mdio: translation of MMD EEE registers to/from ethtool settings
The helper functions which translate IEEE MDIO Manageable Device (MMD)
Energy-Efficient Ethernet (EEE) registers 3.20, 7.60 and 7.61 to and from
the comparable ethtool supported/advertised settings will be needed by
drivers other than those in PHYLIB (e.g. e1000e in a follow-on patch).
In the same fashion as similar translation functions in linux/mii.h, move
these functions from the PHYLIB core to the linux/mdio.h header file so the
code will not have to be duplicated in each driver needing MMD-to-ethtool
(and vice-versa) translations. The function and some variable names have
been renamed to be more descriptive.
Not tested on the only hardware that currently calls the related functions,
stmmac, because I don't have access to any. Has been compile tested and
the translations have been tested on a locally modified version of e1000e.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 7ca2ff9..ef9ea92 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1035,66 +1035,6 @@
bus->write(bus, addr, MII_MMD_DATA, data);
}
-static u32 phy_eee_to_adv(u16 eee_adv)
-{
- u32 adv = 0;
-
- if (eee_adv & MDIO_EEE_100TX)
- adv |= ADVERTISED_100baseT_Full;
- if (eee_adv & MDIO_EEE_1000T)
- adv |= ADVERTISED_1000baseT_Full;
- if (eee_adv & MDIO_EEE_10GT)
- adv |= ADVERTISED_10000baseT_Full;
- if (eee_adv & MDIO_EEE_1000KX)
- adv |= ADVERTISED_1000baseKX_Full;
- if (eee_adv & MDIO_EEE_10GKX4)
- adv |= ADVERTISED_10000baseKX4_Full;
- if (eee_adv & MDIO_EEE_10GKR)
- adv |= ADVERTISED_10000baseKR_Full;
-
- return adv;
-}
-
-static u32 phy_eee_to_supported(u16 eee_caported)
-{
- u32 supported = 0;
-
- if (eee_caported & MDIO_EEE_100TX)
- supported |= SUPPORTED_100baseT_Full;
- if (eee_caported & MDIO_EEE_1000T)
- supported |= SUPPORTED_1000baseT_Full;
- if (eee_caported & MDIO_EEE_10GT)
- supported |= SUPPORTED_10000baseT_Full;
- if (eee_caported & MDIO_EEE_1000KX)
- supported |= SUPPORTED_1000baseKX_Full;
- if (eee_caported & MDIO_EEE_10GKX4)
- supported |= SUPPORTED_10000baseKX4_Full;
- if (eee_caported & MDIO_EEE_10GKR)
- supported |= SUPPORTED_10000baseKR_Full;
-
- return supported;
-}
-
-static u16 phy_adv_to_eee(u32 adv)
-{
- u16 reg = 0;
-
- if (adv & ADVERTISED_100baseT_Full)
- reg |= MDIO_EEE_100TX;
- if (adv & ADVERTISED_1000baseT_Full)
- reg |= MDIO_EEE_1000T;
- if (adv & ADVERTISED_10000baseT_Full)
- reg |= MDIO_EEE_10GT;
- if (adv & ADVERTISED_1000baseKX_Full)
- reg |= MDIO_EEE_1000KX;
- if (adv & ADVERTISED_10000baseKX4_Full)
- reg |= MDIO_EEE_10GKX4;
- if (adv & ADVERTISED_10000baseKR_Full)
- reg |= MDIO_EEE_10GKR;
-
- return reg;
-}
-
/**
* phy_init_eee - init and check the EEE feature
* @phydev: target phy_device struct
@@ -1132,7 +1072,7 @@
if (eee_cap < 0)
return eee_cap;
- cap = phy_eee_to_supported(eee_cap);
+ cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
if (!cap)
goto eee_exit;
@@ -1149,8 +1089,8 @@
if (eee_adv < 0)
return eee_adv;
- adv = phy_eee_to_adv(eee_adv);
- lp = phy_eee_to_adv(eee_lp);
+ adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
+ lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
idx = phy_find_setting(phydev->speed, phydev->duplex);
if ((lp & adv & settings[idx].setting))
goto eee_exit;
@@ -1210,21 +1150,21 @@
MDIO_MMD_PCS, phydev->addr);
if (val < 0)
return val;
- data->supported = phy_eee_to_supported(val);
+ data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
/* Get advertisement EEE */
val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV,
MDIO_MMD_AN, phydev->addr);
if (val < 0)
return val;
- data->advertised = phy_eee_to_adv(val);
+ data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
/* Get LP advertisement EEE */
val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE,
MDIO_MMD_AN, phydev->addr);
if (val < 0)
return val;
- data->lp_advertised = phy_eee_to_adv(val);
+ data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
return 0;
}
@@ -1241,7 +1181,7 @@
{
int val;
- val = phy_adv_to_eee(data->advertised);
+ val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
phy_write_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
phydev->addr, val);
