/*
 * NXP Wireless LAN device driver: major functions
 *
 * Copyright 2011-2020 NXP
 *
 * This software file (the "File") is distributed by NXP
 * under the terms of the GNU General Public License Version 2, June 1991
 * (the "License").  You may use, redistribute and/or modify this File in
 * accordance with the terms and conditions of the License, a copy of which
 * is available by writing to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
 *
 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
 * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
 * this warranty disclaimer.
 */

#include <linux/suspend.h>

#include "main.h"
#include "wmm.h"
#include "cfg80211.h"
#include "11n.h"

#define VERSION	"1.0"
#define MFG_FIRMWARE	"mwifiex_mfg.bin"

static unsigned int debug_mask = MWIFIEX_DEFAULT_DEBUG_MASK;
module_param(debug_mask, uint, 0);
MODULE_PARM_DESC(debug_mask, "bitmap for debug flags");

const char driver_version[] = "mwifiex " VERSION " (%s) ";
static char *cal_data_cfg;
module_param(cal_data_cfg, charp, 0);

static unsigned short driver_mode;
module_param(driver_mode, ushort, 0);
MODULE_PARM_DESC(driver_mode,
		 "station=0x1(default), ap-sta=0x3, station-p2p=0x5, ap-sta-p2p=0x7");

bool mfg_mode;
module_param(mfg_mode, bool, 0);
MODULE_PARM_DESC(mfg_mode, "manufacturing mode enable:1, disable:0");

bool aggr_ctrl;
module_param(aggr_ctrl, bool, 0000);
MODULE_PARM_DESC(aggr_ctrl, "usb tx aggregation enable:1, disable:0");

const u16 mwifiex_1d_to_wmm_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };

/*
 * This function registers the device and performs all the necessary
 * initializations.
 *
 * The following initialization operations are performed -
 *      - Allocate adapter structure
 *      - Save interface specific operations table in adapter
 *      - Call interface specific initialization routine
 *      - Allocate private structures
 *      - Set default adapter structure parameters
 *      - Initialize locks
 *
 * In case of any errors during inittialization, this function also ensures
 * proper cleanup before exiting.
 */
static int mwifiex_register(void *card, struct device *dev,
			    struct mwifiex_if_ops *if_ops, void **padapter)
{
	struct mwifiex_adapter *adapter;
	int i;

	adapter = kzalloc(sizeof(struct mwifiex_adapter), GFP_KERNEL);
	if (!adapter)
		return -ENOMEM;

	*padapter = adapter;
	adapter->dev = dev;
	adapter->card = card;

	/* Save interface specific operations in adapter */
	memmove(&adapter->if_ops, if_ops, sizeof(struct mwifiex_if_ops));
	adapter->debug_mask = debug_mask;

	/* card specific initialization has been deferred until now .. */
	if (adapter->if_ops.init_if)
		if (adapter->if_ops.init_if(adapter))
			goto error;

	adapter->priv_num = 0;

	for (i = 0; i < MWIFIEX_MAX_BSS_NUM; i++) {
		/* Allocate memory for private structure */
		adapter->priv[i] =
			kzalloc(sizeof(struct mwifiex_private), GFP_KERNEL);
		if (!adapter->priv[i])
			goto error;

		adapter->priv[i]->adapter = adapter;
		adapter->priv_num++;
	}
	mwifiex_init_lock_list(adapter);

	timer_setup(&adapter->cmd_timer, mwifiex_cmd_timeout_func, 0);

	return 0;

error:
	mwifiex_dbg(adapter, ERROR,
		    "info: leave mwifiex_register with error\n");

	for (i = 0; i < adapter->priv_num; i++)
		kfree(adapter->priv[i]);

	kfree(adapter);

	return -1;
}

/*
 * This function unregisters the device and performs all the necessary
 * cleanups.
 *
 * The following cleanup operations are performed -
 *      - Free the timers
 *      - Free beacon buffers
 *      - Free private structures
 *      - Free adapter structure
 */
static int mwifiex_unregister(struct mwifiex_adapter *adapter)
{
	s32 i;

	if (adapter->if_ops.cleanup_if)
		adapter->if_ops.cleanup_if(adapter);

	del_timer_sync(&adapter->cmd_timer);

	/* Free private structures */
	for (i = 0; i < adapter->priv_num; i++) {
		if (adapter->priv[i]) {
			mwifiex_free_curr_bcn(adapter->priv[i]);
			kfree(adapter->priv[i]);
		}
	}

	if (adapter->nd_info) {
		for (i = 0 ; i < adapter->nd_info->n_matches ; i++)
			kfree(adapter->nd_info->matches[i]);
		kfree(adapter->nd_info);
		adapter->nd_info = NULL;
	}

	kfree(adapter->regd);

	kfree(adapter);
	return 0;
}

void mwifiex_queue_main_work(struct mwifiex_adapter *adapter)
{
	unsigned long flags;

	spin_lock_irqsave(&adapter->main_proc_lock, flags);
	if (adapter->mwifiex_processing) {
		adapter->more_task_flag = true;
		spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
	} else {
		spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
		queue_work(adapter->workqueue, &adapter->main_work);
	}
}
EXPORT_SYMBOL_GPL(mwifiex_queue_main_work);

static void mwifiex_queue_rx_work(struct mwifiex_adapter *adapter)
{
	spin_lock_bh(&adapter->rx_proc_lock);
	if (adapter->rx_processing) {
		spin_unlock_bh(&adapter->rx_proc_lock);
	} else {
		spin_unlock_bh(&adapter->rx_proc_lock);
		queue_work(adapter->rx_workqueue, &adapter->rx_work);
	}
}

static int mwifiex_process_rx(struct mwifiex_adapter *adapter)
{
	struct sk_buff *skb;
	struct mwifiex_rxinfo *rx_info;

	spin_lock_bh(&adapter->rx_proc_lock);
	if (adapter->rx_processing || adapter->rx_locked) {
		spin_unlock_bh(&adapter->rx_proc_lock);
		goto exit_rx_proc;
	} else {
		adapter->rx_processing = true;
		spin_unlock_bh(&adapter->rx_proc_lock);
	}

	/* Check for Rx data */
	while ((skb = skb_dequeue(&adapter->rx_data_q))) {
		atomic_dec(&adapter->rx_pending);
		if ((adapter->delay_main_work ||
		     adapter->iface_type == MWIFIEX_USB) &&
		    (atomic_read(&adapter->rx_pending) < LOW_RX_PENDING)) {
			if (adapter->if_ops.submit_rem_rx_urbs)
				adapter->if_ops.submit_rem_rx_urbs(adapter);
			adapter->delay_main_work = false;
			mwifiex_queue_main_work(adapter);
		}
		rx_info = MWIFIEX_SKB_RXCB(skb);
		if (rx_info->buf_type == MWIFIEX_TYPE_AGGR_DATA) {
			if (adapter->if_ops.deaggr_pkt)
				adapter->if_ops.deaggr_pkt(adapter, skb);
			dev_kfree_skb_any(skb);
		} else {
			mwifiex_handle_rx_packet(adapter, skb);
		}
	}
	spin_lock_bh(&adapter->rx_proc_lock);
	adapter->rx_processing = false;
	spin_unlock_bh(&adapter->rx_proc_lock);

exit_rx_proc:
	return 0;
}

/*
 * The main process.
 *
 * This function is the main procedure of the driver and handles various driver
 * operations. It runs in a loop and provides the core functionalities.
 *
 * The main responsibilities of this function are -
 *      - Ensure concurrency control
 *      - Handle pending interrupts and call interrupt handlers
 *      - Wake up the card if required
 *      - Handle command responses and call response handlers
 *      - Handle events and call event handlers
 *      - Execute pending commands
 *      - Transmit pending data packets
 */
int mwifiex_main_process(struct mwifiex_adapter *adapter)
{
	int ret = 0;
	unsigned long flags;

	spin_lock_irqsave(&adapter->main_proc_lock, flags);

	/* Check if already processing */
	if (adapter->mwifiex_processing || adapter->main_locked) {
		adapter->more_task_flag = true;
		spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
		return 0;
	} else {
		adapter->mwifiex_processing = true;
		spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
	}
process_start:
	do {
		if (adapter->hw_status == MWIFIEX_HW_STATUS_NOT_READY)
			break;

		/* For non-USB interfaces, If we process interrupts first, it
		 * would increase RX pending even further. Avoid this by
		 * checking if rx_pending has crossed high threshold and
		 * schedule rx work queue and then process interrupts.
		 * For USB interface, there are no interrupts. We already have
		 * HIGH_RX_PENDING check in usb.c
		 */
		if (atomic_read(&adapter->rx_pending) >= HIGH_RX_PENDING &&
		    adapter->iface_type != MWIFIEX_USB) {
			adapter->delay_main_work = true;
			mwifiex_queue_rx_work(adapter);
			break;
		}

		/* Handle pending interrupt if any */
		if (adapter->int_status) {
			if (adapter->hs_activated)
				mwifiex_process_hs_config(adapter);
			if (adapter->if_ops.process_int_status)
				adapter->if_ops.process_int_status(adapter);
		}

		if (adapter->rx_work_enabled && adapter->data_received)
			mwifiex_queue_rx_work(adapter);

		/* Need to wake up the card ? */
		if ((adapter->ps_state == PS_STATE_SLEEP) &&
		    (adapter->pm_wakeup_card_req &&
		     !adapter->pm_wakeup_fw_try) &&
		    (is_command_pending(adapter) ||
		     !skb_queue_empty(&adapter->tx_data_q) ||
		     !mwifiex_bypass_txlist_empty(adapter) ||
		     !mwifiex_wmm_lists_empty(adapter))) {
			adapter->pm_wakeup_fw_try = true;
			mod_timer(&adapter->wakeup_timer, jiffies + (HZ*3));
			adapter->if_ops.wakeup(adapter);
			continue;
		}

		if (IS_CARD_RX_RCVD(adapter)) {
			adapter->data_received = false;
			adapter->pm_wakeup_fw_try = false;
			del_timer(&adapter->wakeup_timer);
			if (adapter->ps_state == PS_STATE_SLEEP)
				adapter->ps_state = PS_STATE_AWAKE;
		} else {
			/* We have tried to wakeup the card already */
			if (adapter->pm_wakeup_fw_try)
				break;
			if (adapter->ps_state == PS_STATE_PRE_SLEEP)
				mwifiex_check_ps_cond(adapter);

			if (adapter->ps_state != PS_STATE_AWAKE)
				break;
			if (adapter->tx_lock_flag) {
				if (adapter->iface_type == MWIFIEX_USB) {
					if (!adapter->usb_mc_setup)
						break;
				} else
					break;
			}

			if ((!adapter->scan_chan_gap_enabled &&
			     adapter->scan_processing) || adapter->data_sent ||
			     mwifiex_is_tdls_chan_switching
			     (mwifiex_get_priv(adapter,
					       MWIFIEX_BSS_ROLE_STA)) ||
			    (mwifiex_wmm_lists_empty(adapter) &&
			     mwifiex_bypass_txlist_empty(adapter) &&
			     skb_queue_empty(&adapter->tx_data_q))) {
				if (adapter->cmd_sent || adapter->curr_cmd ||
					!mwifiex_is_send_cmd_allowed
						(mwifiex_get_priv(adapter,
						MWIFIEX_BSS_ROLE_STA)) ||
				    (!is_command_pending(adapter)))
					break;
			}
		}

		/* Check for event */
		if (adapter->event_received) {
			adapter->event_received = false;
			mwifiex_process_event(adapter);
		}

		/* Check for Cmd Resp */
		if (adapter->cmd_resp_received) {
			adapter->cmd_resp_received = false;
			mwifiex_process_cmdresp(adapter);

			/* call mwifiex back when init_fw is done */
			if (adapter->hw_status == MWIFIEX_HW_STATUS_INIT_DONE) {
				adapter->hw_status = MWIFIEX_HW_STATUS_READY;
				mwifiex_init_fw_complete(adapter);
			}
		}

		/* Check if we need to confirm Sleep Request
		   received previously */
		if (adapter->ps_state == PS_STATE_PRE_SLEEP)
			mwifiex_check_ps_cond(adapter);

		/* * The ps_state may have been changed during processing of
		 * Sleep Request event.
		 */
		if ((adapter->ps_state == PS_STATE_SLEEP) ||
		    (adapter->ps_state == PS_STATE_PRE_SLEEP) ||
		    (adapter->ps_state == PS_STATE_SLEEP_CFM)) {
			continue;
		}

		if (adapter->tx_lock_flag) {
			if (adapter->iface_type == MWIFIEX_USB) {
				if (!adapter->usb_mc_setup)
					continue;
			} else
				continue;
		}

		if (!adapter->cmd_sent && !adapter->curr_cmd &&
		    mwifiex_is_send_cmd_allowed
		    (mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA))) {
			if (mwifiex_exec_next_cmd(adapter) == -1) {
				ret = -1;
				break;
			}
		}

		/** If USB Multi channel setup ongoing,
		 *  wait for ready to tx data.
		 */
		if (adapter->iface_type == MWIFIEX_USB &&
		    adapter->usb_mc_setup)
			continue;

		if ((adapter->scan_chan_gap_enabled ||
		     !adapter->scan_processing) &&
		    !adapter->data_sent &&
		    !skb_queue_empty(&adapter->tx_data_q)) {
			mwifiex_process_tx_queue(adapter);
			if (adapter->hs_activated) {
				clear_bit(MWIFIEX_IS_HS_CONFIGURED,
					  &adapter->work_flags);
				mwifiex_hs_activated_event
					(mwifiex_get_priv
					(adapter, MWIFIEX_BSS_ROLE_ANY),
					false);
			}
		}

		if ((adapter->scan_chan_gap_enabled ||
		     !adapter->scan_processing) &&
		    !adapter->data_sent &&
		    !mwifiex_bypass_txlist_empty(adapter) &&
		    !mwifiex_is_tdls_chan_switching
			(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA))) {
			mwifiex_process_bypass_tx(adapter);
			if (adapter->hs_activated) {
				clear_bit(MWIFIEX_IS_HS_CONFIGURED,
					  &adapter->work_flags);
				mwifiex_hs_activated_event
					(mwifiex_get_priv
					 (adapter, MWIFIEX_BSS_ROLE_ANY),
					 false);
			}
		}

		if ((adapter->scan_chan_gap_enabled ||
		     !adapter->scan_processing) &&
		    !adapter->data_sent && !mwifiex_wmm_lists_empty(adapter) &&
		    !mwifiex_is_tdls_chan_switching
			(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA))) {
			mwifiex_wmm_process_tx(adapter);
			if (adapter->hs_activated) {
				clear_bit(MWIFIEX_IS_HS_CONFIGURED,
					  &adapter->work_flags);
				mwifiex_hs_activated_event
					(mwifiex_get_priv
					 (adapter, MWIFIEX_BSS_ROLE_ANY),
					 false);
			}
		}

		if (adapter->delay_null_pkt && !adapter->cmd_sent &&
		    !adapter->curr_cmd && !is_command_pending(adapter) &&
		    (mwifiex_wmm_lists_empty(adapter) &&
		     mwifiex_bypass_txlist_empty(adapter) &&
		     skb_queue_empty(&adapter->tx_data_q))) {
			if (!mwifiex_send_null_packet
			    (mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA),
			     MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET |
			     MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET)) {
				adapter->delay_null_pkt = false;
				adapter->ps_state = PS_STATE_SLEEP;
			}
			break;
		}
	} while (true);

	spin_lock_irqsave(&adapter->main_proc_lock, flags);
	if (adapter->more_task_flag) {
		adapter->more_task_flag = false;
		spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
		goto process_start;
	}
	adapter->mwifiex_processing = false;
	spin_unlock_irqrestore(&adapter->main_proc_lock, flags);

	return ret;
}
EXPORT_SYMBOL_GPL(mwifiex_main_process);

/*
 * This function frees the adapter structure.
 *
 * Additionally, this closes the netlink socket, frees the timers
 * and private structures.
 */
static void mwifiex_free_adapter(struct mwifiex_adapter *adapter)
{
	if (!adapter) {
		pr_err("%s: adapter is NULL\n", __func__);
		return;
	}

	mwifiex_unregister(adapter);
	pr_debug("info: %s: free adapter\n", __func__);
}

/*
 * This function cancels all works in the queue and destroys
 * the main workqueue.
 */
static void mwifiex_terminate_workqueue(struct mwifiex_adapter *adapter)
{
	if (adapter->workqueue) {
		flush_workqueue(adapter->workqueue);
		destroy_workqueue(adapter->workqueue);
		adapter->workqueue = NULL;
	}

	if (adapter->rx_workqueue) {
		flush_workqueue(adapter->rx_workqueue);
		destroy_workqueue(adapter->rx_workqueue);
		adapter->rx_workqueue = NULL;
	}
}

/*
 * This function gets firmware and initializes it.
 *
 * The main initialization steps followed are -
 *      - Download the correct firmware to card
 *      - Issue the init commands to firmware
 */
static int _mwifiex_fw_dpc(const struct firmware *firmware, void *context)
{
	int ret;
	char fmt[64];
	struct mwifiex_adapter *adapter = context;
	struct mwifiex_fw_image fw;
	bool init_failed = false;
	struct wireless_dev *wdev;
	struct completion *fw_done = adapter->fw_done;

	if (!firmware) {
		mwifiex_dbg(adapter, ERROR,
			    "Failed to get firmware %s\n", adapter->fw_name);
		goto err_dnld_fw;
	}

	memset(&fw, 0, sizeof(struct mwifiex_fw_image));
	adapter->firmware = firmware;
	fw.fw_buf = (u8 *) adapter->firmware->data;
	fw.fw_len = adapter->firmware->size;

	if (adapter->if_ops.dnld_fw) {
		ret = adapter->if_ops.dnld_fw(adapter, &fw);
	} else {
		ret = mwifiex_dnld_fw(adapter, &fw);
	}

	if (ret == -1)
		goto err_dnld_fw;

	mwifiex_dbg(adapter, MSG, "WLAN FW is active\n");

	if (cal_data_cfg) {
		if ((request_firmware(&adapter->cal_data, cal_data_cfg,
				      adapter->dev)) < 0)
			mwifiex_dbg(adapter, ERROR,
				    "Cal data request_firmware() failed\n");
	}

	/* enable host interrupt after fw dnld is successful */
	if (adapter->if_ops.enable_int) {
		if (adapter->if_ops.enable_int(adapter))
			goto err_dnld_fw;
	}

	adapter->init_wait_q_woken = false;
	ret = mwifiex_init_fw(adapter);
	if (ret == -1) {
		goto err_init_fw;
	} else if (!ret) {
		adapter->hw_status = MWIFIEX_HW_STATUS_READY;
		goto done;
	}
	/* Wait for mwifiex_init to complete */
	if (!adapter->mfg_mode) {
		wait_event_interruptible(adapter->init_wait_q,
					 adapter->init_wait_q_woken);
		if (adapter->hw_status != MWIFIEX_HW_STATUS_READY)
			goto err_init_fw;
	}

	if (!adapter->wiphy) {
		if (mwifiex_register_cfg80211(adapter)) {
			mwifiex_dbg(adapter, ERROR,
				    "cannot register with cfg80211\n");
			goto err_init_fw;
		}
	}

	if (mwifiex_init_channel_scan_gap(adapter)) {
		mwifiex_dbg(adapter, ERROR,
			    "could not init channel stats table\n");
		goto err_init_chan_scan;
	}

	if (driver_mode) {
		driver_mode &= MWIFIEX_DRIVER_MODE_BITMASK;
		driver_mode |= MWIFIEX_DRIVER_MODE_STA;
	}

	rtnl_lock();
	wiphy_lock(adapter->wiphy);
	/* Create station interface by default */
	wdev = mwifiex_add_virtual_intf(adapter->wiphy, "mlan%d", NET_NAME_ENUM,
					NL80211_IFTYPE_STATION, NULL);
	if (IS_ERR(wdev)) {
		mwifiex_dbg(adapter, ERROR,
			    "cannot create default STA interface\n");
		wiphy_unlock(adapter->wiphy);
		rtnl_unlock();
		goto err_add_intf;
	}

	if (driver_mode & MWIFIEX_DRIVER_MODE_UAP) {
		wdev = mwifiex_add_virtual_intf(adapter->wiphy, "uap%d", NET_NAME_ENUM,
						NL80211_IFTYPE_AP, NULL);
		if (IS_ERR(wdev)) {
			mwifiex_dbg(adapter, ERROR,
				    "cannot create AP interface\n");
			wiphy_unlock(adapter->wiphy);
			rtnl_unlock();
			goto err_add_intf;
		}
	}

	if (driver_mode & MWIFIEX_DRIVER_MODE_P2P) {
		wdev = mwifiex_add_virtual_intf(adapter->wiphy, "p2p%d", NET_NAME_ENUM,
						NL80211_IFTYPE_P2P_CLIENT, NULL);
		if (IS_ERR(wdev)) {
			mwifiex_dbg(adapter, ERROR,
				    "cannot create p2p client interface\n");
			wiphy_unlock(adapter->wiphy);
			rtnl_unlock();
			goto err_add_intf;
		}
	}
	wiphy_unlock(adapter->wiphy);
	rtnl_unlock();

	mwifiex_drv_get_driver_version(adapter, fmt, sizeof(fmt) - 1);
	mwifiex_dbg(adapter, MSG, "driver_version = %s\n", fmt);
	adapter->is_up = true;
	goto done;

err_add_intf:
	vfree(adapter->chan_stats);
err_init_chan_scan:
	wiphy_unregister(adapter->wiphy);
	wiphy_free(adapter->wiphy);
err_init_fw:
	if (adapter->if_ops.disable_int)
		adapter->if_ops.disable_int(adapter);
err_dnld_fw:
	mwifiex_dbg(adapter, ERROR,
		    "info: %s: unregister device\n", __func__);
	if (adapter->if_ops.unregister_dev)
		adapter->if_ops.unregister_dev(adapter);

	set_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags);
	mwifiex_terminate_workqueue(adapter);

	if (adapter->hw_status == MWIFIEX_HW_STATUS_READY) {
		pr_debug("info: %s: shutdown mwifiex\n", __func__);
		mwifiex_shutdown_drv(adapter);
		mwifiex_free_cmd_buffers(adapter);
	}

	init_failed = true;
done:
	if (adapter->cal_data) {
		release_firmware(adapter->cal_data);
		adapter->cal_data = NULL;
	}
	if (adapter->firmware) {
		release_firmware(adapter->firmware);
		adapter->firmware = NULL;
	}
	if (init_failed) {
		if (adapter->irq_wakeup >= 0)
			device_init_wakeup(adapter->dev, false);
		mwifiex_free_adapter(adapter);
	}
	/* Tell all current and future waiters we're finished */
	complete_all(fw_done);

	return init_failed ? -EIO : 0;
}

static void mwifiex_fw_dpc(const struct firmware *firmware, void *context)
{
	_mwifiex_fw_dpc(firmware, context);
}

/*
 * This function gets the firmware and (if called asynchronously) kicks off the
 * HW init when done.
 */
static int mwifiex_init_hw_fw(struct mwifiex_adapter *adapter,
			      bool req_fw_nowait)
{
	int ret;

	/* Override default firmware with manufacturing one if
	 * manufacturing mode is enabled
	 */
	if (mfg_mode) {
		if (strlcpy(adapter->fw_name, MFG_FIRMWARE,
			    sizeof(adapter->fw_name)) >=
			    sizeof(adapter->fw_name)) {
			pr_err("%s: fw_name too long!\n", __func__);
			return -1;
		}
	}

	if (req_fw_nowait) {
		ret = request_firmware_nowait(THIS_MODULE, 1, adapter->fw_name,
					      adapter->dev, GFP_KERNEL, adapter,
					      mwifiex_fw_dpc);
	} else {
		ret = request_firmware(&adapter->firmware,
				       adapter->fw_name,
				       adapter->dev);
	}

	if (ret < 0)
		mwifiex_dbg(adapter, ERROR, "request_firmware%s error %d\n",
			    req_fw_nowait ? "_nowait" : "", ret);
	return ret;
}

/*
 * CFG802.11 network device handler for open.
 *
 * Starts the data queue.
 */
static int
mwifiex_open(struct net_device *dev)
{
	netif_carrier_off(dev);

	return 0;
}

/*
 * CFG802.11 network device handler for close.
 */
static int
mwifiex_close(struct net_device *dev)
{
	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);

	if (priv->scan_request) {
		struct cfg80211_scan_info info = {
			.aborted = true,
		};

		mwifiex_dbg(priv->adapter, INFO,
			    "aborting scan on ndo_stop\n");
		cfg80211_scan_done(priv->scan_request, &info);
		priv->scan_request = NULL;
		priv->scan_aborting = true;
	}

	if (priv->sched_scanning) {
		mwifiex_dbg(priv->adapter, INFO,
			    "aborting bgscan on ndo_stop\n");
		mwifiex_stop_bg_scan(priv);
		cfg80211_sched_scan_stopped(priv->wdev.wiphy, 0);
	}

	return 0;
}

static bool
mwifiex_bypass_tx_queue(struct mwifiex_private *priv,
			struct sk_buff *skb)
{
	struct ethhdr *eth_hdr = (struct ethhdr *)skb->data;

	if (ntohs(eth_hdr->h_proto) == ETH_P_PAE ||
	    mwifiex_is_skb_mgmt_frame(skb) ||
	    (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA &&
	     ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
	     (ntohs(eth_hdr->h_proto) == ETH_P_TDLS))) {
		mwifiex_dbg(priv->adapter, DATA,
			    "bypass txqueue; eth type %#x, mgmt %d\n",
			     ntohs(eth_hdr->h_proto),
			     mwifiex_is_skb_mgmt_frame(skb));
		return true;
	}

	return false;
}
/*
 * Add buffer into wmm tx queue and queue work to transmit it.
 */
int mwifiex_queue_tx_pkt(struct mwifiex_private *priv, struct sk_buff *skb)
{
	struct netdev_queue *txq;
	int index = mwifiex_1d_to_wmm_queue[skb->priority];

	if (atomic_inc_return(&priv->wmm_tx_pending[index]) >= MAX_TX_PENDING) {
		txq = netdev_get_tx_queue(priv->netdev, index);
		if (!netif_tx_queue_stopped(txq)) {
			netif_tx_stop_queue(txq);
			mwifiex_dbg(priv->adapter, DATA,
				    "stop queue: %d\n", index);
		}
	}

	if (mwifiex_bypass_tx_queue(priv, skb)) {
		atomic_inc(&priv->adapter->tx_pending);
		atomic_inc(&priv->adapter->bypass_tx_pending);
		mwifiex_wmm_add_buf_bypass_txqueue(priv, skb);
	 } else {
		atomic_inc(&priv->adapter->tx_pending);
		mwifiex_wmm_add_buf_txqueue(priv, skb);
	 }

	mwifiex_queue_main_work(priv->adapter);

	return 0;
}

struct sk_buff *
mwifiex_clone_skb_for_tx_status(struct mwifiex_private *priv,
				struct sk_buff *skb, u8 flag, u64 *cookie)
{
	struct sk_buff *orig_skb = skb;
	struct mwifiex_txinfo *tx_info, *orig_tx_info;

	skb = skb_clone(skb, GFP_ATOMIC);
	if (skb) {
		int id;

		spin_lock_bh(&priv->ack_status_lock);
		id = idr_alloc(&priv->ack_status_frames, orig_skb,
			       1, 0x10, GFP_ATOMIC);
		spin_unlock_bh(&priv->ack_status_lock);

		if (id >= 0) {
			tx_info = MWIFIEX_SKB_TXCB(skb);
			tx_info->ack_frame_id = id;
			tx_info->flags |= flag;
			orig_tx_info = MWIFIEX_SKB_TXCB(orig_skb);
			orig_tx_info->ack_frame_id = id;
			orig_tx_info->flags |= flag;

			if (flag == MWIFIEX_BUF_FLAG_ACTION_TX_STATUS && cookie)
				orig_tx_info->cookie = *cookie;

		} else if (skb_shared(skb)) {
			kfree_skb(orig_skb);
		} else {
			kfree_skb(skb);
			skb = orig_skb;
		}
	} else {
		/* couldn't clone -- lose tx status ... */
		skb = orig_skb;
	}

	return skb;
}

/*
 * CFG802.11 network device handler for data transmission.
 */
static netdev_tx_t
mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
	struct sk_buff *new_skb;
	struct mwifiex_txinfo *tx_info;
	bool multicast;

	mwifiex_dbg(priv->adapter, DATA,
		    "data: %lu BSS(%d-%d): Data <= kernel\n",
		    jiffies, priv->bss_type, priv->bss_num);

	if (test_bit(MWIFIEX_SURPRISE_REMOVED, &priv->adapter->work_flags)) {
		kfree_skb(skb);
		priv->stats.tx_dropped++;
		return 0;
	}
	if (!skb->len || (skb->len > ETH_FRAME_LEN)) {
		mwifiex_dbg(priv->adapter, ERROR,
			    "Tx: bad skb len %d\n", skb->len);
		kfree_skb(skb);
		priv->stats.tx_dropped++;
		return 0;
	}
	if (skb_headroom(skb) < MWIFIEX_MIN_DATA_HEADER_LEN) {
		mwifiex_dbg(priv->adapter, DATA,
			    "data: Tx: insufficient skb headroom %d\n",
			    skb_headroom(skb));
		/* Insufficient skb headroom - allocate a new skb */
		new_skb =
			skb_realloc_headroom(skb, MWIFIEX_MIN_DATA_HEADER_LEN);
		if (unlikely(!new_skb)) {
			mwifiex_dbg(priv->adapter, ERROR,
				    "Tx: cannot alloca new_skb\n");
			kfree_skb(skb);
			priv->stats.tx_dropped++;
			return 0;
		}
		kfree_skb(skb);
		skb = new_skb;
		mwifiex_dbg(priv->adapter, INFO,
			    "info: new skb headroomd %d\n",
			    skb_headroom(skb));
	}

	tx_info = MWIFIEX_SKB_TXCB(skb);
	memset(tx_info, 0, sizeof(*tx_info));
	tx_info->bss_num = priv->bss_num;
	tx_info->bss_type = priv->bss_type;
	tx_info->pkt_len = skb->len;

	multicast = is_multicast_ether_addr(skb->data);

	if (unlikely(!multicast && skb->sk &&
		     skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS &&
		     priv->adapter->fw_api_ver == MWIFIEX_FW_V15))
		skb = mwifiex_clone_skb_for_tx_status(priv,
						      skb,
					MWIFIEX_BUF_FLAG_EAPOL_TX_STATUS, NULL);

	/* Record the current time the packet was queued; used to
	 * determine the amount of time the packet was queued in
	 * the driver before it was sent to the firmware.
	 * The delay is then sent along with the packet to the
	 * firmware for aggregate delay calculation for stats and
	 * MSDU lifetime expiry.
	 */
	__net_timestamp(skb);

	if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
	    priv->bss_type == MWIFIEX_BSS_TYPE_STA &&
	    !ether_addr_equal_unaligned(priv->cfg_bssid, skb->data)) {
		if (priv->adapter->auto_tdls && priv->check_tdls_tx)
			mwifiex_tdls_check_tx(priv, skb);
	}

	mwifiex_queue_tx_pkt(priv, skb);

	return 0;
}

int mwifiex_set_mac_address(struct mwifiex_private *priv,
			    struct net_device *dev, bool external,
			    u8 *new_mac)
{
	int ret;
	u64 mac_addr, old_mac_addr;

	old_mac_addr = ether_addr_to_u64(priv->curr_addr);

	if (external) {
		mac_addr = ether_addr_to_u64(new_mac);
	} else {
		/* Internal mac address change */
		if (priv->bss_type == MWIFIEX_BSS_TYPE_ANY)
			return -EOPNOTSUPP;

		mac_addr = old_mac_addr;

		if (priv->bss_type == MWIFIEX_BSS_TYPE_P2P) {
			mac_addr |= BIT_ULL(MWIFIEX_MAC_LOCAL_ADMIN_BIT);
			mac_addr += priv->bss_num;
		} else if (priv->adapter->priv[0] != priv) {
			/* Set mac address based on bss_type/bss_num */
			mac_addr ^= BIT_ULL(priv->bss_type + 8);
			mac_addr += priv->bss_num;
		}
	}

	u64_to_ether_addr(mac_addr, priv->curr_addr);

	/* Send request to firmware */
	ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_MAC_ADDRESS,
			       HostCmd_ACT_GEN_SET, 0, NULL, true);

	if (ret) {
		u64_to_ether_addr(old_mac_addr, priv->curr_addr);
		mwifiex_dbg(priv->adapter, ERROR,
			    "set mac address failed: ret=%d\n", ret);
		return ret;
	}

	ether_addr_copy(dev->dev_addr, priv->curr_addr);
	return 0;
}

/* CFG802.11 network device handler for setting MAC address.
 */
static int
mwifiex_ndo_set_mac_address(struct net_device *dev, void *addr)
{
	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
	struct sockaddr *hw_addr = addr;

	return mwifiex_set_mac_address(priv, dev, true, hw_addr->sa_data);
}

/*
 * CFG802.11 network device handler for setting multicast list.
 */
static void mwifiex_set_multicast_list(struct net_device *dev)
{
	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
	struct mwifiex_multicast_list mcast_list;

	if (dev->flags & IFF_PROMISC) {
		mcast_list.mode = MWIFIEX_PROMISC_MODE;
	} else if (dev->flags & IFF_ALLMULTI ||
		   netdev_mc_count(dev) > MWIFIEX_MAX_MULTICAST_LIST_SIZE) {
		mcast_list.mode = MWIFIEX_ALL_MULTI_MODE;
	} else {
		mcast_list.mode = MWIFIEX_MULTICAST_MODE;
		mcast_list.num_multicast_addr =
			mwifiex_copy_mcast_addr(&mcast_list, dev);
	}
	mwifiex_request_set_multicast_list(priv, &mcast_list);
}

/*
 * CFG802.11 network device handler for transmission timeout.
 */
static void
mwifiex_tx_timeout(struct net_device *dev, unsigned int txqueue)
{
	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);

	priv->num_tx_timeout++;
	priv->tx_timeout_cnt++;
	mwifiex_dbg(priv->adapter, ERROR,
		    "%lu : Tx timeout(#%d), bss_type-num = %d-%d\n",
		    jiffies, priv->tx_timeout_cnt, priv->bss_type,
		    priv->bss_num);
	mwifiex_set_trans_start(dev);

	if (priv->tx_timeout_cnt > TX_TIMEOUT_THRESHOLD &&
	    priv->adapter->if_ops.card_reset) {
		mwifiex_dbg(priv->adapter, ERROR,
			    "tx_timeout_cnt exceeds threshold.\t"
			    "Triggering card reset!\n");
		priv->adapter->if_ops.card_reset(priv->adapter);
	}
}

void mwifiex_multi_chan_resync(struct mwifiex_adapter *adapter)
{
	struct usb_card_rec *card = adapter->card;
	struct mwifiex_private *priv;
	u16 tx_buf_size;
	int i, ret;

	card->mc_resync_flag = true;
	for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) {
		if (atomic_read(&card->port[i].tx_data_urb_pending)) {
			mwifiex_dbg(adapter, WARN, "pending data urb in sys\n");
			return;
		}
	}

	card->mc_resync_flag = false;
	tx_buf_size = 0xffff;
	priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
	ret = mwifiex_send_cmd(priv, HostCmd_CMD_RECONFIGURE_TX_BUFF,
			       HostCmd_ACT_GEN_SET, 0, &tx_buf_size, false);
	if (ret)
		mwifiex_dbg(adapter, ERROR,
			    "send reconfig tx buf size cmd err\n");
}
EXPORT_SYMBOL_GPL(mwifiex_multi_chan_resync);

void mwifiex_upload_device_dump(struct mwifiex_adapter *adapter)
{
	/* Dump all the memory data into single file, a userspace script will
	 * be used to split all the memory data to multiple files
	 */
	mwifiex_dbg(adapter, MSG,
		    "== mwifiex dump information to /sys/class/devcoredump start\n");
	dev_coredumpv(adapter->dev, adapter->devdump_data, adapter->devdump_len,
		      GFP_KERNEL);
	mwifiex_dbg(adapter, MSG,
		    "== mwifiex dump information to /sys/class/devcoredump end\n");

	/* Device dump data will be freed in device coredump release function
	 * after 5 min. Here reset adapter->devdump_data and ->devdump_len
	 * to avoid it been accidentally reused.
	 */
	adapter->devdump_data = NULL;
	adapter->devdump_len = 0;
}
EXPORT_SYMBOL_GPL(mwifiex_upload_device_dump);

void mwifiex_drv_info_dump(struct mwifiex_adapter *adapter)
{
	char *p;
	char drv_version[64];
	struct usb_card_rec *cardp;
	struct sdio_mmc_card *sdio_card;
	struct mwifiex_private *priv;
	int i, idx;
	struct netdev_queue *txq;
	struct mwifiex_debug_info *debug_info;

	mwifiex_dbg(adapter, MSG, "===mwifiex driverinfo dump start===\n");

	p = adapter->devdump_data;
	strcpy(p, "========Start dump driverinfo========\n");
	p += strlen("========Start dump driverinfo========\n");
	p += sprintf(p, "driver_name = " "\"mwifiex\"\n");

	mwifiex_drv_get_driver_version(adapter, drv_version,
				       sizeof(drv_version) - 1);
	p += sprintf(p, "driver_version = %s\n", drv_version);

	if (adapter->iface_type == MWIFIEX_USB) {
		cardp = (struct usb_card_rec *)adapter->card;
		p += sprintf(p, "tx_cmd_urb_pending = %d\n",
			     atomic_read(&cardp->tx_cmd_urb_pending));
		p += sprintf(p, "tx_data_urb_pending_port_0 = %d\n",
			     atomic_read(&cardp->port[0].tx_data_urb_pending));
		p += sprintf(p, "tx_data_urb_pending_port_1 = %d\n",
			     atomic_read(&cardp->port[1].tx_data_urb_pending));
		p += sprintf(p, "rx_cmd_urb_pending = %d\n",
			     atomic_read(&cardp->rx_cmd_urb_pending));
		p += sprintf(p, "rx_data_urb_pending = %d\n",
			     atomic_read(&cardp->rx_data_urb_pending));
	}

	p += sprintf(p, "tx_pending = %d\n",
		     atomic_read(&adapter->tx_pending));
	p += sprintf(p, "rx_pending = %d\n",
		     atomic_read(&adapter->rx_pending));

	if (adapter->iface_type == MWIFIEX_SDIO) {
		sdio_card = (struct sdio_mmc_card *)adapter->card;
		p += sprintf(p, "\nmp_rd_bitmap=0x%x curr_rd_port=0x%x\n",
			     sdio_card->mp_rd_bitmap, sdio_card->curr_rd_port);
		p += sprintf(p, "mp_wr_bitmap=0x%x curr_wr_port=0x%x\n",
			     sdio_card->mp_wr_bitmap, sdio_card->curr_wr_port);
	}

	for (i = 0; i < adapter->priv_num; i++) {
		if (!adapter->priv[i] || !adapter->priv[i]->netdev)
			continue;
		priv = adapter->priv[i];
		p += sprintf(p, "\n[interface  : \"%s\"]\n",
			     priv->netdev->name);
		p += sprintf(p, "wmm_tx_pending[0] = %d\n",
			     atomic_read(&priv->wmm_tx_pending[0]));
		p += sprintf(p, "wmm_tx_pending[1] = %d\n",
			     atomic_read(&priv->wmm_tx_pending[1]));
		p += sprintf(p, "wmm_tx_pending[2] = %d\n",
			     atomic_read(&priv->wmm_tx_pending[2]));
		p += sprintf(p, "wmm_tx_pending[3] = %d\n",
			     atomic_read(&priv->wmm_tx_pending[3]));
		p += sprintf(p, "media_state=\"%s\"\n", !priv->media_connected ?
			     "Disconnected" : "Connected");
		p += sprintf(p, "carrier %s\n", (netif_carrier_ok(priv->netdev)
			     ? "on" : "off"));
		for (idx = 0; idx < priv->netdev->num_tx_queues; idx++) {
			txq = netdev_get_tx_queue(priv->netdev, idx);
			p += sprintf(p, "tx queue %d:%s  ", idx,
				     netif_tx_queue_stopped(txq) ?
				     "stopped" : "started");
		}
		p += sprintf(p, "\n%s: num_tx_timeout = %d\n",
			     priv->netdev->name, priv->num_tx_timeout);
	}

	if (adapter->iface_type == MWIFIEX_SDIO ||
	    adapter->iface_type == MWIFIEX_PCIE) {
		p += sprintf(p, "\n=== %s register dump===\n",
			     adapter->iface_type == MWIFIEX_SDIO ?
							"SDIO" : "PCIE");
		if (adapter->if_ops.reg_dump)
			p += adapter->if_ops.reg_dump(adapter, p);
	}
	p += sprintf(p, "\n=== more debug information\n");
	debug_info = kzalloc(sizeof(*debug_info), GFP_KERNEL);
	if (debug_info) {
		for (i = 0; i < adapter->priv_num; i++) {
			if (!adapter->priv[i] || !adapter->priv[i]->netdev)
				continue;
			priv = adapter->priv[i];
			mwifiex_get_debug_info(priv, debug_info);
			p += mwifiex_debug_info_to_buffer(priv, p, debug_info);
			break;
		}
		kfree(debug_info);
	}

	strcpy(p, "\n========End dump========\n");
	p += strlen("\n========End dump========\n");
	mwifiex_dbg(adapter, MSG, "===mwifiex driverinfo dump end===\n");
	adapter->devdump_len = p - (char *)adapter->devdump_data;
}
EXPORT_SYMBOL_GPL(mwifiex_drv_info_dump);

void mwifiex_prepare_fw_dump_info(struct mwifiex_adapter *adapter)
{
	u8 idx;
	char *fw_dump_ptr;
	u32 dump_len = 0;

	for (idx = 0; idx < adapter->num_mem_types; idx++) {
		struct memory_type_mapping *entry =
				&adapter->mem_type_mapping_tbl[idx];

		if (entry->mem_ptr) {
			dump_len += (strlen("========Start dump ") +
					strlen(entry->mem_name) +
					strlen("========\n") +
					(entry->mem_size + 1) +
					strlen("\n========End dump========\n"));
		}
	}

	if (dump_len + 1 + adapter->devdump_len > MWIFIEX_FW_DUMP_SIZE) {
		/* Realloc in case buffer overflow */
		fw_dump_ptr = vzalloc(dump_len + 1 + adapter->devdump_len);
		mwifiex_dbg(adapter, MSG, "Realloc device dump data.\n");
		if (!fw_dump_ptr) {
			vfree(adapter->devdump_data);
			mwifiex_dbg(adapter, ERROR,
				    "vzalloc devdump data failure!\n");
			return;
		}

		memmove(fw_dump_ptr, adapter->devdump_data,
			adapter->devdump_len);
		vfree(adapter->devdump_data);
		adapter->devdump_data = fw_dump_ptr;
	}

	fw_dump_ptr = (char *)adapter->devdump_data + adapter->devdump_len;

	for (idx = 0; idx < adapter->num_mem_types; idx++) {
		struct memory_type_mapping *entry =
					&adapter->mem_type_mapping_tbl[idx];

		if (entry->mem_ptr) {
			strcpy(fw_dump_ptr, "========Start dump ");
			fw_dump_ptr += strlen("========Start dump ");

			strcpy(fw_dump_ptr, entry->mem_name);
			fw_dump_ptr += strlen(entry->mem_name);

			strcpy(fw_dump_ptr, "========\n");
			fw_dump_ptr += strlen("========\n");

			memcpy(fw_dump_ptr, entry->mem_ptr, entry->mem_size);
			fw_dump_ptr += entry->mem_size;

			strcpy(fw_dump_ptr, "\n========End dump========\n");
			fw_dump_ptr += strlen("\n========End dump========\n");
		}
	}

	adapter->devdump_len = fw_dump_ptr - (char *)adapter->devdump_data;

	for (idx = 0; idx < adapter->num_mem_types; idx++) {
		struct memory_type_mapping *entry =
			&adapter->mem_type_mapping_tbl[idx];

		vfree(entry->mem_ptr);
		entry->mem_ptr = NULL;
		entry->mem_size = 0;
	}
}
EXPORT_SYMBOL_GPL(mwifiex_prepare_fw_dump_info);

/*
 * CFG802.11 network device handler for statistics retrieval.
 */
static struct net_device_stats *mwifiex_get_stats(struct net_device *dev)
{
	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);

	return &priv->stats;
}

static u16
mwifiex_netdev_select_wmm_queue(struct net_device *dev, struct sk_buff *skb,
				struct net_device *sb_dev)
{
	skb->priority = cfg80211_classify8021d(skb, NULL);
	return mwifiex_1d_to_wmm_queue[skb->priority];
}

/* Network device handlers */
static const struct net_device_ops mwifiex_netdev_ops = {
	.ndo_open = mwifiex_open,
	.ndo_stop = mwifiex_close,
	.ndo_start_xmit = mwifiex_hard_start_xmit,
	.ndo_set_mac_address = mwifiex_ndo_set_mac_address,
	.ndo_validate_addr = eth_validate_addr,
	.ndo_tx_timeout = mwifiex_tx_timeout,
	.ndo_get_stats = mwifiex_get_stats,
	.ndo_set_rx_mode = mwifiex_set_multicast_list,
	.ndo_select_queue = mwifiex_netdev_select_wmm_queue,
};

/*
 * This function initializes the private structure parameters.
 *
 * The following wait queues are initialized -
 *      - IOCTL wait queue
 *      - Command wait queue
 *      - Statistics wait queue
 *
 * ...and the following default parameters are set -
 *      - Current key index     : Set to 0
 *      - Rate index            : Set to auto
 *      - Media connected       : Set to disconnected
 *      - Adhoc link sensed     : Set to false
 *      - Nick name             : Set to null
 *      - Number of Tx timeout  : Set to 0
 *      - Device address        : Set to current address
 *      - Rx histogram statistc : Set to 0
 *
 * In addition, the CFG80211 work queue is also created.
 */
void mwifiex_init_priv_params(struct mwifiex_private *priv,
			      struct net_device *dev)
{
	dev->netdev_ops = &mwifiex_netdev_ops;
	dev->needs_free_netdev = true;
	/* Initialize private structure */
	priv->current_key_index = 0;
	priv->media_connected = false;
	memset(priv->mgmt_ie, 0,
	       sizeof(struct mwifiex_ie) * MAX_MGMT_IE_INDEX);
	priv->beacon_idx = MWIFIEX_AUTO_IDX_MASK;
	priv->proberesp_idx = MWIFIEX_AUTO_IDX_MASK;
	priv->assocresp_idx = MWIFIEX_AUTO_IDX_MASK;
	priv->gen_idx = MWIFIEX_AUTO_IDX_MASK;
	priv->num_tx_timeout = 0;
	if (is_valid_ether_addr(dev->dev_addr))
		ether_addr_copy(priv->curr_addr, dev->dev_addr);
	else
		ether_addr_copy(priv->curr_addr, priv->adapter->perm_addr);

	if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA ||
	    GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) {
		priv->hist_data = kmalloc(sizeof(*priv->hist_data), GFP_KERNEL);
		if (priv->hist_data)
			mwifiex_hist_data_reset(priv);
	}
}

/*
 * This function check if command is pending.
 */
int is_command_pending(struct mwifiex_adapter *adapter)
{
	int is_cmd_pend_q_empty;

	spin_lock_bh(&adapter->cmd_pending_q_lock);
	is_cmd_pend_q_empty = list_empty(&adapter->cmd_pending_q);
	spin_unlock_bh(&adapter->cmd_pending_q_lock);

	return !is_cmd_pend_q_empty;
}

/*
 * This is the RX work queue function.
 *
 * It handles the RX operations.
 */
static void mwifiex_rx_work_queue(struct work_struct *work)
{
	struct mwifiex_adapter *adapter =
		container_of(work, struct mwifiex_adapter, rx_work);

	if (test_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags))
		return;
	mwifiex_process_rx(adapter);
}

/*
 * This is the main work queue function.
 *
 * It handles the main process, which in turn handles the complete
 * driver operations.
 */
static void mwifiex_main_work_queue(struct work_struct *work)
{
	struct mwifiex_adapter *adapter =
		container_of(work, struct mwifiex_adapter, main_work);

	if (test_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags))
		return;
	mwifiex_main_process(adapter);
}

/* Common teardown code used for both device removal and reset */
static void mwifiex_uninit_sw(struct mwifiex_adapter *adapter)
{
	struct mwifiex_private *priv;
	int i;

	/* We can no longer handle interrupts once we start doing the teardown
	 * below.
	 */
	if (adapter->if_ops.disable_int)
		adapter->if_ops.disable_int(adapter);

	set_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags);
	mwifiex_terminate_workqueue(adapter);
	adapter->int_status = 0;

	/* Stop data */
	for (i = 0; i < adapter->priv_num; i++) {
		priv = adapter->priv[i];
		if (priv && priv->netdev) {
			mwifiex_stop_net_dev_queue(priv->netdev, adapter);
			if (netif_carrier_ok(priv->netdev))
				netif_carrier_off(priv->netdev);
			netif_device_detach(priv->netdev);
		}
	}

	mwifiex_dbg(adapter, CMD, "cmd: calling mwifiex_shutdown_drv...\n");
	mwifiex_shutdown_drv(adapter);
	mwifiex_dbg(adapter, CMD, "cmd: mwifiex_shutdown_drv done\n");

	if (atomic_read(&adapter->rx_pending) ||
	    atomic_read(&adapter->tx_pending) ||
	    atomic_read(&adapter->cmd_pending)) {
		mwifiex_dbg(adapter, ERROR,
			    "rx_pending=%d, tx_pending=%d,\t"
			    "cmd_pending=%d\n",
			    atomic_read(&adapter->rx_pending),
			    atomic_read(&adapter->tx_pending),
			    atomic_read(&adapter->cmd_pending));
	}

	for (i = 0; i < adapter->priv_num; i++) {
		priv = adapter->priv[i];
		if (!priv)
			continue;
		rtnl_lock();
		if (priv->netdev &&
		    priv->wdev.iftype != NL80211_IFTYPE_UNSPECIFIED) {
			/*
			 * Close the netdev now, because if we do it later, the
			 * netdev notifiers will need to acquire the wiphy lock
			 * again --> deadlock.
			 */
			dev_close(priv->wdev.netdev);
			wiphy_lock(adapter->wiphy);
			mwifiex_del_virtual_intf(adapter->wiphy, &priv->wdev);
			wiphy_unlock(adapter->wiphy);
		}
		rtnl_unlock();
	}

	wiphy_unregister(adapter->wiphy);
	wiphy_free(adapter->wiphy);
	adapter->wiphy = NULL;

	vfree(adapter->chan_stats);
	mwifiex_free_cmd_buffers(adapter);
}

/*
 * This function can be used for shutting down the adapter SW.
 */
int mwifiex_shutdown_sw(struct mwifiex_adapter *adapter)
{
	struct mwifiex_private *priv;

	if (!adapter)
		return 0;

	wait_for_completion(adapter->fw_done);
	/* Caller should ensure we aren't suspending while this happens */
	reinit_completion(adapter->fw_done);

	priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
	mwifiex_deauthenticate(priv, NULL);

	mwifiex_init_shutdown_fw(priv, MWIFIEX_FUNC_SHUTDOWN);

	mwifiex_uninit_sw(adapter);
	adapter->is_up = false;

	if (adapter->if_ops.down_dev)
		adapter->if_ops.down_dev(adapter);

	return 0;
}
EXPORT_SYMBOL_GPL(mwifiex_shutdown_sw);

/* This function can be used for reinitting the adapter SW. Required
 * code is extracted from mwifiex_add_card()
 */
int
mwifiex_reinit_sw(struct mwifiex_adapter *adapter)
{
	int ret;

	mwifiex_init_lock_list(adapter);
	if (adapter->if_ops.up_dev)
		adapter->if_ops.up_dev(adapter);

	adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING;
	clear_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags);
	init_waitqueue_head(&adapter->init_wait_q);
	clear_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags);
	adapter->hs_activated = false;
	clear_bit(MWIFIEX_IS_CMD_TIMEDOUT, &adapter->work_flags);
	init_waitqueue_head(&adapter->hs_activate_wait_q);
	init_waitqueue_head(&adapter->cmd_wait_q.wait);
	adapter->cmd_wait_q.status = 0;
	adapter->scan_wait_q_woken = false;

	if ((num_possible_cpus() > 1) || adapter->iface_type == MWIFIEX_USB)
		adapter->rx_work_enabled = true;

	adapter->workqueue =
		alloc_workqueue("MWIFIEX_WORK_QUEUE",
				WQ_HIGHPRI | WQ_MEM_RECLAIM | WQ_UNBOUND, 1);
	if (!adapter->workqueue)
		goto err_kmalloc;

	INIT_WORK(&adapter->main_work, mwifiex_main_work_queue);

	if (adapter->rx_work_enabled) {
		adapter->rx_workqueue = alloc_workqueue("MWIFIEX_RX_WORK_QUEUE",
							WQ_HIGHPRI |
							WQ_MEM_RECLAIM |
							WQ_UNBOUND, 1);
		if (!adapter->rx_workqueue)
			goto err_kmalloc;
		INIT_WORK(&adapter->rx_work, mwifiex_rx_work_queue);
	}

	/* Register the device. Fill up the private data structure with
	 * relevant information from the card. Some code extracted from
	 * mwifiex_register_dev()
	 */
	mwifiex_dbg(adapter, INFO, "%s, mwifiex_init_hw_fw()...\n", __func__);

	if (mwifiex_init_hw_fw(adapter, false)) {
		mwifiex_dbg(adapter, ERROR,
			    "%s: firmware init failed\n", __func__);
		goto err_init_fw;
	}

	/* _mwifiex_fw_dpc() does its own cleanup */
	ret = _mwifiex_fw_dpc(adapter->firmware, adapter);
	if (ret) {
		pr_err("Failed to bring up adapter: %d\n", ret);
		return ret;
	}
	mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);

	return 0;

err_init_fw:
	mwifiex_dbg(adapter, ERROR, "info: %s: unregister device\n", __func__);
	if (adapter->if_ops.unregister_dev)
		adapter->if_ops.unregister_dev(adapter);

err_kmalloc:
	set_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags);
	mwifiex_terminate_workqueue(adapter);
	if (adapter->hw_status == MWIFIEX_HW_STATUS_READY) {
		mwifiex_dbg(adapter, ERROR,
			    "info: %s: shutdown mwifiex\n", __func__);
		mwifiex_shutdown_drv(adapter);
		mwifiex_free_cmd_buffers(adapter);
	}

	complete_all(adapter->fw_done);
	mwifiex_dbg(adapter, INFO, "%s, error\n", __func__);

	return -1;
}
EXPORT_SYMBOL_GPL(mwifiex_reinit_sw);

static irqreturn_t mwifiex_irq_wakeup_handler(int irq, void *priv)
{
	struct mwifiex_adapter *adapter = priv;

	dev_dbg(adapter->dev, "%s: wake by wifi", __func__);
	adapter->wake_by_wifi = true;
	disable_irq_nosync(irq);

	/* Notify PM core we are wakeup source */
	pm_wakeup_event(adapter->dev, 0);
	pm_system_wakeup();

	return IRQ_HANDLED;
}

static void mwifiex_probe_of(struct mwifiex_adapter *adapter)
{
	int ret;
	struct device *dev = adapter->dev;

	if (!dev->of_node)
		goto err_exit;

	adapter->dt_node = dev->of_node;
	adapter->irq_wakeup = irq_of_parse_and_map(adapter->dt_node, 0);
	if (!adapter->irq_wakeup) {
		dev_dbg(dev, "fail to parse irq_wakeup from device tree\n");
		goto err_exit;
	}

	ret = devm_request_irq(dev, adapter->irq_wakeup,
			       mwifiex_irq_wakeup_handler, IRQF_TRIGGER_LOW,
			       "wifi_wake", adapter);
	if (ret) {
		dev_err(dev, "Failed to request irq_wakeup %d (%d)\n",
			adapter->irq_wakeup, ret);
		goto err_exit;
	}

	disable_irq(adapter->irq_wakeup);
	if (device_init_wakeup(dev, true)) {
		dev_err(dev, "fail to init wakeup for mwifiex\n");
		goto err_exit;
	}
	return;

err_exit:
	adapter->irq_wakeup = -1;
}

/*
 * This function adds the card.
 *
 * This function follows the following major steps to set up the device -
 *      - Initialize software. This includes probing the card, registering
 *        the interface operations table, and allocating/initializing the
 *        adapter structure
 *      - Set up the netlink socket
 *      - Create and start the main work queue
 *      - Register the device
 *      - Initialize firmware and hardware
 *      - Add logical interfaces
 */
int
mwifiex_add_card(void *card, struct completion *fw_done,
		 struct mwifiex_if_ops *if_ops, u8 iface_type,
		 struct device *dev)
{
	struct mwifiex_adapter *adapter;

	if (mwifiex_register(card, dev, if_ops, (void **)&adapter)) {
		pr_err("%s: software init failed\n", __func__);
		goto err_init_sw;
	}

	mwifiex_probe_of(adapter);

	adapter->iface_type = iface_type;
	adapter->fw_done = fw_done;

	adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING;
	clear_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags);
	init_waitqueue_head(&adapter->init_wait_q);
	clear_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags);
	adapter->hs_activated = false;
	init_waitqueue_head(&adapter->hs_activate_wait_q);
	init_waitqueue_head(&adapter->cmd_wait_q.wait);
	adapter->cmd_wait_q.status = 0;
	adapter->scan_wait_q_woken = false;

	if ((num_possible_cpus() > 1) || adapter->iface_type == MWIFIEX_USB)
		adapter->rx_work_enabled = true;

	adapter->workqueue =
		alloc_workqueue("MWIFIEX_WORK_QUEUE",
				WQ_HIGHPRI | WQ_MEM_RECLAIM | WQ_UNBOUND, 1);
	if (!adapter->workqueue)
		goto err_kmalloc;

	INIT_WORK(&adapter->main_work, mwifiex_main_work_queue);

	if (adapter->rx_work_enabled) {
		adapter->rx_workqueue = alloc_workqueue("MWIFIEX_RX_WORK_QUEUE",
							WQ_HIGHPRI |
							WQ_MEM_RECLAIM |
							WQ_UNBOUND, 1);
		if (!adapter->rx_workqueue)
			goto err_kmalloc;

		INIT_WORK(&adapter->rx_work, mwifiex_rx_work_queue);
	}

	/* Register the device. Fill up the private data structure with relevant
	   information from the card. */
	if (adapter->if_ops.register_dev(adapter)) {
		pr_err("%s: failed to register mwifiex device\n", __func__);
		goto err_registerdev;
	}

	if (mwifiex_init_hw_fw(adapter, true)) {
		pr_err("%s: firmware init failed\n", __func__);
		goto err_init_fw;
	}

	return 0;

err_init_fw:
	pr_debug("info: %s: unregister device\n", __func__);
	if (adapter->if_ops.unregister_dev)
		adapter->if_ops.unregister_dev(adapter);
err_registerdev:
	set_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags);
	mwifiex_terminate_workqueue(adapter);
	if (adapter->hw_status == MWIFIEX_HW_STATUS_READY) {
		pr_debug("info: %s: shutdown mwifiex\n", __func__);
		mwifiex_shutdown_drv(adapter);
		mwifiex_free_cmd_buffers(adapter);
	}
err_kmalloc:
	if (adapter->irq_wakeup >= 0)
		device_init_wakeup(adapter->dev, false);
	mwifiex_free_adapter(adapter);

err_init_sw:

	return -1;
}
EXPORT_SYMBOL_GPL(mwifiex_add_card);

/*
 * This function removes the card.
 *
 * This function follows the following major steps to remove the device -
 *      - Stop data traffic
 *      - Shutdown firmware
 *      - Remove the logical interfaces
 *      - Terminate the work queue
 *      - Unregister the device
 *      - Free the adapter structure
 */
int mwifiex_remove_card(struct mwifiex_adapter *adapter)
{
	if (!adapter)
		return 0;

	if (adapter->is_up)
		mwifiex_uninit_sw(adapter);

	if (adapter->irq_wakeup >= 0)
		device_init_wakeup(adapter->dev, false);

	/* Unregister device */
	mwifiex_dbg(adapter, INFO,
		    "info: unregister device\n");
	if (adapter->if_ops.unregister_dev)
		adapter->if_ops.unregister_dev(adapter);
	/* Free adapter structure */
	mwifiex_dbg(adapter, INFO,
		    "info: free adapter\n");
	mwifiex_free_adapter(adapter);

	return 0;
}
EXPORT_SYMBOL_GPL(mwifiex_remove_card);

void _mwifiex_dbg(const struct mwifiex_adapter *adapter, int mask,
		  const char *fmt, ...)
{
	struct va_format vaf;
	va_list args;

	if (!(adapter->debug_mask & mask))
		return;

	va_start(args, fmt);

	vaf.fmt = fmt;
	vaf.va = &args;

	if (adapter->dev)
		dev_info(adapter->dev, "%pV", &vaf);
	else
		pr_info("%pV", &vaf);

	va_end(args);
}
EXPORT_SYMBOL_GPL(_mwifiex_dbg);

/*
 * This function initializes the module.
 *
 * The debug FS is also initialized if configured.
 */
static int
mwifiex_init_module(void)
{
#ifdef CONFIG_DEBUG_FS
	mwifiex_debugfs_init();
#endif
	return 0;
}

/*
 * This function cleans up the module.
 *
 * The debug FS is removed if available.
 */
static void
mwifiex_cleanup_module(void)
{
#ifdef CONFIG_DEBUG_FS
	mwifiex_debugfs_remove();
#endif
}

module_init(mwifiex_init_module);
module_exit(mwifiex_cleanup_module);

MODULE_AUTHOR("Marvell International Ltd.");
MODULE_DESCRIPTION("Marvell WiFi-Ex Driver version " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL v2");