usb-storage: reorganize target-specific code
Now that usb-storage has a target_alloc() routine, this patch (as1508)
moves some existing target-specific code out of the slave_alloc()
routine to where it really belongs.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index dc68cc9..a324a5d 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -78,8 +78,6 @@
static int slave_alloc (struct scsi_device *sdev)
{
- struct us_data *us = host_to_us(sdev->host);
-
/*
* Set the INQUIRY transfer length to 36. We don't use any of
* the extra data and many devices choke if asked for more or
@@ -104,18 +102,6 @@
*/
blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
- /*
- * The UFI spec treates the Peripheral Qualifier bits in an
- * INQUIRY result as reserved and requires devices to set them
- * to 0. However the SCSI spec requires these bits to be set
- * to 3 to indicate when a LUN is not present.
- *
- * Let the scanning code know if this target merely sets
- * Peripheral Device Type to 0x1f to indicate no LUN.
- */
- if (us->subclass == USB_SC_UFI)
- sdev->sdev_target->pdt_1f_for_no_lun = 1;
-
return 0;
}
@@ -278,6 +264,8 @@
static int target_alloc(struct scsi_target *starget)
{
+ struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent));
+
/*
* Some USB drives don't support REPORT LUNS, even though they
* report a SCSI revision level above 2. Tell the SCSI layer
@@ -285,6 +273,19 @@
* scan instead.
*/
starget->no_report_luns = 1;
+
+ /*
+ * The UFI spec treats the Peripheral Qualifier bits in an
+ * INQUIRY result as reserved and requires devices to set them
+ * to 0. However the SCSI spec requires these bits to be set
+ * to 3 to indicate when a LUN is not present.
+ *
+ * Let the scanning code know if this target merely sets
+ * Peripheral Device Type to 0x1f to indicate no LUN.
+ */
+ if (us->subclass == USB_SC_UFI)
+ starget->pdt_1f_for_no_lun = 1;
+
return 0;
}
