ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 767aae8..bd12ddd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1,58 +1,57 @@
config ARM
bool
default y
- select ARCH_HAVE_CUSTOM_GPIO_H
- select HAVE_AOUT
- select HAVE_DMA_API_DEBUG
- select HAVE_IDE if PCI || ISA || PCMCIA
- select HAVE_DMA_ATTRS
- select HAVE_DMA_CONTIGUOUS if MMU
- select HAVE_MEMBLOCK
- select RTC_LIB
- select SYS_SUPPORTS_APM_EMULATION
- select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
+ select ARCH_BINFMT_ELF_RANDOMIZE_PIE
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
- select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
+ select ARCH_HAVE_CUSTOM_GPIO_H
+ select ARCH_WANT_IPC_PARSE_VERSION
+ select CPU_PM if (SUSPEND || CPU_IDLE)
+ select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
+ select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
+ select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select GENERIC_IRQ_PROBE
+ select GENERIC_IRQ_SHOW
+ select GENERIC_KERNEL_THREAD
+ select GENERIC_PCI_IOMAP
+ select GENERIC_SMP_IDLE_THREAD
+ select GENERIC_STRNCPY_FROM_USER
+ select GENERIC_STRNLEN_USER
+ select HARDIRQS_SW_RESEND
+ select HAVE_AOUT
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
- select HAVE_SYSCALL_TRACEPOINTS
+ select HAVE_BPF_JIT
+ select HAVE_C_RECORDMCOUNT
+ select HAVE_DEBUG_KMEMLEAK
+ select HAVE_DMA_API_DEBUG
+ select HAVE_DMA_ATTRS
+ select HAVE_DMA_CONTIGUOUS if MMU
+ select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+ select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
+ select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
+ select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
+ select HAVE_GENERIC_DMA_COHERENT
+ select HAVE_GENERIC_HARDIRQS
+ select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
+ select HAVE_IDE if PCI || ISA || PCMCIA
+ select HAVE_IRQ_WORK
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
+ select HAVE_KERNEL_XZ
select HAVE_KPROBES if !XIP_KERNEL
select HAVE_KRETPROBES if (HAVE_KPROBES)
- select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
- select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
- select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
- select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
- select ARCH_BINFMT_ELF_RANDOMIZE_PIE
- select HAVE_GENERIC_DMA_COHERENT
- select HAVE_DEBUG_KMEMLEAK
- select HAVE_KERNEL_GZIP
- select HAVE_KERNEL_LZO
- select HAVE_KERNEL_LZMA
- select HAVE_KERNEL_XZ
- select HAVE_IRQ_WORK
+ select HAVE_MEMBLOCK
+ select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_PERF_EVENTS
- select PERF_USE_VMALLOC
select HAVE_REGS_AND_STACK_ACCESS_API
- select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
- select HAVE_C_RECORDMCOUNT
- select HAVE_GENERIC_HARDIRQS
- select HARDIRQS_SW_RESEND
- select GENERIC_IRQ_PROBE
- select GENERIC_IRQ_SHOW
+ select HAVE_SYSCALL_TRACEPOINTS
select HAVE_UID16
- select ARCH_WANT_IPC_PARSE_VERSION
- select HARDIRQS_SW_RESEND
- select CPU_PM if (SUSPEND || CPU_IDLE)
- select GENERIC_PCI_IOMAP
- select HAVE_BPF_JIT
- select GENERIC_SMP_IDLE_THREAD
select KTIME_SCALAR
- select GENERIC_CLOCKEVENTS_BROADCAST if SMP
- select GENERIC_STRNCPY_FROM_USER
- select GENERIC_STRNLEN_USER
- select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
- select GENERIC_KERNEL_THREAD
+ select PERF_USE_VMALLOC
+ select RTC_LIB
+ select SYS_SUPPORTS_APM_EMULATION
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
@@ -68,9 +67,9 @@
bool
config ARM_DMA_USE_IOMMU
- select NEED_SG_DMA_LENGTH
- select ARM_HAS_SG_CHAIN
bool
+ select ARM_HAS_SG_CHAIN
+ select NEED_SG_DMA_LENGTH
config HAVE_PWM
bool
@@ -262,69 +261,69 @@
config ARCH_MULTIPLATFORM
bool "Allow multiple platforms to be selected"
+ depends on MMU
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
select COMMON_CLK
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
- depends on MMU
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
- select ARM_AMBA
select ARCH_HAS_CPUFREQ
+ select ARM_AMBA
select COMMON_CLK
select COMMON_CLK_VERSATILE
+ select GENERIC_CLOCKEVENTS
select HAVE_TCM
select ICST
- select GENERIC_CLOCKEVENTS
+ select MULTI_IRQ_HANDLER
+ select NEED_MACH_MEMORY_H
select PLAT_VERSATILE
select PLAT_VERSATILE_FPGA_IRQ
- select NEED_MACH_MEMORY_H
select SPARSE_IRQ
- select MULTI_IRQ_HANDLER
help
Support for ARM's Integrator platform.
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
+ select ARM_TIMER_SP804
select COMMON_CLK
select COMMON_CLK_VERSATILE
- select ICST
select GENERIC_CLOCKEVENTS
- select ARCH_WANT_OPTIONAL_GPIOLIB
+ select GPIO_PL061 if GPIOLIB
+ select ICST
+ select NEED_MACH_MEMORY_H
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
- select ARM_TIMER_SP804
- select GPIO_PL061 if GPIOLIB
- select NEED_MACH_MEMORY_H
help
This enables support for ARM Ltd RealView boards.
config ARCH_VERSATILE
bool "ARM Ltd. Versatile family"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
+ select ARM_TIMER_SP804
select ARM_VIC
select CLKDEV_LOOKUP
+ select GENERIC_CLOCKEVENTS
select HAVE_MACH_CLKDEV
select ICST
- select GENERIC_CLOCKEVENTS
- select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
- select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
+ select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_FPGA_IRQ
- select ARM_TIMER_SP804
help
This enables support for ARM Ltd Versatile board.
config ARCH_AT91
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
select CLKDEV_LOOKUP
+ select HAVE_CLK
select IRQ_DOMAIN
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H if PCCARD
@@ -351,19 +350,19 @@
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
- select CPU_ARM720T
select ARCH_USES_GETTIMEOFFSET
- select COMMON_CLK
select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CPU_ARM720T
select NEED_MACH_MEMORY_H
help
Support for Cirrus Logic 711x/721x/731x based boards.
config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family"
+ select ARM_GIC
select CPU_V6K
select GENERIC_CLOCKEVENTS
- select ARM_GIC
select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
@@ -372,20 +371,20 @@
config ARCH_GEMINI
bool "Cortina Systems Gemini"
- select CPU_FA526
select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
+ select CPU_FA526
help
Support for the Cortina Systems Gemini family SoCs
config ARCH_SIRF
bool "CSR SiRF"
- select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_CLOCKEVENTS
select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0
+ select NO_IOPORT
select PINCTRL
select PINCTRL_SIRF
select USE_OF
@@ -394,12 +393,12 @@
config ARCH_EBSA110
bool "EBSA-110"
+ select ARCH_USES_GETTIMEOFFSET
select CPU_SA110
select ISA
- select NO_IOPORT
- select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
+ select NO_IOPORT
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
@@ -408,13 +407,13 @@
config ARCH_EP93XX
bool "EP93xx-based"
- select CPU_ARM920T
+ select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
select ARM_AMBA
select ARM_VIC
select CLKDEV_LOOKUP
- select ARCH_REQUIRE_GPIOLIB
- select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_USES_GETTIMEOFFSET
+ select CPU_ARM920T
select NEED_MACH_MEMORY_H
help
This enables support for the Cirrus EP93xx series of CPUs.
@@ -433,10 +432,10 @@
config ARCH_MXC
bool "Freescale MXC/iMX-based"
- select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
@@ -446,11 +445,11 @@
config ARCH_MXS
bool "Freescale MXS-based"
- select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
select HAVE_CLK_PREPARE
select MULTI_IRQ_HANDLER
select PINCTRL
@@ -461,43 +460,43 @@
config ARCH_NETX
bool "Hilscher NetX based"
+ select ARM_VIC
select CLKSRC_MMIO
select CPU_ARM926T
- select ARM_VIC
select GENERIC_CLOCKEVENTS
help
This enables support for systems based on the Hilscher NetX Soc
config ARCH_H720X
bool "Hynix HMS720x-based"
+ select ARCH_USES_GETTIMEOFFSET
select CPU_ARM720T
select ISA_DMA_API
- select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Hynix HMS720x
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
- select CPU_XSC3
- select PLAT_IOP
- select PCI
select ARCH_SUPPORTS_MSI
- select VMSPLIT_1G
+ select CPU_XSC3
select NEED_MACH_MEMORY_H
select NEED_RET_TO_USER
+ select PCI
+ select PLAT_IOP
+ select VMSPLIT_1G
help
Support for Intel's IOP13XX (XScale) family of processors.
config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
+ select ARCH_REQUIRE_GPIOLIB
select CPU_XSCALE
select NEED_MACH_GPIO_H
select NEED_RET_TO_USER
- select PLAT_IOP
select PCI
- select ARCH_REQUIRE_GPIOLIB
+ select PLAT_IOP
help
Support for Intel's 80219 and IOP32X (XScale) family of
processors.
@@ -505,12 +504,12 @@
config ARCH_IOP33X
bool "IOP33x-based"
depends on MMU
+ select ARCH_REQUIRE_GPIOLIB
select CPU_XSCALE
select NEED_MACH_GPIO_H
select NEED_RET_TO_USER
- select PLAT_IOP
select PCI
- select ARCH_REQUIRE_GPIOLIB
+ select PLAT_IOP
help
Support for Intel's IOP33X (XScale) family of processors.
@@ -518,20 +517,20 @@
bool "IXP4xx-based"
depends on MMU
select ARCH_HAS_DMA_SET_COHERENT_MASK
+ select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select CPU_XSCALE
- select ARCH_REQUIRE_GPIOLIB
+ select DMABOUNCE if PCI
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
select NEED_MACH_IO_H
- select DMABOUNCE if PCI
help
Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_DOVE
bool "Marvell Dove"
- select CPU_V7
select ARCH_REQUIRE_GPIOLIB
+ select CPU_V7
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
select PLAT_ORION_LEGACY
@@ -541,10 +540,10 @@
config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
- select CPU_FEROCEON
- select PCI
select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
+ select PCI
select PLAT_ORION_LEGACY
help
Support for the following Marvell Kirkwood series SoCs:
@@ -552,25 +551,25 @@
config ARCH_LPC32XX
bool "NXP LPC32XX"
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CPU_ARM926T
- select ARCH_REQUIRE_GPIOLIB
- select HAVE_IDE
- select ARM_AMBA
- select USB_ARCH_HAS_OHCI
- select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
- select USE_OF
+ select HAVE_IDE
select HAVE_PWM
+ select USB_ARCH_HAS_OHCI
+ select USE_OF
help
Support for the NXP LPC32XX family of processors
config ARCH_MV78XX0
bool "Marvell MV78xx0"
- select CPU_FEROCEON
- select PCI
select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
+ select PCI
select PLAT_ORION_LEGACY
help
Support for the following Marvell MV78xx0 series SoCs:
@@ -579,10 +578,10 @@
config ARCH_ORION5X
bool "Marvell Orion"
depends on MMU
- select CPU_FEROCEON
- select PCI
select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
+ select PCI
select PLAT_ORION_LEGACY
help
Support for the following Marvell Orion 5x series SoCs:
@@ -594,33 +593,33 @@
depends on MMU
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GPIO_PXA
select IRQ_DOMAIN
+ select NEED_MACH_GPIO_H
select PLAT_PXA
select SPARSE_IRQ
- select GENERIC_ALLOCATOR
- select NEED_MACH_GPIO_H
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
- select CPU_ARM922T
select ARCH_REQUIRE_GPIOLIB
- select NEED_MACH_MEMORY_H
select CLKSRC_MMIO
+ select CPU_ARM922T
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_MEMORY_H
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
config ARCH_W90X900
bool "Nuvoton W90X900 CPU"
- select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select CPU_ARM926T
select GENERIC_CLOCKEVENTS
help
Support for Nuvoton (Winbond logic dept.) ARM9 processor,
@@ -633,16 +632,16 @@
config ARCH_TEGRA
bool "NVIDIA Tegra"
+ select ARCH_HAS_CPUFREQ
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_CLK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
- select ARCH_HAS_CPUFREQ
select USE_OF
- select COMMON_CLK
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
@@ -650,29 +649,29 @@
config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
- select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
+ select ARCH_MTD_XIP
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_CPU_SUSPEND if PM
+ select AUTO_ZRELADDR
select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select GPIO_PXA
+ select HAVE_IDE
+ select MULTI_IRQ_HANDLER
+ select NEED_MACH_GPIO_H
select PLAT_PXA
select SPARSE_IRQ
- select AUTO_ZRELADDR
- select MULTI_IRQ_HANDLER
- select ARM_CPU_SUSPEND if PM
- select HAVE_IDE
- select NEED_MACH_GPIO_H
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
config ARCH_MSM
bool "Qualcomm MSM"
- select HAVE_CLK
- select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
help
Support for Qualcomm MSM/QSD based systems. This runs on the
apps processor of the MSM/QSD and depends on a shared memory
@@ -682,50 +681,50 @@
config ARCH_SHMOBILE
bool "Renesas SH-Mobile / R-Mobile"
- select HAVE_CLK
select CLKDEV_LOOKUP
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
select HAVE_MACH_CLKDEV
select HAVE_SMP
- select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_CACHE_L2X0
- select NO_IOPORT
- select SPARSE_IRQ
select MULTI_IRQ_HANDLER
- select PM_GENERIC_DOMAINS if PM
select NEED_MACH_MEMORY_H
+ select NO_IOPORT
+ select PM_GENERIC_DOMAINS if PM
+ select SPARSE_IRQ
help
Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
config ARCH_RPC
bool "RiscPC"
select ARCH_ACORN
- select FIQ
select ARCH_MAY_HAVE_PC_FDC
- select HAVE_PATA_PLATFORM
- select ISA_DMA_API
- select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE
select ARCH_USES_GETTIMEOFFSET
+ select FIQ
select HAVE_IDE
+ select HAVE_PATA_PLATFORM
+ select ISA_DMA_API
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
+ select NO_IOPORT
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
config ARCH_SA1100
bool "SA1100-based"
- select CLKSRC_MMIO
- select CPU_SA1100
- select ISA
- select ARCH_SPARSEMEM_ENABLE
- select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
- select CPU_FREQ
- select GENERIC_CLOCKEVENTS
- select CLKDEV_LOOKUP
+ select ARCH_MTD_XIP
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_SPARSEMEM_ENABLE
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select CPU_FREQ
+ select CPU_SA1100
+ select GENERIC_CLOCKEVENTS
select HAVE_IDE
+ select ISA
select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
select SPARSE_IRQ
@@ -734,14 +733,14 @@
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
- select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
- select HAVE_CLK
- select CLKDEV_LOOKUP
select ARCH_USES_GETTIMEOFFSET
+ select CLKDEV_LOOKUP
+ select GENERIC_GPIO
+ select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
help
@@ -752,38 +751,38 @@
config ARCH_S3C64XX
bool "Samsung S3C64XX"
- select PLAT_SAMSUNG
- select CPU_V6
- select ARM_VIC
- select HAVE_CLK
- select HAVE_TCM
- select CLKDEV_LOOKUP
- select NO_IOPORT
- select ARCH_USES_GETTIMEOFFSET
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
- select SAMSUNG_CLKSRC
- select SAMSUNG_IRQ_VIC_TIMER
- select S3C_GPIO_TRACK
- select S3C_DEV_NAND
- select USB_ARCH_HAS_OHCI
- select SAMSUNG_GPIOLIB_4BIT
+ select ARCH_USES_GETTIMEOFFSET
+ select ARM_VIC
+ select CLKDEV_LOOKUP
+ select CPU_V6
+ select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_TCM
select NEED_MACH_GPIO_H
+ select NO_IOPORT
+ select PLAT_SAMSUNG
+ select S3C_DEV_NAND
+ select S3C_GPIO_TRACK
+ select SAMSUNG_CLKSRC
+ select SAMSUNG_GPIOLIB_4BIT
+ select SAMSUNG_IRQ_VIC_TIMER
+ select USB_ARCH_HAS_OHCI
help
Samsung S3C64XX series based systems
config ARCH_S5P64X0
bool "Samsung S5P6440 S5P6450"
- select CPU_V6
- select GENERIC_GPIO
- select HAVE_CLK
select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select CPU_V6
select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
help
@@ -792,32 +791,32 @@
config ARCH_S5PC100
bool "Samsung S5PC100"
- select GENERIC_GPIO
- select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
select CLKDEV_LOOKUP
select CPU_V7
- select ARCH_USES_GETTIMEOFFSET
+ select GENERIC_GPIO
+ select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
help
Samsung S5PC100 series based systems
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
- select CPU_V7
- select ARCH_SPARSEMEM_ENABLE
+ select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
- select GENERIC_GPIO
- select HAVE_CLK
+ select ARCH_SPARSEMEM_ENABLE
select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select ARCH_HAS_CPUFREQ
+ select CPU_V7
select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
@@ -825,17 +824,17 @@
config ARCH_EXYNOS
bool "SAMSUNG EXYNOS"
- select CPU_V7
- select ARCH_SPARSEMEM_ENABLE
+ select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_SPARSEMEM_ENABLE
+ select CLKDEV_LOOKUP
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_CLK
- select CLKDEV_LOOKUP
- select ARCH_HAS_CPUFREQ
- select GENERIC_CLOCKEVENTS
- select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
@@ -843,13 +842,13 @@
config ARCH_SHARK
bool "Shark"
+ select ARCH_USES_GETTIMEOFFSET
select CPU_SA110
select ISA
select ISA_DMA
- select ZONE_DMA
- select PCI
- select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
+ select PCI
+ select ZONE_DMA
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -857,17 +856,17 @@
config ARCH_U300
bool "ST-Ericsson U300 Series"
depends on MMU
- select CLKSRC_MMIO
- select CPU_ARM926T
- select HAVE_TCM
+ select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT
select ARM_VIC
- select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select COMMON_CLK
+ select CPU_ARM926T
+ select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
+ select HAVE_TCM
select SPARSE_IRQ
help
Support for ST-Ericsson U300 series mobile platforms.
@@ -875,12 +874,12 @@
config ARCH_U8500
bool "ST-Ericsson U8500 Series"
depends on MMU
- select CPU_V7
- select ARM_AMBA
- select GENERIC_CLOCKEVENTS
- select CLKDEV_LOOKUP
- select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select CLKDEV_LOOKUP
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
@@ -888,52 +887,52 @@
config ARCH_NOMADIK
bool "STMicroelectronics Nomadik"
+ select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
- select CPU_ARM926T
select COMMON_CLK
+ select CPU_ARM926T
select GENERIC_CLOCKEVENTS
+ select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_STN8815
- select MIGHT_HAVE_CACHE_L2X0
- select ARCH_REQUIRE_GPIOLIB
help
Support for the Nomadik platform by ST-Ericsson
config ARCH_DAVINCI
bool "TI DaVinci"
- select GENERIC_CLOCKEVENTS
+ select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
- select ZONE_DMA
- select HAVE_IDE
select CLKDEV_LOOKUP
select GENERIC_ALLOCATOR
+ select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select ARCH_HAS_HOLES_MEMORYMODEL
+ select HAVE_IDE
select NEED_MACH_GPIO_H
+ select ZONE_DMA
help
Support for TI's DaVinci platform.
config ARCH_OMAP
bool "TI OMAP"
depends on MMU
- select HAVE_CLK
- select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
- select ARCH_HAS_HOLES_MEMORYMODEL
+ select HAVE_CLK
select NEED_MACH_GPIO_H
help
Support for TI's OMAP platform (OMAP1/2/3/4).
config PLAT_SPEAR
bool "ST SPEAr"
- select ARM_AMBA
select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
select CLKDEV_LOOKUP
- select COMMON_CLK
select CLKSRC_MMIO
+ select COMMON_CLK
select GENERIC_CLOCKEVENTS
select HAVE_CLK
help
@@ -941,25 +940,25 @@
config ARCH_VT8500
bool "VIA/WonderMedia 85xx"
- select CPU_ARM926T
- select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
- select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
- select USE_OF
- select COMMON_CLK
- select HAVE_CLK
select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CPU_ARM926T
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_CLK
+ select USE_OF
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform"
+ select ARM_AMBA
+ select ARM_GIC
+ select CLKDEV_LOOKUP
select CPU_V7
select GENERIC_CLOCKEVENTS
- select CLKDEV_LOOKUP
- select ARM_GIC
- select ARM_AMBA
select ICST
select MIGHT_HAVE_CACHE_L2X0
select USE_OF
@@ -974,33 +973,33 @@
config ARCH_MULTI_V4
bool "ARMv4 based platforms (FA526, StrongARM)"
- select ARCH_MULTI_V4_V5
depends on !ARCH_MULTI_V6_V7
+ select ARCH_MULTI_V4_V5
config ARCH_MULTI_V4T
bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
- select ARCH_MULTI_V4_V5
depends on !ARCH_MULTI_V6_V7
+ select ARCH_MULTI_V4_V5
config ARCH_MULTI_V5
bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
- select ARCH_MULTI_V4_V5
depends on !ARCH_MULTI_V6_V7
+ select ARCH_MULTI_V4_V5
config ARCH_MULTI_V4_V5
bool
config ARCH_MULTI_V6
bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
- select CPU_V6
select ARCH_MULTI_V6_V7
+ select CPU_V6
config ARCH_MULTI_V7
bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
- select CPU_V7
- select ARCH_VEXPRESS
default y
select ARCH_MULTI_V6_V7
+ select ARCH_VEXPRESS
+ select CPU_V7
config ARCH_MULTI_V6_V7
bool
@@ -1137,9 +1136,9 @@
config PLAT_ORION
bool
select CLKSRC_MMIO
+ select COMMON_CLK
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
- select COMMON_CLK
config PLAT_ORION_LEGACY
bool
@@ -1497,8 +1496,8 @@
depends on GENERIC_CLOCKEVENTS
depends on HAVE_SMP
depends on MMU
- select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
+ select USE_GENERIC_SMP_HELPERS
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -1857,9 +1856,9 @@
config USE_OF
bool "Flattened Device Tree support"
+ select IRQ_DOMAIN
select OF
select OF_EARLY_FLATTREE
- select IRQ_DOMAIN
help
Include support for flattened device tree machine descriptions.
@@ -2141,8 +2140,8 @@
bool
depends on CPU_FREQ && ARCH_PXA && PXA25x
default y
- select CPU_FREQ_TABLE
select CPU_FREQ_DEFAULT_GOV_USERSPACE
+ select CPU_FREQ_TABLE
config CPU_FREQ_S3C
bool
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 283fa1d..45ceeb0 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,15 +1,15 @@
config ARM_GIC
+ bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
- bool
config GIC_NON_BANKED
bool
config ARM_VIC
+ bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
- bool
config ARM_VIC_NR
int
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index c8050b1..b142071 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -19,8 +19,8 @@
config SOC_AT91SAM9
bool
- select GENERIC_CLOCKEVENTS
select CPU_ARM926T
+ select GENERIC_CLOCKEVENTS
menu "Atmel AT91 System-on-Chip"
@@ -28,66 +28,66 @@
config SOC_AT91SAM9
bool
+ select AT91_SAM9_SMC
+ select AT91_SAM9_TIME
select CPU_ARM926T
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
- select AT91_SAM9_TIME
- select AT91_SAM9_SMC
config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
config SOC_AT91SAM9260
bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_NET_MACB
+ select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
or AT91SAM9G20 SoC.
config SOC_AT91SAM9261
bool "AT91SAM9261 or AT91SAM9G10"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
+ select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
config SOC_AT91SAM9263
bool "AT91SAM9263"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select HAVE_NET_MACB
+ select SOC_AT91SAM9
config SOC_AT91SAM9RL
bool "AT91SAM9RL"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
+ select SOC_AT91SAM9
config SOC_AT91SAM9G45
bool "AT91SAM9G45 or AT91SAM9M10 families"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select HAVE_NET_MACB
+ select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
config SOC_AT91SAM9X5
bool "AT91SAM9x5 family"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select HAVE_NET_MACB
+ select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
This means that your SAM9 name finishes with a '5' (except if it is
@@ -97,9 +97,9 @@
config SOC_AT91SAM9N12
bool "AT91SAM9N12 family"
- select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
+ select SOC_AT91SAM9
help
Select this if you are using Atmel's AT91SAM9N12 SoC.
@@ -144,9 +144,9 @@
config ARCH_AT91X40
bool "AT91x40"
depends on !MMU
+ select ARCH_USES_GETTIMEOFFSET
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
- select ARCH_USES_GETTIMEOFFSET
endchoice
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index e613536..263242d 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -23,9 +23,9 @@
config ARCH_EDB7211
bool "EDB7211"
- select ISA
- select ARCH_SPARSEMEM_ENABLE
select ARCH_SELECT_MEMORY_MODEL
+ select ARCH_SPARSEMEM_ENABLE
+ select ISA
help
Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
evaluation board.
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 026b4b2..f8eecb9 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -4,12 +4,12 @@
bool
config CP_INTC
- select IRQ_DOMAIN
bool
+ select IRQ_DOMAIN
config ARCH_DAVINCI_DMx
- select CPU_ARM926T
bool
+ select CPU_ARM926T
menu "TI DaVinci Implementations"
@@ -32,19 +32,19 @@
config ARCH_DAVINCI_DA830
bool "DA830/OMAP-L137/AM17x based system"
- select CP_INTC
select ARCH_DAVINCI_DA8XX
select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
+ select CP_INTC
config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138/AM18x based system"
- select CP_INTC
select ARCH_DAVINCI_DA8XX
select ARCH_HAS_CPUFREQ
+ select CP_INTC
config ARCH_DAVINCI_DA8XX
- select CPU_ARM926T
bool
+ select CPU_ARM926T
config ARCH_DAVINCI_DM365
bool "DaVinci 365 based system"
@@ -52,9 +52,9 @@
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_TNETV107X
+ bool "TNETV107X based system"
select CPU_V6
select CP_INTC
- bool "TNETV107X based system"
comment "DaVinci Board Type"
@@ -103,9 +103,9 @@
bool "TI DM6467 EVM"
default ARCH_DAVINCI_DM646x
depends on ARCH_DAVINCI_DM646x
- select MACH_DAVINCI_DM6467TEVM
select EEPROM_AT24
select I2C
+ select MACH_DAVINCI_DM6467TEVM
help
Configure this option to specify the whether the board used
for development is a DM6467 EVM
@@ -127,8 +127,8 @@
bool "TI DA830/OMAP-L137/AM17x Reference Platform"
default ARCH_DAVINCI_DA830
depends on ARCH_DAVINCI_DA830
- select GPIO_PCF857X
select EEPROM_AT24
+ select GPIO_PCF857X
select I2C
help
Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 4372075..da55107 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -31,11 +31,11 @@
bool "SAMSUNG EXYNOS4210"
default y
depends on ARCH_EXYNOS4
- select SAMSUNG_DMADEV
select ARM_CPU_SUSPEND if PM
+ select PM_GENERIC_DOMAINS
select S5P_PM if PM
select S5P_SLEEP if PM
- select PM_GENERIC_DOMAINS
+ select SAMSUNG_DMADEV
help
Enable EXYNOS4210 CPU support
@@ -43,9 +43,9 @@
bool "SAMSUNG EXYNOS4212"
default y
depends on ARCH_EXYNOS4
- select SAMSUNG_DMADEV
select S5P_PM if PM
select S5P_SLEEP if PM
+ select SAMSUNG_DMADEV
help
Enable EXYNOS4212 SoC support
@@ -61,9 +61,9 @@
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
- select SAMSUNG_DMADEV
select S5P_PM if PM
select S5P_SLEEP if PM
+ select SAMSUNG_DMADEV
help
Enable EXYNOS5250 SoC support
@@ -189,71 +189,71 @@
config MACH_SMDKV310
bool "SMDKV310"
select CPU_EXYNOS4210
- select S5P_DEV_FIMD0
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S3C_DEV_I2C1
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_G2D
- select S5P_DEV_I2C_HDMIPHY
- select S5P_DEV_JPEG
- select S5P_DEV_MFC
- select S5P_DEV_TV
- select S5P_DEV_USB_EHCI
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_USB_HSOTG
- select SAMSUNG_DEV_BACKLIGHT
- select EXYNOS_DEV_DRM
- select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_AHCI
- select SAMSUNG_DEV_KEYPAD
- select EXYNOS_DEV_DMA
- select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
+ select EXYNOS_DEV_DMA
+ select EXYNOS_DEV_DRM
+ select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_RTC
+ select S3C_DEV_USB_HSOTG
+ select S3C_DEV_WDT
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
+ select S5P_DEV_FIMD0
+ select S5P_DEV_G2D
+ select S5P_DEV_I2C_HDMIPHY
+ select S5P_DEV_JPEG
+ select S5P_DEV_MFC
+ select S5P_DEV_TV
+ select S5P_DEV_USB_EHCI
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_PWM
help
Machine support for Samsung SMDKV310
config MACH_ARMLEX4210
bool "ARMLEX4210"
select CPU_EXYNOS4210
- select S3C_DEV_RTC
- select S3C_DEV_WDT
+ select EXYNOS4_DEV_AHCI
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS_DEV_DMA
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
- select EXYNOS4_DEV_AHCI
- select EXYNOS_DEV_DMA
- select EXYNOS4_SETUP_SDHCI
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
help
Machine support for Samsung ARMLEX4210 based on EXYNOS4210
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
- select CPU_EXYNOS4210
- select S5P_HRT
select CLKSRC_MMIO
+ select CPU_EXYNOS4210
+ select EXYNOS4_SETUP_FIMC
+ select EXYNOS4_SETUP_FIMD0
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
+ select EXYNOS4_SETUP_I2C5
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
+ select EXYNOS_DEV_DMA
+ select EXYNOS_DEV_DRM
+ select EXYNOS_DEV_SYSMMU
select HAVE_SCHED_CLOCK
- select S5P_GPIO_INT
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_G2D
- select S5P_DEV_CSIS0
- select S5P_DEV_JPEG
- select S5P_DEV_FIMD0
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
@@ -261,21 +261,21 @@
select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S3C_DEV_USB_HSOTG
+ select S5P_DEV_CSIS0
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
+ select S5P_DEV_FIMD0
+ select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
+ select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_ONENAND
select S5P_DEV_TV
- select EXYNOS_DEV_SYSMMU
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_DRM
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C5
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_FIMC
+ select S5P_GPIO_INT
+ select S5P_HRT
select S5P_SETUP_MIPIPHY
- select EXYNOS4_SETUP_USB_PHY
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
@@ -283,30 +283,6 @@
config MACH_NURI
bool "Mobile NURI Board"
select CPU_EXYNOS4210
- select S5P_GPIO_INT
- select S3C_DEV_WDT
- select S3C_DEV_RTC
- select S5P_DEV_FIMD0
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_I2C3
- select S3C_DEV_I2C5
- select S3C_DEV_I2C6
- select S3C_DEV_USB_HSOTG
- select S5P_DEV_CSIS0
- select S5P_DEV_JPEG
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_G2D
- select S5P_DEV_MFC
- select S5P_DEV_USB_EHCI
- select S5P_SETUP_MIPIPHY
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
@@ -315,20 +291,51 @@
select EXYNOS4_SETUP_I2C6
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
+ select EXYNOS_DEV_DMA
+ select EXYNOS_DEV_DRM
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C3
+ select S3C_DEV_I2C5
+ select S3C_DEV_I2C6
+ select S3C_DEV_RTC
+ select S3C_DEV_USB_HSOTG
+ select S3C_DEV_WDT
+ select S5P_DEV_CSIS0
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
+ select S5P_DEV_FIMD0
+ select S5P_DEV_G2D
+ select S5P_DEV_JPEG
+ select S5P_DEV_MFC
+ select S5P_DEV_USB_EHCI
+ select S5P_GPIO_INT
select S5P_SETUP_MIPIPHY
- select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.
config MACH_ORIGEN
bool "ORIGEN"
select CPU_EXYNOS4210
- select S3C_DEV_RTC
- select S3C_DEV_WDT
+ select EXYNOS4_DEV_USB_OHCI
+ select EXYNOS4_SETUP_FIMD0
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
+ select EXYNOS_DEV_DMA
+ select EXYNOS_DEV_DRM
+ select EXYNOS_DEV_SYSMMU
+ select S3C24XX_PWM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
+ select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
+ select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
@@ -342,14 +349,6 @@
select S5P_DEV_USB_EHCI
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
- select EXYNOS_DEV_DRM
- select EXYNOS_DEV_SYSMMU
- select EXYNOS_DEV_DMA
- select EXYNOS4_DEV_USB_OHCI
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select S3C24XX_PWM
help
Machine support for ORIGEN based on Samsung EXYNOS4210
@@ -357,7 +356,17 @@
config MACH_SMDK4212
bool "SMDK4212"
- select SOC_EXYNOS4212
+ select EXYNOS4_SETUP_FIMD0
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
+ select EXYNOS4_SETUP_I2C7
+ select EXYNOS4_SETUP_KEYPAD
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
+ select EXYNOS_DEV_DMA
+ select EXYNOS_DEV_DRM
+ select EXYNOS_DEV_SYSMMU
+ select S3C24XX_PWM
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
@@ -375,17 +384,7 @@
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
- select EXYNOS_DEV_SYSMMU
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_DRM
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C7
- select EXYNOS4_SETUP_KEYPAD
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select S3C24XX_PWM
+ select SOC_EXYNOS4212
help
Machine support for Samsung SMDK4212
@@ -393,8 +392,8 @@
config MACH_SMDK4412
bool "SMDK4412"
- select SOC_EXYNOS4412
select MACH_SMDK4212
+ select SOC_EXYNOS4412
help
Machine support for Samsung SMDK4412
endif
@@ -404,12 +403,12 @@
config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
depends on ARCH_EXYNOS4
- select CPU_EXYNOS4210
- select USE_OF
select ARM_AMBA
+ select CPU_EXYNOS4210
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
select PINCTRL
select PINCTRL_EXYNOS4
+ select USE_OF
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the Exynos4 SoC based board.
@@ -419,9 +418,9 @@
config MACH_EXYNOS5_DT
bool "SAMSUNG EXYNOS5 Machine using device tree"
depends on ARCH_EXYNOS5
+ select ARM_AMBA
select SOC_EXYNOS5250
select USE_OF
- select ARM_AMBA
help
Machine support for Samsung EXYNOS5 machine with device tree enabled.
Select this if a fdt blob is available for the EXYNOS5 SoC based board.
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index f643ef8..abda5a1 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -91,7 +91,7 @@
# EBSA285 board in either host or addin mode
config ARCH_EBSA285
- select ARCH_MAY_HAVE_PC_FDC
bool
+ select ARCH_MAY_HAVE_PC_FDC
endif
diff --git a/arch/arm/mach-h720x/Kconfig b/arch/arm/mach-h720x/Kconfig
index abf356c..6bb755b 100644
--- a/arch/arm/mach-h720x/Kconfig
+++ b/arch/arm/mach-h720x/Kconfig
@@ -12,9 +12,9 @@
config ARCH_H7202
bool "hms30c7202"
+ depends on ARCH_H720X
select CPU_H7202
select ZONE_DMA
- depends on ARCH_H720X
help
Say Y here if you are using the Hynix HMS30C7202 Reference Board
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 32197c1..8d27658 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -41,68 +41,68 @@
config SOC_IMX21
bool
- select MACH_MX21
- select CPU_ARM926T
select COMMON_CLK
+ select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
+ select MACH_MX21
select MXC_AVIC
config SOC_IMX25
bool
select ARCH_MX25
+ select ARCH_MXC_IOMUX_V3
select COMMON_CLK
select CPU_ARM926T
select HAVE_CAN_FLEXCAN if CAN
- select ARCH_MXC_IOMUX_V3
select MXC_AVIC
config SOC_IMX27
bool
- select MACH_MX27
- select CPU_ARM926T
select COMMON_CLK
+ select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
+ select MACH_MX27
select MXC_AVIC
config SOC_IMX31
bool
+ select COMMON_CLK
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select MXC_AVIC
- select COMMON_CLK
select SMP_ON_UP if SMP
config SOC_IMX35
bool
- select CPU_V6K
select ARCH_MXC_IOMUX_V3
select COMMON_CLK
+ select CPU_V6K
+ select HAVE_CAN_FLEXCAN if CAN
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
- select HAVE_CAN_FLEXCAN if CAN
config SOC_IMX5
- select CPU_V7
- select MXC_TZIC
- select COMMON_CLK
- select ARCH_MXC_IOMUX_V3
+ bool
select ARCH_HAS_CPUFREQ
select ARCH_MX5
- bool
+ select ARCH_MXC_IOMUX_V3
+ select COMMON_CLK
+ select CPU_V7
+ select MXC_TZIC
config SOC_IMX50
bool
- select SOC_IMX5
select ARCH_MX50
+ select SOC_IMX5
config SOC_IMX51
bool
- select SOC_IMX5
select ARCH_MX5
select ARCH_MX51
select PINCTRL
select PINCTRL_IMX51
+ select SOC_IMX5
if ARCH_IMX_V4_V5
@@ -112,10 +112,10 @@
config ARCH_MX1ADS
bool "MX1ADS platform"
- select MACH_MXLADS
- select SOC_IMX1
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select MACH_MXLADS
+ select SOC_IMX1
help
Say Y here if you are using Motorola MX1ADS/MXLADS boards
@@ -127,9 +127,9 @@
config MACH_APF9328
bool "APF9328"
- select SOC_IMX1
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX1
help
Say Yes here if you are using the Armadeus APF9328 development board
@@ -137,11 +137,11 @@
config MACH_MX21ADS
bool "MX21ADS platform"
- select SOC_IMX21
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
+ select SOC_IMX21
help
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
@@ -150,22 +150,21 @@
config MACH_MX25_3DS
bool "Support MX25PDK (3DS) Platform"
- select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
- select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_FB
+ select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select SOC_IMX25
config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
- select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
@@ -177,6 +176,7 @@
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
+ select SOC_IMX25
choice
prompt "Baseboard"
@@ -199,20 +199,19 @@
config MACH_MX27ADS
bool "MX27ADS platform"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
+ select SOC_IMX27
help
Include support for MX27ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM038
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
@@ -221,6 +220,7 @@
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
+ select SOC_IMX27
help
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
includes specific configurations for the module and its peripherals.
@@ -242,7 +242,6 @@
config MACH_CPUIMX27
bool "Eukrea CPUIMX27 module"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
@@ -251,6 +250,7 @@
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select MXC_ULPI if USB_ULPI
+ select SOC_IMX27
help
Include support for Eukrea CPUIMX27 platform. This includes
specific configurations for the module and its peripherals.
@@ -292,7 +292,6 @@
config MACH_MX27_3DS
bool "MX27PDK platform"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
@@ -306,13 +305,13 @@
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
select MXC_ULPI if USB_ULPI
+ select SOC_IMX27
help
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX27_VISSTRIM_M10
bool "Vista Silicon i.MX27 Visstrim_m10"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
@@ -321,6 +320,7 @@
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select LEDS_GPIO_REGISTER
+ select SOC_IMX27
help
Include support for Visstrim_m10 platform and its different variants.
This includes specific configurations for the board and its
@@ -328,16 +328,15 @@
config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
- select SOC_IMX27
- select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX27
help
Include support for MX27 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
@@ -350,27 +349,28 @@
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
+ select SOC_IMX27
help
Include support for phyCARD-s (aka pca100) platform. This
includes specific configurations for the module and its peripherals.
config MACH_MXT_TD60
bool "Maxtrack i-MXT TD60"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
+ select SOC_IMX27
help
Include support for i-MXT (aka td60) platform. This
includes specific configurations for the module and its peripherals.
config MACH_IMX27IPCAM
bool "IMX27 IPCAM platform"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX27
help
Include support for IMX27 IPCAM platform. This includes specific
configurations for the board and its peripherals.
@@ -390,11 +390,11 @@
config MACH_MX31ADS
bool "Support MX31ADS platforms"
- select SOC_IMX31
+ default y
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
- default y
+ select SOC_IMX31
help
Include support for MX31ADS platform. This includes specific
configurations for the board and its peripherals.
@@ -412,21 +412,19 @@
config MACH_MX31LILLY
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
- select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
+ select SOC_IMX31
help
Include support for mx31 based LILLY1131 modules. This includes
specific configurations for the board and its peripherals.
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
- select SOC_IMX31
- select MXC_ULPI if USB_ULPI
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -435,13 +433,14 @@
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
+ select MXC_ULPI if USB_ULPI
+ select SOC_IMX31
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM037
bool "Support Phytec pcm037 (i.MX31) platforms"
- select SOC_IMX31
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
@@ -452,6 +451,7 @@
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select MXC_ULPI if USB_ULPI
+ select SOC_IMX31
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
@@ -468,8 +468,6 @@
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
- select SOC_IMX31
- select MXC_DEBUG_BOARD
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
@@ -481,7 +479,9 @@
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_DEBUG_BOARD
select MXC_ULPI if USB_ULPI
+ select SOC_IMX31
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
@@ -497,7 +497,6 @@
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
- select SOC_IMX31
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
@@ -509,22 +508,22 @@
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
select MXC_ULPI if USB_ULPI
+ select SOC_IMX31
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
config MACH_QONG
bool "Support Dave/DENX QongEVB-LITE platform"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX31
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
- select SOC_IMX31
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
@@ -533,23 +532,24 @@
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
+ select SOC_IMX31
help
Include support for Atmark Armadillo-500 platform. This includes
specific configurations for the board and its peripherals.
config MACH_KZM_ARM11_01
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
- select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX31
help
Include support for KZM-ARM11-01. This includes specific
configurations for the board and its peripherals.
config MACH_BUG
bool "Support Buglabs BUGBase platform"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_UART
default y
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select SOC_IMX31
help
Include support for BUGBase 1.3 platform. This includes specific
configurations for the board and its peripherals.
@@ -565,7 +565,6 @@
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
- select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
@@ -577,14 +576,13 @@
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
+ select SOC_IMX35
help
Include support for Phytec pcm043 platform. This includes
specific configurations for the board and its peripherals.
config MACH_MX35_3DS
bool "Support MX35PDK platform"
- select SOC_IMX35
- select MXC_DEBUG_BOARD
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
@@ -595,13 +593,14 @@
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select MXC_DEBUG_BOARD
+ select SOC_IMX35
help
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_EUKREA_CPUIMX35SD
bool "Support Eukrea CPUIMX35 Platform"
- select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
@@ -611,6 +610,7 @@
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_ULPI if USB_ULPI
+ select SOC_IMX35
help
Include support for Eukrea CPUIMX35 platform. This includes
specific configurations for the board and its peripherals.
@@ -635,16 +635,16 @@
config MACH_VPR200
bool "Support VPR200 platform"
- select SOC_IMX35
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select SOC_IMX35
help
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
@@ -654,11 +654,11 @@
config MACH_MX50_RDP
bool "Support MX50 reference design platform"
depends on BROKEN
- select SOC_IMX50
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
+ select SOC_IMX50
help
Include support for MX50 reference design platform (RDP) board. This
includes specific configurations for the board and its peripherals.
@@ -667,15 +667,14 @@
config MACH_IMX51_DT
bool "Support i.MX51 platforms from device tree"
- select SOC_IMX51
select MACH_MX51_BABBAGE
+ select SOC_IMX51
help
Include support for Freescale i.MX51 based platforms
using the device tree for discovery
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
- select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
@@ -683,6 +682,7 @@
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
+ select SOC_IMX51
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
@@ -690,27 +690,27 @@
config MACH_MX51_3DS
bool "Support MX51PDK (3DS)"
- select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
+ select SOC_IMX51
help
Include support for MX51PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_EUKREA_CPUIMX51SD
bool "Support Eukrea CPUIMX51SD module"
- select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
+ select SOC_IMX51
help
Include support for Eukrea CPUIMX51SD platform. This includes
specific configurations for the module and its peripherals.
@@ -736,12 +736,12 @@
config SOC_IMX53
bool "i.MX53 support"
- select SOC_IMX5
select ARCH_MX5
select ARCH_MX53
select HAVE_CAN_FLEXCAN if CAN
select PINCTRL
select PINCTRL_IMX53
+ select SOC_IMX5
help
This enables support for Freescale i.MX53 processor.
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index fd5e7b6..73a2d90 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -234,8 +234,8 @@
config IXP4XX_NPE
tristate "IXP4xx Network Processor Engine support"
- select HOTPLUG
select FW_LOADER
+ select HOTPLUG
help
This driver supports IXP4xx built-in network coprocessors
and is automatically selected by Ethernet and HSS drivers.
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index d697d07..178d4da 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -107,22 +107,22 @@
config CPU_PXA168
bool
- select CPU_MOHAWK
select COMMON_CLK
+ select CPU_MOHAWK
help
Select code specific to PXA168
config CPU_PXA910
bool
- select CPU_MOHAWK
select COMMON_CLK
+ select CPU_MOHAWK
help
Select code specific to PXA910
config CPU_MMP2
bool
- select CPU_PJ4
select COMMON_CLK
+ select CPU_PJ4
help
Select code specific to MMP2. MMP2 is ARMv7 compatible.
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 7902de15..b619085 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -10,35 +10,35 @@
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
- select MACH_TROUT if !MACH_HALIBUT
select ARCH_MSM_ARM11
- select MSM_SMD
- select MSM_SMD_PKG3
select CPU_V6
select GPIO_MSM_V1
+ select MACH_TROUT if !MACH_HALIBUT
select MSM_PROC_COMM
+ select MSM_SMD
+ select MSM_SMD_PKG3
config ARCH_MSM7X30
bool "MSM7x30"
- select MACH_MSM7X30_SURF # if !
select ARCH_MSM_SCORPION
+ select CPU_V7
+ select GPIO_MSM_V1
+ select MACH_MSM7X30_SURF # if !
+ select MSM_GPIOMUX
+ select MSM_PROC_COMM
select MSM_SMD
select MSM_VIC
- select CPU_V7
- select MSM_GPIOMUX
- select GPIO_MSM_V1
- select MSM_PROC_COMM
config ARCH_QSD8X50
bool "QSD8X50"
- select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
select ARCH_MSM_SCORPION
+ select CPU_V7
+ select GPIO_MSM_V1
+ select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
+ select MSM_GPIOMUX
+ select MSM_PROC_COMM
select MSM_SMD
select MSM_VIC
- select CPU_V7
- select MSM_GPIOMUX
- select GPIO_MSM_V1
- select MSM_PROC_COMM
endchoice
@@ -47,10 +47,10 @@
select ARCH_MSM_SCORPIONMP
select ARM_GIC
select CPU_V7
- select MSM_V2_TLMM
select GPIO_MSM_V2
select MSM_GPIOMUX
select MSM_SCM if SMP
+ select MSM_V2_TLMM
select USE_OF
config ARCH_MSM8960
@@ -58,9 +58,9 @@
select ARCH_MSM_SCORPIONMP
select ARM_GIC
select CPU_V7
- select MSM_V2_TLMM
select MSM_GPIOMUX
select MSM_SCM if SMP
+ select MSM_V2_TLMM
select USE_OF
config MSM_HAS_DEBUG_UART_HS
@@ -110,8 +110,8 @@
config MACH_QSD8X50A_ST1_5
depends on ARCH_QSD8X50
- select MSM_SOC_REV_A
bool "QSD8x50A ST1.5"
+ select MSM_SOC_REV_A
help
Support for the Qualcomm ST1.5.
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 365879b..c744946 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -4,8 +4,8 @@
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
- select NOMADIK_8815
select HAS_MTU
+ select NOMADIK_8815
endmenu
@@ -16,7 +16,7 @@
tristate "Driver for bit-bang busses found on the 8815 NHK"
depends on I2C && MACH_NOMADIK_8815NHK
depends on PINCTRL_NOMADIK
- select I2C_ALGOBIT
default y
+ select I2C_ALGOBIT
endif
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index cba3f71..903da8e 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -8,15 +8,15 @@
config ARCH_OMAP730
depends on ARCH_OMAP1
bool "OMAP730 Based System"
+ select ARCH_OMAP_OTG
select CPU_ARM926T
select OMAP_MPU_TIMER
- select ARCH_OMAP_OTG
config ARCH_OMAP850
depends on ARCH_OMAP1
bool "OMAP850 Based System"
- select CPU_ARM926T
select ARCH_OMAP_OTG
+ select CPU_ARM926T
config ARCH_OMAP15XX
depends on ARCH_OMAP1
@@ -28,8 +28,8 @@
config ARCH_OMAP16XX
depends on ARCH_OMAP1
bool "OMAP16xx Based System"
- select CPU_ARM926T
select ARCH_OMAP_OTG
+ select CPU_ARM926T
comment "OMAP Board Type"
depends on ARCH_OMAP1
@@ -132,8 +132,8 @@
config MACH_SX1
bool "Siemens SX1"
- select I2C
depends on ARCH_OMAP1 && ARCH_OMAP15XX
+ select I2C
help
Support for the Siemens SX1 phone. To boot the kernel,
you'll need a SX1 compatible bootloader; check out
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index a6219ea..2a1a898 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -6,19 +6,19 @@
bool "Typical OMAP configuration"
default y
select AEABI
- select REGULATOR
- select PM_RUNTIME
- select VFP
- select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
- select SERIAL_OMAP
- select SERIAL_OMAP_CONSOLE
+ select HIGHMEM
select I2C
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
+ select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+ select PINCTRL
+ select PM_RUNTIME
+ select REGULATOR
+ select SERIAL_OMAP
+ select SERIAL_OMAP_CONSOLE
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
- select HIGHMEM
- select PINCTRL
+ select VFP
help
Compile a kernel suitable for booting most boards
@@ -40,44 +40,44 @@
bool "TI OMAP3"
depends on ARCH_OMAP2PLUS
default y
- select CPU_V7
- select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARCH_HAS_OPP
- select PM_RUNTIME if CPU_IDLE
- select PM_OPP if PM
select ARM_CPU_SUSPEND if PM
+ select CPU_V7
select MULTI_IRQ_HANDLER
- select SOC_HAS_OMAP2_SDRC
select OMAP_INTERCONNECT
+ select PM_OPP if PM
+ select PM_RUNTIME if CPU_IDLE
+ select SOC_HAS_OMAP2_SDRC
+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
config ARCH_OMAP4
bool "TI OMAP4"
default y
depends on ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
+ select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
+ select ARM_CPU_SUSPEND if PM
+ select ARM_ERRATA_720789
+ select ARM_GIC
select CACHE_L2X0
select CPU_V7
- select ARM_GIC
select HAVE_SMP
select LOCAL_TIMERS if SMP
+ select OMAP_INTERCONNECT
select PL310_ERRATA_588369
select PL310_ERRATA_727915
- select ARM_ERRATA_720789
- select ARCH_HAS_OPP
- select PM_RUNTIME if CPU_IDLE
select PM_OPP if PM
+ select PM_RUNTIME if CPU_IDLE
select USB_ARCH_HAS_EHCI if USB_SUPPORT
- select ARM_CPU_SUSPEND if PM
- select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
- select OMAP_INTERCONNECT
config SOC_OMAP5
bool "TI OMAP5"
- select CPU_V7
- select ARM_GIC
- select HAVE_SMP
- select ARM_CPU_SUSPEND if PM
- select SOC_HAS_REALTIME_COUNTER
select ARM_ARCH_TIMER
+ select ARM_CPU_SUSPEND if PM
+ select ARM_GIC
+ select CPU_V7
+ select HAVE_SMP
+ select SOC_HAS_REALTIME_COUNTER
comment "OMAP Core Type"
depends on ARCH_OMAP2
@@ -109,8 +109,8 @@
config SOC_AM33XX
bool "AM33XX support"
default y
- select CPU_V7
select ARM_CPU_SUSPEND if PM
+ select CPU_V7
select MULTI_IRQ_HANDLER
config OMAP_PACKAGE_ZAF
@@ -157,8 +157,8 @@
bool "OMAP 2420 H4 board"
depends on SOC_OMAP2420
default y
- select OMAP_PACKAGE_ZAF
select OMAP_DEBUG_DEVICES
+ select OMAP_PACKAGE_ZAF
config MACH_OMAP_APOLLON
bool "OMAP 2420 Apollon board"
@@ -193,8 +193,8 @@
config MACH_OMAP3530_LV_SOM
bool "OMAP3 Logic 3530 LV SOM board"
depends on ARCH_OMAP3
- select OMAP_PACKAGE_CBB
default y
+ select OMAP_PACKAGE_CBB
help
Support for the LogicPD OMAP3530 SOM Development kit
for full description please see the products webpage at
@@ -203,8 +203,8 @@
config MACH_OMAP3_TORPEDO
bool "OMAP3 Logic 35x Torpedo board"
depends on ARCH_OMAP3
- select OMAP_PACKAGE_CBB
default y
+ select OMAP_PACKAGE_CBB
help
Support for the LogicPD OMAP35x Torpedo Development kit
for full description please see the products webpage at
@@ -265,17 +265,17 @@
bool "Nokia N800/N810"
depends on SOC_OMAP2420
default y
- select OMAP_PACKAGE_ZAC
select MACH_NOKIA_N800
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
+ select OMAP_PACKAGE_ZAC
config MACH_NOKIA_RM680
bool "Nokia RM-680/696 board"
depends on ARCH_OMAP3
default y
- select OMAP_PACKAGE_CBB
select MACH_NOKIA_RM696
+ select OMAP_PACKAGE_CBB
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
@@ -288,20 +288,20 @@
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
- select SERIAL_8250
- select SERIAL_CORE_CONSOLE
- select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select SERIAL_8250
+ select SERIAL_8250_CONSOLE
+ select SERIAL_CORE_CONSOLE
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBP
- select SERIAL_8250
- select SERIAL_CORE_CONSOLE
- select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select SERIAL_8250
+ select SERIAL_8250_CONSOLE
+ select SERIAL_CORE_CONSOLE
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"
@@ -329,8 +329,8 @@
bool "IGEP OMAP3 module"
depends on ARCH_OMAP3
default y
- select OMAP_PACKAGE_CBB
select MACH_IGEP0020
+ select OMAP_PACKAGE_CBB
config MACH_SBC3530
bool "OMAP3 SBC STALKER board"
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 41fc853..558ccfb 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -6,8 +6,8 @@
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
default y
select CPU_V7
- select ZONE_DMA
select SIRF_IRQ
+ select ZONE_DMA
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8e6288d..11aa739 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -27,10 +27,10 @@
config MACH_PXA3XX_DT
bool "Support PXA3xx platforms from device tree"
- select PXA3xx
select CPU_PXA300
- select POWER_SUPPLY
select HAVE_PWM
+ select POWER_SUPPLY
+ select PXA3xx
select USE_OF
help
Include support for Marvell PXA3xx based platforms using
@@ -44,13 +44,13 @@
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
- select PXA27x
select HAVE_PWM
+ select PXA27x
config MACH_ZYLONITE
bool
- select PXA3xx
select HAVE_PWM
+ select PXA3xx
config MACH_ZYLONITE300
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
@@ -65,19 +65,19 @@
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
- select PXA3xx
select CPU_PXA300
select CPU_PXA310
+ select PXA3xx
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
- select PXA3xx
select CPU_PXA930
+ select PXA3xx
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
- select PXA3xx
select CPU_PXA930
+ select PXA3xx
comment "Third Party Dev Platforms (sorted by vendor name)"
@@ -87,29 +87,29 @@
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
- select PXA25x
- select ISA
- select I2C_GPIO
- select HAVE_PWM
- select PXA_HAVE_ISA_IRQS
select ARCOM_PCMCIA
+ select HAVE_PWM
+ select I2C_GPIO
+ select ISA
+ select PXA25x
+ select PXA_HAVE_ISA_IRQS
config MACH_ARCOM_ZEUS
bool "Arcom/Eurotech ZEUS SBC"
- select PXA27x
- select ISA
- select PXA_HAVE_ISA_IRQS
select ARCOM_PCMCIA
+ select ISA
+ select PXA27x
+ select PXA_HAVE_ISA_IRQS
config MACH_BALLOON3
bool "Balloon 3 board"
- select PXA27x
select IWMMXT
+ select PXA27x
config MACH_CSB726
bool "Enable Cogent CSB726 System On a Module"
- select PXA27x
select IWMMXT
+ select PXA27x
help
Say Y here if you intend to run this kernel on a Cogent
CSB726 System On Module.
@@ -121,11 +121,11 @@
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
- select PXA27x
select IWMMXT
- select PXA25x
select MIGHT_HAVE_PCI
select NEED_MACH_IO_H if PCI
+ select PXA25x
+ select PXA27x
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
@@ -137,10 +137,10 @@
config MACH_CM_X300
bool "CompuLab CM-X300 modules"
- select PXA3xx
select CPU_PXA300
select CPU_PXA310
select HAVE_PWM
+ select PXA3xx
config MACH_CAPC7117
bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
@@ -168,22 +168,22 @@
config MACH_INTELMOTE2
bool "Intel Mote 2 Platform"
- select PXA27x
select IWMMXT
+ select PXA27x
config MACH_STARGATE2
bool "Intel Stargate 2 Platform"
- select PXA27x
select IWMMXT
+ select PXA27x
config MACH_XCEP
bool "Iskratel Electronics XCEP"
- select PXA25x
select MTD
- select MTD_PHYSMAP
- select MTD_CFI_INTELEXT
select MTD_CFI
+ select MTD_CFI_INTELEXT
select MTD_CHAR
+ select MTD_PHYSMAP
+ select PXA25x
select SMC91X
help
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
@@ -195,14 +195,14 @@
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA
- select TRIZEPS_PCMCIA
select PXA27x
+ select TRIZEPS_PCMCIA
config MACH_TRIZEPS4WL
bool "Keith und Koep Trizeps4-WL DIMM-Module"
depends on TRIZEPS_PXA
- select TRIZEPS_PCMCIA
select PXA27x
+ select TRIZEPS_PCMCIA
choice
prompt "Select base board for Trizeps module"
@@ -231,18 +231,18 @@
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
- select PXA27x
select HAVE_PWM
+ select PXA27x
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
- select PXA27x
select IWMMXT
+ select PXA27x
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
- select HAVE_PWM
depends on MACH_PCM027
+ select HAVE_PWM
choice
prompt "display on pcm990"
@@ -266,19 +266,19 @@
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
depends on MACH_COLIBRI
- select PXA27x
select HAVE_PWM
+ select PXA27x
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
- select PXA3xx
select CPU_PXA300
select CPU_PXA310
+ select PXA3xx
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
- select PXA3xx
select CPU_PXA320
+ select PXA3xx
config MACH_COLIBRI_EVALBOARD
bool "Toradex Colibri Evaluation Carrier Board support"
@@ -286,8 +286,8 @@
config MACH_VPAC270
bool "Voipac PXA270"
- select PXA27x
select HAVE_PATA_PLATFORM
+ select PXA27x
help
PXA270 based Single Board Computer.
@@ -295,9 +295,9 @@
config MACH_H4700
bool "HP iPAQ hx4700"
- select PXA27x
- select IWMMXT
select HAVE_PWM
+ select IWMMXT
+ select PXA27x
config MACH_H5000
bool "HP iPAQ h5000"
@@ -309,16 +309,16 @@
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
- select PXA27x
- select IWMMXT
select HAVE_PWM
+ select IWMMXT
+ select PXA27x
config MACH_MIOA701
bool "Mitac Mio A701 Support"
- select PXA27x
- select IWMMXT
- select HAVE_PWM
select GPIO_SYSFS
+ select HAVE_PWM
+ select IWMMXT
+ select PXA27x
help
Say Y here if you intend to run this kernel on a
MIO A701. Currently there is only basic support
@@ -326,9 +326,9 @@
config PXA_EZX
bool "Motorola EZX Platform"
- select PXA27x
- select IWMMXT
select HAVE_PWM
+ select IWMMXT
+ select PXA27x
config MACH_EZX_A780
bool "Motorola EZX A780"
@@ -393,9 +393,9 @@
bool "Palm Tungsten|T5"
default y
depends on ARCH_PXA_PALM
- select PXA27x
select IWMMXT
select MACH_PALM27X
+ select PXA27x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
@@ -404,9 +404,9 @@
bool "Palm T|X"
default y
depends on ARCH_PXA_PALM
- select PXA27x
select IWMMXT
select MACH_PALM27X
+ select PXA27x
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
@@ -415,9 +415,9 @@
bool "Palm Zire 72"
default y
depends on ARCH_PXA_PALM
- select PXA27x
select IWMMXT
select MACH_PALM27X
+ select PXA27x
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
@@ -426,9 +426,9 @@
bool "Palm LifeDrive"
default y
depends on ARCH_PXA_PALM
- select PXA27x
select IWMMXT
select MACH_PALM27X
+ select PXA27x
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
@@ -441,10 +441,10 @@
bool "Palm Centro 685 (GSM)"
default y
depends on ARCH_PXA_PALM
- select MACH_PALM27X
- select PXA27x
select IWMMXT
+ select MACH_PALM27X
select PALM_TREO
+ select PXA27x
help
Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
smartphone.
@@ -453,37 +453,37 @@
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
- select MACH_PALM27X
- select PXA27x
select IWMMXT
+ select MACH_PALM27X
select PALM_TREO
+ select PXA27x
help
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
config MACH_RAUMFELD_RC
bool "Raumfeld Controller"
- select PXA3xx
select CPU_PXA300
- select POWER_SUPPLY
select HAVE_PWM
+ select POWER_SUPPLY
+ select PXA3xx
config MACH_RAUMFELD_CONNECTOR
bool "Raumfeld Connector"
+ select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
- select CPU_PXA300
config MACH_RAUMFELD_SPEAKER
bool "Raumfeld Speaker"
+ select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
- select CPU_PXA300
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
- select SHARP_SCOOP
select SHARP_PARAM
+ select SHARP_SCOOP
help
Say Y here if you intend to run this kernel on a
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
@@ -526,11 +526,11 @@
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
depends on PXA_SHARPSL
- select PXA27x
- select PXA_SHARP_Cxx00
- select MACH_SPITZ
select I2C
select I2C_PXA
+ select MACH_SPITZ
+ select PXA27x
+ select PXA_SHARP_Cxx00
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
@@ -575,8 +575,8 @@
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
- select PXA25x
select FB_W100
+ select PXA25x
config MACH_E330
bool "Toshiba e330"
@@ -628,8 +628,8 @@
config MACH_ZIPIT2
bool "Zipit Z2 Handheld"
- select PXA27x
select HAVE_PWM
+ select PXA27x
endif
endmenu
@@ -720,9 +720,9 @@
config SHARPSL_PM_MAX1111
bool
select HWMON
+ select SENSORS_MAX1111
select SPI
select SPI_MASTER
- select SENSORS_MAX1111
config PXA_HAVE_ISA_IRQS
bool
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index c593be4..14c1d47 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -21,8 +21,8 @@
config REALVIEW_EB_ARM11MP
bool "Support ARM11MPCore Tile"
depends on MACH_REALVIEW_EB
- select CPU_V6K
select ARCH_HAS_BARRIERS if SMP
+ select CPU_V6K
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
@@ -40,12 +40,12 @@
config MACH_REALVIEW_PB11MP
bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
- select CPU_V6K
+ select ARCH_HAS_BARRIERS if SMP
select ARM_GIC
+ select CPU_V6K
select HAVE_PATA_PLATFORM
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
- select ARCH_HAS_BARRIERS if SMP
help
Include support for the ARM(R) RealView(R) Platform Baseboard for
the ARM11MPCore. This platform has an on-board ARM11MPCore and has
@@ -54,8 +54,8 @@
# ARMv6 CPU without K extensions, but does have the new exclusive ops
config MACH_REALVIEW_PB1176
bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
- select CPU_V6
select ARM_GIC
+ select CPU_V6
select HAVE_TCM
select MIGHT_HAVE_CACHE_L2X0
help
@@ -73,8 +73,8 @@
config MACH_REALVIEW_PBA8
bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
- select CPU_V7
select ARM_GIC
+ select CPU_V7
select HAVE_PATA_PLATFORM
help
Include support for the ARM(R) RealView Platform Baseboard for
@@ -83,11 +83,11 @@
config MACH_REALVIEW_PBX
bool "Support RealView(R) Platform Baseboard Explore"
+ select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
select ARM_GIC
select HAVE_PATA_PLATFORM
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
- select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
select ZONE_DMA if SPARSEMEM
help
Include support for the ARM(R) RealView(R) Platform Baseboard
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index c5256f4..495f692 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -7,7 +7,7 @@
config S3C2412_CPUFREQ
bool
depends on CPU_FREQ_S3C24XX && CPU_S3C2412
- select S3C2412_IOTIMING
default y
+ select S3C2412_IOTIMING
help
CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index ece7a10..a4d7fd2 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -5,8 +5,8 @@
config S3C2440_CPUFREQ
bool "S3C2440/S3C2442 CPU Frequency scaling support"
depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
- select S3C2410_CPUFREQ_UTILS
default y
+ select S3C2410_CPUFREQ_UTILS
help
CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index d56b0f7..2b6cb5f 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -17,10 +17,10 @@
bool "SAMSUNG S3C2410"
default y
select CPU_ARM920T
- select S3C2410_CLOCK
select CPU_LLSERIAL_S3C2410
- select S3C2410_PM if PM
+ select S3C2410_CLOCK
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+ select S3C2410_PM if PM
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
@@ -30,8 +30,8 @@
depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
- select S3C2412_PM if PM
select S3C2412_DMA if S3C24XX_DMA
+ select S3C2412_PM if PM
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
@@ -40,10 +40,10 @@
depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
- select SAMSUNG_CLKSRC
+ select S3C2416_PM if PM
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
- select S3C2416_PM if PM
+ select SAMSUNG_CLKSRC
help
Support for the S3C2416 SoC from the S3C24XX line
@@ -75,9 +75,9 @@
depends on ARCH_S3C24XX
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
- select SAMSUNG_CLKSRC
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
+ select SAMSUNG_CLKSRC
help
Support for the S3C2443 SoC from the S3C24XX line
@@ -156,16 +156,16 @@
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
- select S3C2410_IOTIMING if S3C2410_CPUFREQ
- select S3C24XX_SIMTEC_PM if PM
- select S3C24XX_SIMTEC_NOR
- select S3C24XX_SIMTEC_USB
- select MACH_BAST_IDE
- select S3C24XX_DCLK
select ISA
+ select MACH_BAST_IDE
+ select S3C2410_IOTIMING if S3C2410_CPUFREQ
+ select S3C24XX_DCLK
+ select S3C24XX_SIMTEC_NOR
+ select S3C24XX_SIMTEC_PM if PM
+ select S3C24XX_SIMTEC_USB
select S3C_DEV_HWMON
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
@@ -181,9 +181,9 @@
config ARCH_H1940
bool "IPAQ H1940"
select PM_H1940 if PM
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
select S3C24XX_SETUP_TS
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the HP IPAQ H1940
@@ -203,23 +203,23 @@
config MACH_N30
bool "Acer N30 family"
select MACH_N35
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
config MACH_OTOM
bool "NexVision OTOM Board"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision OTOM board
config MACH_QT2410
bool "QT2410"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Armzone QT2410
@@ -239,12 +239,12 @@
config MACH_VR1000
bool "Thorcom VR1000"
- select S3C24XX_SIMTEC_PM if PM
+ select MACH_BAST_IDE
select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
- select MACH_BAST_IDE
- select S3C_DEV_USB_HOST
+ select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Thorcom VR1000 board.
@@ -285,8 +285,8 @@
config MACH_JIVE
bool "Logitech Jive"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Logitech Jive.
@@ -314,15 +314,15 @@
bool "SMDK2413"
select MACH_S3C2413
select S3C24XX_SMDK
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using an SMDK2413
config MACH_VSTMS
bool "VMSTMS"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using an VSTMS board
@@ -351,13 +351,13 @@
config MACH_SMDK2416
bool "SMDK2416"
+ select S3C2416_SETUP_SDHCI
select S3C24XX_SMDK
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
- select S3C2416_SETUP_SDHCI
help
Say Y here if you are using an SMDK2416
@@ -379,11 +379,11 @@
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
- select S3C24XX_DCLK
- select S3C24XX_SIMTEC_PM if PM
select HAVE_PATA_PLATFORM
- select S3C24XX_GPIO_EXTRA64
select S3C2440_XTAL_12000000
+ select S3C24XX_DCLK
+ select S3C24XX_GPIO_EXTRA64
+ select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
@@ -391,18 +391,18 @@
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the AT2440EVB development board
config MACH_MINI2440
bool "MINI2440 development board"
select EEPROM_AT24
- select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGER
select LEDS_TRIGGER_BACKLIGHT
+ select NEW_LEDS
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
@@ -412,20 +412,20 @@
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select S3C2440_XTAL_12000000
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
- select S3C24XX_DCLK
- select S3C24XX_SIMTEC_PM if PM
- select S3C24XX_GPIO_EXTRA128
- select S3C2440_XTAL_12000000
select S3C2410_IOTIMING if S3C2440_CPUFREQ
- select S3C_DEV_USB_HOST
+ select S3C2440_XTAL_12000000
+ select S3C24XX_DCLK
+ select S3C24XX_GPIO_EXTRA128
+ select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
@@ -445,8 +445,8 @@
config MACH_RX3715
bool "HP iPAQ rx3715"
- select S3C2440_XTAL_16934400
select PM_H1940 if PM
+ select S3C2440_XTAL_16934400
select S3C_DEV_NAND
help
Say Y here if you are using the HP iPAQ rx3715.
@@ -455,8 +455,8 @@
bool "SMDK2440"
select S3C2440_XTAL_16934400
select S3C24XX_SMDK
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the SMDK2440.
@@ -478,11 +478,11 @@
config MACH_NEO1973_GTA02
bool "Openmoko GTA02 / Freerunner phone"
+ select I2C
+ select MACH_NEO1973
select MFD_PCF50633
select PCF50633_GPIO
- select I2C
select POWER_SUPPLY
- select MACH_NEO1973
select S3C24XX_PWM
select S3C_DEV_USB_HOST
help
@@ -490,13 +490,13 @@
config MACH_RX1950
bool "HP iPAQ rx1950"
- select S3C24XX_DCLK
- select PM_H1940 if PM
select I2C
- select S3C24XX_PWM
- select S3C_DEV_NAND
+ select PM_H1940 if PM
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
+ select S3C24XX_DCLK
+ select S3C24XX_PWM
+ select S3C_DEV_NAND
help
Say Y here if you're using HP iPAQ rx1950
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 06ca1cd..63e7ae3 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -7,9 +7,9 @@
config PLAT_S3C64XX
bool
depends on ARCH_S3C64XX
- select SAMSUNG_WAKEMASK
- select PM_GENERIC_DOMAINS
default y
+ select PM_GENERIC_DOMAINS
+ select SAMSUNG_WAKEMASK
help
Base platform code for any Samsung S3C64XX device
@@ -31,8 +31,8 @@
select S3C_DMA
config S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_SDHCI_GPIO
bool
+ select S3C64XX_SETUP_SDHCI_GPIO
help
Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
@@ -93,9 +93,9 @@
config MACH_SMDK6400
bool "SMDK6400"
select CPU_S3C6400
+ select S3C64XX_SETUP_SDHCI
select S3C_DEV_HSMMC
select S3C_DEV_NAND
- select S3C64XX_SETUP_SDHCI
help
Machine support for the Samsung SMDK6400
@@ -104,21 +104,21 @@
config MACH_ANW6410
bool "A&W6410"
select CPU_S3C6410
- select S3C_DEV_FB
select S3C64XX_SETUP_FB_24BPP
+ select S3C_DEV_FB
help
Machine support for the A&W6410
config MACH_MINI6410
bool "MINI6410"
select CPU_S3C6410
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_SDHCI
+ select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_USB_HOST
select S3C_DEV_NAND
- select S3C_DEV_FB
- select S3C64XX_SETUP_FB_24BPP
+ select S3C_DEV_USB_HOST
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
help
@@ -127,42 +127,42 @@
config MACH_REAL6410
bool "REAL6410"
select CPU_S3C6410
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
+ select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
select S3C_DEV_FB
- select S3C64XX_SETUP_FB_24BPP
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
- select S3C_DEV_USB_HOST
help
Machine support for the CoreWind REAL6410
config MACH_SMDK6410
bool "SMDK6410"
select CPU_S3C6410
- select SAMSUNG_DEV_ADC
+ select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_I2C1
+ select S3C64XX_SETUP_IDE
+ select S3C64XX_SETUP_KEYPAD
+ select S3C64XX_SETUP_SDHCI
+ select S3C64XX_SETUP_USB_PHY
+ select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
- select SAMSUNG_DEV_IDE
- select S3C_DEV_FB
select S3C_DEV_RTC
- select SAMSUNG_DEV_TS
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
+ select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_I2C1
- select S3C64XX_SETUP_IDE
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_KEYPAD
- select S3C64XX_SETUP_USB_PHY
+ select SAMSUNG_DEV_TS
help
Machine support for the Samsung SMDK6410
@@ -198,13 +198,13 @@
config SMDK6410_WM1190_EV1
bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
depends on MACH_SMDK6410
+ select MFD_WM8350_CONFIG_MODE_0
+ select MFD_WM8350_CONFIG_MODE_3
+ select MFD_WM8350_I2C
+ select MFD_WM8352_CONFIG_MODE_0
select REGULATOR
select REGULATOR_WM8350
select SAMSUNG_GPIO_EXTRA64
- select MFD_WM8350_I2C
- select MFD_WM8350_CONFIG_MODE_0
- select MFD_WM8350_CONFIG_MODE_3
- select MFD_WM8352_CONFIG_MODE_0
help
The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
and audio daughtercard for the Samsung SMDK6410 reference
@@ -216,11 +216,11 @@
config SMDK6410_WM1192_EV1
bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
depends on MACH_SMDK6410
+ select MFD_WM831X
+ select MFD_WM831X_I2C
select REGULATOR
select REGULATOR_WM831X
select SAMSUNG_GPIO_EXTRA64
- select MFD_WM831X
- select MFD_WM831X_I2C
help
The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
daughtercard for the Samsung SMDK6410 reference platform.
@@ -232,19 +232,19 @@
config MACH_NCP
bool "NCP"
select CPU_S3C6410
- select S3C_DEV_I2C1
- select S3C_DEV_HSMMC1
select S3C64XX_SETUP_I2C1
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_I2C1
help
Machine support for the Samsung NCP
config MACH_HMT
bool "Airgoo HMT"
select CPU_S3C6410
+ select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
- select S3C64XX_SETUP_FB_24BPP
select SAMSUNG_DEV_PWM
help
Machine support for the Airgoo HMT
@@ -252,17 +252,17 @@
config MACH_SMARTQ
bool
select CPU_S3C6410
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_SDHCI
+ select S3C64XX_SETUP_USB_PHY
+ select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
- select S3C_DEV_FB
select S3C_DEV_HWMON
select S3C_DEV_RTC
- select S3C_DEV_USB_HSOTG
select S3C_DEV_USB_HOST
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_USB_PHY
+ select S3C_DEV_USB_HSOTG
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
@@ -284,26 +284,26 @@
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
select CPU_S3C6410
- select S3C64XX_SETUP_SDHCI
+ select I2C
+ select LEDS_GPIO_REGISTER
+ select S3C64XX_DEV_SPI0
+ select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
- select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_KEYPAD
+ select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_SPI
select S3C64XX_SETUP_USB_PHY
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_KEYPAD
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
- select S3C_DEV_WDT
select S3C_DEV_RTC
- select S3C64XX_DEV_SPI0
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_USB_HSOTG
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_KEYPAD
select SAMSUNG_GPIO_EXTRA128
- select I2C
- select LEDS_GPIO_REGISTER
help
Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index c87f610..e8742cb 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -9,18 +9,18 @@
config CPU_S5P6440
bool
- select SAMSUNG_DMADEV
select S5P_HRT
select S5P_SLEEP if PM
+ select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
- select SAMSUNG_DMADEV
select S5P_HRT
select S5P_SLEEP if PM
+ select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6450 CPU support
@@ -52,19 +52,19 @@
bool "SMDK6440"
select CPU_S5P6440
select S3C_DEV_FB
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_WDT
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
+ select S3C_DEV_I2C1
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S5P64X0_SETUP_FB_24BPP
+ select S5P64X0_SETUP_I2C1
+ select S5P64X0_SETUP_SDHCI_GPIO
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
- select S5P64X0_SETUP_FB_24BPP
- select S5P64X0_SETUP_I2C1
- select S5P64X0_SETUP_SDHCI_GPIO
help
Machine support for the Samsung SMDK6440
@@ -72,19 +72,19 @@
bool "SMDK6450"
select CPU_S5P6450
select S3C_DEV_FB
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_WDT
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
+ select S3C_DEV_I2C1
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S5P64X0_SETUP_FB_24BPP
+ select S5P64X0_SETUP_I2C1
+ select S5P64X0_SETUP_SDHCI_GPIO
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
- select S5P64X0_SETUP_FB_24BPP
- select S5P64X0_SETUP_I2C1
- select S5P64X0_SETUP_SDHCI_GPIO
help
Machine support for the Samsung SMDK6450
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 75a26ea..15170be 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -60,12 +60,6 @@
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_IDE
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
select S5PC100_SETUP_FB_24BPP
select S5PC100_SETUP_I2C1
select S5PC100_SETUP_IDE
@@ -74,6 +68,12 @@
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_IDE
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_PWM
+ select SAMSUNG_DEV_TS
help
Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 77185c3..92ad72f 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -11,11 +11,11 @@
config CPU_S5PV210
bool
- select SAMSUNG_DMADEV
select S5P_EXT_INT
select S5P_HRT
select S5P_PM if PM
select S5P_SLEEP if PM
+ select SAMSUNG_DMADEV
help
Enable S5PV210 CPU support
@@ -76,44 +76,44 @@
bool "Aquila"
select CPU_S5PV210
select S3C_DEV_FB
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
- select S5P_DEV_ONENAND
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_SDHCI
select S5PV210_SETUP_USB_PHY
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_ONENAND
help
Machine support for the Samsung Aquila target based on S5PC110 SoC
config MACH_GONI
bool "GONI"
select CPU_S5PV210
- select S5P_GPIO_INT
select S3C_DEV_FB
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_I2C2
- select S5P_DEV_MFC
select S3C_DEV_USB_HSOTG
- select S5P_DEV_ONENAND
- select SAMSUNG_DEV_KEYPAD
- select S5P_DEV_TV
select S5PV210_SETUP_FB_24BPP
+ select S5PV210_SETUP_FIMC
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
- select S5PV210_SETUP_FIMC
select S5PV210_SETUP_USB_PHY
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_MFC
+ select S5P_DEV_ONENAND
+ select S5P_DEV_TV
+ select S5P_GPIO_INT
+ select SAMSUNG_DEV_KEYPAD
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
@@ -125,14 +125,14 @@
select S3C_DEV_I2C2
select S3C_DEV_RTC
select S3C_DEV_WDT
+ select S5PV210_SETUP_I2C1
+ select S5PV210_SETUP_I2C2
+ select S5PV210_SETUP_IDE
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_MFC
select SAMSUNG_DEV_IDE
- select S5PV210_SETUP_I2C1
- select S5PV210_SETUP_I2C2
- select S5PV210_SETUP_IDE
help
Machine support for Samsung SMDKC110
S5PC110(MCP) is one of package option of S5PV210
@@ -154,6 +154,13 @@
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
+ select S5PV210_SETUP_FB_24BPP
+ select S5PV210_SETUP_I2C1
+ select S5PV210_SETUP_I2C2
+ select S5PV210_SETUP_IDE
+ select S5PV210_SETUP_KEYPAD
+ select S5PV210_SETUP_SDHCI
+ select S5PV210_SETUP_USB_PHY
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
@@ -165,20 +172,13 @@
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
- select S5PV210_SETUP_FB_24BPP
- select S5PV210_SETUP_I2C1
- select S5PV210_SETUP_I2C2
- select S5PV210_SETUP_IDE
- select S5PV210_SETUP_KEYPAD
- select S5PV210_SETUP_SDHCI
- select S5PV210_SETUP_USB_PHY
help
Machine support for Samsung SMDKV210
config MACH_TORBRECK
bool "Torbreck"
- select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
+ select CPU_S5PV210
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 42625e4..ca14dbd 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -49,15 +49,15 @@
bool "Sharp Zaurus SL5500"
# FIXME: select CPU_FREQ_SA11x0
select SHARP_LOCOMO
- select SHARP_SCOOP
select SHARP_PARAM
+ select SHARP_SCOOP
help
Say Y here to support the Sharp Zaurus SL5500 PDAs.
config SA1100_H3100
bool "Compaq iPAQ H3100"
- select HTC_EGPIO
select CPU_FREQ_SA1110
+ select HTC_EGPIO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
@@ -67,8 +67,8 @@
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
- select HTC_EGPIO
select CPU_FREQ_SA1110
+ select HTC_EGPIO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
@@ -78,16 +78,16 @@
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
- select SA1111
select CPU_FREQ_SA1100
+ select SA1111
help
Say Y here if you want to build a kernel for the HP Laboratories
BadgePAD 4.
config SA1100_JORNADA720
bool "HP Jornada 720"
- select SA1111
# FIXME: select CPU_FREQ_SA11x0
+ select SA1111
help
Say Y here if you want to build a kernel for the HP Jornada 720
handheld computer. See
@@ -95,8 +95,8 @@
config SA1100_JORNADA720_SSP
bool "HP Jornada 720 Extended SSP driver"
- select SA1100_SSP
depends on SA1100_JORNADA720
+ select SA1100_SSP
help
Say Y here if you have a HP Jornada 7xx handheld computer and you
want to access devices connected to the MCU. Those include the
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 4cacc2d..8ae100c 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -4,49 +4,49 @@
config ARCH_SH7367
bool "SH-Mobile G3 (SH7367)"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select CPU_V6
select SH_CLK_CPG
- select ARCH_WANT_OPTIONAL_GPIOLIB
config ARCH_SH7377
bool "SH-Mobile G4 (SH7377)"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select CPU_V7
select SH_CLK_CPG
- select ARCH_WANT_OPTIONAL_GPIOLIB
config ARCH_SH7372
bool "SH-Mobile AP4 (SH7372)"
- select CPU_V7
- select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_CPU_SUSPEND if PM || CPU_IDLE
+ select CPU_V7
+ select SH_CLK_CPG
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
- select CPU_V7
- select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
+ select CPU_V7
select I2C
+ select SH_CLK_CPG
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select CPU_V7
select SH_CLK_CPG
- select ARCH_WANT_OPTIONAL_GPIOLIB
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_GIC
select CPU_V7
select SH_CLK_CPG
- select ARM_GIC
- select ARCH_WANT_OPTIONAL_GPIOLIB
config ARCH_EMEV2
bool "Emma Mobile EV2"
- select CPU_V7
- select ARM_GIC
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_GIC
+ select CPU_V7
comment "SH-Mobile Board Type"
@@ -65,9 +65,9 @@
bool "AP4EVB board"
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SH_LCD_MIPI_DSI
select SND_SOC_AK4642 if SND_SIMPLE_CARD
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
choice
prompt "AP4EVB LCD panel selection"
@@ -84,37 +84,37 @@
config MACH_AG5EVM
bool "AG5EVM board"
- select ARCH_REQUIRE_GPIOLIB
- select SH_LCD_MIPI_DSI
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on ARCH_SH73A0
+ select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select SH_LCD_MIPI_DSI
config MACH_MACKEREL
bool "mackerel board"
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
- select SND_SOC_AK4642 if SND_SIMPLE_CARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select SND_SOC_AK4642 if SND_SIMPLE_CARD
config MACH_KOTA2
bool "KOTA2 board"
+ depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on ARCH_SH73A0
config MACH_BONITO
bool "bonito board"
+ depends on ARCH_R8A7740
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
- depends on ARCH_R8A7740
config MACH_ARMADILLO800EVA
bool "Armadillo-800 EVA board"
depends on ARCH_R8A7740
select ARCH_REQUIRE_GPIOLIB
- select USE_OF
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_WM8978 if SND_SIMPLE_CARD
+ select USE_OF
config MACH_MARZEN
bool "MARZEN board"
@@ -125,16 +125,16 @@
config MACH_KZM9D
bool "KZM9D board"
depends on ARCH_EMEV2
- select USE_OF
select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select USE_OF
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
- select USE_OF
- select SND_SOC_AK4642 if SND_SIMPLE_CARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select SND_SOC_AK4642 if SND_SIMPLE_CARD
+ select USE_OF
comment "SH-Mobile System Configuration"
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 11680c5..9ff6f6e 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -4,42 +4,42 @@
config ARCH_TEGRA_2x_SOC
bool "Enable support for Tegra20 family"
- select CPU_V7
- select ARM_GIC
select ARCH_REQUIRE_GPIOLIB
- select PINCTRL
- select PINCTRL_TEGRA20
- select USB_ARCH_HAS_EHCI if USB_SUPPORT
- select USB_ULPI if USB
- select USB_ULPI_VIEWPORT if USB_SUPPORT
select ARM_ERRATA_720789
select ARM_ERRATA_742230
select ARM_ERRATA_751472
select ARM_ERRATA_754327
select ARM_ERRATA_764369 if SMP
+ select ARM_GIC
+ select CPU_FREQ_TABLE if CPU_FREQ
+ select CPU_V7
+ select PINCTRL
+ select PINCTRL_TEGRA20
select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
- select CPU_FREQ_TABLE if CPU_FREQ
+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
+ select USB_ULPI if USB
+ select USB_ULPI_VIEWPORT if USB_SUPPORT
help
Support for NVIDIA Tegra AP20 and T20 processors, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
config ARCH_TEGRA_3x_SOC
bool "Enable support for Tegra30 family"
- select CPU_V7
- select ARM_GIC
select ARCH_REQUIRE_GPIOLIB
- select PINCTRL
- select PINCTRL_TEGRA30
- select USB_ARCH_HAS_EHCI if USB_SUPPORT
- select USB_ULPI if USB
- select USB_ULPI_VIEWPORT if USB_SUPPORT
select ARM_ERRATA_743622
select ARM_ERRATA_751472
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
- select PL310_ERRATA_769419 if CACHE_L2X0
+ select ARM_GIC
select CPU_FREQ_TABLE if CPU_FREQ
+ select CPU_V7
+ select PINCTRL
+ select PINCTRL_TEGRA30
+ select PL310_ERRATA_769419 if CACHE_L2X0
+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
+ select USB_ULPI if USB
+ select USB_ULPI_VIEWPORT if USB_SUPPORT
help
Support for NVIDIA Tegra T30 processor family, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index f7e12ed..1f59764 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -7,8 +7,8 @@
config MACH_U300
bool "U300"
select PINCTRL
- select PINCTRL_U300
select PINCTRL_COH901
+ select PINCTRL_U300
comment "ST-Ericsson U300/U335 Feature Selections"
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 5848206..e8c3f0d 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -3,33 +3,33 @@
config UX500_SOC_COMMON
bool
default y
- select ARM_GIC
- select HAS_MTU
- select PL310_ERRATA_753970 if CACHE_PL310
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
+ select ARM_GIC
select CACHE_L2X0
+ select COMMON_CLK
+ select HAS_MTU
select PINCTRL
select PINCTRL_NOMADIK
- select COMMON_CLK
+ select PL310_ERRATA_753970 if CACHE_PL310
config UX500_SOC_DB8500
bool
+ select CPU_FREQ_TABLE if CPU_FREQ
select MFD_DB8500_PRCMU
+ select PINCTRL_DB8500
select REGULATOR
select REGULATOR_DB8500_PRCMU
- select CPU_FREQ_TABLE if CPU_FREQ
- select PINCTRL_DB8500
menu "Ux500 target platform (boards)"
config MACH_MOP500
bool "U8500 Development platform, MOP500 versions"
- select UX500_SOC_DB8500
select I2C
select I2C_NOMADIK
- select SOC_BUS
select REGULATOR_FIXED_VOLTAGE
+ select SOC_BUS
+ select UX500_SOC_DB8500
help
Include support for the MOP500 development platform.
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index c1f38f6..63d8e9f 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -3,9 +3,9 @@
config ARCH_VERSATILE_PB
bool "Support Versatile Platform Baseboard for ARM926EJ-S"
+ default y
select CPU_ARM926T
select MIGHT_HAVE_PCI
- default y
help
Include support for the ARM(R) Versatile Platform Baseboard
for the ARM926EJ-S.
@@ -19,8 +19,8 @@
config MACH_VERSATILE_DT
bool "Support Versatile platform from device tree"
- select USE_OF
select CPU_ARM926T
+ select USE_OF
help
Include support for the ARM(R) Versatile/PB platform,
using the device tree for discovery
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c9a4963..94186b6 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -10,8 +10,8 @@
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4
+ select CPU_PABRT_LEGACY
help
A 32-bit RISC microprocessor based on the ARM7 processor core
which has no memory control unit and cache.
@@ -24,11 +24,11 @@
bool "Support ARM720T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_LV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WT if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WT if MMU
help
A 32-bit RISC processor with 8kByte Cache, Write Buffer and
@@ -43,9 +43,9 @@
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V3 # although the core is v4t
select CPU_CP15_MPU
+ select CPU_PABRT_LEGACY
help
A 32-bit RISC processor with 8KB cache or 4KB variants,
write buffer and MPU(Protection Unit) built around
@@ -60,8 +60,8 @@
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4
+ select CPU_PABRT_LEGACY
help
A 32-bit RISC microprocessor based on the ARM9 processor core
which has no memory control unit and cache.
@@ -74,11 +74,11 @@
bool "Support ARM920T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_EV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM920T is licensed to be produced by numerous vendors,
@@ -92,11 +92,11 @@
bool "Support ARM922T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_EV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM922T is a version of the ARM920T, but with smaller
@@ -111,11 +111,11 @@
bool "Support ARM925T processor" if ARCH_OMAP1
select CPU_32v4T
select CPU_ABRT_EV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM925T is a mix between the ARM920T and ARM926T, but with
@@ -130,10 +130,10 @@
bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
select CPU_32v5
select CPU_ABRT_EV5TJ
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
This is a variant of the ARM920. It has slightly different
@@ -148,11 +148,11 @@
bool
select CPU_32v4
select CPU_ABRT_EV4
- select CPU_PABRT_LEGACY
- select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_CACHE_FA
+ select CPU_CACHE_VIVT
select CPU_COPY_FA if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_FA if MMU
help
The FA526 is a version of the ARMv4 compatible processor with
@@ -167,9 +167,9 @@
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MPU
+ select CPU_PABRT_LEGACY
help
ARM940T is a member of the ARM9TDMI family of general-
purpose microprocessors with MPU and separate 4KB
@@ -185,9 +185,9 @@
depends on !MMU
select CPU_32v5
select CPU_ABRT_NOMMU
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MPU
+ select CPU_PABRT_LEGACY
help
ARM946E-S is a member of the ARM9E-S family of high-
performance, 32-bit system-on-chip processor solutions.
@@ -201,11 +201,11 @@
bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM1020 is the 32K cached version of the ARM10 processor,
@@ -217,25 +217,25 @@
# ARM1020E - needs validating
config CPU_ARM1020E
bool "Support ARM1020E processor" if ARCH_INTEGRATOR
+ depends on n
select CPU_32v5
select CPU_ABRT_EV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
- depends on n
# ARM1022E
config CPU_ARM1022
bool "Support ARM1022E processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM1022E is an implementation of the ARMv5TE architecture
@@ -250,10 +250,10 @@
bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
@@ -268,11 +268,11 @@
select CPU_32v3 if ARCH_RPC
select CPU_32v4 if !ARCH_RPC
select CPU_ABRT_EV4
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WB if MMU
help
The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
@@ -288,10 +288,10 @@
bool
select CPU_32v4
select CPU_ABRT_EV4
- select CPU_PABRT_LEGACY
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WB if MMU
# XScale
@@ -299,9 +299,9 @@
bool
select CPU_32v5
select CPU_ABRT_EV5T
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
# XScale Core Version 3
@@ -309,9 +309,9 @@
bool
select CPU_32v5
select CPU_ABRT_EV5T
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
select IO_36
@@ -320,21 +320,21 @@
bool
select CPU_32v5
select CPU_ABRT_EV5T
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
- select CPU_TLB_V4WBI if MMU
select CPU_COPY_V4WB if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
+ select CPU_TLB_V4WBI if MMU
# Feroceon
config CPU_FEROCEON
bool
select CPU_32v5
select CPU_ABRT_EV5T
- select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
- select CPU_CP15_MMU
select CPU_COPY_FEROCEON if MMU
+ select CPU_CP15_MMU
+ select CPU_PABRT_LEGACY
select CPU_TLB_FEROCEON if MMU
config CPU_FEROCEON_OLD_ID
@@ -349,20 +349,20 @@
# Marvell PJ4
config CPU_PJ4
bool
- select CPU_V7
select ARM_THUMBEE
+ select CPU_V7
# ARMv6
config CPU_V6
bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
select CPU_32v6
select CPU_ABRT_EV6
- select CPU_PABRT_V6
select CPU_CACHE_V6
select CPU_CACHE_VIPT
+ select CPU_COPY_V6 if MMU
select CPU_CP15_MMU
select CPU_HAS_ASID if MMU
- select CPU_COPY_V6 if MMU
+ select CPU_PABRT_V6
select CPU_TLB_V6 if MMU
# ARMv6k
@@ -371,12 +371,12 @@
select CPU_32v6
select CPU_32v6K
select CPU_ABRT_EV6
- select CPU_PABRT_V6
select CPU_CACHE_V6
select CPU_CACHE_VIPT
+ select CPU_COPY_V6 if MMU
select CPU_CP15_MMU
select CPU_HAS_ASID if MMU
- select CPU_COPY_V6 if MMU
+ select CPU_PABRT_V6
select CPU_TLB_V6 if MMU
# ARMv7
@@ -385,44 +385,44 @@
select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
- select CPU_PABRT_V7
select CPU_CACHE_V7
select CPU_CACHE_VIPT
+ select CPU_COPY_V6 if MMU
select CPU_CP15_MMU
select CPU_HAS_ASID if MMU
- select CPU_COPY_V6 if MMU
+ select CPU_PABRT_V7
select CPU_TLB_V7 if MMU
# Figure out what processor architecture version we should be using.
# This defines the compiler instruction set which depends on the machine type.
config CPU_32v3
bool
- select TLS_REG_EMUL if SMP || !MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select CPU_USE_DOMAINS if MMU
+ select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select TLS_REG_EMUL if SMP || !MMU
config CPU_32v4
bool
- select TLS_REG_EMUL if SMP || !MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select CPU_USE_DOMAINS if MMU
+ select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select TLS_REG_EMUL if SMP || !MMU
config CPU_32v4T
bool
- select TLS_REG_EMUL if SMP || !MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select CPU_USE_DOMAINS if MMU
+ select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select TLS_REG_EMUL if SMP || !MMU
config CPU_32v5
bool
- select TLS_REG_EMUL if SMP || !MMU
- select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select CPU_USE_DOMAINS if MMU
+ select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select TLS_REG_EMUL if SMP || !MMU
config CPU_32v6
bool
- select TLS_REG_EMUL if !CPU_32v6K && !MMU
select CPU_USE_DOMAINS if CPU_V6 && MMU
+ select TLS_REG_EMUL if !CPU_32v6K && !MMU
config CPU_32v6K
bool
@@ -644,8 +644,8 @@
config SWP_EMULATE
bool "Emulate SWP/SWPB instructions"
depends on !CPU_USE_DOMAINS && CPU_V7
- select HAVE_PROC_CPU if PROC_FS
default y if SMP
+ select HAVE_PROC_CPU if PROC_FS
help
ARMv6 architecture deprecates use of the SWP/SWPB instructions.
ARMv7 multiprocessing extensions introduce the ability to disable
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index baf9064..88e1e2e 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -10,16 +10,16 @@
config ARCH_IMX_V4_V5
bool "i.MX1, i.MX21, i.MX25, i.MX27"
- select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR if !ZBOOT_ROM
help
This enables support for systems based on the Freescale i.MX ARMv4
and ARMv5 SoCs
config ARCH_IMX_V6_V7
bool "i.MX3, i.MX5, i.MX6"
- select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR if !ZBOOT_ROM
select MIGHT_HAVE_CACHE_L2X0
help
This enables support for systems based on the Freescale i.MX3, i.MX5
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index 6b46cee..a35d984 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -3,8 +3,8 @@
default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
config IMX_HAVE_PLATFORM_FLEXCAN
- select HAVE_CAN_FLEXCAN if CAN
bool
+ select HAVE_CAN_FLEXCAN if CAN
config IMX_HAVE_PLATFORM_FSL_USB2_UDC
bool
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index 4c48c8b..19f55ca 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -5,8 +5,8 @@
config PLAT_NOMADIK
bool
depends on ARCH_NOMADIK || ARCH_U8500
- select CLKSRC_MMIO
default y
+ select CLKSRC_MMIO
help
Common platform code for Nomadik and other ST-Ericsson
platforms.
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index c9d1c36..7cd56ed 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -14,10 +14,10 @@
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
- select IRQ_DOMAIN
select HAVE_IDE
- select NEED_MACH_MEMORY_H
+ select IRQ_DOMAIN
select NEED_MACH_IO_H if PCCARD
+ select NEED_MACH_MEMORY_H
help
"Systems based on omap7xx, omap15xx or omap16xx"
@@ -25,10 +25,10 @@
bool "TI OMAP2/3/4"
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
- select SPARSE_IRQ
select OMAP_DM_TIMER
- select USE_OF
select PROC_DEVICETREE if PROC_FS
+ select SPARSE_IRQ
+ select USE_OF
help
"Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
@@ -43,8 +43,8 @@
config OMAP_DEBUG_LEDS
def_bool y if NEW_LEDS
- select LEDS_CLASS
depends on OMAP_DEBUG_DEVICES
+ select LEDS_CLASS
config POWER_AVS_OMAP
bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 21bf6ad..eef3b6a 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -6,8 +6,8 @@
bool
depends on ARCH_S3C24XX
default y
- select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
+ select NO_IOPORT
select S3C_DEV_NAND
help
Base platform code for any Samsung S3C24XX device
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 9c3b90c..59401e1 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -7,9 +7,9 @@
config PLAT_SAMSUNG
bool
depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
- select NO_IOPORT
- select GENERIC_IRQ_CHIP
default y
+ select GENERIC_IRQ_CHIP
+ select NO_IOPORT
help
Base platform code for all Samsung SoC based systems
@@ -17,16 +17,16 @@
bool
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
default y
- select ARM_VIC if !ARCH_EXYNOS
+ select ARCH_REQUIRE_GPIOLIB
select ARM_GIC if ARCH_EXYNOS
+ select ARM_VIC if !ARCH_EXYNOS
select GIC_NON_BANKED if ARCH_EXYNOS4
select NO_IOPORT
- select ARCH_REQUIRE_GPIOLIB
+ select PLAT_SAMSUNG
select S3C_GPIO_TRACK
select S5P_GPIO_DRVSTR
- select SAMSUNG_GPIOLIB_4BIT
- select PLAT_SAMSUNG
select SAMSUNG_CLKSRC
+ select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_IRQ_VIC_TIMER
help
Base platform code for Samsung's S5P series SoC.
@@ -423,10 +423,10 @@
config SAMSUNG_DMADEV
bool
+ select ARM_AMBA
select DMADEVICES
select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
CPU_S5P6450 || CPU_S5P6440)
- select ARM_AMBA
help
Use DMA device engine for PL330 DMAC.
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 4404f82..f8db7b2 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -12,10 +12,10 @@
bool "ST SPEAr13xx with Device Tree"
select ARM_GIC
select CPU_V7
- select USE_OF
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
+ select USE_OF
help
Supports for ARM's SPEAR13XX family
@@ -23,8 +23,8 @@
bool "ST SPEAr3xx with Device Tree"
select ARM_VIC
select CPU_ARM926T
- select USE_OF
select PINCTRL
+ select USE_OF
help
Supports for ARM's SPEAR3XX family
