diff --git a/scripts/analyze_suspend.py b/scripts/analyze_suspend.py
index 93e1fd4..a0ba48f 100755
--- a/scripts/analyze_suspend.py
+++ b/scripts/analyze_suspend.py
@@ -19,6 +19,17 @@
 # Authors:
 #	 Todd Brandt <todd.e.brandt@linux.intel.com>
 #
+# Links:
+#	 Home Page
+#	   https://01.org/suspendresume
+#	 Source repo
+#	   https://github.com/01org/suspendresume
+#	 Documentation
+#	   Getting Started
+#	     https://01.org/suspendresume/documentation/getting-started
+#	   Command List:
+#	     https://01.org/suspendresume/documentation/command-list
+#
 # Description:
 #	 This tool is designed to assist kernel and OS developers in optimizing
 #	 their linux stack's suspend/resume time. Using a kernel image built
@@ -35,6 +46,8 @@
 #		 CONFIG_FTRACE=y
 #		 CONFIG_FUNCTION_TRACER=y
 #		 CONFIG_FUNCTION_GRAPH_TRACER=y
+#		 CONFIG_KPROBES=y
+#		 CONFIG_KPROBES_ON_FTRACE=y
 #
 #	 For kernel versions older than 3.15:
 #	 The following additional kernel parameters are required:
@@ -52,6 +65,7 @@
 import platform
 from datetime import datetime
 import struct
+import ConfigParser
 
 # ----------------- CLASSES --------------------
 
@@ -60,8 +74,15 @@
 #	 A global, single-instance container used to
 #	 store system values and test parameters
 class SystemValues:
-	version = 3.0
+	ansi = False
+	version = '4.2'
 	verbose = False
+	addlogs = False
+	mindevlen = 0.001
+	mincglen = 1.0
+	srgap = 0
+	cgexp = False
+	outdir = ''
 	testdir = '.'
 	tpath = '/sys/kernel/debug/tracing/'
 	fpdtpath = '/sys/firmware/acpi/tables/FPDT'
@@ -71,26 +92,21 @@
 		'device_pm_callback_end',
 		'device_pm_callback_start'
 	]
-	modename = {
-		'freeze': 'Suspend-To-Idle (S0)',
-		'standby': 'Power-On Suspend (S1)',
-		'mem': 'Suspend-to-RAM (S3)',
-		'disk': 'Suspend-to-disk (S4)'
-	}
+	testcommand = ''
 	mempath = '/dev/mem'
 	powerfile = '/sys/power/state'
 	suspendmode = 'mem'
 	hostname = 'localhost'
 	prefix = 'test'
 	teststamp = ''
+	dmesgstart = 0.0
 	dmesgfile = ''
 	ftracefile = ''
 	htmlfile = ''
+	embedded = False
 	rtcwake = False
 	rtcwaketime = 10
 	rtcpath = ''
-	android = False
-	adb = 'adb'
 	devicefilter = []
 	stamp = 0
 	execcount = 1
@@ -98,16 +114,90 @@
 	usecallgraph = False
 	usetraceevents = False
 	usetraceeventsonly = False
+	usetracemarkers = True
+	usekprobes = True
+	usedevsrc = False
 	notestrun = False
-	altdevname = dict()
+	devprops = dict()
 	postresumetime = 0
+	devpropfmt = '# Device Properties: .*'
 	tracertypefmt = '# tracer: (?P<t>.*)'
 	firmwarefmt = '# fwsuspend (?P<s>[0-9]*) fwresume (?P<r>[0-9]*)$'
 	postresumefmt = '# post resume time (?P<t>[0-9]*)$'
 	stampfmt = '# suspend-(?P<m>[0-9]{2})(?P<d>[0-9]{2})(?P<y>[0-9]{2})-'+\
 				'(?P<H>[0-9]{2})(?P<M>[0-9]{2})(?P<S>[0-9]{2})'+\
 				' (?P<host>.*) (?P<mode>.*) (?P<kernel>.*)$'
+	kprobecolor = 'rgba(204,204,204,0.5)'
+	synccolor = 'rgba(204,204,204,0.5)'
+	debugfuncs = []
+	tracefuncs = {
+		'sys_sync': dict(),
+		'pm_prepare_console': dict(),
+		'pm_notifier_call_chain': dict(),
+		'freeze_processes': dict(),
+		'freeze_kernel_threads': dict(),
+		'pm_restrict_gfp_mask': dict(),
+		'acpi_suspend_begin': dict(),
+		'suspend_console': dict(),
+		'acpi_pm_prepare': dict(),
+		'syscore_suspend': dict(),
+		'arch_enable_nonboot_cpus_end': dict(),
+		'syscore_resume': dict(),
+		'acpi_pm_finish': dict(),
+		'resume_console': dict(),
+		'acpi_pm_end': dict(),
+		'pm_restore_gfp_mask': dict(),
+		'thaw_processes': dict(),
+		'pm_restore_console': dict(),
+		'CPU_OFF': {
+			'func':'_cpu_down',
+			'args_x86_64': {'cpu':'%di:s32'},
+			'format': 'CPU_OFF[{cpu}]',
+			'mask': 'CPU_.*_DOWN'
+		},
+		'CPU_ON': {
+			'func':'_cpu_up',
+			'args_x86_64': {'cpu':'%di:s32'},
+			'format': 'CPU_ON[{cpu}]',
+			'mask': 'CPU_.*_UP'
+		},
+	}
+	dev_tracefuncs = {
+		# general wait/delay/sleep
+		'msleep': { 'args_x86_64': {'time':'%di:s32'} },
+		'udelay': { 'func':'__const_udelay', 'args_x86_64': {'loops':'%di:s32'} },
+		'acpi_os_stall': dict(),
+		# ACPI
+		'acpi_resume_power_resources': dict(),
+		'acpi_ps_parse_aml': dict(),
+		# filesystem
+		'ext4_sync_fs': dict(),
+		# ATA
+		'ata_eh_recover': { 'args_x86_64': {'port':'+36(%di):s32'} },
+		# i915
+		'i915_gem_restore_gtt_mappings': dict(),
+		'intel_opregion_setup': dict(),
+		'intel_dp_detect': dict(),
+		'intel_hdmi_detect': dict(),
+		'intel_opregion_init': dict(),
+	}
+	kprobes_postresume = [
+		{
+			'name': 'ataportrst',
+			'func': 'ata_eh_recover',
+			'args': {'port':'+36(%di):s32'},
+			'format': 'ata{port}_port_reset',
+			'mask': 'ata.*_port_reset'
+		}
+	]
+	kprobes = dict()
+	timeformat = '%.3f'
 	def __init__(self):
+		# if this is a phoronix test run, set some default options
+		if('LOG_FILE' in os.environ and 'TEST_RESULTS_IDENTIFIER' in os.environ):
+			self.embedded = True
+			self.addlogs = True
+			self.htmlfile = os.environ['LOG_FILE']
 		self.hostname = platform.node()
 		if(self.hostname == ''):
 			self.hostname = 'localhost'
@@ -118,6 +208,12 @@
 		if os.path.exists(rtc) and os.path.exists(rtc+'/date') and \
 			os.path.exists(rtc+'/time') and os.path.exists(rtc+'/wakealarm'):
 			self.rtcpath = rtc
+		if (hasattr(sys.stdout, 'isatty') and sys.stdout.isatty()):
+			self.ansi = True
+	def setPrecision(self, num):
+		if num < 0 or num > 6:
+			return
+		self.timeformat = '%.{0}f'.format(num)
 	def setOutputFile(self):
 		if((self.htmlfile == '') and (self.dmesgfile != '')):
 			m = re.match('(?P<name>.*)_dmesg\.txt$', self.dmesgfile)
@@ -129,32 +225,37 @@
 				self.htmlfile = m.group('name')+'.html'
 		if(self.htmlfile == ''):
 			self.htmlfile = 'output.html'
-	def initTestOutput(self, subdir):
-		if(not self.android):
-			self.prefix = self.hostname
-			v = open('/proc/version', 'r').read().strip()
-			kver = string.split(v)[2]
-		else:
-			self.prefix = 'android'
-			v = os.popen(self.adb+' shell cat /proc/version').read().strip()
-			kver = string.split(v)[2]
-		testtime = datetime.now().strftime('suspend-%m%d%y-%H%M%S')
+	def initTestOutput(self, subdir, testpath=''):
+		self.prefix = self.hostname
+		v = open('/proc/version', 'r').read().strip()
+		kver = string.split(v)[2]
+		n = datetime.now()
+		testtime = n.strftime('suspend-%m%d%y-%H%M%S')
+		if not testpath:
+			testpath = n.strftime('suspend-%y%m%d-%H%M%S')
 		if(subdir != "."):
-			self.testdir = subdir+"/"+testtime
+			self.testdir = subdir+"/"+testpath
 		else:
-			self.testdir = testtime
+			self.testdir = testpath
 		self.teststamp = \
 			'# '+testtime+' '+self.prefix+' '+self.suspendmode+' '+kver
+		if(self.embedded):
+			self.dmesgfile = \
+				'/tmp/'+testtime+'_'+self.suspendmode+'_dmesg.txt'
+			self.ftracefile = \
+				'/tmp/'+testtime+'_'+self.suspendmode+'_ftrace.txt'
+			return
 		self.dmesgfile = \
 			self.testdir+'/'+self.prefix+'_'+self.suspendmode+'_dmesg.txt'
 		self.ftracefile = \
 			self.testdir+'/'+self.prefix+'_'+self.suspendmode+'_ftrace.txt'
 		self.htmlfile = \
 			self.testdir+'/'+self.prefix+'_'+self.suspendmode+'.html'
-		os.mkdir(self.testdir)
+		if not os.path.isdir(self.testdir):
+			os.mkdir(self.testdir)
 	def setDeviceFilter(self, devnames):
 		self.devicefilter = string.split(devnames)
-	def rtcWakeAlarm(self):
+	def rtcWakeAlarmOn(self):
 		os.system('echo 0 > '+self.rtcpath+'/wakealarm')
 		outD = open(self.rtcpath+'/date', 'r').read().strip()
 		outT = open(self.rtcpath+'/time', 'r').read().strip()
@@ -172,9 +273,361 @@
 			nowtime = int(datetime.now().strftime('%s'))
 		alarm = nowtime + self.rtcwaketime
 		os.system('echo %d > %s/wakealarm' % (alarm, self.rtcpath))
+	def rtcWakeAlarmOff(self):
+		os.system('echo 0 > %s/wakealarm' % self.rtcpath)
+	def initdmesg(self):
+		# get the latest time stamp from the dmesg log
+		fp = os.popen('dmesg')
+		ktime = '0'
+		for line in fp:
+			line = line.replace('\r\n', '')
+			idx = line.find('[')
+			if idx > 1:
+				line = line[idx:]
+			m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line)
+			if(m):
+				ktime = m.group('ktime')
+		fp.close()
+		self.dmesgstart = float(ktime)
+	def getdmesg(self):
+		# store all new dmesg lines since initdmesg was called
+		fp = os.popen('dmesg')
+		op = open(self.dmesgfile, 'a')
+		for line in fp:
+			line = line.replace('\r\n', '')
+			idx = line.find('[')
+			if idx > 1:
+				line = line[idx:]
+			m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line)
+			if(not m):
+				continue
+			ktime = float(m.group('ktime'))
+			if ktime > self.dmesgstart:
+				op.write(line)
+		fp.close()
+		op.close()
+	def addFtraceFilterFunctions(self, file):
+		fp = open(file)
+		list = fp.read().split('\n')
+		fp.close()
+		for i in list:
+			if len(i) < 2:
+				continue
+			self.tracefuncs[i] = dict()
+	def getFtraceFilterFunctions(self, current):
+		rootCheck(True)
+		if not current:
+			os.system('cat '+self.tpath+'available_filter_functions')
+			return
+		fp = open(self.tpath+'available_filter_functions')
+		master = fp.read().split('\n')
+		fp.close()
+		if len(self.debugfuncs) > 0:
+			for i in self.debugfuncs:
+				if i in master:
+					print i
+				else:
+					print self.colorText(i)
+		else:
+			for i in self.tracefuncs:
+				if 'func' in self.tracefuncs[i]:
+					i = self.tracefuncs[i]['func']
+				if i in master:
+					print i
+				else:
+					print self.colorText(i)
+	def setFtraceFilterFunctions(self, list):
+		fp = open(self.tpath+'available_filter_functions')
+		master = fp.read().split('\n')
+		fp.close()
+		flist = ''
+		for i in list:
+			if i not in master:
+				continue
+			if ' [' in i:
+				flist += i.split(' ')[0]+'\n'
+			else:
+				flist += i+'\n'
+		fp = open(self.tpath+'set_graph_function', 'w')
+		fp.write(flist)
+		fp.close()
+	def kprobeMatch(self, name, target):
+		if name not in self.kprobes:
+			return False
+		if re.match(self.kprobes[name]['mask'], target):
+			return True
+		return False
+	def basicKprobe(self, name):
+		self.kprobes[name] = {'name': name,'func': name,'args': dict(),'format': name,'mask': name}
+	def defaultKprobe(self, name, kdata):
+		k = kdata
+		for field in ['name', 'format', 'mask', 'func']:
+			if field not in k:
+				k[field] = name
+		archargs = 'args_'+platform.machine()
+		if archargs in k:
+			k['args'] = k[archargs]
+		else:
+			k['args'] = dict()
+			k['format'] = name
+		self.kprobes[name] = k
+	def kprobeColor(self, name):
+		if name not in self.kprobes or 'color' not in self.kprobes[name]:
+			return ''
+		return self.kprobes[name]['color']
+	def kprobeDisplayName(self, name, dataraw):
+		if name not in self.kprobes:
+			self.basicKprobe(name)
+		data = ''
+		quote=0
+		# first remvoe any spaces inside quotes, and the quotes
+		for c in dataraw:
+			if c == '"':
+				quote = (quote + 1) % 2
+			if quote and c == ' ':
+				data += '_'
+			elif c != '"':
+				data += c
+		fmt, args = self.kprobes[name]['format'], self.kprobes[name]['args']
+		arglist = dict()
+		# now process the args
+		for arg in sorted(args):
+			arglist[arg] = ''
+			m = re.match('.* '+arg+'=(?P<arg>.*) ', data);
+			if m:
+				arglist[arg] = m.group('arg')
+			else:
+				m = re.match('.* '+arg+'=(?P<arg>.*)', data);
+				if m:
+					arglist[arg] = m.group('arg')
+		out = fmt.format(**arglist)
+		out = out.replace(' ', '_').replace('"', '')
+		return out
+	def kprobeText(self, kprobe):
+		name, fmt, func, args = kprobe['name'], kprobe['format'], kprobe['func'], kprobe['args']
+		if re.findall('{(?P<n>[a-z,A-Z,0-9]*)}', func):
+			doError('Kprobe "%s" has format info in the function name "%s"' % (name, func), False)
+		for arg in re.findall('{(?P<n>[a-z,A-Z,0-9]*)}', fmt):
+			if arg not in args:
+				doError('Kprobe "%s" is missing argument "%s"' % (name, arg), False)
+		val = 'p:%s_cal %s' % (name, func)
+		for i in sorted(args):
+			val += ' %s=%s' % (i, args[i])
+		val += '\nr:%s_ret %s $retval\n' % (name, func)
+		return val
+	def addKprobes(self):
+		# first test each kprobe
+		print('INITIALIZING KPROBES...')
+		rejects = []
+		for name in sorted(self.kprobes):
+			if not self.testKprobe(self.kprobes[name]):
+				rejects.append(name)
+		# remove all failed ones from the list
+		for name in rejects:
+			vprint('Skipping KPROBE: %s' % name)
+			self.kprobes.pop(name)
+		self.fsetVal('', 'kprobe_events')
+		kprobeevents = ''
+		# set the kprobes all at once
+		for kp in self.kprobes:
+			val = self.kprobeText(self.kprobes[kp])
+			vprint('Adding KPROBE: %s\n%s' % (kp, val.strip()))
+			kprobeevents += self.kprobeText(self.kprobes[kp])
+		self.fsetVal(kprobeevents, 'kprobe_events')
+		# verify that the kprobes were set as ordered
+		check = self.fgetVal('kprobe_events')
+		linesout = len(kprobeevents.split('\n'))
+		linesack = len(check.split('\n'))
+		if linesack < linesout:
+			# if not, try appending the kprobes 1 by 1
+			for kp in self.kprobes:
+				kprobeevents = self.kprobeText(self.kprobes[kp])
+				self.fsetVal(kprobeevents, 'kprobe_events', 'a')
+		self.fsetVal('1', 'events/kprobes/enable')
+	def testKprobe(self, kprobe):
+		kprobeevents = self.kprobeText(kprobe)
+		if not kprobeevents:
+			return False
+		try:
+			self.fsetVal(kprobeevents, 'kprobe_events')
+			check = self.fgetVal('kprobe_events')
+		except:
+			return False
+		linesout = len(kprobeevents.split('\n'))
+		linesack = len(check.split('\n'))
+		if linesack < linesout:
+			return False
+		return True
+	def fsetVal(self, val, path, mode='w'):
+		file = self.tpath+path
+		if not os.path.exists(file):
+			return False
+		try:
+			fp = open(file, mode)
+			fp.write(val)
+			fp.close()
+		except:
+			pass
+		return True
+	def fgetVal(self, path):
+		file = self.tpath+path
+		res = ''
+		if not os.path.exists(file):
+			return res
+		try:
+			fp = open(file, 'r')
+			res = fp.read()
+			fp.close()
+		except:
+			pass
+		return res
+	def cleanupFtrace(self):
+		if(self.usecallgraph or self.usetraceevents):
+			self.fsetVal('0', 'events/kprobes/enable')
+			self.fsetVal('', 'kprobe_events')
+	def setupAllKprobes(self):
+		for name in self.tracefuncs:
+			self.defaultKprobe(name, self.tracefuncs[name])
+		for name in self.dev_tracefuncs:
+			self.defaultKprobe(name, self.dev_tracefuncs[name])
+	def isCallgraphFunc(self, name):
+		if len(self.debugfuncs) < 1 and self.suspendmode == 'command':
+			return True
+		if name in self.debugfuncs:
+			return True
+		funclist = []
+		for i in self.tracefuncs:
+			if 'func' in self.tracefuncs[i]:
+				funclist.append(self.tracefuncs[i]['func'])
+			else:
+				funclist.append(i)
+		if name in funclist:
+			return True
+		return False
+	def initFtrace(self, testing=False):
+		tp = self.tpath
+		print('INITIALIZING FTRACE...')
+		# turn trace off
+		self.fsetVal('0', 'tracing_on')
+		self.cleanupFtrace()
+		# set the trace clock to global
+		self.fsetVal('global', 'trace_clock')
+		# set trace buffer to a huge value
+		self.fsetVal('nop', 'current_tracer')
+		self.fsetVal('100000', 'buffer_size_kb')
+		# go no further if this is just a status check
+		if testing:
+			return
+		if self.usekprobes:
+			# add tracefunc kprobes so long as were not using full callgraph
+			if(not self.usecallgraph or len(self.debugfuncs) > 0):
+				for name in self.tracefuncs:
+					self.defaultKprobe(name, self.tracefuncs[name])
+				if self.usedevsrc:
+					for name in self.dev_tracefuncs:
+						self.defaultKprobe(name, self.dev_tracefuncs[name])
+			else:
+				self.usedevsrc = False
+			self.addKprobes()
+		# initialize the callgraph trace, unless this is an x2 run
+		if(self.usecallgraph):
+			# set trace type
+			self.fsetVal('function_graph', 'current_tracer')
+			self.fsetVal('', 'set_ftrace_filter')
+			# set trace format options
+			self.fsetVal('print-parent', 'trace_options')
+			self.fsetVal('funcgraph-abstime', 'trace_options')
+			self.fsetVal('funcgraph-cpu', 'trace_options')
+			self.fsetVal('funcgraph-duration', 'trace_options')
+			self.fsetVal('funcgraph-proc', 'trace_options')
+			self.fsetVal('funcgraph-tail', 'trace_options')
+			self.fsetVal('nofuncgraph-overhead', 'trace_options')
+			self.fsetVal('context-info', 'trace_options')
+			self.fsetVal('graph-time', 'trace_options')
+			self.fsetVal('0', 'max_graph_depth')
+			if len(self.debugfuncs) > 0:
+				self.setFtraceFilterFunctions(self.debugfuncs)
+			elif self.suspendmode == 'command':
+				self.fsetVal('', 'set_graph_function')
+			else:
+				cf = ['dpm_run_callback']
+				if(self.usetraceeventsonly):
+					cf += ['dpm_prepare', 'dpm_complete']
+				for fn in self.tracefuncs:
+					if 'func' in self.tracefuncs[fn]:
+						cf.append(self.tracefuncs[fn]['func'])
+					else:
+						cf.append(fn)
+				self.setFtraceFilterFunctions(cf)
+		if(self.usetraceevents):
+			# turn trace events on
+			events = iter(self.traceevents)
+			for e in events:
+				self.fsetVal('1', 'events/power/'+e+'/enable')
+		# clear the trace buffer
+		self.fsetVal('', 'trace')
+	def verifyFtrace(self):
+		# files needed for any trace data
+		files = ['buffer_size_kb', 'current_tracer', 'trace', 'trace_clock',
+				 'trace_marker', 'trace_options', 'tracing_on']
+		# files needed for callgraph trace data
+		tp = self.tpath
+		if(self.usecallgraph):
+			files += [
+				'available_filter_functions',
+				'set_ftrace_filter',
+				'set_graph_function'
+			]
+		for f in files:
+			if(os.path.exists(tp+f) == False):
+				return False
+		return True
+	def verifyKprobes(self):
+		# files needed for kprobes to work
+		files = ['kprobe_events', 'events']
+		tp = self.tpath
+		for f in files:
+			if(os.path.exists(tp+f) == False):
+				return False
+		return True
+	def colorText(self, str):
+		if not self.ansi:
+			return str
+		return '\x1B[31;40m'+str+'\x1B[m'
 
 sysvals = SystemValues()
 
+# Class: DevProps
+# Description:
+#	 Simple class which holds property values collected
+#	 for all the devices used in the timeline.
+class DevProps:
+	syspath = ''
+	altname = ''
+	async = True
+	xtraclass = ''
+	xtrainfo = ''
+	def out(self, dev):
+		return '%s,%s,%d;' % (dev, self.altname, self.async)
+	def debug(self, dev):
+		print '%s:\n\taltname = %s\n\t  async = %s' % (dev, self.altname, self.async)
+	def altName(self, dev):
+		if not self.altname or self.altname == dev:
+			return dev
+		return '%s [%s]' % (self.altname, dev)
+	def xtraClass(self):
+		if self.xtraclass:
+			return ' '+self.xtraclass
+		if not self.async:
+			return ' sync'
+		return ''
+	def xtraInfo(self):
+		if self.xtraclass:
+			return ' '+self.xtraclass
+		if self.async:
+			return ' async'
+		return ' sync'
+
 # Class: DeviceNode
 # Description:
 #	 A container used to create a device hierachy, with a single root node
@@ -228,6 +681,7 @@
 	html_device_id = 0
 	stamp = 0
 	outfile = ''
+	dev_ubiquitous = ['msleep', 'udelay']
 	def __init__(self, num):
 		idchar = 'abcdefghijklmnopqrstuvwxyz'
 		self.testnumber = num
@@ -257,6 +711,9 @@
 								'row': 0, 'color': '#FFFFCC', 'order': 9}
 		}
 		self.phases = self.sortedPhases()
+		self.devicegroups = []
+		for phase in self.phases:
+			self.devicegroups.append([phase])
 	def getStart(self):
 		return self.dmesg[self.phases[0]]['start']
 	def setStart(self, time):
@@ -273,51 +730,61 @@
 			for dev in list:
 				d = list[dev]
 				if(d['pid'] == pid and time >= d['start'] and
-					time <= d['end']):
+					time < d['end']):
 					return False
 		return True
-	def addIntraDevTraceEvent(self, action, name, pid, time):
-		if(action == 'mutex_lock_try'):
-			color = 'red'
-		elif(action == 'mutex_lock_pass'):
-			color = 'green'
-		elif(action == 'mutex_unlock'):
-			color = 'blue'
-		else:
-			# create separate colors based on the name
-			v1 = len(name)*10 % 256
-			v2 = string.count(name, 'e')*100 % 256
-			v3 = ord(name[0])*20 % 256
-			color = '#%06X' % ((v1*0x10000) + (v2*0x100) + v3)
-		for phase in self.phases:
+	def targetDevice(self, phaselist, start, end, pid=-1):
+		tgtdev = ''
+		for phase in phaselist:
 			list = self.dmesg[phase]['list']
-			for dev in list:
-				d = list[dev]
-				if(d['pid'] == pid and time >= d['start'] and
-					time <= d['end']):
-					e = TraceEvent(action, name, color, time)
-					if('traceevents' not in d):
-						d['traceevents'] = []
-					d['traceevents'].append(e)
-					return d
-					break
-		return 0
-	def capIntraDevTraceEvent(self, action, name, pid, time):
-		for phase in self.phases:
-			list = self.dmesg[phase]['list']
-			for dev in list:
-				d = list[dev]
-				if(d['pid'] == pid and time >= d['start'] and
-					time <= d['end']):
-					if('traceevents' not in d):
-						return
-					for e in d['traceevents']:
-						if(e.action == action and
-							e.name == name and not e.ready):
-							e.length = time - e.time
-							e.ready = True
-							break
-					return
+			for devname in list:
+				dev = list[devname]
+				if(pid >= 0 and dev['pid'] != pid):
+					continue
+				devS = dev['start']
+				devE = dev['end']
+				if(start < devS or start >= devE or end <= devS or end > devE):
+					continue
+				tgtdev = dev
+				break
+		return tgtdev
+	def addDeviceFunctionCall(self, displayname, kprobename, proc, pid, start, end, cdata, rdata):
+		machstart = self.dmesg['suspend_machine']['start']
+		machend = self.dmesg['resume_machine']['end']
+		tgtdev = self.targetDevice(self.phases, start, end, pid)
+		if not tgtdev and start >= machstart and end < machend:
+			# device calls in machine phases should be serial
+			tgtdev = self.targetDevice(['suspend_machine', 'resume_machine'], start, end)
+		if not tgtdev:
+			if 'scsi_eh' in proc:
+				self.newActionGlobal(proc, start, end, pid)
+				self.addDeviceFunctionCall(displayname, kprobename, proc, pid, start, end, cdata, rdata)
+			else:
+				vprint('IGNORE: %s[%s](%d) [%f - %f] | %s | %s | %s' % (displayname, kprobename,
+					pid, start, end, cdata, rdata, proc))
+			return False
+		# detail block fits within tgtdev
+		if('src' not in tgtdev):
+			tgtdev['src'] = []
+		title = cdata+' '+rdata
+		mstr = '\(.*\) *(?P<args>.*) *\((?P<caller>.*)\+.* arg1=(?P<ret>.*)'
+		m = re.match(mstr, title)
+		if m:
+			c = m.group('caller')
+			a = m.group('args').strip()
+			r = m.group('ret')
+			if len(r) > 6:
+				r = ''
+			else:
+				r = 'ret=%s ' % r
+			l = '%0.3fms' % ((end - start) * 1000)
+			if kprobename in self.dev_ubiquitous:
+				title = '%s(%s) <- %s, %s(%s)' % (displayname, a, c, r, l)
+			else:
+				title = '%s(%s) %s(%s)' % (displayname, a, r, l)
+		e = TraceEvent(title, kprobename, start, end - start)
+		tgtdev['src'].append(e)
+		return True
 	def trimTimeVal(self, t, t0, dT, left):
 		if left:
 			if(t > t0):
@@ -353,11 +820,11 @@
 					cg.end = self.trimTimeVal(cg.end, t0, dT, left)
 					for line in cg.list:
 						line.time = self.trimTimeVal(line.time, t0, dT, left)
-				if('traceevents' in d):
-					for e in d['traceevents']:
+				if('src' in d):
+					for e in d['src']:
 						e.time = self.trimTimeVal(e.time, t0, dT, left)
 	def normalizeTime(self, tZero):
-		# first trim out any standby or freeze clock time
+		# trim out any standby or freeze clock time
 		if(self.tSuspended != self.tResumed):
 			if(self.tResumed > tZero):
 				self.trimTime(self.tSuspended, \
@@ -365,29 +832,6 @@
 			else:
 				self.trimTime(self.tSuspended, \
 					self.tResumed-self.tSuspended, False)
-		# shift the timeline so that tZero is the new 0
-		self.tSuspended -= tZero
-		self.tResumed -= tZero
-		self.start -= tZero
-		self.end -= tZero
-		for phase in self.phases:
-			p = self.dmesg[phase]
-			p['start'] -= tZero
-			p['end'] -= tZero
-			list = p['list']
-			for name in list:
-				d = list[name]
-				d['start'] -= tZero
-				d['end'] -= tZero
-				if('ftrace' in d):
-					cg = d['ftrace']
-					cg.start -= tZero
-					cg.end -= tZero
-					for line in cg.list:
-						line.time -= tZero
-				if('traceevents' in d):
-					for e in d['traceevents']:
-						e.time -= tZero
 	def newPhaseWithSingleAction(self, phasename, devname, start, end, color):
 		for phase in self.phases:
 			self.dmesg[phase]['order'] += 1
@@ -417,6 +861,7 @@
 			{'list': list, 'start': start, 'end': end,
 			'row': 0, 'color': color, 'order': order}
 		self.phases = self.sortedPhases()
+		self.devicegroups.append([phasename])
 	def setPhase(self, phase, ktime, isbegin):
 		if(isbegin):
 			self.dmesg[phase]['start'] = ktime
@@ -442,7 +887,10 @@
 		for devname in phaselist:
 			dev = phaselist[devname]
 			if(dev['end'] < 0):
-				dev['end'] = end
+				for p in self.phases:
+					if self.dmesg[p]['end'] > dev['start']:
+						dev['end'] = self.dmesg[p]['end']
+						break
 				vprint('%s (%s): callback didnt return' % (devname, phase))
 	def deviceFilter(self, devicefilter):
 		# remove all by the relatives of the filter devnames
@@ -472,22 +920,58 @@
 		# if any calls never returned, clip them at system resume end
 		for phase in self.phases:
 			self.fixupInitcalls(phase, self.getEnd())
-	def newActionGlobal(self, name, start, end):
+	def isInsideTimeline(self, start, end):
+		if(self.start <= start and self.end > start):
+			return True
+		return False
+	def phaseOverlap(self, phases):
+		rmgroups = []
+		newgroup = []
+		for group in self.devicegroups:
+			for phase in phases:
+				if phase not in group:
+					continue
+				for p in group:
+					if p not in newgroup:
+						newgroup.append(p)
+				if group not in rmgroups:
+					rmgroups.append(group)
+		for group in rmgroups:
+			self.devicegroups.remove(group)
+		self.devicegroups.append(newgroup)
+	def newActionGlobal(self, name, start, end, pid=-1, color=''):
+		# if event starts before timeline start, expand timeline
+		if(start < self.start):
+			self.setStart(start)
+		# if event ends after timeline end, expand the timeline
+		if(end > self.end):
+			self.setEnd(end)
 		# which phase is this device callback or action "in"
 		targetphase = "none"
+		htmlclass = ''
 		overlap = 0.0
+		phases = []
 		for phase in self.phases:
 			pstart = self.dmesg[phase]['start']
 			pend = self.dmesg[phase]['end']
 			o = max(0, min(end, pend) - max(start, pstart))
-			if(o > overlap):
+			if o > 0:
+				phases.append(phase)
+			if o > overlap:
+				if overlap > 0 and phase == 'post_resume':
+					continue
 				targetphase = phase
 				overlap = o
+		if pid == -2:
+			htmlclass = ' bg'
+		if len(phases) > 1:
+			htmlclass = ' bg'
+			self.phaseOverlap(phases)
 		if targetphase in self.phases:
-			self.newAction(targetphase, name, -1, '', start, end, '')
-			return True
+			newname = self.newAction(targetphase, name, pid, '', start, end, '', htmlclass, color)
+			return (targetphase, newname)
 		return False
-	def newAction(self, phase, name, pid, parent, start, end, drv):
+	def newAction(self, phase, name, pid, parent, start, end, drv, htmlclass='', color=''):
 		# new device callback for a specific phase
 		self.html_device_id += 1
 		devid = '%s%d' % (self.idstr, self.html_device_id)
@@ -495,8 +979,19 @@
 		length = -1.0
 		if(start >= 0 and end >= 0):
 			length = end - start
+		if pid == -2:
+			i = 2
+			origname = name
+			while(name in list):
+				name = '%s[%d]' % (origname, i)
+				i += 1
 		list[name] = {'start': start, 'end': end, 'pid': pid, 'par': parent,
 					  'length': length, 'row': 0, 'id': devid, 'drv': drv }
+		if htmlclass:
+			list[name]['htmlclass'] = htmlclass
+		if color:
+			list[name]['color'] = color
+		return name
 	def deviceIDs(self, devlist, phase):
 		idlist = []
 		list = self.dmesg[phase]['list']
@@ -536,10 +1031,21 @@
 			vprint('    %16s: %f - %f (%d devices)' % (phase, \
 				self.dmesg[phase]['start'], self.dmesg[phase]['end'], dc))
 		vprint('            test end: %f' % self.end)
+	def deviceChildrenAllPhases(self, devname):
+		devlist = []
+		for phase in self.phases:
+			list = self.deviceChildren(devname, phase)
+			for dev in list:
+				if dev not in devlist:
+					devlist.append(dev)
+		return devlist
 	def masterTopology(self, name, list, depth):
 		node = DeviceNode(name, depth)
 		for cname in list:
-			clist = self.deviceChildren(cname, 'resume')
+			# avoid recursions
+			if name == cname:
+				continue
+			clist = self.deviceChildrenAllPhases(cname)
 			cnode = self.masterTopology(cname, clist, depth+1)
 			node.children.append(cnode)
 		return node
@@ -580,7 +1086,8 @@
 			list = self.dmesg[phase]['list']
 			for dev in list:
 				pdev = list[dev]['par']
-				if(re.match('[0-9]*-[0-9]*\.[0-9]*[\.0-9]*\:[\.0-9]*$', pdev)):
+				pid = list[dev]['pid']
+				if(pid < 0 or re.match('[0-9]*-[0-9]*\.[0-9]*[\.0-9]*\:[\.0-9]*$', pdev)):
 					continue
 				if pdev and pdev not in real and pdev not in rootlist:
 					rootlist.append(pdev)
@@ -589,22 +1096,33 @@
 		rootlist = self.rootDeviceList()
 		master = self.masterTopology('', rootlist, 0)
 		return self.printTopology(master)
+	def selectTimelineDevices(self, widfmt, tTotal, mindevlen):
+		# only select devices that will actually show up in html
+		self.tdevlist = dict()
+		for phase in self.dmesg:
+			devlist = []
+			list = self.dmesg[phase]['list']
+			for dev in list:
+				length = (list[dev]['end'] - list[dev]['start']) * 1000
+				width = widfmt % (((list[dev]['end']-list[dev]['start'])*100)/tTotal)
+				if width != '0.000000' and length >= mindevlen:
+					devlist.append(dev)
+			self.tdevlist[phase] = devlist
 
 # Class: TraceEvent
 # Description:
 #	 A container for trace event data found in the ftrace file
 class TraceEvent:
-	ready = False
-	name = ''
+	text = ''
 	time = 0.0
-	color = '#FFFFFF'
 	length = 0.0
-	action = ''
-	def __init__(self, a, n, c, t):
-		self.action = a
-		self.name = n
-		self.color = c
+	title = ''
+	row = 0
+	def __init__(self, a, n, t, l):
+		self.title = a
+		self.text = n
 		self.time = t
+		self.length = l
 
 # Class: FTraceLine
 # Description:
@@ -623,11 +1141,14 @@
 	fcall = False
 	freturn = False
 	fevent = False
+	fkprobe = False
 	depth = 0
 	name = ''
 	type = ''
-	def __init__(self, t, m, d):
+	def __init__(self, t, m='', d=''):
 		self.time = float(t)
+		if not m and not d:
+			return
 		# is this a trace event
 		if(d == 'traceevent' or re.match('^ *\/\* *(?P<msg>.*) \*\/ *$', m)):
 			if(d == 'traceevent'):
@@ -644,6 +1165,18 @@
 				self.type = emm.group('call')
 			else:
 				self.name = msg
+			km = re.match('^(?P<n>.*)_cal$', self.type)
+			if km:
+				self.fcall = True
+				self.fkprobe = True
+				self.type = km.group('n')
+				return
+			km = re.match('^(?P<n>.*)_ret$', self.type)
+			if km:
+				self.freturn = True
+				self.fkprobe = True
+				self.type = km.group('n')
+				return
 			self.fevent = True
 			return
 		# convert the duration to seconds
@@ -662,7 +1195,7 @@
 				# includes comment with function name
 				match = re.match('^} *\/\* *(?P<n>.*) *\*\/$', m)
 				if(match):
-					self.name = match.group('n')
+					self.name = match.group('n').strip()
 		# function call
 		else:
 			self.fcall = True
@@ -670,19 +1203,19 @@
 			if(m[-1] == '{'):
 				match = re.match('^(?P<n>.*) *\(.*', m)
 				if(match):
-					self.name = match.group('n')
+					self.name = match.group('n').strip()
 			# function call with no children (leaf)
 			elif(m[-1] == ';'):
 				self.freturn = True
 				match = re.match('^(?P<n>.*) *\(.*', m)
 				if(match):
-					self.name = match.group('n')
+					self.name = match.group('n').strip()
 			# something else (possibly a trace marker)
 			else:
 				self.name = m
 	def getDepth(self, str):
 		return len(str)/2
-	def debugPrint(self, dev):
+	def debugPrint(self, dev=''):
 		if(self.freturn and self.fcall):
 			print('%s -- %f (%02d): %s(); (%.3f us)' % (dev, self.time, \
 				self.depth, self.name, self.length*1000000))
@@ -692,6 +1225,33 @@
 		else:
 			print('%s -- %f (%02d): %s() { (%.3f us)' % (dev, self.time, \
 				self.depth, self.name, self.length*1000000))
+	def startMarker(self):
+		global sysvals
+		# Is this the starting line of a suspend?
+		if not self.fevent:
+			return False
+		if sysvals.usetracemarkers:
+			if(self.name == 'SUSPEND START'):
+				return True
+			return False
+		else:
+			if(self.type == 'suspend_resume' and
+				re.match('suspend_enter\[.*\] begin', self.name)):
+				return True
+			return False
+	def endMarker(self):
+		# Is this the ending line of a resume?
+		if not self.fevent:
+			return False
+		if sysvals.usetracemarkers:
+			if(self.name == 'RESUME COMPLETE'):
+				return True
+			return False
+		else:
+			if(self.type == 'suspend_resume' and
+				re.match('thaw_processes\[.*\] end', self.name)):
+				return True
+			return False
 
 # Class: FTraceCallGraph
 # Description:
@@ -705,54 +1265,124 @@
 	list = []
 	invalid = False
 	depth = 0
-	def __init__(self):
+	pid = 0
+	def __init__(self, pid):
 		self.start = -1.0
 		self.end = -1.0
 		self.list = []
 		self.depth = 0
-	def setDepth(self, line):
+		self.pid = pid
+	def addLine(self, line, debug=False):
+		# if this is already invalid, just leave
+		if(self.invalid):
+			return False
+		# invalidate on too much data or bad depth
+		if(len(self.list) >= 1000000 or self.depth < 0):
+			self.invalidate(line)
+			return False
+		# compare current depth with this lines pre-call depth
+		prelinedep = line.depth
+		if(line.freturn and not line.fcall):
+			prelinedep += 1
+		last = 0
+		lasttime = line.time
+		virtualfname = 'execution_misalignment'
+		if len(self.list) > 0:
+			last = self.list[-1]
+			lasttime = last.time
+		# handle low misalignments by inserting returns
+		if prelinedep < self.depth:
+			if debug and last:
+				print '-------- task %d --------' % self.pid
+				last.debugPrint()
+			idx = 0
+			# add return calls to get the depth down
+			while prelinedep < self.depth:
+				if debug:
+					print 'MISALIGN LOW (add returns): C%d - eC%d' % (self.depth, prelinedep)
+				self.depth -= 1
+				if idx == 0 and last and last.fcall and not last.freturn:
+					# special case, turn last call into a leaf
+					last.depth = self.depth
+					last.freturn = True
+					last.length = line.time - last.time
+					if debug:
+						last.debugPrint()
+				else:
+					vline = FTraceLine(lasttime)
+					vline.depth = self.depth
+					vline.name = virtualfname
+					vline.freturn = True
+					self.list.append(vline)
+					if debug:
+						vline.debugPrint()
+				idx += 1
+			if debug:
+				line.debugPrint()
+				print ''
+		# handle high misalignments by inserting calls
+		elif prelinedep > self.depth:
+			if debug and last:
+				print '-------- task %d --------' % self.pid
+				last.debugPrint()
+			idx = 0
+			# add calls to get the depth up
+			while prelinedep > self.depth:
+				if debug:
+					print 'MISALIGN HIGH (add calls): C%d - eC%d' % (self.depth, prelinedep)
+				if idx == 0 and line.freturn and not line.fcall:
+					# special case, turn this return into a leaf
+					line.fcall = True
+					prelinedep -= 1
+				else:
+					vline = FTraceLine(lasttime)
+					vline.depth = self.depth
+					vline.name = virtualfname
+					vline.fcall = True
+					if debug:
+						vline.debugPrint()
+					self.list.append(vline)
+					self.depth += 1
+					if not last:
+						self.start = vline.time
+				idx += 1
+			if debug:
+				line.debugPrint()
+				print ''
+		# process the call and set the new depth
 		if(line.fcall and not line.freturn):
-			line.depth = self.depth
 			self.depth += 1
 		elif(line.freturn and not line.fcall):
 			self.depth -= 1
-			line.depth = self.depth
-		else:
-			line.depth = self.depth
-	def addLine(self, line, match):
-		if(not self.invalid):
-			self.setDepth(line)
+		if len(self.list) < 1:
+			self.start = line.time
+		self.list.append(line)
 		if(line.depth == 0 and line.freturn):
 			if(self.start < 0):
 				self.start = line.time
 			self.end = line.time
-			self.list.append(line)
+			if line.fcall:
+				self.end += line.length
+			if self.list[0].name == virtualfname:
+				self.invalid = True
 			return True
-		if(self.invalid):
-			return False
-		if(len(self.list) >= 1000000 or self.depth < 0):
-			if(len(self.list) > 0):
-				first = self.list[0]
-				self.list = []
-				self.list.append(first)
-			self.invalid = True
-			if(not match):
-				return False
-			id = 'task %s cpu %s' % (match.group('pid'), match.group('cpu'))
-			window = '(%f - %f)' % (self.start, line.time)
-			if(self.depth < 0):
-				print('Too much data for '+id+\
-					' (buffer overflow), ignoring this callback')
-			else:
-				print('Too much data for '+id+\
-					' '+window+', ignoring this callback')
-			return False
-		self.list.append(line)
-		if(self.start < 0):
-			self.start = line.time
 		return False
+	def invalidate(self, line):
+		if(len(self.list) > 0):
+			first = self.list[0]
+			self.list = []
+			self.list.append(first)
+		self.invalid = True
+		id = 'task %s' % (self.pid)
+		window = '(%f - %f)' % (self.start, line.time)
+		if(self.depth < 0):
+			vprint('Too much data for '+id+\
+				' (buffer overflow), ignoring this callback')
+		else:
+			vprint('Too much data for '+id+\
+				' '+window+', ignoring this callback')
 	def slice(self, t0, tN):
-		minicg = FTraceCallGraph()
+		minicg = FTraceCallGraph(0)
 		count = -1
 		firstdepth = 0
 		for l in self.list:
@@ -764,13 +1394,26 @@
 				firstdepth = l.depth
 				count = 0
 			l.depth -= firstdepth
-			minicg.addLine(l, 0)
+			minicg.addLine(l)
 			if((count == 0 and l.freturn and l.fcall) or
 				(count > 0 and l.depth <= 0)):
 				break
 			count += 1
 		return minicg
-	def sanityCheck(self):
+	def repair(self, enddepth):
+		# bring the depth back to 0 with additional returns
+		fixed = False
+		last = self.list[-1]
+		for i in reversed(range(enddepth)):
+			t = FTraceLine(last.time)
+			t.depth = i
+			t.freturn = True
+			fixed = self.addLine(t)
+			if fixed:
+				self.end = last.time
+				return True
+		return False
+	def postProcess(self, debug=False):
 		stack = dict()
 		cnt = 0
 		for l in self.list:
@@ -779,98 +1422,317 @@
 				cnt += 1
 			elif(l.freturn and not l.fcall):
 				if(l.depth not in stack):
+					if debug:
+						print 'Post Process Error: Depth missing'
+						l.debugPrint()
 					return False
+				# transfer total time from return line to call line
 				stack[l.depth].length = l.length
-				stack[l.depth] = 0
+				stack.pop(l.depth)
 				l.length = 0
 				cnt -= 1
 		if(cnt == 0):
+			# trace caught the whole call tree
 			return True
-		return False
-	def debugPrint(self, filename):
-		if(filename == 'stdout'):
-			print('[%f - %f]') % (self.start, self.end)
-			for l in self.list:
-				if(l.freturn and l.fcall):
-					print('%f (%02d): %s(); (%.3f us)' % (l.time, \
-						l.depth, l.name, l.length*1000000))
-				elif(l.freturn):
-					print('%f (%02d): %s} (%.3f us)' % (l.time, \
-						l.depth, l.name, l.length*1000000))
-				else:
-					print('%f (%02d): %s() { (%.3f us)' % (l.time, \
-						l.depth, l.name, l.length*1000000))
-			print(' ')
-		else:
-			fp = open(filename, 'w')
-			print(filename)
-			for l in self.list:
-				if(l.freturn and l.fcall):
-					fp.write('%f (%02d): %s(); (%.3f us)\n' % (l.time, \
-						l.depth, l.name, l.length*1000000))
-				elif(l.freturn):
-					fp.write('%f (%02d): %s} (%.3f us)\n' % (l.time, \
-						l.depth, l.name, l.length*1000000))
-				else:
-					fp.write('%f (%02d): %s() { (%.3f us)\n' % (l.time, \
-						l.depth, l.name, l.length*1000000))
-			fp.close()
+		elif(cnt < 0):
+			if debug:
+				print 'Post Process Error: Depth is less than 0'
+			return False
+		# trace ended before call tree finished
+		return self.repair(cnt)
+	def deviceMatch(self, pid, data):
+		found = False
+		# add the callgraph data to the device hierarchy
+		borderphase = {
+			'dpm_prepare': 'suspend_prepare',
+			'dpm_complete': 'resume_complete'
+		}
+		if(self.list[0].name in borderphase):
+			p = borderphase[self.list[0].name]
+			list = data.dmesg[p]['list']
+			for devname in list:
+				dev = list[devname]
+				if(pid == dev['pid'] and
+					self.start <= dev['start'] and
+					self.end >= dev['end']):
+					dev['ftrace'] = self.slice(dev['start'], dev['end'])
+					found = True
+			return found
+		for p in data.phases:
+			if(data.dmesg[p]['start'] <= self.start and
+				self.start <= data.dmesg[p]['end']):
+				list = data.dmesg[p]['list']
+				for devname in list:
+					dev = list[devname]
+					if(pid == dev['pid'] and
+						self.start <= dev['start'] and
+						self.end >= dev['end']):
+						dev['ftrace'] = self
+						found = True
+						break
+				break
+		return found
+	def newActionFromFunction(self, data):
+		name = self.list[0].name
+		if name in ['dpm_run_callback', 'dpm_prepare', 'dpm_complete']:
+			return
+		fs = self.start
+		fe = self.end
+		if fs < data.start or fe > data.end:
+			return
+		phase = ''
+		for p in data.phases:
+			if(data.dmesg[p]['start'] <= self.start and
+				self.start < data.dmesg[p]['end']):
+				phase = p
+				break
+		if not phase:
+			return
+		out = data.newActionGlobal(name, fs, fe, -2)
+		if out:
+			phase, myname = out
+			data.dmesg[phase]['list'][myname]['ftrace'] = self
+	def debugPrint(self):
+		print('[%f - %f] %s (%d)') % (self.start, self.end, self.list[0].name, self.pid)
+		for l in self.list:
+			if(l.freturn and l.fcall):
+				print('%f (%02d): %s(); (%.3f us)' % (l.time, \
+					l.depth, l.name, l.length*1000000))
+			elif(l.freturn):
+				print('%f (%02d): %s} (%.3f us)' % (l.time, \
+					l.depth, l.name, l.length*1000000))
+			else:
+				print('%f (%02d): %s() { (%.3f us)' % (l.time, \
+					l.depth, l.name, l.length*1000000))
+		print(' ')
 
 # Class: Timeline
 # Description:
-#	 A container for a suspend/resume html timeline. In older versions
-#	 of the script there were multiple timelines, but in the latest
-#	 there is only one.
+#	 A container for a device timeline which calculates
+#	 all the html properties to display it correctly
 class Timeline:
 	html = {}
-	scaleH = 0.0 # height of the row as a percent of the timeline height
-	rowH = 0.0 # height of each row in percent of the timeline height
-	row_height_pixels = 30
-	maxrows = 0
-	height = 0
-	def __init__(self):
+	height = 0	# total timeline height
+	scaleH = 20	# timescale (top) row height
+	rowH = 30	# device row height
+	bodyH = 0	# body height
+	rows = 0	# total timeline rows
+	phases = []
+	rowmaxlines = dict()
+	rowcount = dict()
+	rowheight = dict()
+	def __init__(self, rowheight):
+		self.rowH = rowheight
 		self.html = {
+			'header': '',
 			'timeline': '',
 			'legend': '',
-			'scale': ''
 		}
-	def setRows(self, rows):
-		self.maxrows = int(rows)
-		self.scaleH = 100.0/float(self.maxrows)
-		self.height = self.maxrows*self.row_height_pixels
-		r = float(self.maxrows - 1)
-		if(r < 1.0):
-			r = 1.0
-		self.rowH = (100.0 - self.scaleH)/r
+	# Function: getDeviceRows
+	# Description:
+	#    determine how may rows the device funcs will take
+	# Arguments:
+	#	 rawlist: the list of devices/actions for a single phase
+	# Output:
+	#	 The total number of rows needed to display this phase of the timeline
+	def getDeviceRows(self, rawlist):
+		# clear all rows and set them to undefined
+		lendict = dict()
+		for item in rawlist:
+			item.row = -1
+			lendict[item] = item.length
+		list = []
+		for i in sorted(lendict, key=lendict.get, reverse=True):
+			list.append(i)
+		remaining = len(list)
+		rowdata = dict()
+		row = 1
+		# try to pack each row with as many ranges as possible
+		while(remaining > 0):
+			if(row not in rowdata):
+				rowdata[row] = []
+			for i in list:
+				if(i.row >= 0):
+					continue
+				s = i.time
+				e = i.time + i.length
+				valid = True
+				for ritem in rowdata[row]:
+					rs = ritem.time
+					re = ritem.time + ritem.length
+					if(not (((s <= rs) and (e <= rs)) or
+						((s >= re) and (e >= re)))):
+						valid = False
+						break
+				if(valid):
+					rowdata[row].append(i)
+					i.row = row
+					remaining -= 1
+			row += 1
+		return row
+	# Function: getPhaseRows
+	# Description:
+	#	 Organize the timeline entries into the smallest
+	#	 number of rows possible, with no entry overlapping
+	# Arguments:
+	#	 list: the list of devices/actions for a single phase
+	#	 devlist: string list of device names to use
+	# Output:
+	#	 The total number of rows needed to display this phase of the timeline
+	def getPhaseRows(self, dmesg, devlist):
+		# clear all rows and set them to undefined
+		remaining = len(devlist)
+		rowdata = dict()
+		row = 0
+		lendict = dict()
+		myphases = []
+		for item in devlist:
+			if item[0] not in self.phases:
+				self.phases.append(item[0])
+			if item[0] not in myphases:
+				myphases.append(item[0])
+				self.rowmaxlines[item[0]] = dict()
+				self.rowheight[item[0]] = dict()
+			dev = dmesg[item[0]]['list'][item[1]]
+			dev['row'] = -1
+			lendict[item] = float(dev['end']) - float(dev['start'])
+			if 'src' in dev:
+				dev['devrows'] = self.getDeviceRows(dev['src'])
+		lenlist = []
+		for i in sorted(lendict, key=lendict.get, reverse=True):
+			lenlist.append(i)
+		orderedlist = []
+		for item in lenlist:
+			dev = dmesg[item[0]]['list'][item[1]]
+			if dev['pid'] == -2:
+				orderedlist.append(item)
+		for item in lenlist:
+			if item not in orderedlist:
+				orderedlist.append(item)
+		# try to pack each row with as many ranges as possible
+		while(remaining > 0):
+			rowheight = 1
+			if(row not in rowdata):
+				rowdata[row] = []
+			for item in orderedlist:
+				dev = dmesg[item[0]]['list'][item[1]]
+				if(dev['row'] < 0):
+					s = dev['start']
+					e = dev['end']
+					valid = True
+					for ritem in rowdata[row]:
+						rs = ritem['start']
+						re = ritem['end']
+						if(not (((s <= rs) and (e <= rs)) or
+							((s >= re) and (e >= re)))):
+							valid = False
+							break
+					if(valid):
+						rowdata[row].append(dev)
+						dev['row'] = row
+						remaining -= 1
+						if 'devrows' in dev and dev['devrows'] > rowheight:
+							rowheight = dev['devrows']
+			for phase in myphases:
+				self.rowmaxlines[phase][row] = rowheight
+				self.rowheight[phase][row] = rowheight * self.rowH
+			row += 1
+		if(row > self.rows):
+			self.rows = int(row)
+		for phase in myphases:
+			self.rowcount[phase] = row
+		return row
+	def phaseRowHeight(self, phase, row):
+		return self.rowheight[phase][row]
+	def phaseRowTop(self, phase, row):
+		top = 0
+		for i in sorted(self.rowheight[phase]):
+			if i >= row:
+				break
+			top += self.rowheight[phase][i]
+		return top
+	# Function: calcTotalRows
+	# Description:
+	#	 Calculate the heights and offsets for the header and rows
+	def calcTotalRows(self):
+		maxrows = 0
+		standardphases = []
+		for phase in self.phases:
+			total = 0
+			for i in sorted(self.rowmaxlines[phase]):
+				total += self.rowmaxlines[phase][i]
+			if total > maxrows:
+				maxrows = total
+			if total == self.rowcount[phase]:
+				standardphases.append(phase)
+		self.height = self.scaleH + (maxrows*self.rowH)
+		self.bodyH = self.height - self.scaleH
+		for phase in standardphases:
+			for i in sorted(self.rowheight[phase]):
+				self.rowheight[phase][i] = self.bodyH/self.rowcount[phase]
+	# Function: createTimeScale
+	# Description:
+	#	 Create the timescale for a timeline block
+	# Arguments:
+	#	 m0: start time (mode begin)
+	#	 mMax: end time (mode end)
+	#	 tTotal: total timeline time
+	#	 mode: suspend or resume
+	# Output:
+	#	 The html code needed to display the time scale
+	def createTimeScale(self, m0, mMax, tTotal, mode):
+		timescale = '<div class="t" style="right:{0}%">{1}</div>\n'
+		rline = '<div class="t" style="left:0;border-left:1px solid black;border-right:0;">Resume</div>\n'
+		output = '<div class="timescale">\n'
+		# set scale for timeline
+		mTotal = mMax - m0
+		tS = 0.1
+		if(tTotal <= 0):
+			return output+'</div>\n'
+		if(tTotal > 4):
+			tS = 1
+		divTotal = int(mTotal/tS) + 1
+		divEdge = (mTotal - tS*(divTotal-1))*100/mTotal
+		for i in range(divTotal):
+			htmlline = ''
+			if(mode == 'resume'):
+				pos = '%0.3f' % (100 - ((float(i)*tS*100)/mTotal))
+				val = '%0.fms' % (float(i)*tS*1000)
+				htmlline = timescale.format(pos, val)
+				if(i == 0):
+					htmlline = rline
+			else:
+				pos = '%0.3f' % (100 - ((float(i)*tS*100)/mTotal) - divEdge)
+				val = '%0.fms' % (float(i-divTotal+1)*tS*1000)
+				if(i == divTotal - 1):
+					val = 'Suspend'
+				htmlline = timescale.format(pos, val)
+			output += htmlline
+		output += '</div>\n'
+		return output
 
-# Class: TestRun
+# Class: TestProps
 # Description:
-#	 A container for a suspend/resume test run. This is necessary as
-#	 there could be more than one, and they need to be separate.
-class TestRun:
+#	 A list of values describing the properties of these test runs
+class TestProps:
+	stamp = ''
+	tracertype = ''
+	S0i3 = False
+	fwdata = []
 	ftrace_line_fmt_fg = \
 		'^ *(?P<time>[0-9\.]*) *\| *(?P<cpu>[0-9]*)\)'+\
 		' *(?P<proc>.*)-(?P<pid>[0-9]*) *\|'+\
-		'[ +!]*(?P<dur>[0-9\.]*) .*\|  (?P<msg>.*)'
+		'[ +!#\*@$]*(?P<dur>[0-9\.]*) .*\|  (?P<msg>.*)'
 	ftrace_line_fmt_nop = \
 		' *(?P<proc>.*)-(?P<pid>[0-9]*) *\[(?P<cpu>[0-9]*)\] *'+\
 		'(?P<flags>.{4}) *(?P<time>[0-9\.]*): *'+\
 		'(?P<msg>.*)'
 	ftrace_line_fmt = ftrace_line_fmt_nop
 	cgformat = False
-	ftemp = dict()
-	ttemp = dict()
-	inthepipe = False
-	tracertype = ''
 	data = 0
-	def __init__(self, dataobj):
-		self.data = dataobj
-		self.ftemp = dict()
-		self.ttemp = dict()
-	def isReady(self):
-		if(tracertype == '' or not data):
-			return False
-		return True
+	ktemp = dict()
+	def __init__(self):
+		self.ktemp = dict()
 	def setTracerType(self, tracer):
 		self.tracertype = tracer
 		if(tracer == 'function_graph'):
@@ -881,6 +1743,19 @@
 		else:
 			doError('Invalid tracer format: [%s]' % tracer, False)
 
+# Class: TestRun
+# Description:
+#	 A container for a suspend/resume test run. This is necessary as
+#	 there could be more than one, and they need to be separate.
+class TestRun:
+	ftemp = dict()
+	ttemp = dict()
+	data = 0
+	def __init__(self, dataobj):
+		self.data = dataobj
+		self.ftemp = dict()
+		self.ttemp = dict()
+
 # ----------------- FUNCTIONS --------------------
 
 # Function: vprint
@@ -893,104 +1768,16 @@
 	if(sysvals.verbose):
 		print(msg)
 
-# Function: initFtrace
-# Description:
-#	 Configure ftrace to use trace events and/or a callgraph
-def initFtrace():
-	global sysvals
-
-	tp = sysvals.tpath
-	cf = 'dpm_run_callback'
-	if(sysvals.usetraceeventsonly):
-		cf = '-e dpm_prepare -e dpm_complete -e dpm_run_callback'
-	if(sysvals.usecallgraph or sysvals.usetraceevents):
-		print('INITIALIZING FTRACE...')
-		# turn trace off
-		os.system('echo 0 > '+tp+'tracing_on')
-		# set the trace clock to global
-		os.system('echo global > '+tp+'trace_clock')
-		# set trace buffer to a huge value
-		os.system('echo nop > '+tp+'current_tracer')
-		os.system('echo 100000 > '+tp+'buffer_size_kb')
-		# initialize the callgraph trace, unless this is an x2 run
-		if(sysvals.usecallgraph and sysvals.execcount == 1):
-			# set trace type
-			os.system('echo function_graph > '+tp+'current_tracer')
-			os.system('echo "" > '+tp+'set_ftrace_filter')
-			# set trace format options
-			os.system('echo funcgraph-abstime > '+tp+'trace_options')
-			os.system('echo funcgraph-proc > '+tp+'trace_options')
-			# focus only on device suspend and resume
-			os.system('cat '+tp+'available_filter_functions | grep '+\
-				cf+' > '+tp+'set_graph_function')
-		if(sysvals.usetraceevents):
-			# turn trace events on
-			events = iter(sysvals.traceevents)
-			for e in events:
-				os.system('echo 1 > '+sysvals.epath+e+'/enable')
-		# clear the trace buffer
-		os.system('echo "" > '+tp+'trace')
-
-# Function: initFtraceAndroid
-# Description:
-#	 Configure ftrace to capture trace events
-def initFtraceAndroid():
-	global sysvals
-
-	tp = sysvals.tpath
-	if(sysvals.usetraceevents):
-		print('INITIALIZING FTRACE...')
-		# turn trace off
-		os.system(sysvals.adb+" shell 'echo 0 > "+tp+"tracing_on'")
-		# set the trace clock to global
-		os.system(sysvals.adb+" shell 'echo global > "+tp+"trace_clock'")
-		# set trace buffer to a huge value
-		os.system(sysvals.adb+" shell 'echo nop > "+tp+"current_tracer'")
-		os.system(sysvals.adb+" shell 'echo 10000 > "+tp+"buffer_size_kb'")
-		# turn trace events on
-		events = iter(sysvals.traceevents)
-		for e in events:
-			os.system(sysvals.adb+" shell 'echo 1 > "+\
-				sysvals.epath+e+"/enable'")
-		# clear the trace buffer
-		os.system(sysvals.adb+" shell 'echo \"\" > "+tp+"trace'")
-
-# Function: verifyFtrace
-# Description:
-#	 Check that ftrace is working on the system
-# Output:
-#	 True or False
-def verifyFtrace():
-	global sysvals
-	# files needed for any trace data
-	files = ['buffer_size_kb', 'current_tracer', 'trace', 'trace_clock',
-			 'trace_marker', 'trace_options', 'tracing_on']
-	# files needed for callgraph trace data
-	tp = sysvals.tpath
-	if(sysvals.usecallgraph):
-		files += [
-			'available_filter_functions',
-			'set_ftrace_filter',
-			'set_graph_function'
-		]
-	for f in files:
-		if(sysvals.android):
-			out = os.popen(sysvals.adb+' shell ls '+tp+f).read().strip()
-			if(out != tp+f):
-				return False
-		else:
-			if(os.path.exists(tp+f) == False):
-				return False
-	return True
-
 # Function: parseStamp
 # Description:
 #	 Pull in the stamp comment line from the data file(s),
 #	 create the stamp, and add it to the global sysvals object
 # Arguments:
 #	 m: the valid re.match output for the stamp line
-def parseStamp(m, data):
+def parseStamp(line, data):
 	global sysvals
+
+	m = re.match(sysvals.stampfmt, line)
 	data.stamp = {'time': '', 'host': '', 'mode': ''}
 	dt = datetime(int(m.group('y'))+2000, int(m.group('m')),
 		int(m.group('d')), int(m.group('H')), int(m.group('M')),
@@ -999,6 +1786,7 @@
 	data.stamp['host'] = m.group('host')
 	data.stamp['mode'] = m.group('mode')
 	data.stamp['kernel'] = m.group('kernel')
+	sysvals.hostname = data.stamp['host']
 	sysvals.suspendmode = data.stamp['mode']
 	if not sysvals.stamp:
 		sysvals.stamp = data.stamp
@@ -1031,14 +1819,35 @@
 def doesTraceLogHaveTraceEvents():
 	global sysvals
 
+	# check for kprobes
+	sysvals.usekprobes = False
+	out = os.system('grep -q "_cal: (" '+sysvals.ftracefile)
+	if(out == 0):
+		sysvals.usekprobes = True
+	# check for callgraph data on trace event blocks
+	out = os.system('grep -q "_cpu_down()" '+sysvals.ftracefile)
+	if(out == 0):
+		sysvals.usekprobes = True
+	out = os.popen('head -1 '+sysvals.ftracefile).read().replace('\n', '')
+	m = re.match(sysvals.stampfmt, out)
+	if m and m.group('mode') == 'command':
+		sysvals.usetraceeventsonly = True
+		sysvals.usetraceevents = True
+		return
+	# figure out what level of trace events are supported
 	sysvals.usetraceeventsonly = True
 	sysvals.usetraceevents = False
 	for e in sysvals.traceevents:
-		out = os.popen('cat '+sysvals.ftracefile+' | grep "'+e+': "').read()
-		if(not out):
+		out = os.system('grep -q "'+e+': " '+sysvals.ftracefile)
+		if(out != 0):
 			sysvals.usetraceeventsonly = False
-		if(e == 'suspend_resume' and out):
+		if(e == 'suspend_resume' and out == 0):
 			sysvals.usetraceevents = True
+	# determine is this log is properly formatted
+	for e in ['SUSPEND START', 'RESUME COMPLETE']:
+		out = os.system('grep -q "'+e+'" '+sysvals.ftracefile)
+		if(out != 0):
+			sysvals.usetracemarkers = False
 
 # Function: appendIncompleteTraceLog
 # Description:
@@ -1055,44 +1864,42 @@
 
 	# create TestRun vessels for ftrace parsing
 	testcnt = len(testruns)
-	testidx = -1
+	testidx = 0
 	testrun = []
 	for data in testruns:
 		testrun.append(TestRun(data))
 
 	# extract the callgraph and traceevent data
 	vprint('Analyzing the ftrace data...')
+	tp = TestProps()
 	tf = open(sysvals.ftracefile, 'r')
+	data = 0
 	for line in tf:
 		# remove any latent carriage returns
 		line = line.replace('\r\n', '')
-		# grab the time stamp first (signifies the start of the test run)
+		# grab the time stamp
 		m = re.match(sysvals.stampfmt, line)
 		if(m):
-			testidx += 1
-			parseStamp(m, testrun[testidx].data)
-			continue
-		# pull out any firmware data
-		if(re.match(sysvals.firmwarefmt, line)):
-			continue
-		# if we havent found a test time stamp yet keep spinning til we do
-		if(testidx < 0):
+			tp.stamp = line
 			continue
 		# determine the trace data type (required for further parsing)
 		m = re.match(sysvals.tracertypefmt, line)
 		if(m):
-			tracer = m.group('t')
-			testrun[testidx].setTracerType(tracer)
+			tp.setTracerType(m.group('t'))
 			continue
-		# parse only valid lines, if this isnt one move on
-		m = re.match(testrun[testidx].ftrace_line_fmt, line)
+		# device properties line
+		if(re.match(sysvals.devpropfmt, line)):
+			devProps(line)
+			continue
+		# parse only valid lines, if this is not one move on
+		m = re.match(tp.ftrace_line_fmt, line)
 		if(not m):
 			continue
 		# gather the basic message data from the line
 		m_time = m.group('time')
 		m_pid = m.group('pid')
 		m_msg = m.group('msg')
-		if(testrun[testidx].cgformat):
+		if(tp.cgformat):
 			m_param3 = m.group('dur')
 		else:
 			m_param3 = 'traceevent'
@@ -1104,119 +1911,114 @@
 		# the line should be a call, return, or event
 		if(not t.fcall and not t.freturn and not t.fevent):
 			continue
-		# only parse the ftrace data during suspend/resume
-		data = testrun[testidx].data
-		if(not testrun[testidx].inthepipe):
-			# look for the suspend start marker
-			if(t.fevent):
-				if(t.name == 'SUSPEND START'):
-					testrun[testidx].inthepipe = True
-					data.setStart(t.time)
+		# look for the suspend start marker
+		if(t.startMarker()):
+			data = testrun[testidx].data
+			parseStamp(tp.stamp, data)
+			data.setStart(t.time)
+			continue
+		if(not data):
+			continue
+		# find the end of resume
+		if(t.endMarker()):
+			data.setEnd(t.time)
+			testidx += 1
+			if(testidx >= testcnt):
+				break
+			continue
+		# trace event processing
+		if(t.fevent):
+			# general trace events have two types, begin and end
+			if(re.match('(?P<name>.*) begin$', t.name)):
+				isbegin = True
+			elif(re.match('(?P<name>.*) end$', t.name)):
+				isbegin = False
+			else:
 				continue
-		else:
-			# trace event processing
-			if(t.fevent):
-				if(t.name == 'RESUME COMPLETE'):
-					testrun[testidx].inthepipe = False
-					data.setEnd(t.time)
-					if(testidx == testcnt - 1):
-						break
-					continue
-				# general trace events have two types, begin and end
-				if(re.match('(?P<name>.*) begin$', t.name)):
-					isbegin = True
-				elif(re.match('(?P<name>.*) end$', t.name)):
-					isbegin = False
-				else:
-					continue
-				m = re.match('(?P<name>.*)\[(?P<val>[0-9]*)\] .*', t.name)
-				if(m):
-					val = m.group('val')
-					if val == '0':
-						name = m.group('name')
-					else:
-						name = m.group('name')+'['+val+']'
-				else:
-					m = re.match('(?P<name>.*) .*', t.name)
+			m = re.match('(?P<name>.*)\[(?P<val>[0-9]*)\] .*', t.name)
+			if(m):
+				val = m.group('val')
+				if val == '0':
 					name = m.group('name')
-				# special processing for trace events
-				if re.match('dpm_prepare\[.*', name):
-					continue
-				elif re.match('machine_suspend.*', name):
-					continue
-				elif re.match('suspend_enter\[.*', name):
-					if(not isbegin):
-						data.dmesg['suspend_prepare']['end'] = t.time
-					continue
-				elif re.match('dpm_suspend\[.*', name):
-					if(not isbegin):
-						data.dmesg['suspend']['end'] = t.time
-					continue
-				elif re.match('dpm_suspend_late\[.*', name):
-					if(isbegin):
-						data.dmesg['suspend_late']['start'] = t.time
-					else:
-						data.dmesg['suspend_late']['end'] = t.time
-					continue
-				elif re.match('dpm_suspend_noirq\[.*', name):
-					if(isbegin):
-						data.dmesg['suspend_noirq']['start'] = t.time
-					else:
-						data.dmesg['suspend_noirq']['end'] = t.time
-					continue
-				elif re.match('dpm_resume_noirq\[.*', name):
-					if(isbegin):
-						data.dmesg['resume_machine']['end'] = t.time
-						data.dmesg['resume_noirq']['start'] = t.time
-					else:
-						data.dmesg['resume_noirq']['end'] = t.time
-					continue
-				elif re.match('dpm_resume_early\[.*', name):
-					if(isbegin):
-						data.dmesg['resume_early']['start'] = t.time
-					else:
-						data.dmesg['resume_early']['end'] = t.time
-					continue
-				elif re.match('dpm_resume\[.*', name):
-					if(isbegin):
-						data.dmesg['resume']['start'] = t.time
-					else:
-						data.dmesg['resume']['end'] = t.time
-					continue
-				elif re.match('dpm_complete\[.*', name):
-					if(isbegin):
-						data.dmesg['resume_complete']['start'] = t.time
-					else:
-						data.dmesg['resume_complete']['end'] = t.time
-					continue
-				# is this trace event outside of the devices calls
-				if(data.isTraceEventOutsideDeviceCalls(pid, t.time)):
-					# global events (outside device calls) are simply graphed
-					if(isbegin):
-						# store each trace event in ttemp
-						if(name not in testrun[testidx].ttemp):
-							testrun[testidx].ttemp[name] = []
-						testrun[testidx].ttemp[name].append(\
-							{'begin': t.time, 'end': t.time})
-					else:
-						# finish off matching trace event in ttemp
-						if(name in testrun[testidx].ttemp):
-							testrun[testidx].ttemp[name][-1]['end'] = t.time
 				else:
-					if(isbegin):
-						data.addIntraDevTraceEvent('', name, pid, t.time)
-					else:
-						data.capIntraDevTraceEvent('', name, pid, t.time)
-			# call/return processing
-			elif sysvals.usecallgraph:
-				# create a callgraph object for the data
-				if(pid not in testrun[testidx].ftemp):
-					testrun[testidx].ftemp[pid] = []
-					testrun[testidx].ftemp[pid].append(FTraceCallGraph())
-				# when the call is finished, see which device matches it
-				cg = testrun[testidx].ftemp[pid][-1]
-				if(cg.addLine(t, m)):
-					testrun[testidx].ftemp[pid].append(FTraceCallGraph())
+					name = m.group('name')+'['+val+']'
+			else:
+				m = re.match('(?P<name>.*) .*', t.name)
+				name = m.group('name')
+			# special processing for trace events
+			if re.match('dpm_prepare\[.*', name):
+				continue
+			elif re.match('machine_suspend.*', name):
+				continue
+			elif re.match('suspend_enter\[.*', name):
+				if(not isbegin):
+					data.dmesg['suspend_prepare']['end'] = t.time
+				continue
+			elif re.match('dpm_suspend\[.*', name):
+				if(not isbegin):
+					data.dmesg['suspend']['end'] = t.time
+				continue
+			elif re.match('dpm_suspend_late\[.*', name):
+				if(isbegin):
+					data.dmesg['suspend_late']['start'] = t.time
+				else:
+					data.dmesg['suspend_late']['end'] = t.time
+				continue
+			elif re.match('dpm_suspend_noirq\[.*', name):
+				if(isbegin):
+					data.dmesg['suspend_noirq']['start'] = t.time
+				else:
+					data.dmesg['suspend_noirq']['end'] = t.time
+				continue
+			elif re.match('dpm_resume_noirq\[.*', name):
+				if(isbegin):
+					data.dmesg['resume_machine']['end'] = t.time
+					data.dmesg['resume_noirq']['start'] = t.time
+				else:
+					data.dmesg['resume_noirq']['end'] = t.time
+				continue
+			elif re.match('dpm_resume_early\[.*', name):
+				if(isbegin):
+					data.dmesg['resume_early']['start'] = t.time
+				else:
+					data.dmesg['resume_early']['end'] = t.time
+				continue
+			elif re.match('dpm_resume\[.*', name):
+				if(isbegin):
+					data.dmesg['resume']['start'] = t.time
+				else:
+					data.dmesg['resume']['end'] = t.time
+				continue
+			elif re.match('dpm_complete\[.*', name):
+				if(isbegin):
+					data.dmesg['resume_complete']['start'] = t.time
+				else:
+					data.dmesg['resume_complete']['end'] = t.time
+				continue
+			# skip trace events inside devices calls
+			if(not data.isTraceEventOutsideDeviceCalls(pid, t.time)):
+				continue
+			# global events (outside device calls) are simply graphed
+			if(isbegin):
+				# store each trace event in ttemp
+				if(name not in testrun[testidx].ttemp):
+					testrun[testidx].ttemp[name] = []
+				testrun[testidx].ttemp[name].append(\
+					{'begin': t.time, 'end': t.time})
+			else:
+				# finish off matching trace event in ttemp
+				if(name in testrun[testidx].ttemp):
+					testrun[testidx].ttemp[name][-1]['end'] = t.time
+		# call/return processing
+		elif sysvals.usecallgraph:
+			# create a callgraph object for the data
+			if(pid not in testrun[testidx].ftemp):
+				testrun[testidx].ftemp[pid] = []
+				testrun[testidx].ftemp[pid].append(FTraceCallGraph(pid))
+			# when the call is finished, see which device matches it
+			cg = testrun[testidx].ftemp[pid][-1]
+			if(cg.addLine(t)):
+				testrun[testidx].ftemp[pid].append(FTraceCallGraph(pid))
 	tf.close()
 
 	for test in testrun:
@@ -1224,20 +2026,14 @@
 		if(sysvals.usetraceevents):
 			for name in test.ttemp:
 				for event in test.ttemp[name]:
-					begin = event['begin']
-					end = event['end']
-					# if event starts before timeline start, expand timeline
-					if(begin < test.data.start):
-						test.data.setStart(begin)
-					# if event ends after timeline end, expand the timeline
-					if(end > test.data.end):
-						test.data.setEnd(end)
-					test.data.newActionGlobal(name, begin, end)
+					test.data.newActionGlobal(name, event['begin'], event['end'])
 
 		# add the callgraph data to the device hierarchy
 		for pid in test.ftemp:
 			for cg in test.ftemp[pid]:
-				if(not cg.sanityCheck()):
+				if len(cg.list) < 1 or cg.invalid:
+					continue
+				if(not cg.postProcess()):
 					id = 'task %s cpu %s' % (pid, m.group('cpu'))
 					vprint('Sanity check failed for '+\
 						id+', ignoring this callback')
@@ -1259,14 +2055,6 @@
 		if(sysvals.verbose):
 			test.data.printDetails()
 
-
-	# add the time in between the tests as a new phase so we can see it
-	if(len(testruns) > 1):
-		t1e = testruns[0].getEnd()
-		t2s = testruns[-1].getStart()
-		testruns[-1].newPhaseWithSingleAction('user mode', \
-			'user mode', t1e, t2s, '#FF9966')
-
 # Function: parseTraceLog
 # Description:
 #	 Analyze an ftrace log output file generated from this app during
@@ -1280,9 +2068,16 @@
 
 	vprint('Analyzing the ftrace data...')
 	if(os.path.exists(sysvals.ftracefile) == False):
-		doError('%s doesnt exist' % sysvals.ftracefile, False)
+		doError('%s does not exist' % sysvals.ftracefile, False)
+
+	sysvals.setupAllKprobes()
+	tracewatch = ['suspend_enter']
+	if sysvals.usekprobes:
+		tracewatch += ['sync_filesystems', 'freeze_processes', 'syscore_suspend',
+			'syscore_resume', 'resume_console', 'thaw_processes', 'CPU_ON', 'CPU_OFF']
 
 	# extract the callgraph and traceevent data
+	tp = TestProps()
 	testruns = []
 	testdata = []
 	testrun = 0
@@ -1295,27 +2090,17 @@
 		# stamp line: each stamp means a new test run
 		m = re.match(sysvals.stampfmt, line)
 		if(m):
-			data = Data(len(testdata))
-			testdata.append(data)
-			testrun = TestRun(data)
-			testruns.append(testrun)
-			parseStamp(m, data)
-			continue
-		if(not data):
+			tp.stamp = line
 			continue
 		# firmware line: pull out any firmware data
 		m = re.match(sysvals.firmwarefmt, line)
 		if(m):
-			data.fwSuspend = int(m.group('s'))
-			data.fwResume = int(m.group('r'))
-			if(data.fwSuspend > 0 or data.fwResume > 0):
-				data.fwValid = True
+			tp.fwdata.append((int(m.group('s')), int(m.group('r'))))
 			continue
 		# tracer type line: determine the trace data type
 		m = re.match(sysvals.tracertypefmt, line)
 		if(m):
-			tracer = m.group('t')
-			testrun.setTracerType(tracer)
+			tp.setTracerType(m.group('t'))
 			continue
 		# post resume time line: did this test run include post-resume data
 		m = re.match(sysvals.postresumefmt, line)
@@ -1324,15 +2109,20 @@
 			if(t > 0):
 				sysvals.postresumetime = t
 			continue
+		# device properties line
+		if(re.match(sysvals.devpropfmt, line)):
+			devProps(line)
+			continue
 		# ftrace line: parse only valid lines
-		m = re.match(testrun.ftrace_line_fmt, line)
+		m = re.match(tp.ftrace_line_fmt, line)
 		if(not m):
 			continue
 		# gather the basic message data from the line
 		m_time = m.group('time')
+		m_proc = m.group('proc')
 		m_pid = m.group('pid')
 		m_msg = m.group('msg')
-		if(testrun.cgformat):
+		if(tp.cgformat):
 			m_param3 = m.group('dur')
 		else:
 			m_param3 = 'traceevent'
@@ -1344,24 +2134,38 @@
 		# the line should be a call, return, or event
 		if(not t.fcall and not t.freturn and not t.fevent):
 			continue
-		# only parse the ftrace data during suspend/resume
-		if(not testrun.inthepipe):
-			# look for the suspend start marker
-			if(t.fevent):
-				if(t.name == 'SUSPEND START'):
-					testrun.inthepipe = True
-					data.setStart(t.time)
+		# find the start of suspend
+		if(t.startMarker()):
+			phase = 'suspend_prepare'
+			data = Data(len(testdata))
+			testdata.append(data)
+			testrun = TestRun(data)
+			testruns.append(testrun)
+			parseStamp(tp.stamp, data)
+			if len(tp.fwdata) > data.testnumber:
+				data.fwSuspend, data.fwResume = tp.fwdata[data.testnumber]
+				if(data.fwSuspend > 0 or data.fwResume > 0):
+					data.fwValid = True
+			data.setStart(t.time)
+			continue
+		if(not data):
+			continue
+		# find the end of resume
+		if(t.endMarker()):
+			if(sysvals.usetracemarkers and sysvals.postresumetime > 0):
+				phase = 'post_resume'
+				data.newPhase(phase, t.time, t.time, '#F0F0F0', -1)
+			data.setEnd(t.time)
+			if(not sysvals.usetracemarkers):
+				# no trace markers? then quit and be sure to finish recording
+				# the event we used to trigger resume end
+				if(len(testrun.ttemp['thaw_processes']) > 0):
+					# if an entry exists, assume this is its end
+					testrun.ttemp['thaw_processes'][-1]['end'] = t.time
+				break
 			continue
 		# trace event processing
 		if(t.fevent):
-			if(t.name == 'RESUME COMPLETE'):
-				if(sysvals.postresumetime > 0):
-					phase = 'post_resume'
-					data.newPhase(phase, t.time, t.time, '#FF9966', -1)
-				else:
-					testrun.inthepipe = False
-				data.setEnd(t.time)
-				continue
 			if(phase == 'post_resume'):
 				data.setEnd(t.time)
 			if(t.type == 'suspend_resume'):
@@ -1383,8 +2187,7 @@
 					m = re.match('(?P<name>.*) .*', t.name)
 					name = m.group('name')
 				# ignore these events
-				if(re.match('acpi_suspend\[.*', t.name) or
-					re.match('suspend_enter\[.*', name)):
+				if(name.split('[')[0] in tracewatch):
 					continue
 				# -- phase changes --
 				# suspend_prepare start
@@ -1418,7 +2221,7 @@
 						data.dmesg[phase]['end'] = t.time
 						data.tSuspended = t.time
 					else:
-						if(sysvals.suspendmode in ['mem', 'disk']):
+						if(sysvals.suspendmode in ['mem', 'disk'] and not tp.S0i3):
 							data.dmesg['suspend_machine']['end'] = t.time
 							data.tSuspended = t.time
 						phase = 'resume_machine'
@@ -1426,6 +2229,15 @@
 						data.tResumed = t.time
 						data.tLow = data.tResumed - data.tSuspended
 					continue
+				# acpi_suspend
+				elif(re.match('acpi_suspend\[.*', t.name)):
+					# acpi_suspend[0] S0i3
+					if(re.match('acpi_suspend\[0\] begin', t.name)):
+						if(sysvals.suspendmode == 'mem'):
+							tp.S0i3 = True
+							data.dmesg['suspend_machine']['end'] = t.time
+							data.tSuspended = t.time
+					continue
 				# resume_noirq start
 				elif(re.match('dpm_resume_noirq\[.*', t.name)):
 					phase = 'resume_noirq'
@@ -1449,30 +2261,25 @@
 					if(isbegin):
 						data.dmesg[phase]['start'] = t.time
 					continue
-
-				# is this trace event outside of the devices calls
-				if(data.isTraceEventOutsideDeviceCalls(pid, t.time)):
-					# global events (outside device calls) are simply graphed
-					if(name not in testrun.ttemp):
-						testrun.ttemp[name] = []
-					if(isbegin):
-						# create a new list entry
-						testrun.ttemp[name].append(\
-							{'begin': t.time, 'end': t.time})
-					else:
-						if(len(testrun.ttemp[name]) > 0):
-							# if an antry exists, assume this is its end
-							testrun.ttemp[name][-1]['end'] = t.time
-						elif(phase == 'post_resume'):
-							# post resume events can just have ends
-							testrun.ttemp[name].append({
-								'begin': data.dmesg[phase]['start'],
-								'end': t.time})
+				# skip trace events inside devices calls
+				if(not data.isTraceEventOutsideDeviceCalls(pid, t.time)):
+					continue
+				# global events (outside device calls) are graphed
+				if(name not in testrun.ttemp):
+					testrun.ttemp[name] = []
+				if(isbegin):
+					# create a new list entry
+					testrun.ttemp[name].append(\
+						{'begin': t.time, 'end': t.time, 'pid': pid})
 				else:
-					if(isbegin):
-						data.addIntraDevTraceEvent('', name, pid, t.time)
-					else:
-						data.capIntraDevTraceEvent('', name, pid, t.time)
+					if(len(testrun.ttemp[name]) > 0):
+						# if an entry exists, assume this is its end
+						testrun.ttemp[name][-1]['end'] = t.time
+					elif(phase == 'post_resume'):
+						# post resume events can just have ends
+						testrun.ttemp[name].append({
+							'begin': data.dmesg[phase]['start'],
+							'end': t.time})
 			# device callback start
 			elif(t.type == 'device_pm_callback_start'):
 				m = re.match('(?P<drv>.*) (?P<d>.*), parent: *(?P<p>.*), .*',\
@@ -1495,75 +2302,127 @@
 					dev = list[n]
 					dev['length'] = t.time - dev['start']
 					dev['end'] = t.time
+		# kprobe event processing
+		elif(t.fkprobe):
+			kprobename = t.type
+			kprobedata = t.name
+			key = (kprobename, pid)
+			# displayname is generated from kprobe data
+			displayname = ''
+			if(t.fcall):
+				displayname = sysvals.kprobeDisplayName(kprobename, kprobedata)
+				if not displayname:
+					continue
+				if(key not in tp.ktemp):
+					tp.ktemp[key] = []
+				tp.ktemp[key].append({
+					'pid': pid,
+					'begin': t.time,
+					'end': t.time,
+					'name': displayname,
+					'cdata': kprobedata,
+					'proc': m_proc,
+				})
+			elif(t.freturn):
+				if(key not in tp.ktemp) or len(tp.ktemp[key]) < 1:
+					continue
+				e = tp.ktemp[key][-1]
+				if e['begin'] < 0.0 or t.time - e['begin'] < 0.000001:
+					tp.ktemp[key].pop()
+				else:
+					e['end'] = t.time
+					e['rdata'] = kprobedata
 		# callgraph processing
 		elif sysvals.usecallgraph:
-			# this shouldn't happen, but JIC, ignore callgraph data post-res
-			if(phase == 'post_resume'):
-				continue
 			# create a callgraph object for the data
-			if(pid not in testrun.ftemp):
-				testrun.ftemp[pid] = []
-				testrun.ftemp[pid].append(FTraceCallGraph())
+			key = (m_proc, pid)
+			if(key not in testrun.ftemp):
+				testrun.ftemp[key] = []
+				testrun.ftemp[key].append(FTraceCallGraph(pid))
 			# when the call is finished, see which device matches it
-			cg = testrun.ftemp[pid][-1]
-			if(cg.addLine(t, m)):
-				testrun.ftemp[pid].append(FTraceCallGraph())
+			cg = testrun.ftemp[key][-1]
+			if(cg.addLine(t)):
+				testrun.ftemp[key].append(FTraceCallGraph(pid))
 	tf.close()
 
+	if sysvals.suspendmode == 'command':
+		for test in testruns:
+			for p in test.data.phases:
+				if p == 'resume_complete':
+					test.data.dmesg[p]['start'] = test.data.start
+					test.data.dmesg[p]['end'] = test.data.end
+				else:
+					test.data.dmesg[p]['start'] = test.data.start
+					test.data.dmesg[p]['end'] = test.data.start
+			test.data.tSuspended = test.data.start
+			test.data.tResumed = test.data.start
+			test.data.tLow = 0
+			test.data.fwValid = False
+
 	for test in testruns:
 		# add the traceevent data to the device hierarchy
 		if(sysvals.usetraceevents):
+			# add actual trace funcs
 			for name in test.ttemp:
 				for event in test.ttemp[name]:
-					begin = event['begin']
-					end = event['end']
-					# if event starts before timeline start, expand timeline
-					if(begin < test.data.start):
-						test.data.setStart(begin)
-					# if event ends after timeline end, expand the timeline
-					if(end > test.data.end):
-						test.data.setEnd(end)
-					test.data.newActionGlobal(name, begin, end)
+					test.data.newActionGlobal(name, event['begin'], event['end'], event['pid'])
+			# add the kprobe based virtual tracefuncs as actual devices
+			for key in tp.ktemp:
+				name, pid = key
+				if name not in sysvals.tracefuncs:
+					continue
+				for e in tp.ktemp[key]:
+					kb, ke = e['begin'], e['end']
+					if kb == ke or not test.data.isInsideTimeline(kb, ke):
+						continue
+					test.data.newActionGlobal(e['name'], kb, ke, pid)
+			# add config base kprobes and dev kprobes
+			for key in tp.ktemp:
+				name, pid = key
+				if name in sysvals.tracefuncs:
+					continue
+				for e in tp.ktemp[key]:
+					kb, ke = e['begin'], e['end']
+					if kb == ke or not test.data.isInsideTimeline(kb, ke):
+						continue
+					color = sysvals.kprobeColor(e['name'])
+					if name not in sysvals.dev_tracefuncs:
+						# config base kprobe
+						test.data.newActionGlobal(e['name'], kb, ke, -2, color)
+					elif sysvals.usedevsrc:
+						# dev kprobe
+						data.addDeviceFunctionCall(e['name'], name, e['proc'], pid, kb,
+							ke, e['cdata'], e['rdata'])
+		if sysvals.usecallgraph:
+			# add the callgraph data to the device hierarchy
+			sortlist = dict()
+			for key in test.ftemp:
+				proc, pid = key
+				for cg in test.ftemp[key]:
+					if len(cg.list) < 1 or cg.invalid:
+						continue
+					if(not cg.postProcess()):
+						id = 'task %s' % (pid)
+						vprint('Sanity check failed for '+\
+							id+', ignoring this callback')
+						continue
+					# match cg data to devices
+					if sysvals.suspendmode == 'command' or not cg.deviceMatch(pid, test.data):
+						sortkey = '%f%f%d' % (cg.start, cg.end, pid)
+						sortlist[sortkey] = cg
+			# create blocks for orphan cg data
+			for sortkey in sorted(sortlist):
+				cg = sortlist[sortkey]
+				name = cg.list[0].name
+				if sysvals.isCallgraphFunc(name):
+					vprint('Callgraph found for task %d: %.3fms, %s' % (cg.pid, (cg.end - cg.start)*1000, name))
+					cg.newActionFromFunction(test.data)
 
-		# add the callgraph data to the device hierarchy
-		borderphase = {
-			'dpm_prepare': 'suspend_prepare',
-			'dpm_complete': 'resume_complete'
-		}
-		for pid in test.ftemp:
-			for cg in test.ftemp[pid]:
-				if len(cg.list) < 2:
-					continue
-				if(not cg.sanityCheck()):
-					id = 'task %s cpu %s' % (pid, m.group('cpu'))
-					vprint('Sanity check failed for '+\
-						id+', ignoring this callback')
-					continue
-				callstart = cg.start
-				callend = cg.end
-				if(cg.list[0].name in borderphase):
-					p = borderphase[cg.list[0].name]
-					list = test.data.dmesg[p]['list']
-					for devname in list:
-						dev = list[devname]
-						if(pid == dev['pid'] and
-							callstart <= dev['start'] and
-							callend >= dev['end']):
-							dev['ftrace'] = cg.slice(dev['start'], dev['end'])
-					continue
-				if(cg.list[0].name != 'dpm_run_callback'):
-					continue
-				for p in test.data.phases:
-					if(test.data.dmesg[p]['start'] <= callstart and
-						callstart <= test.data.dmesg[p]['end']):
-						list = test.data.dmesg[p]['list']
-						for devname in list:
-							dev = list[devname]
-							if(pid == dev['pid'] and
-								callstart <= dev['start'] and
-								callend >= dev['end']):
-								dev['ftrace'] = cg
-						break
+	if sysvals.suspendmode == 'command':
+		if(sysvals.verbose):
+			for data in testdata:
+				data.printDetails()
+		return testdata
 
 	# fill in any missing phases
 	for data in testdata:
@@ -1587,14 +2446,52 @@
 		if(sysvals.verbose):
 			data.printDetails()
 
-	# add the time in between the tests as a new phase so we can see it
-	if(len(testdata) > 1):
-		t1e = testdata[0].getEnd()
-		t2s = testdata[-1].getStart()
-		testdata[-1].newPhaseWithSingleAction('user mode', \
-			'user mode', t1e, t2s, '#FF9966')
 	return testdata
 
+# Function: loadRawKernelLog
+# Description:
+#	 Load a raw kernel log that wasn't created by this tool, it might be
+#	 possible to extract a valid suspend/resume log
+def loadRawKernelLog(dmesgfile):
+	global sysvals
+
+	stamp = {'time': '', 'host': '', 'mode': 'mem', 'kernel': ''}
+	stamp['time'] = datetime.now().strftime('%B %d %Y, %I:%M:%S %p')
+	stamp['host'] = sysvals.hostname
+
+	testruns = []
+	data = 0
+	lf = open(dmesgfile, 'r')
+	for line in lf:
+		line = line.replace('\r\n', '')
+		idx = line.find('[')
+		if idx > 1:
+			line = line[idx:]
+		m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line)
+		if(not m):
+			continue
+		msg = m.group("msg")
+		m = re.match('PM: Syncing filesystems.*', msg)
+		if(m):
+			if(data):
+				testruns.append(data)
+			data = Data(len(testruns))
+			data.stamp = stamp
+		if(data):
+			m = re.match('.* *(?P<k>[0-9]\.[0-9]{2}\.[0-9]-.*) .*', msg)
+			if(m):
+				stamp['kernel'] = m.group('k')
+			m = re.match('PM: Preparing system for (?P<m>.*) sleep', msg)
+			if(m):
+				stamp['mode'] = m.group('m')
+			data.dmesgtext.append(line)
+	if(data):
+		testruns.append(data)
+		sysvals.stamp = stamp
+		sysvals.suspendmode = stamp['mode']
+	lf.close()
+	return testruns
+
 # Function: loadKernelLog
 # Description:
 #	 [deprecated for kernel 3.15.0 or newer]
@@ -1607,9 +2504,10 @@
 
 	vprint('Analyzing the dmesg data...')
 	if(os.path.exists(sysvals.dmesgfile) == False):
-		doError('%s doesnt exist' % sysvals.dmesgfile, False)
+		doError('%s does not exist' % sysvals.dmesgfile, False)
 
-	# there can be multiple test runs in a single file delineated by stamps
+	# there can be multiple test runs in a single file
+	tp = TestProps()
 	testruns = []
 	data = 0
 	lf = open(sysvals.dmesgfile, 'r')
@@ -1620,35 +2518,43 @@
 			line = line[idx:]
 		m = re.match(sysvals.stampfmt, line)
 		if(m):
-			if(data):
-				testruns.append(data)
-			data = Data(len(testruns))
-			parseStamp(m, data)
-			continue
-		if(not data):
+			tp.stamp = line
 			continue
 		m = re.match(sysvals.firmwarefmt, line)
 		if(m):
-			data.fwSuspend = int(m.group('s'))
-			data.fwResume = int(m.group('r'))
-			if(data.fwSuspend > 0 or data.fwResume > 0):
-				data.fwValid = True
+			tp.fwdata.append((int(m.group('s')), int(m.group('r'))))
 			continue
 		m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line)
-		if(m):
-			data.dmesgtext.append(line)
-			if(re.match('ACPI: resume from mwait', m.group('msg'))):
-				print('NOTE: This suspend appears to be freeze rather than'+\
-					' %s, it will be treated as such' % sysvals.suspendmode)
-				sysvals.suspendmode = 'freeze'
-		else:
-			vprint('ignoring dmesg line: %s' % line.replace('\n', ''))
-	testruns.append(data)
+		if(not m):
+			continue
+		msg = m.group("msg")
+		if(re.match('PM: Syncing filesystems.*', msg)):
+			if(data):
+				testruns.append(data)
+			data = Data(len(testruns))
+			parseStamp(tp.stamp, data)
+			if len(tp.fwdata) > data.testnumber:
+				data.fwSuspend, data.fwResume = tp.fwdata[data.testnumber]
+				if(data.fwSuspend > 0 or data.fwResume > 0):
+					data.fwValid = True
+		if(re.match('ACPI: resume from mwait', msg)):
+			print('NOTE: This suspend appears to be freeze rather than'+\
+				' %s, it will be treated as such' % sysvals.suspendmode)
+			sysvals.suspendmode = 'freeze'
+		if(not data):
+			continue
+		data.dmesgtext.append(line)
+	if(data):
+		testruns.append(data)
 	lf.close()
 
-	if(not data):
-		print('ERROR: analyze_suspend header missing from dmesg log')
-		sys.exit()
+	if(len(testruns) < 1):
+		# bad log, but see if you can extract something meaningful anyway
+		testruns = loadRawKernelLog(sysvals.dmesgfile)
+
+	if(len(testruns) < 1):
+		doError(' dmesg log is completely unreadable: %s' \
+			% sysvals.dmesgfile, False)
 
 	# fix lines with same timestamp/function with the call and return swapped
 	for data in testruns:
@@ -1865,7 +2771,8 @@
 						actions[a] = []
 					actions[a].append({'begin': ktime, 'end': ktime})
 				if(re.match(at[a]['emsg'], msg)):
-					actions[a][-1]['end'] = ktime
+					if(a in actions):
+						actions[a][-1]['end'] = ktime
 			# now look for CPU on/off events
 			if(re.match('Disabling non-boot CPUs .*', msg)):
 				# start of first cpu suspend
@@ -1912,15 +2819,7 @@
 	# fill in any actions we've found
 	for name in actions:
 		for event in actions[name]:
-			begin = event['begin']
-			end = event['end']
-			# if event starts before timeline start, expand timeline
-			if(begin < data.start):
-				data.setStart(begin)
-			# if event ends after timeline end, expand the timeline
-			if(end > data.end):
-				data.setEnd(end)
-			data.newActionGlobal(name, begin, end)
+			data.newActionGlobal(name, event['begin'], event['end'])
 
 	if(sysvals.verbose):
 		data.printDetails()
@@ -1929,92 +2828,6 @@
 	data.fixupInitcallsThatDidntReturn()
 	return True
 
-# Function: setTimelineRows
-# Description:
-#	 Organize the timeline entries into the smallest
-#	 number of rows possible, with no entry overlapping
-# Arguments:
-#	 list: the list of devices/actions for a single phase
-#	 sortedkeys: cronologically sorted key list to use
-# Output:
-#	 The total number of rows needed to display this phase of the timeline
-def setTimelineRows(list, sortedkeys):
-
-	# clear all rows and set them to undefined
-	remaining = len(list)
-	rowdata = dict()
-	row = 0
-	for item in list:
-		list[item]['row'] = -1
-
-	# try to pack each row with as many ranges as possible
-	while(remaining > 0):
-		if(row not in rowdata):
-			rowdata[row] = []
-		for item in sortedkeys:
-			if(list[item]['row'] < 0):
-				s = list[item]['start']
-				e = list[item]['end']
-				valid = True
-				for ritem in rowdata[row]:
-					rs = ritem['start']
-					re = ritem['end']
-					if(not (((s <= rs) and (e <= rs)) or
-						((s >= re) and (e >= re)))):
-						valid = False
-						break
-				if(valid):
-					rowdata[row].append(list[item])
-					list[item]['row'] = row
-					remaining -= 1
-		row += 1
-	return row
-
-# Function: createTimeScale
-# Description:
-#	 Create the timescale header for the html timeline
-# Arguments:
-#	 t0: start time (suspend begin)
-#	 tMax: end time (resume end)
-#	 tSuspend: time when suspend occurs, i.e. the zero time
-# Output:
-#	 The html code needed to display the time scale
-def createTimeScale(t0, tMax, tSuspended):
-	timescale = '<div class="t" style="right:{0}%">{1}</div>\n'
-	output = '<div id="timescale">\n'
-
-	# set scale for timeline
-	tTotal = tMax - t0
-	tS = 0.1
-	if(tTotal <= 0):
-		return output
-	if(tTotal > 4):
-		tS = 1
-	if(tSuspended < 0):
-		for i in range(int(tTotal/tS)+1):
-			pos = '%0.3f' % (100 - ((float(i)*tS*100)/tTotal))
-			if(i > 0):
-				val = '%0.fms' % (float(i)*tS*1000)
-			else:
-				val = ''
-			output += timescale.format(pos, val)
-	else:
-		tSuspend = tSuspended - t0
-		divTotal = int(tTotal/tS) + 1
-		divSuspend = int(tSuspend/tS)
-		s0 = (tSuspend - tS*divSuspend)*100/tTotal
-		for i in range(divTotal):
-			pos = '%0.3f' % (100 - ((float(i)*tS*100)/tTotal) - s0)
-			if((i == 0) and (s0 < 3)):
-				val = ''
-			elif(i == divSuspend):
-				val = 'S/R'
-			else:
-				val = '%0.fms' % (float(i-divSuspend)*tS*1000)
-			output += timescale.format(pos, val)
-	output += '</div>\n'
-	return output
-
 # Function: createHTMLSummarySimple
 # Description:
 #	 Create summary html file for a series of tests
@@ -2146,6 +2959,32 @@
 	hf.write('</body>\n</html>\n')
 	hf.close()
 
+def htmlTitle():
+	global sysvals
+	modename = {
+		'freeze': 'Freeze (S0)',
+		'standby': 'Standby (S1)',
+		'mem': 'Suspend (S3)',
+		'disk': 'Hibernate (S4)'
+	}
+	kernel = sysvals.stamp['kernel']
+	host = sysvals.hostname[0].upper()+sysvals.hostname[1:]
+	mode = sysvals.suspendmode
+	if sysvals.suspendmode in modename:
+		mode = modename[sysvals.suspendmode]
+	return host+' '+mode+' '+kernel
+
+def ordinal(value):
+	suffix = 'th'
+	if value < 10 or value > 19:
+		if value % 10 == 1:
+			suffix = 'st'
+		elif value % 10 == 2:
+			suffix = 'nd'
+		elif value % 10 == 3:
+			suffix = 'rd'
+	return '%d%s' % (value, suffix)
+
 # Function: createHTML
 # Description:
 #	 Create the output html file from the resident test data
@@ -2156,6 +2995,10 @@
 def createHTML(testruns):
 	global sysvals
 
+	if len(testruns) < 1:
+		print('ERROR: Not enough test data to build a timeline')
+		return
+
 	for data in testruns:
 		data.normalizeTime(testruns[-1].tSuspended)
 
@@ -2163,16 +3006,18 @@
 	if len(testruns) > 1:
 		x2changes = ['1', 'relative']
 	# html function templates
+	headline_version = '<div class="version"><a href="https://01.org/suspendresume">AnalyzeSuspend v%s</a></div>' % sysvals.version
 	headline_stamp = '<div class="stamp">{0} {1} {2} {3}</div>\n'
 	html_devlist1 = '<button id="devlist1" class="devlist" style="float:left;">Device Detail%s</button>' % x2changes[0]
 	html_zoombox = '<center><button id="zoomin">ZOOM IN</button><button id="zoomout">ZOOM OUT</button><button id="zoomdef">ZOOM 1:1</button></center>\n'
 	html_devlist2 = '<button id="devlist2" class="devlist" style="float:right;">Device Detail2</button>\n'
 	html_timeline = '<div id="dmesgzoombox" class="zoombox">\n<div id="{0}" class="timeline" style="height:{1}px">\n'
-	html_device = '<div id="{0}" title="{1}" class="thread" style="left:{2}%;top:{3}%;height:{4}%;width:{5}%;">{6}</div>\n'
-	html_traceevent = '<div title="{0}" class="traceevent" style="left:{1}%;top:{2}%;height:{3}%;width:{4}%;border:1px solid {5};background-color:{5}">{6}</div>\n'
-	html_phase = '<div class="phase" style="left:{0}%;width:{1}%;top:{2}%;height:{3}%;background-color:{4}">{5}</div>\n'
+	html_tblock = '<div id="block{0}" class="tblock" style="left:{1}%;width:{2}%;">\n'
+	html_device = '<div id="{0}" title="{1}" class="thread{7}" style="left:{2}%;top:{3}px;height:{4}px;width:{5}%;{8}">{6}</div>\n'
+	html_traceevent = '<div title="{0}" class="traceevent" style="left:{1}%;top:{2}px;height:{3}px;width:{4}%;line-height:{3}px;">{5}</div>\n'
+	html_phase = '<div class="phase" style="left:{0}%;width:{1}%;top:{2}px;height:{3}px;background-color:{4}">{5}</div>\n'
 	html_phaselet = '<div id="{0}" class="phaselet" style="left:{1}%;width:{2}%;background-color:{3}"></div>\n'
-	html_legend = '<div class="square" style="left:{0}%;background-color:{1}">&nbsp;{2}</div>\n'
+	html_legend = '<div id="p{3}" class="square" style="left:{0}%;background-color:{1}">&nbsp;{2}</div>\n'
 	html_timetotal = '<table class="time1">\n<tr>'\
 		'<td class="green">{2} Suspend Time: <b>{0} ms</b></td>'\
 		'<td class="yellow">{2} Resume Time: <b>{1} ms</b></td>'\
@@ -2182,6 +3027,10 @@
 		'<td class="gray">'+sysvals.suspendmode+' time: <b>{1} ms</b></td>'\
 		'<td class="yellow">{3} Resume Time: <b>{2} ms</b></td>'\
 		'</tr>\n</table>\n'
+	html_timetotal3 = '<table class="time1">\n<tr>'\
+		'<td class="green">Execution Time: <b>{0} ms</b></td>'\
+		'<td class="yellow">Command: <b>{1}</b></td>'\
+		'</tr>\n</table>\n'
 	html_timegroups = '<table class="time2">\n<tr>'\
 		'<td class="green">{4}Kernel Suspend: {0} ms</td>'\
 		'<td class="purple">{4}Firmware Suspend: {1} ms</td>'\
@@ -2189,12 +3038,21 @@
 		'<td class="yellow">{4}Kernel Resume: {3} ms</td>'\
 		'</tr>\n</table>\n'
 
+	# html format variables
+	rowheight = 30
+	devtextS = '14px'
+	devtextH = '30px'
+	hoverZ = 'z-index:10;'
+
+	if sysvals.usedevsrc:
+		hoverZ = ''
+
 	# device timeline
 	vprint('Creating Device Timeline...')
-	devtl = Timeline()
+
+	devtl = Timeline(rowheight)
 
 	# Generate the header for this timeline
-	textnum = ['First', 'Second']
 	for data in testruns:
 		tTotal = data.end - data.start
 		tEnd = data.dmesg['resume_complete']['end']
@@ -2203,7 +3061,17 @@
 			sys.exit()
 		if(data.tLow > 0):
 			low_time = '%.0f'%(data.tLow*1000)
-		if data.fwValid:
+		if sysvals.suspendmode == 'command':
+			run_time = '%.0f'%((data.end-data.start)*1000)
+			if sysvals.testcommand:
+				testdesc = sysvals.testcommand
+			else:
+				testdesc = 'unknown'
+			if(len(testruns) > 1):
+				testdesc = ordinal(data.testnumber+1)+' '+testdesc
+			thtml = html_timetotal3.format(run_time, testdesc)
+			devtl.html['header'] += thtml
+		elif data.fwValid:
 			suspend_time = '%.0f'%((data.tSuspended-data.start)*1000 + \
 				(data.fwSuspend/1000000.0))
 			resume_time = '%.0f'%((tEnd-data.tSuspended)*1000 + \
@@ -2211,7 +3079,7 @@
 			testdesc1 = 'Total'
 			testdesc2 = ''
 			if(len(testruns) > 1):
-				testdesc1 = testdesc2 = textnum[data.testnumber]
+				testdesc1 = testdesc2 = ordinal(data.testnumber+1)
 				testdesc2 += ' '
 			if(data.tLow == 0):
 				thtml = html_timetotal.format(suspend_time, \
@@ -2219,28 +3087,28 @@
 			else:
 				thtml = html_timetotal2.format(suspend_time, low_time, \
 					resume_time, testdesc1)
-			devtl.html['timeline'] += thtml
+			devtl.html['header'] += thtml
 			sktime = '%.3f'%((data.dmesg['suspend_machine']['end'] - \
 				data.getStart())*1000)
 			sftime = '%.3f'%(data.fwSuspend / 1000000.0)
 			rftime = '%.3f'%(data.fwResume / 1000000.0)
-			rktime = '%.3f'%((data.getEnd() - \
+			rktime = '%.3f'%((data.dmesg['resume_complete']['end'] - \
 				data.dmesg['resume_machine']['start'])*1000)
-			devtl.html['timeline'] += html_timegroups.format(sktime, \
+			devtl.html['header'] += html_timegroups.format(sktime, \
 				sftime, rftime, rktime, testdesc2)
 		else:
 			suspend_time = '%.0f'%((data.tSuspended-data.start)*1000)
 			resume_time = '%.0f'%((tEnd-data.tSuspended)*1000)
 			testdesc = 'Kernel'
 			if(len(testruns) > 1):
-				testdesc = textnum[data.testnumber]+' '+testdesc
+				testdesc = ordinal(data.testnumber+1)+' '+testdesc
 			if(data.tLow == 0):
 				thtml = html_timetotal.format(suspend_time, \
 					resume_time, testdesc)
 			else:
 				thtml = html_timetotal2.format(suspend_time, low_time, \
 					resume_time, testdesc)
-			devtl.html['timeline'] += thtml
+			devtl.html['header'] += thtml
 
 	# time scale for potentially multiple datasets
 	t0 = testruns[0].start
@@ -2249,153 +3117,241 @@
 	tTotal = tMax - t0
 
 	# determine the maximum number of rows we need to draw
-	timelinerows = 0
 	for data in testruns:
-		for phase in data.dmesg:
-			list = data.dmesg[phase]['list']
-			rows = setTimelineRows(list, list)
-			data.dmesg[phase]['row'] = rows
-			if(rows > timelinerows):
-				timelinerows = rows
+		data.selectTimelineDevices('%f', tTotal, sysvals.mindevlen)
+		for group in data.devicegroups:
+			devlist = []
+			for phase in group:
+				for devname in data.tdevlist[phase]:
+					devlist.append((phase,devname))
+			devtl.getPhaseRows(data.dmesg, devlist)
+	devtl.calcTotalRows()
 
-	# calculate the timeline height and create bounding box, add buttons
-	devtl.setRows(timelinerows + 1)
-	devtl.html['timeline'] += html_devlist1
-	if len(testruns) > 1:
-		devtl.html['timeline'] += html_devlist2
+	# create bounding box, add buttons
+	if sysvals.suspendmode != 'command':
+		devtl.html['timeline'] += html_devlist1
+		if len(testruns) > 1:
+			devtl.html['timeline'] += html_devlist2
 	devtl.html['timeline'] += html_zoombox
 	devtl.html['timeline'] += html_timeline.format('dmesg', devtl.height)
 
-	# draw the colored boxes for each of the phases
-	for data in testruns:
-		for b in data.dmesg:
-			phase = data.dmesg[b]
-			length = phase['end']-phase['start']
-			left = '%.3f' % (((phase['start']-t0)*100.0)/tTotal)
-			width = '%.3f' % ((length*100.0)/tTotal)
-			devtl.html['timeline'] += html_phase.format(left, width, \
-				'%.3f'%devtl.scaleH, '%.3f'%(100-devtl.scaleH), \
-				data.dmesg[b]['color'], '')
+	# draw the full timeline
+	phases = {'suspend':[],'resume':[]}
+	for phase in data.dmesg:
+		if 'resume' in phase:
+			phases['resume'].append(phase)
+		else:
+			phases['suspend'].append(phase)
 
-	# draw the time scale, try to make the number of labels readable
-	devtl.html['scale'] = createTimeScale(t0, tMax, tSuspended)
-	devtl.html['timeline'] += devtl.html['scale']
+	# draw each test run chronologically
 	for data in testruns:
-		for b in data.dmesg:
-			phaselist = data.dmesg[b]['list']
-			for d in phaselist:
-				name = d
-				drv = ''
-				dev = phaselist[d]
-				if(d in sysvals.altdevname):
-					name = sysvals.altdevname[d]
-				if('drv' in dev and dev['drv']):
-					drv = ' {%s}' % dev['drv']
-				height = (100.0 - devtl.scaleH)/data.dmesg[b]['row']
-				top = '%.3f' % ((dev['row']*height) + devtl.scaleH)
-				left = '%.3f' % (((dev['start']-t0)*100)/tTotal)
-				width = '%.3f' % (((dev['end']-dev['start'])*100)/tTotal)
-				length = ' (%0.3f ms) ' % ((dev['end']-dev['start'])*1000)
-				color = 'rgba(204,204,204,0.5)'
-				devtl.html['timeline'] += html_device.format(dev['id'], \
-					d+drv+length+b, left, top, '%.3f'%height, width, name+drv)
-
-	# draw any trace events found
-	for data in testruns:
-		for b in data.dmesg:
-			phaselist = data.dmesg[b]['list']
-			for name in phaselist:
-				dev = phaselist[name]
-				if('traceevents' in dev):
-					vprint('Debug trace events found for device %s' % name)
-					vprint('%20s %20s %10s %8s' % ('action', \
+		# if nore than one test, draw a block to represent user mode
+		if(data.testnumber > 0):
+			m0 = testruns[data.testnumber-1].end
+			mMax = testruns[data.testnumber].start
+			mTotal = mMax - m0
+			name = 'usermode%d' % data.testnumber
+			top = '%d' % devtl.scaleH
+			left = '%f' % (((m0-t0)*100.0)/tTotal)
+			width = '%f' % ((mTotal*100.0)/tTotal)
+			title = 'user mode (%0.3f ms) ' % (mTotal*1000)
+			devtl.html['timeline'] += html_device.format(name, \
+				title, left, top, '%d'%devtl.bodyH, width, '', '', '')
+		# now draw the actual timeline blocks
+		for dir in phases:
+			# draw suspend and resume blocks separately
+			bname = '%s%d' % (dir[0], data.testnumber)
+			if dir == 'suspend':
+				m0 = testruns[data.testnumber].start
+				mMax = testruns[data.testnumber].tSuspended
+				mTotal = mMax - m0
+				left = '%f' % (((m0-t0)*100.0)/tTotal)
+			else:
+				m0 = testruns[data.testnumber].tSuspended
+				mMax = testruns[data.testnumber].end
+				mTotal = mMax - m0
+				left = '%f' % ((((m0-t0)*100.0)+sysvals.srgap/2)/tTotal)
+			# if a timeline block is 0 length, skip altogether
+			if mTotal == 0:
+				continue
+			width = '%f' % (((mTotal*100.0)-sysvals.srgap/2)/tTotal)
+			devtl.html['timeline'] += html_tblock.format(bname, left, width)
+			for b in sorted(phases[dir]):
+				# draw the phase color background
+				phase = data.dmesg[b]
+				length = phase['end']-phase['start']
+				left = '%f' % (((phase['start']-m0)*100.0)/mTotal)
+				width = '%f' % ((length*100.0)/mTotal)
+				devtl.html['timeline'] += html_phase.format(left, width, \
+					'%.3f'%devtl.scaleH, '%.3f'%devtl.bodyH, \
+					data.dmesg[b]['color'], '')
+				# draw the devices for this phase
+				phaselist = data.dmesg[b]['list']
+				for d in data.tdevlist[b]:
+					name = d
+					drv = ''
+					dev = phaselist[d]
+					xtraclass = ''
+					xtrainfo = ''
+					xtrastyle = ''
+					if 'htmlclass' in dev:
+						xtraclass = dev['htmlclass']
+						xtrainfo = dev['htmlclass']
+					if 'color' in dev:
+						xtrastyle = 'background-color:%s;' % dev['color']
+					if(d in sysvals.devprops):
+						name = sysvals.devprops[d].altName(d)
+						xtraclass = sysvals.devprops[d].xtraClass()
+						xtrainfo = sysvals.devprops[d].xtraInfo()
+					if('drv' in dev and dev['drv']):
+						drv = ' {%s}' % dev['drv']
+					rowheight = devtl.phaseRowHeight(b, dev['row'])
+					rowtop = devtl.phaseRowTop(b, dev['row'])
+					top = '%.3f' % (rowtop + devtl.scaleH)
+					left = '%f' % (((dev['start']-m0)*100)/mTotal)
+					width = '%f' % (((dev['end']-dev['start'])*100)/mTotal)
+					length = ' (%0.3f ms) ' % ((dev['end']-dev['start'])*1000)
+					if sysvals.suspendmode == 'command':
+						title = name+drv+xtrainfo+length+'cmdexec'
+					else:
+						title = name+drv+xtrainfo+length+b
+					devtl.html['timeline'] += html_device.format(dev['id'], \
+						title, left, top, '%.3f'%rowheight, width, \
+						d+drv, xtraclass, xtrastyle)
+					if('src' not in dev):
+						continue
+					# draw any trace events for this device
+					vprint('Debug trace events found for device %s' % d)
+					vprint('%20s %20s %10s %8s' % ('title', \
 						'name', 'time(ms)', 'length(ms)'))
-					for e in dev['traceevents']:
-						vprint('%20s %20s %10.3f %8.3f' % (e.action, \
-							e.name, e.time*1000, e.length*1000))
-						height = (100.0 - devtl.scaleH)/data.dmesg[b]['row']
-						top = '%.3f' % ((dev['row']*height) + devtl.scaleH)
-						left = '%.3f' % (((e.time-t0)*100)/tTotal)
-						width = '%.3f' % (e.length*100/tTotal)
+					for e in dev['src']:
+						vprint('%20s %20s %10.3f %8.3f' % (e.title, \
+							e.text, e.time*1000, e.length*1000))
+						height = devtl.rowH
+						top = '%.3f' % (rowtop + devtl.scaleH + (e.row*devtl.rowH))
+						left = '%f' % (((e.time-m0)*100)/mTotal)
+						width = '%f' % (e.length*100/mTotal)
 						color = 'rgba(204,204,204,0.5)'
 						devtl.html['timeline'] += \
-							html_traceevent.format(e.action+' '+e.name, \
+							html_traceevent.format(e.title, \
 								left, top, '%.3f'%height, \
-								width, e.color, '')
+								width, e.text)
+			# draw the time scale, try to make the number of labels readable
+			devtl.html['timeline'] += devtl.createTimeScale(m0, mMax, tTotal, dir)
+			devtl.html['timeline'] += '</div>\n'
 
 	# timeline is finished
 	devtl.html['timeline'] += '</div>\n</div>\n'
 
 	# draw a legend which describes the phases by color
-	data = testruns[-1]
-	devtl.html['legend'] = '<div class="legend">\n'
-	pdelta = 100.0/len(data.phases)
-	pmargin = pdelta / 4.0
-	for phase in data.phases:
-		order = '%.2f' % ((data.dmesg[phase]['order'] * pdelta) + pmargin)
-		name = string.replace(phase, '_', ' &nbsp;')
-		devtl.html['legend'] += html_legend.format(order, \
-			data.dmesg[phase]['color'], name)
-	devtl.html['legend'] += '</div>\n'
+	if sysvals.suspendmode != 'command':
+		data = testruns[-1]
+		devtl.html['legend'] = '<div class="legend">\n'
+		pdelta = 100.0/len(data.phases)
+		pmargin = pdelta / 4.0
+		for phase in data.phases:
+			tmp = phase.split('_')
+			id = tmp[0][0]
+			if(len(tmp) > 1):
+				id += tmp[1][0]
+			order = '%.2f' % ((data.dmesg[phase]['order'] * pdelta) + pmargin)
+			name = string.replace(phase, '_', ' &nbsp;')
+			devtl.html['legend'] += html_legend.format(order, \
+				data.dmesg[phase]['color'], name, id)
+		devtl.html['legend'] += '</div>\n'
 
 	hf = open(sysvals.htmlfile, 'w')
-	thread_height = 0
+
+	if not sysvals.cgexp:
+		cgchk = 'checked'
+		cgnchk = 'not(:checked)'
+	else:
+		cgchk = 'not(:checked)'
+		cgnchk = 'checked'
 
 	# write the html header first (html head, css code, up to body start)
 	html_header = '<!DOCTYPE html>\n<html>\n<head>\n\
 	<meta http-equiv="content-type" content="text/html; charset=UTF-8">\n\
-	<title>AnalyzeSuspend</title>\n\
+	<title>'+htmlTitle()+'</title>\n\
 	<style type=\'text/css\'>\n\
-		body {overflow-y: scroll;}\n\
-		.stamp {width: 100%;text-align:center;background-color:gray;line-height:30px;color:white;font: 25px Arial;}\n\
-		.callgraph {margin-top: 30px;box-shadow: 5px 5px 20px black;}\n\
-		.callgraph article * {padding-left: 28px;}\n\
-		h1 {color:black;font: bold 30px Times;}\n\
-		t0 {color:black;font: bold 30px Times;}\n\
-		t1 {color:black;font: 30px Times;}\n\
-		t2 {color:black;font: 25px Times;}\n\
-		t3 {color:black;font: 20px Times;white-space:nowrap;}\n\
-		t4 {color:black;font: bold 30px Times;line-height:60px;white-space:nowrap;}\n\
+		body {overflow-y:scroll;}\n\
+		.stamp {width:100%;text-align:center;background-color:gray;line-height:30px;color:white;font:25px Arial;}\n\
+		.callgraph {margin-top:30px;box-shadow:5px 5px 20px black;}\n\
+		.callgraph article * {padding-left:28px;}\n\
+		h1 {color:black;font:bold 30px Times;}\n\
+		t0 {color:black;font:bold 30px Times;}\n\
+		t1 {color:black;font:30px Times;}\n\
+		t2 {color:black;font:25px Times;}\n\
+		t3 {color:black;font:20px Times;white-space:nowrap;}\n\
+		t4 {color:black;font:bold 30px Times;line-height:60px;white-space:nowrap;}\n\
+		cS {color:blue;font:bold 11px Times;}\n\
+		cR {color:red;font:bold 11px Times;}\n\
 		table {width:100%;}\n\
 		.gray {background-color:rgba(80,80,80,0.1);}\n\
 		.green {background-color:rgba(204,255,204,0.4);}\n\
 		.purple {background-color:rgba(128,0,128,0.2);}\n\
 		.yellow {background-color:rgba(255,255,204,0.4);}\n\
-		.time1 {font: 22px Arial;border:1px solid;}\n\
-		.time2 {font: 15px Arial;border-bottom:1px solid;border-left:1px solid;border-right:1px solid;}\n\
-		td {text-align: center;}\n\
+		.time1 {font:22px Arial;border:1px solid;}\n\
+		.time2 {font:15px Arial;border-bottom:1px solid;border-left:1px solid;border-right:1px solid;}\n\
+		td {text-align:center;}\n\
 		r {color:#500000;font:15px Tahoma;}\n\
 		n {color:#505050;font:15px Tahoma;}\n\
-		.tdhl {color: red;}\n\
-		.hide {display: none;}\n\
-		.pf {display: none;}\n\
-		.pf:checked + label {background: url(\'data:image/svg+xml;utf,<?xml version="1.0" standalone="no"?><svg xmlns="http://www.w3.org/2000/svg" height="18" width="18" version="1.1"><circle cx="9" cy="9" r="8" stroke="black" stroke-width="1" fill="white"/><rect x="4" y="8" width="10" height="2" style="fill:black;stroke-width:0"/><rect x="8" y="4" width="2" height="10" style="fill:black;stroke-width:0"/></svg>\') no-repeat left center;}\n\
-		.pf:not(:checked) ~ label {background: url(\'data:image/svg+xml;utf,<?xml version="1.0" standalone="no"?><svg xmlns="http://www.w3.org/2000/svg" height="18" width="18" version="1.1"><circle cx="9" cy="9" r="8" stroke="black" stroke-width="1" fill="white"/><rect x="4" y="8" width="10" height="2" style="fill:black;stroke-width:0"/></svg>\') no-repeat left center;}\n\
-		.pf:checked ~ *:not(:nth-child(2)) {display: none;}\n\
-		.zoombox {position: relative; width: 100%; overflow-x: scroll;}\n\
-		.timeline {position: relative; font-size: 14px;cursor: pointer;width: 100%; overflow: hidden; background-color:#dddddd;}\n\
-		.thread {position: absolute; height: '+'%.3f'%thread_height+'%; overflow: hidden; line-height: 30px; border:1px solid;text-align:center;white-space:nowrap;background-color:rgba(204,204,204,0.5);}\n\
-		.thread:hover {background-color:white;border:1px solid red;z-index:10;}\n\
-		.hover {background-color:white;border:1px solid red;z-index:10;}\n\
-		.traceevent {position: absolute;opacity: 0.3;height: '+'%.3f'%thread_height+'%;width:0;overflow:hidden;line-height:30px;text-align:center;white-space:nowrap;}\n\
-		.phase {position: absolute;overflow: hidden;border:0px;text-align:center;}\n\
+		.tdhl {color:red;}\n\
+		.hide {display:none;}\n\
+		.pf {display:none;}\n\
+		.pf:'+cgchk+' + label {background:url(\'data:image/svg+xml;utf,<?xml version="1.0" standalone="no"?><svg xmlns="http://www.w3.org/2000/svg" height="18" width="18" version="1.1"><circle cx="9" cy="9" r="8" stroke="black" stroke-width="1" fill="white"/><rect x="4" y="8" width="10" height="2" style="fill:black;stroke-width:0"/><rect x="8" y="4" width="2" height="10" style="fill:black;stroke-width:0"/></svg>\') no-repeat left center;}\n\
+		.pf:'+cgnchk+' ~ label {background:url(\'data:image/svg+xml;utf,<?xml version="1.0" standalone="no"?><svg xmlns="http://www.w3.org/2000/svg" height="18" width="18" version="1.1"><circle cx="9" cy="9" r="8" stroke="black" stroke-width="1" fill="white"/><rect x="4" y="8" width="10" height="2" style="fill:black;stroke-width:0"/></svg>\') no-repeat left center;}\n\
+		.pf:'+cgchk+' ~ *:not(:nth-child(2)) {display:none;}\n\
+		.zoombox {position:relative;width:100%;overflow-x:scroll;}\n\
+		.timeline {position:relative;font-size:14px;cursor:pointer;width:100%; overflow:hidden;background:linear-gradient(#cccccc, white);}\n\
+		.thread {position:absolute;height:0%;overflow:hidden;line-height:'+devtextH+';font-size:'+devtextS+';border:1px solid;text-align:center;white-space:nowrap;background-color:rgba(204,204,204,0.5);}\n\
+		.thread.sync {background-color:'+sysvals.synccolor+';}\n\
+		.thread.bg {background-color:'+sysvals.kprobecolor+';}\n\
+		.thread:hover {background-color:white;border:1px solid red;'+hoverZ+'}\n\
+		.hover {background-color:white;border:1px solid red;'+hoverZ+'}\n\
+		.hover.sync {background-color:white;}\n\
+		.hover.bg {background-color:white;}\n\
+		.traceevent {position:absolute;font-size:10px;overflow:hidden;color:black;text-align:center;white-space:nowrap;border-radius:5px;border:1px solid black;background:linear-gradient(to bottom right,rgba(204,204,204,1),rgba(150,150,150,1));}\n\
+		.traceevent:hover {background:white;}\n\
+		.phase {position:absolute;overflow:hidden;border:0px;text-align:center;}\n\
 		.phaselet {position:absolute;overflow:hidden;border:0px;text-align:center;height:100px;font-size:24px;}\n\
-		.t {position:absolute;top:0%;height:100%;border-right:1px solid black;}\n\
-		.legend {position: relative; width: 100%; height: 40px; text-align: center;margin-bottom:20px}\n\
-		.legend .square {position:absolute;top:10px; width: 0px;height: 20px;border:1px solid;padding-left:20px;}\n\
+		.t {z-index:2;position:absolute;pointer-events:none;top:0%;height:100%;border-right:1px solid black;}\n\
+		.legend {position:relative; width:100%; height:40px; text-align:center;margin-bottom:20px}\n\
+		.legend .square {position:absolute;cursor:pointer;top:10px; width:0px;height:20px;border:1px solid;padding-left:20px;}\n\
 		button {height:40px;width:200px;margin-bottom:20px;margin-top:20px;font-size:24px;}\n\
+		.logbtn {position:relative;float:right;height:25px;width:50px;margin-top:3px;margin-bottom:0;font-size:10px;text-align:center;}\n\
 		.devlist {position:'+x2changes[1]+';width:190px;}\n\
-		#devicedetail {height:100px;box-shadow: 5px 5px 20px black;}\n\
+		a:link {color:white;text-decoration:none;}\n\
+		a:visited {color:white;}\n\
+		a:hover {color:white;}\n\
+		a:active {color:white;}\n\
+		.version {position:relative;float:left;color:white;font-size:10px;line-height:30px;margin-left:10px;}\n\
+		#devicedetail {height:100px;box-shadow:5px 5px 20px black;}\n\
+		.tblock {position:absolute;height:100%;}\n\
+		.bg {z-index:1;}\n\
 	</style>\n</head>\n<body>\n'
-	hf.write(html_header)
+
+	# no header or css if its embedded
+	if(sysvals.embedded):
+		hf.write('pass True tSus %.3f tRes %.3f tLow %.3f fwvalid %s tSus %.3f tRes %.3f\n' %
+			(data.tSuspended-data.start, data.end-data.tSuspended, data.tLow, data.fwValid, \
+				data.fwSuspend/1000000, data.fwResume/1000000))
+	else:
+		hf.write(html_header)
 
 	# write the test title and general info header
 	if(sysvals.stamp['time'] != ""):
+		hf.write(headline_version)
+		if sysvals.addlogs and sysvals.dmesgfile:
+			hf.write('<button id="showdmesg" class="logbtn">dmesg</button>')
+		if sysvals.addlogs and sysvals.ftracefile:
+			hf.write('<button id="showftrace" class="logbtn">ftrace</button>')
 		hf.write(headline_stamp.format(sysvals.stamp['host'],
 			sysvals.stamp['kernel'], sysvals.stamp['mode'], \
 				sysvals.stamp['time']))
 
 	# write the device timeline
+	hf.write(devtl.html['header'])
 	hf.write(devtl.html['timeline'])
 	hf.write(devtl.html['legend'])
 	hf.write('<div id="devicedetailtitle"></div>\n')
@@ -2410,12 +3366,15 @@
 			width = '%.3f' % ((length*100.0)/tTotal)
 			hf.write(html_phaselet.format(b, left, width, \
 				data.dmesg[b]['color']))
+		if sysvals.suspendmode == 'command':
+			hf.write(html_phaselet.format('cmdexec', '0', '0', \
+				data.dmesg['resume_complete']['color']))
 		hf.write('</div>\n')
 	hf.write('</div>\n')
 
 	# write the ftrace data (callgraph)
 	data = testruns[-1]
-	if(sysvals.usecallgraph):
+	if(sysvals.usecallgraph and not sysvals.embedded):
 		hf.write('<section id="callgraphs" class="callgraph">\n')
 		# write out the ftrace data converted to html
 		html_func_top = '<article id="{0}" class="atop" style="background-color:{1}">\n<input type="checkbox" class="pf" id="f{2}" checked/><label for="f{2}">{3} {4}</label>\n'
@@ -2428,22 +3387,29 @@
 			for devname in data.sortedDevices(p):
 				if('ftrace' not in list[devname]):
 					continue
-				name = devname
-				if(devname in sysvals.altdevname):
-					name = sysvals.altdevname[devname]
 				devid = list[devname]['id']
 				cg = list[devname]['ftrace']
-				flen = '<r>(%.3f ms @ %.3f to %.3f)</r>' % \
-					((cg.end - cg.start)*1000, cg.start*1000, cg.end*1000)
+				clen = (cg.end - cg.start) * 1000
+				if clen < sysvals.mincglen:
+					continue
+				fmt = '<r>(%.3f ms @ '+sysvals.timeformat+' to '+sysvals.timeformat+')</r>'
+				flen = fmt % (clen, cg.start, cg.end)
+				name = devname
+				if(devname in sysvals.devprops):
+					name = sysvals.devprops[devname].altName(devname)
+				if sysvals.suspendmode == 'command':
+					ftitle = name
+				else:
+					ftitle = name+' '+p
 				hf.write(html_func_top.format(devid, data.dmesg[p]['color'], \
-					num, name+' '+p, flen))
+					num, ftitle, flen))
 				num += 1
 				for line in cg.list:
 					if(line.length < 0.000000001):
 						flen = ''
 					else:
-						flen = '<n>(%.3f ms @ %.3f)</n>' % (line.length*1000, \
-							line.time*1000)
+						fmt = '<n>(%.3f ms @ '+sysvals.timeformat+')</n>'
+						flen = fmt % (line.length*1000, line.time)
 					if(line.freturn and line.fcall):
 						hf.write(html_func_leaf.format(line.name, flen))
 					elif(line.freturn):
@@ -2453,9 +3419,40 @@
 						num += 1
 				hf.write(html_func_end)
 		hf.write('\n\n    </section>\n')
-	# write the footer and close
-	addScriptCode(hf, testruns)
-	hf.write('</body>\n</html>\n')
+
+	# add the dmesg log as a hidden div
+	if sysvals.addlogs and sysvals.dmesgfile:
+		hf.write('<div id="dmesglog" style="display:none;">\n')
+		lf = open(sysvals.dmesgfile, 'r')
+		for line in lf:
+			hf.write(line)
+		lf.close()
+		hf.write('</div>\n')
+	# add the ftrace log as a hidden div
+	if sysvals.addlogs and sysvals.ftracefile:
+		hf.write('<div id="ftracelog" style="display:none;">\n')
+		lf = open(sysvals.ftracefile, 'r')
+		for line in lf:
+			hf.write(line)
+		lf.close()
+		hf.write('</div>\n')
+
+	if(not sysvals.embedded):
+		# write the footer and close
+		addScriptCode(hf, testruns)
+		hf.write('</body>\n</html>\n')
+	else:
+		# embedded out will be loaded in a page, skip the js
+		t0 = (testruns[0].start - testruns[-1].tSuspended) * 1000
+		tMax = (testruns[-1].end - testruns[-1].tSuspended) * 1000
+		# add js code in a div entry for later evaluation
+		detail = 'var bounds = [%f,%f];\n' % (t0, tMax)
+		detail += 'var devtable = [\n'
+		for data in testruns:
+			topo = data.deviceTopology()
+			detail += '\t"%s",\n' % (topo)
+		detail += '];\n'
+		hf.write('<div id=customcode style=display:none>\n'+detail+'</div>\n')
 	hf.close()
 	return True
 
@@ -2466,8 +3463,8 @@
 #	 hf: the open html file pointer
 #	 testruns: array of Data objects from parseKernelLog or parseTraceLog
 def addScriptCode(hf, testruns):
-	t0 = (testruns[0].start - testruns[-1].tSuspended) * 1000
-	tMax = (testruns[-1].end - testruns[-1].tSuspended) * 1000
+	t0 = testruns[0].start * 1000
+	tMax = testruns[-1].end * 1000
 	# create an array in javascript memory with the device details
 	detail = '	var devtable = [];\n'
 	for data in testruns:
@@ -2477,8 +3474,43 @@
 	# add the code which will manipulate the data in the browser
 	script_code = \
 	'<script type="text/javascript">\n'+detail+\
+	'	var resolution = -1;\n'\
+	'	function redrawTimescale(t0, tMax, tS) {\n'\
+	'		var rline = \'<div class="t" style="left:0;border-left:1px solid black;border-right:0;"><cR><-R</cR></div>\';\n'\
+	'		var tTotal = tMax - t0;\n'\
+	'		var list = document.getElementsByClassName("tblock");\n'\
+	'		for (var i = 0; i < list.length; i++) {\n'\
+	'			var timescale = list[i].getElementsByClassName("timescale")[0];\n'\
+	'			var m0 = t0 + (tTotal*parseFloat(list[i].style.left)/100);\n'\
+	'			var mTotal = tTotal*parseFloat(list[i].style.width)/100;\n'\
+	'			var mMax = m0 + mTotal;\n'\
+	'			var html = "";\n'\
+	'			var divTotal = Math.floor(mTotal/tS) + 1;\n'\
+	'			if(divTotal > 1000) continue;\n'\
+	'			var divEdge = (mTotal - tS*(divTotal-1))*100/mTotal;\n'\
+	'			var pos = 0.0, val = 0.0;\n'\
+	'			for (var j = 0; j < divTotal; j++) {\n'\
+	'				var htmlline = "";\n'\
+	'				if(list[i].id[5] == "r") {\n'\
+	'					pos = 100 - (((j)*tS*100)/mTotal);\n'\
+	'					val = (j)*tS;\n'\
+	'					htmlline = \'<div class="t" style="right:\'+pos+\'%">\'+val+\'ms</div>\';\n'\
+	'					if(j == 0)\n'\
+	'						htmlline = rline;\n'\
+	'				} else {\n'\
+	'					pos = 100 - (((j)*tS*100)/mTotal) - divEdge;\n'\
+	'					val = (j-divTotal+1)*tS;\n'\
+	'					if(j == divTotal - 1)\n'\
+	'						htmlline = \'<div class="t" style="right:\'+pos+\'%"><cS>S-></cS></div>\';\n'\
+	'					else\n'\
+	'						htmlline = \'<div class="t" style="right:\'+pos+\'%">\'+val+\'ms</div>\';\n'\
+	'				}\n'\
+	'				html += htmlline;\n'\
+	'			}\n'\
+	'			timescale.innerHTML = html;\n'\
+	'		}\n'\
+	'	}\n'\
 	'	function zoomTimeline() {\n'\
-	'		var timescale = document.getElementById("timescale");\n'\
 	'		var dmesg = document.getElementById("dmesg");\n'\
 	'		var zoombox = document.getElementById("dmesgzoombox");\n'\
 	'		var val = parseFloat(dmesg.style.width);\n'\
@@ -2486,7 +3518,7 @@
 	'		var sh = window.outerWidth / 2;\n'\
 	'		if(this.id == "zoomin") {\n'\
 	'			newval = val * 1.2;\n'\
-	'			if(newval > 40000) newval = 40000;\n'\
+	'			if(newval > 910034) newval = 910034;\n'\
 	'			dmesg.style.width = newval+"%";\n'\
 	'			zoombox.scrollLeft = ((zoombox.scrollLeft + sh) * newval / val) - sh;\n'\
 	'		} else if (this.id == "zoomout") {\n'\
@@ -2498,19 +3530,17 @@
 	'			zoombox.scrollLeft = 0;\n'\
 	'			dmesg.style.width = "100%";\n'\
 	'		}\n'\
-	'		var html = "";\n'\
+	'		var tS = [10000, 5000, 2000, 1000, 500, 200, 100, 50, 20, 10, 5, 2, 1];\n'\
 	'		var t0 = bounds[0];\n'\
 	'		var tMax = bounds[1];\n'\
 	'		var tTotal = tMax - t0;\n'\
 	'		var wTotal = tTotal * 100.0 / newval;\n'\
-	'		for(var tS = 1000; (wTotal / tS) < 3; tS /= 10);\n'\
-	'		if(tS < 1) tS = 1;\n'\
-	'		for(var s = ((t0 / tS)|0) * tS; s < tMax; s += tS) {\n'\
-	'			var pos = (tMax - s) * 100.0 / tTotal;\n'\
-	'			var name = (s == 0)?"S/R":(s+"ms");\n'\
-	'			html += "<div class=\\"t\\" style=\\"right:"+pos+"%\\">"+name+"</div>";\n'\
-	'		}\n'\
-	'		timescale.innerHTML = html;\n'\
+	'		var idx = 7*window.innerWidth/1100;\n'\
+	'		for(var i = 0; (i < tS.length)&&((wTotal / tS[i]) < idx); i++);\n'\
+	'		if(i >= tS.length) i = tS.length - 1;\n'\
+	'		if(tS[i] == resolution) return;\n'\
+	'		resolution = tS[i];\n'\
+	'		redrawTimescale(t0, tMax, tS[i]);\n'\
 	'	}\n'\
 	'	function deviceHover() {\n'\
 	'		var name = this.title.slice(0, this.title.indexOf(" ("));\n'\
@@ -2523,12 +3553,13 @@
 	'			cpu = parseInt(name.slice(8));\n'\
 	'		for (var i = 0; i < dev.length; i++) {\n'\
 	'			dname = dev[i].title.slice(0, dev[i].title.indexOf(" ("));\n'\
+	'			var cname = dev[i].className.slice(dev[i].className.indexOf("thread"));\n'\
 	'			if((cpu >= 0 && dname.match("CPU_O[NF]*\\\[*"+cpu+"\\\]")) ||\n'\
 	'				(name == dname))\n'\
 	'			{\n'\
-	'				dev[i].className = "thread hover";\n'\
+	'				dev[i].className = "hover "+cname;\n'\
 	'			} else {\n'\
-	'				dev[i].className = "thread";\n'\
+	'				dev[i].className = cname;\n'\
 	'			}\n'\
 	'		}\n'\
 	'	}\n'\
@@ -2536,7 +3567,7 @@
 	'		var dmesg = document.getElementById("dmesg");\n'\
 	'		var dev = dmesg.getElementsByClassName("thread");\n'\
 	'		for (var i = 0; i < dev.length; i++) {\n'\
-	'			dev[i].className = "thread";\n'\
+	'			dev[i].className = dev[i].className.slice(dev[i].className.indexOf("thread"));\n'\
 	'		}\n'\
 	'	}\n'\
 	'	function deviceTitle(title, total, cpu) {\n'\
@@ -2547,7 +3578,7 @@
 	'			total[2] = (total[2]+total[4])/2;\n'\
 	'		}\n'\
 	'		var devtitle = document.getElementById("devicedetailtitle");\n'\
-	'		var name = title.slice(0, title.indexOf(" "));\n'\
+	'		var name = title.slice(0, title.indexOf(" ("));\n'\
 	'		if(cpu >= 0) name = "CPU"+cpu;\n'\
 	'		var driver = "";\n'\
 	'		var tS = "<t2>(</t2>";\n'\
@@ -2579,6 +3610,8 @@
 	'		var dev = dmesg.getElementsByClassName("thread");\n'\
 	'		var idlist = [];\n'\
 	'		var pdata = [[]];\n'\
+	'		if(document.getElementById("devicedetail1"))\n'\
+	'			pdata = [[], []];\n'\
 	'		var pd = pdata[0];\n'\
 	'		var total = [0.0, 0.0, 0.0];\n'\
 	'		for (var i = 0; i < dev.length; i++) {\n'\
@@ -2634,6 +3667,7 @@
 	'		var cglist = document.getElementById("callgraphs");\n'\
 	'		if(!cglist) return;\n'\
 	'		var cg = cglist.getElementsByClassName("atop");\n'\
+	'		if(cg.length < 10) return;\n'\
 	'		for (var i = 0; i < cg.length; i++) {\n'\
 	'			if(idlist.indexOf(cg[i].id) >= 0) {\n'\
 	'				cg[i].style.display = "block";\n'\
@@ -2658,15 +3692,32 @@
 	'			dt = devtable[1];\n'\
 	'		win.document.write(html+dt);\n'\
 	'	}\n'\
+	'	function logWindow(e) {\n'\
+	'		var name = e.target.id.slice(4);\n'\
+	'		var win = window.open();\n'\
+	'		var log = document.getElementById(name+"log");\n'\
+	'		var title = "<title>"+document.title.split(" ")[0]+" "+name+" log</title>";\n'\
+	'		win.document.write(title+"<pre>"+log.innerHTML+"</pre>");\n'\
+	'		win.document.close();\n'\
+	'	}\n'\
+	'	function onClickPhase(e) {\n'\
+	'	}\n'\
+	'	window.addEventListener("resize", function () {zoomTimeline();});\n'\
 	'	window.addEventListener("load", function () {\n'\
 	'		var dmesg = document.getElementById("dmesg");\n'\
 	'		dmesg.style.width = "100%"\n'\
 	'		document.getElementById("zoomin").onclick = zoomTimeline;\n'\
 	'		document.getElementById("zoomout").onclick = zoomTimeline;\n'\
 	'		document.getElementById("zoomdef").onclick = zoomTimeline;\n'\
-	'		var devlist = document.getElementsByClassName("devlist");\n'\
-	'		for (var i = 0; i < devlist.length; i++)\n'\
-	'			devlist[i].onclick = devListWindow;\n'\
+	'		var list = document.getElementsByClassName("square");\n'\
+	'		for (var i = 0; i < list.length; i++)\n'\
+	'			list[i].onclick = onClickPhase;\n'\
+	'		var list = document.getElementsByClassName("logbtn");\n'\
+	'		for (var i = 0; i < list.length; i++)\n'\
+	'			list[i].onclick = logWindow;\n'\
+	'		list = document.getElementsByClassName("devlist");\n'\
+	'		for (var i = 0; i < list.length; i++)\n'\
+	'			list[i].onclick = devListWindow;\n'\
 	'		var dev = dmesg.getElementsByClassName("thread");\n'\
 	'		for (var i = 0; i < dev.length; i++) {\n'\
 	'			dev[i].onclick = deviceDetail;\n'\
@@ -2685,141 +3736,87 @@
 def executeSuspend():
 	global sysvals
 
-	detectUSB(False)
 	t0 = time.time()*1000
 	tp = sysvals.tpath
+	fwdata = []
+	# mark the start point in the kernel ring buffer just as we start
+	sysvals.initdmesg()
+	# start ftrace
+	if(sysvals.usecallgraph or sysvals.usetraceevents):
+		print('START TRACING')
+		sysvals.fsetVal('1', 'tracing_on')
 	# execute however many s/r runs requested
 	for count in range(1,sysvals.execcount+1):
-		# clear the kernel ring buffer just as we start
-		os.system('dmesg -C')
-		# enable callgraph ftrace only for the second run
-		if(sysvals.usecallgraph and count == 2):
-			# set trace type
-			os.system('echo function_graph > '+tp+'current_tracer')
-			os.system('echo "" > '+tp+'set_ftrace_filter')
-			# set trace format options
-			os.system('echo funcgraph-abstime > '+tp+'trace_options')
-			os.system('echo funcgraph-proc > '+tp+'trace_options')
-			# focus only on device suspend and resume
-			os.system('cat '+tp+'available_filter_functions | '+\
-				'grep dpm_run_callback > '+tp+'set_graph_function')
 		# if this is test2 and there's a delay, start here
 		if(count > 1 and sysvals.x2delay > 0):
 			tN = time.time()*1000
 			while (tN - t0) < sysvals.x2delay:
 				tN = time.time()*1000
 				time.sleep(0.001)
-		# start ftrace
-		if(sysvals.usecallgraph or sysvals.usetraceevents):
-			print('START TRACING')
-			os.system('echo 1 > '+tp+'tracing_on')
 		# initiate suspend
 		if(sysvals.usecallgraph or sysvals.usetraceevents):
-			os.system('echo SUSPEND START > '+tp+'trace_marker')
-		if(sysvals.rtcwake):
-			print('SUSPEND START')
-			print('will autoresume in %d seconds' % sysvals.rtcwaketime)
-			sysvals.rtcWakeAlarm()
+			sysvals.fsetVal('SUSPEND START', 'trace_marker')
+		if sysvals.suspendmode == 'command':
+			print('COMMAND START')
+			if(sysvals.rtcwake):
+				print('will issue an rtcwake in %d seconds' % sysvals.rtcwaketime)
+				sysvals.rtcWakeAlarmOn()
+			os.system(sysvals.testcommand)
 		else:
-			print('SUSPEND START (press a key to resume)')
-		pf = open(sysvals.powerfile, 'w')
-		pf.write(sysvals.suspendmode)
-		# execution will pause here
-		pf.close()
+			if(sysvals.rtcwake):
+				print('SUSPEND START')
+				print('will autoresume in %d seconds' % sysvals.rtcwaketime)
+				sysvals.rtcWakeAlarmOn()
+			else:
+				print('SUSPEND START (press a key to resume)')
+			pf = open(sysvals.powerfile, 'w')
+			pf.write(sysvals.suspendmode)
+			# execution will pause here
+			try:
+				pf.close()
+			except:
+				pass
 		t0 = time.time()*1000
+		if(sysvals.rtcwake):
+			sysvals.rtcWakeAlarmOff()
 		# return from suspend
 		print('RESUME COMPLETE')
 		if(sysvals.usecallgraph or sysvals.usetraceevents):
-			os.system('echo RESUME COMPLETE > '+tp+'trace_marker')
-		# see if there's firmware timing data to be had
-		t = sysvals.postresumetime
-		if(t > 0):
-			print('Waiting %d seconds for POST-RESUME trace events...' % t)
-			time.sleep(t)
-		# stop ftrace
-		if(sysvals.usecallgraph or sysvals.usetraceevents):
-			os.system('echo 0 > '+tp+'tracing_on')
-			print('CAPTURING TRACE')
-			writeDatafileHeader(sysvals.ftracefile)
-			os.system('cat '+tp+'trace >> '+sysvals.ftracefile)
-			os.system('echo "" > '+tp+'trace')
-		# grab a copy of the dmesg output
-		print('CAPTURING DMESG')
-		writeDatafileHeader(sysvals.dmesgfile)
-		os.system('dmesg -c >> '+sysvals.dmesgfile)
+			sysvals.fsetVal('RESUME COMPLETE', 'trace_marker')
+		if(sysvals.suspendmode == 'mem'):
+			fwdata.append(getFPDT(False))
+	# look for post resume events after the last test run
+	t = sysvals.postresumetime
+	if(t > 0):
+		print('Waiting %d seconds for POST-RESUME trace events...' % t)
+		time.sleep(t)
+	# stop ftrace
+	if(sysvals.usecallgraph or sysvals.usetraceevents):
+		sysvals.fsetVal('0', 'tracing_on')
+		print('CAPTURING TRACE')
+		writeDatafileHeader(sysvals.ftracefile, fwdata)
+		os.system('cat '+tp+'trace >> '+sysvals.ftracefile)
+		sysvals.fsetVal('', 'trace')
+		devProps()
+	# grab a copy of the dmesg output
+	print('CAPTURING DMESG')
+	writeDatafileHeader(sysvals.dmesgfile, fwdata)
+	sysvals.getdmesg()
 
-def writeDatafileHeader(filename):
+def writeDatafileHeader(filename, fwdata):
 	global sysvals
 
-	fw = getFPDT(False)
 	prt = sysvals.postresumetime
 	fp = open(filename, 'a')
 	fp.write(sysvals.teststamp+'\n')
-	if(fw):
-		fp.write('# fwsuspend %u fwresume %u\n' % (fw[0], fw[1]))
+	if(sysvals.suspendmode == 'mem'):
+		for fw in fwdata:
+			if(fw):
+				fp.write('# fwsuspend %u fwresume %u\n' % (fw[0], fw[1]))
 	if(prt > 0):
 		fp.write('# post resume time %u\n' % prt)
 	fp.close()
 
-# Function: executeAndroidSuspend
-# Description:
-#	 Execute system suspend through the sysfs interface
-#	 on a remote android device, then transfer the output
-#	 dmesg and ftrace files to the local output directory.
-def executeAndroidSuspend():
-	global sysvals
-
-	# check to see if the display is currently off
-	tp = sysvals.tpath
-	out = os.popen(sysvals.adb+\
-		' shell dumpsys power | grep mScreenOn').read().strip()
-	# if so we need to turn it on so we can issue a new suspend
-	if(out.endswith('false')):
-		print('Waking the device up for the test...')
-		# send the KEYPAD_POWER keyevent to wake it up
-		os.system(sysvals.adb+' shell input keyevent 26')
-		# wait a few seconds so the user can see the device wake up
-		time.sleep(3)
-	# execute however many s/r runs requested
-	for count in range(1,sysvals.execcount+1):
-		# clear the kernel ring buffer just as we start
-		os.system(sysvals.adb+' shell dmesg -c > /dev/null 2>&1')
-		# start ftrace
-		if(sysvals.usetraceevents):
-			print('START TRACING')
-			os.system(sysvals.adb+" shell 'echo 1 > "+tp+"tracing_on'")
-		# initiate suspend
-		for count in range(1,sysvals.execcount+1):
-			if(sysvals.usetraceevents):
-				os.system(sysvals.adb+\
-					" shell 'echo SUSPEND START > "+tp+"trace_marker'")
-			print('SUSPEND START (press a key on the device to resume)')
-			os.system(sysvals.adb+" shell 'echo "+sysvals.suspendmode+\
-				" > "+sysvals.powerfile+"'")
-			# execution will pause here, then adb will exit
-			while(True):
-				check = os.popen(sysvals.adb+\
-					' shell pwd 2>/dev/null').read().strip()
-				if(len(check) > 0):
-					break
-				time.sleep(1)
-			if(sysvals.usetraceevents):
-				os.system(sysvals.adb+" shell 'echo RESUME COMPLETE > "+tp+\
-					"trace_marker'")
-		# return from suspend
-		print('RESUME COMPLETE')
-		# stop ftrace
-		if(sysvals.usetraceevents):
-			os.system(sysvals.adb+" shell 'echo 0 > "+tp+"tracing_on'")
-			print('CAPTURING TRACE')
-			os.system('echo "'+sysvals.teststamp+'" > '+sysvals.ftracefile)
-			os.system(sysvals.adb+' shell cat '+tp+\
-				'trace >> '+sysvals.ftracefile)
-		# grab a copy of the dmesg output
-		print('CAPTURING DMESG')
-		os.system('echo "'+sysvals.teststamp+'" > '+sysvals.dmesgfile)
-		os.system(sysvals.adb+' shell dmesg >> '+sysvals.dmesgfile)
-
 # Function: setUSBDevicesAuto
 # Description:
 #	 Set the autosuspend control parameter of all USB devices to auto
@@ -2829,7 +3826,7 @@
 def setUSBDevicesAuto():
 	global sysvals
 
-	rootCheck()
+	rootCheck(True)
 	for dirname, dirnames, filenames in os.walk('/sys/devices'):
 		if(re.match('.*/usb[0-9]*.*', dirname) and
 			'idVendor' in filenames and 'idProduct' in filenames):
@@ -2874,9 +3871,7 @@
 # Description:
 #	 Detect all the USB hosts and devices currently connected and add
 #	 a list of USB device names to sysvals for better timeline readability
-# Arguments:
-#	 output: True to output the info to stdout, False otherwise
-def detectUSB(output):
+def detectUSB():
 	global sysvals
 
 	field = {'idVendor':'', 'idProduct':'', 'product':'', 'speed':''}
@@ -2887,18 +3882,18 @@
 			'runtime_suspended_time':'',
 			'active_duration':'',
 			'connected_duration':''}
-	if(output):
-		print('LEGEND')
-		print('---------------------------------------------------------------------------------------------')
-		print('  A = async/sync PM queue Y/N                       D = autosuspend delay (seconds)')
-		print('  S = autosuspend Y/N                         rACTIVE = runtime active (min/sec)')
-		print('  P = persist across suspend Y/N              rSUSPEN = runtime suspend (min/sec)')
-		print('  E = runtime suspend enabled/forbidden Y/N    ACTIVE = active duration (min/sec)')
-		print('  R = runtime status active/suspended Y/N     CONNECT = connected duration (min/sec)')
-		print('  U = runtime usage count')
-		print('---------------------------------------------------------------------------------------------')
-		print('  NAME       ID      DESCRIPTION         SPEED A S P E R U D rACTIVE rSUSPEN  ACTIVE CONNECT')
-		print('---------------------------------------------------------------------------------------------')
+
+	print('LEGEND')
+	print('---------------------------------------------------------------------------------------------')
+	print('  A = async/sync PM queue Y/N                       D = autosuspend delay (seconds)')
+	print('  S = autosuspend Y/N                         rACTIVE = runtime active (min/sec)')
+	print('  P = persist across suspend Y/N              rSUSPEN = runtime suspend (min/sec)')
+	print('  E = runtime suspend enabled/forbidden Y/N    ACTIVE = active duration (min/sec)')
+	print('  R = runtime status active/suspended Y/N     CONNECT = connected duration (min/sec)')
+	print('  U = runtime usage count')
+	print('---------------------------------------------------------------------------------------------')
+	print('  NAME       ID      DESCRIPTION         SPEED A S P E R U D rACTIVE rSUSPEN  ACTIVE CONNECT')
+	print('---------------------------------------------------------------------------------------------')
 
 	for dirname, dirnames, filenames in os.walk('/sys/devices'):
 		if(re.match('.*/usb[0-9]*.*', dirname) and
@@ -2907,35 +3902,149 @@
 				field[i] = os.popen('cat %s/%s 2>/dev/null' % \
 					(dirname, i)).read().replace('\n', '')
 			name = dirname.split('/')[-1]
-			if(len(field['product']) > 0):
-				sysvals.altdevname[name] = \
-					'%s [%s]' % (field['product'], name)
+			for i in power:
+				power[i] = os.popen('cat %s/power/%s 2>/dev/null' % \
+					(dirname, i)).read().replace('\n', '')
+			if(re.match('usb[0-9]*', name)):
+				first = '%-8s' % name
 			else:
-				sysvals.altdevname[name] = \
-					'%s:%s [%s]' % (field['idVendor'], \
-						field['idProduct'], name)
-			if(output):
-				for i in power:
-					power[i] = os.popen('cat %s/power/%s 2>/dev/null' % \
-						(dirname, i)).read().replace('\n', '')
-				if(re.match('usb[0-9]*', name)):
-					first = '%-8s' % name
-				else:
-					first = '%8s' % name
-				print('%s [%s:%s] %-20s %-4s %1s %1s %1s %1s %1s %1s %1s %s %s %s %s' % \
-					(first, field['idVendor'], field['idProduct'], \
-					field['product'][0:20], field['speed'], \
-					yesno(power['async']), \
-					yesno(power['control']), \
-					yesno(power['persist']), \
-					yesno(power['runtime_enabled']), \
-					yesno(power['runtime_status']), \
-					power['runtime_usage'], \
-					power['autosuspend'], \
-					ms2nice(power['runtime_active_time']), \
-					ms2nice(power['runtime_suspended_time']), \
-					ms2nice(power['active_duration']), \
-					ms2nice(power['connected_duration'])))
+				first = '%8s' % name
+			print('%s [%s:%s] %-20s %-4s %1s %1s %1s %1s %1s %1s %1s %s %s %s %s' % \
+				(first, field['idVendor'], field['idProduct'], \
+				field['product'][0:20], field['speed'], \
+				yesno(power['async']), \
+				yesno(power['control']), \
+				yesno(power['persist']), \
+				yesno(power['runtime_enabled']), \
+				yesno(power['runtime_status']), \
+				power['runtime_usage'], \
+				power['autosuspend'], \
+				ms2nice(power['runtime_active_time']), \
+				ms2nice(power['runtime_suspended_time']), \
+				ms2nice(power['active_duration']), \
+				ms2nice(power['connected_duration'])))
+
+# Function: devProps
+# Description:
+#	 Retrieve a list of properties for all devices in the trace log
+def devProps(data=0):
+	global sysvals
+	props = dict()
+
+	if data:
+		idx = data.index(': ') + 2
+		if idx >= len(data):
+			return
+		devlist = data[idx:].split(';')
+		for dev in devlist:
+			f = dev.split(',')
+			if len(f) < 3:
+				continue
+			dev = f[0]
+			props[dev] = DevProps()
+			props[dev].altname = f[1]
+			if int(f[2]):
+				props[dev].async = True
+			else:
+				props[dev].async = False
+			sysvals.devprops = props
+		if sysvals.suspendmode == 'command' and 'testcommandstring' in props:
+			sysvals.testcommand = props['testcommandstring'].altname
+		return
+
+	if(os.path.exists(sysvals.ftracefile) == False):
+		doError('%s does not exist' % sysvals.ftracefile, False)
+
+	# first get the list of devices we need properties for
+	msghead = 'Additional data added by AnalyzeSuspend'
+	alreadystamped = False
+	tp = TestProps()
+	tf = open(sysvals.ftracefile, 'r')
+	for line in tf:
+		if msghead in line:
+			alreadystamped = True
+			continue
+		# determine the trace data type (required for further parsing)
+		m = re.match(sysvals.tracertypefmt, line)
+		if(m):
+			tp.setTracerType(m.group('t'))
+			continue
+		# parse only valid lines, if this is not one move on
+		m = re.match(tp.ftrace_line_fmt, line)
+		if(not m or 'device_pm_callback_start' not in line):
+			continue
+		m = re.match('.*: (?P<drv>.*) (?P<d>.*), parent: *(?P<p>.*), .*', m.group('msg'));
+		if(not m):
+			continue
+		drv, dev, par = m.group('drv'), m.group('d'), m.group('p')
+		if dev not in props:
+			props[dev] = DevProps()
+	tf.close()
+
+	if not alreadystamped and sysvals.suspendmode == 'command':
+		out = '#\n# '+msghead+'\n# Device Properties: '
+		out += 'testcommandstring,%s,0;' % (sysvals.testcommand)
+		with open(sysvals.ftracefile, 'a') as fp:
+			fp.write(out+'\n')
+		sysvals.devprops = props
+		return
+
+	# now get the syspath for each of our target devices
+	for dirname, dirnames, filenames in os.walk('/sys/devices'):
+		if(re.match('.*/power', dirname) and 'async' in filenames):
+			dev = dirname.split('/')[-2]
+			if dev in props and (not props[dev].syspath or len(dirname) < len(props[dev].syspath)):
+				props[dev].syspath = dirname[:-6]
+
+	# now fill in the properties for our target devices
+	for dev in props:
+		dirname = props[dev].syspath
+		if not dirname or not os.path.exists(dirname):
+			continue
+		with open(dirname+'/power/async') as fp:
+			text = fp.read()
+			props[dev].async = False
+			if 'enabled' in text:
+				props[dev].async = True
+		fields = os.listdir(dirname)
+		if 'product' in fields:
+			with open(dirname+'/product') as fp:
+				props[dev].altname = fp.read()
+		elif 'name' in fields:
+			with open(dirname+'/name') as fp:
+				props[dev].altname = fp.read()
+		elif 'model' in fields:
+			with open(dirname+'/model') as fp:
+				props[dev].altname = fp.read()
+		elif 'description' in fields:
+			with open(dirname+'/description') as fp:
+				props[dev].altname = fp.read()
+		elif 'id' in fields:
+			with open(dirname+'/id') as fp:
+				props[dev].altname = fp.read()
+		elif 'idVendor' in fields and 'idProduct' in fields:
+			idv, idp = '', ''
+			with open(dirname+'/idVendor') as fp:
+				idv = fp.read().strip()
+			with open(dirname+'/idProduct') as fp:
+				idp = fp.read().strip()
+			props[dev].altname = '%s:%s' % (idv, idp)
+
+		if props[dev].altname:
+			out = props[dev].altname.strip().replace('\n', ' ')
+			out = out.replace(',', ' ')
+			out = out.replace(';', ' ')
+			props[dev].altname = out
+
+	# and now write the data to the ftrace file
+	if not alreadystamped:
+		out = '#\n# '+msghead+'\n# Device Properties: '
+		for dev in sorted(props):
+			out += props[dev].out(dev)
+		with open(sysvals.ftracefile, 'a') as fp:
+			fp.write(out+'\n')
+
+	sysvals.devprops = props
 
 # Function: getModes
 # Description:
@@ -2945,15 +4054,10 @@
 def getModes():
 	global sysvals
 	modes = ''
-	if(not sysvals.android):
-		if(os.path.exists(sysvals.powerfile)):
-			fp = open(sysvals.powerfile, 'r')
-			modes = string.split(fp.read())
-			fp.close()
-	else:
-		line = os.popen(sysvals.adb+' shell cat '+\
-			sysvals.powerfile).read().strip()
-		modes = string.split(line)
+	if(os.path.exists(sysvals.powerfile)):
+		fp = open(sysvals.powerfile, 'r')
+		modes = string.split(fp.read())
+		fp.close()
 	return modes
 
 # Function: getFPDT
@@ -2971,22 +4075,22 @@
 	prectype[0] = 'Basic S3 Resume Performance Record'
 	prectype[1] = 'Basic S3 Suspend Performance Record'
 
-	rootCheck()
+	rootCheck(True)
 	if(not os.path.exists(sysvals.fpdtpath)):
 		if(output):
-			doError('file doesnt exist: %s' % sysvals.fpdtpath, False)
+			doError('file does not exist: %s' % sysvals.fpdtpath, False)
 		return False
 	if(not os.access(sysvals.fpdtpath, os.R_OK)):
 		if(output):
-			doError('file isnt readable: %s' % sysvals.fpdtpath, False)
+			doError('file is not readable: %s' % sysvals.fpdtpath, False)
 		return False
 	if(not os.path.exists(sysvals.mempath)):
 		if(output):
-			doError('file doesnt exist: %s' % sysvals.mempath, False)
+			doError('file does not exist: %s' % sysvals.mempath, False)
 		return False
 	if(not os.access(sysvals.mempath, os.R_OK)):
 		if(output):
-			doError('file isnt readable: %s' % sysvals.mempath, False)
+			doError('file is not readable: %s' % sysvals.mempath, False)
 		return False
 
 	fp = open(sysvals.fpdtpath, 'rb')
@@ -3027,15 +4131,19 @@
 	while(i < len(records)):
 		header = struct.unpack('HBB', records[i:i+4])
 		if(header[0] not in rectype):
+			i += header[1]
 			continue
 		if(header[1] != 16):
+			i += header[1]
 			continue
 		addr = struct.unpack('Q', records[i+8:i+16])[0]
 		try:
 			fp.seek(addr)
 			first = fp.read(8)
 		except:
-			doError('Bad address 0x%x in %s' % (addr, sysvals.mempath), False)
+			if(output):
+				print('Bad address 0x%x in %s' % (addr, sysvals.mempath))
+			return [0, 0]
 		rechead = struct.unpack('4sI', first)
 		recdata = fp.read(rechead[1]-8)
 		if(rechead[0] == 'FBPT'):
@@ -3090,89 +4198,60 @@
 #	 print the results to the terminal
 # Output:
 #	 True if the test will work, False if not
-def statusCheck():
+def statusCheck(probecheck=False):
 	global sysvals
 	status = True
 
-	if(sysvals.android):
-		print('Checking the android system ...')
-	else:
-		print('Checking this system (%s)...' % platform.node())
-
-	# check if adb is connected to a device
-	if(sysvals.android):
-		res = 'NO'
-		out = os.popen(sysvals.adb+' get-state').read().strip()
-		if(out == 'device'):
-			res = 'YES'
-		print('    is android device connected: %s' % res)
-		if(res != 'YES'):
-			print('    Please connect the device before using this tool')
-			return False
+	print('Checking this system (%s)...' % platform.node())
 
 	# check we have root access
-	res = 'NO (No features of this tool will work!)'
-	if(sysvals.android):
-		out = os.popen(sysvals.adb+' shell id').read().strip()
-		if('root' in out):
-			res = 'YES'
-	else:
-		if(os.environ['USER'] == 'root'):
-			res = 'YES'
+	res = sysvals.colorText('NO (No features of this tool will work!)')
+	if(rootCheck(False)):
+		res = 'YES'
 	print('    have root access: %s' % res)
 	if(res != 'YES'):
-		if(sysvals.android):
-			print('    Try running "adb root" to restart the daemon as root')
-		else:
-			print('    Try running this script with sudo')
+		print('    Try running this script with sudo')
 		return False
 
 	# check sysfs is mounted
-	res = 'NO (No features of this tool will work!)'
-	if(sysvals.android):
-		out = os.popen(sysvals.adb+' shell ls '+\
-			sysvals.powerfile).read().strip()
-		if(out == sysvals.powerfile):
-			res = 'YES'
-	else:
-		if(os.path.exists(sysvals.powerfile)):
-			res = 'YES'
+	res = sysvals.colorText('NO (No features of this tool will work!)')
+	if(os.path.exists(sysvals.powerfile)):
+		res = 'YES'
 	print('    is sysfs mounted: %s' % res)
 	if(res != 'YES'):
 		return False
 
 	# check target mode is a valid mode
-	res = 'NO'
-	modes = getModes()
-	if(sysvals.suspendmode in modes):
-		res = 'YES'
-	else:
-		status = False
-	print('    is "%s" a valid power mode: %s' % (sysvals.suspendmode, res))
-	if(res == 'NO'):
-		print('      valid power modes are: %s' % modes)
-		print('      please choose one with -m')
-
-	# check if the tool can unlock the device
-	if(sysvals.android):
-		res = 'YES'
-		out1 = os.popen(sysvals.adb+\
-			' shell dumpsys power | grep mScreenOn').read().strip()
-		out2 = os.popen(sysvals.adb+\
-			' shell input').read().strip()
-		if(not out1.startswith('mScreenOn') or not out2.startswith('usage')):
-			res = 'NO (wake the android device up before running the test)'
-		print('    can I unlock the screen: %s' % res)
+	if sysvals.suspendmode != 'command':
+		res = sysvals.colorText('NO')
+		modes = getModes()
+		if(sysvals.suspendmode in modes):
+			res = 'YES'
+		else:
+			status = False
+		print('    is "%s" a valid power mode: %s' % (sysvals.suspendmode, res))
+		if(res == 'NO'):
+			print('      valid power modes are: %s' % modes)
+			print('      please choose one with -m')
 
 	# check if ftrace is available
-	res = 'NO'
-	ftgood = verifyFtrace()
+	res = sysvals.colorText('NO')
+	ftgood = sysvals.verifyFtrace()
 	if(ftgood):
 		res = 'YES'
 	elif(sysvals.usecallgraph):
 		status = False
 	print('    is ftrace supported: %s' % res)
 
+	# check if kprobes are available
+	res = sysvals.colorText('NO')
+	sysvals.usekprobes = sysvals.verifyKprobes()
+	if(sysvals.usekprobes):
+		res = 'YES'
+	else:
+		sysvals.usedevsrc = False
+	print('    are kprobes supported: %s' % res)
+
 	# what data source are we using
 	res = 'DMESG'
 	if(ftgood):
@@ -3180,14 +4259,8 @@
 		sysvals.usetraceevents = False
 		for e in sysvals.traceevents:
 			check = False
-			if(sysvals.android):
-				out = os.popen(sysvals.adb+' shell ls -d '+\
-					sysvals.epath+e).read().strip()
-				if(out == sysvals.epath+e):
-					check = True
-			else:
-				if(os.path.exists(sysvals.epath+e)):
-					check = True
+			if(os.path.exists(sysvals.epath+e)):
+				check = True
 			if(not check):
 				sysvals.usetraceeventsonly = False
 			if(e == 'suspend_resume' and check):
@@ -3199,13 +4272,48 @@
 	print('    timeline data source: %s' % res)
 
 	# check if rtcwake
-	res = 'NO'
+	res = sysvals.colorText('NO')
 	if(sysvals.rtcpath != ''):
 		res = 'YES'
 	elif(sysvals.rtcwake):
 		status = False
 	print('    is rtcwake supported: %s' % res)
 
+	if not probecheck:
+		return status
+
+	if (sysvals.usecallgraph and len(sysvals.debugfuncs) > 0) or len(sysvals.kprobes) > 0:
+		sysvals.initFtrace(True)
+
+	# verify callgraph debugfuncs
+	if sysvals.usecallgraph and len(sysvals.debugfuncs) > 0:
+		print('    verifying these ftrace callgraph functions work:')
+		sysvals.setFtraceFilterFunctions(sysvals.debugfuncs)
+		fp = open(sysvals.tpath+'set_graph_function', 'r')
+		flist = fp.read().split('\n')
+		fp.close()
+		for func in sysvals.debugfuncs:
+			res = sysvals.colorText('NO')
+			if func in flist:
+				res = 'YES'
+			else:
+				for i in flist:
+					if ' [' in i and func == i.split(' ')[0]:
+						res = 'YES'
+						break
+			print('         %s: %s' % (func, res))
+
+	# verify kprobes
+	if len(sysvals.kprobes) > 0:
+		print('    verifying these kprobes work:')
+		for name in sorted(sysvals.kprobes):
+			if name in sysvals.tracefuncs:
+				continue
+			res = sysvals.colorText('NO')
+			if sysvals.testKprobe(sysvals.kprobes[name]):
+				res = 'YES'
+			print('         %s: %s' % (name, res))
+
 	return status
 
 # Function: doError
@@ -3226,7 +4334,7 @@
 # Arguments:
 #	 msg: the warning message to print
 #	 file: If not empty, a filename to request be sent to the owner for debug
-def doWarning(msg, file):
+def doWarning(msg, file=''):
 	print('/* %s */') % msg
 	if(file):
 		print('/* For a fix, please send this'+\
@@ -3235,18 +4343,25 @@
 # Function: rootCheck
 # Description:
 #	 quick check to see if we have root access
-def rootCheck():
-	if(os.environ['USER'] != 'root'):
-		doError('This script must be run as root', False)
+def rootCheck(fatal):
+	global sysvals
+	if(os.access(sysvals.powerfile, os.W_OK)):
+		return True
+	if fatal:
+		doError('This command must be run as root', False)
+	return False
 
 # Function: getArgInt
 # Description:
 #	 pull out an integer argument from the command line with checks
-def getArgInt(name, args, min, max):
-	try:
-		arg = args.next()
-	except:
-		doError(name+': no argument supplied', True)
+def getArgInt(name, args, min, max, main=True):
+	if main:
+		try:
+			arg = args.next()
+		except:
+			doError(name+': no argument supplied', True)
+	else:
+		arg = args
 	try:
 		val = int(arg)
 	except:
@@ -3255,6 +4370,25 @@
 		doError(name+': value should be between %d and %d' % (min, max), True)
 	return val
 
+# Function: getArgFloat
+# Description:
+#	 pull out a float argument from the command line with checks
+def getArgFloat(name, args, min, max, main=True):
+	if main:
+		try:
+			arg = args.next()
+		except:
+			doError(name+': no argument supplied', True)
+	else:
+		arg = args
+	try:
+		val = float(arg)
+	except:
+		doError(name+': non-numerical value given', True)
+	if(val < min or val > max):
+		doError(name+': value should be between %f and %f' % (min, max), True)
+	return val
+
 # Function: rerunTest
 # Description:
 #	 generate an output from an existing set of ftrace/dmesg logs
@@ -3282,15 +4416,12 @@
 # Function: runTest
 # Description:
 #	 execute a suspend/resume, gather the logs, and generate the output
-def runTest(subdir):
+def runTest(subdir, testpath=''):
 	global sysvals
 
 	# prepare for the test
-	if(not sysvals.android):
-		initFtrace()
-	else:
-		initFtraceAndroid()
-	sysvals.initTestOutput(subdir)
+	sysvals.initFtrace()
+	sysvals.initTestOutput(subdir, testpath)
 
 	vprint('Output files:\n    %s' % sysvals.dmesgfile)
 	if(sysvals.usecallgraph or
@@ -3300,10 +4431,8 @@
 	vprint('    %s' % sysvals.htmlfile)
 
 	# execute the test
-	if(not sysvals.android):
-		executeSuspend()
-	else:
-		executeAndroidSuspend()
+	executeSuspend()
+	sysvals.cleanupFtrace()
 
 	# analyze the data and create the html output
 	print('PROCESSING DATA')
@@ -3367,6 +4496,153 @@
 
 	createHTMLSummarySimple(testruns, subdir+'/summary.html')
 
+# Function: checkArgBool
+# Description:
+#	 check if a boolean string value is true or false
+def checkArgBool(value):
+	yes = ['1', 'true', 'yes', 'on']
+	if value.lower() in yes:
+		return True
+	return False
+
+# Function: configFromFile
+# Description:
+#	 Configure the script via the info in a config file
+def configFromFile(file):
+	global sysvals
+	Config = ConfigParser.ConfigParser()
+
+	ignorekprobes = False
+	Config.read(file)
+	sections = Config.sections()
+	if 'Settings' in sections:
+		for opt in Config.options('Settings'):
+			value = Config.get('Settings', opt).lower()
+			if(opt.lower() == 'verbose'):
+				sysvals.verbose = checkArgBool(value)
+			elif(opt.lower() == 'addlogs'):
+				sysvals.addlogs = checkArgBool(value)
+			elif(opt.lower() == 'dev'):
+				sysvals.usedevsrc = checkArgBool(value)
+			elif(opt.lower() == 'ignorekprobes'):
+				ignorekprobes = checkArgBool(value)
+			elif(opt.lower() == 'x2'):
+				if checkArgBool(value):
+					sysvals.execcount = 2
+			elif(opt.lower() == 'callgraph'):
+				sysvals.usecallgraph = checkArgBool(value)
+			elif(opt.lower() == 'callgraphfunc'):
+				sysvals.debugfuncs = []
+				if value:
+					value = value.split(',')
+				for i in value:
+					sysvals.debugfuncs.append(i.strip())
+			elif(opt.lower() == 'expandcg'):
+				sysvals.cgexp = checkArgBool(value)
+			elif(opt.lower() == 'srgap'):
+				if checkArgBool(value):
+					sysvals.srgap = 5
+			elif(opt.lower() == 'mode'):
+				sysvals.suspendmode = value
+			elif(opt.lower() == 'command'):
+				sysvals.testcommand = value
+			elif(opt.lower() == 'x2delay'):
+				sysvals.x2delay = getArgInt('-x2delay', value, 0, 60000, False)
+			elif(opt.lower() == 'postres'):
+				sysvals.postresumetime = getArgInt('-postres', value, 0, 3600, False)
+			elif(opt.lower() == 'rtcwake'):
+				sysvals.rtcwake = True
+				sysvals.rtcwaketime = getArgInt('-rtcwake', value, 0, 3600, False)
+			elif(opt.lower() == 'timeprec'):
+				sysvals.setPrecision(getArgInt('-timeprec', value, 0, 6, False))
+			elif(opt.lower() == 'mindev'):
+				sysvals.mindevlen = getArgFloat('-mindev', value, 0.0, 10000.0, False)
+			elif(opt.lower() == 'mincg'):
+				sysvals.mincglen = getArgFloat('-mincg', value, 0.0, 10000.0, False)
+			elif(opt.lower() == 'kprobecolor'):
+				try:
+					val = int(value, 16)
+					sysvals.kprobecolor = '#'+value
+				except:
+					sysvals.kprobecolor = value
+			elif(opt.lower() == 'synccolor'):
+				try:
+					val = int(value, 16)
+					sysvals.synccolor = '#'+value
+				except:
+					sysvals.synccolor = value
+			elif(opt.lower() == 'output-dir'):
+				args = dict()
+				n = datetime.now()
+				args['date'] = n.strftime('%y%m%d')
+				args['time'] = n.strftime('%H%M%S')
+				args['hostname'] = sysvals.hostname
+				sysvals.outdir = value.format(**args)
+
+	if sysvals.suspendmode == 'command' and not sysvals.testcommand:
+		doError('No command supplied for mode "command"', False)
+	if sysvals.usedevsrc and sysvals.usecallgraph:
+		doError('dev and callgraph cannot both be true', False)
+	if sysvals.usecallgraph and sysvals.execcount > 1:
+		doError('-x2 is not compatible with -f', False)
+
+	if ignorekprobes:
+		return
+
+	kprobes = dict()
+	archkprobe = 'Kprobe_'+platform.machine()
+	if archkprobe in sections:
+		for name in Config.options(archkprobe):
+			kprobes[name] = Config.get(archkprobe, name)
+	if 'Kprobe' in sections:
+		for name in Config.options('Kprobe'):
+			kprobes[name] = Config.get('Kprobe', name)
+
+	for name in kprobes:
+		function = name
+		format = name
+		color = ''
+		args = dict()
+		data = kprobes[name].split()
+		i = 0
+		for val in data:
+			# bracketted strings are special formatting, read them separately
+			if val[0] == '[' and val[-1] == ']':
+				for prop in val[1:-1].split(','):
+					p = prop.split('=')
+					if p[0] == 'color':
+						try:
+							color = int(p[1], 16)
+							color = '#'+p[1]
+						except:
+							color = p[1]
+				continue
+			# first real arg should be the format string
+			if i == 0:
+				format = val
+			# all other args are actual function args
+			else:
+				d = val.split('=')
+				args[d[0]] = d[1]
+			i += 1
+		if not function or not format:
+			doError('Invalid kprobe: %s' % name, False)
+		for arg in re.findall('{(?P<n>[a-z,A-Z,0-9]*)}', format):
+			if arg not in args:
+				doError('Kprobe "%s" is missing argument "%s"' % (name, arg), False)
+		if name in sysvals.kprobes:
+			doError('Duplicate kprobe found "%s"' % (name), False)
+		vprint('Adding KPROBE: %s %s %s %s' % (name, function, format, args))
+		sysvals.kprobes[name] = {
+			'name': name,
+			'func': function,
+			'format': format,
+			'args': args,
+			'mask': re.sub('{(?P<n>[a-z,A-Z,0-9]*)}', '.*', format)
+		}
+		if color:
+			sysvals.kprobes[name]['color'] = color
+
 # Function: printHelp
 # Description:
 #	 print out the help text
@@ -3375,7 +4651,7 @@
 	modes = getModes()
 
 	print('')
-	print('AnalyzeSuspend v%.1f' % sysvals.version)
+	print('AnalyzeSuspend v%s' % sysvals.version)
 	print('Usage: sudo analyze_suspend.py <options>')
 	print('')
 	print('Description:')
@@ -3396,27 +4672,38 @@
 	print('  [general]')
 	print('    -h          Print this help text')
 	print('    -v          Print the current tool version')
+	print('    -config file Pull arguments and config options from a file')
 	print('    -verbose    Print extra information during execution and analysis')
 	print('    -status     Test to see if the system is enabled to run this tool')
 	print('    -modes      List available suspend modes')
 	print('    -m mode     Mode to initiate for suspend %s (default: %s)') % (modes, sysvals.suspendmode)
-	print('    -rtcwake t  Use rtcwake to autoresume after <t> seconds (default: disabled)')
+	print('    -o subdir   Override the output subdirectory')
 	print('  [advanced]')
+	print('    -rtcwake t  Use rtcwake to autoresume after <t> seconds (default: disabled)')
+	print('    -addlogs    Add the dmesg and ftrace logs to the html output')
+	print('    -multi n d  Execute <n> consecutive tests at <d> seconds intervals. The outputs will')
+	print('                be created in a new subdirectory with a summary page.')
+	print('    -srgap      Add a visible gap in the timeline between sus/res (default: disabled)')
+	print('    -cmd {s}    Instead of suspend/resume, run a command, e.g. "sync -d"')
+	print('    -mindev ms  Discard all device blocks shorter than ms milliseconds (e.g. 0.001 for us)')
+	print('    -mincg  ms  Discard all callgraphs shorter than ms milliseconds (e.g. 0.001 for us)')
+	print('    -timeprec N Number of significant digits in timestamps (0:S, [3:ms], 6:us)')
+	print('  [debug]')
 	print('    -f          Use ftrace to create device callgraphs (default: disabled)')
-	print('    -filter "d1 d2 ..." Filter out all but this list of dev names')
+	print('    -expandcg   pre-expand the callgraph data in the html output (default: disabled)')
+	print('    -flist      Print the list of functions currently being captured in ftrace')
+	print('    -flistall   Print all functions capable of being captured in ftrace')
+	print('    -fadd file  Add functions to be graphed in the timeline from a list in a text file')
+	print('    -filter "d1 d2 ..." Filter out all but this list of device names')
+	print('    -dev        Display common low level functions in the timeline')
+	print('  [post-resume task analysis]')
 	print('    -x2         Run two suspend/resumes back to back (default: disabled)')
 	print('    -x2delay t  Minimum millisecond delay <t> between the two test runs (default: 0 ms)')
 	print('    -postres t  Time after resume completion to wait for post-resume events (default: 0 S)')
-	print('    -multi n d  Execute <n> consecutive tests at <d> seconds intervals. The outputs will')
-	print('                be created in a new subdirectory with a summary page.')
 	print('  [utilities]')
 	print('    -fpdt       Print out the contents of the ACPI Firmware Performance Data Table')
 	print('    -usbtopo    Print out the current USB topology with power info')
 	print('    -usbauto    Enable autosuspend for all connected USB devices')
-	print('  [android testing]')
-	print('    -adb binary Use the given adb binary to run the test on an android device.')
-	print('                The device should already be connected and with root access.')
-	print('                Commands will be executed on the device using "adb shell"')
 	print('  [re-analyze data from previous runs]')
 	print('    -ftrace ftracefile  Create HTML output using ftrace input')
 	print('    -dmesg dmesgfile    Create HTML output using dmesg (not needed for kernel >= 3.15)')
@@ -3430,6 +4717,7 @@
 	cmd = ''
 	cmdarg = ''
 	multitest = {'run': False, 'count': 0, 'delay': 0}
+	simplecmds = ['-modes', '-fpdt', '-flist', '-flistall', '-usbtopo', '-usbauto', '-status']
 	# loop through the command line arguments
 	args = iter(sys.argv[1:])
 	for arg in args:
@@ -3438,58 +4726,85 @@
 				val = args.next()
 			except:
 				doError('No mode supplied', True)
+			if val == 'command' and not sysvals.testcommand:
+				doError('No command supplied for mode "command"', True)
 			sysvals.suspendmode = val
-		elif(arg == '-adb'):
-			try:
-				val = args.next()
-			except:
-				doError('No adb binary supplied', True)
-			if(not os.path.exists(val)):
-				doError('file doesnt exist: %s' % val, False)
-			if(not os.access(val, os.X_OK)):
-				doError('file isnt executable: %s' % val, False)
-			try:
-				check = os.popen(val+' version').read().strip()
-			except:
-				doError('adb version failed to execute', False)
-			if(not re.match('Android Debug Bridge .*', check)):
-				doError('adb version failed to execute', False)
-			sysvals.adb = val
-			sysvals.android = True
+		elif(arg in simplecmds):
+			cmd = arg[1:]
+		elif(arg == '-h'):
+			printHelp()
+			sys.exit()
+		elif(arg == '-v'):
+			print("Version %s" % sysvals.version)
+			sys.exit()
 		elif(arg == '-x2'):
-			if(sysvals.postresumetime > 0):
-				doError('-x2 is not compatible with -postres', False)
 			sysvals.execcount = 2
+			if(sysvals.usecallgraph):
+				doError('-x2 is not compatible with -f', False)
 		elif(arg == '-x2delay'):
 			sysvals.x2delay = getArgInt('-x2delay', args, 0, 60000)
 		elif(arg == '-postres'):
-			if(sysvals.execcount != 1):
-				doError('-x2 is not compatible with -postres', False)
 			sysvals.postresumetime = getArgInt('-postres', args, 0, 3600)
 		elif(arg == '-f'):
 			sysvals.usecallgraph = True
-		elif(arg == '-modes'):
-			cmd = 'modes'
-		elif(arg == '-fpdt'):
-			cmd = 'fpdt'
-		elif(arg == '-usbtopo'):
-			cmd = 'usbtopo'
-		elif(arg == '-usbauto'):
-			cmd = 'usbauto'
-		elif(arg == '-status'):
-			cmd = 'status'
+			if(sysvals.execcount > 1):
+				doError('-x2 is not compatible with -f', False)
+			if(sysvals.usedevsrc):
+				doError('-dev is not compatible with -f', False)
+		elif(arg == '-addlogs'):
+			sysvals.addlogs = True
 		elif(arg == '-verbose'):
 			sysvals.verbose = True
-		elif(arg == '-v'):
-			print("Version %.1f" % sysvals.version)
-			sys.exit()
+		elif(arg == '-dev'):
+			sysvals.usedevsrc = True
+			if(sysvals.usecallgraph):
+				doError('-dev is not compatible with -f', False)
 		elif(arg == '-rtcwake'):
 			sysvals.rtcwake = True
 			sysvals.rtcwaketime = getArgInt('-rtcwake', args, 0, 3600)
+		elif(arg == '-timeprec'):
+			sysvals.setPrecision(getArgInt('-timeprec', args, 0, 6))
+		elif(arg == '-mindev'):
+			sysvals.mindevlen = getArgFloat('-mindev', args, 0.0, 10000.0)
+		elif(arg == '-mincg'):
+			sysvals.mincglen = getArgFloat('-mincg', args, 0.0, 10000.0)
+		elif(arg == '-cmd'):
+			try:
+				val = args.next()
+			except:
+				doError('No command string supplied', True)
+			sysvals.testcommand = val
+			sysvals.suspendmode = 'command'
+		elif(arg == '-expandcg'):
+			sysvals.cgexp = True
+		elif(arg == '-srgap'):
+			sysvals.srgap = 5
 		elif(arg == '-multi'):
 			multitest['run'] = True
 			multitest['count'] = getArgInt('-multi n (exec count)', args, 2, 1000000)
 			multitest['delay'] = getArgInt('-multi d (delay between tests)', args, 0, 3600)
+		elif(arg == '-o'):
+			try:
+				val = args.next()
+			except:
+				doError('No subdirectory name supplied', True)
+			sysvals.outdir = val
+		elif(arg == '-config'):
+			try:
+				val = args.next()
+			except:
+				doError('No text file supplied', True)
+			if(os.path.exists(val) == False):
+				doError('%s does not exist' % val, False)
+			configFromFile(val)
+		elif(arg == '-fadd'):
+			try:
+				val = args.next()
+			except:
+				doError('No text file supplied', True)
+			if(os.path.exists(val) == False):
+				doError('%s does not exist' % val, False)
+			sysvals.addFtraceFilterFunctions(val)
 		elif(arg == '-dmesg'):
 			try:
 				val = args.next()
@@ -3498,17 +4813,16 @@
 			sysvals.notestrun = True
 			sysvals.dmesgfile = val
 			if(os.path.exists(sysvals.dmesgfile) == False):
-				doError('%s doesnt exist' % sysvals.dmesgfile, False)
+				doError('%s does not exist' % sysvals.dmesgfile, False)
 		elif(arg == '-ftrace'):
 			try:
 				val = args.next()
 			except:
 				doError('No ftrace file supplied', True)
 			sysvals.notestrun = True
-			sysvals.usecallgraph = True
 			sysvals.ftracefile = val
 			if(os.path.exists(sysvals.ftracefile) == False):
-				doError('%s doesnt exist' % sysvals.ftracefile, False)
+				doError('%s does not exist' % sysvals.ftracefile, False)
 		elif(arg == '-summary'):
 			try:
 				val = args.next()
@@ -3518,35 +4832,35 @@
 			cmdarg = val
 			sysvals.notestrun = True
 			if(os.path.isdir(val) == False):
-				doError('%s isnt accesible' % val, False)
+				doError('%s is not accesible' % val, False)
 		elif(arg == '-filter'):
 			try:
 				val = args.next()
 			except:
 				doError('No devnames supplied', True)
 			sysvals.setDeviceFilter(val)
-		elif(arg == '-h'):
-			printHelp()
-			sys.exit()
 		else:
 			doError('Invalid argument: '+arg, True)
 
+	# callgraph size cannot exceed device size
+	if sysvals.mincglen < sysvals.mindevlen:
+		sysvals.mincglen = sysvals.mindevlen
+
 	# just run a utility command and exit
 	if(cmd != ''):
 		if(cmd == 'status'):
-			statusCheck()
+			statusCheck(True)
 		elif(cmd == 'fpdt'):
-			if(sysvals.android):
-				doError('cannot read FPDT on android device', False)
 			getFPDT(True)
 		elif(cmd == 'usbtopo'):
-			if(sysvals.android):
-				doError('cannot read USB topology '+\
-					'on an android device', False)
-			detectUSB(True)
+			detectUSB()
 		elif(cmd == 'modes'):
 			modes = getModes()
 			print modes
+		elif(cmd == 'flist'):
+			sysvals.getFtraceFilterFunctions(True)
+		elif(cmd == 'flistall'):
+			sysvals.getFtraceFilterFunctions(False)
 		elif(cmd == 'usbauto'):
 			setUSBDevicesAuto()
 		elif(cmd == 'summary'):
@@ -3554,15 +4868,6 @@
 			runSummary(cmdarg, True)
 		sys.exit()
 
-	# run test on android device
-	if(sysvals.android):
-		if(sysvals.usecallgraph):
-			doError('ftrace (-f) is not yet supported '+\
-				'in the android kernel', False)
-		if(sysvals.notestrun):
-			doError('cannot analyze test files on the '+\
-				'android device', False)
-
 	# if instructed, re-analyze existing data files
 	if(sysvals.notestrun):
 		rerunTest()
@@ -3574,18 +4879,20 @@
 		sys.exit()
 
 	if multitest['run']:
-		# run multiple tests in a separte subdirectory
+		# run multiple tests in a separate subdirectory
 		s = 'x%d' % multitest['count']
-		subdir = datetime.now().strftime('suspend-'+s+'-%m%d%y-%H%M%S')
-		os.mkdir(subdir)
+		if not sysvals.outdir:
+			sysvals.outdir = datetime.now().strftime('suspend-'+s+'-%m%d%y-%H%M%S')
+		if not os.path.isdir(sysvals.outdir):
+			os.mkdir(sysvals.outdir)
 		for i in range(multitest['count']):
 			if(i != 0):
 				print('Waiting %d seconds...' % (multitest['delay']))
 				time.sleep(multitest['delay'])
 			print('TEST (%d/%d) START' % (i+1, multitest['count']))
-			runTest(subdir)
+			runTest(sysvals.outdir)
 			print('TEST (%d/%d) COMPLETE' % (i+1, multitest['count']))
-		runSummary(subdir, False)
+		runSummary(sysvals.outdir, False)
 	else:
 		# run the test in the current directory
-		runTest(".")
+		runTest('.', sysvals.outdir)