG1ADDR(0xbc060000)
 
-#define SNI_A20R_IRQ_BASE       MIPS_CPU_IRQ_BASE
-#define SNI_A20R_IRQ_TIMER      (SNI_A20R_IRQ_BASE+5)
+#define SNI_A20R_IRQ_BASE	MIPS_CPU_IRQ_BASE
+#define SNI_A20R_IRQ_TIMER	(SNI_A20R_IRQ_BASE+5)
 
-#define SNI_PCIT_INT_REG        CKSEG1ADDR(0xbfff000c)
+#define SNI_PCIT_INT_REG	CKSEG1ADDR(0xbfff000c)
 
-#define SNI_PCIT_INT_START      24
-#define SNI_PCIT_INT_END        30
+#define SNI_PCIT_INT_START	24
+#define SNI_PCIT_INT_END	30
 
-#define PCIT_IRQ_ETHERNET       (MIPS_CPU_IRQ_BASE + 5)
-#define PCIT_IRQ_INTA           (SNI_PCIT_INT_START + 0)
-#define PCIT_IRQ_INTB           (SNI_PCIT_INT_START + 1)
-#define PCIT_IRQ_INTC           (SNI_PCIT_INT_START + 2)
-#define PCIT_IRQ_INTD           (SNI_PCIT_INT_START + 3)
-#define PCIT_IRQ_SCSI0          (SNI_PCIT_INT_START + 4)
-#define PCIT_IRQ_SCSI1          (SNI_PCIT_INT_START + 5)
+#define PCIT_IRQ_ETHERNET	(MIPS_CPU_IRQ_BASE + 5)
+#define PCIT_IRQ_INTA		(SNI_PCIT_INT_START + 0)
+#define PCIT_IRQ_INTB		(SNI_PCIT_INT_START + 1)
+#define PCIT_IRQ_INTC		(SNI_PCIT_INT_START + 2)
+#define PCIT_IRQ_INTD		(SNI_PCIT_INT_START + 3)
+#define PCIT_IRQ_SCSI0		(SNI_PCIT_INT_START + 4)
+#define PCIT_IRQ_SCSI1		(SNI_PCIT_INT_START + 5)
 
 
 /*
- * Interrupt 0-16 are EISA interrupts.  Interrupts from 16 on are assigned
+ * Interrupt 0-16 are EISA interrupts.	Interrupts from 16 on are assigned
  * to the other interrupts generated by ASIC PCI.
  *
  * INT2 is a wired-or of the push button interrupt, high temperature interrupt
@@ -204,12 +204,12 @@
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
 #define __SNI_END 3
 #endif
-#define SNI_IDPROM_BASE        CKSEG1ADDR(0x1ff00000)
+#define SNI_IDPROM_BASE	       CKSEG1ADDR(0x1ff00000)
 #define SNI_IDPROM_MEMSIZE     (SNI_IDPROM_BASE + (0x28 ^ __SNI_END))
 #define SNI_IDPROM_BRDTYPE     (SNI_IDPROM_BASE + (0x29 ^ __SNI_END))
 #define SNI_IDPROM_CPUTYPE     (SNI_IDPROM_BASE + (0x30 ^ __SNI_END))
 
-#define SNI_IDPROM_SIZE	0x1000
+#define SNI_IDPROM_SIZE 0x1000
 
 /* board specific init functions */
 extern void sni_a20r_init(void);
diff --git a/arch/mips/include/asm/sparsemem.h b/arch/mips/include/asm/sparsemem.h
index 65900da..d2da53c 100644
--- a/arch/mips/include/asm/sparsemem.h
+++ b/arch/mips/include/asm/sparsemem.h
@@ -11,7 +11,7 @@
 #else
 # define SECTION_SIZE_BITS	28
 #endif
-#define MAX_PHYSMEM_BITS        35
+#define MAX_PHYSMEM_BITS	35
 
 #endif /* CONFIG_SPARSEMEM */
 #endif /* _MIPS_SPARSEMEM_H */
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index ca61e84..5130c88 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -17,7 +17,7 @@
 /*
  * Your basic SMP spinlocks, allowing only a single CPU anywhere
  *
- * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * Simple spin lock operations.	 There are two variants, one clears IRQ's
  * on the local processor, one does not.
  *
  * These are fair FIFO ticket locks
@@ -222,7 +222,7 @@
  * write_can_lock - would write_trylock() succeed?
  * @lock: the rwlock in question.
  */
-#define arch_write_can_lock(rw)	(!(rw)->lock)
+#define arch_write_can_lock(rw) (!(rw)->lock)
 
 static inline void arch_read_lock(arch_rwlock_t *rw)
 {
diff --git a/arch/mips/include/asm/spinlock_types.h b/arch/mips/include/asm/spinlock_types.h
index c52f360..9b2528e 100644
--- a/arch/mips/include/asm/spinlock_types.h
+++ b/arch/mips/include/asm/spinlock_types.h
@@ -11,7 +11,7 @@
 
 typedef union {
 	/*
-	 * bits  0..15 : serving_now
+	 * bits	 0..15 : serving_now
 	 * bits 16..31 : ticket
 	 */
 	u32 lock;
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index cb41af5..c993840 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -218,17 +218,17 @@
 		ori	$28, sp, _THREAD_MASK
 		xori	$28, _THREAD_MASK
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
-		.set    mips64
-		pref    0, 0($28)       /* Prefetch the current pointer */
-		pref    0, PT_R31(sp)   /* Prefetch the $31(ra) */
+		.set	mips64
+		pref	0, 0($28)	/* Prefetch the current pointer */
+		pref	0, PT_R31(sp)	/* Prefetch the $31(ra) */
 		/* The Octeon multiplier state is affected by general multiply
 		    instructions. It must be saved before and kernel code might
 		    corrupt it */
-		jal     octeon_mult_save
-		LONG_L  v1, 0($28)  /* Load the current pointer */
+		jal	octeon_mult_save
+		LONG_L	v1, 0($28)  /* Load the current pointer */
 			 /* Restore $31(ra) that was changed by the jal */
-		LONG_L  ra, PT_R31(sp)
-		pref    0, 0(v1)    /* Prefetch the current thread */
+		LONG_L	ra, PT_R31(sp)
+		pref	0, 0(v1)    /* Prefetch the current thread */
 #endif
 		.set	pop
 		.endm
diff --git a/arch/mips/include/asm/string.h b/arch/mips/include/asm/string.h
index 436e3ad..29030cb 100644
--- a/arch/mips/include/asm/string.h
+++ b/arch/mips/include/asm/string.h
@@ -35,7 +35,7 @@
 	".set\tat\n\t"
 	".set\treorder"
 	: "=r" (__dest), "=r" (__src)
-        : "0" (__dest), "1" (__src)
+	: "0" (__dest), "1" (__src)
 	: "memory");
 
   return __xdest;
@@ -62,9 +62,9 @@
 	"2:\n\t"
 	".set\tat\n\t"
 	".set\treorder"
-        : "=r" (__dest), "=r" (__src), "=r" (__n)
-        : "0" (__dest), "1" (__src), "2" (__n)
-        : "memory");
+	: "=r" (__dest), "=r" (__src), "=r" (__n)
+	: "0" (__dest), "1" (__src), "2" (__n)
+	: "memory");
 
   return __xdest;
 }
diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h
index 4f8ddba8..fd16bcb 100644
--- a/arch/mips/include/asm/switch_to.h
+++ b/arch/mips/include/asm/switch_to.h
@@ -30,7 +30,7 @@
 #ifdef CONFIG_MIPS_MT_FPAFF
 
 /*
- * Handle the scheduler resume end of FPU affinity management.  We do this
+ * Handle the scheduler resume end of FPU affinity management.	We do this
  * inline to try to keep the overhead down. If we have been forced to run on
  * a "CPU" with an FPU because of a previous high level of FP computation,
  * but did not actually use the FPU during the most recent time-slice (CU1
@@ -72,7 +72,7 @@
 		__save_dsp(prev);					\
 	__clear_software_ll_bit();					\
 	__usedfpu = test_and_clear_tsk_thread_flag(prev, TIF_USEDFPU);	\
-	(last) = resume(prev, next, task_thread_info(next), __usedfpu);	\
+	(last) = resume(prev, next, task_thread_info(next), __usedfpu); \
 } while (0)
 
 #define finish_arch_switch(prev)					\
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index b2050b9..178f792 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -44,7 +44,7 @@
 #define INIT_THREAD_INFO(tsk)			\
 {						\
 	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
+	.exec_domain	= &default_exec_domain, \
 	.flags		= _TIF_FIXADE,		\
 	.cpu		= 0,			\
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index 761f2e92..debc800 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -6,8 +6,8 @@
  * include/asm-mips/time.h
  *     header file for the new style time.c file and time services.
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -75,7 +75,7 @@
 
 static inline int init_mips_clocksource(void)
 {
-#ifdef CONFIG_CSRC_R4K
+#if defined(CONFIG_CSRC_R4K) && !defined(CONFIG_CSRC_GIC)
 	return init_r4k_clocksource();
 #else
 	return 0;
diff --git a/arch/mips/include/asm/tlb.h b/arch/mips/include/asm/tlb.h
index 80d9dfc..c67842b 100644
--- a/arch/mips/include/asm/tlb.h
+++ b/arch/mips/include/asm/tlb.h
@@ -5,7 +5,7 @@
  * MIPS doesn't need any special per-pte or per-vma handling, except
  * we need to flush cache for area to be unmapped.
  */
-#define tlb_start_vma(tlb, vma) 				\
+#define tlb_start_vma(tlb, vma)					\
 	do {							\
 		if (!tlb->fullmm)				\
 			flush_cache_range(vma, vma->vm_start, vma->vm_end); \
diff --git a/arch/mips/include/asm/topology.h b/arch/mips/include/asm/topology.h
index 259145e..12609a1 100644
--- a/arch/mips/include/asm/topology.h
+++ b/arch/mips/include/asm/topology.h
@@ -11,7 +11,7 @@
 #include <topology.h>
 
 #ifdef CONFIG_SMP
-#define smt_capable()   (smp_num_siblings > 1)
+#define smt_capable()	(smp_num_siblings > 1)
 #endif
 
 #endif /* __ASM_TOPOLOGY_H */
diff --git a/arch/mips/include/asm/traps.h b/arch/mips/include/asm/traps.h
index 420ca06..f41cf3e 100644
--- a/arch/mips/include/asm/traps.h
+++ b/arch/mips/include/asm/traps.h
@@ -14,7 +14,7 @@
 /*
  * Possible status responses for a board_be_handler backend.
  */
-#define MIPS_BE_DISCARD	0		/* return with no action */
+#define MIPS_BE_DISCARD 0		/* return with no action */
 #define MIPS_BE_FIXUP	1		/* return to the fixup code */
 #define MIPS_BE_FATAL	2		/* treat as an unrecoverable error */
 
diff --git a/arch/mips/include/asm/txx9/jmr3927.h b/arch/mips/include/asm/txx9/jmr3927.h
index 8808d7f..aab959d 100644
--- a/arch/mips/include/asm/txx9/jmr3927.h
+++ b/arch/mips/include/asm/txx9/jmr3927.h
@@ -40,7 +40,7 @@
 #define JMR3927_PCIIO_BASE	(KSEG1 + JMR3927_PCIIO)
 
 #define JMR3927_IOC_REV_ADDR	(JMR3927_IOC_BASE + 0x00000000)
-#define JMR3927_IOC_NVRAMB_ADDR	(JMR3927_IOC_BASE + 0x00010000)
+#define JMR3927_IOC_NVRAMB_ADDR (JMR3927_IOC_BASE + 0x00010000)
 #define JMR3927_IOC_LED_ADDR	(JMR3927_IOC_BASE + 0x00020000)
 #define JMR3927_IOC_DIPSW_ADDR	(JMR3927_IOC_BASE + 0x00030000)
 #define JMR3927_IOC_BREV_ADDR	(JMR3927_IOC_BASE + 0x00040000)
@@ -115,9 +115,9 @@
 #define JMR3927_NR_IRQ_IRC	16	/* On-Chip IRC */
 #define JMR3927_NR_IRQ_IOC	8	/* PCI/MODEM/INT[6:7] */
 
-#define JMR3927_IRQ_IRC	TXX9_IRQ_BASE
-#define JMR3927_IRQ_IOC	(JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC)
-#define JMR3927_IRQ_END	(JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC)
+#define JMR3927_IRQ_IRC TXX9_IRQ_BASE
+#define JMR3927_IRQ_IOC (JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC)
+#define JMR3927_IRQ_END (JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC)
 
 #define JMR3927_IRQ_IRC_INT0	(JMR3927_IRQ_IRC + TX3927_IR_INT0)
 #define JMR3927_IRQ_IRC_INT1	(JMR3927_IRQ_IRC + TX3927_IR_INT1)
@@ -127,11 +127,11 @@
 #define JMR3927_IRQ_IRC_INT5	(JMR3927_IRQ_IRC + TX3927_IR_INT5)
 #define JMR3927_IRQ_IRC_SIO0	(JMR3927_IRQ_IRC + TX3927_IR_SIO0)
 #define JMR3927_IRQ_IRC_SIO1	(JMR3927_IRQ_IRC + TX3927_IR_SIO1)
-#define JMR3927_IRQ_IRC_SIO(ch)	(JMR3927_IRQ_IRC + TX3927_IR_SIO(ch))
+#define JMR3927_IRQ_IRC_SIO(ch) (JMR3927_IRQ_IRC + TX3927_IR_SIO(ch))
 #define JMR3927_IRQ_IRC_DMA	(JMR3927_IRQ_IRC + TX3927_IR_DMA)
 #define JMR3927_IRQ_IRC_PIO	(JMR3927_IRQ_IRC + TX3927_IR_PIO)
 #define JMR3927_IRQ_IRC_PCI	(JMR3927_IRQ_IRC + TX3927_IR_PCI)
-#define JMR3927_IRQ_IRC_TMR(ch)	(JMR3927_IRQ_IRC + TX3927_IR_TMR(ch))
+#define JMR3927_IRQ_IRC_TMR(ch) (JMR3927_IRQ_IRC + TX3927_IR_TMR(ch))
 #define JMR3927_IRQ_IOC_PCIA	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIA)
 #define JMR3927_IRQ_IOC_PCIB	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIB)
 #define JMR3927_IRQ_IOC_PCIC	(JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIC)
@@ -147,7 +147,7 @@
 #define JMR3927_IRQ_ETHER0	JMR3927_IRQ_IRC_INT3
 
 /* Clocks */
-#define JMR3927_CORECLK	132710400	/* 132.7MHz */
+#define JMR3927_CORECLK 132710400	/* 132.7MHz */
 
 /*
  * TX3927 Pin Configuration:
diff --git a/arch/mips/include/asm/txx9/rbtx4927.h b/arch/mips/include/asm/txx9/rbtx4927.h
index b2adab3..4060ad2 100644
--- a/arch/mips/include/asm/txx9/rbtx4927.h
+++ b/arch/mips/include/asm/txx9/rbtx4927.h
@@ -1,6 +1,6 @@
 /*
  * Author: MontaVista Software, Inc.
- *         source@mvista.com
+ *	   source@mvista.com
  *
  * Copyright 2001-2002 MontaVista Software Inc.
  *
@@ -38,7 +38,7 @@
 #define RBTX4927_IMASK_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002000)
 #define RBTX4927_IMSTAT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002006)
 #define RBTX4927_SOFTINT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00003000)
-#define RBTX4927_SOFTRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000f000)
+#define RBTX4927_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f000)
 #define RBTX4927_SOFTRESETLOCK_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000f002)
 #define RBTX4927_PCIRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000f006)
 #define RBTX4927_BRAMRTC_BASE	(IO_BASE + TXX9_CE(2) + 0x00010000)
@@ -50,7 +50,7 @@
 #define rbtx4927_imask_addr	((__u8 __iomem *)RBTX4927_IMASK_ADDR)
 #define rbtx4927_imstat_addr	((__u8 __iomem *)RBTX4927_IMSTAT_ADDR)
 #define rbtx4927_softint_addr	((__u8 __iomem *)RBTX4927_SOFTINT_ADDR)
-#define rbtx4927_softreset_addr	((__u8 __iomem *)RBTX4927_SOFTRESET_ADDR)
+#define rbtx4927_softreset_addr ((__u8 __iomem *)RBTX4927_SOFTRESET_ADDR)
 #define rbtx4927_softresetlock_addr	\
 				((__u8 __iomem *)RBTX4927_SOFTRESETLOCK_ADDR)
 #define rbtx4927_pcireset_addr	((__u8 __iomem *)RBTX4927_PCIRESET_ADDR)
diff --git a/arch/mips/include/asm/txx9/rbtx4938.h b/arch/mips/include/asm/txx9/rbtx4938.h
index 9f0441a..9c969dd 100644
--- a/arch/mips/include/asm/txx9/rbtx4938.h
+++ b/arch/mips/include/asm/txx9/rbtx4938.h
@@ -36,7 +36,7 @@
 #define RBTX4938_SPICS_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005002)
 #define RBTX4938_SFPWR_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005008)
 #define RBTX4938_SFVOL_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000500a)
-#define RBTX4938_SOFTRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007000)
+#define RBTX4938_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x00007000)
 #define RBTX4938_SOFTRESETLOCK_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007002)
 #define RBTX4938_PCIRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007004)
 #define RBTX4938_ETHER_BASE	(IO_BASE + TXX9_CE(2) + 0x00020000)
@@ -78,7 +78,7 @@
 #define rbtx4938_spics_addr	((__u8 __iomem *)RBTX4938_SPICS_ADDR)
 #define rbtx4938_sfpwr_addr	((__u8 __iomem *)RBTX4938_SFPWR_ADDR)
 #define rbtx4938_sfvol_addr	((__u8 __iomem *)RBTX4938_SFVOL_ADDR)
-#define rbtx4938_softreset_addr	((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR)
+#define rbtx4938_softreset_addr ((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR)
 #define rbtx4938_softresetlock_addr	\
 				((__u8 __iomem *)RBTX4938_SOFTRESETLOCK_ADDR)
 #define rbtx4938_pcireset_addr	((__u8 __iomem *)RBTX4938_PCIRESET_ADDR)
@@ -94,7 +94,7 @@
 
 /* These are the virtual IRQ numbers, we divide all IRQ's into
  * 'spaces', the 'space' determines where and how to enable/disable
- * that particular IRQ on an RBTX4938 machine.  Add new 'spaces' as new
+ * that particular IRQ on an RBTX4938 machine.	Add new 'spaces' as new
  * IRQ hardware is supported.
  */
 #define RBTX4938_NR_IRQ_IOC	8
@@ -103,18 +103,18 @@
 #define RBTX4938_IRQ_IOC	(TXX9_IRQ_BASE + TX4938_NUM_IR)
 #define RBTX4938_IRQ_END	(RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC)
 
-#define RBTX4938_IRQ_IRC_ECCERR	(RBTX4938_IRQ_IRC + TX4938_IR_ECCERR)
-#define RBTX4938_IRQ_IRC_WTOERR	(RBTX4938_IRQ_IRC + TX4938_IR_WTOERR)
-#define RBTX4938_IRQ_IRC_INT(n)	(RBTX4938_IRQ_IRC + TX4938_IR_INT(n))
-#define RBTX4938_IRQ_IRC_SIO(n)	(RBTX4938_IRQ_IRC + TX4938_IR_SIO(n))
+#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR)
+#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR)
+#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n))
+#define RBTX4938_IRQ_IRC_SIO(n) (RBTX4938_IRQ_IRC + TX4938_IR_SIO(n))
 #define RBTX4938_IRQ_IRC_DMA(ch, n)	(RBTX4938_IRQ_IRC + TX4938_IR_DMA(ch, n))
 #define RBTX4938_IRQ_IRC_PIO	(RBTX4938_IRQ_IRC + TX4938_IR_PIO)
 #define RBTX4938_IRQ_IRC_PDMAC	(RBTX4938_IRQ_IRC + TX4938_IR_PDMAC)
 #define RBTX4938_IRQ_IRC_PCIC	(RBTX4938_IRQ_IRC + TX4938_IR_PCIC)
-#define RBTX4938_IRQ_IRC_TMR(n)	(RBTX4938_IRQ_IRC + TX4938_IR_TMR(n))
+#define RBTX4938_IRQ_IRC_TMR(n) (RBTX4938_IRQ_IRC + TX4938_IR_TMR(n))
 #define RBTX4938_IRQ_IRC_NDFMC	(RBTX4938_IRQ_IRC + TX4938_IR_NDFMC)
-#define RBTX4938_IRQ_IRC_PCIERR	(RBTX4938_IRQ_IRC + TX4938_IR_PCIERR)
-#define RBTX4938_IRQ_IRC_PCIPME	(RBTX4938_IRQ_IRC + TX4938_IR_PCIPME)
+#define RBTX4938_IRQ_IRC_PCIERR (RBTX4938_IRQ_IRC + TX4938_IR_PCIERR)
+#define RBTX4938_IRQ_IRC_PCIPME (RBTX4938_IRQ_IRC + TX4938_IR_PCIPME)
 #define RBTX4938_IRQ_IRC_ACLC	(RBTX4938_IRQ_IRC + TX4938_IR_ACLC)
 #define RBTX4938_IRQ_IRC_ACLCPME	(RBTX4938_IRQ_IRC + TX4938_IR_ACLCPME)
 #define RBTX4938_IRQ_IRC_PCIC1	(RBTX4938_IRQ_IRC + TX4938_IR_PCIC1)
diff --git a/arch/mips/include/asm/txx9/rbtx4939.h b/arch/mips/include/asm/txx9/rbtx4939.h
index e517899..6157bfd 100644
--- a/arch/mips/include/asm/txx9/rbtx4939.h
+++ b/arch/mips/include/asm/txx9/rbtx4939.h
@@ -17,7 +17,7 @@
 
 /* Address map */
 #define RBTX4939_IOC_REG_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000000)
-#define RBTX4939_BOARD_REV_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000000)
+#define RBTX4939_BOARD_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000)
 #define RBTX4939_IOC_REV_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000002)
 #define RBTX4939_CONFIG1_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000004)
 #define RBTX4939_CONFIG2_ADDR	(IO_BASE + TXX9_CE(1) + 0x00000006)
@@ -46,9 +46,9 @@
 #define RBTX4939_VPSIN_ADDR	(IO_BASE + TXX9_CE(1) + 0x0000500c)
 #define RBTX4939_7SEG_ADDR(s, ch)	\
 	(IO_BASE + TXX9_CE(1) + 0x00006000 + (s) * 16 + ((ch) & 3) * 2)
-#define RBTX4939_SOFTRESET_ADDR	(IO_BASE + TXX9_CE(1) + 0x00007000)
+#define RBTX4939_SOFTRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00007000)
 #define RBTX4939_RESETEN_ADDR	(IO_BASE + TXX9_CE(1) + 0x00007002)
-#define RBTX4939_RESETSTAT_ADDR	(IO_BASE + TXX9_CE(1) + 0x00007004)
+#define RBTX4939_RESETSTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00007004)
 #define RBTX4939_ETHER_BASE	(IO_BASE + TXX9_CE(1) + 0x00020000)
 
 /* Ethernet port address */
@@ -77,11 +77,11 @@
 #define RBTX4939_PE2_CIR	0x08
 #define RBTX4939_PE2_SPI	0x10
 #define RBTX4939_PE2_GPIO	0x20
-#define RBTX4939_PE3_VP	0x01
+#define RBTX4939_PE3_VP 0x01
 #define RBTX4939_PE3_VP_P	0x02
 #define RBTX4939_PE3_VP_S	0x04
 
-#define rbtx4939_board_rev_addr	((u8 __iomem *)RBTX4939_BOARD_REV_ADDR)
+#define rbtx4939_board_rev_addr ((u8 __iomem *)RBTX4939_BOARD_REV_ADDR)
 #define rbtx4939_ioc_rev_addr	((u8 __iomem *)RBTX4939_IOC_REV_ADDR)
 #define rbtx4939_config1_addr	((u8 __iomem *)RBTX4939_CONFIG1_ADDR)
 #define rbtx4939_config2_addr	((u8 __iomem *)RBTX4939_CONFIG2_ADDR)
@@ -110,9 +110,9 @@
 #define rbtx4939_vpsin_addr	((u8 __iomem *)RBTX4939_VPSIN_ADDR)
 #define rbtx4939_7seg_addr(s, ch) \
 				((u8 __iomem *)RBTX4939_7SEG_ADDR(s, ch))
-#define rbtx4939_softreset_addr	((u8 __iomem *)RBTX4939_SOFTRESET_ADDR)
+#define rbtx4939_softreset_addr ((u8 __iomem *)RBTX4939_SOFTRESET_ADDR)
 #define rbtx4939_reseten_addr	((u8 __iomem *)RBTX4939_RESETEN_ADDR)
-#define rbtx4939_resetstat_addr	((u8 __iomem *)RBTX4939_RESETSTAT_ADDR)
+#define rbtx4939_resetstat_addr ((u8 __iomem *)RBTX4939_RESETSTAT_ADDR)
 
 /*
  * IRQ mappings
diff --git a/arch/mips/include/asm/txx9/smsc_fdc37m81x.h b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h
index d1d6332..926d08f 100644
--- a/arch/mips/include/asm/txx9/smsc_fdc37m81x.h
+++ b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h
@@ -18,43 +18,43 @@
 /* Common Registers */
 #define SMSC_FDC37M81X_CONFIG_INDEX  0x00
 #define SMSC_FDC37M81X_CONFIG_DATA   0x01
-#define SMSC_FDC37M81X_CONF          0x02
-#define SMSC_FDC37M81X_INDEX         0x03
-#define SMSC_FDC37M81X_DNUM          0x07
-#define SMSC_FDC37M81X_DID           0x20
-#define SMSC_FDC37M81X_DREV          0x21
-#define SMSC_FDC37M81X_PCNT          0x22
-#define SMSC_FDC37M81X_PMGT          0x23
-#define SMSC_FDC37M81X_OSC           0x24
-#define SMSC_FDC37M81X_CONFPA0       0x26
-#define SMSC_FDC37M81X_CONFPA1       0x27
-#define SMSC_FDC37M81X_TEST4         0x2B
-#define SMSC_FDC37M81X_TEST5         0x2C
-#define SMSC_FDC37M81X_TEST1         0x2D
-#define SMSC_FDC37M81X_TEST2         0x2E
-#define SMSC_FDC37M81X_TEST3         0x2F
+#define SMSC_FDC37M81X_CONF	     0x02
+#define SMSC_FDC37M81X_INDEX	     0x03
+#define SMSC_FDC37M81X_DNUM	     0x07
+#define SMSC_FDC37M81X_DID	     0x20
+#define SMSC_FDC37M81X_DREV	     0x21
+#define SMSC_FDC37M81X_PCNT	     0x22
+#define SMSC_FDC37M81X_PMGT	     0x23
+#define SMSC_FDC37M81X_OSC	     0x24
+#define SMSC_FDC37M81X_CONFPA0	     0x26
+#define SMSC_FDC37M81X_CONFPA1	     0x27
+#define SMSC_FDC37M81X_TEST4	     0x2B
+#define SMSC_FDC37M81X_TEST5	     0x2C
+#define SMSC_FDC37M81X_TEST1	     0x2D
+#define SMSC_FDC37M81X_TEST2	     0x2E
+#define SMSC_FDC37M81X_TEST3	     0x2F
 
 /* Logical device numbers */
-#define SMSC_FDC37M81X_FDD           0x00
-#define SMSC_FDC37M81X_PARALLEL      0x03
-#define SMSC_FDC37M81X_SERIAL1       0x04
-#define SMSC_FDC37M81X_SERIAL2       0x05
-#define SMSC_FDC37M81X_KBD           0x07
-#define SMSC_FDC37M81X_AUXIO         0x08
-#define SMSC_FDC37M81X_NONE          0xff
+#define SMSC_FDC37M81X_FDD	     0x00
+#define SMSC_FDC37M81X_PARALLEL	     0x03
+#define SMSC_FDC37M81X_SERIAL1	     0x04
+#define SMSC_FDC37M81X_SERIAL2	     0x05
+#define SMSC_FDC37M81X_KBD	     0x07
+#define SMSC_FDC37M81X_AUXIO	     0x08
+#define SMSC_FDC37M81X_NONE	     0xff
 
 /* Logical device Config Registers */
-#define SMSC_FDC37M81X_ACTIVE        0x30
+#define SMSC_FDC37M81X_ACTIVE	     0x30
 #define SMSC_FDC37M81X_BASEADDR0     0x60
 #define SMSC_FDC37M81X_BASEADDR1     0x61
-#define SMSC_FDC37M81X_INT           0x70
-#define SMSC_FDC37M81X_INT2          0x72
-#define SMSC_FDC37M81X_LDCR_F0       0xF0
+#define SMSC_FDC37M81X_INT	     0x70
+#define SMSC_FDC37M81X_INT2	     0x72
+#define SMSC_FDC37M81X_LDCR_F0	     0xF0
 
 /* Chip Config Values */
 #define SMSC_FDC37M81X_CONFIG_ENTER  0x55
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
-#define SMSC_FDC37M81X_CHIP_ID       0x4d
+#define SMSC_FDC37M81X_CHIP_ID	     0x4d
 
 unsigned long smsc_fdc37m81x_init(unsigned long port);
 
diff --git a/arch/mips/include/asm/txx9/tx3927.h b/arch/mips/include/asm/txx9/tx3927.h
index dc30c8d..149fab4 100644
--- a/arch/mips/include/asm/txx9/tx3927.h
+++ b/arch/mips/include/asm/txx9/tx3927.h
@@ -8,8 +8,8 @@
 #ifndef __ASM_TXX9_TX3927_H
 #define __ASM_TXX9_TX3927_H
 
-#define TX3927_REG_BASE	0xfffe0000UL
-#define TX3927_REG_SIZE	0x00010000
+#define TX3927_REG_BASE 0xfffe0000UL
+#define TX3927_REG_SIZE 0x00010000
 #define TX3927_SDRAMC_REG	(TX3927_REG_BASE + 0x8000)
 #define TX3927_ROMC_REG		(TX3927_REG_BASE + 0x9000)
 #define TX3927_DMA_REG		(TX3927_REG_BASE + 0xb000)
@@ -191,8 +191,8 @@
 #define TX3927_DMA_CCR_XFSZ_1W	TX3927_DMA_CCR_XFSZ(2)
 #define TX3927_DMA_CCR_XFSZ_4W	TX3927_DMA_CCR_XFSZ(4)
 #define TX3927_DMA_CCR_XFSZ_8W	TX3927_DMA_CCR_XFSZ(5)
-#define TX3927_DMA_CCR_XFSZ_16W	TX3927_DMA_CCR_XFSZ(6)
-#define TX3927_DMA_CCR_XFSZ_32W	TX3927_DMA_CCR_XFSZ(7)
+#define TX3927_DMA_CCR_XFSZ_16W TX3927_DMA_CCR_XFSZ(6)
+#define TX3927_DMA_CCR_XFSZ_32W TX3927_DMA_CCR_XFSZ(7)
 #define TX3927_DMA_CCR_MEMIO	0x00000002
 #define TX3927_DMA_CCR_ONEAD	0x00000001
 
@@ -250,7 +250,7 @@
 /* see PCI_BASE_ADDRESS_XXX in linux/pci.h */
 
 /* bits for PBAPMC */
-#define TX3927_PCIC_PBAPMC_RPBA	0x00000004
+#define TX3927_PCIC_PBAPMC_RPBA 0x00000004
 #define TX3927_PCIC_PBAPMC_PBAEN	0x00000002
 #define TX3927_PCIC_PBAPMC_BMCEN	0x00000001
 
@@ -282,7 +282,7 @@
 #define TX3927_CCFG_TLBOFF	0x00020000
 #define TX3927_CCFG_BEOW	0x00010000
 #define TX3927_CCFG_WR	0x00008000
-#define TX3927_CCFG_TOE	0x00004000
+#define TX3927_CCFG_TOE 0x00004000
 #define TX3927_CCFG_PCIXARB	0x00002000
 #define TX3927_CCFG_PCI3	0x00001000
 #define TX3927_CCFG_PSNP	0x00000800
@@ -301,8 +301,8 @@
 #define TX3927_PCFG_SELALL	0x0003ffff
 #define TX3927_PCFG_SELCS	0x00020000
 #define TX3927_PCFG_SELDSF	0x00010000
-#define TX3927_PCFG_SELSIOC_ALL	0x0000c000
-#define TX3927_PCFG_SELSIOC(ch)	(0x00004000<<(ch))
+#define TX3927_PCFG_SELSIOC_ALL 0x0000c000
+#define TX3927_PCFG_SELSIOC(ch) (0x00004000<<(ch))
 #define TX3927_PCFG_SELSIO_ALL	0x00003000
 #define TX3927_PCFG_SELSIO(ch)	(0x00001000<<(ch))
 #define TX3927_PCFG_SELTMR_ALL	0x00000e00
diff --git a/arch/mips/include/asm/txx9/tx4927.h b/arch/mips/include/asm/txx9/tx4927.h
index 18c98c5..284eea7 100644
--- a/arch/mips/include/asm/txx9/tx4927.h
+++ b/arch/mips/include/asm/txx9/tx4927.h
@@ -1,6 +1,6 @@
 /*
  * Author: MontaVista Software, Inc.
- *         source@mvista.com
+ *	   source@mvista.com
  *
  * Copyright 2001-2006 MontaVista Software Inc.
  *
@@ -33,11 +33,11 @@
 #include <asm/txx9/tx4927pcic.h>
 
 #ifdef CONFIG_64BIT
-#define TX4927_REG_BASE	0xffffffffff1f0000UL
+#define TX4927_REG_BASE 0xffffffffff1f0000UL
 #else
-#define TX4927_REG_BASE	0xff1f0000UL
+#define TX4927_REG_BASE 0xff1f0000UL
 #endif
-#define TX4927_REG_SIZE	0x00010000
+#define TX4927_REG_SIZE 0x00010000
 
 #define TX4927_SDRAMC_REG	(TX4927_REG_BASE + 0x8000)
 #define TX4927_EBUSC_REG	(TX4927_REG_BASE + 0x9000)
@@ -118,10 +118,10 @@
 #define TX4927_CCFG_DIVMODE_2	(0x4 << 17)
 #define TX4927_CCFG_DIVMODE_3	(0x5 << 17)
 #define TX4927_CCFG_DIVMODE_4	(0x6 << 17)
-#define TX4927_CCFG_DIVMODE_2_5	(0x7 << 17)
+#define TX4927_CCFG_DIVMODE_2_5 (0x7 << 17)
 #define TX4927_CCFG_BEOW	0x00010000
 #define TX4927_CCFG_WR	0x00008000
-#define TX4927_CCFG_TOE	0x00004000
+#define TX4927_CCFG_TOE 0x00004000
 #define TX4927_CCFG_PCIARB	0x00002000
 #define TX4927_CCFG_PCIDIVMODE_MASK	0x00001800
 #define TX4927_CCFG_PCIDIVMODE_2_5	0x00000000
@@ -136,10 +136,10 @@
 
 /* PCFG : Pin Configuration */
 #define TX4927_PCFG_SDCLKDLY_MASK	0x30000000
-#define TX4927_PCFG_SDCLKDLY(d)	((d)<<28)
+#define TX4927_PCFG_SDCLKDLY(d) ((d)<<28)
 #define TX4927_PCFG_SYSCLKEN	0x08000000
-#define TX4927_PCFG_SDCLKEN_ALL	0x07800000
-#define TX4927_PCFG_SDCLKEN(ch)	(0x00800000<<(ch))
+#define TX4927_PCFG_SDCLKEN_ALL 0x07800000
+#define TX4927_PCFG_SDCLKEN(ch) (0x00800000<<(ch))
 #define TX4927_PCFG_PCICLKEN_ALL	0x003f0000
 #define TX4927_PCFG_PCICLKEN(ch)	(0x00010000<<(ch))
 #define TX4927_PCFG_SEL2	0x00000200
diff --git a/arch/mips/include/asm/txx9/tx4927pcic.h b/arch/mips/include/asm/txx9/tx4927pcic.h
index c470b8a..9eab269 100644
--- a/arch/mips/include/asm/txx9/tx4927pcic.h
+++ b/arch/mips/include/asm/txx9/tx4927pcic.h
@@ -93,7 +93,7 @@
 
 /* bits for PBACFG */
 #define TX4927_PCIC_PBACFG_FIXPA	0x00000008
-#define TX4927_PCIC_PBACFG_RPBA	0x00000004
+#define TX4927_PCIC_PBACFG_RPBA 0x00000004
 #define TX4927_PCIC_PBACFG_PBAEN	0x00000002
 #define TX4927_PCIC_PBACFG_BMCEN	0x00000001
 
@@ -165,7 +165,7 @@
 #define TX4927_PCIC_PDMCFG_CHNEN	0x00000080
 #define TX4927_PCIC_PDMCFG_XFRACT	0x00000040
 #define TX4927_PCIC_PDMCFG_BSWAP	0x00000020
-#define TX4927_PCIC_PDMCFG_XFRSIZE_MASK	0x0000000c
+#define TX4927_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c
 #define TX4927_PCIC_PDMCFG_XFRSIZE_1DW	0x00000000
 #define TX4927_PCIC_PDMCFG_XFRSIZE_1QW	0x00000004
 #define TX4927_PCIC_PDMCFG_XFRSIZE_4QW	0x00000008
@@ -174,7 +174,7 @@
 
 /* bits for PDMSTS */
 #define TX4927_PCIC_PDMSTS_REQCNT_MASK	0x3f000000
-#define TX4927_PCIC_PDMSTS_FIFOCNT_MASK	0x00f00000
+#define TX4927_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000
 #define TX4927_PCIC_PDMSTS_FIFOWP_MASK	0x000c0000
 #define TX4927_PCIC_PDMSTS_FIFORP_MASK	0x00030000
 #define TX4927_PCIC_PDMSTS_ERRINT	0x00000800
diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h
index 8a178f1..6ca767e 100644
--- a/arch/mips/include/asm/txx9/tx4938.h
+++ b/arch/mips/include/asm/txx9/tx4938.h
@@ -16,11 +16,11 @@
 #include <asm/txx9/tx4927.h>
 
 #ifdef CONFIG_64BIT
-#define TX4938_REG_BASE	0xffffffffff1f0000UL /* == TX4937_REG_BASE */
+#define TX4938_REG_BASE 0xffffffffff1f0000UL /* == TX4937_REG_BASE */
 #else
-#define TX4938_REG_BASE	0xff1f0000UL /* == TX4937_REG_BASE */
+#define TX4938_REG_BASE 0xff1f0000UL /* == TX4937_REG_BASE */
 #endif
-#define TX4938_REG_SIZE	0x00010000 /* == TX4937_REG_SIZE */
+#define TX4938_REG_SIZE 0x00010000 /* == TX4937_REG_SIZE */
 
 /* NDFMC, SRAMC, PCIC1, SPIC: TX4938 only */
 #define TX4938_NDFMC_REG	(TX4938_REG_BASE + 0x5000)
@@ -72,16 +72,16 @@
 #define TX4938_NUM_IR_DMA	4
 #define TX4938_IR_DMA(ch, n)	((ch ? 27 : 10) + (n)) /* 10-13, 27-30 */
 #define TX4938_IR_PIO	14
-#define TX4938_IR_PDMAC	15
+#define TX4938_IR_PDMAC 15
 #define TX4938_IR_PCIC	16
 #define TX4938_NUM_IR_TMR	3
 #define TX4938_IR_TMR(n)	(17 + (n))
-#define TX4938_IR_NDFMC	21
+#define TX4938_IR_NDFMC 21
 #define TX4938_IR_PCIERR	22
 #define TX4938_IR_PCIPME	23
 #define TX4938_IR_ACLC	24
 #define TX4938_IR_ACLCPME	25
-#define TX4938_IR_PCIC1	26
+#define TX4938_IR_PCIC1 26
 #define TX4938_IR_SPI	31
 #define TX4938_NUM_IR	32
 /* multiplex */
@@ -105,10 +105,10 @@
 #define TX4938_CCFG_PCI1_66	0x00200000
 #define TX4938_CCFG_DIVMODE_MASK	0x001e0000
 #define TX4938_CCFG_DIVMODE_2	(0x4 << 17)
-#define TX4938_CCFG_DIVMODE_2_5	(0xf << 17)
+#define TX4938_CCFG_DIVMODE_2_5 (0xf << 17)
 #define TX4938_CCFG_DIVMODE_3	(0x5 << 17)
 #define TX4938_CCFG_DIVMODE_4	(0x6 << 17)
-#define TX4938_CCFG_DIVMODE_4_5	(0xd << 17)
+#define TX4938_CCFG_DIVMODE_4_5 (0xd << 17)
 #define TX4938_CCFG_DIVMODE_8	(0x0 << 17)
 #define TX4938_CCFG_DIVMODE_10	(0xb << 17)
 #define TX4938_CCFG_DIVMODE_12	(0x1 << 17)
@@ -116,7 +116,7 @@
 #define TX4938_CCFG_DIVMODE_18	(0x9 << 17)
 #define TX4938_CCFG_BEOW	0x00010000
 #define TX4938_CCFG_WR	0x00008000
-#define TX4938_CCFG_TOE	0x00004000
+#define TX4938_CCFG_TOE 0x00004000
 #define TX4938_CCFG_PCIARB	0x00002000
 #define TX4938_CCFG_PCIDIVMODE_MASK	0x00001c00
 #define TX4938_CCFG_PCIDIVMODE_4	(0x1 << 10)
@@ -141,10 +141,10 @@
 #define TX4938_PCFG_SPI_SEL	0x0800000000000000ULL
 #define TX4938_PCFG_NDF_SEL	0x0400000000000000ULL
 #define TX4938_PCFG_SDCLKDLY_MASK	0x30000000
-#define TX4938_PCFG_SDCLKDLY(d)	((d)<<28)
+#define TX4938_PCFG_SDCLKDLY(d) ((d)<<28)
 #define TX4938_PCFG_SYSCLKEN	0x08000000
-#define TX4938_PCFG_SDCLKEN_ALL	0x07800000
-#define TX4938_PCFG_SDCLKEN(ch)	(0x00800000<<(ch))
+#define TX4938_PCFG_SDCLKEN_ALL 0x07800000
+#define TX4938_PCFG_SDCLKEN(ch) (0x00800000<<(ch))
 #define TX4938_PCFG_PCICLKEN_ALL	0x003f0000
 #define TX4938_PCFG_PCICLKEN(ch)	(0x00010000<<(ch))
 #define TX4938_PCFG_SEL2	0x00000200
@@ -230,8 +230,8 @@
 #define TX4938_DMA_CCR_XFSZ_2W	TX4938_DMA_CCR_XFSZ(3)
 #define TX4938_DMA_CCR_XFSZ_4W	TX4938_DMA_CCR_XFSZ(4)
 #define TX4938_DMA_CCR_XFSZ_8W	TX4938_DMA_CCR_XFSZ(5)
-#define TX4938_DMA_CCR_XFSZ_16W	TX4938_DMA_CCR_XFSZ(6)
-#define TX4938_DMA_CCR_XFSZ_32W	TX4938_DMA_CCR_XFSZ(7)
+#define TX4938_DMA_CCR_XFSZ_16W TX4938_DMA_CCR_XFSZ(6)
+#define TX4938_DMA_CCR_XFSZ_32W TX4938_DMA_CCR_XFSZ(7)
 #define TX4938_DMA_CCR_MEMIO	0x00000002
 #define TX4938_DMA_CCR_SNGAD	0x00000001
 
@@ -263,9 +263,9 @@
 #define TX4938_REV_PCODE()	\
 	((__u32)__raw_readq(&tx4938_ccfgptr->crir) >> 16)
 
-#define tx4938_ccfg_clear(bits)	tx4927_ccfg_clear(bits)
+#define tx4938_ccfg_clear(bits) tx4927_ccfg_clear(bits)
 #define tx4938_ccfg_set(bits)	tx4927_ccfg_set(bits)
-#define tx4938_ccfg_change(change, new)	tx4927_ccfg_change(change, new)
+#define tx4938_ccfg_change(change, new) tx4927_ccfg_change(change, new)
 
 #define TX4938_SDRAMC_CR(ch)	TX4927_SDRAMC_CR(ch)
 #define TX4938_SDRAMC_BA(ch)	TX4927_SDRAMC_BA(ch)
diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h
index d4f342c..6d66708 100644
--- a/arch/mips/include/asm/txx9/tx4939.h
+++ b/arch/mips/include/asm/txx9/tx4939.h
@@ -14,11 +14,11 @@
 #include <asm/txx9/tx4938.h>
 
 #ifdef CONFIG_64BIT
-#define TX4939_REG_BASE	0xffffffffff1f0000UL /* == TX4938_REG_BASE */
+#define TX4939_REG_BASE 0xffffffffff1f0000UL /* == TX4938_REG_BASE */
 #else
-#define TX4939_REG_BASE	0xff1f0000UL /* == TX4938_REG_BASE */
+#define TX4939_REG_BASE 0xff1f0000UL /* == TX4938_REG_BASE */
 #endif
-#define TX4939_REG_SIZE	0x00010000 /* == TX4938_REG_SIZE */
+#define TX4939_REG_SIZE 0x00010000 /* == TX4938_REG_SIZE */
 
 #define TX4939_ATA_REG(ch)	(TX4939_REG_BASE + 0x3000 + (ch) * 0x1000)
 #define TX4939_NDFMC_REG	(TX4939_REG_BASE + 0x5000)
@@ -189,14 +189,14 @@
 #define TX4939_IR_INT(n)	(3 + (n))
 #define TX4939_NUM_IR_ETH	2
 #define TX4939_IR_ETH(n)	((n) ? 43 : 6)
-#define TX4939_IR_VIDEO	7
+#define TX4939_IR_VIDEO 7
 #define TX4939_IR_CIR	8
 #define TX4939_NUM_IR_SIO	4
 #define TX4939_IR_SIO(n)	((n) ? 43 + (n) : 9)	/* 9,44-46 */
 #define TX4939_NUM_IR_DMA	4
 #define TX4939_IR_DMA(ch, n)	(((ch) ? 22 : 10) + (n)) /* 10-13,22-25 */
 #define TX4939_IR_IRC	14
-#define TX4939_IR_PDMAC	15
+#define TX4939_IR_PDMAC 15
 #define TX4939_NUM_IR_TMR	6
 #define TX4939_IR_TMR(n)	(((n) >= 3 ? 45 : 16) + (n)) /* 16-18,48-50 */
 #define TX4939_NUM_IR_ATA	2
@@ -210,10 +210,10 @@
 #define TX4939_IR_I2C	33
 #define TX4939_IR_SPI	34
 #define TX4939_IR_PCIC	35
-#define TX4939_IR_PCIC1	36
+#define TX4939_IR_PCIC1 36
 #define TX4939_IR_PCIERR	37
 #define TX4939_IR_PCIPME	38
-#define TX4939_IR_NDFMC	39
+#define TX4939_IR_NDFMC 39
 #define TX4939_IR_ACLCPME	40
 #define TX4939_IR_RTC	41
 #define TX4939_IR_RND	42
@@ -239,7 +239,7 @@
 #define TX4939_CCFG_PCI66	0x00800000
 #define TX4939_CCFG_PCIMODE	0x00400000
 #define TX4939_CCFG_SSCG	0x00100000
-#define TX4939_CCFG_MULCLK_MASK	0x000e0000
+#define TX4939_CCFG_MULCLK_MASK 0x000e0000
 #define TX4939_CCFG_MULCLK_8	(0x7 << 17)
 #define TX4939_CCFG_MULCLK_9	(0x0 << 17)
 #define TX4939_CCFG_MULCLK_10	(0x1 << 17)
@@ -250,7 +250,7 @@
 #define TX4939_CCFG_MULCLK_15	(0x6 << 17)
 #define TX4939_CCFG_BEOW	0x00010000
 #define TX4939_CCFG_WR	0x00008000
-#define TX4939_CCFG_TOE	0x00004000
+#define TX4939_CCFG_TOE 0x00004000
 #define TX4939_CCFG_PCIARB	0x00002000
 #define TX4939_CCFG_YDIVMODE_MASK	0x00001c00
 #define TX4939_CCFG_YDIVMODE_2	(0x0 << 10)
@@ -275,7 +275,7 @@
 #define TX4939_PCFG_I2CMODE	0x1000000000000000ULL
 #define TX4939_PCFG_I2SMODE_MASK	0x0c00000000000000ULL
 #define TX4939_PCFG_I2SMODE_GPIO	0x0c00000000000000ULL
-#define TX4939_PCFG_I2SMODE_I2S	0x0800000000000000ULL
+#define TX4939_PCFG_I2SMODE_I2S 0x0800000000000000ULL
 #define TX4939_PCFG_I2SMODE_I2S_ALT	0x0400000000000000ULL
 #define TX4939_PCFG_I2SMODE_ACLC	0x0000000000000000ULL
 #define TX4939_PCFG_SIO3MODE	0x0200000000000000ULL
@@ -392,15 +392,15 @@
 /*
  * CRYPTO
  */
-#define TX4939_CRYPTO_CSR_SAESO	0x08000000
-#define TX4939_CRYPTO_CSR_SAESI	0x04000000
-#define TX4939_CRYPTO_CSR_SDESO	0x02000000
-#define TX4939_CRYPTO_CSR_SDESI	0x01000000
+#define TX4939_CRYPTO_CSR_SAESO 0x08000000
+#define TX4939_CRYPTO_CSR_SAESI 0x04000000
+#define TX4939_CRYPTO_CSR_SDESO 0x02000000
+#define TX4939_CRYPTO_CSR_SDESI 0x01000000
 #define TX4939_CRYPTO_CSR_INDXBST_MASK	0x00700000
 #define TX4939_CRYPTO_CSR_INDXBST(n)	((n) << 20)
-#define TX4939_CRYPTO_CSR_TOINT	0x00080000
-#define TX4939_CRYPTO_CSR_DCINT	0x00040000
-#define TX4939_CRYPTO_CSR_GBINT	0x00010000
+#define TX4939_CRYPTO_CSR_TOINT 0x00080000
+#define TX4939_CRYPTO_CSR_DCINT 0x00040000
+#define TX4939_CRYPTO_CSR_GBINT 0x00010000
 #define TX4939_CRYPTO_CSR_INDXAST_MASK	0x0000e000
 #define TX4939_CRYPTO_CSR_INDXAST(n)	((n) << 13)
 #define TX4939_CRYPTO_CSR_CSWAP_MASK	0x00001800
@@ -418,7 +418,7 @@
 #define TX4939_CRYPTO_CSR_PDINT_END	0x00000040
 #define TX4939_CRYPTO_CSR_PDINT_NEXT	0x00000080
 #define TX4939_CRYPTO_CSR_PDINT_NONE	0x000000c0
-#define TX4939_CRYPTO_CSR_GINTE	0x00000008
+#define TX4939_CRYPTO_CSR_GINTE 0x00000008
 #define TX4939_CRYPTO_CSR_RSTD	0x00000004
 #define TX4939_CRYPTO_CSR_RSTC	0x00000002
 #define TX4939_CRYPTO_CSR_ENCR	0x00000001
@@ -442,7 +442,7 @@
 #define TX4939_CRYPTO_DESC_START	0x00000200
 #define TX4939_CRYPTO_DESC_END	0x00000100
 #define TX4939_CRYPTO_DESC_XOR	0x00000010
-#define TX4939_CRYPTO_DESC_LAST	0x00000008
+#define TX4939_CRYPTO_DESC_LAST 0x00000008
 #define TX4939_CRYPTO_DESC_ERR_MASK	0x00000006
 #define TX4939_CRYPTO_DESC_ERR_NONE	0x00000000
 #define TX4939_CRYPTO_DESC_ERR_TOUT	0x00000002
@@ -457,7 +457,7 @@
 
 #define TX4939_CRYPTO_NR_SET	6
 
-#define TX4939_CRYPTO_RCSR_INTE	0x00000008
+#define TX4939_CRYPTO_RCSR_INTE 0x00000008
 #define TX4939_CRYPTO_RCSR_RST	0x00000004
 #define TX4939_CRYPTO_RCSR_FIN	0x00000002
 #define TX4939_CRYPTO_RCSR_ST	0x00000001
@@ -480,8 +480,8 @@
 #define TX4939_VPC_CTRLA_PDINT_ALL	0x00000000
 #define TX4939_VPC_CTRLA_PDINT_NEXT	0x00000010
 #define TX4939_VPC_CTRLA_PDINT_NONE	0x00000030
-#define TX4939_VPC_CTRLA_VDVLDP	0x00000008
-#define TX4939_VPC_CTRLA_VDMODE	0x00000004
+#define TX4939_VPC_CTRLA_VDVLDP 0x00000008
+#define TX4939_VPC_CTRLA_VDMODE 0x00000004
 #define TX4939_VPC_CTRLA_VDFOR	0x00000002
 #define TX4939_VPC_CTRLA_ENVPC	0x00000001
 
@@ -512,9 +512,9 @@
 	((__u32)((__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_BCFG_MASK) \
 		 >> 32))
 
-#define tx4939_ccfg_clear(bits)	tx4938_ccfg_clear(bits)
+#define tx4939_ccfg_clear(bits) tx4938_ccfg_clear(bits)
 #define tx4939_ccfg_set(bits)	tx4938_ccfg_set(bits)
-#define tx4939_ccfg_change(change, new)	tx4938_ccfg_change(change, new)
+#define tx4939_ccfg_change(change, new) tx4938_ccfg_change(change, new)
 
 #define TX4939_EBUSC_CR(ch)	TX4927_EBUSC_CR(ch)
 #define TX4939_EBUSC_BA(ch)	TX4927_EBUSC_BA(ch)
@@ -522,7 +522,7 @@
 #define TX4939_EBUSC_WIDTH(ch)	\
 	(16 >> ((__u32)(TX4939_EBUSC_CR(ch) >> 20) & 0x1))
 
-/* SCLK0 = MSTCLK * 429/19 * 16/245 / 2  (14.745MHz for MST 20MHz) */
+/* SCLK0 = MSTCLK * 429/19 * 16/245 / 2	 (14.745MHz for MST 20MHz) */
 #define TX4939_SCLK0(mst)	\
 	((((mst) + 245/2) / 245UL * 429 * 16 + 19) / 19 / 2)
 
diff --git a/arch/mips/include/asm/txx9tmr.h b/arch/mips/include/asm/txx9tmr.h
index 67f70a8..466a3de 100644
--- a/arch/mips/include/asm/txx9tmr.h
+++ b/arch/mips/include/asm/txx9tmr.h
@@ -59,9 +59,9 @@
 void txx9_tmr_init(unsigned long baseaddr);
 
 #ifdef CONFIG_CPU_TX39XX
-#define TXX9_TIMER_BITS	24
+#define TXX9_TIMER_BITS 24
 #else
-#define TXX9_TIMER_BITS	32
+#define TXX9_TIMER_BITS 32
 #endif
 
 #endif /* __ASM_TXX9TMR_H */
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 3b92efe..bd87e36 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -87,12 +87,12 @@
 /*
  * access_ok: - Checks if a user space pointer is valid
  * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
- *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
- *        to write to a block, it is always safe to read from it.
+ *	  %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *	  to write to a block, it is always safe to read from it.
  * @addr: User space pointer to start of block to check
  * @size: Size of block to check
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * Checks if a pointer to a block of memory in user space is valid.
  *
@@ -124,10 +124,10 @@
 
 /*
  * put_user: - Write a simple value into user space.
- * @x:   Value to copy to user space.
+ * @x:	 Value to copy to user space.
  * @ptr: Destination address, in user space.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * This macro copies a single simple value from kernel space to user
  * space.  It supports simple types like char and int, but not larger
@@ -138,15 +138,15 @@
  *
  * Returns zero on success, or -EFAULT on error.
  */
-#define put_user(x,ptr)	\
+#define put_user(x,ptr) \
 	__put_user_check((x), (ptr), sizeof(*(ptr)))
 
 /*
  * get_user: - Get a simple variable from user space.
- * @x:   Variable to store result.
+ * @x:	 Variable to store result.
  * @ptr: Source address, in user space.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * This macro copies a single simple variable from user space to kernel
  * space.  It supports simple types like char and int, but not larger
@@ -163,10 +163,10 @@
 
 /*
  * __put_user: - Write a simple value into user space, with less checking.
- * @x:   Value to copy to user space.
+ * @x:	 Value to copy to user space.
  * @ptr: Destination address, in user space.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * This macro copies a single simple value from kernel space to user
  * space.  It supports simple types like char and int, but not larger
@@ -185,10 +185,10 @@
 
 /*
  * __get_user: - Get a simple variable from user space, with less checking.
- * @x:   Variable to store result.
+ * @x:	 Variable to store result.
  * @ptr: Source address, in user space.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * This macro copies a single simple variable from user space to kernel
  * space.  It supports simple types like char and int, but not larger
@@ -390,10 +390,10 @@
 
 /*
  * put_user_unaligned: - Write a simple value into user space.
- * @x:   Value to copy to user space.
+ * @x:	 Value to copy to user space.
  * @ptr: Destination address, in user space.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * This macro copies a single simple value from kernel space to user
  * space.  It supports simple types like char and int, but not larger
@@ -409,10 +409,10 @@
 
 /*
  * get_user_unaligned: - Get a simple variable from user space.
- * @x:   Variable to store result.
+ * @x:	 Variable to store result.
  * @ptr: Source address, in user space.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * This macro copies a single simple variable from user space to kernel
  * space.  It supports simple types like char and int, but not larger
@@ -429,10 +429,10 @@
 
 /*
  * __put_user_unaligned: - Write a simple value into user space, with less checking.
- * @x:   Value to copy to user space.
+ * @x:	 Value to copy to user space.
  * @ptr: Destination address, in user space.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * This macro copies a single simple value from kernel space to user
  * space.  It supports simple types like char and int, but not larger
@@ -451,10 +451,10 @@
 
 /*
  * __get_user_unaligned: - Get a simple variable from user space, with less checking.
- * @x:   Variable to store result.
+ * @x:	 Variable to store result.
  * @ptr: Source address, in user space.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * This macro copies a single simple variable from user space to kernel
  * space.  It supports simple types like char and int, but not larger
@@ -543,7 +543,7 @@
  */
 #define __get_user_unaligned_asm_ll32(val, addr)			\
 {									\
-        unsigned long long __gu_tmp;					\
+	unsigned long long __gu_tmp;					\
 									\
 	__asm__ __volatile__(						\
 	"1:	ulw	%1, (%3)				\n"	\
@@ -631,7 +631,7 @@
 #define __put_user_unaligned_asm_ll32(ptr)				\
 {									\
 	__asm__ __volatile__(						\
-	"1:	sw	%2, (%3)	# __put_user_unaligned_asm_ll32	\n" \
+	"1:	sw	%2, (%3)	# __put_user_unaligned_asm_ll32 \n" \
 	"2:	sw	%D2, 4(%3)				\n"	\
 	"3:							\n"	\
 	"	.section	.fixup,\"ax\"			\n"	\
@@ -658,7 +658,7 @@
 #ifdef MODULE
 #define __MODULE_JAL(destination)					\
 	".set\tnoat\n\t"						\
-	__UA_LA "\t$1, " #destination "\n\t" 				\
+	__UA_LA "\t$1, " #destination "\n\t"				\
 	"jalr\t$1\n\t"							\
 	".set\tat\n\t"
 #else
@@ -694,11 +694,11 @@
 
 /*
  * __copy_to_user: - Copy a block of data into user space, with less checking.
- * @to:   Destination address, in user space.
+ * @to:	  Destination address, in user space.
  * @from: Source address, in kernel space.
- * @n:    Number of bytes to copy.
+ * @n:	  Number of bytes to copy.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * Copy data from kernel space to user space.  Caller must check
  * the specified block with access_ok() before calling this function.
@@ -716,7 +716,7 @@
 	__cu_from = (from);						\
 	__cu_len = (n);							\
 	might_fault();							\
-	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len);	\
+	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \
 	__cu_len;							\
 })
 
@@ -731,7 +731,7 @@
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len);	\
+	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \
 	__cu_len;							\
 })
 
@@ -744,18 +744,18 @@
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	__cu_len = __invoke_copy_from_user_inatomic(__cu_to, __cu_from,	\
-	                                            __cu_len);		\
+	__cu_len = __invoke_copy_from_user_inatomic(__cu_to, __cu_from, \
+						    __cu_len);		\
 	__cu_len;							\
 })
 
 /*
  * copy_to_user: - Copy a block of data into user space.
- * @to:   Destination address, in user space.
+ * @to:	  Destination address, in user space.
  * @from: Source address, in kernel space.
- * @n:    Number of bytes to copy.
+ * @n:	  Number of bytes to copy.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * Copy data from kernel space to user space.
  *
@@ -774,7 +774,7 @@
 	if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) {		\
 		might_fault();						\
 		__cu_len = __invoke_copy_to_user(__cu_to, __cu_from,	\
-		                                 __cu_len);		\
+						 __cu_len);		\
 	}								\
 	__cu_len;							\
 })
@@ -827,11 +827,11 @@
 
 /*
  * __copy_from_user: - Copy a block of data from user space, with less checking.
- * @to:   Destination address, in kernel space.
+ * @to:	  Destination address, in kernel space.
  * @from: Source address, in user space.
- * @n:    Number of bytes to copy.
+ * @n:	  Number of bytes to copy.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * Copy data from user space to kernel space.  Caller must check
  * the specified block with access_ok() before calling this function.
@@ -853,17 +853,17 @@
 	__cu_len = (n);							\
 	might_fault();							\
 	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
-	                                   __cu_len);			\
+					   __cu_len);			\
 	__cu_len;							\
 })
 
 /*
  * copy_from_user: - Copy a block of data from user space.
- * @to:   Destination address, in kernel space.
+ * @to:	  Destination address, in kernel space.
  * @from: Source address, in user space.
- * @n:    Number of bytes to copy.
+ * @n:	  Number of bytes to copy.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * Copy data from user space to kernel space.
  *
@@ -885,7 +885,7 @@
 	if (access_ok(VERIFY_READ, __cu_from, __cu_len)) {		\
 		might_fault();						\
 		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
-		                                   __cu_len);		\
+						   __cu_len);		\
 	}								\
 	__cu_len;							\
 })
@@ -901,7 +901,7 @@
 	__cu_len = (n);							\
 	might_fault();							\
 	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
-	                                   __cu_len);			\
+					   __cu_len);			\
 	__cu_len;							\
 })
 
@@ -915,18 +915,18 @@
 	__cu_from = (from);						\
 	__cu_len = (n);							\
 	if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) &&	\
-	           access_ok(VERIFY_WRITE, __cu_to, __cu_len))) {	\
+		   access_ok(VERIFY_WRITE, __cu_to, __cu_len))) {	\
 		might_fault();						\
 		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
-		                                   __cu_len);		\
+						   __cu_len);		\
 	}								\
 	__cu_len;							\
 })
 
 /*
  * __clear_user: - Zero a block of memory in user space, with less checking.
- * @to:   Destination address, in user space.
- * @n:    Number of bytes to zero.
+ * @to:	  Destination address, in user space.
+ * @n:	  Number of bytes to zero.
  *
  * Zero a block of memory in user space.  Caller must check
  * the specified block with access_ok() before calling this function.
@@ -966,7 +966,7 @@
 /*
  * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking.
  * @dst:   Destination address, in kernel space.  This buffer must be at
- *         least @count bytes long.
+ *	   least @count bytes long.
  * @src:   Source address, in user space.
  * @count: Maximum number of bytes to copy, including the trailing NUL.
  *
@@ -1005,7 +1005,7 @@
 /*
  * strncpy_from_user: - Copy a NUL terminated string from userspace.
  * @dst:   Destination address, in kernel space.  This buffer must be at
- *         least @count bytes long.
+ *	   least @count bytes long.
  * @src:   Source address, in user space.
  * @count: Maximum number of bytes to copy, including the trailing NUL.
  *
@@ -1060,7 +1060,7 @@
  * strlen_user: - Get the size of a string in user space.
  * @str: The string to measure.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * Get the size of a NUL-terminated string in user space.
  *
@@ -1108,7 +1108,7 @@
  * strlen_user: - Get the size of a string in user space.
  * @str: The string to measure.
  *
- * Context: User context only.  This function may sleep.
+ * Context: User context only.	This function may sleep.
  *
  * Get the size of a NUL-terminated string in user space.
  *
diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h
index 7e0bf17..058e941 100644
--- a/arch/mips/include/asm/uasm.h
+++ b/arch/mips/include/asm/uasm.h
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2004, 2005, 2006, 2008  Thiemo Seufer
+ * Copyright (C) 2004, 2005, 2006, 2008	 Thiemo Seufer
  * Copyright (C) 2005  Maciej W. Rozycki
  * Copyright (C) 2006  Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 2012  MIPS Technologies, Inc.
diff --git a/arch/mips/include/asm/user.h b/arch/mips/include/asm/user.h
index afa83a4..6bad61b 100644
--- a/arch/mips/include/asm/user.h
+++ b/arch/mips/include/asm/user.h
@@ -20,7 +20,7 @@
  *  upage: 1 page consisting of a user struct that tells gdb
  *	what is present in the file.  Directly after this is a
  *	copy of the task_struct, which is currently not used by gdb,
- *	but it may come in handy at some point.  All of the registers
+ *	but it may come in handy at some point.	 All of the registers
  *	are stored as part of the upage.  The upage should always be
  *	only one page long.
  *  data: The data segment follows next.  We use current->end_text to
diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h
index c231a3d..a866918 100644
--- a/arch/mips/include/asm/vr41xx/pci.h
+++ b/arch/mips/include/asm/vr41xx/pci.h
@@ -20,7 +20,7 @@
 #ifndef __NEC_VR41XX_PCI_H
 #define __NEC_VR41XX_PCI_H
 
-#define PCI_MASTER_ADDRESS_MASK	0x7fffffffU
+#define PCI_MASTER_ADDRESS_MASK 0x7fffffffU
 
 struct pci_master_address_conversion {
 	uint32_t bus_base_address;
diff --git a/arch/mips/include/asm/vr41xx/tb0287.h b/arch/mips/include/asm/vr41xx/tb0287.h
index 61bead6..d58b567 100644
--- a/arch/mips/include/asm/vr41xx/tb0287.h
+++ b/arch/mips/include/asm/vr41xx/tb0287.h
@@ -1,7 +1,7 @@
 /*
  *  tb0287.h, Include file for TANBAC TB0287 mini-ITX board.
  *
- *  Copyright (C) 2005  Media Lab Inc. <ito@mlb.co.jp>
+ *  Copyright (C) 2005	Media Lab Inc. <ito@mlb.co.jp>
  *
  *  This code is largely based on tb0219.h.
  *
diff --git a/arch/mips/include/asm/war.h b/arch/mips/include/asm/war.h
index 65e3445..9344e24 100644
--- a/arch/mips/include/asm/war.h
+++ b/arch/mips/include/asm/war.h
@@ -83,30 +83,30 @@
 #endif
 
 /*
- * Pleasures of the R4600 V1.x.  Cite from the IDT R4600 V1.7 errata:
+ * Pleasures of the R4600 V1.x.	 Cite from the IDT R4600 V1.7 errata:
  *
  *  18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D,
- *      Hit_Invalidate_D and Create_Dirty_Excl_D should only be
- *      executed if there is no other dcache activity. If the dcache is
- *      accessed for another instruction immeidately preceding when these
- *      cache instructions are executing, it is possible that the dcache
- *      tag match outputs used by these cache instructions will be
- *      incorrect. These cache instructions should be preceded by at least
- *      four instructions that are not any kind of load or store
- *      instruction.
+ *	Hit_Invalidate_D and Create_Dirty_Excl_D should only be
+ *	executed if there is no other dcache activity. If the dcache is
+ *	accessed for another instruction immeidately preceding when these
+ *	cache instructions are executing, it is possible that the dcache
+ *	tag match outputs used by these cache instructions will be
+ *	incorrect. These cache instructions should be preceded by at least
+ *	four instructions that are not any kind of load or store
+ *	instruction.
  *
- *      This is not allowed:    lw
- *                              nop
- *                              nop
- *                              nop
- *                              cache       Hit_Writeback_Invalidate_D
+ *	This is not allowed:	lw
+ *				nop
+ *				nop
+ *				nop
+ *				cache	    Hit_Writeback_Invalidate_D
  *
- *      This is allowed:        lw
- *                              nop
- *                              nop
- *                              nop
- *                              nop
- *                              cache       Hit_Writeback_Invalidate_D
+ *	This is allowed:	lw
+ *				nop
+ *				nop
+ *				nop
+ *				nop
+ *				cache	    Hit_Writeback_Invalidate_D
  */
 #ifndef R4600_V1_HIT_CACHEOP_WAR
 #error Check setting of R4600_V1_HIT_CACHEOP_WAR for your platform
@@ -118,7 +118,7 @@
  *
  * R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
  * Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
- * operate correctly if the internal data cache refill buffer is empty.  These
+ * operate correctly if the internal data cache refill buffer is empty.	 These
  * CACHE instructions should be separated from any potential data cache miss
  * by a load instruction to an uncached address to empty the response buffer."
  * (Revision 2.0 device errata from IDT available on http://www.idt.com/
diff --git a/arch/mips/include/asm/xtalk/xtalk.h b/arch/mips/include/asm/xtalk/xtalk.h
index 79bac88..680e7ef 100644
--- a/arch/mips/include/asm/xtalk/xtalk.h
+++ b/arch/mips/include/asm/xtalk/xtalk.h
@@ -16,15 +16,15 @@
 /*
  * User-level device driver visible types
  */
-typedef char            xwidgetnum_t;	/* xtalk widget number  (0..15) */
+typedef char		xwidgetnum_t;	/* xtalk widget number	(0..15) */
 
 #define XWIDGET_NONE		-1
 
-typedef int xwidget_part_num_t;	/* xtalk widget part number */
+typedef int xwidget_part_num_t; /* xtalk widget part number */
 
 #define XWIDGET_PART_NUM_NONE	-1
 
-typedef int             xwidget_rev_num_t;	/* xtalk widget revision number */
+typedef int		xwidget_rev_num_t;	/* xtalk widget revision number */
 
 #define XWIDGET_REV_NUM_NONE	-1
 
@@ -37,15 +37,15 @@
 /* It is often convenient to fold the XIO target port
  * number into the XIO address.
  */
-#define	XIO_NOWHERE	(0xFFFFFFFFFFFFFFFFull)
-#define	XIO_ADDR_BITS	(0x0000FFFFFFFFFFFFull)
-#define	XIO_PORT_BITS	(0xF000000000000000ull)
-#define	XIO_PORT_SHIFT	(60)
+#define XIO_NOWHERE	(0xFFFFFFFFFFFFFFFFull)
+#define XIO_ADDR_BITS	(0x0000FFFFFFFFFFFFull)
+#define XIO_PORT_BITS	(0xF000000000000000ull)
+#define XIO_PORT_SHIFT	(60)
 
-#define	XIO_PACKED(x)	(((x)&XIO_PORT_BITS) != 0)
-#define	XIO_ADDR(x)	((x)&XIO_ADDR_BITS)
-#define	XIO_PORT(x)	((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT))
-#define	XIO_PACK(p, o)	((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS))
+#define XIO_PACKED(x)	(((x)&XIO_PORT_BITS) != 0)
+#define XIO_ADDR(x)	((x)&XIO_ADDR_BITS)
+#define XIO_PORT(x)	((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT))
+#define XIO_PACK(p, o)	((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS))
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/mips/include/asm/xtalk/xwidget.h b/arch/mips/include/asm/xtalk/xwidget.h
index b4a13d7..32e4e88 100644
--- a/arch/mips/include/asm/xtalk/xwidget.h
+++ b/arch/mips/include/asm/xtalk/xwidget.h
@@ -45,12 +45,12 @@
 #define WIDGET_PENDING			0x0000001f
 
 /* WIDGET_ERR_UPPER_ADDR */
-#define	WIDGET_ERR_UPPER_ADDR_ONLY	0x0000ffff
+#define WIDGET_ERR_UPPER_ADDR_ONLY	0x0000ffff
 
 /* WIDGET_CONTROL */
 #define WIDGET_F_BAD_PKT		0x00010000
 #define WIDGET_LLP_XBAR_CRD		0x0000f000
-#define	WIDGET_LLP_XBAR_CRD_SHFT	12
+#define WIDGET_LLP_XBAR_CRD_SHFT	12
 #define WIDGET_CLR_RLLP_CNT		0x00000800
 #define WIDGET_CLR_TLLP_CNT		0x00000400
 #define WIDGET_SYS_END			0x00000200
@@ -86,8 +86,8 @@
 
 /*
  * according to the crosstalk spec, only 32-bits access to the widget
- * configuration registers is allowed.  some widgets may allow 64-bits
- * access but software should not depend on it.  registers beyond the
+ * configuration registers is allowed.	some widgets may allow 64-bits
+ * access but software should not depend on it.	 registers beyond the
  * widget target flush register are widget dependent thus will not be
  * defined here
  */
diff --git a/arch/mips/include/uapi/asm/Kbuild b/arch/mips/include/uapi/asm/Kbuild
index 77d4fb3..350cccc 100644
--- a/arch/mips/include/uapi/asm/Kbuild
+++ b/arch/mips/include/uapi/asm/Kbuild
@@ -8,6 +8,7 @@
 header-y += cachectl.h
 header-y += errno.h
 header-y += fcntl.h
+header-y += inst.h
 header-y += ioctl.h
 header-y += ioctls.h
 header-y += ipcbuf.h
diff --git a/arch/mips/include/uapi/asm/break.h b/arch/mips/include/uapi/asm/break.h
index 9161e684..002c39e 100644
--- a/arch/mips/include/uapi/asm/break.h
+++ b/arch/mips/include/uapi/asm/break.h
@@ -6,8 +6,8 @@
  * Copyright (C) 1995, 2003 by Ralf Baechle
  * Copyright (C) 1999 Silicon Graphics, Inc.
  */
-#ifndef __ASM_BREAK_H
-#define __ASM_BREAK_H
+#ifndef __UAPI_ASM_BREAK_H
+#define __UAPI_ASM_BREAK_H
 
 /*
  * The following break codes are or were in use for specific purposes in
@@ -16,22 +16,14 @@
  * non-Linux/MIPS object files or make use of them in the future.
  */
 #define BRK_USERBP	0	/* User bp (used by debuggers) */
-#define BRK_KERNELBP	1	/* Break in the kernel */
-#define BRK_ABORT	2	/* Sometimes used by abort(3) to SIGIOT */
-#define BRK_BD_TAKEN	3	/* For bd slot emulation - not implemented */
-#define BRK_BD_NOTTAKEN	4	/* For bd slot emulation - not implemented */
 #define BRK_SSTEPBP	5	/* User bp (used by debuggers) */
 #define BRK_OVERFLOW	6	/* Overflow check */
 #define BRK_DIVZERO	7	/* Divide by zero check */
 #define BRK_RANGE	8	/* Range error check */
-#define BRK_STACKOVERFLOW 9	/* For Ada stackchecking */
-#define BRK_NORLD	10	/* No rld found - not used by Linux/MIPS */
-#define _BRK_THREADBP	11	/* For threads, user bp (used by debuggers) */
-#define BRK_BUG		512	/* Used by BUG() */
-#define BRK_KDB		513	/* Used in KDB_ENTER() */
+#define BRK_BUG		12	/* Used by BUG() */
 #define BRK_MEMU	514	/* Used by FPU emulator */
 #define BRK_KPROBE_BP	515	/* Kprobe break */
 #define BRK_KPROBE_SSTEPBP 516	/* Kprobe single step software implementation */
 #define BRK_MULOVF	1023	/* Multiply overflow */
 
-#endif /* __ASM_BREAK_H */
+#endif /* __UAPI_ASM_BREAK_H */
diff --git a/arch/mips/include/uapi/asm/cachectl.h b/arch/mips/include/uapi/asm/cachectl.h
index f3ce721..2303909 100644
--- a/arch/mips/include/uapi/asm/cachectl.h
+++ b/arch/mips/include/uapi/asm/cachectl.h
@@ -5,15 +5,15 @@
  *
  * Copyright (C) 1994, 1995, 1996 by Ralf Baechle
  */
-#ifndef	_ASM_CACHECTL
-#define	_ASM_CACHECTL
+#ifndef _ASM_CACHECTL
+#define _ASM_CACHECTL
 
 /*
  * Options for cacheflush system call
  */
-#define	ICACHE	(1<<0)		/* flush instruction cache        */
-#define	DCACHE	(1<<1)		/* writeback and flush data cache */
-#define	BCACHE	(ICACHE|DCACHE)	/* flush both caches              */
+#define ICACHE	(1<<0)		/* flush instruction cache	  */
+#define DCACHE	(1<<1)		/* writeback and flush data cache */
+#define BCACHE	(ICACHE|DCACHE) /* flush both caches		  */
 
 /*
  * Caching modes for the cachectl(2) call
diff --git a/arch/mips/include/uapi/asm/errno.h b/arch/mips/include/uapi/asm/errno.h
index bd67b150..31575e2f 100644
--- a/arch/mips/include/uapi/asm/errno.h
+++ b/arch/mips/include/uapi/asm/errno.h
@@ -14,95 +14,95 @@
 
 #include <asm-generic/errno-base.h>
 
-#define	ENOMSG		35	/* No message of desired type */
-#define	EIDRM		36	/* Identifier removed */
-#define	ECHRNG		37	/* Channel number out of range */
-#define	EL2NSYNC	38	/* Level 2 not synchronized */
-#define	EL3HLT		39	/* Level 3 halted */
-#define	EL3RST		40	/* Level 3 reset */
-#define	ELNRNG		41	/* Link number out of range */
-#define	EUNATCH		42	/* Protocol driver not attached */
-#define	ENOCSI		43	/* No CSI structure available */
-#define	EL2HLT		44	/* Level 2 halted */
-#define	EDEADLK		45	/* Resource deadlock would occur */
-#define	ENOLCK		46	/* No record locks available */
-#define	EBADE		50	/* Invalid exchange */
-#define	EBADR		51	/* Invalid request descriptor */
-#define	EXFULL		52	/* Exchange full */
-#define	ENOANO		53	/* No anode */
-#define	EBADRQC		54	/* Invalid request code */
-#define	EBADSLT		55	/* Invalid slot */
-#define	EDEADLOCK	56	/* File locking deadlock error */
-#define	EBFONT		59	/* Bad font file format */
-#define	ENOSTR		60	/* Device not a stream */
-#define	ENODATA		61	/* No data available */
-#define	ETIME		62	/* Timer expired */
-#define	ENOSR		63	/* Out of streams resources */
-#define	ENONET		64	/* Machine is not on the network */
-#define	ENOPKG		65	/* Package not installed */
-#define	EREMOTE		66	/* Object is remote */
-#define	ENOLINK		67	/* Link has been severed */
-#define	EADV		68	/* Advertise error */
-#define	ESRMNT		69	/* Srmount error */
-#define	ECOMM		70	/* Communication error on send */
-#define	EPROTO		71	/* Protocol error */
-#define	EDOTDOT		73	/* RFS specific error */
-#define	EMULTIHOP	74	/* Multihop attempted */
-#define	EBADMSG		77	/* Not a data message */
-#define	ENAMETOOLONG	78	/* File name too long */
-#define	EOVERFLOW	79	/* Value too large for defined data type */
-#define	ENOTUNIQ	80	/* Name not unique on network */
-#define	EBADFD		81	/* File descriptor in bad state */
-#define	EREMCHG		82	/* Remote address changed */
-#define	ELIBACC		83	/* Can not access a needed shared library */
-#define	ELIBBAD		84	/* Accessing a corrupted shared library */
-#define	ELIBSCN		85	/* .lib section in a.out corrupted */
-#define	ELIBMAX		86	/* Attempting to link in too many shared libraries */
-#define	ELIBEXEC	87	/* Cannot exec a shared library directly */
-#define	EILSEQ		88	/* Illegal byte sequence */
-#define	ENOSYS		89	/* Function not implemented */
-#define	ELOOP		90	/* Too many symbolic links encountered */
-#define	ERESTART	91	/* Interrupted system call should be restarted */
-#define	ESTRPIPE	92	/* Streams pipe error */
-#define	ENOTEMPTY	93	/* Directory not empty */
-#define	EUSERS		94	/* Too many users */
-#define	ENOTSOCK	95	/* Socket operation on non-socket */
-#define	EDESTADDRREQ	96	/* Destination address required */
-#define	EMSGSIZE	97	/* Message too long */
-#define	EPROTOTYPE	98	/* Protocol wrong type for socket */
-#define	ENOPROTOOPT	99	/* Protocol not available */
-#define	EPROTONOSUPPORT	120	/* Protocol not supported */
-#define	ESOCKTNOSUPPORT	121	/* Socket type not supported */
-#define	EOPNOTSUPP	122	/* Operation not supported on transport endpoint */
-#define	EPFNOSUPPORT	123	/* Protocol family not supported */
-#define	EAFNOSUPPORT	124	/* Address family not supported by protocol */
-#define	EADDRINUSE	125	/* Address already in use */
-#define	EADDRNOTAVAIL	126	/* Cannot assign requested address */
-#define	ENETDOWN	127	/* Network is down */
-#define	ENETUNREACH	128	/* Network is unreachable */
-#define	ENETRESET	129	/* Network dropped connection because of reset */
-#define	ECONNABORTED	130	/* Software caused connection abort */
-#define	ECONNRESET	131	/* Connection reset by peer */
-#define	ENOBUFS		132	/* No buffer space available */
-#define	EISCONN		133	/* Transport endpoint is already connected */
-#define	ENOTCONN	134	/* Transport endpoint is not connected */
-#define	EUCLEAN		135	/* Structure needs cleaning */
-#define	ENOTNAM		137	/* Not a XENIX named type file */
-#define	ENAVAIL		138	/* No XENIX semaphores available */
-#define	EISNAM		139	/* Is a named type file */
-#define	EREMOTEIO	140	/* Remote I/O error */
+#define ENOMSG		35	/* No message of desired type */
+#define EIDRM		36	/* Identifier removed */
+#define ECHRNG		37	/* Channel number out of range */
+#define EL2NSYNC	38	/* Level 2 not synchronized */
+#define EL3HLT		39	/* Level 3 halted */
+#define EL3RST		40	/* Level 3 reset */
+#define ELNRNG		41	/* Link number out of range */
+#define EUNATCH		42	/* Protocol driver not attached */
+#define ENOCSI		43	/* No CSI structure available */
+#define EL2HLT		44	/* Level 2 halted */
+#define EDEADLK		45	/* Resource deadlock would occur */
+#define ENOLCK		46	/* No record locks available */
+#define EBADE		50	/* Invalid exchange */
+#define EBADR		51	/* Invalid request descriptor */
+#define EXFULL		52	/* Exchange full */
+#define ENOANO		53	/* No anode */
+#define EBADRQC		54	/* Invalid request code */
+#define EBADSLT		55	/* Invalid slot */
+#define EDEADLOCK	56	/* File locking deadlock error */
+#define EBFONT		59	/* Bad font file format */
+#define ENOSTR		60	/* Device not a stream */
+#define ENODATA		61	/* No data available */
+#define ETIME		62	/* Timer expired */
+#define ENOSR		63	/* Out of streams resources */
+#define ENONET		64	/* Machine is not on the network */
+#define ENOPKG		65	/* Package not installed */
+#define EREMOTE		66	/* Object is remote */
+#define ENOLINK		67	/* Link has been severed */
+#define EADV		68	/* Advertise error */
+#define ESRMNT		69	/* Srmount error */
+#define ECOMM		70	/* Communication error on send */
+#define EPROTO		71	/* Protocol error */
+#define EDOTDOT		73	/* RFS specific error */
+#define EMULTIHOP	74	/* Multihop attempted */
+#define EBADMSG		77	/* Not a data message */
+#define ENAMETOOLONG	78	/* File name too long */
+#define EOVERFLOW	79	/* Value too large for defined data type */
+#define ENOTUNIQ	80	/* Name not unique on network */
+#define EBADFD		81	/* File descriptor in bad state */
+#define EREMCHG		82	/* Remote address changed */
+#define ELIBACC		83	/* Can not access a needed shared library */
+#define ELIBBAD		84	/* Accessing a corrupted shared library */
+#define ELIBSCN		85	/* .lib section in a.out corrupted */
+#define ELIBMAX		86	/* Attempting to link in too many shared libraries */
+#define ELIBEXEC	87	/* Cannot exec a shared library directly */
+#define EILSEQ		88	/* Illegal byte sequence */
+#define ENOSYS		89	/* Function not implemented */
+#define ELOOP		90	/* Too many symbolic links encountered */
+#define ERESTART	91	/* Interrupted system call should be restarted */
+#define ESTRPIPE	92	/* Streams pipe error */
+#define ENOTEMPTY	93	/* Directory not empty */
+#define EUSERS		94	/* Too many users */
+#define ENOTSOCK	95	/* Socket operation on non-socket */
+#define EDESTADDRREQ	96	/* Destination address required */
+#define EMSGSIZE	97	/* Message too long */
+#define EPROTOTYPE	98	/* Protocol wrong type for socket */
+#define ENOPROTOOPT	99	/* Protocol not available */
+#define EPROTONOSUPPORT 120	/* Protocol not supported */
+#define ESOCKTNOSUPPORT 121	/* Socket type not supported */
+#define EOPNOTSUPP	122	/* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT	123	/* Protocol family not supported */
+#define EAFNOSUPPORT	124	/* Address family not supported by protocol */
+#define EADDRINUSE	125	/* Address already in use */
+#define EADDRNOTAVAIL	126	/* Cannot assign requested address */
+#define ENETDOWN	127	/* Network is down */
+#define ENETUNREACH	128	/* Network is unreachable */
+#define ENETRESET	129	/* Network dropped connection because of reset */
+#define ECONNABORTED	130	/* Software caused connection abort */
+#define ECONNRESET	131	/* Connection reset by peer */
+#define ENOBUFS		132	/* No buffer space available */
+#define EISCONN		133	/* Transport endpoint is already connected */
+#define ENOTCONN	134	/* Transport endpoint is not connected */
+#define EUCLEAN		135	/* Structure needs cleaning */
+#define ENOTNAM		137	/* Not a XENIX named type file */
+#define ENAVAIL		138	/* No XENIX semaphores available */
+#define EISNAM		139	/* Is a named type file */
+#define EREMOTEIO	140	/* Remote I/O error */
 #define EINIT		141	/* Reserved */
 #define EREMDEV		142	/* Error 142 */
-#define	ESHUTDOWN	143	/* Cannot send after transport endpoint shutdown */
-#define	ETOOMANYREFS	144	/* Too many references: cannot splice */
-#define	ETIMEDOUT	145	/* Connection timed out */
-#define	ECONNREFUSED	146	/* Connection refused */
-#define	EHOSTDOWN	147	/* Host is down */
-#define	EHOSTUNREACH	148	/* No route to host */
-#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
-#define	EALREADY	149	/* Operation already in progress */
-#define	EINPROGRESS	150	/* Operation now in progress */
-#define	ESTALE		151	/* Stale NFS file handle */
+#define ESHUTDOWN	143	/* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS	144	/* Too many references: cannot splice */
+#define ETIMEDOUT	145	/* Connection timed out */
+#define ECONNREFUSED	146	/* Connection refused */
+#define EHOSTDOWN	147	/* Host is down */
+#define EHOSTUNREACH	148	/* No route to host */
+#define EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define EALREADY	149	/* Operation already in progress */
+#define EINPROGRESS	150	/* Operation now in progress */
+#define ESTALE		151	/* Stale NFS file handle */
 #define ECANCELED	158	/* AIO operation canceled */
 
 /*
@@ -110,16 +110,16 @@
  */
 #define ENOMEDIUM	159	/* No medium found */
 #define EMEDIUMTYPE	160	/* Wrong medium type */
-#define	ENOKEY		161	/* Required key not available */
-#define	EKEYEXPIRED	162	/* Key has expired */
-#define	EKEYREVOKED	163	/* Key has been revoked */
-#define	EKEYREJECTED	164	/* Key was rejected by service */
+#define ENOKEY		161	/* Required key not available */
+#define EKEYEXPIRED	162	/* Key has expired */
+#define EKEYREVOKED	163	/* Key has been revoked */
+#define EKEYREJECTED	164	/* Key was rejected by service */
 
 /* for robust mutexes */
-#define	EOWNERDEAD	165	/* Owner died */
-#define	ENOTRECOVERABLE	166	/* State not recoverable */
+#define EOWNERDEAD	165	/* Owner died */
+#define ENOTRECOVERABLE 166	/* State not recoverable */
 
-#define	ERFKILL		167	/* Operation not possible due to RF-kill */
+#define ERFKILL		167	/* Operation not possible due to RF-kill */
 
 #define EHWPOISON	168	/* Memory page has hardware error */
 
diff --git a/arch/mips/include/uapi/asm/fcntl.h b/arch/mips/include/uapi/asm/fcntl.h
index 75edded..0bda78f 100644
--- a/arch/mips/include/uapi/asm/fcntl.h
+++ b/arch/mips/include/uapi/asm/fcntl.h
@@ -12,7 +12,7 @@
 #define O_APPEND	0x0008
 #define O_DSYNC		0x0010	/* used to be O_SYNC, see below */
 #define O_NONBLOCK	0x0080
-#define O_CREAT         0x0100	/* not fcntl */
+#define O_CREAT		0x0100	/* not fcntl */
 #define O_TRUNC		0x0200	/* not fcntl */
 #define O_EXCL		0x0400	/* not fcntl */
 #define O_NOCTTY	0x0800	/* not fcntl */
@@ -50,7 +50,7 @@
 
 /*
  * The flavours of struct flock.  "struct flock" is the ABI compliant
- * variant.  Finally struct flock64 is the LFS variant of struct flock.  As
+ * variant.  Finally struct flock64 is the LFS variant of struct flock.	 As
  * a historic accident and inconsistence with the ABI definition it doesn't
  * contain all the same fields as struct flock.
  */
diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h
new file mode 100644
index 0000000..4d07881
--- /dev/null
+++ b/arch/mips/include/uapi/asm/inst.h
@@ -0,0 +1,331 @@
+/*
+ * Format of an instruction in memory.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 2000 by Ralf Baechle
+ * Copyright (C) 2006 by Thiemo Seufer
+ */
+#ifndef _UAPI_ASM_INST_H
+#define _UAPI_ASM_INST_H
+
+/*
+ * Major opcodes; before MIPS IV cop1x was called cop3.
+ */
+enum major_op {
+	spec_op, bcond_op, j_op, jal_op,
+	beq_op, bne_op, blez_op, bgtz_op,
+	addi_op, addiu_op, slti_op, sltiu_op,
+	andi_op, ori_op, xori_op, lui_op,
+	cop0_op, cop1_op, cop2_op, cop1x_op,
+	beql_op, bnel_op, blezl_op, bgtzl_op,
+	daddi_op, daddiu_op, ldl_op, ldr_op,
+	spec2_op, jalx_op, mdmx_op, spec3_op,
+	lb_op, lh_op, lwl_op, lw_op,
+	lbu_op, lhu_op, lwr_op, lwu_op,
+	sb_op, sh_op, swl_op, sw_op,
+	sdl_op, sdr_op, swr_op, cache_op,
+	ll_op, lwc1_op, lwc2_op, pref_op,
+	lld_op, ldc1_op, ldc2_op, ld_op,
+	sc_op, swc1_op, swc2_op, major_3b_op,
+	scd_op, sdc1_op, sdc2_op, sd_op
+};
+
+/*
+ * func field of spec opcode.
+ */
+enum spec_op {
+	sll_op, movc_op, srl_op, sra_op,
+	sllv_op, pmon_op, srlv_op, srav_op,
+	jr_op, jalr_op, movz_op, movn_op,
+	syscall_op, break_op, spim_op, sync_op,
+	mfhi_op, mthi_op, mflo_op, mtlo_op,
+	dsllv_op, spec2_unused_op, dsrlv_op, dsrav_op,
+	mult_op, multu_op, div_op, divu_op,
+	dmult_op, dmultu_op, ddiv_op, ddivu_op,
+	add_op, addu_op, sub_op, subu_op,
+	and_op, or_op, xor_op, nor_op,
+	spec3_unused_op, spec4_unused_op, slt_op, sltu_op,
+	dadd_op, daddu_op, dsub_op, dsubu_op,
+	tge_op, tgeu_op, tlt_op, tltu_op,
+	teq_op, spec5_unused_op, tne_op, spec6_unused_op,
+	dsll_op, spec7_unused_op, dsrl_op, dsra_op,
+	dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op
+};
+
+/*
+ * func field of spec2 opcode.
+ */
+enum spec2_op {
+	madd_op, maddu_op, mul_op, spec2_3_unused_op,
+	msub_op, msubu_op, /* more unused ops */
+	clz_op = 0x20, clo_op,
+	dclz_op = 0x24, dclo_op,
+	sdbpp_op = 0x3f
+};
+
+/*
+ * func field of spec3 opcode.
+ */
+enum spec3_op {
+	ext_op, dextm_op, dextu_op, dext_op,
+	ins_op, dinsm_op, dinsu_op, dins_op,
+	lx_op = 0x0a,
+	bshfl_op = 0x20,
+	dbshfl_op = 0x24,
+	rdhwr_op = 0x3b
+};
+
+/*
+ * rt field of bcond opcodes.
+ */
+enum rt_op {
+	bltz_op, bgez_op, bltzl_op, bgezl_op,
+	spimi_op, unused_rt_op_0x05, unused_rt_op_0x06, unused_rt_op_0x07,
+	tgei_op, tgeiu_op, tlti_op, tltiu_op,
+	teqi_op, unused_0x0d_rt_op, tnei_op, unused_0x0f_rt_op,
+	bltzal_op, bgezal_op, bltzall_op, bgezall_op,
+	rt_op_0x14, rt_op_0x15, rt_op_0x16, rt_op_0x17,
+	rt_op_0x18, rt_op_0x19, rt_op_0x1a, rt_op_0x1b,
+	bposge32_op, rt_op_0x1d, rt_op_0x1e, rt_op_0x1f
+};
+
+/*
+ * rs field of cop opcodes.
+ */
+enum cop_op {
+	mfc_op	      = 0x00, dmfc_op	    = 0x01,
+	cfc_op	      = 0x02, mtc_op	    = 0x04,
+	dmtc_op	      = 0x05, ctc_op	    = 0x06,
+	bc_op	      = 0x08, cop_op	    = 0x10,
+	copm_op	      = 0x18
+};
+
+/*
+ * rt field of cop.bc_op opcodes
+ */
+enum bcop_op {
+	bcf_op, bct_op, bcfl_op, bctl_op
+};
+
+/*
+ * func field of cop0 coi opcodes.
+ */
+enum cop0_coi_func {
+	tlbr_op	      = 0x01, tlbwi_op	    = 0x02,
+	tlbwr_op      = 0x06, tlbp_op	    = 0x08,
+	rfe_op	      = 0x10, eret_op	    = 0x18
+};
+
+/*
+ * func field of cop0 com opcodes.
+ */
+enum cop0_com_func {
+	tlbr1_op      = 0x01, tlbw_op	    = 0x02,
+	tlbp1_op      = 0x08, dctr_op	    = 0x09,
+	dctw_op	      = 0x0a
+};
+
+/*
+ * fmt field of cop1 opcodes.
+ */
+enum cop1_fmt {
+	s_fmt, d_fmt, e_fmt, q_fmt,
+	w_fmt, l_fmt
+};
+
+/*
+ * func field of cop1 instructions using d, s or w format.
+ */
+enum cop1_sdw_func {
+	fadd_op	     =	0x00, fsub_op	   =  0x01,
+	fmul_op	     =	0x02, fdiv_op	   =  0x03,
+	fsqrt_op     =	0x04, fabs_op	   =  0x05,
+	fmov_op	     =	0x06, fneg_op	   =  0x07,
+	froundl_op   =	0x08, ftruncl_op   =  0x09,
+	fceill_op    =	0x0a, ffloorl_op   =  0x0b,
+	fround_op    =	0x0c, ftrunc_op	   =  0x0d,
+	fceil_op     =	0x0e, ffloor_op	   =  0x0f,
+	fmovc_op     =	0x11, fmovz_op	   =  0x12,
+	fmovn_op     =	0x13, frecip_op	   =  0x15,
+	frsqrt_op    =	0x16, fcvts_op	   =  0x20,
+	fcvtd_op     =	0x21, fcvte_op	   =  0x22,
+	fcvtw_op     =	0x24, fcvtl_op	   =  0x25,
+	fcmp_op	     =	0x30
+};
+
+/*
+ * func field of cop1x opcodes (MIPS IV).
+ */
+enum cop1x_func {
+	lwxc1_op     =	0x00, ldxc1_op	   =  0x01,
+	pfetch_op    =	0x07, swxc1_op	   =  0x08,
+	sdxc1_op     =	0x09, madd_s_op	   =  0x20,
+	madd_d_op    =	0x21, madd_e_op	   =  0x22,
+	msub_s_op    =	0x28, msub_d_op	   =  0x29,
+	msub_e_op    =	0x2a, nmadd_s_op   =  0x30,
+	nmadd_d_op   =	0x31, nmadd_e_op   =  0x32,
+	nmsub_s_op   =	0x38, nmsub_d_op   =  0x39,
+	nmsub_e_op   =	0x3a
+};
+
+/*
+ * func field for mad opcodes (MIPS IV).
+ */
+enum mad_func {
+	madd_fp_op	= 0x08, msub_fp_op	= 0x0a,
+	nmadd_fp_op	= 0x0c, nmsub_fp_op	= 0x0e
+};
+
+/*
+ * func field for special3 lx opcodes (Cavium Octeon).
+ */
+enum lx_func {
+	lwx_op	= 0x00,
+	lhx_op	= 0x04,
+	lbux_op = 0x06,
+	ldx_op	= 0x08,
+	lwux_op = 0x10,
+	lhux_op = 0x14,
+	lbx_op	= 0x16,
+};
+
+/*
+ * Damn ...  bitfields depend from byteorder :-(
+ */
+#ifdef __MIPSEB__
+#define BITFIELD_FIELD(field, more)					\
+	field;								\
+	more
+
+#elif defined(__MIPSEL__)
+
+#define BITFIELD_FIELD(field, more)					\
+	more								\
+	field;
+
+#else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */
+#error "MIPS but neither __MIPSEL__ nor __MIPSEB__?"
+#endif
+
+struct j_format {
+	BITFIELD_FIELD(unsigned int opcode : 6, /* Jump format */
+	BITFIELD_FIELD(unsigned int target : 26,
+	;))
+};
+
+struct i_format {			/* signed immediate format */
+	BITFIELD_FIELD(unsigned int opcode : 6,
+	BITFIELD_FIELD(unsigned int rs : 5,
+	BITFIELD_FIELD(unsigned int rt : 5,
+	BITFIELD_FIELD(signed int simmediate : 16,
+	;))))
+};
+
+struct u_format {			/* unsigned immediate format */
+	BITFIELD_FIELD(unsigned int opcode : 6,
+	BITFIELD_FIELD(unsigned int rs : 5,
+	BITFIELD_FIELD(unsigned int rt : 5,
+	BITFIELD_FIELD(unsigned int uimmediate : 16,
+	;))))
+};
+
+struct c_format {			/* Cache (>= R6000) format */
+	BITFIELD_FIELD(unsigned int opcode : 6,
+	BITFIELD_FIELD(unsigned int rs : 5,
+	BITFIELD_FIELD(unsigned int c_op : 3,
+	BITFIELD_FIELD(unsigned int cache : 2,
+	BITFIELD_FIELD(unsigned int simmediate : 16,
+	;)))))
+};
+
+struct r_format {			/* Register format */
+	BITFIELD_FIELD(unsigned int opcode : 6,
+	BITFIELD_FIELD(unsigned int rs : 5,
+	BITFIELD_FIELD(unsigned int rt : 5,
+	BITFIELD_FIELD(unsigned int rd : 5,
+	BITFIELD_FIELD(unsigned int re : 5,
+	BITFIELD_FIELD(unsigned int func : 6,
+	;))))))
+};
+
+struct p_format {		/* Performance counter format (R10000) */
+	BITFIELD_FIELD(unsigned int opcode : 6,
+	BITFIELD_FIELD(unsigned int rs : 5,
+	BITFIELD_FIELD(unsigned int rt : 5,
+	BITFIELD_FIELD(unsigned int rd : 5,
+	BITFIELD_FIELD(unsigned int re : 5,
+	BITFIELD_FIELD(unsigned int func : 6,
+	;))))))
+};
+
+struct f_format {			/* FPU register format */
+	BITFIELD_FIELD(unsigned int opcode : 6,
+	BITFIELD_FIELD(unsigned int : 1,
+	BITFIELD_FIELD(unsigned int fmt : 4,
+	BITFIELD_FIELD(unsigned int rt : 5,
+	BITFIELD_FIELD(unsigned int rd : 5,
+	BITFIELD_FIELD(unsigned int re : 5,
+	BITFIELD_FIELD(unsigned int func : 6,
+	;)))))))
+};
+
+struct ma_format {		/* FPU multiply and add format (MIPS IV) */
+	BITFIELD_FIELD(unsigned int opcode : 6,
+	BITFIELD_FIELD(unsigned int fr : 5,
+	BITFIELD_FIELD(unsigned int ft : 5,
+	BITFIELD_FIELD(unsigned int fs : 5,
+	BITFIELD_FIELD(unsigned int fd : 5,
+	BITFIELD_FIELD(unsigned int func : 4,
+	BITFIELD_FIELD(unsigned int fmt : 2,
+	;)))))))
+};
+
+struct b_format {			/* BREAK and SYSCALL */
+	BITFIELD_FIELD(unsigned int opcode : 6,
+	BITFIELD_FIELD(unsigned int code : 20,
+	BITFIELD_FIELD(unsigned int func : 6,
+	;)))
+};
+
+struct ps_format {			/* MIPS-3D / paired single format */
+	BITFIELD_FIELD(unsigned int opcode : 6,
+	BITFIELD_FIELD(unsigned int rs : 5,
+	BITFIELD_FIELD(unsigned int ft : 5,
+	BITFIELD_FIELD(unsigned int fs : 5,
+	BITFIELD_FIELD(unsigned int fd : 5,
+	BITFIELD_FIELD(unsigned int func : 6,
+	;))))))
+};
+
+struct v_format {				/* MDMX vector format */
+	BITFIELD_FIELD(unsigned int opcode : 6,
+	BITFIELD_FIELD(unsigned int sel : 4,
+	BITFIELD_FIELD(unsigned int fmt : 1,
+	BITFIELD_FIELD(unsigned int vt : 5,
+	BITFIELD_FIELD(unsigned int vs : 5,
+	BITFIELD_FIELD(unsigned int vd : 5,
+	BITFIELD_FIELD(unsigned int func : 6,
+	;)))))))
+};
+
+union mips_instruction {
+	unsigned int word;
+	unsigned short halfword[2];
+	unsigned char byte[4];
+	struct j_format j_format;
+	struct i_format i_format;
+	struct u_format u_format;
+	struct c_format c_format;
+	struct r_format r_format;
+	struct p_format p_format;
+	struct f_format f_format;
+	struct ma_format ma_format;
+	struct b_format b_format;
+	struct ps_format ps_format;
+	struct v_format v_format;
+};
+
+#endif /* _UAPI_ASM_INST_H */
diff --git a/arch/mips/include/uapi/asm/ioctls.h b/arch/mips/include/uapi/asm/ioctls.h
index addd56b..b1e6377 100644
--- a/arch/mips/include/uapi/asm/ioctls.h
+++ b/arch/mips/include/uapi/asm/ioctls.h
@@ -41,7 +41,7 @@
 #define	 TIOCPKT_START		0x08	/* start output */
 #define	 TIOCPKT_NOSTOP		0x10	/* no more ^S, ^Q */
 #define	 TIOCPKT_DOSTOP		0x20	/* now do ^S ^Q */
-#define  TIOCPKT_IOCTL		0x40	/* state change of pty driver */
+#define	 TIOCPKT_IOCTL		0x40	/* state change of pty driver */
 #define TIOCSWINSZ	_IOW('t', 103, struct winsize)	/* set window size */
 #define TIOCGWINSZ	_IOR('t', 104, struct winsize)	/* get window size */
 #define TIOCNOTTY	0x5471		/* void tty association */
@@ -63,9 +63,9 @@
 #define FIONREAD	0x467f
 #define TIOCINQ		FIONREAD
 
-#define TIOCGETP        0x7408
-#define TIOCSETP        0x7409
-#define TIOCSETN        0x740a			/* TIOCSETP wo flush */
+#define TIOCGETP	0x7408
+#define TIOCSETP	0x7409
+#define TIOCSETN	0x740a			/* TIOCSETP wo flush */
 
 /* #define TIOCSETA	_IOW('t', 20, struct termios) set termios struct */
 /* #define TIOCSETAW	_IOW('t', 21, struct termios) drain output, set */
@@ -74,9 +74,9 @@
 /* #define TIOCSETD	_IOW('t', 27, int)	set line discipline */
 						/* 127-124 compat */
 
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x7416  /* Return the session ID of FD */
+#define TIOCSBRK	0x5427	/* BSD compatibility */
+#define TIOCCBRK	0x5428	/* BSD compatibility */
+#define TIOCGSID	0x7416	/* Return the session ID of FD */
 #define TCGETS2		_IOR('T', 0x2A, struct termios2)
 #define TCSETS2		_IOW('T', 0x2B, struct termios2)
 #define TCSETSW2	_IOW('T', 0x2C, struct termios2)
@@ -104,10 +104,10 @@
 #define TIOCGLCKTRMIOS	0x548b
 #define TIOCSLCKTRMIOS	0x548c
 #define TIOCSERGSTRUCT	0x548d /* For debugging only */
-#define TIOCSERGETLSR   0x548e /* Get line status register */
-#define TIOCSERGETMULTI 0x548f /* Get multiport config  */
+#define TIOCSERGETLSR	0x548e /* Get line status register */
+#define TIOCSERGETMULTI 0x548f /* Get multiport config	*/
 #define TIOCSERSETMULTI 0x5490 /* Set multiport config */
-#define TIOCMIWAIT      0x5491 /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT     0x5492 /* read serial port inline interrupt counts */
+#define TIOCMIWAIT	0x5491 /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x5492 /* read serial port inline interrupt counts */
 
 #endif /* __ASM_IOCTLS_H */
diff --git a/arch/mips/include/uapi/asm/mman.h b/arch/mips/include/uapi/asm/mman.h
index 9a936ac..cfcb876 100644
--- a/arch/mips/include/uapi/asm/mman.h
+++ b/arch/mips/include/uapi/asm/mman.h
@@ -64,7 +64,7 @@
 
 #define MADV_NORMAL	0		/* no further special treatment */
 #define MADV_RANDOM	1		/* expect random page references */
-#define MADV_SEQUENTIAL	2		/* expect sequential page references */
+#define MADV_SEQUENTIAL 2		/* expect sequential page references */
 #define MADV_WILLNEED	3		/* will need these pages */
 #define MADV_DONTNEED	4		/* don't need these pages */
 
@@ -73,14 +73,14 @@
 #define MADV_DONTFORK	10		/* don't inherit across fork */
 #define MADV_DOFORK	11		/* do inherit across fork */
 
-#define MADV_MERGEABLE   12		/* KSM may merge identical pages */
+#define MADV_MERGEABLE	 12		/* KSM may merge identical pages */
 #define MADV_UNMERGEABLE 13		/* KSM may not merge identical pages */
-#define MADV_HWPOISON    100		/* poison a page for testing */
+#define MADV_HWPOISON	 100		/* poison a page for testing */
 
 #define MADV_HUGEPAGE	14		/* Worth backing with hugepages */
-#define MADV_NOHUGEPAGE	15		/* Not worth backing with hugepages */
+#define MADV_NOHUGEPAGE 15		/* Not worth backing with hugepages */
 
-#define MADV_DONTDUMP   16		/* Explicity exclude from the core dump,
+#define MADV_DONTDUMP	16		/* Explicity exclude from the core dump,
 					   overrides the coredump filter bits */
 #define MADV_DODUMP	17		/* Clear the MADV_NODUMP flag */
 
diff --git a/arch/mips/include/uapi/asm/ptrace.h b/arch/mips/include/uapi/asm/ptrace.h
index 1bc1f52..4d58d84 100644
--- a/arch/mips/include/uapi/asm/ptrace.h
+++ b/arch/mips/include/uapi/asm/ptrace.h
@@ -49,8 +49,8 @@
 	unsigned long cp0_tcstatus;
 #endif /* CONFIG_MIPS_MT_SMTC */
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
-	unsigned long long mpl[3];        /* MTM{0,1,2} */
-	unsigned long long mtp[3];        /* MTP{0,1,2} */
+	unsigned long long mpl[3];	  /* MTM{0,1,2} */
+	unsigned long long mtp[3];	  /* MTP{0,1,2} */
 #endif
 } __attribute__ ((aligned (8)));
 
@@ -67,14 +67,14 @@
 #define PTRACE_GET_THREAD_AREA	25
 #define PTRACE_SET_THREAD_AREA	26
 
-/* Calls to trace a 64bit program from a 32bit program.  */
+/* Calls to trace a 64bit program from a 32bit program.	 */
 #define PTRACE_PEEKTEXT_3264	0xc0
 #define PTRACE_PEEKDATA_3264	0xc1
 #define PTRACE_POKETEXT_3264	0xc2
 #define PTRACE_POKEDATA_3264	0xc3
 #define PTRACE_GET_THREAD_AREA_3264	0xc4
 
-/* Read and write watchpoint registers.  */
+/* Read and write watchpoint registers.	 */
 enum pt_watch_style {
 	pt_watch_style_mips32,
 	pt_watch_style_mips64
diff --git a/arch/mips/include/uapi/asm/sembuf.h b/arch/mips/include/uapi/asm/sembuf.h
index 7281a4d..e1085ac 100644
--- a/arch/mips/include/uapi/asm/sembuf.h
+++ b/arch/mips/include/uapi/asm/sembuf.h
@@ -12,8 +12,8 @@
 
 struct semid64_ds {
 	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	__kernel_time_t	sem_ctime;		/* last change time */
+	__kernel_time_t sem_otime;		/* last semop time */
+	__kernel_time_t sem_ctime;		/* last change time */
 	unsigned long	sem_nsems;		/* no. of semaphores in array */
 	unsigned long	__unused1;
 	unsigned long	__unused2;
diff --git a/arch/mips/include/uapi/asm/siginfo.h b/arch/mips/include/uapi/asm/siginfo.h
index 7344650..6a87141 100644
--- a/arch/mips/include/uapi/asm/siginfo.h
+++ b/arch/mips/include/uapi/asm/siginfo.h
@@ -11,7 +11,7 @@
 
 
 #define __ARCH_SIGEV_PREAMBLE_SIZE (sizeof(long) + 2*sizeof(int))
-#undef __ARCH_SI_TRAPNO	/* exception code needs to fill this ...  */
+#undef __ARCH_SI_TRAPNO /* exception code needs to fill this ...  */
 
 #define HAVE_ARCH_SIGINFO_T
 
@@ -55,7 +55,7 @@
 			int _overrun;		/* overrun count */
 			char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
 			sigval_t _sigval;	/* same as below */
-			int _sys_private;       /* not to be passed to user */
+			int _sys_private;	/* not to be passed to user */
 		} _timer;
 
 		/* POSIX.1b signals */
@@ -91,9 +91,9 @@
 			short _addr_lsb;
 		} _sigfault;
 
-		/* SIGPOLL, SIGXFSZ (To do ...)  */
+		/* SIGPOLL, SIGXFSZ (To do ...)	 */
 		struct {
-			__ARCH_SI_BAND_T _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			__ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */
 			int _fd;
 		} _sigpoll;
 	} _sifields;
diff --git a/arch/mips/include/uapi/asm/signal.h b/arch/mips/include/uapi/asm/signal.h
index 6783c88..d6b18b4 100644
--- a/arch/mips/include/uapi/asm/signal.h
+++ b/arch/mips/include/uapi/asm/signal.h
@@ -24,28 +24,28 @@
 #define SIGHUP		 1	/* Hangup (POSIX).  */
 #define SIGINT		 2	/* Interrupt (ANSI).  */
 #define SIGQUIT		 3	/* Quit (POSIX).  */
-#define SIGILL		 4	/* Illegal instruction (ANSI).  */
-#define SIGTRAP		 5	/* Trace trap (POSIX).  */
-#define SIGIOT		 6	/* IOT trap (4.2 BSD).  */
-#define SIGABRT		 SIGIOT	/* Abort (ANSI).  */
+#define SIGILL		 4	/* Illegal instruction (ANSI).	*/
+#define SIGTRAP		 5	/* Trace trap (POSIX).	*/
+#define SIGIOT		 6	/* IOT trap (4.2 BSD).	*/
+#define SIGABRT		 SIGIOT /* Abort (ANSI).  */
 #define SIGEMT		 7
 #define SIGFPE		 8	/* Floating-point exception (ANSI).  */
 #define SIGKILL		 9	/* Kill, unblockable (POSIX).  */
-#define SIGBUS		10	/* BUS error (4.2 BSD).  */
+#define SIGBUS		10	/* BUS error (4.2 BSD).	 */
 #define SIGSEGV		11	/* Segmentation violation (ANSI).  */
 #define SIGSYS		12
-#define SIGPIPE		13	/* Broken pipe (POSIX).  */
-#define SIGALRM		14	/* Alarm clock (POSIX).  */
-#define SIGTERM		15	/* Termination (ANSI).  */
+#define SIGPIPE		13	/* Broken pipe (POSIX).	 */
+#define SIGALRM		14	/* Alarm clock (POSIX).	 */
+#define SIGTERM		15	/* Termination (ANSI).	*/
 #define SIGUSR1		16	/* User-defined signal 1 (POSIX).  */
 #define SIGUSR2		17	/* User-defined signal 2 (POSIX).  */
 #define SIGCHLD		18	/* Child status has changed (POSIX).  */
-#define SIGCLD		SIGCHLD	/* Same as SIGCHLD (System V).  */
+#define SIGCLD		SIGCHLD /* Same as SIGCHLD (System V).	*/
 #define SIGPWR		19	/* Power failure restart (System V).  */
 #define SIGWINCH	20	/* Window size change (4.3 BSD, Sun).  */
 #define SIGURG		21	/* Urgent condition on socket (4.2 BSD).  */
-#define SIGIO		22	/* I/O now possible (4.2 BSD).  */
-#define SIGPOLL		SIGIO	/* Pollable event occurred (System V).  */
+#define SIGIO		22	/* I/O now possible (4.2 BSD).	*/
+#define SIGPOLL		SIGIO	/* Pollable event occurred (System V).	*/
 #define SIGSTOP		23	/* Stop, unblockable (POSIX).  */
 #define SIGTSTP		24	/* Keyboard stop (POSIX).  */
 #define SIGCONT		25	/* Continue (POSIX).  */
@@ -54,7 +54,7 @@
 #define SIGVTALRM	28	/* Virtual alarm clock (4.2 BSD).  */
 #define SIGPROF		29	/* Profiling alarm clock (4.2 BSD).  */
 #define SIGXCPU		30	/* CPU limit exceeded (4.2 BSD).  */
-#define SIGXFSZ		31	/* File size limit exceeded (4.2 BSD).  */
+#define SIGXFSZ		31	/* File size limit exceeded (4.2 BSD).	*/
 
 /* These should not be considered constants from userland.  */
 #define SIGRTMIN	32
diff --git a/arch/mips/include/uapi/asm/socket.h b/arch/mips/include/uapi/asm/socket.h
index 3e68bfb..47132f4 100644
--- a/arch/mips/include/uapi/asm/socket.h
+++ b/arch/mips/include/uapi/asm/socket.h
@@ -24,21 +24,21 @@
 				   SIGPIPE when they die.  */
 #define SO_DONTROUTE	0x0010	/* Don't do local routing.  */
 #define SO_BROADCAST	0x0020	/* Allow transmission of
-				   broadcast messages.  */
+				   broadcast messages.	*/
 #define SO_LINGER	0x0080	/* Block on close of a reliable
 				   socket to transmit pending data.  */
 #define SO_OOBINLINE 0x0100	/* Receive out-of-band data in-band.  */
 #define SO_REUSEPORT 0x0200	/* Allow local address and port reuse.  */
 
 #define SO_TYPE		0x1008	/* Compatible name for SO_STYLE.  */
-#define SO_STYLE	SO_TYPE	/* Synonym */
+#define SO_STYLE	SO_TYPE /* Synonym */
 #define SO_ERROR	0x1007	/* get error status and clear */
 #define SO_SNDBUF	0x1001	/* Send buffer size. */
 #define SO_RCVBUF	0x1002	/* Receive buffer. */
 #define SO_SNDLOWAT	0x1003	/* send low-water mark */
 #define SO_RCVLOWAT	0x1004	/* receive low-water mark */
 #define SO_SNDTIMEO	0x1005	/* send timeout */
-#define SO_RCVTIMEO 	0x1006	/* receive timeout */
+#define SO_RCVTIMEO	0x1006	/* receive timeout */
 #define SO_ACCEPTCONN	0x1009
 #define SO_PROTOCOL	0x1028	/* protocol type */
 #define SO_DOMAIN	0x1029	/* domain/socket family */
@@ -59,11 +59,11 @@
 #define SO_BINDTODEVICE		25
 
 /* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
 #define SO_GET_FILTER		SO_ATTACH_FILTER
 
-#define SO_PEERNAME             28
+#define SO_PEERNAME		28
 #define SO_TIMESTAMP		29
 #define SCM_TIMESTAMP		SO_TIMESTAMP
 
@@ -79,7 +79,7 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
-#define SO_RXQ_OVFL             40
+#define SO_RXQ_OVFL		40
 
 #define SO_WIFI_STATUS		41
 #define SCM_WIFI_STATUS		SO_WIFI_STATUS
diff --git a/arch/mips/include/uapi/asm/sockios.h b/arch/mips/include/uapi/asm/sockios.h
index ed1a5f7..419fbe6 100644
--- a/arch/mips/include/uapi/asm/sockios.h
+++ b/arch/mips/include/uapi/asm/sockios.h
@@ -14,7 +14,7 @@
 
 /* Socket-level I/O control calls. */
 #define FIOGETOWN	_IOR('f', 123, int)
-#define FIOSETOWN 	_IOW('f', 124, int)
+#define FIOSETOWN	_IOW('f', 124, int)
 
 #define SIOCATMARK	_IOR('s', 7, int)
 #define SIOCSPGRP	_IOW('s', 8, pid_t)
diff --git a/arch/mips/include/uapi/asm/stat.h b/arch/mips/include/uapi/asm/stat.h
index fe9a4c3..b47bc54 100644
--- a/arch/mips/include/uapi/asm/stat.h
+++ b/arch/mips/include/uapi/asm/stat.h
@@ -23,7 +23,7 @@
 	__u32		st_nlink;
 	uid_t		st_uid;
 	gid_t		st_gid;
-	unsigned 	st_rdev;
+	unsigned	st_rdev;
 	long		st_pad2[2];
 	off_t		st_size;
 	long		st_pad3;
diff --git a/arch/mips/include/uapi/asm/statfs.h b/arch/mips/include/uapi/asm/statfs.h
index 0f805c7..3305c83 100644
--- a/arch/mips/include/uapi/asm/statfs.h
+++ b/arch/mips/include/uapi/asm/statfs.h
@@ -15,7 +15,7 @@
 
 #include <linux/types.h>
 
-typedef __kernel_fsid_t        fsid_t;
+typedef __kernel_fsid_t	       fsid_t;
 
 #endif
 
@@ -31,7 +31,7 @@
 	long		f_bavail;
 
 	/* Linux specials */
-	__kernel_fsid_t	f_fsid;
+	__kernel_fsid_t f_fsid;
 	long		f_namelen;
 	long		f_flags;
 	long		f_spare[5];
@@ -73,7 +73,7 @@
 	long		f_bavail;
 
 	/* Linux specials */
-	__kernel_fsid_t	f_fsid;
+	__kernel_fsid_t f_fsid;
 	long		f_namelen;
 	long		f_flags;
 	long		f_spare[5];
diff --git a/arch/mips/include/uapi/asm/sysmips.h b/arch/mips/include/uapi/asm/sysmips.h
index 4f47b7d..ae637e9 100644
--- a/arch/mips/include/uapi/asm/sysmips.h
+++ b/arch/mips/include/uapi/asm/sysmips.h
@@ -16,10 +16,10 @@
  * sysmips(2) is deprecated - though some existing software uses it.
  * We only support the following commands.
  */
-#define SETNAME                    1	/* set hostname                  */
+#define SETNAME			   1	/* set hostname			 */
 #define FLUSH_CACHE		   3	/* writeback and invalidate caches */
-#define MIPS_FIXADE                7	/* control address error fixing  */
-#define MIPS_RDNVRAM              10	/* read NVRAM */
-#define MIPS_ATOMIC_SET		2001	/* atomically set variable       */
+#define MIPS_FIXADE		   7	/* control address error fixing	 */
+#define MIPS_RDNVRAM		  10	/* read NVRAM */
+#define MIPS_ATOMIC_SET		2001	/* atomically set variable	 */
 
 #endif /* _ASM_SYSMIPS_H */
diff --git a/arch/mips/include/uapi/asm/termbits.h b/arch/mips/include/uapi/asm/termbits.h
index 76630b3..2750203 100644
--- a/arch/mips/include/uapi/asm/termbits.h
+++ b/arch/mips/include/uapi/asm/termbits.h
@@ -53,7 +53,7 @@
 };
 
 /* c_cc characters */
-#define VINTR		 0		/* Interrupt character [ISIG].  */
+#define VINTR		 0		/* Interrupt character [ISIG].	*/
 #define VQUIT		 1		/* Quit character [ISIG].  */
 #define VERASE		 2		/* Erase character [ICANON].  */
 #define VKILL		 3		/* Kill-line character [ICANON].  */
@@ -72,7 +72,7 @@
 #define VDSUSP		11		/* Delayed suspend character [ISIG].  */
 #endif
 #define VREPRINT	12		/* Reprint-line character [ICANON].  */
-#define VDISCARD	13		/* Discard character [IEXTEN].  */
+#define VDISCARD	13		/* Discard character [IEXTEN].	*/
 #define VWERASE		14		/* Word-erase character [ICANON].  */
 #define VLNEXT		15		/* Literal-next character [IEXTEN].  */
 #define VEOF		16		/* End-of-file character [ICANON].  */
@@ -92,7 +92,7 @@
 #define IXON	0002000		/* Enable start/stop output control.  */
 #define IXANY	0004000		/* Any character will restart after stop.  */
 #define IXOFF	0010000		/* Enable start/stop input control.  */
-#define IMAXBEL	0020000		/* Ring bell when input queue is full.  */
+#define IMAXBEL 0020000		/* Ring bell when input queue is full.	*/
 #define IUTF8	0040000		/* Input is UTF-8 */
 
 /* c_oflag bits */
@@ -105,123 +105,123 @@
 #define OFILL	0000100
 #define OFDEL	0000200
 #define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
+#define	  NL0	0000000
+#define	  NL1	0000400
 #define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
+#define	  CR0	0000000
+#define	  CR1	0001000
+#define	  CR2	0002000
+#define	  CR3	0003000
 #define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
+#define	  TAB0	0000000
+#define	  TAB1	0004000
+#define	  TAB2	0010000
+#define	  TAB3	0014000
+#define	  XTABS 0014000
 #define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
+#define	  BS0	0000000
+#define	  BS1	0020000
 #define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
+#define	  VT0	0000000
+#define	  VT1	0040000
 #define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
+#define	  FF0	0000000
+#define	  FF1	0100000
 /*
 #define PAGEOUT ???
-#define WRAP    ???
+#define WRAP	???
  */
 
 /* c_cflag bit meaning */
 #define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
+#define	 B0	0000000		/* hang up */
+#define	 B50	0000001
+#define	 B75	0000002
+#define	 B110	0000003
+#define	 B134	0000004
+#define	 B150	0000005
+#define	 B200	0000006
+#define	 B300	0000007
+#define	 B600	0000010
+#define	 B1200	0000011
+#define	 B1800	0000012
+#define	 B2400	0000013
+#define	 B4800	0000014
+#define	 B9600	0000015
+#define	 B19200 0000016
+#define	 B38400 0000017
 #define EXTA B19200
 #define EXTB B38400
 #define CSIZE	0000060		/* Number of bits per byte (mask).  */
-#define   CS5	0000000		/* 5 bits per byte.  */
-#define   CS6	0000020		/* 6 bits per byte.  */
-#define   CS7	0000040		/* 7 bits per byte.  */
-#define   CS8	0000060		/* 8 bits per byte.  */
+#define	  CS5	0000000		/* 5 bits per byte.  */
+#define	  CS6	0000020		/* 6 bits per byte.  */
+#define	  CS7	0000040		/* 7 bits per byte.  */
+#define	  CS8	0000060		/* 8 bits per byte.  */
 #define CSTOPB	0000100		/* Two stop bits instead of one.  */
 #define CREAD	0000200		/* Enable receiver.  */
 #define PARENB	0000400		/* Parity enable.  */
-#define PARODD	0001000		/* Odd parity instead of even.  */
+#define PARODD	0001000		/* Odd parity instead of even.	*/
 #define HUPCL	0002000		/* Hang up on last close.  */
 #define CLOCAL	0004000		/* Ignore modem status lines.  */
 #define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
+#define	   BOTHER 0010000
+#define	   B57600 0010001
+#define	  B115200 0010002
+#define	  B230400 0010003
+#define	  B460800 0010004
+#define	  B500000 0010005
+#define	  B576000 0010006
+#define	  B921600 0010007
+#define	 B1000000 0010010
+#define	 B1152000 0010011
+#define	 B1500000 0010012
+#define	 B2000000 0010013
+#define	 B2500000 0010014
+#define	 B3000000 0010015
+#define	 B3500000 0010016
+#define	 B4000000 0010017
 #define CIBAUD	  002003600000	/* input baud rate */
-#define CMSPAR    010000000000	/* mark or space (stick) parity */
+#define CMSPAR	  010000000000	/* mark or space (stick) parity */
 #define CRTSCTS	  020000000000	/* flow control */
 
-#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
+#define IBSHIFT 16		/* Shift from CBAUD to CIBAUD */
 
 /* c_lflag bits */
 #define ISIG	0000001		/* Enable signals.  */
 #define ICANON	0000002		/* Do erase and kill processing.  */
 #define XCASE	0000004
-#define ECHO	0000010		/* Enable echo.  */
+#define ECHO	0000010		/* Enable echo.	 */
 #define ECHOE	0000020		/* Visual erase for ERASE.  */
-#define ECHOK	0000040		/* Echo NL after KILL.  */
-#define ECHONL	0000100		/* Echo NL even if ECHO is off.  */
+#define ECHOK	0000040		/* Echo NL after KILL.	*/
+#define ECHONL	0000100		/* Echo NL even if ECHO is off.	 */
 #define NOFLSH	0000200		/* Disable flush after interrupt.  */
 #define IEXTEN	0000400		/* Enable DISCARD and LNEXT.  */
-#define ECHOCTL	0001000		/* Echo control characters as ^X.  */
-#define ECHOPRT	0002000		/* Hardcopy visual erase.  */
+#define ECHOCTL 0001000		/* Echo control characters as ^X.  */
+#define ECHOPRT 0002000		/* Hardcopy visual erase.  */
 #define ECHOKE	0004000		/* Visual erase for KILL.  */
 #define FLUSHO	0020000
 #define PENDIN	0040000		/* Retype pending input (state).  */
-#define TOSTOP	0100000		/* Send SIGTTOU for background output.  */
-#define ITOSTOP	TOSTOP
-#define EXTPROC	0200000		/* External processing on pty */
+#define TOSTOP	0100000		/* Send SIGTTOU for background output.	*/
+#define ITOSTOP TOSTOP
+#define EXTPROC 0200000		/* External processing on pty */
 
 /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
 
 /* tcflow() and TCXONC use these */
-#define	TCOOFF		0	/* Suspend output.  */
-#define	TCOON		1	/* Restart suspended output.  */
-#define	TCIOFF		2	/* Send a STOP character.  */
-#define	TCION		3	/* Send a START character.  */
+#define TCOOFF		0	/* Suspend output.  */
+#define TCOON		1	/* Restart suspended output.  */
+#define TCIOFF		2	/* Send a STOP character.  */
+#define TCION		3	/* Send a START character.  */
 
 /* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0	/* Discard data received but not yet read.  */
-#define	TCOFLUSH	1	/* Discard data written but not yet sent.  */
-#define	TCIOFLUSH	2	/* Discard all pending data.  */
+#define TCIFLUSH	0	/* Discard data received but not yet read.  */
+#define TCOFLUSH	1	/* Discard data written but not yet sent.  */
+#define TCIOFLUSH	2	/* Discard all pending data.  */
 
 /* tcsetattr uses these */
-#define	TCSANOW		TCSETS	/* Change immediately.  */
-#define	TCSADRAIN	TCSETSW	/* Change when pending output is written.  */
-#define	TCSAFLUSH	TCSETSF	/* Flush pending input before changing.  */
+#define TCSANOW		TCSETS	/* Change immediately.	*/
+#define TCSADRAIN	TCSETSW /* Change when pending output is written.  */
+#define TCSAFLUSH	TCSETSF /* Flush pending input before changing.	 */
 
 #endif /* _ASM_TERMBITS_H */
diff --git a/arch/mips/include/uapi/asm/termios.h b/arch/mips/include/uapi/asm/termios.h
index 574fbdf..baeb2fa 100644
--- a/arch/mips/include/uapi/asm/termios.h
+++ b/arch/mips/include/uapi/asm/termios.h
@@ -31,12 +31,12 @@
 };
 
 struct ltchars {
-        char    t_suspc;        /* stop process signal */
-        char    t_dsuspc;       /* delayed stop process signal */
-        char    t_rprntc;       /* reprint line */
-        char    t_flushc;       /* flush output (toggles) */
-        char    t_werasc;       /* word erase */
-        char    t_lnextc;       /* literal next character */
+	char	t_suspc;	/* stop process signal */
+	char	t_dsuspc;	/* delayed stop process signal */
+	char	t_rprntc;	/* reprint line */
+	char	t_flushc;	/* flush output (toggles) */
+	char	t_werasc;	/* word erase */
+	char	t_lnextc;	/* literal next character */
 };
 
 /* TIOCGSIZE, TIOCSSIZE not defined yet.  Only needed for SunOS source
diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h
index 0eebf3c..16338b8 100644
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@@ -20,16 +20,16 @@
  * Linux o32 style syscalls are in the range from 4000 to 4999.
  */
 #define __NR_Linux			4000
-#define __NR_syscall			(__NR_Linux +   0)
-#define __NR_exit			(__NR_Linux +   1)
-#define __NR_fork			(__NR_Linux +   2)
-#define __NR_read			(__NR_Linux +   3)
-#define __NR_write			(__NR_Linux +   4)
-#define __NR_open			(__NR_Linux +   5)
-#define __NR_close			(__NR_Linux +   6)
-#define __NR_waitpid			(__NR_Linux +   7)
-#define __NR_creat			(__NR_Linux +   8)
-#define __NR_link			(__NR_Linux +   9)
+#define __NR_syscall			(__NR_Linux +	0)
+#define __NR_exit			(__NR_Linux +	1)
+#define __NR_fork			(__NR_Linux +	2)
+#define __NR_read			(__NR_Linux +	3)
+#define __NR_write			(__NR_Linux +	4)
+#define __NR_open			(__NR_Linux +	5)
+#define __NR_close			(__NR_Linux +	6)
+#define __NR_waitpid			(__NR_Linux +	7)
+#define __NR_creat			(__NR_Linux +	8)
+#define __NR_link			(__NR_Linux +	9)
 #define __NR_unlink			(__NR_Linux +  10)
 #define __NR_execve			(__NR_Linux +  11)
 #define __NR_chdir			(__NR_Linux +  12)
@@ -386,16 +386,16 @@
  * Linux 64-bit syscalls are in the range from 5000 to 5999.
  */
 #define __NR_Linux			5000
-#define __NR_read			(__NR_Linux +   0)
-#define __NR_write			(__NR_Linux +   1)
-#define __NR_open			(__NR_Linux +   2)
-#define __NR_close			(__NR_Linux +   3)
-#define __NR_stat			(__NR_Linux +   4)
-#define __NR_fstat			(__NR_Linux +   5)
-#define __NR_lstat			(__NR_Linux +   6)
-#define __NR_poll			(__NR_Linux +   7)
-#define __NR_lseek			(__NR_Linux +   8)
-#define __NR_mmap			(__NR_Linux +   9)
+#define __NR_read			(__NR_Linux +	0)
+#define __NR_write			(__NR_Linux +	1)
+#define __NR_open			(__NR_Linux +	2)
+#define __NR_close			(__NR_Linux +	3)
+#define __NR_stat			(__NR_Linux +	4)
+#define __NR_fstat			(__NR_Linux +	5)
+#define __NR_lstat			(__NR_Linux +	6)
+#define __NR_poll			(__NR_Linux +	7)
+#define __NR_lseek			(__NR_Linux +	8)
+#define __NR_mmap			(__NR_Linux +	9)
 #define __NR_mprotect			(__NR_Linux +  10)
 #define __NR_munmap			(__NR_Linux +  11)
 #define __NR_brk			(__NR_Linux +  12)
@@ -711,16 +711,16 @@
  * Linux N32 syscalls are in the range from 6000 to 6999.
  */
 #define __NR_Linux			6000
-#define __NR_read			(__NR_Linux +   0)
-#define __NR_write			(__NR_Linux +   1)
-#define __NR_open			(__NR_Linux +   2)
-#define __NR_close			(__NR_Linux +   3)
-#define __NR_stat			(__NR_Linux +   4)
-#define __NR_fstat			(__NR_Linux +   5)
-#define __NR_lstat			(__NR_Linux +   6)
-#define __NR_poll			(__NR_Linux +   7)
-#define __NR_lseek			(__NR_Linux +   8)
-#define __NR_mmap			(__NR_Linux +   9)
+#define __NR_read			(__NR_Linux +	0)
+#define __NR_write			(__NR_Linux +	1)
+#define __NR_open			(__NR_Linux +	2)
+#define __NR_close			(__NR_Linux +	3)
+#define __NR_stat			(__NR_Linux +	4)
+#define __NR_fstat			(__NR_Linux +	5)
+#define __NR_lstat			(__NR_Linux +	6)
+#define __NR_poll			(__NR_Linux +	7)
+#define __NR_lseek			(__NR_Linux +	8)
+#define __NR_mmap			(__NR_Linux +	9)
 #define __NR_mprotect			(__NR_Linux +  10)
 #define __NR_munmap			(__NR_Linux +  11)
 #define __NR_brk			(__NR_Linux +  12)
diff --git a/arch/mips/jazz/Makefile b/arch/mips/jazz/Makefile
index dd9d99b..624b0ee 100644
--- a/arch/mips/jazz/Makefile
+++ b/arch/mips/jazz/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the Jazz family specific parts of the kernel
 #
 
-obj-y	 	:= irq.o jazzdma.o reset.o setup.o
+obj-y		:= irq.o jazzdma.o reset.o setup.o
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
index f21868b..e1ea4f6 100644
--- a/arch/mips/jazz/irq.c
+++ b/arch/mips/jazz/irq.c
@@ -111,7 +111,7 @@
 }
 
 static void r4030_set_mode(enum clock_event_mode mode,
-                           struct clock_event_device *evt)
+			   struct clock_event_device *evt)
 {
 	/* Nothing to do ...  */
 }
@@ -146,7 +146,7 @@
 
 	BUG_ON(HZ != 100);
 
-	cd->cpumask             = cpumask_of(cpu);
+	cd->cpumask		= cpumask_of(cpu);
 	clockevents_register_device(cd);
 	action->dev_id = cd;
 	setup_irq(JAZZ_TIMER_IRQ, action);
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index 2d8e447..db6f5af 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -63,7 +63,7 @@
 static int __init vdma_init(void)
 {
 	/*
-	 * Allocate 32k of memory for DMA page tables.  This needs to be page
+	 * Allocate 32k of memory for DMA page tables.	This needs to be page
 	 * aligned and should be uncached to avoid cache flushing after every
 	 * update.
 	 */
@@ -218,14 +218,14 @@
 			printk
 			    ("vdma_map: Invalid logical address: %08lx\n",
 			     laddr);
-		return -EINVAL;	/* invalid logical address */
+		return -EINVAL; /* invalid logical address */
 	}
 	if (paddr > 0x1fffffff) {
 		if (vdma_debug)
 			printk
 			    ("vdma_map: Invalid physical address: %08lx\n",
 			     paddr);
-		return -EINVAL;	/* invalid physical address */
+		return -EINVAL; /* invalid physical address */
 	}
 
 	pages = (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1;
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index 820e926..e4374a5 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -137,9 +137,9 @@
 };
 
 static struct platform_device jazz_esp_pdev = {
-	.name           = "jazz_esp",
-	.num_resources  = ARRAY_SIZE(jazz_esp_rsrc),
-	.resource       = jazz_esp_rsrc
+	.name		= "jazz_esp",
+	.num_resources	= ARRAY_SIZE(jazz_esp_rsrc),
+	.resource	= jazz_esp_rsrc
 };
 
 static struct resource jazz_sonic_rsrc[] = {
@@ -156,9 +156,9 @@
 };
 
 static struct platform_device jazz_sonic_pdev = {
-	.name           = "jazzsonic",
-	.num_resources  = ARRAY_SIZE(jazz_sonic_rsrc),
-	.resource       = jazz_sonic_rsrc
+	.name		= "jazzsonic",
+	.num_resources	= ARRAY_SIZE(jazz_sonic_rsrc),
+	.resource	= jazz_sonic_rsrc
 };
 
 static struct resource jazz_cmos_rsrc[] = {
@@ -175,13 +175,13 @@
 };
 
 static struct platform_device jazz_cmos_pdev = {
-	.name           = "rtc_cmos",
-	.num_resources  = ARRAY_SIZE(jazz_cmos_rsrc),
-	.resource       = jazz_cmos_rsrc
+	.name		= "rtc_cmos",
+	.num_resources	= ARRAY_SIZE(jazz_cmos_rsrc),
+	.resource	= jazz_cmos_rsrc
 };
 
 static struct platform_device pcspeaker_pdev = {
-	.name           = "pcspkr",
+	.name		= "pcspkr",
 	.id		= -1,
 };
 
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 43d964d..be2b3de 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -52,7 +52,7 @@
 static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
 	.eccbytes = 36,
 	.eccpos = {
-		6,  7,  8,  9,  10, 11, 12, 13,
+		6,  7,	8,  9,	10, 11, 12, 13,
 		14, 15, 16, 17, 18, 19, 20, 21,
 		22, 23, 24, 25, 26, 27, 28, 29,
 		30, 31, 32, 33, 34, 35, 36, 37,
@@ -210,7 +210,7 @@
 	KEY(6, 7, KEY_RIGHT),	/* S57 */
 
 	KEY(7, 0, KEY_LEFTSHIFT),	/* S58 */
-	KEY(7, 1, KEY_LEFTALT),	/* S59 */
+	KEY(7, 1, KEY_LEFTALT), /* S59 */
 	KEY(7, 2, KEY_QI_FN),	/* S60 */
 };
 
@@ -317,7 +317,7 @@
 
 /* Battery */
 static struct jz_battery_platform_data qi_lb60_battery_pdata = {
-	.gpio_charge =  JZ_GPIO_PORTC(27),
+	.gpio_charge =	JZ_GPIO_PORTC(27),
 	.gpio_charge_active_low = 1,
 	.info = {
 		.name = "battery",
@@ -344,7 +344,7 @@
 };
 
 static struct platform_device qi_lb60_gpio_keys = {
-	.name =	"gpio-keys",
+	.name = "gpio-keys",
 	.id =	-1,
 	.dev = {
 		.platform_data = &qi_lb60_gpio_keys_data,
diff --git a/arch/mips/jz4740/clock-debugfs.c b/arch/mips/jz4740/clock-debugfs.c
index 330a0f2..a8acdef 100644
--- a/arch/mips/jz4740/clock-debugfs.c
+++ b/arch/mips/jz4740/clock-debugfs.c
@@ -3,7 +3,7 @@
  *  JZ4740 SoC clock support debugfs entries
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/jz4740/clock.c b/arch/mips/jz4740/clock.c
index 118a8a5..484d38a 100644
--- a/arch/mips/jz4740/clock.c
+++ b/arch/mips/jz4740/clock.c
@@ -3,7 +3,7 @@
  *  JZ4740 SoC clock support
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
@@ -31,7 +31,7 @@
 #define JZ_REG_CLOCK_LOW_POWER	0x04
 #define JZ_REG_CLOCK_PLL	0x10
 #define JZ_REG_CLOCK_GATE	0x20
-#define JZ_REG_CLOCK_SLEEP_CTRL	0x24
+#define JZ_REG_CLOCK_SLEEP_CTRL 0x24
 #define JZ_REG_CLOCK_I2S	0x60
 #define JZ_REG_CLOCK_LCD	0x64
 #define JZ_REG_CLOCK_MMC	0x68
diff --git a/arch/mips/jz4740/dma.c b/arch/mips/jz4740/dma.c
index d7feb89..317ec6f 100644
--- a/arch/mips/jz4740/dma.c
+++ b/arch/mips/jz4740/dma.c
@@ -3,7 +3,7 @@
  *  JZ4740 SoC DMA support
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c
index e1ddb95..00b798d 100644
--- a/arch/mips/jz4740/gpio.c
+++ b/arch/mips/jz4740/gpio.c
@@ -3,7 +3,7 @@
  *  JZ4740 platform GPIO support
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/jz4740/irq.c b/arch/mips/jz4740/irq.c
index fc57ded..2531da1 100644
--- a/arch/mips/jz4740/irq.c
+++ b/arch/mips/jz4740/irq.c
@@ -3,7 +3,7 @@
  *  JZ4740 platform IRQ support
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/jz4740/irq.h b/arch/mips/jz4740/irq.h
index f75e39d..0f48720 100644
--- a/arch/mips/jz4740/irq.h
+++ b/arch/mips/jz4740/irq.h
@@ -2,7 +2,7 @@
  *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
index 6d14dcd..e9348fd 100644
--- a/arch/mips/jz4740/platform.c
+++ b/arch/mips/jz4740/platform.c
@@ -3,7 +3,7 @@
  *  JZ4740 platform devices
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
@@ -102,7 +102,7 @@
 		.dma_mask = &jz4740_mmc_device.dev.coherent_dma_mask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
-	.num_resources  = ARRAY_SIZE(jz4740_mmc_resources),
+	.num_resources	= ARRAY_SIZE(jz4740_mmc_resources),
 	.resource	= jz4740_mmc_resources,
 };
 
@@ -114,7 +114,7 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start  = JZ4740_IRQ_RTC,
+		.start	= JZ4740_IRQ_RTC,
 		.end	= JZ4740_IRQ_RTC,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -144,7 +144,7 @@
 struct platform_device jz4740_i2c_device = {
 	.name		= "jz4740-i2c",
 	.id		= 0,
-	.num_resources  = ARRAY_SIZE(jz4740_i2c_resources),
+	.num_resources	= ARRAY_SIZE(jz4740_i2c_resources),
 	.resource	= jz4740_i2c_resources,
 };
 
@@ -318,8 +318,8 @@
 };
 
 struct platform_device jz4740_wdt_device = {
-	.name          = "jz4740-wdt",
-	.id            = -1,
+	.name	       = "jz4740-wdt",
+	.id	       = -1,
 	.num_resources = ARRAY_SIZE(jz4740_wdt_resources),
 	.resource      = jz4740_wdt_resources,
 };
diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c
index 6744fa7..d8e2130 100644
--- a/arch/mips/jz4740/pm.c
+++ b/arch/mips/jz4740/pm.c
@@ -3,7 +3,7 @@
  *	JZ4740 SoC power management support
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index 4a70407..5a93f38 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -3,7 +3,7 @@
  *  JZ4740 SoC prom code
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/jz4740/reset.c b/arch/mips/jz4740/reset.c
index 6c0da5a..b6c6343 100644
--- a/arch/mips/jz4740/reset.c
+++ b/arch/mips/jz4740/reset.c
@@ -2,7 +2,7 @@
  *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index d97cfbf..76eafcb 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -4,7 +4,7 @@
  *  JZ4740 setup code
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index 39bb4bb..5e430ce 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -3,7 +3,7 @@
  *  JZ4740 platform time support
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c
index 22f11d7..4992461 100644
--- a/arch/mips/jz4740/timer.c
+++ b/arch/mips/jz4740/timer.c
@@ -3,7 +3,7 @@
  *  JZ4740 platform timer support
  *
  *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
+ *  under  the terms of the GNU General	 Public License as published by the
  *  Free Software Foundation;  either version 2 of the License, or (at your
  *  option) any later version.
  *
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 007c33d..f81d98f 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -27,6 +27,7 @@
 obj-$(CONFIG_CSRC_POWERTV)	+= csrc-powertv.o
 obj-$(CONFIG_CSRC_R4K)		+= csrc-r4k.o
 obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
+obj-$(CONFIG_CSRC_GIC)		+= csrc-gic.o
 obj-$(CONFIG_SYNC_R4K)		+= sync-r4k.o
 
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
@@ -39,7 +40,7 @@
 obj-$(CONFIG_CPU_R3000)		+= r2300_fpu.o r2300_switch.o
 obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_TX39XX)	+= r2300_fpu.o r2300_switch.o
-obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= octeon_switch.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SMP_UP)		+= smp-up.o
@@ -53,7 +54,7 @@
 obj-$(CONFIG_CPU_MIPSR2)	+= spram.o
 
 obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o
-obj-$(CONFIG_MIPS_VPE_APSP_API)	+= rtlx.o
+obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
 
 obj-$(CONFIG_I8259)		+= i8259.o
 obj-$(CONFIG_IRQ_CPU)		+= irq_cpu.o
@@ -98,4 +99,35 @@
 
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 
+#
+# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is safe
+# to enable DSP assembler support here even if the MIPS Release 2 CPU we
+# are targetting does not support DSP because all code-paths making use of
+# it properly check that the running CPU *actually does* support these
+# instructions.
+#
+ifeq ($(CONFIG_CPU_MIPSR2), y)
+CFLAGS_DSP 			= -DHAVE_AS_DSP
+
+#
+# Check if assembler supports DSP ASE
+#
+ifeq ($(call cc-option-yn,-mdsp), y)
+CFLAGS_DSP			+= -mdsp
+endif
+
+#
+# Check if assembler supports DSP ASE Rev2
+#
+ifeq ($(call cc-option-yn,-mdspr2), y)
+CFLAGS_DSP			+= -mdspr2
+endif
+
+CFLAGS_signal.o			= $(CFLAGS_DSP)
+CFLAGS_signal32.o		= $(CFLAGS_DSP)
+CFLAGS_process.o		= $(CFLAGS_DSP)
+CFLAGS_branch.o			= $(CFLAGS_DSP)
+CFLAGS_ptrace.o			= $(CFLAGS_DSP)
+endif
+
 CPPFLAGS_vmlinux.lds		:= $(KBUILD_CFLAGS)
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 9fdd8bc..e06f777 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -6,7 +6,7 @@
  *
  * Heavily inspired by the 32-bit Sparc compat code which is
  * Copyright (C) 1995, 1996, 1997, 1998 David S. Miller (davem@redhat.com)
- * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek   (jj@ultra.linux.cz)
+ * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek	(jj@ultra.linux.cz)
  */
 
 #define ELF_ARCH		EM_MIPS
@@ -48,7 +48,7 @@
 
 #define TASK32_SIZE		0x7fff8000UL
 #undef ELF_ET_DYN_BASE
-#define ELF_ET_DYN_BASE         (TASK32_SIZE / 3 * 2)
+#define ELF_ET_DYN_BASE		(TASK32_SIZE / 3 * 2)
 
 #include <asm/processor.h>
 #include <linux/module.h>
@@ -67,8 +67,8 @@
 	pid_t	pr_ppid;
 	pid_t	pr_pgrp;
 	pid_t	pr_sid;
-	struct compat_timeval pr_utime;	/* User time */
-	struct compat_timeval pr_stime;	/* System time */
+	struct compat_timeval pr_utime; /* User time */
+	struct compat_timeval pr_stime; /* System time */
 	struct compat_timeval pr_cutime;/* Cumulative user time */
 	struct compat_timeval pr_cstime;/* Cumulative system time */
 	elf_gregset_t pr_reg;	/* GP registers */
@@ -88,7 +88,7 @@
 	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
 	/* Lots missing */
 	char	pr_fname[16];	/* filename of executable */
-	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
+	char	pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */
 };
 
 #define elf_caddr_t	u32
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index ff44823..556a435 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -6,7 +6,7 @@
  *
  * Heavily inspired by the 32-bit Sparc compat code which is
  * Copyright (C) 1995, 1996, 1997, 1998 David S. Miller (davem@redhat.com)
- * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek   (jj@ultra.linux.cz)
+ * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek	(jj@ultra.linux.cz)
  */
 
 #define ELF_ARCH		EM_MIPS
@@ -50,7 +50,7 @@
 
 #define TASK32_SIZE		0x7fff8000UL
 #undef ELF_ET_DYN_BASE
-#define ELF_ET_DYN_BASE         (TASK32_SIZE / 3 * 2)
+#define ELF_ET_DYN_BASE		(TASK32_SIZE / 3 * 2)
 
 #include <asm/processor.h>
 
@@ -86,8 +86,8 @@
 	pid_t	pr_ppid;
 	pid_t	pr_pgrp;
 	pid_t	pr_sid;
-	struct compat_timeval pr_utime;	/* User time */
-	struct compat_timeval pr_stime;	/* System time */
+	struct compat_timeval pr_utime; /* User time */
+	struct compat_timeval pr_stime; /* System time */
 	struct compat_timeval pr_cutime;/* Cumulative user time */
 	struct compat_timeval pr_cstime;/* Cumulative system time */
 	elf_gregset_t pr_reg;	/* GP registers */
@@ -107,7 +107,7 @@
 	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
 	/* Lots missing */
 	char	pr_fname[16];	/* filename of executable */
-	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
+	char	pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */
 };
 
 #define elf_caddr_t	u32
diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S
index e908e81..64c4fd6 100644
--- a/arch/mips/kernel/bmips_vec.S
+++ b/arch/mips/kernel/bmips_vec.S
@@ -170,7 +170,7 @@
 
 	/* switch to permanent stack and continue booting */
 
-	.global	bmips_secondary_reentry
+	.global bmips_secondary_reentry
 bmips_secondary_reentry:
 	la	k0, bmips_smp_boot_sp
 	lw	sp, 0(k0)
@@ -182,7 +182,7 @@
 #endif /* CONFIG_SMP */
 
 	.align	4
-	.global	bmips_reset_nmi_vec_end
+	.global bmips_reset_nmi_vec_end
 bmips_reset_nmi_vec_end:
 
 END(bmips_reset_nmi_vec)
@@ -206,7 +206,7 @@
 	eret
 
 	.align	4
-	.global	bmips_smp_int_vec_end
+	.global bmips_smp_int_vec_end
 bmips_smp_int_vec_end:
 
 END(bmips_smp_int_vec)
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 4d735d0..83ffe95 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -57,7 +57,7 @@
 	 */
 	case bcond_op:
 		switch (insn.i_format.rt) {
-	 	case bltz_op:
+		case bltz_op:
 		case bltzl_op:
 			if ((long)regs->regs[insn.i_format.rs] < 0) {
 				epc = epc + 4 + (insn.i_format.simmediate << 2);
@@ -197,8 +197,8 @@
 		bit += (bit != 0);
 		bit += 23;
 		switch (insn.i_format.rt & 3) {
-		case 0:	/* bc1f */
-		case 2:	/* bc1fl */
+		case 0: /* bc1f */
+		case 2: /* bc1fl */
 			if (~fcr31 & (1 << bit)) {
 				epc = epc + 4 + (insn.i_format.simmediate << 2);
 				if (insn.i_format.rt == 2)
@@ -208,8 +208,8 @@
 			regs->cp0_epc = epc;
 			break;
 
-		case 1:	/* bc1t */
-		case 3:	/* bc1tl */
+		case 1: /* bc1t */
+		case 3: /* bc1tl */
 			if (fcr31 & (1 << bit)) {
 				epc = epc + 4 + (insn.i_format.simmediate << 2);
 				if (insn.i_format.rt == 3)
diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c
index 69bbfae..15f618b 100644
--- a/arch/mips/kernel/cevt-bcm1480.c
+++ b/arch/mips/kernel/cevt-bcm1480.c
@@ -41,7 +41,7 @@
  * the rest of the system
  */
 static void sibyte_set_mode(enum clock_event_mode mode,
-                           struct clock_event_device *evt)
+			   struct clock_event_device *evt)
 {
 	unsigned int cpu = smp_processor_id();
 	void __iomem *cfg, *init;
@@ -144,7 +144,7 @@
 
 	bcm1480_unmask_irq(cpu, irq);
 
-	action->handler	= sibyte_counter_handler;
+	action->handler = sibyte_counter_handler;
 	action->flags	= IRQF_PERCPU | IRQF_TIMER;
 	action->name	= name;
 	action->dev_id	= cd;
diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c
index ed648cb..ff1f01b 100644
--- a/arch/mips/kernel/cevt-ds1287.c
+++ b/arch/mips/kernel/cevt-ds1287.c
@@ -1,7 +1,7 @@
 /*
  *  DS1287 clockevent driver
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2008	Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -89,7 +89,7 @@
 static struct clock_event_device ds1287_clockevent = {
 	.name		= "ds1287",
 	.features	= CLOCK_EVT_FEAT_PERIODIC,
-	.set_next_event	= ds1287_set_next_event,
+	.set_next_event = ds1287_set_next_event,
 	.set_mode	= ds1287_set_mode,
 	.event_handler	= ds1287_event_handler,
 };
diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c
index 831b475..f069460 100644
--- a/arch/mips/kernel/cevt-gt641xx.c
+++ b/arch/mips/kernel/cevt-gt641xx.c
@@ -1,7 +1,7 @@
 /*
  *  GT641xx clockevent routines.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2007	Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -98,7 +98,7 @@
 	.name		= "gt641xx-timer0",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.irq		= GT641XX_TIMER0_IRQ,
-	.set_next_event	= gt641xx_timer0_set_next_event,
+	.set_next_event = gt641xx_timer0_set_next_event,
 	.set_mode	= gt641xx_timer0_set_mode,
 	.event_handler	= gt641xx_timer0_event_handler,
 };
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 7532392..07b847d 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -25,7 +25,7 @@
 #ifndef CONFIG_MIPS_MT_SMTC
 
 static int mips_next_event(unsigned long delta,
-                           struct clock_event_device *evt)
+			   struct clock_event_device *evt)
 {
 	unsigned int cnt;
 	int res;
@@ -66,7 +66,7 @@
 		goto out;
 
 	/*
-	 * The same applies to performance counter interrupts.  But with the
+	 * The same applies to performance counter interrupts.	But with the
 	 * above we now know that the reason we got here must be a timer
 	 * interrupt.  Being the paranoiacs we are we check anyway.
 	 */
@@ -119,7 +119,7 @@
 	unsigned int cnt;
 
 	/*
-	 * IP7 already pending?  Try to clear it by acking the timer.
+	 * IP7 already pending?	 Try to clear it by acking the timer.
 	 */
 	if (c0_compare_int_pending()) {
 		cnt = read_c0_count();
diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c
index e73439f..200f277 100644
--- a/arch/mips/kernel/cevt-sb1250.c
+++ b/arch/mips/kernel/cevt-sb1250.c
@@ -39,7 +39,7 @@
  * the rest of the system
  */
 static void sibyte_set_mode(enum clock_event_mode mode,
-                           struct clock_event_device *evt)
+			   struct clock_event_device *evt)
 {
 	unsigned int cpu = smp_processor_id();
 	void __iomem *cfg, *init;
@@ -143,7 +143,7 @@
 
 	sb1250_unmask_irq(cpu, irq);
 
-	action->handler	= sibyte_counter_handler;
+	action->handler = sibyte_counter_handler;
 	action->flags	= IRQF_PERCPU | IRQF_TIMER;
 	action->name	= name;
 	action->dev_id	= cd;
diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c
index 2e72d30..9de5ed7 100644
--- a/arch/mips/kernel/cevt-smtc.c
+++ b/arch/mips/kernel/cevt-smtc.c
@@ -49,7 +49,7 @@
 
 /*
  * Timestamps stored are absolute values to be programmed
- * into Count register.  Valid timestamps will never be zero.
+ * into Count register.	 Valid timestamps will never be zero.
  * If a Zero Count value is actually calculated, it is converted
  * to be a 1, which will introduce 1 or two CPU cycles of error
  * roughly once every four billion events, which at 1000 HZ means
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index e5c30b1..2ae0846 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -4,7 +4,7 @@
  * for more details.
  *
  * Based on linux/arch/mips/kernel/cevt-r4k.c,
- *          linux/arch/mips/jmr3927/rbhma3100/setup.c
+ *	    linux/arch/mips/jmr3927/rbhma3100/setup.c
  *
  * Copyright 2001 MontaVista Software Inc.
  * Copyright (C) 2000-2001 Toshiba Corporation
@@ -129,7 +129,7 @@
 				  CLOCK_EVT_FEAT_ONESHOT,
 		.rating		= 200,
 		.set_mode	= txx9tmr_set_mode,
-		.set_next_event	= txx9tmr_set_next_event,
+		.set_next_event = txx9tmr_set_next_event,
 	},
 };
 
@@ -139,7 +139,7 @@
 	struct clock_event_device *cd = &txx9_cd->cd;
 	struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr;
 
-	__raw_writel(0, &tmrptr->tisr);	/* ack interrupt */
+	__raw_writel(0, &tmrptr->tisr); /* ack interrupt */
 	cd->event_handler(cd);
 	return IRQ_HANDLED;
 }
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index d6a1864..de3c25f 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -84,9 +84,9 @@
 		".set	noreorder\n\t"
 		".set	nomacro\n\t"
 		"mult	%2, %3\n\t"
-		"dsll32	%0, %4, %5\n\t"
+		"dsll32 %0, %4, %5\n\t"
 		"mflo	$0\n\t"
-		"dsll32	%1, %4, %5\n\t"
+		"dsll32 %1, %4, %5\n\t"
 		"nop\n\t"
 		".set	pop"
 		: "=&r" (lv1), "=r" (lw)
@@ -239,7 +239,7 @@
 	panic(bug64hit, !DADDI_WAR ? daddiwar : nowar);
 }
 
-int daddiu_bug  = -1;
+int daddiu_bug	= -1;
 
 static inline void check_daddiu(void)
 {
@@ -273,7 +273,7 @@
 #ifdef HAVE_AS_SET_DADDI
 		".set	daddi\n\t"
 #endif
-		"daddiu	%0, %2, %4\n\t"
+		"daddiu %0, %2, %4\n\t"
 		"addiu	%1, $0, %4\n\t"
 		"daddu	%1, %2\n\t"
 		".set	pop"
@@ -292,7 +292,7 @@
 	asm volatile(
 		"addiu	%2, $0, %3\n\t"
 		"dsrl	%2, %2, 1\n\t"
-		"daddiu	%0, %2, %4\n\t"
+		"daddiu %0, %2, %4\n\t"
 		"addiu	%1, $0, %4\n\t"
 		"daddu	%1, %2"
 		: "=&r" (v), "=&r" (w), "=&r" (tmp)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index cce3782..6bfccc2 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -4,7 +4,7 @@
  * Copyright (C) xxxx  the Anonymous
  * Copyright (C) 1994 - 2006 Ralf Baechle
  * Copyright (C) 2003, 2004  Maciej W. Rozycki
- * Copyright (C) 2001, 2004, 2011, 2012  MIPS Technologies, Inc.
+ * Copyright (C) 2001, 2004, 2011, 2012	 MIPS Technologies, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -69,12 +69,12 @@
 			"	wait			\n"
 			"	.set	pop		\n");
 	local_irq_enable();
-	__asm__(" 	.globl __pastwait	\n"
+	__asm__("	.globl __pastwait	\n"
 		"__pastwait:			\n");
 }
 
 /*
- * The RM7000 variant has to handle erratum 38.  The workaround is to not
+ * The RM7000 variant has to handle erratum 38.	 The workaround is to not
  * have any pending stores when the WAIT instruction is executed.
  */
 static void rm7k_wait_irqoff(void)
@@ -201,6 +201,7 @@
 		break;
 
 	case CPU_M14KC:
+	case CPU_M14KEC:
 	case CPU_24K:
 	case CPU_34K:
 	case CPU_1004K:
@@ -331,6 +332,34 @@
 #endif
 }
 
+static void __cpuinit set_isa(struct cpuinfo_mips *c, unsigned int isa)
+{
+	switch (isa) {
+	case MIPS_CPU_ISA_M64R2:
+		c->isa_level |= MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2;
+	case MIPS_CPU_ISA_M64R1:
+		c->isa_level |= MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1;
+	case MIPS_CPU_ISA_V:
+		c->isa_level |= MIPS_CPU_ISA_V;
+	case MIPS_CPU_ISA_IV:
+		c->isa_level |= MIPS_CPU_ISA_IV;
+	case MIPS_CPU_ISA_III:
+		c->isa_level |= MIPS_CPU_ISA_I | MIPS_CPU_ISA_II |
+				MIPS_CPU_ISA_III;
+		break;
+
+	case MIPS_CPU_ISA_M32R2:
+		c->isa_level |= MIPS_CPU_ISA_M32R2;
+	case MIPS_CPU_ISA_M32R1:
+		c->isa_level |= MIPS_CPU_ISA_M32R1;
+	case MIPS_CPU_ISA_II:
+		c->isa_level |= MIPS_CPU_ISA_II;
+	case MIPS_CPU_ISA_I:
+		c->isa_level |= MIPS_CPU_ISA_I;
+		break;
+	}
+}
+
 static char unknown_isa[] __cpuinitdata = KERN_ERR \
 	"Unsupported ISA type, c0.config0: %d.";
 
@@ -348,10 +377,10 @@
 	case 0:
 		switch ((config0 & MIPS_CONF_AR) >> 10) {
 		case 0:
-			c->isa_level = MIPS_CPU_ISA_M32R1;
+			set_isa(c, MIPS_CPU_ISA_M32R1);
 			break;
 		case 1:
-			c->isa_level = MIPS_CPU_ISA_M32R2;
+			set_isa(c, MIPS_CPU_ISA_M32R2);
 			break;
 		default:
 			goto unknown;
@@ -360,10 +389,10 @@
 	case 2:
 		switch ((config0 & MIPS_CONF_AR) >> 10) {
 		case 0:
-			c->isa_level = MIPS_CPU_ISA_M64R1;
+			set_isa(c, MIPS_CPU_ISA_M64R1);
 			break;
 		case 1:
-			c->isa_level = MIPS_CPU_ISA_M64R2;
+			set_isa(c, MIPS_CPU_ISA_M64R2);
 			break;
 		default:
 			goto unknown;
@@ -439,6 +468,10 @@
 		c->ases |= MIPS_ASE_MIPSMT;
 	if (config3 & MIPS_CONF3_ULRI)
 		c->options |= MIPS_CPU_ULRI;
+	if (config3 & MIPS_CONF3_ISA)
+		c->options |= MIPS_CPU_MICROMIPS;
+	if (config3 & MIPS_CONF3_VZ)
+		c->ases |= MIPS_ASE_VZ;
 
 	return config3 & MIPS_CONF_M;
 }
@@ -469,7 +502,7 @@
 	c->scache.flags = MIPS_CACHE_NOT_PRESENT;
 
 	ok = decode_config0(c);			/* Read Config registers.  */
-	BUG_ON(!ok);				/* Arch spec violation!  */
+	BUG_ON(!ok);				/* Arch spec violation!	 */
 	if (ok)
 		ok = decode_config1(c);
 	if (ok)
@@ -494,7 +527,7 @@
 	case PRID_IMP_R2000:
 		c->cputype = CPU_R2000;
 		__cpu_name[cpu] = "R2000";
-		c->isa_level = MIPS_CPU_ISA_I;
+		set_isa(c, MIPS_CPU_ISA_I);
 		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
 			     MIPS_CPU_NOFPUEX;
 		if (__cpu_has_fpu())
@@ -514,7 +547,7 @@
 			c->cputype = CPU_R3000;
 			__cpu_name[cpu] = "R3000";
 		}
-		c->isa_level = MIPS_CPU_ISA_I;
+		set_isa(c, MIPS_CPU_ISA_I);
 		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
 			     MIPS_CPU_NOFPUEX;
 		if (__cpu_has_fpu())
@@ -540,7 +573,7 @@
 			}
 		}
 
-		c->isa_level = MIPS_CPU_ISA_III;
+		set_isa(c, MIPS_CPU_ISA_III);
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_WATCH | MIPS_CPU_VCE |
 			     MIPS_CPU_LLSC;
@@ -580,14 +613,14 @@
 			__cpu_name[cpu] = "NEC Vr41xx";
 			break;
 		}
-		c->isa_level = MIPS_CPU_ISA_III;
+		set_isa(c, MIPS_CPU_ISA_III);
 		c->options = R4K_OPTS;
 		c->tlbsize = 32;
 		break;
 	case PRID_IMP_R4300:
 		c->cputype = CPU_R4300;
 		__cpu_name[cpu] = "R4300";
-		c->isa_level = MIPS_CPU_ISA_III;
+		set_isa(c, MIPS_CPU_ISA_III);
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_LLSC;
 		c->tlbsize = 32;
@@ -595,7 +628,7 @@
 	case PRID_IMP_R4600:
 		c->cputype = CPU_R4600;
 		__cpu_name[cpu] = "R4600";
-		c->isa_level = MIPS_CPU_ISA_III;
+		set_isa(c, MIPS_CPU_ISA_III);
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_LLSC;
 		c->tlbsize = 48;
@@ -610,13 +643,13 @@
 		 */
 		c->cputype = CPU_R4650;
 		__cpu_name[cpu] = "R4650";
-		c->isa_level = MIPS_CPU_ISA_III;
+		set_isa(c, MIPS_CPU_ISA_III);
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
 		c->tlbsize = 48;
 		break;
 	#endif
 	case PRID_IMP_TX39:
-		c->isa_level = MIPS_CPU_ISA_I;
+		set_isa(c, MIPS_CPU_ISA_I);
 		c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE;
 
 		if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
@@ -641,7 +674,7 @@
 	case PRID_IMP_R4700:
 		c->cputype = CPU_R4700;
 		__cpu_name[cpu] = "R4700";
-		c->isa_level = MIPS_CPU_ISA_III;
+		set_isa(c, MIPS_CPU_ISA_III);
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_LLSC;
 		c->tlbsize = 48;
@@ -649,7 +682,7 @@
 	case PRID_IMP_TX49:
 		c->cputype = CPU_TX49XX;
 		__cpu_name[cpu] = "R49XX";
-		c->isa_level = MIPS_CPU_ISA_III;
+		set_isa(c, MIPS_CPU_ISA_III);
 		c->options = R4K_OPTS | MIPS_CPU_LLSC;
 		if (!(c->processor_id & 0x08))
 			c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR;
@@ -658,7 +691,7 @@
 	case PRID_IMP_R5000:
 		c->cputype = CPU_R5000;
 		__cpu_name[cpu] = "R5000";
-		c->isa_level = MIPS_CPU_ISA_IV;
+		set_isa(c, MIPS_CPU_ISA_IV);
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_LLSC;
 		c->tlbsize = 48;
@@ -666,7 +699,7 @@
 	case PRID_IMP_R5432:
 		c->cputype = CPU_R5432;
 		__cpu_name[cpu] = "R5432";
-		c->isa_level = MIPS_CPU_ISA_IV;
+		set_isa(c, MIPS_CPU_ISA_IV);
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_WATCH | MIPS_CPU_LLSC;
 		c->tlbsize = 48;
@@ -674,7 +707,7 @@
 	case PRID_IMP_R5500:
 		c->cputype = CPU_R5500;
 		__cpu_name[cpu] = "R5500";
-		c->isa_level = MIPS_CPU_ISA_IV;
+		set_isa(c, MIPS_CPU_ISA_IV);
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_WATCH | MIPS_CPU_LLSC;
 		c->tlbsize = 48;
@@ -682,7 +715,7 @@
 	case PRID_IMP_NEVADA:
 		c->cputype = CPU_NEVADA;
 		__cpu_name[cpu] = "Nevada";
-		c->isa_level = MIPS_CPU_ISA_IV;
+		set_isa(c, MIPS_CPU_ISA_IV);
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
 		c->tlbsize = 48;
@@ -690,7 +723,7 @@
 	case PRID_IMP_R6000:
 		c->cputype = CPU_R6000;
 		__cpu_name[cpu] = "R6000";
-		c->isa_level = MIPS_CPU_ISA_II;
+		set_isa(c, MIPS_CPU_ISA_II);
 		c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
 			     MIPS_CPU_LLSC;
 		c->tlbsize = 32;
@@ -698,7 +731,7 @@
 	case PRID_IMP_R6000A:
 		c->cputype = CPU_R6000A;
 		__cpu_name[cpu] = "R6000A";
-		c->isa_level = MIPS_CPU_ISA_II;
+		set_isa(c, MIPS_CPU_ISA_II);
 		c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
 			     MIPS_CPU_LLSC;
 		c->tlbsize = 32;
@@ -706,38 +739,38 @@
 	case PRID_IMP_RM7000:
 		c->cputype = CPU_RM7000;
 		__cpu_name[cpu] = "RM7000";
-		c->isa_level = MIPS_CPU_ISA_IV;
+		set_isa(c, MIPS_CPU_ISA_IV);
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_LLSC;
 		/*
-		 * Undocumented RM7000:  Bit 29 in the info register of
+		 * Undocumented RM7000:	 Bit 29 in the info register of
 		 * the RM7000 v2.0 indicates if the TLB has 48 or 64
 		 * entries.
 		 *
-		 * 29      1 =>    64 entry JTLB
-		 *         0 =>    48 entry JTLB
+		 * 29	   1 =>	   64 entry JTLB
+		 *	   0 =>	   48 entry JTLB
 		 */
 		c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48;
 		break;
 	case PRID_IMP_RM9000:
 		c->cputype = CPU_RM9000;
 		__cpu_name[cpu] = "RM9000";
-		c->isa_level = MIPS_CPU_ISA_IV;
+		set_isa(c, MIPS_CPU_ISA_IV);
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_LLSC;
 		/*
 		 * Bit 29 in the info register of the RM9000
 		 * indicates if the TLB has 48 or 64 entries.
 		 *
-		 * 29      1 =>    64 entry JTLB
-		 *         0 =>    48 entry JTLB
+		 * 29	   1 =>	   64 entry JTLB
+		 *	   0 =>	   48 entry JTLB
 		 */
 		c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48;
 		break;
 	case PRID_IMP_R8000:
 		c->cputype = CPU_R8000;
 		__cpu_name[cpu] = "RM8000";
-		c->isa_level = MIPS_CPU_ISA_IV;
+		set_isa(c, MIPS_CPU_ISA_IV);
 		c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
 			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_LLSC;
@@ -746,7 +779,7 @@
 	case PRID_IMP_R10000:
 		c->cputype = CPU_R10000;
 		__cpu_name[cpu] = "R10000";
-		c->isa_level = MIPS_CPU_ISA_IV;
+		set_isa(c, MIPS_CPU_ISA_IV);
 		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
 			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
@@ -756,7 +789,7 @@
 	case PRID_IMP_R12000:
 		c->cputype = CPU_R12000;
 		__cpu_name[cpu] = "R12000";
-		c->isa_level = MIPS_CPU_ISA_IV;
+		set_isa(c, MIPS_CPU_ISA_IV);
 		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
 			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
@@ -766,7 +799,7 @@
 	case PRID_IMP_R14000:
 		c->cputype = CPU_R14000;
 		__cpu_name[cpu] = "R14000";
-		c->isa_level = MIPS_CPU_ISA_IV;
+		set_isa(c, MIPS_CPU_ISA_IV);
 		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
 			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
@@ -786,7 +819,7 @@
 			break;
 		}
 
-		c->isa_level = MIPS_CPU_ISA_III;
+		set_isa(c, MIPS_CPU_ISA_III);
 		c->options = R4K_OPTS |
 			     MIPS_CPU_FPU | MIPS_CPU_LLSC |
 			     MIPS_CPU_32FPR;
@@ -838,10 +871,13 @@
 		__cpu_name[cpu] = "MIPS 20Kc";
 		break;
 	case PRID_IMP_24K:
-	case PRID_IMP_24KE:
 		c->cputype = CPU_24K;
 		__cpu_name[cpu] = "MIPS 24Kc";
 		break;
+	case PRID_IMP_24KE:
+		c->cputype = CPU_24K;
+		__cpu_name[cpu] = "MIPS 24KEc";
+		break;
 	case PRID_IMP_25KF:
 		c->cputype = CPU_25KF;
 		__cpu_name[cpu] = "MIPS 25Kc";
@@ -858,6 +894,10 @@
 		c->cputype = CPU_M14KC;
 		__cpu_name[cpu] = "MIPS M14Kc";
 		break;
+	case PRID_IMP_M14KEC:
+		c->cputype = CPU_M14KEC;
+		__cpu_name[cpu] = "MIPS M14KEc";
+		break;
 	case PRID_IMP_1004K:
 		c->cputype = CPU_1004K;
 		__cpu_name[cpu] = "MIPS 1004Kc";
@@ -946,7 +986,7 @@
 	case PRID_IMP_PR4450:
 		c->cputype = CPU_PR4450;
 		__cpu_name[cpu] = "Philips PR4450";
-		c->isa_level = MIPS_CPU_ISA_M32R1;
+		set_isa(c, MIPS_CPU_ISA_M32R1);
 		break;
 	}
 }
@@ -1053,12 +1093,12 @@
 		return;
 	}
 
-	c->options = (MIPS_CPU_TLB       |
-			MIPS_CPU_4KEX    |
+	c->options = (MIPS_CPU_TLB	 |
+			MIPS_CPU_4KEX	 |
 			MIPS_CPU_COUNTER |
-			MIPS_CPU_DIVEC   |
-			MIPS_CPU_WATCH   |
-			MIPS_CPU_EJTAG   |
+			MIPS_CPU_DIVEC	 |
+			MIPS_CPU_WATCH	 |
+			MIPS_CPU_EJTAG	 |
 			MIPS_CPU_LLSC);
 
 	switch (c->processor_id & 0xff00) {
@@ -1105,12 +1145,12 @@
 	}
 
 	if (c->cputype == CPU_XLP) {
-		c->isa_level = MIPS_CPU_ISA_M64R2;
+		set_isa(c, MIPS_CPU_ISA_M64R2);
 		c->options |= (MIPS_CPU_FPU | MIPS_CPU_ULRI | MIPS_CPU_MCHECK);
 		/* This will be updated again after all threads are woken up */
 		c->tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
 	} else {
-		c->isa_level = MIPS_CPU_ISA_M64R1;
+		set_isa(c, MIPS_CPU_ISA_M64R1);
 		c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1;
 	}
 }
@@ -1129,7 +1169,7 @@
 	struct cpuinfo_mips *c = &current_cpu_data;
 	unsigned int cpu = smp_processor_id();
 
-	c->processor_id	= PRID_IMP_UNKNOWN;
+	c->processor_id = PRID_IMP_UNKNOWN;
 	c->fpu_id	= FPIR_IMP_NONE;
 	c->cputype	= CPU_UNKNOWN;
 
diff --git a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
index e7c98e2..3237c52 100644
--- a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
+++ b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
@@ -107,6 +107,8 @@
 static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
 	int i;
+	unsigned long rate;
+	int ret;
 
 	if (!cpu_online(policy->cpu))
 		return -ENODEV;
@@ -117,15 +119,22 @@
 		return PTR_ERR(cpuclk);
 	}
 
-	cpuclk->rate = cpu_clock_freq / 1000;
-	if (!cpuclk->rate)
+	rate = cpu_clock_freq / 1000;
+	if (!rate) {
+		clk_put(cpuclk);
 		return -EINVAL;
+	}
+	ret = clk_set_rate(cpuclk, rate);
+	if (ret) {
+		clk_put(cpuclk);
+		return ret;
+	}
 
 	/* clock table init */
 	for (i = 2;
 	     (loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END);
 	     i++)
-		loongson2_clockmod_table[i].frequency = (cpuclk->rate * i) / 8;
+		loongson2_clockmod_table[i].frequency = (rate * i) / 8;
 
 	policy->cur = loongson2_cpufreq_get(policy->cpu);
 
@@ -195,8 +204,8 @@
 
 	spin_lock_irqsave(&loongson2_wait_lock, flags);
 	cpu_freq = LOONGSON_CHIPCFG0;
-	LOONGSON_CHIPCFG0 &= ~0x7;      /* Put CPU into wait mode */
-	LOONGSON_CHIPCFG0 = cpu_freq;   /* Restore CPU state */
+	LOONGSON_CHIPCFG0 &= ~0x7;	/* Put CPU into wait mode */
+	LOONGSON_CHIPCFG0 = cpu_freq;	/* Restore CPU state */
 	spin_unlock_irqrestore(&loongson2_wait_lock, flags);
 }
 
diff --git a/arch/mips/kernel/crash.c b/arch/mips/kernel/crash.c
index 0f53c39..93aa302 100644
--- a/arch/mips/kernel/crash.c
+++ b/arch/mips/kernel/crash.c
@@ -59,7 +59,7 @@
 
 #else /* !defined(CONFIG_SMP)  */
 static void crash_kexec_prepare_cpus(void) {}
-#endif /* !defined(CONFIG_SMP)  */
+#endif /* !defined(CONFIG_SMP)	*/
 
 void default_machine_crash_shutdown(struct pt_regs *regs)
 {
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
index f96f99c..468f3eb 100644
--- a/arch/mips/kernel/csrc-bcm1480.c
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -35,7 +35,7 @@
 
 struct clocksource bcm1480_clocksource = {
 	.name	= "zbbus-cycles",
-	.rating	= 200,
+	.rating = 200,
 	.read	= bcm1480_hpt_read,
 	.mask	= CLOCKSOURCE_MASK(64),
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
diff --git a/arch/mips/kernel/csrc-gic.c b/arch/mips/kernel/csrc-gic.c
new file mode 100644
index 0000000..5dca24b
--- /dev/null
+++ b/arch/mips/kernel/csrc-gic.c
@@ -0,0 +1,49 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+
+#include <asm/time.h>
+#include <asm/gic.h>
+
+static cycle_t gic_hpt_read(struct clocksource *cs)
+{
+	unsigned int hi, hi2, lo;
+
+	do {
+		GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_63_32), hi);
+		GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), lo);
+		GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_63_32), hi2);
+	} while (hi2 != hi);
+
+	return (((cycle_t) hi) << 32) + lo;
+}
+
+static struct clocksource gic_clocksource = {
+	.name	= "GIC",
+	.read	= gic_hpt_read,
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init gic_clocksource_init(unsigned int frequency)
+{
+	unsigned int config, bits;
+
+	/* Calculate the clocksource mask. */
+	GICREAD(GIC_REG(SHARED, GIC_SH_CONFIG), config);
+	bits = 32 + ((config & GIC_SH_CONFIG_COUNTBITS_MSK) >>
+		(GIC_SH_CONFIG_COUNTBITS_SHF - 2));
+
+	/* Set clocksource mask. */
+	gic_clocksource.mask = CLOCKSOURCE_MASK(bits);
+
+	/* Calculate a somewhat reasonable rating value. */
+	gic_clocksource.rating = 200 + frequency / 10000000;
+
+	clocksource_register_hz(&gic_clocksource, frequency);
+}
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index 46bd7fa..0654bff 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -1,7 +1,7 @@
 /*
  *  DEC I/O ASIC's counter clocksource
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2008	Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c
index 2e7c523..abd99ea 100644
--- a/arch/mips/kernel/csrc-powertv.c
+++ b/arch/mips/kernel/csrc-powertv.c
@@ -45,7 +45,7 @@
 	m = PLL_GET_M(pll_reg);
 	n = PLL_GET_N(pll_reg);
 	p = PLL_GET_P(pll_reg);
-	pr_info("MIPS PLL Register:0x%x  M=%d  N=%d  P=%d\n", pll_reg, m, n, p);
+	pr_info("MIPS PLL Register:0x%x	 M=%d  N=%d  P=%d\n", pll_reg, m, n, p);
 
 	/* Calculate clock frequency = (2 * N * 54MHz) / (M * (2**P)) */
 	fout = ((2 * n * fin) / (m * (0x01 << p)));
@@ -83,8 +83,8 @@
 
 /**
  * struct tim_c - free running counter
- * @hi:	High 16 bits of the counter
- * @lo:	Low 32 bits of the counter
+ * @hi: High 16 bits of the counter
+ * @lo: Low 32 bits of the counter
  *
  * Lays out the structure of the free running counter in memory. This counter
  * increments at a rate of 27 MHz/8 on all platforms.
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
index e9606d9..6ecb77d 100644
--- a/arch/mips/kernel/csrc-sb1250.c
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -44,7 +44,7 @@
 
 struct clocksource bcm1250_clocksource = {
 	.name	= "bcm1250-counter-3",
-	.rating	= 200,
+	.rating = 200,
 	.read	= sb1250_hpt_read,
 	.mask	= CLOCKSOURCE_MASK(23),
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c
index 9ae813e..9e6440e 100644
--- a/arch/mips/kernel/early_printk.c
+++ b/arch/mips/kernel/early_printk.c
@@ -14,8 +14,7 @@
 
 extern void prom_putchar(char);
 
-static void __init
-early_console_write(struct console *con, const char *s, unsigned n)
+static void early_console_write(struct console *con, const char *s, unsigned n)
 {
 	while (n-- && *s) {
 		if (*s == '\n')
@@ -25,7 +24,7 @@
 	}
 }
 
-static struct console early_console __initdata = {
+static struct console early_console = {
 	.name	= "early",
 	.write	= early_console_write,
 	.flags	= CON_PRINTBUFFER | CON_BOOT,
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index 83fa146..cf5509f 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -125,21 +125,21 @@
  *
  * 2.1 For KBUILD_MCOUNT_RA_ADDRESS and CONFIG_32BIT
  *
- * lui v1, hi_16bit_of_mcount        --> b 1f (0x10000005)
+ * lui v1, hi_16bit_of_mcount	     --> b 1f (0x10000005)
  * addiu v1, v1, low_16bit_of_mcount
  * move at, ra
  * move $12, ra_address
  * jalr v1
  *  sub sp, sp, 8
- *                                  1: offset = 5 instructions
+ *				    1: offset = 5 instructions
  * 2.2 For the Other situations
  *
- * lui v1, hi_16bit_of_mcount        --> b 1f (0x10000004)
+ * lui v1, hi_16bit_of_mcount	     --> b 1f (0x10000004)
  * addiu v1, v1, low_16bit_of_mcount
  * move at, ra
  * jalr v1
  *  nop | move $12, ra_address | sub sp, sp, 8
- *                                  1: offset = 4 instructions
+ *				    1: offset = 4 instructions
  */
 
 #define INSN_B_1F (0x10000000 | MCOUNT_OFFSET_INSNS)
@@ -228,8 +228,8 @@
 
 #ifndef KBUILD_MCOUNT_RA_ADDRESS
 
-#define S_RA_SP	(0xafbf << 16)	/* s{d,w} ra, offset(sp) */
-#define S_R_SP	(0xafb0 << 16)  /* s{d,w} R, offset(sp) */
+#define S_RA_SP (0xafbf << 16)	/* s{d,w} ra, offset(sp) */
+#define S_R_SP	(0xafb0 << 16)	/* s{d,w} R, offset(sp) */
 #define OFFSET_MASK	0xffff	/* stack offset range: 0 ~ PT_SIZE */
 
 unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 8a0096d..ecb347c 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -160,7 +160,7 @@
 	.set pop
 	.endm
 
-	.align  5
+	.align	5
 BUILD_ROLLBACK_PROLOGUE handle_int
 NESTED(handle_int, PT_SIZE, sp)
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -362,7 +362,7 @@
 	.set	push
 	.set	noat
 	SAVE_ALL
- 	move	a0, sp
+	move	a0, sp
 	jal	nmi_exception_handler
 	RESTORE_ALL
 	.set	mips3
@@ -409,7 +409,7 @@
 	   string escapes and emits bogus warnings if it believes to
 	   recognize an unknown escape code.  So make the arguments
 	   start with an n and gas will believe \n is ok ...  */
-	.macro	__BUILD_verbose	nexception
+	.macro	__BUILD_verbose nexception
 	LONG_L	a1, PT_EPC(sp)
 #ifdef CONFIG_32BIT
 	PRINT("Got \nexception at %08lx\012")
@@ -442,7 +442,7 @@
 	.endm
 
 	.macro	BUILD_HANDLER exception handler clear verbose
-	__BUILD_HANDLER	\exception \handler \clear \verbose _int
+	__BUILD_HANDLER \exception \handler \clear \verbose _int
 	.endm
 
 	BUILD_HANDLER adel ade ade silent		/* #4  */
@@ -456,7 +456,7 @@
 	BUILD_HANDLER tr tr sti silent			/* #13 */
 	BUILD_HANDLER fpe fpe fpe silent		/* #15 */
 	BUILD_HANDLER mdmx mdmx sti silent		/* #22 */
-#ifdef 	CONFIG_HARDWARE_WATCHPOINTS
+#ifdef	CONFIG_HARDWARE_WATCHPOINTS
 	/*
 	 * For watch, interrupts will be enabled after the watch
 	 * registers are read.
@@ -482,8 +482,8 @@
 	MFC0	k1, CP0_ENTRYHI
 	andi	k1, 0xff	/* ASID_MASK */
 	MFC0	k0, CP0_EPC
-	PTR_SRL	k0, _PAGE_SHIFT + 1
-	PTR_SLL	k0, _PAGE_SHIFT + 1
+	PTR_SRL k0, _PAGE_SHIFT + 1
+	PTR_SLL k0, _PAGE_SHIFT + 1
 	or	k1, k0
 	MTC0	k1, CP0_ENTRYHI
 	mtc0_tlbw_hazard
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index fcf9731..c61cdae 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -133,7 +133,7 @@
 #ifdef CONFIG_BOOT_RAW
 	/*
 	 * Give us a fighting chance of running if execution beings at the
-	 * kernel load address.  This is needed because this platform does
+	 * kernel load address.	 This is needed because this platform does
 	 * not have a ELF loader yet.
 	 */
 FEXPORT(__kernel_entry)
@@ -201,7 +201,7 @@
 
 #ifdef CONFIG_SMP
 /*
- * SMP slave cpus entry point.  Board specific code for bootstrap calls this
+ * SMP slave cpus entry point.	Board specific code for bootstrap calls this
  * function after setting up the stack and gp registers.
  */
 NESTED(smp_bootstrap, 16, sp)
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index 32b397b..2b91fe8 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -178,7 +178,7 @@
 	} else {
 		inb(PIC_MASTER_IMR);	/* DUMMY - (do we need this?) */
 		outb(cached_master_mask, PIC_MASTER_IMR);
-		outb(0x60+irq, PIC_MASTER_CMD);	/* 'Specific EOI to master */
+		outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */
 	}
 	smtc_im_ack_irq(irq);
 	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c
index 883fc6c..44a1f79 100644
--- a/arch/mips/kernel/irq-gt641xx.c
+++ b/arch/mips/kernel/irq-gt641xx.c
@@ -1,7 +1,7 @@
 /*
  *  GT641xx IRQ routines.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2007	Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -25,7 +25,7 @@
 
 #include <asm/gt64120.h>
 
-#define GT641XX_IRQ_TO_BIT(irq)	(1U << (irq - GT641XX_IRQ_BASE))
+#define GT641XX_IRQ_TO_BIT(irq) (1U << (irq - GT641XX_IRQ_BASE))
 
 static DEFINE_RAW_SPINLOCK(gt641xx_irq_lock);
 
diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c
index 14ac52c..fab40f7 100644
--- a/arch/mips/kernel/irq-msc01.c
+++ b/arch/mips/kernel/irq-msc01.c
@@ -1,6 +1,6 @@
 /*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  *
@@ -86,7 +86,7 @@
  */
 void ll_msc_irq(void)
 {
- 	unsigned int irq;
+	unsigned int irq;
 
 	/* read the interrupt vector register */
 	MSCIC_READ(MSC01_IC_VEC, irq);
diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c
index b0662cf..26f4e4c 100644
--- a/arch/mips/kernel/irq-rm7000.c
+++ b/arch/mips/kernel/irq-rm7000.c
@@ -1,8 +1,8 @@
 /*
  * Copyright (C) 2003 Ralf Baechle
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  *
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index a5aa43d..d1fea7a 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -48,7 +48,7 @@
 }
 
 /*
- * Allocate the 16 legacy interrupts for i8259 devices.  This happens early
+ * Allocate the 16 legacy interrupts for i8259 devices.	 This happens early
  * in the kernel initialization so treating allocation failure as BUG() is
  * ok.
  */
diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
index 972263b..72ef2d2 100644
--- a/arch/mips/kernel/irq_cpu.c
+++ b/arch/mips/kernel/irq_cpu.c
@@ -3,13 +3,13 @@
  * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
  *
  * Copyright (C) 2001 Ralf Baechle
- * Copyright (C) 2005  MIPS Technologies, Inc.  All rights reserved.
- *      Author: Maciej W. Rozycki <macro@mips.com>
+ * Copyright (C) 2005  MIPS Technologies, Inc.	All rights reserved.
+ *	Author: Maciej W. Rozycki <macro@mips.com>
  *
  * This file define the irq handler for MIPS CPU interrupts.
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -31,6 +31,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
+#include <linux/irqdomain.h>
 
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
@@ -113,3 +114,44 @@
 		irq_set_chip_and_handler(i, &mips_cpu_irq_controller,
 					 handle_percpu_irq);
 }
+
+#ifdef CONFIG_IRQ_DOMAIN
+static int mips_cpu_intc_map(struct irq_domain *d, unsigned int irq,
+			     irq_hw_number_t hw)
+{
+	static struct irq_chip *chip;
+
+	if (hw < 2 && cpu_has_mipsmt) {
+		/* Software interrupts are used for MT/CMT IPI */
+		chip = &mips_mt_cpu_irq_controller;
+	} else {
+		chip = &mips_cpu_irq_controller;
+	}
+
+	irq_set_chip_and_handler(irq, chip, handle_percpu_irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = {
+	.map = mips_cpu_intc_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+int __init mips_cpu_intc_init(struct device_node *of_node,
+			      struct device_node *parent)
+{
+	struct irq_domain *domain;
+
+	/* Mask interrupts. */
+	clear_c0_status(ST0_IM);
+	clear_c0_cause(CAUSEF_IP);
+
+	domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0,
+				       &mips_cpu_intc_irq_domain_ops, NULL);
+	if (!domain)
+		panic("Failed to add irqdomain for MIPS CPU\n");
+
+	return 0;
+}
+#endif /* CONFIG_IRQ_DOMAIN */
diff --git a/arch/mips/kernel/irq_txx9.c b/arch/mips/kernel/irq_txx9.c
index b0c55b5..ab00e49 100644
--- a/arch/mips/kernel/irq_txx9.c
+++ b/arch/mips/kernel/irq_txx9.c
@@ -1,12 +1,12 @@
 /*
  * Based on linux/arch/mips/jmr3927/rbhma3100/irq.c,
- *          linux/arch/mips/tx4927/common/tx4927_irq.c,
- *          linux/arch/mips/tx4938/common/irq.c
+ *	    linux/arch/mips/tx4927/common/tx4927_irq.c,
+ *	    linux/arch/mips/tx4938/common/irq.c
  *
  * Copyright 2001, 2003-2005 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
- *         ahennessy@mvista.com
- *         source@mvista.com
+ *	   ahennessy@mvista.com
+ *	   source@mvista.com
  * Copyright (C) 2000-2001 Toshiba Corporation
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -122,7 +122,7 @@
 	switch (flow_type & IRQF_TRIGGER_MASK) {
 	case IRQF_TRIGGER_RISING:	mode = TXx9_IRCR_UP;	break;
 	case IRQF_TRIGGER_FALLING:	mode = TXx9_IRCR_DOWN;	break;
-	case IRQF_TRIGGER_HIGH:	mode = TXx9_IRCR_HIGH;	break;
+	case IRQF_TRIGGER_HIGH: mode = TXx9_IRCR_HIGH;	break;
 	case IRQF_TRIGGER_LOW:	mode = TXx9_IRCR_LOW;	break;
 	default:
 		return -EINVAL;
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index 23817a6..fcaac2f 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -40,7 +40,7 @@
 	{ 6, SIGBUS },		/* instruction bus error */
 	{ 7, SIGBUS },		/* data bus error */
 	{ 9, SIGTRAP },		/* break */
-/*	{ 11, SIGILL },	*/	/* CPU unusable */
+/*	{ 11, SIGILL }, */	/* CPU unusable */
 	{ 12, SIGFPE },		/* overflow */
 	{ 13, SIGTRAP },	/* trap */
 	{ 14, SIGSEGV },	/* virtual instruction cache coherency */
@@ -321,7 +321,7 @@
 		.regs	= regs,
 		.str	= str,
 		.err	= err,
-		.trapnr	= trap,
+		.trapnr = trap,
 		.signr	= sig,
 
 	};
@@ -371,7 +371,7 @@
 	union mips_instruction insn = {
 		.r_format = {
 			.opcode = spec_op,
-			.func   = break_op,
+			.func	= break_op,
 		}
 	};
 	memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE);
diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
index ce3f080..12bc4eb 100644
--- a/arch/mips/kernel/kprobes.c
+++ b/arch/mips/kernel/kprobes.c
@@ -307,7 +307,7 @@
 /*
  * Called after single-stepping.  p->addr is the address of the
  * instruction whose first byte has been replaced by the "break 0"
- * instruction.  To avoid the SMP problems that can occur when we
+ * instruction.	 To avoid the SMP problems that can occur when we
  * temporarily put back the original opcode to single-step, we
  * single-stepped a copy of the instruction.  The address of this
  * copy is p->ainsn.insn.
@@ -535,7 +535,7 @@
 
 void __kprobes jprobe_return(void)
 {
-	/* Assembler quirk necessitates this '0,code' business.  */
+	/* Assembler quirk necessitates this '0,code' business.	 */
 	asm volatile(
 		"break 0,%0\n\t"
 		".globl jprobe_return_end\n"
@@ -614,9 +614,9 @@
 	 * We can handle this because:
 	 *     - instances are always inserted at the head of the list
 	 *     - when multiple return probes are registered for the same
-	 *       function, the first instance's ret_addr will point to the
-	 *       real return address, and all the rest will point to
-	 *       kretprobe_trampoline
+	 *	 function, the first instance's ret_addr will point to the
+	 *	 real return address, and all the rest will point to
+	 *	 kretprobe_trampoline
 	 */
 	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
 		if (ri->task != current)
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 253bd8a..8eeee1c8 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -76,7 +76,7 @@
 	return error;
 }
 
-#define RLIM_INFINITY32	0x7fffffff
+#define RLIM_INFINITY32 0x7fffffff
 #define RESOURCE32(x) ((x > RLIM_INFINITY32) ? RLIM_INFINITY32 : x)
 
 struct rlimit32 {
@@ -105,7 +105,7 @@
 
 /* From the Single Unix Spec: pread & pwrite act like lseek to pos + op +
    lseek back to original location.  They fail just like lseek does on
-   non-seekable files.  */
+   non-seekable files.	*/
 
 SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count,
 	unsigned long, unused, unsigned long, a4, unsigned long, a5)
@@ -247,7 +247,7 @@
 }
 
 asmlinkage ssize_t sys32_readahead(int fd, u32 pad0, u64 a2, u64 a3,
-                                   size_t count)
+				   size_t count)
 {
 	return sys_readahead(fd, merge_64(a2, a3), count);
 }
@@ -276,7 +276,7 @@
 	unsigned offset_a3, unsigned len_a4, unsigned len_a5)
 {
 	return sys_fallocate(fd, mode, merge_64(offset_a2, offset_a3),
-	                     merge_64(len_a4, len_a5));
+			     merge_64(len_a4, len_a5));
 }
 
 asmlinkage long sys32_lookup_dcookie(u32 a0, u32 a1, char __user *buf,
@@ -286,7 +286,7 @@
 }
 
 SYSCALL_DEFINE6(32_fanotify_mark, int, fanotify_fd, unsigned int, flags,
-		u64, a3, u64, a4, int, dfd, const char  __user *, pathname)
+		u64, a3, u64, a4, int, dfd, const char	__user *, pathname)
 {
 	return sys_fanotify_mark(fanotify_fd, flags, merge_64(a3, a4),
 				 dfd, pathname);
diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c
index df1e3e4..6e58e97 100644
--- a/arch/mips/kernel/mips_ksyms.c
+++ b/arch/mips/kernel/mips_ksyms.c
@@ -17,9 +17,9 @@
 
 extern void *__bzero(void *__s, size_t __count);
 extern long __strncpy_from_user_nocheck_asm(char *__to,
-                                            const char *__from, long __len);
+					    const char *__from, long __len);
 extern long __strncpy_from_user_asm(char *__to, const char *__from,
-                                    long __len);
+				    long __len);
 extern long __strlen_user_nocheck_asm(const char *s);
 extern long __strlen_user_asm(const char *s);
 extern long __strnlen_user_nocheck_asm(const char *s);
diff --git a/arch/mips/kernel/module-rela.c b/arch/mips/kernel/module-rela.c
index 61d6002..2b70723 100644
--- a/arch/mips/kernel/module-rela.c
+++ b/arch/mips/kernel/module-rela.c
@@ -55,7 +55,7 @@
 static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v)
 {
 	*location = (*location & 0xffff0000) |
-	            ((((long long) v + 0x8000LL) >> 16) & 0xffff);
+		    ((((long long) v + 0x8000LL) >> 16) & 0xffff);
 
 	return 0;
 }
@@ -78,7 +78,7 @@
 				    Elf_Addr v)
 {
 	*location = (*location & 0xffff0000) |
-	            ((((long long) v + 0x80008000LL) >> 32) & 0xffff);
+		    ((((long long) v + 0x80008000LL) >> 32) & 0xffff);
 
 	return 0;
 }
@@ -87,7 +87,7 @@
 				     Elf_Addr v)
 {
 	*location = (*location & 0xffff0000) |
-	            ((((long long) v + 0x800080008000LL) >> 48) & 0xffff);
+		    ((((long long) v + 0x800080008000LL) >> 48) & 0xffff);
 
 	return 0;
 }
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 07ff581..977a623 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -79,7 +79,7 @@
 	}
 
 	*location = (*location & ~0x03ffffff) |
-	            ((*location + (v >> 2)) & 0x03ffffff);
+		    ((*location + (v >> 2)) & 0x03ffffff);
 
 	return 0;
 }
@@ -122,7 +122,7 @@
 	struct mips_hi16 *l;
 	Elf_Addr val, vallo;
 
-	/* Sign extend the addend we extract from the lo insn.  */
+	/* Sign extend the addend we extract from the lo insn.	*/
 	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
 
 	if (me->arch.r_mips_hi16_list != NULL) {
@@ -165,7 +165,7 @@
 	}
 
 	/*
-	 * Ok, we're done with the HI16 relocs.  Now deal with the LO16.
+	 * Ok, we're done with the HI16 relocs.	 Now deal with the LO16.
 	 */
 	val = v + vallo;
 	insnlo = (insnlo & ~0xffff) | (val & 0xffff);
@@ -230,7 +230,7 @@
 	}
 
 	/*
-	 * Normally the hi16 list should be deallocated at this point.  A
+	 * Normally the hi16 list should be deallocated at this point.	A
 	 * malformed binary however could contain a series of R_MIPS_HI16
 	 * relocations not followed by a R_MIPS_LO16 relocation.  In that
 	 * case, free up the list and return an error.
@@ -261,7 +261,7 @@
 	spin_unlock_irqrestore(&dbe_lock, flags);
 
 	/* Now, if we found one, we are running inside it now, hence
-           we cannot unload the module, hence no refcnt needed. */
+	   we cannot unload the module, hence no refcnt needed. */
 	return e;
 }
 
diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S
index 207f134..0e23343 100644
--- a/arch/mips/kernel/octeon_switch.S
+++ b/arch/mips/kernel/octeon_switch.S
@@ -30,7 +30,7 @@
 
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
- *                     struct thread_info *next_ti, int usedfpu)
+ *		       struct thread_info *next_ti, int usedfpu)
  */
 	.align	7
 	LEAF(resume)
@@ -69,7 +69,7 @@
 1:
 #if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
 	/* Check if we need to store CVMSEG state */
-	mfc0	t0, $11,7 	/* CvmMemCtl */
+	mfc0	t0, $11,7	/* CvmMemCtl */
 	bbit0	t0, 6, 3f	/* Is user access enabled? */
 
 	/* Store the CVMSEG state */
@@ -77,8 +77,8 @@
 	andi	t0, 0x3f
 	/* Multiply * (cache line size/sizeof(long)/2) */
 	sll	t0, 7-LONGLOG-1
-	li	t1, -32768 	/* Base address of CVMSEG */
-	LONG_ADDI t2, a0, THREAD_CVMSEG	/* Where to store CVMSEG to */
+	li	t1, -32768	/* Base address of CVMSEG */
+	LONG_ADDI t2, a0, THREAD_CVMSEG /* Where to store CVMSEG to */
 	synciobdma
 2:
 	.set noreorder
@@ -89,13 +89,13 @@
 	LONG_S	t8, 0(t2)	/* Store CVMSEG to thread storage */
 	LONG_ADDU t2, LONGSIZE*2 /* Increment loc in thread storage */
 	bnez	t0, 2b		/* Loop until we've copied it all */
-	 LONG_S	t9, -LONGSIZE(t2)/* Store CVMSEG to thread storage */
+	 LONG_S t9, -LONGSIZE(t2)/* Store CVMSEG to thread storage */
 	.set reorder
 
 	/* Disable access to CVMSEG */
-	mfc0	t0, $11,7 	/* CvmMemCtl */
+	mfc0	t0, $11,7	/* CvmMemCtl */
 	xori	t0, t0, 0x40	/* Bit 6 is CVMSEG user enable */
-	mtc0	t0, $11,7 	/* CvmMemCtl */
+	mtc0	t0, $11,7	/* CvmMemCtl */
 #endif
 3:
 	/*
@@ -133,7 +133,7 @@
 
 	dmfc0	t9, $9,7	/* CvmCtl register. */
 
-        /* Save the COP2 CRC state */
+	/* Save the COP2 CRC state */
 	dmfc2	t0, 0x0201
 	dmfc2	t1, 0x0202
 	dmfc2	t2, 0x0200
@@ -149,30 +149,30 @@
 	sd	t0, OCTEON_CP2_LLM_DAT(a0)
 	sd	t1, OCTEON_CP2_LLM_DAT+8(a0)
 
-1:      bbit1	t9, 26, 3f	/* done if CvmCtl[NOCRYPTO] set */
+1:	bbit1	t9, 26, 3f	/* done if CvmCtl[NOCRYPTO] set */
 
 	/* Save the COP2 crypto state */
-        /* this part is mostly common to both pass 1 and later revisions */
-	dmfc2 	t0, 0x0084
-	dmfc2 	t1, 0x0080
-	dmfc2 	t2, 0x0081
-	dmfc2 	t3, 0x0082
+	/* this part is mostly common to both pass 1 and later revisions */
+	dmfc2	t0, 0x0084
+	dmfc2	t1, 0x0080
+	dmfc2	t2, 0x0081
+	dmfc2	t3, 0x0082
 	sd	t0, OCTEON_CP2_3DES_IV(a0)
-	dmfc2 	t0, 0x0088
+	dmfc2	t0, 0x0088
 	sd	t1, OCTEON_CP2_3DES_KEY(a0)
-	dmfc2 	t1, 0x0111                      /* only necessary for pass 1 */
+	dmfc2	t1, 0x0111			/* only necessary for pass 1 */
 	sd	t2, OCTEON_CP2_3DES_KEY+8(a0)
-	dmfc2 	t2, 0x0102
+	dmfc2	t2, 0x0102
 	sd	t3, OCTEON_CP2_3DES_KEY+16(a0)
-	dmfc2 	t3, 0x0103
+	dmfc2	t3, 0x0103
 	sd	t0, OCTEON_CP2_3DES_RESULT(a0)
-	dmfc2 	t0, 0x0104
-	sd	t1, OCTEON_CP2_AES_INP0(a0)     /* only necessary for pass 1 */
-	dmfc2 	t1, 0x0105
+	dmfc2	t0, 0x0104
+	sd	t1, OCTEON_CP2_AES_INP0(a0)	/* only necessary for pass 1 */
+	dmfc2	t1, 0x0105
 	sd	t2, OCTEON_CP2_AES_IV(a0)
 	dmfc2	t2, 0x0106
 	sd	t3, OCTEON_CP2_AES_IV+8(a0)
-	dmfc2 	t3, 0x0107
+	dmfc2	t3, 0x0107
 	sd	t0, OCTEON_CP2_AES_KEY(a0)
 	dmfc2	t0, 0x0110
 	sd	t1, OCTEON_CP2_AES_KEY+8(a0)
@@ -180,7 +180,7 @@
 	sd	t2, OCTEON_CP2_AES_KEY+16(a0)
 	dmfc2	t2, 0x0101
 	sd	t3, OCTEON_CP2_AES_KEY+24(a0)
-	mfc0	t3, $15,0 	/* Get the processor ID register */
+	mfc0	t3, $15,0	/* Get the processor ID register */
 	sd	t0, OCTEON_CP2_AES_KEYLEN(a0)
 	li	t0, 0x000d0000	/* This is the processor ID of Octeon Pass1 */
 	sd	t1, OCTEON_CP2_AES_RESULT(a0)
@@ -188,7 +188,7 @@
 	/* Skip to the Pass1 version of the remainder of the COP2 state */
 	beq	t3, t0, 2f
 
-        /* the non-pass1 state when !CvmCtl[NOCRYPTO] */
+	/* the non-pass1 state when !CvmCtl[NOCRYPTO] */
 	dmfc2	t1, 0x0240
 	dmfc2	t2, 0x0241
 	dmfc2	t3, 0x0242
@@ -214,7 +214,7 @@
 	sd	t2, OCTEON_CP2_HSH_DATW+72(a0)
 	dmfc2	t2, 0x024D
 	sd	t3, OCTEON_CP2_HSH_DATW+80(a0)
-	dmfc2 	t3, 0x024E
+	dmfc2	t3, 0x024E
 	sd	t0, OCTEON_CP2_HSH_DATW+88(a0)
 	dmfc2	t0, 0x0250
 	sd	t1, OCTEON_CP2_HSH_DATW+96(a0)
@@ -232,9 +232,9 @@
 	sd	t3, OCTEON_CP2_HSH_IVW+24(a0)
 	dmfc2	t3, 0x0257
 	sd	t0, OCTEON_CP2_HSH_IVW+32(a0)
-	dmfc2 	t0, 0x0258
+	dmfc2	t0, 0x0258
 	sd	t1, OCTEON_CP2_HSH_IVW+40(a0)
-	dmfc2 	t1, 0x0259
+	dmfc2	t1, 0x0259
 	sd	t2, OCTEON_CP2_HSH_IVW+48(a0)
 	dmfc2	t2, 0x025E
 	sd	t3, OCTEON_CP2_HSH_IVW+56(a0)
@@ -247,7 +247,7 @@
 	sd	t0, OCTEON_CP2_GFM_RESULT+8(a0)
 	jr	ra
 
-2:      /* pass 1 special stuff when !CvmCtl[NOCRYPTO] */
+2:	/* pass 1 special stuff when !CvmCtl[NOCRYPTO] */
 	dmfc2	t3, 0x0040
 	dmfc2	t0, 0x0041
 	dmfc2	t1, 0x0042
@@ -269,7 +269,7 @@
 	sd	t3, OCTEON_CP2_HSH_IVW+8(a0)
 	sd	t0, OCTEON_CP2_HSH_IVW+16(a0)
 
-3:      /* pass 1 or CvmCtl[NOCRYPTO] set */
+3:	/* pass 1 or CvmCtl[NOCRYPTO] set */
 	jr	ra
 	END(octeon_cop2_save)
 
@@ -280,19 +280,19 @@
 	.set push
 	.set noreorder
 	LEAF(octeon_cop2_restore)
-        /* First cache line was prefetched before the call */
-        pref    4,  128(a0)
+	/* First cache line was prefetched before the call */
+	pref	4,  128(a0)
 	dmfc0	t9, $9,7	/* CvmCtl register. */
 
-        pref    4,  256(a0)
+	pref	4,  256(a0)
 	ld	t0, OCTEON_CP2_CRC_IV(a0)
-        pref    4,  384(a0)
+	pref	4,  384(a0)
 	ld	t1, OCTEON_CP2_CRC_LENGTH(a0)
 	ld	t2, OCTEON_CP2_CRC_POLY(a0)
 
 	/* Restore the COP2 CRC state */
 	dmtc2	t0, 0x0201
-	dmtc2 	t1, 0x1202
+	dmtc2	t1, 0x1202
 	bbit1	t9, 28, 2f	/* Skip LLM if CvmCtl[NODFA_CP2] is set */
 	 dmtc2	t2, 0x4200
 
@@ -310,19 +310,19 @@
 	ld	t0, OCTEON_CP2_3DES_IV(a0)
 	ld	t1, OCTEON_CP2_3DES_KEY(a0)
 	ld	t2, OCTEON_CP2_3DES_KEY+8(a0)
-	dmtc2 	t0, 0x0084
+	dmtc2	t0, 0x0084
 	ld	t0, OCTEON_CP2_3DES_KEY+16(a0)
-	dmtc2 	t1, 0x0080
+	dmtc2	t1, 0x0080
 	ld	t1, OCTEON_CP2_3DES_RESULT(a0)
-	dmtc2 	t2, 0x0081
+	dmtc2	t2, 0x0081
 	ld	t2, OCTEON_CP2_AES_INP0(a0) /* only really needed for pass 1 */
 	dmtc2	t0, 0x0082
 	ld	t0, OCTEON_CP2_AES_IV(a0)
-	dmtc2 	t1, 0x0098
+	dmtc2	t1, 0x0098
 	ld	t1, OCTEON_CP2_AES_IV+8(a0)
-	dmtc2 	t2, 0x010A                  /* only really needed for pass 1 */
+	dmtc2	t2, 0x010A		    /* only really needed for pass 1 */
 	ld	t2, OCTEON_CP2_AES_KEY(a0)
-	dmtc2 	t0, 0x0102
+	dmtc2	t0, 0x0102
 	ld	t0, OCTEON_CP2_AES_KEY+8(a0)
 	dmtc2	t1, 0x0103
 	ld	t1, OCTEON_CP2_AES_KEY+16(a0)
@@ -334,14 +334,14 @@
 	ld	t1, OCTEON_CP2_AES_RESULT(a0)
 	dmtc2	t2, 0x0107
 	ld	t2, OCTEON_CP2_AES_RESULT+8(a0)
-	mfc0	t3, $15,0 	/* Get the processor ID register */
+	mfc0	t3, $15,0	/* Get the processor ID register */
 	dmtc2	t0, 0x0110
 	li	t0, 0x000d0000	/* This is the processor ID of Octeon Pass1 */
 	dmtc2	t1, 0x0100
 	bne	t0, t3, 3f	/* Skip the next stuff for non-pass1 */
 	 dmtc2	t2, 0x0101
 
-        /* this code is specific for pass 1 */
+	/* this code is specific for pass 1 */
 	ld	t0, OCTEON_CP2_HSH_DATW(a0)
 	ld	t1, OCTEON_CP2_HSH_DATW+8(a0)
 	ld	t2, OCTEON_CP2_HSH_DATW+16(a0)
@@ -361,10 +361,10 @@
 	ld	t0, OCTEON_CP2_HSH_IVW+16(a0)
 	dmtc2	t1, 0x0048
 	dmtc2	t2, 0x0049
-        b done_restore   /* unconditional branch */
+	b done_restore	 /* unconditional branch */
 	 dmtc2	t0, 0x004A
 
-3:      /* this is post-pass1 code */
+3:	/* this is post-pass1 code */
 	ld	t2, OCTEON_CP2_HSH_DATW(a0)
 	ld	t0, OCTEON_CP2_HSH_DATW+8(a0)
 	ld	t1, OCTEON_CP2_HSH_DATW+16(a0)
@@ -433,7 +433,7 @@
  * sp is assumed to point to a struct pt_regs
  *
  * NOTE: This is called in SAVE_SOME in stackframe.h. It can only
- *       safely modify k0 and k1.
+ *	 safely modify k0 and k1.
  */
 	.align	7
 	.set push
@@ -446,14 +446,14 @@
 	/* Save the multiplier state */
 	v3mulu	k0, $0, $0
 	v3mulu	k1, $0, $0
-	sd	k0, PT_MTP(sp)        /* PT_MTP    has P0 */
+	sd	k0, PT_MTP(sp)	      /* PT_MTP	   has P0 */
 	v3mulu	k0, $0, $0
 	sd	k1, PT_MTP+8(sp)      /* PT_MTP+8  has P1 */
 	ori	k1, $0, 1
 	v3mulu	k1, k1, $0
 	sd	k0, PT_MTP+16(sp)     /* PT_MTP+16 has P2 */
 	v3mulu	k0, $0, $0
-	sd	k1, PT_MPL(sp)        /* PT_MPL    has MPL0 */
+	sd	k1, PT_MPL(sp)	      /* PT_MPL	   has MPL0 */
 	v3mulu	k1, $0, $0
 	sd	k0, PT_MPL+8(sp)      /* PT_MPL+8  has MPL1 */
 	jr	ra
@@ -475,19 +475,19 @@
 	.set noreorder
 	LEAF(octeon_mult_restore)
 	dmfc0	k1, $9,7		/* CvmCtl register. */
-	ld	v0, PT_MPL(sp)        	/* MPL0 */
-	ld	v1, PT_MPL+8(sp)      	/* MPL1 */
-	ld	k0, PT_MPL+16(sp)     	/* MPL2 */
+	ld	v0, PT_MPL(sp)		/* MPL0 */
+	ld	v1, PT_MPL+8(sp)	/* MPL1 */
+	ld	k0, PT_MPL+16(sp)	/* MPL2 */
 	bbit1	k1, 27, 1f		/* Skip CvmCtl[NOMUL] */
 	/* Normally falls through, so no time wasted here */
 	nop
 
 	/* Restore the multiplier state */
-	ld	k1, PT_MTP+16(sp)     	/* P2 */
+	ld	k1, PT_MTP+16(sp)	/* P2 */
 	MTM0	v0			/* MPL0 */
 	ld	v0, PT_MTP+8(sp)	/* P1 */
 	MTM1	v1			/* MPL1 */
-	ld	v1, PT_MTP(sp)   	/* P0 */
+	ld	v1, PT_MTP(sp)		/* P0 */
 	MTM2	k0			/* MPL2 */
 	MTP2	k1			/* P2 */
 	MTP1	v0			/* P1 */
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index d9c81c5..45f1ffc 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -103,13 +103,13 @@
 
 #define M_CONFIG1_PC	(1 << 4)
 
-#define M_PERFCTL_EXL			(1      <<  0)
-#define M_PERFCTL_KERNEL		(1      <<  1)
-#define M_PERFCTL_SUPERVISOR		(1      <<  2)
-#define M_PERFCTL_USER			(1      <<  3)
-#define M_PERFCTL_INTERRUPT_ENABLE	(1      <<  4)
+#define M_PERFCTL_EXL			(1	<<  0)
+#define M_PERFCTL_KERNEL		(1	<<  1)
+#define M_PERFCTL_SUPERVISOR		(1	<<  2)
+#define M_PERFCTL_USER			(1	<<  3)
+#define M_PERFCTL_INTERRUPT_ENABLE	(1	<<  4)
 #define M_PERFCTL_EVENT(event)		(((event) & 0x3ff)  << 5)
-#define M_PERFCTL_VPEID(vpe)		((vpe)    << 16)
+#define M_PERFCTL_VPEID(vpe)		((vpe)	  << 16)
 
 #ifdef CONFIG_CPU_BMIPS5000
 #define M_PERFCTL_MT_EN(filter)		0
@@ -117,13 +117,13 @@
 #define M_PERFCTL_MT_EN(filter)		((filter) << 20)
 #endif /* CONFIG_CPU_BMIPS5000 */
 
-#define    M_TC_EN_ALL			M_PERFCTL_MT_EN(0)
-#define    M_TC_EN_VPE			M_PERFCTL_MT_EN(1)
-#define    M_TC_EN_TC			M_PERFCTL_MT_EN(2)
-#define M_PERFCTL_TCID(tcid)		((tcid)   << 22)
-#define M_PERFCTL_WIDE			(1      << 30)
-#define M_PERFCTL_MORE			(1      << 31)
-#define M_PERFCTL_TC			(1      << 30)
+#define	   M_TC_EN_ALL			M_PERFCTL_MT_EN(0)
+#define	   M_TC_EN_VPE			M_PERFCTL_MT_EN(1)
+#define	   M_TC_EN_TC			M_PERFCTL_MT_EN(2)
+#define M_PERFCTL_TCID(tcid)		((tcid)	  << 22)
+#define M_PERFCTL_WIDE			(1	<< 30)
+#define M_PERFCTL_MORE			(1	<< 31)
+#define M_PERFCTL_TC			(1	<< 30)
 
 #define M_PERFCTL_COUNT_EVENT_WHENEVER	(M_PERFCTL_EXL |		\
 					M_PERFCTL_KERNEL |		\
@@ -827,7 +827,7 @@
 	[PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL },
 	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x03, CNTR_ALL },
 	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x2b, CNTR_ALL },
-	[PERF_COUNT_HW_CACHE_MISSES] = { 0x2e, CNTR_ALL  },
+	[PERF_COUNT_HW_CACHE_MISSES] = { 0x2e, CNTR_ALL	 },
 	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x08, CNTR_ALL },
 	[PERF_COUNT_HW_BRANCH_MISSES] = { 0x09, CNTR_ALL },
 	[PERF_COUNT_HW_BUS_CYCLES] = { 0x25, CNTR_ALL },
@@ -1371,7 +1371,7 @@
 	 (b) == 25 || (b) == 39 || (r) == 44 || (r) == 174 ||		\
 	 (r) == 176 || ((b) >= 50 && (b) <= 55) ||			\
 	 ((b) >= 64 && (b) <= 67))
-#define IS_RANGE_V_34K_EVENT(r)	((r) == 47)
+#define IS_RANGE_V_34K_EVENT(r) ((r) == 47)
 #endif
 
 /* 74K */
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 07dff54..135c4aa 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -1,7 +1,7 @@
 /*
  *  Copyright (C) 1995, 1996, 2001  Ralf Baechle
  *  Copyright (C) 2001, 2004  MIPS Technologies, Inc.
- *  Copyright (C) 2004  Maciej W. Rozycki
+ *  Copyright (C) 2004	Maciej W. Rozycki
  */
 #include <linux/delay.h>
 #include <linux/kernel.h>
@@ -64,6 +64,28 @@
 				cpu_data[n].watch_reg_masks[i]);
 		seq_printf(m, "]\n");
 	}
+	if (cpu_has_mips_r) {
+		seq_printf(m, "isa\t\t\t:");
+		if (cpu_has_mips_1)
+			seq_printf(m, "%s", "mips1");
+		if (cpu_has_mips_2)
+			seq_printf(m, "%s", " mips2");
+		if (cpu_has_mips_3)
+			seq_printf(m, "%s", " mips3");
+		if (cpu_has_mips_4)
+			seq_printf(m, "%s", " mips4");
+		if (cpu_has_mips_5)
+			seq_printf(m, "%s", " mips5");
+		if (cpu_has_mips32r1)
+			seq_printf(m, "%s", " mips32r1");
+		if (cpu_has_mips32r2)
+			seq_printf(m, "%s", " mips32r2");
+		if (cpu_has_mips64r1)
+			seq_printf(m, "%s", " mips64r1");
+		if (cpu_has_mips64r2)
+			seq_printf(m, "%s", " mips64r2");
+		seq_printf(m, "\n");
+	}
 
 	seq_printf(m, "ASEs implemented\t:");
 	if (cpu_has_mips16)	seq_printf(m, "%s", " mips16");
@@ -73,6 +95,8 @@
 	if (cpu_has_dsp)	seq_printf(m, "%s", " dsp");
 	if (cpu_has_dsp2)	seq_printf(m, "%s", " dsp2");
 	if (cpu_has_mipsmt)	seq_printf(m, "%s", " mt");
+	if (cpu_has_mmips)	seq_printf(m, "%s", " micromips");
+	if (cpu_has_vz)		seq_printf(m, "%s", " vz");
 	seq_printf(m, "\n");
 
 	seq_printf(m, "shadow register sets\t: %d\n",
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index a33d2ef8..3be4405 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -154,8 +154,8 @@
 		return 0;
 	}
 	*childregs = *regs;
-	childregs->regs[7] = 0;	/* Clear error flag */
-	childregs->regs[2] = 0;	/* Child gets zero as return value */
+	childregs->regs[7] = 0; /* Clear error flag */
+	childregs->regs[2] = 0; /* Child gets zero as return value */
 	if (usp)
 		childregs->regs[29] = usp;
 	ti->addr_limit = USER_DS;
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 4812c6d..9c6299c 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -50,7 +50,7 @@
 }
 
 /*
- * Read a general register set.  We always use the 64-bit format, even
+ * Read a general register set.	 We always use the 64-bit format, even
  * for 32-bit kernels and for 32-bit processes on a 64-bit kernel.
  * Registers are sign extended to fill the available space.
  */
@@ -326,7 +326,7 @@
 		case FPC_CSR:
 			tmp = child->thread.fpu.fcr31;
 			break;
-		case FPC_EIR: {	/* implementation / version register */
+		case FPC_EIR: { /* implementation / version register */
 			unsigned int flags;
 #ifdef CONFIG_MIPS_MT_SMTC
 			unsigned long irqflags;
@@ -520,10 +520,10 @@
 {
 	int arch = EM_MIPS;
 #ifdef CONFIG_64BIT
-	arch |=  __AUDIT_ARCH_64BIT;
+	arch |=	 __AUDIT_ARCH_64BIT;
 #endif
 #if defined(__LITTLE_ENDIAN)
-	arch |=  __AUDIT_ARCH_LE;
+	arch |=	 __AUDIT_ARCH_LE;
 #endif
 	return arch;
 }
@@ -546,7 +546,7 @@
 	/* The 0x80 provides a way for the tracing parent to distinguish
 	   between a syscall stop and SIGTRAP delivery */
 	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
-	                         0x80 : 0));
+				 0x80 : 0));
 
 	/*
 	 * this isn't the same as continuing with a signal, but it will do
@@ -581,7 +581,7 @@
 	/* The 0x80 provides a way for the tracing parent to distinguish
 	   between a syscall stop and SIGTRAP delivery */
 	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
-	                         0x80 : 0));
+				 0x80 : 0));
 
 	/*
 	 * this isn't the same as continuing with a signal, but it will do
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index a3b0178..9486055 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -124,7 +124,7 @@
 		case FPC_CSR:
 			tmp = child->thread.fpu.fcr31;
 			break;
-		case FPC_EIR: {	/* implementation / version register */
+		case FPC_EIR: { /* implementation / version register */
 			unsigned int flags;
 #ifdef CONFIG_MIPS_MT_SMTC
 			unsigned int irqflags;
diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S
index 61c8a0f..f31063d 100644
--- a/arch/mips/kernel/r2300_fpu.S
+++ b/arch/mips/kernel/r2300_fpu.S
@@ -30,38 +30,38 @@
 LEAF(_save_fp_context)
 	li	v0, 0					# assume success
 	cfc1	t1,fcr31
-	EX(swc1	$f0,(SC_FPREGS+0)(a0))
-	EX(swc1	$f1,(SC_FPREGS+8)(a0))
-	EX(swc1	$f2,(SC_FPREGS+16)(a0))
-	EX(swc1	$f3,(SC_FPREGS+24)(a0))
-	EX(swc1	$f4,(SC_FPREGS+32)(a0))
-	EX(swc1	$f5,(SC_FPREGS+40)(a0))
-	EX(swc1	$f6,(SC_FPREGS+48)(a0))
-	EX(swc1	$f7,(SC_FPREGS+56)(a0))
-	EX(swc1	$f8,(SC_FPREGS+64)(a0))
-	EX(swc1	$f9,(SC_FPREGS+72)(a0))
-	EX(swc1	$f10,(SC_FPREGS+80)(a0))
-	EX(swc1	$f11,(SC_FPREGS+88)(a0))
-	EX(swc1	$f12,(SC_FPREGS+96)(a0))
-	EX(swc1	$f13,(SC_FPREGS+104)(a0))
-	EX(swc1	$f14,(SC_FPREGS+112)(a0))
-	EX(swc1	$f15,(SC_FPREGS+120)(a0))
-	EX(swc1	$f16,(SC_FPREGS+128)(a0))
-	EX(swc1	$f17,(SC_FPREGS+136)(a0))
-	EX(swc1	$f18,(SC_FPREGS+144)(a0))
-	EX(swc1	$f19,(SC_FPREGS+152)(a0))
-	EX(swc1	$f20,(SC_FPREGS+160)(a0))
-	EX(swc1	$f21,(SC_FPREGS+168)(a0))
-	EX(swc1	$f22,(SC_FPREGS+176)(a0))
-	EX(swc1	$f23,(SC_FPREGS+184)(a0))
-	EX(swc1	$f24,(SC_FPREGS+192)(a0))
-	EX(swc1	$f25,(SC_FPREGS+200)(a0))
-	EX(swc1	$f26,(SC_FPREGS+208)(a0))
-	EX(swc1	$f27,(SC_FPREGS+216)(a0))
-	EX(swc1	$f28,(SC_FPREGS+224)(a0))
-	EX(swc1	$f29,(SC_FPREGS+232)(a0))
-	EX(swc1	$f30,(SC_FPREGS+240)(a0))
-	EX(swc1	$f31,(SC_FPREGS+248)(a0))
+	EX(swc1 $f0,(SC_FPREGS+0)(a0))
+	EX(swc1 $f1,(SC_FPREGS+8)(a0))
+	EX(swc1 $f2,(SC_FPREGS+16)(a0))
+	EX(swc1 $f3,(SC_FPREGS+24)(a0))
+	EX(swc1 $f4,(SC_FPREGS+32)(a0))
+	EX(swc1 $f5,(SC_FPREGS+40)(a0))
+	EX(swc1 $f6,(SC_FPREGS+48)(a0))
+	EX(swc1 $f7,(SC_FPREGS+56)(a0))
+	EX(swc1 $f8,(SC_FPREGS+64)(a0))
+	EX(swc1 $f9,(SC_FPREGS+72)(a0))
+	EX(swc1 $f10,(SC_FPREGS+80)(a0))
+	EX(swc1 $f11,(SC_FPREGS+88)(a0))
+	EX(swc1 $f12,(SC_FPREGS+96)(a0))
+	EX(swc1 $f13,(SC_FPREGS+104)(a0))
+	EX(swc1 $f14,(SC_FPREGS+112)(a0))
+	EX(swc1 $f15,(SC_FPREGS+120)(a0))
+	EX(swc1 $f16,(SC_FPREGS+128)(a0))
+	EX(swc1 $f17,(SC_FPREGS+136)(a0))
+	EX(swc1 $f18,(SC_FPREGS+144)(a0))
+	EX(swc1 $f19,(SC_FPREGS+152)(a0))
+	EX(swc1 $f20,(SC_FPREGS+160)(a0))
+	EX(swc1 $f21,(SC_FPREGS+168)(a0))
+	EX(swc1 $f22,(SC_FPREGS+176)(a0))
+	EX(swc1 $f23,(SC_FPREGS+184)(a0))
+	EX(swc1 $f24,(SC_FPREGS+192)(a0))
+	EX(swc1 $f25,(SC_FPREGS+200)(a0))
+	EX(swc1 $f26,(SC_FPREGS+208)(a0))
+	EX(swc1 $f27,(SC_FPREGS+216)(a0))
+	EX(swc1 $f28,(SC_FPREGS+224)(a0))
+	EX(swc1 $f29,(SC_FPREGS+232)(a0))
+	EX(swc1 $f30,(SC_FPREGS+240)(a0))
+	EX(swc1 $f31,(SC_FPREGS+248)(a0))
 	EX(sw	t1,(SC_FPC_CSR)(a0))
 	cfc1	t0,$0				# implementation/version
 	jr	ra
@@ -82,38 +82,38 @@
 LEAF(_restore_fp_context)
 	li	v0, 0					# assume success
 	EX(lw t0,(SC_FPC_CSR)(a0))
-	EX(lwc1	$f0,(SC_FPREGS+0)(a0))
-	EX(lwc1	$f1,(SC_FPREGS+8)(a0))
-	EX(lwc1	$f2,(SC_FPREGS+16)(a0))
-	EX(lwc1	$f3,(SC_FPREGS+24)(a0))
-	EX(lwc1	$f4,(SC_FPREGS+32)(a0))
-	EX(lwc1	$f5,(SC_FPREGS+40)(a0))
-	EX(lwc1	$f6,(SC_FPREGS+48)(a0))
-	EX(lwc1	$f7,(SC_FPREGS+56)(a0))
-	EX(lwc1	$f8,(SC_FPREGS+64)(a0))
-	EX(lwc1	$f9,(SC_FPREGS+72)(a0))
-	EX(lwc1	$f10,(SC_FPREGS+80)(a0))
-	EX(lwc1	$f11,(SC_FPREGS+88)(a0))
-	EX(lwc1	$f12,(SC_FPREGS+96)(a0))
-	EX(lwc1	$f13,(SC_FPREGS+104)(a0))
-	EX(lwc1	$f14,(SC_FPREGS+112)(a0))
-	EX(lwc1	$f15,(SC_FPREGS+120)(a0))
-	EX(lwc1	$f16,(SC_FPREGS+128)(a0))
-	EX(lwc1	$f17,(SC_FPREGS+136)(a0))
-	EX(lwc1	$f18,(SC_FPREGS+144)(a0))
-	EX(lwc1	$f19,(SC_FPREGS+152)(a0))
-	EX(lwc1	$f20,(SC_FPREGS+160)(a0))
-	EX(lwc1	$f21,(SC_FPREGS+168)(a0))
-	EX(lwc1	$f22,(SC_FPREGS+176)(a0))
-	EX(lwc1	$f23,(SC_FPREGS+184)(a0))
-	EX(lwc1	$f24,(SC_FPREGS+192)(a0))
-	EX(lwc1	$f25,(SC_FPREGS+200)(a0))
-	EX(lwc1	$f26,(SC_FPREGS+208)(a0))
-	EX(lwc1	$f27,(SC_FPREGS+216)(a0))
-	EX(lwc1	$f28,(SC_FPREGS+224)(a0))
-	EX(lwc1	$f29,(SC_FPREGS+232)(a0))
-	EX(lwc1	$f30,(SC_FPREGS+240)(a0))
-	EX(lwc1	$f31,(SC_FPREGS+248)(a0))
+	EX(lwc1 $f0,(SC_FPREGS+0)(a0))
+	EX(lwc1 $f1,(SC_FPREGS+8)(a0))
+	EX(lwc1 $f2,(SC_FPREGS+16)(a0))
+	EX(lwc1 $f3,(SC_FPREGS+24)(a0))
+	EX(lwc1 $f4,(SC_FPREGS+32)(a0))
+	EX(lwc1 $f5,(SC_FPREGS+40)(a0))
+	EX(lwc1 $f6,(SC_FPREGS+48)(a0))
+	EX(lwc1 $f7,(SC_FPREGS+56)(a0))
+	EX(lwc1 $f8,(SC_FPREGS+64)(a0))
+	EX(lwc1 $f9,(SC_FPREGS+72)(a0))
+	EX(lwc1 $f10,(SC_FPREGS+80)(a0))
+	EX(lwc1 $f11,(SC_FPREGS+88)(a0))
+	EX(lwc1 $f12,(SC_FPREGS+96)(a0))
+	EX(lwc1 $f13,(SC_FPREGS+104)(a0))
+	EX(lwc1 $f14,(SC_FPREGS+112)(a0))
+	EX(lwc1 $f15,(SC_FPREGS+120)(a0))
+	EX(lwc1 $f16,(SC_FPREGS+128)(a0))
+	EX(lwc1 $f17,(SC_FPREGS+136)(a0))
+	EX(lwc1 $f18,(SC_FPREGS+144)(a0))
+	EX(lwc1 $f19,(SC_FPREGS+152)(a0))
+	EX(lwc1 $f20,(SC_FPREGS+160)(a0))
+	EX(lwc1 $f21,(SC_FPREGS+168)(a0))
+	EX(lwc1 $f22,(SC_FPREGS+176)(a0))
+	EX(lwc1 $f23,(SC_FPREGS+184)(a0))
+	EX(lwc1 $f24,(SC_FPREGS+192)(a0))
+	EX(lwc1 $f25,(SC_FPREGS+200)(a0))
+	EX(lwc1 $f26,(SC_FPREGS+208)(a0))
+	EX(lwc1 $f27,(SC_FPREGS+216)(a0))
+	EX(lwc1 $f28,(SC_FPREGS+224)(a0))
+	EX(lwc1 $f29,(SC_FPREGS+232)(a0))
+	EX(lwc1 $f30,(SC_FPREGS+240)(a0))
+	EX(lwc1 $f31,(SC_FPREGS+248)(a0))
 	jr	ra
 	 ctc1	t0,fcr31
 	END(_restore_fp_context)
diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S
index 8d32d5a..5266c6e 100644
--- a/arch/mips/kernel/r2300_switch.S
+++ b/arch/mips/kernel/r2300_switch.S
@@ -42,7 +42,7 @@
 
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
- *                     struct thread_info *next_ti, int usedfpu)
+ *		       struct thread_info *next_ti, int usedfpu)
  */
 LEAF(resume)
 	mfc0	t1, CP0_STATUS
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index 8decdfa..5e51219 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -40,7 +40,7 @@
 
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
- *                     struct thread_info *next_ti, int usedfpu)
+ *		       struct thread_info *next_ti, int usedfpu)
  */
 	.align	5
 	LEAF(resume)
@@ -53,7 +53,7 @@
 	 * check if we need to save FPU registers
 	 */
 
-	beqz    a3, 1f
+	beqz	a3, 1f
 
 	PTR_L	t3, TASK_THREAD_INFO(a0)
 	/*
diff --git a/arch/mips/kernel/relocate_kernel.S b/arch/mips/kernel/relocate_kernel.S
index 804ebb2..43d2d78 100644
--- a/arch/mips/kernel/relocate_kernel.S
+++ b/arch/mips/kernel/relocate_kernel.S
@@ -33,7 +33,7 @@
 	b		process_entry
 
 1:
-	/* indirection page, update s0  */
+	/* indirection page, update s0	*/
 	and		s3, s2, 0x2
 	beq		s3, zero, 1f
 	and		s0, s2, ~0x2
@@ -69,7 +69,7 @@
 	   of kexec_flag.  */
 
 	bal		1f
- 1: 	move		t1,ra;
+ 1:	move		t1,ra;
 	PTR_LA		t2,1b
 	PTR_LA		t0,kexec_flag
 	PTR_SUB		t0,t0,t2;
@@ -158,10 +158,10 @@
  */
 secondary_kexec_args:
 	EXPORT(secondary_kexec_args)
-s_arg0:	PTR		0x0
-s_arg1:	PTR		0x0
-s_arg2:	PTR		0x0
-s_arg3:	PTR		0x0
+s_arg0: PTR		0x0
+s_arg1: PTR		0x0
+s_arg2: PTR		0x0
+s_arg3: PTR		0x0
 	.size	secondary_kexec_args,PTRSIZE*4
 kexec_flag:
 	LONG		0x1
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 88f7b50..93c070b 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -252,12 +252,12 @@
 
 unsigned int rtlx_read_poll(int index, int can_sleep)
 {
- 	struct rtlx_channel *chan;
+	struct rtlx_channel *chan;
 
- 	if (rtlx == NULL)
- 		return 0;
+	if (rtlx == NULL)
+		return 0;
 
- 	chan = &rtlx->channel[index];
+	chan = &rtlx->channel[index];
 
 	/* data available to read? */
 	if (chan->lx_read == chan->lx_write) {
@@ -446,8 +446,8 @@
 			return -EAGAIN;
 
 		__wait_event_interruptible(channel_wqs[minor].rt_queue,
-		                           rtlx_write_poll(minor),
-		                           ret);
+					   rtlx_write_poll(minor),
+					   ret);
 		if (ret)
 			return ret;
 	}
@@ -457,11 +457,11 @@
 
 static const struct file_operations rtlx_fops = {
 	.owner =   THIS_MODULE,
-	.open =    file_open,
+	.open =	   file_open,
 	.release = file_release,
 	.write =   file_write,
-	.read =    file_read,
-	.poll =    file_poll,
+	.read =	   file_read,
+	.poll =	   file_poll,
 	.llseek =  noop_llseek,
 };
 
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 80ff942..9ea2964 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -24,7 +24,7 @@
 /* Highest syscall used of any syscall flavour */
 #define MAX_SYSCALL_NO	__NR_O32_Linux + __NR_O32_Linux_syscalls
 
-	.align  5
+	.align	5
 NESTED(handle_sys, PT_SIZE, sp)
 	.set	noat
 	SAVE_SOME
@@ -54,7 +54,7 @@
 	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	li	t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
 	and	t0, t1
-	bnez	t0, syscall_trace_entry	# -> yes
+	bnez	t0, syscall_trace_entry # -> yes
 
 	jalr	t2			# Do The Real Thing (TM)
 
@@ -126,8 +126,8 @@
 	la	t1, 5f			# load up to 3 arguments
 	subu	t1, t3
 1:	lw	t5, 16(t0)		# argument #5 from usp
-	.set    push
-	.set    noreorder
+	.set	push
+	.set	noreorder
 	.set	nomacro
 	jr	t1
 	 addiu	t1, 6f - 5f
@@ -205,7 +205,7 @@
 	jr	t2
 	/* Unreached */
 
-einval:	li	v0, -ENOSYS
+einval: li	v0, -ENOSYS
 	jr	ra
 	END(sys_syscall)
 
@@ -354,7 +354,7 @@
 	sys	sys_ni_syscall		0	/* was create_module */
 	sys	sys_init_module		5
 	sys	sys_delete_module	1
-	sys	sys_ni_syscall		0	/* 4130	was get_kernel_syms */
+	sys	sys_ni_syscall		0	/* 4130 was get_kernel_syms */
 	sys	sys_quotactl		4
 	sys	sys_getpgid		1
 	sys	sys_fchdir		1
@@ -589,7 +589,7 @@
 	/* We pre-compute the number of _instruction_ bytes needed to
 	   load or store the arguments 6-8. Negative values are ignored. */
 
-	.macro  sys function, nargs
+	.macro	sys function, nargs
 	PTR	\function
 	LONG	(\nargs << 2) - (5 << 2)
 	.endm
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 9444ad9..36cfd40 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -25,7 +25,7 @@
 #define handle_sys64 handle_sys
 #endif
 
-	.align  5
+	.align	5
 NESTED(handle_sys64, PT_SIZE, sp)
 #if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32)
 	/*
@@ -40,7 +40,7 @@
 #endif
 
 	dsubu	t0, v0, __NR_64_Linux	# check syscall number
-	sltiu	t0, t0,	__NR_64_Linux_syscalls + 1
+	sltiu	t0, t0, __NR_64_Linux_syscalls + 1
 #if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32)
 	ld	t1, PT_EPC(sp)		# skip syscall on return
 	daddiu	t1, 4			# skip to next instruction
@@ -290,7 +290,7 @@
 	PTR	sys_quotactl
 	PTR	sys_ni_syscall			/* was nfsservctl */
 	PTR	sys_ni_syscall			/* res. for getpmsg */
-	PTR	sys_ni_syscall			/* 5175  for putpmsg */
+	PTR	sys_ni_syscall			/* 5175	 for putpmsg */
 	PTR	sys_ni_syscall			/* res. for afs_syscall */
 	PTR	sys_ni_syscall			/* res. for security */
 	PTR	sys_gettid
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 3b18a8e..693d60b 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -22,7 +22,7 @@
 #define handle_sysn32 handle_sys
 #endif
 
-	.align  5
+	.align	5
 NESTED(handle_sysn32, PT_SIZE, sp)
 #ifndef CONFIG_MIPS32_O32
 	.set	noat
@@ -33,7 +33,7 @@
 #endif
 
 	dsubu	t0, v0, __NR_N32_Linux	# check syscall number
-	sltiu	t0, t0,	__NR_N32_Linux_syscalls + 1
+	sltiu	t0, t0, __NR_N32_Linux_syscalls + 1
 
 #ifndef CONFIG_MIPS32_O32
 	ld	t1, PT_EPC(sp)		# skip syscall on return
@@ -279,7 +279,7 @@
 	PTR	sys_quotactl
 	PTR	sys_ni_syscall			/* was nfsservctl */
 	PTR	sys_ni_syscall			/* res. for getpmsg */
-	PTR	sys_ni_syscall			/* 6175  for putpmsg */
+	PTR	sys_ni_syscall			/* 6175	 for putpmsg */
 	PTR	sys_ni_syscall			/* res. for afs_syscall */
 	PTR	sys_ni_syscall			/* res. for security */
 	PTR	sys_gettid
@@ -402,8 +402,8 @@
 	PTR	compat_sys_rt_tgsigqueueinfo	/* 6295 */
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
-	PTR     compat_sys_recvmmsg
-	PTR     sys_getdents64
+	PTR	compat_sys_recvmmsg
+	PTR	sys_getdents64
 	PTR	sys_fanotify_init		/* 6300 */
 	PTR	sys_fanotify_mark
 	PTR	sys_prlimit64
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 063cd0d..402d746 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -10,7 +10,7 @@
  *
  * Hairy, the userspace application uses a different argument passing
  * convention than the kernel, so we have to translate things from o32
- * to ABI64 calling convention.  64-bit syscalls are also processed
+ * to ABI64 calling convention.	 64-bit syscalls are also processed
  * here for now.
  */
 #include <linux/errno.h>
@@ -24,7 +24,7 @@
 #include <asm/unistd.h>
 #include <asm/sysmips.h>
 
-	.align  5
+	.align	5
 NESTED(handle_sys, PT_SIZE, sp)
 	.set	noat
 	SAVE_SOME
@@ -185,7 +185,7 @@
 	jr	t2
 	/* Unreached */
 
-einval:	li	v0, -ENOSYS
+einval: li	v0, -ENOSYS
 	jr	ra
 	END(sys32_syscall)
 
@@ -329,7 +329,7 @@
 	PTR	sys_bdflush
 	PTR	sys_sysfs			/* 4135 */
 	PTR	sys_32_personality
-	PTR	sys_ni_syscall	 		/* for afs_syscall */
+	PTR	sys_ni_syscall			/* for afs_syscall */
 	PTR	sys_setfsuid
 	PTR	sys_setfsgid
 	PTR	sys_32_llseek			/* 4140 */
@@ -352,12 +352,12 @@
 	PTR	sys_munlockall
 	PTR	sys_sched_setparam
 	PTR	sys_sched_getparam
-	PTR	sys_sched_setscheduler 		/* 4160 */
+	PTR	sys_sched_setscheduler		/* 4160 */
 	PTR	sys_sched_getscheduler
 	PTR	sys_sched_yield
 	PTR	sys_sched_get_priority_max
 	PTR	sys_sched_get_priority_min
-	PTR	compat_sys_sched_rr_get_interval 	/* 4165 */
+	PTR	compat_sys_sched_rr_get_interval	/* 4165 */
 	PTR	compat_sys_nanosleep
 	PTR	sys_mremap
 	PTR	sys_accept
@@ -387,7 +387,7 @@
 	PTR	sys_prctl
 	PTR	sys32_rt_sigreturn
 	PTR	compat_sys_rt_sigaction
-	PTR	compat_sys_rt_sigprocmask 	/* 4195 */
+	PTR	compat_sys_rt_sigprocmask	/* 4195 */
 	PTR	compat_sys_rt_sigpending
 	PTR	compat_sys_rt_sigtimedwait
 	PTR	compat_sys_rt_sigqueueinfo
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 8c41187..4c774d5 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -8,7 +8,7 @@
  * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03  Ralf Baechle
  * Copyright (C) 1996 Stoned Elipot
  * Copyright (C) 1999 Silicon Graphics, Inc.
- * Copyright (C) 2000, 2001, 2002, 2007  Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2007	 Maciej W. Rozycki
  */
 #include <linux/init.h>
 #include <linux/ioport.h>
@@ -449,7 +449,7 @@
  * At this stage the bootmem allocator is ready to use.
  *
  * NOTE: historically plat_mem_setup did the entire platform initialization.
- *       This was rather impractical because it meant plat_mem_setup had to
+ *	 This was rather impractical because it meant plat_mem_setup had to
  * get away without any kind of memory allocator.  To keep old code from
  * breaking plat_setup was just renamed to plat_setup and a second platform
  * initialization hook for anything else was introduced.
@@ -469,7 +469,7 @@
 	if (usermem == 0) {
 		boot_mem_map.nr_map = 0;
 		usermem = 1;
- 	}
+	}
 	start = 0;
 	size = memparse(p, &p);
 	if (*p == '@')
@@ -480,34 +480,75 @@
 }
 early_param("mem", early_parse_mem);
 
+#ifdef CONFIG_PROC_VMCORE
+unsigned long setup_elfcorehdr, setup_elfcorehdr_size;
+static int __init early_parse_elfcorehdr(char *p)
+{
+	int i;
+
+	setup_elfcorehdr = memparse(p, &p);
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		unsigned long start = boot_mem_map.map[i].addr;
+		unsigned long end = (boot_mem_map.map[i].addr +
+				     boot_mem_map.map[i].size);
+		if (setup_elfcorehdr >= start && setup_elfcorehdr < end) {
+			/*
+			 * Reserve from the elf core header to the end of
+			 * the memory segment, that should all be kdump
+			 * reserved memory.
+			 */
+			setup_elfcorehdr_size = end - setup_elfcorehdr;
+			break;
+		}
+	}
+	/*
+	 * If we don't find it in the memory map, then we shouldn't
+	 * have to worry about it, as the new kernel won't use it.
+	 */
+	return 0;
+}
+early_param("elfcorehdr", early_parse_elfcorehdr);
+#endif
+
+static void __init arch_mem_addpart(phys_t mem, phys_t end, int type)
+{
+	phys_t size;
+	int i;
+
+	size = end - mem;
+	if (!size)
+		return;
+
+	/* Make sure it is in the boot_mem_map */
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		if (mem >= boot_mem_map.map[i].addr &&
+		    mem < (boot_mem_map.map[i].addr +
+			   boot_mem_map.map[i].size))
+			return;
+	}
+	add_memory_region(mem, size, type);
+}
+
 static void __init arch_mem_init(char **cmdline_p)
 {
-	phys_t init_mem, init_end, init_size;
-
 	extern void plat_mem_setup(void);
 
 	/* call board setup routine */
 	plat_mem_setup();
 
-	init_mem = PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT;
-	init_end = PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT;
-	init_size = init_end - init_mem;
-	if (init_size) {
-		/* Make sure it is in the boot_mem_map */
-		int i, found;
-		found = 0;
-		for (i = 0; i < boot_mem_map.nr_map; i++) {
-			if (init_mem >= boot_mem_map.map[i].addr &&
-			    init_mem < (boot_mem_map.map[i].addr +
-					boot_mem_map.map[i].size)) {
-				found = 1;
-				break;
-			}
-		}
-		if (!found)
-			add_memory_region(init_mem, init_size,
-					  BOOT_MEM_INIT_RAM);
-	}
+	/*
+	 * Make sure all kernel memory is in the maps.  The "UP" and
+	 * "DOWN" are opposite for initdata since if it crosses over
+	 * into another memory section you don't want that to be
+	 * freed when the initdata is freed.
+	 */
+	arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
+			 PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
+			 BOOT_MEM_RAM);
+	arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
+			 PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
+			 BOOT_MEM_INIT_RAM);
 
 	pr_info("Determined physical RAM map:\n");
 	print_memory_map();
@@ -537,6 +578,14 @@
 	}
 
 	bootmem_init();
+#ifdef CONFIG_PROC_VMCORE
+	if (setup_elfcorehdr && setup_elfcorehdr_size) {
+		printk(KERN_INFO "kdump reserved memory at %lx-%lx\n",
+		       setup_elfcorehdr, setup_elfcorehdr_size);
+		reserve_bootmem(setup_elfcorehdr, setup_elfcorehdr_size,
+				BOOTMEM_DEFAULT);
+	}
+#endif
 #ifdef CONFIG_KEXEC
 	if (crashk_res.start != crashk_res.end)
 		reserve_bootmem(crashk_res.start,
@@ -571,7 +620,7 @@
 		return;
 
 	crashk_res.start = crash_base;
-	crashk_res.end   = crash_base + crash_size - 1;
+	crashk_res.end	 = crash_base + crash_size - 1;
 }
 
 static void __init request_crashkernel(struct resource *res)
@@ -585,7 +634,7 @@
 				crashk_res.start + 1) >> 20),
 			(unsigned long)(crashk_res.start  >> 20));
 }
-#else /* !defined(CONFIG_KEXEC)  */
+#else /* !defined(CONFIG_KEXEC)	 */
 static void __init mips_parse_crashkernel(void)
 {
 }
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 95b019d..b5e88fd 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -412,7 +412,7 @@
 #endif
 
 static int setup_rt_frame(void *sig_return, struct k_sigaction *ka,
-			  struct pt_regs *regs,	int signr, sigset_t *set,
+			  struct pt_regs *regs, int signr, sigset_t *set,
 			  siginfo_t *info)
 {
 	struct rt_sigframe __user *frame;
@@ -425,7 +425,7 @@
 	/* Create siginfo.  */
 	err |= copy_siginfo_to_user(&frame->rs_info, info);
 
-	/* Create the ucontext.  */
+	/* Create the ucontext.	 */
 	err |= __put_user(0, &frame->rs_uc.uc_flags);
 	err |= __put_user(NULL, &frame->rs_uc.uc_link);
 	err |= __save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]);
@@ -468,7 +468,7 @@
 	.setup_frame	= setup_frame,
 	.signal_return_offset = offsetof(struct mips_vdso, signal_trampoline),
 #endif
-	.setup_rt_frame	= setup_rt_frame,
+	.setup_rt_frame = setup_rt_frame,
 	.rt_signal_return_offset =
 		offsetof(struct mips_vdso, rt_signal_trampoline),
 	.restart	= __NR_restart_syscall
@@ -500,7 +500,7 @@
 			regs->cp0_epc -= 4;
 		}
 
-		regs->regs[0] = 0;		/* Don't deal with this again.  */
+		regs->regs[0] = 0;		/* Don't deal with this again.	*/
 	}
 
 	if (sig_uses_siginfo(ka))
@@ -524,7 +524,7 @@
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
+		/* Whee!  Actually deliver the signal.	*/
 		handle_signal(signr, &info, &ka, regs);
 		return;
 	}
@@ -545,7 +545,7 @@
 			regs->cp0_epc -= 4;
 			break;
 		}
-		regs->regs[0] = 0;	/* Don't deal with this again.  */
+		regs->regs[0] = 0;	/* Don't deal with this again.	*/
 	}
 
 	/*
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index ad7c2be..57de8b7 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -48,7 +48,7 @@
 /*
  * Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
  */
-#define __NR_O32_restart_syscall        4253
+#define __NR_O32_restart_syscall	4253
 
 /* 32-bit compatibility types */
 
@@ -56,11 +56,11 @@
 typedef void (*vfptr_t)(void);
 
 struct ucontext32 {
-	u32                 uc_flags;
-	s32                 uc_link;
+	u32		    uc_flags;
+	s32		    uc_link;
 	compat_stack_t      uc_stack;
 	struct sigcontext32 uc_mcontext;
-	compat_sigset_t     uc_sigmask;   /* mask last for extensibility */
+	compat_sigset_t	    uc_sigmask;	  /* mask last for extensibility */
 };
 
 struct sigframe32 {
@@ -302,7 +302,7 @@
 			return -EFAULT;
 		err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
 		err |= __put_user((u32)(u64)old_ka.sa.sa_handler,
-		                  &oact->sa_handler);
+				  &oact->sa_handler);
 		err |= __put_user(old_ka.sa.sa_mask.sig[0], oact->sa_mask.sig);
 		err |= __put_user(0, &oact->sa_mask.sig[1]);
 		err |= __put_user(0, &oact->sa_mask.sig[2]);
@@ -507,7 +507,7 @@
 	/* Convert (siginfo_t -> compat_siginfo_t) and copy to user. */
 	err |= copy_siginfo_to_user32(&frame->rs_info, info);
 
-	/* Create the ucontext.  */
+	/* Create the ucontext.	 */
 	err |= __put_user(0, &frame->rs_uc.uc_flags);
 	err |= __put_user(0, &frame->rs_uc.uc_link);
 	err |= __compat_save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]);
@@ -552,7 +552,7 @@
 	.setup_frame	= setup_frame_32,
 	.signal_return_offset =
 		offsetof(struct mips_vdso, o32_signal_trampoline),
-	.setup_rt_frame	= setup_rt_frame_32,
+	.setup_rt_frame = setup_rt_frame_32,
 	.rt_signal_return_offset =
 		offsetof(struct mips_vdso, o32_rt_signal_trampoline),
 	.restart	= __NR_O32_restart_syscall
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index 5f4ef2a..b2241bb 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -51,11 +51,11 @@
 extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
 
 struct ucontextn32 {
-	u32                 uc_flags;
-	s32                 uc_link;
+	u32		    uc_flags;
+	s32		    uc_link;
 	compat_stack_t      uc_stack;
 	struct sigcontext   uc_mcontext;
-	compat_sigset_t     uc_sigmask;   /* mask last for extensibility */
+	compat_sigset_t	    uc_sigmask;	  /* mask last for extensibility */
 };
 
 struct rt_sigframe_n32 {
@@ -115,7 +115,7 @@
 	/* Create siginfo.  */
 	err |= copy_siginfo_to_user32(&frame->rs_info, info);
 
-	/* Create the ucontext.  */
+	/* Create the ucontext.	 */
 	err |= __put_user(0, &frame->rs_uc.uc_flags);
 	err |= __put_user(0, &frame->rs_uc.uc_link);
 	err |= __compat_save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]);
@@ -154,7 +154,7 @@
 }
 
 struct mips_abi mips_abi_n32 = {
-	.setup_rt_frame	= setup_rt_frame_n32,
+	.setup_rt_frame = setup_rt_frame_n32,
 	.rt_signal_return_offset =
 		offsetof(struct mips_vdso, n32_rt_signal_trampoline),
 	.restart	= __NR_N32_restart_syscall
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index 06cd0c6..c2e5d74 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -172,7 +172,7 @@
 		if (amon_cpu_avail(i)) {
 			set_cpu_possible(i, true);
 			__cpu_number_map[i]	= ++ncpu;
-			__cpu_logical_map[ncpu]	= i;
+			__cpu_logical_map[ncpu] = i;
 		}
 	}
 
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 2defa2b..bfede06 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -71,7 +71,7 @@
 		/* Record this as available CPU */
 		set_cpu_possible(tc, true);
 		__cpu_number_map[tc]	= ++ncpu;
-		__cpu_logical_map[ncpu]	= tc;
+		__cpu_logical_map[ncpu] = tc;
 	}
 
 	/* Disable multi-threading with TC's */
@@ -215,7 +215,7 @@
 	write_tc_gpr_gp((unsigned long)gp);
 
 	flush_icache_range((unsigned long)gp,
-	                   (unsigned long)(gp + sizeof(struct thread_info)));
+			   (unsigned long)(gp + sizeof(struct thread_info)));
 
 	/* finally out of configuration and into chaos */
 	clear_c0_mvpcontrol(MVPCONTROL_VPC);
diff --git a/arch/mips/kernel/smtc-asm.S b/arch/mips/kernel/smtc-asm.S
index 20938a4..76016ac 100644
--- a/arch/mips/kernel/smtc-asm.S
+++ b/arch/mips/kernel/smtc-asm.S
@@ -65,7 +65,7 @@
 1:
 	/*
 	 * The IPI sender has put some information on the anticipated
-	 * kernel stack frame.  If we were in user mode, this will be
+	 * kernel stack frame.	If we were in user mode, this will be
 	 * built above the saved kernel SP.  If we were already in the
 	 * kernel, it will be built above the current CPU SP.
 	 *
diff --git a/arch/mips/kernel/smtc-proc.c b/arch/mips/kernel/smtc-proc.c
index 145771c..aee7c81 100644
--- a/arch/mips/kernel/smtc-proc.c
+++ b/arch/mips/kernel/smtc-proc.c
@@ -35,7 +35,7 @@
 atomic_t smtc_fpu_recoveries;
 
 static int proc_read_smtc(char *page, char **start, off_t off,
-                          int count, int *eof, void *data)
+			  int count, int *eof, void *data)
 {
 	int totalen = 0;
 	int len;
@@ -68,7 +68,7 @@
 		page += len;
 	}
 	len = sprintf(page, "%d Recoveries of \"stolen\" FPU\n",
-	              atomic_read(&smtc_fpu_recoveries));
+		      atomic_read(&smtc_fpu_recoveries));
 	totalen += len;
 	page += len;
 
@@ -87,5 +87,5 @@
 	atomic_set(&smtc_fpu_recoveries, 0);
 
 	smtc_stats = create_proc_read_entry("smtc", 0444, NULL,
-	                                    proc_read_smtc, NULL);
+					    proc_read_smtc, NULL);
 }
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 1d47843..7186222 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -41,6 +41,7 @@
 #include <asm/addrspace.h>
 #include <asm/smtc.h>
 #include <asm/smtc_proc.h>
+#include <asm/setup.h>
 
 /*
  * SMTC Kernel needs to manipulate low-level CPU interrupt mask
@@ -235,7 +236,7 @@
 		    mips_ihb();
 		    /* No need to un-Halt - that happens later anyway */
 		    for (i=0; i < vpes; i++) {
-		    	write_tc_c0_tcbind(i);
+			write_tc_c0_tcbind(i);
 			/*
 			 * To be 100% sure we're really getting the right
 			 * information, we exit the configuration state
@@ -286,7 +287,7 @@
 
 /*
  * Incrementally build the CPU map out of constituent MIPS MT cores,
- * using the specified available VPEs and TCs.  Plaform code needs
+ * using the specified available VPEs and TCs.	Plaform code needs
  * to ensure that each MIPS MT core invokes this routine on reset,
  * one at a time(!).
  *
@@ -348,7 +349,7 @@
 	{
 		/*
 		 * FIXME: Multi-core SMTC hasn't been tested and the
-		 *        maximum number of VPEs may change.
+		 *	  maximum number of VPEs may change.
 		 */
 		cp1contexts[0] = smtc_nconf1[0] - 1;
 		cp1contexts[1] = smtc_nconf1[1];
@@ -761,9 +762,9 @@
 	 * mask has been purged of bits corresponding to nonexistent and
 	 * offline "CPUs", and to TCs bound to VPEs other than the VPE
 	 * connected to the physical interrupt input for the interrupt
-	 * in question.  Otherwise we have a nasty problem with interrupt
+	 * in question.	 Otherwise we have a nasty problem with interrupt
 	 * mask management.  This is best handled in non-performance-critical
-	 * platform IRQ affinity setting code,  to minimize interrupt-time
+	 * platform IRQ affinity setting code,	to minimize interrupt-time
 	 * checks.
 	 */
 
@@ -899,10 +900,10 @@
 		mips_ihb();
 
 		/*
-	 	 * Inspect TCStatus - if IXMT is set, we have to queue
+		 * Inspect TCStatus - if IXMT is set, we have to queue
 		 * a message. Otherwise, we set up the "interrupt"
 		 * of the other TC
-	 	 */
+		 */
 		tcstatus = read_tc_c0_tcstatus();
 
 		if ((tcstatus & TCSTATUS_IXMT) != 0) {
@@ -964,7 +965,7 @@
 	 * CU bit of Status is indicator that TC was
 	 * already running on a kernel stack...
 	 */
-	if (tcstatus & ST0_CU0)  {
+	if (tcstatus & ST0_CU0)	 {
 		/* Note that this "- 1" is pointer arithmetic */
 		kstack = ((struct pt_regs *)read_tc_gpr_sp()) - 1;
 	} else {
@@ -1288,7 +1289,7 @@
 			for (tc = 0; tc < hook_ntcs; tc++) {
 				tcnoprog[tc] = 0;
 				clock_hang_reported[tc] = 0;
-	    		}
+			}
 			for (vpe = 0; vpe < 2; vpe++)
 				for (im = 0; im < 8; im++)
 					imstuckcount[vpe][im] = 0;
@@ -1485,7 +1486,7 @@
 
 /*
  * To really, really be sure that nothing is being done
- * by other TCs, halt them all.  This code assumes that
+ * by other TCs, halt them all.	 This code assumes that
  * a DVPE has already been done, so while their Halted
  * state is theoretically architecturally unstable, in
  * practice, it's not going to change while we're looking
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index 7f1eca3..1ff43d5 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -25,7 +25,7 @@
 static atomic_t __cpuinitdata count_count_stop = ATOMIC_INIT(0);
 static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0);
 
-#define COUNTON	100
+#define COUNTON 100
 #define NR_LOOPS 5
 
 void __cpuinit synchronise_count_master(int cpu)
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index b32466a..b79d13f 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -41,9 +41,9 @@
 
 /*
  * For historic reasons the pipe(2) syscall on MIPS has an unusual calling
- * convention.  It returns results in registers $v0 / $v1 which means there
+ * convention.	It returns results in registers $v0 / $v1 which means there
  * is no need for it to do verify the validity of a userspace pointer
- * argument.  Historically that used to be expensive in Linux.  These days
+ * argument.  Historically that used to be expensive in Linux.	These days
  * the performance advantage is negligible.
  */
 asmlinkage int sysm_pipe(void)
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 99d73b7..9d686bf 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -5,8 +5,8 @@
  *
  * Common time service routines for MIPS machines.
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -62,8 +62,8 @@
  * time_init() - it does the following things.
  *
  * 1) plat_time_init() -
- * 	a) (optional) set up RTC routines,
- *      b) (optional) calibrate and set the mips_hpt_frequency
+ *	a) (optional) set up RTC routines,
+ *	b) (optional) calibrate and set the mips_hpt_frequency
  *	    (only needed if you intended to use cpu counter as timer interrupt
  *	     source)
  * 2) calculate a couple of cached variables for later usage
@@ -75,7 +75,7 @@
  * This function exists in order to cause an error due to a duplicate
  * definition if platform code should have its own implementation.  The hook
  * to use instead is plat_time_init.  plat_time_init does not receive the
- * irqaction pointer argument anymore.  This is because any function which
+ * irqaction pointer argument anymore.	This is because any function which
  * initializes an interrupt timer now takes care of its own request_irq rsp.
  * setup_irq calls and each clock_event_device should use its own
  * struct irqrequest.
@@ -93,7 +93,7 @@
 	case CPU_R4000MC:
 		/*
 		 * V3.0 is documented as suffering from the mfc0 from count bug.
-		 * Afaik this is the last version of the R4000.  Later versions
+		 * Afaik this is the last version of the R4000.	 Later versions
 		 * were marketed as R4400.
 		 */
 		return 1;
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 9007966..a200b5b 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -164,7 +164,7 @@
 	i = 0;
 	while ((unsigned long) sp & (PAGE_SIZE - 1)) {
 		if (i && ((i % (64 / field)) == 0))
-			printk("\n       ");
+			printk("\n	 ");
 		if (i > 39) {
 			printk(" ...");
 			break;
@@ -279,7 +279,7 @@
 	printk("ra    : %0*lx %pS\n", field, regs->regs[31],
 	       (void *) regs->regs[31]);
 
-	printk("Status: %08x    ", (uint32_t) regs->cp0_status);
+	printk("Status: %08x	", (uint32_t) regs->cp0_status);
 
 	if (current_cpu_data.isa_level == MIPS_CPU_ISA_I) {
 		if (regs->cp0_status & ST0_KUO)
@@ -441,7 +441,7 @@
 	int data = regs->cp0_cause & 4;
 	int action = MIPS_BE_FATAL;
 
-	/* XXX For now.  Fixme, this searches the wrong table ...  */
+	/* XXX For now.	 Fixme, this searches the wrong table ...  */
 	if (data && !user_mode(regs))
 		fixup = search_dbe_tables(exception_epc(regs));
 
@@ -518,7 +518,7 @@
 	offset >>= 16;
 
 	vaddr = (unsigned long __user *)
-	        ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+		((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
 
 	if ((unsigned long)vaddr & 3)
 		return SIGBUS;
@@ -558,7 +558,7 @@
 	offset >>= 16;
 
 	vaddr = (unsigned long __user *)
-	        ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+		((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
 	reg = (opcode & RT) >> 16;
 
 	if ((unsigned long)vaddr & 3)
@@ -739,7 +739,7 @@
 		current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
 
 		/* Restore the hardware register state */
-		own_fpu(1);	/* Using the FPU again.  */
+		own_fpu(1);	/* Using the FPU again.	 */
 
 		/* If something went wrong, signal */
 		process_fpemu_return(sig, fault_addr);
@@ -966,7 +966,7 @@
 }
 
 static int default_cu2_call(struct notifier_block *nfb, unsigned long action,
-        void *data)
+	void *data)
 {
 	struct pt_regs *regs = data;
 
@@ -974,7 +974,7 @@
 	default:
 		die_if_kernel("Unhandled kernel unaligned access or invalid "
 			      "instruction", regs);
-		/* Fall through  */
+		/* Fall through	 */
 
 	case CU2_EXCEPTION:
 		force_sig(SIGILL, current);
@@ -1029,10 +1029,10 @@
 		/*
 		 * Old (MIPS I and MIPS II) processors will set this code
 		 * for COP1X opcode instructions that replaced the original
-		 * COP3 space.  We don't limit COP1 space instructions in
+		 * COP3 space.	We don't limit COP1 space instructions in
 		 * the emulator according to the CPU ISA, so we want to
 		 * treat COP1X instructions consistently regardless of which
-		 * code the CPU chose.  Therefore we redirect this trap to
+		 * code the CPU chose.	Therefore we redirect this trap to
 		 * the FP emulator too.
 		 *
 		 * Then some newer FPU-less processors use this code
@@ -1044,9 +1044,9 @@
 		/* Fall through.  */
 
 	case 1:
-		if (used_math())	/* Using the FPU again.  */
+		if (used_math())	/* Using the FPU again.	 */
 			own_fpu(1);
-		else {			/* First time FPU user.  */
+		else {			/* First time FPU user.	 */
 			init_fpu();
 			set_used_math();
 		}
@@ -1114,7 +1114,7 @@
 	show_regs(regs);
 
 	if (multi_match) {
-		printk("Index   : %0x\n", read_c0_index());
+		printk("Index	: %0x\n", read_c0_index());
 		printk("Pagemask: %0x\n", read_c0_pagemask());
 		printk("EntryHi : %0*lx\n", field, read_c0_entryhi());
 		printk("EntryLo0: %0*lx\n", field, read_c0_entrylo0());
@@ -1181,7 +1181,7 @@
 asmlinkage void do_reserved(struct pt_regs *regs)
 {
 	/*
-	 * Game over - no way to handle this if it ever occurs.  Most probably
+	 * Game over - no way to handle this if it ever occurs.	 Most probably
 	 * caused by a new unknown cpu type or after another deadly
 	 * hard/software error.
 	 */
@@ -1705,7 +1705,7 @@
 
 #if defined(CONFIG_KGDB)
 	if (kgdb_early_setup)
-		return;	/* Already done */
+		return; /* Already done */
 #endif
 
 	if (cpu_has_veic || cpu_has_vint) {
@@ -1799,7 +1799,7 @@
 		 * The R6000 is the only R-series CPU that features a machine
 		 * check exception (similar to the R4000 cache error) and
 		 * unaligned ldc1/sdc1 exception.  The handlers have not been
-		 * written yet.  Well, anyway there is no R6000 machine on the
+		 * written yet.	 Well, anyway there is no R6000 machine on the
 		 * current list of targets for Linux/MIPS.
 		 * (Duh, crap, there is someone with a triple R6k machine)
 		 */
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 9c58bdf..6087a54 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -21,11 +21,11 @@
  *
  * For now I enable fixing of address errors by default to make life easier.
  * I however intend to disable this somewhen in the future when the alignment
- * problems with user programs have been fixed.  For programmers this is the
+ * problems with user programs have been fixed.	 For programmers this is the
  * right way to go.
  *
  * Fixing address errors is a per process option.  The option is inherited
- * across fork(2) and execve(2) calls.  If you really want to use the
+ * across fork(2) and execve(2) calls.	If you really want to use the
  * option in your user programs - I discourage the use of the software
  * emulation strongly - use the following code in your userland stuff:
  *
@@ -43,34 +43,34 @@
  * #include <sys/sysmips.h>
  *
  * struct foo {
- *         unsigned char bar[8];
+ *	   unsigned char bar[8];
  * };
  *
  * main(int argc, char *argv[])
  * {
- *         struct foo x = {0, 1, 2, 3, 4, 5, 6, 7};
- *         unsigned int *p = (unsigned int *) (x.bar + 3);
- *         int i;
+ *	   struct foo x = {0, 1, 2, 3, 4, 5, 6, 7};
+ *	   unsigned int *p = (unsigned int *) (x.bar + 3);
+ *	   int i;
  *
- *         if (argc > 1)
- *                 sysmips(MIPS_FIXADE, atoi(argv[1]));
+ *	   if (argc > 1)
+ *		   sysmips(MIPS_FIXADE, atoi(argv[1]));
  *
- *         printf("*p = %08lx\n", *p);
+ *	   printf("*p = %08lx\n", *p);
  *
- *         *p = 0xdeadface;
+ *	   *p = 0xdeadface;
  *
- *         for(i = 0; i <= 7; i++)
- *         printf("%02x ", x.bar[i]);
- *         printf("\n");
+ *	   for(i = 0; i <= 7; i++)
+ *	   printf("%02x ", x.bar[i]);
+ *	   printf("\n");
  * }
  *
  * Coprocessor loads are not supported; I think this case is unimportant
  * in the practice.
  *
  * TODO: Handle ndc (attempted store to doubleword in uncached memory)
- *       exception for the R6000.
- *       A store crossing a page boundary might be executed only partially.
- *       Undo the partial store in this case.
+ *	 exception for the R6000.
+ *	 A store crossing a page boundary might be executed only partially.
+ *	 Undo the partial store in this case.
  */
 #include <linux/mm.h>
 #include <linux/signal.h>
@@ -86,7 +86,7 @@
 #include <asm/inst.h>
 #include <asm/uaccess.h>
 
-#define STR(x)  __STR(x)
+#define STR(x)	__STR(x)
 #define __STR(x)  #x
 
 enum {
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 0a4336b..05826d2 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -22,12 +22,12 @@
 
 #ifdef CONFIG_32BIT
 	#ifdef CONFIG_CPU_LITTLE_ENDIAN
-		jiffies  = jiffies_64;
+		jiffies	 = jiffies_64;
 	#else
-		jiffies  = jiffies_64 + 4;
+		jiffies	 = jiffies_64 + 4;
 	#endif
 #else
-	jiffies  = jiffies_64;
+	jiffies	 = jiffies_64;
 #endif
 
 SECTIONS
@@ -139,7 +139,7 @@
 
 	/*
 	 * Force .bss to 64K alignment so that .bss..swapper_pg_dir
-	 * gets that alignment.  .sbss should be empty, so there will be
+	 * gets that alignment.	 .sbss should be empty, so there will be
 	 * no holes after __init_end. */
 	BSS_SECTION(0, 0x10000, 0)
 
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 2993365..1765bab 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -254,7 +254,7 @@
 	       val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
 }
 
-/* Find some VPE program space  */
+/* Find some VPE program space	*/
 static void *alloc_progmem(unsigned long len)
 {
 	void *addr;
@@ -292,7 +292,7 @@
 }
 
 /* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
-   might -- code, read-only data, read-write data, small data.  Tally
+   might -- code, read-only data, read-write data, small data.	Tally
    sizes, and place the offsets into sh_entsize fields: high bit means it
    belongs in init. */
 static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
@@ -386,7 +386,7 @@
 
 	if( (rel > 32768) || (rel < -32768) ) {
 		printk(KERN_DEBUG "VPE loader: "
- 		       "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
+		       "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
 		return -ENOEXEC;
 	}
 
@@ -458,7 +458,7 @@
 	Elf32_Addr val, vallo;
 	struct mips_hi16 *l, *next;
 
-	/* Sign extend the addend we extract from the lo insn.  */
+	/* Sign extend the addend we extract from the lo insn.	*/
 	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
 
 	if (mips_hi16_list != NULL) {
@@ -470,7 +470,7 @@
 			/*
 			 * The value for the HI16 had best be the same.
 			 */
- 			if (v != l->value) {
+			if (v != l->value) {
 				printk(KERN_DEBUG "VPE loader: "
 				       "apply_r_mips_lo16/hi16: \t"
 				       "inconsistent value information\n");
@@ -505,7 +505,7 @@
 	}
 
 	/*
-	 * Ok, we're done with the HI16 relocs.  Now deal with the LO16.
+	 * Ok, we're done with the HI16 relocs.	 Now deal with the LO16.
 	 */
 	val = v + vallo;
 	insnlo = (insnlo & ~0xffff) | (val & 0xffff);
@@ -579,7 +579,7 @@
 		res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
 		if( res ) {
 			char *r = rstrs[ELF32_R_TYPE(r_info)];
-		    	printk(KERN_WARNING "VPE loader: .text+0x%x "
+			printk(KERN_WARNING "VPE loader: .text+0x%x "
 			       "relocation type %s for symbol \"%s\" failed\n",
 			       rel[i].r_offset, r ? r : "UNKNOWN",
 			       strtab + sym->st_name);
@@ -697,18 +697,7 @@
 	dmt_flag = dmt();
 	vpeflags = dvpe();
 
-	if (!list_empty(&v->tc)) {
-		if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
-			evpe(vpeflags);
-			emt(dmt_flag);
-			local_irq_restore(flags);
-
-			printk(KERN_WARNING
-			       "VPE loader: TC %d is already in use.\n",
-			       v->tc->index);
-			return -ENOEXEC;
-		}
-	} else {
+	if (list_empty(&v->tc)) {
 		evpe(vpeflags);
 		emt(dmt_flag);
 		local_irq_restore(flags);
@@ -720,6 +709,8 @@
 		return -ENOEXEC;
 	}
 
+	t = list_first_entry(&v->tc, struct tc, tc);
+
 	/* Put MVPE's into 'configuration state' */
 	set_c0_mvpcontrol(MVPCONTROL_VPC);
 
@@ -772,7 +763,7 @@
 
 	/* Set up the XTC bit in vpeconf0 to point at our tc */
 	write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC))
-	                      | (t->index << VPECONF0_XTC_SHIFT));
+			      | (t->index << VPECONF0_XTC_SHIFT));
 
 	back_to_back_c0_hazard();
 
@@ -926,34 +917,34 @@
 			       secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr);
 		}
 
- 		/* Fix up syms, so that st_value is a pointer to location. */
- 		simplify_symbols(sechdrs, symindex, strtab, secstrings,
- 				 hdr->e_shnum, &mod);
+		/* Fix up syms, so that st_value is a pointer to location. */
+		simplify_symbols(sechdrs, symindex, strtab, secstrings,
+				 hdr->e_shnum, &mod);
 
- 		/* Now do relocations. */
- 		for (i = 1; i < hdr->e_shnum; i++) {
- 			const char *strtab = (char *)sechdrs[strindex].sh_addr;
- 			unsigned int info = sechdrs[i].sh_info;
+		/* Now do relocations. */
+		for (i = 1; i < hdr->e_shnum; i++) {
+			const char *strtab = (char *)sechdrs[strindex].sh_addr;
+			unsigned int info = sechdrs[i].sh_info;
 
- 			/* Not a valid relocation section? */
- 			if (info >= hdr->e_shnum)
- 				continue;
+			/* Not a valid relocation section? */
+			if (info >= hdr->e_shnum)
+				continue;
 
- 			/* Don't bother with non-allocated sections */
- 			if (!(sechdrs[info].sh_flags & SHF_ALLOC))
- 				continue;
+			/* Don't bother with non-allocated sections */
+			if (!(sechdrs[info].sh_flags & SHF_ALLOC))
+				continue;
 
- 			if (sechdrs[i].sh_type == SHT_REL)
- 				err = apply_relocations(sechdrs, strtab, symindex, i,
- 							&mod);
- 			else if (sechdrs[i].sh_type == SHT_RELA)
- 				err = apply_relocate_add(sechdrs, strtab, symindex, i,
- 							 &mod);
- 			if (err < 0)
- 				return err;
+			if (sechdrs[i].sh_type == SHT_REL)
+				err = apply_relocations(sechdrs, strtab, symindex, i,
+							&mod);
+			else if (sechdrs[i].sh_type == SHT_RELA)
+				err = apply_relocate_add(sechdrs, strtab, symindex, i,
+							 &mod);
+			if (err < 0)
+				return err;
 
-  		}
-  	} else {
+		}
+	} else {
 		struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff);
 
 		for (i = 0; i < hdr->e_phnum; i++) {
@@ -968,16 +959,16 @@
 		}
 
 		for (i = 0; i < hdr->e_shnum; i++) {
- 			/* Internal symbols and strings. */
- 			if (sechdrs[i].sh_type == SHT_SYMTAB) {
- 				symindex = i;
- 				strindex = sechdrs[i].sh_link;
- 				strtab = (char *)hdr + sechdrs[strindex].sh_offset;
+			/* Internal symbols and strings. */
+			if (sechdrs[i].sh_type == SHT_SYMTAB) {
+				symindex = i;
+				strindex = sechdrs[i].sh_link;
+				strtab = (char *)hdr + sechdrs[strindex].sh_offset;
 
- 				/* mark the symtab's address for when we try to find the
- 				   magic symbols */
- 				sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
- 			}
+				/* mark the symtab's address for when we try to find the
+				   magic symbols */
+				sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
+			}
 		}
 	}
 
@@ -1049,7 +1040,7 @@
 	return ret;
 }
 
-/* checks VPE is unused and gets ready to load program  */
+/* checks VPE is unused and gets ready to load program	*/
 static int vpe_open(struct inode *inode, struct file *filp)
 {
 	enum vpe_state state;
@@ -1121,11 +1112,11 @@
 		if (vpe_elfload(v) >= 0) {
 			vpe_run(v);
 		} else {
- 			printk(KERN_WARNING "VPE loader: ELF load failed.\n");
+			printk(KERN_WARNING "VPE loader: ELF load failed.\n");
 			ret = -ENOEXEC;
 		}
 	} else {
- 		printk(KERN_WARNING "VPE loader: only elf files are supported\n");
+		printk(KERN_WARNING "VPE loader: only elf files are supported\n");
 		ret = -ENOEXEC;
 	}
 
diff --git a/arch/mips/kernel/watch.c b/arch/mips/kernel/watch.c
index c154069..7726f61 100644
--- a/arch/mips/kernel/watch.c
+++ b/arch/mips/kernel/watch.c
@@ -12,7 +12,7 @@
 #include <asm/watch.h>
 
 /*
- * Install the watch registers for the current thread.  A maximum of
+ * Install the watch registers for the current thread.	A maximum of
  * four registers are installed although the machine may have more.
  */
 void mips_install_watch_registers(void)
@@ -72,7 +72,7 @@
  }
 
 /*
- * Disable all watch registers.  Although only four registers are
+ * Disable all watch registers.	 Although only four registers are
  * installed, all are cleared to eliminate the possibility of endless
  * looping in the watch handler.
  */
diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
index ce2f129..3fc2e6d 100644
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@@ -26,13 +26,15 @@
 #include "prom.h"
 
 /* lantiq socs have 3 static clocks */
-static struct clk cpu_clk_generic[3];
+static struct clk cpu_clk_generic[4];
 
-void clkdev_add_static(unsigned long cpu, unsigned long fpi, unsigned long io)
+void clkdev_add_static(unsigned long cpu, unsigned long fpi,
+			unsigned long io, unsigned long ppe)
 {
 	cpu_clk_generic[0].rate = cpu;
 	cpu_clk_generic[1].rate = fpi;
 	cpu_clk_generic[2].rate = io;
+	cpu_clk_generic[3].rate = ppe;
 }
 
 struct clk *clk_get_cpu(void)
@@ -51,6 +53,12 @@
 	return &cpu_clk_generic[2];
 }
 
+struct clk *clk_get_ppe(void)
+{
+	return &cpu_clk_generic[3];
+}
+EXPORT_SYMBOL_GPL(clk_get_ppe);
+
 static inline int clk_good(struct clk *clk)
 {
 	return clk && !IS_ERR(clk);
@@ -145,9 +153,9 @@
 	u32 res;
 
 	__asm__ __volatile__(
-		".set   push\n"
-		".set   mips32r2\n"
-		"rdhwr  %0, $3\n"
+		".set	push\n"
+		".set	mips32r2\n"
+		"rdhwr	%0, $3\n"
 		".set pop\n"
 		: "=&r" (res)
 		: /* no input */
diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h
index fa67060..77e4bdb 100644
--- a/arch/mips/lantiq/clk.h
+++ b/arch/mips/lantiq/clk.h
@@ -27,12 +27,15 @@
 #define CLOCK_167M	166666667
 #define CLOCK_196_608M	196608000
 #define CLOCK_200M	200000000
+#define CLOCK_222M	222000000
+#define CLOCK_240M	240000000
 #define CLOCK_250M	250000000
 #define CLOCK_266M	266666666
 #define CLOCK_300M	300000000
 #define CLOCK_333M	333333333
 #define CLOCK_393M	393215332
 #define CLOCK_400M	400000000
+#define CLOCK_450M	450000000
 #define CLOCK_500M	500000000
 #define CLOCK_600M	600000000
 
@@ -64,15 +67,17 @@
 };
 
 extern void clkdev_add_static(unsigned long cpu, unsigned long fpi,
-				unsigned long io);
+				unsigned long io, unsigned long ppe);
 
 extern unsigned long ltq_danube_cpu_hz(void);
 extern unsigned long ltq_danube_fpi_hz(void);
+extern unsigned long ltq_danube_pp32_hz(void);
 
 extern unsigned long ltq_ar9_cpu_hz(void);
 extern unsigned long ltq_ar9_fpi_hz(void);
 
 extern unsigned long ltq_vr9_cpu_hz(void);
 extern unsigned long ltq_vr9_fpi_hz(void);
+extern unsigned long ltq_vr9_pp32_hz(void);
 
 #endif
diff --git a/arch/mips/lantiq/dts/danube.dtsi b/arch/mips/lantiq/dts/danube.dtsi
index 3a4520f..d4c59e0 100644
--- a/arch/mips/lantiq/dts/danube.dtsi
+++ b/arch/mips/lantiq/dts/danube.dtsi
@@ -97,7 +97,7 @@
 			compatible = "lantiq,pci-xway";
 			bus-range = <0x0 0x0>;
 			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000	/* pci memory */
-				  0x1000000 0 0x00000000 0xAE00000 0 0x200000>;	/* io space */
+				  0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 			reg = <0x7000000 0x8000		/* config space */
 				0xE105400 0x400>;	/* pci bridge */
 		};
diff --git a/arch/mips/lantiq/dts/easy50712.dts b/arch/mips/lantiq/dts/easy50712.dts
index 68c1731..fac1f5b 100644
--- a/arch/mips/lantiq/dts/easy50712.dts
+++ b/arch/mips/lantiq/dts/easy50712.dts
@@ -103,7 +103,7 @@
 			lantiq,bus-clock = <33333333>;
 			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
-                                0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+				0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
 			>;
 			gpios-reset = <&gpio 21 0>;
 			req-mask = <0x1>;		/* GNT1 */
diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
index 2d4ced3..ff4894a 100644
--- a/arch/mips/lantiq/falcon/sysctrl.c
+++ b/arch/mips/lantiq/falcon/sysctrl.c
@@ -241,9 +241,9 @@
 
 	/* get our 3 static rates for cpu, fpi and io clocks */
 	if (ltq_sys1_r32(SYS1_CPU0CC) & CPU0CC_CPUDIV)
-		clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M);
+		clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M, 0);
 	else
-		clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M);
+		clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M, 0);
 
 	/* add our clock domains */
 	clkdev_add_sys("1d810000.gpio", SYSCTL_SYSETH, ACTS_P0);
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index a7935bf..5119487 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -33,17 +33,10 @@
 /* register definitions - external irqs */
 #define LTQ_EIU_EXIN_C		0x0000
 #define LTQ_EIU_EXIN_INIC	0x0004
+#define LTQ_EIU_EXIN_INC	0x0008
 #define LTQ_EIU_EXIN_INEN	0x000C
 
-/* irq numbers used by the external interrupt unit (EIU) */
-#define LTQ_EIU_IR0		(INT_NUM_IM4_IRL0 + 30)
-#define LTQ_EIU_IR1		(INT_NUM_IM3_IRL0 + 31)
-#define LTQ_EIU_IR2		(INT_NUM_IM1_IRL0 + 26)
-#define LTQ_EIU_IR3		INT_NUM_IM1_IRL0
-#define LTQ_EIU_IR4		(INT_NUM_IM1_IRL0 + 1)
-#define LTQ_EIU_IR5		(INT_NUM_IM1_IRL0 + 2)
-#define LTQ_EIU_IR6		(INT_NUM_IM2_IRL0 + 30)
-#define XWAY_EXIN_COUNT		3
+/* number of external interrupts */
 #define MAX_EIU			6
 
 /* the performance counter */
@@ -72,20 +65,19 @@
 int gic_present;
 #endif
 
-static unsigned short ltq_eiu_irq[MAX_EIU] = {
-	LTQ_EIU_IR0,
-	LTQ_EIU_IR1,
-	LTQ_EIU_IR2,
-	LTQ_EIU_IR3,
-	LTQ_EIU_IR4,
-	LTQ_EIU_IR5,
-};
-
 static int exin_avail;
+static struct resource ltq_eiu_irq[MAX_EIU];
 static void __iomem *ltq_icu_membase[MAX_IM];
 static void __iomem *ltq_eiu_membase;
 static struct irq_domain *ltq_domain;
 
+int ltq_eiu_get_irq(int exin)
+{
+	if (exin < exin_avail)
+		return ltq_eiu_irq[exin].start;
+	return -1;
+}
+
 void ltq_disable_irq(struct irq_data *d)
 {
 	u32 ier = LTQ_ICU_IM0_IER;
@@ -128,19 +120,65 @@
 	ltq_icu_w32(im, ltq_icu_r32(im, ier) | BIT(offset), ier);
 }
 
+static int ltq_eiu_settype(struct irq_data *d, unsigned int type)
+{
+	int i;
+
+	for (i = 0; i < MAX_EIU; i++) {
+		if (d->hwirq == ltq_eiu_irq[i].start) {
+			int val = 0;
+			int edge = 0;
+
+			switch (type) {
+			case IRQF_TRIGGER_NONE:
+				break;
+			case IRQF_TRIGGER_RISING:
+				val = 1;
+				edge = 1;
+				break;
+			case IRQF_TRIGGER_FALLING:
+				val = 2;
+				edge = 1;
+				break;
+			case IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING:
+				val = 3;
+				edge = 1;
+				break;
+			case IRQF_TRIGGER_HIGH:
+				val = 5;
+				break;
+			case IRQF_TRIGGER_LOW:
+				val = 6;
+				break;
+			default:
+				pr_err("invalid type %d for irq %ld\n",
+					type, d->hwirq);
+				return -EINVAL;
+			}
+
+			if (edge)
+				irq_set_handler(d->hwirq, handle_edge_irq);
+
+			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) |
+				(val << (i * 4)), LTQ_EIU_EXIN_C);
+		}
+	}
+
+	return 0;
+}
+
 static unsigned int ltq_startup_eiu_irq(struct irq_data *d)
 {
 	int i;
 
 	ltq_enable_irq(d);
 	for (i = 0; i < MAX_EIU; i++) {
-		if (d->hwirq == ltq_eiu_irq[i]) {
-			/* low level - we should really handle set_type */
-			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) |
-				(0x6 << (i * 4)), LTQ_EIU_EXIN_C);
+		if (d->hwirq == ltq_eiu_irq[i].start) {
+			/* by default we are low level triggered */
+			ltq_eiu_settype(d, IRQF_TRIGGER_LOW);
 			/* clear all pending */
-			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INIC) & ~BIT(i),
-				LTQ_EIU_EXIN_INIC);
+			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INC) & ~BIT(i),
+				LTQ_EIU_EXIN_INC);
 			/* enable */
 			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) | BIT(i),
 				LTQ_EIU_EXIN_INEN);
@@ -157,7 +195,7 @@
 
 	ltq_disable_irq(d);
 	for (i = 0; i < MAX_EIU; i++) {
-		if (d->hwirq == ltq_eiu_irq[i]) {
+		if (d->hwirq == ltq_eiu_irq[i].start) {
 			/* disable */
 			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~BIT(i),
 				LTQ_EIU_EXIN_INEN);
@@ -186,6 +224,7 @@
 	.irq_ack = ltq_ack_irq,
 	.irq_mask = ltq_disable_irq,
 	.irq_mask_ack = ltq_mask_and_ack_irq,
+	.irq_set_type = ltq_eiu_settype,
 };
 
 static void ltq_hw_irqdispatch(int module)
@@ -301,7 +340,7 @@
 		return 0;
 
 	for (i = 0; i < exin_avail; i++)
-		if (hw == ltq_eiu_irq[i])
+		if (hw == ltq_eiu_irq[i].start)
 			chip = &ltq_eiu_type;
 
 	irq_set_chip_and_handler(hw, chip, handle_level_irq);
@@ -323,7 +362,7 @@
 {
 	struct device_node *eiu_node;
 	struct resource res;
-	int i;
+	int i, ret;
 
 	for (i = 0; i < MAX_IM; i++) {
 		if (of_address_to_resource(node, i, &res))
@@ -340,17 +379,19 @@
 	}
 
 	/* the external interrupts are optional and xway only */
-	eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu");
+	eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
 	if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
 		/* find out how many external irq sources we have */
-		const __be32 *count = of_get_property(node,
-							"lantiq,count",	NULL);
+		exin_avail = of_irq_count(eiu_node);
 
-		if (count)
-			exin_avail = *count;
 		if (exin_avail > MAX_EIU)
 			exin_avail = MAX_EIU;
 
+		ret = of_irq_to_resource_table(eiu_node,
+						ltq_eiu_irq, exin_avail);
+		if (ret != exin_avail)
+			panic("failed to load external irq resources\n");
+
 		if (request_mem_region(res.start, resource_size(&res),
 							res.name) < 0)
 			pr_err("Failed to request eiu memory");
diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h
index a3fa1a2..8e07b5f 100644
--- a/arch/mips/lantiq/prom.h
+++ b/arch/mips/lantiq/prom.h
@@ -10,7 +10,7 @@
 #define _LTQ_PROM_H__
 
 #define LTQ_SYS_TYPE_LEN	0x100
-#define LTQ_SYS_REV_LEN         0x10
+#define LTQ_SYS_REV_LEN		0x10
 
 struct ltq_soc_info {
 	unsigned char *name;
diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
index 9aa17f7..1ab576d 100644
--- a/arch/mips/lantiq/xway/clk.c
+++ b/arch/mips/lantiq/xway/clk.c
@@ -53,6 +53,29 @@
 	}
 }
 
+unsigned long ltq_danube_pp32_hz(void)
+{
+	unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 7) & 3;
+	unsigned long clk;
+
+	switch (clksys) {
+	case 1:
+		clk = CLOCK_240M;
+		break;
+	case 2:
+		clk = CLOCK_222M;
+		break;
+	case 3:
+		clk = CLOCK_133M;
+		break;
+	default:
+		clk = CLOCK_266M;
+		break;
+	}
+
+	return clk;
+}
+
 unsigned long ltq_ar9_sys_hz(void)
 {
 	if (((ltq_cgu_r32(CGU_SYS) >> 3) & 0x3) == 0x2)
@@ -149,3 +172,23 @@
 
 	return clk;
 }
+
+unsigned long ltq_vr9_pp32_hz(void)
+{
+	unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 3;
+	unsigned long clk;
+
+	switch (clksys) {
+	case 1:
+		clk = CLOCK_450M;
+		break;
+	case 2:
+		clk = CLOCK_300M;
+		break;
+	default:
+		clk = CLOCK_500M;
+		break;
+	}
+
+	return clk;
+}
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
index 544dbb7..1fa0f17 100644
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -78,10 +78,19 @@
 /* reset and boot a gphy. these phys only exist on xrx200 SoC */
 int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr)
 {
+	struct clk *clk;
+
 	if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) {
 		dev_err(dev, "this SoC has no GPHY\n");
 		return -EINVAL;
 	}
+
+	clk = clk_get_sys("1f203000.rcu", "gphy");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	clk_enable(clk);
+
 	if (id > 1) {
 		dev_err(dev, "%u is an invalid gphy id\n", id);
 		return -EINVAL;
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index 3925e66..c24924f 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -305,7 +305,7 @@
 
 	/* check if all the core register ranges are available */
 	if (!np_pmu || !np_cgu || !np_ebu)
-		panic("Failed to load core nodess from devicetree");
+		panic("Failed to load core nodes from devicetree");
 
 	if (of_address_to_resource(np_pmu, 0, &res_pmu) ||
 			of_address_to_resource(np_cgu, 0, &res_cgu) ||
@@ -356,14 +356,16 @@
 
 	if (of_machine_is_compatible("lantiq,ase")) {
 		if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
-			clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
+			clkdev_add_static(CLOCK_266M, CLOCK_133M,
+						CLOCK_133M, CLOCK_266M);
 		else
-			clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
+			clkdev_add_static(CLOCK_133M, CLOCK_133M,
+						CLOCK_133M, CLOCK_133M);
 		clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY),
 		clkdev_add_pmu("1e180000.etop", "ephy", 0, PMU_EPHY);
 	} else if (of_machine_is_compatible("lantiq,vr9")) {
 		clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
-				ltq_vr9_fpi_hz());
+				ltq_vr9_fpi_hz(), ltq_vr9_pp32_hz());
 		clkdev_add_pmu("1d900000.pcie", "phy", 1, PMU1_PCIE_PHY);
 		clkdev_add_pmu("1d900000.pcie", "bus", 0, PMU_PCIE_CLK);
 		clkdev_add_pmu("1d900000.pcie", "msi", 1, PMU1_PCIE_MSI);
@@ -374,12 +376,13 @@
 				PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
 				PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
 				PMU_PPE_QSB | PMU_PPE_TOP);
+		clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY);
 	} else if (of_machine_is_compatible("lantiq,ar9")) {
 		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
-				ltq_ar9_fpi_hz());
+				ltq_ar9_fpi_hz(), CLOCK_250M);
 		clkdev_add_pmu("1e180000.etop", "switch", 0, PMU_SWITCH);
 	} else {
 		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
-				ltq_danube_fpi_hz());
+				ltq_danube_fpi_hz(), ltq_danube_pp32_hz());
 	}
 }
diff --git a/arch/mips/lasat/Makefile b/arch/mips/lasat/Makefile
index 9cc4e4d..869bd3b 100644
--- a/arch/mips/lasat/Makefile
+++ b/arch/mips/lasat/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the LASAT specific kernel interface routines under Linux.
 #
 
-obj-y	 			+= reset.o setup.o prom.o lasat_board.o \
+obj-y				+= reset.o setup.o prom.o lasat_board.o \
 				   at93c.o interrupt.o serial.o
 
 obj-$(CONFIG_LASAT_SYSCTL)	+= sysctl.o
diff --git a/arch/mips/lasat/ds1603.h b/arch/mips/lasat/ds1603.h
index 2da3704..3e718b1 100644
--- a/arch/mips/lasat/ds1603.h
+++ b/arch/mips/lasat/ds1603.h
@@ -25,7 +25,7 @@
 void ds1603_disable(void);
 void ds1603_init(struct ds_defs *);
 
-#define TRIMMER_DEFAULT	3
+#define TRIMMER_DEFAULT 3
 #define TRIMMER_DISABLE_RTC 0
 
 #endif
diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile
index 460626b..dfb509d 100644
--- a/arch/mips/lasat/image/Makefile
+++ b/arch/mips/lasat/image/Makefile
@@ -28,7 +28,7 @@
 
 OBJECTS = head.o kImage.o
 
-rom.sw:	$(obj)/rom.sw
+rom.sw: $(obj)/rom.sw
 rom.bin:	$(obj)/rom.bin
 
 $(obj)/rom.sw:	$(obj)/rom.bin
diff --git a/arch/mips/lasat/image/head.S b/arch/mips/lasat/image/head.S
index e0ecda9..41babbe 100644
--- a/arch/mips/lasat/image/head.S
+++ b/arch/mips/lasat/image/head.S
@@ -7,7 +7,7 @@
 
 	/* Magic words identifying a software image */
 	.word	LASAT_K_MAGIC0_VAL
-	.word 	LASAT_K_MAGIC1_VAL
+	.word	LASAT_K_MAGIC1_VAL
 
 	/* Image header version */
 	.word	0x00000002
diff --git a/arch/mips/lasat/picvue.c b/arch/mips/lasat/picvue.c
index d3d04c3..7eb3348 100644
--- a/arch/mips/lasat/picvue.c
+++ b/arch/mips/lasat/picvue.c
@@ -163,12 +163,12 @@
 }
 
 #define FUNC_SET_CMD	0x20
-#define  EIGHT_BYTE	(1 << 4)
-#define  FOUR_BYTE	0
-#define  TWO_LINES	(1 << 3)
-#define  ONE_LINE	0
-#define  LARGE_FONT	(1 << 2)
-#define  SMALL_FONT	0
+#define	 EIGHT_BYTE	(1 << 4)
+#define	 FOUR_BYTE	0
+#define	 TWO_LINES	(1 << 3)
+#define	 ONE_LINE	0
+#define	 LARGE_FONT	(1 << 2)
+#define	 SMALL_FONT	0
 
 static void pvc_funcset(u8 cmd)
 {
@@ -177,9 +177,9 @@
 }
 
 #define ENTRYMODE_CMD		0x4
-#define  AUTO_INC		(1 << 1)
-#define  AUTO_DEC		0
-#define  CURSOR_FOLLOWS_DISP	(1 << 0)
+#define	 AUTO_INC		(1 << 1)
+#define	 AUTO_DEC		0
+#define	 CURSOR_FOLLOWS_DISP	(1 << 0)
 
 static void pvc_entrymode(u8 cmd)
 {
@@ -188,20 +188,20 @@
 }
 
 #define DISP_CNT_CMD	0x08
-#define  DISP_OFF	0
-#define  DISP_ON	(1 << 2)
-#define  CUR_ON		(1 << 1)
-#define  CUR_BLINK	(1 << 0)
+#define	 DISP_OFF	0
+#define	 DISP_ON	(1 << 2)
+#define	 CUR_ON		(1 << 1)
+#define	 CUR_BLINK	(1 << 0)
 void pvc_dispcnt(u8 cmd)
 {
 	pvc_write(DISP_CNT_CMD | (cmd & (DISP_ON|CUR_ON|CUR_BLINK)), MODE_INST);
 }
 
 #define MOVE_CMD	0x10
-#define  DISPLAY	(1 << 3)
-#define  CURSOR		0
-#define  RIGHT		(1 << 2)
-#define  LEFT		0
+#define	 DISPLAY	(1 << 3)
+#define	 CURSOR		0
+#define	 RIGHT		(1 << 2)
+#define	 LEFT		0
 void pvc_move(u8 cmd)
 {
 	pvc_write(MOVE_CMD | (cmd & (DISPLAY|RIGHT)), MODE_INST);
diff --git a/arch/mips/lasat/picvue.h b/arch/mips/lasat/picvue.h
index 2f07577..d0119fc 100644
--- a/arch/mips/lasat/picvue.h
+++ b/arch/mips/lasat/picvue.h
@@ -29,16 +29,16 @@
 int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE]);
 
 void pvc_dispcnt(u8 cmd);
-#define  DISP_OFF	0
-#define  DISP_ON	(1 << 2)
-#define  CUR_ON		(1 << 1)
-#define  CUR_BLINK	(1 << 0)
+#define	 DISP_OFF	0
+#define	 DISP_ON	(1 << 2)
+#define	 CUR_ON		(1 << 1)
+#define	 CUR_BLINK	(1 << 0)
 
 void pvc_move(u8 cmd);
-#define  DISPLAY	(1 << 3)
-#define  CURSOR		0
-#define  RIGHT		(1 << 2)
-#define  LEFT		0
+#define	 DISPLAY	(1 << 3)
+#define	 CURSOR		0
+#define	 RIGHT		(1 << 2)
+#define	 LEFT		0
 
 void pvc_clear(void);
 void pvc_home(void);
diff --git a/arch/mips/lasat/serial.c b/arch/mips/lasat/serial.c
index 5bcb6e8..2e5fbed 100644
--- a/arch/mips/lasat/serial.c
+++ b/arch/mips/lasat/serial.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Lasat UART platform device.
  *
- *  Copyright (C) 2007  Brian Murphy <brian@murphy.dk>
+ *  Copyright (C) 2007	Brian Murphy <brian@murphy.dk>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index d87ffd0..f27694f 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -134,8 +134,8 @@
 	} else {
 		ip = *(unsigned int *)(table->data);
 		sprintf(ipbuf, "%d.%d.%d.%d",
-			(ip)       & 0xff,
-			(ip >>  8) & 0xff,
+			(ip)	   & 0xff,
+			(ip >>	8) & 0xff,
 			(ip >> 16) & 0xff,
 			(ip >> 24) & 0xff);
 		len = strlen(ipbuf);
diff --git a/arch/mips/lib/bitops.c b/arch/mips/lib/bitops.c
index 239a9c9..81f1dcf 100644
--- a/arch/mips/lib/bitops.c
+++ b/arch/mips/lib/bitops.c
@@ -56,7 +56,7 @@
 
 
 /**
- * __mips_change_bit - Toggle a bit in memory.  This is called by change_bit()
+ * __mips_change_bit - Toggle a bit in memory.	This is called by change_bit()
  * if it cannot find a faster solution.
  * @nr: Bit to change
  * @addr: Address to start counting from
@@ -155,7 +155,7 @@
 
 
 /**
- * __mips_test_and_change_bit - Change a bit and return its old value.  This is
+ * __mips_test_and_change_bit - Change a bit and return its old value.	This is
  * called by test_and_change_bit() if it cannot find a faster solution.
  * @nr: Bit to change
  * @addr: Address to count from
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
index 6b876ca..507147a 100644
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@@ -67,8 +67,8 @@
 #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3)	\
 	LOAD	_t0, (offset + UNIT(0))(src);			\
 	LOAD	_t1, (offset + UNIT(1))(src);			\
-	LOAD	_t2, (offset + UNIT(2))(src); 			\
-	LOAD	_t3, (offset + UNIT(3))(src); 			\
+	LOAD	_t2, (offset + UNIT(2))(src);			\
+	LOAD	_t3, (offset + UNIT(3))(src);			\
 	ADDC(sum, _t0);						\
 	ADDC(sum, _t1);						\
 	ADDC(sum, _t2);						\
@@ -285,7 +285,7 @@
 1:
 #endif
 	.set	reorder
-	/* Add the passed partial csum.  */
+	/* Add the passed partial csum.	 */
 	ADDC32(sum, a2)
 	jr	ra
 	.set	noreorder
@@ -298,7 +298,7 @@
  *	csum_partial_copy_nocheck(src, dst, len, sum)
  *	__csum_partial_copy_user(src, dst, len, sum, errp)
  *
- * See "Spec" in memcpy.S for details.  Unlike __copy_user, all
+ * See "Spec" in memcpy.S for details.	Unlike __copy_user, all
  * function in this file use the standard calling convention.
  */
 
@@ -371,16 +371,16 @@
 
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
 #define LDFIRST LOADR
-#define LDREST  LOADL
+#define LDREST	LOADL
 #define STFIRST STORER
-#define STREST  STOREL
+#define STREST	STOREL
 #define SHIFT_DISCARD SLLV
 #define SHIFT_DISCARD_REVERT SRLV
 #else
 #define LDFIRST LOADL
-#define LDREST  LOADR
+#define LDREST	LOADR
 #define STFIRST STOREL
-#define STREST  STORER
+#define STREST	STORER
 #define SHIFT_DISCARD SRLV
 #define SHIFT_DISCARD_REVERT SLLV
 #endif
@@ -430,7 +430,7 @@
 	 * src and dst are aligned; need to compute rem
 	 */
 .Lboth_aligned:
-	 SRL	t0, len, LOG_NBYTES+3    # +3 for 8 units/iter
+	 SRL	t0, len, LOG_NBYTES+3	 # +3 for 8 units/iter
 	beqz	t0, .Lcleanup_both_aligned # len < 8*NBYTES
 	 nop
 	SUB	len, 8*NBYTES		# subtract here for bgez loop
@@ -518,7 +518,7 @@
 	/*
 	 * src and dst are aligned, need to copy rem bytes (rem < NBYTES)
 	 * A loop would do only a byte at a time with possible branch
-	 * mispredicts.  Can't do an explicit LOAD dst,mask,or,STORE
+	 * mispredicts.	 Can't do an explicit LOAD dst,mask,or,STORE
 	 * because can't assume read-access to dst.  Instead, use
 	 * STREST dst, which doesn't require read access to dst.
 	 *
@@ -532,7 +532,7 @@
 	li	bits, 8*NBYTES
 	SLL	rem, len, 3	# rem = number of bits to keep
 EXC(	LOAD	t0, 0(src),		.Ll_exc)
-	SUB	bits, bits, rem	# bits = number of bits to discard
+	SUB	bits, bits, rem # bits = number of bits to discard
 	SHIFT_DISCARD t0, t0, bits
 EXC(	STREST	t0, -1(t1),		.Ls_exc)
 	SHIFT_DISCARD_REVERT t0, t0, bits
@@ -551,7 +551,7 @@
 	 * Set match = (src and dst have same alignment)
 	 */
 #define match rem
-EXC(	LDFIRST	t3, FIRST(0)(src),	.Ll_exc)
+EXC(	LDFIRST t3, FIRST(0)(src),	.Ll_exc)
 	ADD	t2, zero, NBYTES
 EXC(	LDREST	t3, REST(0)(src),	.Ll_exc_copy)
 	SUB	t2, t2, t1	# t2 = number of bytes copied
@@ -568,9 +568,9 @@
 	 ADD	src, src, t2
 
 .Lsrc_unaligned_dst_aligned:
-	SRL	t0, len, LOG_NBYTES+2    # +2 for 4 units/iter
+	SRL	t0, len, LOG_NBYTES+2	 # +2 for 4 units/iter
 	beqz	t0, .Lcleanup_src_unaligned
-	 and	rem, len, (4*NBYTES-1)   # rem = len % 4*NBYTES
+	 and	rem, len, (4*NBYTES-1)	 # rem = len % 4*NBYTES
 1:
 /*
  * Avoid consecutive LD*'s to the same register since some mips
@@ -578,13 +578,13 @@
  * It's OK to load FIRST(N+1) before REST(N) because the two addresses
  * are to the same unit (unless src is aligned, but it's not).
  */
-EXC(	LDFIRST	t0, FIRST(0)(src),	.Ll_exc)
-EXC(	LDFIRST	t1, FIRST(1)(src),	.Ll_exc_copy)
-	SUB     len, len, 4*NBYTES
+EXC(	LDFIRST t0, FIRST(0)(src),	.Ll_exc)
+EXC(	LDFIRST t1, FIRST(1)(src),	.Ll_exc_copy)
+	SUB	len, len, 4*NBYTES
 EXC(	LDREST	t0, REST(0)(src),	.Ll_exc_copy)
 EXC(	LDREST	t1, REST(1)(src),	.Ll_exc_copy)
-EXC(	LDFIRST	t2, FIRST(2)(src),	.Ll_exc_copy)
-EXC(	LDFIRST	t3, FIRST(3)(src),	.Ll_exc_copy)
+EXC(	LDFIRST t2, FIRST(2)(src),	.Ll_exc_copy)
+EXC(	LDFIRST t3, FIRST(3)(src),	.Ll_exc_copy)
 EXC(	LDREST	t2, REST(2)(src),	.Ll_exc_copy)
 EXC(	LDREST	t3, REST(3)(src),	.Ll_exc_copy)
 	ADD	src, src, 4*NBYTES
@@ -634,7 +634,7 @@
 #define SHIFT_INC -8
 #endif
 	move	t2, zero	# partial word
-	li	t3, SHIFT_START	# shift
+	li	t3, SHIFT_START # shift
 /* use .Ll_exc_copy here to return correct sum on fault */
 #define COPY_BYTE(N)			\
 EXC(	lbu	t0, N(src), .Ll_exc_copy);	\
@@ -642,7 +642,7 @@
 EXC(	sb	t0, N(dst), .Ls_exc);	\
 	SLLV	t0, t0, t3;		\
 	addu	t3, SHIFT_INC;		\
-	beqz	len, .Lcopy_bytes_done;	\
+	beqz	len, .Lcopy_bytes_done; \
 	 or	t2, t0
 
 	COPY_BYTE(0)
diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c
index 288f795..44713af 100644
--- a/arch/mips/lib/delay.c
+++ b/arch/mips/lib/delay.c
@@ -36,7 +36,7 @@
  * Division by multiplication: you don't have to worry about
  * loss of precision.
  *
- * Use only for very small delays ( < 1 msec).  Should probably use a
+ * Use only for very small delays ( < 1 msec).	Should probably use a
  * lookup table, really, as the multiplications take much too long with
  * short delays.  This is a "reasonable" implementation, though (and the
  * first constant multiplications gets optimized away if the delay is
diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c
index a99c1d3..32b9f21 100644
--- a/arch/mips/lib/dump_tlb.c
+++ b/arch/mips/lib/dump_tlb.c
@@ -63,7 +63,7 @@
 		tlb_read();
 		BARRIER();
 		pagemask = read_c0_pagemask();
-		entryhi  = read_c0_entryhi();
+		entryhi	 = read_c0_entryhi();
 		entrylo0 = read_c0_entrylo0();
 		entrylo1 = read_c0_entrylo1();
 
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index 65192c0..c5c40da 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -156,15 +156,15 @@
 
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
 #define LDFIRST LOADR
-#define LDREST  LOADL
+#define LDREST	LOADL
 #define STFIRST STORER
-#define STREST  STOREL
+#define STREST	STOREL
 #define SHIFT_DISCARD SLLV
 #else
 #define LDFIRST LOADL
-#define LDREST  LOADR
+#define LDREST	LOADR
 #define STFIRST STOREL
-#define STREST  STORER
+#define STREST	STORER
 #define SHIFT_DISCARD SRLV
 #endif
 
@@ -235,7 +235,7 @@
 	 * src and dst are aligned; need to compute rem
 	 */
 .Lboth_aligned:
-	 SRL	t0, len, LOG_NBYTES+3    # +3 for 8 units/iter
+	 SRL	t0, len, LOG_NBYTES+3	 # +3 for 8 units/iter
 	beqz	t0, .Lcleanup_both_aligned # len < 8*NBYTES
 	 and	rem, len, (8*NBYTES-1)	 # rem = len % (8*NBYTES)
 	PREF(	0, 3*32(src) )
@@ -313,7 +313,7 @@
 	/*
 	 * src and dst are aligned, need to copy rem bytes (rem < NBYTES)
 	 * A loop would do only a byte at a time with possible branch
-	 * mispredicts.  Can't do an explicit LOAD dst,mask,or,STORE
+	 * mispredicts.	 Can't do an explicit LOAD dst,mask,or,STORE
 	 * because can't assume read-access to dst.  Instead, use
 	 * STREST dst, which doesn't require read access to dst.
 	 *
@@ -327,7 +327,7 @@
 	li	bits, 8*NBYTES
 	SLL	rem, len, 3	# rem = number of bits to keep
 EXC(	LOAD	t0, 0(src),		.Ll_exc)
-	SUB	bits, bits, rem	# bits = number of bits to discard
+	SUB	bits, bits, rem # bits = number of bits to discard
 	SHIFT_DISCARD t0, t0, bits
 EXC(	STREST	t0, -1(t1),		.Ls_exc)
 	jr	ra
@@ -343,7 +343,7 @@
 	 * Set match = (src and dst have same alignment)
 	 */
 #define match rem
-EXC(	LDFIRST	t3, FIRST(0)(src),	.Ll_exc)
+EXC(	LDFIRST t3, FIRST(0)(src),	.Ll_exc)
 	ADD	t2, zero, NBYTES
 EXC(	LDREST	t3, REST(0)(src),	.Ll_exc_copy)
 	SUB	t2, t2, t1	# t2 = number of bytes copied
@@ -357,10 +357,10 @@
 	 ADD	src, src, t2
 
 .Lsrc_unaligned_dst_aligned:
-	SRL	t0, len, LOG_NBYTES+2    # +2 for 4 units/iter
+	SRL	t0, len, LOG_NBYTES+2	 # +2 for 4 units/iter
 	PREF(	0, 3*32(src) )
 	beqz	t0, .Lcleanup_src_unaligned
-	 and	rem, len, (4*NBYTES-1)   # rem = len % 4*NBYTES
+	 and	rem, len, (4*NBYTES-1)	 # rem = len % 4*NBYTES
 	PREF(	1, 3*32(dst) )
 1:
 /*
@@ -370,13 +370,13 @@
  * are to the same unit (unless src is aligned, but it's not).
  */
 	R10KCBARRIER(0(ra))
-EXC(	LDFIRST	t0, FIRST(0)(src),	.Ll_exc)
-EXC(	LDFIRST	t1, FIRST(1)(src),	.Ll_exc_copy)
-	SUB     len, len, 4*NBYTES
+EXC(	LDFIRST t0, FIRST(0)(src),	.Ll_exc)
+EXC(	LDFIRST t1, FIRST(1)(src),	.Ll_exc_copy)
+	SUB	len, len, 4*NBYTES
 EXC(	LDREST	t0, REST(0)(src),	.Ll_exc_copy)
 EXC(	LDREST	t1, REST(1)(src),	.Ll_exc_copy)
-EXC(	LDFIRST	t2, FIRST(2)(src),	.Ll_exc_copy)
-EXC(	LDFIRST	t3, FIRST(3)(src),	.Ll_exc_copy)
+EXC(	LDFIRST t2, FIRST(2)(src),	.Ll_exc_copy)
+EXC(	LDFIRST t3, FIRST(3)(src),	.Ll_exc_copy)
 EXC(	LDREST	t2, REST(2)(src),	.Ll_exc_copy)
 EXC(	LDREST	t3, REST(3)(src),	.Ll_exc_copy)
 	PREF(	0, 9*32(src) )		# 0 is PREF_LOAD  (not streamed)
@@ -388,7 +388,7 @@
 EXC(	STORE	t1, UNIT(1)(dst),	.Ls_exc_p3u)
 EXC(	STORE	t2, UNIT(2)(dst),	.Ls_exc_p2u)
 EXC(	STORE	t3, UNIT(3)(dst),	.Ls_exc_p1u)
-	PREF(	1, 9*32(dst) )     	# 1 is PREF_STORE (not streamed)
+	PREF(	1, 9*32(dst) )		# 1 is PREF_STORE (not streamed)
 	.set	reorder				/* DADDI_WAR */
 	ADD	dst, dst, 4*NBYTES
 	bne	len, rem, 1b
@@ -502,7 +502,7 @@
 
 
 #define SEXC(n)							\
-	.set	reorder;			/* DADDI_WAR */	\
+	.set	reorder;			/* DADDI_WAR */ \
 .Ls_exc_p ## n ## u:						\
 	ADD	len, len, n*NBYTES;				\
 	jr	ra;						\
diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S
index 606c8a9..053d3b0 100644
--- a/arch/mips/lib/memset.S
+++ b/arch/mips/lib/memset.S
@@ -21,8 +21,8 @@
 
 #define EX(insn,reg,addr,handler)			\
 9:	insn	reg, addr;				\
-	.section __ex_table,"a"; 			\
-	PTR	9b, handler; 				\
+	.section __ex_table,"a";			\
+	PTR	9b, handler;				\
 	.previous
 
 	.macro	f_fill64 dst, offset, val, fixup
diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c
index 9cee907..91615c2 100644
--- a/arch/mips/lib/r3k_dump_tlb.c
+++ b/arch/mips/lib/r3k_dump_tlb.c
@@ -30,7 +30,7 @@
 			"tlbr\n\t"
 			"nop\n\t"
 			".set\treorder");
-		entryhi  = read_c0_entryhi();
+		entryhi	 = read_c0_entryhi();
 		entrylo0 = read_c0_entrylo0();
 
 		/* Unused entries have a virtual address of KSEG0.  */
diff --git a/arch/mips/lib/strncpy_user.S b/arch/mips/lib/strncpy_user.S
index 7201b2f..bad5394 100644
--- a/arch/mips/lib/strncpy_user.S
+++ b/arch/mips/lib/strncpy_user.S
@@ -23,7 +23,7 @@
 
 /*
  * Ugly special case have to check: we might get passed a user space
- * pointer which wraps into the kernel space.  We don't deal with that.  If
+ * pointer which wraps into the kernel space.  We don't deal with that.	 If
  * it happens at most some bytes of the exceptions handlers will be copied.
  */
 
diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S
index 6445716..beea03c 100644
--- a/arch/mips/lib/strnlen_user.S
+++ b/arch/mips/lib/strnlen_user.S
@@ -21,9 +21,9 @@
  * maximum of a1 or 0 in case of error.
  *
  * Note: for performance reasons we deliberately accept that a user may
- *       make strlen_user and strnlen_user access the first few KSEG0
- *       bytes.  There's nothing secret there.  On 64-bit accessing beyond
- *       the maximum is a tad hairier ...
+ *	 make strlen_user and strnlen_user access the first few KSEG0
+ *	 bytes.	 There's nothing secret there.	On 64-bit accessing beyond
+ *	 the maximum is a tad hairier ...
  */
 LEAF(__strnlen_user_asm)
 	LONG_L		v0, TI_ADDR_LIMIT($28)	# pointer ok?
diff --git a/arch/mips/lib/uncached.c b/arch/mips/lib/uncached.c
index a6d1c77..65e3dfc 100644
--- a/arch/mips/lib/uncached.c
+++ b/arch/mips/lib/uncached.c
@@ -4,7 +4,7 @@
  * for more details.
  *
  * Copyright (C) 2005 Thiemo Seufer
- * Copyright (C) 2005  MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2005  MIPS Technologies, Inc.	All rights reserved.
  *	Author: Maciej W. Rozycki <macro@mips.com>
  */
 
diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile
index 2b76cb0..0dc0055 100644
--- a/arch/mips/loongson/Makefile
+++ b/arch/mips/loongson/Makefile
@@ -8,7 +8,7 @@
 # Lemote Fuloong mini-PC (Loongson 2E-based)
 #
 
-obj-$(CONFIG_LEMOTE_FULOONG2E)  += fuloong-2e/
+obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fuloong-2e/
 
 #
 # Lemote loongson2f family machines
diff --git a/arch/mips/loongson/common/bonito-irq.c b/arch/mips/loongson/common/bonito-irq.c
index f27d7cc..cc0e4fd 100644
--- a/arch/mips/loongson/common/bonito-irq.c
+++ b/arch/mips/loongson/common/bonito-irq.c
@@ -6,9 +6,9 @@
  * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
  *  option) any later version.
  */
 #include <linux/interrupt.h>
diff --git a/arch/mips/loongson/common/cmdline.c b/arch/mips/loongson/common/cmdline.c
index 353e1d2..72fed00 100644
--- a/arch/mips/loongson/common/cmdline.c
+++ b/arch/mips/loongson/common/cmdline.c
@@ -12,8 +12,8 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson/common/cs5536/cs5536_acc.c b/arch/mips/loongson/common/cs5536/cs5536_acc.c
index b3fd5ea..ab4d6cc 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_acc.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_acc.c
@@ -7,8 +7,8 @@
  * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
index 5b5cbba6..ec2e360 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ehci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
@@ -7,8 +7,8 @@
  * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ide.c b/arch/mips/loongson/common/cs5536/cs5536_ide.c
index 681d129..a73414d 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ide.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ide.c
@@ -7,8 +7,8 @@
  * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson/common/cs5536/cs5536_isa.c b/arch/mips/loongson/common/cs5536/cs5536_isa.c
index 4d9f65a..a6eb2e8 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_isa.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_isa.c
@@ -7,8 +7,8 @@
  * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
index 5d1f48f..c639b9d 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
@@ -9,9 +9,9 @@
  *
  * Reference: AMD Geode(TM) CS5536 Companion Device Data Book
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
  *  option) any later version.
  */
 
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
index bdedf51..f7c905e 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ohci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
@@ -7,8 +7,8 @@
  * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson/common/cs5536/cs5536_pci.c b/arch/mips/loongson/common/cs5536/cs5536_pci.c
index 6dfeab1..81bed9d 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_pci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_pci.c
@@ -7,8 +7,8 @@
  * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  *
diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c
index a71736f..ced461b 100644
--- a/arch/mips/loongson/common/early_printk.c
+++ b/arch/mips/loongson/common/early_printk.c
@@ -4,9 +4,9 @@
  *  Copyright (c) 2009 Lemote Inc.
  *  Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
  *  option) any later version.
  */
 #include <linux/serial_reg.h>
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
index d93830a..0a18fcf 100644
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@@ -12,8 +12,8 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson/common/gpio.c b/arch/mips/loongson/common/gpio.c
index e8a0ffa..2186990 100644
--- a/arch/mips/loongson/common/gpio.c
+++ b/arch/mips/loongson/common/gpio.c
@@ -1,7 +1,7 @@
 /*
  *  STLS2F GPIO Support
  *
- *  Copyright (c) 2008 Richard Liu,  STMicroelectronics  <richard.liu@st.com>
+ *  Copyright (c) 2008 Richard Liu,  STMicroelectronics	 <richard.liu@st.com>
  *  Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -123,13 +123,13 @@
 }
 
 static struct gpio_chip ls2f_chip = {
-	.label                  = "ls2f",
-	.direction_input        = ls2f_gpio_direction_input,
-	.get                    = ls2f_gpio_get_value,
-	.direction_output       = ls2f_gpio_direction_output,
-	.set                    = ls2f_gpio_set_value,
-	.base                   = 0,
-	.ngpio                  = STLS2F_N_GPIO,
+	.label			= "ls2f",
+	.direction_input	= ls2f_gpio_direction_input,
+	.get			= ls2f_gpio_get_value,
+	.direction_output	= ls2f_gpio_direction_output,
+	.set			= ls2f_gpio_set_value,
+	.base			= 0,
+	.ngpio			= STLS2F_N_GPIO,
 };
 
 static int __init ls2f_gpio_setup(void)
diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c
index 19d3415..ae7af1f 100644
--- a/arch/mips/loongson/common/init.c
+++ b/arch/mips/loongson/common/init.c
@@ -2,8 +2,8 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson/common/irq.c
index 5897471..687003b 100644
--- a/arch/mips/loongson/common/irq.c
+++ b/arch/mips/loongson/common/irq.c
@@ -2,9 +2,9 @@
  * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
  *  option) any later version.
  */
 #include <linux/delay.h>
diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c
index 2efd5d9..4becd4f 100644
--- a/arch/mips/loongson/common/machtype.c
+++ b/arch/mips/loongson/common/machtype.c
@@ -4,8 +4,8 @@
  *
  * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -19,15 +19,15 @@
 #define MACHTYPE_LEN 50
 
 static const char *system_types[] = {
-	[MACH_LOONGSON_UNKNOWN]         "unknown loongson machine",
-	[MACH_LEMOTE_FL2E]              "lemote-fuloong-2e-box",
-	[MACH_LEMOTE_FL2F]              "lemote-fuloong-2f-box",
-	[MACH_LEMOTE_ML2F7]             "lemote-mengloong-2f-7inches",
-	[MACH_LEMOTE_YL2F89]            "lemote-yeeloong-2f-8.9inches",
-	[MACH_DEXXON_GDIUM2F10]         "dexxon-gdium-2f",
+	[MACH_LOONGSON_UNKNOWN]		"unknown loongson machine",
+	[MACH_LEMOTE_FL2E]		"lemote-fuloong-2e-box",
+	[MACH_LEMOTE_FL2F]		"lemote-fuloong-2f-box",
+	[MACH_LEMOTE_ML2F7]		"lemote-mengloong-2f-7inches",
+	[MACH_LEMOTE_YL2F89]		"lemote-yeeloong-2f-8.9inches",
+	[MACH_DEXXON_GDIUM2F10]		"dexxon-gdium-2f",
 	[MACH_LEMOTE_NAS]		"lemote-nas-2f",
-	[MACH_LEMOTE_LL2F]              "lemote-lynloong-2f",
-	[MACH_LOONGSON_END]             NULL,
+	[MACH_LEMOTE_LL2F]		"lemote-lynloong-2f",
+	[MACH_LOONGSON_END]		NULL,
 };
 
 const char *get_system_type(void)
diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c
index 30eba60..8626a42 100644
--- a/arch/mips/loongson/common/mem.c
+++ b/arch/mips/loongson/common/mem.c
@@ -1,6 +1,6 @@
 /*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c
index 31d8c5ec..fa77844 100644
--- a/arch/mips/loongson/common/pci.c
+++ b/arch/mips/loongson/common/pci.c
@@ -2,9 +2,9 @@
  * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
  *  option) any later version.
  */
 #include <linux/pci.h>
@@ -13,25 +13,25 @@
 #include <loongson.h>
 
 static struct resource loongson_pci_mem_resource = {
-	.name   = "pci memory space",
-	.start  = LOONGSON_PCI_MEM_START,
-	.end    = LOONGSON_PCI_MEM_END,
-	.flags  = IORESOURCE_MEM,
+	.name	= "pci memory space",
+	.start	= LOONGSON_PCI_MEM_START,
+	.end	= LOONGSON_PCI_MEM_END,
+	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource loongson_pci_io_resource = {
-	.name   = "pci io space",
-	.start  = LOONGSON_PCI_IO_START,
-	.end    = IO_SPACE_LIMIT,
-	.flags  = IORESOURCE_IO,
+	.name	= "pci io space",
+	.start	= LOONGSON_PCI_IO_START,
+	.end	= IO_SPACE_LIMIT,
+	.flags	= IORESOURCE_IO,
 };
 
 static struct pci_controller  loongson_pci_controller = {
-	.pci_ops        = &loongson_pci_ops,
-	.io_resource    = &loongson_pci_io_resource,
-	.mem_resource   = &loongson_pci_mem_resource,
-	.mem_offset     = 0x00000000UL,
-	.io_offset      = 0x00000000UL,
+	.pci_ops	= &loongson_pci_ops,
+	.io_resource	= &loongson_pci_io_resource,
+	.mem_resource	= &loongson_pci_mem_resource,
+	.mem_offset	= 0x00000000UL,
+	.io_offset	= 0x00000000UL,
 };
 
 static void __init setup_pcimap(void)
@@ -42,7 +42,7 @@
 	 * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M]
 	 *
 	 * pcimap: PCI_MAP2  PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
-	 * 	     [<2G]   [384M,448M] [320M,384M] [0M,64M]
+	 *	     [<2G]   [384M,448M] [320M,384M] [0M,64M]
 	 */
 	LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 |
 		LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) |
diff --git a/arch/mips/loongson/common/platform.c b/arch/mips/loongson/common/platform.c
index 502b059..0ed3832 100644
--- a/arch/mips/loongson/common/platform.c
+++ b/arch/mips/loongson/common/platform.c
@@ -2,8 +2,8 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c
index 9e10d62..35c8c64 100644
--- a/arch/mips/loongson/common/reset.c
+++ b/arch/mips/loongson/common/reset.c
@@ -1,6 +1,6 @@
 /*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  *
@@ -26,9 +26,9 @@
 	func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4);
 
 	__asm__ __volatile__(
-	"       .set    noat                                            \n"
-	"       jr      %[func]                                         \n"
-	"       .set    at                                              \n"
+	"	.set	noat						\n"
+	"	jr	%[func]						\n"
+	"	.set	at						\n"
 	: /* No outputs */
 	: [func] "r" (func));
 #endif
diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c
index 7580873..5f2b78a 100644
--- a/arch/mips/loongson/common/serial.c
+++ b/arch/mips/loongson/common/serial.c
@@ -39,15 +39,15 @@
 }
 
 static struct plat_serial8250_port uart8250_data[][2] = {
-	[MACH_LOONGSON_UNKNOWN]         {},
-	[MACH_LEMOTE_FL2E]              {PORT(4), {} },
-	[MACH_LEMOTE_FL2F]              {PORT(3), {} },
-	[MACH_LEMOTE_ML2F7]             {PORT_M(3), {} },
-	[MACH_LEMOTE_YL2F89]            {PORT_M(3), {} },
-	[MACH_DEXXON_GDIUM2F10]         {PORT_M(3), {} },
-	[MACH_LEMOTE_NAS]               {PORT_M(3), {} },
-	[MACH_LEMOTE_LL2F]              {PORT(3), {} },
-	[MACH_LOONGSON_END]             {},
+	[MACH_LOONGSON_UNKNOWN]		{},
+	[MACH_LEMOTE_FL2E]		{PORT(4), {} },
+	[MACH_LEMOTE_FL2F]		{PORT(3), {} },
+	[MACH_LEMOTE_ML2F7]		{PORT_M(3), {} },
+	[MACH_LEMOTE_YL2F89]		{PORT_M(3), {} },
+	[MACH_DEXXON_GDIUM2F10]		{PORT_M(3), {} },
+	[MACH_LEMOTE_NAS]		{PORT_M(3), {} },
+	[MACH_LEMOTE_LL2F]		{PORT(3), {} },
+	[MACH_LOONGSON_END]		{},
 };
 
 static struct platform_device uart8250_device = {
diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c
index 27d826b..8223f8a 100644
--- a/arch/mips/loongson/common/setup.c
+++ b/arch/mips/loongson/common/setup.c
@@ -2,9 +2,9 @@
  * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
  *  option) any later version.
  */
 #include <linux/module.h>
diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c
index 9fdd01f..262a1f6 100644
--- a/arch/mips/loongson/common/time.c
+++ b/arch/mips/loongson/common/time.c
@@ -5,9 +5,9 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
  *  option) any later version.
  */
 #include <asm/mc146818-time.h>
diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c
index d69ea54..e192ad0 100644
--- a/arch/mips/loongson/common/uart_base.c
+++ b/arch/mips/loongson/common/uart_base.c
@@ -2,8 +2,8 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c
index 3cf1fef..ef5ec8f 100644
--- a/arch/mips/loongson/fuloong-2e/irq.c
+++ b/arch/mips/loongson/fuloong-2e/irq.c
@@ -2,9 +2,9 @@
  * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
  *  option) any later version.
  */
 #include <linux/interrupt.h>
@@ -48,9 +48,9 @@
 void __init mach_init_irq(void)
 {
 	/* init all controller
-	 *   0-15         ------> i8259 interrupt
-	 *   16-23        ------> mips cpu interrupt
-	 *   32-63        ------> bonito irq
+	 *   0-15	  ------> i8259 interrupt
+	 *   16-23	  ------> mips cpu interrupt
+	 *   32-63	  ------> bonito irq
 	 */
 
 	/* most bonito irq should be level triggered */
diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson/fuloong-2e/reset.c
index bc39ec6..da4d2ae 100644
--- a/arch/mips/loongson/fuloong-2e/reset.c
+++ b/arch/mips/loongson/fuloong-2e/reset.c
@@ -4,8 +4,8 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/arch/mips/loongson/lemote-2f/ec_kb3310b.h
index 1595a21..5a3f186 100644
--- a/arch/mips/loongson/lemote-2f/ec_kb3310b.h
+++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.h
@@ -30,141 +30,141 @@
  * 2, fill the PORT_LOW as EC register low part.
  * 3, fill the PORT_DATA as EC register write data or get the data from it.
  */
-#define	EC_IO_PORT_HIGH	0x0381
-#define	EC_IO_PORT_LOW	0x0382
-#define	EC_IO_PORT_DATA	0x0383
+#define EC_IO_PORT_HIGH 0x0381
+#define EC_IO_PORT_LOW	0x0382
+#define EC_IO_PORT_DATA 0x0383
 
 /*
  * EC delay time is 500us for register and status access
  */
-#define	EC_REG_DELAY	500	/* unit : us */
-#define	EC_CMD_TIMEOUT	0x1000
+#define EC_REG_DELAY	500	/* unit : us */
+#define EC_CMD_TIMEOUT	0x1000
 
 /*
  * EC access port for SCI communication
  */
-#define	EC_CMD_PORT		0x66
-#define	EC_STS_PORT		0x66
-#define	EC_DAT_PORT		0x62
-#define	CMD_INIT_IDLE_MODE	0xdd
-#define	CMD_EXIT_IDLE_MODE	0xdf
-#define	CMD_INIT_RESET_MODE	0xd8
-#define	CMD_REBOOT_SYSTEM	0x8c
-#define	CMD_GET_EVENT_NUM	0x84
-#define	CMD_PROGRAM_PIECE	0xda
+#define EC_CMD_PORT		0x66
+#define EC_STS_PORT		0x66
+#define EC_DAT_PORT		0x62
+#define CMD_INIT_IDLE_MODE	0xdd
+#define CMD_EXIT_IDLE_MODE	0xdf
+#define CMD_INIT_RESET_MODE	0xd8
+#define CMD_REBOOT_SYSTEM	0x8c
+#define CMD_GET_EVENT_NUM	0x84
+#define CMD_PROGRAM_PIECE	0xda
 
 /* temperature & fan registers */
-#define	REG_TEMPERATURE_VALUE	0xF458
-#define	REG_FAN_AUTO_MAN_SWITCH 0xF459
-#define	BIT_FAN_AUTO		0
-#define	BIT_FAN_MANUAL		1
-#define	REG_FAN_CONTROL		0xF4D2
-#define	BIT_FAN_CONTROL_ON	(1 << 0)
-#define	BIT_FAN_CONTROL_OFF	(0 << 0)
-#define	REG_FAN_STATUS		0xF4DA
-#define	BIT_FAN_STATUS_ON	(1 << 0)
-#define	BIT_FAN_STATUS_OFF	(0 << 0)
-#define	REG_FAN_SPEED_HIGH	0xFE22
-#define	REG_FAN_SPEED_LOW	0xFE23
-#define	REG_FAN_SPEED_LEVEL	0xF4CC
+#define REG_TEMPERATURE_VALUE	0xF458
+#define REG_FAN_AUTO_MAN_SWITCH 0xF459
+#define BIT_FAN_AUTO		0
+#define BIT_FAN_MANUAL		1
+#define REG_FAN_CONTROL		0xF4D2
+#define BIT_FAN_CONTROL_ON	(1 << 0)
+#define BIT_FAN_CONTROL_OFF	(0 << 0)
+#define REG_FAN_STATUS		0xF4DA
+#define BIT_FAN_STATUS_ON	(1 << 0)
+#define BIT_FAN_STATUS_OFF	(0 << 0)
+#define REG_FAN_SPEED_HIGH	0xFE22
+#define REG_FAN_SPEED_LOW	0xFE23
+#define REG_FAN_SPEED_LEVEL	0xF4CC
 /* fan speed divider */
-#define	FAN_SPEED_DIVIDER	480000	/* (60*1000*1000/62.5/2)*/
+#define FAN_SPEED_DIVIDER	480000	/* (60*1000*1000/62.5/2)*/
 
 /* battery registers */
-#define	REG_BAT_DESIGN_CAP_HIGH		0xF77D
-#define	REG_BAT_DESIGN_CAP_LOW		0xF77E
-#define	REG_BAT_FULLCHG_CAP_HIGH	0xF780
-#define	REG_BAT_FULLCHG_CAP_LOW		0xF781
-#define	REG_BAT_DESIGN_VOL_HIGH		0xF782
-#define	REG_BAT_DESIGN_VOL_LOW		0xF783
-#define	REG_BAT_CURRENT_HIGH		0xF784
-#define	REG_BAT_CURRENT_LOW		0xF785
-#define	REG_BAT_VOLTAGE_HIGH		0xF786
-#define	REG_BAT_VOLTAGE_LOW		0xF787
-#define	REG_BAT_TEMPERATURE_HIGH	0xF788
-#define	REG_BAT_TEMPERATURE_LOW		0xF789
-#define	REG_BAT_RELATIVE_CAP_HIGH	0xF492
-#define	REG_BAT_RELATIVE_CAP_LOW	0xF493
-#define	REG_BAT_VENDOR			0xF4C4
-#define	FLAG_BAT_VENDOR_SANYO		0x01
-#define	FLAG_BAT_VENDOR_SIMPLO		0x02
-#define	REG_BAT_CELL_COUNT		0xF4C6
-#define	FLAG_BAT_CELL_3S1P		0x03
-#define	FLAG_BAT_CELL_3S2P		0x06
-#define	REG_BAT_CHARGE			0xF4A2
-#define	FLAG_BAT_CHARGE_DISCHARGE	0x01
-#define	FLAG_BAT_CHARGE_CHARGE		0x02
-#define	FLAG_BAT_CHARGE_ACPOWER		0x00
-#define	REG_BAT_STATUS			0xF4B0
-#define	BIT_BAT_STATUS_LOW		(1 << 5)
-#define	BIT_BAT_STATUS_DESTROY		(1 << 2)
-#define	BIT_BAT_STATUS_FULL		(1 << 1)
-#define	BIT_BAT_STATUS_IN		(1 << 0)
-#define	REG_BAT_CHARGE_STATUS		0xF4B1
-#define	BIT_BAT_CHARGE_STATUS_OVERTEMP	(1 << 2)
-#define	BIT_BAT_CHARGE_STATUS_PRECHG	(1 << 1)
-#define	REG_BAT_STATE			0xF482
-#define	BIT_BAT_STATE_CHARGING		(1 << 1)
-#define	BIT_BAT_STATE_DISCHARGING	(1 << 0)
-#define	REG_BAT_POWER			0xF440
-#define	BIT_BAT_POWER_S3		(1 << 2)
-#define	BIT_BAT_POWER_ON		(1 << 1)
-#define	BIT_BAT_POWER_ACIN		(1 << 0)
+#define REG_BAT_DESIGN_CAP_HIGH		0xF77D
+#define REG_BAT_DESIGN_CAP_LOW		0xF77E
+#define REG_BAT_FULLCHG_CAP_HIGH	0xF780
+#define REG_BAT_FULLCHG_CAP_LOW		0xF781
+#define REG_BAT_DESIGN_VOL_HIGH		0xF782
+#define REG_BAT_DESIGN_VOL_LOW		0xF783
+#define REG_BAT_CURRENT_HIGH		0xF784
+#define REG_BAT_CURRENT_LOW		0xF785
+#define REG_BAT_VOLTAGE_HIGH		0xF786
+#define REG_BAT_VOLTAGE_LOW		0xF787
+#define REG_BAT_TEMPERATURE_HIGH	0xF788
+#define REG_BAT_TEMPERATURE_LOW		0xF789
+#define REG_BAT_RELATIVE_CAP_HIGH	0xF492
+#define REG_BAT_RELATIVE_CAP_LOW	0xF493
+#define REG_BAT_VENDOR			0xF4C4
+#define FLAG_BAT_VENDOR_SANYO		0x01
+#define FLAG_BAT_VENDOR_SIMPLO		0x02
+#define REG_BAT_CELL_COUNT		0xF4C6
+#define FLAG_BAT_CELL_3S1P		0x03
+#define FLAG_BAT_CELL_3S2P		0x06
+#define REG_BAT_CHARGE			0xF4A2
+#define FLAG_BAT_CHARGE_DISCHARGE	0x01
+#define FLAG_BAT_CHARGE_CHARGE		0x02
+#define FLAG_BAT_CHARGE_ACPOWER		0x00
+#define REG_BAT_STATUS			0xF4B0
+#define BIT_BAT_STATUS_LOW		(1 << 5)
+#define BIT_BAT_STATUS_DESTROY		(1 << 2)
+#define BIT_BAT_STATUS_FULL		(1 << 1)
+#define BIT_BAT_STATUS_IN		(1 << 0)
+#define REG_BAT_CHARGE_STATUS		0xF4B1
+#define BIT_BAT_CHARGE_STATUS_OVERTEMP	(1 << 2)
+#define BIT_BAT_CHARGE_STATUS_PRECHG	(1 << 1)
+#define REG_BAT_STATE			0xF482
+#define BIT_BAT_STATE_CHARGING		(1 << 1)
+#define BIT_BAT_STATE_DISCHARGING	(1 << 0)
+#define REG_BAT_POWER			0xF440
+#define BIT_BAT_POWER_S3		(1 << 2)
+#define BIT_BAT_POWER_ON		(1 << 1)
+#define BIT_BAT_POWER_ACIN		(1 << 0)
 
 /* other registers */
 /* Audio: rd/wr */
-#define	REG_AUDIO_VOLUME	0xF46C
-#define	REG_AUDIO_MUTE		0xF4E7
-#define	REG_AUDIO_BEEP		0xF4D0
+#define REG_AUDIO_VOLUME	0xF46C
+#define REG_AUDIO_MUTE		0xF4E7
+#define REG_AUDIO_BEEP		0xF4D0
 /* USB port power or not: rd/wr */
-#define	REG_USB0_FLAG		0xF461
-#define	REG_USB1_FLAG		0xF462
-#define	REG_USB2_FLAG		0xF463
-#define	BIT_USB_FLAG_ON		1
-#define	BIT_USB_FLAG_OFF	0
+#define REG_USB0_FLAG		0xF461
+#define REG_USB1_FLAG		0xF462
+#define REG_USB2_FLAG		0xF463
+#define BIT_USB_FLAG_ON		1
+#define BIT_USB_FLAG_OFF	0
 /* LID */
-#define	REG_LID_DETECT		0xF4BD
-#define	BIT_LID_DETECT_ON	1
-#define	BIT_LID_DETECT_OFF	0
+#define REG_LID_DETECT		0xF4BD
+#define BIT_LID_DETECT_ON	1
+#define BIT_LID_DETECT_OFF	0
 /* CRT */
-#define	REG_CRT_DETECT		0xF4AD
-#define	BIT_CRT_DETECT_PLUG	1
-#define	BIT_CRT_DETECT_UNPLUG	0
+#define REG_CRT_DETECT		0xF4AD
+#define BIT_CRT_DETECT_PLUG	1
+#define BIT_CRT_DETECT_UNPLUG	0
 /* LCD backlight brightness adjust: 9 levels */
-#define	REG_DISPLAY_BRIGHTNESS	0xF4F5
+#define REG_DISPLAY_BRIGHTNESS	0xF4F5
 /* Black screen Status */
-#define	BIT_DISPLAY_LCD_ON	1
-#define	BIT_DISPLAY_LCD_OFF	0
+#define BIT_DISPLAY_LCD_ON	1
+#define BIT_DISPLAY_LCD_OFF	0
 /* LCD backlight control: off/restore */
-#define	REG_BACKLIGHT_CTRL	0xF7BD
-#define	BIT_BACKLIGHT_ON	1
-#define	BIT_BACKLIGHT_OFF	0
+#define REG_BACKLIGHT_CTRL	0xF7BD
+#define BIT_BACKLIGHT_ON	1
+#define BIT_BACKLIGHT_OFF	0
 /* Reset the machine auto-clear: rd/wr */
-#define	REG_RESET		0xF4EC
-#define	BIT_RESET_ON		1
+#define REG_RESET		0xF4EC
+#define BIT_RESET_ON		1
 /* Light the led: rd/wr */
-#define	REG_LED			0xF4C8
-#define	BIT_LED_RED_POWER	(1 << 0)
-#define	BIT_LED_ORANGE_POWER	(1 << 1)
-#define	BIT_LED_GREEN_CHARGE	(1 << 2)
-#define	BIT_LED_RED_CHARGE	(1 << 3)
-#define	BIT_LED_NUMLOCK		(1 << 4)
+#define REG_LED			0xF4C8
+#define BIT_LED_RED_POWER	(1 << 0)
+#define BIT_LED_ORANGE_POWER	(1 << 1)
+#define BIT_LED_GREEN_CHARGE	(1 << 2)
+#define BIT_LED_RED_CHARGE	(1 << 3)
+#define BIT_LED_NUMLOCK		(1 << 4)
 /* Test led mode, all led on/off */
-#define	REG_LED_TEST		0xF4C2
-#define	BIT_LED_TEST_IN		1
-#define	BIT_LED_TEST_OUT	0
+#define REG_LED_TEST		0xF4C2
+#define BIT_LED_TEST_IN		1
+#define BIT_LED_TEST_OUT	0
 /* Camera on/off */
-#define	REG_CAMERA_STATUS	0xF46A
-#define	BIT_CAMERA_STATUS_ON	1
-#define	BIT_CAMERA_STATUS_OFF	0
-#define	REG_CAMERA_CONTROL	0xF7B7
-#define	BIT_CAMERA_CONTROL_OFF	0
-#define	BIT_CAMERA_CONTROL_ON	1
+#define REG_CAMERA_STATUS	0xF46A
+#define BIT_CAMERA_STATUS_ON	1
+#define BIT_CAMERA_STATUS_OFF	0
+#define REG_CAMERA_CONTROL	0xF7B7
+#define BIT_CAMERA_CONTROL_OFF	0
+#define BIT_CAMERA_CONTROL_ON	1
 /* Wlan Status */
-#define	REG_WLAN		0xF4FA
-#define	BIT_WLAN_ON		1
-#define	BIT_WLAN_OFF		0
-#define	REG_DISPLAY_LCD		0xF79F
+#define REG_WLAN		0xF4FA
+#define BIT_WLAN_ON		1
+#define BIT_WLAN_OFF		0
+#define REG_DISPLAY_LCD		0xF79F
 
 /* SCI Event Number from EC */
 enum {
diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c
index 14b0818..6f8682e 100644
--- a/arch/mips/loongson/lemote-2f/irq.c
+++ b/arch/mips/loongson/lemote-2f/irq.c
@@ -2,9 +2,9 @@
  * Copyright (C) 2007 Lemote Inc.
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
  *  option) any later version.
  */
 
@@ -18,10 +18,10 @@
 #include <loongson.h>
 #include <machine.h>
 
-#define LOONGSON_TIMER_IRQ	(MIPS_CPU_IRQ_BASE + 7)	/* cpu timer */
-#define LOONGSON_NORTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 6)	/* bonito */
-#define LOONGSON_UART_IRQ	(MIPS_CPU_IRQ_BASE + 3)	/* cpu serial port */
-#define LOONGSON_SOUTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 2)	/* i8259 */
+#define LOONGSON_TIMER_IRQ	(MIPS_CPU_IRQ_BASE + 7) /* cpu timer */
+#define LOONGSON_NORTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 6) /* bonito */
+#define LOONGSON_UART_IRQ	(MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */
+#define LOONGSON_SOUTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 2) /* i8259 */
 
 #define LOONGSON_INT_BIT_INT0		(1 << 11)
 #define LOONGSON_INT_BIT_INT1		(1 << 12)
@@ -108,9 +108,9 @@
 void __init mach_init_irq(void)
 {
 	/* init all controller
-	 *   0-15         ------> i8259 interrupt
-	 *   16-23        ------> mips cpu interrupt
-	 *   32-63        ------> bonito irq
+	 *   0-15	  ------> i8259 interrupt
+	 *   16-23	  ------> mips cpu interrupt
+	 *   32-63	  ------> bonito irq
 	 */
 
 	/* setup cs5536 as high level trigger */
diff --git a/arch/mips/loongson/lemote-2f/machtype.c b/arch/mips/loongson/lemote-2f/machtype.c
index e860a27..b55e6ee 100644
--- a/arch/mips/loongson/lemote-2f/machtype.c
+++ b/arch/mips/loongson/lemote-2f/machtype.c
@@ -2,8 +2,8 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -22,11 +22,11 @@
 	 * machines, this will help the users a lot.
 	 *
 	 * If no "machtype=" passed, get machine type from "PMON_VER=".
-	 * 	PMON_VER=LM8089		Lemote 8.9'' netbook
-	 * 	         LM8101		Lemote 10.1'' netbook
-	 * 	(The above two netbooks have the same kernel support)
-	 *	         LM6XXX		Lemote FuLoong(2F) box series
-	 *	         LM9XXX		Lemote LynLoong PC series
+	 *	PMON_VER=LM8089		Lemote 8.9'' netbook
+	 *		 LM8101		Lemote 10.1'' netbook
+	 *	(The above two netbooks have the same kernel support)
+	 *		 LM6XXX		Lemote FuLoong(2F) box series
+	 *		 LM9XXX		Lemote LynLoong PC series
 	 */
 	if (strstr(arcs_cmdline, "PMON_VER=LM")) {
 		if (strstr(arcs_cmdline, "PMON_VER=LM8"))
diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c
index 36020a0..90962a3 100644
--- a/arch/mips/loongson/lemote-2f/reset.c
+++ b/arch/mips/loongson/lemote-2f/reset.c
@@ -5,8 +5,8 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -90,9 +90,9 @@
 #define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d
 #define EC_SHUTDOWN_IO_PORT_LOW	 0xff2e
 #define EC_SHUTDOWN_IO_PORT_DATA 0xff2f
-#define REG_SHUTDOWN_HIGH        0xFC
-#define REG_SHUTDOWN_LOW         0x29
-#define BIT_SHUTDOWN_ON          (1 << 1)
+#define REG_SHUTDOWN_HIGH	 0xFC
+#define REG_SHUTDOWN_LOW	 0x29
+#define BIT_SHUTDOWN_ON		 (1 << 1)
 
 static void ml2f_shutdown(void)
 {
diff --git a/arch/mips/loongson1/Platform b/arch/mips/loongson1/Platform
index 99bdefe..1186344 100644
--- a/arch/mips/loongson1/Platform
+++ b/arch/mips/loongson1/Platform
@@ -1,4 +1,4 @@
-cflags-$(CONFIG_CPU_LOONGSON1)  += \
+cflags-$(CONFIG_CPU_LOONGSON1)	+= \
 	$(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 	-Wa,-mips32r2 -Wa,--trap
 
diff --git a/arch/mips/loongson1/common/clock.c b/arch/mips/loongson1/common/clock.c
index 07133de..b4437f1 100644
--- a/arch/mips/loongson1/common/clock.c
+++ b/arch/mips/loongson1/common/clock.c
@@ -1,8 +1,8 @@
 /*
  * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson1/common/irq.c b/arch/mips/loongson1/common/irq.c
index 41bc8ff..455a770 100644
--- a/arch/mips/loongson1/common/irq.c
+++ b/arch/mips/loongson1/common/irq.c
@@ -1,8 +1,8 @@
 /*
  * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson1/common/platform.c b/arch/mips/loongson1/common/platform.c
index 69dad4c..fdf8cb5 100644
--- a/arch/mips/loongson1/common/platform.c
+++ b/arch/mips/loongson1/common/platform.c
@@ -1,8 +1,8 @@
 /*
  * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -23,7 +23,7 @@
 		.mapbase	= LS1X_UART ## _id ## _BASE,	\
 		.irq		= LS1X_UART ## _id ## _IRQ,	\
 		.iotype		= UPIO_MEM,			\
-		.flags		= UPF_IOREMAP | UPF_FIXED_TYPE,	\
+		.flags		= UPF_IOREMAP | UPF_FIXED_TYPE, \
 		.type		= PORT_16550A,			\
 	}
 
diff --git a/arch/mips/loongson1/common/prom.c b/arch/mips/loongson1/common/prom.c
index 1f8e49f..2a47af5a5 100644
--- a/arch/mips/loongson1/common/prom.c
+++ b/arch/mips/loongson1/common/prom.c
@@ -3,8 +3,8 @@
  *
  * Modified from arch/mips/pnx833x/common/prom.c.
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -73,7 +73,7 @@
 
 #define PORT(offset)	(u8 *)(KSEG1ADDR(LS1X_UART0_BASE + offset))
 
-void __init prom_putchar(char c)
+void prom_putchar(char c)
 {
 	int timeout;
 
diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c
index fb979a7..d4f610f 100644
--- a/arch/mips/loongson1/common/reset.c
+++ b/arch/mips/loongson1/common/reset.c
@@ -1,8 +1,8 @@
 /*
  * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson1/common/setup.c b/arch/mips/loongson1/common/setup.c
index 62128cc..62f41af 100644
--- a/arch/mips/loongson1/common/setup.c
+++ b/arch/mips/loongson1/common/setup.c
@@ -1,8 +1,8 @@
 /*
  * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/loongson1/ls1b/board.c b/arch/mips/loongson1/ls1b/board.c
index 1fbd526..b26b10d 100644
--- a/arch/mips/loongson1/ls1b/board.c
+++ b/arch/mips/loongson1/ls1b/board.c
@@ -1,8 +1,8 @@
 /*
  * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/math-emu/Makefile b/arch/mips/math-emu/Makefile
index 9660723..121a848 100644
--- a/arch/mips/math-emu/Makefile
+++ b/arch/mips/math-emu/Makefile
@@ -9,4 +9,3 @@
 	   sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
 	   sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
 	   dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
-
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 47c77e7..afb5a0b 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -169,7 +169,7 @@
 
 /*
  * In the Linux kernel, we support selection of FPR format on the
- * basis of the Status.FR bit.  If an FPU is not present, the FR bit
+ * basis of the Status.FR bit.	If an FPU is not present, the FR bit
  * is hardwired to zero, which would imply a 32-bit FPU even for
  * 64-bit CPUs so we rather look at TIF_32BIT_REGS.
  * FPU emu is slow and bulky and optimizing this function offers fairly
@@ -234,7 +234,7 @@
 	if (xcp->cp0_cause & CAUSEF_BD) {
 		/*
 		 * The instruction to be emulated is in a branch delay slot
-		 * which means that we have to  emulate the branch instruction
+		 * which means that we have to	emulate the branch instruction
 		 * BEFORE we do the cop1 instruction.
 		 *
 		 * This branch could be a COP1 branch, but in that case we
@@ -1335,8 +1335,8 @@
 		else {
 			/*
 			 * The 'ieee754_csr' is an alias of
-			 * ctx->fcr31.  No need to copy ctx->fcr31 to
-			 * ieee754_csr.  But ieee754_csr.rm is ieee
+			 * ctx->fcr31.	No need to copy ctx->fcr31 to
+			 * ieee754_csr.	 But ieee754_csr.rm is ieee
 			 * library modes. (not mips rounding mode)
 			 */
 			/* convert to ieee library modes */
diff --git a/arch/mips/math-emu/dp_add.c b/arch/mips/math-emu/dp_add.c
index b422fca..c57c8ad 100644
--- a/arch/mips/math-emu/dp_add.c
+++ b/arch/mips/math-emu/dp_add.c
@@ -153,7 +153,7 @@
 		xe = xe;
 		xs = xs;
 
-		if (xm >> (DP_MBITS + 1 + 3)) {	/* carry out */
+		if (xm >> (DP_MBITS + 1 + 3)) { /* carry out */
 			xm = XDPSRS1(xm);
 			xe++;
 		}
diff --git a/arch/mips/math-emu/dp_sqrt.c b/arch/mips/math-emu/dp_sqrt.c
index a2a51b8..b874d60 100644
--- a/arch/mips/math-emu/dp_sqrt.c
+++ b/arch/mips/math-emu/dp_sqrt.c
@@ -87,7 +87,7 @@
 	if (xe > 512) {		/* x > 2**-512? */
 		xe -= 512;	/* x = x / 2**512 */
 		scalx += 256;
-	} else if (xe < -512) {	/* x < 2**-512? */
+	} else if (xe < -512) { /* x < 2**-512? */
 		xe += 512;	/* x = x * 2**512 */
 		scalx -= 256;
 	}
@@ -108,13 +108,13 @@
 	y.bits &= 0xffffffff00000000LL;
 
 	/* triple to almost 56 sig. bits: y ~= sqrt(x) to within 1 ulp */
-	/* t=y*y; z=t;  pt[n0]+=0x00100000; t+=z; z=(x-z)*y; */
+	/* t=y*y; z=t;	pt[n0]+=0x00100000; t+=z; z=(x-z)*y; */
 	z = t = ieee754dp_mul(y, y);
 	t.parts.bexp += 0x001;
 	t = ieee754dp_add(t, z);
 	z = ieee754dp_mul(ieee754dp_sub(x, z), y);
 
-	/* t=z/(t+x) ;  pt[n0]+=0x00100000; y+=t; */
+	/* t=z/(t+x) ;	pt[n0]+=0x00100000; y+=t; */
 	t = ieee754dp_div(z, ieee754dp_add(t, x));
 	t.parts.bexp += 0x001;
 	y = ieee754dp_add(y, t);
diff --git a/arch/mips/math-emu/dp_sub.c b/arch/mips/math-emu/dp_sub.c
index 0de098c..91e0a4b 100644
--- a/arch/mips/math-emu/dp_sub.c
+++ b/arch/mips/math-emu/dp_sub.c
@@ -158,7 +158,7 @@
 		xe = xe;
 		xs = xs;
 
-		if (xm >> (DP_MBITS + 1 + 3)) {	/* carry out */
+		if (xm >> (DP_MBITS + 1 + 3)) { /* carry out */
 			xm = XDPSRS1(xm);	/* shift preserving sticky */
 			xe++;
 		}
diff --git a/arch/mips/math-emu/ieee754.c b/arch/mips/math-emu/ieee754.c
index 30554e1..0015cf1 100644
--- a/arch/mips/math-emu/ieee754.c
+++ b/arch/mips/math-emu/ieee754.c
@@ -56,21 +56,21 @@
 #endif
 
 const struct ieee754dp_konst __ieee754dp_spcvals[] = {
-	DPSTR(0, DP_EMIN - 1 + DP_EBIAS, 0, 0),	/* + zero   */
-	DPSTR(1, DP_EMIN - 1 + DP_EBIAS, 0, 0),	/* - zero   */
+	DPSTR(0, DP_EMIN - 1 + DP_EBIAS, 0, 0), /* + zero   */
+	DPSTR(1, DP_EMIN - 1 + DP_EBIAS, 0, 0), /* - zero   */
 	DPSTR(0, DP_EBIAS, 0, 0),	/* + 1.0   */
 	DPSTR(1, DP_EBIAS, 0, 0),	/* - 1.0   */
 	DPSTR(0, 3 + DP_EBIAS, 0x40000, 0),	/* + 10.0   */
 	DPSTR(1, 3 + DP_EBIAS, 0x40000, 0),	/* - 10.0   */
-	DPSTR(0, DP_EMAX + 1 + DP_EBIAS, 0, 0),	/* + infinity */
-	DPSTR(1, DP_EMAX + 1 + DP_EBIAS, 0, 0),	/* - infinity */
+	DPSTR(0, DP_EMAX + 1 + DP_EBIAS, 0, 0), /* + infinity */
+	DPSTR(1, DP_EMAX + 1 + DP_EBIAS, 0, 0), /* - infinity */
 	DPSTR(0, DP_EMAX+1+DP_EBIAS, 0x7FFFF, 0xFFFFFFFF), /* + indef quiet Nan */
 	DPSTR(0, DP_EMAX + DP_EBIAS, 0xFFFFF, 0xFFFFFFFF),	/* + max */
 	DPSTR(1, DP_EMAX + DP_EBIAS, 0xFFFFF, 0xFFFFFFFF),	/* - max */
 	DPSTR(0, DP_EMIN + DP_EBIAS, 0, 0),	/* + min normal */
 	DPSTR(1, DP_EMIN + DP_EBIAS, 0, 0),	/* - min normal */
-	DPSTR(0, DP_EMIN - 1 + DP_EBIAS, 0, 1),	/* + min denormal */
-	DPSTR(1, DP_EMIN - 1 + DP_EBIAS, 0, 1),	/* - min denormal */
+	DPSTR(0, DP_EMIN - 1 + DP_EBIAS, 0, 1), /* + min denormal */
+	DPSTR(1, DP_EMIN - 1 + DP_EBIAS, 0, 1), /* - min denormal */
 	DPSTR(0, 31 + DP_EBIAS, 0, 0),	/* + 1.0e31 */
 	DPSTR(0, 63 + DP_EBIAS, 0, 0),	/* + 1.0e63 */
 };
@@ -84,9 +84,9 @@
 	SPSTR(1, 3 + SP_EBIAS, 0x200000),	/* - 10.0   */
 	SPSTR(0, SP_EMAX + 1 + SP_EBIAS, 0),	/* + infinity */
 	SPSTR(1, SP_EMAX + 1 + SP_EBIAS, 0),	/* - infinity */
-	SPSTR(0, SP_EMAX+1+SP_EBIAS, 0x3FFFFF),     /* + indef quiet Nan  */
-	SPSTR(0, SP_EMAX + SP_EBIAS, 0x7FFFFF),	/* + max normal */
-	SPSTR(1, SP_EMAX + SP_EBIAS, 0x7FFFFF),	/* - max normal */
+	SPSTR(0, SP_EMAX+1+SP_EBIAS, 0x3FFFFF),	    /* + indef quiet Nan  */
+	SPSTR(0, SP_EMAX + SP_EBIAS, 0x7FFFFF), /* + max normal */
+	SPSTR(1, SP_EMAX + SP_EBIAS, 0x7FFFFF), /* - max normal */
 	SPSTR(0, SP_EMIN + SP_EBIAS, 0),	/* + min normal */
 	SPSTR(1, SP_EMIN + SP_EBIAS, 0),	/* - min normal */
 	SPSTR(0, SP_EMIN - 1 + SP_EBIAS, 1),	/* + min denormal */
diff --git a/arch/mips/math-emu/ieee754dp.c b/arch/mips/math-emu/ieee754dp.c
index 080b5ca..068e56b 100644
--- a/arch/mips/math-emu/ieee754dp.c
+++ b/arch/mips/math-emu/ieee754dp.c
@@ -116,7 +116,7 @@
 				xm += 0x8;
 			break;
 		case IEEE754_RD:	/* toward -Infinity */
-			if (sn)	/* ?? */
+			if (sn) /* ?? */
 				xm += 0x8;
 			break;
 		}
diff --git a/arch/mips/math-emu/ieee754int.h b/arch/mips/math-emu/ieee754int.h
index 2a7d43f..4b6c6fb3 100644
--- a/arch/mips/math-emu/ieee754int.h
+++ b/arch/mips/math-emu/ieee754int.h
@@ -56,7 +56,7 @@
 
 #define CLPAIR(x, y)	((x)*6+(y))
 
-#define CLEARCX	\
+#define CLEARCX \
   (ieee754_csr.cx = 0)
 
 #define SETCX(x) \
diff --git a/arch/mips/math-emu/ieee754sp.c b/arch/mips/math-emu/ieee754sp.c
index 271d00d..15d1e36 100644
--- a/arch/mips/math-emu/ieee754sp.c
+++ b/arch/mips/math-emu/ieee754sp.c
@@ -117,7 +117,7 @@
 				xm += 0x8;
 			break;
 		case IEEE754_RD:	/* toward -Infinity */
-			if (sn)	/* ?? */
+			if (sn) /* ?? */
 				xm += 0x8;
 			break;
 		}
diff --git a/arch/mips/math-emu/ieee754xcpt.c b/arch/mips/math-emu/ieee754xcpt.c
index b99a693..96716711 100644
--- a/arch/mips/math-emu/ieee754xcpt.c
+++ b/arch/mips/math-emu/ieee754xcpt.c
@@ -25,7 +25,7 @@
  *  Added preprocessor hacks to map to Linux kernel diagnostics.
  *
  *  Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
- *  Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *  Copyright (C) 2000 MIPS Technologies, Inc.	All rights reserved.
  *************************************************************************/
 
 #include <linux/kernel.h>
diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c
index 52e6c58..1c58657 100644
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -1,6 +1,6 @@
 /*
  *  Kevin D. Kissell, kevink@mips and Carsten Langgaard, carstenl@mips.com
- *  Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *  Copyright (C) 2000 MIPS Technologies, Inc.	All rights reserved.
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
diff --git a/arch/mips/math-emu/sp_add.c b/arch/mips/math-emu/sp_add.c
index ae1a327..c446e64 100644
--- a/arch/mips/math-emu/sp_add.c
+++ b/arch/mips/math-emu/sp_add.c
@@ -148,7 +148,7 @@
 		xe = xe;
 		xs = xs;
 
-		if (xm >> (SP_MBITS + 1 + 3)) {	/* carry out */
+		if (xm >> (SP_MBITS + 1 + 3)) { /* carry out */
 			SPXSRSX1();
 		}
 	} else {
diff --git a/arch/mips/math-emu/sp_mul.c b/arch/mips/math-emu/sp_mul.c
index 2722a25..fa4675c 100644
--- a/arch/mips/math-emu/sp_mul.c
+++ b/arch/mips/math-emu/sp_mul.c
@@ -131,7 +131,7 @@
 			hrm = hxm * hym;	/* 16 * 16 => 32 */
 
 			{
-				unsigned t = lxm * hym;	/* 16 * 16 => 32 */
+				unsigned t = lxm * hym; /* 16 * 16 => 32 */
 				{
 					unsigned at = lrm + (t << 16);
 					hrm += at < lrm;
@@ -141,7 +141,7 @@
 			}
 
 			{
-				unsigned t = hxm * lym;	/* 16 * 16 => 32 */
+				unsigned t = hxm * lym; /* 16 * 16 => 32 */
 				{
 					unsigned at = lrm + (t << 16);
 					hrm += at < lrm;
diff --git a/arch/mips/math-emu/sp_sub.c b/arch/mips/math-emu/sp_sub.c
index 886ed5b..e595c6f 100644
--- a/arch/mips/math-emu/sp_sub.c
+++ b/arch/mips/math-emu/sp_sub.c
@@ -153,7 +153,7 @@
 		xe = xe;
 		xs = xs;
 
-		if (xm >> (SP_MBITS + 1 + 3)) {	/* carry out */
+		if (xm >> (SP_MBITS + 1 + 3)) { /* carry out */
 			SPXSRSX1();	/* shift preserving sticky */
 		}
 	} else {
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 90ceb963..1dcec30 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -16,9 +16,9 @@
 obj-$(CONFIG_CPU_R8000)		+= c-r4k.o cex-gen.o tlb-r8k.o
 obj-$(CONFIG_CPU_SB1)		+= c-r4k.o cerr-sb1.o cex-sb1.o tlb-r4k.o
 obj-$(CONFIG_CPU_TX39XX)	+= c-tx39.o tlb-r3k.o
-obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= c-octeon.o cex-oct.o tlb-r4k.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON) += c-octeon.o cex-oct.o tlb-r4k.o
 
 obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
-obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o
-obj-$(CONFIG_RM7000_CPU_SCACHE)	+= sc-rm7k.o
+obj-$(CONFIG_R5000_CPU_SCACHE)	+= sc-r5k.o
+obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o
 obj-$(CONFIG_MIPS_CPU_SCACHE)	+= sc-mips.o
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 6ec04da..8557fb5 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -106,7 +106,7 @@
  * Called to flush all memory associated with a memory
  * context.
  *
- * @mm:     Memory context to flush
+ * @mm:	    Memory context to flush
  */
 static void octeon_flush_cache_mm(struct mm_struct *mm)
 {
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index 031c4c2..704dc73 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -119,7 +119,7 @@
 	write_c0_status((ST0_ISC|ST0_SWC|flags)&~ST0_IEC);
 
 	for (i = 0; i < size; i += 0x080) {
-		asm( 	"sb\t$0, 0x000(%0)\n\t"
+		asm(	"sb\t$0, 0x000(%0)\n\t"
 			"sb\t$0, 0x004(%0)\n\t"
 			"sb\t$0, 0x008(%0)\n\t"
 			"sb\t$0, 0x00c(%0)\n\t"
@@ -176,7 +176,7 @@
 	write_c0_status((ST0_ISC|flags)&~ST0_IEC);
 
 	for (i = 0; i < size; i += 0x080) {
-		asm( 	"sb\t$0, 0x000(%0)\n\t"
+		asm(	"sb\t$0, 0x000(%0)\n\t"
 			"sb\t$0, 0x004(%0)\n\t"
 			"sb\t$0, 0x008(%0)\n\t"
 			"sb\t$0, 0x00c(%0)\n\t"
@@ -285,13 +285,13 @@
 	write_c0_status(flags&~ST0_IEC);
 
 	/* Fill the TLB to avoid an exception with caches isolated. */
-	asm( 	"lw\t$0, 0x000(%0)\n\t"
+	asm(	"lw\t$0, 0x000(%0)\n\t"
 		"lw\t$0, 0x004(%0)\n\t"
 		: : "r" (addr) );
 
 	write_c0_status((ST0_ISC|ST0_SWC|flags)&~ST0_IEC);
 
-	asm( 	"sb\t$0, 0x000(%0)\n\t"
+	asm(	"sb\t$0, 0x000(%0)\n\t"
 		"sb\t$0, 0x004(%0)\n\t"
 		: : "r" (addr) );
 
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 0f7d788..ecca559 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -160,7 +160,7 @@
 		"1:\n\t" \
 		)
 #define CACHE32_UNROLL32_ALIGN	JUMP_TO_ALIGN(10) /* 32 * 32 = 1024 */
-#define CACHE32_UNROLL32_ALIGN2	JUMP_TO_ALIGN(11)
+#define CACHE32_UNROLL32_ALIGN2 JUMP_TO_ALIGN(11)
 
 static inline void blast_r4600_v1_icache32(void)
 {
@@ -177,7 +177,7 @@
 	unsigned long end = start + current_cpu_data.icache.waysize;
 	unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
 	unsigned long ws_end = current_cpu_data.icache.ways <<
-	                       current_cpu_data.icache.waybit;
+			       current_cpu_data.icache.waybit;
 	unsigned long ws, addr;
 
 	CACHE32_UNROLL32_ALIGN2;
@@ -208,7 +208,7 @@
 	unsigned long end = start + PAGE_SIZE;
 	unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
 	unsigned long ws_end = current_cpu_data.icache.ways <<
-	                       current_cpu_data.icache.waybit;
+			       current_cpu_data.icache.waybit;
 	unsigned long ws, addr;
 
 	CACHE32_UNROLL32_ALIGN2;
@@ -637,7 +637,7 @@
 			 * for the cache instruction on MIPS processors and
 			 * some processors, among them the RM5200 and RM7000
 			 * QED processors will throw an address error for cache
-			 * hit ops with insufficient alignment.  Solved by
+			 * hit ops with insufficient alignment.	 Solved by
 			 * aligning the address to cache line size.
 			 */
 			blast_inv_scache_range(addr, addr + size);
@@ -864,7 +864,7 @@
 		icache_size = 1 << (12 + ((config & CONF_IC) >> 9));
 		c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
 		c->icache.ways = 1;
-		c->icache.waybit = 0; 	/* doesn't matter */
+		c->icache.waybit = 0;	/* doesn't matter */
 
 		dcache_size = 1 << (12 + ((config & CONF_DC) >> 6));
 		c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
@@ -923,7 +923,7 @@
 		icache_size = 1 << (10 + ((config & CONF_IC) >> 9));
 		c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
 		c->icache.ways = 1;
-		c->icache.waybit = 0; 	/* doesn't matter */
+		c->icache.waybit = 0;	/* doesn't matter */
 
 		dcache_size = 1 << (10 + ((config & CONF_DC) >> 6));
 		c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
@@ -986,8 +986,8 @@
 		c->icache.ways = 1 + ((config1 >> 16) & 7);
 
 		icache_size = c->icache.sets *
-		              c->icache.ways *
-		              c->icache.linesz;
+			      c->icache.ways *
+			      c->icache.linesz;
 		c->icache.waybit = __ffs(icache_size/c->icache.ways);
 
 		if (config & 0x8)		/* VI bit */
@@ -1006,8 +1006,8 @@
 		c->dcache.ways = 1 + ((config1 >> 7) & 7);
 
 		dcache_size = c->dcache.sets *
-		              c->dcache.ways *
-		              c->dcache.linesz;
+			      c->dcache.ways *
+			      c->dcache.linesz;
 		c->dcache.waybit = __ffs(dcache_size/c->dcache.ways);
 
 		c->options |= MIPS_CPU_PREFETCH;
@@ -1016,7 +1016,7 @@
 
 	/*
 	 * Processor configuration sanity check for the R4000SC erratum
-	 * #5.  With page sizes larger than 32kB there is no possibility
+	 * #5.	With page sizes larger than 32kB there is no possibility
 	 * to get a VCE exception anymore so we don't care about this
 	 * misconfiguration.  The case is rather theoretical anyway;
 	 * presumably no vendor is shipping his hardware in the "bad"
@@ -1057,6 +1057,7 @@
 		break;
 
 	case CPU_M14KC:
+	case CPU_M14KEC:
 	case CPU_24K:
 	case CPU_34K:
 	case CPU_74K:
@@ -1088,7 +1089,7 @@
 		break;
 	}
 
-#ifdef  CONFIG_CPU_LOONGSON2
+#ifdef	CONFIG_CPU_LOONGSON2
 	/*
 	 * LOONGSON2 has 4 way icache, but when using indexed cache op,
 	 * one op will act on all 4 ways
@@ -1228,7 +1229,7 @@
 #ifdef CONFIG_R5000_CPU_SCACHE
 		r5k_sc_init();
 #endif
-                return;
+		return;
 
 	case CPU_RM7000:
 #ifdef CONFIG_RM7000_CPU_SCACHE
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index 87d23ca..ba9da27 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -33,9 +33,9 @@
 /* This sequence is required to ensure icache is disabled immediately */
 #define TX39_STOP_STREAMING() \
 __asm__ __volatile__( \
-	".set    push\n\t" \
-	".set    noreorder\n\t" \
-	"b       1f\n\t" \
+	".set	 push\n\t" \
+	".set	 noreorder\n\t" \
+	"b	 1f\n\t" \
 	"nop\n\t" \
 	"1:\n\t" \
 	".set pop" \
@@ -361,7 +361,7 @@
 		/* TX39/H core (writethru direct-map cache) */
 		__flush_cache_vmap	= tx39__flush_cache_vmap;
 		__flush_cache_vunmap	= tx39__flush_cache_vunmap;
-		flush_cache_all	= tx39h_flush_icache_all;
+		flush_cache_all = tx39h_flush_icache_all;
 		__flush_cache_all	= tx39h_flush_icache_all;
 		flush_cache_mm		= (void *) tx39h_flush_icache_all;
 		flush_cache_range	= (void *) tx39h_flush_icache_all;
@@ -409,8 +409,8 @@
 		_dma_cache_inv = tx39_dma_cache_inv;
 
 		shm_align_mask = max_t(unsigned long,
-		                       (dcache_size / current_cpu_data.dcache.ways) - 1,
-		                       PAGE_SIZE - 1);
+				       (dcache_size / current_cpu_data.dcache.ways) - 1,
+				       PAGE_SIZE - 1);
 
 		break;
 	}
diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c
index 3571090..576add3 100644
--- a/arch/mips/mm/cerr-sb1.c
+++ b/arch/mips/mm/cerr-sb1.c
@@ -27,7 +27,7 @@
 
 /*
  * We'd like to dump the L2_ECC_TAG register on errors, but errata make
- * that unsafe... So for now we don't.  (BCM1250/BCM112x erratum SOC-48.)
+ * that unsafe... So for now we don't.	(BCM1250/BCM112x erratum SOC-48.)
  */
 #undef DUMP_L2_ECC_TAG_ON_ERROR
 
@@ -48,7 +48,7 @@
 #define CP0_CERRI_EXTERNAL     (1 << 26)
 
 #define CP0_CERRI_IDX_VALID(c) (!((c) & CP0_CERRI_EXTERNAL))
-#define CP0_CERRI_DATA         (CP0_CERRI_DATA_PARITY)
+#define CP0_CERRI_DATA	       (CP0_CERRI_DATA_PARITY)
 
 #define CP0_CERRD_MULTIPLE     (1 << 31)
 #define CP0_CERRD_TAG_STATE    (1 << 30)
@@ -56,8 +56,8 @@
 #define CP0_CERRD_DATA_SBE     (1 << 28)
 #define CP0_CERRD_DATA_DBE     (1 << 27)
 #define CP0_CERRD_EXTERNAL     (1 << 26)
-#define CP0_CERRD_LOAD         (1 << 25)
-#define CP0_CERRD_STORE        (1 << 24)
+#define CP0_CERRD_LOAD	       (1 << 25)
+#define CP0_CERRD_STORE	       (1 << 24)
 #define CP0_CERRD_FILLWB       (1 << 23)
 #define CP0_CERRD_COHERENCY    (1 << 22)
 #define CP0_CERRD_DUPTAG       (1 << 21)
@@ -69,10 +69,10 @@
    (CP0_CERRD_LOAD | CP0_CERRD_STORE | CP0_CERRD_FILLWB | CP0_CERRD_COHERENCY | CP0_CERRD_DUPTAG)
 #define CP0_CERRD_TYPES \
    (CP0_CERRD_TAG_STATE | CP0_CERRD_TAG_ADDRESS | CP0_CERRD_DATA_SBE | CP0_CERRD_DATA_DBE | CP0_CERRD_EXTERNAL)
-#define CP0_CERRD_DATA         (CP0_CERRD_DATA_SBE | CP0_CERRD_DATA_DBE)
+#define CP0_CERRD_DATA	       (CP0_CERRD_DATA_SBE | CP0_CERRD_DATA_DBE)
 
-static uint32_t	extract_ic(unsigned short addr, int data);
-static uint32_t	extract_dc(unsigned short addr, int data);
+static uint32_t extract_ic(unsigned short addr, int data);
+static uint32_t extract_dc(unsigned short addr, int data);
 
 static inline void breakout_errctl(unsigned int val)
 {
@@ -209,11 +209,11 @@
 	  "=r" (dpahi), "=r" (dpalo), "=r" (eepc));
 
 	cerr_dpa = (((uint64_t)dpahi) << 32) | dpalo;
-	printk(" c0_errorepc ==   %08x\n", eepc);
-	printk(" c0_errctl   ==   %08x", errctl);
+	printk(" c0_errorepc ==	  %08x\n", eepc);
+	printk(" c0_errctl   ==	  %08x", errctl);
 	breakout_errctl(errctl);
 	if (errctl & CP0_ERRCTL_ICACHE) {
-		printk(" c0_cerr_i   ==   %08x", cerr_i);
+		printk(" c0_cerr_i   ==	  %08x", cerr_i);
 		breakout_cerri(cerr_i);
 		if (CP0_CERRI_IDX_VALID(cerr_i)) {
 			/* Check index of EPC, allowing for delay slot */
@@ -229,7 +229,7 @@
 		}
 	}
 	if (errctl & CP0_ERRCTL_DCACHE) {
-		printk(" c0_cerr_d   ==   %08x", cerr_d);
+		printk(" c0_cerr_d   ==	  %08x", cerr_d);
 		breakout_cerrd(cerr_d);
 		if (CP0_CERRD_DPA_VALID(cerr_d)) {
 			printk(" c0_cerr_dpa == %010llx\n", cerr_dpa);
@@ -256,7 +256,7 @@
 	/*
 	 * Calling panic() when a fatal cache error occurs scrambles the
 	 * state of the system (and the cache), making it difficult to
-	 * investigate after the fact.  However, if you just stall the CPU,
+	 * investigate after the fact.	However, if you just stall the CPU,
 	 * the other CPU may keep on running, which is typically very
 	 * undesirable.
 	 */
@@ -411,7 +411,7 @@
 				"	dmfc0  $1, $28, 1\n\t"
 				"	dsrl32 %1, $1, 0 \n\t"
 				"	sll    %2, $1, 0 \n\t"
-				"	.set	pop         \n"
+				"	.set	pop	    \n"
 				: "=r" (datahi), "=r" (insta), "=r" (instb)
 				: "r" ((way << 13) | addr | (offset << 3)));
 				predecode = (datahi >> 8) & 0xff;
@@ -441,8 +441,8 @@
 {
 	uint64_t t;
 	uint32_t w;
-	uint8_t  p;
-	int      i;
+	uint8_t	 p;
+	int	 i;
 
 	p = 0;
 	for (i = 7; i >= 0; i--)
diff --git a/arch/mips/mm/cex-gen.S b/arch/mips/mm/cex-gen.S
index e743622..45dff5c 100644
--- a/arch/mips/mm/cex-gen.S
+++ b/arch/mips/mm/cex-gen.S
@@ -14,17 +14,17 @@
 #include <asm/stackframe.h>
 
 /*
- * Game over.  Go to the button.  Press gently.  Swear where allowed by
+ * Game over.  Go to the button.  Press gently.	 Swear where allowed by
  * legislation.
  */
 	LEAF(except_vec2_generic)
 	.set	noreorder
 	.set	noat
-	.set    mips0
+	.set	mips0
 	/*
 	 * This is a very bad place to be.  Our cache error
 	 * detection has triggered.  If we have write-back data
-	 * in the cache, we may not be able to recover.  As a
+	 * in the cache, we may not be able to recover.	 As a
 	 * first-order desperate measure, turn off KSEG0 cacheing.
 	 */
 	mfc0	k0,CP0_CONFIG
diff --git a/arch/mips/mm/cex-oct.S b/arch/mips/mm/cex-oct.S
index 3db8553..9029092 100644
--- a/arch/mips/mm/cex-oct.S
+++ b/arch/mips/mm/cex-oct.S
@@ -18,7 +18,7 @@
  */
 	LEAF(except_vec2_octeon)
 
-	.set    push
+	.set	push
 	.set	mips64r2
 	.set	noreorder
 	.set	noat
@@ -27,19 +27,19 @@
 	/* due to an errata we need to read the COP0 CacheErr (Dcache)
 	 * before any cache/DRAM access	 */
 
-	rdhwr   k0, $0        /* get core_id */
-	PTR_LA  k1, cache_err_dcache
-	sll     k0, k0, 3
+	rdhwr	k0, $0	      /* get core_id */
+	PTR_LA	k1, cache_err_dcache
+	sll	k0, k0, 3
 	PTR_ADDU k1, k0, k1    /* k1 = &cache_err_dcache[core_id] */
 
-	dmfc0   k0, CP0_CACHEERR, 1
-	sd      k0, (k1)
-	dmtc0   $0, CP0_CACHEERR, 1
+	dmfc0	k0, CP0_CACHEERR, 1
+	sd	k0, (k1)
+	dmtc0	$0, CP0_CACHEERR, 1
 
-        /* check whether this is a nested exception */
-	mfc0    k1, CP0_STATUS
-	andi    k1, k1, ST0_EXL
-	beqz    k1, 1f
+	/* check whether this is a nested exception */
+	mfc0	k1, CP0_STATUS
+	andi	k1, k1, ST0_EXL
+	beqz	k1, 1f
 	 nop
 	j	cache_parity_error_octeon_non_recoverable
 	 nop
@@ -48,22 +48,22 @@
 1:	j	handle_cache_err
 	 nop
 
-	.set    pop
+	.set	pop
 	END(except_vec2_octeon)
 
  /* We need to jump to handle_cache_err so that the previous handler
   * can fit within 0x80 bytes. We also move from 0xFFFFFFFFAXXXXXXX
-  * space (uncached) to the 0xFFFFFFFF8XXXXXXX space (cached).  */
+  * space (uncached) to the 0xFFFFFFFF8XXXXXXX space (cached).	*/
 	LEAF(handle_cache_err)
-	.set    push
-        .set    noreorder
-        .set    noat
+	.set	push
+	.set	noreorder
+	.set	noat
 
 	SAVE_ALL
 	KMODE
-	jal     cache_parity_error_octeon_recoverable
+	jal	cache_parity_error_octeon_recoverable
 	nop
-	j       ret_from_exception
+	j	ret_from_exception
 	nop
 
 	.set pop
diff --git a/arch/mips/mm/cex-sb1.S b/arch/mips/mm/cex-sb1.S
index 89c412b..fe1d887 100644
--- a/arch/mips/mm/cex-sb1.S
+++ b/arch/mips/mm/cex-sb1.S
@@ -24,9 +24,9 @@
 #include <asm/cacheops.h>
 #include <asm/sibyte/board.h>
 
-#define C0_ERRCTL     $26             /* CP0: Error info */
-#define C0_CERR_I     $27             /* CP0: Icache error */
-#define C0_CERR_D     $27,1           /* CP0: Dcache error */
+#define C0_ERRCTL     $26	      /* CP0: Error info */
+#define C0_CERR_I     $27	      /* CP0: Icache error */
+#define C0_CERR_D     $27,1	      /* CP0: Dcache error */
 
 	/*
 	 * Based on SiByte sample software cache-err/cerr.S
@@ -88,7 +88,7 @@
 	/*
 	 * k0 has C0_ERRCTL << 1, which puts 'DC' at bit 31.  Any
 	 * Dcache errors we can recover from will take more extensive
-	 * processing.  For now, they are considered "unrecoverable".
+	 * processing.	For now, they are considered "unrecoverable".
 	 * Note that 'DC' becoming set (outside of ERL mode) will
 	 * cause 'IC' to clear; so if there's an Icache error, we'll
 	 * only find out about it if we recover from this error and
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 3fab204..f9ef838 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -4,7 +4,7 @@
  * for more details.
  *
  * Copyright (C) 2000  Ani Joshi <ajoshi@unixbox.com>
- * Copyright (C) 2000, 2001, 06  Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2000, 2001, 06	 Ralf Baechle <ralf@linux-mips.org>
  * swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
  */
 
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index ddcec1e..0fead53 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -52,7 +52,7 @@
 
 #ifdef CONFIG_KPROBES
 	/*
-	 * This is to notify the fault handler of the kprobes.  The
+	 * This is to notify the fault handler of the kprobes.	The
 	 * exception code is redundant as it is also carried in REGS,
 	 * but we pass it anyhow.
 	 */
@@ -216,7 +216,7 @@
 	}
 
 no_context:
-	/* Are we prepared to handle this kernel fault?  */
+	/* Are we prepared to handle this kernel fault?	 */
 	if (fixup_exception(regs)) {
 		current->thread.cp0_baduaddr = address;
 		return;
diff --git a/arch/mips/mm/gup.c b/arch/mips/mm/gup.c
index dcfd573..d4ea5c9 100644
--- a/arch/mips/mm/gup.c
+++ b/arch/mips/mm/gup.c
@@ -249,7 +249,7 @@
  * @nr_pages:	number of pages from start to pin
  * @write:	whether pages will be written to
  * @pages:	array that receives pointers to the pages pinned.
- * 		Should be at least nr_pages long.
+ *		Should be at least nr_pages long.
  *
  * Attempt to pin user pages in memory without taking mm->mmap_sem.
  * If not successful, it will fall back to taking the lock and
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index be9acb2..6792925 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -66,7 +66,7 @@
 
 /*
  * We have up to 8 empty zeroed pages so we can map one of the right colour
- * when needed.  This is necessary only on R4000 / R4400 SC and MC versions
+ * when needed.	 This is necessary only on R4000 / R4400 SC and MC versions
  * where we have to avoid VCED / VECI exceptions for good performance at
  * any price.  Since page is never written to after the initialization we
  * don't have to care about aliases on other CPUs.
@@ -380,7 +380,7 @@
 	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
 
 	totalram_pages += free_all_bootmem();
-	totalram_pages -= setup_zero_pages();	/* Setup zeroed pages.  */
+	totalram_pages -= setup_zero_pages();	/* Setup zeroed pages.	*/
 
 	reservedpages = ram = 0;
 	for (tmp = 0; tmp < max_low_pfn; tmp++)
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index cacfd31..7f840bc 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -22,7 +22,7 @@
 	phys_t end;
 	unsigned long pfn;
 	pgprot_t pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | __READABLE
-	                           | __WRITEABLE | flags);
+				   | __WRITEABLE | flags);
 
 	address &= ~PMD_MASK;
 	end = address + size;
@@ -185,7 +185,7 @@
 	if (!p)
 		printk(KERN_ERR "iounmap: bad address %p\n", addr);
 
-        kfree(p);
+	kfree(p);
 }
 
 EXPORT_SYMBOL(__ioremap);
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index 8e666c5..a29fba5 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -271,7 +271,7 @@
 		uasm_i_lui(&buf, AT, 0xa000);
 
 	off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size)
-	                        * cache_line_size : 0;
+				* cache_line_size : 0;
 	while (off) {
 		build_clear_pref(&buf, -off);
 		off -= cache_line_size;
@@ -417,13 +417,13 @@
 		uasm_i_lui(&buf, AT, 0xa000);
 
 	off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
-	                        cache_line_size : 0;
+				cache_line_size : 0;
 	while (off) {
 		build_copy_load_pref(&buf, -off);
 		off -= cache_line_size;
 	}
 	off = cache_line_size ? min(8, pref_bias_copy_store / cache_line_size) *
-	                        cache_line_size : 0;
+				cache_line_size : 0;
 	while (off) {
 		build_copy_store_pref(&buf, -off);
 		off -= cache_line_size;
diff --git a/arch/mips/mm/pgtable-64.c b/arch/mips/mm/pgtable-64.c
index ee331bb..e8adc00 100644
--- a/arch/mips/mm/pgtable-64.c
+++ b/arch/mips/mm/pgtable-64.c
@@ -24,7 +24,7 @@
 	entry = (unsigned long)invalid_pmd_table;
 #endif
 
- 	p = (unsigned long *) page;
+	p = (unsigned long *) page;
 	end = p + PTRS_PER_PGD;
 
 	do {
@@ -45,7 +45,7 @@
 {
 	unsigned long *p, *end;
 
- 	p = (unsigned long *) addr;
+	p = (unsigned long *) addr;
 	end = p + PTRS_PER_PMD;
 
 	do {
diff --git a/arch/mips/mm/sc-ip22.c b/arch/mips/mm/sc-ip22.c
index 1eb708e..c6aaed9 100644
--- a/arch/mips/mm/sc-ip22.c
+++ b/arch/mips/mm/sc-ip22.c
@@ -159,7 +159,7 @@
 }
 
 /* XXX Check with wje if the Indy caches can differenciate between
-   writeback + invalidate and just invalidate.  */
+   writeback + invalidate and just invalidate.	*/
 static struct bcache_ops indy_sc_ops = {
 	.bc_enable = indy_sc_enable,
 	.bc_disable = indy_sc_disable,
diff --git a/arch/mips/mm/sc-r5k.c b/arch/mips/mm/sc-r5k.c
index 8d90ff2..8bc6772 100644
--- a/arch/mips/mm/sc-r5k.c
+++ b/arch/mips/mm/sc-r5k.c
@@ -58,7 +58,7 @@
 
 static void r5k_sc_enable(void)
 {
-        unsigned long flags;
+	unsigned long flags;
 
 	local_irq_save(flags);
 	set_c0_config(R5K_CONF_SE);
@@ -68,7 +68,7 @@
 
 static void r5k_sc_disable(void)
 {
-        unsigned long flags;
+	unsigned long flags;
 
 	local_irq_save(flags);
 	blast_r5000_scache();
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 2a7c972..493131c 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -424,7 +424,7 @@
 		write_c0_pagegrain(pg);
 	}
 
-        /* From this point on the ARC firmware is dead.  */
+	/* From this point on the ARC firmware is dead.	 */
 	local_flush_tlb_all();
 
 	/* Did I tell you that ARC SUCKS?  */
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 1c8ac49..820e661 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -5,8 +5,8 @@
  *
  * Synthesize TLB refill handlers at runtime.
  *
- * Copyright (C) 2004, 2005, 2006, 2008  Thiemo Seufer
- * Copyright (C) 2005, 2007, 2008, 2009  Maciej W. Rozycki
+ * Copyright (C) 2004, 2005, 2006, 2008	 Thiemo Seufer
+ * Copyright (C) 2005, 2007, 2008, 2009	 Maciej W. Rozycki
  * Copyright (C) 2006  Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 2008, 2009 Cavium Networks, Inc.
  * Copyright (C) 2011  MIPS Technologies, Inc.
@@ -212,7 +212,7 @@
 /*
  * pgtable bits are assigned dynamically depending on processor feature
  * and statically based on kernel configuration.  This spits out the actual
- * values the kernel is using.  Required to make sense from disassembled
+ * values the kernel is using.	Required to make sense from disassembled
  * TLB exception handlers.
  */
 static void output_pgtable_bits_defines(void)
@@ -464,8 +464,8 @@
  * From the IDT errata for the QED RM5230 (Nevada), processor revision 1.0:
  * 2. A timing hazard exists for the TLBP instruction.
  *
- *      stalling_instruction
- *      TLBP
+ *	stalling_instruction
+ *	TLBP
  *
  * The JTLB is being read for the TLBP throughout the stall generated by the
  * previous instruction. This is not really correct as the stalling instruction
@@ -476,7 +476,7 @@
  * The software work-around is to not allow the instruction preceding the TLBP
  * to stall - make it an NOP or some other instruction guaranteed not to stall.
  *
- * Errata 2 will not be fixed.  This errata is also on the R5000.
+ * Errata 2 will not be fixed.	This errata is also on the R5000.
  *
  * As if we MIPS hackers wouldn't know how to nop pipelines happy ...
  */
@@ -581,6 +581,7 @@
 	case CPU_4KC:
 	case CPU_4KEC:
 	case CPU_M14KC:
+	case CPU_M14KEC:
 	case CPU_SB1:
 	case CPU_SB1A:
 	case CPU_4KSC:
@@ -748,7 +749,7 @@
 	 */
 	small_sequence = (HPAGE_SIZE >> 7) < 0x10000;
 
-	/* We can clobber tmp.  It isn't used after this.*/
+	/* We can clobber tmp.	It isn't used after this.*/
 	if (!small_sequence)
 		uasm_i_lui(p, tmp, HPAGE_SIZE >> (7 + 16));
 
@@ -830,12 +831,12 @@
 		/* Clear lower 23 bits of context. */
 		uasm_i_dins(p, ptr, 0, 0, 23);
 
-		/* 1 0  1 0 1  << 6  xkphys cached */
+		/* 1 0	1 0 1  << 6  xkphys cached */
 		uasm_i_ori(p, ptr, ptr, 0x540);
 		uasm_i_drotr(p, ptr, ptr, 11);
 	}
 #elif defined(CONFIG_SMP)
-# ifdef  CONFIG_MIPS_MT_SMTC
+# ifdef	 CONFIG_MIPS_MT_SMTC
 	/*
 	 * SMTC uses TCBind value as "CPU" index
 	 */
@@ -955,7 +956,7 @@
 
 	/* 32 bit SMP has smp_processor_id() stored in CONTEXT. */
 #ifdef CONFIG_SMP
-#ifdef  CONFIG_MIPS_MT_SMTC
+#ifdef	CONFIG_MIPS_MT_SMTC
 	/*
 	 * SMTC uses TCBind value as "CPU" index
 	 */
@@ -965,7 +966,7 @@
 #else
 	/*
 	 * smp_processor_id() << 3 is stored in CONTEXT.
-         */
+	 */
 	uasm_i_mfc0(p, ptr, C0_CONTEXT);
 	UASM_i_LA_mostly(p, tmp, pgdc);
 	uasm_i_srl(p, ptr, ptr, 23);
@@ -1153,7 +1154,7 @@
 
 	if (pgd_reg == -1) {
 		vmalloc_branch_delay_filled = 1;
-		/* 1 0  1 0 1  << 6  xkphys cached */
+		/* 1 0	1 0 1  << 6  xkphys cached */
 		uasm_i_ori(p, ptr, ptr, 0x540);
 		uasm_i_drotr(p, ptr, ptr, 11);
 	}
@@ -1171,9 +1172,9 @@
 	uasm_l_vmalloc_done(l, *p);
 
 	/*
-	 *                         tmp          ptr
-	 * fall-through case =   badvaddr  *pgd_current
-	 * vmalloc case      =   badvaddr  swapper_pg_dir
+	 *			   tmp		ptr
+	 * fall-through case =	 badvaddr  *pgd_current
+	 * vmalloc case	     =	 badvaddr  swapper_pg_dir
 	 */
 
 	if (vmalloc_branch_delay_filled)
@@ -1212,7 +1213,7 @@
 	uasm_il_bbit1(p, r, scratch, ilog2(_PAGE_HUGE), label_tlb_huge_update);
 	/*
 	 * The in the LWX case we don't want to do the load in the
-	 * delay slot.  It cannot issue in the same cycle and may be
+	 * delay slot.	It cannot issue in the same cycle and may be
 	 * speculative and unneeded.
 	 */
 	if (use_lwx_insns())
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index 39b8910..942ff6c 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -7,7 +7,7 @@
  * support a subset of instructions, and does not try to hide pipeline
  * effects like branch delay slots.
  *
- * Copyright (C) 2004, 2005, 2006, 2008  Thiemo Seufer
+ * Copyright (C) 2004, 2005, 2006, 2008	 Thiemo Seufer
  * Copyright (C) 2005, 2007  Maciej W. Rozycki
  * Copyright (C) 2006  Ralf Baechle (ralf@linux-mips.org)
  */
@@ -119,30 +119,30 @@
 	{ insn_ext, M(spec3_op, 0, 0, 0, 0, ext_op), RS | RT | RD | RE },
 	{ insn_ins, M(spec3_op, 0, 0, 0, 0, ins_op), RS | RT | RD | RE },
 	{ insn_j,  M(j_op, 0, 0, 0, 0, 0),  JIMM },
-	{ insn_jal,  M(jal_op, 0, 0, 0, 0, 0),  JIMM },
+	{ insn_jal,  M(jal_op, 0, 0, 0, 0, 0),	JIMM },
 	{ insn_j,  M(j_op, 0, 0, 0, 0, 0),  JIMM },
 	{ insn_jr,  M(spec_op, 0, 0, 0, 0, jr_op),  RS },
 	{ insn_ld,  M(ld_op, 0, 0, 0, 0, 0),  RS | RT | SIMM },
 	{ insn_ldx, M(spec3_op, 0, 0, 0, ldx_op, lx_op), RS | RT | RD },
-	{ insn_lld,  M(lld_op, 0, 0, 0, 0, 0),  RS | RT | SIMM },
+	{ insn_lld,  M(lld_op, 0, 0, 0, 0, 0),	RS | RT | SIMM },
 	{ insn_ll,  M(ll_op, 0, 0, 0, 0, 0),  RS | RT | SIMM },
-	{ insn_lui,  M(lui_op, 0, 0, 0, 0, 0),  RT | SIMM },
+	{ insn_lui,  M(lui_op, 0, 0, 0, 0, 0),	RT | SIMM },
 	{ insn_lw,  M(lw_op, 0, 0, 0, 0, 0),  RS | RT | SIMM },
 	{ insn_lwx, M(spec3_op, 0, 0, 0, lwx_op, lx_op), RS | RT | RD },
 	{ insn_mfc0,  M(cop0_op, mfc_op, 0, 0, 0, 0),  RT | RD | SET},
 	{ insn_mtc0,  M(cop0_op, mtc_op, 0, 0, 0, 0),  RT | RD | SET},
-	{ insn_ori,  M(ori_op, 0, 0, 0, 0, 0),  RS | RT | UIMM },
+	{ insn_ori,  M(ori_op, 0, 0, 0, 0, 0),	RS | RT | UIMM },
 	{ insn_or,  M(spec_op, 0, 0, 0, 0, or_op),  RS | RT | RD },
 	{ insn_pref,  M(pref_op, 0, 0, 0, 0, 0),  RS | RT | SIMM },
 	{ insn_rfe,  M(cop0_op, cop_op, 0, 0, 0, rfe_op),  0 },
 	{ insn_rotr,  M(spec_op, 1, 0, 0, 0, srl_op),  RT | RD | RE },
-	{ insn_scd,  M(scd_op, 0, 0, 0, 0, 0),  RS | RT | SIMM },
+	{ insn_scd,  M(scd_op, 0, 0, 0, 0, 0),	RS | RT | SIMM },
 	{ insn_sc,  M(sc_op, 0, 0, 0, 0, 0),  RS | RT | SIMM },
 	{ insn_sd,  M(sd_op, 0, 0, 0, 0, 0),  RS | RT | SIMM },
 	{ insn_sll,  M(spec_op, 0, 0, 0, 0, sll_op),  RT | RD | RE },
 	{ insn_sra,  M(spec_op, 0, 0, 0, 0, sra_op),  RT | RD | RE },
 	{ insn_srl,  M(spec_op, 0, 0, 0, 0, srl_op),  RT | RD | RE },
-	{ insn_subu,  M(spec_op, 0, 0, 0, 0, subu_op),  RS | RT | RD },
+	{ insn_subu,  M(spec_op, 0, 0, 0, 0, subu_op),	RS | RT | RD },
 	{ insn_sw,  M(sw_op, 0, 0, 0, 0, 0),  RS | RT | SIMM },
 	{ insn_syscall, M(spec_op, 0, 0, 0, 0, syscall_op), SCIMM},
 	{ insn_tlbp,  M(cop0_op, cop_op, 0, 0, 0, tlbp_op),  0 },
@@ -345,7 +345,7 @@
 }							\
 UASM_EXPORT_SYMBOL(uasm_i##op);
 
-#define I_u2u1msbdu3(op) 				\
+#define I_u2u1msbdu3(op)				\
 Ip_u2u1msbu3(op)					\
 {							\
 	build_insn(buf, insn##op, b, a, d-1, c);	\
diff --git a/arch/mips/mti-malta/malta-amon.c b/arch/mips/mti-malta/malta-amon.c
index 469d9b0..1e47844 100644
--- a/arch/mips/mti-malta/malta-amon.c
+++ b/arch/mips/mti-malta/malta-amon.c
@@ -70,12 +70,12 @@
 	launch->sp = sp;
 	launch->a0 = a0;
 
-	smp_wmb();              /* Target must see parameters before go */
+	smp_wmb();		/* Target must see parameters before go */
 	launch->flags |= LAUNCH_FGO;
-	smp_wmb();              /* Target must see go before we poll  */
+	smp_wmb();		/* Target must see go before we poll  */
 
 	while ((launch->flags & LAUNCH_FGONE) == 0)
 		;
-	smp_rmb();      /* Target will be updating flags soon */
+	smp_rmb();	/* Target will be updating flags soon */
 	pr_debug("launch: cpu%d gone!\n", cpu);
 }
diff --git a/arch/mips/mti-malta/malta-cmdline.c b/arch/mips/mti-malta/malta-cmdline.c
index 1871c30..5576a30 100644
--- a/arch/mips/mti-malta/malta-cmdline.c
+++ b/arch/mips/mti-malta/malta-cmdline.c
@@ -46,7 +46,7 @@
 
 	cp = &(arcs_cmdline[0]);
 	while(actr < prom_argc) {
-	        strcpy(cp, prom_argv(actr));
+		strcpy(cp, prom_argv(actr));
 		cp += strlen(prom_argv(actr));
 		*cp++ = ' ';
 		actr++;
diff --git a/arch/mips/mti-malta/malta-display.c b/arch/mips/mti-malta/malta-display.c
index 7c8828f..9bc58a2 100644
--- a/arch/mips/mti-malta/malta-display.c
+++ b/arch/mips/mti-malta/malta-display.c
@@ -37,10 +37,10 @@
 		display = ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int));
 
 	for (i = 0; i <= 14; i=i+2) {
-	         if (*str)
-		         __raw_writel(*str++, display + i);
+		 if (*str)
+			 __raw_writel(*str++, display + i);
 		 else
-		         __raw_writel(' ', display + i);
+			 __raw_writel(' ', display + i);
 	}
 }
 
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 27a6cdb..c2cbce9 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 1999, 2000, 2004, 2005  MIPS Technologies, Inc.
+ * Copyright (C) 1999, 2000, 2004, 2005	 MIPS Technologies, Inc.
  *	All rights reserved.
  *	Authors: Carsten Langgaard <carstenl@mips.com>
  *		 Maciej W. Rozycki <macro@mips.com>
@@ -110,20 +110,20 @@
 
 int get_ethernet_addr(char *ethernet_addr)
 {
-        char *ethaddr_str;
+	char *ethaddr_str;
 
-        ethaddr_str = prom_getenv("ethaddr");
+	ethaddr_str = prom_getenv("ethaddr");
 	if (!ethaddr_str) {
-	        printk("ethaddr not set in boot prom\n");
+		printk("ethaddr not set in boot prom\n");
 		return -1;
 	}
 	str2eaddr(ethernet_addr, ethaddr_str);
 
 	if (init_debug > 1) {
-	        int i;
+		int i;
 		printk("get_ethernet_addr: ");
-	        for (i=0; i<5; i++)
-		        printk("%02x:", (unsigned char)*(ethernet_addr+i));
+		for (i=0; i<5; i++)
+			printk("%02x:", (unsigned char)*(ethernet_addr+i));
 		printk("%02x\n", *(ethernet_addr+i));
 	}
 
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index 647b863..e364af7 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -84,10 +84,10 @@
 
 		/* Flush Bonito register block */
 		(void) BONITO_PCIMAP_CFG;
-		iob();    /* sync */
+		iob();	  /* sync */
 
 		irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg);
-		iob();    /* sync */
+		iob();	  /* sync */
 		irq &= 0xff;
 		BONITO_PCIMAP_CFG = 0;
 		break;
@@ -136,7 +136,7 @@
 
 	irq = gic_get_int();
 	if (irq < 0)
-		return;  /* interrupt has already been cleared */
+		return;	 /* interrupt has already been cleared */
 
 	do_IRQ(MIPS_GIC_IRQ_BASE + irq);
 }
@@ -149,7 +149,7 @@
 	struct pt_regs *regs = get_irq_regs();
 
 	printk(KERN_EMERG "CoreHI interrupt, shouldn't happen, we die here!\n");
-	printk(KERN_EMERG "epc   : %08lx\nStatus: %08lx\n"
+	printk(KERN_EMERG "epc	 : %08lx\nStatus: %08lx\n"
 			"Cause : %08lx\nbadVaddr : %08lx\n",
 			regs->cp0_epc, regs->cp0_status,
 			regs->cp0_cause, regs->cp0_badvaddr);
@@ -249,20 +249,20 @@
  * on hardware interrupt 0 (MIPS IRQ 2)) like:
  *
  *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        Combined hardware interrupt (hw0)
- *             3        Hardware (ignored)
- *             4        Hardware (ignored)
- *             5        Hardware (ignored)
- *             6        Hardware (ignored)
- *             7        R4k timer (what we use)
+ *	--------	------
+ *	       0	Software (ignored)
+ *	       1	Software (ignored)
+ *	       2	Combined hardware interrupt (hw0)
+ *	       3	Hardware (ignored)
+ *	       4	Hardware (ignored)
+ *	       5	Hardware (ignored)
+ *	       6	Hardware (ignored)
+ *	       7	R4k timer (what we use)
  *
  * We handle the IRQ according to _our_ priority which is:
  *
- * Highest ----     R4k Timer
- * Lowest  ----     Combined hardware interrupt
+ * Highest ----	    R4k Timer
+ * Lowest  ----	    Combined hardware interrupt
  *
  * then we just return, if multiple IRQs are pending then we will just take
  * another exception, big deal.
@@ -396,7 +396,7 @@
 
 static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
 	{ X, X,		   X,		X,		0 },
-	{ X, X,		   X,	 	X,		0 },
+	{ X, X,		   X,		X,		0 },
 	{ X, X,		   X,		X,		0 },
 	{ 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
 	{ 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
@@ -410,7 +410,7 @@
 	{ 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
 	{ 0, GIC_CPU_NMI,  GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
 	{ 0, GIC_CPU_NMI,  GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ X, X,		   X,		X,	        0 },
+	{ X, X,		   X,		X,		0 },
 	/* The remainder of this table is initialised by fill_ipi_map */
 };
 #undef X
@@ -634,7 +634,7 @@
 
 static char *tr[8] = {
 	"mem",	"gcr",	"gic",	"mmio",
-	"0x04",	"0x05",	"0x06",	"0x07"
+	"0x04", "0x05", "0x06", "0x07"
 };
 
 static char *mcmd[32] = {
@@ -673,10 +673,10 @@
 };
 
 static char *core[8] = {
-	"Invalid/OK", 	"Invalid/Data",
+	"Invalid/OK",	"Invalid/Data",
 	"Shared/OK",	"Shared/Data",
 	"Modified/OK",	"Modified/Data",
-	"Exclusive/OK",	"Exclusive/Data"
+	"Exclusive/OK", "Exclusive/Data"
 };
 
 static char *causes[32] = {
diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c
index a96d281..f3d43aa 100644
--- a/arch/mips/mti-malta/malta-memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -47,7 +47,7 @@
 };
 #endif
 
-/* determined physical memory size, not overridden by command line args  */
+/* determined physical memory size, not overridden by command line args	 */
 unsigned long physical_memsize = 0L;
 
 static struct prom_pmemblock * __init prom_getmdesc(void)
@@ -158,7 +158,7 @@
 		size = p->size;
 
 		add_memory_region(base, size, type);
-                p++;
+		p++;
 	}
 }
 
diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c
index 2147cb3..37134dd 100644
--- a/arch/mips/mti-malta/malta-pci.c
+++ b/arch/mips/mti-malta/malta-pci.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 1999, 2000, 2004, 2005  MIPS Technologies, Inc.
+ * Copyright (C) 1999, 2000, 2004, 2005	 MIPS Technologies, Inc.
  *	All rights reserved.
  *	Authors: Carsten Langgaard <carstenl@mips.com>
  *		 Maciej W. Rozycki <macro@mips.com>
@@ -127,7 +127,7 @@
 			map = map1;
 		}
 		mask = ~(start ^ end);
-                /* We don't support remapping with a discontiguous mask.  */
+		/* We don't support remapping with a discontiguous mask.  */
 		BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) &&
 		       mask != ~((mask & -mask) - 1));
 		gt64120_mem_resource.start = start;
@@ -144,7 +144,7 @@
 		map = GT_READ(GT_PCI0IOREMAP_OFS);
 		end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK);
 		mask = ~(start ^ end);
-                /* We don't support remapping with a discontiguous mask.  */
+		/* We don't support remapping with a discontiguous mask.  */
 		BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) &&
 		       mask != ~((mask & -mask) - 1));
 		gt64120_io_resource.start = map & mask;
diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c
index 7473217..132f866 100644
--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -93,7 +93,7 @@
 		.mask_flags =	MTD_WRITEABLE
 	}, {
 		.name =		"User FS",
-		.offset = 	0x100000,
+		.offset =	0x100000,
 		.size =		0x2e0000
 	}, {
 		.name =		"Board Config",
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index 2e28f65..200f64d 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -78,9 +78,9 @@
 }
 
 #if defined(CONFIG_MIPS_MT_SMTC)
-const char display_string[] = "       SMTC LINUX ON MALTA       ";
+const char display_string[] = "	      SMTC LINUX ON MALTA	";
 #else
-const char display_string[] = "        LINUX ON MALTA       ";
+const char display_string[] = "	       LINUX ON MALTA	    ";
 #endif /* CONFIG_MIPS_MT_SMTC */
 
 #ifdef CONFIG_BLK_DEV_FD
diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c
index 1efc8c3..becbf47 100644
--- a/arch/mips/mti-malta/malta-smtc.c
+++ b/arch/mips/mti-malta/malta-smtc.c
@@ -126,7 +126,7 @@
 	 * to the CPU daughterboard, and on the CoreFPGA2/3 34K models,
 	 * that signal is brought to IP2 of both VPEs. To avoid racing
 	 * concurrent interrupt service events, IP2 is enabled only on
-	 * one VPE, by convention VPE0.  So long as no bits are ever
+	 * one VPE, by convention VPE0.	 So long as no bits are ever
 	 * cleared in the affinity mask, there will never be any
 	 * interrupt forwarding.  But as soon as a program or operator
 	 * sets affinity for one of the related IRQs, we need to make
diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c
index 115f5bc..a144b89 100644
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -17,7 +17,6 @@
  *
  * Setting up the clock on the MIPS boards.
  */
-
 #include <linux/types.h>
 #include <linux/i8253.h>
 #include <linux/init.h>
@@ -25,7 +24,6 @@
 #include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
-#include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/mc146818rtc.h>
 
@@ -34,11 +32,11 @@
 #include <asm/hardirq.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
-#include <asm/cpu.h>
 #include <asm/setup.h>
 #include <asm/time.h>
 #include <asm/mc146818-time.h>
 #include <asm/msc01_ic.h>
+#include <asm/gic.h>
 
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/prom.h>
@@ -46,6 +44,7 @@
 #include <asm/mips-boards/maltaint.h>
 
 unsigned long cpu_khz;
+int gic_frequency;
 
 static int mips_cpu_timer_irq;
 static int mips_cpu_perf_irq;
@@ -61,44 +60,50 @@
 	do_IRQ(mips_cpu_perf_irq);
 }
 
-/*
- * Estimate CPU frequency.  Sets mips_hpt_frequency as a side-effect
- */
-static unsigned int __init estimate_cpu_frequency(void)
+static unsigned int freqround(unsigned int freq, unsigned int amount)
 {
-	unsigned int prid = read_c0_prid() & 0xffff00;
-	unsigned int count;
+	freq += amount;
+	freq -= freq % (amount*2);
+	return freq;
+}
 
+/*
+ * Estimate CPU and GIC frequencies.
+ */
+static void __init estimate_frequencies(void)
+{
 	unsigned long flags;
-	unsigned int start;
+	unsigned int count, start;
+	unsigned int giccount = 0, gicstart = 0;
 
 	local_irq_save(flags);
 
-	/* Start counter exactly on falling edge of update flag */
+	/* Start counter exactly on falling edge of update flag. */
 	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
 	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
 
-	/* Start r4k counter. */
+	/* Initialize counters. */
 	start = read_c0_count();
+	if (gic_present)
+		GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), gicstart);
 
-	/* Read counter exactly on falling edge of update flag */
+	/* Read counter exactly on falling edge of update flag. */
 	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
 	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
 
-	count = read_c0_count() - start;
+	count = read_c0_count();
+	if (gic_present)
+		GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), giccount);
 
-	/* restore interrupts */
 	local_irq_restore(flags);
 
+	count -= start;
+	if (gic_present)
+		giccount -= gicstart;
+
 	mips_hpt_frequency = count;
-	if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
-	    (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
-		count *= 2;
-
-	count += 5000;    /* round */
-	count -= count%10000;
-
-	return count;
+	if (gic_present)
+		gic_frequency = giccount;
 }
 
 void read_persistent_clock(struct timespec *ts)
@@ -144,22 +149,34 @@
 
 void __init plat_time_init(void)
 {
-	unsigned int est_freq;
+	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int freq;
 
-        /* Set Data mode - binary. */
-        CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
+	estimate_frequencies();
 
-	est_freq = estimate_cpu_frequency();
+	freq = mips_hpt_frequency;
+	if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
+	    (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
+		freq *= 2;
+	freq = freqround(freq, 5000);
+	pr_debug("CPU frequency %d.%02d MHz\n", freq/1000000,
+	       (freq%1000000)*100/1000000);
+	cpu_khz = freq / 1000;
 
-	printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
-	       (est_freq%1000000)*100/1000000);
+	if (gic_present) {
+		freq = freqround(gic_frequency, 5000);
+		pr_debug("GIC frequency %d.%02d MHz\n", freq/1000000,
+		       (freq%1000000)*100/1000000);
+		gic_clocksource_init(gic_frequency);
+	} else
+		init_r4k_clocksource();
 
-        cpu_khz = est_freq / 1000;
-
-	mips_scroll_message();
-#ifdef CONFIG_I8253		/* Only Malta has a PIT */
+#ifdef CONFIG_I8253
+	/* Only Malta has a PIT. */
 	setup_pit_timer();
 #endif
 
+	mips_scroll_message();
+
 	plat_perf_setup();
 }
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
index 626afeac..10ec701 100644
--- a/arch/mips/mti-sead3/Makefile
+++ b/arch/mips/mti-sead3/Makefile
@@ -5,10 +5,12 @@
 # Copyright (C) 2008 Wind River Systems, Inc.
 #   written by Ralf Baechle <ralf@linux-mips.org>
 #
+# Copyright (C) 2012 MIPS Technoligies, Inc.  All rights reserved.
+# Steven J. Hill <sjhill@mips.com>
+#
 obj-y				:= sead3-lcd.o sead3-cmdline.o \
 				   sead3-display.o sead3-init.o sead3-int.o \
-				   sead3-mtd.o sead3-net.o \
-				   sead3-memory.o sead3-platform.o \
+				   sead3-mtd.o sead3-net.o sead3-platform.o \
 				   sead3-reset.o sead3-setup.o sead3-time.o
 
 obj-y				+= sead3-i2c-dev.o sead3-i2c.o \
@@ -17,3 +19,7 @@
 
 obj-$(CONFIG_EARLY_PRINTK)	+= sead3-console.o
 obj-$(CONFIG_USB_EHCI_HCD)	+= sead3-ehci.o
+obj-$(CONFIG_OF)		+= sead3.dtb.o
+
+$(obj)/%.dtb: $(obj)/%.dts
+	$(call if_changed,dtc)
diff --git a/arch/mips/mti-sead3/leds-sead3.c b/arch/mips/mti-sead3/leds-sead3.c
index a95ac59..322148c 100644
--- a/arch/mips/mti-sead3/leds-sead3.c
+++ b/arch/mips/mti-sead3/leds-sead3.c
@@ -33,12 +33,12 @@
 
 static struct led_classdev sead3_pled = {
 	.name		= "sead3::pled",
-	.brightness_set	= sead3_pled_set,
+	.brightness_set = sead3_pled_set,
 };
 
 static struct led_classdev sead3_fled = {
 	.name		= "sead3::fled",
-	.brightness_set	= sead3_fled_set,
+	.brightness_set = sead3_fled_set,
 };
 
 #ifdef CONFIG_PM
@@ -125,4 +125,3 @@
 MODULE_AUTHOR("Kristian Kielhofner <kris@krisk.org>");
 MODULE_DESCRIPTION("SEAD3 LED driver");
 MODULE_LICENSE("GPL");
-
diff --git a/arch/mips/mti-sead3/sead3-console.c b/arch/mips/mti-sead3/sead3-console.c
index b367391..2ddef19 100644
--- a/arch/mips/mti-sead3/sead3-console.c
+++ b/arch/mips/mti-sead3/sead3-console.c
@@ -10,8 +10,8 @@
 #include <linux/serial_reg.h>
 #include <linux/io.h>
 
-#define SEAD_UART1_REGS_BASE    0xbf000800   /* ttyS1 = DB9 port */
-#define SEAD_UART0_REGS_BASE    0xbf000900   /* ttyS0 = USB port   */
+#define SEAD_UART1_REGS_BASE	0xbf000800   /* ttyS1 = DB9 port */
+#define SEAD_UART0_REGS_BASE	0xbf000900   /* ttyS0 = USB port   */
 #define PORT(base_addr, offset) ((unsigned int __iomem *)(base_addr+(offset)*4))
 
 static char console_port = 1;
diff --git a/arch/mips/mti-sead3/sead3-display.c b/arch/mips/mti-sead3/sead3-display.c
index 8308c7f..e389326 100644
--- a/arch/mips/mti-sead3/sead3-display.c
+++ b/arch/mips/mti-sead3/sead3-display.c
@@ -21,7 +21,7 @@
 #define LCD_SETDDRAM			0x80
 #define LCD_IR_BF			0x80
 
-const char display_string[] = "               LINUX ON SEAD3               ";
+const char display_string[] = "		      LINUX ON SEAD3		   ";
 
 static void scroll_display_message(unsigned long data);
 static DEFINE_TIMER(mips_scroll_timer, scroll_display_message, HZ, 0);
diff --git a/arch/mips/mti-sead3/sead3-i2c-drv.c b/arch/mips/mti-sead3/sead3-i2c-drv.c
index 7aa2225..1f787a6 100644
--- a/arch/mips/mti-sead3/sead3-i2c-drv.c
+++ b/arch/mips/mti-sead3/sead3-i2c-drv.c
@@ -13,32 +13,32 @@
 #include <linux/platform_device.h>
 
 #define PIC32_I2CxCON		0x0000
-#define  PIC32_I2CCON_ON	(1<<15)
-#define  PIC32_I2CCON_ACKDT	(1<<5)
-#define  PIC32_I2CCON_ACKEN	(1<<4)
-#define  PIC32_I2CCON_RCEN	(1<<3)
-#define  PIC32_I2CCON_PEN	(1<<2)
-#define  PIC32_I2CCON_RSEN	(1<<1)
-#define  PIC32_I2CCON_SEN	(1<<0)
+#define	 PIC32_I2CCON_ON	(1<<15)
+#define	 PIC32_I2CCON_ACKDT	(1<<5)
+#define	 PIC32_I2CCON_ACKEN	(1<<4)
+#define	 PIC32_I2CCON_RCEN	(1<<3)
+#define	 PIC32_I2CCON_PEN	(1<<2)
+#define	 PIC32_I2CCON_RSEN	(1<<1)
+#define	 PIC32_I2CCON_SEN	(1<<0)
 #define PIC32_I2CxCONCLR	0x0004
 #define PIC32_I2CxCONSET	0x0008
 #define PIC32_I2CxSTAT		0x0010
 #define PIC32_I2CxSTATCLR	0x0014
-#define  PIC32_I2CSTAT_ACKSTAT	(1<<15)
-#define  PIC32_I2CSTAT_TRSTAT	(1<<14)
-#define  PIC32_I2CSTAT_BCL	(1<<10)
-#define  PIC32_I2CSTAT_IWCOL	(1<<7)
-#define  PIC32_I2CSTAT_I2COV	(1<<6)
+#define	 PIC32_I2CSTAT_ACKSTAT	(1<<15)
+#define	 PIC32_I2CSTAT_TRSTAT	(1<<14)
+#define	 PIC32_I2CSTAT_BCL	(1<<10)
+#define	 PIC32_I2CSTAT_IWCOL	(1<<7)
+#define	 PIC32_I2CSTAT_I2COV	(1<<6)
 #define PIC32_I2CxBRG		0x0040
 #define PIC32_I2CxTRN		0x0050
 #define PIC32_I2CxRCV		0x0060
 
 static DEFINE_SPINLOCK(pic32_bus_lock);
 
-static void __iomem *bus_xfer   = (void __iomem *)0xbf000600;
+static void __iomem *bus_xfer	= (void __iomem *)0xbf000600;
 static void __iomem *bus_status = (void __iomem *)0xbf000060;
 
-#define DELAY()	udelay(100)
+#define DELAY() udelay(100)
 
 static inline unsigned int ioready(void)
 {
diff --git a/arch/mips/mti-sead3/sead3-init.c b/arch/mips/mti-sead3/sead3-init.c
index a958cad..f95abaa 100644
--- a/arch/mips/mti-sead3/sead3-init.c
+++ b/arch/mips/mti-sead3/sead3-init.c
@@ -77,7 +77,6 @@
 	board_ejtag_handler_setup = mips_ejtag_setup;
 
 	prom_init_cmdline();
-	prom_meminit();
 #ifdef CONFIG_EARLY_PRINTK
 	if ((strstr(prom_getcmdline(), "console=ttyS0")) != NULL)
 		prom_init_early_console(0);
@@ -89,3 +88,7 @@
 		strcat(prom_getcmdline(), " console=ttyS0,38400n8r");
 #endif
 }
+
+void prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/mti-sead3/sead3-memory.c b/arch/mips/mti-sead3/sead3-memory.c
deleted file mode 100644
index da92441..0000000
--- a/arch/mips/mti-sead3/sead3-memory.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/bootmem.h>
-
-#include <asm/bootinfo.h>
-#include <asm/sections.h>
-#include <asm/mips-boards/prom.h>
-
-enum yamon_memtypes {
-	yamon_dontuse,
-	yamon_prom,
-	yamon_free,
-};
-
-static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
-
-/* determined physical memory size, not overridden by command line args  */
-unsigned long physical_memsize = 0L;
-
-struct prom_pmemblock * __init prom_getmdesc(void)
-{
-	char *memsize_str, *ptr;
-	unsigned int memsize;
-	static char cmdline[COMMAND_LINE_SIZE] __initdata;
-	long val;
-	int tmp;
-
-	/* otherwise look in the environment */
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str) {
-		pr_warn("memsize not set in boot prom, set to default 32Mb\n");
-		physical_memsize = 0x02000000;
-	} else {
-		tmp = kstrtol(memsize_str, 0, &val);
-		physical_memsize = (unsigned long)val;
-	}
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	/* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last
-	   word of physical memory */
-	physical_memsize -= PAGE_SIZE;
-#endif
-
-	/* Check the command line for a memsize directive that overrides
-	   the physical/default amount */
-	strcpy(cmdline, arcs_cmdline);
-	ptr = strstr(cmdline, "memsize=");
-	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
-		ptr = strstr(ptr, " memsize=");
-
-	if (ptr)
-		memsize = memparse(ptr + 8, &ptr);
-	else
-		memsize = physical_memsize;
-
-	memset(mdesc, 0, sizeof(mdesc));
-
-	mdesc[0].type = yamon_dontuse;
-	mdesc[0].base = 0x00000000;
-	mdesc[0].size = 0x00001000;
-
-	mdesc[1].type = yamon_prom;
-	mdesc[1].base = 0x00001000;
-	mdesc[1].size = 0x000ef000;
-
-	/*
-	 * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the
-	 * south bridge and PCI access always forwarded to the ISA Bus and
-	 * BIOSCS# is always generated.
-	 * This mean that this area can't be used as DMA memory for PCI
-	 * devices.
-	 */
-	mdesc[2].type = yamon_dontuse;
-	mdesc[2].base = 0x000f0000;
-	mdesc[2].size = 0x00010000;
-
-	mdesc[3].type = yamon_dontuse;
-	mdesc[3].base = 0x00100000;
-	mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) -
-		mdesc[3].base;
-
-	mdesc[4].type = yamon_free;
-	mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end));
-	mdesc[4].size = memsize - mdesc[4].base;
-
-	return &mdesc[0];
-}
-
-static int __init prom_memtype_classify(unsigned int type)
-{
-	switch (type) {
-	case yamon_free:
-		return BOOT_MEM_RAM;
-	case yamon_prom:
-		return BOOT_MEM_ROM_DATA;
-	default:
-		return BOOT_MEM_RESERVED;
-	}
-}
-
-void __init prom_meminit(void)
-{
-	struct prom_pmemblock *p;
-
-	p = prom_getmdesc();
-
-	while (p->size) {
-		long type;
-		unsigned long base, size;
-
-		type = prom_memtype_classify(p->type);
-		base = p->base;
-		size = p->size;
-
-		add_memory_region(base, size, type);
-		p++;
-	}
-}
-
-void __init prom_free_prom_memory(void)
-{
-	unsigned long addr;
-	int i;
-
-	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
-			continue;
-
-		addr = boot_mem_map.map[i].addr;
-		free_init_pages("prom memory",
-				addr, addr + boot_mem_map.map[i].size);
-	}
-}
diff --git a/arch/mips/mti-sead3/sead3-net.c b/arch/mips/mti-sead3/sead3-net.c
index 04d704d..dd11e7e 100644
--- a/arch/mips/mti-sead3/sead3-net.c
+++ b/arch/mips/mti-sead3/sead3-net.c
@@ -19,8 +19,8 @@
 
 struct resource sead3_net_resourcess[] = {
 	{
-		.start                  = 0x1f010000,
-		.end                    = 0x1f01ffff,
+		.start			= 0x1f010000,
+		.end			= 0x1f01ffff,
 		.flags			= IORESOURCE_MEM
 	},
 	{
diff --git a/arch/mips/mti-sead3/sead3-pic32-bus.c b/arch/mips/mti-sead3/sead3-pic32-bus.c
index 9f0d89b..eb2bf93 100644
--- a/arch/mips/mti-sead3/sead3-pic32-bus.c
+++ b/arch/mips/mti-sead3/sead3-pic32-bus.c
@@ -17,16 +17,16 @@
 #define PIC32_SYSRD	0x02
 #define PIC32_WR	0x10
 #define PIC32_SYSWR	0x20
-#define PIC32_IRQ_CLR   0x40
+#define PIC32_IRQ_CLR	0x40
 #define PIC32_STATUS	0x80
 
-#define DELAY()	udelay(100)	/* FIXME: needed? */
+#define DELAY() udelay(100)	/* FIXME: needed? */
 
 /* spinlock to ensure atomic access to PIC32 */
 static DEFINE_SPINLOCK(pic32_bus_lock);
 
 /* FIXME: io_remap these */
-static void __iomem *bus_xfer   = (void __iomem *)0xbf000600;
+static void __iomem *bus_xfer	= (void __iomem *)0xbf000600;
 static void __iomem *bus_status = (void __iomem *)0xbf000060;
 
 static inline unsigned int ioready(void)
diff --git a/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c b/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c
index 514675e..b921e5ec 100644
--- a/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c
+++ b/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c
@@ -19,40 +19,40 @@
 #define PIC32_I2CxCONCLR	0x0004
 #define PIC32_I2CxCONSET	0x0008
 #define PIC32_I2CxCONINV	0x000C
-#define  I2CCON_ON		(1<<15)
-#define  I2CCON_FRZ		(1<<14)
-#define  I2CCON_SIDL		(1<<13)
-#define  I2CCON_SCLREL		(1<<12)
-#define  I2CCON_STRICT		(1<<11)
-#define  I2CCON_A10M		(1<<10)
-#define  I2CCON_DISSLW		(1<<9)
-#define  I2CCON_SMEN		(1<<8)
-#define  I2CCON_GCEN		(1<<7)
-#define  I2CCON_STREN		(1<<6)
-#define  I2CCON_ACKDT		(1<<5)
-#define  I2CCON_ACKEN		(1<<4)
-#define  I2CCON_RCEN		(1<<3)
-#define  I2CCON_PEN		(1<<2)
-#define  I2CCON_RSEN		(1<<1)
-#define  I2CCON_SEN		(1<<0)
+#define	 I2CCON_ON		(1<<15)
+#define	 I2CCON_FRZ		(1<<14)
+#define	 I2CCON_SIDL		(1<<13)
+#define	 I2CCON_SCLREL		(1<<12)
+#define	 I2CCON_STRICT		(1<<11)
+#define	 I2CCON_A10M		(1<<10)
+#define	 I2CCON_DISSLW		(1<<9)
+#define	 I2CCON_SMEN		(1<<8)
+#define	 I2CCON_GCEN		(1<<7)
+#define	 I2CCON_STREN		(1<<6)
+#define	 I2CCON_ACKDT		(1<<5)
+#define	 I2CCON_ACKEN		(1<<4)
+#define	 I2CCON_RCEN		(1<<3)
+#define	 I2CCON_PEN		(1<<2)
+#define	 I2CCON_RSEN		(1<<1)
+#define	 I2CCON_SEN		(1<<0)
 
 #define PIC32_I2CxSTAT		0x0010
 #define PIC32_I2CxSTATCLR	0x0014
 #define PIC32_I2CxSTATSET	0x0018
 #define PIC32_I2CxSTATINV	0x001C
-#define  I2CSTAT_ACKSTAT	(1<<15)
-#define  I2CSTAT_TRSTAT		(1<<14)
-#define  I2CSTAT_BCL		(1<<10)
-#define  I2CSTAT_GCSTAT		(1<<9)
-#define  I2CSTAT_ADD10		(1<<8)
-#define  I2CSTAT_IWCOL		(1<<7)
-#define  I2CSTAT_I2COV		(1<<6)
-#define  I2CSTAT_DA		(1<<5)
-#define  I2CSTAT_P		(1<<4)
-#define  I2CSTAT_S		(1<<3)
-#define  I2CSTAT_RW		(1<<2)
-#define  I2CSTAT_RBF		(1<<1)
-#define  I2CSTAT_TBF		(1<<0)
+#define	 I2CSTAT_ACKSTAT	(1<<15)
+#define	 I2CSTAT_TRSTAT		(1<<14)
+#define	 I2CSTAT_BCL		(1<<10)
+#define	 I2CSTAT_GCSTAT		(1<<9)
+#define	 I2CSTAT_ADD10		(1<<8)
+#define	 I2CSTAT_IWCOL		(1<<7)
+#define	 I2CSTAT_I2COV		(1<<6)
+#define	 I2CSTAT_DA		(1<<5)
+#define	 I2CSTAT_P		(1<<4)
+#define	 I2CSTAT_S		(1<<3)
+#define	 I2CSTAT_RW		(1<<2)
+#define	 I2CSTAT_RBF		(1<<1)
+#define	 I2CSTAT_TBF		(1<<0)
 
 #define PIC32_I2CxADD		0x0020
 #define PIC32_I2CxADDCLR	0x0024
diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c
index 8ad46ad..f012fd1 100644
--- a/arch/mips/mti-sead3/sead3-setup.c
+++ b/arch/mips/mti-sead3/sead3-setup.c
@@ -6,6 +6,12 @@
  * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
  */
 #include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
+#include <linux/bootmem.h>
+
+#include <asm/mips-boards/generic.h>
+#include <asm/prom.h>
 
 int coherentio;		/* 0 => no DMA cache coherency (may be set by user) */
 int hw_coherentio;	/* 0 => no HW DMA cache coherency (reflects real HW) */
@@ -17,4 +23,25 @@
 
 void __init plat_mem_setup(void)
 {
+	/*
+	 * Load the builtin devicetree. This causes the chosen node to be
+	 * parsed resulting in our memory appearing
+	 */
+	__dt_setup_arch(&__dtb_start);
+}
+
+void __init device_tree_init(void)
+{
+	unsigned long base, size;
+
+	if (!initial_boot_params)
+		return;
+
+	base = virt_to_phys((void *)initial_boot_params);
+	size = be32_to_cpu(initial_boot_params->totalsize);
+
+	/* Before we do anything, lets reserve the dt blob */
+	reserve_bootmem(base, size, BOOTMEM_DEFAULT);
+
+	unflatten_device_tree();
 }
diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c
index 048e781..239e4e3 100644
--- a/arch/mips/mti-sead3/sead3-time.c
+++ b/arch/mips/mti-sead3/sead3-time.c
@@ -43,11 +43,11 @@
 
 	local_irq_save(flags);
 
-	orig = readl(status_reg) & 0x2;               /* get original sample */
+	orig = readl(status_reg) & 0x2;		      /* get original sample */
 	/* wait for transition */
 	while ((readl(status_reg) & 0x2) == orig)
 		;
-	orig = orig ^ 0x2;                            /* flip the bit */
+	orig = orig ^ 0x2;			      /* flip the bit */
 
 	write_c0_count(0);
 
@@ -56,7 +56,7 @@
 		/* wait for transition */
 		while ((readl(status_reg) & 0x2) == orig)
 			;
-		orig = orig ^ 0x2;                            /* flip the bit */
+		orig = orig ^ 0x2;			      /* flip the bit */
 		tick++;
 	}
 
@@ -71,7 +71,7 @@
 		(prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
 		freq *= 2;
 
-	freq += 5000;        /* rounding */
+	freq += 5000;	     /* rounding */
 	freq -= freq%10000;
 
 	return freq ;
diff --git a/arch/mips/mti-sead3/sead3.dts b/arch/mips/mti-sead3/sead3.dts
new file mode 100644
index 0000000..658f437
--- /dev/null
+++ b/arch/mips/mti-sead3/sead3.dts
@@ -0,0 +1,26 @@
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00001000;	// reserved
+/memreserve/ 0x00001000 0x000ef000;	// ROM data
+/memreserve/ 0x000f0000 0x004cc000;	// reserved
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mti,sead-3";
+
+	cpus {
+		cpu@0 {
+			compatible = "mti,mips14KEc", "mti,mips14Kc";
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS1,38400 rootdelay=10 root=/dev/sda3";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform
index cdfc9ab..fb8eb4c 100644
--- a/arch/mips/netlogic/Platform
+++ b/arch/mips/netlogic/Platform
@@ -13,5 +13,5 @@
 #
 # NETLOGIC processor support
 #
-platform-$(CONFIG_NLM_COMMON)  	+= netlogic/
-load-$(CONFIG_NLM_COMMON)  	+= 0xffffffff80100000
+platform-$(CONFIG_NLM_COMMON)	+= netlogic/
+load-$(CONFIG_NLM_COMMON)	+= 0xffffffff80100000
diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c
index 00dcc7a..9f84c60 100644
--- a/arch/mips/netlogic/common/irq.c
+++ b/arch/mips/netlogic/common/irq.c
@@ -69,7 +69,7 @@
 #else
 #define SMP_IRQ_MASK	0
 #endif
-#define PERCPU_IRQ_MASK	(SMP_IRQ_MASK | (1ull << IRQ_TIMER) | \
+#define PERCPU_IRQ_MASK (SMP_IRQ_MASK | (1ull << IRQ_TIMER) | \
 				(1ull << IRQ_FMN))
 
 struct nlm_pic_irq {
@@ -105,21 +105,23 @@
 static void xlp_pic_mask_ack(struct irq_data *d)
 {
 	struct nlm_pic_irq *pd = irq_data_get_irq_handler_data(d);
-	uint64_t mask = 1ull << pd->picirq;
 
-	write_c0_eirr(mask);            /* ack by writing EIRR */
+	clear_c0_eimr(pd->picirq);
+	ack_c0_eirr(pd->picirq);
 }
 
 static void xlp_pic_unmask(struct irq_data *d)
 {
 	struct nlm_pic_irq *pd = irq_data_get_irq_handler_data(d);
 
-	if (!pd)
-		return;
+	BUG_ON(!pd);
 
 	if (pd->extra_ack)
 		pd->extra_ack(d);
 
+	/* re-enable the intr on this cpu */
+	set_c0_eimr(pd->picirq);
+
 	/* Ack is a single write, no need to lock */
 	nlm_pic_ack(pd->node->picbase, pd->irt);
 }
@@ -134,32 +136,17 @@
 
 static void cpuintr_disable(struct irq_data *d)
 {
-	uint64_t eimr;
-	uint64_t mask = 1ull << d->irq;
-
-	eimr = read_c0_eimr();
-	write_c0_eimr(eimr & ~mask);
+	clear_c0_eimr(d->irq);
 }
 
 static void cpuintr_enable(struct irq_data *d)
 {
-	uint64_t eimr;
-	uint64_t mask = 1ull << d->irq;
-
-	eimr = read_c0_eimr();
-	write_c0_eimr(eimr | mask);
+	set_c0_eimr(d->irq);
 }
 
 static void cpuintr_ack(struct irq_data *d)
 {
-	uint64_t mask = 1ull << d->irq;
-
-	write_c0_eirr(mask);
-}
-
-static void cpuintr_nop(struct irq_data *d)
-{
-	WARN(d->irq >= PIC_IRQ_BASE, "Bad irq %d", d->irq);
+	ack_c0_eirr(d->irq);
 }
 
 /*
@@ -170,9 +157,9 @@
 	.name		= "XLP-CPU-INTR",
 	.irq_enable	= cpuintr_enable,
 	.irq_disable	= cpuintr_disable,
-	.irq_mask	= cpuintr_nop,
-	.irq_ack	= cpuintr_nop,
-	.irq_eoi	= cpuintr_ack,
+	.irq_mask	= cpuintr_disable,
+	.irq_ack	= cpuintr_ack,
+	.irq_eoi	= cpuintr_enable,
 };
 
 static void __init nlm_init_percpu_irqs(void)
@@ -230,7 +217,7 @@
 		nlm_setup_pic_irq(node, i, i, irt);
 		/* set interrupts to first cpu in node */
 		nlm_pic_init_irt(nodep->picbase, irt, i,
-					node * NLM_CPUS_PER_NODE);
+					node * NLM_CPUS_PER_NODE, 0);
 		irqmask |= (1ull << i);
 	}
 	nodep->irqmask = irqmask;
@@ -265,7 +252,7 @@
 	int i, node;
 
 	node = nlm_nodeid();
-	eirr = read_c0_eirr() & read_c0_eimr();
+	eirr = read_c0_eirr_and_eimr();
 
 	i = __ilog2_u64(eirr);
 	if (i == -1)
diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c
index a080d9e..2bb95dcf 100644
--- a/arch/mips/netlogic/common/smp.c
+++ b/arch/mips/netlogic/common/smp.c
@@ -84,15 +84,19 @@
 /* IRQ_IPI_SMP_FUNCTION Handler */
 void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc)
 {
-	write_c0_eirr(1ull << irq);
+	clear_c0_eimr(irq);
+	ack_c0_eirr(irq);
 	smp_call_function_interrupt();
+	set_c0_eimr(irq);
 }
 
 /* IRQ_IPI_SMP_RESCHEDULE  handler */
 void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc)
 {
-	write_c0_eirr(1ull << irq);
+	clear_c0_eimr(irq);
+	ack_c0_eirr(irq);
 	scheduler_ipi();
+	set_c0_eimr(irq);
 }
 
 /*
diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S
index a0b7487..0265174 100644
--- a/arch/mips/netlogic/common/smpboot.S
+++ b/arch/mips/netlogic/common/smpboot.S
@@ -49,12 +49,12 @@
 #include <asm/netlogic/xlp-hal/sys.h>
 #include <asm/netlogic/xlp-hal/cpucontrol.h>
 
-#define	CP0_EBASE	$15
+#define CP0_EBASE	$15
 #define SYS_CPU_COHERENT_BASE(node)	CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
 			XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
 			SYS_CPU_NONCOHERENT_MODE * 4
 
-#define	XLP_AX_WORKAROUND	/* enable Ax silicon workarounds */
+#define XLP_AX_WORKAROUND	/* enable Ax silicon workarounds */
 
 /* Enable XLP features and workarounds in the LSU */
 .macro xlp_config_lsu
@@ -69,6 +69,12 @@
 #endif
 	mtcr	t1, t0
 
+	li	t0, ICU_DEFEATURE
+	mfcr	t1, t0
+	ori	t1, 0x1000	/* Enable Icache partitioning */
+	mtcr	t1, t0
+
+
 #ifdef XLP_AX_WORKAROUND
 	li	t0, SCHED_DEFEATURE
 	lui	t1, 0x0100	/* Disable BRU accepting ALU ops */
@@ -85,7 +91,7 @@
 	li	t0, LSU_DEBUG_DATA0
 	li	t1, LSU_DEBUG_ADDR
 	li	t2, 0		/* index */
-	li 	t3, 0x1000	/* loop count */
+	li	t3, 0x1000	/* loop count */
 1:
 	sll	v0, t2, 5
 	mtcr	zero, t0
@@ -134,7 +140,7 @@
 	and	k1, k0, k1
 	beqz	k1, 1f		/* go to real reset entry */
 	nop
-	li	k1, CKSEG1ADDR(RESET_DATA_PHYS)	/* NMI */
+	li	k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */
 	ld	k0, BOOT_NMI_HANDLER(k1)
 	jr	k0
 	nop
@@ -235,7 +241,7 @@
 
 FEXPORT(xlp_boot_core0_siblings)	/* "Master" cpu starts from here */
 	xlp_config_lsu
-	dmtc0   sp, $4, 2		/* SP saved in UserLocal */
+	dmtc0	sp, $4, 2		/* SP saved in UserLocal */
 	SAVE_ALL
 	sync
 	/* find the location to which nlm_boot_siblings was relocated */
@@ -301,13 +307,13 @@
 	 */
 	li	t0, 0x400
 	mfcr	t1, t0
-	li	t2, 6 		/* XLR thread mode mask */
+	li	t2, 6		/* XLR thread mode mask */
 	nor	t3, t2, zero
 	and	t2, t1, t2	/* t2 - current thread mode */
 	li	v0, CKSEG1ADDR(RESET_DATA_PHYS)
 	lw	v1, BOOT_THREAD_MODE(v0) /* v1 - new thread mode */
 	sll	v1, 1
-	beq	v1, t2, 1f 	/* same as request value */
+	beq	v1, t2, 1f	/* same as request value */
 	nop			/* nothing to do */
 
 	and	t2, t1, t3	/* mask out old thread mode */
diff --git a/arch/mips/netlogic/common/time.c b/arch/mips/netlogic/common/time.c
index bd3e498..5c56555 100644
--- a/arch/mips/netlogic/common/time.c
+++ b/arch/mips/netlogic/common/time.c
@@ -35,17 +35,73 @@
 #include <linux/init.h>
 
 #include <asm/time.h>
+#include <asm/cpu-features.h>
+
 #include <asm/netlogic/interrupt.h>
 #include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+
+#if defined(CONFIG_CPU_XLP)
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#elif defined(CONFIG_CPU_XLR)
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/xlr.h>
+#else
+#error "Unknown CPU"
+#endif
 
 unsigned int __cpuinit get_c0_compare_int(void)
 {
 	return IRQ_TIMER;
 }
 
+static cycle_t nlm_get_pic_timer(struct clocksource *cs)
+{
+	uint64_t picbase = nlm_get_node(0)->picbase;
+
+	return ~nlm_pic_read_timer(picbase, PIC_CLOCK_TIMER);
+}
+
+static cycle_t nlm_get_pic_timer32(struct clocksource *cs)
+{
+	uint64_t picbase = nlm_get_node(0)->picbase;
+
+	return ~nlm_pic_read_timer32(picbase, PIC_CLOCK_TIMER);
+}
+
+static struct clocksource csrc_pic = {
+	.name		= "PIC",
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void nlm_init_pic_timer(void)
+{
+	uint64_t picbase = nlm_get_node(0)->picbase;
+
+	nlm_pic_set_timer(picbase, PIC_CLOCK_TIMER, ~0ULL, 0, 0);
+	if (current_cpu_data.cputype == CPU_XLR) {
+		csrc_pic.mask	= CLOCKSOURCE_MASK(32);
+		csrc_pic.read	= nlm_get_pic_timer32;
+	} else {
+		csrc_pic.mask	= CLOCKSOURCE_MASK(64);
+		csrc_pic.read	= nlm_get_pic_timer;
+	}
+	csrc_pic.rating = 1000;
+	clocksource_register_hz(&csrc_pic, PIC_CLK_HZ);
+}
+
 void __init plat_time_init(void)
 {
+	nlm_init_pic_timer();
 	mips_hpt_frequency = nlm_get_cpu_frequency();
+	if (current_cpu_type() == CPU_XLR)
+		preset_lpj = mips_hpt_frequency / (3 * HZ);
+	else
+		preset_lpj = mips_hpt_frequency / (2 * HZ);
 	pr_info("MIPS counter frequency [%ld]\n",
 			(unsigned long)mips_hpt_frequency);
 }
diff --git a/arch/mips/netlogic/dts/xlp_evp.dts b/arch/mips/netlogic/dts/xlp_evp.dts
index e14f423..7628b54 100644
--- a/arch/mips/netlogic/dts/xlp_evp.dts
+++ b/arch/mips/netlogic/dts/xlp_evp.dts
@@ -20,7 +20,7 @@
 		#address-cells = <2>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
+		ranges = <0 0  0 0x18000000  0x04000000	  // PCIe CFG
 			  1 0  0 0x16000000  0x01000000>; // GBU chipselects
 
 		serial0: serial@30000 {
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
index 529e747..c68fd40 100644
--- a/arch/mips/netlogic/xlp/nlm_hal.c
+++ b/arch/mips/netlogic/xlp/nlm_hal.c
@@ -111,8 +111,8 @@
 	dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE);
 	pll_divf = ((rstval >> 10) & 0x7f) + 1;
 	pll_divr = ((rstval >> 8)  & 0x3) + 1;
-	ext_div  = ((rstval >> 30) & 0x3) + 1;
-	dfs_div  = ((dfsval >> (core * 4)) & 0xf) + 1;
+	ext_div	 = ((rstval >> 30) & 0x3) + 1;
+	dfs_div	 = ((dfsval >> (core * 4)) & 0xf) + 1;
 
 	num = 800000000ULL * pll_divf;
 	denom = 3 * pll_divr * ext_div * dfs_div;
diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c
index dbe083a..1d0b66c 100644
--- a/arch/mips/netlogic/xlp/usb-init.c
+++ b/arch/mips/netlogic/xlp/usb-init.c
@@ -52,7 +52,7 @@
 	port_addr = nlm_get_usb_regbase(node, port);
 	val = nlm_read_usb_reg(port_addr, USB_INT_EN);
 	val = USB_CTRL_INTERRUPT_EN  | USB_OHCI_INTERRUPT_EN |
-		USB_OHCI_INTERRUPT1_EN | USB_CTRL_INTERRUPT_EN  |
+		USB_OHCI_INTERRUPT1_EN | USB_CTRL_INTERRUPT_EN	|
 		USB_OHCI_INTERRUPT_EN | USB_OHCI_INTERRUPT2_EN;
 	nlm_write_usb_reg(port_addr, USB_INT_EN, val);
 }
diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c
index cb90106..abb3e08 100644
--- a/arch/mips/netlogic/xlp/wakeup.c
+++ b/arch/mips/netlogic/xlp/wakeup.c
@@ -51,7 +51,7 @@
 #include <asm/netlogic/xlp-hal/xlp.h>
 #include <asm/netlogic/xlp-hal/sys.h>
 
-static int xlp_wakeup_core(uint64_t sysbase, int core)
+static int xlp_wakeup_core(uint64_t sysbase, int node, int core)
 {
 	uint32_t coremask, value;
 	int count;
@@ -82,36 +82,51 @@
 	struct nlm_soc_info *nodep;
 	uint64_t syspcibase;
 	uint32_t syscoremask;
-	int core, n, cpu;
+	int core, n, cpu, count, val;
 
 	for (n = 0; n < NLM_NR_NODES; n++) {
 		syspcibase = nlm_get_sys_pcibase(n);
 		if (nlm_read_reg(syspcibase, 0) == 0xffffffff)
 			break;
 
-		/* read cores in reset from SYS and account for boot cpu */
-		nlm_node_init(n);
+		/* read cores in reset from SYS */
+		if (n != 0)
+			nlm_node_init(n);
 		nodep = nlm_get_node(n);
 		syscoremask = nlm_read_sys_reg(nodep->sysbase, SYS_CPU_RESET);
-		if (n == 0)
+		/* The boot cpu */
+		if (n == 0) {
 			syscoremask |= 1;
+			nodep->coremask = 1;
+		}
 
 		for (core = 0; core < NLM_CORES_PER_NODE; core++) {
+			/* we will be on node 0 core 0 */
+			if (n == 0 && core == 0)
+				continue;
+
 			/* see if the core exists */
 			if ((syscoremask & (1 << core)) == 0)
 				continue;
 
-			/* see if at least the first thread is enabled */
+			/* see if at least the first hw thread is enabled */
 			cpu = (n * NLM_CORES_PER_NODE + core)
 						* NLM_THREADS_PER_CORE;
 			if (!cpumask_test_cpu(cpu, wakeup_mask))
 				continue;
 
 			/* wake up the core */
-			if (xlp_wakeup_core(nodep->sysbase, core))
-				nodep->coremask |= 1u << core;
-			else
-				pr_err("Failed to enable core %d\n", core);
+			if (!xlp_wakeup_core(nodep->sysbase, n, core))
+				continue;
+
+			/* core is up */
+			nodep->coremask |= 1u << core;
+
+			/* spin until the first hw thread sets its ready */
+			count = 0x20000000;
+			do {
+				val = *(volatile int *)&nlm_cpu_ready[cpu];
+			} while (val == 0 && --count > 0);
 		}
 	}
 }
diff --git a/arch/mips/netlogic/xlr/fmn-config.c b/arch/mips/netlogic/xlr/fmn-config.c
index bed2cff..ed3bf0e 100644
--- a/arch/mips/netlogic/xlr/fmn-config.c
+++ b/arch/mips/netlogic/xlr/fmn-config.c
@@ -164,8 +164,8 @@
 	int i, j;
 
 	for (i = 0; i < num_core; i++) {
-		cpu[i].start_stn_id     = (8 * i);
-		cpu[i].end_stn_id       = (8 * i + 8);
+		cpu[i].start_stn_id	= (8 * i);
+		cpu[i].end_stn_id	= (8 * i + 8);
 
 		for (j = cpu[i].start_stn_id; j < cpu[i].end_stn_id; j++)
 			xlr_board_fmn_config.bucket_size[j] = 32;
@@ -216,6 +216,8 @@
 	case PRID_IMP_NETLOGIC_XLS404B:
 	case PRID_IMP_NETLOGIC_XLS408B:
 	case PRID_IMP_NETLOGIC_XLS416B:
+	case PRID_IMP_NETLOGIC_XLS608B:
+	case PRID_IMP_NETLOGIC_XLS616B:
 		setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
 					FMN_STNID_GMAC0_TX3, 8, 8, 32);
 		setup_fmn_cc(&gmac[1], FMN_STNID_GMAC1_FR_0,
diff --git a/arch/mips/netlogic/xlr/platform-flash.c b/arch/mips/netlogic/xlr/platform-flash.c
index 340ab16..6d3c727 100644
--- a/arch/mips/netlogic/xlr/platform-flash.c
+++ b/arch/mips/netlogic/xlr/platform-flash.c
@@ -36,7 +36,7 @@
 	{
 		.name = "User FS",
 		.offset = 0x800000,
-		.size   = MTDPART_SIZ_FULL,
+		.size	= MTDPART_SIZ_FULL,
 	}
 };
 
@@ -46,13 +46,13 @@
 static struct mtd_partition xlr_nand_parts[] = {
 	{
 		.name	= "Root Filesystem",
-		.offset	= 64 * 64 * 2048,
+		.offset = 64 * 64 * 2048,
 		.size	= 432 * 64 * 2048,
 	},
 	{
 		.name	= "Home Filesystem",
-		.offset	= MTDPART_OFS_APPEND,
-		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
 	},
 };
 
@@ -74,8 +74,8 @@
 	.dev	= {
 		.platform_data	= &xlr_nor_data,
 	},
-	.num_resources  = ARRAY_SIZE(xlr_nor_res),
-	.resource       = xlr_nor_res,
+	.num_resources	= ARRAY_SIZE(xlr_nor_res),
+	.resource	= xlr_nor_res,
 };
 
 const char *xlr_part_probes[] = { "cmdlinepart", NULL };
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
index 507230e..7b96a91 100644
--- a/arch/mips/netlogic/xlr/platform.c
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -64,7 +64,7 @@
 		.iotype		= UPIO_MEM32,		\
 		.flags		= (UPF_SKIP_TEST |	\
 			 UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\
-		.uartclk	= PIC_CLKS_PER_SEC,	\
+		.uartclk	= PIC_CLK_HZ,		\
 		.type		= PORT_16550A,		\
 		.serial_in	= nlm_xlr_uart_in,	\
 		.serial_out	= nlm_xlr_uart_out,	\
@@ -162,18 +162,18 @@
 	nlm_write_reg(usb_mmio, 50, 0x1f000000);
 
 	/* Enable ports */
-	nlm_write_reg(usb_mmio,  1, 0x07000500);
+	nlm_write_reg(usb_mmio,	 1, 0x07000500);
 
 	val = nlm_read_reg(gpio_mmio, 21);
 	if (((val >> 22) & 0x01) == 0) {
 		pr_info("Detected USB Device mode - Not supported!\n");
-		nlm_write_reg(usb_mmio,  0, 0x01000000);
+		nlm_write_reg(usb_mmio,	 0, 0x01000000);
 		return 0;
 	}
 
 	pr_info("Detected USB Host mode - Adding XLS USB devices.\n");
 	/* Clear reset, host mode */
-	nlm_write_reg(usb_mmio,  0, 0x02000000);
+	nlm_write_reg(usb_mmio,	 0, 0x02000000);
 
 	/* Memory resource for various XLS usb ports */
 	usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_0_OFFSET);
@@ -221,8 +221,8 @@
 };
 
 static struct platform_device nlm_xlr_i2c_1 = {
-	.name           = "xlr-i2cbus",
-	.id             = 1,
+	.name		= "xlr-i2cbus",
+	.id		= 1,
 	.num_resources	= 1,
 	.resource	= i2c_resources,
 };
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index c5ce699..e3e0941 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -70,7 +70,7 @@
 	s.iotype	= UPIO_MEM32;
 	s.regshift	= 2;
 	s.irq		= PIC_UART_0_IRQ;
-	s.uartclk	= PIC_CLKS_PER_SEC;
+	s.uartclk	= PIC_CLK_HZ;
 	s.serial_in	= nlm_xlr_uart_in;
 	s.serial_out	= nlm_xlr_uart_out;
 	s.mapbase	= uart_base;
@@ -163,7 +163,7 @@
 {
 	struct nlm_boot_mem_map *bootm;
 	u64 start, size;
-	u64 pref_backup = 512;  /* avoid pref walking beyond end */
+	u64 pref_backup = 512;	/* avoid pref walking beyond end */
 	int i;
 
 	bootm = (void *)(long)nlm_prom_info.psb_mem_map;
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index e32db1f..af763e8 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -27,10 +27,10 @@
 	/* Pre-compute the values to stuff in the hardware registers.  */
 	model->reg_setup(ctr);
 
-	/* Configure the registers on all cpus.  */
+	/* Configure the registers on all cpus.	 */
 	on_each_cpu(model->cpu_setup, NULL, 1);
 
-        return 0;
+	return 0;
 }
 
 static int op_mips_create_files(struct super_block *sb, struct dentry *root)
@@ -78,6 +78,7 @@
 	switch (current_cpu_type()) {
 	case CPU_5KC:
 	case CPU_M14KC:
+	case CPU_M14KEC:
 	case CPU_20KC:
 	case CPU_24K:
 	case CPU_25KF:
@@ -110,7 +111,7 @@
 
 	ops->create_files	= op_mips_create_files;
 	ops->setup		= op_mips_setup;
-	//ops->shutdown         = op_mips_shutdown;
+	//ops->shutdown		= op_mips_shutdown;
 	ops->start		= op_mips_start;
 	ops->stop		= op_mips_stop;
 	ops->cpu_type		= lmodel->cpu_type;
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
index 60d3ea6..b249ec0 100644
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -18,13 +18,13 @@
 
 #define LOONGSON2_CPU_TYPE	"mips/loongson2"
 
-#define LOONGSON2_PERFCNT_OVERFLOW		(1ULL   << 31)
+#define LOONGSON2_PERFCNT_OVERFLOW		(1ULL	<< 31)
 
 #define LOONGSON2_PERFCTRL_EXL			(1UL	<<  0)
-#define LOONGSON2_PERFCTRL_KERNEL		(1UL    <<  1)
-#define LOONGSON2_PERFCTRL_SUPERVISOR		(1UL    <<  2)
-#define LOONGSON2_PERFCTRL_USER			(1UL    <<  3)
-#define LOONGSON2_PERFCTRL_ENABLE		(1UL    <<  4)
+#define LOONGSON2_PERFCTRL_KERNEL		(1UL	<<  1)
+#define LOONGSON2_PERFCTRL_SUPERVISOR		(1UL	<<  2)
+#define LOONGSON2_PERFCTRL_USER			(1UL	<<  3)
+#define LOONGSON2_PERFCTRL_ENABLE		(1UL	<<  4)
 #define LOONGSON2_PERFCTRL_EVENT(idx, event) \
 	(((event) & 0x0f) << ((idx) ? 9 : 5))
 
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 7862546..1fd3614 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -14,25 +14,25 @@
 
 #include "op_impl.h"
 
-#define M_PERFCTL_EXL			(1UL      <<  0)
-#define M_PERFCTL_KERNEL		(1UL      <<  1)
-#define M_PERFCTL_SUPERVISOR		(1UL      <<  2)
-#define M_PERFCTL_USER			(1UL      <<  3)
-#define M_PERFCTL_INTERRUPT_ENABLE	(1UL      <<  4)
+#define M_PERFCTL_EXL			(1UL	  <<  0)
+#define M_PERFCTL_KERNEL		(1UL	  <<  1)
+#define M_PERFCTL_SUPERVISOR		(1UL	  <<  2)
+#define M_PERFCTL_USER			(1UL	  <<  3)
+#define M_PERFCTL_INTERRUPT_ENABLE	(1UL	  <<  4)
 #define M_PERFCTL_EVENT(event)		(((event) & 0x3ff)  << 5)
-#define M_PERFCTL_VPEID(vpe)		((vpe)    << 16)
+#define M_PERFCTL_VPEID(vpe)		((vpe)	  << 16)
 #define M_PERFCTL_MT_EN(filter)		((filter) << 20)
-#define    M_TC_EN_ALL			M_PERFCTL_MT_EN(0)
-#define    M_TC_EN_VPE			M_PERFCTL_MT_EN(1)
-#define    M_TC_EN_TC			M_PERFCTL_MT_EN(2)
-#define M_PERFCTL_TCID(tcid)		((tcid)   << 22)
-#define M_PERFCTL_WIDE			(1UL      << 30)
-#define M_PERFCTL_MORE			(1UL      << 31)
+#define	   M_TC_EN_ALL			M_PERFCTL_MT_EN(0)
+#define	   M_TC_EN_VPE			M_PERFCTL_MT_EN(1)
+#define	   M_TC_EN_TC			M_PERFCTL_MT_EN(2)
+#define M_PERFCTL_TCID(tcid)		((tcid)	  << 22)
+#define M_PERFCTL_WIDE			(1UL	  << 30)
+#define M_PERFCTL_MORE			(1UL	  << 31)
 
-#define M_COUNTER_OVERFLOW		(1UL      << 31)
+#define M_COUNTER_OVERFLOW		(1UL	  << 31)
 
 /* Netlogic XLR specific, count events in all threads in a core */
-#define M_PERFCTL_COUNT_ALL_THREADS	(1UL      << 13)
+#define M_PERFCTL_COUNT_ALL_THREADS	(1UL	  << 13)
 
 static int (*save_perf_irq)(void);
 
@@ -143,7 +143,7 @@
 	unsigned int counter[4];
 } reg;
 
-/* Compute all of the registers in preparation for enabling profiling.  */
+/* Compute all of the registers in preparation for enabling profiling.	*/
 
 static void mipsxx_reg_setup(struct op_counter_config *ctr)
 {
@@ -159,7 +159,7 @@
 			continue;
 
 		reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) |
-		                 M_PERFCTL_INTERRUPT_ENABLE;
+				 M_PERFCTL_INTERRUPT_ENABLE;
 		if (ctr[i].kernel)
 			reg.control[i] |= M_PERFCTL_KERNEL;
 		if (ctr[i].user)
@@ -172,7 +172,7 @@
 	}
 }
 
-/* Program all of the registers in preparation for enabling profiling.  */
+/* Program all of the registers in preparation for enabling profiling.	*/
 
 static void mipsxx_cpu_setup(void *args)
 {
@@ -351,6 +351,10 @@
 		op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
 		break;
 
+	case CPU_M14KEC:
+		op_model_mipsxx_ops.cpu_type = "mips/M14KEc";
+		break;
+
 	case CPU_20KC:
 		op_model_mipsxx_ops.cpu_type = "mips/20K";
 		break;
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index ce995d3..2cb1d31 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -27,7 +27,6 @@
 #
 obj-$(CONFIG_LASAT)		+= pci-lasat.o
 obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
-obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
 obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fixup-fuloong2e.o ops-loongson2.o
 obj-$(CONFIG_LEMOTE_MACH2F)	+= fixup-lemote2f.o ops-loongson2.o
 obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o
@@ -55,10 +54,10 @@
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
 obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
-obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= pci-octeon.o pcie-octeon.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
 obj-$(CONFIG_CPU_XLR)		+= pci-xlr.o
 obj-$(CONFIG_CPU_XLP)		+= pci-xlp.o
 
 ifdef CONFIG_PCI_MSI
-obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
 endif
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 9553b14..a138e8e 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -94,14 +94,14 @@
 	 * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--
 	 *
 	 * On all machines prior to Q2, we had the STOP line disconnected
-	 * from Galileo to VIA on PCI.  The new Galileo does not function
+	 * from Galileo to VIA on PCI.	The new Galileo does not function
 	 * correctly unless we have it connected.
 	 *
 	 * Therefore we must set the disconnect/retry cycle values to
 	 * something sensible when using the new Galileo.
 	 */
 
- 	printk(KERN_INFO "Galileo: revision %u\n", dev->revision);
+	printk(KERN_INFO "Galileo: revision %u\n", dev->revision);
 
 #if 0
 	if (dev->revision >= 0x10) {
@@ -149,30 +149,30 @@
 	 qube_raq_via_board_id_fixup);
 
 static char irq_tab_qube1[] __initdata = {
-  [COBALT_PCICONF_CPU]     = 0,
-  [COBALT_PCICONF_ETH0]    = QUBE1_ETH0_IRQ,
+  [COBALT_PCICONF_CPU]	   = 0,
+  [COBALT_PCICONF_ETH0]	   = QUBE1_ETH0_IRQ,
   [COBALT_PCICONF_RAQSCSI] = SCSI_IRQ,
-  [COBALT_PCICONF_VIA]     = 0,
+  [COBALT_PCICONF_VIA]	   = 0,
   [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ,
-  [COBALT_PCICONF_ETH1]    = 0
+  [COBALT_PCICONF_ETH1]	   = 0
 };
 
 static char irq_tab_cobalt[] __initdata = {
-  [COBALT_PCICONF_CPU]     = 0,
-  [COBALT_PCICONF_ETH0]    = ETH0_IRQ,
+  [COBALT_PCICONF_CPU]	   = 0,
+  [COBALT_PCICONF_ETH0]	   = ETH0_IRQ,
   [COBALT_PCICONF_RAQSCSI] = SCSI_IRQ,
-  [COBALT_PCICONF_VIA]     = 0,
+  [COBALT_PCICONF_VIA]	   = 0,
   [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ,
-  [COBALT_PCICONF_ETH1]    = ETH1_IRQ
+  [COBALT_PCICONF_ETH1]	   = ETH1_IRQ
 };
 
 static char irq_tab_raq2[] __initdata = {
-  [COBALT_PCICONF_CPU]     = 0,
-  [COBALT_PCICONF_ETH0]    = ETH0_IRQ,
+  [COBALT_PCICONF_CPU]	   = 0,
+  [COBALT_PCICONF_ETH0]	   = ETH0_IRQ,
   [COBALT_PCICONF_RAQSCSI] = RAQ2_SCSI_IRQ,
-  [COBALT_PCICONF_VIA]     = 0,
+  [COBALT_PCICONF_VIA]	   = 0,
   [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ,
-  [COBALT_PCICONF_ETH1]    = ETH1_IRQ
+  [COBALT_PCICONF_ETH1]	   = ETH1_IRQ
 };
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c
index beaec32..19caf77 100644
--- a/arch/mips/pci/fixup-emma2rh.c
+++ b/arch/mips/pci/fixup-emma2rh.c
@@ -42,7 +42,7 @@
  *
  */
 
-#define	MAX_SLOT_NUM 10
+#define MAX_SLOT_NUM 10
 static unsigned char irq_map[][5] __initdata = {
 	[3] = {0, MARKEINS_PCI_IRQ_INTB, MARKEINS_PCI_IRQ_INTC,
 	       MARKEINS_PCI_IRQ_INTD, 0,},
diff --git a/arch/mips/pci/fixup-fuloong2e.c b/arch/mips/pci/fixup-fuloong2e.c
index 63ab4a0..50da773 100644
--- a/arch/mips/pci/fixup-fuloong2e.c
+++ b/arch/mips/pci/fixup-fuloong2e.c
@@ -6,9 +6,9 @@
  * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
  *  option) any later version.
  */
 #include <linux/init.h>
@@ -152,7 +152,7 @@
 	/* disable read prefetch/write post buffers */
 	pci_write_config_byte(pdev, 0x41, 0x02);
 
-	/* use 3/4 as fifo thresh hold  */
+	/* use 3/4 as fifo thresh hold	*/
 	pci_write_config_byte(pdev, 0x43, 0x0a);
 	pci_write_config_byte(pdev, 0x44, 0x00);
 
diff --git a/arch/mips/pci/fixup-ip32.c b/arch/mips/pci/fixup-ip32.c
index 190fffd..133685e 100644
--- a/arch/mips/pci/fixup-ip32.c
+++ b/arch/mips/pci/fixup-ip32.c
@@ -22,13 +22,13 @@
 #define INTC   MACEPCI_SHARED1_IRQ
 #define INTD   MACEPCI_SHARED2_IRQ
 static char irq_tab_mace[][5] __initdata = {
-      /* Dummy  INT#A  INT#B  INT#C  INT#D */
-	{0,         0,     0,     0,     0}, /* This is placeholder row - never used */
-	{0,     SCSI0, SCSI0, SCSI0, SCSI0},
-	{0,     SCSI1, SCSI1, SCSI1, SCSI1},
-	{0,     INTA0,  INTB,  INTC,  INTD},
-	{0,     INTA1,  INTC,  INTD,  INTB},
-	{0,     INTA2,  INTD,  INTB,  INTC},
+      /* Dummy	INT#A  INT#B  INT#C  INT#D */
+	{0,	    0,	   0,	  0,	 0}, /* This is placeholder row - never used */
+	{0,	SCSI0, SCSI0, SCSI0, SCSI0},
+	{0,	SCSI1, SCSI1, SCSI1, SCSI1},
+	{0,	INTA0,	INTB,  INTC,  INTD},
+	{0,	INTA1,	INTC,  INTD,  INTB},
+	{0,	INTA2,	INTD,  INTB,  INTC},
 };
 
 
diff --git a/arch/mips/pci/fixup-lemote2f.c b/arch/mips/pci/fixup-lemote2f.c
index 519daaebb..95ab9a1 100644
--- a/arch/mips/pci/fixup-lemote2f.c
+++ b/arch/mips/pci/fixup-lemote2f.c
@@ -31,7 +31,7 @@
 
 /* all the pci device has the PCIA pin, check the datasheet. */
 static char irq_tab[][5] __initdata = {
-	/*      INTA    INTB    INTC    INTD */
+	/*	INTA	INTB	INTC	INTD */
 	{0, 0, 0, 0, 0},	/*  11: Unused */
 	{0, 0, 0, 0, 0},	/*  12: Unused */
 	{0, 0, 0, 0, 0},	/*  13: Unused */
@@ -69,15 +69,15 @@
 		case 2:
 			pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
 					      CS5536_IDE_INTR);
-			return CS5536_IDE_INTR;	/*  for IDE */
+			return CS5536_IDE_INTR; /*  for IDE */
 		case 3:
 			pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
 					      CS5536_ACC_INTR);
-			return CS5536_ACC_INTR;	/*  for AUDIO */
-		case 4:	/*  for OHCI */
-		case 5:	/*  for EHCI */
-		case 6:	/*  for UDC */
-		case 7:	/*  for OTG */
+			return CS5536_ACC_INTR; /*  for AUDIO */
+		case 4: /*  for OHCI */
+		case 5: /*  for EHCI */
+		case 6: /*  for UDC */
+		case 7: /*  for OTG */
 			pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
 					      CS5536_USB_INTR);
 			return CS5536_USB_INTR;
diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c
index 75d03f6..07ada7f 100644
--- a/arch/mips/pci/fixup-malta.c
+++ b/arch/mips/pci/fixup-malta.c
@@ -12,7 +12,7 @@
 };
 
 static char irq_tab[][5] __initdata = {
-	/*      INTA    INTB    INTC    INTD */
+	/*	INTA	INTB	INTC	INTD */
 	{0,	0,	0,	0,	0 },	/*  0: GT64120 PCI bridge */
 	{0,	0,	0,	0,	0 },	/*  1: Unused */
 	{0,	0,	0,	0,	0 },	/*  2: Unused */
@@ -23,7 +23,7 @@
 	{0,	0,	0,	0,	0 },	/*  7: Unused */
 	{0,	0,	0,	0,	0 },	/*  8: Unused */
 	{0,	0,	0,	0,	0 },	/*  9: Unused */
-	{0,	0,	0,	0,	PCID },	/* 10: PIIX4 USB */
+	{0,	0,	0,	0,	PCID }, /* 10: PIIX4 USB */
 	{0,	PCIB,	0,	0,	0 },	/* 11: AMD 79C973 Ethernet */
 	{0,	PCIC,	0,	0,	0 },	/* 12: Crystal 4281 Sound */
 	{0,	0,	0,	0,	0 },	/* 13: Unused */
@@ -31,9 +31,9 @@
 	{0,	0,	0,	0,	0 },	/* 15: Unused */
 	{0,	0,	0,	0,	0 },	/* 16: Unused */
 	{0,	0,	0,	0,	0 },	/* 17: Bonito/SOC-it PCI Bridge*/
-	{0,	PCIA,	PCIB,	PCIC,	PCID },	/* 18: PCI Slot 1 */
-	{0,	PCIB,	PCIC,	PCID,	PCIA },	/* 19: PCI Slot 2 */
-	{0,	PCIC,	PCID,	PCIA,	PCIB },	/* 20: PCI Slot 3 */
+	{0,	PCIA,	PCIB,	PCIC,	PCID }, /* 18: PCI Slot 1 */
+	{0,	PCIB,	PCIC,	PCID,	PCIA }, /* 19: PCI Slot 2 */
+	{0,	PCIC,	PCID,	PCIA,	PCIB }, /* 20: PCI Slot 3 */
 	{0,	PCID,	PCIA,	PCIB,	PCIC }	/* 21: PCI Slot 4 */
 };
 
@@ -54,8 +54,8 @@
 {
 	unsigned char reg_val;
 	static int piixirqmap[16] = {  /* PIIX PIRQC[A:D] irq mappings */
-		0,  0, 	0,  3,
-		4,  5,  6,  7,
+		0,  0,	0,  3,
+		4,  5,	6,  7,
 		0,  9, 10, 11,
 		12, 0, 14, 15
 	};
diff --git a/arch/mips/pci/fixup-pmcmsp.c b/arch/mips/pci/fixup-pmcmsp.c
index 65735b1..fab405c 100644
--- a/arch/mips/pci/fixup-pmcmsp.c
+++ b/arch/mips/pci/fixup-pmcmsp.c
@@ -48,117 +48,117 @@
 #if defined(CONFIG_PMC_MSP7120_GW)
 /* Garibaldi Board IRQ wiring to PCI slots */
 static char irq_tab[][5] __initdata = {
-	/* INTA    INTB    INTC    INTD */
-	{0,     0,      0,      0,      0 },    /*    (AD[0]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[1]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[2]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[3]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[4]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[5]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[6]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[7]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[8]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[9]): Unused */
-	{0,     0,      0,      0,      0 },    /*  0 (AD[10]): Unused */
-	{0,     0,      0,      0,      0 },    /*  1 (AD[11]): Unused */
-	{0,     0,      0,      0,      0 },    /*  2 (AD[12]): Unused */
-	{0,     0,      0,      0,      0 },    /*  3 (AD[13]): Unused */
-	{0,     0,      0,      0,      0 },    /*  4 (AD[14]): Unused */
-	{0,     0,      0,      0,      0 },    /*  5 (AD[15]): Unused */
-	{0,     0,      0,      0,      0 },    /*  6 (AD[16]): Unused */
-	{0,     0,      0,      0,      0 },    /*  7 (AD[17]): Unused */
-	{0,     0,      0,      0,      0 },    /*  8 (AD[18]): Unused */
-	{0,     0,      0,      0,      0 },    /*  9 (AD[19]): Unused */
-	{0,     0,      0,      0,      0 },    /* 10 (AD[20]): Unused */
-	{0,     0,      0,      0,      0 },    /* 11 (AD[21]): Unused */
-	{0,     0,      0,      0,      0 },    /* 12 (AD[22]): Unused */
-	{0,     0,      0,      0,      0 },    /* 13 (AD[23]): Unused */
-	{0,     0,      0,      0,      0 },    /* 14 (AD[24]): Unused */
-	{0,     0,      0,      0,      0 },    /* 15 (AD[25]): Unused */
-	{0,     0,      0,      0,      0 },    /* 16 (AD[26]): Unused */
-	{0,     0,      0,      0,      0 },    /* 17 (AD[27]): Unused */
-	{0,     IRQ4,   IRQ4,   0,      0 },    /* 18 (AD[28]): slot 0 */
-	{0,     0,      0,      0,      0 },    /* 19 (AD[29]): Unused */
-	{0,     IRQ5,   IRQ5,   0,      0 },    /* 20 (AD[30]): slot 1 */
-	{0,     IRQ6,   IRQ6,   0,      0 }     /* 21 (AD[31]): slot 2 */
+	/* INTA	   INTB	   INTC	   INTD */
+	{0,	0,	0,	0,	0 },	/*    (AD[0]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[1]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[2]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[3]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[4]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[5]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[6]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[7]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[8]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[9]): Unused */
+	{0,	0,	0,	0,	0 },	/*  0 (AD[10]): Unused */
+	{0,	0,	0,	0,	0 },	/*  1 (AD[11]): Unused */
+	{0,	0,	0,	0,	0 },	/*  2 (AD[12]): Unused */
+	{0,	0,	0,	0,	0 },	/*  3 (AD[13]): Unused */
+	{0,	0,	0,	0,	0 },	/*  4 (AD[14]): Unused */
+	{0,	0,	0,	0,	0 },	/*  5 (AD[15]): Unused */
+	{0,	0,	0,	0,	0 },	/*  6 (AD[16]): Unused */
+	{0,	0,	0,	0,	0 },	/*  7 (AD[17]): Unused */
+	{0,	0,	0,	0,	0 },	/*  8 (AD[18]): Unused */
+	{0,	0,	0,	0,	0 },	/*  9 (AD[19]): Unused */
+	{0,	0,	0,	0,	0 },	/* 10 (AD[20]): Unused */
+	{0,	0,	0,	0,	0 },	/* 11 (AD[21]): Unused */
+	{0,	0,	0,	0,	0 },	/* 12 (AD[22]): Unused */
+	{0,	0,	0,	0,	0 },	/* 13 (AD[23]): Unused */
+	{0,	0,	0,	0,	0 },	/* 14 (AD[24]): Unused */
+	{0,	0,	0,	0,	0 },	/* 15 (AD[25]): Unused */
+	{0,	0,	0,	0,	0 },	/* 16 (AD[26]): Unused */
+	{0,	0,	0,	0,	0 },	/* 17 (AD[27]): Unused */
+	{0,	IRQ4,	IRQ4,	0,	0 },	/* 18 (AD[28]): slot 0 */
+	{0,	0,	0,	0,	0 },	/* 19 (AD[29]): Unused */
+	{0,	IRQ5,	IRQ5,	0,	0 },	/* 20 (AD[30]): slot 1 */
+	{0,	IRQ6,	IRQ6,	0,	0 }	/* 21 (AD[31]): slot 2 */
 };
 
 #elif defined(CONFIG_PMC_MSP7120_EVAL)
 
 /* MSP7120 Eval Board IRQ wiring to PCI slots */
 static char irq_tab[][5] __initdata = {
-	/* INTA    INTB    INTC    INTD */
-	{0,     0,      0,      0,      0 },    /*    (AD[0]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[1]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[2]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[3]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[4]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[5]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[6]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[7]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[8]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[9]): Unused */
-	{0,     0,      0,      0,      0 },    /*  0 (AD[10]): Unused */
-	{0,     0,      0,      0,      0 },    /*  1 (AD[11]): Unused */
-	{0,     0,      0,      0,      0 },    /*  2 (AD[12]): Unused */
-	{0,     0,      0,      0,      0 },    /*  3 (AD[13]): Unused */
-	{0,     0,      0,      0,      0 },    /*  4 (AD[14]): Unused */
-	{0,     0,      0,      0,      0 },    /*  5 (AD[15]): Unused */
-	{0,     IRQ6,   IRQ6,   0,      0 },    /*  6 (AD[16]): slot 3 (mini) */
-	{0,     IRQ5,   IRQ5,   0,      0 },    /*  7 (AD[17]): slot 2 (mini) */
-	{0,     IRQ4,   IRQ4,   IRQ4,   IRQ4},  /*  8 (AD[18]): slot 0 (PCI) */
-	{0,     IRQ5,   IRQ5,   IRQ5,   IRQ5},  /*  9 (AD[19]): slot 1 (PCI) */
-	{0,     0,      0,      0,      0 },    /* 10 (AD[20]): Unused */
-	{0,     0,      0,      0,      0 },    /* 11 (AD[21]): Unused */
-	{0,     0,      0,      0,      0 },    /* 12 (AD[22]): Unused */
-	{0,     0,      0,      0,      0 },    /* 13 (AD[23]): Unused */
-	{0,     0,      0,      0,      0 },    /* 14 (AD[24]): Unused */
-	{0,     0,      0,      0,      0 },    /* 15 (AD[25]): Unused */
-	{0,     0,      0,      0,      0 },    /* 16 (AD[26]): Unused */
-	{0,     0,      0,      0,      0 },    /* 17 (AD[27]): Unused */
-	{0,     0,      0,      0,      0 },    /* 18 (AD[28]): Unused */
-	{0,     0,      0,      0,      0 },    /* 19 (AD[29]): Unused */
-	{0,     0,      0,      0,      0 },    /* 20 (AD[30]): Unused */
-	{0,     0,      0,      0,      0 }     /* 21 (AD[31]): Unused */
+	/* INTA	   INTB	   INTC	   INTD */
+	{0,	0,	0,	0,	0 },	/*    (AD[0]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[1]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[2]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[3]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[4]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[5]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[6]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[7]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[8]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[9]): Unused */
+	{0,	0,	0,	0,	0 },	/*  0 (AD[10]): Unused */
+	{0,	0,	0,	0,	0 },	/*  1 (AD[11]): Unused */
+	{0,	0,	0,	0,	0 },	/*  2 (AD[12]): Unused */
+	{0,	0,	0,	0,	0 },	/*  3 (AD[13]): Unused */
+	{0,	0,	0,	0,	0 },	/*  4 (AD[14]): Unused */
+	{0,	0,	0,	0,	0 },	/*  5 (AD[15]): Unused */
+	{0,	IRQ6,	IRQ6,	0,	0 },	/*  6 (AD[16]): slot 3 (mini) */
+	{0,	IRQ5,	IRQ5,	0,	0 },	/*  7 (AD[17]): slot 2 (mini) */
+	{0,	IRQ4,	IRQ4,	IRQ4,	IRQ4},	/*  8 (AD[18]): slot 0 (PCI) */
+	{0,	IRQ5,	IRQ5,	IRQ5,	IRQ5},	/*  9 (AD[19]): slot 1 (PCI) */
+	{0,	0,	0,	0,	0 },	/* 10 (AD[20]): Unused */
+	{0,	0,	0,	0,	0 },	/* 11 (AD[21]): Unused */
+	{0,	0,	0,	0,	0 },	/* 12 (AD[22]): Unused */
+	{0,	0,	0,	0,	0 },	/* 13 (AD[23]): Unused */
+	{0,	0,	0,	0,	0 },	/* 14 (AD[24]): Unused */
+	{0,	0,	0,	0,	0 },	/* 15 (AD[25]): Unused */
+	{0,	0,	0,	0,	0 },	/* 16 (AD[26]): Unused */
+	{0,	0,	0,	0,	0 },	/* 17 (AD[27]): Unused */
+	{0,	0,	0,	0,	0 },	/* 18 (AD[28]): Unused */
+	{0,	0,	0,	0,	0 },	/* 19 (AD[29]): Unused */
+	{0,	0,	0,	0,	0 },	/* 20 (AD[30]): Unused */
+	{0,	0,	0,	0,	0 }	/* 21 (AD[31]): Unused */
 };
 
 #else
 
 /* Unknown board -- don't assign any IRQs */
 static char irq_tab[][5] __initdata = {
-	/* INTA    INTB    INTC    INTD */
-	{0,     0,      0,      0,      0 },    /*    (AD[0]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[1]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[2]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[3]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[4]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[5]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[6]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[7]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[8]): Unused */
-	{0,     0,      0,      0,      0 },    /*    (AD[9]): Unused */
-	{0,     0,      0,      0,      0 },    /*  0 (AD[10]): Unused */
-	{0,     0,      0,      0,      0 },    /*  1 (AD[11]): Unused */
-	{0,     0,      0,      0,      0 },    /*  2 (AD[12]): Unused */
-	{0,     0,      0,      0,      0 },    /*  3 (AD[13]): Unused */
-	{0,     0,      0,      0,      0 },    /*  4 (AD[14]): Unused */
-	{0,     0,      0,      0,      0 },    /*  5 (AD[15]): Unused */
-	{0,     0,      0,      0,      0 },    /*  6 (AD[16]): Unused */
-	{0,     0,      0,      0,      0 },    /*  7 (AD[17]): Unused */
-	{0,     0,      0,      0,      0 },    /*  8 (AD[18]): Unused */
-	{0,     0,      0,      0,      0 },    /*  9 (AD[19]): Unused */
-	{0,     0,      0,      0,      0 },    /* 10 (AD[20]): Unused */
-	{0,     0,      0,      0,      0 },    /* 11 (AD[21]): Unused */
-	{0,     0,      0,      0,      0 },    /* 12 (AD[22]): Unused */
-	{0,     0,      0,      0,      0 },    /* 13 (AD[23]): Unused */
-	{0,     0,      0,      0,      0 },    /* 14 (AD[24]): Unused */
-	{0,     0,      0,      0,      0 },    /* 15 (AD[25]): Unused */
-	{0,     0,      0,      0,      0 },    /* 16 (AD[26]): Unused */
-	{0,     0,      0,      0,      0 },    /* 17 (AD[27]): Unused */
-	{0,     0,      0,      0,      0 },    /* 18 (AD[28]): Unused */
-	{0,     0,      0,      0,      0 },    /* 19 (AD[29]): Unused */
-	{0,     0,      0,      0,      0 },    /* 20 (AD[30]): Unused */
-	{0,     0,      0,      0,      0 }     /* 21 (AD[31]): Unused */
+	/* INTA	   INTB	   INTC	   INTD */
+	{0,	0,	0,	0,	0 },	/*    (AD[0]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[1]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[2]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[3]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[4]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[5]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[6]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[7]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[8]): Unused */
+	{0,	0,	0,	0,	0 },	/*    (AD[9]): Unused */
+	{0,	0,	0,	0,	0 },	/*  0 (AD[10]): Unused */
+	{0,	0,	0,	0,	0 },	/*  1 (AD[11]): Unused */
+	{0,	0,	0,	0,	0 },	/*  2 (AD[12]): Unused */
+	{0,	0,	0,	0,	0 },	/*  3 (AD[13]): Unused */
+	{0,	0,	0,	0,	0 },	/*  4 (AD[14]): Unused */
+	{0,	0,	0,	0,	0 },	/*  5 (AD[15]): Unused */
+	{0,	0,	0,	0,	0 },	/*  6 (AD[16]): Unused */
+	{0,	0,	0,	0,	0 },	/*  7 (AD[17]): Unused */
+	{0,	0,	0,	0,	0 },	/*  8 (AD[18]): Unused */
+	{0,	0,	0,	0,	0 },	/*  9 (AD[19]): Unused */
+	{0,	0,	0,	0,	0 },	/* 10 (AD[20]): Unused */
+	{0,	0,	0,	0,	0 },	/* 11 (AD[21]): Unused */
+	{0,	0,	0,	0,	0 },	/* 12 (AD[22]): Unused */
+	{0,	0,	0,	0,	0 },	/* 13 (AD[23]): Unused */
+	{0,	0,	0,	0,	0 },	/* 14 (AD[24]): Unused */
+	{0,	0,	0,	0,	0 },	/* 15 (AD[25]): Unused */
+	{0,	0,	0,	0,	0 },	/* 16 (AD[26]): Unused */
+	{0,	0,	0,	0,	0 },	/* 17 (AD[27]): Unused */
+	{0,	0,	0,	0,	0 },	/* 18 (AD[28]): Unused */
+	{0,	0,	0,	0,	0 },	/* 19 (AD[29]): Unused */
+	{0,	0,	0,	0,	0 },	/* 20 (AD[30]): Unused */
+	{0,	0,	0,	0,	0 }	/* 21 (AD[31]): Unused */
 };
 #endif
 
@@ -168,14 +168,14 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Perform platform specific device initialization at
- *               pci_enable_device() time.
- *               None are needed for the MSP7120 PCI Controller.
+ *		 pci_enable_device() time.
+ *		 None are needed for the MSP7120 PCI Controller.
  *
- *  INPUTS:      dev     - structure describing the PCI device
+ *  INPUTS:	 dev	 - structure describing the PCI device
  *
- *  OUTPUTS:     none
+ *  OUTPUTS:	 none
  *
- *  RETURNS:     PCIBIOS_SUCCESSFUL
+ *  RETURNS:	 PCIBIOS_SUCCESSFUL
  *
  ****************************************************************************/
 int pcibios_plat_dev_init(struct pci_dev *dev)
@@ -190,16 +190,16 @@
  *
  *  DESCRIPTION: Perform board supplied PCI IRQ mapping routine.
  *
- *  INPUTS:      dev     - unused
- *               slot    - PCI slot. Identified by which bit of the AD[] bus
- *                         drives the IDSEL line. AD[10] is 0, AD[31] is
- *                         slot 21.
- *               pin     - numbered using the scheme of the PCI_INTERRUPT_PIN
- *                         field of the config header.
+ *  INPUTS:	 dev	 - unused
+ *		 slot	 - PCI slot. Identified by which bit of the AD[] bus
+ *			   drives the IDSEL line. AD[10] is 0, AD[31] is
+ *			   slot 21.
+ *		 pin	 - numbered using the scheme of the PCI_INTERRUPT_PIN
+ *			   field of the config header.
  *
- *  OUTPUTS:     none
+ *  OUTPUTS:	 none
  *
- *  RETURNS:     IRQ number
+ *  RETURNS:	 IRQ number
  *
  ****************************************************************************/
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/arch/mips/pci/fixup-pnx8550.c b/arch/mips/pci/fixup-pnx8550.c
deleted file mode 100644
index 96857ac..0000000
--- a/arch/mips/pci/fixup-pnx8550.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  Philips PNX8550 pci fixups.
- *
- *  Copyright 2005 Embedded Alley Solutions, Inc
- *  source@embeddealley.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/mach-pnx8550/pci.h>
-#include <asm/mach-pnx8550/int.h>
-
-
-#undef	DEBUG
-#ifdef 	DEBUG
-#define	DBG(x...)	printk(x)
-#else
-#define	DBG(x...)
-#endif
-
-extern char pnx8550_irq_tab[][5];
-
-void __init pcibios_fixup_resources(struct pci_dev *dev)
-{
-	/* no need to fixup IO resources */
-}
-
-void __init pcibios_fixup(void)
-{
-	/* nothing to do here */
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return pnx8550_irq_tab[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c
index 5c8a79b..f67ebee 100644
--- a/arch/mips/pci/fixup-sni.c
+++ b/arch/mips/pci/fixup-sni.c
@@ -41,12 +41,12 @@
  * Logic CL-GD5434 VGA is device 3.
  */
 static char irq_tab_rm200[8][5] __initdata = {
-	/*       INTA  INTB  INTC  INTD */
-	{     0,    0,    0,    0,    0 },	/* EISA bridge */
+	/*	 INTA  INTB  INTC  INTD */
+	{     0,    0,	  0,	0,    0 },	/* EISA bridge */
 	{  SCSI, SCSI, SCSI, SCSI, SCSI },	/* SCSI */
-	{   ETH,  ETH,  ETH,  ETH,  ETH },	/* Ethernet */
+	{   ETH,  ETH,	ETH,  ETH,  ETH },	/* Ethernet */
 	{  INTB, INTB, INTB, INTB, INTB },	/* VGA */
-	{     0,    0,    0,    0,    0 },	/* Unused */
+	{     0,    0,	  0,	0,    0 },	/* Unused */
 	{     0, INTB, INTC, INTD, INTA },	/* Slot 2 */
 	{     0, INTC, INTD, INTA, INTB },	/* Slot 3 */
 	{     0, INTD, INTA, INTB, INTC },	/* Slot 4 */
@@ -58,20 +58,20 @@
  * The VGA card is optional for RM300 systems.
  */
 static char irq_tab_rm300d[8][5] __initdata = {
-	/*       INTA  INTB  INTC  INTD */
-	{     0,    0,    0,    0,    0 },	/* EISA bridge */
+	/*	 INTA  INTB  INTC  INTD */
+	{     0,    0,	  0,	0,    0 },	/* EISA bridge */
 	{  SCSI, SCSI, SCSI, SCSI, SCSI },	/* SCSI */
 	{     0, INTC, INTD, INTA, INTB },	/* Slot 1 */
 	{  INTB, INTB, INTB, INTB, INTB },	/* VGA */
-	{     0,    0,    0,    0,    0 },	/* Unused */
+	{     0,    0,	  0,	0,    0 },	/* Unused */
 	{     0, INTB, INTC, INTD, INTA },	/* Slot 2 */
 	{     0, INTC, INTD, INTA, INTB },	/* Slot 3 */
 	{     0, INTD, INTA, INTB, INTC },	/* Slot 4 */
 };
 
 static char irq_tab_rm300e[5][5] __initdata = {
-	/*       INTA  INTB  INTC  INTD */
-	{     0,    0,    0,    0,    0 },	/* HOST bridge */
+	/*	 INTA  INTB  INTC  INTD */
+	{     0,    0,	  0,	0,    0 },	/* HOST bridge */
 	{  SCSI, SCSI, SCSI, SCSI, SCSI },	/* SCSI */
 	{     0, INTC, INTD, INTA, INTB },	/* Bridge/i960 */
 	{     0, INTD, INTA, INTB, INTC },	/* Slot 1 */
@@ -97,30 +97,30 @@
 #define INTD	PCIT_IRQ_INTD
 
 static char irq_tab_pcit[13][5] __initdata = {
-	/*       INTA  INTB  INTC  INTD */
-	{     0,     0,     0,     0,     0 },	/* HOST bridge */
+	/*	 INTA  INTB  INTC  INTD */
+	{     0,     0,	    0,	   0,	  0 },	/* HOST bridge */
 	{ SCSI0, SCSI0, SCSI0, SCSI0, SCSI0 },	/* SCSI */
 	{ SCSI1, SCSI1, SCSI1, SCSI1, SCSI1 },	/* SCSI */
-	{   ETH,   ETH,   ETH,   ETH,   ETH },	/* Ethernet */
-	{     0,  INTA,  INTB,  INTC,  INTD },	/* PCI-PCI bridge */
-	{     0,     0,     0,     0,     0 },	/* Unused */
-	{     0,     0,     0,     0,     0 },	/* Unused */
-	{     0,     0,     0,     0,     0 },	/* Unused */
-	{     0,  INTA,  INTB,  INTC,  INTD },	/* Slot 1 */
-	{     0,  INTB,  INTC,  INTD,  INTA },	/* Slot 2 */
-	{     0,  INTC,  INTD,  INTA,  INTB },	/* Slot 3 */
-	{     0,  INTD,  INTA,  INTB,  INTC },	/* Slot 4 */
-	{     0,  INTA,  INTB,  INTC,  INTD },	/* Slot 5 */
+	{   ETH,   ETH,	  ETH,	 ETH,	ETH },	/* Ethernet */
+	{     0,  INTA,	 INTB,	INTC,  INTD },	/* PCI-PCI bridge */
+	{     0,     0,	    0,	   0,	  0 },	/* Unused */
+	{     0,     0,	    0,	   0,	  0 },	/* Unused */
+	{     0,     0,	    0,	   0,	  0 },	/* Unused */
+	{     0,  INTA,	 INTB,	INTC,  INTD },	/* Slot 1 */
+	{     0,  INTB,	 INTC,	INTD,  INTA },	/* Slot 2 */
+	{     0,  INTC,	 INTD,	INTA,  INTB },	/* Slot 3 */
+	{     0,  INTD,	 INTA,	INTB,  INTC },	/* Slot 4 */
+	{     0,  INTA,	 INTB,	INTC,  INTD },	/* Slot 5 */
 };
 
 static char irq_tab_pcit_cplus[13][5] __initdata = {
-	/*       INTA  INTB  INTC  INTD */
-	{     0,     0,     0,     0,     0 },	/* HOST bridge */
-	{     0,  INTB,  INTC,  INTD,  INTA },	/* PCI Slot 9 */
-	{     0,     0,     0,     0,     0 },	/* PCI-EISA */
-	{     0,     0,     0,     0,     0 },	/* Unused */
-	{     0,  INTA,  INTB,  INTC,  INTD },	/* PCI-PCI bridge */
-	{     0,  INTB,  INTC,  INTD,  INTA },	/* fixup */
+	/*	 INTA  INTB  INTC  INTD */
+	{     0,     0,	    0,	   0,	  0 },	/* HOST bridge */
+	{     0,  INTB,	 INTC,	INTD,  INTA },	/* PCI Slot 9 */
+	{     0,     0,	    0,	   0,	  0 },	/* PCI-EISA */
+	{     0,     0,	    0,	   0,	  0 },	/* Unused */
+	{     0,  INTA,	 INTB,	INTC,  INTD },	/* PCI-PCI bridge */
+	{     0,  INTB,	 INTC,	INTD,  INTA },	/* fixup */
 };
 
 static inline int is_rm300_revd(void)
@@ -146,18 +146,18 @@
 		}
 		return irq_tab_pcit_cplus[slot][pin];
 	case SNI_BRD_PCI_TOWER:
-	        return irq_tab_pcit[slot][pin];
+		return irq_tab_pcit[slot][pin];
 
 	case SNI_BRD_PCI_MTOWER:
-	        if (is_rm300_revd())
-		        return irq_tab_rm300d[slot][pin];
-	        /* fall through */
+		if (is_rm300_revd())
+			return irq_tab_rm300d[slot][pin];
+		/* fall through */
 
 	case SNI_BRD_PCI_DESKTOP:
-	        return irq_tab_rm200[slot][pin];
+		return irq_tab_rm200[slot][pin];
 
 	case SNI_BRD_PCI_MTOWER_CPLUS:
-	        return irq_tab_rm300e[slot][pin];
+		return irq_tab_rm300e[slot][pin];
 	}
 
 	return 0;
diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c
index 8084b17..d0b0083 100644
--- a/arch/mips/pci/fixup-tb0219.c
+++ b/arch/mips/pci/fixup-tb0219.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-tb0219.c, The TANBAC TB0219 specific PCI fixups.
  *
- *  Copyright (C) 2003  Megasolution Inc. <matsu@megasolution.jp>
+ *  Copyright (C) 2003	Megasolution Inc. <matsu@megasolution.jp>
  *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c
index 2fe29db..8c5039e 100644
--- a/arch/mips/pci/fixup-tb0287.c
+++ b/arch/mips/pci/fixup-tb0287.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2005	Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-wrppmc.c b/arch/mips/pci/fixup-wrppmc.c
index 3d27754..29737ed 100644
--- a/arch/mips/pci/fixup-wrppmc.c
+++ b/arch/mips/pci/fixup-wrppmc.c
@@ -20,7 +20,7 @@
 #define PCI_SLOT_MAXNR	32 /* Each PCI bus has 32 physical slots */
 
 static char pci_irq_tab[PCI_SLOT_MAXNR][5] __initdata = {
-	/* 0    INTA   INTB   INTC   INTD */
+	/* 0	INTA   INTB   INTC   INTD */
 	[0] = {0, 0, 0, 0, 0},		/* Slot 0: GT64120 PCI bridge */
 	[6] = {0, WRPPMC_PCI_INTA_IRQ, 0, 0, 0},
 };
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
index 4a15662..6144bb3 100644
--- a/arch/mips/pci/ops-bcm63xx.c
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -174,8 +174,8 @@
 }
 
 struct pci_ops bcm63xx_pci_ops = {
-	.read   = bcm63xx_pci_read,
-	.write  = bcm63xx_pci_write
+	.read	= bcm63xx_pci_read,
+	.write	= bcm63xx_pci_write
 };
 
 #ifdef CONFIG_CARDBUS
@@ -370,8 +370,8 @@
 		return fake_cb_bridge_read(where, size, val);
 	}
 
-	/* a  configuration  cycle for  the  device  behind the  cardbus
-	 * bridge is  actually done as a  type 0 cycle  on the primary
+	/* a  configuration  cycle for	the  device  behind the	 cardbus
+	 * bridge is  actually done as a  type 0 cycle	on the primary
 	 * bus. This means that only  one device can be on the cardbus
 	 * bus */
 	if (fake_cb_bridge_regs.bus_assigned &&
@@ -403,8 +403,8 @@
 }
 
 struct pci_ops bcm63xx_cb_ops = {
-	.read   = bcm63xx_cb_read,
-	.write   = bcm63xx_cb_write,
+	.read	= bcm63xx_cb_read,
+	.write	 = bcm63xx_cb_write,
 };
 
 /*
@@ -523,6 +523,6 @@
 
 
 struct pci_ops bcm63xx_pcie_ops = {
-	.read   = bcm63xx_pcie_read,
-	.write  = bcm63xx_pcie_write
+	.read	= bcm63xx_pcie_read,
+	.write	= bcm63xx_pcie_write
 };
diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c
index 1b3e03f..830352e 100644
--- a/arch/mips/pci/ops-bonito64.c
+++ b/arch/mips/pci/ops-bonito64.c
@@ -26,7 +26,7 @@
 
 #include <asm/mips-boards/bonito64.h>
 
-#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_READ	 0
 #define PCI_ACCESS_WRITE 1
 
 #define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(_pcictrl_bonito_pcicfg + (offset))
@@ -137,7 +137,7 @@
 		data = val;
 	else {
 		if (bonito64_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
-		                               where, &data))
+					       where, &data))
 			return -1;
 
 		if (size == 1)
diff --git a/arch/mips/pci/ops-gt64xxx_pci0.c b/arch/mips/pci/ops-gt64xxx_pci0.c
index 3d896c5..effcbda 100644
--- a/arch/mips/pci/ops-gt64xxx_pci0.c
+++ b/arch/mips/pci/ops-gt64xxx_pci0.c
@@ -23,21 +23,21 @@
 
 #include <asm/gt64120.h>
 
-#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_READ	 0
 #define PCI_ACCESS_WRITE 1
 
 /*
  *  PCI configuration cycle AD bus definition
  */
 /* Type 0 */
-#define PCI_CFG_TYPE0_REG_SHF           0
-#define PCI_CFG_TYPE0_FUNC_SHF          8
+#define PCI_CFG_TYPE0_REG_SHF		0
+#define PCI_CFG_TYPE0_FUNC_SHF		8
 
 /* Type 1 */
-#define PCI_CFG_TYPE1_REG_SHF           0
-#define PCI_CFG_TYPE1_FUNC_SHF          8
-#define PCI_CFG_TYPE1_DEV_SHF           11
-#define PCI_CFG_TYPE1_BUS_SHF           16
+#define PCI_CFG_TYPE1_REG_SHF		0
+#define PCI_CFG_TYPE1_FUNC_SHF		8
+#define PCI_CFG_TYPE1_DEV_SHF		11
+#define PCI_CFG_TYPE1_BUS_SHF		16
 
 static int gt64xxx_pci0_pcibios_config_access(unsigned char access_type,
 		struct pci_bus *bus, unsigned int devfn, int where, u32 * data)
@@ -50,7 +50,7 @@
 
 	/* Clear cause register bits */
 	GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT |
-	                             GT_INTRCAUSE_TARABORT0_BIT));
+				     GT_INTRCAUSE_TARABORT0_BIT));
 
 	/* Setup address */
 	GT_WRITE(GT_PCI0_CFGADDR_OFS,
@@ -87,7 +87,7 @@
 
 		/* Clear bits */
 		GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT |
-		                             GT_INTRCAUSE_TARABORT0_BIT));
+					     GT_INTRCAUSE_TARABORT0_BIT));
 
 		return -1;
 	}
@@ -106,7 +106,7 @@
 	u32 data = 0;
 
 	if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
-	                                       where, &data))
+					       where, &data))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (size == 1)
@@ -128,7 +128,7 @@
 		data = val;
 	else {
 		if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_READ, bus,
-		                                       devfn, where, &data))
+						       devfn, where, &data))
 			return PCIBIOS_DEVICE_NOT_FOUND;
 
 		if (size == 1)
@@ -140,7 +140,7 @@
 	}
 
 	if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
-	                                       where, &data))
+					       where, &data))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	return PCIBIOS_SUCCESSFUL;
diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c
index 1f2afb5..16e7c25 100644
--- a/arch/mips/pci/ops-lantiq.c
+++ b/arch/mips/pci/ops-lantiq.c
@@ -23,7 +23,7 @@
 #define LTQ_PCI_CFG_DEVNUM_SHF 11
 #define LTQ_PCI_CFG_FUNNUM_SHF 8
 
-#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_READ	 0
 #define PCI_ACCESS_WRITE 1
 
 static int ltq_pci_config_access(unsigned char access_type, struct pci_bus *bus,
diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c
index afd2211..98254af 100644
--- a/arch/mips/pci/ops-loongson2.c
+++ b/arch/mips/pci/ops-loongson2.c
@@ -24,7 +24,7 @@
 #include <cs5536/cs5536.h>
 #endif
 
-#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_READ	 0
 #define PCI_ACCESS_WRITE 1
 
 #define CFG_SPACE_REG(offset) \
diff --git a/arch/mips/pci/ops-msc.c b/arch/mips/pci/ops-msc.c
index 5d9fbb0..92a8543 100644
--- a/arch/mips/pci/ops-msc.c
+++ b/arch/mips/pci/ops-msc.c
@@ -1,8 +1,8 @@
 /*
- * Copyright (C) 1999, 2000, 2004, 2005  MIPS Technologies, Inc.
+ * Copyright (C) 1999, 2000, 2004, 2005	 MIPS Technologies, Inc.
  *    All rights reserved.
  *    Authors: Carsten Langgaard <carstenl@mips.com>
- *             Maciej W. Rozycki <macro@mips.com>
+ *	       Maciej W. Rozycki <macro@mips.com>
  * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
  *
  *  This program is free software; you can distribute it and/or modify it
@@ -28,21 +28,21 @@
 
 #include <asm/mips-boards/msc01_pci.h>
 
-#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_READ	 0
 #define PCI_ACCESS_WRITE 1
 
 /*
  *  PCI configuration cycle AD bus definition
  */
 /* Type 0 */
-#define PCI_CFG_TYPE0_REG_SHF           0
-#define PCI_CFG_TYPE0_FUNC_SHF          8
+#define PCI_CFG_TYPE0_REG_SHF		0
+#define PCI_CFG_TYPE0_FUNC_SHF		8
 
 /* Type 1 */
-#define PCI_CFG_TYPE1_REG_SHF           0
-#define PCI_CFG_TYPE1_FUNC_SHF          8
-#define PCI_CFG_TYPE1_DEV_SHF           11
-#define PCI_CFG_TYPE1_BUS_SHF           16
+#define PCI_CFG_TYPE1_REG_SHF		0
+#define PCI_CFG_TYPE1_FUNC_SHF		8
+#define PCI_CFG_TYPE1_DEV_SHF		11
+#define PCI_CFG_TYPE1_BUS_SHF		16
 
 static int msc_pcibios_config_access(unsigned char access_type,
 	struct pci_bus *bus, unsigned int devfn, int where, u32 * data)
@@ -97,7 +97,7 @@
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
 	if (msc_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
-	                              &data))
+				      &data))
 		return -1;
 
 	if (size == 1)
@@ -124,7 +124,7 @@
 		data = val;
 	else {
 		if (msc_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
-		                              where, &data))
+					      where, &data))
 			return -1;
 
 		if (size == 1)
diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c
index 99929cf8..499e35c 100644
--- a/arch/mips/pci/ops-nile4.c
+++ b/arch/mips/pci/ops-nile4.c
@@ -6,7 +6,7 @@
 #include <asm/lasat/lasat.h>
 #include <asm/nile4.h>
 
-#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_READ	 0
 #define PCI_ACCESS_WRITE 1
 
 #define LO(reg) (reg / 4)
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 389bf66..d0b6f83 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -9,8 +9,8 @@
  * Much of the code is derived from the original DDB5074 port by
  * Geert Uytterhoeven <geert@sonycom.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  *
@@ -57,18 +57,18 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Prints the count of how many times each PCI
- *               interrupt has asserted. Can be invoked by the
- *               /proc filesystem.
+ *		 interrupt has asserted. Can be invoked by the
+ *		 /proc filesystem.
  *
- *  INPUTS:      page    - part of STDOUT calculation
- *               off     - part of STDOUT calculation
- *               count   - part of STDOUT calculation
- *               data    - unused
+ *  INPUTS:	 page	 - part of STDOUT calculation
+ *		 off	 - part of STDOUT calculation
+ *		 count	 - part of STDOUT calculation
+ *		 data	 - unused
  *
- *  OUTPUTS:     start   - new start location
- *               eof     - end of file pointer
+ *  OUTPUTS:	 start	 - new start location
+ *		 eof	 - end of file pointer
  *
- *  RETURNS:     len     - STDOUT length
+ *  RETURNS:	 len	 - STDOUT length
  *
  ****************************************************************************/
 static int read_msp_pci_counts(char *page, char **start, off_t off,
@@ -106,21 +106,21 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Generates a configuration write cycle for debug purposes.
- *               The IDSEL line asserted and location and data written are
- *               immaterial. Just want to be able to prove that a
- *               configuration write can be correctly generated on the
- *               PCI bus.  Intent is that this function by invocable from
- *               the /proc filesystem.
+ *		 The IDSEL line asserted and location and data written are
+ *		 immaterial. Just want to be able to prove that a
+ *		 configuration write can be correctly generated on the
+ *		 PCI bus.  Intent is that this function by invocable from
+ *		 the /proc filesystem.
  *
- *  INPUTS:      page    - part of STDOUT calculation
- *               off     - part of STDOUT calculation
- *               count   - part of STDOUT calculation
- *               data    - unused
+ *  INPUTS:	 page	 - part of STDOUT calculation
+ *		 off	 - part of STDOUT calculation
+ *		 count	 - part of STDOUT calculation
+ *		 data	 - unused
  *
- *  OUTPUTS:     start   - new start location
- *               eof     - end of file pointer
+ *  OUTPUTS:	 start	 - new start location
+ *		 eof	 - end of file pointer
  *
- *  RETURNS:     len     - STDOUT length
+ *  RETURNS:	 len	 - STDOUT length
  *
  ****************************************************************************/
 static int gen_pci_cfg_wr(char *page, char **start, off_t off,
@@ -190,11 +190,11 @@
  *
  *  DESCRIPTION: Create entries in the /proc filesystem for debug access.
  *
- *  INPUTS:      none
+ *  INPUTS:	 none
  *
- *  OUTPUTS:     none
+ *  OUTPUTS:	 none
  *
- *  RETURNS:     none
+ *  RETURNS:	 none
  *
  ****************************************************************************/
 static void pci_proc_init(void)
@@ -214,44 +214,44 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Defines the address range that pciauto() will use to
- *               assign to the I/O BARs of PCI devices.
+ *		 assign to the I/O BARs of PCI devices.
  *
- *               Use the start and end addresses of the MSP7120 PCI Host
- *               Controller I/O space, in the form that they appear on the
- *               PCI bus AFTER MSP7120 has performed address translation.
+ *		 Use the start and end addresses of the MSP7120 PCI Host
+ *		 Controller I/O space, in the form that they appear on the
+ *		 PCI bus AFTER MSP7120 has performed address translation.
  *
- *               For I/O accesses, MSP7120 ignores OATRAN and maps I/O
- *               accesses into the bottom 0xFFF region of address space,
- *               so that is the range to put into the pci_io_resource
- *               struct.
+ *		 For I/O accesses, MSP7120 ignores OATRAN and maps I/O
+ *		 accesses into the bottom 0xFFF region of address space,
+ *		 so that is the range to put into the pci_io_resource
+ *		 struct.
  *
- *               In MSP4200, the start address was 0x04 instead of the
- * 		 expected 0x00. Will just assume there was a good reason
- * 		 for this!
+ *		 In MSP4200, the start address was 0x04 instead of the
+ *		 expected 0x00. Will just assume there was a good reason
+ *		 for this!
  *
- *  NOTES:       Linux, by default, will assign I/O space to the lowest
- *               region of address space. Since MSP7120 and Linux,
- *               by default, have no offset in between how they map, the
- *               io_offset element of pci_controller struct should be set
- *               to zero.
+ *  NOTES:	 Linux, by default, will assign I/O space to the lowest
+ *		 region of address space. Since MSP7120 and Linux,
+ *		 by default, have no offset in between how they map, the
+ *		 io_offset element of pci_controller struct should be set
+ *		 to zero.
  *  ELEMENTS:
- *    name       - String used for a meaningful name.
+ *    name	 - String used for a meaningful name.
  *
- *    start      - Start address of MSP7120's I/O space, as MSP7120 presents
- *                 the address on the PCI bus.
+ *    start	 - Start address of MSP7120's I/O space, as MSP7120 presents
+ *		   the address on the PCI bus.
  *
- *    end        - End address of MSP7120's I/O space, as MSP7120 presents
- *                 the address on the PCI bus.
+ *    end	 - End address of MSP7120's I/O space, as MSP7120 presents
+ *		   the address on the PCI bus.
  *
- *    flags      - Attributes indicating the type of resource. In this case,
- *                 indicate I/O space.
+ *    flags	 - Attributes indicating the type of resource. In this case,
+ *		   indicate I/O space.
  *
  ****************************************************************************/
 static struct resource pci_io_resource = {
 	.name	= "pci IO space",
 	.start	= 0x04,
 	.end	= 0x0FFF,
-	.flags	= IORESOURCE_IO	/* I/O space */
+	.flags	= IORESOURCE_IO /* I/O space */
 };
 
 /*****************************************************************************
@@ -260,26 +260,26 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Defines the address range that pciauto() will use to
- *               assign to the memory BARs of PCI devices.
+ *		 assign to the memory BARs of PCI devices.
  *
- *               The .start and .end values are dependent upon how address
- *               translation is performed by the OATRAN regiser.
+ *		 The .start and .end values are dependent upon how address
+ *		 translation is performed by the OATRAN regiser.
  *
- *               The values to use for .start and .end are the values
- *               in the form they appear on the PCI bus AFTER MSP7120 has
- *               performed OATRAN address translation.
+ *		 The values to use for .start and .end are the values
+ *		 in the form they appear on the PCI bus AFTER MSP7120 has
+ *		 performed OATRAN address translation.
  *
  *  ELEMENTS:
- *    name       - String used for a meaningful name.
+ *    name	 - String used for a meaningful name.
  *
- *    start      - Start address of MSP7120's memory space, as MSP7120 presents
- *                 the address on the PCI bus.
+ *    start	 - Start address of MSP7120's memory space, as MSP7120 presents
+ *		   the address on the PCI bus.
  *
- *    end        - End address of MSP7120's memory space, as MSP7120 presents
- *                 the address on the PCI bus.
+ *    end	 - End address of MSP7120's memory space, as MSP7120 presents
+ *		   the address on the PCI bus.
  *
- *    flags      - Attributes indicating the type of resource. In this case,
- *                 indicate memory space.
+ *    flags	 - Attributes indicating the type of resource. In this case,
+ *		   indicate memory space.
  *
  ****************************************************************************/
 static struct resource pci_mem_resource = {
@@ -295,17 +295,17 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: PCI status interrupt handler. Updates the count of how
- *               many times each status bit has been set, then clears
- *               the status bits. If the appropriate macros are defined,
- *               these counts can be viewed via the /proc filesystem.
+ *		 many times each status bit has been set, then clears
+ *		 the status bits. If the appropriate macros are defined,
+ *		 these counts can be viewed via the /proc filesystem.
  *
- *  INPUTS:      irq     - unused
- *               dev_id  - unused
- *               pt_regs - unused
+ *  INPUTS:	 irq	 - unused
+ *		 dev_id	 - unused
+ *		 pt_regs - unused
  *
- *  OUTPUTS:     none
+ *  OUTPUTS:	 none
  *
- *  RETURNS:     PCIBIOS_SUCCESSFUL  - success
+ *  RETURNS:	 PCIBIOS_SUCCESSFUL  - success
  *
  ****************************************************************************/
 static irqreturn_t bpci_interrupt(int irq, void *dev_id)
@@ -335,41 +335,41 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Performs a PCI configuration access (rd or wr), then
- *               checks that the access succeeded by querying MSP7120's
- *               PCI status bits.
+ *		 checks that the access succeeded by querying MSP7120's
+ *		 PCI status bits.
  *
  *  INPUTS:
- *               access_type  - kind of PCI configuration cycle to perform
- *                              (read or write). Legal values are
- *                              PCI_ACCESS_WRITE and PCI_ACCESS_READ.
+ *		 access_type  - kind of PCI configuration cycle to perform
+ *				(read or write). Legal values are
+ *				PCI_ACCESS_WRITE and PCI_ACCESS_READ.
  *
- *               bus          - pointer to the bus number of the device to
- *                              be targeted for the configuration cycle.
- *                              The only element of the pci_bus structure
- *                              used is bus->number. This argument determines
- *                              if the configuration access will be Type 0 or
- *                              Type 1. Since MSP7120 assumes itself to be the
- *                              PCI Host, any non-zero bus->number generates
- *                              a Type 1 access.
+ *		 bus	      - pointer to the bus number of the device to
+ *				be targeted for the configuration cycle.
+ *				The only element of the pci_bus structure
+ *				used is bus->number. This argument determines
+ *				if the configuration access will be Type 0 or
+ *				Type 1. Since MSP7120 assumes itself to be the
+ *				PCI Host, any non-zero bus->number generates
+ *				a Type 1 access.
  *
- *               devfn        - this is an 8-bit field. The lower three bits
- *                              specify the function number of the device to
- *                              be targeted for the configuration cycle, with
- *                              all three-bit combinations being legal. The
- *                              upper five bits specify the device number,
- *                              with legal values being 10 to 31.
+ *		 devfn	      - this is an 8-bit field. The lower three bits
+ *				specify the function number of the device to
+ *				be targeted for the configuration cycle, with
+ *				all three-bit combinations being legal. The
+ *				upper five bits specify the device number,
+ *				with legal values being 10 to 31.
  *
- *               where        - address within the Configuration Header
- *                              space to access.
+ *		 where	      - address within the Configuration Header
+ *				space to access.
  *
- *               data         - for write accesses, contains the data to
- *                              write.
+ *		 data	      - for write accesses, contains the data to
+ *				write.
  *
  *  OUTPUTS:
- *               data         - for read accesses, contains the value read.
+ *		 data	      - for read accesses, contains the value read.
  *
- *  RETURNS:     PCIBIOS_SUCCESSFUL  - success
- *               -1                  - access failure
+ *  RETURNS:	 PCIBIOS_SUCCESSFUL  - success
+ *		 -1		     - access failure
  *
  ****************************************************************************/
 int msp_pcibios_config_access(unsigned char access_type,
@@ -429,7 +429,7 @@
 	 * for this Block Copy, called Block Copy 0 Fault (BC0F) and
 	 * Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this
 	 * dedicated Block Copy block, so these two interrupts are now
-	 * marked reserved. In case the  Block Copy is resurrected in a
+	 * marked reserved. In case the	 Block Copy is resurrected in a
 	 * future design, maintain the code that treats these two interrupts
 	 * specially.
 	 *
@@ -439,7 +439,7 @@
 	preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
 
 	/* Setup address that is to appear on PCI bus */
-	preg->config_addr = BPCI_CFGADDR_ENABLE	|
+	preg->config_addr = BPCI_CFGADDR_ENABLE |
 		(bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
 		(dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
 		(where & 0xFC);
@@ -494,21 +494,21 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Read a byte from PCI configuration address spac
- *               Since the hardware can't address 8 bit chunks
- *               directly, read a 32-bit chunk, then mask off extraneous
- *               bits.
+ *		 Since the hardware can't address 8 bit chunks
+ *		 directly, read a 32-bit chunk, then mask off extraneous
+ *		 bits.
  *
- *  INPUTS       bus    - structure containing attributes for the PCI bus
- *                        that the read is destined for.
- *               devfn  - device/function combination that the read is
- *                        destined for.
- *               where  - register within the Configuration Header space
- *                        to access.
+ *  INPUTS	 bus	- structure containing attributes for the PCI bus
+ *			  that the read is destined for.
+ *		 devfn	- device/function combination that the read is
+ *			  destined for.
+ *		 where	- register within the Configuration Header space
+ *			  to access.
  *
- *  OUTPUTS      val    - read data
+ *  OUTPUTS	 val	- read data
  *
- *  RETURNS:     PCIBIOS_SUCCESSFUL  - success
- *               -1                  - read access failure
+ *  RETURNS:	 PCIBIOS_SUCCESSFUL  - success
+ *		 -1		     - read access failure
  *
  ****************************************************************************/
 static int
@@ -541,22 +541,22 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Read a word (16 bits) from PCI configuration address space.
- *               Since the hardware can't address 16 bit chunks
- *               directly, read a 32-bit chunk, then mask off extraneous
- *               bits.
+ *		 Since the hardware can't address 16 bit chunks
+ *		 directly, read a 32-bit chunk, then mask off extraneous
+ *		 bits.
  *
- *  INPUTS       bus    - structure containing attributes for the PCI bus
- *                        that the read is destined for.
- *               devfn  - device/function combination that the read is
- *                        destined for.
- *               where  - register within the Configuration Header space
- *                        to access.
+ *  INPUTS	 bus	- structure containing attributes for the PCI bus
+ *			  that the read is destined for.
+ *		 devfn	- device/function combination that the read is
+ *			  destined for.
+ *		 where	- register within the Configuration Header space
+ *			  to access.
  *
- *  OUTPUTS      val    - read data
+ *  OUTPUTS	 val	- read data
  *
- *  RETURNS:     PCIBIOS_SUCCESSFUL           - success
- *               PCIBIOS_BAD_REGISTER_NUMBER  - bad register address
- *               -1                           - read access failure
+ *  RETURNS:	 PCIBIOS_SUCCESSFUL	      - success
+ *		 PCIBIOS_BAD_REGISTER_NUMBER  - bad register address
+ *		 -1			      - read access failure
  *
  ****************************************************************************/
 static int
@@ -600,20 +600,20 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Read a double word (32 bits) from PCI configuration
- *               address space.
+ *		 address space.
  *
- *  INPUTS       bus    - structure containing attributes for the PCI bus
- *                        that the read is destined for.
- *               devfn  - device/function combination that the read is
- *                        destined for.
- *               where  - register within the Configuration Header space
- *                        to access.
+ *  INPUTS	 bus	- structure containing attributes for the PCI bus
+ *			  that the read is destined for.
+ *		 devfn	- device/function combination that the read is
+ *			  destined for.
+ *		 where	- register within the Configuration Header space
+ *			  to access.
  *
- *  OUTPUTS      val    - read data
+ *  OUTPUTS	 val	- read data
  *
- *  RETURNS:     PCIBIOS_SUCCESSFUL           - success
- *               PCIBIOS_BAD_REGISTER_NUMBER  - bad register address
- *               -1                           - read access failure
+ *  RETURNS:	 PCIBIOS_SUCCESSFUL	      - success
+ *		 PCIBIOS_BAD_REGISTER_NUMBER  - bad register address
+ *		 -1			      - read access failure
  *
  ****************************************************************************/
 static int
@@ -652,21 +652,21 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Write a byte to PCI configuration address space.
- *               Since the hardware can't address 8 bit chunks
- *               directly, a read-modify-write is performed.
+ *		 Since the hardware can't address 8 bit chunks
+ *		 directly, a read-modify-write is performed.
  *
- *  INPUTS       bus    - structure containing attributes for the PCI bus
- *                        that the write is destined for.
- *               devfn  - device/function combination that the write is
- *                        destined for.
- *               where  - register within the Configuration Header space
- *                        to access.
- *               val    - value to write
+ *  INPUTS	 bus	- structure containing attributes for the PCI bus
+ *			  that the write is destined for.
+ *		 devfn	- device/function combination that the write is
+ *			  destined for.
+ *		 where	- register within the Configuration Header space
+ *			  to access.
+ *		 val	- value to write
  *
- *  OUTPUTS      none
+ *  OUTPUTS	 none
  *
- *  RETURNS:     PCIBIOS_SUCCESSFUL  - success
- *               -1                  - write access failure
+ *  RETURNS:	 PCIBIOS_SUCCESSFUL  - success
+ *		 -1		     - write access failure
  *
  ****************************************************************************/
 static int
@@ -700,22 +700,22 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Write a word (16-bits) to PCI configuration address space.
- *               Since the hardware can't address 16 bit chunks
- *               directly, a read-modify-write is performed.
+ *		 Since the hardware can't address 16 bit chunks
+ *		 directly, a read-modify-write is performed.
  *
- *  INPUTS       bus    - structure containing attributes for the PCI bus
- *                        that the write is destined for.
- *               devfn  - device/function combination that the write is
- *                        destined for.
- *               where  - register within the Configuration Header space
- *                        to access.
- *               val    - value to write
+ *  INPUTS	 bus	- structure containing attributes for the PCI bus
+ *			  that the write is destined for.
+ *		 devfn	- device/function combination that the write is
+ *			  destined for.
+ *		 where	- register within the Configuration Header space
+ *			  to access.
+ *		 val	- value to write
  *
- *  OUTPUTS      none
+ *  OUTPUTS	 none
  *
- *  RETURNS:     PCIBIOS_SUCCESSFUL           - success
- *               PCIBIOS_BAD_REGISTER_NUMBER  - bad register address
- *               -1                           - write access failure
+ *  RETURNS:	 PCIBIOS_SUCCESSFUL	      - success
+ *		 PCIBIOS_BAD_REGISTER_NUMBER  - bad register address
+ *		 -1			      - write access failure
  *
  ****************************************************************************/
 static int
@@ -753,21 +753,21 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Write a double word (32-bits) to PCI configuration address
- *               space.
+ *		 space.
  *
- *  INPUTS       bus    - structure containing attributes for the PCI bus
- *                        that the write is destined for.
- *               devfn  - device/function combination that the write is
- *                        destined for.
- *               where  - register within the Configuration Header space
- *                        to access.
- *               val    - value to write
+ *  INPUTS	 bus	- structure containing attributes for the PCI bus
+ *			  that the write is destined for.
+ *		 devfn	- device/function combination that the write is
+ *			  destined for.
+ *		 where	- register within the Configuration Header space
+ *			  to access.
+ *		 val	- value to write
  *
- *  OUTPUTS      none
+ *  OUTPUTS	 none
  *
- *  RETURNS:     PCIBIOS_SUCCESSFUL           - success
- *               PCIBIOS_BAD_REGISTER_NUMBER  - bad register address
- *               -1                           - write access failure
+ *  RETURNS:	 PCIBIOS_SUCCESSFUL	      - success
+ *		 PCIBIOS_BAD_REGISTER_NUMBER  - bad register address
+ *		 -1			      - write access failure
  *
  ****************************************************************************/
 static int
@@ -794,22 +794,22 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Interface the PCI configuration read request with
- *               the appropriate function, based on how many bytes
- *               the read request is.
+ *		 the appropriate function, based on how many bytes
+ *		 the read request is.
  *
- *  INPUTS       bus    - structure containing attributes for the PCI bus
- *                        that the write is destined for.
- *               devfn  - device/function combination that the write is
- *                        destined for.
- *               where  - register within the Configuration Header space
- *                        to access.
- *               size   - in units of bytes, should be 1, 2, or 4.
+ *  INPUTS	 bus	- structure containing attributes for the PCI bus
+ *			  that the write is destined for.
+ *		 devfn	- device/function combination that the write is
+ *			  destined for.
+ *		 where	- register within the Configuration Header space
+ *			  to access.
+ *		 size	- in units of bytes, should be 1, 2, or 4.
  *
- *  OUTPUTS      val    - value read, with any extraneous bytes masked
- *                        to zero.
+ *  OUTPUTS	 val	- value read, with any extraneous bytes masked
+ *			  to zero.
  *
- *  RETURNS:     PCIBIOS_SUCCESSFUL   - success
- *               -1                   - failure
+ *  RETURNS:	 PCIBIOS_SUCCESSFUL   - success
+ *		 -1		      - failure
  *
  ****************************************************************************/
 int
@@ -845,22 +845,22 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Interface the PCI configuration write request with
- *               the appropriate function, based on how many bytes
- *               the read request is.
+ *		 the appropriate function, based on how many bytes
+ *		 the read request is.
  *
- *  INPUTS       bus    - structure containing attributes for the PCI bus
- *                        that the write is destined for.
- *               devfn  - device/function combination that the write is
- *                        destined for.
- *               where  - register within the Configuration Header space
- *                        to access.
- *               size   - in units of bytes, should be 1, 2, or 4.
- *               val    - value to write
+ *  INPUTS	 bus	- structure containing attributes for the PCI bus
+ *			  that the write is destined for.
+ *		 devfn	- device/function combination that the write is
+ *			  destined for.
+ *		 where	- register within the Configuration Header space
+ *			  to access.
+ *		 size	- in units of bytes, should be 1, 2, or 4.
+ *		 val	- value to write
  *
- *  OUTPUTS:     none
+ *  OUTPUTS:	 none
  *
- *  RETURNS:     PCIBIOS_SUCCESSFUL   - success
- *               -1                   - failure
+ *  RETURNS:	 PCIBIOS_SUCCESSFUL   - success
+ *		 -1		      - failure
  *
  ****************************************************************************/
 int
@@ -897,11 +897,11 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: structure to abstract the hardware specific PCI
- *               configuration accesses.
+ *		 configuration accesses.
  *
  *  ELEMENTS:
- *    read      - function for Linux to generate PCI Configuration reads.
- *    write     - function for Linux to generate PCI Configuration writes.
+ *    read	- function for Linux to generate PCI Configuration reads.
+ *    write	- function for Linux to generate PCI Configuration writes.
  *
  ****************************************************************************/
 struct pci_ops msp_pci_ops = {
@@ -917,27 +917,27 @@
  *  Describes the attributes of the MSP7120 PCI Host Controller
  *
  *  ELEMENTS:
- *    pci_ops      - abstracts the hardware specific PCI configuration
- *                   accesses.
+ *    pci_ops	   - abstracts the hardware specific PCI configuration
+ *		     accesses.
  *
  *    mem_resource - address range pciauto() uses to assign to PCI device
- *                   memory BARs.
+ *		     memory BARs.
  *
  *    mem_offset   - offset between how MSP7120 outbound PCI memory
- *                   transaction addresses appear on the PCI bus and how Linux
- *                   wants to configure memory BARs of the PCI devices.
- *                   MSP7120 does nothing funky, so just set to zero.
+ *		     transaction addresses appear on the PCI bus and how Linux
+ *		     wants to configure memory BARs of the PCI devices.
+ *		     MSP7120 does nothing funky, so just set to zero.
  *
  *    io_resource  - address range pciauto() uses to assign to PCI device
- *                   I/O BARs.
+ *		     I/O BARs.
  *
- *    io_offset    - offset between how MSP7120 outbound PCI I/O
- *                   transaction addresses appear on the PCI bus and how
- *                   Linux defaults to configure I/O BARs of the PCI devices.
- *                   MSP7120 maps outbound I/O accesses into the bottom
- *                   bottom 4K of PCI address space (and ignores OATRAN).
- *                   Since the Linux default is to configure I/O BARs to the
- *                   bottom 4K, no special offset is needed. Just set to zero.
+ *    io_offset	   - offset between how MSP7120 outbound PCI I/O
+ *		     transaction addresses appear on the PCI bus and how
+ *		     Linux defaults to configure I/O BARs of the PCI devices.
+ *		     MSP7120 maps outbound I/O accesses into the bottom
+ *		     bottom 4K of PCI address space (and ignores OATRAN).
+ *		     Since the Linux default is to configure I/O BARs to the
+ *		     bottom 4K, no special offset is needed. Just set to zero.
  *
  ****************************************************************************/
 static struct pci_controller msp_pci_controller = {
@@ -955,7 +955,7 @@
  *  _________________________________________________________________________
  *
  *  DESCRIPTION: Initialize the PCI Host Controller and register it with
- *               Linux so Linux can seize control of the PCI bus.
+ *		 Linux so Linux can seize control of the PCI bus.
  *
  ****************************************************************************/
 void __init msp_pci_init(void)
@@ -979,7 +979,7 @@
 	*(unsigned long *)QFLUSH_REG_1 = 3;
 
 	/* Configure PCI Host Controller. */
-	preg->if_status	= ~0;		/* Clear cause register bits */
+	preg->if_status = ~0;		/* Clear cause register bits */
 	preg->config_addr = 0;		/* Clear config access */
 	preg->oatran	= MSP_PCI_OATRAN; /* PCI outbound addr translation */
 	preg->if_mask	= 0xF8BF87C0;	/* Enable all PCI status interrupts */
diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c
deleted file mode 100644
index 1e6213f..0000000
--- a/arch/mips/pci/ops-pnx8550.c
+++ /dev/null
@@ -1,282 +0,0 @@
-/*
- *
- *  BRIEF MODULE DESCRIPTION
- *
- *  2.6 port, Embedded Alley Solutions, Inc
- *
- *  Based on:
- *  Author: source@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-
-#include <asm/mach-pnx8550/pci.h>
-#include <asm/mach-pnx8550/glb.h>
-
-static inline void clear_status(void)
-{
-	unsigned long pci_stat;
-
-	pci_stat = inl(PCI_BASE | PCI_GPPM_STATUS);
-	outl(pci_stat, PCI_BASE | PCI_GPPM_ICLR);
-}
-
-static inline unsigned int
-calc_cfg_addr(struct pci_bus *bus, unsigned int devfn, int where)
-{
-	unsigned int addr;
-
-	addr = ((bus->number > 0) ? (((bus->number & 0xff) << PCI_CFG_BUS_SHIFT) | 1) : 0);
-	addr |= ((devfn & 0xff) << PCI_CFG_FUNC_SHIFT) | (where & 0xfc);
-
-	return addr;
-}
-
-static int
-config_access(unsigned int pci_cmd, struct pci_bus *bus, unsigned int devfn, int where, unsigned int pci_mode, unsigned int *val)
-{
-	unsigned int flags;
-	unsigned long loops = 0;
-	unsigned long ioaddr = calc_cfg_addr(bus, devfn, where);
-
-	local_irq_save(flags);
-	/*Clear pending interrupt status */
-	if (inl(PCI_BASE | PCI_GPPM_STATUS)) {
-		clear_status();
-		while (!(inl(PCI_BASE | PCI_GPPM_STATUS) == 0)) ;
-	}
-
-	outl(ioaddr, PCI_BASE | PCI_GPPM_ADDR);
-
-	if ((pci_cmd == PCI_CMD_IOW) || (pci_cmd == PCI_CMD_CONFIG_WRITE))
-		outl(*val, PCI_BASE | PCI_GPPM_WDAT);
-
-	outl(INIT_PCI_CYCLE | pci_cmd | (pci_mode & PCI_BYTE_ENABLE_MASK),
-	     PCI_BASE | PCI_GPPM_CTRL);
-
-	loops =
-	    ((loops_per_jiffy *
-	      PCI_IO_JIFFIES_TIMEOUT) >> (PCI_IO_JIFFIES_SHIFT));
-	while (1) {
-		if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_DONE) {
-			if ((pci_cmd == PCI_CMD_IOR) ||
-			    (pci_cmd == PCI_CMD_CONFIG_READ))
-				*val = inl(PCI_BASE | PCI_GPPM_RDAT);
-			clear_status();
-			local_irq_restore(flags);
-			return PCIBIOS_SUCCESSFUL;
-		} else if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_R_MABORT) {
-			break;
-		}
-
-		loops--;
-		if (loops == 0) {
-			printk("%s : Arbiter Locked.\n", __func__);
-		}
-	}
-
-	clear_status();
-	if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_IOW)) {
-		printk("%s timeout (GPPM_CTRL=%X) ioaddr %lX pci_cmd %X\n",
-		       __func__, inl(PCI_BASE | PCI_GPPM_CTRL), ioaddr,
-		       pci_cmd);
-	}
-
-	if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_CONFIG_READ))
-		*val = 0xffffffff;
-	local_irq_restore(flags);
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-/*
- * We can't address 8 and 16 bit words directly.  Instead we have to
- * read/write a 32bit word and mask/modify the data we actually want.
- */
-static int
-read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
-{
-	unsigned int data = 0;
-	int err;
-
-	if (bus == NULL)
-		return -1;
-
-	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
-	switch (where & 0x03) {
-	case 0:
-		*val = (unsigned char)(data & 0x000000ff);
-		break;
-	case 1:
-		*val = (unsigned char)((data & 0x0000ff00) >> 8);
-		break;
-	case 2:
-		*val = (unsigned char)((data & 0x00ff0000) >> 16);
-		break;
-	case 3:
-		*val = (unsigned char)((data & 0xff000000) >> 24);
-		break;
-	}
-
-	return err;
-}
-
-static int
-read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
-{
-	unsigned int data = 0;
-	int err;
-
-	if (bus == NULL)
-		return -1;
-
-	if (where & 0x01)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(3 << (where & 3)), &data);
-	switch (where & 0x02) {
-	case 0:
-		*val = (unsigned short)(data & 0x0000ffff);
-		break;
-	case 2:
-		*val = (unsigned short)((data & 0xffff0000) >> 16);
-		break;
-	}
-
-	return err;
-}
-
-static int
-read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
-{
-	int err;
-	if (bus == NULL)
-		return -1;
-
-	if (where & 0x03)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, 0, val);
-
-	return err;
-}
-
-static int
-write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
-{
-	unsigned int data = (unsigned int)val;
-	int err;
-
-	if (bus == NULL)
-		return -1;
-
-	switch (where & 0x03) {
-	case 1:
-		data = (data << 8);
-		break;
-	case 2:
-		data = (data << 16);
-		break;
-	case 3:
-		data = (data << 24);
-		break;
-	default:
-		break;
-	}
-
-	err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, ~(1 << (where & 3)), &data);
-
-	return err;
-}
-
-static int
-write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
-{
-	unsigned int data = (unsigned int)val;
-	int err;
-
-	if (bus == NULL)
-		return -1;
-
-	if (where & 0x01)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	switch (where & 0x02) {
-	case 2:
-		data = (data << 16);
-		break;
-	default:
-		break;
-	}
-	err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, ~(3 << (where & 3)), &data);
-
-	return err;
-}
-
-static int
-write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
-{
-	int err;
-	if (bus == NULL)
-		return -1;
-
-	if (where & 0x03)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, 0, &val);
-
-	return err;
-}
-
-static int config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
-{
-	switch (size) {
-	case 1: {
-			u8 _val;
-			int rc = read_config_byte(bus, devfn, where, &_val);
-			*val = _val;
-			return rc;
-		}
-       case 2: {
-			u16 _val;
-			int rc = read_config_word(bus, devfn, where, &_val);
-			*val = _val;
-			return rc;
-		}
-	default:
-		return read_config_dword(bus, devfn, where, val);
-	}
-}
-
-static int config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-{
-	switch (size) {
-	case 1:
-		return write_config_byte(bus, devfn, where, (u8) val);
-	case 2:
-		return write_config_word(bus, devfn, where, (u16) val);
-	default:
-		return write_config_dword(bus, devfn, where, val);
-	}
-}
-
-struct pci_ops pnx8550_pci_ops = {
-	config_read,
-	config_write
-};
diff --git a/arch/mips/pci/ops-rc32434.c b/arch/mips/pci/ops-rc32434.c
index d1f8fa2..7c7182e 100644
--- a/arch/mips/pci/ops-rc32434.c
+++ b/arch/mips/pci/ops-rc32434.c
@@ -35,7 +35,7 @@
 #include <asm/mach-rc32434/rc32434.h>
 #include <asm/mach-rc32434/pci.h>
 
-#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_READ	 0
 #define PCI_ACCESS_WRITE 1
 
 
diff --git a/arch/mips/pci/ops-sni.c b/arch/mips/pci/ops-sni.c
index 97ed25b..35daa7f 100644
--- a/arch/mips/pci/ops-sni.c
+++ b/arch/mips/pci/ops-sni.c
@@ -14,8 +14,8 @@
 
 /*
  * It seems that on the RM200 only lower 3 bits of the 5 bit PCI device
- * address are decoded.  We therefore manually have to reject attempts at
- * reading outside this range.  Being on the paranoid side we only do this
+ * address are decoded.	 We therefore manually have to reject attempts at
+ * reading outside this range.	Being on the paranoid side we only do this
  * test for bus 0 and hope forwarding and decoding work properly for any
  * subordinated busses.
  *
@@ -31,8 +31,8 @@
 
 	*(volatile u32 *)PCIMT_CONFIG_ADDRESS =
 		 ((busno    & 0xff) << 16) |
-	         ((devfn    & 0xff) <<  8) |
-	          (reg      & 0xfc);
+		 ((devfn    & 0xff) <<	8) |
+		  (reg	    & 0xfc);
 
 	return PCIBIOS_SUCCESSFUL;
 }
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index 0d69d6f..3d5df51 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -2,16 +2,16 @@
  * Define the pci_ops for the PCIC on Toshiba TX4927, TX4938, etc.
  *
  * Based on linux/arch/mips/pci/ops-tx4938.c,
- *          linux/arch/mips/pci/fixup-rbtx4938.c,
- *          linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    linux/arch/mips/pci/fixup-rbtx4938.c,
+ *	    linux/arch/mips/txx9/rbtx4938/setup.c,
  *	    and RBTX49xx patch from CELF patch archive.
  *
  * 2003-2005 (c) MontaVista Software, Inc.
  * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
  * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/pci/ops-vr41xx.c b/arch/mips/pci/ops-vr41xx.c
index 28962a7..551128c 100644
--- a/arch/mips/pci/ops-vr41xx.c
+++ b/arch/mips/pci/ops-vr41xx.c
@@ -33,7 +33,7 @@
 #define PCICONFAREG	(void __iomem *)KSEG1ADDR(0x0f000c18)
 
 static inline int set_pci_configuration_address(unsigned char number,
-                                                unsigned int devfn, int where)
+						unsigned int devfn, int where)
 {
 	if (number == 0) {
 		/*
@@ -59,7 +59,7 @@
 }
 
 static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
-                           int size, uint32_t *val)
+			   int size, uint32_t *val)
 {
 	uint32_t data;
 
@@ -87,7 +87,7 @@
 }
 
 static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
-                            int size, uint32_t val)
+			    int size, uint32_t val)
 {
 	uint32_t data;
 	int shift;
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index c4ea6cc..38a80c8 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -29,7 +29,7 @@
 #define PCI_ACCESS_WRITE	1
 
 struct alchemy_pci_context {
-	struct pci_controller alchemy_pci_ctrl;	/* leave as first member! */
+	struct pci_controller alchemy_pci_ctrl; /* leave as first member! */
 	void __iomem *regs;			/* ctrl base */
 	/* tools for wired entry for config space access */
 	unsigned long last_elo0;
@@ -381,7 +381,7 @@
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!r) {
-		dev_err(&pdev->dev, "no  pcictl ctrl regs resource\n");
+		dev_err(&pdev->dev, "no	 pcictl ctrl regs resource\n");
 		ret = -ENODEV;
 		goto out1;
 	}
@@ -482,7 +482,7 @@
 
 static struct platform_driver alchemy_pcictl_driver = {
 	.probe		= alchemy_pci_probe,
-	.driver	= {
+	.driver = {
 		.name	= "alchemy-pci",
 		.owner	= THIS_MODULE,
 	},
diff --git a/arch/mips/pci/pci-ar71xx.c b/arch/mips/pci/pci-ar71xx.c
index 6eaa4f2..412ec02 100644
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -18,26 +18,11 @@
 #include <linux/pci.h>
 #include <linux/pci_regs.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach-ath79/ar71xx_regs.h>
 #include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/pci.h>
-
-#define AR71XX_PCI_MEM_BASE	0x10000000
-#define AR71XX_PCI_MEM_SIZE	0x07000000
-
-#define AR71XX_PCI_WIN0_OFFS		0x10000000
-#define AR71XX_PCI_WIN1_OFFS		0x11000000
-#define AR71XX_PCI_WIN2_OFFS		0x12000000
-#define AR71XX_PCI_WIN3_OFFS		0x13000000
-#define AR71XX_PCI_WIN4_OFFS		0x14000000
-#define AR71XX_PCI_WIN5_OFFS		0x15000000
-#define AR71XX_PCI_WIN6_OFFS		0x16000000
-#define AR71XX_PCI_WIN7_OFFS		0x07000000
-
-#define AR71XX_PCI_CFG_BASE		\
-	(AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
-#define AR71XX_PCI_CFG_SIZE		0x100
 
 #define AR71XX_PCI_REG_CRP_AD_CBE	0x00
 #define AR71XX_PCI_REG_CRP_WRDATA	0x04
@@ -63,8 +48,15 @@
 
 #define AR71XX_PCI_IRQ_COUNT		5
 
-static DEFINE_SPINLOCK(ar71xx_pci_lock);
-static void __iomem *ar71xx_pcicfg_base;
+struct ar71xx_pci_controller {
+	void __iomem *cfg_base;
+	spinlock_t lock;
+	int irq;
+	int irq_base;
+	struct pci_controller pci_ctrl;
+	struct resource io_res;
+	struct resource mem_res;
+};
 
 /* Byte lane enable bits */
 static const u8 ar71xx_pci_ble_table[4][4] = {
@@ -107,9 +99,18 @@
 	return ret;
 }
 
-static int ar71xx_pci_check_error(int quiet)
+static inline struct ar71xx_pci_controller *
+pci_bus_to_ar71xx_controller(struct pci_bus *bus)
 {
-	void __iomem *base = ar71xx_pcicfg_base;
+	struct pci_controller *hose;
+
+	hose = (struct pci_controller *) bus->sysdata;
+	return container_of(hose, struct ar71xx_pci_controller, pci_ctrl);
+}
+
+static int ar71xx_pci_check_error(struct ar71xx_pci_controller *apc, int quiet)
+{
+	void __iomem *base = apc->cfg_base;
 	u32 pci_err;
 	u32 ahb_err;
 
@@ -144,9 +145,10 @@
 	return !!(ahb_err | pci_err);
 }
 
-static inline void ar71xx_pci_local_write(int where, int size, u32 value)
+static inline void ar71xx_pci_local_write(struct ar71xx_pci_controller *apc,
+					  int where, int size, u32 value)
 {
-	void __iomem *base = ar71xx_pcicfg_base;
+	void __iomem *base = apc->cfg_base;
 	u32 ad_cbe;
 
 	value = value << (8 * (where & 3));
@@ -162,7 +164,8 @@
 					 unsigned int devfn,
 					 int where, int size, u32 cmd)
 {
-	void __iomem *base = ar71xx_pcicfg_base;
+	struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
+	void __iomem *base = apc->cfg_base;
 	u32 addr;
 
 	addr = ar71xx_pci_bus_addr(bus, devfn, where);
@@ -171,13 +174,14 @@
 	__raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0),
 		     base + AR71XX_PCI_REG_CFG_CBE);
 
-	return ar71xx_pci_check_error(1);
+	return ar71xx_pci_check_error(apc, 1);
 }
 
 static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 				  int where, int size, u32 *value)
 {
-	void __iomem *base = ar71xx_pcicfg_base;
+	struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
+	void __iomem *base = apc->cfg_base;
 	unsigned long flags;
 	u32 data;
 	int err;
@@ -186,7 +190,7 @@
 	ret = PCIBIOS_SUCCESSFUL;
 	data = ~0;
 
-	spin_lock_irqsave(&ar71xx_pci_lock, flags);
+	spin_lock_irqsave(&apc->lock, flags);
 
 	err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
 				     AR71XX_PCI_CFG_CMD_READ);
@@ -195,7 +199,7 @@
 	else
 		data = __raw_readl(base + AR71XX_PCI_REG_CFG_RDDATA);
 
-	spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
+	spin_unlock_irqrestore(&apc->lock, flags);
 
 	*value = (data >> (8 * (where & 3))) & ar71xx_pci_read_mask[size & 7];
 
@@ -205,7 +209,8 @@
 static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 				   int where, int size, u32 value)
 {
-	void __iomem *base = ar71xx_pcicfg_base;
+	struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
+	void __iomem *base = apc->cfg_base;
 	unsigned long flags;
 	int err;
 	int ret;
@@ -213,7 +218,7 @@
 	value = value << (8 * (where & 3));
 	ret = PCIBIOS_SUCCESSFUL;
 
-	spin_lock_irqsave(&ar71xx_pci_lock, flags);
+	spin_lock_irqsave(&apc->lock, flags);
 
 	err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
 				     AR71XX_PCI_CFG_CMD_WRITE);
@@ -222,7 +227,7 @@
 	else
 		__raw_writel(value, base + AR71XX_PCI_REG_CFG_WRDATA);
 
-	spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
+	spin_unlock_irqrestore(&apc->lock, flags);
 
 	return ret;
 }
@@ -232,45 +237,28 @@
 	.write	= ar71xx_pci_write_config,
 };
 
-static struct resource ar71xx_pci_io_resource = {
-	.name		= "PCI IO space",
-	.start		= 0,
-	.end		= 0,
-	.flags		= IORESOURCE_IO,
-};
-
-static struct resource ar71xx_pci_mem_resource = {
-	.name		= "PCI memory space",
-	.start		= AR71XX_PCI_MEM_BASE,
-	.end		= AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1,
-	.flags		= IORESOURCE_MEM
-};
-
-static struct pci_controller ar71xx_pci_controller = {
-	.pci_ops	= &ar71xx_pci_ops,
-	.mem_resource	= &ar71xx_pci_mem_resource,
-	.io_resource	= &ar71xx_pci_io_resource,
-};
-
 static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
+	struct ar71xx_pci_controller *apc;
 	void __iomem *base = ath79_reset_base;
 	u32 pending;
 
+	apc = irq_get_handler_data(irq);
+
 	pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
 		  __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
 
 	if (pending & AR71XX_PCI_INT_DEV0)
-		generic_handle_irq(ATH79_PCI_IRQ(0));
+		generic_handle_irq(apc->irq_base + 0);
 
 	else if (pending & AR71XX_PCI_INT_DEV1)
-		generic_handle_irq(ATH79_PCI_IRQ(1));
+		generic_handle_irq(apc->irq_base + 1);
 
 	else if (pending & AR71XX_PCI_INT_DEV2)
-		generic_handle_irq(ATH79_PCI_IRQ(2));
+		generic_handle_irq(apc->irq_base + 2);
 
 	else if (pending & AR71XX_PCI_INT_CORE)
-		generic_handle_irq(ATH79_PCI_IRQ(4));
+		generic_handle_irq(apc->irq_base + 4);
 
 	else
 		spurious_interrupt();
@@ -278,10 +266,14 @@
 
 static void ar71xx_pci_irq_unmask(struct irq_data *d)
 {
-	unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE;
+	struct ar71xx_pci_controller *apc;
+	unsigned int irq;
 	void __iomem *base = ath79_reset_base;
 	u32 t;
 
+	apc = irq_data_get_irq_chip_data(d);
+	irq = d->irq - apc->irq_base;
+
 	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
 	__raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
 
@@ -291,10 +283,14 @@
 
 static void ar71xx_pci_irq_mask(struct irq_data *d)
 {
-	unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE;
+	struct ar71xx_pci_controller *apc;
+	unsigned int irq;
 	void __iomem *base = ath79_reset_base;
 	u32 t;
 
+	apc = irq_data_get_irq_chip_data(d);
+	irq = d->irq - apc->irq_base;
+
 	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
 	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
 
@@ -309,7 +305,7 @@
 	.irq_mask_ack	= ar71xx_pci_irq_mask,
 };
 
-static __init void ar71xx_pci_irq_init(void)
+static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
 {
 	void __iomem *base = ath79_reset_base;
 	int i;
@@ -319,15 +315,19 @@
 
 	BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT);
 
-	for (i = ATH79_PCI_IRQ_BASE;
-	     i < ATH79_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++)
+	apc->irq_base = ATH79_PCI_IRQ_BASE;
+	for (i = apc->irq_base;
+	     i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) {
 		irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
 					 handle_level_irq);
+		irq_set_chip_data(i, apc);
+	}
 
-	irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar71xx_pci_irq_handler);
+	irq_set_handler_data(apc->irq, apc);
+	irq_set_chained_handler(apc->irq, ar71xx_pci_irq_handler);
 }
 
-static __init void ar71xx_pci_reset(void)
+static void ar71xx_pci_reset(void)
 {
 	void __iomem *ddr_base = ath79_ddr_base;
 
@@ -349,27 +349,83 @@
 	mdelay(100);
 }
 
-__init int ar71xx_pcibios_init(void)
+static int ar71xx_pci_probe(struct platform_device *pdev)
 {
+	struct ar71xx_pci_controller *apc;
+	struct resource *res;
 	u32 t;
 
-	ar71xx_pcicfg_base = ioremap(AR71XX_PCI_CFG_BASE, AR71XX_PCI_CFG_SIZE);
-	if (ar71xx_pcicfg_base == NULL)
+	apc = devm_kzalloc(&pdev->dev, sizeof(struct ar71xx_pci_controller),
+			   GFP_KERNEL);
+	if (!apc)
 		return -ENOMEM;
 
+	spin_lock_init(&apc->lock);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
+	if (!res)
+		return -EINVAL;
+
+	apc->cfg_base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!apc->cfg_base)
+		return -ENOMEM;
+
+	apc->irq = platform_get_irq(pdev, 0);
+	if (apc->irq < 0)
+		return -EINVAL;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
+	if (!res)
+		return -EINVAL;
+
+	apc->io_res.parent = res;
+	apc->io_res.name = "PCI IO space";
+	apc->io_res.start = res->start;
+	apc->io_res.end = res->end;
+	apc->io_res.flags = IORESOURCE_IO;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
+	if (!res)
+		return -EINVAL;
+
+	apc->mem_res.parent = res;
+	apc->mem_res.name = "PCI memory space";
+	apc->mem_res.start = res->start;
+	apc->mem_res.end = res->end;
+	apc->mem_res.flags = IORESOURCE_MEM;
+
 	ar71xx_pci_reset();
 
 	/* setup COMMAND register */
 	t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
 	  | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
-	ar71xx_pci_local_write(PCI_COMMAND, 4, t);
+	ar71xx_pci_local_write(apc, PCI_COMMAND, 4, t);
 
 	/* clear bus errors */
-	ar71xx_pci_check_error(1);
+	ar71xx_pci_check_error(apc, 1);
 
-	ar71xx_pci_irq_init();
+	ar71xx_pci_irq_init(apc);
 
-	register_pci_controller(&ar71xx_pci_controller);
+	apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
+	apc->pci_ctrl.mem_resource = &apc->mem_res;
+	apc->pci_ctrl.io_resource = &apc->io_res;
+
+	register_pci_controller(&apc->pci_ctrl);
 
 	return 0;
 }
+
+static struct platform_driver ar71xx_pci_driver = {
+	.probe = ar71xx_pci_probe,
+	.driver = {
+		.name = "ar71xx-pci",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init ar71xx_pci_init(void)
+{
+	return platform_driver_register(&ar71xx_pci_driver);
+}
+
+postcore_initcall(ar71xx_pci_init);
diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c
index c11c75b..8a0700d 100644
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -9,19 +9,13 @@
  *  by the Free Software Foundation.
  */
 
+#include <linux/spinlock.h>
 #include <linux/irq.h>
 #include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/pci.h>
-
-#define AR724X_PCI_CFG_BASE	0x14000000
-#define AR724X_PCI_CFG_SIZE	0x1000
-#define AR724X_PCI_CTRL_BASE	(AR71XX_APB_BASE + 0x000f0000)
-#define AR724X_PCI_CTRL_SIZE	0x100
-
-#define AR724X_PCI_MEM_BASE	0x10000000
-#define AR724X_PCI_MEM_SIZE	0x04000000
 
 #define AR724X_PCI_REG_RESET		0x18
 #define AR724X_PCI_REG_INT_STATUS	0x4c
@@ -35,38 +29,112 @@
 
 #define AR7240_BAR0_WAR_VALUE	0xffff
 
-static DEFINE_SPINLOCK(ar724x_pci_lock);
-static void __iomem *ar724x_pci_devcfg_base;
-static void __iomem *ar724x_pci_ctrl_base;
+#define AR724X_PCI_CMD_INIT	(PCI_COMMAND_MEMORY |		\
+				 PCI_COMMAND_MASTER |		\
+				 PCI_COMMAND_INVALIDATE |	\
+				 PCI_COMMAND_PARITY |		\
+				 PCI_COMMAND_SERR |		\
+				 PCI_COMMAND_FAST_BACK)
 
-static u32 ar724x_pci_bar0_value;
-static bool ar724x_pci_bar0_is_cached;
-static bool ar724x_pci_link_up;
+struct ar724x_pci_controller {
+	void __iomem *devcfg_base;
+	void __iomem *ctrl_base;
+	void __iomem *crp_base;
 
-static inline bool ar724x_pci_check_link(void)
+	int irq;
+	int irq_base;
+
+	bool link_up;
+	bool bar0_is_cached;
+	u32  bar0_value;
+
+	spinlock_t lock;
+
+	struct pci_controller pci_controller;
+	struct resource io_res;
+	struct resource mem_res;
+};
+
+static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
 {
 	u32 reset;
 
-	reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET);
+	reset = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_RESET);
 	return reset & AR724X_PCI_RESET_LINK_UP;
 }
 
+static inline struct ar724x_pci_controller *
+pci_bus_to_ar724x_controller(struct pci_bus *bus)
+{
+	struct pci_controller *hose;
+
+	hose = (struct pci_controller *) bus->sysdata;
+	return container_of(hose, struct ar724x_pci_controller, pci_controller);
+}
+
+static int ar724x_pci_local_write(struct ar724x_pci_controller *apc,
+				  int where, int size, u32 value)
+{
+	unsigned long flags;
+	void __iomem *base;
+	u32 data;
+	int s;
+
+	WARN_ON(where & (size - 1));
+
+	if (!apc->link_up)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	base = apc->crp_base;
+
+	spin_lock_irqsave(&apc->lock, flags);
+	data = __raw_readl(base + (where & ~3));
+
+	switch (size) {
+	case 1:
+		s = ((where & 3) * 8);
+		data &= ~(0xff << s);
+		data |= ((value & 0xff) << s);
+		break;
+	case 2:
+		s = ((where & 2) * 8);
+		data &= ~(0xffff << s);
+		data |= ((value & 0xffff) << s);
+		break;
+	case 4:
+		data = value;
+		break;
+	default:
+		spin_unlock_irqrestore(&apc->lock, flags);
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	}
+
+	__raw_writel(data, base + (where & ~3));
+	/* flush write */
+	__raw_readl(base + (where & ~3));
+	spin_unlock_irqrestore(&apc->lock, flags);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
 static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
 			    int size, uint32_t *value)
 {
+	struct ar724x_pci_controller *apc;
 	unsigned long flags;
 	void __iomem *base;
 	u32 data;
 
-	if (!ar724x_pci_link_up)
+	apc = pci_bus_to_ar724x_controller(bus);
+	if (!apc->link_up)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (devfn)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	base = ar724x_pci_devcfg_base;
+	base = apc->devcfg_base;
 
-	spin_lock_irqsave(&ar724x_pci_lock, flags);
+	spin_lock_irqsave(&apc->lock, flags);
 	data = __raw_readl(base + (where & ~3));
 
 	switch (size) {
@@ -85,17 +153,17 @@
 	case 4:
 		break;
 	default:
-		spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+		spin_unlock_irqrestore(&apc->lock, flags);
 
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 	}
 
-	spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+	spin_unlock_irqrestore(&apc->lock, flags);
 
 	if (where == PCI_BASE_ADDRESS_0 && size == 4 &&
-	    ar724x_pci_bar0_is_cached) {
+	    apc->bar0_is_cached) {
 		/* use the cached value */
-		*value = ar724x_pci_bar0_value;
+		*value = apc->bar0_value;
 	} else {
 		*value = data;
 	}
@@ -106,12 +174,14 @@
 static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
 			     int size, uint32_t value)
 {
+	struct ar724x_pci_controller *apc;
 	unsigned long flags;
 	void __iomem *base;
 	u32 data;
 	int s;
 
-	if (!ar724x_pci_link_up)
+	apc = pci_bus_to_ar724x_controller(bus);
+	if (!apc->link_up)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (devfn)
@@ -129,18 +199,18 @@
 			 * BAR0 register in order to make the device memory
 			 * accessible.
 			 */
-			ar724x_pci_bar0_is_cached = true;
-			ar724x_pci_bar0_value = value;
+			apc->bar0_is_cached = true;
+			apc->bar0_value = value;
 
 			value = AR7240_BAR0_WAR_VALUE;
 		} else {
-			ar724x_pci_bar0_is_cached = false;
+			apc->bar0_is_cached = false;
 		}
 	}
 
-	base = ar724x_pci_devcfg_base;
+	base = apc->devcfg_base;
 
-	spin_lock_irqsave(&ar724x_pci_lock, flags);
+	spin_lock_irqsave(&apc->lock, flags);
 	data = __raw_readl(base + (where & ~3));
 
 	switch (size) {
@@ -158,7 +228,7 @@
 		data = value;
 		break;
 	default:
-		spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+		spin_unlock_irqrestore(&apc->lock, flags);
 
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 	}
@@ -166,7 +236,7 @@
 	__raw_writel(data, base + (where & ~3));
 	/* flush write */
 	__raw_readl(base + (where & ~3));
-	spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+	spin_unlock_irqrestore(&apc->lock, flags);
 
 	return PCIBIOS_SUCCESSFUL;
 }
@@ -176,38 +246,20 @@
 	.write	= ar724x_pci_write,
 };
 
-static struct resource ar724x_io_resource = {
-	.name   = "PCI IO space",
-	.start  = 0,
-	.end    = 0,
-	.flags  = IORESOURCE_IO,
-};
-
-static struct resource ar724x_mem_resource = {
-	.name   = "PCI memory space",
-	.start  = AR724X_PCI_MEM_BASE,
-	.end    = AR724X_PCI_MEM_BASE + AR724X_PCI_MEM_SIZE - 1,
-	.flags  = IORESOURCE_MEM,
-};
-
-static struct pci_controller ar724x_pci_controller = {
-	.pci_ops        = &ar724x_pci_ops,
-	.io_resource    = &ar724x_io_resource,
-	.mem_resource	= &ar724x_mem_resource,
-};
-
 static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
+	struct ar724x_pci_controller *apc;
 	void __iomem *base;
 	u32 pending;
 
-	base = ar724x_pci_ctrl_base;
+	apc = irq_get_handler_data(irq);
+	base = apc->ctrl_base;
 
 	pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
 		  __raw_readl(base + AR724X_PCI_REG_INT_MASK);
 
 	if (pending & AR724X_PCI_INT_DEV0)
-		generic_handle_irq(ATH79_PCI_IRQ(0));
+		generic_handle_irq(apc->irq_base + 0);
 
 	else
 		spurious_interrupt();
@@ -215,13 +267,17 @@
 
 static void ar724x_pci_irq_unmask(struct irq_data *d)
 {
+	struct ar724x_pci_controller *apc;
 	void __iomem *base;
+	int offset;
 	u32 t;
 
-	base = ar724x_pci_ctrl_base;
+	apc = irq_data_get_irq_chip_data(d);
+	base = apc->ctrl_base;
+	offset = apc->irq_base - d->irq;
 
-	switch (d->irq) {
-	case ATH79_PCI_IRQ(0):
+	switch (offset) {
+	case 0:
 		t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
 		__raw_writel(t | AR724X_PCI_INT_DEV0,
 			     base + AR724X_PCI_REG_INT_MASK);
@@ -232,13 +288,17 @@
 
 static void ar724x_pci_irq_mask(struct irq_data *d)
 {
+	struct ar724x_pci_controller *apc;
 	void __iomem *base;
+	int offset;
 	u32 t;
 
-	base = ar724x_pci_ctrl_base;
+	apc = irq_data_get_irq_chip_data(d);
+	base = apc->ctrl_base;
+	offset = apc->irq_base - d->irq;
 
-	switch (d->irq) {
-	case ATH79_PCI_IRQ(0):
+	switch (offset) {
+	case 0:
 		t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
 		__raw_writel(t & ~AR724X_PCI_INT_DEV0,
 			     base + AR724X_PCI_REG_INT_MASK);
@@ -262,53 +322,123 @@
 	.irq_mask_ack	= ar724x_pci_irq_mask,
 };
 
-static void __init ar724x_pci_irq_init(int irq)
+static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc,
+				int id)
 {
 	void __iomem *base;
 	int i;
 
-	base = ar724x_pci_ctrl_base;
+	base = apc->ctrl_base;
 
 	__raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
 	__raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
 
-	BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT);
+	apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT);
 
-	for (i = ATH79_PCI_IRQ_BASE;
-	     i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++)
+	for (i = apc->irq_base;
+	     i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) {
 		irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
 					 handle_level_irq);
+		irq_set_chip_data(i, apc);
+	}
 
-	irq_set_chained_handler(irq, ar724x_pci_irq_handler);
+	irq_set_handler_data(apc->irq, apc);
+	irq_set_chained_handler(apc->irq, ar724x_pci_irq_handler);
 }
 
-int __init ar724x_pcibios_init(int irq)
+static int ar724x_pci_probe(struct platform_device *pdev)
 {
-	int ret;
+	struct ar724x_pci_controller *apc;
+	struct resource *res;
+	int id;
 
-	ret = -ENOMEM;
+	id = pdev->id;
+	if (id == -1)
+		id = 0;
 
-	ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE,
-					 AR724X_PCI_CFG_SIZE);
-	if (ar724x_pci_devcfg_base == NULL)
-		goto err;
+	apc = devm_kzalloc(&pdev->dev, sizeof(struct ar724x_pci_controller),
+			    GFP_KERNEL);
+	if (!apc)
+		return -ENOMEM;
 
-	ar724x_pci_ctrl_base = ioremap(AR724X_PCI_CTRL_BASE,
-				       AR724X_PCI_CTRL_SIZE);
-	if (ar724x_pci_ctrl_base == NULL)
-		goto err_unmap_devcfg;
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base");
+	if (!res)
+		return -EINVAL;
 
-	ar724x_pci_link_up = ar724x_pci_check_link();
-	if (!ar724x_pci_link_up)
-		pr_warn("ar724x: PCIe link is down\n");
+	apc->ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
+	if (apc->ctrl_base == NULL)
+		return -EBUSY;
 
-	ar724x_pci_irq_init(irq);
-	register_pci_controller(&ar724x_pci_controller);
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
+	if (!res)
+		return -EINVAL;
 
-	return PCIBIOS_SUCCESSFUL;
+	apc->devcfg_base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!apc->devcfg_base)
+		return -EBUSY;
 
-err_unmap_devcfg:
-	iounmap(ar724x_pci_devcfg_base);
-err:
-	return ret;
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crp_base");
+	if (!res)
+		return -EINVAL;
+
+	apc->crp_base = devm_request_and_ioremap(&pdev->dev, res);
+	if (apc->crp_base == NULL)
+		return -EBUSY;
+
+	apc->irq = platform_get_irq(pdev, 0);
+	if (apc->irq < 0)
+		return -EINVAL;
+
+	spin_lock_init(&apc->lock);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
+	if (!res)
+		return -EINVAL;
+
+	apc->io_res.parent = res;
+	apc->io_res.name = "PCI IO space";
+	apc->io_res.start = res->start;
+	apc->io_res.end = res->end;
+	apc->io_res.flags = IORESOURCE_IO;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
+	if (!res)
+		return -EINVAL;
+
+	apc->mem_res.parent = res;
+	apc->mem_res.name = "PCI memory space";
+	apc->mem_res.start = res->start;
+	apc->mem_res.end = res->end;
+	apc->mem_res.flags = IORESOURCE_MEM;
+
+	apc->pci_controller.pci_ops = &ar724x_pci_ops;
+	apc->pci_controller.io_resource = &apc->io_res;
+	apc->pci_controller.mem_resource = &apc->mem_res;
+
+	apc->link_up = ar724x_pci_check_link(apc);
+	if (!apc->link_up)
+		dev_warn(&pdev->dev, "PCIe link is down\n");
+
+	ar724x_pci_irq_init(apc, id);
+
+	ar724x_pci_local_write(apc, PCI_COMMAND, 4, AR724X_PCI_CMD_INIT);
+
+	register_pci_controller(&apc->pci_controller);
+
+	return 0;
 }
+
+static struct platform_driver ar724x_pci_driver = {
+	.probe = ar724x_pci_probe,
+	.driver = {
+		.name = "ar724x-pci",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init ar724x_pci_init(void)
+{
+	return platform_driver_register(&ar724x_pci_driver);
+}
+
+postcore_initcall(ar724x_pci_init);
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index 37b52dc..e2e69e1 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -54,8 +54,8 @@
 
 static void *cfg_space;
 
-#define PCI_BUS_ENABLED	1
-#define PCI_DEVICE_MODE	2
+#define PCI_BUS_ENABLED 1
+#define PCI_DEVICE_MODE 2
 
 static int bcm1480_bus_status;
 
@@ -194,7 +194,7 @@
 	.pci_ops	= &bcm1480_pci_ops,
 	.mem_resource	= &bcm1480_mem_resource,
 	.io_resource	= &bcm1480_io_resource,
-	.io_offset      = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
+	.io_offset	= A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
 };
 
 
@@ -227,7 +227,7 @@
 					     PCI_COMMAND));
 		if (!(cmdreg & PCI_COMMAND_MASTER)) {
 			printk
-			    ("PCI: Skipping PCI probe.  Bus is not initialized.\n");
+			    ("PCI: Skipping PCI probe.	Bus is not initialized.\n");
 			iounmap(cfg_space);
 			return 1; /* XXX */
 		}
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
index 50cc6e9..1263c5e 100644
--- a/arch/mips/pci/pci-bcm1480ht.c
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -53,8 +53,8 @@
 
 static void *ht_cfg_space;
 
-#define PCI_BUS_ENABLED	1
-#define PCI_DEVICE_MODE	2
+#define PCI_BUS_ENABLED 1
+#define PCI_DEVICE_MODE 2
 
 static int bcm1480ht_bus_status;
 
@@ -191,7 +191,7 @@
 	.io_resource	= &bcm1480ht_io_resource,
 	.index		= 1,
 	.get_busno	= bcm1480ht_pcibios_get_busno,
-	.io_offset      = A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
+	.io_offset	= A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
 };
 
 static int __init bcm1480ht_pcibios_init(void)
diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c
index c682468..76f16ea 100644
--- a/arch/mips/pci/pci-bcm47xx.c
+++ b/arch/mips/pci/pci-bcm47xx.c
@@ -91,7 +91,7 @@
 int pcibios_plat_dev_init(struct pci_dev *dev)
 {
 #ifdef CONFIG_BCM47XX_SSB
-	if (bcm47xx_bus_type ==  BCM47XX_BUS_TYPE_SSB)
+	if (bcm47xx_bus_type ==	 BCM47XX_BUS_TYPE_SSB)
 		return bcm47xx_pcibios_plat_dev_init_ssb(dev);
 	else
 #endif
diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c
index ca179b6..88e781c 100644
--- a/arch/mips/pci/pci-bcm63xx.c
+++ b/arch/mips/pci/pci-bcm63xx.c
@@ -25,21 +25,21 @@
 int bcm63xx_pci_enabled;
 
 static struct resource bcm_pci_mem_resource = {
-	.name   = "bcm63xx PCI memory space",
-	.start  = BCM_PCI_MEM_BASE_PA,
-	.end    = BCM_PCI_MEM_END_PA,
-	.flags  = IORESOURCE_MEM
+	.name	= "bcm63xx PCI memory space",
+	.start	= BCM_PCI_MEM_BASE_PA,
+	.end	= BCM_PCI_MEM_END_PA,
+	.flags	= IORESOURCE_MEM
 };
 
 static struct resource bcm_pci_io_resource = {
-	.name   = "bcm63xx PCI IO space",
-	.start  = BCM_PCI_IO_BASE_PA,
+	.name	= "bcm63xx PCI IO space",
+	.start	= BCM_PCI_IO_BASE_PA,
 #ifdef CONFIG_CARDBUS
-	.end    = BCM_PCI_IO_HALF_PA,
+	.end	= BCM_PCI_IO_HALF_PA,
 #else
-	.end    = BCM_PCI_IO_END_PA,
+	.end	= BCM_PCI_IO_END_PA,
 #endif
-	.flags  = IORESOURCE_IO
+	.flags	= IORESOURCE_IO
 };
 
 struct pci_controller bcm63xx_controller = {
@@ -55,17 +55,17 @@
  */
 #ifdef CONFIG_CARDBUS
 static struct resource bcm_cb_mem_resource = {
-	.name   = "bcm63xx Cardbus memory space",
-	.start  = BCM_CB_MEM_BASE_PA,
-	.end    = BCM_CB_MEM_END_PA,
-	.flags  = IORESOURCE_MEM
+	.name	= "bcm63xx Cardbus memory space",
+	.start	= BCM_CB_MEM_BASE_PA,
+	.end	= BCM_CB_MEM_END_PA,
+	.flags	= IORESOURCE_MEM
 };
 
 static struct resource bcm_cb_io_resource = {
-	.name   = "bcm63xx Cardbus IO space",
-	.start  = BCM_PCI_IO_HALF_PA + 1,
-	.end    = BCM_PCI_IO_END_PA,
-	.flags  = IORESOURCE_IO
+	.name	= "bcm63xx Cardbus IO space",
+	.start	= BCM_PCI_IO_HALF_PA + 1,
+	.end	= BCM_PCI_IO_END_PA,
+	.flags	= IORESOURCE_IO
 };
 
 struct pci_controller bcm63xx_cb_controller = {
@@ -76,17 +76,17 @@
 #endif
 
 static struct resource bcm_pcie_mem_resource = {
-	.name   = "bcm63xx PCIe memory space",
-	.start  = BCM_PCIE_MEM_BASE_PA,
-	.end    = BCM_PCIE_MEM_END_PA,
-	.flags  = IORESOURCE_MEM,
+	.name	= "bcm63xx PCIe memory space",
+	.start	= BCM_PCIE_MEM_BASE_PA,
+	.end	= BCM_PCIE_MEM_END_PA,
+	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource bcm_pcie_io_resource = {
-	.name   = "bcm63xx PCIe IO space",
-	.start  = 0,
-	.end    = 0,
-	.flags  = 0,
+	.name	= "bcm63xx PCIe IO space",
+	.start	= 0,
+	.end	= 0,
+	.flags	= 0,
 };
 
 struct pci_controller bcm63xx_pcie_controller = {
@@ -111,7 +111,7 @@
 	u32 tmp;
 
 	tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
-	tmp |=  MPI_PCICFGCTL_WRITEEN_MASK;
+	tmp |=	MPI_PCICFGCTL_WRITEEN_MASK;
 	bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
 	bcm_mpi_writel(val, MPI_PCICFGDATA_REG);
 }
@@ -211,7 +211,7 @@
 	 * first bytes to access it from CPU.
 	 *
 	 * this means that  no io access from CPU  should happen while
-	 * we do a configuration cycle,  but there's no way we can add
+	 * we do a configuration cycle,	 but there's no way we can add
 	 * a spinlock for each io access, so this is currently kind of
 	 * broken on SMP.
 	 */
@@ -244,9 +244,9 @@
 	bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
 #endif
 
-	/* setup local bus  to PCI access (IO memory),  we have only 1
-	 * IO window  for both PCI  and cardbus, but it  cannot handle
-	 * both  at the  same time,  assume standard  PCI for  now, if
+	/* setup local bus  to PCI access (IO memory),	we have only 1
+	 * IO window  for both PCI  and cardbus, but it	 cannot handle
+	 * both	 at the	 same time,  assume standard  PCI for  now, if
 	 * cardbus card has  IO zone, PCI fixup will  change window to
 	 * cardbus */
 	val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK;
@@ -284,7 +284,7 @@
 		bcm_mpi_writel(0, MPI_SP1_RANGE_REG);
 	}
 
-	/* change  host bridge  retry  counter to  infinite number  of
+	/* change  host bridge	retry  counter to  infinite number  of
 	 * retry,  needed for  some broadcom  wifi cards  with Silicon
 	 * Backplane bus where access to srom seems very slow  */
 	val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS);
diff --git a/arch/mips/pci/pci-bcm63xx.h b/arch/mips/pci/pci-bcm63xx.h
index e6736d5..ffab4da 100644
--- a/arch/mips/pci/pci-bcm63xx.h
+++ b/arch/mips/pci/pci-bcm63xx.h
@@ -7,7 +7,7 @@
 #include <bcm63xx_dev_pci.h>
 
 /*
- * Cardbus shares  the PCI bus, but has  no IDSEL, so a  special id is
+ * Cardbus shares  the PCI bus, but has	 no IDSEL, so a	 special id is
  * reserved for it.  If you have a standard PCI device at this id, you
  * need to change the following definition.
  */
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 7f4f49b..6eb65e4 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -30,7 +30,7 @@
 
 /*
  * XXX: No kmalloc available when we do our crosstalk scan,
- * 	we should try to move it later in the boot process.
+ *	we should try to move it later in the boot process.
  */
 static struct bridge_controller bridges[MAX_PCI_BUSSES];
 
@@ -103,7 +103,7 @@
 	 * swap pio's to pci mem and io space (big windows)
 	 */
 	bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |
-	                         BRIDGE_CTRL_MEM_SWAP;
+				 BRIDGE_CTRL_MEM_SWAP;
 #ifdef CONFIG_PAGE_SIZE_4KB
 	bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE;
 #else /* 16kB or larger */
@@ -123,7 +123,7 @@
 		bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR;
 		bc->pci_int[slot] = -1;
 	}
-	bridge->b_wid_tflush;     /* wait until Bridge PIO complete */
+	bridge->b_wid_tflush;	  /* wait until Bridge PIO complete */
 
 	bc->base = bridge;
 
@@ -184,7 +184,7 @@
 }
 
 /*
- * Device might live on a subordinate PCI bus.  XXX Walk up the chain of buses
+ * Device might live on a subordinate PCI bus.	XXX Walk up the chain of buses
  * to find the slot number in sense of the bridge device register.
  * XXX This also means multiple devices might rely on conflicting bridge
  * settings.
diff --git a/arch/mips/pci/pci-ip32.c b/arch/mips/pci/pci-ip32.c
index 532b561..b1e061f 100644
--- a/arch/mips/pci/pci-ip32.c
+++ b/arch/mips/pci/pci-ip32.c
@@ -18,9 +18,9 @@
 
 /*
  * Handle errors from the bridge.  This includes master and target aborts,
- * various command and address errors, and the interrupt test.  This gets
- * registered on the bridge error irq.  It's conceivable that some of these
- * conditions warrant a panic.  Anybody care to say which ones?
+ * various command and address errors, and the interrupt test.	This gets
+ * registered on the bridge error irq.	It's conceivable that some of these
+ * conditions warrant a panic.	Anybody care to say which ones?
  */
 static irqreturn_t macepci_error(int irq, void *dev)
 {
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 910fb4c..879077b 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -129,8 +129,16 @@
 
 	/* setup reset gpio used by pci */
 	reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
-	if (gpio_is_valid(reset_gpio))
-		devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
+	if (gpio_is_valid(reset_gpio)) {
+		int ret = devm_gpio_request(&pdev->dev,
+						reset_gpio, "pci-reset");
+		if (ret) {
+			dev_err(&pdev->dev,
+				"failed to request gpio %d\n", reset_gpio);
+			return ret;
+		}
+		gpio_direction_output(reset_gpio, 1);
+	}
 
 	/* enable auto-switching between PCI and EBU */
 	ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
index a98e543..40d2797 100644
--- a/arch/mips/pci/pci-lasat.c
+++ b/arch/mips/pci/pci-lasat.c
@@ -51,15 +51,15 @@
 
 arch_initcall(lasat_pci_setup);
 
-#define LASAT_IRQ_ETH1   (LASAT_IRQ_BASE + 0)
-#define LASAT_IRQ_ETH0   (LASAT_IRQ_BASE + 1)
-#define LASAT_IRQ_HDC    (LASAT_IRQ_BASE + 2)
-#define LASAT_IRQ_COMP   (LASAT_IRQ_BASE + 3)
-#define LASAT_IRQ_HDLC   (LASAT_IRQ_BASE + 4)
-#define LASAT_IRQ_PCIA   (LASAT_IRQ_BASE + 5)
-#define LASAT_IRQ_PCIB   (LASAT_IRQ_BASE + 6)
-#define LASAT_IRQ_PCIC   (LASAT_IRQ_BASE + 7)
-#define LASAT_IRQ_PCID   (LASAT_IRQ_BASE + 8)
+#define LASAT_IRQ_ETH1	 (LASAT_IRQ_BASE + 0)
+#define LASAT_IRQ_ETH0	 (LASAT_IRQ_BASE + 1)
+#define LASAT_IRQ_HDC	 (LASAT_IRQ_BASE + 2)
+#define LASAT_IRQ_COMP	 (LASAT_IRQ_BASE + 3)
+#define LASAT_IRQ_HDLC	 (LASAT_IRQ_BASE + 4)
+#define LASAT_IRQ_PCIA	 (LASAT_IRQ_BASE + 5)
+#define LASAT_IRQ_PCIB	 (LASAT_IRQ_BASE + 6)
+#define LASAT_IRQ_PCIC	 (LASAT_IRQ_BASE + 7)
+#define LASAT_IRQ_PCID	 (LASAT_IRQ_BASE + 8)
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
@@ -69,13 +69,13 @@
 	case 3:
 		return LASAT_IRQ_PCIA + (((slot-1) + (pin-1)) % 4);
 	case 4:
-		return LASAT_IRQ_ETH1;   /* Ethernet 1 (LAN 2) */
+		return LASAT_IRQ_ETH1;	 /* Ethernet 1 (LAN 2) */
 	case 5:
-		return LASAT_IRQ_ETH0;   /* Ethernet 0 (LAN 1) */
+		return LASAT_IRQ_ETH0;	 /* Ethernet 0 (LAN 1) */
 	case 6:
-		return LASAT_IRQ_HDC;    /* IDE controller */
+		return LASAT_IRQ_HDC;	 /* IDE controller */
 	default:
-		return 0xff;            /* Illegal */
+		return 0xff;		/* Illegal */
 	}
 
 	return -1;
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index 5b5ed76..95c2ea8 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -30,8 +30,8 @@
  * addresses. Use PCI endian swapping 1 so no address swapping is
  * necessary. The Linux io routines will endian swap the data.
  */
-#define OCTEON_PCI_IOSPACE_BASE     0x80011a0400000000ull
-#define OCTEON_PCI_IOSPACE_SIZE     (1ull<<32)
+#define OCTEON_PCI_IOSPACE_BASE	    0x80011a0400000000ull
+#define OCTEON_PCI_IOSPACE_SIZE	    (1ull<<32)
 
 /* Octeon't PCI controller uses did=3, subdid=3 for PCI memory. */
 #define OCTEON_PCI_MEMSPACE_OFFSET  (0x00011b0000000000ull)
@@ -68,10 +68,10 @@
  *
  * @dev:    The Linux PCI device structure for the device to map
  * @slot:   The slot number for this device on __BUS 0__. Linux
- *               enumerates through all the bridges and figures out the
- *               slot on Bus 0 where this device eventually hooks to.
+ *		 enumerates through all the bridges and figures out the
+ *		 slot on Bus 0 where this device eventually hooks to.
  * @pin:    The PCI interrupt pin read from the device, then swizzled
- *               as it goes through each bridge.
+ *		 as it goes through each bridge.
  * Returns Interrupt number for the device
  */
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
@@ -120,8 +120,8 @@
 	/* Enable the PCIe normal error reporting */
 	config = PCI_EXP_DEVCTL_CERE; /* Correctable Error Reporting */
 	config |= PCI_EXP_DEVCTL_NFERE; /* Non-Fatal Error Reporting */
-	config |= PCI_EXP_DEVCTL_FERE;  /* Fatal Error Reporting */
-	config |= PCI_EXP_DEVCTL_URRE;  /* Unsupported Request */
+	config |= PCI_EXP_DEVCTL_FERE;	/* Fatal Error Reporting */
+	config |= PCI_EXP_DEVCTL_URRE;	/* Unsupported Request */
 	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, config);
 
 	/* Find the Advanced Error Reporting capability */
@@ -226,10 +226,10 @@
  *
  * @dev:    The Linux PCI device structure for the device to map
  * @slot:   The slot number for this device on __BUS 0__. Linux
- *               enumerates through all the bridges and figures out the
- *               slot on Bus 0 where this device eventually hooks to.
+ *		 enumerates through all the bridges and figures out the
+ *		 slot on Bus 0 where this device eventually hooks to.
  * @pin:    The PCI interrupt pin read from the device, then swizzled
- *               as it goes through each bridge.
+ *		 as it goes through each bridge.
  * Returns Interrupt number for the device
  */
 int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev,
@@ -404,8 +404,8 @@
 		ctl_status_2.s.bb1_siz = 1;  /* BAR1 is 2GB */
 		ctl_status_2.s.bb_ca = 1;    /* Don't use L2 with big bars */
 		ctl_status_2.s.bb_es = 1;    /* Big bar in byte swap mode */
-		ctl_status_2.s.bb1 = 1;      /* BAR1 is big */
-		ctl_status_2.s.bb0 = 1;      /* BAR0 is big */
+		ctl_status_2.s.bb1 = 1;	     /* BAR1 is big */
+		ctl_status_2.s.bb0 = 1;	     /* BAR0 is big */
 	}
 
 	octeon_npi_write32(CVMX_NPI_PCI_CTL_STATUS_2, ctl_status_2.u32);
@@ -446,7 +446,7 @@
 		 * count. [1..31] and 0=32.  NOTE: If the user
 		 * programs these bits beyond the Designed Maximum
 		 * outstanding count, then the designed maximum table
-		 * depth will be used instead.  No additional
+		 * depth will be used instead.	No additional
 		 * Deferred/Split transactions will be accepted if
 		 * this outstanding maximum count is
 		 * reached. Furthermore, no additional deferred/split
@@ -456,7 +456,7 @@
 		cfg19.s.tdomc = 4;
 		/*
 		 * Master Deferred Read Request Outstanding Max Count
-		 * (PCI only).  CR4C[26:24] Max SAC cycles MAX DAC
+		 * (PCI only).	CR4C[26:24] Max SAC cycles MAX DAC
 		 * cycles 000 8 4 001 1 0 010 2 1 011 3 1 100 4 2 101
 		 * 5 2 110 6 3 111 7 3 For example, if these bits are
 		 * programmed to 100, the core can support 2 DAC
@@ -550,7 +550,7 @@
 
 	/*
 	 * Affects PCI performance when OCTEON services reads to its
-	 * BAR1/BAR2. Refer to Section 10.6.1.  The recommended values are
+	 * BAR1/BAR2. Refer to Section 10.6.1.	The recommended values are
 	 * 0x22, 0x33, and 0x33 for PCI_READ_CMD_6, PCI_READ_CMD_C, and
 	 * PCI_READ_CMD_E, respectively. Unfortunately due to errata DDR-700,
 	 * these values need to be changed so they won't possibly prefetch off
diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
index 5f3a69c..b128cb9 100644
--- a/arch/mips/pci/pci-rc32434.c
+++ b/arch/mips/pci/pci-rc32434.c
@@ -33,7 +33,7 @@
 #include <asm/mach-rc32434/rc32434.h>
 #include <asm/mach-rc32434/pci.h>
 
-#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_READ	 0
 #define PCI_ACCESS_WRITE 1
 
 /* define an unsigned array for the PCI registers */
@@ -82,11 +82,11 @@
 #define PCI_MEM2_START	(PCI_ADDR_START + CPUTOPCI_MEM_WIN)
 #define PCI_MEM2_END	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN)  - 1)
 #define PCI_IO1_START	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN))
-#define PCI_IO1_END 							\
+#define PCI_IO1_END							\
 	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN - 1)
 #define PCI_IO2_START							\
 	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN)
-#define PCI_IO2_END 							\
+#define PCI_IO2_END							\
 	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + (2 * CPUTOPCI_IO_WIN) - 1)
 
 struct pci_controller rc32434_controller2;
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index dd97f3a..cdefcc4 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -55,9 +55,9 @@
 
 static void *cfg_space;
 
-#define PCI_BUS_ENABLED	1
-#define LDT_BUS_ENABLED	2
-#define PCI_DEVICE_MODE	4
+#define PCI_BUS_ENABLED 1
+#define LDT_BUS_ENABLED 2
+#define PCI_DEVICE_MODE 4
 
 static int sb1250_bus_status;
 
@@ -239,7 +239,7 @@
 			       PCI_COMMAND));
 		if (!(cmdreg & PCI_COMMAND_MASTER)) {
 			printk
-			    ("PCI: Skipping PCI probe.  Bus is not initialized.\n");
+			    ("PCI: Skipping PCI probe.	Bus is not initialized.\n");
 			iounmap(cfg_space);
 			return 0;
 		}
diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c
index 444b8d8..157c771 100644
--- a/arch/mips/pci/pci-vr41xx.c
+++ b/arch/mips/pci/pci-vr41xx.c
@@ -69,17 +69,17 @@
 };
 
 static struct resource pci_mem_resource = {
-	.name   = "PCI Memory resources",
-	.start  = PCI_MEM_RESOURCE_START,
-	.end    = PCI_MEM_RESOURCE_END,
-	.flags  = IORESOURCE_MEM,
+	.name	= "PCI Memory resources",
+	.start	= PCI_MEM_RESOURCE_START,
+	.end	= PCI_MEM_RESOURCE_END,
+	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource pci_io_resource = {
-	.name   = "PCI I/O resources",
-	.start  = PCI_IO_RESOURCE_START,
-	.end    = PCI_IO_RESOURCE_END,
-	.flags  = IORESOURCE_IO,
+	.name	= "PCI I/O resources",
+	.start	= PCI_IO_RESOURCE_START,
+	.end	= PCI_IO_RESOURCE_END,
+	.flags	= IORESOURCE_IO,
 };
 
 static struct pci_controller_unit_setup vr41xx_pci_controller_unit_setup = {
@@ -97,7 +97,7 @@
 };
 
 static struct pci_controller vr41xx_pci_controller = {
-	.pci_ops        = &vr41xx_pci_ops,
+	.pci_ops	= &vr41xx_pci_ops,
 	.mem_resource	= &pci_mem_resource,
 	.io_resource	= &pci_io_resource,
 };
@@ -148,7 +148,7 @@
 	else if ((vtclock / 2) < pci_clock_max)
 		pciu_write(PCICLKSELREG, HALF_VTCLOCK);
 	else if (current_cpu_data.processor_id >= PRID_VR4131_REV2_1 &&
-	         (vtclock / 3) < pci_clock_max)
+		 (vtclock / 3) < pci_clock_max)
 		pciu_write(PCICLKSELREG, ONE_THIRD_VTCLOCK);
 	else if ((vtclock / 4) < pci_clock_max)
 		pciu_write(PCICLKSELREG, QUARTER_VTCLOCK);
@@ -281,7 +281,7 @@
 	pciu_write(PCIAPCNTREG, val);
 
 	pciu_write(COMMANDREG, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-	                       PCI_COMMAND_MASTER | PCI_COMMAND_PARITY |
+			       PCI_COMMAND_MASTER | PCI_COMMAND_PARITY |
 			       PCI_COMMAND_SERR);
 
 	/* Clear bus error */
diff --git a/arch/mips/pci/pci-vr41xx.h b/arch/mips/pci/pci-vr41xx.h
index 6b1ae2e..e6b4a1b 100644
--- a/arch/mips/pci/pci-vr41xx.h
+++ b/arch/mips/pci/pci-vr41xx.h
@@ -1,7 +1,7 @@
 /*
  *  pci-vr41xx.h, Include file for PCI Control Unit of the NEC VR4100 series.
  *
- *  Copyright (C) 2002  MontaVista Software Inc.
+ *  Copyright (C) 2002	MontaVista Software Inc.
  *    Author: Yoichi Yuasa <source@mvista.com>
  *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
diff --git a/arch/mips/pci/pci-xlp.c b/arch/mips/pci/pci-xlp.c
index 140557a..653d2db 100644
--- a/arch/mips/pci/pci-xlp.c
+++ b/arch/mips/pci/pci-xlp.c
@@ -46,6 +46,7 @@
 
 #include <asm/netlogic/interrupt.h>
 #include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
 
 #include <asm/netlogic/xlp-hal/iomap.h>
 #include <asm/netlogic/xlp-hal/pic.h>
@@ -55,7 +56,7 @@
 
 static void *pci_config_base;
 
-#define	pci_cfg_addr(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off))
+#define pci_cfg_addr(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off))
 
 /* PCI ops */
 static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn,
@@ -64,8 +65,12 @@
 	u32 data;
 	u32 *cfgaddr;
 
+	where &= ~3;
+	if (bus->number == 0 && PCI_SLOT(devfn) == 1 && where == 0x954)
+		return 0xffffffff;
+
 	cfgaddr = (u32 *)(pci_config_base +
-			pci_cfg_addr(bus->number, devfn, where & ~3));
+			pci_cfg_addr(bus->number, devfn, where));
 	data = *cfgaddr;
 	return data;
 }
@@ -135,54 +140,60 @@
 };
 
 static struct resource nlm_pci_mem_resource = {
-	.name           = "XLP PCI MEM",
-	.start          = 0xd0000000UL,	/* 256MB PCI mem @ 0xd000_0000 */
-	.end            = 0xdfffffffUL,
-	.flags          = IORESOURCE_MEM,
+	.name		= "XLP PCI MEM",
+	.start		= 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */
+	.end		= 0xdfffffffUL,
+	.flags		= IORESOURCE_MEM,
 };
 
 static struct resource nlm_pci_io_resource = {
-	.name           = "XLP IO MEM",
-	.start          = 0x14000000UL,	/* 64MB PCI IO @ 0x1000_0000 */
-	.end            = 0x17ffffffUL,
-	.flags          = IORESOURCE_IO,
+	.name		= "XLP IO MEM",
+	.start		= 0x14000000UL, /* 64MB PCI IO @ 0x1000_0000 */
+	.end		= 0x17ffffffUL,
+	.flags		= IORESOURCE_IO,
 };
 
 struct pci_controller nlm_pci_controller = {
-	.index          = 0,
-	.pci_ops        = &nlm_pci_ops,
-	.mem_resource   = &nlm_pci_mem_resource,
-	.mem_offset     = 0x00000000UL,
-	.io_resource    = &nlm_pci_io_resource,
-	.io_offset      = 0x00000000UL,
+	.index		= 0,
+	.pci_ops	= &nlm_pci_ops,
+	.mem_resource	= &nlm_pci_mem_resource,
+	.mem_offset	= 0x00000000UL,
+	.io_resource	= &nlm_pci_io_resource,
+	.io_offset	= 0x00000000UL,
 };
 
-static int get_irq_vector(const struct pci_dev *dev)
+static struct pci_dev *xlp_get_pcie_link(const struct pci_dev *dev)
 {
-	/*
-	 * For XLP PCIe, there is an IRQ per Link, find out which
-	 * link the device is on to assign interrupts
-	*/
-	if (dev->bus->self == NULL)
-		return 0;
+	struct pci_bus *bus, *p;
 
-	switch	(dev->bus->self->devfn) {
-	case 0x8:
-		return PIC_PCIE_LINK_0_IRQ;
-	case 0x9:
-		return PIC_PCIE_LINK_1_IRQ;
-	case 0xa:
-		return PIC_PCIE_LINK_2_IRQ;
-	case 0xb:
-		return PIC_PCIE_LINK_3_IRQ;
-	}
-	WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn);
-	return 0;
+	/* Find the bridge on bus 0 */
+	bus = dev->bus;
+	for (p = bus->parent; p && p->number != 0; p = p->parent)
+		bus = p;
+
+	return p ? bus->self : NULL;
+}
+
+static inline int nlm_pci_link_to_irq(int link)
+{
+	return PIC_PCIE_LINK_0_IRQ + link;
 }
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	return get_irq_vector(dev);
+	struct pci_dev *lnkdev;
+	int lnkslot, lnkfunc;
+
+	/*
+	 * For XLP PCIe, there is an IRQ per Link, find out which
+	 * link the device is on to assign interrupts
+	*/
+	lnkdev = xlp_get_pcie_link(dev);
+	if (lnkdev == NULL)
+		return 0;
+	lnkfunc = PCI_FUNC(lnkdev->devfn);
+	lnkslot = PCI_SLOT(lnkdev->devfn);
+	return nlm_irq_to_xirq(lnkslot / 8, nlm_pci_link_to_irq(lnkfunc));
 }
 
 /* Do platform specific device initialization at pci_enable_device() time */
@@ -191,51 +202,76 @@
 	return 0;
 }
 
-static int xlp_enable_pci_bswap(void)
+/*
+ * If big-endian, enable hardware byteswap on the PCIe bridges.
+ * This will make both the SoC and PCIe devices behave consistently with
+ * readl/writel.
+ */
+#ifdef __BIG_ENDIAN
+static void xlp_config_pci_bswap(int node, int link)
 {
-	uint64_t pciebase, sysbase;
-	int node, i;
+	uint64_t nbubase, lnkbase;
 	u32 reg;
 
-	/* Chip-0 so node set to 0 */
-	node = 0;
-	sysbase = nlm_get_bridge_regbase(node);
+	nbubase = nlm_get_bridge_regbase(node);
+	lnkbase = nlm_get_pcie_base(node, link);
+
 	/*
 	 *  Enable byte swap in hardware. Program each link's PCIe SWAP regions
 	 * from the link's address ranges.
 	 */
-	for (i = 0; i < 4; i++) {
-		pciebase = nlm_pcicfg_base(XLP_IO_PCIE_OFFSET(node, i));
-		if (nlm_read_pci_reg(pciebase, 0) == 0xffffffff)
-			continue;
+	reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEMEM_BASE0 + link);
+	nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_MEM_BASE, reg);
 
-		reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEMEM_BASE0 + i);
-		nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_MEM_BASE, reg);
+	reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEMEM_LIMIT0 + link);
+	nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_MEM_LIM, reg | 0xfff);
 
-		reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEMEM_LIMIT0 + i);
-		nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_MEM_LIM,
-			reg | 0xfff);
+	reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEIO_BASE0 + link);
+	nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_IO_BASE, reg);
 
-		reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEIO_BASE0 + i);
-		nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_IO_BASE, reg);
-
-		reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEIO_LIMIT0 + i);
-		nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_IO_LIM, reg | 0xfff);
-	}
-	return 0;
+	reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEIO_LIMIT0 + link);
+	nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_IO_LIM, reg | 0xfff);
 }
+#else
+/* Swap configuration not needed in little-endian mode */
+static inline void xlp_config_pci_bswap(int node, int link) {}
+#endif /* __BIG_ENDIAN */
 
 static int __init pcibios_init(void)
 {
+	struct nlm_soc_info *nodep;
+	uint64_t pciebase;
+	int link, n;
+	u32 reg;
+
 	/* Firmware assigns PCI resources */
 	pci_set_flags(PCI_PROBE_ONLY);
 	pci_config_base = ioremap(XLP_DEFAULT_PCI_ECFG_BASE, 64 << 20);
 
 	/* Extend IO port for memory mapped io */
-	ioport_resource.start =  0;
+	ioport_resource.start =	 0;
 	ioport_resource.end   = ~0;
 
-	xlp_enable_pci_bswap();
+	for (n = 0; n < NLM_NR_NODES; n++) {
+		nodep = nlm_get_node(n);
+		if (!nodep->coremask)
+			continue;	/* node does not exist */
+
+		for (link = 0; link < 4; link++) {
+			pciebase = nlm_get_pcie_base(n, link);
+			if (nlm_read_pci_reg(pciebase, 0) == 0xffffffff)
+				continue;
+			xlp_config_pci_bswap(n, link);
+
+			/* put in intpin and irq - u-boot does not */
+			reg = nlm_read_pci_reg(pciebase, 0xf);
+			reg &= ~0x1fu;
+			reg |= (1 << 8) | nlm_pci_link_to_irq(link);
+			nlm_write_pci_reg(pciebase, 0xf, reg);
+			pr_info("XLP PCIe: Link %d-%d initialized.\n", n, link);
+		}
+	}
+
 	set_io_port_base(CKSEG1);
 	nlm_pci_controller.io_map_base = CKSEG1;
 
diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
index 0c18ccc..4427abb 100644
--- a/arch/mips/pci/pci-xlr.c
+++ b/arch/mips/pci/pci-xlr.c
@@ -56,7 +56,7 @@
 
 static void *pci_config_base;
 
-#define	pci_cfg_addr(bus, devfn, off) (((bus) << 16) | ((devfn) << 8) | (off))
+#define pci_cfg_addr(bus, devfn, off) (((bus) << 16) | ((devfn) << 8) | (off))
 
 /* PCI ops */
 static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn,
@@ -136,26 +136,26 @@
 };
 
 static struct resource nlm_pci_mem_resource = {
-	.name           = "XLR PCI MEM",
-	.start          = 0xd0000000UL,	/* 256MB PCI mem @ 0xd000_0000 */
-	.end            = 0xdfffffffUL,
-	.flags          = IORESOURCE_MEM,
+	.name		= "XLR PCI MEM",
+	.start		= 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */
+	.end		= 0xdfffffffUL,
+	.flags		= IORESOURCE_MEM,
 };
 
 static struct resource nlm_pci_io_resource = {
-	.name           = "XLR IO MEM",
-	.start          = 0x10000000UL,	/* 16MB PCI IO @ 0x1000_0000 */
-	.end            = 0x100fffffUL,
-	.flags          = IORESOURCE_IO,
+	.name		= "XLR IO MEM",
+	.start		= 0x10000000UL, /* 16MB PCI IO @ 0x1000_0000 */
+	.end		= 0x100fffffUL,
+	.flags		= IORESOURCE_IO,
 };
 
 struct pci_controller nlm_pci_controller = {
-	.index          = 0,
-	.pci_ops        = &nlm_pci_ops,
-	.mem_resource   = &nlm_pci_mem_resource,
-	.mem_offset     = 0x00000000UL,
-	.io_resource    = &nlm_pci_io_resource,
-	.io_offset      = 0x00000000UL,
+	.index		= 0,
+	.pci_ops	= &nlm_pci_ops,
+	.mem_resource	= &nlm_pci_mem_resource,
+	.mem_offset	= 0x00000000UL,
+	.io_resource	= &nlm_pci_io_resource,
+	.io_offset	= 0x00000000UL,
 };
 
 /*
@@ -259,7 +259,7 @@
 		MSI_ADDR_REDIRECTION_CPU;
 
 	msg.data = MSI_DATA_TRIGGER_EDGE |
-		MSI_DATA_LEVEL_ASSERT    |
+		MSI_DATA_LEVEL_ASSERT	 |
 		MSI_DATA_DELIVERY_FIXED;
 
 	ret = irq_set_msi_desc(irq, desc);
@@ -344,7 +344,7 @@
 	pci_config_base = ioremap(DEFAULT_PCI_CONFIG_BASE, 16 << 20);
 
 	/* Extend IO port for memory mapped io */
-	ioport_resource.start =  0;
+	ioport_resource.start =	 0;
 	ioport_resource.end   = ~0;
 
 	set_io_port_base(CKSEG1);
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index a184344..0872f12 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -1,6 +1,6 @@
 /*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  *
@@ -175,9 +175,20 @@
 
 void register_pci_controller(struct pci_controller *hose)
 {
-	if (request_resource(&iomem_resource, hose->mem_resource) < 0)
+	struct resource *parent;
+
+	parent = hose->mem_resource->parent;
+	if (!parent)
+		parent = &iomem_resource;
+
+	if (request_resource(parent, hose->mem_resource) < 0)
 		goto out;
-	if (request_resource(&ioport_resource, hose->io_resource) < 0) {
+
+	parent = hose->io_resource->parent;
+	if (!parent)
+		parent = &ioport_resource;
+
+	if (request_resource(parent, hose->io_resource) < 0) {
 		release_resource(hose->mem_resource);
 		goto out;
 	}
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index fdb4d55..5e36c33 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -43,7 +43,7 @@
 		uint64_t upper:2;	/* Normally 2 for XKPHYS */
 		uint64_t reserved_49_61:13;	/* Must be zero */
 		uint64_t io:1;	/* 1 for IO space access */
-		uint64_t did:5;	/* PCIe DID = 3 */
+		uint64_t did:5; /* PCIe DID = 3 */
 		uint64_t subdid:3;	/* PCIe SubDID = 1 */
 		uint64_t reserved_36_39:4;	/* Must be zero */
 		uint64_t es:2;	/* Endian swap = 1 */
@@ -74,7 +74,7 @@
 		uint64_t upper:2;	/* Normally 2 for XKPHYS */
 		uint64_t reserved_49_61:13;	/* Must be zero */
 		uint64_t io:1;	/* 1 for IO space access */
-		uint64_t did:5;	/* PCIe DID = 3 */
+		uint64_t did:5; /* PCIe DID = 3 */
 		uint64_t subdid:3;	/* PCIe SubDID = 2 */
 		uint64_t reserved_36_39:4;	/* Must be zero */
 		uint64_t es:2;	/* Endian swap = 1 */
@@ -85,7 +85,7 @@
 		uint64_t upper:2;	/* Normally 2 for XKPHYS */
 		uint64_t reserved_49_61:13;	/* Must be zero */
 		uint64_t io:1;	/* 1 for IO space access */
-		uint64_t did:5;	/* PCIe DID = 3 */
+		uint64_t did:5; /* PCIe DID = 3 */
 		uint64_t subdid:3;	/* PCIe SubDID = 3-6 */
 		uint64_t reserved_36_39:4;	/* Must be zero */
 		uint64_t address:36;	/* PCIe Mem address */
@@ -166,7 +166,7 @@
  * Read a PCIe config space register indirectly. This is used for
  * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???.
  *
- * @pcie_port:  PCIe port to read from
+ * @pcie_port:	PCIe port to read from
  * @cfg_offset: Address to read
  *
  * Returns Value read
@@ -194,9 +194,9 @@
  * Write a PCIe config space register indirectly. This is used for
  * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???.
  *
- * @pcie_port:  PCIe port to write to
+ * @pcie_port:	PCIe port to write to
  * @cfg_offset: Address to write
- * @val:        Value to write
+ * @val:	Value to write
  */
 static void cvmx_pcie_cfgx_write(int pcie_port, uint32_t cfg_offset,
 				 uint32_t val)
@@ -222,7 +222,7 @@
  * @pcie_port: PCIe port to access
  * @bus:       Sub bus
  * @dev:       Device ID
- * @fn:        Device sub function
+ * @fn:	       Device sub function
  * @reg:       Register to access
  *
  * Returns 64bit Octeon IO address
@@ -259,7 +259,7 @@
  * @pcie_port: PCIe port the device is on
  * @bus:       Sub bus
  * @dev:       Device ID
- * @fn:        Device sub function
+ * @fn:	       Device sub function
  * @reg:       Register to access
  *
  * Returns Result of the read
@@ -281,7 +281,7 @@
  * @pcie_port: PCIe port the device is on
  * @bus:       Sub bus
  * @dev:       Device ID
- * @fn:        Device sub function
+ * @fn:	       Device sub function
  * @reg:       Register to access
  *
  * Returns Result of the read
@@ -303,7 +303,7 @@
  * @pcie_port: PCIe port the device is on
  * @bus:       Sub bus
  * @dev:       Device ID
- * @fn:        Device sub function
+ * @fn:	       Device sub function
  * @reg:       Register to access
  *
  * Returns Result of the read
@@ -325,7 +325,7 @@
  * @pcie_port: PCIe port the device is on
  * @bus:       Sub bus
  * @dev:       Device ID
- * @fn:        Device sub function
+ * @fn:	       Device sub function
  * @reg:       Register to access
  * @val:       Value to write
  */
@@ -344,7 +344,7 @@
  * @pcie_port: PCIe port the device is on
  * @bus:       Sub bus
  * @dev:       Device ID
- * @fn:        Device sub function
+ * @fn:	       Device sub function
  * @reg:       Register to access
  * @val:       Value to write
  */
@@ -363,7 +363,7 @@
  * @pcie_port: PCIe port the device is on
  * @bus:       Sub bus
  * @dev:       Device ID
- * @fn:        Device sub function
+ * @fn:	       Device sub function
  * @reg:       Register to access
  * @val:       Value to write
  */
@@ -883,14 +883,14 @@
 
 	/* Store merge control (NPEI_MEM_ACCESS_CTL[TIMER,MAX_WORD]) */
 	npei_mem_access_ctl.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL);
-	npei_mem_access_ctl.s.max_word = 0;     /* Allow 16 words to combine */
-	npei_mem_access_ctl.s.timer = 127;      /* Wait up to 127 cycles for more data */
+	npei_mem_access_ctl.s.max_word = 0;	/* Allow 16 words to combine */
+	npei_mem_access_ctl.s.timer = 127;	/* Wait up to 127 cycles for more data */
 	cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL, npei_mem_access_ctl.u64);
 
 	/* Setup Mem access SubDIDs */
 	mem_access_subid.u64 = 0;
 	mem_access_subid.s.port = pcie_port; /* Port the request is sent to. */
-	mem_access_subid.s.nmerge = 1;  /* Due to an errata on pass 1 chips, no merging is allowed. */
+	mem_access_subid.s.nmerge = 1;	/* Due to an errata on pass 1 chips, no merging is allowed. */
 	mem_access_subid.s.esr = 1;	/* Endian-swap for Reads. */
 	mem_access_subid.s.esw = 1;	/* Endian-swap for Writes. */
 	mem_access_subid.s.nsr = 0;	/* Enable Snooping for Reads. Octeon doesn't care, but devices might want this more conservative setting */
@@ -926,7 +926,7 @@
 
 	bar1_index.u32 = 0;
 	bar1_index.s.addr_idx = (CVMX_PCIE_BAR1_PHYS_BASE >> 22);
-	bar1_index.s.ca = 1;       /* Not Cached */
+	bar1_index.s.ca = 1;	   /* Not Cached */
 	bar1_index.s.end_swp = 1;  /* Endian Swap mode */
 	bar1_index.s.addr_v = 1;   /* Valid entry */
 
@@ -1342,11 +1342,11 @@
 	/* Setup Mem access SubDIDs */
 	mem_access_subid.u64 = 0;
 	mem_access_subid.s.port = pcie_port; /* Port the request is sent to. */
-	mem_access_subid.s.nmerge = 0;  /* Allow merging as it works on CN6XXX. */
-	mem_access_subid.s.esr = 1;     /* Endian-swap for Reads. */
-	mem_access_subid.s.esw = 1;     /* Endian-swap for Writes. */
-	mem_access_subid.s.wtype = 0;   /* "No snoop" and "Relaxed ordering" are not set */
-	mem_access_subid.s.rtype = 0;   /* "No snoop" and "Relaxed ordering" are not set */
+	mem_access_subid.s.nmerge = 0;	/* Allow merging as it works on CN6XXX. */
+	mem_access_subid.s.esr = 1;	/* Endian-swap for Reads. */
+	mem_access_subid.s.esw = 1;	/* Endian-swap for Writes. */
+	mem_access_subid.s.wtype = 0;	/* "No snoop" and "Relaxed ordering" are not set */
+	mem_access_subid.s.rtype = 0;	/* "No snoop" and "Relaxed ordering" are not set */
 	/* PCIe Adddress Bits <63:34>. */
 	if (OCTEON_IS_MODEL(OCTEON_CN68XX))
 		mem_access_subid.cn68xx.ba = 0;
@@ -1409,7 +1409,7 @@
 
 	bar1_index.u64 = 0;
 	bar1_index.s.addr_idx = (CVMX_PCIE_BAR1_PHYS_BASE >> 22);
-	bar1_index.s.ca = 1;       /* Not Cached */
+	bar1_index.s.ca = 1;	   /* Not Cached */
 	bar1_index.s.end_swp = 1;  /* Endian Swap mode */
 	bar1_index.s.addr_v = 1;   /* Valid entry */
 
@@ -1458,10 +1458,10 @@
  *
  * @dev:    The Linux PCI device structure for the device to map
  * @slot:   The slot number for this device on __BUS 0__. Linux
- *               enumerates through all the bridges and figures out the
- *               slot on Bus 0 where this device eventually hooks to.
+ *		 enumerates through all the bridges and figures out the
+ *		 slot on Bus 0 where this device eventually hooks to.
  * @pin:    The PCI interrupt pin read from the device, then swizzled
- *               as it goes through each bridge.
+ *		 as it goes through each bridge.
  * Returns Interrupt number for the device
  */
 int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev,
@@ -1503,7 +1503,7 @@
 	return pin - 1 + OCTEON_IRQ_PCI_INT0;
 }
 
-static  void set_cfg_read_retry(u32 retry_cnt)
+static	void set_cfg_read_retry(u32 retry_cnt)
 {
 	union cvmx_pemx_ctl_status pemx_ctl;
 	pemx_ctl.u64 = cvmx_read_csr(CVMX_PEMX_CTL_STATUS(1));
@@ -1931,7 +1931,7 @@
 			OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) {
 			sriox_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(0));
 			if (sriox_status_reg.s.srio) {
-				srio_war15205 += 1;      /* Port is SRIO */
+				srio_war15205 += 1;	 /* Port is SRIO */
 				port = 0;
 			}
 		}
@@ -2004,7 +2004,7 @@
 			OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) {
 			sriox_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(1));
 			if (sriox_status_reg.s.srio) {
-				srio_war15205 += 1;      /* Port is SRIO */
+				srio_war15205 += 1;	 /* Port is SRIO */
 				port = 1;
 			}
 		}
diff --git a/arch/mips/pmc-sierra/Platform b/arch/mips/pmc-sierra/Platform
deleted file mode 100644
index 387fda6..0000000
--- a/arch/mips/pmc-sierra/Platform
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# PMC-Sierra MSP SOCs
-#
-platform-$(CONFIG_PMC_MSP)	+= pmc-sierra/msp71xx/
-cflags-$(CONFIG_PMC_MSP)	+= -I$(srctree)/arch/mips/include/asm/pmc-sierra/msp71xx \
-					-mno-branch-likely
-load-$(CONFIG_PMC_MSP)		+= 0xffffffff80100000
diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig
similarity index 100%
rename from arch/mips/pmc-sierra/Kconfig
rename to arch/mips/pmcs-msp71xx/Kconfig
diff --git a/arch/mips/pmc-sierra/msp71xx/Makefile b/arch/mips/pmcs-msp71xx/Makefile
similarity index 100%
rename from arch/mips/pmc-sierra/msp71xx/Makefile
rename to arch/mips/pmcs-msp71xx/Makefile
diff --git a/arch/mips/pmcs-msp71xx/Platform b/arch/mips/pmcs-msp71xx/Platform
new file mode 100644
index 0000000..7af0734
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/Platform
@@ -0,0 +1,7 @@
+#
+# PMC-Sierra MSP SOCs
+#
+platform-$(CONFIG_PMC_MSP)	+= pmcs-msp71xx/
+cflags-$(CONFIG_PMC_MSP)	+= -I$(srctree)/arch/mips/include/asm/mach-pmcs-msp71xx \
+					-mno-branch-likely
+load-$(CONFIG_PMC_MSP)		+= 0xffffffff80100000
diff --git a/arch/mips/pmc-sierra/msp71xx/gpio.c b/arch/mips/pmcs-msp71xx/gpio.c
similarity index 100%
rename from arch/mips/pmc-sierra/msp71xx/gpio.c
rename to arch/mips/pmcs-msp71xx/gpio.c
diff --git a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c b/arch/mips/pmcs-msp71xx/gpio_extended.c
similarity index 100%
rename from arch/mips/pmc-sierra/msp71xx/gpio_extended.c
rename to arch/mips/pmcs-msp71xx/gpio_extended.c
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_elb.c b/arch/mips/pmcs-msp71xx/msp_elb.c
similarity index 100%
rename from arch/mips/pmc-sierra/msp71xx/msp_elb.c
rename to arch/mips/pmcs-msp71xx/msp_elb.c
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_eth.c b/arch/mips/pmcs-msp71xx/msp_eth.c
similarity index 100%
rename from arch/mips/pmc-sierra/msp71xx/msp_eth.c
rename to arch/mips/pmcs-msp71xx/msp_eth.c
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c b/arch/mips/pmcs-msp71xx/msp_hwbutton.c
similarity index 100%
rename from arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
rename to arch/mips/pmcs-msp71xx/msp_hwbutton.c
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq.c b/arch/mips/pmcs-msp71xx/msp_irq.c
similarity index 96%
rename from arch/mips/pmc-sierra/msp71xx/msp_irq.c
rename to arch/mips/pmcs-msp71xx/msp_irq.c
index d3c3d81..9da5619 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_irq.c
+++ b/arch/mips/pmcs-msp71xx/msp_irq.c
@@ -41,9 +41,9 @@
 
 /*
  * The PMC-Sierra MSP interrupts are arranged in a 3 level cascaded
- * hierarchical system.  The first level are the direct MIPS interrupts
+ * hierarchical system.	 The first level are the direct MIPS interrupts
  * and are assigned the interrupt range 0-7.  The second level is the SLM
- * interrupt controller and is assigned the range 8-39.  The third level
+ * interrupt controller and is assigned the range 8-39.	 The third level
  * comprises the Peripherial block, the PCI block, the PCI MSI block and
  * the SLP.  The PCI interrupts and the SLP errors are handled by the
  * relevant subsystems so the core interrupt code needs only concern
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c b/arch/mips/pmcs-msp71xx/msp_irq_cic.c
similarity index 96%
rename from arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c
rename to arch/mips/pmcs-msp71xx/msp_irq_cic.c
index 2e6f7ca..e49b499 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c
+++ b/arch/mips/pmcs-msp71xx/msp_irq_cic.c
@@ -3,8 +3,8 @@
  *
  * This file define the irq handler for MSP CIC subsystem interrupts.
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -171,7 +171,7 @@
 	/* Mask/clear interrupts. */
 	*CIC_VPE0_MSK_REG = 0x00000000;
 	*CIC_VPE1_MSK_REG = 0x00000000;
-	*CIC_STS_REG      = 0xFFFFFFFF;
+	*CIC_STS_REG	  = 0xFFFFFFFF;
 	/*
 	* The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI.
 	* These inputs map to EXT_INT_POL[6:4] inside the CIC.
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c b/arch/mips/pmcs-msp71xx/msp_irq_per.c
similarity index 94%
rename from arch/mips/pmc-sierra/msp71xx/msp_irq_per.c
rename to arch/mips/pmcs-msp71xx/msp_irq_per.c
index 598b6a6..d1fd530 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c
+++ b/arch/mips/pmcs-msp71xx/msp_irq_per.c
@@ -3,8 +3,8 @@
  *
  * This file define the irq handler for MSP PER subsystem interrupts.
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c b/arch/mips/pmcs-msp71xx/msp_irq_slp.c
similarity index 94%
rename from arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
rename to arch/mips/pmcs-msp71xx/msp_irq_slp.c
index 83a1c5e..5f66a763 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
+++ b/arch/mips/pmcs-msp71xx/msp_irq_slp.c
@@ -4,8 +4,8 @@
  * Copyright 2005-2006 PMC-Sierra, Inc, derived from irq_cpu.c
  * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_pci.c b/arch/mips/pmcs-msp71xx/msp_pci.c
similarity index 97%
rename from arch/mips/pmc-sierra/msp71xx/msp_pci.c
rename to arch/mips/pmcs-msp71xx/msp_pci.c
index f764fe7..428dea2 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_pci.c
+++ b/arch/mips/pmcs-msp71xx/msp_pci.c
@@ -36,7 +36,7 @@
 #if 0 /* Linux 2.6 initialization code to be completed */
 	if (getdeviceid() & DEV_ID_SINGLE_PC) {
 		/* If single card mode */
-		slmRegs	*sreg = (slmRegs *) SREG_BASE;
+		slmRegs *sreg = (slmRegs *) SREG_BASE;
 
 		sreg->single_pc_enable = SINGLE_PCCARD;
 	}
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_prom.c b/arch/mips/pmcs-msp71xx/msp_prom.c
similarity index 98%
rename from arch/mips/pmc-sierra/msp71xx/msp_prom.c
rename to arch/mips/pmcs-msp71xx/msp_prom.c
index db00deb..0edb89a 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_prom.c
+++ b/arch/mips/pmcs-msp71xx/msp_prom.c
@@ -99,7 +99,7 @@
 		}
 	}
 
-	if (index == 5)	{
+	if (index == 5) {
 		ea[index++] = num;
 		return 0;
 	} else
@@ -285,7 +285,7 @@
 char *prom_getenv(char *env_name)
 {
 	/*
-	 * Return a pointer to the given environment variable.  prom_envp
+	 * Return a pointer to the given environment variable.	prom_envp
 	 * points to a null terminated array of pointers to variables.
 	 * Environment variables are stored in the form of "memsize=64"
 	 */
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmcs-msp71xx/msp_serial.c
similarity index 87%
rename from arch/mips/pmc-sierra/msp71xx/msp_serial.c
rename to arch/mips/pmcs-msp71xx/msp_serial.c
index a1c7c7d..d304be2 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmcs-msp71xx/msp_serial.c
@@ -90,8 +90,8 @@
 
 void __init msp_serial_setup(void)
 {
-	char    *s;
-	char    *endp;
+	char	*s;
+	char	*endp;
 	struct uart_port up;
 	unsigned int uartclk;
 
@@ -104,19 +104,19 @@
 	ppfinit("UART clock set to %d\n", uartclk);
 
 	/* Initialize first serial port */
-	up.mapbase      = MSP_UART0_BASE;
-	up.membase      = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
-	up.irq          = MSP_INT_UART0;
-	up.uartclk      = uartclk;
-	up.regshift     = 2;
-	up.iotype       = UPIO_MEM;
-	up.flags        = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
-	up.type         = PORT_16550A;
-	up.line         = 0;
+	up.mapbase	= MSP_UART0_BASE;
+	up.membase	= ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
+	up.irq		= MSP_INT_UART0;
+	up.uartclk	= uartclk;
+	up.regshift	= 2;
+	up.iotype	= UPIO_MEM;
+	up.flags	= ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	up.type		= PORT_16550A;
+	up.line		= 0;
 	up.serial_out	= msp_serial_out;
 	up.serial_in	= msp_serial_in;
 	up.handle_irq	= msp_serial_handle_irq;
-	up.private_data	= kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL);
+	up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL);
 	if (!up.private_data) {
 		pr_err("failed to allocate uart private data\n");
 		return;
@@ -142,10 +142,10 @@
 			return; /* No second serial port, good-bye. */
 	}
 
-	up.mapbase      = MSP_UART1_BASE;
-	up.membase      = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
-	up.irq          = MSP_INT_UART1;
-	up.line         = 1;
+	up.mapbase	= MSP_UART1_BASE;
+	up.membase	= ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
+	up.irq		= MSP_INT_UART1;
+	up.line		= 1;
 	up.private_data		= (void*)UART1_STATUS_REG;
 	if (early_serial_setup(&up)) {
 		kfree(up.private_data);
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c
similarity index 95%
rename from arch/mips/pmc-sierra/msp71xx/msp_setup.c
rename to arch/mips/pmcs-msp71xx/msp_setup.c
index 7a834b2..1651cfd 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c
+++ b/arch/mips/pmcs-msp71xx/msp_setup.c
@@ -4,8 +4,8 @@
  * Copyright 2005-2007 PMC-Sierra, Inc,
  * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -168,7 +168,7 @@
 	family = identify_family();
 	revision = identify_revision();
 
-	switch (family)	{
+	switch (family) {
 	case FAMILY_FPGA:
 		if (FPGA_IS_MSP4200(revision)) {
 			/* Old-style revision ID */
@@ -219,7 +219,7 @@
 
 	/*
 	 * Sub-system setup follows.
-	 * Setup functions can  either be called here or using the
+	 * Setup functions can	either be called here or using the
 	 * subsys_initcall mechanism (i.e. see msp_pci_setup). The
 	 * order in which they are called can be changed by using the
 	 * link order in arch/mips/pmc-sierra/msp71xx/Makefile.
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_smp.c b/arch/mips/pmcs-msp71xx/msp_smp.c
similarity index 100%
rename from arch/mips/pmc-sierra/msp71xx/msp_smp.c
rename to arch/mips/pmcs-msp71xx/msp_smp.c
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_smtc.c b/arch/mips/pmcs-msp71xx/msp_smtc.c
similarity index 100%
rename from arch/mips/pmc-sierra/msp71xx/msp_smtc.c
rename to arch/mips/pmcs-msp71xx/msp_smtc.c
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_time.c b/arch/mips/pmcs-msp71xx/msp_time.c
similarity index 98%
rename from arch/mips/pmc-sierra/msp71xx/msp_time.c
rename to arch/mips/pmcs-msp71xx/msp_time.c
index 8b42f30..8f12ecc 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_time.c
+++ b/arch/mips/pmcs-msp71xx/msp_time.c
@@ -45,7 +45,7 @@
 
 void __init plat_time_init(void)
 {
-	char    *endp, *s;
+	char	*endp, *s;
 	unsigned long cpu_rate = 0;
 
 	if (cpu_rate == 0) {
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_usb.c b/arch/mips/pmcs-msp71xx/msp_usb.c
similarity index 87%
rename from arch/mips/pmc-sierra/msp71xx/msp_usb.c
rename to arch/mips/pmcs-msp71xx/msp_usb.c
index 9a1aef8..4dab915 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_usb.c
+++ b/arch/mips/pmcs-msp71xx/msp_usb.c
@@ -40,14 +40,14 @@
 #if defined(CONFIG_USB_EHCI_HCD)
 static struct resource msp_usbhost0_resources[] = {
 	[0] = { /* EHCI-HS operational and capabilities registers */
-		.start  = MSP_USB0_HS_START,
-		.end    = MSP_USB0_HS_END,
-		.flags  = IORESOURCE_MEM,
+		.start	= MSP_USB0_HS_START,
+		.end	= MSP_USB0_HS_END,
+		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = MSP_INT_USB,
-		.end    = MSP_INT_USB,
-		.flags  = IORESOURCE_IRQ,
+		.start	= MSP_INT_USB,
+		.end	= MSP_INT_USB,
+		.flags	= IORESOURCE_IRQ,
 	},
 	[2] = { /* MSBus-to-AMBA bridge register space */
 		.start	= MSP_USB0_MAB_START,
@@ -71,8 +71,8 @@
 			.dma_mask = &msp_usbhost0_dma_mask,
 			.coherent_dma_mask = 0xffffffffUL,
 		},
-		.num_resources  = ARRAY_SIZE(msp_usbhost0_resources),
-		.resource       = msp_usbhost0_resources,
+		.num_resources	= ARRAY_SIZE(msp_usbhost0_resources),
+		.resource	= msp_usbhost0_resources,
 	},
 };
 
@@ -121,14 +121,14 @@
 #if defined(CONFIG_USB_GADGET)
 static struct resource msp_usbdev0_resources[] = {
 	[0] = { /* EHCI-HS operational and capabilities registers */
-		.start  = MSP_USB0_HS_START,
-		.end    = MSP_USB0_HS_END,
-		.flags  = IORESOURCE_MEM,
+		.start	= MSP_USB0_HS_START,
+		.end	= MSP_USB0_HS_END,
+		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = MSP_INT_USB,
-		.end    = MSP_INT_USB,
-		.flags  = IORESOURCE_IRQ,
+		.start	= MSP_INT_USB,
+		.end	= MSP_INT_USB,
+		.flags	= IORESOURCE_IRQ,
 	},
 	[2] = { /* MSBus-to-AMBA bridge register space */
 		.start	= MSP_USB0_MAB_START,
@@ -153,22 +153,22 @@
 			.dma_mask = &msp_usbdev_dma_mask,
 			.coherent_dma_mask = 0xffffffffUL,
 		},
-		.num_resources  = ARRAY_SIZE(msp_usbdev0_resources),
-		.resource       = msp_usbdev0_resources,
+		.num_resources	= ARRAY_SIZE(msp_usbdev0_resources),
+		.resource	= msp_usbdev0_resources,
 	},
 };
 
 #ifdef CONFIG_MSP_HAS_DUAL_USB
 static struct resource msp_usbdev1_resources[] = {
 	[0] = { /* EHCI-HS operational and capabilities registers */
-		.start  = MSP_USB1_HS_START,
-		.end    = MSP_USB1_HS_END,
-		.flags  = IORESOURCE_MEM,
+		.start	= MSP_USB1_HS_START,
+		.end	= MSP_USB1_HS_END,
+		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = MSP_INT_USB,
-		.end    = MSP_INT_USB,
-		.flags  = IORESOURCE_IRQ,
+		.start	= MSP_INT_USB,
+		.end	= MSP_INT_USB,
+		.flags	= IORESOURCE_IRQ,
 	},
 	[2] = { /* MSBus-to-AMBA bridge register space */
 		.start	= MSP_USB1_MAB_START,
@@ -191,8 +191,8 @@
 			.dma_mask = &msp_usbdev_dma_mask,
 			.coherent_dma_mask = 0xffffffffUL,
 		},
-		.num_resources  = ARRAY_SIZE(msp_usbdev1_resources),
-		.resource       = msp_usbdev1_resources,
+		.num_resources	= ARRAY_SIZE(msp_usbdev1_resources),
+		.resource	= msp_usbdev1_resources,
 	},
 };
 
@@ -211,7 +211,7 @@
 	/*
 	 * Could this perhaps be integrated into the "features" env var?
 	 * Use the features key "U", and follow with "H" for host-mode,
-	 * "D" for device-mode.  If it works for Ethernet, why not USB...
+	 * "D" for device-mode.	 If it works for Ethernet, why not USB...
 	 *  -- hammtrev, 2007/03/22
 	 */
 	snprintf((char *)&envstr[0], sizeof(envstr), "usbmode");
@@ -237,7 +237,7 @@
 #endif
 #else
 		ppfinit("%s: echi_hcd not supported\n", __FILE__);
-#endif  /* CONFIG_USB_EHCI_HCD */
+#endif	/* CONFIG_USB_EHCI_HCD */
 	} else {
 #if defined(CONFIG_USB_GADGET)
 		/* get device mode structure */
@@ -251,7 +251,7 @@
 #endif
 #else
 		ppfinit("%s: usb_gadget not supported\n", __FILE__);
-#endif  /* CONFIG_USB_GADGET */
+#endif	/* CONFIG_USB_GADGET */
 	}
 	/* add device */
 	platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs));
diff --git a/arch/mips/pnx833x/Platform b/arch/mips/pnx833x/Platform
index 7e6ec4d..794526c 100644
--- a/arch/mips/pnx833x/Platform
+++ b/arch/mips/pnx833x/Platform
@@ -1,5 +1,5 @@
 # NXP STB225
 platform-$(CONFIG_SOC_PNX833X)	+= pnx833x/
-cflags-$(CONFIG_SOC_PNX833X)    += -Iarch/mips/include/asm/mach-pnx833x
+cflags-$(CONFIG_SOC_PNX833X)	+= -Iarch/mips/include/asm/mach-pnx833x
 load-$(CONFIG_NXP_STB220)	+= 0xffffffff80001000
 load-$(CONFIG_NXP_STB225)	+= 0xffffffff80001000
diff --git a/arch/mips/pnx833x/common/interrupts.c b/arch/mips/pnx833x/common/interrupts.c
index a86d5d5..a4a9059 100644
--- a/arch/mips/pnx833x/common/interrupts.c
+++ b/arch/mips/pnx833x/common/interrupts.c
@@ -35,64 +35,64 @@
 static const unsigned int irq_prio[PNX833X_PIC_NUM_IRQ] =
 {
     0, /* unused */
-    4, /* PNX833X_PIC_I2C0_INT                 1 */
-    4, /* PNX833X_PIC_I2C1_INT                 2 */
-    1, /* PNX833X_PIC_UART0_INT                3 */
-    1, /* PNX833X_PIC_UART1_INT                4 */
-    6, /* PNX833X_PIC_TS_IN0_DV_INT            5 */
-    6, /* PNX833X_PIC_TS_IN0_DMA_INT           6 */
-    7, /* PNX833X_PIC_GPIO_INT                 7 */
-    4, /* PNX833X_PIC_AUDIO_DEC_INT            8 */
-    5, /* PNX833X_PIC_VIDEO_DEC_INT            9 */
-    4, /* PNX833X_PIC_CONFIG_INT              10 */
-    4, /* PNX833X_PIC_AOI_INT                 11 */
-    9, /* PNX833X_PIC_SYNC_INT                12 */
-    9, /* PNX8335_PIC_SATA_INT                13 */
-    4, /* PNX833X_PIC_OSD_INT                 14 */
-    9, /* PNX833X_PIC_DISP1_INT               15 */
-    4, /* PNX833X_PIC_DEINTERLACER_INT        16 */
-    9, /* PNX833X_PIC_DISPLAY2_INT            17 */
-    4, /* PNX833X_PIC_VC_INT                  18 */
-    4, /* PNX833X_PIC_SC_INT                  19 */
-    9, /* PNX833X_PIC_IDE_INT                 20 */
-    9, /* PNX833X_PIC_IDE_DMA_INT             21 */
-    6, /* PNX833X_PIC_TS_IN1_DV_INT           22 */
-    6, /* PNX833X_PIC_TS_IN1_DMA_INT          23 */
-    4, /* PNX833X_PIC_SGDX_DMA_INT            24 */
-    4, /* PNX833X_PIC_TS_OUT_INT              25 */
-    4, /* PNX833X_PIC_IR_INT                  26 */
-    3, /* PNX833X_PIC_VMSP1_INT               27 */
-    3, /* PNX833X_PIC_VMSP2_INT               28 */
-    4, /* PNX833X_PIC_PIBC_INT                29 */
-    4, /* PNX833X_PIC_TS_IN0_TRD_INT          30 */
-    4, /* PNX833X_PIC_SGDX_TPD_INT            31 */
-    5, /* PNX833X_PIC_USB_INT                 32 */
-    4, /* PNX833X_PIC_TS_IN1_TRD_INT          33 */
-    4, /* PNX833X_PIC_CLOCK_INT               34 */
-    4, /* PNX833X_PIC_SGDX_PARSER_INT         35 */
-    4, /* PNX833X_PIC_VMSP_DMA_INT            36 */
+    4, /* PNX833X_PIC_I2C0_INT		       1 */
+    4, /* PNX833X_PIC_I2C1_INT		       2 */
+    1, /* PNX833X_PIC_UART0_INT		       3 */
+    1, /* PNX833X_PIC_UART1_INT		       4 */
+    6, /* PNX833X_PIC_TS_IN0_DV_INT	       5 */
+    6, /* PNX833X_PIC_TS_IN0_DMA_INT	       6 */
+    7, /* PNX833X_PIC_GPIO_INT		       7 */
+    4, /* PNX833X_PIC_AUDIO_DEC_INT	       8 */
+    5, /* PNX833X_PIC_VIDEO_DEC_INT	       9 */
+    4, /* PNX833X_PIC_CONFIG_INT	      10 */
+    4, /* PNX833X_PIC_AOI_INT		      11 */
+    9, /* PNX833X_PIC_SYNC_INT		      12 */
+    9, /* PNX8335_PIC_SATA_INT		      13 */
+    4, /* PNX833X_PIC_OSD_INT		      14 */
+    9, /* PNX833X_PIC_DISP1_INT		      15 */
+    4, /* PNX833X_PIC_DEINTERLACER_INT	      16 */
+    9, /* PNX833X_PIC_DISPLAY2_INT	      17 */
+    4, /* PNX833X_PIC_VC_INT		      18 */
+    4, /* PNX833X_PIC_SC_INT		      19 */
+    9, /* PNX833X_PIC_IDE_INT		      20 */
+    9, /* PNX833X_PIC_IDE_DMA_INT	      21 */
+    6, /* PNX833X_PIC_TS_IN1_DV_INT	      22 */
+    6, /* PNX833X_PIC_TS_IN1_DMA_INT	      23 */
+    4, /* PNX833X_PIC_SGDX_DMA_INT	      24 */
+    4, /* PNX833X_PIC_TS_OUT_INT	      25 */
+    4, /* PNX833X_PIC_IR_INT		      26 */
+    3, /* PNX833X_PIC_VMSP1_INT		      27 */
+    3, /* PNX833X_PIC_VMSP2_INT		      28 */
+    4, /* PNX833X_PIC_PIBC_INT		      29 */
+    4, /* PNX833X_PIC_TS_IN0_TRD_INT	      30 */
+    4, /* PNX833X_PIC_SGDX_TPD_INT	      31 */
+    5, /* PNX833X_PIC_USB_INT		      32 */
+    4, /* PNX833X_PIC_TS_IN1_TRD_INT	      33 */
+    4, /* PNX833X_PIC_CLOCK_INT		      34 */
+    4, /* PNX833X_PIC_SGDX_PARSER_INT	      35 */
+    4, /* PNX833X_PIC_VMSP_DMA_INT	      36 */
 #if defined(CONFIG_SOC_PNX8335)
-    4, /* PNX8335_PIC_MIU_INT                 37 */
-    4, /* PNX8335_PIC_AVCHIP_IRQ_INT          38 */
-    9, /* PNX8335_PIC_SYNC_HD_INT             39 */
-    9, /* PNX8335_PIC_DISP_HD_INT             40 */
-    9, /* PNX8335_PIC_DISP_SCALER_INT         41 */
-    4, /* PNX8335_PIC_OSD_HD1_INT             42 */
-    4, /* PNX8335_PIC_DTL_WRITER_Y_INT        43 */
-    4, /* PNX8335_PIC_DTL_WRITER_C_INT        44 */
+    4, /* PNX8335_PIC_MIU_INT		      37 */
+    4, /* PNX8335_PIC_AVCHIP_IRQ_INT	      38 */
+    9, /* PNX8335_PIC_SYNC_HD_INT	      39 */
+    9, /* PNX8335_PIC_DISP_HD_INT	      40 */
+    9, /* PNX8335_PIC_DISP_SCALER_INT	      41 */
+    4, /* PNX8335_PIC_OSD_HD1_INT	      42 */
+    4, /* PNX8335_PIC_DTL_WRITER_Y_INT	      43 */
+    4, /* PNX8335_PIC_DTL_WRITER_C_INT	      44 */
     4, /* PNX8335_PIC_DTL_EMULATOR_Y_IR_INT   45 */
     4, /* PNX8335_PIC_DTL_EMULATOR_C_IR_INT   46 */
-    4, /* PNX8335_PIC_DENC_TTX_INT            47 */
-    4, /* PNX8335_PIC_MMI_SIF0_INT            48 */
-    4, /* PNX8335_PIC_MMI_SIF1_INT            49 */
-    4, /* PNX8335_PIC_MMI_CDMMU_INT           50 */
-    4, /* PNX8335_PIC_PIBCS_INT               51 */
-   12, /* PNX8335_PIC_ETHERNET_INT            52 */
-    3, /* PNX8335_PIC_VMSP1_0_INT             53 */
-    3, /* PNX8335_PIC_VMSP1_1_INT             54 */
-    4, /* PNX8335_PIC_VMSP1_DMA_INT           55 */
-    4, /* PNX8335_PIC_TDGR_DE_INT             56 */
-    4, /* PNX8335_PIC_IR1_IRQ_INT             57 */
+    4, /* PNX8335_PIC_DENC_TTX_INT	      47 */
+    4, /* PNX8335_PIC_MMI_SIF0_INT	      48 */
+    4, /* PNX8335_PIC_MMI_SIF1_INT	      49 */
+    4, /* PNX8335_PIC_MMI_CDMMU_INT	      50 */
+    4, /* PNX8335_PIC_PIBCS_INT		      51 */
+   12, /* PNX8335_PIC_ETHERNET_INT	      52 */
+    3, /* PNX8335_PIC_VMSP1_0_INT	      53 */
+    3, /* PNX8335_PIC_VMSP1_1_INT	      54 */
+    4, /* PNX8335_PIC_VMSP1_DMA_INT	      55 */
+    4, /* PNX8335_PIC_TDGR_DE_INT	      56 */
+    4, /* PNX8335_PIC_IR1_IRQ_INT	      57 */
 #endif
 };
 
diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c
index 05a1d92..d22dc0d 100644
--- a/arch/mips/pnx833x/common/platform.c
+++ b/arch/mips/pnx833x/common/platform.c
@@ -6,7 +6,7 @@
  *    Daniel Laird <daniel.j.laird@nxp.com>
  *
  *  Based on software written by:
- *      Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
+ *	Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -42,7 +42,7 @@
 #include <irq-mapping.h>
 #include <pnx833x.h>
 
-static u64 uart_dmamask     = DMA_BIT_MASK(32);
+static u64 uart_dmamask	    = DMA_BIT_MASK(32);
 
 static struct resource pnx833x_uart_resources[] = {
 	[0] = {
@@ -69,7 +69,7 @@
 
 struct pnx8xxx_port pnx8xxx_ports[] = {
 	[0] = {
-		.port   = {
+		.port	= {
 			.type		= PORT_PNX8XXX,
 			.iotype		= UPIO_MEM,
 			.membase	= (void __iomem *)PNX833X_UART0_PORTS_START,
@@ -82,7 +82,7 @@
 		},
 	},
 	[1] = {
-		.port   = {
+		.port	= {
 			.type		= PORT_PNX8XXX,
 			.iotype		= UPIO_MEM,
 			.membase	= (void __iomem *)PNX833X_UART1_PORTS_START,
@@ -108,7 +108,7 @@
 	.resource	= pnx833x_uart_resources,
 };
 
-static u64 ehci_dmamask     = DMA_BIT_MASK(32);
+static u64 ehci_dmamask	    = DMA_BIT_MASK(32);
 
 static struct resource pnx833x_usb_ehci_resources[] = {
 	[0] = {
@@ -183,7 +183,7 @@
 	.dev = {
 		.platform_data = &pnx833x_i2c_dev[0],
 	},
-	.num_resources  = ARRAY_SIZE(pnx833x_i2c0_resources),
+	.num_resources	= ARRAY_SIZE(pnx833x_i2c0_resources),
 	.resource	= pnx833x_i2c0_resources,
 };
 
@@ -193,7 +193,7 @@
 	.dev = {
 		.platform_data = &pnx833x_i2c_dev[1],
 	},
-	.num_resources  = ARRAY_SIZE(pnx833x_i2c1_resources),
+	.num_resources	= ARRAY_SIZE(pnx833x_i2c1_resources),
 	.resource	= pnx833x_i2c1_resources,
 };
 #endif
@@ -217,7 +217,7 @@
 	.name = "ip3902-eth",
 	.id   = -1,
 	.dev  = {
-		.dma_mask          = &ethernet_dmamask,
+		.dma_mask	   = &ethernet_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 	.num_resources = ARRAY_SIZE(pnx833x_ethernet_resources),
@@ -238,8 +238,8 @@
 };
 
 static struct platform_device pnx833x_sata_device = {
-	.name          = "pnx833x-sata",
-	.id            = -1,
+	.name	       = "pnx833x-sata",
+	.id	       = -1,
 	.num_resources = ARRAY_SIZE(pnx833x_sata_resources),
 	.resource      = pnx833x_sata_resources,
 };
@@ -265,7 +265,7 @@
 		.chip_delay		= 25,
 	},
 	.ctrl = {
-		.cmd_ctrl 		= pnx833x_flash_nand_cmd_ctrl
+		.cmd_ctrl		= pnx833x_flash_nand_cmd_ctrl
 	}
 };
 
@@ -274,17 +274,17 @@
  * 12 bytes more seems to be the standard that allows for NAND access.
  */
 static struct resource pnx833x_flash_nand_resource = {
-	.start 	= PNX8335_NAND_BASE,
-	.end 	= PNX8335_NAND_BASE + 12,
-	.flags 	= IORESOURCE_MEM,
+	.start	= PNX8335_NAND_BASE,
+	.end	= PNX8335_NAND_BASE + 12,
+	.flags	= IORESOURCE_MEM,
 };
 
 static struct platform_device pnx833x_flash_nand = {
-	.name	        = "gen_nand",
-	.id		        = -1,
+	.name		= "gen_nand",
+	.id			= -1,
 	.num_resources	= 1,
 	.resource	    = &pnx833x_flash_nand_resource,
-	.dev            = {
+	.dev		= {
 		.platform_data = &pnx833x_flash_nand_data,
 	},
 };
diff --git a/arch/mips/pnx833x/common/prom.c b/arch/mips/pnx833x/common/prom.c
index 29969f9..dfafdd7 100644
--- a/arch/mips/pnx833x/common/prom.c
+++ b/arch/mips/pnx833x/common/prom.c
@@ -6,7 +6,7 @@
  *    Daniel Laird <daniel.j.laird@nxp.com>
  *
  *  Based on software written by:
- *      Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
+ *	Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pnx833x/common/reset.c b/arch/mips/pnx833x/common/reset.c
index e0ea96d..5cc9a9b 100644
--- a/arch/mips/pnx833x/common/reset.c
+++ b/arch/mips/pnx833x/common/reset.c
@@ -6,7 +6,7 @@
  *    Daniel Laird <daniel.j.laird@nxp.com>
  *
  *  Based on software written by:
- *      Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
+ *	Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pnx833x/common/setup.c b/arch/mips/pnx833x/common/setup.c
index e51fbc4..99b4d94 100644
--- a/arch/mips/pnx833x/common/setup.c
+++ b/arch/mips/pnx833x/common/setup.c
@@ -6,7 +6,7 @@
  *    Daniel Laird <daniel.j.laird@nxp.com>
  *
  *  Based on software written by:
- *      Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
+ *	Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pnx833x/stb22x/board.c b/arch/mips/pnx833x/stb22x/board.c
index 4b328ac..2ac5203 100644
--- a/arch/mips/pnx833x/stb22x/board.c
+++ b/arch/mips/pnx833x/stb22x/board.c
@@ -6,7 +6,7 @@
  *    Daniel Laird <daniel.j.laird@nxp.com>
  *
  *  Based on software written by:
- *      Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
+ *	Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pnx8550/Makefile b/arch/mips/pnx8550/Makefile
deleted file mode 100644
index 3f7e856..0000000
--- a/arch/mips/pnx8550/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_SOC_PNX8550)	+= common/
-obj-$(CONFIG_PNX8550_JBS)	+= jbs/
-obj-$(CONFIG_PNX8550_STB810)	+= stb810/
diff --git a/arch/mips/pnx8550/Platform b/arch/mips/pnx8550/Platform
deleted file mode 100644
index 0e7fbde..0000000
--- a/arch/mips/pnx8550/Platform
+++ /dev/null
@@ -1,7 +0,0 @@
-platform-$(CONFIG_SOC_PNX8550)	+= pnx8550/
-
-cflags-$(CONFIG_SOC_PNX8550)	+=					\
-		-I$(srctree)/arch/mips/include/asm/mach-pnx8550
-
-load-$(CONFIG_PNX8550_JBS)	+= 0xffffffff80060000
-load-$(CONFIG_PNX8550_STB810)	+= 0xffffffff80060000
diff --git a/arch/mips/pnx8550/common/Makefile b/arch/mips/pnx8550/common/Makefile
deleted file mode 100644
index f8ce695..0000000
--- a/arch/mips/pnx8550/common/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Per Hallsmark, per.hallsmark@mvista.com
-#
-# ########################################################################
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# #######################################################################
-#
-# Makefile for the PNX8550 specific kernel interface routines
-# under Linux.
-#
-
-obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
-obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/mips/pnx8550/common/int.c b/arch/mips/pnx8550/common/int.c
deleted file mode 100644
index ec684b8..0000000
--- a/arch/mips/pnx8550/common/int.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- *
- * Copyright (C) 2005 Embedded Alley Solutions, Inc
- * Ported to 2.6.
- *
- * Per Hallsmark, per.hallsmark@mvista.com
- * Copyright (C) 2000, 2001 MIPS Technologies, Inc.
- * Copyright (C) 2001 Ralf Baechle
- *
- * Cleaned up and bug fixing: Pete Popov, ppopov@embeddedalley.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/random.h>
-#include <linux/module.h>
-
-#include <asm/io.h>
-#include <int.h>
-#include <uart.h>
-
-/* default prio for interrupts */
-/* first one is a no-no so therefore always prio 0 (disabled) */
-static char gic_prio[PNX8550_INT_GIC_TOTINT] = {
-	0, 1, 1, 1, 1, 15, 1, 1, 1, 1,	//   0 -  9
-	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  10 - 19
-	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  20 - 29
-	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  30 - 39
-	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  40 - 49
-	1, 1, 1, 1, 1, 1, 1, 1, 2, 1,	//  50 - 59
-	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  60 - 69
-	1			//  70
-};
-
-static void hw0_irqdispatch(int irq)
-{
-	/* find out which interrupt */
-	irq = PNX8550_GIC_VECTOR_0 >> 3;
-
-	if (irq == 0) {
-		printk("hw0_irqdispatch: irq 0, spurious interrupt?\n");
-		return;
-	}
-	do_IRQ(PNX8550_INT_GIC_MIN + irq);
-}
-
-
-static void timer_irqdispatch(int irq)
-{
-	irq = (0x01c0 & read_c0_config7()) >> 6;
-
-	if (unlikely(irq == 0)) {
-		printk("timer_irqdispatch: irq 0, spurious interrupt?\n");
-		return;
-	}
-
-	if (irq & 0x1)
-		do_IRQ(PNX8550_INT_TIMER1);
-	if (irq & 0x2)
-		do_IRQ(PNX8550_INT_TIMER2);
-	if (irq & 0x4)
-		do_IRQ(PNX8550_INT_TIMER3);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-	if (pending & STATUSF_IP2)
-		hw0_irqdispatch(2);
-	else if (pending & STATUSF_IP7) {
-		if (read_c0_config7() & 0x01c0)
-			timer_irqdispatch(7);
-	} else
-		spurious_interrupt();
-}
-
-static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask)
-{
-	unsigned long status = read_c0_status();
-
-	status &= ~((clr_mask & 0xFF) << 8);
-	status |= (set_mask & 0xFF) << 8;
-
-	write_c0_status(status);
-}
-
-static inline void mask_gic_int(unsigned int irq_nr)
-{
-	/* interrupt disabled, bit 26(WE_ENABLE)=1 and bit 16(enable)=0 */
-	PNX8550_GIC_REQ(irq_nr) = 1<<28; /* set priority to 0 */
-}
-
-static inline void unmask_gic_int(unsigned int irq_nr)
-{
-	/* set prio mask to lower four bits and enable interrupt */
-	PNX8550_GIC_REQ(irq_nr) = (1<<26 | 1<<16) | (1<<28) | gic_prio[irq_nr];
-}
-
-static inline void mask_irq(struct irq_data *d)
-{
-	unsigned int irq_nr = d->irq;
-
-	if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) {
-		modify_cp0_intmask(1 << irq_nr, 0);
-	} else if ((PNX8550_INT_GIC_MIN <= irq_nr) &&
-		(irq_nr <= PNX8550_INT_GIC_MAX)) {
-		mask_gic_int(irq_nr - PNX8550_INT_GIC_MIN);
-	} else if ((PNX8550_INT_TIMER_MIN <= irq_nr) &&
-		(irq_nr <= PNX8550_INT_TIMER_MAX)) {
-		modify_cp0_intmask(1 << 7, 0);
-	} else {
-		printk("mask_irq: irq %d doesn't exist!\n", irq_nr);
-	}
-}
-
-static inline void unmask_irq(struct irq_data *d)
-{
-	unsigned int irq_nr = d->irq;
-
-	if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) {
-		modify_cp0_intmask(0, 1 << irq_nr);
-	} else if ((PNX8550_INT_GIC_MIN <= irq_nr) &&
-		(irq_nr <= PNX8550_INT_GIC_MAX)) {
-		unmask_gic_int(irq_nr - PNX8550_INT_GIC_MIN);
-	} else if ((PNX8550_INT_TIMER_MIN <= irq_nr) &&
-		(irq_nr <= PNX8550_INT_TIMER_MAX)) {
-		modify_cp0_intmask(0, 1 << 7);
-	} else {
-		printk("mask_irq: irq %d doesn't exist!\n", irq_nr);
-	}
-}
-
-int pnx8550_set_gic_priority(int irq, int priority)
-{
-	int gic_irq = irq-PNX8550_INT_GIC_MIN;
-	int prev_priority = PNX8550_GIC_REQ(gic_irq) & 0xf;
-
-        gic_prio[gic_irq] = priority;
-	PNX8550_GIC_REQ(gic_irq) |= (0x10000000 | gic_prio[gic_irq]);
-
-	return prev_priority;
-}
-
-static struct irq_chip level_irq_type = {
-	.name =		"PNX Level IRQ",
-	.irq_mask =	mask_irq,
-	.irq_unmask =	unmask_irq,
-};
-
-static struct irqaction gic_action = {
-	.handler =	no_action,
-	.flags =	IRQF_NO_THREAD,
-	.name =		"GIC",
-};
-
-static struct irqaction timer_action = {
-	.handler =	no_action,
-	.flags =	IRQF_TIMER,
-	.name =		"Timer",
-};
-
-void __init arch_init_irq(void)
-{
-	int i;
-	int configPR;
-
-	for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++)
-		irq_set_chip_and_handler(i, &level_irq_type, handle_level_irq);
-
-	/* init of GIC/IPC interrupts */
-	/* should be done before cp0 since cp0 init enables the GIC int */
-	for (i = PNX8550_INT_GIC_MIN; i <= PNX8550_INT_GIC_MAX; i++) {
-		int gic_int_line = i - PNX8550_INT_GIC_MIN;
-		if (gic_int_line == 0 )
-			continue;	// don't fiddle with int 0
-		/*
-		 * enable change of TARGET, ENABLE and ACTIVE_LOW bits
-		 * set TARGET        0 to route through hw0 interrupt
-		 * set ACTIVE_LOW    0 active high  (correct?)
-		 *
-		 * We really should setup an interrupt description table
-		 * to do this nicely.
-		 * Note, PCI INTA is active low on the bus, but inverted
-		 * in the GIC, so to us it's active high.
-		 */
-		PNX8550_GIC_REQ(i - PNX8550_INT_GIC_MIN) = 0x1E000000;
-
-		/* mask/priority is still 0 so we will not get any
-		 * interrupts until it is unmasked */
-
-		irq_set_chip_and_handler(i, &level_irq_type, handle_level_irq);
-	}
-
-	/* Priority level 0 */
-	PNX8550_GIC_PRIMASK_0 = PNX8550_GIC_PRIMASK_1 = 0;
-
-	/* Set int vector table address */
-	PNX8550_GIC_VECTOR_0 = PNX8550_GIC_VECTOR_1 = 0;
-
-	irq_set_chip_and_handler(MIPS_CPU_GIC_IRQ, &level_irq_type,
-				 handle_level_irq);
-	setup_irq(MIPS_CPU_GIC_IRQ, &gic_action);
-
-	/* init of Timer interrupts */
-	for (i = PNX8550_INT_TIMER_MIN; i <= PNX8550_INT_TIMER_MAX; i++)
-		irq_set_chip_and_handler(i, &level_irq_type, handle_level_irq);
-
-	/* Stop Timer 1-3 */
-	configPR = read_c0_config7();
-	configPR |= 0x00000038;
-	write_c0_config7(configPR);
-
-	irq_set_chip_and_handler(MIPS_CPU_TIMER_IRQ, &level_irq_type,
-				 handle_level_irq);
-	setup_irq(MIPS_CPU_TIMER_IRQ, &timer_action);
-}
-
-EXPORT_SYMBOL(pnx8550_set_gic_priority);
diff --git a/arch/mips/pnx8550/common/pci.c b/arch/mips/pnx8550/common/pci.c
deleted file mode 100644
index 98e86dd..0000000
--- a/arch/mips/pnx8550/common/pci.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *
- * Author: source@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <pci.h>
-#include <glb.h>
-#include <nand.h>
-
-static struct resource pci_io_resource = {
-	.start	= PNX8550_PCIIO + 0x1000,	/* reserve regacy I/O space */
-	.end	= PNX8550_PCIIO + PNX8550_PCIIO_SIZE,
-	.name	= "pci IO space",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
-	.start	= PNX8550_PCIMEM,
-	.end	= PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1,
-	.name	= "pci memory space",
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops pnx8550_pci_ops;
-
-static struct pci_controller pnx8550_controller = {
-	.pci_ops	= &pnx8550_pci_ops,
-	.io_map_base	= PNX8550_PORT_BASE,
-	.io_resource	= &pci_io_resource,
-	.mem_resource	= &pci_mem_resource,
-};
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-static inline unsigned long get_system_mem_size(void)
-{
-	/* Read IP2031_RANK0_ADDR_LO */
-	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
-	/* Read IP2031_RANK1_ADDR_HI */
-	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
-	return dram_r1_hi - dram_r0_lo + 1;
-}
-
-static int __init pnx8550_pci_setup(void)
-{
-	int pci_mem_code;
-	int mem_size = get_system_mem_size() >> 20;
-
-	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
-	   Bit 1:Enable DAC Powerdown
-	  -> 0:DACs are enabled and are working normally
-	     1:DACs are powerdown
-	   Bit 0:Enable of PCI inta output
-	  -> 0 = Disable PCI inta output
-	     1 = Enable PCI inta output
-	*/
-	PNX8550_GLB2_ENAB_INTA_O = 0;
-
-	/* Calc the PCI mem size code */
-	if (mem_size >= 128)
-		pci_mem_code = SIZE_128M;
-	else if (mem_size >= 64)
-		pci_mem_code = SIZE_64M;
-	else if (mem_size >= 32)
-		pci_mem_code = SIZE_32M;
-	else
-		pci_mem_code = SIZE_16M;
-
-	/* Set PCI_XIO registers */
-	outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
-	outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
-	outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
-	outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
-
-	/* Send memory transaction via PCI_BASE2 */
-	outl(0x00000001, PCI_BASE | PCI_IO);
-
-	/* Unlock the setup register */
-	outl(0xca, PCI_BASE | PCI_UNLOCKREG);
-
-	/*
-	 * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
-	 * to work, and in order for bus_to_baddr to work without any
-	 * hacks.
-	 */
-	outl(0x00000000, PCI_BASE | PCI_BASE10);
-
-	/*
-	 *These two bars are set by default or the boot code.
-	 * However, it's safer to set them here so we're not boot
-	 * code dependent.
-	 */
-	outl(0x1be00000, PCI_BASE | PCI_BASE14);  /* PNX MMIO */
-	outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18);  /* XIO      */
-
-	outl(PCI_EN_TA |
-	     PCI_EN_PCI2MMI |
-	     PCI_EN_XIO |
-	     PCI_SETUP_BASE18_SIZE(SIZE_32M) |
-	     PCI_SETUP_BASE18_EN |
-	     PCI_SETUP_BASE14_EN |
-	     PCI_SETUP_BASE10_PREF |
-	     PCI_SETUP_BASE10_SIZE(pci_mem_code) |
-	     PCI_SETUP_CFGMANAGE_EN |
-	     PCI_SETUP_PCIARB_EN,
-	     PCI_BASE |
-	     PCI_SETUP);	/* PCI_SETUP */
-	outl(0x00000000, PCI_BASE | PCI_CTRL);	/* PCI_CONTROL */
-
-	register_pci_controller(&pnx8550_controller);
-
-	return 0;
-}
-
-arch_initcall(pnx8550_pci_setup);
diff --git a/arch/mips/pnx8550/common/platform.c b/arch/mips/pnx8550/common/platform.c
deleted file mode 100644
index 0a8faea..0000000
--- a/arch/mips/pnx8550/common/platform.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Platform device support for NXP PNX8550 SoCs
- *
- * Copyright 2005, Embedded Alley Solutions, Inc
- *
- * Based on arch/mips/au1000/common/platform.c
- * Platform device support for Au1x00 SoCs.
- *
- * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/resource.h>
-#include <linux/serial.h>
-#include <linux/serial_pnx8xxx.h>
-#include <linux/platform_device.h>
-#include <linux/usb/ohci_pdriver.h>
-
-#include <int.h>
-#include <usb.h>
-#include <uart.h>
-
-static struct resource pnx8550_usb_ohci_resources[] = {
-	[0] = {
-		.start		= PNX8550_USB_OHCI_OP_BASE,
-		.end		= PNX8550_USB_OHCI_OP_BASE +
-				  PNX8550_USB_OHCI_OP_LEN,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= PNX8550_INT_USB,
-		.end		= PNX8550_INT_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pnx8550_uart_resources[] = {
-	[0] = {
-		.start		= PNX8550_UART_PORT0,
-		.end		= PNX8550_UART_PORT0 + 0xfff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= PNX8550_UART_INT(0),
-		.end		= PNX8550_UART_INT(0),
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= PNX8550_UART_PORT1,
-		.end		= PNX8550_UART_PORT1 + 0xfff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[3] = {
-		.start		= PNX8550_UART_INT(1),
-		.end		= PNX8550_UART_INT(1),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-struct pnx8xxx_port pnx8xxx_ports[] = {
-	[0] = {
-		.port   = {
-			.type		= PORT_PNX8XXX,
-			.iotype		= UPIO_MEM,
-			.membase	= (void __iomem *)PNX8550_UART_PORT0,
-			.mapbase	= PNX8550_UART_PORT0,
-			.irq		= PNX8550_UART_INT(0),
-			.uartclk	= 3692300,
-			.fifosize	= 16,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 0,
-		},
-	},
-	[1] = {
-		.port   = {
-			.type		= PORT_PNX8XXX,
-			.iotype		= UPIO_MEM,
-			.membase	= (void __iomem *)PNX8550_UART_PORT1,
-			.mapbase	= PNX8550_UART_PORT1,
-			.irq		= PNX8550_UART_INT(1),
-			.uartclk	= 3692300,
-			.fifosize	= 16,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 1,
-		},
-	},
-};
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-
-static u64 uart_dmamask = DMA_BIT_MASK(32);
-
-static int pnx8550_usb_ohci_power_on(struct platform_device *pdev)
-{
-	/*
-	 * Set register CLK48CTL to enable and 48MHz
-	 */
-	outl(0x00000003, PCI_BASE | 0x0004770c);
-
-	/*
-	 * Set register CLK12CTL to enable and 48MHz
-	 */
-	outl(0x00000003, PCI_BASE | 0x00047710);
-
-	udelay(100);
-
-	return 0;
-}
-
-static void pnx8550_usb_ohci_power_off(struct platform_device *pdev)
-{
-	udelay(10);
-}
-
-static struct usb_ohci_pdata pnx8550_usb_ohci_pdata = {
-	.power_on	= pnx8550_usb_ohci_power_on,
-	.power_off	= pnx8550_usb_ohci_power_off,
-};
-
-static struct platform_device pnx8550_usb_ohci_device = {
-	.name		= "ohci-platform",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &pnx8550_usb_ohci_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(pnx8550_usb_ohci_resources),
-	.resource	= pnx8550_usb_ohci_resources,
-};
-
-static struct platform_device pnx8550_uart_device = {
-	.name		= "pnx8xxx-uart",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &uart_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = pnx8xxx_ports,
-	},
-	.num_resources	= ARRAY_SIZE(pnx8550_uart_resources),
-	.resource	= pnx8550_uart_resources,
-};
-
-static struct platform_device *pnx8550_platform_devices[] __initdata = {
-	&pnx8550_usb_ohci_device,
-	&pnx8550_uart_device,
-};
-
-static int __init pnx8550_platform_init(void)
-{
-	return platform_add_devices(pnx8550_platform_devices,
-			            ARRAY_SIZE(pnx8550_platform_devices));
-}
-
-arch_initcall(pnx8550_platform_init);
diff --git a/arch/mips/pnx8550/common/proc.c b/arch/mips/pnx8550/common/proc.c
deleted file mode 100644
index 3bba5ec..0000000
--- a/arch/mips/pnx8550/common/proc.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/proc_fs.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/random.h>
-
-#include <asm/io.h>
-#include <int.h>
-#include <uart.h>
-
-
-static int pnx8550_timers_read(char* page, char** start, off_t offset, int count, int* eof, void* data)
-{
-        int len = 0;
-	int configPR = read_c0_config7();
-
-        if (offset==0) {
-		len += sprintf(&page[len], "Timer:       count,  compare, tc, status\n");
-                len += sprintf(&page[len], "    1: %11i, %8i,  %1i, %s\n",
-			       read_c0_count(), read_c0_compare(),
-			      (configPR>>6)&0x1, ((configPR>>3)&0x1)? "off":"on");
-                len += sprintf(&page[len], "    2: %11i, %8i,  %1i, %s\n",
-			       read_c0_count2(), read_c0_compare2(),
-			      (configPR>>7)&0x1, ((configPR>>4)&0x1)? "off":"on");
-                len += sprintf(&page[len], "    3: %11i, %8i,  %1i, %s\n",
-			       read_c0_count3(), read_c0_compare3(),
-			      (configPR>>8)&0x1, ((configPR>>5)&0x1)? "off":"on");
-        }
-
-        return len;
-}
-
-static int pnx8550_registers_read(char* page, char** start, off_t offset, int count, int* eof, void* data)
-{
-        int len = 0;
-
-        if (offset==0) {
-                len += sprintf(&page[len], "config1:   %#10.8x\n", read_c0_config1());
-                len += sprintf(&page[len], "config2:   %#10.8x\n", read_c0_config2());
-                len += sprintf(&page[len], "config3:   %#10.8x\n", read_c0_config3());
-                len += sprintf(&page[len], "configPR:  %#10.8x\n", read_c0_config7());
-                len += sprintf(&page[len], "status:    %#10.8x\n", read_c0_status());
-                len += sprintf(&page[len], "cause:     %#10.8x\n", read_c0_cause());
-                len += sprintf(&page[len], "count:     %#10.8x\n", read_c0_count());
-                len += sprintf(&page[len], "count_2:   %#10.8x\n", read_c0_count2());
-                len += sprintf(&page[len], "count_3:   %#10.8x\n", read_c0_count3());
-                len += sprintf(&page[len], "compare:   %#10.8x\n", read_c0_compare());
-                len += sprintf(&page[len], "compare_2: %#10.8x\n", read_c0_compare2());
-                len += sprintf(&page[len], "compare_3: %#10.8x\n", read_c0_compare3());
-        }
-
-        return len;
-}
-
-static struct proc_dir_entry* pnx8550_dir;
-static struct proc_dir_entry* pnx8550_timers;
-static struct proc_dir_entry* pnx8550_registers;
-
-static int pnx8550_proc_init( void )
-{
-
-	// Create /proc/pnx8550
-        pnx8550_dir = proc_mkdir("pnx8550", NULL);
-        if (!pnx8550_dir) {
-                printk(KERN_ERR "Can't create pnx8550 proc dir\n");
-                return -1;
-        }
-
-	// Create /proc/pnx8550/timers
-        pnx8550_timers = create_proc_read_entry(
-		"timers",
-		0,
-		pnx8550_dir,
-		pnx8550_timers_read,
-		NULL);
-
-        if (!pnx8550_timers)
-                printk(KERN_ERR "Can't create pnx8550 timers proc file\n");
-
-	// Create /proc/pnx8550/registers
-        pnx8550_registers = create_proc_read_entry(
-		"registers",
-		0,
-		pnx8550_dir,
-		pnx8550_registers_read,
-		NULL);
-
-        if (!pnx8550_registers)
-                printk(KERN_ERR "Can't create pnx8550 registers proc file\n");
-
-	return 0;
-}
-
-__initcall(pnx8550_proc_init);
diff --git a/arch/mips/pnx8550/common/prom.c b/arch/mips/pnx8550/common/prom.c
deleted file mode 100644
index 49639e8..0000000
--- a/arch/mips/pnx8550/common/prom.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- *
- * Per Hallsmark, per.hallsmark@mvista.com
- *
- * Based on jmr3927/common/prom.c
- *
- * 2004 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/serial_pnx8xxx.h>
-
-#include <asm/bootinfo.h>
-#include <uart.h>
-
-/* #define DEBUG_CMDLINE */
-
-extern int prom_argc;
-extern char **prom_argv, **prom_envp;
-
-typedef struct
-{
-    char *name;
-/*    char *val; */
-}t_env_var;
-
-
-char * __init prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
-
-void __init prom_init_cmdline(void)
-{
-	int i;
-
-	arcs_cmdline[0] = '\0';
-	for (i = 0; i < prom_argc; i++) {
-		strcat(arcs_cmdline, prom_argv[i]);
-		strcat(arcs_cmdline, " ");
-	}
-}
-
-char *prom_getenv(char *envname)
-{
-	/*
-	 * Return a pointer to the given environment variable.
-	 * Environment variables are stored in the form of "memsize=64".
-	 */
-
-	t_env_var *env = (t_env_var *)prom_envp;
-	int i;
-
-	i = strlen(envname);
-
-	while(env->name) {
-		if(strncmp(envname, env->name, i) == 0) {
-			return(env->name + strlen(envname) + 1);
-		}
-		env++;
-	}
-	return(NULL);
-}
-
-inline unsigned char str2hexnum(unsigned char c)
-{
-	if(c >= '0' && c <= '9')
-		return c - '0';
-	if(c >= 'a' && c <= 'f')
-		return c - 'a' + 10;
-	if(c >= 'A' && c <= 'F')
-		return c - 'A' + 10;
-	return 0; /* foo */
-}
-
-inline void str2eaddr(unsigned char *ea, unsigned char *str)
-{
-	int i;
-
-	for(i = 0; i < 6; i++) {
-		unsigned char num;
-
-		if((*str == '.') || (*str == ':'))
-			str++;
-		num = str2hexnum(*str++) << 4;
-		num |= (str2hexnum(*str++));
-		ea[i] = num;
-	}
-}
-
-int get_ethernet_addr(char *ethernet_addr)
-{
-        char *ethaddr_str;
-
-        ethaddr_str = prom_getenv("ethaddr");
-	if (!ethaddr_str) {
-	        printk("ethaddr not set in boot prom\n");
-		return -1;
-	}
-	str2eaddr(ethernet_addr, ethaddr_str);
-	return 0;
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-extern int pnx8550_console_port;
-
-/* used by early printk */
-void prom_putchar(char c)
-{
-	if (pnx8550_console_port != -1) {
-		/* Wait until FIFO not full */
-		while( ((ip3106_fifo(UART_BASE, pnx8550_console_port) & PNX8XXX_UART_FIFO_TXFIFO) >> 16) >= 16)
-			;
-		/* Send one char */
-		ip3106_fifo(UART_BASE, pnx8550_console_port) = c;
-	}
-}
-
-EXPORT_SYMBOL(get_ethernet_addr);
-EXPORT_SYMBOL(str2eaddr);
diff --git a/arch/mips/pnx8550/common/reset.c b/arch/mips/pnx8550/common/reset.c
deleted file mode 100644
index e7a12ff..0000000
--- a/arch/mips/pnx8550/common/reset.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Reset the PNX8550 board.
- *
- */
-#include <linux/kernel.h>
-
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <glb.h>
-
-void pnx8550_machine_restart(char *command)
-{
-	PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST;
-}
-
-void pnx8550_machine_halt(void)
-{
-	while (1) {
-		if (cpu_wait)
-			cpu_wait();
-	}
-}
diff --git a/arch/mips/pnx8550/common/setup.c b/arch/mips/pnx8550/common/setup.c
deleted file mode 100644
index fccd6b0..0000000
--- a/arch/mips/pnx8550/common/setup.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- *
- * 2.6 port, Embedded Alley Solutions, Inc
- *
- *  Based on Per Hallsmark, per.hallsmark@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/serial_pnx8xxx.h>
-#include <linux/pm.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/time.h>
-
-#include <glb.h>
-#include <int.h>
-#include <pci.h>
-#include <uart.h>
-#include <nand.h>
-
-extern void __init board_setup(void);
-extern void pnx8550_machine_restart(char *);
-extern void pnx8550_machine_halt(void);
-extern struct resource ioport_resource;
-extern struct resource iomem_resource;
-extern char *prom_getcmdline(void);
-
-struct resource standard_io_resources[] = {
-	{
-		.start	= 0x00,
-		.end	= 0x1f,
-		.name	= "dma1",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x40,
-		.end	= 0x5f,
-		.name	= "timer",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x80,
-		.end	= 0x8f,
-		.name	= "dma page reg",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0xc0,
-		.end	= 0xdf,
-		.name	= "dma2",
-		.flags	= IORESOURCE_BUSY
-	},
-};
-
-#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
-
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-unsigned long get_system_mem_size(void)
-{
-	/* Read IP2031_RANK0_ADDR_LO */
-	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
-	/* Read IP2031_RANK1_ADDR_HI */
-	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
-	return dram_r1_hi - dram_r0_lo + 1;
-}
-
-int pnx8550_console_port = -1;
-
-void __init plat_mem_setup(void)
-{
-	int i;
-	char* argptr;
-
-	board_setup();  /* board specific setup */
-
-        _machine_restart = pnx8550_machine_restart;
-        _machine_halt = pnx8550_machine_halt;
-        pm_power_off = pnx8550_machine_halt;
-
-	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
-	   Bit 1:Enable DAC Powerdown
-	  -> 0:DACs are enabled and are working normally
-	     1:DACs are powerdown
-	   Bit 0:Enable of PCI inta output
-	  -> 0 = Disable PCI inta output
-	     1 = Enable PCI inta output
-	*/
-	PNX8550_GLB2_ENAB_INTA_O = 0;
-
-	/* IO/MEM resources. */
-	set_io_port_base(PNX8550_PORT_BASE);
-	ioport_resource.start = 0;
-	ioport_resource.end = ~0;
-	iomem_resource.start = 0;
-	iomem_resource.end = ~0;
-
-	/* Request I/O space for devices on this board */
-	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
-		request_resource(&ioport_resource, standard_io_resources + i);
-
-	/* Place the Mode Control bit for GPIO pin 16 in primary function */
-	/* Pin 16 is used by UART1, UA1_TX                                */
-	outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
-			(PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
-			PNX8550_GPIO_MC1);
-
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
-		argptr += strlen("console=ttyS");
-		pnx8550_console_port = *argptr == '0' ? 0 : 1;
-
-		/* We must initialize the UART (console) before early printk */
-		/* Set LCR to 8-bit and BAUD to 38400 (no 5)                */
-		ip3106_lcr(UART_BASE, pnx8550_console_port) =
-			PNX8XXX_UART_LCR_8BIT;
-		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
-	}
-}
diff --git a/arch/mips/pnx8550/common/time.c b/arch/mips/pnx8550/common/time.c
deleted file mode 100644
index 831d6b3..0000000
--- a/arch/mips/pnx8550/common/time.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Copyright 2001, 2002, 2003 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
- *
- * Common time service routines for MIPS machines. See
- * Documents/MIPS/README.txt.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/param.h>
-#include <linux/time.h>
-#include <linux/timer.h>
-#include <linux/smp.h>
-#include <linux/kernel_stat.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-
-#include <asm/bootinfo.h>
-#include <asm/cpu.h>
-#include <asm/time.h>
-#include <asm/hardirq.h>
-#include <asm/div64.h>
-#include <asm/debug.h>
-
-#include <int.h>
-#include <cm.h>
-
-static unsigned long cpj;
-
-static cycle_t hpt_read(struct clocksource *cs)
-{
-	return read_c0_count2();
-}
-
-static struct clocksource pnx_clocksource = {
-	.name		= "pnx8xxx",
-	.rating		= 200,
-	.read		= hpt_read,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *c = dev_id;
-
-	/* clear MATCH, signal the event */
-	c->event_handler(c);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction pnx8xxx_timer_irq = {
-	.handler	= pnx8xxx_timer_interrupt,
-	.flags		= IRQF_PERCPU | IRQF_TIMER,
-	.name		= "pnx8xxx_timer",
-};
-
-static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
-{
-	/* Timer 2 clear interrupt */
-	write_c0_compare2(-1);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction monotonic_irqaction = {
-	.handler = monotonic_interrupt,
-	.flags = IRQF_TIMER,
-	.name = "Monotonic timer",
-};
-
-static int pnx8xxx_set_next_event(unsigned long delta,
-				struct clock_event_device *evt)
-{
-	write_c0_compare(delta);
-	return 0;
-}
-
-static struct clock_event_device pnx8xxx_clockevent = {
-	.name		= "pnx8xxx_clockevent",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event = pnx8xxx_set_next_event,
-};
-
-static inline void timer_ack(void)
-{
-	write_c0_compare(cpj);
-}
-
-__init void plat_time_init(void)
-{
-	unsigned int configPR;
-	unsigned int n;
-	unsigned int m;
-	unsigned int p;
-	unsigned int pow2p;
-
-	pnx8xxx_clockevent.cpumask = cpu_none_mask;
-	clockevents_register_device(&pnx8xxx_clockevent);
-	clocksource_register(&pnx_clocksource);
-
-	/* Timer 1 start */
-	configPR = read_c0_config7();
-	configPR &= ~0x00000008;
-	write_c0_config7(configPR);
-
-	/* Timer 2 start */
-	configPR = read_c0_config7();
-	configPR &= ~0x00000010;
-	write_c0_config7(configPR);
-
-	/* Timer 3 stop */
-	configPR = read_c0_config7();
-	configPR |= 0x00000020;
-	write_c0_config7(configPR);
-
-
-        /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */
-        /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1:  FIXME) */
-
-        n = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_N_MASK) >> 16;
-        m = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_M_MASK) >> 8;
-        p = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_P_MASK) >> 2;
-	pow2p = (1 << p);
-
-	db_assert(m != 0 && pow2p != 0);
-
-        /*
-	 * Compute the frequency as in the PNX8550 User Manual 1.0, p.186
-	 * (a.k.a. 8-10).  Divide by HZ for a timer offset that results in
-	 * HZ timer interrupts per second.
-	 */
-	mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
-	cpj = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
-	write_c0_count(0);
-	timer_ack();
-
-	/* Setup Timer 2 */
-	write_c0_count2(0);
-	write_c0_compare2(0xffffffff);
-
-	setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq);
-	setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
-}
diff --git a/arch/mips/pnx8550/jbs/Makefile b/arch/mips/pnx8550/jbs/Makefile
deleted file mode 100644
index c4dc3d5..0000000
--- a/arch/mips/pnx8550/jbs/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-
-# Makefile for the NXP JBS Board.
-
-obj-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/pnx8550/jbs/board_setup.c b/arch/mips/pnx8550/jbs/board_setup.c
deleted file mode 100644
index 57dd903..0000000
--- a/arch/mips/pnx8550/jbs/board_setup.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  JBS Specific board startup routines.
- *
- *  Copyright 2005, Embedded Alley Solutions, Inc
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-
-#include <glb.h>
-
-/* CP0 hazard avoidance. */
-#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
-				     "nop; nop; nop; nop; nop; nop;\n\t" \
-				     ".set reorder\n\t")
-
-void __init board_setup(void)
-{
-	unsigned long configpr;
-
-	configpr = read_c0_config7();
-	configpr |= (1<<19); /* enable tlb */
-	write_c0_config7(configpr);
-	BARRIER;
-}
diff --git a/arch/mips/pnx8550/jbs/init.c b/arch/mips/pnx8550/jbs/init.c
deleted file mode 100644
index d59b4a4..0000000
--- a/arch/mips/pnx8550/jbs/init.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *
- *  Copyright 2005 Embedded Alley Solutions, Inc
- *  source@embeddedalley.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-extern void  __init prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-
-const char *get_system_type(void)
-{
-	return "NXP PNX8550/JBS";
-}
-
-void __init prom_init(void)
-{
-	unsigned long memsize;
-
-	//memsize = 0x02800000; /* Trimedia uses memory above */
-	memsize = 0x08000000; /* Trimedia uses memory above */
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/pnx8550/jbs/irqmap.c b/arch/mips/pnx8550/jbs/irqmap.c
deleted file mode 100644
index 7fc89842..0000000
--- a/arch/mips/pnx8550/jbs/irqmap.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  NXP JBS board irqmap.
- *
- *  Copyright 2005 Embedded Alley Solutions, Inc
- *  source@embeddealley.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <int.h>
-
-char pnx8550_irq_tab[][5] __initdata = {
-	[8]	= { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
-	[9]	= { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
-	[17]	= { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
-};
diff --git a/arch/mips/pnx8550/stb810/Makefile b/arch/mips/pnx8550/stb810/Makefile
deleted file mode 100644
index cb4ff02..0000000
--- a/arch/mips/pnx8550/stb810/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-
-# Makefile for the NXP STB810 Board.
-
-obj-y := prom_init.o board_setup.o irqmap.o
diff --git a/arch/mips/pnx8550/stb810/board_setup.c b/arch/mips/pnx8550/stb810/board_setup.c
deleted file mode 100644
index af2a55e..0000000
--- a/arch/mips/pnx8550/stb810/board_setup.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- *  STB810 specific board startup routines.
- *
- *  Based on the arch/mips/nxp/pnx8550/jbs/board_setup.c
- *
- *  Author: MontaVista Software, Inc.
- *          source@mvista.com
- *
- *  Copyright 2005 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-
-#include <glb.h>
-
-void __init board_setup(void)
-{
-	unsigned long configpr;
-
-	configpr = read_c0_config7();
-	configpr |= (1<<19); /* enable tlb */
-	write_c0_config7(configpr);
-}
diff --git a/arch/mips/pnx8550/stb810/irqmap.c b/arch/mips/pnx8550/stb810/irqmap.c
deleted file mode 100644
index 8c03496..0000000
--- a/arch/mips/pnx8550/stb810/irqmap.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  NXP STB810 board irqmap.
- *
- *  Author: MontaVista Software, Inc.
- *          source@mvista.com
- *
- *  Copyright 2005 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- */
-
-#include <linux/init.h>
-#include <int.h>
-
-char pnx8550_irq_tab[][5] __initdata = {
-	[8]	= { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
-	[9]	= { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
-	[10]	= { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
-};
diff --git a/arch/mips/pnx8550/stb810/prom_init.c b/arch/mips/pnx8550/stb810/prom_init.c
deleted file mode 100644
index ca7f4ad..0000000
--- a/arch/mips/pnx8550/stb810/prom_init.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  STB810 specific prom routines
- *
- *  Author: MontaVista Software, Inc.
- *          source@mvista.com
- *
- *  Copyright 2005 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-extern void  __init prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-
-const char *get_system_type(void)
-{
-	return "NXP PNX8950/STB810";
-}
-
-void __init prom_init(void)
-{
-	unsigned long memsize;
-
-	prom_argc = (int) fw_arg0;
-	prom_argv = (char **) fw_arg1;
-	prom_envp = (char **) fw_arg2;
-
-	prom_init_cmdline();
-
-	memsize = 0x08000000; /* Trimedia uses memory above */
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/power/cpu.c b/arch/mips/power/cpu.c
index 26a6ef1..521e596 100644
--- a/arch/mips/power/cpu.c
+++ b/arch/mips/power/cpu.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2009 Lemote Inc.
  * Author: Hu Hongbing <huhb@lemote.com>
- *         Wu Zhangjin <wuzhangjin@gmail.com>
+ *	   Wu Zhangjin <wuzhangjin@gmail.com>
  */
 #include <asm/suspend.h>
 #include <asm/fpu.h>
diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S
index 61e2558..7e0277a 100644
--- a/arch/mips/power/hibernate.S
+++ b/arch/mips/power/hibernate.S
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2009 Lemote Inc.
  * Author: Hu Hongbing <huhb@lemote.com>
- *         Wu Zhangjin <wuzhangjin@gmail.com>
+ *	   Wu Zhangjin <wuzhangjin@gmail.com>
  */
 #include <asm/asm-offsets.h>
 #include <asm/regdef.h>
diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c
index 7773f3d9..2f539b4 100644
--- a/arch/mips/powertv/asic/asic-calliope.c
+++ b/arch/mips/powertv/asic/asic-calliope.c
@@ -17,10 +17,10 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  *
- * Author:       Ken Eppinett
- *               David Schleef <ds@schleef.org>
+ * Author:	 Ken Eppinett
+ *		 David Schleef <ds@schleef.org>
  *
- * Description:  Defines the platform resources for the SA settop.
+ * Description:	 Defines the platform resources for the SA settop.
  */
 
 #include <linux/init.h>
@@ -90,12 +90,12 @@
 	.usb2_stbus_mess_size = {.phys = CALLIOPE_ADDR(0x9BFF04)},
 	.usb2_stbus_chunk_size = {.phys = CALLIOPE_ADDR(0x9BFF08)},
 
-	.pcie_regs = {.phys = 0x000000},      	/* -doesn't exist- */
+	.pcie_regs = {.phys = 0x000000},	/* -doesn't exist- */
 	.tim_ch = {.phys = CALLIOPE_ADDR(0xA02C10)},
 	.tim_cl = {.phys = CALLIOPE_ADDR(0xA02C14)},
 	.gpio_dout = {.phys = CALLIOPE_ADDR(0xA02c20)},
 	.gpio_din = {.phys = CALLIOPE_ADDR(0xA02c24)},
 	.gpio_dir = {.phys = CALLIOPE_ADDR(0xA02c2C)},
 	.watchdog = {.phys = CALLIOPE_ADDR(0xA02c30)},
-	.front_panel = {.phys = 0x000000},    	/* -not used- */
+	.front_panel = {.phys = 0x000000},	/* -not used- */
 };
diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c
index da076db..7f8f342 100644
--- a/arch/mips/powertv/asic/asic-cronus.c
+++ b/arch/mips/powertv/asic/asic-cronus.c
@@ -17,10 +17,10 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  *
- * Author:       Ken Eppinett
- *               David Schleef <ds@schleef.org>
+ * Author:	 Ken Eppinett
+ *		 David Schleef <ds@schleef.org>
  *
- * Description:  Defines the platform resources for the SA settop.
+ * Description:	 Defines the platform resources for the SA settop.
  */
 
 #include <linux/init.h>
diff --git a/arch/mips/powertv/asic/asic-gaia.c b/arch/mips/powertv/asic/asic-gaia.c
index 47683b3..1265b49 100644
--- a/arch/mips/powertv/asic/asic-gaia.c
+++ b/arch/mips/powertv/asic/asic-gaia.c
@@ -17,7 +17,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  *
- * Author:       David VomLehn
+ * Author:	 David VomLehn
  */
 
 #include <linux/init.h>
diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c
index 6ff4b10f..14e7de1 100644
--- a/arch/mips/powertv/asic/asic-zeus.c
+++ b/arch/mips/powertv/asic/asic-zeus.c
@@ -17,10 +17,10 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  *
- * Author:       Ken Eppinett
- *               David Schleef <ds@schleef.org>
+ * Author:	 Ken Eppinett
+ *		 David Schleef <ds@schleef.org>
  *
- * Description:  Defines the platform resources for the SA settop.
+ * Description:	 Defines the platform resources for the SA settop.
  */
 
 #include <linux/init.h>
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
index bce1872..d38b095 100644
--- a/arch/mips/powertv/asic/asic_devices.c
+++ b/arch/mips/powertv/asic/asic_devices.c
@@ -1,6 +1,6 @@
 /*
  *
- * Description:  Defines the platform resources for Gaia-based settops.
+ * Description:	 Defines the platform resources for Gaia-based settops.
  *
  * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
  *
@@ -90,12 +90,12 @@
 
 /*
  * Allow override of bootloader-specified model
- * Returns zero on success, a negative errno value on failure.  This parameter
+ * Returns zero on success, a negative errno value on failure.	This parameter
  * allows overriding of the bootloader-specified model.
  */
 static char __initdata cmdline[COMMAND_LINE_SIZE];
 
-#define	FORCEFAMILY_PARAM	"forcefamily"
+#define FORCEFAMILY_PARAM	"forcefamily"
 
 /*
  * check_forcefamily - check for, and parse, forcefamily command line parameter
@@ -486,7 +486,7 @@
 		resource->start = phys_to_dma(pmemaddr - 0x80000000);
 		resource->end = resource->start + pmemlen - 1;
 
-		pr_info("persistent memory: start=0x%x  end=0x%x\n",
+		pr_info("persistent memory: start=0x%x	end=0x%x\n",
 			resource->start, resource->end);
 	}
 }
diff --git a/arch/mips/powertv/asic/asic_int.c b/arch/mips/powertv/asic/asic_int.c
index 99d82e1..f44cd92 100644
--- a/arch/mips/powertv/asic/asic_int.c
+++ b/arch/mips/powertv/asic/asic_int.c
@@ -2,7 +2,7 @@
  * Carsten Langgaard, carstenl@mips.com
  * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
  * Copyright (C) 2001 Ralf Baechle
- * Portions copyright (C) 2009  Cisco Systems, Inc.
+ * Portions copyright (C) 2009	Cisco Systems, Inc.
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -64,7 +64,7 @@
 
 	irq = get_int();
 	if (irq < 0)
-		return;  /* interrupt has already been cleared */
+		return;	 /* interrupt has already been cleared */
 
 	do_IRQ(irq);
 }
diff --git a/arch/mips/powertv/asic/irq_asic.c b/arch/mips/powertv/asic/irq_asic.c
index fa9ae95..9344902 100644
--- a/arch/mips/powertv/asic/irq_asic.c
+++ b/arch/mips/powertv/asic/irq_asic.c
@@ -5,8 +5,8 @@
  * Modified from arch/mips/kernel/irq-rm7000.c:
  * Copyright (C) 2003 Ralf Baechle
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/powertv/asic/prealloc-calliope.c b/arch/mips/powertv/asic/prealloc-calliope.c
index 3fc5d466..98dc516 100644
--- a/arch/mips/powertv/asic/prealloc-calliope.c
+++ b/arch/mips/powertv/asic/prealloc-calliope.c
@@ -17,8 +17,8 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  *
- * Author:       Ken Eppinett
- *               David Schleef <ds@schleef.org>
+ * Author:	 Ken Eppinett
+ *		 David Schleef <ds@schleef.org>
  */
 
 #include <linux/init.h>
@@ -153,7 +153,7 @@
 	 * End of Resource marker
 	 */
 	{
-		.flags  = 0,
+		.flags	= 0,
 	},
 };
 
@@ -260,7 +260,7 @@
 	 * End of Resource marker
 	 */
 	{
-		.flags  = 0,
+		.flags	= 0,
 	},
 };
 
@@ -380,6 +380,6 @@
 	 * End of Resource marker
 	 */
 	{
-		.flags  = 0,
+		.flags	= 0,
 	},
 };
diff --git a/arch/mips/powertv/asic/prealloc-cronus.c b/arch/mips/powertv/asic/prealloc-cronus.c
index c532b50..7c6ce75 100644
--- a/arch/mips/powertv/asic/prealloc-cronus.c
+++ b/arch/mips/powertv/asic/prealloc-cronus.c
@@ -17,8 +17,8 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  *
- * Author:       Ken Eppinett
- *               David Schleef <ds@schleef.org>
+ * Author:	 Ken Eppinett
+ *		 David Schleef <ds@schleef.org>
  */
 
 #include <linux/init.h>
@@ -78,7 +78,7 @@
 	 *
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
+	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
 	 */
@@ -185,7 +185,7 @@
 	 * End of Resource marker
 	 */
 	{
-		.flags  = 0,
+		.flags	= 0,
 	},
 };
 
@@ -241,7 +241,7 @@
 	 *
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
+	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
 	 */
@@ -335,6 +335,6 @@
 	 * End of Resource marker
 	 */
 	{
-		.flags  = 0,
+		.flags	= 0,
 	},
 };
diff --git a/arch/mips/powertv/asic/prealloc-cronuslite.c b/arch/mips/powertv/asic/prealloc-cronuslite.c
index b5537e4..a7937ba 100644
--- a/arch/mips/powertv/asic/prealloc-cronuslite.c
+++ b/arch/mips/powertv/asic/prealloc-cronuslite.c
@@ -17,8 +17,8 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  *
- * Author:       Ken Eppinett
- *               David Schleef <ds@schleef.org>
+ * Author:	 Ken Eppinett
+ *		 David Schleef <ds@schleef.org>
  */
 
 #include <linux/init.h>
@@ -65,7 +65,7 @@
 	 *
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
+	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
 	 */
@@ -169,6 +169,6 @@
 	 * End of Resource marker
 	 */
 	{
-		.flags  = 0,
+		.flags	= 0,
 	},
 };
diff --git a/arch/mips/powertv/asic/prealloc-gaia.c b/arch/mips/powertv/asic/prealloc-gaia.c
index 8ac8c7a..2303bbf 100644
--- a/arch/mips/powertv/asic/prealloc-gaia.c
+++ b/arch/mips/powertv/asic/prealloc-gaia.c
@@ -17,7 +17,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  *
- * Author:       David VomLehn
+ * Author:	 David VomLehn
  */
 
 #include <linux/init.h>
@@ -33,22 +33,22 @@
 	 *
 	 */
 	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x24000000,
-		.end    = 0x241FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_MEM,
+		.name	= "ST231aImage",	/* Delta-Mu 1 image and ram */
+		.start	= 0x24000000,
+		.end	= 0x241FFFFF,		/* 2MiB */
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start  = 0x24200000,
-		.end    = 0x24201FFF,
-		.flags  = IORESOURCE_MEM,
+		.name	= "ST231aMonitor",	/* 8KiB block ST231a monitor */
+		.start	= 0x24200000,
+		.end	= 0x24201FFF,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "MediaMemory1",
-		.start  = 0x24202000,
-		.end    = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_MEM,
+		.name	= "MediaMemory1",
+		.start	= 0x24202000,
+		.end	= 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags	= IORESOURCE_MEM,
 	},
 	/*
 	 *
@@ -56,22 +56,22 @@
 	 *
 	 */
 	{
-		.name   = "ST231bImage",	/* Delta-Mu 2 image and ram */
-		.start  = 0x60000000,
-		.end    = 0x601FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
+		.name	= "ST231bImage",	/* Delta-Mu 2 image and ram */
+		.start	= 0x60000000,
+		.end	= 0x601FFFFF,		/* 2MiB */
+		.flags	= IORESOURCE_IO,
 	},
 	{
-		.name   = "ST231bMonitor",	/* 8KiB block ST231b monitor */
-		.start  = 0x60200000,
-		.end    = 0x60201FFF,
-		.flags  = IORESOURCE_IO,
+		.name	= "ST231bMonitor",	/* 8KiB block ST231b monitor */
+		.start	= 0x60200000,
+		.end	= 0x60201FFF,
+		.flags	= IORESOURCE_IO,
 	},
 	{
-		.name   = "MediaMemory2",
-		.start  = 0x60202000,
-		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
+		.name	= "MediaMemory2",
+		.start	= 0x60202000,
+		.end	= 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -87,28 +87,28 @@
 	 *
 	 */
 	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
+		.name	= "DSP_Image_Buff",
+		.start	= 0x00000000,
+		.end	= 0x000FFFFF,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
+		.name	= "ADSC_CPU_PCM_Buff",
+		.start	= 0x00000000,
+		.end	= 0x00009FFF,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
+		.name	= "ADSC_AUX_Buff",
+		.start	= 0x00000000,
+		.end	= 0x00003FFF,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
+		.name	= "ADSC_Main_Buff",
+		.start	= 0x00000000,
+		.end	= 0x00003FFF,
+		.flags	= IORESOURCE_MEM,
 	},
 	/*
 	 *
@@ -119,16 +119,16 @@
 	 * Arbitrary Based Buffers:
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
+	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
 	 *
 	 */
 	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x63580000,
-		.end    = 0x64180000 - 1,  /* 12 MB total */
-		.flags  = IORESOURCE_IO,
+		.name	= "AVMEMPartition0",
+		.start	= 0x63580000,
+		.end	= 0x64180000 - 1,  /* 12 MB total */
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -141,10 +141,10 @@
 	 *
 	 */
 	{
-		.name   = "Docsis",
-		.start  = 0x62000000,
-		.end    = 0x62700000 - 1,	/* 7 MB total */
-		.flags  = IORESOURCE_IO,
+		.name	= "Docsis",
+		.start	= 0x62000000,
+		.end	= 0x62700000 - 1,	/* 7 MB total */
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -157,10 +157,10 @@
 	 *
 	 */
 	{
-		.name   = "GraphicsHeap",
-		.start  = 0x62700000,
-		.end    = 0x63500000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_IO,
+		.name	= "GraphicsHeap",
+		.start	= 0x62700000,
+		.end	= 0x63500000 - 1,	/* 14 MB total */
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -173,10 +173,10 @@
 	 *
 	 */
 	{
-		.name   = "MulticomSHM",
-		.start  = 0x26000000,
-		.end    = 0x26020000 - 1,
-		.flags  = IORESOURCE_MEM,
+		.name	= "MulticomSHM",
+		.start	= 0x26000000,
+		.end	= 0x26020000 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	/*
 	 *
@@ -189,10 +189,10 @@
 	 *
 	 */
 	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x00280000 - 1,
-		.flags  = IORESOURCE_MEM,
+		.name	= "BMM_Buffer",
+		.start	= 0x00000000,
+		.end	= 0x00280000 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	/*
 	 *
@@ -205,10 +205,10 @@
 	 *
 	 */
 	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,		/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
+		.name	= "DisplayBins0",
+		.start	= 0x00000000,
+		.end	= 0x00000FFF,		/* 4 KB total */
+		.flags	= IORESOURCE_MEM,
 	},
 	/*
 	 *
@@ -221,10 +221,10 @@
 	 *
 	 */
 	{
-		.name   = "DisplayBins1",
-		.start  = 0x64AD4000,
-		.end    = 0x64AD5000 - 1,  /* 4 KB total */
-		.flags  = IORESOURCE_IO,
+		.name	= "DisplayBins1",
+		.start	= 0x64AD4000,
+		.end	= 0x64AD5000 - 1,  /* 4 KB total */
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -237,11 +237,11 @@
 	 *
 	 */
 	{
-		.name   = "ITFS",
-		.start  = 0x64180000,
+		.name	= "ITFS",
+		.start	= 0x64180000,
 		/* 815,104 bytes each for 2 ITFS partitions. */
-		.end    = 0x6430DFFF,
-		.flags  = IORESOURCE_IO,
+		.end	= 0x6430DFFF,
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -254,17 +254,17 @@
 	 *
 	 */
 	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x6430E000,
+		.name	= "AvfsDmaMem",
+		.start	= 0x6430E000,
 		/* (945K * 8) = (128K *3) 5 playbacks / 3 server */
-		.end    = 0x64AD0000 - 1,
-		.flags  = IORESOURCE_IO,
+		.end	= 0x64AD0000 - 1,
+		.flags	= IORESOURCE_IO,
 	},
 	{
-		.name   = "AvfsFileSys",
-		.start  = 0x64AD0000,
-		.end    = 0x64AD1000 - 1,  /* 4K */
-		.flags  = IORESOURCE_IO,
+		.name	= "AvfsFileSys",
+		.start	= 0x64AD0000,
+		.end	= 0x64AD1000 - 1,  /* 4K */
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -277,10 +277,10 @@
 	 *
 	 */
 	{
-		.name   = "SmartCardInfo",
-		.start  = 0x64AD1000,
-		.end    = 0x64AD3800 - 1,
-		.flags  = IORESOURCE_IO,
+		.name	= "SmartCardInfo",
+		.start	= 0x64AD1000,
+		.end	= 0x64AD3800 - 1,
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -290,22 +290,22 @@
 	 *	   NP IPC - must be video bank 2
 	 */
 	{
-		.name   = "NP_Reset_Vector",
-		.start  = 0x27c00000,
-		.end    = 0x27c01000 - 1,
-		.flags  = IORESOURCE_MEM,
+		.name	= "NP_Reset_Vector",
+		.start	= 0x27c00000,
+		.end	= 0x27c01000 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "NP_Image",
-		.start  = 0x27020000,
-		.end    = 0x27060000 - 1,
-		.flags  = IORESOURCE_MEM,
+		.name	= "NP_Image",
+		.start	= 0x27020000,
+		.end	= 0x27060000 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "NP_IPC",
-		.start  = 0x63500000,
-		.end    = 0x63580000 - 1,
-		.flags  = IORESOURCE_IO,
+		.name	= "NP_IPC",
+		.start	= 0x63500000,
+		.end	= 0x63580000 - 1,
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 * Add other resources here
@@ -323,22 +323,22 @@
 	 *
 	 */
 	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x24000000,
-		.end    = 0x241FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_MEM,
+		.name	= "ST231aImage",	/* Delta-Mu 1 image and ram */
+		.start	= 0x24000000,
+		.end	= 0x241FFFFF,		/* 2MiB */
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start  = 0x24200000,
-		.end    = 0x24201FFF,
-		.flags  = IORESOURCE_MEM,
+		.name	= "ST231aMonitor",	/* 8KiB block ST231a monitor */
+		.start	= 0x24200000,
+		.end	= 0x24201FFF,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "MediaMemory1",
-		.start  = 0x24202000,
-		.end    = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_MEM,
+		.name	= "MediaMemory1",
+		.start	= 0x24202000,
+		.end	= 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags	= IORESOURCE_MEM,
 	},
 	/*
 	 *
@@ -346,22 +346,22 @@
 	 *
 	 */
 	{
-		.name   = "ST231bImage",	/* Delta-Mu 2 image and ram */
-		.start  = 0x60000000,
-		.end    = 0x601FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
+		.name	= "ST231bImage",	/* Delta-Mu 2 image and ram */
+		.start	= 0x60000000,
+		.end	= 0x601FFFFF,		/* 2MiB */
+		.flags	= IORESOURCE_IO,
 	},
 	{
-		.name   = "ST231bMonitor",	/* 8KiB block ST231b monitor */
-		.start  = 0x60200000,
-		.end    = 0x60201FFF,
-		.flags  = IORESOURCE_IO,
+		.name	= "ST231bMonitor",	/* 8KiB block ST231b monitor */
+		.start	= 0x60200000,
+		.end	= 0x60201FFF,
+		.flags	= IORESOURCE_IO,
 	},
 	{
-		.name   = "MediaMemory2",
-		.start  = 0x60202000,
-		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
+		.name	= "MediaMemory2",
+		.start	= 0x60202000,
+		.end	= 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -377,28 +377,28 @@
 	 *
 	 */
 	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
+		.name	= "DSP_Image_Buff",
+		.start	= 0x00000000,
+		.end	= 0x000FFFFF,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
+		.name	= "ADSC_CPU_PCM_Buff",
+		.start	= 0x00000000,
+		.end	= 0x00009FFF,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
+		.name	= "ADSC_AUX_Buff",
+		.start	= 0x00000000,
+		.end	= 0x00003FFF,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
+		.name	= "ADSC_Main_Buff",
+		.start	= 0x00000000,
+		.end	= 0x00003FFF,
+		.flags	= IORESOURCE_MEM,
 	},
 	/*
 	 *
@@ -409,16 +409,16 @@
 	 * Arbitrary Based Buffers:
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
+	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
 	 *
 	 */
 	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x63580000,
-		.end    = 0x64180000 - 1,  /* 12 MB total */
-		.flags  = IORESOURCE_IO,
+		.name	= "AVMEMPartition0",
+		.start	= 0x63580000,
+		.end	= 0x64180000 - 1,  /* 12 MB total */
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -431,10 +431,10 @@
 	 *
 	 */
 	{
-		.name   = "Docsis",
-		.start  = 0x62000000,
-		.end    = 0x62700000 - 1,	/* 7 MB total */
-		.flags  = IORESOURCE_IO,
+		.name	= "Docsis",
+		.start	= 0x62000000,
+		.end	= 0x62700000 - 1,	/* 7 MB total */
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -447,10 +447,10 @@
 	 *
 	 */
 	{
-		.name   = "GraphicsHeap",
-		.start  = 0x62700000,
-		.end    = 0x63500000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_IO,
+		.name	= "GraphicsHeap",
+		.start	= 0x62700000,
+		.end	= 0x63500000 - 1,	/* 14 MB total */
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -463,10 +463,10 @@
 	 *
 	 */
 	{
-		.name   = "MulticomSHM",
-		.start  = 0x26000000,
-		.end    = 0x26020000 - 1,
-		.flags  = IORESOURCE_MEM,
+		.name	= "MulticomSHM",
+		.start	= 0x26000000,
+		.end	= 0x26020000 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	/*
 	 *
@@ -479,10 +479,10 @@
 	 *
 	 */
 	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x000AA000 - 1,
-		.flags  = IORESOURCE_MEM,
+		.name	= "BMM_Buffer",
+		.start	= 0x00000000,
+		.end	= 0x000AA000 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	/*
 	 *
@@ -495,10 +495,10 @@
 	 *
 	 */
 	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,		/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
+		.name	= "DisplayBins0",
+		.start	= 0x00000000,
+		.end	= 0x00000FFF,		/* 4 KB total */
+		.flags	= IORESOURCE_MEM,
 	},
 	/*
 	 *
@@ -511,10 +511,10 @@
 	 *
 	 */
 	{
-		.name   = "DisplayBins1",
-		.start  = 0x64AD4000,
-		.end    = 0x64AD5000 - 1,  /* 4 KB total */
-		.flags  = IORESOURCE_IO,
+		.name	= "DisplayBins1",
+		.start	= 0x64AD4000,
+		.end	= 0x64AD5000 - 1,  /* 4 KB total */
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -523,10 +523,10 @@
 	 *
 	 */
 	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x6430E000,
-		.end    = 0x645D2C00 - 1,  /* 945K * 3 for playback */
-		.flags  = IORESOURCE_IO,
+		.name	= "AvfsDmaMem",
+		.start	= 0x6430E000,
+		.end	= 0x645D2C00 - 1,  /* 945K * 3 for playback */
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -539,10 +539,10 @@
 	 *
 	 */
 	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
+		.name	= "DiagPersistentMemory",
+		.start	= 0x00000000,
+		.end	= 0x10000 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	/*
 	 *
@@ -555,10 +555,10 @@
 	 *
 	 */
 	{
-		.name   = "SmartCardInfo",
-		.start  = 0x64AD1000,
-		.end    = 0x64AD3800 - 1,
-		.flags  = IORESOURCE_IO,
+		.name	= "SmartCardInfo",
+		.start	= 0x64AD1000,
+		.end	= 0x64AD3800 - 1,
+		.flags	= IORESOURCE_IO,
 	},
 	/*
 	 *
@@ -568,22 +568,22 @@
 	 *	   NP IPC - must be video bank 2
 	 */
 	{
-		.name   = "NP_Reset_Vector",
-		.start  = 0x27c00000,
-		.end    = 0x27c01000 - 1,
-		.flags  = IORESOURCE_MEM,
+		.name	= "NP_Reset_Vector",
+		.start	= 0x27c00000,
+		.end	= 0x27c01000 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "NP_Image",
-		.start  = 0x27020000,
-		.end    = 0x27060000 - 1,
-		.flags  = IORESOURCE_MEM,
+		.name	= "NP_Image",
+		.start	= 0x27020000,
+		.end	= 0x27060000 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name   = "NP_IPC",
-		.start  = 0x63500000,
-		.end    = 0x63580000 - 1,
-		.flags  = IORESOURCE_IO,
+		.name	= "NP_IPC",
+		.start	= 0x63500000,
+		.end	= 0x63580000 - 1,
+		.flags	= IORESOURCE_IO,
 	},
 	{ },
 };
diff --git a/arch/mips/powertv/asic/prealloc-zeus.c b/arch/mips/powertv/asic/prealloc-zeus.c
index 96480a2..6e76f09 100644
--- a/arch/mips/powertv/asic/prealloc-zeus.c
+++ b/arch/mips/powertv/asic/prealloc-zeus.c
@@ -17,8 +17,8 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  *
- * Author:       Ken Eppinett
- *               David Schleef <ds@schleef.org>
+ * Author:	 Ken Eppinett
+ *		 David Schleef <ds@schleef.org>
  */
 
 #include <linux/init.h>
@@ -78,7 +78,7 @@
 	 *
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
+	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
 	 */
@@ -175,7 +175,7 @@
 	 * End of Resource marker
 	 */
 	{
-		.flags  = 0,
+		.flags	= 0,
 	},
 };
 
@@ -299,6 +299,6 @@
 	 * End of Resource marker
 	 */
 	{
-		.flags  = 0,
+		.flags	= 0,
 	},
 };
diff --git a/arch/mips/powertv/init.c b/arch/mips/powertv/init.c
index c697935..5bd9d8f 100644
--- a/arch/mips/powertv/init.c
+++ b/arch/mips/powertv/init.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 1999, 2000, 2004, 2005  MIPS Technologies, Inc.
+ * Copyright (C) 1999, 2000, 2004, 2005	 MIPS Technologies, Inc.
  *	All rights reserved.
  *	Authors: Carsten Langgaard <carstenl@mips.com>
  *		 Maciej W. Rozycki <macro@mips.com>
diff --git a/arch/mips/powertv/ioremap.c b/arch/mips/powertv/ioremap.c
index a77c6f6..d060478 100644
--- a/arch/mips/powertv/ioremap.c
+++ b/arch/mips/powertv/ioremap.c
@@ -19,9 +19,9 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  *
- * Author:       David VomLehn <dvomlehn@cisco.com>
+ * Author:	 David VomLehn <dvomlehn@cisco.com>
  *
- * Description:  Defines the platform resources for the SA settop.
+ * Description:	 Defines the platform resources for the SA settop.
  *
  * NOTE: The bootloader allocates persistent memory at an address which is
  * 16 MiB below the end of the highest address in KSEG0. All fixed
diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c
index fb3d296..6e5f1bd 100644
--- a/arch/mips/powertv/memory.c
+++ b/arch/mips/powertv/memory.c
@@ -60,7 +60,7 @@
  * struct low_mem_reserved - Items in low memory that are reserved
  * @start:	Physical address of item
  * @size:	Size, in bytes, of this item
- * @is_aliased:	True if this is RAM aliased from another location. If false,
+ * @is_aliased: True if this is RAM aliased from another location. If false,
  *		it is something other than aliased RAM and the RAM in the
  *		unaliased address is still visible outside of low memory.
  */
diff --git a/arch/mips/powertv/powertv-usb.c b/arch/mips/powertv/powertv-usb.c
index b0e2afa..d845eac 100644
--- a/arch/mips/powertv/powertv-usb.c
+++ b/arch/mips/powertv/powertv-usb.c
@@ -1,7 +1,7 @@
 /*
  *				powertv-usb.c
  *
- * Description:  ASIC-specific USB device setup and shutdown
+ * Description:	 ASIC-specific USB device setup and shutdown
  *
  * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
  * Copyright (C) 2009 Cisco Systems, Inc.
@@ -20,8 +20,8 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  *
- * Author:       Ken Eppinett
- *               David Schleef <ds@schleef.org>
+ * Author:	 Ken Eppinett
+ *		 David Schleef <ds@schleef.org>
  *
  * NOTE: The bootloader allocates persistent memory at an address which is
  * 16 MiB below the end of the highest address in KSEG0. All fixed
@@ -70,15 +70,15 @@
 #define MCC2_GMII_RX2_CLOCK_SELECT	(1 << 16)
 
 #define ETHER_CLK_CONFIG	(MCC2_GMII_GCLK_TO_PAD |	\
-				 MCC2_ETHER125_0_CLOCK_SELECT |	\
+				 MCC2_ETHER125_0_CLOCK_SELECT | \
 				 MCC2_RMII_0_CLOCK_SELECT |	\
 				 MCC2_GMII_TX0_CLOCK_SELECT |	\
 				 MCC2_GMII_RX0_CLOCK_SELECT |	\
-				 MCC2_ETHER125_1_CLOCK_SELECT |	\
+				 MCC2_ETHER125_1_CLOCK_SELECT | \
 				 MCC2_RMII_1_CLOCK_SELECT |	\
 				 MCC2_GMII_TX1_CLOCK_SELECT |	\
 				 MCC2_GMII_RX1_CLOCK_SELECT |	\
-				 MCC2_ETHER125_2_CLOCK_SELECT |	\
+				 MCC2_ETHER125_2_CLOCK_SELECT | \
 				 MCC2_RMII_2_CLOCK_SELECT |	\
 				 MCC2_GMII_TX2_CLOCK_SELECT |	\
 				 MCC2_GMII_RX2_CLOCK_SELECT)
@@ -98,9 +98,9 @@
 
 #define QAM_FS_DISABLE_DIVIDE_BY_3		(1 << 5)
 #define QAM_FS_ENABLE_PROGRAM			(1 << 4)
-#define	QAM_FS_ENABLE_OUTPUT			(1 << 3)
-#define	QAM_FS_SELECT_TEST_BYPASS		(1 << 2)
-#define	QAM_FS_DISABLE_DIGITAL_STANDBY		(1 << 1)
+#define QAM_FS_ENABLE_OUTPUT			(1 << 3)
+#define QAM_FS_SELECT_TEST_BYPASS		(1 << 2)
+#define QAM_FS_DISABLE_DIGITAL_STANDBY		(1 << 1)
 #define QAM_FS_CHOOSE_FS			(1 << 0)
 
 /* Definitions for fs432x4a_ctl register */
@@ -142,14 +142,14 @@
 static struct resource ehci_resources[] = {
 	{
 		.parent = &asic_resource,
-		.start  = 0,
-		.end    = 0xff,
-		.flags  = IORESOURCE_MEM,
+		.start	= 0,
+		.end	= 0xff,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start  = irq_usbehci,
-		.end    = irq_usbehci,
-		.flags  = IORESOURCE_IRQ,
+		.start	= irq_usbehci,
+		.end	= irq_usbehci,
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -169,14 +169,14 @@
 static struct resource ohci_resources[] = {
 	{
 		.parent = &asic_resource,
-		.start  = 0,
-		.end    = 0xff,
-		.flags  = IORESOURCE_MEM,
+		.start	= 0,
+		.end	= 0xff,
+		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start  = irq_usbohci,
-		.end    = irq_usbohci,
-		.flags  = IORESOURCE_IRQ,
+		.start	= irq_usbohci,
+		.end	= irq_usbohci,
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -207,9 +207,9 @@
  *
  * QAM frequency selection code, which affects the frequency at which USB
  * runs. The frequency is calculated as:
- *                             2^15 * ndiv * Fin
+ *			       2^15 * ndiv * Fin
  * Fout = ------------------------------------------------------------
- *        (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32)))
+ *	  (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32)))
  * where:
  * Fin		54 MHz
  * ndiv		QAM_FS_NSDIV_54MHZ ? 8 : 16
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
new file mode 100644
index 0000000..a0b0197
--- /dev/null
+++ b/arch/mips/ralink/Kconfig
@@ -0,0 +1,32 @@
+if RALINK
+
+choice
+	prompt "Ralink SoC selection"
+	default SOC_RT305X
+	help
+	  Select Ralink MIPS SoC type.
+
+	config SOC_RT305X
+		bool "RT305x"
+		select USB_ARCH_HAS_HCD
+		select USB_ARCH_HAS_OHCI
+		select USB_ARCH_HAS_EHCI
+
+endchoice
+
+choice
+	prompt "Devicetree selection"
+	default DTB_RT_NONE
+	help
+	  Select the devicetree.
+
+	config DTB_RT_NONE
+		bool "None"
+
+	config DTB_RT305X_EVAL
+		bool "RT305x eval kit"
+		depends on SOC_RT305X
+
+endchoice
+
+endif
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
new file mode 100644
index 0000000..939757f
--- /dev/null
+++ b/arch/mips/ralink/Makefile
@@ -0,0 +1,15 @@
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.#
+# Makefile for the Ralink common stuff
+#
+# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+# Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+
+obj-y := prom.o of.o reset.o clk.o irq.o
+
+obj-$(CONFIG_SOC_RT305X) += rt305x.o
+
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-y += dts/
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
new file mode 100644
index 0000000..6babd65
--- /dev/null
+++ b/arch/mips/ralink/Platform
@@ -0,0 +1,10 @@
+#
+# Ralink SoC common stuff
+#
+core-$(CONFIG_RALINK)		+= arch/mips/ralink/
+cflags-$(CONFIG_RALINK)		+= -I$(srctree)/arch/mips/include/asm/mach-ralink
+
+#
+# Ralink RT305x
+#
+load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
new file mode 100644
index 0000000..8dfa22f
--- /dev/null
+++ b/arch/mips/ralink/clk.c
@@ -0,0 +1,72 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+
+#include <asm/time.h>
+
+#include "common.h"
+
+struct clk {
+	struct clk_lookup cl;
+	unsigned long rate;
+};
+
+void ralink_clk_add(const char *dev, unsigned long rate)
+{
+	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+	if (!clk)
+		panic("failed to add clock\n");
+
+	clk->cl.dev_id = dev;
+	clk->cl.clk = clk;
+
+	clk->rate = rate;
+
+	clkdev_add(&clk->cl);
+}
+
+/*
+ * Linux clock API
+ */
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL_GPL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL_GPL(clk_get_rate);
+
+void __init plat_time_init(void)
+{
+	struct clk *clk;
+
+	ralink_of_remap();
+
+	ralink_clk_init();
+	clk = clk_get_sys("cpu", NULL);
+	if (IS_ERR(clk))
+		panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
+	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
+	mips_hpt_frequency = clk_get_rate(clk) / 2;
+	clk_put(clk);
+}
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
new file mode 100644
index 0000000..3009903
--- /dev/null
+++ b/arch/mips/ralink/common.h
@@ -0,0 +1,44 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _RALINK_COMMON_H__
+#define _RALINK_COMMON_H__
+
+#define RAMIPS_SYS_TYPE_LEN	32
+
+struct ralink_pinmux_grp {
+	const char *name;
+	u32 mask;
+	int gpio_first;
+	int gpio_last;
+};
+
+struct ralink_pinmux {
+	struct ralink_pinmux_grp *mode;
+	struct ralink_pinmux_grp *uart;
+	int uart_shift;
+	void (*wdt_reset)(void);
+};
+extern struct ralink_pinmux gpio_pinmux;
+
+struct ralink_soc_info {
+	unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
+	unsigned char *compatible;
+};
+extern struct ralink_soc_info soc_info;
+
+extern void ralink_of_remap(void);
+
+extern void ralink_clk_init(void);
+extern void ralink_clk_add(const char *dev, unsigned long rate);
+
+extern void prom_soc_init(struct ralink_soc_info *soc_info);
+
+__iomem void *plat_of_remap_node(const char *node);
+
+#endif /* _RALINK_COMMON_H__ */
diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
new file mode 100644
index 0000000..1a69fb3
--- /dev/null
+++ b/arch/mips/ralink/dts/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
new file mode 100644
index 0000000..069d066
--- /dev/null
+++ b/arch/mips/ralink/dts/rt3050.dtsi
@@ -0,0 +1,106 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600 init=/init";
+	};
+
+	cpuintc: cpuintc@0 {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	palmbus@10000000 {
+		compatible = "palmbus";
+		reg = <0x10000000 0x200000>;
+                ranges = <0x0 0x10000000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc@0 {
+			compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc";
+			reg = <0x0 0x100>;
+		};
+
+		timer@100 {
+			compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
+			reg = <0x100 0x100>;
+		};
+
+		intc: intc@200 {
+			compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		memc@300 {
+			compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
+			reg = <0x300 0x100>;
+		};
+
+		gpio0: gpio@600 {
+			compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+			reg = <0x600 0x34>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ralink,ngpio = <24>;
+			ralink,regs = [ 00 04 08 0c
+					20 24 28 2c
+					30 34 ];
+		};
+
+		gpio1: gpio@638 {
+			compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+			reg = <0x638 0x24>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ralink,ngpio = <16>;
+			ralink,regs = [ 00 04 08 0c
+					10 14 18 1c
+					20 24 ];
+		};
+
+		gpio2: gpio@660 {
+			compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+			reg = <0x660 0x24>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ralink,ngpio = <12>;
+			ralink,regs = [ 00 04 08 0c
+					10 14 18 1c
+					20 24 ];
+		};
+
+		uartlite@c00 {
+			compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0xc00 0x100>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+
+			reg-shift = <2>;
+		};
+	};
+};
diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
new file mode 100644
index 0000000..148a590b
--- /dev/null
+++ b/arch/mips/ralink/dts/rt3052_eval.dts
@@ -0,0 +1,52 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
+	model = "Ralink RT3052 evaluation board";
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmmux = "uartlite", "spi";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <0>;
+		};
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x800000>;
+
+		bank-width = <2>;
+		device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+		partition@30000 {
+			label = "uboot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "calibration";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+		partition@50000 {
+			label = "linux";
+			reg = <0x50000 0x7b0000>;
+		};
+	};
+};
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
new file mode 100644
index 0000000..c4ae47e
--- /dev/null
+++ b/arch/mips/ralink/early_printk.c
@@ -0,0 +1,44 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/serial_reg.h>
+
+#include <asm/addrspace.h>
+
+#define EARLY_UART_BASE         0x10000c00
+
+#define UART_REG_RX             0x00
+#define UART_REG_TX             0x04
+#define UART_REG_IER            0x08
+#define UART_REG_IIR            0x0c
+#define UART_REG_FCR            0x10
+#define UART_REG_LCR            0x14
+#define UART_REG_MCR            0x18
+#define UART_REG_LSR            0x1c
+
+static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
+
+static inline void uart_w32(u32 val, unsigned reg)
+{
+	__raw_writel(val, uart_membase + reg);
+}
+
+static inline u32 uart_r32(unsigned reg)
+{
+	return __raw_readl(uart_membase + reg);
+}
+
+void prom_putchar(unsigned char ch)
+{
+	while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
+		;
+	uart_w32(ch, UART_REG_TX);
+	while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
+		;
+}
diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
new file mode 100644
index 0000000..6d054c5
--- /dev/null
+++ b/arch/mips/ralink/irq.c
@@ -0,0 +1,180 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+
+#include "common.h"
+
+/* INTC register offsets */
+#define INTC_REG_STATUS0	0x00
+#define INTC_REG_STATUS1	0x04
+#define INTC_REG_TYPE		0x20
+#define INTC_REG_RAW_STATUS	0x30
+#define INTC_REG_ENABLE		0x34
+#define INTC_REG_DISABLE	0x38
+
+#define INTC_INT_GLOBAL		BIT(31)
+
+#define RALINK_CPU_IRQ_INTC	(MIPS_CPU_IRQ_BASE + 2)
+#define RALINK_CPU_IRQ_FE	(MIPS_CPU_IRQ_BASE + 5)
+#define RALINK_CPU_IRQ_WIFI	(MIPS_CPU_IRQ_BASE + 6)
+#define RALINK_CPU_IRQ_COUNTER	(MIPS_CPU_IRQ_BASE + 7)
+
+/* we have a cascade of 8 irqs */
+#define RALINK_INTC_IRQ_BASE	8
+
+/* we have 32 SoC irqs */
+#define RALINK_INTC_IRQ_COUNT	32
+
+#define RALINK_INTC_IRQ_PERFC   (RALINK_INTC_IRQ_BASE + 9)
+
+static void __iomem *rt_intc_membase;
+
+static inline void rt_intc_w32(u32 val, unsigned reg)
+{
+	__raw_writel(val, rt_intc_membase + reg);
+}
+
+static inline u32 rt_intc_r32(unsigned reg)
+{
+	return __raw_readl(rt_intc_membase + reg);
+}
+
+static void ralink_intc_irq_unmask(struct irq_data *d)
+{
+	rt_intc_w32(BIT(d->hwirq), INTC_REG_ENABLE);
+}
+
+static void ralink_intc_irq_mask(struct irq_data *d)
+{
+	rt_intc_w32(BIT(d->hwirq), INTC_REG_DISABLE);
+}
+
+static struct irq_chip ralink_intc_irq_chip = {
+	.name		= "INTC",
+	.irq_unmask	= ralink_intc_irq_unmask,
+	.irq_mask	= ralink_intc_irq_mask,
+	.irq_mask_ack	= ralink_intc_irq_mask,
+};
+
+unsigned int __cpuinit get_c0_compare_int(void)
+{
+	return CP0_LEGACY_COMPARE_IRQ;
+}
+
+static void ralink_intc_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	u32 pending = rt_intc_r32(INTC_REG_STATUS0);
+
+	if (pending) {
+		struct irq_domain *domain = irq_get_handler_data(irq);
+		generic_handle_irq(irq_find_mapping(domain, __ffs(pending)));
+	} else {
+		spurious_interrupt();
+	}
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned long pending;
+
+	pending = read_c0_status() & read_c0_cause() & ST0_IM;
+
+	if (pending & STATUSF_IP7)
+		do_IRQ(RALINK_CPU_IRQ_COUNTER);
+
+	else if (pending & STATUSF_IP5)
+		do_IRQ(RALINK_CPU_IRQ_FE);
+
+	else if (pending & STATUSF_IP6)
+		do_IRQ(RALINK_CPU_IRQ_WIFI);
+
+	else if (pending & STATUSF_IP2)
+		do_IRQ(RALINK_CPU_IRQ_INTC);
+
+	else
+		spurious_interrupt();
+}
+
+static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &ralink_intc_irq_chip, handle_level_irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops irq_domain_ops = {
+	.xlate = irq_domain_xlate_onecell,
+	.map = intc_map,
+};
+
+static int __init intc_of_init(struct device_node *node,
+			       struct device_node *parent)
+{
+	struct resource res;
+	struct irq_domain *domain;
+	int irq;
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (!irq)
+		panic("Failed to get INTC IRQ");
+
+	if (of_address_to_resource(node, 0, &res))
+		panic("Failed to get intc memory range");
+
+	if (request_mem_region(res.start, resource_size(&res),
+				res.name) < 0)
+		pr_err("Failed to request intc memory");
+
+	rt_intc_membase = ioremap_nocache(res.start,
+					resource_size(&res));
+	if (!rt_intc_membase)
+		panic("Failed to remap intc memory");
+
+	/* disable all interrupts */
+	rt_intc_w32(~0, INTC_REG_DISABLE);
+
+	/* route all INTC interrupts to MIPS HW0 interrupt */
+	rt_intc_w32(0, INTC_REG_TYPE);
+
+	domain = irq_domain_add_legacy(node, RALINK_INTC_IRQ_COUNT,
+			RALINK_INTC_IRQ_BASE, 0, &irq_domain_ops, NULL);
+	if (!domain)
+		panic("Failed to add irqdomain");
+
+	rt_intc_w32(INTC_INT_GLOBAL, INTC_REG_ENABLE);
+
+	irq_set_chained_handler(irq, ralink_intc_irq_handler);
+	irq_set_handler_data(irq, domain);
+
+	cp0_perfcount_irq = irq_create_mapping(domain, 9);
+
+	return 0;
+}
+
+static struct of_device_id __initdata of_irq_ids[] = {
+	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
+	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
+	{},
+};
+
+void __init arch_init_irq(void)
+{
+	of_irq_init(of_irq_ids);
+}
+
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
new file mode 100644
index 0000000..4165e707
--- /dev/null
+++ b/arch/mips/ralink/of.c
@@ -0,0 +1,107 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/of_fdt.h>
+#include <linux/kernel.h>
+#include <linux/bootmem.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+#include <asm/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include "common.h"
+
+__iomem void *rt_sysc_membase;
+__iomem void *rt_memc_membase;
+
+extern struct boot_param_header __dtb_start;
+
+__iomem void *plat_of_remap_node(const char *node)
+{
+	struct resource res;
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, node);
+	if (!np)
+		panic("Failed to find %s node", node);
+
+	if (of_address_to_resource(np, 0, &res))
+		panic("Failed to get resource for %s", node);
+
+	if ((request_mem_region(res.start,
+				resource_size(&res),
+				res.name) < 0))
+		panic("Failed to request resources for %s", node);
+
+	return ioremap_nocache(res.start, resource_size(&res));
+}
+
+void __init device_tree_init(void)
+{
+	unsigned long base, size;
+	void *fdt_copy;
+
+	if (!initial_boot_params)
+		return;
+
+	base = virt_to_phys((void *)initial_boot_params);
+	size = be32_to_cpu(initial_boot_params->totalsize);
+
+	/* Before we do anything, lets reserve the dt blob */
+	reserve_bootmem(base, size, BOOTMEM_DEFAULT);
+
+	/* The strings in the flattened tree are referenced directly by the
+	 * device tree, so copy the flattened device tree from init memory
+	 * to regular memory.
+	 */
+	fdt_copy = alloc_bootmem(size);
+	memcpy(fdt_copy, initial_boot_params, size);
+	initial_boot_params = fdt_copy;
+
+	unflatten_device_tree();
+
+	/* free the space reserved for the dt blob */
+	free_bootmem(base, size);
+}
+
+void __init plat_mem_setup(void)
+{
+	set_io_port_base(KSEG1);
+
+	/*
+	 * Load the builtin devicetree. This causes the chosen node to be
+	 * parsed resulting in our memory appearing
+	 */
+	__dt_setup_arch(&__dtb_start);
+}
+
+static int __init plat_of_setup(void)
+{
+	static struct of_device_id of_ids[3];
+	int len = sizeof(of_ids[0].compatible);
+
+	if (!of_have_populated_dt())
+		panic("device tree not present");
+
+	strncpy(of_ids[0].compatible, soc_info.compatible, len);
+	strncpy(of_ids[1].compatible, "palmbus", len);
+
+	if (of_platform_populate(NULL, of_ids, NULL, NULL))
+		panic("failed to populate DT\n");
+
+	return 0;
+}
+
+arch_initcall(plat_of_setup);
diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c
new file mode 100644
index 0000000..9c64f02
--- /dev/null
+++ b/arch/mips/ralink/prom.c
@@ -0,0 +1,69 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com>
+ *  Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/string.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include "common.h"
+
+struct ralink_soc_info soc_info;
+
+const char *get_system_type(void)
+{
+	return soc_info.sys_type;
+}
+
+static __init void prom_init_cmdline(int argc, char **argv)
+{
+	int i;
+
+	pr_debug("prom: fw_arg0=%08x fw_arg1=%08x fw_arg2=%08x fw_arg3=%08x\n",
+	       (unsigned int)fw_arg0, (unsigned int)fw_arg1,
+	       (unsigned int)fw_arg2, (unsigned int)fw_arg3);
+
+	argc = fw_arg0;
+	argv = (char **) KSEG1ADDR(fw_arg1);
+
+	if (!argv) {
+		pr_debug("argv=%p is invalid, skipping\n",
+		       argv);
+		return;
+	}
+
+	for (i = 0; i < argc; i++) {
+		char *p = (char *) KSEG1ADDR(argv[i]);
+
+		if (CPHYSADDR(p) && *p) {
+			pr_debug("argv[%d]: %s\n", i, p);
+			strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
+			strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
+		}
+	}
+}
+
+void __init prom_init(void)
+{
+	int argc;
+	char **argv;
+
+	prom_soc_init(&soc_info);
+
+	pr_info("SoC Type: %s\n", get_system_type());
+
+	prom_init_cmdline(argc, argv);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
new file mode 100644
index 0000000..22120e5
--- /dev/null
+++ b/arch/mips/ralink/reset.c
@@ -0,0 +1,44 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/pm.h>
+#include <linux/io.h>
+
+#include <asm/reboot.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+/* Reset Control */
+#define SYSC_REG_RESET_CTRL     0x034
+#define RSTCTL_RESET_SYSTEM     BIT(0)
+
+static void ralink_restart(char *command)
+{
+	local_irq_disable();
+	rt_sysc_w32(RSTCTL_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
+	unreachable();
+}
+
+static void ralink_halt(void)
+{
+	local_irq_disable();
+	unreachable();
+}
+
+static int __init mips_reboot_setup(void)
+{
+	_machine_restart = ralink_restart;
+	_machine_halt = ralink_halt;
+	pm_power_off = ralink_halt;
+
+	return 0;
+}
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
new file mode 100644
index 0000000..0a4bbdc
--- /dev/null
+++ b/arch/mips/ralink/rt305x.c
@@ -0,0 +1,242 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt305x.h>
+
+#include "common.h"
+
+enum rt305x_soc_type rt305x_soc;
+
+struct ralink_pinmux_grp mode_mux[] = {
+	{
+		.name = "i2c",
+		.mask = RT305X_GPIO_MODE_I2C,
+		.gpio_first = RT305X_GPIO_I2C_SD,
+		.gpio_last = RT305X_GPIO_I2C_SCLK,
+	}, {
+		.name = "spi",
+		.mask = RT305X_GPIO_MODE_SPI,
+		.gpio_first = RT305X_GPIO_SPI_EN,
+		.gpio_last = RT305X_GPIO_SPI_CLK,
+	}, {
+		.name = "uartlite",
+		.mask = RT305X_GPIO_MODE_UART1,
+		.gpio_first = RT305X_GPIO_UART1_TXD,
+		.gpio_last = RT305X_GPIO_UART1_RXD,
+	}, {
+		.name = "jtag",
+		.mask = RT305X_GPIO_MODE_JTAG,
+		.gpio_first = RT305X_GPIO_JTAG_TDO,
+		.gpio_last = RT305X_GPIO_JTAG_TDI,
+	}, {
+		.name = "mdio",
+		.mask = RT305X_GPIO_MODE_MDIO,
+		.gpio_first = RT305X_GPIO_MDIO_MDC,
+		.gpio_last = RT305X_GPIO_MDIO_MDIO,
+	}, {
+		.name = "sdram",
+		.mask = RT305X_GPIO_MODE_SDRAM,
+		.gpio_first = RT305X_GPIO_SDRAM_MD16,
+		.gpio_last = RT305X_GPIO_SDRAM_MD31,
+	}, {
+		.name = "rgmii",
+		.mask = RT305X_GPIO_MODE_RGMII,
+		.gpio_first = RT305X_GPIO_GE0_TXD0,
+		.gpio_last = RT305X_GPIO_GE0_RXCLK,
+	}, {0}
+};
+
+struct ralink_pinmux_grp uart_mux[] = {
+	{
+		.name = "uartf",
+		.mask = RT305X_GPIO_MODE_UARTF,
+		.gpio_first = RT305X_GPIO_7,
+		.gpio_last = RT305X_GPIO_14,
+	}, {
+		.name = "pcm uartf",
+		.mask = RT305X_GPIO_MODE_PCM_UARTF,
+		.gpio_first = RT305X_GPIO_7,
+		.gpio_last = RT305X_GPIO_14,
+	}, {
+		.name = "pcm i2s",
+		.mask = RT305X_GPIO_MODE_PCM_I2S,
+		.gpio_first = RT305X_GPIO_7,
+		.gpio_last = RT305X_GPIO_14,
+	}, {
+		.name = "i2s uartf",
+		.mask = RT305X_GPIO_MODE_I2S_UARTF,
+		.gpio_first = RT305X_GPIO_7,
+		.gpio_last = RT305X_GPIO_14,
+	}, {
+		.name = "pcm gpio",
+		.mask = RT305X_GPIO_MODE_PCM_GPIO,
+		.gpio_first = RT305X_GPIO_10,
+		.gpio_last = RT305X_GPIO_14,
+	}, {
+		.name = "gpio uartf",
+		.mask = RT305X_GPIO_MODE_GPIO_UARTF,
+		.gpio_first = RT305X_GPIO_7,
+		.gpio_last = RT305X_GPIO_14,
+	}, {
+		.name = "gpio i2s",
+		.mask = RT305X_GPIO_MODE_GPIO_I2S,
+		.gpio_first = RT305X_GPIO_7,
+		.gpio_last = RT305X_GPIO_14,
+	}, {
+		.name = "gpio",
+		.mask = RT305X_GPIO_MODE_GPIO,
+	}, {0}
+};
+
+void rt305x_wdt_reset(void)
+{
+	u32 t;
+
+	/* enable WDT reset output on pin SRAM_CS_N */
+	t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+	t |= RT305X_SYSCFG_SRAM_CS0_MODE_WDT <<
+		RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT;
+	rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
+}
+
+struct ralink_pinmux gpio_pinmux = {
+	.mode = mode_mux,
+	.uart = uart_mux,
+	.uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
+	.wdt_reset = rt305x_wdt_reset,
+};
+
+void __init ralink_clk_init(void)
+{
+	unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
+	u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+
+	if (soc_is_rt305x() || soc_is_rt3350()) {
+		t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) &
+		     RT305X_SYSCFG_CPUCLK_MASK;
+		switch (t) {
+		case RT305X_SYSCFG_CPUCLK_LOW:
+			cpu_rate = 320000000;
+			break;
+		case RT305X_SYSCFG_CPUCLK_HIGH:
+			cpu_rate = 384000000;
+			break;
+		}
+		sys_rate = uart_rate = wdt_rate = cpu_rate / 3;
+	} else if (soc_is_rt3352()) {
+		t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) &
+		     RT3352_SYSCFG0_CPUCLK_MASK;
+		switch (t) {
+		case RT3352_SYSCFG0_CPUCLK_LOW:
+			cpu_rate = 384000000;
+			break;
+		case RT3352_SYSCFG0_CPUCLK_HIGH:
+			cpu_rate = 400000000;
+			break;
+		}
+		sys_rate = wdt_rate = cpu_rate / 3;
+		uart_rate = 40000000;
+	} else if (soc_is_rt5350()) {
+		t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) &
+		     RT5350_SYSCFG0_CPUCLK_MASK;
+		switch (t) {
+		case RT5350_SYSCFG0_CPUCLK_360:
+			cpu_rate = 360000000;
+			sys_rate = cpu_rate / 3;
+			break;
+		case RT5350_SYSCFG0_CPUCLK_320:
+			cpu_rate = 320000000;
+			sys_rate = cpu_rate / 4;
+			break;
+		case RT5350_SYSCFG0_CPUCLK_300:
+			cpu_rate = 300000000;
+			sys_rate = cpu_rate / 3;
+			break;
+		default:
+			BUG();
+		}
+		uart_rate = 40000000;
+		wdt_rate = sys_rate;
+	} else {
+		BUG();
+	}
+
+	ralink_clk_add("cpu", cpu_rate);
+	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000100.timer", wdt_rate);
+	ralink_clk_add("10000500.uart", uart_rate);
+	ralink_clk_add("10000c00.uartlite", uart_rate);
+}
+
+void __init ralink_of_remap(void)
+{
+	rt_sysc_membase = plat_of_remap_node("ralink,rt3050-sysc");
+	rt_memc_membase = plat_of_remap_node("ralink,rt3050-memc");
+
+	if (!rt_sysc_membase || !rt_memc_membase)
+		panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
+	unsigned char *name;
+	u32 n0;
+	u32 n1;
+	u32 id;
+
+	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+
+	if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) {
+		unsigned long icache_sets;
+
+		icache_sets = (read_c0_config1() >> 22) & 7;
+		if (icache_sets == 1) {
+			rt305x_soc = RT305X_SOC_RT3050;
+			name = "RT3050";
+			soc_info->compatible = "ralink,rt3050-soc";
+		} else {
+			rt305x_soc = RT305X_SOC_RT3052;
+			name = "RT3052";
+			soc_info->compatible = "ralink,rt3052-soc";
+		}
+	} else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
+		rt305x_soc = RT305X_SOC_RT3350;
+		name = "RT3350";
+		soc_info->compatible = "ralink,rt3350-soc";
+	} else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
+		rt305x_soc = RT305X_SOC_RT3352;
+		name = "RT3352";
+		soc_info->compatible = "ralink,rt3352-soc";
+	} else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
+		rt305x_soc = RT305X_SOC_RT5350;
+		name = "RT5350";
+		soc_info->compatible = "ralink,rt5350-soc";
+	} else {
+		panic("rt305x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+	}
+
+	id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+
+	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+		"Ralink %s id:%u rev:%u",
+		name,
+		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
+		(id & CHIP_ID_REV_MASK));
+}
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index 716e9a1..3af00b2 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -215,9 +215,9 @@
 };
 
 static struct platform_device rb532_wdt = {
-	.name 		= "rc32434_wdt",
-	.id 		= -1,
-	.resource 	= rb532_wdt_res,
+	.name		= "rc32434_wdt",
+	.id		= -1,
+	.resource	= rb532_wdt_res,
 	.num_resources	= ARRAY_SIZE(rb532_wdt_res),
 };
 
@@ -235,8 +235,8 @@
 };
 
 static struct platform_device rb532_uart = {
-	.name              = "serial8250",
-	.id                = PLAT8250_DEV_PLATFORM,
+	.name		   = "serial8250",
+	.id		   = PLAT8250_DEV_PLATFORM,
 	.dev.platform_data = &rb532_uart_res,
 };
 
@@ -273,7 +273,7 @@
 
 
 /* NAND definitions */
-#define NAND_CHIP_DELAY	25
+#define NAND_CHIP_DELAY 25
 
 static void __init rb532_nand_setup(void)
 {
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index 6ec41df..a180076 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -44,10 +44,10 @@
 
 static struct resource rb532_gpio_reg0_res[] = {
 	{
-		.name 	= "gpio_reg0",
-		.start 	= REGBASE + GPIOBASE,
-		.end 	= REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1,
-		.flags 	= IORESOURCE_MEM,
+		.name	= "gpio_reg0",
+		.start	= REGBASE + GPIOBASE,
+		.end	= REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1,
+		.flags	= IORESOURCE_MEM,
 	}
 };
 
diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
index f298430..3a431e8 100644
--- a/arch/mips/rb532/irq.c
+++ b/arch/mips/rb532/irq.c
@@ -21,7 +21,7 @@
  *
  * Copyright 2002 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
- *              stevel@mvista.com or source@mvista.com
+ *		stevel@mvista.com or source@mvista.com
  */
 
 #include <linux/bitops.h>
@@ -51,7 +51,7 @@
 	volatile u32 *base_addr;
 };
 
-#define RC32434_NR_IRQS  (GROUP4_IRQ_BASE + 32)
+#define RC32434_NR_IRQS	 (GROUP4_IRQ_BASE + 32)
 
 #if (NR_IRQS < RC32434_NR_IRQS)
 #error Too little irqs defined. Did you override <asm/irq.h> ?
diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c
index 4a6057b..a0a7922 100644
--- a/arch/mips/sgi-ip22/ip22-eisa.c
+++ b/arch/mips/sgi-ip22/ip22-eisa.c
@@ -2,7 +2,7 @@
  * Basic EISA bus support for the SGI Indigo-2.
  *
  * (C) 2002 Pascal Dameme <netinet@freesurf.fr>
- *      and Marc Zyngier <mzyngier@freesurf.fr>
+ *	and Marc Zyngier <mzyngier@freesurf.fr>
  *
  * This code is released under both the GPL version 2 and BSD
  * licenses.  Either license may be used.
@@ -40,13 +40,13 @@
 
 /* I2 has four EISA slots. */
 #define IP22_EISA_MAX_SLOTS	  4
-#define EISA_MAX_IRQ             16
+#define EISA_MAX_IRQ		 16
 
-#define EIU_MODE_REG     0x0001ffc0
-#define EIU_STAT_REG     0x0001ffc4
-#define EIU_PREMPT_REG   0x0001ffc8
-#define EIU_QUIET_REG    0x0001ffcc
-#define EIU_INTRPT_ACK   0x00010004
+#define EIU_MODE_REG	 0x0001ffc0
+#define EIU_STAT_REG	 0x0001ffc4
+#define EIU_PREMPT_REG	 0x0001ffc8
+#define EIU_QUIET_REG	 0x0001ffcc
+#define EIU_INTRPT_ACK	 0x00010004
 
 static char __init *decode_eisa_sig(unsigned long addr)
 {
diff --git a/arch/mips/sgi-ip22/ip22-gio.c b/arch/mips/sgi-ip22/ip22-gio.c
index f5ebc09..ab0e379 100644
--- a/arch/mips/sgi-ip22/ip22-gio.c
+++ b/arch/mips/sgi-ip22/ip22-gio.c
@@ -15,7 +15,7 @@
 
 static struct {
 	const char *name;
-	__u8       id;
+	__u8	   id;
 } gio_name_table[] = {
 	{ .name = "SGI Impact", .id = 0x10 },
 	{ .name = "Phobos G160", .id = 0x35 },
@@ -376,15 +376,15 @@
 }
 
 static struct bus_type gio_bus_type = {
-	.name      = "gio",
+	.name	   = "gio",
 	.dev_attrs = gio_dev_attrs,
-	.match     = gio_bus_match,
-	.probe     = gio_device_probe,
-	.remove    = gio_device_remove,
+	.match	   = gio_bus_match,
+	.probe	   = gio_device_probe,
+	.remove	   = gio_device_remove,
 	.suspend   = gio_device_suspend,
-	.resume    = gio_device_resume,
+	.resume	   = gio_device_resume,
 	.shutdown  = gio_device_shutdown,
-	.uevent    = gio_device_uevent,
+	.uevent	   = gio_device_uevent,
 };
 
 static struct resource gio_bus_resource = {
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index 3f2b763..3db64d5 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -1,12 +1,12 @@
 /*
  * ip22-int.c: Routines for generic manipulation of the INT[23] ASIC
- *             found on INDY and Indigo2 workstations.
+ *	       found on INDY and Indigo2 workstations.
  *
  * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997, 1998 Ralf Baechle (ralf@gnu.org)
  * Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu)
- *                    - Indigo2 changes
- *                    - Interrupt handling fixes
+ *		      - Indigo2 changes
+ *		      - Interrupt handling fixes
  * Copyright (C) 2001, 2003 Ladislav Michl (ladis@linux-mips.org)
  */
 #include <linux/types.h>
@@ -195,24 +195,24 @@
  * at all) like:
  *
  *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        Local IRQ level zero
- *             3        Local IRQ level one
- *             4        8254 Timer zero
- *             5        8254 Timer one
- *             6        Bus Error
- *             7        R4k timer (what we use)
+ *	--------	------
+ *	       0	Software (ignored)
+ *	       1	Software (ignored)
+ *	       2	Local IRQ level zero
+ *	       3	Local IRQ level one
+ *	       4	8254 Timer zero
+ *	       5	8254 Timer one
+ *	       6	Bus Error
+ *	       7	R4k timer (what we use)
  *
  * We handle the IRQ according to _our_ priority which is:
  *
- * Highest ----     R4k Timer
- *                  Local IRQ zero
- *                  Local IRQ one
- *                  Bus Error
- *                  8254 Timer zero
- * Lowest  ----     8254 Timer one
+ * Highest ----	    R4k Timer
+ *		    Local IRQ zero
+ *		    Local IRQ one
+ *		    Bus Error
+ *		    8254 Timer zero
+ * Lowest  ----	    8254 Timer one
  *
  * then we just return, if multiple IRQs are pending then we will just take
  * another exception, big deal.
diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c
index 75ada8a..7cec0a4 100644
--- a/arch/mips/sgi-ip22/ip22-mc.c
+++ b/arch/mips/sgi-ip22/ip22-mc.c
@@ -121,22 +121,22 @@
 	 */
 
 	/* Step 0: Make sure we turn off the watchdog in case it's
-	 *         still running (which might be the case after a
-	 *         soft reboot).
+	 *	   still running (which might be the case after a
+	 *	   soft reboot).
 	 */
 	tmp = sgimc->cpuctrl0;
 	tmp &= ~SGIMC_CCTRL0_WDOG;
 	sgimc->cpuctrl0 = tmp;
 
 	/* Step 1: The CPU/GIO error status registers will not latch
-	 *         up a new error status until the register has been
-	 *         cleared by the cpu.  These status registers are
-	 *         cleared by writing any value to them.
+	 *	   up a new error status until the register has been
+	 *	   cleared by the cpu.	These status registers are
+	 *	   cleared by writing any value to them.
 	 */
 	sgimc->cstat = sgimc->gstat = 0;
 
 	/* Step 2: Enable all parity checking in cpu control register
-	 *         zero.
+	 *	   zero.
 	 */
 	/* don't touch parity settings for IP28 */
 	tmp = sgimc->cpuctrl0;
@@ -147,7 +147,7 @@
 	sgimc->cpuctrl0 = tmp;
 
 	/* Step 3: Setup the MC write buffer depth, this is controlled
-	 *         in cpu control register 1 in the lower 4 bits.
+	 *	   in cpu control register 1 in the lower 4 bits.
 	 */
 	tmp = sgimc->cpuctrl1;
 	tmp &= ~0xf;
@@ -155,26 +155,26 @@
 	sgimc->cpuctrl1 = tmp;
 
 	/* Step 4: Initialize the RPSS divider register to run as fast
-	 *         as it can correctly operate.  The register is laid
-	 *         out as follows:
+	 *	   as it can correctly operate.	 The register is laid
+	 *	   out as follows:
 	 *
-	 *         ----------------------------------------
-	 *         |  RESERVED  |   INCREMENT   | DIVIDER |
-	 *         ----------------------------------------
-	 *          31        16 15            8 7       0
+	 *	   ----------------------------------------
+	 *	   |  RESERVED	|   INCREMENT	| DIVIDER |
+	 *	   ----------------------------------------
+	 *	    31	      16 15	       8 7	 0
 	 *
-	 *         DIVIDER determines how often a 'tick' happens,
-	 *         INCREMENT determines by how the RPSS increment
-	 *         registers value increases at each 'tick'. Thus,
-	 *         for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101
+	 *	   DIVIDER determines how often a 'tick' happens,
+	 *	   INCREMENT determines by how the RPSS increment
+	 *	   registers value increases at each 'tick'. Thus,
+	 *	   for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101
 	 */
 	sgimc->divider = 0x101;
 
 	/* Step 5: Initialize GIO64 arbitrator configuration register.
 	 *
 	 * NOTE: HPC init code in sgihpc_init() must run before us because
-	 *       we need to know Guiness vs. FullHouse and the board
-	 *       revision on this machine. You have been warned.
+	 *	 we need to know Guiness vs. FullHouse and the board
+	 *	 revision on this machine. You have been warned.
 	 */
 
 	/* First the basic invariants across all GIO64 implementations. */
@@ -187,18 +187,18 @@
 		if (SGIOC_SYSID_BOARDREV(sgioc->sysid) < 2) {
 			tmp |= SGIMC_GIOPAR_HPC264;	/* 2nd HPC at 64bits */
 			tmp |= SGIMC_GIOPAR_PLINEEXP0;	/* exp0 pipelines */
-			tmp |= SGIMC_GIOPAR_MASTEREXP1;	/* exp1 masters */
+			tmp |= SGIMC_GIOPAR_MASTEREXP1; /* exp1 masters */
 			tmp |= SGIMC_GIOPAR_RTIMEEXP0;	/* exp0 is realtime */
 		} else {
 			tmp |= SGIMC_GIOPAR_HPC264;	/* 2nd HPC 64bits */
 			tmp |= SGIMC_GIOPAR_PLINEEXP0;	/* exp[01] pipelined */
 			tmp |= SGIMC_GIOPAR_PLINEEXP1;
-			tmp |= SGIMC_GIOPAR_MASTEREISA;	/* EISA masters */
+			tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA masters */
 		}
 	} else {
 		/* Guiness specific settings. */
 		tmp |= SGIMC_GIOPAR_EISA64;	/* MC talks to EISA at 64bits */
-		tmp |= SGIMC_GIOPAR_MASTEREISA;	/* EISA bus can act as master */
+		tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA bus can act as master */
 	}
 	sgimc->giopar = tmp;	/* poof */
 
diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c
index 0177566..e077036 100644
--- a/arch/mips/sgi-ip22/ip22-nvram.c
+++ b/arch/mips/sgi-ip22/ip22-nvram.c
@@ -14,11 +14,11 @@
 #define EEPROM_WRITE	0xa000	/* serial memory write */
 #define EEPROM_WRALL	0x8800	/* write all registers */
 #define EEPROM_WDS	0x8000	/* disable all programming */
-#define	EEPROM_PRREAD	0xc000	/* read protect register */
-#define	EEPROM_PREN	0x9800	/* enable protect register mode */
-#define	EEPROM_PRCLEAR	0xffff	/* clear protect register */
-#define	EEPROM_PRWRITE	0xa000	/* write protect register */
-#define	EEPROM_PRDS	0x8000	/* disable protect register, forever */
+#define EEPROM_PRREAD	0xc000	/* read protect register */
+#define EEPROM_PREN	0x9800	/* enable protect register mode */
+#define EEPROM_PRCLEAR	0xffff	/* clear protect register */
+#define EEPROM_PRWRITE	0xa000	/* write protect register */
+#define EEPROM_PRDS	0x8000	/* disable protect register, forever */
 
 #define EEPROM_EPROT	0x01	/* Protect register enable */
 #define EEPROM_CSEL	0x02	/* Chip select */
@@ -27,7 +27,7 @@
 #define EEPROM_DATI	0x10	/* Data in */
 
 /* We need to use these functions early... */
-#define delay()	({						\
+#define delay() ({						\
 	int x;							\
 	for (x=0; x<100000; x++) __asm__ __volatile__(""); })
 
@@ -35,7 +35,7 @@
 	__raw_writel(__raw_readl(ptr) & ~EEPROM_DATO, ptr);	\
 	__raw_writel(__raw_readl(ptr) & ~EEPROM_ECLK, ptr);	\
 	__raw_writel(__raw_readl(ptr) & ~EEPROM_EPROT, ptr);	\
-	delay();		                                \
+	delay();						\
 	__raw_writel(__raw_readl(ptr) | EEPROM_CSEL, ptr);	\
 	__raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
 
@@ -46,7 +46,7 @@
 	__raw_writel(__raw_readl(ptr) | EEPROM_EPROT, ptr);	\
 	__raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
 
-#define	BITS_IN_COMMAND	11
+#define BITS_IN_COMMAND 11
 /*
  * clock in the nvram command and the register number. For the
  * national semiconductor nv ram chip the op code is 3 bits and
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index 698904d..a14fd32 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -137,7 +137,7 @@
 
 	eth0_pd.hpc = hpc3c0;
 	eth0_pd.irq = SGI_ENET_IRQ;
-#define EADDR_NVOFS     250
+#define EADDR_NVOFS	250
 	for (i = 0; i < 3; i++) {
 		unsigned short tmp = ip22_nvram_read(EADDR_NVOFS / 2 + i);
 
@@ -155,17 +155,17 @@
 		return 0;
 
 	sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | SGIMC_GIOPAR_EXP164 |
-	                 SGIMC_GIOPAR_HPC264;
+			 SGIMC_GIOPAR_HPC264;
 	hpc3c1->pbus_piocfg[0][0] = 0x3ffff;
 	/* interrupt/config register on Challenge S Mezz board */
 	hpc3c1->pbus_extregs[0][0] = 0x30;
 
 	eth1_pd.hpc = hpc3c1;
 	eth1_pd.irq = SGI_GIO_0_IRQ;
-#define EADDR_NVOFS     250
+#define EADDR_NVOFS	250
 	for (i = 0; i < 3; i++) {
 		unsigned short tmp = ip22_eeprom_read(&hpc3c1->eeprom,
-		                                      EADDR_NVOFS / 2 + i);
+						      EADDR_NVOFS / 2 + i);
 
 		eth1_pd.mac[2 * i]     = tmp >> 8;
 		eth1_pd.mac[2 * i + 1] = tmp & 0xff;
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index 20363d2..063c2dd 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -101,7 +101,7 @@
 	del_timer(&debounce_timer);
 	if (sgint->istat1 & SGINT_ISTAT1_PWR) {
 		/* Interrupt still being sent. */
-		debounce_timer.expires = jiffies + (HZ / 20); /* 0.05s  */
+		debounce_timer.expires = jiffies + (HZ / 20); /* 0.05s	*/
 		add_timer(&debounce_timer);
 
 		sgioc->panel = SGIOC_PANEL_POWERON | SGIOC_PANEL_POWERINTR |
@@ -166,7 +166,7 @@
 }
 
 static int panic_event(struct notifier_block *this, unsigned long event,
-                      void *ptr)
+		      void *ptr)
 {
 	if (machine_state & MACHINE_PANICED)
 		return NOTIFY_DONE;
diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c
index 0626555..3f47346 100644
--- a/arch/mips/sgi-ip22/ip28-berr.c
+++ b/arch/mips/sgi-ip22/ip28-berr.c
@@ -136,14 +136,14 @@
 	hpc3.scsi[1].cbp   = hpc3c0->scsi_chan1.cbptr;
 	hpc3.scsi[1].ndptr = hpc3c0->scsi_chan1.ndptr;
 
-	hpc3.ethrx.addr  = (unsigned long)&hpc3c0->ethregs.rx_cbptr;
-	hpc3.ethrx.ctrl  = hpc3c0->ethregs.rx_ctrl; /* HPC3_ERXCTRL_ACTIVE ? */
-	hpc3.ethrx.cbp   = hpc3c0->ethregs.rx_cbptr;
+	hpc3.ethrx.addr	 = (unsigned long)&hpc3c0->ethregs.rx_cbptr;
+	hpc3.ethrx.ctrl	 = hpc3c0->ethregs.rx_ctrl; /* HPC3_ERXCTRL_ACTIVE ? */
+	hpc3.ethrx.cbp	 = hpc3c0->ethregs.rx_cbptr;
 	hpc3.ethrx.ndptr = hpc3c0->ethregs.rx_ndptr;
 
-	hpc3.ethtx.addr  = (unsigned long)&hpc3c0->ethregs.tx_cbptr;
-	hpc3.ethtx.ctrl  = hpc3c0->ethregs.tx_ctrl; /* HPC3_ETXCTRL_ACTIVE ? */
-	hpc3.ethtx.cbp   = hpc3c0->ethregs.tx_cbptr;
+	hpc3.ethtx.addr	 = (unsigned long)&hpc3c0->ethregs.tx_cbptr;
+	hpc3.ethtx.ctrl	 = hpc3c0->ethregs.tx_ctrl; /* HPC3_ETXCTRL_ACTIVE ? */
+	hpc3.ethtx.cbp	 = hpc3c0->ethregs.tx_cbptr;
 	hpc3.ethtx.ndptr = hpc3c0->ethregs.tx_ndptr;
 
 	for (i = 0; i < 8; ++i) {
@@ -196,11 +196,11 @@
 			scb | (1 << 12)*i);
 	}
 	i = read_c0_config();
-	scb = i & (1 << 13) ? 7:6;      /* scblksize = 2^[7..6] */
+	scb = i & (1 << 13) ? 7:6;	/* scblksize = 2^[7..6] */
 	scw = ((i >> 16) & 7) + 19 - 1; /* scwaysize = 2^[24..19] / 2 */
 
 	i = ((1 << scw) - 1) & ~((1 << scb) - 1);
-	printk(KERN_ERR "S: 0: %08x %08x, 1: %08x %08x  (PA[%u:%u] %05x)\n",
+	printk(KERN_ERR "S: 0: %08x %08x, 1: %08x %08x	(PA[%u:%u] %05x)\n",
 		cache_tags.tags[0][0].hi, cache_tags.tags[0][0].lo,
 		cache_tags.tags[0][1].hi, cache_tags.tags[0][1].lo,
 		scw-1, scb, i & (unsigned)cache_tags.err_addr);
diff --git a/arch/mips/sgi-ip27/ip27-berr.c b/arch/mips/sgi-ip27/ip27-berr.c
index 04cebad..692778d 100644
--- a/arch/mips/sgi-ip27/ip27-berr.c
+++ b/arch/mips/sgi-ip27/ip27-berr.c
@@ -39,7 +39,7 @@
 
 	printk("Hub has valid error information:\n");
 	if (errst0 & PI_ERR_ST0_OVERRUN_MASK)
-		printk("Overrun is set.  Error stack may contain additional "
+		printk("Overrun is set.	 Error stack may contain additional "
 		       "information.\n");
 	printk("Hub error address is %08lx\n",
 	       (errst0 & PI_ERR_ST0_ADDR_MASK) >> (PI_ERR_ST0_ADDR_SHFT - 3));
@@ -85,7 +85,7 @@
 	board_be_handler = ip27_be_handler;
 
 	LOCAL_HUB_S(PI_ERR_INT_PEND,
-	            cpu ? PI_ERR_CLEAR_ALL_B : PI_ERR_CLEAR_ALL_A);
+		    cpu ? PI_ERR_CLEAR_ALL_B : PI_ERR_CLEAR_ALL_A);
 	LOCAL_HUB_S(PI_ERR_INT_MASK_A + cpuoff, 0);
 	LOCAL_HUB_S(PI_ERR_STACK_ADDR_A + cpuoff, 0);
 	LOCAL_HUB_S(PI_ERR_STACK_SIZE, 0);	/* Disable error stack */
diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c
index 984e561..b952d5b 100644
--- a/arch/mips/sgi-ip27/ip27-console.c
+++ b/arch/mips/sgi-ip27/ip27-console.c
@@ -31,7 +31,7 @@
 	return &ioc3->sregs.uarta;
 }
 
-void __init prom_putchar(char c)
+void prom_putchar(char c)
 {
 	struct ioc3_uartregs *uart = console_uart();
 
diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c
index cd0d5b0..328ceb3 100644
--- a/arch/mips/sgi-ip27/ip27-hubio.c
+++ b/arch/mips/sgi-ip27/ip27-hubio.c
@@ -17,11 +17,11 @@
 static int force_fire_and_forget = 1;
 
 /**
- * hub_pio_map  -  establish a HUB PIO mapping
+ * hub_pio_map	-  establish a HUB PIO mapping
  *
  * @hub:	hub to perform PIO mapping on
  * @widget:	widget ID to perform PIO mapping for
- * @xtalk_addr:	xtalk_address that needs to be mapped
+ * @xtalk_addr: xtalk_address that needs to be mapped
  * @size:	size of the PIO mapping
  *
  **/
@@ -78,8 +78,8 @@
 /*
  * hub_setup_prb(nasid, prbnum, credits, conveyor)
  *
- * 	Put a PRB into fire-and-forget mode if conveyor isn't set.  Otherwise,
- * 	put it into conveyor belt mode with the specified number of credits.
+ *	Put a PRB into fire-and-forget mode if conveyor isn't set.  Otherwise,
+ *	put it into conveyor belt mode with the specified number of credits.
  */
 static void hub_setup_prb(nasid_t nasid, int prbnum, int credits)
 {
@@ -125,12 +125,12 @@
  * so we turn off access to all widgets for the duration of the function.
  *
  * XXX - This code should really check what kind of widget we're talking
- * to.  Bridges can only handle three requests, but XG will do more.
+ * to.	Bridges can only handle three requests, but XG will do more.
  * How many can crossbow handle to widget 0?  We're assuming 1.
  *
  * XXX - There is a bug in the crossbow that link reset PIOs do not
  * return write responses.  The easiest solution to this problem is to
- * leave widget 0 (xbow) in fire-and-forget mode at all times.  This
+ * leave widget 0 (xbow) in fire-and-forget mode at all times.	This
  * only affects pio's to xbow registers, which should be rare.
  **/
 static void hub_set_piomode(nasid_t nasid)
@@ -167,7 +167,7 @@
 }
 
 /*
- * hub_pio_init  -  PIO-related hub initialization
+ * hub_pio_init	 -  PIO-related hub initialization
  *
  * @hub:	hubinfo structure for our hub
  */
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 923c080..d41b1c6 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -151,7 +151,7 @@
 get_nasid(void)
 {
 	return (nasid_t)((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_NODEID_MASK)
-	                 >> NSRI_NODEID_SHFT);
+			 >> NSRI_NODEID_SHFT);
 }
 
 /*
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index 69a939ae..2315cfe 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -62,7 +62,7 @@
  * from the irq value
  */
 #define IRQ_TO_BRIDGE(i)		irq_to_bridge[(i)]
-#define	SLOT_FROM_PCI_IRQ(i)		irq_to_slot[i]
+#define SLOT_FROM_PCI_IRQ(i)		irq_to_slot[i]
 
 static inline int alloc_level(int cpu, int irq)
 {
@@ -281,11 +281,11 @@
 	device |= (pin << (pin*3));
 	bridge->b_int_device = device;
 
-        bridge->b_wid_tflush;
+	bridge->b_wid_tflush;
 
 	intr_connect_level(cpu, swlevel);
 
-        return 0;       /* Never anything pending.  */
+	return 0;	/* Never anything pending.  */
 }
 
 /* Shutdown one of the (PCI ...) IRQs routes over a bridge.  */
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index cd8fcab..3505d08 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -31,8 +31,8 @@
 #include <asm/sn/sn_private.h>
 
 
-#define SLOT_PFNSHIFT           (SLOT_SHIFT - PAGE_SHIFT)
-#define PFN_NASIDSHFT           (NASID_SHFT - PAGE_SHIFT)
+#define SLOT_PFNSHIFT		(SLOT_SHIFT - PAGE_SHIFT)
+#define PFN_NASIDSHFT		(NASID_SHFT - PAGE_SHIFT)
 
 struct node_data *__node_data[MAX_COMPACT_NODES];
 
@@ -43,7 +43,7 @@
 static int is_fine_dirmode(void)
 {
 	return (((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_REGIONSIZE_MASK)
-	        >> NSRI_REGIONSIZE_SHFT) & REGIONSIZE_FINE);
+		>> NSRI_REGIONSIZE_SHFT) & REGIONSIZE_FINE);
 }
 
 static hubreg_t get_region(cnodeid_t cnode)
@@ -66,7 +66,7 @@
 	}
 }
 
-#define	rou_rflag	rou_flags
+#define rou_rflag	rou_flags
 
 static int router_distance;
 
@@ -412,7 +412,7 @@
 	slot_freepfn += PFN_UP(sizeof(struct pglist_data) +
 			       sizeof(struct hub_data));
 
-  	bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn,
+	bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn,
 					start_pfn, end_pfn);
 	free_bootmem_with_active_regions(node, end_pfn);
 	reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
@@ -422,7 +422,7 @@
 }
 
 /*
- * A node with nothing.  We use it to avoid any special casing in
+ * A node with nothing.	 We use it to avoid any special casing in
  * cpumask_of_node
  */
 static struct node_data null_node = {
diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c
index 005c29e..a2358b4 100644
--- a/arch/mips/sgi-ip27/ip27-nmi.c
+++ b/arch/mips/sgi-ip27/ip27-nmi.c
@@ -54,7 +54,7 @@
 void nmi_cpu_eframe_save(nasid_t nasid, int slice)
 {
 	struct reg_struct *nr;
-	int 		i;
+	int		i;
 
 	/* Get the pointer to the current cpu's register set. */
 	nr = (struct reg_struct *)
@@ -86,12 +86,12 @@
 	printk("%s\n", print_tainted());
 	printk("ErrEPC: %016lx %pS\n", nr->error_epc, (void *) nr->error_epc);
 	printk("ra    : %016lx %pS\n", nr->gpr[31], (void *) nr->gpr[31]);
-	printk("Status: %08lx         ", nr->sr);
+	printk("Status: %08lx	      ", nr->sr);
 
 	if (nr->sr & ST0_KX)
 		printk("KX ");
 	if (nr->sr & ST0_SX)
-		printk("SX 	");
+		printk("SX	");
 	if (nr->sr & ST0_UX)
 		printk("UX ");
 
diff --git a/arch/mips/sgi-ip27/ip27-reset.c b/arch/mips/sgi-ip27/ip27-reset.c
index f347bc6..ac37e54 100644
--- a/arch/mips/sgi-ip27/ip27-reset.c
+++ b/arch/mips/sgi-ip27/ip27-reset.c
@@ -29,7 +29,7 @@
 void machine_halt(void) __attribute__((noreturn));
 void machine_power_off(void) __attribute__((noreturn));
 
-#define noreturn while(1);				/* Silence gcc.  */
+#define noreturn while(1);				/* Silence gcc.	 */
 
 /* XXX How to pass the reboot command to the firmware??? */
 static void ip27_machine_restart(char *command)
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index 735b43b..f946381 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -191,7 +191,7 @@
 }
 
 /*
- * Launch a slave into smp_bootstrap().  It doesn't take an argument, and we
+ * Launch a slave into smp_bootstrap().	 It doesn't take an argument, and we
  * set sp to the kernel stack of the newly created idle process, gp to the proc
  * struct so that current_thread_info() will work.
  */
@@ -219,7 +219,7 @@
 
 	/*
 	 * Assumption to be fixed: we're always booted on logical / physical
-	 * processor 0.  While we're always running on logical processor 0
+	 * processor 0.	 While we're always running on logical processor 0
 	 * this still means this is physical processor zero; it might for
 	 * example be disabled in the firmware.
 	 */
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 13cfeab..fff58ac1 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -117,8 +117,8 @@
 	cd->name		= name;
 	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
 	clockevent_set_clock(cd, CYCLES_PER_SEC);
-	cd->max_delta_ns        = clockevent_delta2ns(0xfffffffffffff, cd);
-	cd->min_delta_ns        = clockevent_delta2ns(0x300, cd);
+	cd->max_delta_ns	= clockevent_delta2ns(0xfffffffffffff, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(0x300, cd);
 	cd->rating		= 200;
 	cd->irq			= irq;
 	cd->cpumask		= cpumask_of(cpu);
@@ -153,7 +153,7 @@
 
 struct clocksource hub_rt_clocksource = {
 	.name	= "HUB-RT",
-	.rating	= 200,
+	.rating = 200,
 	.read	= hub_rt_read,
 	.mask	= CLOCKSOURCE_MASK(52),
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c
index 5e871e7..a4df7d0 100644
--- a/arch/mips/sgi-ip27/ip27-xtalk.c
+++ b/arch/mips/sgi-ip27/ip27-xtalk.c
@@ -17,15 +17,15 @@
 #include <asm/xtalk/xtalk.h>
 
 
-#define XBOW_WIDGET_PART_NUM    0x0
-#define XXBOW_WIDGET_PART_NUM   0xd000  /* Xbow in Xbridge */
-#define BASE_XBOW_PORT  	8     /* Lowest external port */
+#define XBOW_WIDGET_PART_NUM	0x0
+#define XXBOW_WIDGET_PART_NUM	0xd000	/* Xbow in Xbridge */
+#define BASE_XBOW_PORT		8     /* Lowest external port */
 
 extern int bridge_probe(nasid_t nasid, int widget, int masterwid);
 
 static int __cpuinit probe_one_port(nasid_t nasid, int widget, int masterwid)
 {
-	widgetreg_t 		widget_id;
+	widgetreg_t		widget_id;
 	xwidget_part_num_t	partnum;
 
 	widget_id = *(volatile widgetreg_t *)
@@ -102,10 +102,10 @@
 
 void __cpuinit xtalk_probe_node(cnodeid_t nid)
 {
-	volatile u64 		hubreg;
-	nasid_t	 		nasid;
+	volatile u64		hubreg;
+	nasid_t			nasid;
 	xwidget_part_num_t	partnum;
-	widgetreg_t 		widget_id;
+	widgetreg_t		widget_id;
 
 	nasid = COMPACT_TO_NASID_NODEID(nid);
 	hubreg = REMOTE_HUB_L(nasid, IIO_LLP_CSR);
@@ -115,7 +115,7 @@
 		return;
 
 	widget_id = *(volatile widgetreg_t *)
-                       (RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID);
+		       (RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID);
 	partnum = XWIDGET_PART_NUM(widget_id);
 
 	printk(KERN_INFO "Cpu %d, Nasid 0x%x: partnum 0x%x is ",
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index e7d5054..e0c7d9e 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -173,7 +173,7 @@
 
 /*
  * This is for MACE PCI interrupts.  We can decrease bus traffic by masking
- * as close to the source as possible.  This also means we can take the
+ * as close to the source as possible.	This also means we can take the
  * next chunk of the CRIME register in one piece.
  */
 
@@ -271,11 +271,11 @@
 	unsigned int crime_int = 0;
 
 	maceisa_mask &= ~(1 << (d->irq - MACEISA_AUDIO_SW_IRQ));
-        if (!(maceisa_mask & MACEISA_AUDIO_INT))
+	if (!(maceisa_mask & MACEISA_AUDIO_INT))
 		crime_int |= MACE_AUDIO_INT;
-        if (!(maceisa_mask & MACEISA_MISC_INT))
+	if (!(maceisa_mask & MACEISA_MISC_INT))
 		crime_int |= MACE_MISC_INT;
-        if (!(maceisa_mask & MACEISA_SUPERIO_INT))
+	if (!(maceisa_mask & MACEISA_SUPERIO_INT))
 		crime_int |= MACE_SUPERIO_INT;
 	crime_mask &= ~crime_int;
 	crime->imask = crime_mask;
diff --git a/arch/mips/sibyte/Platform b/arch/mips/sibyte/Platform
index 911dfe3..d03a075 100644
--- a/arch/mips/sibyte/Platform
+++ b/arch/mips/sibyte/Platform
@@ -9,7 +9,7 @@
 #
 # Sibyte SB1250 / BCM1480 family of SOCs
 #
-cflags-$(CONFIG_SIBYTE_BCM112X)	+=					\
+cflags-$(CONFIG_SIBYTE_BCM112X) +=					\
 		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
 		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
 
@@ -18,11 +18,11 @@
 		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
 		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
 
-cflags-$(CONFIG_SIBYTE_BCM1x55)	+=					\
+cflags-$(CONFIG_SIBYTE_BCM1x55) +=					\
 		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
 		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
 
-cflags-$(CONFIG_SIBYTE_BCM1x80)	+=					\
+cflags-$(CONFIG_SIBYTE_BCM1x80) +=					\
 		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
 		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
 
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 215713e..09d6e16a 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -283,10 +283,10 @@
 	for (cpu = 0; cpu < 4; cpu++) {
 		__raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
 						 (K_BCM1480_INT_MBOX_0_0 << 3)));
-        }
+	}
 
 
-	/* Clear the mailboxes.  The firmware may leave them dirty */
+	/* Clear the mailboxes.	 The firmware may leave them dirty */
 	for (cpu = 0; cpu < 4; cpu++) {
 		__raw_writeq(0xffffffffffffffffULL,
 			     IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU)));
@@ -307,7 +307,7 @@
 
 	/*
 	 * Note that the timer interrupts are also mapped, but this is
-	 * done in bcm1480_time_init().  Also, the profiling driver
+	 * done in bcm1480_time_init().	 Also, the profiling driver
 	 * does its own management of IP7.
 	 */
 
@@ -325,7 +325,7 @@
 
 	/*
 	 * Default...we've hit an IP[2] interrupt, which means we've got to
-	 * check the 1480 interrupt registers to figure out what to do.  Need
+	 * check the 1480 interrupt registers to figure out what to do.	 Need
 	 * to detect which CPU we're on, now that smp_affinity is supported.
 	 */
 	base = A_BCM1480_IMR_MAPPER(cpu);
diff --git a/arch/mips/sibyte/common/cfe.c b/arch/mips/sibyte/common/cfe.c
index 6343011..588e180 100644
--- a/arch/mips/sibyte/common/cfe.c
+++ b/arch/mips/sibyte/common/cfe.c
@@ -127,8 +127,8 @@
 				if ((initrd_pstart > addr) &&
 				    (initrd_pstart < (addr + size))) {
 					add_memory_region(addr,
-					                  initrd_pstart - addr,
-					                  BOOT_MEM_RAM);
+							  initrd_pstart - addr,
+							  BOOT_MEM_RAM);
 					rd_flag = 1;
 				}
 				if ((initrd_pend > addr) &&
@@ -195,7 +195,7 @@
 
 	/*
 	 *Initrd location comes in the form "<hex size of ramdisk in bytes>@<location in memory>"
-	 *  e.g. initrd=3abfd@80010000.  This is set up by the loader.
+	 *  e.g. initrd=3abfd@80010000.	 This is set up by the loader.
 	 */
 	for (tmp = str; *tmp != '@'; tmp++) {
 		if (!*tmp) {
@@ -244,7 +244,7 @@
 	int *prom_vec = (int *) fw_arg3;
 
 	_machine_restart   = cfe_linux_restart;
-	_machine_halt      = cfe_linux_halt;
+	_machine_halt	   = cfe_linux_halt;
 	pm_power_off = cfe_linux_halt;
 
 	/*
@@ -299,7 +299,7 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 	{
 		char *ptr;
-		/* Need to find out early whether we've got an initrd.  So scan
+		/* Need to find out early whether we've got an initrd.	So scan
 		   the list looking now */
 		for (ptr = arcs_cmdline; *ptr; ptr++) {
 			while (*ptr == ' ') {
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index e8c4538..2188b39a 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -152,7 +152,7 @@
 
 static void arm_tb(void)
 {
-        u64 scdperfcnt;
+	u64 scdperfcnt;
 	u64 next = (1ULL << 40) - tb_period;
 	u64 tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
 
@@ -257,8 +257,8 @@
 
 /*
  * Requires: Already called zclk_timer_init with a value that won't
- *           saturate 40 bits.  No subsequent use of SCD performance counters
- *           or trace buffer.
+ *	     saturate 40 bits.	No subsequent use of SCD performance counters
+ *	     or trace buffer.
  */
 
 static int sbprof_zbprof_start(struct file *filp)
@@ -288,8 +288,8 @@
 
 	/*
 	 * We grab this interrupt to prevent others from trying to use
-         * it, even though we don't want to service the interrupts
-         * (they only feed into the trace-on-interrupt mechanism)
+	 * it, even though we don't want to service the interrupts
+	 * (they only feed into the trace-on-interrupt mechanism)
 	 */
 	if (request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) {
 		free_irq(K_INT_TRACE_FREEZE, &sbp);
@@ -298,7 +298,7 @@
 
 	/*
 	 * I need the core to mask these, but the interrupt mapper to
-	 *  pass them through.  I am exploiting my knowledge that
+	 *  pass them through.	I am exploiting my knowledge that
 	 *  cp0_status masks out IP[5]. krw
 	 */
 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
@@ -328,7 +328,7 @@
 	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
 
 	/* Initialize Trace Event 0-7 */
-	/*				when interrupt  */
+	/*				when interrupt	*/
 	__raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
 	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
 	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
@@ -479,7 +479,7 @@
 			return err;
 		}
 		pr_debug(DEVNAME ": read from sample %d, %d bytes\n",
-		         cur_sample, cur_count);
+			 cur_sample, cur_count);
 		size -= cur_count;
 		sample_left -= cur_count;
 		if (!sample_left) {
@@ -540,7 +540,7 @@
 	.open		= sbprof_tb_open,
 	.release	= sbprof_tb_release,
 	.read		= sbprof_tb_read,
-	.unlocked_ioctl	= sbprof_tb_ioctl,
+	.unlocked_ioctl = sbprof_tb_ioctl,
 	.compat_ioctl	= sbprof_tb_ioctl,
 	.mmap		= NULL,
 	.llseek		= default_llseek,
diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c
index 86e6e54..e651105 100644
--- a/arch/mips/sibyte/sb1250/bus_watcher.c
+++ b/arch/mips/sibyte/sb1250/bus_watcher.c
@@ -71,7 +71,7 @@
  * already been destructively read out of the registers.
  *
  * notes: this is currently used by the cache error handler
- *        should provide locking against the interrupt handler
+ *	  should provide locking against the interrupt handler
  */
 void check_bus_watcher(void)
 {
@@ -119,7 +119,7 @@
 		       (int)G_SCD_BERR_RID(stats->status),
 		       (int)G_SCD_BERR_DCODE(stats->status));
 	/* XXXKW indicate multiple errors between printings, or stats
-           collection (or both)? */
+	   collection (or both)? */
 	if (stats->status & M_SCD_BERR_MULTERRS)
 		len += sprintf(page+len, "Multiple errors observed since last check.\n");
 	if (stats->status_printed) {
@@ -168,7 +168,7 @@
  * sibyte_bw_int - handle bus watcher interrupts and accumulate counts
  *
  * notes: possible re-entry due to multiple sources
- *        should check/indicate saturation
+ *	  should check/indicate saturation
  */
 static irqreturn_t sibyte_bw_int(int irq, void *data)
 {
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 340aaf6..fca0cdb 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -264,7 +264,7 @@
 		     IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
 			    (K_INT_MBOX_0 << 3)));
 
-	/* Clear the mailboxes.  The firmware may leave them dirty */
+	/* Clear the mailboxes.	 The firmware may leave them dirty */
 	__raw_writeq(0xffffffffffffffffULL,
 		     IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
 	__raw_writeq(0xffffffffffffffffULL,
@@ -277,7 +277,7 @@
 
 	/*
 	 * Note that the timer interrupts are also mapped, but this is
-	 * done in sb1250_time_init().  Also, the profiling driver
+	 * done in sb1250_time_init().	Also, the profiling driver
 	 * does its own management of IP7.
 	 */
 
@@ -294,7 +294,7 @@
 
 	/*
 	 * Default...we've hit an IP[2] interrupt, which means we've got to
-	 * check the 1250 interrupt registers to figure out what to do.  Need
+	 * check the 1250 interrupt registers to figure out what to do.	 Need
 	 * to detect which CPU we're on, now that smp_affinity is supported.
 	 */
 	mask = __raw_readq(IOADDR(A_IMR_REGISTER(cpu,
@@ -323,7 +323,7 @@
 	if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
 		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
 	else if (pending & CAUSEF_IP4)
-		do_IRQ(K_INT_TIMER_0 + cpu); 	/* sb1250_timer_interrupt() */
+		do_IRQ(K_INT_TIMER_0 + cpu);	/* sb1250_timer_interrupt() */
 
 #ifdef CONFIG_SMP
 	else if (pending & CAUSEF_IP3)
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index 92da315..a14bd4c 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -203,8 +203,8 @@
 	case K_SYS_REVISION_BCM1250_PASS1:
 #ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
 		printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, "
-		            "and the kernel doesn't have the proper "
-		            "workarounds compiled in. @@@@\n");
+			    "and the kernel doesn't have the proper "
+			    "workarounds compiled in. @@@@\n");
 		bad_config = 1;
 #endif
 		break;
@@ -213,28 +213,28 @@
 #if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || \
     !defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS)
 		printk("@@@@ This is a BCM1250 A3-A10 board, and the "
-		            "kernel doesn't have the proper workarounds "
-		            "compiled in. @@@@\n");
+			    "kernel doesn't have the proper workarounds "
+			    "compiled in. @@@@\n");
 		bad_config = 1;
 #endif
 #ifdef CONFIG_CPU_HAS_PREFETCH
 		printk("@@@@ Prefetches may be enabled in this kernel, "
-		            "but are buggy on this board.  @@@@\n");
+			    "but are buggy on this board.  @@@@\n");
 		bad_config = 1;
 #endif
 		break;
 	case K_SYS_REVISION_BCM1250_PASS2_2:
 #ifndef CONFIG_SB1_PASS_2_WORKAROUNDS
 		printk("@@@@ This is a BCM1250 B1/B2. board, and the "
-		            "kernel doesn't have the proper workarounds "
-		            "compiled in. @@@@\n");
+			    "kernel doesn't have the proper workarounds "
+			    "compiled in. @@@@\n");
 		bad_config = 1;
 #endif
 #if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || \
     !defined(CONFIG_CPU_HAS_PREFETCH)
 		printk("@@@@ This is a BCM1250 B1/B2, but the kernel is "
-		            "conservatively configured for an 'A' stepping. "
-		            "@@@@\n");
+			    "conservatively configured for an 'A' stepping. "
+			    "@@@@\n");
 #endif
 		break;
 	default:
diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c
index 0973352..9480c14 100644
--- a/arch/mips/sibyte/swarm/platform.c
+++ b/arch/mips/sibyte/swarm/platform.c
@@ -13,7 +13,7 @@
 
 #define DRV_NAME	"pata-swarm"
 
-#define SWARM_IDE_SHIFT	5
+#define SWARM_IDE_SHIFT 5
 #define SWARM_IDE_BASE	0x1f0
 #define SWARM_IDE_CTRL	0x3f6
 
@@ -123,7 +123,7 @@
 	case K_SYS_SOC_TYPE_BCM1120:
 	case K_SYS_SOC_TYPE_BCM1125:
 	case K_SYS_SOC_TYPE_BCM1125H:
-	case K_SYS_SOC_TYPE_BCM1250_ALT2:       /* Hybrid */
+	case K_SYS_SOC_TYPE_BCM1250_ALT2:	/* Hybrid */
 		ret = platform_add_devices(sb1250_devs, 2);
 		break;
 	case K_SYS_SOC_TYPE_BCM1x55:
diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c
index 4438b21..178a824 100644
--- a/arch/mips/sibyte/swarm/rtc_xicor1241.c
+++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c
@@ -4,8 +4,8 @@
  * Copyright (C) 2002 MontaVista Software Inc.
  * Author: jsun@mvista.com or jsun@junsun.net
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -28,15 +28,15 @@
  * Register bits
  */
 
-#define X1241REG_SR_BAT	0x80		/* currently on battery power */
+#define X1241REG_SR_BAT 0x80		/* currently on battery power */
 #define X1241REG_SR_RWEL 0x04		/* r/w latch is enabled, can write RTC */
 #define X1241REG_SR_WEL 0x02		/* r/w latch is unlocked, can enable r/w now */
 #define X1241REG_SR_RTCF 0x01		/* clock failed */
 #define X1241REG_BL_BP2 0x80		/* block protect 2 */
 #define X1241REG_BL_BP1 0x40		/* block protect 1 */
 #define X1241REG_BL_BP0 0x20		/* block protect 0 */
-#define X1241REG_BL_WD1	0x10
-#define X1241REG_BL_WD0	0x08
+#define X1241REG_BL_WD1 0x10
+#define X1241REG_BL_WD0 0x08
 #define X1241REG_HR_MIL 0x80		/* military time format */
 
 /*
@@ -61,50 +61,50 @@
 
 static int xicor_read(uint8_t addr)
 {
-        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
 
 	__raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
 	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
 	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
 		     SMB_CSR(R_SMB_START));
 
-        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
 
 	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
 		     SMB_CSR(R_SMB_START));
 
-        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
 
-        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
-                /* Clear error bit by writing a 1 */
-                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
-                return -1;
-        }
+	if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+		/* Clear error bit by writing a 1 */
+		__raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+		return -1;
+	}
 
 	return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
 }
 
 static int xicor_write(uint8_t addr, int b)
 {
-        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
 
 	__raw_writeq(addr, SMB_CSR(R_SMB_CMD));
 	__raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
 	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
 		     SMB_CSR(R_SMB_START));
 
-        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
 
-        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
-                /* Clear error bit by writing a 1 */
-                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
-                return -1;
-        } else {
+	if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+		/* Clear error bit by writing a 1 */
+		__raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+		return -1;
+	} else {
 		return 0;
 	}
 }
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index e05ad4d..dd0ab98 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -41,17 +41,17 @@
 };
 
 static struct resource a20r_ds1216_rsrc[] = {
-        {
-                .start = 0x1c081ffc,
-                .end   = 0x1c081fff,
-                .flags = IORESOURCE_MEM
-        }
+	{
+		.start = 0x1c081ffc,
+		.end   = 0x1c081fff,
+		.flags = IORESOURCE_MEM
+	}
 };
 
 static struct platform_device a20r_ds1216_device = {
-        .name           = "rtc-ds1216",
-        .num_resources  = ARRAY_SIZE(a20r_ds1216_rsrc),
-        .resource       = a20r_ds1216_rsrc
+	.name		= "rtc-ds1216",
+	.num_resources	= ARRAY_SIZE(a20r_ds1216_rsrc),
+	.resource	= a20r_ds1216_rsrc
 };
 
 static struct resource snirm_82596_rsrc[] = {
@@ -76,14 +76,14 @@
 		.flags = IORESOURCE_IRQ
 	},
 	{
-		.flags = 0x01                /* 16bit mpu port access */
+		.flags = 0x01		     /* 16bit mpu port access */
 	}
 };
 
 static struct platform_device snirm_82596_pdev = {
-	.name           = "snirm_82596",
-	.num_resources  = ARRAY_SIZE(snirm_82596_rsrc),
-	.resource       = snirm_82596_rsrc
+	.name		= "snirm_82596",
+	.num_resources	= ARRAY_SIZE(snirm_82596_rsrc),
+	.resource	= snirm_82596_rsrc
 };
 
 static struct resource snirm_53c710_rsrc[] = {
@@ -100,9 +100,9 @@
 };
 
 static struct platform_device snirm_53c710_pdev = {
-	.name           = "snirm_53c710",
-	.num_resources  = ARRAY_SIZE(snirm_53c710_rsrc),
-	.resource       = snirm_53c710_rsrc
+	.name		= "snirm_53c710",
+	.num_resources	= ARRAY_SIZE(snirm_53c710_rsrc),
+	.resource	= snirm_53c710_rsrc
 };
 
 static struct resource sc26xx_rsrc[] = {
@@ -171,7 +171,7 @@
 	"	addiu	%1, -1			\n"
 	"	sw	$1, 0(%0)		\n"
 	"	sync				\n"
-		".set   pop			\n"
+		".set	pop			\n"
 	:
 	: "Jr" (PCIMT_UCONF), "Jr" (0xbc000000));
 	write_c0_status(status);
@@ -236,13 +236,13 @@
 	switch (sni_brd_type) {
 	case SNI_BRD_TOWER_OASIC:
 	case SNI_BRD_MINITOWER:
-	        platform_device_register(&snirm_82596_pdev);
-	        platform_device_register(&snirm_53c710_pdev);
-	        platform_device_register(&sc26xx_pdev);
-	        platform_device_register(&a20r_serial8250_device);
-	        platform_device_register(&a20r_ds1216_device);
+		platform_device_register(&snirm_82596_pdev);
+		platform_device_register(&snirm_53c710_pdev);
+		platform_device_register(&sc26xx_pdev);
+		platform_device_register(&a20r_serial8250_device);
+		platform_device_register(&a20r_ds1216_device);
 		sni_eisa_root_init();
-	        break;
+		break;
 	}
 	return 0;
 }
diff --git a/arch/mips/sni/eisa.c b/arch/mips/sni/eisa.c
index 6827feb..179b5d5 100644
--- a/arch/mips/sni/eisa.c
+++ b/arch/mips/sni/eisa.c
@@ -22,7 +22,7 @@
 };
 
 static struct eisa_root_device eisa_bus_root = {
-	.dev           = &eisa_root_dev.dev,
+	.dev	       = &eisa_root_dev.dev,
 	.bus_base_addr = 0,
 	.res	       = &ioport_resource,
 	.slots	       = EISA_MAX_SLOTS,
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 5a4ec753..ac61b90 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -58,25 +58,25 @@
 	case SNI_BRD_10NEW:
 	case SNI_BRD_TOWER_OASIC:
 	case SNI_BRD_MINITOWER:
-	        sni_a20r_irq_init();
-	        break;
+		sni_a20r_irq_init();
+		break;
 
 	case SNI_BRD_PCI_TOWER:
-	        sni_pcit_irq_init();
-	        break;
+		sni_pcit_irq_init();
+		break;
 
 	case SNI_BRD_PCI_TOWER_CPLUS:
-	        sni_pcit_cplus_irq_init();
-	        break;
+		sni_pcit_cplus_irq_init();
+		break;
 
 	case SNI_BRD_RM200:
-	        sni_rm200_irq_init();
-	        break;
+		sni_rm200_irq_init();
+		break;
 
 	case SNI_BRD_PCI_MTOWER:
 	case SNI_BRD_PCI_DESKTOP:
 	case SNI_BRD_PCI_MTOWER_CPLUS:
-	        sni_pcimt_irq_init();
-	        break;
+		sni_pcimt_irq_init();
+		break;
 	}
 }
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
index cdb1417..cec4b8c 100644
--- a/arch/mips/sni/pcimt.c
+++ b/arch/mips/sni/pcimt.c
@@ -60,7 +60,7 @@
 	p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300");
 	if ((csmsr & 0x80) == 0)
 		p += sprintf(p, ", board revision %s",
-		             (csmsr & 0x20) ? "D" : "C");
+			     (csmsr & 0x20) ? "D" : "C");
 	asic = csmsr & 0x80;
 	asic = (csmsr & 0x08) ? asic : !asic;
 	p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1");
@@ -91,22 +91,22 @@
 };
 
 static struct resource pcimt_cmos_rsrc[] = {
-        {
-                .start = 0x70,
-                .end   = 0x71,
-                .flags = IORESOURCE_IO
-        },
-        {
-                .start = 8,
-                .end   = 8,
-                .flags = IORESOURCE_IRQ
-        }
+	{
+		.start = 0x70,
+		.end   = 0x71,
+		.flags = IORESOURCE_IO
+	},
+	{
+		.start = 8,
+		.end   = 8,
+		.flags = IORESOURCE_IRQ
+	}
 };
 
 static struct platform_device pcimt_cmos_device = {
-        .name           = "rtc_cmos",
-        .num_resources  = ARRAY_SIZE(pcimt_cmos_rsrc),
-        .resource       = pcimt_cmos_rsrc
+	.name		= "rtc_cmos",
+	.num_resources	= ARRAY_SIZE(pcimt_cmos_rsrc),
+	.resource	= pcimt_cmos_rsrc
 };
 
 
@@ -191,7 +191,7 @@
 	.mem_offset	= 0x00000000UL,
 	.io_resource	= &sni_io_resource,
 	.io_offset	= 0x00000000UL,
-	.io_map_base    = SNI_PORT_BASE
+	.io_map_base	= SNI_PORT_BASE
 };
 
 static void enable_pcimt_irq(struct irq_data *d)
@@ -319,9 +319,9 @@
 	case SNI_BRD_PCI_MTOWER:
 	case SNI_BRD_PCI_DESKTOP:
 	case SNI_BRD_PCI_MTOWER_CPLUS:
-	        platform_device_register(&pcimt_serial8250_device);
-	        platform_device_register(&pcimt_cmos_device);
-	        break;
+		platform_device_register(&pcimt_serial8250_device);
+		platform_device_register(&pcimt_cmos_device);
+		break;
 	}
 
 	return 0;
diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
index b524637..7cddd03 100644
--- a/arch/mips/sni/pcit.c
+++ b/arch/mips/sni/pcit.c
@@ -59,22 +59,22 @@
 };
 
 static struct resource pcit_cmos_rsrc[] = {
-        {
-                .start = 0x70,
-                .end   = 0x71,
-                .flags = IORESOURCE_IO
-        },
-        {
-                .start = 8,
-                .end   = 8,
-                .flags = IORESOURCE_IRQ
-        }
+	{
+		.start = 0x70,
+		.end   = 0x71,
+		.flags = IORESOURCE_IO
+	},
+	{
+		.start = 8,
+		.end   = 8,
+		.flags = IORESOURCE_IRQ
+	}
 };
 
 static struct platform_device pcit_cmos_device = {
-        .name           = "rtc_cmos",
-        .num_resources  = ARRAY_SIZE(pcit_cmos_rsrc),
-        .resource       = pcit_cmos_rsrc
+	.name		= "rtc_cmos",
+	.num_resources	= ARRAY_SIZE(pcit_cmos_rsrc),
+	.resource	= pcit_cmos_rsrc
 };
 
 static struct platform_device pcit_pcspeaker_pdev = {
@@ -153,7 +153,7 @@
 	.mem_offset	= 0x00000000UL,
 	.io_resource	= &sni_io_resource,
 	.io_offset	= 0x00000000UL,
-	.io_map_base    = SNI_PORT_BASE
+	.io_map_base	= SNI_PORT_BASE
 };
 
 static void enable_pcit_irq(struct irq_data *d)
@@ -272,16 +272,16 @@
 {
 	switch (sni_brd_type) {
 	case SNI_BRD_PCI_TOWER:
-	        platform_device_register(&pcit_serial8250_device);
-	        platform_device_register(&pcit_cmos_device);
+		platform_device_register(&pcit_serial8250_device);
+		platform_device_register(&pcit_cmos_device);
 		platform_device_register(&pcit_pcspeaker_pdev);
-	        break;
+		break;
 
 	case SNI_BRD_PCI_TOWER_CPLUS:
-	        platform_device_register(&pcit_cplus_serial8250_device);
-	        platform_device_register(&pcit_cmos_device);
+		platform_device_register(&pcit_cplus_serial8250_device);
+		platform_device_register(&pcit_cmos_device);
 		platform_device_register(&pcit_pcspeaker_pdev);
-	        break;
+		break;
 	}
 	return 0;
 }
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
index 3ab5b5d..a046b30 100644
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@@ -48,17 +48,17 @@
 };
 
 static struct resource rm200_ds1216_rsrc[] = {
-        {
-                .start = 0x1cd41ffc,
-                .end   = 0x1cd41fff,
-                .flags = IORESOURCE_MEM
-        }
+	{
+		.start = 0x1cd41ffc,
+		.end   = 0x1cd41fff,
+		.flags = IORESOURCE_MEM
+	}
 };
 
 static struct platform_device rm200_ds1216_device = {
-        .name           = "rtc-ds1216",
-        .num_resources  = ARRAY_SIZE(rm200_ds1216_rsrc),
-        .resource       = rm200_ds1216_rsrc
+	.name		= "rtc-ds1216",
+	.num_resources	= ARRAY_SIZE(rm200_ds1216_rsrc),
+	.resource	= rm200_ds1216_rsrc
 };
 
 static struct resource snirm_82596_rm200_rsrc[] = {
@@ -88,9 +88,9 @@
 };
 
 static struct platform_device snirm_82596_rm200_pdev = {
-	.name           = "snirm_82596",
-	.num_resources  = ARRAY_SIZE(snirm_82596_rm200_rsrc),
-	.resource       = snirm_82596_rm200_rsrc
+	.name		= "snirm_82596",
+	.num_resources	= ARRAY_SIZE(snirm_82596_rm200_rsrc),
+	.resource	= snirm_82596_rm200_rsrc
 };
 
 static struct resource snirm_53c710_rm200_rsrc[] = {
@@ -107,9 +107,9 @@
 };
 
 static struct platform_device snirm_53c710_rm200_pdev = {
-	.name           = "snirm_53c710",
-	.num_resources  = ARRAY_SIZE(snirm_53c710_rm200_rsrc),
-	.resource       = snirm_53c710_rm200_rsrc
+	.name		= "snirm_53c710",
+	.num_resources	= ARRAY_SIZE(snirm_53c710_rm200_rsrc),
+	.resource	= snirm_53c710_rm200_rsrc
 };
 
 static int __init snirm_setup_devinit(void)
@@ -134,9 +134,9 @@
  */
 
 static DEFINE_RAW_SPINLOCK(sni_rm200_i8259A_lock);
-#define PIC_CMD    0x00
-#define PIC_IMR    0x01
-#define PIC_ISR    PIC_CMD
+#define PIC_CMD	   0x00
+#define PIC_IMR	   0x01
+#define PIC_ISR	   PIC_CMD
 #define PIC_POLL   PIC_ISR
 #define PIC_OCW3   PIC_ISR
 
@@ -421,8 +421,8 @@
 }
 
 
-#define SNI_RM200_INT_STAT_REG  CKSEG1ADDR(0xbc000000)
-#define SNI_RM200_INT_ENA_REG   CKSEG1ADDR(0xbc080000)
+#define SNI_RM200_INT_STAT_REG	CKSEG1ADDR(0xbc000000)
+#define SNI_RM200_INT_ENA_REG	CKSEG1ADDR(0xbc080000)
 
 #define SNI_RM200_INT_START  24
 #define SNI_RM200_INT_END    28
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 2e9c283..5b09b35 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -204,23 +204,23 @@
 	case SNI_BRD_10NEW:
 	case SNI_BRD_TOWER_OASIC:
 	case SNI_BRD_MINITOWER:
-	        sni_a20r_init();
-	        break;
+		sni_a20r_init();
+		break;
 
 	case SNI_BRD_PCI_TOWER:
 	case SNI_BRD_PCI_TOWER_CPLUS:
-	        sni_pcit_init();
+		sni_pcit_init();
 		break;
 
 	case SNI_BRD_RM200:
-	        sni_rm200_init();
-	        break;
+		sni_rm200_init();
+		break;
 
 	case SNI_BRD_PCI_MTOWER:
 	case SNI_BRD_PCI_DESKTOP:
 	case SNI_BRD_PCI_MTOWER_CPLUS:
-	        sni_pcimt_init();
-	        break;
+		sni_pcimt_init();
+		break;
 	}
 
 	_machine_restart = sni_machine_restart;
@@ -247,16 +247,16 @@
 	 */
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	if ((cmd & (PCI_COMMAND_IO|PCI_COMMAND_MEMORY))
-	        == (PCI_COMMAND_IO|PCI_COMMAND_MEMORY)) {
-		vga_wseq(NULL, CL_SEQR6, 0x12);	/* unlock all extension registers */
+		== (PCI_COMMAND_IO|PCI_COMMAND_MEMORY)) {
+		vga_wseq(NULL, CL_SEQR6, 0x12); /* unlock all extension registers */
 		vga_wseq(NULL, CL_SEQRF, 0x18);
 	}
 }
 
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5434_8,
-                        quirk_cirrus_ram_size);
+			quirk_cirrus_ram_size);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5436,
-                        quirk_cirrus_ram_size);
+			quirk_cirrus_ram_size);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5446,
-                        quirk_cirrus_ram_size);
+			quirk_cirrus_ram_size);
 #endif
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index 494c9e7..cf8ec56 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -10,12 +10,12 @@
 #include <asm/time.h>
 #include <asm-generic/rtc.h>
 
-#define SNI_CLOCK_TICK_RATE     3686400
-#define SNI_COUNTER2_DIV        64
-#define SNI_COUNTER0_DIV        ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
+#define SNI_CLOCK_TICK_RATE	3686400
+#define SNI_COUNTER2_DIV	64
+#define SNI_COUNTER0_DIV	((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
 
 static void a20r_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
+			  struct clock_event_device *evt)
 {
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
@@ -33,14 +33,14 @@
 		*(volatile u8 *)(A20R_PT_CLOCK_BASE +  8) = SNI_COUNTER2_DIV >> 8;
 		wmb();
 
-                break;
-        case CLOCK_EVT_MODE_ONESHOT:
-        case CLOCK_EVT_MODE_UNUSED:
-        case CLOCK_EVT_MODE_SHUTDOWN:
-                break;
-        case CLOCK_EVT_MODE_RESUME:
-                break;
-        }
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
 }
 
 static struct clock_event_device a20r_clockevent_device = {
@@ -82,15 +82,15 @@
 	struct irqaction *action = &a20r_irqaction;
 	unsigned int cpu = smp_processor_id();
 
-	cd->cpumask             = cpumask_of(cpu);
+	cd->cpumask		= cpumask_of(cpu);
 	clockevents_register_device(cd);
 	action->dev_id = cd;
 	setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction);
 }
 
-#define SNI_8254_TICK_RATE        1193182UL
+#define SNI_8254_TICK_RATE	  1193182UL
 
-#define SNI_8254_TCSAMP_COUNTER   ((SNI_8254_TICK_RATE / HZ) + 255)
+#define SNI_8254_TCSAMP_COUNTER	  ((SNI_8254_TICK_RATE / HZ) + 255)
 
 static __init unsigned long dosample(void)
 {
diff --git a/arch/mips/txx9/Platform b/arch/mips/txx9/Platform
index a801abb..a176d1fd 100644
--- a/arch/mips/txx9/Platform
+++ b/arch/mips/txx9/Platform
@@ -6,5 +6,5 @@
 cflags-$(CONFIG_MACH_TX49XX)	+=					\
 		 -I$(srctree)/arch/mips/include/asm/mach-tx49xx
 
-load-$(CONFIG_MACH_TX39XX)      += 0xffffffff80050000
-load-$(CONFIG_MACH_TX49XX)      += 0xffffffff80100000
+load-$(CONFIG_MACH_TX39XX)	+= 0xffffffff80050000
+load-$(CONFIG_MACH_TX49XX)	+= 0xffffffff80100000
diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c
index 7e3ac57..ed8e702 100644
--- a/arch/mips/txx9/generic/irq_tx4927.c
+++ b/arch/mips/txx9/generic/irq_tx4927.c
@@ -2,7 +2,7 @@
  * Common tx4927 irq handler
  *
  * Author: MontaVista Software, Inc.
- *         source@mvista.com
+ *	   source@mvista.com
  *
  *  under the terms of the GNU General Public License as published by the
  *  Free Software Foundation; either version 2 of the License, or (at your
diff --git a/arch/mips/txx9/generic/irq_tx4939.c b/arch/mips/txx9/generic/irq_tx4939.c
index 6b067db..0d7267e8 100644
--- a/arch/mips/txx9/generic/irq_tx4939.c
+++ b/arch/mips/txx9/generic/irq_tx4939.c
@@ -5,8 +5,8 @@
  *
  * Copyright 2001, 2003-2005 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
- *         ahennessy@mvista.com
- *         source@mvista.com
+ *	   ahennessy@mvista.com
+ *	   source@mvista.com
  * Copyright (C) 2000-2001,2005-2007 Toshiba Corporation
  *
  * This file is subject to the terms and conditions of the GNU General Public
diff --git a/arch/mips/txx9/generic/mem_tx4927.c b/arch/mips/txx9/generic/mem_tx4927.c
index 70f9626..deea2ce 100644
--- a/arch/mips/txx9/generic/mem_tx4927.c
+++ b/arch/mips/txx9/generic/mem_tx4927.c
@@ -2,7 +2,7 @@
  * common tx4927 memory interface
  *
  * Author: MontaVista Software, Inc.
- *         source@mvista.com
+ *	   source@mvista.com
  *
  * Copyright 2001-2002 MontaVista Software Inc.
  *
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index ce8f8b9..2871327 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -2,7 +2,7 @@
  * linux/arch/mips/txx9/pci.c
  *
  * Based on linux/arch/mips/txx9/rbtx4927/setup.c,
- *          linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    linux/arch/mips/txx9/rbtx4938/setup.c,
  *	    and RBTX49xx patch from CELF patch archive.
  *
  * Copyright 2001-2005 MontaVista Software Inc.
@@ -107,7 +107,7 @@
 
 /*
  * allocate pci_controller and resources.
- * mem_base, io_base: physical address.  0 for auto assignment.
+ * mem_base, io_base: physical address.	 0 for auto assignment.
  * mem_size and io_size means max size on auto assignment.
  * pcic must be &txx9_primary_pcic or NULL.
  */
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 560fe899..5524f2c 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -513,19 +513,19 @@
 }
 
 #ifdef CONFIG_EARLY_PRINTK
-static void __init null_prom_putchar(char c)
+static void null_prom_putchar(char c)
 {
 }
-void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar;
+void (*txx9_prom_putchar)(char c) = null_prom_putchar;
 
-void __init prom_putchar(char c)
+void prom_putchar(char c)
 {
 	txx9_prom_putchar(c);
 }
 
 static void __iomem *early_txx9_sio_port;
 
-static void __init early_txx9_sio_putchar(char c)
+static void early_txx9_sio_putchar(char c)
 {
 #define TXX9_SICISR	0x0c
 #define TXX9_SITFIFO	0x1c
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
index 9505d58..110e05c 100644
--- a/arch/mips/txx9/generic/setup_tx3927.c
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -132,6 +132,6 @@
 	unsigned long size = txx9_ce_res[ch].end - start + 1;
 
 	if (!(tx3927_romcptr->cr[ch] & 0x8))
-		return;	/* disabled */
+		return; /* disabled */
 	txx9_physmap_flash_init(ch, start, size, &pdata);
 }
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index 3418b2a..e714d6c 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -250,7 +250,7 @@
 	unsigned long size = txx9_ce_res[ch].end - start + 1;
 
 	if (!(TX4927_EBUSC_CR(ch) & 0x8))
-		return;	/* disabled */
+		return; /* disabled */
 	txx9_physmap_flash_init(ch, start, size, &pdata);
 }
 
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index eb20801..0a3bf2d 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -329,7 +329,7 @@
 	unsigned long size = txx9_ce_res[ch].end - start + 1;
 
 	if (!(TX4938_EBUSC_CR(ch) & 0x8))
-		return;	/* disabled */
+		return; /* disabled */
 	txx9_physmap_flash_init(ch, start, size, &pdata);
 }
 
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index 5ff7a95..729a509 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -301,7 +301,7 @@
 	unsigned int ch_mask = 0;
 	__u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg);
 
-	cts_mask |= ~1;	/* only SIO0 have RTS/CTS */
+	cts_mask |= ~1; /* only SIO0 have RTS/CTS */
 	if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO0)
 		cts_mask |= 1 << 0; /* disable SIO0 RTS/CTS by PCFG setting */
 	if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO2)
@@ -378,7 +378,7 @@
 	unsigned long size = txx9_ce_res[ch].end - start + 1;
 
 	if (!(TX4939_EBUSC_CR(ch) & 0x8))
-		return;	/* disabled */
+		return; /* disabled */
 	txx9_physmap_flash_init(ch, start, size, &pdata);
 }
 
diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index 8ebc384..f98baa6 100644
--- a/arch/mips/txx9/generic/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -18,40 +18,40 @@
 /* Common Registers */
 #define SMSC_FDC37M81X_CONFIG_INDEX  0x00
 #define SMSC_FDC37M81X_CONFIG_DATA   0x01
-#define SMSC_FDC37M81X_CONF          0x02
-#define SMSC_FDC37M81X_INDEX         0x03
-#define SMSC_FDC37M81X_DNUM          0x07
-#define SMSC_FDC37M81X_DID           0x20
-#define SMSC_FDC37M81X_DREV          0x21
-#define SMSC_FDC37M81X_PCNT          0x22
-#define SMSC_FDC37M81X_PMGT          0x23
-#define SMSC_FDC37M81X_OSC           0x24
-#define SMSC_FDC37M81X_CONFPA0       0x26
-#define SMSC_FDC37M81X_CONFPA1       0x27
-#define SMSC_FDC37M81X_TEST4         0x2B
-#define SMSC_FDC37M81X_TEST5         0x2C
-#define SMSC_FDC37M81X_TEST1         0x2D
-#define SMSC_FDC37M81X_TEST2         0x2E
-#define SMSC_FDC37M81X_TEST3         0x2F
+#define SMSC_FDC37M81X_CONF	     0x02
+#define SMSC_FDC37M81X_INDEX	     0x03
+#define SMSC_FDC37M81X_DNUM	     0x07
+#define SMSC_FDC37M81X_DID	     0x20
+#define SMSC_FDC37M81X_DREV	     0x21
+#define SMSC_FDC37M81X_PCNT	     0x22
+#define SMSC_FDC37M81X_PMGT	     0x23
+#define SMSC_FDC37M81X_OSC	     0x24
+#define SMSC_FDC37M81X_CONFPA0	     0x26
+#define SMSC_FDC37M81X_CONFPA1	     0x27
+#define SMSC_FDC37M81X_TEST4	     0x2B
+#define SMSC_FDC37M81X_TEST5	     0x2C
+#define SMSC_FDC37M81X_TEST1	     0x2D
+#define SMSC_FDC37M81X_TEST2	     0x2E
+#define SMSC_FDC37M81X_TEST3	     0x2F
 
 /* Logical device numbers */
-#define SMSC_FDC37M81X_FDD           0x00
-#define SMSC_FDC37M81X_SERIAL1       0x04
-#define SMSC_FDC37M81X_SERIAL2       0x05
-#define SMSC_FDC37M81X_KBD           0x07
+#define SMSC_FDC37M81X_FDD	     0x00
+#define SMSC_FDC37M81X_SERIAL1	     0x04
+#define SMSC_FDC37M81X_SERIAL2	     0x05
+#define SMSC_FDC37M81X_KBD	     0x07
 
 /* Logical device Config Registers */
-#define SMSC_FDC37M81X_ACTIVE        0x30
+#define SMSC_FDC37M81X_ACTIVE	     0x30
 #define SMSC_FDC37M81X_BASEADDR0     0x60
 #define SMSC_FDC37M81X_BASEADDR1     0x61
-#define SMSC_FDC37M81X_INT           0x70
-#define SMSC_FDC37M81X_INT2          0x72
-#define SMSC_FDC37M81X_MODE          0xF0
+#define SMSC_FDC37M81X_INT	     0x70
+#define SMSC_FDC37M81X_INT2	     0x72
+#define SMSC_FDC37M81X_MODE	     0xF0
 
 /* Chip Config Values */
 #define SMSC_FDC37M81X_CONFIG_ENTER  0x55
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
-#define SMSC_FDC37M81X_CHIP_ID       0x4d
+#define SMSC_FDC37M81X_CHIP_ID	     0x4d
 
 static unsigned long g_smsc_fdc37m81x_base;
 
diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c
index 6c22c49..3f48292 100644
--- a/arch/mips/txx9/rbtx4927/irq.c
+++ b/arch/mips/txx9/rbtx4927/irq.c
@@ -2,7 +2,7 @@
  * Toshiba RBTX4927 specific interrupt handlers
  *
  * Author: MontaVista Software, Inc.
- *         source@mvista.com
+ *	   source@mvista.com
  *
  * Copyright 2001-2002 MontaVista Software Inc.
  *
diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c
index cc97c6a..fe6d0b5 100644
--- a/arch/mips/txx9/rbtx4927/prom.c
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -2,7 +2,7 @@
  * rbtx4927 specific prom routines
  *
  * Author: MontaVista Software, Inc.
- *         source@mvista.com
+ *	   source@mvista.com
  *
  * Copyright 2001-2002 MontaVista Software Inc.
  *
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index b15adfc..3c516ef 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -2,7 +2,7 @@
  * Toshiba rbtx4927 specific setup
  *
  * Author: MontaVista Software, Inc.
- *         source@mvista.com
+ *	   source@mvista.com
  *
  * Copyright 2001-2002 MontaVista Software Inc.
  *
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index d6e70da..c9afd05 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -107,10 +107,10 @@
 /* SPI support */
 
 /* chip select for SPI devices */
-#define	SEEPROM1_CS	7	/* PIO7 */
-#define	SEEPROM2_CS	0	/* IOC */
-#define	SEEPROM3_CS	1	/* IOC */
-#define	SRTC_CS	2	/* IOC */
+#define SEEPROM1_CS	7	/* PIO7 */
+#define SEEPROM2_CS	0	/* IOC */
+#define SEEPROM3_CS	1	/* IOC */
+#define SRTC_CS 2	/* IOC */
 #define SPI_BUSNO	0
 
 static int __init rbtx4938_ethaddr_init(void)
diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index e15641d..2da5f25 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -243,7 +243,7 @@
 }
 
 static struct platform_driver rbtx4939_led_driver = {
-	.driver  = {
+	.driver	 = {
 		.name = "rbtx4939-led",
 		.owner = THIS_MODULE,
 	},
@@ -337,7 +337,7 @@
 		shift = bdipsw & 3;
 		while (len) {
 			curlen = min_t(unsigned long, len,
-				     0x400000 -	(from & (0x400000 - 1)));
+				     0x400000 - (from & (0x400000 - 1)));
 			memcpy(to,
 			       (void *)((from & ~0xc00000) |
 					((((from >> 22) + shift) & 3) << 22)),
diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c
index 6346c59..ff7d1c6 100644
--- a/arch/mips/vr41xx/common/bcu.c
+++ b/arch/mips/vr41xx/common/bcu.c
@@ -1,7 +1,7 @@
 /*
  *  bcu.c, Bus Control Unit routines for the NEC VR4100 series.
  *
- *  Copyright (C) 2002  MontaVista Software Inc.
+ *  Copyright (C) 2002	MontaVista Software Inc.
  *    Author: Yoichi Yuasa <source@mvista.com>
  *  Copyright (C) 2003-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
@@ -176,7 +176,7 @@
 }
 
 static inline unsigned long calculate_tclock(uint16_t clkspeed, unsigned long pclock,
-                                             unsigned long vtclock)
+					     unsigned long vtclock)
 {
 	unsigned long tclock = 0;
 
diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c
index 8ba7d04..05302bf 100644
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@@ -217,24 +217,24 @@
 	unsigned long start, size;
 
 	switch (current_cpu_type()) {
-        case CPU_VR4111:
-        case CPU_VR4121:
+	case CPU_VR4111:
+	case CPU_VR4121:
 		start = CMU_TYPE1_BASE;
 		size = CMU_TYPE1_SIZE;
-                break;
-        case CPU_VR4122:
-        case CPU_VR4131:
+		break;
+	case CPU_VR4122:
+	case CPU_VR4131:
 		start = CMU_TYPE2_BASE;
 		size = CMU_TYPE2_SIZE;
 		break;
-        case CPU_VR4133:
+	case CPU_VR4133:
 		start = CMU_TYPE3_BASE;
 		size = CMU_TYPE3_SIZE;
-                break;
+		break;
 	default:
 		panic("Unexpected CPU of NEC VR4100 series");
 		break;
-        }
+	}
 
 	if (request_mem_region(start, size, "CMU") == NULL)
 		return -EBUSY;
diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c
index b32b3bc..32cc8d6 100644
--- a/arch/mips/vr41xx/common/giu.c
+++ b/arch/mips/vr41xx/common/giu.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series GIU platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2007	Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c
index a39ef32..41e873b 100644
--- a/arch/mips/vr41xx/common/icu.c
+++ b/arch/mips/vr41xx/common/icu.c
@@ -49,11 +49,11 @@
 static unsigned char sysint2_assign[16] = {
 	2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
 
-#define ICU1_TYPE1_BASE	0x0b000080UL
-#define ICU2_TYPE1_BASE	0x0b000200UL
+#define ICU1_TYPE1_BASE 0x0b000080UL
+#define ICU2_TYPE1_BASE 0x0b000200UL
 
-#define ICU1_TYPE2_BASE	0x0f000080UL
-#define ICU2_TYPE2_BASE	0x0f0000a0UL
+#define ICU1_TYPE2_BASE 0x0f000080UL
+#define ICU2_TYPE2_BASE 0x0f0000a0UL
 
 #define ICU1_SIZE	0x20
 #define ICU2_SIZE	0x1c
diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
index 9fbf5f0..70a3f90 100644
--- a/arch/mips/vr41xx/common/pmu.c
+++ b/arch/mips/vr41xx/common/pmu.c
@@ -74,7 +74,7 @@
 		change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
 		flush_cache_all();
 		write_c0_wired(0);
-		__asm__("jr     %0"::"r"(0xbfc00000));
+		__asm__("jr	%0"::"r"(0xbfc00000));
 		break;
 	}
 }
diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c
index 76e3e8a..c1e3d20 100644
--- a/arch/mips/vr41xx/common/rtc.c
+++ b/arch/mips/vr41xx/common/rtc.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series RTC platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2007	Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/type.c b/arch/mips/vr41xx/common/type.c
index ff84142..45836a9 100644
--- a/arch/mips/vr41xx/common/type.c
+++ b/arch/mips/vr41xx/common/type.c
@@ -1,7 +1,7 @@
 /*
  *  type.c, System type for NEC VR4100 series.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2005	Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/wrppmc/Platform b/arch/mips/wrppmc/Platform
index e758645..dc78b25 100644
--- a/arch/mips/wrppmc/Platform
+++ b/arch/mips/wrppmc/Platform
@@ -2,6 +2,6 @@
 # Wind River PPMC Board (4KC + GT64120)
 #
 platform-$(CONFIG_WR_PPMC)	+= wrppmc/
-cflags-$(CONFIG_WR_PPMC)	+= 					\
+cflags-$(CONFIG_WR_PPMC)	+=					\
 		-I$(srctree)/arch/mips/include/asm/mach-wrppmc
 load-$(CONFIG_WR_PPMC)		+= 0xffffffff80100000
diff --git a/arch/mips/wrppmc/irq.c b/arch/mips/wrppmc/irq.c
index c6e7062..f237bf4 100644
--- a/arch/mips/wrppmc/irq.c
+++ b/arch/mips/wrppmc/irq.c
@@ -4,8 +4,8 @@
  * Copyright (C) 2006, Wind River System Inc.
  * Author: Rongkai.Zhan, <rongkai.zhan@windriver.com>
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
diff --git a/arch/mips/wrppmc/serial.c b/arch/mips/wrppmc/serial.c
index 6f9d085..83f0f7d 100644
--- a/arch/mips/wrppmc/serial.c
+++ b/arch/mips/wrppmc/serial.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of WRPPMC UART platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2007	Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index e06d7824..6a11805 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -14,7 +14,7 @@
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
 
 /* 10 parts were found on sflash on Netgear WNDR4500 */
 #define BCM47XXPART_MAX_PARTS		12
diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index a7efec2..9b017d9 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -381,7 +381,7 @@
 }
 
 #ifdef CONFIG_BCM47XX
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
 static void b44_wap54g10_workaround(struct b44 *bp)
 {
 	char buf[20];
@@ -393,7 +393,7 @@
 	 * see https://dev.openwrt.org/ticket/146
 	 * check and reset bit "isolate"
 	 */
-	if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
+	if (bcm47xx_nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
 		return;
 	if (simple_strtoul(buf, NULL, 0) == 2) {
 		err = __b44_readphy(bp, 0, MII_BMCR, &val);
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index bf985c0..639049d 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -15,7 +15,7 @@
 #include <linux/mii.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
 
 static const struct bcma_device_id bgmac_bcma_tbl[] = {
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
@@ -908,7 +908,7 @@
 			     BGMAC_CHIPCTL_1_IF_TYPE_RMII;
 		char buf[2];
 
-		if (nvram_getenv("et_swtype", buf, 1) > 0) {
+		if (bcm47xx_nvram_getenv("et_swtype", buf, 1) > 0) {
 			if (kstrtou8(buf, 0, &et_swtype))
 				bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n",
 					  buf);
@@ -1386,7 +1386,7 @@
 	}
 
 	bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
-	if (nvram_getenv("et0_no_txint", NULL, 0) == 0)
+	if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0)
 		bgmac->int_mask &= ~BGMAC_IS_TX_MASK;
 
 	/* TODO: reset the external phy. Specs are needed */
diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c
index a43415a..4c0f6d8 100644
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -14,7 +14,7 @@
 #include <linux/delay.h>
 #include <linux/export.h>
 #ifdef CONFIG_BCM47XX
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
 #endif
 
 #include "ssb_private.h"
@@ -322,7 +322,7 @@
 	if (bus->bustype == SSB_BUSTYPE_SSB) {
 #ifdef CONFIG_BCM47XX
 		char buf[20];
-		if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
+		if (bcm47xx_nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
 			crystalfreq = simple_strtoul(buf, NULL, 0);
 #endif
 	}
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a0162cb..cf9210d 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -729,19 +729,19 @@
 
 config SERIAL_PNX8XXX
 	bool "Enable PNX8XXX SoCs' UART Support"
-	depends on SOC_PNX8550 || SOC_PNX833X
+	depends on SOC_PNX833X
 	select SERIAL_CORE
 	help
-	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
-	  and you want to use serial ports, say Y.  Otherwise, say N.
+	  If you have a MIPS-based Philips SoC such as PNX8330 and you want
+	  to use serial ports, say Y.  Otherwise, say N.
 
 config SERIAL_PNX8XXX_CONSOLE
 	bool "Enable PNX8XX0 serial console"
 	depends on SERIAL_PNX8XXX
 	select SERIAL_CORE_CONSOLE
 	help
-	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
-	  and you want to use serial console, say Y. Otherwise, say N.
+	  If you have a MIPS-based Philips SoC such as PNX8330 and you want
+	  to use serial console, say Y. Otherwise, say N.
 
 config SERIAL_HS_LPC32XX
 	tristate "LPC32XX high speed serial port support"