diff --git a/.gitignore b/.gitignore
index efab0eb..a2939fc 100644
--- a/.gitignore
+++ b/.gitignore
@@ -34,14 +34,18 @@
 #
 # Top-level generic files
 #
-tags
-TAGS
-linux
-vmlinux
-vmlinuz
-System.map
-Module.markers
-Module.symvers
+/tags
+/TAGS
+/linux
+/vmlinux
+/vmlinuz
+/System.map
+/Module.markers
+/Module.symvers
+
+#
+# git files that we don't want to ignore even it they are dot-files
+#
 !.gitignore
 !.mailmap
 
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 5aceb88..05e2ae2 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -4,20 +4,18 @@
         James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
 
 This document describes the DMA API.  For a more gentle introduction
-phrased in terms of the pci_ equivalents (and actual examples) see
-Documentation/PCI/PCI-DMA-mapping.txt.
+of the API (and actual examples) see
+Documentation/DMA-API-HOWTO.txt.
 
-This API is split into two pieces.  Part I describes the API and the
-corresponding pci_ API.  Part II describes the extensions to the API
-for supporting non-consistent memory machines.  Unless you know that
-your driver absolutely has to support non-consistent platforms (this
-is usually only legacy platforms) you should only use the API
-described in part I.
+This API is split into two pieces.  Part I describes the API.  Part II
+describes the extensions to the API for supporting non-consistent
+memory machines.  Unless you know that your driver absolutely has to
+support non-consistent platforms (this is usually only legacy
+platforms) you should only use the API described in part I.
 
-Part I - pci_ and dma_ Equivalent API 
+Part I - dma_ API
 -------------------------------------
 
-To get the pci_ API, you must #include <linux/pci.h>
 To get the dma_ API, you must #include <linux/dma-mapping.h>
 
 
@@ -27,9 +25,6 @@
 void *
 dma_alloc_coherent(struct device *dev, size_t size,
 			     dma_addr_t *dma_handle, gfp_t flag)
-void *
-pci_alloc_consistent(struct pci_dev *dev, size_t size,
-			     dma_addr_t *dma_handle)
 
 Consistent memory is memory for which a write by either the device or
 the processor can immediately be read by the processor or device
@@ -53,15 +48,11 @@
 The flag parameter (dma_alloc_coherent only) allows the caller to
 specify the GFP_ flags (see kmalloc) for the allocation (the
 implementation may choose to ignore flags that affect the location of
-the returned memory, like GFP_DMA).  For pci_alloc_consistent, you
-must assume GFP_ATOMIC behaviour.
+the returned memory, like GFP_DMA).
 
 void
 dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
 			   dma_addr_t dma_handle)
-void
-pci_free_consistent(struct pci_dev *dev, size_t size, void *cpu_addr,
-			   dma_addr_t dma_handle)
 
 Free the region of consistent memory you previously allocated.  dev,
 size and dma_handle must all be the same as those passed into the
@@ -89,10 +80,6 @@
 	dma_pool_create(const char *name, struct device *dev,
 			size_t size, size_t align, size_t alloc);
 
-	struct pci_pool *
-	pci_pool_create(const char *name, struct pci_device *dev,
-			size_t size, size_t align, size_t alloc);
-
 The pool create() routines initialize a pool of dma-coherent buffers
 for use with a given device.  It must be called in a context which
 can sleep.
@@ -108,9 +95,6 @@
 	void *dma_pool_alloc(struct dma_pool *pool, gfp_t gfp_flags,
 			dma_addr_t *dma_handle);
 
-	void *pci_pool_alloc(struct pci_pool *pool, gfp_t gfp_flags,
-			dma_addr_t *dma_handle);
-
 This allocates memory from the pool; the returned memory will meet the size
 and alignment requirements specified at creation time.  Pass GFP_ATOMIC to
 prevent blocking, or if it's permitted (not in_interrupt, not holding SMP locks),
@@ -122,9 +106,6 @@
 	void dma_pool_free(struct dma_pool *pool, void *vaddr,
 			dma_addr_t addr);
 
-	void pci_pool_free(struct pci_pool *pool, void *vaddr,
-			dma_addr_t addr);
-
 This puts memory back into the pool.  The pool is what was passed to
 the pool allocation routine; the cpu (vaddr) and dma addresses are what
 were returned when that routine allocated the memory being freed.
@@ -132,8 +113,6 @@
 
 	void dma_pool_destroy(struct dma_pool *pool);
 
-	void pci_pool_destroy(struct pci_pool *pool);
-
 The pool destroy() routines free the resources of the pool.  They must be
 called in a context which can sleep.  Make sure you've freed all allocated
 memory back to the pool before you destroy it.
@@ -144,8 +123,6 @@
 
 int
 dma_supported(struct device *dev, u64 mask)
-int
-pci_dma_supported(struct pci_dev *hwdev, u64 mask)
 
 Checks to see if the device can support DMA to the memory described by
 mask.
@@ -159,8 +136,14 @@
 
 int
 dma_set_mask(struct device *dev, u64 mask)
+
+Checks to see if the mask is possible and updates the device
+parameters if it is.
+
+Returns: 0 if successful and a negative error if not.
+
 int
-pci_set_dma_mask(struct pci_device *dev, u64 mask)
+dma_set_coherent_mask(struct device *dev, u64 mask)
 
 Checks to see if the mask is possible and updates the device
 parameters if it is.
@@ -187,9 +170,6 @@
 dma_addr_t
 dma_map_single(struct device *dev, void *cpu_addr, size_t size,
 		      enum dma_data_direction direction)
-dma_addr_t
-pci_map_single(struct pci_dev *hwdev, void *cpu_addr, size_t size,
-		      int direction)
 
 Maps a piece of processor virtual memory so it can be accessed by the
 device and returns the physical handle of the memory.
@@ -198,14 +178,10 @@
 However the dma_ API uses a strongly typed enumerator for its
 direction:
 
-DMA_NONE		= PCI_DMA_NONE		no direction (used for
-						debugging)
-DMA_TO_DEVICE		= PCI_DMA_TODEVICE	data is going from the
-						memory to the device
-DMA_FROM_DEVICE		= PCI_DMA_FROMDEVICE	data is coming from
-						the device to the
-						memory
-DMA_BIDIRECTIONAL	= PCI_DMA_BIDIRECTIONAL	direction isn't known
+DMA_NONE		no direction (used for debugging)
+DMA_TO_DEVICE		data is going from the memory to the device
+DMA_FROM_DEVICE		data is coming from the device to the memory
+DMA_BIDIRECTIONAL	direction isn't known
 
 Notes:  Not all memory regions in a machine can be mapped by this
 API.  Further, regions that appear to be physically contiguous in
@@ -268,9 +244,6 @@
 void
 dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		 enum dma_data_direction direction)
-void
-pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
-		 size_t size, int direction)
 
 Unmaps the region previously mapped.  All the parameters passed in
 must be identical to those passed in (and returned) by the mapping
@@ -280,15 +253,9 @@
 dma_map_page(struct device *dev, struct page *page,
 		    unsigned long offset, size_t size,
 		    enum dma_data_direction direction)
-dma_addr_t
-pci_map_page(struct pci_dev *hwdev, struct page *page,
-		    unsigned long offset, size_t size, int direction)
 void
 dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
 	       enum dma_data_direction direction)
-void
-pci_unmap_page(struct pci_dev *hwdev, dma_addr_t dma_address,
-	       size_t size, int direction)
 
 API for mapping and unmapping for pages.  All the notes and warnings
 for the other mapping APIs apply here.  Also, although the <offset>
@@ -299,9 +266,6 @@
 int
 dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 
-int
-pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr)
-
 In some circumstances dma_map_single and dma_map_page will fail to create
 a mapping. A driver can check for these errors by testing the returned
 dma address with dma_mapping_error(). A non-zero return value means the mapping
@@ -311,9 +275,6 @@
 	int
 	dma_map_sg(struct device *dev, struct scatterlist *sg,
 		int nents, enum dma_data_direction direction)
-	int
-	pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-		int nents, int direction)
 
 Returns: the number of physical segments mapped (this may be shorter
 than <nents> passed in if some elements of the scatter/gather list are
@@ -353,9 +314,6 @@
 	void
 	dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 		int nhwentries, enum dma_data_direction direction)
-	void
-	pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-		int nents, int direction)
 
 Unmap the previously mapped scatter/gather list.  All the parameters
 must be the same as those and passed in to the scatter/gather mapping
@@ -365,21 +323,23 @@
 physical entries returned.
 
 void
-dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction)
 void
-pci_dma_sync_single(struct pci_dev *hwdev, dma_addr_t dma_handle,
-			   size_t size, int direction)
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+			   enum dma_data_direction direction)
 void
-dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
-			  enum dma_data_direction direction)
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		    enum dma_data_direction direction)
 void
-pci_dma_sync_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-		       int nelems, int direction)
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+		       enum dma_data_direction direction)
 
-Synchronise a single contiguous or scatter/gather mapping.  All the
-parameters must be the same as those passed into the single mapping
-API.
+Synchronise a single contiguous or scatter/gather mapping for the cpu
+and device. With the sync_sg API, all the parameters must be the same
+as those passed into the single mapping API. With the sync_single API,
+you can use dma_handle and size parameters that aren't identical to
+those passed into the single mapping API to do a partial sync.
 
 Notes:  You must do this:
 
@@ -461,9 +421,9 @@
 Part II - Advanced dma_ usage
 -----------------------------
 
-Warning: These pieces of the DMA API have no PCI equivalent.  They
-should also not be used in the majority of cases, since they cater for
-unlikely corner cases that don't belong in usual drivers.
+Warning: These pieces of the DMA API should not be used in the
+majority of cases, since they cater for unlikely corner cases that
+don't belong in usual drivers.
 
 If you don't understand how cache line coherency works between a
 processor and an I/O device, you should not be using this part of the
@@ -514,16 +474,6 @@
 of two for easy alignment.
 
 void
-dma_sync_single_range(struct device *dev, dma_addr_t dma_handle,
-		      unsigned long offset, size_t size,
-		      enum dma_data_direction direction)
-
-Does a partial sync, starting at offset and continuing for size.  You
-must be careful to observe the cache alignment and width when doing
-anything like this.  You must also be extra careful about accessing
-memory you intend to sync partially.
-
-void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	       enum dma_data_direction direction)
 
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 5e7d84b..133cd6c 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -488,7 +488,7 @@
 				The ECC bytes must be placed immidiately after the data
 				bytes in order to make the syndrome generator work. This
 				is contrary to the usual layout used by software ECC. The
-				seperation of data and out of band area is not longer
+				separation of data and out of band area is not longer
 				possible. The nand driver code handles this layout and
 				the remaining free bytes in the oob area are managed by 
 				the autoplacement code. Provide a matching oob-layout
@@ -560,7 +560,7 @@
 				bad blocks. They have factory marked good blocks. The marker pattern
 				is erased when the block is erased to be reused. So in case of
 				powerloss before writing the pattern back to the chip this block 
-				would be lost and added to the bad blocks. Therefor we scan the 
+				would be lost and added to the bad blocks. Therefore we scan the 
 				chip(s) when we detect them the first time for good blocks and 
 				store this information in a bad block table before erasing any 
 				of the blocks.
@@ -1094,7 +1094,7 @@
 		manufacturers specifications. This applies similar to the spare area. 
 	</para>
 	<para>
-		Therefor NAND aware filesystems must either write in page size chunks
+		Therefore NAND aware filesystems must either write in page size chunks
 		or hold a writebuffer to collect smaller writes until they sum up to 
 		pagesize. Available NAND aware filesystems: JFFS2, YAFFS. 		
 	</para>
diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml
index c65f0ac..cea23e1 100644
--- a/Documentation/DocBook/v4l/common.xml
+++ b/Documentation/DocBook/v4l/common.xml
@@ -1170,7 +1170,7 @@
 captured or output, applications can request frame skipping or
 duplicating on the driver side. This is especially useful when using
 the &func-read; or &func-write;, which are not augmented by timestamps
-or sequence counters, and to avoid unneccessary data copying.</para>
+or sequence counters, and to avoid unnecessary data copying.</para>
 
     <para>Finally these ioctls can be used to determine the number of
 buffers used internally by a driver in read/write mode. For
diff --git a/Documentation/DocBook/v4l/vidioc-g-parm.xml b/Documentation/DocBook/v4l/vidioc-g-parm.xml
index 78332d3..392aa9e 100644
--- a/Documentation/DocBook/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/v4l/vidioc-g-parm.xml
@@ -55,7 +55,7 @@
 duplicating on the driver side. This is especially useful when using
 the <function>read()</function> or <function>write()</function>, which
 are not augmented by timestamps or sequence counters, and to avoid
-unneccessary data copying.</para>
+unnecessary data copying.</para>
 
     <para>Further these ioctls can be used to determine the number of
 buffers used internally by a driver in read/write mode. For
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 8495fc9..f5395af 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -221,8 +221,8 @@
   - main 2.6.x kernel tree
   - 2.6.x.y -stable kernel tree
   - 2.6.x -git kernel patches
-  - 2.6.x -mm kernel patches
   - subsystem specific kernel trees and patches
+  - the 2.6.x -next kernel tree for integration tests
 
 2.6.x kernel tree
 -----------------
@@ -232,7 +232,7 @@
   - As soon as a new kernel is released a two weeks window is open,
     during this period of time maintainers can submit big diffs to
     Linus, usually the patches that have already been included in the
-    -mm kernel for a few weeks.  The preferred way to submit big changes
+    -next kernel for a few weeks.  The preferred way to submit big changes
     is using git (the kernel's source management tool, more information
     can be found at http://git.or.cz/) but plain patches are also just
     fine.
@@ -293,84 +293,43 @@
 experimental than -rc kernels since they are generated automatically
 without even a cursory glance to see if they are sane.
 
-2.6.x -mm kernel patches
-------------------------
-These are experimental kernel patches released by Andrew Morton.  Andrew
-takes all of the different subsystem kernel trees and patches and mushes
-them together, along with a lot of patches that have been plucked from
-the linux-kernel mailing list.  This tree serves as a proving ground for
-new features and patches.  Once a patch has proved its worth in -mm for
-a while Andrew or the subsystem maintainer pushes it on to Linus for
-inclusion in mainline.
-
-It is heavily encouraged that all new patches get tested in the -mm tree
-before they are sent to Linus for inclusion in the main kernel tree.  Code
-which does not make an appearance in -mm before the opening of the merge
-window will prove hard to merge into the mainline.
-
-These kernels are not appropriate for use on systems that are supposed
-to be stable and they are more risky to run than any of the other
-branches.
-
-If you wish to help out with the kernel development process, please test
-and use these kernel releases and provide feedback to the linux-kernel
-mailing list if you have any problems, and if everything works properly.
-
-In addition to all the other experimental patches, these kernels usually
-also contain any changes in the mainline -git kernels available at the
-time of release.
-
-The -mm kernels are not released on a fixed schedule, but usually a few
--mm kernels are released in between each -rc kernel (1 to 3 is common).
-
 Subsystem Specific kernel trees and patches
 -------------------------------------------
-A number of the different kernel subsystem developers expose their
-development trees so that others can see what is happening in the
-different areas of the kernel.  These trees are pulled into the -mm
-kernel releases as described above.
+The maintainers of the various kernel subsystems --- and also many
+kernel subsystem developers --- expose their current state of
+development in source repositories.  That way, others can see what is
+happening in the different areas of the kernel.  In areas where
+development is rapid, a developer may be asked to base his submissions
+onto such a subsystem kernel tree so that conflicts between the
+submission and other already ongoing work are avoided.
 
-Here is a list of some of the different kernel trees available:
-  git trees:
-    - Kbuild development tree, Sam Ravnborg <sam@ravnborg.org>
-	git.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
+Most of these repositories are git trees, but there are also other SCMs
+in use, or patch queues being published as quilt series.  Addresses of
+these subsystem repositories are listed in the MAINTAINERS file.  Many
+of them can be browsed at http://git.kernel.org/.
 
-    - ACPI development tree, Len Brown <len.brown@intel.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
+Before a proposed patch is committed to such a subsystem tree, it is
+subject to review which primarily happens on mailing lists (see the
+respective section below).  For several kernel subsystems, this review
+process is tracked with the tool patchwork.  Patchwork offers a web
+interface which shows patch postings, any comments on a patch or
+revisions to it, and maintainers can mark patches as under review,
+accepted, or rejected.  Most of these patchwork sites are listed at
+http://patchwork.kernel.org/ or http://patchwork.ozlabs.org/.
 
-    - Block development tree, Jens Axboe <jens.axboe@oracle.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
+2.6.x -next kernel tree for integration tests
+---------------------------------------------
+Before updates from subsystem trees are merged into the mainline 2.6.x
+tree, they need to be integration-tested.  For this purpose, a special
+testing repository exists into which virtually all subsystem trees are
+pulled on an almost daily basis:
+	http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+	http://linux.f-seidel.de/linux-next/pmwiki/
 
-    - DRM development tree, Dave Airlie <airlied@linux.ie>
-	git.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+This way, the -next kernel gives a summary outlook onto what will be
+expected to go into the mainline kernel at the next merge period.
+Adventurous testers are very welcome to runtime-test the -next kernel.
 
-    - ia64 development tree, Tony Luck <tony.luck@intel.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
-
-    - infiniband, Roland Dreier <rolandd@cisco.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
-
-    - libata, Jeff Garzik <jgarzik@pobox.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
-
-    - network drivers, Jeff Garzik <jgarzik@pobox.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
-
-    - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
-	git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
-
-    - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
-
-    - x86, Ingo Molnar <mingo@elte.hu>
-	git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
-
-  quilt trees:
-    - USB, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de>
-	kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
-
-  Other kernel trees can be found listed at http://git.kernel.org/ and in
-  the MAINTAINERS file.
 
 Bug Reporting
 -------------
diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
index bc38283..69dd29e 100644
--- a/Documentation/IPMI.txt
+++ b/Documentation/IPMI.txt
@@ -365,6 +365,7 @@
        regshifts=<shift1>,<shift2>,...
        slave_addrs=<addr1>,<addr2>,...
        force_kipmid=<enable1>,<enable2>,...
+       kipmid_max_busy_us=<ustime1>,<ustime2>,...
        unload_when_empty=[0|1]
 
 Each of these except si_trydefaults is a list, the first item for the
@@ -433,6 +434,7 @@
        ipmi_si.regshifts=<shift1>,<shift2>,...
        ipmi_si.slave_addrs=<addr1>,<addr2>,...
        ipmi_si.force_kipmid=<enable1>,<enable2>,...
+       ipmi_si.kipmid_max_busy_us=<ustime1>,<ustime2>,...
 
 It works the same as the module parameters of the same names.
 
@@ -450,6 +452,16 @@
 interrupts, the driver will run VERY slowly.  Don't blame me,
 these interfaces suck.
 
+Unfortunately, this thread can use a lot of CPU depending on the
+interface's performance.  This can waste a lot of CPU and cause
+various issues with detecting idle CPU and using extra power.  To
+avoid this, the kipmid_max_busy_us sets the maximum amount of time, in
+microseconds, that kipmid will spin before sleeping for a tick.  This
+value sets a balance between performance and CPU waste and needs to be
+tuned to your needs.  Maybe, someday, auto-tuning will be added, but
+that's not a simple thing and even the auto-tuning would need to be
+tuned to the user's desired performance.
+
 The driver supports a hot add and remove of interfaces.  This way,
 interfaces can be added or removed after the kernel is up and running.
 This is done using /sys/modules/ipmi_si/parameters/hotmod, which is a
diff --git a/Documentation/Makefile b/Documentation/Makefile
index 94b9457..6fc7ea1 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -1,3 +1,3 @@
 obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
-	filesystems/configfs/ ia64/ networking/ \
-	pcmcia/ spi/ video4linux/ vm/ watchdog/src/
+	filesystems/ filesystems/configfs/ ia64/ laptops/ networking/ \
+	pcmcia/ spi/ timers/ video4linux/ vm/ watchdog/src/
diff --git a/Documentation/PCI/PCI-DMA-mapping.txt b/Documentation/PCI/PCI-DMA-mapping.txt
index ecad88d..52618ab 100644
--- a/Documentation/PCI/PCI-DMA-mapping.txt
+++ b/Documentation/PCI/PCI-DMA-mapping.txt
@@ -1,12 +1,12 @@
-			Dynamic DMA mapping
-			===================
+		     Dynamic DMA mapping Guide
+		     =========================
 
 		 David S. Miller <davem@redhat.com>
 		 Richard Henderson <rth@cygnus.com>
 		  Jakub Jelinek <jakub@redhat.com>
 
-This document describes the DMA mapping system in terms of the pci_
-API.  For a similar API that works for generic devices, see
+This is a guide to device driver writers on how to use the DMA API
+with example pseudo-code.  For a concise description of the API, see
 DMA-API.txt.
 
 Most of the 64bit platforms have special hardware that translates bus
@@ -26,12 +26,15 @@
 transfer.
 
 The following API will work of course even on platforms where no such
-hardware exists, see e.g. arch/x86/include/asm/pci.h for how it is implemented on
-top of the virt_to_bus interface.
+hardware exists.
+
+Note that the DMA API works with any bus independent of the underlying
+microprocessor architecture. You should use the DMA API rather than
+the bus specific DMA API (e.g. pci_dma_*).
 
 First of all, you should make sure
 
-#include <linux/pci.h>
+#include <linux/dma-mapping.h>
 
 is in your driver. This file will obtain for you the definition of the
 dma_addr_t (which can hold any valid DMA address for the platform)
@@ -78,44 +81,43 @@
 			DMA addressing limitations
 
 Does your device have any DMA addressing limitations?  For example, is
-your device only capable of driving the low order 24-bits of address
-on the PCI bus for SAC DMA transfers?  If so, you need to inform the
-PCI layer of this fact.
+your device only capable of driving the low order 24-bits of address?
+If so, you need to inform the kernel of this fact.
 
 By default, the kernel assumes that your device can address the full
-32-bits in a SAC cycle.  For a 64-bit DAC capable device, this needs
-to be increased.  And for a device with limitations, as discussed in
-the previous paragraph, it needs to be decreased.
+32-bits.  For a 64-bit capable device, this needs to be increased.
+And for a device with limitations, as discussed in the previous
+paragraph, it needs to be decreased.
 
-pci_alloc_consistent() by default will return 32-bit DMA addresses.
-PCI-X specification requires PCI-X devices to support 64-bit
-addressing (DAC) for all transactions. And at least one platform (SGI
-SN2) requires 64-bit consistent allocations to operate correctly when
-the IO bus is in PCI-X mode. Therefore, like with pci_set_dma_mask(),
-it's good practice to call pci_set_consistent_dma_mask() to set the
-appropriate mask even if your device only supports 32-bit DMA
-(default) and especially if it's a PCI-X device.
+Special note about PCI: PCI-X specification requires PCI-X devices to
+support 64-bit addressing (DAC) for all transactions.  And at least
+one platform (SGI SN2) requires 64-bit consistent allocations to
+operate correctly when the IO bus is in PCI-X mode.
 
-For correct operation, you must interrogate the PCI layer in your
-device probe routine to see if the PCI controller on the machine can
-properly support the DMA addressing limitation your device has.  It is
-good style to do this even if your device holds the default setting,
+For correct operation, you must interrogate the kernel in your device
+probe routine to see if the DMA controller on the machine can properly
+support the DMA addressing limitation your device has.  It is good
+style to do this even if your device holds the default setting,
 because this shows that you did think about these issues wrt. your
 device.
 
-The query is performed via a call to pci_set_dma_mask():
+The query is performed via a call to dma_set_mask():
 
-	int pci_set_dma_mask(struct pci_dev *pdev, u64 device_mask);
+	int dma_set_mask(struct device *dev, u64 mask);
 
 The query for consistent allocations is performed via a call to
-pci_set_consistent_dma_mask():
+dma_set_coherent_mask():
 
-	int pci_set_consistent_dma_mask(struct pci_dev *pdev, u64 device_mask);
+	int dma_set_coherent_mask(struct device *dev, u64 mask);
 
-Here, pdev is a pointer to the PCI device struct of your device, and
-device_mask is a bit mask describing which bits of a PCI address your
-device supports.  It returns zero if your card can perform DMA
-properly on the machine given the address mask you provided.
+Here, dev is a pointer to the device struct of your device, and mask
+is a bit mask describing which bits of an address your device
+supports.  It returns zero if your card can perform DMA properly on
+the machine given the address mask you provided.  In general, the
+device struct of your device is embedded in the bus specific device
+struct of your device.  For example, a pointer to the device struct of
+your PCI device is pdev->dev (pdev is a pointer to the PCI device
+struct of your device).
 
 If it returns non-zero, your device cannot perform DMA properly on
 this platform, and attempting to do so will result in undefined
@@ -133,31 +135,30 @@
 even detected, you can ask them for the kernel messages to find out
 exactly why.
 
-The standard 32-bit addressing PCI device would do something like
-this:
+The standard 32-bit addressing device would do something like this:
 
-	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+	if (dma_set_mask(dev, DMA_BIT_MASK(32))) {
 		printk(KERN_WARNING
 		       "mydev: No suitable DMA available.\n");
 		goto ignore_this_device;
 	}
 
-Another common scenario is a 64-bit capable device.  The approach
-here is to try for 64-bit DAC addressing, but back down to a
-32-bit mask should that fail.  The PCI platform code may fail the
-64-bit mask not because the platform is not capable of 64-bit
-addressing.  Rather, it may fail in this case simply because
-32-bit SAC addressing is done more efficiently than DAC addressing.
-Sparc64 is one platform which behaves in this way.
+Another common scenario is a 64-bit capable device.  The approach here
+is to try for 64-bit addressing, but back down to a 32-bit mask that
+should not fail.  The kernel may fail the 64-bit mask not because the
+platform is not capable of 64-bit addressing.  Rather, it may fail in
+this case simply because 32-bit addressing is done more efficiently
+than 64-bit addressing.  For example, Sparc64 PCI SAC addressing is
+more efficient than DAC addressing.
 
 Here is how you would handle a 64-bit capable device which can drive
 all 64-bits when accessing streaming DMA:
 
 	int using_dac;
 
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+	if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
 		using_dac = 1;
-	} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+	} else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
 		using_dac = 0;
 	} else {
 		printk(KERN_WARNING
@@ -170,36 +171,36 @@
 
 	int using_dac, consistent_using_dac;
 
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+	if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
 		using_dac = 1;
 	   	consistent_using_dac = 1;
-		pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-	} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+		dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
+	} else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
 		using_dac = 0;
 		consistent_using_dac = 0;
-		pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
 	} else {
 		printk(KERN_WARNING
 		       "mydev: No suitable DMA available.\n");
 		goto ignore_this_device;
 	}
 
-pci_set_consistent_dma_mask() will always be able to set the same or a
-smaller mask as pci_set_dma_mask(). However for the rare case that a
+dma_set_coherent_mask() will always be able to set the same or a
+smaller mask as dma_set_mask(). However for the rare case that a
 device driver only uses consistent allocations, one would have to
-check the return value from pci_set_consistent_dma_mask().
+check the return value from dma_set_coherent_mask().
 
 Finally, if your device can only drive the low 24-bits of
-address during PCI bus mastering you might do something like:
+address you might do something like:
 
-	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(24))) {
+	if (dma_set_mask(dev, DMA_BIT_MASK(24))) {
 		printk(KERN_WARNING
 		       "mydev: 24-bit DMA addressing not available.\n");
 		goto ignore_this_device;
 	}
 
-When pci_set_dma_mask() is successful, and returns zero, the PCI layer
-saves away this mask you have provided.  The PCI layer will use this
+When dma_set_mask() is successful, and returns zero, the kernel saves
+away this mask you have provided.  The kernel will use this
 information later when you make DMA mappings.
 
 There is a case which we are aware of at this time, which is worth
@@ -208,7 +209,7 @@
 functions) and the various different functions have _different_
 DMA addressing limitations, you may wish to probe each mask and
 only provide the functionality which the machine can handle.  It
-is important that the last call to pci_set_dma_mask() be for the
+is important that the last call to dma_set_mask() be for the
 most specific mask.
 
 Here is pseudo-code showing how this might be done:
@@ -217,17 +218,17 @@
 	#define RECORD_ADDRESS_BITS	DMA_BIT_MASK(24)
 
 	struct my_sound_card *card;
-	struct pci_dev *pdev;
+	struct device *dev;
 
 	...
-	if (!pci_set_dma_mask(pdev, PLAYBACK_ADDRESS_BITS)) {
+	if (!dma_set_mask(dev, PLAYBACK_ADDRESS_BITS)) {
 		card->playback_enabled = 1;
 	} else {
 		card->playback_enabled = 0;
 		printk(KERN_WARNING "%s: Playback disabled due to DMA limitations.\n",
 		       card->name);
 	}
-	if (!pci_set_dma_mask(pdev, RECORD_ADDRESS_BITS)) {
+	if (!dma_set_mask(dev, RECORD_ADDRESS_BITS)) {
 		card->record_enabled = 1;
 	} else {
 		card->record_enabled = 0;
@@ -252,8 +253,8 @@
   Think of "consistent" as "synchronous" or "coherent".
 
   The current default is to return consistent memory in the low 32
-  bits of the PCI bus space.  However, for future compatibility you
-  should set the consistent mask even if this default is fine for your
+  bits of the bus space.  However, for future compatibility you should
+  set the consistent mask even if this default is fine for your
   driver.
 
   Good examples of what to use consistent mappings for are:
@@ -285,9 +286,9 @@
 	     found in PCI bridges (such as by reading a register's value
 	     after writing it).
 
-- Streaming DMA mappings which are usually mapped for one DMA transfer,
-  unmapped right after it (unless you use pci_dma_sync_* below) and for which
-  hardware can optimize for sequential accesses.
+- Streaming DMA mappings which are usually mapped for one DMA
+  transfer, unmapped right after it (unless you use dma_sync_* below)
+  and for which hardware can optimize for sequential accesses.
 
   This of "streaming" as "asynchronous" or "outside the coherency
   domain".
@@ -302,8 +303,8 @@
   optimizations the hardware allows.  To this end, when using
   such mappings you must be explicit about what you want to happen.
 
-Neither type of DMA mapping has alignment restrictions that come
-from PCI, although some devices may have such restrictions.
+Neither type of DMA mapping has alignment restrictions that come from
+the underlying bus, although some devices may have such restrictions.
 Also, systems with caches that aren't DMA-coherent will work better
 when the underlying buffers don't share cache lines with other data.
 
@@ -315,33 +316,27 @@
 
 	dma_addr_t dma_handle;
 
-	cpu_addr = pci_alloc_consistent(pdev, size, &dma_handle);
+	cpu_addr = dma_alloc_coherent(dev, size, &dma_handle, gfp);
 
-where pdev is a struct pci_dev *. This may be called in interrupt context.
-You should use dma_alloc_coherent (see DMA-API.txt) for buses
-where devices don't have struct pci_dev (like ISA, EISA).
-
-This argument is needed because the DMA translations may be bus
-specific (and often is private to the bus which the device is attached
-to).
+where device is a struct device *. This may be called in interrupt
+context with the GFP_ATOMIC flag.
 
 Size is the length of the region you want to allocate, in bytes.
 
 This routine will allocate RAM for that region, so it acts similarly to
 __get_free_pages (but takes size instead of a page order).  If your
 driver needs regions sized smaller than a page, you may prefer using
-the pci_pool interface, described below.
+the dma_pool interface, described below.
 
-The consistent DMA mapping interfaces, for non-NULL pdev, will by
-default return a DMA address which is SAC (Single Address Cycle)
-addressable.  Even if the device indicates (via PCI dma mask) that it
-may address the upper 32-bits and thus perform DAC cycles, consistent
-allocation will only return > 32-bit PCI addresses for DMA if the
-consistent dma mask has been explicitly changed via
-pci_set_consistent_dma_mask().  This is true of the pci_pool interface
-as well.
+The consistent DMA mapping interfaces, for non-NULL dev, will by
+default return a DMA address which is 32-bit addressable.  Even if the
+device indicates (via DMA mask) that it may address the upper 32-bits,
+consistent allocation will only return > 32-bit addresses for DMA if
+the consistent DMA mask has been explicitly changed via
+dma_set_coherent_mask().  This is true of the dma_pool interface as
+well.
 
-pci_alloc_consistent returns two values: the virtual address which you
+dma_alloc_coherent returns two values: the virtual address which you
 can use to access it from the CPU and dma_handle which you pass to the
 card.
 
@@ -354,54 +349,54 @@
 
 To unmap and free such a DMA region, you call:
 
-	pci_free_consistent(pdev, size, cpu_addr, dma_handle);
+	dma_free_coherent(dev, size, cpu_addr, dma_handle);
 
-where pdev, size are the same as in the above call and cpu_addr and
-dma_handle are the values pci_alloc_consistent returned to you.
+where dev, size are the same as in the above call and cpu_addr and
+dma_handle are the values dma_alloc_coherent returned to you.
 This function may not be called in interrupt context.
 
 If your driver needs lots of smaller memory regions, you can write
-custom code to subdivide pages returned by pci_alloc_consistent,
-or you can use the pci_pool API to do that.  A pci_pool is like
-a kmem_cache, but it uses pci_alloc_consistent not __get_free_pages.
+custom code to subdivide pages returned by dma_alloc_coherent,
+or you can use the dma_pool API to do that.  A dma_pool is like
+a kmem_cache, but it uses dma_alloc_coherent not __get_free_pages.
 Also, it understands common hardware constraints for alignment,
 like queue heads needing to be aligned on N byte boundaries.
 
-Create a pci_pool like this:
+Create a dma_pool like this:
 
-	struct pci_pool *pool;
+	struct dma_pool *pool;
 
-	pool = pci_pool_create(name, pdev, size, align, alloc);
+	pool = dma_pool_create(name, dev, size, align, alloc);
 
-The "name" is for diagnostics (like a kmem_cache name); pdev and size
+The "name" is for diagnostics (like a kmem_cache name); dev and size
 are as above.  The device's hardware alignment requirement for this
 type of data is "align" (which is expressed in bytes, and must be a
 power of two).  If your device has no boundary crossing restrictions,
 pass 0 for alloc; passing 4096 says memory allocated from this pool
 must not cross 4KByte boundaries (but at that time it may be better to
-go for pci_alloc_consistent directly instead).
+go for dma_alloc_coherent directly instead).
 
-Allocate memory from a pci pool like this:
+Allocate memory from a dma pool like this:
 
-	cpu_addr = pci_pool_alloc(pool, flags, &dma_handle);
+	cpu_addr = dma_pool_alloc(pool, flags, &dma_handle);
 
 flags are SLAB_KERNEL if blocking is permitted (not in_interrupt nor
-holding SMP locks), SLAB_ATOMIC otherwise.  Like pci_alloc_consistent,
+holding SMP locks), SLAB_ATOMIC otherwise.  Like dma_alloc_coherent,
 this returns two values, cpu_addr and dma_handle.
 
-Free memory that was allocated from a pci_pool like this:
+Free memory that was allocated from a dma_pool like this:
 
-	pci_pool_free(pool, cpu_addr, dma_handle);
+	dma_pool_free(pool, cpu_addr, dma_handle);
 
-where pool is what you passed to pci_pool_alloc, and cpu_addr and
-dma_handle are the values pci_pool_alloc returned. This function
+where pool is what you passed to dma_pool_alloc, and cpu_addr and
+dma_handle are the values dma_pool_alloc returned. This function
 may be called in interrupt context.
 
-Destroy a pci_pool by calling:
+Destroy a dma_pool by calling:
 
-	pci_pool_destroy(pool);
+	dma_pool_destroy(pool);
 
-Make sure you've called pci_pool_free for all memory allocated
+Make sure you've called dma_pool_free for all memory allocated
 from a pool before you destroy the pool. This function may not
 be called in interrupt context.
 
@@ -411,15 +406,15 @@
 take a DMA direction argument, which is an integer and takes on
 one of the following values:
 
- PCI_DMA_BIDIRECTIONAL
- PCI_DMA_TODEVICE
- PCI_DMA_FROMDEVICE
- PCI_DMA_NONE
+ DMA_BIDIRECTIONAL
+ DMA_TO_DEVICE
+ DMA_FROM_DEVICE
+ DMA_NONE
 
 One should provide the exact DMA direction if you know it.
 
-PCI_DMA_TODEVICE means "from main memory to the PCI device"
-PCI_DMA_FROMDEVICE means "from the PCI device to main memory"
+DMA_TO_DEVICE means "from main memory to the device"
+DMA_FROM_DEVICE means "from the device to main memory"
 It is the direction in which the data moves during the DMA
 transfer.
 
@@ -427,12 +422,12 @@
 as you possibly can.
 
 If you absolutely cannot know the direction of the DMA transfer,
-specify PCI_DMA_BIDIRECTIONAL.  It means that the DMA can go in
+specify DMA_BIDIRECTIONAL.  It means that the DMA can go in
 either direction.  The platform guarantees that you may legally
 specify this, and that it will work, but this may be at the
 cost of performance for example.
 
-The value PCI_DMA_NONE is to be used for debugging.  One can
+The value DMA_NONE is to be used for debugging.  One can
 hold this in a data structure before you come to know the
 precise direction, and this will help catch cases where your
 direction tracking logic has failed to set things up properly.
@@ -442,21 +437,21 @@
 Some platforms actually have a write permission boolean which DMA
 mappings can be marked with, much like page protections in the user
 program address space.  Such platforms can and do report errors in the
-kernel logs when the PCI controller hardware detects violation of the
+kernel logs when the DMA controller hardware detects violation of the
 permission setting.
 
 Only streaming mappings specify a direction, consistent mappings
 implicitly have a direction attribute setting of
-PCI_DMA_BIDIRECTIONAL.
+DMA_BIDIRECTIONAL.
 
 The SCSI subsystem tells you the direction to use in the
 'sc_data_direction' member of the SCSI command your driver is
 working on.
 
 For Networking drivers, it's a rather simple affair.  For transmit
-packets, map/unmap them with the PCI_DMA_TODEVICE direction
+packets, map/unmap them with the DMA_TO_DEVICE direction
 specifier.  For receive packets, just the opposite, map/unmap them
-with the PCI_DMA_FROMDEVICE direction specifier.
+with the DMA_FROM_DEVICE direction specifier.
 
 		  Using Streaming DMA mappings
 
@@ -467,43 +462,43 @@
 
 To map a single region, you do:
 
-	struct pci_dev *pdev = mydev->pdev;
+	struct device *dev = &my_dev->dev;
 	dma_addr_t dma_handle;
 	void *addr = buffer->ptr;
 	size_t size = buffer->len;
 
-	dma_handle = pci_map_single(pdev, addr, size, direction);
+	dma_handle = dma_map_single(dev, addr, size, direction);
 
 and to unmap it:
 
-	pci_unmap_single(pdev, dma_handle, size, direction);
+	dma_unmap_single(dev, dma_handle, size, direction);
 
-You should call pci_unmap_single when the DMA activity is finished, e.g.
+You should call dma_unmap_single when the DMA activity is finished, e.g.
 from the interrupt which told you that the DMA transfer is done.
 
 Using cpu pointers like this for single mappings has a disadvantage,
 you cannot reference HIGHMEM memory in this way.  Thus, there is a
-map/unmap interface pair akin to pci_{map,unmap}_single.  These
+map/unmap interface pair akin to dma_{map,unmap}_single.  These
 interfaces deal with page/offset pairs instead of cpu pointers.
 Specifically:
 
-	struct pci_dev *pdev = mydev->pdev;
+	struct device *dev = &my_dev->dev;
 	dma_addr_t dma_handle;
 	struct page *page = buffer->page;
 	unsigned long offset = buffer->offset;
 	size_t size = buffer->len;
 
-	dma_handle = pci_map_page(pdev, page, offset, size, direction);
+	dma_handle = dma_map_page(dev, page, offset, size, direction);
 
 	...
 
-	pci_unmap_page(pdev, dma_handle, size, direction);
+	dma_unmap_page(dev, dma_handle, size, direction);
 
 Here, "offset" means byte offset within the given page.
 
 With scatterlists, you map a region gathered from several regions by:
 
-	int i, count = pci_map_sg(pdev, sglist, nents, direction);
+	int i, count = dma_map_sg(dev, sglist, nents, direction);
 	struct scatterlist *sg;
 
 	for_each_sg(sglist, sg, count, i) {
@@ -527,16 +522,16 @@
 
 To unmap a scatterlist, just call:
 
-	pci_unmap_sg(pdev, sglist, nents, direction);
+	dma_unmap_sg(dev, sglist, nents, direction);
 
 Again, make sure DMA activity has already finished.
 
-PLEASE NOTE:  The 'nents' argument to the pci_unmap_sg call must be
-              the _same_ one you passed into the pci_map_sg call,
+PLEASE NOTE:  The 'nents' argument to the dma_unmap_sg call must be
+              the _same_ one you passed into the dma_map_sg call,
 	      it should _NOT_ be the 'count' value _returned_ from the
-              pci_map_sg call.
+              dma_map_sg call.
 
-Every pci_map_{single,sg} call should have its pci_unmap_{single,sg}
+Every dma_map_{single,sg} call should have its dma_unmap_{single,sg}
 counterpart, because the bus address space is a shared resource (although
 in some ports the mapping is per each BUS so less devices contend for the
 same bus address space) and you could render the machine unusable by eating
@@ -547,14 +542,14 @@
 properly in order for the cpu and device to see the most uptodate and
 correct copy of the DMA buffer.
 
-So, firstly, just map it with pci_map_{single,sg}, and after each DMA
+So, firstly, just map it with dma_map_{single,sg}, and after each DMA
 transfer call either:
 
-	pci_dma_sync_single_for_cpu(pdev, dma_handle, size, direction);
+	dma_sync_single_for_cpu(dev, dma_handle, size, direction);
 
 or:
 
-	pci_dma_sync_sg_for_cpu(pdev, sglist, nents, direction);
+	dma_sync_sg_for_cpu(dev, sglist, nents, direction);
 
 as appropriate.
 
@@ -562,27 +557,27 @@
 finish accessing the data with the cpu, and then before actually
 giving the buffer to the hardware call either:
 
-	pci_dma_sync_single_for_device(pdev, dma_handle, size, direction);
+	dma_sync_single_for_device(dev, dma_handle, size, direction);
 
 or:
 
-	pci_dma_sync_sg_for_device(dev, sglist, nents, direction);
+	dma_sync_sg_for_device(dev, sglist, nents, direction);
 
 as appropriate.
 
 After the last DMA transfer call one of the DMA unmap routines
-pci_unmap_{single,sg}. If you don't touch the data from the first pci_map_*
-call till pci_unmap_*, then you don't have to call the pci_dma_sync_*
+dma_unmap_{single,sg}. If you don't touch the data from the first dma_map_*
+call till dma_unmap_*, then you don't have to call the dma_sync_*
 routines at all.
 
 Here is pseudo code which shows a situation in which you would need
-to use the pci_dma_sync_*() interfaces.
+to use the dma_sync_*() interfaces.
 
 	my_card_setup_receive_buffer(struct my_card *cp, char *buffer, int len)
 	{
 		dma_addr_t mapping;
 
-		mapping = pci_map_single(cp->pdev, buffer, len, PCI_DMA_FROMDEVICE);
+		mapping = dma_map_single(cp->dev, buffer, len, DMA_FROM_DEVICE);
 
 		cp->rx_buf = buffer;
 		cp->rx_len = len;
@@ -606,25 +601,25 @@
 			 * the DMA transfer with the CPU first
 			 * so that we see updated contents.
 			 */
-			pci_dma_sync_single_for_cpu(cp->pdev, cp->rx_dma,
-						    cp->rx_len,
-						    PCI_DMA_FROMDEVICE);
+			dma_sync_single_for_cpu(&cp->dev, cp->rx_dma,
+						cp->rx_len,
+						DMA_FROM_DEVICE);
 
 			/* Now it is safe to examine the buffer. */
 			hp = (struct my_card_header *) cp->rx_buf;
 			if (header_is_ok(hp)) {
-				pci_unmap_single(cp->pdev, cp->rx_dma, cp->rx_len,
-						 PCI_DMA_FROMDEVICE);
+				dma_unmap_single(&cp->dev, cp->rx_dma, cp->rx_len,
+						 DMA_FROM_DEVICE);
 				pass_to_upper_layers(cp->rx_buf);
 				make_and_setup_new_rx_buf(cp);
 			} else {
 				/* Just sync the buffer and give it back
 				 * to the card.
 				 */
-				pci_dma_sync_single_for_device(cp->pdev,
-							       cp->rx_dma,
-							       cp->rx_len,
-							       PCI_DMA_FROMDEVICE);
+				dma_sync_single_for_device(&cp->dev,
+							   cp->rx_dma,
+							   cp->rx_len,
+							   DMA_FROM_DEVICE);
 				give_rx_buf_to_card(cp);
 			}
 		}
@@ -634,19 +629,19 @@
 longer, nor should they use bus_to_virt. Some drivers have to be changed a
 little bit, because there is no longer an equivalent to bus_to_virt in the
 dynamic DMA mapping scheme - you have to always store the DMA addresses
-returned by the pci_alloc_consistent, pci_pool_alloc, and pci_map_single
-calls (pci_map_sg stores them in the scatterlist itself if the platform
+returned by the dma_alloc_coherent, dma_pool_alloc, and dma_map_single
+calls (dma_map_sg stores them in the scatterlist itself if the platform
 supports dynamic DMA mapping in hardware) in your driver structures and/or
 in the card registers.
 
-All PCI drivers should be using these interfaces with no exceptions.
-It is planned to completely remove virt_to_bus() and bus_to_virt() as
+All drivers should be using these interfaces with no exceptions.  It
+is planned to completely remove virt_to_bus() and bus_to_virt() as
 they are entirely deprecated.  Some ports already do not provide these
 as it is impossible to correctly support them.
 
 		Optimizing Unmap State Space Consumption
 
-On many platforms, pci_unmap_{single,page}() is simply a nop.
+On many platforms, dma_unmap_{single,page}() is simply a nop.
 Therefore, keeping track of the mapping address and length is a waste
 of space.  Instead of filling your drivers up with ifdefs and the like
 to "work around" this (which would defeat the whole purpose of a
@@ -655,7 +650,7 @@
 Actually, instead of describing the macros one by one, we'll
 transform some example code.
 
-1) Use DECLARE_PCI_UNMAP_{ADDR,LEN} in state saving structures.
+1) Use DEFINE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
    Example, before:
 
 	struct ring_state {
@@ -668,14 +663,11 @@
 
 	struct ring_state {
 		struct sk_buff *skb;
-		DECLARE_PCI_UNMAP_ADDR(mapping)
-		DECLARE_PCI_UNMAP_LEN(len)
+		DEFINE_DMA_UNMAP_ADDR(mapping);
+		DEFINE_DMA_UNMAP_LEN(len);
 	};
 
-   NOTE: DO NOT put a semicolon at the end of the DECLARE_*()
-         macro.
-
-2) Use pci_unmap_{addr,len}_set to set these values.
+2) Use dma_unmap_{addr,len}_set to set these values.
    Example, before:
 
 	ringp->mapping = FOO;
@@ -683,21 +675,21 @@
 
    after:
 
-	pci_unmap_addr_set(ringp, mapping, FOO);
-	pci_unmap_len_set(ringp, len, BAR);
+	dma_unmap_addr_set(ringp, mapping, FOO);
+	dma_unmap_len_set(ringp, len, BAR);
 
-3) Use pci_unmap_{addr,len} to access these values.
+3) Use dma_unmap_{addr,len} to access these values.
    Example, before:
 
-	pci_unmap_single(pdev, ringp->mapping, ringp->len,
-			 PCI_DMA_FROMDEVICE);
+	dma_unmap_single(dev, ringp->mapping, ringp->len,
+			 DMA_FROM_DEVICE);
 
    after:
 
-	pci_unmap_single(pdev,
-			 pci_unmap_addr(ringp, mapping),
-			 pci_unmap_len(ringp, len),
-			 PCI_DMA_FROMDEVICE);
+	dma_unmap_single(dev,
+			 dma_unmap_addr(ringp, mapping),
+			 dma_unmap_len(ringp, len),
+			 DMA_FROM_DEVICE);
 
 It really should be self-explanatory.  We treat the ADDR and LEN
 separately, because it is possible for an implementation to only
@@ -732,15 +724,15 @@
 DMA address space is limited on some architectures and an allocation
 failure can be determined by:
 
-- checking if pci_alloc_consistent returns NULL or pci_map_sg returns 0
+- checking if dma_alloc_coherent returns NULL or dma_map_sg returns 0
 
-- checking the returned dma_addr_t of pci_map_single and pci_map_page
-  by using pci_dma_mapping_error():
+- checking the returned dma_addr_t of dma_map_single and dma_map_page
+  by using dma_mapping_error():
 
 	dma_addr_t dma_handle;
 
-	dma_handle = pci_map_single(pdev, addr, size, direction);
-	if (pci_dma_mapping_error(pdev, dma_handle)) {
+	dma_handle = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dev, dma_handle)) {
 		/*
 		 * reduce current DMA mapping usage,
 		 * delay and try again later or
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index 1053a56..8916ca4 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -9,10 +9,14 @@
 kernel patches.
 
 
-1: Builds cleanly with applicable or modified CONFIG options =y, =m, and
+1: If you use a facility then #include the file that defines/declares
+   that facility.  Don't depend on other header files pulling in ones
+   that you use.
+
+2: Builds cleanly with applicable or modified CONFIG options =y, =m, and
    =n.  No gcc warnings/errors, no linker warnings/errors.
 
-2: Passes allnoconfig, allmodconfig
+2b: Passes allnoconfig, allmodconfig
 
 3: Builds on multiple CPU architectures by using local cross-compile tools
    or some other build farm.
diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
index 76b3a11..fa968aa 100644
--- a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
+++ b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
@@ -14,8 +14,8 @@
  how the clocks are arranged. The first implementation used as single
  PLL to feed the ARM, memory and peripherals via a series of dividers
  and muxes and this is the implementation that is documented here. A
- newer version where there is a seperate PLL and clock divider for the
- ARM core is available as a seperate driver.
+ newer version where there is a separate PLL and clock divider for the
+ ARM core is available as a separate driver.
 
 
 Layout
diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
new file mode 100644
index 0000000..7cced1f
--- /dev/null
+++ b/Documentation/arm/Samsung/Overview.txt
@@ -0,0 +1,86 @@
+		Samsung ARM Linux Overview
+		==========================
+
+Introduction
+------------
+
+  The Samsung range of ARM SoCs spans many similar devices, from the initial
+  ARM9 through to the newest ARM cores. This document shows an overview of
+  the current kernel support, how to use it and where to find the code
+  that supports this.
+
+  The currently supported SoCs are:
+
+  - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
+  - S3C64XX: S3C6400 and S3C6410
+  - S5PC6440
+
+  S5PC100 and S5PC110 support is currently being merged
+
+
+S3C24XX Systems
+---------------
+
+  There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which
+  deals with the architecture and drivers specific to these devices.
+
+  See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
+  on the implementation details and specific support.
+
+
+Configuration
+-------------
+
+  A number of configurations are supplied, as there is no current way of
+  unifying all the SoCs into one kernel.
+
+  s5p6440_defconfig - S5P6440 specific default configuration
+  s5pc100_defconfig - S5PC100 specific default configuration
+
+
+Layout
+------
+
+  The directory layout is currently being restructured, and consists of
+  several platform directories and then the machine specific directories
+  of the CPUs being built for.
+
+  plat-samsung provides the base for all the implementations, and is the
+  last in the line of include directories that are processed for the build
+  specific information. It contains the base clock, GPIO and device definitions
+  to get the system running.
+
+  plat-s3c is the s3c24xx/s3c64xx platform directory, although it is currently
+  involved in other builds this will be phased out once the relevant code is
+  moved elsewhere.
+
+  plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
+
+  plat-s3c64xx is for the s3c64xx specific bits, see the S3C24XX docs.
+
+  plat-s5p is for s5p specific builds, more to be added.
+
+
+  [ to finish ]
+
+
+Port Contributors
+-----------------
+
+  Ben Dooks (BJD)
+  Vincent Sanders
+  Herbert Potzl
+  Arnaud Patard (RTP)
+  Roc Wu
+  Klaus Fetscher
+  Dimitry Andric
+  Shannon Holland
+  Guillaume Gourat (NexVision)
+  Christer Weinigel (wingel) (Acer N30)
+  Lucas Correia Villa Real (S3C2400 port)
+
+
+Document Author
+---------------
+
+Copyright 2009-2010 Ben Dooks <ben-linux@fluff.org>
diff --git a/Documentation/arm/Samsung/clksrc-change-registers.awk b/Documentation/arm/Samsung/clksrc-change-registers.awk
new file mode 100755
index 0000000..0c50220
--- /dev/null
+++ b/Documentation/arm/Samsung/clksrc-change-registers.awk
@@ -0,0 +1,167 @@
+#!/usr/bin/awk -f
+#
+# Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+#
+# Released under GPLv2
+
+# example usage
+# ./clksrc-change-registers.awk arch/arm/plat-s5pc1xx/include/plat/regs-clock.h < src > dst
+
+function extract_value(s)
+{
+    eqat = index(s, "=")
+    comat = index(s, ",")
+    return substr(s, eqat+2, (comat-eqat)-2)
+}
+
+function remove_brackets(b)
+{
+    return substr(b, 2, length(b)-2)
+}
+
+function splitdefine(l, p)
+{
+    r = split(l, tp)
+
+    p[0] = tp[2]
+    p[1] = remove_brackets(tp[3])
+}
+
+function find_length(f)
+{
+    if (0)
+	printf "find_length " f "\n" > "/dev/stderr"
+
+    if (f ~ /0x1/)
+	return 1
+    else if (f ~ /0x3/)
+	return 2
+    else if (f ~ /0x7/)
+	return 3
+    else if (f ~ /0xf/)
+	return 4
+
+    printf "unknown legnth " f "\n" > "/dev/stderr"
+    exit
+}
+
+function find_shift(s)
+{
+    id = index(s, "<")
+    if (id <= 0) {
+	printf "cannot find shift " s "\n" > "/dev/stderr"
+	exit
+    }
+
+    return substr(s, id+2)
+}
+
+
+BEGIN {
+    if (ARGC < 2) {
+	print "too few arguments" > "/dev/stderr"
+	exit
+    }
+
+# read the header file and find the mask values that we will need
+# to replace and create an associative array of values
+
+    while (getline line < ARGV[1] > 0) {
+	if (line ~ /\#define.*_MASK/ &&
+	    !(line ~ /S5PC100_EPLL_MASK/) &&
+	    !(line ~ /USB_SIG_MASK/)) {
+	    splitdefine(line, fields)
+	    name = fields[0]
+	    if (0)
+		printf "MASK " line "\n" > "/dev/stderr"
+	    dmask[name,0] = find_length(fields[1])
+	    dmask[name,1] = find_shift(fields[1])
+	    if (0)
+		printf "=> '" name "' LENGTH=" dmask[name,0] " SHIFT=" dmask[name,1] "\n" > "/dev/stderr"
+	} else {
+	}
+    }
+
+    delete ARGV[1]
+}
+
+/clksrc_clk.*=.*{/ {
+    shift=""
+    mask=""
+    divshift=""
+    reg_div=""
+    reg_src=""
+    indent=1
+
+    print $0
+
+    for(; indent >= 1;) {
+	if ((getline line) <= 0) {
+	    printf "unexpected end of file" > "/dev/stderr"
+	    exit 1;
+	}
+
+	if (line ~ /\.shift/) {
+	    shift = extract_value(line)
+	} else if (line ~ /\.mask/) {
+	    mask = extract_value(line)
+	} else if (line ~ /\.reg_divider/) {
+	    reg_div = extract_value(line)
+	} else if (line ~ /\.reg_source/) {
+	    reg_src = extract_value(line)
+	} else if (line ~ /\.divider_shift/) {
+	    divshift = extract_value(line)
+	} else if (line ~ /{/) {
+		indent++
+		print line
+	    } else if (line ~ /}/) {
+	    indent--
+
+	    if (indent == 0) {
+		if (0) {
+		    printf "shift '" shift   "' ='" dmask[shift,0] "'\n" > "/dev/stderr"
+		    printf "mask  '" mask    "'\n" > "/dev/stderr"
+		    printf "dshft '" divshift "'\n" > "/dev/stderr"
+		    printf "rdiv  '" reg_div "'\n" > "/dev/stderr"
+		    printf "rsrc  '" reg_src "'\n" > "/dev/stderr"
+		}
+
+		generated = mask
+		sub(reg_src, reg_div, generated)
+
+		if (0) {
+		    printf "/* rsrc " reg_src " */\n"
+		    printf "/* rdiv " reg_div " */\n"
+		    printf "/* shift " shift " */\n"
+		    printf "/* mask " mask " */\n"
+		    printf "/* generated " generated " */\n"
+		}
+
+		if (reg_div != "") {
+		    printf "\t.reg_div = { "
+		    printf ".reg = " reg_div ", "
+		    printf ".shift = " dmask[generated,1] ", "
+		    printf ".size = " dmask[generated,0] ", "
+		    printf "},\n"
+		}
+
+		printf "\t.reg_src = { "
+		printf ".reg = " reg_src ", "
+		printf ".shift = " dmask[mask,1] ", "
+		printf ".size = " dmask[mask,0] ", "
+
+		printf "},\n"
+
+	    }
+
+	    print line
+	} else {
+	    print line
+	}
+
+	if (0)
+	    printf indent ":" line "\n" > "/dev/stderr"
+    }
+}
+
+// && ! /clksrc_clk.*=.*{/ { print $0 }
diff --git a/Documentation/cgroups/cgroup_event_listener.c b/Documentation/cgroups/cgroup_event_listener.c
new file mode 100644
index 0000000..8c2bfc4
--- /dev/null
+++ b/Documentation/cgroups/cgroup_event_listener.c
@@ -0,0 +1,110 @@
+/*
+ * cgroup_event_listener.c - Simple listener of cgroup events
+ *
+ * Copyright (C) Kirill A. Shutemov <kirill@shutemov.name>
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <libgen.h>
+#include <limits.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <sys/eventfd.h>
+
+#define USAGE_STR "Usage: cgroup_event_listener <path-to-control-file> <args>\n"
+
+int main(int argc, char **argv)
+{
+	int efd = -1;
+	int cfd = -1;
+	int event_control = -1;
+	char event_control_path[PATH_MAX];
+	char line[LINE_MAX];
+	int ret;
+
+	if (argc != 3) {
+		fputs(USAGE_STR, stderr);
+		return 1;
+	}
+
+	cfd = open(argv[1], O_RDONLY);
+	if (cfd == -1) {
+		fprintf(stderr, "Cannot open %s: %s\n", argv[1],
+				strerror(errno));
+		goto out;
+	}
+
+	ret = snprintf(event_control_path, PATH_MAX, "%s/cgroup.event_control",
+			dirname(argv[1]));
+	if (ret >= PATH_MAX) {
+		fputs("Path to cgroup.event_control is too long\n", stderr);
+		goto out;
+	}
+
+	event_control = open(event_control_path, O_WRONLY);
+	if (event_control == -1) {
+		fprintf(stderr, "Cannot open %s: %s\n", event_control_path,
+				strerror(errno));
+		goto out;
+	}
+
+	efd = eventfd(0, 0);
+	if (efd == -1) {
+		perror("eventfd() failed");
+		goto out;
+	}
+
+	ret = snprintf(line, LINE_MAX, "%d %d %s", efd, cfd, argv[2]);
+	if (ret >= LINE_MAX) {
+		fputs("Arguments string is too long\n", stderr);
+		goto out;
+	}
+
+	ret = write(event_control, line, strlen(line) + 1);
+	if (ret == -1) {
+		perror("Cannot write to cgroup.event_control");
+		goto out;
+	}
+
+	while (1) {
+		uint64_t result;
+
+		ret = read(efd, &result, sizeof(result));
+		if (ret == -1) {
+			if (errno == EINTR)
+				continue;
+			perror("Cannot read from eventfd");
+			break;
+		}
+		assert(ret == sizeof(result));
+
+		ret = access(event_control_path, W_OK);
+		if ((ret == -1) && (errno == ENOENT)) {
+				puts("The cgroup seems to have removed.");
+				ret = 0;
+				break;
+		}
+
+		if (ret == -1) {
+			perror("cgroup.event_control "
+					"is not accessable any more");
+			break;
+		}
+
+		printf("%s %s: crossed\n", argv[1], argv[2]);
+	}
+
+out:
+	if (efd >= 0)
+		close(efd);
+	if (event_control >= 0)
+		close(event_control);
+	if (cfd >= 0)
+		close(cfd);
+
+	return (ret != 0);
+}
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index 0b33bfe..fd588ff0 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -22,6 +22,8 @@
 2. Usage Examples and Syntax
   2.1 Basic Usage
   2.2 Attaching processes
+  2.3 Mounting hierarchies by name
+  2.4 Notification API
 3. Kernel API
   3.1 Overview
   3.2 Synchronization
@@ -434,6 +436,25 @@
 The name of the subsystem appears as part of the hierarchy description
 in /proc/mounts and /proc/<pid>/cgroups.
 
+2.4 Notification API
+--------------------
+
+There is mechanism which allows to get notifications about changing
+status of a cgroup.
+
+To register new notification handler you need:
+ - create a file descriptor for event notification using eventfd(2);
+ - open a control file to be monitored (e.g. memory.usage_in_bytes);
+ - write "<event_fd> <control_fd> <args>" to cgroup.event_control.
+   Interpretation of args is defined by control file implementation;
+
+eventfd will be woken up by control file implementation or when the
+cgroup is removed.
+
+To unregister notification handler just close eventfd.
+
+NOTE: Support of notifications should be implemented for the control
+file. See documentation for the subsystem.
 
 3. Kernel API
 =============
@@ -488,6 +509,11 @@
 - add an entry in linux/cgroup_subsys.h
 - define a cgroup_subsys object called <name>_subsys
 
+If a subsystem can be compiled as a module, it should also have in its
+module initcall a call to cgroup_load_subsys(), and in its exitcall a
+call to cgroup_unload_subsys(). It should also set its_subsys.module =
+THIS_MODULE in its .c file.
+
 Each subsystem may export the following methods. The only mandatory
 methods are create/destroy. Any others that are null are presumed to
 be successful no-ops.
@@ -536,10 +562,21 @@
 task is passed, then a successful result indicates that *any*
 unspecified task can be moved into the cgroup. Note that this isn't
 called on a fork. If this method returns 0 (success) then this should
-remain valid while the caller holds cgroup_mutex. If threadgroup is
+remain valid while the caller holds cgroup_mutex and it is ensured that either
+attach() or cancel_attach() will be called in future. If threadgroup is
 true, then a successful result indicates that all threads in the given
 thread's threadgroup can be moved together.
 
+void cancel_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
+	       struct task_struct *task, bool threadgroup)
+(cgroup_mutex held by caller)
+
+Called when a task attach operation has failed after can_attach() has succeeded.
+A subsystem whose can_attach() has some side-effects should provide this
+function, so that the subsytem can implement a rollback. If not, not necessary.
+This will be called only about subsystems whose can_attach() operation have
+succeeded.
+
 void attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
 	    struct cgroup *old_cgrp, struct task_struct *task,
 	    bool threadgroup)
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index 1d7e978..4160df8 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -168,20 +168,20 @@
 containing (on top of the standard cgroup files) the following
 files describing that cpuset:
 
- - cpus: list of CPUs in that cpuset
- - mems: list of Memory Nodes in that cpuset
- - memory_migrate flag: if set, move pages to cpusets nodes
- - cpu_exclusive flag: is cpu placement exclusive?
- - mem_exclusive flag: is memory placement exclusive?
- - mem_hardwall flag:  is memory allocation hardwalled
- - memory_pressure: measure of how much paging pressure in cpuset
- - memory_spread_page flag: if set, spread page cache evenly on allowed nodes
- - memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
- - sched_load_balance flag: if set, load balance within CPUs on that cpuset
- - sched_relax_domain_level: the searching range when migrating tasks
+ - cpuset.cpus: list of CPUs in that cpuset
+ - cpuset.mems: list of Memory Nodes in that cpuset
+ - cpuset.memory_migrate flag: if set, move pages to cpusets nodes
+ - cpuset.cpu_exclusive flag: is cpu placement exclusive?
+ - cpuset.mem_exclusive flag: is memory placement exclusive?
+ - cpuset.mem_hardwall flag:  is memory allocation hardwalled
+ - cpuset.memory_pressure: measure of how much paging pressure in cpuset
+ - cpuset.memory_spread_page flag: if set, spread page cache evenly on allowed nodes
+ - cpuset.memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
+ - cpuset.sched_load_balance flag: if set, load balance within CPUs on that cpuset
+ - cpuset.sched_relax_domain_level: the searching range when migrating tasks
 
 In addition, the root cpuset only has the following file:
- - memory_pressure_enabled flag: compute memory_pressure?
+ - cpuset.memory_pressure_enabled flag: compute memory_pressure?
 
 New cpusets are created using the mkdir system call or shell
 command.  The properties of a cpuset, such as its flags, allowed
@@ -229,7 +229,7 @@
 a direct ancestor or descendant, may share any of the same CPUs or
 Memory Nodes.
 
-A cpuset that is mem_exclusive *or* mem_hardwall is "hardwalled",
+A cpuset that is cpuset.mem_exclusive *or* cpuset.mem_hardwall is "hardwalled",
 i.e. it restricts kernel allocations for page, buffer and other data
 commonly shared by the kernel across multiple users.  All cpusets,
 whether hardwalled or not, restrict allocations of memory for user
@@ -304,15 +304,15 @@
 ---------------------------
 There are two boolean flag files per cpuset that control where the
 kernel allocates pages for the file system buffers and related in
-kernel data structures.  They are called 'memory_spread_page' and
-'memory_spread_slab'.
+kernel data structures.  They are called 'cpuset.memory_spread_page' and
+'cpuset.memory_spread_slab'.
 
-If the per-cpuset boolean flag file 'memory_spread_page' is set, then
+If the per-cpuset boolean flag file 'cpuset.memory_spread_page' is set, then
 the kernel will spread the file system buffers (page cache) evenly
 over all the nodes that the faulting task is allowed to use, instead
 of preferring to put those pages on the node where the task is running.
 
-If the per-cpuset boolean flag file 'memory_spread_slab' is set,
+If the per-cpuset boolean flag file 'cpuset.memory_spread_slab' is set,
 then the kernel will spread some file system related slab caches,
 such as for inodes and dentries evenly over all the nodes that the
 faulting task is allowed to use, instead of preferring to put those
@@ -337,21 +337,21 @@
 is turned off, then the currently specified NUMA mempolicy once again
 applies to memory page allocations.
 
-Both 'memory_spread_page' and 'memory_spread_slab' are boolean flag
+Both 'cpuset.memory_spread_page' and 'cpuset.memory_spread_slab' are boolean flag
 files.  By default they contain "0", meaning that the feature is off
 for that cpuset.  If a "1" is written to that file, then that turns
 the named feature on.
 
 The implementation is simple.
 
-Setting the flag 'memory_spread_page' turns on a per-process flag
+Setting the flag 'cpuset.memory_spread_page' turns on a per-process flag
 PF_SPREAD_PAGE for each task that is in that cpuset or subsequently
 joins that cpuset.  The page allocation calls for the page cache
 is modified to perform an inline check for this PF_SPREAD_PAGE task
 flag, and if set, a call to a new routine cpuset_mem_spread_node()
 returns the node to prefer for the allocation.
 
-Similarly, setting 'memory_spread_slab' turns on the flag
+Similarly, setting 'cpuset.memory_spread_slab' turns on the flag
 PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
 pages from the node returned by cpuset_mem_spread_node().
 
@@ -404,24 +404,24 @@
     system overhead on those CPUs, including avoiding task load
     balancing if that is not needed.
 
-When the per-cpuset flag "sched_load_balance" is enabled (the default
-setting), it requests that all the CPUs in that cpusets allowed 'cpus'
+When the per-cpuset flag "cpuset.sched_load_balance" is enabled (the default
+setting), it requests that all the CPUs in that cpusets allowed 'cpuset.cpus'
 be contained in a single sched domain, ensuring that load balancing
 can move a task (not otherwised pinned, as by sched_setaffinity)
 from any CPU in that cpuset to any other.
 
-When the per-cpuset flag "sched_load_balance" is disabled, then the
+When the per-cpuset flag "cpuset.sched_load_balance" is disabled, then the
 scheduler will avoid load balancing across the CPUs in that cpuset,
 --except-- in so far as is necessary because some overlapping cpuset
 has "sched_load_balance" enabled.
 
-So, for example, if the top cpuset has the flag "sched_load_balance"
+So, for example, if the top cpuset has the flag "cpuset.sched_load_balance"
 enabled, then the scheduler will have one sched domain covering all
-CPUs, and the setting of the "sched_load_balance" flag in any other
+CPUs, and the setting of the "cpuset.sched_load_balance" flag in any other
 cpusets won't matter, as we're already fully load balancing.
 
 Therefore in the above two situations, the top cpuset flag
-"sched_load_balance" should be disabled, and only some of the smaller,
+"cpuset.sched_load_balance" should be disabled, and only some of the smaller,
 child cpusets have this flag enabled.
 
 When doing this, you don't usually want to leave any unpinned tasks in
@@ -433,7 +433,7 @@
 task to that underused CPU.
 
 Of course, tasks pinned to a particular CPU can be left in a cpuset
-that disables "sched_load_balance" as those tasks aren't going anywhere
+that disables "cpuset.sched_load_balance" as those tasks aren't going anywhere
 else anyway.
 
 There is an impedance mismatch here, between cpusets and sched domains.
@@ -443,19 +443,19 @@
 It is necessary for sched domains to be flat because load balancing
 across partially overlapping sets of CPUs would risk unstable dynamics
 that would be beyond our understanding.  So if each of two partially
-overlapping cpusets enables the flag 'sched_load_balance', then we
+overlapping cpusets enables the flag 'cpuset.sched_load_balance', then we
 form a single sched domain that is a superset of both.  We won't move
 a task to a CPU outside it cpuset, but the scheduler load balancing
 code might waste some compute cycles considering that possibility.
 
 This mismatch is why there is not a simple one-to-one relation
-between which cpusets have the flag "sched_load_balance" enabled,
+between which cpusets have the flag "cpuset.sched_load_balance" enabled,
 and the sched domain configuration.  If a cpuset enables the flag, it
 will get balancing across all its CPUs, but if it disables the flag,
 it will only be assured of no load balancing if no other overlapping
 cpuset enables the flag.
 
-If two cpusets have partially overlapping 'cpus' allowed, and only
+If two cpusets have partially overlapping 'cpuset.cpus' allowed, and only
 one of them has this flag enabled, then the other may find its
 tasks only partially load balanced, just on the overlapping CPUs.
 This is just the general case of the top_cpuset example given a few
@@ -468,23 +468,23 @@
 1.7.1 sched_load_balance implementation details.
 ------------------------------------------------
 
-The per-cpuset flag 'sched_load_balance' defaults to enabled (contrary
+The per-cpuset flag 'cpuset.sched_load_balance' defaults to enabled (contrary
 to most cpuset flags.)  When enabled for a cpuset, the kernel will
 ensure that it can load balance across all the CPUs in that cpuset
 (makes sure that all the CPUs in the cpus_allowed of that cpuset are
 in the same sched domain.)
 
-If two overlapping cpusets both have 'sched_load_balance' enabled,
+If two overlapping cpusets both have 'cpuset.sched_load_balance' enabled,
 then they will be (must be) both in the same sched domain.
 
-If, as is the default, the top cpuset has 'sched_load_balance' enabled,
+If, as is the default, the top cpuset has 'cpuset.sched_load_balance' enabled,
 then by the above that means there is a single sched domain covering
 the whole system, regardless of any other cpuset settings.
 
 The kernel commits to user space that it will avoid load balancing
 where it can.  It will pick as fine a granularity partition of sched
 domains as it can while still providing load balancing for any set
-of CPUs allowed to a cpuset having 'sched_load_balance' enabled.
+of CPUs allowed to a cpuset having 'cpuset.sched_load_balance' enabled.
 
 The internal kernel cpuset to scheduler interface passes from the
 cpuset code to the scheduler code a partition of the load balanced
@@ -495,9 +495,9 @@
 The cpuset code builds a new such partition and passes it to the
 scheduler sched domain setup code, to have the sched domains rebuilt
 as necessary, whenever:
- - the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes,
+ - the 'cpuset.sched_load_balance' flag of a cpuset with non-empty CPUs changes,
  - or CPUs come or go from a cpuset with this flag enabled,
- - or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs
+ - or 'cpuset.sched_relax_domain_level' value of a cpuset with non-empty CPUs
    and with this flag enabled changes,
  - or a cpuset with non-empty CPUs and with this flag enabled is removed,
  - or a cpu is offlined/onlined.
@@ -542,7 +542,7 @@
 on the next tick.  For some applications in special situation, waiting
 1 tick may be too long.
 
-The 'sched_relax_domain_level' file allows you to request changing
+The 'cpuset.sched_relax_domain_level' file allows you to request changing
 this searching range as you like.  This file takes int value which
 indicates size of searching range in levels ideally as follows,
 otherwise initial value -1 that indicates the cpuset has no request.
@@ -559,8 +559,8 @@
 can be changed using the relax_domain_level= boot parameter.
 
 This file is per-cpuset and affect the sched domain where the cpuset
-belongs to.  Therefore if the flag 'sched_load_balance' of a cpuset
-is disabled, then 'sched_relax_domain_level' have no effect since
+belongs to.  Therefore if the flag 'cpuset.sched_load_balance' of a cpuset
+is disabled, then 'cpuset.sched_relax_domain_level' have no effect since
 there is no sched domain belonging the cpuset.
 
 If multiple cpusets are overlapping and hence they form a single sched
@@ -607,9 +607,9 @@
 memory placement, as above, the next time that the kernel attempts
 to allocate a page of memory for that task.
 
-If a cpuset has its 'cpus' modified, then each task in that cpuset
+If a cpuset has its 'cpuset.cpus' modified, then each task in that cpuset
 will have its allowed CPU placement changed immediately.  Similarly,
-if a tasks pid is written to another cpusets 'tasks' file, then its
+if a tasks pid is written to another cpusets 'cpuset.tasks' file, then its
 allowed CPU placement is changed immediately.  If such a task had been
 bound to some subset of its cpuset using the sched_setaffinity() call,
 the task will be allowed to run on any CPU allowed in its new cpuset,
@@ -622,8 +622,8 @@
 Normally, once a page is allocated (given a physical page
 of main memory) then that page stays on whatever node it
 was allocated, so long as it remains allocated, even if the
-cpusets memory placement policy 'mems' subsequently changes.
-If the cpuset flag file 'memory_migrate' is set true, then when
+cpusets memory placement policy 'cpuset.mems' subsequently changes.
+If the cpuset flag file 'cpuset.memory_migrate' is set true, then when
 tasks are attached to that cpuset, any pages that task had
 allocated to it on nodes in its previous cpuset are migrated
 to the tasks new cpuset. The relative placement of the page within
@@ -631,12 +631,12 @@
 For example if the page was on the second valid node of the prior cpuset
 then the page will be placed on the second valid node of the new cpuset.
 
-Also if 'memory_migrate' is set true, then if that cpusets
-'mems' file is modified, pages allocated to tasks in that
-cpuset, that were on nodes in the previous setting of 'mems',
+Also if 'cpuset.memory_migrate' is set true, then if that cpusets
+'cpuset.mems' file is modified, pages allocated to tasks in that
+cpuset, that were on nodes in the previous setting of 'cpuset.mems',
 will be moved to nodes in the new setting of 'mems.'
 Pages that were not in the tasks prior cpuset, or in the cpusets
-prior 'mems' setting, will not be moved.
+prior 'cpuset.mems' setting, will not be moved.
 
 There is an exception to the above.  If hotplug functionality is used
 to remove all the CPUs that are currently assigned to a cpuset,
@@ -678,8 +678,8 @@
   cd /dev/cpuset
   mkdir Charlie
   cd Charlie
-  /bin/echo 2-3 > cpus
-  /bin/echo 1 > mems
+  /bin/echo 2-3 > cpuset.cpus
+  /bin/echo 1 > cpuset.mems
   /bin/echo $$ > tasks
   sh
   # The subshell 'sh' is now running in cpuset Charlie
@@ -725,10 +725,13 @@
 
 In this directory you can find several files:
 # ls
-cpu_exclusive  memory_migrate      mems                      tasks
-cpus           memory_pressure     notify_on_release
-mem_exclusive  memory_spread_page  sched_load_balance
-mem_hardwall   memory_spread_slab  sched_relax_domain_level
+cpuset.cpu_exclusive       cpuset.memory_spread_slab
+cpuset.cpus                cpuset.mems
+cpuset.mem_exclusive       cpuset.sched_load_balance
+cpuset.mem_hardwall        cpuset.sched_relax_domain_level
+cpuset.memory_migrate      notify_on_release
+cpuset.memory_pressure     tasks
+cpuset.memory_spread_page
 
 Reading them will give you information about the state of this cpuset:
 the CPUs and Memory Nodes it can use, the processes that are using
@@ -736,13 +739,13 @@
 the cpuset.
 
 Set some flags:
-# /bin/echo 1 > cpu_exclusive
+# /bin/echo 1 > cpuset.cpu_exclusive
 
 Add some cpus:
-# /bin/echo 0-7 > cpus
+# /bin/echo 0-7 > cpuset.cpus
 
 Add some mems:
-# /bin/echo 0-7 > mems
+# /bin/echo 0-7 > cpuset.mems
 
 Now attach your shell to this cpuset:
 # /bin/echo $$ > tasks
@@ -774,28 +777,28 @@
 This is the syntax to use when writing in the cpus or mems files
 in cpuset directories:
 
-# /bin/echo 1-4 > cpus		-> set cpus list to cpus 1,2,3,4
-# /bin/echo 1,2,3,4 > cpus	-> set cpus list to cpus 1,2,3,4
+# /bin/echo 1-4 > cpuset.cpus		-> set cpus list to cpus 1,2,3,4
+# /bin/echo 1,2,3,4 > cpuset.cpus	-> set cpus list to cpus 1,2,3,4
 
 To add a CPU to a cpuset, write the new list of CPUs including the
 CPU to be added. To add 6 to the above cpuset:
 
-# /bin/echo 1-4,6 > cpus	-> set cpus list to cpus 1,2,3,4,6
+# /bin/echo 1-4,6 > cpuset.cpus	-> set cpus list to cpus 1,2,3,4,6
 
 Similarly to remove a CPU from a cpuset, write the new list of CPUs
 without the CPU to be removed.
 
 To remove all the CPUs:
 
-# /bin/echo "" > cpus		-> clear cpus list
+# /bin/echo "" > cpuset.cpus		-> clear cpus list
 
 2.3 Setting flags
 -----------------
 
 The syntax is very simple:
 
-# /bin/echo 1 > cpu_exclusive 	-> set flag 'cpu_exclusive'
-# /bin/echo 0 > cpu_exclusive 	-> unset flag 'cpu_exclusive'
+# /bin/echo 1 > cpuset.cpu_exclusive 	-> set flag 'cpuset.cpu_exclusive'
+# /bin/echo 0 > cpuset.cpu_exclusive 	-> unset flag 'cpuset.cpu_exclusive'
 
 2.4 Attaching processes
 -----------------------
diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt
index 72db89e..f7f68b2 100644
--- a/Documentation/cgroups/memcg_test.txt
+++ b/Documentation/cgroups/memcg_test.txt
@@ -1,6 +1,6 @@
 Memory Resource Controller(Memcg)  Implementation Memo.
-Last Updated: 2009/1/20
-Base Kernel Version: based on 2.6.29-rc2.
+Last Updated: 2010/2
+Base Kernel Version: based on 2.6.33-rc7-mm(candidate for 34).
 
 Because VM is getting complex (one of reasons is memcg...), memcg's behavior
 is complex. This is a document for memcg's internal behavior.
@@ -337,7 +337,7 @@
 	race and lock dependency with other cgroup subsystems.
 
 	example)
-	# mount -t cgroup none /cgroup -t cpuset,memory,cpu,devices
+	# mount -t cgroup none /cgroup -o cpuset,memory,cpu,devices
 
 	and do task move, mkdir, rmdir etc...under this.
 
@@ -348,7 +348,7 @@
 
 	For example, test like following is good.
 	(Shell-A)
-	# mount -t cgroup none /cgroup -t memory
+	# mount -t cgroup none /cgroup -o memory
 	# mkdir /cgroup/test
 	# echo 40M > /cgroup/test/memory.limit_in_bytes
 	# echo 0 > /cgroup/test/tasks
@@ -378,3 +378,42 @@
 	#echo 50M > memory.limit_in_bytes
 	#echo 50M > memory.memsw.limit_in_bytes
 	run 51M of malloc
+
+ 9.9 Move charges at task migration
+	Charges associated with a task can be moved along with task migration.
+
+	(Shell-A)
+	#mkdir /cgroup/A
+	#echo $$ >/cgroup/A/tasks
+	run some programs which uses some amount of memory in /cgroup/A.
+
+	(Shell-B)
+	#mkdir /cgroup/B
+	#echo 1 >/cgroup/B/memory.move_charge_at_immigrate
+	#echo "pid of the program running in group A" >/cgroup/B/tasks
+
+	You can see charges have been moved by reading *.usage_in_bytes or
+	memory.stat of both A and B.
+	See 8.2 of Documentation/cgroups/memory.txt to see what value should be
+	written to move_charge_at_immigrate.
+
+ 9.10 Memory thresholds
+	Memory controler implements memory thresholds using cgroups notification
+	API. You can use Documentation/cgroups/cgroup_event_listener.c to test
+	it.
+
+	(Shell-A) Create cgroup and run event listener
+	# mkdir /cgroup/A
+	# ./cgroup_event_listener /cgroup/A/memory.usage_in_bytes 5M
+
+	(Shell-B) Add task to cgroup and try to allocate and free memory
+	# echo $$ >/cgroup/A/tasks
+	# a="$(dd if=/dev/zero bs=1M count=10)"
+	# a=
+
+	You will see message from cgroup_event_listener every time you cross
+	the thresholds.
+
+	Use /cgroup/A/memory.memsw.usage_in_bytes to test memsw thresholds.
+
+	It's good idea to test root cgroup as well.
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index b871f255..f8bc802 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -182,6 +182,8 @@
 NOTE: Reclaim does not work for the root cgroup, since we cannot set any
 limits on the root cgroup.
 
+Note2: When panic_on_oom is set to "2", the whole system will panic.
+
 2. Locking
 
 The memory controller uses the following hierarchy
@@ -262,10 +264,12 @@
 4.2 Task migration
 
 When a task migrates from one cgroup to another, it's charge is not
-carried forward. The pages allocated from the original cgroup still
+carried forward by default. The pages allocated from the original cgroup still
 remain charged to it, the charge is dropped when the page is freed or
 reclaimed.
 
+Note: You can move charges of a task along with task migration. See 8.
+
 4.3 Removing a cgroup
 
 A cgroup can be removed by rmdir, but as discussed in sections 4.1 and 4.2, a
@@ -377,7 +381,8 @@
 NOTE1: Enabling/disabling will fail if the cgroup already has other
 cgroups created below it.
 
-NOTE2: This feature can be enabled/disabled per subtree.
+NOTE2: When panic_on_oom is set to "2", the whole system will panic in
+case of an oom event in any cgroup.
 
 7. Soft limits
 
@@ -414,7 +419,76 @@
 NOTE2: It is recommended to set the soft limit always below the hard limit,
        otherwise the hard limit will take precedence.
 
-8. TODO
+8. Move charges at task migration
+
+Users can move charges associated with a task along with task migration, that
+is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
+This feature is not supported in !CONFIG_MMU environments because of lack of
+page tables.
+
+8.1 Interface
+
+This feature is disabled by default. It can be enabled(and disabled again) by
+writing to memory.move_charge_at_immigrate of the destination cgroup.
+
+If you want to enable it:
+
+# echo (some positive value) > memory.move_charge_at_immigrate
+
+Note: Each bits of move_charge_at_immigrate has its own meaning about what type
+      of charges should be moved. See 8.2 for details.
+Note: Charges are moved only when you move mm->owner, IOW, a leader of a thread
+      group.
+Note: If we cannot find enough space for the task in the destination cgroup, we
+      try to make space by reclaiming memory. Task migration may fail if we
+      cannot make enough space.
+Note: It can take several seconds if you move charges in giga bytes order.
+
+And if you want disable it again:
+
+# echo 0 > memory.move_charge_at_immigrate
+
+8.2 Type of charges which can be move
+
+Each bits of move_charge_at_immigrate has its own meaning about what type of
+charges should be moved.
+
+  bit | what type of charges would be moved ?
+ -----+------------------------------------------------------------------------
+   0  | A charge of an anonymous page(or swap of it) used by the target task.
+      | Those pages and swaps must be used only by the target task. You must
+      | enable Swap Extension(see 2.4) to enable move of swap charges.
+
+Note: Those pages and swaps must be charged to the old cgroup.
+Note: More type of pages(e.g. file cache, shmem,) will be supported by other
+      bits in future.
+
+8.3 TODO
+
+- Add support for other types of pages(e.g. file cache, shmem, etc.).
+- Implement madvise(2) to let users decide the vma to be moved or not to be
+  moved.
+- All of moving charge operations are done under cgroup_mutex. It's not good
+  behavior to hold the mutex too long, so we may need some trick.
+
+9. Memory thresholds
+
+Memory controler implements memory thresholds using cgroups notification
+API (see cgroups.txt). It allows to register multiple memory and memsw
+thresholds and gets notifications when it crosses.
+
+To register a threshold application need:
+ - create an eventfd using eventfd(2);
+ - open memory.usage_in_bytes or memory.memsw.usage_in_bytes;
+ - write string like "<event_fd> <memory.usage_in_bytes> <threshold>" to
+   cgroup.event_control.
+
+Application will be notified through eventfd when memory usage crosses
+threshold in any direction.
+
+It's applicable for root and non-root cgroup.
+
+10. TODO
 
 1. Add support for accounting huge pages (as a separate controller)
 2. Make per-cgroup scanner reclaim not-shared pages first
diff --git a/Documentation/console/console.txt b/Documentation/console/console.txt
index 877a1b2..926cf1b 100644
--- a/Documentation/console/console.txt
+++ b/Documentation/console/console.txt
@@ -74,7 +74,7 @@
 hand, will bind the driver to the consoles that are currently occupied by a
 system driver.
 
-NOTE1: Binding and binding must be selected in Kconfig. It's under:
+NOTE1: Binding and unbinding must be selected in Kconfig. It's under:
 
 Device Drivers -> Character devices -> Support for binding and unbinding
 console drivers
diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt
index 2e2c2ea..41f4163 100644
--- a/Documentation/driver-model/platform.txt
+++ b/Documentation/driver-model/platform.txt
@@ -192,7 +192,7 @@
 User specified early platform devices will be registered at this point.
 For the early serial console case the user can specify port on the
 kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
-the class string, "serial" is the name of the platfrom driver and
+the class string, "serial" is the name of the platform driver and
 0 is the platform device id. If the id is -1 then the dot and the
 id can be omitted.
 
diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt
index 60e361b..f297fc1 100644
--- a/Documentation/eisa.txt
+++ b/Documentation/eisa.txt
@@ -171,7 +171,7 @@
 virtual_root.force_probe :
 
 Force the probing code to probe EISA slots even when it cannot find an
-EISA compliant mainboard (nothing appears on slot 0). Defaultd to 0
+EISA compliant mainboard (nothing appears on slot 0). Defaults to 0
 (don't force), and set to 1 (force probing) when either
 CONFIG_ALPHA_JENSEN or CONFIG_EISA_VLB_PRIMING are set.
 
diff --git a/Documentation/email-clients.txt b/Documentation/email-clients.txt
index a618efa..945ff3f 100644
--- a/Documentation/email-clients.txt
+++ b/Documentation/email-clients.txt
@@ -216,26 +216,14 @@
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Gmail (Web GUI)
 
-If you just have to use Gmail to send patches, it CAN be made to work.  It
-requires a bit of external help, though.
+Does not work for sending patches.
 
-The first problem is that Gmail converts tabs to spaces.  This will
-totally break your patches.  To prevent this, you have to use a different
-editor.  There is a firefox extension called "ViewSourceWith"
-(https://addons.mozilla.org/en-US/firefox/addon/394) which allows you to
-edit any text box in the editor of your choice.  Configure it to launch
-your favorite editor.  When you want to send a patch, use this technique.
-Once you have crafted your messsage + patch, save and exit the editor,
-which should reload the Gmail edit box.  GMAIL WILL PRESERVE THE TABS.
-Hoorah.  Apparently you can cut-n-paste literal tabs, but Gmail will
-convert those to spaces upon sending!
+Gmail web client converts tabs to spaces automatically.
 
-The second problem is that Gmail converts tabs to spaces on replies.  If
-you reply to a patch, don't expect to be able to apply it as a patch.
+At the same time it wraps lines every 78 chars with CRLF style line breaks
+although tab2space problem can be solved with external editor.
 
-The last problem is that Gmail will base64-encode any message that has a
-non-ASCII character.  That includes things like European names.  Be aware.
-
-Gmail is not convenient for lkml patches, but CAN be made to work.
+Another problem is that Gmail will base64-encode any message that has a
+non-ASCII character. That includes things like European names.
 
                                 ###
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index a5cc0db..ed511af 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -582,3 +582,10 @@
 Who:	Avi Kivity <avi@redhat.com>
 
 ----------------------------
+
+What: 	"acpi=ht" boot option
+When:	2.6.35
+Why:	Useful in 2003, implementation is a hack.
+	Generally invoked by accident today.
+	Seen as doing more harm than good.
+Who:	Len Brown <len.brown@intel.com>
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 5139b8c..3bae418 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -32,6 +32,8 @@
 	- info on the userspace interface to the OCFS2 DLM.
 dnotify.txt
 	- info about directory notification in Linux.
+dnotify_test.c
+	- example program for dnotify
 ecryptfs.txt
 	- docs on eCryptfs: stacked cryptographic filesystem for Linux.
 exofs.txt
diff --git a/Documentation/filesystems/Makefile b/Documentation/filesystems/Makefile
new file mode 100644
index 0000000..a5dd114
--- /dev/null
+++ b/Documentation/filesystems/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := dnotify_test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/filesystems/dnotify.txt b/Documentation/filesystems/dnotify.txt
index 9f5d338..6baf88f 100644
--- a/Documentation/filesystems/dnotify.txt
+++ b/Documentation/filesystems/dnotify.txt
@@ -62,38 +62,9 @@
 
 Example
 -------
+See Documentation/filesystems/dnotify_test.c for an example.
 
-	#define _GNU_SOURCE	/* needed to get the defines */
-	#include <fcntl.h>	/* in glibc 2.2 this has the needed
-					   values defined */
-	#include <signal.h>
-	#include <stdio.h>
-	#include <unistd.h>
-
-	static volatile int event_fd;
-
-	static void handler(int sig, siginfo_t *si, void *data)
-	{
-		event_fd = si->si_fd;
-	}
-
-	int main(void)
-	{
-		struct sigaction act;
-		int fd;
-
-		act.sa_sigaction = handler;
-		sigemptyset(&act.sa_mask);
-		act.sa_flags = SA_SIGINFO;
-		sigaction(SIGRTMIN + 1, &act, NULL);
-
-		fd = open(".", O_RDONLY);
-		fcntl(fd, F_SETSIG, SIGRTMIN + 1);
-		fcntl(fd, F_NOTIFY, DN_MODIFY|DN_CREATE|DN_MULTISHOT);
-		/* we will now be notified if any of the files
-		   in "." is modified or new files are created */
-		while (1) {
-			pause();
-			printf("Got event on fd=%d\n", event_fd);
-		}
-	}
+NOTE
+----
+Beginning with Linux 2.6.13, dnotify has been replaced by inotify.
+See Documentation/filesystems/inotify.txt for more information on it.
diff --git a/Documentation/filesystems/dnotify_test.c b/Documentation/filesystems/dnotify_test.c
new file mode 100644
index 0000000..8b37b4a
--- /dev/null
+++ b/Documentation/filesystems/dnotify_test.c
@@ -0,0 +1,34 @@
+#define _GNU_SOURCE	/* needed to get the defines */
+#include <fcntl.h>	/* in glibc 2.2 this has the needed
+				   values defined */
+#include <signal.h>
+#include <stdio.h>
+#include <unistd.h>
+
+static volatile int event_fd;
+
+static void handler(int sig, siginfo_t *si, void *data)
+{
+	event_fd = si->si_fd;
+}
+
+int main(void)
+{
+	struct sigaction act;
+	int fd;
+
+	act.sa_sigaction = handler;
+	sigemptyset(&act.sa_mask);
+	act.sa_flags = SA_SIGINFO;
+	sigaction(SIGRTMIN + 1, &act, NULL);
+
+	fd = open(".", O_RDONLY);
+	fcntl(fd, F_SETSIG, SIGRTMIN + 1);
+	fcntl(fd, F_NOTIFY, DN_MODIFY|DN_CREATE|DN_MULTISHOT);
+	/* we will now be notified if any of the files
+	   in "." is modified or new files are created */
+	while (1) {
+		pause();
+		printf("Got event on fd=%d\n", event_fd);
+	}
+}
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 96a44dd..a4f30fa 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -195,7 +195,7 @@
 snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
 It's slow but very precise.
 
-Table 1-2: Contents of the statm files (as of 2.6.30-rc7)
+Table 1-2: Contents of the status files (as of 2.6.30-rc7)
 ..............................................................................
  Field                       Content
  Name                        filename of the executable
diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru
index 87ffa0f..5eb3b9d 100644
--- a/Documentation/hwmon/abituguru
+++ b/Documentation/hwmon/abituguru
@@ -30,7 +30,7 @@
 	   bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
 	   You may also need to specify the fan_sensors option for these boards
 	   fan_sensors=5
-	2) There is a seperate abituguru3 driver for these motherboards,
+	2) There is a separate abituguru3 driver for these motherboards,
 	   the abituguru (without the 3 !) driver will not work on these
 	   motherboards (and visa versa)!
 
diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt
index 3a6aec4..8b4129d 100644
--- a/Documentation/input/rotary-encoder.txt
+++ b/Documentation/input/rotary-encoder.txt
@@ -75,7 +75,7 @@
 the configuration.
 
 Because GPIO to IRQ mapping is platform specific, this information must
-be given in seperately to the driver. See the example below.
+be given in separately to the driver. See the example below.
 
 ---------<snip>---------
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 3bc48b0..e4cbca5 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -200,10 +200,6 @@
 			acpi_display_output=video
 			See above.
 
-	acpi_early_pdc_eval	[HW,ACPI] Evaluate processor _PDC methods
-				early. Needed on some platforms to properly
-				initialize the EC.
-
 	acpi_irq_balance [HW,ACPI]
 			ACPI will balance active IRQs
 			default in APIC mode
diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index c79ab99..bdb1381 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -266,7 +266,7 @@
 
     struct kobj_type {
 	    void (*release)(struct kobject *);
-	    struct sysfs_ops	*sysfs_ops;
+	    const struct sysfs_ops *sysfs_ops;
 	    struct attribute	**default_attrs;
     };
 
diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX
index ee5692b..fa68853 100644
--- a/Documentation/laptops/00-INDEX
+++ b/Documentation/laptops/00-INDEX
@@ -2,6 +2,12 @@
 	- This file
 acer-wmi.txt
 	- information on the Acer Laptop WMI Extras driver.
+asus-laptop.txt
+	- information on the Asus Laptop Extras driver.
+disk-shock-protection.txt
+	- information on hard disk shock protection.
+dslm.c
+	- Simple Disk Sleep Monitor program
 laptop-mode.txt
 	- how to conserve battery power using laptop-mode.
 sony-laptop.txt
diff --git a/Documentation/laptops/Makefile b/Documentation/laptops/Makefile
new file mode 100644
index 0000000..5cb144a
--- /dev/null
+++ b/Documentation/laptops/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := dslm
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/laptops/dslm.c b/Documentation/laptops/dslm.c
new file mode 100644
index 0000000..72ff290
--- /dev/null
+++ b/Documentation/laptops/dslm.c
@@ -0,0 +1,166 @@
+/*
+ * dslm.c
+ * Simple Disk Sleep Monitor
+ *  by Bartek Kania
+ * Licenced under the GPL
+ */
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <time.h>
+#include <string.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <linux/hdreg.h>
+
+#ifdef DEBUG
+#define D(x) x
+#else
+#define D(x)
+#endif
+
+int endit = 0;
+
+/* Check if the disk is in powersave-mode
+ * Most of the code is stolen from hdparm.
+ * 1 = active, 0 = standby/sleep, -1 = unknown */
+static int check_powermode(int fd)
+{
+    unsigned char args[4] = {WIN_CHECKPOWERMODE1,0,0,0};
+    int state;
+
+    if (ioctl(fd, HDIO_DRIVE_CMD, &args)
+	&& (args[0] = WIN_CHECKPOWERMODE2) /* try again with 0x98 */
+	&& ioctl(fd, HDIO_DRIVE_CMD, &args)) {
+	if (errno != EIO || args[0] != 0 || args[1] != 0) {
+	    state = -1; /* "unknown"; */
+	} else
+	    state = 0; /* "sleeping"; */
+    } else {
+	state = (args[2] == 255) ? 1 : 0;
+    }
+    D(printf(" drive state is:  %d\n", state));
+
+    return state;
+}
+
+static char *state_name(int i)
+{
+    if (i == -1) return "unknown";
+    if (i == 0) return "sleeping";
+    if (i == 1) return "active";
+
+    return "internal error";
+}
+
+static char *myctime(time_t time)
+{
+    char *ts = ctime(&time);
+    ts[strlen(ts) - 1] = 0;
+
+    return ts;
+}
+
+static void measure(int fd)
+{
+    time_t start_time;
+    int last_state;
+    time_t last_time;
+    int curr_state;
+    time_t curr_time = 0;
+    time_t time_diff;
+    time_t active_time = 0;
+    time_t sleep_time = 0;
+    time_t unknown_time = 0;
+    time_t total_time = 0;
+    int changes = 0;
+    float tmp;
+
+    printf("Starting measurements\n");
+
+    last_state = check_powermode(fd);
+    start_time = last_time = time(0);
+    printf("  System is in state %s\n\n", state_name(last_state));
+
+    while(!endit) {
+	sleep(1);
+	curr_state = check_powermode(fd);
+
+	if (curr_state != last_state || endit) {
+	    changes++;
+	    curr_time = time(0);
+	    time_diff = curr_time - last_time;
+
+	    if (last_state == 1) active_time += time_diff;
+	    else if (last_state == 0) sleep_time += time_diff;
+	    else unknown_time += time_diff;
+
+	    last_state = curr_state;
+	    last_time = curr_time;
+
+	    printf("%s: State-change to %s\n", myctime(curr_time),
+		   state_name(curr_state));
+	}
+    }
+    changes--; /* Compensate for SIGINT */
+
+    total_time = time(0) - start_time;
+    printf("\nTotal running time:  %lus\n", curr_time - start_time);
+    printf(" State changed %d times\n", changes);
+
+    tmp = (float)sleep_time / (float)total_time * 100;
+    printf(" Time in sleep state:   %lus (%.2f%%)\n", sleep_time, tmp);
+    tmp = (float)active_time / (float)total_time * 100;
+    printf(" Time in active state:  %lus (%.2f%%)\n", active_time, tmp);
+    tmp = (float)unknown_time / (float)total_time * 100;
+    printf(" Time in unknown state: %lus (%.2f%%)\n", unknown_time, tmp);
+}
+
+static void ender(int s)
+{
+    endit = 1;
+}
+
+static void usage(void)
+{
+    puts("usage: dslm [-w <time>] <disk>");
+    exit(0);
+}
+
+int main(int argc, char **argv)
+{
+    int fd;
+    char *disk = 0;
+    int settle_time = 60;
+
+    /* Parse the simple command-line */
+    if (argc == 2)
+	disk = argv[1];
+    else if (argc == 4) {
+	settle_time = atoi(argv[2]);
+	disk = argv[3];
+    } else
+	usage();
+
+    if (!(fd = open(disk, O_RDONLY|O_NONBLOCK))) {
+	printf("Can't open %s, because: %s\n", disk, strerror(errno));
+	exit(-1);
+    }
+
+    if (settle_time) {
+	printf("Waiting %d seconds for the system to settle down to "
+	       "'normal'\n", settle_time);
+	sleep(settle_time);
+    } else
+	puts("Not waiting for system to settle down");
+
+    signal(SIGINT, ender);
+
+    measure(fd);
+
+    close(fd);
+
+    return 0;
+}
diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/laptops/laptop-mode.txt
index eeedee1..2c3c350 100644
--- a/Documentation/laptops/laptop-mode.txt
+++ b/Documentation/laptops/laptop-mode.txt
@@ -779,172 +779,4 @@
 ---------------
 
 Bartek Kania submitted this, it can be used to measure how much time your disk
-spends spun up/down.
-
----------------------------dslm.c BEGIN-----------------------------------------
-/*
- * Simple Disk Sleep Monitor
- *  by Bartek Kania
- * Licenced under the GPL
- */
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <time.h>
-#include <string.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-#include <linux/hdreg.h>
-
-#ifdef DEBUG
-#define D(x) x
-#else
-#define D(x)
-#endif
-
-int endit = 0;
-
-/* Check if the disk is in powersave-mode
- * Most of the code is stolen from hdparm.
- * 1 = active, 0 = standby/sleep, -1 = unknown */
-int check_powermode(int fd)
-{
-    unsigned char args[4] = {WIN_CHECKPOWERMODE1,0,0,0};
-    int state;
-
-    if (ioctl(fd, HDIO_DRIVE_CMD, &args)
-	&& (args[0] = WIN_CHECKPOWERMODE2) /* try again with 0x98 */
-	&& ioctl(fd, HDIO_DRIVE_CMD, &args)) {
-	if (errno != EIO || args[0] != 0 || args[1] != 0) {
-	    state = -1; /* "unknown"; */
-	} else
-	    state = 0; /* "sleeping"; */
-    } else {
-	state = (args[2] == 255) ? 1 : 0;
-    }
-    D(printf(" drive state is:  %d\n", state));
-
-    return state;
-}
-
-char *state_name(int i)
-{
-    if (i == -1) return "unknown";
-    if (i == 0) return "sleeping";
-    if (i == 1) return "active";
-
-    return "internal error";
-}
-
-char *myctime(time_t time)
-{
-    char *ts = ctime(&time);
-    ts[strlen(ts) - 1] = 0;
-
-    return ts;
-}
-
-void measure(int fd)
-{
-    time_t start_time;
-    int last_state;
-    time_t last_time;
-    int curr_state;
-    time_t curr_time = 0;
-    time_t time_diff;
-    time_t active_time = 0;
-    time_t sleep_time = 0;
-    time_t unknown_time = 0;
-    time_t total_time = 0;
-    int changes = 0;
-    float tmp;
-
-    printf("Starting measurements\n");
-
-    last_state = check_powermode(fd);
-    start_time = last_time = time(0);
-    printf("  System is in state %s\n\n", state_name(last_state));
-
-    while(!endit) {
-	sleep(1);
-	curr_state = check_powermode(fd);
-
-	if (curr_state != last_state || endit) {
-	    changes++;
-	    curr_time = time(0);
-	    time_diff = curr_time - last_time;
-
-	    if (last_state == 1) active_time += time_diff;
-	    else if (last_state == 0) sleep_time += time_diff;
-	    else unknown_time += time_diff;
-
-	    last_state = curr_state;
-	    last_time = curr_time;
-
-	    printf("%s: State-change to %s\n", myctime(curr_time),
-		   state_name(curr_state));
-	}
-    }
-    changes--; /* Compensate for SIGINT */
-
-    total_time = time(0) - start_time;
-    printf("\nTotal running time:  %lus\n", curr_time - start_time);
-    printf(" State changed %d times\n", changes);
-
-    tmp = (float)sleep_time / (float)total_time * 100;
-    printf(" Time in sleep state:   %lus (%.2f%%)\n", sleep_time, tmp);
-    tmp = (float)active_time / (float)total_time * 100;
-    printf(" Time in active state:  %lus (%.2f%%)\n", active_time, tmp);
-    tmp = (float)unknown_time / (float)total_time * 100;
-    printf(" Time in unknown state: %lus (%.2f%%)\n", unknown_time, tmp);
-}
-
-void ender(int s)
-{
-    endit = 1;
-}
-
-void usage()
-{
-    puts("usage: dslm [-w <time>] <disk>");
-    exit(0);
-}
-
-int main(int argc, char **argv)
-{
-    int fd;
-    char *disk = 0;
-    int settle_time = 60;
-
-    /* Parse the simple command-line */
-    if (argc == 2)
-	disk = argv[1];
-    else if (argc == 4) {
-	settle_time = atoi(argv[2]);
-	disk = argv[3];
-    } else
-	usage();
-
-    if (!(fd = open(disk, O_RDONLY|O_NONBLOCK))) {
-	printf("Can't open %s, because: %s\n", disk, strerror(errno));
-	exit(-1);
-    }
-
-    if (settle_time) {
-	printf("Waiting %d seconds for the system to settle down to "
-	       "'normal'\n", settle_time);
-	sleep(settle_time);
-    } else
-	puts("Not waiting for system to settle down");
-
-    signal(SIGINT, ender);
-
-    measure(fd);
-
-    close(fd);
-
-    return 0;
-}
----------------------------dslm.c END-------------------------------------------
+spends spun up/down.  See Documentation/laptops/dslm.c
diff --git a/Documentation/networking/skfp.txt b/Documentation/networking/skfp.txt
index abfddf8..203ec66 100644
--- a/Documentation/networking/skfp.txt
+++ b/Documentation/networking/skfp.txt
@@ -68,7 +68,7 @@
 =======================
 
 From v2.01 on, the driver is integrated in the linux kernel sources.
-Therefor, the installation is the same as for any other adapter
+Therefore, the installation is the same as for any other adapter
 supported by the kernel.
 Refer to the manual of your distribution about the installation
 of network adapters.
diff --git a/Documentation/networking/timestamping/timestamping.c b/Documentation/networking/timestamping/timestamping.c
index a7936fe..bab619a 100644
--- a/Documentation/networking/timestamping/timestamping.c
+++ b/Documentation/networking/timestamping/timestamping.c
@@ -370,7 +370,7 @@
 	}
 
 	sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP);
-	if (socket < 0)
+	if (sock < 0)
 		bail("socket");
 
 	memset(&device, 0, sizeof(device));
diff --git a/Documentation/pnp.txt b/Documentation/pnp.txt
index a327db6..763e465 100644
--- a/Documentation/pnp.txt
+++ b/Documentation/pnp.txt
@@ -57,7 +57,7 @@
 # cat resources
 DISABLED
 
-- Notice the string "DISABLED".  THis means the device is not active.
+- Notice the string "DISABLED".  This means the device is not active.
 
 3.) check the device's possible configurations (optional)
 # cat options
@@ -139,7 +139,7 @@
 
 Requirements for a Linux PnP protocol:
 1.) the protocol must use EISA IDs
-2.) the protocol must inform the PnP Layer of a devices current configuration
+2.) the protocol must inform the PnP Layer of a device's current configuration
 - the ability to set resources is optional but preferred.
 
 The following are PnP protocol related functions:
@@ -158,7 +158,7 @@
 - automatically will free mem used by the device and related structures
 
 pnp_add_id
-- adds a EISA ID to the list of supported IDs for the specified device
+- adds an EISA ID to the list of supported IDs for the specified device
 
 For more information consult the source of a protocol such as
 /drivers/pnp/pnpbios/core.c.
@@ -167,7 +167,7 @@
 
 Linux Plug and Play Drivers
 ---------------------------
-	This section contains information for linux PnP driver developers.
+	This section contains information for Linux PnP driver developers.
 
 The New Way
 ...........
@@ -235,11 +235,10 @@
 The Old Way
 ...........
 
-a series of compatibility functions have been created to make it easy to convert 
-
+A series of compatibility functions have been created to make it easy to convert
 ISAPNP drivers.  They should serve as a temporary solution only.
 
-they are as follows:
+They are as follows:
 
 struct pnp_card *pnp_find_card(unsigned short vendor,
 				 unsigned short device,
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index ab00eed..55b859b 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -256,7 +256,7 @@
       to suspend the device again in future
 
   int pm_runtime_resume(struct device *dev);
-    - execute the subsystem-leve resume callback for the device; returns 0 on
+    - execute the subsystem-level resume callback for the device; returns 0 on
       success, 1 if the device's run-time PM status was already 'active' or
       error code on failure, where -EAGAIN means it may be safe to attempt to
       resume the device again in future, but 'power.runtime_error' should be
diff --git a/Documentation/s390/kvm.txt b/Documentation/s390/kvm.txt
index 6f5ceb0..85f3280 100644
--- a/Documentation/s390/kvm.txt
+++ b/Documentation/s390/kvm.txt
@@ -102,7 +102,7 @@
 see also:	include/linux/kvm.h
 This ioctl stores the state of the cpu at the guest real address given as
 argument, unless one of the following values defined in include/linux/kvm.h
-is given as arguement:
+is given as argument:
 KVM_S390_STORE_STATUS_NOADDR - the CPU stores its status to the save area in
 absolute lowcore as defined by the principles of operation
 KVM_S390_STORE_STATUS_PREFIXED - the CPU stores its status to the save area in
diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index ff19a52..2ffc114 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -989,8 +989,8 @@
 	* Remove redundant port_cmp != 2 check in if
 	  (!port_cmp) { .... if (port_cmp != 2).... }
 	* Clock changes: removed struct clk_data and timerList.
-	* Clock changes: seperate nodev_tmo and els_retry_delay into 2
-	  seperate timers and convert to 1 argument changed
+	* Clock changes: separate nodev_tmo and els_retry_delay into 2
+	  separate timers and convert to 1 argument changed
 	  LPFC_NODE_FARP_PEND_t to struct lpfc_node_farp_pend convert
 	  ipfarp_tmo to 1 argument convert target struct tmofunc and
 	  rtplunfunc to 1 argument * cr_count, cr_delay and
@@ -1514,7 +1514,7 @@
 	* Remove unused elxclock declaration in elx_sli.h.
 	* Since everywhere IOCB_ENTRY is used, the return value is cast,
 	  move the cast into the macro.
-	* Split ioctls out into seperate files
+	* Split ioctls out into separate files
 
 Changes from 20040326 to 20040402
 
@@ -1534,7 +1534,7 @@
 	* Unused variable cleanup
 	* Use Linux list macros for DMABUF_t
 	* Break up ioctls into 3 sections, dfc, util, hbaapi
-	  rearranged code so this could be easily seperated into a
+	  rearranged code so this could be easily separated into a
 	  differnet module later All 3 are currently turned on by
 	  defines in lpfc_ioctl.c LPFC_DFC_IOCTL, LPFC_UTIL_IOCTL,
 	  LPFC_HBAAPI_IOCTL
@@ -1551,7 +1551,7 @@
 	  started by lpfc_online().  lpfc_offline() only stopped
 	  els_timeout routine.  It now stops all timeout routines
 	  associated with that hba.
-	* Replace seperate next and prev pointers in struct
+	* Replace separate next and prev pointers in struct
 	  lpfc_bindlist with list_head type.  In elxHBA_t, replace
 	  fc_nlpbind_start and _end with fc_nlpbind_list and use
 	  list_head macros to access it.
diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt
index 5e5349a..7c90050 100644
--- a/Documentation/serial/tty.txt
+++ b/Documentation/serial/tty.txt
@@ -105,6 +105,10 @@
 			is permitted to call the driver write method from
 			this function. In such a situation defer it.
 
+dcd_change()	-	Report to the tty line the current DCD pin status
+			changes and the relative timestamp. The timestamp
+			can be NULL.
+
 
 Driver Access
 
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 33df82e..bfcbbf8 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1812,7 +1812,7 @@
   Module snd-ua101
   ----------------
 
-    Module for the Edirol UA-101 audio/MIDI interface.
+    Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces.
 
     This module supports multiple devices, autoprobe and hotplugging.
 
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index fc5790d..6c7d18c 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -573,11 +573,14 @@
 may be not fatal yet.
 
 If this is set to 2, the kernel panics compulsorily even on the
-above-mentioned.
+above-mentioned. Even oom happens under memory cgroup, the whole
+system panics.
 
 The default value is 0.
 1 and 2 are for failover of clustering. Please select either
 according to your policy of failover.
+panic_on_oom=2+kdump gives you very strong tool to investigate
+why oom happens. You can get snapshot.
 
 =============================================================
 
diff --git a/Documentation/timers/00-INDEX b/Documentation/timers/00-INDEX
index 397dc35..a9248da 100644
--- a/Documentation/timers/00-INDEX
+++ b/Documentation/timers/00-INDEX
@@ -4,6 +4,8 @@
 	- High resolution timers and dynamic ticks design notes
 hpet.txt
 	- High Precision Event Timer Driver for Linux
+hpet_example.c
+	- sample hpet timer test program
 hrtimers.txt
 	- subsystem for high-resolution kernel timers
 timer_stats.txt
diff --git a/Documentation/timers/Makefile b/Documentation/timers/Makefile
new file mode 100644
index 0000000..c85625f
--- /dev/null
+++ b/Documentation/timers/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := hpet_example
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt
index 16d25e6..767392f 100644
--- a/Documentation/timers/hpet.txt
+++ b/Documentation/timers/hpet.txt
@@ -26,274 +26,5 @@
 arch/x86/kernel/hpet.c.
 
 The driver provides a userspace API which resembles the API found in the
-RTC driver framework.  An example user space program is provided below.
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <string.h>
-#include <memory.h>
-#include <malloc.h>
-#include <time.h>
-#include <ctype.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <sys/time.h>
-#include <linux/hpet.h>
-
-
-extern void hpet_open_close(int, const char **);
-extern void hpet_info(int, const char **);
-extern void hpet_poll(int, const char **);
-extern void hpet_fasync(int, const char **);
-extern void hpet_read(int, const char **);
-
-#include <sys/poll.h>
-#include <sys/ioctl.h>
-#include <signal.h>
-
-struct hpet_command {
-	char		*command;
-	void		(*func)(int argc, const char ** argv);
-} hpet_command[] = {
-	{
-		"open-close",
-		hpet_open_close
-	},
-	{
-		"info",
-		hpet_info
-	},
-	{
-		"poll",
-		hpet_poll
-	},
-	{
-		"fasync",
-		hpet_fasync
-	},
-};
-
-int
-main(int argc, const char ** argv)
-{
-	int	i;
-
-	argc--;
-	argv++;
-
-	if (!argc) {
-		fprintf(stderr, "-hpet: requires command\n");
-		return -1;
-	}
-
-
-	for (i = 0; i < (sizeof (hpet_command) / sizeof (hpet_command[0])); i++)
-		if (!strcmp(argv[0], hpet_command[i].command)) {
-			argc--;
-			argv++;
-			fprintf(stderr, "-hpet: executing %s\n",
-				hpet_command[i].command);
-			hpet_command[i].func(argc, argv);
-			return 0;
-		}
-
-	fprintf(stderr, "do_hpet: command %s not implemented\n", argv[0]);
-
-	return -1;
-}
-
-void
-hpet_open_close(int argc, const char **argv)
-{
-	int	fd;
-
-	if (argc != 1) {
-		fprintf(stderr, "hpet_open_close: device-name\n");
-		return;
-	}
-
-	fd = open(argv[0], O_RDONLY);
-	if (fd < 0)
-		fprintf(stderr, "hpet_open_close: open failed\n");
-	else
-		close(fd);
-
-	return;
-}
-
-void
-hpet_info(int argc, const char **argv)
-{
-}
-
-void
-hpet_poll(int argc, const char **argv)
-{
-	unsigned long		freq;
-	int			iterations, i, fd;
-	struct pollfd		pfd;
-	struct hpet_info	info;
-	struct timeval		stv, etv;
-	struct timezone		tz;
-	long			usec;
-
-	if (argc != 3) {
-		fprintf(stderr, "hpet_poll: device-name freq iterations\n");
-		return;
-	}
-
-	freq = atoi(argv[1]);
-	iterations = atoi(argv[2]);
-
-	fd = open(argv[0], O_RDONLY);
-
-	if (fd < 0) {
-		fprintf(stderr, "hpet_poll: open of %s failed\n", argv[0]);
-		return;
-	}
-
-	if (ioctl(fd, HPET_IRQFREQ, freq) < 0) {
-		fprintf(stderr, "hpet_poll: HPET_IRQFREQ failed\n");
-		goto out;
-	}
-
-	if (ioctl(fd, HPET_INFO, &info) < 0) {
-		fprintf(stderr, "hpet_poll: failed to get info\n");
-		goto out;
-	}
-
-	fprintf(stderr, "hpet_poll: info.hi_flags 0x%lx\n", info.hi_flags);
-
-	if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) {
-		fprintf(stderr, "hpet_poll: HPET_EPI failed\n");
-		goto out;
-	}
-
-	if (ioctl(fd, HPET_IE_ON, 0) < 0) {
-		fprintf(stderr, "hpet_poll, HPET_IE_ON failed\n");
-		goto out;
-	}
-
-	pfd.fd = fd;
-	pfd.events = POLLIN;
-
-	for (i = 0; i < iterations; i++) {
-		pfd.revents = 0;
-		gettimeofday(&stv, &tz);
-		if (poll(&pfd, 1, -1) < 0)
-			fprintf(stderr, "hpet_poll: poll failed\n");
-		else {
-			long 	data;
-
-			gettimeofday(&etv, &tz);
-			usec = stv.tv_sec * 1000000 + stv.tv_usec;
-			usec = (etv.tv_sec * 1000000 + etv.tv_usec) - usec;
-
-			fprintf(stderr,
-				"hpet_poll: expired time = 0x%lx\n", usec);
-
-			fprintf(stderr, "hpet_poll: revents = 0x%x\n",
-				pfd.revents);
-
-			if (read(fd, &data, sizeof(data)) != sizeof(data)) {
-				fprintf(stderr, "hpet_poll: read failed\n");
-			}
-			else
-				fprintf(stderr, "hpet_poll: data 0x%lx\n",
-					data);
-		}
-	}
-
-out:
-	close(fd);
-	return;
-}
-
-static int hpet_sigio_count;
-
-static void
-hpet_sigio(int val)
-{
-	fprintf(stderr, "hpet_sigio: called\n");
-	hpet_sigio_count++;
-}
-
-void
-hpet_fasync(int argc, const char **argv)
-{
-	unsigned long		freq;
-	int			iterations, i, fd, value;
-	sig_t			oldsig;
-	struct hpet_info	info;
-
-	hpet_sigio_count = 0;
-	fd = -1;
-
-	if ((oldsig = signal(SIGIO, hpet_sigio)) == SIG_ERR) {
-		fprintf(stderr, "hpet_fasync: failed to set signal handler\n");
-		return;
-	}
-
-	if (argc != 3) {
-		fprintf(stderr, "hpet_fasync: device-name freq iterations\n");
-		goto out;
-	}
-
-	fd = open(argv[0], O_RDONLY);
-
-	if (fd < 0) {
-		fprintf(stderr, "hpet_fasync: failed to open %s\n", argv[0]);
-		return;
-	}
-
-
-	if ((fcntl(fd, F_SETOWN, getpid()) == 1) ||
-		((value = fcntl(fd, F_GETFL)) == 1) ||
-		(fcntl(fd, F_SETFL, value | O_ASYNC) == 1)) {
-		fprintf(stderr, "hpet_fasync: fcntl failed\n");
-		goto out;
-	}
-
-	freq = atoi(argv[1]);
-	iterations = atoi(argv[2]);
-
-	if (ioctl(fd, HPET_IRQFREQ, freq) < 0) {
-		fprintf(stderr, "hpet_fasync: HPET_IRQFREQ failed\n");
-		goto out;
-	}
-
-	if (ioctl(fd, HPET_INFO, &info) < 0) {
-		fprintf(stderr, "hpet_fasync: failed to get info\n");
-		goto out;
-	}
-
-	fprintf(stderr, "hpet_fasync: info.hi_flags 0x%lx\n", info.hi_flags);
-
-	if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) {
-		fprintf(stderr, "hpet_fasync: HPET_EPI failed\n");
-		goto out;
-	}
-
-	if (ioctl(fd, HPET_IE_ON, 0) < 0) {
-		fprintf(stderr, "hpet_fasync, HPET_IE_ON failed\n");
-		goto out;
-	}
-
-	for (i = 0; i < iterations; i++) {
-		(void) pause();
-		fprintf(stderr, "hpet_fasync: count = %d\n", hpet_sigio_count);
-	}
-
-out:
-	signal(SIGIO, oldsig);
-
-	if (fd >= 0)
-		close(fd);
-
-	return;
-}
+RTC driver framework.  An example user space program is provided in
+file:Documentation/timers/hpet_example.c
diff --git a/Documentation/timers/hpet_example.c b/Documentation/timers/hpet_example.c
new file mode 100644
index 0000000..f9ce2d9
--- /dev/null
+++ b/Documentation/timers/hpet_example.c
@@ -0,0 +1,269 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <memory.h>
+#include <malloc.h>
+#include <time.h>
+#include <ctype.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <sys/time.h>
+#include <linux/hpet.h>
+
+
+extern void hpet_open_close(int, const char **);
+extern void hpet_info(int, const char **);
+extern void hpet_poll(int, const char **);
+extern void hpet_fasync(int, const char **);
+extern void hpet_read(int, const char **);
+
+#include <sys/poll.h>
+#include <sys/ioctl.h>
+#include <signal.h>
+
+struct hpet_command {
+	char		*command;
+	void		(*func)(int argc, const char ** argv);
+} hpet_command[] = {
+	{
+		"open-close",
+		hpet_open_close
+	},
+	{
+		"info",
+		hpet_info
+	},
+	{
+		"poll",
+		hpet_poll
+	},
+	{
+		"fasync",
+		hpet_fasync
+	},
+};
+
+int
+main(int argc, const char ** argv)
+{
+	int	i;
+
+	argc--;
+	argv++;
+
+	if (!argc) {
+		fprintf(stderr, "-hpet: requires command\n");
+		return -1;
+	}
+
+
+	for (i = 0; i < (sizeof (hpet_command) / sizeof (hpet_command[0])); i++)
+		if (!strcmp(argv[0], hpet_command[i].command)) {
+			argc--;
+			argv++;
+			fprintf(stderr, "-hpet: executing %s\n",
+				hpet_command[i].command);
+			hpet_command[i].func(argc, argv);
+			return 0;
+		}
+
+	fprintf(stderr, "do_hpet: command %s not implemented\n", argv[0]);
+
+	return -1;
+}
+
+void
+hpet_open_close(int argc, const char **argv)
+{
+	int	fd;
+
+	if (argc != 1) {
+		fprintf(stderr, "hpet_open_close: device-name\n");
+		return;
+	}
+
+	fd = open(argv[0], O_RDONLY);
+	if (fd < 0)
+		fprintf(stderr, "hpet_open_close: open failed\n");
+	else
+		close(fd);
+
+	return;
+}
+
+void
+hpet_info(int argc, const char **argv)
+{
+}
+
+void
+hpet_poll(int argc, const char **argv)
+{
+	unsigned long		freq;
+	int			iterations, i, fd;
+	struct pollfd		pfd;
+	struct hpet_info	info;
+	struct timeval		stv, etv;
+	struct timezone		tz;
+	long			usec;
+
+	if (argc != 3) {
+		fprintf(stderr, "hpet_poll: device-name freq iterations\n");
+		return;
+	}
+
+	freq = atoi(argv[1]);
+	iterations = atoi(argv[2]);
+
+	fd = open(argv[0], O_RDONLY);
+
+	if (fd < 0) {
+		fprintf(stderr, "hpet_poll: open of %s failed\n", argv[0]);
+		return;
+	}
+
+	if (ioctl(fd, HPET_IRQFREQ, freq) < 0) {
+		fprintf(stderr, "hpet_poll: HPET_IRQFREQ failed\n");
+		goto out;
+	}
+
+	if (ioctl(fd, HPET_INFO, &info) < 0) {
+		fprintf(stderr, "hpet_poll: failed to get info\n");
+		goto out;
+	}
+
+	fprintf(stderr, "hpet_poll: info.hi_flags 0x%lx\n", info.hi_flags);
+
+	if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) {
+		fprintf(stderr, "hpet_poll: HPET_EPI failed\n");
+		goto out;
+	}
+
+	if (ioctl(fd, HPET_IE_ON, 0) < 0) {
+		fprintf(stderr, "hpet_poll, HPET_IE_ON failed\n");
+		goto out;
+	}
+
+	pfd.fd = fd;
+	pfd.events = POLLIN;
+
+	for (i = 0; i < iterations; i++) {
+		pfd.revents = 0;
+		gettimeofday(&stv, &tz);
+		if (poll(&pfd, 1, -1) < 0)
+			fprintf(stderr, "hpet_poll: poll failed\n");
+		else {
+			long 	data;
+
+			gettimeofday(&etv, &tz);
+			usec = stv.tv_sec * 1000000 + stv.tv_usec;
+			usec = (etv.tv_sec * 1000000 + etv.tv_usec) - usec;
+
+			fprintf(stderr,
+				"hpet_poll: expired time = 0x%lx\n", usec);
+
+			fprintf(stderr, "hpet_poll: revents = 0x%x\n",
+				pfd.revents);
+
+			if (read(fd, &data, sizeof(data)) != sizeof(data)) {
+				fprintf(stderr, "hpet_poll: read failed\n");
+			}
+			else
+				fprintf(stderr, "hpet_poll: data 0x%lx\n",
+					data);
+		}
+	}
+
+out:
+	close(fd);
+	return;
+}
+
+static int hpet_sigio_count;
+
+static void
+hpet_sigio(int val)
+{
+	fprintf(stderr, "hpet_sigio: called\n");
+	hpet_sigio_count++;
+}
+
+void
+hpet_fasync(int argc, const char **argv)
+{
+	unsigned long		freq;
+	int			iterations, i, fd, value;
+	sig_t			oldsig;
+	struct hpet_info	info;
+
+	hpet_sigio_count = 0;
+	fd = -1;
+
+	if ((oldsig = signal(SIGIO, hpet_sigio)) == SIG_ERR) {
+		fprintf(stderr, "hpet_fasync: failed to set signal handler\n");
+		return;
+	}
+
+	if (argc != 3) {
+		fprintf(stderr, "hpet_fasync: device-name freq iterations\n");
+		goto out;
+	}
+
+	fd = open(argv[0], O_RDONLY);
+
+	if (fd < 0) {
+		fprintf(stderr, "hpet_fasync: failed to open %s\n", argv[0]);
+		return;
+	}
+
+
+	if ((fcntl(fd, F_SETOWN, getpid()) == 1) ||
+		((value = fcntl(fd, F_GETFL)) == 1) ||
+		(fcntl(fd, F_SETFL, value | O_ASYNC) == 1)) {
+		fprintf(stderr, "hpet_fasync: fcntl failed\n");
+		goto out;
+	}
+
+	freq = atoi(argv[1]);
+	iterations = atoi(argv[2]);
+
+	if (ioctl(fd, HPET_IRQFREQ, freq) < 0) {
+		fprintf(stderr, "hpet_fasync: HPET_IRQFREQ failed\n");
+		goto out;
+	}
+
+	if (ioctl(fd, HPET_INFO, &info) < 0) {
+		fprintf(stderr, "hpet_fasync: failed to get info\n");
+		goto out;
+	}
+
+	fprintf(stderr, "hpet_fasync: info.hi_flags 0x%lx\n", info.hi_flags);
+
+	if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) {
+		fprintf(stderr, "hpet_fasync: HPET_EPI failed\n");
+		goto out;
+	}
+
+	if (ioctl(fd, HPET_IE_ON, 0) < 0) {
+		fprintf(stderr, "hpet_fasync, HPET_IE_ON failed\n");
+		goto out;
+	}
+
+	for (i = 0; i < iterations; i++) {
+		(void) pause();
+		fprintf(stderr, "hpet_fasync: count = %d\n", hpet_sigio_count);
+	}
+
+out:
+	signal(SIGIO, oldsig);
+
+	if (fd >= 0)
+		close(fd);
+
+	return;
+}
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index bab3040..03485bf 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -1588,7 +1588,7 @@
 
 When tracing is enabled, kstop_machine is called to prevent
 races with the CPUS executing code being modified (which can
-cause the CPU to do undesireable things), and the nops are
+cause the CPU to do undesirable things), and the nops are
 patched back to calls. But this time, they do not call mcount
 (which is just a function stub). They now call into the ftrace
 infrastructure.
diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX
index e57d6a9..dca82d7 100644
--- a/Documentation/vm/00-INDEX
+++ b/Documentation/vm/00-INDEX
@@ -4,23 +4,35 @@
 	- An explanation from Linus about tsk->active_mm vs tsk->mm.
 balance
 	- various information on memory balancing.
+hugepage-mmap.c
+	- Example app using huge page memory with the mmap system call.
+hugepage-shm.c
+	- Example app using huge page memory with Sys V shared memory system calls.
 hugetlbpage.txt
 	- a brief summary of hugetlbpage support in the Linux kernel.
+hwpoison.txt
+	- explains what hwpoison is
 ksm.txt
 	- how to use the Kernel Samepage Merging feature.
 locking
 	- info on how locking and synchronization is done in the Linux vm code.
+map_hugetlb.c
+	- an example program that uses the MAP_HUGETLB mmap flag.
 numa
 	- information about NUMA specific code in the Linux vm.
 numa_memory_policy.txt
 	- documentation of concepts and APIs of the 2.6 memory policy support.
 overcommit-accounting
 	- description of the Linux kernels overcommit handling modes.
+page-types.c
+	- Tool for querying page flags
 page_migration
 	- description of page migration in NUMA systems.
+pagemap.txt
+	- pagemap, from the userspace perspective
 slabinfo.c
 	- source code for a tool to get reports about slabs.
 slub.txt
 	- a short users guide for SLUB.
-map_hugetlb.c
-	- an example program that uses the MAP_HUGETLB mmap flag.
+unevictable-lru.txt
+	- Unevictable LRU infrastructure
diff --git a/Documentation/vm/Makefile b/Documentation/vm/Makefile
index 5bd269b..9dcff32 100644
--- a/Documentation/vm/Makefile
+++ b/Documentation/vm/Makefile
@@ -2,7 +2,7 @@
 obj- := dummy.o
 
 # List of programs to build
-hostprogs-y := slabinfo page-types
+hostprogs-y := slabinfo page-types hugepage-mmap hugepage-shm map_hugetlb
 
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
diff --git a/Documentation/vm/hugepage-mmap.c b/Documentation/vm/hugepage-mmap.c
new file mode 100644
index 0000000..db0dd9a
--- /dev/null
+++ b/Documentation/vm/hugepage-mmap.c
@@ -0,0 +1,91 @@
+/*
+ * hugepage-mmap:
+ *
+ * Example of using huge page memory in a user application using the mmap
+ * system call.  Before running this application, make sure that the
+ * administrator has mounted the hugetlbfs filesystem (on some directory
+ * like /mnt) using the command mount -t hugetlbfs nodev /mnt. In this
+ * example, the app is requesting memory of size 256MB that is backed by
+ * huge pages.
+ *
+ * For the ia64 architecture, the Linux kernel reserves Region number 4 for
+ * huge pages.  That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required.  If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/mman.h>
+#include <fcntl.h>
+
+#define FILE_NAME "/mnt/hugepagefile"
+#define LENGTH (256UL*1024*1024)
+#define PROTECTION (PROT_READ | PROT_WRITE)
+
+/* Only ia64 requires this */
+#ifdef __ia64__
+#define ADDR (void *)(0x8000000000000000UL)
+#define FLAGS (MAP_SHARED | MAP_FIXED)
+#else
+#define ADDR (void *)(0x0UL)
+#define FLAGS (MAP_SHARED)
+#endif
+
+static void check_bytes(char *addr)
+{
+	printf("First hex is %x\n", *((unsigned int *)addr));
+}
+
+static void write_bytes(char *addr)
+{
+	unsigned long i;
+
+	for (i = 0; i < LENGTH; i++)
+		*(addr + i) = (char)i;
+}
+
+static void read_bytes(char *addr)
+{
+	unsigned long i;
+
+	check_bytes(addr);
+	for (i = 0; i < LENGTH; i++)
+		if (*(addr + i) != (char)i) {
+			printf("Mismatch at %lu\n", i);
+			break;
+		}
+}
+
+int main(void)
+{
+	void *addr;
+	int fd;
+
+	fd = open(FILE_NAME, O_CREAT | O_RDWR, 0755);
+	if (fd < 0) {
+		perror("Open failed");
+		exit(1);
+	}
+
+	addr = mmap(ADDR, LENGTH, PROTECTION, FLAGS, fd, 0);
+	if (addr == MAP_FAILED) {
+		perror("mmap");
+		unlink(FILE_NAME);
+		exit(1);
+	}
+
+	printf("Returned address is %p\n", addr);
+	check_bytes(addr);
+	write_bytes(addr);
+	read_bytes(addr);
+
+	munmap(addr, LENGTH);
+	close(fd);
+	unlink(FILE_NAME);
+
+	return 0;
+}
diff --git a/Documentation/vm/hugepage-shm.c b/Documentation/vm/hugepage-shm.c
new file mode 100644
index 0000000..07956d8
--- /dev/null
+++ b/Documentation/vm/hugepage-shm.c
@@ -0,0 +1,98 @@
+/*
+ * hugepage-shm:
+ *
+ * Example of using huge page memory in a user application using Sys V shared
+ * memory system calls.  In this example the app is requesting 256MB of
+ * memory that is backed by huge pages.  The application uses the flag
+ * SHM_HUGETLB in the shmget system call to inform the kernel that it is
+ * requesting huge pages.
+ *
+ * For the ia64 architecture, the Linux kernel reserves Region number 4 for
+ * huge pages.  That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required.  If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
+ *
+ * Note: The default shared memory limit is quite low on many kernels,
+ * you may need to increase it via:
+ *
+ * echo 268435456 > /proc/sys/kernel/shmmax
+ *
+ * This will increase the maximum size per shared memory segment to 256MB.
+ * The other limit that you will hit eventually is shmall which is the
+ * total amount of shared memory in pages. To set it to 16GB on a system
+ * with a 4kB pagesize do:
+ *
+ * echo 4194304 > /proc/sys/kernel/shmall
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/ipc.h>
+#include <sys/shm.h>
+#include <sys/mman.h>
+
+#ifndef SHM_HUGETLB
+#define SHM_HUGETLB 04000
+#endif
+
+#define LENGTH (256UL*1024*1024)
+
+#define dprintf(x)  printf(x)
+
+/* Only ia64 requires this */
+#ifdef __ia64__
+#define ADDR (void *)(0x8000000000000000UL)
+#define SHMAT_FLAGS (SHM_RND)
+#else
+#define ADDR (void *)(0x0UL)
+#define SHMAT_FLAGS (0)
+#endif
+
+int main(void)
+{
+	int shmid;
+	unsigned long i;
+	char *shmaddr;
+
+	if ((shmid = shmget(2, LENGTH,
+			    SHM_HUGETLB | IPC_CREAT | SHM_R | SHM_W)) < 0) {
+		perror("shmget");
+		exit(1);
+	}
+	printf("shmid: 0x%x\n", shmid);
+
+	shmaddr = shmat(shmid, ADDR, SHMAT_FLAGS);
+	if (shmaddr == (char *)-1) {
+		perror("Shared memory attach failure");
+		shmctl(shmid, IPC_RMID, NULL);
+		exit(2);
+	}
+	printf("shmaddr: %p\n", shmaddr);
+
+	dprintf("Starting the writes:\n");
+	for (i = 0; i < LENGTH; i++) {
+		shmaddr[i] = (char)(i);
+		if (!(i % (1024 * 1024)))
+			dprintf(".");
+	}
+	dprintf("\n");
+
+	dprintf("Starting the Check...");
+	for (i = 0; i < LENGTH; i++)
+		if (shmaddr[i] != (char)i)
+			printf("\nIndex %lu mismatched\n", i);
+	dprintf("Done.\n");
+
+	if (shmdt((const void *)shmaddr) != 0) {
+		perror("Detach failure");
+		shmctl(shmid, IPC_RMID, NULL);
+		exit(3);
+	}
+
+	shmctl(shmid, IPC_RMID, NULL);
+
+	return 0;
+}
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index bc31636..457634c 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -299,176 +299,11 @@
 *******************************************************************
 
 /*
- * Example of using huge page memory in a user application using Sys V shared
- * memory system calls.  In this example the app is requesting 256MB of
- * memory that is backed by huge pages.  The application uses the flag
- * SHM_HUGETLB in the shmget system call to inform the kernel that it is
- * requesting huge pages.
- *
- * For the ia64 architecture, the Linux kernel reserves Region number 4 for
- * huge pages.  That means that if one requires a fixed address, a huge page
- * aligned address starting with 0x800000... will be required.  If a fixed
- * address is not required, the kernel will select an address in the proper
- * range.
- * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
- *
- * Note: The default shared memory limit is quite low on many kernels,
- * you may need to increase it via:
- *
- * echo 268435456 > /proc/sys/kernel/shmmax
- *
- * This will increase the maximum size per shared memory segment to 256MB.
- * The other limit that you will hit eventually is shmall which is the
- * total amount of shared memory in pages. To set it to 16GB on a system
- * with a 4kB pagesize do:
- *
- * echo 4194304 > /proc/sys/kernel/shmall
+ * hugepage-shm:  see Documentation/vm/hugepage-shm.c
  */
-#include <stdlib.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <sys/mman.h>
-
-#ifndef SHM_HUGETLB
-#define SHM_HUGETLB 04000
-#endif
-
-#define LENGTH (256UL*1024*1024)
-
-#define dprintf(x)  printf(x)
-
-#define ADDR (void *)(0x0UL)	/* let kernel choose address */
-#define SHMAT_FLAGS (0)
-
-int main(void)
-{
-	int shmid;
-	unsigned long i;
-	char *shmaddr;
-
-	if ((shmid = shmget(2, LENGTH,
-			    SHM_HUGETLB | IPC_CREAT | SHM_R | SHM_W)) < 0) {
-		perror("shmget");
-		exit(1);
-	}
-	printf("shmid: 0x%x\n", shmid);
-
-	shmaddr = shmat(shmid, ADDR, SHMAT_FLAGS);
-	if (shmaddr == (char *)-1) {
-		perror("Shared memory attach failure");
-		shmctl(shmid, IPC_RMID, NULL);
-		exit(2);
-	}
-	printf("shmaddr: %p\n", shmaddr);
-
-	dprintf("Starting the writes:\n");
-	for (i = 0; i < LENGTH; i++) {
-		shmaddr[i] = (char)(i);
-		if (!(i % (1024 * 1024)))
-			dprintf(".");
-	}
-	dprintf("\n");
-
-	dprintf("Starting the Check...");
-	for (i = 0; i < LENGTH; i++)
-		if (shmaddr[i] != (char)i)
-			printf("\nIndex %lu mismatched\n", i);
-	dprintf("Done.\n");
-
-	if (shmdt((const void *)shmaddr) != 0) {
-		perror("Detach failure");
-		shmctl(shmid, IPC_RMID, NULL);
-		exit(3);
-	}
-
-	shmctl(shmid, IPC_RMID, NULL);
-
-	return 0;
-}
 
 *******************************************************************
 
 /*
- * Example of using huge page memory in a user application using the mmap
- * system call.  Before running this application, make sure that the
- * administrator has mounted the hugetlbfs filesystem (on some directory
- * like /mnt) using the command mount -t hugetlbfs nodev /mnt. In this
- * example, the app is requesting memory of size 256MB that is backed by
- * huge pages.
- *
- * For the ia64 architecture, the Linux kernel reserves Region number 4 for
- * huge pages.  That means that if one requires a fixed address, a huge page
- * aligned address starting with 0x800000... will be required.  If a fixed
- * address is not required, the kernel will select an address in the proper
- * range.
- * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
+ * hugepage-mmap:  see Documentation/vm/hugepage-mmap.c
  */
-#include <stdlib.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <sys/mman.h>
-#include <fcntl.h>
-
-#define FILE_NAME "/mnt/hugepagefile"
-#define LENGTH (256UL*1024*1024)
-#define PROTECTION (PROT_READ | PROT_WRITE)
-
-#define ADDR (void *)(0x0UL)	/* let kernel choose address */
-#define FLAGS (MAP_SHARED)
-
-void check_bytes(char *addr)
-{
-	printf("First hex is %x\n", *((unsigned int *)addr));
-}
-
-void write_bytes(char *addr)
-{
-	unsigned long i;
-
-	for (i = 0; i < LENGTH; i++)
-		*(addr + i) = (char)i;
-}
-
-void read_bytes(char *addr)
-{
-	unsigned long i;
-
-	check_bytes(addr);
-	for (i = 0; i < LENGTH; i++)
-		if (*(addr + i) != (char)i) {
-			printf("Mismatch at %lu\n", i);
-			break;
-		}
-}
-
-int main(void)
-{
-	void *addr;
-	int fd;
-
-	fd = open(FILE_NAME, O_CREAT | O_RDWR, 0755);
-	if (fd < 0) {
-		perror("Open failed");
-		exit(1);
-	}
-
-	addr = mmap(ADDR, LENGTH, PROTECTION, FLAGS, fd, 0);
-	if (addr == MAP_FAILED) {
-		perror("mmap");
-		unlink(FILE_NAME);
-		exit(1);
-	}
-
-	printf("Returned address is %p\n", addr);
-	check_bytes(addr);
-	write_bytes(addr);
-	read_bytes(addr);
-
-	munmap(addr, LENGTH);
-	close(fd);
-	unlink(FILE_NAME);
-
-	return 0;
-}
diff --git a/Documentation/vm/map_hugetlb.c b/Documentation/vm/map_hugetlb.c
index e2bdae3..9969c7d 100644
--- a/Documentation/vm/map_hugetlb.c
+++ b/Documentation/vm/map_hugetlb.c
@@ -31,12 +31,12 @@
 #define FLAGS (MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB)
 #endif
 
-void check_bytes(char *addr)
+static void check_bytes(char *addr)
 {
 	printf("First hex is %x\n", *((unsigned int *)addr));
 }
 
-void write_bytes(char *addr)
+static void write_bytes(char *addr)
 {
 	unsigned long i;
 
@@ -44,7 +44,7 @@
 		*(addr + i) = (char)i;
 }
 
-void read_bytes(char *addr)
+static void read_bytes(char *addr)
 {
 	unsigned long i;
 
diff --git a/Documentation/voyager.txt b/Documentation/voyager.txt
deleted file mode 100644
index 2749af5..0000000
--- a/Documentation/voyager.txt
+++ /dev/null
@@ -1,95 +0,0 @@
-Running Linux on the Voyager Architecture
-=========================================
-
-For full details and current project status, see
-
-http://www.hansenpartnership.com/voyager
-
-The voyager architecture was designed by NCR in the mid 80s to be a
-fully SMP capable RAS computing architecture built around intel's 486
-chip set.  The voyager came in three levels of architectural
-sophistication: 3,4 and 5 --- 1 and 2 never made it out of prototype.
-The linux patches support only the Level 5 voyager architecture (any
-machine class 3435 and above).
-
-The Voyager Architecture
-------------------------
-
-Voyager machines consist of a Baseboard with a 386 diagnostic
-processor, a Power Supply Interface (PSI) a Primary and possibly
-Secondary Microchannel bus and between 2 and 20 voyager slots.  The
-voyager slots can be populated with memory and cpu cards (up to 4GB
-memory and from 1 486 to 32 Pentium Pro processors).  Internally, the
-voyager has a dual arbitrated system bus and a configuration and test
-bus (CAT).  The voyager bus speed is 40MHz.  Therefore (since all
-voyager cards are dual ported for each system bus) the maximum
-transfer rate is 320Mb/s but only if you have your slot configuration
-tuned (only memory cards can communicate with both busses at once, CPU
-cards utilise them one at a time).
-
-Voyager SMP
------------
-
-Since voyager was the first intel based SMP system, it is slightly
-more primitive than the Intel IO-APIC approach to SMP.  Voyager allows
-arbitrary interrupt routing (including processor affinity routing) of
-all 16 PC type interrupts.  However it does this by using a modified
-5259 master/slave chip set instead of an APIC bus.  Additionally,
-voyager supports Cross Processor Interrupts (CPI) equivalent to the
-APIC IPIs.  There are two routed voyager interrupt lines provided to
-each slot.
-
-Processor Cards
----------------
-
-These come in single, dyadic and quad configurations (the quads are
-problematic--see later).  The maximum configuration is 8 quad cards
-for 32 way SMP.
-
-Quad Processors
----------------
-
-Because voyager only supplies two interrupt lines to each Processor
-card, the Quad processors have to be configured (and Bootstrapped) in
-as a pair of Master/Slave processors.
-
-In fact, most Quad cards only accept one VIC interrupt line, so they
-have one interrupt handling processor (called the VIC extended
-processor) and three non-interrupt handling processors.
-
-Current Status
---------------
-
-The System will boot on Mono, Dyad and Quad cards.  There was
-originally a Quad boot problem which has been fixed by proper gdt
-alignment in the initial boot loader.  If you still cannot get your
-voyager system to boot, email me at:
-
-<J.E.J.Bottomley@HansenPartnership.com>
-
-
-The Quad cards now support using the separate Quad CPI vectors instead
-of going through the VIC mailbox system.
-
-The Level 4 architecture (3430 and 3360 Machines) should also work
-fine.
-
-Dump Switch
------------
-
-The voyager dump switch sends out a broadcast NMI which the voyager
-code intercepts and does a task dump.
-
-Power Switch
-------------
-
-The front panel power switch is intercepted by the kernel and should
-cause a system shutdown and power off.
-
-A Note About Mixed CPU Systems
-------------------------------
-
-Linux isn't designed to handle mixed CPU systems very well.  In order
-to get everything going you *must* make sure that your lowest
-capability CPU is used for booting.  Also, mixing CPU classes
-(e.g. 486 and 586) is really not going to work very well at all.
diff --git a/MAINTAINERS b/MAINTAINERS
index c8a8b1f..47cc449 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -666,6 +666,12 @@
 F:	arch/arm/mach-mx*/
 F:	arch/arm/plat-mxc/
 
+ARM/FREESCALE IMX51
+M:	Amit Kucheria <amit.kucheria@canonical.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-mx5/
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -939,6 +945,16 @@
 S:	Maintained
 F:	arch/arm/mach-s3c6410/
 
+ARM/SHMOBILE ARM ARCHITECTURE
+M:	Paul Mundt <lethal@linux-sh.org>
+M:	Magnus Damm <magnus.damm@gmail.com>
+L:	linux-sh@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
+W:	http://oss.renesas.com
+S:	Supported
+F:	arch/arm/mach-shmobile/
+F:	drivers/sh/
+
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1235,6 +1251,13 @@
 S:	Supported
 F:	drivers/rtc/rtc-bfin.c
 
+BLACKFIN SDH DRIVER
+M:	Cliff Cai <cliff.cai@analog.com>
+L:	uclinux-dist-devel@blackfin.uclinux.org
+W:	http://blackfin.uclinux.org
+S:	Supported
+F:	drivers/mmc/host/bfin_sdh.c
+
 BLACKFIN SERIAL DRIVER
 M:	Sonic Zhang <sonic.zhang@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
@@ -1382,20 +1405,30 @@
 F:	arch/x86/include/asm/tce.h
 
 CAN NETWORK LAYER
-M:	Urs Thuermann <urs.thuermann@volkswagen.de>
+M:	Oliver Hartkopp <socketcan@hartkopp.net>
 M:	Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
-L:	socketcan-core@lists.berlios.de (subscribers-only)
+M:	Urs Thuermann <urs.thuermann@volkswagen.de>
+L:	socketcan-core@lists.berlios.de
+L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
-F:	drivers/net/can/
-F:	include/linux/can/
+F:	net/can/
 F:	include/linux/can.h
+F:	include/linux/can/core.h
+F:	include/linux/can/bcm.h
+F:	include/linux/can/raw.h
 
 CAN NETWORK DRIVERS
 M:	Wolfgang Grandegger <wg@grandegger.com>
-L:	socketcan-core@lists.berlios.de (subscribers-only)
+L:	socketcan-core@lists.berlios.de
+L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
+F:	drivers/net/can/
+F:	include/linux/can/dev.h
+F:	include/linux/can/error.h
+F:	include/linux/can/netlink.h
+F:	include/linux/can/platform/
 
 CELL BROADBAND ENGINE ARCHITECTURE
 M:	Arnd Bergmann <arnd@arndb.de>
@@ -2107,6 +2140,7 @@
 ETHERNET BRIDGE
 M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	bridge@lists.linux-foundation.org
+L:	netdev@vger.kernel.org
 W:	http://www.linux-foundation.org/en/Net:Bridge
 S:	Maintained
 F:	include/linux/netfilter_bridge/
@@ -2804,7 +2838,7 @@
 F:	drivers/input/
 
 INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-M:	Sylvain Meyer <sylvain.meyer@worldonline.fr>
+M:	Maik Broemme <mbroemme@plusserver.de>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/fb/intelfb.txt
@@ -3621,7 +3655,7 @@
 
 MEMORY RESOURCE CONTROLLER
 M:	Balbir Singh <balbir@linux.vnet.ibm.com>
-M:	Pavel Emelyanov <xemul@openvz.org>
+M:	Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
 M:	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
 L:	linux-mm@kvack.org
 S:	Maintained
@@ -4293,6 +4327,7 @@
 M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
 M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
+M:	Arnaldo Carvalho de Melo <acme@redhat.com>
 S:	Supported
 F:	kernel/perf_event.c
 F:	include/linux/perf_event.h
@@ -4495,6 +4530,13 @@
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
 S:	Maintained
 
+MMP2 SUPPORT (aka ARMADA610)
+M:	Haojian Zhuang <haojian.zhuang@marvell.com>
+M:	Eric Miao <eric.y.miao@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+S:	Maintained
+
 PXA MMCI DRIVER
 S:	Orphan
 
diff --git a/Makefile b/Makefile
index 1b248952..08ff02d 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
-SUBLEVEL = 33
-EXTRAVERSION =
+SUBLEVEL = 34
+EXTRAVERSION = -rc1
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index bd7261e..75291fd 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -10,6 +10,7 @@
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS
 	select HAVE_PERF_EVENTS
+	select HAVE_DMA_ATTRS
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
@@ -58,6 +59,9 @@
 	bool
 	default y
 
+config NEED_DMA_MAP_STATE
+       def_bool y
+
 config GENERIC_ISA_DMA
 	bool
 	default y
diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
index 04eb568..1bce816 100644
--- a/arch/alpha/include/asm/dma-mapping.h
+++ b/arch/alpha/include/asm/dma-mapping.h
@@ -1,71 +1,49 @@
 #ifndef _ALPHA_DMA_MAPPING_H
 #define _ALPHA_DMA_MAPPING_H
 
+#include <linux/dma-attrs.h>
 
-#ifdef CONFIG_PCI
+extern struct dma_map_ops *dma_ops;
 
-#include <linux/pci.h>
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+	return dma_ops;
+}
 
-#define dma_map_single(dev, va, size, dir)		\
-		pci_map_single(alpha_gendev_to_pci(dev), va, size, dir)
-#define dma_unmap_single(dev, addr, size, dir)		\
-		pci_unmap_single(alpha_gendev_to_pci(dev), addr, size, dir)
-#define dma_alloc_coherent(dev, size, addr, gfp)	\
-	      __pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr, gfp)
-#define dma_free_coherent(dev, size, va, addr)		\
-		pci_free_consistent(alpha_gendev_to_pci(dev), size, va, addr)
-#define dma_map_page(dev, page, off, size, dir)		\
-		pci_map_page(alpha_gendev_to_pci(dev), page, off, size, dir)
-#define dma_unmap_page(dev, addr, size, dir)		\
-		pci_unmap_page(alpha_gendev_to_pci(dev), addr, size, dir)
-#define dma_map_sg(dev, sg, nents, dir)			\
-		pci_map_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
-#define dma_unmap_sg(dev, sg, nents, dir)		\
-		pci_unmap_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
-#define dma_supported(dev, mask)			\
-		pci_dma_supported(alpha_gendev_to_pci(dev), mask)
-#define dma_mapping_error(dev, addr)				\
-		pci_dma_mapping_error(alpha_gendev_to_pci(dev), addr)
+#include <asm-generic/dma-mapping-common.h>
 
-#else	/* no PCI - no IOMMU. */
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t gfp)
+{
+	return get_dma_ops(dev)->alloc_coherent(dev, size, dma_handle, gfp);
+}
 
-#include <asm/io.h>	/* for virt_to_phys() */
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *vaddr, dma_addr_t dma_handle)
+{
+	get_dma_ops(dev)->free_coherent(dev, size, vaddr, dma_handle);
+}
 
-struct scatterlist;
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t gfp);
-int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	       enum dma_data_direction direction);
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return get_dma_ops(dev)->mapping_error(dev, dma_addr);
+}
 
-#define dma_free_coherent(dev, size, va, addr)		\
-		free_pages((unsigned long)va, get_order(size))
-#define dma_supported(dev, mask)		(mask < 0x00ffffffUL ? 0 : 1)
-#define dma_map_single(dev, va, size, dir)	virt_to_phys(va)
-#define dma_map_page(dev, page, off, size, dir)	(page_to_pa(page) + off)
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	return get_dma_ops(dev)->dma_supported(dev, mask);
+}
 
-#define dma_unmap_single(dev, addr, size, dir)	((void)0)
-#define dma_unmap_page(dev, addr, size, dir)	((void)0)
-#define dma_unmap_sg(dev, sg, nents, dir)	((void)0)
-
-#define dma_mapping_error(dev, addr)  (0)
-
-#endif	/* !CONFIG_PCI */
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+	return get_dma_ops(dev)->set_dma_mask(dev, mask);
+}
 
 #define dma_alloc_noncoherent(d, s, h, f)	dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h)	dma_free_coherent(d, s, v, h)
 #define dma_is_consistent(d, h)			(1)
 
-int dma_set_mask(struct device *dev, u64 mask);
-
-#define dma_sync_single_for_cpu(dev, addr, size, dir)	  ((void)0)
-#define dma_sync_single_for_device(dev, addr, size, dir)  ((void)0)
-#define dma_sync_single_range(dev, addr, off, size, dir)  ((void)0)
-#define dma_sync_sg_for_cpu(dev, sg, nents, dir)	  ((void)0)
-#define dma_sync_sg_for_device(dev, sg, nents, dir)	  ((void)0)
 #define dma_cache_sync(dev, va, size, dir)		  ((void)0)
-#define dma_sync_single_range_for_cpu(dev, addr, offset, size, dir)	((void)0)
-#define dma_sync_single_range_for_device(dev, addr, offset, size, dir)	((void)0)
-
 #define dma_get_cache_alignment()			  L1_CACHE_BYTES
 
 #endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h
index dd8dcab..28d0497 100644
--- a/arch/alpha/include/asm/pci.h
+++ b/arch/alpha/include/asm/pci.h
@@ -70,142 +70,11 @@
    decisions.  */
 #define PCI_DMA_BUS_IS_PHYS  0
 
-/* Allocate and map kernel buffer using consistent mode DMA for PCI
-   device.  Returns non-NULL cpu-view pointer to the buffer if
-   successful and sets *DMA_ADDRP to the pci side dma address as well,
-   else DMA_ADDRP is undefined.  */
-
-extern void *__pci_alloc_consistent(struct pci_dev *, size_t,
-				    dma_addr_t *, gfp_t);
-static inline void *
-pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma)
-{
-	return __pci_alloc_consistent(dev, size, dma, GFP_ATOMIC);
-}
-
-/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
-   be values that were returned from pci_alloc_consistent.  SIZE must
-   be the same as what as passed into pci_alloc_consistent.
-   References to the memory and mappings associated with CPU_ADDR or
-   DMA_ADDR past this call are illegal.  */
-
-extern void pci_free_consistent(struct pci_dev *, size_t, void *, dma_addr_t);
-
-/* Map a single buffer of the indicate size for PCI DMA in streaming mode.
-   The 32-bit PCI bus mastering address to use is returned.  Once the device
-   is given the dma address, the device owns this memory until either
-   pci_unmap_single or pci_dma_sync_single_for_cpu is performed.  */
-
-extern dma_addr_t pci_map_single(struct pci_dev *, void *, size_t, int);
-
-/* Likewise, but for a page instead of an address.  */
-extern dma_addr_t pci_map_page(struct pci_dev *, struct page *,
-			       unsigned long, size_t, int);
-
-/* Test for pci_map_single or pci_map_page having generated an error.  */
-
-static inline int
-pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
-{
-	return dma_addr == 0;
-}
-
-/* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
-   SIZE must match what was provided for in a previous pci_map_single
-   call.  All other usages are undefined.  After this call, reads by
-   the cpu to the buffer are guaranteed to see whatever the device
-   wrote there.  */
-
-extern void pci_unmap_single(struct pci_dev *, dma_addr_t, size_t, int);
-extern void pci_unmap_page(struct pci_dev *, dma_addr_t, size_t, int);
-
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
-/* Map a set of buffers described by scatterlist in streaming mode for
-   PCI DMA.  This is the scatter-gather version of the above
-   pci_map_single interface.  Here the scatter gather list elements
-   are each tagged with the appropriate PCI dma address and length.
-   They are obtained via sg_dma_{address,length}(SG).
-
-   NOTE: An implementation may be able to use a smaller number of DMA
-   address/length pairs than there are SG table elements.  (for
-   example via virtual mapping capabilities) The routine returns the
-   number of addr/length pairs actually used, at most nents.
-
-   Device ownership issues as mentioned above for pci_map_single are
-   the same here.  */
-
-extern int pci_map_sg(struct pci_dev *, struct scatterlist *, int, int);
-
-/* Unmap a set of streaming mode DMA translations.  Again, cpu read
-   rules concerning calls here are the same as for pci_unmap_single()
-   above.  */
-
-extern void pci_unmap_sg(struct pci_dev *, struct scatterlist *, int, int);
-
-/* Make physical memory consistent for a single streaming mode DMA
-   translation after a transfer and device currently has ownership
-   of the buffer.
-
-   If you perform a pci_map_single() but wish to interrogate the
-   buffer using the cpu, yet do not wish to teardown the PCI dma
-   mapping, you must call this function before doing so.  At the next
-   point you give the PCI dma address back to the card, you must first
-   perform a pci_dma_sync_for_device, and then the device again owns
-   the buffer.  */
-
-static inline void
-pci_dma_sync_single_for_cpu(struct pci_dev *dev, dma_addr_t dma_addr,
-			    long size, int direction)
-{
-	/* Nothing to do.  */
-}
-
-static inline void
-pci_dma_sync_single_for_device(struct pci_dev *dev, dma_addr_t dma_addr,
-			       size_t size, int direction)
-{
-	/* Nothing to do.  */
-}
-
-/* Make physical memory consistent for a set of streaming mode DMA
-   translations after a transfer.  The same as pci_dma_sync_single_*
-   but for a scatter-gather list, same rules and usage.  */
-
-static inline void
-pci_dma_sync_sg_for_cpu(struct pci_dev *dev, struct scatterlist *sg,
-			int nents, int direction)
-{
-	/* Nothing to do.  */
-}
-
-static inline void
-pci_dma_sync_sg_for_device(struct pci_dev *dev, struct scatterlist *sg,
-			   int nents, int direction)
-{
-	/* Nothing to do.  */
-}
-
-/* Return whether the given PCI device DMA address mask can
-   be supported properly.  For example, if your device can
-   only drive the low 24-bits during PCI bus mastering, then
-   you would pass 0x00ffffff as the mask to this function.  */
-
-extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
-
 #ifdef CONFIG_PCI
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -244,8 +113,6 @@
 	return hose->need_domain_info;
 }
 
-struct pci_dev *alpha_gendev_to_pci(struct device *dev);
-
 #endif /* __KERNEL__ */
 
 /* Values for the `which' argument to sys_pciconfig_iobase.  */
diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h
index 32c7a5c..65cf3e2 100644
--- a/arch/alpha/include/asm/ptrace.h
+++ b/arch/alpha/include/asm/ptrace.h
@@ -68,6 +68,7 @@
 
 #ifdef __KERNEL__
 
+#define arch_has_single_step()		(1)
 #define user_mode(regs) (((regs)->ps & 8) != 0)
 #define instruction_pointer(regs) ((regs)->pc)
 #define profile_pc(regs) instruction_pointer(regs)
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
index c19a376..823a540 100644
--- a/arch/alpha/kernel/pci-noop.c
+++ b/arch/alpha/kernel/pci-noop.c
@@ -106,58 +106,8 @@
 		return -ENODEV;
 }
 
-/* Stubs for the routines in pci_iommu.c: */
-
-void *
-__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
-		       dma_addr_t *dma_addrp, gfp_t gfp)
-{
-	return NULL;
-}
-
-void
-pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu_addr,
-		    dma_addr_t dma_addr)
-{
-}
-
-dma_addr_t
-pci_map_single(struct pci_dev *pdev, void *cpu_addr, size_t size,
-	       int direction)
-{
-	return (dma_addr_t) 0;
-}
-
-void
-pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		 int direction)
-{
-}
-
-int
-pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
-	   int direction)
-{
-	return 0;
-}
-
-void
-pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
-	     int direction)
-{
-}
-
-int
-pci_dma_supported(struct pci_dev *hwdev, dma_addr_t mask)
-{
-	return 0;
-}
-
-/* Generic DMA mapping functions: */
-
-void *
-dma_alloc_coherent(struct device *dev, size_t size,
-		   dma_addr_t *dma_handle, gfp_t gfp)
+static void *alpha_noop_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 
@@ -171,11 +121,22 @@
 	return ret;
 }
 
-EXPORT_SYMBOL(dma_alloc_coherent);
+static void alpha_noop_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_addr)
+{
+	free_pages((unsigned long)cpu_addr, get_order(size));
+}
 
-int
-dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
-	   enum dma_data_direction direction)
+static dma_addr_t alpha_noop_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction dir,
+				      struct dma_attrs *attrs)
+{
+	return page_to_pa(page) + offset;
+}
+
+static int alpha_noop_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
+			     enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	int i;
 	struct scatterlist *sg;
@@ -192,19 +153,37 @@
 	return nents;
 }
 
-EXPORT_SYMBOL(dma_map_sg);
+static int alpha_noop_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return 0;
+}
 
-int
-dma_set_mask(struct device *dev, u64 mask)
+static int alpha_noop_supported(struct device *dev, u64 mask)
+{
+	return mask < 0x00ffffffUL ? 0 : 1;
+}
+
+static int alpha_noop_set_mask(struct device *dev, u64 mask)
 {
 	if (!dev->dma_mask || !dma_supported(dev, mask))
 		return -EIO;
 
 	*dev->dma_mask = mask;
-
 	return 0;
 }
-EXPORT_SYMBOL(dma_set_mask);
+
+struct dma_map_ops alpha_noop_ops = {
+	.alloc_coherent		= alpha_noop_alloc_coherent,
+	.free_coherent		= alpha_noop_free_coherent,
+	.map_page		= alpha_noop_map_page,
+	.map_sg			= alpha_noop_map_sg,
+	.mapping_error		= alpha_noop_mapping_error,
+	.dma_supported		= alpha_noop_supported,
+	.set_dma_mask		= alpha_noop_set_mask,
+};
+
+struct dma_map_ops *dma_ops = &alpha_noop_ops;
+EXPORT_SYMBOL(dma_ops);
 
 void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
 {
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 8449504..ce9e54c 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -216,10 +216,30 @@
 	for (i = 0; i < n; ++i)
 		p[i] = 0;
 }
-
-/* True if the machine supports DAC addressing, and DEV can
-   make use of it given MASK.  */
-static int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
+
+/*
+ * True if the machine supports DAC addressing, and DEV can
+ * make use of it given MASK.
+ */
+static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
+{
+	dma64_addr_t dac_offset = alpha_mv.pci_dac_offset;
+	int ok = 1;
+
+	/* If this is not set, the machine doesn't support DAC at all.  */
+	if (dac_offset == 0)
+		ok = 0;
+
+	/* The device has to be able to address our DAC bit.  */
+	if ((dac_offset & dev->dma_mask) != dac_offset)
+		ok = 0;
+
+	/* If both conditions above are met, we are fine. */
+	DBGA("pci_dac_dma_supported %s from %p\n",
+	     ok ? "yes" : "no", __builtin_return_address(0));
+
+	return ok;
+}
 
 /* Map a single buffer of the indicated size for PCI DMA in streaming
    mode.  The 32-bit PCI bus mastering address to use is returned.
@@ -301,23 +321,36 @@
 	return ret;
 }
 
-dma_addr_t
-pci_map_single(struct pci_dev *pdev, void *cpu_addr, size_t size, int dir)
+/* Helper for generic DMA-mapping functions. */
+static struct pci_dev *alpha_gendev_to_pci(struct device *dev)
 {
-	int dac_allowed; 
+	if (dev && dev->bus == &pci_bus_type)
+		return to_pci_dev(dev);
 
-	if (dir == PCI_DMA_NONE)
-		BUG();
+	/* Assume that non-PCI devices asking for DMA are either ISA or EISA,
+	   BUG() otherwise. */
+	BUG_ON(!isa_bridge);
 
-	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0; 
-	return pci_map_single_1(pdev, cpu_addr, size, dac_allowed);
+	/* Assume non-busmaster ISA DMA when dma_mask is not set (the ISA
+	   bridge is bus master then). */
+	if (!dev || !dev->dma_mask || !*dev->dma_mask)
+		return isa_bridge;
+
+	/* For EISA bus masters, return isa_bridge (it might have smaller
+	   dma_mask due to wiring limitations). */
+	if (*dev->dma_mask >= isa_bridge->dma_mask)
+		return isa_bridge;
+
+	/* This assumes ISA bus master with dma_mask 0xffffff. */
+	return NULL;
 }
-EXPORT_SYMBOL(pci_map_single);
 
-dma_addr_t
-pci_map_page(struct pci_dev *pdev, struct page *page, unsigned long offset,
-	     size_t size, int dir)
+static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page,
+				     unsigned long offset, size_t size,
+				     enum dma_data_direction dir,
+				     struct dma_attrs *attrs)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	int dac_allowed;
 
 	if (dir == PCI_DMA_NONE)
@@ -327,7 +360,6 @@
 	return pci_map_single_1(pdev, (char *)page_address(page) + offset, 
 				size, dac_allowed);
 }
-EXPORT_SYMBOL(pci_map_page);
 
 /* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
    SIZE must match what was provided for in a previous pci_map_single
@@ -335,16 +367,17 @@
    the cpu to the buffer are guaranteed to see whatever the device
    wrote there.  */
 
-void
-pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		 int direction)
+static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
+				 size_t size, enum dma_data_direction dir,
+				 struct dma_attrs *attrs)
 {
 	unsigned long flags;
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	struct pci_controller *hose = pdev ? pdev->sysdata : pci_isa_hose;
 	struct pci_iommu_arena *arena;
 	long dma_ofs, npages;
 
-	if (direction == PCI_DMA_NONE)
+	if (dir == PCI_DMA_NONE)
 		BUG();
 
 	if (dma_addr >= __direct_map_base
@@ -393,25 +426,16 @@
 	DBGA2("pci_unmap_single: sg [%llx,%zx] np %ld from %p\n",
 	      dma_addr, size, npages, __builtin_return_address(0));
 }
-EXPORT_SYMBOL(pci_unmap_single);
-
-void
-pci_unmap_page(struct pci_dev *pdev, dma_addr_t dma_addr,
-	       size_t size, int direction)
-{
-	pci_unmap_single(pdev, dma_addr, size, direction);
-}
-EXPORT_SYMBOL(pci_unmap_page);
 
 /* Allocate and map kernel buffer using consistent mode DMA for PCI
    device.  Returns non-NULL cpu-view pointer to the buffer if
    successful and sets *DMA_ADDRP to the pci side dma address as well,
    else DMA_ADDRP is undefined.  */
 
-void *
-__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
-		       dma_addr_t *dma_addrp, gfp_t gfp)
+static void *alpha_pci_alloc_coherent(struct device *dev, size_t size,
+				      dma_addr_t *dma_addrp, gfp_t gfp)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	void *cpu_addr;
 	long order = get_order(size);
 
@@ -439,13 +463,12 @@
 		gfp |= GFP_DMA;
 		goto try_again;
 	}
-		
+
 	DBGA2("pci_alloc_consistent: %zx -> [%p,%llx] from %p\n",
 	      size, cpu_addr, *dma_addrp, __builtin_return_address(0));
 
 	return cpu_addr;
 }
-EXPORT_SYMBOL(__pci_alloc_consistent);
 
 /* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
    be values that were returned from pci_alloc_consistent.  SIZE must
@@ -453,17 +476,16 @@
    References to the memory and mappings associated with CPU_ADDR or
    DMA_ADDR past this call are illegal.  */
 
-void
-pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu_addr,
-		    dma_addr_t dma_addr)
+static void alpha_pci_free_coherent(struct device *dev, size_t size,
+				    void *cpu_addr, dma_addr_t dma_addr)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL);
 	free_pages((unsigned long)cpu_addr, get_order(size));
 
 	DBGA2("pci_free_consistent: [%llx,%zx] from %p\n",
 	      dma_addr, size, __builtin_return_address(0));
 }
-EXPORT_SYMBOL(pci_free_consistent);
 
 /* Classify the elements of the scatterlist.  Write dma_address
    of each element with:
@@ -626,23 +648,21 @@
 	return 1;
 }
 
-int
-pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
-	   int direction)
+static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
+			    int nents, enum dma_data_direction dir,
+			    struct dma_attrs *attrs)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	struct scatterlist *start, *end, *out;
 	struct pci_controller *hose;
 	struct pci_iommu_arena *arena;
 	dma_addr_t max_dma;
 	int dac_allowed;
-	struct device *dev;
 
-	if (direction == PCI_DMA_NONE)
+	if (dir == PCI_DMA_NONE)
 		BUG();
 
-	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
-
-	dev = pdev ? &pdev->dev : NULL;
+	dac_allowed = dev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
 
 	/* Fast path single entry scatterlists.  */
 	if (nents == 1) {
@@ -699,19 +719,19 @@
 	/* Some allocation failed while mapping the scatterlist
 	   entries.  Unmap them now.  */
 	if (out > start)
-		pci_unmap_sg(pdev, start, out - start, direction);
+		pci_unmap_sg(pdev, start, out - start, dir);
 	return 0;
 }
-EXPORT_SYMBOL(pci_map_sg);
 
 /* Unmap a set of streaming mode DMA translations.  Again, cpu read
    rules concerning calls here are the same as for pci_unmap_single()
    above.  */
 
-void
-pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
-	     int direction)
+static void alpha_pci_unmap_sg(struct device *dev, struct scatterlist *sg,
+			       int nents, enum dma_data_direction dir,
+			       struct dma_attrs *attrs)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	unsigned long flags;
 	struct pci_controller *hose;
 	struct pci_iommu_arena *arena;
@@ -719,7 +739,7 @@
 	dma_addr_t max_dma;
 	dma_addr_t fbeg, fend;
 
-	if (direction == PCI_DMA_NONE)
+	if (dir == PCI_DMA_NONE)
 		BUG();
 
 	if (! alpha_mv.mv_pci_tbi)
@@ -783,15 +803,13 @@
 
 	DBGA("pci_unmap_sg: %ld entries\n", nents - (end - sg));
 }
-EXPORT_SYMBOL(pci_unmap_sg);
-
 
 /* Return whether the given PCI device DMA address mask can be
    supported properly.  */
 
-int
-pci_dma_supported(struct pci_dev *pdev, u64 mask)
+static int alpha_pci_supported(struct device *dev, u64 mask)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	struct pci_controller *hose;
 	struct pci_iommu_arena *arena;
 
@@ -818,7 +836,6 @@
 
 	return 0;
 }
-EXPORT_SYMBOL(pci_dma_supported);
 
 
 /*
@@ -918,66 +935,32 @@
 	return 0;
 }
 
-/* True if the machine supports DAC addressing, and DEV can
-   make use of it given MASK.  */
-
-static int
-pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
+static int alpha_pci_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	dma64_addr_t dac_offset = alpha_mv.pci_dac_offset;
-	int ok = 1;
-
-	/* If this is not set, the machine doesn't support DAC at all.  */
-	if (dac_offset == 0)
-		ok = 0;
-
-	/* The device has to be able to address our DAC bit.  */
-	if ((dac_offset & dev->dma_mask) != dac_offset)
-		ok = 0;
-
-	/* If both conditions above are met, we are fine. */
-	DBGA("pci_dac_dma_supported %s from %p\n",
-	     ok ? "yes" : "no", __builtin_return_address(0));
-
-	return ok;
+	return dma_addr == 0;
 }
 
-/* Helper for generic DMA-mapping functions. */
-
-struct pci_dev *
-alpha_gendev_to_pci(struct device *dev)
-{
-	if (dev && dev->bus == &pci_bus_type)
-		return to_pci_dev(dev);
-
-	/* Assume that non-PCI devices asking for DMA are either ISA or EISA,
-	   BUG() otherwise. */
-	BUG_ON(!isa_bridge);
-
-	/* Assume non-busmaster ISA DMA when dma_mask is not set (the ISA
-	   bridge is bus master then). */
-	if (!dev || !dev->dma_mask || !*dev->dma_mask)
-		return isa_bridge;
-
-	/* For EISA bus masters, return isa_bridge (it might have smaller
-	   dma_mask due to wiring limitations). */
-	if (*dev->dma_mask >= isa_bridge->dma_mask)
-		return isa_bridge;
-
-	/* This assumes ISA bus master with dma_mask 0xffffff. */
-	return NULL;
-}
-EXPORT_SYMBOL(alpha_gendev_to_pci);
-
-int
-dma_set_mask(struct device *dev, u64 mask)
+static int alpha_pci_set_mask(struct device *dev, u64 mask)
 {
 	if (!dev->dma_mask ||
 	    !pci_dma_supported(alpha_gendev_to_pci(dev), mask))
 		return -EIO;
 
 	*dev->dma_mask = mask;
-
 	return 0;
 }
-EXPORT_SYMBOL(dma_set_mask);
+
+struct dma_map_ops alpha_pci_ops = {
+	.alloc_coherent		= alpha_pci_alloc_coherent,
+	.free_coherent		= alpha_pci_free_coherent,
+	.map_page		= alpha_pci_map_page,
+	.unmap_page		= alpha_pci_unmap_page,
+	.map_sg			= alpha_pci_map_sg,
+	.unmap_sg		= alpha_pci_unmap_sg,
+	.mapping_error		= alpha_pci_mapping_error,
+	.dma_supported		= alpha_pci_supported,
+	.set_dma_mask		= alpha_pci_set_mask,
+};
+
+struct dma_map_ops *dma_ops = &alpha_pci_ops;
+EXPORT_SYMBOL(dma_ops);
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
index e072041d..9acadc6 100644
--- a/arch/alpha/kernel/ptrace.c
+++ b/arch/alpha/kernel/ptrace.c
@@ -249,6 +249,17 @@
 	return (nsaved != 0);
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	/* Mark single stepping.  */
+	task_thread_info(child)->bpt_nsaved = -1;
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	ptrace_cancel_bpt(child);
+}
+
 /*
  * Called by kernel/ptrace.c when detaching..
  *
@@ -256,7 +267,7 @@
  */
 void ptrace_disable(struct task_struct *child)
 { 
-	ptrace_cancel_bpt(child);
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -295,52 +306,6 @@
 		DBG(DBG_MEM, ("poke $%ld<-%#lx\n", addr, data));
 		ret = put_reg(child, addr, data);
 		break;
-
-	case PTRACE_SYSCALL:
-		/* continue and stop at next (return from) syscall */
-	case PTRACE_CONT:    /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		/* make sure single-step breakpoint is gone. */
-		ptrace_cancel_bpt(child);
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-	/*
-	 * Make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)
-			break;
-		child->exit_code = SIGKILL;
-		/* make sure single-step breakpoint is gone. */
-		ptrace_cancel_bpt(child);
-		wake_up_process(child);
-		break;
-
-	case PTRACE_SINGLESTEP:  /* execute single instruction. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		/* Mark single stepping.  */
-		task_thread_info(child)->bpt_nsaved = -1;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		wake_up_process(child);
-		/* give it a chance to run. */
-		ret = 0;
-		break;
-
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3b18128..cadfe2e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -155,6 +155,9 @@
 config ZONE_DMA
 	bool
 
+config NEED_DMA_MAP_STATE
+       def_bool y
+
 config GENERIC_ISA_DMA
 	bool
 
@@ -321,10 +324,9 @@
 	bool "Freescale MXC/iMX-based"
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select ARCH_MTD_XIP
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select COMMON_CLKDEV
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -508,7 +510,7 @@
 	  Orion-2 (5281), Orion-1-90 (6183).
 
 config ARCH_MMP
-	bool "Marvell PXA168/910"
+	bool "Marvell PXA168/910/MMP2"
 	depends on MMU
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
@@ -519,7 +521,7 @@
 	select TICK_ONESHOT
 	select PLAT_PXA
 	help
-	  Support for Marvell's PXA168/910 processor line.
+	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
@@ -605,6 +607,11 @@
 	  interface to the ARM9 modem processor which runs the baseband stack
 	  and controls some vital subsystems (clock and power control, etc).
 
+config ARCH_SHMOBILE
+	bool "Renesas SH-Mobile"
+	help
+	  Support for Renesas's SH-Mobile ARM platforms
+
 config ARCH_RPC
 	bool "RiscPC"
 	select ARCH_ACORN
@@ -648,12 +655,43 @@
 
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
+	select PLAT_SAMSUNG
+	select CPU_V6
 	select GENERIC_GPIO
+	select ARM_VIC
 	select HAVE_CLK
+	select NO_IOPORT
 	select ARCH_HAS_CPUFREQ
+	select ARCH_REQUIRE_GPIOLIB
+	select SAMSUNG_CLKSRC
+	select SAMSUNG_IRQ_VIC_TIMER
+	select SAMSUNG_IRQ_UART
+	select S3C_GPIO_TRACK
+	select S3C_GPIO_PULL_UPDOWN
+	select S3C_GPIO_CFG_S3C24XX
+	select S3C_GPIO_CFG_S3C64XX
+	select S3C_DEV_NAND
+	select USB_ARCH_HAS_OHCI
+	select SAMSUNG_GPIOLIB_4BIT
 	help
 	  Samsung S3C64XX series based systems
 
+config ARCH_S5P6440
+	bool "Samsung S5P6440"
+	select CPU_V6
+	select GENERIC_GPIO
+	select HAVE_CLK
+	help
+	  Samsung S5P6440 CPU based systems
+
+config ARCH_S5P6442
+	bool "Samsung S5P6442"
+	select CPU_V6
+	select GENERIC_GPIO
+	select HAVE_CLK
+	help
+	  Samsung S5P6442 CPU based systems
+
 config ARCH_S5PC1XX
 	bool "Samsung S5PC1XX"
 	select GENERIC_GPIO
@@ -663,6 +701,15 @@
 	help
 	  Samsung S5PC1XX series based systems
 
+config ARCH_S5PV210
+	bool "Samsung S5PV210/S5PC110"
+	select CPU_V7
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select ARM_L1_CACHE_SHIFT_6
+	help
+	  Samsung S5PV210/S5PC110 series based systems
+
 config ARCH_SHARK
 	bool "Shark"
 	select CPU_SA110
@@ -828,8 +875,7 @@
 
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
-source "arch/arm/plat-s3c64xx/Kconfig"
-source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5p/Kconfig"
 source "arch/arm/plat-s5pc1xx/Kconfig"
 
 if ARCH_S3C2410
@@ -837,21 +883,27 @@
 source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"
 source "arch/arm/mach-s3c2440/Kconfig"
-source "arch/arm/mach-s3c2442/Kconfig"
 source "arch/arm/mach-s3c2443/Kconfig"
 endif
 
 if ARCH_S3C64XX
-source "arch/arm/mach-s3c6400/Kconfig"
-source "arch/arm/mach-s3c6410/Kconfig"
+source "arch/arm/mach-s3c64xx/Kconfig"
 endif
 
-source "arch/arm/plat-stmp3xxx/Kconfig"
+source "arch/arm/mach-s5p6440/Kconfig"
+
+source "arch/arm/mach-s5p6442/Kconfig"
 
 if ARCH_S5PC1XX
 source "arch/arm/mach-s5pc100/Kconfig"
 endif
 
+source "arch/arm/mach-s5pv210/Kconfig"
+
+source "arch/arm/mach-shmobile/Kconfig"
+
+source "arch/arm/plat-stmp3xxx/Kconfig"
+
 source "arch/arm/mach-u300/Kconfig"
 
 source "arch/arm/mach-ux500/Kconfig"
@@ -1117,7 +1169,7 @@
 config HZ
 	int
 	default 128 if ARCH_L7200
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410
+	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5cb9326..91344af 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -117,7 +117,7 @@
 	  cause the debug messages to appear on the first serial port.
 
 config DEBUG_S3C_UART
-	depends on PLAT_S3C
+	depends on PLAT_SAMSUNG
 	int "S3C UART to use for low-level debug"
 	default "0"
 	help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 81f54ca..ed820e7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -146,6 +146,7 @@
 machine-$(CONFIG_ARCH_MX2)		:= mx2
 machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
@@ -159,12 +160,16 @@
 machine-$(CONFIG_ARCH_PXA)		:= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		:= realview
 machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
-machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
+machine-$(CONFIG_ARCH_S5P6440)		:= s5p6440
+machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
 machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
+machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
+machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
 machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
 machine-$(CONFIG_ARCH_U300)		:= u300
@@ -178,14 +183,15 @@
 # by CONFIG_* macro name.
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
+plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
-plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
-plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx samsung
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx samsung
+plat-$(CONFIG_PLAT_S5P)		:= s5p samsung
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
index df7bc70..8b0de41 100644
--- a/arch/arm/boot/bootp/init.S
+++ b/arch/arm/boot/bootp/init.S
@@ -49,7 +49,7 @@
 /*
  * find the end of the tag list, and then add an INITRD tag on the end.
  * If there is already an INITRD tag, then we ignore it; the last INITRD
- * tag takes precidence.
+ * tag takes precedence.
  */
 taglist:	ldr	r10, [r9, #0]		@ tag length
 		teq	r10, #0			@ last tag (zero length)?
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 99b75aa..535a91d 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -170,8 +170,8 @@
 
 		.text
 		adr	r0, LC0
- ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}	)
- THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip}	)
+ ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
+ THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip}	)
  THUMB(		ldr	sp, [r0, #28]				)
 		subs	r0, r0, r1		@ calculate the delta offset
 
@@ -182,12 +182,13 @@
 		/*
 		 * We're running at a different address.  We need to fix
 		 * up various pointers:
-		 *   r5 - zImage base address
-		 *   r6 - GOT start
+		 *   r5 - zImage base address (_start)
+		 *   r6 - size of decompressed image
+		 *   r11 - GOT start
 		 *   ip - GOT end
 		 */
 		add	r5, r5, r0
-		add	r6, r6, r0
+		add	r11, r11, r0
 		add	ip, ip, r0
 
 #ifndef CONFIG_ZBOOT_ROM
@@ -205,10 +206,10 @@
 		/*
 		 * Relocate all entries in the GOT table.
 		 */
-1:		ldr	r1, [r6, #0]		@ relocate entries in the GOT
+1:		ldr	r1, [r11, #0]		@ relocate entries in the GOT
 		add	r1, r1, r0		@ table.  This fixes up the
-		str	r1, [r6], #4		@ C references.
-		cmp	r6, ip
+		str	r1, [r11], #4		@ C references.
+		cmp	r11, ip
 		blo	1b
 #else
 
@@ -216,12 +217,12 @@
 		 * Relocate entries in the GOT table.  We only relocate
 		 * the entries that are outside the (relocated) BSS region.
 		 */
-1:		ldr	r1, [r6, #0]		@ relocate entries in the GOT
+1:		ldr	r1, [r11, #0]		@ relocate entries in the GOT
 		cmp	r1, r2			@ entry < bss_start ||
 		cmphs	r3, r1			@ _end < entry
 		addlo	r1, r1, r0		@ table.  This fixes up the
-		str	r1, [r6], #4		@ C references.
-		cmp	r6, ip
+		str	r1, [r11], #4		@ C references.
+		cmp	r11, ip
 		blo	1b
 #endif
 
@@ -247,6 +248,7 @@
  * Check to see if we will overwrite ourselves.
  *   r4 = final kernel address
  *   r5 = start of this image
+ *   r6 = size of decompressed image
  *   r2 = end of malloc space (and therefore this image)
  * We basically want:
  *   r4 >= r2 -> OK
@@ -254,8 +256,7 @@
  */
 		cmp	r4, r2
 		bhs	wont_overwrite
-		sub	r3, sp, r5		@ > compressed kernel size
-		add	r0, r4, r3, lsl #2	@ allow for 4x expansion
+		add	r0, r4, r6
 		cmp	r0, r5
 		bls	wont_overwrite
 
@@ -271,7 +272,6 @@
  * r1-r3  = unused
  * r4     = kernel execution address
  * r5     = decompressed kernel start
- * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
  * r9-r12,r14 = corrupted
@@ -312,7 +312,8 @@
 		.word	_end			@ r3
 		.word	zreladdr		@ r4
 		.word	_start			@ r5
-		.word	_got_start		@ r6
+		.word	_image_size		@ r6
+		.word	_got_start		@ r11
 		.word	_got_end		@ ip
 		.word	user_stack+4096		@ sp
 LC1:		.word	reloc_end - reloc_start
@@ -336,7 +337,6 @@
  *
  * On entry,
  *  r4 = kernel execution address
- *  r6 = processor ID
  *  r7 = architecture number
  *  r8 = atags pointer
  *  r9 = run-time address of "start"  (???)
@@ -542,7 +542,6 @@
  * r1-r3  = unused
  * r4     = kernel execution address
  * r5     = decompressed kernel start
- * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
  * r9-r12,r14 = corrupted
@@ -581,19 +580,19 @@
  *  r1  = corrupted
  *  r2  = corrupted
  *  r3  = block offset
- *  r6  = corrupted
+ *  r9  = corrupted
  *  r12 = corrupted
  */
 
 call_cache_fn:	adr	r12, proc_types
 #ifdef CONFIG_CPU_CP15
-		mrc	p15, 0, r6, c0, c0	@ get processor ID
+		mrc	p15, 0, r9, c0, c0	@ get processor ID
 #else
-		ldr	r6, =CONFIG_PROCESSOR_ID
+		ldr	r9, =CONFIG_PROCESSOR_ID
 #endif
 1:		ldr	r1, [r12, #0]		@ get value
 		ldr	r2, [r12, #4]		@ get mask
-		eor	r1, r1, r6		@ (real ^ match)
+		eor	r1, r1, r9		@ (real ^ match)
 		tst	r1, r2			@       & mask
  ARM(		addeq	pc, r12, r3		) @ call cache function
  THUMB(		addeq	r12, r3			)
@@ -778,8 +777,7 @@
  * Turn off the Cache and MMU.  ARMv3 does not support
  * reading the control register, but ARMv4 does.
  *
- * On entry,  r6 = processor ID
- * On exit,   r0, r1, r2, r3, r12 corrupted
+ * On exit, r0, r1, r2, r3, r9, r12 corrupted
  * This routine must preserve: r4, r6, r7
  */
 		.align	5
@@ -852,10 +850,8 @@
 /*
  * Clean and flush the cache to maintain consistency.
  *
- * On entry,
- *  r6 = processor ID
  * On exit,
- *  r1, r2, r3, r11, r12 corrupted
+ *  r1, r2, r3, r9, r11, r12 corrupted
  * This routine must preserve:
  *  r0, r4, r5, r6, r7
  */
@@ -967,7 +963,7 @@
 		mov	r2, #64*1024		@ default: 32K dcache size (*2)
 		mov	r11, #32		@ default: 32 byte line size
 		mrc	p15, 0, r3, c0, c0, 1	@ read cache type
-		teq	r3, r6			@ cache ID register present?
+		teq	r3, r9			@ cache ID register present?
 		beq	no_cache_id
 		mov	r1, r3, lsr #18
 		and	r1, r1, #7
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 7ca9ecf..d081689 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -43,6 +43,9 @@
 
   _etext = .;
 
+  /* Assume size of decompressed image is 4x the compressed image */
+  _image_size = (_etext - _text) * 4;
+
   _got_start = .;
   .got			: { *(.got) }
   _got_end = .;
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 446b696..6416d5b 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -32,7 +32,7 @@
  *  If an entry has a device ID, it must match
  *  If an entry has a connection ID, it must match
  * Then we take the most specific entry - with the following
- * order of precidence: dev+con > dev only > con only.
+ * order of precedence: dev+con > dev only > con only.
  */
 static struct clk *clk_find(const char *dev_id, const char *con_id)
 {
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 2793447..ee1d3b8 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -272,33 +272,6 @@
 		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
 }
 
-/*
- * We override these so we properly do dmabounce otherwise drivers
- * are able to set the dma_mask to 0xffffffff and we can no longer
- * trap bounces. :(
- *
- * We just return true on everyhing except for < 64MB in which case
- * we will fail miseralby and die since we can't handle that case.
- */
-int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask);
-	if (mask >= PHYS_OFFSET + SZ_64M - 1)
-		return 0;
-
-	return -EIO;
-}
-
-int
-pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask);
-	if (mask >= PHYS_OFFSET + SZ_64M - 1)
-		return 0;
-
-	return -EIO;
-}
-
 int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	it8152_io.start = IT8152_IO_BASE + 0x12000;
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index bd36c77..90ae00b 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -32,6 +32,12 @@
 
 #include <asm/hardware/locomo.h>
 
+/* LoCoMo Interrupts */
+#define IRQ_LOCOMO_KEY		(0)
+#define IRQ_LOCOMO_GPIO		(1)
+#define IRQ_LOCOMO_LT		(2)
+#define IRQ_LOCOMO_SPI		(3)
+
 /* M62332 output channel selection */
 #define M62332_EVR_CH	1	/* M62332 volume channel number  */
 				/*   0 : CH.1 , 1 : CH. 2        */
@@ -58,6 +64,7 @@
 	struct device *dev;
 	unsigned long phys;
 	unsigned int irq;
+	int irq_base;
 	spinlock_t lock;
 	void __iomem *base;
 #ifdef CONFIG_PM
@@ -81,9 +88,7 @@
 static struct locomo_dev_info locomo_devices[] = {
 	{
 		.devid 		= LOCOMO_DEVID_KEYBOARD,
-		.irq = {
-			IRQ_LOCOMO_KEY,
-		},
+		.irq		= { IRQ_LOCOMO_KEY },
 		.name		= "locomo-keyboard",
 		.offset		= LOCOMO_KEYBOARD,
 		.length		= 16,
@@ -133,53 +138,20 @@
 	},
 };
 
-
-/** LoCoMo interrupt handling stuff.
- * NOTE: LoCoMo has a 1 to many mapping on all of its IRQs.
- * that is, there is only one real hardware interrupt
- * we determine which interrupt it is by reading some IO memory.
- * We have two levels of expansion, first in the handler for the
- * hardware interrupt we generate an interrupt
- * IRQ_LOCOMO_*_BASE and those handlers generate more interrupts
- *
- * hardware irq reads LOCOMO_ICR & 0x0f00
- *   IRQ_LOCOMO_KEY_BASE
- *   IRQ_LOCOMO_GPIO_BASE
- *   IRQ_LOCOMO_LT_BASE
- *   IRQ_LOCOMO_SPI_BASE
- * IRQ_LOCOMO_KEY_BASE reads LOCOMO_KIC & 0x0001
- *   IRQ_LOCOMO_KEY
- * IRQ_LOCOMO_GPIO_BASE reads LOCOMO_GIR & LOCOMO_GPD & 0xffff
- *   IRQ_LOCOMO_GPIO[0-15]
- * IRQ_LOCOMO_LT_BASE reads LOCOMO_LTINT & 0x0001
- *   IRQ_LOCOMO_LT
- * IRQ_LOCOMO_SPI_BASE reads LOCOMO_SPIIR & 0x000F
- *   IRQ_LOCOMO_SPI_RFR
- *   IRQ_LOCOMO_SPI_RFW
- *   IRQ_LOCOMO_SPI_OVRN
- *   IRQ_LOCOMO_SPI_TEND
- */
-
-#define LOCOMO_IRQ_START	(IRQ_LOCOMO_KEY_BASE)
-#define LOCOMO_IRQ_KEY_START	(IRQ_LOCOMO_KEY)
-#define	LOCOMO_IRQ_GPIO_START	(IRQ_LOCOMO_GPIO0)
-#define	LOCOMO_IRQ_LT_START	(IRQ_LOCOMO_LT)
-#define	LOCOMO_IRQ_SPI_START	(IRQ_LOCOMO_SPI_RFR)
-
 static void locomo_handler(unsigned int irq, struct irq_desc *desc)
 {
+	struct locomo *lchip = get_irq_chip_data(irq);
 	int req, i;
-	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	/* Acknowledge the parent IRQ */
 	desc->chip->ack(irq);
 
 	/* check why this interrupt was generated */
-	req = locomo_readl(mapbase + LOCOMO_ICR) & 0x0f00;
+	req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00;
 
 	if (req) {
 		/* generate the next interrupt(s) */
-		irq = LOCOMO_IRQ_START;
+		irq = lchip->irq_base;
 		for (i = 0; i <= 3; i++, irq++) {
 			if (req & (0x0100 << i)) {
 				generic_handle_irq(irq);
@@ -195,20 +167,20 @@
 
 static void locomo_mask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct locomo *lchip = get_irq_chip_data(irq);
 	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_ICR);
-	r &= ~(0x0010 << (irq - LOCOMO_IRQ_START));
-	locomo_writel(r, mapbase + LOCOMO_ICR);
+	r = locomo_readl(lchip->base + LOCOMO_ICR);
+	r &= ~(0x0010 << (irq - lchip->irq_base));
+	locomo_writel(r, lchip->base + LOCOMO_ICR);
 }
 
 static void locomo_unmask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct locomo *lchip = get_irq_chip_data(irq);
 	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_ICR);
-	r |= (0x0010 << (irq - LOCOMO_IRQ_START));
-	locomo_writel(r, mapbase + LOCOMO_ICR);
+	r = locomo_readl(lchip->base + LOCOMO_ICR);
+	r |= (0x0010 << (irq - lchip->irq_base));
+	locomo_writel(r, lchip->base + LOCOMO_ICR);
 }
 
 static struct irq_chip locomo_chip = {
@@ -218,297 +190,22 @@
 	.unmask	= locomo_unmask_irq,
 };
 
-static void locomo_key_handler(unsigned int irq, struct irq_desc *desc)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
-		generic_handle_irq(LOCOMO_IRQ_KEY_START);
-	}
-}
-
-static void locomo_key_ack_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-	r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START));
-	locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static void locomo_key_mask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-	r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START));
-	locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static void locomo_key_unmask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-	r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START));
-	locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static struct irq_chip locomo_key_chip = {
-	.name	= "LOCOMO-key",
-	.ack	= locomo_key_ack_irq,
-	.mask	= locomo_key_mask_irq,
-	.unmask	= locomo_key_unmask_irq,
-};
-
-static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int req, i;
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	req = 	locomo_readl(mapbase + LOCOMO_GIR) &
-		locomo_readl(mapbase + LOCOMO_GPD) &
-		0xffff;
-
-	if (req) {
-		irq = LOCOMO_IRQ_GPIO_START;
-		for (i = 0; i <= 15; i++, irq++) {
-			if (req & (0x0001 << i)) {
-				generic_handle_irq(irq);
-			}
-		}
-	}
-}
-
-static void locomo_gpio_ack_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_GWE);
-	r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GWE);
-
-	r = locomo_readl(mapbase + LOCOMO_GIS);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GIS);
-
-	r = locomo_readl(mapbase + LOCOMO_GWE);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GWE);
-}
-
-static void locomo_gpio_mask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_GIE);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GIE);
-}
-
-static void locomo_gpio_unmask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_GIE);
-	r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GIE);
-}
-
-static int GPIO_IRQ_rising_edge;
-static int GPIO_IRQ_falling_edge;
-
-static int locomo_gpio_type(unsigned int irq, unsigned int type)
-{
-	unsigned int mask;
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
-
-	if (type == IRQ_TYPE_PROBE) {
-		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
-			return 0;
-		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	if (type & IRQ_TYPE_EDGE_RISING)
-		GPIO_IRQ_rising_edge |= mask;
-	else
-		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		GPIO_IRQ_falling_edge |= mask;
-	else
-		GPIO_IRQ_falling_edge &= ~mask;
-	locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE);
-	locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE);
-
-	return 0;
-}
-
-static struct irq_chip locomo_gpio_chip = {
-	.name	  = "LOCOMO-gpio",
-	.ack	  = locomo_gpio_ack_irq,
-	.mask	  = locomo_gpio_mask_irq,
-	.unmask	  = locomo_gpio_unmask_irq,
-	.set_type = locomo_gpio_type,
-};
-
-static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
-		generic_handle_irq(LOCOMO_IRQ_LT_START);
-	}
-}
-
-static void locomo_lt_ack_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_LTINT);
-	r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START));
-	locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static void locomo_lt_mask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_LTINT);
-	r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START));
-	locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static void locomo_lt_unmask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_LTINT);
-	r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START));
-	locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static struct irq_chip locomo_lt_chip = {
-	.name	= "LOCOMO-lt",
-	.ack	= locomo_lt_ack_irq,
-	.mask	= locomo_lt_mask_irq,
-	.unmask	= locomo_lt_unmask_irq,
-};
-
-static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int req, i;
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
-	if (req) {
-		irq = LOCOMO_IRQ_SPI_START;
-
-		for (i = 0; i <= 3; i++, irq++) {
-			if (req & (0x0001 << i)) {
-				generic_handle_irq(irq);
-			}
-		}
-	}
-}
-
-static void locomo_spi_ack_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-	r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
-
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-}
-
-static void locomo_spi_mask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-}
-
-static void locomo_spi_unmask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-	r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-}
-
-static struct irq_chip locomo_spi_chip = {
-	.name	= "LOCOMO-spi",
-	.ack	= locomo_spi_ack_irq,
-	.mask	= locomo_spi_mask_irq,
-	.unmask	= locomo_spi_unmask_irq,
-};
-
 static void locomo_setup_irq(struct locomo *lchip)
 {
-	int irq;
-	void __iomem *irqbase = lchip->base;
+	int irq = lchip->irq_base;
 
 	/*
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
 	set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
-	set_irq_chip_data(lchip->irq, irqbase);
+	set_irq_chip_data(lchip->irq, lchip);
 	set_irq_chained_handler(lchip->irq, locomo_handler);
 
-	/* Install handlers for IRQ_LOCOMO_*_BASE */
-	set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
-	set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
-	set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
-
-	set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
-	set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
-	set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
-
-	set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
-	set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
-	set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
-
-	set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
-	set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
-	set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
-
-	/* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
-	set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
-	set_irq_chip_data(LOCOMO_IRQ_KEY_START, irqbase);
-	set_irq_handler(LOCOMO_IRQ_KEY_START, handle_edge_irq);
-	set_irq_flags(LOCOMO_IRQ_KEY_START, IRQF_VALID | IRQF_PROBE);
-
-	/* install handlers for IRQ_LOCOMO_GPIO_BASE generated interrupts */
-	for (irq = LOCOMO_IRQ_GPIO_START; irq < LOCOMO_IRQ_GPIO_START + 16; irq++) {
-		set_irq_chip(irq, &locomo_gpio_chip);
-		set_irq_chip_data(irq, irqbase);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* install handlers for IRQ_LOCOMO_LT_BASE generated interrupts */
-	set_irq_chip(LOCOMO_IRQ_LT_START, &locomo_lt_chip);
-	set_irq_chip_data(LOCOMO_IRQ_LT_START, irqbase);
-	set_irq_handler(LOCOMO_IRQ_LT_START, handle_edge_irq);
-	set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
-
-	/* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
-	for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) {
-		set_irq_chip(irq, &locomo_spi_chip);
-		set_irq_chip_data(irq, irqbase);
-		set_irq_handler(irq, handle_edge_irq);
+	/* Install handlers for IRQ_LOCOMO_* */
+	for ( ; irq <= lchip->irq_base + 3; irq++) {
+		set_irq_chip(irq, &locomo_chip);
+		set_irq_chip_data(irq, lchip);
+		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 }
@@ -555,7 +252,8 @@
 		dev->mapbase = 0;
 	dev->length = info->length;
 
-	memmove(dev->irq, info->irq, sizeof(dev->irq));
+	dev->irq[0] = (lchip->irq_base == NO_IRQ) ?
+			NO_IRQ : lchip->irq_base + info->irq[0];
 
 	ret = device_register(&dev->dev);
 	if (ret) {
@@ -672,6 +370,7 @@
 static int
 __locomo_probe(struct device *me, struct resource *mem, int irq)
 {
+	struct locomo_platform_data *pdata = me->platform_data;
 	struct locomo *lchip;
 	unsigned long r;
 	int i, ret = -ENODEV;
@@ -687,6 +386,7 @@
 
 	lchip->phys = mem->start;
 	lchip->irq = irq;
+	lchip->irq_base = (pdata) ? pdata->irq_base : NO_IRQ;
 
 	/*
 	 * Map the whole region.  This also maps the
@@ -753,7 +453,7 @@
 	 * The interrupt controller must be initialised before any
 	 * other device to ensure that the interrupts are available.
 	 */
-	if (lchip->irq != NO_IRQ)
+	if (lchip->irq != NO_IRQ && lchip->irq_base != NO_IRQ)
 		locomo_setup_irq(lchip);
 
 	for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 8ba7044..a52a27c 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -35,6 +35,58 @@
 
 #include <asm/hardware/sa1111.h>
 
+/* SA1111 IRQs */
+#define IRQ_GPAIN0		(0)
+#define IRQ_GPAIN1		(1)
+#define IRQ_GPAIN2		(2)
+#define IRQ_GPAIN3		(3)
+#define IRQ_GPBIN0		(4)
+#define IRQ_GPBIN1		(5)
+#define IRQ_GPBIN2		(6)
+#define IRQ_GPBIN3		(7)
+#define IRQ_GPBIN4		(8)
+#define IRQ_GPBIN5		(9)
+#define IRQ_GPCIN0		(10)
+#define IRQ_GPCIN1		(11)
+#define IRQ_GPCIN2		(12)
+#define IRQ_GPCIN3		(13)
+#define IRQ_GPCIN4		(14)
+#define IRQ_GPCIN5		(15)
+#define IRQ_GPCIN6		(16)
+#define IRQ_GPCIN7		(17)
+#define IRQ_MSTXINT		(18)
+#define IRQ_MSRXINT		(19)
+#define IRQ_MSSTOPERRINT	(20)
+#define IRQ_TPTXINT		(21)
+#define IRQ_TPRXINT		(22)
+#define IRQ_TPSTOPERRINT	(23)
+#define SSPXMTINT		(24)
+#define SSPRCVINT		(25)
+#define SSPROR			(26)
+#define AUDXMTDMADONEA		(32)
+#define AUDRCVDMADONEA		(33)
+#define AUDXMTDMADONEB		(34)
+#define AUDRCVDMADONEB		(35)
+#define AUDTFSR			(36)
+#define AUDRFSR			(37)
+#define AUDTUR			(38)
+#define AUDROR			(39)
+#define AUDDTS			(40)
+#define AUDRDD			(41)
+#define AUDSTO			(42)
+#define IRQ_USBPWR		(43)
+#define IRQ_HCIM		(44)
+#define IRQ_HCIBUFFACC		(45)
+#define IRQ_HCIRMTWKP		(46)
+#define IRQ_NHCIMFCIR		(47)
+#define IRQ_USB_PORT_RESUME	(48)
+#define IRQ_S0_READY_NINT	(49)
+#define IRQ_S1_READY_NINT	(50)
+#define IRQ_S0_CD_VALID		(51)
+#define IRQ_S1_CD_VALID		(52)
+#define IRQ_S0_BVD1_STSCHG	(53)
+#define IRQ_S1_BVD1_STSCHG	(54)
+
 extern void __init sa1110_mb_enable(void);
 
 /*
@@ -49,6 +101,7 @@
 	struct clk	*clk;
 	unsigned long	phys;
 	int		irq;
+	int		irq_base;	/* base for cascaded on-chip IRQs */
 	spinlock_t	lock;
 	void __iomem	*base;
 #ifdef CONFIG_PM
@@ -152,36 +205,37 @@
 sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int stat0, stat1, i;
-	void __iomem *base = get_irq_data(irq);
+	struct sa1111 *sachip = get_irq_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 
-	stat0 = sa1111_readl(base + SA1111_INTSTATCLR0);
-	stat1 = sa1111_readl(base + SA1111_INTSTATCLR1);
+	stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0);
+	stat1 = sa1111_readl(mapbase + SA1111_INTSTATCLR1);
 
-	sa1111_writel(stat0, base + SA1111_INTSTATCLR0);
+	sa1111_writel(stat0, mapbase + SA1111_INTSTATCLR0);
 
 	desc->chip->ack(irq);
 
-	sa1111_writel(stat1, base + SA1111_INTSTATCLR1);
+	sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1);
 
 	if (stat0 == 0 && stat1 == 0) {
 		do_bad_IRQ(irq, desc);
 		return;
 	}
 
-	for (i = IRQ_SA1111_START; stat0; i++, stat0 >>= 1)
+	for (i = 0; stat0; i++, stat0 >>= 1)
 		if (stat0 & 1)
-			handle_edge_irq(i, irq_desc + i);
+			generic_handle_irq(i + sachip->irq_base);
 
-	for (i = IRQ_SA1111_START + 32; stat1; i++, stat1 >>= 1)
+	for (i = 32; stat1; i++, stat1 >>= 1)
 		if (stat1 & 1)
-			handle_edge_irq(i, irq_desc + i);
+			generic_handle_irq(i + sachip->irq_base);
 
 	/* For level-based interrupts */
 	desc->chip->unmask(irq);
 }
 
-#define SA1111_IRQMASK_LO(x)	(1 << (x - IRQ_SA1111_START))
-#define SA1111_IRQMASK_HI(x)	(1 << (x - IRQ_SA1111_START - 32))
+#define SA1111_IRQMASK_LO(x)	(1 << (x - sachip->irq_base))
+#define SA1111_IRQMASK_HI(x)	(1 << (x - sachip->irq_base - 32))
 
 static void sa1111_ack_irq(unsigned int irq)
 {
@@ -189,7 +243,8 @@
 
 static void sa1111_mask_lowirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned long ie0;
 
 	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -199,7 +254,8 @@
 
 static void sa1111_unmask_lowirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned long ie0;
 
 	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -216,8 +272,9 @@
  */
 static int sa1111_retrigger_lowirq(unsigned int irq)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_LO(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip0;
 	int i;
 
@@ -237,8 +294,9 @@
 
 static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_LO(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip0;
 
 	if (flags == IRQ_TYPE_PROBE)
@@ -260,8 +318,9 @@
 
 static int sa1111_wake_lowirq(unsigned int irq, unsigned int on)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_LO(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long we0;
 
 	we0 = sa1111_readl(mapbase + SA1111_WAKEEN0);
@@ -286,7 +345,8 @@
 
 static void sa1111_mask_highirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned long ie1;
 
 	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -296,7 +356,8 @@
 
 static void sa1111_unmask_highirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned long ie1;
 
 	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -313,8 +374,9 @@
  */
 static int sa1111_retrigger_highirq(unsigned int irq)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_HI(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip1;
 	int i;
 
@@ -334,8 +396,9 @@
 
 static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_HI(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip1;
 
 	if (flags == IRQ_TYPE_PROBE)
@@ -357,8 +420,9 @@
 
 static int sa1111_wake_highirq(unsigned int irq, unsigned int on)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_HI(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long we1;
 
 	we1 = sa1111_readl(mapbase + SA1111_WAKEEN1);
@@ -412,14 +476,14 @@
 
 	for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) {
 		set_irq_chip(irq, &sa1111_low_chip);
-		set_irq_chip_data(irq, irqbase);
+		set_irq_chip_data(irq, sachip);
 		set_irq_handler(irq, handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
 	for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) {
 		set_irq_chip(irq, &sa1111_high_chip);
-		set_irq_chip_data(irq, irqbase);
+		set_irq_chip_data(irq, sachip);
 		set_irq_handler(irq, handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
@@ -428,7 +492,7 @@
 	 * Register SA1111 interrupt
 	 */
 	set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
-	set_irq_data(sachip->irq, irqbase);
+	set_irq_data(sachip->irq, sachip);
 	set_irq_chained_handler(sachip->irq, sa1111_irq_handler);
 }
 
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 37bda5f..9012004 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -140,6 +140,7 @@
 EXPORT_SYMBOL(read_scoop_reg);
 EXPORT_SYMBOL(write_scoop_reg);
 
+#ifdef CONFIG_PM
 static void check_scoop_reg(struct scoop_dev *sdev)
 {
 	unsigned short mcr;
@@ -149,7 +150,6 @@
 		iowrite16(0x0101, sdev->base + SCOOP_MCR);
 }
 
-#ifdef CONFIG_PM
 static int scoop_suspend(struct platform_device *dev, pm_message_t state)
 {
 	struct scoop_dev *sdev = platform_get_drvdata(dev);
diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig
new file mode 100644
index 0000000..e14229b
--- /dev/null
+++ b/arch/arm/configs/ap4evb_defconfig
@@ -0,0 +1,779 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc7
+# Mon Feb  8 12:25:36 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# SH-Mobile System Type
+#
+# CONFIG_ARCH_SH7367 is not set
+# CONFIG_ARCH_SH7377 is not set
+CONFIG_ARCH_SH7372=y
+
+#
+# SH-Mobile Board Type
+#
+CONFIG_MACH_AP4EVB=y
+
+#
+# SH-Mobile System Configuration
+#
+
+#
+# Memory configuration
+#
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x10000000
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_CMT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig
new file mode 100644
index 0000000..3c19031
--- /dev/null
+++ b/arch/arm/configs/g3evm_defconfig
@@ -0,0 +1,774 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc7
+# Mon Feb  8 12:20:01 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# SH-Mobile System Type
+#
+CONFIG_ARCH_SH7367=y
+# CONFIG_ARCH_SH7377 is not set
+# CONFIG_ARCH_SH7372 is not set
+
+#
+# SH-Mobile Board Type
+#
+CONFIG_MACH_G3EVM=y
+
+#
+# SH-Mobile System Configuration
+#
+
+#
+# Memory configuration
+#
+CONFIG_MEMORY_START=0x50000000
+CONFIG_MEMORY_SIZE=0x08000000
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_CMT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig
new file mode 100644
index 0000000..8ee79a5
--- /dev/null
+++ b/arch/arm/configs/g4evm_defconfig
@@ -0,0 +1,779 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc7
+# Mon Feb  8 12:21:35 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# SH-Mobile System Type
+#
+# CONFIG_ARCH_SH7367 is not set
+CONFIG_ARCH_SH7377=y
+# CONFIG_ARCH_SH7372 is not set
+
+#
+# SH-Mobile Board Type
+#
+CONFIG_MACH_G4EVM=y
+
+#
+# SH-Mobile System Configuration
+#
+
+#
+# Memory configuration
+#
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x08000000
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_CMT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
new file mode 100644
index 0000000..95d2bec
--- /dev/null
+++ b/arch/arm/configs/imote2_defconfig
@@ -0,0 +1,2077 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc8
+# Sat Feb 13 21:48:53 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Intel/Marvell Dev Platforms (sorted by hardware release time)
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_ZYLONITE300 is not set
+# CONFIG_MACH_ZYLONITE320 is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+
+#
+# Third Party Dev Platforms (sorted by vendor name)
+#
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_MACH_ARCOM_ZEUS is not set
+# CONFIG_MACH_BALLOON3 is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+CONFIG_MACH_INTELMOTE2=y
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_MACH_XCEP is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+
+#
+# End-user Products (sorted by vendor name)
+#
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_PXA_EZX is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_PM_RUNTIME=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=y
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+# CONFIG_BT_ATH3K is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_DRBD is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_IEEE802154_DRIVERS=y
+# CONFIG_IEEE802154_FAKEHARD is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+CONFIG_KEYBOARD_PXA27x=y
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_DA9034=y
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_DA9030 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+CONFIG_IR_CORE=y
+CONFIG_VIDEO_IR=y
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=y
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=y
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_SOC_CAMERA_OV9640 is not set
+CONFIG_VIDEO_PXA27x=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+CONFIG_RADIO_TEA5764=y
+CONFIG_RADIO_TEA5764_XTAL=y
+# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_DA903X is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_PXA2XX_LIB=y
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+# CONFIG_SND_PXA2XX_SOC_IMOTE2 is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_APPLE=m
+# CONFIG_HID_WACOM is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_LP3944=y
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DA903X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 5fc44c9..4611d3c 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Sat Nov  7 20:31:18 2009
+# Linux kernel version: 2.6.33-rc6
+# Thu Feb  4 23:08:54 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -32,6 +32,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -45,6 +51,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -127,14 +134,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -163,6 +197,7 @@
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 CONFIG_ARCH_KIRKWOOD=y
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -185,6 +220,7 @@
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 
 #
 # Marvell Kirkwood Implementations
@@ -195,7 +231,11 @@
 CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
+CONFIG_MACH_TS41X=y
+CONFIG_MACH_OPENRD=y
 CONFIG_MACH_OPENRD_BASE=y
+CONFIG_MACH_OPENRD_CLIENT=y
+CONFIG_MACH_NETSPACE_V2=y
 CONFIG_PLAT_ORION=y
 
 #
@@ -262,12 +302,10 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
@@ -398,15 +436,18 @@
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
 CONFIG_CFG80211=y
 # CONFIG_NL80211_TESTMODE is not set
 # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
 # CONFIG_CFG80211_DEBUGFS is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
+CONFIG_CFG80211_WEXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
 # CONFIG_LIB80211_DEBUG is not set
@@ -556,6 +597,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -606,7 +651,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -642,6 +689,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -696,15 +744,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_SCH is not set
@@ -720,7 +769,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -828,13 +877,6 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_ATMEL is not set
 # CONFIG_AT76C50X_USB is not set
@@ -846,19 +888,24 @@
 # CONFIG_ADM8211 is not set
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_MWL8K is not set
-# CONFIG_P54_COMMON is not set
 # CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
 # CONFIG_IWLWIFI is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_HERMES is not set
-# CONFIG_WL12XX is not set
 # CONFIG_IWM is not set
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -881,6 +928,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -890,6 +938,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -933,6 +982,7 @@
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -1019,11 +1069,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1032,7 +1077,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1048,6 +1092,8 @@
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
 CONFIG_SPI_ORION=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -1074,10 +1120,12 @@
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1116,6 +1164,7 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -1123,6 +1172,8 @@
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1305,6 +1356,7 @@
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
 # CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 CONFIG_MMC=y
@@ -1344,6 +1396,7 @@
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -1388,6 +1441,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1417,7 +1471,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1684,7 +1740,9 @@
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -1692,7 +1750,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index d2a90eb8..ff44bd1 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -184,7 +184,7 @@
 CONFIG_S3C24XX_GPIO_EXTRA=0
 CONFIG_S3C2410_DMA=y
 # CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_S3C24XX_ADC=y
+CONFIG_S3C_ADC=y
 CONFIG_PLAT_S3C=y
 CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
 CONFIG_CPU_LLSERIAL_S3C2440=y
@@ -199,8 +199,8 @@
 #
 # Power management
 #
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
+# CONFIG_SAMSUNG_PM_DEBUG is not set
+# CONFIG_SAMSUNG_PM_CHECK is not set
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
 CONFIG_S3C_GPIO_SPACE=0
 
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
new file mode 100644
index 0000000..03f76cf
--- /dev/null
+++ b/arch/arm/configs/mmp2_defconfig
@@ -0,0 +1,1194 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc2
+# Tue Jan  5 13:55:22 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_MACH_TAVOREVB is not set
+
+#
+# Marvell PXA168/910/MMP2 Implmentations
+#
+# CONFIG_MACH_ASPENITE is not set
+# CONFIG_MACH_ZYLONITE2 is not set
+# CONFIG_MACH_TTC_DKB is not set
+CONFIG_MACH_FLINT=y
+CONFIG_CPU_MMP2=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M user_debug=255"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_DEVTMPFS is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_PXA3xx is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+CONFIG_MFD_88PM8607=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_MAX8660=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_REGULATOR_88PM8607=y
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 6afa2c1..da4710d 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -176,6 +176,7 @@
 #
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
+CONFIG_MACH_TERASTATION_WXL=y
 CONFIG_PLAT_ORION=y
 
 #
diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig
deleted file mode 100644
index 3cabbb6..0000000
--- a/arch/arm/configs/mx1ads_defconfig
+++ /dev/null
@@ -1,742 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 02:15:46 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-CONFIG_ARCH_IMX=y
-# CONFIG_ARCH_H720X is not set
-
-#
-# IMX Implementations
-#
-CONFIG_ARCH_MX1ADS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySMX0,57600n8 ip=bootp root=/dev/nfs"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index edfdd6f..b4c1366 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -200,7 +200,7 @@
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_PCM970_BASEBOARD=y
 CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_MX27LITE=y
+CONFIG_MACH_IMX27LITE=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
new file mode 100644
index 0000000..c88e952
--- /dev/null
+++ b/arch/arm/configs/mx51_defconfig
@@ -0,0 +1,1286 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc6
+# Tue Feb  2 15:20:48 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX25 is not set
+# CONFIG_ARCH_MX3 is not set
+# CONFIG_ARCH_MXC91231 is not set
+CONFIG_ARCH_MX5=y
+CONFIG_ARCH_MX51=y
+
+#
+# MX5 platforms:
+#
+CONFIG_MACH_MX51_BABBAGE=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_TZIC=y
+# CONFIG_MXC_PWM is not set
+CONFIG_ARCH_MXC_IOMUX_V3=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
+CONFIG_FIXED_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_GPIO=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=m
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_IMX is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_MXC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_MXC is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig
index 97300ec..51cc2a2 100644
--- a/arch/arm/configs/nuc950_defconfig
+++ b/arch/arm/configs/nuc950_defconfig
@@ -590,8 +590,40 @@
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_NUC900=y
+CONFIG_GPM1040A0_320X240=y
+CONFIG_FB_NUC900_DEBUG=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+
 
 #
 # Display device support
@@ -603,6 +635,25 @@
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 85b05d3..ee1ebd8 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Sat Nov  7 20:52:21 2009
+# Linux kernel version: 2.6.33-rc6
+# Thu Feb  4 23:30:00 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -32,6 +32,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -45,6 +51,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -122,14 +129,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -158,6 +192,7 @@
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -180,6 +215,7 @@
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 
 #
 # Orion Implementations
@@ -192,6 +228,7 @@
 CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_MINI=y
+CONFIG_MACH_LINKSTATION_LS_HGL=y
 CONFIG_MACH_TS409=y
 CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
@@ -268,12 +305,10 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
@@ -412,10 +447,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
 
 #
@@ -554,6 +585,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -562,6 +597,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -569,6 +605,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -621,7 +658,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -657,6 +696,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -711,15 +751,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -736,7 +777,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -842,8 +883,10 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -866,6 +909,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -875,6 +919,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -993,11 +1038,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1006,7 +1046,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1033,10 +1072,12 @@
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1079,6 +1120,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1104,6 +1146,7 @@
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1118,6 +1161,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -1140,11 +1184,13 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1316,6 +1362,7 @@
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
 # CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
@@ -1332,6 +1379,7 @@
 # CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -1377,6 +1425,7 @@
 # CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1398,7 +1447,9 @@
 CONFIG_RTC_DRV_M48T86=y
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1686,7 +1737,9 @@
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -1694,7 +1747,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 791b8c3..113511f 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Mar 20 13:43:13 2009
+# Linux kernel version: 2.6.33-rc3
+# Tue Jan 12 08:57:10 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -35,6 +32,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -46,11 +49,13 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -64,10 +69,10 @@
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -78,17 +83,20 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -98,6 +106,11 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -109,8 +122,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -118,31 +130,62 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -150,26 +193,30 @@
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 # CONFIG_MACH_TAVOREVB is not set
 
 #
@@ -177,6 +224,7 @@
 #
 CONFIG_MACH_ASPENITE=y
 CONFIG_MACH_ZYLONITE2=y
+CONFIG_MACH_AVENGERS_LITE=y
 # CONFIG_MACH_TTC_DKB is not set
 CONFIG_CPU_PXA168=y
 CONFIG_PLAT_PXA=y
@@ -187,7 +235,7 @@
 CONFIG_CPU_MOHAWK=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -201,7 +249,7 @@
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_COMMON_CLKDEV=y
 
@@ -223,13 +271,15 @@
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -237,12 +287,14 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -288,7 +340,6 @@
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +381,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -343,6 +395,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -355,13 +409,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -374,6 +428,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
@@ -412,8 +467,10 @@
 # CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -422,15 +479,12 @@
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -442,6 +496,7 @@
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -449,6 +504,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -510,6 +566,11 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -530,11 +591,14 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -555,22 +619,8 @@
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -595,13 +645,17 @@
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -613,10 +667,13 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -627,6 +684,11 @@
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -673,6 +735,7 @@
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -681,7 +744,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -706,6 +768,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -714,11 +777,15 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -738,28 +805,33 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -768,7 +840,9 @@
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -776,13 +850,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -791,10 +868,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -822,11 +901,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -863,6 +944,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -870,6 +952,7 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -884,7 +967,7 @@
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
new file mode 100644
index 0000000..acb1a8f
--- /dev/null
+++ b/arch/arm/configs/raumfeld_defconfig
@@ -0,0 +1,1898 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc5
+# Sun Nov  1 21:57:32 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+# CONFIG_CPU_PXA310 is not set
+CONFIG_CPU_PXA320=y
+# CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
+# CONFIG_CPU_PXA950 is not set
+
+#
+# Intel/Marvell Dev Platforms (sorted by hardware release time)
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+
+#
+# Third Party Dev Platforms (sorted by vendor name)
+#
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_MACH_BALLOON3 is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_MACH_XCEP is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+
+#
+# End-user Products (sorted by vendor name)
+#
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_PXA_EZX is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_PALM is not set
+CONFIG_MACH_RAUMFELD_RC=y
+CONFIG_MACH_RAUMFELD_CONNECTOR=y
+CONFIG_MACH_RAUMFELD_PROTO=y
+CONFIG_MACH_RAUMFELD_SPEAKER=y
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="console=ttyS0,115200 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+CONFIG_CFG80211_REG_DEBUG=y
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_ISL29003=y
+CONFIG_TI_DAC7512=y
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+CONFIG_USB_NET_MCS7830=y
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_EETI=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+# CONFIG_SPI_PXA2XX is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=m
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+CONFIG_W1_SLAVE_DS2760=m
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=y
+# CONFIG_APM_POWER is not set
+CONFIG_BATTERY_DS2760=m
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_SENSORS_LIS3_SPI=y
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_MAX8660=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+CONFIG_PXA3XX_GCU=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_RAUMFELD_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_LIB=y
+# CONFIG_SND_PXA2XX_AC97 is not set
+CONFIG_SND_SPI=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA_SOC_SSP=y
+CONFIG_SND_SOC_RAUMFELD=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AK4104=y
+CONFIG_SND_SOC_CS4270=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_LT3593=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+CONFIG_RTC_DRV_PXA=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+CONFIG_CACHEFILES=y
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_FSCACHE=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2f10dae..8e94c3c 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -187,7 +187,7 @@
 CONFIG_PM_SIMTEC=y
 CONFIG_S3C2410_DMA=y
 # CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_S3C24XX_ADC=y
+CONFIG_S3C_ADC=y
 CONFIG_MACH_SMDK=y
 CONFIG_PLAT_S3C=y
 CONFIG_CPU_LLSERIAL_S3C2410=y
@@ -203,8 +203,8 @@
 #
 # Power management
 #
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
+# CONFIG_SAMSUNG_PM_DEBUG is not set
+# CONFIG_SAMSUNG_PM_CHECK is not set
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
 CONFIG_S3C_GPIO_SPACE=0
 CONFIG_S3C_DEV_HSMMC=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index f56e50f..5e7d4c1 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,14 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Mon Nov  3 10:10:30 2008
+# Linux kernel version: 2.6.33-rc4
+# Tue Jan 19 13:12:40 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -18,13 +15,13 @@
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -34,13 +31,30 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -50,8 +64,13 @@
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -62,32 +81,38 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -95,11 +120,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -107,33 +129,62 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -141,35 +192,62 @@
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 CONFIG_ARCH_S3C64XX=y
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+# CONFIG_S3C_ADC is not set
+CONFIG_S3C_DEV_HSMMC=y
+CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_I2C1=y
+CONFIG_S3C_DEV_FB=y
+CONFIG_S3C_DEV_USB_HOST=y
+CONFIG_S3C_DEV_USB_HSOTG=y
+CONFIG_S3C_DEV_NAND=y
 CONFIG_PLAT_S3C64XX=y
 CONFIG_CPU_S3C6400_INIT=y
 CONFIG_CPU_S3C6400_CLOCK=y
+# CONFIG_S3C64XX_DMA is not set
 CONFIG_S3C64XX_SETUP_I2C0=y
 CONFIG_S3C64XX_SETUP_I2C1=y
+CONFIG_S3C64XX_SETUP_FB_24BPP=y
+CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y
 CONFIG_PLAT_S3C=y
 
 #
 # Boot options
 #
 CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 
 #
 # Power management
@@ -177,17 +255,16 @@
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
 CONFIG_S3C_GPIO_SPACE=0
 CONFIG_S3C_GPIO_TRACK=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_HSMMC1=y
-CONFIG_S3C_DEV_I2C1=y
+# CONFIG_MACH_SMDK6400 is not set
 CONFIG_CPU_S3C6410=y
 CONFIG_S3C6410_SETUP_SDHCI=y
+# CONFIG_MACH_ANW6410 is not set
 CONFIG_MACH_SMDK6410=y
 CONFIG_SMDK6410_SD_CH0=y
 # CONFIG_SMDK6410_SD_CH1 is not set
+# CONFIG_SMDK6410_WM1190_EV1 is not set
+# CONFIG_MACH_NCP is not set
+# CONFIG_MACH_HMT is not set
 
 #
 # Processor Type
@@ -196,7 +273,7 @@
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
 CONFIG_CPU_CACHE_V6=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
@@ -212,8 +289,10 @@
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
 
 #
 # Bus support
@@ -229,13 +308,15 @@
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -243,26 +324,28 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x51000000,4M"
+CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
 #
 # CPU Power Management
 #
+# CONFIG_CPU_FREQ is not set
 # CONFIG_CPU_IDLE is not set
 
 #
@@ -300,6 +383,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -314,14 +398,32 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -334,6 +436,7 @@
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -341,6 +444,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -357,27 +461,33 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -390,6 +500,7 @@
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -423,16 +534,18 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -443,6 +556,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
@@ -463,32 +577,33 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -497,10 +612,19 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -509,17 +633,21 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -530,16 +658,24 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -549,15 +685,14 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -568,28 +703,22 @@
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -612,17 +741,15 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-CONFIG_HID_DEBUG=y
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
 #
 # Special HID drivers
 #
-# CONFIG_HID_COMPAT is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
@@ -631,9 +758,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
 CONFIG_MMC_UNSAFE_RESUME=y
@@ -650,22 +781,24 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
 CONFIG_MMC_SDHCI_S3C=y
+# CONFIG_MMC_SDHCI_S3C_DMA is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Voltage and Current regulators
+# TI VLYNQ
 #
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -674,6 +807,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
@@ -683,9 +817,12 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -696,6 +833,11 @@
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -719,10 +861,7 @@
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -731,12 +870,17 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -755,6 +899,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -763,12 +908,16 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_PI_LIST=y
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -787,34 +936,43 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=0
 
 #
@@ -823,13 +981,19 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -838,6 +1002,10 @@
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig
new file mode 100644
index 0000000..279a15e
--- /dev/null
+++ b/arch/arm/configs/s5p6440_defconfig
@@ -0,0 +1,969 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc2
+# Sat Jan  9 16:33:55 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5P6440=y
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5P6440_INIT=y
+CONFIG_CPU_S5P6440_CLOCK=y
+CONFIG_CPU_S5P6440=y
+CONFIG_MACH_SMDK6440=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=200
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5P6440=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig
new file mode 100644
index 0000000..74e20bf
--- /dev/null
+++ b/arch/arm/configs/s5p6442_defconfig
@@ -0,0 +1,883 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc4
+# Mon Jan 25 08:50:28 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+CONFIG_ARCH_S5P6442=y
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+# CONFIG_S3C_ADC is not set
+
+#
+# Power management
+#
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5P6442=y
+CONFIG_MACH_SMDK6442=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=200
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5PV210=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig
new file mode 100644
index 0000000..6ea6361
--- /dev/null
+++ b/arch/arm/configs/s5pc110_defconfig
@@ -0,0 +1,894 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc4
+# Wed Feb 24 15:36:54 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+CONFIG_ARCH_S5PV210=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+# CONFIG_S3C_ADC is not set
+
+#
+# Power management
+#
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5PV210=y
+# CONFIG_MACH_SMDKV210 is not set
+CONFIG_MACH_SMDKC110=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_VMSPLIT_3G is not set
+CONFIG_VMSPLIT_2G=y
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0x80000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=200
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5PV210=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
new file mode 100644
index 0000000..3f7d474
--- /dev/null
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -0,0 +1,894 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc4
+# Wed Feb 24 15:36:16 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+CONFIG_ARCH_S5PV210=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+# CONFIG_S3C_ADC is not set
+
+#
+# Power management
+#
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5PV210=y
+CONFIG_MACH_SMDKV210=y
+# CONFIG_MACH_SMDKC110 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_VMSPLIT_3G is not set
+CONFIG_VMSPLIT_2G=y
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0x80000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=200
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5PV210=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 256ee1c..69ce072 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -128,6 +128,14 @@
 
 static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 {
+#ifdef CONFIG_DMABOUNCE
+	if (dev->archdata.dmabounce) {
+		if (dma_mask >= ISA_DMA_THRESHOLD)
+			return 0;
+		else
+			return -EIO;
+	}
+#endif
 	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
 		return -EIO;
 
diff --git a/arch/arm/include/asm/entry-macro-vic2.S b/arch/arm/include/asm/entry-macro-vic2.S
new file mode 100644
index 0000000..3ceb85e
--- /dev/null
+++ b/arch/arm/include/asm/entry-macro-vic2.S
@@ -0,0 +1,57 @@
+/* arch/arm/include/asm/entry-macro-vic2.S
+ *
+ * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Low-level IRQ helper macros for a device with two VICs
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/* This should be included from <mach/entry-macro.S> with the necessary
+ * defines for virtual addresses and IRQ bases for the two vics.
+ *
+ * The code needs the following defined:
+ *	IRQ_VIC0_BASE	IRQ number of VIC0's first IRQ
+ *	IRQ_VIC1_BASE	IRQ number of VIC1's first IRQ
+ *	VA_VIC0		Virtual address of VIC0
+ *	VA_VIC1		Virtual address of VIC1
+ *
+ * Note, code assumes VIC0's virtual address is an ARM immediate constant
+ * away from VIC1.
+*/
+
+#include <asm/hardware/vic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, #IRQ_VIC0_BASE + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE)
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index 74b5fff..6700c7f 100644
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -75,6 +75,18 @@
   IT8152_PD_IRQ(1)  USB (USBR)
   IT8152_PD_IRQ(0)  Audio controller (ACR)
  */
+#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT     9
+#define IT8152_LP_IRQ_COUNT     16
+#define IT8152_PD_IRQ_COUNT     15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
 /* frequently used interrupts */
 #define IT8152_PCISERR		IT8152_PD_IRQ(14)
 #define IT8152_H2PTADR		IT8152_PD_IRQ(13)
diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h
index 954b1be..74e51d6b 100644
--- a/arch/arm/include/asm/hardware/locomo.h
+++ b/arch/arm/include/asm/hardware/locomo.h
@@ -214,4 +214,8 @@
 /* Frontlight control */
 void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
 
+struct locomo_platform_data {
+	int	irq_base;	/* IRQ base for cascaded on-chip IRQs */
+};
+
 #endif
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 5da2595..92ed254 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -578,4 +578,8 @@
 void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
 void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
 
+struct sa1111_platform_data {
+	int	irq_base;	/* base for cascaded on-chip IRQs */
+};
+
 #endif  /* _ASM_ARCH_SA1111 */
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 226cddd..4798011 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -30,17 +30,6 @@
  */
 #define PCI_DMA_BUS_IS_PHYS     (1)
 
-/*
- * Whether pci_unmap_{single,page} is a nop depends upon the
- * configuration.
- */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index eec6e89..9dcb11e 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -128,6 +128,8 @@
 
 #ifdef __KERNEL__
 
+#define arch_has_single_step()	(1)
+
 #define user_mode(regs)	\
 	(((regs)->ARM_cpsr & 0xf) == 0)
 
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index cf9cdaa2..dd2bf53 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -443,9 +443,12 @@
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_SYS_OLD_MMAP
+#define __ARCH_WANT_SYS_OLD_SELECT
 
 #if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
 #define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_UTIME
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 9314a2d..37ae301 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -91,7 +91,7 @@
 		CALL(sys_settimeofday)
 /* 80 */	CALL(sys_getgroups16)
 		CALL(sys_setgroups16)
-		CALL(OBSOLETE(old_select))	/* used by libc4 */
+		CALL(OBSOLETE(sys_old_select))	/* used by libc4 */
 		CALL(sys_symlink)
 		CALL(sys_ni_syscall)		/* was sys_lstat */
 /* 85 */	CALL(sys_readlink)
@@ -99,7 +99,7 @@
 		CALL(sys_swapon)
 		CALL(sys_reboot)
 		CALL(OBSOLETE(sys_old_readdir))	/* used by libc4 */
-/* 90 */	CALL(OBSOLETE(old_mmap))	/* used by libc4 */
+/* 90 */	CALL(OBSOLETE(sys_old_mmap))	/* used by libc4 */
 		CALL(sys_munmap)
 		CALL(sys_truncate)
 		CALL(sys_ftruncate)
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index c54ceb3..3875d99 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -965,7 +965,7 @@
 	 */
 	armv6_pmcr_write(pmcr);
 
-	data.addr = 0;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 	for (idx = 0; idx <= armpmu->num_events; ++idx) {
@@ -1945,7 +1945,7 @@
 	 */
 	regs = get_irq_regs();
 
-	data.addr = 0;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 	for (idx = 0; idx <= armpmu->num_events; ++idx) {
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 08f899f..3f562a7 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -452,12 +452,23 @@
 		clear_breakpoint(child, &child->thread.debug.bp[i]);
 }
 
+void user_disable_single_step(struct task_struct *task)
+{
+	task->ptrace &= ~PT_SINGLESTEP;
+	ptrace_cancel_bpt(task);
+}
+
+void user_enable_single_step(struct task_struct *task)
+{
+	task->ptrace |= PT_SINGLESTEP;
+}
+
 /*
  * Called by kernel/ptrace.c when detaching..
  */
 void ptrace_disable(struct task_struct *child)
 {
-	single_step_disable(child);
+	user_disable_single_step(child);
 }
 
 /*
@@ -753,53 +764,6 @@
 			ret = ptrace_write_user(child, addr, data);
 			break;
 
-		/*
-		 * continue/restart and stop at next (return from) syscall
-		 */
-		case PTRACE_SYSCALL:
-		case PTRACE_CONT:
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			if (request == PTRACE_SYSCALL)
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			else
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			single_step_disable(child);
-			wake_up_process(child);
-			ret = 0;
-			break;
-
-		/*
-		 * make the child exit.  Best I can do is send it a sigkill.
-		 * perhaps it should be put in the status that it wants to
-		 * exit.
-		 */
-		case PTRACE_KILL:
-			single_step_disable(child);
-			if (child->exit_state != EXIT_ZOMBIE) {
-				child->exit_code = SIGKILL;
-				wake_up_process(child);
-			}
-			ret = 0;
-			break;
-
-		/*
-		 * execute single instruction.
-		 */
-		case PTRACE_SINGLESTEP:
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			single_step_enable(child);
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			/* give it a chance to run. */
-			wake_up_process(child);
-			ret = 0;
-			break;
-
 		case PTRACE_GETREGS:
 			ret = ptrace_getregs(child, (void __user *)data);
 			break;
diff --git a/arch/arm/kernel/ptrace.h b/arch/arm/kernel/ptrace.h
index def3b61..3926605 100644
--- a/arch/arm/kernel/ptrace.h
+++ b/arch/arm/kernel/ptrace.h
@@ -14,20 +14,6 @@
 extern void ptrace_break(struct task_struct *, struct pt_regs *);
 
 /*
- * make sure single-step breakpoint is gone.
- */
-static inline void single_step_disable(struct task_struct *task)
-{
-	task->ptrace &= ~PT_SINGLESTEP;
-	ptrace_cancel_bpt(task);
-}
-
-static inline void single_step_enable(struct task_struct *task)
-{
-	task->ptrace |= PT_SINGLESTEP;
-}
-
-/*
  * Send SIGTRAP if we're single-stepping
  */
 static inline void single_step_trap(struct task_struct *task)
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index ae4027b..4350f75 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -28,135 +28,6 @@
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
 
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
-{
-	int error = -EFAULT;
-	struct mmap_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls.
- */
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set __user *inp, *outp, *exp;
-	struct timeval __user *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc(uint call, int first, int second, int third,
-		       void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
-					(const struct timespec __user *)fifth);
-
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd(first, (struct msgbuf __user *) ptr, 
-				  second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-			if (copy_from_user(&tmp,(struct ipc_kludge __user *)ptr,
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv (first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl(first, second, (struct msqid_ds __user *)ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat(first, (char __user *)ptr, second, &raddr);
-			if (ret)
-				return ret;
-			return put_user(raddr, (ulong __user *)third);
-		}
-		case 1: /* Of course, we don't support iBCS2! */
-			return -EINVAL;
-		}
-	case SHMDT: 
-		return sys_shmdt ((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-#endif
-
 /* Fork a new task - this creates a new program thread.
  * This is called indirectly via a small wrapper
  */
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index d59a0cd..33ff678 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -346,9 +346,6 @@
 	return sys_oabi_semtimedop(semid, tsops, nsops, NULL);
 }
 
-extern asmlinkage int sys_ipc(uint call, int first, int second, int third,
-			      void __user *ptr, long fifth);
-
 asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third,
 			    void __user *ptr, long fifth)
 {
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 786ac2b..50292cd 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -359,7 +359,9 @@
 		frame.fp = regs->ARM_fp;
 		frame.sp = regs->ARM_sp;
 		frame.lr = regs->ARM_lr;
-		frame.pc = regs->ARM_pc;
+		/* PC might be corrupted, use LR in that case. */
+		frame.pc = kernel_text_address(regs->ARM_pc)
+			 ? regs->ARM_pc : regs->ARM_lr;
 	} else if (tsk == current) {
 		frame.fp = (unsigned long)__builtin_frame_address(0);
 		frame.sp = current_sp;
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 309f351..2500f41 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -58,6 +58,12 @@
 {
 	u32	sr = at91_sys_read(AT91_ST_SR) & irqmask;
 
+	/*
+	 * irqs should be disabled here, but as the irq is shared they are only
+	 * guaranteed to be off if the timer irq is registered first.
+	 */
+	WARN_ON_ONCE(!irqs_disabled());
+
 	/* simulate "oneshot" timer with alarm */
 	if (sr & AT91_ST_ALMS) {
 		clkevt.event_handler(&clkevt);
@@ -132,24 +138,11 @@
 static int
 clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 {
-	unsigned long	flags;
 	u32		alm;
 	int		status = 0;
 
 	BUG_ON(delta < 2);
 
-	/* Use "raw" primitives so we behave correctly on RT kernels. */
-	raw_local_irq_save(flags);
-
-	/*
-	 * According to Thomas Gleixner irqs are already disabled here.  Simply
-	 * removing raw_local_irq_save above (and the matching
-	 * raw_local_irq_restore) was not accepted.  See
-	 * http://thread.gmane.org/gmane.linux.ports.arm.kernel/41174
-	 * So for now (2008-11-20) just warn once if irqs were not disabled ...
-	 */
-	WARN_ON_ONCE(!raw_irqs_disabled_flags(flags));
-
 	/* The alarm IRQ uses absolute time (now+delta), not the relative
 	 * time (delta) in our calling convention.  Like all clockevents
 	 * using such "match" hardware, we have a race to defend against.
@@ -169,7 +162,6 @@
 	alm += delta;
 	at91_sys_write(AT91_ST_RTAR, alm);
 
-	raw_local_irq_restore(flags);
 	return status;
 }
 
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 4bd56ae..608a632 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -62,16 +62,12 @@
 static void
 pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 {
-	unsigned long	flags;
-
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		/* update clocksource counter, then enable the IRQ */
-		raw_local_irq_save(flags);
+		/* update clocksource counter */
 		pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
 		at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
 				| AT91_PIT_PITIEN);
-		raw_local_irq_restore(flags);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		BUG();
@@ -100,6 +96,11 @@
  */
 static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 {
+	/*
+	 * irqs should be disabled here, but as the irq is shared they are only
+	 * guaranteed to be off if the timer irq is registered first.
+	 */
+	WARN_ON_ONCE(!irqs_disabled());
 
 	/* The PIT interrupt may be disabled, and is shared */
 	if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
index 550d503..57f8ee1 100644
--- a/arch/arm/mach-at91/include/mach/at91_mci.h
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -77,7 +77,7 @@
 
 #define AT91_MCI_BLKR		0x18		/* Block Register */
 #define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
-#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block lenght */
+#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block length */
 
 #define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
 #define AT91_MCR_RDR		0x30		/* Receive Data Register */
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
index 39fdcea..2312d19 100644
--- a/arch/arm/mach-davinci/include/mach/i2c.h
+++ b/arch/arm/mach-davinci/include/mach/i2c.h
@@ -1,5 +1,5 @@
 /*
- * DaVinci I2C controller platfrom_device info
+ * DaVinci I2C controller platform_device info
  *
  * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
  *
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 806972a..5da2cf4 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -605,7 +605,7 @@
 	.dev		= {
 		.dma_mask		= &dove_xor0_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&dove_xor00_data,
+		.platform_data		= &dove_xor00_data,
 	},
 };
 
@@ -631,7 +631,7 @@
 	.dev		= {
 		.dma_mask		= &dove_xor0_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&dove_xor01_data,
+		.platform_data		= &dove_xor01_data,
 	},
 };
 
@@ -704,7 +704,7 @@
 	.dev		= {
 		.dma_mask		= &dove_xor1_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&dove_xor10_data,
+		.platform_data		= &dove_xor10_data,
 	},
 };
 
@@ -730,7 +730,7 @@
 	.dev		= {
 		.dma_mask		= &dove_xor1_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&dove_xor11_data,
+		.platform_data		= &dove_xor11_data,
 	},
 };
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 3bd934e..93107d8 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -65,6 +65,8 @@
 #define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
 #define TS72XX_RTC_DATA_SIZE		0x00001000
 
+#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
+#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index f3757a1..c33360e8 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -28,7 +28,7 @@
  *
  * Micro9-High has up to 64MB of 32-bit flash on CS1
  * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
- * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Lite uses a separate MTD map driver for flash support
  * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
  *************************************************************************/
 static struct physmap_flash_data micro9_flash_data;
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 259f782..fac1ec7 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -166,6 +166,26 @@
 	.num_resources	= 0,
 };
 
+static struct resource ts72xx_wdt_resources[] = {
+	{
+		.start	= TS72XX_WDT_CONTROL_PHYS_BASE,
+		.end	= TS72XX_WDT_CONTROL_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= TS72XX_WDT_FEED_PHYS_BASE,
+		.end	= TS72XX_WDT_FEED_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ts72xx_wdt_device = {
+	.name		= "ts72xx-wdt",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(ts72xx_wdt_resources),
+	.resource	= ts72xx_wdt_resources,
+};
+
 static struct ep93xx_eth_data ts72xx_eth_data = {
 	.phy_id		= 1,
 };
@@ -175,6 +195,7 @@
 	ep93xx_init_devices();
 	ts72xx_register_flash();
 	platform_device_register(&ts72xx_rtc_device);
+	platform_device_register(&ts72xx_wdt_device);
 
 	ep93xx_register_eth(&ts72xx_eth_data, 1);
 }
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index c4a0159..e3181534 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -502,32 +502,6 @@
 	return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
 }
 
-/*
- * We override these so we properly do dmabounce otherwise drivers
- * are able to set the dma_mask to 0xffffffff and we can no longer
- * trap bounces. :(
- *
- * We just return true on everyhing except for < 64MB in which case 
- * we will fail miseralby and die since we can't handle that case.
- */
-int
-pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (mask >= SZ_64M - 1 )
-		return 0;
-
-	return -EIO;
-}
-    
-int
-pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (mask >= SZ_64M - 1 )
-		return 0;
-
-	return -EIO;
-}
-
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
index f9d1c43..f91ca6d 100644
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -26,11 +26,6 @@
 #define PCIBIOS_MAX_MEM		0x4BFFFFFF
 #endif
 
-/*
- * We override the standard dma-mask routines for bouncing.
- */
-#define	HAVE_ARCH_PCI_SET_DMA_MASK
-
 #define pcibios_assign_all_busses()	1
 
 /* Register locations and bits */
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index f6c6196..17879a8 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -32,6 +32,12 @@
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell SheevaPlug Reference Board.
 
+config MACH_ESATA_SHEEVAPLUG
+	bool "Marvell eSATA SheevaPlug Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell eSATA SheevaPlug Reference Board.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
 	help
@@ -46,18 +52,35 @@
 	  QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
 	  devices.
 
+config MACH_OPENRD
+        bool
+
 config MACH_OPENRD_BASE
 	bool "Marvell OpenRD Base Board"
+	select MACH_OPENRD
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell OpenRD Base Board.
 
+config MACH_OPENRD_CLIENT
+	bool "Marvell OpenRD Client Board"
+	select MACH_OPENRD
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Client Board.
+
 config MACH_NETSPACE_V2
 	bool "LaCie Network Space v2 NAS Board"
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Network Space v2 NAS.
 
+config MACH_INETSPACE_V2
+	bool "LaCie Internet Space v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Internet Space v2 NAS.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index d4d7f53..a5530e3 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -5,9 +5,11 @@
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
+obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
-obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
+obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
 obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o
+obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 242dd07..f759ca2 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -656,7 +656,7 @@
 	.dev		= {
 		.dma_mask		= &kirkwood_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&kirkwood_xor00_data,
+		.platform_data		= &kirkwood_xor00_data,
 	},
 };
 
@@ -682,7 +682,7 @@
 	.dev		= {
 		.dma_mask		= &kirkwood_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&kirkwood_xor01_data,
+		.platform_data		= &kirkwood_xor01_data,
 	},
 };
 
@@ -755,7 +755,7 @@
 	.dev		= {
 		.dma_mask		= &kirkwood_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&kirkwood_xor10_data,
+		.platform_data		= &kirkwood_xor10_data,
 	},
 };
 
@@ -781,7 +781,7 @@
 	.dev		= {
 		.dma_mask		= &kirkwood_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&kirkwood_xor11_data,
+		.platform_data		= &kirkwood_xor11_data,
 	},
 };
 
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 9a06406..3ae158d 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -182,8 +182,14 @@
 
 static struct gpio_led netspace_v2_gpio_led_pins[] = {
 	{
-		.name	= "ns_v2:red:fail",
-		.gpio	= NETSPACE_V2_GPIO_RED_LED,
+		.name			= "ns_v2:blue:sata",
+		.default_trigger	= "default-on",
+		.gpio			= NETSPACE_V2_GPIO_BLUE_LED_CMD,
+		.active_low		= 1,
+	},
+	{
+		.name			= "ns_v2:red:fail",
+		.gpio			= NETSPACE_V2_GPIO_RED_LED,
 	},
 };
 
@@ -202,30 +208,19 @@
 
 static void __init netspace_v2_gpio_leds_init(void)
 {
+	int err;
+
+	/* Configure register slow_led to allow SATA activity LED blinking */
+	err = gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, "blue LED slow");
+	if (err == 0) {
+		err = gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0);
+		if (err)
+			gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
+	}
+	if (err)
+		pr_err("netspace_v2: failed to configure blue LED slow GPIO\n");
+
 	platform_device_register(&netspace_v2_gpio_leds);
-
-	/*
-	 * Configure the front blue LED to blink in relation with the SATA
-	 * activity.
-	 */
-	if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW,
-			 "SATA blue LED slow") != 0)
-		return;
-	if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0)
-		goto err_free_1;
-	if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD,
-			 "SATA blue LED command") != 0)
-		goto err_free_1;
-	if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0)
-		goto err_free_2;
-
-	return;
-
-err_free_2:
-	gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD);
-err_free_1:
-	gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
-	pr_err("netspace_v2: failed to configure SATA blue LED\n");
 }
 
 /*****************************************************************************
@@ -314,6 +309,7 @@
 		pr_err("netspace_v2: failed to configure power-off GPIO\n");
 }
 
+#ifdef CONFIG_MACH_NETSPACE_V2
 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
 	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
 	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
@@ -323,3 +319,16 @@
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &netspace_v2_timer,
 MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_INETSPACE_V2
+MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= netspace_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &netspace_v2_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
new file mode 100644
index 0000000..ad3f1ec
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-kirkwood/openrd-setup.c
+ *
+ * Marvell OpenRD (Base|Client) Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_nand_parts[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "uImage",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= SZ_4M
+	}, {
+		.name		= "root",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data openrd_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data openrd_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(24),
+};
+
+static struct mv_sata_platform_data openrd_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct mvsdio_platform_data openrd_mvsdio_data = {
+	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_mpp_config[] __initdata = {
+	MPP29_GPIO,
+	0
+};
+
+static void __init openrd_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(openrd_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&openrd_ge00_data);
+	if (machine_is_openrd_client())
+		kirkwood_ge01_init(&openrd_ge01_data);
+	kirkwood_sata_init(&openrd_sata_data);
+	kirkwood_sdio_init(&openrd_mvsdio_data);
+
+	kirkwood_i2c_init();
+}
+
+static int __init openrd_pci_init(void)
+{
+	if (machine_is_openrd_base() || machine_is_openrd_client())
+		kirkwood_pcie_init();
+
+	return 0;
+}
+subsys_initcall(openrd_pci_init);
+
+#ifdef CONFIG_MACH_OPENRD_BASE
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_OPENRD_CLIENT
+MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
deleted file mode 100644
index 77617c7..0000000
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/openrd_base-setup.c
- *
- * Marvell OpenRD Base Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition openrd_base_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data openrd_base_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct mvsdio_platform_data openrd_base_mvsdio_data = {
-	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
-};
-
-static unsigned int openrd_base_mpp_config[] __initdata = {
-	MPP29_GPIO,
-	0
-};
-
-static void __init openrd_base_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(openrd_base_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
-
-	kirkwood_ehci_init();
-
-	kirkwood_ge00_init(&openrd_base_ge00_data);
-	kirkwood_sata_init(&openrd_base_sata_data);
-	kirkwood_sdio_init(&openrd_base_mvsdio_data);
-
-	kirkwood_i2c_init();
-}
-
-static int __init openrd_base_pci_init(void)
-{
-	if (machine_is_openrd_base())
-		kirkwood_pcie_init();
-
-	return 0;
- }
-subsys_initcall(openrd_base_pci_init);
-
-
-MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
-	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
-	.init_machine	= openrd_base_init,
-	.map_io		= kirkwood_map_io,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index c7319ee..a00879d 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/ata_platform.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
@@ -42,10 +43,19 @@
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
+static struct mv_sata_platform_data sheeva_esata_sata_data = {
+	.n_ports	= 2,
+};
+
 static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
 	/* unfortunately the CD signal has not been connected */
 };
 
+static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
+	.gpio_write_protect = 44, /* MPP44 used as SD write protect */
+	.gpio_card_detect = 47,	  /* MPP47 used as SD card detect */
+};
+
 static struct gpio_led sheevaplug_led_pins[] = {
 	{
 		.name			= "plug:green:health",
@@ -74,13 +84,26 @@
 	0
 };
 
+static unsigned int sheeva_esata_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP44_GPIO,	/* SD Write Protect */
+	MPP47_GPIO,	/* SD Card Detect */
+	MPP49_GPIO,	/* LED Green */
+	0
+};
+
 static void __init sheevaplug_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
 	kirkwood_init();
-	kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+	/* setup gpio pin select */
+	if (machine_is_sheeva_esata())
+		kirkwood_mpp_conf(sheeva_esata_mpp_config);
+	else
+		kirkwood_mpp_conf(sheevaplug_mpp_config);
 
 	kirkwood_uart0_init();
 	kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
@@ -91,11 +114,21 @@
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&sheevaplug_ge00_data);
-	kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+	/* honor lower power consumption for plugs with out eSATA */
+	if (machine_is_sheeva_esata())
+		kirkwood_sata_init(&sheeva_esata_sata_data);
+
+	/* enable sd wp and sd cd on plugs with esata */
+	if (machine_is_sheeva_esata())
+		kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
+	else
+		kirkwood_sdio_init(&sheevaplug_mvsdio_data);
 
 	platform_device_register(&sheevaplug_leds);
 }
 
+#ifdef CONFIG_MACH_SHEEVAPLUG
 MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
 	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
 	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
@@ -106,3 +139,16 @@
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
+MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= sheevaplug_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index c6a564fc..6ab843e 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_MMP
 
-menu "Marvell PXA168/910 Implmentations"
+menu "Marvell PXA168/910/MMP2 Implmentations"
 
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
@@ -16,6 +16,13 @@
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  Zylonite2 Development Board.
 
+config MACH_AVENGERS_LITE
+	bool "Marvell's PXA168 Avengers Lite Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Avengers Lite Development Board.
+
 config MACH_TAVOREVB
 	bool "Marvell's PXA910 TavorEVB Development Board"
 	select CPU_PXA910
@@ -30,6 +37,26 @@
 	  Say 'Y' here if you want to support the Marvell PXA910-based
 	  TTC_DKB Development Board.
 
+config MACH_FLINT
+	bool "Marvell's Flint Development Platform"
+	select CPU_MMP2
+	help
+	  Say 'Y' here if you want to support the Marvell MMP2-based
+	  Flint Development Platform.
+	  MMP2-based board can't be co-existed with PXA168-based &
+	  PXA910-based development board. Since MMP2 is compatible to
+	  ARMv6 architecture.
+
+config MACH_MARVELL_JASPER
+	bool "Marvell's Jasper Development Platform"
+	select CPU_MMP2
+	help
+	  Say 'Y' here if you want to support the Marvell MMP2-base
+	  Jasper Development Platform.
+	  MMP2-based board can't be co-existed with PXA168-based &
+	  PXA910-based development board. Since MMP2 is compatible to
+	  ARMv6 architecture.
+
 endmenu
 
 config CPU_PXA168
@@ -44,4 +71,10 @@
 	help
 	  Select code specific to PXA910
 
+config CPU_MMP2
+	bool
+	select CPU_V6
+	select CPU_32v6K
+	help
+	  Select code specific to MMP2. MMP2 is ARMv6 compatible.
 endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 6883e65..8b66d06 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,14 +2,18 @@
 # Makefile for Marvell's PXA168 processors line
 #
 
-obj-y				+= common.o clock.o devices.o irq.o time.o
+obj-y				+= common.o clock.o devices.o time.o
 
 # SoC support
-obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
-obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
+obj-$(CONFIG_CPU_PXA168)	+= pxa168.o irq-pxa168.o
+obj-$(CONFIG_CPU_PXA910)	+= pxa910.o irq-pxa168.o
+obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o
 
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
 obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
+obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
+obj-$(CONFIG_MACH_FLINT)	+= flint.o
+obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
new file mode 100644
index 0000000..8c3fa5d1
--- /dev/null
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -0,0 +1,51 @@
+/*
+ *  linux/arch/arm/mach-mmp/avengers_lite.c
+ *
+ *  Support for the Marvell PXA168-based Avengers lite Development Platform.
+ *
+ *  Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/irqs.h>
+
+
+#include "common.h"
+#include <linux/delay.h>
+
+/* Avengers lite MFP configurations */
+static unsigned long avengers_lite_pin_config_V16F[] __initdata = {
+	/* DEBUG_UART */
+	GPIO88_UART2_TXD,
+	GPIO89_UART2_RXD,
+};
+
+static void __init avengers_lite_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F));
+
+	/* on-chip devices */
+	pxa168_add_uart(2);
+}
+
+MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = avengers_lite_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index c33fbbc..b4a0ba0 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -3,11 +3,15 @@
 struct sys_timer;
 
 extern void timer_init(int irq);
+extern void mmp2_clear_pmic_int(void);
 
 extern struct sys_timer pxa168_timer;
 extern struct sys_timer pxa910_timer;
+extern struct sys_timer mmp2_timer;
 extern void __init pxa168_init_irq(void);
 extern void __init pxa910_init_irq(void);
+extern void __init mmp2_init_icu(void);
+extern void __init mmp2_init_irq(void);
 
 extern void __init icu_init_irq(void);
 extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
new file mode 100644
index 0000000..4ec7709
--- /dev/null
+++ b/arch/arm/mach-mmp/flint.c
@@ -0,0 +1,123 @@
+/*
+ *  linux/arch/arm/mach-mmp/flint.c
+ *
+ *  Support for the Marvell Flint Development Platform.
+ *
+ *  Copyright (C) 2009 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+
+#include "common.h"
+
+static unsigned long flint_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO45_UART1_RXD,
+	GPIO46_UART1_TXD,
+
+	/* UART2 */
+	GPIO47_UART2_RXD,
+	GPIO48_UART2_TXD,
+
+	/* SMC */
+	GPIO151_SMC_SCLK,
+	GPIO145_SMC_nCS0,
+	GPIO146_SMC_nCS1,
+	GPIO152_SMC_BE0,
+	GPIO153_SMC_BE1,
+	GPIO154_SMC_IRQ,
+	GPIO113_SMC_RDY,
+
+	/*Ethernet*/
+	GPIO155_GPIO155,
+
+	/* DFI */
+	GPIO168_DFI_D0,
+	GPIO167_DFI_D1,
+	GPIO166_DFI_D2,
+	GPIO165_DFI_D3,
+	GPIO107_DFI_D4,
+	GPIO106_DFI_D5,
+	GPIO105_DFI_D6,
+	GPIO104_DFI_D7,
+	GPIO111_DFI_D8,
+	GPIO164_DFI_D9,
+	GPIO163_DFI_D10,
+	GPIO162_DFI_D11,
+	GPIO161_DFI_D12,
+	GPIO110_DFI_D13,
+	GPIO109_DFI_D14,
+	GPIO108_DFI_D15,
+	GPIO143_ND_nCS0,
+	GPIO144_ND_nCS1,
+	GPIO147_ND_nWE,
+	GPIO148_ND_nRE,
+	GPIO150_ND_ALE,
+	GPIO149_ND_CLE,
+	GPIO112_ND_RDY0,
+	GPIO160_ND_RDY1,
+};
+
+static struct smc91x_platdata flint_smc91x_info = {
+	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start  = SMC_CS1_PHYS_BASE + 0x300,
+		.end    = SMC_CS1_PHYS_BASE + 0xfffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = gpio_to_irq(155),
+		.end    = gpio_to_irq(155),
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev            = {
+		.platform_data = &flint_smc91x_info,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_resources),
+	.resource       = smc91x_resources,
+};
+
+static void __init flint_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(flint_pin_config));
+
+	/* on-chip devices */
+	mmp2_add_uart(1);
+	mmp2_add_uart(2);
+
+	/* off-chip devices */
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(FLINT, "Flint Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = mmp2_init_irq,
+	.timer          = &mmp2_timer,
+	.init_machine   = flint_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
index 25e797b..83b1872 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -8,6 +8,7 @@
  *
  * PXA168    A0    0x41159263   0x56158400   0x00A0A333
  * PXA910    Y0    0x41159262   0x56158000   0x00F0C910
+ * MMP2	     Z0			0x560f5811
  */
 
 #ifdef CONFIG_CPU_PXA168
@@ -24,7 +25,15 @@
 #  define __cpu_is_pxa910(id)	(0)
 #endif
 
+#ifdef CONFIG_CPU_MMP2
+#  define __cpu_is_mmp2(id)	\
+	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x58; })
+#else
+#  define __cpu_is_mmp2(id)	(0)
+#endif
+
 #define cpu_is_pxa168()		({ __cpu_is_pxa168(read_cpuid_id()); })
 #define cpu_is_pxa910()		({ __cpu_is_pxa910(read_cpuid_id()); })
+#define cpu_is_mmp2()		({ __cpu_is_mmp2(read_cpuid_id()); })
 
 #endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
index 2458539..1fa0a49 100644
--- a/arch/arm/mach-mmp/include/mach/devices.h
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -34,4 +34,16 @@
 	.size		= _size,					\
 	.dma		= { _dma },					\
 };
+
+#define MMP2_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
+struct pxa_device_desc mmp2_device_##_name __initdata = {		\
+	.dev_name	= "mmp2-" #_name,				\
+	.drv_name	= _drv,						\
+	.id		= _id,						\
+	.irq		= IRQ_MMP2_##_irq,				\
+	.start		= _start,					\
+	.size		= _size,					\
+	.dma		= { _dma },					\
+}
+
 extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
index 6d3cd35..c42d9d4 100644
--- a/arch/arm/mach-mmp/include/mach/entry-macro.S
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -15,7 +15,12 @@
 	.endm
 
 	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =ICU_AP_IRQ_SEL_INT_NUM
+	mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
+	and	\tmp, \tmp, #0xff00
+	cmp	\tmp, #0x5800
+	ldr	\base, =ICU_VIRT_BASE
+	addne	\base, \base, #0x10c		@ PJ1 AP INT SEL register
+	addeq	\base, \base, #0x104		@ PJ4 IRQ SEL register
 	.endm
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index d68871b..0270119 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -113,10 +113,119 @@
 #define IRQ_PXA910_AP_PMU		60
 #define IRQ_PXA910_SM_INT		63	/* from PinMux */
 
-#define IRQ_GPIO_START			64
-#define IRQ_GPIO_NUM			128
+/*
+ * Interrupt numbers for MMP2
+ */
+#define IRQ_MMP2_NONE			(-1)
+#define IRQ_MMP2_SSP1			0
+#define IRQ_MMP2_SSP2			1
+#define IRQ_MMP2_SSPA1			2
+#define IRQ_MMP2_SSPA2			3
+#define IRQ_MMP2_PMIC_MUX		4	/* PMIC & Charger */
+#define IRQ_MMP2_RTC_MUX		5
+#define IRQ_MMP2_TWSI1			7
+#define IRQ_MMP2_GPU			8
+#define IRQ_MMP2_KEYPAD			9
+#define IRQ_MMP2_ROTARY			10
+#define IRQ_MMP2_TRACKBALL		11
+#define IRQ_MMP2_ONEWIRE		12
+#define IRQ_MMP2_TIMER1			13
+#define IRQ_MMP2_TIMER2			14
+#define IRQ_MMP2_TIMER3			15
+#define IRQ_MMP2_RIPC			16
+#define IRQ_MMP2_TWSI_MUX		17	/* TWSI2 ~ TWSI6 */
+#define IRQ_MMP2_HDMI			19
+#define IRQ_MMP2_SSP3			20
+#define IRQ_MMP2_SSP4			21
+#define IRQ_MMP2_USB_HS1		22
+#define IRQ_MMP2_USB_HS2		23
+#define IRQ_MMP2_UART3			24
+#define IRQ_MMP2_UART1			27
+#define IRQ_MMP2_UART2			28
+#define IRQ_MMP2_MIPI_DSI		29
+#define IRQ_MMP2_CI2			30
+#define IRQ_MMP2_PMU_TIMER1		31
+#define IRQ_MMP2_PMU_TIMER2		32
+#define IRQ_MMP2_PMU_TIMER3		33
+#define IRQ_MMP2_USB_FS			34
+#define IRQ_MMP2_MISC_MUX		35
+#define IRQ_MMP2_WDT1			36
+#define IRQ_MMP2_NAND_DMA		37
+#define IRQ_MMP2_USIM			38
+#define IRQ_MMP2_MMC			39
+#define IRQ_MMP2_WTM			40
+#define IRQ_MMP2_LCD			41
+#define IRQ_MMP2_CI			42
+#define IRQ_MMP2_IRE			43
+#define IRQ_MMP2_USB_OTG		44
+#define IRQ_MMP2_NAND			45
+#define IRQ_MMP2_UART4			46
+#define IRQ_MMP2_DMA_FIQ		47
+#define IRQ_MMP2_DMA_RIQ		48
+#define IRQ_MMP2_GPIO			49
+#define IRQ_MMP2_SSP_MUX		51
+#define IRQ_MMP2_MMC2			52
+#define IRQ_MMP2_MMC3			53
+#define IRQ_MMP2_MMC4			54
+#define IRQ_MMP2_MIPI_HSI		55
+#define IRQ_MMP2_MSP			58
+#define IRQ_MMP2_MIPI_SLIM_DMA		59
+#define IRQ_MMP2_PJ4_FREQ_CHG		60
+#define IRQ_MMP2_MIPI_SLIM		62
+#define IRQ_MMP2_SM			63
+
+#define IRQ_MMP2_MUX_BASE		64
+
+/* secondary interrupt of INT #4 */
+#define IRQ_MMP2_PMIC_BASE		(IRQ_MMP2_MUX_BASE)
+#define IRQ_MMP2_CHARGER		(IRQ_MMP2_PMIC_BASE + 0)
+#define IRQ_MMP2_PMIC			(IRQ_MMP2_PMIC_BASE + 1)
+
+/* secondary interrupt of INT #5 */
+#define IRQ_MMP2_RTC_BASE		(IRQ_MMP2_PMIC_BASE + 2)
+#define IRQ_MMP2_RTC_ALARM		(IRQ_MMP2_RTC_BASE + 0)
+#define IRQ_MMP2_RTC			(IRQ_MMP2_RTC_BASE + 1)
+
+/* secondary interrupt of INT #17 */
+#define IRQ_MMP2_TWSI_BASE		(IRQ_MMP2_RTC_BASE + 2)
+#define IRQ_MMP2_TWSI2			(IRQ_MMP2_TWSI_BASE + 0)
+#define IRQ_MMP2_TWSI3			(IRQ_MMP2_TWSI_BASE + 1)
+#define IRQ_MMP2_TWSI4			(IRQ_MMP2_TWSI_BASE + 2)
+#define IRQ_MMP2_TWSI5			(IRQ_MMP2_TWSI_BASE + 3)
+#define IRQ_MMP2_TWSI6			(IRQ_MMP2_TWSI_BASE + 4)
+
+/* secondary interrupt of INT #35 */
+#define IRQ_MMP2_MISC_BASE		(IRQ_MMP2_TWSI_BASE + 5)
+#define IRQ_MMP2_PERF			(IRQ_MMP2_MISC_BASE + 0)
+#define IRQ_MMP2_L2_PA_ECC		(IRQ_MMP2_MISC_BASE + 1)
+#define IRQ_MMP2_L2_ECC			(IRQ_MMP2_MISC_BASE + 2)
+#define IRQ_MMP2_L2_UECC		(IRQ_MMP2_MISC_BASE + 3)
+#define IRQ_MMP2_DDR			(IRQ_MMP2_MISC_BASE + 4)
+#define IRQ_MMP2_FAB0_TIMEOUT		(IRQ_MMP2_MISC_BASE + 5)
+#define IRQ_MMP2_FAB1_TIMEOUT		(IRQ_MMP2_MISC_BASE + 6)
+#define IRQ_MMP2_FAB2_TIMEOUT		(IRQ_MMP2_MISC_BASE + 7)
+#define IRQ_MMP2_THERMAL		(IRQ_MMP2_MISC_BASE + 9)
+#define IRQ_MMP2_MAIN_PMU		(IRQ_MMP2_MISC_BASE + 10)
+#define IRQ_MMP2_WDT2			(IRQ_MMP2_MISC_BASE + 11)
+#define IRQ_MMP2_CORESIGHT		(IRQ_MMP2_MISC_BASE + 12)
+#define IRQ_MMP2_COMMTX			(IRQ_MMP2_MISC_BASE + 13)
+#define IRQ_MMP2_COMMRX			(IRQ_MMP2_MISC_BASE + 14)
+
+/* secondary interrupt of INT #51 */
+#define IRQ_MMP2_SSP_BASE		(IRQ_MMP2_MISC_BASE + 15)
+#define IRQ_MMP2_SSP1_SRDY		(IRQ_MMP2_SSP_BASE + 0)
+#define IRQ_MMP2_SSP3_SRDY		(IRQ_MMP2_SSP_BASE + 1)
+
+#define IRQ_MMP2_MUX_END		(IRQ_MMP2_SSP_BASE + 2)
+
+#define IRQ_GPIO_START			128
+#define IRQ_GPIO_NUM			192
 #define IRQ_GPIO(x)			(IRQ_GPIO_START + (x))
 
-#define NR_IRQS		(IRQ_GPIO_START + IRQ_GPIO_NUM)
+/* Board IRQ - 64 by default, increase if not enough */
+#define IRQ_BOARD_START			(IRQ_GPIO_START + IRQ_GPIO_NUM)
+#define IRQ_BOARD_END			(IRQ_BOARD_START + 64)
+
+#define NR_IRQS				(IRQ_BOARD_END)
 
 #endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
new file mode 100644
index 0000000..9f9f814
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
@@ -0,0 +1,240 @@
+#ifndef __ASM_MACH_MFP_MMP2_H
+#define __ASM_MACH_MFP_MMP2_H
+
+#include <mach/mfp.h>
+
+#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
+#define MFP_DRIVE_SLOW		(0x2 << 13)
+#define MFP_DRIVE_MEDIUM	(0x4 << 13)
+#define MFP_DRIVE_FAST		(0x8 << 13)
+
+/* GPIO */
+
+/* DFI */
+#define GPIO108_DFI_D15		MFP_CFG(GPIO108, AF0)
+#define GPIO109_DFI_D14		MFP_CFG(GPIO109, AF0)
+#define GPIO110_DFI_D13		MFP_CFG(GPIO110, AF0)
+#define GPIO161_DFI_D12		MFP_CFG(GPIO161, AF0)
+#define GPIO162_DFI_D11		MFP_CFG(GPIO162, AF0)
+#define GPIO163_DFI_D10		MFP_CFG(GPIO163, AF0)
+#define GPIO164_DFI_D9		MFP_CFG(GPIO164, AF0)
+#define GPIO111_DFI_D8		MFP_CFG(GPIO111, AF0)
+#define GPIO104_DFI_D7		MFP_CFG(GPIO104, AF0)
+#define GPIO105_DFI_D6		MFP_CFG(GPIO105, AF0)
+#define GPIO106_DFI_D5		MFP_CFG(GPIO106, AF0)
+#define GPIO107_DFI_D4		MFP_CFG(GPIO107, AF0)
+#define GPIO165_DFI_D3		MFP_CFG(GPIO165, AF0)
+#define GPIO166_DFI_D2		MFP_CFG(GPIO166, AF0)
+#define GPIO167_DFI_D1		MFP_CFG(GPIO167, AF0)
+#define GPIO168_DFI_D0		MFP_CFG(GPIO168, AF0)
+#define GPIO143_ND_nCS0		MFP_CFG(GPIO143, AF0)
+#define GPIO144_ND_nCS1		MFP_CFG(GPIO144, AF0)
+#define GPIO147_ND_nWE		MFP_CFG(GPIO147, AF0)
+#define GPIO148_ND_nRE		MFP_CFG(GPIO148, AF0)
+#define GPIO150_ND_ALE		MFP_CFG(GPIO150, AF0)
+#define GPIO149_ND_CLE		MFP_CFG(GPIO149, AF0)
+#define GPIO112_ND_RDY0		MFP_CFG(GPIO112, AF0)
+#define GPIO160_ND_RDY1		MFP_CFG(GPIO160, AF0)
+
+/* Static Memory Controller */
+#define GPIO145_SMC_nCS0	MFP_CFG(GPIO145, AF0)
+#define GPIO146_SMC_nCS1	MFP_CFG(GPIO146, AF0)
+#define GPIO152_SMC_BE0		MFP_CFG(GPIO152, AF0)
+#define GPIO153_SMC_BE1		MFP_CFG(GPIO153, AF0)
+#define GPIO154_SMC_IRQ		MFP_CFG(GPIO154, AF0)
+#define GPIO113_SMC_RDY		MFP_CFG(GPIO113, AF0)
+#define GPIO151_SMC_SCLK	MFP_CFG(GPIO151, AF0)
+
+/* Ethernet */
+#define GPIO155_SM_ADVMUX	MFP_CFG(GPIO155, AF2)
+#define GPIO155_GPIO155		MFP_CFG(GPIO155, AF1)
+
+/* UART1 */
+#define GPIO45_UART1_RXD	MFP_CFG(GPIO45, AF1)
+#define GPIO46_UART1_TXD	MFP_CFG(GPIO46, AF1)
+#define GPIO29_UART1_RXD	MFP_CFG(GPIO29, AF1)
+#define GPIO30_UART1_TXD	MFP_CFG(GPIO30, AF1)
+#define GPIO31_UART1_CTS	MFP_CFG(GPIO31, AF1)
+#define GPIO32_UART1_RTS	MFP_CFG(GPIO32, AF1)
+
+/* UART2 */
+#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART2_CTS	MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART2_RTS	MFP_CFG(GPIO50, AF1)
+
+/* UART3 */
+#define GPIO51_UART3_RXD	MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART3_TXD	MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART3_CTS	MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART3_RTS	MFP_CFG(GPIO54, AF1)
+
+/* MMC1 */
+#define GPIO124_MMC1_DAT7	MFP_CFG_DRV(GPIO124, AF1, FAST)
+#define GPIO125_MMC1_DAT6	MFP_CFG_DRV(GPIO125, AF1, FAST)
+#define GPIO129_MMC1_DAT5	MFP_CFG_DRV(GPIO129, AF1, FAST)
+#define GPIO130_MMC1_DAT4	MFP_CFG_DRV(GPIO130, AF1, FAST)
+#define GPIO131_MMC1_DAT3	MFP_CFG_DRV(GPIO131, AF1, FAST)
+#define GPIO132_MMC1_DAT2	MFP_CFG_DRV(GPIO132, AF1, FAST)
+#define GPIO133_MMC1_DAT1	MFP_CFG_DRV(GPIO133, AF1, FAST)
+#define GPIO134_MMC1_DAT0	MFP_CFG_DRV(GPIO134, AF1, FAST)
+#define GPIO136_MMC1_CMD	MFP_CFG_DRV(GPIO136, AF1, FAST)
+#define GPIO139_MMC1_CLK	MFP_CFG_DRV(GPIO139, AF1, FAST)
+#define GPIO140_MMC1_CD		MFP_CFG_DRV(GPIO140, AF1, FAST)
+#define GPIO141_MMC1_WP		MFP_CFG_DRV(GPIO141, AF1, FAST)
+
+/*MMC2*/
+#define GPIO37_MMC2_DAT3	MFP_CFG_DRV(GPIO37, AF1, FAST)
+#define GPIO38_MMC2_DAT2	MFP_CFG_DRV(GPIO38, AF1, FAST)
+#define GPIO39_MMC2_DAT1	MFP_CFG_DRV(GPIO39, AF1, FAST)
+#define GPIO40_MMC2_DAT0	MFP_CFG_DRV(GPIO40, AF1, FAST)
+#define GPIO41_MMC2_CMD		MFP_CFG_DRV(GPIO41, AF1, FAST)
+#define GPIO42_MMC2_CLK		MFP_CFG_DRV(GPIO42, AF1, FAST)
+
+/*MMC3*/
+#define GPIO165_MMC3_DAT7	MFP_CFG_DRV(GPIO165, AF2, FAST)
+#define GPIO162_MMC3_DAT6	MFP_CFG_DRV(GPIO162, AF2, FAST)
+#define GPIO166_MMC3_DAT5	MFP_CFG_DRV(GPIO166, AF2, FAST)
+#define GPIO163_MMC3_DAT4	MFP_CFG_DRV(GPIO163, AF2, FAST)
+#define GPIO167_MMC3_DAT3	MFP_CFG_DRV(GPIO167, AF2, FAST)
+#define GPIO164_MMC3_DAT2	MFP_CFG_DRV(GPIO164, AF2, FAST)
+#define GPIO168_MMC3_DAT1	MFP_CFG_DRV(GPIO168, AF2, FAST)
+#define GPIO111_MMC3_DAT0	MFP_CFG_DRV(GPIO111, AF2, FAST)
+#define GPIO112_MMC3_CMD	MFP_CFG_DRV(GPIO112, AF2, FAST)
+#define GPIO151_MMC3_CLK	MFP_CFG_DRV(GPIO151, AF2, FAST)
+
+/* LCD */
+#define GPIO74_LCD_FCLK		MFP_CFG_DRV(GPIO74, AF1, FAST)
+#define GPIO75_LCD_LCLK		MFP_CFG_DRV(GPIO75, AF1, FAST)
+#define GPIO76_LCD_PCLK		MFP_CFG_DRV(GPIO76, AF1, FAST)
+#define GPIO77_LCD_DENA		MFP_CFG_DRV(GPIO77, AF1, FAST)
+#define GPIO78_LCD_DD0		MFP_CFG_DRV(GPIO78, AF1, FAST)
+#define GPIO79_LCD_DD1		MFP_CFG_DRV(GPIO79, AF1, FAST)
+#define GPIO80_LCD_DD2		MFP_CFG_DRV(GPIO80, AF1, FAST)
+#define GPIO81_LCD_DD3		MFP_CFG_DRV(GPIO81, AF1, FAST)
+#define GPIO82_LCD_DD4		MFP_CFG_DRV(GPIO82, AF1, FAST)
+#define GPIO83_LCD_DD5		MFP_CFG_DRV(GPIO83, AF1, FAST)
+#define GPIO84_LCD_DD6		MFP_CFG_DRV(GPIO84, AF1, FAST)
+#define GPIO85_LCD_DD7		MFP_CFG_DRV(GPIO85, AF1, FAST)
+#define GPIO86_LCD_DD8		MFP_CFG_DRV(GPIO86, AF1, FAST)
+#define GPIO87_LCD_DD9		MFP_CFG_DRV(GPIO87, AF1, FAST)
+#define GPIO88_LCD_DD10		MFP_CFG_DRV(GPIO88, AF1, FAST)
+#define GPIO89_LCD_DD11		MFP_CFG_DRV(GPIO89, AF1, FAST)
+#define GPIO90_LCD_DD12		MFP_CFG_DRV(GPIO90, AF1, FAST)
+#define GPIO91_LCD_DD13		MFP_CFG_DRV(GPIO91, AF1, FAST)
+#define GPIO92_LCD_DD14		MFP_CFG_DRV(GPIO92, AF1, FAST)
+#define GPIO93_LCD_DD15		MFP_CFG_DRV(GPIO93, AF1, FAST)
+#define GPIO94_LCD_DD16		MFP_CFG_DRV(GPIO94, AF1, FAST)
+#define GPIO95_LCD_DD17		MFP_CFG_DRV(GPIO95, AF1, FAST)
+#define GPIO96_LCD_DD18		MFP_CFG_DRV(GPIO96, AF1, FAST)
+#define GPIO97_LCD_DD19		MFP_CFG_DRV(GPIO97, AF1, FAST)
+#define GPIO98_LCD_DD20		MFP_CFG_DRV(GPIO98, AF1, FAST)
+#define GPIO99_LCD_DD21		MFP_CFG_DRV(GPIO99, AF1, FAST)
+#define GPIO100_LCD_DD22	MFP_CFG_DRV(GPIO100, AF1, FAST)
+#define GPIO101_LCD_DD23	MFP_CFG_DRV(GPIO101, AF1, FAST)
+#define GPIO94_SPI_DCLK		MFP_CFG_DRV(GPIO94, AF3, FAST)
+#define GPIO95_SPI_CS0		MFP_CFG_DRV(GPIO95, AF3, FAST)
+#define GPIO96_SPI_DIN		MFP_CFG_DRV(GPIO96, AF3, FAST)
+#define GPIO97_SPI_DOUT		MFP_CFG_DRV(GPIO97, AF3, FAST)
+#define GPIO98_LCD_RST		MFP_CFG_DRV(GPIO98, AF0, FAST)
+
+#define GPIO114_MN_CLK_OUT	MFP_CFG_DRV(GPIO114, AF1, FAST)
+
+/*LCD TV path*/
+#define GPIO124_LCD_DD24	MFP_CFG_DRV(GPIO124, AF2, FAST)
+#define GPIO125_LCD_DD25	MFP_CFG_DRV(GPIO125, AF2, FAST)
+#define GPIO126_LCD_DD33	MFP_CFG_DRV(GPIO126, AF2, FAST)
+#define GPIO127_LCD_DD26	MFP_CFG_DRV(GPIO127, AF2, FAST)
+#define GPIO128_LCD_DD27	MFP_CFG_DRV(GPIO128, AF2, FAST)
+#define GPIO129_LCD_DD28	MFP_CFG_DRV(GPIO129, AF2, FAST)
+#define GPIO130_LCD_DD29	MFP_CFG_DRV(GPIO130, AF2, FAST)
+#define GPIO135_LCD_DD30	MFP_CFG_DRV(GPIO135, AF2, FAST)
+#define GPIO137_LCD_DD31	MFP_CFG_DRV(GPIO137, AF2, FAST)
+#define GPIO138_LCD_DD32	MFP_CFG_DRV(GPIO138, AF2, FAST)
+#define GPIO140_LCD_DD34	MFP_CFG_DRV(GPIO140, AF2, FAST)
+#define GPIO141_LCD_DD35	MFP_CFG_DRV(GPIO141, AF2, FAST)
+
+/* I2C */
+#define GPIO43_TWSI2_SCL	MFP_CFG_DRV(GPIO43, AF1, SLOW)
+#define GPIO44_TWSI2_SDA	MFP_CFG_DRV(GPIO44, AF1, SLOW)
+#define GPIO71_TWSI3_SCL	MFP_CFG_DRV(GPIO71, AF1, SLOW)
+#define GPIO72_TWSI3_SDA	MFP_CFG_DRV(GPIO72, AF1, SLOW)
+#define GPIO99_TWSI5_SCL	MFP_CFG_DRV(GPIO99, AF4, SLOW)
+#define GPIO100_TWSI5_SDA	MFP_CFG_DRV(GPIO100, AF4, SLOW)
+#define GPIO97_TWSI6_SCL	MFP_CFG_DRV(GPIO97, AF2, SLOW)
+#define GPIO98_TWSI6_SDA	MFP_CFG_DRV(GPIO98, AF2, SLOW)
+
+/* SSPA1 */
+#define GPIO24_I2S_SYSCLK	MFP_CFG(GPIO24, AF1)
+#define GPIO25_I2S_BITCLK	MFP_CFG(GPIO25, AF1)
+#define GPIO26_I2S_SYNC		MFP_CFG(GPIO26, AF1)
+#define GPIO27_I2S_DATA_OUT	MFP_CFG(GPIO27, AF1)
+#define GPIO28_I2S_SDATA_IN	MFP_CFG(GPIO28, AF1)
+#define GPIO114_I2S_MCLK	MFP_CFG(GPIO114, AF1)
+
+/* SSPA2 */
+#define GPIO33_SSPA2_CLK	MFP_CFG(GPIO33, AF1)
+#define GPIO34_SSPA2_FRM	MFP_CFG(GPIO34, AF1)
+#define GPIO35_SSPA2_TXD	MFP_CFG(GPIO35, AF1)
+#define GPIO36_SSPA2_RXD	MFP_CFG(GPIO36, AF1)
+
+/* Keypad */
+#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
+#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
+#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
+#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
+#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
+#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
+#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
+#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
+#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
+#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
+#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
+#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
+#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
+#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
+#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
+#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
+#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
+#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
+#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
+#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
+#define GPIO20_KP_DKIN4		MFP_CFG(GPIO20, AF1)
+#define GPIO21_KP_DKIN5		MFP_CFG(GPIO21, AF1)
+#define GPIO22_KP_DKIN6		MFP_CFG(GPIO22, AF1)
+#define GPIO23_KP_DKIN7		MFP_CFG(GPIO23, AF1)
+
+/* CAMERA */
+#define GPIO59_CCIC_IN7		MFP_CFG_DRV(GPIO59, AF1, FAST)
+#define GPIO60_CCIC_IN6		MFP_CFG_DRV(GPIO60, AF1, FAST)
+#define GPIO61_CCIC_IN5		MFP_CFG_DRV(GPIO61, AF1, FAST)
+#define GPIO62_CCIC_IN4		MFP_CFG_DRV(GPIO62, AF1, FAST)
+#define GPIO63_CCIC_IN3		MFP_CFG_DRV(GPIO63, AF1, FAST)
+#define GPIO64_CCIC_IN2		MFP_CFG_DRV(GPIO64, AF1, FAST)
+#define GPIO65_CCIC_IN1		MFP_CFG_DRV(GPIO65, AF1, FAST)
+#define GPIO66_CCIC_IN0		MFP_CFG_DRV(GPIO66, AF1, FAST)
+#define GPIO67_CAM_HSYNC	MFP_CFG_DRV(GPIO67, AF1, FAST)
+#define GPIO68_CAM_VSYNC	MFP_CFG_DRV(GPIO68, AF1, FAST)
+#define GPIO69_CAM_MCLK		MFP_CFG_DRV(GPIO69, AF1, FAST)
+#define GPIO70_CAM_PCLK		MFP_CFG_DRV(GPIO70, AF1, FAST)
+
+/* Wifi */
+#define GPIO45_GPIO45		MFP_CFG(GPIO45, AF0)
+#define GPIO46_GPIO46		MFP_CFG(GPIO46, AF0)
+#define GPIO21_GPIO21		MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO22		MFP_CFG(GPIO22, AF0)
+#define GPIO55_GPIO55		MFP_CFG(GPIO55, AF0)
+#define GPIO56_GPIO56		MFP_CFG(GPIO56, AF0)
+#define GPIO57_GPIO57		MFP_CFG(GPIO57, AF0)
+#define GPIO58_GPIO58		MFP_CFG(GPIO58, AF0)
+
+/* Codec*/
+#define GPIO23_GPIO23		MFP_CFG(GPIO23, AF0)
+
+#define GPIO101_GPIO101		MFP_CFG(GPIO101, AF0)
+
+/* PMIC */
+#define PMIC_PMIC_INT		MFP_CFG(PMIC_INT, AF0)
+
+#endif /* __ASM_MACH_MFP_MMP2_H */
+
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 3b216bf..ded43c4 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -193,7 +193,9 @@
 #define GPIO32_CF_nCD1		MFP_CFG(GPIO32, AF3)
 #define GPIO33_CF_nCD2		MFP_CFG(GPIO33, AF3)
 
-/* UART1 */
+/* UART */
+#define GPIO88_UART2_TXD	MFP_CFG(GPIO88, AF2)
+#define GPIO89_UART2_RXD	MFP_CFG(GPIO89, AF2)
 #define GPIO107_UART1_TXD	MFP_CFG_DRV(GPIO107, AF1, FAST)
 #define GPIO107_UART1_RXD	MFP_CFG_DRV(GPIO107, AF2, FAST)
 #define GPIO108_UART1_RXD	MFP_CFG_DRV(GPIO108, AF1, FAST)
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
new file mode 100644
index 0000000..459f3be
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -0,0 +1,60 @@
+#ifndef __ASM_MACH_MMP2_H
+#define __ASM_MACH_MMP2_H
+
+#include <linux/i2c.h>
+#include <mach/devices.h>
+#include <plat/i2c.h>
+
+extern struct pxa_device_desc mmp2_device_uart1;
+extern struct pxa_device_desc mmp2_device_uart2;
+extern struct pxa_device_desc mmp2_device_uart3;
+extern struct pxa_device_desc mmp2_device_uart4;
+extern struct pxa_device_desc mmp2_device_twsi1;
+extern struct pxa_device_desc mmp2_device_twsi2;
+extern struct pxa_device_desc mmp2_device_twsi3;
+extern struct pxa_device_desc mmp2_device_twsi4;
+extern struct pxa_device_desc mmp2_device_twsi5;
+extern struct pxa_device_desc mmp2_device_twsi6;
+
+static inline int mmp2_add_uart(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &mmp2_device_uart1; break;
+	case 2: d = &mmp2_device_uart2; break;
+	case 3: d = &mmp2_device_uart3; break;
+	case 4: d = &mmp2_device_uart4; break;
+	default:
+		return -EINVAL;
+	}
+
+	return pxa_register_device(d, NULL, 0);
+}
+
+static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data,
+				  struct i2c_board_info *info, unsigned size)
+{
+	struct pxa_device_desc *d = NULL;
+	int ret;
+
+	switch (id) {
+	case 0: d = &mmp2_device_twsi1; break;
+	case 1: d = &mmp2_device_twsi2; break;
+	case 2: d = &mmp2_device_twsi3; break;
+	case 3: d = &mmp2_device_twsi4; break;
+	case 4: d = &mmp2_device_twsi5; break;
+	case 5: d = &mmp2_device_twsi6; break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = i2c_register_board_info(id, info, size);
+	if (ret)
+		return ret;
+
+	return pxa_register_device(d, data, sizeof(*data));
+}
+
+#endif /* __ASM_MACH_MMP2_H */
+
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index 98ccbee..712af03 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -69,6 +69,47 @@
 #define APBC_PXA910_ASFAR	APBC_REG(0x050)
 #define APBC_PXA910_ASSAR	APBC_REG(0x054)
 
+/*
+ * APB Clock register offsets for MMP2
+ */
+#define APBC_MMP2_RTC		APBC_REG(0x000)
+#define APBC_MMP2_TWSI1		APBC_REG(0x004)
+#define APBC_MMP2_TWSI2		APBC_REG(0x008)
+#define APBC_MMP2_TWSI3		APBC_REG(0x00c)
+#define APBC_MMP2_TWSI4		APBC_REG(0x010)
+#define APBC_MMP2_ONEWIRE	APBC_REG(0x014)
+#define APBC_MMP2_KPC		APBC_REG(0x018)
+#define APBC_MMP2_TB_ROTARY	APBC_REG(0x01c)
+#define APBC_MMP2_SW_JTAG	APBC_REG(0x020)
+#define APBC_MMP2_TIMERS	APBC_REG(0x024)
+#define APBC_MMP2_UART1		APBC_REG(0x02c)
+#define APBC_MMP2_UART2		APBC_REG(0x030)
+#define APBC_MMP2_UART3		APBC_REG(0x034)
+#define APBC_MMP2_GPIO		APBC_REG(0x038)
+#define APBC_MMP2_PWM0		APBC_REG(0x03c)
+#define APBC_MMP2_PWM1		APBC_REG(0x040)
+#define APBC_MMP2_PWM2		APBC_REG(0x044)
+#define APBC_MMP2_PWM3		APBC_REG(0x048)
+#define APBC_MMP2_SSP0		APBC_REG(0x04c)
+#define APBC_MMP2_SSP1		APBC_REG(0x050)
+#define APBC_MMP2_SSP2		APBC_REG(0x054)
+#define APBC_MMP2_SSP3		APBC_REG(0x058)
+#define APBC_MMP2_SSP4		APBC_REG(0x05c)
+#define APBC_MMP2_SSP5		APBC_REG(0x060)
+#define APBC_MMP2_AIB		APBC_REG(0x064)
+#define APBC_MMP2_ASFAR		APBC_REG(0x068)
+#define APBC_MMP2_ASSAR		APBC_REG(0x06c)
+#define APBC_MMP2_USIM		APBC_REG(0x070)
+#define APBC_MMP2_MPMU		APBC_REG(0x074)
+#define APBC_MMP2_IPC		APBC_REG(0x078)
+#define APBC_MMP2_TWSI5		APBC_REG(0x07c)
+#define APBC_MMP2_TWSI6		APBC_REG(0x080)
+#define APBC_MMP2_TWSI_INTSTS	APBC_REG(0x084)
+#define APBC_MMP2_UART4		APBC_REG(0x088)
+#define APBC_MMP2_RIPC		APBC_REG(0x08c)
+#define APBC_MMP2_THSENS1	APBC_REG(0x090)	/* Thermal Sensor */
+#define APBC_MMP2_THSENS_INTSTS	APBC_REG(0x0a4)
+
 /* Common APB clock register bit definitions */
 #define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
 #define APBC_FNCLK	(1 << 1)  /* Functional Clock Enable */
diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/include/mach/regs-icu.h
index e5f0872..f882d91 100644
--- a/arch/arm/mach-mmp/include/mach/regs-icu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-icu.h
@@ -17,10 +17,12 @@
 #define ICU_REG(x)	(ICU_VIRT_BASE + (x))
 
 #define ICU_INT_CONF(n)		ICU_REG((n) << 2)
+#define ICU_INT_CONF_MASK	(0xf)
+
+/************ PXA168/PXA910 (MMP) *********************/
 #define ICU_INT_CONF_AP_INT	(1 << 6)
 #define ICU_INT_CONF_CP_INT	(1 << 5)
 #define ICU_INT_CONF_IRQ	(1 << 4)
-#define ICU_INT_CONF_MASK	(0xf)
 
 #define ICU_AP_FIQ_SEL_INT_NUM	ICU_REG(0x108)	/* AP FIQ Selected Interrupt */
 #define ICU_AP_IRQ_SEL_INT_NUM	ICU_REG(0x10C)	/* AP IRQ Selected Interrupt */
@@ -28,4 +30,42 @@
 #define ICU_INT_STATUS_0	ICU_REG(0x128)	/* Interrupt Stuats 0 */
 #define ICU_INT_STATUS_1	ICU_REG(0x12C)	/* Interrupt Status 1 */
 
+/************************** MMP2 ***********************/
+
+/*
+ * IRQ0/FIQ0 is routed to SP IRQ/FIQ.
+ * IRQ1 is routed to PJ4 IRQ, and IRQ2 is routes to PJ4 FIQ.
+ */
+#define ICU_INT_ROUTE_SP_IRQ		(1 << 4)
+#define ICU_INT_ROUTE_PJ4_IRQ		(1 << 5)
+#define ICU_INT_ROUTE_PJ4_FIQ		(1 << 6)
+
+#define MMP2_ICU_PJ4_IRQ_STATUS0	ICU_REG(0x138)
+#define MMP2_ICU_PJ4_IRQ_STATUS1	ICU_REG(0x13c)
+#define MMP2_ICU_PJ4_FIQ_STATUS0	ICU_REG(0x140)
+#define MMP2_ICU_PJ4_FIQ_STATUS1	ICU_REG(0x144)
+
+#define MMP2_ICU_INT4_STATUS		ICU_REG(0x150)
+#define MMP2_ICU_INT5_STATUS		ICU_REG(0x154)
+#define MMP2_ICU_INT17_STATUS		ICU_REG(0x158)
+#define MMP2_ICU_INT35_STATUS		ICU_REG(0x15c)
+#define MMP2_ICU_INT51_STATUS		ICU_REG(0x160)
+
+#define MMP2_ICU_INT4_MASK		ICU_REG(0x168)
+#define MMP2_ICU_INT5_MASK		ICU_REG(0x16C)
+#define MMP2_ICU_INT17_MASK		ICU_REG(0x170)
+#define MMP2_ICU_INT35_MASK		ICU_REG(0x174)
+#define MMP2_ICU_INT51_MASK		ICU_REG(0x178)
+
+#define MMP2_ICU_SP_IRQ_SEL		ICU_REG(0x100)
+#define MMP2_ICU_PJ4_IRQ_SEL		ICU_REG(0x104)
+#define MMP2_ICU_PJ4_FIQ_SEL		ICU_REG(0x108)
+
+#define MMP2_ICU_INVERT			ICU_REG(0x164)
+
+#define MMP2_ICU_INV_PMIC		(1 << 0)
+#define MMP2_ICU_INV_PERF		(1 << 1)
+#define MMP2_ICU_INV_COMMTX		(1 << 2)
+#define MMP2_ICU_INV_COMMRX		(1 << 3)
+
 #endif /* __ASM_MACH_ICU_H */
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
index c93d5fa..a7dcc53 100644
--- a/arch/arm/mach-mmp/include/mach/uncompress.h
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -8,15 +8,16 @@
 
 #include <linux/serial_reg.h>
 #include <mach/addr-map.h>
+#include <asm/mach-types.h>
 
 #define UART1_BASE	(APB_PHYS_BASE + 0x36000)
 #define UART2_BASE	(APB_PHYS_BASE + 0x17000)
 #define UART3_BASE	(APB_PHYS_BASE + 0x18000)
 
+static volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+
 static inline void putc(char c)
 {
-	volatile unsigned long *UART = (unsigned long *)UART2_BASE;
-
 	/* UART enabled? */
 	if (!(UART[UART_IER] & UART_IER_UUE))
 		return;
@@ -34,8 +35,14 @@
 {
 }
 
+static inline void arch_decomp_setup(void)
+{
+	if (machine_is_avengers_lite())
+		UART = (unsigned long *)UART3_BASE;
+}
+
 /*
  * nothing to do
  */
-#define arch_decomp_setup()
+
 #define arch_decomp_wdog()
diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c
new file mode 100644
index 0000000..cb18221
--- /dev/null
+++ b/arch/arm/mach-mmp/irq-mmp2.c
@@ -0,0 +1,154 @@
+/*
+ *  linux/arch/arm/mach-mmp/irq-mmp2.c
+ *
+ *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *
+ *  Author:	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *  Copyright:	Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/regs-icu.h>
+
+#include "common.h"
+
+static void icu_mask_irq(unsigned int irq)
+{
+	uint32_t r = __raw_readl(ICU_INT_CONF(irq));
+
+	r &= ~ICU_INT_ROUTE_PJ4_IRQ;
+	__raw_writel(r, ICU_INT_CONF(irq));
+}
+
+static void icu_unmask_irq(unsigned int irq)
+{
+	uint32_t r = __raw_readl(ICU_INT_CONF(irq));
+
+	r |= ICU_INT_ROUTE_PJ4_IRQ;
+	__raw_writel(r, ICU_INT_CONF(irq));
+}
+
+static struct irq_chip icu_irq_chip = {
+	.name		= "icu_irq",
+	.mask		= icu_mask_irq,
+	.mask_ack	= icu_mask_irq,
+	.unmask		= icu_unmask_irq,
+};
+
+static void pmic_irq_ack(unsigned int irq)
+{
+	if (irq == IRQ_MMP2_PMIC)
+		mmp2_clear_pmic_int();
+}
+
+#define SECOND_IRQ_MASK(_name_, irq_base, prefix)			\
+static void _name_##_mask_irq(unsigned int irq)				\
+{									\
+	uint32_t r;							\
+	r = __raw_readl(prefix##_MASK) | (1 << (irq - irq_base));	\
+	__raw_writel(r, prefix##_MASK);					\
+}
+
+#define SECOND_IRQ_UNMASK(_name_, irq_base, prefix)			\
+static void _name_##_unmask_irq(unsigned int irq)			\
+{									\
+	uint32_t r;							\
+	r = __raw_readl(prefix##_MASK) & ~(1 << (irq - irq_base));	\
+	__raw_writel(r, prefix##_MASK);					\
+}
+
+#define SECOND_IRQ_DEMUX(_name_, irq_base, prefix)			\
+static void _name_##_irq_demux(unsigned int irq, struct irq_desc *desc)	\
+{									\
+	unsigned long status, mask, n;					\
+	mask = __raw_readl(prefix##_MASK);				\
+	while (1) {							\
+		status = __raw_readl(prefix##_STATUS) & ~mask;		\
+		if (status == 0)					\
+			break;						\
+		n = find_first_bit(&status, BITS_PER_LONG);		\
+		while (n < BITS_PER_LONG) {				\
+			generic_handle_irq(irq_base + n);		\
+			n = find_next_bit(&status, BITS_PER_LONG, n+1);	\
+		}							\
+	}								\
+}
+
+#define SECOND_IRQ_CHIP(_name_, irq_base, prefix)			\
+SECOND_IRQ_MASK(_name_, irq_base, prefix)				\
+SECOND_IRQ_UNMASK(_name_, irq_base, prefix)				\
+SECOND_IRQ_DEMUX(_name_, irq_base, prefix)				\
+static struct irq_chip _name_##_irq_chip = {				\
+	.name		= #_name_,					\
+	.mask		= _name_##_mask_irq,				\
+	.unmask		= _name_##_unmask_irq,				\
+}
+
+SECOND_IRQ_CHIP(pmic, IRQ_MMP2_PMIC_BASE, MMP2_ICU_INT4);
+SECOND_IRQ_CHIP(rtc,  IRQ_MMP2_RTC_BASE,  MMP2_ICU_INT5);
+SECOND_IRQ_CHIP(twsi, IRQ_MMP2_TWSI_BASE, MMP2_ICU_INT17);
+SECOND_IRQ_CHIP(misc, IRQ_MMP2_MISC_BASE, MMP2_ICU_INT35);
+SECOND_IRQ_CHIP(ssp,  IRQ_MMP2_SSP_BASE,  MMP2_ICU_INT51);
+
+static void init_mux_irq(struct irq_chip *chip, int start, int num)
+{
+	int irq;
+
+	for (irq = start; num > 0; irq++, num--) {
+		/* mask and clear the IRQ */
+		chip->mask(irq);
+		if (chip->ack)
+			chip->ack(irq);
+
+		set_irq_chip(irq, chip);
+		set_irq_flags(irq, IRQF_VALID);
+		set_irq_handler(irq, handle_level_irq);
+	}
+}
+
+void __init mmp2_init_icu(void)
+{
+	int irq;
+
+	for (irq = 0; irq < IRQ_MMP2_MUX_BASE; irq++) {
+		icu_mask_irq(irq);
+		set_irq_chip(irq, &icu_irq_chip);
+		set_irq_flags(irq, IRQF_VALID);
+
+		switch (irq) {
+		case IRQ_MMP2_PMIC_MUX:
+		case IRQ_MMP2_RTC_MUX:
+		case IRQ_MMP2_TWSI_MUX:
+		case IRQ_MMP2_MISC_MUX:
+		case IRQ_MMP2_SSP_MUX:
+			break;
+		default:
+			set_irq_handler(irq, handle_level_irq);
+			break;
+		}
+	}
+
+	/* NOTE: IRQ_MMP2_PMIC requires the PMIC MFPR register
+	 * to be written to clear the interrupt
+	 */
+	pmic_irq_chip.ack = pmic_irq_ack;
+
+	init_mux_irq(&pmic_irq_chip, IRQ_MMP2_PMIC_BASE, 2);
+	init_mux_irq(&rtc_irq_chip, IRQ_MMP2_RTC_BASE, 2);
+	init_mux_irq(&twsi_irq_chip, IRQ_MMP2_TWSI_BASE, 5);
+	init_mux_irq(&misc_irq_chip, IRQ_MMP2_MISC_BASE, 15);
+	init_mux_irq(&ssp_irq_chip, IRQ_MMP2_SSP_BASE, 2);
+
+	set_irq_chained_handler(IRQ_MMP2_PMIC_MUX, pmic_irq_demux);
+	set_irq_chained_handler(IRQ_MMP2_RTC_MUX, rtc_irq_demux);
+	set_irq_chained_handler(IRQ_MMP2_TWSI_MUX, twsi_irq_demux);
+	set_irq_chained_handler(IRQ_MMP2_MISC_MUX, misc_irq_demux);
+	set_irq_chained_handler(IRQ_MMP2_SSP_MUX, ssp_irq_demux);
+}
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq-pxa168.c
similarity index 100%
rename from arch/arm/mach-mmp/irq.c
rename to arch/arm/mach-mmp/irq-pxa168.c
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
new file mode 100644
index 0000000..cfd4d66
--- /dev/null
+++ b/arch/arm/mach-mmp/jasper.c
@@ -0,0 +1,80 @@
+/*
+ *  linux/arch/arm/mach-mmp/jasper.c
+ *
+ *  Support for the Marvell Jasper Development Platform.
+ *
+ *  Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+
+#include "common.h"
+
+static unsigned long jasper_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO29_UART1_RXD,
+	GPIO30_UART1_TXD,
+
+	/* UART3 */
+	GPIO51_UART3_RXD,
+	GPIO52_UART3_TXD,
+
+	/* DFI */
+	GPIO168_DFI_D0,
+	GPIO167_DFI_D1,
+	GPIO166_DFI_D2,
+	GPIO165_DFI_D3,
+	GPIO107_DFI_D4,
+	GPIO106_DFI_D5,
+	GPIO105_DFI_D6,
+	GPIO104_DFI_D7,
+	GPIO111_DFI_D8,
+	GPIO164_DFI_D9,
+	GPIO163_DFI_D10,
+	GPIO162_DFI_D11,
+	GPIO161_DFI_D12,
+	GPIO110_DFI_D13,
+	GPIO109_DFI_D14,
+	GPIO108_DFI_D15,
+	GPIO143_ND_nCS0,
+	GPIO144_ND_nCS1,
+	GPIO147_ND_nWE,
+	GPIO148_ND_nRE,
+	GPIO150_ND_ALE,
+	GPIO149_ND_CLE,
+	GPIO112_ND_RDY0,
+	GPIO160_ND_RDY1,
+};
+
+static void __init jasper_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
+
+	/* on-chip devices */
+	mmp2_add_uart(1);
+	mmp2_add_uart(3);
+}
+
+MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = mmp2_init_irq,
+	.timer          = &mmp2_timer,
+	.init_machine   = jasper_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
new file mode 100644
index 0000000..72eb9da
--- /dev/null
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -0,0 +1,123 @@
+/*
+ * linux/arch/arm/mach-mmp/mmp2.c
+ *
+ * code name MMP2
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/addr-map.h>
+#include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
+#include <mach/cputype.h>
+#include <mach/irqs.h>
+#include <mach/mfp.h>
+#include <mach/gpio.h>
+#include <mach/devices.h>
+
+#include "common.h"
+#include "clock.h"
+
+#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
+
+#define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)
+
+static struct mfp_addr_map mmp2_addr_map[] __initdata = {
+	MFP_ADDR(PMIC_INT, 0x2c4),
+
+	MFP_ADDR_END,
+};
+
+void mmp2_clear_pmic_int(void)
+{
+	unsigned long mfpr_pmic, data;
+
+	mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
+	data = __raw_readl(mfpr_pmic);
+	__raw_writel(data | (1 << 6), mfpr_pmic);
+	__raw_writel(data, mfpr_pmic);
+}
+
+static void __init mmp2_init_gpio(void)
+{
+	int i;
+
+	/* enable GPIO clock */
+	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);
+
+	/* unmask GPIO edge detection for all 6 banks -- APMASKx */
+	for (i = 0; i < 6; i++)
+		__raw_writel(0xffffffff, APMASK(i));
+
+	pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL);
+}
+
+void __init mmp2_init_irq(void)
+{
+	mmp2_init_icu();
+	mmp2_init_gpio();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
+static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
+static APBC_CLK(uart3, MMP2_UART3, 1, 26000000);
+static APBC_CLK(uart4, MMP2_UART4, 1, 26000000);
+static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000);
+static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000);
+static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
+static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
+static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
+static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
+static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
+
+static APMU_CLK(nand, NAND, 0xbf, 100000000);
+
+static struct clk_lookup mmp2_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
+	INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
+	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
+	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+};
+
+static int __init mmp2_init(void)
+{
+	if (cpu_is_mmp2()) {
+		mfp_init_base(MFPR_VIRT_BASE);
+		mfp_init_addr(mmp2_addr_map);
+		clks_register(ARRAY_AND_SIZE(mmp2_clkregs));
+	}
+
+	return 0;
+}
+postcore_initcall(mmp2_init);
+
+/* on-chip devices */
+MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
+MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
+MMP2_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4018000, 0x30, 22, 23);
+MMP2_DEVICE(uart4, "pxa2xx-uart", 3, UART4, 0xd4016000, 0x30, 18, 19);
+MMP2_DEVICE(twsi1, "pxa2xx-i2c", 0, TWSI1, 0xd4011000, 0x70);
+MMP2_DEVICE(twsi2, "pxa2xx-i2c", 1, TWSI2, 0xd4031000, 0x70);
+MMP2_DEVICE(twsi3, "pxa2xx-i2c", 2, TWSI3, 0xd4032000, 0x70);
+MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70);
+MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
+MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
+MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);
+
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index a8400bb..cf75694 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -30,7 +30,10 @@
 
 #include <mach/addr-map.h>
 #include <mach/regs-timers.h>
+#include <mach/regs-apbc.h>
 #include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <asm/mach/time.h>
 
 #include "clock.h"
 
@@ -158,7 +161,7 @@
 
 	__raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
 
-	ccr &= TMR_CCR_CS_0(0x3);
+	ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3);
 	__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
 
 	/* free-running mode */
@@ -197,3 +200,24 @@
 	clocksource_register(&cksrc);
 	clockevents_register_device(&ckevt);
 }
+
+static void __init mmp2_timer_init(void)
+{
+	unsigned long clk_rst;
+
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
+
+	/*
+	 * enable bus/functional clock, enable 6.5MHz (divider 4),
+	 * release reset
+	 */
+	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
+	__raw_writel(clk_rst, APBC_MMP2_TIMERS);
+
+	timer_init(IRQ_MMP2_TIMER1);
+}
+
+struct sys_timer mmp2_timer = {
+	.init	= mmp2_timer_init,
+};
+
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index 6fbe68f..f2d309d 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -14,6 +14,12 @@
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-78x00-mASA Reference Design.
 
+config MACH_TERASTATION_WXL
+	bool "Buffalo WLX (Terastation Duo) NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo WXL Nas.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index da628b7..67a13f9 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,3 +1,4 @@
-obj-y				+= common.o addr-map.o irq.o pcie.o
+obj-y				+= common.o addr-map.o mpp.o irq.o pcie.o
 obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
 obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
+obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
new file mode 100644
index 0000000..61e5e58
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+ *
+ * Buffalo WXL (Terastation Duo) Setup routines
+ *
+ * sebastien requiem <sebastien@requiem.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/i2c.h>
+#include <mach/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+#include "mpp.h"
+
+
+/* This arch has 2 Giga Ethernet */
+
+static struct mv643xx_eth_platform_data db78x00_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+
+/* 2 SATA controller supporting HotPlug */
+
+static struct mv_sata_platform_data db78x00_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct i2c_board_info __initdata db78x00_i2c_rtc = {
+	I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+
+static unsigned int wxl_mpp_config[] __initdata = {
+	MPP0_GE1_TXCLK,
+	MPP1_GE1_TXCTL,
+	MPP2_GE1_RXCTL,
+	MPP3_GE1_RXCLK,
+	MPP4_GE1_TXD0,
+	MPP5_GE1_TXD1,
+	MPP6_GE1_TXD2,
+	MPP7_GE1_TXD3,
+	MPP8_GE1_RXD0,
+	MPP9_GE1_RXD1,
+	MPP10_GE1_RXD2,
+	MPP11_GE1_RXD3,
+	MPP12_GPIO,
+	MPP13_SYSRST_OUTn,
+	MPP14_SATA1_ACTn,
+	MPP15_SATA0_ACTn,
+	MPP16_GPIO,
+	MPP17_GPIO,
+	MPP18_GPIO,
+	MPP19_GPIO,
+	MPP20_GPIO,
+	MPP21_GPIO,
+	MPP22_GPIO,
+	MPP23_GPIO,
+	MPP24_UA2_TXD,
+	MPP25_UA2_RXD,
+	MPP26_UA2_CTSn,
+	MPP27_UA2_RTSn,
+	MPP28_GPIO,
+	MPP29_SYSRST_OUTn,
+	MPP30_GPIO,
+	MPP31_GPIO,
+	MPP32_GPIO,
+	MPP33_GPIO,
+	MPP34_GPIO,
+	MPP35_GPIO,
+	MPP36_GPIO,
+	MPP37_GPIO,
+	MPP38_GPIO,
+	MPP39_GPIO,
+	MPP40_UNUSED,
+	MPP41_UNUSED,
+	MPP42_UNUSED,
+	MPP43_UNUSED,
+	MPP44_UNUSED,
+	MPP45_UNUSED,
+	MPP46_UNUSED,
+	MPP47_UNUSED,
+	MPP48_SATA1_ACTn,
+	MPP49_SATA0_ACTn,
+	0
+};
+
+
+static void __init wxl_init(void)
+{
+	/*
+	 * Basic MV78xx0 setup. Needs to be called early.
+	 */
+	mv78xx0_init();
+	mv78xx0_mpp_conf(wxl_mpp_config);
+
+	/*
+	 * Partition on-chip peripherals between the two CPU cores.
+	 */
+	mv78xx0_ehci0_init();
+	mv78xx0_ehci1_init();
+	mv78xx0_ehci2_init();
+	mv78xx0_ge00_init(&db78x00_ge00_data);
+	mv78xx0_ge01_init(&db78x00_ge01_data);
+	mv78xx0_sata_init(&db78x00_sata_data);
+	mv78xx0_uart0_init();
+	mv78xx0_uart1_init();
+	mv78xx0_uart2_init();
+	mv78xx0_uart3_init();
+	mv78xx0_i2c_init();
+	i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
+}
+
+static int __init wxl_pci_init(void)
+{
+	if (machine_is_terastation_wxl()) {
+		/*
+		 * Assign the x16 PCIe slot on the board to CPU core
+		 * #0, and let CPU core #1 have the four x1 slots.
+		 */
+		if (mv78xx0_core_index() == 0)
+			mv78xx0_pcie_init(0, 1);
+		else
+			mv78xx0_pcie_init(1, 0);
+	}
+
+	return 0;
+}
+subsys_initcall(wxl_pci_init);
+
+MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
+	/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
+	.phys_io	= MV78XX0_REGS_PHYS_BASE,
+	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= wxl_init,
+	.map_io		= mv78xx0_map_io,
+	.init_irq	= mv78xx0_init_irq,
+	.timer		= &mv78xx0_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
new file mode 100644
index 0000000..354ac51
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-mv78x00/mpp.c
+ *
+ * MPP functions for Marvell MV78x00 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/gpio.h>
+#include <mach/hardware.h>
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int __init mv78xx0_variant(void)
+{
+	u32 dev, rev;
+
+	mv78xx0_pcie_id(&dev, &rev);
+
+	if (dev == MV78100_DEV_ID && rev >= MV78100_REV_A0)
+		return MPP_78100_A0_MASK;
+
+	printk(KERN_ERR "MPP setup: unknown mv78x00 variant "
+			"(dev %#x rev %#x)\n", dev, rev);
+	return 0;
+}
+
+#define MPP_CTRL(i)	(DEV_BUS_VIRT_BASE + (i) * 4)
+#define MPP_NR_REGS	(1 + MPP_MAX/8)
+
+void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
+{
+	u32 mpp_ctrl[MPP_NR_REGS];
+	unsigned int variant_mask;
+	int i;
+
+	variant_mask = mv78xx0_variant();
+	if (!variant_mask)
+		return;
+
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
+	printk(KERN_DEBUG "initial MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		mpp_ctrl[i] = readl(MPP_CTRL(i));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+
+	while (*mpp_list) {
+		unsigned int num = MPP_NUM(*mpp_list);
+		unsigned int sel = MPP_SEL(*mpp_list);
+		int shift, gpio_mode;
+
+		if (num > MPP_MAX) {
+			printk(KERN_ERR "mv78xx0_mpp_conf: invalid MPP "
+					"number (%u)\n", num);
+			continue;
+		}
+		if (!(*mpp_list & variant_mask)) {
+			printk(KERN_WARNING
+					"mv78xx0_mpp_conf: requested MPP%u config "
+					"unavailable on this hardware\n", num);
+			continue;
+		}
+
+		shift = (num & 7) << 2;
+		mpp_ctrl[num / 8] &= ~(0xf << shift);
+		mpp_ctrl[num / 8] |= sel << shift;
+
+		gpio_mode = 0;
+		if (*mpp_list & MPP_INPUT_MASK)
+			gpio_mode |= GPIO_INPUT_OK;
+		if (*mpp_list & MPP_OUTPUT_MASK)
+			gpio_mode |= GPIO_OUTPUT_OK;
+		if (sel != 0)
+			gpio_mode = 0;
+		orion_gpio_set_valid(num, gpio_mode);
+
+		mpp_list++;
+	}
+
+	printk(KERN_DEBUG "  final MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		writel(mpp_ctrl[i], MPP_CTRL(i));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+}
diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h
new file mode 100644
index 0000000..80840b7
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mpp.h
@@ -0,0 +1,347 @@
+/*
+ * linux/arch/arm/mach-mv78xx0/mpp.h -- Multi Purpose Pins
+ *
+ *
+ * sebastien requiem <sebastien@requiem.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MV78X00_MPP_H
+#define __MV78X00_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _78100_A0) (\
+    /* MPP number */        ((_num) & 0xff) | \
+    /* MPP select value */        (((_sel) & 0xf) << 8) | \
+    /* may be input signal */    ((!!(_in)) << 12) | \
+    /* may be output signal */    ((!!(_out)) << 13) | \
+    /* available on A0 */    ((!!(_78100_A0)) << 14))
+
+#define MPP_NUM(x)    ((x) & 0xff)
+#define MPP_SEL(x)    (((x) >> 8) & 0xf)
+
+                /*   num sel  i  o  78100_A0  */
+
+#define MPP_INPUT_MASK        MPP(0, 0x0, 1, 0, 0)
+#define MPP_OUTPUT_MASK        MPP(0, 0x0, 0, 1, 0)
+
+#define MPP_78100_A0_MASK    MPP(0, 0x0, 0, 0, 1)
+
+#define MPP0_GPIO        MPP(0, 0x0, 1, 1, 1)
+#define MPP0_GE0_COL        MPP(0, 0x1, 1, 0, 1)
+#define MPP0_GE1_TXCLK        MPP(0, 0x2, 0, 1, 1)
+#define MPP0_UNUSED        MPP(0, 0x3, 0, 0, 1)
+
+#define MPP1_GPIO        MPP(1, 0x0, 1, 1, 1)
+#define MPP1_GE0_RXERR        MPP(1, 0x1, 1, 0, 1)
+#define MPP1_GE1_TXCTL        MPP(1, 0x2, 0, 1, 1)
+#define MPP1_UNUSED        MPP(1, 0x3, 0, 0, 1)
+
+#define MPP2_GPIO        MPP(2, 0x0, 1, 1, 1)
+#define MPP2_GE0_CRS        MPP(2, 0x1, 1, 0, 1)
+#define MPP2_GE1_RXCTL        MPP(2, 0x2, 1, 0, 1)
+#define MPP2_UNUSED        MPP(2, 0x3, 0, 0, 1)
+
+#define MPP3_GPIO        MPP(3, 0x0, 1, 1, 1)
+#define MPP3_GE0_TXERR        MPP(3, 0x1, 0, 1, 1)
+#define MPP3_GE1_RXCLK        MPP(3, 0x2, 1, 0, 1)
+#define MPP3_UNUSED        MPP(3, 0x3, 0, 0, 1)
+
+#define MPP4_GPIO        MPP(4, 0x0, 1, 1, 1)
+#define MPP4_GE0_TXD4        MPP(4, 0x1, 0, 1, 1)
+#define MPP4_GE1_TXD0        MPP(4, 0x2, 0, 1, 1)
+#define MPP4_UNUSED        MPP(4, 0x3, 0, 0, 1)
+
+#define MPP5_GPIO        MPP(5, 0x0, 1, 1, 1)
+#define MPP5_GE0_TXD5        MPP(5, 0x1, 0, 1, 1)
+#define MPP5_GE1_TXD1        MPP(5, 0x2, 0, 1, 1)
+#define MPP5_UNUSED        MPP(5, 0x3, 0, 0, 1)
+
+#define MPP6_GPIO        MPP(6, 0x0, 1, 1, 1)
+#define MPP6_GE0_TXD6        MPP(6, 0x1, 0, 1, 1)
+#define MPP6_GE1_TXD2        MPP(6, 0x2, 0, 1, 1)
+#define MPP6_UNUSED        MPP(6, 0x3, 0, 0, 1)
+
+#define MPP7_GPIO        MPP(7, 0x0, 1, 1, 1)
+#define MPP7_GE0_TXD7        MPP(7, 0x1, 0, 1, 1)
+#define MPP7_GE1_TXD3        MPP(7, 0x2, 0, 1, 1)
+#define MPP7_UNUSED        MPP(7, 0x3, 0, 0, 1)
+
+#define MPP8_GPIO        MPP(8, 0x0, 1, 1, 1)
+#define MPP8_GE0_RXD4        MPP(8, 0x1, 1, 0, 1)
+#define MPP8_GE1_RXD0        MPP(8, 0x2, 1, 0, 1)
+#define MPP8_UNUSED        MPP(8, 0x3, 0, 0, 1)
+
+#define MPP9_GPIO        MPP(9, 0x0, 1, 1, 1)
+#define MPP9_GE0_RXD5        MPP(9, 0x1, 1, 0, 1)
+#define MPP9_GE1_RXD1        MPP(9, 0x2, 1, 0, 1)
+#define MPP9_UNUSED        MPP(9, 0x3, 0, 0, 1)
+
+#define MPP10_GPIO        MPP(10, 0x0, 1, 1, 1)
+#define MPP10_GE0_RXD6        MPP(10, 0x1, 1, 0, 1)
+#define MPP10_GE1_RXD2        MPP(10, 0x2, 1, 0, 1)
+#define MPP10_UNUSED        MPP(10, 0x3, 0, 0, 1)
+
+#define MPP11_GPIO        MPP(11, 0x0, 1, 1, 1)
+#define MPP11_GE0_RXD7        MPP(11, 0x1, 1, 0, 1)
+#define MPP11_GE1_RXD3        MPP(11, 0x2, 1, 0, 1)
+#define MPP11_UNUSED        MPP(11, 0x3, 0, 0, 1)
+
+#define MPP12_GPIO        MPP(12, 0x0, 1, 1, 1)
+#define MPP12_M_BB        MPP(12, 0x3, 1, 0, 1)
+#define MPP12_UA0_CTSn        MPP(12, 0x4, 1, 0, 1)
+#define MPP12_NAND_FLASH_REn0    MPP(12, 0x5, 0, 1, 1)
+#define MPP12_TDM0_SCSn        MPP(12, 0X6, 0, 1, 1)
+#define MPP12_UNUSED        MPP(12, 0x1, 0, 0, 1)
+
+#define MPP13_GPIO        MPP(13, 0x0, 1, 1, 1)
+#define MPP13_SYSRST_OUTn    MPP(13, 0x3, 0, 1, 1)
+#define MPP13_UA0_RTSn        MPP(13, 0x4, 0, 1, 1)
+#define MPP13_NAN_FLASH_WEn0    MPP(13, 0x5, 0, 1, 1)
+#define MPP13_TDM_SCLK        MPP(13, 0x6, 0, 1, 1)
+#define MPP13_UNUSED        MPP(13, 0x1, 0, 0, 1)
+
+#define MPP14_GPIO        MPP(14, 0x0, 1, 1, 1)
+#define MPP14_SATA1_ACTn    MPP(14, 0x3, 0, 1, 1)
+#define MPP14_UA1_CTSn        MPP(14, 0x4, 1, 0, 1)
+#define MPP14_NAND_FLASH_REn1    MPP(14, 0x5, 0, 1, 1)
+#define MPP14_TDM_SMOSI        MPP(14, 0x6, 0, 1, 1)
+#define MPP14_UNUSED        MPP(14, 0x1, 0, 0, 1)
+
+#define MPP15_GPIO        MPP(15, 0x0, 1, 1, 1)
+#define MPP15_SATA0_ACTn    MPP(15, 0x3, 0, 1, 1)
+#define MPP15_UA1_RTSn        MPP(15, 0x4, 0, 1, 1)
+#define MPP15_NAND_FLASH_WEn1    MPP(15, 0x5, 0, 1, 1)
+#define MPP15_TDM_SMISO        MPP(15, 0x6, 1, 0, 1)
+#define MPP15_UNUSED        MPP(15, 0x1, 0, 0, 1)
+
+#define MPP16_GPIO        MPP(16, 0x0, 1, 1, 1)
+#define MPP16_SATA1_PRESENTn    MPP(16, 0x3, 0, 1, 1)
+#define MPP16_UA2_TXD        MPP(16, 0x4, 0, 1, 1)
+#define MPP16_NAND_FLASH_REn3    MPP(16, 0x5, 0, 1, 1)
+#define MPP16_TDM_INTn        MPP(16, 0x6, 1, 0, 1)
+#define MPP16_UNUSED        MPP(16, 0x1, 0, 0, 1)
+
+
+#define MPP17_GPIO        MPP(17, 0x0, 1, 1, 1)
+#define MPP17_SATA0_PRESENTn    MPP(17, 0x3, 0, 1, 1)
+#define MPP17_UA2_RXD        MPP(17, 0x4, 1, 0, 1)
+#define MPP17_NAND_FLASH_WEn3    MPP(17, 0x5, 0, 1, 1)
+#define MPP17_TDM_RSTn        MPP(17, 0x6, 0, 1, 1)
+#define MPP17_UNUSED        MPP(17, 0x1, 0, 0, 1)
+
+
+#define MPP18_GPIO        MPP(18, 0x0, 1, 1, 1)
+#define MPP18_UA0_CTSn        MPP(18, 0x4, 1, 0, 1)
+#define MPP18_BOOT_FLASH_REn    MPP(18, 0x5, 0, 1, 1)
+#define MPP18_UNUSED        MPP(18, 0x1, 0, 0, 1)
+
+
+
+#define MPP19_GPIO        MPP(19, 0x0, 1, 1, 1)
+#define MPP19_UA0_CTSn        MPP(19, 0x4, 0, 1, 1)
+#define MPP19_BOOT_FLASH_WEn    MPP(19, 0x5, 0, 1, 1)
+#define MPP19_UNUSED        MPP(19, 0x1, 0, 0, 1)
+
+
+#define MPP20_GPIO        MPP(20, 0x0, 1, 1, 1)
+#define MPP20_UA1_CTSs        MPP(20, 0x4, 1, 0, 1)
+#define MPP20_TDM_PCLK        MPP(20, 0x6, 1, 1, 0)
+#define MPP20_UNUSED        MPP(20, 0x1, 0, 0, 1)
+
+
+
+#define MPP21_GPIO        MPP(21, 0x0, 1, 1, 1)
+#define MPP21_UA1_CTSs        MPP(21, 0x4, 0, 1, 1)
+#define MPP21_TDM_FSYNC        MPP(21, 0x6, 1, 1, 0)
+#define MPP21_UNUSED        MPP(21, 0x1, 0, 0, 1)
+
+
+
+#define MPP22_GPIO        MPP(22, 0x0, 1, 1, 1)
+#define MPP22_UA3_TDX        MPP(22, 0x4, 0, 1, 1)
+#define MPP22_NAND_FLASH_REn2    MPP(22, 0x5, 0, 1, 1)
+#define MPP22_TDM_DRX        MPP(22, 0x6, 1, 0, 1)
+#define MPP22_UNUSED        MPP(22, 0x1, 0, 0, 1)
+
+
+
+#define MPP23_GPIO        MPP(23, 0x0, 1, 1, 1)
+#define MPP23_UA3_RDX        MPP(23, 0x4, 1, 0, 1)
+#define MPP23_NAND_FLASH_WEn2    MPP(23, 0x5, 0, 1, 1)
+#define MPP23_TDM_DTX        MPP(23, 0x6, 0, 1, 1)
+#define MPP23_UNUSED        MPP(23, 0x1, 0, 0, 1)
+
+
+#define MPP24_GPIO        MPP(24, 0x0, 1, 1, 1)
+#define MPP24_UA2_TXD        MPP(24, 0x4, 0, 1, 1)
+#define MPP24_TDM_INTn        MPP(24, 0x6, 1, 0, 1)
+#define MPP24_UNUSED        MPP(24, 0x1, 0, 0, 1)
+
+
+#define MPP25_GPIO        MPP(25, 0x0, 1, 1, 1)
+#define MPP25_UA2_RXD        MPP(25, 0x4, 1, 0, 1)
+#define MPP25_TDM_RSTn        MPP(25, 0x6, 0, 1, 1)
+#define MPP25_UNUSED        MPP(25, 0x1, 0, 0, 1)
+
+
+#define MPP26_GPIO        MPP(26, 0x0, 1, 1, 1)
+#define MPP26_UA2_CTSn        MPP(26, 0x4, 1, 0, 1)
+#define MPP26_TDM_PCLK        MPP(26, 0x6, 1, 1, 1)
+#define MPP26_UNUSED        MPP(26, 0x1, 0, 0, 1)
+
+
+#define MPP27_GPIO        MPP(27, 0x0, 1, 1, 1)
+#define MPP27_UA2_RTSn        MPP(27, 0x4, 0, 1, 1)
+#define MPP27_TDM_FSYNC        MPP(27, 0x6, 1, 1, 1)
+#define MPP27_UNUSED        MPP(27, 0x1, 0, 0, 1)
+
+
+#define MPP28_GPIO        MPP(28, 0x0, 1, 1, 1)
+#define MPP28_UA3_TXD        MPP(28, 0x4, 0, 1, 1)
+#define MPP28_TDM_DRX        MPP(28, 0x6, 1, 0, 1)
+#define MPP28_UNUSED        MPP(28, 0x1, 0, 0, 1)
+
+#define MPP29_GPIO        MPP(29, 0x0, 1, 1, 1)
+#define MPP29_UA3_RXD        MPP(29, 0x4, 1, 0, 1)
+#define MPP29_SYSRST_OUTn    MPP(29, 0x5, 0, 1, 1)
+#define MPP29_TDM_DTX        MPP(29, 0x6, 0, 1, 1)
+#define MPP29_UNUSED        MPP(29, 0x1, 0, 0, 1)
+
+#define MPP30_GPIO        MPP(30, 0x0, 1, 1, 1)
+#define MPP30_UA3_CTSn        MPP(30, 0x4, 1, 0, 1)
+#define MPP30_UNUSED        MPP(30, 0x1, 0, 0, 1)
+
+#define MPP31_GPIO        MPP(31, 0x0, 1, 1, 1)
+#define MPP31_UA3_RTSn        MPP(31, 0x4, 0, 1, 1)
+#define MPP31_TDM1_SCSn        MPP(31, 0x6, 0, 1, 1)
+#define MPP31_UNUSED        MPP(31, 0x1, 0, 0, 1)
+
+
+#define MPP32_GPIO        MPP(32, 0x1, 1, 1, 1)
+#define MPP32_UA3_TDX        MPP(32, 0x4, 0, 1, 1)
+#define MPP32_SYSRST_OUTn    MPP(32, 0x5, 0, 1, 1)
+#define MPP32_TDM0_RXQ        MPP(32, 0x6, 0, 1, 1)
+#define MPP32_UNUSED        MPP(32, 0x3, 0, 0, 1)
+
+
+#define MPP33_GPIO        MPP(33, 0x1, 1, 1, 1)
+#define MPP33_UA3_RDX        MPP(33, 0x4, 1, 0, 1)
+#define MPP33_TDM0_TXQ        MPP(33, 0x6, 0, 1, 1)
+#define MPP33_UNUSED        MPP(33, 0x3, 0, 0, 1)
+
+
+
+#define MPP34_GPIO        MPP(34, 0x1, 1, 1, 1)
+#define MPP34_UA2_TDX        MPP(34, 0x4, 0, 1, 1)
+#define MPP34_TDM1_RXQ        MPP(34, 0x6, 0, 1, 1)
+#define MPP34_UNUSED        MPP(34, 0x3, 0, 0, 1)
+
+
+
+#define MPP35_GPIO        MPP(35, 0x1, 1, 1, 1)
+#define MPP35_UA2_RDX        MPP(35, 0x4, 1, 0, 1)
+#define MPP35_TDM1_TXQ        MPP(35, 0x6, 0, 1, 1)
+#define MPP35_UNUSED        MPP(35, 0x3, 0, 0, 1)
+
+#define MPP36_GPIO        MPP(36, 0x1, 1, 1, 1)
+#define MPP36_UA0_CTSn        MPP(36, 0x2, 1, 0, 1)
+#define MPP36_UA2_TDX        MPP(36, 0x4, 0, 1, 1)
+#define MPP36_TDM0_SCSn        MPP(36, 0x6, 0, 1, 1)
+#define MPP36_UNUSED        MPP(36, 0x3, 0, 0, 1)
+
+
+#define MPP37_GPIO        MPP(37, 0x1, 1, 1, 1)
+#define MPP37_UA0_RTSn        MPP(37, 0x2, 0, 1, 1)
+#define MPP37_UA2_RXD        MPP(37, 0x4, 1, 0, 1)
+#define MPP37_SYSRST_OUTn    MPP(37, 0x5, 0, 1, 1)
+#define MPP37_TDM_SCLK        MPP(37, 0x6, 0, 1, 1)
+#define MPP37_UNUSED        MPP(37, 0x3, 0, 0, 1)
+
+
+
+
+#define MPP38_GPIO        MPP(38, 0x1, 1, 1, 1)
+#define MPP38_UA1_CTSn        MPP(38, 0x2, 1, 0, 1)
+#define MPP38_UA3_TXD        MPP(38, 0x4, 0, 1, 1)
+#define MPP38_SYSRST_OUTn    MPP(38, 0x5, 0, 1, 1)
+#define MPP38_TDM_SMOSI        MPP(38, 0x6, 0, 1, 1)
+#define MPP38_UNUSED        MPP(38, 0x3, 0, 0, 1)
+
+
+
+
+#define MPP39_GPIO        MPP(39, 0x1, 1, 1, 1)
+#define MPP39_UA1_RTSn        MPP(39, 0x2, 0, 1, 1)
+#define MPP39_UA3_RXD        MPP(39, 0x4, 1, 0, 1)
+#define MPP39_SYSRST_OUTn    MPP(39, 0x5, 0, 1, 1)
+#define MPP39_TDM_SMISO        MPP(39, 0x6, 1, 0, 1)
+#define MPP39_UNUSED        MPP(39, 0x3, 0, 0, 1)
+
+
+
+#define MPP40_GPIO        MPP(40, 0x1, 1, 1, 1)
+#define MPP40_TDM_INTn        MPP(40, 0x6, 1, 0, 1)
+#define MPP40_UNUSED        MPP(40, 0x0, 0, 0, 1)
+
+
+
+#define MPP41_GPIO        MPP(41, 0x1, 1, 1, 1)
+#define MPP41_TDM_RSTn        MPP(41, 0x6, 0, 1, 1)
+#define MPP41_UNUSED        MPP(41, 0x0, 0, 0, 1)
+
+
+
+#define MPP42_GPIO        MPP(42, 0x1, 1, 1, 1)
+#define MPP42_TDM_PCLK        MPP(42, 0x6, 1, 1, 1)
+#define MPP42_UNUSED        MPP(42, 0x0, 0, 0, 1)
+
+
+
+#define MPP43_GPIO        MPP(43, 0x1, 1, 1, 1)
+#define MPP43_TDM_FSYNC        MPP(43, 0x6, 1, 1, 1)
+#define MPP43_UNUSED        MPP(43, 0x0, 0, 0, 1)
+
+
+
+#define MPP44_GPIO        MPP(44, 0x1, 1, 1, 1)
+#define MPP44_TDM_DRX        MPP(44, 0x6, 1, 0, 1)
+#define MPP44_UNUSED        MPP(44, 0x0, 0, 0, 1)
+
+
+
+#define MPP45_GPIO        MPP(45, 0x1, 1, 1, 1)
+#define MPP45_SATA0_ACTn    MPP(45, 0x3, 0, 1, 1)
+#define MPP45_TDM_DRX        MPP(45, 0x6, 0, 1, 1)
+#define MPP45_UNUSED        MPP(45, 0x0, 0, 0, 1)
+
+
+#define MPP46_GPIO        MPP(46, 0x1, 1, 1, 1)
+#define MPP46_TDM_SCSn        MPP(46, 0x6, 0, 1, 1)
+#define MPP46_UNUSED        MPP(46, 0x0, 0, 0, 1)
+
+
+#define MPP47_GPIO        MPP(47, 0x1, 1, 1, 1)
+#define MPP47_UNUSED        MPP(47, 0x0, 0, 0, 1)
+
+
+
+#define MPP48_GPIO        MPP(48, 0x1, 1, 1, 1)
+#define MPP48_SATA1_ACTn    MPP(48, 0x3, 0, 1, 1)
+#define MPP48_UNUSED        MPP(48, 0x2, 0, 0, 1)
+
+
+
+#define MPP49_GPIO        MPP(49, 0x1, 1, 1, 1)
+#define MPP49_SATA0_ACTn    MPP(49, 0x3, 0, 1, 1)
+#define MPP49_M_BB        MPP(49, 0x4, 1, 0, 1)
+#define MPP49_UNUSED        MPP(49, 0x2, 0, 0, 1)
+
+
+#define MPP_MAX            49
+
+void mv78xx0_mpp_conf(unsigned int *mpp_list);
+
+#endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
index 7f86fe0..fc2ddf8 100644
--- a/arch/arm/mach-mx1/Makefile
+++ b/arch/arm/mach-mx1/Makefile
@@ -4,11 +4,12 @@
 
 # Object file lists.
 
+EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
 obj-y			+= generic.o clock.o devices.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO)	+= ksym_mx1.o mx1_camera_fiq.o
 
 # Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mach-mx1ads.c
similarity index 95%
rename from arch/arm/mach-mx1/mx1ads.c
rename to arch/arm/mach-mx1/mach-mx1ads.c
index 30f04e5..51f3cfd 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mach-mx1ads.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-imx/mx1ads.c
+ * arch/arm/mach-imx/mach-mx1ads.c
  *
  * Initially based on:
  *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
@@ -27,7 +27,7 @@
 #include <mach/hardware.h>
 #include <mach/i2c.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx1.h>
 #include <mach/irqs.h>
 
 #include "devices.h"
@@ -147,7 +147,7 @@
 	/* Maintainer: Sascha Hauer, Pengutronix */
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
@@ -157,7 +157,7 @@
 MACHINE_START(MXLADS, "Freescale MXLADS")
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/mach-scb9328.c
similarity index 97%
rename from arch/arm/mach-mx1/scb9328.c
rename to arch/arm/mach-mx1/mach-scb9328.c
index 325d98d..7587a7a 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/mach-scb9328.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-mx1/scb9328.c
+ * linux/arch/arm/mach-mx1/mach-scb9328.c
  *
  * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
  * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
@@ -23,7 +23,7 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx1.h>
 
 #include "devices.h"
 
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index b96c6a3..742fd4e 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -37,6 +37,7 @@
 config MACH_PCM038
 	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 	depends on MACH_MX27
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 	  includes specific configurations for the module and its peripherals.
@@ -55,7 +56,7 @@
 
 endchoice
 
-config MACH_EUKREA_CPUIMX27
+config MACH_CPUIMX27
 	bool "Eukrea CPUIMX27 module"
 	depends on MACH_MX27
 	help
@@ -64,14 +65,14 @@
 
 config MACH_EUKREA_CPUIMX27_USESDHC2
 	bool "CPUIMX27 integrates SDHC2 module"
-	depends on MACH_EUKREA_CPUIMX27
+	depends on MACH_CPUIMX27
 	help
 	  This adds support for the internal SDHC2 used on CPUIMX27 used
 	  for wifi or eMMC.
 
 choice
 	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX27
+	depends on MACH_CPUIMX27
 	default MACH_EUKREA_MBIMX27_BASEBOARD
 
 config MACH_EUKREA_MBIMX27_BASEBOARD
@@ -90,7 +91,7 @@
 	  Include support for MX27PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_MX27LITE
+config MACH_IMX27LITE
 	bool "LogicPD MX27 LITEKIT platform"
 	depends on MACH_MX27
 	help
@@ -100,6 +101,7 @@
 config MACH_PCA100
 	bool "Phytec phyCARD-s (pca100)"
 	depends on MACH_MX27
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for phyCARD-s (aka pca100) platform. This
 	  includes specific configurations for the module and its peripherals.
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 52aca0aa..e3254fa 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -4,21 +4,20 @@
 
 # Object file lists.
 
-obj-y	:=  generic.o devices.o serial.o
+obj-y	:=  devices.o serial.o
 
-obj-$(CONFIG_MACH_MX21) += clock_imx21.o
+obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
 
 obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
-obj-$(CONFIG_MACH_MX27) += clock_imx27.o
+obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
 
-obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
-obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += pcm038.o
+obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
-obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
-obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
+obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
-obj-$(CONFIG_MACH_PCA100) += pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
-
+obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index e82b489..bb419ef 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -23,11 +23,242 @@
 #include <linux/module.h>
 
 #include <mach/clock.h>
+#include <mach/hardware.h>
 #include <mach/common.h>
 #include <asm/clkdev.h>
 #include <asm/div64.h>
 
-#include "crm_regs.h"
+#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_PRESC_OFFSET	29
+#define CCM_CSCR_PRESC_MASK	(0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET	26
+#define CCM_CSCR_USB_MASK	(0x7 << CCM_CSCR_USB_OFFSET)
+#define CCM_CSCR_SD_OFFSET	24
+#define CCM_CSCR_SD_MASK	(0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES	(1 << 22)
+#define CCM_CSCR_MPLLRES	(1 << 21)
+#define CCM_CSCR_SSI2_OFFSET	20
+#define CCM_CSCR_SSI2		(1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET	19
+#define CCM_CSCR_SSI1		(1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET	18
+#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
+#define CCM_CSCR_SP		(1 << 17)
+#define CCM_CSCR_MCU		(1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK	(0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET	9
+#define CCM_CSCR_IPDIV		(1 << CCM_CSCR_IPDIV_OFFSET)
+
+#define CCM_CSCR_OSC26MDIV	(1 << 4)
+#define CCM_CSCR_OSC26M		(1 << 3)
+#define CCM_CSCR_FPM		(1 << 2)
+#define CCM_CSCR_SPEN		(1 << 1)
+#define CCM_CSCR_MPEN		1
+
+#define CCM_MPCTL0_CPLM		(1 << 31)
+#define CCM_MPCTL0_PD_OFFSET	26
+#define CCM_MPCTL0_PD_MASK	(0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET	16
+#define CCM_MPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET	10
+#define CCM_MPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET	0
+#define CCM_MPCTL0_MFN_MASK	0x3ff
+
+#define CCM_MPCTL1_LF		(1 << 15)
+#define CCM_MPCTL1_BRMO		(1 << 6)
+
+#define CCM_SPCTL0_CPLM		(1 << 31)
+#define CCM_SPCTL0_PD_OFFSET	26
+#define CCM_SPCTL0_PD_MASK	(0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET	16
+#define CCM_SPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET	10
+#define CCM_SPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET	0
+#define CCM_SPCTL0_MFN_MASK	0x3ff
+
+#define CCM_SPCTL1_LF		(1 << 15)
+#define CCM_SPCTL1_BRMO		(1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET	16
+#define CCM_OSC26MCTL_PEAK_MASK		(0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET	8
+#define CCM_OSC26MCTL_AGC_MASK		(0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET	0
+#define CCM_OSC26MCTL_ANATEST_MASK	0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET	26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK	(0x3f << 26)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET	16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK	(0x3f << 16)
+#define CCM_PCDR0_NFCDIV_OFFSET		12
+#define CCM_PCDR0_NFCDIV_MASK		(0xf << 12)
+#define CCM_PCDR0_48MDIV_OFFSET		5
+#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET	0
+#define CCM_PCDR0_FIRIDIV_MASK		0x1f
+#define CCM_PCDR1_PERDIV4_OFFSET	24
+#define CCM_PCDR1_PERDIV4_MASK		(0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET	16
+#define CCM_PCDR1_PERDIV3_MASK		(0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET	8
+#define CCM_PCDR1_PERDIV2_MASK		(0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET	0
+#define CCM_PCDR1_PERDIV1_MASK		0x3f
+
+#define CCM_PCCR_HCLK_CSI_OFFSET	31
+#define CCM_PCCR_HCLK_CSI_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET	30
+#define CCM_PCCR_HCLK_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET	28
+#define CCM_PCCR_HCLK_BROM_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET	27
+#define CCM_PCCR_HCLK_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET	26
+#define CCM_PCCR_HCLK_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET	25
+#define CCM_PCCR_HCLK_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET	24
+#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET	23
+#define CCM_PCCR_BMI_MASK		(1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG		CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET		22
+#define CCM_PCCR_PERCLK4_REG		CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET		21
+#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET	20
+#define CCM_PCCR_FIRI_BAUD_MASK		(1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET		19
+#define CCM_PCCR_NFC_REG		CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET		18
+#define CCM_PCCR_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET	17
+#define CCM_PCCR_SSI1_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET	16
+#define CCM_PCCR_SSI2_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET		15
+#define CCM_PCCR_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET		14
+#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET		13
+#define CCM_PCCR_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET		12
+#define CCM_PCCR_I2C1_REG		CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET		11
+#define CCM_PCCR_GPIO_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET		10
+#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET		9
+#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET		8
+#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET	7
+#define CCM_PCCR_SSI2_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET	6
+#define CCM_PCCR_SSI1_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET		5
+#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET		4
+#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET		3
+#define CCM_PCCR_UART4_REG		CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET		2
+#define CCM_PCCR_UART3_REG		CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET		1
+#define CCM_PCCR_UART2_REG		CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET		0
+#define CCM_PCCR_UART1_REG		CCM_PCCR0
+
+#define CCM_PCCR_OWIRE_OFFSET		31
+#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET		30
+#define CCM_PCCR_KPP_REG		CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET		29
+#define CCM_PCCR_RTC_REG		CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET		28
+#define CCM_PCCR_PWM_REG		CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET		27
+#define CCM_PCCR_GPT3_REG		CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET		26
+#define CCM_PCCR_GPT2_REG		CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET		25
+#define CCM_PCCR_GPT1_REG		CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET		24
+#define CCM_PCCR_WDT_REG		CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET		23
+#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK		(1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK		(1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK		(1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK		(1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK		(1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK		(1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK		(1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK		(1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK		(1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK		(1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK		(1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK		(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK		(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK		(1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK		(1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK		(1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK		(1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK		(1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK		(1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK		(1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK		(1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK		(1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK		(1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK		(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK		(1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK		(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK		(1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK		(1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK		(1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK		(1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK		(1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK		(1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK		(1 << CCM_PCCR_WDT_OFFSET)
+
+#define CCM_CCSR_32KSR		(1 << 15)
+
+#define CCM_CCSR_CLKMODE1	(1 << 9)
+#define CCM_CCSR_CLKMODE0	(1 << 8)
+
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK	0x1f
+
+#define SYS_FMCR		0x14	/* Functional Muxing Control Reg */
+#define SYS_CHIP_ID		0x00	/* The offset of CHIP ID register */
 
 static int _clk_enable(struct clk *clk)
 {
@@ -1002,6 +1233,7 @@
 	clk_enable(&uart_clk[0]);
 #endif
 
-	mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+	mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+			MX21_INT_GPT1);
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 18c53a6..0f0823c 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -29,21 +29,23 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 
+#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
 /* Register offsets */
-#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
 
 #define CCM_CSCR_UPDATE_DIS	(1 << 31)
 #define CCM_CSCR_SSI2		(1 << 23)
@@ -753,7 +755,8 @@
 	clk_enable(&uart1_clk);
 #endif
 
-	mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+	mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+			MX27_INT_GPT1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index d9e3bf9..d8d3b2d 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -39,7 +39,8 @@
 	 * the silicon revision very early we read it here to
 	 * avoid any further hooks
 	*/
-	val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
+	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+				+ SYS_CHIP_ID));
 
 	cpu_silicon_rev = (int)(val >> 28);
 	cpu_partnumber = (int)((val >> 12) & 0xFFFF);
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
deleted file mode 100644
index 749de76..0000000
--- a/arch/arm/mach-mx2/crm_regs.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-
-#include <mach/hardware.h>
-
-/* Register offsets */
-#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
-
-#define CCM_CSCR_PRESC_OFFSET   29
-#define CCM_CSCR_PRESC_MASK     (0x7 << CCM_CSCR_PRESC_OFFSET)
-
-#define CCM_CSCR_USB_OFFSET     26
-#define CCM_CSCR_USB_MASK       (0x7 << CCM_CSCR_USB_OFFSET)
-#define CCM_CSCR_SD_OFFSET      24
-#define CCM_CSCR_SD_MASK        (0x3 << CCM_CSCR_SD_OFFSET)
-#define CCM_CSCR_SPLLRES        (1 << 22)
-#define CCM_CSCR_MPLLRES        (1 << 21)
-#define CCM_CSCR_SSI2_OFFSET    20
-#define CCM_CSCR_SSI2           (1 << CCM_CSCR_SSI2_OFFSET)
-#define CCM_CSCR_SSI1_OFFSET    19
-#define CCM_CSCR_SSI1           (1 << CCM_CSCR_SSI1_OFFSET)
-#define CCM_CSCR_FIR_OFFSET    	18
-#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
-#define CCM_CSCR_SP             (1 << 17)
-#define CCM_CSCR_MCU            (1 << 16)
-#define CCM_CSCR_BCLK_OFFSET	10
-#define CCM_CSCR_BCLK_MASK      (0xf << CCM_CSCR_BCLK_OFFSET)
-#define CCM_CSCR_IPDIV_OFFSET   9
-#define CCM_CSCR_IPDIV          (1 << CCM_CSCR_IPDIV_OFFSET)
-
-#define CCM_CSCR_OSC26MDIV      (1 << 4)
-#define CCM_CSCR_OSC26M         (1 << 3)
-#define CCM_CSCR_FPM            (1 << 2)
-#define CCM_CSCR_SPEN           (1 << 1)
-#define CCM_CSCR_MPEN           1
-
-
-
-#define CCM_MPCTL0_CPLM         (1 << 31)
-#define CCM_MPCTL0_PD_OFFSET    26
-#define CCM_MPCTL0_PD_MASK      (0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET   16
-#define CCM_MPCTL0_MFD_MASK     (0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET   10
-#define CCM_MPCTL0_MFI_MASK     (0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET   0
-#define CCM_MPCTL0_MFN_MASK     0x3ff
-
-#define CCM_MPCTL1_LF           (1 << 15)
-#define CCM_MPCTL1_BRMO         (1 << 6)
-
-#define CCM_SPCTL0_CPLM         (1 << 31)
-#define CCM_SPCTL0_PD_OFFSET    26
-#define CCM_SPCTL0_PD_MASK      (0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET   16
-#define CCM_SPCTL0_MFD_MASK     (0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET   10
-#define CCM_SPCTL0_MFI_MASK     (0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET   0
-#define CCM_SPCTL0_MFN_MASK     0x3ff
-
-#define CCM_SPCTL1_LF           (1 << 15)
-#define CCM_SPCTL1_BRMO         (1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET       16
-#define CCM_OSC26MCTL_PEAK_MASK         (0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET        8
-#define CCM_OSC26MCTL_AGC_MASK          (0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET    0
-#define CCM_OSC26MCTL_ANATEST_MASK      0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET    26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK      (0x3f << 26)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET    16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK      (0x3f << 16)
-#define CCM_PCDR0_NFCDIV_OFFSET         12
-#define CCM_PCDR0_NFCDIV_MASK           (0xf << 12)
-#define CCM_PCDR0_48MDIV_OFFSET		5
-#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
-#define CCM_PCDR0_FIRIDIV_OFFSET	0
-#define CCM_PCDR0_FIRIDIV_MASK		0x1f
-#define CCM_PCDR1_PERDIV4_OFFSET        24
-#define CCM_PCDR1_PERDIV4_MASK          (0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET        16
-#define CCM_PCDR1_PERDIV3_MASK          (0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET        8
-#define CCM_PCDR1_PERDIV2_MASK          (0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET        0
-#define CCM_PCDR1_PERDIV1_MASK          0x3f
-
-#define CCM_PCCR_HCLK_CSI_OFFSET       	31
-#define CCM_PCCR_HCLK_CSI_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_DMA_OFFSET       	30
-#define CCM_PCCR_HCLK_DMA_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_BROM_OFFSET      	28
-#define CCM_PCCR_HCLK_BROM_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_EMMA_OFFSET      	27
-#define CCM_PCCR_HCLK_EMMA_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_LCDC_OFFSET      	26
-#define CCM_PCCR_HCLK_LCDC_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_SLCDC_OFFSET     	25
-#define CCM_PCCR_HCLK_SLCDC_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_USBOTG_OFFSET    	24
-#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
-#define CCM_PCCR_HCLK_BMI_OFFSET    	23
-#define CCM_PCCR_BMI_MASK          	(1 << CCM_PCCR_BMI_MASK)
-#define CCM_PCCR_HCLK_BMI_REG	    	CCM_PCCR0
-#define CCM_PCCR_PERCLK4_OFFSET        	22
-#define CCM_PCCR_PERCLK4_REG	    	CCM_PCCR0
-#define CCM_PCCR_SLCDC_OFFSET          	21
-#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_BAUD_OFFSET       20
-#define CCM_PCCR_FIRI_BAUD_MASK         (1 << CCM_PCCR_FIRI_BAUD_MASK)
-#define CCM_PCCR_FIRI_BAUD_REG	        CCM_PCCR0
-#define CCM_PCCR_NFC_OFFSET		19
-#define CCM_PCCR_NFC_REG		CCM_PCCR0
-#define CCM_PCCR_LCDC_OFFSET           	18
-#define CCM_PCCR_LCDC_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_BAUD_OFFSET      	17
-#define CCM_PCCR_SSI1_BAUD_REG	    	CCM_PCCR0
-#define CCM_PCCR_SSI2_BAUD_OFFSET      	16
-#define CCM_PCCR_SSI2_BAUD_REG	    	CCM_PCCR0
-#define CCM_PCCR_EMMA_OFFSET           	15
-#define CCM_PCCR_EMMA_REG		CCM_PCCR0
-#define CCM_PCCR_USBOTG_OFFSET         	14
-#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
-#define CCM_PCCR_DMA_OFFSET            	13
-#define CCM_PCCR_DMA_REG            	CCM_PCCR0
-#define CCM_PCCR_I2C1_OFFSET           	12
-#define CCM_PCCR_I2C1_REG		CCM_PCCR0
-#define CCM_PCCR_GPIO_OFFSET           	11
-#define CCM_PCCR_GPIO_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC2_OFFSET          	10
-#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC1_OFFSET          	9
-#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_OFFSET		8
-#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
-#define CCM_PCCR_FIRI_REG		CCM_PCCR0
-#define CCM_PCCR_SSI2_IPG_OFFSET       	7
-#define CCM_PCCR_SSI2_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_IPG_OFFSET       	6
-#define CCM_PCCR_SSI1_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI2_OFFSET		5
-#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI1_OFFSET		4
-#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
-#define CCM_PCCR_UART4_OFFSET          	3
-#define CCM_PCCR_UART4_REG		CCM_PCCR0
-#define CCM_PCCR_UART3_OFFSET          	2
-#define CCM_PCCR_UART3_REG		CCM_PCCR0
-#define CCM_PCCR_UART2_OFFSET          	1
-#define CCM_PCCR_UART2_REG		CCM_PCCR0
-#define CCM_PCCR_UART1_OFFSET          	0
-#define CCM_PCCR_UART1_REG		CCM_PCCR0
-
-#define CCM_PCCR_OWIRE_OFFSET          	31
-#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
-#define CCM_PCCR_KPP_OFFSET            	30
-#define CCM_PCCR_KPP_REG		CCM_PCCR1
-#define CCM_PCCR_RTC_OFFSET            	29
-#define CCM_PCCR_RTC_REG		CCM_PCCR1
-#define CCM_PCCR_PWM_OFFSET            	28
-#define CCM_PCCR_PWM_REG		CCM_PCCR1
-#define CCM_PCCR_GPT3_OFFSET           	27
-#define CCM_PCCR_GPT3_REG		CCM_PCCR1
-#define CCM_PCCR_GPT2_OFFSET           	26
-#define CCM_PCCR_GPT2_REG		CCM_PCCR1
-#define CCM_PCCR_GPT1_OFFSET           	25
-#define CCM_PCCR_GPT1_REG		CCM_PCCR1
-#define CCM_PCCR_WDT_OFFSET            	24
-#define CCM_PCCR_WDT_REG		CCM_PCCR1
-#define CCM_PCCR_CSPI3_OFFSET		23
-#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
-
-#define CCM_PCCR_CSPI1_MASK            	(1 << CCM_PCCR_CSPI1_OFFSET)
-#define CCM_PCCR_CSPI2_MASK            	(1 << CCM_PCCR_CSPI2_OFFSET)
-#define CCM_PCCR_CSPI3_MASK            	(1 << CCM_PCCR_CSPI3_OFFSET)
-#define CCM_PCCR_DMA_MASK              	(1 << CCM_PCCR_DMA_OFFSET)
-#define CCM_PCCR_EMMA_MASK             	(1 << CCM_PCCR_EMMA_OFFSET)
-#define CCM_PCCR_GPIO_MASK             	(1 << CCM_PCCR_GPIO_OFFSET)
-#define CCM_PCCR_GPT1_MASK             	(1 << CCM_PCCR_GPT1_OFFSET)
-#define CCM_PCCR_GPT2_MASK             	(1 << CCM_PCCR_GPT2_OFFSET)
-#define CCM_PCCR_GPT3_MASK             	(1 << CCM_PCCR_GPT3_OFFSET)
-#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
-#define CCM_PCCR_HCLK_CSI_MASK         	(1 << CCM_PCCR_HCLK_CSI_OFFSET)
-#define CCM_PCCR_HCLK_DMA_MASK         	(1 << CCM_PCCR_HCLK_DMA_OFFSET)
-#define CCM_PCCR_HCLK_EMMA_MASK        	(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
-#define CCM_PCCR_HCLK_LCDC_MASK        	(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
-#define CCM_PCCR_HCLK_SLCDC_MASK       	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
-#define CCM_PCCR_HCLK_USBOTG_MASK      	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
-#define CCM_PCCR_I2C1_MASK             	(1 << CCM_PCCR_I2C1_OFFSET)
-#define CCM_PCCR_KPP_MASK              	(1 << CCM_PCCR_KPP_OFFSET)
-#define CCM_PCCR_LCDC_MASK             	(1 << CCM_PCCR_LCDC_OFFSET)
-#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
-#define CCM_PCCR_OWIRE_MASK            	(1 << CCM_PCCR_OWIRE_OFFSET)
-#define CCM_PCCR_PERCLK4_MASK          	(1 << CCM_PCCR_PERCLK4_OFFSET)
-#define CCM_PCCR_PWM_MASK              	(1 << CCM_PCCR_PWM_OFFSET)
-#define CCM_PCCR_RTC_MASK              	(1 << CCM_PCCR_RTC_OFFSET)
-#define CCM_PCCR_SDHC1_MASK            	(1 << CCM_PCCR_SDHC1_OFFSET)
-#define CCM_PCCR_SDHC2_MASK            	(1 << CCM_PCCR_SDHC2_OFFSET)
-#define CCM_PCCR_SLCDC_MASK            	(1 << CCM_PCCR_SLCDC_OFFSET)
-#define CCM_PCCR_SSI1_BAUD_MASK        	(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
-#define CCM_PCCR_SSI1_IPG_MASK         	(1 << CCM_PCCR_SSI1_IPG_OFFSET)
-#define CCM_PCCR_SSI2_BAUD_MASK        	(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
-#define CCM_PCCR_SSI2_IPG_MASK         	(1 << CCM_PCCR_SSI2_IPG_OFFSET)
-#define CCM_PCCR_UART1_MASK            	(1 << CCM_PCCR_UART1_OFFSET)
-#define CCM_PCCR_UART2_MASK            	(1 << CCM_PCCR_UART2_OFFSET)
-#define CCM_PCCR_UART3_MASK            	(1 << CCM_PCCR_UART3_OFFSET)
-#define CCM_PCCR_UART4_MASK            	(1 << CCM_PCCR_UART4_OFFSET)
-#define CCM_PCCR_USBOTG_MASK           	(1 << CCM_PCCR_USBOTG_OFFSET)
-#define CCM_PCCR_WDT_MASK              	(1 << CCM_PCCR_WDT_OFFSET)
-
-
-#define CCM_CCSR_32KSR          (1 << 15)
-
-#define CCM_CCSR_CLKMODE1       (1 << 9)
-#define CCM_CCSR_CLKMODE0       (1 << 8)
-
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK   0x1f
-
-#define SYS_FMCR                0x14	/*  Functional Muxing Control Reg */
-#define SYS_CHIP_ID             0x00	/* The offset of CHIP ID register */
-
-#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 3956d82..b91e412 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -47,65 +47,31 @@
  * - i.MX21: 2 channel
  * - i.MX27: 3 channel
  */
-static struct resource mxc_spi_resources0[] = {
-	{
-	       .start = CSPI1_BASE_ADDR,
-	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = MXC_INT_CSPI1,
-	       .end = MXC_INT_CSPI1,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
+#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq)					\
+	static struct resource mxc_spi_resources ## n[] = {			\
+		{								\
+			.start = baseaddr,					\
+			.end = baseaddr + SZ_4K - 1,				\
+			.flags = IORESOURCE_MEM,				\
+		}, {								\
+			.start = irq,						\
+			.end = irq,						\
+			.flags = IORESOURCE_IRQ,				\
+		},								\
+	};									\
+										\
+	struct platform_device mxc_spi_device ## n = {				\
+		.name = "spi_imx",						\
+		.id = n,							\
+		.num_resources = ARRAY_SIZE(mxc_spi_resources ## n),		\
+		.resource = mxc_spi_resources ## n,				\
+	}
 
-static struct resource mxc_spi_resources1[] = {
-	{
-		.start = CSPI2_BASE_ADDR,
-		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI2,
-		.end = MXC_INT_CSPI2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
+DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1);
+DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2);
 
 #ifdef CONFIG_MACH_MX27
-static struct resource mxc_spi_resources2[] = {
-	{
-		.start = CSPI3_BASE_ADDR,
-		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI3,
-		.end = MXC_INT_CSPI3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-#endif
-
-struct platform_device mxc_spi_device0 = {
-	.name = "spi_imx",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
-	.resource = mxc_spi_resources0,
-};
-
-struct platform_device mxc_spi_device1 = {
-	.name = "spi_imx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
-	.resource = mxc_spi_resources1,
-};
-
-#ifdef CONFIG_MACH_MX27
-struct platform_device mxc_spi_device2 = {
-	.name = "spi_imx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
-	.resource = mxc_spi_resources2,
-};
+DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3);
 #endif
 
 /*
@@ -113,104 +79,34 @@
  * - i.MX21: 3 timers
  * - i.MX27: 6 timers
  */
-
-/* We use gpt0 as system timer, so do not add a device for this one */
-
-static struct resource timer1_resources[] = {
-	{
-		.start	= GPT2_BASE_ADDR,
-		.end	= GPT2_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT2,
-		.end     = MXC_INT_GPT2,
-		.flags   = IORESOURCE_IRQ,
+#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq)				\
+	static struct resource timer ## n ##_resources[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		}							\
+	};								\
+									\
+	struct platform_device mxc_gpt ## n = {				\
+		.name = "imx_gpt",					\
+		.id = n,						\
+		.num_resources = ARRAY_SIZE(timer ## n ## _resources),	\
+		.resource = timer ## n ## _resources,			\
 	}
-};
 
-struct platform_device mxc_gpt1 = {
-	.name = "imx_gpt",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(timer1_resources),
-	.resource = timer1_resources,
-};
-
-static struct resource timer2_resources[] = {
-	{
-		.start	= GPT3_BASE_ADDR,
-		.end	= GPT3_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT3,
-		.end     = MXC_INT_GPT3,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_gpt2 = {
-	.name = "imx_gpt",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(timer2_resources),
-	.resource = timer2_resources,
-};
+/* We use gpt1 as system timer, so do not add a device for this one */
+DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
+DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
 
 #ifdef CONFIG_MACH_MX27
-static struct resource timer3_resources[] = {
-	{
-		.start	= GPT4_BASE_ADDR,
-		.end	= GPT4_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT4,
-		.end     = MXC_INT_GPT4,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_gpt3 = {
-	.name = "imx_gpt",
-	.id = 3,
-	.num_resources = ARRAY_SIZE(timer3_resources),
-	.resource = timer3_resources,
-};
-
-static struct resource timer4_resources[] = {
-	{
-		.start	= GPT5_BASE_ADDR,
-		.end	= GPT5_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT5,
-		.end     = MXC_INT_GPT5,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_gpt4 = {
-	.name = "imx_gpt",
-	.id = 4,
-	.num_resources = ARRAY_SIZE(timer4_resources),
-	.resource = timer4_resources,
-};
-
-static struct resource timer5_resources[] = {
-	{
-		.start	= GPT6_BASE_ADDR,
-		.end	= GPT6_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT6,
-		.end     = MXC_INT_GPT6,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_gpt5 = {
-	.name = "imx_gpt",
-	.id = 5,
-	.num_resources = ARRAY_SIZE(timer5_resources),
-	.resource = timer5_resources,
-};
+DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
+DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
+DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
 #endif
 
 /*
@@ -221,9 +117,9 @@
  */
 static struct resource mxc_wdt_resources[] = {
 	{
-		.start	= WDOG_BASE_ADDR,
-		.end	= WDOG_BASE_ADDR + 0x30,
-		.flags	= IORESOURCE_MEM,
+		.start = MX2x_WDOG_BASE_ADDR,
+		.end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
 	},
 };
 
@@ -236,8 +132,8 @@
 
 static struct resource mxc_w1_master_resources[] = {
 	{
-		.start = OWIRE_BASE_ADDR,
-		.end   = OWIRE_BASE_ADDR + SZ_4K - 1,
+		.start = MX2x_OWIRE_BASE_ADDR,
+		.end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 };
@@ -249,24 +145,33 @@
 	.resource = mxc_w1_master_resources,
 };
 
-static struct resource mxc_nand_resources[] = {
-	{
-		.start	= NFC_BASE_ADDR,
-		.end	= NFC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_NANDFC,
-		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
+#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq)			\
+	static struct resource pfx ## _nand_resources[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		},							\
+	};								\
+									\
+	struct platform_device pfx ## _nand_device = {			\
+		.name = "mxc_nand",					\
+		.id = 0,						\
+		.num_resources = ARRAY_SIZE(pfx ## _nand_resources),	\
+		.resource = pfx ## _nand_resources,			\
+	}
 
-struct platform_device mxc_nand_device = {
-	.name = "mxc_nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_nand_resources),
-	.resource = mxc_nand_resources,
-};
+#ifdef CONFIG_MACH_MX21
+DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC);
+#endif
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC);
+#endif
 
 /*
  * lcdc:
@@ -276,12 +181,12 @@
  */
 static struct resource mxc_fb[] = {
 	{
-		.start = LCDC_BASE_ADDR,
-		.end   = LCDC_BASE_ADDR + 0xFFF,
+		.start = MX2x_LCDC_BASE_ADDR,
+		.end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_LCDC,
-		.end   = MXC_INT_LCDC,
+		.start = MX2x_INT_LCDC,
+		.end = MX2x_INT_LCDC,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -300,13 +205,13 @@
 #ifdef CONFIG_MACH_MX27
 static struct resource mxc_fec_resources[] = {
 	{
-		.start	= FEC_BASE_ADDR,
-		.end	= FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
+		.start = MX27_FEC_BASE_ADDR,
+		.end = MX27_FEC_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
 	}, {
-		.start	= MXC_INT_FEC,
-		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ,
+		.start = MX27_INT_FEC,
+		.end = MX27_INT_FEC,
+		.flags = IORESOURCE_IRQ,
 	},
 };
 
@@ -318,55 +223,41 @@
 };
 #endif
 
-static struct resource mxc_i2c_1_resources[] = {
-	{
-		.start	= I2C_BASE_ADDR,
-		.end	= I2C_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_I2C,
-		.end	= MXC_INT_I2C,
-		.flags	= IORESOURCE_IRQ,
+#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq)				\
+	static struct resource mxc_i2c_resources ## n[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		}							\
+	};								\
+									\
+	struct platform_device mxc_i2c_device ## n = {			\
+		.name = "imx-i2c",					\
+		.id = n,						\
+		.num_resources = ARRAY_SIZE(mxc_i2c_resources ## n),	\
+		.resource = mxc_i2c_resources ## n,			\
 	}
-};
 
-struct platform_device mxc_i2c_device0 = {
-	.name = "imx-i2c",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-	.resource = mxc_i2c_1_resources,
-};
+DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C);
 
 #ifdef CONFIG_MACH_MX27
-static struct resource mxc_i2c_2_resources[] = {
-	{
-		.start	= I2C2_BASE_ADDR,
-		.end	= I2C2_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_I2C2,
-		.end	= MXC_INT_I2C2,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_i2c_device1 = {
-	.name = "imx-i2c",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-	.resource = mxc_i2c_2_resources,
-};
+DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2);
 #endif
 
 static struct resource mxc_pwm_resources[] = {
 	{
-		.start	= PWM_BASE_ADDR,
-		.end	= PWM_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM,
+		.start = MX2x_PWM_BASE_ADDR,
+		.end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
 	}, {
-		.start   = MXC_INT_PWM,
-		.end     = MXC_INT_PWM,
-		.flags   = IORESOURCE_IRQ,
+		.start = MX2x_INT_PWM,
+		.end = MX2x_INT_PWM,
+		.flags = IORESOURCE_IRQ,
 	}
 };
 
@@ -377,77 +268,49 @@
 	.resource = mxc_pwm_resources,
 };
 
-/*
- * Resource definition for the MXC SDHC
- */
-static struct resource mxc_sdhc1_resources[] = {
-	{
-		.start = SDHC1_BASE_ADDR,
-		.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_SDHC1,
-		.end   = MXC_INT_SDHC1,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start  = DMA_REQ_SDHC1,
-		.end    = DMA_REQ_SDHC1,
-		.flags  = IORESOURCE_DMA,
-	},
-};
+#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq)			\
+	static struct resource mxc_sdhc_resources ## n[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		}, {							\
+			.start = dmareq,				\
+			.end = dmareq,					\
+			.flags = IORESOURCE_DMA,			\
+		},							\
+	};								\
+									\
+	static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32);	\
+									\
+	struct platform_device mxc_sdhc_device ## n = {			\
+		.name = "mxc-mmc",					\
+		.id = n,						\
+		.dev = {						\
+			.dma_mask = &mxc_sdhc ## n ## _dmamask,		\
+			.coherent_dma_mask = DMA_BIT_MASK(32),		\
+		},							\
+		.num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n),	\
+		.resource = mxc_sdhc_resources ## n,		\
+	}
 
-static u64 mxc_sdhc1_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device mxc_sdhc_device0 = {
-	.name           = "mxc-mmc",
-	.id             = 0,
-	.dev            = {
-		.dma_mask = &mxc_sdhc1_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources  = ARRAY_SIZE(mxc_sdhc1_resources),
-	.resource       = mxc_sdhc1_resources,
-};
-
-static struct resource mxc_sdhc2_resources[] = {
-	{
-		.start = SDHC2_BASE_ADDR,
-		.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_SDHC2,
-		.end   = MXC_INT_SDHC2,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start  = DMA_REQ_SDHC2,
-		.end    = DMA_REQ_SDHC2,
-		.flags  = IORESOURCE_DMA,
-	},
-};
-
-static u64 mxc_sdhc2_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device mxc_sdhc_device1 = {
-	.name           = "mxc-mmc",
-	.id             = 1,
-	.dev            = {
-		.dma_mask = &mxc_sdhc2_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources  = ARRAY_SIZE(mxc_sdhc2_resources),
-	.resource       = mxc_sdhc2_resources,
-};
+DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
+DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
 
 #ifdef CONFIG_MACH_MX27
 static struct resource otg_resources[] = {
 	{
-		.start	= OTG_BASE_ADDR,
-		.end	= OTG_BASE_ADDR + 0x1ff,
-		.flags	= IORESOURCE_MEM,
+		.start = MX27_USBOTG_BASE_ADDR,
+		.end = MX27_USBOTG_BASE_ADDR + 0x1ff,
+		.flags = IORESOURCE_MEM,
 	}, {
-		.start	= MXC_INT_USB3,
-		.end	= MXC_INT_USB3,
-		.flags	= IORESOURCE_IRQ,
+		.start = MX27_INT_USB3,
+		.end = MX27_INT_USB3,
+		.flags = IORESOURCE_IRQ,
 	},
 };
 
@@ -483,12 +346,12 @@
 
 static struct resource mxc_usbh1_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x200,
-		.end = OTG_BASE_ADDR + 0x3ff,
+		.start = MX27_USBOTG_BASE_ADDR + 0x200,
+		.end = MX27_USBOTG_BASE_ADDR + 0x3ff,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_USB1,
-		.end = MXC_INT_USB1,
+		.start = MX27_INT_USB1,
+		.end = MX27_INT_USB1,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -509,12 +372,12 @@
 
 static struct resource mxc_usbh2_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x400,
-		.end = OTG_BASE_ADDR + 0x5ff,
+		.start = MX27_USBOTG_BASE_ADDR + 0x400,
+		.end = MX27_USBOTG_BASE_ADDR + 0x5ff,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_USB2,
-		.end = MXC_INT_USB2,
+		.start = MX27_INT_USB2,
+		.end = MX27_INT_USB2,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -531,129 +394,102 @@
 };
 #endif
 
-static struct resource imx_ssi_resources0[] = {
-	{
-		.start	= SSI1_BASE_ADDR,
-		.end	= SSI1_BASE_ADDR + 0x6F,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_SSI1,
-		.end	= MXC_INT_SSI1,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.name	= "tx0",
-		.start	= DMA_REQ_SSI1_TX0,
-		.end	= DMA_REQ_SSI1_TX0,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "rx0",
-		.start	= DMA_REQ_SSI1_RX0,
-		.end	= DMA_REQ_SSI1_RX0,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "tx1",
-		.start	= DMA_REQ_SSI1_TX1,
-		.end	= DMA_REQ_SSI1_TX1,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "rx1",
-		.start	= DMA_REQ_SSI1_RX1,
-		.end	= DMA_REQ_SSI1_RX1,
-		.flags	= IORESOURCE_DMA,
-	},
-};
+#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix)			\
+	{								\
+		.name = _name,						\
+		.start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,	\
+		.end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,		\
+		.flags = IORESOURCE_DMA,				\
+	}
 
-static struct resource imx_ssi_resources1[] = {
-	{
-		.start	= SSI2_BASE_ADDR,
-		.end	= SSI2_BASE_ADDR + 0x6F,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_SSI2,
-		.end	= MXC_INT_SSI2,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.name	= "tx0",
-		.start	= DMA_REQ_SSI2_TX0,
-		.end	= DMA_REQ_SSI2_TX0,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "rx0",
-		.start	= DMA_REQ_SSI2_RX0,
-		.end	= DMA_REQ_SSI2_RX0,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "tx1",
-		.start	= DMA_REQ_SSI2_TX1,
-		.end	= DMA_REQ_SSI2_TX1,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "rx1",
-		.start	= DMA_REQ_SSI2_RX1,
-		.end	= DMA_REQ_SSI2_RX1,
-		.flags	= IORESOURCE_DMA,
-	},
-};
+#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq)			\
+	static struct resource imx_ssi_resources ## n[] = {		\
+		{							\
+			.start = MX2x_SSI ## ssin ## _BASE_ADDR,	\
+			.end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f,	\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = MX2x_INT_SSI1,				\
+			.end = MX2x_INT_SSI1,				\
+			.flags = IORESOURCE_IRQ,			\
+		},							\
+		DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0),		\
+		DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0),		\
+		DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1),		\
+		DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1),		\
+	};								\
+									\
+	struct platform_device imx_ssi_device ## n = {			\
+		.name = "imx-ssi",					\
+		.id = n,						\
+		.num_resources = ARRAY_SIZE(imx_ssi_resources ## n),	\
+		.resource = imx_ssi_resources ## n,			\
+	}
 
-struct platform_device imx_ssi_device0 = {
-	.name = "imx-ssi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
-	.resource = imx_ssi_resources0,
-};
-
-struct platform_device imx_ssi_device1 = {
-	.name = "imx-ssi",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
-	.resource = imx_ssi_resources1,
-};
+DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
+DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
 
 /* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.irq = MXC_INT_GPIO,
-		.base = IO_ADDRESS(GPIO_BASE_ADDR),
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	}, {
-		.chip.label = "gpio-1",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	}, {
-		.chip.label = "gpio-2",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	}, {
-		.chip.label = "gpio-3",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	}, {
-		.chip.label = "gpio-4",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
-	}, {
-		.chip.label = "gpio-5",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
+#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq)				\
+	{								\
+		.chip.label = "gpio-" #n,				\
+		.irq = _irq,						\
+		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
+				n * 0x100),				\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
 	}
-};
+
+#define DEFINE_MXC_GPIO_PORT(SOC, n)					\
+	{								\
+		.chip.label = "gpio-" #n,				\
+		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
+				n * 0x100),				\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
+	}
+
+#define DEFINE_MXC_GPIO_PORTS(SOC, pfx)					\
+	static struct mxc_gpio_port pfx ## _gpio_ports[] = {		\
+		DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO),	\
+		DEFINE_MXC_GPIO_PORT(SOC, 1),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 2),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 3),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 4),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 5),				\
+	}
+
+#ifdef CONFIG_MACH_MX21
+DEFINE_MXC_GPIO_PORTS(MX21, imx21);
+#endif
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_MXC_GPIO_PORTS(MX27, imx27);
+#endif
 
 int __init mxc_register_gpios(void)
 {
-	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21())
+		return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+	else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
+	else
+#endif
+		return 0;
 }
 
 #ifdef CONFIG_MACH_MX21
 static struct resource mx21_usbhc_resources[] = {
 	{
-		.start	= USBOTG_BASE_ADDR,
-		.end	= USBOTG_BASE_ADDR + 0x1FFF,
+		.start	= MX21_BASE_ADDR,
+		.end	= MX21_BASE_ADDR + 0x1FFF,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start		= MXC_INT_USBHOST,
-		.end		= MXC_INT_USBHOST,
+		.start		= MX21_INT_USBHOST,
+		.end		= MX21_INT_USBHOST,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index f12694b..84ed513 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -1,8 +1,10 @@
 extern struct platform_device mxc_gpt1;
 extern struct platform_device mxc_gpt2;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_gpt3;
 extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
+#endif
 extern struct platform_device mxc_wdt;
 extern struct platform_device mxc_uart_device0;
 extern struct platform_device mxc_uart_device1;
@@ -11,12 +13,19 @@
 extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_uart_device5;
 extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_nand_device;
+#ifdef CONFIG_MACH_MX21
+extern struct platform_device imx21_nand_device;
+#endif
+#ifdef CONFIG_MACH_MX27
+extern struct platform_device imx27_nand_device;
+#endif
 extern struct platform_device mxc_fb_device;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxc_pwm_device;
 extern struct platform_device mxc_i2c_device0;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_i2c_device1;
+#endif
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
@@ -25,7 +34,9 @@
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_spi_device2;
+#endif
 extern struct platform_device mx21_usbhc_device;
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
index 7382b6d..f3b169d5 100644
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -28,7 +28,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/mach-cpuimx27.c
similarity index 91%
rename from arch/arm/mach-mx2/eukrea_cpuimx27.c
rename to arch/arm/mach-mx2/mach-cpuimx27.c
index 7b18760..1f616dca 100644
--- a/arch/arm/mach-mx2/eukrea_cpuimx27.c
+++ b/arch/arm/mach-mx2/mach-cpuimx27.c
@@ -36,7 +36,7 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
 
@@ -142,28 +142,28 @@
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
 		.irq = IRQ_GPIOB(23),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
 		.irq = IRQ_GPIOB(22),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
 		.irq = IRQ_GPIOB(27),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
 		.irq = IRQ_GPIOB(30),
 		.uartclk = 14745600,
 		.regshift = 1,
@@ -189,7 +189,8 @@
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 
-	mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+	mxc_register_device(&imx27_nand_device,
+			&eukrea_cpuimx27_nand_board_info);
 
 	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
@@ -224,9 +225,9 @@
 };
 
 MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = eukrea_cpuimx27_init,
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mach-imx27lite.c
similarity index 93%
rename from arch/arm/mach-mx2/mx27lite.c
rename to arch/arm/mach-mx2/mach-imx27lite.c
index 82ea227..b5710bf 100644
--- a/arch/arm/mach-mx2/mx27lite.c
+++ b/arch/arm/mach-mx2/mach-imx27lite.c
@@ -27,7 +27,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/board-mx27lite.h>
 
 #include "devices.h"
@@ -85,9 +85,9 @@
 };
 
 MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27lite_init,
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mach-mx21ads.c
similarity index 94%
rename from arch/arm/mach-mx2/mx21ads.c
rename to arch/arm/mach-mx2/mach-mx21ads.c
index cf5f77c..113e58d 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mach-mx21ads.c
@@ -30,7 +30,7 @@
 #include <asm/mach/map.h>
 #include <mach/imx-uart.h>
 #include <mach/imxfb.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx21.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
 #include <mach/board-mx21ads.h>
@@ -118,8 +118,8 @@
 };
 
 static struct resource mx21ads_flash_resource = {
-	.start = CS0_BASE_ADDR,
-	.end = CS0_BASE_ADDR + 0x02000000 - 1,
+	.start = MX21_CS0_BASE_ADDR,
+	.end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -242,7 +242,7 @@
 	 */
 	{
 		.virtual = MX21ADS_MMIO_BASE_ADDR,
-		.pfn = __phys_to_pfn(CS1_BASE_ADDR),
+		.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
 		.length = MX21ADS_MMIO_SIZE,
 		.type = MT_DEVICE,
 	},
@@ -268,7 +268,7 @@
 	mxc_register_device(&mxc_uart_device3, &uart_pdata);
 	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
-	mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+	mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
@@ -284,9 +284,9 @@
 
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX21_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX21_PHYS_OFFSET + 0x100,
 	.map_io         = mx21ads_map_io,
 	.init_irq       = mx21_init_irq,
 	.init_machine   = mx21ads_board_init,
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mach-mx27_3ds.c
similarity index 92%
rename from arch/arm/mach-mx2/mx27pdk.c
rename to arch/arm/mach-mx2/mach-mx27_3ds.c
index 6761d1b..b2f4e0d 100644
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ b/arch/arm/mach-mx2/mach-mx27_3ds.c
@@ -26,7 +26,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/board-mx27pdk.h>
 
 #include "devices.h"
@@ -85,9 +85,9 @@
 
 MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27pdk_init,
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mach-mx27ads.c
similarity index 96%
rename from arch/arm/mach-mx2/mx27ads.c
rename to arch/arm/mach-mx2/mach-mx27ads.c
index 83e412b..6ce3236 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mach-mx27ads.c
@@ -33,7 +33,7 @@
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/board-mx27ads.h>
 #include <mach/mxc_nand.h>
 #include <mach/i2c.h>
@@ -290,7 +290,7 @@
 	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
 	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
 	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
-	mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+	mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, mx27ads_i2c_devices,
@@ -320,7 +320,7 @@
 static struct map_desc mx27ads_io_desc[] __initdata = {
 	{
 		.virtual = PBC_BASE_ADDRESS,
-		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
+		.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
 		.length = SZ_1M,
 		.type = MT_DEVICE,
 	},
@@ -334,9 +334,9 @@
 
 MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27ads_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27ads_board_init,
diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mach-mxt_td60.c
similarity index 96%
rename from arch/arm/mach-mx2/mxt_td60.c
rename to arch/arm/mach-mx2/mach-mxt_td60.c
index 8bcc1a5..bc38559 100644
--- a/arch/arm/mach-mx2/mxt_td60.c
+++ b/arch/arm/mach-mx2/mach-mxt_td60.c
@@ -33,7 +33,7 @@
 #include <asm/mach/map.h>
 #include <linux/gpio.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
 #include <mach/i2c.h>
 #include <linux/i2c/pca953x.h>
@@ -257,7 +257,7 @@
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
+	mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
 
 	i2c_register_board_info(0, mxt_td60_i2c_devices,
 				ARRAY_SIZE(mxt_td60_i2c_devices));
@@ -284,9 +284,9 @@
 
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	/* maintainer: Maxtrack Industrial */
-	.phys_io	= AIPI_BASE_ADDR,
-	.io_pg_offst	= ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.phys_io	= MX27_AIPI_BASE_ADDR,
+	.io_pg_offst	= ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= MX27_PHYS_OFFSET + 0x100,
 	.map_io		= mx27_map_io,
 	.init_irq	= mx27_init_irq,
 	.init_machine	= mxt_td60_board_init,
diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-mx2/mach-pca100.c
new file mode 100644
index 0000000..778fff2
--- /dev/null
+++ b/arch/arm/mach-mx2/mach-pca100.c
@@ -0,0 +1,395 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx27.h>
+#include <mach/i2c.h>
+#include <asm/mach/time.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/imx-uart.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices.h"
+
+#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
+#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
+
+static int pca100_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* SDHC */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* onboard I2C */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* external I2C */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+	/* OTG */
+	OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+	PC7_PF_USBOTG_DATA5,
+	PC8_PF_USBOTG_DATA6,
+	PC9_PF_USBOTG_DATA0,
+	PC10_PF_USBOTG_DATA2,
+	PC11_PF_USBOTG_DATA1,
+	PC12_PF_USBOTG_DATA4,
+	PC13_PF_USBOTG_DATA3,
+	PE0_PF_USBOTG_NXT,
+	PE1_PF_USBOTG_STP,
+	PE2_PF_USBOTG_DIR,
+	PE24_PF_USBOTG_CLK,
+	PE25_PF_USBOTG_DATA7,
+	/* USBH2 */
+	USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data pca100_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_w1_master_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data pca100_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4a),
+		.type = "lm75"
+	}
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+	.name		= "at25320an",
+	.byte_len	= 4096,
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+	{
+		.modalias = "at25",
+		.max_speed_hz = 30000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &at25320,
+	},
+};
+
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+
+static struct spi_imx_master pca100_spi_0_data = {
+	.chipselect	= pca100_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
+	gpio_set_value(GPIO_PORTC + 20, 1);
+	udelay(2);
+	gpio_set_value(GPIO_PORTC + 20, 0);
+	mxc_gpio_mode(PC20_PF_SSI1_FS);
+	msleep(2);
+}
+
+static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);  /* FS */
+	gpio_set_value(GPIO_PORTC + 20, 0);
+	mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT);  /* TX */
+	gpio_set_value(GPIO_PORTC + 22, 0);
+	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT);  /* reset */
+	gpio_set_value(GPIO_PORTC + 28, 0);
+	udelay(10);
+	gpio_set_value(GPIO_PORTC + 28, 1);
+	mxc_gpio_mode(PC20_PF_SSI1_FS);
+	mxc_gpio_mode(PC22_PF_SSI1_TXD);
+	msleep(2);
+}
+
+static struct imx_ssi_platform_data pca100_ssi_pdata = {
+	.ac97_reset		= pca100_ac97_cold_reset,
+	.ac97_warm_reset	= pca100_ac97_warm_reset,
+	.flags			= IMX_SSI_USE_AC97,
+};
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOC(29), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "imx-mmc-detect", data);
+	if (ret)
+		printk(KERN_ERR
+			"pca100: Failed to reuest irq for sd/mmc detection\n");
+
+	return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.init = pca100_sdhc2_init,
+	.exit = pca100_sdhc2_exit,
+};
+
+static int otg_phy_init(struct platform_device *pdev)
+{
+	gpio_set_value(OTG_PHY_CS_GPIO, 0);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data otg_pdata = {
+	.init	= otg_phy_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static int usbh2_phy_init(struct platform_device *pdev)
+{
+	gpio_set_value(USBH2_PHY_CS_GPIO, 0);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= usbh2_phy_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pca100_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", pca100_otg_mode);
+
+static void __init pca100_init(void)
+{
+	int ret;
+
+	/* SSI unit */
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+				  MXC_AUDMUX_V1_PCR_TFCSEL(3) |
+				  MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
+				  MXC_AUDMUX_V1_PCR_RXDSEL(3));
+	mxc_audmux_v1_configure_port(3,
+				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+				  MXC_AUDMUX_V1_PCR_TFCSEL(0) |
+				  MXC_AUDMUX_V1_PCR_TFSDIR |
+				  MXC_AUDMUX_V1_PCR_RXDSEL(0));
+
+	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+			ARRAY_SIZE(pca100_pins), "PCA100");
+	if (ret)
+		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+	mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+	mxc_register_device(&imx27_nand_device, &pca100_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, pca100_i2c_devices,
+				ARRAY_SIZE(pca100_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
+
+	/* GPIO0_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
+	/* GPIO1_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
+	/* GPIO2_IRQ */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	spi_register_board_info(pca100_spi_board_info,
+				ARRAY_SIZE(pca100_spi_board_info));
+	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+#endif
+
+	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
+	gpio_direction_output(OTG_PHY_CS_GPIO, 1);
+	gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
+	gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host) {
+		gpio_set_value(OTG_PHY_CS_GPIO, 0);
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+	}
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+	.init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = pca100_init,
+	.timer          = &pca100_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/mach-pcm038.c
similarity index 89%
rename from arch/arm/mach-mx2/pcm038.c
rename to arch/arm/mach-mx2/mach-pcm038.c
index 906d59b..035fbe0 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/mach-pcm038.c
@@ -36,10 +36,12 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
 #include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
@@ -96,6 +98,19 @@
 	PC17_PF_SSI4_RXD,
 	PC18_PF_SSI4_TXD,
 	PC19_PF_SSI4_CLK,
+	/* USB host */
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
 };
 
 /*
@@ -108,8 +123,8 @@
 };
 
 static struct resource pcm038_sram_resource = {
-	.start = CS1_BASE_ADDR,
-	.end   = CS1_BASE_ADDR + 512 * 1024 - 1,
+	.start = MX27_CS1_BASE_ADDR,
+	.end   = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -173,9 +188,7 @@
  * setup other stuffs to access the sram. */
 static void __init pcm038_init_sram(void)
 {
-	__raw_writel(0x0000d843, CSCR_U(1));
-	__raw_writel(0x22252521, CSCR_L(1));
-	__raw_writel(0x22220a00, CSCR_A(1));
+	mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
 }
 
 static struct imxi2c_platform_data pcm038_i2c_1_data = {
@@ -279,6 +292,11 @@
 	}
 };
 
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
 static void __init pcm038_init(void)
 {
 	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -291,7 +309,7 @@
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
 
 	mxc_gpio_mode(PE16_AF_OWIRE);
-	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
+	mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pcm038_i2c_devices,
@@ -311,6 +329,8 @@
 	spi_register_board_info(pcm038_spi_board_info,
 				ARRAY_SIZE(pcm038_spi_board_info));
 
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
@@ -328,9 +348,9 @@
 };
 
 MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = pcm038_init,
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/mm-imx21.c
similarity index 66%
copy from arch/arm/mach-mx2/generic.c
copy to arch/arm/mach-mx2/mm-imx21.c
index ae8f75913..6413431 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/mm-imx21.c
@@ -1,5 +1,5 @@
 /*
- * generic.c
+ * arch/arm/mach-mx2/mm-imx21.c
  *
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  *
@@ -25,8 +25,8 @@
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
-/* MX27 memory map definition */
-static struct map_desc mxc_io_desc[] __initdata = {
+/* MX21 memory map definition */
+static struct map_desc imx21_io_desc[] __initdata = {
 	/*
 	 * this fixed mapping covers:
 	 * - AIPI1
@@ -36,9 +36,9 @@
 	 * - and some reserved space
 	 */
 	{
-		.virtual = AIPI_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPI_BASE_ADDR),
-		.length = AIPI_SIZE,
+		.virtual = MX21_AIPI_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR),
+		.length = MX21_AIPI_SIZE,
 		.type = MT_DEVICE
 	},
 	/*
@@ -47,9 +47,9 @@
 	 * - ATA
 	 */
 	{
-		.virtual = SAHB1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SAHB1_BASE_ADDR),
-		.length = SAHB1_SIZE,
+		.virtual = MX21_SAHB1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR),
+		.length = MX21_SAHB1_SIZE,
 		.type = MT_DEVICE
 	},
 	/*
@@ -57,11 +57,11 @@
 	 * - EMI
 	 */
 	{
-		.virtual = X_MEMC_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
-		.length = X_MEMC_SIZE,
+		.virtual = MX21_X_MEMC_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR),
+		.length = MX21_X_MEMC_SIZE,
 		.type = MT_DEVICE
-	}
+	},
 };
 
 /*
@@ -72,26 +72,12 @@
 void __init mx21_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX21);
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+	mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
 
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
-}
-
-void __init mx27_map_io(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX27);
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
-
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
-}
-
-void __init mx27_init_irq(void)
-{
-	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+	iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
 }
 
 void __init mx21_init_irq(void)
 {
-	mx27_init_irq();
+	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
 }
-
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/mm-imx27.c
similarity index 67%
rename from arch/arm/mach-mx2/generic.c
rename to arch/arm/mach-mx2/mm-imx27.c
index ae8f75913..3366ed4 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/mm-imx27.c
@@ -1,5 +1,5 @@
 /*
- * generic.c
+ * arch/arm/mach-mx2/mm-imx27.c
  *
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  *
@@ -26,7 +26,7 @@
 #include <asm/mach/map.h>
 
 /* MX27 memory map definition */
-static struct map_desc mxc_io_desc[] __initdata = {
+static struct map_desc imx27_io_desc[] __initdata = {
 	/*
 	 * this fixed mapping covers:
 	 * - AIPI1
@@ -36,9 +36,9 @@
 	 * - and some reserved space
 	 */
 	{
-		.virtual = AIPI_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPI_BASE_ADDR),
-		.length = AIPI_SIZE,
+		.virtual = MX27_AIPI_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR),
+		.length = MX27_AIPI_SIZE,
 		.type = MT_DEVICE
 	},
 	/*
@@ -47,9 +47,9 @@
 	 * - ATA
 	 */
 	{
-		.virtual = SAHB1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SAHB1_BASE_ADDR),
-		.length = SAHB1_SIZE,
+		.virtual = MX27_SAHB1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR),
+		.length = MX27_SAHB1_SIZE,
 		.type = MT_DEVICE
 	},
 	/*
@@ -57,11 +57,11 @@
 	 * - EMI
 	 */
 	{
-		.virtual = X_MEMC_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
-		.length = X_MEMC_SIZE,
+		.virtual = MX27_X_MEMC_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR),
+		.length = MX27_X_MEMC_SIZE,
 		.type = MT_DEVICE
-	}
+	},
 };
 
 /*
@@ -69,29 +69,15 @@
  * system startup to create static physical to virtual
  * memory map for the IO modules.
  */
-void __init mx21_map_io(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX21);
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
-
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
-}
-
 void __init mx27_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX27);
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+	mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
 
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+	iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
 }
 
 void __init mx27_init_irq(void)
 {
-	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
 }
-
-void __init mx21_init_irq(void)
-{
-	mx27_init_irq();
-}
-
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
deleted file mode 100644
index aea3d34..0000000
--- a/arch/arm/mach-mx2/pca100.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux.h>
-#include <mach/i2c.h>
-#include <asm/mach/time.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
-#include <mach/imx-uart.h>
-#include <mach/mxc_nand.h>
-#include <mach/irqs.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-static int pca100_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* SDHC */
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* SSI1 */
-	PC20_PF_SSI1_FS,
-	PC21_PF_SSI1_RXD,
-	PC22_PF_SSI1_TXD,
-	PC23_PF_SSI1_CLK,
-	/* onboard I2C */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* external I2C */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* SPI1 */
-	PD25_PF_CSPI1_RDY,
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct mxc_nand_platform_data pca100_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_w1_master_device,
-	&mxc_fec_device,
-};
-
-static struct imxi2c_platform_data pca100_i2c_1_data = {
-	.bitrate = 100000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pca100_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4a),
-		.type = "lm75"
-	}
-};
-
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-static struct spi_eeprom at25320 = {
-	.name		= "at25320an",
-	.byte_len	= 4096,
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static struct spi_board_info pca100_spi_board_info[] __initdata = {
-	{
-		.modalias = "at25",
-		.max_speed_hz = 30000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.platform_data = &at25320,
-	},
-};
-
-static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
-
-static struct spi_imx_master pca100_spi_0_data = {
-	.chipselect	= pca100_spi_cs,
-	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
-};
-#endif
-
-static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = request_irq(IRQ_GPIOC(29), detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "imx-mmc-detect", data);
-	if (ret)
-		printk(KERN_ERR
-			"pca100: Failed to reuest irq for sd/mmc detection\n");
-
-	return ret;
-}
-
-static void pca100_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOC(29), data);
-}
-
-static struct imxmmc_platform_data sdhc_pdata = {
-	.init = pca100_sdhc2_init,
-	.exit = pca100_sdhc2_exit,
-};
-
-static void __init pca100_init(void)
-{
-	int ret;
-
-	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
-			ARRAY_SIZE(pca100_pins), "PCA100");
-	if (ret)
-		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
-	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
-
-	mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
-
-	/* only the i2c master 1 is used on this CPU card */
-	i2c_register_board_info(1, pca100_i2c_devices,
-				ARRAY_SIZE(pca100_i2c_devices));
-
-	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
-
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
-
-	/* GPIO0_IRQ */
-	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
-	/* GPIO1_IRQ */
-	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
-	/* GPIO2_IRQ */
-	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
-
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-	spi_register_board_info(pca100_spi_board_info,
-				ARRAY_SIZE(pca100_spi_board_info));
-	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
-#endif
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init pca100_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer pca100_timer = {
-	.init = pca100_timer_init,
-};
-
-MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = pca100_init,
-	.timer          = &pca100_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 3cb7f45..4aafd5b 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -24,7 +24,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
@@ -190,8 +190,8 @@
 
 static struct resource pcm970_sja1000_resources[] = {
 	{
-		.start   = CS4_BASE_ADDR,
-		.end     = CS4_BASE_ADDR + 0x100 - 1,
+		.start   = MX27_CS4_BASE_ADDR,
+		.end     = MX27_CS4_BASE_ADDR + 0x100 - 1,
 		.flags   = IORESOURCE_MEM,
 	}, {
 		.start   = IRQ_GPIOE(19),
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 40a485c..1c0c835 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -26,12 +26,12 @@
 
 static struct resource uart0[] = {
 	{
-		.start = UART1_BASE_ADDR,
-		.end = UART1_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART1_BASE_ADDR,
+		.end = MX2x_UART1_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART1,
-		.end = MXC_INT_UART1,
+		.start = MX2x_INT_UART1,
+		.end = MX2x_INT_UART1,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -45,12 +45,12 @@
 
 static struct resource uart1[] = {
 	{
-		.start = UART2_BASE_ADDR,
-		.end = UART2_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART2_BASE_ADDR,
+		.end = MX2x_UART2_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART2,
-		.end = MXC_INT_UART2,
+		.start = MX2x_INT_UART2,
+		.end = MX2x_INT_UART2,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -64,12 +64,12 @@
 
 static struct resource uart2[] = {
 	{
-		.start = UART3_BASE_ADDR,
-		.end = UART3_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART3_BASE_ADDR,
+		.end = MX2x_UART3_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART3,
-		.end = MXC_INT_UART3,
+		.start = MX2x_INT_UART3,
+		.end = MX2x_INT_UART3,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -83,12 +83,12 @@
 
 static struct resource uart3[] = {
 	{
-		.start = UART4_BASE_ADDR,
-		.end = UART4_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART4_BASE_ADDR,
+		.end = MX2x_UART4_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART4,
-		.end = MXC_INT_UART4,
+		.start = MX2x_INT_UART4,
+		.end = MX2x_INT_UART4,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -103,12 +103,12 @@
 #ifdef CONFIG_MACH_MX27
 static struct resource uart4[] = {
 	{
-		.start = UART5_BASE_ADDR,
-		.end = UART5_BASE_ADDR + 0x0B5,
+		.start = MX27_UART5_BASE_ADDR,
+		.end = MX27_UART5_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART5,
-		.end = MXC_INT_UART5,
+		.start = MX27_INT_UART5,
+		.end = MX27_INT_UART5,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -122,12 +122,12 @@
 
 static struct resource uart5[] = {
 	{
-		.start = UART6_BASE_ADDR,
-		.end = UART6_BASE_ADDR + 0x0B5,
+		.start = MX27_UART6_BASE_ADDR,
+		.end = MX27_UART6_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART6,
-		.end = MXC_INT_UART6,
+		.start = MX27_INT_UART6,
+		.end = MX27_INT_UART6,
 		.flags = IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index cc28f56..54d2173 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -3,7 +3,6 @@
 comment "MX25 platforms:"
 
 config MACH_MX25_3DS
-	select ARCH_MXC_IOMUX_V3
 	bool "Support MX25PDK (3DS) Platform"
 
 endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index fe23836..10cebc5 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,3 +1,3 @@
 obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
-obj-$(CONFIG_MACH_MX25_3DS)	+= mx25pdk.o
+obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25pdk.o
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 37e1359..1550149 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -124,6 +124,11 @@
 	return get_rate_per(5);
 }
 
+static unsigned long get_rate_lcdc(struct clk *clk)
+{
+	return get_rate_per(7);
+}
+
 static unsigned long get_rate_otg(struct clk *clk)
 {
 	return 48000000; /* FIXME */
@@ -167,6 +172,8 @@
 DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
+DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL,	 NULL, NULL);
+DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0,  7, NULL,	 NULL, &lcdc_ahb_clk);
 DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
 DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
 DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
@@ -182,6 +189,8 @@
 DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
 DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
+DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1,  8, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(lcdc_clk,	 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -214,6 +223,8 @@
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 };
 
 int __init mx25_clocks_init(void)
@@ -228,6 +239,9 @@
 	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
 	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
 
+	/* Clock source for lcdc is upll */
+	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64);
+
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
 	return 0;
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 9fdeea1..3f4b8a0 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -438,3 +438,65 @@
 	.num_resources	= ARRAY_SIZE(mx25_fec_resources),
 	.resource	= mx25_fec_resources,
 };
+
+static struct resource mxc_nand_resources[] = {
+	{
+		.start	= MX25_NFC_BASE_ADDR,
+		.end	= MX25_NFC_BASE_ADDR + 0x1fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_NANDFC,
+		.end	= MX25_INT_NANDFC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_nand_device = {
+	.name		= "mxc_nand",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mxc_nand_resources),
+	.resource	= mxc_nand_resources,
+};
+
+static struct resource mx25_rtc_resources[] = {
+	{
+		.start	= MX25_DRYICE_BASE_ADDR,
+		.end	= MX25_DRYICE_BASE_ADDR + 0x40,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_DRYICE,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mx25_rtc_device = {
+	.name	= "imxdi_rtc",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(mx25_rtc_resources),
+	.resource	= mx25_rtc_resources,
+};
+
+static struct resource mx25_fb_resources[] = {
+	{
+		.start	= MX25_LCDC_BASE_ADDR,
+		.end	= MX25_LCDC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_LCDC,
+		.end	= MX25_INT_LCDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx25_fb_device = {
+	.name		= "imx-fb",
+	.id		= 0,
+	.resource	= mx25_fb_resources,
+	.num_resources	= ARRAY_SIZE(mx25_fb_resources),
+	.dev		= {
+		.coherent_dma_mask = 0xFFFFFFFF,
+	},
+};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index fe5420f..39560e1 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -18,3 +18,6 @@
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx25_fec_device;
+extern struct platform_device mxc_nand_device;
+extern struct platform_device mx25_rtc_device;
+extern struct platform_device mx25_fb_device;
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mach-mx25pdk.c
similarity index 68%
rename from arch/arm/mach-mx25/mx25pdk.c
rename to arch/arm/mach-mx25/mach-mx25pdk.c
index 6f06089..83d7410 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mach-mx25pdk.c
@@ -35,8 +35,9 @@
 #include <mach/imx-uart.h>
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
+#include <mach/imxfb.h>
 #include "devices.h"
-#include <mach/iomux.h>
+#include <mach/iomux-mx25.h>
 
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
@@ -54,6 +55,31 @@
 	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
 	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
 	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+
+	/* LCD */
+	MX25_PAD_LD0__LD0,
+	MX25_PAD_LD1__LD1,
+	MX25_PAD_LD2__LD2,
+	MX25_PAD_LD3__LD3,
+	MX25_PAD_LD4__LD4,
+	MX25_PAD_LD5__LD5,
+	MX25_PAD_LD6__LD6,
+	MX25_PAD_LD7__LD7,
+	MX25_PAD_LD8__LD8,
+	MX25_PAD_LD9__LD9,
+	MX25_PAD_LD10__LD10,
+	MX25_PAD_LD11__LD11,
+	MX25_PAD_LD12__LD12,
+	MX25_PAD_LD13__LD13,
+	MX25_PAD_LD14__LD14,
+	MX25_PAD_LD15__LD15,
+	MX25_PAD_GPIO_E__LD16,
+	MX25_PAD_GPIO_F__LD17,
+	MX25_PAD_HSYNC__HSYNC,
+	MX25_PAD_VSYNC__VSYNC,
+	MX25_PAD_LSCLK__LSCLK,
+	MX25_PAD_OE_ACD__OE_ACD,
+	MX25_PAD_CONTRAST__CONTRAST,
 };
 
 static struct fec_platform_data mx25_fec_pdata = {
@@ -77,6 +103,40 @@
 	gpio_set_value(FEC_RESET_B_GPIO, 1);
 }
 
+static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static struct imx_fb_videomode mx25pdk_modes[] = {
+	{
+		.mode	= {
+			.name		= "CRT-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 39683,
+			.left_margin	= 45,
+			.right_margin	= 114,
+			.upper_margin	= 33,
+			.lower_margin	= 11,
+			.hsync_len	= 1,
+			.vsync_len	= 1,
+		},
+		.bpp	= 16,
+		.pcr	= 0xFA208B80,
+	},
+};
+
+static struct imx_fb_platform_data mx25pdk_fb_pdata = {
+	.mode		= mx25pdk_modes,
+	.num_modes	= ARRAY_SIZE(mx25pdk_modes),
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
 static void __init mx25pdk_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
@@ -84,6 +144,9 @@
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
+	mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
+	mxc_register_device(&mx25_rtc_device, NULL);
+	mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
 
 	mx25pdk_fec_reset();
 	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
@@ -102,7 +165,7 @@
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.phys_io	= MX25_AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.boot_params    = MX25_PHYS_OFFSET + 0x100,
 	.map_io         = mx25_map_io,
 	.init_irq       = mx25_init_irq,
 	.init_machine   = mx25pdk_init,
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 2829441..3872af1 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -34,6 +34,7 @@
 config MACH_PCM037
 	bool "Support Phytec pcm037 (i.MX31) platforms"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -86,6 +87,7 @@
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
 	select ARCH_MX35
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm043 platform. This includes
 	  specific configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 93c7b29..5d650fd 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -5,18 +5,22 @@
 # Object file lists.
 
 obj-y				:= mm.o devices.o cpu.o
-obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
+CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_ARCH_MX31)		+= clock-imx31.o iomux-imx31.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
-obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
-obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
-				   mx31moboard-marxbot.o
-obj-$(CONFIG_MACH_QONG)		+= qong.o
-obj-$(CONFIG_MACH_PCM043)	+= pcm043.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)	+= mx35pdk.o
-obj-$(CONFIG_MACH_KZM_ARM11_01)	+= kzmarm11.o
+obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY)	+= mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE)	+= mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037)	+= mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)	+= mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS)	+= mach-mx31_3ds.o
+CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
+				   mx31moboard-marxbot.o mx31moboard-smartbot.o
+obj-$(CONFIG_MACH_QONG)		+= mach-qong.o
+obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock-imx31.c
similarity index 98%
rename from arch/arm/mach-mx3/clock.c
rename to arch/arm/mach-mx3/clock-imx31.c
index b5c39a0..80dba99 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock-imx31.c
@@ -616,14 +616,15 @@
 
 	mx31_read_cpu_rev();
 
-	if (mx31_revision() >= CHIP_REV_2_0) {
+	if (mx31_revision() >= MX31_CHIP_REV_2_0) {
 		reg = __raw_readl(MXC_CCM_PMCR1);
 		/* No PLL restart on DVFS switch; enable auto EMI handshake */
 		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
 		__raw_writel(reg, MXC_CCM_PMCR1);
 	}
 
-	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+	mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+			MX31_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index f3f41fa..9f3e943e 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -28,7 +28,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 
-#define CCM_BASE	IO_ADDRESS(CCM_BASE_ADDR)
+#define CCM_BASE	MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)
 
 #define CCM_CCMR        0x00
 #define CCM_PDR0        0x04
@@ -502,7 +502,8 @@
 	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
 	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
-	mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+	mxc_timer_init(&gpt_clk,
+			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
index db82880..861afe0 100644
--- a/arch/arm/mach-mx3/cpu.c
+++ b/arch/arm/mach-mx3/cpu.c
@@ -41,7 +41,7 @@
 	u32 i, srev;
 
 	/* read SREV register from IIM module */
-	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
 		if (srev == mx31_cpu_type[i].srev) {
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
index adfa362..37a8a07 100644
--- a/arch/arm/mach-mx3/crm_regs.h
+++ b/arch/arm/mach-mx3/crm_regs.h
@@ -24,7 +24,7 @@
 #define CKIH_CLK_FREQ_27MHZ     27000000
 #define CKIL_CLK_FREQ           32768
 
-#define MXC_CCM_BASE		IO_ADDRESS(CCM_BASE_ADDR)
+#define MXC_CCM_BASE		MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR)
 
 /* Register addresses */
 #define MXC_CCM_CCMR		(MXC_CCM_BASE + 0x00)
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux-imx31.c
similarity index 98%
rename from arch/arm/mach-mx3/iomux.c
rename to arch/arm/mach-mx3/iomux-imx31.c
index c66ccbc..a1d7fa5 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux-imx31.c
@@ -29,7 +29,7 @@
 /*
  * IOMUX register (base) addresses
  */
-#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+#define IOMUX_BASE	MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
 #define IOMUXINT_OBS1	(IOMUX_BASE + 0x000)
 #define IOMUXINT_OBS2	(IOMUX_BASE + 0x004)
 #define IOMUXGPR	(IOMUX_BASE + 0x008)
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
similarity index 97%
rename from arch/arm/mach-mx3/armadillo5x0.c
rename to arch/arm/mach-mx3/mach-armadillo5x0.c
index 54aab40..3d72b0b 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -182,8 +182,8 @@
 
 static struct resource armadillo5x0_nor_flash_resource = {
 	.flags		= IORESOURCE_MEM,
-	.start		= CS0_BASE_ADDR,
-	.end		= CS0_BASE_ADDR + SZ_64M - 1,
+	.start		= MX31_CS0_BASE_ADDR,
+	.end		= MX31_CS0_BASE_ADDR + SZ_64M - 1,
 };
 
 static struct platform_device armadillo5x0_nor_flash = {
@@ -311,8 +311,8 @@
  */
 static struct resource armadillo5x0_smc911x_resources[] = {
 	{
-		.start	= CS3_BASE_ADDR,
-		.end	= CS3_BASE_ADDR + SZ_32M - 1,
+		.start	= MX31_CS3_BASE_ADDR,
+		.end	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
@@ -406,9 +406,9 @@
 
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	/* Maintainer: Alberto Panizzo  */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
 	.init_irq	= mx31_init_irq,
 	.timer		= &armadillo5x0_timer,
diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
similarity index 88%
rename from arch/arm/mach-mx3/kzmarm11.c
rename to arch/arm/mach-mx3/mach-kzm_arm11_01.c
index 6fa99ce..f085d5d 100644
--- a/arch/arm/mach-mx3/kzmarm11.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -46,13 +46,18 @@
 
 #include "devices.h"
 
+#define KZM_ARM11_IO_ADDRESS(x) (					\
+	IMX_IO_ADDRESS(x, MX31_CS4) ?:					\
+	IMX_IO_ADDRESS(x, MX31_CS5) ?:					\
+	MX31_IO_ADDRESS(x))
+
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
  */
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= IO_ADDRESS(KZM_ARM11_16550),
+		.membase	= KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
 		.mapbase	= KZM_ARM11_16550,
 		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
 		.irqflags	= IRQ_TYPE_EDGE_RISING,
@@ -102,9 +107,9 @@
 	/*
 	 * Unmask UART interrupt
 	 */
-	tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
+	tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
 	tmp |= 0x2;
-	__raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
+	__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
 
 	return platform_device_register(&serial_device);
 }
@@ -128,8 +133,8 @@
 
 static struct resource kzm_smsc9118_resources[] = {
 	{
-		.start	= CS5_BASE_ADDR,
-		.end	= CS5_BASE_ADDR + SZ_128K - 1,
+		.start	= MX31_CS5_BASE_ADDR,
+		.end	= MX31_CS5_BASE_ADDR + SZ_128K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -222,15 +227,15 @@
  */
 static struct map_desc kzm_io_desc[] __initdata = {
 	{
-		.virtual	= CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
-		.length		= CS4_SIZE,
+		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length		= MX31_CS4_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= CS5_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS5_BASE_ADDR),
-		.length		= CS5_SIZE,
+		.virtual	= MX31_CS5_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS5_BASE_ADDR),
+		.length		= MX31_CS5_SIZE,
 		.type		= MT_DEVICE
 	},
 };
@@ -258,9 +263,9 @@
  * initialize __mach_desc_KZM_ARM11_01 data structure.
  */
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = kzm_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = kzm_board_init,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
similarity index 95%
rename from arch/arm/mach-mx3/mx31pdk.c
rename to arch/arm/mach-mx3/mach-mx31_3ds.c
index 18715f1..b88c18a 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -211,9 +211,9 @@
  */
 static struct map_desc mx31pdk_io_desc[] __initdata = {
 	{
-		.virtual = CS5_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
-		.length = CS5_SIZE,
+		.virtual = MX31_CS5_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+		.length = MX31_CS5_SIZE,
 		.type = MT_DEVICE,
 	},
 };
@@ -256,9 +256,9 @@
  */
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31pdk_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
similarity index 94%
rename from arch/arm/mach-mx3/mx31ads.c
rename to arch/arm/mach-mx3/mach-mx31ads.c
index 938c549..b3d1a18 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -60,7 +60,7 @@
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
-		.mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
+		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
 		.irq      = EXPIO_INT_XUART_INTA,
 		.uartclk  = 14745600,
 		.regshift = 0,
@@ -68,7 +68,7 @@
 		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
 	}, {
 		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
-		.mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
+		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
 		.irq      = EXPIO_INT_XUART_INTB,
 		.uartclk  = 14745600,
 		.regshift = 0,
@@ -309,12 +309,8 @@
 };
 
 static struct regulator_consumer_supply ldo2_consumers[] = {
-	{
-		.supply = "AVDD",
-	},
-	{
-		.supply = "HPVDD",
-	},
+	{ .supply = "AVDD", .dev_name = "1-001a" },
+	{ .supply = "HPVDD", .dev_name = "1-001a" },
 };
 
 /* CODEC and SIM */
@@ -385,8 +381,6 @@
 
 static int mx31_wm8350_init(struct wm8350 *wm8350)
 {
-	int i;
-
 	wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
 			   WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
 			   WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
@@ -422,10 +416,6 @@
 			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
 			   WM8350_GPIO_DEBOUNCE_OFF);
 
-	/* Fix up for our own supplies. */
-	for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
-		ldo2_consumers[i].dev = wm8350->dev;
-
 	wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
 	wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
 	wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
@@ -493,14 +483,27 @@
 }
 #endif
 
+static unsigned int ssi_pins[] = {
+	MX31_PIN_SFS5__SFS5,
+	MX31_PIN_SCK5__SCK5,
+	MX31_PIN_SRXD5__SRXD5,
+	MX31_PIN_STXD5__STXD5,
+};
+
+static void mxc_init_audio(void)
+{
+	mxc_register_device(&imx_ssi_device0, NULL);
+	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
+}
+
 /*!
  * This structure defines static mappings for the i.MX31ADS board.
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
-		.virtual	= CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
-		.length		= CS4_SIZE / 2,
+		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length		= MX31_CS4_SIZE / 2,
 		.type		= MT_DEVICE
 	},
 };
@@ -528,6 +531,7 @@
 	mxc_init_extuart();
 	mxc_init_imx_uart();
 	mxc_init_i2c();
+	mxc_init_audio();
 }
 
 static void __init mx31ads_timer_init(void)
@@ -545,9 +549,9 @@
  */
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31ads_map_io,
 	.init_irq       = mx31ads_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
similarity index 96%
rename from arch/arm/mach-mx3/mx31lilly.c
rename to arch/arm/mach-mx3/mach-mx31lilly.c
index 9ce029f..80847b0 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -57,8 +57,8 @@
 
 static struct resource smsc91x_resources[] = {
 	{
-		.start	= CS4_BASE_ADDR,
-		.end	= CS4_BASE_ADDR + 0xffff,
+		.start	= MX31_CS4_BASE_ADDR,
+		.end	= MX31_CS4_BASE_ADDR + 0xffff,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -195,9 +195,9 @@
 };
 
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
 	.init_irq	= mx31_init_irq,
 	.init_machine	= mx31lilly_board_init,
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
similarity index 95%
rename from arch/arm/mach-mx3/mx31lite.c
rename to arch/arm/mach-mx3/mach-mx31lite.c
index 789b20d..2b6d114 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -82,8 +82,8 @@
 
 static struct resource smsc911x_resources[] = {
 	{
-		.start		= CS4_BASE_ADDR,
-		.end		= CS4_BASE_ADDR + 0x100,
+		.start		= MX31_CS4_BASE_ADDR,
+		.end		= MX31_CS4_BASE_ADDR + 0x100,
 		.flags		= IORESOURCE_MEM,
 	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
@@ -214,9 +214,9 @@
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
-		.virtual = CS4_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
-		.length = CS4_SIZE,
+		.virtual = MX31_CS4_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length = MX31_CS4_SIZE,
 		.type = MT_DEVICE
 	}
 };
@@ -287,9 +287,9 @@
 
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31lite_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
similarity index 93%
rename from arch/arm/mach-mx3/mx31moboard.c
rename to arch/arm/mach-mx3/mach-mx31moboard.c
index cfd605d..a7dc519 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -96,9 +96,6 @@
 	/* LEDs */
 	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
 	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
-	/* SEL */
-	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
-	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 	/* SPI1 */
 	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
 	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
@@ -352,9 +349,7 @@
 
 static int moboard_usbh2_hw_init(struct platform_device *pdev)
 {
-	int ret = gpio_request(USBH2_EN_B, "usbh2-en");
-	if (ret)
-		return ret;
+	int ret;
 
 	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
 
@@ -371,6 +366,9 @@
 	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
 
+	ret = gpio_request(USBH2_EN_B, "usbh2-en");
+	if (ret)
+		return ret;
 	gpio_direction_output(USBH2_EN_B, 0);
 
 	return 0;
@@ -431,34 +429,6 @@
 	},
 };
 
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void mx31moboard_init_sel_gpios(void)
-{
-	if (!gpio_request(SEL0, "sel0")) {
-		gpio_direction_input(SEL0);
-		gpio_export(SEL0, true);
-	}
-
-	if (!gpio_request(SEL1, "sel1")) {
-		gpio_direction_input(SEL1);
-		gpio_export(SEL1, true);
-	}
-
-	if (!gpio_request(SEL2, "sel2")) {
-		gpio_direction_input(SEL2);
-		gpio_export(SEL2, true);
-	}
-
-	if (!gpio_request(SEL3, "sel3")) {
-		gpio_direction_input(SEL3);
-		gpio_export(SEL3, true);
-	}
-}
-
 static struct ipu_platform_data mx3_ipu_data = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
@@ -518,8 +488,6 @@
 
 	mxc_register_device(&mxc_uart_device4, &uart4_pdata);
 
-	mx31moboard_init_sel_gpios();
-
 	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
 	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
 
@@ -552,6 +520,9 @@
 	case MX31MARXBOT:
 		mx31moboard_marxbot_init();
 		break;
+	case MX31SMARTBOT:
+		mx31moboard_smartbot_init();
+		break;
 	default:
 		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
 			mx31moboard_baseboard);
@@ -569,9 +540,9 @@
 
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mach-mx35pdk.c
similarity index 95%
rename from arch/arm/mach-mx3/mx35pdk.c
rename to arch/arm/mach-mx3/mach-mx35pdk.c
index 0bbc65e..bcac84d 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mach-mx35pdk.c
@@ -106,9 +106,9 @@
 
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	/* Maintainer: Freescale Semiconductor, Inc */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX35_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
 	.init_irq       = mx35_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
similarity index 82%
rename from arch/arm/mach-mx3/pcm037.c
rename to arch/arm/mach-mx3/mach-pcm037.c
index 5be3969..11f5315 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -33,6 +33,9 @@
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
 #include <linux/can/platform/sja1000.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
 
 #include <media/soc_camera.h>
 
@@ -51,6 +54,8 @@
 #include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 #include "pcm037.h"
@@ -172,19 +177,7 @@
 	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 	/* GPIO */
 	IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
-};
-
-static struct physmap_flash_data pcm037_flash_data = {
-	.width  = 2,
-};
-
-static struct resource pcm037_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static int usbotg_pins[] = {
+	/* OTG */
 	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
 	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
 	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
@@ -197,39 +190,29 @@
 	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
 	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
 	MX31_PIN_USBOTG_STP__USBOTG_STP,
+	/* USB host 2 */
+	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
 };
 
-/* USB OTG HS port */
-static int __init gpio_usbotg_hs_activate(void)
-{
-	int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
-					ARRAY_SIZE(usbotg_pins), "usbotg");
+static struct physmap_flash_data pcm037_flash_data = {
+	.width  = 2,
+};
 
-	if (ret < 0) {
-		printk(KERN_ERR "Cannot set up OTG pins\n");
-		return ret;
-	}
-
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
-	return 0;
-}
-
-/* OTG config */
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
+static struct resource pcm037_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
 };
 
 static struct platform_device pcm037_flash = {
@@ -248,8 +231,8 @@
 
 static struct resource smsc911x_resources[] = {
 	{
-		.start		= CS1_BASE_ADDR + 0x300,
-		.end		= CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+		.start		= MX31_CS1_BASE_ADDR + 0x300,
+		.end		= MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
@@ -281,8 +264,8 @@
 };
 
 static struct resource pcm038_sram_resource = {
-	.start = CS4_BASE_ADDR,
-	.end   = CS4_BASE_ADDR + 512 * 1024 - 1,
+	.start = MX31_CS4_BASE_ADDR,
+	.end   = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -536,8 +519,8 @@
 
 static struct resource pcm970_sja1000_resources[] = {
 	{
-		.start   = CS5_BASE_ADDR,
-		.end     = CS5_BASE_ADDR + 0x100 - 1,
+		.start   = MX31_CS5_BASE_ADDR,
+		.end     = MX31_CS5_BASE_ADDR + 0x100 - 1,
 		.flags   = IORESOURCE_MEM,
 	}, {
 		.start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
@@ -561,16 +544,65 @@
 	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
 };
 
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm037_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", pcm037_otg_mode);
+
 /*
  * Board specific initialization.
  */
 static void __init mxc_board_init(void)
 {
 	int ret;
+	u32 tmp;
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
 
 	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
 			"pcm037");
 
+#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
+		| PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG);	/* USBH2_DATA2 */
+	mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG);	/* USBH2_DATA3 */
+	mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG);	/* USBH2_DATA4 */
+	mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG);	/* USBH2_DATA5 */
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG);	/* USBH2_DATA6 */
+	mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG);	/* USBH2_DATA7 */
+
 	if (pcm037_variant() == PCM037_EET)
 		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
 			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
@@ -608,8 +640,6 @@
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
-	if (!gpio_usbotg_hs_activate())
-		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 
 	/* CSI */
 	/* Camera power: default - off */
@@ -623,6 +653,23 @@
 		mxc_register_device(&mx3_camera, &camera_pdata);
 
 	platform_device_register(&pcm970_sja1000);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
 }
 
 static void __init pcm037_timer_init(void)
@@ -636,9 +683,9 @@
 
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
similarity index 100%
rename from arch/arm/mach-mx3/pcm037_eet.c
rename to arch/arm/mach-mx3/mach-pcm037_eet.c
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
similarity index 62%
rename from arch/arm/mach-mx3/pcm043.c
rename to arch/arm/mach-mx3/mach-pcm043.c
index e3aa829..1bf1ec2 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -26,8 +26,12 @@
 #include <linux/gpio.h>
 #include <linux/smc911x.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -44,6 +48,10 @@
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
 
 #include "devices.h"
 
@@ -205,6 +213,94 @@
 	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
 	/* gpio */
 	MX35_PAD_ATA_CS0__GPIO2_6,
+	/* USB host */
+	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
+	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+	/* SSI */
+	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
+	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
+	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
+	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+};
+
+#define AC97_GPIO_TXFS	(1 * 32 + 31)
+#define AC97_GPIO_TXD	(1 * 32 + 28)
+#define AC97_GPIO_RESET	(1 * 32 + 0)
+
+static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	int ret;
+
+	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+	if (ret) {
+		printk("failed to get GPIO_TXFS: %d\n", ret);
+		return;
+	}
+
+	mxc_iomux_v3_setup_pad(&txfs_gpio);
+
+	/* warm reset */
+	gpio_direction_output(AC97_GPIO_TXFS, 1);
+	udelay(2);
+	gpio_set_value(AC97_GPIO_TXFS, 0);
+
+	gpio_free(AC97_GPIO_TXFS);
+	mxc_iomux_v3_setup_pad(&txfs);
+}
+
+static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28;
+	struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
+	struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
+	int ret;
+
+	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+	if (ret)
+		goto err1;
+
+	ret = gpio_request(AC97_GPIO_TXD, "SSI");
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(AC97_GPIO_RESET, "SSI");
+	if (ret)
+		goto err3;
+
+	mxc_iomux_v3_setup_pad(&txfs_gpio);
+	mxc_iomux_v3_setup_pad(&txd_gpio);
+	mxc_iomux_v3_setup_pad(&reset_gpio);
+
+	gpio_direction_output(AC97_GPIO_TXFS, 0);
+	gpio_direction_output(AC97_GPIO_TXD, 0);
+
+	/* cold reset */
+	gpio_direction_output(AC97_GPIO_RESET, 0);
+	udelay(10);
+	gpio_direction_output(AC97_GPIO_RESET, 1);
+
+	mxc_iomux_v3_setup_pad(&txd);
+	mxc_iomux_v3_setup_pad(&txfs);
+
+	gpio_free(AC97_GPIO_RESET);
+err3:
+	gpio_free(AC97_GPIO_TXD);
+err2:
+	gpio_free(AC97_GPIO_TXFS);
+err1:
+	if (ret)
+		printk("%s failed with %d\n", __func__, ret);
+	mdelay(1);
+}
+
+static struct imx_ssi_platform_data pcm043_ssi_pdata = {
+	.ac97_reset = pcm043_ac97_cold_reset,
+	.ac97_warm_reset = pcm043_ac97_warm_reset,
+	.flags = IMX_SSI_USE_AC97,
 };
 
 static struct mxc_nand_platform_data pcm037_nand_board_info = {
@@ -212,6 +308,37 @@
 	.hw_ecc = 1,
 };
 
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_UTMI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.portsc	= MXC_EHCI_MODE_SERIAL,
+	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+		  MXC_EHCI_IPPUE_DOWN,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm043_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", pcm043_otg_mode);
+
 /*
  * Board specific initialization.
  */
@@ -219,10 +346,23 @@
 {
 	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
 
+	mxc_audmux_v2_configure_port(3,
+			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+			MXC_AUDMUX_V2_PTCR_TFSEL(0) |
+			MXC_AUDMUX_V2_PTCR_TFSDIR,
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0));
+
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+			MXC_AUDMUX_V2_PTCR_TCSEL(3) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
+			MXC_AUDMUX_V2_PDCR_RXDSEL(3));
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
 
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
@@ -235,6 +375,20 @@
 
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
 }
 
 static void __init pcm043_timer_init(void)
@@ -248,9 +402,9 @@
 
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	/* Maintainer: Pengutronix */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX35_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
 	.init_irq       = mx35_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/mach-qong.c
similarity index 93%
rename from arch/arm/mach-mx3/qong.c
rename to arch/arm/mach-mx3/mach-qong.c
index 044511f..e5b5b83 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -43,7 +43,7 @@
 #define QONG_FPGA_VERSION(major, minor, rev)	\
 	(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
 
-#define QONG_FPGA_BASEADDR 		CS1_BASE_ADDR
+#define QONG_FPGA_BASEADDR 		MX31_CS1_BASE_ADDR
 #define QONG_FPGA_PERIPH_SIZE 		(1 << 24)
 
 #define QONG_FPGA_CTRL_BASEADDR		QONG_FPGA_BASEADDR
@@ -115,8 +115,8 @@
 };
 
 static struct resource qong_flash_resource = {
-	.start = CS0_BASE_ADDR,
-	.end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+	.start = MX31_CS0_BASE_ADDR,
+	.end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -180,8 +180,8 @@
 };
 
 static struct resource qong_nand_resource = {
-	.start  	= CS3_BASE_ADDR,
-	.end    	= CS3_BASE_ADDR + SZ_32M - 1,
+	.start  	= MX31_CS3_BASE_ADDR,
+	.end    	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -198,9 +198,7 @@
 static void __init qong_init_nand_mtd(void)
 {
 	/* init CS */
-	__raw_writel(0x00004f00, CSCR_U(3));
-	__raw_writel(0x20013b31, CSCR_L(3));
-	__raw_writel(0x00020800, CSCR_A(3));
+	mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
 	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
 
 	/* enable pin */
@@ -275,9 +273,9 @@
 
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	/* Maintainer: DENX Software Engineering GmbH */
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 694611d..ccd8742 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -67,6 +67,13 @@
 	MX31_PIN_CSPI1_SS0__SS0,
 	MX31_PIN_CSPI1_SS1__SS1,
 	MX31_PIN_CSPI1_SS2__SS2,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
 };
 
 /* UART */
@@ -79,11 +86,11 @@
 static int gpio_det, gpio_wp;
 
 #define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+		     PAD_CTL_ODE_CMOS)
 
 static int mxc_mmc1_get_ro(struct device *dev)
 {
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
 }
 
 static int mxc_mmc1_init(struct device *dev,
@@ -94,12 +101,17 @@
 	gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
 	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
 
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
 	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
 
 	ret = gpio_request(gpio_det, "MMC detect");
 	if (ret)
@@ -113,7 +125,7 @@
 	gpio_direction_input(gpio_wp);
 
 	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			  "MMC detect", data);
 	if (ret)
 		goto exit_free_wp;
@@ -133,7 +145,7 @@
 {
 	gpio_free(gpio_det);
 	gpio_free(gpio_wp);
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
 }
 
 static struct imxmmc_platform_data mmc_pdata = {
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 438428e..9fbad2e 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -49,6 +49,9 @@
 	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
 	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
 	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+	/* SEL */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -108,6 +111,33 @@
 	.exit	= devboard_sdhc2_exit,
 };
 
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void devboard_init_sel_gpios(void)
+{
+	if (!gpio_request(SEL0, "sel0")) {
+		gpio_direction_input(SEL0);
+		gpio_export(SEL0, true);
+	}
+
+	if (!gpio_request(SEL1, "sel1")) {
+		gpio_direction_input(SEL1);
+		gpio_export(SEL1, true);
+	}
+
+	if (!gpio_request(SEL2, "sel2")) {
+		gpio_direction_input(SEL2);
+		gpio_export(SEL2, true);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -196,5 +226,7 @@
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
 
+	devboard_init_sel_gpios();
+
 	devboard_usbh1_init();
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 1f44b9c..3958515 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -66,6 +66,9 @@
 	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
 	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
 	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+	/* SEL */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -127,12 +130,12 @@
 static void dspics_resets_init(void)
 {
 	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
-		gpio_direction_output(TRSLAT_RST_B, 1);
+		gpio_direction_output(TRSLAT_RST_B, 0);
 		gpio_export(TRSLAT_RST_B, false);
 	}
 
 	if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
-		gpio_direction_output(DSPICS_RST_B, 1);
+		gpio_direction_output(DSPICS_RST_B, 0);
 		gpio_export(DSPICS_RST_B, false);
 	}
 }
@@ -200,7 +203,7 @@
 	int ret = gpio_request(CAM_CHOICE, "cam-choice");
 	if (ret)
 		return ret;
-	gpio_direction_output(CAM_CHOICE, 1);
+	gpio_direction_output(CAM_CHOICE, 0);
 
 	ret = gpio_request(BASECAM_RST_B, "basecam-reset");
 	if (ret)
@@ -223,6 +226,34 @@
 	return 0;
 }
 
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void marxbot_init_sel_gpios(void)
+{
+	if (!gpio_request(SEL0, "sel0")) {
+		gpio_direction_input(SEL0);
+		gpio_export(SEL0, true);
+	}
+
+	if (!gpio_request(SEL1, "sel1")) {
+		gpio_direction_input(SEL1);
+		gpio_export(SEL1, true);
+	}
+
+	if (!gpio_request(SEL2, "sel2")) {
+		gpio_direction_input(SEL2);
+		gpio_export(SEL2, true);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
+
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -307,6 +338,8 @@
 	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
 		"marxbot");
 
+	marxbot_init_sel_gpios();
+
 	dspics_resets_init();
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
new file mode 100644
index 0000000..52a69fc
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include <media/soc_camera.h>
+
+#include "devices.h"
+
+static unsigned int smartbot_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+	/* CSI */
+	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+	/* ENABLES */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#define CAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define CAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+
+static int smartbot_cam_power(struct device *dev, int on)
+{
+	gpio_set_value(CAM_POWER, !on);
+	return 0;
+}
+
+static int smartbot_cam_reset(struct device *dev)
+{
+	gpio_set_value(CAM_RST_B, 0);
+	udelay(100);
+	gpio_set_value(CAM_RST_B, 1);
+	return 0;
+}
+
+static struct i2c_board_info smartbot_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link base_iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= smartbot_cam_power,
+	.reset		= smartbot_cam_reset,
+	.board_info	= &smartbot_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9t031",
+};
+
+static struct platform_device smartbot_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &base_iclink,
+		},
+	},
+};
+
+static struct platform_device *smartbot_cameras[] __initdata = {
+	&smartbot_camera[0],
+};
+
+static int __init smartbot_cam_init(void)
+{
+	int ret = gpio_request(CAM_RST_B, "cam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_RST_B, 1);
+	ret = gpio_request(CAM_POWER, "cam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_POWER, 0);
+
+	return 0;
+}
+
+#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void smartbot_resets_init(void)
+{
+	if (!gpio_request(POWER_EN, "power-enable")) {
+		gpio_direction_output(POWER_EN, 0);
+		gpio_export(POWER_EN, false);
+	}
+
+	if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
+		gpio_direction_output(DSPIC_RST_B, 0);
+		gpio_export(DSPIC_RST_B, false);
+	}
+
+	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+		gpio_direction_output(TRSLAT_RST_B, 0);
+		gpio_export(TRSLAT_RST_B, false);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_smartbot_init(void)
+{
+	printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
+
+	mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
+		"smartbot");
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+	smartbot_resets_init();
+
+	smartbot_cam_init();
+	platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras));
+}
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
new file mode 100644
index 0000000..1576d51
--- /dev/null
+++ b/arch/arm/mach-mx5/Kconfig
@@ -0,0 +1,18 @@
+if ARCH_MX5
+
+config ARCH_MX51
+	bool
+	default y
+	select MXC_TZIC
+	select ARCH_MXC_IOMUX_V3
+
+comment "MX5 platforms:"
+
+config MACH_MX51_BABBAGE
+	bool "Support MX51 BABBAGE platforms"
+	help
+	  Include support for MX51 Babbage platform, also known as MX51EVK in
+	  u-boot. This includes specific configurations for the board and its
+	  peripherals.
+
+endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
new file mode 100644
index 0000000..bf23f86
--- /dev/null
+++ b/arch/arm/mach-mx5/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+obj-y   := cpu.o mm.o clock-mx51.o devices.o
+
+obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
+
diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
new file mode 100644
index 0000000..9939a19
--- /dev/null
+++ b/arch/arm/mach-mx5/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x90008000
+params_phys-y	:= 0x90000100
+initrd_phys-y	:= 0x90800000
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
new file mode 100644
index 0000000..ee67a71
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+static struct platform_device *devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static struct pad_desc mx51babbage_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+
+	/* UART3 */
+	MX51_PAD_EIM_D25__UART3_RXD,
+	MX51_PAD_EIM_D26__UART3_TXD,
+	MX51_PAD_EIM_D27__UART3_RTS,
+	MX51_PAD_EIM_D24__UART3_CTS,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
+					ARRAY_SIZE(mx51babbage_pads));
+	mxc_init_imx_uart();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mx51_babbage_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= mx51_babbage_timer_init,
+};
+
+MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
+	/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
+	.phys_io = MX51_AIPS1_BASE_ADDR,
+	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = mxc_board_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
new file mode 100644
index 0000000..be90c03
--- /dev/null
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -0,0 +1,825 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+
+#include "crm_regs.h"
+
+/* External clock values passed-in by the board code */
+static unsigned long external_high_reference, external_low_reference;
+static unsigned long oscillator_reference, ckih2_reference;
+
+static struct clk osc_clk;
+static struct clk pll1_main_clk;
+static struct clk pll1_sw_clk;
+static struct clk pll2_sw_clk;
+static struct clk pll3_sw_clk;
+static struct clk lp_apm_clk;
+static struct clk periph_apm_clk;
+static struct clk ahb_clk;
+static struct clk ipg_clk;
+
+#define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
+
+static int _clk_ccgr_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_ccgr_disable(struct clk *clk)
+{
+	u32 reg;
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+
+}
+
+static void _clk_ccgr_disable_inwait(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
+	reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+}
+
+/*
+ * For the 4-to-1 muxed input clock
+ */
+static inline u32 _get_mux(struct clk *parent, struct clk *m0,
+			   struct clk *m1, struct clk *m2, struct clk *m3)
+{
+	if (parent == m0)
+		return 0;
+	else if (parent == m1)
+		return 1;
+	else if (parent == m2)
+		return 2;
+	else if (parent == m3)
+		return 3;
+	else
+		BUG();
+
+	return -EINVAL;
+}
+
+static inline void __iomem *_get_pll_base(struct clk *pll)
+{
+	if (pll == &pll1_main_clk)
+		return MX51_DPLL1_BASE;
+	else if (pll == &pll2_sw_clk)
+		return MX51_DPLL2_BASE;
+	else if (pll == &pll3_sw_clk)
+		return MX51_DPLL3_BASE;
+	else
+		BUG();
+
+	return NULL;
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+	unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
+	void __iomem *pllbase;
+	s64 temp;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	pllbase = _get_pll_base(clk);
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+	dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
+
+	if (pll_hfsm == 0) {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+	} else {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
+	mfi = (mfi <= 5) ? 5 : mfi;
+	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+	mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
+	/* Sign extend to 32-bits */
+	if (mfn >= 0x04000000) {
+		mfn |= 0xFC000000;
+		mfn_abs = -mfn;
+	}
+
+	ref_clk = 2 * parent_rate;
+	if (dbl != 0)
+		ref_clk *= 2;
+
+	ref_clk /= (pdf + 1);
+	temp = (u64) ref_clk * mfn_abs;
+	do_div(temp, mfd + 1);
+	if (mfn < 0)
+		temp = -temp;
+	temp = (ref_clk * mfi) + temp;
+
+	return temp;
+}
+
+static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	void __iomem *pllbase;
+
+	long mfi, pdf, mfn, mfd = 999999;
+	s64 temp64;
+	unsigned long quad_parent_rate;
+	unsigned long pll_hfsm, dp_ctl;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	pllbase = _get_pll_base(clk);
+
+	quad_parent_rate = 4 * parent_rate;
+	pdf = mfi = -1;
+	while (++pdf < 16 && mfi < 5)
+		mfi = rate * (pdf+1) / quad_parent_rate;
+	if (mfi > 15)
+		return -EINVAL;
+	pdf--;
+
+	temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
+	do_div(temp64, quad_parent_rate/1000000);
+	mfn = (long)temp64;
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	/* use dpdck0_2 */
+	__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
+	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+	if (pll_hfsm == 0) {
+		reg = mfi << 4 | pdf;
+		__raw_writel(reg, pllbase + MXC_PLL_DP_OP);
+		__raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
+		__raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
+	} else {
+		reg = mfi << 4 | pdf;
+		__raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
+		__raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
+		__raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+
+	return 0;
+}
+
+static int _clk_pll_enable(struct clk *clk)
+{
+	u32 reg;
+	void __iomem *pllbase;
+	int i = 0;
+
+	pllbase = _get_pll_base(clk);
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+
+	/* Wait for lock */
+	do {
+		reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+		if (reg & MXC_PLL_DP_CTL_LRF)
+			break;
+
+		udelay(1);
+	} while (++i < MAX_DPLL_WAIT_TRIES);
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("MX5: pll locking failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void _clk_pll_disable(struct clk *clk)
+{
+	u32 reg;
+	void __iomem *pllbase;
+
+	pllbase = _get_pll_base(clk);
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
+	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+}
+
+static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg, step;
+
+	reg = __raw_readl(MXC_CCM_CCSR);
+
+	/* When switching from pll_main_clk to a bypass clock, first select a
+	 * multiplexed clock in 'step_sel', then shift the glitchless mux
+	 * 'pll1_sw_clk_sel'.
+	 *
+	 * When switching back, do it in reverse order
+	 */
+	if (parent == &pll1_main_clk) {
+		/* Switch to pll1_main_clk */
+		reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+		__raw_writel(reg, MXC_CCM_CCSR);
+		/* step_clk mux switched to lp_apm, to save power. */
+		reg = __raw_readl(MXC_CCM_CCSR);
+		reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+		reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
+				MXC_CCM_CCSR_STEP_SEL_OFFSET);
+	} else {
+		if (parent == &lp_apm_clk) {
+			step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
+		} else  if (parent == &pll2_sw_clk) {
+			step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
+		} else  if (parent == &pll3_sw_clk) {
+			step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
+		} else
+			return -EINVAL;
+
+		reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+		reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
+
+		__raw_writel(reg, MXC_CCM_CCSR);
+		/* Switch to step_clk */
+		reg = __raw_readl(MXC_CCM_CCSR);
+		reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+	}
+	__raw_writel(reg, MXC_CCM_CCSR);
+	return 0;
+}
+
+static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
+{
+	u32 reg, div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CCSR);
+
+	if (clk->parent == &pll2_sw_clk) {
+		div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
+		       MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
+	} else if (clk->parent == &pll3_sw_clk) {
+		div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
+		       MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
+	} else
+		div = 1;
+	return parent_rate / div;
+}
+
+static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCSR);
+
+	if (parent == &pll2_sw_clk)
+		reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+	else
+		reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+
+	__raw_writel(reg, MXC_CCM_CCSR);
+	return 0;
+}
+
+static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	if (parent == &osc_clk)
+		reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
+	else
+		return -EINVAL;
+
+	__raw_writel(reg, MXC_CCM_CCSR);
+
+	return 0;
+}
+
+static unsigned long clk_arm_get_rate(struct clk *clk)
+{
+	u32 cacrr, div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+	cacrr = __raw_readl(MXC_CCM_CACRR);
+	div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
+
+	return parent_rate / div;
+}
+
+static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg, mux;
+	int i = 0;
+
+	mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
+
+	reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
+	reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
+	__raw_writel(reg, MXC_CCM_CBCMR);
+
+	/* Wait for lock */
+	do {
+		reg = __raw_readl(MXC_CCM_CDHIPR);
+		if (!(reg &  MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
+			break;
+
+		udelay(1);
+	} while (++i < MAX_DPLL_WAIT_TRIES);
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("MX5: Set parent for periph_apm clock failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+
+	if (parent == &pll2_sw_clk)
+		reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+	else if (parent == &periph_apm_clk)
+		reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+	else
+		return -EINVAL;
+
+	__raw_writel(reg, MXC_CCM_CBCDR);
+
+	return 0;
+}
+
+static struct clk main_bus_clk = {
+	.parent = &pll2_sw_clk,
+	.set_parent = _clk_main_bus_set_parent,
+};
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+	u32 reg, div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
+	       MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
+	return parent_rate / div;
+}
+
+
+static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg, div;
+	unsigned long parent_rate;
+	int i = 0;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
+	reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
+	__raw_writel(reg, MXC_CCM_CBCDR);
+
+	/* Wait for lock */
+	do {
+		reg = __raw_readl(MXC_CCM_CDHIPR);
+		if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
+			break;
+
+		udelay(1);
+	} while (++i < MAX_DPLL_WAIT_TRIES);
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("MX5: clk_ahb_set_rate failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static unsigned long _clk_ahb_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (div > 8)
+		div = 8;
+	else if (div == 0)
+		div++;
+	return parent_rate / div;
+}
+
+
+static int _clk_max_enable(struct clk *clk)
+{
+	u32 reg;
+
+	_clk_ccgr_enable(clk);
+
+	/* Handshake with MAX when LPM is entered. */
+	reg = __raw_readl(MXC_CCM_CLPCR);
+	reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+	__raw_writel(reg, MXC_CCM_CLPCR);
+
+	return 0;
+}
+
+static void _clk_max_disable(struct clk *clk)
+{
+	u32 reg;
+
+	_clk_ccgr_disable_inwait(clk);
+
+	/* No Handshake with MAX when LPM is entered as its disabled. */
+	reg = __raw_readl(MXC_CCM_CLPCR);
+	reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+	__raw_writel(reg, MXC_CCM_CLPCR);
+}
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+	u32 reg, div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
+	       MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
+
+	return parent_rate / div;
+}
+
+static unsigned long clk_ipg_per_get_rate(struct clk *clk)
+{
+	u32 reg, prediv1, prediv2, podf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
+		/* the main_bus_clk is the one before the DVFS engine */
+		reg = __raw_readl(MXC_CCM_CBCDR);
+		prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
+			   MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
+		prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
+			   MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
+		podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
+			MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
+		return parent_rate / (prediv1 * prediv2 * podf);
+	} else if (clk->parent == &ipg_clk)
+		return parent_rate;
+	else
+		BUG();
+}
+
+static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CBCMR);
+
+	reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+	reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+
+	if (parent == &ipg_clk)
+		reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+	else if (parent == &lp_apm_clk)
+		reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+	else if (parent != &main_bus_clk)
+		return -EINVAL;
+
+	__raw_writel(reg, MXC_CCM_CBCMR);
+
+	return 0;
+}
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+	u32 reg, prediv, podf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CSCDR1);
+	prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >>
+		  MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1;
+	podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >>
+		MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1;
+
+	return parent_rate / (prediv * podf);
+}
+
+static int _clk_uart_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg, mux;
+
+	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
+		       &lp_apm_clk);
+	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK;
+	reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET;
+	__raw_writel(reg, MXC_CCM_CSCMR1);
+
+	return 0;
+}
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+	return external_high_reference;
+}
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+	return external_low_reference;
+}
+
+static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
+{
+	return oscillator_reference;
+}
+
+static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
+{
+	return ckih2_reference;
+}
+
+/* External high frequency clock */
+static struct clk ckih_clk = {
+	.get_rate = get_high_reference_clock_rate,
+};
+
+static struct clk ckih2_clk = {
+	.get_rate = get_ckih2_reference_clock_rate,
+};
+
+static struct clk osc_clk = {
+	.get_rate = get_oscillator_reference_clock_rate,
+};
+
+/* External low frequency (32kHz) clock */
+static struct clk ckil_clk = {
+	.get_rate = get_low_reference_clock_rate,
+};
+
+static struct clk pll1_main_clk = {
+	.parent = &osc_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = _clk_pll_enable,
+	.disable = _clk_pll_disable,
+};
+
+/* Clock tree block diagram (WIP):
+ * 	CCM: Clock Controller Module
+ *
+ * PLL output -> |
+ *               | CCM Switcher -> CCM_CLK_ROOT_GEN ->
+ * PLL bypass -> |
+ *
+ */
+
+/* PLL1 SW supplies to ARM core */
+static struct clk pll1_sw_clk = {
+	.parent = &pll1_main_clk,
+	.set_parent = _clk_pll1_sw_set_parent,
+	.get_rate = clk_pll1_sw_get_rate,
+};
+
+/* PLL2 SW supplies to AXI/AHB/IP buses */
+static struct clk pll2_sw_clk = {
+	.parent = &osc_clk,
+	.get_rate = clk_pll_get_rate,
+	.set_rate = _clk_pll_set_rate,
+	.set_parent = _clk_pll2_sw_set_parent,
+	.enable = _clk_pll_enable,
+	.disable = _clk_pll_disable,
+};
+
+/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
+static struct clk pll3_sw_clk = {
+	.parent = &osc_clk,
+	.set_rate = _clk_pll_set_rate,
+	.get_rate = clk_pll_get_rate,
+	.enable = _clk_pll_enable,
+	.disable = _clk_pll_disable,
+};
+
+/* Low-power Audio Playback Mode clock */
+static struct clk lp_apm_clk = {
+	.parent = &osc_clk,
+	.set_parent = _clk_lp_apm_set_parent,
+};
+
+static struct clk periph_apm_clk = {
+	.parent = &pll1_sw_clk,
+	.set_parent = _clk_periph_apm_set_parent,
+};
+
+static struct clk cpu_clk = {
+	.parent = &pll1_sw_clk,
+	.get_rate = clk_arm_get_rate,
+};
+
+static struct clk ahb_clk = {
+	.parent = &main_bus_clk,
+	.get_rate = clk_ahb_get_rate,
+	.set_rate = _clk_ahb_set_rate,
+	.round_rate = _clk_ahb_round_rate,
+};
+
+/* Main IP interface clock for access to registers */
+static struct clk ipg_clk = {
+	.parent = &ahb_clk,
+	.get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ipg_perclk = {
+	.parent = &lp_apm_clk,
+	.get_rate = clk_ipg_per_get_rate,
+	.set_parent = _clk_ipg_per_set_parent,
+};
+
+static struct clk uart_root_clk = {
+	.parent = &pll2_sw_clk,
+	.get_rate = clk_uart_get_rate,
+	.set_parent = _clk_uart_set_parent,
+};
+
+static struct clk ahb_max_clk = {
+	.parent = &ahb_clk,
+	.enable_reg = MXC_CCM_CCGR0,
+	.enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
+	.enable = _clk_max_enable,
+	.disable = _clk_max_disable,
+};
+
+static struct clk aips_tz1_clk = {
+	.parent = &ahb_clk,
+	.secondary = &ahb_max_clk,
+	.enable_reg = MXC_CCM_CCGR0,
+	.enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk aips_tz2_clk = {
+	.parent = &ahb_clk,
+	.secondary = &ahb_max_clk,
+	.enable_reg = MXC_CCM_CCGR0,
+	.enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk gpt_32k_clk = {
+	.id = 0,
+	.parent = &ckil_clk,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)	\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.set_rate	= sr,			\
+		.enable		= _clk_ccgr_enable,	\
+		.disable	= _clk_ccgr_disable,	\
+		.parent		= p,			\
+		.secondary	= s,			\
+	}
+
+/* DEFINE_CLOCK(name, id, enable_reg, enable_shift,
+   get_rate, set_rate, parent, secondary); */
+
+/* Shared peripheral bus arbiter */
+DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
+	NULL,  NULL, &ipg_clk, NULL);
+
+/* UART */
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
+	NULL,  NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
+	NULL,  NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
+	NULL,  NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
+	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
+	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
+	NULL,  NULL, &ipg_clk, &spba_clk);
+
+/* GPT */
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
+	NULL,  NULL, &ipg_perclk, NULL);
+DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
+	NULL,  NULL, &ipg_clk, NULL);
+
+/* FEC */
+DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
+	NULL,  NULL, &ipg_clk, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+       { \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c,   \
+       },
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+};
+
+static void clk_tree_init(void)
+{
+	u32 reg;
+
+	ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
+
+	/*
+	 * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
+	 * 8MHz, its derived from lp_apm.
+	 *
+	 * FIXME: Verify if true for all boards
+	 */
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
+	reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
+	reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
+	reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
+	__raw_writel(reg, MXC_CCM_CBCDR);
+}
+
+int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
+			unsigned long ckih1, unsigned long ckih2)
+{
+	int i;
+
+	external_low_reference = ckil;
+	external_high_reference = ckih1;
+	ckih2_reference = ckih2;
+	oscillator_reference = osc;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	clk_tree_init();
+
+	clk_enable(&cpu_clk);
+	clk_enable(&main_bus_clk);
+
+	/* System timer */
+	mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
+		MX51_MXC_INT_GPT);
+	return 0;
+}
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
new file mode 100644
index 0000000..41c769f
--- /dev/null
+++ b/arch/arm/mach-mx5/cpu.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This file contains the CPU initialization code.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+static int __init post_cpu_init(void)
+{
+	unsigned int reg;
+	void __iomem *base;
+
+	if (!cpu_is_mx51())
+		return 0;
+
+	base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
+	__raw_writel(0x0, base + 0x40);
+	__raw_writel(0x0, base + 0x44);
+	__raw_writel(0x0, base + 0x48);
+	__raw_writel(0x0, base + 0x4C);
+	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+	__raw_writel(reg, base + 0x50);
+
+	base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
+	__raw_writel(0x0, base + 0x40);
+	__raw_writel(0x0, base + 0x44);
+	__raw_writel(0x0, base + 0x48);
+	__raw_writel(0x0, base + 0x4C);
+	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+	__raw_writel(reg, base + 0x50);
+
+	return 0;
+}
+
+postcore_initcall(post_cpu_init);
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h
new file mode 100644
index 0000000..c776b9a
--- /dev/null
+++ b/arch/arm/mach-mx5/crm_regs.h
@@ -0,0 +1,583 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+
+#define MX51_CCM_BASE		MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
+#define MX51_DPLL1_BASE		MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
+#define MX51_DPLL2_BASE		MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
+#define MX51_DPLL3_BASE		MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
+#define MX51_CORTEXA8_BASE	MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
+#define MX51_GPC_BASE		MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL			0x00
+#define MXC_PLL_DP_CONFIG		0x04
+#define MXC_PLL_DP_OP			0x08
+#define MXC_PLL_DP_MFD			0x0C
+#define MXC_PLL_DP_MFN			0x10
+#define MXC_PLL_DP_MFNMINUS		0x14
+#define MXC_PLL_DP_MFNPLUS		0x18
+#define MXC_PLL_DP_HFS_OP		0x1C
+#define MXC_PLL_DP_HFS_MFD		0x20
+#define MXC_PLL_DP_HFS_MFN		0x24
+#define MXC_PLL_DP_MFN_TOGC		0x28
+#define MXC_PLL_DP_DESTAT		0x2c
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_MUL_CTRL		0x2000
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
+#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET	12
+#define MXC_PLL_DP_CTL_ADE		0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK	(3 << 8)
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET	8
+#define MXC_PLL_DP_CTL_HFSM		0x80
+#define MXC_PLL_DP_CTL_PRE		0x40
+#define MXC_PLL_DP_CTL_UPEN		0x20
+#define MXC_PLL_DP_CTL_RST		0x10
+#define MXC_PLL_DP_CTL_RCP		0x8
+#define MXC_PLL_DP_CTL_PLM		0x4
+#define MXC_PLL_DP_CTL_BRM0		0x2
+#define MXC_PLL_DP_CTL_LRF		0x1
+
+#define MXC_PLL_DP_CONFIG_BIST		0x8
+#define MXC_PLL_DP_CONFIG_SJC_CE	0x4
+#define MXC_PLL_DP_CONFIG_AREN		0x2
+#define MXC_PLL_DP_CONFIG_LDREQ		0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET	4
+#define MXC_PLL_DP_OP_MFI_MASK		(0xF << 4)
+#define MXC_PLL_DP_OP_PDF_OFFSET	0
+#define MXC_PLL_DP_OP_PDF_MASK		0xF
+
+#define MXC_PLL_DP_MFD_OFFSET		0
+#define MXC_PLL_DP_MFD_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET		0x0
+#define MXC_PLL_DP_MFN_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_TOGC_TOG_DIS	(1 << 17)
+#define MXC_PLL_DP_MFN_TOGC_TOG_EN	(1 << 16)
+#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET	0x0
+#define MXC_PLL_DP_MFN_TOGC_CNT_MASK	0xFFFF
+
+#define MXC_PLL_DP_DESTAT_TOG_SEL	(1 << 31)
+#define MXC_PLL_DP_DESTAT_MFN		0x07FFFFFF
+
+/* Register addresses of CCM*/
+#define MXC_CCM_CCR		(MX51_CCM_BASE + 0x00)
+#define MXC_CCM_CCDR		(MX51_CCM_BASE + 0x04)
+#define MXC_CCM_CSR		(MX51_CCM_BASE + 0x08)
+#define MXC_CCM_CCSR		(MX51_CCM_BASE + 0x0C)
+#define MXC_CCM_CACRR		(MX51_CCM_BASE + 0x10)
+#define MXC_CCM_CBCDR		(MX51_CCM_BASE + 0x14)
+#define MXC_CCM_CBCMR		(MX51_CCM_BASE + 0x18)
+#define MXC_CCM_CSCMR1		(MX51_CCM_BASE + 0x1C)
+#define MXC_CCM_CSCMR2		(MX51_CCM_BASE + 0x20)
+#define MXC_CCM_CSCDR1		(MX51_CCM_BASE + 0x24)
+#define MXC_CCM_CS1CDR		(MX51_CCM_BASE + 0x28)
+#define MXC_CCM_CS2CDR		(MX51_CCM_BASE + 0x2C)
+#define MXC_CCM_CDCDR		(MX51_CCM_BASE + 0x30)
+#define MXC_CCM_CHSCDR		(MX51_CCM_BASE + 0x34)
+#define MXC_CCM_CSCDR2		(MX51_CCM_BASE + 0x38)
+#define MXC_CCM_CSCDR3		(MX51_CCM_BASE + 0x3C)
+#define MXC_CCM_CSCDR4		(MX51_CCM_BASE + 0x40)
+#define MXC_CCM_CWDR		(MX51_CCM_BASE + 0x44)
+#define MXC_CCM_CDHIPR		(MX51_CCM_BASE + 0x48)
+#define MXC_CCM_CDCR		(MX51_CCM_BASE + 0x4C)
+#define MXC_CCM_CTOR		(MX51_CCM_BASE + 0x50)
+#define MXC_CCM_CLPCR		(MX51_CCM_BASE + 0x54)
+#define MXC_CCM_CISR		(MX51_CCM_BASE + 0x58)
+#define MXC_CCM_CIMR		(MX51_CCM_BASE + 0x5C)
+#define MXC_CCM_CCOSR		(MX51_CCM_BASE + 0x60)
+#define MXC_CCM_CGPR		(MX51_CCM_BASE + 0x64)
+#define MXC_CCM_CCGR0		(MX51_CCM_BASE + 0x68)
+#define MXC_CCM_CCGR1		(MX51_CCM_BASE + 0x6C)
+#define MXC_CCM_CCGR2		(MX51_CCM_BASE + 0x70)
+#define MXC_CCM_CCGR3		(MX51_CCM_BASE + 0x74)
+#define MXC_CCM_CCGR4		(MX51_CCM_BASE + 0x78)
+#define MXC_CCM_CCGR5		(MX51_CCM_BASE + 0x7C)
+#define MXC_CCM_CCGR6		(MX51_CCM_BASE + 0x80)
+#define MXC_CCM_CMEOR		(MX51_CCM_BASE + 0x84)
+
+/* Define the bits in register CCR */
+#define MXC_CCM_CCR_COSC_EN		(1 << 12)
+#define MXC_CCM_CCR_FPM_MULT_MASK	(1 << 11)
+#define MXC_CCM_CCR_CAMP2_EN		(1 << 10)
+#define MXC_CCM_CCR_CAMP1_EN		(1 << 9)
+#define MXC_CCM_CCR_FPM_EN		(1 << 8)
+#define MXC_CCM_CCR_OSCNT_OFFSET	(0)
+#define MXC_CCM_CCR_OSCNT_MASK	(0xFF)
+
+/* Define the bits in register CCDR */
+#define MXC_CCM_CCDR_HSC_HS_MASK	(0x1 << 18)
+#define MXC_CCM_CCDR_IPU_HS_MASK	(0x1 << 17)
+#define MXC_CCM_CCDR_EMI_HS_MASK	(0x1 << 16)
+
+/* Define the bits in register CSR */
+#define MXC_CCM_CSR_COSR_READY	(1 << 5)
+#define MXC_CCM_CSR_LVS_VALUE	(1 << 4)
+#define MXC_CCM_CSR_CAMP2_READY	(1 << 3)
+#define MXC_CCM_CSR_CAMP1_READY	(1 << 2)
+#define MXC_CCM_CSR_FPM_READY	(1 << 1)
+#define MXC_CCM_CSR_REF_EN_B	(1 << 0)
+
+/* Define the bits in register CCSR */
+#define MXC_CCM_CCSR_LP_APM_SEL		(0x1 << 9)
+#define MXC_CCM_CCSR_STEP_SEL_OFFSET	(7)
+#define MXC_CCM_CCSR_STEP_SEL_MASK	(0x3 << 7)
+#define MXC_CCM_CCSR_STEP_SEL_LP_APM	   0
+#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS  1 /* Only when JTAG connected? */
+#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
+#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
+#define MXC_CCM_CCSR_PLL2_PODF_OFFSET	(5)
+#define MXC_CCM_CCSR_PLL2_PODF_MASK	(0x3 << 5)
+#define MXC_CCM_CCSR_PLL3_PODF_OFFSET	(3)
+#define MXC_CCM_CCSR_PLL3_PODF_MASK	(0x3 << 3)
+#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL	(1 << 2) /* 0: pll1_main_clk,
+						    1: step_clk */
+#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL	(1 << 1)
+#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL	(1 << 0)
+
+/* Define the bits in register CACRR */
+#define MXC_CCM_CACRR_ARM_PODF_OFFSET	(0)
+#define MXC_CCM_CACRR_ARM_PODF_MASK	(0x7)
+
+/* Define the bits in register CBCDR */
+#define MXC_CCM_CBCDR_EMI_CLK_SEL		(0x1 << 26)
+#define MXC_CCM_CBCDR_PERIPH_CLK_SEL		(0x1 << 25)
+#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET		(30)
+#define MXC_CCM_CBCDR_DDR_HF_SEL		(0x1 << 30)
+#define MXC_CCM_CBCDR_DDR_PODF_OFFSET		(27)
+#define MXC_CCM_CBCDR_DDR_PODF_MASK		(0x7 << 27)
+#define MXC_CCM_CBCDR_EMI_PODF_OFFSET		(22)
+#define MXC_CCM_CBCDR_EMI_PODF_MASK		(0x7 << 22)
+#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET		(19)
+#define MXC_CCM_CBCDR_AXI_B_PODF_MASK		(0x7 << 19)
+#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET		(16)
+#define MXC_CCM_CBCDR_AXI_A_PODF_MASK		(0x7 << 16)
+#define MXC_CCM_CBCDR_NFC_PODF_OFFSET		(13)
+#define MXC_CCM_CBCDR_NFC_PODF_MASK		(0x7 << 13)
+#define MXC_CCM_CBCDR_AHB_PODF_OFFSET		(10)
+#define MXC_CCM_CBCDR_AHB_PODF_MASK		(0x7 << 10)
+#define MXC_CCM_CBCDR_IPG_PODF_OFFSET		(8)
+#define MXC_CCM_CBCDR_IPG_PODF_MASK		(0x3 << 8)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET	(6)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK		(0x3 << 6)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET	(3)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK		(0x7 << 3)
+#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET	(0)
+#define MXC_CCM_CBCDR_PERCLK_PODF_MASK		(0x7)
+
+/* Define the bits in register CBCMR */
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET	(14)
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK	(0x3 << 14)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET	(12)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK	(0x3 << 12)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET	(10)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK		(0x3 << 10)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET	(8)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK	(0x3 << 8)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET	(6)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK	(0x3 << 6)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET	(4)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK		(0x3 << 4)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET	(14)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK	(0x3 << 14)
+#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL	(0x1 << 1)
+#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL	(0x1 << 0)
+
+/* Define the bits in register CSCMR1 */
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET		(30)
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK		(0x3 << 30)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET		(28)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK		(0x3 << 28)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET		(26)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL			(0x1 << 26)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET		(24)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK		(0x3 << 24)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET		(22)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK		(0x3 << 22)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET	(20)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK	(0x3 << 20)
+#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL			(0x1 << 19)
+#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL			(0x1 << 18)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET	(16)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK	(0x3 << 16)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET		(14)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET		(12)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK		(0x3 << 12)
+#define MXC_CCM_CSCMR1_SSI3_CLK_SEL			(0x1 << 11)
+#define MXC_CCM_CSCMR1_VPU_RCLK_SEL			(0x1 << 10)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET		(8)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK		(0x3 << 8)
+#define MXC_CCM_CSCMR1_TVE_CLK_SEL			(0x1 << 7)
+#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL			(0x1 << 6)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET		(4)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK		(0x3 << 4)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET		(2)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK		(0x3 << 2)
+#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL		(0x1 << 1)
+#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL		(0x1)
+
+/* Define the bits in register CSCMR2 */
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n)		(26+n*3)
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n)		(0x7 << (26+n*3))
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET		(24)
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK		(0x3 << 24)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET		(22)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK		(0x3 << 22)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET		(20)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK			(0x3 << 20)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET		(18)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK		(0x3 << 18)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET		(16)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK		(0x3 << 16)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET		(14)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET		(12)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK		(0x3 << 12)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET		(10)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK			(0x3 << 10)
+#define MXC_CCM_CSCMR2_SLIMBUS_COM			(0x1 << 9)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET		(6)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK		(0x7 << 6)
+#define MXC_CCM_CSCMR2_SPDIF1_COM			(1 << 5)
+#define MXC_CCM_CSCMR2_SPDIF0_COM			(1 << 4)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET		(2)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK		(0x3 << 2)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET		(0)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK		(0x3)
+
+/* Define the bits in register CSCDR1 */
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET	(22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK	(0x7 << 22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET	(19)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK	(0x7 << 19)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET	(16)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK	(0x7 << 16)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET		(14)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK		(0x3 << 14)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET	(11)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK	(0x7 << 11)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET		(8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK		(0x7 << 8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET		(6)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK		(0x3 << 6)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET		(3)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK		(0x7 << 3)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK		(0x7)
+
+/* Define the bits in register CS1CDR and CS2CDR */
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET		(22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK		(0x7 << 22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET		(16)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK		(0x3F << 16)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK		(0x3F)
+
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET		(22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK		(0x7 << 22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET		(16)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK		(0x3F << 16)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK		(0x3F)
+
+/* Define the bits in register CDCDR */
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET		(28)
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK			(0x7 << 28)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET		(25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK		(0x7 << 25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET		(19)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK		(0x3F << 19)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET		(16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET		(9)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK			(0x7 << 6)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET		(3)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK			(0x7 << 3)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET		(0)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK			(0x7)
+
+/* Define the bits in register CHSCCDR */
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET		(12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK		(0x7 << 12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET		(6)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK		(0x3F << 6)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET		(3)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK		(0x7 << 3)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK		(0x7)
+
+/* Define the bits in register CSCDR2 */
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET		(25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK		(0x7 << 25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET		(19)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK		(0x3F << 19)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET		(16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET		(9)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET		(0)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK		(0x3F)
+
+/* Define the bits in register CSCDR3 */
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET		(16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET		(9)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK		(0x3F)
+
+/* Define the bits in register CSCDR4 */
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET	(16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET	(9)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET	(6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET	(0)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK		(0x3F)
+
+/* Define the bits in register CDHIPR */
+#define MXC_CCM_CDHIPR_ARM_PODF_BUSY			(1 << 16)
+#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY		(1 << 8)
+#define MXC_CCM_CDHIPR_DDR_PODF_BUSY			(1 << 7)
+#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY			(1 << 6)
+#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY		(1 << 5)
+#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY	(1 << 4)
+#define MXC_CCM_CDHIPR_AHB_PODF_BUSY			(1 << 3)
+#define MXC_CCM_CDHIPR_EMI_PODF_BUSY			(1 << 2)
+#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY			(1 << 1)
+#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY			(1 << 0)
+
+/* Define the bits in register CDCR */
+#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER		(0x1 << 2)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET	(0)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK		(0x3)
+
+/* Define the bits in register CLPCR */
+#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS		(0x1 << 23)
+#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS		(0x1 << 22)
+#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS		(0x1 << 21)
+#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS	(0x1 << 20)
+#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS		(0x1 << 19)
+#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS		(0x1 << 18)
+#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS	(0x1 << 17)
+#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS	(0x1 << 16)
+#define MXC_CCM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
+#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET		(9)
+#define MXC_CCM_CLPCR_STBY_COUNT_MASK		(0x3 << 9)
+#define MXC_CCM_CLPCR_VSTBY			(0x1 << 8)
+#define MXC_CCM_CLPCR_DIS_REF_OSC		(0x1 << 7)
+#define MXC_CCM_CLPCR_SBYOS			(0x1 << 6)
+#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET	(3)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK		(0x3 << 3)
+#define MXC_CCM_CLPCR_LPM_OFFSET		(0)
+#define MXC_CCM_CLPCR_LPM_MASK			(0x3)
+
+/* Define the bits in register CISR */
+#define MXC_CCM_CISR_ARM_PODF_LOADED			(0x1 << 25)
+#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED	(0x1 << 21)
+#define MXC_CCM_CISR_AHB_PODF_LOADED			(0x1 << 20)
+#define MXC_CCM_CISR_EMI_PODF_LOADED			(0x1 << 19)
+#define MXC_CCM_CISR_AXI_B_PODF_LOADED			(0x1 << 18)
+#define MXC_CCM_CISR_AXI_A_PODF_LOADED			(0x1 << 17)
+#define MXC_CCM_CISR_DIVIDER_LOADED			(0x1 << 16)
+#define MXC_CCM_CISR_COSC_READY				(0x1 << 6)
+#define MXC_CCM_CISR_CKIH2_READY			(0x1 << 5)
+#define MXC_CCM_CISR_CKIH_READY				(0x1 << 4)
+#define MXC_CCM_CISR_FPM_READY				(0x1 << 3)
+#define MXC_CCM_CISR_LRF_PLL3				(0x1 << 2)
+#define MXC_CCM_CISR_LRF_PLL2				(0x1 << 1)
+#define MXC_CCM_CISR_LRF_PLL1				(0x1)
+
+/* Define the bits in register CIMR */
+#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED		(0x1 << 25)
+#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED	(0x1 << 21)
+#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED		(0x1 << 20)
+#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED		(0x1 << 19)
+#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED		(0x1 << 18)
+#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED		(0x1 << 17)
+#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED		(0x1 << 16)
+#define MXC_CCM_CIMR_MASK_COSC_READY			(0x1 << 5)
+#define MXC_CCM_CIMR_MASK_CKIH_READY			(0x1 << 4)
+#define MXC_CCM_CIMR_MASK_FPM_READY			(0x1 << 3)
+#define MXC_CCM_CIMR_MASK_LRF_PLL3			(0x1 << 2)
+#define MXC_CCM_CIMR_MASK_LRF_PLL2			(0x1 << 1)
+#define MXC_CCM_CIMR_MASK_LRF_PLL1			(0x1)
+
+/* Define the bits in register CCOSR */
+#define MXC_CCM_CCOSR_CKO2_EN_OFFSET			(0x1 << 24)
+#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET			(21)
+#define MXC_CCM_CCOSR_CKO2_DIV_MASK			(0x7 << 21)
+#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET			(16)
+#define MXC_CCM_CCOSR_CKO2_SEL_MASK			(0x1F << 16)
+#define MXC_CCM_CCOSR_CKOL_EN				(0x1 << 7)
+#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET			(4)
+#define MXC_CCM_CCOSR_CKOL_DIV_MASK			(0x7 << 4)
+#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET			(0)
+#define MXC_CCM_CCOSR_CKOL_SEL_MASK			(0xF)
+
+/* Define the bits in registers CGPR */
+#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE		(0x1 << 4)
+#define MXC_CCM_CGPR_FPM_SEL				(0x1 << 3)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET		(0)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK		(0x7)
+
+/* Define the bits in registers CCGRx */
+#define MXC_CCM_CCGRx_CG_MASK				0x3
+#define MXC_CCM_CCGRx_MOD_OFF				0x0
+#define MXC_CCM_CCGRx_MOD_ON				0x3
+#define MXC_CCM_CCGRx_MOD_IDLE				0x1
+
+#define MXC_CCM_CCGRx_CG15_MASK				(0x3 << 30)
+#define MXC_CCM_CCGRx_CG14_MASK				(0x3 << 28)
+#define MXC_CCM_CCGRx_CG13_MASK				(0x3 << 26)
+#define MXC_CCM_CCGRx_CG12_MASK				(0x3 << 24)
+#define MXC_CCM_CCGRx_CG11_MASK				(0x3 << 22)
+#define MXC_CCM_CCGRx_CG10_MASK				(0x3 << 20)
+#define MXC_CCM_CCGRx_CG9_MASK				(0x3 << 18)
+#define MXC_CCM_CCGRx_CG8_MASK				(0x3 << 16)
+#define MXC_CCM_CCGRx_CG5_MASK				(0x3 << 10)
+#define MXC_CCM_CCGRx_CG4_MASK				(0x3 << 8)
+#define MXC_CCM_CCGRx_CG3_MASK				(0x3 << 6)
+#define MXC_CCM_CCGRx_CG2_MASK				(0x3 << 4)
+#define MXC_CCM_CCGRx_CG1_MASK				(0x3 << 2)
+#define MXC_CCM_CCGRx_CG0_MASK				(0x3 << 0)
+
+#define MXC_CCM_CCGRx_CG15_OFFSET			30
+#define MXC_CCM_CCGRx_CG14_OFFSET			28
+#define MXC_CCM_CCGRx_CG13_OFFSET			26
+#define MXC_CCM_CCGRx_CG12_OFFSET			24
+#define MXC_CCM_CCGRx_CG11_OFFSET			22
+#define MXC_CCM_CCGRx_CG10_OFFSET			20
+#define MXC_CCM_CCGRx_CG9_OFFSET			18
+#define MXC_CCM_CCGRx_CG8_OFFSET			16
+#define MXC_CCM_CCGRx_CG7_OFFSET			14
+#define MXC_CCM_CCGRx_CG6_OFFSET			12
+#define MXC_CCM_CCGRx_CG5_OFFSET			10
+#define MXC_CCM_CCGRx_CG4_OFFSET			8
+#define MXC_CCM_CCGRx_CG3_OFFSET			6
+#define MXC_CCM_CCGRx_CG2_OFFSET			4
+#define MXC_CCM_CCGRx_CG1_OFFSET			2
+#define MXC_CCM_CCGRx_CG0_OFFSET			0
+
+#define MXC_DPTC_LP_BASE	(MX51_GPC_BASE + 0x80)
+#define MXC_DPTC_GP_BASE	(MX51_GPC_BASE + 0x100)
+#define MXC_DVFS_CORE_BASE	(MX51_GPC_BASE + 0x180)
+#define MXC_DPTC_PER_BASE	(MX51_GPC_BASE + 0x1C0)
+#define MXC_PGC_IPU_BASE	(MX51_GPC_BASE + 0x220)
+#define MXC_PGC_VPU_BASE	(MX51_GPC_BASE + 0x240)
+#define MXC_PGC_GPU_BASE	(MX51_GPC_BASE + 0x260)
+#define MXC_SRPG_NEON_BASE	(MX51_GPC_BASE + 0x280)
+#define MXC_SRPG_ARM_BASE	(MX51_GPC_BASE + 0x2A0)
+#define MXC_SRPG_EMPGC0_BASE	(MX51_GPC_BASE + 0x2C0)
+#define MXC_SRPG_EMPGC1_BASE	(MX51_GPC_BASE + 0x2D0)
+#define MXC_SRPG_MEGAMIX_BASE	(MX51_GPC_BASE + 0x2E0)
+#define MXC_SRPG_EMI_BASE	(MX51_GPC_BASE + 0x300)
+
+/* CORTEXA8 platform */
+#define MXC_CORTEXA8_PLAT_PVID		(MX51_CORTEXA8_BASE + 0x0)
+#define MXC_CORTEXA8_PLAT_GPC		(MX51_CORTEXA8_BASE + 0x4)
+#define MXC_CORTEXA8_PLAT_PIC		(MX51_CORTEXA8_BASE + 0x8)
+#define MXC_CORTEXA8_PLAT_LPC		(MX51_CORTEXA8_BASE + 0xC)
+#define MXC_CORTEXA8_PLAT_NEON_LPC	(MX51_CORTEXA8_BASE + 0x10)
+#define MXC_CORTEXA8_PLAT_ICGC		(MX51_CORTEXA8_BASE + 0x14)
+#define MXC_CORTEXA8_PLAT_AMC		(MX51_CORTEXA8_BASE + 0x18)
+#define MXC_CORTEXA8_PLAT_NMC		(MX51_CORTEXA8_BASE + 0x20)
+#define MXC_CORTEXA8_PLAT_NMS		(MX51_CORTEXA8_BASE + 0x24)
+
+/* DVFS CORE */
+#define MXC_DVFSTHRS		(MXC_DVFS_CORE_BASE + 0x00)
+#define MXC_DVFSCOUN		(MXC_DVFS_CORE_BASE + 0x04)
+#define MXC_DVFSSIG1		(MXC_DVFS_CORE_BASE + 0x08)
+#define MXC_DVFSSIG0		(MXC_DVFS_CORE_BASE + 0x0C)
+#define MXC_DVFSGPC0		(MXC_DVFS_CORE_BASE + 0x10)
+#define MXC_DVFSGPC1		(MXC_DVFS_CORE_BASE + 0x14)
+#define MXC_DVFSGPBT		(MXC_DVFS_CORE_BASE + 0x18)
+#define MXC_DVFSEMAC		(MXC_DVFS_CORE_BASE + 0x1C)
+#define MXC_DVFSCNTR		(MXC_DVFS_CORE_BASE + 0x20)
+#define MXC_DVFSLTR0_0		(MXC_DVFS_CORE_BASE + 0x24)
+#define MXC_DVFSLTR0_1		(MXC_DVFS_CORE_BASE + 0x28)
+#define MXC_DVFSLTR1_0		(MXC_DVFS_CORE_BASE + 0x2C)
+#define MXC_DVFSLTR1_1		(MXC_DVFS_CORE_BASE + 0x30)
+#define MXC_DVFSPT0 		(MXC_DVFS_CORE_BASE + 0x34)
+#define MXC_DVFSPT1 		(MXC_DVFS_CORE_BASE + 0x38)
+#define MXC_DVFSPT2 		(MXC_DVFS_CORE_BASE + 0x3C)
+#define MXC_DVFSPT3 		(MXC_DVFS_CORE_BASE + 0x40)
+
+/* GPC */
+#define MXC_GPC_CNTR		(MX51_GPC_BASE + 0x0)
+#define MXC_GPC_PGR		(MX51_GPC_BASE + 0x4)
+#define MXC_GPC_VCR		(MX51_GPC_BASE + 0x8)
+#define MXC_GPC_ALL_PU		(MX51_GPC_BASE + 0xC)
+#define MXC_GPC_NEON		(MX51_GPC_BASE + 0x10)
+#define MXC_GPC_PGR_ARMPG_OFFSET	8
+#define MXC_GPC_PGR_ARMPG_MASK		(3 << 8)
+
+/* PGC */
+#define MXC_PGC_IPU_PGCR	(MXC_PGC_IPU_BASE + 0x0)
+#define MXC_PGC_IPU_PGSR	(MXC_PGC_IPU_BASE + 0xC)
+#define MXC_PGC_VPU_PGCR	(MXC_PGC_VPU_BASE + 0x0)
+#define MXC_PGC_VPU_PGSR	(MXC_PGC_VPU_BASE + 0xC)
+#define MXC_PGC_GPU_PGCR	(MXC_PGC_GPU_BASE + 0x0)
+#define MXC_PGC_GPU_PGSR	(MXC_PGC_GPU_BASE + 0xC)
+
+#define MXC_PGCR_PCR		1
+#define MXC_SRPGCR_PCR		1
+#define MXC_EMPGCR_PCR		1
+#define MXC_PGSR_PSR		1
+
+
+#define MXC_CORTEXA8_PLAT_LPC_DSM	(1 << 0)
+#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM	(1 << 1)
+
+/* SRPG */
+#define MXC_SRPG_NEON_SRPGCR	(MXC_SRPG_NEON_BASE + 0x0)
+#define MXC_SRPG_NEON_PUPSCR	(MXC_SRPG_NEON_BASE + 0x4)
+#define MXC_SRPG_NEON_PDNSCR	(MXC_SRPG_NEON_BASE + 0x8)
+
+#define MXC_SRPG_ARM_SRPGCR	(MXC_SRPG_ARM_BASE + 0x0)
+#define MXC_SRPG_ARM_PUPSCR	(MXC_SRPG_ARM_BASE + 0x4)
+#define MXC_SRPG_ARM_PDNSCR	(MXC_SRPG_ARM_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC0_SRPGCR	(MXC_SRPG_EMPGC0_BASE + 0x0)
+#define MXC_SRPG_EMPGC0_PUPSCR	(MXC_SRPG_EMPGC0_BASE + 0x4)
+#define MXC_SRPG_EMPGC0_PDNSCR	(MXC_SRPG_EMPGC0_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC1_SRPGCR	(MXC_SRPG_EMPGC1_BASE + 0x0)
+#define MXC_SRPG_EMPGC1_PUPSCR	(MXC_SRPG_EMPGC1_BASE + 0x4)
+#define MXC_SRPG_EMPGC1_PDNSCR	(MXC_SRPG_EMPGC1_BASE + 0x8)
+
+#define MXC_SRPG_MEGAMIX_SRPGCR		(MXC_SRPG_MEGAMIX_BASE + 0x0)
+#define MXC_SRPG_MEGAMIX_PUPSCR		(MXC_SRPG_MEGAMIX_BASE + 0x4)
+#define MXC_SRPG_MEGAMIX_PDNSCR		(MXC_SRPG_MEGAMIX_BASE + 0x8)
+
+#define MXC_SRPGC_EMI_SRPGCR	(MXC_SRPGC_EMI_BASE + 0x0)
+#define MXC_SRPGC_EMI_PUPSCR	(MXC_SRPGC_EMI_BASE + 0x4)
+#define MXC_SRPGC_EMI_PDNSCR	(MXC_SRPGC_EMI_BASE + 0x8)
+
+#endif				/* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
new file mode 100644
index 0000000..d6fd396
--- /dev/null
+++ b/arch/arm/mach-mx5/devices.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+
+static struct resource uart0[] = {
+	{
+		.start = MX51_UART1_BASE_ADDR,
+		.end = MX51_UART1_BASE_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_UART1,
+		.end = MX51_MXC_INT_UART1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device0 = {
+	.name = "imx-uart",
+	.id = 0,
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+	{
+		.start = MX51_UART2_BASE_ADDR,
+		.end = MX51_UART2_BASE_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_UART2,
+		.end = MX51_MXC_INT_UART2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device1 = {
+	.name = "imx-uart",
+	.id = 1,
+	.resource = uart1,
+	.num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+	{
+		.start = MX51_UART3_BASE_ADDR,
+		.end = MX51_UART3_BASE_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_UART3,
+		.end = MX51_MXC_INT_UART3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device2 = {
+	.name = "imx-uart",
+	.id = 2,
+	.resource = uart2,
+	.num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource mxc_fec_resources[] = {
+	{
+		.start	= MX51_MXC_FEC_BASE_ADDR,
+		.end	= MX51_MXC_FEC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX51_MXC_INT_FEC,
+		.end	= MX51_MXC_INT_FEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_fec_device = {
+	.name = "fec",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_fec_resources),
+	.resource = mxc_fec_resources,
+};
+
+/* Dummy definition to allow compiling in AVIC and TZIC simultaneously */
+int __init mxc_register_gpios(void)
+{
+	return 0;
+}
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
new file mode 100644
index 0000000..f339ab8
--- /dev/null
+++ b/arch/arm/mach-mx5/devices.h
@@ -0,0 +1,4 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_fec_device;
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
new file mode 100644
index 0000000..c21e18b
--- /dev/null
+++ b/arch/arm/mach-mx5/mm.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License.  You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Create static mapping between physical to virtual memory.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * Define the MX51 memory map.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+	{
+		.virtual = MX51_IRAM_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_IRAM_BASE_ADDR),
+		.length = MX51_IRAM_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_DEBUG_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR),
+		.length = MX51_DEBUG_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_TZIC_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR),
+		.length = MX51_TZIC_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_AIPS1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR),
+		.length = MX51_AIPS1_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_SPBA0_BASE_ADDR),
+		.length = MX51_SPBA0_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_AIPS2_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR),
+		.length = MX51_AIPS2_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_NFC_AXI_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR),
+		.length = MX51_NFC_AXI_SIZE,
+		.type = MT_DEVICE
+	},
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx51_map_io(void)
+{
+	u32 tzic_addr;
+
+	if (mx51_revision() < MX51_CHIP_REV_2_0)
+		tzic_addr = 0x8FFFC000;
+	else
+		tzic_addr = 0xE0003000;
+	mxc_io_desc[2].pfn =  __phys_to_pfn(tzic_addr);
+
+	mxc_set_cpu_type(MXC_CPU_MX51);
+	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx51_init_irq(void)
+{
+	tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
index 7dbe4ca..69816ba 100644
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -55,7 +55,7 @@
 MACHINE_START(MAGX_ZN5, "Motorola Zn5")
 	.phys_io	= MXC91231_AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.boot_params	= MXC91231_PHYS_OFFSET + 0x100,
 	.map_io		= mxc91231_map_io,
 	.init_irq	= mxc91231_init_irq,
 	.timer		= &zn5_timer,
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 9438bf6..ab3712c8 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -38,7 +38,7 @@
 #define SRC_CR_INIT_MASK	0x00007fff
 #define SRC_CR_INIT_VAL		0x2aaa8000
 
-/* These adresses span 16MB, so use three individual pages */
+/* These addresses span 16MB, so use three individual pages */
 static struct resource nhk8815_nand_resources[] = {
 	{
 		.name = "nand_addr",
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
old mode 100755
new mode 100644
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
old mode 100755
new mode 100644
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index c3d513c..905719a 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -57,6 +57,13 @@
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Linkstation Mini platform.
 
+config MACH_LINKSTATION_LS_HGL
+	bool "Buffalo Linkstation LS-HGL"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo Linkstation LS-HGL platform.
+
 config MACH_TS409
 	bool "QNAP TS-409"
 	help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 89772fc..eb6eabc 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -5,6 +5,7 @@
 obj-$(CONFIG_MACH_TERASTATION_PRO2)	+= terastation_pro2-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
 obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
 obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index f87fa12..8dc2c76 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -488,7 +488,7 @@
 	.dev		= {
 		.dma_mask		= &orion5x_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&orion5x_xor0_data,
+		.platform_data		= &orion5x_xor0_data,
 	},
 };
 
@@ -514,7 +514,7 @@
 	.dev		= {
 		.dma_mask		= &orion5x_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&orion5x_xor1_data,
+		.platform_data		= &orion5x_xor1_data,
 	},
 };
 
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 9d4bf76..7130904 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -149,10 +149,7 @@
 
 /*
  * The blue front LED is wired to the CPLD and can blink in relation with the
- * SATA activity. This feature is disabled to make this LED compatible with
- * the leds-gpio driver: MPP14 and MPP15 are configured to act like output
- * GPIO's and have to stay in an active state. This is needed to set the blue
- * LED in a "fix on" state regardless of the SATA activity.
+ * SATA activity.
  *
  * The following array detail the different LED registers and the combination
  * of their possible values:
@@ -171,12 +168,11 @@
 #define D2NET_GPIO_RED_LED		6
 #define D2NET_GPIO_BLUE_LED_BLINK_CTRL	16
 #define D2NET_GPIO_BLUE_LED_OFF		23
-#define D2NET_GPIO_SATA0_ACT		14
-#define D2NET_GPIO_SATA1_ACT		15
 
 static struct gpio_led d2net_leds[] = {
 	{
-		.name = "d2net:blue:power",
+		.name = "d2net:blue:sata",
+		.default_trigger = "default-on",
 		.gpio = D2NET_GPIO_BLUE_LED_OFF,
 		.active_low = 1,
 	},
@@ -201,25 +197,22 @@
 
 static void __init d2net_gpio_leds_init(void)
 {
+	int err;
+
 	/* Configure GPIO over MPP max number. */
 	orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
 
-	if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0)
-		return;
-	if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0)
-		goto err_free_1;
-	if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0)
-		goto err_free_1;
-	if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0)
-		goto err_free_2;
-	platform_device_register(&d2net_gpio_leds);
-	return;
+	/* Configure register blink_ctrl to allow SATA activity LED blinking. */
+	err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
+	}
+	if (err)
+		pr_err("d2net: failed to configure blue LED blink GPIO\n");
 
-err_free_2:
-	gpio_free(D2NET_GPIO_SATA1_ACT);
-err_free_1:
-	gpio_free(D2NET_GPIO_SATA0_ACT);
-	return;
+	platform_device_register(&d2net_gpio_leds);
 }
 
 /****************************************************************************
@@ -289,8 +282,8 @@
 	{ 11, MPP_UNUSED },
 	{ 12, MPP_GPIO },	/* SATA 1 power */
 	{ 13, MPP_UNUSED },
-	{ 14, MPP_GPIO },	/* SATA 0 active */
-	{ 15, MPP_GPIO },	/* SATA 1 active */
+	{ 14, MPP_SATA_LED },	/* SATA 0 active */
+	{ 15, MPP_SATA_LED },	/* SATA 1 active */
 	{ 16, MPP_GPIO },	/* Blue front LED blink control */
 	{ 17, MPP_UNUSED },
 	{ 18, MPP_GPIO },	/* Front button (0 = Released, 1 = Pushed ) */
@@ -301,6 +294,8 @@
 	/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
 };
 
+#define D2NET_GPIO_INHIBIT_POWER_OFF    24
+
 static void __init d2net_init(void)
 {
 	/*
@@ -333,6 +328,8 @@
 
 	i2c_register_board_info(0, d2net_i2c_devices,
 				ARRAY_SIZE(d2net_i2c_devices));
+
+	orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);
 }
 
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 8f159db..421b82f 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -34,7 +34,8 @@
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
 #define DNS323_GPIO_LED_LEFT_AMBER	2
 #define DNS323_GPIO_SYSTEM_UP		3
-#define DNS323_GPIO_LED_POWER		5
+#define DNS323_GPIO_LED_POWER1		4
+#define DNS323_GPIO_LED_POWER2		5
 #define DNS323_GPIO_OVERTEMP		6
 #define DNS323_GPIO_RTC			7
 #define DNS323_GPIO_POWER_OFF		8
@@ -237,11 +238,31 @@
  * GPIO LEDs (simple - doesn't use hardware blinking support)
  */
 
+#define ORION_BLINK_HALF_PERIOD 100 /* ms */
+
+static int dns323_gpio_blink_set(unsigned gpio,
+	unsigned long *delay_on, unsigned long *delay_off)
+{
+	static int value = 0;
+
+	if (!*delay_on && !*delay_off)
+		*delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
+
+	if (ORION_BLINK_HALF_PERIOD == *delay_on
+	    && ORION_BLINK_HALF_PERIOD == *delay_off) {
+		value = !value;
+		orion_gpio_set_blink(gpio, value);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 static struct gpio_led dns323_leds[] = {
 	{
 		.name = "power:blue",
-		.gpio = DNS323_GPIO_LED_POWER,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
+		.gpio = DNS323_GPIO_LED_POWER2,
+		.default_trigger = "timer",
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -256,6 +277,7 @@
 static struct gpio_led_platform_data dns323_led_data = {
 	.num_leds	= ARRAY_SIZE(dns323_leds),
 	.leds		= dns323_leds,
+	.gpio_blink_set = dns323_gpio_blink_set,
 };
 
 static struct platform_device dns323_gpio_leds = {
@@ -412,6 +434,14 @@
 	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
 	platform_device_register(&dns323_nor_flash);
 
+	/* The 5181 power LED is active low and requires
+	 * DNS323_GPIO_LED_POWER1 to also be low.
+	 */
+	if (dns323_dev_id() == MV88F5181_DEV_ID) {
+		dns323_leds[0].active_low = 1;
+		gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+	}
+
 	platform_device_register(&dns323_gpio_leds);
 
 	platform_device_register(&dns323_button_device);
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
new file mode 100644
index 0000000..8e569be
--- /dev/null
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -0,0 +1,276 @@
+/*
+ * arch/arm/mach-orion5x/ls_hgl-setup.c
+ *
+ * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * Linkstation LS-HGL Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LS_HGL_NOR_BOOT_BASE	0xf4000000
+#define LS_HGL_NOR_BOOT_SIZE	SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data ls_hgl_nor_flash_data = {
+	.width		= 1,
+};
+
+static struct resource ls_hgl_nor_flash_resource = {
+	.flags	= IORESOURCE_MEM,
+	.start	= LS_HGL_NOR_BOOT_BASE,
+	.end	= LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device ls_hgl_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &ls_hgl_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &ls_hgl_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data ls_hgl_eth_data = {
+	.phy_addr	= 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata ls_hgl_i2c_rtc = {
+	I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_LED_ALARM   2
+#define LS_HGL_GPIO_LED_INFO    3
+#define LS_HGL_GPIO_LED_FUNC    17
+#define LS_HGL_GPIO_LED_PWR     0
+
+
+static struct gpio_led ls_hgl_led_pins[] = {
+	{
+		.name	   = "alarm:red",
+		.gpio	   = LS_HGL_GPIO_LED_ALARM,
+		.active_low     = 1,
+	}, {
+		.name	   = "info:amber",
+		.gpio	   = LS_HGL_GPIO_LED_INFO,
+		.active_low     = 1,
+	}, {
+		.name	   = "func:blue:top",
+		.gpio	   = LS_HGL_GPIO_LED_FUNC,
+		.active_low     = 1,
+	}, {
+		.name	   = "power:blue:bottom",
+		.gpio	   = LS_HGL_GPIO_LED_PWR,
+	},
+};
+
+static struct gpio_led_platform_data ls_hgl_led_data = {
+	.leds	   = ls_hgl_led_pins,
+	.num_leds       = ARRAY_SIZE(ls_hgl_led_pins),
+};
+
+static struct platform_device ls_hgl_leds = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &ls_hgl_led_data,
+	},
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+#define LS_HGL_GPIO_KEY_FUNC       15
+#define LS_HGL_GPIO_KEY_POWER      8
+#define LS_HGL_GPIO_KEY_AUTOPOWER  10
+
+#define LS_HGL_SW_POWER     0x00
+#define LS_HGL_SW_AUTOPOWER 0x01
+
+static struct gpio_keys_button ls_hgl_buttons[] = {
+	{
+		.code	   = KEY_OPTION,
+		.gpio	   = LS_HGL_GPIO_KEY_FUNC,
+		.desc	   = "Function Button",
+		.active_low     = 1,
+	}, {
+		.type		= EV_SW,
+		.code	   = LS_HGL_SW_POWER,
+		.gpio	   = LS_HGL_GPIO_KEY_POWER,
+		.desc	   = "Power-on Switch",
+		.active_low     = 1,
+	}, {
+		.type		= EV_SW,
+		.code	   = LS_HGL_SW_AUTOPOWER,
+		.gpio	   = LS_HGL_GPIO_KEY_AUTOPOWER,
+		.desc	   = "Power-auto Switch",
+		.active_low     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data ls_hgl_button_data = {
+	.buttons	= ls_hgl_buttons,
+	.nbuttons       = ARRAY_SIZE(ls_hgl_buttons),
+};
+
+static struct platform_device ls_hgl_button_device = {
+	.name	   = "gpio-keys",
+	.id	     = -1,
+	.num_resources  = 0,
+	.dev	    = {
+		.platform_data  = &ls_hgl_button_data,
+	},
+};
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data ls_hgl_sata_data = {
+	.n_ports	= 2,
+};
+
+
+/*****************************************************************************
+ * Linkstation LS-HGL specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the Linkstation LS-HGL, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ *   to move the switch to ON position
+ */
+
+static void ls_hgl_power_off(void)
+{
+	arm_machine_restart('h', NULL);
+}
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_USB_POWER	9
+#define LS_HGL_GPIO_AUTO_POWER	10
+#define LS_HGL_GPIO_POWER	    8
+
+#define LS_HGL_GPIO_HDD_POWER	1
+
+static struct orion5x_mpp_mode ls_hgl_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO }, /* LED_PWR */
+	{  1, MPP_GPIO }, /* HDD_PWR */
+	{  2, MPP_GPIO }, /* LED_ALARM */
+	{  3, MPP_GPIO }, /* LED_INFO */
+	{  4, MPP_UNUSED },
+	{  5, MPP_UNUSED },
+	{  6, MPP_GPIO }, /* FAN_LCK */
+	{  7, MPP_GPIO }, /* INIT */
+	{  8, MPP_GPIO }, /* POWER */
+	{  9, MPP_GPIO }, /* USB_PWR */
+	{ 10, MPP_GPIO }, /* AUTO_POWER */
+	{ 11, MPP_UNUSED }, /* LED_ETH (dummy) */
+	{ 12, MPP_UNUSED },
+	{ 13, MPP_UNUSED },
+	{ 14, MPP_UNUSED },
+	{ 15, MPP_GPIO }, /* FUNC */
+	{ 16, MPP_UNUSED },
+	{ 17, MPP_GPIO }, /* LED_FUNC */
+	{ 18, MPP_UNUSED },
+	{ 19, MPP_UNUSED },
+	{ -1 },
+};
+
+static void __init ls_hgl_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(ls_hgl_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&ls_hgl_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&ls_hgl_sata_data);
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	orion5x_setup_dev_boot_win(LS_HGL_NOR_BOOT_BASE,
+				   LS_HGL_NOR_BOOT_SIZE);
+	platform_device_register(&ls_hgl_nor_flash);
+
+	platform_device_register(&ls_hgl_button_device);
+
+	platform_device_register(&ls_hgl_leds);
+
+	i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1);
+
+	/* enable USB power */
+	gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
+
+	/* register power-off method */
+	pm_power_off = ls_hgl_power_off;
+
+	pr_info("%s: finished\n", __func__);
+}
+
+MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
+	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= ls_hgl_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index c9bf6b8..c704f05 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/pci.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/leds.h>
@@ -19,12 +18,13 @@
 #include <linux/input.h>
 #include <linux/i2c.h>
 #include <linux/ata_platform.h>
-#include <asm/mach-types.h>
 #include <linux/gpio.h>
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
-#include "include/mach/system.h"
 
 /*****************************************************************************
  * Linkstation Mini Info
@@ -186,7 +186,7 @@
 
 static void lsmini_power_off(void)
 {
-	arch_reset(0, NULL);
+	arm_machine_restart('h', NULL);
 }
 
 
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index dee9218..38fbd0a 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -115,6 +115,11 @@
 	select CPU_PXA310
 	select HAVE_PWM
 
+config MACH_CAPC7117
+	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
+	select CPU_PXA320
+	select PXA3xx
+
 config ARCH_GUMSTIX
 	bool "Gumstix XScale 255 boards"
 	select PXA25x
@@ -417,6 +422,24 @@
 	  Say Y here if you intend to run this kernel on Palm Treo 680
 	  smartphone.
 
+config MACH_RAUMFELD_RC
+	bool "Raumfeld Controller"
+	select PXA3xx
+	select CPU_PXA300
+	select HAVE_PWM
+
+config MACH_RAUMFELD_CONNECTOR
+	bool "Raumfeld Connector"
+	select PXA3xx
+	select CPU_PXA300
+	select PXA_SSP
+
+config MACH_RAUMFELD_SPEAKER
+	bool "Raumfeld Speaker"
+	select PXA3xx
+	select CPU_PXA300
+	select PXA_SSP
+
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 	select SHARP_SCOOP
@@ -435,6 +458,7 @@
 config CORGI_SSP_DEPRECATED
 	bool
 	select PXA_SSP
+	select PXA_SSP_LEGACY
 	help
 	  This option will include corgi_ssp.c and corgi_lcd.c
 	  that corgi_ts.c and other legacy drivers (corgi_bl.c
@@ -446,6 +470,7 @@
 	select PXA25x
 	select SHARP_LOCOMO
 	select PXA_SSP
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_CORGI
 	bool "Enable Sharp SL-C700 (Corgi) Support"
@@ -492,6 +517,11 @@
 	select PXA25x
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_ICONTROL
+	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
+	select CPU_PXA320
+	select PXA3xx
+
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
@@ -629,6 +659,11 @@
 	help
 	  Enable support for PXA2xx SSP ports
 
+config PXA_SSP_LEGACY
+	bool
+	help
+	  Support of legacy SSP API
+
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 	depends on MACH_TOSA
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f64afda..86bc87b 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -48,6 +48,7 @@
 endif
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
+obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
@@ -82,6 +83,7 @@
 obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
+obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
 obj-$(CONFIG_MACH_E330)		+= e330.o
 obj-$(CONFIG_MACH_E350)		+= e350.o
@@ -89,6 +91,9 @@
 obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
+obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 
 # Support for blinky lights
 led-y := leds.o
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 4bd10a1..993d75e 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -288,7 +288,7 @@
 }
 
 module_param(panel_type, uint, 0);
-MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+MODULE_PARM_DESC(panel_type, "Select the panel type: 37, 6, 97");
 
 MODULE_DESCRIPTION("board driver for am300 epd kit");
 MODULE_AUTHOR("Jaya Kumar");
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index b8cd07c..f3b5ace 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -132,6 +132,14 @@
 		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
 }
 
+static unsigned long balloon3_ac97_pin_config[] = {
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO113_AC97_nRESET,
+};
+
 static void balloon3_backlight_power(int on)
 {
 	pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
@@ -140,26 +148,7 @@
 
 static unsigned long balloon3_lcd_pin_config[] = {
 	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	GPIO99_GPIO,		/* Backlight */
 };
@@ -311,8 +300,10 @@
 	pxa_set_stuart_info(NULL);
 
 	pxa_set_i2c_info(NULL);
-	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
+	if (balloon3_has(BALLOON3_FEATURE_AUDIO)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
 		pxa_set_ac97_info(NULL);
+	}
 
 	if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
 		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
new file mode 100644
index 0000000..aae5446
--- /dev/null
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-pxa/capc7117.c
+ *
+ * Support for the Embedian CAPC-7117 Evaluation Kit
+ * based on the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ *             rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ *             Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ *             rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa320.h>
+#include <mach/mxm8x10.h>
+
+#include "generic.h"
+
+/* IDE (PATA) Support */
+static struct pata_platform_info pata_platform_data = {
+	.ioport_shift = 1
+};
+
+static struct resource capc7117_ide_resources[] = {
+	[0] = {
+	       .start = 0x11000020,
+	       .end = 0x1100003f,
+	       .flags = IORESOURCE_MEM
+	},
+	[1] = {
+	       .start = 0x1100001c,
+	       .end = 0x1100001c,
+	       .flags = IORESOURCE_MEM
+	},
+	[2] = {
+	       .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
+	}
+};
+
+static struct platform_device capc7117_ide_device = {
+	.name = "pata_platform",
+	.num_resources = ARRAY_SIZE(capc7117_ide_resources),
+	.resource = capc7117_ide_resources,
+	.dev = {
+		.platform_data = &pata_platform_data,
+		.coherent_dma_mask = ~0		/* grumble */
+	}
+};
+
+static void __init capc7117_ide_init(void)
+{
+	platform_device_register(&capc7117_ide_device);
+}
+
+/* TI16C752 UART support */
+#define	TI16C752_FLAGS		(UPF_BOOT_AUTOCONF | \
+					UPF_IOREMAP | \
+					UPF_BUGGY_UART | \
+					UPF_SKIP_TEST)
+#define	TI16C752_UARTCLK	(22118400)
+static struct plat_serial8250_port ti16c752_platform_data[] = {
+	[0] = {
+	       .mapbase = 0x14000000,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[1] = {
+	       .mapbase = 0x14000040,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[2] = {
+	       .mapbase = 0x14000080,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[3] = {
+	       .mapbase = 0x140000c0,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[4] = {
+	       /* end of array */
+	}
+};
+
+static struct platform_device ti16c752_device = {
+	.name = "serial8250",
+	.id = PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data = ti16c752_platform_data
+	}
+};
+
+static void __init capc7117_uarts_init(void)
+{
+	platform_device_register(&ti16c752_device);
+}
+
+static void __init capc7117_init(void)
+{
+	/* Init CoM */
+	mxm_8x10_barebones_init();
+
+	/* Init evaluation board peripherals */
+	mxm_8x10_ac97_init();
+	mxm_8x10_usb_host_init();
+	mxm_8x10_mmc_init();
+
+	capc7117_uarts_init();
+	capc7117_ide_init();
+}
+
+MACHINE_START(CAPC7117,
+	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
+	.phys_io = 0x40000000,
+	.boot_params = 0xa0000100,
+	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io = pxa_map_io,
+	.init_irq = pxa3xx_init_irq,
+	.timer = &pxa_timer,
+	.init_machine = capc7117_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 253fd76..f1a7703 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -50,26 +50,7 @@
 	GPIO47_STUART_TXD,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* SSP1 */
 	GPIO23_SSP1_SCLK,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index eea78b6..a9926bb 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -71,26 +71,7 @@
 	GPIO111_MMC_DAT_3,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* I2C */
 	GPIO117_I2C_SCL,
@@ -195,33 +176,57 @@
 	},
 };
 
-static unsigned long save_lcd_regs[10];
+static unsigned long cmx270_marathon_on[] = {
+	GPIO58_GPIO,
+	GPIO59_GPIO,
+	GPIO60_GPIO,
+	GPIO61_GPIO,
+	GPIO62_GPIO,
+	GPIO63_GPIO,
+	GPIO64_GPIO,
+	GPIO65_GPIO,
+	GPIO66_GPIO,
+	GPIO67_GPIO,
+	GPIO68_GPIO,
+	GPIO69_GPIO,
+	GPIO70_GPIO,
+	GPIO71_GPIO,
+	GPIO72_GPIO,
+	GPIO73_GPIO,
+	GPIO74_GPIO,
+	GPIO75_GPIO,
+	GPIO76_GPIO,
+	GPIO77_GPIO,
+};
+
+static unsigned long cmx270_marathon_off[] = {
+	GPIOxx_LCD_TFT_16BPP,
+};
 
 static int cmx270_marathon_probe(struct fb_info *fb)
 {
-	/* save PXA-270 pin settings before enabling 2700G */
-	save_lcd_regs[0] = GPDR1;
-	save_lcd_regs[1] = GPDR2;
-	save_lcd_regs[2] = GAFR1_U;
-	save_lcd_regs[3] = GAFR2_L;
-	save_lcd_regs[4] = GAFR2_U;
+	int gpio, err;
 
-	/* Disable PXA-270 on-chip controller driving pins */
-	GPDR1 &= ~(0xfc000000);
-	GPDR2 &= ~(0x00c03fff);
-	GAFR1_U &= ~(0xfff00000);
-	GAFR2_L &= ~(0x0fffffff);
-	GAFR2_U &= ~(0x0000f000);
+	for (gpio = 58; gpio <= 77; gpio++) {
+		err = gpio_request(gpio, "LCD");
+		if (err)
+			return err;
+		gpio_direction_input(gpio);
+	}
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
 	return 0;
 }
 
 static int cmx270_marathon_remove(struct fb_info *fb)
 {
-	GPDR1 =   save_lcd_regs[0];
-	GPDR2 =   save_lcd_regs[1];
-	GAFR1_U = save_lcd_regs[2];
-	GAFR2_L = save_lcd_regs[3];
-	GAFR2_U = save_lcd_regs[4];
+	int gpio;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));
+
+	for (gpio = 58; gpio <= 77; gpio++)
+		gpio_free(gpio);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 7873fa3..161fc2d 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -59,7 +59,7 @@
 static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	/* clear our parent irq */
-	GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio);
+	desc->chip->ack(irq);
 
 	it8152_irq_demux(irq, desc);
 }
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index a5ee707..1d9bc11 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -204,7 +204,7 @@
 	ssp_machinfo = machinfo;
 }
 
-static int __init corgi_ssp_probe(struct platform_device *dev)
+static int __devinit corgi_ssp_probe(struct platform_device *dev)
 {
 	int ret;
 
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 94b23a9..d578021 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -134,6 +134,12 @@
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* Audio power control */
 	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
 	GPIO40_GPIO,  /* Mic amp power */
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 5eccbce..af83caa 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -132,6 +132,12 @@
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* Audio power control */
 	GPIO4_GPIO,  /* Headphone amp power */
 	GPIO7_GPIO,  /* Speaker amp power */
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index aad129b..8ea97bf 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -35,6 +35,14 @@
 
 /* ------------------------ e800 LCD definitions ------------------------- */
 
+static unsigned long e800_pin_config[] __initdata = {
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+};
+
 static struct w100_gen_regs e800_lcd_regs = {
 	.lcd_format =            0x00008003,
 	.lcdd_cntl1 =            0x02a00000,
@@ -195,6 +203,7 @@
 
 static void __init e800_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index c8a01bc..aab04f3 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -109,26 +109,7 @@
 	GPIO111_MMC_DAT_3,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* QCI */
 	GPIO84_CIF_FV,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
new file mode 100644
index 0000000..771137f
--- /dev/null
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -0,0 +1,202 @@
+/*
+ * linux/arch/arm/mach-pxa/icontrol.c
+ *
+ * Support for the iControl and SafeTcam platforms from TMT Services
+ * using the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa320.h>
+#include <mach/mxm8x10.h>
+
+#include <linux/spi/spi.h>
+#include <mach/pxa2xx_spi.h>
+#include <linux/can/platform/mcp251x.h>
+
+#include "generic.h"
+
+#define ICONTROL_MCP251x_nCS1	(15)
+#define ICONTROL_MCP251x_nCS2	(16)
+#define ICONTROL_MCP251x_nCS3	(17)
+#define ICONTROL_MCP251x_nCS4	(24)
+
+#define ICONTROL_MCP251x_nIRQ1	(74)
+#define ICONTROL_MCP251x_nIRQ2	(75)
+#define ICONTROL_MCP251x_nIRQ3	(76)
+#define ICONTROL_MCP251x_nIRQ4	(77)
+
+static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS1
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS2
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS3
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS4
+};
+
+static struct mcp251x_platform_data mcp251x_info = {
+	.oscillator_frequency = 16E6,
+	.model                = CAN_MCP251X_MCP2515,
+	.board_specific_setup = NULL,
+	.power_enable         = NULL,
+	.transceiver_enable   = NULL
+};
+
+static struct spi_board_info mcp251x_board_info[] = {
+	{
+		.modalias        = "mcp251x",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 3,
+		.chip_select     = 0,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info1,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
+	},
+	{
+		.modalias        = "mcp251x",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 3,
+		.chip_select     = 1,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info2,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
+	},
+	{
+		.modalias        = "mcp251x",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 4,
+		.chip_select     = 0,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info3,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
+	},
+	{
+		.modalias        = "mcp251x",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 4,
+		.chip_select     = 1,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info4,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ4)
+	}
+};
+
+static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
+	.clock_enable   = CKEN_SSP3,
+	.num_chipselect = 2,
+	.enable_dma     = 1
+};
+
+static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
+	.clock_enable   = CKEN_SSP4,
+	.num_chipselect = 2,
+	.enable_dma     = 1
+};
+
+struct platform_device pxa_spi_ssp3 = {
+	.name          = "pxa2xx-spi",
+	.id            = 3,
+	.dev           = {
+		.platform_data = &pxa_ssp3_spi_master_info,
+	}
+};
+
+struct platform_device pxa_spi_ssp4 = {
+	.name          = "pxa2xx-spi",
+	.id            = 4,
+	.dev           = {
+		.platform_data = &pxa_ssp4_spi_master_info,
+	}
+};
+
+static struct platform_device *icontrol_spi_devices[] __initdata = {
+	&pxa_spi_ssp3,
+	&pxa_spi_ssp4,
+};
+
+static mfp_cfg_t mfp_can_cfg[] __initdata = {
+	/* CAN CS lines */
+	GPIO15_GPIO,
+	GPIO16_GPIO,
+	GPIO17_GPIO,
+	GPIO24_GPIO,
+
+	/* SPI (SSP3) lines */
+	GPIO89_SSP3_SCLK,
+	GPIO91_SSP3_TXD,
+	GPIO92_SSP3_RXD,
+
+	/* SPI (SSP4) lines */
+	GPIO93_SSP4_SCLK,
+	GPIO95_SSP4_TXD,
+	GPIO96_SSP4_RXD,
+
+	/* CAN nIRQ lines */
+	GPIO74_GPIO | MFP_LPM_EDGE_RISE,
+	GPIO75_GPIO | MFP_LPM_EDGE_RISE,
+	GPIO76_GPIO | MFP_LPM_EDGE_RISE,
+	GPIO77_GPIO | MFP_LPM_EDGE_RISE
+};
+
+static void __init icontrol_can_init(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
+	platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
+	spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
+}
+
+static void __init icontrol_init(void)
+{
+	mxm_8x10_barebones_init();
+	mxm_8x10_usb_host_init();
+	mxm_8x10_mmc_init();
+
+	icontrol_can_init();
+}
+
+MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= icontrol_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 5c9e11d..bc78c4d 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -47,25 +47,7 @@
 
 static unsigned long idp_pin_config[] __initdata = {
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_DSTN_16BPP,
 
 	/* BTUART */
 	GPIO42_BTUART_RXD,
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 5b0862d..b2f878b 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -64,7 +64,6 @@
 	GPIO116_GPIO,			/* CC_CCA */
 	GPIO0_GPIO,			/* CC_FIFOP */
 	GPIO16_GPIO,			/* CCSFD */
-	GPIO39_GPIO,			/* CSn */
 	GPIO115_GPIO,			/* Power enable */
 
 	/* I2C */
@@ -72,7 +71,7 @@
 	GPIO118_I2C_SDA,
 
 	/* SSP 3 - 802.15.4 radio */
-	GPIO39_GPIO, 			/* Chip Select */
+	GPIO39_GPIO,			/* Chip Select */
 	GPIO34_SSP3_SCLK,
 	GPIO35_SSP3_TXD,
 	GPIO41_SSP3_RXD,
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index bfec09b..1a74106 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -129,6 +129,16 @@
 #define CPLD_AROUTING_LOONR2INT_BIT    6
 #define CPLD_AROUTING_LOONR2EXT_BIT    7
 
+/* Balloon3 Interrupts */
+#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
+
+#define BALLOON3_BP_CF_NRDY_IRQ	BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ	BALLOON3_IRQ(1)
+
+#define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+
 extern int balloon3_has(enum balloon3_features feature);
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index e741bf1..7515757 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -314,7 +314,6 @@
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
 #define pcibios_assign_all_busses()	1
-#define HAVE_ARCH_PCI_SET_DMA_MASK	1
 #endif
 
 
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 3677a9a..ffc8314 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -135,82 +135,6 @@
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
 #endif
 
-#define IRQ_SA1111_START	(IRQ_BOARD_END)
-#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
-#define SSPXMTINT		(IRQ_BOARD_END + 24)
-#define SSPRCVINT		(IRQ_BOARD_END + 25)
-#define SSPROR			(IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
-#define AUDTFSR			(IRQ_BOARD_END + 36)
-#define AUDRFSR			(IRQ_BOARD_END + 37)
-#define AUDTUR			(IRQ_BOARD_END + 38)
-#define AUDROR			(IRQ_BOARD_END + 39)
-#define AUDDTS			(IRQ_BOARD_END + 40)
-#define AUDRDD			(IRQ_BOARD_END + 41)
-#define AUDSTO			(IRQ_BOARD_END + 42)
-#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
-#define IRQ_HCIM		(IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
-
 /*
  * Figure out the MAX IRQ number.
  *
@@ -219,89 +143,16 @@
  * Otherwise, we have the standard IRQs only.
  */
 #ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#define NR_IRQS			(IRQ_BOARD_END + 55)
 #elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
 #define NR_IRQS			(IRQ_BOARD_END)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
 #endif
 
-/*
- * Board specific IRQs.  Define them here.
- * Do not surround them with ifdefs.
- */
-#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
-#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
-#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
-
-#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ		LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
-#define LPD270_AC97_IRQ		LPD270_IRQ(4)
-
-#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
-#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
-
-/* Balloon3 Interrupts */
-#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
-
-#define BALLOON3_BP_CF_NRDY_IRQ	BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ	BALLOON3_IRQ(1)
-
-#define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
-#define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
-
-/* ITE8152 irqs */
 /* add IT8152 IRQs beyond BOARD_END */
 #ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
-
-/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
-#define IT8152_LD_IRQ_COUNT     9
-#define IT8152_LP_IRQ_COUNT     16
-#define IT8152_PD_IRQ_COUNT     15
-
-/* Priorities: */
-#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
-#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
-#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
-
-#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+#define IT8152_LAST_IRQ         (IRQ_BOARD_END + 40)
 
 #if NR_IRQS < (IT8152_LAST_IRQ+1)
 #undef NR_IRQS
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
index f89fb71..0e6440c 100644
--- a/arch/arm/mach-pxa/include/mach/lpd270.h
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -34,5 +34,9 @@
 #define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
 #define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
 
+#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ		LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
+#define LPD270_AC97_IRQ		LPD270_IRQ(4)
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 751b748..a0d4247 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -34,6 +34,17 @@
 #define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
 #define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
 
+/* Board specific IRQs */
+#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
+#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
+#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
+
 #ifndef __ASSEMBLY__
 extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 3461c43..86e623a 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -117,4 +117,21 @@
 #define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
 #define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
 
+/* board specific IRQs */
+#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
+#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
+
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 9c78785..cafadc3 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -190,4 +190,36 @@
 #define GPIO89_AC97_nRESET	MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
 #endif	/* CONFIG_CPU_PXA26x */
 
+/* commonly used pin configurations */
+#define GPIOxx_LCD_16BPP	\
+	GPIO58_LCD_LDD_0,	\
+	GPIO59_LCD_LDD_1,	\
+	GPIO60_LCD_LDD_2,	\
+	GPIO61_LCD_LDD_3,	\
+	GPIO62_LCD_LDD_4,	\
+	GPIO63_LCD_LDD_5,	\
+	GPIO64_LCD_LDD_6,	\
+	GPIO65_LCD_LDD_7,	\
+	GPIO66_LCD_LDD_8,	\
+	GPIO67_LCD_LDD_9,	\
+	GPIO68_LCD_LDD_10,	\
+	GPIO69_LCD_LDD_11,	\
+	GPIO70_LCD_LDD_12,	\
+	GPIO71_LCD_LDD_13,	\
+	GPIO72_LCD_LDD_14,	\
+	GPIO73_LCD_LDD_15
+
+#define GPIOxx_LCD_DSTN_16BPP	\
+	GPIOxx_LCD_16BPP,	\
+	GPIO74_LCD_FCLK,	\
+	GPIO75_LCD_LCLK,	\
+	GPIO76_LCD_PCLK
+
+#define GPIOxx_LCD_TFT_16BPP	\
+	GPIOxx_LCD_16BPP,	\
+	GPIO74_LCD_FCLK,	\
+	GPIO75_LCD_LCLK,	\
+	GPIO76_LCD_PCLK,	\
+	GPIO77_LCD_BIAS
+
 #endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index 6543c05..ec0f0b0 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -434,5 +434,32 @@
 #define GPIO112_nMSINS		MFP_CFG_IN(GPIO112, AF2)
 #define GPIO32_MSSCLK		MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
 
+/* commonly used pin configurations */
+#define GPIOxx_LCD_16BPP	\
+	GPIO58_LCD_LDD_0,	\
+	GPIO59_LCD_LDD_1,	\
+	GPIO60_LCD_LDD_2,	\
+	GPIO61_LCD_LDD_3,	\
+	GPIO62_LCD_LDD_4,	\
+	GPIO63_LCD_LDD_5,	\
+	GPIO64_LCD_LDD_6,	\
+	GPIO65_LCD_LDD_7,	\
+	GPIO66_LCD_LDD_8,	\
+	GPIO67_LCD_LDD_9,	\
+	GPIO68_LCD_LDD_10,	\
+	GPIO69_LCD_LDD_11,	\
+	GPIO70_LCD_LDD_12,	\
+	GPIO71_LCD_LDD_13,	\
+	GPIO72_LCD_LDD_14,	\
+	GPIO73_LCD_LDD_15
+
+#define GPIOxx_LCD_TFT_16BPP	\
+	GPIOxx_LCD_16BPP,	\
+	GPIO74_LCD_FCLK,	\
+	GPIO75_LCD_LCLK,	\
+	GPIO76_LCD_PCLK,	\
+	GPIO77_LCD_BIAS
+
+
 extern int keypad_set_wake(unsigned int on);
 #endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mxm8x10.h b/arch/arm/mach-pxa/include/mach/mxm8x10.h
new file mode 100644
index 0000000..ffa1566
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mxm8x10.h
@@ -0,0 +1,21 @@
+#ifndef __MACH_MXM_8X10_H
+#define __MACH_MXM_8X10_H
+
+#define MXM_8X10_ETH_PHYS	0x13000000
+
+#if defined(CONFIG_MMC)
+
+#define MXM_8X10_SD_nCD (72)
+#define MXM_8X10_SD_WP (84)
+
+extern void mxm_8x10_mmc_init(void);
+#else
+static inline void mxm_8x10_mmc_init(void) {}
+#endif
+
+extern void mxm_8x10_usb_host_init(void);
+extern void mxm_8x10_ac97_init(void);
+
+extern void mxm_8x10_barebones_init(void);
+
+#endif /* __MACH_MXM_8X10_H */
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 4dcd2e8..0408326 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -23,6 +23,13 @@
  * Definitions of CPU card resources only
  */
 
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
+
 /* I2C RTC */
 #define PCM027_RTC_IRQ_GPIO	0
 #define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
index cb5cb76..be1be5b 100644
--- a/arch/arm/mach-pxa/include/mach/ssp.h
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
@@ -46,6 +46,7 @@
 	int		drcmr_tx;
 };
 
+#ifdef CONFIG_PXA_SSP_LEGACY
 /*
  * SSP initialisation flags
  */
@@ -78,6 +79,7 @@
 int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
 int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
 void ssp_exit(struct ssp_dev *dev);
+#endif /* CONFIG_PXA_SSP_LEGACY */
 
 /**
  * ssp_write_reg - Write to a SSP register
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 237734b..5ef91d9 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -10,20 +10,41 @@
  */
 
 #include <linux/serial_reg.h>
-#include <mach/regs-uart.h>
 #include <asm/mach-types.h>
 
-#define __REG(x)       ((volatile unsigned long *)x)
+#define FFUART_BASE	(0x40100000)
+#define BTUART_BASE	(0x40200000)
+#define STUART_BASE	(0x40700000)
 
-static volatile unsigned long *UART = FFUART;
+static unsigned long uart_base = FFUART_BASE;
+static unsigned int uart_shift = 2;
+static unsigned int uart_is_pxa = 1;
+
+static inline unsigned char uart_read(int offset)
+{
+	return *(volatile unsigned char *)(uart_base + (offset << uart_shift));
+}
+
+static inline void uart_write(unsigned char val, int offset)
+{
+	*(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val;
+}
+
+static inline int uart_is_enabled(void)
+{
+	/* assume enabled by default for non-PXA uarts */
+	return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1;
+}
 
 static inline void putc(char c)
 {
-	if (!(UART[UART_IER] & IER_UUE))
+	if (!uart_is_enabled())
 		return;
-	while (!(UART[UART_LSR] & LSR_TDRQ))
+
+	while (!(uart_read(UART_LSR) & UART_LSR_THRE))
 		barrier();
-	UART[UART_TX] = c;
+
+	uart_write(c, UART_TX);
 }
 
 /*
@@ -38,7 +59,13 @@
 	if (machine_is_littleton() || machine_is_intelmote2()
 	    || machine_is_csb726() || machine_is_stargate2()
 	    || machine_is_cm_x300() || machine_is_balloon3())
-		UART = STUART;
+		uart_base = STUART_BASE;
+
+	if (machine_is_arcom_zeus()) {
+		uart_base = 0x10000000;	/* nCS4 */
+		uart_shift = 1;
+		uart_is_pxa = 0;
+	}
 }
 
 /*
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index c387046..6e11997 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -58,6 +58,8 @@
 #define ZEUS_EXT1_GPIO(x)	(ZEUS_EXT1_GPIO_BASE + (x))
 #define ZEUS_USER_GPIO(x)	(ZEUS_USER_GPIO_BASE + (x))
 
+#define	ZEUS_CAN_SHDN_GPIO	ZEUS_EXT1_GPIO(2)
+
 /*
  * CPLD registers:
  * Only 4 registers, but spreaded over a 32MB address space.
@@ -68,7 +70,6 @@
 #define ZEUS_CPLD_VERSION	(ZEUS_CPLD + 0x0000)
 #define ZEUS_CPLD_ISA_IRQ	(ZEUS_CPLD + 0x1000)
 #define ZEUS_CPLD_CONTROL	(ZEUS_CPLD + 0x2000)
-#define ZEUS_CPLD_EXTWDOG	(ZEUS_CPLD + 0x3000)
 
 /* CPLD register bits */
 #define ZEUS_CPLD_CONTROL_CF_RST        0x01
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1373c22..d279507 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -83,6 +83,10 @@
 	GPIO89_USBH1_PEN,
 
 	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
 	GPIO45_AC97_SYSCLK,
 
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
@@ -121,7 +125,7 @@
 
 	pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
 	do {
-		GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
+		desc->chip->ack(irq);	/* clear useless edge notification */
 		if (likely(pending)) {
 			irq = LPD270_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 98ee7e59..63d65a2 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -66,26 +66,14 @@
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* LCD - 16bpp DSTN */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_DSTN_16BPP,
 
 	/* BTUART */
 	GPIO42_BTUART_RXD,
@@ -158,7 +146,7 @@
 {
 	unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
 	do {
-		GEDR(0) = GPIO_bit(0);	/* clear our parent irq */
+		desc->chip->ack(irq);	/* clear our parent irq */
 		if (likely(pending)) {
 			irq = LUBBOCK_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
@@ -240,11 +228,18 @@
 	},
 };
 
+static struct sa1111_platform_data sa1111_info = {
+	.irq_base	= IRQ_BOARD_END,
+};
+
 static struct platform_device sa1111_device = {
 	.name		= "sa1111",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(sa1111_resources),
 	.resource	= sa1111_resources,
+	.dev		= {
+		.platform_data	= &sa1111_info,
+	},
 };
 
 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 189f330..e81dd0c 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -88,26 +88,7 @@
 	GPIO112_MMC_CMD,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* QCI */
 	GPIO12_CIF_DD_7,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 851ee0f..5543c64 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -60,26 +60,7 @@
 	GPIO15_nCS_1,
 
 	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 	GPIO16_PWM0_OUT,	/* Backlight */
 
 	/* MMC */
@@ -107,6 +88,10 @@
 	GPIO57_nIOIS16,
 
 	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
 	GPIO45_AC97_SYSCLK,
 
 	/* Keypad */
@@ -162,7 +147,7 @@
 {
 	unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
 	do {
-		GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
+		desc->chip->ack(irq);	/* clear useless edge notification */
 		if (likely(pending)) {
 			irq = MAINSTONE_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2466a44..843fcca 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -86,25 +86,7 @@
 	MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* QCI */
 	GPIO12_CIF_DD_7,
@@ -155,6 +137,10 @@
 	GPIO41_FFUART_RTS,
 
 	/* Sound */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
 	GPIO89_AC97_SYSCLK,
 	MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
 
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
new file mode 100644
index 0000000..8c9c6f0
--- /dev/null
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -0,0 +1,474 @@
+/*
+ * linux/arch/arm/mach-pxa/mxm8x10.c
+ *
+ * Support for the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ *             rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ * 	       Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ *             rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_8250.h>
+#include <linux/dm9000.h>
+#include <linux/gpio.h>
+
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
+
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa320.h>
+
+#include <mach/mxm8x10.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* GPIO pin definition
+
+External device stuff   - Leave unconfigured for now...
+---------------------
+GPIO0   -   DREQ    (External DMA Request)
+GPIO3   -   nGCS2   (External Chip Select) Where is nGCS0; nGCS1; nGCS4; nGCS5 ?
+GPIO4   -   nGCS3
+GPIO15  -   EXT_GPIO1
+GPIO16  -   EXT_GPIO2
+GPIO17  -   EXT_GPIO3
+GPIO24  -   EXT_GPIO4
+GPIO25  -   EXT_GPIO5
+GPIO26  -   EXT_GPIO6
+GPIO27  -   EXT_GPIO7
+GPIO28  -   EXT_GPIO8
+GPIO29  -   EXT_GPIO9
+GPIO30  -   EXT_GPIO10
+GPIO31  -   EXT_GPIO11
+GPIO57  -   EXT_GPIO12
+GPIO74  -   EXT_IRQ1
+GPIO75  -   EXT_IRQ2
+GPIO76  -   EXT_IRQ3
+GPIO77  -   EXT_IRQ4
+GPIO78  -   EXT_IRQ5
+GPIO79  -   EXT_IRQ6
+GPIO80  -   EXT_IRQ7
+GPIO81  -   EXT_IRQ8
+GPIO87  -   VCCIO_PWREN (External Device PWREN)
+
+Dallas 1-Wire   - Leave unconfigured for now...
+-------------
+GPIO0_2 -   DS - 1Wire
+
+Ethernet
+--------
+GPIO1   -   DM9000 PWR
+GPIO9   -   DM9K_nIRQ
+GPIO36  -   DM9K_RESET
+
+Keypad  - Leave unconfigured by for now...
+------
+GPIO1_2 -   KP_DKIN0
+GPIO5_2 -   KP_MKOUT7
+GPIO82  -   KP_DKIN1
+GPIO85  -   KP_DKIN2
+GPIO86  -   KP_DKIN3
+GPIO113 -   KP_MKIN0
+GPIO114 -   KP_MKIN1
+GPIO115 -   KP_MKIN2
+GPIO116 -   KP_MKIN3
+GPIO117 -   KP_MKIN4
+GPIO118 -   KP_MKIN5
+GPIO119 -   KP_MKIN6
+GPIO120 -   KP_MKIN7
+GPIO121 -   KP_MKOUT0
+GPIO122 -   KP_MKOUT1
+GPIO122 -   KP_MKOUT2
+GPIO123 -   KP_MKOUT3
+GPIO124 -   KP_MKOUT4
+GPIO125 -   KP_MKOUT5
+GPIO127 -   KP_MKOUT6
+
+Data Bus    - Leave unconfigured for now...
+--------
+GPIO2   -   nWait (Data Bus)
+
+USB Device
+----------
+GPIO4_2 -   USBD_PULLUP
+GPIO10  -   UTM_CLK (USB Device UTM Clk)
+GPIO49  -   USB 2.0 Device UTM_DATA0
+GPIO50  -   USB 2.0 Device UTM_DATA1
+GPIO51  -   USB 2.0 Device UTM_DATA2
+GPIO52  -   USB 2.0 Device UTM_DATA3
+GPIO53  -   USB 2.0 Device UTM_DATA4
+GPIO54  -   USB 2.0 Device UTM_DATA5
+GPIO55  -   USB 2.0 Device UTM_DATA6
+GPIO56  -   USB 2.0 Device UTM_DATA7
+GPIO58  -   UTM_RXVALID (USB 2.0 Device)
+GPIO59  -   UTM_RXACTIVE (USB 2.0 Device)
+GPIO60  -   UTM_RXERROR
+GPIO61  -   UTM_OPMODE0
+GPIO62  -   UTM_OPMODE1
+GPIO71  -   USBD_INT    (USB Device?)
+GPIO73  -   UTM_TXREADY (USB 2.0 Device)
+GPIO83  -   UTM_TXVALID (USB 2.0 Device)
+GPIO98  -   UTM_RESET   (USB 2.0 device)
+GPIO99  -   UTM_XCVR_SELECT
+GPIO100 -   UTM_TERM_SELECT
+GPIO101 -   UTM_SUSPENDM_X
+GPIO102 -   UTM_LINESTATE0
+GPIO103 -   UTM_LINESTATE1
+
+Card-Bus Interface  - Leave unconfigured for now...
+------------------
+GPIO5   -   nPIOR (I/O space output enable)
+GPIO6   -   nPIOW (I/O space write enable)
+GPIO7   -   nIOS16 (Input from I/O space telling size of data bus)
+GPIO8   -   nPWAIT (Input for inserting wait states)
+
+LCD
+---
+GPIO6_2     -   LDD0
+GPIO7_2     -   LDD1
+GPIO8_2     -   LDD2
+GPIO9_2     -   LDD3
+GPIO11_2    -   LDD5
+GPIO12_2    -   LDD6
+GPIO13_2    -   LDD7
+GPIO14_2    -   VSYNC
+GPIO15_2    -   HSYNC
+GPIO16_2    -   VCLK
+GPIO17_2    -   HCLK
+GPIO18_2    -   VDEN
+GPIO63      -   LDD8    (CPU LCD)
+GPIO64      -   LDD9    (CPU LCD)
+GPIO65      -   LDD10   (CPU LCD)
+GPIO66      -   LDD11   (CPU LCD)
+GPIO67      -   LDD12   (CPU LCD)
+GPIO68      -   LDD13   (CPU LCD)
+GPIO69      -   LDD14   (CPU LCD)
+GPIO70      -   LDD15   (CPU LCD)
+GPIO88      -   VCCLCD_PWREN (LCD Panel PWREN)
+GPIO97      -   BACKLIGHT_EN
+GPIO104     -   LCD_PWREN
+
+PWM   - Leave unconfigured for now...
+---
+GPIO11  -   PWM0
+GPIO12  -   PWM1
+GPIO13  -   PWM2
+GPIO14  -   PWM3
+
+SD-CARD
+-------
+GPIO18  -   SDDATA0
+GPIO19  -   SDDATA1
+GPIO20  -   SDDATA2
+GPIO21  -   SDDATA3
+GPIO22  -   SDCLK
+GPIO23  -   SDCMD
+GPIO72  -   SD_WP
+GPIO84  -   SD_nIRQ_CD  (SD-Card)
+
+I2C
+---
+GPIO32  -   I2CSCL
+GPIO33  -   I2CSDA
+
+AC97
+----
+GPIO35  -   AC97_SDATA_IN
+GPIO37  -   AC97_SDATA_OUT
+GPIO38  -   AC97_SYNC
+GPIO39  -   AC97_BITCLK
+GPIO40  -   AC97_nRESET
+
+UART1
+-----
+GPIO41  -   UART_RXD1
+GPIO42  -   UART_TXD1
+GPIO43  -   UART_CTS1
+GPIO44  -   UART_DCD1
+GPIO45  -   UART_DSR1
+GPIO46  -   UART_nRI1
+GPIO47  -   UART_DTR1
+GPIO48  -   UART_RTS1
+
+UART2
+-----
+GPIO109 -   RTS2
+GPIO110 -   RXD2
+GPIO111 -   TXD2
+GPIO112 -   nCTS2
+
+UART3
+-----
+GPIO105 -   nCTS3
+GPIO106 -   nRTS3
+GPIO107 -   TXD3
+GPIO108 -   RXD3
+
+SSP3    - Leave unconfigured for now...
+----
+GPIO89  -   SSP3_CLK
+GPIO90  -   SSP3_SFRM
+GPIO91  -   SSP3_TXD
+GPIO92  -   SSP3_RXD
+
+SSP4
+GPIO93  -   SSP4_CLK
+GPIO94  -   SSP4_SFRM
+GPIO95  -   SSP4_TXD
+GPIO96  -   SSP4_RXD
+*/
+
+static mfp_cfg_t mfp_cfg[] __initdata = {
+	/* USB */
+	GPIO10_UTM_CLK,
+	GPIO49_U2D_PHYDATA_0,
+	GPIO50_U2D_PHYDATA_1,
+	GPIO51_U2D_PHYDATA_2,
+	GPIO52_U2D_PHYDATA_3,
+	GPIO53_U2D_PHYDATA_4,
+	GPIO54_U2D_PHYDATA_5,
+	GPIO55_U2D_PHYDATA_6,
+	GPIO56_U2D_PHYDATA_7,
+	GPIO58_UTM_RXVALID,
+	GPIO59_UTM_RXACTIVE,
+	GPIO60_U2D_RXERROR,
+	GPIO61_U2D_OPMODE0,
+	GPIO62_U2D_OPMODE1,
+	GPIO71_GPIO, /* USBD_INT */
+	GPIO73_UTM_TXREADY,
+	GPIO83_U2D_TXVALID,
+	GPIO98_U2D_RESET,
+	GPIO99_U2D_XCVR_SEL,
+	GPIO100_U2D_TERM_SEL,
+	GPIO101_U2D_SUSPEND,
+	GPIO102_UTM_LINESTATE_0,
+	GPIO103_UTM_LINESTATE_1,
+	GPIO4_2_GPIO | MFP_PULL_HIGH, /* UTM_PULLUP */
+
+	/* DM9000 */
+	GPIO1_GPIO,
+	GPIO9_GPIO,
+	GPIO36_GPIO,
+
+	/* AC97 */
+	GPIO35_AC97_SDATA_IN_0,
+	GPIO37_AC97_SDATA_OUT,
+	GPIO38_AC97_SYNC,
+	GPIO39_AC97_BITCLK,
+	GPIO40_AC97_nACRESET,
+
+	/* UARTS */
+	GPIO41_UART1_RXD,
+	GPIO42_UART1_TXD,
+	GPIO43_UART1_CTS,
+	GPIO44_UART1_DCD,
+	GPIO45_UART1_DSR,
+	GPIO46_UART1_RI,
+	GPIO47_UART1_DTR,
+	GPIO48_UART1_RTS,
+
+	GPIO109_UART2_RTS,
+	GPIO110_UART2_RXD,
+	GPIO111_UART2_TXD,
+	GPIO112_UART2_CTS,
+
+	GPIO105_UART3_CTS,
+	GPIO106_UART3_RTS,
+	GPIO107_UART3_TXD,
+	GPIO108_UART3_RXD,
+
+	GPIO78_GPIO,
+	GPIO79_GPIO,
+	GPIO80_GPIO,
+	GPIO81_GPIO,
+
+	/* I2C */
+	GPIO32_I2C_SCL,
+	GPIO33_I2C_SDA,
+
+	/* MMC */
+	GPIO18_MMC1_DAT0,
+	GPIO19_MMC1_DAT1,
+	GPIO20_MMC1_DAT2,
+	GPIO21_MMC1_DAT3,
+	GPIO22_MMC1_CLK,
+	GPIO23_MMC1_CMD,
+	GPIO72_GPIO | MFP_PULL_HIGH, /* Card Detect */
+	GPIO84_GPIO | MFP_PULL_LOW, /* Write Protect */
+
+	/* IRQ */
+	GPIO74_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ1 */
+	GPIO75_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ2 */
+	GPIO76_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ3 */
+	GPIO77_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ4 */
+	GPIO78_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ5 */
+	GPIO79_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ6 */
+	GPIO80_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ7 */
+	GPIO81_GPIO | MFP_LPM_EDGE_RISE  /* EXT_IRQ8 */
+};
+
+/* MMC/MCI Support */
+#if defined(CONFIG_MMC)
+static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+	.detect_delay = 1,
+	.gpio_card_detect = MXM_8X10_SD_nCD,
+	.gpio_card_ro = MXM_8X10_SD_WP,
+	.gpio_power = -1
+};
+
+void __init mxm_8x10_mmc_init(void)
+{
+	pxa_set_mci_info(&mxm_8x10_mci_platform_data);
+}
+#endif
+
+/* USB Open Host Controler Interface */
+static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
+	.port_mode = PMM_NPS_MODE,
+	.flags = ENABLE_PORT_ALL
+};
+
+void __init mxm_8x10_usb_host_init(void)
+{
+	pxa_set_ohci_info(&mxm_8x10_ohci_platform_data);
+}
+
+/* AC97 Sound Support */
+static struct platform_device mxm_8x10_ac97_device = {
+	.name = "pxa2xx-ac97"
+};
+
+void __init mxm_8x10_ac97_init(void)
+{
+	platform_device_register(&mxm_8x10_ac97_device);
+}
+
+/* NAND flash Support */
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#define NAND_BLOCK_SIZE SZ_128K
+#define NB(x)           (NAND_BLOCK_SIZE * (x))
+static struct mtd_partition mxm_8x10_nand_partitions[] = {
+	[0] = {
+	       .name = "boot",
+	       .size = NB(0x002),
+	       .offset = NB(0x000),
+	       .mask_flags = MTD_WRITEABLE
+	},
+	[1] = {
+	       .name = "kernel",
+	       .size = NB(0x010),
+	       .offset = NB(0x002),
+	       .mask_flags = MTD_WRITEABLE
+	},
+	[2] = {
+	       .name = "root",
+	       .size = NB(0x36c),
+	       .offset = NB(0x012)
+	},
+	[3] = {
+	       .name = "bbt",
+	       .size = NB(0x082),
+	       .offset = NB(0x37e),
+	       .mask_flags = MTD_WRITEABLE
+	}
+};
+
+static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
+	.enable_arbiter = 1,
+	.keep_config = 1,
+	.parts = mxm_8x10_nand_partitions,
+	.nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions)
+};
+
+static void __init mxm_8x10_nand_init(void)
+{
+	pxa3xx_set_nand_info(&mxm_8x10_nand_info);
+}
+#else
+static inline void mxm_8x10_nand_init(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
+/* Ethernet support: Davicom DM9000 */
+static struct resource dm9k_resources[] = {
+	[0] = {
+	       .start = MXM_8X10_ETH_PHYS + 0x300,
+	       .end = MXM_8X10_ETH_PHYS + 0x300,
+	       .flags = IORESOURCE_MEM
+	},
+	[1] = {
+	       .start = MXM_8X10_ETH_PHYS + 0x308,
+	       .end = MXM_8X10_ETH_PHYS + 0x308,
+	       .flags = IORESOURCE_MEM
+	},
+	[2] = {
+	       .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+	       .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+	       .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
+	}
+};
+
+static struct dm9000_plat_data dm9k_plat_data = {
+	.flags = DM9000_PLATF_16BITONLY
+};
+
+static struct platform_device dm9k_device = {
+	.name = "dm9000",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(dm9k_resources),
+	.resource = dm9k_resources,
+	.dev = {
+		.platform_data = &dm9k_plat_data
+	}
+};
+
+static void __init mxm_8x10_ethernet_init(void)
+{
+	platform_device_register(&dm9k_device);
+}
+
+/* PXA UARTs */
+static void __init mxm_8x10_uarts_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+}
+
+/* I2C and Real Time Clock */
+static struct i2c_board_info __initdata mxm_8x10_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68)
+	}
+};
+
+static void __init mxm_8x10_i2c_init(void)
+{
+	i2c_register_board_info(0, mxm_8x10_i2c_devices,
+				ARRAY_SIZE(mxm_8x10_i2c_devices));
+	pxa_set_i2c_info(NULL);
+}
+
+void __init mxm_8x10_barebones_init(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
+
+	mxm_8x10_uarts_init();
+	mxm_8x10_nand_init();
+	mxm_8x10_i2c_init();
+	mxm_8x10_ethernet_init();
+}
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index e100af7..f70c75b 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -83,26 +83,7 @@
 	GPIO105_KP_MKOUT_2,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* PWM */
 	GPIO16_PWM0_OUT,
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 8fe3ec2..d902a81 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -87,26 +87,7 @@
 	GPIO105_KP_MKOUT_2,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* PWM */
 	GPIO16_PWM0_OUT,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index b992f07..717d7a6 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -84,26 +84,7 @@
 	GPIO36_GPIO,	/* pullup */
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* MATRIX KEYPAD */
 	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index dc728d6..3d284ff 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -73,26 +73,7 @@
 	GPIO47_FICP_TXD,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* GPIO KEYS */
 	GPIO5_GPIO,	/* notes */
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index b433bb4..d8b4469 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -99,25 +99,7 @@
 	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,	/* Hotsync button */
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* Quick Capture Interface */
 	GPIO84_CIF_FV,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index b37a025..007b58c 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -110,26 +110,7 @@
 	GPIO105_KP_MKOUT_2,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* FFUART */
 	GPIO34_FFUART_RXD,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 1c5d68a..3a7925ca 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -95,26 +95,8 @@
 	GPIO105_KP_MKOUT_2,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
+
 	GPIO20_GPIO,	/* bl power */
 	GPIO21_GPIO,	/* LCD border switch */
 	GPIO22_GPIO,	/* LCD border color */
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index d5255ae..9d0ecea1 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -58,6 +58,12 @@
 	/* I2C */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
 };
 
 /*
@@ -259,8 +265,7 @@
 	unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
 
 	do {
-		GEDR(PCM990_CTRL_INT_IRQ_GPIO) =
-					GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
+		desc->chip->ack(irq);	/* clear our parent IRQ */
 		if (likely(pending)) {
 			irq = PCM027_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index c2b938a..d58a524 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -91,26 +91,7 @@
 	GPIO35_FFUART_CTS,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* PC Card */
 	GPIO48_nPOE,
@@ -193,11 +174,18 @@
 	},
 };
 
+static struct locomo_platform_data locomo_info = {
+	.irq_base	= IRQ_BOARD_START,
+};
+
 struct platform_device poodle_locomo_device = {
 	.name		= "locomo",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(locomo_resources),
 	.resource	= locomo_resources,
+	.dev		= {
+		.platform_data	= &locomo_info,
+	},
 };
 
 EXPORT_SYMBOL(poodle_locomo_device);
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d783123..0af3617 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -40,6 +40,25 @@
 }
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
+static unsigned long ac97_reset_config[] = {
+	GPIO95_AC97_nRESET,
+	GPIO95_GPIO,
+	GPIO113_AC97_nRESET,
+	GPIO113_GPIO,
+};
+
+void pxa27x_assert_ac97reset(int reset_gpio, int on)
+{
+	if (reset_gpio == 113)
+		pxa2xx_mfp_config(on ? &ac97_reset_config[0] :
+				       &ac97_reset_config[1], 1);
+
+	if (reset_gpio == 95)
+		pxa2xx_mfp_config(on ? &ac97_reset_config[2] :
+				       &ac97_reset_config[3], 1);
+}
+EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset);
+
 /* Crystal clock: 13MHz */
 #define BASE_CLK	13000000
 
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
new file mode 100644
index 0000000..3184bdc
--- /dev/null
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -0,0 +1,1108 @@
+/*
+ * arch/arm/mach-pxa/raumfeld.c
+ *
+ * Support for the following Raumfeld devices:
+ *
+ * 	* Controller
+ *  	* Connector
+ *  	* Speaker S/M
+ *
+ * See http://www.raumfeld.com for details.
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/input.h>
+#include <linux/rotary_encoder.h>
+#include <linux/gpio_keys.h>
+#include <linux/input/eeti_ts.h>
+#include <linux/leds.h>
+#include <linux/w1-gpio.h>
+#include <linux/sched.h>
+#include <linux/pwm_backlight.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/lis3lv02d.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/regulator/max8660.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa3xx.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/ohci.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
+/* common GPIO	definitions */
+
+/* inputs */
+#define GPIO_ON_OFF		(14)
+#define GPIO_VOLENC_A		(19)
+#define GPIO_VOLENC_B		(20)
+#define GPIO_CHARGE_DONE	(23)
+#define GPIO_CHARGE_IND		(27)
+#define GPIO_TOUCH_IRQ		(32)
+#define GPIO_ETH_IRQ		(40)
+#define GPIO_SPI_MISO		(98)
+#define GPIO_ACCEL_IRQ		(104)
+#define GPIO_RESCUE_BOOT	(115)
+#define GPIO_DOCK_DETECT	(116)
+#define GPIO_KEY1		(117)
+#define GPIO_KEY2		(118)
+#define GPIO_KEY3		(119)
+#define GPIO_CHARGE_USB_OK	(112)
+#define GPIO_CHARGE_DC_OK	(101)
+#define GPIO_CHARGE_USB_SUSP	(102)
+
+/* outputs */
+#define GPIO_SHUTDOWN_SUPPLY	(16)
+#define GPIO_SHUTDOWN_BATT	(18)
+#define GPIO_CHRG_PEN2		(31)
+#define GPIO_TFT_VA_EN		(33)
+#define GPIO_SPDIF_CS		(34)
+#define GPIO_LED2		(35)
+#define GPIO_LED1		(36)
+#define GPIO_SPDIF_RESET	(38)
+#define GPIO_SPI_CLK		(95)
+#define GPIO_MCLK_DAC_CS	(96)
+#define GPIO_SPI_MOSI		(97)
+#define GPIO_W1_PULLUP_ENABLE	(105)
+#define GPIO_DISPLAY_ENABLE	(106)
+#define GPIO_MCLK_RESET		(111)
+#define GPIO_W2W_RESET		(113)
+#define GPIO_W2W_PDN		(114)
+#define GPIO_CODEC_RESET	(120)
+#define GPIO_AUDIO_VA_ENABLE	(124)
+#define GPIO_ACCEL_CS		(125)
+#define GPIO_ONE_WIRE		(126)
+
+/*
+ * GPIO configurations
+ */
+static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO77_UART1_RXD,
+	GPIO78_UART1_TXD,
+	GPIO79_UART1_CTS,
+	GPIO81_UART1_DSR,
+	GPIO83_UART1_DTR,
+	GPIO84_UART1_RTS,
+
+	/* UART3 */
+	GPIO110_UART3_RXD,
+
+	/* USB Host */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+
+	/* I2C */
+	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+	/* SPI */
+	GPIO34_GPIO,	/* SPDIF_CS */
+	GPIO96_GPIO,	/* MCLK_CS */
+	GPIO125_GPIO,	/* ACCEL_CS */
+
+	/* MMC */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+
+	/* One-wire */
+	GPIO126_GPIO | MFP_LPM_FLOAT,
+	GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW,
+
+	/* CHRG_USB_OK */
+	GPIO101_GPIO | MFP_PULL_HIGH,
+	/* CHRG_USB_OK */
+	GPIO112_GPIO | MFP_PULL_HIGH,
+	/* CHRG_USB_SUSP */
+	GPIO102_GPIO,
+	/* DISPLAY_ENABLE */
+	GPIO106_GPIO,
+	/* DOCK_DETECT */
+	GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+	/* LCD */
+	GPIO54_LCD_LDD_0,
+	GPIO55_LCD_LDD_1,
+	GPIO56_LCD_LDD_2,
+	GPIO57_LCD_LDD_3,
+	GPIO58_LCD_LDD_4,
+	GPIO59_LCD_LDD_5,
+	GPIO60_LCD_LDD_6,
+	GPIO61_LCD_LDD_7,
+	GPIO62_LCD_LDD_8,
+	GPIO63_LCD_LDD_9,
+	GPIO64_LCD_LDD_10,
+	GPIO65_LCD_LDD_11,
+	GPIO66_LCD_LDD_12,
+	GPIO67_LCD_LDD_13,
+	GPIO68_LCD_LDD_14,
+	GPIO69_LCD_LDD_15,
+	GPIO70_LCD_LDD_16,
+	GPIO71_LCD_LDD_17,
+	GPIO72_LCD_FCLK,
+	GPIO73_LCD_LCLK,
+	GPIO74_LCD_PCLK,
+	GPIO75_LCD_BIAS,
+};
+
+static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO77_UART1_RXD,
+	GPIO78_UART1_TXD,
+	GPIO79_UART1_CTS,
+	GPIO81_UART1_DSR,
+	GPIO83_UART1_DTR,
+	GPIO84_UART1_RTS,
+
+	/* UART3 */
+	GPIO110_UART3_RXD,
+
+	/* USB Host */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+
+	/* I2C */
+	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+	/* SPI */
+	GPIO34_GPIO,	/* SPDIF_CS */
+	GPIO96_GPIO,	/* MCLK_CS */
+	GPIO125_GPIO,	/* ACCEL_CS */
+
+	/* MMC */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+
+	/* Ethernet */
+	GPIO1_nCS2,			/* CS */
+	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
+
+	/* SSP for I2S */
+	GPIO85_SSP1_SCLK,
+	GPIO89_SSP1_EXTCLK,
+	GPIO86_SSP1_FRM,
+	GPIO87_SSP1_TXD,
+	GPIO88_SSP1_RXD,
+	GPIO90_SSP1_SYSCLK,
+
+	/* SSP2 for S/PDIF */
+	GPIO25_SSP2_SCLK,
+	GPIO26_SSP2_FRM,
+	GPIO27_SSP2_TXD,
+	GPIO29_SSP2_EXTCLK,
+
+	/* LEDs */
+	GPIO35_GPIO | MFP_LPM_PULL_LOW,
+	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
+};
+
+static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO77_UART1_RXD,
+	GPIO78_UART1_TXD,
+	GPIO79_UART1_CTS,
+	GPIO81_UART1_DSR,
+	GPIO83_UART1_DTR,
+	GPIO84_UART1_RTS,
+
+	/* UART3 */
+	GPIO110_UART3_RXD,
+
+	/* USB Host */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+
+	/* I2C */
+	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+	/* SPI */
+	GPIO34_GPIO,	/* SPDIF_CS */
+	GPIO96_GPIO,	/* MCLK_CS */
+	GPIO125_GPIO,	/* ACCEL_CS */
+
+	/* MMC */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+
+	/* Ethernet */
+	GPIO1_nCS2,			/* CS */
+	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
+
+	/* SSP for I2S */
+	GPIO85_SSP1_SCLK,
+	GPIO89_SSP1_EXTCLK,
+	GPIO86_SSP1_FRM,
+	GPIO87_SSP1_TXD,
+	GPIO88_SSP1_RXD,
+	GPIO90_SSP1_SYSCLK,
+
+	/* LEDs */
+	GPIO35_GPIO | MFP_LPM_PULL_LOW,
+	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
+};
+
+/*
+ * SMSC LAN9220 Ethernet
+ */
+
+static struct resource smc91x_resources[] = {
+	{
+		.start	= PXA3xx_CS2_PHYS,
+		.end	= PXA3xx_CS2_PHYS + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= gpio_to_irq(GPIO_ETH_IRQ),
+		.end	= gpio_to_irq(GPIO_ETH_IRQ),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+	}
+};
+
+static struct smsc911x_platform_config raumfeld_smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &raumfeld_smsc911x_config,
+	}
+};
+
+/**
+ * NAND
+ */
+
+static struct mtd_partition raumfeld_nand_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0,
+		.size		= 0xa0000,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name		= "BootloaderEnvironment",
+		.offset		= 0xa0000,
+		.size		= 0x20000,
+	},
+	{
+		.name		= "BootloaderSplashScreen",
+		.offset		= 0xc0000,
+		.size		= 0x60000,
+	},
+	{
+		.name		= "UBI",
+		.offset		= 0x120000,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
+	.enable_arbiter	= 1,
+	.keep_config	= 1,
+	.parts		= raumfeld_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(raumfeld_nand_partitions),
+};
+
+/**
+ * USB (OHCI) support
+ */
+
+static struct pxaohci_platform_data raumfeld_ohci_info = {
+	.port_mode      = PMM_GLOBAL_MODE,
+	.flags		= ENABLE_PORT1,
+};
+
+/**
+ * Rotary encoder input device
+ */
+
+static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = {
+	.steps		= 24,
+	.axis		= REL_X,
+	.relative_axis	= 1,
+	.gpio_a		= GPIO_VOLENC_A,
+	.gpio_b		= GPIO_VOLENC_B,
+	.inverted_a	= 1,
+	.inverted_b	= 0,
+};
+
+static struct platform_device rotary_encoder_device = {
+	.name		= "rotary-encoder",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &raumfeld_rotary_encoder_info,
+	}
+};
+
+/**
+ * GPIO buttons
+ */
+
+static struct gpio_keys_button gpio_keys_button[] = {
+	{
+		.code			= KEY_F1,
+		.type			= EV_KEY,
+		.gpio			= GPIO_KEY1,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "Button 1",
+	},
+	{
+		.code			= KEY_F2,
+		.type			= EV_KEY,
+		.gpio			= GPIO_KEY2,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "Button 2",
+	},
+	{
+		.code			= KEY_F3,
+		.type			= EV_KEY,
+		.gpio			= GPIO_KEY3,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "Button 3",
+	},
+	{
+		.code			= KEY_F4,
+		.type			= EV_KEY,
+		.gpio			= GPIO_RESCUE_BOOT,
+		.active_low		= 0,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "rescue boot button",
+	},
+	{
+		.code			= KEY_F5,
+		.type			= EV_KEY,
+		.gpio			= GPIO_DOCK_DETECT,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "dock detect",
+	},
+	{
+		.code			= KEY_F6,
+		.type			= EV_KEY,
+		.gpio			= GPIO_ON_OFF,
+		.active_low		= 0,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "on/off button",
+	},
+};
+
+static struct gpio_keys_platform_data gpio_keys_platform_data = {
+	.buttons	= gpio_keys_button,
+	.nbuttons	= ARRAY_SIZE(gpio_keys_button),
+	.rep		= 0,
+};
+
+static struct platform_device raumfeld_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev 	= {
+		.platform_data	= &gpio_keys_platform_data,
+	}
+};
+
+/**
+ * GPIO LEDs
+ */
+
+static struct gpio_led raumfeld_leds[] = {
+	{
+		.name		= "raumfeld:1",
+		.gpio		= GPIO_LED1,
+		.active_low	= 1,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name		= "raumfeld:2",
+		.gpio		= GPIO_LED2,
+		.active_low	= 0,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	}
+};
+
+static struct gpio_led_platform_data raumfeld_led_platform_data = {
+	.leds		= raumfeld_leds,
+	.num_leds	= ARRAY_SIZE(raumfeld_leds),
+};
+
+static struct platform_device raumfeld_led_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &raumfeld_led_platform_data,
+	},
+};
+
+/**
+ * One-wire (W1 bus) support
+ */
+
+static void w1_enable_external_pullup(int enable)
+{
+	gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable);
+	msleep(100);
+}
+
+static struct w1_gpio_platform_data w1_gpio_platform_data = {
+	.pin			= GPIO_ONE_WIRE,
+	.is_open_drain		= 0,
+	.enable_external_pullup	= w1_enable_external_pullup,
+};
+
+struct platform_device raumfeld_w1_gpio_device = {
+	.name	= "w1-gpio",
+	.dev	= {
+		.platform_data = &w1_gpio_platform_data
+	}
+};
+
+static void __init raumfeld_w1_init(void)
+{
+	int ret = gpio_request(GPIO_W1_PULLUP_ENABLE,
+				"W1 external pullup enable");
+
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n");
+	else
+		gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
+
+	platform_device_register(&raumfeld_w1_gpio_device);
+}
+
+/**
+ * Framebuffer device
+ */
+
+/* PWM controlled backlight */
+static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	/* 10000 ns = 10 ms ^= 100 kHz */
+	.pwm_period_ns	= 10000,
+};
+
+static struct platform_device raumfeld_pwm_backlight_device = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &raumfeld_pwm_backlight_data,
+	}
+};
+
+/* LT3593 controlled backlight */
+static struct gpio_led raumfeld_lt3593_led = {
+	.name		= "backlight",
+	.gpio		= mfp_to_gpio(MFP_PIN_GPIO17),
+	.default_state	= LEDS_GPIO_DEFSTATE_ON,
+};
+
+static struct gpio_led_platform_data raumfeld_lt3593_platform_data = {
+	.leds		= &raumfeld_lt3593_led,
+	.num_leds	= 1,
+};
+
+static struct platform_device raumfeld_lt3593_device = {
+	.name	= "leds-lt3593",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &raumfeld_lt3593_platform_data,
+	},
+};
+
+static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
+	.pixclock	= 111000,
+	.xres		= 480,
+	.yres		= 272,
+	.bpp		= 16,
+	.hsync_len	= 4,
+	.left_margin	= 2,
+	.right_margin	= 1,
+	.vsync_len	= 1,
+	.upper_margin	= 3,
+	.lower_margin	= 1,
+	.sync		= 0,
+};
+
+static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
+	.modes		= &sharp_lq043t3dx02_mode,
+	.num_modes	= 1,
+	.video_mem_size = 0x400000,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init raumfeld_lcd_init(void)
+{
+	int ret;
+
+	set_pxa_fb_info(&raumfeld_sharp_lcd_info);
+
+	/* Earlier devices had the backlight regulator controlled
+	 * via PWM, later versions use another controller for that */
+	if ((system_rev & 0xff) < 2) {
+		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
+		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+		platform_device_register(&raumfeld_pwm_backlight_device);
+	} else
+		platform_device_register(&raumfeld_lt3593_device);
+
+	ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_TFT_VA_EN\n");
+	else
+		gpio_direction_output(GPIO_TFT_VA_EN, 1);
+
+	ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
+	else
+		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
+}
+
+/**
+ * SPI devices
+ */
+
+struct spi_gpio_platform_data raumfeld_spi_platform_data = {
+	.sck		= GPIO_SPI_CLK,
+	.mosi		= GPIO_SPI_MOSI,
+	.miso		= GPIO_SPI_MISO,
+	.num_chipselect	= 3,
+};
+
+static struct platform_device raumfeld_spi_device = {
+	.name	= "spi_gpio",
+	.id	= 0,
+	.dev 	= {
+		.platform_data	= &raumfeld_spi_platform_data,
+	}
+};
+
+static struct lis3lv02d_platform_data lis3_pdata = {
+	.click_flags 	= LIS3_CLICK_SINGLE_X |
+			  LIS3_CLICK_SINGLE_Y |
+			  LIS3_CLICK_SINGLE_Z,
+	.irq_cfg	= LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK,
+	.wakeup_flags	= LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI |
+			  LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI |
+			  LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI,
+	.wakeup_thresh	= 10,
+	.click_thresh_x = 10,
+	.click_thresh_y = 10,
+	.click_thresh_z = 10,
+};
+
+#define SPI_AK4104	\
+{			\
+	.modalias	= "ak4104",	\
+	.max_speed_hz	= 10000,	\
+	.bus_num	= 0,		\
+	.chip_select	= 0,		\
+	.controller_data = (void *) GPIO_SPDIF_CS,	\
+}
+
+#define SPI_LIS3	\
+{			\
+	.modalias	= "lis3lv02d_spi",	\
+	.max_speed_hz	= 1000000,		\
+	.bus_num	= 0,			\
+	.chip_select	= 1,			\
+	.controller_data = (void *) GPIO_ACCEL_CS,	\
+	.platform_data	= &lis3_pdata,		\
+	.irq		= gpio_to_irq(GPIO_ACCEL_IRQ),	\
+}
+
+#define SPI_DAC7512	\
+{	\
+	.modalias	= "dac7512",		\
+	.max_speed_hz	= 1000000,		\
+	.bus_num	= 0,			\
+	.chip_select	= 2,			\
+	.controller_data = (void *) GPIO_MCLK_DAC_CS,	\
+}
+
+static struct spi_board_info connector_spi_devices[] __initdata = {
+	SPI_AK4104,
+	SPI_DAC7512,
+};
+
+static struct spi_board_info speaker_spi_devices[] __initdata = {
+	SPI_DAC7512,
+};
+
+static struct spi_board_info controller_spi_devices[] __initdata = {
+	SPI_LIS3,
+};
+
+/**
+ * MMC for Marvell Libertas 8688 via SDIO
+ */
+
+static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data)
+{
+	gpio_set_value(GPIO_W2W_RESET, 1);
+	gpio_set_value(GPIO_W2W_PDN, 1);
+
+	return 0;
+}
+
+static void raumfeld_mci_exit(struct device *dev, void *data)
+{
+	gpio_set_value(GPIO_W2W_RESET, 0);
+	gpio_set_value(GPIO_W2W_PDN, 0);
+}
+
+static struct pxamci_platform_data raumfeld_mci_platform_data = {
+	.init			= raumfeld_mci_init,
+	.exit			= raumfeld_mci_exit,
+	.detect_delay		= 20,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+};
+
+/*
+ * External power / charge logic
+ */
+
+static int power_supply_init(struct device *dev)
+{
+	return 0;
+}
+
+static void power_supply_exit(struct device *dev)
+{
+}
+
+static int raumfeld_is_ac_online(void)
+{
+	return !gpio_get_value(GPIO_CHARGE_DC_OK);
+}
+
+static int raumfeld_is_usb_online(void)
+{
+	return 0;
+}
+
+static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
+
+static struct pda_power_pdata power_supply_info = {
+	.init			= power_supply_init,
+	.is_ac_online		= raumfeld_is_ac_online,
+	.is_usb_online		= raumfeld_is_usb_online,
+	.exit			= power_supply_exit,
+	.supplied_to		= raumfeld_power_supplicants,
+	.num_supplicants	= ARRAY_SIZE(raumfeld_power_supplicants)
+};
+
+static struct resource power_supply_resources[] = {
+	{
+		.name  = "ac",
+		.flags = IORESOURCE_IRQ |
+			 IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+		.start = GPIO_CHARGE_DC_OK,
+		.end   = GPIO_CHARGE_DC_OK,
+	},
+};
+
+static irqreturn_t charge_done_irq(int irq, void *dev_id)
+{
+	struct power_supply *psy;
+
+	psy = power_supply_get_by_name("ds2760-battery.0");
+
+	if (psy)
+		power_supply_set_battery_charged(psy);
+
+	return IRQ_HANDLED;
+}
+
+static struct platform_device raumfeld_power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+	.resource      = power_supply_resources,
+	.num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+static void __init raumfeld_power_init(void)
+{
+	int ret;
+
+	/* Set PEN2 high to enable maximum charge current */
+	ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_CHRG_PEN2\n");
+	else
+		gpio_direction_output(GPIO_CHRG_PEN2, 1);
+
+	ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_CHARGE_DC_OK\n");
+
+	ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n");
+	else
+		gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
+
+	power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
+	power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
+
+	ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
+			&charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
+			"charge_done", NULL);
+
+	if (ret < 0)
+		printk(KERN_ERR "%s: unable to register irq %d\n", __func__,
+			GPIO_CHARGE_DONE);
+	else
+		platform_device_register(&raumfeld_power_supply);
+}
+
+/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */
+
+static struct regulator_consumer_supply audio_va_consumer_supply =
+	REGULATOR_SUPPLY("va", "0-0048");
+
+struct regulator_init_data audio_va_initdata = {
+	.consumer_supplies = &audio_va_consumer_supply,
+	.num_consumer_supplies = 1,
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct fixed_voltage_config audio_va_config = {
+	.supply_name		= "audio_va",
+	.microvolts		= 5000000,
+	.gpio			= GPIO_AUDIO_VA_ENABLE,
+	.enable_high		= 1,
+	.enabled_at_boot	= 0,
+	.init_data		= &audio_va_initdata,
+};
+
+static struct platform_device audio_va_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &audio_va_config,
+	},
+};
+
+/* Dummy supplies for Codec's VD/VLC */
+
+static struct regulator_consumer_supply audio_dummy_supplies[] = {
+	REGULATOR_SUPPLY("vd", "0-0048"),
+	REGULATOR_SUPPLY("vlc", "0-0048"),
+};
+
+struct regulator_init_data audio_dummy_initdata = {
+	.consumer_supplies = audio_dummy_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct fixed_voltage_config audio_dummy_config = {
+	.supply_name		= "audio_vd",
+	.microvolts		= 3300000,
+	.gpio			= -1,
+	.init_data		= &audio_dummy_initdata,
+};
+
+static struct platform_device audio_supply_dummy_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &audio_dummy_config,
+	},
+};
+
+static struct platform_device *audio_regulator_devices[] = {
+	&audio_va_device,
+	&audio_supply_dummy_device,
+};
+
+/**
+ * Regulator support via MAX8660
+ */
+
+static struct regulator_consumer_supply vcc_mmc_supply =
+	REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0");
+
+static struct regulator_init_data vcc_mmc_init_data = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_MODE,
+	},
+	.consumer_supplies = &vcc_mmc_supply,
+	.num_consumer_supplies = 1,
+};
+
+struct max8660_subdev_data max8660_v6_subdev_data = {
+	.id		= MAX8660_V6,
+	.name		= "vmmc",
+	.platform_data	= &vcc_mmc_init_data,
+};
+
+static struct max8660_platform_data max8660_pdata = {
+	.subdevs = &max8660_v6_subdev_data,
+	.num_subdevs = 1,
+};
+
+/**
+ * I2C devices
+ */
+
+static struct i2c_board_info raumfeld_pwri2c_board_info = {
+	.type		= "max8660",
+	.addr		= 0x34,
+	.platform_data	= &max8660_pdata,
+};
+
+static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
+	.type	= "cs4270",
+	.addr	= 0x48,
+};
+
+static struct eeti_ts_platform_data eeti_ts_pdata = {
+	.irq_active_high = 1,
+};
+
+static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
+	.type	= "eeti_ts",
+	.addr	= 0x0a,
+	.irq	= gpio_to_irq(GPIO_TOUCH_IRQ),
+	.platform_data = &eeti_ts_pdata,
+};
+
+static struct platform_device *raumfeld_common_devices[] = {
+	&raumfeld_gpio_keys_device,
+	&raumfeld_led_device,
+	&raumfeld_spi_device,
+};
+
+static void __init raumfeld_audio_init(void)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
+	if (ret < 0)
+		pr_warning("unable to request GPIO_CODEC_RESET\n");
+	else
+		gpio_direction_output(GPIO_CODEC_RESET, 1);
+
+	ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
+	if (ret < 0)
+		pr_warning("unable to request GPIO_SPDIF_RESET\n");
+	else
+		gpio_direction_output(GPIO_SPDIF_RESET, 1);
+
+	ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
+	if (ret < 0)
+		pr_warning("unable to request GPIO_MCLK_RESET\n");
+	else
+		gpio_direction_output(GPIO_MCLK_RESET, 1);
+
+	platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
+}
+
+static void __init raumfeld_common_init(void)
+{
+	int ret;
+
+	/* The on/off button polarity has changed after revision 1 */
+	if ((system_rev & 0xff) > 1) {
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
+			if (!strcmp(gpio_keys_button[i].desc, "on/off button"))
+				gpio_keys_button[i].active_low = 1;
+	}
+
+	enable_irq_wake(IRQ_WAKEUP0);
+
+	pxa3xx_set_nand_info(&raumfeld_nand_info);
+	pxa3xx_set_i2c_power_info(NULL);
+	pxa_set_ohci_info(&raumfeld_ohci_info);
+	pxa_set_mci_info(&raumfeld_mci_platform_data);
+	pxa_set_i2c_info(NULL);
+	pxa_set_ffuart_info(NULL);
+
+	ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_W2W_RESET\n");
+	else
+		gpio_direction_output(GPIO_W2W_RESET, 0);
+
+	ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_W2W_PDN\n");
+	else
+		gpio_direction_output(GPIO_W2W_PDN, 0);
+
+	/* this can be used to switch off the device */
+	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY,
+				"supply shutdown");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
+	else
+		gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
+
+	platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices));
+	i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
+}
+
+static void __init raumfeld_controller_init(void)
+{
+	int ret;
+
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
+	platform_device_register(&rotary_encoder_device);
+	spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
+	i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
+
+	ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n");
+	else
+		gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
+
+	raumfeld_common_init();
+	raumfeld_power_init();
+	raumfeld_lcd_init();
+	raumfeld_w1_init();
+}
+
+static void __init raumfeld_connector_init(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
+	spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
+	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
+
+	platform_device_register(&smc91x_device);
+
+	raumfeld_audio_init();
+	raumfeld_common_init();
+}
+
+static void __init raumfeld_speaker_init(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
+	spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
+	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
+
+	platform_device_register(&smc91x_device);
+	platform_device_register(&rotary_encoder_device);
+
+	raumfeld_audio_init();
+	raumfeld_common_init();
+}
+
+/* physical memory regions */
+#define	RAUMFELD_SDRAM_BASE	0xa0000000	/* SDRAM region */
+
+#ifdef CONFIG_MACH_RAUMFELD_RC
+MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.init_machine	= raumfeld_controller_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
+MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.init_machine	= raumfeld_connector_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
+MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.init_machine	= raumfeld_speaker_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 67229a1..463d874 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -900,7 +900,7 @@
 };
 #endif
 
-static int __init sharpsl_pm_probe(struct platform_device *pdev)
+static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
 {
 	int ret;
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 28352c0b..19b5109 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -56,25 +56,7 @@
 	GPIO80_nCS_4,	/* SCOOP #1 */
 
 	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* PC Card */
 	GPIO48_nPOE,
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 9ebe658..a81d6db 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -35,6 +35,8 @@
 #include <mach/ssp.h>
 #include <mach/regs-ssp.h>
 
+#ifdef CONFIG_PXA_SSP_LEGACY
+
 #define TIMEOUT 100000
 
 static irqreturn_t ssp_interrupt(int irq, void *dev_id)
@@ -303,6 +305,7 @@
 	clk_disable(ssp->clk);
 	ssp_free(ssp);
 }
+#endif /* CONFIG_PXA_SSP_LEGACY */
 
 static DEFINE_MUTEX(ssp_lock);
 static LIST_HEAD(ssp_list);
@@ -488,6 +491,7 @@
 arch_initcall(pxa_ssp_init);
 module_exit(pxa_ssp_exit);
 
+#ifdef CONFIG_PXA_SSP_LEGACY
 EXPORT_SYMBOL(ssp_write_word);
 EXPORT_SYMBOL(ssp_read_word);
 EXPORT_SYMBOL(ssp_flush);
@@ -498,6 +502,7 @@
 EXPORT_SYMBOL(ssp_init);
 EXPORT_SYMBOL(ssp_exit);
 EXPORT_SYMBOL(ssp_config);
+#endif
 
 MODULE_DESCRIPTION("PXA SSP driver");
 MODULE_AUTHOR("Liam Girdwood");
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 750c448..293e40a 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -76,14 +76,12 @@
 static int
 pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
 {
-	unsigned long flags, next, oscr;
+	unsigned long next, oscr;
 
-	raw_local_irq_save(flags);
 	OIER |= OIER_E0;
 	next = OSCR + delta;
 	OSMR0 = next;
 	oscr = OSCR;
-	raw_local_irq_restore(flags);
 
 	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
 }
@@ -91,23 +89,17 @@
 static void
 pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 {
-	unsigned long irqflags;
-
 	switch (mode) {
 	case CLOCK_EVT_MODE_ONESHOT:
-		raw_local_irq_save(irqflags);
 		OIER &= ~OIER_E0;
 		OSSR = OSSR_M0;
-		raw_local_irq_restore(irqflags);
 		break;
 
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		/* initializing, released, or preparing for suspend */
-		raw_local_irq_save(irqflags);
 		OIER &= ~OIER_E0;
 		OSSR = OSSR_M0;
-		raw_local_irq_restore(irqflags);
 		break;
 
 	case CLOCK_EVT_MODE_RESUME:
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c854c16..ad552791 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -32,6 +32,7 @@
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
 #include <linux/spi/spi.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -131,24 +132,24 @@
 	GPIO45_BTUART_RTS,
 
 	/* Keybd */
-	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 0 */
+	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 1 */
+	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 2 */
+	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 3 */
+	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 4 */
+	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 5 */
+	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 6 */
+	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 7 */
+	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 8 */
+	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 9 */
+	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 10 */
+	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 0 */
+	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 1 */
+	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 2 */
+	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 3 */
+	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 4 */
+	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 5 */
+	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 6 */
 
 	/* SPI */
 	GPIO81_SSP2_CLK_OUT,
@@ -411,9 +412,87 @@
 /*
  * Tosa Keyboard
  */
+static const uint32_t tosakbd_keymap[] = {
+	KEY(0, 2, KEY_W),
+	KEY(0, 6, KEY_K),
+	KEY(0, 7, KEY_BACKSPACE),
+	KEY(0, 8, KEY_P),
+	KEY(1, 1, KEY_Q),
+	KEY(1, 2, KEY_E),
+	KEY(1, 3, KEY_T),
+	KEY(1, 4, KEY_Y),
+	KEY(1, 6, KEY_O),
+	KEY(1, 7, KEY_I),
+	KEY(1, 8, KEY_COMMA),
+	KEY(2, 1, KEY_A),
+	KEY(2, 2, KEY_D),
+	KEY(2, 3, KEY_G),
+	KEY(2, 4, KEY_U),
+	KEY(2, 6, KEY_L),
+	KEY(2, 7, KEY_ENTER),
+	KEY(2, 8, KEY_DOT),
+	KEY(3, 1, KEY_Z),
+	KEY(3, 2, KEY_C),
+	KEY(3, 3, KEY_V),
+	KEY(3, 4, KEY_J),
+	KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
+	KEY(3, 6, TOSA_KEY_CANCEL),
+	KEY(3, 7, TOSA_KEY_CENTER),
+	KEY(3, 8, TOSA_KEY_OK),
+	KEY(3, 9, KEY_LEFTSHIFT),
+	KEY(4, 1, KEY_S),
+	KEY(4, 2, KEY_R),
+	KEY(4, 3, KEY_B),
+	KEY(4, 4, KEY_N),
+	KEY(4, 5, TOSA_KEY_CALENDAR),
+	KEY(4, 6, TOSA_KEY_HOMEPAGE),
+	KEY(4, 7, KEY_LEFTCTRL),
+	KEY(4, 8, TOSA_KEY_LIGHT),
+	KEY(4, 10, KEY_RIGHTSHIFT),
+	KEY(5, 1, KEY_TAB),
+	KEY(5, 2, KEY_SLASH),
+	KEY(5, 3, KEY_H),
+	KEY(5, 4, KEY_M),
+	KEY(5, 5, TOSA_KEY_MENU),
+	KEY(5, 7, KEY_UP),
+	KEY(5, 11, TOSA_KEY_FN),
+	KEY(6, 1, KEY_X),
+	KEY(6, 2, KEY_F),
+	KEY(6, 3, KEY_SPACE),
+	KEY(6, 4, KEY_APOSTROPHE),
+	KEY(6, 5, TOSA_KEY_MAIL),
+	KEY(6, 6, KEY_LEFT),
+	KEY(6, 7, KEY_DOWN),
+	KEY(6, 8, KEY_RIGHT),
+};
+
+static struct matrix_keymap_data tosakbd_keymap_data = {
+	.keymap		= tosakbd_keymap,
+	.keymap_size	= ARRAY_SIZE(tosakbd_keymap),
+};
+
+static const int tosakbd_col_gpios[] =
+			{ 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 };
+static const int tosakbd_row_gpios[] =
+			{ 69, 70, 71, 72, 73, 74, 75 };
+
+static struct matrix_keypad_platform_data tosakbd_pdata = {
+	.keymap_data		= &tosakbd_keymap_data,
+	.row_gpios		= tosakbd_row_gpios,
+	.col_gpios		= tosakbd_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(tosakbd_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(tosakbd_col_gpios),
+	.col_scan_delay_us	= 10,
+	.debounce_ms		= 10,
+	.wakeup			= 1,
+};
+
 static struct platform_device tosakbd_device = {
-	.name		= "tosa-keyboard",
+	.name		= "matrix-keypad",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &tosakbd_pdata,
+	},
 };
 
 static struct gpio_keys_button tosa_gpio_keys[] = {
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 0aa858e..797f254 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -72,27 +72,14 @@
 	GPIO79_nCS_3,		/* Logic CS */
 	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* Logic irq */
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* UART */
 	GPIO9_FFUART_CTS,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 89f258c..1dd1334 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -281,7 +281,7 @@
 	do {
 		/* we're in a chained irq handler,
 		 * so ack the interrupt by hand */
-		GEDR(VIPER_CPLD_GPIO) = GPIO_bit(VIPER_CPLD_GPIO);
+		desc->chip->ack(irq);
 
 		if (likely(pending)) {
 			irq = viper_bit_to_irq(__ffs(pending));
@@ -711,6 +711,12 @@
 	GPIO80_nCS_4,
 	GPIO33_nCS_5,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* FP Backlight */
 	GPIO9_GPIO, 				/* VIPER_BCKLIGHT_EN_GPIO */
 	GPIO10_GPIO,				/* VIPER_LCD_EN_GPIO */
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 75f2a37..39896d8 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/apm-emulation.h>
+#include <linux/can/platform/mcp251x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -387,11 +388,47 @@
 	.enable_dma     = 1,
 };
 
-static struct platform_device pxa2xx_spi_ssp3_device = {
-	.name = "pxa2xx-spi",
-	.id = 3,
-	.dev = {
-		.platform_data = &pxa2xx_spi_ssp3_master_info,
+/* CAN bus on SPI */
+static int zeus_mcp2515_setup(struct spi_device *sdev)
+{
+	int err;
+
+	err = gpio_request(ZEUS_CAN_SHDN_GPIO, "CAN shutdown");
+	if (err)
+		return err;
+
+	err = gpio_direction_output(ZEUS_CAN_SHDN_GPIO, 1);
+	if (err) {
+		gpio_free(ZEUS_CAN_SHDN_GPIO);
+		return err;
+	}
+
+	return 0;
+}
+
+static int zeus_mcp2515_transceiver_enable(int enable)
+{
+	gpio_set_value(ZEUS_CAN_SHDN_GPIO, !enable);
+	return 0;
+}
+
+static struct mcp251x_platform_data zeus_mcp2515_pdata = {
+	.oscillator_frequency	= 16*1000*1000,
+	.model			= CAN_MCP251X_MCP2515,
+	.board_specific_setup	= zeus_mcp2515_setup,
+	.transceiver_enable	= zeus_mcp2515_transceiver_enable,
+	.power_enable		= zeus_mcp2515_transceiver_enable,
+};
+
+static struct spi_board_info zeus_spi_board_info[] = {
+	[0] = {
+		.modalias	= "mcp251x",
+		.platform_data	= &zeus_mcp2515_pdata,
+		.irq		= gpio_to_irq(ZEUS_CAN_GPIO),
+		.max_speed_hz	= 1*1000*1000,
+		.bus_num	= 3,
+		.mode		= SPI_MODE_0,
+		.chip_select	= 0,
 	},
 };
 
@@ -457,15 +494,28 @@
 	},
 };
 
+static struct resource zeus_max6369_resource = {
+	.start		= ZEUS_CPLD_EXTWDOG_PHYS,
+	.end		= ZEUS_CPLD_EXTWDOG_PHYS,
+	.flags		= IORESOURCE_MEM,
+};
+
+struct platform_device zeus_max6369_device = {
+	.name		= "max6369_wdt",
+	.id		= -1,
+	.resource	= &zeus_max6369_resource,
+	.num_resources	= 1,
+};
+
 static struct platform_device *zeus_devices[] __initdata = {
 	&zeus_serial_device,
 	&zeus_mtd_devices[0],
 	&zeus_dm9k0_device,
 	&zeus_dm9k1_device,
 	&zeus_sram_device,
-	&pxa2xx_spi_ssp3_device,
 	&zeus_leds_device,
 	&zeus_pcmcia_device,
+	&zeus_max6369_device,
 };
 
 /* AC'97 */
@@ -509,7 +559,9 @@
 
 static struct pxaohci_platform_data zeus_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	/* Clear Power Control Polarity Low and set Power Sense
+	 * Polarity Low. Supply power to USB ports. */
+	.flags		= ENABLE_PORT_ALL | POWER_SENSE_LOW,
 	.init		= zeus_ohci_init,
 	.exit		= zeus_ohci_exit,
 };
@@ -621,11 +673,15 @@
 	.udc_command = zeus_udc_command,
 };
 
+#ifdef CONFIG_PM
 static void zeus_power_off(void)
 {
 	local_irq_disable();
 	pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
 }
+#else
+#define zeus_power_off   NULL
+#endif
 
 #ifdef CONFIG_APM_EMULATION
 static void zeus_get_power_status(struct apm_power_info *info)
@@ -706,6 +762,12 @@
 };
 
 static mfp_cfg_t zeus_pin_config[] __initdata = {
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	GPIO15_nCS_1,
 	GPIO78_nCS_2,
 	GPIO80_nCS_4,
@@ -731,6 +793,11 @@
 	GPIO104_CIF_DD_2,
 	GPIO105_CIF_DD_1,
 
+	GPIO81_SSP3_TXD,
+	GPIO82_SSP3_RXD,
+	GPIO83_SSP3_SFRM,
+	GPIO84_SSP3_SCLK,
+
 	GPIO48_nPOE,
 	GPIO49_nPWE,
 	GPIO50_nPIOR,
@@ -785,6 +852,8 @@
 	pxa_set_ac97_info(&zeus_ac97_info);
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
+	pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
+	spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
 }
 
 static struct map_desc zeus_io_desc[] __initdata = {
@@ -807,12 +876,6 @@
 		.type    = MT_DEVICE,
 	},
 	{
-		.virtual = ZEUS_CPLD_EXTWDOG,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_EXTWDOG_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
 		.virtual = ZEUS_PC104IO,
 		.pfn     = __phys_to_pfn(ZEUS_PC104IO_PHYS),
 		.length  = 0x00800000,
@@ -837,7 +900,7 @@
 	PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
 }
 
-MACHINE_START(ARCOM_ZEUS, "Arcom ZEUS")
+MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
 	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= ((io_p2v(0x40000000) >> 18) & 0xfffc),
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 63b753f..0d8e043 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -21,7 +21,7 @@
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index b7d1f8d..a3f3c7b 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -56,7 +56,7 @@
 	.set_block = h1940bt_set_block,
 };
 
-static int __init h1940bt_probe(struct platform_device *pdev)
+static int __devinit h1940bt_probe(struct platform_device *pdev)
 {
 	struct rfkill *rfk;
 	int ret = 0;
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
similarity index 96%
rename from arch/arm/mach-s3c2410/include/mach/gpio-core.h
rename to arch/arm/mach-s3c2410/include/mach/gpio-track.h
index f8b879a..acb2591 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
@@ -15,7 +15,6 @@
 #ifndef __ASM_ARCH_GPIO_CORE_H
 #define __ASM_ARCH_GPIO_CORE_H __FILE__
 
-#include <plat/gpio-core.h>
 #include <mach/regs-gpio.h>
 
 extern struct s3c_gpio_chip s3c24xx_gpios[];
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h
similarity index 96%
rename from arch/arm/plat-s3c24xx/include/plat/pm-core.h
rename to arch/arm/mach-s3c2410/include/mach/pm-core.h
index fb45dd9..70a83b2 100644
--- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
+/* linux/arch/arm/mach-s3c2410/include/pm-core.h
  *
  * Copyright 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index ebc85c6..fd672f3 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -406,31 +406,31 @@
 #define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
+#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
 
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
 #define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
-#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
+#define S3C2443_GPE6_AC_SDI    (0x03 << 12)
 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
 #define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
-#define S3C2443_GPE7_AC_SDI    (0x03 << 14)
+#define S3C2443_GPE7_AC_SDO    (0x03 << 14)
 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 #define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
-#define S3C2443_GPE8_AC_SDO    (0x03 << 16)
+#define S3C2443_GPE8_AC_SYNC   (0x03 << 16)
 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 #define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
-#define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
+#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
 #define S3C2400_GPE9_nXDACK1   (0x02 << 18)
 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index 6026d09..d87ebe0 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -42,23 +42,14 @@
 
 #define S3C2443_PLLCON_OFF		(1<<24)
 
-#define S3C2443_CLKSRC_I2S_EXT		(1<<14)
-#define S3C2443_CLKSRC_I2S_EPLLDIV	(0<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF	(2<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF3	(3<<14)
-#define S3C2443_CLKSRC_I2S_MASK		(3<<14)
-
 #define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)
 #define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<7)
 #define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<7)
 #define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<7)
 #define S3C2443_CLKSRC_EPLLREF_MASK	(3<<7)
 
-#define S3C2443_CLKSRC_ESYSCLK_EPLL	(1<<6)
-#define S3C2443_CLKSRC_MSYSCLK_MPLL	(1<<4)
 #define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
 
-#define S3C2443_CLKDIV0_DVS		(1<<13)
 #define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
 #define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
 
@@ -81,28 +72,7 @@
 #define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
 #define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
 
-/* S3C2443_CLKDIV1 */
-
-#define S3C2443_CLKDIV1_CAMDIV_MASK	(15<<26)
-#define S3C2443_CLKDIV1_CAMDIV_SHIFT	(26)
-
-#define S3C2443_CLKDIV1_HSSPIDIV_MASK	(3<<24)
-#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT	(24)
-
-#define S3C2443_CLKDIV1_DISPDIV_MASK	(0xff<<16)
-#define S3C2443_CLKDIV1_DISPDIV_SHIFT	(16)
-
-#define S3C2443_CLKDIV1_I2SDIV_MASK	(15<<12)
-#define S3C2443_CLKDIV1_I2SDIV_SHIFT	(12)
-
-#define S3C2443_CLKDIV1_UARTDIV_MASK	(15<<8)
-#define S3C2443_CLKDIV1_UARTDIV_SHIFT	(8)
-
-#define S3C2443_CLKDIV1_HSMMCDIV_MASK	(3<<6)
-#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT	(6)
-
-#define S3C2443_CLKDIV1_USBHOSTDIV_MASK	(3<<4)
-#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
+/* S3C2443_CLKDIV1 removed, only used in clock.c code */
 
 #define S3C2443_CLKCON_NAND
 
diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
index 980a099..dcef228 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -3,7 +3,7 @@
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - SPI Controller platfrom_device info
+ * S3C2410 - SPI Controller platform_device info
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h
similarity index 99%
rename from arch/arm/plat-s3c/include/mach/timex.h
rename to arch/arm/mach-s3c2410/include/mach/timex.h
index 2a425ed..fe9ca1f 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s3c2410/include/mach/timex.h
@@ -19,8 +19,6 @@
  * for the time conversion functions to/from jiffies is acceptable.
 */
 
-
 #define CLOCK_TICK_RATE 12000000
 
-
 #endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/plat-s3c/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
similarity index 85%
rename from arch/arm/plat-s3c/include/mach/vmalloc.h
rename to arch/arm/mach-s3c2410/include/mach/vmalloc.h
index 299d95f..315b007 100644
--- a/arch/arm/plat-s3c/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/mach/vmalloc.h
+/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
  *
  * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
  *
@@ -15,6 +15,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xe0000000UL)
+#define VMALLOC_END	  (0xE0000000)
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 06a84ad..7047317 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -153,7 +153,7 @@
 	&s3c_device_adc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
-	&s3c_device_usb,
+	&s3c_device_ohci,
  	&s3c_device_rtc,
 	&s3c_device_usbgadget,
         &s3c_device_sdi,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 97162fd..02b1b622 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -584,7 +584,7 @@
 // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 1e34abe..fbedd07 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -196,7 +196,7 @@
 	.id               = -1,
 };
 
-static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
 	.gpio_detect   = S3C2410_GPF(5),
 	.gpio_wprotect = S3C2410_GPH(8),
 	.set_power     = NULL,
@@ -272,7 +272,7 @@
 
 static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_ts,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -311,12 +311,11 @@
 	u32 tmp;
 
 	s3c24xx_fb_set_platdata(&h1940_fb_info);
+	s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
 	s3c24xx_ts_set_platdata(&h1940_ts_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
-	s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
-
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0405712..684710f 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -322,7 +322,7 @@
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_usbgadget,
 	&n30_button_device,
 	&n30_blue_led,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index f6c7261..d8c7f2e 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -92,7 +92,7 @@
 /* Standard OTOM devices */
 
 static struct platform_device *otom11_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index ab092bc..92a4ec3 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -246,7 +246,7 @@
 /* Board devices */
 
 static struct platform_device *qt2410_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index c49126c..4522230 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -87,7 +87,7 @@
 };
 
 static struct platform_device *smdk2410_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 8fdb043..929164a 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -129,7 +129,7 @@
 	&s3c_device_adc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
 	&s3c_device_sdi,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 0d61fb5..9051f0d 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -334,7 +334,7 @@
 /* devices for this board */
 
 static struct platform_device *vr1000_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6b9d0d83..29bd3d9 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -91,7 +91,7 @@
 	}
 }
 
-static struct s3c2410_hcd_info usb_simtec_info = {
+static struct s3c2410_hcd_info usb_simtec_info __initdata = {
 	.port[0]	= {
 		.flags	= S3C_HCDFLG_USED
 	},
@@ -127,6 +127,6 @@
 	gpio_direction_output(S3C2410_GPB(4), 1);
 	gpio_direction_input(S3C2410_GPG(10));
 
-	s3c_device_usb.dev.platform_data = &usb_simtec_info;
+	s3c_ohci_set_platdata(&usb_simtec_info);
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index a037df5..0c0505b 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -124,7 +124,9 @@
 	.name		= "usysclk",
 	.id		= -1,
 	.parent		= &clk_xtal,
-	.set_parent	= s3c2412_setparent_usysclk,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2412_setparent_usysclk,
+	},
 };
 
 static struct clk clk_mrefclk = {
@@ -199,10 +201,12 @@
 static struct clk clk_usbsrc = {
 	.name		= "usbsrc",
 	.id		= -1,
-	.get_rate	= s3c2412_getrate_usbsrc,
-	.set_rate	= s3c2412_setrate_usbsrc,
-	.round_rate	= s3c2412_roundrate_usbsrc,
-	.set_parent	= s3c2412_setparent_usbsrc,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2412_getrate_usbsrc,
+		.set_rate	= s3c2412_setrate_usbsrc,
+		.round_rate	= s3c2412_roundrate_usbsrc,
+		.set_parent	= s3c2412_setparent_usbsrc,
+	},
 };
 
 static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
@@ -225,7 +229,9 @@
 static struct clk clk_msysclk = {
 	.name		= "msysclk",
 	.id		= -1,
-	.set_parent	= s3c2412_setparent_msysclk,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2412_setparent_msysclk,
+	},
 };
 
 static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
@@ -264,7 +270,9 @@
 	.name		= "armclk",
 	.id		= -1,
 	.parent		= &clk_msysclk,
-	.set_parent	= s3c2412_setparent_armclk,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2412_setparent_armclk,
+	},
 };
 
 /* these next clocks have an divider immediately after them,
@@ -337,10 +345,12 @@
 static struct clk clk_uart = {
 	.name		= "uartclk",
 	.id		= -1,
-	.get_rate	= s3c2412_getrate_uart,
-	.set_rate	= s3c2412_setrate_uart,
-	.set_parent	= s3c2412_setparent_uart,
-	.round_rate	= s3c2412_roundrate_clksrc,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2412_getrate_uart,
+		.set_rate	= s3c2412_setrate_uart,
+		.set_parent	= s3c2412_setparent_uart,
+		.round_rate	= s3c2412_roundrate_clksrc,
+	},
 };
 
 static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
@@ -388,10 +398,12 @@
 static struct clk clk_i2s = {
 	.name		= "i2sclk",
 	.id		= -1,
-	.get_rate	= s3c2412_getrate_i2s,
-	.set_rate	= s3c2412_setrate_i2s,
-	.set_parent	= s3c2412_setparent_i2s,
-	.round_rate	= s3c2412_roundrate_clksrc,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2412_getrate_i2s,
+		.set_rate	= s3c2412_setrate_i2s,
+		.set_parent	= s3c2412_setparent_i2s,
+		.round_rate	= s3c2412_roundrate_clksrc,
+	},
 };
 
 static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
@@ -438,10 +450,12 @@
 static struct clk clk_cam = {
 	.name		= "camif-upll",	/* same as 2440 name */
 	.id		= -1,
-	.get_rate	= s3c2412_getrate_cam,
-	.set_rate	= s3c2412_setrate_cam,
-	.set_parent	= s3c2412_setparent_cam,
-	.round_rate	= s3c2412_roundrate_clksrc,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2412_getrate_cam,
+		.set_rate	= s3c2412_setrate_cam,
+		.set_parent	= s3c2412_setparent_cam,
+		.round_rate	= s3c2412_roundrate_clksrc,
+	},
 };
 
 /* standard clock definitions */
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index f8d16fc..e880524 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -20,7 +20,7 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index c9fa3fc..14f4798 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -468,7 +468,7 @@
 /* The platform devices being used. */
 
 static struct platform_device *jive_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 9a5e4341..0392065 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -104,8 +104,7 @@
 
 
 static struct platform_device *smdk2413_devices[] __initdata = {
-	&s3c_device_usb,
-	//&s3c_device_lcd,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index a6ba591..3ca9265 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -121,7 +121,7 @@
 };
 
 static struct platform_device *vstms_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8087935..7f46526 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -15,14 +15,67 @@
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
 
+config CPU_S3C2442
+	bool
+	depends on ARCH_S3C2410
+	select CPU_ARM920T
+	select S3C2410_CLOCK
+	select S3C2410_GPIO
+	select S3C2410_PM if PM
+	select CPU_S3C244X
+	select CPU_LLSERIAL_S3C2440
+	help
+	  Support for S3C2442 Samsung Mobile CPU based systems.
+
+config CPU_S3C244X
+	bool
+	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+	help
+	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
+
+
+config S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+	select S3C2410_CPUFREQ_UTILS
+	default y
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+	bool
+	help
+	  Indicate that the build needs to support 12MHz system
+	  crystal.
+
+config S3C2440_XTAL_16934400
+	bool
+	help
+	  Indicate that the build needs to support 16.9344MHz system
+	  crystal.
+
+config S3C2440_PLL_12000000
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 config S3C2440_DMA
 	bool
 	depends on ARCH_S3C2410 && CPU_S3C24405B
 	help
 	  Support for S3C2440 specific DMA code5A
 
-
-menu "S3C2440 Machines"
+menu "S3C2440 and S3C2442 Machines"
 
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
@@ -37,6 +90,18 @@
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
 
+config MACH_NEO1973_GTA02
+	bool "Openmoko GTA02 / Freerunner phone"
+	select CPU_S3C2442
+	select MFD_PCF50633
+	select PCF50633_GPIO
+	select I2C
+	select POWER_SUPPLY
+	select MACH_NEO1973
+	select S3C2410_PWM
+	help
+	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
 	select CPU_S3C2440
@@ -94,11 +159,14 @@
 
 config SMDK2440_CPU2440
 	bool "SMDK2440 with S3C2440 CPU module"
-	depends on ARCH_S3C2440
 	default y if ARCH_S3C2440
 	select S3C2440_XTAL_16934400
 	select CPU_S3C2440
 
+config SMDK2440_CPU2442
+	bool "SMDM2440 with S3C2442 CPU module"
+	select CPU_S3C2442
+
 config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
 	select CPU_S3C2440
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index 5f32245..c85ba32 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -10,10 +10,20 @@
 obj-				:=
 
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o dsc.o
+obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+
 obj-$(CONFIG_CPU_S3C2440)	+= irq.o
 obj-$(CONFIG_CPU_S3C2440)	+= clock.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma.o
 
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
+
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
 # Machine support
 
 obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
@@ -23,6 +33,7 @@
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
 obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
 obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
 
 # extra machine support
 
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index d1c29b2..3dc2426 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -98,8 +98,10 @@
 static struct clk s3c2440_clk_cam_upll = {
 	.name		= "camif-upll",
 	.id		= -1,
-	.set_rate	= s3c2440_camif_upll_setrate,
-	.round_rate	= s3c2440_camif_upll_round,
+	.ops		= &(struct clk_ops) {
+		.set_rate	= s3c2440_camif_upll_setrate,
+		.round_rate	= s3c2440_camif_upll_round,
+	},
 };
 
 static struct clk s3c2440_clk_ac97 = {
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index e08e081..3b0529f 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -20,7 +20,7 @@
 #include <mach/map.h>
 #include <mach/dma.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index 5540442..9ea66e3 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -28,7 +28,7 @@
 #include <mach/regs-dsc.h>
 
 #include <plat/cpu.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
 
 int s3c2440_set_dsc(unsigned int pin, unsigned int value)
 {
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h
similarity index 100%
rename from arch/arm/mach-s3c2442/include/mach/gta02.h
rename to arch/arm/mach-s3c2440/include/mach/gta02.h
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 62a4c3e..b73f78a 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -409,7 +409,7 @@
 /* Standard Anubis devices */
 
 static struct platform_device *anubis_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_adc,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index aa69290..8472579 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -165,7 +165,7 @@
 	},
 };
 
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
 	.gpio_detect	= S3C2410_GPG(10),
 };
 
@@ -203,7 +203,7 @@
 };
 
 static struct platform_device *at2440evb_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_adc,
 	&s3c_device_i2c0,
@@ -216,8 +216,6 @@
 
 static void __init at2440evb_map_io(void)
 {
-	s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
-
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
 	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
@@ -226,6 +224,7 @@
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+	s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
 	s3c_nand_set_platdata(&at2440evb_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
similarity index 98%
rename from arch/arm/mach-s3c2442/mach-gta02.c
rename to arch/arm/mach-s3c2440/mach-gta02.c
index 0b4a3a0..45799c6 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -544,7 +544,7 @@
 
 
 /* USB */
-static struct s3c2410_hcd_info gta02_usb_info = {
+static struct s3c2410_hcd_info gta02_usb_info __initdata = {
 	.port[0]	= {
 		.flags	= S3C_HCDFLG_USED,
 	},
@@ -565,7 +565,7 @@
 /* These are the guys that don't need to be children of PMU. */
 
 static struct platform_device *gta02_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_sdi,
 	&s3c_device_usbgadget,
@@ -623,9 +623,8 @@
 	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
 #endif
 
-	s3c_device_usb.dev.platform_data = &gta02_usb_info;
-
 	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+	s3c_ohci_set_platdata(&gta02_usb_info);
 	s3c_nand_set_platdata(&gta02_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 2068e90..571b176 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -506,9 +506,8 @@
 };
 
 static struct platform_device *mini2440_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
-/*	&s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
 	&s3c_device_i2c0,
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
@@ -522,8 +521,6 @@
 	&s3c_device_sdi,
 	&s3c_device_iis,
 	&mini2440_audio,
-/*	&s3c_device_timer[0],*/	/* buzzer pwm, no API for it */
-	/* remaining devices are optional */
 };
 
 static void __init mini2440_map_io(void)
@@ -531,8 +528,6 @@
 	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
-
-	s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
 }
 
 /*
@@ -678,6 +673,7 @@
 	}
 
 	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+	s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
 	s3c_nand_set_platdata(&mini2440_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index d43eded..3420415 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -41,7 +41,7 @@
 #include <plat/iic.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -106,7 +106,7 @@
 /* Standard Nexcoder devices */
 
 static struct platform_device *nexcoder_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index a952a13a..1e836e5 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -176,7 +176,7 @@
 };
 
 static struct platform_device *rx3715_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index ec13e74..3ac3d63 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -40,7 +40,7 @@
 #include <plat/iic.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -150,7 +150,7 @@
 };
 
 static struct platform_device *smdk2440_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
rename to arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
index 49f6503..f105d5e 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+/* arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
  *
  * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
rename to arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
index 7679af1..c8a8f90 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+/* arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
  *
  * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index ac1f7ea..2b68f7e 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -29,9 +29,9 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <plat/s3c2440.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/s3c244x.h>
 
 static struct sys_device s3c2440_sysdev = {
 	.cls		= &s3c2440_sysclass,
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2440/s3c2442.c
similarity index 89%
rename from arch/arm/mach-s3c2442/clock.c
rename to arch/arm/mach-s3c2440/s3c2442.c
index ea1aa1f..188ad1e 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -1,10 +1,10 @@
-/* linux/arch/arm/mach-s3c2442/clock.c
+/* linux/arch/arm/mach-s3c2442/s3c2442.c
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2442 Clock support
+ * S3C2442 core and lock support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -109,8 +109,10 @@
 static struct clk s3c2442_clk_cam_upll = {
 	.name		= "camif-upll",
 	.id		= -1,
-	.set_rate	= s3c2442_camif_upll_setrate,
-	.round_rate	= s3c2442_camif_upll_round,
+	.ops		= &(struct clk_ops) {
+		.set_rate	= s3c2442_camif_upll_setrate,
+		.round_rate	= s3c2442_camif_upll_round,
+	},
 };
 
 static int s3c2442_clk_add(struct sys_device *sysdev)
@@ -149,3 +151,15 @@
 }
 
 arch_initcall(s3c2442_clk_init);
+
+
+static struct sys_device s3c2442_sysdev = {
+	.cls		= &s3c2442_sysclass,
+};
+
+int __init s3c2442_init(void)
+{
+	printk("S3C2442: Initialising architecture\n");
+
+	return sysdev_register(&s3c2442_sysdev);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
similarity index 97%
rename from arch/arm/plat-s3c24xx/s3c244x-clock.c
rename to arch/arm/mach-s3c2440/s3c244x-clock.c
index 7937109..f8d9613 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/mach-s3c2440/s3c244x-clock.c
@@ -68,7 +68,9 @@
 static struct clk clk_arm = {
 	.name		= "armclk",
 	.id		= -1,
-	.set_parent	= s3c2440_setparent_armclk,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2440_setparent_armclk,
+	},
 };
 
 static int s3c244x_clk_add(struct sys_device *sysdev)
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/s3c244x-irq.c
rename to arch/arm/mach-s3c2440/s3c244x-irq.c
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/s3c244x.c
rename to arch/arm/mach-s3c2440/s3c244x.c
index 12623a4..5e4a97e 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -38,8 +38,7 @@
 #include <mach/regs-dsc.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
-#include "s3c244x.h"
+#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
deleted file mode 100644
index 8d38118..0000000
--- a/arch/arm/mach-s3c2442/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config CPU_S3C2442
-	bool
-	depends on ARCH_S3C2410
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select S3C2410_GPIO
-	select S3C2410_PM if PM
-	select CPU_S3C244X
-	select CPU_LLSERIAL_S3C2440
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-
-menu "S3C2442 Machines"
-
-config SMDK2440_CPU2442
-	bool "SMDM2440 with S3C2442 CPU module"
-	depends on ARCH_S3C2440
-	select CPU_S3C2442
-
-config MACH_NEO1973_GTA02
-	bool "Openmoko GTA02 / Freerunner phone"
-	select CPU_S3C2442
-	select MFD_PCF50633
-	select PCF50633_GPIO
-	select I2C
-	select POWER_SUPPLY
-	select MACH_NEO1973
-	select S3C2410_PWM
-	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-endmenu
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
deleted file mode 100644
index 2a19113..0000000
--- a/arch/arm/mach-s3c2442/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-# arch/arm/mach-s3c2442/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C2442)	+= clock.o
-
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-
-# Machine support
-
diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
deleted file mode 100644
index 4663bdc..0000000
--- a/arch/arm/mach-s3c2442/s3c2442.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-s3c2442/s3c2442.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2442 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/sysdev.h>
-
-#include <plat/s3c2442.h>
-#include <plat/cpu.h>
-
-static struct sys_device s3c2442_sysdev = {
-	.cls		= &s3c2442_sysclass,
-};
-
-int __init s3c2442_init(void)
-{
-	printk("S3C2442: Initialising architecture\n");
-
-	return sysdev_register(&s3c2442_sysdev);
-}
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 4314c44..698140a 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -7,6 +7,7 @@
 	depends on ARCH_S3C2410
 	select S3C2443_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
+	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 2785d69..62cd4ea 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2443/clock.c
  *
- * Copyright (c) 2007 Simtec Electronics
+ * Copyright (c) 2007, 2010 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2443 Clock control support
@@ -42,6 +42,7 @@
 
 #include <plat/s3c2443.h>
 #include <plat/clock.h>
+#include <plat/clock-clksrc.h>
 #include <plat/cpu.h>
 
 /* We currently have to assume that the system is running
@@ -53,141 +54,69 @@
  * set the correct muxing at initialisation
 */
 
-static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
+static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
 {
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2443_HCLKCON);
+	u32 ctrlbit = clk->ctrlbit;
+	u32 con = __raw_readl(reg);
 
 	if (enable)
-		clkcon |= clocks;
+		con |= ctrlbit;
 	else
-		clkcon &= ~clocks;
+		con &= ~ctrlbit;
 
-	__raw_writel(clkcon, S3C2443_HCLKCON);
-
+	__raw_writel(con, reg);
 	return 0;
 }
 
+static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
+{
+	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
+}
+
 static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
 {
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2443_PCLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2443_PCLKCON);
-
-	return 0;
+	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
 }
 
 static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
 {
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2443_SCLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2443_SCLKCON);
-
-	return 0;
-}
-
-static unsigned long s3c2443_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate,
-					      unsigned int max)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations as they cancel out */
-
-	div = (rate / parent_rate);
-
-	if (div < 1)
-		div = 1;
-	else if (div > max)
-		div = max;
-
-	return parent_rate / div;
-}
-
-static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk,
-					       unsigned long rate)
-{
-	return s3c2443_roundrate_clksrc(clk, rate, 4);
-}
-
-static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk,
-						unsigned long rate)
-{
-	return s3c2443_roundrate_clksrc(clk, rate, 16);
-}
-
-static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
-						 unsigned long rate)
-{
-	return s3c2443_roundrate_clksrc(clk, rate, 256);
+	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
 }
 
 /* clock selections */
 
+/* mpllref is a direct descendant of clk_xtal by default, but it is not
+ * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
+ * such directly equating the two source clocks is impossible.
+ */
 static struct clk clk_mpllref = {
 	.name		= "mpllref",
 	.parent		= &clk_xtal,
 	.id		= -1,
 };
 
-#if 0
-static struct clk clk_mpll = {
-	.name		= "mpll",
-	.parent		= &clk_mpllref,
-	.id		= -1,
-};
-#endif
-
 static struct clk clk_i2s_ext = {
 	.name		= "i2s-ext",
 	.id		= -1,
 };
 
-static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+static struct clk *clk_epllref_sources[] = {
+	[0] = &clk_mpllref,
+	[1] = &clk_mpllref,
+	[2] = &clk_xtal,
+	[3] = &clk_ext,
+};
 
-	clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK;
-
-	if (parent == &clk_xtal)
-		clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL;
-	else if (parent == &clk_ext)
-		clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK;
-	else if (parent != &clk_mpllref)
-		return -EINVAL;
-
-	__raw_writel(clksrc, S3C2443_CLKSRC);
-	clk->parent = parent;
-
-	return 0;
-}
-
-static struct clk clk_epllref = {
-	.name		= "epllref",
-	.id		= -1,
-	.set_parent	= s3c2443_setparent_epllref,
+static struct clksrc_clk clk_epllref = {
+	.clk	= {
+		.name		= "epllref",
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_epllref_sources,
+		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
 };
 
 static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
@@ -205,34 +134,29 @@
 	.name		= "mdivclk",
 	.parent		= &clk_mpllref,
 	.id		= -1,
-	.get_rate	= s3c2443_getrate_mdivclk,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2443_getrate_mdivclk,
+	},
 };
 
-static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+static struct clk *clk_msysclk_sources[] = {
+	[0] = &clk_mpllref,
+	[1] = &clk_mpll,
+	[2] = &clk_mdivclk,
+	[3] = &clk_mpllref,
+};
 
-	clksrc &= ~(S3C2443_CLKSRC_MSYSCLK_MPLL |
-		    S3C2443_CLKSRC_EXTCLK_DIV);
-
-	if (parent == &clk_mpll)
-		clksrc |= S3C2443_CLKSRC_MSYSCLK_MPLL;
-	else if (parent == &clk_mdivclk)
-		clksrc |= S3C2443_CLKSRC_EXTCLK_DIV;
-	else if (parent != &clk_mpllref)
-		return -EINVAL;
-
-	__raw_writel(clksrc, S3C2443_CLKSRC);
-	clk->parent = parent;
-
-	return 0;
-}
-
-static struct clk clk_msysclk = {
-	.name		= "msysclk",
-	.parent		= &clk_xtal,
-	.id		= -1,
-	.set_parent	= s3c2443_setparent_msysclk,
+static struct clksrc_clk clk_msysclk = {
+	.clk	= {
+		.name		= "msysclk",
+		.parent		= &clk_xtal,
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_msysclk_sources,
+		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
 };
 
 /* armdiv
@@ -241,39 +165,105 @@
  * divider values applied to it to then be fed into armclk.
 */
 
+/* armdiv divisor table */
+
+static unsigned int armdiv[16] = {
+	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
+	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
+	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
+	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
+	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
+	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
+	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
+	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
+};
+
+static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
+{
+	clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+
+	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
+}
+
+static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	unsigned long calc;
+	unsigned best = 256; /* bigger than any value */
+	unsigned div;
+	int ptr;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
+		div = armdiv[ptr];
+		calc = parent / div;
+		if (calc <= rate && div < best)
+			best = div;
+	}
+
+	return parent / best;
+}
+
+static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	unsigned long calc;
+	unsigned div;
+	unsigned best = 256; /* bigger than any value */
+	int ptr;
+	int val = -1;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
+		div = armdiv[ptr];
+		calc = parent / div;
+		if (calc <= rate && div < best) {
+			best = div;
+			val = ptr;
+		}
+	}
+
+	if (val >= 0) {
+		unsigned long clkcon0;
+
+		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+		clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+		__raw_writel(clkcon0, S3C2443_CLKDIV0);
+	}
+
+	return (val == -1) ? -EINVAL : 0;
+}
+
 static struct clk clk_armdiv = {
 	.name		= "armdiv",
 	.id		= -1,
-	.parent		= &clk_msysclk,
+	.parent		= &clk_msysclk.clk,
+	.ops		= &(struct clk_ops) {
+		.round_rate = s3c2443_armclk_roundrate,
+		.set_rate = s3c2443_armclk_setrate,
+	},
 };
 
 /* armclk
  *
- * this is the clock fed into the ARM core itself, either from
- * armdiv or from hclk.
+ * this is the clock fed into the ARM core itself, from armdiv or from hclk.
  */
 
-static int s3c2443_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clkdiv0;
+static struct clk *clk_arm_sources[] = {
+	[0] = &clk_armdiv,
+	[1] = &clk_h,
+};
 
-	clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	if (parent == &clk_armdiv)
-		clkdiv0 &= ~S3C2443_CLKDIV0_DVS;
-	else if (parent == &clk_h)
-		clkdiv0 |= S3C2443_CLKDIV0_DVS;
-	else
-		return -EINVAL;
-
-	__raw_writel(clkdiv0, S3C2443_CLKDIV0);
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.set_parent	= s3c2443_setparent_armclk,
+static struct clksrc_clk clk_arm = {
+	.clk	= {
+		.name		= "armclk",
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_arm_sources,
+		.nr_sources = ARRAY_SIZE(clk_arm_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
 };
 
 /* esysclk
@@ -281,28 +271,22 @@
  * this is sourced from either the EPLL or the EPLLref clock
 */
 
-static int s3c2443_setparent_esysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+static struct clk *clk_sysclk_sources[] = {
+	[0] = &clk_epllref.clk,
+	[1] = &clk_epll,
+};
 
-	if (parent == &clk_epll)
-		clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL;
-	else if (parent == &clk_epllref)
-		clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL;
-	else
-		return -EINVAL;
-
-	__raw_writel(clksrc, S3C2443_CLKSRC);
-	clk->parent = parent;
-
-	return 0;
-}
-
-static struct clk clk_esysclk = {
-	.name		= "esysclk",
-	.parent		= &clk_epll,
-	.id		= -1,
-	.set_parent	= s3c2443_setparent_esysclk,
+static struct clksrc_clk clk_esysclk = {
+	.clk	= {
+		.name		= "esysclk",
+		.parent		= &clk_epll,
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_sysclk_sources,
+		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
 };
 
 /* uartclk
@@ -310,83 +294,30 @@
  * UART baud-rate clock sourced from esysclk via a divisor
 */
 
-static unsigned long s3c2443_getrate_uart(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_UARTDIV_MASK;
-	div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-
-static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc16(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_uart = {
-	.name		= "uartclk",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.get_rate	= s3c2443_getrate_uart,
-	.set_rate	= s3c2443_setrate_uart,
-	.round_rate	= s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_uart = {
+	.clk	= {
+		.name		= "uartclk",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
 };
 
+
 /* hsspi
  *
  * high-speed spi clock, sourced from esysclk
 */
 
-static unsigned long s3c2443_getrate_hsspi(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_HSSPIDIV_MASK;
-	div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-
-static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc4(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_hsspi = {
-	.name		= "hsspi",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
-	.enable		= s3c2443_clkcon_enable_s,
-	.get_rate	= s3c2443_getrate_hsspi,
-	.set_rate	= s3c2443_setrate_hsspi,
-	.round_rate	= s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_hsspi = {
+	.clk	= {
+		.name		= "hsspi",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
+		.enable		= s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
 };
 
 /* usbhost
@@ -394,41 +325,15 @@
  * usb host bus-clock, usually 48MHz to provide USB bus clock timing
 */
 
-static unsigned long s3c2443_getrate_usbhost(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK;
-	div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc4(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_usb_bus_host = {
-	.name		= "usb-bus-host-parent",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.ctrlbit	= S3C2443_SCLKCON_USBHOST,
-	.enable		= s3c2443_clkcon_enable_s,
-	.get_rate	= s3c2443_getrate_usbhost,
-	.set_rate	= s3c2443_setrate_usbhost,
-	.round_rate	= s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_usb_bus_host = {
+	.clk	= {
+		.name		= "usb-bus-host-parent",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
+		.enable		= s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
 };
 
 /* clk_hsmcc_div
@@ -438,39 +343,13 @@
  * be fed to the hsmmc block
 */
 
-static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_HSMMCDIV_MASK;
-	div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc4(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_hsmmc_div = {
-	.name		= "hsmmc-div",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.get_rate	= s3c2443_getrate_hsmmc_div,
-	.set_rate	= s3c2443_setrate_hsmmc_div,
-	.round_rate	= s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_hsmmc_div = {
+	.clk	= {
+		.name		= "hsmmc-div",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
 };
 
 static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
@@ -503,82 +382,55 @@
 static struct clk clk_hsmmc = {
 	.name		= "hsmmc-if",
 	.id		= -1,
-	.parent		= &clk_hsmmc_div,
+	.parent		= &clk_hsmmc_div.clk,
 	.enable		= s3c2443_enable_hsmmc,
-	.set_parent	= s3c2443_setparent_hsmmc,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2443_setparent_hsmmc,
+	},
 };
 
 /* i2s_eplldiv
  *
- * this clock is the output from the i2s divisor of esysclk
+ * This clock is the output from the I2S divisor of ESYSCLK, and is seperate
+ * from the mux that comes after it (cannot merge into one single clock)
 */
 
-static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_I2SDIV_MASK;
-	div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc16(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_i2s_eplldiv = {
-	.name		= "i2s-eplldiv",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.get_rate	= s3c2443_getrate_i2s_eplldiv,
-	.set_rate	= s3c2443_setrate_i2s_eplldiv,
-	.round_rate	= s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_i2s_eplldiv = {
+	.clk	= {
+		.name		= "i2s-eplldiv",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
 };
 
 /* i2s-ref
  *
  * i2s bus reference clock, selectable from external, esysclk or epllref
+ *
+ * Note, this used to be two clocks, but was compressed into one.
 */
 
-static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+struct clk *clk_i2s_srclist[] = {
+	[0] = &clk_i2s_eplldiv.clk,
+	[1] = &clk_i2s_ext,
+	[2] = &clk_epllref.clk,
+	[3] = &clk_epllref.clk,
+};
 
-	clksrc &= ~S3C2443_CLKSRC_I2S_MASK;
+static struct clksrc_clk clk_i2s = {
+	.clk	= {
+		.name		= "i2s-if",
+		.id		= -1,
+		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
+		.enable		= s3c2443_clkcon_enable_s,
 
-	if (parent == &clk_epllref)
-		clksrc |= S3C2443_CLKSRC_I2S_EPLLREF;
-	else if (parent == &clk_i2s_ext)
-		clksrc |= S3C2443_CLKSRC_I2S_EXT;
-	else if (parent != &clk_i2s_eplldiv)
-		return -EINVAL;
-
-	clk->parent = parent;
-	__raw_writel(clksrc, S3C2443_CLKSRC);
-
-	return 0;
-}
-
-static struct clk clk_i2s = {
-	.name		= "i2s-if",
-	.id		= -1,
-	.parent		= &clk_i2s_eplldiv,
-	.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-	.enable		= s3c2443_clkcon_enable_s,
-	.set_parent	= s3c2443_setparent_i2s,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_i2s_srclist,
+		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
 };
 
 /* cam-if
@@ -586,41 +438,15 @@
  * camera interface bus-clock, divided down from esysclk
 */
 
-static unsigned long s3c2443_getrate_cam(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div  &= S3C2443_CLKDIV1_CAMDIV_MASK;
-	div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc16(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK;
-	clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT;
-
-	__raw_writel(clkdiv1, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_cam = {
-	.name		= "camif-upll",		/* same as 2440 name */
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
-	.enable		= s3c2443_clkcon_enable_s,
-	.get_rate	= s3c2443_getrate_cam,
-	.set_rate	= s3c2443_setrate_cam,
-	.round_rate	= s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_cam = {
+	.clk	= {
+		.name		= "camif-upll",	/* same as 2440 name */
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+		.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
+		.enable		= s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
 };
 
 /* display-if
@@ -628,41 +454,15 @@
  * display interface clock, divided from esysclk
 */
 
-static unsigned long s3c2443_getrate_display(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_DISPDIV_MASK;
-	div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_display(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc256(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_display = {
-	.name		= "display-if",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
-	.enable		= s3c2443_clkcon_enable_s,
-	.get_rate	= s3c2443_getrate_display,
-	.set_rate	= s3c2443_setrate_display,
-	.round_rate	= s3c2443_roundrate_clksrc256,
+static struct clksrc_clk clk_display = {
+	.clk	= {
+		.name		= "display-if",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+		.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
+		.enable		= s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
 };
 
 /* prediv
@@ -684,8 +484,10 @@
 static struct clk clk_prediv = {
 	.name		= "prediv",
 	.id		= -1,
-	.parent		= &clk_msysclk,
-	.get_rate	= s3c2443_prediv_getrate,
+	.parent		= &clk_msysclk.clk,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2443_prediv_getrate,
+	},
 };
 
 /* standard clock definitions */
@@ -857,7 +659,7 @@
 	}, {
 		.name		= "usb-bus-host",
 		.id		= -1,
-		.parent		= &clk_usb_bus_host,
+		.parent		= &clk_usb_bus_host.clk,
 	}, {
 		.name		= "ac97",
 		.id		= -1,
@@ -868,103 +670,26 @@
 
 /* clocks to add where we need to check their parentage */
 
-/* s3c2443_clk_initparents
- *
- * Initialise the parents for the clocks that we get at start-time
-*/
-
-static int __init clk_init_set_parent(struct clk *clk, struct clk *parent)
-{
-	printk(KERN_DEBUG "clock %s: parent %s\n", clk->name, parent->name);
-	return clk_set_parent(clk, parent);
-}
+static struct clksrc_clk __initdata *init_list[] = {
+	&clk_epllref, /* should be first */
+	&clk_esysclk,
+	&clk_msysclk,
+	&clk_arm,
+	&clk_i2s_eplldiv,
+	&clk_i2s,
+	&clk_cam,
+	&clk_uart,
+	&clk_display,
+	&clk_hsmmc_div,
+	&clk_usb_bus_host,
+};
 
 static void __init s3c2443_clk_initparents(void)
 {
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
-	struct clk *parent;
+	int ptr;
 
-	switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) {
-	case S3C2443_CLKSRC_EPLLREF_EXTCLK:
-		parent = &clk_ext;
-		break;
-
-	case S3C2443_CLKSRC_EPLLREF_XTAL:
-	default:
-		parent = &clk_xtal;
-		break;
-
-	case S3C2443_CLKSRC_EPLLREF_MPLLREF:
-	case S3C2443_CLKSRC_EPLLREF_MPLLREF2:
-		parent = &clk_mpllref;
-		break;
-	}
-
-	clk_init_set_parent(&clk_epllref, parent);
-
-	switch (clksrc & S3C2443_CLKSRC_I2S_MASK) {
-	case S3C2443_CLKSRC_I2S_EXT:
-		parent = &clk_i2s_ext;
-		break;
-
-	case S3C2443_CLKSRC_I2S_EPLLDIV:
-	default:
-		parent = &clk_i2s_eplldiv;
-		break;
-
-	case S3C2443_CLKSRC_I2S_EPLLREF:
-	case S3C2443_CLKSRC_I2S_EPLLREF3:
-		parent = &clk_epllref;
-	}
-
-	clk_init_set_parent(&clk_i2s, &clk_epllref);
-
-	/* esysclk source */
-
-	parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ?
-		&clk_epll : &clk_epllref;
-
-	clk_init_set_parent(&clk_esysclk, parent);
-
-	/* msysclk source */
-
-	if (clksrc & S3C2443_CLKSRC_MSYSCLK_MPLL) {
-		parent = &clk_mpll;
-	} else {
-		parent = (clksrc & S3C2443_CLKSRC_EXTCLK_DIV) ?
-			&clk_mdivclk : &clk_mpllref;
-	}
-
-	clk_init_set_parent(&clk_msysclk, parent);
-
-	/* arm */
-
-	if (__raw_readl(S3C2443_CLKDIV0) & S3C2443_CLKDIV0_DVS)
-		parent = &clk_h;
-	else
-		parent = &clk_armdiv;
-
-	clk_init_set_parent(&clk_arm, parent);
-}
-
-/* armdiv divisor table */
-
-static unsigned int armdiv[16] = {
-	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
-	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
-	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
-	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
-	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
-	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
-	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
-	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
-};
-
-static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
-{
-	clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
-
-	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
+	for (ptr = 0; ptr < ARRAY_SIZE(init_list); ptr++)
+		s3c_set_clksrc(init_list[ptr], true);
 }
 
 static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
@@ -976,15 +701,12 @@
 
 /* clocks to add straight away */
 
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
+static struct clksrc_clk *clksrcs[] __initdata = {
 	&clk_usb_bus_host,
-	&clk_usb_bus,
-	&clk_esysclk,
 	&clk_epllref,
-	&clk_mpllref,
+	&clk_esysclk,
 	&clk_msysclk,
+	&clk_arm,
 	&clk_uart,
 	&clk_display,
 	&clk_cam,
@@ -992,9 +714,15 @@
 	&clk_i2s,
 	&clk_hsspi,
 	&clk_hsmmc_div,
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_usb_bus,
+	&clk_mpllref,
 	&clk_hsmmc,
 	&clk_armdiv,
-	&clk_arm,
 	&clk_prediv,
 };
 
@@ -1014,7 +742,7 @@
 	clk_put(xtal_clk);
 
 	pll = s3c2443_get_mpll(mpllcon, xtal);
-	clk_msysclk.rate = pll;
+	clk_msysclk.clk.rate = pll;
 
 	fclk = pll / s3c2443_fclk_div(clkdiv0);
 	hclk = s3c2443_prediv_getrate(&clk_prediv);
@@ -1056,15 +784,18 @@
 		}
 	}
 
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_register_clksrc(clksrcs[ptr], 1);
+
 	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-	clk_epll.parent = &clk_epllref;
-	clk_usb_bus.parent = &clk_usb_bus_host;
+	clk_epll.parent = &clk_epllref.clk;
+	clk_usb_bus.parent = &clk_usb_bus_host.clk;
 
 	/* ensure usb bus clock is within correct rate of 48MHz */
 
-	if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) {
+	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
 		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
-		clk_set_rate(&clk_usb_bus_host, 48*1000*1000);
+		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
 	}
 
 	printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
@@ -1074,14 +805,7 @@
 
 	/* register clocks from clock array */
 
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
 	/* We must be careful disabling the clocks we are not intending to
 	 * be using at boot time, as subsystems such as the LCD which do
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 397f3b5..3f65868 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -20,7 +20,7 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 039a462..e2e362b 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -40,7 +40,7 @@
 #include <plat/iic.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -106,6 +106,9 @@
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_hsmmc0,
+#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
+	&s3c_device_ac97,
+#endif
 };
 
 static void __init smdk2443_map_io(void)
@@ -118,6 +121,11 @@
 static void __init smdk2443_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+
+#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
+	s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0);
+#endif
+
 	platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
 	smdk_machine_init();
 }
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s3c24a0/include/mach/io.h
similarity index 72%
rename from arch/arm/plat-s3c/include/mach/io.h
rename to arch/arm/mach-s3c24a0/include/mach/io.h
index f6a5363..4326c30 100644
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ b/arch/arm/mach-s3c24a0/include/mach/io.h
@@ -1,9 +1,9 @@
-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s3c24a0/include/mach/io.h
  *
  * Copyright 2008 Simtec Electronics
  *	Ben Dooks <ben-linux@fluff.org>
  *
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S3C24A0
  */
 
 #ifndef __ASM_ARM_ARCH_IO_H
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
deleted file mode 100644
index a250bf6..0000000
--- a/arch/arm/mach-s3c6400/Kconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6400
-	bool
-	select CPU_S3C6400_INIT
-	select CPU_S3C6400_CLOCK
-	help
-	  Enable S3C6400 CPU support
-
-config S3C6400_SETUP_SDHCI
-	bool
-	help
-	  Internal configuration for default SDHCI
-	  setup for S3C6400.
-
-# S36400 Macchine support
-
-config MACH_SMDK6400
-       bool "SMDK6400"
-	select CPU_S3C6400
-	select S3C_DEV_HSMMC
-	select S3C_DEV_NAND
-	select S3C6400_SETUP_SDHCI
-	help
-	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
deleted file mode 100644
index df1ce4a..0000000
--- a/arch/arm/mach-s3c6400/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-# arch/arm/mach-s3c6400/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S3C6400 system
-
-obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
-
-# setup support
-
-obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
deleted file mode 100644
index 6723860..0000000
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#define S3C_DMA_CHANNELS	(16)
-
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
-
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
-enum dma_ch {
-	/* DMA0/SDMA0 */
-	DMACH_UART0 = 0,
-	DMACH_UART0_SRC2,
-	DMACH_UART1,
-	DMACH_UART1_SRC2,
-	DMACH_UART2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,
-	DMACH_UART3_SRC2,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_I2S0_OUT,
-	DMACH_I2S0_IN,
-	DMACH_SPI0_TX,
-	DMACH_SPI0_RX,
-	DMACH_HSI_I2SV40_TX,
-	DMACH_HSI_I2SV40_RX,
-
-	/* DMA1/SDMA1 */
-	DMACH_PCM1_TX = 16,
-	DMACH_PCM1_RX,
-	DMACH_I2S1_OUT,
-	DMACH_I2S1_IN,
-	DMACH_SPI1_TX,
-	DMACH_SPI1_RX,
-	DMACH_AC97_PCMOUT,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_MICIN,
-	DMACH_PWM,
-	DMACH_IRDA,
-	DMACH_EXTERNAL,
-	DMACH_RES1,
-	DMACH_RES2,
-	DMACH_SECURITY_RX,	/* SDMA1 only */
-	DMACH_SECURITY_TX,	/* SDMA1 only */
-	DMACH_MAX		/* the end */
-};
-
-static __inline__ bool s3c_dma_has_circular(void)
-{
-	return true;
-}
-
-#define S3C2410_DMAF_CIRCULAR		(1 << 0)
-
-#include <plat/dma.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/entry-macro.S b/arch/arm/mach-s3c6400/include/mach/entry-macro.S
deleted file mode 100644
index fbd90d2..0000000
--- a/arch/arm/mach-s3c6400/include/mach/entry-macro.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Low-level IRQ helper macros for the Samsung S3C64XX series
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =S3C_VA_VIC0
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	@ check the vic0
-	mov	\irqnr, # S3C_IRQ_OFFSET + 31
-	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
-	teq	\irqstat, #0
-
-	@ otherwise try vic1
-	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio-core.h b/arch/arm/mach-s3c6400/include/mach/gpio-core.h
deleted file mode 100644
index d89aae6..0000000
--- a/arch/arm/mach-s3c6400/include/mach/gpio-core.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/gpio-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIO core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-/* currently we just include the platform support */
-#include <plat/gpio-core.h>
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/irqs.h b/arch/arm/mach-s3c6400/include/mach/irqs.h
deleted file mode 100644
index 4c97f9a..0000000
--- a/arch/arm/mach-s3c6400/include/mach/irqs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - IRQ definitions
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
deleted file mode 100644
index a6c7f4e..0000000
--- a/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - clock register compatibility with s3c24xx
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/regs-clock.h>
-
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
deleted file mode 100644
index 162f456..0000000
--- a/arch/arm/mach-s3c6410/Kconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6410
-	bool
-	select CPU_S3C6400_INIT
-	select CPU_S3C6400_CLOCK
-	help
-	  Enable S3C6410 CPU support
-
-config S3C6410_SETUP_SDHCI
-	bool
-	select S3C64XX_SETUP_SDHCI_GPIO
-	help
-	  Internal helper functions for S3C6410 based SDHCI systems
-
-config MACH_ANW6410
-	bool "A&W6410"
-	select CPU_S3C6410
-	select S3C_DEV_FB
-	select S3C64XX_SETUP_FB_24BPP
-	help
-	  Machine support for the A&W6410
-
-config MACH_SMDK6410
-	bool "SMDK6410"
-	select CPU_S3C6410
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_I2C1
-	select S3C_DEV_FB
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
-	select S3C6410_SETUP_SDHCI
-	select S3C64XX_SETUP_I2C1
-	select S3C64XX_SETUP_FB_24BPP
-	help
-	  Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
-	prompt "SMDK6410 MMC/SD slot setup"
-	depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
-	bool "Use channel 0 only"
-	depends on MACH_SMDK6410
-	help
-          Select CON7 (channel 0) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-       
-config SMDK6410_SD_CH1
-	bool "Use channel 1 only"
-	depends on MACH_SMDK6410
-	help
-          Select CON6 (channel 1) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
-	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
-	depends on MACH_SMDK6410
-	select REGULATOR
-	select REGULATOR_WM8350
-	select S3C24XX_GPIO_EXTRA64
-	select MFD_WM8350_I2C
-	select MFD_WM8350_CONFIG_MODE_0
-	select MFD_WM8350_CONFIG_MODE_3
-	select MFD_WM8352_CONFIG_MODE_0
-	help
-	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
-	  and audio daughtercard for the Samsung SMDK6410 reference
-	  platform.  Enabling this option will build support for this
-	  module into the kernel.  The presence of the module will be
-	  detected at runtime so the the resulting kernel can be used
-	  with or without the 1190-EV1 fitted.
-
-config MACH_NCP
-	bool "NCP"
-	select CPU_S3C6410
-	select S3C_DEV_I2C1
-	select S3C_DEV_HSMMC1
-	select S3C64XX_SETUP_I2C1
-	help
-          Machine support for the Samsung NCP
-
-config MACH_HMT
-	bool "Airgoo HMT"
-	select CPU_S3C6410
-	select S3C_DEV_FB
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select S3C64XX_SETUP_FB_24BPP
-	select HAVE_PWM
-	help
-	  Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
deleted file mode 100644
index 3e48c3d..0000000
--- a/arch/arm/mach-s3c6410/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-# arch/arm/plat-s3c6410/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S3C6410 system
-
-obj-$(CONFIG_CPU_S3C6410)	+= cpu.o
-
-# Helper and device support
-
-obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
-
-# machine support
-
-obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
-obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
-obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
-obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
deleted file mode 100644
index 816d2d9..0000000
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c6410_hsmmc_clksrcs[4] = {
-	[0] = "hsmmc",
-	[1] = "hsmmc",
-	[2] = "mmc_bus",
-	/* [3] = "48m", - note not successfully used yet */
-};
-
-
-void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
-				    void __iomem *r,
-				    struct mmc_ios *ios,
-				    struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything acording to card-type */
-
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
new file mode 100644
index 0000000..959df38
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -0,0 +1,180 @@
+# Copyright 2008 Openmoko, Inc.
+#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+#
+# Licensed under GPLv2
+
+# temporary until we can eliminate all drivers using it.
+config PLAT_S3C64XX
+	bool
+	depends on ARCH_S3C64XX
+	default y
+	help
+	  Base platform code for any Samsung S3C64XX device
+
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+	bool
+	help
+	  Enable S3C6400 CPU support
+
+config CPU_S3C6410
+	bool
+	help
+	  Enable S3C6410 CPU support
+
+config S3C64XX_DMA
+	bool "S3C64XX DMA"
+	select S3C_DMA
+
+config S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Internal configuration for default SDHCI setup for S3C6400 and
+	  S3C6410 SoCs.
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+       bool "SMDK6400"
+	select CPU_S3C6400
+	select S3C_DEV_HSMMC
+	select S3C_DEV_NAND
+	select S3C64XX_SETUP_SDHCI
+	help
+	  Machine support for the Samsung SMDK6400
+
+# S3C6410 machine support
+
+config MACH_ANW6410
+	bool "A&W6410"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the A&W6410
+
+config MACH_SMDK6410
+	bool "SMDK6410"
+	select CPU_S3C6410
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_I2C1
+	select S3C_DEV_FB
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+	prompt "SMDK6410 MMC/SD slot setup"
+	depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+	bool "Use channel 0 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON7 (channel 0) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+config SMDK6410_SD_CH1
+	bool "Use channel 1 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON6 (channel 1) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+endchoice
+
+config SMDK6410_WM1190_EV1
+	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM8350
+	select S3C24XX_GPIO_EXTRA64
+	select MFD_WM8350_I2C
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8350_CONFIG_MODE_3
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+	  and audio daughtercard for the Samsung SMDK6410 reference
+	  platform.  Enabling this option will build support for this
+	  module into the kernel.  The presence of the module will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1190-EV1 fitted.
+
+config SMDK6410_WM1192_EV1
+	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM831X
+	select S3C24XX_GPIO_EXTRA64
+	select MFD_WM831X
+	help
+	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
+	  daughtercard for the Samsung SMDK6410 reference platform.
+	  Enabling this option will build support for this module into
+	  the kernel.  The presence of the daughtercard will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1192-EV1 fitted.
+
+config MACH_NCP
+	bool "NCP"
+	select CPU_S3C6410
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_I2C1
+	help
+          Machine support for the Samsung NCP
+
+config MACH_HMT
+	bool "Airgoo HMT"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	select S3C64XX_SETUP_FB_24BPP
+	select HAVE_PWM
+	help
+	  Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
new file mode 100644
index 0000000..3758e15
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -0,0 +1,62 @@
+# arch/arm/mach-s3c64xx/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core files
+obj-y				+= cpu.o
+obj-y				+= clock.o
+obj-y				+= gpiolib.o
+
+# Core support for S3C6400 system
+
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
+obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
+
+obj-y				+= irq.o
+obj-y				+= irq-eint.o
+
+# CPU frequency scaling
+
+obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+
+# Device setup
+
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+
+# PM
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_PM)		+= irq-pm.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
+obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
+obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
+
+# device support
+
+obj-y				+= dev-uart.o
+obj-y				+= dev-rtc.o
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C_ADC)		+= dev-adc.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
diff --git a/arch/arm/mach-s3c6400/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot
similarity index 100%
rename from arch/arm/mach-s3c6400/Makefile.boot
rename to arch/arm/mach-s3c64xx/Makefile.boot
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
new file mode 100644
index 0000000..2ac2e7d
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -0,0 +1,809 @@
+/* linux/arch/arm/plat-s3c64xx/clock.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX Base clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <mach/regs-sys.h>
+#include <mach/regs-clock.h>
+#include <mach/pll.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+
+#define clk_fout_mpll	clk_mpll
+#define clk_fout_epll	clk_epll
+
+struct clk clk_h2 = {
+	.name		= "hclk2",
+	.id		= -1,
+	.rate		= 0,
+};
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S3C64XX_OTHERS);
+	if (enable)
+		val |= S3C64XX_OTHERS_USBMASK;
+	else
+		val &= ~S3C64XX_OTHERS_USBMASK;
+
+	__raw_writel(val, S3C64XX_OTHERS);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+static int inline s3c64xx_gate(void __iomem *reg,
+				struct clk *clk,
+				int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+
+	__raw_writel(con, reg);
+	return 0;
+}
+
+static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
+}
+
+static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
+}
+
+int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
+	}, {
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
+	}, {
+#ifdef CONFIG_CPU_S3C6410
+		.name		= "iis",
+		.id		= -1,  /* There's only one IISv4 port */
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C6410_CLKCON_PCLK_IIS2,
+	}, {
+#endif
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
+	}, {
+		.name		= "spi_48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SPI0_48,
+	}, {
+		.name		= "spi_48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SPI1_48,
+	}, {
+		.name		= "48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
+	}, {
+		.name		= "48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
+	}, {
+		.name		= "48m",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
+	}, {
+		.name		= "dma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
+	}, {
+		.name		= "dma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
+	},
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
+	}
+};
+
+
+static struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+static struct clksrc_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 0, .size = 1  },
+	.sources	= &clk_src_apll,
+};
+
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+static struct clksrc_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 2, .size = 1  },
+	.sources	= &clk_src_epll,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+static struct clksrc_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 1, .size = 1  },
+	.sources	= &clk_src_mpll,
+};
+
+static unsigned int armclk_mask;
+
+static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
+
+	return rate / (clkdiv + 1);
+}
+
+static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+
+	if (parent < rate)
+		return parent;
+
+	div = (parent / rate) - 1;
+	if (div > armclk_mask)
+		div = armclk_mask;
+
+	return parent / (div + 1);
+}
+
+static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+	u32 val;
+
+	if (rate < parent / (armclk_mask + 1))
+		return -EINVAL;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+
+	val = __raw_readl(S3C_CLK_DIV0);
+	val &= ~armclk_mask;
+	val |= (div - 1);
+	__raw_writel(val, S3C_CLK_DIV0);
+
+	return 0;
+
+}
+
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c64xx_clk_arm_get_rate,
+		.set_rate	= s3c64xx_clk_arm_set_rate,
+		.round_rate	= s3c64xx_clk_arm_round_rate,
+	},
+};
+
+static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
+		rate /= 2;
+
+	return rate;
+}
+
+static struct clk_ops clk_dout_ops = {
+	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
+};
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.ops		= &clk_dout_ops,
+};
+
+static struct clk *clkset_spi_mmc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_27m,
+};
+
+static struct clksrc_sources clkset_spi_mmc = {
+	.sources	= clkset_spi_mmc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
+};
+
+static struct clk *clkset_irda_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	&clk_27m,
+};
+
+static struct clksrc_sources clkset_irda = {
+	.sources	= clkset_irda_list,
+	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	NULL
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_uhost_list[] = {
+	&clk_48m,
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_uhost = {
+	.sources	= clkset_uhost_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
+};
+
+/* The peripheral clocks are all controlled via clocksource followed
+ * by an optional divider and gate stage. We currently roll this into
+ * one clock which hides the intermediate clock from the mux.
+ *
+ * Note, the JPEG clock can only be an even divider...
+ *
+ * The scaler and LCD clocks depend on the S3C64XX version, and also
+ * have a common parent divisor so are not included here.
+ */
+
+/* clocks that feed other parts of the clock source tree */
+
+static struct clk clk_iis_cd0 = {
+	.name		= "iis_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_iis_cd1 = {
+	.name		= "iis_cdclk1",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd = {
+	.name		= "pcm_cdclk",
+	.id		= -1,
+};
+
+static struct clk *clkset_audio0_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_dout_mpll,
+	[2] = &clk_fin_epll,
+	[3] = &clk_iis_cd0,
+	[4] = &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio0 = {
+	.sources	= clkset_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
+};
+
+static struct clk *clkset_audio1_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_dout_mpll,
+	[2] = &clk_fin_epll,
+	[3] = &clk_iis_cd1,
+	[4] = &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio1 = {
+	.sources	= clkset_audio1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
+};
+
+static struct clk *clkset_camif_list[] = {
+	&clk_h2,
+};
+
+static struct clksrc_sources clkset_camif = {
+	.sources	= clkset_camif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 18, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 20, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 22, .size = 2  },
+		.reg_div 	= { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "usb-bus-host",
+			.id		= -1,
+			.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src 	= { .reg = S3C_CLK_SRC, .shift = 5, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4  },
+		.sources	= &clkset_uhost,
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit        = S3C_CLKCON_SCLK_UART,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
+		.sources	= &clkset_uart,
+	}, {
+/* Where does UCLK0 come from? */
+		.clk	= {
+			.name		= "spi-bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_SPI0,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 14, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "spi-bus",
+			.id		= 1,
+			.ctrlbit        = S3C_CLKCON_SCLK_SPI1,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 16, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_AUDIO0,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 7, .size = 3  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4  },
+		.sources	= &clkset_audio0,
+	}, {
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 1,
+			.ctrlbit        = S3C_CLKCON_SCLK_AUDIO1,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 10, .size = 3  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4  },
+		.sources	= &clkset_audio1,
+	}, {
+		.clk	= {
+			.name		= "irda-bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 24, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4  },
+		.sources	= &clkset_irda,
+	}, {
+		.clk	= {
+			.name		= "camera",
+			.id		= -1,
+			.ctrlbit        = S3C_CLKCON_SCLK_CAM,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_div	= { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4  },
+		.reg_src	= { .reg = NULL, .shift = 0, .size = 0  },
+		.sources	= &clkset_camif,
+	},
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+};
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s3c6400_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk2;
+	unsigned long pclk;
+	unsigned long epll;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned int ptr;
+	u32 clkdiv0;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	/* For now assume the mux always selects the crystal */
+	clk_ext_xtal_mux.parent = xtal_clk;
+
+	epll = s3c6400_get_epll(xtal);
+	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
+	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
+
+	fclk = mpll;
+
+	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
+	       apll, mpll, epll);
+
+	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
+	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
+
+	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
+	       hclk2, hclk, pclk);
+
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_apll.rate = apll;
+
+	clk_h2.rate = hclk2;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+	clk_f.rate = fclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s3c_set_clksrc(init_parents[ptr], true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks1[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_iis_cd0,
+	&clk_iis_cd1,
+	&clk_pcm_cd,
+	&clk_mout_epll.clk,
+	&clk_mout_mpll.clk,
+	&clk_dout_mpll,
+	&clk_arm,
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+	&clk_h2,
+};
+
+/**
+ * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
+ * @xtal: The rate for the clock crystal feeding the PLLs.
+ * @armclk_divlimit: Divisor mask for ARMCLK.
+ *
+ * Register the clocks for the S3C6400 and S3C6410 SoC range, such
+ * as ARMCLK as well as the necessary parent clocks.
+ *
+ * This call does not setup the clocks, which is left to the
+ * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * or resume code to re-set the clocks if the bootloader has changed
+ * them.
+ */
+void __init s3c64xx_register_clocks(unsigned long xtal, 
+				    unsigned armclk_divlimit)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	armclk_mask = armclk_divlimit;
+
+	s3c24xx_register_baseclocks(xtal);
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
similarity index 89%
rename from arch/arm/plat-s3c64xx/cpu.c
rename to arch/arm/mach-s3c64xx/cpu.c
index 49796d2..374e45e 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -33,8 +33,8 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
 
 /* table of supported CPUs */
 
@@ -73,17 +73,22 @@
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S3C_VA_MEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SROM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
 		.pfn		= __phys_to_pfn(S3C_PA_UART),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S3C_VA_VIC0,
+		.virtual	= (unsigned long)VA_VIC0,
 		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S3C_VA_VIC1,
+		.virtual	= (unsigned long)VA_VIC1,
 		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
@@ -124,6 +129,12 @@
 	.cls	= &s3c64xx_sysclass,
 };
 
+/* uart registration process */
+
+void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
 
 /* read cpu identification code */
 
diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/mach-s3c64xx/cpufreq.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/cpufreq.c
rename to arch/arm/mach-s3c64xx/cpufreq.c
diff --git a/arch/arm/mach-s3c64xx/dev-adc.c b/arch/arm/mach-s3c64xx/dev-adc.c
new file mode 100644
index 0000000..fafef9b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-adc.c
@@ -0,0 +1,46 @@
+/* linux/arch/arm/plat-s3c64xx/dev-adc.c
+ *
+ * Copyright 2010 Maurus Cuelenaere
+ *
+ * S3C64xx series device definition for ADC device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/adc.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_adc_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_ADC,
+		.end   = S3C64XX_PA_ADC + SZ_256 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TC,
+		.end   = IRQ_TC,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_adc = {
+	.name		= "s3c64xx-adc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
+	.resource	= s3c_adc_resource,
+};
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
new file mode 100644
index 0000000..c3e9e73
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -0,0 +1,335 @@
+/* linux/arch/arm/plat-s3c/dev-audio.c
+ *
+ * Copyright 2009 Wolfson Microelectronics
+ *      Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/gpio.h>
+
+#include <plat/devs.h>
+#include <plat/audio.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/gpio-bank-c.h>
+#include <mach/gpio-bank-d.h>
+#include <mach/gpio-bank-e.h>
+#include <mach/gpio-bank-h.h>
+
+static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI);
+		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0);
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI);
+		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0);
+	default:
+		printk(KERN_DEBUG "Invalid I2S Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0);
+	s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1);
+	s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2);
+	s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI);
+
+	return 0;
+}
+
+static struct resource s3c64xx_iis0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS0,
+		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_OUT,
+		.end   = DMACH_I2S0_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_IN,
+		.end   = DMACH_I2S0_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2s0_pdata = {
+	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis0 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
+	.resource	  = s3c64xx_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iis0);
+
+static struct resource s3c64xx_iis1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS1,
+		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S1_OUT,
+		.end   = DMACH_I2S1_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S1_IN,
+		.end   = DMACH_I2S1_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2s1_pdata = {
+	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
+	.resource	  = s3c64xx_iis1_resource,
+	.dev = {
+		.platform_data = &s3c_i2s1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iis1);
+
+static struct resource s3c64xx_iisv4_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IISV4,
+		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_HSI_I2SV40_TX,
+		.end   = DMACH_HSI_I2SV40_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_HSI_I2SV40_RX,
+		.end   = DMACH_HSI_I2SV40_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2sv4_pdata = {
+	.cfg_gpio = s3c64xx_i2sv4_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iisv4 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
+	.resource	  = s3c64xx_iisv4_resource,
+	.dev = {
+		.platform_data = &s3c_i2sv4_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iisv4);
+
+
+/* PCM Controller platform_devices */
+
+static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s3c64xx_pcm0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM0,
+		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm0_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
+	.resource	  = s3c64xx_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm0);
+
+static struct resource s3c64xx_pcm1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM1,
+		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm1_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
+	.resource	  = s3c64xx_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm1);
+
+/* AC97 Controller platform devices */
+
+static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_AC97_BITCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_AC97_nRESET);
+	s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_AC97_SYNC);
+	s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_AC97_SDI);
+	s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_AC97_SDO);
+
+	return 0;
+}
+
+static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_AC97_BITCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_AC97_nRESET);
+	s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_AC97_SYNC);
+	s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_AC97_SDI);
+	s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_AC97_SDO);
+
+	return 0;
+}
+
+static struct resource s3c64xx_ac97_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_AC97,
+		.end   = S3C64XX_PA_AC97 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_AC97_PCMOUT,
+		.end   = DMACH_AC97_PCMOUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_AC97_PCMIN,
+		.end   = DMACH_AC97_PCMIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = DMACH_AC97_MICIN,
+		.end   = DMACH_AC97_MICIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.start = IRQ_AC97,
+		.end   = IRQ_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata;
+
+static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_ac97_resource),
+	.resource	  = s3c64xx_ac97_resource,
+	.dev = {
+		.platform_data = &s3c_ac97_pdata,
+		.dma_mask = &s3c64xx_ac97_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_ac97);
+
+void __init s3c64xx_ac97_setup_gpio(int num)
+{
+	if (num == S3C64XX_AC97_GPD)
+		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
+	else
+		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
+}
diff --git a/arch/arm/mach-s3c64xx/dev-rtc.c b/arch/arm/mach-s3c64xx/dev-rtc.c
new file mode 100644
index 0000000..b9e7a05
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-rtc.c
@@ -0,0 +1,43 @@
+/* linux/arch/arm/plat-s3c64xx/dev-rtc.c
+ *
+ * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_rtc_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_RTC,
+		.end   = S3C64XX_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC_ALARM,
+		.end   = IRQ_RTC_ALARM,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_RTC_TIC,
+		.end   = IRQ_RTC_TIC,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+struct platform_device s3c_device_rtc = {
+	.name		  = "s3c64xx-rtc",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_rtc_resource),
+	.resource	  = s3c_rtc_resource,
+};
+EXPORT_SYMBOL(s3c_device_rtc);
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
new file mode 100644
index 0000000..29c32d0
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s3c64xx/dev-spi.c
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/gpio-bank-c.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irqs.h>
+
+static char *spi_src_clks[] = {
+	[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",
+	[S3C64XX_SPI_SRCCLK_SPIBUS] = "spi-bus",
+	[S3C64XX_SPI_SRCCLK_48M] = "spi_48m",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the GPC-3,7.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0);
+		s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO);
+		s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO);
+		s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1);
+		s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1);
+		s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1);
+		s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s3c64xx_spi0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_SPI0,
+		.end   = S3C64XX_PA_SPI0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI0_TX,
+		.end   = DMACH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI0_RX,
+		.end   = DMACH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
+	.cfg_gpio = s3c64xx_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_spi0 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_spi0_resource),
+	.resource	  = s3c64xx_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s3c64xx_spi0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_spi0);
+
+static struct resource s3c64xx_spi1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_SPI1,
+		.end   = S3C64XX_PA_SPI1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI1_TX,
+		.end   = DMACH_SPI1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI1_RX,
+		.end   = DMACH_SPI1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
+	.cfg_gpio = s3c64xx_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+};
+
+struct platform_device s3c64xx_device_spi1 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_spi1_resource),
+	.resource	  = s3c64xx_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s3c64xx_spi1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_spi1);
+
+void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info *pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S3C64XX_SPI_SRCCLK_48M) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		pd = &s3c64xx_spi0_pdata;
+		break;
+	case 1:
+		pd = &s3c64xx_spi1_pdata;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
similarity index 85%
rename from arch/arm/plat-s3c64xx/dev-uart.c
rename to arch/arm/mach-s3c64xx/dev-uart.c
index 62c11a6..f797f74 100644
--- a/arch/arm/plat-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -145,32 +145,3 @@
 		.nr_resources	= ARRAY_SIZE(s3c64xx_uart3_resource),
 	},
 };
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
similarity index 99%
rename from arch/arm/plat-s3c64xx/dma.c
rename to arch/arm/mach-s3c64xx/dma.c
index d554b93..b62bdf1 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -27,8 +27,7 @@
 #include <mach/map.h>
 #include <mach/irqs.h>
 
-#include <plat/dma-plat.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-sys.h>
 
 #include <asm/hardware/pl080.h>
 
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
new file mode 100644
index 0000000..66e6794
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/gpiolib.c
@@ -0,0 +1,288 @@
+/* arch/arm/plat-s3c64xx/gpiolib.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIOlib support 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/gpio.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <mach/regs-gpio.h>
+
+/* GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	8	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	5	4Bit	Yes	3
+ * E	5	4Bit	Yes	None
+ * F	16	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	16	4Bit[2]	No	None
+ * L	15	4Bit[2] No	None
+ * M	6	4Bit	No	IRQ_EINT
+ * N	16	2Bit	No	IRQ_EINT
+ * O	16	2Bit	Yes	7
+ * P	15	2Bit	Yes	8
+ * Q	9	2Bit	Yes	9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
+	.cfg_eint	= 7,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
+	.cfg_eint	= 3,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
+{
+	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
+static struct s3c_gpio_chip gpio_4bit[] = {
+	{
+		.base	= S3C64XX_GPA_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPA(0),
+			.ngpio	= S3C64XX_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.base	= S3C64XX_GPB_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPB(0),
+			.ngpio	= S3C64XX_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S3C64XX_GPC_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPC(0),
+			.ngpio	= S3C64XX_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S3C64XX_GPD_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPD(0),
+			.ngpio	= S3C64XX_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S3C64XX_GPE_BASE,
+		.config	= &gpio_4bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPE(0),
+			.ngpio	= S3C64XX_GPIO_E_NR,
+			.label	= "GPE",
+		},
+	}, {
+		.base	= S3C64XX_GPG_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPG(0),
+			.ngpio	= S3C64XX_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S3C64XX_GPM_BASE,
+		.config	= &gpio_4bit_cfg_eint0011,
+		.chip	= {
+			.base	= S3C64XX_GPM(0),
+			.ngpio	= S3C64XX_GPIO_M_NR,
+			.label	= "GPM",
+			.to_irq = s3c64xx_gpio2int_gpm,
+		},
+	},
+};
+
+int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
+{
+	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+
+static struct s3c_gpio_chip gpio_4bit2[] = {
+	{
+		.base	= S3C64XX_GPH_BASE + 0x4,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPH(0),
+			.ngpio	= S3C64XX_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	}, {
+		.base	= S3C64XX_GPK_BASE + 0x4,
+		.config	= &gpio_4bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPK(0),
+			.ngpio	= S3C64XX_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	}, {
+		.base	= S3C64XX_GPL_BASE + 0x4,
+		.config	= &gpio_4bit_cfg_eint0011,
+		.chip	= {
+			.base	= S3C64XX_GPL(0),
+			.ngpio	= S3C64XX_GPIO_L_NR,
+			.label	= "GPL",
+			.to_irq = s3c64xx_gpio2int_gpl,
+		},
+	},
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
+	.cfg_eint	= 2,
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
+	.cfg_eint	= 3,
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
+{
+	return IRQ_EINT(0) + pin;
+}
+
+static struct s3c_gpio_chip gpio_2bit[] = {
+	{
+		.base	= S3C64XX_GPF_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPF(0),
+			.ngpio	= S3C64XX_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S3C64XX_GPI_BASE,
+		.config	= &gpio_2bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPI(0),
+			.ngpio	= S3C64XX_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S3C64XX_GPJ_BASE,
+		.config	= &gpio_2bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPJ(0),
+			.ngpio	= S3C64XX_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S3C64XX_GPN_BASE,
+		.config	= &gpio_2bit_cfg_eint10,
+		.chip	= {
+			.base	= S3C64XX_GPN(0),
+			.ngpio	= S3C64XX_GPIO_N_NR,
+			.label	= "GPN",
+			.to_irq = s3c64xx_gpio2int_gpn,
+		},
+	}, {
+		.base	= S3C64XX_GPO_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPO(0),
+			.ngpio	= S3C64XX_GPIO_O_NR,
+			.label	= "GPO",
+		},
+	}, {
+		.base	= S3C64XX_GPP_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPP(0),
+			.ngpio	= S3C64XX_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.base	= S3C64XX_GPQ_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPQ(0),
+			.ngpio	= S3C64XX_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	},
+};
+
+static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
+{
+	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
+}
+
+static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
+				       int nr_chips,
+				       void (*fn)(struct s3c_gpio_chip *))
+{
+	for (; nr_chips > 0; nr_chips--, chips++) {
+		if (fn)
+			(fn)(chips);
+		s3c_gpiolib_add(chips);
+	}
+}
+
+static __init int s3c64xx_gpiolib_init(void)
+{
+	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
+			    samsung_gpiolib_add_4bit);
+
+	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
+			    samsung_gpiolib_add_4bit2);
+
+	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
+			    s3c64xx_gpiolib_add_2bit);
+
+	return 0;
+}
+
+core_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
similarity index 97%
rename from arch/arm/mach-s3c6400/include/mach/debug-macro.S
rename to arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index 5c88875..b18ac526 100644
--- a/arch/arm/mach-s3c6400/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, tmp
+	.macro addruart, rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C_PA_UART
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
new file mode 100644
index 0000000..0a5d926
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -0,0 +1,127 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#define S3C_DMA_CHANNELS	(16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+	/* DMA0/SDMA0 */
+	DMACH_UART0 = 0,
+	DMACH_UART0_SRC2,
+	DMACH_UART1,
+	DMACH_UART1_SRC2,
+	DMACH_UART2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,
+	DMACH_UART3_SRC2,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_I2S0_OUT,
+	DMACH_I2S0_IN,
+	DMACH_SPI0_TX,
+	DMACH_SPI0_RX,
+	DMACH_HSI_I2SV40_TX,
+	DMACH_HSI_I2SV40_RX,
+
+	/* DMA1/SDMA1 */
+	DMACH_PCM1_TX = 16,
+	DMACH_PCM1_RX,
+	DMACH_I2S1_OUT,
+	DMACH_I2S1_IN,
+	DMACH_SPI1_TX,
+	DMACH_SPI1_RX,
+	DMACH_AC97_PCMOUT,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_MICIN,
+	DMACH_PWM,
+	DMACH_IRDA,
+	DMACH_EXTERNAL,
+	DMACH_RES1,
+	DMACH_RES2,
+	DMACH_SECURITY_RX,	/* SDMA1 only */
+	DMACH_SECURITY_TX,	/* SDMA1 only */
+	DMACH_MAX		/* the end */
+};
+
+static __inline__ bool s3c_dma_has_circular(void)
+{
+	return true;
+}
+
+#define S3C2410_DMAF_CIRCULAR		(1 << 0)
+
+#include <plat/dma.h>
+
+#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
+
+struct s3c64xx_dma_buff;
+
+/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
+ * @next: Pointer to next buffer in queue or ring.
+ * @pw: Client provided identifier
+ * @lli: Pointer to hardware descriptor this buffer is associated with.
+ * @lli_dma: Hardare address of the descriptor.
+ */
+struct s3c64xx_dma_buff {
+	struct s3c64xx_dma_buff *next;
+
+	void			*pw;
+	struct pl080s_lli	*lli;
+	dma_addr_t		 lli_dma;
+};
+
+struct s3c64xx_dmac;
+
+struct s3c2410_dma_chan {
+	unsigned char		 number;      /* number of this dma channel */
+	unsigned char		 in_use;      /* channel allocated */
+	unsigned char		 bit;	      /* bit for enable/disable/etc */
+	unsigned char		 hw_width;
+	unsigned char		 peripheral;
+
+	unsigned int		 flags;
+	enum s3c2410_dmasrc	 source;
+
+
+	dma_addr_t		dev_addr;
+
+	struct s3c2410_dma_client *client;
+	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
+
+	void __iomem		*regs;
+
+	/* cdriver callbacks */
+	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
+	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
+
+	/* buffer list and information */
+	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
+	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
+	struct s3c64xx_dma_buff	*end;		/* end of queue */
+
+	/* note, when channel is running in circular mode, curr is the
+	 * first buffer enqueued, end is the last and curr is where the
+	 * last buffer-done event is set-at. The buffers are not freed
+	 * and the last buffer hardware descriptor points back to the
+	 * first.
+	 */
+};
+
+#include <plat/dma-core.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..dd36260
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Low-level IRQ helper macros for the Samsung S3C64XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
index 9aa0e42..34212e1 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
index 3933adb..7232c03 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
index e22b49f..db189ab 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
index 6fe4a49..1a01cee 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
index 7fcf3d8..f057adb 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
similarity index 97%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
index f3faff9..62ab8f5 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
index 35bbd237..b94954a 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
similarity index 97%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
index 2ba1767..5d75aaa 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
index ce9ebe3..4ceaa60 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
index 21a9062..6f25cd0 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
index 569e761..d0aeda1 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
similarity index 97%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
index b09e129..21868fa 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
similarity index 97%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
index 92f0051..46bcfb6 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
index 565e60a..1712223 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h
similarity index 95%
rename from arch/arm/mach-s3c6400/include/mach/gpio.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio.h
index e8e35e8..0d46e99 100644
--- a/arch/arm/mach-s3c6400/include/mach/gpio.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h
@@ -91,6 +91,10 @@
 #define S3C_GPIO_END		S3C64XX_GPIO_END
 
 /* define the number of gpios we need to the one after the GPQ() range */
-#define ARCH_NR_GPIOS	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#define BOARD_NR_GPIOS 16
+
+#define ARCH_NR_GPIOS	(GPIO_BOARD_START + BOARD_NR_GPIOS)
 
 #include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c6400/include/mach/hardware.h b/arch/arm/mach-s3c64xx/include/mach/hardware.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/hardware.h
rename to arch/arm/mach-s3c64xx/include/mach/hardware.h
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s3c64xx/include/mach/io.h
similarity index 72%
copy from arch/arm/plat-s3c/include/mach/io.h
copy to arch/arm/mach-s3c64xx/include/mach/io.h
index f6a5363..de5716db 100644
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ b/arch/arm/mach-s3c64xx/include/mach/io.h
@@ -1,9 +1,9 @@
-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s3c64xxinclude/mach/io.h
  *
  * Copyright 2008 Simtec Electronics
  *	Ben Dooks <ben-linux@fluff.org>
  *
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S3C64XX based
  */
 
 #ifndef __ASM_ARM_ARCH_IO_H
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
similarity index 93%
rename from arch/arm/plat-s3c64xx/include/plat/irqs.h
rename to arch/arm/mach-s3c64xx/include/mach/irqs.h
index 7956fd3..e9ab4ac 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -1,15 +1,15 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *      http://armlinux.simtec.co.uk/
  *
- * S3C64XX - Common IRQ support
+ * S3C64XX - IRQ support
  */
 
-#ifndef __ASM_PLAT_S3C64XX_IRQS_H
-#define __ASM_PLAT_S3C64XX_IRQS_H __FILE__
+#ifndef __ASM_MACH_S3C64XX_IRQS_H
+#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
 
 /* we keep the first set of CPU IRQs out of the range of
  * the ISA space, so that the PC104 has them to itself
@@ -24,8 +24,8 @@
 
 #define S3C_IRQ(x)	((x) + S3C_IRQ_OFFSET)
 
-#define S3C_VIC0_BASE	S3C_IRQ(0)
-#define S3C_VIC1_BASE	S3C_IRQ(32)
+#define IRQ_VIC0_BASE	S3C_IRQ(0)
+#define IRQ_VIC1_BASE	S3C_IRQ(32)
 
 /* UART interrupts, each UART has 4 intterupts per channel so
  * use the space between the ISA and S3C main interrupts. Note, these
@@ -59,8 +59,8 @@
 
 /* VIC based IRQs */
 
-#define S3C64XX_IRQ_VIC0(x)	(S3C_VIC0_BASE + (x))
-#define S3C64XX_IRQ_VIC1(x)	(S3C_VIC1_BASE + (x))
+#define S3C64XX_IRQ_VIC0(x)	(IRQ_VIC0_BASE + (x))
+#define S3C64XX_IRQ_VIC1(x)	(IRQ_VIC1_BASE + (x))
 
 /* VIC0 */
 
@@ -198,7 +198,13 @@
  * interrupt controllers). */
 #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
 
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#define IRQ_BOARD_NR 64
+#elif defined(CONFIG_SMDK6410_WM1192_EV1)
+#define IRQ_BOARD_NR 64
+#else
 #define IRQ_BOARD_NR 16
+#endif
 
 #define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
 
@@ -206,5 +212,5 @@
 
 #define NR_IRQS	(IRQ_BOARD_END + 1)
 
-#endif /* __ASM_PLAT_S3C64XX_IRQS_H */
+#endif /* __ASM_MACH_S3C64XX_IRQS_H */
 
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
similarity index 81%
rename from arch/arm/mach-s3c6400/include/mach/map.h
rename to arch/arm/mach-s3c64xx/include/mach/map.h
index 106ee13..801c1c0 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -17,6 +17,18 @@
 
 #include <plat/map-base.h>
 
+/*
+ * Post-mux Chip Select Regions Xm0CSn_
+ * These may be used by SROM, NAND or CF depending on settings
+ */
+
+#define S3C64XX_PA_XM0CSN0 (0x10000000)
+#define S3C64XX_PA_XM0CSN1 (0x18000000)
+#define S3C64XX_PA_XM0CSN2 (0x20000000)
+#define S3C64XX_PA_XM0CSN3 (0x28000000)
+#define S3C64XX_PA_XM0CSN4 (0x30000000)
+#define S3C64XX_PA_XM0CSN5 (0x38000000)
+
 /* HSMMC units */
 #define S3C64XX_PA_HSMMC(x)	(0x7C200000 + ((x) * 0x100000))
 #define S3C64XX_PA_HSMMC0	S3C64XX_PA_HSMMC(0)
@@ -38,16 +50,22 @@
 #define S3C_VA_UART2		S3C_VA_UARTx(2)
 #define S3C_VA_UART3		S3C_VA_UARTx(3)
 
+#define S3C64XX_PA_SROM		(0x70000000)
+
 #define S3C64XX_PA_NAND		(0x70200000)
 #define S3C64XX_PA_FB		(0x77100000)
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
+#define S3C64XX_PA_RTC		(0x7E005000)
+#define S3C64XX_PA_ADC		(0x7E00B000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
 #define S3C64XX_PA_AC97		(0x7F001000)
 #define S3C64XX_PA_IIS0		(0x7F002000)
 #define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_SPI0		(0x7F00B000)
+#define S3C64XX_PA_SPI1		(0x7F00C000)
 #define S3C64XX_PA_PCM0		(0x7F009000)
 #define S3C64XX_PA_PCM1		(0x7F00A000)
 #define S3C64XX_PA_IISV4	(0x7F00D000)
@@ -70,8 +88,8 @@
 #define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
 
 /* place VICs close together */
-#define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
-#define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
+#define VA_VIC0			(S3C_VA_IRQ + 0x00)
+#define VA_VIC1			(S3C_VA_IRQ + 0x10000)
 
 /* compatibiltiy defines. */
 #define S3C_PA_TIMER		S3C64XX_PA_TIMER
diff --git a/arch/arm/mach-s3c6400/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/memory.h
rename to arch/arm/mach-s3c64xx/include/mach/memory.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/pll.h
rename to arch/arm/mach-s3c64xx/include/mach/pll.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/pm-core.h
rename to arch/arm/mach-s3c64xx/include/mach/pm-core.h
index d347de3..1e9f20f 100644
--- a/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
@@ -12,7 +12,7 @@
  * published by the Free Software Foundation.
  */
 
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 static inline void s3c_pm_debug_init_uart(void)
 {
diff --git a/arch/arm/mach-s3c6400/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/pwm-clock.h
rename to arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
similarity index 66%
rename from arch/arm/plat-s3c64xx/include/plat/regs-clock.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index ff46e7f..3ef6274 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -35,14 +35,6 @@
 #define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
 
 /* CLKDIV0 */
-#define S3C6400_CLKDIV0_MFC_MASK	(0xf << 28)
-#define S3C6400_CLKDIV0_MFC_SHIFT	(28)
-#define S3C6400_CLKDIV0_JPEG_MASK	(0xf << 24)
-#define S3C6400_CLKDIV0_JPEG_SHIFT	(24)
-#define S3C6400_CLKDIV0_CAM_MASK	(0xf << 20)
-#define S3C6400_CLKDIV0_CAM_SHIFT	(20)
-#define S3C6400_CLKDIV0_SECURITY_MASK	(0x3 << 18)
-#define S3C6400_CLKDIV0_SECURITY_SHIFT	(18)
 #define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
 #define S3C6400_CLKDIV0_PCLK_SHIFT	(12)
 #define S3C6400_CLKDIV0_HCLK2_MASK	(0x7 << 9)
@@ -51,42 +43,11 @@
 #define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
 #define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
 #define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
+
 #define S3C6400_CLKDIV0_ARM_MASK	(0x7 << 0)
 #define S3C6410_CLKDIV0_ARM_MASK	(0xf << 0)
 #define S3C6400_CLKDIV0_ARM_SHIFT	(0)
 
-/* CLKDIV1 */
-#define S3C6410_CLKDIV1_FIMC_MASK	(0xf << 24)
-#define S3C6410_CLKDIV1_FIMC_SHIFT	(24)
-#define S3C6400_CLKDIV1_UHOST_MASK	(0xf << 20)
-#define S3C6400_CLKDIV1_UHOST_SHIFT	(20)
-#define S3C6400_CLKDIV1_SCALER_MASK	(0xf << 16)
-#define S3C6400_CLKDIV1_SCALER_SHIFT	(16)
-#define S3C6400_CLKDIV1_LCD_MASK	(0xf << 12)
-#define S3C6400_CLKDIV1_LCD_SHIFT	(12)
-#define S3C6400_CLKDIV1_MMC2_MASK	(0xf << 8)
-#define S3C6400_CLKDIV1_MMC2_SHIFT	(8)
-#define S3C6400_CLKDIV1_MMC1_MASK	(0xf << 4)
-#define S3C6400_CLKDIV1_MMC1_SHIFT	(4)
-#define S3C6400_CLKDIV1_MMC0_MASK	(0xf << 0)
-#define S3C6400_CLKDIV1_MMC0_SHIFT	(0)
-
-/* CLKDIV2 */
-#define S3C6410_CLKDIV2_AUDIO2_MASK	(0xf << 24)
-#define S3C6410_CLKDIV2_AUDIO2_SHIFT	(24)
-#define S3C6400_CLKDIV2_IRDA_MASK	(0xf << 20)
-#define S3C6400_CLKDIV2_IRDA_SHIFT	(20)
-#define S3C6400_CLKDIV2_UART_MASK	(0xf << 16)
-#define S3C6400_CLKDIV2_UART_SHIFT	(16)
-#define S3C6400_CLKDIV2_AUDIO1_MASK	(0xf << 12)
-#define S3C6400_CLKDIV2_AUDIO1_SHIFT	(12)
-#define S3C6400_CLKDIV2_AUDIO0_MASK	(0xf << 8)
-#define S3C6400_CLKDIV2_AUDIO0_SHIFT	(8)
-#define S3C6400_CLKDIV2_SPI1_MASK	(0xf << 4)
-#define S3C6400_CLKDIV2_SPI1_SHIFT	(4)
-#define S3C6400_CLKDIV2_SPI0_MASK	(0xf << 0)
-#define S3C6400_CLKDIV2_SPI0_SHIFT	(0)
-
 /* HCLK GATE Registers */
 #define S3C_CLKCON_HCLK_3DSE	(1<<31)
 #define S3C_CLKCON_HCLK_UHOST	(1<<29)
@@ -192,34 +153,4 @@
 #define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
 #define S3C6400_CLKSRC_MFC		(1 << 4)
 
-#define S3C6410_CLKSRC_TV27_MASK	(0x1 << 31)
-#define S3C6410_CLKSRC_TV27_SHIFT	(31)
-#define S3C6410_CLKSRC_DAC27_MASK	(0x1 << 30)
-#define S3C6410_CLKSRC_DAC27_SHIFT	(30)
-#define S3C6400_CLKSRC_SCALER_MASK	(0x3 << 28)
-#define S3C6400_CLKSRC_SCALER_SHIFT	(28)
-#define S3C6400_CLKSRC_LCD_MASK		(0x3 << 26)
-#define S3C6400_CLKSRC_LCD_SHIFT	(26)
-#define S3C6400_CLKSRC_IRDA_MASK	(0x3 << 24)
-#define S3C6400_CLKSRC_IRDA_SHIFT	(24)
-#define S3C6400_CLKSRC_MMC2_MASK	(0x3 << 22)
-#define S3C6400_CLKSRC_MMC2_SHIFT	(22)
-#define S3C6400_CLKSRC_MMC1_MASK	(0x3 << 20)
-#define S3C6400_CLKSRC_MMC1_SHIFT	(20)
-#define S3C6400_CLKSRC_MMC0_MASK	(0x3 << 18)
-#define S3C6400_CLKSRC_MMC0_SHIFT	(18)
-#define S3C6400_CLKSRC_SPI1_MASK	(0x3 << 16)
-#define S3C6400_CLKSRC_SPI1_SHIFT	(16)
-#define S3C6400_CLKSRC_SPI0_MASK	(0x3 << 14)
-#define S3C6400_CLKSRC_SPI0_SHIFT	(14)
-#define S3C6400_CLKSRC_UART_MASK	(0x1 << 13)
-#define S3C6400_CLKSRC_UART_SHIFT	(13)
-#define S3C6400_CLKSRC_AUDIO1_MASK	(0x7 << 10)
-#define S3C6400_CLKSRC_AUDIO1_SHIFT	(10)
-#define S3C6400_CLKSRC_AUDIO0_MASK	(0x7 << 7)
-#define S3C6400_CLKSRC_AUDIO0_SHIFT	(7)
-#define S3C6400_CLKSRC_UHOST_MASK	(0x3 << 5)
-#define S3C6400_CLKSRC_UHOST_SHIFT	(5)
-
-
 #endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/regs-fb.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-fb.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/regs-irq.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-irq.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h b/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-modem.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-modem.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
new file mode 100644
index 0000000..756731b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
@@ -0,0 +1,59 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h
+ *
+ * Copyright 2009 Andy Green <andy@warmcat.com>
+ *
+ * S3C64XX SROM definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_SROM_H
+#define __PLAT_REGS_SROM_H __FILE__
+
+#define S3C64XX_SROMREG(x)	(S3C_VA_MEM + (x))
+
+#define S3C64XX_SROM_BW		S3C64XX_SROMREG(0)
+#define S3C64XX_SROM_BC0	S3C64XX_SROMREG(4)
+#define S3C64XX_SROM_BC1	S3C64XX_SROMREG(8)
+#define S3C64XX_SROM_BC2	S3C64XX_SROMREG(0xc)
+#define S3C64XX_SROM_BC3	S3C64XX_SROMREG(0x10)
+#define S3C64XX_SROM_BC4	S3C64XX_SROMREG(0x14)
+#define S3C64XX_SROM_BC5	S3C64XX_SROMREG(0x18)
+
+/*
+ * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4
+ */
+
+#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT	0
+#define S3C64XX_SROM_BW__WAITENABLE__SHIFT	2
+#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT	3
+#define S3C64XX_SROM_BW__CS_MASK 0xf
+
+#define S3C64XX_SROM_BW__NCS0__SHIFT	0
+#define S3C64XX_SROM_BW__NCS1__SHIFT	4
+#define S3C64XX_SROM_BW__NCS2__SHIFT	8
+#define S3C64XX_SROM_BW__NCS3__SHIFT	0xc
+#define S3C64XX_SROM_BW__NCS4__SHIFT	0x10
+
+/*
+ * applies to same to BCS0 - BCS4
+ */
+
+#define S3C64XX_SROM_BCX__PMC__SHIFT	0
+#define S3C64XX_SROM_BCX__PMC__MASK	3
+#define S3C64XX_SROM_BCX__TACP__SHIFT	4
+#define S3C64XX_SROM_BCX__TACP__MASK	0xf
+#define S3C64XX_SROM_BCX__TCAH__SHIFT	8
+#define S3C64XX_SROM_BCX__TCAH__MASK	0xf
+#define S3C64XX_SROM_BCX__TCOH__SHIFT	12
+#define S3C64XX_SROM_BCX__TCOH__MASK	0xf
+#define S3C64XX_SROM_BCX__TACC__SHIFT	16
+#define S3C64XX_SROM_BCX__TACC__MASK	0x1f
+#define S3C64XX_SROM_BCX__TCOS__SHIFT	24
+#define S3C64XX_SROM_BCX__TCOS__MASK	0xf
+#define S3C64XX_SROM_BCX__TACS__SHIFT	28
+#define S3C64XX_SROM_BCX__TACS__MASK	0xf
+
+#endif /* _PLAT_REGS_SROM_H */
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-sys.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-sys.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h b/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
similarity index 87%
rename from arch/arm/plat-s3c64xx/include/plat/s3c6400.h
rename to arch/arm/mach-s3c64xx/include/mach/s3c6400.h
index 11f2e1e..f86958d 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+++ b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
@@ -15,9 +15,10 @@
 /* Common init code for S3C6400 related SoCs */
 
 extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_register_clocks(unsigned armclk_divlimit);
 extern void s3c6400_setup_clocks(void);
 
+extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
+
 #ifdef CONFIG_CPU_S3C6400
 
 extern  int s3c6400_init(void);
@@ -33,4 +34,3 @@
 #define s3c6400_map_io NULL
 #define s3c6400_init NULL
 #endif
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
similarity index 93%
rename from arch/arm/plat-s3c64xx/include/plat/s3c6410.h
rename to arch/arm/mach-s3c64xx/include/mach/s3c6410.h
index 50dcdd6..24f1141 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+++ b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h
  *
  * Copyright 2008 Openmoko,  Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
new file mode 100644
index 0000000..9d0c43b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C64XX_PLAT_SPI_CLKS_H
+#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__
+
+#define S3C64XX_SPI_SRCCLK_PCLK		0
+#define S3C64XX_SPI_SRCCLK_SPIBUS	1
+#define S3C64XX_SPI_SRCCLK_48M		2
+
+#endif /* __S3C64XX_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/system.h
rename to arch/arm/mach-s3c64xx/include/mach/system.h
diff --git a/arch/arm/mach-s3c6400/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h
similarity index 93%
rename from arch/arm/mach-s3c6400/include/mach/tick.h
rename to arch/arm/mach-s3c64xx/include/mach/tick.h
index d9c0dc7..ebe18a9 100644
--- a/arch/arm/mach-s3c6400/include/mach/tick.h
+++ b/arch/arm/mach-s3c64xx/include/mach/tick.h
@@ -20,7 +20,7 @@
  */
 static inline u32 s3c24xx_ostimer_pending(void)
 {
-	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
 	return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
 }
 
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h
similarity index 89%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s3c64xx/include/mach/timex.h
index 2a425ed..fb2e8cd 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s3c64xx/include/mach/timex.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* arch/arm/mach-s3c64xx/include/mach/timex.h
  *
  * Copyright (c) 2003-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - time parameters
+ * S3C6400 - time parameters
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,8 +19,6 @@
  * for the time conversion functions to/from jiffies is acceptable.
 */
 
-
 #define CLOCK_TICK_RATE 12000000
 
-
 #endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/uncompress.h b/arch/arm/mach-s3c64xx/include/mach/uncompress.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/uncompress.h
rename to arch/arm/mach-s3c64xx/include/mach/uncompress.h
diff --git a/arch/arm/plat-s3c/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
similarity index 80%
copy from arch/arm/plat-s3c/include/mach/vmalloc.h
copy to arch/arm/mach-s3c64xx/include/mach/vmalloc.h
index 299d95f..7411ef3 100644
--- a/arch/arm/plat-s3c/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/mach/vmalloc.h
+/* arch/arm/mach-s3c64xx/include/mach/vmalloc.h
  *
  * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
  *
@@ -9,12 +9,12 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * S3C2410 vmalloc definition
+ * S3C6400 vmalloc definition
 */
 
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xe0000000UL)
+#define VMALLOC_END	  (0xE0000000)
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c
similarity index 99%
rename from arch/arm/plat-s3c64xx/irq-eint.c
rename to arch/arm/mach-s3c64xx/irq-eint.c
index ebdf183..5682d6a 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/mach-s3c64xx/irq-eint.c
@@ -22,7 +22,7 @@
 #include <asm/hardware/vic.h>
 
 #include <plat/regs-irqtype.h>
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <plat/gpio-cfg.h>
 
 #include <mach/map.h>
diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
similarity index 98%
rename from arch/arm/plat-s3c64xx/irq-pm.c
rename to arch/arm/mach-s3c64xx/irq-pm.c
index ca523b5..da1bec6 100644
--- a/arch/arm/plat-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -23,7 +23,7 @@
 
 #include <plat/regs-serial.h>
 #include <plat/regs-timer.h>
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
 
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
new file mode 100644
index 0000000..67a145d
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/irq.c
@@ -0,0 +1,69 @@
+/* arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
+#include <plat/cpu.h>
+
+static struct s3c_uart_irq uart_irqs[] = {
+	[0] = {
+		.regs		= S3C_VA_UART0,
+		.base_irq	= IRQ_S3CUART_BASE0,
+		.parent_irq	= IRQ_UART0,
+	},
+	[1] = {
+		.regs		= S3C_VA_UART1,
+		.base_irq	= IRQ_S3CUART_BASE1,
+		.parent_irq	= IRQ_UART1,
+	},
+	[2] = {
+		.regs		= S3C_VA_UART2,
+		.base_irq	= IRQ_S3CUART_BASE2,
+		.parent_irq	= IRQ_UART2,
+	},
+	[3] = {
+		.regs		= S3C_VA_UART3,
+		.base_irq	= IRQ_S3CUART_BASE3,
+		.parent_irq	= IRQ_UART3,
+	},
+};
+
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0);
+	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0);
+
+	/* add the timer sub-irqs */
+
+	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+	s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+	s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+	s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
+
+	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
+}
diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
similarity index 97%
rename from arch/arm/mach-s3c6410/mach-anw6410.c
rename to arch/arm/mach-s3c64xx/mach-anw6410.c
index 661cca6..4a0bb24 100644
--- a/arch/arm/mach-s3c6410/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
+/* linux/arch/arm/mach-s3c64xx/mach-anw6410.c
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
@@ -45,12 +45,12 @@
 #include <plat/iic.h>
 #include <plat/fb.h>
 
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-modem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
 
 /* DM9000 */
 #define ANW6410_PA_DM9000	(0x18000000)
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
similarity index 99%
rename from arch/arm/mach-s3c6410/mach-hmt.c
rename to arch/arm/mach-s3c64xx/mach-hmt.c
index 7619456..187441a 100644
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -38,7 +38,7 @@
 #include <plat/fb.h>
 #include <plat/nand.h>
 
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -233,7 +233,7 @@
 	&s3c_device_i2c0,
 	&s3c_device_nand,
 	&s3c_device_fb,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_timer[1],
 	&hmt_backlight_device,
 	&hmt_leds_device,
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
similarity index 96%
rename from arch/arm/mach-s3c6410/mach-ncp.c
rename to arch/arm/mach-s3c64xx/mach-ncp.c
index 55e9bbf..bf65747 100644
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-s3c6410/mach-ncp.c
+ * linux/arch/arm/mach-s3c64xx/mach-ncp.c
  *
  * Copyright (C) 2008-2009 Samsung Electronics
  *
@@ -40,7 +40,7 @@
 #include <plat/iic.h>
 #include <plat/fb.h>
 
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
similarity index 96%
rename from arch/arm/mach-s3c6400/mach-smdk6400.c
rename to arch/arm/mach-s3c64xx/mach-smdk6400.c
index ab19285..f7b1898 100644
--- a/arch/arm/mach-s3c6400/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6400.c
  *
  * Copyright 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -31,7 +31,7 @@
 
 #include <plat/regs-serial.h>
 
-#include <plat/s3c6400.h>
+#include <mach/s3c6400.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
similarity index 62%
rename from arch/arm/mach-s3c6410/mach-smdk6410.c
rename to arch/arm/mach-s3c64xx/mach-smdk6410.c
index 8969fe7..2d5afd2 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6410.c
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
+#include <linux/leds.h>
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
@@ -32,6 +33,11 @@
 #include <linux/mfd/wm8350/pmic.h>
 #endif
 
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#endif
+
 #include <video/platform_lcd.h>
 
 #include <asm/mach/arch.h>
@@ -46,14 +52,15 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/regs-modem.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-modem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-srom.h>
 #include <plat/iic.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -154,10 +161,20 @@
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 };
 
+/*
+ * Configuring Ethernet on SMDK6410
+ *
+ * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
+ * The constant address below corresponds to nCS1
+ *
+ *  1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
+ *  2) CFG6 needs to be switched to "LAN9115" side
+ */
+
 static struct resource smdk6410_smsc911x_resources[] = {
 	[0] = {
-		.start = 0x18000000,
-		.end   = 0x18000000 + SZ_64K - 1,
+		.start = S3C64XX_PA_XM0CSN1,
+		.end   = S3C64XX_PA_XM0CSN1 + SZ_64K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -235,8 +252,9 @@
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_fb,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_usb_hsotg,
+	&s3c64xx_device_iisv4,
 
 #ifdef CONFIG_REGULATOR
 	&smdk6410_b_pwr_5v,
@@ -246,6 +264,119 @@
 	&smdk6410_smsc911x,
 };
 
+#ifdef CONFIG_REGULATOR
+/* ARM core */
+static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
+	{
+		.supply = "vddarm",
+	}
+};
+
+/* VDDARM, BUCK1 on J5 */
+static struct regulator_init_data smdk6410_vddarm = {
+	.constraints = {
+		.name = "PVDD_ARM",
+		.min_uV = 1000000,
+		.max_uV = 1300000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
+	.consumer_supplies = smdk6410_vddarm_consumers,
+};
+
+/* VDD_INT, BUCK2 on J5 */
+static struct regulator_init_data smdk6410_vddint = {
+	.constraints = {
+		.name = "PVDD_INT",
+		.min_uV = 1000000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+};
+
+/* VDD_HI, LDO3 on J5 */
+static struct regulator_init_data smdk6410_vddhi = {
+	.constraints = {
+		.name = "PVDD_HI",
+		.always_on = 1,
+	},
+};
+
+/* VDD_PLL, LDO2 on J5 */
+static struct regulator_init_data smdk6410_vddpll = {
+	.constraints = {
+		.name = "PVDD_PLL",
+		.always_on = 1,
+	},
+};
+
+/* VDD_UH_MMC, LDO5 on J5 */
+static struct regulator_init_data smdk6410_vdduh_mmc = {
+	.constraints = {
+		.name = "PVDD_UH/PVDD_MMC",
+		.always_on = 1,
+	},
+};
+
+/* VCCM3BT, LDO8 on J5 */
+static struct regulator_init_data smdk6410_vccmc3bt = {
+	.constraints = {
+		.name = "PVCCM3BT",
+		.always_on = 1,
+	},
+};
+
+/* VCCM2MTV, LDO11 on J5 */
+static struct regulator_init_data smdk6410_vccm2mtv = {
+	.constraints = {
+		.name = "PVCCM2MTV",
+		.always_on = 1,
+	},
+};
+
+/* VDD_LCD, LDO12 on J5 */
+static struct regulator_init_data smdk6410_vddlcd = {
+	.constraints = {
+		.name = "PVDD_LCD",
+		.always_on = 1,
+	},
+};
+
+/* VDD_OTGI, LDO9 on J5 */
+static struct regulator_init_data smdk6410_vddotgi = {
+	.constraints = {
+		.name = "PVDD_OTGI",
+		.always_on = 1,
+	},
+};
+
+/* VDD_OTG, LDO14 on J5 */
+static struct regulator_init_data smdk6410_vddotg = {
+	.constraints = {
+		.name = "PVDD_OTG",
+		.always_on = 1,
+	},
+};
+
+/* VDD_ALIVE, LDO15 on J5 */
+static struct regulator_init_data smdk6410_vddalive = {
+	.constraints = {
+		.name = "PVDD_ALIVE",
+		.always_on = 1,
+	},
+};
+
+/* VDD_AUDIO, VLDO_AUDIO on J5 */
+static struct regulator_init_data smdk6410_vddaudio = {
+	.constraints = {
+		.name = "PVDD_AUDIO",
+		.always_on = 1,
+	},
+};
+#endif
+
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 /* S3C64xx internal logic & PLL */
 static struct regulator_init_data wm8350_dcdc1_data = {
@@ -269,7 +400,7 @@
 			 .uV = 1800000,
 			 .mode = REGULATOR_MODE_NORMAL,
 			 .enabled = 1,
-		 },
+		},
 		.initial_state = PM_SUSPEND_MEM,
 	},
 };
@@ -294,56 +425,6 @@
 	.consumer_supplies = wm8350_dcdc4_consumers,
 };
 
-/* ARM core */
-static struct regulator_consumer_supply dcdc6_consumers[] = {
-	{
-		.supply = "vddarm",
-	}
-};
-
-static struct regulator_init_data wm8350_dcdc6_data = {
-	.constraints = {
-		.name = "PVDD_ARM",
-		.min_uV = 1000000,
-		.max_uV = 1300000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
-	.consumer_supplies = dcdc6_consumers,
-};
-
-/* Alive */
-static struct regulator_init_data wm8350_ldo1_data = {
-	.constraints = {
-		.name = "PVDD_ALIVE",
-		.min_uV = 1200000,
-		.max_uV = 1200000,
-		.always_on = 1,
-		.apply_uV = 1,
-	},
-};
-
-/* OTG */
-static struct regulator_init_data wm8350_ldo2_data = {
-	.constraints = {
-		.name = "PVDD_OTG",
-		.min_uV = 3300000,
-		.max_uV = 3300000,
-		.always_on = 1,
-	},
-};
-
-/* LCD */
-static struct regulator_init_data wm8350_ldo3_data = {
-	.constraints = {
-		.name = "PVDD_LCD",
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.always_on = 1,
-	},
-};
-
 /* OTGi/1190-EV1 HPVDD & AVDD */
 static struct regulator_init_data wm8350_ldo4_data = {
 	.constraints = {
@@ -362,10 +443,10 @@
 	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
 	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
 	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
-	{ WM8350_DCDC_6, &wm8350_dcdc6_data },
-	{ WM8350_LDO_1, &wm8350_ldo1_data },
-	{ WM8350_LDO_2, &wm8350_ldo2_data },
-	{ WM8350_LDO_3, &wm8350_ldo3_data },
+	{ WM8350_DCDC_6, &smdk6410_vddarm },
+	{ WM8350_LDO_1, &smdk6410_vddalive },
+	{ WM8350_LDO_2, &smdk6410_vddotg },
+	{ WM8350_LDO_3, &smdk6410_vddlcd },
 	{ WM8350_LDO_4, &wm8350_ldo4_data },
 };
 
@@ -388,6 +469,107 @@
 static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
 	.init = smdk6410_wm8350_init,
 	.irq_high = 1,
+	.irq_base = IRQ_BOARD_START,
+};
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+static struct gpio_led wm1192_pmic_leds[] = {
+	{
+		.name = "PMIC:red:power",
+		.gpio = GPIO_BOARD_START + 3,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+};
+
+static struct gpio_led_platform_data wm1192_pmic_led = {
+	.num_leds = ARRAY_SIZE(wm1192_pmic_leds),
+	.leds = wm1192_pmic_leds,
+};
+
+static struct platform_device wm1192_pmic_led_dev = {
+	.name          = "leds-gpio",
+	.id            = -1,
+	.dev = {
+		.platform_data = &wm1192_pmic_led,
+	},
+};
+
+static int wm1192_pre_init(struct wm831x *wm831x)
+{
+	int ret;
+
+	/* Configure the IRQ line */
+	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
+	ret = platform_device_register(&wm1192_pmic_led_dev);
+	if (ret != 0)
+		dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
+
+	return 0;
+}
+
+static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
+	.isink = 1,
+	.max_uA = 27554,
+};
+
+static struct regulator_init_data wm1192_dcdc3 = {
+	.constraints = {
+		.name = "PVDD_MEM/PVDD_GPS",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
+	{ .supply = "DVDD", .dev_name = "0-001b", },   /* WM8580 */
+};
+
+static struct regulator_init_data wm1192_ldo1 = {
+	.constraints = {
+		.name = "PVDD_LCD/PVDD_EXT",
+		.always_on = 1,
+	},
+	.consumer_supplies = wm1192_ldo1_consumers,
+	.num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
+};
+
+static struct wm831x_status_pdata wm1192_led7_pdata = {
+	.name = "LED7:green:",
+};
+
+static struct wm831x_status_pdata wm1192_led8_pdata = {
+	.name = "LED8:green:",
+};
+
+static struct wm831x_pdata smdk6410_wm1192_pdata = {
+	.pre_init = wm1192_pre_init,
+	.irq_base = IRQ_BOARD_START,
+
+	.backlight = &wm1192_backlight_pdata,
+	.dcdc = {
+		&smdk6410_vddarm,  /* DCDC1 */
+		&smdk6410_vddint,  /* DCDC2 */
+		&wm1192_dcdc3,
+	},
+	.gpio_base = GPIO_BOARD_START,
+	.ldo = {
+		 &wm1192_ldo1,        /* LDO1 */
+		 &smdk6410_vdduh_mmc, /* LDO2 */
+		 NULL,                /* LDO3 NC */
+		 &smdk6410_vddotgi,   /* LDO4 */
+		 &smdk6410_vddotg,    /* LDO5 */
+		 &smdk6410_vddhi,     /* LDO6 */
+		 &smdk6410_vddaudio,  /* LDO7 */
+		 &smdk6410_vccm2mtv,  /* LDO8 */
+		 &smdk6410_vddpll,    /* LDO9 */
+		 &smdk6410_vccmc3bt,  /* LDO10 */
+		 &smdk6410_vddalive,  /* LDO11 */
+	},
+	.status = {
+		&wm1192_led7_pdata,
+		&wm1192_led8_pdata,
+	},
 };
 #endif
 
@@ -395,6 +577,13 @@
 	{ I2C_BOARD_INFO("24c08", 0x50), },
 	{ I2C_BOARD_INFO("wm8580", 0x1b), },
 
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+	{ I2C_BOARD_INFO("wm8312", 0x34),
+	  .platform_data = &smdk6410_wm1192_pdata,
+	  .irq = S3C_EINT(12),
+	},
+#endif
+
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 	{ I2C_BOARD_INFO("wm8350", 0x1a),
 	  .platform_data = &smdk6410_wm8350_pdata,
@@ -430,10 +619,32 @@
 
 static void __init smdk6410_machine_init(void)
 {
+	u32 cs1;
+
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
 
+	/* configure nCS1 width to 16 bits */
+
+	cs1 = __raw_readl(S3C64XX_SROM_BW) &
+		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+						   S3C64XX_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S3C64XX_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+
+	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
 	gpio_request(S3C64XX_GPN(5), "LCD power");
 	gpio_request(S3C64XX_GPF(13), "LCD power");
 	gpio_request(S3C64XX_GPF(15), "LCD power");
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
similarity index 95%
rename from arch/arm/plat-s3c64xx/pm.c
rename to arch/arm/mach-s3c64xx/pm.c
index 47632fc..b8ac459 100644
--- a/arch/arm/plat-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -20,14 +20,14 @@
 #include <mach/map.h>
 
 #include <plat/pm.h>
-#include <plat/regs-sys.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-clock.h>
-#include <plat/regs-syscon-power.h>
-#include <plat/regs-gpio-memport.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-syscon-power.h>
+#include <mach/regs-gpio-memport.h>
 
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-#include <plat/gpio-bank-n.h>
+#include <mach/gpio-bank-n.h>
 
 void s3c_pm_debug_smdkled(u32 set, u32 clear)
 {
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
similarity index 86%
rename from arch/arm/mach-s3c6400/s3c6400.c
rename to arch/arm/mach-s3c64xx/s3c6400.c
index d876ee50..707e34e 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/cpu.c
+/* linux/arch/arm/mach-s3c64xx/cpu.c
  *
  * Copyright 2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -30,14 +30,14 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
-#include <plat/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
-#include <plat/s3c6400.h>
+#include <mach/s3c6400.h>
 
 void __init s3c6400_map_io(void)
 {
@@ -55,10 +55,7 @@
 
 void __init s3c6400_init_clocks(int xtal)
 {
-	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
-	s3c24xx_register_baseclocks(xtal);
-	s3c64xx_register_clocks();
-	s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
+	s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
 	s3c6400_setup_clocks();
 }
 
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c64xx/s3c6410.c
similarity index 80%
rename from arch/arm/mach-s3c6410/cpu.c
rename to arch/arm/mach-s3c64xx/s3c6410.c
index 522c086..59635d1 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/cpu.c
+/* linux/arch/arm/mach-s3c64xx/s3c6410.c
  *
  * Copyright 2008 Simtec Electronics
  * Copyright 2008 Simtec Electronics
@@ -31,30 +31,18 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
-#include <plat/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s3c6410_iodesc[] __initdata = {
-};
-
-/* s3c6410_map_io
- *
- * register the standard cpu IO areas
-*/
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
 
 void __init s3c6410_map_io(void)
 {
-	iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc));
-
 	/* initialise device information early */
 	s3c6410_default_sdhci0();
 	s3c6410_default_sdhci1();
@@ -70,9 +58,7 @@
 void __init s3c6410_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
-	s3c24xx_register_baseclocks(xtal);
-	s3c64xx_register_clocks();
-	s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
+	s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
 	s3c6400_setup_clocks();
 }
 
diff --git a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/setup-fb-24bpp.c
rename to arch/arm/mach-s3c64xx/setup-fb-24bpp.c
diff --git a/arch/arm/plat-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
similarity index 96%
rename from arch/arm/plat-s3c64xx/setup-i2c0.c
rename to arch/arm/mach-s3c64xx/setup-i2c0.c
index 3644807..d1b11e6 100644
--- a/arch/arm/plat-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -18,8 +18,8 @@
 struct platform_device; /* don't need the contents */
 
 #include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
 #include <plat/iic.h>
-#include <plat/gpio-bank-b.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/plat-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
similarity index 96%
rename from arch/arm/plat-s3c64xx/setup-i2c1.c
rename to arch/arm/mach-s3c64xx/setup-i2c1.c
index bbe229b..2dce57d 100644
--- a/arch/arm/plat-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -18,8 +18,8 @@
 struct platform_device; /* don't need the contents */
 
 #include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
 #include <plat/iic.h>
-#include <plat/gpio-bank-b.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
rename to arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
similarity index 78%
rename from arch/arm/mach-s3c6400/setup-sdhci.c
rename to arch/arm/mach-s3c64xx/setup-sdhci.c
index 1039937..1a94203 100644
--- a/arch/arm/mach-s3c6400/setup-sdhci.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
@@ -1,11 +1,11 @@
-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c
  *
  * Copyright 2008 Simtec Electronics
  * Copyright 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ * S3C6400/S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -26,7 +26,7 @@
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
-char *s3c6400_hsmmc_clksrcs[4] = {
+char *s3c64xx_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",
 	[1] = "hsmmc",
 	[2] = "mmc_bus",
@@ -61,3 +61,12 @@
 	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
 }
 
+void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
+				  void __iomem *r,
+				  struct mmc_ios *ios,
+				  struct mmc_card *card)
+{
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	s3c6400_setup_sdhci_cfg_card(dev, r, ios, card);
+}
diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
similarity index 97%
rename from arch/arm/plat-s3c64xx/sleep.S
rename to arch/arm/mach-s3c64xx/sleep.S
index 8e71fe9..b2ef443 100644
--- a/arch/arm/plat-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -1,4 +1,4 @@
-/* linux/0arch/arm/plat-s3c64xx/sleep.S
+/* linux/arch/arm/plat-s3c64xx/sleep.S
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
@@ -19,8 +19,8 @@
 #undef S3C64XX_VA_GPIO
 #define S3C64XX_VA_GPIO (0x0)
 
-#include <plat/regs-gpio.h>
-#include <plat/gpio-bank-n.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-bank-n.h>
 
 #define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
 
diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig
new file mode 100644
index 0000000..4c29ff8
--- /dev/null
+++ b/arch/arm/mach-s5p6440/Kconfig
@@ -0,0 +1,21 @@
+# arch/arm/mach-s5p6440/Kconfig
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+if ARCH_S5P6440
+
+config CPU_S5P6440
+	bool
+	help
+	  Enable S5P6440 CPU support
+
+config MACH_SMDK6440
+	bool "SMDK6440"
+	select CPU_S5P6440
+	help
+	  Machine support for the Samsung SMDK6440
+
+endif
diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile
new file mode 100644
index 0000000..1ad894b
--- /dev/null
+++ b/arch/arm/mach-s5p6440/Makefile
@@ -0,0 +1,19 @@
+# arch/arm/mach-s5p6440/Makefile
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5P6440 system
+
+obj-$(CONFIG_CPU_S5P6440)	+= cpu.o init.o clock.o gpio.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p6440/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5p6440/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5p6440/clock.c b/arch/arm/mach-s5p6440/clock.c
new file mode 100644
index 0000000..b2672e1
--- /dev/null
+++ b/arch/arm/mach-s5p6440/clock.c
@@ -0,0 +1,698 @@
+/* linux/arch/arm/mach-s5p6440/clock.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p-clock.h>
+#include <plat/pll.h>
+#include <plat/s5p6440.h>
+
+/* APLL Mux output clock */
+static struct clksrc_clk clk_mout_apll = {
+	.clk    = {
+		.name           = "mout_apll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_apll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static int s5p6440_epll_enable(struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+	if (enable)
+		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+	else
+		__raw_writel(epll_con, S5P_EPLL_CON);
+
+	return 0;
+}
+
+static unsigned long s5p6440_epll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static u32 epll_div[][5] = {
+	{ 36000000,	0,	48, 1, 4 },
+	{ 48000000,	0,	32, 1, 3 },
+	{ 60000000,	0,	40, 1, 3 },
+	{ 72000000,	0,	48, 1, 3 },
+	{ 84000000,	0,	28, 1, 2 },
+	{ 96000000,	0,	32, 1, 2 },
+	{ 32768000,	45264,	43, 1, 4 },
+	{ 45158000,	6903,	30, 1, 3 },
+	{ 49152000,	50332,	32, 1, 3 },
+	{ 67738000,	10398,	45, 1, 3 },
+	{ 73728000,	9961,	49, 1, 3 }
+};
+
+static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+
+	if (clk->rate == rate)	/* Return if nothing changed */
+		return 0;
+
+	epll_con = __raw_readl(S5P_EPLL_CON);
+	epll_con_k = __raw_readl(S5P_EPLL_CON_K);
+
+	epll_con_k &= ~(PLL90XX_KDIV_MASK);
+	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		 if (epll_div[i][0] == rate) {
+			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P_EPLL_CON);
+	__raw_writel(epll_con_k, S5P_EPLL_CON_K);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5p6440_epll_ops = {
+	.get_rate = s5p6440_epll_get_rate,
+	.set_rate = s5p6440_epll_set_rate,
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk    = {
+		.name           = "mout_epll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_epll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name           = "mout_mpll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_mpll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 },
+};
+
+static struct clk clk_h_low = {
+	.name		= "hclk_low",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.ops		= &clk_ops_def_setrate,
+};
+
+static struct clk clk_p_low = {
+	.name		= "pclk_low",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.ops		= &clk_ops_def_setrate,
+};
+
+enum perf_level {
+	L0 = 532*1000,
+	L1 = 266*1000,
+	L2 = 133*1000,
+};
+
+static const u32 clock_table[][3] = {
+	/*{ARM_CLK, DIVarm, DIVhclk}*/
+	{L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)},
+	{L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)},
+	{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)},
+};
+
+static unsigned long s5p6440_armclk_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
+
+	return rate / (clkdiv + 1);
+}
+
+static unsigned long s5p6440_armclk_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	u32 iter;
+
+	for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (rate > clock_table[iter][0])
+			return clock_table[iter-1][0];
+	}
+
+	return clock_table[ARRAY_SIZE(clock_table) - 1][0];
+}
+
+static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 round_tmp;
+	u32 iter;
+	u32 clk_div0_tmp;
+	u32 cur_rate = clk->ops->get_rate(clk);
+	unsigned long flags;
+
+	round_tmp = clk->ops->round_rate(clk, rate);
+	if (round_tmp == cur_rate)
+		return 0;
+
+
+	for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (round_tmp == clock_table[iter][0])
+			break;
+	}
+
+	if (iter >= ARRAY_SIZE(clock_table))
+		iter = ARRAY_SIZE(clock_table) - 1;
+
+	local_irq_save(flags);
+	if (cur_rate > round_tmp) {
+		/* Frequency Down */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+
+	} else {
+		/* Frequency Up */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+		}
+	local_irq_restore(flags);
+
+	clk->rate = clock_table[iter][0];
+
+	return 0;
+}
+
+static struct clk_ops s5p6440_clkarm_ops = {
+	.get_rate	= s5p6440_armclk_get_rate,
+	.set_rate	= s5p6440_armclk_set_rate,
+	.round_rate	= s5p6440_armclk_round_rate,
+};
+
+static unsigned long s5p6440_clk_doutmpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+
+	if (__raw_readl(S5P_CLK_DIV0) & S5P_CLKDIV0_MPLL_MASK)
+		rate /= 2;
+
+	return rate;
+}
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.ops            = &(struct clk_ops) {
+		.get_rate	= s5p6440_clk_doutmpll_get_rate,
+	},
+};
+
+int s5p6440_clk48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5P_OTHERS);
+	if (enable)
+		val |= S5P_OTHERS_USB_SIG_MASK;
+	else
+		val &= ~S5P_OTHERS_USB_SIG_MASK;
+
+	__raw_writel(val, S5P_OTHERS);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int s5p6440_pclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable);
+}
+
+static int s5p6440_hclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable);
+}
+
+static int s5p6440_hclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable);
+}
+
+static int s5p6440_sclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable);
+}
+
+static int s5p6440_mem_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable);
+}
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5p6440_mem_ctrl,
+		.ctrlbit	= S5P_CLKCON_MEM0_HCLK_NFCON,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_TSADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_IIC0,
+	}, {
+		.name		= "i2s_v40",
+		.id		= 0,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_IIS2,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_SPI1,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_SPI0_48,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_SPI1_48,
+	}, {
+		.name		= "mmc_48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_MMC0_48,
+	}, {
+		.name		= "mmc_48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_MMC1_48,
+	}, {
+		.name		= "mmc_48m",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_MMC2_48,
+	}, {
+		.name    	= "otg",
+		.id	   	= -1,
+		.parent  	= &clk_h_low,
+		.enable  	= s5p6440_hclk0_ctrl,
+		.ctrlbit 	= S5P_CLKCON_HCLK0_USB
+	}, {
+		.name    	= "post",
+		.id	   	= -1,
+		.parent  	= &clk_h_low,
+		.enable  	= s5p6440_hclk0_ctrl,
+		.ctrlbit 	= S5P_CLKCON_HCLK0_POST0
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h_low,
+		.enable		= s5p6440_hclk1_ctrl,
+		.ctrlbit	= S5P_CLKCON_HCLK1_DISPCON,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h_low,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h_low,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h_low,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC2,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_WDT,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_PWM,
+	}
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+	{
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_GPIO,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p_low,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_UART3,
+	}
+};
+
+static struct clk clk_iis_cd_v40 = {
+	.name		= "iis_cdclk_v40",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd = {
+	.name		= "pcm_cdclk",
+	.id		= -1,
+};
+
+static struct clk *clkset_spi_mmc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_spi_mmc = {
+	.sources	= clkset_spi_mmc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit        = S5P_CLKCON_SCLK0_MMC0,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_spi_mmc,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit        = S5P_CLKCON_SCLK0_MMC1,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_spi_mmc,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit        = S5P_CLKCON_SCLK0_MMC2,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_spi_mmc,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit        = S5P_CLKCON_SCLK0_UART,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "spi_epll",
+			.id		= 0,
+			.ctrlbit        = S5P_CLKCON_SCLK0_SPI0,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_spi_mmc,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "spi_epll",
+			.id		= 1,
+			.ctrlbit        = S5P_CLKCON_SCLK0_SPI1,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_spi_mmc,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+	}
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+};
+
+void __init_or_cpufreq s5p6440_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk_low;
+	unsigned long pclk;
+	unsigned long pclk_low;
+	unsigned long epll;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned int ptr;
+	u32 clkdiv0;
+	u32 clkdiv3;
+
+	/* Set S5P6440 functions for clk_fout_epll */
+	clk_fout_epll.enable = s5p6440_epll_enable;
+	clk_fout_epll.ops = &s5p6440_epll_ops;
+
+	/* Set S5P6440 functions for arm clock */
+	clk_arm.parent = &clk_mout_apll.clk;
+	clk_arm.ops = &s5p6440_clkarm_ops;
+	clk_48m.enable = s5p6440_clk48m_ctrl;
+
+	clkdiv0 = __raw_readl(S5P_CLK_DIV0);
+	clkdiv3 = __raw_readl(S5P_CLK_DIV3);
+
+	xtal_clk = clk_get(NULL, "ext_xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON),
+				__raw_readl(S5P_EPLL_CON_K));
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502);
+
+	printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+			" E=%ld.%ldMHz\n",
+			print_mhz(apll), print_mhz(mpll), print_mhz(epll));
+
+	fclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_ARM);
+	hclk = fclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK);
+	pclk = hclk / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK);
+
+	if (__raw_readl(S5P_OTHERS) & S5P_OTHERS_HCLK_LOW_SEL_MPLL) {
+		/* Asynchronous mode */
+		hclk_low = mpll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW);
+	} else {
+		/* Synchronous mode */
+		hclk_low = apll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW);
+	}
+
+	pclk_low = hclk_low / GET_DIV(clkdiv3, S5P_CLKDIV3_PCLK_LOW);
+
+	printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+			print_mhz(hclk), print_mhz(hclk_low),
+			print_mhz(pclk), print_mhz(pclk_low));
+
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_apll.rate = apll;
+
+	clk_f.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+	clk_h_low.rate = hclk_low;
+	clk_p_low.rate = pclk_low;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s3c_set_clksrc(init_parents[ptr], true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_mout_epll.clk,
+	&clk_mout_mpll.clk,
+	&clk_dout_mpll,
+	&clk_iis_cd_v40,
+	&clk_pcm_cd,
+	&clk_p_low,
+	&clk_h_low,
+};
+
+void __init s5p6440_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register %u clocks\n", ret);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c
new file mode 100644
index 0000000..1794131a
--- /dev/null
+++ b/arch/arm/mach-s5p6440/cpu.c
@@ -0,0 +1,114 @@
+/* linux/arch/arm/mach-s5p6440/cpu.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5p6440.h>
+
+static void s5p6440_idle(void)
+{
+	unsigned long val;
+
+	if (!need_resched()) {
+		val = __raw_readl(S5P_PWR_CFG);
+		val &= ~(0x3<<5);
+		val |= (0x1<<5);
+		__raw_writel(val, S5P_PWR_CFG);
+
+		cpu_do_idle();
+	}
+	local_irq_enable();
+}
+
+/* s5p6440_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5p6440_map_io(void)
+{
+	/* initialize any device information early */
+}
+
+void __init s5p6440_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6440_register_clocks();
+	s5p6440_setup_clocks();
+}
+
+void __init s5p6440_init_irq(void)
+{
+	/* S5P6440 supports only 2 VIC */
+	u32 vic[2];
+
+	/*
+	 * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
+	 * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
+	 */
+	vic[0] = 0xff800ae7;
+	vic[1] = 0xffbf23e5;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct sysdev_class s5p6440_sysclass = {
+	.name	= "s5p6440-core",
+};
+
+static struct sys_device s5p6440_sysdev = {
+	.cls	= &s5p6440_sysclass,
+};
+
+static int __init s5p6440_core_init(void)
+{
+	return sysdev_class_register(&s5p6440_sysclass);
+}
+
+core_initcall(s5p6440_core_init);
+
+int __init s5p6440_init(void)
+{
+	printk(KERN_INFO "S5P6440: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5p6440_idle;
+
+	return sysdev_register(&s5p6440_sysdev);
+}
diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c
new file mode 100644
index 0000000..b0ea741
--- /dev/null
+++ b/arch/arm/mach-s5p6440/gpio.c
@@ -0,0 +1,322 @@
+/* arch/arm/mach-s5p6440/gpio.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * 		http://www.samsung.com/
+ *
+ * S5P6440 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/regs-gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+/* GPIO bank summary:
+*
+* Bank	GPIOs	Style	SlpCon	ExtInt Group
+* A	6	4Bit	Yes	1
+* B	7	4Bit	Yes	1
+* C	8	4Bit	Yes	2
+* F	2	2Bit	Yes	4 [1]
+* G	7	4Bit	Yes	5
+* H	10	4Bit[2]	Yes	6
+* I	16	2Bit	Yes	None
+* J	12	2Bit	Yes	None
+* N	16	2Bit	No	IRQ_EINT
+* P	8	2Bit	Yes	8
+* R	15	4Bit[2]	Yes	8
+*
+* [1] BANKF pins 14,15 do not form part of the external interrupt sources
+* [2] BANK has two control registers, GPxCON0 and GPxCON1
+*/
+
+static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
+					     unsigned int offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+
+	switch (offset) {
+	case 6:
+		offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		offset -= 7;
+		break;
+	}
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	return 0;
+}
+
+static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
+					      unsigned int offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned con_offset  = offset;
+
+	switch (con_offset) {
+	case 6:
+		con_offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		con_offset -= 7;
+		break;
+	}
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	return 0;
+}
+
+int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
+				   unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift;
+	u32 con;
+
+	switch (off) {
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		shift = (off & 7) * 4;
+		reg -= 4;
+		break;
+	case 6:
+		shift = ((off + 1) & 7) * 4;
+		reg -= 4;
+	default:
+		shift = ((off + 1) & 7) * 4;
+		break;
+	}
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = {
+	{
+		.cfg_eint	= 0,
+	}, {
+		.cfg_eint	= 7,
+	}, {
+		.cfg_eint	= 3,
+		.set_config	= s5p6440_gpio_setcfg_4bit_rbank,
+	}, {
+		.cfg_eint	= 0,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+	}, {
+		.cfg_eint	= 2,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+	}, {
+		.cfg_eint	= 3,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
+	{
+		.base	= S5P6440_GPA_BASE,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPA(0),
+			.ngpio	= S5P6440_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.base	= S5P6440_GPB_BASE,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPB(0),
+			.ngpio	= S5P6440_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S5P6440_GPC_BASE,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPC(0),
+			.ngpio	= S5P6440_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5P6440_GPG_BASE,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPG(0),
+			.ngpio	= S5P6440_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
+	{
+		.base	= S5P6440_GPH_BASE + 0x4,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPH(0),
+			.ngpio	= S5P6440_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	},
+};
+
+static struct s3c_gpio_chip gpio_rbank_4bit2[] = {
+	{
+		.base	= S5P6440_GPR_BASE + 0x4,
+		.config	= &s5p6440_gpio_cfgs[2],
+		.chip	= {
+			.base	= S5P6440_GPR(0),
+			.ngpio	= S5P6440_GPIO_R_NR,
+			.label	= "GPR",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
+	{
+		.base	= S5P6440_GPF_BASE,
+		.config	= &s5p6440_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6440_GPF(0),
+			.ngpio	= S5P6440_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S5P6440_GPI_BASE,
+		.config	= &s5p6440_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6440_GPI(0),
+			.ngpio	= S5P6440_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5P6440_GPJ_BASE,
+		.config	= &s5p6440_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6440_GPJ(0),
+			.ngpio	= S5P6440_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S5P6440_GPN_BASE,
+		.config	= &s5p6440_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6440_GPN(0),
+			.ngpio	= S5P6440_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S5P6440_GPP_BASE,
+		.config	= &s5p6440_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6440_GPP(0),
+			.ngpio	= S5P6440_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	},
+};
+
+void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chipcfg++) {
+		if (!chipcfg->set_config)
+			chipcfg->set_config	= s3c_gpio_setcfg_s3c64xx_4bit;
+		if (!chipcfg->set_pull)
+			chipcfg->set_pull	= s3c_gpio_setpull_updown;
+		if (!chipcfg->get_pull)
+			chipcfg->get_pull	= s3c_gpio_getpull_updown;
+	}
+}
+
+static void __init s5p6440_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
+						int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = s5p6440_gpiolib_rbank_4bit2_input;
+		chip->chip.direction_output =
+					s5p6440_gpiolib_rbank_4bit2_output;
+		s3c_gpiolib_add(chip);
+	}
+}
+
+static int __init s5p6440_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chips = s5p6440_gpio_2bit;
+	int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit);
+
+	s5p6440_gpiolib_set_cfg(s5p6440_gpio_cfgs,
+				ARRAY_SIZE(s5p6440_gpio_cfgs));
+
+	for (; nr_chips > 0; nr_chips--, chips++)
+		s3c_gpiolib_add(chips);
+
+	samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
+				ARRAY_SIZE(s5p6440_gpio_4bit));
+
+	samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
+				ARRAY_SIZE(s5p6440_gpio_4bit2));
+
+	s5p6440_gpio_add_rbank_4bit2(gpio_rbank_4bit2,
+				ARRAY_SIZE(gpio_rbank_4bit2));
+
+	return 0;
+}
+arch_initcall(s5p6440_gpiolib_init);
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
similarity index 77%
copy from arch/arm/mach-s3c6400/include/mach/debug-macro.S
copy to arch/arm/mach-s5p6440/include/mach/debug-macro.S
index 5c88875..48cdb0d 100644
--- a/arch/arm/mach-s3c6400/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
@@ -1,9 +1,7 @@
-/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
+/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S
  *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -21,11 +19,11 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, tmp
+	.macro addruart, rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+		ldrne	\rx, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
 		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
diff --git a/arch/arm/mach-s5p6440/include/mach/entry-macro.S b/arch/arm/mach-s5p6440/include/mach/entry-macro.S
new file mode 100644
index 0000000..e65f1b9
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5P6440
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/mach-s5p6440/include/mach/gpio.h b/arch/arm/mach-s5p6440/include/mach/gpio.h
new file mode 100644
index 0000000..2178383
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/gpio.h
@@ -0,0 +1,80 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5P6440_GPIO_A_NR	(6)
+#define S5P6440_GPIO_B_NR	(7)
+#define S5P6440_GPIO_C_NR	(8)
+#define S5P6440_GPIO_F_NR	(2)
+#define S5P6440_GPIO_G_NR	(7)
+#define S5P6440_GPIO_H_NR	(10)
+#define S5P6440_GPIO_I_NR	(16)
+#define S5P6440_GPIO_J_NR	(12)
+#define S5P6440_GPIO_N_NR	(16)
+#define S5P6440_GPIO_P_NR	(8)
+#define S5P6440_GPIO_R_NR	(15)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+#define S5P6440_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+	S5P6440_GPIO_A_START = 0,
+	S5P6440_GPIO_B_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_A),
+	S5P6440_GPIO_C_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_B),
+	S5P6440_GPIO_F_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_C),
+	S5P6440_GPIO_G_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_F),
+	S5P6440_GPIO_H_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_G),
+	S5P6440_GPIO_I_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_H),
+	S5P6440_GPIO_J_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_I),
+	S5P6440_GPIO_N_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_J),
+	S5P6440_GPIO_P_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_N),
+	S5P6440_GPIO_R_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_P),
+};
+
+/* S5P6440 GPIO number definitions. */
+#define S5P6440_GPA(_nr)	(S5P6440_GPIO_A_START + (_nr))
+#define S5P6440_GPB(_nr)	(S5P6440_GPIO_B_START + (_nr))
+#define S5P6440_GPC(_nr)	(S5P6440_GPIO_C_START + (_nr))
+#define S5P6440_GPF(_nr)	(S5P6440_GPIO_F_START + (_nr))
+#define S5P6440_GPG(_nr)	(S5P6440_GPIO_G_START + (_nr))
+#define S5P6440_GPH(_nr)	(S5P6440_GPIO_H_START + (_nr))
+#define S5P6440_GPI(_nr)	(S5P6440_GPIO_I_START + (_nr))
+#define S5P6440_GPJ(_nr)	(S5P6440_GPIO_J_START + (_nr))
+#define S5P6440_GPN(_nr)	(S5P6440_GPIO_N_START + (_nr))
+#define S5P6440_GPP(_nr)	(S5P6440_GPIO_P_START + (_nr))
+#define S5P6440_GPR(_nr)	(S5P6440_GPIO_R_START + (_nr))
+
+/* the end of the S5P6440 specific gpios */
+#define S5P6440_GPIO_END	(S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
+#define S3C_GPIO_END		S5P6440_GPIO_END
+
+/* define the number of gpios we need to the one after the GPR() range */
+#define ARCH_NR_GPIOS		(S5P6440_GPR(S5P6440_GPIO_R_NR) +	\
+				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/hardware.h b/arch/arm/mach-s5p6440/include/mach/hardware.h
new file mode 100644
index 0000000..be8b26e
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s5p6440/include/mach/io.h
similarity index 72%
copy from arch/arm/plat-s3c/include/mach/io.h
copy to arch/arm/mach-s5p6440/include/mach/io.h
index f6a5363..fa2d69c 100644
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ b/arch/arm/mach-s5p6440/include/mach/io.h
@@ -1,9 +1,9 @@
-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s5p6440/include/mach/io.h
  *
  * Copyright 2008 Simtec Electronics
  *	Ben Dooks <ben-linux@fluff.org>
  *
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S3C64XX based
  */
 
 #ifndef __ASM_ARM_ARCH_IO_H
diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h
new file mode 100644
index 0000000..a4b9b40
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/irqs.h
@@ -0,0 +1,111 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_S5P_IRQS_H
+#define __ASM_ARCH_S5P_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0 */
+
+#define IRQ_EINT0_3		S5P_IRQ_VIC0(0)
+#define IRQ_EINT4_11		S5P_IRQ_VIC0(1)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(2)
+#define IRQ_IIC1		S5P_IRQ_VIC0(5)
+#define IRQ_I2SV40		S5P_IRQ_VIC0(6)
+#define IRQ_GPS			S5P_IRQ_VIC0(7)
+#define IRQ_POST0		S5P_IRQ_VIC0(9)
+#define IRQ_2D			S5P_IRQ_VIC0(11)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_WDT			S5P_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(28)
+#define IRQ_DISPCON0		S5P_IRQ_VIC0(29)
+#define IRQ_DISPCON1		S5P_IRQ_VIC0(30)
+#define IRQ_DISPCON2		S5P_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_15		S5P_IRQ_VIC1(0)
+#define IRQ_PCM0		S5P_IRQ_VIC1(2)
+#define IRQ_UART0		S5P_IRQ_VIC1(5)
+#define IRQ_UART1		S5P_IRQ_VIC1(6)
+#define IRQ_UART2		S5P_IRQ_VIC1(7)
+#define IRQ_UART3		S5P_IRQ_VIC1(8)
+#define IRQ_DMA0		S5P_IRQ_VIC1(9)
+#define IRQ_NFC			S5P_IRQ_VIC1(13)
+#define IRQ_SPI0		S5P_IRQ_VIC1(16)
+#define IRQ_SPI1		S5P_IRQ_VIC1(17)
+#define IRQ_IIC			S5P_IRQ_VIC1(18)
+#define IRQ_DISPCON3		S5P_IRQ_VIC1(19)
+#define IRQ_FIMGVG		S5P_IRQ_VIC1(20)
+#define IRQ_EINT_GROUPS		S5P_IRQ_VIC1(21)
+#define IRQ_PMUIRQ		S5P_IRQ_VIC1(23)
+#define IRQ_HSMMC0		S5P_IRQ_VIC1(24)
+#define IRQ_HSMMC1		S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
+#define IRQ_OTG			S5P_IRQ_VIC1(26)
+#define IRQ_DSI			S5P_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC1(28)
+#define IRQ_TSI			S5P_IRQ_VIC1(29)
+#define IRQ_PENDN		S5P_IRQ_VIC1(30)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_ADC			S5P_IRQ_VIC1(31)
+
+/*
+ * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
+ * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
+ * after the pair of VICs.
+ */
+
+#define S5P_IRQ_EINT_BASE	(S5P_IRQ_VIC1(31) + 6)
+
+#define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S5P_EINT(x)
+
+/*
+ * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+/* Actually, #6 and #7 are missing in the EINT_GROUP1 */
+#define IRQ_EINT_GROUP1_NR	(15)
+#define IRQ_EINT_GROUP2_NR	(8)
+#define IRQ_EINT_GROUP5_NR	(7)
+#define IRQ_EINT_GROUP6_NR	(10)
+/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */
+#define IRQ_EINT_GROUP8_NR	(11)
+
+#define IRQ_EINT_GROUP_BASE	S5P_EINT(16)
+#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0)
+#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+
+#define IRQ_EINT_GROUP(grp, x)	(IRQ_EINT_GROUP##grp##_BASE + (x))
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS			(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
+
+#endif /* __ASM_ARCH_S5P_IRQS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h
new file mode 100644
index 0000000..8924e5a
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/map.h
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/map.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P6440_PA_CHIPID	(0xE0000000)
+#define S5P_PA_CHIPID		S5P6440_PA_CHIPID
+
+#define S5P6440_PA_SYSCON	(0xE0100000)
+#define S5P6440_PA_CLK		(S5P6440_PA_SYSCON + 0x0)
+#define S5P_PA_SYSCON		S5P6440_PA_SYSCON
+
+#define S5P6440_PA_GPIO		(0xE0308000)
+#define S5P_PA_GPIO		S5P6440_PA_GPIO
+
+#define S5P6440_PA_VIC0		(0xE4000000)
+#define S5P_PA_VIC0		S5P6440_PA_VIC0
+
+#define S5P6440_PA_VIC1		(0xE4100000)
+#define S5P_PA_VIC1		S5P6440_PA_VIC1
+
+#define S5P6440_PA_TIMER	(0xEA000000)
+#define S5P_PA_TIMER		S5P6440_PA_TIMER
+
+#define S5P6440_PA_RTC		(0xEA100000)
+#define S5P_PA_RTC		S5P6440_PA_RTC
+
+#define S5P6440_PA_WDT		(0xEA200000)
+#define S5P_PA_WDT		S5P6440_PA_WDT
+
+#define S5P6440_PA_UART		(0xEC000000)
+
+#define S5P_PA_UART0		(S5P6440_PA_UART + 0x0)
+#define S5P_PA_UART1		(S5P6440_PA_UART + 0x400)
+#define S5P_PA_UART2		(S5P6440_PA_UART + 0x800)
+#define S5P_PA_UART3		(S5P6440_PA_UART + 0xC00)
+
+#define S5P_SZ_UART		SZ_256
+
+#define S5P6440_PA_IIC0		(0xEC104000)
+
+#define S5P6440_PA_HSOTG	(0xED100000)
+
+#define S5P6440_PA_HSMMC0	(0xED800000)
+#define S5P6440_PA_HSMMC1	(0xED900000)
+#define S5P6440_PA_HSMMC2	(0xEDA00000)
+
+#define S5P6440_PA_SDRAM	(0x20000000)
+#define S5P_PA_SDRAM		S5P6440_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART		S5P6440_PA_UART
+#define S3C_PA_IIC		S5P6440_PA_IIC0
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/memory.h b/arch/arm/mach-s5p6440/include/mach/memory.h
new file mode 100644
index 0000000..d62910c
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/memory.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET     	UL(0x20000000)
+#define CONSISTENT_DMA_SIZE	SZ_8M
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
new file mode 100644
index 0000000..c4bb7c5
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
@@ -0,0 +1,62 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @cfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg == S3C2410_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << (1 + tcfg1);
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 0;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div) - 1;
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
new file mode 100644
index 0000000..c783ecc
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK		S5P_CLKREG(0x04)
+#define S5P_EPLL_LOCK		S5P_CLKREG(0x08)
+#define S5P_APLL_CON		S5P_CLKREG(0x0C)
+#define S5P_MPLL_CON		S5P_CLKREG(0x10)
+#define S5P_EPLL_CON		S5P_CLKREG(0x14)
+#define S5P_EPLL_CON_K		S5P_CLKREG(0x18)
+#define S5P_CLK_SRC0		S5P_CLKREG(0x1C)
+#define S5P_CLK_DIV0		S5P_CLKREG(0x20)
+#define S5P_CLK_DIV1		S5P_CLKREG(0x24)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x28)
+#define S5P_CLK_OUT		S5P_CLKREG(0x2C)
+#define S5P_CLK_GATE_HCLK0	S5P_CLKREG(0x30)
+#define S5P_CLK_GATE_PCLK	S5P_CLKREG(0x34)
+#define S5P_CLK_GATE_SCLK0	S5P_CLKREG(0x38)
+#define S5P_CLK_GATE_MEM0	S5P_CLKREG(0x3C)
+#define S5P_CLK_DIV3		S5P_CLKREG(0x40)
+#define S5P_CLK_GATE_HCLK1	S5P_CLKREG(0x44)
+#define S5P_CLK_GATE_SCLK1	S5P_CLKREG(0x48)
+#define S5P_AHB_CON0           	S5P_CLKREG(0x100)
+#define S5P_CLK_SRC1           	S5P_CLKREG(0x10C)
+#define S5P_SWRESET		S5P_CLKREG(0x114)
+#define S5P_SYS_ID		S5P_CLKREG(0x118)
+#define S5P_SYS_OTHERS		S5P_CLKREG(0x11C)
+#define S5P_MEM_CFG_STAT	S5P_CLKREG(0x12C)
+#define S5P_PWR_CFG		S5P_CLKREG(0x804)
+#define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0x808)
+#define S5P_NORMAL_CFG		S5P_CLKREG(0x810)
+#define S5P_STOP_CFG		S5P_CLKREG(0x814)
+#define S5P_SLEEP_CFG		S5P_CLKREG(0x818)
+#define S5P_OSC_FREQ		S5P_CLKREG(0x820)
+#define S5P_OSC_STABLE		S5P_CLKREG(0x824)
+#define S5P_PWR_STABLE		S5P_CLKREG(0x828)
+#define S5P_MTC_STABLE		S5P_CLKREG(0x830)
+#define S5P_OTHERS		S5P_CLKREG(0x900)
+#define S5P_RST_STAT		S5P_CLKREG(0x904)
+#define S5P_WAKEUP_STAT		S5P_CLKREG(0x908)
+#define S5P_SLPEN		S5P_CLKREG(0x930)
+#define S5P_INFORM0		S5P_CLKREG(0xA00)
+#define S5P_INFORM1		S5P_CLKREG(0xA04)
+#define S5P_INFORM2		S5P_CLKREG(0xA08)
+#define S5P_INFORM3		S5P_CLKREG(0xA0C)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_PCLK_MASK		(0xf << 12)
+#define S5P_CLKDIV0_PCLK_SHIFT		(12)
+#define S5P_CLKDIV0_HCLK_MASK		(0xf << 8)
+#define S5P_CLKDIV0_HCLK_SHIFT		(8)
+#define S5P_CLKDIV0_MPLL_MASK		(0x1 << 4)
+#define S5P_CLKDIV0_ARM_MASK		(0xf << 0)
+#define S5P_CLKDIV0_ARM_SHIFT		(0)
+
+/* CLKDIV3 */
+#define S5P_CLKDIV3_PCLK_LOW_MASK	(0xf << 12)
+#define S5P_CLKDIV3_PCLK_LOW_SHIFT	(12)
+#define S5P_CLKDIV3_HCLK_LOW_MASK	(0xf << 8)
+#define S5P_CLKDIV3_HCLK_LOW_SHIFT	(8)
+
+/* HCLK0 GATE Registers */
+#define S5P_CLKCON_HCLK0_USB		(1<<20)
+#define S5P_CLKCON_HCLK0_HSMMC2		(1<<19)
+#define S5P_CLKCON_HCLK0_HSMMC1		(1<<18)
+#define S5P_CLKCON_HCLK0_HSMMC0		(1<<17)
+#define S5P_CLKCON_HCLK0_POST0		(1<<5)
+
+/* HCLK1 GATE Registers */
+#define S5P_CLKCON_HCLK1_DISPCON	(1<<1)
+
+/* PCLK GATE Registers */
+#define S5P_CLKCON_PCLK_IIS2		(1<<26)
+#define S5P_CLKCON_PCLK_SPI1		(1<<22)
+#define S5P_CLKCON_PCLK_SPI0		(1<<21)
+#define S5P_CLKCON_PCLK_GPIO		(1<<18)
+#define S5P_CLKCON_PCLK_IIC0		(1<<17)
+#define S5P_CLKCON_PCLK_TSADC		(1<<12)
+#define S5P_CLKCON_PCLK_PWM		(1<<7)
+#define S5P_CLKCON_PCLK_RTC		(1<<6)
+#define S5P_CLKCON_PCLK_WDT		(1<<5)
+#define S5P_CLKCON_PCLK_UART3		(1<<4)
+#define S5P_CLKCON_PCLK_UART2		(1<<3)
+#define S5P_CLKCON_PCLK_UART1		(1<<2)
+#define S5P_CLKCON_PCLK_UART0		(1<<1)
+
+/* SCLK0 GATE Registers */
+#define S5P_CLKCON_SCLK0_MMC2_48	(1<<29)
+#define S5P_CLKCON_SCLK0_MMC1_48	(1<<28)
+#define S5P_CLKCON_SCLK0_MMC0_48	(1<<27)
+#define S5P_CLKCON_SCLK0_MMC2		(1<<26)
+#define S5P_CLKCON_SCLK0_MMC1		(1<<25)
+#define S5P_CLKCON_SCLK0_MMC0		(1<<24)
+#define S5P_CLKCON_SCLK0_SPI1_48 	(1<<23)
+#define S5P_CLKCON_SCLK0_SPI0_48 	(1<<22)
+#define S5P_CLKCON_SCLK0_SPI1		(1<<21)
+#define S5P_CLKCON_SCLK0_SPI0		(1<<20)
+#define S5P_CLKCON_SCLK0_UART		(1<<5)
+
+/* SCLK1 GATE Registers */
+
+/* MEM0 GATE Registers */
+#define S5P_CLKCON_MEM0_HCLK_NFCON	(1<<2)
+
+/*OTHERS Resgister */
+#define S5P_OTHERS_USB_SIG_MASK		(1<<16)
+#define S5P_OTHERS_HCLK_LOW_SEL_MPLL	(1<<6)
+
+/* Compatibility defines */
+#define ARM_CLK_DIV			S5P_CLK_DIV0
+#define ARM_DIV_RATIO_SHIFT		0
+#define ARM_DIV_MASK			(0xf << ARM_DIV_RATIO_SHIFT)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h b/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
new file mode 100644
index 0000000..82ff753
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - GPIO register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* Base addresses for each of the banks */
+#define S5P6440_GPA_BASE		(S5P_VA_GPIO + 0x0000)
+#define S5P6440_GPB_BASE		(S5P_VA_GPIO + 0x0020)
+#define S5P6440_GPC_BASE		(S5P_VA_GPIO + 0x0040)
+#define S5P6440_GPF_BASE		(S5P_VA_GPIO + 0x00A0)
+#define S5P6440_GPG_BASE		(S5P_VA_GPIO + 0x00C0)
+#define S5P6440_GPH_BASE		(S5P_VA_GPIO + 0x00E0)
+#define S5P6440_GPI_BASE		(S5P_VA_GPIO + 0x0100)
+#define S5P6440_GPJ_BASE		(S5P_VA_GPIO + 0x0120)
+#define S5P6440_GPN_BASE		(S5P_VA_GPIO + 0x0830)
+#define S5P6440_GPP_BASE		(S5P_VA_GPIO + 0x0160)
+#define S5P6440_GPR_BASE		(S5P_VA_GPIO + 0x0290)
+#define S5P6440_EINT0CON0		(S5P_VA_GPIO + 0x900)
+#define S5P6440_EINT0FLTCON0		(S5P_VA_GPIO + 0x910)
+#define S5P6440_EINT0FLTCON1		(S5P_VA_GPIO + 0x914)
+#define S5P6440_EINT0MASK		(S5P_VA_GPIO + 0x920)
+#define S5P6440_EINT0PEND		(S5P_VA_GPIO + 0x924)
+
+/* for LCD */
+#define S5P6440_SPCON_LCD_SEL_RGB	(1 << 0)
+#define S5P6440_SPCON_LCD_SEL_MASK	(3 << 0)
+
+/* These set of macros are not really useful for the
+ * GPF/GPI/GPJ/GPN/GPP,
+ * useful for others set of GPIO's (4 bit)
+ */
+#define S5P6440_GPIO_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S5P6440_GPIO_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S5P6440_GPIO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+/* Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit)
+ * */
+#define S5P6440_GPIO2_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S5P6440_GPIO2_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S5P6440_GPIO2_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-irq.h b/arch/arm/mach-s5p6440/include/mach/regs-irq.h
new file mode 100644
index 0000000..a961f4b
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p6440/include/mach/system.h
new file mode 100644
index 0000000..d2dd817
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/system.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p6440/include/mach/tick.h
new file mode 100644
index 0000000..2f25c7f
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/tick.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/tick.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s5p6440/include/mach/timex.h
similarity index 89%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s5p6440/include/mach/timex.h
index 2a425ed..fb2e8cd 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s5p6440/include/mach/timex.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* arch/arm/mach-s3c64xx/include/mach/timex.h
  *
  * Copyright (c) 2003-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - time parameters
+ * S3C6400 - time parameters
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,8 +19,6 @@
  * for the time conversion functions to/from jiffies is acceptable.
 */
 
-
 #define CLOCK_TICK_RATE 12000000
 
-
 #endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/uncompress.h b/arch/arm/mach-s5p6440/include/mach/uncompress.h
new file mode 100644
index 0000000..7c1f600d
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p6440/include/mach/vmalloc.h
new file mode 100644
index 0000000..16df257
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6440/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6440/init.c b/arch/arm/mach-s5p6440/init.c
new file mode 100644
index 0000000..a1f3727
--- /dev/null
+++ b/arch/arm/mach-s5p6440/init.c
@@ -0,0 +1,52 @@
+/* linux/arch/arm/mach-s5p6440/init.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Init support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5p6440.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk_low",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+	[1] = {
+		.name		= "uclk1",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5p6440_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks);
+		}
+	}
+
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
new file mode 100644
index 0000000..3ae88f2
--- /dev/null
+++ b/arch/arm/mach-s5p6440/mach-smdk6440.c
@@ -0,0 +1,111 @@
+/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/s5p6440.h>
+#include <plat/clock.h>
+#include <mach/regs-clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+
+#define S5P6440_UCON_DEFAULT    (S3C2410_UCON_TXILEVEL |	\
+				S3C2410_UCON_RXILEVEL |		\
+				S3C2410_UCON_TXIRQMODE |	\
+				S3C2410_UCON_RXIRQMODE |	\
+				S3C2410_UCON_RXFIFO_TOI |	\
+				S3C2443_UCON_RXERR_IRQEN)
+
+#define S5P6440_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5P6440_UFCON_DEFAULT   (S3C2410_UFCON_FIFOMODE |	\
+				S3C2440_UFCON_TXTRIG16 |	\
+				S3C2410_UFCON_RXTRIG8)
+
+static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = S5P6440_UCON_DEFAULT,
+		.ulcon	     = S5P6440_ULCON_DEFAULT,
+		.ufcon	     = S5P6440_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = S5P6440_UCON_DEFAULT,
+		.ulcon	     = S5P6440_ULCON_DEFAULT,
+		.ufcon	     = S5P6440_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = S5P6440_UCON_DEFAULT,
+		.ulcon	     = S5P6440_ULCON_DEFAULT,
+		.ufcon	     = S5P6440_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = S5P6440_UCON_DEFAULT,
+		.ulcon	     = S5P6440_ULCON_DEFAULT,
+		.ufcon	     = S5P6440_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *smdk6440_devices[] __initdata = {
+};
+
+static void __init smdk6440_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_SYS_ID);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
+}
+
+static void __init smdk6440_machine_init(void)
+{
+	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
+}
+
+MACHINE_START(SMDK6440, "SMDK6440")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+
+	.init_irq	= s5p6440_init_irq,
+	.map_io		= smdk6440_map_io,
+	.init_machine	= smdk6440_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig
new file mode 100644
index 0000000..4f3f6de
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Kconfig
@@ -0,0 +1,24 @@
+# arch/arm/mach-s5p6442/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5P6442
+
+if ARCH_S5P6442
+
+config CPU_S5P6442
+	bool
+	select PLAT_S5P
+	help
+	  Enable S5P6442 CPU support
+
+config MACH_SMDK6442
+	bool "SMDK6442"
+	select CPU_S5P6442
+	help
+	  Machine support for Samsung SMDK6442
+
+endif
diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile
new file mode 100644
index 0000000..dde39a6
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Makefile
@@ -0,0 +1,19 @@
+# arch/arm/mach-s5p6442/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5P6442 system
+
+obj-$(CONFIG_CPU_S5P6442)	+= cpu.o init.o clock.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6442)	+= mach-smdk6442.o
diff --git a/arch/arm/mach-s5p6442/Makefile.boot b/arch/arm/mach-s5p6442/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c
new file mode 100644
index 0000000..3aadbf4
--- /dev/null
+++ b/arch/arm/mach-s5p6442/clock.c
@@ -0,0 +1,396 @@
+/* linux/arch/arm/mach-s5p6442/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6442.h>
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_apll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_mpll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_epll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+/* Possible clock sources for ARM Mux */
+static struct clk *clk_src_arm_list[] = {
+	[1] = &clk_mout_apll.clk,
+	[2] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_arm = {
+	.sources	= clk_src_arm_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_arm_list),
+};
+
+static struct clksrc_clk clk_mout_arm = {
+	.clk	= {
+		.name		= "mout_arm",
+		.id		= -1,
+	},
+	.sources	= &clk_src_arm,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
+};
+
+static struct clk clk_dout_a2m = {
+	.name		= "dout_a2m",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+};
+
+/* Possible clock sources for D0 Mux */
+static struct clk *clk_src_d0_list[] = {
+	[1] = &clk_mout_mpll.clk,
+	[2] = &clk_dout_a2m,
+};
+
+static struct clksrc_sources clk_src_d0 = {
+	.sources	= clk_src_d0_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_d0_list),
+};
+
+static struct clksrc_clk clk_mout_d0 = {
+	.clk = {
+		.name		= "mout_d0",
+		.id		= -1,
+	},
+	.sources	= &clk_src_d0,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 },
+};
+
+static struct clk clk_dout_apll = {
+	.name		= "dout_apll",
+	.id		= -1,
+	.parent		= &clk_mout_arm.clk,
+};
+
+/* Possible clock sources for D0SYNC Mux */
+static struct clk *clk_src_d0sync_list[] = {
+	[1] = &clk_mout_d0.clk,
+	[2] = &clk_dout_apll,
+};
+
+static struct clksrc_sources clk_src_d0sync = {
+	.sources	= clk_src_d0sync_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_d0sync_list),
+};
+
+static struct clksrc_clk clk_mout_d0sync = {
+	.clk	= {
+		.name		= "mout_d0sync",
+		.id		= -1,
+	},
+	.sources	= &clk_src_d0sync,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+};
+
+/* Possible clock sources for D1 Mux */
+static struct clk *clk_src_d1_list[] = {
+	[1] = &clk_mout_mpll.clk,
+	[2] = &clk_dout_a2m,
+};
+
+static struct clksrc_sources clk_src_d1 = {
+	.sources	= clk_src_d1_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_d1_list),
+};
+
+static struct clksrc_clk clk_mout_d1 = {
+	.clk	= {
+		.name		= "mout_d1",
+		.id		= -1,
+	},
+	.sources	= &clk_src_d1,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 },
+};
+
+/* Possible clock sources for D1SYNC Mux */
+static struct clk *clk_src_d1sync_list[] = {
+	[1] = &clk_mout_d1.clk,
+	[2] = &clk_dout_apll,
+};
+
+static struct clksrc_sources clk_src_d1sync = {
+	.sources	= clk_src_d1sync_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_d1sync_list),
+};
+
+static struct clksrc_clk clk_mout_d1sync = {
+	.clk	= {
+		.name		= "mout_d1sync",
+		.id		= -1,
+	},
+	.sources	= &clk_src_d1sync,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+};
+
+static struct clk clk_hclkd0 = {
+	.name		= "hclkd0",
+	.id		= -1,
+	.parent		= &clk_mout_d0sync.clk,
+};
+
+static struct clk clk_hclkd1 = {
+	.name		= "hclkd1",
+	.id		= -1,
+	.parent		= &clk_mout_d1sync.clk,
+};
+
+static struct clk clk_pclkd0 = {
+	.name		= "pclkd0",
+	.id		= -1,
+	.parent		= &clk_hclkd0,
+};
+
+static struct clk clk_pclkd1 = {
+	.name		= "pclkd1",
+	.id		= -1,
+	.parent		= &clk_hclkd1,
+};
+
+int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "dout_a2m",
+			.id		= -1,
+			.parent		= &clk_mout_apll.clk,
+		},
+		.sources = &clk_src_apll,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "dout_apll",
+			.id		= -1,
+			.parent		= &clk_mout_arm.clk,
+		},
+		.sources = &clk_src_arm,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "hclkd1",
+			.id		= -1,
+			.parent		= &clk_mout_d1sync.clk,
+		},
+		.sources = &clk_src_d1sync,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "hclkd0",
+			.id		= -1,
+			.parent		= &clk_mout_d0sync.clk,
+		},
+		.sources = &clk_src_d0sync,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "pclkd0",
+			.id		= -1,
+			.parent		= &clk_hclkd0,
+		},
+		.sources = &clk_src_d0sync,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "pclkd1",
+			.id		= -1,
+			.parent		= &clk_hclkd1,
+		},
+		.sources = &clk_src_d1sync,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 },
+	}
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_mpll,
+	&clk_mout_epll,
+	&clk_mout_arm,
+	&clk_mout_d0,
+	&clk_mout_d0sync,
+	&clk_mout_d1,
+	&clk_mout_d1sync,
+};
+
+void __init_or_cpufreq s5p6442_setup_clocks(void)
+{
+	struct clk *pclkd0_clk;
+	struct clk *pclkd1_clk;
+
+	unsigned long xtal;
+	unsigned long arm;
+	unsigned long hclkd0 = 0;
+	unsigned long hclkd1 = 0;
+	unsigned long pclkd0 = 0;
+	unsigned long pclkd1 = 0;
+
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned int ptr;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	xtal = clk_get_rate(&clk_xtal);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+
+	printk(KERN_INFO "S5P6440: PLL settings, A=%ld, M=%ld, E=%ld",
+			apll, mpll, epll);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s3c_set_clksrc(init_parents[ptr], true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+
+	arm = clk_get_rate(&clk_dout_apll);
+	hclkd0 = clk_get_rate(&clk_hclkd0);
+	hclkd1 = clk_get_rate(&clk_hclkd1);
+
+	pclkd0_clk = clk_get(NULL, "pclkd0");
+	BUG_ON(IS_ERR(pclkd0_clk));
+
+	pclkd0 = clk_get_rate(pclkd0_clk);
+	clk_put(pclkd0_clk);
+
+	pclkd1_clk = clk_get(NULL, "pclkd1");
+	BUG_ON(IS_ERR(pclkd1_clk));
+
+	pclkd1 = clk_get_rate(pclkd1_clk);
+	clk_put(pclkd1_clk);
+
+	printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n",
+			hclkd0, hclkd1, pclkd0, pclkd1);
+
+	/* For backward compatibility */
+	clk_f.rate = arm;
+	clk_h.rate = hclkd1;
+	clk_p.rate = pclkd1;
+
+	clk_pclkd0.rate = pclkd0;
+	clk_pclkd1.rate = pclkd1;
+}
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<16),
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<17),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<18),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<19),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<23),
+	},
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_mout_apll.clk,
+	&clk_mout_mpll.clk,
+	&clk_mout_epll.clk,
+	&clk_mout_d0.clk,
+	&clk_mout_d0sync.clk,
+	&clk_mout_d1.clk,
+	&clk_mout_d1sync.clk,
+	&clk_hclkd0,
+	&clk_pclkd0,
+	&clk_hclkd1,
+	&clk_pclkd1,
+};
+
+void __init s5p6442_register_clocks(void)
+{
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c
new file mode 100644
index 0000000..bc2524d
--- /dev/null
+++ b/arch/arm/mach-s5p6442/cpu.c
@@ -0,0 +1,121 @@
+/* linux/arch/arm/mach-s5p6442/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5p6442.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5p6442_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
+		.pfn		= __phys_to_pfn(S5P6442_PA_SYSTIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC2,
+		.pfn		= __phys_to_pfn(S5P6442_PA_VIC2),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}
+};
+
+static void s5p6442_idle(void)
+{
+	if (!need_resched())
+		cpu_do_idle();
+
+	local_irq_enable();
+}
+
+/* s5p6442_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5p6442_map_io(void)
+{
+	iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc));
+}
+
+void __init s5p6442_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6442_register_clocks();
+	s5p6442_setup_clocks();
+}
+
+void __init s5p6442_init_irq(void)
+{
+	/* S5P6442 supports 3 VIC */
+	u32 vic[3];
+
+	/* VIC0, VIC1, and VIC2: some interrupt reserved */
+	vic[0] = 0x7fefffff;
+	vic[1] = 0X7f389c81;
+	vic[2] = 0X1bbbcfff;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct sysdev_class s5p6442_sysclass = {
+	.name	= "s5p6442-core",
+};
+
+static struct sys_device s5p6442_sysdev = {
+	.cls	= &s5p6442_sysclass,
+};
+
+static int __init s5p6442_core_init(void)
+{
+	return sysdev_class_register(&s5p6442_sysclass);
+}
+
+core_initcall(s5p6442_core_init);
+
+int __init s5p6442_init(void)
+{
+	printk(KERN_INFO "S5P6442: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5p6442_idle;
+
+	return sysdev_register(&s5p6442_sysdev);
+}
diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
new file mode 100644
index 0000000..1aae691
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
@@ -0,0 +1,36 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6442/include/mach/entry-macro.S b/arch/arm/mach-s5p6442/include/mach/entry-macro.S
new file mode 100644
index 0000000..6d574ed
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/entry-macro.S
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5P6442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S5P_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic2
+	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-s5p6442/include/mach/gpio.h b/arch/arm/mach-s5p6442/include/mach/gpio.h
new file mode 100644
index 0000000..b8715df
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/gpio.h
@@ -0,0 +1,123 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5P6442_GPIO_A0_NR	(8)
+#define S5P6442_GPIO_A1_NR	(2)
+#define S5P6442_GPIO_B_NR	(4)
+#define S5P6442_GPIO_C0_NR	(5)
+#define S5P6442_GPIO_C1_NR	(5)
+#define S5P6442_GPIO_D0_NR	(2)
+#define S5P6442_GPIO_D1_NR	(6)
+#define S5P6442_GPIO_E0_NR	(8)
+#define S5P6442_GPIO_E1_NR	(5)
+#define S5P6442_GPIO_F0_NR	(8)
+#define S5P6442_GPIO_F1_NR	(8)
+#define S5P6442_GPIO_F2_NR	(8)
+#define S5P6442_GPIO_F3_NR	(6)
+#define S5P6442_GPIO_G0_NR	(7)
+#define S5P6442_GPIO_G1_NR	(7)
+#define S5P6442_GPIO_G2_NR	(7)
+#define S5P6442_GPIO_H0_NR	(8)
+#define S5P6442_GPIO_H1_NR	(8)
+#define S5P6442_GPIO_H2_NR	(8)
+#define S5P6442_GPIO_H3_NR	(8)
+#define S5P6442_GPIO_J0_NR	(8)
+#define S5P6442_GPIO_J1_NR	(6)
+#define S5P6442_GPIO_J2_NR	(8)
+#define S5P6442_GPIO_J3_NR	(8)
+#define S5P6442_GPIO_J4_NR	(5)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5P6442_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+	S5P6442_GPIO_A0_START	= 0,
+	S5P6442_GPIO_A1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_A0),
+	S5P6442_GPIO_B_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_A1),
+	S5P6442_GPIO_C0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_B),
+	S5P6442_GPIO_C1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_C0),
+	S5P6442_GPIO_D0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_C1),
+	S5P6442_GPIO_D1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_D0),
+	S5P6442_GPIO_E0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_D1),
+	S5P6442_GPIO_E1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_E0),
+	S5P6442_GPIO_F0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_E1),
+	S5P6442_GPIO_F1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F0),
+	S5P6442_GPIO_F2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F1),
+	S5P6442_GPIO_F3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F2),
+	S5P6442_GPIO_G0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F3),
+	S5P6442_GPIO_G1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G0),
+	S5P6442_GPIO_G2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G1),
+	S5P6442_GPIO_H0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G2),
+	S5P6442_GPIO_H1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H0),
+	S5P6442_GPIO_H2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H1),
+	S5P6442_GPIO_H3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H2),
+	S5P6442_GPIO_J0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H3),
+	S5P6442_GPIO_J1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J0),
+	S5P6442_GPIO_J2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J1),
+	S5P6442_GPIO_J3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J2),
+	S5P6442_GPIO_J4_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J3),
+};
+
+/* S5P6442 GPIO number definitions. */
+#define S5P6442_GPA0(_nr)	(S5P6442_GPIO_A0_START + (_nr))
+#define S5P6442_GPA1(_nr)	(S5P6442_GPIO_A1_START + (_nr))
+#define S5P6442_GPB(_nr)	(S5P6442_GPIO_B_START + (_nr))
+#define S5P6442_GPC0(_nr)	(S5P6442_GPIO_C0_START + (_nr))
+#define S5P6442_GPC1(_nr)	(S5P6442_GPIO_C1_START + (_nr))
+#define S5P6442_GPD0(_nr)	(S5P6442_GPIO_D0_START + (_nr))
+#define S5P6442_GPD1(_nr)	(S5P6442_GPIO_D1_START + (_nr))
+#define S5P6442_GPE0(_nr)	(S5P6442_GPIO_E0_START + (_nr))
+#define S5P6442_GPE1(_nr)	(S5P6442_GPIO_E1_START + (_nr))
+#define S5P6442_GPF0(_nr)	(S5P6442_GPIO_F0_START + (_nr))
+#define S5P6442_GPF1(_nr)	(S5P6442_GPIO_F1_START + (_nr))
+#define S5P6442_GPF2(_nr)	(S5P6442_GPIO_F2_START + (_nr))
+#define S5P6442_GPF3(_nr)	(S5P6442_GPIO_F3_START + (_nr))
+#define S5P6442_GPG0(_nr)	(S5P6442_GPIO_G0_START + (_nr))
+#define S5P6442_GPG1(_nr)	(S5P6442_GPIO_G1_START + (_nr))
+#define S5P6442_GPG2(_nr)	(S5P6442_GPIO_G2_START + (_nr))
+#define S5P6442_GPH0(_nr)	(S5P6442_GPIO_H0_START + (_nr))
+#define S5P6442_GPH1(_nr)	(S5P6442_GPIO_H1_START + (_nr))
+#define S5P6442_GPH2(_nr)	(S5P6442_GPIO_H2_START + (_nr))
+#define S5P6442_GPH3(_nr)	(S5P6442_GPIO_H3_START + (_nr))
+#define S5P6442_GPJ0(_nr)	(S5P6442_GPIO_J0_START + (_nr))
+#define S5P6442_GPJ1(_nr)	(S5P6442_GPIO_J1_START + (_nr))
+#define S5P6442_GPJ2(_nr)	(S5P6442_GPIO_J2_START + (_nr))
+#define S5P6442_GPJ3(_nr)	(S5P6442_GPIO_J3_START + (_nr))
+#define S5P6442_GPJ4(_nr)	(S5P6442_GPIO_J4_START + (_nr))
+
+/* the end of the S5P6442 specific gpios */
+#define S5P6442_GPIO_END	(S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1)
+#define S3C_GPIO_END		S5P6442_GPIO_END
+
+/* define the number of gpios we need to the one after the GPJ4() range */
+#define ARCH_NR_GPIOS		(S5P6442_GPJ4(S5P6442_GPIO_J4_NR) +	\
+				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/hardware.h b/arch/arm/mach-s5p6442/include/mach/hardware.h
new file mode 100644
index 0000000..8cd7b67
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/io.h b/arch/arm/mach-s5p6442/include/mach/io.h
new file mode 100644
index 0000000..5d2195a
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/io.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5P6442
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h
new file mode 100644
index 0000000..da66580
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/irqs.h
@@ -0,0 +1,86 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0 */
+#define IRQ_EINT16_31 		S5P_IRQ_VIC0(16)
+#define IRQ_BATF 		S5P_IRQ_VIC0(17)
+#define IRQ_MDMA 		S5P_IRQ_VIC0(18)
+#define IRQ_PDMA 		S5P_IRQ_VIC0(19)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
+#define IRQ_WDT			S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
+
+/* VIC1 */
+#define IRQ_nPMUIRQ 		S5P_IRQ_VIC1(0)
+#define IRQ_ONENAND 		S5P_IRQ_VIC1(7)
+#define IRQ_UART0 		S5P_IRQ_VIC1(10)
+#define IRQ_UART1 		S5P_IRQ_VIC1(11)
+#define IRQ_UART2 		S5P_IRQ_VIC1(12)
+#define IRQ_SPI0 		S5P_IRQ_VIC1(15)
+#define IRQ_IIC 		S5P_IRQ_VIC1(19)
+#define IRQ_IIC1 		S5P_IRQ_VIC1(20)
+#define IRQ_IIC2 		S5P_IRQ_VIC1(21)
+#define IRQ_OTG 		S5P_IRQ_VIC1(24)
+#define IRQ_MSM 		S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0 		S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1 		S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2 		S5P_IRQ_VIC1(28)
+#define IRQ_COMMRX 		S5P_IRQ_VIC1(29)
+#define IRQ_COMMTX 		S5P_IRQ_VIC1(30)
+
+/* VIC2 */
+#define IRQ_LCD0 		S5P_IRQ_VIC2(0)
+#define IRQ_LCD1 		S5P_IRQ_VIC2(1)
+#define IRQ_LCD2 		S5P_IRQ_VIC2(2)
+#define IRQ_LCD3 		S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR 		S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0 		S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1 		S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2 		S5P_IRQ_VIC2(7)
+#define IRQ_JPEG 		S5P_IRQ_VIC2(8)
+#define IRQ_3D 			S5P_IRQ_VIC2(10)
+#define IRQ_Mixer 		S5P_IRQ_VIC2(11)
+#define IRQ_MFC 		S5P_IRQ_VIC2(14)
+#define IRQ_TVENC 		S5P_IRQ_VIC2(15)
+#define IRQ_I2S0 		S5P_IRQ_VIC2(16)
+#define IRQ_I2S1 		S5P_IRQ_VIC2(17)
+#define IRQ_RP 			S5P_IRQ_VIC2(19)
+#define IRQ_PCM0 		S5P_IRQ_VIC2(20)
+#define IRQ_PCM1 		S5P_IRQ_VIC2(21)
+#define IRQ_ADC 		S5P_IRQ_VIC2(23)
+#define IRQ_PENDN 		S5P_IRQ_VIC2(24)
+#define IRQ_KEYPAD 		S5P_IRQ_VIC2(25)
+#define IRQ_SSS_INT 		S5P_IRQ_VIC2(27)
+#define IRQ_SSS_HASH 		S5P_IRQ_VIC2(28)
+#define IRQ_VIC_END 		S5P_IRQ_VIC2(31)
+
+#define S5P_IRQ_EINT_BASE	(IRQ_VIC_END + 1)
+
+#define IRQ_EINT(x)             ((x) < 16 ? S5P_IRQ_VIC0(x) : \
+					(S5P_IRQ_EINT_BASE + (x)-16))
+/* Set the default NR_IRQS */
+
+#define NR_IRQS 		(IRQ_EINT(31) + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
new file mode 100644
index 0000000..685277d
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -0,0 +1,58 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P6442_PA_CHIPID	(0xE0000000)
+#define S5P_PA_CHIPID		S5P6442_PA_CHIPID
+
+#define S5P6442_PA_SYSCON	(0xE0100000)
+#define S5P_PA_SYSCON		S5P6442_PA_SYSCON
+
+#define S5P6442_PA_GPIO		(0xE0200000)
+#define S5P_PA_GPIO		S5P6442_PA_GPIO
+
+#define S5P6442_PA_VIC0		(0xE4000000)
+#define S5P_PA_VIC0		S5P6442_PA_VIC0
+
+#define S5P6442_PA_VIC1		(0xE4100000)
+#define S5P_PA_VIC1		S5P6442_PA_VIC1
+
+#define S5P6442_PA_VIC2		(0xE4200000)
+#define S5P_PA_VIC2		S5P6442_PA_VIC2
+
+#define S5P6442_PA_TIMER	(0xEA000000)
+#define S5P_PA_TIMER		S5P6442_PA_TIMER
+
+#define S5P6442_PA_SYSTIMER   	(0xEA100000)
+
+#define S5P6442_PA_UART		(0xEC000000)
+
+#define S5P_PA_UART0		(S5P6442_PA_UART + 0x0)
+#define S5P_PA_UART1		(S5P6442_PA_UART + 0x400)
+#define S5P_PA_UART2		(S5P6442_PA_UART + 0x800)
+#define S5P_SZ_UART		SZ_256
+
+#define S5P6442_PA_IIC0		(0xEC100000)
+
+#define S5P6442_PA_SDRAM	(0x20000000)
+#define S5P_PA_SDRAM		S5P6442_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART		S5P6442_PA_UART
+#define S3C_PA_IIC		S5P6442_PA_IIC0
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h
new file mode 100644
index 0000000..9ddd877b
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x20000000)
+#define CONSISTENT_DMA_SIZE	SZ_8M
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
new file mode 100644
index 0000000..15e8525
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ *
+ * S5P6442 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @cfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg == S3C2410_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << (1 + tcfg1);
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 0;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div) - 1;
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
new file mode 100644
index 0000000..d8360b5
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK		S5P_CLKREG(0x08)
+#define S5P_EPLL_LOCK		S5P_CLKREG(0x10)
+#define S5P_VPLL_LOCK		S5P_CLKREG(0x20)
+
+#define S5P_APLL_CON		S5P_CLKREG(0x100)
+#define S5P_MPLL_CON		S5P_CLKREG(0x108)
+#define S5P_EPLL_CON		S5P_CLKREG(0x110)
+#define S5P_VPLL_CON		S5P_CLKREG(0x120)
+
+#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
+#define S5P_CLK_SRC4		S5P_CLKREG(0x210)
+#define S5P_CLK_SRC5		S5P_CLKREG(0x214)
+#define S5P_CLK_SRC6		S5P_CLKREG(0x218)
+
+#define S5P_CLK_SRC_MASK0	S5P_CLKREG(0x280)
+#define S5P_CLK_SRC_MASK1	S5P_CLKREG(0x284)
+
+#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
+#define S5P_CLK_DIV5		S5P_CLKREG(0x314)
+#define S5P_CLK_DIV6		S5P_CLKREG(0x318)
+
+#define S5P_CLKGATE_IP3		S5P_CLKREG(0x46C)
+
+/* CLK_OUT */
+#define S5P_CLK_OUT_SHIFT	(12)
+#define S5P_CLK_OUT_MASK	(0x1F << S5P_CLK_OUT_SHIFT)
+#define S5P_CLK_OUT		S5P_CLKREG(0x500)
+
+#define S5P_CLK_DIV_STAT0	S5P_CLKREG(0x1000)
+#define S5P_CLK_DIV_STAT1	S5P_CLKREG(0x1004)
+
+#define S5P_CLK_MUX_STAT0	S5P_CLKREG(0x1100)
+#define S5P_CLK_MUX_STAT1	S5P_CLKREG(0x1104)
+
+#define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
+
+/* Register Bit definition */
+#define S5P_EPLL_EN     		(1<<31)
+#define S5P_EPLL_MASK   		0xffffffff
+#define S5P_EPLLVAL(_m, _p, _s)   	((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_APLL_SHIFT		(0)
+#define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
+#define S5P_CLKDIV0_A2M_SHIFT		(4)
+#define S5P_CLKDIV0_A2M_MASK		(0x7 << S5P_CLKDIV0_A2M_SHIFT)
+#define S5P_CLKDIV0_D0CLK_SHIFT		(16)
+#define S5P_CLKDIV0_D0CLK_MASK		(0xF << S5P_CLKDIV0_D0CLK_SHIFT)
+#define S5P_CLKDIV0_P0CLK_SHIFT		(20)
+#define S5P_CLKDIV0_P0CLK_MASK		(0x7 << S5P_CLKDIV0_P0CLK_SHIFT)
+#define S5P_CLKDIV0_D1CLK_SHIFT		(24)
+#define S5P_CLKDIV0_D1CLK_MASK		(0xF << S5P_CLKDIV0_D1CLK_SHIFT)
+#define S5P_CLKDIV0_P1CLK_SHIFT		(28)
+#define S5P_CLKDIV0_P1CLK_MASK		(0x7 << S5P_CLKDIV0_P1CLK_SHIFT)
+
+/* Clock MUX status Registers */
+#define S5P_CLK_MUX_STAT0_APLL_SHIFT	(0)
+#define S5P_CLK_MUX_STAT0_APLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_MPLL_SHIFT	(4)
+#define S5P_CLK_MUX_STAT0_MPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_EPLL_SHIFT	(8)
+#define S5P_CLK_MUX_STAT0_EPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_VPLL_SHIFT	(12)
+#define S5P_CLK_MUX_STAT0_VPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT	(16)
+#define S5P_CLK_MUX_STAT0_MUXARM_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT	(20)
+#define S5P_CLK_MUX_STAT0_MUXD0_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT	(24)
+#define S5P_CLK_MUX_STAT0_MUXD1_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT)
+#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT	(24)
+#define S5P_CLK_MUX_STAT1_D1SYNC_MASK	(0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT)
+#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT	(28)
+#define S5P_CLK_MUX_STAT1_D0SYNC_MASK	(0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-irq.h b/arch/arm/mach-s5p6442/include/mach/regs-irq.h
new file mode 100644
index 0000000..73782b5
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h
new file mode 100644
index 0000000..8bcd8ed
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/tick.h b/arch/arm/mach-s5p6442/include/mach/tick.h
new file mode 100644
index 0000000..e1d4cab
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/tick.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/tick.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * S5P6442 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s5p6442/include/mach/timex.h
similarity index 83%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s5p6442/include/mach/timex.h
index 2a425ed..ff8f2fc 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s5p6442/include/mach/timex.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* arch/arm/mach-s5p6442/include/mach/timex.h
  *
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2010 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - time parameters
+ * S5P6442 - time parameters
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,8 +19,6 @@
  * for the time conversion functions to/from jiffies is acceptable.
 */
 
-
 #define CLOCK_TICK_RATE 12000000
 
-
 #endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/uncompress.h b/arch/arm/mach-s5p6442/include/mach/uncompress.h
new file mode 100644
index 0000000..5ac7cbe
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
new file mode 100644
index 0000000..be33336
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S5P6442 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6442/init.c b/arch/arm/mach-s5p6442/init.c
new file mode 100644
index 0000000..1874bdb
--- /dev/null
+++ b/arch/arm/mach-s5p6442/init.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s5p6442/s5p6442-init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5p6442.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5p6442_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks);
+		}
+	}
+
+	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c
new file mode 100644
index 0000000..0d63371
--- /dev/null
+++ b/arch/arm/mach-s5p6442/mach-smdk6442.c
@@ -0,0 +1,91 @@
+/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5p6442.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5P6442_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5P6442_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5P6442_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5P6442_UCON_DEFAULT,
+		.ulcon		= S5P6442_ULCON_DEFAULT,
+		.ufcon		= S5P6442_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5P6442_UCON_DEFAULT,
+		.ulcon		= S5P6442_ULCON_DEFAULT,
+		.ufcon		= S5P6442_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5P6442_UCON_DEFAULT,
+		.ulcon		= S5P6442_ULCON_DEFAULT,
+		.ufcon		= S5P6442_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *smdk6442_devices[] __initdata = {
+};
+
+static void __init smdk6442_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs));
+}
+
+static void __init smdk6442_machine_init(void)
+{
+	platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices));
+}
+
+MACHINE_START(SMDK6442, "SMDK6442")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5p6442_init_irq,
+	.map_io		= smdk6442_map_io,
+	.init_machine	= smdk6442_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
deleted file mode 100644
index ad28d8e..0000000
--- a/arch/arm/mach-s5pc100/include/mach/gpio-core.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO core support
- *
- * Based on mach-s3c6400/include/mach/gpio-core.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-/* currently we just include the platform support */
-#include <plat/gpio-core.h>
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s5pc100/include/mach/io.h
similarity index 72%
copy from arch/arm/plat-s3c/include/mach/io.h
copy to arch/arm/mach-s5pc100/include/mach/io.h
index f6a5363..819acf5 100644
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ b/arch/arm/mach-s5pc100/include/mach/io.h
@@ -1,9 +1,9 @@
-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s5pc100/include/mach/io.h
  *
  * Copyright 2008 Simtec Electronics
  *	Ben Dooks <ben-linux@fluff.org>
  *
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S5PC100 systems
  */
 
 #ifndef __ASM_ARM_ARCH_IO_H
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
index d3de0f3..f338c9e 100644
--- a/arch/arm/mach-s5pc100/include/mach/tick.h
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -21,7 +21,7 @@
 static inline u32 s3c24xx_ostimer_pending(void)
 {
 	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
-	return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+	return pend & 1 << (IRQ_TIMER4_VIC - S5PC1XX_IRQ_VIC0(0));
 }
 
 #define TICK_MAX	(0xffffffff)
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h
similarity index 89%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s5pc100/include/mach/timex.h
index 2a425ed..47ffb17 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s5pc100/include/mach/timex.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* arch/arm/mach-s5pc100/include/mach/timex.h
  *
  * Copyright (c) 2003-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - time parameters
+ * S3C6400 - time parameters
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,8 +19,6 @@
  * for the time conversion functions to/from jiffies is acceptable.
 */
 
-
 #define CLOCK_TICK_RATE 12000000
 
-
 #endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
new file mode 100644
index 0000000..be9df79
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5pc100/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xe0000000UL)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index 4385986..ea7ff19 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -28,8 +28,8 @@
 char *s5pc100_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",
 	[1] = "hsmmc",
-	/* [2] = "mmc_bus", not yet succesfuuly used yet */
-	/* [3] = "48m", - note not succesfully used yet */
+	/* [2] = "mmc_bus", not yet successfully used yet */
+	/* [3] = "48m", - note not successfully used yet */
 };
 
 
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
new file mode 100644
index 0000000..af33a1a
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -0,0 +1,40 @@
+# arch/arm/mach-s5pv210/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PV210/S5PC110
+
+if ARCH_S5PV210
+
+config CPU_S5PV210
+	bool
+	select PLAT_S5P
+	help
+	  Enable S5PV210 CPU support
+
+choice
+	prompt "Select machine type"
+	depends on ARCH_S5PV210
+	default MACH_SMDKV210
+
+config MACH_SMDKV210
+	bool "SMDKV210"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	help
+	  Machine support for Samsung SMDKV210
+
+config MACH_SMDKC110
+	bool "SMDKC110"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	help
+	  Machine support for Samsung SMDKC110
+	  S5PC110(MCP) is one of package option of S5PV210
+
+endchoice
+
+endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
new file mode 100644
index 0000000..8ebf51c
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -0,0 +1,20 @@
+# arch/arm/mach-s5pv210/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5PV210 system
+
+obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDKV210)	+= mach-smdkv210.o
+obj-$(CONFIG_MACH_SMDKC110)	+= mach-smdkc110.o
diff --git a/arch/arm/mach-s5pv210/Makefile.boot b/arch/arm/mach-s5pv210/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
new file mode 100644
index 0000000..ccccae2
--- /dev/null
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -0,0 +1,454 @@
+/* linux/arch/arm/mach-s5pv210/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5pv210.h>
+
+static int s5pv210_clk_ip0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
+}
+
+static int s5pv210_clk_ip1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP1, clk, enable);
+}
+
+static int s5pv210_clk_ip2_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP2, clk, enable);
+}
+
+static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
+}
+
+static struct clk clk_h200 = {
+	.name		= "hclk200",
+	.id		= -1,
+};
+
+static struct clk clk_h100 = {
+	.name		= "hclk100",
+	.id		= -1,
+};
+
+static struct clk clk_h166 = {
+	.name		= "hclk166",
+	.id		= -1,
+};
+
+static struct clk clk_h133 = {
+	.name		= "hclk133",
+	.id		= -1,
+};
+
+static struct clk clk_p100 = {
+	.name		= "pclk100",
+	.id		= -1,
+};
+
+static struct clk clk_p83 = {
+	.name		= "pclk83",
+	.id		= -1,
+};
+
+static struct clk clk_p66 = {
+	.name		= "pclk66",
+	.id		= -1,
+};
+
+static struct clk *sys_clks[] = {
+	&clk_h200,
+	&clk_h100,
+	&clk_h166,
+	&clk_h133,
+	&clk_p100,
+	&clk_p83,
+	&clk_p66
+};
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "rot",
+		.id		= -1,
+		.parent		= &clk_h166,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1<<29),
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1<<16),
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1<<17),
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h166,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1<<0),
+	}, {
+		.name		= "cfcon",
+		.id		= 0,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1<<25),
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip2_ctrl,
+		.ctrlbit	= (1<<16),
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip2_ctrl,
+		.ctrlbit	= (1<<17),
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip2_ctrl,
+		.ctrlbit	= (1<<18),
+	}, {
+		.name		= "hsmmc",
+		.id		= 3,
+		.parent		= &clk_h133,
+		.enable		= s5pv210_clk_ip2_ctrl,
+		.ctrlbit	= (1<<19),
+	}, {
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<16),
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<22),
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<15),
+	}, {
+		.name		= "i2c",
+		.id		= 0,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<7),
+	}, {
+		.name		= "i2c",
+		.id		= 1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<8),
+	}, {
+		.name		= "i2c",
+		.id		= 2,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<9),
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<12),
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<13),
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<14),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<23),
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<24),
+	}, {
+		.name		= "keypad",
+		.id		= -1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<21),
+	}, {
+		.name		= "i2s_v50",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<4),
+	}, {
+		.name		= "i2s_v32",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<4),
+	}, {
+		.name		= "i2s_v32",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<4),
+	}
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<7),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<8),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<9),
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p66,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<10),
+	},
+};
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_apll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_epll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_mpll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_uart_list[] = {
+	[6] = &clk_mout_mpll.clk,
+	[7] = &clk_mout_epll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit	= (1<<17),
+			.enable		= s5pv210_clk_ip3_ctrl,
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+	}
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+};
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s5pv210_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long armclk;
+	unsigned long hclk200;
+	unsigned long hclk166;
+	unsigned long hclk133;
+	unsigned long pclk100;
+	unsigned long pclk83;
+	unsigned long pclk66;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned int ptr;
+	u32 clkdiv0, clkdiv1;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	clkdiv0 = __raw_readl(S5P_CLK_DIV0);
+	clkdiv1 = __raw_readl(S5P_CLK_DIV1);
+
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+				__func__, clkdiv0, clkdiv1);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+
+	printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld",
+			apll, mpll, epll);
+
+	armclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_APLL);
+	if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX200_MASK)
+		hclk200 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200);
+	else
+		hclk200 = armclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200);
+
+	if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX166_MASK) {
+		hclk166 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M);
+		hclk166 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166);
+	} else
+		hclk166 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166);
+
+	if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX133_MASK) {
+		hclk133 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M);
+		hclk133 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133);
+	} else
+		hclk133 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133);
+
+	pclk100 = hclk200 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK100);
+	pclk83 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK83);
+	pclk66 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK66);
+
+	printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld, \
+			HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
+	       armclk, hclk200, hclk166, hclk133, pclk100, pclk83, pclk66);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+
+	clk_f.rate = armclk;
+	clk_h.rate = hclk133;
+	clk_p.rate = pclk66;
+	clk_p66.rate = pclk66;
+	clk_p83.rate = pclk83;
+	clk_h133.rate = hclk133;
+	clk_h166.rate = hclk166;
+	clk_h200.rate = hclk200;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s3c_set_clksrc(init_parents[ptr], true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_mout_epll.clk,
+	&clk_mout_mpll.clk,
+};
+
+void __init s5pv210_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register %u clocks\n", ret);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	ret = s3c24xx_register_clocks(sys_clks, ARRAY_SIZE(sys_clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register system clocks\n");
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
new file mode 100644
index 0000000..0e0f8fd
--- /dev/null
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -0,0 +1,126 @@
+/* linux/arch/arm/mach-s5pv210/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5pv210.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pv210_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
+		.pfn		= __phys_to_pfn(S5PV210_PA_SYSTIMER),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC2,
+		.pfn		= __phys_to_pfn(S5PV210_PA_VIC2),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC3,
+		.pfn		= __phys_to_pfn(S5PV210_PA_VIC3),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(S5PV210_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}
+};
+
+static void s5pv210_idle(void)
+{
+	if (!need_resched())
+		cpu_do_idle();
+
+	local_irq_enable();
+}
+
+/* s5pv210_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pv210_map_io(void)
+{
+	iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+}
+
+void __init s5pv210_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5pv210_register_clocks();
+	s5pv210_setup_clocks();
+}
+
+void __init s5pv210_init_irq(void)
+{
+	u32 vic[4];	/* S5PV210 supports 4 VIC */
+
+	/* All the VICs are fully populated. */
+	vic[0] = ~0;
+	vic[1] = ~0;
+	vic[2] = ~0;
+	vic[3] = ~0;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct sysdev_class s5pv210_sysclass = {
+	.name	= "s5pv210-core",
+};
+
+static struct sys_device s5pv210_sysdev = {
+	.cls	= &s5pv210_sysclass,
+};
+
+static int __init s5pv210_core_init(void)
+{
+	return sysdev_class_register(&s5pv210_sysclass);
+}
+
+core_initcall(s5pv210_core_init);
+
+int __init s5pv210_init(void)
+{
+	printk(KERN_INFO "S5PV210: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5pv210_idle;
+
+	return sysdev_register(&s5pv210_sysdev);
+}
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
similarity index 75%
copy from arch/arm/mach-s3c6400/include/mach/debug-macro.S
copy to arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 5c88875..7872f5c 100644
--- a/arch/arm/mach-s3c6400/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
+/* linux/arch/arm/mach-s5pv210/include/mach/debug-macro.S
  *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -25,12 +25,15 @@
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+		ldrne	\rx, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
 		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
 /* include the reset of the code which will do the work, we're only
  * compiling for a single cpu processor type so the default of s3c2440
  * will be fine with us.
diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
new file mode 100644
index 0000000..3aa41ac
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S5P_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic2
+	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic3
+	addeq	\tmp, \base, #(VA_VIC3 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
new file mode 100644
index 0000000..533b020
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -0,0 +1,129 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PV210_GPIO_A0_NR	(8)
+#define S5PV210_GPIO_A1_NR	(4)
+#define S5PV210_GPIO_B_NR	(8)
+#define S5PV210_GPIO_C0_NR	(5)
+#define S5PV210_GPIO_C1_NR	(5)
+#define S5PV210_GPIO_D0_NR	(4)
+#define S5PV210_GPIO_D1_NR	(6)
+#define S5PV210_GPIO_E0_NR	(8)
+#define S5PV210_GPIO_E1_NR	(5)
+#define S5PV210_GPIO_F0_NR	(8)
+#define S5PV210_GPIO_F1_NR	(8)
+#define S5PV210_GPIO_F2_NR	(8)
+#define S5PV210_GPIO_F3_NR	(6)
+#define S5PV210_GPIO_G0_NR	(7)
+#define S5PV210_GPIO_G1_NR	(7)
+#define S5PV210_GPIO_G2_NR	(7)
+#define S5PV210_GPIO_G3_NR	(7)
+#define S5PV210_GPIO_H0_NR	(8)
+#define S5PV210_GPIO_H1_NR	(8)
+#define S5PV210_GPIO_H2_NR	(8)
+#define S5PV210_GPIO_H3_NR	(8)
+#define S5PV210_GPIO_I_NR	(7)
+#define S5PV210_GPIO_J0_NR	(8)
+#define S5PV210_GPIO_J1_NR	(6)
+#define S5PV210_GPIO_J2_NR	(8)
+#define S5PV210_GPIO_J3_NR	(8)
+#define S5PV210_GPIO_J4_NR	(5)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PV210_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+	S5PV210_GPIO_A0_START	= 0,
+	S5PV210_GPIO_A1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_A0),
+	S5PV210_GPIO_B_START 	= S5PV210_GPIO_NEXT(S5PV210_GPIO_A1),
+	S5PV210_GPIO_C0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_B),
+	S5PV210_GPIO_C1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_C0),
+	S5PV210_GPIO_D0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_C1),
+	S5PV210_GPIO_D1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_D0),
+	S5PV210_GPIO_E0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_D1),
+	S5PV210_GPIO_E1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_E0),
+	S5PV210_GPIO_F0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_E1),
+	S5PV210_GPIO_F1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F0),
+	S5PV210_GPIO_F2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F1),
+	S5PV210_GPIO_F3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F2),
+	S5PV210_GPIO_G0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F3),
+	S5PV210_GPIO_G1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G0),
+	S5PV210_GPIO_G2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G1),
+	S5PV210_GPIO_G3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G2),
+	S5PV210_GPIO_H0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G3),
+	S5PV210_GPIO_H1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H0),
+	S5PV210_GPIO_H2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H1),
+	S5PV210_GPIO_H3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H2),
+	S5PV210_GPIO_I_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H3),
+	S5PV210_GPIO_J0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_I),
+	S5PV210_GPIO_J1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J0),
+	S5PV210_GPIO_J2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J1),
+	S5PV210_GPIO_J3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J2),
+	S5PV210_GPIO_J4_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J3),
+};
+
+/* S5PV210 GPIO number definitions */
+#define S5PV210_GPA0(_nr)	(S5PV210_GPIO_A0_START + (_nr))
+#define S5PV210_GPA1(_nr)	(S5PV210_GPIO_A1_START + (_nr))
+#define S5PV210_GPB(_nr)	(S5PV210_GPIO_B_START + (_nr))
+#define S5PV210_GPC0(_nr)	(S5PV210_GPIO_C0_START + (_nr))
+#define S5PV210_GPC1(_nr)	(S5PV210_GPIO_C1_START + (_nr))
+#define S5PV210_GPD0(_nr)	(S5PV210_GPIO_D0_START + (_nr))
+#define S5PV210_GPD1(_nr)	(S5PV210_GPIO_D1_START + (_nr))
+#define S5PV210_GPE0(_nr)	(S5PV210_GPIO_E0_START + (_nr))
+#define S5PV210_GPE1(_nr)	(S5PV210_GPIO_E1_START + (_nr))
+#define S5PV210_GPF0(_nr)	(S5PV210_GPIO_F0_START + (_nr))
+#define S5PV210_GPF1(_nr)	(S5PV210_GPIO_F1_START + (_nr))
+#define S5PV210_GPF2(_nr)	(S5PV210_GPIO_F2_START + (_nr))
+#define S5PV210_GPF3(_nr)	(S5PV210_GPIO_F3_START + (_nr))
+#define S5PV210_GPG0(_nr)	(S5PV210_GPIO_G0_START + (_nr))
+#define S5PV210_GPG1(_nr)	(S5PV210_GPIO_G1_START + (_nr))
+#define S5PV210_GPG2(_nr)	(S5PV210_GPIO_G2_START + (_nr))
+#define S5PV210_GPG3(_nr)	(S5PV210_GPIO_G3_START + (_nr))
+#define S5PV210_GPH0(_nr)	(S5PV210_GPIO_H0_START + (_nr))
+#define S5PV210_GPH1(_nr)	(S5PV210_GPIO_H1_START + (_nr))
+#define S5PV210_GPH2(_nr)	(S5PV210_GPIO_H2_START + (_nr))
+#define S5PV210_GPH3(_nr)	(S5PV210_GPIO_H3_START + (_nr))
+#define S5PV210_GPI(_nr)	(S5PV210_GPIO_I_START + (_nr))
+#define S5PV210_GPJ0(_nr)	(S5PV210_GPIO_J0_START + (_nr))
+#define S5PV210_GPJ1(_nr)	(S5PV210_GPIO_J1_START + (_nr))
+#define S5PV210_GPJ2(_nr)	(S5PV210_GPIO_J2_START + (_nr))
+#define S5PV210_GPJ3(_nr)	(S5PV210_GPIO_J3_START + (_nr))
+#define S5PV210_GPJ4(_nr)	(S5PV210_GPIO_J4_START + (_nr))
+
+/* the end of the S5PV210 specific gpios */
+#define S5PV210_GPIO_END	(S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1)
+#define S3C_GPIO_END		S5PV210_GPIO_END
+
+/* define the number of gpios we need to the one after the GPJ4() range */
+#define ARCH_NR_GPIOS		(S5PV210_GPJ4(S5PV210_GPIO_J4_NR) +	\
+				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/hardware.h b/arch/arm/mach-s5pv210/include/mach/hardware.h
new file mode 100644
index 0000000..fada7a3
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/io.h b/arch/arm/mach-s5pv210/include/mach/io.h
new file mode 100644
index 0000000..5ab9d56
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/io.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/io.h
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Default IO routines for S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H __FILE__
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
new file mode 100644
index 0000000..62c5175
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -0,0 +1,146 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/irqs.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0: System, DMA, Timer */
+
+#define IRQ_EINT0		S5P_IRQ_VIC0(0)
+#define IRQ_EINT1		S5P_IRQ_VIC0(1)
+#define IRQ_EINT2		S5P_IRQ_VIC0(2)
+#define IRQ_EINT3		S5P_IRQ_VIC0(3)
+#define IRQ_EINT4		S5P_IRQ_VIC0(4)
+#define IRQ_EINT5		S5P_IRQ_VIC0(5)
+#define IRQ_EINT6		S5P_IRQ_VIC0(6)
+#define IRQ_EINT7		S5P_IRQ_VIC0(7)
+#define IRQ_EINT8		S5P_IRQ_VIC0(8)
+#define IRQ_EINT9		S5P_IRQ_VIC0(9)
+#define IRQ_EINT10		S5P_IRQ_VIC0(10)
+#define IRQ_EINT11		S5P_IRQ_VIC0(11)
+#define IRQ_EINT12		S5P_IRQ_VIC0(12)
+#define IRQ_EINT13		S5P_IRQ_VIC0(13)
+#define IRQ_EINT14		S5P_IRQ_VIC0(14)
+#define IRQ_EINT15		S5P_IRQ_VIC0(15)
+#define IRQ_EINT16_31		S5P_IRQ_VIC0(16)
+#define IRQ_BATF		S5P_IRQ_VIC0(17)
+#define IRQ_MDMA		S5P_IRQ_VIC0(18)
+#define IRQ_PDMA0		S5P_IRQ_VIC0(19)
+#define IRQ_PDMA1		S5P_IRQ_VIC0(20)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
+#define IRQ_WDT			S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
+#define IRQ_FIMC3		S5P_IRQ_VIC0(31)
+
+/* VIC1: ARM, Power, Memory, Connectivity, Storage */
+
+#define IRQ_CORTEX0		S5P_IRQ_VIC1(0)
+#define IRQ_CORTEX1		S5P_IRQ_VIC1(1)
+#define IRQ_CORTEX2		S5P_IRQ_VIC1(2)
+#define IRQ_CORTEX3		S5P_IRQ_VIC1(3)
+#define IRQ_CORTEX4		S5P_IRQ_VIC1(4)
+#define IRQ_IEMAPC		S5P_IRQ_VIC1(5)
+#define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
+#define IRQ_ONENAND		S5P_IRQ_VIC1(7)
+#define IRQ_NFC			S5P_IRQ_VIC1(8)
+#define IRQ_CFC			S5P_IRQ_VIC1(9)
+#define IRQ_UART0		S5P_IRQ_VIC1(10)
+#define IRQ_UART1		S5P_IRQ_VIC1(11)
+#define IRQ_UART2		S5P_IRQ_VIC1(12)
+#define IRQ_UART3		S5P_IRQ_VIC1(13)
+#define IRQ_IIC			S5P_IRQ_VIC1(14)
+#define IRQ_SPI0		S5P_IRQ_VIC1(15)
+#define IRQ_SPI1		S5P_IRQ_VIC1(16)
+#define IRQ_SPI2		S5P_IRQ_VIC1(17)
+#define IRQ_IRDA		S5P_IRQ_VIC1(18)
+#define IRQ_CAN0		S5P_IRQ_VIC1(19)
+#define IRQ_CAN1		S5P_IRQ_VIC1(20)
+#define IRQ_HSIRX		S5P_IRQ_VIC1(21)
+#define IRQ_HSITX		S5P_IRQ_VIC1(22)
+#define IRQ_UHOST		S5P_IRQ_VIC1(23)
+#define IRQ_OTG			S5P_IRQ_VIC1(24)
+#define IRQ_MSM			S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0		S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1		S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2		S5P_IRQ_VIC1(28)
+#define IRQ_MIPICSI		S5P_IRQ_VIC1(29)
+#define IRQ_MIPIDSI		S5P_IRQ_VIC1(30)
+#define IRQ_ONENAND_AUDI	S5P_IRQ_VIC1(31)
+
+/* VIC2: Multimedia, Audio, Security */
+
+#define IRQ_LCD0		S5P_IRQ_VIC2(0)
+#define IRQ_LCD1		S5P_IRQ_VIC2(1)
+#define IRQ_LCD2		S5P_IRQ_VIC2(2)
+#define IRQ_LCD3		S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR		S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0		S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1		S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2		S5P_IRQ_VIC2(7)
+#define IRQ_JPEG		S5P_IRQ_VIC2(8)
+#define IRQ_2D			S5P_IRQ_VIC2(9)
+#define IRQ_3D			S5P_IRQ_VIC2(10)
+#define IRQ_MIXER		S5P_IRQ_VIC2(11)
+#define IRQ_HDMI		S5P_IRQ_VIC2(12)
+#define IRQ_IIC1		S5P_IRQ_VIC2(13)
+#define IRQ_MFC			S5P_IRQ_VIC2(14)
+#define IRQ_TVENC		S5P_IRQ_VIC2(15)
+#define IRQ_I2S0		S5P_IRQ_VIC2(16)
+#define IRQ_I2S1		S5P_IRQ_VIC2(17)
+#define IRQ_I2S2		S5P_IRQ_VIC2(18)
+#define IRQ_AC97		S5P_IRQ_VIC2(19)
+#define IRQ_PCM0		S5P_IRQ_VIC2(20)
+#define IRQ_PCM1		S5P_IRQ_VIC2(21)
+#define IRQ_SPDIF		S5P_IRQ_VIC2(22)
+#define IRQ_ADC			S5P_IRQ_VIC2(23)
+#define IRQ_PENDN		S5P_IRQ_VIC2(24)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_KEYPAD		S5P_IRQ_VIC2(25)
+#define IRQ_CG			S5P_IRQ_VIC2(26)
+#define IRQ_SEC			S5P_IRQ_VIC2(27)
+#define IRQ_SECRX		S5P_IRQ_VIC2(28)
+#define IRQ_SECTX		S5P_IRQ_VIC2(29)
+#define IRQ_SDMIRQ		S5P_IRQ_VIC2(30)
+#define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
+
+/* VIC3: Etc */
+
+#define IRQ_IPC			S5P_IRQ_VIC3(0)
+#define IRQ_HOSTIF		S5P_IRQ_VIC3(1)
+#define IRQ_MMC3		S5P_IRQ_VIC3(2)
+#define IRQ_CEC			S5P_IRQ_VIC3(3)
+#define IRQ_TSI			S5P_IRQ_VIC3(4)
+#define IRQ_MDNIE0		S5P_IRQ_VIC3(5)
+#define IRQ_MDNIE1		S5P_IRQ_VIC3(6)
+#define IRQ_MDNIE2		S5P_IRQ_VIC3(7)
+#define IRQ_MDNIE3		S5P_IRQ_VIC3(8)
+#define IRQ_VIC_END		S5P_IRQ_VIC3(31)
+
+#define S5P_IRQ_EINT_BASE	(IRQ_VIC_END + 1)
+
+#define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S5P_EINT(x)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS 		(IRQ_EINT(31) + 1)
+
+#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
new file mode 100644
index 0000000..c22694c
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5PV210_PA_CHIPID	(0xE0000000)
+#define S5P_PA_CHIPID		S5PV210_PA_CHIPID
+
+#define S5PV210_PA_SYSCON	(0xE0100000)
+#define S5P_PA_SYSCON		S5PV210_PA_SYSCON
+
+#define S5PV210_PA_GPIO		(0xE0200000)
+#define S5P_PA_GPIO		S5PV210_PA_GPIO
+
+#define S5PV210_PA_IIC0		(0xE1800000)
+
+#define S5PV210_PA_TIMER	(0xE2500000)
+#define S5P_PA_TIMER		S5PV210_PA_TIMER
+
+#define S5PV210_PA_SYSTIMER	(0xE2600000)
+
+#define S5PV210_PA_UART		(0xE2900000)
+
+#define S5P_PA_UART0		(S5PV210_PA_UART + 0x0)
+#define S5P_PA_UART1		(S5PV210_PA_UART + 0x400)
+#define S5P_PA_UART2		(S5PV210_PA_UART + 0x800)
+#define S5P_PA_UART3		(S5PV210_PA_UART + 0xC00)
+
+#define S5P_SZ_UART		SZ_256
+
+#define S5PV210_PA_SROMC	(0xE8000000)
+
+#define S5PV210_PA_VIC0		(0xF2000000)
+#define S5P_PA_VIC0		S5PV210_PA_VIC0
+
+#define S5PV210_PA_VIC1		(0xF2100000)
+#define S5P_PA_VIC1		S5PV210_PA_VIC1
+
+#define S5PV210_PA_VIC2		(0xF2200000)
+#define S5P_PA_VIC2		S5PV210_PA_VIC2
+
+#define S5PV210_PA_VIC3		(0xF2300000)
+#define S5P_PA_VIC3		S5PV210_PA_VIC3
+
+#define S5PV210_PA_SDRAM	(0x20000000)
+#define S5P_PA_SDRAM		S5PV210_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART		S5PV210_PA_UART
+#define S3C_PA_IIC		S5PV210_PA_IIC0
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
new file mode 100644
index 0000000..379117e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -0,0 +1,23 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x20000000)
+#define CONSISTENT_DMA_SIZE	(SZ_8M + SZ_4M + SZ_2M)
+
+/* Maximum of 256MiB in one bank */
+#define MAX_PHYSMEM_BITS	32
+#define SECTION_SIZE_BITS	28
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
new file mode 100644
index 0000000..69027fe
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ *
+ * S5PV210 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @cfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg == S3C2410_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << (1 + tcfg1);
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 0;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div) - 1;
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
new file mode 100644
index 0000000..e56e0e4
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -0,0 +1,169 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK		S5P_CLKREG(0x08)
+#define S5P_EPLL_LOCK		S5P_CLKREG(0x10)
+#define S5P_VPLL_LOCK		S5P_CLKREG(0x20)
+
+#define S5P_APLL_CON		S5P_CLKREG(0x100)
+#define S5P_MPLL_CON		S5P_CLKREG(0x108)
+#define S5P_EPLL_CON		S5P_CLKREG(0x110)
+#define S5P_VPLL_CON		S5P_CLKREG(0x120)
+
+#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
+#define S5P_CLK_SRC4		S5P_CLKREG(0x210)
+#define S5P_CLK_SRC5		S5P_CLKREG(0x214)
+#define S5P_CLK_SRC6		S5P_CLKREG(0x218)
+
+#define S5P_CLK_SRC_MASK0	S5P_CLKREG(0x280)
+#define S5P_CLK_SRC_MASK1	S5P_CLKREG(0x284)
+
+#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
+#define S5P_CLK_DIV5		S5P_CLKREG(0x314)
+#define S5P_CLK_DIV6		S5P_CLKREG(0x318)
+#define S5P_CLK_DIV7		S5P_CLKREG(0x31C)
+
+#define S5P_CLKGATE_MAIN0	S5P_CLKREG(0x400)
+#define S5P_CLKGATE_MAIN1	S5P_CLKREG(0x404)
+#define S5P_CLKGATE_MAIN2	S5P_CLKREG(0x408)
+
+#define S5P_CLKGATE_PERI0	S5P_CLKREG(0x420)
+#define S5P_CLKGATE_PERI1	S5P_CLKREG(0x424)
+
+#define S5P_CLKGATE_SCLK0	S5P_CLKREG(0x440)
+#define S5P_CLKGATE_SCLK1	S5P_CLKREG(0x444)
+#define S5P_CLKGATE_IP0		S5P_CLKREG(0x460)
+#define S5P_CLKGATE_IP1		S5P_CLKREG(0x464)
+#define S5P_CLKGATE_IP2		S5P_CLKREG(0x468)
+#define S5P_CLKGATE_IP3		S5P_CLKREG(0x46C)
+#define S5P_CLKGATE_IP4		S5P_CLKREG(0x470)
+
+#define S5P_CLKGATE_BLOCK	S5P_CLKREG(0x480)
+#define S5P_CLKGATE_BUS0	S5P_CLKREG(0x484)
+#define S5P_CLKGATE_BUS1	S5P_CLKREG(0x488)
+#define S5P_CLK_OUT		S5P_CLKREG(0x500)
+
+/* CLKSRC0 */
+#define S5P_CLKSRC0_MUX200_MASK		(0x1<<16)
+#define S5P_CLKSRC0_MUX166_MASK		(0x1<<20)
+#define S5P_CLKSRC0_MUX133_MASK		(0x1<<24)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_APLL_SHIFT		(0)
+#define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
+#define S5P_CLKDIV0_A2M_SHIFT		(4)
+#define S5P_CLKDIV0_A2M_MASK		(0x7 << S5P_CLKDIV0_A2M_SHIFT)
+#define S5P_CLKDIV0_HCLK200_SHIFT	(8)
+#define S5P_CLKDIV0_HCLK200_MASK	(0x7 << S5P_CLKDIV0_HCLK200_SHIFT)
+#define S5P_CLKDIV0_PCLK100_SHIFT	(12)
+#define S5P_CLKDIV0_PCLK100_MASK	(0x7 << S5P_CLKDIV0_PCLK100_SHIFT)
+#define S5P_CLKDIV0_HCLK166_SHIFT	(16)
+#define S5P_CLKDIV0_HCLK166_MASK	(0xF << S5P_CLKDIV0_HCLK166_SHIFT)
+#define S5P_CLKDIV0_PCLK83_SHIFT	(20)
+#define S5P_CLKDIV0_PCLK83_MASK		(0x7 << S5P_CLKDIV0_PCLK83_SHIFT)
+#define S5P_CLKDIV0_HCLK133_SHIFT	(24)
+#define S5P_CLKDIV0_HCLK133_MASK	(0xF << S5P_CLKDIV0_HCLK133_SHIFT)
+#define S5P_CLKDIV0_PCLK66_SHIFT	(28)
+#define S5P_CLKDIV0_PCLK66_MASK		(0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
+
+/* Registers related to power management */
+#define S5P_PWR_CFG		S5P_CLKREG(0xC000)
+#define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0xC004)
+#define S5P_WAKEUP_MASK 	S5P_CLKREG(0xC008)
+#define S5P_PWR_MODE		S5P_CLKREG(0xC00C)
+#define S5P_NORMAL_CFG		S5P_CLKREG(0xC010)
+#define S5P_IDLE_CFG		S5P_CLKREG(0xC020)
+#define S5P_STOP_CFG		S5P_CLKREG(0xC030)
+#define S5P_STOP_MEM_CFG	S5P_CLKREG(0xC034)
+#define S5P_SLEEP_CFG		S5P_CLKREG(0xC040)
+
+#define S5P_OSC_FREQ		S5P_CLKREG(0xC100)
+#define S5P_OSC_STABLE		S5P_CLKREG(0xC104)
+#define S5P_PWR_STABLE		S5P_CLKREG(0xC108)
+#define S5P_MTC_STABLE		S5P_CLKREG(0xC110)
+#define S5P_CLAMP_STABLE	S5P_CLKREG(0xC114)
+
+#define S5P_WAKEUP_STAT		S5P_CLKREG(0xC200)
+#define S5P_BLK_PWR_STAT	S5P_CLKREG(0xC204)
+
+#define S5P_OTHERS		S5P_CLKREG(0xE000)
+#define S5P_OM_STAT		S5P_CLKREG(0xE100)
+#define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
+#define S5P_DAC_CONTROL		S5P_CLKREG(0xE810)
+
+#define S5P_INFORM0		S5P_CLKREG(0xF000)
+#define S5P_INFORM1		S5P_CLKREG(0xF004)
+#define S5P_INFORM2		S5P_CLKREG(0xF008)
+#define S5P_INFORM3		S5P_CLKREG(0xF00C)
+#define S5P_INFORM4		S5P_CLKREG(0xF010)
+#define S5P_INFORM5		S5P_CLKREG(0xF014)
+#define S5P_INFORM6		S5P_CLKREG(0xF018)
+#define S5P_INFORM7		S5P_CLKREG(0xF01C)
+
+#define S5P_RST_STAT		S5P_CLKREG(0xA000)
+#define S5P_OSC_CON		S5P_CLKREG(0x8000)
+#define S5P_MIPI_PHY_CON0	S5P_CLKREG(0x7200)
+#define S5P_MIPI_PHY_CON1	S5P_CLKREG(0x7204)
+#define S5P_MIPI_CONTROL	S5P_CLKREG(0xE814)
+
+#define S5P_IDLE_CFG_TL_MASK	(3 << 30)
+#define S5P_IDLE_CFG_TM_MASK	(3 << 28)
+#define S5P_IDLE_CFG_TL_ON	(2 << 30)
+#define S5P_IDLE_CFG_TM_ON	(2 << 28)
+#define S5P_IDLE_CFG_DIDLE	(1 << 0)
+
+#define S5P_CFG_WFI_CLEAN		(~(3 << 8))
+#define S5P_CFG_WFI_IDLE		(1 << 8)
+#define S5P_CFG_WFI_STOP		(2 << 8)
+#define S5P_CFG_WFI_SLEEP		(3 << 8)
+
+#define S5P_OTHER_SYS_INT		24
+#define S5P_OTHER_STA_TYPE		23
+#define S5P_OTHER_SYSC_INTOFF		(1 << 0)
+#define STA_TYPE_EXPON			0
+#define STA_TYPE_SFR			1
+
+#define S5P_PWR_STA_EXP_SCALE		0
+#define S5P_PWR_STA_CNT			4
+
+#define S5P_PWR_STABLE_COUNT		85500
+
+#define S5P_SLEEP_CFG_OSC_EN		(1 << 0)
+#define S5P_SLEEP_CFG_USBOSC_EN		(1 << 1)
+
+/* OTHERS Resgister */
+#define S5P_OTHERS_USB_SIG_MASK		(1 << 16)
+#define S5P_OTHERS_MIPI_DPHY_EN		(1 << 28)
+
+/* MIPI */
+#define S5P_MIPI_DPHY_EN		(3)
+
+/* S5P_DAC_CONTROL */
+#define S5P_DAC_ENABLE			(1)
+#define S5P_DAC_DISABLE			(0)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
new file mode 100644
index 0000000..5c3b104
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
new file mode 100644
index 0000000..1ca04d5
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/tick.h b/arch/arm/mach-s5pv210/include/mach/tick.h
new file mode 100644
index 0000000..7993b36
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/tick.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/tick.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * S5PV210 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h
similarity index 66%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s5pv210/include/mach/timex.h
index 2a425ed..73dc854 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s5pv210/include/mach/timex.h
@@ -1,9 +1,14 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* linux/arch/arm/mach-s5pv210/include/mach/timex.h
  *
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2010 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - time parameters
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/timex.h
+ *
+ * S5PV210 - time parameters
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,7 +16,7 @@
 */
 
 #ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H __FILE__
 
 /* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
  * a variable is useless. It seems as long as we make our timers an
@@ -19,8 +24,6 @@
  * for the time conversion functions to/from jiffies is acceptable.
 */
 
-
 #define CLOCK_TICK_RATE 12000000
 
-
 #endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/uncompress.h b/arch/arm/mach-s5pv210/include/mach/uncompress.h
new file mode 100644
index 0000000..08ff2fd
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
new file mode 100644
index 0000000..58f515e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * S5PV210 vmalloc definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H __FILE__
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv210/init.c b/arch/arm/mach-s5pv210/init.c
new file mode 100644
index 0000000..4865ae2
--- /dev/null
+++ b/arch/arm/mach-s5pv210/init.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s5pv210/init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pv210.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5pv210_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks);
+		}
+	}
+
+	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
new file mode 100644
index 0000000..ab4869d
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5pv210/mach-smdkc110.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *smdkc110_devices[] __initdata = {
+};
+
+static void __init smdkc110_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init smdkc110_machine_init(void)
+{
+	platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
+}
+
+MACHINE_START(SMDKC110, "SMDKC110")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= smdkc110_map_io,
+	.init_machine	= smdkc110_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
new file mode 100644
index 0000000..a278832
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5pv210/mach-smdkv210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *smdkv210_devices[] __initdata = {
+};
+
+static void __init smdkv210_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init smdkv210_machine_init(void)
+{
+	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
+}
+
+MACHINE_START(SMDKV210, "SMDKV210")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= smdkv210_map_io,
+	.init_machine	= smdkv210_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 051ec0f..259cb2c 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -51,6 +51,10 @@
 	},
 };
 
+static struct sa1111_platform_data sa1111_info = {
+	.irq_base	= IRQ_BOARD_END,
+};
+
 static u64 sa1111_dmamask = 0xffffffffUL;
 
 static struct platform_device sa1111_device = {
@@ -59,6 +63,7 @@
 	.dev		= {
 		.dma_mask = &sa1111_dmamask,
 		.coherent_dma_mask = 0xffffffff,
+		.platform_data = &sa1111_info,
 	},
 	.num_resources	= ARRAY_SIZE(sa1111_resources),
 	.resource	= sa1111_resources,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 9982c5c..5d5f330 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -234,6 +234,10 @@
 	},
 };
 
+static struct locomo_platform_data locomo_info = {
+	.irq_base	= IRQ_BOARD_START,
+};
+
 struct platform_device collie_locomo_device = {
 	.name		= "locomo",
 	.id		= 0,
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 71a0b3f..52acda7 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -72,13 +72,6 @@
 #define COLLIE_IRQ_GPIO_GA_INT		IRQ_GPIO25
 #define COLLIE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO26
 
-#define COLLIE_LCM_IRQ_GPIO_RTS		IRQ_LOCOMO_GPIO0
-#define COLLIE_LCM_IRQ_GPIO_CTS		IRQ_LOCOMO_GPIO1
-#define COLLIE_LCM_IRQ_GPIO_DSR		IRQ_LOCOMO_GPIO2
-#define COLLIE_LCM_IRQ_GPIO_DTR		IRQ_LOCOMO_GPIO3
-#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT	IRQ_LOCOMO_GPIO13
-#define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
-
 /* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
 #define COLLIE_TC35143_GPIO_BASE	(GPIO_MAX + 13)
 #define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index ae81f80..8c8845b 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -68,93 +68,17 @@
 #define IRQ_BOARD_START		49
 #define IRQ_BOARD_END		65
 
-#define IRQ_SA1111_START	(IRQ_BOARD_END)
-#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
-#define SSPXMTINT		(IRQ_BOARD_END + 24)
-#define SSPRCVINT		(IRQ_BOARD_END + 25)
-#define SSPROR			(IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
-#define AUDTFSR			(IRQ_BOARD_END + 36)
-#define AUDRFSR			(IRQ_BOARD_END + 37)
-#define AUDTUR			(IRQ_BOARD_END + 38)
-#define AUDROR			(IRQ_BOARD_END + 39)
-#define AUDDTS			(IRQ_BOARD_END + 40)
-#define AUDRDD			(IRQ_BOARD_END + 41)
-#define AUDSTO			(IRQ_BOARD_END + 42)
-#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
-#define IRQ_HCIM		(IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_REND	(IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
-
 /*
  * Figure out the MAX IRQ number.
  *
  * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4
  * Otherwise, we have the standard IRQs only.
  */
 #ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#define NR_IRQS			(IRQ_BOARD_END + 55)
+#elif defined(CONFIG_SHARPSL_LOCOMO)
+#define NR_IRQS			(IRQ_BOARD_START + 4)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
 #endif
@@ -166,10 +90,3 @@
 #define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
 #define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
 #define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
-
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 13ebd2d..d3ec620 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -208,6 +208,10 @@
 	},
 };
 
+static struct sa1111_platform_data sa1111_info = {
+	.irq_base	= IRQ_BOARD_END,
+};
+
 static u64 sa1111_dmamask = 0xffffffffUL;
 
 static struct platform_device sa1111_device = {
@@ -216,6 +220,7 @@
 	.dev		= {
 		.dma_mask = &sa1111_dmamask,
 		.coherent_dma_mask = 0xffffffff,
+		.platform_data = &sa1111_info,
 	},
 	.num_resources	= ARRAY_SIZE(sa1111_resources),
 	.resource	= sa1111_resources,
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 506a5e5..9b6dee5d 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -130,7 +130,7 @@
 };
 EXPORT_SYMBOL(jornada_ssp_end);
 
-static int __init jornada_ssp_probe(struct platform_device *dev)
+static int __devinit jornada_ssp_probe(struct platform_device *dev)
 {
 	int ret;
 
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 6ccd175..0b505d9 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -241,6 +241,10 @@
 	},
 };
 
+static struct sa1111_platform_data sa1111_info = {
+	.irq_base	= IRQ_BOARD_END,
+};
+
 static u64 sa1111_dmamask = 0xffffffffUL;
 
 static struct platform_device sa1111_device = {
@@ -249,6 +253,7 @@
 	.dev		= {
 		.dma_mask = &sa1111_dmamask,
 		.coherent_dma_mask = 0xffffffff,
+		.platform_data = &sa1111_info,
 	},
 	.num_resources	= ARRAY_SIZE(sa1111_resources),
 	.resource	= sa1111_resources,
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index b9cbb56..74b6e0e 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -35,14 +35,12 @@
 static int
 sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
 {
-	unsigned long flags, next, oscr;
+	unsigned long next, oscr;
 
-	raw_local_irq_save(flags);
 	OIER |= OIER_E0;
 	next = OSCR + delta;
 	OSMR0 = next;
 	oscr = OSCR;
-	raw_local_irq_restore(flags);
 
 	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
 }
@@ -50,16 +48,12 @@
 static void
 sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
 {
-	unsigned long flags;
-
 	switch (mode) {
 	case CLOCK_EVT_MODE_ONESHOT:
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		raw_local_irq_save(flags);
 		OIER &= ~OIER_E0;
 		OSSR = OSSR_M0;
-		raw_local_irq_restore(flags);
 		break;
 
 	case CLOCK_EVT_MODE_RESUME:
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
new file mode 100644
index 0000000..aeceb9b
--- /dev/null
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -0,0 +1,84 @@
+if ARCH_SHMOBILE
+
+comment "SH-Mobile System Type"
+
+config ARCH_SH7367
+	bool "SH-Mobile G3 (SH7367)"
+	select CPU_V6
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
+config ARCH_SH7377
+	bool "SH-Mobile G4 (SH7377)"
+	select CPU_V7
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
+config ARCH_SH7372
+	bool "SH-Mobile AP4 (SH7372)"
+	select CPU_V7
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
+comment "SH-Mobile Board Type"
+
+config MACH_G3EVM
+	bool "G3EVM board"
+	depends on ARCH_SH7367
+	select ARCH_REQUIRE_GPIOLIB
+
+config MACH_G4EVM
+	bool "G4EVM board"
+	depends on ARCH_SH7377
+	select ARCH_REQUIRE_GPIOLIB
+
+config MACH_AP4EVB
+	bool "AP4EVB board"
+	depends on ARCH_SH7372
+	select ARCH_REQUIRE_GPIOLIB
+
+comment "SH-Mobile System Configuration"
+
+menu "Memory configuration"
+
+config MEMORY_START
+	hex "Physical memory start address"
+	default "0x50000000" if MACH_G3EVM
+	default "0x40000000" if MACH_G4EVM
+	default "0x40000000" if MACH_AP4EVB
+	default "0x00000000"
+	---help---
+	  Tweak this only when porting to a new machine which does not
+	  already have a defconfig. Changing it from the known correct
+	  value on any of the known systems will only lead to disaster.
+
+config MEMORY_SIZE
+	hex "Physical memory size"
+	default "0x08000000" if MACH_G3EVM
+	default "0x08000000" if MACH_G4EVM
+	default "0x10000000" if MACH_AP4EVB
+	default "0x04000000"
+	help
+	  This sets the default memory size assumed by your kernel. It can
+	  be overridden as normal by the 'mem=' argument on the kernel command
+	  line.
+
+endmenu
+
+menu "Timer and clock configuration"
+
+config SH_TIMER_CMT
+	bool "CMT timer driver"
+	default y
+	help
+	  This enables build of the CMT timer driver.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
new file mode 100644
index 0000000..6d385d3
--- /dev/null
+++ b/arch/arm/mach-shmobile/Makefile
@@ -0,0 +1,22 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common objects
+obj-y				:= timer.o console.o
+
+# CPU objects
+obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
+obj-$(CONFIG_ARCH_SH7377)	+= setup-sh7377.o clock-sh7367.o intc-sh7377.o
+obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7367.o intc-sh7372.o
+
+# Pinmux setup
+pfc-$(CONFIG_ARCH_SH7367)	:= pfc-sh7367.o
+pfc-$(CONFIG_ARCH_SH7377)	:= pfc-sh7377.o
+pfc-$(CONFIG_ARCH_SH7372)	:= pfc-sh7372.o
+obj-$(CONFIG_GENERIC_GPIO)	+= $(pfc-y)
+
+# Board objects
+obj-$(CONFIG_MACH_G3EVM)	+= board-g3evm.o
+obj-$(CONFIG_MACH_G4EVM)	+= board-g4evm.o
+obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
new file mode 100644
index 0000000..1c08ee9
--- /dev/null
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -0,0 +1,9 @@
+__ZRELADDR	:= $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_MEMORY_START) + 0x8000]')
+
+   zreladdr-y   := $(__ZRELADDR)
+
+# Unsupported legacy stuff
+#
+#params_phys-y (Instead: Pass atags pointer in r2)
+#initrd_phys-y (Instead: Use compiled-in initramfs)
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
new file mode 100644
index 0000000..a0463d9
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -0,0 +1,301 @@
+/*
+ * AP4EVB board support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <mach/common.h>
+#include <mach/sh7372.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+/*
+ * Address	Interface		BusWidth	note
+ * ------------------------------------------------------------------
+ * 0x0000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = ON
+ * 0x0800_0000	user area		-
+ * 0x1000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = OFF
+ * 0x1400_0000	Ether (LAN9220)		16bit
+ * 0x1600_0000	user area		-		cannot use with NAND
+ * 0x1800_0000	user area		-
+ * 0x1A00_0000	-
+ * 0x4000_0000	LPDDR2-SDRAM (POP)	32bit
+ */
+
+/*
+ * NOR Flash ROM
+ *
+ *  SW1  |     SW2    | SW7  | NOR Flash ROM
+ *  bit1 | bit1  bit2 | bit1 | Memory allocation
+ * ------+------------+------+------------------
+ *  OFF  | ON     OFF | ON   |    Area 0
+ *  OFF  | ON     OFF | OFF  |    Area 4
+ */
+
+/*
+ * NAND Flash ROM
+ *
+ *  SW1  |     SW2    | SW7  | NAND Flash ROM
+ *  bit1 | bit1  bit2 | bit2 | Memory allocation
+ * ------+------------+------+------------------
+ *  OFF  | ON     OFF | ON   |    FCE 0
+ *  OFF  | ON     OFF | OFF  |    FCE 1
+ */
+
+/*
+ * SMSC 9220
+ *
+ *  SW1		SMSC 9220
+ * -----------------------
+ *  ON		access disable
+ *  OFF		access enable
+ */
+
+/*
+ * KEYSC
+ *
+ * SW43		KEYSC
+ * -------------------------
+ * ON		enable
+ * OFF		disable
+ */
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel_ro",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+/* SMSC 9220 */
+static struct resource smc911x_resources[] = {
+	{
+		.start	= 0x14000000,
+		.end	= 0x16000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 6,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smc911x_device = {
+	.name           = "smsc911x",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(smc911x_resources),
+	.resource       = smc911x_resources,
+	.dev            = {
+		.platform_data = &smsc911x_info,
+	},
+};
+
+/* KEYSC (Needs SW43 set to ON) */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_1,
+	.scan_timing	= 3,
+	.delay		= 2500,
+	.keycodes = {
+		KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
+		KEY_5, KEY_6, KEY_7, KEY_8, KEY_9,
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0xe61b0000,
+		.end    = 0xe61b0063,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+static struct platform_device *ap4evb_devices[] __initdata = {
+	&nor_flash_device,
+	&smc911x_device,
+	&keysc_device,
+};
+
+static struct map_desc ap4evb_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+static void __init ap4evb_map_io(void)
+{
+	iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
+
+	/* setup early devices, clocks and console here as well */
+	sh7372_add_early_devices();
+	sh7367_clock_init(); /* use g3 clocks for now */
+	shmobile_setup_console();
+}
+
+static void __init ap4evb_init(void)
+{
+	sh7372_pinmux_init();
+
+	/* enable SCIFA0 */
+	gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
+	gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
+
+	/* enable SMSC911X */
+	gpio_request(GPIO_FN_CS5A,	NULL);
+	gpio_request(GPIO_FN_IRQ6_39,	NULL);
+
+	/* enable LED 1 - 4 */
+	gpio_request(GPIO_PORT185, NULL);
+	gpio_request(GPIO_PORT186, NULL);
+	gpio_request(GPIO_PORT187, NULL);
+	gpio_request(GPIO_PORT188, NULL);
+	gpio_direction_output(GPIO_PORT185, 1);
+	gpio_direction_output(GPIO_PORT186, 1);
+	gpio_direction_output(GPIO_PORT187, 1);
+	gpio_direction_output(GPIO_PORT188, 1);
+	gpio_export(GPIO_PORT185, 0);
+	gpio_export(GPIO_PORT186, 0);
+	gpio_export(GPIO_PORT187, 0);
+	gpio_export(GPIO_PORT188, 0);
+
+	/* enable Debug switch (S6) */
+	gpio_request(GPIO_PORT32, NULL);
+	gpio_request(GPIO_PORT33, NULL);
+	gpio_request(GPIO_PORT34, NULL);
+	gpio_request(GPIO_PORT35, NULL);
+	gpio_direction_input(GPIO_PORT32);
+	gpio_direction_input(GPIO_PORT33);
+	gpio_direction_input(GPIO_PORT34);
+	gpio_direction_input(GPIO_PORT35);
+	gpio_export(GPIO_PORT32, 0);
+	gpio_export(GPIO_PORT33, 0);
+	gpio_export(GPIO_PORT34, 0);
+	gpio_export(GPIO_PORT35, 0);
+
+	/* enable KEYSC */
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4, NULL);
+	gpio_request(GPIO_FN_KEYIN0_136, NULL);
+	gpio_request(GPIO_FN_KEYIN1_135, NULL);
+	gpio_request(GPIO_FN_KEYIN2_134, NULL);
+	gpio_request(GPIO_FN_KEYIN3_133, NULL);
+	gpio_request(GPIO_FN_KEYIN4,     NULL);
+
+	sh7372_add_standard_devices();
+
+	platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
+}
+
+MACHINE_START(AP4EVB, "ap4evb")
+	.phys_io	= 0xe6000000,
+	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
+	.map_io		= ap4evb_map_io,
+	.init_irq	= sh7372_init_irq,
+	.init_machine	= ap4evb_init,
+	.timer		= &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
new file mode 100644
index 0000000..f36c9a9
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -0,0 +1,211 @@
+/*
+ * G3EVM board support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <mach/sh7367.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel_ro",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+/* USBHS */
+void usb_host_port_power(int port, int power)
+{
+	if (!power) /* only power-on supported for now */
+		return;
+
+	/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
+	__raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+}
+
+static struct r8a66597_platdata usb_host_data = {
+	.on_chip = 1,
+	.port_power = usb_host_port_power,
+};
+
+static struct resource usb_host_resources[] = {
+	[0] = {
+		.name	= "USBHS",
+		.start	= 0xe6890000,
+		.end	= 0xe68900e5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.platform_data		= &usb_host_data,
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usb_host_resources),
+	.resource	= usb_host_resources,
+};
+
+static struct platform_device *g3evm_devices[] __initdata = {
+	&nor_flash_device,
+	&usb_host_device,
+};
+
+static struct map_desc g3evm_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+static void __init g3evm_map_io(void)
+{
+	iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
+
+	/* setup early devices, clocks and console here as well */
+	sh7367_add_early_devices();
+	sh7367_clock_init();
+	shmobile_setup_console();
+}
+
+static void __init g3evm_init(void)
+{
+	sh7367_pinmux_init();
+
+	/* Lit DS4 LED */
+	gpio_request(GPIO_PORT22, NULL);
+	gpio_direction_output(GPIO_PORT22, 1);
+	gpio_export(GPIO_PORT22, 0);
+
+	/* Lit DS8 LED */
+	gpio_request(GPIO_PORT23, NULL);
+	gpio_direction_output(GPIO_PORT23, 1);
+	gpio_export(GPIO_PORT23, 0);
+
+	/* Lit DS3 LED */
+	gpio_request(GPIO_PORT24, NULL);
+	gpio_direction_output(GPIO_PORT24, 1);
+	gpio_export(GPIO_PORT24, 0);
+
+	/* SCIFA1 */
+	gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
+	gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
+	gpio_request(GPIO_FN_SCIFA1_CTS, NULL);
+	gpio_request(GPIO_FN_SCIFA1_RTS, NULL);
+
+	/* USBHS */
+	gpio_request(GPIO_FN_VBUS0, NULL);
+	gpio_request(GPIO_FN_PWEN, NULL);
+	gpio_request(GPIO_FN_OVCN, NULL);
+	gpio_request(GPIO_FN_OVCN2, NULL);
+	gpio_request(GPIO_FN_EXTLP, NULL);
+	gpio_request(GPIO_FN_IDIN, NULL);
+
+	/* enable clock in SYMSTPCR2 */
+	__raw_writel(__raw_readl(0xe6158048) & ~(1 << 22), 0xe6158048);
+
+	/* setup USB phy */
+	__raw_writew(0x0300, 0xe605810a);	/* USBCR1 */
+	__raw_writew(0x00e0, 0xe60581c0);	/* CPFCH */
+	__raw_writew(0x6010, 0xe60581c6);	/* CGPOSR */
+	__raw_writew(0x8a0a, 0xe605810c);	/* USBCR2 */
+
+	sh7367_add_standard_devices();
+
+	platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
+}
+
+MACHINE_START(G3EVM, "g3evm")
+	.phys_io	= 0xe6000000,
+	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
+	.map_io		= g3evm_map_io,
+	.init_irq	= sh7367_init_irq,
+	.init_machine	= g3evm_init,
+	.timer		= &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
new file mode 100644
index 0000000..5acd623
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -0,0 +1,211 @@
+/*
+ * G4EVM board support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <mach/sh7377.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel_ro",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+/* USBHS */
+void usb_host_port_power(int port, int power)
+{
+	if (!power) /* only power-on supported for now */
+		return;
+
+	/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
+	__raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+}
+
+static struct r8a66597_platdata usb_host_data = {
+	.on_chip = 1,
+	.port_power = usb_host_port_power,
+};
+
+static struct resource usb_host_resources[] = {
+	[0] = {
+		.name	= "USBHS",
+		.start	= 0xe6890000,
+		.end	= 0xe68900e5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.platform_data		= &usb_host_data,
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usb_host_resources),
+	.resource	= usb_host_resources,
+};
+
+static struct platform_device *g4evm_devices[] __initdata = {
+	&nor_flash_device,
+	&usb_host_device,
+};
+
+static struct map_desc g4evm_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+static void __init g4evm_map_io(void)
+{
+	iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
+
+	/* setup early devices, clocks and console here as well */
+	sh7377_add_early_devices();
+	sh7367_clock_init(); /* use g3 clocks for now */
+	shmobile_setup_console();
+}
+
+static void __init g4evm_init(void)
+{
+	sh7377_pinmux_init();
+
+	/* Lit DS14 LED */
+	gpio_request(GPIO_PORT109, NULL);
+	gpio_direction_output(GPIO_PORT109, 1);
+	gpio_export(GPIO_PORT109, 1);
+
+	/* Lit DS15 LED */
+	gpio_request(GPIO_PORT110, NULL);
+	gpio_direction_output(GPIO_PORT110, 1);
+	gpio_export(GPIO_PORT110, 1);
+
+	/* Lit DS16 LED */
+	gpio_request(GPIO_PORT112, NULL);
+	gpio_direction_output(GPIO_PORT112, 1);
+	gpio_export(GPIO_PORT112, 1);
+
+	/* Lit DS17 LED */
+	gpio_request(GPIO_PORT113, NULL);
+	gpio_direction_output(GPIO_PORT113, 1);
+	gpio_export(GPIO_PORT113, 1);
+
+	/* USBHS */
+	gpio_request(GPIO_FN_VBUS_0, NULL);
+	gpio_request(GPIO_FN_PWEN, NULL);
+	gpio_request(GPIO_FN_OVCN, NULL);
+	gpio_request(GPIO_FN_OVCN2, NULL);
+	gpio_request(GPIO_FN_EXTLP, NULL);
+	gpio_request(GPIO_FN_IDIN, NULL);
+
+	/* enable clock in SMSTPCR3 */
+	__raw_writel(__raw_readl(0xe615013c) & ~(1 << 22), 0xe615013c);
+
+	/* setup USB phy */
+	__raw_writew(0x0200, 0xe605810a);       /* USBCR1 */
+	__raw_writew(0x00e0, 0xe60581c0);       /* CPFCH */
+	__raw_writew(0x6010, 0xe60581c6);       /* CGPOSR */
+	__raw_writew(0x8a0a, 0xe605810c);       /* USBCR2 */
+
+	sh7377_add_standard_devices();
+
+	platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
+}
+
+MACHINE_START(G4EVM, "g4evm")
+	.phys_io	= 0xe6000000,
+	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
+	.map_io		= g4evm_map_io,
+	.init_irq	= sh7377_init_irq,
+	.init_machine	= g4evm_init,
+	.timer		= &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
new file mode 100644
index 0000000..58bd54e
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -0,0 +1,96 @@
+/*
+ * Preliminary clock framework support for sh7367
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+
+struct clk {
+	const char *name;
+	unsigned long rate;
+};
+
+#include <asm/clkdev.h>
+
+int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+EXPORT_SYMBOL(__clk_get);
+
+void __clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(__clk_put);
+
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk ? clk->rate : 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* a static peripheral clock for now - enough to get sh-sci working */
+static struct clk peripheral_clk = {
+	.name	    = "peripheral_clk",
+	.rate	    = 48000000,
+};
+
+/* a static rclk for now - enough to get sh_cmt working */
+static struct clk r_clk = {
+	.name	    = "r_clk",
+	.rate	    = 32768,
+};
+
+/* a static usb0 for now - enough to get r8a66597 working */
+static struct clk usb0_clk = {
+	.name	    = "usb0",
+};
+
+static struct clk_lookup lookups[] = {
+	{
+		.clk = &peripheral_clk,
+	}, {
+		.clk = &r_clk,
+	}, {
+		.clk = &usb0_clk,
+	}
+};
+
+void __init sh7367_clock_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++) {
+		lookups[i].con_id = lookups[i].clk->name;
+		clkdev_add(&lookups[i]);
+	}
+}
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
new file mode 100644
index 0000000..9411a5b
--- /dev/null
+++ b/arch/arm/mach-shmobile/console.c
@@ -0,0 +1,31 @@
+/*
+ * SH-Mobile Console
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+#include <asm/mach/map.h>
+
+void __init shmobile_setup_console(void)
+{
+	parse_early_param();
+
+	/* Let earlyprintk output early console messages */
+	early_platform_driver_probe("earlyprintk", 1, 1);
+}
diff --git a/arch/arm/mach-shmobile/include/mach/clkdev.h b/arch/arm/mach-shmobile/include/mach/clkdev.h
new file mode 100644
index 0000000..36d0163
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+int __clk_get(struct clk *clk);
+void __clk_put(struct clk *clk);
+
+#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
new file mode 100644
index 0000000..5790360
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -0,0 +1,23 @@
+#ifndef __ARCH_MACH_COMMON_H
+#define __ARCH_MACH_COMMON_H
+
+extern struct sys_timer shmobile_timer;
+extern void shmobile_setup_console(void);
+
+extern void sh7367_init_irq(void);
+extern void sh7367_add_early_devices(void);
+extern void sh7367_add_standard_devices(void);
+extern void sh7367_clock_init(void);
+extern void sh7367_pinmux_init(void);
+
+extern void sh7377_init_irq(void);
+extern void sh7377_add_early_devices(void);
+extern void sh7377_add_standard_devices(void);
+extern void sh7377_pinmux_init(void);
+
+extern void sh7372_init_irq(void);
+extern void sh7372_add_early_devices(void);
+extern void sh7372_add_standard_devices(void);
+extern void sh7372_pinmux_init(void);
+
+#endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h
new file mode 100644
index 0000000..40a8c178
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
new file mode 100644
index 0000000..a285d13
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr     \base, =INTFLGA
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr     \irqnr, [\base]
+	cmp	\irqnr, #0
+	beq	1000f
+	/* intevt to irq number */
+	lsr	\irqnr, \irqnr, #0x5
+	subs	\irqnr, \irqnr, #16
+
+1000:
+	.endm
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
new file mode 100644
index 0000000..5bc6bd4
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -0,0 +1,48 @@
+/*
+ * Generic GPIO API and pinmux table support
+ *
+ * Copyright (c) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+
+#define ARCH_NR_GPIOS 1024
+#include <linux/sh_pfc.h>
+
+#ifdef CONFIG_GPIOLIB
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-shmobile/include/mach/hardware.h b/arch/arm/mach-shmobile/include/mach/hardware.h
new file mode 100644
index 0000000..3f0ef19
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/hardware.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_HARDWARE_H
+#define __ASM_MACH_HARDWARE_H
+
+/* INTFLGA register - used by low level interrupt code in entry-macro.S */
+#define INTFLGA			0xe6980018
+
+#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-shmobile/include/mach/io.h b/arch/arm/mach-shmobile/include/mach/io.h
new file mode 100644
index 0000000..7339fe4
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/io.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
new file mode 100644
index 0000000..5179b72
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+#define NR_IRQS         512
+#define NR_IRQS_LEGACY  8
+
+#define evt2irq(evt)		(((evt) >> 5) - 16)
+#define irq2evt(irq)		(((irq) + 16) << 5)
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
new file mode 100644
index 0000000..e188183
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/memory.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_MEMORY_H
+#define __ASM_MACH_MEMORY_H
+
+#define PHYS_OFFSET	UL(CONFIG_MEMORY_START)
+#define MEM_SIZE	UL(CONFIG_MEMORY_SIZE)
+
+#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7367.h b/arch/arm/mach-shmobile/include/mach/sh7367.h
new file mode 100644
index 0000000..52d0de6
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7367.h
@@ -0,0 +1,332 @@
+#ifndef __ASM_SH7367_H__
+#define __ASM_SH7367_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* 49-1 -> 49-6 (GPIO) */
+	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+	GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+	GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+	GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+	GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+	GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+	GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+	GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+	GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+	GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
+	GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
+
+	GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
+	GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
+
+	GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
+	GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
+
+	GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
+	GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
+
+	GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
+	GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
+
+	GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
+	GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269,
+
+	GPIO_PORT270, GPIO_PORT271, GPIO_PORT272,
+
+	/* Special Pull-up / Pull-down Functions */
+	GPIO_FN_PORT48_KEYIN0_PU, GPIO_FN_PORT49_KEYIN1_PU,
+	GPIO_FN_PORT50_KEYIN2_PU, GPIO_FN_PORT55_KEYIN3_PU,
+	GPIO_FN_PORT56_KEYIN4_PU, GPIO_FN_PORT57_KEYIN5_PU,
+	GPIO_FN_PORT58_KEYIN6_PU,
+
+	/* 49-1 (FN) */
+	GPIO_FN_VBUS0, GPIO_FN_CPORT0, GPIO_FN_CPORT1, GPIO_FN_CPORT2,
+	GPIO_FN_CPORT3, GPIO_FN_CPORT4, GPIO_FN_CPORT5, GPIO_FN_CPORT6,
+	GPIO_FN_CPORT7, GPIO_FN_CPORT8, GPIO_FN_CPORT9, GPIO_FN_CPORT10,
+	GPIO_FN_CPORT11, GPIO_FN_SIN2, GPIO_FN_CPORT12, GPIO_FN_XCTS2,
+	GPIO_FN_CPORT13, GPIO_FN_RFSPO4, GPIO_FN_CPORT14, GPIO_FN_RFSPO5,
+	GPIO_FN_CPORT15, GPIO_FN_CPORT16, GPIO_FN_CPORT17, GPIO_FN_SOUT2,
+	GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_CPORT19, GPIO_FN_CPORT20,
+	GPIO_FN_RFSPO6, GPIO_FN_CPORT21, GPIO_FN_STATUS0, GPIO_FN_CPORT22,
+	GPIO_FN_STATUS1, GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7,
+	GPIO_FN_MPORT0, GPIO_FN_MPORT1, GPIO_FN_B_SYNLD1, GPIO_FN_B_SYNLD2,
+	GPIO_FN_XMAINPS, GPIO_FN_XDIVPS, GPIO_FN_XIDRST, GPIO_FN_IDCLK,
+	GPIO_FN_IDIO, GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD,
+	GPIO_FN_M02_BERDAT, GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
+	GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK,
+	GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS,
+
+	/* 49-2 (FN) */
+	GPIO_FN_HSU_IQ_AGC6, GPIO_FN_MFG2_IN2, GPIO_FN_MSIOF2_MCK0,
+	GPIO_FN_HSU_IQ_AGC5, GPIO_FN_MFG2_IN1, GPIO_FN_MSIOF2_MCK1,
+	GPIO_FN_HSU_IQ_AGC4, GPIO_FN_MSIOF2_RSYNC,
+	GPIO_FN_HSU_IQ_AGC3, GPIO_FN_MFG2_OUT1, GPIO_FN_MSIOF2_RSCK,
+	GPIO_FN_HSU_IQ_AGC2, GPIO_FN_PORT42_KEYOUT0,
+	GPIO_FN_HSU_IQ_AGC1, GPIO_FN_PORT43_KEYOUT1,
+	GPIO_FN_HSU_IQ_AGC0, GPIO_FN_PORT44_KEYOUT2,
+	GPIO_FN_HSU_IQ_AGC_ST, GPIO_FN_PORT45_KEYOUT3,
+	GPIO_FN_HSU_IQ_PDO, GPIO_FN_PORT46_KEYOUT4,
+	GPIO_FN_HSU_IQ_PYO, GPIO_FN_PORT47_KEYOUT5,
+	GPIO_FN_HSU_EN_TXMUX_G3MO, GPIO_FN_PORT48_KEYIN0,
+	GPIO_FN_HSU_I_TXMUX_G3MO, GPIO_FN_PORT49_KEYIN1,
+	GPIO_FN_HSU_Q_TXMUX_G3MO, GPIO_FN_PORT50_KEYIN2,
+	GPIO_FN_HSU_SYO, GPIO_FN_PORT51_MSIOF2_TSYNC,
+	GPIO_FN_HSU_SDO, GPIO_FN_PORT52_MSIOF2_TSCK,
+	GPIO_FN_HSU_TGTTI_G3MO, GPIO_FN_PORT53_MSIOF2_TXD,
+	GPIO_FN_B_TIME_STAMP, GPIO_FN_PORT54_MSIOF2_RXD,
+	GPIO_FN_HSU_SDI, GPIO_FN_PORT55_KEYIN3,
+	GPIO_FN_HSU_SCO, GPIO_FN_PORT56_KEYIN4,
+	GPIO_FN_HSU_DREQ, GPIO_FN_PORT57_KEYIN5,
+	GPIO_FN_HSU_DACK, GPIO_FN_PORT58_KEYIN6,
+	GPIO_FN_HSU_CLK61M, GPIO_FN_PORT59_MSIOF2_SS1,
+	GPIO_FN_HSU_XRST, GPIO_FN_PORT60_MSIOF2_SS2,
+	GPIO_FN_PCMCLKO, GPIO_FN_SYNC8KO, GPIO_FN_DNPCM_A, GPIO_FN_UPPCM_A,
+	GPIO_FN_XTALB1L,
+	GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS,
+	GPIO_FN_GPS_AGC2, GPIO_FN_SCIFA0_SCK,
+	GPIO_FN_GPS_AGC3, GPIO_FN_SCIFA0_TXD,
+	GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD,
+	GPIO_FN_GPS_PWRD, GPIO_FN_SCIFA0_CTS,
+	GPIO_FN_GPS_IM, GPIO_FN_GPS_IS, GPIO_FN_GPS_QM, GPIO_FN_GPS_QS,
+	GPIO_FN_SIUBOMC, GPIO_FN_TPU2TO0,
+	GPIO_FN_SIUCKB, GPIO_FN_TPU2TO1,
+	GPIO_FN_SIUBOLR, GPIO_FN_BBIF2_TSYNC, GPIO_FN_TPU2TO2,
+	GPIO_FN_SIUBOBT, GPIO_FN_BBIF2_TSCK, GPIO_FN_TPU2TO3,
+	GPIO_FN_SIUBOSLD, GPIO_FN_BBIF2_TXD, GPIO_FN_TPU3TO0,
+	GPIO_FN_SIUBILR, GPIO_FN_TPU3TO1,
+	GPIO_FN_SIUBIBT, GPIO_FN_TPU3TO2,
+	GPIO_FN_SIUBISLD, GPIO_FN_TPU3TO3,
+	GPIO_FN_NMI, GPIO_FN_TPU4TO0,
+	GPIO_FN_DNPCM_M, GPIO_FN_TPU4TO1, GPIO_FN_TPU4TO2, GPIO_FN_TPU4TO3,
+	GPIO_FN_IRQ_TMPB,
+	GPIO_FN_PWEN, GPIO_FN_MFG1_OUT1,
+	GPIO_FN_OVCN, GPIO_FN_MFG1_IN1,
+	GPIO_FN_OVCN2, GPIO_FN_MFG1_IN2,
+
+	/* 49-3 (FN) */
+	GPIO_FN_RFSPO1, GPIO_FN_RFSPO2, GPIO_FN_RFSPO3, GPIO_FN_PORT93_VIO_CKO2,
+	GPIO_FN_USBTERM, GPIO_FN_EXTLP, GPIO_FN_IDIN,
+	GPIO_FN_SCIFA5_CTS, GPIO_FN_MFG0_IN1,
+	GPIO_FN_SCIFA5_RTS, GPIO_FN_MFG0_IN2,
+	GPIO_FN_SCIFA5_RXD,
+	GPIO_FN_SCIFA5_TXD,
+	GPIO_FN_SCIFA5_SCK, GPIO_FN_MFG0_OUT1,
+	GPIO_FN_A0_EA0, GPIO_FN_BS,
+	GPIO_FN_A14_EA14, GPIO_FN_PORT102_KEYOUT0,
+	GPIO_FN_A15_EA15, GPIO_FN_PORT103_KEYOUT1, GPIO_FN_DV_CLKOL,
+	GPIO_FN_A16_EA16, GPIO_FN_PORT104_KEYOUT2,
+	GPIO_FN_DV_VSYNCL, GPIO_FN_MSIOF0_SS1,
+	GPIO_FN_A17_EA17, GPIO_FN_PORT105_KEYOUT3,
+	GPIO_FN_DV_HSYNCL, GPIO_FN_MSIOF0_TSYNC,
+	GPIO_FN_A18_EA18, GPIO_FN_PORT106_KEYOUT4,
+	GPIO_FN_DV_DL0, GPIO_FN_MSIOF0_TSCK,
+	GPIO_FN_A19_EA19, GPIO_FN_PORT107_KEYOUT5,
+	GPIO_FN_DV_DL1, GPIO_FN_MSIOF0_TXD,
+	GPIO_FN_A20_EA20, GPIO_FN_PORT108_KEYIN0,
+	GPIO_FN_DV_DL2, GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_A21_EA21, GPIO_FN_PORT109_KEYIN1,
+	GPIO_FN_DV_DL3, GPIO_FN_MSIOF0_RSYNC,
+	GPIO_FN_A22_EA22, GPIO_FN_PORT110_KEYIN2,
+	GPIO_FN_DV_DL4, GPIO_FN_MSIOF0_MCK0,
+	GPIO_FN_A23_EA23, GPIO_FN_PORT111_KEYIN3,
+	GPIO_FN_DV_DL5, GPIO_FN_MSIOF0_MCK1,
+	GPIO_FN_A24_EA24, GPIO_FN_PORT112_KEYIN4,
+	GPIO_FN_DV_DL6, GPIO_FN_MSIOF0_RXD,
+	GPIO_FN_A25_EA25, GPIO_FN_PORT113_KEYIN5,
+	GPIO_FN_DV_DL7, GPIO_FN_MSIOF0_SS2,
+	GPIO_FN_A26, GPIO_FN_PORT113_KEYIN6, GPIO_FN_DV_CLKIL,
+	GPIO_FN_D0_ED0_NAF0, GPIO_FN_D1_ED1_NAF1, GPIO_FN_D2_ED2_NAF2,
+	GPIO_FN_D3_ED3_NAF3, GPIO_FN_D4_ED4_NAF4, GPIO_FN_D5_ED5_NAF5,
+	GPIO_FN_D6_ED6_NAF6, GPIO_FN_D7_ED7_NAF7, GPIO_FN_D8_ED8_NAF8,
+	GPIO_FN_D9_ED9_NAF9, GPIO_FN_D10_ED10_NAF10, GPIO_FN_D11_ED11_NAF11,
+	GPIO_FN_D12_ED12_NAF12, GPIO_FN_D13_ED13_NAF13,
+	GPIO_FN_D14_ED14_NAF14, GPIO_FN_D15_ED15_NAF15,
+	GPIO_FN_CS4, GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_FCE1,
+	GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_FCE0, GPIO_FN_CS6A,
+	GPIO_FN_DACK0, GPIO_FN_WAIT, GPIO_FN_DREQ0, GPIO_FN_RD_XRD,
+	GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_WE0_XWR0_FWE,
+	GPIO_FN_WE1_XWR1, GPIO_FN_FRB, GPIO_FN_CKO,
+	GPIO_FN_NBRSTOUT, GPIO_FN_NBRST,
+
+	/* 49-4 (FN) */
+	GPIO_FN_RFSPO0, GPIO_FN_PORT146_VIO_CKO2, GPIO_FN_TSTMD,
+	GPIO_FN_VIO_VD, GPIO_FN_VIO_HD,
+	GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2,
+	GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5,
+	GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8,
+	GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11,
+	GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14,
+	GPIO_FN_VIO_D15, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD,
+	GPIO_FN_VIO_CKO,
+	GPIO_FN_MFG3_IN1, GPIO_FN_MFG3_IN2,
+	GPIO_FN_M9_SLCD_A01, GPIO_FN_MFG3_OUT1, GPIO_FN_TPU0TO0,
+	GPIO_FN_M10_SLCD_CK1, GPIO_FN_MFG4_IN1, GPIO_FN_TPU0TO1,
+	GPIO_FN_M11_SLCD_SO1, GPIO_FN_MFG4_IN2, GPIO_FN_TPU0TO2,
+	GPIO_FN_M12_SLCD_CE1, GPIO_FN_MFG4_OUT1, GPIO_FN_TPU0TO3,
+	GPIO_FN_LCDD0, GPIO_FN_PORT175_KEYOUT0, GPIO_FN_DV_D0,
+	GPIO_FN_SIUCKA, GPIO_FN_MFG0_OUT2,
+	GPIO_FN_LCDD1, GPIO_FN_PORT176_KEYOUT1, GPIO_FN_DV_D1,
+	GPIO_FN_SIUAOLR, GPIO_FN_BBIF2_TSYNC1,
+	GPIO_FN_LCDD2, GPIO_FN_PORT177_KEYOUT2, GPIO_FN_DV_D2,
+	GPIO_FN_SIUAOBT, GPIO_FN_BBIF2_TSCK1,
+	GPIO_FN_LCDD3, GPIO_FN_PORT178_KEYOUT3, GPIO_FN_DV_D3,
+	GPIO_FN_SIUAOSLD, GPIO_FN_BBIF2_TXD1,
+	GPIO_FN_LCDD4, GPIO_FN_PORT179_KEYOUT4, GPIO_FN_DV_D4,
+	GPIO_FN_SIUAISPD, GPIO_FN_MFG1_OUT2,
+	GPIO_FN_LCDD5, GPIO_FN_PORT180_KEYOUT5, GPIO_FN_DV_D5,
+	GPIO_FN_SIUAILR, GPIO_FN_MFG2_OUT2,
+	GPIO_FN_LCDD6, GPIO_FN_DV_D6,
+	GPIO_FN_SIUAIBT, GPIO_FN_MFG3_OUT2, GPIO_FN_XWR2,
+	GPIO_FN_LCDD7, GPIO_FN_DV_D7,
+	GPIO_FN_SIUAISLD, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3,
+	GPIO_FN_LCDD8, GPIO_FN_DV_D8, GPIO_FN_D16, GPIO_FN_ED16,
+	GPIO_FN_LCDD9, GPIO_FN_DV_D9, GPIO_FN_D17, GPIO_FN_ED17,
+	GPIO_FN_LCDD10, GPIO_FN_DV_D10, GPIO_FN_D18, GPIO_FN_ED18,
+	GPIO_FN_LCDD11, GPIO_FN_DV_D11, GPIO_FN_D19, GPIO_FN_ED19,
+	GPIO_FN_LCDD12, GPIO_FN_DV_D12, GPIO_FN_D20, GPIO_FN_ED20,
+	GPIO_FN_LCDD13, GPIO_FN_DV_D13, GPIO_FN_D21, GPIO_FN_ED21,
+	GPIO_FN_LCDD14, GPIO_FN_DV_D14, GPIO_FN_D22, GPIO_FN_ED22,
+	GPIO_FN_LCDD15, GPIO_FN_DV_D15, GPIO_FN_D23, GPIO_FN_ED23,
+	GPIO_FN_LCDD16, GPIO_FN_DV_HSYNC, GPIO_FN_D24, GPIO_FN_ED24,
+	GPIO_FN_LCDD17, GPIO_FN_DV_VSYNC, GPIO_FN_D25, GPIO_FN_ED25,
+	GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_MSIOF0L_TSCK,
+	GPIO_FN_D26, GPIO_FN_ED26,
+	GPIO_FN_LCDD19, GPIO_FN_MSIOF0L_TSYNC,
+	GPIO_FN_D27, GPIO_FN_ED27,
+	GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0,
+	GPIO_FN_D28, GPIO_FN_ED28,
+	GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1,
+	GPIO_FN_D29, GPIO_FN_ED29,
+	GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_SS1,
+	GPIO_FN_D30, GPIO_FN_ED30,
+	GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_SS2,
+	GPIO_FN_D31, GPIO_FN_ED31,
+	GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_DV_CKO, GPIO_FN_SIUAOSPD,
+	GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_RSYNC,
+
+
+	/* 49-5 (FN) */
+	GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3,
+	GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_RSCK,
+	GPIO_FN_LCDCSYN, GPIO_FN_LCDCSYN2, GPIO_FN_DV_CKI,
+	GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_MSIOF0L_RXD,
+	GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_MSIOF0L_TXD,
+	GPIO_FN_VIO_DR0, GPIO_FN_VIO_DR1, GPIO_FN_VIO_DR2, GPIO_FN_VIO_DR3,
+	GPIO_FN_VIO_DR4, GPIO_FN_VIO_DR5, GPIO_FN_VIO_DR6, GPIO_FN_VIO_DR7,
+	GPIO_FN_VIO_VDR, GPIO_FN_VIO_HDR,
+	GPIO_FN_VIO_CLKR, GPIO_FN_VIO_CKOR,
+	GPIO_FN_SCIFA1_TXD, GPIO_FN_GPS_PGFA0,
+	GPIO_FN_SCIFA1_SCK, GPIO_FN_GPS_PGFA1,
+	GPIO_FN_SCIFA1_RTS, GPIO_FN_GPS_EPPSINMON,
+	GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_CTS,
+	GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA1_TXD2, GPIO_FN_GPS_TXD,
+	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA1_CTS2, GPIO_FN_I2C_SDA2,
+	GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA1_SCK2,
+	GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA1_RXD2, GPIO_FN_GPS_RXD,
+	GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA1_RTS2,
+	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_I2C_SCL2,
+	GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1,
+	GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3,
+	GPIO_FN_MSIOF1_SS2,
+	GPIO_FN_PORT236_IROUT, GPIO_FN_IRDA_OUT,
+	GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL,
+	GPIO_FN_TPU1TO0, GPIO_FN_TS_SPSYNC3,
+	GPIO_FN_TPU1TO1, GPIO_FN_TS_SDAT3,
+	GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT241_MSIOF2_SS1,
+	GPIO_FN_TPU1TO3, GPIO_FN_PORT242_MSIOF2_TSCK,
+	GPIO_FN_M13_BSW, GPIO_FN_PORT243_MSIOF2_TSYNC,
+	GPIO_FN_M14_GSW, GPIO_FN_PORT244_MSIOF2_TXD,
+	GPIO_FN_PORT245_IROUT, GPIO_FN_M15_RSW,
+	GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1,
+	GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1,
+	GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT248_MSIOF2_SS2,
+	GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT249_MSIOF2_RXD,
+	GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
+	GPIO_FN_SDHICLK0, GPIO_FN_TCK2,
+	GPIO_FN_SDHICD0,
+	GPIO_FN_SDHID0_0, GPIO_FN_TMS2,
+	GPIO_FN_SDHID0_1, GPIO_FN_TDO2,
+	GPIO_FN_SDHID0_2, GPIO_FN_TDI2,
+	GPIO_FN_SDHID0_3, GPIO_FN_RTCK2,
+
+	/* 49-6 (FN) */
+	GPIO_FN_SDHICMD0, GPIO_FN_TRST2,
+	GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2,
+	GPIO_FN_SDHICLK1, GPIO_FN_TCK3,
+	GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2,
+	GPIO_FN_TS_SPSYNC2, GPIO_FN_TMS3,
+	GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_AO2,
+	GPIO_FN_TS_SDAT2, GPIO_FN_TDO3,
+	GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2,
+	GPIO_FN_TS_SDEN2, GPIO_FN_TDI3,
+	GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2,
+	GPIO_FN_TS_SCK2, GPIO_FN_RTCK3,
+	GPIO_FN_SDHICMD1, GPIO_FN_TRST3,
+	GPIO_FN_SDHICLK2, GPIO_FN_SCIFB_SCK,
+	GPIO_FN_SDHID2_0, GPIO_FN_SCIFB_TXD,
+	GPIO_FN_SDHID2_1, GPIO_FN_SCIFB_CTS,
+	GPIO_FN_SDHID2_2, GPIO_FN_SCIFB_RXD,
+	GPIO_FN_SDHID2_3, GPIO_FN_SCIFB_RTS,
+	GPIO_FN_SDHICMD2,
+	GPIO_FN_RESETOUTS,
+	GPIO_FN_DIVLOCK,
+};
+
+#endif /* __ASM_SH7367_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
new file mode 100644
index 0000000..dc34f00
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -0,0 +1,434 @@
+/*
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_SH7372_H__
+#define __ASM_SH7372_H__
+
+/*
+ * Pin Function Controller:
+ *	GPIO_FN_xx - GPIO used to select pin function
+ *	GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* PORT */
+	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+	GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+	GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+	GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+	GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+	GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+	GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+	GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+	GPIO_PORT190,
+
+	/* IRQ */
+	GPIO_FN_IRQ0_6,		/* PORT   6 */
+	GPIO_FN_IRQ0_162,	/* PORT 162 */
+	GPIO_FN_IRQ1,		/* PORT  12 */
+	GPIO_FN_IRQ2_4,		/* PORT   4 */
+	GPIO_FN_IRQ2_5,		/* PORT   5 */
+	GPIO_FN_IRQ3_8,		/* PORT   8 */
+	GPIO_FN_IRQ3_16,	/* PORT  16 */
+	GPIO_FN_IRQ4_17,	/* PORT  17 */
+	GPIO_FN_IRQ4_163,	/* PORT 163 */
+	GPIO_FN_IRQ5,		/* PORT  18 */
+	GPIO_FN_IRQ6_39,	/* PORT  39 */
+	GPIO_FN_IRQ6_164,	/* PORT 164 */
+	GPIO_FN_IRQ7_40,	/* PORT  40 */
+	GPIO_FN_IRQ7_167,	/* PORT 167 */
+	GPIO_FN_IRQ8_41,	/* PORT  41 */
+	GPIO_FN_IRQ8_168,	/* PORT 168 */
+	GPIO_FN_IRQ9_42,	/* PORT  42 */
+	GPIO_FN_IRQ9_169,	/* PORT 169 */
+	GPIO_FN_IRQ10,		/* PORT  65 */
+	GPIO_FN_IRQ11,		/* PORT  67 */
+	GPIO_FN_IRQ12_80,	/* PORT  80 */
+	GPIO_FN_IRQ12_137,	/* PORT 137 */
+	GPIO_FN_IRQ13_81,	/* PORT  81 */
+	GPIO_FN_IRQ13_145,	/* PORT 145 */
+	GPIO_FN_IRQ14_82,	/* PORT  82 */
+	GPIO_FN_IRQ14_146,	/* PORT 146 */
+	GPIO_FN_IRQ15_83,	/* PORT  83 */
+	GPIO_FN_IRQ15_147,	/* PORT 147 */
+	GPIO_FN_IRQ16_84,	/* PORT  84 */
+	GPIO_FN_IRQ16_170,	/* PORT 170 */
+	GPIO_FN_IRQ17,		/* PORT  85 */
+	GPIO_FN_IRQ18,		/* PORT  86 */
+	GPIO_FN_IRQ19,		/* PORT  87 */
+	GPIO_FN_IRQ20,		/* PORT  92 */
+	GPIO_FN_IRQ21,		/* PORT  93 */
+	GPIO_FN_IRQ22,		/* PORT  94 */
+	GPIO_FN_IRQ23,		/* PORT  95 */
+	GPIO_FN_IRQ24,		/* PORT 112 */
+	GPIO_FN_IRQ25,		/* PORT 119 */
+	GPIO_FN_IRQ26_121,	/* PORT 121 */
+	GPIO_FN_IRQ26_172,	/* PORT 172 */
+	GPIO_FN_IRQ27_122,	/* PORT 122 */
+	GPIO_FN_IRQ27_180,	/* PORT 180 */
+	GPIO_FN_IRQ28_123,	/* PORT 123 */
+	GPIO_FN_IRQ28_181,	/* PORT 181 */
+	GPIO_FN_IRQ29_129,	/* PORT 129 */
+	GPIO_FN_IRQ29_182,	/* PORT 182 */
+	GPIO_FN_IRQ30_130,	/* PORT 130 */
+	GPIO_FN_IRQ30_183,	/* PORT 183 */
+	GPIO_FN_IRQ31_138,	/* PORT 138 */
+	GPIO_FN_IRQ31_184,	/* PORT 184 */
+
+	/*
+	 * MSIOF0	(PORT 36, 37, 38, 39
+	 * 		      40, 41, 42, 43, 44, 45)
+	 */
+	GPIO_FN_MSIOF0_TSYNC,	GPIO_FN_MSIOF0_TSCK,
+	GPIO_FN_MSIOF0_RXD,	GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_MSIOF0_RSYNC,	GPIO_FN_MSIOF0_MCK0,
+	GPIO_FN_MSIOF0_MCK1,	GPIO_FN_MSIOF0_SS1,
+	GPIO_FN_MSIOF0_SS2,	GPIO_FN_MSIOF0_TXD,
+
+	/*
+	 * MSIOF1	(PORT 39, 40, 41, 42, 43, 44
+	 * 		      84, 85, 86, 87, 88, 89, 90, 91, 92, 93)
+	 */
+	GPIO_FN_MSIOF1_TSCK_39,	GPIO_FN_MSIOF1_TSYNC_40,
+	GPIO_FN_MSIOF1_TSCK_88,	GPIO_FN_MSIOF1_TSYNC_89,
+	GPIO_FN_MSIOF1_TXD_41,	GPIO_FN_MSIOF1_RXD_42,
+	GPIO_FN_MSIOF1_TXD_90,	GPIO_FN_MSIOF1_RXD_91,
+	GPIO_FN_MSIOF1_SS1_43,	GPIO_FN_MSIOF1_SS2_44,
+	GPIO_FN_MSIOF1_SS1_92,	GPIO_FN_MSIOF1_SS2_93,
+	GPIO_FN_MSIOF1_RSCK,	GPIO_FN_MSIOF1_RSYNC,
+	GPIO_FN_MSIOF1_MCK0,	GPIO_FN_MSIOF1_MCK1,
+
+	/*
+	 * MSIOF2	(PORT 134, 135, 136, 137, 138, 139
+	 *		      148, 149, 150, 151)
+	 */
+	GPIO_FN_MSIOF2_RSCK,	GPIO_FN_MSIOF2_RSYNC,
+	GPIO_FN_MSIOF2_MCK0,	GPIO_FN_MSIOF2_MCK1,
+	GPIO_FN_MSIOF2_SS1,	GPIO_FN_MSIOF2_SS2,
+	GPIO_FN_MSIOF2_TSYNC,	GPIO_FN_MSIOF2_TSCK,
+	GPIO_FN_MSIOF2_RXD,	GPIO_FN_MSIOF2_TXD,
+
+	/* MSIOF3	(PORT 76, 77, 78, 79, 80, 81, 82, 83) */
+	GPIO_FN_BBIF1_RXD,	GPIO_FN_BBIF1_TSYNC,
+	GPIO_FN_BBIF1_TSCK,	GPIO_FN_BBIF1_TXD,
+	GPIO_FN_BBIF1_RSCK,	GPIO_FN_BBIF1_RSYNC,
+	GPIO_FN_BBIF1_FLOW,	GPIO_FN_BB_RX_FLOW_N,
+
+	/* MSIOF4	(PORT 0, 1, 2, 3) */
+	GPIO_FN_BBIF2_TSCK1,	GPIO_FN_BBIF2_TSYNC1,
+	GPIO_FN_BBIF2_TXD1,	GPIO_FN_BBIF2_RXD,
+
+	/* FSI		(PORT 4, 5, 6, 7, 8, 9, 10, 11, 15) */
+	GPIO_FN_FSIACK,		GPIO_FN_FSIBCK,
+	GPIO_FN_FSIAILR,	GPIO_FN_FSIAIBT,
+	GPIO_FN_FSIAISLD,	GPIO_FN_FSIAOMC,
+	GPIO_FN_FSIAOLR,	GPIO_FN_FSIAOBT,
+	GPIO_FN_FSIAOSLD,	GPIO_FN_FSIASPDIF_11,
+	GPIO_FN_FSIASPDIF_15,
+
+	/* FMSI		(PORT 12, 13, 14, 15, 16, 17, 18, 65) */
+	GPIO_FN_FMSOCK,		GPIO_FN_FMSOOLR,
+	GPIO_FN_FMSIOLR,	GPIO_FN_FMSOOBT,
+	GPIO_FN_FMSIOBT,	GPIO_FN_FMSOSLD,
+	GPIO_FN_FMSOILR,	GPIO_FN_FMSIILR,
+	GPIO_FN_FMSOIBT,	GPIO_FN_FMSIIBT,
+	GPIO_FN_FMSISLD,	GPIO_FN_FMSICK,
+
+	/* SCIFA0	(PORT 152, 153, 156, 157, 158) */
+	GPIO_FN_SCIFA0_TXD,	GPIO_FN_SCIFA0_RXD,
+	GPIO_FN_SCIFA0_SCK,	GPIO_FN_SCIFA0_RTS,
+	GPIO_FN_SCIFA0_CTS,
+
+	/* SCIFA1	(PORT 154, 155, 159, 160, 161) */
+	GPIO_FN_SCIFA1_TXD,	GPIO_FN_SCIFA1_RXD,
+	GPIO_FN_SCIFA1_SCK,	GPIO_FN_SCIFA1_RTS,
+	GPIO_FN_SCIFA1_CTS,
+
+	/* SCIFA2	(PORT 94, 95, 96, 97, 98) */
+	GPIO_FN_SCIFA2_CTS1,	GPIO_FN_SCIFA2_RTS1,
+	GPIO_FN_SCIFA2_TXD1,	GPIO_FN_SCIFA2_RXD1,
+	GPIO_FN_SCIFA2_SCK1,
+
+	/* SCIFA3	(PORT 43, 44,
+			     140, 141, 142, 143, 144) */
+	GPIO_FN_SCIFA3_CTS_43,	GPIO_FN_SCIFA3_CTS_140,
+	GPIO_FN_SCIFA3_RTS_44,	GPIO_FN_SCIFA3_RTS_141,
+	GPIO_FN_SCIFA3_SCK,	GPIO_FN_SCIFA3_TXD,
+	GPIO_FN_SCIFA3_RXD,
+
+	/* SCIFA4	(PORT 5, 6) */
+	GPIO_FN_SCIFA4_RXD,	GPIO_FN_SCIFA4_TXD,
+
+	/* SCIFA5	(PORT 8, 12) */
+	GPIO_FN_SCIFA5_RXD,	GPIO_FN_SCIFA5_TXD,
+
+	/* SCIFB	(PORT 162, 163, 164, 165, 166) */
+	GPIO_FN_SCIFB_SCK,	GPIO_FN_SCIFB_RTS,
+	GPIO_FN_SCIFB_CTS,	GPIO_FN_SCIFB_TXD,
+	GPIO_FN_SCIFB_RXD,
+
+	/*
+	 * CEU		(PORT 16, 17,
+	 *		      100, 101, 102, 103, 104, 105, 106, 107, 108, 109,
+	 *		      110, 111, 112, 113, 114, 115, 116, 117, 118, 119,
+	 *		      120)
+	 */
+	GPIO_FN_VIO_HD,		GPIO_FN_VIO_CKO1,	GPIO_FN_VIO_CKO2,
+	GPIO_FN_VIO_VD,		GPIO_FN_VIO_CLK,	GPIO_FN_VIO_FIELD,
+	GPIO_FN_VIO_CKO,
+	GPIO_FN_VIO_D0,		GPIO_FN_VIO_D1,		GPIO_FN_VIO_D2,
+	GPIO_FN_VIO_D3,		GPIO_FN_VIO_D4,		GPIO_FN_VIO_D5,
+	GPIO_FN_VIO_D6,		GPIO_FN_VIO_D7,		GPIO_FN_VIO_D8,
+	GPIO_FN_VIO_D9,		GPIO_FN_VIO_D10,	GPIO_FN_VIO_D11,
+	GPIO_FN_VIO_D12,	GPIO_FN_VIO_D13,	GPIO_FN_VIO_D14,
+	GPIO_FN_VIO_D15,
+
+	/* USB0		(PORT 113, 114, 115, 116, 117, 167) */
+	GPIO_FN_IDIN_0,		GPIO_FN_EXTLP_0,
+	GPIO_FN_OVCN2_0,	GPIO_FN_PWEN_0,
+	GPIO_FN_OVCN_0,		GPIO_FN_VBUS0_0,
+
+	/* USB1		(PORT 18, 113, 114, 115, 116, 117, 138, 162, 168) */
+	GPIO_FN_IDIN_1_18,	GPIO_FN_IDIN_1_113,
+	GPIO_FN_PWEN_1_115,	GPIO_FN_PWEN_1_138,
+	GPIO_FN_OVCN_1_114,	GPIO_FN_OVCN_1_162,
+	GPIO_FN_EXTLP_1,	GPIO_FN_OVCN2_1,
+	GPIO_FN_VBUS0_1,
+
+	/* GPIO		(PORT 41, 42, 43, 44) */
+	GPIO_FN_GPI0,	GPIO_FN_GPI1,	GPIO_FN_GPO0,	GPIO_FN_GPO1,
+
+	/*
+	 * BSC		(PORT 19,
+	 *		      20, 21, 22, 25, 26, 27, 28, 29,
+	 *		      30, 31, 32, 33, 34, 35, 36, 37, 38, 39,
+	 *		      40, 41, 42, 43, 44, 45,
+	 *		      62, 63, 64, 65, 66, 67,
+	 *		      71, 72, 74, 75)
+	 */
+	GPIO_FN_BS,	GPIO_FN_WE1,
+	GPIO_FN_CKO,	GPIO_FN_WAIT,	GPIO_FN_RDWR,
+
+	GPIO_FN_A0,	GPIO_FN_A1,	GPIO_FN_A2,	GPIO_FN_A3,
+	GPIO_FN_A6,	GPIO_FN_A7,	GPIO_FN_A8,	GPIO_FN_A9,
+	GPIO_FN_A10,	GPIO_FN_A11,	GPIO_FN_A12,	GPIO_FN_A13,
+	GPIO_FN_A14,	GPIO_FN_A15,	GPIO_FN_A16,	GPIO_FN_A17,
+	GPIO_FN_A18,	GPIO_FN_A19,	GPIO_FN_A20,	GPIO_FN_A21,
+	GPIO_FN_A22,	GPIO_FN_A23,	GPIO_FN_A24,	GPIO_FN_A25,
+	GPIO_FN_A26,
+
+	GPIO_FN_CS0,	GPIO_FN_CS2,	GPIO_FN_CS4,
+	GPIO_FN_CS5A,	GPIO_FN_CS5B,	GPIO_FN_CS6A,
+
+	/*
+	 * BSC/FLCTL		(PORT 23, 24,
+	 *			      46, 47, 48, 49,
+	 *			      50, 51, 52, 53, 54, 55, 56, 57, 58, 59,
+	 *			      60, 61, 69, 70)
+	 */
+	GPIO_FN_RD_FSC,		GPIO_FN_WE0_FWE,
+	GPIO_FN_A4_FOE,		GPIO_FN_A5_FCDE,
+	GPIO_FN_D0_NAF0,	GPIO_FN_D1_NAF1,	GPIO_FN_D2_NAF2,
+	GPIO_FN_D3_NAF3,	GPIO_FN_D4_NAF4,	GPIO_FN_D5_NAF5,
+	GPIO_FN_D6_NAF6,	GPIO_FN_D7_NAF7,	GPIO_FN_D8_NAF8,
+	GPIO_FN_D9_NAF9,	GPIO_FN_D10_NAF10,	GPIO_FN_D11_NAF11,
+	GPIO_FN_D12_NAF12,	GPIO_FN_D13_NAF13,	GPIO_FN_D14_NAF14,
+	GPIO_FN_D15_NAF15,
+
+	/*
+	 * MMCIF(1)		(PORT 84, 85, 86, 87, 88, 89,
+	 *			      90, 91, 92, 99)
+	 */
+	GPIO_FN_MMCD0_0,	GPIO_FN_MMCD0_1,	GPIO_FN_MMCD0_2,
+	GPIO_FN_MMCD0_3,	GPIO_FN_MMCD0_4,	GPIO_FN_MMCD0_5,
+	GPIO_FN_MMCD0_6,	GPIO_FN_MMCD0_7,
+	GPIO_FN_MMCCMD0,	GPIO_FN_MMCCLK0,
+
+	/* MMCIF(2)		(PORT 54, 55, 56, 57, 58, 59, 60, 61, 66, 67) */
+	GPIO_FN_MMCD1_0,	GPIO_FN_MMCD1_1,	GPIO_FN_MMCD1_2,
+	GPIO_FN_MMCD1_3,	GPIO_FN_MMCD1_4,	GPIO_FN_MMCD1_5,
+	GPIO_FN_MMCD1_6,	GPIO_FN_MMCD1_7,
+	GPIO_FN_MMCCLK1,	GPIO_FN_MMCCMD1,
+
+	/* SPU2		(PORT 65) */
+	GPIO_FN_VINT_I,
+
+	/* FLCTL	(PORT 66, 68, 73) */
+	GPIO_FN_FCE1,	GPIO_FN_FCE0,	GPIO_FN_FRB,
+
+	/* HSI		(PORT 76, 77, 78, 79, 80, 81, 82, 83) */
+	GPIO_FN_GP_RX_FLAG,	GPIO_FN_GP_RX_DATA,	GPIO_FN_GP_TX_READY,
+	GPIO_FN_GP_RX_WAKE,	GPIO_FN_MP_TX_FLAG,	GPIO_FN_MP_TX_DATA,
+	GPIO_FN_MP_RX_READY,	GPIO_FN_MP_TX_WAKE,
+
+	/*
+	 * MFI		(PORT 76, 77, 78, 79,
+	 *		      80, 81, 82, 83, 84, 85, 86, 87, 88, 89,
+	 *		      90, 91, 92, 93, 94, 95, 96, 97, 98, 99)
+	 */
+	GPIO_FN_MFIv6,	/* see MSEL4CR 6 */
+	GPIO_FN_MFIv4,	/* see MSEL4CR 6 */
+
+	GPIO_FN_MEMC_CS0,		GPIO_FN_MEMC_BUSCLK_MEMC_A0,
+	GPIO_FN_MEMC_CS1_MEMC_A1,	GPIO_FN_MEMC_ADV_MEMC_DREQ0,
+	GPIO_FN_MEMC_WAIT_MEMC_DREQ1,	GPIO_FN_MEMC_NOE,
+	GPIO_FN_MEMC_NWE,		GPIO_FN_MEMC_INT,
+
+	GPIO_FN_MEMC_AD0,	GPIO_FN_MEMC_AD1,	GPIO_FN_MEMC_AD2,
+	GPIO_FN_MEMC_AD3,	GPIO_FN_MEMC_AD4,	GPIO_FN_MEMC_AD5,
+	GPIO_FN_MEMC_AD6,	GPIO_FN_MEMC_AD7,	GPIO_FN_MEMC_AD8,
+	GPIO_FN_MEMC_AD9,	GPIO_FN_MEMC_AD10,	GPIO_FN_MEMC_AD11,
+	GPIO_FN_MEMC_AD12,	GPIO_FN_MEMC_AD13,	GPIO_FN_MEMC_AD14,
+	GPIO_FN_MEMC_AD15,
+
+	/* SIM		(PORT 94, 95, 98) */
+	GPIO_FN_SIM_RST,	GPIO_FN_SIM_CLK,	GPIO_FN_SIM_D,
+
+	/* TPU		(PORT 93, 99, 112, 160, 161) */
+	GPIO_FN_TPU0TO0,	GPIO_FN_TPU0TO1,
+	GPIO_FN_TPU0TO2_93,	GPIO_FN_TPU0TO2_99,
+	GPIO_FN_TPU0TO3,
+
+	/* I2C2		(PORT 110, 111) */
+	GPIO_FN_I2C_SCL2,	GPIO_FN_I2C_SDA2,
+
+	/* I2C3(1)	(PORT 114, 115) */
+	GPIO_FN_I2C_SCL3,	GPIO_FN_I2C_SDA3,
+
+	/* I2C3(2)	(PORT 137, 145) */
+	GPIO_FN_I2C_SCL3S,	GPIO_FN_I2C_SDA3S,
+
+	/* I2C4(2)	(PORT 116, 117) */
+	GPIO_FN_I2C_SCL4,	GPIO_FN_I2C_SDA4,
+
+	/* I2C4(2)	(PORT 146, 147) */
+	GPIO_FN_I2C_SCL4S,	GPIO_FN_I2C_SDA4S,
+
+	/*
+	 * KEYSC	(PORT 121, 122, 123, 124, 125, 126, 127, 128, 129,
+	 *		      130, 131, 132, 133, 134, 135, 136)
+	 */
+	GPIO_FN_KEYOUT0,	GPIO_FN_KEYIN0_121,	GPIO_FN_KEYIN0_136,
+	GPIO_FN_KEYOUT1,	GPIO_FN_KEYIN1_122,	GPIO_FN_KEYIN1_135,
+	GPIO_FN_KEYOUT2,	GPIO_FN_KEYIN2_123,	GPIO_FN_KEYIN2_134,
+	GPIO_FN_KEYOUT3,	GPIO_FN_KEYIN3_124,	GPIO_FN_KEYIN3_133,
+	GPIO_FN_KEYOUT4,	GPIO_FN_KEYIN4,
+	GPIO_FN_KEYOUT5,	GPIO_FN_KEYIN5,
+	GPIO_FN_KEYOUT6,	GPIO_FN_KEYIN6,
+	GPIO_FN_KEYOUT7,	GPIO_FN_KEYIN7,
+
+	/*
+	 * LCDC		(PORT      121, 122, 123, 124, 125, 126, 127, 128, 129,
+	 *		      130, 131, 132, 133, 134, 135, 136, 137, 138, 139,
+	 *		      140, 141, 142, 143, 144, 145, 146, 147, 148, 149,
+	 *		      150, 151)
+	 */
+	GPIO_FN_LCDC0_SELECT, /* LCDC 0 */
+	GPIO_FN_LCDC1_SELECT, /* LCDC 1 */
+	GPIO_FN_LCDHSYN,	GPIO_FN_LCDCS,	GPIO_FN_LCDVSYN,
+	GPIO_FN_LCDDCK,		GPIO_FN_LCDWR,	GPIO_FN_LCDRD,
+	GPIO_FN_LCDDISP,	GPIO_FN_LCDRS,	GPIO_FN_LCDLCLK,
+	GPIO_FN_LCDDON,
+
+	GPIO_FN_LCDD0,	GPIO_FN_LCDD1,	GPIO_FN_LCDD2,	GPIO_FN_LCDD3,
+	GPIO_FN_LCDD4,	GPIO_FN_LCDD5,	GPIO_FN_LCDD6,	GPIO_FN_LCDD7,
+	GPIO_FN_LCDD8,	GPIO_FN_LCDD9,	GPIO_FN_LCDD10,	GPIO_FN_LCDD11,
+	GPIO_FN_LCDD12,	GPIO_FN_LCDD13,	GPIO_FN_LCDD14,	GPIO_FN_LCDD15,
+	GPIO_FN_LCDD16,	GPIO_FN_LCDD17,	GPIO_FN_LCDD18,	GPIO_FN_LCDD19,
+	GPIO_FN_LCDD20,	GPIO_FN_LCDD21,	GPIO_FN_LCDD22,	GPIO_FN_LCDD23,
+
+	/* IRDA		(PORT 139, 140, 141, 142) */
+	GPIO_FN_IRDA_OUT,	GPIO_FN_IRDA_IN,	GPIO_FN_IRDA_FIRSEL,
+	GPIO_FN_IROUT_139,	GPIO_FN_IROUT_140,
+
+	/* TSIF1	(PORT 156, 157, 158, 159) */
+	GPIO_FN_TS0_1SELECT, /* TSIF0 - 1 select */
+	GPIO_FN_TS0_2SELECT, /* TSIF0 - 2 select */
+	GPIO_FN_TS1_1SELECT, /* TSIF1 - 1 select */
+	GPIO_FN_TS1_2SELECT, /* TSIF1 - 2 select */
+
+	GPIO_FN_TS_SPSYNC1,	GPIO_FN_TS_SDAT1,
+	GPIO_FN_TS_SDEN1,	GPIO_FN_TS_SCK1,
+
+	/* TSIF2	(PORT 137, 145, 146, 147) */
+	GPIO_FN_TS_SPSYNC2,	GPIO_FN_TS_SDAT2,
+	GPIO_FN_TS_SDEN2,	GPIO_FN_TS_SCK2,
+
+	/* HDMI		(PORT 169, 170) */
+	GPIO_FN_HDMI_HPD,	GPIO_FN_HDMI_CEC,
+
+	/* SDHI0	(PORT 171, 172, 173, 174, 175, 176, 177, 178) */
+	GPIO_FN_SDHICLK0,	GPIO_FN_SDHICD0,
+	GPIO_FN_SDHICMD0,	GPIO_FN_SDHIWP0,
+	GPIO_FN_SDHID0_0,	GPIO_FN_SDHID0_1,
+	GPIO_FN_SDHID0_2,	GPIO_FN_SDHID0_3,
+
+	/* SDHI1	(PORT 179, 180, 181, 182, 183, 184) */
+	GPIO_FN_SDHICLK1,	GPIO_FN_SDHICMD1,	GPIO_FN_SDHID1_0,
+	GPIO_FN_SDHID1_1,	GPIO_FN_SDHID1_2,	GPIO_FN_SDHID1_3,
+
+	/* SDHI2	(PORT 185, 186, 187, 188, 189, 190) */
+	GPIO_FN_SDHICLK2,	GPIO_FN_SDHICMD2,	GPIO_FN_SDHID2_0,
+	GPIO_FN_SDHID2_1,	GPIO_FN_SDHID2_2,	GPIO_FN_SDHID2_3,
+
+	/* SDENC	see MSEL4CR 19 */
+	GPIO_FN_SDENC_CPG,
+	GPIO_FN_SDENC_DV_CLKI,
+};
+
+#endif /* __ASM_SH7372_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7377.h b/arch/arm/mach-shmobile/include/mach/sh7377.h
new file mode 100644
index 0000000..f580e22
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7377.h
@@ -0,0 +1,360 @@
+#ifndef __ASM_SH7377_H__
+#define __ASM_SH7377_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* 55-1 -> 55-5 (GPIO) */
+	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118,
+
+	GPIO_PORT128, GPIO_PORT129,
+
+	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+
+	GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+	GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
+	GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
+
+	GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
+	GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
+
+	GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
+	GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
+
+	GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
+	GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
+
+	GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
+	GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
+
+	GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
+
+	/* Special Pull-up / Pull-down Functions */
+	GPIO_FN_PORT66_KEYIN0_PU, GPIO_FN_PORT67_KEYIN1_PU,
+	GPIO_FN_PORT68_KEYIN2_PU, GPIO_FN_PORT69_KEYIN3_PU,
+	GPIO_FN_PORT70_KEYIN4_PU, GPIO_FN_PORT71_KEYIN5_PU,
+	GPIO_FN_PORT72_KEYIN6_PU,
+
+	/* 55-1 (FN) */
+	GPIO_FN_VBUS_0,
+	GPIO_FN_CPORT0,
+	GPIO_FN_CPORT1,
+	GPIO_FN_CPORT2,
+	GPIO_FN_CPORT3,
+	GPIO_FN_CPORT4,
+	GPIO_FN_CPORT5,
+	GPIO_FN_CPORT6,
+	GPIO_FN_CPORT7,
+	GPIO_FN_CPORT8,
+	GPIO_FN_CPORT9,
+	GPIO_FN_CPORT10,
+	GPIO_FN_CPORT11, GPIO_FN_SIN2,
+	GPIO_FN_CPORT12, GPIO_FN_XCTS2,
+	GPIO_FN_CPORT13, GPIO_FN_RFSPO4,
+	GPIO_FN_CPORT14, GPIO_FN_RFSPO5,
+	GPIO_FN_CPORT15, GPIO_FN_SCIFA0_SCK, GPIO_FN_GPS_AGC2,
+	GPIO_FN_CPORT16, GPIO_FN_SCIFA0_TXD, GPIO_FN_GPS_AGC3,
+	GPIO_FN_CPORT17_IC_OE, GPIO_FN_SOUT2,
+	GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_PORT19_VIO_CKO2,
+	GPIO_FN_CPORT19_MPORT1,
+	GPIO_FN_CPORT20, GPIO_FN_RFSPO6,
+	GPIO_FN_CPORT21, GPIO_FN_STATUS0,
+	GPIO_FN_CPORT22, GPIO_FN_STATUS1,
+	GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7,
+	GPIO_FN_B_SYNLD1,
+	GPIO_FN_B_SYNLD2, GPIO_FN_SYSENMSK,
+	GPIO_FN_XMAINPS,
+	GPIO_FN_XDIVPS,
+	GPIO_FN_XIDRST,
+	GPIO_FN_IDCLK, GPIO_FN_IC_DP,
+	GPIO_FN_IDIO, GPIO_FN_IC_DM,
+	GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, GPIO_FN_M02_BERDAT,
+	GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
+	GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK,
+	GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS,
+	GPIO_FN_PCMCLKO,
+	GPIO_FN_SYNC8KO,
+
+	/* 55-2 (FN) */
+	GPIO_FN_DNPCM_A,
+	GPIO_FN_UPPCM_A,
+	GPIO_FN_VACK,
+	GPIO_FN_XTALB1L,
+	GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS,
+	GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD,
+	GPIO_FN_GPS_PWRDOWN, GPIO_FN_SCIFA0_CTS,
+	GPIO_FN_GPS_IM,
+	GPIO_FN_GPS_IS,
+	GPIO_FN_GPS_QM,
+	GPIO_FN_GPS_QS,
+	GPIO_FN_FMSOCK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT,
+	GPIO_FN_FMSOOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_IPORT3,
+	GPIO_FN_FMSIOLR,
+	GPIO_FN_FMSOOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_OPORT1,
+	GPIO_FN_FMSIOBT,
+	GPIO_FN_FMSOSLD, GPIO_FN_BBIF2_TXD2, GPIO_FN_OPORT2,
+	GPIO_FN_FMSOILR, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3,
+	GPIO_FN_OPORT3, GPIO_FN_FMSIILR,
+	GPIO_FN_FMSOIBT, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2,
+	GPIO_FN_FMSIIBT,
+	GPIO_FN_FMSISLD, GPIO_FN_MFG0_OUT1, GPIO_FN_TPU0TO0,
+	GPIO_FN_A0_EA0, GPIO_FN_BS,
+	GPIO_FN_A12_EA12, GPIO_FN_PORT58_VIO_CKOR, GPIO_FN_TPU4TO2,
+	GPIO_FN_A13_EA13, GPIO_FN_PORT59_IROUT, GPIO_FN_MFG0_OUT2,
+	GPIO_FN_TPU0TO1,
+	GPIO_FN_A14_EA14, GPIO_FN_PORT60_KEYOUT5,
+	GPIO_FN_A15_EA15, GPIO_FN_PORT61_KEYOUT4,
+	GPIO_FN_A16_EA16, GPIO_FN_PORT62_KEYOUT3, GPIO_FN_MSIOF0_SS1,
+	GPIO_FN_A17_EA17, GPIO_FN_PORT63_KEYOUT2, GPIO_FN_MSIOF0_TSYNC,
+	GPIO_FN_A18_EA18, GPIO_FN_PORT64_KEYOUT1, GPIO_FN_MSIOF0_TSCK,
+	GPIO_FN_A19_EA19, GPIO_FN_PORT65_KEYOUT0, GPIO_FN_MSIOF0_TXD,
+	GPIO_FN_A20_EA20, GPIO_FN_PORT66_KEYIN0, GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_A21_EA21, GPIO_FN_PORT67_KEYIN1, GPIO_FN_MSIOF0_RSYNC,
+	GPIO_FN_A22_EA22, GPIO_FN_PORT68_KEYIN2, GPIO_FN_MSIOF0_MCK0,
+	GPIO_FN_A23_EA23, GPIO_FN_PORT69_KEYIN3, GPIO_FN_MSIOF0_MCK1,
+	GPIO_FN_A24_EA24, GPIO_FN_PORT70_KEYIN4, GPIO_FN_MSIOF0_RXD,
+	GPIO_FN_A25_EA25, GPIO_FN_PORT71_KEYIN5, GPIO_FN_MSIOF0_SS2,
+	GPIO_FN_A26, GPIO_FN_PORT72_KEYIN6,
+	GPIO_FN_D0_ED0_NAF0,
+	GPIO_FN_D1_ED1_NAF1,
+	GPIO_FN_D2_ED2_NAF2,
+	GPIO_FN_D3_ED3_NAF3,
+	GPIO_FN_D4_ED4_NAF4,
+	GPIO_FN_D5_ED5_NAF5,
+	GPIO_FN_D6_ED6_NAF6,
+	GPIO_FN_D7_ED7_NAF7,
+	GPIO_FN_D8_ED8_NAF8,
+	GPIO_FN_D9_ED9_NAF9,
+	GPIO_FN_D10_ED10_NAF10,
+	GPIO_FN_D11_ED11_NAF11,
+	GPIO_FN_D12_ED12_NAF12,
+	GPIO_FN_D13_ED13_NAF13,
+	GPIO_FN_D14_ED14_NAF14,
+	GPIO_FN_D15_ED15_NAF15,
+	GPIO_FN_CS4,
+	GPIO_FN_CS5A, GPIO_FN_FMSICK,
+	GPIO_FN_CS5B, GPIO_FN_FCE1,
+
+	/* 55-3 (FN) */
+	GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_CS6A, GPIO_FN_DACK0,
+	GPIO_FN_FCE0,
+	GPIO_FN_WAIT, GPIO_FN_DREQ0,
+	GPIO_FN_RD_XRD,
+	GPIO_FN_WE0_XWR0_FWE,
+	GPIO_FN_WE1_XWR1,
+	GPIO_FN_FRB,
+	GPIO_FN_CKO,
+	GPIO_FN_NBRSTOUT,
+	GPIO_FN_NBRST,
+	GPIO_FN_GPS_EPPSIN,
+	GPIO_FN_LATCHPULSE,
+	GPIO_FN_LTESIGNAL,
+	GPIO_FN_LEGACYSTATE,
+	GPIO_FN_TCKON,
+	GPIO_FN_VIO_VD, GPIO_FN_PORT128_KEYOUT0, GPIO_FN_IPORT0,
+	GPIO_FN_VIO_HD, GPIO_FN_PORT129_KEYOUT1, GPIO_FN_IPORT1,
+	GPIO_FN_VIO_D0, GPIO_FN_PORT130_KEYOUT2, GPIO_FN_PORT130_MSIOF2_RXD,
+	GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT3, GPIO_FN_PORT131_MSIOF2_SS1,
+	GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT4, GPIO_FN_PORT132_MSIOF2_SS2,
+	GPIO_FN_VIO_D3, GPIO_FN_PORT133_KEYOUT5, GPIO_FN_PORT133_MSIOF2_TSYNC,
+	GPIO_FN_VIO_D4, GPIO_FN_PORT134_KEYIN0, GPIO_FN_PORT134_MSIOF2_TXD,
+	GPIO_FN_VIO_D5, GPIO_FN_PORT135_KEYIN1, GPIO_FN_PORT135_MSIOF2_TSCK,
+	GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYIN2,
+	GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYIN3,
+	GPIO_FN_VIO_D8, GPIO_FN_M9_SLCD_A01, GPIO_FN_PORT138_FSIAOMC,
+	GPIO_FN_VIO_D9, GPIO_FN_M10_SLCD_CK1, GPIO_FN_PORT139_FSIAOLR,
+	GPIO_FN_VIO_D10, GPIO_FN_M11_SLCD_SO1, GPIO_FN_TPU0TO2,
+	GPIO_FN_PORT140_FSIAOBT,
+	GPIO_FN_VIO_D11, GPIO_FN_M12_SLCD_CE1, GPIO_FN_TPU0TO3,
+	GPIO_FN_PORT141_FSIAOSLD,
+	GPIO_FN_VIO_D12, GPIO_FN_M13_BSW, GPIO_FN_PORT142_FSIACK,
+	GPIO_FN_VIO_D13, GPIO_FN_M14_GSW, GPIO_FN_PORT143_FSIAILR,
+	GPIO_FN_VIO_D14, GPIO_FN_M15_RSW, GPIO_FN_PORT144_FSIAIBT,
+	GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_FSIAISLD,
+	GPIO_FN_VIO_CLK, GPIO_FN_PORT146_KEYIN4, GPIO_FN_IPORT2,
+	GPIO_FN_VIO_FIELD, GPIO_FN_PORT147_KEYIN5,
+	GPIO_FN_VIO_CKO, GPIO_FN_PORT148_KEYIN6,
+	GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_MFG0_IN1,
+	GPIO_FN_MFG0_IN2,
+	GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK,
+	GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC,
+	GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1,
+	GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0,
+	GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1,
+	GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT156_MSIOF2_SS2,
+	GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT157_MSIOF2_RXD,
+
+	/* 55-4 (FN) */
+	GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
+	GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI,
+	GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD, GPIO_FN_SOUT0,
+	GPIO_FN_PORT161_SCIFB_CTS, GPIO_FN_PORT161_SCIFA5_CTS, GPIO_FN_XCTS0,
+	GPIO_FN_MFG3_IN2,
+	GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD, GPIO_FN_SIN0,
+	GPIO_FN_MFG3_IN1,
+	GPIO_FN_PORT163_SCIFB_RTS, GPIO_FN_PORT163_SCIFA5_RTS, GPIO_FN_XRTS0,
+	GPIO_FN_MFG3_OUT1,
+	GPIO_FN_TPU3TO0,
+	GPIO_FN_LCDD0, GPIO_FN_PORT192_KEYOUT0, GPIO_FN_EXT_CKI,
+	GPIO_FN_LCDD1, GPIO_FN_PORT193_KEYOUT1, GPIO_FN_PORT193_SCIFA5_CTS,
+	GPIO_FN_BBIF2_TSYNC1,
+	GPIO_FN_LCDD2, GPIO_FN_PORT194_KEYOUT2, GPIO_FN_PORT194_SCIFA5_RTS,
+	GPIO_FN_BBIF2_TSCK1,
+	GPIO_FN_LCDD3, GPIO_FN_PORT195_KEYOUT3, GPIO_FN_PORT195_SCIFA5_RXD,
+	GPIO_FN_BBIF2_TXD1,
+	GPIO_FN_LCDD4, GPIO_FN_PORT196_KEYOUT4, GPIO_FN_PORT196_SCIFA5_TXD,
+	GPIO_FN_LCDD5, GPIO_FN_PORT197_KEYOUT5, GPIO_FN_PORT197_SCIFA5_SCK,
+	GPIO_FN_MFG2_OUT2, GPIO_FN_TPU2TO1,
+	GPIO_FN_LCDD6, GPIO_FN_XWR2,
+	GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3,
+	GPIO_FN_LCDD8, GPIO_FN_PORT200_KEYIN0, GPIO_FN_VIO_DR0, GPIO_FN_D16,
+	GPIO_FN_ED16,
+	GPIO_FN_LCDD9, GPIO_FN_PORT201_KEYIN1, GPIO_FN_VIO_DR1, GPIO_FN_D17,
+	GPIO_FN_ED17,
+	GPIO_FN_LCDD10, GPIO_FN_PORT202_KEYIN2, GPIO_FN_VIO_DR2, GPIO_FN_D18,
+	GPIO_FN_ED18,
+	GPIO_FN_LCDD11, GPIO_FN_PORT203_KEYIN3, GPIO_FN_VIO_DR3, GPIO_FN_D19,
+	GPIO_FN_ED19,
+	GPIO_FN_LCDD12, GPIO_FN_PORT204_KEYIN4, GPIO_FN_VIO_DR4, GPIO_FN_D20,
+	GPIO_FN_ED20,
+	GPIO_FN_LCDD13, GPIO_FN_PORT205_KEYIN5, GPIO_FN_VIO_DR5, GPIO_FN_D21,
+	GPIO_FN_ED21,
+	GPIO_FN_LCDD14, GPIO_FN_PORT206_KEYIN6, GPIO_FN_VIO_DR6, GPIO_FN_D22,
+	GPIO_FN_ED22,
+	GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_PORT207_KEYOUT0,
+	GPIO_FN_VIO_DR7,
+	GPIO_FN_D23, GPIO_FN_ED23,
+	GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_PORT208_KEYOUT1,
+	GPIO_FN_VIO_VDR,
+	GPIO_FN_D24, GPIO_FN_ED24,
+	GPIO_FN_LCDD17, GPIO_FN_PORT209_KEYOUT2, GPIO_FN_VIO_HDR, GPIO_FN_D25,
+	GPIO_FN_ED25,
+	GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26,
+	GPIO_FN_ED26,
+	GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, GPIO_FN_ED27,
+	GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28,
+	GPIO_FN_ED28,
+	GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29,
+	GPIO_FN_ED29,
+	GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30,
+	GPIO_FN_ED30,
+	GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31,
+	GPIO_FN_ED31,
+	GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_PORT216_KEYOUT3,
+	GPIO_FN_VIO_CLKR,
+	GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_TSYNC,
+	GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3,
+	GPIO_FN_PORT218_VIO_CKOR, GPIO_FN_PORT218_KEYOUT4,
+	GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK,
+	GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2, GPIO_FN_PORT220_KEYOUT5,
+	GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD,
+	GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN,
+	GPIO_FN_MSIOF0L_TXD,
+	GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2,
+	GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_USBTERM,
+	GPIO_FN_PORT226_VIO_CKO2,
+	GPIO_FN_SCIFA1_RTS, GPIO_FN_IDIN,
+	GPIO_FN_SCIFA1_RXD,
+	GPIO_FN_SCIFA1_CTS, GPIO_FN_MFG1_IN1,
+	GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2, GPIO_FN_PORT230_FSIAOMC,
+	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2, GPIO_FN_PORT231_FSIAOLR,
+	GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2, GPIO_FN_PORT232_FSIAOBT,
+	GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2, GPIO_FN_GPS_VCOTRIG,
+	GPIO_FN_PORT233_FSIACK,
+	GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2, GPIO_FN_PORT234_FSIAOSLD,
+	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_OPORT0, GPIO_FN_MFG1_IN2,
+	GPIO_FN_PORT235_FSIAILR,
+	GPIO_FN_MSIOF1_MCK0, GPIO_FN_I2C_SDA2, GPIO_FN_PORT236_FSIAIBT,
+	GPIO_FN_MSIOF1_MCK1, GPIO_FN_I2C_SCL2, GPIO_FN_PORT237_FSIAISLD,
+	GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3,
+
+	/* 55-5 (FN) */
+	GPIO_FN_MSIOF1_SS2,
+	GPIO_FN_SCIFA6_TXD,
+	GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1,
+	GPIO_FN_TPU4TO0,
+	GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2,
+	GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2,
+	GPIO_FN_PORT244_SCIFA5_CTS, GPIO_FN_MFG2_IN1, GPIO_FN_PORT244_SCIFB_CTS,
+	GPIO_FN_PORT244_MSIOF2_RXD,
+	GPIO_FN_PORT245_SCIFA5_RTS, GPIO_FN_MFG2_IN2, GPIO_FN_PORT245_SCIFB_RTS,
+	GPIO_FN_PORT245_MSIOF2_TXD,
+	GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1,
+	GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0,
+	GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2,
+	GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1,
+	GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1,
+	GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0,
+	GPIO_FN_PORT248_MSIOF2_TSCK,
+	GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, GPIO_FN_PORT249_MSIOF2_TSYNC,
+	GPIO_FN_SDHICLK0, GPIO_FN_TCK2_SWCLK_MC0,
+	GPIO_FN_SDHICD0,
+	GPIO_FN_SDHID0_0, GPIO_FN_TMS2_SWDIO_MC0,
+	GPIO_FN_SDHID0_1, GPIO_FN_TDO2_SWO0_MC0,
+	GPIO_FN_SDHID0_2, GPIO_FN_TDI2,
+	GPIO_FN_SDHID0_3, GPIO_FN_RTCK2_SWO1_MC0,
+	GPIO_FN_SDHICMD0, GPIO_FN_TRST2,
+	GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2,
+	GPIO_FN_SDHICLK1, GPIO_FN_TCK3_SWCLK_MC1,
+	GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, GPIO_FN_TS_SPSYNC2,
+	GPIO_FN_TMS3_SWDIO_MC1,
+	GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_A02, GPIO_FN_TS_SDAT2,
+	GPIO_FN_TDO3_SWO0_MC1,
+	GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, GPIO_FN_TS_SDEN2, GPIO_FN_TDI3,
+	GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, GPIO_FN_TS_SCK2,
+	GPIO_FN_RTCK3_SWO1_MC1,
+	GPIO_FN_SDHICMD1, GPIO_FN_TRST3,
+	GPIO_FN_RESETOUTS,
+};
+
+#endif /* __ASM_SH7377_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
new file mode 100644
index 0000000..76a687e
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/system.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-shmobile/include/mach/timex.h b/arch/arm/mach-shmobile/include/mach/timex.h
new file mode 100644
index 0000000..ae0d8d8
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MACH_TIMEX_H
+#define __ASM_MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE		1193180 /* unused i8253 PIT value */
+
+#endif /* __ASM_MACH_TIMEX_H */
diff --git a/arch/arm/mach-shmobile/include/mach/uncompress.h b/arch/arm/mach-shmobile/include/mach/uncompress.h
new file mode 100644
index 0000000..0bd7556
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/uncompress.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_MACH_UNCOMPRESS_H
+#define __ASM_MACH_UNCOMPRESS_H
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog()
+
+#endif /* __ASM_MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h
new file mode 100644
index 0000000..fb3c4f1
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MACH_VMALLOC_H
+#define __ASM_MACH_VMALLOC_H
+
+#define VMALLOC_END       (PAGE_OFFSET + 0x24000000)
+
+#endif /* __ASM_MACH_VMALLOC_H */
diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c
new file mode 100644
index 0000000..6a547b4
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7367.c
@@ -0,0 +1,270 @@
+/*
+ * sh7367 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+	UNUSED_INTCA = 0,
+
+	/* interrupt sources INTCA */
+	IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+	IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+	DIRC,
+	CRYPT1_ERR, CRYPT2_STD,
+	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+	ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMRX,
+	ETM11_ACQCMP, ETM11_FULL,
+	MFI_MFIM, MFI_MFIS,
+	BBIF1, BBIF2,
+	USBDMAC_USHDMI,
+	USBHS_USHI0, USBHS_USHI1,
+	CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+	KEYSC_KEY,
+	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+	MSIOF2, MSIOF1,
+	SCIFA4, SCIFA5, SCIFB,
+	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3,
+	SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2, SDHI1_SDHI1I3,
+	MSU_MSU, MSU_MSU2,
+	IREM,
+	SIU,
+	SPU,
+	IRDA,
+	TPU0, TPU1, TPU2, TPU3, TPU4,
+	LCRC,
+	PINT1, PINT2,
+	TTI20,
+	MISTY,
+	DDM,
+	SDHI2_SDHI2I0, SDHI2_SDHI2I1, SDHI2_SDHI2I2, SDHI2_SDHI2I3,
+	RWDT0, RWDT1,
+	DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3,
+	DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR,
+	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+
+	/* interrupt groups INTCA */
+	DMAC_1, DMAC_2,	DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2,
+	ETM11, ARM11, USBHS, FLCTL, IIC1, SDHI0, SDHI1, SDHI2,
+};
+
+static struct intc_vect intca_vectors[] = {
+	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+	INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+	INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+	INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+	INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+	INTC_VECT(DIRC, 0x0560),
+	INTC_VECT(CRYPT1_ERR, 0x05e0),
+	INTC_VECT(CRYPT2_STD, 0x0700),
+	INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+	INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+	INTC_VECT(ARM11_IRQPMU, 0x0800), INTC_VECT(ARM11_COMMTX, 0x0840),
+	INTC_VECT(ARM11_COMMRX, 0x0860),
+	INTC_VECT(ETM11_ACQCMP, 0x0880), INTC_VECT(ETM11_FULL, 0x08a0),
+	INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+	INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+	INTC_VECT(USBDMAC_USHDMI, 0x0a00),
+	INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40),
+	INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+	INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+	INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+	INTC_VECT(KEYSC_KEY, 0x0be0),
+	INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+	INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+	INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+	INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+	INTC_VECT(SCIFB, 0x0d60),
+	INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+	INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20),
+	INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60),
+	INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0),
+	INTC_VECT(SDHI1_SDHI1I2, 0x0ec0), INTC_VECT(SDHI1_SDHI1I3, 0x0ee0),
+	INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40),
+	INTC_VECT(IREM, 0x0f60),
+	INTC_VECT(SIU, 0x0fa0),
+	INTC_VECT(SPU, 0x0fc0),
+	INTC_VECT(IRDA, 0x0480),
+	INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0),
+	INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500),
+	INTC_VECT(TPU4, 0x0520),
+	INTC_VECT(LCRC, 0x0540),
+	INTC_VECT(PINT1, 0x1000), INTC_VECT(PINT2, 0x1020),
+	INTC_VECT(TTI20, 0x1100),
+	INTC_VECT(MISTY, 0x1120),
+	INTC_VECT(DDM, 0x1140),
+	INTC_VECT(SDHI2_SDHI2I0, 0x1200), INTC_VECT(SDHI2_SDHI2I1, 0x1220),
+	INTC_VECT(SDHI2_SDHI2I2, 0x1240), INTC_VECT(SDHI2_SDHI2I3, 0x1260),
+	INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0),
+	INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020),
+	INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060),
+	INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0),
+	INTC_VECT(DMAC_2_DADERR, 0x20c0),
+	INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+	INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+	INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+	INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+	INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+	INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+	INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+	INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+	INTC_GROUP(DMAC_1, DMAC_1_DEI0,
+		   DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3),
+	INTC_GROUP(DMAC_2, DMAC_2_DEI4,
+		   DMAC_2_DEI5, DMAC_2_DADERR),
+	INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+		   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+	INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+		   DMAC2_2_DEI5, DMAC2_2_DADERR),
+	INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+		   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+	INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+		   DMAC3_2_DEI5, DMAC3_2_DADERR),
+	INTC_GROUP(ETM11, ETM11_ACQCMP, ETM11_FULL),
+	INTC_GROUP(ARM11, ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMTX),
+	INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+	INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1,
+		   SDHI0_SDHI0I2, SDHI0_SDHI0I3),
+	INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1,
+		   SDHI1_SDHI1I2, SDHI1_SDHI1I3),
+	INTC_GROUP(SDHI2, SDHI2_SDHI2I0, SDHI2_SDHI2I1,
+		   SDHI2_SDHI2I2, SDHI2_SDHI2I3),
+};
+
+static struct intc_mask_reg intca_mask_registers[] = {
+	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+	    ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } },
+	{ 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+	  { CRYPT1_ERR, CRYPT2_STD, DIRC, 0,
+	    DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } },
+	{ 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+	  { PINT1, PINT2, 0, 0,
+	    BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+	{ 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+	{ 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+	  { DDM, 0, 0, 0,
+	    0, 0, ETM11_FULL, ETM11_ACQCMP } },
+	{ 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+	  { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4,
+	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+	{ 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+	    0, 0, MSIOF2, 0 } },
+	{ 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+	  { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+	{ 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+	  { SDHI1_SDHI1I3, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0,
+	    TTI20, USBDMAC_USHDMI, SPU, SIU } },
+	{ 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+	  { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+	    CMT2, USBHS_USHI1, USBHS_USHI0, 0 } },
+	{ 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+	    0, 0, 0, 0 } },
+	{ 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+	  { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+	    LCRC, MSU_MSU2, IREM, MSU_MSU } },
+	{ 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+	  { 0, 0, TPU0, TPU1,
+	    TPU2, TPU3, TPU4, 0 } },
+	{ 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+	  { SDHI2_SDHI2I3, SDHI2_SDHI2I2, SDHI2_SDHI2I1, SDHI2_SDHI2I0,
+	    MISTY, CMT3, RWDT1, RWDT0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] = {
+	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+
+	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
+	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } },
+	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD,
+					      CMT1_CMT11, ARM11 } },
+	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { PINT1, PINT2,
+					      CMT1_CMT12, TPU4 } },
+	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS,
+					      MFI_MFIM, USBHS } },
+	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2,
+					      0, CMT1_CMT10 } },
+	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+					      SCIFA2, SCIFA3 } },
+	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI,
+					      FLCTL, SDHI0 } },
+	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } },
+	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, SIU, TTI20 } },
+	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IREM, SDHI1 } },
+	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } },
+	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } },
+	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, SPU, DDM } },
+	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+	{ 0xe6900000, 16, 2, /* ICR1A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900004, 16, 2, /* ICR2A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+	{ 0xe6900020, 0, 8, /* INTREQ00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900024, 0, 8, /* INTREQ10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+};
+
+static DECLARE_INTC_DESC_ACK(intca_desc, "sh7367-intca",
+			     intca_vectors, intca_groups,
+			     intca_mask_registers, intca_prio_registers,
+			     intca_sense_registers, intca_ack_registers);
+
+void __init sh7367_init_irq(void)
+{
+	/* INTCA */
+	register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
new file mode 100644
index 0000000..c57a923
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -0,0 +1,369 @@
+/*
+ * sh7372 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+	UNUSED_INTCA = 0,
+
+	/* interrupt sources INTCA */
+	IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+	IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+	IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
+	IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
+	DIRC,
+	CRYPT_STD,
+	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+	AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX,
+	MFI_MFIM, MFI_MFIS,
+	BBIF1, BBIF2,
+	USBHSDMAC0_USHDMI,
+	_3DG_SGX540,
+	CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+	KEYSC_KEY,
+	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+	MSIOF2, MSIOF1,
+	SCIFA4, SCIFA5, SCIFB,
+	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3,
+	SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2,
+	IRREM,
+	IRDA,
+	TPU0,
+	TTI20,
+	DDM,
+	SDHI2_SDHI2I0, SDHI2_SDHI2I1, SDHI2_SDHI2I2, SDHI2_SDHI2I3,
+	RWDT0,
+	DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3,
+	DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR,
+	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+	SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
+	HDMI,
+	SPU2_SPU0, SPU2_SPU1,
+	FSI, FMSI,
+	MIPI_HSI,
+	IPMMU_IPMMUD,
+	CEC_1, CEC_2,
+	AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ,
+	MFIS2,
+	CPORTR2S,
+	CMT14, CMT15,
+	MMC_MMC_ERR, MMC_MMC_NOR,
+	IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
+	IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3,
+	USB0_USB0I1, USB0_USB0I0,
+	USB1_USB1I1, USB1_USB1I0,
+	USBHSDMAC1_USHDMI,
+
+	/* interrupt groups INTCA */
+	DMAC1_1, DMAC1_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT,
+	AP_ARM1, AP_ARM2, SPU2, FLCTL, IIC1, SDHI0, SDHI1, SDHI2
+};
+
+static struct intc_vect intca_vectors[] __initdata = {
+	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+	INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+	INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+	INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+	INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+	INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
+	INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
+	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+	INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
+	INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
+	INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
+	INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
+	INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
+	INTC_VECT(DIRC, 0x0560),
+	INTC_VECT(CRYPT_STD, 0x0700),
+	INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+	INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+	INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840),
+	INTC_VECT(AP_ARM_COMMRX, 0x0860),
+	INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+	INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+	INTC_VECT(USBHSDMAC0_USHDMI, 0x0a00),
+	INTC_VECT(_3DG_SGX540, 0x0a60),
+	INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+	INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+	INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+	INTC_VECT(KEYSC_KEY, 0x0be0),
+	INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+	INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+	INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+	INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+	INTC_VECT(SCIFB, 0x0d60),
+	INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+	INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20),
+	INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60),
+	INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0),
+	INTC_VECT(SDHI1_SDHI1I2, 0x0ec0),
+	INTC_VECT(IRREM, 0x0f60),
+	INTC_VECT(IRDA, 0x0480),
+	INTC_VECT(TPU0, 0x04a0),
+	INTC_VECT(TTI20, 0x1100),
+	INTC_VECT(DDM, 0x1140),
+	INTC_VECT(SDHI2_SDHI2I0, 0x1200), INTC_VECT(SDHI2_SDHI2I1, 0x1220),
+	INTC_VECT(SDHI2_SDHI2I2, 0x1240), INTC_VECT(SDHI2_SDHI2I3, 0x1260),
+	INTC_VECT(RWDT0, 0x1280),
+	INTC_VECT(DMAC1_1_DEI0, 0x2000), INTC_VECT(DMAC1_1_DEI1, 0x2020),
+	INTC_VECT(DMAC1_1_DEI2, 0x2040), INTC_VECT(DMAC1_1_DEI3, 0x2060),
+	INTC_VECT(DMAC1_2_DEI4, 0x2080), INTC_VECT(DMAC1_2_DEI5, 0x20a0),
+	INTC_VECT(DMAC1_2_DADERR, 0x20c0),
+	INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+	INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+	INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+	INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+	INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+	INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+	INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+	INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+	INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1320),
+	INTC_VECT(SHWYSTAT_COM, 0x1340),
+	INTC_VECT(HDMI, 0x17e0),
+	INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820),
+	INTC_VECT(FSI, 0x1840),
+	INTC_VECT(FMSI, 0x1860),
+	INTC_VECT(MIPI_HSI, 0x18e0),
+	INTC_VECT(IPMMU_IPMMUD, 0x1920),
+	INTC_VECT(CEC_1, 0x1940), INTC_VECT(CEC_2, 0x1960),
+	INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
+	INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0),
+	INTC_VECT(AP_ARM_DMAIRQ, 0x19c0),
+	INTC_VECT(AP_ARM_DMASIRQ, 0x19e0),
+	INTC_VECT(MFIS2, 0x1a00),
+	INTC_VECT(CPORTR2S, 0x1a20),
+	INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60),
+	INTC_VECT(MMC_MMC_ERR, 0x1ac0), INTC_VECT(MMC_MMC_NOR, 0x1ae0),
+	INTC_VECT(IIC4_ALI4, 0x1b00), INTC_VECT(IIC4_TACKI4, 0x1b20),
+	INTC_VECT(IIC4_WAITI4, 0x1b40), INTC_VECT(IIC4_DTEI4, 0x1b60),
+	INTC_VECT(IIC3_ALI3, 0x1b80), INTC_VECT(IIC3_TACKI3, 0x1ba0),
+	INTC_VECT(IIC3_WAITI3, 0x1bc0), INTC_VECT(IIC3_DTEI3, 0x1be0),
+	INTC_VECT(USB0_USB0I1, 0x1c80), INTC_VECT(USB0_USB0I0, 0x1ca0),
+	INTC_VECT(USB1_USB1I1, 0x1cc0), INTC_VECT(USB1_USB1I0, 0x1ce0),
+	INTC_VECT(USBHSDMAC1_USHDMI, 0x1d00),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+	INTC_GROUP(DMAC1_1, DMAC1_1_DEI0,
+		   DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3),
+	INTC_GROUP(DMAC1_2, DMAC1_2_DEI4,
+		   DMAC1_2_DEI5, DMAC1_2_DADERR),
+	INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+		   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+	INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+		   DMAC2_2_DEI5, DMAC2_2_DADERR),
+	INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+		   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+	INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+		   DMAC3_2_DEI5, DMAC3_2_DADERR),
+	INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX),
+	INTC_GROUP(AP_ARM2, AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+		   AP_ARM_DMAIRQ, AP_ARM_DMASIRQ),
+	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+	INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1,
+		   SDHI0_SDHI0I2, SDHI0_SDHI0I3),
+	INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1,
+		   SDHI1_SDHI1I2),
+	INTC_GROUP(SDHI2, SDHI2_SDHI2I0, SDHI2_SDHI2I1,
+		   SDHI2_SDHI2I2, SDHI2_SDHI2I3),
+	INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
+};
+
+static struct intc_mask_reg intca_mask_registers[] __initdata = {
+	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+	    AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
+	{ 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+	  { 0, CRYPT_STD, DIRC, 0,
+	    DMAC1_1_DEI3, DMAC1_1_DEI2, DMAC1_1_DEI1, DMAC1_1_DEI0 } },
+	{ 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+	  { 0, 0, 0, 0,
+	    BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+	{ 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+	{ 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+	  { DDM, 0, 0, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+	  { KEYSC_KEY, DMAC1_2_DADERR, DMAC1_2_DEI5, DMAC1_2_DEI4,
+	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+	{ 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+	    0, 0, MSIOF2, 0 } },
+	{ 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+	  { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+	{ 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+	  { 0, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0,
+	    TTI20, USBHSDMAC0_USHDMI, 0, 0 } },
+	{ 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+	  { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+	    CMT2, 0, 0, _3DG_SGX540 } },
+	{ 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+	    0, 0, 0, 0 } },
+	{ 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+	  { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+	    0, 0, IRREM, 0 } },
+	{ 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+	  { 0, 0, TPU0, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+	  { SDHI2_SDHI2I3, SDHI2_SDHI2I2, SDHI2_SDHI2I1, SDHI2_SDHI2I0,
+	    0, CMT3, 0, RWDT0 } },
+	{ 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */
+	  { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */
+	  { 0, 0, 0, 0,
+	    0, 0, 0, HDMI } },
+	{ 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */
+	  { SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
+	    0, 0, 0, MIPI_HSI } },
+	{ 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */
+	  { 0, IPMMU_IPMMUD, CEC_1, CEC_2,
+	    AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+	    AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } },
+	{ 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */
+	  { MFIS2, CPORTR2S, CMT14, CMT15,
+	    0, 0, MMC_MMC_ERR, MMC_MMC_NOR } },
+	{ 0xe69500a0, 0xe69500e0, 8, /* IMR8A3 / IMCR8A3 */
+	  { IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
+	    IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3 } },
+	{ 0xe69500a4, 0xe69500e4, 8, /* IMR9A3 / IMCR9A3 */
+	  { 0, 0, 0, 0,
+	    USB0_USB0I1, USB0_USB0I0, USB1_USB1I1, USB1_USB1I0 } },
+	{ 0xe69500a8, 0xe69500e8, 8, /* IMR10A3 / IMCR10A3 */
+	  { USBHSDMAC1_USHDMI, 0, 0, 0,
+	    0, 0, 0, 0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] __initdata = {
+	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900018, 0, 32, 4, /* INTPRI20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690001c, 0, 32, 4, /* INTPRI30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, 0 } },
+	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
+	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { 0, CRYPT_STD,
+					      CMT1_CMT11, AP_ARM1 } },
+	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { 0, 0,
+					      CMT1_CMT12, 0 } },
+	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC1_1, MFI_MFIS,
+					      MFI_MFIM, 0 } },
+	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC1_2,
+					      _3DG_SGX540, CMT1_CMT10 } },
+	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+					      SCIFA2, SCIFA3 } },
+	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBHSDMAC0_USHDMI,
+					      FLCTL, SDHI0 } },
+	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4,
+					      0/* MSU */, IIC1 } },
+	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2,
+					      0/* MSUG */, TTI20 } },
+	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } },
+	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, 0, 0, 0 } },
+	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { 0, CMT3, 0, RWDT0 } },
+	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
+	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
+	{ 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
+	{ 0xe6950024, 0, 16, 4, /* IPRJA3 */ { 0, 0, 0, HDMI } },
+	{ 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
+	{ 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, 0, 0, MIPI_HSI } },
+	{ 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUD, 0,
+					       CEC_1, CEC_2 } },
+	{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
+	{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
+					       CMT14, CMT15 } },
+	{ 0xe694003c, 0, 16, 4, /* IPRPA3 */ { 0, 0,
+					       MMC_MMC_ERR, MMC_MMC_NOR } },
+	{ 0xe6940040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4,
+					       IIC4_WAITI4, IIC4_DTEI4 } },
+	{ 0xe6940044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3,
+					       IIC3_WAITI3, IIC3_DTEI3 } },
+	{ 0xe6940048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/,
+					       0/*TXI*/, 0/*TEI*/} },
+	{ 0xe694004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0,
+					       USB1_USB1I1, USB1_USB1I0 } },
+	{ 0xe6940050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+	{ 0xe6900000, 32, 4, /* ICR1A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900004, 32, 4, /* ICR2A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900008, 32, 4, /* ICR3A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690000c, 32, 4, /* ICR4A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+	{ 0xe6900020, 0, 8, /* INTREQ00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900024, 0, 8, /* INTREQ10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900028, 0, 8, /* INTREQ20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690002c, 0, 8, /* INTREQ30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static DECLARE_INTC_DESC_ACK(intca_desc, "sh7372-intca",
+			     intca_vectors, intca_groups,
+			     intca_mask_registers, intca_prio_registers,
+			     intca_sense_registers, intca_ack_registers);
+
+void __init sh7372_init_irq(void)
+{
+	register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c
new file mode 100644
index 0000000..125021c
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7377.c
@@ -0,0 +1,350 @@
+/*
+ * sh7377 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+	UNUSED_INTCA = 0,
+
+	/* interrupt sources INTCA */
+	IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+	IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+	IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
+	IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
+	DIRC,
+	_2DG,
+	CRYPT_STD,
+	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+	AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX,
+	MFI_MFIM, MFI_MFIS,
+	BBIF1, BBIF2,
+	USBDMAC_USHDMI,
+	USBHS_USHI0, USBHS_USHI1,
+	_3DG_SGX540,
+	CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+	KEYSC_KEY,
+	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+	MSIOF2, MSIOF1,
+	SCIFA4, SCIFA5, SCIFB,
+	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3,
+	SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2, SDHI1_SDHI1I3,
+	MSU_MSU, MSU_MSU2,
+	IRREM,
+	MSUG,
+	IRDA,
+	TPU0, TPU1, TPU2, TPU3, TPU4,
+	LCRC,
+	PINTCA_PINT1, PINTCA_PINT2,
+	TTI20,
+	MISTY,
+	DDM,
+	RWDT0, RWDT1,
+	DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3,
+	DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR,
+	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+	SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
+	ICUSB_ICUSB0, ICUSB_ICUSB1,
+	ICUDMC_ICUDMC1, ICUDMC_ICUDMC2,
+	SPU2_SPU0, SPU2_SPU1,
+	FSI,
+	FMSI,
+	SCUV,
+	IPMMU_IPMMUB,
+	AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ,
+	MFIS2,
+	CPORTR2S,
+	CMT14, CMT15,
+	SCIFA6,
+
+	/* interrupt groups INTCA */
+	DMAC_1, DMAC_2,	DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT,
+	AP_ARM1, AP_ARM2, USBHS, SPU2, FLCTL, IIC1, SDHI0, SDHI1,
+	ICUSB, ICUDMC
+};
+
+static struct intc_vect intca_vectors[] = {
+	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+	INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+	INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+	INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+	INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+	INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
+	INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
+	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+	INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
+	INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
+	INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
+	INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
+	INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
+	INTC_VECT(DIRC, 0x0560),
+	INTC_VECT(_2DG, 0x05e0),
+	INTC_VECT(CRYPT_STD, 0x0700),
+	INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+	INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+	INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840),
+	INTC_VECT(AP_ARM_COMMRX, 0x0860),
+	INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+	INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+	INTC_VECT(USBDMAC_USHDMI, 0x0a00),
+	INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40),
+	INTC_VECT(_3DG_SGX540, 0x0a60),
+	INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+	INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+	INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+	INTC_VECT(KEYSC_KEY, 0x0be0),
+	INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+	INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+	INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+	INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+	INTC_VECT(SCIFB, 0x0d60),
+	INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+	INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20),
+	INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60),
+	INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0),
+	INTC_VECT(SDHI1_SDHI1I2, 0x0ec0), INTC_VECT(SDHI1_SDHI1I3, 0x0ee0),
+	INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40),
+	INTC_VECT(IRREM, 0x0f60),
+	INTC_VECT(MSUG, 0x0fa0),
+	INTC_VECT(IRDA, 0x0480),
+	INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0),
+	INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500),
+	INTC_VECT(TPU4, 0x0520),
+	INTC_VECT(LCRC, 0x0540),
+	INTC_VECT(PINTCA_PINT1, 0x1000), INTC_VECT(PINTCA_PINT2, 0x1020),
+	INTC_VECT(TTI20, 0x1100),
+	INTC_VECT(MISTY, 0x1120),
+	INTC_VECT(DDM, 0x1140),
+	INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0),
+	INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020),
+	INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060),
+	INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0),
+	INTC_VECT(DMAC_2_DADERR, 0x20c0),
+	INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+	INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+	INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+	INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+	INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+	INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+	INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+	INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+	INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1d20),
+	INTC_VECT(SHWYSTAT_COM, 0x1340),
+	INTC_VECT(ICUSB_ICUSB0, 0x1700), INTC_VECT(ICUSB_ICUSB1, 0x1720),
+	INTC_VECT(ICUDMC_ICUDMC1, 0x1780), INTC_VECT(ICUDMC_ICUDMC2, 0x17a0),
+	INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820),
+	INTC_VECT(FSI, 0x1840),
+	INTC_VECT(FMSI, 0x1860),
+	INTC_VECT(SCUV, 0x1880),
+	INTC_VECT(IPMMU_IPMMUB, 0x1900),
+	INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
+	INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0),
+	INTC_VECT(AP_ARM_DMAIRQ, 0x19c0),
+	INTC_VECT(AP_ARM_DMASIRQ, 0x19e0),
+	INTC_VECT(MFIS2, 0x1a00),
+	INTC_VECT(CPORTR2S, 0x1a20),
+	INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60),
+	INTC_VECT(SCIFA6, 0x1a80),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+	INTC_GROUP(DMAC_1, DMAC_1_DEI0,
+		   DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3),
+	INTC_GROUP(DMAC_2, DMAC_2_DEI4,
+		   DMAC_2_DEI5, DMAC_2_DADERR),
+	INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+		   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+	INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+		   DMAC2_2_DEI5, DMAC2_2_DADERR),
+	INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+		   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+	INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+		   DMAC3_2_DEI5, DMAC3_2_DADERR),
+	INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMTX),
+	INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1),
+	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+	INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1,
+		   SDHI0_SDHI0I2, SDHI0_SDHI0I3),
+	INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1,
+		   SDHI1_SDHI1I2, SDHI1_SDHI1I3),
+	INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
+	INTC_GROUP(ICUSB, ICUSB_ICUSB0, ICUSB_ICUSB1),
+	INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2),
+};
+
+static struct intc_mask_reg intca_mask_registers[] = {
+	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+	    AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
+	{ 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+	  { _2DG, CRYPT_STD, DIRC, 0,
+	    DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } },
+	{ 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+	  { PINTCA_PINT1, PINTCA_PINT2, 0, 0,
+	    BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+	{ 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+	{ 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+	  { DDM, 0, 0, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+	  { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4,
+	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+	{ 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+	    0, 0, MSIOF2, 0 } },
+	{ 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+	  { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+	{ 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+	  { SDHI1_SDHI1I3, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0,
+	    TTI20, USBDMAC_USHDMI, 0, MSUG } },
+	{ 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+	  { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+	    CMT2, USBHS_USHI1, USBHS_USHI0, _3DG_SGX540 } },
+	{ 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+	    0, 0, 0, 0 } },
+	{ 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+	  { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+	    LCRC, MSU_MSU2, IRREM, MSU_MSU } },
+	{ 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+	  { 0, 0, TPU0, TPU1,
+	    TPU2, TPU3, TPU4, 0 } },
+	{ 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+	  { 0, 0, 0, 0,
+	    MISTY, CMT3, RWDT1, RWDT0 } },
+	{ 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */
+	  { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */
+	  { ICUSB_ICUSB0, ICUSB_ICUSB1, 0, 0,
+	    ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, 0, 0 } },
+	{ 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */
+	  { SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
+	    SCUV, 0, 0, 0 } },
+	{ 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */
+	  { IPMMU_IPMMUB, 0, 0, 0,
+	    AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+	    AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } },
+	{ 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */
+	  { MFIS2, CPORTR2S, CMT14, CMT15,
+	    SCIFA6, 0, 0, 0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] = {
+	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900018, 0, 32, 4, /* INTPRI10A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690001c, 0, 32, 4, /* INTPRI30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
+	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
+	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD,
+					      CMT1_CMT11, AP_ARM1 } },
+	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { PINTCA_PINT1, PINTCA_PINT2,
+					      CMT1_CMT12, TPU4 } },
+	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS,
+					      MFI_MFIM, USBHS } },
+	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2,
+					      _3DG_SGX540, CMT1_CMT10 } },
+	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+					      SCIFA2, SCIFA3 } },
+	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI,
+					      FLCTL, SDHI0 } },
+	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } },
+	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, MSUG, TTI20 } },
+	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } },
+	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } },
+	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } },
+	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
+	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, 0 } },
+	{ 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
+	{ 0xe6950020, 0, 16, 4, /* IPRIA3 */ { ICUSB, 0, 0, 0 } },
+	{ 0xe6950024, 0, 16, 4, /* IPRJA3 */ { ICUDMC, 0, 0, 0 } },
+	{ 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
+	{ 0xe695002c, 0, 16, 4, /* IPRLA3 */ { SCUV, 0, 0, 0 } },
+	{ 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUB, 0, 0, 0 } },
+	{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
+	{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
+					       CMT14, CMT15 } },
+	{ 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+	{ 0xe6900000, 16, 2, /* ICR1A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900004, 16, 2, /* ICR2A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900008, 16, 2, /* ICR3A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690000c, 16, 2, /* ICR4A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+	{ 0xe6900020, 0, 8, /* INTREQ00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900024, 0, 8, /* INTREQ10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900028, 0, 8, /* INTREQ20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690002c, 0, 8, /* INTREQ30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static DECLARE_INTC_DESC_ACK(intca_desc, "sh7377-intca",
+			     intca_vectors, intca_groups,
+			     intca_mask_registers, intca_prio_registers,
+			     intca_sense_registers, intca_ack_registers);
+
+void __init sh7377_init_irq(void)
+{
+	register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c
new file mode 100644
index 0000000..128555e
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7367.c
@@ -0,0 +1,1801 @@
+/*
+ * sh7367 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7367.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx)				\
+	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
+	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
+	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
+	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
+	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _90(fn, pfx, sfx)				\
+	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
+	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
+	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
+	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
+	_10(fn, pfx##9, sfx)
+
+#define _273(fn, pfx, sfx)		\
+	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
+	_10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx),	\
+	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
+	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
+	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
+	_10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx),	\
+	_1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_273(str) _273(_PORT, PORT, str)
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PORT_273(IN), /* PORT0_IN -> PORT272_IN */
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_INPUT_PULLDOWN_BEGIN,
+	PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
+	PINMUX_INPUT_PULLDOWN_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
+	PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
+	PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */
+	PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */
+	PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */
+	PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */
+	PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */
+	PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */
+	PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */
+	PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */
+
+	MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	/* Special Pull-up / Pull-down Functions */
+	PORT48_KEYIN0_PU_MARK, PORT49_KEYIN1_PU_MARK,
+	PORT50_KEYIN2_PU_MARK, PORT55_KEYIN3_PU_MARK,
+	PORT56_KEYIN4_PU_MARK, PORT57_KEYIN5_PU_MARK,
+	PORT58_KEYIN6_PU_MARK,
+
+	/* 49-1 */
+	VBUS0_MARK, CPORT0_MARK, CPORT1_MARK, CPORT2_MARK,
+	CPORT3_MARK, CPORT4_MARK, CPORT5_MARK, CPORT6_MARK,
+	CPORT7_MARK, CPORT8_MARK, CPORT9_MARK, CPORT10_MARK,
+	CPORT11_MARK, SIN2_MARK, CPORT12_MARK, XCTS2_MARK,
+	CPORT13_MARK, RFSPO4_MARK, CPORT14_MARK, RFSPO5_MARK,
+	CPORT15_MARK, CPORT16_MARK, CPORT17_MARK, SOUT2_MARK,
+	CPORT18_MARK, XRTS2_MARK, CPORT19_MARK, CPORT20_MARK,
+	RFSPO6_MARK, CPORT21_MARK, STATUS0_MARK, CPORT22_MARK,
+	STATUS1_MARK, CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK,
+	MPORT0_MARK, MPORT1_MARK, B_SYNLD1_MARK, B_SYNLD2_MARK,
+	XMAINPS_MARK, XDIVPS_MARK, XIDRST_MARK, IDCLK_MARK,
+	IDIO_MARK, SOUT1_MARK, SCIFA4_TXD_MARK,
+	M02_BERDAT_MARK, SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK,
+	XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK,
+	XCTS1_MARK, SCIFA4_CTS_MARK,
+
+	/* 49-2 */
+	HSU_IQ_AGC6_MARK, MFG2_IN2_MARK, MSIOF2_MCK0_MARK,
+	HSU_IQ_AGC5_MARK, MFG2_IN1_MARK, MSIOF2_MCK1_MARK,
+	HSU_IQ_AGC4_MARK, MSIOF2_RSYNC_MARK,
+	HSU_IQ_AGC3_MARK, MFG2_OUT1_MARK, MSIOF2_RSCK_MARK,
+	HSU_IQ_AGC2_MARK, PORT42_KEYOUT0_MARK,
+	HSU_IQ_AGC1_MARK, PORT43_KEYOUT1_MARK,
+	HSU_IQ_AGC0_MARK, PORT44_KEYOUT2_MARK,
+	HSU_IQ_AGC_ST_MARK, PORT45_KEYOUT3_MARK,
+	HSU_IQ_PDO_MARK, PORT46_KEYOUT4_MARK,
+	HSU_IQ_PYO_MARK, PORT47_KEYOUT5_MARK,
+	HSU_EN_TXMUX_G3MO_MARK, PORT48_KEYIN0_MARK,
+	HSU_I_TXMUX_G3MO_MARK, PORT49_KEYIN1_MARK,
+	HSU_Q_TXMUX_G3MO_MARK, PORT50_KEYIN2_MARK,
+	HSU_SYO_MARK, PORT51_MSIOF2_TSYNC_MARK,
+	HSU_SDO_MARK, PORT52_MSIOF2_TSCK_MARK,
+	HSU_TGTTI_G3MO_MARK, PORT53_MSIOF2_TXD_MARK,
+	B_TIME_STAMP_MARK, PORT54_MSIOF2_RXD_MARK,
+	HSU_SDI_MARK, PORT55_KEYIN3_MARK,
+	HSU_SCO_MARK, PORT56_KEYIN4_MARK,
+	HSU_DREQ_MARK, PORT57_KEYIN5_MARK,
+	HSU_DACK_MARK, PORT58_KEYIN6_MARK,
+	HSU_CLK61M_MARK, PORT59_MSIOF2_SS1_MARK,
+	HSU_XRST_MARK, PORT60_MSIOF2_SS2_MARK,
+	PCMCLKO_MARK, SYNC8KO_MARK, DNPCM_A_MARK, UPPCM_A_MARK,
+	XTALB1L_MARK,
+	GPS_AGC1_MARK, SCIFA0_RTS_MARK,
+	GPS_AGC2_MARK, SCIFA0_SCK_MARK,
+	GPS_AGC3_MARK, SCIFA0_TXD_MARK,
+	GPS_AGC4_MARK, SCIFA0_RXD_MARK,
+	GPS_PWRD_MARK, SCIFA0_CTS_MARK,
+	GPS_IM_MARK, GPS_IS_MARK, GPS_QM_MARK, GPS_QS_MARK,
+	SIUBOMC_MARK, TPU2TO0_MARK,
+	SIUCKB_MARK, TPU2TO1_MARK,
+	SIUBOLR_MARK, BBIF2_TSYNC_MARK, TPU2TO2_MARK,
+	SIUBOBT_MARK, BBIF2_TSCK_MARK, TPU2TO3_MARK,
+	SIUBOSLD_MARK, BBIF2_TXD_MARK, TPU3TO0_MARK,
+	SIUBILR_MARK, TPU3TO1_MARK,
+	SIUBIBT_MARK, TPU3TO2_MARK,
+	SIUBISLD_MARK, TPU3TO3_MARK,
+	NMI_MARK, TPU4TO0_MARK,
+	DNPCM_M_MARK, TPU4TO1_MARK, TPU4TO2_MARK, TPU4TO3_MARK,
+	IRQ_TMPB_MARK,
+	PWEN_MARK, MFG1_OUT1_MARK,
+	OVCN_MARK, MFG1_IN1_MARK,
+	OVCN2_MARK, MFG1_IN2_MARK,
+
+	/* 49-3 */
+	RFSPO1_MARK, RFSPO2_MARK, RFSPO3_MARK, PORT93_VIO_CKO2_MARK,
+	USBTERM_MARK, EXTLP_MARK, IDIN_MARK,
+	SCIFA5_CTS_MARK, MFG0_IN1_MARK,
+	SCIFA5_RTS_MARK, MFG0_IN2_MARK,
+	SCIFA5_RXD_MARK,
+	SCIFA5_TXD_MARK,
+	SCIFA5_SCK_MARK, MFG0_OUT1_MARK,
+	A0_EA0_MARK, BS_MARK,
+	A14_EA14_MARK, PORT102_KEYOUT0_MARK,
+	A15_EA15_MARK, PORT103_KEYOUT1_MARK, DV_CLKOL_MARK,
+	A16_EA16_MARK, PORT104_KEYOUT2_MARK,
+	DV_VSYNCL_MARK, MSIOF0_SS1_MARK,
+	A17_EA17_MARK, PORT105_KEYOUT3_MARK,
+	DV_HSYNCL_MARK, MSIOF0_TSYNC_MARK,
+	A18_EA18_MARK, PORT106_KEYOUT4_MARK,
+	DV_DL0_MARK, MSIOF0_TSCK_MARK,
+	A19_EA19_MARK, PORT107_KEYOUT5_MARK,
+	DV_DL1_MARK, MSIOF0_TXD_MARK,
+	A20_EA20_MARK, PORT108_KEYIN0_MARK,
+	DV_DL2_MARK, MSIOF0_RSCK_MARK,
+	A21_EA21_MARK, PORT109_KEYIN1_MARK,
+	DV_DL3_MARK, MSIOF0_RSYNC_MARK,
+	A22_EA22_MARK, PORT110_KEYIN2_MARK,
+	DV_DL4_MARK, MSIOF0_MCK0_MARK,
+	A23_EA23_MARK, PORT111_KEYIN3_MARK,
+	DV_DL5_MARK, MSIOF0_MCK1_MARK,
+	A24_EA24_MARK, PORT112_KEYIN4_MARK,
+	DV_DL6_MARK, MSIOF0_RXD_MARK,
+	A25_EA25_MARK, PORT113_KEYIN5_MARK,
+	DV_DL7_MARK, MSIOF0_SS2_MARK,
+	A26_MARK, PORT113_KEYIN6_MARK, DV_CLKIL_MARK,
+	D0_ED0_NAF0_MARK, D1_ED1_NAF1_MARK, D2_ED2_NAF2_MARK,
+	D3_ED3_NAF3_MARK, D4_ED4_NAF4_MARK, D5_ED5_NAF5_MARK,
+	D6_ED6_NAF6_MARK, D7_ED7_NAF7_MARK, D8_ED8_NAF8_MARK,
+	D9_ED9_NAF9_MARK, D10_ED10_NAF10_MARK, D11_ED11_NAF11_MARK,
+	D12_ED12_NAF12_MARK, D13_ED13_NAF13_MARK,
+	D14_ED14_NAF14_MARK, D15_ED15_NAF15_MARK,
+	CS4_MARK, CS5A_MARK, CS5B_MARK, FCE1_MARK,
+	CS6B_MARK, XCS2_MARK, FCE0_MARK, CS6A_MARK,
+	DACK0_MARK, WAIT_MARK, DREQ0_MARK, RD_XRD_MARK,
+	A27_MARK, RDWR_XWE_MARK, WE0_XWR0_FWE_MARK,
+	WE1_XWR1_MARK, FRB_MARK, CKO_MARK,
+	NBRSTOUT_MARK, NBRST_MARK,
+
+	/* 49-4 */
+	RFSPO0_MARK, PORT146_VIO_CKO2_MARK, TSTMD_MARK,
+	VIO_VD_MARK, VIO_HD_MARK,
+	VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK,
+	VIO_D3_MARK, VIO_D4_MARK, VIO_D5_MARK,
+	VIO_D6_MARK, VIO_D7_MARK, VIO_D8_MARK,
+	VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK,
+	VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK,
+	VIO_D15_MARK, VIO_CLK_MARK, VIO_FIELD_MARK,
+	VIO_CKO_MARK,
+	MFG3_IN1_MARK, MFG3_IN2_MARK,
+	M9_SLCD_A01_MARK, MFG3_OUT1_MARK, TPU0TO0_MARK,
+	M10_SLCD_CK1_MARK, MFG4_IN1_MARK, TPU0TO1_MARK,
+	M11_SLCD_SO1_MARK, MFG4_IN2_MARK, TPU0TO2_MARK,
+	M12_SLCD_CE1_MARK, MFG4_OUT1_MARK, TPU0TO3_MARK,
+	LCDD0_MARK, PORT175_KEYOUT0_MARK, DV_D0_MARK,
+	SIUCKA_MARK, MFG0_OUT2_MARK,
+	LCDD1_MARK, PORT176_KEYOUT1_MARK, DV_D1_MARK,
+	SIUAOLR_MARK, BBIF2_TSYNC1_MARK,
+	LCDD2_MARK, PORT177_KEYOUT2_MARK, DV_D2_MARK,
+	SIUAOBT_MARK, BBIF2_TSCK1_MARK,
+	LCDD3_MARK, PORT178_KEYOUT3_MARK, DV_D3_MARK,
+	SIUAOSLD_MARK, BBIF2_TXD1_MARK,
+	LCDD4_MARK, PORT179_KEYOUT4_MARK, DV_D4_MARK,
+	SIUAISPD_MARK, MFG1_OUT2_MARK,
+	LCDD5_MARK, PORT180_KEYOUT5_MARK, DV_D5_MARK,
+	SIUAILR_MARK, MFG2_OUT2_MARK,
+	LCDD6_MARK, DV_D6_MARK,
+	SIUAIBT_MARK, MFG3_OUT2_MARK, XWR2_MARK,
+	LCDD7_MARK, DV_D7_MARK,
+	SIUAISLD_MARK, MFG4_OUT2_MARK, XWR3_MARK,
+	LCDD8_MARK, DV_D8_MARK, D16_MARK, ED16_MARK,
+	LCDD9_MARK, DV_D9_MARK, D17_MARK, ED17_MARK,
+	LCDD10_MARK, DV_D10_MARK, D18_MARK, ED18_MARK,
+	LCDD11_MARK, DV_D11_MARK, D19_MARK, ED19_MARK,
+	LCDD12_MARK, DV_D12_MARK, D20_MARK, ED20_MARK,
+	LCDD13_MARK, DV_D13_MARK, D21_MARK, ED21_MARK,
+	LCDD14_MARK, DV_D14_MARK, D22_MARK, ED22_MARK,
+	LCDD15_MARK, DV_D15_MARK, D23_MARK, ED23_MARK,
+	LCDD16_MARK, DV_HSYNC_MARK, D24_MARK, ED24_MARK,
+	LCDD17_MARK, DV_VSYNC_MARK, D25_MARK, ED25_MARK,
+	LCDD18_MARK, DREQ2_MARK, MSIOF0L_TSCK_MARK,
+	D26_MARK, ED26_MARK,
+	LCDD19_MARK, MSIOF0L_TSYNC_MARK,
+	D27_MARK, ED27_MARK,
+	LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK,
+	D28_MARK, ED28_MARK,
+	LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK,
+	D29_MARK, ED29_MARK,
+	LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_SS1_MARK,
+	D30_MARK, ED30_MARK,
+	LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_SS2_MARK,
+	D31_MARK, ED31_MARK,
+	LCDDCK_MARK, LCDWR_MARK, DV_CKO_MARK, SIUAOSPD_MARK,
+	LCDRD_MARK, DACK2_MARK, MSIOF0L_RSYNC_MARK,
+
+	/* 49-5 */
+	LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK,
+	LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_RSCK_MARK,
+	LCDCSYN_MARK, LCDCSYN2_MARK, DV_CKI_MARK,
+	LCDLCLK_MARK, DREQ1_MARK, MSIOF0L_RXD_MARK,
+	LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, MSIOF0L_TXD_MARK,
+	VIO_DR0_MARK, VIO_DR1_MARK, VIO_DR2_MARK, VIO_DR3_MARK,
+	VIO_DR4_MARK, VIO_DR5_MARK, VIO_DR6_MARK, VIO_DR7_MARK,
+	VIO_VDR_MARK, VIO_HDR_MARK,
+	VIO_CLKR_MARK, VIO_CKOR_MARK,
+	SCIFA1_TXD_MARK, GPS_PGFA0_MARK,
+	SCIFA1_SCK_MARK, GPS_PGFA1_MARK,
+	SCIFA1_RTS_MARK, GPS_EPPSINMON_MARK,
+	SCIFA1_RXD_MARK, SCIFA1_CTS_MARK,
+	MSIOF1_TXD_MARK, SCIFA1_TXD2_MARK, GPS_TXD_MARK,
+	MSIOF1_TSYNC_MARK, SCIFA1_CTS2_MARK, I2C_SDA2_MARK,
+	MSIOF1_TSCK_MARK, SCIFA1_SCK2_MARK,
+	MSIOF1_RXD_MARK, SCIFA1_RXD2_MARK, GPS_RXD_MARK,
+	MSIOF1_RSCK_MARK, SCIFA1_RTS2_MARK,
+	MSIOF1_RSYNC_MARK, I2C_SCL2_MARK,
+	MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK,
+	MSIOF1_SS1_MARK, EDBGREQ3_MARK,
+	MSIOF1_SS2_MARK,
+	PORT236_IROUT_MARK, IRDA_OUT_MARK,
+	IRDA_IN_MARK, IRDA_FIRSEL_MARK,
+	TPU1TO0_MARK, TS_SPSYNC3_MARK,
+	TPU1TO1_MARK, TS_SDAT3_MARK,
+	TPU1TO2_MARK, TS_SDEN3_MARK, PORT241_MSIOF2_SS1_MARK,
+	TPU1TO3_MARK, PORT242_MSIOF2_TSCK_MARK,
+	M13_BSW_MARK, PORT243_MSIOF2_TSYNC_MARK,
+	M14_GSW_MARK, PORT244_MSIOF2_TXD_MARK,
+	PORT245_IROUT_MARK, M15_RSW_MARK,
+	SOUT3_MARK, SCIFA2_TXD1_MARK,
+	SIN3_MARK, SCIFA2_RXD1_MARK,
+	XRTS3_MARK, SCIFA2_RTS1_MARK, PORT248_MSIOF2_SS2_MARK,
+	XCTS3_MARK, SCIFA2_CTS1_MARK, PORT249_MSIOF2_RXD_MARK,
+	DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
+	SDHICLK0_MARK, TCK2_MARK,
+	SDHICD0_MARK,
+	SDHID0_0_MARK, TMS2_MARK,
+	SDHID0_1_MARK, TDO2_MARK,
+	SDHID0_2_MARK, TDI2_MARK,
+	SDHID0_3_MARK, RTCK2_MARK,
+
+	/* 49-6 */
+	SDHICMD0_MARK, TRST2_MARK,
+	SDHIWP0_MARK, EDBGREQ2_MARK,
+	SDHICLK1_MARK, TCK3_MARK,
+	SDHID1_0_MARK, M11_SLCD_SO2_MARK,
+	TS_SPSYNC2_MARK, TMS3_MARK,
+	SDHID1_1_MARK, M9_SLCD_AO2_MARK,
+	TS_SDAT2_MARK, TDO3_MARK,
+	SDHID1_2_MARK, M10_SLCD_CK2_MARK,
+	TS_SDEN2_MARK, TDI3_MARK,
+	SDHID1_3_MARK, M12_SLCD_CE2_MARK,
+	TS_SCK2_MARK, RTCK3_MARK,
+	SDHICMD1_MARK, TRST3_MARK,
+	SDHICLK2_MARK, SCIFB_SCK_MARK,
+	SDHID2_0_MARK, SCIFB_TXD_MARK,
+	SDHID2_1_MARK, SCIFB_CTS_MARK,
+	SDHID2_2_MARK, SCIFB_RXD_MARK,
+	SDHID2_3_MARK, SCIFB_RTS_MARK,
+	SDHICMD2_MARK,
+	RESETOUTS_MARK,
+	DIVLOCK_MARK,
+	PINMUX_MARK_END,
+};
+
+#define PORT_DATA_I(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+
+static pinmux_enum_t pinmux_data[] = {
+
+	/* specify valid pin states for each pin in GPIO mode */
+
+	/* 49-1 (GPIO) */
+	PORT_DATA_I_PD(0),
+	PORT_DATA_I_PU(1), PORT_DATA_I_PU(2), PORT_DATA_I_PU(3),
+	PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), PORT_DATA_I_PU(6),
+	PORT_DATA_I_PU(7), PORT_DATA_I_PU(8), PORT_DATA_I_PU(9),
+	PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), PORT_DATA_I_PU(12),
+	PORT_DATA_I_PU(13),
+	PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15),
+	PORT_DATA_O(16), PORT_DATA_O(17), PORT_DATA_O(18), PORT_DATA_O(19),
+	PORT_DATA_O(20), PORT_DATA_O(21), PORT_DATA_O(22), PORT_DATA_O(23),
+	PORT_DATA_O(24), PORT_DATA_O(25), PORT_DATA_O(26),
+	PORT_DATA_I_PD(27), PORT_DATA_I_PD(28),
+	PORT_DATA_O(29), PORT_DATA_O(30), PORT_DATA_O(31), PORT_DATA_O(32),
+	PORT_DATA_IO_PU(33),
+	PORT_DATA_O(34),
+	PORT_DATA_I_PU(35),
+	PORT_DATA_O(36),
+	PORT_DATA_I_PU_PD(37),
+
+	/* 49-2 (GPIO) */
+	PORT_DATA_IO_PU_PD(38),
+	PORT_DATA_IO_PD(39), PORT_DATA_IO_PD(40), PORT_DATA_IO_PD(41),
+	PORT_DATA_O(42), PORT_DATA_O(43), PORT_DATA_O(44), PORT_DATA_O(45),
+	PORT_DATA_O(46), PORT_DATA_O(47),
+	PORT_DATA_I_PU_PD(48), PORT_DATA_I_PU_PD(49), PORT_DATA_I_PU_PD(50),
+	PORT_DATA_IO_PD(51), PORT_DATA_IO_PD(52),
+	PORT_DATA_O(53),
+	PORT_DATA_IO_PD(54),
+	PORT_DATA_I_PU_PD(55),
+	PORT_DATA_IO_PU_PD(56),
+	PORT_DATA_I_PU_PD(57),
+	PORT_DATA_IO_PU_PD(58),
+	PORT_DATA_O(59), PORT_DATA_O(60), PORT_DATA_O(61), PORT_DATA_O(62),
+	PORT_DATA_O(63),
+	PORT_DATA_I_PU(64),
+	PORT_DATA_O(65), PORT_DATA_O(66), PORT_DATA_O(67), PORT_DATA_O(68),
+	PORT_DATA_IO_PD(69), PORT_DATA_IO_PD(70),
+	PORT_DATA_I_PD(71), PORT_DATA_I_PD(72), PORT_DATA_I_PD(73),
+	PORT_DATA_I_PD(74),
+	PORT_DATA_IO_PU_PD(75), PORT_DATA_IO_PU_PD(76),
+	PORT_DATA_IO_PD(77), PORT_DATA_IO_PD(78),
+	PORT_DATA_O(79),
+	PORT_DATA_IO_PD(80), PORT_DATA_IO_PD(81), PORT_DATA_IO_PD(82),
+	PORT_DATA_IO_PU_PD(83), PORT_DATA_IO_PU_PD(84),
+	PORT_DATA_IO_PU_PD(85), PORT_DATA_IO_PU_PD(86),
+	PORT_DATA_I_PD(87),
+	PORT_DATA_IO_PU_PD(88),
+	PORT_DATA_I_PU_PD(89), PORT_DATA_I_PU_PD(90),
+
+	/* 49-3 (GPIO) */
+	PORT_DATA_O(91), PORT_DATA_O(92), PORT_DATA_O(93), PORT_DATA_O(94),
+	PORT_DATA_I_PU_PD(95),
+	PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97), PORT_DATA_IO_PU_PD(98),
+	PORT_DATA_IO_PU_PD(99),	PORT_DATA_IO_PU_PD(100),
+	PORT_DATA_IO(101), PORT_DATA_IO(102), PORT_DATA_IO(103),
+	PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105), PORT_DATA_IO_PD(106),
+	PORT_DATA_IO_PD(107),
+	PORT_DATA_IO_PU_PD(108), PORT_DATA_IO_PU_PD(109),
+	PORT_DATA_IO_PU_PD(110), PORT_DATA_IO_PU_PD(111),
+	PORT_DATA_IO_PU_PD(112), PORT_DATA_IO_PU_PD(113),
+	PORT_DATA_IO_PU_PD(114),
+	PORT_DATA_IO_PU(115), PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117),
+	PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119), PORT_DATA_IO_PU(120),
+	PORT_DATA_IO_PU(121), PORT_DATA_IO_PU(122), PORT_DATA_IO_PU(123),
+	PORT_DATA_IO_PU(124), PORT_DATA_IO_PU(125), PORT_DATA_IO_PU(126),
+	PORT_DATA_IO_PU(127), PORT_DATA_IO_PU(128), PORT_DATA_IO_PU(129),
+	PORT_DATA_IO_PU(130),
+	PORT_DATA_O(131), PORT_DATA_O(132), PORT_DATA_O(133),
+	PORT_DATA_IO_PU(134),
+	PORT_DATA_O(135), PORT_DATA_O(136),
+	PORT_DATA_I_PU_PD(137),
+	PORT_DATA_IO(138),
+	PORT_DATA_IO_PU_PD(139),
+	PORT_DATA_IO(140), PORT_DATA_IO(141),
+	PORT_DATA_I_PU(142),
+	PORT_DATA_O(143), PORT_DATA_O(144),
+	PORT_DATA_I_PU(145),
+
+	/* 49-4 (GPIO) */
+	PORT_DATA_O(146),
+	PORT_DATA_I_PU_PD(147),
+	PORT_DATA_I_PD(148), PORT_DATA_I_PD(149),
+	PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151), PORT_DATA_IO_PD(152),
+	PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), PORT_DATA_IO_PD(155),
+	PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157), PORT_DATA_IO_PD(158),
+	PORT_DATA_IO_PD(159), PORT_DATA_IO_PD(160), PORT_DATA_IO_PD(161),
+	PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), PORT_DATA_IO_PD(164),
+	PORT_DATA_IO_PD(165), PORT_DATA_IO_PD(166),
+	PORT_DATA_IO_PU_PD(167),
+	PORT_DATA_O(168),
+	PORT_DATA_I_PD(169), PORT_DATA_I_PD(170),
+	PORT_DATA_O(171),
+	PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173),
+	PORT_DATA_O(174),
+	PORT_DATA_IO_PD(175), PORT_DATA_IO_PD(176), PORT_DATA_IO_PD(177),
+	PORT_DATA_IO_PD(178), PORT_DATA_IO_PD(179), PORT_DATA_IO_PD(180),
+	PORT_DATA_IO_PD(181), PORT_DATA_IO_PD(182), PORT_DATA_IO_PD(183),
+	PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185), PORT_DATA_IO_PD(186),
+	PORT_DATA_IO_PD(187), PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189),
+	PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191), PORT_DATA_IO_PD(192),
+	PORT_DATA_IO_PD(193), PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195),
+	PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), PORT_DATA_IO_PD(198),
+	PORT_DATA_O(199),
+	PORT_DATA_IO_PD(200),
+
+	/* 49-5 (GPIO) */
+	PORT_DATA_O(201),
+	PORT_DATA_IO_PD(202), PORT_DATA_IO_PD(203),
+	PORT_DATA_I(204),
+	PORT_DATA_O(205),
+	PORT_DATA_IO_PD(206), PORT_DATA_IO_PD(207), PORT_DATA_IO_PD(208),
+	PORT_DATA_IO_PD(209), PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
+	PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), PORT_DATA_IO_PD(214),
+	PORT_DATA_IO_PD(215), PORT_DATA_IO_PD(216),
+	PORT_DATA_O(217),
+	PORT_DATA_I_PU_PD(218), PORT_DATA_I_PU_PD(219),
+	PORT_DATA_O(220), PORT_DATA_O(221), PORT_DATA_O(222),
+	PORT_DATA_I_PD(223),
+	PORT_DATA_I_PU_PD(224),
+	PORT_DATA_O(225),
+	PORT_DATA_IO_PD(226),
+	PORT_DATA_IO_PU_PD(227),
+	PORT_DATA_I_PD(228),
+	PORT_DATA_IO_PD(229), PORT_DATA_IO_PD(230),
+	PORT_DATA_I_PU_PD(231), PORT_DATA_I_PU_PD(232),
+	PORT_DATA_IO_PU_PD(233), PORT_DATA_IO_PU_PD(234),
+	PORT_DATA_I_PU_PD(235),
+	PORT_DATA_O(236),
+	PORT_DATA_I_PD(237),
+	PORT_DATA_IO_PU_PD(238), PORT_DATA_IO_PU_PD(239),
+	PORT_DATA_IO_PD(240), PORT_DATA_IO_PD(241),
+	PORT_DATA_IO_PD(242), PORT_DATA_IO_PD(243),
+	PORT_DATA_O(244),
+	PORT_DATA_IO_PU_PD(245),
+	PORT_DATA_O(246),
+	PORT_DATA_I_PD(247),
+	PORT_DATA_IO_PU_PD(248),
+	PORT_DATA_I_PU_PD(249),
+	PORT_DATA_IO_PD(250), PORT_DATA_IO_PD(251),
+	PORT_DATA_IO_PU_PD(252), PORT_DATA_IO_PU_PD(253),
+	PORT_DATA_IO_PU_PD(254), PORT_DATA_IO_PU_PD(255),
+	PORT_DATA_IO_PU_PD(256),
+
+	/* 49-6 (GPIO) */
+	PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PU_PD(258),
+	PORT_DATA_IO_PD(259),
+	PORT_DATA_IO_PU(260), PORT_DATA_IO_PU(261), PORT_DATA_IO_PU(262),
+	PORT_DATA_IO_PU(263), PORT_DATA_IO_PU(264),
+	PORT_DATA_O(265),
+	PORT_DATA_IO_PU(266), PORT_DATA_IO_PU(267), PORT_DATA_IO_PU(268),
+	PORT_DATA_IO_PU(269), PORT_DATA_IO_PU(270),
+	PORT_DATA_O(271),
+	PORT_DATA_I_PD(272),
+
+	/* Special Pull-up / Pull-down Functions */
+	PINMUX_DATA(PORT48_KEYIN0_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT48_FN2, PORT48_IN_PU),
+	PINMUX_DATA(PORT49_KEYIN1_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT49_FN2, PORT49_IN_PU),
+	PINMUX_DATA(PORT50_KEYIN2_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT50_FN2, PORT50_IN_PU),
+	PINMUX_DATA(PORT55_KEYIN3_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT55_FN2, PORT55_IN_PU),
+	PINMUX_DATA(PORT56_KEYIN4_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT56_FN2, PORT56_IN_PU),
+	PINMUX_DATA(PORT57_KEYIN5_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT57_FN2, PORT57_IN_PU),
+	PINMUX_DATA(PORT58_KEYIN6_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT58_FN2, PORT58_IN_PU),
+
+	/* 49-1 (FN) */
+	PINMUX_DATA(VBUS0_MARK, PORT0_FN1),
+	PINMUX_DATA(CPORT0_MARK, PORT1_FN1),
+	PINMUX_DATA(CPORT1_MARK, PORT2_FN1),
+	PINMUX_DATA(CPORT2_MARK, PORT3_FN1),
+	PINMUX_DATA(CPORT3_MARK, PORT4_FN1),
+	PINMUX_DATA(CPORT4_MARK, PORT5_FN1),
+	PINMUX_DATA(CPORT5_MARK, PORT6_FN1),
+	PINMUX_DATA(CPORT6_MARK, PORT7_FN1),
+	PINMUX_DATA(CPORT7_MARK, PORT8_FN1),
+	PINMUX_DATA(CPORT8_MARK, PORT9_FN1),
+	PINMUX_DATA(CPORT9_MARK, PORT10_FN1),
+	PINMUX_DATA(CPORT10_MARK, PORT11_FN1),
+	PINMUX_DATA(CPORT11_MARK, PORT12_FN1),
+	PINMUX_DATA(SIN2_MARK, PORT12_FN2),
+	PINMUX_DATA(CPORT12_MARK, PORT13_FN1),
+	PINMUX_DATA(XCTS2_MARK, PORT13_FN2),
+	PINMUX_DATA(CPORT13_MARK, PORT14_FN1),
+	PINMUX_DATA(RFSPO4_MARK, PORT14_FN2),
+	PINMUX_DATA(CPORT14_MARK, PORT15_FN1),
+	PINMUX_DATA(RFSPO5_MARK, PORT15_FN2),
+	PINMUX_DATA(CPORT15_MARK, PORT16_FN1),
+	PINMUX_DATA(CPORT16_MARK, PORT17_FN1),
+	PINMUX_DATA(CPORT17_MARK, PORT18_FN1),
+	PINMUX_DATA(SOUT2_MARK, PORT18_FN2),
+	PINMUX_DATA(CPORT18_MARK, PORT19_FN1),
+	PINMUX_DATA(XRTS2_MARK, PORT19_FN1),
+	PINMUX_DATA(CPORT19_MARK, PORT20_FN1),
+	PINMUX_DATA(CPORT20_MARK, PORT21_FN1),
+	PINMUX_DATA(RFSPO6_MARK, PORT21_FN2),
+	PINMUX_DATA(CPORT21_MARK, PORT22_FN1),
+	PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
+	PINMUX_DATA(CPORT22_MARK, PORT23_FN1),
+	PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
+	PINMUX_DATA(CPORT23_MARK, PORT24_FN1),
+	PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
+	PINMUX_DATA(RFSPO7_MARK, PORT24_FN3),
+	PINMUX_DATA(MPORT0_MARK, PORT25_FN1),
+	PINMUX_DATA(MPORT1_MARK, PORT26_FN1),
+	PINMUX_DATA(B_SYNLD1_MARK, PORT27_FN1),
+	PINMUX_DATA(B_SYNLD2_MARK, PORT28_FN1),
+	PINMUX_DATA(XMAINPS_MARK, PORT29_FN1),
+	PINMUX_DATA(XDIVPS_MARK, PORT30_FN1),
+	PINMUX_DATA(XIDRST_MARK, PORT31_FN1),
+	PINMUX_DATA(IDCLK_MARK, PORT32_FN1),
+	PINMUX_DATA(IDIO_MARK, PORT33_FN1),
+	PINMUX_DATA(SOUT1_MARK, PORT34_FN1),
+	PINMUX_DATA(SCIFA4_TXD_MARK, PORT34_FN2),
+	PINMUX_DATA(M02_BERDAT_MARK, PORT34_FN3),
+	PINMUX_DATA(SIN1_MARK, PORT35_FN1),
+	PINMUX_DATA(SCIFA4_RXD_MARK, PORT35_FN2),
+	PINMUX_DATA(XWUP_MARK, PORT35_FN3),
+	PINMUX_DATA(XRTS1_MARK, PORT36_FN1),
+	PINMUX_DATA(SCIFA4_RTS_MARK, PORT36_FN2),
+	PINMUX_DATA(M03_BERCLK_MARK, PORT36_FN3),
+	PINMUX_DATA(XCTS1_MARK, PORT37_FN1),
+	PINMUX_DATA(SCIFA4_CTS_MARK, PORT37_FN2),
+
+	/* 49-2 (FN) */
+	PINMUX_DATA(HSU_IQ_AGC6_MARK, PORT38_FN1),
+	PINMUX_DATA(MFG2_IN2_MARK, PORT38_FN2),
+	PINMUX_DATA(MSIOF2_MCK0_MARK, PORT38_FN3),
+	PINMUX_DATA(HSU_IQ_AGC5_MARK, PORT39_FN1),
+	PINMUX_DATA(MFG2_IN1_MARK, PORT39_FN2),
+	PINMUX_DATA(MSIOF2_MCK1_MARK, PORT39_FN3),
+	PINMUX_DATA(HSU_IQ_AGC4_MARK, PORT40_FN1),
+	PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT40_FN3),
+	PINMUX_DATA(HSU_IQ_AGC3_MARK, PORT41_FN1),
+	PINMUX_DATA(MFG2_OUT1_MARK, PORT41_FN2),
+	PINMUX_DATA(MSIOF2_RSCK_MARK, PORT41_FN3),
+	PINMUX_DATA(HSU_IQ_AGC2_MARK, PORT42_FN1),
+	PINMUX_DATA(PORT42_KEYOUT0_MARK, MSELBCR_MSEL2_1, PORT42_FN2),
+	PINMUX_DATA(HSU_IQ_AGC1_MARK, PORT43_FN1),
+	PINMUX_DATA(PORT43_KEYOUT1_MARK, MSELBCR_MSEL2_1, PORT43_FN2),
+	PINMUX_DATA(HSU_IQ_AGC0_MARK, PORT44_FN1),
+	PINMUX_DATA(PORT44_KEYOUT2_MARK, MSELBCR_MSEL2_1, PORT44_FN2),
+	PINMUX_DATA(HSU_IQ_AGC_ST_MARK, PORT45_FN1),
+	PINMUX_DATA(PORT45_KEYOUT3_MARK, MSELBCR_MSEL2_1, PORT45_FN2),
+	PINMUX_DATA(HSU_IQ_PDO_MARK, PORT46_FN1),
+	PINMUX_DATA(PORT46_KEYOUT4_MARK, MSELBCR_MSEL2_1, PORT46_FN2),
+	PINMUX_DATA(HSU_IQ_PYO_MARK, PORT47_FN1),
+	PINMUX_DATA(PORT47_KEYOUT5_MARK, MSELBCR_MSEL2_1, PORT47_FN2),
+	PINMUX_DATA(HSU_EN_TXMUX_G3MO_MARK, PORT48_FN1),
+	PINMUX_DATA(PORT48_KEYIN0_MARK, MSELBCR_MSEL2_1, PORT48_FN2),
+	PINMUX_DATA(HSU_I_TXMUX_G3MO_MARK, PORT49_FN1),
+	PINMUX_DATA(PORT49_KEYIN1_MARK, MSELBCR_MSEL2_1, PORT49_FN2),
+	PINMUX_DATA(HSU_Q_TXMUX_G3MO_MARK, PORT50_FN1),
+	PINMUX_DATA(PORT50_KEYIN2_MARK, MSELBCR_MSEL2_1, PORT50_FN2),
+	PINMUX_DATA(HSU_SYO_MARK, PORT51_FN1),
+	PINMUX_DATA(PORT51_MSIOF2_TSYNC_MARK, PORT51_FN2),
+	PINMUX_DATA(HSU_SDO_MARK, PORT52_FN1),
+	PINMUX_DATA(PORT52_MSIOF2_TSCK_MARK, PORT52_FN2),
+	PINMUX_DATA(HSU_TGTTI_G3MO_MARK, PORT53_FN1),
+	PINMUX_DATA(PORT53_MSIOF2_TXD_MARK, PORT53_FN2),
+	PINMUX_DATA(B_TIME_STAMP_MARK, PORT54_FN1),
+	PINMUX_DATA(PORT54_MSIOF2_RXD_MARK, PORT54_FN2),
+	PINMUX_DATA(HSU_SDI_MARK, PORT55_FN1),
+	PINMUX_DATA(PORT55_KEYIN3_MARK, MSELBCR_MSEL2_1, PORT55_FN2),
+	PINMUX_DATA(HSU_SCO_MARK, PORT56_FN1),
+	PINMUX_DATA(PORT56_KEYIN4_MARK, MSELBCR_MSEL2_1, PORT56_FN2),
+	PINMUX_DATA(HSU_DREQ_MARK, PORT57_FN1),
+	PINMUX_DATA(PORT57_KEYIN5_MARK, MSELBCR_MSEL2_1, PORT57_FN2),
+	PINMUX_DATA(HSU_DACK_MARK, PORT58_FN1),
+	PINMUX_DATA(PORT58_KEYIN6_MARK, MSELBCR_MSEL2_1, PORT58_FN2),
+	PINMUX_DATA(HSU_CLK61M_MARK, PORT59_FN1),
+	PINMUX_DATA(PORT59_MSIOF2_SS1_MARK, PORT59_FN2),
+	PINMUX_DATA(HSU_XRST_MARK, PORT60_FN1),
+	PINMUX_DATA(PORT60_MSIOF2_SS2_MARK, PORT60_FN2),
+	PINMUX_DATA(PCMCLKO_MARK, PORT61_FN1),
+	PINMUX_DATA(SYNC8KO_MARK, PORT62_FN1),
+	PINMUX_DATA(DNPCM_A_MARK, PORT63_FN1),
+	PINMUX_DATA(UPPCM_A_MARK, PORT64_FN1),
+	PINMUX_DATA(XTALB1L_MARK, PORT65_FN1),
+	PINMUX_DATA(GPS_AGC1_MARK, PORT66_FN1),
+	PINMUX_DATA(SCIFA0_RTS_MARK, PORT66_FN2),
+	PINMUX_DATA(GPS_AGC2_MARK, PORT67_FN1),
+	PINMUX_DATA(SCIFA0_SCK_MARK, PORT67_FN2),
+	PINMUX_DATA(GPS_AGC3_MARK, PORT68_FN1),
+	PINMUX_DATA(SCIFA0_TXD_MARK, PORT68_FN2),
+	PINMUX_DATA(GPS_AGC4_MARK, PORT69_FN1),
+	PINMUX_DATA(SCIFA0_RXD_MARK, PORT69_FN2),
+	PINMUX_DATA(GPS_PWRD_MARK, PORT70_FN1),
+	PINMUX_DATA(SCIFA0_CTS_MARK, PORT70_FN2),
+	PINMUX_DATA(GPS_IM_MARK, PORT71_FN1),
+	PINMUX_DATA(GPS_IS_MARK, PORT72_FN1),
+	PINMUX_DATA(GPS_QM_MARK, PORT73_FN1),
+	PINMUX_DATA(GPS_QS_MARK, PORT74_FN1),
+	PINMUX_DATA(SIUBOMC_MARK, PORT75_FN1),
+	PINMUX_DATA(TPU2TO0_MARK, PORT75_FN3),
+	PINMUX_DATA(SIUCKB_MARK, PORT76_FN1),
+	PINMUX_DATA(TPU2TO1_MARK, PORT76_FN3),
+	PINMUX_DATA(SIUBOLR_MARK, PORT77_FN1),
+	PINMUX_DATA(BBIF2_TSYNC_MARK, PORT77_FN2),
+	PINMUX_DATA(TPU2TO2_MARK, PORT77_FN3),
+	PINMUX_DATA(SIUBOBT_MARK, PORT78_FN1),
+	PINMUX_DATA(BBIF2_TSCK_MARK, PORT78_FN2),
+	PINMUX_DATA(TPU2TO3_MARK, PORT78_FN3),
+	PINMUX_DATA(SIUBOSLD_MARK, PORT79_FN1),
+	PINMUX_DATA(BBIF2_TXD_MARK, PORT79_FN2),
+	PINMUX_DATA(TPU3TO0_MARK, PORT79_FN3),
+	PINMUX_DATA(SIUBILR_MARK, PORT80_FN1),
+	PINMUX_DATA(TPU3TO1_MARK, PORT80_FN3),
+	PINMUX_DATA(SIUBIBT_MARK, PORT81_FN1),
+	PINMUX_DATA(TPU3TO2_MARK, PORT81_FN3),
+	PINMUX_DATA(SIUBISLD_MARK, PORT82_FN1),
+	PINMUX_DATA(TPU3TO3_MARK, PORT82_FN3),
+	PINMUX_DATA(NMI_MARK, PORT83_FN1),
+	PINMUX_DATA(TPU4TO0_MARK, PORT83_FN3),
+	PINMUX_DATA(DNPCM_M_MARK, PORT84_FN1),
+	PINMUX_DATA(TPU4TO1_MARK, PORT84_FN3),
+	PINMUX_DATA(TPU4TO2_MARK, PORT85_FN3),
+	PINMUX_DATA(TPU4TO3_MARK, PORT86_FN3),
+	PINMUX_DATA(IRQ_TMPB_MARK, PORT87_FN1),
+	PINMUX_DATA(PWEN_MARK, PORT88_FN1),
+	PINMUX_DATA(MFG1_OUT1_MARK, PORT88_FN2),
+	PINMUX_DATA(OVCN_MARK, PORT89_FN1),
+	PINMUX_DATA(MFG1_IN1_MARK, PORT89_FN2),
+	PINMUX_DATA(OVCN2_MARK, PORT90_FN1),
+	PINMUX_DATA(MFG1_IN2_MARK, PORT90_FN2),
+
+	/* 49-3 (FN) */
+	PINMUX_DATA(RFSPO1_MARK, PORT91_FN1),
+	PINMUX_DATA(RFSPO2_MARK, PORT92_FN1),
+	PINMUX_DATA(RFSPO3_MARK, PORT93_FN1),
+	PINMUX_DATA(PORT93_VIO_CKO2_MARK, PORT93_FN2),
+	PINMUX_DATA(USBTERM_MARK, PORT94_FN1),
+	PINMUX_DATA(EXTLP_MARK, PORT94_FN2),
+	PINMUX_DATA(IDIN_MARK, PORT95_FN1),
+	PINMUX_DATA(SCIFA5_CTS_MARK, PORT96_FN1),
+	PINMUX_DATA(MFG0_IN1_MARK, PORT96_FN2),
+	PINMUX_DATA(SCIFA5_RTS_MARK, PORT97_FN1),
+	PINMUX_DATA(MFG0_IN2_MARK, PORT97_FN2),
+	PINMUX_DATA(SCIFA5_RXD_MARK, PORT98_FN1),
+	PINMUX_DATA(SCIFA5_TXD_MARK, PORT99_FN1),
+	PINMUX_DATA(SCIFA5_SCK_MARK, PORT100_FN1),
+	PINMUX_DATA(MFG0_OUT1_MARK, PORT100_FN2),
+	PINMUX_DATA(A0_EA0_MARK, PORT101_FN1),
+	PINMUX_DATA(BS_MARK, PORT101_FN2),
+	PINMUX_DATA(A14_EA14_MARK, PORT102_FN1),
+	PINMUX_DATA(PORT102_KEYOUT0_MARK, MSELBCR_MSEL2_0, PORT102_FN2),
+	PINMUX_DATA(A15_EA15_MARK, PORT103_FN1),
+	PINMUX_DATA(PORT103_KEYOUT1_MARK, MSELBCR_MSEL2_0, PORT103_FN2),
+	PINMUX_DATA(DV_CLKOL_MARK, PORT103_FN3),
+	PINMUX_DATA(A16_EA16_MARK, PORT104_FN1),
+	PINMUX_DATA(PORT104_KEYOUT2_MARK, MSELBCR_MSEL2_0, PORT104_FN2),
+	PINMUX_DATA(DV_VSYNCL_MARK, PORT104_FN3),
+	PINMUX_DATA(MSIOF0_SS1_MARK, PORT104_FN4),
+	PINMUX_DATA(A17_EA17_MARK, PORT105_FN1),
+	PINMUX_DATA(PORT105_KEYOUT3_MARK, MSELBCR_MSEL2_0, PORT105_FN2),
+	PINMUX_DATA(DV_HSYNCL_MARK, PORT105_FN3),
+	PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT105_FN4),
+	PINMUX_DATA(A18_EA18_MARK, PORT106_FN1),
+	PINMUX_DATA(PORT106_KEYOUT4_MARK, MSELBCR_MSEL2_0, PORT106_FN2),
+	PINMUX_DATA(DV_DL0_MARK, PORT106_FN3),
+	PINMUX_DATA(MSIOF0_TSCK_MARK, PORT106_FN4),
+	PINMUX_DATA(A19_EA19_MARK, PORT107_FN1),
+	PINMUX_DATA(PORT107_KEYOUT5_MARK, MSELBCR_MSEL2_0, PORT107_FN2),
+	PINMUX_DATA(DV_DL1_MARK, PORT107_FN3),
+	PINMUX_DATA(MSIOF0_TXD_MARK, PORT107_FN4),
+	PINMUX_DATA(A20_EA20_MARK, PORT108_FN1),
+	PINMUX_DATA(PORT108_KEYIN0_MARK, MSELBCR_MSEL2_0, PORT108_FN2),
+	PINMUX_DATA(DV_DL2_MARK, PORT108_FN3),
+	PINMUX_DATA(MSIOF0_RSCK_MARK, PORT108_FN4),
+	PINMUX_DATA(A21_EA21_MARK, PORT109_FN1),
+	PINMUX_DATA(PORT109_KEYIN1_MARK, MSELBCR_MSEL2_0, PORT109_FN2),
+	PINMUX_DATA(DV_DL3_MARK, PORT109_FN3),
+	PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT109_FN4),
+	PINMUX_DATA(A22_EA22_MARK, PORT110_FN1),
+	PINMUX_DATA(PORT110_KEYIN2_MARK, MSELBCR_MSEL2_0, PORT110_FN2),
+	PINMUX_DATA(DV_DL4_MARK, PORT110_FN3),
+	PINMUX_DATA(MSIOF0_MCK0_MARK, PORT110_FN4),
+	PINMUX_DATA(A23_EA23_MARK, PORT111_FN1),
+	PINMUX_DATA(PORT111_KEYIN3_MARK, MSELBCR_MSEL2_0, PORT111_FN2),
+	PINMUX_DATA(DV_DL5_MARK, PORT111_FN3),
+	PINMUX_DATA(MSIOF0_MCK1_MARK, PORT111_FN4),
+	PINMUX_DATA(A24_EA24_MARK, PORT112_FN1),
+	PINMUX_DATA(PORT112_KEYIN4_MARK, MSELBCR_MSEL2_0, PORT112_FN2),
+	PINMUX_DATA(DV_DL6_MARK, PORT112_FN3),
+	PINMUX_DATA(MSIOF0_RXD_MARK, PORT112_FN4),
+	PINMUX_DATA(A25_EA25_MARK, PORT113_FN1),
+	PINMUX_DATA(PORT113_KEYIN5_MARK, MSELBCR_MSEL2_0, PORT113_FN2),
+	PINMUX_DATA(DV_DL7_MARK, PORT113_FN3),
+	PINMUX_DATA(MSIOF0_SS2_MARK, PORT113_FN4),
+	PINMUX_DATA(A26_MARK, PORT114_FN1),
+	PINMUX_DATA(PORT113_KEYIN6_MARK, MSELBCR_MSEL2_0, PORT114_FN2),
+	PINMUX_DATA(DV_CLKIL_MARK, PORT114_FN3),
+	PINMUX_DATA(D0_ED0_NAF0_MARK, PORT115_FN1),
+	PINMUX_DATA(D1_ED1_NAF1_MARK, PORT116_FN1),
+	PINMUX_DATA(D2_ED2_NAF2_MARK, PORT117_FN1),
+	PINMUX_DATA(D3_ED3_NAF3_MARK, PORT118_FN1),
+	PINMUX_DATA(D4_ED4_NAF4_MARK, PORT119_FN1),
+	PINMUX_DATA(D5_ED5_NAF5_MARK, PORT120_FN1),
+	PINMUX_DATA(D6_ED6_NAF6_MARK, PORT121_FN1),
+	PINMUX_DATA(D7_ED7_NAF7_MARK, PORT122_FN1),
+	PINMUX_DATA(D8_ED8_NAF8_MARK, PORT123_FN1),
+	PINMUX_DATA(D9_ED9_NAF9_MARK, PORT124_FN1),
+	PINMUX_DATA(D10_ED10_NAF10_MARK, PORT125_FN1),
+	PINMUX_DATA(D11_ED11_NAF11_MARK, PORT126_FN1),
+	PINMUX_DATA(D12_ED12_NAF12_MARK, PORT127_FN1),
+	PINMUX_DATA(D13_ED13_NAF13_MARK, PORT128_FN1),
+	PINMUX_DATA(D14_ED14_NAF14_MARK, PORT129_FN1),
+	PINMUX_DATA(D15_ED15_NAF15_MARK, PORT130_FN1),
+	PINMUX_DATA(CS4_MARK, PORT131_FN1),
+	PINMUX_DATA(CS5A_MARK, PORT132_FN1),
+	PINMUX_DATA(CS5B_MARK, PORT133_FN1),
+	PINMUX_DATA(FCE1_MARK, PORT133_FN2),
+	PINMUX_DATA(CS6B_MARK, PORT134_FN1),
+	PINMUX_DATA(XCS2_MARK, PORT134_FN2),
+	PINMUX_DATA(FCE0_MARK, PORT135_FN1),
+	PINMUX_DATA(CS6A_MARK, PORT136_FN1),
+	PINMUX_DATA(DACK0_MARK, PORT136_FN2),
+	PINMUX_DATA(WAIT_MARK, PORT137_FN1),
+	PINMUX_DATA(DREQ0_MARK, PORT137_FN2),
+	PINMUX_DATA(RD_XRD_MARK, PORT138_FN1),
+	PINMUX_DATA(A27_MARK, PORT139_FN1),
+	PINMUX_DATA(RDWR_XWE_MARK, PORT139_FN2),
+	PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT140_FN1),
+	PINMUX_DATA(WE1_XWR1_MARK, PORT141_FN1),
+	PINMUX_DATA(FRB_MARK, PORT142_FN1),
+	PINMUX_DATA(CKO_MARK, PORT143_FN1),
+	PINMUX_DATA(NBRSTOUT_MARK, PORT144_FN1),
+	PINMUX_DATA(NBRST_MARK, PORT145_FN1),
+
+	/* 49-4 (FN) */
+	PINMUX_DATA(RFSPO0_MARK, PORT146_FN1),
+	PINMUX_DATA(PORT146_VIO_CKO2_MARK, PORT146_FN2),
+	PINMUX_DATA(TSTMD_MARK, PORT147_FN1),
+	PINMUX_DATA(VIO_VD_MARK, PORT148_FN1),
+	PINMUX_DATA(VIO_HD_MARK, PORT149_FN1),
+	PINMUX_DATA(VIO_D0_MARK, PORT150_FN1),
+	PINMUX_DATA(VIO_D1_MARK, PORT151_FN1),
+	PINMUX_DATA(VIO_D2_MARK, PORT152_FN1),
+	PINMUX_DATA(VIO_D3_MARK, PORT153_FN1),
+	PINMUX_DATA(VIO_D4_MARK, PORT154_FN1),
+	PINMUX_DATA(VIO_D5_MARK, PORT155_FN1),
+	PINMUX_DATA(VIO_D6_MARK, PORT156_FN1),
+	PINMUX_DATA(VIO_D7_MARK, PORT157_FN1),
+	PINMUX_DATA(VIO_D8_MARK, PORT158_FN1),
+	PINMUX_DATA(VIO_D9_MARK, PORT159_FN1),
+	PINMUX_DATA(VIO_D10_MARK, PORT160_FN1),
+	PINMUX_DATA(VIO_D11_MARK, PORT161_FN1),
+	PINMUX_DATA(VIO_D12_MARK, PORT162_FN1),
+	PINMUX_DATA(VIO_D13_MARK, PORT163_FN1),
+	PINMUX_DATA(VIO_D14_MARK, PORT164_FN1),
+	PINMUX_DATA(VIO_D15_MARK, PORT165_FN1),
+	PINMUX_DATA(VIO_CLK_MARK, PORT166_FN1),
+	PINMUX_DATA(VIO_FIELD_MARK, PORT167_FN1),
+	PINMUX_DATA(VIO_CKO_MARK, PORT168_FN1),
+	PINMUX_DATA(MFG3_IN1_MARK, PORT169_FN2),
+	PINMUX_DATA(MFG3_IN2_MARK, PORT170_FN2),
+	PINMUX_DATA(M9_SLCD_A01_MARK, PORT171_FN1),
+	PINMUX_DATA(MFG3_OUT1_MARK, PORT171_FN2),
+	PINMUX_DATA(TPU0TO0_MARK, PORT171_FN3),
+	PINMUX_DATA(M10_SLCD_CK1_MARK, PORT172_FN1),
+	PINMUX_DATA(MFG4_IN1_MARK, PORT172_FN2),
+	PINMUX_DATA(TPU0TO1_MARK, PORT172_FN3),
+	PINMUX_DATA(M11_SLCD_SO1_MARK, PORT173_FN1),
+	PINMUX_DATA(MFG4_IN2_MARK, PORT173_FN2),
+	PINMUX_DATA(TPU0TO2_MARK, PORT173_FN3),
+	PINMUX_DATA(M12_SLCD_CE1_MARK, PORT174_FN1),
+	PINMUX_DATA(MFG4_OUT1_MARK, PORT174_FN2),
+	PINMUX_DATA(TPU0TO3_MARK, PORT174_FN3),
+	PINMUX_DATA(LCDD0_MARK, PORT175_FN1),
+	PINMUX_DATA(PORT175_KEYOUT0_MARK, PORT175_FN2),
+	PINMUX_DATA(DV_D0_MARK, PORT175_FN3),
+	PINMUX_DATA(SIUCKA_MARK, PORT175_FN4),
+	PINMUX_DATA(MFG0_OUT2_MARK, PORT175_FN5),
+	PINMUX_DATA(LCDD1_MARK, PORT176_FN1),
+	PINMUX_DATA(PORT176_KEYOUT1_MARK, PORT176_FN2),
+	PINMUX_DATA(DV_D1_MARK, PORT176_FN3),
+	PINMUX_DATA(SIUAOLR_MARK, PORT176_FN4),
+	PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT176_FN5),
+	PINMUX_DATA(LCDD2_MARK, PORT177_FN1),
+	PINMUX_DATA(PORT177_KEYOUT2_MARK, PORT177_FN2),
+	PINMUX_DATA(DV_D2_MARK, PORT177_FN3),
+	PINMUX_DATA(SIUAOBT_MARK, PORT177_FN4),
+	PINMUX_DATA(BBIF2_TSCK1_MARK, PORT177_FN5),
+	PINMUX_DATA(LCDD3_MARK, PORT178_FN1),
+	PINMUX_DATA(PORT178_KEYOUT3_MARK, PORT178_FN2),
+	PINMUX_DATA(DV_D3_MARK, PORT178_FN3),
+	PINMUX_DATA(SIUAOSLD_MARK, PORT178_FN4),
+	PINMUX_DATA(BBIF2_TXD1_MARK, PORT178_FN5),
+	PINMUX_DATA(LCDD4_MARK, PORT179_FN1),
+	PINMUX_DATA(PORT179_KEYOUT4_MARK, PORT179_FN2),
+	PINMUX_DATA(DV_D4_MARK, PORT179_FN3),
+	PINMUX_DATA(SIUAISPD_MARK, PORT179_FN4),
+	PINMUX_DATA(MFG1_OUT2_MARK, PORT179_FN5),
+	PINMUX_DATA(LCDD5_MARK, PORT180_FN1),
+	PINMUX_DATA(PORT180_KEYOUT5_MARK, PORT180_FN2),
+	PINMUX_DATA(DV_D5_MARK, PORT180_FN3),
+	PINMUX_DATA(SIUAILR_MARK, PORT180_FN4),
+	PINMUX_DATA(MFG2_OUT2_MARK, PORT180_FN5),
+	PINMUX_DATA(LCDD6_MARK, PORT181_FN1),
+	PINMUX_DATA(DV_D6_MARK, PORT181_FN3),
+	PINMUX_DATA(SIUAIBT_MARK, PORT181_FN4),
+	PINMUX_DATA(MFG3_OUT2_MARK, PORT181_FN5),
+	PINMUX_DATA(XWR2_MARK, PORT181_FN7),
+	PINMUX_DATA(LCDD7_MARK, PORT182_FN1),
+	PINMUX_DATA(DV_D7_MARK, PORT182_FN3),
+	PINMUX_DATA(SIUAISLD_MARK, PORT182_FN4),
+	PINMUX_DATA(MFG4_OUT2_MARK, PORT182_FN5),
+	PINMUX_DATA(XWR3_MARK, PORT182_FN7),
+	PINMUX_DATA(LCDD8_MARK, PORT183_FN1),
+	PINMUX_DATA(DV_D8_MARK, PORT183_FN3),
+	PINMUX_DATA(D16_MARK, PORT183_FN6),
+	PINMUX_DATA(ED16_MARK, PORT183_FN7),
+	PINMUX_DATA(LCDD9_MARK, PORT184_FN1),
+	PINMUX_DATA(DV_D9_MARK, PORT184_FN3),
+	PINMUX_DATA(D17_MARK, PORT184_FN6),
+	PINMUX_DATA(ED17_MARK, PORT184_FN7),
+	PINMUX_DATA(LCDD10_MARK, PORT185_FN1),
+	PINMUX_DATA(DV_D10_MARK, PORT185_FN3),
+	PINMUX_DATA(D18_MARK, PORT185_FN6),
+	PINMUX_DATA(ED18_MARK, PORT185_FN7),
+	PINMUX_DATA(LCDD11_MARK, PORT186_FN1),
+	PINMUX_DATA(DV_D11_MARK, PORT186_FN3),
+	PINMUX_DATA(D19_MARK, PORT186_FN6),
+	PINMUX_DATA(ED19_MARK, PORT186_FN7),
+	PINMUX_DATA(LCDD12_MARK, PORT187_FN1),
+	PINMUX_DATA(DV_D12_MARK, PORT187_FN3),
+	PINMUX_DATA(D20_MARK, PORT187_FN6),
+	PINMUX_DATA(ED20_MARK, PORT187_FN7),
+	PINMUX_DATA(LCDD13_MARK, PORT188_FN1),
+	PINMUX_DATA(DV_D13_MARK, PORT188_FN3),
+	PINMUX_DATA(D21_MARK, PORT188_FN6),
+	PINMUX_DATA(ED21_MARK, PORT188_FN7),
+	PINMUX_DATA(LCDD14_MARK, PORT189_FN1),
+	PINMUX_DATA(DV_D14_MARK, PORT189_FN3),
+	PINMUX_DATA(D22_MARK, PORT189_FN6),
+	PINMUX_DATA(ED22_MARK, PORT189_FN7),
+	PINMUX_DATA(LCDD15_MARK, PORT190_FN1),
+	PINMUX_DATA(DV_D15_MARK, PORT190_FN3),
+	PINMUX_DATA(D23_MARK, PORT190_FN6),
+	PINMUX_DATA(ED23_MARK, PORT190_FN7),
+	PINMUX_DATA(LCDD16_MARK, PORT191_FN1),
+	PINMUX_DATA(DV_HSYNC_MARK, PORT191_FN3),
+	PINMUX_DATA(D24_MARK, PORT191_FN6),
+	PINMUX_DATA(ED24_MARK, PORT191_FN7),
+	PINMUX_DATA(LCDD17_MARK, PORT192_FN1),
+	PINMUX_DATA(DV_VSYNC_MARK, PORT192_FN3),
+	PINMUX_DATA(D25_MARK, PORT192_FN6),
+	PINMUX_DATA(ED25_MARK, PORT192_FN7),
+	PINMUX_DATA(LCDD18_MARK, PORT193_FN1),
+	PINMUX_DATA(DREQ2_MARK, PORT193_FN2),
+	PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT193_FN5),
+	PINMUX_DATA(D26_MARK, PORT193_FN6),
+	PINMUX_DATA(ED26_MARK, PORT193_FN7),
+	PINMUX_DATA(LCDD19_MARK, PORT194_FN1),
+	PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT194_FN5),
+	PINMUX_DATA(D27_MARK, PORT194_FN6),
+	PINMUX_DATA(ED27_MARK, PORT194_FN7),
+	PINMUX_DATA(LCDD20_MARK, PORT195_FN1),
+	PINMUX_DATA(TS_SPSYNC1_MARK, PORT195_FN2),
+	PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT195_FN5),
+	PINMUX_DATA(D28_MARK, PORT195_FN6),
+	PINMUX_DATA(ED28_MARK, PORT195_FN7),
+	PINMUX_DATA(LCDD21_MARK, PORT196_FN1),
+	PINMUX_DATA(TS_SDAT1_MARK, PORT196_FN2),
+	PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT196_FN5),
+	PINMUX_DATA(D29_MARK, PORT196_FN6),
+	PINMUX_DATA(ED29_MARK, PORT196_FN7),
+	PINMUX_DATA(LCDD22_MARK, PORT197_FN1),
+	PINMUX_DATA(TS_SDEN1_MARK, PORT197_FN2),
+	PINMUX_DATA(MSIOF0L_SS1_MARK, PORT197_FN5),
+	PINMUX_DATA(D30_MARK, PORT197_FN6),
+	PINMUX_DATA(ED30_MARK, PORT197_FN7),
+	PINMUX_DATA(LCDD23_MARK, PORT198_FN1),
+	PINMUX_DATA(TS_SCK1_MARK, PORT198_FN2),
+	PINMUX_DATA(MSIOF0L_SS2_MARK, PORT198_FN5),
+	PINMUX_DATA(D31_MARK, PORT198_FN6),
+	PINMUX_DATA(ED31_MARK, PORT198_FN7),
+	PINMUX_DATA(LCDDCK_MARK, PORT199_FN1),
+	PINMUX_DATA(LCDWR_MARK, PORT199_FN2),
+	PINMUX_DATA(DV_CKO_MARK, PORT199_FN3),
+	PINMUX_DATA(SIUAOSPD_MARK, PORT199_FN4),
+	PINMUX_DATA(LCDRD_MARK, PORT200_FN1),
+	PINMUX_DATA(DACK2_MARK, PORT200_FN2),
+	PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT200_FN5),
+
+	/* 49-5 (FN) */
+	PINMUX_DATA(LCDHSYN_MARK, PORT201_FN1),
+	PINMUX_DATA(LCDCS_MARK, PORT201_FN2),
+	PINMUX_DATA(LCDCS2_MARK, PORT201_FN3),
+	PINMUX_DATA(DACK3_MARK, PORT201_FN4),
+	PINMUX_DATA(LCDDISP_MARK, PORT202_FN1),
+	PINMUX_DATA(LCDRS_MARK, PORT202_FN2),
+	PINMUX_DATA(DREQ3_MARK, PORT202_FN4),
+	PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT202_FN5),
+	PINMUX_DATA(LCDCSYN_MARK, PORT203_FN1),
+	PINMUX_DATA(LCDCSYN2_MARK, PORT203_FN2),
+	PINMUX_DATA(DV_CKI_MARK, PORT203_FN3),
+	PINMUX_DATA(LCDLCLK_MARK, PORT204_FN1),
+	PINMUX_DATA(DREQ1_MARK, PORT204_FN3),
+	PINMUX_DATA(MSIOF0L_RXD_MARK, PORT204_FN5),
+	PINMUX_DATA(LCDDON_MARK, PORT205_FN1),
+	PINMUX_DATA(LCDDON2_MARK, PORT205_FN2),
+	PINMUX_DATA(DACK1_MARK, PORT205_FN3),
+	PINMUX_DATA(MSIOF0L_TXD_MARK, PORT205_FN5),
+	PINMUX_DATA(VIO_DR0_MARK, PORT206_FN1),
+	PINMUX_DATA(VIO_DR1_MARK, PORT207_FN1),
+	PINMUX_DATA(VIO_DR2_MARK, PORT208_FN1),
+	PINMUX_DATA(VIO_DR3_MARK, PORT209_FN1),
+	PINMUX_DATA(VIO_DR4_MARK, PORT210_FN1),
+	PINMUX_DATA(VIO_DR5_MARK, PORT211_FN1),
+	PINMUX_DATA(VIO_DR6_MARK, PORT212_FN1),
+	PINMUX_DATA(VIO_DR7_MARK, PORT213_FN1),
+	PINMUX_DATA(VIO_VDR_MARK, PORT214_FN1),
+	PINMUX_DATA(VIO_HDR_MARK, PORT215_FN1),
+	PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN1),
+	PINMUX_DATA(VIO_CKOR_MARK, PORT217_FN1),
+	PINMUX_DATA(SCIFA1_TXD_MARK, PORT220_FN2),
+	PINMUX_DATA(GPS_PGFA0_MARK, PORT220_FN3),
+	PINMUX_DATA(SCIFA1_SCK_MARK, PORT221_FN2),
+	PINMUX_DATA(GPS_PGFA1_MARK, PORT221_FN3),
+	PINMUX_DATA(SCIFA1_RTS_MARK, PORT222_FN2),
+	PINMUX_DATA(GPS_EPPSINMON_MARK, PORT222_FN3),
+	PINMUX_DATA(SCIFA1_RXD_MARK, PORT223_FN2),
+	PINMUX_DATA(SCIFA1_CTS_MARK, PORT224_FN2),
+	PINMUX_DATA(MSIOF1_TXD_MARK, PORT225_FN1),
+	PINMUX_DATA(SCIFA1_TXD2_MARK, PORT225_FN2),
+	PINMUX_DATA(GPS_TXD_MARK, PORT225_FN3),
+	PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT226_FN1),
+	PINMUX_DATA(SCIFA1_CTS2_MARK, PORT226_FN2),
+	PINMUX_DATA(I2C_SDA2_MARK, PORT226_FN3),
+	PINMUX_DATA(MSIOF1_TSCK_MARK, PORT227_FN1),
+	PINMUX_DATA(SCIFA1_SCK2_MARK, PORT227_FN2),
+	PINMUX_DATA(MSIOF1_RXD_MARK, PORT228_FN1),
+	PINMUX_DATA(SCIFA1_RXD2_MARK, PORT228_FN2),
+	PINMUX_DATA(GPS_RXD_MARK, PORT228_FN3),
+	PINMUX_DATA(MSIOF1_RSCK_MARK, PORT229_FN1),
+	PINMUX_DATA(SCIFA1_RTS2_MARK, PORT229_FN2),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT230_FN1),
+	PINMUX_DATA(I2C_SCL2_MARK, PORT230_FN3),
+	PINMUX_DATA(MSIOF1_MCK0_MARK, PORT231_FN1),
+	PINMUX_DATA(MSIOF1_MCK1_MARK, PORT232_FN1),
+	PINMUX_DATA(MSIOF1_SS1_MARK, PORT233_FN1),
+	PINMUX_DATA(EDBGREQ3_MARK, PORT233_FN2),
+	PINMUX_DATA(MSIOF1_SS2_MARK, PORT234_FN1),
+	PINMUX_DATA(PORT236_IROUT_MARK, PORT236_FN1),
+	PINMUX_DATA(IRDA_OUT_MARK, PORT236_FN2),
+	PINMUX_DATA(IRDA_IN_MARK, PORT237_FN2),
+	PINMUX_DATA(IRDA_FIRSEL_MARK, PORT238_FN1),
+	PINMUX_DATA(TPU1TO0_MARK, PORT239_FN3),
+	PINMUX_DATA(TS_SPSYNC3_MARK, PORT239_FN4),
+	PINMUX_DATA(TPU1TO1_MARK, PORT240_FN3),
+	PINMUX_DATA(TS_SDAT3_MARK, PORT240_FN4),
+	PINMUX_DATA(TPU1TO2_MARK, PORT241_FN3),
+	PINMUX_DATA(TS_SDEN3_MARK, PORT241_FN4),
+	PINMUX_DATA(PORT241_MSIOF2_SS1_MARK, PORT241_FN5),
+	PINMUX_DATA(TPU1TO3_MARK, PORT242_FN3),
+	PINMUX_DATA(PORT242_MSIOF2_TSCK_MARK, PORT242_FN5),
+	PINMUX_DATA(M13_BSW_MARK, PORT243_FN2),
+	PINMUX_DATA(PORT243_MSIOF2_TSYNC_MARK, PORT243_FN5),
+	PINMUX_DATA(M14_GSW_MARK, PORT244_FN2),
+	PINMUX_DATA(PORT244_MSIOF2_TXD_MARK, PORT244_FN5),
+	PINMUX_DATA(PORT245_IROUT_MARK, PORT245_FN1),
+	PINMUX_DATA(M15_RSW_MARK, PORT245_FN2),
+	PINMUX_DATA(SOUT3_MARK, PORT246_FN1),
+	PINMUX_DATA(SCIFA2_TXD1_MARK, PORT246_FN2),
+	PINMUX_DATA(SIN3_MARK, PORT247_FN1),
+	PINMUX_DATA(SCIFA2_RXD1_MARK, PORT247_FN2),
+	PINMUX_DATA(XRTS3_MARK, PORT248_FN1),
+	PINMUX_DATA(SCIFA2_RTS1_MARK, PORT248_FN2),
+	PINMUX_DATA(PORT248_MSIOF2_SS2_MARK, PORT248_FN5),
+	PINMUX_DATA(XCTS3_MARK, PORT249_FN1),
+	PINMUX_DATA(SCIFA2_CTS1_MARK, PORT249_FN2),
+	PINMUX_DATA(PORT249_MSIOF2_RXD_MARK, PORT249_FN5),
+	PINMUX_DATA(DINT_MARK, PORT250_FN1),
+	PINMUX_DATA(SCIFA2_SCK1_MARK, PORT250_FN2),
+	PINMUX_DATA(TS_SCK3_MARK, PORT250_FN4),
+	PINMUX_DATA(SDHICLK0_MARK, PORT251_FN1),
+	PINMUX_DATA(TCK2_MARK, PORT251_FN2),
+	PINMUX_DATA(SDHICD0_MARK, PORT252_FN1),
+	PINMUX_DATA(SDHID0_0_MARK, PORT253_FN1),
+	PINMUX_DATA(TMS2_MARK, PORT253_FN2),
+	PINMUX_DATA(SDHID0_1_MARK, PORT254_FN1),
+	PINMUX_DATA(TDO2_MARK, PORT254_FN2),
+	PINMUX_DATA(SDHID0_2_MARK, PORT255_FN1),
+	PINMUX_DATA(TDI2_MARK, PORT255_FN2),
+	PINMUX_DATA(SDHID0_3_MARK, PORT256_FN1),
+	PINMUX_DATA(RTCK2_MARK, PORT256_FN2),
+
+	/* 49-6 (FN) */
+	PINMUX_DATA(SDHICMD0_MARK, PORT257_FN1),
+	PINMUX_DATA(TRST2_MARK, PORT257_FN2),
+	PINMUX_DATA(SDHIWP0_MARK, PORT258_FN1),
+	PINMUX_DATA(EDBGREQ2_MARK, PORT258_FN2),
+	PINMUX_DATA(SDHICLK1_MARK, PORT259_FN1),
+	PINMUX_DATA(TCK3_MARK, PORT259_FN4),
+	PINMUX_DATA(SDHID1_0_MARK, PORT260_FN1),
+	PINMUX_DATA(M11_SLCD_SO2_MARK, PORT260_FN2),
+	PINMUX_DATA(TS_SPSYNC2_MARK, PORT260_FN3),
+	PINMUX_DATA(TMS3_MARK, PORT260_FN4),
+	PINMUX_DATA(SDHID1_1_MARK, PORT261_FN1),
+	PINMUX_DATA(M9_SLCD_AO2_MARK, PORT261_FN2),
+	PINMUX_DATA(TS_SDAT2_MARK, PORT261_FN3),
+	PINMUX_DATA(TDO3_MARK, PORT261_FN4),
+	PINMUX_DATA(SDHID1_2_MARK, PORT262_FN1),
+	PINMUX_DATA(M10_SLCD_CK2_MARK, PORT262_FN2),
+	PINMUX_DATA(TS_SDEN2_MARK, PORT262_FN3),
+	PINMUX_DATA(TDI3_MARK, PORT262_FN4),
+	PINMUX_DATA(SDHID1_3_MARK, PORT263_FN1),
+	PINMUX_DATA(M12_SLCD_CE2_MARK, PORT263_FN2),
+	PINMUX_DATA(TS_SCK2_MARK, PORT263_FN3),
+	PINMUX_DATA(RTCK3_MARK, PORT263_FN4),
+	PINMUX_DATA(SDHICMD1_MARK, PORT264_FN1),
+	PINMUX_DATA(TRST3_MARK, PORT264_FN4),
+	PINMUX_DATA(SDHICLK2_MARK, PORT265_FN1),
+	PINMUX_DATA(SCIFB_SCK_MARK, PORT265_FN2),
+	PINMUX_DATA(SDHID2_0_MARK, PORT266_FN1),
+	PINMUX_DATA(SCIFB_TXD_MARK, PORT266_FN2),
+	PINMUX_DATA(SDHID2_1_MARK, PORT267_FN1),
+	PINMUX_DATA(SCIFB_CTS_MARK, PORT267_FN2),
+	PINMUX_DATA(SDHID2_2_MARK, PORT268_FN1),
+	PINMUX_DATA(SCIFB_RXD_MARK, PORT268_FN2),
+	PINMUX_DATA(SDHID2_3_MARK, PORT269_FN1),
+	PINMUX_DATA(SCIFB_RTS_MARK, PORT269_FN2),
+	PINMUX_DATA(SDHICMD2_MARK, PORT270_FN1),
+	PINMUX_DATA(RESETOUTS_MARK, PORT271_FN1),
+	PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_273() _273(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* 49-1 -> 49-6 (GPIO) */
+	GPIO_PORT_273(),
+
+	/* Special Pull-up / Pull-down Functions */
+	GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
+	GPIO_FN(PORT50_KEYIN2_PU), GPIO_FN(PORT55_KEYIN3_PU),
+	GPIO_FN(PORT56_KEYIN4_PU), GPIO_FN(PORT57_KEYIN5_PU),
+	GPIO_FN(PORT58_KEYIN6_PU),
+
+	/* 49-1 (FN) */
+	GPIO_FN(VBUS0), GPIO_FN(CPORT0), GPIO_FN(CPORT1), GPIO_FN(CPORT2),
+	GPIO_FN(CPORT3), GPIO_FN(CPORT4), GPIO_FN(CPORT5), GPIO_FN(CPORT6),
+	GPIO_FN(CPORT7), GPIO_FN(CPORT8), GPIO_FN(CPORT9), GPIO_FN(CPORT10),
+	GPIO_FN(CPORT11), GPIO_FN(SIN2), GPIO_FN(CPORT12), GPIO_FN(XCTS2),
+	GPIO_FN(CPORT13), GPIO_FN(RFSPO4), GPIO_FN(CPORT14), GPIO_FN(RFSPO5),
+	GPIO_FN(CPORT15), GPIO_FN(CPORT16), GPIO_FN(CPORT17), GPIO_FN(SOUT2),
+	GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(CPORT19), GPIO_FN(CPORT20),
+	GPIO_FN(RFSPO6), GPIO_FN(CPORT21), GPIO_FN(STATUS0), GPIO_FN(CPORT22),
+	GPIO_FN(STATUS1), GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7),
+	GPIO_FN(MPORT0), GPIO_FN(MPORT1), GPIO_FN(B_SYNLD1), GPIO_FN(B_SYNLD2),
+	GPIO_FN(XMAINPS), GPIO_FN(XDIVPS), GPIO_FN(XIDRST), GPIO_FN(IDCLK),
+	GPIO_FN(IDIO), GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD),
+	GPIO_FN(M02_BERDAT), GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP),
+	GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK),
+	GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS),
+
+	/* 49-2 (FN) */
+	GPIO_FN(HSU_IQ_AGC6), GPIO_FN(MFG2_IN2), GPIO_FN(MSIOF2_MCK0),
+	GPIO_FN(HSU_IQ_AGC5), GPIO_FN(MFG2_IN1), GPIO_FN(MSIOF2_MCK1),
+	GPIO_FN(HSU_IQ_AGC4), GPIO_FN(MSIOF2_RSYNC),
+	GPIO_FN(HSU_IQ_AGC3), GPIO_FN(MFG2_OUT1), GPIO_FN(MSIOF2_RSCK),
+	GPIO_FN(HSU_IQ_AGC2), GPIO_FN(PORT42_KEYOUT0),
+	GPIO_FN(HSU_IQ_AGC1), GPIO_FN(PORT43_KEYOUT1),
+	GPIO_FN(HSU_IQ_AGC0), GPIO_FN(PORT44_KEYOUT2),
+	GPIO_FN(HSU_IQ_AGC_ST), GPIO_FN(PORT45_KEYOUT3),
+	GPIO_FN(HSU_IQ_PDO), GPIO_FN(PORT46_KEYOUT4),
+	GPIO_FN(HSU_IQ_PYO), GPIO_FN(PORT47_KEYOUT5),
+	GPIO_FN(HSU_EN_TXMUX_G3MO), GPIO_FN(PORT48_KEYIN0),
+	GPIO_FN(HSU_I_TXMUX_G3MO), GPIO_FN(PORT49_KEYIN1),
+	GPIO_FN(HSU_Q_TXMUX_G3MO), GPIO_FN(PORT50_KEYIN2),
+	GPIO_FN(HSU_SYO), GPIO_FN(PORT51_MSIOF2_TSYNC),
+	GPIO_FN(HSU_SDO), GPIO_FN(PORT52_MSIOF2_TSCK),
+	GPIO_FN(HSU_TGTTI_G3MO), GPIO_FN(PORT53_MSIOF2_TXD),
+	GPIO_FN(B_TIME_STAMP), GPIO_FN(PORT54_MSIOF2_RXD),
+	GPIO_FN(HSU_SDI), GPIO_FN(PORT55_KEYIN3),
+	GPIO_FN(HSU_SCO), GPIO_FN(PORT56_KEYIN4),
+	GPIO_FN(HSU_DREQ), GPIO_FN(PORT57_KEYIN5),
+	GPIO_FN(HSU_DACK), GPIO_FN(PORT58_KEYIN6),
+	GPIO_FN(HSU_CLK61M), GPIO_FN(PORT59_MSIOF2_SS1),
+	GPIO_FN(HSU_XRST), GPIO_FN(PORT60_MSIOF2_SS2),
+	GPIO_FN(PCMCLKO), GPIO_FN(SYNC8KO), GPIO_FN(DNPCM_A), GPIO_FN(UPPCM_A),
+	GPIO_FN(XTALB1L),
+	GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS),
+	GPIO_FN(GPS_AGC2), GPIO_FN(SCIFA0_SCK),
+	GPIO_FN(GPS_AGC3), GPIO_FN(SCIFA0_TXD),
+	GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD),
+	GPIO_FN(GPS_PWRD), GPIO_FN(SCIFA0_CTS),
+	GPIO_FN(GPS_IM), GPIO_FN(GPS_IS), GPIO_FN(GPS_QM), GPIO_FN(GPS_QS),
+	GPIO_FN(SIUBOMC), GPIO_FN(TPU2TO0),
+	GPIO_FN(SIUCKB), GPIO_FN(TPU2TO1),
+	GPIO_FN(SIUBOLR), GPIO_FN(BBIF2_TSYNC), GPIO_FN(TPU2TO2),
+	GPIO_FN(SIUBOBT), GPIO_FN(BBIF2_TSCK), GPIO_FN(TPU2TO3),
+	GPIO_FN(SIUBOSLD), GPIO_FN(BBIF2_TXD), GPIO_FN(TPU3TO0),
+	GPIO_FN(SIUBILR), GPIO_FN(TPU3TO1),
+	GPIO_FN(SIUBIBT), GPIO_FN(TPU3TO2),
+	GPIO_FN(SIUBISLD), GPIO_FN(TPU3TO3),
+	GPIO_FN(NMI), GPIO_FN(TPU4TO0),
+	GPIO_FN(DNPCM_M), GPIO_FN(TPU4TO1), GPIO_FN(TPU4TO2), GPIO_FN(TPU4TO3),
+	GPIO_FN(IRQ_TMPB),
+	GPIO_FN(PWEN), GPIO_FN(MFG1_OUT1),
+	GPIO_FN(OVCN), GPIO_FN(MFG1_IN1),
+	GPIO_FN(OVCN2), GPIO_FN(MFG1_IN2),
+
+	/* 49-3 (FN) */
+	GPIO_FN(RFSPO1), GPIO_FN(RFSPO2), GPIO_FN(RFSPO3),
+	GPIO_FN(PORT93_VIO_CKO2),
+	GPIO_FN(USBTERM), GPIO_FN(EXTLP), GPIO_FN(IDIN),
+	GPIO_FN(SCIFA5_CTS), GPIO_FN(MFG0_IN1),
+	GPIO_FN(SCIFA5_RTS), GPIO_FN(MFG0_IN2),
+	GPIO_FN(SCIFA5_RXD),
+	GPIO_FN(SCIFA5_TXD),
+	GPIO_FN(SCIFA5_SCK), GPIO_FN(MFG0_OUT1),
+	GPIO_FN(A0_EA0), GPIO_FN(BS),
+	GPIO_FN(A14_EA14), GPIO_FN(PORT102_KEYOUT0),
+	GPIO_FN(A15_EA15), GPIO_FN(PORT103_KEYOUT1), GPIO_FN(DV_CLKOL),
+	GPIO_FN(A16_EA16), GPIO_FN(PORT104_KEYOUT2),
+	GPIO_FN(DV_VSYNCL), GPIO_FN(MSIOF0_SS1),
+	GPIO_FN(A17_EA17), GPIO_FN(PORT105_KEYOUT3),
+	GPIO_FN(DV_HSYNCL), GPIO_FN(MSIOF0_TSYNC),
+	GPIO_FN(A18_EA18), GPIO_FN(PORT106_KEYOUT4),
+	GPIO_FN(DV_DL0), GPIO_FN(MSIOF0_TSCK),
+	GPIO_FN(A19_EA19), GPIO_FN(PORT107_KEYOUT5),
+	GPIO_FN(DV_DL1), GPIO_FN(MSIOF0_TXD),
+	GPIO_FN(A20_EA20), GPIO_FN(PORT108_KEYIN0),
+	GPIO_FN(DV_DL2), GPIO_FN(MSIOF0_RSCK),
+	GPIO_FN(A21_EA21), GPIO_FN(PORT109_KEYIN1),
+	GPIO_FN(DV_DL3), GPIO_FN(MSIOF0_RSYNC),
+	GPIO_FN(A22_EA22), GPIO_FN(PORT110_KEYIN2),
+	GPIO_FN(DV_DL4), GPIO_FN(MSIOF0_MCK0),
+	GPIO_FN(A23_EA23), GPIO_FN(PORT111_KEYIN3),
+	GPIO_FN(DV_DL5), GPIO_FN(MSIOF0_MCK1),
+	GPIO_FN(A24_EA24), GPIO_FN(PORT112_KEYIN4),
+	GPIO_FN(DV_DL6), GPIO_FN(MSIOF0_RXD),
+	GPIO_FN(A25_EA25), GPIO_FN(PORT113_KEYIN5),
+	GPIO_FN(DV_DL7), GPIO_FN(MSIOF0_SS2),
+	GPIO_FN(A26), GPIO_FN(PORT113_KEYIN6), GPIO_FN(DV_CLKIL),
+	GPIO_FN(D0_ED0_NAF0), GPIO_FN(D1_ED1_NAF1), GPIO_FN(D2_ED2_NAF2),
+	GPIO_FN(D3_ED3_NAF3), GPIO_FN(D4_ED4_NAF4), GPIO_FN(D5_ED5_NAF5),
+	GPIO_FN(D6_ED6_NAF6), GPIO_FN(D7_ED7_NAF7), GPIO_FN(D8_ED8_NAF8),
+	GPIO_FN(D9_ED9_NAF9), GPIO_FN(D10_ED10_NAF10), GPIO_FN(D11_ED11_NAF11),
+	GPIO_FN(D12_ED12_NAF12), GPIO_FN(D13_ED13_NAF13),
+	GPIO_FN(D14_ED14_NAF14), GPIO_FN(D15_ED15_NAF15),
+	GPIO_FN(CS4), GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(FCE1),
+	GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(FCE0), GPIO_FN(CS6A),
+	GPIO_FN(DACK0), GPIO_FN(WAIT), GPIO_FN(DREQ0), GPIO_FN(RD_XRD),
+	GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(WE0_XWR0_FWE),
+	GPIO_FN(WE1_XWR1), GPIO_FN(FRB), GPIO_FN(CKO),
+	GPIO_FN(NBRSTOUT), GPIO_FN(NBRST),
+
+	/* 49-4 (FN) */
+	GPIO_FN(RFSPO0), GPIO_FN(PORT146_VIO_CKO2), GPIO_FN(TSTMD),
+	GPIO_FN(VIO_VD), GPIO_FN(VIO_HD),
+	GPIO_FN(VIO_D0), GPIO_FN(VIO_D1), GPIO_FN(VIO_D2),
+	GPIO_FN(VIO_D3), GPIO_FN(VIO_D4), GPIO_FN(VIO_D5),
+	GPIO_FN(VIO_D6), GPIO_FN(VIO_D7), GPIO_FN(VIO_D8),
+	GPIO_FN(VIO_D9), GPIO_FN(VIO_D10), GPIO_FN(VIO_D11),
+	GPIO_FN(VIO_D12), GPIO_FN(VIO_D13), GPIO_FN(VIO_D14),
+	GPIO_FN(VIO_D15), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD),
+	GPIO_FN(VIO_CKO),
+	GPIO_FN(MFG3_IN1), GPIO_FN(MFG3_IN2),
+	GPIO_FN(M9_SLCD_A01), GPIO_FN(MFG3_OUT1), GPIO_FN(TPU0TO0),
+	GPIO_FN(M10_SLCD_CK1), GPIO_FN(MFG4_IN1), GPIO_FN(TPU0TO1),
+	GPIO_FN(M11_SLCD_SO1), GPIO_FN(MFG4_IN2), GPIO_FN(TPU0TO2),
+	GPIO_FN(M12_SLCD_CE1), GPIO_FN(MFG4_OUT1), GPIO_FN(TPU0TO3),
+	GPIO_FN(LCDD0), GPIO_FN(PORT175_KEYOUT0), GPIO_FN(DV_D0),
+	GPIO_FN(SIUCKA), GPIO_FN(MFG0_OUT2),
+	GPIO_FN(LCDD1), GPIO_FN(PORT176_KEYOUT1), GPIO_FN(DV_D1),
+	GPIO_FN(SIUAOLR), GPIO_FN(BBIF2_TSYNC1),
+	GPIO_FN(LCDD2), GPIO_FN(PORT177_KEYOUT2), GPIO_FN(DV_D2),
+	GPIO_FN(SIUAOBT), GPIO_FN(BBIF2_TSCK1),
+	GPIO_FN(LCDD3), GPIO_FN(PORT178_KEYOUT3), GPIO_FN(DV_D3),
+	GPIO_FN(SIUAOSLD), GPIO_FN(BBIF2_TXD1),
+	GPIO_FN(LCDD4), GPIO_FN(PORT179_KEYOUT4), GPIO_FN(DV_D4),
+	GPIO_FN(SIUAISPD), GPIO_FN(MFG1_OUT2),
+	GPIO_FN(LCDD5), GPIO_FN(PORT180_KEYOUT5), GPIO_FN(DV_D5),
+	GPIO_FN(SIUAILR), GPIO_FN(MFG2_OUT2),
+	GPIO_FN(LCDD6), GPIO_FN(DV_D6),
+	GPIO_FN(SIUAIBT), GPIO_FN(MFG3_OUT2), GPIO_FN(XWR2),
+	GPIO_FN(LCDD7), GPIO_FN(DV_D7),
+	GPIO_FN(SIUAISLD), GPIO_FN(MFG4_OUT2), GPIO_FN(XWR3),
+	GPIO_FN(LCDD8), GPIO_FN(DV_D8), GPIO_FN(D16), GPIO_FN(ED16),
+	GPIO_FN(LCDD9), GPIO_FN(DV_D9), GPIO_FN(D17), GPIO_FN(ED17),
+	GPIO_FN(LCDD10), GPIO_FN(DV_D10), GPIO_FN(D18), GPIO_FN(ED18),
+	GPIO_FN(LCDD11), GPIO_FN(DV_D11), GPIO_FN(D19), GPIO_FN(ED19),
+	GPIO_FN(LCDD12), GPIO_FN(DV_D12), GPIO_FN(D20), GPIO_FN(ED20),
+	GPIO_FN(LCDD13), GPIO_FN(DV_D13), GPIO_FN(D21), GPIO_FN(ED21),
+	GPIO_FN(LCDD14), GPIO_FN(DV_D14), GPIO_FN(D22), GPIO_FN(ED22),
+	GPIO_FN(LCDD15), GPIO_FN(DV_D15), GPIO_FN(D23), GPIO_FN(ED23),
+	GPIO_FN(LCDD16), GPIO_FN(DV_HSYNC), GPIO_FN(D24), GPIO_FN(ED24),
+	GPIO_FN(LCDD17), GPIO_FN(DV_VSYNC), GPIO_FN(D25), GPIO_FN(ED25),
+	GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(MSIOF0L_TSCK),
+	GPIO_FN(D26), GPIO_FN(ED26),
+	GPIO_FN(LCDD19), GPIO_FN(MSIOF0L_TSYNC),
+	GPIO_FN(D27), GPIO_FN(ED27),
+	GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0),
+	GPIO_FN(D28), GPIO_FN(ED28),
+	GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1),
+	GPIO_FN(D29), GPIO_FN(ED29),
+	GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_SS1),
+	GPIO_FN(D30), GPIO_FN(ED30),
+	GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_SS2),
+	GPIO_FN(D31), GPIO_FN(ED31),
+	GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(DV_CKO), GPIO_FN(SIUAOSPD),
+	GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_RSYNC),
+
+	/* 49-5 (FN) */
+	GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3),
+	GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_RSCK),
+	GPIO_FN(LCDCSYN), GPIO_FN(LCDCSYN2), GPIO_FN(DV_CKI),
+	GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(MSIOF0L_RXD),
+	GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(MSIOF0L_TXD),
+	GPIO_FN(VIO_DR0), GPIO_FN(VIO_DR1), GPIO_FN(VIO_DR2), GPIO_FN(VIO_DR3),
+	GPIO_FN(VIO_DR4), GPIO_FN(VIO_DR5), GPIO_FN(VIO_DR6), GPIO_FN(VIO_DR7),
+	GPIO_FN(VIO_VDR), GPIO_FN(VIO_HDR),
+	GPIO_FN(VIO_CLKR), GPIO_FN(VIO_CKOR),
+	GPIO_FN(SCIFA1_TXD), GPIO_FN(GPS_PGFA0),
+	GPIO_FN(SCIFA1_SCK), GPIO_FN(GPS_PGFA1),
+	GPIO_FN(SCIFA1_RTS), GPIO_FN(GPS_EPPSINMON),
+	GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_CTS),
+	GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA1_TXD2), GPIO_FN(GPS_TXD),
+	GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA1_CTS2), GPIO_FN(I2C_SDA2),
+	GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA1_SCK2),
+	GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA1_RXD2), GPIO_FN(GPS_RXD),
+	GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA1_RTS2),
+	GPIO_FN(MSIOF1_RSYNC), GPIO_FN(I2C_SCL2),
+	GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1),
+	GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3),
+	GPIO_FN(MSIOF1_SS2),
+	GPIO_FN(PORT236_IROUT), GPIO_FN(IRDA_OUT),
+	GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL),
+	GPIO_FN(TPU1TO0), GPIO_FN(TS_SPSYNC3),
+	GPIO_FN(TPU1TO1), GPIO_FN(TS_SDAT3),
+	GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT241_MSIOF2_SS1),
+	GPIO_FN(TPU1TO3), GPIO_FN(PORT242_MSIOF2_TSCK),
+	GPIO_FN(M13_BSW), GPIO_FN(PORT243_MSIOF2_TSYNC),
+	GPIO_FN(M14_GSW), GPIO_FN(PORT244_MSIOF2_TXD),
+	GPIO_FN(PORT245_IROUT), GPIO_FN(M15_RSW),
+	GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1),
+	GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1),
+	GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT248_MSIOF2_SS2),
+	GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT249_MSIOF2_RXD),
+	GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3),
+	GPIO_FN(SDHICLK0), GPIO_FN(TCK2),
+	GPIO_FN(SDHICD0),
+	GPIO_FN(SDHID0_0), GPIO_FN(TMS2),
+	GPIO_FN(SDHID0_1), GPIO_FN(TDO2),
+	GPIO_FN(SDHID0_2), GPIO_FN(TDI2),
+	GPIO_FN(SDHID0_3), GPIO_FN(RTCK2),
+
+	/* 49-6 (FN) */
+	GPIO_FN(SDHICMD0), GPIO_FN(TRST2),
+	GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2),
+	GPIO_FN(SDHICLK1), GPIO_FN(TCK3),
+	GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2),
+	GPIO_FN(TS_SPSYNC2), GPIO_FN(TMS3),
+	GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_AO2),
+	GPIO_FN(TS_SDAT2), GPIO_FN(TDO3),
+	GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2),
+	GPIO_FN(TS_SDEN2), GPIO_FN(TDI3),
+	GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2),
+	GPIO_FN(TS_SCK2), GPIO_FN(RTCK3),
+	GPIO_FN(SDHICMD1), GPIO_FN(TRST3),
+	GPIO_FN(SDHICLK2), GPIO_FN(SCIFB_SCK),
+	GPIO_FN(SDHID2_0), GPIO_FN(SCIFB_TXD),
+	GPIO_FN(SDHID2_1), GPIO_FN(SCIFB_CTS),
+	GPIO_FN(SDHID2_2), GPIO_FN(SCIFB_RXD),
+	GPIO_FN(SDHID2_3), GPIO_FN(SCIFB_RTS),
+	GPIO_FN(SDHICMD2),
+	GPIO_FN(RESETOUTS),
+	GPIO_FN(DIVLOCK),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out)		\
+	0, (out), (in), 0,			\
+	0, 0, 0, 0,				\
+	0, 0, (in_pd), 0,			\
+	0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)						\
+	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
+		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
+		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
+		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
+		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
+		PORT##nr##_FN6, PORT##nr##_FN7 }		\
+	}
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	PORTCR(0, 0xe6050000), /* PORT0CR */
+	PORTCR(1, 0xe6050001), /* PORT1CR */
+	PORTCR(2, 0xe6050002), /* PORT2CR */
+	PORTCR(3, 0xe6050003), /* PORT3CR */
+	PORTCR(4, 0xe6050004), /* PORT4CR */
+	PORTCR(5, 0xe6050005), /* PORT5CR */
+	PORTCR(6, 0xe6050006), /* PORT6CR */
+	PORTCR(7, 0xe6050007), /* PORT7CR */
+	PORTCR(8, 0xe6050008), /* PORT8CR */
+	PORTCR(9, 0xe6050009), /* PORT9CR */
+
+	PORTCR(10, 0xe605000a), /* PORT10CR */
+	PORTCR(11, 0xe605000b), /* PORT11CR */
+	PORTCR(12, 0xe605000c), /* PORT12CR */
+	PORTCR(13, 0xe605000d), /* PORT13CR */
+	PORTCR(14, 0xe605000e), /* PORT14CR */
+	PORTCR(15, 0xe605000f), /* PORT15CR */
+	PORTCR(16, 0xe6050010), /* PORT16CR */
+	PORTCR(17, 0xe6050011), /* PORT17CR */
+	PORTCR(18, 0xe6050012), /* PORT18CR */
+	PORTCR(19, 0xe6050013), /* PORT19CR */
+
+	PORTCR(20, 0xe6050014), /* PORT20CR */
+	PORTCR(21, 0xe6050015), /* PORT21CR */
+	PORTCR(22, 0xe6050016), /* PORT22CR */
+	PORTCR(23, 0xe6050017), /* PORT23CR */
+	PORTCR(24, 0xe6050018), /* PORT24CR */
+	PORTCR(25, 0xe6050019), /* PORT25CR */
+	PORTCR(26, 0xe605001a), /* PORT26CR */
+	PORTCR(27, 0xe605001b), /* PORT27CR */
+	PORTCR(28, 0xe605001c), /* PORT28CR */
+	PORTCR(29, 0xe605001d), /* PORT29CR */
+
+	PORTCR(30, 0xe605001e), /* PORT30CR */
+	PORTCR(31, 0xe605001f), /* PORT31CR */
+	PORTCR(32, 0xe6050020), /* PORT32CR */
+	PORTCR(33, 0xe6050021), /* PORT33CR */
+	PORTCR(34, 0xe6050022), /* PORT34CR */
+	PORTCR(35, 0xe6050023), /* PORT35CR */
+	PORTCR(36, 0xe6050024), /* PORT36CR */
+	PORTCR(37, 0xe6050025), /* PORT37CR */
+	PORTCR(38, 0xe6050026), /* PORT38CR */
+	PORTCR(39, 0xe6050027), /* PORT39CR */
+
+	PORTCR(40, 0xe6050028), /* PORT40CR */
+	PORTCR(41, 0xe6050029), /* PORT41CR */
+	PORTCR(42, 0xe605002a), /* PORT42CR */
+	PORTCR(43, 0xe605002b), /* PORT43CR */
+	PORTCR(44, 0xe605002c), /* PORT44CR */
+	PORTCR(45, 0xe605002d), /* PORT45CR */
+	PORTCR(46, 0xe605002e), /* PORT46CR */
+	PORTCR(47, 0xe605002f), /* PORT47CR */
+	PORTCR(48, 0xe6050030), /* PORT48CR */
+	PORTCR(49, 0xe6050031), /* PORT49CR */
+
+	PORTCR(50, 0xe6050032), /* PORT50CR */
+	PORTCR(51, 0xe6050033), /* PORT51CR */
+	PORTCR(52, 0xe6050034), /* PORT52CR */
+	PORTCR(53, 0xe6050035), /* PORT53CR */
+	PORTCR(54, 0xe6050036), /* PORT54CR */
+	PORTCR(55, 0xe6050037), /* PORT55CR */
+	PORTCR(56, 0xe6050038), /* PORT56CR */
+	PORTCR(57, 0xe6050039), /* PORT57CR */
+	PORTCR(58, 0xe605003a), /* PORT58CR */
+	PORTCR(59, 0xe605003b), /* PORT59CR */
+
+	PORTCR(60, 0xe605003c), /* PORT60CR */
+	PORTCR(61, 0xe605003d), /* PORT61CR */
+	PORTCR(62, 0xe605003e), /* PORT62CR */
+	PORTCR(63, 0xe605003f), /* PORT63CR */
+	PORTCR(64, 0xe6050040), /* PORT64CR */
+	PORTCR(65, 0xe6050041), /* PORT65CR */
+	PORTCR(66, 0xe6050042), /* PORT66CR */
+	PORTCR(67, 0xe6050043), /* PORT67CR */
+	PORTCR(68, 0xe6050044), /* PORT68CR */
+	PORTCR(69, 0xe6050045), /* PORT69CR */
+
+	PORTCR(70, 0xe6050046), /* PORT70CR */
+	PORTCR(71, 0xe6050047), /* PORT71CR */
+	PORTCR(72, 0xe6050048), /* PORT72CR */
+	PORTCR(73, 0xe6050049), /* PORT73CR */
+	PORTCR(74, 0xe605004a), /* PORT74CR */
+	PORTCR(75, 0xe605004b), /* PORT75CR */
+	PORTCR(76, 0xe605004c), /* PORT76CR */
+	PORTCR(77, 0xe605004d), /* PORT77CR */
+	PORTCR(78, 0xe605004e), /* PORT78CR */
+	PORTCR(79, 0xe605004f), /* PORT79CR */
+
+	PORTCR(80, 0xe6050050), /* PORT80CR */
+	PORTCR(81, 0xe6050051), /* PORT81CR */
+	PORTCR(82, 0xe6050052), /* PORT82CR */
+	PORTCR(83, 0xe6050053), /* PORT83CR */
+	PORTCR(84, 0xe6050054), /* PORT84CR */
+	PORTCR(85, 0xe6050055), /* PORT85CR */
+	PORTCR(86, 0xe6050056), /* PORT86CR */
+	PORTCR(87, 0xe6050057), /* PORT87CR */
+	PORTCR(88, 0xe6051058), /* PORT88CR */
+	PORTCR(89, 0xe6051059), /* PORT89CR */
+
+	PORTCR(90, 0xe605105a), /* PORT90CR */
+	PORTCR(91, 0xe605105b), /* PORT91CR */
+	PORTCR(92, 0xe605105c), /* PORT92CR */
+	PORTCR(93, 0xe605105d), /* PORT93CR */
+	PORTCR(94, 0xe605105e), /* PORT94CR */
+	PORTCR(95, 0xe605105f), /* PORT95CR */
+	PORTCR(96, 0xe6051060), /* PORT96CR */
+	PORTCR(97, 0xe6051061), /* PORT97CR */
+	PORTCR(98, 0xe6051062), /* PORT98CR */
+	PORTCR(99, 0xe6051063), /* PORT99CR */
+
+	PORTCR(100, 0xe6051064), /* PORT100CR */
+	PORTCR(101, 0xe6051065), /* PORT101CR */
+	PORTCR(102, 0xe6051066), /* PORT102CR */
+	PORTCR(103, 0xe6051067), /* PORT103CR */
+	PORTCR(104, 0xe6051068), /* PORT104CR */
+	PORTCR(105, 0xe6051069), /* PORT105CR */
+	PORTCR(106, 0xe605106a), /* PORT106CR */
+	PORTCR(107, 0xe605106b), /* PORT107CR */
+	PORTCR(108, 0xe605106c), /* PORT108CR */
+	PORTCR(109, 0xe605106d), /* PORT109CR */
+
+	PORTCR(110, 0xe605106e), /* PORT110CR */
+	PORTCR(111, 0xe605106f), /* PORT111CR */
+	PORTCR(112, 0xe6051070), /* PORT112CR */
+	PORTCR(113, 0xe6051071), /* PORT113CR */
+	PORTCR(114, 0xe6051072), /* PORT114CR */
+	PORTCR(115, 0xe6051073), /* PORT115CR */
+	PORTCR(116, 0xe6051074), /* PORT116CR */
+	PORTCR(117, 0xe6051075), /* PORT117CR */
+	PORTCR(118, 0xe6051076), /* PORT118CR */
+	PORTCR(119, 0xe6051077), /* PORT119CR */
+
+	PORTCR(120, 0xe6051078), /* PORT120CR */
+	PORTCR(121, 0xe6051079), /* PORT121CR */
+	PORTCR(122, 0xe605107a), /* PORT122CR */
+	PORTCR(123, 0xe605107b), /* PORT123CR */
+	PORTCR(124, 0xe605107c), /* PORT124CR */
+	PORTCR(125, 0xe605107d), /* PORT125CR */
+	PORTCR(126, 0xe605107e), /* PORT126CR */
+	PORTCR(127, 0xe605107f), /* PORT127CR */
+	PORTCR(128, 0xe6051080), /* PORT128CR */
+	PORTCR(129, 0xe6051081), /* PORT129CR */
+
+	PORTCR(130, 0xe6051082), /* PORT130CR */
+	PORTCR(131, 0xe6051083), /* PORT131CR */
+	PORTCR(132, 0xe6051084), /* PORT132CR */
+	PORTCR(133, 0xe6051085), /* PORT133CR */
+	PORTCR(134, 0xe6051086), /* PORT134CR */
+	PORTCR(135, 0xe6051087), /* PORT135CR */
+	PORTCR(136, 0xe6051088), /* PORT136CR */
+	PORTCR(137, 0xe6051089), /* PORT137CR */
+	PORTCR(138, 0xe605108a), /* PORT138CR */
+	PORTCR(139, 0xe605108b), /* PORT139CR */
+
+	PORTCR(140, 0xe605108c), /* PORT140CR */
+	PORTCR(141, 0xe605108d), /* PORT141CR */
+	PORTCR(142, 0xe605108e), /* PORT142CR */
+	PORTCR(143, 0xe605108f), /* PORT143CR */
+	PORTCR(144, 0xe6051090), /* PORT144CR */
+	PORTCR(145, 0xe6051091), /* PORT145CR */
+	PORTCR(146, 0xe6051092), /* PORT146CR */
+	PORTCR(147, 0xe6051093), /* PORT147CR */
+	PORTCR(148, 0xe6051094), /* PORT148CR */
+	PORTCR(149, 0xe6051095), /* PORT149CR */
+
+	PORTCR(150, 0xe6051096), /* PORT150CR */
+	PORTCR(151, 0xe6051097), /* PORT151CR */
+	PORTCR(152, 0xe6051098), /* PORT152CR */
+	PORTCR(153, 0xe6051099), /* PORT153CR */
+	PORTCR(154, 0xe605109a), /* PORT154CR */
+	PORTCR(155, 0xe605109b), /* PORT155CR */
+	PORTCR(156, 0xe605109c), /* PORT156CR */
+	PORTCR(157, 0xe605109d), /* PORT157CR */
+	PORTCR(158, 0xe605109e), /* PORT158CR */
+	PORTCR(159, 0xe605109f), /* PORT159CR */
+
+	PORTCR(160, 0xe60510a0), /* PORT160CR */
+	PORTCR(161, 0xe60510a1), /* PORT161CR */
+	PORTCR(162, 0xe60510a2), /* PORT162CR */
+	PORTCR(163, 0xe60510a3), /* PORT163CR */
+	PORTCR(164, 0xe60510a4), /* PORT164CR */
+	PORTCR(165, 0xe60510a5), /* PORT165CR */
+	PORTCR(166, 0xe60510a6), /* PORT166CR */
+	PORTCR(167, 0xe60510a7), /* PORT167CR */
+	PORTCR(168, 0xe60510a8), /* PORT168CR */
+	PORTCR(169, 0xe60510a9), /* PORT169CR */
+
+	PORTCR(170, 0xe60510aa), /* PORT170CR */
+	PORTCR(171, 0xe60510ab), /* PORT171CR */
+	PORTCR(172, 0xe60510ac), /* PORT172CR */
+	PORTCR(173, 0xe60510ad), /* PORT173CR */
+	PORTCR(174, 0xe60510ae), /* PORT174CR */
+	PORTCR(175, 0xe60520af), /* PORT175CR */
+	PORTCR(176, 0xe60520b0), /* PORT176CR */
+	PORTCR(177, 0xe60520b1), /* PORT177CR */
+	PORTCR(178, 0xe60520b2), /* PORT178CR */
+	PORTCR(179, 0xe60520b3), /* PORT179CR */
+
+	PORTCR(180, 0xe60520b4), /* PORT180CR */
+	PORTCR(181, 0xe60520b5), /* PORT181CR */
+	PORTCR(182, 0xe60520b6), /* PORT182CR */
+	PORTCR(183, 0xe60520b7), /* PORT183CR */
+	PORTCR(184, 0xe60520b8), /* PORT184CR */
+	PORTCR(185, 0xe60520b9), /* PORT185CR */
+	PORTCR(186, 0xe60520ba), /* PORT186CR */
+	PORTCR(187, 0xe60520bb), /* PORT187CR */
+	PORTCR(188, 0xe60520bc), /* PORT188CR */
+	PORTCR(189, 0xe60520bd), /* PORT189CR */
+
+	PORTCR(190, 0xe60520be), /* PORT190CR */
+	PORTCR(191, 0xe60520bf), /* PORT191CR */
+	PORTCR(192, 0xe60520c0), /* PORT192CR */
+	PORTCR(193, 0xe60520c1), /* PORT193CR */
+	PORTCR(194, 0xe60520c2), /* PORT194CR */
+	PORTCR(195, 0xe60520c3), /* PORT195CR */
+	PORTCR(196, 0xe60520c4), /* PORT196CR */
+	PORTCR(197, 0xe60520c5), /* PORT197CR */
+	PORTCR(198, 0xe60520c6), /* PORT198CR */
+	PORTCR(199, 0xe60520c7), /* PORT199CR */
+
+	PORTCR(200, 0xe60520c8), /* PORT200CR */
+	PORTCR(201, 0xe60520c9), /* PORT201CR */
+	PORTCR(202, 0xe60520ca), /* PORT202CR */
+	PORTCR(203, 0xe60520cb), /* PORT203CR */
+	PORTCR(204, 0xe60520cc), /* PORT204CR */
+	PORTCR(205, 0xe60520cd), /* PORT205CR */
+	PORTCR(206, 0xe60520ce), /* PORT206CR */
+	PORTCR(207, 0xe60520cf), /* PORT207CR */
+	PORTCR(208, 0xe60520d0), /* PORT208CR */
+	PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+	PORTCR(210, 0xe60520d2), /* PORT210CR */
+	PORTCR(211, 0xe60520d3), /* PORT211CR */
+	PORTCR(212, 0xe60520d4), /* PORT212CR */
+	PORTCR(213, 0xe60520d5), /* PORT213CR */
+	PORTCR(214, 0xe60520d6), /* PORT214CR */
+	PORTCR(215, 0xe60520d7), /* PORT215CR */
+	PORTCR(216, 0xe60520d8), /* PORT216CR */
+	PORTCR(217, 0xe60520d9), /* PORT217CR */
+	PORTCR(218, 0xe60520da), /* PORT218CR */
+	PORTCR(219, 0xe60520db), /* PORT219CR */
+
+	PORTCR(220, 0xe60520dc), /* PORT220CR */
+	PORTCR(221, 0xe60520dd), /* PORT221CR */
+	PORTCR(222, 0xe60520de), /* PORT222CR */
+	PORTCR(223, 0xe60520df), /* PORT223CR */
+	PORTCR(224, 0xe60520e0), /* PORT224CR */
+	PORTCR(225, 0xe60520e1), /* PORT225CR */
+	PORTCR(226, 0xe60520e2), /* PORT226CR */
+	PORTCR(227, 0xe60520e3), /* PORT227CR */
+	PORTCR(228, 0xe60520e4), /* PORT228CR */
+	PORTCR(229, 0xe60520e5), /* PORT229CR */
+
+	PORTCR(230, 0xe60520e6), /* PORT230CR */
+	PORTCR(231, 0xe60520e7), /* PORT231CR */
+	PORTCR(232, 0xe60520e8), /* PORT232CR */
+	PORTCR(233, 0xe60520e9), /* PORT233CR */
+	PORTCR(234, 0xe60520ea), /* PORT234CR */
+	PORTCR(235, 0xe60520eb), /* PORT235CR */
+	PORTCR(236, 0xe60530ec), /* PORT236CR */
+	PORTCR(237, 0xe60530ed), /* PORT237CR */
+	PORTCR(238, 0xe60530ee), /* PORT238CR */
+	PORTCR(239, 0xe60530ef), /* PORT239CR */
+
+	PORTCR(240, 0xe60530f0), /* PORT240CR */
+	PORTCR(241, 0xe60530f1), /* PORT241CR */
+	PORTCR(242, 0xe60530f2), /* PORT242CR */
+	PORTCR(243, 0xe60530f3), /* PORT243CR */
+	PORTCR(244, 0xe60530f4), /* PORT244CR */
+	PORTCR(245, 0xe60530f5), /* PORT245CR */
+	PORTCR(246, 0xe60530f6), /* PORT246CR */
+	PORTCR(247, 0xe60530f7), /* PORT247CR */
+	PORTCR(248, 0xe60530f8), /* PORT248CR */
+	PORTCR(249, 0xe60530f9), /* PORT249CR */
+
+	PORTCR(250, 0xe60530fa), /* PORT250CR */
+	PORTCR(251, 0xe60530fb), /* PORT251CR */
+	PORTCR(252, 0xe60530fc), /* PORT252CR */
+	PORTCR(253, 0xe60530fd), /* PORT253CR */
+	PORTCR(254, 0xe60530fe), /* PORT254CR */
+	PORTCR(255, 0xe60530ff), /* PORT255CR */
+	PORTCR(256, 0xe6053100), /* PORT256CR */
+	PORTCR(257, 0xe6053101), /* PORT257CR */
+	PORTCR(258, 0xe6053102), /* PORT258CR */
+	PORTCR(259, 0xe6053103), /* PORT259CR */
+
+	PORTCR(260, 0xe6053104), /* PORT260CR */
+	PORTCR(261, 0xe6053105), /* PORT261CR */
+	PORTCR(262, 0xe6053106), /* PORT262CR */
+	PORTCR(263, 0xe6053107), /* PORT263CR */
+	PORTCR(264, 0xe6053108), /* PORT264CR */
+	PORTCR(265, 0xe6053109), /* PORT265CR */
+	PORTCR(266, 0xe605310a), /* PORT266CR */
+	PORTCR(267, 0xe605310b), /* PORT267CR */
+	PORTCR(268, 0xe605310c), /* PORT268CR */
+	PORTCR(269, 0xe605310d), /* PORT269CR */
+
+	PORTCR(270, 0xe605310e), /* PORT270CR */
+	PORTCR(271, 0xe605310f), /* PORT271CR */
+	PORTCR(272, 0xe6053110), /* PORT272CR */
+
+	{ PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) {
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		MSELBCR_MSEL2_0, MSELBCR_MSEL2_1,
+		0, 0,
+		0, 0 }
+	},
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
+		PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+		PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+		PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+		PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+		PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+		PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+		PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+		PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) {
+		PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+		PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+		PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+		PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+		PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+		PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+		PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+		PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) {
+		PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+		PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+		PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+		PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+		PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+		PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+		PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+		PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD127_096DR", 0xe6055004, 32) {
+		PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
+		PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA,
+		PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+		PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+		PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+		PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+		PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+		PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD159_128DR", 0xe6055008, 32) {
+		PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+		PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+		PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+		PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+		PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+		PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+		PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+		PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR191_160DR", 0xe6056000, 32) {
+		PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA,
+		PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
+		PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
+		PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
+		PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
+		PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
+		PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA,
+		PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR223_192DR", 0xe6056004, 32) {
+		PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
+		PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
+		PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
+		PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
+		PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+		PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+		PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+		PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) {
+		PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
+		PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
+		PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
+		PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
+		PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
+		PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
+		PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
+		PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, PORT272_DATA,
+		PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA,
+		PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA,
+		PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
+		PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7367_pinmux_info = {
+	.name = "sh7367_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PORT0,
+	.last_gpio = GPIO_FN_DIVLOCK,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7367_pinmux_init(void)
+{
+	register_pinmux(&sh7367_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
new file mode 100644
index 0000000..9557d09
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -0,0 +1,1637 @@
+/*
+ * sh7372 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010  Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on
+ * sh7367 processor support - PFC hardware block
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7372.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx)				\
+	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
+	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
+	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
+	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
+	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _80(fn, pfx, sfx)				\
+	_10(fn, pfx##1, sfx),	_10(fn, pfx##2, sfx),	\
+	_10(fn, pfx##3, sfx),	_10(fn, pfx##4, sfx),	\
+	_10(fn, pfx##5, sfx),	_10(fn, pfx##6, sfx),	\
+	_10(fn, pfx##7, sfx),	_10(fn, pfx##8, sfx)
+
+#define _190(fn, pfx, sfx) \
+	_10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \
+	_10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_ALL(str) _190(_PORT, PORT, str)
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	/* PORT0_DATA -> PORT190_DATA */
+	PINMUX_DATA_BEGIN,
+	PORT_ALL(DATA),
+	PINMUX_DATA_END,
+
+	/* PORT0_IN -> PORT190_IN */
+	PINMUX_INPUT_BEGIN,
+	PORT_ALL(IN),
+	PINMUX_INPUT_END,
+
+	/* PORT0_IN_PU -> PORT190_IN_PU */
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PORT_ALL(IN_PU),
+	PINMUX_INPUT_PULLUP_END,
+
+	/* PORT0_IN_PD -> PORT190_IN_PD */
+	PINMUX_INPUT_PULLDOWN_BEGIN,
+	PORT_ALL(IN_PD),
+	PINMUX_INPUT_PULLDOWN_END,
+
+	/* PORT0_OUT -> PORT190_OUT */
+	PINMUX_OUTPUT_BEGIN,
+	PORT_ALL(OUT),
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PORT_ALL(FN_IN),	/* PORT0_FN_IN	-> PORT190_FN_IN */
+	PORT_ALL(FN_OUT),	/* PORT0_FN_OUT	-> PORT190_FN_OUT */
+	PORT_ALL(FN0),		/* PORT0_FN0	-> PORT190_FN0 */
+	PORT_ALL(FN1),		/* PORT0_FN1	-> PORT190_FN1 */
+	PORT_ALL(FN2),		/* PORT0_FN2	-> PORT190_FN2 */
+	PORT_ALL(FN3),		/* PORT0_FN3	-> PORT190_FN3 */
+	PORT_ALL(FN4),		/* PORT0_FN4	-> PORT190_FN4 */
+	PORT_ALL(FN5),		/* PORT0_FN5	-> PORT190_FN5 */
+	PORT_ALL(FN6),		/* PORT0_FN6	-> PORT190_FN6 */
+	PORT_ALL(FN7),		/* PORT0_FN7	-> PORT190_FN7 */
+
+	MSEL1CR_31_0,	MSEL1CR_31_1,
+	MSEL1CR_30_0,	MSEL1CR_30_1,
+	MSEL1CR_29_0,	MSEL1CR_29_1,
+	MSEL1CR_28_0,	MSEL1CR_28_1,
+	MSEL1CR_27_0,	MSEL1CR_27_1,
+	MSEL1CR_26_0,	MSEL1CR_26_1,
+	MSEL1CR_16_0,	MSEL1CR_16_1,
+	MSEL1CR_15_0,	MSEL1CR_15_1,
+	MSEL1CR_14_0,	MSEL1CR_14_1,
+	MSEL1CR_13_0,	MSEL1CR_13_1,
+	MSEL1CR_12_0,	MSEL1CR_12_1,
+	MSEL1CR_9_0,	MSEL1CR_9_1,
+	MSEL1CR_8_0,	MSEL1CR_8_1,
+	MSEL1CR_7_0,	MSEL1CR_7_1,
+	MSEL1CR_6_0,	MSEL1CR_6_1,
+	MSEL1CR_4_0,	MSEL1CR_4_1,
+	MSEL1CR_3_0,	MSEL1CR_3_1,
+	MSEL1CR_2_0,	MSEL1CR_2_1,
+	MSEL1CR_0_0,	MSEL1CR_0_1,
+
+	MSEL3CR_27_0,	MSEL3CR_27_1,
+	MSEL3CR_26_0,	MSEL3CR_26_1,
+	MSEL3CR_21_0,	MSEL3CR_21_1,
+	MSEL3CR_20_0,	MSEL3CR_20_1,
+	MSEL3CR_15_0,	MSEL3CR_15_1,
+	MSEL3CR_9_0,	MSEL3CR_9_1,
+	MSEL3CR_6_0,	MSEL3CR_6_1,
+
+	MSEL4CR_19_0,	MSEL4CR_19_1,
+	MSEL4CR_18_0,	MSEL4CR_18_1,
+	MSEL4CR_17_0,	MSEL4CR_17_1,
+	MSEL4CR_16_0,	MSEL4CR_16_1,
+	MSEL4CR_15_0,	MSEL4CR_15_1,
+	MSEL4CR_14_0,	MSEL4CR_14_1,
+	MSEL4CR_10_0,	MSEL4CR_10_1,
+	MSEL4CR_6_0,	MSEL4CR_6_1,
+	MSEL4CR_4_0,	MSEL4CR_4_1,
+	MSEL4CR_1_0,	MSEL4CR_1_1,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+
+	/* IRQ */
+	IRQ0_6_MARK,	IRQ0_162_MARK,	IRQ1_MARK,	IRQ2_4_MARK,
+	IRQ2_5_MARK,	IRQ3_8_MARK,	IRQ3_16_MARK,	IRQ4_17_MARK,
+	IRQ4_163_MARK,	IRQ5_MARK,	IRQ6_39_MARK,	IRQ6_164_MARK,
+	IRQ7_40_MARK,	IRQ7_167_MARK,	IRQ8_41_MARK,	IRQ8_168_MARK,
+	IRQ9_42_MARK,	IRQ9_169_MARK,	IRQ10_MARK,	IRQ11_MARK,
+	IRQ12_80_MARK,	IRQ12_137_MARK,	IRQ13_81_MARK,	IRQ13_145_MARK,
+	IRQ14_82_MARK,	IRQ14_146_MARK,	IRQ15_83_MARK,	IRQ15_147_MARK,
+	IRQ16_84_MARK,	IRQ16_170_MARK,	IRQ17_MARK,	IRQ18_MARK,
+	IRQ19_MARK,	IRQ20_MARK,	IRQ21_MARK,	IRQ22_MARK,
+	IRQ23_MARK,	IRQ24_MARK,	IRQ25_MARK,	IRQ26_121_MARK,
+	IRQ26_172_MARK,	IRQ27_122_MARK,	IRQ27_180_MARK,	IRQ28_123_MARK,
+	IRQ28_181_MARK,	IRQ29_129_MARK,	IRQ29_182_MARK,	IRQ30_130_MARK,
+	IRQ30_183_MARK,	IRQ31_138_MARK,	IRQ31_184_MARK,
+
+	/* MSIOF0 */
+	MSIOF0_TSYNC_MARK,	MSIOF0_TSCK_MARK,	MSIOF0_RXD_MARK,
+	MSIOF0_RSCK_MARK,	MSIOF0_RSYNC_MARK,	MSIOF0_MCK0_MARK,
+	MSIOF0_MCK1_MARK,	MSIOF0_SS1_MARK,	MSIOF0_SS2_MARK,
+	MSIOF0_TXD_MARK,
+
+	/* MSIOF1 */
+	MSIOF1_TSCK_39_MARK,	MSIOF1_TSYNC_40_MARK,
+	MSIOF1_TSCK_88_MARK,	MSIOF1_TSYNC_89_MARK,
+	MSIOF1_TXD_41_MARK,	MSIOF1_RXD_42_MARK,
+	MSIOF1_TXD_90_MARK,	MSIOF1_RXD_91_MARK,
+	MSIOF1_SS1_43_MARK,	MSIOF1_SS2_44_MARK,
+	MSIOF1_SS1_92_MARK,	MSIOF1_SS2_93_MARK,
+	MSIOF1_RSCK_MARK,	MSIOF1_RSYNC_MARK,
+	MSIOF1_MCK0_MARK,	MSIOF1_MCK1_MARK,
+
+	/* MSIOF2 */
+	MSIOF2_RSCK_MARK,	MSIOF2_RSYNC_MARK,	MSIOF2_MCK0_MARK,
+	MSIOF2_MCK1_MARK,	MSIOF2_SS1_MARK,	MSIOF2_SS2_MARK,
+	MSIOF2_TSYNC_MARK,	MSIOF2_TSCK_MARK,	MSIOF2_RXD_MARK,
+	MSIOF2_TXD_MARK,
+
+	/* MSIOF3 */
+	BBIF1_RXD_MARK,		BBIF1_TSYNC_MARK,	BBIF1_TSCK_MARK,
+	BBIF1_TXD_MARK,		BBIF1_RSCK_MARK,	BBIF1_RSYNC_MARK,
+	BBIF1_FLOW_MARK,	BB_RX_FLOW_N_MARK,
+
+	/* MSIOF4 */
+	BBIF2_TSCK1_MARK,	BBIF2_TSYNC1_MARK,
+	BBIF2_TXD1_MARK,	BBIF2_RXD_MARK,
+
+	/* FSI */
+	FSIACK_MARK,	FSIBCK_MARK,		FSIAILR_MARK,	FSIAIBT_MARK,
+	FSIAISLD_MARK,	FSIAOMC_MARK,		FSIAOLR_MARK,	FSIAOBT_MARK,
+	FSIAOSLD_MARK,	FSIASPDIF_11_MARK,	FSIASPDIF_15_MARK,
+
+	/* FMSI */
+	FMSOCK_MARK,	FMSOOLR_MARK,	FMSIOLR_MARK,	FMSOOBT_MARK,
+	FMSIOBT_MARK,	FMSOSLD_MARK,	FMSOILR_MARK,	FMSIILR_MARK,
+	FMSOIBT_MARK,	FMSIIBT_MARK,	FMSISLD_MARK,	FMSICK_MARK,
+
+	/* SCIFA0 */
+	SCIFA0_TXD_MARK,	SCIFA0_RXD_MARK,	SCIFA0_SCK_MARK,
+	SCIFA0_RTS_MARK,	SCIFA0_CTS_MARK,
+
+	/* SCIFA1 */
+	SCIFA1_TXD_MARK,	SCIFA1_RXD_MARK,	SCIFA1_SCK_MARK,
+	SCIFA1_RTS_MARK,	SCIFA1_CTS_MARK,
+
+	/* SCIFA2 */
+	SCIFA2_CTS1_MARK,	SCIFA2_RTS1_MARK,	SCIFA2_TXD1_MARK,
+	SCIFA2_RXD1_MARK,	SCIFA2_SCK1_MARK,
+
+	/* SCIFA3 */
+	SCIFA3_CTS_43_MARK,	SCIFA3_CTS_140_MARK,	SCIFA3_RTS_44_MARK,
+	SCIFA3_RTS_141_MARK,	SCIFA3_SCK_MARK,	SCIFA3_TXD_MARK,
+	SCIFA3_RXD_MARK,
+
+	/* SCIFA4 */
+	SCIFA4_RXD_MARK,	SCIFA4_TXD_MARK,
+
+	/* SCIFA5 */
+	SCIFA5_RXD_MARK,	SCIFA5_TXD_MARK,
+
+	/* SCIFB */
+	SCIFB_SCK_MARK,	SCIFB_RTS_MARK,	SCIFB_CTS_MARK,
+	SCIFB_TXD_MARK,	SCIFB_RXD_MARK,
+
+	/* CEU */
+	VIO_HD_MARK,	VIO_CKO1_MARK,	VIO_CKO2_MARK,	VIO_VD_MARK,
+	VIO_CLK_MARK,	VIO_FIELD_MARK,	VIO_CKO_MARK,
+	VIO_D0_MARK,	VIO_D1_MARK,	VIO_D2_MARK,	VIO_D3_MARK,
+	VIO_D4_MARK,	VIO_D5_MARK,	VIO_D6_MARK,	VIO_D7_MARK,
+	VIO_D8_MARK,	VIO_D9_MARK,	VIO_D10_MARK,	VIO_D11_MARK,
+	VIO_D12_MARK,	VIO_D13_MARK,	VIO_D14_MARK,	VIO_D15_MARK,
+
+	/* USB0 */
+	IDIN_0_MARK,	EXTLP_0_MARK,	OVCN2_0_MARK,	PWEN_0_MARK,
+	OVCN_0_MARK,	VBUS0_0_MARK,
+
+	/* USB1 */
+	IDIN_1_18_MARK,		IDIN_1_113_MARK,
+	PWEN_1_115_MARK,	PWEN_1_138_MARK,
+	OVCN_1_114_MARK,	OVCN_1_162_MARK,
+	EXTLP_1_MARK,		OVCN2_1_MARK,
+	VBUS0_1_MARK,
+
+	/* GPIO */
+	GPI0_MARK,	GPI1_MARK,	GPO0_MARK,	GPO1_MARK,
+
+	/* BSC */
+	BS_MARK,	WE1_MARK,
+	CKO_MARK,	WAIT_MARK,	RDWR_MARK,
+
+	A0_MARK,	A1_MARK,	A2_MARK,	A3_MARK,
+	A6_MARK,	A7_MARK,	A8_MARK,	A9_MARK,
+	A10_MARK,	A11_MARK,	A12_MARK,	A13_MARK,
+	A14_MARK,	A15_MARK,	A16_MARK,	A17_MARK,
+	A18_MARK,	A19_MARK,	A20_MARK,	A21_MARK,
+	A22_MARK,	A23_MARK,	A24_MARK,	A25_MARK,
+	A26_MARK,
+
+	CS0_MARK,	CS2_MARK,	CS4_MARK,
+	CS5A_MARK,	CS5B_MARK,	CS6A_MARK,
+
+	/* BSC/FLCTL */
+	RD_FSC_MARK,	WE0_FWE_MARK,	A4_FOE_MARK,	A5_FCDE_MARK,
+	D0_NAF0_MARK,	D1_NAF1_MARK,	D2_NAF2_MARK,	D3_NAF3_MARK,
+	D4_NAF4_MARK,	D5_NAF5_MARK,	D6_NAF6_MARK,	D7_NAF7_MARK,
+	D8_NAF8_MARK,	D9_NAF9_MARK,	D10_NAF10_MARK,	D11_NAF11_MARK,
+	D12_NAF12_MARK,	D13_NAF13_MARK,	D14_NAF14_MARK,	D15_NAF15_MARK,
+
+	/* MMCIF(1) */
+	MMCD0_0_MARK,	MMCD0_1_MARK,	MMCD0_2_MARK,	MMCD0_3_MARK,
+	MMCD0_4_MARK,	MMCD0_5_MARK,	MMCD0_6_MARK,	MMCD0_7_MARK,
+	MMCCMD0_MARK,	MMCCLK0_MARK,
+
+	/* MMCIF(2) */
+	MMCD1_0_MARK,	MMCD1_1_MARK,	MMCD1_2_MARK,	MMCD1_3_MARK,
+	MMCD1_4_MARK,	MMCD1_5_MARK,	MMCD1_6_MARK,	MMCD1_7_MARK,
+	MMCCLK1_MARK,	MMCCMD1_MARK,
+
+	/* SPU2 */
+	VINT_I_MARK,
+
+	/* FLCTL */
+	FCE1_MARK,	FCE0_MARK,	FRB_MARK,
+
+	/* HSI */
+	GP_RX_FLAG_MARK,	GP_RX_DATA_MARK,	GP_TX_READY_MARK,
+	GP_RX_WAKE_MARK,	MP_TX_FLAG_MARK,	MP_TX_DATA_MARK,
+	MP_RX_READY_MARK,	MP_TX_WAKE_MARK,
+
+	/* MFI */
+	MFIv6_MARK,
+	MFIv4_MARK,
+
+	MEMC_CS0_MARK,			MEMC_BUSCLK_MEMC_A0_MARK,
+	MEMC_CS1_MEMC_A1_MARK,		MEMC_ADV_MEMC_DREQ0_MARK,
+	MEMC_WAIT_MEMC_DREQ1_MARK,	MEMC_NOE_MARK,
+	MEMC_NWE_MARK,			MEMC_INT_MARK,
+
+	MEMC_AD0_MARK,	MEMC_AD1_MARK,	MEMC_AD2_MARK,
+	MEMC_AD3_MARK,	MEMC_AD4_MARK,	MEMC_AD5_MARK,
+	MEMC_AD6_MARK,	MEMC_AD7_MARK,	MEMC_AD8_MARK,
+	MEMC_AD9_MARK,	MEMC_AD10_MARK,	MEMC_AD11_MARK,
+	MEMC_AD12_MARK,	MEMC_AD13_MARK,	MEMC_AD14_MARK,
+	MEMC_AD15_MARK,
+
+	/* SIM */
+	SIM_RST_MARK,	SIM_CLK_MARK,	SIM_D_MARK,
+
+	/* TPU */
+	TPU0TO0_MARK,		TPU0TO1_MARK,
+	TPU0TO2_93_MARK,	TPU0TO2_99_MARK,
+	TPU0TO3_MARK,
+
+	/* I2C2 */
+	I2C_SCL2_MARK,	I2C_SDA2_MARK,
+
+	/* I2C3(1) */
+	I2C_SCL3_MARK,	I2C_SDA3_MARK,
+
+	/* I2C3(2) */
+	I2C_SCL3S_MARK,	I2C_SDA3S_MARK,
+
+	/* I2C4(2) */
+	I2C_SCL4_MARK,	I2C_SDA4_MARK,
+
+	/* I2C4(2) */
+	I2C_SCL4S_MARK,	I2C_SDA4S_MARK,
+
+	/* KEYSC */
+	KEYOUT0_MARK,	KEYIN0_121_MARK,	KEYIN0_136_MARK,
+	KEYOUT1_MARK,	KEYIN1_122_MARK,	KEYIN1_135_MARK,
+	KEYOUT2_MARK,	KEYIN2_123_MARK,	KEYIN2_134_MARK,
+	KEYOUT3_MARK,	KEYIN3_124_MARK,	KEYIN3_133_MARK,
+	KEYOUT4_MARK,	KEYIN4_MARK,
+	KEYOUT5_MARK,	KEYIN5_MARK,
+	KEYOUT6_MARK,	KEYIN6_MARK,
+	KEYOUT7_MARK,	KEYIN7_MARK,
+
+	/* LCDC */
+	LCDC0_SELECT_MARK,
+	LCDC1_SELECT_MARK,
+	LCDHSYN_MARK,	LCDCS_MARK,	LCDVSYN_MARK,	LCDDCK_MARK,
+	LCDWR_MARK,	LCDRD_MARK,	LCDDISP_MARK,	LCDRS_MARK,
+	LCDLCLK_MARK,	LCDDON_MARK,
+
+	LCDD0_MARK,	LCDD1_MARK,	LCDD2_MARK,	LCDD3_MARK,
+	LCDD4_MARK,	LCDD5_MARK,	LCDD6_MARK,	LCDD7_MARK,
+	LCDD8_MARK,	LCDD9_MARK,	LCDD10_MARK,	LCDD11_MARK,
+	LCDD12_MARK,	LCDD13_MARK,	LCDD14_MARK,	LCDD15_MARK,
+	LCDD16_MARK,	LCDD17_MARK,	LCDD18_MARK,	LCDD19_MARK,
+	LCDD20_MARK,	LCDD21_MARK,	LCDD22_MARK,	LCDD23_MARK,
+
+	/* IRDA */
+	IRDA_OUT_MARK,	IRDA_IN_MARK,	IRDA_FIRSEL_MARK,
+	IROUT_139_MARK,	IROUT_140_MARK,
+
+	/* TSIF1 */
+	TS0_1SELECT_MARK,
+	TS0_2SELECT_MARK,
+	TS1_1SELECT_MARK,
+	TS1_2SELECT_MARK,
+
+	TS_SPSYNC1_MARK,	TS_SDAT1_MARK,
+	TS_SDEN1_MARK,		TS_SCK1_MARK,
+
+	/* TSIF2 */
+	TS_SPSYNC2_MARK,	TS_SDAT2_MARK,
+	TS_SDEN2_MARK,		TS_SCK2_MARK,
+
+	/* HDMI */
+	HDMI_HPD_MARK,	HDMI_CEC_MARK,
+
+	/* SDHI0 */
+	SDHICLK0_MARK,	SDHICD0_MARK,
+	SDHICMD0_MARK,	SDHIWP0_MARK,
+	SDHID0_0_MARK,	SDHID0_1_MARK,
+	SDHID0_2_MARK,	SDHID0_3_MARK,
+
+	/* SDHI1 */
+	SDHICLK1_MARK,	SDHICMD1_MARK,	SDHID1_0_MARK,
+	SDHID1_1_MARK,	SDHID1_2_MARK,	SDHID1_3_MARK,
+
+	/* SDHI2 */
+	SDHICLK2_MARK,	SDHICMD2_MARK,	SDHID2_0_MARK,
+	SDHID2_1_MARK,	SDHID2_2_MARK,	SDHID2_3_MARK,
+
+	/* SDENC */
+	SDENC_CPG_MARK,
+	SDENC_DV_CLKI_MARK,
+
+	PINMUX_MARK_END,
+};
+
+/* PORT_DATA_I_PD(nr) */
+#define _I___D(nr)			     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+/* PORT_DATA_I_PU(nr) */
+#define _I__U_(nr)			     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+/* PORT_DATA_I_PU_PD(nr) */
+#define _I__UD(nr)			     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+/* PORT_DATA_O(nr) */
+#define __O___(nr)							\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+/* PORT_DATA_IO(nr) */
+#define _IO___(nr)				     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN)
+
+/* PORT_DATA_IO_PD(nr) */
+#define _IO__D(nr)					     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+/* PORT_DATA_IO_PU(nr) */
+#define _IO_U_(nr)					     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+/* PORT_DATA_IO_PU_PD(nr) */
+#define _IO_UD(nr)					     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+
+static pinmux_enum_t pinmux_data[] = {
+
+	/* specify valid pin states for each pin in GPIO mode */
+
+	_IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4),
+	_I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9),
+
+	__O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14),
+	__O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19),
+
+	_IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24),
+	_IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29),
+
+	_IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34),
+	_IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39),
+
+	_IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44),
+	_IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49),
+
+	_IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54),
+	_IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59),
+
+	_IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64),
+	_IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/
+
+	_IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74),
+	_IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79),
+
+	_IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84),
+	_IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89),
+
+	_IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94),
+	_IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/
+
+	_IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104),
+	_IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109),
+
+	_IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114),
+	_IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119),
+
+	_IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124),
+	_IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129),
+
+	_IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134),
+	_IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139),
+
+	_IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144),
+	_IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149),
+
+	_IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154),
+	_I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159),
+
+	__O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164),
+	_IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169),
+
+	_I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174),
+	_IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179),
+
+	_IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184),
+	__O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189),
+
+	_IO_UD(190),
+
+	/* IRQ */
+	PINMUX_DATA(IRQ0_6_MARK,	PORT6_FN0, 	MSEL1CR_0_0),
+	PINMUX_DATA(IRQ0_162_MARK,	PORT162_FN0,	MSEL1CR_0_1),
+	PINMUX_DATA(IRQ1_MARK,		PORT12_FN0),
+	PINMUX_DATA(IRQ2_4_MARK,	PORT4_FN0,	MSEL1CR_2_0),
+	PINMUX_DATA(IRQ2_5_MARK,	PORT5_FN0,	MSEL1CR_2_1),
+	PINMUX_DATA(IRQ3_8_MARK,	PORT8_FN0,	MSEL1CR_3_0),
+	PINMUX_DATA(IRQ3_16_MARK,	PORT16_FN0,	MSEL1CR_3_1),
+	PINMUX_DATA(IRQ4_17_MARK,	PORT17_FN0,	MSEL1CR_4_0),
+	PINMUX_DATA(IRQ4_163_MARK,	PORT163_FN0,	MSEL1CR_4_1),
+	PINMUX_DATA(IRQ5_MARK,		PORT18_FN0),
+	PINMUX_DATA(IRQ6_39_MARK,	PORT39_FN0,	MSEL1CR_6_0),
+	PINMUX_DATA(IRQ6_164_MARK,	PORT164_FN0,	MSEL1CR_6_1),
+	PINMUX_DATA(IRQ7_40_MARK,	PORT40_FN0,	MSEL1CR_7_1),
+	PINMUX_DATA(IRQ7_167_MARK,	PORT167_FN0,	MSEL1CR_7_0),
+	PINMUX_DATA(IRQ8_41_MARK,	PORT41_FN0,	MSEL1CR_8_1),
+	PINMUX_DATA(IRQ8_168_MARK,	PORT168_FN0,	MSEL1CR_8_0),
+	PINMUX_DATA(IRQ9_42_MARK,	PORT42_FN0,	MSEL1CR_9_0),
+	PINMUX_DATA(IRQ9_169_MARK,	PORT169_FN0,	MSEL1CR_9_1),
+	PINMUX_DATA(IRQ10_MARK,		PORT65_FN0,	MSEL1CR_9_1),
+	PINMUX_DATA(IRQ11_MARK,		PORT67_FN0),
+	PINMUX_DATA(IRQ12_80_MARK,	PORT80_FN0,	MSEL1CR_12_0),
+	PINMUX_DATA(IRQ12_137_MARK,	PORT137_FN0,	MSEL1CR_12_1),
+	PINMUX_DATA(IRQ13_81_MARK,	PORT81_FN0,	MSEL1CR_13_0),
+	PINMUX_DATA(IRQ13_145_MARK,	PORT145_FN0,	MSEL1CR_13_1),
+	PINMUX_DATA(IRQ14_82_MARK,	PORT82_FN0,	MSEL1CR_14_0),
+	PINMUX_DATA(IRQ14_146_MARK,	PORT146_FN0,	MSEL1CR_14_1),
+	PINMUX_DATA(IRQ15_83_MARK,	PORT83_FN0,	MSEL1CR_15_0),
+	PINMUX_DATA(IRQ15_147_MARK,	PORT147_FN0,	MSEL1CR_15_1),
+	PINMUX_DATA(IRQ16_84_MARK,	PORT84_FN0,	MSEL1CR_16_0),
+	PINMUX_DATA(IRQ16_170_MARK,	PORT170_FN0,	MSEL1CR_16_1),
+	PINMUX_DATA(IRQ17_MARK,		PORT85_FN0),
+	PINMUX_DATA(IRQ18_MARK,		PORT86_FN0),
+	PINMUX_DATA(IRQ19_MARK,		PORT87_FN0),
+	PINMUX_DATA(IRQ20_MARK,		PORT92_FN0),
+	PINMUX_DATA(IRQ21_MARK,		PORT93_FN0),
+	PINMUX_DATA(IRQ22_MARK,		PORT94_FN0),
+	PINMUX_DATA(IRQ23_MARK,		PORT95_FN0),
+	PINMUX_DATA(IRQ24_MARK,		PORT112_FN0),
+	PINMUX_DATA(IRQ25_MARK,		PORT119_FN0),
+	PINMUX_DATA(IRQ26_121_MARK,	PORT121_FN0,	MSEL1CR_26_1),
+	PINMUX_DATA(IRQ26_172_MARK,	PORT172_FN0,	MSEL1CR_26_0),
+	PINMUX_DATA(IRQ27_122_MARK,	PORT122_FN0,	MSEL1CR_27_1),
+	PINMUX_DATA(IRQ27_180_MARK,	PORT180_FN0,	MSEL1CR_27_0),
+	PINMUX_DATA(IRQ28_123_MARK,	PORT123_FN0,	MSEL1CR_28_1),
+	PINMUX_DATA(IRQ28_181_MARK,	PORT181_FN0,	MSEL1CR_28_0),
+	PINMUX_DATA(IRQ29_129_MARK,	PORT129_FN0,	MSEL1CR_29_1),
+	PINMUX_DATA(IRQ29_182_MARK,	PORT182_FN0,	MSEL1CR_29_0),
+	PINMUX_DATA(IRQ30_130_MARK,	PORT130_FN0,	MSEL1CR_30_1),
+	PINMUX_DATA(IRQ30_183_MARK,	PORT183_FN0,	MSEL1CR_30_0),
+	PINMUX_DATA(IRQ31_138_MARK,	PORT138_FN0,	MSEL1CR_31_1),
+	PINMUX_DATA(IRQ31_184_MARK,	PORT184_FN0,	MSEL1CR_31_0),
+
+	/* Function 1 */
+	PINMUX_DATA(BBIF2_TSCK1_MARK,		PORT0_FN1),
+	PINMUX_DATA(BBIF2_TSYNC1_MARK,		PORT1_FN1),
+	PINMUX_DATA(BBIF2_TXD1_MARK,		PORT2_FN1),
+	PINMUX_DATA(BBIF2_RXD_MARK,		PORT3_FN1),
+	PINMUX_DATA(FSIACK_MARK,		PORT4_FN1),
+	PINMUX_DATA(FSIAILR_MARK,		PORT5_FN1),
+	PINMUX_DATA(FSIAIBT_MARK,		PORT6_FN1),
+	PINMUX_DATA(FSIAISLD_MARK,		PORT7_FN1),
+	PINMUX_DATA(FSIAOMC_MARK,		PORT8_FN1),
+	PINMUX_DATA(FSIAOLR_MARK,		PORT9_FN1),
+	PINMUX_DATA(FSIAOBT_MARK,		PORT10_FN1),
+	PINMUX_DATA(FSIAOSLD_MARK,		PORT11_FN1),
+	PINMUX_DATA(FMSOCK_MARK,		PORT12_FN1),
+	PINMUX_DATA(FMSOOLR_MARK,		PORT13_FN1),
+	PINMUX_DATA(FMSOOBT_MARK,		PORT14_FN1),
+	PINMUX_DATA(FMSOSLD_MARK,		PORT15_FN1),
+	PINMUX_DATA(FMSOILR_MARK,		PORT16_FN1),
+	PINMUX_DATA(FMSOIBT_MARK,		PORT17_FN1),
+	PINMUX_DATA(FMSISLD_MARK,		PORT18_FN1),
+	PINMUX_DATA(A0_MARK,			PORT19_FN1),
+	PINMUX_DATA(A1_MARK,			PORT20_FN1),
+	PINMUX_DATA(A2_MARK,			PORT21_FN1),
+	PINMUX_DATA(A3_MARK,			PORT22_FN1),
+	PINMUX_DATA(A4_FOE_MARK,		PORT23_FN1),
+	PINMUX_DATA(A5_FCDE_MARK,		PORT24_FN1),
+	PINMUX_DATA(A6_MARK,			PORT25_FN1),
+	PINMUX_DATA(A7_MARK,			PORT26_FN1),
+	PINMUX_DATA(A8_MARK,			PORT27_FN1),
+	PINMUX_DATA(A9_MARK,			PORT28_FN1),
+	PINMUX_DATA(A10_MARK,			PORT29_FN1),
+	PINMUX_DATA(A11_MARK,			PORT30_FN1),
+	PINMUX_DATA(A12_MARK,			PORT31_FN1),
+	PINMUX_DATA(A13_MARK,			PORT32_FN1),
+	PINMUX_DATA(A14_MARK,			PORT33_FN1),
+	PINMUX_DATA(A15_MARK,			PORT34_FN1),
+	PINMUX_DATA(A16_MARK,			PORT35_FN1),
+	PINMUX_DATA(A17_MARK,			PORT36_FN1),
+	PINMUX_DATA(A18_MARK,			PORT37_FN1),
+	PINMUX_DATA(A19_MARK,			PORT38_FN1),
+	PINMUX_DATA(A20_MARK,			PORT39_FN1),
+	PINMUX_DATA(A21_MARK,			PORT40_FN1),
+	PINMUX_DATA(A22_MARK,			PORT41_FN1),
+	PINMUX_DATA(A23_MARK,			PORT42_FN1),
+	PINMUX_DATA(A24_MARK,			PORT43_FN1),
+	PINMUX_DATA(A25_MARK,			PORT44_FN1),
+	PINMUX_DATA(A26_MARK,			PORT45_FN1),
+	PINMUX_DATA(D0_NAF0_MARK,		PORT46_FN1),
+	PINMUX_DATA(D1_NAF1_MARK,		PORT47_FN1),
+	PINMUX_DATA(D2_NAF2_MARK,		PORT48_FN1),
+	PINMUX_DATA(D3_NAF3_MARK,		PORT49_FN1),
+	PINMUX_DATA(D4_NAF4_MARK,		PORT50_FN1),
+	PINMUX_DATA(D5_NAF5_MARK,		PORT51_FN1),
+	PINMUX_DATA(D6_NAF6_MARK,		PORT52_FN1),
+	PINMUX_DATA(D7_NAF7_MARK,		PORT53_FN1),
+	PINMUX_DATA(D8_NAF8_MARK,		PORT54_FN1),
+	PINMUX_DATA(D9_NAF9_MARK,		PORT55_FN1),
+	PINMUX_DATA(D10_NAF10_MARK,		PORT56_FN1),
+	PINMUX_DATA(D11_NAF11_MARK,		PORT57_FN1),
+	PINMUX_DATA(D12_NAF12_MARK,		PORT58_FN1),
+	PINMUX_DATA(D13_NAF13_MARK,		PORT59_FN1),
+	PINMUX_DATA(D14_NAF14_MARK,		PORT60_FN1),
+	PINMUX_DATA(D15_NAF15_MARK,		PORT61_FN1),
+	PINMUX_DATA(CS0_MARK,			PORT62_FN1),
+	PINMUX_DATA(CS2_MARK,			PORT63_FN1),
+	PINMUX_DATA(CS4_MARK,			PORT64_FN1),
+	PINMUX_DATA(CS5A_MARK,			PORT65_FN1),
+	PINMUX_DATA(CS5B_MARK,			PORT66_FN1),
+	PINMUX_DATA(CS6A_MARK,			PORT67_FN1),
+	PINMUX_DATA(FCE0_MARK,			PORT68_FN1),
+	PINMUX_DATA(RD_FSC_MARK,		PORT69_FN1),
+	PINMUX_DATA(WE0_FWE_MARK,		PORT70_FN1),
+	PINMUX_DATA(WE1_MARK,			PORT71_FN1),
+	PINMUX_DATA(CKO_MARK,			PORT72_FN1),
+	PINMUX_DATA(FRB_MARK,			PORT73_FN1),
+	PINMUX_DATA(WAIT_MARK,			PORT74_FN1),
+	PINMUX_DATA(RDWR_MARK,			PORT75_FN1),
+	PINMUX_DATA(MEMC_AD0_MARK,		PORT76_FN1),
+	PINMUX_DATA(MEMC_AD1_MARK,		PORT77_FN1),
+	PINMUX_DATA(MEMC_AD2_MARK,		PORT78_FN1),
+	PINMUX_DATA(MEMC_AD3_MARK,		PORT79_FN1),
+	PINMUX_DATA(MEMC_AD4_MARK,		PORT80_FN1),
+	PINMUX_DATA(MEMC_AD5_MARK,		PORT81_FN1),
+	PINMUX_DATA(MEMC_AD6_MARK,		PORT82_FN1),
+	PINMUX_DATA(MEMC_AD7_MARK,		PORT83_FN1),
+	PINMUX_DATA(MEMC_AD8_MARK,		PORT84_FN1),
+	PINMUX_DATA(MEMC_AD9_MARK,		PORT85_FN1),
+	PINMUX_DATA(MEMC_AD10_MARK,		PORT86_FN1),
+	PINMUX_DATA(MEMC_AD11_MARK,		PORT87_FN1),
+	PINMUX_DATA(MEMC_AD12_MARK,		PORT88_FN1),
+	PINMUX_DATA(MEMC_AD13_MARK,		PORT89_FN1),
+	PINMUX_DATA(MEMC_AD14_MARK,		PORT90_FN1),
+	PINMUX_DATA(MEMC_AD15_MARK,		PORT91_FN1),
+	PINMUX_DATA(MEMC_CS0_MARK,		PORT92_FN1),
+	PINMUX_DATA(MEMC_BUSCLK_MEMC_A0_MARK,	PORT93_FN1),
+	PINMUX_DATA(MEMC_CS1_MEMC_A1_MARK,	PORT94_FN1),
+	PINMUX_DATA(MEMC_ADV_MEMC_DREQ0_MARK,	PORT95_FN1),
+	PINMUX_DATA(MEMC_WAIT_MEMC_DREQ1_MARK,	PORT96_FN1),
+	PINMUX_DATA(MEMC_NOE_MARK,		PORT97_FN1),
+	PINMUX_DATA(MEMC_NWE_MARK,		PORT98_FN1),
+	PINMUX_DATA(MEMC_INT_MARK,		PORT99_FN1),
+	PINMUX_DATA(VIO_VD_MARK,		PORT100_FN1),
+	PINMUX_DATA(VIO_HD_MARK,		PORT101_FN1),
+	PINMUX_DATA(VIO_D0_MARK,		PORT102_FN1),
+	PINMUX_DATA(VIO_D1_MARK,		PORT103_FN1),
+	PINMUX_DATA(VIO_D2_MARK,		PORT104_FN1),
+	PINMUX_DATA(VIO_D3_MARK,		PORT105_FN1),
+	PINMUX_DATA(VIO_D4_MARK,		PORT106_FN1),
+	PINMUX_DATA(VIO_D5_MARK,		PORT107_FN1),
+	PINMUX_DATA(VIO_D6_MARK,		PORT108_FN1),
+	PINMUX_DATA(VIO_D7_MARK,		PORT109_FN1),
+	PINMUX_DATA(VIO_D8_MARK,		PORT110_FN1),
+	PINMUX_DATA(VIO_D9_MARK,		PORT111_FN1),
+	PINMUX_DATA(VIO_D10_MARK,		PORT112_FN1),
+	PINMUX_DATA(VIO_D11_MARK,		PORT113_FN1),
+	PINMUX_DATA(VIO_D12_MARK,		PORT114_FN1),
+	PINMUX_DATA(VIO_D13_MARK,		PORT115_FN1),
+	PINMUX_DATA(VIO_D14_MARK,		PORT116_FN1),
+	PINMUX_DATA(VIO_D15_MARK,		PORT117_FN1),
+	PINMUX_DATA(VIO_CLK_MARK,		PORT118_FN1),
+	PINMUX_DATA(VIO_FIELD_MARK,		PORT119_FN1),
+	PINMUX_DATA(VIO_CKO_MARK,		PORT120_FN1),
+	PINMUX_DATA(LCDD0_MARK,			PORT121_FN1),
+	PINMUX_DATA(LCDD1_MARK,			PORT122_FN1),
+	PINMUX_DATA(LCDD2_MARK,			PORT123_FN1),
+	PINMUX_DATA(LCDD3_MARK,			PORT124_FN1),
+	PINMUX_DATA(LCDD4_MARK,			PORT125_FN1),
+	PINMUX_DATA(LCDD5_MARK,			PORT126_FN1),
+	PINMUX_DATA(LCDD6_MARK,			PORT127_FN1),
+	PINMUX_DATA(LCDD7_MARK,			PORT128_FN1),
+	PINMUX_DATA(LCDD8_MARK,			PORT129_FN1),
+	PINMUX_DATA(LCDD9_MARK,			PORT130_FN1),
+	PINMUX_DATA(LCDD10_MARK,		PORT131_FN1),
+	PINMUX_DATA(LCDD11_MARK,		PORT132_FN1),
+	PINMUX_DATA(LCDD12_MARK,		PORT133_FN1),
+	PINMUX_DATA(LCDD13_MARK,		PORT134_FN1),
+	PINMUX_DATA(LCDD14_MARK,		PORT135_FN1),
+	PINMUX_DATA(LCDD15_MARK,		PORT136_FN1),
+	PINMUX_DATA(LCDD16_MARK,		PORT137_FN1),
+	PINMUX_DATA(LCDD17_MARK,		PORT138_FN1),
+	PINMUX_DATA(LCDD18_MARK,		PORT139_FN1),
+	PINMUX_DATA(LCDD19_MARK,		PORT140_FN1),
+	PINMUX_DATA(LCDD20_MARK,		PORT141_FN1),
+	PINMUX_DATA(LCDD21_MARK,		PORT142_FN1),
+	PINMUX_DATA(LCDD22_MARK,		PORT143_FN1),
+	PINMUX_DATA(LCDD23_MARK,		PORT144_FN1),
+	PINMUX_DATA(LCDHSYN_MARK,		PORT145_FN1),
+	PINMUX_DATA(LCDVSYN_MARK,		PORT146_FN1),
+	PINMUX_DATA(LCDDCK_MARK,		PORT147_FN1),
+	PINMUX_DATA(LCDRD_MARK,			PORT148_FN1),
+	PINMUX_DATA(LCDDISP_MARK,		PORT149_FN1),
+	PINMUX_DATA(LCDLCLK_MARK,		PORT150_FN1),
+	PINMUX_DATA(LCDDON_MARK,		PORT151_FN1),
+	PINMUX_DATA(SCIFA0_TXD_MARK,		PORT152_FN1),
+	PINMUX_DATA(SCIFA0_RXD_MARK,		PORT153_FN1),
+	PINMUX_DATA(SCIFA1_TXD_MARK,		PORT154_FN1),
+	PINMUX_DATA(SCIFA1_RXD_MARK,		PORT155_FN1),
+	PINMUX_DATA(TS_SPSYNC1_MARK,		PORT156_FN1),
+	PINMUX_DATA(TS_SDAT1_MARK,		PORT157_FN1),
+	PINMUX_DATA(TS_SDEN1_MARK,		PORT158_FN1),
+	PINMUX_DATA(TS_SCK1_MARK,		PORT159_FN1),
+	PINMUX_DATA(TPU0TO0_MARK,		PORT160_FN1),
+	PINMUX_DATA(TPU0TO1_MARK,		PORT161_FN1),
+	PINMUX_DATA(SCIFB_SCK_MARK,		PORT162_FN1),
+	PINMUX_DATA(SCIFB_RTS_MARK,		PORT163_FN1),
+	PINMUX_DATA(SCIFB_CTS_MARK,		PORT164_FN1),
+	PINMUX_DATA(SCIFB_TXD_MARK,		PORT165_FN1),
+	PINMUX_DATA(SCIFB_RXD_MARK,		PORT166_FN1),
+	PINMUX_DATA(VBUS0_0_MARK,		PORT167_FN1),
+	PINMUX_DATA(VBUS0_1_MARK,		PORT168_FN1),
+	PINMUX_DATA(HDMI_HPD_MARK,		PORT169_FN1),
+	PINMUX_DATA(HDMI_CEC_MARK,		PORT170_FN1),
+	PINMUX_DATA(SDHICLK0_MARK,		PORT171_FN1),
+	PINMUX_DATA(SDHICD0_MARK,		PORT172_FN1),
+	PINMUX_DATA(SDHID0_0_MARK,		PORT173_FN1),
+	PINMUX_DATA(SDHID0_1_MARK,		PORT174_FN1),
+	PINMUX_DATA(SDHID0_2_MARK,		PORT175_FN1),
+	PINMUX_DATA(SDHID0_3_MARK,		PORT176_FN1),
+	PINMUX_DATA(SDHICMD0_MARK,		PORT177_FN1),
+	PINMUX_DATA(SDHIWP0_MARK,		PORT178_FN1),
+	PINMUX_DATA(SDHICLK1_MARK,		PORT179_FN1),
+	PINMUX_DATA(SDHID1_0_MARK,		PORT180_FN1),
+	PINMUX_DATA(SDHID1_1_MARK,		PORT181_FN1),
+	PINMUX_DATA(SDHID1_2_MARK,		PORT182_FN1),
+	PINMUX_DATA(SDHID1_3_MARK,		PORT183_FN1),
+	PINMUX_DATA(SDHICMD1_MARK,		PORT184_FN1),
+	PINMUX_DATA(SDHICLK2_MARK,		PORT185_FN1),
+	PINMUX_DATA(SDHID2_0_MARK,		PORT186_FN1),
+	PINMUX_DATA(SDHID2_1_MARK,		PORT187_FN1),
+	PINMUX_DATA(SDHID2_2_MARK,		PORT188_FN1),
+	PINMUX_DATA(SDHID2_3_MARK,		PORT189_FN1),
+	PINMUX_DATA(SDHICMD2_MARK,		PORT190_FN1),
+
+	/* Function 2 */
+	PINMUX_DATA(FSIBCK_MARK,		PORT4_FN2),
+	PINMUX_DATA(SCIFA4_RXD_MARK,		PORT5_FN2),
+	PINMUX_DATA(SCIFA4_TXD_MARK,		PORT6_FN2),
+	PINMUX_DATA(SCIFA5_RXD_MARK,		PORT8_FN2),
+	PINMUX_DATA(FSIASPDIF_11_MARK,		PORT11_FN2),
+	PINMUX_DATA(SCIFA5_TXD_MARK,		PORT12_FN2),
+	PINMUX_DATA(FMSIOLR_MARK,		PORT13_FN2),
+	PINMUX_DATA(FMSIOBT_MARK,		PORT14_FN2),
+	PINMUX_DATA(FSIASPDIF_15_MARK,		PORT15_FN2),
+	PINMUX_DATA(FMSIILR_MARK,		PORT16_FN2),
+	PINMUX_DATA(FMSIIBT_MARK,		PORT17_FN2),
+	PINMUX_DATA(BS_MARK,			PORT19_FN2),
+	PINMUX_DATA(MSIOF0_TSYNC_MARK,		PORT36_FN2),
+	PINMUX_DATA(MSIOF0_TSCK_MARK,		PORT37_FN2),
+	PINMUX_DATA(MSIOF0_RXD_MARK,		PORT38_FN2),
+	PINMUX_DATA(MSIOF0_RSCK_MARK,		PORT39_FN2),
+	PINMUX_DATA(MSIOF0_RSYNC_MARK,		PORT40_FN2),
+	PINMUX_DATA(MSIOF0_MCK0_MARK,		PORT41_FN2),
+	PINMUX_DATA(MSIOF0_MCK1_MARK,		PORT42_FN2),
+	PINMUX_DATA(MSIOF0_SS1_MARK,		PORT43_FN2),
+	PINMUX_DATA(MSIOF0_SS2_MARK,		PORT44_FN2),
+	PINMUX_DATA(MSIOF0_TXD_MARK,		PORT45_FN2),
+	PINMUX_DATA(FMSICK_MARK,		PORT65_FN2),
+	PINMUX_DATA(FCE1_MARK,			PORT66_FN2),
+	PINMUX_DATA(BBIF1_RXD_MARK,		PORT76_FN2),
+	PINMUX_DATA(BBIF1_TSYNC_MARK,		PORT77_FN2),
+	PINMUX_DATA(BBIF1_TSCK_MARK,		PORT78_FN2),
+	PINMUX_DATA(BBIF1_TXD_MARK,		PORT79_FN2),
+	PINMUX_DATA(BBIF1_RSCK_MARK,		PORT80_FN2),
+	PINMUX_DATA(BBIF1_RSYNC_MARK,		PORT81_FN2),
+	PINMUX_DATA(BBIF1_FLOW_MARK,		PORT82_FN2),
+	PINMUX_DATA(BB_RX_FLOW_N_MARK,		PORT83_FN2),
+	PINMUX_DATA(MSIOF1_RSCK_MARK,		PORT84_FN2),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK,		PORT85_FN2),
+	PINMUX_DATA(MSIOF1_MCK0_MARK,		PORT86_FN2),
+	PINMUX_DATA(MSIOF1_MCK1_MARK,		PORT87_FN2),
+	PINMUX_DATA(MSIOF1_TSCK_88_MARK,	PORT88_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_TSYNC_89_MARK,	PORT89_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_TXD_90_MARK,		PORT90_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_RXD_91_MARK,		PORT91_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_SS1_92_MARK,		PORT92_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_SS2_93_MARK,		PORT93_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(SCIFA2_CTS1_MARK,		PORT94_FN2),
+	PINMUX_DATA(SCIFA2_RTS1_MARK,		PORT95_FN2),
+	PINMUX_DATA(SCIFA2_TXD1_MARK,		PORT96_FN2),
+	PINMUX_DATA(SCIFA2_RXD1_MARK,		PORT97_FN2),
+	PINMUX_DATA(SCIFA2_SCK1_MARK,		PORT98_FN2),
+	PINMUX_DATA(I2C_SCL2_MARK,		PORT110_FN2),
+	PINMUX_DATA(I2C_SDA2_MARK,		PORT111_FN2),
+	PINMUX_DATA(I2C_SCL3_MARK,		PORT114_FN2, MSEL4CR_16_1),
+	PINMUX_DATA(I2C_SDA3_MARK,		PORT115_FN2, MSEL4CR_16_1),
+	PINMUX_DATA(I2C_SCL4_MARK,		PORT116_FN2, MSEL4CR_17_1),
+	PINMUX_DATA(I2C_SDA4_MARK,		PORT117_FN2, MSEL4CR_17_1),
+	PINMUX_DATA(MSIOF2_RSCK_MARK,		PORT134_FN2),
+	PINMUX_DATA(MSIOF2_RSYNC_MARK,		PORT135_FN2),
+	PINMUX_DATA(MSIOF2_MCK0_MARK,		PORT136_FN2),
+	PINMUX_DATA(MSIOF2_MCK1_MARK,		PORT137_FN2),
+	PINMUX_DATA(MSIOF2_SS1_MARK,		PORT138_FN2),
+	PINMUX_DATA(MSIOF2_SS2_MARK,		PORT139_FN2),
+	PINMUX_DATA(SCIFA3_CTS_140_MARK,	PORT140_FN2, MSEL3CR_9_1),
+	PINMUX_DATA(SCIFA3_RTS_141_MARK,	PORT141_FN2),
+	PINMUX_DATA(SCIFA3_SCK_MARK,		PORT142_FN2),
+	PINMUX_DATA(SCIFA3_TXD_MARK,		PORT143_FN2),
+	PINMUX_DATA(SCIFA3_RXD_MARK,		PORT144_FN2),
+	PINMUX_DATA(MSIOF2_TSYNC_MARK,		PORT148_FN2),
+	PINMUX_DATA(MSIOF2_TSCK_MARK,		PORT149_FN2),
+	PINMUX_DATA(MSIOF2_RXD_MARK,		PORT150_FN2),
+	PINMUX_DATA(MSIOF2_TXD_MARK,		PORT151_FN2),
+	PINMUX_DATA(SCIFA0_SCK_MARK,		PORT156_FN2),
+	PINMUX_DATA(SCIFA0_RTS_MARK,		PORT157_FN2),
+	PINMUX_DATA(SCIFA0_CTS_MARK,		PORT158_FN2),
+	PINMUX_DATA(SCIFA1_SCK_MARK,		PORT159_FN2),
+	PINMUX_DATA(SCIFA1_RTS_MARK,		PORT160_FN2),
+	PINMUX_DATA(SCIFA1_CTS_MARK,		PORT161_FN2),
+
+	/* Function 3 */
+	PINMUX_DATA(VIO_CKO1_MARK,		PORT16_FN3),
+	PINMUX_DATA(VIO_CKO2_MARK,		PORT17_FN3),
+	PINMUX_DATA(IDIN_1_18_MARK,		PORT18_FN3, MSEL4CR_14_1),
+	PINMUX_DATA(MSIOF1_TSCK_39_MARK,	PORT39_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_TSYNC_40_MARK,	PORT40_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_TXD_41_MARK,		PORT41_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_RXD_42_MARK,		PORT42_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_SS1_43_MARK,		PORT43_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_SS2_44_MARK,		PORT44_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MMCD1_0_MARK,		PORT54_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_1_MARK,		PORT55_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_2_MARK,		PORT56_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_3_MARK,		PORT57_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_4_MARK,		PORT58_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_5_MARK,		PORT59_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_6_MARK,		PORT60_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_7_MARK,		PORT61_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(VINT_I_MARK,		PORT65_FN3),
+	PINMUX_DATA(MMCCLK1_MARK,		PORT66_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCCMD1_MARK,		PORT67_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(TPU0TO2_93_MARK,		PORT93_FN3),
+	PINMUX_DATA(TPU0TO2_99_MARK,		PORT99_FN3),
+	PINMUX_DATA(TPU0TO3_MARK,		PORT112_FN3),
+	PINMUX_DATA(IDIN_0_MARK,		PORT113_FN3),
+	PINMUX_DATA(EXTLP_0_MARK,		PORT114_FN3),
+	PINMUX_DATA(OVCN2_0_MARK,		PORT115_FN3),
+	PINMUX_DATA(PWEN_0_MARK,		PORT116_FN3),
+	PINMUX_DATA(OVCN_0_MARK,		PORT117_FN3),
+	PINMUX_DATA(KEYOUT7_MARK,		PORT121_FN3),
+	PINMUX_DATA(KEYOUT6_MARK,		PORT122_FN3),
+	PINMUX_DATA(KEYOUT5_MARK,		PORT123_FN3),
+	PINMUX_DATA(KEYOUT4_MARK,		PORT124_FN3),
+	PINMUX_DATA(KEYOUT3_MARK,		PORT125_FN3),
+	PINMUX_DATA(KEYOUT2_MARK,		PORT126_FN3),
+	PINMUX_DATA(KEYOUT1_MARK,		PORT127_FN3),
+	PINMUX_DATA(KEYOUT0_MARK,		PORT128_FN3),
+	PINMUX_DATA(KEYIN7_MARK,		PORT129_FN3),
+	PINMUX_DATA(KEYIN6_MARK,		PORT130_FN3),
+	PINMUX_DATA(KEYIN5_MARK,		PORT131_FN3),
+	PINMUX_DATA(KEYIN4_MARK,		PORT132_FN3),
+	PINMUX_DATA(KEYIN3_133_MARK,		PORT133_FN3, MSEL4CR_18_0),
+	PINMUX_DATA(KEYIN2_134_MARK,		PORT134_FN3, MSEL4CR_18_0),
+	PINMUX_DATA(KEYIN1_135_MARK,		PORT135_FN3, MSEL4CR_18_0),
+	PINMUX_DATA(KEYIN0_136_MARK,		PORT136_FN3, MSEL4CR_18_0),
+	PINMUX_DATA(TS_SPSYNC2_MARK,		PORT137_FN3),
+	PINMUX_DATA(IROUT_139_MARK,		PORT139_FN3),
+	PINMUX_DATA(IRDA_OUT_MARK,		PORT140_FN3),
+	PINMUX_DATA(IRDA_IN_MARK,		PORT141_FN3),
+	PINMUX_DATA(IRDA_FIRSEL_MARK,		PORT142_FN3),
+	PINMUX_DATA(TS_SDAT2_MARK,		PORT145_FN3),
+	PINMUX_DATA(TS_SDEN2_MARK,		PORT146_FN3),
+	PINMUX_DATA(TS_SCK2_MARK,		PORT147_FN3),
+
+	/* Function 4 */
+	PINMUX_DATA(SCIFA3_CTS_43_MARK,	PORT43_FN4, MSEL3CR_9_0),
+	PINMUX_DATA(SCIFA3_RTS_44_MARK,	PORT44_FN4),
+	PINMUX_DATA(GP_RX_FLAG_MARK,	PORT76_FN4),
+	PINMUX_DATA(GP_RX_DATA_MARK,	PORT77_FN4),
+	PINMUX_DATA(GP_TX_READY_MARK,	PORT78_FN4),
+	PINMUX_DATA(GP_RX_WAKE_MARK,	PORT79_FN4),
+	PINMUX_DATA(MP_TX_FLAG_MARK,	PORT80_FN4),
+	PINMUX_DATA(MP_TX_DATA_MARK,	PORT81_FN4),
+	PINMUX_DATA(MP_RX_READY_MARK,	PORT82_FN4),
+	PINMUX_DATA(MP_TX_WAKE_MARK,	PORT83_FN4),
+	PINMUX_DATA(MMCD0_0_MARK,	PORT84_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_1_MARK,	PORT85_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_2_MARK,	PORT86_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_3_MARK,	PORT87_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_4_MARK,	PORT88_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_5_MARK,	PORT89_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_6_MARK,	PORT90_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_7_MARK,	PORT91_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCCMD0_MARK,	PORT92_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(SIM_RST_MARK,	PORT94_FN4),
+	PINMUX_DATA(SIM_CLK_MARK,	PORT95_FN4),
+	PINMUX_DATA(SIM_D_MARK,		PORT98_FN4),
+	PINMUX_DATA(MMCCLK0_MARK,	PORT99_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(IDIN_1_113_MARK,	PORT113_FN4, MSEL4CR_14_0),
+	PINMUX_DATA(OVCN_1_114_MARK,	PORT114_FN4, MSEL4CR_14_0),
+	PINMUX_DATA(PWEN_1_115_MARK,	PORT115_FN4),
+	PINMUX_DATA(EXTLP_1_MARK,	PORT116_FN4),
+	PINMUX_DATA(OVCN2_1_MARK,	PORT117_FN4),
+	PINMUX_DATA(KEYIN0_121_MARK,	PORT121_FN4, MSEL4CR_18_1),
+	PINMUX_DATA(KEYIN1_122_MARK,	PORT122_FN4, MSEL4CR_18_1),
+	PINMUX_DATA(KEYIN2_123_MARK,	PORT123_FN4, MSEL4CR_18_1),
+	PINMUX_DATA(KEYIN3_124_MARK,	PORT124_FN4, MSEL4CR_18_1),
+	PINMUX_DATA(PWEN_1_138_MARK,	PORT138_FN4),
+	PINMUX_DATA(IROUT_140_MARK,	PORT140_FN4),
+	PINMUX_DATA(LCDCS_MARK,		PORT145_FN4),
+	PINMUX_DATA(LCDWR_MARK,		PORT147_FN4),
+	PINMUX_DATA(LCDRS_MARK,		PORT149_FN4),
+	PINMUX_DATA(OVCN_1_162_MARK,	PORT162_FN4, MSEL4CR_14_1),
+
+	/* Function 5 */
+	PINMUX_DATA(GPI0_MARK,		PORT41_FN5),
+	PINMUX_DATA(GPI1_MARK,		PORT42_FN5),
+	PINMUX_DATA(GPO0_MARK,		PORT43_FN5),
+	PINMUX_DATA(GPO1_MARK,		PORT44_FN5),
+	PINMUX_DATA(I2C_SCL3S_MARK,	PORT137_FN5, MSEL4CR_16_0),
+	PINMUX_DATA(I2C_SDA3S_MARK,	PORT145_FN5, MSEL4CR_16_0),
+	PINMUX_DATA(I2C_SCL4S_MARK,	PORT146_FN5, MSEL4CR_17_0),
+	PINMUX_DATA(I2C_SDA4S_MARK,	PORT147_FN5, MSEL4CR_17_0),
+
+	/* Function select */
+	PINMUX_DATA(LCDC0_SELECT_MARK,	MSEL3CR_6_0),
+	PINMUX_DATA(LCDC1_SELECT_MARK,	MSEL3CR_6_1),
+
+	PINMUX_DATA(TS0_1SELECT_MARK,	MSEL3CR_21_0, MSEL3CR_20_0),
+	PINMUX_DATA(TS0_2SELECT_MARK,	MSEL3CR_21_0, MSEL3CR_20_1),
+	PINMUX_DATA(TS1_1SELECT_MARK,	MSEL3CR_27_0, MSEL3CR_26_0),
+	PINMUX_DATA(TS1_2SELECT_MARK,	MSEL3CR_27_0, MSEL3CR_26_1),
+
+	PINMUX_DATA(SDENC_CPG_MARK,	MSEL4CR_19_0),
+	PINMUX_DATA(SDENC_DV_CLKI_MARK,	MSEL4CR_19_1),
+
+	PINMUX_DATA(MFIv6_MARK,		MSEL4CR_6_0),
+	PINMUX_DATA(MFIv4_MARK,		MSEL4CR_6_1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+
+	/* PORT */
+	GPIO_PORT_ALL(),
+
+	/* IRQ */
+	GPIO_FN(IRQ0_6),	GPIO_FN(IRQ0_162),	GPIO_FN(IRQ1),
+	GPIO_FN(IRQ2_4),	GPIO_FN(IRQ2_5),	GPIO_FN(IRQ3_8),
+	GPIO_FN(IRQ3_16),	GPIO_FN(IRQ4_17),	GPIO_FN(IRQ4_163),
+	GPIO_FN(IRQ5),		GPIO_FN(IRQ6_39),	GPIO_FN(IRQ6_164),
+	GPIO_FN(IRQ7_40),	GPIO_FN(IRQ7_167),	GPIO_FN(IRQ8_41),
+	GPIO_FN(IRQ8_168),	GPIO_FN(IRQ9_42),	GPIO_FN(IRQ9_169),
+	GPIO_FN(IRQ10),		GPIO_FN(IRQ11),		GPIO_FN(IRQ12_80),
+	GPIO_FN(IRQ12_137),	GPIO_FN(IRQ13_81),	GPIO_FN(IRQ13_145),
+	GPIO_FN(IRQ14_82),	GPIO_FN(IRQ14_146),	GPIO_FN(IRQ15_83),
+	GPIO_FN(IRQ15_147),	GPIO_FN(IRQ16_84),	GPIO_FN(IRQ16_170),
+	GPIO_FN(IRQ17),		GPIO_FN(IRQ18),		GPIO_FN(IRQ19),
+	GPIO_FN(IRQ20),		GPIO_FN(IRQ21),		GPIO_FN(IRQ22),
+	GPIO_FN(IRQ23),		GPIO_FN(IRQ24),		GPIO_FN(IRQ25),
+	GPIO_FN(IRQ26_121),	GPIO_FN(IRQ26_172),	GPIO_FN(IRQ27_122),
+	GPIO_FN(IRQ27_180),	GPIO_FN(IRQ28_123),	GPIO_FN(IRQ28_181),
+	GPIO_FN(IRQ29_129),	GPIO_FN(IRQ29_182),	GPIO_FN(IRQ30_130),
+	GPIO_FN(IRQ30_183),	GPIO_FN(IRQ31_138),	GPIO_FN(IRQ31_184),
+
+	/* MSIOF0 */
+	GPIO_FN(MSIOF0_TSYNC),	GPIO_FN(MSIOF0_TSCK),	GPIO_FN(MSIOF0_RXD),
+	GPIO_FN(MSIOF0_RSCK),	GPIO_FN(MSIOF0_RSYNC),	GPIO_FN(MSIOF0_MCK0),
+	GPIO_FN(MSIOF0_MCK1),	GPIO_FN(MSIOF0_SS1),	GPIO_FN(MSIOF0_SS2),
+	GPIO_FN(MSIOF0_TXD),
+
+	/* MSIOF1 */
+	GPIO_FN(MSIOF1_TSCK_39),	GPIO_FN(MSIOF1_TSCK_88),
+	GPIO_FN(MSIOF1_TSYNC_40),	GPIO_FN(MSIOF1_TSYNC_89),
+	GPIO_FN(MSIOF1_TXD_41),		GPIO_FN(MSIOF1_TXD_90),
+	GPIO_FN(MSIOF1_RXD_42),		GPIO_FN(MSIOF1_RXD_91),
+	GPIO_FN(MSIOF1_SS1_43),		GPIO_FN(MSIOF1_SS1_92),
+	GPIO_FN(MSIOF1_SS2_44),		GPIO_FN(MSIOF1_SS2_93),
+	GPIO_FN(MSIOF1_RSCK),		GPIO_FN(MSIOF1_RSYNC),
+	GPIO_FN(MSIOF1_MCK0),		GPIO_FN(MSIOF1_MCK1),
+
+	/* MSIOF2 */
+	GPIO_FN(MSIOF2_RSCK),	GPIO_FN(MSIOF2_RSYNC),	GPIO_FN(MSIOF2_MCK0),
+	GPIO_FN(MSIOF2_MCK1),	GPIO_FN(MSIOF2_SS1),	GPIO_FN(MSIOF2_SS2),
+	GPIO_FN(MSIOF2_TSYNC),	GPIO_FN(MSIOF2_TSCK),	GPIO_FN(MSIOF2_RXD),
+	GPIO_FN(MSIOF2_TXD),
+
+	/* MSIOF3 */
+	GPIO_FN(BBIF1_RXD),	GPIO_FN(BBIF1_TSYNC),	GPIO_FN(BBIF1_TSCK),
+	GPIO_FN(BBIF1_TXD),	GPIO_FN(BBIF1_RSCK),	GPIO_FN(BBIF1_RSYNC),
+	GPIO_FN(BBIF1_FLOW),	GPIO_FN(BB_RX_FLOW_N),
+
+	/* MSIOF4 */
+	GPIO_FN(BBIF2_TSCK1),	GPIO_FN(BBIF2_TSYNC1),
+	GPIO_FN(BBIF2_TXD1),	GPIO_FN(BBIF2_RXD),
+
+	/* FSI */
+	GPIO_FN(FSIACK),	GPIO_FN(FSIBCK),	GPIO_FN(FSIAILR),
+	GPIO_FN(FSIAIBT),	GPIO_FN(FSIAISLD),	GPIO_FN(FSIAOMC),
+	GPIO_FN(FSIAOLR),	GPIO_FN(FSIAOBT),	GPIO_FN(FSIAOSLD),
+	GPIO_FN(FSIASPDIF_11),	GPIO_FN(FSIASPDIF_15),
+
+	/* FMSI */
+	GPIO_FN(FMSOCK),	GPIO_FN(FMSOOLR),	GPIO_FN(FMSIOLR),
+	GPIO_FN(FMSOOBT),	GPIO_FN(FMSIOBT),	GPIO_FN(FMSOSLD),
+	GPIO_FN(FMSOILR),	GPIO_FN(FMSIILR),	GPIO_FN(FMSOIBT),
+	GPIO_FN(FMSIIBT),	GPIO_FN(FMSISLD),	GPIO_FN(FMSICK),
+
+	/* SCIFA0 */
+	GPIO_FN(SCIFA0_TXD),	GPIO_FN(SCIFA0_RXD),	GPIO_FN(SCIFA0_SCK),
+	GPIO_FN(SCIFA0_RTS),	GPIO_FN(SCIFA0_CTS),
+
+	/* SCIFA1 */
+	GPIO_FN(SCIFA1_TXD),	GPIO_FN(SCIFA1_RXD),	GPIO_FN(SCIFA1_SCK),
+	GPIO_FN(SCIFA1_RTS),	GPIO_FN(SCIFA1_CTS),
+
+	/* SCIFA2 */
+	GPIO_FN(SCIFA2_CTS1),	GPIO_FN(SCIFA2_RTS1),	GPIO_FN(SCIFA2_TXD1),
+	GPIO_FN(SCIFA2_RXD1),	GPIO_FN(SCIFA2_SCK1),
+
+	/* SCIFA3 */
+	GPIO_FN(SCIFA3_CTS_43),		GPIO_FN(SCIFA3_CTS_140),
+	GPIO_FN(SCIFA3_RTS_44),		GPIO_FN(SCIFA3_RTS_141),
+	GPIO_FN(SCIFA3_SCK),		GPIO_FN(SCIFA3_TXD),
+	GPIO_FN(SCIFA3_RXD),
+
+	/* SCIFA4 */
+	GPIO_FN(SCIFA4_RXD),	GPIO_FN(SCIFA4_TXD),
+
+	/* SCIFA5 */
+	GPIO_FN(SCIFA5_RXD),	GPIO_FN(SCIFA5_TXD),
+
+	/* SCIFB */
+	GPIO_FN(SCIFB_SCK),	GPIO_FN(SCIFB_RTS),	GPIO_FN(SCIFB_CTS),
+	GPIO_FN(SCIFB_TXD),	GPIO_FN(SCIFB_RXD),
+
+	/* CEU */
+	GPIO_FN(VIO_HD),	GPIO_FN(VIO_CKO1),	GPIO_FN(VIO_CKO2),
+	GPIO_FN(VIO_VD),	GPIO_FN(VIO_CLK),	GPIO_FN(VIO_FIELD),
+	GPIO_FN(VIO_CKO),	GPIO_FN(VIO_D0),	GPIO_FN(VIO_D1),
+	GPIO_FN(VIO_D2),	GPIO_FN(VIO_D3),	GPIO_FN(VIO_D4),
+	GPIO_FN(VIO_D5),	GPIO_FN(VIO_D6),	GPIO_FN(VIO_D7),
+	GPIO_FN(VIO_D8),	GPIO_FN(VIO_D9),	GPIO_FN(VIO_D10),
+	GPIO_FN(VIO_D11),	GPIO_FN(VIO_D12),	GPIO_FN(VIO_D13),
+	GPIO_FN(VIO_D14),	GPIO_FN(VIO_D15),
+
+	/* USB0 */
+	GPIO_FN(IDIN_0),	GPIO_FN(EXTLP_0),	GPIO_FN(OVCN2_0),
+	GPIO_FN(PWEN_0),	GPIO_FN(OVCN_0),	GPIO_FN(VBUS0_0),
+
+	/* USB1 */
+	GPIO_FN(IDIN_1_18),	GPIO_FN(IDIN_1_113),
+	GPIO_FN(OVCN_1_114),	GPIO_FN(OVCN_1_162),
+	GPIO_FN(PWEN_1_115),	GPIO_FN(PWEN_1_138),
+	GPIO_FN(EXTLP_1),	GPIO_FN(OVCN2_1),
+	GPIO_FN(VBUS0_1),
+
+	/* GPIO */
+	GPIO_FN(GPI0),	GPIO_FN(GPI1),	GPIO_FN(GPO0),	GPIO_FN(GPO1),
+
+	/* BSC */
+	GPIO_FN(BS),	GPIO_FN(WE1),	GPIO_FN(CKO),
+	GPIO_FN(WAIT),	GPIO_FN(RDWR),
+
+	GPIO_FN(A0),	GPIO_FN(A1),	GPIO_FN(A2),
+	GPIO_FN(A3),	GPIO_FN(A6),	GPIO_FN(A7),
+	GPIO_FN(A8),	GPIO_FN(A9),	GPIO_FN(A10),
+	GPIO_FN(A11),	GPIO_FN(A12),	GPIO_FN(A13),
+	GPIO_FN(A14),	GPIO_FN(A15),	GPIO_FN(A16),
+	GPIO_FN(A17),	GPIO_FN(A18),	GPIO_FN(A19),
+	GPIO_FN(A20),	GPIO_FN(A21),	GPIO_FN(A22),
+	GPIO_FN(A23),	GPIO_FN(A24),	GPIO_FN(A25),
+	GPIO_FN(A26),
+
+	GPIO_FN(CS0),	GPIO_FN(CS2),	GPIO_FN(CS4),
+	GPIO_FN(CS5A),	GPIO_FN(CS5B),	GPIO_FN(CS6A),
+
+	/* BSC/FLCTL */
+	GPIO_FN(RD_FSC),	GPIO_FN(WE0_FWE),	GPIO_FN(A4_FOE),
+	GPIO_FN(A5_FCDE),	GPIO_FN(D0_NAF0),	GPIO_FN(D1_NAF1),
+	GPIO_FN(D2_NAF2),	GPIO_FN(D3_NAF3),	GPIO_FN(D4_NAF4),
+	GPIO_FN(D5_NAF5),	GPIO_FN(D6_NAF6),	GPIO_FN(D7_NAF7),
+	GPIO_FN(D8_NAF8),	GPIO_FN(D9_NAF9),	GPIO_FN(D10_NAF10),
+	GPIO_FN(D11_NAF11),	GPIO_FN(D12_NAF12),	GPIO_FN(D13_NAF13),
+	GPIO_FN(D14_NAF14),	GPIO_FN(D15_NAF15),
+
+	/* MMCIF(1) */
+	GPIO_FN(MMCD0_0),	GPIO_FN(MMCD0_1),	GPIO_FN(MMCD0_2),
+	GPIO_FN(MMCD0_3),	GPIO_FN(MMCD0_4),	GPIO_FN(MMCD0_5),
+	GPIO_FN(MMCD0_6),	GPIO_FN(MMCD0_7),	GPIO_FN(MMCCMD0),
+	GPIO_FN(MMCCLK0),
+
+	/* MMCIF(2) */
+	GPIO_FN(MMCD1_0),	GPIO_FN(MMCD1_1),	GPIO_FN(MMCD1_2),
+	GPIO_FN(MMCD1_3),	GPIO_FN(MMCD1_4),	GPIO_FN(MMCD1_5),
+	GPIO_FN(MMCD1_6),	GPIO_FN(MMCD1_7),	GPIO_FN(MMCCLK1),
+	GPIO_FN(MMCCMD1),
+
+	/* SPU2 */
+	GPIO_FN(VINT_I),
+
+	/* FLCTL */
+	GPIO_FN(FCE1),	GPIO_FN(FCE0),	GPIO_FN(FRB),
+
+	/* HSI */
+	GPIO_FN(GP_RX_FLAG),	GPIO_FN(GP_RX_DATA),	GPIO_FN(GP_TX_READY),
+	GPIO_FN(GP_RX_WAKE),	GPIO_FN(MP_TX_FLAG),	GPIO_FN(MP_TX_DATA),
+	GPIO_FN(MP_RX_READY),	GPIO_FN(MP_TX_WAKE),
+
+	/* MFI */
+	GPIO_FN(MFIv6),
+	GPIO_FN(MFIv4),
+
+	GPIO_FN(MEMC_BUSCLK_MEMC_A0),	GPIO_FN(MEMC_ADV_MEMC_DREQ0),
+	GPIO_FN(MEMC_WAIT_MEMC_DREQ1),	GPIO_FN(MEMC_CS1_MEMC_A1),
+	GPIO_FN(MEMC_CS0),	GPIO_FN(MEMC_NOE),
+	GPIO_FN(MEMC_NWE),	GPIO_FN(MEMC_INT),
+
+	GPIO_FN(MEMC_AD0),	GPIO_FN(MEMC_AD1),	GPIO_FN(MEMC_AD2),
+	GPIO_FN(MEMC_AD3),	GPIO_FN(MEMC_AD4),	GPIO_FN(MEMC_AD5),
+	GPIO_FN(MEMC_AD6),	GPIO_FN(MEMC_AD7),	GPIO_FN(MEMC_AD8),
+	GPIO_FN(MEMC_AD9),	GPIO_FN(MEMC_AD10),	GPIO_FN(MEMC_AD11),
+	GPIO_FN(MEMC_AD12),	GPIO_FN(MEMC_AD13),	GPIO_FN(MEMC_AD14),
+	GPIO_FN(MEMC_AD15),
+
+	/* SIM */
+	GPIO_FN(SIM_RST),	GPIO_FN(SIM_CLK),	GPIO_FN(SIM_D),
+
+	/* TPU */
+	GPIO_FN(TPU0TO0),	GPIO_FN(TPU0TO1),	GPIO_FN(TPU0TO2_93),
+	GPIO_FN(TPU0TO2_99),	GPIO_FN(TPU0TO3),
+
+	/* I2C2 */
+	GPIO_FN(I2C_SCL2),	GPIO_FN(I2C_SDA2),
+
+	/* I2C3(1) */
+	GPIO_FN(I2C_SCL3),	GPIO_FN(I2C_SDA3),
+
+	/* I2C3(2) */
+	GPIO_FN(I2C_SCL3S),	GPIO_FN(I2C_SDA3S),
+
+	/* I2C4(2) */
+	GPIO_FN(I2C_SCL4),	GPIO_FN(I2C_SDA4),
+
+	/* I2C4(2) */
+	GPIO_FN(I2C_SCL4S),	GPIO_FN(I2C_SDA4S),
+
+	/* KEYSC */
+	GPIO_FN(KEYOUT0),	GPIO_FN(KEYIN0_121),	GPIO_FN(KEYIN0_136),
+	GPIO_FN(KEYOUT1),	GPIO_FN(KEYIN1_122),	GPIO_FN(KEYIN1_135),
+	GPIO_FN(KEYOUT2),	GPIO_FN(KEYIN2_123),	GPIO_FN(KEYIN2_134),
+	GPIO_FN(KEYOUT3),	GPIO_FN(KEYIN3_124),	GPIO_FN(KEYIN3_133),
+	GPIO_FN(KEYOUT4),	GPIO_FN(KEYIN4),	GPIO_FN(KEYOUT5),
+	GPIO_FN(KEYIN5),	GPIO_FN(KEYOUT6),	GPIO_FN(KEYIN6),
+	GPIO_FN(KEYOUT7),	GPIO_FN(KEYIN7),
+
+	/* LCDC */
+	GPIO_FN(LCDHSYN),	GPIO_FN(LCDCS),	GPIO_FN(LCDVSYN),
+	GPIO_FN(LCDDCK),	GPIO_FN(LCDWR),	GPIO_FN(LCDRD),
+	GPIO_FN(LCDDISP),	GPIO_FN(LCDRS),	GPIO_FN(LCDLCLK),
+	GPIO_FN(LCDDON),
+
+	GPIO_FN(LCDD0),		GPIO_FN(LCDD1),		GPIO_FN(LCDD2),
+	GPIO_FN(LCDD3),		GPIO_FN(LCDD4),		GPIO_FN(LCDD5),
+	GPIO_FN(LCDD6),		GPIO_FN(LCDD7),		GPIO_FN(LCDD8),
+	GPIO_FN(LCDD9),		GPIO_FN(LCDD10),	GPIO_FN(LCDD11),
+	GPIO_FN(LCDD12),	GPIO_FN(LCDD13),	GPIO_FN(LCDD14),
+	GPIO_FN(LCDD15),	GPIO_FN(LCDD16),	GPIO_FN(LCDD17),
+	GPIO_FN(LCDD18),	GPIO_FN(LCDD19),	GPIO_FN(LCDD20),
+	GPIO_FN(LCDD21),	GPIO_FN(LCDD22),	GPIO_FN(LCDD23),
+
+	/* IRDA */
+	GPIO_FN(IRDA_OUT),	GPIO_FN(IRDA_IN),	GPIO_FN(IRDA_FIRSEL),
+	GPIO_FN(IROUT_139),	GPIO_FN(IROUT_140),
+
+	/* TSIF1 */
+	GPIO_FN(TS0_1SELECT),
+	GPIO_FN(TS0_2SELECT),
+	GPIO_FN(TS1_1SELECT),
+	GPIO_FN(TS1_2SELECT),
+
+	GPIO_FN(TS_SPSYNC1),	GPIO_FN(TS_SDAT1),
+	GPIO_FN(TS_SDEN1),	GPIO_FN(TS_SCK1),
+
+	/* TSIF2 */
+	GPIO_FN(TS_SPSYNC2),	GPIO_FN(TS_SDAT2),
+	GPIO_FN(TS_SDEN2),	GPIO_FN(TS_SCK2),
+
+	/* HDMI */
+	GPIO_FN(HDMI_HPD),	GPIO_FN(HDMI_CEC),
+
+	/* SDHI0 */
+	GPIO_FN(SDHICLK0),	GPIO_FN(SDHICD0),	GPIO_FN(SDHICMD0),
+	GPIO_FN(SDHIWP0),	GPIO_FN(SDHID0_0),	GPIO_FN(SDHID0_1),
+	GPIO_FN(SDHID0_2),	GPIO_FN(SDHID0_3),
+
+	/* SDHI1 */
+	GPIO_FN(SDHICLK1),	GPIO_FN(SDHICMD1),	GPIO_FN(SDHID1_0),
+	GPIO_FN(SDHID1_1),	GPIO_FN(SDHID1_2),	GPIO_FN(SDHID1_3),
+
+	/* SDHI2 */
+	GPIO_FN(SDHICLK2),	GPIO_FN(SDHICMD2),	GPIO_FN(SDHID2_0),
+	GPIO_FN(SDHID2_1),	GPIO_FN(SDHID2_2),	GPIO_FN(SDHID2_3),
+
+	/* SDENC */
+	GPIO_FN(SDENC_CPG),
+	GPIO_FN(SDENC_DV_CLKI),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out)		\
+	0, (out), (in), 0,			\
+	0, 0, 0, 0,				\
+	0, 0, (in_pd), 0,			\
+	0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)						\
+	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
+		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
+		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
+		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
+		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
+		PORT##nr##_FN6, PORT##nr##_FN7 }		\
+	}
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	PORTCR(0,	0xE6051000), /* PORT0CR */
+	PORTCR(1,	0xE6051001), /* PORT1CR */
+	PORTCR(2,	0xE6051002), /* PORT2CR */
+	PORTCR(3,	0xE6051003), /* PORT3CR */
+	PORTCR(4,	0xE6051004), /* PORT4CR */
+	PORTCR(5,	0xE6051005), /* PORT5CR */
+	PORTCR(6,	0xE6051006), /* PORT6CR */
+	PORTCR(7,	0xE6051007), /* PORT7CR */
+	PORTCR(8,	0xE6051008), /* PORT8CR */
+	PORTCR(9,	0xE6051009), /* PORT9CR */
+	PORTCR(10,	0xE605100A), /* PORT10CR */
+	PORTCR(11,	0xE605100B), /* PORT11CR */
+	PORTCR(12,	0xE605100C), /* PORT12CR */
+	PORTCR(13,	0xE605100D), /* PORT13CR */
+	PORTCR(14,	0xE605100E), /* PORT14CR */
+	PORTCR(15,	0xE605100F), /* PORT15CR */
+	PORTCR(16,	0xE6051010), /* PORT16CR */
+	PORTCR(17,	0xE6051011), /* PORT17CR */
+	PORTCR(18,	0xE6051012), /* PORT18CR */
+	PORTCR(19,	0xE6051013), /* PORT19CR */
+	PORTCR(20,	0xE6051014), /* PORT20CR */
+	PORTCR(21,	0xE6051015), /* PORT21CR */
+	PORTCR(22,	0xE6051016), /* PORT22CR */
+	PORTCR(23,	0xE6051017), /* PORT23CR */
+	PORTCR(24,	0xE6051018), /* PORT24CR */
+	PORTCR(25,	0xE6051019), /* PORT25CR */
+	PORTCR(26,	0xE605101A), /* PORT26CR */
+	PORTCR(27,	0xE605101B), /* PORT27CR */
+	PORTCR(28,	0xE605101C), /* PORT28CR */
+	PORTCR(29,	0xE605101D), /* PORT29CR */
+	PORTCR(30,	0xE605101E), /* PORT30CR */
+	PORTCR(31,	0xE605101F), /* PORT31CR */
+	PORTCR(32,	0xE6051020), /* PORT32CR */
+	PORTCR(33,	0xE6051021), /* PORT33CR */
+	PORTCR(34,	0xE6051022), /* PORT34CR */
+	PORTCR(35,	0xE6051023), /* PORT35CR */
+	PORTCR(36,	0xE6051024), /* PORT36CR */
+	PORTCR(37,	0xE6051025), /* PORT37CR */
+	PORTCR(38,	0xE6051026), /* PORT38CR */
+	PORTCR(39,	0xE6051027), /* PORT39CR */
+	PORTCR(40,	0xE6051028), /* PORT40CR */
+	PORTCR(41,	0xE6051029), /* PORT41CR */
+	PORTCR(42,	0xE605102A), /* PORT42CR */
+	PORTCR(43,	0xE605102B), /* PORT43CR */
+	PORTCR(44,	0xE605102C), /* PORT44CR */
+	PORTCR(45,	0xE605102D), /* PORT45CR */
+	PORTCR(46,	0xE605202E), /* PORT46CR */
+	PORTCR(47,	0xE605202F), /* PORT47CR */
+	PORTCR(48,	0xE6052030), /* PORT48CR */
+	PORTCR(49,	0xE6052031), /* PORT49CR */
+	PORTCR(50,	0xE6052032), /* PORT50CR */
+	PORTCR(51,	0xE6052033), /* PORT51CR */
+	PORTCR(52,	0xE6052034), /* PORT52CR */
+	PORTCR(53,	0xE6052035), /* PORT53CR */
+	PORTCR(54,	0xE6052036), /* PORT54CR */
+	PORTCR(55,	0xE6052037), /* PORT55CR */
+	PORTCR(56,	0xE6052038), /* PORT56CR */
+	PORTCR(57,	0xE6052039), /* PORT57CR */
+	PORTCR(58,	0xE605203A), /* PORT58CR */
+	PORTCR(59,	0xE605203B), /* PORT59CR */
+	PORTCR(60,	0xE605203C), /* PORT60CR */
+	PORTCR(61,	0xE605203D), /* PORT61CR */
+	PORTCR(62,	0xE605203E), /* PORT62CR */
+	PORTCR(63,	0xE605203F), /* PORT63CR */
+	PORTCR(64,	0xE6052040), /* PORT64CR */
+	PORTCR(65,	0xE6052041), /* PORT65CR */
+	PORTCR(66,	0xE6052042), /* PORT66CR */
+	PORTCR(67,	0xE6052043), /* PORT67CR */
+	PORTCR(68,	0xE6052044), /* PORT68CR */
+	PORTCR(69,	0xE6052045), /* PORT69CR */
+	PORTCR(70,	0xE6052046), /* PORT70CR */
+	PORTCR(71,	0xE6052047), /* PORT71CR */
+	PORTCR(72,	0xE6052048), /* PORT72CR */
+	PORTCR(73,	0xE6052049), /* PORT73CR */
+	PORTCR(74,	0xE605204A), /* PORT74CR */
+	PORTCR(75,	0xE605204B), /* PORT75CR */
+	PORTCR(76,	0xE605004C), /* PORT76CR */
+	PORTCR(77,	0xE605004D), /* PORT77CR */
+	PORTCR(78,	0xE605004E), /* PORT78CR */
+	PORTCR(79,	0xE605004F), /* PORT79CR */
+	PORTCR(80,	0xE6050050), /* PORT80CR */
+	PORTCR(81,	0xE6050051), /* PORT81CR */
+	PORTCR(82,	0xE6050052), /* PORT82CR */
+	PORTCR(83,	0xE6050053), /* PORT83CR */
+	PORTCR(84,	0xE6050054), /* PORT84CR */
+	PORTCR(85,	0xE6050055), /* PORT85CR */
+	PORTCR(86,	0xE6050056), /* PORT86CR */
+	PORTCR(87,	0xE6050057), /* PORT87CR */
+	PORTCR(88,	0xE6050058), /* PORT88CR */
+	PORTCR(89,	0xE6050059), /* PORT89CR */
+	PORTCR(90,	0xE605005A), /* PORT90CR */
+	PORTCR(91,	0xE605005B), /* PORT91CR */
+	PORTCR(92,	0xE605005C), /* PORT92CR */
+	PORTCR(93,	0xE605005D), /* PORT93CR */
+	PORTCR(94,	0xE605005E), /* PORT94CR */
+	PORTCR(95,	0xE605005F), /* PORT95CR */
+	PORTCR(96,	0xE6050060), /* PORT96CR */
+	PORTCR(97,	0xE6050061), /* PORT97CR */
+	PORTCR(98,	0xE6050062), /* PORT98CR */
+	PORTCR(99,	0xE6050063), /* PORT99CR */
+	PORTCR(100,	0xE6053064), /* PORT100CR */
+	PORTCR(101,	0xE6053065), /* PORT101CR */
+	PORTCR(102,	0xE6053066), /* PORT102CR */
+	PORTCR(103,	0xE6053067), /* PORT103CR */
+	PORTCR(104,	0xE6053068), /* PORT104CR */
+	PORTCR(105,	0xE6053069), /* PORT105CR */
+	PORTCR(106,	0xE605306A), /* PORT106CR */
+	PORTCR(107,	0xE605306B), /* PORT107CR */
+	PORTCR(108,	0xE605306C), /* PORT108CR */
+	PORTCR(109,	0xE605306D), /* PORT109CR */
+	PORTCR(110,	0xE605306E), /* PORT110CR */
+	PORTCR(111,	0xE605306F), /* PORT111CR */
+	PORTCR(112,	0xE6053070), /* PORT112CR */
+	PORTCR(113,	0xE6053071), /* PORT113CR */
+	PORTCR(114,	0xE6053072), /* PORT114CR */
+	PORTCR(115,	0xE6053073), /* PORT115CR */
+	PORTCR(116,	0xE6053074), /* PORT116CR */
+	PORTCR(117,	0xE6053075), /* PORT117CR */
+	PORTCR(118,	0xE6053076), /* PORT118CR */
+	PORTCR(119,	0xE6053077), /* PORT119CR */
+	PORTCR(120,	0xE6053078), /* PORT120CR */
+	PORTCR(121,	0xE6050079), /* PORT121CR */
+	PORTCR(122,	0xE605007A), /* PORT122CR */
+	PORTCR(123,	0xE605007B), /* PORT123CR */
+	PORTCR(124,	0xE605007C), /* PORT124CR */
+	PORTCR(125,	0xE605007D), /* PORT125CR */
+	PORTCR(126,	0xE605007E), /* PORT126CR */
+	PORTCR(127,	0xE605007F), /* PORT127CR */
+	PORTCR(128,	0xE6050080), /* PORT128CR */
+	PORTCR(129,	0xE6050081), /* PORT129CR */
+	PORTCR(130,	0xE6050082), /* PORT130CR */
+	PORTCR(131,	0xE6050083), /* PORT131CR */
+	PORTCR(132,	0xE6050084), /* PORT132CR */
+	PORTCR(133,	0xE6050085), /* PORT133CR */
+	PORTCR(134,	0xE6050086), /* PORT134CR */
+	PORTCR(135,	0xE6050087), /* PORT135CR */
+	PORTCR(136,	0xE6050088), /* PORT136CR */
+	PORTCR(137,	0xE6050089), /* PORT137CR */
+	PORTCR(138,	0xE605008A), /* PORT138CR */
+	PORTCR(139,	0xE605008B), /* PORT139CR */
+	PORTCR(140,	0xE605008C), /* PORT140CR */
+	PORTCR(141,	0xE605008D), /* PORT141CR */
+	PORTCR(142,	0xE605008E), /* PORT142CR */
+	PORTCR(143,	0xE605008F), /* PORT143CR */
+	PORTCR(144,	0xE6050090), /* PORT144CR */
+	PORTCR(145,	0xE6050091), /* PORT145CR */
+	PORTCR(146,	0xE6050092), /* PORT146CR */
+	PORTCR(147,	0xE6050093), /* PORT147CR */
+	PORTCR(148,	0xE6050094), /* PORT148CR */
+	PORTCR(149,	0xE6050095), /* PORT149CR */
+	PORTCR(150,	0xE6050096), /* PORT150CR */
+	PORTCR(151,	0xE6050097), /* PORT151CR */
+	PORTCR(152,	0xE6053098), /* PORT152CR */
+	PORTCR(153,	0xE6053099), /* PORT153CR */
+	PORTCR(154,	0xE605309A), /* PORT154CR */
+	PORTCR(155,	0xE605309B), /* PORT155CR */
+	PORTCR(156,	0xE605009C), /* PORT156CR */
+	PORTCR(157,	0xE605009D), /* PORT157CR */
+	PORTCR(158,	0xE605009E), /* PORT158CR */
+	PORTCR(159,	0xE605009F), /* PORT159CR */
+	PORTCR(160,	0xE60500A0), /* PORT160CR */
+	PORTCR(161,	0xE60500A1), /* PORT161CR */
+	PORTCR(162,	0xE60500A2), /* PORT162CR */
+	PORTCR(163,	0xE60500A3), /* PORT163CR */
+	PORTCR(164,	0xE60500A4), /* PORT164CR */
+	PORTCR(165,	0xE60500A5), /* PORT165CR */
+	PORTCR(166,	0xE60500A6), /* PORT166CR */
+	PORTCR(167,	0xE60520A7), /* PORT167CR */
+	PORTCR(168,	0xE60520A8), /* PORT168CR */
+	PORTCR(169,	0xE60520A9), /* PORT169CR */
+	PORTCR(170,	0xE60520AA), /* PORT170CR */
+	PORTCR(171,	0xE60520AB), /* PORT171CR */
+	PORTCR(172,	0xE60520AC), /* PORT172CR */
+	PORTCR(173,	0xE60520AD), /* PORT173CR */
+	PORTCR(174,	0xE60520AE), /* PORT174CR */
+	PORTCR(175,	0xE60520AF), /* PORT175CR */
+	PORTCR(176,	0xE60520B0), /* PORT176CR */
+	PORTCR(177,	0xE60520B1), /* PORT177CR */
+	PORTCR(178,	0xE60520B2), /* PORT178CR */
+	PORTCR(179,	0xE60520B3), /* PORT179CR */
+	PORTCR(180,	0xE60520B4), /* PORT180CR */
+	PORTCR(181,	0xE60520B5), /* PORT181CR */
+	PORTCR(182,	0xE60520B6), /* PORT182CR */
+	PORTCR(183,	0xE60520B7), /* PORT183CR */
+	PORTCR(184,	0xE60520B8), /* PORT184CR */
+	PORTCR(185,	0xE60520B9), /* PORT185CR */
+	PORTCR(186,	0xE60520BA), /* PORT186CR */
+	PORTCR(187,	0xE60520BB), /* PORT187CR */
+	PORTCR(188,	0xE60520BC), /* PORT188CR */
+	PORTCR(189,	0xE60520BD), /* PORT189CR */
+	PORTCR(190,	0xE60520BE), /* PORT190CR */
+
+	{ PINMUX_CFG_REG("MSEL1CR", 0xE605800C, 32, 1) {
+			MSEL1CR_31_0,	MSEL1CR_31_1,
+			MSEL1CR_30_0,	MSEL1CR_30_1,
+			MSEL1CR_29_0,	MSEL1CR_29_1,
+			MSEL1CR_28_0,	MSEL1CR_28_1,
+			MSEL1CR_27_0,	MSEL1CR_27_1,
+			MSEL1CR_26_0,	MSEL1CR_26_1,
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			MSEL1CR_16_0,	MSEL1CR_16_1,
+			MSEL1CR_15_0,	MSEL1CR_15_1,
+			MSEL1CR_14_0,	MSEL1CR_14_1,
+			MSEL1CR_13_0,	MSEL1CR_13_1,
+			MSEL1CR_12_0,	MSEL1CR_12_1,
+			0, 0, 0, 0,
+			MSEL1CR_9_0,	MSEL1CR_9_1,
+			MSEL1CR_8_0,	MSEL1CR_8_1,
+			MSEL1CR_7_0,	MSEL1CR_7_1,
+			MSEL1CR_6_0,	MSEL1CR_6_1,
+			0, 0,
+			MSEL1CR_4_0,	MSEL1CR_4_1,
+			MSEL1CR_3_0,	MSEL1CR_3_1,
+			MSEL1CR_2_0,	MSEL1CR_2_1,
+			0, 0,
+			MSEL1CR_0_0,	MSEL1CR_0_1,
+		}
+	},
+	{ PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			MSEL3CR_27_0,	MSEL3CR_27_1,
+			MSEL3CR_26_0,	MSEL3CR_26_1,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			MSEL3CR_21_0,	MSEL3CR_21_1,
+			MSEL3CR_20_0,	MSEL3CR_20_1,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			MSEL3CR_15_0,	MSEL3CR_15_1,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0,
+			MSEL3CR_9_0,	MSEL3CR_9_1,
+			0, 0, 0, 0,
+			MSEL3CR_6_0,	MSEL3CR_6_1,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			}
+	},
+	{ PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			MSEL4CR_19_0,	MSEL4CR_19_1,
+			MSEL4CR_18_0,	MSEL4CR_18_1,
+			MSEL4CR_17_0,	MSEL4CR_17_1,
+			MSEL4CR_16_0,	MSEL4CR_16_1,
+			MSEL4CR_15_0,	MSEL4CR_15_1,
+			MSEL4CR_14_0,	MSEL4CR_14_1,
+			0, 0, 0, 0,
+			0, 0,
+			MSEL4CR_10_0,	MSEL4CR_10_1,
+			0, 0, 0, 0,
+			0, 0,
+			MSEL4CR_6_0,	MSEL4CR_6_1,
+			0, 0,
+			MSEL4CR_4_0,	MSEL4CR_4_1,
+			0, 0, 0, 0,
+			MSEL4CR_1_0,	MSEL4CR_1_1,
+			0, 0,
+		}
+	},
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PORTL095_064DR", 0xE6054008, 32) {
+			PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+			PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+			PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+			PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+			PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTL127_096DR", 0xE605400C, 32) {
+			PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
+			PORT123_DATA, PORT122_DATA, PORT121_DATA, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			PORT99_DATA,  PORT98_DATA,  PORT97_DATA,  PORT96_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTL159_128DR", 0xE6054010, 32) {
+			PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+			0, 0, 0, 0,
+			PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+			PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+			PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+			PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+			PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+			PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTL191_160DR", 0xE6054014, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0,	      PORT166_DATA, PORT165_DATA, PORT164_DATA,
+			PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTD031_000DR", 0xE6055000, 32) {
+			PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+			PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+			PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+			PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+			PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+			PORT11_DATA, PORT10_DATA, PORT9_DATA,  PORT8_DATA,
+			PORT7_DATA,  PORT6_DATA,  PORT5_DATA,  PORT4_DATA,
+			PORT3_DATA,  PORT2_DATA,  PORT1_DATA,  PORT0_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTD063_032DR", 0xE6055004, 32) {
+			0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			0,           0,           PORT45_DATA, PORT44_DATA,
+			PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+			PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+			PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTR063_032DR", 0xE6056004, 32) {
+			PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+			PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+			PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+			PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+			PORT47_DATA, PORT46_DATA, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTR095_064DR", 0xE6056008, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+			PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+			PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTR191_160DR", 0xE6056014, 32) {
+			0,	      PORT190_DATA, PORT189_DATA, PORT188_DATA,
+			PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
+			PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
+			PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
+			PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
+			PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
+			PORT167_DATA, 0, 0, 0,
+			0, 0, 0, 0,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTU127_096DR", 0xE605700C, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, PORT120_DATA,
+			PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+			PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+			PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+			PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+			PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+			0, 0, 0, 0,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTU159_128DR", 0xE6057010, 32) {
+			0, 0, 0, 0,
+			PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+		}
+	},
+	{ },
+};
+
+static struct pinmux_info sh7372_pinmux_info = {
+	.name = "sh7372_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PORT0,
+	.last_gpio = GPIO_FN_SDENC_DV_CLKI,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7372_pinmux_init(void)
+{
+	register_pinmux(&sh7372_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c
new file mode 100644
index 0000000..613e684
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7377.c
@@ -0,0 +1,1767 @@
+/*
+ * sh7377 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010  NISHIMOTO Hiroki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7377.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx)				\
+	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
+	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
+	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
+	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
+	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _90(fn, pfx, sfx)				\
+	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
+	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
+	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
+	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
+	_10(fn, pfx##9, sfx)
+
+#define _265(fn, pfx, sfx)				\
+	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
+	_10(fn, pfx##10, sfx),				\
+	_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx),	\
+	_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx),	\
+	_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx),	\
+	_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx),	\
+	_1(fn, pfx##118, sfx),				\
+	_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx),	\
+	_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx),	\
+	_10(fn, pfx##15, sfx),				\
+	_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx),	\
+	_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx),	\
+	_1(fn, pfx##164, sfx),				\
+	_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx),	\
+	_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx),	\
+	_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx),	\
+	_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx),	\
+	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
+	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
+	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
+	_1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx),	\
+	_1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx),	\
+	_1(fn, pfx##264, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_265(str) _265(_PORT, PORT, str)
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PORT_265(IN), /* PORT0_IN -> PORT264_IN */
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_INPUT_PULLDOWN_BEGIN,
+	PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
+	PINMUX_INPUT_PULLDOWN_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
+	PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
+	PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */
+	PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */
+	PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */
+	PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */
+	PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */
+	PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */
+	PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */
+	PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */
+
+	MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
+	MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	/* Special Pull-up / Pull-down Functions */
+	PORT66_KEYIN0_PU_MARK, PORT67_KEYIN1_PU_MARK,
+	PORT68_KEYIN2_PU_MARK, PORT69_KEYIN3_PU_MARK,
+	PORT70_KEYIN4_PU_MARK, PORT71_KEYIN5_PU_MARK,
+	PORT72_KEYIN6_PU_MARK,
+
+	/* 55-1 */
+	VBUS_0_MARK,
+	CPORT0_MARK,
+	CPORT1_MARK,
+	CPORT2_MARK,
+	CPORT3_MARK,
+	CPORT4_MARK,
+	CPORT5_MARK,
+	CPORT6_MARK,
+	CPORT7_MARK,
+	CPORT8_MARK,
+	CPORT9_MARK,
+	CPORT10_MARK,
+	CPORT11_MARK, SIN2_MARK,
+	CPORT12_MARK, XCTS2_MARK,
+	CPORT13_MARK, RFSPO4_MARK,
+	CPORT14_MARK, RFSPO5_MARK,
+	CPORT15_MARK, SCIFA0_SCK_MARK, GPS_AGC2_MARK,
+	CPORT16_MARK, SCIFA0_TXD_MARK, GPS_AGC3_MARK,
+	CPORT17_IC_OE_MARK, SOUT2_MARK,
+	CPORT18_MARK, XRTS2_MARK, PORT19_VIO_CKO2_MARK,
+	CPORT19_MPORT1_MARK,
+	CPORT20_MARK, RFSPO6_MARK,
+	CPORT21_MARK, STATUS0_MARK,
+	CPORT22_MARK, STATUS1_MARK,
+	CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK,
+	B_SYNLD1_MARK,
+	B_SYNLD2_MARK, SYSENMSK_MARK,
+	XMAINPS_MARK,
+	XDIVPS_MARK,
+	XIDRST_MARK,
+	IDCLK_MARK, IC_DP_MARK,
+	IDIO_MARK, IC_DM_MARK,
+	SOUT1_MARK, SCIFA4_TXD_MARK, M02_BERDAT_MARK,
+	SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK,
+	XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK,
+	XCTS1_MARK, SCIFA4_CTS_MARK,
+	PCMCLKO_MARK,
+	SYNC8KO_MARK,
+
+	/* 55-2 */
+	DNPCM_A_MARK,
+	UPPCM_A_MARK,
+	VACK_MARK,
+	XTALB1L_MARK,
+	GPS_AGC1_MARK, SCIFA0_RTS_MARK,
+	GPS_AGC4_MARK, SCIFA0_RXD_MARK,
+	GPS_PWRDOWN_MARK, SCIFA0_CTS_MARK,
+	GPS_IM_MARK,
+	GPS_IS_MARK,
+	GPS_QM_MARK,
+	GPS_QS_MARK,
+	FMSOCK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK,
+	FMSOOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, IPORT3_MARK,
+	FMSIOLR_MARK,
+	FMSOOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, OPORT1_MARK,
+	FMSIOBT_MARK,
+	FMSOSLD_MARK, BBIF2_TXD2_MARK, OPORT2_MARK,
+	FMSOILR_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, OPORT3_MARK,
+	FMSIILR_MARK,
+	FMSOIBT_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FMSIIBT_MARK,
+	FMSISLD_MARK, MFG0_OUT1_MARK, TPU0TO0_MARK,
+	A0_EA0_MARK, BS_MARK,
+	A12_EA12_MARK, PORT58_VIO_CKOR_MARK, TPU4TO2_MARK,
+	A13_EA13_MARK, PORT59_IROUT_MARK, MFG0_OUT2_MARK, TPU0TO1_MARK,
+	A14_EA14_MARK, PORT60_KEYOUT5_MARK,
+	A15_EA15_MARK, PORT61_KEYOUT4_MARK,
+	A16_EA16_MARK, PORT62_KEYOUT3_MARK, MSIOF0_SS1_MARK,
+	A17_EA17_MARK, PORT63_KEYOUT2_MARK, MSIOF0_TSYNC_MARK,
+	A18_EA18_MARK, PORT64_KEYOUT1_MARK, MSIOF0_TSCK_MARK,
+	A19_EA19_MARK, PORT65_KEYOUT0_MARK, MSIOF0_TXD_MARK,
+	A20_EA20_MARK, PORT66_KEYIN0_MARK, MSIOF0_RSCK_MARK,
+	A21_EA21_MARK, PORT67_KEYIN1_MARK, MSIOF0_RSYNC_MARK,
+	A22_EA22_MARK, PORT68_KEYIN2_MARK, MSIOF0_MCK0_MARK,
+	A23_EA23_MARK, PORT69_KEYIN3_MARK, MSIOF0_MCK1_MARK,
+	A24_EA24_MARK, PORT70_KEYIN4_MARK, MSIOF0_RXD_MARK,
+	A25_EA25_MARK, PORT71_KEYIN5_MARK, MSIOF0_SS2_MARK,
+	A26_MARK, PORT72_KEYIN6_MARK,
+	D0_ED0_NAF0_MARK,
+	D1_ED1_NAF1_MARK,
+	D2_ED2_NAF2_MARK,
+	D3_ED3_NAF3_MARK,
+	D4_ED4_NAF4_MARK,
+	D5_ED5_NAF5_MARK,
+	D6_ED6_NAF6_MARK,
+	D7_ED7_NAF7_MARK,
+	D8_ED8_NAF8_MARK,
+	D9_ED9_NAF9_MARK,
+	D10_ED10_NAF10_MARK,
+	D11_ED11_NAF11_MARK,
+	D12_ED12_NAF12_MARK,
+	D13_ED13_NAF13_MARK,
+	D14_ED14_NAF14_MARK,
+	D15_ED15_NAF15_MARK,
+	CS4_MARK,
+	CS5A_MARK, FMSICK_MARK,
+	CS5B_MARK, FCE1_MARK,
+
+	/* 55-3 */
+	CS6B_MARK, XCS2_MARK, CS6A_MARK, DACK0_MARK,
+	FCE0_MARK,
+	WAIT_MARK, DREQ0_MARK,
+	RD_XRD_MARK,
+	WE0_XWR0_FWE_MARK,
+	WE1_XWR1_MARK,
+	FRB_MARK,
+	CKO_MARK,
+	NBRSTOUT_MARK,
+	NBRST_MARK,
+	GPS_EPPSIN_MARK,
+	LATCHPULSE_MARK,
+	LTESIGNAL_MARK,
+	LEGACYSTATE_MARK,
+	TCKON_MARK,
+	VIO_VD_MARK, PORT128_KEYOUT0_MARK, IPORT0_MARK,
+	VIO_HD_MARK, PORT129_KEYOUT1_MARK, IPORT1_MARK,
+	VIO_D0_MARK, PORT130_KEYOUT2_MARK, PORT130_MSIOF2_RXD_MARK,
+	VIO_D1_MARK, PORT131_KEYOUT3_MARK, PORT131_MSIOF2_SS1_MARK,
+	VIO_D2_MARK, PORT132_KEYOUT4_MARK, PORT132_MSIOF2_SS2_MARK,
+	VIO_D3_MARK, PORT133_KEYOUT5_MARK, PORT133_MSIOF2_TSYNC_MARK,
+	VIO_D4_MARK, PORT134_KEYIN0_MARK, PORT134_MSIOF2_TXD_MARK,
+	VIO_D5_MARK, PORT135_KEYIN1_MARK, PORT135_MSIOF2_TSCK_MARK,
+	VIO_D6_MARK, PORT136_KEYIN2_MARK,
+	VIO_D7_MARK, PORT137_KEYIN3_MARK,
+	VIO_D8_MARK, M9_SLCD_A01_MARK, PORT138_FSIAOMC_MARK,
+	VIO_D9_MARK, M10_SLCD_CK1_MARK, PORT139_FSIAOLR_MARK,
+	VIO_D10_MARK, M11_SLCD_SO1_MARK, TPU0TO2_MARK, PORT140_FSIAOBT_MARK,
+	VIO_D11_MARK, M12_SLCD_CE1_MARK, TPU0TO3_MARK, PORT141_FSIAOSLD_MARK,
+	VIO_D12_MARK, M13_BSW_MARK, PORT142_FSIACK_MARK,
+	VIO_D13_MARK, M14_GSW_MARK, PORT143_FSIAILR_MARK,
+	VIO_D14_MARK, M15_RSW_MARK, PORT144_FSIAIBT_MARK,
+	VIO_D15_MARK, TPU1TO3_MARK, PORT145_FSIAISLD_MARK,
+	VIO_CLK_MARK, PORT146_KEYIN4_MARK, IPORT2_MARK,
+	VIO_FIELD_MARK, PORT147_KEYIN5_MARK,
+	VIO_CKO_MARK, PORT148_KEYIN6_MARK,
+	A27_MARK, RDWR_XWE_MARK, MFG0_IN1_MARK,
+	MFG0_IN2_MARK,
+	TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK,
+	TS_SDAT3_MARK, MSIOF2_RSYNC_MARK,
+	TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK,
+	SOUT3_MARK, SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK,
+	SIN3_MARK, SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK,
+	XRTS3_MARK, SCIFA2_RTS1_MARK, PORT156_MSIOF2_SS2_MARK,
+	XCTS3_MARK, SCIFA2_CTS1_MARK, PORT157_MSIOF2_RXD_MARK,
+
+	/* 55-4 */
+	DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
+	PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK,
+	PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK, SOUT0_MARK,
+	PORT161_SCIFB_CTS_MARK, PORT161_SCIFA5_CTS_MARK, XCTS0_MARK,
+	MFG3_IN2_MARK,
+	PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK, SIN0_MARK,
+	MFG3_IN1_MARK,
+	PORT163_SCIFB_RTS_MARK, PORT163_SCIFA5_RTS_MARK, XRTS0_MARK,
+	MFG3_OUT1_MARK, TPU3TO0_MARK,
+	LCDD0_MARK, PORT192_KEYOUT0_MARK, EXT_CKI_MARK,
+	LCDD1_MARK, PORT193_KEYOUT1_MARK, PORT193_SCIFA5_CTS_MARK,
+	BBIF2_TSYNC1_MARK,
+	LCDD2_MARK, PORT194_KEYOUT2_MARK, PORT194_SCIFA5_RTS_MARK,
+	BBIF2_TSCK1_MARK,
+	LCDD3_MARK, PORT195_KEYOUT3_MARK, PORT195_SCIFA5_RXD_MARK,
+	BBIF2_TXD1_MARK,
+	LCDD4_MARK, PORT196_KEYOUT4_MARK, PORT196_SCIFA5_TXD_MARK,
+	LCDD5_MARK, PORT197_KEYOUT5_MARK, PORT197_SCIFA5_SCK_MARK,
+	MFG2_OUT2_MARK,
+	TPU2TO1_MARK,
+	LCDD6_MARK, XWR2_MARK,
+	LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK, XWR3_MARK,
+	LCDD8_MARK, PORT200_KEYIN0_MARK, VIO_DR0_MARK, D16_MARK, ED16_MARK,
+	LCDD9_MARK, PORT201_KEYIN1_MARK, VIO_DR1_MARK, D17_MARK, ED17_MARK,
+	LCDD10_MARK, PORT202_KEYIN2_MARK, VIO_DR2_MARK, D18_MARK, ED18_MARK,
+	LCDD11_MARK, PORT203_KEYIN3_MARK, VIO_DR3_MARK, D19_MARK, ED19_MARK,
+	LCDD12_MARK, PORT204_KEYIN4_MARK, VIO_DR4_MARK, D20_MARK, ED20_MARK,
+	LCDD13_MARK, PORT205_KEYIN5_MARK, VIO_DR5_MARK, D21_MARK, ED21_MARK,
+	LCDD14_MARK, PORT206_KEYIN6_MARK, VIO_DR6_MARK, D22_MARK, ED22_MARK,
+	LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, PORT207_KEYOUT0_MARK,
+	VIO_DR7_MARK, D23_MARK, ED23_MARK,
+	LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, PORT208_KEYOUT1_MARK,
+	VIO_VDR_MARK, D24_MARK, ED24_MARK,
+	LCDD17_MARK, PORT209_KEYOUT2_MARK, VIO_HDR_MARK, D25_MARK, ED25_MARK,
+	LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK, ED26_MARK,
+	LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK, ED27_MARK,
+	LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK, ED28_MARK,
+	LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK, ED29_MARK,
+	LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK, ED30_MARK,
+	LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK, ED31_MARK,
+	LCDDCK_MARK, LCDWR_MARK, PORT216_KEYOUT3_MARK, VIO_CLKR_MARK,
+	LCDRD_MARK, DACK2_MARK, MSIOF0L_TSYNC_MARK,
+	LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK,
+	PORT218_VIO_CKOR_MARK, PORT218_KEYOUT4_MARK,
+	LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_TSCK_MARK,
+	LCDVSYN_MARK, LCDVSYN2_MARK, PORT220_KEYOUT5_MARK,
+	LCDLCLK_MARK, DREQ1_MARK, PWEN_MARK, MSIOF0L_RXD_MARK,
+	LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK,
+	SCIFA1_TXD_MARK, OVCN2_MARK,
+	EXTLP_MARK, SCIFA1_SCK_MARK, USBTERM_MARK, PORT226_VIO_CKO2_MARK,
+	SCIFA1_RTS_MARK, IDIN_MARK,
+	SCIFA1_RXD_MARK,
+	SCIFA1_CTS_MARK, MFG1_IN1_MARK,
+	MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK, PORT230_FSIAOMC_MARK,
+	MSIOF1_TSYNC_MARK, SCIFA2_CTS2_MARK, PORT231_FSIAOLR_MARK,
+	MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK, PORT232_FSIAOBT_MARK,
+	MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK, GPS_VCOTRIG_MARK,
+	PORT233_FSIACK_MARK,
+	MSIOF1_RSCK_MARK, SCIFA2_RTS2_MARK, PORT234_FSIAOSLD_MARK,
+	MSIOF1_RSYNC_MARK, OPORT0_MARK, MFG1_IN2_MARK, PORT235_FSIAILR_MARK,
+	MSIOF1_MCK0_MARK, I2C_SDA2_MARK, PORT236_FSIAIBT_MARK,
+	MSIOF1_MCK1_MARK, I2C_SCL2_MARK, PORT237_FSIAISLD_MARK,
+	MSIOF1_SS1_MARK, EDBGREQ3_MARK,
+
+	/* 55-5 */
+	MSIOF1_SS2_MARK,
+	SCIFA6_TXD_MARK,
+	PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK,
+	TPU4TO0_MARK,
+	PORT242_IRDA_IN_MARK, MFG4_IN2_MARK,
+	PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK,
+	PORT244_SCIFA5_CTS_MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS_MARK,
+	PORT244_MSIOF2_RXD_MARK,
+	PORT245_SCIFA5_RTS_MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS_MARK,
+	PORT245_MSIOF2_TXD_MARK,
+	PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK,
+	TPU1TO0_MARK,
+	PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK,
+	TPU3TO1_MARK,
+	PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK,
+	TPU2TO0_MARK,
+	PORT248_MSIOF2_TSCK_MARK,
+	PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_MSIOF2_TSYNC_MARK,
+	SDHICLK0_MARK, TCK2_SWCLK_MC0_MARK,
+	SDHICD0_MARK,
+	SDHID0_0_MARK, TMS2_SWDIO_MC0_MARK,
+	SDHID0_1_MARK, TDO2_SWO0_MC0_MARK,
+	SDHID0_2_MARK, TDI2_MARK,
+	SDHID0_3_MARK, RTCK2_SWO1_MC0_MARK,
+	SDHICMD0_MARK, TRST2_MARK,
+	SDHIWP0_MARK, EDBGREQ2_MARK,
+	SDHICLK1_MARK, TCK3_SWCLK_MC1_MARK,
+	SDHID1_0_MARK, M11_SLCD_SO2_MARK, TS_SPSYNC2_MARK,
+	TMS3_SWDIO_MC1_MARK,
+	SDHID1_1_MARK, M9_SLCD_A02_MARK, TS_SDAT2_MARK, TDO3_SWO0_MC1_MARK,
+	SDHID1_2_MARK, M10_SLCD_CK2_MARK, TS_SDEN2_MARK, TDI3_MARK,
+	SDHID1_3_MARK, M12_SLCD_CE2_MARK, TS_SCK2_MARK, RTCK3_SWO1_MC1_MARK,
+	SDHICMD1_MARK, TRST3_MARK,
+	RESETOUTS_MARK,
+	PINMUX_MARK_END,
+};
+
+#define PORT_DATA_I(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_IN, PORT##nr##_IN_PD,	\
+				PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN,		\
+				PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN,		\
+				PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN,		\
+				PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+static pinmux_enum_t pinmux_data[] = {
+	/* specify valid pin states for each pin in GPIO mode */
+	/* 55-1 (GPIO) */
+	PORT_DATA_I_PD(0), PORT_DATA_I_PU(1),
+	PORT_DATA_I_PU(2), PORT_DATA_I_PU(3),
+	PORT_DATA_I_PU(4), PORT_DATA_I_PU(5),
+	PORT_DATA_I_PU(6), PORT_DATA_I_PU(7),
+	PORT_DATA_I_PU(8), PORT_DATA_I_PU(9),
+	PORT_DATA_I_PU(10), PORT_DATA_I_PU(11),
+	PORT_DATA_IO_PU(12), PORT_DATA_IO_PU(13),
+	PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15),
+	PORT_DATA_O(16), PORT_DATA_IO(17),
+	PORT_DATA_O(18), PORT_DATA_O(19),
+	PORT_DATA_O(20), PORT_DATA_O(21),
+	PORT_DATA_O(22), PORT_DATA_O(23),
+	PORT_DATA_O(24), PORT_DATA_I_PD(25),
+	PORT_DATA_I_PD(26), PORT_DATA_O(27),
+	PORT_DATA_O(28), PORT_DATA_O(29),
+	PORT_DATA_IO(30), PORT_DATA_IO_PU(31),
+	PORT_DATA_IO_PD(32), PORT_DATA_I_PU(33),
+	PORT_DATA_IO_PD(34), PORT_DATA_I_PU_PD(35),
+	PORT_DATA_O(36), PORT_DATA_IO(37),
+
+	/* 55-2 (GPIO) */
+	PORT_DATA_O(38), PORT_DATA_I_PU(39),
+	PORT_DATA_I_PU_PD(40), PORT_DATA_O(41),
+	PORT_DATA_IO_PD(42), PORT_DATA_IO_PD(43),
+	PORT_DATA_IO_PD(44), PORT_DATA_I_PD(45),
+	PORT_DATA_I_PD(46), PORT_DATA_I_PD(47),
+	PORT_DATA_I_PD(48), PORT_DATA_IO_PU_PD(49),
+	PORT_DATA_IO_PD(50), PORT_DATA_IO_PD(51),
+	PORT_DATA_O(52), PORT_DATA_IO_PU_PD(53),
+	PORT_DATA_IO_PU_PD(54), PORT_DATA_IO_PD(55),
+	PORT_DATA_I_PU_PD(56), PORT_DATA_IO(57),
+	PORT_DATA_IO(58), PORT_DATA_IO(59),
+	PORT_DATA_IO(60), PORT_DATA_IO(61),
+	PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63),
+	PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65),
+	PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67),
+	PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69),
+	PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71),
+	PORT_DATA_IO_PU_PD(72), PORT_DATA_I_PU_PD(73),
+	PORT_DATA_IO_PU(74), PORT_DATA_IO_PU(75),
+	PORT_DATA_IO_PU(76), PORT_DATA_IO_PU(77),
+	PORT_DATA_IO_PU(78), PORT_DATA_IO_PU(79),
+	PORT_DATA_IO_PU(80), PORT_DATA_IO_PU(81),
+	PORT_DATA_IO_PU(82), PORT_DATA_IO_PU(83),
+	PORT_DATA_IO_PU(84), PORT_DATA_IO_PU(85),
+	PORT_DATA_IO_PU(86), PORT_DATA_IO_PU(87),
+	PORT_DATA_IO_PU(88), PORT_DATA_IO_PU(89),
+	PORT_DATA_O(90), PORT_DATA_IO_PU(91),
+	PORT_DATA_O(92),
+
+	/* 55-3 (GPIO) */
+	PORT_DATA_IO_PU(93),
+	PORT_DATA_O(94),
+	PORT_DATA_I_PU_PD(95),
+	PORT_DATA_IO(96), PORT_DATA_IO(97),
+	PORT_DATA_IO(98), PORT_DATA_I_PU(99),
+	PORT_DATA_O(100), PORT_DATA_O(101),
+	PORT_DATA_I_PU(102), PORT_DATA_IO_PD(103),
+	PORT_DATA_I_PD(104), PORT_DATA_I_PD(105),
+	PORT_DATA_I_PD(106), PORT_DATA_I_PD(107),
+	PORT_DATA_I_PD(108), PORT_DATA_IO_PD(109),
+	PORT_DATA_IO_PD(110), PORT_DATA_I_PD(111),
+	PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113),
+	PORT_DATA_IO_PD(114), PORT_DATA_I_PD(115),
+	PORT_DATA_I_PD(116), PORT_DATA_IO_PD(117),
+	PORT_DATA_I_PD(118), PORT_DATA_IO_PD(128),
+	PORT_DATA_IO_PD(129), PORT_DATA_IO_PD(130),
+	PORT_DATA_IO_PD(131), PORT_DATA_IO_PD(132),
+	PORT_DATA_IO_PD(133), PORT_DATA_IO_PU_PD(134),
+	PORT_DATA_IO_PU_PD(135), PORT_DATA_IO_PU_PD(136),
+	PORT_DATA_IO_PU_PD(137), PORT_DATA_IO_PD(138),
+	PORT_DATA_IO_PD(139), PORT_DATA_IO_PD(140),
+	PORT_DATA_IO_PD(141), PORT_DATA_IO_PD(142),
+	PORT_DATA_IO_PD(143), PORT_DATA_IO_PU_PD(144),
+	PORT_DATA_IO_PD(145), PORT_DATA_IO_PU_PD(146),
+	PORT_DATA_IO_PU_PD(147), PORT_DATA_IO_PU_PD(148),
+	PORT_DATA_IO_PU_PD(149), PORT_DATA_I_PD(150),
+	PORT_DATA_IO_PU_PD(151), PORT_DATA_IO_PD(152),
+	PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154),
+	PORT_DATA_I_PD(155), PORT_DATA_IO_PU_PD(156),
+	PORT_DATA_I_PD(157), PORT_DATA_IO_PD(158),
+
+	/* 55-4 (GPIO) */
+	PORT_DATA_IO_PU_PD(159), PORT_DATA_IO_PU_PD(160),
+	PORT_DATA_I_PU_PD(161), PORT_DATA_I_PU_PD(162),
+	PORT_DATA_IO_PU_PD(163), PORT_DATA_I_PU_PD(164),
+	PORT_DATA_IO_PD(192), PORT_DATA_IO_PD(193),
+	PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195),
+	PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197),
+	PORT_DATA_IO_PD(198), PORT_DATA_IO_PD(199),
+	PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU_PD(201),
+	PORT_DATA_IO_PU_PD(202), PORT_DATA_IO_PU_PD(203),
+	PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205),
+	PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PD(207),
+	PORT_DATA_IO_PD(208), PORT_DATA_IO_PD(209),
+	PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
+	PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213),
+	PORT_DATA_IO_PD(214), PORT_DATA_IO_PD(215),
+	PORT_DATA_IO_PD(216), PORT_DATA_IO_PD(217),
+	PORT_DATA_O(218), PORT_DATA_IO_PD(219),
+	PORT_DATA_IO_PD(220), PORT_DATA_IO_PD(221),
+	PORT_DATA_IO_PU_PD(222),
+	PORT_DATA_I_PU_PD(223), PORT_DATA_I_PU_PD(224),
+	PORT_DATA_IO_PU_PD(225), PORT_DATA_O(226),
+	PORT_DATA_IO_PU_PD(227), PORT_DATA_I_PD(228),
+	PORT_DATA_I_PD(229), PORT_DATA_IO(230),
+	PORT_DATA_IO_PD(231), PORT_DATA_IO_PU_PD(232),
+	PORT_DATA_I_PD(233), PORT_DATA_IO_PU_PD(234),
+	PORT_DATA_IO_PU_PD(235), PORT_DATA_IO_PU_PD(236),
+	PORT_DATA_IO_PD(237), PORT_DATA_IO_PU_PD(238),
+
+	/* 55-5 (GPIO) */
+	PORT_DATA_IO_PU_PD(239), PORT_DATA_IO_PU_PD(240),
+	PORT_DATA_O(241), PORT_DATA_I_PD(242),
+	PORT_DATA_IO_PU_PD(243), PORT_DATA_IO_PU_PD(244),
+	PORT_DATA_IO_PU_PD(245), PORT_DATA_IO_PU_PD(246),
+	PORT_DATA_IO_PU_PD(247), PORT_DATA_IO_PU_PD(248),
+	PORT_DATA_IO_PU_PD(249), PORT_DATA_IO_PD(250),
+	PORT_DATA_IO_PU_PD(251), PORT_DATA_IO_PU_PD(252),
+	PORT_DATA_IO_PU_PD(253), PORT_DATA_IO_PU_PD(254),
+	PORT_DATA_IO_PU_PD(255), PORT_DATA_IO_PU_PD(256),
+	PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PD(258),
+	PORT_DATA_IO_PU_PD(259), PORT_DATA_IO_PU_PD(260),
+	PORT_DATA_IO_PU_PD(261), PORT_DATA_IO_PU_PD(262),
+	PORT_DATA_IO_PU_PD(263),
+
+	/* Special Pull-up / Pull-down Functions */
+	PINMUX_DATA(PORT66_KEYIN0_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT66_FN2, PORT66_IN_PU),
+	PINMUX_DATA(PORT67_KEYIN1_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT67_FN2, PORT67_IN_PU),
+	PINMUX_DATA(PORT68_KEYIN2_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT68_FN2, PORT68_IN_PU),
+	PINMUX_DATA(PORT69_KEYIN3_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT69_FN2, PORT69_IN_PU),
+	PINMUX_DATA(PORT70_KEYIN4_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT70_FN2, PORT70_IN_PU),
+	PINMUX_DATA(PORT71_KEYIN5_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT71_FN2, PORT71_IN_PU),
+	PINMUX_DATA(PORT72_KEYIN6_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT72_FN2, PORT72_IN_PU),
+
+
+	/* 55-1 (FN) */
+	PINMUX_DATA(VBUS_0_MARK, PORT0_FN1),
+	PINMUX_DATA(CPORT0_MARK, PORT1_FN1),
+	PINMUX_DATA(CPORT1_MARK, PORT2_FN1),
+	PINMUX_DATA(CPORT2_MARK, PORT3_FN1),
+	PINMUX_DATA(CPORT3_MARK, PORT4_FN1),
+	PINMUX_DATA(CPORT4_MARK, PORT5_FN1),
+	PINMUX_DATA(CPORT5_MARK, PORT6_FN1),
+	PINMUX_DATA(CPORT6_MARK, PORT7_FN1),
+	PINMUX_DATA(CPORT7_MARK, PORT8_FN1),
+	PINMUX_DATA(CPORT8_MARK, PORT9_FN1),
+	PINMUX_DATA(CPORT9_MARK, PORT10_FN1),
+	PINMUX_DATA(CPORT10_MARK, PORT11_FN1),
+	PINMUX_DATA(CPORT11_MARK, PORT12_FN1),
+	PINMUX_DATA(SIN2_MARK, PORT12_FN2),
+	PINMUX_DATA(CPORT12_MARK, PORT13_FN1),
+	PINMUX_DATA(XCTS2_MARK, PORT13_FN2),
+	PINMUX_DATA(CPORT13_MARK, PORT14_FN1),
+	PINMUX_DATA(RFSPO4_MARK, PORT14_FN2),
+	PINMUX_DATA(CPORT14_MARK, PORT15_FN1),
+	PINMUX_DATA(RFSPO5_MARK, PORT15_FN2),
+	PINMUX_DATA(CPORT15_MARK, PORT16_FN1),
+	PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2),
+	PINMUX_DATA(GPS_AGC2_MARK, PORT16_FN3),
+	PINMUX_DATA(CPORT16_MARK, PORT17_FN1),
+	PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2),
+	PINMUX_DATA(GPS_AGC3_MARK, PORT17_FN3),
+	PINMUX_DATA(CPORT17_IC_OE_MARK, PORT18_FN1),
+	PINMUX_DATA(SOUT2_MARK, PORT18_FN2),
+	PINMUX_DATA(CPORT18_MARK, PORT19_FN1),
+	PINMUX_DATA(XRTS2_MARK, PORT19_FN2),
+	PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3),
+	PINMUX_DATA(CPORT19_MPORT1_MARK, PORT20_FN1),
+	PINMUX_DATA(CPORT20_MARK, PORT21_FN1),
+	PINMUX_DATA(RFSPO6_MARK, PORT21_FN2),
+	PINMUX_DATA(CPORT21_MARK, PORT22_FN1),
+	PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
+	PINMUX_DATA(CPORT22_MARK, PORT23_FN1),
+	PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
+	PINMUX_DATA(CPORT23_MARK, PORT24_FN1),
+	PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
+	PINMUX_DATA(RFSPO7_MARK, PORT24_FN3),
+	PINMUX_DATA(B_SYNLD1_MARK, PORT25_FN1),
+	PINMUX_DATA(B_SYNLD2_MARK, PORT26_FN1),
+	PINMUX_DATA(SYSENMSK_MARK, PORT26_FN2),
+	PINMUX_DATA(XMAINPS_MARK, PORT27_FN1),
+	PINMUX_DATA(XDIVPS_MARK, PORT28_FN1),
+	PINMUX_DATA(XIDRST_MARK, PORT29_FN1),
+	PINMUX_DATA(IDCLK_MARK, PORT30_FN1),
+	PINMUX_DATA(IC_DP_MARK, PORT30_FN2),
+	PINMUX_DATA(IDIO_MARK, PORT31_FN1),
+	PINMUX_DATA(IC_DM_MARK, PORT31_FN2),
+	PINMUX_DATA(SOUT1_MARK, PORT32_FN1),
+	PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2),
+	PINMUX_DATA(M02_BERDAT_MARK, PORT32_FN3),
+	PINMUX_DATA(SIN1_MARK, PORT33_FN1),
+	PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2),
+	PINMUX_DATA(XWUP_MARK, PORT33_FN3),
+	PINMUX_DATA(XRTS1_MARK, PORT34_FN1),
+	PINMUX_DATA(SCIFA4_RTS_MARK, PORT34_FN2),
+	PINMUX_DATA(M03_BERCLK_MARK, PORT34_FN3),
+	PINMUX_DATA(XCTS1_MARK, PORT35_FN1),
+	PINMUX_DATA(SCIFA4_CTS_MARK, PORT35_FN2),
+	PINMUX_DATA(PCMCLKO_MARK, PORT36_FN1),
+	PINMUX_DATA(SYNC8KO_MARK, PORT37_FN1),
+
+	/* 55-2 (FN) */
+	PINMUX_DATA(DNPCM_A_MARK, PORT38_FN1),
+	PINMUX_DATA(UPPCM_A_MARK, PORT39_FN1),
+	PINMUX_DATA(VACK_MARK, PORT40_FN1),
+	PINMUX_DATA(XTALB1L_MARK, PORT41_FN1),
+	PINMUX_DATA(GPS_AGC1_MARK, PORT42_FN1),
+	PINMUX_DATA(SCIFA0_RTS_MARK, PORT42_FN2),
+	PINMUX_DATA(GPS_AGC4_MARK, PORT43_FN1),
+	PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2),
+	PINMUX_DATA(GPS_PWRDOWN_MARK, PORT44_FN1),
+	PINMUX_DATA(SCIFA0_CTS_MARK, PORT44_FN2),
+	PINMUX_DATA(GPS_IM_MARK, PORT45_FN1),
+	PINMUX_DATA(GPS_IS_MARK, PORT46_FN1),
+	PINMUX_DATA(GPS_QM_MARK, PORT47_FN1),
+	PINMUX_DATA(GPS_QS_MARK, PORT48_FN1),
+	PINMUX_DATA(FMSOCK_MARK, PORT49_FN1),
+	PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2),
+	PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN3),
+	PINMUX_DATA(FMSOOLR_MARK, PORT50_FN1),
+	PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2),
+	PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3),
+	PINMUX_DATA(IPORT3_MARK, PORT50_FN4),
+	PINMUX_DATA(FMSIOLR_MARK, PORT50_FN5),
+	PINMUX_DATA(FMSOOBT_MARK, PORT51_FN1),
+	PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2),
+	PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3),
+	PINMUX_DATA(OPORT1_MARK, PORT51_FN4),
+	PINMUX_DATA(FMSIOBT_MARK, PORT51_FN5),
+	PINMUX_DATA(FMSOSLD_MARK, PORT52_FN1),
+	PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2),
+	PINMUX_DATA(OPORT2_MARK, PORT52_FN3),
+	PINMUX_DATA(FMSOILR_MARK, PORT53_FN1),
+	PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2),
+	PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3),
+	PINMUX_DATA(OPORT3_MARK, PORT53_FN4),
+	PINMUX_DATA(FMSIILR_MARK, PORT53_FN5),
+	PINMUX_DATA(FMSOIBT_MARK, PORT54_FN1),
+	PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2),
+	PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3),
+	PINMUX_DATA(FMSIIBT_MARK, PORT54_FN4),
+	PINMUX_DATA(FMSISLD_MARK, PORT55_FN1),
+	PINMUX_DATA(MFG0_OUT1_MARK, PORT55_FN2),
+	PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3),
+	PINMUX_DATA(A0_EA0_MARK, PORT57_FN1),
+	PINMUX_DATA(BS_MARK, PORT57_FN2),
+	PINMUX_DATA(A12_EA12_MARK, PORT58_FN1),
+	PINMUX_DATA(PORT58_VIO_CKOR_MARK, PORT58_FN2),
+	PINMUX_DATA(TPU4TO2_MARK, PORT58_FN3),
+	PINMUX_DATA(A13_EA13_MARK, PORT59_FN1),
+	PINMUX_DATA(PORT59_IROUT_MARK, PORT59_FN2),
+	PINMUX_DATA(MFG0_OUT2_MARK, PORT59_FN3),
+	PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4),
+	PINMUX_DATA(A14_EA14_MARK, PORT60_FN1),
+	PINMUX_DATA(PORT60_KEYOUT5_MARK, PORT60_FN2),
+	PINMUX_DATA(A15_EA15_MARK, PORT61_FN1),
+	PINMUX_DATA(PORT61_KEYOUT4_MARK, PORT61_FN2),
+	PINMUX_DATA(A16_EA16_MARK, PORT62_FN1),
+	PINMUX_DATA(PORT62_KEYOUT3_MARK, PORT62_FN2),
+	PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN3),
+	PINMUX_DATA(A17_EA17_MARK, PORT63_FN1),
+	PINMUX_DATA(PORT63_KEYOUT2_MARK, PORT63_FN2),
+	PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN3),
+	PINMUX_DATA(A18_EA18_MARK, PORT64_FN1),
+	PINMUX_DATA(PORT64_KEYOUT1_MARK, PORT64_FN2),
+	PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN3),
+	PINMUX_DATA(A19_EA19_MARK, PORT65_FN1),
+	PINMUX_DATA(PORT65_KEYOUT0_MARK, PORT65_FN2),
+	PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN3),
+	PINMUX_DATA(A20_EA20_MARK, PORT66_FN1),
+	PINMUX_DATA(PORT66_KEYIN0_MARK, PORT66_FN2),
+	PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN3),
+	PINMUX_DATA(A21_EA21_MARK, PORT67_FN1),
+	PINMUX_DATA(PORT67_KEYIN1_MARK, PORT67_FN2),
+	PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN3),
+	PINMUX_DATA(A22_EA22_MARK, PORT68_FN1),
+	PINMUX_DATA(PORT68_KEYIN2_MARK, PORT68_FN2),
+	PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN3),
+	PINMUX_DATA(A23_EA23_MARK, PORT69_FN1),
+	PINMUX_DATA(PORT69_KEYIN3_MARK, PORT69_FN2),
+	PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN3),
+	PINMUX_DATA(A24_EA24_MARK, PORT70_FN1),
+	PINMUX_DATA(PORT70_KEYIN4_MARK, PORT70_FN2),
+	PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN3),
+	PINMUX_DATA(A25_EA25_MARK, PORT71_FN1),
+	PINMUX_DATA(PORT71_KEYIN5_MARK, PORT71_FN2),
+	PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN3),
+	PINMUX_DATA(A26_MARK, PORT72_FN1),
+	PINMUX_DATA(PORT72_KEYIN6_MARK, PORT72_FN2),
+	PINMUX_DATA(D0_ED0_NAF0_MARK, PORT74_FN1),
+	PINMUX_DATA(D1_ED1_NAF1_MARK, PORT75_FN1),
+	PINMUX_DATA(D2_ED2_NAF2_MARK, PORT76_FN1),
+	PINMUX_DATA(D3_ED3_NAF3_MARK, PORT77_FN1),
+	PINMUX_DATA(D4_ED4_NAF4_MARK, PORT78_FN1),
+	PINMUX_DATA(D5_ED5_NAF5_MARK, PORT79_FN1),
+	PINMUX_DATA(D6_ED6_NAF6_MARK, PORT80_FN1),
+	PINMUX_DATA(D7_ED7_NAF7_MARK, PORT81_FN1),
+	PINMUX_DATA(D8_ED8_NAF8_MARK, PORT82_FN1),
+	PINMUX_DATA(D9_ED9_NAF9_MARK, PORT83_FN1),
+	PINMUX_DATA(D10_ED10_NAF10_MARK, PORT84_FN1),
+	PINMUX_DATA(D11_ED11_NAF11_MARK, PORT85_FN1),
+	PINMUX_DATA(D12_ED12_NAF12_MARK, PORT86_FN1),
+	PINMUX_DATA(D13_ED13_NAF13_MARK, PORT87_FN1),
+	PINMUX_DATA(D14_ED14_NAF14_MARK, PORT88_FN1),
+	PINMUX_DATA(D15_ED15_NAF15_MARK, PORT89_FN1),
+	PINMUX_DATA(CS4_MARK, PORT90_FN1),
+	PINMUX_DATA(CS5A_MARK, PORT91_FN1),
+	PINMUX_DATA(FMSICK_MARK, PORT91_FN2),
+	PINMUX_DATA(CS5B_MARK, PORT92_FN1),
+	PINMUX_DATA(FCE1_MARK, PORT92_FN2),
+
+	/* 55-3 (FN) */
+	PINMUX_DATA(CS6B_MARK, PORT93_FN1),
+	PINMUX_DATA(XCS2_MARK, PORT93_FN2),
+	PINMUX_DATA(CS6A_MARK, PORT93_FN3),
+	PINMUX_DATA(DACK0_MARK, PORT93_FN4),
+	PINMUX_DATA(FCE0_MARK, PORT94_FN1),
+	PINMUX_DATA(WAIT_MARK, PORT95_FN1),
+	PINMUX_DATA(DREQ0_MARK, PORT95_FN2),
+	PINMUX_DATA(RD_XRD_MARK, PORT96_FN1),
+	PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT97_FN1),
+	PINMUX_DATA(WE1_XWR1_MARK, PORT98_FN1),
+	PINMUX_DATA(FRB_MARK, PORT99_FN1),
+	PINMUX_DATA(CKO_MARK, PORT100_FN1),
+	PINMUX_DATA(NBRSTOUT_MARK, PORT101_FN1),
+	PINMUX_DATA(NBRST_MARK, PORT102_FN1),
+	PINMUX_DATA(GPS_EPPSIN_MARK, PORT106_FN1),
+	PINMUX_DATA(LATCHPULSE_MARK, PORT110_FN1),
+	PINMUX_DATA(LTESIGNAL_MARK, PORT111_FN1),
+	PINMUX_DATA(LEGACYSTATE_MARK, PORT112_FN1),
+	PINMUX_DATA(TCKON_MARK, PORT118_FN1),
+	PINMUX_DATA(VIO_VD_MARK, PORT128_FN1),
+	PINMUX_DATA(PORT128_KEYOUT0_MARK, PORT128_FN2),
+	PINMUX_DATA(IPORT0_MARK, PORT128_FN3),
+	PINMUX_DATA(VIO_HD_MARK, PORT129_FN1),
+	PINMUX_DATA(PORT129_KEYOUT1_MARK, PORT129_FN2),
+	PINMUX_DATA(IPORT1_MARK, PORT129_FN3),
+	PINMUX_DATA(VIO_D0_MARK, PORT130_FN1),
+	PINMUX_DATA(PORT130_KEYOUT2_MARK, PORT130_FN2),
+	PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3),
+	PINMUX_DATA(VIO_D1_MARK, PORT131_FN1),
+	PINMUX_DATA(PORT131_KEYOUT3_MARK, PORT131_FN2),
+	PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3),
+	PINMUX_DATA(VIO_D2_MARK, PORT132_FN1),
+	PINMUX_DATA(PORT132_KEYOUT4_MARK, PORT132_FN2),
+	PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3),
+	PINMUX_DATA(VIO_D3_MARK, PORT133_FN1),
+	PINMUX_DATA(PORT133_KEYOUT5_MARK, PORT133_FN2),
+	PINMUX_DATA(PORT133_MSIOF2_TSYNC_MARK, PORT133_FN3),
+	PINMUX_DATA(VIO_D4_MARK, PORT134_FN1),
+	PINMUX_DATA(PORT134_KEYIN0_MARK, PORT134_FN2),
+	PINMUX_DATA(PORT134_MSIOF2_TXD_MARK, PORT134_FN3),
+	PINMUX_DATA(VIO_D5_MARK, PORT135_FN1),
+	PINMUX_DATA(PORT135_KEYIN1_MARK, PORT135_FN2),
+	PINMUX_DATA(PORT135_MSIOF2_TSCK_MARK, PORT135_FN3),
+	PINMUX_DATA(VIO_D6_MARK, PORT136_FN1),
+	PINMUX_DATA(PORT136_KEYIN2_MARK, PORT136_FN2),
+	PINMUX_DATA(VIO_D7_MARK, PORT137_FN1),
+	PINMUX_DATA(PORT137_KEYIN3_MARK, PORT137_FN2),
+	PINMUX_DATA(VIO_D8_MARK, PORT138_FN1),
+	PINMUX_DATA(M9_SLCD_A01_MARK, PORT138_FN2),
+	PINMUX_DATA(PORT138_FSIAOMC_MARK, PORT138_FN3),
+	PINMUX_DATA(VIO_D9_MARK, PORT139_FN1),
+	PINMUX_DATA(M10_SLCD_CK1_MARK, PORT139_FN2),
+	PINMUX_DATA(PORT139_FSIAOLR_MARK, PORT139_FN3),
+	PINMUX_DATA(VIO_D10_MARK, PORT140_FN1),
+	PINMUX_DATA(M11_SLCD_SO1_MARK, PORT140_FN2),
+	PINMUX_DATA(TPU0TO2_MARK, PORT140_FN3),
+	PINMUX_DATA(PORT140_FSIAOBT_MARK, PORT140_FN4),
+	PINMUX_DATA(VIO_D11_MARK, PORT141_FN1),
+	PINMUX_DATA(M12_SLCD_CE1_MARK, PORT141_FN2),
+	PINMUX_DATA(TPU0TO3_MARK, PORT141_FN3),
+	PINMUX_DATA(PORT141_FSIAOSLD_MARK, PORT141_FN4),
+	PINMUX_DATA(VIO_D12_MARK, PORT142_FN1),
+	PINMUX_DATA(M13_BSW_MARK, PORT142_FN2),
+	PINMUX_DATA(PORT142_FSIACK_MARK, PORT142_FN3),
+	PINMUX_DATA(VIO_D13_MARK, PORT143_FN1),
+	PINMUX_DATA(M14_GSW_MARK, PORT143_FN2),
+	PINMUX_DATA(PORT143_FSIAILR_MARK, PORT143_FN3),
+	PINMUX_DATA(VIO_D14_MARK, PORT144_FN1),
+	PINMUX_DATA(M15_RSW_MARK, PORT144_FN2),
+	PINMUX_DATA(PORT144_FSIAIBT_MARK, PORT144_FN3),
+	PINMUX_DATA(VIO_D15_MARK, PORT145_FN1),
+	PINMUX_DATA(TPU1TO3_MARK, PORT145_FN2),
+	PINMUX_DATA(PORT145_FSIAISLD_MARK, PORT145_FN3),
+	PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1),
+	PINMUX_DATA(PORT146_KEYIN4_MARK, PORT146_FN2),
+	PINMUX_DATA(IPORT2_MARK, PORT146_FN3),
+	PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1),
+	PINMUX_DATA(PORT147_KEYIN5_MARK, PORT147_FN2),
+	PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1),
+	PINMUX_DATA(PORT148_KEYIN6_MARK, PORT148_FN2),
+	PINMUX_DATA(A27_MARK, PORT149_FN1),
+	PINMUX_DATA(RDWR_XWE_MARK, PORT149_FN2),
+	PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3),
+	PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN1),
+	PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN1),
+	PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN2),
+	PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN1),
+	PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN2),
+	PINMUX_DATA(TPU1TO2_MARK, PORT153_FN1),
+	PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN2),
+	PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN3),
+	PINMUX_DATA(SOUT3_MARK, PORT154_FN1),
+	PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2),
+	PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN3),
+	PINMUX_DATA(SIN3_MARK, PORT155_FN1),
+	PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2),
+	PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN3),
+	PINMUX_DATA(XRTS3_MARK, PORT156_FN1),
+	PINMUX_DATA(SCIFA2_RTS1_MARK, PORT156_FN2),
+	PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN3),
+	PINMUX_DATA(XCTS3_MARK, PORT157_FN1),
+	PINMUX_DATA(SCIFA2_CTS1_MARK, PORT157_FN2),
+	PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN3),
+
+	/* 55-4 (FN) */
+	PINMUX_DATA(DINT_MARK, PORT158_FN1),
+	PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2),
+	PINMUX_DATA(TS_SCK3_MARK, PORT158_FN3),
+	PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1),
+	PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2),
+	PINMUX_DATA(NMI_MARK, PORT159_FN3),
+	PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1),
+	PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2),
+	PINMUX_DATA(SOUT0_MARK, PORT160_FN3),
+	PINMUX_DATA(PORT161_SCIFB_CTS_MARK, PORT161_FN1),
+	PINMUX_DATA(PORT161_SCIFA5_CTS_MARK, PORT161_FN2),
+	PINMUX_DATA(XCTS0_MARK, PORT161_FN3),
+	PINMUX_DATA(MFG3_IN2_MARK, PORT161_FN4),
+	PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1),
+	PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2),
+	PINMUX_DATA(SIN0_MARK, PORT162_FN3),
+	PINMUX_DATA(MFG3_IN1_MARK, PORT162_FN4),
+	PINMUX_DATA(PORT163_SCIFB_RTS_MARK, PORT163_FN1),
+	PINMUX_DATA(PORT163_SCIFA5_RTS_MARK, PORT163_FN2),
+	PINMUX_DATA(XRTS0_MARK, PORT163_FN3),
+	PINMUX_DATA(MFG3_OUT1_MARK, PORT163_FN4),
+	PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5),
+	PINMUX_DATA(LCDD0_MARK, PORT192_FN1),
+	PINMUX_DATA(PORT192_KEYOUT0_MARK, PORT192_FN2),
+	PINMUX_DATA(EXT_CKI_MARK, PORT192_FN3),
+	PINMUX_DATA(LCDD1_MARK, PORT193_FN1),
+	PINMUX_DATA(PORT193_KEYOUT1_MARK, PORT193_FN2),
+	PINMUX_DATA(PORT193_SCIFA5_CTS_MARK, PORT193_FN3),
+	PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN4),
+	PINMUX_DATA(LCDD2_MARK, PORT194_FN1),
+	PINMUX_DATA(PORT194_KEYOUT2_MARK, PORT194_FN2),
+	PINMUX_DATA(PORT194_SCIFA5_RTS_MARK, PORT194_FN3),
+	PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN4),
+	PINMUX_DATA(LCDD3_MARK, PORT195_FN1),
+	PINMUX_DATA(PORT195_KEYOUT3_MARK, PORT195_FN2),
+	PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3),
+	PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN4),
+	PINMUX_DATA(LCDD4_MARK, PORT196_FN1),
+	PINMUX_DATA(PORT196_KEYOUT4_MARK, PORT196_FN2),
+	PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3),
+	PINMUX_DATA(LCDD5_MARK, PORT197_FN1),
+	PINMUX_DATA(PORT197_KEYOUT5_MARK, PORT197_FN2),
+	PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3),
+	PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN4),
+	PINMUX_DATA(LCDD6_MARK, PORT198_FN1),
+	PINMUX_DATA(LCDD7_MARK, PORT199_FN1),
+	PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2),
+	PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN3),
+	PINMUX_DATA(LCDD8_MARK, PORT200_FN1),
+	PINMUX_DATA(PORT200_KEYIN0_MARK, PORT200_FN2),
+	PINMUX_DATA(VIO_DR0_MARK, PORT200_FN3),
+	PINMUX_DATA(D16_MARK, PORT200_FN4),
+	PINMUX_DATA(LCDD9_MARK, PORT201_FN1),
+	PINMUX_DATA(PORT201_KEYIN1_MARK, PORT201_FN2),
+	PINMUX_DATA(VIO_DR1_MARK, PORT201_FN3),
+	PINMUX_DATA(D17_MARK, PORT201_FN4),
+	PINMUX_DATA(LCDD10_MARK, PORT202_FN1),
+	PINMUX_DATA(PORT202_KEYIN2_MARK, PORT202_FN2),
+	PINMUX_DATA(VIO_DR2_MARK, PORT202_FN3),
+	PINMUX_DATA(D18_MARK, PORT202_FN4),
+	PINMUX_DATA(LCDD11_MARK, PORT203_FN1),
+	PINMUX_DATA(PORT203_KEYIN3_MARK, PORT203_FN2),
+	PINMUX_DATA(VIO_DR3_MARK, PORT203_FN3),
+	PINMUX_DATA(D19_MARK, PORT203_FN4),
+	PINMUX_DATA(LCDD12_MARK, PORT204_FN1),
+	PINMUX_DATA(PORT204_KEYIN4_MARK, PORT204_FN2),
+	PINMUX_DATA(VIO_DR4_MARK, PORT204_FN3),
+	PINMUX_DATA(D20_MARK, PORT204_FN4),
+	PINMUX_DATA(LCDD13_MARK, PORT205_FN1),
+	PINMUX_DATA(PORT205_KEYIN5_MARK, PORT205_FN2),
+	PINMUX_DATA(VIO_DR5_MARK, PORT205_FN3),
+	PINMUX_DATA(D21_MARK, PORT205_FN4),
+	PINMUX_DATA(LCDD14_MARK, PORT206_FN1),
+	PINMUX_DATA(PORT206_KEYIN6_MARK, PORT206_FN2),
+	PINMUX_DATA(VIO_DR6_MARK, PORT206_FN3),
+	PINMUX_DATA(D22_MARK, PORT206_FN4),
+	PINMUX_DATA(LCDD15_MARK, PORT207_FN1),
+	PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2),
+	PINMUX_DATA(PORT207_KEYOUT0_MARK, PORT207_FN3),
+	PINMUX_DATA(VIO_DR7_MARK, PORT207_FN4),
+	PINMUX_DATA(D23_MARK, PORT207_FN5),
+	PINMUX_DATA(LCDD16_MARK, PORT208_FN1),
+	PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2),
+	PINMUX_DATA(PORT208_KEYOUT1_MARK, PORT208_FN3),
+	PINMUX_DATA(VIO_VDR_MARK, PORT208_FN4),
+	PINMUX_DATA(D24_MARK, PORT208_FN5),
+	PINMUX_DATA(LCDD17_MARK, PORT209_FN1),
+	PINMUX_DATA(PORT209_KEYOUT2_MARK, PORT209_FN2),
+	PINMUX_DATA(VIO_HDR_MARK, PORT209_FN3),
+	PINMUX_DATA(D25_MARK, PORT209_FN4),
+	PINMUX_DATA(LCDD18_MARK, PORT210_FN1),
+	PINMUX_DATA(DREQ2_MARK, PORT210_FN2),
+	PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN3),
+	PINMUX_DATA(D26_MARK, PORT210_FN4),
+	PINMUX_DATA(LCDD19_MARK, PORT211_FN1),
+	PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN2),
+	PINMUX_DATA(D27_MARK, PORT211_FN3),
+	PINMUX_DATA(LCDD20_MARK, PORT212_FN1),
+	PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2),
+	PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN3),
+	PINMUX_DATA(D28_MARK, PORT212_FN4),
+	PINMUX_DATA(LCDD21_MARK, PORT213_FN1),
+	PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2),
+	PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN3),
+	PINMUX_DATA(D29_MARK, PORT213_FN4),
+	PINMUX_DATA(LCDD22_MARK, PORT214_FN1),
+	PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2),
+	PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN3),
+	PINMUX_DATA(D30_MARK, PORT214_FN4),
+	PINMUX_DATA(LCDD23_MARK, PORT215_FN1),
+	PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2),
+	PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN3),
+	PINMUX_DATA(D31_MARK, PORT215_FN4),
+	PINMUX_DATA(LCDDCK_MARK, PORT216_FN1),
+	PINMUX_DATA(LCDWR_MARK, PORT216_FN2),
+	PINMUX_DATA(PORT216_KEYOUT3_MARK, PORT216_FN3),
+	PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN4),
+	PINMUX_DATA(LCDRD_MARK, PORT217_FN1),
+	PINMUX_DATA(DACK2_MARK, PORT217_FN2),
+	PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN3),
+	PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1),
+	PINMUX_DATA(LCDCS_MARK, PORT218_FN2),
+	PINMUX_DATA(LCDCS2_MARK, PORT218_FN3),
+	PINMUX_DATA(DACK3_MARK, PORT218_FN4),
+	PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5),
+	PINMUX_DATA(PORT218_KEYOUT4_MARK, PORT218_FN6),
+	PINMUX_DATA(LCDDISP_MARK, PORT219_FN1),
+	PINMUX_DATA(LCDRS_MARK, PORT219_FN2),
+	PINMUX_DATA(DREQ3_MARK, PORT219_FN3),
+	PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN4),
+	PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1),
+	PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2),
+	PINMUX_DATA(PORT220_KEYOUT5_MARK, PORT220_FN3),
+	PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1),
+	PINMUX_DATA(DREQ1_MARK, PORT221_FN2),
+	PINMUX_DATA(PWEN_MARK, PORT221_FN3),
+	PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN4),
+	PINMUX_DATA(LCDDON_MARK, PORT222_FN1),
+	PINMUX_DATA(LCDDON2_MARK, PORT222_FN2),
+	PINMUX_DATA(DACK1_MARK, PORT222_FN3),
+	PINMUX_DATA(OVCN_MARK, PORT222_FN4),
+	PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5),
+	PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN1),
+	PINMUX_DATA(OVCN2_MARK, PORT225_FN2),
+	PINMUX_DATA(EXTLP_MARK, PORT226_FN1),
+	PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2),
+	PINMUX_DATA(USBTERM_MARK, PORT226_FN3),
+	PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN4),
+	PINMUX_DATA(SCIFA1_RTS_MARK, PORT227_FN1),
+	PINMUX_DATA(IDIN_MARK, PORT227_FN2),
+	PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN1),
+	PINMUX_DATA(SCIFA1_CTS_MARK, PORT229_FN1),
+	PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN2),
+	PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1),
+	PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2),
+	PINMUX_DATA(PORT230_FSIAOMC_MARK, PORT230_FN3),
+	PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1),
+	PINMUX_DATA(SCIFA2_CTS2_MARK, PORT231_FN2),
+	PINMUX_DATA(PORT231_FSIAOLR_MARK, PORT231_FN3),
+	PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1),
+	PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2),
+	PINMUX_DATA(PORT232_FSIAOBT_MARK, PORT232_FN3),
+	PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1),
+	PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2),
+	PINMUX_DATA(GPS_VCOTRIG_MARK, PORT233_FN3),
+	PINMUX_DATA(PORT233_FSIACK_MARK, PORT233_FN4),
+	PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1),
+	PINMUX_DATA(SCIFA2_RTS2_MARK, PORT234_FN2),
+	PINMUX_DATA(PORT234_FSIAOSLD_MARK, PORT234_FN3),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1),
+	PINMUX_DATA(OPORT0_MARK, PORT235_FN2),
+	PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3),
+	PINMUX_DATA(PORT235_FSIAILR_MARK, PORT235_FN4),
+	PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1),
+	PINMUX_DATA(I2C_SDA2_MARK, PORT236_FN2),
+	PINMUX_DATA(PORT236_FSIAIBT_MARK, PORT236_FN3),
+	PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1),
+	PINMUX_DATA(I2C_SCL2_MARK, PORT237_FN2),
+	PINMUX_DATA(PORT237_FSIAISLD_MARK, PORT237_FN3),
+	PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1),
+	PINMUX_DATA(EDBGREQ3_MARK, PORT238_FN2),
+
+	/* 55-5 (FN) */
+	PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1),
+	PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1),
+	PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1),
+	PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2),
+	PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3),
+	PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4),
+	PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1),
+	PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN2),
+	PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1),
+	PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2),
+	PINMUX_DATA(PORT244_SCIFA5_CTS_MARK, PORT244_FN1),
+	PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2),
+	PINMUX_DATA(PORT244_SCIFB_CTS_MARK, PORT244_FN3),
+	PINMUX_DATA(PORT245_SCIFA5_RTS_MARK, PORT245_FN1),
+	PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2),
+	PINMUX_DATA(PORT245_SCIFB_RTS_MARK, PORT245_FN3),
+	PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1),
+	PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2),
+	PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3),
+	PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4),
+	PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1),
+	PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2),
+	PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3),
+	PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4),
+	PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1),
+	PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2),
+	PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3),
+	PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4),
+	PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1),
+	PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2),
+	PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1),
+	PINMUX_DATA(TCK2_SWCLK_MC0_MARK, PORT250_FN2),
+	PINMUX_DATA(SDHICD0_MARK, PORT251_FN1),
+	PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1),
+	PINMUX_DATA(TMS2_SWDIO_MC0_MARK, PORT252_FN2),
+	PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1),
+	PINMUX_DATA(TDO2_SWO0_MC0_MARK, PORT253_FN2),
+	PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1),
+	PINMUX_DATA(TDI2_MARK, PORT254_FN2),
+	PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1),
+	PINMUX_DATA(RTCK2_SWO1_MC0_MARK, PORT255_FN2),
+	PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1),
+	PINMUX_DATA(TRST2_MARK, PORT256_FN2),
+	PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1),
+	PINMUX_DATA(EDBGREQ2_MARK, PORT257_FN2),
+	PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1),
+	PINMUX_DATA(TCK3_SWCLK_MC1_MARK, PORT258_FN2),
+	PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1),
+	PINMUX_DATA(M11_SLCD_SO2_MARK, PORT259_FN2),
+	PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3),
+	PINMUX_DATA(TMS3_SWDIO_MC1_MARK, PORT259_FN4),
+	PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1),
+	PINMUX_DATA(M9_SLCD_A02_MARK, PORT260_FN2),
+	PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3),
+	PINMUX_DATA(TDO3_SWO0_MC1_MARK, PORT260_FN4),
+	PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1),
+	PINMUX_DATA(M10_SLCD_CK2_MARK, PORT261_FN2),
+	PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3),
+	PINMUX_DATA(TDI3_MARK, PORT261_FN4),
+	PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1),
+	PINMUX_DATA(M12_SLCD_CE2_MARK, PORT262_FN2),
+	PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3),
+	PINMUX_DATA(RTCK3_SWO1_MC1_MARK, PORT262_FN4),
+	PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1),
+	PINMUX_DATA(TRST3_MARK, PORT263_FN2),
+	PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_265() _265(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* 55-1 -> 55-5 (GPIO) */
+	GPIO_PORT_265(),
+
+	/* Special Pull-up / Pull-down Functions */
+	GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
+	GPIO_FN(PORT68_KEYIN2_PU), GPIO_FN(PORT69_KEYIN3_PU),
+	GPIO_FN(PORT70_KEYIN4_PU), GPIO_FN(PORT71_KEYIN5_PU),
+	GPIO_FN(PORT72_KEYIN6_PU),
+
+	/* 55-1 (FN) */
+	GPIO_FN(VBUS_0),
+	GPIO_FN(CPORT0),
+	GPIO_FN(CPORT1),
+	GPIO_FN(CPORT2),
+	GPIO_FN(CPORT3),
+	GPIO_FN(CPORT4),
+	GPIO_FN(CPORT5),
+	GPIO_FN(CPORT6),
+	GPIO_FN(CPORT7),
+	GPIO_FN(CPORT8),
+	GPIO_FN(CPORT9),
+	GPIO_FN(CPORT10),
+	GPIO_FN(CPORT11), GPIO_FN(SIN2),
+	GPIO_FN(CPORT12), GPIO_FN(XCTS2),
+	GPIO_FN(CPORT13), GPIO_FN(RFSPO4),
+	GPIO_FN(CPORT14), GPIO_FN(RFSPO5),
+	GPIO_FN(CPORT15), GPIO_FN(SCIFA0_SCK), GPIO_FN(GPS_AGC2),
+	GPIO_FN(CPORT16), GPIO_FN(SCIFA0_TXD), GPIO_FN(GPS_AGC3),
+	GPIO_FN(CPORT17_IC_OE), GPIO_FN(SOUT2),
+	GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(PORT19_VIO_CKO2),
+	GPIO_FN(CPORT19_MPORT1),
+	GPIO_FN(CPORT20), GPIO_FN(RFSPO6),
+	GPIO_FN(CPORT21), GPIO_FN(STATUS0),
+	GPIO_FN(CPORT22), GPIO_FN(STATUS1),
+	GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7),
+	GPIO_FN(B_SYNLD1),
+	GPIO_FN(B_SYNLD2), GPIO_FN(SYSENMSK),
+	GPIO_FN(XMAINPS),
+	GPIO_FN(XDIVPS),
+	GPIO_FN(XIDRST),
+	GPIO_FN(IDCLK), GPIO_FN(IC_DP),
+	GPIO_FN(IDIO), GPIO_FN(IC_DM),
+	GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), GPIO_FN(M02_BERDAT),
+	GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP),
+	GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK),
+	GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS),
+	GPIO_FN(PCMCLKO),
+	GPIO_FN(SYNC8KO),
+
+	/* 55-2 (FN) */
+	GPIO_FN(DNPCM_A),
+	GPIO_FN(UPPCM_A),
+	GPIO_FN(VACK),
+	GPIO_FN(XTALB1L),
+	GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS),
+	GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD),
+	GPIO_FN(GPS_PWRDOWN), GPIO_FN(SCIFA0_CTS),
+	GPIO_FN(GPS_IM),
+	GPIO_FN(GPS_IS),
+	GPIO_FN(GPS_QM),
+	GPIO_FN(GPS_QS),
+	GPIO_FN(FMSOCK), GPIO_FN(PORT49_IRDA_OUT), GPIO_FN(PORT49_IROUT),
+	GPIO_FN(FMSOOLR), GPIO_FN(BBIF2_TSYNC2), GPIO_FN(TPU2TO2),
+	GPIO_FN(IPORT3), GPIO_FN(FMSIOLR),
+	GPIO_FN(FMSOOBT), GPIO_FN(BBIF2_TSCK2), GPIO_FN(TPU2TO3),
+	GPIO_FN(OPORT1), GPIO_FN(FMSIOBT),
+	GPIO_FN(FMSOSLD), GPIO_FN(BBIF2_TXD2), GPIO_FN(OPORT2),
+	GPIO_FN(FMSOILR), GPIO_FN(PORT53_IRDA_IN), GPIO_FN(TPU3TO3),
+	GPIO_FN(OPORT3), GPIO_FN(FMSIILR),
+	GPIO_FN(FMSOIBT), GPIO_FN(PORT54_IRDA_FIRSEL), GPIO_FN(TPU3TO2),
+	GPIO_FN(FMSIIBT),
+	GPIO_FN(FMSISLD), GPIO_FN(MFG0_OUT1), GPIO_FN(TPU0TO0),
+	GPIO_FN(A0_EA0), GPIO_FN(BS),
+	GPIO_FN(A12_EA12), GPIO_FN(PORT58_VIO_CKOR), GPIO_FN(TPU4TO2),
+	GPIO_FN(A13_EA13), GPIO_FN(PORT59_IROUT), GPIO_FN(MFG0_OUT2),
+	GPIO_FN(TPU0TO1),
+	GPIO_FN(A14_EA14), GPIO_FN(PORT60_KEYOUT5),
+	GPIO_FN(A15_EA15), GPIO_FN(PORT61_KEYOUT4),
+	GPIO_FN(A16_EA16), GPIO_FN(PORT62_KEYOUT3), GPIO_FN(MSIOF0_SS1),
+	GPIO_FN(A17_EA17), GPIO_FN(PORT63_KEYOUT2), GPIO_FN(MSIOF0_TSYNC),
+	GPIO_FN(A18_EA18), GPIO_FN(PORT64_KEYOUT1), GPIO_FN(MSIOF0_TSCK),
+	GPIO_FN(A19_EA19), GPIO_FN(PORT65_KEYOUT0), GPIO_FN(MSIOF0_TXD),
+	GPIO_FN(A20_EA20), GPIO_FN(PORT66_KEYIN0), GPIO_FN(MSIOF0_RSCK),
+	GPIO_FN(A21_EA21), GPIO_FN(PORT67_KEYIN1), GPIO_FN(MSIOF0_RSYNC),
+	GPIO_FN(A22_EA22), GPIO_FN(PORT68_KEYIN2), GPIO_FN(MSIOF0_MCK0),
+	GPIO_FN(A23_EA23), GPIO_FN(PORT69_KEYIN3), GPIO_FN(MSIOF0_MCK1),
+	GPIO_FN(A24_EA24), GPIO_FN(PORT70_KEYIN4), GPIO_FN(MSIOF0_RXD),
+	GPIO_FN(A25_EA25), GPIO_FN(PORT71_KEYIN5), GPIO_FN(MSIOF0_SS2),
+	GPIO_FN(A26), GPIO_FN(PORT72_KEYIN6),
+	GPIO_FN(D0_ED0_NAF0),
+	GPIO_FN(D1_ED1_NAF1),
+	GPIO_FN(D2_ED2_NAF2),
+	GPIO_FN(D3_ED3_NAF3),
+	GPIO_FN(D4_ED4_NAF4),
+	GPIO_FN(D5_ED5_NAF5),
+	GPIO_FN(D6_ED6_NAF6),
+	GPIO_FN(D7_ED7_NAF7),
+	GPIO_FN(D8_ED8_NAF8),
+	GPIO_FN(D9_ED9_NAF9),
+	GPIO_FN(D10_ED10_NAF10),
+	GPIO_FN(D11_ED11_NAF11),
+	GPIO_FN(D12_ED12_NAF12),
+	GPIO_FN(D13_ED13_NAF13),
+	GPIO_FN(D14_ED14_NAF14),
+	GPIO_FN(D15_ED15_NAF15),
+	GPIO_FN(CS4),
+	GPIO_FN(CS5A), GPIO_FN(FMSICK),
+
+	/* 55-3 (FN) */
+	GPIO_FN(CS5B), GPIO_FN(FCE1),
+	GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(CS6A), GPIO_FN(DACK0),
+	GPIO_FN(FCE0),
+	GPIO_FN(WAIT), GPIO_FN(DREQ0),
+	GPIO_FN(RD_XRD),
+	GPIO_FN(WE0_XWR0_FWE),
+	GPIO_FN(WE1_XWR1),
+	GPIO_FN(FRB),
+	GPIO_FN(CKO),
+	GPIO_FN(NBRSTOUT),
+	GPIO_FN(NBRST),
+	GPIO_FN(GPS_EPPSIN),
+	GPIO_FN(LATCHPULSE),
+	GPIO_FN(LTESIGNAL),
+	GPIO_FN(LEGACYSTATE),
+	GPIO_FN(TCKON),
+	GPIO_FN(VIO_VD), GPIO_FN(PORT128_KEYOUT0), GPIO_FN(IPORT0),
+	GPIO_FN(VIO_HD), GPIO_FN(PORT129_KEYOUT1), GPIO_FN(IPORT1),
+	GPIO_FN(VIO_D0), GPIO_FN(PORT130_KEYOUT2), GPIO_FN(PORT130_MSIOF2_RXD),
+	GPIO_FN(VIO_D1), GPIO_FN(PORT131_KEYOUT3), GPIO_FN(PORT131_MSIOF2_SS1),
+	GPIO_FN(VIO_D2), GPIO_FN(PORT132_KEYOUT4), GPIO_FN(PORT132_MSIOF2_SS2),
+	GPIO_FN(VIO_D3), GPIO_FN(PORT133_KEYOUT5),
+	GPIO_FN(PORT133_MSIOF2_TSYNC),
+	GPIO_FN(VIO_D4), GPIO_FN(PORT134_KEYIN0), GPIO_FN(PORT134_MSIOF2_TXD),
+	GPIO_FN(VIO_D5), GPIO_FN(PORT135_KEYIN1), GPIO_FN(PORT135_MSIOF2_TSCK),
+	GPIO_FN(VIO_D6), GPIO_FN(PORT136_KEYIN2),
+	GPIO_FN(VIO_D7), GPIO_FN(PORT137_KEYIN3),
+	GPIO_FN(VIO_D8), GPIO_FN(M9_SLCD_A01), GPIO_FN(PORT138_FSIAOMC),
+	GPIO_FN(VIO_D9), GPIO_FN(M10_SLCD_CK1), GPIO_FN(PORT139_FSIAOLR),
+	GPIO_FN(VIO_D10), GPIO_FN(M11_SLCD_SO1), GPIO_FN(TPU0TO2),
+	GPIO_FN(PORT140_FSIAOBT),
+	GPIO_FN(VIO_D11), GPIO_FN(M12_SLCD_CE1), GPIO_FN(TPU0TO3),
+	GPIO_FN(PORT141_FSIAOSLD),
+	GPIO_FN(VIO_D12), GPIO_FN(M13_BSW), GPIO_FN(PORT142_FSIACK),
+	GPIO_FN(VIO_D13), GPIO_FN(M14_GSW), GPIO_FN(PORT143_FSIAILR),
+	GPIO_FN(VIO_D14), GPIO_FN(M15_RSW), GPIO_FN(PORT144_FSIAIBT),
+	GPIO_FN(VIO_D15), GPIO_FN(TPU1TO3), GPIO_FN(PORT145_FSIAISLD),
+	GPIO_FN(VIO_CLK), GPIO_FN(PORT146_KEYIN4), GPIO_FN(IPORT2),
+	GPIO_FN(VIO_FIELD), GPIO_FN(PORT147_KEYIN5),
+	GPIO_FN(VIO_CKO), GPIO_FN(PORT148_KEYIN6),
+	GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(MFG0_IN1),
+	GPIO_FN(MFG0_IN2),
+	GPIO_FN(TS_SPSYNC3), GPIO_FN(MSIOF2_RSCK),
+	GPIO_FN(TS_SDAT3), GPIO_FN(MSIOF2_RSYNC),
+	GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT153_MSIOF2_SS1),
+	GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), GPIO_FN(MSIOF2_MCK0),
+	GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), GPIO_FN(MSIOF2_MCK1),
+	GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT156_MSIOF2_SS2),
+	GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT157_MSIOF2_RXD),
+
+	/* 55-4 (FN) */
+	GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3),
+	GPIO_FN(PORT159_SCIFB_SCK), GPIO_FN(PORT159_SCIFA5_SCK), GPIO_FN(NMI),
+	GPIO_FN(PORT160_SCIFB_TXD), GPIO_FN(PORT160_SCIFA5_TXD), GPIO_FN(SOUT0),
+	GPIO_FN(PORT161_SCIFB_CTS), GPIO_FN(PORT161_SCIFA5_CTS), GPIO_FN(XCTS0),
+	GPIO_FN(MFG3_IN2),
+	GPIO_FN(PORT162_SCIFB_RXD), GPIO_FN(PORT162_SCIFA5_RXD), GPIO_FN(SIN0),
+	GPIO_FN(MFG3_IN1),
+	GPIO_FN(PORT163_SCIFB_RTS), GPIO_FN(PORT163_SCIFA5_RTS), GPIO_FN(XRTS0),
+	GPIO_FN(MFG3_OUT1), GPIO_FN(TPU3TO0),
+	GPIO_FN(LCDD0), GPIO_FN(PORT192_KEYOUT0), GPIO_FN(EXT_CKI),
+	GPIO_FN(LCDD1), GPIO_FN(PORT193_KEYOUT1), GPIO_FN(PORT193_SCIFA5_CTS),
+	GPIO_FN(BBIF2_TSYNC1),
+	GPIO_FN(LCDD2), GPIO_FN(PORT194_KEYOUT2), GPIO_FN(PORT194_SCIFA5_RTS),
+	GPIO_FN(BBIF2_TSCK1),
+	GPIO_FN(LCDD3), GPIO_FN(PORT195_KEYOUT3), GPIO_FN(PORT195_SCIFA5_RXD),
+	GPIO_FN(BBIF2_TXD1),
+	GPIO_FN(LCDD4), GPIO_FN(PORT196_KEYOUT4), GPIO_FN(PORT196_SCIFA5_TXD),
+	GPIO_FN(LCDD5), GPIO_FN(PORT197_KEYOUT5), GPIO_FN(PORT197_SCIFA5_SCK),
+	GPIO_FN(MFG2_OUT2),
+	GPIO_FN(LCDD6),
+	GPIO_FN(LCDD7), GPIO_FN(TPU4TO1), GPIO_FN(MFG4_OUT2),
+	GPIO_FN(LCDD8), GPIO_FN(PORT200_KEYIN0), GPIO_FN(VIO_DR0),
+	GPIO_FN(D16),
+	GPIO_FN(LCDD9), GPIO_FN(PORT201_KEYIN1), GPIO_FN(VIO_DR1),
+	GPIO_FN(D17),
+	GPIO_FN(LCDD10), GPIO_FN(PORT202_KEYIN2), GPIO_FN(VIO_DR2),
+	GPIO_FN(D18),
+	GPIO_FN(LCDD11), GPIO_FN(PORT203_KEYIN3), GPIO_FN(VIO_DR3),
+	GPIO_FN(D19),
+	GPIO_FN(LCDD12), GPIO_FN(PORT204_KEYIN4), GPIO_FN(VIO_DR4),
+	GPIO_FN(D20),
+	GPIO_FN(LCDD13), GPIO_FN(PORT205_KEYIN5), GPIO_FN(VIO_DR5),
+	GPIO_FN(D21),
+	GPIO_FN(LCDD14), GPIO_FN(PORT206_KEYIN6), GPIO_FN(VIO_DR6),
+	GPIO_FN(D22),
+	GPIO_FN(LCDD15), GPIO_FN(PORT207_MSIOF0L_SS1), GPIO_FN(PORT207_KEYOUT0),
+	GPIO_FN(VIO_DR7), GPIO_FN(D23),
+	GPIO_FN(LCDD16), GPIO_FN(PORT208_MSIOF0L_SS2), GPIO_FN(PORT208_KEYOUT1),
+	GPIO_FN(VIO_VDR), GPIO_FN(D24),
+	GPIO_FN(LCDD17), GPIO_FN(PORT209_KEYOUT2), GPIO_FN(VIO_HDR),
+	GPIO_FN(D25),
+	GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(PORT210_MSIOF0L_SS1),
+	GPIO_FN(D26),
+	GPIO_FN(LCDD19), GPIO_FN(PORT211_MSIOF0L_SS2), GPIO_FN(D27),
+	GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0),
+	GPIO_FN(D28),
+	GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1),
+	GPIO_FN(D29),
+	GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_RSCK),
+	GPIO_FN(D30),
+	GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_RSYNC),
+	GPIO_FN(D31),
+	GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(PORT216_KEYOUT3),
+	GPIO_FN(VIO_CLKR),
+	GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_TSYNC),
+	GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3),
+	GPIO_FN(PORT218_VIO_CKOR), GPIO_FN(PORT218_KEYOUT4),
+	GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_TSCK),
+	GPIO_FN(LCDVSYN), GPIO_FN(LCDVSYN2), GPIO_FN(PORT220_KEYOUT5),
+	GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(PWEN), GPIO_FN(MSIOF0L_RXD),
+	GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(OVCN),
+	GPIO_FN(MSIOF0L_TXD),
+	GPIO_FN(SCIFA1_TXD), GPIO_FN(OVCN2),
+	GPIO_FN(EXTLP), GPIO_FN(SCIFA1_SCK), GPIO_FN(USBTERM),
+	GPIO_FN(PORT226_VIO_CKO2),
+	GPIO_FN(SCIFA1_RTS), GPIO_FN(IDIN),
+	GPIO_FN(SCIFA1_RXD),
+	GPIO_FN(SCIFA1_CTS), GPIO_FN(MFG1_IN1),
+	GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA2_TXD2), GPIO_FN(PORT230_FSIAOMC),
+	GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA2_CTS2), GPIO_FN(PORT231_FSIAOLR),
+	GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA2_SCK2), GPIO_FN(PORT232_FSIAOBT),
+	GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA2_RXD2), GPIO_FN(GPS_VCOTRIG),
+	GPIO_FN(PORT233_FSIACK),
+	GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA2_RTS2), GPIO_FN(PORT234_FSIAOSLD),
+	GPIO_FN(MSIOF1_RSYNC), GPIO_FN(OPORT0), GPIO_FN(MFG1_IN2),
+	GPIO_FN(PORT235_FSIAILR),
+	GPIO_FN(MSIOF1_MCK0), GPIO_FN(I2C_SDA2), GPIO_FN(PORT236_FSIAIBT),
+	GPIO_FN(MSIOF1_MCK1), GPIO_FN(I2C_SCL2), GPIO_FN(PORT237_FSIAISLD),
+	GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3),
+
+	/* 55-5 (FN) */
+	GPIO_FN(MSIOF1_SS2),
+	GPIO_FN(SCIFA6_TXD),
+	GPIO_FN(PORT241_IRDA_OUT), GPIO_FN(PORT241_IROUT), GPIO_FN(MFG4_OUT1),
+	GPIO_FN(TPU4TO0),
+	GPIO_FN(PORT242_IRDA_IN), GPIO_FN(MFG4_IN2),
+	GPIO_FN(PORT243_IRDA_FIRSEL), GPIO_FN(PORT243_VIO_CKO2),
+	GPIO_FN(PORT244_SCIFA5_CTS), GPIO_FN(MFG2_IN1),
+	GPIO_FN(PORT244_SCIFB_CTS),
+	GPIO_FN(PORT245_SCIFA5_RTS), GPIO_FN(MFG2_IN2),
+	GPIO_FN(PORT245_SCIFB_RTS),
+	GPIO_FN(PORT246_SCIFA5_RXD), GPIO_FN(MFG1_OUT1),
+	GPIO_FN(PORT246_SCIFB_RXD), GPIO_FN(TPU1TO0),
+	GPIO_FN(PORT247_SCIFA5_TXD), GPIO_FN(MFG3_OUT2),
+	GPIO_FN(PORT247_SCIFB_TXD), GPIO_FN(TPU3TO1),
+	GPIO_FN(PORT248_SCIFA5_SCK), GPIO_FN(MFG2_OUT1),
+	GPIO_FN(PORT248_SCIFB_SCK), GPIO_FN(TPU2TO0),
+	GPIO_FN(PORT249_IROUT), GPIO_FN(MFG4_IN1),
+	GPIO_FN(SDHICLK0), GPIO_FN(TCK2_SWCLK_MC0),
+	GPIO_FN(SDHICD0),
+	GPIO_FN(SDHID0_0), GPIO_FN(TMS2_SWDIO_MC0),
+	GPIO_FN(SDHID0_1), GPIO_FN(TDO2_SWO0_MC0),
+	GPIO_FN(SDHID0_2), GPIO_FN(TDI2),
+	GPIO_FN(SDHID0_3), GPIO_FN(RTCK2_SWO1_MC0),
+	GPIO_FN(SDHICMD0), GPIO_FN(TRST2),
+	GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2),
+	GPIO_FN(SDHICLK1), GPIO_FN(TCK3_SWCLK_MC1),
+	GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), GPIO_FN(TS_SPSYNC2),
+	GPIO_FN(TMS3_SWDIO_MC1),
+	GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_A02), GPIO_FN(TS_SDAT2),
+	GPIO_FN(TDO3_SWO0_MC1),
+	GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), GPIO_FN(TS_SDEN2),
+	GPIO_FN(TDI3),
+	GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), GPIO_FN(TS_SCK2),
+	GPIO_FN(RTCK3_SWO1_MC1),
+	GPIO_FN(SDHICMD1), GPIO_FN(TRST3),
+	GPIO_FN(RESETOUTS),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out)	\
+	0, (out), (in), 0,	\
+		0, 0, 0, 0,	\
+		0, 0, (in_pd), 0,	\
+		0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)	\
+	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {	\
+			PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,	\
+				 PORT##nr##_IN_PU, PORT##nr##_OUT),	\
+				PORT##nr##_FN0, PORT##nr##_FN1,	\
+				PORT##nr##_FN2, PORT##nr##_FN3,	\
+				PORT##nr##_FN4, PORT##nr##_FN5,	\
+				PORT##nr##_FN6, PORT##nr##_FN7 }	\
+	}
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	PORTCR(0, 0xe6050000), /* PORT0CR */
+	PORTCR(1, 0xe6050001), /* PORT1CR */
+	PORTCR(2, 0xe6050002), /* PORT2CR */
+	PORTCR(3, 0xe6050003), /* PORT3CR */
+	PORTCR(4, 0xe6050004), /* PORT4CR */
+	PORTCR(5, 0xe6050005), /* PORT5CR */
+	PORTCR(6, 0xe6050006), /* PORT6CR */
+	PORTCR(7, 0xe6050007), /* PORT7CR */
+	PORTCR(8, 0xe6050008), /* PORT8CR */
+	PORTCR(9, 0xe6050009), /* PORT9CR */
+
+	PORTCR(10, 0xe605000a), /* PORT10CR */
+	PORTCR(11, 0xe605000b), /* PORT11CR */
+	PORTCR(12, 0xe605000c), /* PORT12CR */
+	PORTCR(13, 0xe605000d), /* PORT13CR */
+	PORTCR(14, 0xe605000e), /* PORT14CR */
+	PORTCR(15, 0xe605000f), /* PORT15CR */
+	PORTCR(16, 0xe6050010), /* PORT16CR */
+	PORTCR(17, 0xe6050011), /* PORT17CR */
+	PORTCR(18, 0xe6050012), /* PORT18CR */
+	PORTCR(19, 0xe6050013), /* PORT19CR */
+
+	PORTCR(20, 0xe6050014), /* PORT20CR */
+	PORTCR(21, 0xe6050015), /* PORT21CR */
+	PORTCR(22, 0xe6050016), /* PORT22CR */
+	PORTCR(23, 0xe6050017), /* PORT23CR */
+	PORTCR(24, 0xe6050018), /* PORT24CR */
+	PORTCR(25, 0xe6050019), /* PORT25CR */
+	PORTCR(26, 0xe605001a), /* PORT26CR */
+	PORTCR(27, 0xe605001b), /* PORT27CR */
+	PORTCR(28, 0xe605001c), /* PORT28CR */
+	PORTCR(29, 0xe605001d), /* PORT29CR */
+
+	PORTCR(30, 0xe605001e), /* PORT30CR */
+	PORTCR(31, 0xe605001f), /* PORT31CR */
+	PORTCR(32, 0xe6050020), /* PORT32CR */
+	PORTCR(33, 0xe6050021), /* PORT33CR */
+	PORTCR(34, 0xe6050022), /* PORT34CR */
+	PORTCR(35, 0xe6050023), /* PORT35CR */
+	PORTCR(36, 0xe6050024), /* PORT36CR */
+	PORTCR(37, 0xe6050025), /* PORT37CR */
+	PORTCR(38, 0xe6050026), /* PORT38CR */
+	PORTCR(39, 0xe6050027), /* PORT39CR */
+
+	PORTCR(40, 0xe6050028), /* PORT40CR */
+	PORTCR(41, 0xe6050029), /* PORT41CR */
+	PORTCR(42, 0xe605002a), /* PORT42CR */
+	PORTCR(43, 0xe605002b), /* PORT43CR */
+	PORTCR(44, 0xe605002c), /* PORT44CR */
+	PORTCR(45, 0xe605002d), /* PORT45CR */
+	PORTCR(46, 0xe605002e), /* PORT46CR */
+	PORTCR(47, 0xe605002f), /* PORT47CR */
+	PORTCR(48, 0xe6050030), /* PORT48CR */
+	PORTCR(49, 0xe6050031), /* PORT49CR */
+
+	PORTCR(50, 0xe6050032), /* PORT50CR */
+	PORTCR(51, 0xe6050033), /* PORT51CR */
+	PORTCR(52, 0xe6050034), /* PORT52CR */
+	PORTCR(53, 0xe6050035), /* PORT53CR */
+	PORTCR(54, 0xe6050036), /* PORT54CR */
+	PORTCR(55, 0xe6050037), /* PORT55CR */
+	PORTCR(56, 0xe6050038), /* PORT56CR */
+	PORTCR(57, 0xe6050039), /* PORT57CR */
+	PORTCR(58, 0xe605003a), /* PORT58CR */
+	PORTCR(59, 0xe605003b), /* PORT59CR */
+
+	PORTCR(60, 0xe605003c), /* PORT60CR */
+	PORTCR(61, 0xe605003d), /* PORT61CR */
+	PORTCR(62, 0xe605003e), /* PORT62CR */
+	PORTCR(63, 0xe605003f), /* PORT63CR */
+	PORTCR(64, 0xe6050040), /* PORT64CR */
+	PORTCR(65, 0xe6050041), /* PORT65CR */
+	PORTCR(66, 0xe6050042), /* PORT66CR */
+	PORTCR(67, 0xe6050043), /* PORT67CR */
+	PORTCR(68, 0xe6050044), /* PORT68CR */
+	PORTCR(69, 0xe6050045), /* PORT69CR */
+
+	PORTCR(70, 0xe6050046), /* PORT70CR */
+	PORTCR(71, 0xe6050047), /* PORT71CR */
+	PORTCR(72, 0xe6050048), /* PORT72CR */
+	PORTCR(73, 0xe6050049), /* PORT73CR */
+	PORTCR(74, 0xe605004a), /* PORT74CR */
+	PORTCR(75, 0xe605004b), /* PORT75CR */
+	PORTCR(76, 0xe605004c), /* PORT76CR */
+	PORTCR(77, 0xe605004d), /* PORT77CR */
+	PORTCR(78, 0xe605004e), /* PORT78CR */
+	PORTCR(79, 0xe605004f), /* PORT79CR */
+
+	PORTCR(80, 0xe6050050), /* PORT80CR */
+	PORTCR(81, 0xe6050051), /* PORT81CR */
+	PORTCR(82, 0xe6050052), /* PORT82CR */
+	PORTCR(83, 0xe6050053), /* PORT83CR */
+	PORTCR(84, 0xe6050054), /* PORT84CR */
+	PORTCR(85, 0xe6050055), /* PORT85CR */
+	PORTCR(86, 0xe6050056), /* PORT86CR */
+	PORTCR(87, 0xe6050057), /* PORT87CR */
+	PORTCR(88, 0xe6050058), /* PORT88CR */
+	PORTCR(89, 0xe6050059), /* PORT89CR */
+
+	PORTCR(90, 0xe605005a), /* PORT90CR */
+	PORTCR(91, 0xe605005b), /* PORT91CR */
+	PORTCR(92, 0xe605005c), /* PORT92CR */
+	PORTCR(93, 0xe605005d), /* PORT93CR */
+	PORTCR(94, 0xe605005e), /* PORT94CR */
+	PORTCR(95, 0xe605005f), /* PORT95CR */
+	PORTCR(96, 0xe6050060), /* PORT96CR */
+	PORTCR(97, 0xe6050061), /* PORT97CR */
+	PORTCR(98, 0xe6050062), /* PORT98CR */
+	PORTCR(99, 0xe6050063), /* PORT99CR */
+
+	PORTCR(100, 0xe6050064), /* PORT100CR */
+	PORTCR(101, 0xe6050065), /* PORT101CR */
+	PORTCR(102, 0xe6050066), /* PORT102CR */
+	PORTCR(103, 0xe6050067), /* PORT103CR */
+	PORTCR(104, 0xe6050068), /* PORT104CR */
+	PORTCR(105, 0xe6050069), /* PORT105CR */
+	PORTCR(106, 0xe605006a), /* PORT106CR */
+	PORTCR(107, 0xe605006b), /* PORT107CR */
+	PORTCR(108, 0xe605006c), /* PORT108CR */
+	PORTCR(109, 0xe605006d), /* PORT109CR */
+
+	PORTCR(110, 0xe605006e), /* PORT110CR */
+	PORTCR(111, 0xe605006f), /* PORT111CR */
+	PORTCR(112, 0xe6050070), /* PORT112CR */
+	PORTCR(113, 0xe6050071), /* PORT113CR */
+	PORTCR(114, 0xe6050072), /* PORT114CR */
+	PORTCR(115, 0xe6050073), /* PORT115CR */
+	PORTCR(116, 0xe6050074), /* PORT116CR */
+	PORTCR(117, 0xe6050075), /* PORT117CR */
+	PORTCR(118, 0xe6050076), /* PORT118CR */
+
+	PORTCR(128, 0xe6051080), /* PORT128CR */
+	PORTCR(129, 0xe6051081), /* PORT129CR */
+
+	PORTCR(130, 0xe6051082), /* PORT130CR */
+	PORTCR(131, 0xe6051083), /* PORT131CR */
+	PORTCR(132, 0xe6051084), /* PORT132CR */
+	PORTCR(133, 0xe6051085), /* PORT133CR */
+	PORTCR(134, 0xe6051086), /* PORT134CR */
+	PORTCR(135, 0xe6051087), /* PORT135CR */
+	PORTCR(136, 0xe6051088), /* PORT136CR */
+	PORTCR(137, 0xe6051089), /* PORT137CR */
+	PORTCR(138, 0xe605108a), /* PORT138CR */
+	PORTCR(139, 0xe605108b), /* PORT139CR */
+
+	PORTCR(140, 0xe605108c), /* PORT140CR */
+	PORTCR(141, 0xe605108d), /* PORT141CR */
+	PORTCR(142, 0xe605108e), /* PORT142CR */
+	PORTCR(143, 0xe605108f), /* PORT143CR */
+	PORTCR(144, 0xe6051090), /* PORT144CR */
+	PORTCR(145, 0xe6051091), /* PORT145CR */
+	PORTCR(146, 0xe6051092), /* PORT146CR */
+	PORTCR(147, 0xe6051093), /* PORT147CR */
+	PORTCR(148, 0xe6051094), /* PORT148CR */
+	PORTCR(149, 0xe6051095), /* PORT149CR */
+
+	PORTCR(150, 0xe6051096), /* PORT150CR */
+	PORTCR(151, 0xe6051097), /* PORT151CR */
+	PORTCR(152, 0xe6051098), /* PORT152CR */
+	PORTCR(153, 0xe6051099), /* PORT153CR */
+	PORTCR(154, 0xe605109a), /* PORT154CR */
+	PORTCR(155, 0xe605109b), /* PORT155CR */
+	PORTCR(156, 0xe605109c), /* PORT156CR */
+	PORTCR(157, 0xe605109d), /* PORT157CR */
+	PORTCR(158, 0xe605109e), /* PORT158CR */
+	PORTCR(159, 0xe605109f), /* PORT159CR */
+
+	PORTCR(160, 0xe60510a0), /* PORT160CR */
+	PORTCR(161, 0xe60510a1), /* PORT161CR */
+	PORTCR(162, 0xe60510a2), /* PORT162CR */
+	PORTCR(163, 0xe60510a3), /* PORT163CR */
+	PORTCR(164, 0xe60510a4), /* PORT164CR */
+
+	PORTCR(192, 0xe60520c0), /* PORT192CR */
+	PORTCR(193, 0xe60520c1), /* PORT193CR */
+	PORTCR(194, 0xe60520c2), /* PORT194CR */
+	PORTCR(195, 0xe60520c3), /* PORT195CR */
+	PORTCR(196, 0xe60520c4), /* PORT196CR */
+	PORTCR(197, 0xe60520c5), /* PORT197CR */
+	PORTCR(198, 0xe60520c6), /* PORT198CR */
+	PORTCR(199, 0xe60520c7), /* PORT199CR */
+
+	PORTCR(200, 0xe60520c8), /* PORT200CR */
+	PORTCR(201, 0xe60520c9), /* PORT201CR */
+	PORTCR(202, 0xe60520ca), /* PORT202CR */
+	PORTCR(203, 0xe60520cb), /* PORT203CR */
+	PORTCR(204, 0xe60520cc), /* PORT204CR */
+	PORTCR(205, 0xe60520cd), /* PORT205CR */
+	PORTCR(206, 0xe60520ce), /* PORT206CR */
+	PORTCR(207, 0xe60520cf), /* PORT207CR */
+	PORTCR(208, 0xe60520d0), /* PORT208CR */
+	PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+	PORTCR(210, 0xe60520d2), /* PORT210CR */
+	PORTCR(211, 0xe60520d3), /* PORT211CR */
+	PORTCR(212, 0xe60520d4), /* PORT212CR */
+	PORTCR(213, 0xe60520d5), /* PORT213CR */
+	PORTCR(214, 0xe60520d6), /* PORT214CR */
+	PORTCR(215, 0xe60520d7), /* PORT215CR */
+	PORTCR(216, 0xe60520d8), /* PORT216CR */
+	PORTCR(217, 0xe60520d9), /* PORT217CR */
+	PORTCR(218, 0xe60520da), /* PORT218CR */
+	PORTCR(219, 0xe60520db), /* PORT219CR */
+
+	PORTCR(220, 0xe60520dc), /* PORT220CR */
+	PORTCR(221, 0xe60520dd), /* PORT221CR */
+	PORTCR(222, 0xe60520de), /* PORT222CR */
+	PORTCR(223, 0xe60520df), /* PORT223CR */
+	PORTCR(224, 0xe60520e0), /* PORT224CR */
+	PORTCR(225, 0xe60520e1), /* PORT225CR */
+	PORTCR(226, 0xe60520e2), /* PORT226CR */
+	PORTCR(227, 0xe60520e3), /* PORT227CR */
+	PORTCR(228, 0xe60520e4), /* PORT228CR */
+	PORTCR(229, 0xe60520e5), /* PORT229CR */
+
+	PORTCR(230, 0xe60520e6), /* PORT230CR */
+	PORTCR(231, 0xe60520e7), /* PORT231CR */
+	PORTCR(232, 0xe60520e8), /* PORT232CR */
+	PORTCR(233, 0xe60520e9), /* PORT233CR */
+	PORTCR(234, 0xe60520ea), /* PORT234CR */
+	PORTCR(235, 0xe60520eb), /* PORT235CR */
+	PORTCR(236, 0xe60520ec), /* PORT236CR */
+	PORTCR(237, 0xe60520ed), /* PORT237CR */
+	PORTCR(238, 0xe60520ee), /* PORT238CR */
+	PORTCR(239, 0xe60520ef), /* PORT239CR */
+
+	PORTCR(240, 0xe60520f0), /* PORT240CR */
+	PORTCR(241, 0xe60520f1), /* PORT241CR */
+	PORTCR(242, 0xe60520f2), /* PORT242CR */
+	PORTCR(243, 0xe60520f3), /* PORT243CR */
+	PORTCR(244, 0xe60520f4), /* PORT244CR */
+	PORTCR(245, 0xe60520f5), /* PORT245CR */
+	PORTCR(246, 0xe60520f6), /* PORT246CR */
+	PORTCR(247, 0xe60520f7), /* PORT247CR */
+	PORTCR(248, 0xe60520f8), /* PORT248CR */
+	PORTCR(249, 0xe60520f9), /* PORT249CR */
+
+	PORTCR(250, 0xe60520fa), /* PORT250CR */
+	PORTCR(251, 0xe60520fb), /* PORT251CR */
+	PORTCR(252, 0xe60520fc), /* PORT252CR */
+	PORTCR(253, 0xe60520fd), /* PORT253CR */
+	PORTCR(254, 0xe60520fe), /* PORT254CR */
+	PORTCR(255, 0xe60520ff), /* PORT255CR */
+	PORTCR(256, 0xe6052100), /* PORT256CR */
+	PORTCR(257, 0xe6052101), /* PORT257CR */
+	PORTCR(258, 0xe6052102), /* PORT258CR */
+	PORTCR(259, 0xe6052103), /* PORT259CR */
+
+	PORTCR(260, 0xe6052104), /* PORT260CR */
+	PORTCR(261, 0xe6052105), /* PORT261CR */
+	PORTCR(262, 0xe6052106), /* PORT262CR */
+	PORTCR(263, 0xe6052107), /* PORT263CR */
+	PORTCR(264, 0xe6052108), /* PORT264CR */
+
+	{ PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) {
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			MSELBCR_MSEL17_0, MSELBCR_MSEL17_1,
+			MSELBCR_MSEL16_0, MSELBCR_MSEL16_1,
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
+			PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+			PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+			PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+			PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+			PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+			PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+			PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+			PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) {
+			PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+			PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+			PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+			PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+			PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+			PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+			PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+			PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) {
+			PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+			PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+			PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+			PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+			PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+			PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+			PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+			PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD127_096DR", 0xe605400C, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+			PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+			PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+			PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+			PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+			PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD159_128DR", 0xe6055000, 32) {
+			PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+			PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+			PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+			PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+			PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+			PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+			PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+			PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR191_160DR", 0xe6055004, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, PORT164_DATA,
+			PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR223_192DR", 0xe6056000, 32) {
+			PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
+			PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
+			PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
+			PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
+			PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+			PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+			PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+			PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU255_224DR", 0xe6056004, 32) {
+			PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
+			PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
+			PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
+			PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
+			PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
+			PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
+			PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
+			PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU287_256DR", 0xe6056008, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, PORT264_DATA,
+			PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
+			PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7377_pinmux_info = {
+	.name = "sh7377_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PORT0,
+	.last_gpio = GPIO_FN_RESETOUTS,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7377_pinmux_init(void)
+{
+	register_pinmux(&sh7377_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
new file mode 100644
index 0000000..eca9071
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -0,0 +1,198 @@
+/*
+ * sh7367 processor support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.mapbase	= 0xe6c40000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs		= { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.mapbase	= 0xe6c50000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.mapbase	= 0xe6c60000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.mapbase	= 0xe6c70000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.mapbase	= 0xe6c80000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.mapbase	= 0xe6cb0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.mapbase	= 0xe6c30000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.clk = "r_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+	[0] = {
+		.name	= "CMT10",
+		.start	= 0xe6138010,
+		.end	= 0xe613801b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 72,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt10_device = {
+	.name		= "sh_cmt",
+	.id		= 10,
+	.dev = {
+		.platform_data	= &cmt10_platform_data,
+	},
+	.resource	= cmt10_resources,
+	.num_resources	= ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7367_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&cmt10_device,
+};
+
+void __init sh7367_add_standard_devices(void)
+{
+	platform_add_devices(sh7367_early_devices,
+			     ARRAY_SIZE(sh7367_early_devices));
+}
+
+#define SYMSTPCR2 0xe6158048
+#define SYMSTPCR2_CMT1 (1 << 29)
+
+void __init sh7367_add_early_devices(void)
+{
+	/* enable clock to CMT1 */
+	__raw_writel(__raw_readl(SYMSTPCR2) & ~SYMSTPCR2_CMT1, SYMSTPCR2);
+
+	early_platform_add_devices(sh7367_early_devices,
+				   ARRAY_SIZE(sh7367_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
new file mode 100644
index 0000000..1d11532
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -0,0 +1,199 @@
+/*
+ * sh7372 processor support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.mapbase	= 0xe6c40000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs		= { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.mapbase	= 0xe6c50000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.mapbase	= 0xe6c60000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.mapbase	= 0xe6c70000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.mapbase	= 0xe6c80000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.mapbase	= 0xe6cb0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.mapbase	= 0xe6c30000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.clk = "r_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+	[0] = {
+		.name	= "CMT10",
+		.start	= 0xe6138010,
+		.end	= 0xe613801b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 72,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt10_device = {
+	.name		= "sh_cmt",
+	.id		= 10,
+	.dev = {
+		.platform_data	= &cmt10_platform_data,
+	},
+	.resource	= cmt10_resources,
+	.num_resources	= ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7372_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&cmt10_device,
+};
+
+void __init sh7372_add_standard_devices(void)
+{
+	platform_add_devices(sh7372_early_devices,
+			    ARRAY_SIZE(sh7372_early_devices));
+}
+
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR3_CMT1 (1 << 29)
+
+void __init sh7372_add_early_devices(void)
+{
+	/* enable clock to CMT1 */
+	__raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
+
+	early_platform_add_devices(sh7372_early_devices,
+				   ARRAY_SIZE(sh7372_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c
new file mode 100644
index 0000000..60e3777
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7377.c
@@ -0,0 +1,215 @@
+/*
+ * sh7377 processor support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.mapbase	= 0xe6c40000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs		= { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.mapbase	= 0xe6c50000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.mapbase	= 0xe6c60000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.mapbase	= 0xe6c70000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.mapbase	= 0xe6c80000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.mapbase	= 0xe6cb0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.mapbase	= 0xe6cc0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 196, 196, 196, 196 },
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct plat_sci_port scif7_platform_data = {
+	.mapbase	= 0xe6c30000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif7_device = {
+	.name		= "sh-sci",
+	.id		= 7,
+	.dev		= {
+		.platform_data	= &scif7_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.clk = "r_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+	[0] = {
+		.name	= "CMT10",
+		.start	= 0xe6138010,
+		.end	= 0xe613801b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 72,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt10_device = {
+	.name		= "sh_cmt",
+	.id		= 10,
+	.dev = {
+		.platform_data	= &cmt10_platform_data,
+	},
+	.resource	= cmt10_resources,
+	.num_resources	= ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7377_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&scif7_device,
+	&cmt10_device,
+};
+
+void __init sh7377_add_standard_devices(void)
+{
+	platform_add_devices(sh7377_early_devices,
+			    ARRAY_SIZE(sh7377_early_devices));
+}
+
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR3_CMT1 (1 << 29)
+
+void __init sh7377_add_early_devices(void)
+{
+	/* enable clock to CMT1 */
+	__raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
+
+	early_platform_add_devices(sh7377_early_devices,
+				   ARRAY_SIZE(sh7377_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
new file mode 100644
index 0000000..895794b
--- /dev/null
+++ b/arch/arm/mach-shmobile/timer.c
@@ -0,0 +1,46 @@
+/*
+ * SH-Mobile Timer
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2002 - 2009  Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#include <linux/platform_device.h>
+#include <asm/mach/time.h>
+
+static void __init shmobile_late_time_init(void)
+{
+	/*
+	 * Make sure all compiled-in early timers register themselves.
+	 *
+	 * Run probe() for two "earlytimer" devices, these will be the
+	 * clockevents and clocksource devices respectively. In the event
+	 * that only a clockevents device is available, we -ENODEV on the
+	 * clocksource and the jiffies clocksource is used transparently
+	 * instead. No error handling is necessary here.
+	 */
+	early_platform_driver_register_all("earlytimer");
+	early_platform_driver_probe("earlytimer", 2, 0);
+}
+
+static void __init shmobile_timer_init(void)
+{
+	late_time_init = shmobile_late_time_init;
+}
+
+struct sys_timer shmobile_timer = {
+	.init		= shmobile_timer_init,
+};
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 01b5031..5f34eb6 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -358,7 +358,7 @@
 	/*
 	 * The AVE3e requires two regions of 256MB that it considers
 	 * "invisible". The hardware will not be able to access these
-	 * adresses, so they should never point to system RAM.
+	 * addresses, so they should never point to system RAM.
 	 */
 	{
 		.name  = "AVE3e Reserved 0",
@@ -1596,7 +1596,7 @@
 /*
  * Some devices and their resources require reserved physical memory from
  * the end of the available RAM. This function traverses the list of devices
- * and assigns actual adresses to these.
+ * and assigns actual addresses to these.
  */
 static void __init u300_assign_physmem(void)
 {
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index ca4a028..92c1242 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
 #include <mach/hardware.h>
 
 	.macro	addruart, rx, tmp
-	/* If we move the adress using MMU, use this. */
+	/* If we move the address using MMU, use this. */
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1			@ MMU enabled?
 	ldreq	\rx,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 6da6502..04ea836 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -68,12 +68,12 @@
 #define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x2000)
 #define U8500_CRYPTO0_BASE	(U8500_PER6_BASE + 0xa000)
 #define U8500_CRYPTO1_BASE	(U8500_PER6_BASE + 0xb000)
-#define U8500_CLKRST6_BASE	(U8500_PER7_BASE + 0xf000)
+#define U8500_CLKRST6_BASE	(U8500_PER6_BASE + 0xf000)
 
 /* per5 base addressess */
 #define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
 #define U8500_GPIO5_BASE	(U8500_PER5_BASE + 0x1e000)
-#define U8500_CLKRST5_BASE	(U8500_PER7_BASE + 0x1f000)
+#define U8500_CLKRST5_BASE	(U8500_PER5_BASE + 0x1f000)
 
 /* per4 base addressess */
 #define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x0000)
@@ -95,7 +95,7 @@
 #define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
 #define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
 #define U8500_GPIO3_BASE	(U8500_PER3_BASE + 0xe000)
-#define U8500_CLKRST3_BASE	(U8500_PER7_BASE + 0xf000)
+#define U8500_CLKRST3_BASE	(U8500_PER3_BASE + 0xf000)
 
 /* per2 base addressess */
 #define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
@@ -123,7 +123,7 @@
 #define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
 #define U8500_SLIM0_BASE	(U8500_PER1_BASE + 0xa000)
 #define U8500_GPIO1_BASE	(U8500_PER1_BASE + 0xe000)
-#define U8500_CLKRST1_BASE	(U8500_PER2_BASE + 0xf000)
+#define U8500_CLKRST1_BASE	(U8500_PER1_BASE + 0xf000)
 
 /* ST-Ericsson modified pl022 id */
 #define SSP_PER_ID		0x01080022
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 4d58ba1..f8730b6 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -57,3 +57,4 @@
 extern struct platform_device nuc900_device_kpi;
 extern struct platform_device nuc900_device_rtc;
 extern struct platform_device nuc900_device_ts;
+extern struct platform_device nuc900_device_lcd;
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index ec711f4..4887612 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -34,6 +34,7 @@
 #include <mach/regs-serial.h>
 #include <mach/nuc900_spi.h>
 #include <mach/map.h>
+#include <mach/fb.h>
 
 #include "cpu.h"
 
@@ -380,6 +381,47 @@
 	.resource	= nuc900_kpi_resource,
 };
 
+#ifdef CONFIG_FB_NUC900
+
+static struct resource nuc900_lcd_resource[] = {
+	[0] = {
+		.start = W90X900_PA_LCD,
+		.end   = W90X900_PA_LCD + W90X900_SZ_LCD - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_LCD,
+		.end   = IRQ_LCD,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_lcd_dmamask = -1;
+struct platform_device nuc900_device_lcd = {
+	.name             = "nuc900-lcd",
+	.id               = -1,
+	.num_resources    = ARRAY_SIZE(nuc900_lcd_resource),
+	.resource         = nuc900_lcd_resource,
+	.dev              = {
+		.dma_mask               = &nuc900_device_lcd_dmamask,
+		.coherent_dma_mask      = -1,
+	}
+};
+
+void  nuc900_fb_set_platdata(struct nuc900fb_mach_info *pd)
+{
+	struct nuc900fb_mach_info *npd;
+
+	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+	if (npd) {
+		memcpy(npd, pd, sizeof(*npd));
+		nuc900_device_lcd.dev.platform_data = npd;
+	} else {
+		printk(KERN_ERR "no memory for LCD platform data\n");
+	}
+}
+#endif
+
 /*Here should be your evb resourse,such as LCD*/
 
 static struct platform_device *nuc900_public_dev[] __initdata = {
diff --git a/arch/arm/mach-w90x900/include/mach/fb.h b/arch/arm/mach-w90x900/include/mach/fb.h
new file mode 100644
index 0000000..cec5ece
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/fb.h
@@ -0,0 +1,83 @@
+/* linux/include/asm/arch-nuc900/fb.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Changelog:
+ *
+ *   2008/08/26     vincen.zswan modify this file for LCD.
+ */
+
+#ifndef __ASM_ARM_FB_H
+#define __ASM_ARM_FB_H
+
+
+
+/* LCD Controller Hardware Desc */
+struct nuc900fb_hw {
+	unsigned int lcd_dccs;
+	unsigned int lcd_device_ctrl;
+	unsigned int lcd_mpulcd_cmd;
+	unsigned int lcd_int_cs;
+	unsigned int lcd_crtc_size;
+	unsigned int lcd_crtc_dend;
+	unsigned int lcd_crtc_hr;
+	unsigned int lcd_crtc_hsync;
+	unsigned int lcd_crtc_vr;
+	unsigned int lcd_va_baddr0;
+	unsigned int lcd_va_baddr1;
+	unsigned int lcd_va_fbctrl;
+	unsigned int lcd_va_scale;
+	unsigned int lcd_va_test;
+	unsigned int lcd_va_win;
+	unsigned int lcd_va_stuff;
+};
+
+/* LCD Display Description */
+struct nuc900fb_display {
+	/* LCD Image type */
+	unsigned type;
+
+	/* LCD Screen Size */
+	unsigned short width;
+	unsigned short height;
+
+	/* LCD Screen Info */
+	unsigned short xres;
+	unsigned short yres;
+	unsigned short bpp;
+
+	unsigned long pixclock;
+	unsigned short left_margin;
+	unsigned short right_margin;
+	unsigned short hsync_len;
+	unsigned short upper_margin;
+	unsigned short lower_margin;
+	unsigned short vsync_len;
+
+	/* hardware special register value */
+	unsigned int dccs;
+	unsigned int devctl;
+	unsigned int fbctrl;
+	unsigned int scale;
+};
+
+struct nuc900fb_mach_info {
+	struct nuc900fb_display *displays;
+	unsigned num_displays;
+	unsigned default_display;
+	/* GPIO Setting  Info */
+	unsigned gpio_dir;
+	unsigned gpio_dir_mask;
+	unsigned gpio_data;
+	unsigned gpio_data_mask;
+};
+
+extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *);
+
+#endif /* __ASM_ARM_FB_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-ldm.h b/arch/arm/mach-w90x900/include/mach/regs-ldm.h
new file mode 100644
index 0000000..e9d480a
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-ldm.h
@@ -0,0 +1,253 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-serial.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *  Description:
+ *     Nuvoton Display, LCM Register list
+ *  Author:  Wang Qiang (rurality.linux@gmail.com) 2009/12/11
+ *
+ */
+
+
+#ifndef __ASM_ARM_W90X900_REGS_LDM_H
+#define __ASM_ARM_W90X900_REGS_LDM_H
+
+#include <mach/map.h>
+
+/* Display Controller Control/Status Register */
+#define REG_LCM_DCCS			(0x00)
+
+#define LCM_DCCS_ENG_RST		(1 << 0)
+#define LCM_DCCS_VA_EN			(1 << 1)
+#define LCM_DCCS_OSD_EN			(1 << 2)
+#define LCM_DCCS_DISP_OUT_EN		(1 << 3)
+#define LCM_DCCS_DISP_INT_EN		(1 << 4)
+#define LCM_DCCS_CMD_ON			(1 << 5)
+#define LCM_DCCS_FIELD_INTR		(1 << 6)
+#define LCM_DCCS_SINGLE			(1 << 7)
+
+enum LCM_DCCS_VA_SRC {
+	LCM_DCCS_VA_SRC_YUV422		= (0 << 8),
+	LCM_DCCS_VA_SRC_YCBCR422	= (1 << 8),
+	LCM_DCCS_VA_SRC_RGB888		= (2 << 8),
+	LCM_DCCS_VA_SRC_RGB666		= (3 << 8),
+	LCM_DCCS_VA_SRC_RGB565		= (4 << 8),
+	LCM_DCCS_VA_SRC_RGB444LOW	= (5 << 8),
+	LCM_DCCS_VA_SRC_RGB444HIGH 	= (7 << 8)
+};
+
+
+/* Display Device Control Register */
+#define REG_LCM_DEV_CTRL		(0x04)
+
+enum LCM_DEV_CTRL_SWAP_YCbCr {
+	LCM_DEV_CTRL_SWAP_UYVY		= (0 << 1),
+	LCM_DEV_CTRL_SWAP_YUYV		= (1 << 1),
+	LCM_DEV_CTRL_SWAP_VYUY		= (2 << 1),
+	LCM_DEV_CTRL_SWAP_YVYU		= (3 << 1)
+};
+
+enum LCM_DEV_CTRL_RGB_SHIFT {
+	LCM_DEV_CTRL_RGB_SHIFT_NOT 	= (0 << 3),
+	LCM_DEV_CTRL_RGB_SHIFT_ONECYCLE = (1 << 3),
+	LCM_DEV_CTRL_RGB_SHIFT_TWOCYCLE = (2 << 3),
+	LCM_DEV_CTRL_RGB_SHIFT_NOT_DEF	= (3 << 3)
+};
+
+enum LCM_DEV_CTRL_DEVICE {
+	LCM_DEV_CTRL_DEVICE_YUV422	= (0 << 5),
+	LCM_DEV_CTRL_DEVICE_YUV444	= (1 << 5),
+	LCM_DEV_CTRL_DEVICE_UNIPAC	= (4 << 5),
+	LCM_DEV_CTRL_DEVICE_SEIKO_EPSON	= (5 << 5),
+	LCM_DEV_CTRL_DEVICE_HIGH_COLOR	= (6 << 5),
+	LCM_DEV_CTRL_DEVICE_MPU		= (7 << 5)
+};
+
+#define LCM_DEV_CTRL_LCD_DDA		(8)
+#define LCM_DEV_CTRL_YUV2CCIR		(16)
+
+enum LCM_DEV_CTRL_LCD_SEL {
+	LCM_DEV_CTRL_LCD_SEL_RGB_GBR	= (0 << 17),
+	LCM_DEV_CTRL_LCD_SEL_BGR_RBG	= (1 << 17),
+	LCM_DEV_CTRL_LCD_SEL_GBR_RGB	= (2 << 17),
+	LCM_DEV_CTRL_LCD_SEL_RBG_BGR	= (3 << 17)
+};
+
+enum LCM_DEV_CTRL_FAL_D {
+	LCM_DEV_CTRL_FAL_D_FALLING	= (0 << 19),
+	LCM_DEV_CTRL_FAL_D_RISING	= (1 << 19),
+};
+
+enum LCM_DEV_CTRL_H_POL {
+	LCM_DEV_CTRL_H_POL_LOW		= (0 << 20),
+	LCM_DEV_CTRL_H_POL_HIGH		= (1 << 20),
+};
+
+enum LCM_DEV_CTRL_V_POL {
+	LCM_DEV_CTRL_V_POL_LOW		= (0 << 21),
+	LCM_DEV_CTRL_V_POL_HIGH		= (1 << 21),
+};
+
+enum LCM_DEV_CTRL_VR_LACE {
+	LCM_DEV_CTRL_VR_LACE_NINTERLACE	= (0 << 22),
+	LCM_DEV_CTRL_VR_LACE_INTERLACE	= (1 << 22),
+};
+
+enum LCM_DEV_CTRL_LACE {
+	LCM_DEV_CTRL_LACE_NINTERLACE	= (0 << 23),
+	LCM_DEV_CTRL_LACE_INTERLACE	= (1 << 23),
+};
+
+enum LCM_DEV_CTRL_RGB_SCALE {
+	LCM_DEV_CTRL_RGB_SCALE_4096 	= (0 << 24),
+	LCM_DEV_CTRL_RGB_SCALE_65536 	= (1 << 24),
+	LCM_DEV_CTRL_RGB_SCALE_262144 	= (2 << 24),
+	LCM_DEV_CTRL_RGB_SCALE_16777216 = (3 << 24),
+};
+
+enum LCM_DEV_CTRL_DBWORD {
+	LCM_DEV_CTRL_DBWORD_HALFWORD	= (0 << 26),
+	LCM_DEV_CTRL_DBWORD_FULLWORD	= (1 << 26),
+};
+
+enum LCM_DEV_CTRL_MPU68 {
+	LCM_DEV_CTRL_MPU68_80_SERIES	= (0 << 27),
+	LCM_DEV_CTRL_MPU68_68_SERIES	= (1 << 27),
+};
+
+enum LCM_DEV_CTRL_DE_POL {
+	LCM_DEV_CTRL_DE_POL_HIGH	= (0 << 28),
+	LCM_DEV_CTRL_DE_POL_LOW		= (1 << 28),
+};
+
+#define LCM_DEV_CTRL_CMD16		(29)
+#define LCM_DEV_CTRL_CM16t18		(30)
+#define LCM_DEV_CTRL_CMD_LOW		(31)
+
+/* MPU-Interface LCD Write Command */
+#define REG_LCM_MPU_CMD			(0x08)
+
+/* Interrupt Control/Status Register */
+#define REG_LCM_INT_CS			(0x0c)
+#define LCM_INT_CS_DISP_F_EN		(1 << 0)
+#define LCM_INT_CS_UNDERRUN_EN   	(1 << 1)
+#define LCM_INT_CS_BUS_ERROR_INT 	(1 << 28)
+#define LCM_INT_CS_UNDERRUN_INT  	(1 << 29)
+#define LCM_INT_CS_DISP_F_STATUS 	(1 << 30)
+#define LCM_INT_CS_DISP_F_INT		(1 << 31)
+
+/* CRTC Display Size Control Register */
+#define REG_LCM_CRTC_SIZE		(0x10)
+#define LCM_CRTC_SIZE_VTTVAL(x)		((x) << 16)
+#define LCM_CRTC_SIZE_HTTVAL(x)		((x) << 0)
+
+/* CRTC Display Enable End */
+#define REG_LCM_CRTC_DEND		(0x14)
+#define LCM_CRTC_DEND_VDENDVAL(x)	((x) << 16)
+#define LCM_CRTC_DEND_HDENDVAL(x)	((x) << 0)
+
+/* CRTC Internal Horizontal Retrace Control Register */
+#define REG_LCM_CRTC_HR			(0x18)
+#define LCM_CRTC_HR_EVAL(x)		((x) << 16)
+#define LCM_CRTC_HR_SVAL(x)		((x) << 0)
+
+/* CRTC Horizontal Sync Control Register */
+#define REG_LCM_CRTC_HSYNC		(0x1C)
+#define LCM_CRTC_HSYNC_SHIFTVAL(x)	((x) << 30)
+#define LCM_CRTC_HSYNC_EVAL(x)		((x) << 16)
+#define LCM_CRTC_HSYNC_SVAL(x)		((x) << 0)
+
+/* CRTC Internal Vertical Retrace Control Register */
+#define REG_LCM_CRTC_VR			(0x20)
+#define LCM_CRTC_VR_EVAL(x)		((x) << 16)
+#define LCM_CRTC_VR_SVAL(x)		((x) << 0)
+
+/* Video Stream Frame Buffer-0 Starting Address */
+#define REG_LCM_VA_BADDR0		(0x24)
+
+/* Video Stream Frame Buffer-1 Starting Address */
+#define REG_LCM_VA_BADDR1		(0x28)
+
+/* Video Stream Frame Buffer Control Register */
+#define REG_LCM_VA_FBCTRL		(0x2C)
+#define LCM_VA_FBCTRL_IO_REGION_HALF	(1 << 28)
+#define LCM_VA_FBCTRL_FIELD_DUAL  	(1 << 29)
+#define LCM_VA_FBCTRL_START_BUF 	(1 << 30)
+#define LCM_VA_FBCTRL_DB_EN		(1 << 31)
+
+/* Video Stream Scaling Control Register */
+#define REG_LCM_VA_SCALE		(0x30)
+#define LCM_VA_SCALE_XCOPY_INTERPOLATION (0 << 15)
+#define LCM_VA_SCALE_XCOPY_DUPLICATION	 (1 << 15)
+
+/* Image Stream Active Window Coordinates */
+#define REG_LCM_VA_WIN			(0x38)
+
+/* Image Stream Stuff Pixel */
+#define REG_LCM_VA_STUFF		(0x3C)
+
+/* OSD Window Starting Coordinates */
+#define REG_LCM_OSD_WINS		(0x40)
+
+/* OSD Window Ending Coordinates */
+#define REG_LCM_OSD_WINE		(0x44)
+
+/* OSD Stream Frame Buffer Starting Address */
+#define REG_LCM_OSD_BADDR		(0x48)
+
+/* OSD Stream Frame Buffer Control Register */
+#define REG_LCM_OSD_FBCTRL		(0x4c)
+
+/* OSD Overlay Control Register */
+#define REG_LCM_OSD_OVERLAY		(0x50)
+
+/* OSD Overlay Color-Key Pattern Register */
+#define REG_LCM_OSD_CKEY		(0x54)
+
+/* OSD Overlay Color-Key Mask Register */
+#define REG_LCM_OSD_CMASK		(0x58)
+
+/* OSD Window Skip1 Register */
+#define REG_LCM_OSD_SKIP1		(0x5C)
+
+/* OSD Window Skip2 Register */
+#define REG_LCM_OSD_SKIP2		(0x60)
+
+/* OSD horizontal up scaling control register */
+#define REG_LCM_OSD_SCALE		(0x64)
+
+/* MPU Vsync control register */
+#define REG_LCM_MPU_VSYNC		(0x68)
+
+/* Hardware cursor control Register */
+#define REG_LCM_HC_CTRL			(0x6C)
+
+/* Hardware cursot tip point potison on va picture */
+#define REG_LCM_HC_POS			(0x70)
+
+/* Hardware Cursor Window Buffer Control Register */
+#define REG_LCM_HC_WBCTRL		(0x74)
+
+/* Hardware cursor memory base address register */
+#define REG_LCM_HC_BADDR		(0x78)
+
+/* Hardware cursor color ram register mapped to bpp = 0 */
+#define REG_LCM_HC_COLOR0		(0x7C)
+
+/* Hardware cursor color ram register mapped to bpp = 1 */
+#define REG_LCM_HC_COLOR1		(0x80)
+
+/* Hardware cursor color ram register mapped to bpp = 2 */
+#define REG_LCM_HC_COLOR2		(0x84)
+
+/* Hardware cursor color ram register mapped to bpp = 3 */
+#define REG_LCM_HC_COLOR3		(0x88)
+
+#endif /* __ASM_ARM_W90X900_REGS_LDM_H */
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index cef903b..b3edc3c 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -10,6 +10,8 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation;version 2 of the License.
+ *   history:
+ *     Wang Qiang (rurality.linux@gmail.com) add LCD support
  *
  */
 
@@ -18,9 +20,51 @@
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <mach/map.h>
+#include <mach/regs-ldm.h>
+#include <mach/fb.h>
 
 #include "nuc950.h"
 
+#ifdef CONFIG_FB_NUC900
+/* LCD Controller */
+static struct nuc900fb_display __initdata nuc950_lcd_info[] = {
+	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
+	[0] = {
+		.type		= LCM_DCCS_VA_SRC_RGB565,
+		.width 		= 320,
+		.height		= 240,
+		.xres		= 320,
+		.yres		= 240,
+		.bpp		= 16,
+		.pixclock	= 200000,
+		.left_margin	= 34,
+		.right_margin   = 54,
+		.hsync_len	= 10,
+		.upper_margin	= 18,
+		.lower_margin	= 4,
+		.vsync_len	= 1,
+		.dccs		= 0x8e00041a,
+		.devctl		= 0x060800c0,
+		.fbctrl		= 0x00a000a0,
+		.scale		= 0x04000400,
+	},
+};
+
+static struct nuc900fb_mach_info nuc950_fb_info __initdata = {
+#if defined(CONFIG_GPM1040A0_320X240)
+	.displays		= &nuc950_lcd_info[0],
+#else
+	.displays		= nuc950_lcd_info,
+#endif
+	.num_displays 		= ARRAY_SIZE(nuc950_lcd_info),
+	.default_display	= 0,
+	.gpio_dir		= 0x00000004,
+	.gpio_dir_mask		= 0xFFFFFFFD,
+	.gpio_data		= 0x00000004,
+	.gpio_data_mask		= 0xFFFFFFFD,
+};
+#endif
+
 static void __init nuc950evb_map_io(void)
 {
 	nuc950_map_io();
@@ -30,6 +74,9 @@
 static void __init nuc950evb_init(void)
 {
 	nuc950_board_init();
+#ifdef CONFIG_FB_NUC900
+	nuc900_fb_set_platdata(&nuc950_fb_info);
+#endif
 }
 
 MACHINE_START(W90P950EVB, "W90P950EVB")
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
index 1495081..4d1f1ab 100644
--- a/arch/arm/mach-w90x900/nuc950.c
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
+
 #include "cpu.h"
 
 /* define specific CPU platform device */
@@ -25,6 +26,9 @@
 static struct platform_device *nuc950_dev[] __initdata = {
 	&nuc900_device_kpi,
 	&nuc900_device_fmi,
+#ifdef CONFIG_FB_NUC900
+	&nuc900_device_lcd,
+#endif
 };
 
 /* define specific CPU platform io map */
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8b0a1ee..7f7ad6f2 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -9,38 +9,43 @@
 config ARCH_MX1
 	bool "MX1-based"
 	select CPU_ARM920T
-	select COMMON_CLKDEV
+	select IMX_HAVE_IOMUX_V1
 	help
 	  This enables support for systems based on the Freescale i.MX1 family
 
 config ARCH_MX2
 	bool "MX2-based"
 	select CPU_ARM926T
-	select COMMON_CLKDEV
+	select IMX_HAVE_IOMUX_V1
 	help
 	  This enables support for systems based on the Freescale i.MX2 family
 
 config ARCH_MX25
 	bool "MX25-based"
 	select CPU_ARM926T
-	select COMMON_CLKDEV
+	select ARCH_MXC_IOMUX_V3
+	select HAVE_FB_IMX
 	help
 	  This enables support for systems based on the Freescale i.MX25 family
 
 config ARCH_MX3
 	bool "MX3-based"
 	select CPU_V6
-	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
 config ARCH_MXC91231
 	bool "MXC91231-based"
 	select CPU_V6
-	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale MXC91231 family
 
+config ARCH_MX5
+	bool "MX5-based"
+	select CPU_V7
+	help
+	  This enables support for systems based on the Freescale i.MX51 family
+
 endchoice
 
 source "arch/arm/mach-mx1/Kconfig"
@@ -48,12 +53,12 @@
 source "arch/arm/mach-mx3/Kconfig"
 source "arch/arm/mach-mx25/Kconfig"
 source "arch/arm/mach-mxc91231/Kconfig"
+source "arch/arm/mach-mx5/Kconfig"
 
 endmenu
 
 config MXC_IRQ_PRIOR
 	bool "Use IRQ priority"
-	depends on ARCH_MXC
 	help
 	  Select this if you want to use prioritized IRQ handling.
 	  This feature prevents higher priority ISR to be interrupted
@@ -62,9 +67,16 @@
 	  requirements for timing.
 	  Say N here, unless you have a specialized requirement.
 
+config MXC_TZIC
+	bool "Enable TrustZone Interrupt Controller"
+	depends on ARCH_MX51
+	help
+	  This will be automatically selected for all processors
+	  containing this interrupt controller.
+	  Say N here only if you are really sure.
+
 config MXC_PWM
 	tristate "Enable PWM driver"
-	depends on ARCH_MXC
 	select HAVE_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
@@ -74,7 +86,9 @@
 
 config ARCH_HAS_RNGA
 	bool
-	depends on ARCH_MXC
+
+config IMX_HAVE_IOMUX_V1
+	bool
 
 config ARCH_MXC_IOMUX_V3
 	bool
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 6cee38d..895bc3c 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,8 +5,12 @@
 # Common support
 obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 
-obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
-obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
+obj-$(CONFIG_MXC_TZIC) += tzic.o
+
+obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
+obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
 obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
index da6387d..b62917c 100644
--- a/arch/arm/plat-mxc/audmux-v1.c
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -50,8 +50,18 @@
 
 static int mxc_audmux_v1_init(void)
 {
-	if (cpu_is_mx27() || cpu_is_mx21())
-		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21())
+		audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR);
+	else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR);
+	else
+#endif
+		(void)0;
+	
 	return 0;
 }
 
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index b06954a..d983cd6 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -190,7 +190,10 @@
 {
 	int ret;
 
-	if (cpu_is_mx35()) {
+	if (cpu_is_mx31())
+		audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
+
+	else if (cpu_is_mx35()) {
 		audmux_clk = clk_get(NULL, "audmux");
 		if (IS_ERR(audmux_clk)) {
 			ret = PTR_ERR(audmux_clk);
@@ -198,11 +201,9 @@
 					ret);
 			return ret;
 		}
+		audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
 	}
 
-	if (cpu_is_mx31() || cpu_is_mx35())
-		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
-
 	audmux_debugfs_init();
 
 	return 0;
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 9e8fbd5..323ff8c 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -56,6 +56,7 @@
 	__clk_disable(clk->parent);
 	__clk_disable(clk->secondary);
 
+	WARN_ON(!clk->usecount);
 	if (!(--clk->usecount) && clk->disable)
 		clk->disable(clk);
 }
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 9c1b3f9..e16014b 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -128,6 +128,18 @@
 	int hw_chaining;
 };
 
+static void __iomem *imx_dmav1_baseaddr;
+
+static void imx_dmav1_writel(unsigned val, unsigned offset)
+{
+	__raw_writel(val, imx_dmav1_baseaddr + offset);
+}
+
+static unsigned imx_dmav1_readl(unsigned offset)
+{
+	return __raw_readl(imx_dmav1_baseaddr + offset);
+}
+
 static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
 
 static struct clk *dma_clk;
@@ -140,7 +152,6 @@
 		return 0;
 }
 
-
 /*
  * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
  */
@@ -160,17 +171,17 @@
 		imxdma->resbytes -= now;
 
 	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
-		__raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel));
+		imx_dmav1_writel(sg->dma_address, DMA_DAR(channel));
 	else
-		__raw_writel(sg->dma_address, DMA_BASE + DMA_SAR(channel));
+		imx_dmav1_writel(sg->dma_address, DMA_SAR(channel));
 
-	__raw_writel(now, DMA_BASE + DMA_CNTR(channel));
+	imx_dmav1_writel(now, DMA_CNTR(channel));
 
 	pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, "
 		"size 0x%08x\n", channel,
-		 __raw_readl(DMA_BASE + DMA_DAR(channel)),
-		 __raw_readl(DMA_BASE + DMA_SAR(channel)),
-		 __raw_readl(DMA_BASE + DMA_CNTR(channel)));
+		 imx_dmav1_readl(DMA_DAR(channel)),
+		 imx_dmav1_readl(DMA_SAR(channel)),
+		 imx_dmav1_readl(DMA_CNTR(channel)));
 
 	return now;
 }
@@ -218,27 +229,26 @@
 			channel, __func__, (unsigned int)dma_address,
 			dma_length, dev_addr);
 
-		__raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
-		__raw_writel(dma_address, DMA_BASE + DMA_DAR(channel));
-		__raw_writel(imxdma->ccr_from_device,
-				DMA_BASE + DMA_CCR(channel));
+		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+		imx_dmav1_writel(dma_address, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
 	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
 		pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
 			"dev_addr=0x%08x for write\n",
 			channel, __func__, (unsigned int)dma_address,
 			dma_length, dev_addr);
 
-		__raw_writel(dma_address, DMA_BASE + DMA_SAR(channel));
-		__raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
-		__raw_writel(imxdma->ccr_to_device,
-				DMA_BASE + DMA_CCR(channel));
+		imx_dmav1_writel(dma_address, DMA_SAR(channel));
+		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_to_device,
+				DMA_CCR(channel));
 	} else {
 		printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
 		       channel);
 		return -EINVAL;
 	}
 
-	__raw_writel(dma_length, DMA_BASE + DMA_CNTR(channel));
+	imx_dmav1_writel(dma_length, DMA_CNTR(channel));
 
 	return 0;
 }
@@ -316,17 +326,15 @@
 			"dev_addr=0x%08x for read\n",
 			channel, __func__, sg, sgcount, dma_length, dev_addr);
 
-		__raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
-		__raw_writel(imxdma->ccr_from_device,
-				DMA_BASE + DMA_CCR(channel));
+		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
 	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
 		pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
 			"dev_addr=0x%08x for write\n",
 			channel, __func__, sg, sgcount, dma_length, dev_addr);
 
-		__raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
-		__raw_writel(imxdma->ccr_to_device,
-				DMA_BASE + DMA_CCR(channel));
+		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel));
 	} else {
 		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
 		       channel);
@@ -360,7 +368,7 @@
 	imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq;
 	imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq;
 
-	__raw_writel(dmareq, DMA_BASE + DMA_RSSR(channel));
+	imx_dmav1_writel(dmareq, DMA_RSSR(channel));
 
 	return 0;
 }
@@ -368,7 +376,7 @@
 
 void imx_dma_config_burstlen(int channel, unsigned int burstlen)
 {
-	__raw_writel(burstlen, DMA_BASE + DMA_BLR(channel));
+	imx_dmav1_writel(burstlen, DMA_BLR(channel));
 }
 EXPORT_SYMBOL(imx_dma_config_burstlen);
 
@@ -398,7 +406,7 @@
 	}
 
 	local_irq_save(flags);
-	__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel(1 << channel, DMA_DISR);
 	imxdma->irq_handler = irq_handler;
 	imxdma->err_handler = err_handler;
 	imxdma->data = data;
@@ -462,22 +470,21 @@
 
 	local_irq_save(flags);
 
-	__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) & ~(1 << channel),
-		DMA_BASE + DMA_DIMR);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) | CCR_CEN |
-		CCR_ACRPT,
-		DMA_BASE + DMA_CCR(channel));
+	imx_dmav1_writel(1 << channel, DMA_DISR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN |
+		CCR_ACRPT, DMA_CCR(channel));
 
 #ifdef CONFIG_ARCH_MX2
-	if (imxdma->sg && imx_dma_hw_chain(imxdma)) {
+	if ((cpu_is_mx21() || cpu_is_mx27()) &&
+			imxdma->sg && imx_dma_hw_chain(imxdma)) {
 		imxdma->sg = sg_next(imxdma->sg);
 		if (imxdma->sg) {
 			u32 tmp;
 			imx_dma_sg_next(channel, imxdma->sg);
-			tmp = __raw_readl(DMA_BASE + DMA_CCR(channel));
-			__raw_writel(tmp | CCR_RPT | CCR_ACRPT,
-				DMA_BASE + DMA_CCR(channel));
+			tmp = imx_dmav1_readl(DMA_CCR(channel));
+			imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT,
+				DMA_CCR(channel));
 		}
 	}
 #endif
@@ -502,11 +509,10 @@
 		del_timer(&imxdma->watchdog);
 
 	local_irq_save(flags);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
-		DMA_BASE + DMA_DIMR);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
-		DMA_BASE + DMA_CCR(channel));
-	__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN,
+			DMA_CCR(channel));
+	imx_dmav1_writel(1 << channel, DMA_DISR);
 	imxdma->in_use = 0;
 	local_irq_restore(flags);
 }
@@ -517,7 +523,7 @@
 {
 	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
 
-	__raw_writel(0, DMA_BASE + DMA_CCR(chno));
+	imx_dmav1_writel(0, DMA_CCR(chno));
 	imxdma->in_use = 0;
 	imxdma->sg = NULL;
 
@@ -533,17 +539,17 @@
 	unsigned int err_mask;
 	int errcode;
 
-	disr = __raw_readl(DMA_BASE + DMA_DISR);
+	disr = imx_dmav1_readl(DMA_DISR);
 
-	err_mask = __raw_readl(DMA_BASE + DMA_DBTOSR) |
-		   __raw_readl(DMA_BASE + DMA_DRTOSR) |
-		   __raw_readl(DMA_BASE + DMA_DSESR)  |
-		   __raw_readl(DMA_BASE + DMA_DBOSR);
+	err_mask = imx_dmav1_readl(DMA_DBTOSR) |
+		   imx_dmav1_readl(DMA_DRTOSR) |
+		   imx_dmav1_readl(DMA_DSESR)  |
+		   imx_dmav1_readl(DMA_DBOSR);
 
 	if (!err_mask)
 		return IRQ_HANDLED;
 
-	__raw_writel(disr & err_mask, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel(disr & err_mask, DMA_DISR);
 
 	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
 		if (!(err_mask & (1 << i)))
@@ -551,20 +557,20 @@
 		imxdma = &imx_dma_channels[i];
 		errcode = 0;
 
-		if (__raw_readl(DMA_BASE + DMA_DBTOSR) & (1 << i)) {
-			__raw_writel(1 << i, DMA_BASE + DMA_DBTOSR);
+		if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DBTOSR);
 			errcode |= IMX_DMA_ERR_BURST;
 		}
-		if (__raw_readl(DMA_BASE + DMA_DRTOSR) & (1 << i)) {
-			__raw_writel(1 << i, DMA_BASE + DMA_DRTOSR);
+		if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DRTOSR);
 			errcode |= IMX_DMA_ERR_REQUEST;
 		}
-		if (__raw_readl(DMA_BASE + DMA_DSESR) & (1 << i)) {
-			__raw_writel(1 << i, DMA_BASE + DMA_DSESR);
+		if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DSESR);
 			errcode |= IMX_DMA_ERR_TRANSFER;
 		}
-		if (__raw_readl(DMA_BASE + DMA_DBOSR) & (1 << i)) {
-			__raw_writel(1 << i, DMA_BASE + DMA_DBOSR);
+		if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DBOSR);
 			errcode |= IMX_DMA_ERR_BUFFER;
 		}
 		if (imxdma->name && imxdma->err_handler) {
@@ -607,7 +613,7 @@
 		if (imxdma->sg) {
 			imx_dma_sg_next(chno, imxdma->sg);
 
-			tmp = __raw_readl(DMA_BASE + DMA_CCR(chno));
+			tmp = imx_dmav1_readl(DMA_CCR(chno));
 
 			if (imx_dma_hw_chain(imxdma)) {
 				/* FIXME: The timeout should probably be
@@ -617,15 +623,13 @@
 					jiffies + msecs_to_jiffies(500));
 
 				tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT;
-				__raw_writel(tmp, DMA_BASE +
-						DMA_CCR(chno));
+				imx_dmav1_writel(tmp, DMA_CCR(chno));
 			} else {
-				__raw_writel(tmp & ~CCR_CEN, DMA_BASE +
-						DMA_CCR(chno));
+				imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno));
 				tmp |= CCR_CEN;
 			}
 
-			__raw_writel(tmp, DMA_BASE + DMA_CCR(chno));
+			imx_dmav1_writel(tmp, DMA_CCR(chno));
 
 			if (imxdma->prog_handler)
 				imxdma->prog_handler(chno, imxdma->data,
@@ -640,7 +644,7 @@
 		}
 	}
 
-	__raw_writel(0, DMA_BASE + DMA_CCR(chno));
+	imx_dmav1_writel(0, DMA_CCR(chno));
 	imxdma->in_use = 0;
 	if (imxdma->irq_handler)
 		imxdma->irq_handler(chno, imxdma->data);
@@ -651,15 +655,16 @@
 	int i, disr;
 
 #ifdef CONFIG_ARCH_MX2
-	dma_err_handler(irq, dev_id);
+	if (cpu_is_mx21() || cpu_is_mx27())
+		dma_err_handler(irq, dev_id);
 #endif
 
-	disr = __raw_readl(DMA_BASE + DMA_DISR);
+	disr = imx_dmav1_readl(DMA_DISR);
 
 	pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
 		     disr);
 
-	__raw_writel(disr, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel(disr, DMA_DISR);
 	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
 		if (disr & (1 << i))
 			dma_irq_handle_channel(i);
@@ -699,17 +704,19 @@
 	local_irq_restore(flags); /* request_irq() can block */
 
 #ifdef CONFIG_ARCH_MX2
-	ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
-			NULL);
-	if (ret) {
-		imxdma->name = NULL;
-		printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
-				MXC_INT_DMACH0 + channel, channel);
-		return ret;
+	if (cpu_is_mx21() || cpu_is_mx27()) {
+		ret = request_irq(MX2x_INT_DMACH0 + channel,
+				dma_irq_handler, 0, "DMA", NULL);
+		if (ret) {
+			imxdma->name = NULL;
+			pr_crit("Can't register IRQ %d for DMA channel %d\n",
+					MX2x_INT_DMACH0 + channel, channel);
+			return ret;
+		}
+		init_timer(&imxdma->watchdog);
+		imxdma->watchdog.function = &imx_dma_watchdog;
+		imxdma->watchdog.data = channel;
 	}
-	init_timer(&imxdma->watchdog);
-	imxdma->watchdog.function = &imx_dma_watchdog;
-	imxdma->watchdog.data = channel;
 #endif
 
 	return ret;
@@ -738,7 +745,8 @@
 	imxdma->name = NULL;
 
 #ifdef CONFIG_ARCH_MX2
-	free_irq(MXC_INT_DMACH0 + channel, NULL);
+	if (cpu_is_mx21() || cpu_is_mx27())
+		free_irq(MX2x_INT_DMACH0 + channel, NULL);
 #endif
 
 	local_irq_restore(flags);
@@ -796,34 +804,53 @@
 	int ret = 0;
 	int i;
 
+#ifdef CONFIG_ARCH_MX1
+	if (cpu_is_mx1())
+		imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
+	else
+#endif
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21())
+		imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
+	else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
+	else
+#endif
+		BUG();
+
 	dma_clk = clk_get(NULL, "dma");
 	clk_enable(dma_clk);
 
 	/* reset DMA module */
-	__raw_writel(DCR_DRST, DMA_BASE + DMA_DCR);
+	imx_dmav1_writel(DCR_DRST, DMA_DCR);
 
 #ifdef CONFIG_ARCH_MX1
-	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		return ret;
-	}
+	if (cpu_is_mx1()) {
+		ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL);
+		if (ret) {
+			pr_crit("Wow!  Can't register IRQ for DMA\n");
+			return ret;
+		}
 
-	ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register ERRIRQ for DMA\n");
-		free_irq(DMA_INT, NULL);
-		return ret;
+		ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL);
+		if (ret) {
+			pr_crit("Wow!  Can't register ERRIRQ for DMA\n");
+			free_irq(MX1_DMA_INT, NULL);
+			return ret;
+		}
 	}
 #endif
 	/* enable DMA module */
-	__raw_writel(DCR_DEN, DMA_BASE + DMA_DCR);
+	imx_dmav1_writel(DCR_DEN, DMA_DCR);
 
 	/* clear all interrupts */
-	__raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR);
 
 	/* disable interrupts */
-	__raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DIMR);
+	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR);
 
 	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
 		imx_dma_channels[i].sg = NULL;
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 41599be..cb0b63874 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -25,25 +25,37 @@
 #define USBCTRL_OTGBASE_OFFSET	0x600
 
 #define MX31_OTG_SIC_SHIFT	29
-#define MX31_OTG_SIC_MASK	(0xf << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
 #define MX31_OTG_PM_BIT		(1 << 24)
 
 #define MX31_H2_SIC_SHIFT	21
-#define MX31_H2_SIC_MASK	(0xf << MX31_H2_SIC_SHIFT)
+#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
 #define MX31_H2_PM_BIT		(1 << 16)
 #define MX31_H2_DT_BIT		(1 << 5)
 
 #define MX31_H1_SIC_SHIFT	13
-#define MX31_H1_SIC_MASK	(0xf << MX31_H1_SIC_SHIFT)
+#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
 #define MX31_H1_PM_BIT		(1 << 8)
 #define MX31_H1_DT_BIT		(1 << 4)
 
+#define MX35_OTG_SIC_SHIFT	29
+#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT		(1 << 24)
+
+#define MX35_H1_SIC_SHIFT	21
+#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
+#define MX35_H1_TLL_BIT		(1 << 5)
+#define MX35_H1_USBTE_BIT	(1 << 4)
+
 int mxc_set_usbcontrol(int port, unsigned int flags)
 {
 	unsigned int v;
-
+#ifdef CONFIG_ARCH_MX3
 	if (cpu_is_mx31()) {
-		v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR +
+		v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 
 		switch (port) {
@@ -51,15 +63,15 @@
 			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
 			v |= (flags & MXC_EHCI_INTERFACE_MASK)
 					<< MX31_OTG_SIC_SHIFT;
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
 				v |= MX31_OTG_PM_BIT;
 
 			break;
 		case 1: /* H1 port */
-			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT);
+			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
 			v |= (flags & MXC_EHCI_INTERFACE_MASK)
 						<< MX31_H1_SIC_SHIFT;
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
 				v |= MX31_H1_PM_BIT;
 
 			if (!(flags & MXC_EHCI_TTL_ENABLED))
@@ -67,7 +79,7 @@
 
 			break;
 		case 2:	/* H2 port */
-			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT);
+			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
 			v |= (flags & MXC_EHCI_INTERFACE_MASK)
 						<< MX31_H2_SIC_SHIFT;
 			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
@@ -77,13 +89,103 @@
 				v |= MX31_H2_DT_BIT;
 
 			break;
+		default:
+			return -EINVAL;
 		}
 
-		writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR +
+		writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 		return 0;
 	}
 
+	if (cpu_is_mx35()) {
+		v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX35_OTG_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_OTG_PM_BIT;
+
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX35_H1_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX35_H1_TLL_BIT;
+
+			if (flags & MXC_EHCI_INTERNAL_PHY)
+				v |= MX35_H1_USBTE_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_DOWN)
+				v |= MX35_H1_IPPUE_DOWN_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_UP)
+				v |= MX35_H1_IPPUE_UP_BIT;
+
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		return 0;
+	}
+#endif /* CONFIG_ARCH_MX3 */
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27()) {
+		/* On i.MX27 we can use the i.MX31 USBCTRL bits, they
+		 * are identical
+		 */
+		v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX31_OTG_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_OTG_PM_BIT;
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H1_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H1_DT_BIT;
+
+			break;
+		case 2:	/* H2 port */
+			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H2_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_H2_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H2_DT_BIT;
+
+			break;
+		default:
+			return -EINVAL;
+		}
+		writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		return 0;
+	}
+#endif /* CONFIG_MACH_MX27 */
 	printk(KERN_WARNING
 		"%s() unable to setup USBCONTROL for this CPU\n", __func__);
 	return -EINVAL;
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index d65ebe3..70b2389 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -140,16 +140,13 @@
 	val = __raw_readl(reg);
 	edge = (val >> (bit << 1)) & 3;
 	val &= ~(0x3 << (bit << 1));
-	switch (edge) {
-	case GPIO_INT_HIGH_LEV:
+	if (edge == GPIO_INT_HIGH_LEV) {
 		edge = GPIO_INT_LOW_LEV;
 		pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
-		break;
-	case GPIO_INT_LOW_LEV:
+	} else if (edge == GPIO_INT_LOW_LEV) {
 		edge = GPIO_INT_HIGH_LEV;
 		pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
-		break;
-	default:
+	} else {
 		pr_err("mxc: invalid configuration for GPIO %d: %x\n",
 		       gpio, edge);
 		return;
@@ -157,25 +154,20 @@
 	__raw_writel(val | (edge << (bit << 1)), reg);
 }
 
-/* handle n interrupts in one status register */
+/* handle 32 interrupts in one status register */
 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 {
-	u32 gpio_irq_no;
+	u32 gpio_irq_no_base = port->virtual_irq_start;
 
-	gpio_irq_no = port->virtual_irq_start;
-	for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
-		u32 gpio = irq_to_gpio(gpio_irq_no);
+	while (irq_stat != 0) {
+		int irqoffset = fls(irq_stat) - 1;
 
-		if ((irq_stat & 1) == 0)
-			continue;
+		if (port->both_edges & (1 << irqoffset))
+			mxc_flip_edge(port, irqoffset);
 
-		BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+		generic_handle_irq(gpio_irq_no_base + irqoffset);
 
-		if (port->both_edges & (1 << (gpio & 31)))
-			mxc_flip_edge(port, gpio);
-
-		irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
-				&irq_desc[gpio_irq_no]);
+		irq_stat &= ~(1 << irqoffset);
 	}
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
index 05ff2f3..93cc66f 100644
--- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
+++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
@@ -21,19 +21,19 @@
 /*
  *  KZM-ARM11-01 Board Control Registers on FPGA
  */
-#define KZM_ARM11_CTL1		(CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2		(CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1		(CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT	(CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV	(CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED	(CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS		(CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2	(CS4_BASE_ADDR + 0x1003)
+#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
 
 /*
  * External UART for touch panel on FPGA
  */
-#define KZM_ARM11_16550		(CS4_BASE_ADDR + 0x1050)
+#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
 
 #endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 2cbfa35..095a199 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 
 /* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        IO_ADDRESS(CS4_BASE_ADDR)
+#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
 /* Offsets for the PBC Controller register */
 
 /* PBC Board status register offset */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index d5be6b5..fc5fec9 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -25,6 +25,7 @@
 	MX31NOBOARD	= 0,
 	MX31DEVBOARD	= 1,
 	MX31MARXBOT	= 2,
+	MX31SMARTBOT	= 3,
 };
 
 /*
@@ -34,6 +35,7 @@
 
 extern void mx31moboard_devboard_init(void);
 extern void mx31moboard_marxbot_init(void);
+extern void mx31moboard_smartbot_init(void);
 
 #endif
 
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index 43a82d0..753a598 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -26,13 +26,6 @@
 struct module;
 
 struct clk {
-#ifndef CONFIG_COMMON_CLKDEV
-	/* As soon as i.MX1 and i.MX31 switched to clkdev, this
-	 * block can go away */
-	struct list_head node;
-	struct module *owner;
-	const char *name;
-#endif
 	int id;
 	/* Source clock this clk depends on */
 	struct clk *parent;
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 4bf1068..2941472 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,14 +20,17 @@
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
+extern void mx51_map_io(void);
 extern void mxc91231_map_io(void);
 extern void mxc_init_irq(void __iomem *);
+extern void tzic_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
 extern void mx21_init_irq(void);
 extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
+extern void mx51_init_irq(void);
 extern void mxc91231_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
@@ -36,6 +39,8 @@
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
+extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
+			unsigned long ckih1, unsigned long ckih2);
 extern int mxc91231_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 5a6ae1b..0b6e11e 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  *
  */
+#define IMX_NEEDS_DEPRECATED_SYMBOLS
 
 #ifdef CONFIG_ARCH_MX1
 #include <mach/mx1.h>
@@ -44,13 +45,22 @@
 #define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
 
+#ifdef CONFIG_ARCH_MX5
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mx51.h>
+#define UART_PADDR	MX51_UART1_BASE_ADDR
+#define UART_VADDR	MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR)
+#endif
+
 #ifdef CONFIG_ARCH_MXC91231
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
 #include <mach/mxc91231.h>
 #define UART_PADDR	MXC91231_UART2_BASE_ADDR
-#define UART_VADDR	MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
+#define UART_VADDR	MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
 		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 7cf290e..aeb0869 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -1,6 +1,6 @@
 /*
  *  Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
  */
 
 /*
@@ -18,11 +18,16 @@
 	.endm
 
 	.macro  get_irqnr_preamble, base, tmp
+#ifndef CONFIG_MXC_TZIC
 	ldr	\base, =avic_base
 	ldr	\base, [\base]
 #ifdef CONFIG_MXC_IRQ_PRIOR
 	ldr	r4, [\base, #AVIC_NIMASK]
 #endif
+#elif defined CONFIG_MXC_TZIC
+	ldr	\base, =tzic_base
+	ldr	\base, [\base]
+#endif /* CONFIG_MXC_TZIC */
 	.endm
 
 	.macro  arch_ret_to_user, tmp1, tmp2
@@ -32,6 +37,7 @@
 	@ and returns its number in irqnr
 	@ and returns if an interrupt occured in irqstat
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+#ifndef CONFIG_MXC_TZIC
 	@ Load offset & priority of the highest priority
 	@ interrupt pending from AVIC_NIVECSR
 	ldr	\irqstat, [\base, #0x40]
@@ -45,6 +51,32 @@
 	strne	\tmp, [\base, #AVIC_NIMASK]
 	streq	r4, [\base, #AVIC_NIMASK]
 #endif
+#elif defined CONFIG_MXC_TZIC
+	@ Load offset & priority of the highest priority
+	@ interrupt pending.
+	@ 0xD80 is HIPND0 register
+	mov     \irqnr, #0
+	mov     \irqstat, #0x0D80
+1000:
+	ldr     \tmp,   [\irqstat, \base]
+	cmp     \tmp, #0
+	bne     1001f
+	addeq   \irqnr, \irqnr, #32
+	addeq   \irqstat, \irqstat, #4
+	cmp     \irqnr, #128
+	blo     1000b
+	b       2001f
+1001:	mov     \irqstat, #1
+1002:	tst     \tmp, \irqstat
+	bne     2002f
+	movs    \tmp, \tmp, lsr #1
+	addne   \irqnr, \irqnr, #1
+	bne     1002b
+2001:
+	mov  \irqnr, #0
+2002:
+	movs \irqnr, \irqnr
+#endif
 	.endm
 
 	@ irq priority table (not used)
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 78db754..ebadf4a 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -22,6 +22,15 @@
 
 #include <asm/sizes.h>
 
+#define IMX_IO_ADDRESS(addr, module)					\
+	((void __force __iomem *)					\
+	 (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\
+	 (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
+
+#ifdef CONFIG_ARCH_MX5
+#include <mach/mx51.h>
+#endif
+
 #ifdef CONFIG_ARCH_MX3
 #include <mach/mx3x.h>
 #include <mach/mx31.h>
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
index bf23305..6b1507c 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
@@ -1,166 +1,155 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX1_H__
+#define __MACH_IOMUX_MX1_H__
 
-#ifndef _MXC_IOMUX_MX1_H
-#define _MXC_IOMUX_MX1_H
+#include <mach/iomux-v1.h>
 
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
+#define PA0_AIN_SPI2_CLK	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA0_AF_ETMTRACESYNC	(GPIO_PORTA | GPIO_AF | 0)
+#define PA1_AOUT_SPI2_RXD	(GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
+#define PA1_PF_TIN		(GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_PWM0		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
+#define PA3_PF_CSI_MCLK		(GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_CSI_D0		(GPIO_PORTA | GPIO_PF | 4)
+#define PA5_PF_CSI_D1		(GPIO_PORTA | GPIO_PF | 5)
+#define PA6_PF_CSI_D2		(GPIO_PORTA | GPIO_PF | 6)
+#define PA7_PF_CSI_D3		(GPIO_PORTA | GPIO_PF | 7)
+#define PA8_PF_CSI_D4		(GPIO_PORTA | GPIO_PF | 8)
+#define PA9_PF_CSI_D5		(GPIO_PORTA | GPIO_PF | 9)
+#define PA10_PF_CSI_D6		(GPIO_PORTA | GPIO_PF | 10)
+#define PA11_PF_CSI_D7		(GPIO_PORTA | GPIO_PF | 11)
+#define PA12_PF_CSI_VSYNC	(GPIO_PORTA | GPIO_PF | 12)
+#define PA13_PF_CSI_HSYNC	(GPIO_PORTA | GPIO_PF | 13)
+#define PA14_PF_CSI_PIXCLK	(GPIO_PORTA | GPIO_PF | 14)
+#define PA15_PF_I2C_SDA		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_I2C_SCL		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_AF_ETMTRACEPKT4	(GPIO_PORTA | GPIO_AF | 17)
+#define PA17_AIN_SPI2_SS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA18_AF_ETMTRACEPKT5	(GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_ETMTRACEPKT6	(GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_ETMTRACEPKT7	(GPIO_PORTA | GPIO_AF | 20)
+#define PA21_PF_A0		(GPIO_PORTA | GPIO_PF | 21)
+#define PA22_PF_CS4		(GPIO_PORTA | GPIO_PF | 22)
+#define PA23_PF_CS5		(GPIO_PORTA | GPIO_PF | 23)
+#define PA24_PF_A16		(GPIO_PORTA | GPIO_PF | 24)
+#define PA24_AF_ETMTRACEPKT0	(GPIO_PORTA | GPIO_AF | 24)
+#define PA25_PF_A17		(GPIO_PORTA | GPIO_PF | 25)
+#define PA25_AF_ETMTRACEPKT1	(GPIO_PORTA | GPIO_AF | 25)
+#define PA26_PF_A18		(GPIO_PORTA | GPIO_PF | 26)
+#define PA26_AF_ETMTRACEPKT2	(GPIO_PORTA | GPIO_AF | 26)
+#define PA27_PF_A19		(GPIO_PORTA | GPIO_PF | 27)
+#define PA27_AF_ETMTRACEPKT3	(GPIO_PORTA | GPIO_AF | 27)
+#define PA28_PF_A20		(GPIO_PORTA | GPIO_PF | 28)
+#define PA28_AF_ETMPIPESTAT0	(GPIO_PORTA | GPIO_AF | 28)
+#define PA29_PF_A21		(GPIO_PORTA | GPIO_PF | 29)
+#define PA29_AF_ETMPIPESTAT1	(GPIO_PORTA | GPIO_AF | 29)
+#define PA30_PF_A22		(GPIO_PORTA | GPIO_PF | 30)
+#define PA30_AF_ETMPIPESTAT2	(GPIO_PORTA | GPIO_AF | 30)
+#define PA31_PF_A23		(GPIO_PORTA | GPIO_PF | 31)
+#define PA31_AF_ETMTRACECLK	(GPIO_PORTA | GPIO_AF | 31)
+#define PB8_PF_SD_DAT0		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
+#define PB8_AF_MS_PIO		(GPIO_PORTB | GPIO_AF | 8)
+#define PB9_PF_SD_DAT1		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
+#define PB9_AF_MS_PI1		(GPIO_PORTB | GPIO_AF | 9)
+#define PB10_PF_SD_DAT2		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
+#define PB10_AF_MS_SCLKI	(GPIO_PORTB | GPIO_AF | 10)
+#define PB11_PF_SD_DAT3		(GPIO_PORTB | GPIO_PF | 11)
+#define PB11_AF_MS_SDIO		(GPIO_PORTB | GPIO_AF | 11)
+#define PB12_PF_SD_CLK		(GPIO_PORTB | GPIO_PF | 12)
+#define PB12_AF_MS_SCLK0	(GPIO_PORTB | GPIO_AF | 12)
+#define PB13_PF_SD_CMD		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
+#define PB13_AF_MS_BS		(GPIO_PORTB | GPIO_AF | 13)
+#define PB14_AF_SSI_RXFS	(GPIO_PORTB | GPIO_AF | 14)
+#define PB15_AF_SSI_RXCLK	(GPIO_PORTB | GPIO_AF | 15)
+#define PB16_AF_SSI_RXDAT	(GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
+#define PB17_AF_SSI_TXDAT	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
+#define PB18_AF_SSI_TXFS	(GPIO_PORTB | GPIO_AF | 18)
+#define PB19_AF_SSI_TXCLK	(GPIO_PORTB | GPIO_AF | 19)
+#define PB20_PF_USBD_AFE	(GPIO_PORTB | GPIO_PF | 20)
+#define PB21_PF_USBD_OE		(GPIO_PORTB | GPIO_PF | 21)
+#define PB22_PF_USBD_RCV	(GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USBD_SUSPND	(GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USBD_VP		(GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBD_VM		(GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBD_VPO	(GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBD_VMO	(GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_UART2_CTS	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
+#define PB29_PF_UART2_RTS	(GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
+#define PB30_PF_UART2_TXD	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
+#define PB31_PF_UART2_RXD	(GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
+#define PC3_PF_SSI_RXFS		(GPIO_PORTC | GPIO_PF | 3)
+#define PC4_PF_SSI_RXCLK	(GPIO_PORTC | GPIO_PF | 4)
+#define PC5_PF_SSI_RXDAT	(GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_SSI_TXDAT	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
+#define PC7_PF_SSI_TXFS		(GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_SSI_TXCLK	(GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_UART1_CTS	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_UART1_RTS	(GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
+#define PC11_PF_UART1_TXD	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_UART1_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
+#define PC13_PF_SPI1_SPI_RDY	(GPIO_PORTC | GPIO_PF | 13)
+#define PC14_PF_SPI1_SCLK	(GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_SPI1_SS		(GPIO_PORTC | GPIO_PF | 15)
+#define PC16_PF_SPI1_MISO	(GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SPI1_MOSI	(GPIO_PORTC | GPIO_PF | 17)
+#define PC24_BIN_UART3_RI	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
+#define PC25_BIN_UART3_DSR	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
+#define PC26_AOUT_UART3_DTR	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
+#define PC28_BIN_UART3_CTS	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
+#define PC29_AOUT_UART3_RTS	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX	(GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
+#define PD6_PF_LSCLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
+#define PD7_PF_REV		(GPIO_PORTD | GPIO_PF | 7)
+#define PD7_AF_UART2_DTR	(GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
+#define PD7_AIN_SPI2_SCLK	(GPIO_PORTD | GPIO_AIN | 7)
+#define PD8_PF_CLS		(GPIO_PORTD | GPIO_PF | 8)
+#define PD8_AF_UART2_DCD	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
+#define PD8_AIN_SPI2_SS		(GPIO_PORTD | GPIO_AIN | 8)
+#define PD9_PF_PS		(GPIO_PORTD | GPIO_PF | 9)
+#define PD9_AF_UART2_RI		(GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
+#define PD9_AOUT_SPI2_RXD	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
+#define PD10_PF_SPL_SPR		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
+#define PD10_AF_UART2_DSR	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
+#define PD10_AIN_SPI2_TXD	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
+#define PD11_PF_CONTRAST	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
+#define PD12_PF_ACD_OE		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
+#define PD13_PF_LP_HSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
+#define PD14_PF_FLM_VSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
+#define PD15_PF_LD0		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
+#define PD16_PF_LD1		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
+#define PD17_PF_LD2		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_LD3		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_LD4		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_LD5		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_LD6		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_LD7		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_LD8		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
+#define PD24_PF_LD9		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
+#define PD25_PF_LD10		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_LD11		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_LD12		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_LD13		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_LD14		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_LD15		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
+#define PD31_PF_TMR2OUT		(GPIO_PORTD | GPIO_PF | 31)
+#define PD31_BIN_SPI2_TXD	(GPIO_PORTD | GPIO_BIN | 31)
 
-/* FIXME: This list is not completed. The correct directions are
-* missing on some (many) pins
-*/
-
-
-/* Primary GPIO pin functions */
-
-#define PA0_AIN_SPI2_CLK        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC     (GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD       (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
-#define PA1_PF_TIN              (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
-#define PA3_PF_CSI_MCLK         (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0           (GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1           (GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2           (GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3           (GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4           (GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5           (GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6          (GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7          (GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC       (GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC       (GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK      (GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_I2C_SCL         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_AF_ETMTRACEPKT4    (GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5    (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6    (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7    (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0              (GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4             (GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5             (GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16             (GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0    (GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17             (GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1    (GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18             (GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2    (GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19             (GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3    (GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20             (GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0    (GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21             (GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1    (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22             (GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2    (GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23             (GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK     (GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO           (GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
-#define PB9_AF_MS_PI1           (GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2         (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
-#define PB10_AF_MS_SCLKI        (GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3         (GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO         (GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK          (GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0        (GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS           (GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS        (GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK       (GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT       (GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
-#define PB17_AF_SSI_TXDAT       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
-#define PB18_AF_SSI_TXFS        (GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK       (GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE        (GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE         (GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PF_USBD_RCV        (GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND     (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP         (GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM         (GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO        (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO        (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
-#define PB29_PF_UART2_RTS       (GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
-#define PB30_PF_UART2_TXD       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
-#define PB31_PF_UART2_RXD       (GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
-#define PC3_PF_SSI_RXFS         (GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK        (GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT        (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_SSI_TXDAT        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
-#define PC7_PF_SSI_TXFS         (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK        (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_UART1_RTS       (GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
-#define PC11_PF_UART1_TXD       (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_UART1_RXD       (GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
-#define PC13_PF_SPI1_SPI_RDY    (GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK       (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS         (GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO       (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI       (GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI       (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
-#define PC25_BIN_UART3_DSR      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
-#define PC26_AOUT_UART3_DTR     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
-#define PC28_BIN_UART3_CTS      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
-#define PC29_AOUT_UART3_RTS     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX       (GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
-#define PD6_PF_LSCLK            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
-#define PD7_PF_REV              (GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR        (GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
-#define PD7_AIN_SPI2_SCLK       (GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS              (GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD        (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
-#define PD8_AIN_SPI2_SS         (GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS               (GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI         (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
-#define PD9_AOUT_SPI2_RXD       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
-#define PD10_AF_UART2_DSR       (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
-#define PD10_AIN_SPI2_TXD       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
-#define PD12_PF_ACD_OE          (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
-#define PD13_PF_LP_HSYNC        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
-#define PD14_PF_FLM_VSYNC       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
-#define PD15_PF_LD0             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
-#define PD16_PF_LD1             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
-#define PD17_PF_LD2             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_LD3             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_LD4             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
-#define PD20_PF_LD5             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
-#define PD21_PF_LD6             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
-#define PD22_PF_LD7             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
-#define PD23_PF_LD8             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
-#define PD24_PF_LD9             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
-#define PD25_PF_LD10            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_LD11            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_LD12            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_LD13            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_LD14            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_LD15            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
-#define PD31_PF_TMR2OUT         (GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD       (GPIO_PORTD | GPIO_BIN | 31)
-
-
-#endif
+#endif /* ifndef __MACH_IOMUX_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
index 63aaa97..1495dfd 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx21.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
@@ -1,126 +1,122 @@
 /*
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX21_H__
+#define __MACH_IOMUX_MX21_H__
 
-#ifndef _MXC_IOMUX_MX21_H
-#define _MXC_IOMUX_MX21_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+#include <mach/iomux-mx2x.h>
+#include <mach/iomux-v1.h>
 
 /* Primary GPIO pin functions */
 
-#define PB22_PF_USBH1_BYP       (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_ON        (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_USBOTG_SDA       (GPIO_PORTC | GPIO_PF | 5)
-#define PC6_PF_USBOTG_SCL       (GPIO_PORTC | GPIO_PF | 6)
-#define PC7_PF_USBOTG_ON        (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_USBOTG_FS        (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_USBOTG_OE        (GPIO_PORTC | GPIO_PF | 9)
-#define PC10_PF_USBOTG_TXDM     (GPIO_PORTC | GPIO_PF | 10)
-#define PC11_PF_USBOTG_TXDP     (GPIO_PORTC | GPIO_PF | 11)
-#define PC12_PF_USBOTG_RXDM     (GPIO_PORTC | GPIO_PF | 12)
-#define PC13_PF_USBOTG_RXDP     (GPIO_PORTC | GPIO_PF | 13)
-#define PC16_PF_SAP_FS          (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SAP_RXD         (GPIO_PORTC | GPIO_PF | 17)
-#define PC18_PF_SAP_TXD         (GPIO_PORTC | GPIO_PF | 18)
-#define PC19_PF_SAP_CLK         (GPIO_PORTC | GPIO_PF | 19)
-#define PE0_PF_TEST_WB2         (GPIO_PORTE | GPIO_PF | 0)
-#define PE1_PF_TEST_WB1         (GPIO_PORTE | GPIO_PF | 1)
-#define PE2_PF_TEST_WB0         (GPIO_PORTE | GPIO_PF | 2)
-#define PF1_PF_NFCE             (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_NFIO0            (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_NFIO1            (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_NFIO2            (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_NFIO3           (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_NFIO4           (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_NFIO5           (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_NFIO6           (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_NFIO7           (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_RES             (GPIO_PORTF | GPIO_PF | 16)
+#define PB22_PF_USBH1_BYP	(GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_ON	(GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_USBOTG_SDA	(GPIO_PORTC | GPIO_PF | 5)
+#define PC6_PF_USBOTG_SCL	(GPIO_PORTC | GPIO_PF | 6)
+#define PC7_PF_USBOTG_ON	(GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_USBOTG_FS	(GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_USBOTG_OE	(GPIO_PORTC | GPIO_PF | 9)
+#define PC10_PF_USBOTG_TXDM	(GPIO_PORTC | GPIO_PF | 10)
+#define PC11_PF_USBOTG_TXDP	(GPIO_PORTC | GPIO_PF | 11)
+#define PC12_PF_USBOTG_RXDM	(GPIO_PORTC | GPIO_PF | 12)
+#define PC13_PF_USBOTG_RXDP	(GPIO_PORTC | GPIO_PF | 13)
+#define PC16_PF_SAP_FS		(GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SAP_RXD		(GPIO_PORTC | GPIO_PF | 17)
+#define PC18_PF_SAP_TXD		(GPIO_PORTC | GPIO_PF | 18)
+#define PC19_PF_SAP_CLK		(GPIO_PORTC | GPIO_PF | 19)
+#define PE0_PF_TEST_WB2		(GPIO_PORTE | GPIO_PF | 0)
+#define PE1_PF_TEST_WB1		(GPIO_PORTE | GPIO_PF | 1)
+#define PE2_PF_TEST_WB0		(GPIO_PORTE | GPIO_PF | 2)
+#define PF1_PF_NFCE		(GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCLE		(GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_NFIO0		(GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_NFIO1		(GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_NFIO2		(GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_NFIO3		(GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_NFIO4		(GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_NFIO5		(GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_NFIO6		(GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_NFIO7		(GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_RES		(GPIO_PORTF | GPIO_PF | 16)
 
 /* Alternate GPIO pin functions */
 
-#define PA5_AF_BMI_CLK_CS       (GPIO_PORTA | GPIO_AF | 5)
-#define PA6_AF_BMI_D0           (GPIO_PORTA | GPIO_AF | 6)
-#define PA7_AF_BMI_D1           (GPIO_PORTA | GPIO_AF | 7)
-#define PA8_AF_BMI_D2           (GPIO_PORTA | GPIO_AF | 8)
-#define PA9_AF_BMI_D3           (GPIO_PORTA | GPIO_AF | 9)
-#define PA10_AF_BMI_D4          (GPIO_PORTA | GPIO_AF | 10)
-#define PA11_AF_BMI_D5          (GPIO_PORTA | GPIO_AF | 11)
-#define PA12_AF_BMI_D6          (GPIO_PORTA | GPIO_AF | 12)
-#define PA13_AF_BMI_D7          (GPIO_PORTA | GPIO_AF | 13)
-#define PA14_AF_BMI_D8          (GPIO_PORTA | GPIO_AF | 14)
-#define PA15_AF_BMI_D9          (GPIO_PORTA | GPIO_AF | 15)
-#define PA16_AF_BMI_D10         (GPIO_PORTA | GPIO_AF | 16)
-#define PA17_AF_BMI_D11         (GPIO_PORTA | GPIO_AF | 17)
-#define PA18_AF_BMI_D12         (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_BMI_D13         (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_BMI_D14         (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_AF_BMI_D15         (GPIO_PORTA | GPIO_AF | 21)
-#define PA22_AF_BMI_READ_REQ    (GPIO_PORTA | GPIO_AF | 22)
-#define PA23_AF_BMI_WRITE       (GPIO_PORTA | GPIO_AF | 23)
-#define PA29_AF_BMI_RX_FULL     (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_AF_BMI_READ        (GPIO_PORTA | GPIO_AF | 30)
+#define PA5_AF_BMI_CLK_CS	(GPIO_PORTA | GPIO_AF | 5)
+#define PA6_AF_BMI_D0		(GPIO_PORTA | GPIO_AF | 6)
+#define PA7_AF_BMI_D1		(GPIO_PORTA | GPIO_AF | 7)
+#define PA8_AF_BMI_D2		(GPIO_PORTA | GPIO_AF | 8)
+#define PA9_AF_BMI_D3		(GPIO_PORTA | GPIO_AF | 9)
+#define PA10_AF_BMI_D4		(GPIO_PORTA | GPIO_AF | 10)
+#define PA11_AF_BMI_D5		(GPIO_PORTA | GPIO_AF | 11)
+#define PA12_AF_BMI_D6		(GPIO_PORTA | GPIO_AF | 12)
+#define PA13_AF_BMI_D7		(GPIO_PORTA | GPIO_AF | 13)
+#define PA14_AF_BMI_D8		(GPIO_PORTA | GPIO_AF | 14)
+#define PA15_AF_BMI_D9		(GPIO_PORTA | GPIO_AF | 15)
+#define PA16_AF_BMI_D10		(GPIO_PORTA | GPIO_AF | 16)
+#define PA17_AF_BMI_D11		(GPIO_PORTA | GPIO_AF | 17)
+#define PA18_AF_BMI_D12		(GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_BMI_D13		(GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_BMI_D14		(GPIO_PORTA | GPIO_AF | 20)
+#define PA21_AF_BMI_D15		(GPIO_PORTA | GPIO_AF | 21)
+#define PA22_AF_BMI_READ_REQ	(GPIO_PORTA | GPIO_AF | 22)
+#define PA23_AF_BMI_WRITE	(GPIO_PORTA | GPIO_AF | 23)
+#define PA29_AF_BMI_RX_FULL	(GPIO_PORTA | GPIO_AF | 29)
+#define PA30_AF_BMI_READ	(GPIO_PORTA | GPIO_AF | 30)
 
 /* AIN GPIO pin functions */
 
-#define PC14_AIN_SYS_CLK        (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PD21_AIN_USBH2_FS       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
-#define PD22_AIN_USBH2_OE       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
-#define PD23_AIN_USBH2_TXDM     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
-#define PD24_AIN_USBH2_TXDP     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
-#define PE8_AIN_IR_TXD          (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
-#define PF0_AIN_PC_RST          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
-#define PF1_AIN_PC_CE1          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
-#define PF2_AIN_PC_CE2          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
-#define PF3_AIN_PC_POE          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
-#define PF4_AIN_PC_OE           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
-#define PF5_AIN_PC_RW           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
+#define PC14_AIN_SYS_CLK	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PD21_AIN_USBH2_FS	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
+#define PD22_AIN_USBH2_OE	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
+#define PD23_AIN_USBH2_TXDM	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
+#define PD24_AIN_USBH2_TXDP	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
+#define PE8_AIN_IR_TXD		(GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
+#define PF0_AIN_PC_RST		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
+#define PF1_AIN_PC_CE1		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
+#define PF2_AIN_PC_CE2		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
+#define PF3_AIN_PC_POE		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
+#define PF4_AIN_PC_OE		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
+#define PF5_AIN_PC_RW		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
 
 /* BIN GPIO pin functions */
 
-#define PC14_BIN_SYS_CLK        (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
-#define PD27_BIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
+#define PC14_BIN_SYS_CLK	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PD27_BIN_EXT_DMA_GRANT	(GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
 
 /* CIN GPIO pin functions */
 
-#define PB26_CIN_USBH1_RXDAT    (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
+#define PB26_CIN_USBH1_RXDAT	(GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
 
 /* AOUT GPIO pin functions */
 
-#define PA29_AOUT_BMI_WAIT      (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
-#define PD19_AOUT_USBH2_RXDM    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
-#define PD20_AOUT_USBH2_RXDP    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
-#define PD25_AOUT_EXT_DMAREQ    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
-#define PD26_AOUT_USBOTG_RXDAT  (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
-#define PE9_AOUT_IR_RXD         (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
-#define PF6_AOUT_PC_BVD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
-#define PF7_AOUT_PC_BVD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
-#define PF8_AOUT_PC_VS2         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
-#define PF9_AOUT_PC_VS1         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
-#define PF10_AOUT_PC_WP         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
-#define PF11_AOUT_PC_READY      (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
-#define PF12_AOUT_PC_WAIT       (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
-#define PF13_AOUT_PC_CD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
-#define PF14_AOUT_PC_CD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
+#define PA29_AOUT_BMI_WAIT	(GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
+#define PD19_AOUT_USBH2_RXDM	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
+#define PD20_AOUT_USBH2_RXDP	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
+#define PD25_AOUT_EXT_DMAREQ	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
+#define PD26_AOUT_USBOTG_RXDAT	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
+#define PE9_AOUT_IR_RXD		(GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
+#define PF6_AOUT_PC_BVD2	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
+#define PF7_AOUT_PC_BVD1	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
+#define PF8_AOUT_PC_VS2		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
+#define PF9_AOUT_PC_VS1		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
+#define PF10_AOUT_PC_WP		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
+#define PF11_AOUT_PC_READY	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
+#define PF12_AOUT_PC_WAIT	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
+#define PF13_AOUT_PC_CD2	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
+#define PF14_AOUT_PC_CD1	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
 
-
-#endif
+#endif /* ifndef __MACH_IOMUX_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index 9af494f..f39220d 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -7,7 +7,7 @@
  *    Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
  * and
  * arch/arm/plat-mxc/include/mach/iomux-mx35.h
- *    Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *    Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
@@ -16,24 +16,11 @@
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
  */
-#ifndef __IOMUX_MX25_H__
-#define __IOMUX_MX25_H__
+#ifndef __MACH_IOMUX_MX25_H__
+#define __MACH_IOMUX_MX25_H__
 
 #include <mach/iomux-v3.h>
 
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
-/*
- *
- * @brief MX25 I/O Pin List
- *
- * @ingroup GPIO_MX25
- */
-
-#ifndef __ASSEMBLY__
-
 /*
  * IOMUX/PAD Bit field definitions
  */
@@ -462,9 +449,11 @@
 #define MX25_PAD_GPIO_C__CAN2_TX	IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
 
 #define MX25_PAD_GPIO_D__GPIO_D		IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_E__LD16		IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_GPIO_D__CAN2_RX	IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
 
 #define MX25_PAD_GPIO_E__GPIO_E		IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_F__LD17		IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_GPIO_E__AUD7_TXD	IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_GPIO_F__GPIO_F		IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
@@ -513,5 +502,4 @@
 #define MX25_PAD_CTL_GRP_DVS_SDHC1	IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CTL_GRP_DVS_LCD	IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
 
-#endif // __ASSEMBLY__
-#endif // __IOMUX_MX25_H__
+#endif /* __MACH_IOMUX_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
index 5ac158b..d9f9a6e 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx27.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
@@ -1,207 +1,205 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX27_H__
+#define __MACH_IOMUX_MX27_H__
 
-#ifndef _MXC_IOMUX_MX27_H
-#define _MXC_IOMUX_MX27_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+#include <mach/iomux-mx2x.h>
+#include <mach/iomux-v1.h>
 
 /* Primary GPIO pin functions */
 
-#define PA0_PF_USBH2_CLK        (GPIO_PORTA | GPIO_PF | 0)
-#define PA1_PF_USBH2_DIR        (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_USBH2_DATA7      (GPIO_PORTA | GPIO_PF | 2)
-#define PA3_PF_USBH2_NXT        (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_USBH2_STP        (GPIO_PORTA | GPIO_PF | 4)
-#define PB22_PF_USBH1_SUSP      (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_RCV       (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_I2C2_SDA         (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_I2C2_SCL         (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
-#define PC7_PF_USBOTG_DATA5     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
-#define PC8_PF_USBOTG_DATA6     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
-#define PC9_PF_USBOTG_DATA0     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_USBOTG_DATA2    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
-#define PC11_PF_USBOTG_DATA1    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_USBOTG_DATA4    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
-#define PC13_PF_USBOTG_DATA3    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
-#define PC16_PF_SSI4_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
-#define PC17_PF_SSI4_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
-#define PC18_PF_SSI4_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
-#define PC19_PF_SSI4_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
-#define PC25_AF_GPT5_TIN        (GPIO_PORTC | GPIO_AF | 25)
-#define PC27_AF_GPT4_TIN        (GPIO_PORTC | GPIO_AF | 27)
-#define PD0_PF_SD3_CMD          (GPIO_PORTD | GPIO_PF | 0)
-#define PD1_PF_SD3_CLK          (GPIO_PORTD | GPIO_PF | 1)
-#define PD2_PF_ATA_DATA0        (GPIO_PORTD | GPIO_PF | 2)
-#define PD3_PF_ATA_DATA1        (GPIO_PORTD | GPIO_PF | 3)
-#define PD4_PF_ATA_DATA2        (GPIO_PORTD | GPIO_PF | 4)
-#define PD5_PF_ATA_DATA3        (GPIO_PORTD | GPIO_PF | 5)
-#define PD6_PF_ATA_DATA4        (GPIO_PORTD | GPIO_PF | 6)
-#define PD7_PF_ATA_DATA5        (GPIO_PORTD | GPIO_PF | 7)
-#define PD8_PF_ATA_DATA6        (GPIO_PORTD | GPIO_PF | 8)
-#define PD9_PF_ATA_DATA7        (GPIO_PORTD | GPIO_PF | 9)
-#define PD10_PF_ATA_DATA8       (GPIO_PORTD | GPIO_PF | 10)
-#define PD11_PF_ATA_DATA9       (GPIO_PORTD | GPIO_PF | 11)
-#define PD12_PF_ATA_DATA10      (GPIO_PORTD | GPIO_PF | 12)
-#define PD13_PF_ATA_DATA11      (GPIO_PORTD | GPIO_PF | 13)
-#define PD14_PF_ATA_DATA12      (GPIO_PORTD | GPIO_PF | 14)
-#define PD15_PF_ATA_DATA13      (GPIO_PORTD | GPIO_PF | 15)
-#define PD16_PF_ATA_DATA14      (GPIO_PORTD | GPIO_PF | 16)
-#define PE0_PF_USBOTG_NXT       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
-#define PE1_PF_USBOTG_STP       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
-#define PE2_PF_USBOTG_DIR       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
-#define PE24_PF_USBOTG_CLK      (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
-#define PE25_PF_USBOTG_DATA7    (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
-#define PF1_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCE             (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_PC_POE           (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_PC_RW            (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_PC_IOIS16        (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_PC_RST          (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_PC_BVD2         (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_PC_BVD1         (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_PC_VS2          (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_PC_VS1          (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_PC_PWRON        (GPIO_PORTF | GPIO_PF | 16)
-#define PF17_PF_PC_READY        (GPIO_PORTF | GPIO_PF | 17)
-#define PF18_PF_PC_WAIT         (GPIO_PORTF | GPIO_PF | 18)
-#define PF19_PF_PC_CD2          (GPIO_PORTF | GPIO_PF | 19)
-#define PF20_PF_PC_CD1          (GPIO_PORTF | GPIO_PF | 20)
-#define PF23_PF_ATA_DATA15      (GPIO_PORTF | GPIO_PF | 23)
+#define PA0_PF_USBH2_CLK	(GPIO_PORTA | GPIO_PF | 0)
+#define PA1_PF_USBH2_DIR	(GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_USBH2_DATA7	(GPIO_PORTA | GPIO_PF | 2)
+#define PA3_PF_USBH2_NXT	(GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_USBH2_STP	(GPIO_PORTA | GPIO_PF | 4)
+#define PB22_PF_USBH1_SUSP	(GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_RCV	(GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_I2C2_SDA		(GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_I2C2_SCL		(GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
+#define PC7_PF_USBOTG_DATA5	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
+#define PC8_PF_USBOTG_DATA6	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
+#define PC9_PF_USBOTG_DATA0	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_USBOTG_DATA2	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
+#define PC11_PF_USBOTG_DATA1	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_USBOTG_DATA4	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
+#define PC13_PF_USBOTG_DATA3	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
+#define PC16_PF_SSI4_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
+#define PC17_PF_SSI4_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
+#define PC18_PF_SSI4_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
+#define PC19_PF_SSI4_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
+#define PD0_PF_SD3_CMD		(GPIO_PORTD | GPIO_PF | 0)
+#define PD1_PF_SD3_CLK		(GPIO_PORTD | GPIO_PF | 1)
+#define PD2_PF_ATA_DATA0	(GPIO_PORTD | GPIO_PF | 2)
+#define PD3_PF_ATA_DATA1	(GPIO_PORTD | GPIO_PF | 3)
+#define PD4_PF_ATA_DATA2	(GPIO_PORTD | GPIO_PF | 4)
+#define PD5_PF_ATA_DATA3	(GPIO_PORTD | GPIO_PF | 5)
+#define PD6_PF_ATA_DATA4	(GPIO_PORTD | GPIO_PF | 6)
+#define PD7_PF_ATA_DATA5	(GPIO_PORTD | GPIO_PF | 7)
+#define PD8_PF_ATA_DATA6	(GPIO_PORTD | GPIO_PF | 8)
+#define PD9_PF_ATA_DATA7	(GPIO_PORTD | GPIO_PF | 9)
+#define PD10_PF_ATA_DATA8	(GPIO_PORTD | GPIO_PF | 10)
+#define PD11_PF_ATA_DATA9	(GPIO_PORTD | GPIO_PF | 11)
+#define PD12_PF_ATA_DATA10	(GPIO_PORTD | GPIO_PF | 12)
+#define PD13_PF_ATA_DATA11	(GPIO_PORTD | GPIO_PF | 13)
+#define PD14_PF_ATA_DATA12	(GPIO_PORTD | GPIO_PF | 14)
+#define PD15_PF_ATA_DATA13	(GPIO_PORTD | GPIO_PF | 15)
+#define PD16_PF_ATA_DATA14	(GPIO_PORTD | GPIO_PF | 16)
+#define PE0_PF_USBOTG_NXT	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
+#define PE1_PF_USBOTG_STP	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
+#define PE2_PF_USBOTG_DIR	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
+#define PE24_PF_USBOTG_CLK	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
+#define PE25_PF_USBOTG_DATA7	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
+#define PF1_PF_NFCLE		(GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCE		(GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_PC_POE		(GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_PC_RW		(GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_PC_IOIS16	(GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_PC_RST		(GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_PC_BVD2		(GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_PC_BVD1		(GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_PC_VS2		(GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_PC_VS1		(GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_PC_PWRON	(GPIO_PORTF | GPIO_PF | 16)
+#define PF17_PF_PC_READY	(GPIO_PORTF | GPIO_PF | 17)
+#define PF18_PF_PC_WAIT		(GPIO_PORTF | GPIO_PF | 18)
+#define PF19_PF_PC_CD2		(GPIO_PORTF | GPIO_PF | 19)
+#define PF20_PF_PC_CD1		(GPIO_PORTF | GPIO_PF | 20)
+#define PF23_PF_ATA_DATA15	(GPIO_PORTF | GPIO_PF | 23)
 
 /* Alternate GPIO pin functions */
 
-#define PB4_AF_MSHC_DATA0       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
-#define PB5_AF_MSHC_DATA1       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
-#define PB6_AF_MSHC_DATA2       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
-#define PB7_AF_MSHC_DATA4       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
-#define PB8_AF_MSHC_BS          (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
-#define PB9_AF_MSHC_SCLK        (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
-#define PB10_AF_UART6_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
-#define PB11_AF_UART6_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
-#define PB12_AF_UART6_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
-#define PB13_AF_UART6_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
-#define PB18_AF_UART5_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
-#define PB19_AF_UART5_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
-#define PB20_AF_UART5_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
-#define PB21_AF_UART5_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
-#define PC8_AF_FEC_MDIO         (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
-#define PC24_AF_GPT5_TOUT       (GPIO_PORTC | GPIO_AF | 24)
-#define PC26_AF_GPT4_TOUT       (GPIO_PORTC | GPIO_AF | 26)
-#define PD1_AF_ETMTRACE_PKT15   (GPIO_PORTD | GPIO_AF | 1)
-#define PD6_AF_ETMTRACE_PKT14   (GPIO_PORTD | GPIO_AF | 6)
-#define PD7_AF_ETMTRACE_PKT13   (GPIO_PORTD | GPIO_AF | 7)
-#define PD9_AF_ETMTRACE_PKT12   (GPIO_PORTD | GPIO_AF | 9)
-#define PD2_AF_SD3_D0           (GPIO_PORTD | GPIO_AF | 2)
-#define PD3_AF_SD3_D1           (GPIO_PORTD | GPIO_AF | 3)
-#define PD4_AF_SD3_D2           (GPIO_PORTD | GPIO_AF | 4)
-#define PD5_AF_SD3_D3           (GPIO_PORTD | GPIO_AF | 5)
-#define PD8_AF_FEC_MDIO         (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
-#define PD10_AF_ETMTRACE_PKT11  (GPIO_PORTD | GPIO_AF | 10)
-#define PD11_AF_ETMTRACE_PKT10  (GPIO_PORTD | GPIO_AF | 11)
-#define PD12_AF_ETMTRACE_PKT9   (GPIO_PORTD | GPIO_AF | 12)
-#define PD13_AF_ETMTRACE_PKT8   (GPIO_PORTD | GPIO_AF | 13)
-#define PD14_AF_ETMTRACE_PKT7   (GPIO_PORTD | GPIO_AF | 14)
-#define PD15_AF_ETMTRACE_PKT6   (GPIO_PORTD | GPIO_AF | 15)
-#define PD16_AF_ETMTRACE_PKT5   (GPIO_PORTD | GPIO_AF | 16)
-#define PF1_AF_ETMTRACE_PKT0    (GPIO_PORTF | GPIO_AF | 1)
-#define PF3_AF_ETMTRACE_PKT2    (GPIO_PORTF | GPIO_AF | 3)
-#define PF5_AF_ETMPIPESTAT11    (GPIO_PORTF | GPIO_AF | 5)
-#define PF7_AF_ATA_BUFFER_EN    (GPIO_PORTF | GPIO_AF | 7)
-#define PF8_AF_ATA_IORDY        (GPIO_PORTF | GPIO_AF | 8)
-#define PF9_AF_ATA_INTRQ        (GPIO_PORTF | GPIO_AF | 9)
-#define PF10_AF_ATA_RESET       (GPIO_PORTF | GPIO_AF | 10)
-#define PF11_AF_ATA_DMACK       (GPIO_PORTF | GPIO_AF | 11)
-#define PF12_AF_ATA_DMAREQ      (GPIO_PORTF | GPIO_AF | 12)
-#define PF13_AF_ATA_DA0         (GPIO_PORTF | GPIO_AF | 13)
-#define PF14_AF_ATA_DA1         (GPIO_PORTF | GPIO_AF | 14)
-#define PF15_AF_ETMTRACE_SYNC   (GPIO_PORTF | GPIO_AF | 15)
-#define PF16_AF_ATA_DA2         (GPIO_PORTF | GPIO_AF | 16)
-#define PF17_AF_ATA_CS0         (GPIO_PORTF | GPIO_AF | 17)
-#define PF18_AF_ATA_CS1         (GPIO_PORTF | GPIO_AF | 18)
-#define PF19_AF_ATA_DIOW        (GPIO_PORTF | GPIO_AF | 19)
-#define PF20_AF_ATA_DIOR        (GPIO_PORTF | GPIO_AF | 20)
-#define PF22_AF_ETMTRACE_CLK    (GPIO_PORTF | GPIO_AF | 22)
-#define PF23_AF_ETMTRACE_PKT4   (GPIO_PORTF | GPIO_AF | 23)
+#define PB4_AF_MSHC_DATA0	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
+#define PB5_AF_MSHC_DATA1	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
+#define PB6_AF_MSHC_DATA2	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
+#define PB7_AF_MSHC_DATA4	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
+#define PB8_AF_MSHC_BS		(GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
+#define PB9_AF_MSHC_SCLK	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
+#define PB10_AF_UART6_TXD	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
+#define PB11_AF_UART6_RXD	(GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
+#define PB12_AF_UART6_CTS	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
+#define PB13_AF_UART6_RTS	(GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
+#define PB18_AF_UART5_TXD	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
+#define PB19_AF_UART5_RXD	(GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
+#define PB20_AF_UART5_CTS	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
+#define PB21_AF_UART5_RTS	(GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
+#define PC8_AF_FEC_MDIO		(GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
+#define PC24_AF_GPT5_TOUT	(GPIO_PORTC | GPIO_AF | 24)
+#define PC25_AF_GPT5_TIN	(GPIO_PORTC | GPIO_AF | 25)
+#define PC26_AF_GPT4_TOUT	(GPIO_PORTC | GPIO_AF | 26)
+#define PC27_AF_GPT4_TIN	(GPIO_PORTC | GPIO_AF | 27)
+#define PD1_AF_ETMTRACE_PKT15	(GPIO_PORTD | GPIO_AF | 1)
+#define PD6_AF_ETMTRACE_PKT14	(GPIO_PORTD | GPIO_AF | 6)
+#define PD7_AF_ETMTRACE_PKT13	(GPIO_PORTD | GPIO_AF | 7)
+#define PD9_AF_ETMTRACE_PKT12	(GPIO_PORTD | GPIO_AF | 9)
+#define PD2_AF_SD3_D0		(GPIO_PORTD | GPIO_AF | 2)
+#define PD3_AF_SD3_D1		(GPIO_PORTD | GPIO_AF | 3)
+#define PD4_AF_SD3_D2		(GPIO_PORTD | GPIO_AF | 4)
+#define PD5_AF_SD3_D3		(GPIO_PORTD | GPIO_AF | 5)
+#define PD8_AF_FEC_MDIO		(GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
+#define PD10_AF_ETMTRACE_PKT11	(GPIO_PORTD | GPIO_AF | 10)
+#define PD11_AF_ETMTRACE_PKT10	(GPIO_PORTD | GPIO_AF | 11)
+#define PD12_AF_ETMTRACE_PKT9	(GPIO_PORTD | GPIO_AF | 12)
+#define PD13_AF_ETMTRACE_PKT8	(GPIO_PORTD | GPIO_AF | 13)
+#define PD14_AF_ETMTRACE_PKT7	(GPIO_PORTD | GPIO_AF | 14)
+#define PD15_AF_ETMTRACE_PKT6	(GPIO_PORTD | GPIO_AF | 15)
+#define PD16_AF_ETMTRACE_PKT5	(GPIO_PORTD | GPIO_AF | 16)
+#define PF1_AF_ETMTRACE_PKT0	(GPIO_PORTF | GPIO_AF | 1)
+#define PF3_AF_ETMTRACE_PKT2	(GPIO_PORTF | GPIO_AF | 3)
+#define PF5_AF_ETMPIPESTAT11	(GPIO_PORTF | GPIO_AF | 5)
+#define PF7_AF_ATA_BUFFER_EN	(GPIO_PORTF | GPIO_AF | 7)
+#define PF8_AF_ATA_IORDY	(GPIO_PORTF | GPIO_AF | 8)
+#define PF9_AF_ATA_INTRQ	(GPIO_PORTF | GPIO_AF | 9)
+#define PF10_AF_ATA_RESET	(GPIO_PORTF | GPIO_AF | 10)
+#define PF11_AF_ATA_DMACK	(GPIO_PORTF | GPIO_AF | 11)
+#define PF12_AF_ATA_DMAREQ	(GPIO_PORTF | GPIO_AF | 12)
+#define PF13_AF_ATA_DA0		(GPIO_PORTF | GPIO_AF | 13)
+#define PF14_AF_ATA_DA1		(GPIO_PORTF | GPIO_AF | 14)
+#define PF15_AF_ETMTRACE_SYNC	(GPIO_PORTF | GPIO_AF | 15)
+#define PF16_AF_ATA_DA2		(GPIO_PORTF | GPIO_AF | 16)
+#define PF17_AF_ATA_CS0		(GPIO_PORTF | GPIO_AF | 17)
+#define PF18_AF_ATA_CS1		(GPIO_PORTF | GPIO_AF | 18)
+#define PF19_AF_ATA_DIOW	(GPIO_PORTF | GPIO_AF | 19)
+#define PF20_AF_ATA_DIOR	(GPIO_PORTF | GPIO_AF | 20)
+#define PF22_AF_ETMTRACE_CLK	(GPIO_PORTF | GPIO_AF | 22)
+#define PF23_AF_ETMTRACE_PKT4	(GPIO_PORTF | GPIO_AF | 23)
 
 /* AIN GPIO pin functions */
 
-#define PC14_AIN_SSI1_MCLK      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PC15_AIN_GPT6_TOUT      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
-#define PD0_AIN_FEC_TXD0        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
-#define PD1_AIN_FEC_TXD1        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
-#define PD2_AIN_FEC_TXD2        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
-#define PD3_AIN_FEC_TXD3        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
-#define PD9_AIN_FEC_MDC         (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
-#define PD16_AIN_FEC_TX_ER      (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
-#define PD27_AIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
-#define PF23_AIN_FEC_TX_EN      (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
+#define PC14_AIN_SSI1_MCLK	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PC15_AIN_GPT6_TOUT	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
+#define PD0_AIN_FEC_TXD0	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
+#define PD1_AIN_FEC_TXD1	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
+#define PD2_AIN_FEC_TXD2	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
+#define PD3_AIN_FEC_TXD3	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
+#define PD9_AIN_FEC_MDC		(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
+#define PD16_AIN_FEC_TX_ER	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
+#define PD27_AIN_EXT_DMA_GRANT	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
+#define PF23_AIN_FEC_TX_EN	(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
 
 /* BIN GPIO pin functions */
 
-#define PC14_BIN_SSI2_MCLK      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PC14_BIN_SSI2_MCLK	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
 
 /* CIN GPIO pin functions */
 
-#define PD2_CIN_SLCDC1_DAT0     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
-#define PD3_CIN_SLCDC1_DAT1     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
-#define PD4_CIN_SLCDC1_DAT2     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
-#define PD5_CIN_SLCDC1_DAT3     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
-#define PD6_CIN_SLCDC1_DAT4     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
-#define PD7_CIN_SLCDC1_DAT5     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
-#define PD8_CIN_SLCDC1_DAT6     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
-#define PD9_CIN_SLCDC1_DAT7     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
-#define PD10_CIN_SLCDC1_DAT8    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
-#define PD11_CIN_SLCDC1_DAT9    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
-#define PD12_CIN_SLCDC1_DAT10   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
-#define PD13_CIN_SLCDC1_DAT11   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
-#define PD14_CIN_SLCDC1_DAT12   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
-#define PD15_CIN_SLCDC1_DAT13   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
-#define PD16_CIN_SLCDC1_DAT14   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
-#define PD23_CIN_SLCDC1_DAT15   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
-#define PF27_CIN_EXT_DMA_GRANT  (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
+#define PD2_CIN_SLCDC1_DAT0	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
+#define PD3_CIN_SLCDC1_DAT1	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
+#define PD4_CIN_SLCDC1_DAT2	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
+#define PD5_CIN_SLCDC1_DAT3	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
+#define PD6_CIN_SLCDC1_DAT4	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
+#define PD7_CIN_SLCDC1_DAT5	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
+#define PD8_CIN_SLCDC1_DAT6	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
+#define PD9_CIN_SLCDC1_DAT7	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
+#define PD10_CIN_SLCDC1_DAT8	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
+#define PD11_CIN_SLCDC1_DAT9	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
+#define PD12_CIN_SLCDC1_DAT10	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
+#define PD13_CIN_SLCDC1_DAT11	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
+#define PD14_CIN_SLCDC1_DAT12	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
+#define PD15_CIN_SLCDC1_DAT13	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
+#define PD16_CIN_SLCDC1_DAT14	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
+#define PD23_CIN_SLCDC1_DAT15	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
+#define PF27_CIN_EXT_DMA_GRANT	(GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
 /* LCDC_TESTx on PBxx omitted, because it's not clear what they do */
 
 /* AOUT GPIO pin functions */
 
-#define PC14_AOUT_GPT6_TIN      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
-#define PD4_AOUT_FEC_RX_ER      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
-#define PD5_AOUT_FEC_RXD1       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
-#define PD6_AOUT_FEC_RXD2       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
-#define PD7_AOUT_FEC_RXD3       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
-#define PD10_AOUT_FEC_CRS       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
-#define PD11_AOUT_FEC_TX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
-#define PD12_AOUT_FEC_RXD0      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
-#define PD13_AOUT_FEC_RX_DV     (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
-#define PD14_AOUT_FEC_RX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
-#define PD15_AOUT_FEC_COL       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
+#define PC14_AOUT_GPT6_TIN	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
+#define PD4_AOUT_FEC_RX_ER	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
+#define PD5_AOUT_FEC_RXD1	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
+#define PD6_AOUT_FEC_RXD2	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
+#define PD7_AOUT_FEC_RXD3	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
+#define PD10_AOUT_FEC_CRS	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
+#define PD11_AOUT_FEC_TX_CLK	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
+#define PD12_AOUT_FEC_RXD0	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
+#define PD13_AOUT_FEC_RX_DV	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
+#define PD14_AOUT_FEC_RX_CLK	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
+#define PD15_AOUT_FEC_COL	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
 
-#define PC17_BOUT_PC_IOIS16     (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
-#define PC18_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
-#define PC19_BOUT_PC_BVD1       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
-#define PC28_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
-#define PC29_BOUT_PC_VS1        (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
-#define PC30_BOUT_PC_READY      (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
-#define PC31_BOUT_PC_WAIT       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
+/* BOUT GPIO pin functions */
 
+#define PC17_BOUT_PC_IOIS16	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
+#define PC18_BOUT_PC_BVD2	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
+#define PC19_BOUT_PC_BVD1	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
+#define PC28_BOUT_PC_BVD2	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
+#define PC29_BOUT_PC_VS1	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
+#define PC30_BOUT_PC_READY	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
+#define PC31_BOUT_PC_WAIT	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
 
-#endif /* _MXC_GPIO_MX1_MX2_H */
+#endif /* __MACH_IOMUX_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
index fb5ae63..c4f116d 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
@@ -1,237 +1,230 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_MX2x_H
-#define _MXC_IOMUX_MX2x_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX2x_H__
+#define __MACH_IOMUX_MX2x_H__
 
 /* Primary GPIO pin functions */
 
-#define PA5_PF_LSCLK            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
-#define PA6_PF_LD0              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
-#define PA7_PF_LD1              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
-#define PA8_PF_LD2              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
-#define PA9_PF_LD3              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
-#define PA10_PF_LD4             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
-#define PA11_PF_LD5             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
-#define PA12_PF_LD6             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
-#define PA13_PF_LD7             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
-#define PA14_PF_LD8             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
-#define PA15_PF_LD9             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_LD10            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_PF_LD11            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
-#define PA18_PF_LD12            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
-#define PA19_PF_LD13            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
-#define PA20_PF_LD14            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
-#define PA21_PF_LD15            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
-#define PA22_PF_LD16            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
-#define PA23_PF_LD17            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
-#define PA24_PF_REV             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
-#define PA25_PF_CLS             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
-#define PA26_PF_PS              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
-#define PA27_PF_SPL_SPR         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
-#define PA28_PF_HSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
-#define PA29_PF_VSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
-#define PA30_PF_CONTRAST        (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
-#define PA31_PF_OE_ACD          (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
-#define PB4_PF_SD2_D0           (GPIO_PORTB | GPIO_PF | 4)
-#define PB5_PF_SD2_D1           (GPIO_PORTB | GPIO_PF | 5)
-#define PB6_PF_SD2_D2           (GPIO_PORTB | GPIO_PF | 6)
-#define PB7_PF_SD2_D3           (GPIO_PORTB | GPIO_PF | 7)
-#define PB8_PF_SD2_CMD          (GPIO_PORTB | GPIO_PF | 8)
-#define PB9_PF_SD2_CLK          (GPIO_PORTB | GPIO_PF | 9)
-#define PB10_PF_CSI_D0          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
-#define PB11_PF_CSI_D1          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
-#define PB12_PF_CSI_D2          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
-#define PB13_PF_CSI_D3          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
-#define PB14_PF_CSI_D4          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
-#define PB15_PF_CSI_MCLK        (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
-#define PB16_PF_CSI_PIXCLK      (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
-#define PB17_PF_CSI_D5          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
-#define PB18_PF_CSI_D6          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
-#define PB19_PF_CSI_D7          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
-#define PB20_PF_CSI_VSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
-#define PB21_PF_CSI_HSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
-#define PB23_PF_USB_PWR         (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USB_OC          (GPIO_PORTB | GPIO_PF | 24)
-#define PB26_PF_USBH1_FS        (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBH1_OE        (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_USBH1_TXDM      (GPIO_PORTB | GPIO_PF | 28)
-#define PB29_PF_USBH1_TXDP      (GPIO_PORTB | GPIO_PF | 29)
-#define PB30_PF_USBH1_RXDM      (GPIO_PORTB | GPIO_PF | 30)
-#define PB31_PF_USBH1_RXDP      (GPIO_PORTB | GPIO_PF | 31)
-#define PC14_PF_TOUT            (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_TIN             (GPIO_PORTC | GPIO_PF | 15)
-#define PC20_PF_SSI1_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
-#define PC21_PF_SSI1_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
-#define PC22_PF_SSI1_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
-#define PC23_PF_SSI1_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
-#define PC24_PF_SSI2_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
-#define PC25_PF_SSI2_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
-#define PC26_PF_SSI2_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
-#define PC27_PF_SSI2_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
-#define PC28_PF_SSI3_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
-#define PC29_PF_SSI3_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
-#define PC30_PF_SSI3_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
-#define PC31_PF_SSI3_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
-#define PD17_PF_I2C_DATA        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_I2C_CLK         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_CSPI2_SS2       (GPIO_PORTD | GPIO_PF | 19)
-#define PD20_PF_CSPI2_SS1       (GPIO_PORTD | GPIO_PF | 20)
-#define PD21_PF_CSPI2_SS0       (GPIO_PORTD | GPIO_PF | 21)
-#define PD22_PF_CSPI2_SCLK      (GPIO_PORTD | GPIO_PF | 22)
-#define PD23_PF_CSPI2_MISO      (GPIO_PORTD | GPIO_PF | 23)
-#define PD24_PF_CSPI2_MOSI      (GPIO_PORTD | GPIO_PF | 24)
-#define PD25_PF_CSPI1_RDY       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_CSPI1_SS2       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_CSPI1_SS1       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_CSPI1_SS0       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_CSPI1_SCLK      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_CSPI1_MISO      (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
-#define PD31_PF_CSPI1_MOSI      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
-#define PE3_PF_UART2_CTS        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
-#define PE4_PF_UART2_RTS        (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
-#define PE5_PF_PWMO             (GPIO_PORTE | GPIO_PF | 5)
-#define PE6_PF_UART2_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
-#define PE7_PF_UART2_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
-#define PE8_PF_UART3_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
-#define PE9_PF_UART3_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
-#define PE10_PF_UART3_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
-#define PE11_PF_UART3_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
-#define PE12_PF_UART1_TXD       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
-#define PE13_PF_UART1_RXD       (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
-#define PE14_PF_UART1_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
-#define PE15_PF_UART1_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
-#define PE16_PF_RTCK            (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
-#define PE17_PF_RESET_OUT       (GPIO_PORTE | GPIO_PF | 17)
-#define PE18_PF_SD1_D0          (GPIO_PORTE | GPIO_PF | 18)
-#define PE19_PF_SD1_D1          (GPIO_PORTE | GPIO_PF | 19)
-#define PE20_PF_SD1_D2          (GPIO_PORTE | GPIO_PF | 20)
-#define PE21_PF_SD1_D3          (GPIO_PORTE | GPIO_PF | 21)
-#define PE22_PF_SD1_CMD         (GPIO_PORTE | GPIO_PF | 22)
-#define PE23_PF_SD1_CLK         (GPIO_PORTE | GPIO_PF | 23)
-#define PF0_PF_NRFB             (GPIO_PORTF | GPIO_PF | 0)
-#define PF2_PF_NFWP             (GPIO_PORTF | GPIO_PF | 2)
-#define PF4_PF_NFALE            (GPIO_PORTF | GPIO_PF | 4)
-#define PF5_PF_NFRE             (GPIO_PORTF | GPIO_PF | 5)
-#define PF6_PF_NFWE             (GPIO_PORTF | GPIO_PF | 6)
-#define PF15_PF_CLKO            (GPIO_PORTF | GPIO_PF | 15)
-#define PF21_PF_CS4             (GPIO_PORTF | GPIO_PF | 21)
-#define PF22_PF_CS5             (GPIO_PORTF | GPIO_PF | 22)
+#define PA5_PF_LSCLK		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
+#define PA6_PF_LD0		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
+#define PA7_PF_LD1		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
+#define PA8_PF_LD2		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
+#define PA9_PF_LD3		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
+#define PA10_PF_LD4		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
+#define PA11_PF_LD5		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
+#define PA12_PF_LD6		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
+#define PA13_PF_LD7		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
+#define PA14_PF_LD8		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
+#define PA15_PF_LD9		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_LD10		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_PF_LD11		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
+#define PA18_PF_LD12		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
+#define PA19_PF_LD13		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
+#define PA20_PF_LD14		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
+#define PA21_PF_LD15		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
+#define PA22_PF_LD16		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
+#define PA23_PF_LD17		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
+#define PA24_PF_REV		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
+#define PA25_PF_CLS		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
+#define PA26_PF_PS		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
+#define PA27_PF_SPL_SPR		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
+#define PA28_PF_HSYNC		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
+#define PA29_PF_VSYNC		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
+#define PA30_PF_CONTRAST	(GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
+#define PA31_PF_OE_ACD		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
+#define PB4_PF_SD2_D0		(GPIO_PORTB | GPIO_PF | 4)
+#define PB5_PF_SD2_D1		(GPIO_PORTB | GPIO_PF | 5)
+#define PB6_PF_SD2_D2		(GPIO_PORTB | GPIO_PF | 6)
+#define PB7_PF_SD2_D3		(GPIO_PORTB | GPIO_PF | 7)
+#define PB8_PF_SD2_CMD		(GPIO_PORTB | GPIO_PF | 8)
+#define PB9_PF_SD2_CLK		(GPIO_PORTB | GPIO_PF | 9)
+#define PB10_PF_CSI_D0		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
+#define PB11_PF_CSI_D1		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
+#define PB12_PF_CSI_D2		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
+#define PB13_PF_CSI_D3		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
+#define PB14_PF_CSI_D4		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
+#define PB15_PF_CSI_MCLK	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
+#define PB16_PF_CSI_PIXCLK	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
+#define PB17_PF_CSI_D5		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
+#define PB18_PF_CSI_D6		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
+#define PB19_PF_CSI_D7		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
+#define PB20_PF_CSI_VSYNC	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
+#define PB21_PF_CSI_HSYNC	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
+#define PB23_PF_USB_PWR		(GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USB_OC		(GPIO_PORTB | GPIO_PF | 24)
+#define PB26_PF_USBH1_FS	(GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBH1_OE	(GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_USBH1_TXDM	(GPIO_PORTB | GPIO_PF | 28)
+#define PB29_PF_USBH1_TXDP	(GPIO_PORTB | GPIO_PF | 29)
+#define PB30_PF_USBH1_RXDM	(GPIO_PORTB | GPIO_PF | 30)
+#define PB31_PF_USBH1_RXDP	(GPIO_PORTB | GPIO_PF | 31)
+#define PC14_PF_TOUT		(GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_TIN		(GPIO_PORTC | GPIO_PF | 15)
+#define PC20_PF_SSI1_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
+#define PC21_PF_SSI1_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
+#define PC22_PF_SSI1_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
+#define PC23_PF_SSI1_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
+#define PC24_PF_SSI2_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
+#define PC25_PF_SSI2_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
+#define PC26_PF_SSI2_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
+#define PC27_PF_SSI2_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
+#define PC28_PF_SSI3_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
+#define PC29_PF_SSI3_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
+#define PC30_PF_SSI3_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
+#define PC31_PF_SSI3_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
+#define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_CSPI2_SS2	(GPIO_PORTD | GPIO_PF | 19)
+#define PD20_PF_CSPI2_SS1	(GPIO_PORTD | GPIO_PF | 20)
+#define PD21_PF_CSPI2_SS0	(GPIO_PORTD | GPIO_PF | 21)
+#define PD22_PF_CSPI2_SCLK	(GPIO_PORTD | GPIO_PF | 22)
+#define PD23_PF_CSPI2_MISO	(GPIO_PORTD | GPIO_PF | 23)
+#define PD24_PF_CSPI2_MOSI	(GPIO_PORTD | GPIO_PF | 24)
+#define PD25_PF_CSPI1_RDY	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_CSPI1_SS2	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_CSPI1_SS1	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_CSPI1_SS0	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_CSPI1_SCLK	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_CSPI1_MISO	(GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
+#define PD31_PF_CSPI1_MOSI	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
+#define PE3_PF_UART2_CTS	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
+#define PE4_PF_UART2_RTS	(GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
+#define PE5_PF_PWMO		(GPIO_PORTE | GPIO_PF | 5)
+#define PE6_PF_UART2_TXD	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
+#define PE7_PF_UART2_RXD	(GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
+#define PE8_PF_UART3_TXD	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
+#define PE9_PF_UART3_RXD	(GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
+#define PE10_PF_UART3_CTS	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
+#define PE11_PF_UART3_RTS	(GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
+#define PE12_PF_UART1_TXD	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
+#define PE13_PF_UART1_RXD	(GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
+#define PE14_PF_UART1_CTS	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
+#define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
+#define PE16_PF_RTCK		(GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
+#define PE17_PF_RESET_OUT	(GPIO_PORTE | GPIO_PF | 17)
+#define PE18_PF_SD1_D0		(GPIO_PORTE | GPIO_PF | 18)
+#define PE19_PF_SD1_D1		(GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SD1_D2		(GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SD1_D3		(GPIO_PORTE | GPIO_PF | 21)
+#define PE22_PF_SD1_CMD		(GPIO_PORTE | GPIO_PF | 22)
+#define PE23_PF_SD1_CLK		(GPIO_PORTE | GPIO_PF | 23)
+#define PF0_PF_NRFB		(GPIO_PORTF | GPIO_PF | 0)
+#define PF2_PF_NFWP		(GPIO_PORTF | GPIO_PF | 2)
+#define PF4_PF_NFALE		(GPIO_PORTF | GPIO_PF | 4)
+#define PF5_PF_NFRE		(GPIO_PORTF | GPIO_PF | 5)
+#define PF6_PF_NFWE		(GPIO_PORTF | GPIO_PF | 6)
+#define PF15_PF_CLKO		(GPIO_PORTF | GPIO_PF | 15)
+#define PF21_PF_CS4		(GPIO_PORTF | GPIO_PF | 21)
+#define PF22_PF_CS5		(GPIO_PORTF | GPIO_PF | 22)
 
 /* Alternate GPIO pin functions */
 
-#define PB26_AF_UART4_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
-#define PB28_AF_UART4_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
-#define PB29_AF_UART4_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
-#define PB31_AF_UART4_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
-#define PC28_AF_SLCDC2_D0       (GPIO_PORTC | GPIO_AF | 28)
-#define PC29_AF_SLCDC2_RS       (GPIO_PORTC | GPIO_AF | 29)
-#define PC30_AF_SLCDC2_CS       (GPIO_PORTC | GPIO_AF | 30)
-#define PC31_AF_SLCDC2_CLK      (GPIO_PORTC | GPIO_AF | 31)
-#define PD19_AF_USBH2_DATA4     (GPIO_PORTD | GPIO_AF | 19)
-#define PD20_AF_USBH2_DATA3     (GPIO_PORTD | GPIO_AF | 20)
-#define PD21_AF_USBH2_DATA6     (GPIO_PORTD | GPIO_AF | 21)
-#define PD22_AF_USBH2_DATA0     (GPIO_PORTD | GPIO_AF | 22)
-#define PD23_AF_USBH2_DATA2     (GPIO_PORTD | GPIO_AF | 23)
-#define PD24_AF_USBH2_DATA1     (GPIO_PORTD | GPIO_AF | 24)
-#define PD26_AF_USBH2_DATA5     (GPIO_PORTD | GPIO_AF | 26)
-#define PE0_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 0)
-#define PE1_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 1)
-#define PE2_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 2)
-#define PE3_AF_KP_COL7          (GPIO_PORTE | GPIO_AF | 3)
-#define PE4_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 4)
-#define PE6_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 6)
-#define PE7_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 7)
-#define PE16_AF_OWIRE           (GPIO_PORTE | GPIO_AF | 16)
-#define PE18_AF_CSPI3_MISO      (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
-#define PE21_AF_CSPI3_SS        (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
-#define PE22_AF_CSPI3_MOSI      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
-#define PE23_AF_CSPI3_SCLK      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
+#define PB26_AF_UART4_RTS	(GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
+#define PB28_AF_UART4_TXD	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
+#define PB29_AF_UART4_CTS	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
+#define PB31_AF_UART4_RXD	(GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
+#define PC28_AF_SLCDC2_D0	(GPIO_PORTC | GPIO_AF | 28)
+#define PC29_AF_SLCDC2_RS	(GPIO_PORTC | GPIO_AF | 29)
+#define PC30_AF_SLCDC2_CS	(GPIO_PORTC | GPIO_AF | 30)
+#define PC31_AF_SLCDC2_CLK	(GPIO_PORTC | GPIO_AF | 31)
+#define PD19_AF_USBH2_DATA4	(GPIO_PORTD | GPIO_AF | 19)
+#define PD20_AF_USBH2_DATA3	(GPIO_PORTD | GPIO_AF | 20)
+#define PD21_AF_USBH2_DATA6	(GPIO_PORTD | GPIO_AF | 21)
+#define PD22_AF_USBH2_DATA0	(GPIO_PORTD | GPIO_AF | 22)
+#define PD23_AF_USBH2_DATA2	(GPIO_PORTD | GPIO_AF | 23)
+#define PD24_AF_USBH2_DATA1	(GPIO_PORTD | GPIO_AF | 24)
+#define PD26_AF_USBH2_DATA5	(GPIO_PORTD | GPIO_AF | 26)
+#define PE0_AF_KP_COL6		(GPIO_PORTE | GPIO_AF | 0)
+#define PE1_AF_KP_ROW6		(GPIO_PORTE | GPIO_AF | 1)
+#define PE2_AF_KP_ROW7		(GPIO_PORTE | GPIO_AF | 2)
+#define PE3_AF_KP_COL7		(GPIO_PORTE | GPIO_AF | 3)
+#define PE4_AF_KP_ROW7		(GPIO_PORTE | GPIO_AF | 4)
+#define PE6_AF_KP_COL6		(GPIO_PORTE | GPIO_AF | 6)
+#define PE7_AF_KP_ROW6		(GPIO_PORTE | GPIO_AF | 7)
+#define PE16_AF_OWIRE		(GPIO_PORTE | GPIO_AF | 16)
+#define PE18_AF_CSPI3_MISO	(GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
+#define PE21_AF_CSPI3_SS	(GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
+#define PE22_AF_CSPI3_MOSI	(GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
+#define PE23_AF_CSPI3_SCLK	(GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
 
 /* AIN GPIO pin functions */
 
-#define PA6_AIN_SLCDC1_DAT0     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
-#define PA7_AIN_SLCDC1_DAT1     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
-#define PA8_AIN_SLCDC1_DAT2     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
-#define PA0_AIN_SLCDC1_DAT3     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA11_AIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
-#define PA13_AIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
-#define PA15_AIN_SLCDC1_DAT9    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
-#define PA17_AIN_SLCDC1_DAT11   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA19_AIN_SLCDC1_DAT13   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
-#define PA21_AIN_SLCDC1_DAT15   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
-#define PA22_AIN_EXT_DMAGRANT   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
-#define PA24_AIN_SLCDC1_D0      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
-#define PA25_AIN_SLCDC1_RS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
-#define PA26_AIN_SLCDC1_CS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
-#define PA27_AIN_SLCDC1_CLK     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
-#define PB6_AIN_SLCDC1_D0       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
-#define PB7_AIN_SLCDC1_RS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
-#define PB8_AIN_SLCDC1_CS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
-#define PB9_AIN_SLCDC1_CLK      (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
-#define PB25_AIN_SLCDC1_DAT0    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
-#define PB26_AIN_SLCDC1_DAT1    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
-#define PB27_AIN_SLCDC1_DAT2    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
-#define PB28_AIN_SLCDC1_DAT3    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
-#define PB29_AIN_SLCDC1_DAT4    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
-#define PB30_AIN_SLCDC1_DAT5    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
-#define PB31_AIN_SLCDC1_DAT6    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
-#define PC5_AIN_SLCDC1_DAT7     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
-#define PC6_AIN_SLCDC1_DAT8     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
-#define PC7_AIN_SLCDC1_DAT9     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
-#define PC8_AIN_SLCDC1_DAT10    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
-#define PC9_AIN_SLCDC1_DAT11    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
-#define PC10_AIN_SLCDC1_DAT12   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
-#define PC11_AIN_SLCDC1_DAT13   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
-#define PC12_AIN_SLCDC1_DAT14   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
-#define PC13_AIN_SLCDC1_DAT15   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
-#define PE5_AIN_PC_SPKOUT       (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
+#define PA6_AIN_SLCDC1_DAT0	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
+#define PA7_AIN_SLCDC1_DAT1	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
+#define PA8_AIN_SLCDC1_DAT2	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
+#define PA0_AIN_SLCDC1_DAT3	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA11_AIN_SLCDC1_DAT5	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
+#define PA13_AIN_SLCDC1_DAT7	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
+#define PA15_AIN_SLCDC1_DAT9	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
+#define PA17_AIN_SLCDC1_DAT11	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA19_AIN_SLCDC1_DAT13	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
+#define PA21_AIN_SLCDC1_DAT15	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
+#define PA22_AIN_EXT_DMAGRANT	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
+#define PA24_AIN_SLCDC1_D0	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
+#define PA25_AIN_SLCDC1_RS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
+#define PA26_AIN_SLCDC1_CS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
+#define PA27_AIN_SLCDC1_CLK	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
+#define PB6_AIN_SLCDC1_D0	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
+#define PB7_AIN_SLCDC1_RS	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
+#define PB8_AIN_SLCDC1_CS	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
+#define PB9_AIN_SLCDC1_CLK	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
+#define PB25_AIN_SLCDC1_DAT0	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
+#define PB26_AIN_SLCDC1_DAT1	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
+#define PB27_AIN_SLCDC1_DAT2	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
+#define PB28_AIN_SLCDC1_DAT3	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
+#define PB29_AIN_SLCDC1_DAT4	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
+#define PB30_AIN_SLCDC1_DAT5	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
+#define PB31_AIN_SLCDC1_DAT6	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
+#define PC5_AIN_SLCDC1_DAT7	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
+#define PC6_AIN_SLCDC1_DAT8	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
+#define PC7_AIN_SLCDC1_DAT9	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
+#define PC8_AIN_SLCDC1_DAT10	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
+#define PC9_AIN_SLCDC1_DAT11	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
+#define PC10_AIN_SLCDC1_DAT12	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
+#define PC11_AIN_SLCDC1_DAT13	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
+#define PC12_AIN_SLCDC1_DAT14	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
+#define PC13_AIN_SLCDC1_DAT15	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
+#define PE5_AIN_PC_SPKOUT	(GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
 
 /* BIN GPIO pin functions */
 
-#define PE5_BIN_TOUT2           (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
+#define PE5_BIN_TOUT2		(GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
 
 /* CIN GPIO pin functions */
 
-#define PA14_CIN_SLCDC1_DAT0    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
-#define PA15_CIN_SLCDC1_DAT1    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
-#define PA16_CIN_SLCDC1_DAT2    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
-#define PA17_CIN_SLCDC1_DAT3    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
-#define PA18_CIN_SLCDC1_DAT4    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
-#define PA19_CIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
-#define PA20_CIN_SLCDC1_DAT6    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
-#define PA21_CIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
-#define PB30_CIN_UART4_CTS      (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
-#define PE5_CIN_TOUT3           (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
+#define PA14_CIN_SLCDC1_DAT0	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
+#define PA15_CIN_SLCDC1_DAT1	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
+#define PA16_CIN_SLCDC1_DAT2	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
+#define PA17_CIN_SLCDC1_DAT3	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
+#define PA18_CIN_SLCDC1_DAT4	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
+#define PA19_CIN_SLCDC1_DAT5	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
+#define PA20_CIN_SLCDC1_DAT6	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
+#define PA21_CIN_SLCDC1_DAT7	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
+#define PB30_CIN_UART4_CTS	(GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
+#define PE5_CIN_TOUT3		(GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
 
 /* AOUT GPIO pin functions */
 
-#define PB29_AOUT_UART4_RXD     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
-#define PB31_AOUT_UART4_RTS     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
+#define PB29_AOUT_UART4_RXD	(GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
+#define PB31_AOUT_UART4_RTS	(GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
 #define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8)
-#define PC15_AOUT_WKGD          (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
-#define PF21_AOUT_DTACK         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
+#define PC15_AOUT_WKGD		(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
+#define PF21_AOUT_DTACK		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
 
-
-#endif
+#endif /* ifndef __MACH_IOMUX_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index e1fc6da..e51465d 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -16,12 +16,10 @@
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  * MA 02110-1301, USA.
  */
-
-#ifndef __MACH_MX31_IOMUX_H__
-#define __MACH_MX31_IOMUX_H__
+#ifndef __MACH_IOMUX_MX3_H__
+#define __MACH_IOMUX_MX3_H__
 
 #include <linux/types.h>
-
 /*
  * various IOMUX output functions
  */
@@ -34,7 +32,7 @@
 #define	IOMUX_OCONFIG_ALT4 (5 << 4)	/* used as alternate function 4 */
 #define	IOMUX_OCONFIG_ALT5 (6 << 4)	/* used as alternate function 5 */
 #define	IOMUX_OCONFIG_ALT6 (7 << 4)	/* used as alternate function 6 */
-#define	IOMUX_ICONFIG_NONE  0	 	/* not configured for input */
+#define	IOMUX_ICONFIG_NONE  0		/* not configured for input */
 #define	IOMUX_ICONFIG_GPIO  1		/* used as GPIO */
 #define	IOMUX_ICONFIG_FUNC  2		/* used as function */
 #define	IOMUX_ICONFIG_ALT1  4		/* used as alternate function 1 */
@@ -167,11 +165,6 @@
 	MXC_GPIO_IRQ_START)
 
 /*
- * The number of gpio devices among the pads
- */
-#define GPIO_PORT_MAX 3
-
-/*
  * This enumeration is constructed based on the Section
  * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
  * value is constructed based on the rules described above.
@@ -633,40 +626,40 @@
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_CSI_D4__GPIO3_4	IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_CSI_D5__GPIO3_5	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0    IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1    IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2    IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3    IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4    IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5    IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6    IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7    IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_CLK__USBOTG_CLK        IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM        IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_MISO__USBH1_RXDP        IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS0__USBH1_TXDM         IOMUX_MODE(MX31_PIN_CSPI1_SS0,  IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS1__USBH1_TXDP         IOMUX_MODE(MX31_PIN_CSPI1_SS1,  IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS2__USBH1_RCV          IOMUX_MODE(MX31_PIN_CSPI1_SS2,  IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SCLK__USBH1_OEB         IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS       IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0	IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1	IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2	IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3	IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4	IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5	IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6	IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7	IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_CLK__USBOTG_CLK		IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DIR__USBOTG_DIR		IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_NXT__USBOTG_NXT		IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_STP__USBOTG_STP		IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM		IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_MISO__USBH1_RXDP		IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS0__USBH1_TXDM		IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS1__USBH1_TXDP		IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS2__USBH1_RCV		IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SCLK__USBH1_OEB		IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS	IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_SFS6__USBH1_SUSPEND	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_NFRE_B__GPIO1_11	IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_NFALE__GPIO1_12	IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBH2_DATA0__USBH2_DATA0      IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DATA1__USBH2_DATA1      IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA0__USBH2_DATA0	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA1__USBH2_DATA1	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_STXD3__USBH2_DATA2	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SRXD3__USBH2_DATA3	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SCK3__USBH2_DATA4	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SFS3__USBH2_DATA5	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_STXD6__USBH2_DATA6	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SRXD6__USBH2_DATA7	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_CLK__USBH2_CLK          IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DIR__USBH2_DIR          IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_NXT__USBH2_NXT          IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_STP__USBH2_STP          IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_CLK__USBH2_CLK		IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DIR__USBH2_DIR		IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_NXT__USBH2_NXT		IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_STP__USBH2_STP		IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SCK6__GPIO1_25		IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
@@ -711,8 +704,8 @@
 #define MX31_PIN_DSR_DCE1__GPIO2_9	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_RI_DCE1__GPIO2_10	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_DCD_DCE1__GPIO2_11	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STXD5__GPIO1_21       IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SRXD5__GPIO1_22       IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD5__GPIO1_21	IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRXD5__GPIO1_22	IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_3__GPIO1_3	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_CSPI2_SS1__CSPI3_SS1	IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_RTS1__GPIO2_6		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
@@ -727,13 +720,14 @@
 #define MX31_PIN_SCK5__SCK5		IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SFS5__SFS5		IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
 
-/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
- * cspi1_ss1*/
+/*
+ * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0,
+ * cspi2_ss1, cspi1_ss0 cspi1_ss1
+ */
 
 /*
  * This function configures the pad value for a IOMUX pin.
  */
 void mxc_iomux_set_pad(enum iomux_pins, u32);
 
-#endif
-
+#endif /* ifndef __MACH_IOMUX_MX3_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
index c88d407..2a24bae 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
new file mode 100644
index 0000000..b4f975e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX51_H__
+#define __MACH_IOMUX_MX51_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * various IOMUX alternate output functions (1-7)
+ */
+typedef enum iomux_config {
+	IOMUX_CONFIG_ALT0,
+	IOMUX_CONFIG_ALT1,
+	IOMUX_CONFIG_ALT2,
+	IOMUX_CONFIG_ALT3,
+	IOMUX_CONFIG_ALT4,
+	IOMUX_CONFIG_ALT5,
+	IOMUX_CONFIG_ALT6,
+	IOMUX_CONFIG_ALT7,
+	IOMUX_CONFIG_GPIO,	/* added to help user use GPIO mode */
+	IOMUX_CONFIG_SION = 0x1 << 4,	/* LOOPBACK:MUX SION bit */
+} iomux_pin_cfg_t;
+
+/* Pad control groupings */
+#define MX51_UART1_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+				PAD_CTL_DSE_HIGH)
+#define MX51_UART2_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_SRE_FAST)
+#define MX51_UART3_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_SRE_FAST)
+
+/*
+ * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/*
+ * FIXME: This was converted using scripts from existing Freescale code to
+ * this form used upstream. Need to verify the name format.
+ */
+
+/*						PAD      MUX   ALT INPSE PATH PADCTRL */
+
+#define MX51_PAD_GPIO_2_0__EIM_D16	IOMUX_PAD(0x3f0, 0x05c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_1__EIM_D17	IOMUX_PAD(0x3f4, 0x060, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_2__EIM_D18	IOMUX_PAD(0x3f8, 0x064, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_3__EIM_D19	IOMUX_PAD(0x3fc, 0x068, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_4__EIM_D20	IOMUX_PAD(0x400, 0x06c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_5__EIM_D21	IOMUX_PAD(0x404, 0x070, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_6__EIM_D22	IOMUX_PAD(0x408, 0x074, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_7__EIM_D23	IOMUX_PAD(0x40c, 0x078, 1, 0x0,   0, NO_PAD_CTRL)
+
+/* Babbage UART3 */
+#define MX51_PAD_EIM_D24__UART3_CTS	IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART3_RXD	IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART3_TXD	IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D27__UART3_RTS	IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL)
+
+#define MX51_PAD_EIM_D28__EIM_D28	IOMUX_PAD(0x420, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__EIM_D29	IOMUX_PAD(0x424, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__EIM_D30	IOMUX_PAD(0x428, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__EIM_D31	IOMUX_PAD(0x42c, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_10__EIM_A16	IOMUX_PAD(0x430, 0x09c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_11__EIM_A17	IOMUX_PAD(0x434, 0x0a0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_12__EIM_A18	IOMUX_PAD(0x438, 0x0a4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_13__EIM_A19	IOMUX_PAD(0x43c, 0x0a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_14__EIM_A20	IOMUX_PAD(0x440, 0x0ac, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_15__EIM_A21	IOMUX_PAD(0x444, 0x0b0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_16__EIM_A22	IOMUX_PAD(0x448, 0x0b4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_17__EIM_A23	IOMUX_PAD(0x44c, 0x0b8, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_18__EIM_A24	IOMUX_PAD(0x450, 0x0bc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_19__EIM_A25	IOMUX_PAD(0x454, 0x0c0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_20__EIM_A26	IOMUX_PAD(0x458, 0x0c4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_21__EIM_A27	IOMUX_PAD(0x45c, 0x0c8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB0__EIM_EB0	IOMUX_PAD(0x460, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB1__EIM_EB1	IOMUX_PAD(0x464, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_22__EIM_EB2	IOMUX_PAD(0x468, 0x0d4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_23__EIM_EB3	IOMUX_PAD(0x46c, 0x0d8, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_24__EIM_OE	IOMUX_PAD(0x470, 0x0dc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_25__EIM_CS0	IOMUX_PAD(0x474, 0x0e0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_26__EIM_CS1	IOMUX_PAD(0x478, 0x0e4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_27__EIM_CS2	IOMUX_PAD(0x47c, 0x0e8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_28__EIM_CS3	IOMUX_PAD(0x480, 0x0ec, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_29__EIM_CS4	IOMUX_PAD(0x484, 0x0f0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_30__EIM_CS5	IOMUX_PAD(0x488, 0x0f4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_31__EIM_DTACK	IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_3_1__EIM_LBA	IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_2__EIM_CRE	IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DRAM_CS1__DRAM_CS1	IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_3__NANDF_WE_B	IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_4__NANDF_RE_B	IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_5__NANDF_ALE	IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_6__NANDF_CLE	IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_7__NANDF_WP_B	IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_8__NANDF_RB0	IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_9__NANDF_RB1	IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_10__NANDF_RB2	IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_11__NANDF_RB3	IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_12__GPIO_NAND	IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL)
+/* REVISIT: Not sure of these values
+
+  #define MX51_PAD_GPIO_1___NANDF_RB4	IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL)
+  #define MX51_PAD_GPIO_3_13__NANDF_RB5	IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+  #define MX51_PAD_GPIO_3_15__NANDF_RB7	IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+*/
+#define MX51_PAD_GPIO_3_14__NANDF_RB6	IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_16__NANDF_CS0	IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_17__NANDF_CS1	IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_18__NANDF_CS2	IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_19__NANDF_CS3	IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_20__NANDF_CS4	IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_21__NANDF_CS5	IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_22__NANDF_CS6	IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_23__NANDF_CS7	IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT	IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_25__NANDF_D15	IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_26__NANDF_D14	IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_27__NANDF_D13	IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_28__NANDF_D12	IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_29__NANDF_D11	IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_30__NANDF_D10	IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_31__NANDF_D9	IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_0__NANDF_D8	IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_1__NANDF_D7	IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_2__NANDF_D6	IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_3__NANDF_D5	IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_4__NANDF_D4	IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_5__NANDF_D3	IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_6__NANDF_D2	IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_7__NANDF_D1	IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_8__NANDF_D0	IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_12__CSI1_D8	IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_13__CSI1_D9	IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D10__CSI1_D10	IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D11__CSI1_D11	IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D12__CSI1_D12	IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D13__CSI1_D13	IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D14__CSI1_D14	IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D15__CSI1_D15	IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D16__CSI1_D16	IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D17__CSI1_D17	IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D18__CSI1_D18	IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D19__CSI1_D19	IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC	IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC	IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK	IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK	IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PKE0__CSI1_PKE0	IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_9__CSI2_D12	IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_10__CSI2_D13	IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D14	IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D15	IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D16	IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D17	IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D18	IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D19	IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_13__CSI2_VSYNC	IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_14__CSI2_HSYNC	IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK	IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_PKE0__CSI2_PKE0	IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_16__I2C1_CLK	IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_17__I2C1_DAT	IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD	IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD	IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_20__AUD3_BB_CK	IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_21__AUD3_BB_FS	IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_22__CSPI1_MOSI	IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_23__CSPI1_MISO	IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_24__CSPI1_SS0	IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_25__CSPI1_SS1	IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_26__CSPI1_RDY	IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_27__CSPI1_SCLK	IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL)
+
+/* Babbage UART1 */
+#define MX51_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x618, 0x228,	IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
+#define MX51_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL)
+
+/* Babbage UART2 */
+#define MX51_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL)
+
+#define MX51_PAD_GPIO_1_22__UART3_RXD	IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_23__UART3_TXD	IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_24__OWIRE_LINE	IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW0__KEY_ROW0	IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW1__KEY_ROW1	IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW2__KEY_ROW2	IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW3__KEY_ROW3	IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL0__KEY_COL0	IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL1__KEY_COL1	IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL2__KEY_COL2	IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL3__KEY_COL3	IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__KEY_COL4	IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__KEY_COL5	IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_25__USBH1_CLK	IOMUX_PAD(0x678, 0x278, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_26__USBH1_DIR	IOMUX_PAD(0x67C, 0x27C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_27__USBH1_STP	IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_28__USBH1_NXT	IOMUX_PAD(0x684, 0x284, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_11__USBH1_DATA0	IOMUX_PAD(0x688, 0x288, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_12__USBH1_DATA1	IOMUX_PAD(0x68C, 0x28C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_13__USBH1_DATA2	IOMUX_PAD(0x690, 0x290, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_14__USBH1_DATA3	IOMUX_PAD(0x694, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_15__USBH1_DATA4	IOMUX_PAD(0x698, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_16__USBH1_DATA5	IOMUX_PAD(0x69C, 0x29C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_17__USBH1_DATA6	IOMUX_PAD(0x6A0, 0x2A0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_18__USBH1_DATA7	IOMUX_PAD(0x6A4, 0x2A4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_0__DI1_PIN11	IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_1__DI1_PIN12	IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_2__DI1_PIN13	IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_3__DI1_D0_CS	IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_4__DI1_D1_CS	IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN	IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO	IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK	IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS	IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0	IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1	IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2	IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3	IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4	IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5	IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6	IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7	IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8	IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9	IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10	IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11	IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12	IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13	IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14	IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15	IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16	IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17	IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18	IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19	IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20	IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21	IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22	IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23	IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN3__DI1_PIN3	IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN2__DI1_PIN2	IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP1__DI_GP1	IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP2__DI_GP2	IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__DI_GP3	IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN4__DI2_PIN4	IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN2__DI2_PIN2	IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN3__DI2_PIN3	IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DI_GP4	IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0	IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1	IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2	IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3	IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4	IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5	IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_19__DISP2_DAT6	IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_29__DISP2_DAT7	IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_30__DISP2_DAT8	IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_31__DISP2_DAT9	IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10	IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11	IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12	IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13	IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14	IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15	IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__SD1_DATA1	IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_0__GPIO1_0	IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_1__GPIO1_1	IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__SD2_CMD	IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__SD2_CLK	IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA0__SD2_DATA0	IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD2_DATA1	IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD2_DATA2	IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD2_DATA3	IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__GPIO1_2	IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__GPIO1_3	IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_4__GPIO1_4	IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_5__GPIO1_5	IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_6__GPIO1_6	IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_7__GPIO1_7	IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_8__GPIO1_8	IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \
+						(PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP |  PAD_CTL_HYS))
+#define MX51_PAD_GPIO_1_9__GPIO1_9	IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL)
+
+/* EIM */
+#define MX51_PAD_EIM_DA0__EIM_DA0	IOMUX_PAD(0x7a8, 0x01c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA1__EIM_DA1	IOMUX_PAD(0x7a8, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA2__EIM_DA2	IOMUX_PAD(0x7a8, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA3__EIM_DA3	IOMUX_PAD(0x7a8, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA4__EIM_DA4	IOMUX_PAD(0x7ac, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA5__EIM_DA5	IOMUX_PAD(0x7ac, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA6__EIM_DA6	IOMUX_PAD(0x7ac, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA7__EIM_DA7	IOMUX_PAD(0x7ac, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_EIM_DA8__EIM_DA8	IOMUX_PAD(0x7b0, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA9__EIM_DA9	IOMUX_PAD(0x7b0, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA10__EIM_DA10	IOMUX_PAD(0x7b0, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA11__EIM_DA11	IOMUX_PAD(0x7b0, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA12__EIM_DA12	IOMUX_PAD(0x7bc, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA13__EIM_DA13	IOMUX_PAD(0x7bc, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA14__EIM_DA14	IOMUX_PAD(0x7bc, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA15__EIM_DA15	IOMUX_PAD(0x7bc, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+
+#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h
new file mode 100644
index 0000000..884f575
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_V1_H__
+#define __MACH_IOMUX_V1_H__
+
+/*
+*  GPIO Module and I/O Multiplexer
+*  x = 0..3 for reg_A, reg_B, reg_C, reg_D
+*/
+#define MXC_DDIR(x)	(0x00 + ((x) << 8))
+#define MXC_OCR1(x)	(0x04 + ((x) << 8))
+#define MXC_OCR2(x)	(0x08 + ((x) << 8))
+#define MXC_ICONFA1(x)	(0x0c + ((x) << 8))
+#define MXC_ICONFA2(x)	(0x10 + ((x) << 8))
+#define MXC_ICONFB1(x)	(0x14 + ((x) << 8))
+#define MXC_ICONFB2(x)	(0x18 + ((x) << 8))
+#define MXC_DR(x)	(0x1c + ((x) << 8))
+#define MXC_GIUS(x)	(0x20 + ((x) << 8))
+#define MXC_SSR(x)	(0x24 + ((x) << 8))
+#define MXC_ICR1(x)	(0x28 + ((x) << 8))
+#define MXC_ICR2(x)	(0x2c + ((x) << 8))
+#define MXC_IMR(x)	(0x30 + ((x) << 8))
+#define MXC_ISR(x)	(0x34 + ((x) << 8))
+#define MXC_GPR(x)	(0x38 + ((x) << 8))
+#define MXC_SWR(x)	(0x3c + ((x) << 8))
+#define MXC_PUEN(x)	(0x40 + ((x) << 8))
+
+#define MX1_NUM_GPIO_PORT	4
+#define MX21_NUM_GPIO_PORT	6
+#define MX27_NUM_GPIO_PORT	6
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA	(0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB	(1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC	(2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD	(3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE	(4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF	(5 << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT	(1 << 8)
+#define GPIO_IN		(0 << 8)
+#define GPIO_PUEN	(1 << 9)
+
+#define GPIO_PF		(1 << 10)
+#define GPIO_AF		(1 << 11)
+
+#define GPIO_OCR_SHIFT 12
+#define GPIO_OCR_MASK	(3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN	(0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN	(1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN	(2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO	(3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT	14
+#define GPIO_AOUT_MASK	(3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT	(0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR	(1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0	(2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1	(3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT	16
+#define GPIO_BOUT_MASK	(3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT	(0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR	(1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0	(2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1	(3 << GPIO_BOUT_SHIFT)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
+
+#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
+#define IRQ_GPIOF(x)  (IRQ_GPIOE(32) + x)
+
+extern int mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+		const char *label);
+extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
+
+#endif /* __MACH_IOMUX_V1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 1deda01..f2f73d3 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -81,11 +81,13 @@
 
 #define PAD_CTL_ODE			(1 << 3)
 
-#define PAD_CTL_DSE_STANDARD		(0 << 1)
-#define PAD_CTL_DSE_HIGH		(1 << 1)
-#define PAD_CTL_DSE_MAX			(2 << 1)
+#define PAD_CTL_DSE_LOW			(0 << 1)
+#define PAD_CTL_DSE_MED			(1 << 1)
+#define PAD_CTL_DSE_HIGH		(2 << 1)
+#define PAD_CTL_DSE_MAX			(3 << 1)
 
 #define PAD_CTL_SRE_FAST		(1 << 0)
+#define PAD_CTL_SRE_SLOW		(0 << 0)
 
 /*
  * setups a single pad in the iomuxer
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 011cfcd..3d226d7 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -1,102 +1,14 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
+ * Copyright (C) 2010 Uwe Kleine-Koenig, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __MACH_IOMUX_H__
+#define __MACH_IOMUX_H__
 
-#ifndef _MXC_IOMUX_H
-#define _MXC_IOMUX_H
-
-/*
-*  GPIO Module and I/O Multiplexer
-*  x = 0..3 for reg_A, reg_B, reg_C, reg_D
-*/
-#define VA_GPIO_BASE	IO_ADDRESS(GPIO_BASE_ADDR)
-#define MXC_DDIR(x)    (0x00 + ((x) << 8))
-#define MXC_OCR1(x)    (0x04 + ((x) << 8))
-#define MXC_OCR2(x)    (0x08 + ((x) << 8))
-#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
-#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
-#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
-#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
-#define MXC_DR(x)      (0x1c + ((x) << 8))
-#define MXC_GIUS(x)    (0x20 + ((x) << 8))
-#define MXC_SSR(x)     (0x24 + ((x) << 8))
-#define MXC_ICR1(x)    (0x28 + ((x) << 8))
-#define MXC_ICR2(x)    (0x2c + ((x) << 8))
-#define MXC_IMR(x)     (0x30 + ((x) << 8))
-#define MXC_ISR(x)     (0x34 + ((x) << 8))
-#define MXC_GPR(x)     (0x38 + ((x) << 8))
-#define MXC_SWR(x)     (0x3c + ((x) << 8))
-#define MXC_PUEN(x)    (0x40 + ((x) << 8))
-
-#ifdef CONFIG_ARCH_MX1
-# define GPIO_PORT_MAX  3
-#endif
-#ifdef CONFIG_ARCH_MX2
-# define GPIO_PORT_MAX  5
-#endif
-#ifdef CONFIG_ARCH_MX25
-# define GPIO_PORT_MAX  3
-#endif
-
-#ifndef GPIO_PORT_MAX
-# error "GPIO config port count unknown!"
-#endif
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT   (1 << 8)
-#define GPIO_IN    (0 << 8)
-#define GPIO_PUEN  (1 << 9)
-
-#define GPIO_PF    (1 << 10)
-#define GPIO_AF    (1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN   (0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN   (1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN   (2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO  (3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT 14
-#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT     (0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0   (2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1   (3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT 16
-#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT      (0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR  (1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0    (2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1    (3 << GPIO_BOUT_SHIFT)
-
+/* This file will go away, please include mach/iomux-mx... directly */
 
 #ifdef CONFIG_ARCH_MX1
 #include <mach/iomux-mx1.h>
@@ -110,25 +22,5 @@
 #include <mach/iomux-mx27.h>
 #endif
 #endif
-#ifdef CONFIG_ARCH_MX25
-#include <mach/iomux-mx25.h>
-#endif
 
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
-
-#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
-#define IRQ_GPIOF(x)  (IRQ_GPIOE(32) + x)
-
-
-extern void mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-	const char *label);
-extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
-
-#endif
+#endif /* __MACH_IOMUX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 0cb3476..86781f7 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -12,22 +12,29 @@
 #define __ASM_ARCH_MXC_IRQS_H__
 
 /*
- * So far all i.MX SoCs have 64 internal interrupts
+ * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
  */
+#ifdef CONFIG_MXC_TZIC
+#define MXC_INTERNAL_IRQS	128
+#else
 #define MXC_INTERNAL_IRQS	64
+#endif
 
 #define MXC_GPIO_IRQ_START	MXC_INTERNAL_IRQS
 
-#if defined CONFIG_ARCH_MX1
-#define MXC_GPIO_IRQS		(32 * 4)
-#elif defined CONFIG_ARCH_MX2
+/* these are ordered by size to support multi-SoC kernels */
+#if defined CONFIG_ARCH_MX2
 #define MXC_GPIO_IRQS		(32 * 6)
-#elif defined CONFIG_ARCH_MX3
-#define MXC_GPIO_IRQS		(32 * 3)
+#elif defined CONFIG_ARCH_MX1
+#define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MX25
 #define MXC_GPIO_IRQS		(32 * 4)
+#elif defined CONFIG_ARCH_MX5
+#define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MXC91231
 #define MXC_GPIO_IRQS		(32 * 4)
+#elif defined CONFIG_ARCH_MX3
+#define MXC_GPIO_IRQS		(32 * 3)
 #endif
 
 /*
@@ -51,6 +58,7 @@
 #else
 #define MX3_IPU_IRQS 0
 #endif
+/* REVISIT: Add IPU irqs on IMX51 */
 
 #define NR_IRQS			(MXC_IPU_IRQ_START + MX3_IPU_IRQS)
 
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index d3afafd..c4b40c3 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -11,30 +11,31 @@
 #ifndef __ASM_ARCH_MXC_MEMORY_H__
 #define __ASM_ARCH_MXC_MEMORY_H__
 
-#if defined CONFIG_ARCH_MX1
-#define PHYS_OFFSET		UL(0x08000000)
-#elif defined CONFIG_ARCH_MX2
-#ifdef CONFIG_MACH_MX21
-#define PHYS_OFFSET		UL(0xC0000000)
-#endif
-#ifdef CONFIG_MACH_MX27
-#define PHYS_OFFSET		UL(0xA0000000)
-#endif
-#elif defined CONFIG_ARCH_MX3
-#define PHYS_OFFSET		UL(0x80000000)
-#elif defined CONFIG_ARCH_MX25
-#define PHYS_OFFSET		UL(0x80000000)
-#elif defined CONFIG_ARCH_MXC91231
-#define PHYS_OFFSET		UL(0x90000000)
-#endif
+#define MX1_PHYS_OFFSET		UL(0x08000000)
+#define MX21_PHYS_OFFSET	UL(0xc0000000)
+#define MX25_PHYS_OFFSET	UL(0x80000000)
+#define MX27_PHYS_OFFSET	UL(0xa0000000)
+#define MX3x_PHYS_OFFSET	UL(0x80000000)
+#define MX51_PHYS_OFFSET	UL(0x90000000)
+#define MXC91231_PHYS_OFFSET	UL(0x90000000)
 
-#if defined(CONFIG_MX1_VIDEO)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for i.MX camera driver to capture at least four VGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO */
+#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
+# if defined CONFIG_ARCH_MX1
+#  define PHYS_OFFSET		MX1_PHYS_OFFSET
+# elif defined CONFIG_MACH_MX21
+#  define PHYS_OFFSET		MX21_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX25
+#  define PHYS_OFFSET		MX25_PHYS_OFFSET
+# elif defined CONFIG_MACH_MX27
+#  define PHYS_OFFSET		MX27_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX3
+#  define PHYS_OFFSET		MX3x_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MXC91231
+#  define PHYS_OFFSET		MXC91231_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX5
+#  define PHYS_OFFSET		MX51_PHYS_OFFSET
+# endif
+#endif
 
 #if defined(CONFIG_MX3_VIDEO)
 /*
@@ -42,6 +43,13 @@
  * This is required for mx3 camera driver to capture at least two QXGA frames.
  */
 #define CONSISTENT_DMA_SIZE SZ_8M
-#endif /* CONFIG_MX3_VIDEO */
+
+#elif defined(CONFIG_MX1_VIDEO)
+/*
+ * Increase size of DMA-consistent memory region.
+ * This is required for i.MX camera driver to capture at least four VGA frames.
+ */
+#define CONSISTENT_DMA_SIZE SZ_4M
+#endif /* CONFIG_MX1_VIDEO */
 
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mtd-xip.h b/arch/arm/plat-mxc/include/mach/mtd-xip.h
deleted file mode 100644
index 1ab1bba..0000000
--- a/arch/arm/plat-mxc/include/mach/mtd-xip.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- *
- * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>, Teltonika, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <mach/mxc_timer.h>
-
-#ifndef __ARCH_IMX_MTD_XIP_H__
-#define __ARCH_IMX_MTD_XIP_H__
-
-#ifdef CONFIG_ARCH_MX1
-/* AITC registers */
-#define AITC_BASE	IO_ADDRESS(AVIC_BASE_ADDR)
-#define NIPNDH		(AITC_BASE + 0x58)
-#define NIPNDL		(AITC_BASE + 0x5C)
-#define INTENABLEH	(AITC_BASE + 0x10)
-#define INTENABLEL	(AITC_BASE + 0x14)
-/* MTD macros */
-#define xip_irqpending() ((__raw_readl(INTENABLEH) &  __raw_readl(NIPNDH)) \
-			|| (__raw_readl(INTENABLEL) &  __raw_readl(NIPNDL)))
-#define xip_currtime()		(__raw_readl(TIMER_BASE + MXC_TCN))
-#define xip_elapsed_since(x)	(signed)((__raw_readl(TIMER_BASE + MXC_TCN) - (x)) / 96)
-#define xip_cpu_idle()		asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (0))
-#endif /* CONFIG_ARCH_MX1 */
-
-#endif /* __ARCH_IMX_MTD_XIP_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 1b2890a..5eba7e6 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -9,156 +9,289 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_MXC_MX1_H__
-#define __ASM_ARCH_MXC_MX1_H__
+#ifndef __MACH_MX1_H__
+#define __MACH_MX1_H__
 
 #include <mach/vmalloc.h>
 
 /*
  * Memory map
  */
-#define IMX_IO_PHYS	0x00200000
-#define IMX_IO_SIZE	0x00100000
-#define IMX_IO_BASE	VMALLOC_END
+#define MX1_IO_BASE_ADDR	0x00200000
+#define MX1_IO_SIZE		SZ_1M
+#define MX1_IO_BASE_ADDR_VIRT	VMALLOC_END
 
-#define IMX_CS0_PHYS	0x10000000
-#define IMX_CS0_SIZE	0x02000000
+#define MX1_CS0_PHYS		0x10000000
+#define MX1_CS0_SIZE		0x02000000
 
-#define IMX_CS1_PHYS	0x12000000
-#define IMX_CS1_SIZE	0x01000000
+#define MX1_CS1_PHYS		0x12000000
+#define MX1_CS1_SIZE		0x01000000
 
-#define IMX_CS2_PHYS	0x13000000
-#define IMX_CS2_SIZE	0x01000000
+#define MX1_CS2_PHYS		0x13000000
+#define MX1_CS2_SIZE		0x01000000
 
-#define IMX_CS3_PHYS	0x14000000
-#define IMX_CS3_SIZE	0x01000000
+#define MX1_CS3_PHYS		0x14000000
+#define MX1_CS3_SIZE		0x01000000
 
-#define IMX_CS4_PHYS	0x15000000
-#define IMX_CS4_SIZE	0x01000000
+#define MX1_CS4_PHYS		0x15000000
+#define MX1_CS4_SIZE		0x01000000
 
-#define IMX_CS5_PHYS	0x16000000
-#define IMX_CS5_SIZE	0x01000000
+#define MX1_CS5_PHYS		0x16000000
+#define MX1_CS5_SIZE		0x01000000
 
 /*
  *  Register BASEs, based on OFFSETs
  */
-#define AIPI1_BASE_ADDR		(0x00000 + IMX_IO_PHYS)
-#define WDT_BASE_ADDR		(0x01000 + IMX_IO_PHYS)
-#define TIM1_BASE_ADDR		(0x02000 + IMX_IO_PHYS)
-#define TIM2_BASE_ADDR		(0x03000 + IMX_IO_PHYS)
-#define RTC_BASE_ADDR		(0x04000 + IMX_IO_PHYS)
-#define LCDC_BASE_ADDR		(0x05000 + IMX_IO_PHYS)
-#define UART1_BASE_ADDR		(0x06000 + IMX_IO_PHYS)
-#define UART2_BASE_ADDR		(0x07000 + IMX_IO_PHYS)
-#define PWM_BASE_ADDR		(0x08000 + IMX_IO_PHYS)
-#define DMA_BASE_ADDR		(0x09000 + IMX_IO_PHYS)
-#define AIPI2_BASE_ADDR		(0x10000 + IMX_IO_PHYS)
-#define SIM_BASE_ADDR		(0x11000 + IMX_IO_PHYS)
-#define USBD_BASE_ADDR		(0x12000 + IMX_IO_PHYS)
-#define SPI1_BASE_ADDR		(0x13000 + IMX_IO_PHYS)
-#define MMC_BASE_ADDR		(0x14000 + IMX_IO_PHYS)
-#define ASP_BASE_ADDR		(0x15000 + IMX_IO_PHYS)
-#define BTA_BASE_ADDR		(0x16000 + IMX_IO_PHYS)
-#define I2C_BASE_ADDR		(0x17000 + IMX_IO_PHYS)
-#define SSI_BASE_ADDR		(0x18000 + IMX_IO_PHYS)
-#define SPI2_BASE_ADDR		(0x19000 + IMX_IO_PHYS)
-#define MSHC_BASE_ADDR		(0x1A000 + IMX_IO_PHYS)
-#define CCM_BASE_ADDR		(0x1B000 + IMX_IO_PHYS)
-#define SCM_BASE_ADDR		(0x1B804 + IMX_IO_PHYS)
-#define GPIO_BASE_ADDR		(0x1C000 + IMX_IO_PHYS)
-#define EIM_BASE_ADDR		(0x20000 + IMX_IO_PHYS)
-#define SDRAMC_BASE_ADDR	(0x21000 + IMX_IO_PHYS)
-#define MMA_BASE_ADDR		(0x22000 + IMX_IO_PHYS)
-#define AVIC_BASE_ADDR		(0x23000 + IMX_IO_PHYS)
-#define CSI_BASE_ADDR		(0x24000 + IMX_IO_PHYS)
+#define MX1_AIPI1_BASE_ADDR		(0x00000 + MX1_IO_BASE_ADDR)
+#define MX1_WDT_BASE_ADDR		(0x01000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM1_BASE_ADDR		(0x02000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM2_BASE_ADDR		(0x03000 + MX1_IO_BASE_ADDR)
+#define MX1_RTC_BASE_ADDR		(0x04000 + MX1_IO_BASE_ADDR)
+#define MX1_LCDC_BASE_ADDR		(0x05000 + MX1_IO_BASE_ADDR)
+#define MX1_UART1_BASE_ADDR		(0x06000 + MX1_IO_BASE_ADDR)
+#define MX1_UART2_BASE_ADDR		(0x07000 + MX1_IO_BASE_ADDR)
+#define MX1_PWM_BASE_ADDR		(0x08000 + MX1_IO_BASE_ADDR)
+#define MX1_DMA_BASE_ADDR		(0x09000 + MX1_IO_BASE_ADDR)
+#define MX1_AIPI2_BASE_ADDR		(0x10000 + MX1_IO_BASE_ADDR)
+#define MX1_SIM_BASE_ADDR		(0x11000 + MX1_IO_BASE_ADDR)
+#define MX1_USBD_BASE_ADDR		(0x12000 + MX1_IO_BASE_ADDR)
+#define MX1_SPI1_BASE_ADDR		(0x13000 + MX1_IO_BASE_ADDR)
+#define MX1_MMC_BASE_ADDR		(0x14000 + MX1_IO_BASE_ADDR)
+#define MX1_ASP_BASE_ADDR		(0x15000 + MX1_IO_BASE_ADDR)
+#define MX1_BTA_BASE_ADDR		(0x16000 + MX1_IO_BASE_ADDR)
+#define MX1_I2C_BASE_ADDR		(0x17000 + MX1_IO_BASE_ADDR)
+#define MX1_SSI_BASE_ADDR		(0x18000 + MX1_IO_BASE_ADDR)
+#define MX1_SPI2_BASE_ADDR		(0x19000 + MX1_IO_BASE_ADDR)
+#define MX1_MSHC_BASE_ADDR		(0x1A000 + MX1_IO_BASE_ADDR)
+#define MX1_CCM_BASE_ADDR		(0x1B000 + MX1_IO_BASE_ADDR)
+#define MX1_SCM_BASE_ADDR		(0x1B804 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
+#define MX1_EIM_BASE_ADDR		(0x20000 + MX1_IO_BASE_ADDR)
+#define MX1_SDRAMC_BASE_ADDR		(0x21000 + MX1_IO_BASE_ADDR)
+#define MX1_MMA_BASE_ADDR		(0x22000 + MX1_IO_BASE_ADDR)
+#define MX1_AVIC_BASE_ADDR		(0x23000 + MX1_IO_BASE_ADDR)
+#define MX1_CSI_BASE_ADDR		(0x24000 + MX1_IO_BASE_ADDR)
 
 /* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)	((x) - IMX_IO_PHYS + IMX_IO_BASE)
-
-/* define macros needed for entry-macro.S */
-#define AVIC_IO_ADDRESS(x)	IO_ADDRESS(x)
+#define MX1_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX1_IO))
 
 /* fixed interrput numbers */
-#define INT_SOFTINT		0
-#define CSI_INT			6
-#define DSPA_MAC_INT		7
-#define DSPA_INT		8
-#define COMP_INT		9
-#define MSHC_XINT		10
-#define GPIO_INT_PORTA		11
-#define GPIO_INT_PORTB		12
-#define GPIO_INT_PORTC		13
-#define LCDC_INT		14
-#define SIM_INT			15
-#define SIM_DATA_INT		16
-#define RTC_INT			17
-#define RTC_SAMINT		18
-#define UART2_MINT_PFERR	19
-#define UART2_MINT_RTS		20
-#define UART2_MINT_DTR		21
-#define UART2_MINT_UARTC	22
-#define UART2_MINT_TX		23
-#define UART2_MINT_RX		24
-#define UART1_MINT_PFERR	25
-#define UART1_MINT_RTS		26
-#define UART1_MINT_DTR		27
-#define UART1_MINT_UARTC	28
-#define UART1_MINT_TX		29
-#define UART1_MINT_RX		30
-#define VOICE_DAC_INT		31
-#define VOICE_ADC_INT		32
-#define PEN_DATA_INT		33
-#define PWM_INT			34
-#define SDHC_INT		35
-#define I2C_INT			39
-#define CSPI_INT		41
-#define SSI_TX_INT		42
-#define SSI_TX_ERR_INT		43
-#define SSI_RX_INT		44
-#define SSI_RX_ERR_INT		45
-#define TOUCH_INT		46
-#define USBD_INT0		47
-#define USBD_INT1		48
-#define USBD_INT2		49
-#define USBD_INT3		50
-#define USBD_INT4		51
-#define USBD_INT5		52
-#define USBD_INT6		53
-#define BTSYS_INT		55
-#define BTTIM_INT		56
-#define BTWUI_INT		57
-#define TIM2_INT		58
-#define TIM1_INT		59
-#define DMA_ERR			60
-#define DMA_INT			61
-#define GPIO_INT_PORTD		62
-#define WDT_INT			63
+#define MX1_INT_SOFTINT		0
+#define MX1_CSI_INT		6
+#define MX1_DSPA_MAC_INT	7
+#define MX1_DSPA_INT		8
+#define MX1_COMP_INT		9
+#define MX1_MSHC_XINT		10
+#define MX1_GPIO_INT_PORTA	11
+#define MX1_GPIO_INT_PORTB	12
+#define MX1_GPIO_INT_PORTC	13
+#define MX1_LCDC_INT		14
+#define MX1_SIM_INT		15
+#define MX1_SIM_DATA_INT	16
+#define MX1_RTC_INT		17
+#define MX1_RTC_SAMINT		18
+#define MX1_UART2_MINT_PFERR	19
+#define MX1_UART2_MINT_RTS	20
+#define MX1_UART2_MINT_DTR	21
+#define MX1_UART2_MINT_UARTC	22
+#define MX1_UART2_MINT_TX	23
+#define MX1_UART2_MINT_RX	24
+#define MX1_UART1_MINT_PFERR	25
+#define MX1_UART1_MINT_RTS	26
+#define MX1_UART1_MINT_DTR	27
+#define MX1_UART1_MINT_UARTC	28
+#define MX1_UART1_MINT_TX	29
+#define MX1_UART1_MINT_RX	30
+#define MX1_VOICE_DAC_INT	31
+#define MX1_VOICE_ADC_INT	32
+#define MX1_PEN_DATA_INT	33
+#define MX1_PWM_INT		34
+#define MX1_SDHC_INT		35
+#define MX1_I2C_INT		39
+#define MX1_CSPI_INT		41
+#define MX1_SSI_TX_INT		42
+#define MX1_SSI_TX_ERR_INT	43
+#define MX1_SSI_RX_INT		44
+#define MX1_SSI_RX_ERR_INT	45
+#define MX1_TOUCH_INT		46
+#define MX1_USBD_INT0		47
+#define MX1_USBD_INT1		48
+#define MX1_USBD_INT2		49
+#define MX1_USBD_INT3		50
+#define MX1_USBD_INT4		51
+#define MX1_USBD_INT5		52
+#define MX1_USBD_INT6		53
+#define MX1_BTSYS_INT		55
+#define MX1_BTTIM_INT		56
+#define MX1_BTWUI_INT		57
+#define MX1_TIM2_INT		58
+#define MX1_TIM1_INT		59
+#define MX1_DMA_ERR		60
+#define MX1_DMA_INT		61
+#define MX1_GPIO_INT_PORTD	62
+#define MX1_WDT_INT		63
 
 /* DMA */
-#define DMA_REQ_UART3_T		2
-#define DMA_REQ_UART3_R		3
-#define DMA_REQ_SSI2_T		4
-#define DMA_REQ_SSI2_R		5
-#define DMA_REQ_CSI_STAT	6
-#define DMA_REQ_CSI_R		7
-#define DMA_REQ_MSHC		8
-#define DMA_REQ_DSPA_DCT_DOUT	9
-#define DMA_REQ_DSPA_DCT_DIN	10
-#define DMA_REQ_DSPA_MAC	11
-#define DMA_REQ_EXT		12
-#define DMA_REQ_SDHC		13
-#define DMA_REQ_SPI1_R		14
-#define DMA_REQ_SPI1_T		15
-#define DMA_REQ_SSI_T		16
-#define DMA_REQ_SSI_R		17
-#define DMA_REQ_ASP_DAC		18
-#define DMA_REQ_ASP_ADC		19
-#define DMA_REQ_USP_EP(x)	(20 + (x))
-#define DMA_REQ_SPI2_R		26
-#define DMA_REQ_SPI2_T		27
-#define DMA_REQ_UART2_T		28
-#define DMA_REQ_UART2_R		29
-#define DMA_REQ_UART1_T		30
-#define DMA_REQ_UART1_R		31
+#define MX1_DMA_REQ_UART3_T		2
+#define MX1_DMA_REQ_UART3_R		3
+#define MX1_DMA_REQ_SSI2_T		4
+#define MX1_DMA_REQ_SSI2_R		5
+#define MX1_DMA_REQ_CSI_STAT		6
+#define MX1_DMA_REQ_CSI_R		7
+#define MX1_DMA_REQ_MSHC		8
+#define MX1_DMA_REQ_DSPA_DCT_DOUT	9
+#define MX1_DMA_REQ_DSPA_DCT_DIN	10
+#define MX1_DMA_REQ_DSPA_MAC		11
+#define MX1_DMA_REQ_EXT			12
+#define MX1_DMA_REQ_SDHC		13
+#define MX1_DMA_REQ_SPI1_R		14
+#define MX1_DMA_REQ_SPI1_T		15
+#define MX1_DMA_REQ_SSI_T		16
+#define MX1_DMA_REQ_SSI_R		17
+#define MX1_DMA_REQ_ASP_DAC		18
+#define MX1_DMA_REQ_ASP_ADC		19
+#define MX1_DMA_REQ_USP_EP(x)		(20 + (x))
+#define MX1_DMA_REQ_SPI2_R		26
+#define MX1_DMA_REQ_SPI2_T		27
+#define MX1_DMA_REQ_UART2_T		28
+#define MX1_DMA_REQ_UART2_R		29
+#define MX1_DMA_REQ_UART1_T		30
+#define MX1_DMA_REQ_UART1_R		31
 
-#endif /*  __ASM_ARCH_MXC_MX1_H__ */
+/*
+ * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS
+ * to not break drivers/usb/gadget/imx_udc.  Should go
+ * away after this driver uses the new name.
+ */
+#define USBD_INT0		MX1_USBD_INT0
+
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
+/* these should go away */
+#define IMX_IO_PHYS MX1_IO_BASE_ADDR
+#define IMX_IO_SIZE MX1_IO_SIZE
+#define IMX_IO_BASE MX1_IO_BASE_ADDR_VIRT
+#define IMX_CS0_PHYS MX1_CS0_PHYS
+#define IMX_CS0_SIZE MX1_CS0_SIZE
+#define IMX_CS1_PHYS MX1_CS1_PHYS
+#define IMX_CS1_SIZE MX1_CS1_SIZE
+#define IMX_CS2_PHYS MX1_CS2_PHYS
+#define IMX_CS2_SIZE MX1_CS2_SIZE
+#define IMX_CS3_PHYS MX1_CS3_PHYS
+#define IMX_CS3_SIZE MX1_CS3_SIZE
+#define IMX_CS4_PHYS MX1_CS4_PHYS
+#define IMX_CS4_SIZE MX1_CS4_SIZE
+#define IMX_CS5_PHYS MX1_CS5_PHYS
+#define IMX_CS5_SIZE MX1_CS5_SIZE
+#define AIPI1_BASE_ADDR MX1_AIPI1_BASE_ADDR
+#define WDT_BASE_ADDR MX1_WDT_BASE_ADDR
+#define TIM1_BASE_ADDR MX1_TIM1_BASE_ADDR
+#define TIM2_BASE_ADDR MX1_TIM2_BASE_ADDR
+#define RTC_BASE_ADDR MX1_RTC_BASE_ADDR
+#define LCDC_BASE_ADDR MX1_LCDC_BASE_ADDR
+#define UART1_BASE_ADDR MX1_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX1_UART2_BASE_ADDR
+#define PWM_BASE_ADDR MX1_PWM_BASE_ADDR
+#define DMA_BASE_ADDR MX1_DMA_BASE_ADDR
+#define AIPI2_BASE_ADDR MX1_AIPI2_BASE_ADDR
+#define SIM_BASE_ADDR MX1_SIM_BASE_ADDR
+#define USBD_BASE_ADDR MX1_USBD_BASE_ADDR
+#define SPI1_BASE_ADDR MX1_SPI1_BASE_ADDR
+#define MMC_BASE_ADDR MX1_MMC_BASE_ADDR
+#define ASP_BASE_ADDR MX1_ASP_BASE_ADDR
+#define BTA_BASE_ADDR MX1_BTA_BASE_ADDR
+#define I2C_BASE_ADDR MX1_I2C_BASE_ADDR
+#define SSI_BASE_ADDR MX1_SSI_BASE_ADDR
+#define SPI2_BASE_ADDR MX1_SPI2_BASE_ADDR
+#define MSHC_BASE_ADDR MX1_MSHC_BASE_ADDR
+#define CCM_BASE_ADDR MX1_CCM_BASE_ADDR
+#define SCM_BASE_ADDR MX1_SCM_BASE_ADDR
+#define GPIO_BASE_ADDR MX1_GPIO_BASE_ADDR
+#define EIM_BASE_ADDR MX1_EIM_BASE_ADDR
+#define SDRAMC_BASE_ADDR MX1_SDRAMC_BASE_ADDR
+#define MMA_BASE_ADDR MX1_MMA_BASE_ADDR
+#define AVIC_BASE_ADDR MX1_AVIC_BASE_ADDR
+#define CSI_BASE_ADDR MX1_CSI_BASE_ADDR
+#define IO_ADDRESS(x) MX1_IO_ADDRESS(x)
+#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x)
+#define INT_SOFTINT MX1_INT_SOFTINT
+#define CSI_INT MX1_CSI_INT
+#define DSPA_MAC_INT MX1_DSPA_MAC_INT
+#define DSPA_INT MX1_DSPA_INT
+#define COMP_INT MX1_COMP_INT
+#define MSHC_XINT MX1_MSHC_XINT
+#define GPIO_INT_PORTA MX1_GPIO_INT_PORTA
+#define GPIO_INT_PORTB MX1_GPIO_INT_PORTB
+#define GPIO_INT_PORTC MX1_GPIO_INT_PORTC
+#define LCDC_INT MX1_LCDC_INT
+#define SIM_INT MX1_SIM_INT
+#define SIM_DATA_INT MX1_SIM_DATA_INT
+#define RTC_INT MX1_RTC_INT
+#define RTC_SAMINT MX1_RTC_SAMINT
+#define UART2_MINT_PFERR MX1_UART2_MINT_PFERR
+#define UART2_MINT_RTS MX1_UART2_MINT_RTS
+#define UART2_MINT_DTR MX1_UART2_MINT_DTR
+#define UART2_MINT_UARTC MX1_UART2_MINT_UARTC
+#define UART2_MINT_TX MX1_UART2_MINT_TX
+#define UART2_MINT_RX MX1_UART2_MINT_RX
+#define UART1_MINT_PFERR MX1_UART1_MINT_PFERR
+#define UART1_MINT_RTS MX1_UART1_MINT_RTS
+#define UART1_MINT_DTR MX1_UART1_MINT_DTR
+#define UART1_MINT_UARTC MX1_UART1_MINT_UARTC
+#define UART1_MINT_TX MX1_UART1_MINT_TX
+#define UART1_MINT_RX MX1_UART1_MINT_RX
+#define VOICE_DAC_INT MX1_VOICE_DAC_INT
+#define VOICE_ADC_INT MX1_VOICE_ADC_INT
+#define PEN_DATA_INT MX1_PEN_DATA_INT
+#define PWM_INT MX1_PWM_INT
+#define SDHC_INT MX1_SDHC_INT
+#define I2C_INT MX1_I2C_INT
+#define CSPI_INT MX1_CSPI_INT
+#define SSI_TX_INT MX1_SSI_TX_INT
+#define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT
+#define SSI_RX_INT MX1_SSI_RX_INT
+#define SSI_RX_ERR_INT MX1_SSI_RX_ERR_INT
+#define TOUCH_INT MX1_TOUCH_INT
+#define USBD_INT1 MX1_USBD_INT1
+#define USBD_INT2 MX1_USBD_INT2
+#define USBD_INT3 MX1_USBD_INT3
+#define USBD_INT4 MX1_USBD_INT4
+#define USBD_INT5 MX1_USBD_INT5
+#define USBD_INT6 MX1_USBD_INT6
+#define BTSYS_INT MX1_BTSYS_INT
+#define BTTIM_INT MX1_BTTIM_INT
+#define BTWUI_INT MX1_BTWUI_INT
+#define TIM2_INT MX1_TIM2_INT
+#define TIM1_INT MX1_TIM1_INT
+#define DMA_ERR MX1_DMA_ERR
+#define DMA_INT MX1_DMA_INT
+#define GPIO_INT_PORTD MX1_GPIO_INT_PORTD
+#define WDT_INT MX1_WDT_INT
+#define DMA_REQ_UART3_T MX1_DMA_REQ_UART3_T
+#define DMA_REQ_UART3_R MX1_DMA_REQ_UART3_R
+#define DMA_REQ_SSI2_T MX1_DMA_REQ_SSI2_T
+#define DMA_REQ_SSI2_R MX1_DMA_REQ_SSI2_R
+#define DMA_REQ_CSI_STAT MX1_DMA_REQ_CSI_STAT
+#define DMA_REQ_CSI_R MX1_DMA_REQ_CSI_R
+#define DMA_REQ_MSHC MX1_DMA_REQ_MSHC
+#define DMA_REQ_DSPA_DCT_DOUT MX1_DMA_REQ_DSPA_DCT_DOUT
+#define DMA_REQ_DSPA_DCT_DIN MX1_DMA_REQ_DSPA_DCT_DIN
+#define DMA_REQ_DSPA_MAC MX1_DMA_REQ_DSPA_MAC
+#define DMA_REQ_EXT MX1_DMA_REQ_EXT
+#define DMA_REQ_SDHC MX1_DMA_REQ_SDHC
+#define DMA_REQ_SPI1_R MX1_DMA_REQ_SPI1_R
+#define DMA_REQ_SPI1_T MX1_DMA_REQ_SPI1_T
+#define DMA_REQ_SSI_T MX1_DMA_REQ_SSI_T
+#define DMA_REQ_SSI_R MX1_DMA_REQ_SSI_R
+#define DMA_REQ_ASP_DAC MX1_DMA_REQ_ASP_DAC
+#define DMA_REQ_ASP_ADC MX1_DMA_REQ_ASP_ADC
+#define DMA_REQ_USP_EP(x) MX1_DMA_REQ_USP_EP(x)
+#define DMA_REQ_SPI2_R MX1_DMA_REQ_SPI2_R
+#define DMA_REQ_SPI2_T MX1_DMA_REQ_SPI2_T
+#define DMA_REQ_UART2_T MX1_DMA_REQ_UART2_T
+#define DMA_REQ_UART2_R MX1_DMA_REQ_UART2_R
+#define DMA_REQ_UART1_T MX1_DMA_REQ_UART1_T
+#define DMA_REQ_UART1_R MX1_DMA_REQ_UART1_R
+#endif /* ifdef IMX_NEEDS_DEPRECATED_SYMBOLS */
+
+#endif /* ifndef __MACH_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index bb297d8..ed98b9c 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -22,8 +22,8 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX21_H__
-#define __ASM_ARCH_MXC_MX21_H__
+#ifndef __MACH_MX21_H__
+#define __MACH_MX21_H__
 
 #define MX21_AIPI_BASE_ADDR		0x10000000
 #define MX21_AIPI_BASE_ADDR_VIRT	0xf4000000
@@ -92,6 +92,11 @@
 
 #define MX21_IRAM_BASE_ADDR		0xffffe800	/* internal ram */
 
+#define MX21_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX21_AIPI) ?:					\
+	IMX_IO_ADDRESS(x, MX21_SAHB1) ?:				\
+	IMX_IO_ADDRESS(x, MX21_X_MEMC))
+
 /* fixed interrupt numbers */
 #define MX21_INT_CSPI3		6
 #define MX21_INT_GPIO		8
@@ -179,6 +184,7 @@
 #define MX21_DMA_REQ_CSI_STAT	30
 #define MX21_DMA_REQ_CSI_RX	31
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
 #define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
@@ -211,5 +217,6 @@
 #define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
 #define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
 #define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX21_H__ */
+#endif /* ifndef __MACH_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 854e2dc..4eb6e33 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -22,27 +22,27 @@
 #define MX25_GPIO3_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
 #define MX25_GPIO4_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
 
-#define MX25_AIPS1_IO_ADDRESS(x)  \
-	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
-#define MX25_AIPS2_IO_ADDRESS(x)  \
-	(((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
-#define MX25_AVIC_IO_ADDRESS(x)  \
-	(((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
+#define MX25_IO_ADDRESS(x) (					\
+	IMX_IO_ADDRESS(x, MX25_AIPS1) ?:			\
+	IMX_IO_ADDRESS(x, MX25_AIPS2) ?:			\
+	IMX_IO_ADDRESS(x, MX25_AVIC))
 
-#define __in_range(addr, name)	((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
-
-#define MX25_IO_ADDRESS(x)					\
-	(void __force __iomem *)				\
-	(__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) :	\
-	__in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) :	\
-	__in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) :	\
-	0xDEADBEEF)
-
-#define UART1_BASE_ADDR			0x43f90000
-#define UART2_BASE_ADDR			0x43f94000
+#define MX25_UART1_BASE_ADDR		0x43f90000
+#define MX25_UART2_BASE_ADDR		0x43f94000
 
 #define MX25_FEC_BASE_ADDR		0x50038000
+#define MX25_NFC_BASE_ADDR		0xbb000000
+#define MX25_DRYICE_BASE_ADDR		0x53ffc000
+#define MX25_LCDC_BASE_ADDR		0x53fbc000
 
+#define MX25_INT_DRYICE	25
 #define MX25_INT_FEC	57
+#define MX25_INT_NANDFC	33
+#define MX25_INT_LCDC	39
 
-#endif /* __MACH_MX25_H__ */
+#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS)
+#define UART1_BASE_ADDR			MX25_UART1_BASE_ADDR
+#define UART2_BASE_ADDR			MX25_UART2_BASE_ADDR
+#endif
+
+#endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index e2ae19f5..bae9cd7 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -21,8 +21,12 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX27_H__
-#define __ASM_ARCH_MXC_MX27_H__
+#ifndef __MACH_MX27_H__
+#define __MACH_MX27_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
 
 #define MX27_AIPI_BASE_ADDR		0x10000000
 #define MX27_AIPI_BASE_ADDR_VIRT	0xf4000000
@@ -109,11 +113,31 @@
 #define MX27_M3IF_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x3000)
 #define MX27_PCMCIA_CTL_BASE_ADDR		(MX27_X_MEMC_BASE_ADDR + 0x4000)
 
+#define MX27_WEIM_CSCRx_BASE_ADDR(cs)	(MX27_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX27_WEIM_CSCRxU(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX27_WEIM_CSCRxL(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX27_WEIM_CSCRxA(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
 #define MX27_PCMCIA_MEM_BASE_ADDR	0xdc000000
 
 /* IRAM */
 #define MX27_IRAM_BASE_ADDR		0xffff4c00	/* internal ram */
 
+#define MX27_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX27_AIPI) ?:					\
+	IMX_IO_ADDRESS(x, MX27_SAHB1) ?:				\
+	IMX_IO_ADDRESS(x, MX27_X_MEMC))
+
+#ifndef __ASSEMBLER__
+static inline void mx27_setup_weimcs(size_t cs,
+		unsigned upper, unsigned lower, unsigned addional)
+{
+	__raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs)));
+	__raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs)));
+	__raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs)));
+}
+#endif
+
 /* fixed interrupt numbers */
 #define MX27_INT_I2C2		1
 #define MX27_INT_GPT6		2
@@ -225,6 +249,7 @@
 extern int mx27_revision(void);
 #endif
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
 #define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
@@ -292,5 +317,6 @@
 #define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
 #define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
 #define DMA_REQ_NFC MX27_DMA_REQ_NFC
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX27_H__ */
+#endif /* ifndef __MACH_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index f2eaf14..afb895a 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -20,8 +20,8 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX2x_H__
-#define __ASM_ARCH_MXC_MX2x_H__
+#ifndef __MACH_MX2x_H__
+#define __MACH_MX2x_H__
 
 /* The following addresses are common between i.MX21 and i.MX27 */
 
@@ -176,6 +176,7 @@
 #define MX2x_DMA_REQ_CSI_STAT	30
 #define MX2x_DMA_REQ_CSI_RX	31
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
 #define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
@@ -287,5 +288,6 @@
 #define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
 #define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
 #define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX2x_H__ */
+#endif /* ifndef __MACH_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index b8b47d1..fb90e11 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,3 +1,10 @@
+#ifndef __MACH_MX31_H__
+#define __MACH_MX31_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+
 /*
  * IRAM
  */
@@ -107,8 +114,30 @@
 #define MX31_EMI_CTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x4000)
 #define MX31_PCMCIA_CTL_BASE_ADDR		MX31_EMI_CTL_BASE_ADDR
 
+#define MX31_WEIM_CSCRx_BASE_ADDR(cs)	(MX31_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX31_WEIM_CSCRxU(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX31_WEIM_CSCRxL(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX31_WEIM_CSCRxA(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
 #define MX31_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
+#define MX31_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX31_AIPS1) ?:				\
+	IMX_IO_ADDRESS(x, MX31_AIPS2) ?:				\
+	IMX_IO_ADDRESS(x, MX31_AVIC) ?:					\
+	IMX_IO_ADDRESS(x, MX31_X_MEMC) ?:				\
+	IMX_IO_ADDRESS(x, MX31_SPBA0))
+
+#ifndef __ASSEMBLER__
+static inline void mx31_setup_weimcs(size_t cs,
+		unsigned upper, unsigned lower, unsigned addional)
+{
+	__raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
+	__raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
+	__raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
+}
+#endif
+
 #define MX31_INT_I2C3		3
 #define MX31_INT_I2C2		4
 #define MX31_INT_MPEG4_ENCODER	5
@@ -186,6 +215,7 @@
 #define MX31_SYSTEM_REV_MIN		MX31_CHIP_REV_1_0
 #define MX31_SYSTEM_REV_NUM		3
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
 #define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
@@ -216,3 +246,6 @@
 #define MXC_INT_UART5 MX31_INT_UART5
 #define MXC_INT_CCM MX31_INT_CCM
 #define MXC_INT_PCMCIA MX31_INT_PCMCIA
+#endif
+
+#endif /* ifndef __MACH_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index af871bc..526a558 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -1,3 +1,5 @@
+#ifndef __MACH_MX35_H__
+#define __MACH_MX35_H__
 /*
  * IRAM
  */
@@ -104,6 +106,13 @@
 #define MX35_NFC_BASE_ADDR		0xbb000000
 #define MX35_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
+#define MX35_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX35_AIPS1) ?:				\
+	IMX_IO_ADDRESS(x, MX35_AIPS2) ?:				\
+	IMX_IO_ADDRESS(x, MX35_AVIC) ?:					\
+	IMX_IO_ADDRESS(x, MX35_X_MEMC) ?:				\
+	IMX_IO_ADDRESS(x, MX35_SPBA0))
+
 /*
  * Interrupt numbers
  */
@@ -180,6 +189,7 @@
 #define MX35_SYSTEM_REV_MIN		MX35_CHIP_REV_1_0
 #define MX35_SYSTEM_REV_NUM		3
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
 #define MXC_INT_OWIRE MX35_INT_OWIRE
@@ -195,3 +205,6 @@
 #define MXC_INT_MLB MX35_INT_MLB
 #define MXC_INT_SPDIF MX35_INT_SPDIF
 #define MXC_INT_FEC MX35_INT_FEC
+#endif
+
+#endif /* ifndef __MACH_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index be69272..7a356de3 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
+#ifndef __MACH_MX3x_H__
+#define __MACH_MX3x_H__
 
 /*
  * MX31 memory map:
@@ -269,6 +269,7 @@
 }
 #endif
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
 #define L2CC_SIZE MX3x_L2CC_SIZE
@@ -401,5 +402,6 @@
 #define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
 #define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
 #define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
+#endif
 
-#endif /*  __ASM_ARCH_MXC_MX31_H__ */
+#endif /* ifndef __MACH_MX3x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
new file mode 100644
index 0000000..771532b
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -0,0 +1,454 @@
+#ifndef __ASM_ARCH_MXC_MX51_H__
+#define __ASM_ARCH_MXC_MX51_H__
+
+/*
+ * MX51 memory map:
+ *
+ *
+ * Virt		Phys		Size	What
+ * ---------------------------------------------------------------------------
+ * FA3E0000	1FFE0000	128K	IRAM (SCCv2 RAM)
+ *         	30000000	256M	GPU
+ *         	40000000	512M	IPU
+ * FA200000	60000000	1M	DEBUG
+ * FB100000	70000000	1M	SPBA 0
+ * FB000000	73F00000	1M	AIPS 1
+ * FB200000	83F00000	1M	AIPS 2
+ * FA100000	8FFFC000	16K	TZIC (interrupt controller)
+ *         	90000000	256M	CSD0 SDRAM/DDR
+ *         	A0000000	256M	CSD1 SDRAM/DDR
+ *         	B0000000	128M	CS0 Flash
+ *         	B8000000	128M	CS1 Flash
+ *         	C0000000	128M	CS2 Flash
+ *         	C8000000	64M	CS3 Flash
+ *         	CC000000	32M	CS4 SRAM
+ *         	CE000000	32M	CS5 SRAM
+ * F9000000	CFFF0000	64K	NFC (NAND Flash AXI)
+ *
+ */
+
+/*
+ * IRAM
+ */
+#define MX51_IRAM_BASE_ADDR		0x1FFE0000	/* internal ram */
+#define MX51_IRAM_BASE_ADDR_VIRT	0xFA3E0000
+#define MX51_IRAM_PARTITIONS		16
+#define MX51_IRAM_PARTITIONS_TO1	12
+#define MX51_IRAM_SIZE		(MX51_IRAM_PARTITIONS * SZ_8K)	/* 128KB */
+
+/*
+ * NFC
+ */
+#define MX51_NFC_AXI_BASE_ADDR		0xCFFF0000	/* NAND flash AXI */
+#define MX51_NFC_AXI_BASE_ADDR_VIRT	0xF9000000
+#define MX51_NFC_AXI_SIZE		SZ_64K
+
+/*
+ * Graphics Memory of GPU
+ */
+#define MX51_GPU_BASE_ADDR		0x20000000
+#define MX51_GPU2D_BASE_ADDR		0xD0000000
+
+#define MX51_TZIC_BASE_ADDR		0x8FFFC000
+#define MX51_TZIC_BASE_ADDR_VIRT	0xFA100000
+#define MX51_TZIC_SIZE			SZ_16K
+
+#define MX51_DEBUG_BASE_ADDR		0x60000000
+#define MX51_DEBUG_BASE_ADDR_VIRT	0xFA200000
+#define MX51_DEBUG_SIZE			SZ_1M
+#define MX51_ETB_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00001000)
+#define MX51_ETM_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00002000)
+#define MX51_TPIU_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00003000)
+#define MX51_CTI0_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00004000)
+#define MX51_CTI1_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00005000)
+#define MX51_CTI2_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00006000)
+#define MX51_CTI3_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00007000)
+#define MX51_CORTEX_DBG_BASE_ADDR	(MX51_DEBUG_BASE_ADDR + 0x00008000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX51_SPBA0_BASE_ADDR 		0x70000000
+#define MX51_SPBA0_BASE_ADDR_VIRT	0xFB100000
+#define MX51_SPBA0_SIZE			SZ_1M
+
+#define MX51_MMC_SDHC1_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00004000)
+#define MX51_MMC_SDHC2_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00008000)
+#define MX51_UART3_BASE_ADDR 		(MX51_SPBA0_BASE_ADDR + 0x0000C000)
+#define MX51_CSPI1_BASE_ADDR 		(MX51_SPBA0_BASE_ADDR + 0x00010000)
+#define MX51_SSI2_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00014000)
+#define MX51_MMC_SDHC3_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00020000)
+#define MX51_MMC_SDHC4_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00024000)
+#define MX51_SPDIF_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00028000)
+#define MX51_ATA_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00030000)
+#define MX51_SLIM_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00034000)
+#define MX51_HSI2C_DMA_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00038000)
+#define MX51_SPBA_CTRL_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * defines for SPBA modules
+ */
+#define MX51_SPBA_SDHC1	0x04
+#define MX51_SPBA_SDHC2	0x08
+#define MX51_SPBA_UART3	0x0C
+#define MX51_SPBA_CSPI1	0x10
+#define MX51_SPBA_SSI2	0x14
+#define MX51_SPBA_SDHC3	0x20
+#define MX51_SPBA_SDHC4	0x24
+#define MX51_SPBA_SPDIF	0x28
+#define MX51_SPBA_ATA	0x30
+#define MX51_SPBA_SLIM	0x34
+#define MX51_SPBA_HSI2C	0x38
+#define MX51_SPBA_CTRL	0x3C
+
+/*
+ * AIPS 1
+ */
+#define MX51_AIPS1_BASE_ADDR 	0x73F00000
+#define MX51_AIPS1_BASE_ADDR_VIRT	0xFB000000
+#define MX51_AIPS1_SIZE		SZ_1M
+
+#define MX51_OTG_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00080000)
+#define MX51_GPIO1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00084000)
+#define MX51_GPIO2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00088000)
+#define MX51_GPIO3_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x0008C000)
+#define MX51_GPIO4_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00090000)
+#define MX51_KPP_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00094000)
+#define MX51_WDOG_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00098000)
+#define MX51_WDOG2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x0009C000)
+#define MX51_GPT1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A0000)
+#define MX51_SRTC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A4000)
+#define MX51_IOMUXC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A8000)
+#define MX51_EPIT1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000AC000)
+#define MX51_EPIT2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B0000)
+#define MX51_PWM1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B4000)
+#define MX51_PWM2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B8000)
+#define MX51_UART1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000BC000)
+#define MX51_UART2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000C0000)
+#define MX51_SRC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D0000)
+#define MX51_CCM_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D4000)
+#define MX51_GPC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D8000)
+
+/*
+ * Defines for modules using static and dynamic DMA channels
+ */
+#define MX51_MXC_DMA_CHANNEL_IRAM	30
+#define MX51_MXC_DMA_CHANNEL_SPDIF_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC1	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC2	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI2_RX	MXC_DMA_DYNAMIC_CHANNEL
+#ifdef CONFIG_SDMA_IRAM
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX	(MX51_MXC_DMA_CHANNEL_IRAM + 1)
+#else				/*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX	MXC_DMA_DYNAMIC_CHANNEL
+#endif				/*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_CSPI1_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI1_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MEMORY	MXC_DMA_DYNAMIC_CHANNEL
+
+/*
+ * AIPS 2
+ */
+#define MX51_AIPS2_BASE_ADDR		0x83F00000
+#define MX51_AIPS2_BASE_ADDR_VIRT	0xFB200000
+#define MX51_AIPS2_SIZE			SZ_1M
+
+#define MX51_PLL1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00080000)
+#define MX51_PLL2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00084000)
+#define MX51_PLL3_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00088000)
+#define MX51_AHBMAX_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00094000)
+#define MX51_IIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00098000)
+#define MX51_CSU_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x0009C000)
+#define MX51_ARM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000A0000)
+#define MX51_OWIRE_BASE_ADDR 	(MX51_AIPS2_BASE_ADDR + 0x000A4000)
+#define MX51_FIRI_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000A8000)
+#define MX51_CSPI2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000AC000)
+#define MX51_SDMA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B0000)
+#define MX51_SCC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B4000)
+#define MX51_ROMCP_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B8000)
+#define MX51_RTIC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000BC000)
+#define MX51_CSPI3_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C0000)
+#define MX51_I2C2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C4000)
+#define MX51_I2C1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C8000)
+#define MX51_SSI1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000CC000)
+#define MX51_AUDMUX_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D0000)
+#define MX51_M4IF_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D8000)
+#define MX51_ESDCTL_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D9000)
+#define MX51_WEIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DA000)
+#define MX51_NFC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DB000)
+#define MX51_EMI_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DBF00)
+#define MX51_MIPI_HSC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DC000)
+#define MX51_ATA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E0000)
+#define MX51_SIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E4000)
+#define MX51_SSI3BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E8000)
+#define MX51_MXC_FEC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000EC000)
+#define MX51_TVE_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F0000)
+#define MX51_VPU_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F4000)
+#define MX51_SAHARA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F8000)
+
+/*
+ * Memory regions and CS
+ */
+#define MX51_GPU_CTRL_BASE_ADDR		0x30000000
+#define MX51_IPU_CTRL_BASE_ADDR		0x40000000
+#define MX51_CSD0_BASE_ADDR		0x90000000
+#define MX51_CSD1_BASE_ADDR		0xA0000000
+#define MX51_CS0_BASE_ADDR		0xB0000000
+#define MX51_CS1_BASE_ADDR		0xB8000000
+#define MX51_CS2_BASE_ADDR		0xC0000000
+#define MX51_CS3_BASE_ADDR		0xC8000000
+#define MX51_CS4_BASE_ADDR		0xCC000000
+#define MX51_CS5_BASE_ADDR		0xCE000000
+
+/* Does given address belongs to the specified memory region? */
+#define ADDRESS_IN_REGION(addr, start, size)			\
+	(((addr) >= (start)) && ((addr) < (start)+(size)))
+
+/* Does given address belongs to the specified named `module'? */
+#define MX51_IS_MODULE(addr, module)			       \
+	ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \
+				MX51_ ## module ## _SIZE)
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+
+#define MX51_IO_ADDRESS(x)					\
+	(void __iomem *)					\
+	(MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \
+	0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define MX51_IRAM_IO_ADDRESS(x)  \
+	(((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT)
+
+#define MX51_TZIC_IO_ADDRESS(x)  \
+	(((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT)
+
+#define MX51_DEBUG_IO_ADDRESS(x)  \
+	(((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT)
+
+#define MX51_SPBA0_IO_ADDRESS(x)  \
+	(((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT)
+
+#define MX51_AIPS1_IO_ADDRESS(x)  \
+	(((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
+
+#define MX51_AIPS2_IO_ADDRESS(x)  \
+	(((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT)
+
+#define MX51_NFC_AXI_IO_ADDRESS(x) \
+	(((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT)
+
+#define MX51_IS_MEM_DEVICE_NONSHARED(x)		0
+
+/*
+ * DMA request assignments
+ */
+#define MX51_DMA_REQ_SSI3_TX1	47
+#define MX51_DMA_REQ_SSI3_RX1	46
+#define MX51_DMA_REQ_SPDIF	45
+#define MX51_DMA_REQ_UART3_TX	44
+#define MX51_DMA_REQ_UART3_RX	43
+#define MX51_DMA_REQ_SLIM_B_TX	42
+#define MX51_DMA_REQ_SDHC4	41
+#define MX51_DMA_REQ_SDHC3	40
+#define MX51_DMA_REQ_CSPI_TX	39
+#define MX51_DMA_REQ_CSPI_RX	38
+#define MX51_DMA_REQ_SSI3_TX2	37
+#define MX51_DMA_REQ_IPU	36
+#define MX51_DMA_REQ_SSI3_RX2	35
+#define MX51_DMA_REQ_EPIT2	34
+#define MX51_DMA_REQ_CTI2_1	33
+#define MX51_DMA_REQ_EMI_WR	32
+#define MX51_DMA_REQ_CTI2_0	31
+#define MX51_DMA_REQ_EMI_RD	30
+#define MX51_DMA_REQ_SSI1_TX1	29
+#define MX51_DMA_REQ_SSI1_RX1	28
+#define MX51_DMA_REQ_SSI1_TX2	27
+#define MX51_DMA_REQ_SSI1_RX2	26
+#define MX51_DMA_REQ_SSI2_TX1	25
+#define MX51_DMA_REQ_SSI2_RX1	24
+#define MX51_DMA_REQ_SSI2_TX2	23
+#define MX51_DMA_REQ_SSI2_RX2	22
+#define MX51_DMA_REQ_SDHC2	21
+#define MX51_DMA_REQ_SDHC1	20
+#define MX51_DMA_REQ_UART1_TX	19
+#define MX51_DMA_REQ_UART1_RX	18
+#define MX51_DMA_REQ_UART2_TX	17
+#define MX51_DMA_REQ_UART2_RX	16
+#define MX51_DMA_REQ_GPU	15
+#define MX51_DMA_REQ_EXTREQ1	14
+#define MX51_DMA_REQ_FIRI_TX	13
+#define MX51_DMA_REQ_FIRI_RX	12
+#define MX51_DMA_REQ_HS_I2C_RX	11
+#define MX51_DMA_REQ_HS_I2C_TX	10
+#define MX51_DMA_REQ_CSPI2_TX	9
+#define MX51_DMA_REQ_CSPI2_RX	8
+#define MX51_DMA_REQ_CSPI1_TX	7
+#define MX51_DMA_REQ_CSPI1_RX	6
+#define MX51_DMA_REQ_SLIM_B	5
+#define MX51_DMA_REQ_ATA_TX_END	4
+#define MX51_DMA_REQ_ATA_TX	3
+#define MX51_DMA_REQ_ATA_RX	2
+#define MX51_DMA_REQ_GPC	1
+#define MX51_DMA_REQ_VPU	0
+
+/*
+ * Interrupt numbers
+ */
+#define MX51_MXC_INT_BASE	0
+#define MX51_MXC_INT_RESV0	0
+#define MX51_MXC_INT_MMC_SDHC1	1
+#define MX51_MXC_INT_MMC_SDHC2	2
+#define MX51_MXC_INT_MMC_SDHC3	3
+#define MX51_MXC_INT_MMC_SDHC4	4
+#define MX51_MXC_INT_RESV5	5
+#define MX51_MXC_INT_SDMA	6
+#define MX51_MXC_INT_IOMUX	7
+#define MX51_MXC_INT_NFC	8
+#define MX51_MXC_INT_VPU	9
+#define MX51_MXC_INT_IPU_ERR	10
+#define MX51_MXC_INT_IPU_SYN	11
+#define MX51_MXC_INT_GPU	12
+#define MX51_MXC_INT_RESV13	13
+#define MX51_MXC_INT_USB_H1	14
+#define MX51_MXC_INT_EMI	15
+#define MX51_MXC_INT_USB_H2	16
+#define MX51_MXC_INT_USB_H3	17
+#define MX51_MXC_INT_USB_OTG	18
+#define MX51_MXC_INT_SAHARA_H0	19
+#define MX51_MXC_INT_SAHARA_H1	20
+#define MX51_MXC_INT_SCC_SMN	21
+#define MX51_MXC_INT_SCC_STZ	22
+#define MX51_MXC_INT_SCC_SCM	23
+#define MX51_MXC_INT_SRTC_NTZ	24
+#define MX51_MXC_INT_SRTC_TZ	25
+#define MX51_MXC_INT_RTIC	26
+#define MX51_MXC_INT_CSU	27
+#define MX51_MXC_INT_SLIM_B	28
+#define MX51_MXC_INT_SSI1	29
+#define MX51_MXC_INT_SSI2	30
+#define MX51_MXC_INT_UART1	31
+#define MX51_MXC_INT_UART2	32
+#define MX51_MXC_INT_UART3	33
+#define MX51_MXC_INT_RESV34	34
+#define MX51_MXC_INT_RESV35	35
+#define MX51_MXC_INT_CSPI1	36
+#define MX51_MXC_INT_CSPI2	37
+#define MX51_MXC_INT_CSPI	38
+#define MX51_MXC_INT_GPT	39
+#define MX51_MXC_INT_EPIT1	40
+#define MX51_MXC_INT_EPIT2	41
+#define MX51_MXC_INT_GPIO1_INT7	42
+#define MX51_MXC_INT_GPIO1_INT6	43
+#define MX51_MXC_INT_GPIO1_INT5	44
+#define MX51_MXC_INT_GPIO1_INT4	45
+#define MX51_MXC_INT_GPIO1_INT3	46
+#define MX51_MXC_INT_GPIO1_INT2	47
+#define MX51_MXC_INT_GPIO1_INT1	48
+#define MX51_MXC_INT_GPIO1_INT0	49
+#define MX51_MXC_INT_GPIO1_LOW	50
+#define MX51_MXC_INT_GPIO1_HIGH	51
+#define MX51_MXC_INT_GPIO2_LOW	52
+#define MX51_MXC_INT_GPIO2_HIGH	53
+#define MX51_MXC_INT_GPIO3_LOW	54
+#define MX51_MXC_INT_GPIO3_HIGH	55
+#define MX51_MXC_INT_GPIO4_LOW	56
+#define MX51_MXC_INT_GPIO4_HIGH	57
+#define MX51_MXC_INT_WDOG1	58
+#define MX51_MXC_INT_WDOG2	59
+#define MX51_MXC_INT_KPP	60
+#define MX51_MXC_INT_PWM1	61
+#define MX51_MXC_INT_I2C1	62
+#define MX51_MXC_INT_I2C2	63
+#define MX51_MXC_INT_HS_I2C	64
+#define MX51_MXC_INT_RESV65	65
+#define MX51_MXC_INT_RESV66	66
+#define MX51_MXC_INT_SIM_IPB	67
+#define MX51_MXC_INT_SIM_DAT	68
+#define MX51_MXC_INT_IIM	69
+#define MX51_MXC_INT_ATA	70
+#define MX51_MXC_INT_CCM1	71
+#define MX51_MXC_INT_CCM2	72
+#define MX51_MXC_INT_GPC1	73
+#define MX51_MXC_INT_GPC2	74
+#define MX51_MXC_INT_SRC	75
+#define MX51_MXC_INT_NM		76
+#define MX51_MXC_INT_PMU	77
+#define MX51_MXC_INT_CTI_IRQ	78
+#define MX51_MXC_INT_CTI1_TG0	79
+#define MX51_MXC_INT_CTI1_TG1	80
+#define MX51_MXC_INT_MCG_ERR	81
+#define MX51_MXC_INT_MCG_TMR	82
+#define MX51_MXC_INT_MCG_FUNC	83
+#define MX51_MXC_INT_GPU2_IRQ	84
+#define MX51_MXC_INT_GPU2_BUSY	85
+#define MX51_MXC_INT_RESV86	86
+#define MX51_MXC_INT_FEC	87
+#define MX51_MXC_INT_OWIRE	88
+#define MX51_MXC_INT_CTI1_TG2	89
+#define MX51_MXC_INT_SJC	90
+#define MX51_MXC_INT_SPDIF	91
+#define MX51_MXC_INT_TVE	92
+#define MX51_MXC_INT_FIRI	93
+#define MX51_MXC_INT_PWM2	94
+#define MX51_MXC_INT_SLIM_EXP	95
+#define MX51_MXC_INT_SSI3	96
+#define MX51_MXC_INT_EMI_BOOT	97
+#define MX51_MXC_INT_CTI1_TG3	98
+#define MX51_MXC_INT_SMC_RX	99
+#define MX51_MXC_INT_VPU_IDLE	100
+#define MX51_MXC_INT_EMI_NFC	101
+#define MX51_MXC_INT_GPU_IDLE	102
+
+/* silicon revisions specific to i.MX51 */
+#define MX51_CHIP_REV_1_0	0x10
+#define MX51_CHIP_REV_1_1	0x11
+#define MX51_CHIP_REV_1_2	0x12
+#define MX51_CHIP_REV_1_3	0x13
+#define MX51_CHIP_REV_2_0	0x20
+#define MX51_CHIP_REV_2_1	0x21
+#define MX51_CHIP_REV_2_2	0x22
+#define MX51_CHIP_REV_2_3	0x23
+#define MX51_CHIP_REV_3_0	0x30
+#define MX51_CHIP_REV_3_1	0x31
+#define MX51_CHIP_REV_3_2	0x32
+
+/* Mandatory defines used globally */
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+extern unsigned int system_rev;
+
+static inline unsigned int mx51_revision(void)
+{
+	return system_rev;
+}
+#endif
+
+#endif	/*  __ASM_ARCH_MXC_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 5199053..a790bf2 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -30,6 +30,7 @@
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
+#define MXC_CPU_MX51		51
 #define MXC_CPU_MXC91231	91231
 
 #ifndef __ASSEMBLY__
@@ -108,6 +109,18 @@
 # define cpu_is_mx35()		(0)
 #endif
 
+#ifdef CONFIG_ARCH_MX5
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX51
+# endif
+# define cpu_is_mx51()		(mxc_cpu_type == MXC_CPU_MX51)
+#else
+# define cpu_is_mx51()		(0)
+#endif
+
 #ifdef CONFIG_ARCH_MXC91231
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
@@ -121,9 +134,10 @@
 #endif
 
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
-#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
-#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
-#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
+/* These are deprecated, use mx[23][157]_setup_weimcs instead. */
+#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
+#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4))
+#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))
 #endif
 
 #define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
index 81484d1..5182b98 100644
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -184,60 +184,22 @@
 #define MXC91231_CS4_BASE_ADDR		0xB4000000
 #define MXC91231_CS5_BASE_ADDR		0xB6000000
 
-/* Is given address belongs to the specified memory region? */
-#define ADDRESS_IN_REGION(addr, start, size) \
-	(((addr) >= (start)) && ((addr) < (start)+(size)))
-
-/* Is given address belongs to the specified named `module'? */
-#define MXC91231_IS_MODULE(addr, module) \
-	ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \
-	                        MXC91231_ ## module ## _SIZE)
 /*
  * This macro defines the physical to virtual address mapping for all the
  * peripheral modules. It is used by passing in the physical address as x
  * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
+ * it returns 0.
  */
 
-#define MXC91231_IO_ADDRESS(x) \
-	(void __iomem *) \
-	(MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \
-	 0xDEADBEEF)
-
-
-/*
- * define the address mapping macros: in physical address order
- */
-#define MXC91231_L2CC_IO_ADDRESS(x)  \
-	(((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT)
-
-#define MXC91231_AIPS1_IO_ADDRESS(x)  \
-	(((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT)
-
-#define MXC91231_SPBA0_IO_ADDRESS(x)  \
-	(((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT)
-
-#define MXC91231_SPBA1_IO_ADDRESS(x)  \
-	(((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT)
-
-#define MXC91231_AIPS2_IO_ADDRESS(x)  \
-	(((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT)
-
-#define MXC91231_ROMP_IO_ADDRESS(x)  \
-	(((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT)
-
-#define MXC91231_AVIC_IO_ADDRESS(x)  \
-	(((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT)
-
-#define MXC91231_X_MEMC_IO_ADDRESS(x)  \
-	(((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT)
+#define MXC91231_IO_ADDRESS(x) (					\
+	IMX_IO_ADDRESS(x, MXC91231_L2CC) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_X_MEMC) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_ROMP) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_AVIC) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_AIPS1) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_SPBA0) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_SPBA1) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_AIPS2))
 
 /*
  * Interrupt numbers
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index 8f79623..4b9b836 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -22,6 +22,10 @@
 #define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
 #define MXC_EHCI_TTL_ENABLED		(1 << 6)
 
+#define MXC_EHCI_INTERNAL_PHY		(1 << 7)
+#define MXC_EHCI_IPPUE_DOWN		(1 << 8)
+#define MXC_EHCI_IPPUE_UP		(1 << 9)
+
 struct mxc_usbh_platform_data {
 	int (*init)(struct platform_device *pdev);
 	int (*exit)(struct platform_device *pdev);
diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h
new file mode 100644
index 0000000..c34ded5
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ssi.h
@@ -0,0 +1,18 @@
+#ifndef __MACH_SSI_H
+#define __MACH_SSI_H
+
+struct snd_ac97;
+
+extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
+extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
+
+struct imx_ssi_platform_data {
+	unsigned int flags;
+#define IMX_SSI_DMA            (1 << 0)
+#define IMX_SSI_USE_AC97       (1 << 1)
+	void (*ac97_reset) (struct snd_ac97 *ac97);
+	void (*ac97_warm_reset)(struct snd_ac97 *ac97);
+};
+
+#endif /* __MACH_SSI_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 527a6c2..024416e 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -28,6 +28,8 @@
 #define CLOCK_TICK_RATE		16625000
 #elif defined CONFIG_ARCH_MX25
 #define CLOCK_TICK_RATE		16000000
+#elif defined CONFIG_ARCH_MX5
+#define CLOCK_TICK_RATE		8000000
 #elif defined CONFIG_ARCH_MXC91231
 #define CLOCK_TICK_RATE		13000000
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index d49384c..52e476a 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -1,8 +1,6 @@
 /*
  *  arch/arm/plat-mxc/include/mach/uncompress.h
  *
- *
- *
  *  Copyright (C) 1999 ARM Limited
  *  Copyright (C) Shane Nay (shane@minirl.com)
  *
@@ -25,7 +23,6 @@
 
 #define __MXC_BOOT_UNCOMPRESS
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static unsigned long uart_base;
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
deleted file mode 100644
index a37163c..0000000
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- *  arch/arm/mach-mxc/generic.c
- *
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/map.h>
-#include <mach/iomux.h>
-
-void mxc_gpio_mode(int gpio_mode)
-{
-	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
-	unsigned int tmp;
-
-	/* Pullup enable */
-	tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port));
-	if (gpio_mode & GPIO_PUEN)
-		tmp |= (1 << pin);
-	else
-		tmp &= ~(1 << pin);
-	__raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port));
-
-	/* Data direction */
-	tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port));
-	if (gpio_mode & GPIO_OUT)
-		tmp |= 1 << pin;
-	else
-		tmp &= ~(1 << pin);
-	__raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port));
-
-	/* Primary / alternate function */
-	tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port));
-	if (gpio_mode & GPIO_AF)
-		tmp |= (1 << pin);
-	else
-		tmp &= ~(1 << pin);
-	__raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port));
-
-	/* use as gpio? */
-	tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port));
-	if (gpio_mode & (GPIO_PF | GPIO_AF))
-		tmp &= ~(1 << pin);
-	else
-		tmp |= (1 << pin);
-	__raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port));
-
-	if (pin < 16) {
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= (ocr << (pin * 2));
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port));
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port));
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port));
-	} else {
-		pin -= 16;
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= (ocr << (pin * 2));
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port));
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port));
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port));
-	}
-}
-EXPORT_SYMBOL(mxc_gpio_mode);
-
-int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-		const char *label)
-{
-	const int *p = pin_list;
-	int i;
-	unsigned gpio;
-	unsigned mode;
-	int ret = -EINVAL;
-
-	for (i = 0; i < count; i++) {
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-		if (gpio >= (GPIO_PORT_MAX + 1) * 32)
-			goto setup_error;
-
-		ret = gpio_request(gpio, label);
-		if (ret)
-			goto setup_error;
-
-		mxc_gpio_mode(gpio | mode);
-
-		p++;
-	}
-	return 0;
-
-setup_error:
-	mxc_gpio_release_multiple_pins(pin_list, i);
-	return ret;
-}
-EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
-
-void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
-{
-	const int *p = pin_list;
-	int i;
-
-	for (i = 0; i < count; i++) {
-		unsigned gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		gpio_free(gpio);
-		p++;
-	}
-
-}
-EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
-
diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/plat-mxc/iomux-v1.c
new file mode 100644
index 0000000..960a02c
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-v1.c
@@ -0,0 +1,238 @@
+/*
+ * arch/arm/plat-mxc/iomux-v1.c
+ *
+ * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
+ * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix
+ *
+ * Common code for i.MX1, i.MX21 and i.MX27
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v1.h>
+
+static void __iomem *imx_iomuxv1_baseaddr;
+static unsigned imx_iomuxv1_numports;
+
+static inline unsigned long imx_iomuxv1_readl(unsigned offset)
+{
+	return __raw_readl(imx_iomuxv1_baseaddr + offset);
+}
+
+static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
+{
+	__raw_writel(val, imx_iomuxv1_baseaddr + offset);
+}
+
+static inline void imx_iomuxv1_rmwl(unsigned offset,
+		unsigned long mask, unsigned long value)
+{
+	unsigned long reg = imx_iomuxv1_readl(offset);
+
+	reg &= ~mask;
+	reg |= value;
+
+	imx_iomuxv1_writel(reg, offset);
+}
+
+static inline void imx_iomuxv1_set_puen(
+		unsigned int port, unsigned int pin, int on)
+{
+	unsigned long mask = 1 << pin;
+
+	imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_ddir(
+		unsigned int port, unsigned int pin, int out)
+{
+	unsigned long mask = 1 << pin;
+
+	imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_gpr(
+		unsigned int port, unsigned int pin, int af)
+{
+	unsigned long mask = 1 << pin;
+
+	imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_gius(
+		unsigned int port, unsigned int pin, int inuse)
+{
+	unsigned long mask = 1 << pin;
+
+	imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_ocr(
+		unsigned int port, unsigned int pin, unsigned int ocr)
+{
+	unsigned long shift = (pin & 0xf) << 1;
+	unsigned long mask = 3 << shift;
+	unsigned long value = ocr << shift;
+	unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port);
+
+	imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+static inline void imx_iomuxv1_set_iconfa(
+		unsigned int port, unsigned int pin, unsigned int aout)
+{
+	unsigned long shift = (pin & 0xf) << 1;
+	unsigned long mask = 3 << shift;
+	unsigned long value = aout << shift;
+	unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port);
+
+	imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+static inline void imx_iomuxv1_set_iconfb(
+		unsigned int port, unsigned int pin, unsigned int bout)
+{
+	unsigned long shift = (pin & 0xf) << 1;
+	unsigned long mask = 3 << shift;
+	unsigned long value = bout << shift;
+	unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port);
+
+	imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+int mxc_gpio_mode(int gpio_mode)
+{
+	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
+	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
+	unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3;
+	unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3;
+
+	if (port >= imx_iomuxv1_numports)
+		return -EINVAL;
+
+	/* Pullup enable */
+	imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN);
+
+	/* Data direction */
+	imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT);
+
+	/* Primary / alternate function */
+	imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF);
+
+	/* use as gpio? */
+	imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF)));
+
+	imx_iomuxv1_set_ocr(port, pin, ocr);
+
+	imx_iomuxv1_set_iconfa(port, pin, aout);
+
+	imx_iomuxv1_set_iconfb(port, pin, bout);
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_gpio_mode);
+
+static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
+{
+	size_t i;
+	int ret;
+
+	for (i = 0; i < count; ++i) {
+		ret = mxc_gpio_mode(list[i]);
+
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+		const char *label)
+{
+	size_t i;
+	int ret;
+
+	for (i = 0; i < count; ++i) {
+		unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+		ret = gpio_request(gpio, label);
+		if (ret)
+			goto err_gpio_request;
+	}
+
+	ret = imx_iomuxv1_setup_multiple(pin_list, count);
+	if (ret)
+		goto err_setup;
+
+	return 0;
+
+err_setup:
+	BUG_ON(i != count);
+
+err_gpio_request:
+	mxc_gpio_release_multiple_pins(pin_list, i);
+
+	return ret;
+}
+EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
+
+void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
+{
+	size_t i;
+
+	for (i = 0; i < count; ++i) {
+		unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+		gpio_free(gpio);
+	}
+}
+EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
+
+static int imx_iomuxv1_init(void)
+{
+#ifdef CONFIG_ARCH_MX1
+	if (cpu_is_mx1()) {
+		imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR);
+		imx_iomuxv1_numports = MX1_NUM_GPIO_PORT;
+	} else
+#endif
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21()) {
+		imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR);
+		imx_iomuxv1_numports = MX21_NUM_GPIO_PORT;
+	} else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27()) {
+		imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR);
+		imx_iomuxv1_numports = MX27_NUM_GPIO_PORT;
+	} else
+#endif
+		return -ENODEV;
+
+	return 0;
+}
+pure_initcall(imx_iomuxv1_init);
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 844567ee..c1ce51a 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -30,9 +30,15 @@
 #include <asm/mach/time.h>
 #include <mach/common.h>
 
+/*
+ * There are 2 versions of the timer hardware on Freescale MXC hardware.
+ * Version 1: MX1/MXL, MX21, MX27.
+ * Version 2: MX25, MX31, MX35, MX37, MX51
+ */
+
 /* defines common for all i.MX */
 #define MXC_TCTL		0x00
-#define MXC_TCTL_TEN		(1 << 0)
+#define MXC_TCTL_TEN		(1 << 0) /* Enable module */
 #define MXC_TPRER		0x04
 
 /* MX1, MX21, MX27 */
@@ -47,8 +53,8 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35, MX25, MXC91231 */
-#define MX3_TCTL_WAITEN		(1 << 3)
+/* MX31, MX35, MX25, MXC91231, MX5 */
+#define MX3_TCTL_WAITEN		(1 << 3) /* Wait enable mode */
 #define MX3_TCTL_CLK_IPG	(1 << 6)
 #define MX3_TCTL_FRR		(1 << 9)
 #define MX3_IR			0x0c
@@ -57,6 +63,9 @@
 #define MX3_TCN			0x24
 #define MX3_TCMP		0x10
 
+#define timer_is_v1()	(cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
+#define timer_is_v2()	(!timer_is_v1())
+
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
@@ -66,7 +75,7 @@
 {
 	unsigned int tmp;
 
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v2())
 		__raw_writel(0, timer_base + MX3_IR);
 	else {
 		tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +85,7 @@
 
 static inline void gpt_irq_enable(void)
 {
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v2())
 		__raw_writel(1<<0, timer_base + MX3_IR);
 	else {
 		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -86,11 +95,13 @@
 
 static void gpt_irq_acknowledge(void)
 {
-	if (cpu_is_mx1())
-		__raw_writel(0, timer_base + MX1_2_TSTAT);
-	if (cpu_is_mx2())
-		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v1()) {
+		if (cpu_is_mx1())
+			__raw_writel(0, timer_base + MX1_2_TSTAT);
+		else
+			__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
+				timer_base + MX1_2_TSTAT);
+	} else if (timer_is_v2())
 		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
 }
 
@@ -117,7 +128,7 @@
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v2())
 		clocksource_mxc.read = mx3_get_cycles;
 
 	clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +191,7 @@
 
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
-		if (cpu_is_mx3() || cpu_is_mx25())
+		if (timer_is_v2())
 			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
 					timer_base + MX3_TCMP);
 		else
@@ -233,7 +244,7 @@
 	struct clock_event_device *evt = &clockevent_mxc;
 	uint32_t tstat;
 
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v2())
 		tstat = __raw_readl(timer_base + MX3_TSTAT);
 	else
 		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +275,7 @@
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v2())
 		clockevent_mxc.set_next_event = mx3_set_next_event;
 
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -296,7 +307,7 @@
 	__raw_writel(0, timer_base + MXC_TCTL);
 	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
-	if (cpu_is_mx3() || cpu_is_mx25())
+	if (timer_is_v2())
 		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
 	else
 		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
new file mode 100644
index 0000000..afa6709
--- /dev/null
+++ b/arch/arm/plat-mxc/tzic.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+
+/*
+ *****************************************
+ * TZIC Registers                        *
+ *****************************************
+ */
+
+#define TZIC_INTCNTL	0x0000	/* Control register */
+#define TZIC_INTTYPE	0x0004	/* Controller Type register */
+#define TZIC_IMPID	0x0008	/* Distributor Implementer Identification */
+#define TZIC_PRIOMASK	0x000C	/* Priority Mask Reg */
+#define TZIC_SYNCCTRL	0x0010	/* Synchronizer Control register */
+#define TZIC_DSMINT	0x0014	/* DSM interrupt Holdoffregister */
+#define TZIC_INTSEC0(i)	(0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */
+#define TZIC_ENSET0(i)	(0x0100 + ((i) << 2)) /* Enable Set Reg 0 */
+#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */
+#define TZIC_SRCSET0	0x0200	/* Source Set Register 0 */
+#define TZIC_SRCCLAR0	0x0280	/* Source Clear Register 0 */
+#define TZIC_PRIORITY0	0x0400	/* Priority Register 0 */
+#define TZIC_PND0	0x0D00	/* Pending Register 0 */
+#define TZIC_HIPND0	0x0D80	/* High Priority Pending Register */
+#define TZIC_WAKEUP0(i)	(0x0E00 + ((i) << 2))	/* Wakeup Config Register */
+#define TZIC_SWINT	0x0F00	/* Software Interrupt Rigger Register */
+#define TZIC_ID0	0x0FD0	/* Indentification Register 0 */
+
+void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
+
+/**
+ * tzic_mask_irq() - Disable interrupt number "irq" in the TZIC
+ *
+ * @param  irq          interrupt source number
+ */
+static void tzic_mask_irq(unsigned int irq)
+{
+	int index, off;
+
+	index = irq >> 5;
+	off = irq & 0x1F;
+	__raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index));
+}
+
+/**
+ * tzic_unmask_irq() - Enable interrupt number "irq" in the TZIC
+ *
+ * @param  irq          interrupt source number
+ */
+static void tzic_unmask_irq(unsigned int irq)
+{
+	int index, off;
+
+	index = irq >> 5;
+	off = irq & 0x1F;
+	__raw_writel(1 << off, tzic_base + TZIC_ENSET0(index));
+}
+
+static unsigned int wakeup_intr[4];
+
+/**
+ * tzic_set_wake_irq() - Set interrupt number "irq" in the TZIC as a wake-up source.
+ *
+ * @param  irq          interrupt source number
+ * @param  enable       enable as wake-up if equal to non-zero
+ * 			disble as wake-up if equal to zero
+ *
+ * @return       This function returns 0 on success.
+ */
+static int tzic_set_wake_irq(unsigned int irq, unsigned int enable)
+{
+	unsigned int index, off;
+
+	index = irq >> 5;
+	off = irq & 0x1F;
+
+	if (index > 3)
+		return -EINVAL;
+
+	if (enable)
+		wakeup_intr[index] |= (1 << off);
+	else
+		wakeup_intr[index] &= ~(1 << off);
+
+	return 0;
+}
+
+static struct irq_chip mxc_tzic_chip = {
+	.name = "MXC_TZIC",
+	.ack = tzic_mask_irq,
+	.mask = tzic_mask_irq,
+	.unmask = tzic_unmask_irq,
+	.set_wake = tzic_set_wake_irq,
+};
+
+/*
+ * This function initializes the TZIC hardware and disables all the
+ * interrupts. It registers the interrupt enable and disable functions
+ * to the kernel for each interrupt source.
+ */
+void __init tzic_init_irq(void __iomem *irqbase)
+{
+	int i;
+
+	tzic_base = irqbase;
+	/* put the TZIC into the reset value with
+	 * all interrupts disabled
+	 */
+	i = __raw_readl(tzic_base + TZIC_INTCNTL);
+
+	__raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
+	__raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
+	__raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
+
+	for (i = 0; i < 4; i++)
+		__raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
+
+	/* disable all interrupts */
+	for (i = 0; i < 4; i++)
+		__raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
+
+	/* all IRQ no FIQ Warning :: No selection */
+
+	for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
+		set_irq_chip(i, &mxc_tzic_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
+}
+
+/**
+ * tzic_enable_wake() - enable wakeup interrupt
+ *
+ * @param is_idle		1 if called in idle loop (ENSET0 register);
+ *				0 to be used when called from low power entry
+ * @return			0 if successful; non-zero otherwise
+ */
+int tzic_enable_wake(int is_idle)
+{
+	unsigned int i, v;
+
+	__raw_writel(1, tzic_base + TZIC_DSMINT);
+	if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
+		return -EAGAIN;
+
+	for (i = 0; i < 4; i++) {
+		v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
+		__raw_writel(v, TZIC_WAKEUP0(i));
+	}
+
+	return 0;
+}
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 62f18ad..fa7cb3a 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -49,24 +49,17 @@
 static void nmdk_clkevt_mode(enum clock_event_mode mode,
 			     struct clock_event_device *dev)
 {
-	unsigned long flags;
-
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		/* enable interrupts -- and count current value? */
-		raw_local_irq_save(flags);
+		/* count current value? */
 		writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
-		raw_local_irq_restore(flags);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		BUG(); /* Not supported, yet */
 		/* FALLTHROUGH */
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
-		/* disable irq */
-		raw_local_irq_save(flags);
 		writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
-		raw_local_irq_restore(flags);
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		break;
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
deleted file mode 100644
index 9e9d028..0000000
--- a/arch/arm/plat-s3c/Kconfig
+++ /dev/null
@@ -1,215 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config PLAT_S3C
-	bool
-	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
-	default y
-	select NO_IOPORT
-	help
-	  Base platform code for any Samsung S3C device
-
-# low-level serial option nodes
-
-if PLAT_S3C
-
-config CPU_LLSERIAL_S3C2410_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
-	bool
-	help
-	  Selected if there is an S3C2410 (or register compatible) serial
-	  low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
-	bool
-	help
-	  Selected if there is an S3C2440 (or register compatible) serial
-	  low-level implementation needed
-
-# boot configurations
-
-comment "Boot options"
-
-config S3C_BOOT_WATCHDOG
-	bool "S3C Initialisation watchdog"
-	depends on S3C2410_WATCHDOG
-	help
-	  Say y to enable the watchdog during the kernel decompression
-	  stage. If the kernel fails to uncompress, then the watchdog
-	  will trigger a reset and the system should restart.
-
-config S3C_BOOT_ERROR_RESET
-	bool "S3C Reboot on decompression error"
-	help
-	  Say y here to use the watchdog to reset the system if the
-	  kernel decompressor detects an error during decompression.
-
-config S3C_BOOT_UART_FORCE_FIFO
-       bool "Force UART FIFO on during boot process"
-       default y
-       help
-         Say Y here to force the UART FIFOs on during the kernel
-	 uncompressor
-
-comment "Power management"
-
-config S3C2410_PM_DEBUG
-	bool "S3C2410 PM Suspend debug"
-	depends on PM
-	help
-	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-	  for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
-       bool "SMDK LED suspend/resume debugging"
-       depends on PM && (MACH_SMDK6410)
-       help
-         Say Y here to enable the use of the SMDK LEDs on the baseboard
-	 for debugging of the state of the suspend and resume process.
-
-	 Note, this currently only works for S3C64XX based SMDK boards.
-
-config S3C2410_PM_CHECK
-	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PM && CRC32
-	help
- 	  Enable the PM code's memory area checksum over sleep. This option
-	  will generate CRCs of all blocks of memory, and store them before
-	  going to sleep. The blocks are then checked on resume for any
-	  errors.
-
-	  Note, this can take several seconds depending on memory size
-	  and CPU speed.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config S3C2410_PM_CHECK_CHUNKSIZE
-	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
-	depends on PM && S3C2410_PM_CHECK
-	default 64
-	help
-	  Set the chunksize in Kilobytes of the CRC for checking memory
-	  corruption over suspend and resume. A smaller value will mean that
-	  the CRC data block will take more memory, but wil identify any
-	  faults with better precision.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config S3C_LOWLEVEL_UART_PORT
-	int "S3C UART to use for low-level messages"
-	default 0
-	help
-	  Choice of which UART port to use for the low-level messages,
-	  such as the `Uncompressing...` at start time. The value of
-	  this configuration should be between zero and two. The port
-	  must have been initialised by the boot-loader before use.
-
-# options for gpiolib support
-
-config S3C_GPIO_SPACE
-	int "Space between gpio banks"
-	default 0
-	help
-	  Add a number of spare GPIO entries between each bank for debugging
-	  purposes. This allows any problems where an counter overflows from
-	  one bank to another to be caught, at the expense of using a little
-	  more memory.
-
-config S3C_GPIO_TRACK
-	bool
-	help
-	  Internal configuration option to enable the s3c specific gpio
-	  chip tracking if the platform requires it.
-
-config S3C_GPIO_PULL_UPDOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_DOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_UP
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_CFG_S3C24XX
-	bool
-	help
-	  Internal configuration to enable S3C24XX style GPIO configuration
-	  functions.
-
-config S3C_GPIO_CFG_S3C64XX
-	bool
-	help
-	  Internal configuration to enable S3C64XX style GPIO configuration
-	  functions.
-
-config S5P_GPIO_CFG_S5PC1XX
-	bool
-	help
-	  Internal configuration to enable S5PC1XX style GPIO configuration
-	  functions.
-
-# DMA
-
-config S3C_DMA
-	bool
-	help
-	  Internal configuration for S3C DMA core
-
-# device definitions to compile in
-
-config S3C_DEV_HSMMC
-	bool
-	help
-	  Compile in platform device definitions for HSMMC code
-
-config S3C_DEV_HSMMC1
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 1
-
-config S3C_DEV_HSMMC2
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 2
-
-config S3C_DEV_I2C1
-	bool
-	help
-	  Compile in platform device definitions for I2C channel 1
-
-config S3C_DEV_FB
-	bool
-	help
-	  Compile in platform device definition for framebuffer
-
-config S3C_DEV_USB_HOST
-	bool
-	help
-	  Compile in platform device definition for USB host.
-
-config S3C_DEV_USB_HSOTG
-	bool
-	help
-	  Compile in platform device definition for USB high-speed OtG
-
-config S3C_DEV_NAND
-	bool
-	help
-	  Compile in platform device definition for NAND controller
-
-endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
deleted file mode 100644
index 50444da..0000000
--- a/arch/arm/plat-s3c/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-# arch/arm/plat-s3c/Makefile
-#
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for all Samsung SoCs
-
-obj-y				+=  init.o
-obj-y				+= time.o
-obj-y				+= clock.o
-obj-y				+= pwm-clock.o
-obj-y				+= gpio.o
-obj-y				+= gpio-config.o
-
-# DMA support
-
-obj-$(CONFIG_S3C_DMA)		+= dma.o
-
-# PM support
-
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= pm-gpio.o
-obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
-
-# PWM support
-
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
-
-# devices
-
-obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
-obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
-obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
-obj-y				+= dev-i2c0.o
-obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
-obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
-obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
-obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 342647e..6e93ef8f 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -14,6 +14,28 @@
 
 if PLAT_S3C24XX
 
+# low-level serial option nodes
+
+config CPU_LLSERIAL_S3C2410_ONLY
+	bool
+	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
+
+config CPU_LLSERIAL_S3C2440_ONLY
+	bool
+	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
+
+config CPU_LLSERIAL_S3C2410
+	bool
+	help
+	  Selected if there is an S3C2410 (or register compatible) serial
+	  low-level implementation needed
+
+config CPU_LLSERIAL_S3C2440
+	bool
+	help
+	  Selected if there is an S3C2440 (or register compatible) serial
+	  low-level implementation needed
+
 # code that is shared between a number of the s3c24xx implementations
 
 config S3C2410_CLOCK
@@ -27,46 +49,6 @@
 	help
 	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
 
-config CPU_S3C244X
-	bool
-	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
-	help
-	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-config S3C2440_CPUFREQ
-	bool "S3C2440/S3C2442 CPU Frequency scaling support"
-	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
-	select S3C2410_CPUFREQ_UTILS
-	default y
-	help
-	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
-config S3C2440_XTAL_12000000
-	bool
-	help
-	  Indicate that the build needs to support 12MHz system
-	  crystal.
-
-config S3C2440_XTAL_16934400
-	bool
-	help
-	  Indicate that the build needs to support 16.9344MHz system
-	  crystal.
-
-config S3C2440_PLL_12000000
-	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
-	default y if CPU_FREQ_S3C24XX_PLL
-	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
-	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
-	default y if CPU_FREQ_S3C24XX_PLL
-	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-
 config S3C24XX_PWM
 	bool "PWM device support"
 	select HAVE_PWM
@@ -74,7 +56,6 @@
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system.
 
-
 # gpio configurations
 
 config S3C24XX_GPIO_EXTRA
@@ -117,13 +98,6 @@
 	  Enable debugging output for the DMA code. This option sends info
 	  to the kernel log, at priority KERN_DEBUG.
 
-config S3C24XX_ADC
-	bool "ADC common driver support"
-	help
-	  Core support for the ADC block found in the S3C24XX SoC systems
-	  for drivers such as the touchscreen and hwmon to use to share
-	  this resource.
-
 # SPI default pin configuration code
 
 config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 5dee8c1..c2237c4 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -25,20 +25,12 @@
 
 # Architecture dependant builds
 
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
-obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
-
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
-obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
 obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index ac061a1..cf97caa 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -161,14 +161,18 @@
 
 /* external clock definitions */
 
+static struct clk_ops dclk_ops = {
+	.set_parent	= s3c24xx_dclk_setparent,
+	.set_rate	= s3c24xx_set_dclk_rate,
+	.round_rate	= s3c24xx_round_dclk_rate,
+};
+
 struct clk s3c24xx_dclk0 = {
 	.name		= "dclk0",
 	.id		= -1,
 	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
 	.enable	        = s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
+	.ops		= &dclk_ops,
 };
 
 struct clk s3c24xx_dclk1 = {
@@ -176,19 +180,21 @@
 	.id		= -1,
 	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
 	.enable		= s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
+	.ops		= &dclk_ops,
+};
+
+static struct clk_ops clkout_ops = {
+	.set_parent	= s3c24xx_clkout_setparent,
 };
 
 struct clk s3c24xx_clkout0 = {
 	.name		= "clkout0",
 	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
+	.ops		= &clkout_ops,
 };
 
 struct clk s3c24xx_clkout1 = {
 	.name		= "clkout1",
 	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
+	.ops		= &clkout_ops,
 };
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 4af9dd9..9ca64df 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -49,9 +49,7 @@
 #include <plat/s3c2400.h>
 #include <plat/s3c2410.h>
 #include <plat/s3c2412.h>
-#include "s3c244x.h"
-#include <plat/s3c2440.h>
-#include <plat/s3c2442.h>
+#include <plat/s3c244x.h>
 #include <plat/s3c2443.h>
 
 /* table of supported CPUs */
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 7f686a3..8c6de1c 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -32,6 +32,7 @@
 
 #include <plat/regs-serial.h>
 #include <plat/udc.h>
+#include <plat/mci.h>
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -112,34 +113,6 @@
 	},
 };
 
-/* yart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
 /* LCD Controller */
 
 static struct resource s3c_lcd_resource[] = {
@@ -185,9 +158,27 @@
 }
 
 /* Touchscreen */
+
+static struct resource s3c_ts_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_ADC,
+		.end   = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TC,
+		.end   = IRQ_TC,
+		.flags = IORESOURCE_IRQ,
+	},
+
+};
+
 struct platform_device s3c_device_ts = {
 	.name		  = "s3c2410-ts",
 	.id		  = -1,
+	.dev.parent	= &s3c_device_adc.dev,
+	.num_resources	  = ARRAY_SIZE(s3c_ts_resource),
+	.resource	  = s3c_ts_resource,
 };
 EXPORT_SYMBOL(s3c_device_ts);
 
@@ -379,6 +370,18 @@
 
 EXPORT_SYMBOL(s3c_device_sdi);
 
+void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
+{
+	struct s3c24xx_mci_pdata *npd;
+
+	npd = kmemdup(pdata, sizeof(struct s3c24xx_mci_pdata), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory to copy pdata", __func__);
+
+	s3c_device_sdi.dev.platform_data = npd;
+}
+
+
 /* SPI (0) */
 
 static struct resource s3c_spi0_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index f0ea794..93827b3 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -33,7 +33,7 @@
 #include <mach/dma.h>
 #include <mach/map.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/regs-dma.h>
 
 /* io map for dma */
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 6d7a961..4f0f11a 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <plat/pm.h>
diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
similarity index 94%
rename from arch/arm/plat-s3c/include/plat/audio-simtec.h
rename to arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
index 53a9365..de5e88f 100644
--- a/arch/arm/plat-s3c/include/plat/audio-simtec.h
+++ b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/audio-simtec.h
+/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
  *
  * Copyright 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index 33d421d..d623235 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -135,7 +135,7 @@
  * @locktime_m: The lock-time in uS for the MPLL.
  * @locktime_u: The lock-time in uS for the UPLL.
  * @locttime_bits: The number of bits each LOCKTIME field.
- * @need_pll: Set if this driver needs to change the PLL values to acheive
+ * @need_pll: Set if this driver needs to change the PLL values to achieve
  *	any frequency changes. This is really only need by devices like the
  *	S3C2410 where there is no or limited divider between the PLL and the
  *	ARMCLK.
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index 36aaa10..2ac2b21 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -40,4 +40,13 @@
 				     unsigned short vdd);
 };
 
+/**
+ * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
+ * @pdata: The platform data
+ *
+ * Copy the platform data supplied by @pdata so that this can be marked
+ * __initdata.
+ */
+extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
+
 #endif /* _ARCH_NCI_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
deleted file mode 100644
index 107853b..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2440
-extern  int s3c2440_init(void);
-#else
-#define s3c2440_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
deleted file mode 100644
index 451a23a..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2442
-extern  int s3c2442_init(void);
-#else
-#define s3c2442_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
similarity index 72%
rename from arch/arm/plat-s3c24xx/s3c244x.h
rename to arch/arm/plat-s3c24xx/include/plat/s3c244x.h
index 6aab5ea..307248d 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x.h
+/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -23,3 +23,15 @@
 #define s3c244x_init_uarts NULL
 #define s3c244x_map_io NULL
 #endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern  int s3c2440_init(void);
+#else
+#define s3c2440_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern  int s3c2442_init(void);
+#else
+#define s3c2442_init NULL
+#endif
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
deleted file mode 100644
index e6da87a..0000000
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#	Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-config PLAT_S3C64XX
-	bool
-	depends on ARCH_S3C64XX
-	default y
-	select CPU_V6
-	select PLAT_S3C
-	select ARM_VIC
-	select NO_IOPORT
-	select ARCH_REQUIRE_GPIOLIB
-	select S3C_GPIO_TRACK
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
-	select S3C_GPIO_CFG_S3C64XX
-	select S3C_DEV_NAND
-	select USB_ARCH_HAS_OHCI
-	help
-	  Base platform code for any Samsung S3C64XX device
-
-if PLAT_S3C64XX
-
-# Configuration options shared by all S3C64XX implementations
-
-config CPU_S3C6400_INIT
-	bool
-	help
-	  Common initialisation code for the S3C6400 that is shared
-	  by other CPUs in the series, such as the S3C6410.
-
-config CPU_S3C6400_CLOCK
-	bool
-	help
-	  Common clock support code for the S3C6400 that is shared
-	  by other CPUs in the series, such as the S3C6410.
-
-config S3C64XX_DMA
-	bool "S3C64XX DMA"
-	select S3C_DMA
-
-# platform specific device setup
-
-config S3C64XX_SETUP_I2C0
-	bool
-	default y
-	help
-	  Common setup code for i2c bus 0.
-
-	  Note, currently since i2c0 is always compiled, this setup helper
-	  is always compiled with it.
-
-config S3C64XX_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config S3C64XX_SETUP_FB_24BPP
-	bool
-	help
-	  Common setup code for S3C64XX with an 24bpp RGB display helper.
-
-config S3C64XX_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for S3C64XX SDHCI GPIO configurations
-
-endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
deleted file mode 100644
index b85b435..0000000
--- a/arch/arm/plat-s3c64xx/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-# arch/arm/plat-s3c64xx/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:= dummy.o
-obj-				:=
-
-# Core files
-
-obj-y				+= dev-uart.o
-obj-y				+= cpu.o
-obj-y				+= irq.o
-obj-y				+= irq-eint.o
-obj-y				+= clock.o
-obj-y				+= gpiolib.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
-obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
-obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
-
-# PM support
-
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_PM)		+= irq-pm.o
-
-# DMA support
-
-obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
-
-# Device setup
-
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
deleted file mode 100644
index 7a36e89..0000000
--- a/arch/arm/plat-s3c64xx/clock.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-sys.h>
-#include <plat/regs-clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-struct clk clk_h2 = {
-	.name		= "hclk2",
-	.id		= -1,
-	.rate		= 0,
-};
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.id		= -1,
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S3C64XX_OTHERS);
-	if (enable)
-		val |= S3C64XX_OTHERS_USBMASK;
-	else
-		val &= ~S3C64XX_OTHERS_USBMASK;
-
-	__raw_writel(val, S3C64XX_OTHERS);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.id		= -1,
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
-				struct clk *clk,
-				int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_h,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
-	}, {
-		.name		= "iis",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
-	}, {
-		.name		= "iis",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
-	}, {
-		.name		= "48m",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
-	}, {
-		.name		= "48m",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
-	}, {
-		.name		= "48m",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
-	}, {
-		.name		= "dma0",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
-	}, {
-		.name		= "dma1",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
-	},
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
-	}
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_h2,
-};
-
-void __init s3c64xx_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		(clkp->enable)(clkp, 0);
-	}
-
-	s3c_pwmclk_init();
-}
diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
deleted file mode 100644
index a21a88f..0000000
--- a/arch/arm/plat-s3c64xx/dev-audio.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-audio.c
- *
- * Copyright 2009 Wolfson Microelectronics
- *      Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/gpio.h>
-
-#include <plat/devs.h>
-#include <plat/audio.h>
-#include <plat/gpio-bank-d.h>
-#include <plat/gpio-bank-e.h>
-#include <plat/gpio-cfg.h>
-
-static struct resource s3c64xx_iis0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS0,
-		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis0 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
-	.resource	  = s3c64xx_iis0_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis0);
-
-static struct resource s3c64xx_iis1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS1,
-		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis1 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
-	.resource	  = s3c64xx_iis1_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis1);
-
-static struct resource s3c64xx_iisv4_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IISV4,
-		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iisv4 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
-	.resource	  = s3c64xx_iisv4_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iisv4);
-
-
-/* PCM Controller platform_devices */
-
-static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
-		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
-		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
-		break;
-	case 1:
-		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
-		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
-		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
-		break;
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct resource s3c64xx_pcm0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM0,
-		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata s3c_pcm0_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm0 = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
-	.resource	  = s3c64xx_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm0_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm0);
-
-static struct resource s3c64xx_pcm1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM1,
-		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata s3c_pcm1_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm1 = {
-	.name		  = "samsung-pcm",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
-	.resource	  = s3c64xx_pcm1_resource,
-	.dev = {
-		.platform_data = &s3c_pcm1_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm1);
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
deleted file mode 100644
index 7785604..0000000
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ /dev/null
@@ -1,446 +0,0 @@
-/* arch/arm/plat-s3c64xx/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIOlib support 
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-#include <mach/gpio.h>
-#include <mach/gpio-core.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/regs-gpio.h>
-
-/* GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	8	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * D	5	4Bit	Yes	3
- * E	5	4Bit	Yes	None
- * F	16	2Bit	Yes	4 [1]
- * G	7	4Bit	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * K	16	4Bit[2]	No	None
- * L	15	4Bit[2] No	None
- * M	6	4Bit	No	IRQ_EINT
- * N	16	2Bit	No	IRQ_EINT
- * O	16	2Bit	Yes	7
- * P	15	2Bit	Yes	8
- * Q	9	2Bit	Yes	9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-#define OFF_GPCON	(0x00)
-#define OFF_GPDAT	(0x04)
-
-#define con_4bit_shift(__off) ((__off) * 4)
-
-#if 1
-#define gpio_dbg(x...) do { } while(0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
-*/
-
-static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, base + OFF_GPCON);
-
-	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip,
-				       unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-	unsigned long dat;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + OFF_GPDAT);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + OFF_GPDAT);
-	__raw_writel(con, base + OFF_GPCON);
-	__raw_writel(dat, base + OFF_GPDAT);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-/* The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
- * store the 'base + 0x4' address so that these routines see the data
- * register at ourchip->base + 0x04.
-*/
-
-static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-
-	if (offset > 7)
-		offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
-
-	return 0;
-
-}
-
-static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip,
-				       unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-
-	if (offset > 7)
-		offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + OFF_GPDAT);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + OFF_GPDAT);
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + OFF_GPDAT);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
-	.cfg_eint	= 7,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
-	.cfg_eint	= 3,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
-{
-	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit[] = {
-	{
-		.base	= S3C64XX_GPA_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPA(0),
-			.ngpio	= S3C64XX_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S3C64XX_GPB_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPB(0),
-			.ngpio	= S3C64XX_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S3C64XX_GPC_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPC(0),
-			.ngpio	= S3C64XX_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S3C64XX_GPD_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPD(0),
-			.ngpio	= S3C64XX_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S3C64XX_GPE_BASE,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPE(0),
-			.ngpio	= S3C64XX_GPIO_E_NR,
-			.label	= "GPE",
-		},
-	}, {
-		.base	= S3C64XX_GPG_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPG(0),
-			.ngpio	= S3C64XX_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	}, {
-		.base	= S3C64XX_GPM_BASE,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPM(0),
-			.ngpio	= S3C64XX_GPIO_M_NR,
-			.label	= "GPM",
-			.to_irq = s3c64xx_gpio2int_gpm,
-		},
-	},
-};
-
-int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
-{
-	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit2[] = {
-	{
-		.base	= S3C64XX_GPH_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPH(0),
-			.ngpio	= S3C64XX_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	}, {
-		.base	= S3C64XX_GPK_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPK(0),
-			.ngpio	= S3C64XX_GPIO_K_NR,
-			.label	= "GPK",
-		},
-	}, {
-		.base	= S3C64XX_GPL_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPL(0),
-			.ngpio	= S3C64XX_GPIO_L_NR,
-			.label	= "GPL",
-			.to_irq = s3c64xx_gpio2int_gpl,
-		},
-	},
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
-	.cfg_eint	= 2,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
-	.cfg_eint	= 3,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
-{
-	return IRQ_EINT(0) + pin;
-}
-
-static struct s3c_gpio_chip gpio_2bit[] = {
-	{
-		.base	= S3C64XX_GPF_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPF(0),
-			.ngpio	= S3C64XX_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S3C64XX_GPI_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPI(0),
-			.ngpio	= S3C64XX_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S3C64XX_GPJ_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPJ(0),
-			.ngpio	= S3C64XX_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S3C64XX_GPN_BASE,
-		.config	= &gpio_2bit_cfg_eint10,
-		.chip	= {
-			.base	= S3C64XX_GPN(0),
-			.ngpio	= S3C64XX_GPIO_N_NR,
-			.label	= "GPN",
-			.to_irq = s3c64xx_gpio2int_gpn,
-		},
-	}, {
-		.base	= S3C64XX_GPO_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPO(0),
-			.ngpio	= S3C64XX_GPIO_O_NR,
-			.label	= "GPO",
-		},
-	}, {
-		.base	= S3C64XX_GPP_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPP(0),
-			.ngpio	= S3C64XX_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	}, {
-		.base	= S3C64XX_GPQ_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPQ(0),
-			.ngpio	= S3C64XX_GPIO_Q_NR,
-			.label	= "GPQ",
-		},
-	},
-};
-
-static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
-	chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
-	chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
-{
-	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
-}
-
-static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
-				       int nr_chips,
-				       void (*fn)(struct s3c_gpio_chip *))
-{
-	for (; nr_chips > 0; nr_chips--, chips++) {
-		if (fn)
-			(fn)(chips);
-		s3c_gpiolib_add(chips);
-	}
-}
-
-static __init int s3c64xx_gpiolib_init(void)
-{
-	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
-			    s3c64xx_gpiolib_add_4bit);
-
-	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
-			    s3c64xx_gpiolib_add_4bit2);
-
-	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
-			    s3c64xx_gpiolib_add_2bit);
-
-	return 0;
-}
-
-core_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
deleted file mode 100644
index 8f76a1e..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
- *
- * Copyright 2009 Openmoko, Inc.
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-struct s3c64xx_dma_buff;
-
-/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
- * @next: Pointer to next buffer in queue or ring.
- * @pw: Client provided identifier
- * @lli: Pointer to hardware descriptor this buffer is associated with.
- * @lli_dma: Hardare address of the descriptor.
- */
-struct s3c64xx_dma_buff {
-	struct s3c64xx_dma_buff *next;
-
-	void			*pw;
-	struct pl080s_lli	*lli;
-	dma_addr_t		 lli_dma;
-};
-
-struct s3c64xx_dmac;
-
-struct s3c2410_dma_chan {
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 bit;	      /* bit for enable/disable/etc */
-	unsigned char		 hw_width;
-	unsigned char		 peripheral;
-
-	unsigned int		 flags;
-	enum s3c2410_dmasrc	 source;
-
-
-	dma_addr_t		dev_addr;
-
-	struct s3c2410_dma_client *client;
-	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
-
-	void __iomem		*regs;
-
-	/* cdriver callbacks */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* buffer list and information */
-	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
-	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
-	struct s3c64xx_dma_buff	*end;		/* end of queue */
-
-	/* note, when channel is running in circular mode, curr is the
-	 * first buffer enqueued, end is the last and curr is where the
-	 * last buffer-done event is set-at. The buffers are not freed
-	 * and the last buffer hardware descriptor points back to the
-	 * first.
-	 */
-};
-
-#include <plat/dma-core.h>
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
deleted file mode 100644
index 8dc5b6d..0000000
--- a/arch/arm/plat-s3c64xx/irq.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-timer.h>
-#include <plat/cpu.h>
-
-/* Timer interrupt handling */
-
-static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
-{
-	generic_handle_irq(sub_irq);
-}
-
-static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER0);
-}
-
-static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER1);
-}
-
-static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER2);
-}
-
-static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER3);
-}
-
-static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER4);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-
-static void s3c_irq_timer_mask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg &= ~(1 << (irq - IRQ_TIMER0));
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_unmask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg |= 1 << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_ack(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;
-	reg |= (1 << 5) << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static struct irq_chip s3c_irq_timer = {
-	.name		= "s3c-timer",
-	.mask		= s3c_irq_timer_mask,
-	.unmask		= s3c_irq_timer_unmask,
-	.ack		= s3c_irq_timer_ack,
-};
-
-struct uart_irq {
-	void __iomem	*regs;
-	unsigned int	 base_irq;
-	unsigned int	 parent_irq;
-};
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct uart_irq uart_irqs[] = {
-	[0] = {
-		.regs		= S3C_VA_UART0,
-		.base_irq	= IRQ_S3CUART_BASE0,
-		.parent_irq	= IRQ_UART0,
-	},
-	[1] = {
-		.regs		= S3C_VA_UART1,
-		.base_irq	= IRQ_S3CUART_BASE1,
-		.parent_irq	= IRQ_UART1,
-	},
-	[2] = {
-		.regs		= S3C_VA_UART2,
-		.base_irq	= IRQ_S3CUART_BASE2,
-		.parent_irq	= IRQ_UART2,
-	},
-	[3] = {
-		.regs		= S3C_VA_UART3,
-		.base_irq	= IRQ_S3CUART_BASE3,
-		.parent_irq	= IRQ_UART3,
-	},
-};
-
-static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
-{
-	struct uart_irq *uirq = get_irq_chip_data(irq);
-	return uirq->regs;
-}
-
-static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
-{
-	return irq & 3;
-}
-
-/* UART interrupt registers, not worth adding to seperate include header */
-
-static void s3c_irq_uart_mask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_maskack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_uart_unmask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg &= ~(1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_ack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
-{
-	struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
-	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
-	int base = uirq->base_irq;
-
-	if (pend & (1 << 0))
-		generic_handle_irq(base);
-	if (pend & (1 << 1))
-		generic_handle_irq(base + 1);
-	if (pend & (1 << 2))
-		generic_handle_irq(base + 2);
-	if (pend & (1 << 3))
-		generic_handle_irq(base + 3);
-}
-
-static struct irq_chip s3c_irq_uart = {
-	.name		= "s3c-uart",
-	.mask		= s3c_irq_uart_mask,
-	.unmask		= s3c_irq_uart_unmask,
-	.mask_ack	= s3c_irq_uart_maskack,
-	.ack		= s3c_irq_uart_ack,
-};
-
-static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
-{
-	void __iomem *reg_base = uirq->regs;
-	unsigned int irq;
-	int offs;
-
-	/* mask all interrupts at the start. */
-	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
-
-	for (offs = 0; offs < 3; offs++) {
-		irq = uirq->base_irq + offs;
-
-		set_irq_chip(irq, &s3c_irq_uart);
-		set_irq_chip_data(irq, uirq);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
-}
-
-void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
-{
-	int uart, irq;
-
-	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
-	/* initialise the pair of VICs */
-	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
-	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
-
-	/* add the timer sub-irqs */
-
-	set_irq_chained_handler(IRQ_TIMER0_VIC, s3c_irq_demux_timer0);
-	set_irq_chained_handler(IRQ_TIMER1_VIC, s3c_irq_demux_timer1);
-	set_irq_chained_handler(IRQ_TIMER2_VIC, s3c_irq_demux_timer2);
-	set_irq_chained_handler(IRQ_TIMER3_VIC, s3c_irq_demux_timer3);
-	set_irq_chained_handler(IRQ_TIMER4_VIC, s3c_irq_demux_timer4);
-
-	for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
-		set_irq_chip(irq, &s3c_irq_timer);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
-		s3c64xx_uart_irq(&uart_irqs[uart]);
-}
-
-
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
deleted file mode 100644
index ffd56de..0000000
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ /dev/null
@@ -1,758 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/s3c6400-clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C6400 based common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
-	.name		= "ext_xtal",
-	.id		= -1,
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-
-#define clk_fout_mpll	clk_mpll
-#define clk_fout_epll	clk_epll
-
-struct clk_sources {
-	unsigned int	nr_sources;
-	struct clk	**sources;
-};
-
-struct clksrc_clk {
-	struct clk		clk;
-	unsigned int		mask;
-	unsigned int		shift;
-
-	struct clk_sources	*sources;
-
-	unsigned int		divider_shift;
-	void __iomem		*reg_divider;
-};
-
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
-	.id		= -1,
-};
-
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
-
-static struct clk_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-		.id		= -1,
-	},
-	.shift		= S3C6400_CLKSRC_APLL_MOUT_SHIFT,
-	.mask		= S3C6400_CLKSRC_APLL_MOUT,
-	.sources	= &clk_src_apll,
-};
-
-static struct clk *clk_src_epll_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_fout_epll,
-};
-
-static struct clk_sources clk_src_epll = {
-	.sources	= clk_src_epll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-		.id		= -1,
-	},
-	.shift		= S3C6400_CLKSRC_EPLL_MOUT_SHIFT,
-	.mask		= S3C6400_CLKSRC_EPLL_MOUT,
-	.sources	= &clk_src_epll,
-};
-
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clk_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-		.id		= -1,
-	},
-	.shift		= S3C6400_CLKSRC_MPLL_MOUT_SHIFT,
-	.mask		= S3C6400_CLKSRC_MPLL_MOUT,
-	.sources	= &clk_src_mpll,
-};
-
-static unsigned int armclk_mask;
-
-static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv;
-
-	/* divisor mask starts at bit0, so no need to shift */
-	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
-
-	return rate / (clkdiv + 1);
-}
-
-static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-
-	if (parent < rate)
-		return parent;
-
-	div = (parent / rate) - 1;
-	if (div > armclk_mask)
-		div = armclk_mask;
-
-	return parent / (div + 1);
-}
-
-static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-	u32 val;
-
-	if (rate < parent / (armclk_mask + 1))
-		return -EINVAL;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-
-	val = __raw_readl(S3C_CLK_DIV0);
-	val &= ~armclk_mask;
-	val |= (div - 1);
-	__raw_writel(val, S3C_CLK_DIV0);
-
-	return 0;
-
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.parent		= &clk_mout_apll.clk,
-	.get_rate	= s3c64xx_clk_arm_get_rate,
-	.set_rate	= s3c64xx_clk_arm_set_rate,
-	.round_rate	= s3c64xx_clk_arm_round_rate,
-};
-
-static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
-		rate /= 2;
-
-	return rate;
-}
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.id		= -1,
-	.parent		= &clk_mout_mpll.clk,
-	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
-};
-
-static struct clk *clkset_spi_mmc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_27m,
-};
-
-static struct clk_sources clkset_spi_mmc = {
-	.sources	= clkset_spi_mmc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
-};
-
-static struct clk *clkset_irda_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	&clk_27m,
-};
-
-static struct clk_sources clkset_irda = {
-	.sources	= clkset_irda_list,
-	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	NULL
-};
-
-static struct clk_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_uhost_list[] = {
-	&clk_48m,
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-};
-
-static struct clk_sources clkset_uhost = {
-	.sources	= clkset_uhost_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
-};
-
-
-/* The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S3C64XX version, and also
- * have a common parent divisor so are not included here.
- */
-
-static inline struct clksrc_clk *to_clksrc(struct clk *clk)
-{
-	return container_of(clk, struct clksrc_clk, clk);
-}
-
-static unsigned long s3c64xx_getrate_clksrc(struct clk *clk)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv = __raw_readl(sclk->reg_divider);
-
-	clkdiv >>= sclk->divider_shift;
-	clkdiv &= 0xf;
-	clkdiv++;
-
-	rate /= clkdiv;
-	return rate;
-}
-
-static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	void __iomem *reg = sclk->reg_divider;
-	unsigned int div;
-	u32 val;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-	if (div > 16)
-		return -EINVAL;
-
-	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->divider_shift);
-	val |= (div - 1) << sclk->divider_shift;
-	__raw_writel(val, reg);
-
-	return 0;
-}
-
-static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	struct clk_sources *srcs = sclk->sources;
-	u32 clksrc = __raw_readl(S3C_CLK_SRC);
-	int src_nr = -1;
-	int ptr;
-
-	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
-		if (srcs->sources[ptr] == parent) {
-			src_nr = ptr;
-			break;
-		}
-
-	if (src_nr >= 0) {
-		clksrc &= ~sclk->mask;
-		clksrc |= src_nr << sclk->shift;
-
-		__raw_writel(clksrc, S3C_CLK_SRC);
-
-		clk->parent = parent;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		rate = parent_rate;
-	else {
-		div = parent_rate / rate;
-
-		if (div == 0)
-			div = 1;
-		if (div > 16)
-			div = 16;
-
-		rate = parent_rate / div;
-	}
-
-	return rate;
-}
-
-static struct clksrc_clk clk_mmc0 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_MMC0_SHIFT,
-	.mask		= S3C6400_CLKSRC_MMC0_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV1_MMC0_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc1 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 1,
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
-		.enable		= s3c64xx_sclk_ctrl,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_MMC1_SHIFT,
-	.mask		= S3C6400_CLKSRC_MMC1_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV1_MMC1_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc2 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 2,
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
-		.enable		= s3c64xx_sclk_ctrl,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_MMC2_SHIFT,
-	.mask		= S3C6400_CLKSRC_MMC2_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV1_MMC2_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_usbhost = {
-	.clk	= {
-		.name		= "usb-bus-host",
-		.id		= -1,
-		.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_UHOST_SHIFT,
-	.mask		= S3C6400_CLKSRC_UHOST_MASK,
-	.sources	= &clkset_uhost,
-	.divider_shift	= S3C6400_CLKDIV1_UHOST_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_uart_uclk1 = {
-	.clk	= {
-		.name		= "uclk1",
-		.id		= -1,
-		.ctrlbit        = S3C_CLKCON_SCLK_UART,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_UART_SHIFT,
-	.mask		= S3C6400_CLKSRC_UART_MASK,
-	.sources	= &clkset_uart,
-	.divider_shift	= S3C6400_CLKDIV2_UART_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-/* Where does UCLK0 come from? */
-
-static struct clksrc_clk clk_spi0 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_SPI0,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_SPI0_SHIFT,
-	.mask		= S3C6400_CLKSRC_SPI0_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV2_SPI0_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_spi1 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.id		= 1,
-		.ctrlbit        = S3C_CLKCON_SCLK_SPI1,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_SPI1_SHIFT,
-	.mask		= S3C6400_CLKSRC_SPI1_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV2_SPI1_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clk clk_iis_cd0 = {
-	.name		= "iis_cdclk0",
-	.id		= -1,
-};
-
-static struct clk clk_iis_cd1 = {
-	.name		= "iis_cdclk1",
-	.id		= -1,
-};
-
-static struct clk clk_pcm_cd = {
-	.name		= "pcm_cdclk",
-	.id		= -1,
-};
-
-static struct clk *clkset_audio0_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd0,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clk_sources clkset_audio0 = {
-	.sources	= clkset_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clksrc_clk clk_audio0 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_AUDIO0,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_AUDIO0_SHIFT,
-	.mask		= S3C6400_CLKSRC_AUDIO0_MASK,
-	.sources	= &clkset_audio0,
-	.divider_shift	= S3C6400_CLKDIV2_AUDIO0_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clk *clkset_audio1_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd1,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clk_sources clkset_audio1 = {
-	.sources	= clkset_audio1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
-};
-
-static struct clksrc_clk clk_audio1 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 1,
-		.ctrlbit        = S3C_CLKCON_SCLK_AUDIO1,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_AUDIO1_SHIFT,
-	.mask		= S3C6400_CLKSRC_AUDIO1_MASK,
-	.sources	= &clkset_audio1,
-	.divider_shift	= S3C6400_CLKDIV2_AUDIO1_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_irda = {
-	.clk	= {
-		.name		= "irda-bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_IRDA_SHIFT,
-	.mask		= S3C6400_CLKSRC_IRDA_MASK,
-	.sources	= &clkset_irda,
-	.divider_shift	= S3C6400_CLKDIV2_IRDA_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clk *clkset_camif_list[] = {
-	&clk_h2,
-};
-
-static struct clk_sources clkset_camif = {
-	.sources	= clkset_camif_list,
-	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
-};
-
-static struct clksrc_clk clk_camif = {
-	.clk	= {
-		.name		= "camera",
-		.id		= -1,
-		.ctrlbit        = S3C_CLKCON_SCLK_CAM,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= 0,
-	.mask		= 0,
-	.sources	= &clkset_camif,
-	.divider_shift	= S3C6400_CLKDIV0_CAM_SHIFT,
-	.reg_divider	= S3C_CLK_DIV0,
-};
-
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-	&clk_mmc0,
-	&clk_mmc1,
-	&clk_mmc2,
-	&clk_usbhost,
-	&clk_uart_uclk1,
-	&clk_spi0,
-	&clk_spi1,
-	&clk_audio0,
-	&clk_audio1,
-	&clk_irda,
-	&clk_camif,
-};
-
-static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
-{
-	struct clk_sources *srcs = clk->sources;
-	u32 clksrc = __raw_readl(S3C_CLK_SRC);
-
-	clksrc &= clk->mask;
-	clksrc >>= clk->shift;
-
-	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
-		printk(KERN_ERR "%s: bad source %d\n",
-		       clk->clk.name, clksrc);
-		return;
-	}
-
-	clk->clk.parent = srcs->sources[clksrc];
-
-	printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
-	       clk->clk.name, clk->clk.parent->name, clksrc,
-	       clk_get_rate(&clk->clk));
-}
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s3c6400_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk2;
-	unsigned long pclk;
-	unsigned long epll;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned int ptr;
-	u32 clkdiv0;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	/* For now assume the mux always selects the crystal */
-	clk_ext_xtal_mux.parent = xtal_clk;
-
-	epll = s3c6400_get_epll(xtal);
-	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
-	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-
-	fclk = mpll;
-
-	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
-	       apll, mpll, epll);
-
-	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
-	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
-
-	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
-	       hclk2, hclk, pclk);
-
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
-
-	clk_h2.rate = hclk2;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c6400_set_clksrc(init_parents[ptr]);
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_ext_xtal_mux,
-	&clk_iis_cd0,
-	&clk_iis_cd1,
-	&clk_pcm_cd,
-	&clk_mout_epll.clk,
-	&clk_mout_mpll.clk,
-	&clk_dout_mpll,
-	&clk_mmc0.clk,
-	&clk_mmc1.clk,
-	&clk_mmc2.clk,
-	&clk_usbhost.clk,
-	&clk_uart_uclk1.clk,
-	&clk_spi0.clk,
-	&clk_spi1.clk,
-	&clk_audio0.clk,
-	&clk_audio1.clk,
-	&clk_irda.clk,
-	&clk_camif.clk,
-	&clk_arm,
-};
-
-/**
- * s3c6400_register_clocks - register clocks for s3c6400 and above
- * @armclk_divlimit: Divisor mask for ARMCLK
- *
- * Register the clocks for the S3C6400 and above SoC range, such
- * as ARMCLK and the clocks which have divider chains attached.
- *
- * This call does not setup the clocks, which is left to the
- * s3c6400_setup_clocks() call which may be needed by the cpufreq
- * or resume code to re-set the clocks if the bootloader has changed
- * them.
- */
-void __init s3c6400_register_clocks(unsigned armclk_divlimit)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	armclk_mask = armclk_divlimit;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-}
diff --git a/arch/arm/plat-s3c64xx/s3c6400-init.c b/arch/arm/plat-s3c64xx/s3c6400-init.c
deleted file mode 100644
index 6c28f39..0000000
--- a/arch/arm/plat-s3c64xx/s3c6400-init.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/s3c6400-init.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - CPU initialisation (common with other S3C64XX chips)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* uart registration process */
-
-void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
-}
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
new file mode 100644
index 0000000..d400a6a
--- /dev/null
+++ b/arch/arm/plat-s5p/Kconfig
@@ -0,0 +1,25 @@
+# arch/arm/plat-s5p/Kconfig
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+config PLAT_S5P
+	bool
+	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210)
+	default y
+	select ARM_VIC
+	select NO_IOPORT
+	select ARCH_REQUIRE_GPIOLIB
+	select S3C_GPIO_TRACK
+	select SAMSUNG_GPIOLIB_4BIT
+	select S3C_GPIO_CFG_S3C64XX
+	select S3C_GPIO_PULL_UPDOWN
+	select S3C_GPIO_CFG_S3C24XX
+	select PLAT_SAMSUNG
+	select SAMSUNG_CLKSRC
+	select SAMSUNG_IRQ_VIC_TIMER
+	select SAMSUNG_IRQ_UART
+	help
+	  Base platform code for Samsung's S5P series SoC.
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
new file mode 100644
index 0000000..a7c54b3
--- /dev/null
+++ b/arch/arm/plat-s5p/Makefile
@@ -0,0 +1,19 @@
+# arch/arm/plat-s5p/Makefile
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:= dummy.o
+obj-				:=
+
+# Core files
+
+obj-y				+= dev-uart.o
+obj-y				+= cpu.o
+obj-y				+= clock.o
+obj-y				+= irq.o
+obj-y				+= setup-i2c0.o
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
new file mode 100644
index 0000000..aa96e33
--- /dev/null
+++ b/arch/arm/plat-s5p/clock.c
@@ -0,0 +1,149 @@
+/* linux/arch/arm/plat-s5p/clock.c
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+#include <asm/div64.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p-clock.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * clk_ext_xtal_mux.
+*/
+struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+static struct clk s5p_clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+/* 48MHz USB Phy clock output */
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+};
+
+/* APLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+/* MPLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_mpll = {
+	.name		= "fout_mpll",
+	.id		= -1,
+};
+
+/* EPLL clock output */
+struct clk clk_fout_epll = {
+	.name		= "fout_epll",
+	.id		= -1,
+	.ctrlbit	= (1 << 31),
+};
+
+/* ARM clock */
+struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.rate		= 0,
+	.ctrlbit	= 0,
+};
+
+/* Possible clock sources for APLL Mux */
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+struct clksrc_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+/* Possible clock sources for MPLL Mux */
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+/* Possible clock sources for EPLL Mux */
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+struct clksrc_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+struct clk clk_vpll = {
+	.name		= "vpll",
+	.id		= -1,
+};
+
+int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+	con = enable ? (con | ctrlbit) : (con & ~ctrlbit);
+	__raw_writel(con, reg);
+	return 0;
+}
+
+static struct clk *s5p_clks[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_48m,
+	&s5p_clk_27m,
+	&clk_fout_apll,
+	&clk_fout_mpll,
+	&clk_fout_epll,
+	&clk_arm,
+	&clk_vpll,
+};
+
+void __init s5p_register_clocks(unsigned long xtal_freq)
+{
+	int ret;
+
+	clk_ext_xtal_mux.rate = xtal_freq;
+
+	ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register s5p clocks\n");
+}
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
new file mode 100644
index 0000000..f92e5de
--- /dev/null
+++ b/arch/arm/plat-s5p/cpu.c
@@ -0,0 +1,113 @@
+/* linux/arch/arm/plat-s5p/cpu.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <mach/map.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/regs-clock.h>
+#include <plat/cpu.h>
+#include <plat/s5p6440.h>
+#include <plat/s5p6442.h>
+#include <plat/s5pv210.h>
+
+/* table of supported CPUs */
+
+static const char name_s5p6440[] = "S5P6440";
+static const char name_s5p6442[] = "S5P6442";
+static const char name_s5pv210[] = "S5PV210/S5PC110";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= 0x56440100,
+		.idmask		= 0xffffff00,
+		.map_io		= s5p6440_map_io,
+		.init_clocks	= s5p6440_init_clocks,
+		.init_uarts	= s5p6440_init_uarts,
+		.init		= s5p6440_init,
+		.name		= name_s5p6440,
+	}, {
+		.idcode		= 0x36442000,
+		.idmask		= 0xffffff00,
+		.map_io		= s5p6442_map_io,
+		.init_clocks	= s5p6442_init_clocks,
+		.init_uarts	= s5p6442_init_uarts,
+		.init		= s5p6442_init,
+		.name		= name_s5p6442,
+	}, {
+		.idcode		= 0x43110000,
+		.idmask		= 0xfffff000,
+		.map_io		= s5pv210_map_io,
+		.init_clocks	= s5pv210_init_clocks,
+		.init_uarts	= s5pv210_init_uarts,
+		.init		= s5pv210_init,
+		.name		= name_s5pv210,
+	},
+};
+
+/* minimal IO mapping */
+
+static struct map_desc s5p_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5P_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S5P_PA_SYSCON),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5P_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5P_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S5P_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5P_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* read cpu identification code */
+
+void __init s5p_init_io(struct map_desc *mach_desc,
+			int size, void __iomem *cpuid_addr)
+{
+	unsigned long idcode;
+
+	/* initialize the io descriptors we need for initialization */
+	iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
+	if (mach_desc)
+		iotable_init(mach_desc, size);
+
+	idcode = __raw_readl(cpuid_addr);
+	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
new file mode 100644
index 0000000..a89331e
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -0,0 +1,139 @@
+/* linux/arch/arm/plat-s5p/dev-uart.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Base S5P UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+ /* Serial port registrations */
+
+static struct resource s5p_uart0_resource[] = {
+	[0] = {
+		.start	= S5P_PA_UART0,
+		.end	= S5P_PA_UART0 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX0,
+		.end	= IRQ_S5P_UART_RX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX0,
+		.end	= IRQ_S5P_UART_TX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR0,
+		.end	= IRQ_S5P_UART_ERR0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s5p_uart1_resource[] = {
+	[0] = {
+		.start	= S5P_PA_UART1,
+		.end	= S5P_PA_UART1 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX1,
+		.end	= IRQ_S5P_UART_RX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX1,
+		.end	= IRQ_S5P_UART_TX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR1,
+		.end	= IRQ_S5P_UART_ERR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5p_uart2_resource[] = {
+	[0] = {
+		.start	= S5P_PA_UART2,
+		.end	= S5P_PA_UART2 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX2,
+		.end	= IRQ_S5P_UART_RX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX2,
+		.end	= IRQ_S5P_UART_TX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR2,
+		.end	= IRQ_S5P_UART_ERR2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5p_uart3_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+	[0] = {
+		.start	= S5P_PA_UART3,
+		.end	= S5P_PA_UART3 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX3,
+		.end	= IRQ_S5P_UART_RX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX3,
+		.end	= IRQ_S5P_UART_TX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR3,
+		.end	= IRQ_S5P_UART_ERR3,
+		.flags	= IORESOURCE_IRQ,
+	},
+#endif
+};
+
+struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s5p_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart0_resource),
+	},
+	[1] = {
+		.resources	= s5p_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart1_resource),
+	},
+	[2] = {
+		.resources	= s5p_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart2_resource),
+	},
+	[3] = {
+		.resources	= s5p_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart3_resource),
+	},
+};
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
new file mode 100644
index 0000000..42e757f
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -0,0 +1,90 @@
+/* linux/arch/arm/plat-s5p/include/plat/irqs.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P Common IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_IRQS_H
+#define __ASM_PLAT_S5P_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S5P_IRQ_OFFSET		(32)
+
+#define S5P_IRQ(x)		((x) + S5P_IRQ_OFFSET)
+
+#define S5P_VIC0_BASE		S5P_IRQ(0)
+#define S5P_VIC1_BASE		S5P_IRQ(32)
+#define S5P_VIC2_BASE		S5P_IRQ(64)
+#define S5P_VIC3_BASE		S5P_IRQ(96)
+
+#define VIC_BASE(x)		(S5P_VIC0_BASE + ((x)*32))
+
+#define IRQ_VIC0_BASE		S5P_VIC0_BASE
+#define IRQ_VIC1_BASE		S5P_VIC1_BASE
+#define IRQ_VIC2_BASE		S5P_VIC2_BASE
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S5P_UART_BASE0	(16)
+#define IRQ_S5P_UART_BASE1	(20)
+#define IRQ_S5P_UART_BASE2	(24)
+#define IRQ_S5P_UART_BASE3	(28)
+
+#define UART_IRQ_RXD		(0)
+#define UART_IRQ_ERR		(1)
+#define UART_IRQ_TXD		(2)
+
+#define IRQ_S5P_UART_RX0	(IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX0	(IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR0	(IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX1	(IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX1	(IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR1	(IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX2	(IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX2	(IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR2	(IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX3	(IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX3	(IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR3	(IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
+
+/* S3C compatibilty defines */
+#define IRQ_S3CUART_RX0		IRQ_S5P_UART_RX0
+#define IRQ_S3CUART_RX1		IRQ_S5P_UART_RX1
+#define IRQ_S3CUART_RX2		IRQ_S5P_UART_RX2
+#define IRQ_S3CUART_RX3		IRQ_S5P_UART_RX3
+
+/* VIC based IRQs */
+
+#define S5P_IRQ_VIC0(x)		(S5P_VIC0_BASE + (x))
+#define S5P_IRQ_VIC1(x)		(S5P_VIC1_BASE + (x))
+#define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
+#define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
+
+#define S5P_TIMER_IRQ(x)	S5P_IRQ(11 + (x))
+
+#define IRQ_TIMER0		S5P_TIMER_IRQ(0)
+#define IRQ_TIMER1		S5P_TIMER_IRQ(1)
+#define IRQ_TIMER2		S5P_TIMER_IRQ(2)
+#define IRQ_TIMER3		S5P_TIMER_IRQ(3)
+#define IRQ_TIMER4		S5P_TIMER_IRQ(4)
+
+#endif /* __ASM_PLAT_S5P_IRQS_H */
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
new file mode 100644
index 0000000..1482852
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -0,0 +1,34 @@
+/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S5P_H
+#define __ASM_PLAT_MAP_S5P_H __FILE__
+
+#define S5P_VA_CHIPID		S3C_ADDR(0x00700000)
+#define S5P_VA_GPIO		S3C_ADDR(0x00500000)
+#define S5P_VA_SYSTIMER		S3C_ADDR(0x01200000)
+#define S5P_VA_SROMC		S3C_ADDR(0x01100000)
+
+#define S5P_VA_UART0		(S3C_VA_UART + 0x0)
+#define S5P_VA_UART1		(S3C_VA_UART + 0x400)
+#define S5P_VA_UART2		(S3C_VA_UART + 0x800)
+#define S5P_VA_UART3		(S3C_VA_UART + 0xC00)
+
+#define S3C_UART_OFFSET		(0x400)
+
+#define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0			VA_VIC(0)
+#define VA_VIC1			VA_VIC(1)
+#define VA_VIC2			VA_VIC(2)
+#define VA_VIC3			VA_VIC(3)
+
+#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
new file mode 100644
index 0000000..d48325b
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -0,0 +1,83 @@
+/* arch/arm/plat-s5p/include/plat/pll.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P PLL code
+ *
+ * Based on arch/arm/plat-s3c64xx/include/plat/pll.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define PLL45XX_MDIV_MASK	(0x3FF)
+#define PLL45XX_PDIV_MASK	(0x3F)
+#define PLL45XX_SDIV_MASK	(0x7)
+#define PLL45XX_MDIV_SHIFT	(16)
+#define PLL45XX_PDIV_SHIFT	(8)
+#define PLL45XX_SDIV_SHIFT	(0)
+
+#include <asm/div64.h>
+
+enum pll45xx_type_t {
+	pll_4500,
+	pll_4502,
+	pll_4508
+};
+
+static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
+					    enum pll45xx_type_t pll_type)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
+
+	if (pll_type == pll_4508)
+		sdiv = sdiv - 1;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define PLL90XX_MDIV_MASK	(0xFF)
+#define PLL90XX_PDIV_MASK	(0x3F)
+#define PLL90XX_SDIV_MASK	(0x7)
+#define PLL90XX_KDIV_MASK	(0xffff)
+#define PLL90XX_MDIV_SHIFT	(16)
+#define PLL90XX_PDIV_SHIFT	(8)
+#define PLL90XX_SDIV_SHIFT	(0)
+#define PLL90XX_KDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
+					    u32 pll_con, u32 pll_conk)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
+	kdiv = pll_conk & PLL90XX_KDIV_MASK;
+
+	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h
new file mode 100644
index 0000000..56fb8b4
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h
@@ -0,0 +1,40 @@
+/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5p clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_CLOCK_H
+#define __ASM_PLAT_S5P_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_vpll clk_ext_xtal_mux
+
+extern struct clk clk_ext_xtal_mux;
+extern struct clk clk_48m;
+extern struct clk clk_fout_apll;
+extern struct clk clk_fout_mpll;
+extern struct clk clk_fout_epll;
+extern struct clk clk_arm;
+extern struct clk clk_vpll;
+
+extern struct clksrc_sources clk_src_apll;
+extern struct clksrc_sources clk_src_mpll;
+extern struct clksrc_sources clk_src_epll;
+
+extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable);
+extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
+
+#endif /* __ASM_PLAT_S5P_CLOCK_H */
diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h
new file mode 100644
index 0000000..a4cd75a
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p6440.h
@@ -0,0 +1,37 @@
+/* arch/arm/plat-s5p/include/plat/s5p6440.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5p6440 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+ /* Common init code for S5P6440 related SoCs */
+
+extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5p6440_register_clocks(void);
+extern void s5p6440_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6440
+
+extern  int s5p6440_init(void);
+extern void s5p6440_init_irq(void);
+extern void s5p6440_map_io(void);
+extern void s5p6440_init_clocks(int xtal);
+
+#define s5p6440_init_uarts s5p6440_common_init_uarts
+
+#else
+#define s5p6440_init_clocks NULL
+#define s5p6440_init_uarts NULL
+#define s5p6440_map_io NULL
+#define s5p6440_init NULL
+#endif
+
+/* S5P6440 timer */
+
+extern struct sys_timer s5p6440_timer;
diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h
new file mode 100644
index 0000000..7b88013
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p6442.h
@@ -0,0 +1,33 @@
+/* arch/arm/plat-s5p/include/plat/s5p6442.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5p6442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5P6442 related SoCs */
+
+extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5p6442_register_clocks(void);
+extern void s5p6442_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6442
+
+extern  int s5p6442_init(void);
+extern void s5p6442_init_irq(void);
+extern void s5p6442_map_io(void);
+extern void s5p6442_init_clocks(int xtal);
+
+#define s5p6442_init_uarts s5p6442_common_init_uarts
+
+#else
+#define s5p6442_init_clocks NULL
+#define s5p6442_init_uarts NULL
+#define s5p6442_map_io NULL
+#define s5p6442_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-s5p/include/plat/s5pv210.h
new file mode 100644
index 0000000..6c93a0c
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5pv210.h
@@ -0,0 +1,33 @@
+/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5pv210 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PV210 related SoCs */
+
+extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pv210_register_clocks(void);
+extern void s5pv210_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PV210
+
+extern  int s5pv210_init(void);
+extern void s5pv210_init_irq(void);
+extern void s5pv210_map_io(void);
+extern void s5pv210_init_clocks(int xtal);
+
+#define s5pv210_init_uarts s5pv210_common_init_uarts
+
+#else
+#define s5pv210_init_clocks NULL
+#define s5pv210_init_uarts NULL
+#define s5pv210_map_io NULL
+#define s5pv210_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
new file mode 100644
index 0000000..25e1eb6
--- /dev/null
+++ b/arch/arm/plat-s5p/irq.c
@@ -0,0 +1,72 @@
+/* arch/arm/plat-s5p/irq.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <linux/serial_core.h>
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/regs-serial.h>
+#include <plat/cpu.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
+
+/*
+ * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct s3c_uart_irq uart_irqs[] = {
+	[0] = {
+		.regs		= S5P_VA_UART0,
+		.base_irq	= IRQ_S5P_UART_BASE0,
+		.parent_irq	= IRQ_UART0,
+	},
+	[1] = {
+		.regs		= S5P_VA_UART1,
+		.base_irq	= IRQ_S5P_UART_BASE1,
+		.parent_irq	= IRQ_UART1,
+	},
+	[2] = {
+		.regs		= S5P_VA_UART2,
+		.base_irq	= IRQ_S5P_UART_BASE2,
+		.parent_irq	= IRQ_UART2,
+	},
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+	[3] = {
+		.regs		= S5P_VA_UART3,
+		.base_irq	= IRQ_S5P_UART_BASE3,
+		.parent_irq	= IRQ_UART3,
+	},
+#endif
+};
+
+void __init s5p_init_irq(u32 *vic, u32 num_vic)
+{
+	int irq;
+
+	/* initialize the VICs */
+	for (irq = 0; irq < num_vic; irq++)
+		vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
+
+	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+	s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+	s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+	s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
+
+	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
+}
diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/plat-s5p/setup-i2c0.c
new file mode 100644
index 0000000..67a66e0
--- /dev/null
+++ b/arch/arm/plat-s5p/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s5p/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	/* Will be populated later */
+}
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index b7b9e91..c7ccdf22 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -11,6 +11,9 @@
 	select ARM_VIC
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
+	select SAMSUNG_CLKSRC
+	select SAMSUNG_IRQ_UART
+	select SAMSUNG_IRQ_VIC_TIMER
 	select S3C_GPIO_TRACK
 	select S3C_GPIO_PULL_UPDOWN
 	select S3C_GPIO_CFG_S3C24XX
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
index 26c21d8..387f231 100644
--- a/arch/arm/plat-s5pc1xx/clock.c
+++ b/arch/arm/plat-s5pc1xx/clock.c
@@ -64,25 +64,13 @@
 	.rate		= 54000000,
 };
 
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 0;
-}
-
-static int clk_dummy_enable(struct clk *clk, int enable)
-{
-	return 0;
-}
-
 struct clk clk_hd0 = {
 	.name		= "hclkd0",
 	.id		= -1,
 	.rate		= 0,
 	.parent		= NULL,
 	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-	.enable		= clk_dummy_enable,
+	.ops		= &clk_ops_def_setrate,
 };
 
 struct clk clk_pd0 = {
@@ -91,8 +79,7 @@
 	.rate		= 0,
 	.parent		= NULL,
 	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-	.enable		= clk_dummy_enable,
+	.ops		= &clk_ops_def_setrate,
 };
 
 static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
@@ -686,6 +673,8 @@
 static struct clk *clks[] __initdata = {
 	&clk_ext,
 	&clk_epll,
+	&clk_pd0,
+	&clk_hd0,
 	&clk_27m,
 	&clk_48m,
 	&clk_54m,
@@ -700,16 +689,8 @@
 
 	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
 
-	clkp = s5pc100_init_clocks;
-	size = ARRAY_SIZE(s5pc100_init_clocks);
-
-	for (ptr = 0; ptr < size; ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
+	s3c_register_clocks(s5pc100_init_clocks,
+			    ARRAY_SIZE(s5pc100_init_clocks));
 
 	clkp = s5pc100_init_clocks_disable;
 	size = ARRAY_SIZE(s5pc100_init_clocks_disable);
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
index f749bc5..586c95c 100644
--- a/arch/arm/plat-s5pc1xx/dev-uart.c
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -143,32 +143,3 @@
 		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart3_resource),
 	},
 };
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
index bba675d..a4f67e8 100644
--- a/arch/arm/plat-s5pc1xx/gpio-config.c
+++ b/arch/arm/plat-s5pc1xx/gpio-config.c
@@ -16,7 +16,7 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
 #include <plat/gpio-cfg-s5pc1xx.h>
 
 s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c
index facb410..1ffc57a 100644
--- a/arch/arm/plat-s5pc1xx/gpiolib.c
+++ b/arch/arm/plat-s5pc1xx/gpiolib.c
@@ -17,8 +17,8 @@
 #include <linux/gpio.h>
 
 #include <mach/map.h>
-#include <mach/gpio-core.h>
 
+#include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 #include <plat/regs-gpio.h>
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
index ef87363..409c8043 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -88,11 +88,11 @@
 #define IRQ_MDMA		S5PC1XX_IRQ_VIC0(18)
 #define IRQ_PDMA0		S5PC1XX_IRQ_VIC0(19)
 #define IRQ_PDMA1		S5PC1XX_IRQ_VIC0(20)
-#define IRQ_TIMER0		S5PC1XX_IRQ_VIC0(21)
-#define IRQ_TIMER1		S5PC1XX_IRQ_VIC0(22)
-#define IRQ_TIMER2		S5PC1XX_IRQ_VIC0(23)
-#define IRQ_TIMER3		S5PC1XX_IRQ_VIC0(24)
-#define IRQ_TIMER4		S5PC1XX_IRQ_VIC0(25)
+#define IRQ_TIMER0_VIC		S5PC1XX_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC		S5PC1XX_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC		S5PC1XX_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC		S5PC1XX_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC		S5PC1XX_IRQ_VIC0(25)
 #define IRQ_SYSTIMER		S5PC1XX_IRQ_VIC0(26)
 #define IRQ_WDT			S5PC1XX_IRQ_VIC0(27)
 #define IRQ_RTC_ALARM		S5PC1XX_IRQ_VIC0(28)
@@ -171,8 +171,15 @@
 #define IRQ_SDMIRQ		S5PC1XX_IRQ_VIC2(30)
 #define IRQ_SDMFIQ		S5PC1XX_IRQ_VIC2(31)
 
+#define IRQ_TIMER(x)		(IRQ_SDMFIQ + 1 + (x))
+#define IRQ_TIMER0		IRQ_TIMER(0)
+#define IRQ_TIMER1		IRQ_TIMER(1)
+#define IRQ_TIMER2		IRQ_TIMER(2)
+#define IRQ_TIMER3		IRQ_TIMER(3)
+#define IRQ_TIMER4		IRQ_TIMER(4)
+
 /* External interrupt */
-#define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 1)
+#define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 6)
 
 #define S3C_EINT(x)		(S3C_IRQ_EINT_BASE + (x - 16))
 #define IRQ_EINT(x)		(x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
index c5cc86e..24dec4e 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -61,73 +61,10 @@
 #define S5PC100_EPLL_MASK		0xffffffff
 #define S5PC100_EPLLVAL(_m, _p, _s)	((_m) << 16 | ((_p) << 8) | ((_s)))
 
-/* CLKSRC0 */
-#define S5PC100_CLKSRC0_APLL_MASK		(0x1<<0)
-#define S5PC100_CLKSRC0_APLL_SHIFT		(0)
-#define S5PC100_CLKSRC0_MPLL_MASK		(0x1<<4)
-#define S5PC100_CLKSRC0_MPLL_SHIFT		(4)
-#define S5PC100_CLKSRC0_EPLL_MASK		(0x1<<8)
-#define S5PC100_CLKSRC0_EPLL_SHIFT		(8)
-#define S5PC100_CLKSRC0_HPLL_MASK		(0x1<<12)
-#define S5PC100_CLKSRC0_HPLL_SHIFT		(12)
-#define S5PC100_CLKSRC0_AMMUX_MASK		(0x1<<16)
-#define S5PC100_CLKSRC0_AMMUX_SHIFT		(16)
-#define S5PC100_CLKSRC0_HREF_MASK		(0x1<<20)
-#define S5PC100_CLKSRC0_HREF_SHIFT		(20)
-#define S5PC100_CLKSRC0_ONENAND_MASK	(0x1<<24)
-#define S5PC100_CLKSRC0_ONENAND_SHIFT	(24)
-
-
-/* CLKSRC1 */
-#define S5PC100_CLKSRC1_UART_MASK		(0x1<<0)
-#define S5PC100_CLKSRC1_UART_SHIFT		(0)
-#define S5PC100_CLKSRC1_SPI0_MASK		(0x3<<4)
-#define S5PC100_CLKSRC1_SPI0_SHIFT		(4)
-#define S5PC100_CLKSRC1_SPI1_MASK		(0x3<<8)
-#define S5PC100_CLKSRC1_SPI1_SHIFT		(8)
-#define S5PC100_CLKSRC1_SPI2_MASK		(0x3<<12)
-#define S5PC100_CLKSRC1_SPI2_SHIFT		(12)
-#define S5PC100_CLKSRC1_IRDA_MASK		(0x3<<16)
-#define S5PC100_CLKSRC1_IRDA_SHIFT		(16)
-#define S5PC100_CLKSRC1_UHOST_MASK		(0x3<<20)
-#define S5PC100_CLKSRC1_UHOST_SHIFT		(20)
-#define S5PC100_CLKSRC1_CLK48M_MASK		(0x1<<24)
+/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */
+#define S5PC100_CLKSRC1_CLK48M_MASK	(0x1<<24)
 #define S5PC100_CLKSRC1_CLK48M_SHIFT	(24)
 
-/* CLKSRC2 */
-#define S5PC100_CLKSRC2_MMC0_MASK		(0x3<<0)
-#define S5PC100_CLKSRC2_MMC0_SHIFT		(0)
-#define S5PC100_CLKSRC2_MMC1_MASK		(0x3<<4)
-#define S5PC100_CLKSRC2_MMC1_SHIFT		(4)
-#define S5PC100_CLKSRC2_MMC2_MASK		(0x3<<8)
-#define S5PC100_CLKSRC2_MMC2_SHIFT		(8)
-#define S5PC100_CLKSRC2_LCD_MASK		(0x3<<12)
-#define S5PC100_CLKSRC2_LCD_SHIFT		(12)
-#define S5PC100_CLKSRC2_FIMC0_MASK		(0x3<<16)
-#define S5PC100_CLKSRC2_FIMC0_SHIFT		(16)
-#define S5PC100_CLKSRC2_FIMC1_MASK		(0x3<<20)
-#define S5PC100_CLKSRC2_FIMC1_SHIFT		(20)
-#define S5PC100_CLKSRC2_FIMC2_MASK		(0x3<<24)
-#define S5PC100_CLKSRC2_FIMC2_SHIFT		(24)
-#define S5PC100_CLKSRC2_MIXER_MASK		(0x3<<28)
-#define S5PC100_CLKSRC2_MIXER_SHIFT		(28)
-
-/* CLKSRC3 */
-#define S5PC100_CLKSRC3_PWI_MASK		(0x3<<0)
-#define S5PC100_CLKSRC3_PWI_SHIFT		(0)
-#define S5PC100_CLKSRC3_HCLKD2_MASK		(0x1<<4)
-#define S5PC100_CLKSRC3_HCLKD2_SHIFT	(4)
-#define S5PC100_CLKSRC3_I2SD2_MASK		(0x3<<8)
-#define S5PC100_CLKSRC3_I2SD2_SHIFT		(8)
-#define S5PC100_CLKSRC3_AUDIO0_MASK		(0x7<<12)
-#define S5PC100_CLKSRC3_AUDIO0_SHIFT	(12)
-#define S5PC100_CLKSRC3_AUDIO1_MASK		(0x7<<16)
-#define S5PC100_CLKSRC3_AUDIO1_SHIFT	(16)
-#define S5PC100_CLKSRC3_AUDIO2_MASK		(0x7<<20)
-#define S5PC100_CLKSRC3_AUDIO2_SHIFT	(20)
-#define S5PC100_CLKSRC3_SPDIF_MASK		(0x3<<24)
-#define S5PC100_CLKSRC3_SPDIF_SHIFT		(24)
-
 /* CLKDIV0 */
 #define S5PC100_CLKDIV0_APLL_MASK		(0x1<<0)
 #define S5PC100_CLKDIV0_APLL_SHIFT		(0)
@@ -140,7 +77,7 @@
 #define S5PC100_CLKDIV0_SECSS_MASK		(0x7<<16)
 #define S5PC100_CLKDIV0_SECSS_SHIFT		(16)
 
-/* CLKDIV1 */
+/* CLKDIV1 (OneNAND clock only used in one place, removed) */
 #define S5PC100_CLKDIV1_APLL2_MASK		(0x7<<0)
 #define S5PC100_CLKDIV1_APLL2_SHIFT		(0)
 #define S5PC100_CLKDIV1_MPLL_MASK		(0x3<<4)
@@ -151,56 +88,12 @@
 #define S5PC100_CLKDIV1_D1_SHIFT		(12)
 #define S5PC100_CLKDIV1_PCLKD1_MASK		(0x7<<16)
 #define S5PC100_CLKDIV1_PCLKD1_SHIFT	(16)
-#define S5PC100_CLKDIV1_ONENAND_MASK	(0x3<<20)
-#define S5PC100_CLKDIV1_ONENAND_SHIFT	(20)
 #define S5PC100_CLKDIV1_CAM_MASK		(0x1F<<24)
 #define S5PC100_CLKDIV1_CAM_SHIFT		(24)
 
-/* CLKDIV2 */
-#define S5PC100_CLKDIV2_UART_MASK		(0x7<<0)
-#define S5PC100_CLKDIV2_UART_SHIFT		(0)
-#define S5PC100_CLKDIV2_SPI0_MASK		(0xf<<4)
-#define S5PC100_CLKDIV2_SPI0_SHIFT		(4)
-#define S5PC100_CLKDIV2_SPI1_MASK		(0xf<<8)
-#define S5PC100_CLKDIV2_SPI1_SHIFT		(8)
-#define S5PC100_CLKDIV2_SPI2_MASK		(0xf<<12)
-#define S5PC100_CLKDIV2_SPI2_SHIFT		(12)
-#define S5PC100_CLKDIV2_IRDA_MASK		(0xf<<16)
-#define S5PC100_CLKDIV2_IRDA_SHIFT		(16)
-#define S5PC100_CLKDIV2_UHOST_MASK		(0xf<<20)
-#define S5PC100_CLKDIV2_UHOST_SHIFT		(20)
-
-/* CLKDIV3 */
-#define S5PC100_CLKDIV3_MMC0_MASK		(0xf<<0)
-#define S5PC100_CLKDIV3_MMC0_SHIFT		(0)
-#define S5PC100_CLKDIV3_MMC1_MASK		(0xf<<4)
-#define S5PC100_CLKDIV3_MMC1_SHIFT		(4)
-#define S5PC100_CLKDIV3_MMC2_MASK		(0xf<<8)
-#define S5PC100_CLKDIV3_MMC2_SHIFT		(8)
-#define S5PC100_CLKDIV3_LCD_MASK		(0xf<<12)
-#define S5PC100_CLKDIV3_LCD_SHIFT		(12)
-#define S5PC100_CLKDIV3_FIMC0_MASK		(0xf<<16)
-#define S5PC100_CLKDIV3_FIMC0_SHIFT		(16)
-#define S5PC100_CLKDIV3_FIMC1_MASK		(0xf<<20)
-#define S5PC100_CLKDIV3_FIMC1_SHIFT		(20)
-#define S5PC100_CLKDIV3_FIMC2_MASK		(0xf<<24)
-#define S5PC100_CLKDIV3_FIMC2_SHIFT		(24)
-#define S5PC100_CLKDIV3_HDMI_MASK		(0xf<<28)
-#define S5PC100_CLKDIV3_HDMI_SHIFT		(28)
-
-/* CLKDIV4 */
-#define S5PC100_CLKDIV4_PWI_MASK		(0x7<<0)
-#define S5PC100_CLKDIV4_PWI_SHIFT		(0)
-#define S5PC100_CLKDIV4_HCLKD2_MASK		(0x7<<4)
-#define S5PC100_CLKDIV4_HCLKD2_SHIFT	(4)
-#define S5PC100_CLKDIV4_I2SD2_MASK		(0xf<<8)
-#define S5PC100_CLKDIV4_I2SD2_SHIFT		(8)
-#define S5PC100_CLKDIV4_AUDIO0_MASK		(0xf<<12)
-#define S5PC100_CLKDIV4_AUDIO0_SHIFT	(12)
-#define S5PC100_CLKDIV4_AUDIO1_MASK		(0xf<<16)
-#define S5PC100_CLKDIV4_AUDIO1_SHIFT	(16)
-#define S5PC100_CLKDIV4_AUDIO2_MASK		(0xf<<20)
-#define S5PC100_CLKDIV4_AUDIO2_SHIFT	(20)
+/* CLKDIV2 => removed in clksrc update */
+/* CLKDIV3 => removed in clksrc update, or not needed */
+/* CLKDIV4 => removed in clksrc update, or not needed */
 
 /* HCLKD0/PCLKD0 Clock Gate 0 Registers */
 #define S5PC100_CLKGATE_D00_INTC		(1<<0)
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
index e44fd04..bfc5248 100644
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -20,87 +20,14 @@
 #include <asm/hardware/vic.h>
 
 #include <mach/map.h>
-#include <plat/regs-timer.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
 #include <plat/cpu.h>
 
-/* Timer interrupt handling */
-
-static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
-{
-	generic_handle_irq(sub_irq);
-}
-
-static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER0);
-}
-
-static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER1);
-}
-
-static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER2);
-}
-
-static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER3);
-}
-
-static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER4);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-
-static void s3c_irq_timer_mask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg &= ~(1 << (irq - IRQ_TIMER0));
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_unmask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg |= 1 << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_ack(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg |= (1 << 5) << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static struct irq_chip s3c_irq_timer = {
-	.name		= "s3c-timer",
-	.mask		= s3c_irq_timer_mask,
-	.unmask		= s3c_irq_timer_unmask,
-	.ack		= s3c_irq_timer_ack,
-};
-
-struct uart_irq {
-	void __iomem	*regs;
-	unsigned int	 base_irq;
-	unsigned int	 parent_irq;
-};
-
 /* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
  * are consecutive when looking up the interrupt in the demux routines.
  */
-static struct uart_irq uart_irqs[] = {
+static struct s3c_uart_irq uart_irqs[] = {
 	[0] = {
 		.regs		= (void *)S3C_VA_UART0,
 		.base_irq	= IRQ_S3CUART_BASE0,
@@ -123,113 +50,9 @@
 	},
 };
 
-static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
-{
-	struct uart_irq *uirq = get_irq_chip_data(irq);
-	return uirq->regs;
-}
-
-static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
-{
-	return irq & 3;
-}
-
-/* UART interrupt registers, not worth adding to seperate include header */
-#define S3C64XX_UINTP	0x30
-#define S3C64XX_UINTSP	0x34
-#define S3C64XX_UINTM	0x38
-
-static void s3c_irq_uart_mask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_maskack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_uart_unmask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg &= ~(1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_ack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
-{
-	struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
-	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
-	int base = uirq->base_irq;
-
-	if (pend & (1 << 0))
-		generic_handle_irq(base);
-	if (pend & (1 << 1))
-		generic_handle_irq(base + 1);
-	if (pend & (1 << 2))
-		generic_handle_irq(base + 2);
-	if (pend & (1 << 3))
-		generic_handle_irq(base + 3);
-}
-
-static struct irq_chip s3c_irq_uart = {
-	.name		= "s3c-uart",
-	.mask		= s3c_irq_uart_mask,
-	.unmask		= s3c_irq_uart_unmask,
-	.mask_ack	= s3c_irq_uart_maskack,
-	.ack		= s3c_irq_uart_ack,
-};
-
-static void __init s5pc1xx_uart_irq(struct uart_irq *uirq)
-{
-	void __iomem *reg_base = uirq->regs;
-	unsigned int irq;
-	int offs;
-
-	/* mask all interrupts at the start. */
-	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
-
-	for (offs = 0; offs < 3; offs++) {
-		irq = uirq->base_irq + offs;
-
-		set_irq_chip(irq, &s3c_irq_uart);
-		set_irq_chip_data(irq, uirq);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
-}
-
 void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
 {
 	int i;
-	int uart, irq;
 
 	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
 
@@ -240,20 +63,13 @@
 
 	/* add the timer sub-irqs */
 
-	set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0);
-	set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1);
-	set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2);
-	set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3);
-	set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4);
+	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+	s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+	s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+	s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
 
-	for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
-		set_irq_chip(irq, &s3c_irq_timer);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
-		s5pc1xx_uart_irq(&uart_irqs[uart]);
+	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
 }
 
 
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
index b436d44..2bf6c57 100644
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -29,6 +29,7 @@
 
 #include <plat/regs-clock.h>
 #include <plat/clock.h>
+#include <plat/clock-clksrc.h>
 #include <plat/cpu.h>
 #include <plat/pll.h>
 #include <plat/devs.h>
@@ -51,23 +52,6 @@
 #define clk_fout_mpll	clk_mpll
 #define clk_vclk_54m	clk_54m
 
-struct clk_sources {
-	unsigned int	nr_sources;
-	struct clk	**sources;
-};
-
-struct clksrc_clk {
-	struct clk		clk;
-	unsigned int		mask;
-	unsigned int		shift;
-
-	struct clk_sources	*sources;
-
-	unsigned int		divider_shift;
-	void __iomem		*reg_divider;
-	void __iomem		*reg_source;
-};
-
 /* APLL */
 static struct clk clk_fout_apll = {
 	.name		= "fout_apll",
@@ -80,7 +64,7 @@
 	[1] = &clk_fout_apll,
 };
 
-static struct clk_sources clk_src_apll = {
+static struct clksrc_sources clk_src_apll = {
 	.sources	= clk_src_apll_list,
 	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
 };
@@ -90,10 +74,8 @@
 		.name		= "mout_apll",
 		.id		= -1,
 	},
-	.shift		= S5PC100_CLKSRC0_APLL_SHIFT,
-	.mask		= S5PC100_CLKSRC0_APLL_MASK,
 	.sources	= &clk_src_apll,
-	.reg_source	= S5PC100_CLKSRC0,
+	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, },
 };
 
 static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
@@ -111,7 +93,9 @@
 	.name		= "dout_apll",
 	.id		= -1,
 	.parent		= &clk_mout_apll.clk,
-	.get_rate	= s5pc100_clk_dout_apll_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_apll_get_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
@@ -165,9 +149,11 @@
 	.name		= "armclk",
 	.id		= -1,
 	.parent		= &clk_dout_apll,
-	.get_rate	= s5pc100_clk_arm_get_rate,
-	.set_rate	= s5pc100_clk_arm_set_rate,
-	.round_rate	= s5pc100_clk_arm_round_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_arm_get_rate,
+		.set_rate	= s5pc100_clk_arm_set_rate,
+		.round_rate	= s5pc100_clk_arm_round_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
@@ -185,7 +171,9 @@
 	.name		= "dout_d0_bus",
 	.id		= -1,
 	.parent		= &clk_arm,
-	.get_rate	= s5pc100_clk_dout_d0_bus_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_d0_bus_get_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
@@ -203,7 +191,9 @@
 	.name		= "dout_pclkd0",
 	.id		= -1,
 	.parent		= &clk_dout_d0_bus,
-	.get_rate	= s5pc100_clk_dout_pclkd0_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_pclkd0_get_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
@@ -221,7 +211,9 @@
 	.name		= "dout_apll2",
 	.id		= -1,
 	.parent		= &clk_mout_apll.clk,
-	.get_rate	= s5pc100_clk_dout_apll2_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_apll2_get_rate,
+	},
 };
 
 /* MPLL */
@@ -230,7 +222,7 @@
 	[1] = &clk_fout_mpll,
 };
 
-static struct clk_sources clk_src_mpll = {
+static struct clksrc_sources clk_src_mpll = {
 	.sources	= clk_src_mpll_list,
 	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
 };
@@ -240,10 +232,8 @@
 		.name		= "mout_mpll",
 		.id		= -1,
 	},
-	.shift		= S5PC100_CLKSRC0_MPLL_SHIFT,
-	.mask		= S5PC100_CLKSRC0_MPLL_MASK,
 	.sources	= &clk_src_mpll,
-	.reg_source	= S5PC100_CLKSRC0,
+	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, },
 };
 
 static struct clk *clkset_am_list[] = {
@@ -251,7 +241,7 @@
 	[1] = &clk_dout_apll2,
 };
 
-static struct clk_sources clk_src_am = {
+static struct clksrc_sources clk_src_am = {
 	.sources	= clkset_am_list,
 	.nr_sources	= ARRAY_SIZE(clkset_am_list),
 };
@@ -261,10 +251,8 @@
 		.name		= "mout_am",
 		.id		= -1,
 	},
-	.shift		= S5PC100_CLKSRC0_AMMUX_SHIFT,
-	.mask		= S5PC100_CLKSRC0_AMMUX_MASK,
 	.sources	= &clk_src_am,
-	.reg_source	= S5PC100_CLKSRC0,
+	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, },
 };
 
 static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
@@ -284,7 +272,9 @@
 	.name		= "dout_d1_bus",
 	.id		= -1,
 	.parent		= &clk_mout_am.clk,
-	.get_rate	= s5pc100_clk_dout_d1_bus_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_d1_bus_get_rate,
+	},
 };
 
 static struct clk *clkset_onenand_list[] = {
@@ -292,7 +282,7 @@
 	[1] = &clk_dout_d1_bus,
 };
 
-static struct clk_sources clk_src_onenand = {
+static struct clksrc_sources clk_src_onenand = {
 	.sources	= clkset_onenand_list,
 	.nr_sources	= ARRAY_SIZE(clkset_onenand_list),
 };
@@ -302,10 +292,8 @@
 		.name		= "mout_onenand",
 		.id		= -1,
 	},
-	.shift		= S5PC100_CLKSRC0_ONENAND_SHIFT,
-	.mask		= S5PC100_CLKSRC0_ONENAND_MASK,
 	.sources	= &clk_src_onenand,
-	.reg_source	= S5PC100_CLKSRC0,
+	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, },
 };
 
 static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
@@ -325,7 +313,9 @@
 	.name		= "dout_pclkd1",
 	.id		= -1,
 	.parent		= &clk_dout_d1_bus,
-	.get_rate	= s5pc100_clk_dout_pclkd1_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_pclkd1_get_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
@@ -345,7 +335,9 @@
 	.name		= "dout_mpll2",
 	.id		= -1,
 	.parent		= &clk_mout_am.clk,
-	.get_rate	= s5pc100_clk_dout_mpll2_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_mpll2_get_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
@@ -365,7 +357,9 @@
 	.name		= "dout_cam",
 	.id		= -1,
 	.parent		= &clk_dout_mpll2,
-	.get_rate	= s5pc100_clk_dout_cam_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_cam_get_rate,
+	},
 };
 
 static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
@@ -385,7 +379,9 @@
 	.name		= "dout_mpll",
 	.id		= -1,
 	.parent		= &clk_mout_am.clk,
-	.get_rate	= s5pc100_clk_dout_mpll_get_rate,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s5pc100_clk_dout_mpll_get_rate,
+	},
 };
 
 /* EPLL */
@@ -399,7 +395,7 @@
 	[1] = &clk_fout_epll,
 };
 
-static struct clk_sources clk_src_epll = {
+static struct clksrc_sources clk_src_epll = {
 	.sources	= clk_src_epll_list,
 	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
 };
@@ -409,10 +405,8 @@
 		.name		= "mout_epll",
 		.id		= -1,
 	},
-	.shift		= S5PC100_CLKSRC0_EPLL_SHIFT,
-	.mask		= S5PC100_CLKSRC0_EPLL_MASK,
-	.sources	= &clk_src_epll,
-	.reg_source	= S5PC100_CLKSRC0,
+	.sources = &clk_src_epll,
+	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, },
 };
 
 /* HPLL */
@@ -426,7 +420,7 @@
 	[1] = &clk_fout_hpll,
 };
 
-static struct clk_sources clk_src_hpll = {
+static struct clksrc_sources clk_src_hpll = {
 	.sources	= clk_src_hpll_list,
 	.nr_sources	= ARRAY_SIZE(clk_src_hpll_list),
 };
@@ -436,10 +430,8 @@
 		.name		= "mout_hpll",
 		.id		= -1,
 	},
-	.shift		= S5PC100_CLKSRC0_HPLL_SHIFT,
-	.mask		= S5PC100_CLKSRC0_HPLL_MASK,
-	.sources	= &clk_src_hpll,
-	.reg_source	= S5PC100_CLKSRC0,
+	.sources = &clk_src_hpll,
+	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, },
 };
 
 /* Peripherals */
@@ -454,190 +446,6 @@
  * have a common parent divisor so are not included here.
  */
 
-static inline struct clksrc_clk *to_clksrc(struct clk *clk)
-{
-	return container_of(clk, struct clksrc_clk, clk);
-}
-
-static unsigned long s5pc100_getrate_clksrc(struct clk *clk)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv = __raw_readl(sclk->reg_divider);
-
-	clkdiv >>= sclk->divider_shift;
-	clkdiv &= 0xf;
-	clkdiv++;
-
-	rate /= clkdiv;
-	return rate;
-}
-
-static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	void __iomem *reg = sclk->reg_divider;
-	unsigned int div;
-	u32 val;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-	if (div > 16)
-		return -EINVAL;
-
-	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->divider_shift);
-	val |= (div - 1) << sclk->divider_shift;
-	__raw_writel(val, reg);
-
-	return 0;
-}
-
-static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	struct clk_sources *srcs = sclk->sources;
-	u32 clksrc = __raw_readl(sclk->reg_source);
-	int src_nr = -1;
-	int ptr;
-
-	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
-		if (srcs->sources[ptr] == parent) {
-			src_nr = ptr;
-			break;
-		}
-
-	if (src_nr >= 0) {
-		clksrc &= ~sclk->mask;
-		clksrc |= src_nr << sclk->shift;
-
-		__raw_writel(clksrc, sclk->reg_source);
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static unsigned long s5pc100_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		rate = parent_rate;
-	else {
-		div = rate / parent_rate;
-
-		if (div == 0)
-			div = 1;
-		if (div > 16)
-			div = 16;
-
-		rate = parent_rate / div;
-	}
-
-	return rate;
-}
-
-static struct clk *clkset_spi_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll2,
-	&clk_fin_epll,
-	&clk_mout_hpll.clk,
-};
-
-static struct clk_sources clkset_spi = {
-	.sources	= clkset_spi_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_list),
-};
-
-static struct clksrc_clk clk_spi0 = {
-	.clk	= {
-		.name		= "spi_bus",
-		.id		= 0,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_SPI0_SHIFT,
-	.mask		= S5PC100_CLKSRC1_SPI0_MASK,
-	.sources	= &clkset_spi,
-	.divider_shift	= S5PC100_CLKDIV2_SPI0_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
-};
-
-static struct clksrc_clk clk_spi1 = {
-	.clk	= {
-		.name		= "spi_bus",
-		.id		= 1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_SPI1_SHIFT,
-	.mask		= S5PC100_CLKSRC1_SPI1_MASK,
-	.sources	= &clkset_spi,
-	.divider_shift	= S5PC100_CLKDIV2_SPI1_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
-};
-
-static struct clksrc_clk clk_spi2 = {
-	.clk	= {
-		.name		= "spi_bus",
-		.id		= 2,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_SPI2_SHIFT,
-	.mask		= S5PC100_CLKSRC1_SPI2_MASK,
-	.sources	= &clkset_spi,
-	.divider_shift	= S5PC100_CLKDIV2_SPI2_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-};
-
-static struct clk_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clksrc_clk clk_uart_uclk1 = {
-	.clk	= {
-		.name		= "uclk1",
-		.id		= -1,
-		.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_UART_SHIFT,
-	.mask		= S5PC100_CLKSRC1_UART_MASK,
-	.sources	= &clkset_uart,
-	.divider_shift	= S5PC100_CLKDIV2_UART_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
-};
-
 static struct clk clk_iis_cd0 = {
 	.name		= "iis_cdclk0",
 	.id		= -1,
@@ -672,28 +480,31 @@
 	&clk_mout_hpll.clk,
 };
 
-static struct clk_sources clkset_audio0 = {
+static struct clksrc_sources clkset_audio0 = {
 	.sources	= clkset_audio0_list,
 	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
 };
 
-static struct clksrc_clk clk_audio0 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 0,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO0,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC3_AUDIO0_SHIFT,
-	.mask		= S5PC100_CLKSRC3_AUDIO0_MASK,
-	.sources	= &clkset_audio0,
-	.divider_shift	= S5PC100_CLKDIV4_AUDIO0_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV4,
-	.reg_source	= S5PC100_CLKSRC3,
+static struct clk *clkset_spi_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll2,
+	&clk_fin_epll,
+	&clk_mout_hpll.clk,
+};
+
+static struct clksrc_sources clkset_spi = {
+	.sources	= clkset_spi_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spi_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
 };
 
 static struct clk *clkset_audio1_list[] = {
@@ -705,30 +516,11 @@
 	&clk_mout_hpll.clk,
 };
 
-static struct clk_sources clkset_audio1 = {
+static struct clksrc_sources clkset_audio1 = {
 	.sources	= clkset_audio1_list,
 	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
 };
 
-static struct clksrc_clk clk_audio1 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO1,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC3_AUDIO1_SHIFT,
-	.mask		= S5PC100_CLKSRC3_AUDIO1_MASK,
-	.sources	= &clkset_audio1,
-	.divider_shift	= S5PC100_CLKDIV4_AUDIO1_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV4,
-	.reg_source	= S5PC100_CLKSRC3,
-};
-
 static struct clk *clkset_audio2_list[] = {
 	&clk_mout_epll.clk,
 	&clk_dout_mpll,
@@ -737,52 +529,56 @@
 	&clk_mout_hpll.clk,
 };
 
-static struct clk_sources clkset_audio2 = {
+static struct clksrc_sources clkset_audio2 = {
 	.sources	= clkset_audio2_list,
 	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
 };
 
-static struct clksrc_clk clk_audio2 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 2,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO2,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
+static struct clksrc_clk clksrc_audio[] = {
+	{
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 0,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO0,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources = &clkset_audio0,
+		.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, },
+	}, {
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 1,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO1,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources = &clkset_audio1,
+		.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, },
+	}, {
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 2,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO2,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources = &clkset_audio2,
+		.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, },
 	},
-	.shift		= S5PC100_CLKSRC3_AUDIO2_SHIFT,
-	.mask		= S5PC100_CLKSRC3_AUDIO2_MASK,
-	.sources	= &clkset_audio2,
-	.divider_shift	= S5PC100_CLKDIV4_AUDIO2_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV4,
-	.reg_source	= S5PC100_CLKSRC3,
 };
 
 static struct clk *clkset_spdif_list[] = {
-	&clk_audio0.clk,
-	&clk_audio1.clk,
-	&clk_audio2.clk,
+	&clksrc_audio[0].clk,
+	&clksrc_audio[1].clk,
+	&clksrc_audio[2].clk,
 };
 
-static struct clk_sources clkset_spdif = {
+static struct clksrc_sources clkset_spdif = {
 	.sources	= clkset_spdif_list,
 	.nr_sources	= ARRAY_SIZE(clkset_spdif_list),
 };
 
-static struct clksrc_clk clk_spdif = {
-	.clk	= {
-		.name		= "spdif",
-		.id		= -1,
-	},
-	.shift		= S5PC100_CLKSRC3_SPDIF_SHIFT,
-	.mask		= S5PC100_CLKSRC3_SPDIF_MASK,
-	.sources	= &clkset_spdif,
-	.reg_source	= S5PC100_CLKSRC3,
-};
-
 static struct clk *clkset_lcd_fimc_list[] = {
 	&clk_mout_epll.clk,
 	&clk_dout_mpll,
@@ -790,87 +586,11 @@
 	&clk_vclk_54m,
 };
 
-static struct clk_sources clkset_lcd_fimc = {
+static struct clksrc_sources clkset_lcd_fimc = {
 	.sources	= clkset_lcd_fimc_list,
 	.nr_sources	= ARRAY_SIZE(clkset_lcd_fimc_list),
 };
 
-static struct clksrc_clk clk_lcd = {
-	.clk	= {
-		.name		= "lcd",
-		.id		= -1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_LCD,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_LCD_SHIFT,
-	.mask		= S5PC100_CLKSRC2_LCD_MASK,
-	.sources	= &clkset_lcd_fimc,
-	.divider_shift	= S5PC100_CLKDIV3_LCD_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_fimc0 = {
-	.clk	= {
-		.name		= "fimc",
-		.id		= 0,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC0,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_FIMC0_SHIFT,
-	.mask		= S5PC100_CLKSRC2_FIMC0_MASK,
-	.sources	= &clkset_lcd_fimc,
-	.divider_shift	= S5PC100_CLKDIV3_FIMC0_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_fimc1 = {
-	.clk	= {
-		.name		= "fimc",
-		.id		= 1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC1,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_FIMC1_SHIFT,
-	.mask		= S5PC100_CLKSRC2_FIMC1_MASK,
-	.sources	= &clkset_lcd_fimc,
-	.divider_shift	= S5PC100_CLKDIV3_FIMC1_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_fimc2 = {
-	.clk	= {
-		.name		= "fimc",
-		.id		= 2,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC2,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_FIMC2_SHIFT,
-	.mask		= S5PC100_CLKSRC2_FIMC2_MASK,
-	.sources	= &clkset_lcd_fimc,
-	.divider_shift	= S5PC100_CLKDIV3_FIMC2_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
 static struct clk *clkset_mmc_list[] = {
 	&clk_mout_epll.clk,
 	&clk_dout_mpll,
@@ -878,69 +598,11 @@
 	&clk_mout_hpll.clk ,
 };
 
-static struct clk_sources clkset_mmc = {
+static struct clksrc_sources clkset_mmc = {
 	.sources	= clkset_mmc_list,
 	.nr_sources	= ARRAY_SIZE(clkset_mmc_list),
 };
 
-static struct clksrc_clk clk_mmc0 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 0,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_MMC0_SHIFT,
-	.mask		= S5PC100_CLKSRC2_MMC0_MASK,
-	.sources	= &clkset_mmc,
-	.divider_shift	= S5PC100_CLKDIV3_MMC0_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_mmc1 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_MMC1_SHIFT,
-	.mask		= S5PC100_CLKSRC2_MMC1_MASK,
-	.sources	= &clkset_mmc,
-	.divider_shift	= S5PC100_CLKDIV3_MMC1_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_mmc2 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 2,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_MMC2_SHIFT,
-	.mask		= S5PC100_CLKSRC2_MMC2_MASK,
-	.sources	= &clkset_mmc,
-	.divider_shift	= S5PC100_CLKDIV3_MMC2_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-
 static struct clk *clkset_usbhost_list[] = {
 	&clk_mout_epll.clk,
 	&clk_dout_mpll,
@@ -948,28 +610,141 @@
 	&clk_48m,
 };
 
-static struct clk_sources clkset_usbhost = {
+static struct clksrc_sources clkset_usbhost = {
 	.sources	= clkset_usbhost_list,
 	.nr_sources	= ARRAY_SIZE(clkset_usbhost_list),
 };
 
-static struct clksrc_clk clk_usbhost = {
-	.clk	= {
-		.name		= "usbhost",
-		.id		= -1,
-		.ctrlbit        = S5PC100_CLKGATE_SCLK0_USBHOST,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_UHOST_SHIFT,
-	.mask		= S5PC100_CLKSRC1_UHOST_MASK,
-	.sources	= &clkset_usbhost,
-	.divider_shift	= S5PC100_CLKDIV2_UHOST_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
+static struct clksrc_clk clksrc_clks[] = {
+	{
+		.clk	= {
+			.name		= "spi_bus",
+			.id		= 0,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0,
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clkset_spi,
+		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "spi_bus",
+			.id		= 1,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources = &clkset_spi,
+		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "spi_bus",
+			.id		= 2,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources = &clkset_spi,
+		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources = &clkset_uart,
+		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, },
+		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, },
+	}, {
+		.clk	= {
+			.name		= "spdif",
+			.id		= -1,
+		},
+		.sources	= &clkset_spdif,
+		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "lcd",
+			.id		= -1,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_LCD,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources = &clkset_lcd_fimc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "fimc",
+			.id		= 0,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC0,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources = &clkset_lcd_fimc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "fimc",
+			.id		= 1,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC1,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources	= &clkset_lcd_fimc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "fimc",
+			.id		= 2,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC2,
+			.enable		= s5pc100_sclk1_ctrl,
+		},
+		.sources = &clkset_lcd_fimc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources = &clkset_mmc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources = &clkset_mmc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources	= &clkset_mmc,
+		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, },
+	}, {
+		.clk	= {
+			.name		= "usbhost",
+			.id		= -1,
+			.ctrlbit        = S5PC100_CLKGATE_SCLK0_USBHOST,
+			.enable		= s5pc100_sclk0_ctrl,
+		},
+		.sources = &clkset_usbhost,
+		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, },
+		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, },
+	}
 };
 
 /* Clock initialisation code */
@@ -981,45 +756,8 @@
 	&clk_mout_onenand,
 	&clk_mout_epll,
 	&clk_mout_hpll,
-	&clk_spi0,
-	&clk_spi1,
-	&clk_spi2,
-	&clk_uart_uclk1,
-	&clk_audio0,
-	&clk_audio1,
-	&clk_audio2,
-	&clk_spdif,
-	&clk_lcd,
-	&clk_fimc0,
-	&clk_fimc1,
-	&clk_fimc2,
-	&clk_mmc0,
-	&clk_mmc1,
-	&clk_mmc2,
-	&clk_usbhost,
 };
 
-static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk)
-{
-	struct clk_sources *srcs = clk->sources;
-	u32 clksrc = __raw_readl(clk->reg_source);
-
-	clksrc &= clk->mask;
-	clksrc >>= clk->shift;
-
-	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
-		printk(KERN_ERR "%s: bad source %d\n",
-		       clk->clk.name, clksrc);
-		return;
-	}
-
-	clk->clk.parent = srcs->sources[clksrc];
-
-	printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n",
-		clk->clk.name, clk->clk.parent->name, clksrc,
-		print_mhz(clk_get_rate(&clk->clk)));
-}
-
 #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
 
 void __init_or_cpufreq s5pc100_setup_clocks(void)
@@ -1083,17 +821,25 @@
 	clk_f.rate = armclk;
 
 	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s5pc100_set_clksrc(init_parents[ptr]);
+		s3c_set_clksrc(init_parents[ptr], true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++)
+		s3c_set_clksrc(clksrc_audio + ptr, true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
+		s3c_set_clksrc(clksrc_clks + ptr, true);
 }
 
 static struct clk *clks[] __initdata = {
 	&clk_ext_xtal_mux,
-	&clk_mout_apll.clk,
 	&clk_dout_apll,
 	&clk_dout_d0_bus,
 	&clk_dout_pclkd0,
 	&clk_dout_apll2,
+	&clk_mout_apll.clk,
 	&clk_mout_mpll.clk,
+	&clk_mout_epll.clk,
+	&clk_mout_hpll.clk,
 	&clk_mout_am.clk,
 	&clk_dout_d1_bus,
 	&clk_mout_onenand.clk,
@@ -1101,29 +847,12 @@
 	&clk_dout_mpll2,
 	&clk_dout_cam,
 	&clk_dout_mpll,
-	&clk_mout_epll.clk,
 	&clk_fout_epll,
 	&clk_iis_cd0,
 	&clk_iis_cd1,
 	&clk_iis_cd2,
 	&clk_pcm_cd0,
 	&clk_pcm_cd1,
-	&clk_spi0.clk,
-	&clk_spi1.clk,
-	&clk_spi2.clk,
-	&clk_uart_uclk1.clk,
-	&clk_audio0.clk,
-	&clk_audio1.clk,
-	&clk_audio2.clk,
-	&clk_spdif.clk,
-	&clk_lcd.clk,
-	&clk_fimc0.clk,
-	&clk_fimc1.clk,
-	&clk_fimc2.clk,
-	&clk_mmc0.clk,
-	&clk_mmc1.clk,
-	&clk_mmc2.clk,
-	&clk_usbhost.clk,
 	&clk_arm,
 };
 
@@ -1141,4 +870,7 @@
 			       clkp->name, ret);
 		}
 	}
+
+	s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio));
+	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
 }
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 486a0d6..d552c65f 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -7,11 +7,240 @@
 config PLAT_SAMSUNG
 	bool
 	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
+	select NO_IOPORT
 	default y
 	help
 	  Base platform code for all Samsung SoC based systems
 
 if PLAT_SAMSUNG
 
+# boot configurations
+
+comment "Boot options"
+
+config S3C_BOOT_WATCHDOG
+	bool "S3C Initialisation watchdog"
+	depends on S3C2410_WATCHDOG
+	help
+	  Say y to enable the watchdog during the kernel decompression
+	  stage. If the kernel fails to uncompress, then the watchdog
+	  will trigger a reset and the system should restart.
+
+config S3C_BOOT_ERROR_RESET
+	bool "S3C Reboot on decompression error"
+	help
+	  Say y here to use the watchdog to reset the system if the
+	  kernel decompressor detects an error during decompression.
+
+config S3C_BOOT_UART_FORCE_FIFO
+       bool "Force UART FIFO on during boot process"
+       default y
+       help
+         Say Y here to force the UART FIFOs on during the kernel
+	 uncompressor
+
+
+config S3C_LOWLEVEL_UART_PORT
+	int "S3C UART to use for low-level messages"
+	default 0
+	help
+	  Choice of which UART port to use for the low-level messages,
+	  such as the `Uncompressing...` at start time. The value of
+	  this configuration should be between zero and two. The port
+	  must have been initialised by the boot-loader before use.
+
+# clock options
+
+config SAMSUNG_CLKSRC
+	bool
+	help
+	  Select the clock code for the clksrc implementation
+	  used by newer systems such as the S3C64XX.
+
+# options for IRQ support
+
+config SAMSUNG_IRQ_VIC_TIMER
+       bool
+       help
+         Internal configuration to build the VIC timer interrupt code.
+
+config SAMSUNG_IRQ_UART
+       bool
+       help
+         Internal configuration to build the IRQ UART demux code.
+
+# options for gpio configuration support
+
+config SAMSUNG_GPIOLIB_4BIT
+	bool
+	help
+	  GPIOlib file contains the 4 bit modification functions for gpio
+	  configuration. GPIOlib shall be compiled only for S3C64XX and S5P
+	  series of processors.
+
+config S3C_GPIO_CFG_S3C24XX
+	bool
+	help
+	  Internal configuration to enable S3C24XX style GPIO configuration
+	  functions.
+
+config S3C_GPIO_CFG_S3C64XX
+	bool
+	help
+	  Internal configuration to enable S3C64XX style GPIO configuration
+	  functions.
+
+config S5P_GPIO_CFG_S5PC1XX
+	bool
+	help
+	  Internal configuration to enable S5PC1XX style GPIO configuration
+	  functions.
+
+config S3C_GPIO_PULL_UPDOWN
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_DOWN
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_UP
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config SAMSUNG_GPIO_EXTRA
+	int "Number of additional GPIO pins"
+	default 0
+	help
+	  Use additional GPIO space in addition to the GPIO's the SOC
+	  provides. This allows expanding the GPIO space for use with
+	  GPIO expanders.
+
+config S3C_GPIO_SPACE
+	int "Space between gpio banks"
+	default 0
+	help
+	  Add a number of spare GPIO entries between each bank for debugging
+	  purposes. This allows any problems where an counter overflows from
+	  one bank to another to be caught, at the expense of using a little
+	  more memory.
+
+config S3C_GPIO_TRACK
+	bool
+	help
+	  Internal configuration option to enable the s3c specific gpio
+	  chip tracking if the platform requires it.
+
+# ADC driver
+
+config S3C_ADC
+	bool "ADC common driver support"
+	help
+	  Core support for the ADC block found in the Samsung SoC systems
+	  for drivers such as the touchscreen and hwmon to use to share
+	  this resource.
+
+# device definitions to compile in
+
+config S3C_DEV_HSMMC
+	bool
+	help
+	  Compile in platform device definitions for HSMMC code
+
+config S3C_DEV_HSMMC1
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 1
+
+config S3C_DEV_HSMMC2
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 2
+
+config S3C_DEV_I2C1
+	bool
+	help
+	  Compile in platform device definitions for I2C channel 1
+
+config S3C_DEV_FB
+	bool
+	help
+	  Compile in platform device definition for framebuffer
+
+config S3C_DEV_USB_HOST
+	bool
+	help
+	  Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+	bool
+	help
+	  Compile in platform device definition for USB high-speed OtG
+
+config S3C_DEV_NAND
+	bool
+	help
+	  Compile in platform device definition for NAND controller
+
+config S3C64XX_DEV_SPI
+	bool
+	help
+	  Compile in platform device definitions for S3C64XX's type
+	  SPI controllers.
+
+# DMA
+
+config S3C_DMA
+	bool
+	help
+	  Internal configuration for S3C DMA core
+
+comment "Power management"
+
+config SAMSUNG_PM_DEBUG
+	bool "S3C2410 PM Suspend debug"
+	depends on PM
+	help
+	  Say Y here if you want verbose debugging from the PM Suspend and
+	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+	  for more information.
+
+config S3C_PM_DEBUG_LED_SMDK
+       bool "SMDK LED suspend/resume debugging"
+       depends on PM && (MACH_SMDK6410)
+       help
+         Say Y here to enable the use of the SMDK LEDs on the baseboard
+	 for debugging of the state of the suspend and resume process.
+
+	 Note, this currently only works for S3C64XX based SMDK boards.
+
+config SAMSUNG_PM_CHECK
+	bool "S3C2410 PM Suspend Memory CRC"
+	depends on PM && CRC32
+	help
+	  Enable the PM code's memory area checksum over sleep. This option
+	  will generate CRCs of all blocks of memory, and store them before
+	  going to sleep. The blocks are then checked on resume for any
+	  errors.
+
+	  Note, this can take several seconds depending on memory size
+	  and CPU speed.
+
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
+config SAMSUNG_PM_CHECK_CHUNKSIZE
+	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+	depends on PM && SAMSUNG_PM_CHECK
+	default 64
+	help
+	  Set the chunksize in Kilobytes of the CRC for checking memory
+	  corruption over suspend and resume. A smaller value will mean that
+	  the CRC data block will take more memory, but wil identify any
+	  faults with better precision.
+
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 
 endif
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 4478b9f..22c89d0 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -9,3 +9,48 @@
 obj-n				:= dummy.o
 obj-				:=
 
+# Objects we always build independent of SoC choice
+
+obj-y				+= init.o
+obj-y				+= time.o
+obj-y				+= clock.o
+obj-y				+= pwm-clock.o
+obj-y				+= gpio.o
+obj-y				+= gpio-config.o
+
+obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT)	+= gpiolib.o
+obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
+
+obj-$(CONFIG_SAMSUNG_IRQ_UART)	+= irq-uart.o
+obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
+
+# ADC
+
+obj-$(CONFIG_S3C_ADC)	+= adc.o
+
+# devices
+
+obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
+obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
+obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
+obj-y				+= dev-i2c0.o
+obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
+obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
+obj-y				+= dev-uart.o
+obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
+obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
+obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
+
+# DMA support
+
+obj-$(CONFIG_S3C_DMA)		+= dma.o
+
+# PM support
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= pm-gpio.o
+obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
+
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM)		+= pwm.o
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-samsung/adc.c
similarity index 88%
rename from arch/arm/plat-s3c24xx/adc.c
rename to arch/arm/plat-samsung/adc.c
index ce47627..0b5833b 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -1,10 +1,10 @@
-/* arch/arm/plat-s3c24xx/adc.c
+/* arch/arm/plat-samsung/adc.c
  *
  * Copyright (c) 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
  *
- * S3C24XX ADC device core
+ * Samsung ADC device core
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -37,6 +37,11 @@
  * action is required.
  */
 
+enum s3c_cpu_type {
+	TYPE_S3C24XX,
+	TYPE_S3C64XX
+};
+
 struct s3c_adc_client {
 	struct platform_device	*pdev;
 	struct list_head	 pend;
@@ -257,12 +262,13 @@
 {
 	struct adc_device *adc = pw;
 	struct s3c_adc_client *client = adc->cur;
+	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
 	unsigned long flags;
 	unsigned data0, data1;
 
 	if (!client) {
 		dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
-		return IRQ_HANDLED;
+		goto exit;
 	}
 
 	data0 = readl(adc->regs + S3C2410_ADCDAT0);
@@ -271,9 +277,17 @@
 
 	client->nr_samples--;
 
+	if (cpu == TYPE_S3C64XX) {
+		/* S3C64XX ADC resolution is 12-bit */
+		data0 &= 0xfff;
+		data1 &= 0xfff;
+	} else {
+		data0 &= 0x3ff;
+		data1 &= 0x3ff;
+	}
+
 	if (client->convert_cb)
-		(client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
-				     &client->nr_samples);
+		(client->convert_cb)(client, data0, data1, &client->nr_samples);
 
 	if (client->nr_samples > 0) {
 		/* fire another conversion for this */
@@ -289,6 +303,11 @@
 		local_irq_restore(flags);
 	}
 
+exit:
+	if (cpu == TYPE_S3C64XX) {
+		/* Clear ADC interrupt */
+		writel(0, adc->regs + S3C64XX_ADCCLRINT);
+	}
 	return IRQ_HANDLED;
 }
 
@@ -298,6 +317,7 @@
 	struct adc_device *adc;
 	struct resource *regs;
 	int ret;
+	unsigned tmp;
 
 	adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL);
 	if (adc == NULL) {
@@ -344,8 +364,12 @@
 
 	clk_enable(adc->clk);
 
-	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
-	       adc->regs + S3C2410_ADCCON);
+	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+	if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) {
+		/* Enable 12-bit ADC resolution */
+		tmp |= S3C64XX_ADCCON_RESSEL;
+	}
+	writel(tmp, adc->regs + S3C2410_ADCCON);
 
 	dev_info(dev, "attached adc driver\n");
 
@@ -388,6 +412,7 @@
 	con |= S3C2410_ADCCON_STDBM;
 	writel(con, adc->regs + S3C2410_ADCCON);
 
+	disable_irq(adc->irq);
 	clk_disable(adc->clk);
 
 	return 0;
@@ -398,6 +423,7 @@
 	struct adc_device *adc = platform_get_drvdata(pdev);
 
 	clk_enable(adc->clk);
+	enable_irq(adc->irq);
 
 	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
 	       adc->regs + S3C2410_ADCCON);
@@ -410,9 +436,22 @@
 #define s3c_adc_resume NULL
 #endif
 
+static struct platform_device_id s3c_adc_driver_ids[] = {
+	{
+		.name           = "s3c24xx-adc",
+		.driver_data    = TYPE_S3C24XX,
+	}, {
+		.name           = "s3c64xx-adc",
+		.driver_data    = TYPE_S3C64XX,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
+
 static struct platform_driver s3c_adc_driver = {
+	.id_table	= s3c_adc_driver_ids,
 	.driver		= {
-		.name	= "s3c24xx-adc",
+		.name	= "s3c-adc",
 		.owner	= THIS_MODULE,
 	},
 	.probe		= s3c_adc_probe,
diff --git a/arch/arm/plat-samsung/clock-clksrc.c b/arch/arm/plat-samsung/clock-clksrc.c
new file mode 100644
index 0000000..ae8b8507
--- /dev/null
+++ b/arch/arm/plat-samsung/clock-clksrc.c
@@ -0,0 +1,212 @@
+/* linux/arch/arm/plat-samsung/clock-clksrc.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu-freq.h>
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+	return container_of(clk, struct clksrc_clk, clk);
+}
+
+static inline u32 bit_mask(u32 shift, u32 nr_bits)
+{
+	u32 mask = 0xffffffff >> (32 - nr_bits);
+
+	return mask << shift;
+}
+
+static unsigned long s3c_getrate_clksrc(struct clk *clk)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv = __raw_readl(sclk->reg_div.reg);
+	u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
+
+	clkdiv &= mask;
+	clkdiv >>= sclk->reg_div.shift;
+	clkdiv++;
+
+	rate /= clkdiv;
+	return rate;
+}
+
+static int s3c_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	void __iomem *reg = sclk->reg_div.reg;
+	unsigned int div;
+	u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
+	u32 val;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+	if (div > (1 << sclk->reg_div.size))
+		return -EINVAL;
+
+	val = __raw_readl(reg);
+	val &= ~mask;
+	val |= (div - 1) << sclk->reg_div.shift;
+	__raw_writel(val, reg);
+
+	return 0;
+}
+
+static int s3c_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	struct clksrc_sources *srcs = sclk->sources;
+	u32 clksrc = __raw_readl(sclk->reg_src.reg);
+	u32 mask = bit_mask(sclk->reg_src.shift, sclk->reg_src.size);
+	int src_nr = -1;
+	int ptr;
+
+	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+		if (srcs->sources[ptr] == parent) {
+			src_nr = ptr;
+			break;
+		}
+
+	if (src_nr >= 0) {
+		clk->parent = parent;
+
+		clksrc &= ~mask;
+		clksrc |= src_nr << sclk->reg_src.shift;
+
+		__raw_writel(clksrc, sclk->reg_src.reg);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static unsigned long s3c_roundrate_clksrc(struct clk *clk,
+					      unsigned long rate)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int max_div = 1 << sclk->reg_div.size;
+	int div;
+
+	if (rate >= parent_rate)
+		rate = parent_rate;
+	else {
+		div = parent_rate / rate;
+		if (parent_rate % rate)
+			div++;
+
+		if (div == 0)
+			div = 1;
+		if (div > max_div)
+			div = max_div;
+
+		rate = parent_rate / div;
+	}
+
+	return rate;
+}
+
+/* Clock initialisation code */
+
+void __init_or_cpufreq s3c_set_clksrc(struct clksrc_clk *clk, bool announce)
+{
+	struct clksrc_sources *srcs = clk->sources;
+	u32 mask = bit_mask(clk->reg_src.shift, clk->reg_src.size);
+	u32 clksrc;
+
+	if (!clk->reg_src.reg) {
+		if (!clk->clk.parent)
+			printk(KERN_ERR "%s: no parent clock specified\n",
+				clk->clk.name);
+		return;
+	}
+
+	clksrc = __raw_readl(clk->reg_src.reg);
+	clksrc &= mask;
+	clksrc >>= clk->reg_src.shift;
+
+	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+		printk(KERN_ERR "%s: bad source %d\n",
+		       clk->clk.name, clksrc);
+		return;
+	}
+
+	clk->clk.parent = srcs->sources[clksrc];
+
+	if (announce)
+		printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+		       clk->clk.name, clk->clk.parent->name, clksrc,
+		       clk_get_rate(&clk->clk));
+}
+
+static struct clk_ops clksrc_ops = {
+	.set_parent	= s3c_setparent_clksrc,
+	.get_rate	= s3c_getrate_clksrc,
+	.set_rate	= s3c_setrate_clksrc,
+	.round_rate	= s3c_roundrate_clksrc,
+};
+
+static struct clk_ops clksrc_ops_nodiv = {
+	.set_parent	= s3c_setparent_clksrc,
+};
+
+static struct clk_ops clksrc_ops_nosrc = {
+	.get_rate	= s3c_getrate_clksrc,
+	.set_rate	= s3c_setrate_clksrc,
+	.round_rate	= s3c_roundrate_clksrc,
+};
+
+void __init s3c_register_clksrc(struct clksrc_clk *clksrc, int size)
+{
+	int ret;
+
+	for (; size > 0; size--, clksrc++) {
+		if (!clksrc->reg_div.reg && !clksrc->reg_src.reg)
+			printk(KERN_ERR "%s: clock %s has no registers set\n",
+			       __func__, clksrc->clk.name);
+
+		/* fill in the default functions */
+
+		if (!clksrc->clk.ops) {
+			if (!clksrc->reg_div.reg)
+				clksrc->clk.ops = &clksrc_ops_nodiv;
+			else if (!clksrc->reg_src.reg)
+				clksrc->clk.ops = &clksrc_ops_nosrc;
+			else
+				clksrc->clk.ops = &clksrc_ops;
+		}
+
+		/* setup the clocksource, but do not announce it
+		 * as it may be re-set by the setup routines
+		 * called after the rest of the clocks have been
+		 * registered
+		 */
+		s3c_set_clksrc(clksrc, false);
+
+		ret = s3c24xx_register_clock(&clksrc->clk);
+
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to register %s (%d)\n",
+			       __func__, clksrc->clk.name, ret);
+		}
+	}
+}
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-samsung/clock.c
similarity index 78%
rename from arch/arm/plat-s3c/clock.c
rename to arch/arm/plat-samsung/clock.c
index 619cfa8..1b25c9d 100644
--- a/arch/arm/plat-s3c/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -150,8 +150,8 @@
 	if (clk->rate != 0)
 		return clk->rate;
 
-	if (clk->get_rate != NULL)
-		return (clk->get_rate)(clk);
+	if (clk->ops != NULL && clk->ops->get_rate != NULL)
+		return (clk->ops->get_rate)(clk);
 
 	if (clk->parent != NULL)
 		return clk_get_rate(clk->parent);
@@ -161,8 +161,8 @@
 
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	if (!IS_ERR(clk) && clk->round_rate)
-		return (clk->round_rate)(clk, rate);
+	if (!IS_ERR(clk) && clk->ops && clk->ops->round_rate)
+		return (clk->ops->round_rate)(clk, rate);
 
 	return rate;
 }
@@ -178,13 +178,14 @@
 	 * the clock may have been made this way by choice.
 	 */
 
-	WARN_ON(clk->set_rate == NULL);
+	WARN_ON(clk->ops == NULL);
+	WARN_ON(clk->ops && clk->ops->set_rate == NULL);
 
-	if (clk->set_rate == NULL)
+	if (clk->ops == NULL || clk->ops->set_rate == NULL)
 		return -EINVAL;
 
 	spin_lock(&clocks_lock);
-	ret = (clk->set_rate)(clk, rate);
+	ret = (clk->ops->set_rate)(clk, rate);
 	spin_unlock(&clocks_lock);
 
 	return ret;
@@ -204,8 +205,8 @@
 
 	spin_lock(&clocks_lock);
 
-	if (clk->set_parent)
-		ret = (clk->set_parent)(clk, parent);
+	if (clk->ops && clk->ops->set_parent)
+		ret = (clk->ops->set_parent)(clk, parent);
 
 	spin_unlock(&clocks_lock);
 
@@ -224,12 +225,16 @@
 
 /* base clocks */
 
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
+int clk_default_setrate(struct clk *clk, unsigned long rate)
 {
 	clk->rate = rate;
 	return 0;
 }
 
+struct clk_ops clk_ops_def_setrate = {
+	.set_rate	= clk_default_setrate,
+};
+
 struct clk clk_xtal = {
 	.name		= "xtal",
 	.id		= -1,
@@ -251,7 +256,7 @@
 struct clk clk_mpll = {
 	.name		= "mpll",
 	.id		= -1,
-	.set_rate	= clk_default_setrate,
+	.ops		= &clk_ops_def_setrate,
 };
 
 struct clk clk_upll = {
@@ -267,7 +272,6 @@
 	.rate		= 0,
 	.parent		= &clk_mpll,
 	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
 };
 
 struct clk clk_h = {
@@ -276,7 +280,7 @@
 	.rate		= 0,
 	.parent		= NULL,
 	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
+	.ops		= &clk_ops_def_setrate,
 };
 
 struct clk clk_p = {
@@ -285,7 +289,7 @@
 	.rate		= 0,
 	.parent		= NULL,
 	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
+	.ops		= &clk_ops_def_setrate,
 };
 
 struct clk clk_usb_bus = {
@@ -296,7 +300,6 @@
 };
 
 
-
 struct clk s3c24xx_uclk = {
 	.name		= "uclk",
 	.id		= -1,
@@ -304,6 +307,12 @@
 
 /* initialise the clock system */
 
+/**
+ * s3c24xx_register_clock() - register a clock
+ * @clk: The clock to register
+ *
+ * Add the specified clock to the list of clocks known by the system.
+ */
 int s3c24xx_register_clock(struct clk *clk)
 {
 	if (clk->enable == NULL)
@@ -321,18 +330,52 @@
 	return 0;
 }
 
+/**
+ * s3c24xx_register_clocks() - register an array of clock pointers
+ * @clks: Pointer to an array of struct clk pointers
+ * @nr_clks: The number of clocks in the @clks array.
+ *
+ * Call s3c24xx_register_clock() for all the clock pointers contained
+ * in the @clks list. Returns the number of failures.
+ */
 int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
 {
 	int fails = 0;
 
 	for (; nr_clks > 0; nr_clks--, clks++) {
-		if (s3c24xx_register_clock(*clks) < 0)
+		if (s3c24xx_register_clock(*clks) < 0) {
+			struct clk *clk = *clks;
+			printk(KERN_ERR "%s: failed to register %p: %s\n",
+			       __func__, clk, clk->name);
 			fails++;
+		}
 	}
 
 	return fails;
 }
 
+/**
+ * s3c_register_clocks() - register an array of clocks
+ * @clkp: Pointer to the first clock in the array.
+ * @nr_clks: Number of clocks to register.
+ *
+ * Call s3c24xx_register_clock() on the @clkp array given, printing an
+ * error if it fails to register the clock (unlikely).
+ */
+void __init s3c_register_clocks(struct clk *clkp, int nr_clks)
+{
+	int ret;
+
+	for (; nr_clks > 0; nr_clks--, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+}
+
 /* initalise all the clocks */
 
 int __init s3c24xx_register_baseclocks(unsigned long xtal)
diff --git a/arch/arm/plat-s3c/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-fb.c
rename to arch/arm/plat-samsung/dev-fb.c
diff --git a/arch/arm/plat-s3c/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-hsmmc.c
rename to arch/arm/plat-samsung/dev-hsmmc.c
diff --git a/arch/arm/plat-s3c/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-hsmmc1.c
rename to arch/arm/plat-samsung/dev-hsmmc1.c
diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-hsmmc2.c
rename to arch/arm/plat-samsung/dev-hsmmc2.c
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-i2c0.c
rename to arch/arm/plat-samsung/dev-i2c0.c
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-i2c1.c
rename to arch/arm/plat-samsung/dev-i2c1.c
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-nand.c
rename to arch/arm/plat-samsung/dev-nand.c
diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c
new file mode 100644
index 0000000..3776cd9
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-uart.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-samsung/dev-uart.c
+ *	originally from arch/arm/plat-s3c24xx/devs.c
+ *x
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Base S3C24XX platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+	.id		= 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+	.id		= 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+	.id		= 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+	.id		= 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+	&s3c24xx_uart_device0,
+	&s3c24xx_uart_device1,
+	&s3c24xx_uart_device2,
+	&s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c
similarity index 85%
rename from arch/arm/plat-s3c/dev-usb-hsotg.c
rename to arch/arm/plat-samsung/dev-usb-hsotg.c
index e2f604b..33a844a 100644
--- a/arch/arm/plat-s3c/dev-usb-hsotg.c
+++ b/arch/arm/plat-samsung/dev-usb-hsotg.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include <mach/irqs.h>
 #include <mach/map.h>
@@ -33,9 +34,15 @@
 	},
 };
 
+static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32);
+
 struct platform_device s3c_device_usb_hsotg = {
 	.name		= "s3c-hsotg",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
 	.resource	= s3c_usb_hsotg_resources,
+	.dev		= {
+		.dma_mask		= &s3c_hsotg_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };
diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c
similarity index 61%
rename from arch/arm/plat-s3c/dev-usb.c
rename to arch/arm/plat-samsung/dev-usb.c
index 2ee85ab..8816565 100644
--- a/arch/arm/plat-s3c/dev-usb.c
+++ b/arch/arm/plat-samsung/dev-usb.c
@@ -19,7 +19,7 @@
 #include <mach/map.h>
 
 #include <plat/devs.h>
-
+#include <plat/usb-control.h>
 
 static struct resource s3c_usb_resource[] = {
 	[0] = {
@@ -36,7 +36,7 @@
 
 static u64 s3c_device_usb_dmamask = 0xffffffffUL;
 
-struct platform_device s3c_device_usb = {
+struct platform_device s3c_device_ohci = {
 	.name		  = "s3c2410-ohci",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
@@ -47,4 +47,23 @@
 	}
 };
 
-EXPORT_SYMBOL(s3c_device_usb);
+EXPORT_SYMBOL(s3c_device_ohci);
+
+/**
+ * s3c_ohci_set_platdata - initialise OHCI device platform data
+ * @info: The platform data.
+ *
+ * This call copies the @info passed in and sets the device .platform_data
+ * field to that copy. The @info is copied so that the original can be marked
+ * __initdata.
+ */
+void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
+{
+	struct s3c2410_hcd_info *npd;
+
+	npd = kmemdup(info, sizeof(struct s3c2410_hcd_info), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+	s3c_device_ohci.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-samsung/dma.c
similarity index 96%
rename from arch/arm/plat-s3c/dma.c
rename to arch/arm/plat-samsung/dma.c
index a995850..cb459dd 100644
--- a/arch/arm/plat-s3c/dma.c
+++ b/arch/arm/plat-samsung/dma.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c/dma.c
+/* linux/arch/arm/plat-samsung/dma.c
  *
  * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -20,8 +20,6 @@
 #include <mach/dma.h>
 #include <mach/irqs.h>
 
-#include <plat/dma-plat.h>
-
 /* dma channel state information */
 struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
 struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
similarity index 98%
rename from arch/arm/plat-s3c/gpio-config.c
rename to arch/arm/plat-samsung/gpio-config.c
index 456969b..44a84e8 100644
--- a/arch/arm/plat-s3c/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -17,7 +17,7 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-samsung/gpio.c
similarity index 98%
rename from arch/arm/plat-s3c/gpio.c
rename to arch/arm/plat-samsung/gpio.c
index 5ff24e0..28d2ab8 100644
--- a/arch/arm/plat-s3c/gpio.c
+++ b/arch/arm/plat-samsung/gpio.c
@@ -16,7 +16,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
 
 #ifdef CONFIG_S3C_GPIO_TRACK
 struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c
new file mode 100644
index 0000000..8a8ba8b
--- /dev/null
+++ b/arch/arm/plat-samsung/gpiolib.c
@@ -0,0 +1,199 @@
+/* arch/arm/plat-samsung/gpiolib.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * SAMSUNG - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+#ifndef DEBUG_GPIO
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+/* The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+*/
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + GPIOCON_OFF);
+
+	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, base + GPIOCON_OFF);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+/* The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
+ * store the 'base + 0x4' address so that these routines see the data
+ * register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+
+	if (offset > 7)
+		offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned con_offset = offset;
+
+	if (con_offset > 7)
+		con_offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = samsung_gpiolib_4bit_input;
+	chip->chip.direction_output = samsung_gpiolib_4bit_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+	chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
+					   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		samsung_gpiolib_add_4bit(chip);
+		s3c_gpiolib_add(chip);
+	}
+}
+
+void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
+					    int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		samsung_gpiolib_add_4bit2(chip);
+		s3c_gpiolib_add(chip);
+	}
+}
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-samsung/include/plat/adc.h
similarity index 92%
rename from arch/arm/plat-s3c/include/plat/adc.h
rename to arch/arm/plat-samsung/include/plat/adc.h
index 5f3b1cd..e8382c7 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-samsung/include/plat/adc.h
@@ -1,10 +1,10 @@
-/* arch/arm/plat-s3c/include/plat/adc.h
+/* arch/arm/plat-samsung/include/plat/adc.h
  *
  * Copyright (c) 2008 Simtec Electronics
  *	http://armlinux.simnte.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C24XX ADC driver information
+ * S3C ADC driver information
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
similarity index 64%
rename from arch/arm/plat-s3c/include/plat/audio.h
rename to arch/arm/plat-samsung/include/plat/audio.h
index f22d23b..e32f9ed 100644
--- a/arch/arm/plat-s3c/include/plat/audio.h
+++ b/arch/arm/plat-samsung/include/plat/audio.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/audio.h
+/* arch/arm/plat-samsung/include/plat/audio.h
  *
  * Copyright (c) 2009 Samsung Electronics Co. Ltd
  * Author: Jaswinder Singh <jassi.brar@samsung.com>
@@ -8,6 +8,14 @@
  * published by the Free Software Foundation.
  */
 
+/* The machine init code calls s3c*_ac97_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for AC97 pins
+ */
+#define S3C64XX_AC97_GPD  0
+#define S3C64XX_AC97_GPE  1
+extern void s3c64xx_ac97_setup_gpio(int);
+
 /**
  * struct s3c_audio_pdata - common platform data for audio device drivers
  * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
diff --git a/arch/arm/plat-samsung/include/plat/clock-clksrc.h b/arch/arm/plat-samsung/include/plat/clock-clksrc.h
new file mode 100644
index 0000000..50a8ca7
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/clock-clksrc.h
@@ -0,0 +1,83 @@
+/* linux/arch/arm/plat-samsung/include/plat/clock-clksrc.h
+ *
+ * Parts taken from arch/arm/plat-s3c64xx/clock.c
+ *	Copyright 2008 Openmoko, Inc.
+ *	Copyright 2008 Simtec Electronics
+ *		Ben Dooks <ben@simtec.co.uk>
+ *		http://armlinux.simtec.co.uk/
+ *
+ * Copyright 2009 Ben Dooks <ben-linux@fluff.org>
+ * Copyright 2009 Harald Welte
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * struct clksrc_sources - list of sources for a given clock
+ * @sources: array of pointers to clocks
+ * @nr_sources: The size of @sources
+ */
+struct clksrc_sources {
+	unsigned int	nr_sources;
+	struct clk	**sources;
+};
+
+/**
+ * struct clksrc_reg - register definition for clock control bits
+ * @reg: pointer to the register in virtual memory.
+ * @shift: the shift in bits to where the bitfield is.
+ * @size: the size in bits of the bitfield.
+ *
+ * This specifies the size and position of the bits we are interested
+ * in within the register specified by @reg.
+ */
+struct clksrc_reg {
+	void __iomem		*reg;
+	unsigned short		shift;
+	unsigned short		size;
+};
+
+/**
+ * struct clksrc_clk - class of clock for newer style samsung devices.
+ * @clk: the standard clock representation
+ * @sources: the sources for this clock
+ * @reg_src: the register definition for selecting the clock's source
+ * @reg_div: the register definition for the clock's output divisor
+ *
+ * This clock implements the features required by the newer SoCs where
+ * the standard clock block provides an input mux and a post-mux divisor
+ * to provide the periperhal's clock.
+ *
+ * The array of @sources provides the mapping of mux position to the
+ * clock, and @reg_src shows the code where to modify to change the mux
+ * position. The @reg_div defines how to change the divider settings on
+ * the output.
+ */
+struct clksrc_clk {
+	struct clk		clk;
+	struct clksrc_sources	*sources;
+
+	struct clksrc_reg	reg_src;
+	struct clksrc_reg	reg_div;
+};
+
+/**
+ * s3c_set_clksrc() - setup the clock from the register settings
+ * @clk: The clock to setup.
+ * @announce: true to announce the setting to printk().
+ *
+ * Setup the clock from the current register settings, for when the
+ * kernel boots or if it is resuming from a possibly unknown state.
+ */
+extern void s3c_set_clksrc(struct clksrc_clk *clk, bool announce);
+
+/**
+ * s3c_register_clksrc() register clocks from an array of clksrc clocks
+ * @srcs: The array of clocks to register
+ * @size: The size of the @srcs array.
+ *
+ * Initialise and register the array of clocks described by @srcs.
+ */
+extern void s3c_register_clksrc(struct clksrc_clk *srcs, int size);
diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
similarity index 72%
rename from arch/arm/plat-s3c/include/plat/clock.h
rename to arch/arm/plat-samsung/include/plat/clock.h
index d86af84..60b6269 100644
--- a/arch/arm/plat-s3c/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -11,6 +11,30 @@
 
 #include <linux/spinlock.h>
 
+struct clk;
+
+/**
+ * struct clk_ops - standard clock operations
+ * @set_rate: set the clock rate, see clk_set_rate().
+ * @get_rate: get the clock rate, see clk_get_rate().
+ * @round_rate: round a given clock rate, see clk_round_rate().
+ * @set_parent: set the clock's parent, see clk_set_parent().
+ *
+ * Group the common clock implementations together so that we
+ * don't have to keep setting the same fiels again. We leave
+ * enable in struct clk.
+ *
+ * Adding an extra layer of indirection into the process should
+ * not be a problem as it is unlikely these operations are going
+ * to need to be called quickly.
+ */
+struct clk_ops {
+	int		    (*set_rate)(struct clk *c, unsigned long rate);
+	unsigned long	    (*get_rate)(struct clk *c);
+	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
+	int		    (*set_parent)(struct clk *c, struct clk *parent);
+};
+
 struct clk {
 	struct list_head      list;
 	struct module        *owner;
@@ -21,11 +45,8 @@
 	unsigned long         rate;
 	unsigned long         ctrlbit;
 
+	struct clk_ops		*ops;
 	int		    (*enable)(struct clk *, int enable);
-	int		    (*set_rate)(struct clk *c, unsigned long rate);
-	unsigned long	    (*get_rate)(struct clk *c);
-	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
-	int		    (*set_parent)(struct clk *c, struct clk *parent);
 };
 
 /* other clocks which may be registered by board support */
@@ -54,6 +75,9 @@
 extern struct clk clk_27m;
 extern struct clk clk_48m;
 
+extern int clk_default_setrate(struct clk *clk, unsigned long rate);
+extern struct clk_ops clk_ops_def_setrate;
+
 /* exports for arch/arm/mach-s3c2410
  *
  * Please DO NOT use these outside of arch/arm/mach-s3c2410
@@ -66,9 +90,11 @@
 extern int s3c24xx_register_clock(struct clk *clk);
 extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
 
+extern void s3c_register_clocks(struct clk *clk, int nr_clks);
+
 extern int s3c24xx_register_baseclocks(unsigned long xtal);
 
-extern void s3c64xx_register_clocks(void);
+extern void s5p_register_clocks(unsigned long xtal_freq);
 
 extern void s3c24xx_setup_clocks(unsigned long fclk,
 				 unsigned long hclk,
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/cpu-freq.h
rename to arch/arm/plat-samsung/include/plat/cpu-freq.h
index 94eb06a..80c4a80 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+/* arch/arm/plat-samsung/include/plat/cpu-freq.h
  *
  * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
similarity index 91%
rename from arch/arm/plat-s3c/include/plat/cpu.h
rename to arch/arm/plat-samsung/include/plat/cpu.h
index d1131ca..d316b4a 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c/include/plat/cpu.h
+/* linux/arch/arm/plat-samsung/include/plat/cpu.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -48,9 +48,12 @@
 
 extern void s3c24xx_init_irq(void);
 extern void s3c64xx_init_irq(u32 vic0, u32 vic1);
+extern void s5p_init_irq(u32 *vic, u32 num_vic);
 
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
 extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
+extern void s5p_init_io(struct map_desc *mach_desc,
+			int size, void __iomem *cpuid_addr);
 
 extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S
similarity index 81%
rename from arch/arm/plat-s3c/include/plat/debug-macro.S
rename to arch/arm/plat-samsung/include/plat/debug-macro.S
index 3634d4e..dc6efd90 100644
--- a/arch/arm/plat-s3c/include/plat/debug-macro.S
+++ b/arch/arm/plat-samsung/include/plat/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c/debug-macro.S
+/* arch/arm/plat-samsung/include/plat/debug-macro.S
  *
  * Copyright 2005, 2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -11,6 +11,18 @@
 
 #include <plat/regs-serial.h>
 
+/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */
+
+	.macro fifo_level_s5pv210 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
+	.endm
+
+	.macro  fifo_full_s5pv210 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		tst	\rd, #S5PV210_UFSTAT_TXFULL
+	.endm
+
 /* The S3C2440 implementations are used by default as they are the
  * most widely re-used */
 
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
similarity index 87%
rename from arch/arm/plat-s3c/include/plat/devs.h
rename to arch/arm/plat-samsung/include/plat/devs.h
index c1c20b0..796d2425 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/devs.h
+/* arch/arm/plat-samsung/include/plat/devs.h
  *
  * Copyright (c) 2004 Simtec Electronics
  * Ben Dooks <ben@simtec.co.uk>
@@ -18,6 +18,7 @@
 
 extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
 extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
+extern struct s3c24xx_uart_resources s5p_uart_resources[];
 
 extern struct platform_device *s3c24xx_uart_devs[];
 extern struct platform_device *s3c24xx_uart_src[];
@@ -28,12 +29,18 @@
 extern struct platform_device s3c64xx_device_iis1;
 extern struct platform_device s3c64xx_device_iisv4;
 
+extern struct platform_device s3c64xx_device_spi0;
+extern struct platform_device s3c64xx_device_spi1;
+
 extern struct platform_device s3c64xx_device_pcm0;
 extern struct platform_device s3c64xx_device_pcm1;
 
+extern struct platform_device s3c64xx_device_ac97;
+
 extern struct platform_device s3c_device_ts;
+
 extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_usb;
+extern struct platform_device s3c_device_ohci;
 extern struct platform_device s3c_device_lcd;
 extern struct platform_device s3c_device_wdt;
 extern struct platform_device s3c_device_i2c0;
diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-samsung/include/plat/dma-core.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/dma-core.h
rename to arch/arm/plat-samsung/include/plat/dma-core.h
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
similarity index 94%
rename from arch/arm/plat-s3c24xx/include/plat/dma-plat.h
rename to arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index 9565ead..336d5ac 100644
--- a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -1,9 +1,9 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
+/* linux/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
  *
  * Copyright (C) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C24XX DMA support
+ * Samsung S3C24XX DMA support - per SoC functions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/dma.h
rename to arch/arm/plat-samsung/include/plat/dma.h
index e429d10..7584d75 100644
--- a/arch/arm/plat-s3c/include/plat/dma.h
+++ b/arch/arm/plat-samsung/include/plat/dma.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/dma.h
+/* arch/arm/plat-samsung/include/plat/dma.h
  *
  * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
similarity index 97%
rename from arch/arm/plat-s3c/include/plat/fb.h
rename to arch/arm/plat-samsung/include/plat/fb.h
index f8db879..ffc01a7 100644
--- a/arch/arm/plat-s3c/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c/include/plat/fb.h
+/* arch/arm/plat-samsung/include/plat/fb.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
rename to arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 652e2bb..dda19da 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -78,7 +78,7 @@
  *	others = Special functions (dependant on bank)
  *
  * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a seperate set of functions for
+ * registers instead of one, we do not have a separate set of functions for
  * each case.
 */
 extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/gpio-cfg.h
rename to arch/arm/plat-samsung/include/plat/gpio-cfg.h
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
similarity index 76%
rename from arch/arm/plat-s3c/include/plat/gpio-core.h
rename to arch/arm/plat-samsung/include/plat/gpio-core.h
index 32af612..49ff406 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -11,6 +11,11 @@
  * published by the Free Software Foundation.
 */
 
+#define GPIOCON_OFF	(0x00)
+#define GPIODAT_OFF	(0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
 /* Define the core gpiolib support functions that the s3c platforms may
  * need to extend or change depending on the hardware and the s3c chip
  * selected at build or found at run time.
@@ -80,6 +85,29 @@
  * and any other necessary functions.
  */
 
+/**
+ * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependant on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a seperate set of function
+ * (samsung_gpiolib_add_4bit2_chips)for each case.
+ */
+extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
+					   int nr_chips);
+extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
+					    int nr_chips);
+
+extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
+extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
+
 #ifdef CONFIG_S3C_GPIO_TRACK
 extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
 
@@ -90,6 +118,8 @@
 #else
 /* machine specific code should provide s3c_gpiolib_getchip */
 
+#include <mach/gpio-track.h>
+
 static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
 #endif
 
diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/hwmon.h
rename to arch/arm/plat-samsung/include/plat/hwmon.h
diff --git a/arch/arm/plat-s3c/include/plat/iic-core.h b/arch/arm/plat-samsung/include/plat/iic-core.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/iic-core.h
rename to arch/arm/plat-samsung/include/plat/iic-core.h
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/iic.h
rename to arch/arm/plat-samsung/include/plat/iic.h
diff --git a/arch/arm/plat-samsung/include/plat/irq-uart.h b/arch/arm/plat-samsung/include/plat/irq-uart.h
new file mode 100644
index 0000000..a9331e4
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/irq-uart.h
@@ -0,0 +1,20 @@
+/* arch/arm/plat-samsung/include/plat/irq-uart.h
+ *
+ * Copyright (c) 2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung SoC UART IRQ demux for S3C64XX and later
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c_uart_irq {
+	void __iomem	*regs;
+	unsigned int	 base_irq;
+	unsigned int	 parent_irq;
+};
+
+extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs);
+
diff --git a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
new file mode 100644
index 0000000..a90b534
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
@@ -0,0 +1,13 @@
+/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h
+ *
+ * Copyright (c) 2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung SoC IRQ VIC timer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void s3c_init_vic_timer_irq(unsigned int vic, unsigned int timer);
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-samsung/include/plat/map-base.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/map-base.h
rename to arch/arm/plat-samsung/include/plat/map-base.h
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h
similarity index 97%
rename from arch/arm/plat-s3c/include/plat/nand.h
rename to arch/arm/plat-samsung/include/plat/nand.h
index 226147b7..b64115f 100644
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ b/arch/arm/plat-samsung/include/plat/nand.h
@@ -3,7 +3,7 @@
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - NAND device controller platfrom_device info
+ * S3C2410 - NAND device controller platform_device info
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
similarity index 97%
rename from arch/arm/plat-s3c/include/plat/pm.h
rename to arch/arm/plat-samsung/include/plat/pm.h
index 7a79719..245836d 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/pm.h
+/* arch/arm/plat-samsung/include/plat/pm.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -111,7 +111,7 @@
 
 /* PM debug functions */
 
-#ifdef CONFIG_S3C2410_PM_DEBUG
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
 /**
  * s3c_pm_dbg() - low level debug function for use in suspend/resume.
  * @msg: The message to print.
@@ -141,7 +141,7 @@
 
 /* suspend memory checking */
 
-#ifdef CONFIG_S3C2410_PM_CHECK
+#ifdef CONFIG_SAMSUNG_PM_CHECK
 extern void s3c_pm_check_prepare(void);
 extern void s3c_pm_check_restore(void);
 extern void s3c_pm_check_cleanup(void);
diff --git a/arch/arm/plat-s3c/include/plat/regs-ac97.h b/arch/arm/plat-samsung/include/plat/regs-ac97.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-ac97.h
rename to arch/arm/plat-samsung/include/plat/regs-ac97.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h
similarity index 90%
rename from arch/arm/plat-s3c/include/plat/regs-adc.h
rename to arch/arm/plat-samsung/include/plat/regs-adc.h
index 4323ccc..7554c4f 100644
--- a/arch/arm/plat-s3c/include/plat/regs-adc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-adc.h
@@ -19,9 +19,13 @@
 #define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
 #define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
 #define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
+#define S3C64XX_ADCUPDN		S3C2410_ADCREG(0x14)
+#define S3C64XX_ADCCLRINT	S3C2410_ADCREG(0x18)
+#define S3C64XX_ADCCLRINTPNDNUP	S3C2410_ADCREG(0x20)
 
 
 /* ADCCON Register Bits */
+#define S3C64XX_ADCCON_RESSEL		(1<<16)
 #define S3C2410_ADCCON_ECFLG		(1<<15)
 #define S3C2410_ADCCON_PRSCEN		(1<<14)
 #define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/regs-fb-v4.h
rename to arch/arm/plat-samsung/include/plat/regs-fb-v4.h
index a60ed0d..0f43599 100644
--- a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+/* arch/arm/plat-samsung/include/plat/regs-fb-v4.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h
similarity index 99%
rename from arch/arm/plat-s3c/include/plat/regs-fb.h
rename to arch/arm/plat-samsung/include/plat/regs-fb.h
index e9ee599..0ef806e 100644
--- a/arch/arm/plat-s3c/include/plat/regs-fb.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/regs-fb.h
+/* arch/arm/plat-samsung/include/plat/regs-fb.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c/include/plat/regs-iic.h b/arch/arm/plat-samsung/include/plat/regs-iic.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-iic.h
rename to arch/arm/plat-samsung/include/plat/regs-iic.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-irqtype.h b/arch/arm/plat-samsung/include/plat/regs-irqtype.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-irqtype.h
rename to arch/arm/plat-samsung/include/plat/regs-irqtype.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-samsung/include/plat/regs-nand.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-nand.h
rename to arch/arm/plat-samsung/include/plat/regs-nand.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-rtc.h
rename to arch/arm/plat-samsung/include/plat/regs-rtc.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
rename to arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-sdhci.h b/arch/arm/plat-samsung/include/plat/regs-sdhci.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-sdhci.h
rename to arch/arm/plat-samsung/include/plat/regs-sdhci.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
similarity index 87%
rename from arch/arm/plat-s3c/include/plat/regs-serial.h
rename to arch/arm/plat-samsung/include/plat/regs-serial.h
index 85d8904..a6eba84 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
+/* arch/arm/plat-samsung/include/plat/regs-serial.h
  *
  *  From linux/include/asm-arm/hardware/serial_s3c2410.h
  *
@@ -194,6 +194,36 @@
 #define S3C64XX_UINTSP		0x34
 #define S3C64XX_UINTM		0x38
 
+/* Following are specific to S5PV210 and S5P6442 */
+#define S5PV210_UCON_CLKMASK	(1<<10)
+#define S5PV210_UCON_PCLK	(0<<10)
+#define S5PV210_UCON_UCLK	(1<<10)
+
+#define S5PV210_UFCON_TXTRIG0	(0<<8)
+#define S5PV210_UFCON_TXTRIG4	(1<<8)
+#define S5PV210_UFCON_TXTRIG8	(2<<8)
+#define S5PV210_UFCON_TXTRIG16	(3<<8)
+#define S5PV210_UFCON_TXTRIG32	(4<<8)
+#define S5PV210_UFCON_TXTRIG64	(5<<8)
+#define S5PV210_UFCON_TXTRIG128 (6<<8)
+#define S5PV210_UFCON_TXTRIG256 (7<<8)
+
+#define S5PV210_UFCON_RXTRIG1	(0<<4)
+#define S5PV210_UFCON_RXTRIG4	(1<<4)
+#define S5PV210_UFCON_RXTRIG8	(2<<4)
+#define S5PV210_UFCON_RXTRIG16	(3<<4)
+#define S5PV210_UFCON_RXTRIG32	(4<<4)
+#define S5PV210_UFCON_RXTRIG64	(5<<4)
+#define S5PV210_UFCON_RXTRIG128	(6<<4)
+#define S5PV210_UFCON_RXTRIG256	(7<<4)
+
+#define S5PV210_UFSTAT_TXFULL	(1<<24)
+#define S5PV210_UFSTAT_RXFULL	(1<<8)
+#define S5PV210_UFSTAT_TXMASK	(255<<16)
+#define S5PV210_UFSTAT_TXSHIFT	(16)
+#define S5PV210_UFSTAT_RXMASK	(255<<0)
+#define S5PV210_UFSTAT_RXSHIFT	(0)
+
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc
diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-samsung/include/plat/regs-timer.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-timer.h
rename to arch/arm/plat-samsung/include/plat/regs-timer.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
similarity index 95%
rename from arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
rename to arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
index 36a85f5..a111ad8 100644
--- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
@@ -12,7 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-/* Note, this is a seperate header file as some of the clock framework
+/* Note, this is a separate header file as some of the clock framework
  * needs to touch this if the clk_48m is used as the USB OHCI or other
  * peripheral source.
 */
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
rename to arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-watchdog.h b/arch/arm/plat-samsung/include/plat/regs-watchdog.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-watchdog.h
rename to arch/arm/plat-samsung/include/plat/regs-watchdog.h
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
new file mode 100644
index 0000000..d177241
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -0,0 +1,67 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C64XX_PLAT_SPI_H
+#define __S3C64XX_PLAT_SPI_H
+
+/**
+ * struct s3c64xx_spi_csinfo - ChipSelect description
+ * @fb_delay: Slave specific feedback delay.
+ *            Refer to FB_CLK_SEL register definition in SPI chapter.
+ * @line: Custom 'identity' of the CS line.
+ * @set_level: CS line control.
+ *
+ * This is per SPI-Slave Chipselect information.
+ * Allocate and initialize one in machine init code and make the
+ * spi_board_info.controller_data point to it.
+ */
+struct s3c64xx_spi_csinfo {
+	u8 fb_delay;
+	unsigned line;
+	void (*set_level)(unsigned line_id, int lvl);
+};
+
+/**
+ * struct s3c64xx_spi_info - SPI Controller defining structure
+ * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
+ * @src_clk_name: Platform name of the corresponding clock.
+ * @num_cs: Number of CS this controller emulates.
+ * @cfg_gpio: Configure pins for this SPI controller.
+ * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
+ * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
+ * @high_speed: If the controller supports HIGH_SPEED_EN bit
+ */
+struct s3c64xx_spi_info {
+	int src_clk_nr;
+	char *src_clk_name;
+
+	int num_cs;
+
+	int (*cfg_gpio)(struct platform_device *pdev);
+
+	/* Following two fields are for future compatibility */
+	int fifo_lvl_mask;
+	int rx_lvl_offset;
+	int high_speed;
+};
+
+/**
+ * s3c64xx_spi_set_info - SPI Controller configure callback by the board
+ *				initialization code.
+ * @cntrlr: SPI controller number the configuration is for.
+ * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
+ * @num_cs: Number of elements in the 'cs' array.
+ *
+ * Call this from machine init code for each SPI Controller that
+ * has some chips attached to it.
+ */
+extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+
+#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
similarity index 87%
rename from arch/arm/plat-s3c/include/plat/sdhci.h
rename to arch/arm/plat-samsung/include/plat/sdhci.h
index 5319867..7d07cd7 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -78,8 +78,8 @@
 
 /* S3C6400 SDHCI setup */
 
-#ifdef CONFIG_S3C6400_SETUP_SDHCI
-extern char *s3c6400_hsmmc_clksrcs[4];
+#ifdef CONFIG_S3C64XX_SETUP_SDHCI
+extern char *s3c64xx_hsmmc_clksrcs[4];
 
 #ifdef CONFIG_S3C_DEV_HSMMC
 extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
@@ -89,7 +89,7 @@
 
 static inline void s3c6400_default_sdhci0(void)
 {
-	s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 }
@@ -101,7 +101,7 @@
 #ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s3c6400_default_sdhci1(void)
 {
-	s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 }
@@ -112,7 +112,7 @@
 #ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s3c6400_default_sdhci2(void)
 {
-	s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
 	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 }
@@ -120,27 +120,19 @@
 static inline void s3c6400_default_sdhci2(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC2 */
 
-#else
-static inline void s3c6400_default_sdhci0(void) { }
-static inline void s3c6400_default_sdhci1(void) { }
-#endif /* CONFIG_S3C6400_SETUP_SDHCI */
-
 /* S3C6410 SDHCI setup */
 
-#ifdef CONFIG_S3C6410_SETUP_SDHCI
-extern char *s3c6410_hsmmc_clksrcs[4];
-
-extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
+extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
+					 void __iomem *r,
+					 struct mmc_ios *ios,
+					 struct mmc_card *card);
 
 #ifdef CONFIG_S3C_DEV_HSMMC
 static inline void s3c6410_default_sdhci0(void)
 {
-	s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 }
 #else
 static inline void s3c6410_default_sdhci0(void) { }
@@ -149,9 +141,9 @@
 #ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s3c6410_default_sdhci1(void)
 {
-	s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 }
 #else
 static inline void s3c6410_default_sdhci1(void) { }
@@ -160,9 +152,9 @@
 #ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s3c6410_default_sdhci2(void)
 {
-	s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 }
 #else
 static inline void s3c6410_default_sdhci2(void) { }
@@ -171,7 +163,10 @@
 #else
 static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void) { }
-#endif /* CONFIG_S3C6410_SETUP_SDHCI */
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+
+#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
 
 /* S5PC100 SDHCI setup */
 
diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-samsung/include/plat/udc-hs.h
similarity index 93%
rename from arch/arm/plat-s3c/include/plat/udc-hs.h
rename to arch/arm/plat-samsung/include/plat/udc-hs.h
index dd04db0..a22a4f2 100644
--- a/arch/arm/plat-s3c/include/plat/udc-hs.h
+++ b/arch/arm/plat-samsung/include/plat/udc-hs.h
@@ -12,7 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-enum s3c_hostg_dmamode {
+enum s3c_hsotg_dmamode {
 	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
 	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
 	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
@@ -24,6 +24,6 @@
  * @is_osc: The clock source is an oscillator, not a crystal
  */
 struct s3c_hsotg_plat {
-	enum s3c_hostg_dmamode	dma;
+	enum s3c_hsotg_dmamode	dma;
 	unsigned int		is_osc : 1;
 };
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/uncompress.h
rename to arch/arm/plat-samsung/include/plat/uncompress.h
index dc66a47..e87ce8f 100644
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c/uncompress.h
+/* arch/arm/plat-samsung/include/plat/uncompress.h
  *
  * Copyright 2003, 2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c/include/plat/usb-control.h b/arch/arm/plat-samsung/include/plat/usb-control.h
similarity index 88%
rename from arch/arm/plat-s3c/include/plat/usb-control.h
rename to arch/arm/plat-samsung/include/plat/usb-control.h
index 822c87f..7fa1fbe 100644
--- a/arch/arm/plat-s3c/include/plat/usb-control.h
+++ b/arch/arm/plat-samsung/include/plat/usb-control.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/usb-control.h
+/* arch/arm/plat-samsung/include/plat/usb-control.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -38,4 +38,6 @@
 	}
 }
 
+extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
+
 #endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/watchdog-reset.h
rename to arch/arm/plat-samsung/include/plat/watchdog-reset.h
diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-samsung/init.c
similarity index 100%
rename from arch/arm/plat-s3c/init.c
rename to arch/arm/plat-samsung/init.c
diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c
new file mode 100644
index 0000000..4f8c102
--- /dev/null
+++ b/arch/arm/plat-samsung/irq-uart.c
@@ -0,0 +1,143 @@
+/* arch/arm/plat-samsung/irq-uart.c
+ *	originally part of arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Samsung- UART Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <plat/irq-uart.h>
+#include <plat/regs-serial.h>
+#include <plat/cpu.h>
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+	struct s3c_uart_irq *uirq = get_irq_chip_data(irq);
+	return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+	return irq & 3;
+}
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg &= ~(1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+	struct s3c_uart_irq *uirq = desc->handler_data;
+	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+	int base = uirq->base_irq;
+
+	if (pend & (1 << 0))
+		generic_handle_irq(base);
+	if (pend & (1 << 1))
+		generic_handle_irq(base + 1);
+	if (pend & (1 << 2))
+		generic_handle_irq(base + 2);
+	if (pend & (1 << 3))
+		generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+	.name		= "s3c-uart",
+	.mask		= s3c_irq_uart_mask,
+	.unmask		= s3c_irq_uart_unmask,
+	.mask_ack	= s3c_irq_uart_maskack,
+	.ack		= s3c_irq_uart_ack,
+};
+
+static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
+{
+	struct irq_desc *desc = irq_to_desc(uirq->parent_irq);
+	void __iomem *reg_base = uirq->regs;
+	unsigned int irq;
+	int offs;
+
+	/* mask all interrupts at the start. */
+	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+	for (offs = 0; offs < 3; offs++) {
+		irq = uirq->base_irq + offs;
+
+		set_irq_chip(irq, &s3c_irq_uart);
+		set_irq_chip_data(irq, uirq);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	desc->handler_data = uirq;
+	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+/**
+ * s3c_init_uart_irqs() - initialise UART IRQs and the necessary demuxing
+ * @irq: The interrupt data for registering
+ * @nr_irqs: The number of interrupt descriptions in @irq.
+ *
+ * Register the UART interrupts specified by @irq including the demuxing
+ * routines. This supports the S3C6400 and newer style of devices.
+ */
+void __init s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs)
+{
+	for (; nr_irqs > 0; nr_irqs--, irq++)
+		s3c_init_uart_irq(irq);
+}
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
new file mode 100644
index 0000000..0270519
--- /dev/null
+++ b/arch/arm/plat-samsung/irq-vic-timer.c
@@ -0,0 +1,86 @@
+/* arch/arm/plat-samsung/irq-vic-timer.c
+ *	originally part of arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/regs-timer.h>
+
+static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
+{
+	generic_handle_irq((int)desc->handler_data);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg &= ~(1 << (irq - IRQ_TIMER0));
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg |= 1 << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;
+	reg |= (1 << 5) << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+	.name		= "s3c-timer",
+	.mask		= s3c_irq_timer_mask,
+	.unmask		= s3c_irq_timer_unmask,
+	.ack		= s3c_irq_timer_ack,
+};
+
+/**
+ * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\
+ * @parent_irq: The parent IRQ on the VIC for the timer.
+ * @timer_irq: The IRQ to be used for the timer.
+ *
+ * Register the necessary IRQ chaining and support for the timer IRQs
+ * chained of the VIC.
+ */
+void __init s3c_init_vic_timer_irq(unsigned int parent_irq,
+				   unsigned int timer_irq)
+{
+	struct irq_desc *desc = irq_to_desc(parent_irq);
+
+	set_irq_chained_handler(parent_irq, s3c_irq_demux_vic_timer);
+
+	set_irq_chip(timer_irq, &s3c_irq_timer);
+	set_irq_handler(timer_irq, handle_level_irq);
+	set_irq_flags(timer_irq, IRQF_VALID);
+
+	desc->handler_data = (void *)timer_irq;
+}
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-samsung/pm-check.c
similarity index 95%
rename from arch/arm/plat-s3c/pm-check.c
rename to arch/arm/plat-samsung/pm-check.c
index 8eb1f43..0b5bb77 100644
--- a/arch/arm/plat-s3c/pm-check.c
+++ b/arch/arm/plat-samsung/pm-check.c
@@ -20,8 +20,8 @@
 
 #include <plat/pm.h>
 
-#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1
-#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value
+#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
+#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
 #endif
 
 /* suspend checking code...
@@ -29,12 +29,12 @@
  * this next area does a set of crc checks over all the installed
  * memory, so the system can verify if the resume was ok.
  *
- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
  * increasing it will mean that the area corrupted will be less easy to spot,
  * and reducing the size will cause the CRC save area to grow
 */
 
-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
+#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024)
 
 static u32 crc_size;	/* size needed for the crc block */
 static u32 *crcs;	/* allocated over suspend/resume */
diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
similarity index 99%
rename from arch/arm/plat-s3c/pm-gpio.c
rename to arch/arm/plat-samsung/pm-gpio.c
index cfd326a..69a4c7f 100644
--- a/arch/arm/plat-s3c/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -19,7 +19,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
 #include <plat/pm.h>
 
 /* PM GPIO helpers */
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-samsung/pm.c
similarity index 98%
rename from arch/arm/plat-s3c/pm.c
rename to arch/arm/plat-samsung/pm.c
index 7674706..27cfca5 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -29,7 +29,7 @@
 #include <asm/irq.h>
 
 #include <plat/pm.h>
-#include <plat/pm-core.h>
+#include <mach/pm-core.h>
 
 /* for external use */
 
@@ -41,7 +41,7 @@
  * resume before the console layer is available.
 */
 
-#ifdef CONFIG_S3C2410_PM_DEBUG
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
 extern void printascii(const char *);
 
 void s3c_pm_dbg(const char *fmt, ...)
@@ -65,13 +65,13 @@
 #else
 #define s3c_pm_debug_init() do { } while(0)
 
-#endif /* CONFIG_S3C2410_PM_DEBUG */
+#endif /* CONFIG_SAMSUNG_PM_DEBUG */
 
 /* Save the UART configurations if we are configured for debug. */
 
 unsigned char pm_uart_udivslot;
 
-#ifdef CONFIG_S3C2410_PM_DEBUG
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
 
 struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
 
diff --git a/arch/arm/plat-s3c/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c
similarity index 82%
rename from arch/arm/plat-s3c/pwm-clock.c
rename to arch/arm/plat-samsung/pwm-clock.c
index a318215..46c9381 100644
--- a/arch/arm/plat-s3c/pwm-clock.c
+++ b/arch/arm/plat-samsung/pwm-clock.c
@@ -130,20 +130,22 @@
 	return 0;
 }
 
+static struct clk_ops clk_pwm_scaler_ops = {
+	.get_rate	= clk_pwm_scaler_get_rate,
+	.set_rate	= clk_pwm_scaler_set_rate,
+	.round_rate	= clk_pwm_scaler_round_rate,
+};
+
 static struct clk clk_timer_scaler[] = {
 	[0]	= {
 		.name		= "pwm-scaler0",
 		.id		= -1,
-		.get_rate	= clk_pwm_scaler_get_rate,
-		.set_rate	= clk_pwm_scaler_set_rate,
-		.round_rate	= clk_pwm_scaler_round_rate,
+		.ops		= &clk_pwm_scaler_ops,
 	},
 	[1]	= {
 		.name		= "pwm-scaler1",
 		.id		= -1,
-		.get_rate	= clk_pwm_scaler_get_rate,
-		.set_rate	= clk_pwm_scaler_set_rate,
-		.round_rate	= clk_pwm_scaler_round_rate,
+		.ops		= &clk_pwm_scaler_ops,
 	},
 };
 
@@ -256,50 +258,46 @@
 	return 0;
 }
 
+static struct clk_ops clk_tdiv_ops = {
+	.get_rate	= clk_pwm_tdiv_get_rate,
+	.set_rate	= clk_pwm_tdiv_set_rate,
+	.round_rate	= clk_pwm_tdiv_round_rate,
+};
+
 static struct pwm_tdiv_clk clk_timer_tdiv[] = {
 	[0]	= {
 		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[0],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[0],
 		},
 	},
 	[1]	= {
 		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[0],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[0],
 		}
 	},
 	[2]	= {
 		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[1],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[1],
 		},
 	},
 	[3]	= {
 		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[1],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[1],
 		},
 	},
 	[4]	= {
 		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[1],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[1],
 		},
 	},
 };
@@ -356,31 +354,35 @@
 	return 0;
 }
 
+static struct clk_ops clk_tin_ops = {
+	.set_parent	= clk_pwm_tin_set_parent,
+};
+
 static struct clk clk_tin[] = {
 	[0]	= {
-		.name		= "pwm-tin",
-		.id		= 0,
-		.set_parent	= clk_pwm_tin_set_parent,
+		.name	= "pwm-tin",
+		.id	= 0,
+		.ops	= &clk_tin_ops,
 	},
 	[1]	= {
-		.name		= "pwm-tin",
-		.id		= 1,
-		.set_parent	= clk_pwm_tin_set_parent,
+		.name	= "pwm-tin",
+		.id	= 1,
+		.ops	= &clk_tin_ops,
 	},
 	[2]	= {
-		.name		= "pwm-tin",
-		.id		= 2,
-		.set_parent	= clk_pwm_tin_set_parent,
+		.name	= "pwm-tin",
+		.id	= 2,
+		.ops	= &clk_tin_ops,
 	},
 	[3]	= {
-		.name		= "pwm-tin",
-		.id		= 3,
-		.set_parent	= clk_pwm_tin_set_parent,
+		.name	= "pwm-tin",
+		.id	= 3,
+		.ops	= &clk_tin_ops,
 	},
 	[4]	= {
-		.name		= "pwm-tin",
-		.id		= 4,
-		.set_parent	= clk_pwm_tin_set_parent,
+		.name	= "pwm-tin",
+		.id	= 4,
+		.ops	= &clk_tin_ops,
 	},
 };
 
@@ -428,25 +430,15 @@
 		return;
 	}
 
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
+	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++)
 		clk_timer_scaler[clk].parent = clk_timers;
-		ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
-			return;
-		}
-	}
 
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) {
-		ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pww tclk%d\n", clk);
-			return;
-		}
-	}
+	s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler));
+	s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk));
 
 	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
 		ret = clk_pwm_tdiv_register(clk);
+
 		if (ret < 0) {
 			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
 			return;
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-samsung/pwm.c
similarity index 100%
rename from arch/arm/plat-s3c/pwm.c
rename to arch/arm/plat-samsung/pwm.c
diff --git a/arch/arm/plat-s3c/time.c b/arch/arm/plat-samsung/time.c
similarity index 99%
rename from arch/arm/plat-s3c/time.c
rename to arch/arm/plat-samsung/time.c
index 3b27b29..2231d80 100644
--- a/arch/arm/plat-s3c/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/time.c
+/* linux/arch/arm/plat-samsung/time.c
  *
  * Copyright (C) 2003-2005 Simtec Electronics
  *	Ben Dooks, <ben@simtec.co.uk>
diff --git a/arch/avr32/include/asm/ptrace.h b/arch/avr32/include/asm/ptrace.h
index 9e2d44f..e53dd0d 100644
--- a/arch/avr32/include/asm/ptrace.h
+++ b/arch/avr32/include/asm/ptrace.h
@@ -124,6 +124,8 @@
 
 #include <asm/ocd.h>
 
+#define arch_has_single_step()		(1)
+
 #define arch_ptrace_attach(child)       ocd_enable(child)
 
 #define user_mode(regs)                 (((regs)->sr & MODE_MASK) == MODE_USER)
diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c
index 1fed38f..dd5b882 100644
--- a/arch/avr32/kernel/ptrace.c
+++ b/arch/avr32/kernel/ptrace.c
@@ -28,9 +28,9 @@
 				  THREAD_SIZE - sizeof(struct pt_regs));
 }
 
-static void ptrace_single_step(struct task_struct *tsk)
+static void user_enable_single_step(struct task_struct *tsk)
 {
-	pr_debug("ptrace_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n",
+	pr_debug("user_enable_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n",
 		 tsk->pid, task_pt_regs(tsk)->pc, task_pt_regs(tsk)->sr);
 
 	/*
@@ -49,6 +49,11 @@
 	set_tsk_thread_flag(tsk, TIF_SINGLE_STEP);
 }
 
+void user_disable_single_step(struct task_struct *child)
+{
+	/* XXX(hch): a no-op here seems wrong.. */
+}
+
 /*
  * Called by kernel/ptrace.c when detaching
  *
@@ -167,50 +172,6 @@
 		ret = ptrace_write_user(child, addr, data);
 		break;
 
-	/* continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-	/* restart after signal */
-	case PTRACE_CONT:
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		/* XXX: Are we sure no breakpoints are active here? */
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-	/*
-	 * Make the child exit. Best I can do is send it a
-	 * SIGKILL. Perhaps it should be put in the status that it
-	 * wants to exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
-	/*
-	 * execute single instruction.
-	 */
-	case PTRACE_SINGLESTEP:
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		ptrace_single_step(child);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-
 	case PTRACE_GETREGS:
 		ret = ptrace_getregs(child, (void __user *)data);
 		break;
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index f9172ff..413a303 100644
--- a/arch/blackfin/include/asm/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -65,13 +65,6 @@
 	}
 }
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single is performed.
- */
 static inline dma_addr_t
 dma_map_single(struct device *dev, void *ptr, size_t size,
 	       enum dma_data_direction dir)
@@ -88,14 +81,6 @@
 	return dma_map_single(dev, page_address(page) + offset, size, dir);
 }
 
-/*
- * Unmap a single streaming mode DMA translation.  The dma_addr and size
- * must match what was provided for in a previous pci_map_single call.  All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guarenteed to see
- * whatever the device wrote there.
- */
 static inline void
 dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		 enum dma_data_direction dir)
@@ -110,30 +95,9 @@
 	dma_unmap_single(dev, dma_addr, size, dir);
 }
 
-/*
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
 extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 		      enum dma_data_direction dir);
 
-/*
- * Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
 static inline void
 dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 	     int nhwentries, enum dma_data_direction dir)
diff --git a/arch/blackfin/include/asm/nand.h b/arch/blackfin/include/asm/nand.h
index 3ae8b56..3a1e79dfc 100644
--- a/arch/blackfin/include/asm/nand.h
+++ b/arch/blackfin/include/asm/nand.h
@@ -1,5 +1,5 @@
 /*
- * BF5XX - NAND flash controller platfrom_device info
+ * BF5XX - NAND flash controller platform_device info
  *
  * Copyright 2007-2008 Analog Devices, Inc.
  *
@@ -8,7 +8,7 @@
 
 /* struct bf5xx_nand_platform
  *
- * define a interface between platfrom board specific code and
+ * define a interface between platform board specific code and
  * bf54x NFC driver.
  *
  * nr_partitions = number of partitions pointed to be partitoons (or zero)
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
index c52bef3..0d6420d 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -692,7 +692,7 @@
 	.long sys_swapon
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c
index ee505b2..e70c804 100644
--- a/arch/cris/arch-v10/kernel/ptrace.c
+++ b/arch/cris/arch-v10/kernel/ptrace.c
@@ -127,57 +127,6 @@
 			ret = 0;
 			break;
 
-		case PTRACE_SYSCALL:
-		case PTRACE_CONT:
-			ret = -EIO;
-			
-			if (!valid_signal(data))
-				break;
-                        
-			if (request == PTRACE_SYSCALL) {
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			}
-			else {
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			}
-			
-			child->exit_code = data;
-			
-			/* TODO: make sure any pending breakpoint is killed */
-			wake_up_process(child);
-			ret = 0;
-			
-			break;
-		
- 		/* Make the child exit by sending it a sigkill. */
-		case PTRACE_KILL:
-			ret = 0;
-			
-			if (child->exit_state == EXIT_ZOMBIE)
-				break;
-			
-			child->exit_code = SIGKILL;
-			
-			/* TODO: make sure any pending breakpoint is killed */
-			wake_up_process(child);
-			break;
-
-		/* Set the trap flag. */
-		case PTRACE_SINGLESTEP:
-			ret = -EIO;
-			
-			if (!valid_signal(data))
-				break;
-			
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-			/* TODO: set some clever breakpoint mechanism... */
-
-			child->exit_code = data;
-			wake_up_process(child);
-			ret = 0;
-			break;
-
 		/* Get all GP registers from the child. */
 		case PTRACE_GETREGS: {
 		  	int i;
diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c
index 1734b46..8f79163 100644
--- a/arch/cris/arch-v10/lib/old_checksum.c
+++ b/arch/cris/arch-v10/lib/old_checksum.c
@@ -77,7 +77,7 @@
 		sum += *buff++;
 
 	if (endMarker > buff)
-		sum += *(const u8 *)buff;	/* add extra byte seperately */
+		sum += *(const u8 *)buff;	/* add extra byte separately */
 
 	BITOFF;
 	return (__force __wsum)sum;
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 435b967..1f39861 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -615,7 +615,7 @@
 	.long sys_swapon
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c
index dd40147..f4ebd1e 100644
--- a/arch/cris/arch-v32/kernel/ptrace.c
+++ b/arch/cris/arch-v32/kernel/ptrace.c
@@ -78,6 +78,35 @@
 	return 0;
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	unsigned long tmp;
+
+	/*
+	 * Set up SPC if not set already (in which case we have no other
+	 * choice but to trust it).
+	 */
+	if (!get_reg(child, PT_SPC)) {
+		/* In case we're stopped in a delay slot. */
+		tmp = get_reg(child, PT_ERP) & ~1;
+		put_reg(child, PT_SPC, tmp);
+	}
+	tmp = get_reg(child, PT_CCS) | SBIT_USER;
+	put_reg(child, PT_CCS, tmp);
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	put_reg(child, PT_SPC, 0);
+
+	if (!get_debugreg(child->pid, PT_BP_CTRL)) {
+		unsigned long tmp;
+		/* If no h/w bp configured, disable S bit. */
+		tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
+		put_reg(child, PT_CCS, tmp);
+	}
+}
+
 /*
  * Called by kernel/ptrace.c when detaching.
  *
@@ -89,8 +118,7 @@
 	unsigned long tmp;
 
 	/* Deconfigure SPC and S-bit. */
-	tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
-	put_reg(child, PT_CCS, tmp);
+	user_disable_single_step(child);
 	put_reg(child, PT_SPC, 0);
 
 	/* Deconfigure any watchpoints associated with the child. */
@@ -169,83 +197,6 @@
 			ret = 0;
 			break;
 
-		case PTRACE_SYSCALL:
-		case PTRACE_CONT:
-			ret = -EIO;
-
-			if (!valid_signal(data))
-				break;
-
-			/* Continue means no single-step. */
-			put_reg(child, PT_SPC, 0);
-
-			if (!get_debugreg(child->pid, PT_BP_CTRL)) {
-				unsigned long tmp;
-				/* If no h/w bp configured, disable S bit. */
-				tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
-				put_reg(child, PT_CCS, tmp);
-			}
-
-			if (request == PTRACE_SYSCALL) {
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			}
-			else {
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			}
-
-			child->exit_code = data;
-
-			/* TODO: make sure any pending breakpoint is killed */
-			wake_up_process(child);
-			ret = 0;
-
-			break;
-
-		/* Make the child exit by sending it a sigkill. */
-		case PTRACE_KILL:
-			ret = 0;
-
-			if (child->exit_state == EXIT_ZOMBIE)
-				break;
-
-			child->exit_code = SIGKILL;
-
-			/* Deconfigure single-step and h/w bp. */
-			ptrace_disable(child);
-
-			/* TODO: make sure any pending breakpoint is killed */
-			wake_up_process(child);
-			break;
-
-		/* Set the trap flag. */
-		case PTRACE_SINGLESTEP:	{
-			unsigned long tmp;
-			ret = -EIO;
-
-			/* Set up SPC if not set already (in which case we have
-			   no other choice but to trust it). */
-			if (!get_reg(child, PT_SPC)) {
-				/* In case we're stopped in a delay slot. */
-				tmp = get_reg(child, PT_ERP) & ~1;
-				put_reg(child, PT_SPC, tmp);
-			}
-			tmp = get_reg(child, PT_CCS) | SBIT_USER;
-			put_reg(child, PT_CCS, tmp);
-
-			if (!valid_signal(data))
-				break;
-
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-			/* TODO: set some clever breakpoint mechanism... */
-
-			child->exit_code = data;
-			wake_up_process(child);
-			ret = 0;
-			break;
-
-		}
-
 		/* Get all GP registers from the child. */
 		case PTRACE_GETREGS: {
 			int i;
diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c
index 6779bcb..c030d02 100644
--- a/arch/cris/arch-v32/mm/tlb.c
+++ b/arch/cris/arch-v32/mm/tlb.c
@@ -189,7 +189,7 @@
 		spin_unlock(&mmu_context_lock);
 
 		/*
-		 * Remember the pgd for the fault handlers. Keep a seperate
+		 * Remember the pgd for the fault handlers. Keep a separate
 		 * copy of it because current and active_mm might be invalid
 		 * at points where * there's still a need to derefer the pgd.
 		 */
diff --git a/arch/cris/include/arch-v32/arch/ptrace.h b/arch/cris/include/arch-v32/arch/ptrace.h
index 41f4e86..ffca8d0 100644
--- a/arch/cris/include/arch-v32/arch/ptrace.h
+++ b/arch/cris/include/arch-v32/arch/ptrace.h
@@ -108,6 +108,7 @@
 
 #ifdef __KERNEL__
 
+#define arch_has_single_step() (1)
 #define user_mode(regs) (((regs)->ccs & (1 << (U_CCS_BITNR + CCS_SHIFT))) != 0)
 #define instruction_pointer(regs) ((regs)->erp)
 extern void show_regs(struct pt_regs *);
diff --git a/arch/cris/include/asm/pci.h b/arch/cris/include/asm/pci.h
index 730ce40..9f1cd56 100644
--- a/arch/cris/include/asm/pci.h
+++ b/arch/cris/include/asm/pci.h
@@ -44,14 +44,6 @@
  */
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			       enum pci_mmap_state mmap_state, int write_combine);
diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h
index c170793..f6fad83 100644
--- a/arch/cris/include/asm/unistd.h
+++ b/arch/cris/include/asm/unistd.h
@@ -352,6 +352,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -364,6 +365,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_MMAP
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c
index c2bbb1a..7aa036e 100644
--- a/arch/cris/kernel/sys_cris.c
+++ b/arch/cris/kernel/sys_cris.c
@@ -26,24 +26,6 @@
 #include <asm/uaccess.h>
 #include <asm/segment.h>
 
-asmlinkage unsigned long old_mmap(unsigned long __user *args)
-{        
-	unsigned long buffer[6];
-	int err = -EFAULT;
-
-	if (copy_from_user(&buffer, args, sizeof(buffer)))
-		goto out;
-
-	err = -EINVAL;
-	if (buffer[5] & ~PAGE_MASK) /* verify that offset is on page boundary */
-		goto out;
-
-	err = sys_mmap_pgoff(buffer[0], buffer[1], buffer[2], buffer[3],
-                       buffer[4], buffer[5] >> PAGE_SHIFT);
-out:
-	return err;
-}
-
 asmlinkage long
 sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
           unsigned long flags, unsigned long fd, unsigned long pgoff)
@@ -51,81 +33,3 @@
 	/* bug(?): 8Kb pages here */
         return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 }
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly. (same as arch/i386)
- */
-
-asmlinkage int sys_ipc (uint call, int first, int second,
-			int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
-					(const struct timespec __user *)fifth);
-
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf __user *) ptr, 
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-			
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr, 
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv (first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
-
-	case SHMAT: {
-                ulong raddr;
-                ret = do_shmat (first, (char __user *) ptr, second, &raddr);
-                if (ret)
-                        return ret;
-                return put_user (raddr, (ulong __user *) third);
-        }
-	case SHMDT: 
-		return sys_shmdt ((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
diff --git a/arch/frv/include/asm/dma-mapping.h b/arch/frv/include/asm/dma-mapping.h
index b289887..6af5d83 100644
--- a/arch/frv/include/asm/dma-mapping.h
+++ b/arch/frv/include/asm/dma-mapping.h
@@ -7,6 +7,11 @@
 #include <asm/scatterlist.h>
 #include <asm/io.h>
 
+/*
+ * See Documentation/DMA-API.txt for the description of how the
+ * following DMA API should work.
+ */
+
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
@@ -16,24 +21,9 @@
 void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp);
 void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle);
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single is performed.
- */
 extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 				 enum dma_data_direction direction);
 
-/*
- * Unmap a single streaming mode DMA translation.  The dma_addr and size
- * must match what was provided for in a previous pci_map_single call.  All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guarenteed to see
- * whatever the device wrote there.
- */
 static inline
 void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		      enum dma_data_direction direction)
@@ -41,30 +31,9 @@
 	BUG_ON(direction == DMA_NONE);
 }
 
-/*
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
 extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 		      enum dma_data_direction direction);
 
-/*
- * Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
 static inline
 void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 	     enum dma_data_direction direction)
diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h
index 8c7260a..0d59979 100644
--- a/arch/frv/include/asm/pci.h
+++ b/arch/frv/include/asm/pci.h
@@ -43,14 +43,6 @@
 /* Return the index of the PCI controller for device PDEV. */
 #define pci_controller_num(PDEV)	(0)
 
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/frv/include/asm/ptrace.h b/arch/frv/include/asm/ptrace.h
index a54b535..6bfad4c 100644
--- a/arch/frv/include/asm/ptrace.h
+++ b/arch/frv/include/asm/ptrace.h
@@ -84,8 +84,6 @@
 #define task_pt_regs(task) ((task)->thread.frame0)
 
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
 
 #endif /* !__ASSEMBLY__ */
 #endif /* __KERNEL__ */
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index be6ef0f..b28da49 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -354,6 +354,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 /* #define __ARCH_WANT_SYS_GETHOSTNAME */
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 /* #define __ARCH_WANT_SYS_SGETMASK */
 /* #define __ARCH_WANT_SYS_SIGNAL */
diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c
index 1d3d4c9..9c49808 100644
--- a/arch/frv/kernel/sys_frv.c
+++ b/arch/frv/kernel/sys_frv.c
@@ -42,92 +42,3 @@
 	return sys_mmap_pgoff(addr, len, prot, flags, fd,
 			      pgoff >> (PAGE_SHIFT - 12));
 }
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage long sys_ipc(unsigned long call,
-			unsigned long first,
-			unsigned long second,
-			unsigned long third,
-			void __user *ptr,
-			unsigned long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
-				      (const struct timespec __user *)fifth);
-
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf __user *) ptr,
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv (first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat (first, (char __user *) ptr, second, &raddr);
-			if (ret)
-				return ret;
-			return put_user (raddr, (ulong __user *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			/* The "(ulong *) third" is valid _only_ because of the kernel segment thing */
-			return do_shmat (first, (char __user *) ptr, second, (ulong *) third);
-		}
-	case SHMDT:
-		return sys_shmdt ((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 4e1ba0b..e47857f 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -106,13 +106,6 @@
 
 EXPORT_SYMBOL(dma_free_coherent);
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either dma_unmap_single or pci_dma_sync_single is performed.
- */
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
 {
@@ -125,22 +118,6 @@
 
 EXPORT_SYMBOL(dma_map_single);
 
-/*
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above dma_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
 int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	       enum dma_data_direction direction)
 {
@@ -157,13 +134,6 @@
 
 EXPORT_SYMBOL(dma_map_sg);
 
-/*
- * Map a single page of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
 dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
 			size_t size, enum dma_data_direction direction)
 {
diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c
index 45954f0..2c912e8 100644
--- a/arch/frv/mb93090-mb00/pci-dma.c
+++ b/arch/frv/mb93090-mb00/pci-dma.c
@@ -38,13 +38,6 @@
 
 EXPORT_SYMBOL(dma_free_coherent);
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single is performed.
- */
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
 {
@@ -57,22 +50,6 @@
 
 EXPORT_SYMBOL(dma_map_single);
 
-/*
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above dma_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
 int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	       enum dma_data_direction direction)
 {
@@ -103,13 +80,6 @@
 
 EXPORT_SYMBOL(dma_map_sg);
 
-/*
- * Map a single page of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
 dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
 			size_t size, enum dma_data_direction direction)
 {
diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
index 33e842f..c1a8df2 100644
--- a/arch/h8300/include/asm/io.h
+++ b/arch/h8300/include/asm/io.h
@@ -25,7 +25,7 @@
  * memory location directly.
  */
 /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
+ * two accesses to memory, which may be undesirable for some devices.
  */
 
 /*
diff --git a/arch/h8300/include/asm/ptrace.h b/arch/h8300/include/asm/ptrace.h
index c2e05e4..d866c0e 100644
--- a/arch/h8300/include/asm/ptrace.h
+++ b/arch/h8300/include/asm/ptrace.h
@@ -55,6 +55,8 @@
 /* Find the stack offset for a register, relative to thread.esp0. */
 #define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
 
+#define arch_has_single_step()	(1)
+
 #define user_mode(regs) (!((regs)->ccr & PS_S))
 #define instruction_pointer(regs) ((regs)->pc)
 #define profile_pc(regs) instruction_pointer(regs)
diff --git a/arch/h8300/include/asm/unistd.h b/arch/h8300/include/asm/unistd.h
index 99f3c35..50f2c5a3 100644
--- a/arch/h8300/include/asm/unistd.h
+++ b/arch/h8300/include/asm/unistd.h
@@ -336,6 +336,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -348,6 +349,8 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_MMAP
+#define __ARCH_WANT_SYS_OLD_SELECT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c
index d32bbf0..df11412 100644
--- a/arch/h8300/kernel/ptrace.c
+++ b/arch/h8300/kernel/ptrace.c
@@ -34,25 +34,20 @@
 /* cpu depend functions */
 extern long h8300_get_reg(struct task_struct *task, int regno);
 extern int  h8300_put_reg(struct task_struct *task, int regno, unsigned long data);
-extern void h8300_disable_trace(struct task_struct *child);
-extern void h8300_enable_trace(struct task_struct *child);
+
+
+void user_disable_single_step(struct task_struct *child)
+{
+}
 
 /*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
  */
 
-inline
-static int read_long(struct task_struct * tsk, unsigned long addr,
-	unsigned long * result)
-{
-	*result = *(unsigned long *)addr;
-	return 0;
-}
-
 void ptrace_disable(struct task_struct *child)
 {
-	h8300_disable_trace(child);
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -60,17 +55,6 @@
 	int ret;
 
 	switch (request) {
-		case PTRACE_PEEKTEXT: /* read word at location addr. */ 
-		case PTRACE_PEEKDATA: {
-			unsigned long tmp;
-
-			ret = read_long(child, addr, &tmp);
-			if (ret < 0)
-				break ;
-			ret = put_user(tmp, (unsigned long *) data);
-			break ;
-		}
-
 	/* read the word at location addr in the USER area. */
 		case PTRACE_PEEKUSR: {
 			unsigned long tmp = 0;
@@ -109,11 +93,6 @@
 		}
 
       /* when I and D space are separate, this will have to be fixed. */
-		case PTRACE_POKETEXT: /* write the word at location addr. */
-		case PTRACE_POKEDATA:
-			ret = generic_ptrace_pokedata(child, addr, data);
-			break;
-
 		case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
 			if ((addr & 3) || addr < 0 || addr >= sizeof(struct user)) {
 				ret = -EIO;
@@ -131,53 +110,6 @@
 			}
 			ret = -EIO;
 			break ;
-		case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-		case PTRACE_CONT: { /* restart after signal. */
-			ret = -EIO;
-			if (!valid_signal(data))
-				break ;
-			if (request == PTRACE_SYSCALL)
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			else
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			wake_up_process(child);
-			/* make sure the single step bit is not set. */
-			h8300_disable_trace(child);
-			ret = 0;
-		}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill. 
- * perhaps it should be put in the status that it wants to 
- * exit.
- */
-		case PTRACE_KILL: {
-
-			ret = 0;
-			if (child->exit_state == EXIT_ZOMBIE) /* already dead */
-				break;
-			child->exit_code = SIGKILL;
-			h8300_disable_trace(child);
-			wake_up_process(child);
-			break;
-		}
-
-		case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			h8300_enable_trace(child);
-			wake_up_process(child);
-			ret = 0;
-			break;
-		}
-
-		case PTRACE_DETACH:	/* detach a process that was attached. */
-			ret = ptrace_detach(child, data);
-			break;
 
 		case PTRACE_GETREGS: { /* Get all gp regs from the child. */
 		  	int i;
@@ -210,7 +142,7 @@
 		}
 
 		default:
-			ret = -EIO;
+			ret = ptrace_request(child, request, addr, data);
 			break;
 	}
 	return ret;
diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c
index b5969db..f9b3f44 100644
--- a/arch/h8300/kernel/sys_h8300.c
+++ b/arch/h8300/kernel/sys_h8300.c
@@ -26,144 +26,6 @@
 #include <asm/traps.h>
 #include <asm/unistd.h>
 
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
- * handle more than 4 system call parameters, so these system calls
- * used a memory block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct *arg)
-{
-	struct mmap_arg_struct a;
-	int error = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
-			       a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set *inp, *outp, *exp;
-	struct timeval *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc (uint call, int first, int second,
-			int third, void *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMCTL)
-		switch (call) {
-		case SEMOP:
-			return sys_semop (first, (struct sembuf *)ptr, second);
-		case SEMGET:
-			return sys_semget (first, second, third);
-		case SEMCTL: {
-			union semun fourth;
-			if (!ptr)
-				return -EINVAL;
-			if (get_user(fourth.__pad, (void **) ptr))
-				return -EFAULT;
-			return sys_semctl (first, second, third, fourth);
-			}
-		default:
-			return -EINVAL;
-		}
-	if (call <= MSGCTL) 
-		switch (call) {
-		case MSGSND:
-			return sys_msgsnd (first, (struct msgbuf *) ptr, 
-					  second, third);
-		case MSGRCV:
-			switch (version) {
-			case 0: {
-				struct ipc_kludge tmp;
-				if (!ptr)
-					return -EINVAL;
-				if (copy_from_user (&tmp,
-						    (struct ipc_kludge *)ptr,
-						    sizeof (tmp)))
-					return -EFAULT;
-				return sys_msgrcv (first, tmp.msgp, second,
-						   tmp.msgtyp, third);
-				}
-			default:
-				return sys_msgrcv (first,
-						   (struct msgbuf *) ptr,
-						   second, fifth, third);
-			}
-		case MSGGET:
-			return sys_msgget ((key_t) first, second);
-		case MSGCTL:
-			return sys_msgctl (first, second,
-					   (struct msqid_ds *) ptr);
-		default:
-			return -EINVAL;
-		}
-	if (call <= SHMCTL) 
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			default: {
-				ulong raddr;
-				ret = do_shmat (first, (char *) ptr,
-						 second, &raddr);
-				if (ret)
-					return ret;
-				return put_user (raddr, (ulong *) third);
-			}
-			}
-		case SHMDT: 
-			return sys_shmdt ((char *)ptr);
-		case SHMGET:
-			return sys_shmget (first, second, third);
-		case SHMCTL:
-			return sys_shmctl (first, second,
-					   (struct shmid_ds *) ptr);
-		default:
-			return -EINVAL;
-		}
-
-	return -EINVAL;
-}
-
 /* sys_cacheflush -- no support.  */
 asmlinkage int
 sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len)
diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S
index 2d69881..faefaff 100644
--- a/arch/h8300/kernel/syscalls.S
+++ b/arch/h8300/kernel/syscalls.S
@@ -96,7 +96,7 @@
 	.long SYMBOL_NAME(sys_settimeofday)
 	.long SYMBOL_NAME(sys_getgroups16)	/* 80 */
 	.long SYMBOL_NAME(sys_setgroups16)
-	.long SYMBOL_NAME(old_select)
+	.long SYMBOL_NAME(sys_old_select)
 	.long SYMBOL_NAME(sys_symlink)
 	.long SYMBOL_NAME(sys_lstat)
 	.long SYMBOL_NAME(sys_readlink)		/* 85 */
@@ -104,7 +104,7 @@
 	.long SYMBOL_NAME(sys_swapon)
 	.long SYMBOL_NAME(sys_reboot)
 	.long SYMBOL_NAME(sys_old_readdir)
-	.long SYMBOL_NAME(old_mmap)		/* 90 */
+	.long SYMBOL_NAME(sys_old_mmap)		/* 90 */
 	.long SYMBOL_NAME(sys_munmap)
 	.long SYMBOL_NAME(sys_truncate)
 	.long SYMBOL_NAME(sys_ftruncate)
diff --git a/arch/h8300/platform/h8300h/ptrace_h8300h.c b/arch/h8300/platform/h8300h/ptrace_h8300h.c
index 746b1ae..4f1ed02 100644
--- a/arch/h8300/platform/h8300h/ptrace_h8300h.c
+++ b/arch/h8300/platform/h8300h/ptrace_h8300h.c
@@ -60,7 +60,7 @@
 }
 
 /* disable singlestep */
-void h8300_disable_trace(struct task_struct *child)
+void user_disable_single_step(struct task_struct *child)
 {
 	if((long)child->thread.breakinfo.addr != -1L) {
 		*child->thread.breakinfo.addr = child->thread.breakinfo.inst;
@@ -264,7 +264,7 @@
 
 /* Set breakpoint(s) to simulate a single step from the current PC.  */
 
-void h8300_enable_trace(struct task_struct *child)
+void user_enable_single_step(struct task_struct *child)
 {
 	unsigned short *nextpc;
 	nextpc = getnextpc(child,(unsigned short *)h8300_get_reg(child, PT_PC));
@@ -276,7 +276,7 @@
 asmlinkage void trace_trap(unsigned long bp)
 {
 	if ((unsigned long)current->thread.breakinfo.addr == bp) {
-		h8300_disable_trace(current);
+		user_disable_single_step(current);
 		force_sig(SIGTRAP,current);
 	} else
 	        force_sig(SIGILL,current);
diff --git a/arch/h8300/platform/h8s/ptrace_h8s.c b/arch/h8300/platform/h8s/ptrace_h8s.c
index e8cd46f..c058ab1 100644
--- a/arch/h8300/platform/h8s/ptrace_h8s.c
+++ b/arch/h8300/platform/h8s/ptrace_h8s.c
@@ -65,13 +65,13 @@
 }
 
 /* disable singlestep */
-void h8300_disable_trace(struct task_struct *child)
+void user_disable_single_step(struct task_struct *child)
 {
 	*(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) &= ~EXR_TRACE;
 }
 
 /* enable singlestep */
-void h8300_enable_trace(struct task_struct *child)
+void user_enable_single_step(struct task_struct *child)
 {
 	*(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) |= EXR_TRACE;
 }
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 9a50d7d..4d4f418 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -53,6 +53,9 @@
 	bool
 	default y
 
+config NEED_DMA_MAP_STATE
+	def_bool y
+
 config SWIOTLB
        bool
 
diff --git a/arch/ia64/include/asm/compat.h b/arch/ia64/include/asm/compat.h
index dfcf75b..f90edc8 100644
--- a/arch/ia64/include/asm/compat.h
+++ b/arch/ia64/include/asm/compat.h
@@ -5,7 +5,8 @@
  */
 #include <linux/types.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"i686\0\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
index 55281aa..73b5f78 100644
--- a/arch/ia64/include/asm/pci.h
+++ b/arch/ia64/include/asm/pci.h
@@ -56,20 +56,6 @@
 
 #include <asm-generic/pci-dma-compat.h>
 
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h
index 14055c6..7ae9c3f 100644
--- a/arch/ia64/include/asm/ptrace.h
+++ b/arch/ia64/include/asm/ptrace.h
@@ -319,11 +319,7 @@
 	ptrace_attach_sync_user_rbs(child)
 
   #define arch_has_single_step()  (1)
-  extern void user_enable_single_step(struct task_struct *);
-  extern void user_disable_single_step(struct task_struct *);
-
   #define arch_has_block_step()   (1)
-  extern void user_enable_block_step(struct task_struct *);
 
 #endif /* !__KERNEL__ */
 
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index a7ca07f..f1c9f70 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -44,6 +44,7 @@
 #include <linux/efi.h>
 #include <linux/mmzone.h>
 #include <linux/nodemask.h>
+#include <acpi/processor.h>
 #include <asm/io.h>
 #include <asm/iosapic.h>
 #include <asm/machvec.h>
@@ -907,6 +908,8 @@
 	cpu_set(cpu, cpu_present_map);
 	ia64_cpu_to_sapicid[cpu] = physid;
 
+	acpi_processor_set_pdc(handle);
+
 	*pcpu = cpu;
 	return (0);
 }
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 8f06035..b3a5818 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -282,7 +282,7 @@
 	return ret;
 }
 
-static struct sysfs_ops cache_sysfs_ops = {
+static const struct sysfs_ops cache_sysfs_ops = {
 	.show   = cache_show
 };
 
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index e456f06..d00dfc1 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -241,7 +241,7 @@
  * Note:  This stuff is duped here because Altix requires the PCDP to
  * locate a usable VGA device due to lack of proper ACPI support.  Structures
  * could be used from drivers/firmware/pcdp.h, but it was decided that moving
- * this file to a more public location just for Altix use was undesireable.
+ * this file to a more public location just for Altix use was undesirable.
  */
 
 struct hcdp_uart_desc {
diff --git a/arch/m32r/include/asm/ptrace.h b/arch/m32r/include/asm/ptrace.h
index a0755b9..840a123 100644
--- a/arch/m32r/include/asm/ptrace.h
+++ b/arch/m32r/include/asm/ptrace.h
@@ -120,6 +120,8 @@
 
 #include <asm/m32r.h>		/* M32R_PSW_BSM, M32R_PSW_BPM */
 
+#define arch_has_single_step() (1)
+
 struct task_struct;
 extern void init_debug_traps(struct task_struct *);
 #define arch_ptrace_attach(child) \
diff --git a/arch/m32r/include/asm/unistd.h b/arch/m32r/include/asm/unistd.h
index cf701c9..7612577 100644
--- a/arch/m32r/include/asm/unistd.h
+++ b/arch/m32r/include/asm/unistd.h
@@ -339,6 +339,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_TIME
 #define __ARCH_WANT_SYS_UTIME
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index 98682bb..e555091 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -580,6 +580,35 @@
 	}
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	unsigned long next_pc;
+	unsigned long pc, insn;
+
+	clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+	/* Compute next pc.  */
+	pc = get_stack_long(child, PT_BPC);
+
+	if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
+	    != sizeof(insn))
+		break;
+
+	compute_next_pc(insn, pc, &next_pc, child);
+	if (next_pc & 0x80000000)
+		break;
+
+	if (embed_debug_trap(child, next_pc))
+		break;
+
+	invalidate_cache();
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	unregister_all_debug_traps(child);
+	invalidate_cache();
+}
 
 /*
  * Called by kernel/ptrace.c when detaching..
@@ -630,74 +659,6 @@
 		ret = ptrace_write_user(child, addr, data);
 		break;
 
-	/*
-	 * continue/restart and stop at next (return from) syscall
-	 */
-	case PTRACE_SYSCALL:
-	case PTRACE_CONT:
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL: {
-		ret = 0;
-		unregister_all_debug_traps(child);
-		invalidate_cache();
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	/*
-	 * execute single instruction.
-	 */
-	case PTRACE_SINGLESTEP: {
-		unsigned long next_pc;
-		unsigned long pc, insn;
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		/* Compute next pc.  */
-		pc = get_stack_long(child, PT_BPC);
-
-		if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
-		    != sizeof(insn))
-			break;
-
-		compute_next_pc(insn, pc, &next_pc, child);
-		if (next_pc & 0x80000000)
-			break;
-
-		if (embed_debug_trap(child, next_pc))
-			break;
-
-		invalidate_cache();
-		child->exit_code = data;
-
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 	case PTRACE_GETREGS:
 		ret = ptrace_getregs(child, (void __user *)data);
 		break;
diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c
index d3c865c..0a00f46 100644
--- a/arch/m32r/kernel/sys_m32r.c
+++ b/arch/m32r/kernel/sys_m32r.c
@@ -76,98 +76,6 @@
 	return oldval;
 }
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc(uint call, int first, int second,
-		       int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second, (const struct timespec __user *)fifth);
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-		}
-
-	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf __user *) ptr,
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-			}
-		default:
-			return sys_msgrcv (first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl (first, second,
-				   (struct msqid_ds __user *) ptr);
-	case SHMAT: {
-		ulong raddr;
-
-		if (!access_ok(VERIFY_WRITE, (ulong __user *) third,
-				      sizeof(ulong)))
-			return -EFAULT;
-		ret = do_shmat (first, (char __user *) ptr, second, &raddr);
-		if (ret)
-			return ret;
-		return put_user (raddr, (ulong __user *) third);
-		}
-	case SHMDT:
-		return sys_shmdt ((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-
-asmlinkage int sys_uname(struct old_utsname __user * name)
-{
-	int err;
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
-	up_read(&uts_sem);
-	return err?-EFAULT:0;
-}
-
 asmlinkage int sys_cacheflush(void *addr, int bytes, int cache)
 {
 	/* This should flush more selectively ...  */
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index 4add96d..5890897 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -121,7 +121,7 @@
  * bytes have been lost and in which state of the packet structure we are now.
  * This usually causes keyboards bytes to be interpreted as mouse movements
  * and vice versa, which is very annoying. It seems better to throw away some
- * bytes (that are usually mouse bytes) than to misinterpret them. Therefor I
+ * bytes (that are usually mouse bytes) than to misinterpret them. Therefore I
  * introduced the RESYNC state for IKBD data. In this state, the bytes up to
  * one that really looks like a key event (0x04..0xf2) or the start of a mouse
  * packet (0xf8..0xfb) are thrown away, but at most 2 bytes. This at least
diff --git a/arch/m68k/include/asm/fbio.h b/arch/m68k/include/asm/fbio.h
index b9215a0..0a21da8 100644
--- a/arch/m68k/include/asm/fbio.h
+++ b/arch/m68k/include/asm/fbio.h
@@ -173,7 +173,7 @@
 	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
         int     mdi_type;       /* FBTYPE name */
         int     mdi_height;     /* height */
-        int     mdi_width;      /* widht */
+        int     mdi_width;      /* width */
         int     mdi_size;       /* available ram */
         int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
         int     mdi_pixfreq;    /* pixel clock (from PROM) */
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 359065d5..6e2413e 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -16,7 +16,7 @@
  * memory location directly.
  */
 /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
+ * two accesses to memory, which may be undesirable for some devices.
  */
 
 /*
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index 21605c7..6e6e3ac 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -87,18 +87,10 @@
 #define profile_pc(regs) instruction_pointer(regs)
 extern void show_regs(struct pt_regs *);
 
-/*
- * These are defined as per linux/ptrace.h.
- */
-struct task_struct;
-
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
 
 #ifdef CONFIG_MMU
 #define arch_has_block_step()	(1)
-extern void user_enable_block_step(struct task_struct *);
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index d72a71d..60b15d0 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -351,6 +351,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -363,6 +364,8 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_MMAP
+#define __ARCH_WANT_SYS_OLD_SELECT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index e136b8c..2391bdf 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -510,7 +510,7 @@
 	.long sys_settimeofday
 	.long sys_getgroups16	/* 80 */
 	.long sys_setgroups16
-	.long old_select
+	.long sys_old_select
 	.long sys_symlink
 	.long sys_lstat
 	.long sys_readlink	/* 85 */
@@ -518,7 +518,7 @@
 	.long sys_swapon
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c
index e3ad2d6..7789669 100644
--- a/arch/m68k/kernel/sys_m68k.c
+++ b/arch/m68k/kernel/sys_m68k.c
@@ -46,137 +46,6 @@
 	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 }
 
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
- * handle more than 4 system call parameters, so these system calls
- * used a memory block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
-{
-	struct mmap_arg_struct a;
-	int error = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
-			       a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set __user *inp, *outp, *exp;
-	struct timeval __user *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc (uint call, int first, int second,
-			int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMCTL)
-		switch (call) {
-		case SEMOP:
-			return sys_semop (first, ptr, second);
-		case SEMGET:
-			return sys_semget (first, second, third);
-		case SEMCTL: {
-			union semun fourth;
-			if (!ptr)
-				return -EINVAL;
-			if (get_user(fourth.__pad, (void __user *__user *) ptr))
-				return -EFAULT;
-			return sys_semctl (first, second, third, fourth);
-			}
-		default:
-			return -ENOSYS;
-		}
-	if (call <= MSGCTL)
-		switch (call) {
-		case MSGSND:
-			return sys_msgsnd (first, ptr, second, third);
-		case MSGRCV:
-			switch (version) {
-			case 0: {
-				struct ipc_kludge tmp;
-				if (!ptr)
-					return -EINVAL;
-				if (copy_from_user (&tmp, ptr, sizeof (tmp)))
-					return -EFAULT;
-				return sys_msgrcv (first, tmp.msgp, second,
-						   tmp.msgtyp, third);
-				}
-			default:
-				return sys_msgrcv (first, ptr,
-						   second, fifth, third);
-			}
-		case MSGGET:
-			return sys_msgget ((key_t) first, second);
-		case MSGCTL:
-			return sys_msgctl (first, second, ptr);
-		default:
-			return -ENOSYS;
-		}
-	if (call <= SHMCTL)
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			default: {
-				ulong raddr;
-				ret = do_shmat (first, ptr, second, &raddr);
-				if (ret)
-					return ret;
-				return put_user (raddr, (ulong __user *) third);
-			}
-			}
-		case SHMDT:
-			return sys_shmdt (ptr);
-		case SHMGET:
-			return sys_shmget (first, second, third);
-		case SHMCTL:
-			return sys_shmctl (first, second, ptr);
-		default:
-			return -ENOSYS;
-		}
-
-	return -EINVAL;
-}
-
 /* Convert virtual (user) address VADDR to physical address PADDR */
 #define virt_to_phys_040(vaddr)						\
 ({									\
diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c
index 85ed2f9..f6be124 100644
--- a/arch/m68knommu/kernel/ptrace.c
+++ b/arch/m68knommu/kernel/ptrace.c
@@ -116,12 +116,6 @@
 	int ret;
 
 	switch (request) {
-		/* when I and D space are separate, these will need to be fixed. */
-		case PTRACE_PEEKTEXT: /* read word at location addr. */ 
-		case PTRACE_PEEKDATA:
-			ret = generic_ptrace_peekdata(child, addr, data);
-			break;
-
 		/* read the word at location addr in the USER area. */
 		case PTRACE_PEEKUSR: {
 			unsigned long tmp;
@@ -160,12 +154,6 @@
 			break;
 		}
 
-		/* when I and D space are separate, this will have to be fixed. */
-		case PTRACE_POKETEXT: /* write the word at location addr. */
-		case PTRACE_POKEDATA:
-			ret = generic_ptrace_pokedata(child, addr, data);
-			break;
-
 		case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
 			ret = -EIO;
 			if ((addr & 3) || addr < 0 ||
@@ -202,66 +190,6 @@
 			}
 			break;
 
-		case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-		case PTRACE_CONT: { /* restart after signal. */
-			long tmp;
-
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			if (request == PTRACE_SYSCALL)
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			else
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			/* make sure the single step bit is not set. */
-			tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
-			put_reg(child, PT_SR, tmp);
-			wake_up_process(child);
-			ret = 0;
-			break;
-		}
-
-		/*
-		 * make the child exit.  Best I can do is send it a sigkill. 
-		 * perhaps it should be put in the status that it wants to 
-		 * exit.
-		 */
-		case PTRACE_KILL: {
-			long tmp;
-
-			ret = 0;
-			if (child->exit_state == EXIT_ZOMBIE) /* already dead */
-				break;
-			child->exit_code = SIGKILL;
-			/* make sure the single step bit is not set. */
-			tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
-			put_reg(child, PT_SR, tmp);
-			wake_up_process(child);
-			break;
-		}
-
-		case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-			long tmp;
-
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16);
-			put_reg(child, PT_SR, tmp);
-
-			child->exit_code = data;
-			/* give it a chance to run. */
-			wake_up_process(child);
-			ret = 0;
-			break;
-		}
-
-		case PTRACE_DETACH:	/* detach a process that was attached. */
-			ret = ptrace_detach(child, data);
-			break;
-
 		case PTRACE_GETREGS: { /* Get all gp regs from the child. */
 		  	int i;
 			unsigned long tmp;
@@ -325,7 +253,7 @@
 		break;
 
 		default:
-			ret = -EIO;
+			ret = ptrace_request(child, request, addr, data);
 			break;
 	}
 	return ret;
diff --git a/arch/m68knommu/kernel/sys_m68k.c b/arch/m68knommu/kernel/sys_m68k.c
index 923dd4a..d65e9c4 100644
--- a/arch/m68knommu/kernel/sys_m68k.c
+++ b/arch/m68knommu/kernel/sys_m68k.c
@@ -27,142 +27,6 @@
 #include <asm/cacheflush.h>
 #include <asm/unistd.h>
 
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
- * handle more than 4 system call parameters, so these system calls
- * used a memory block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct *arg)
-{
-	struct mmap_arg_struct a;
-	int error = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
-				a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set *inp, *outp, *exp;
-	struct timeval *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc (uint call, int first, int second,
-			int third, void *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMCTL)
-		switch (call) {
-		case SEMOP:
-			return sys_semop (first, (struct sembuf *)ptr, second);
-		case SEMGET:
-			return sys_semget (first, second, third);
-		case SEMCTL: {
-			union semun fourth;
-			if (!ptr)
-				return -EINVAL;
-			if (get_user(fourth.__pad, (void **) ptr))
-				return -EFAULT;
-			return sys_semctl (first, second, third, fourth);
-			}
-		default:
-			return -EINVAL;
-		}
-	if (call <= MSGCTL) 
-		switch (call) {
-		case MSGSND:
-			return sys_msgsnd (first, (struct msgbuf *) ptr, 
-					  second, third);
-		case MSGRCV:
-			switch (version) {
-			case 0: {
-				struct ipc_kludge tmp;
-				if (!ptr)
-					return -EINVAL;
-				if (copy_from_user (&tmp,
-						    (struct ipc_kludge *)ptr,
-						    sizeof (tmp)))
-					return -EFAULT;
-				return sys_msgrcv (first, tmp.msgp, second,
-						   tmp.msgtyp, third);
-				}
-			default:
-				return sys_msgrcv (first,
-						   (struct msgbuf *) ptr,
-						   second, fifth, third);
-			}
-		case MSGGET:
-			return sys_msgget ((key_t) first, second);
-		case MSGCTL:
-			return sys_msgctl (first, second,
-					   (struct msqid_ds *) ptr);
-		default:
-			return -EINVAL;
-		}
-	if (call <= SHMCTL)
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			default: {
-				ulong raddr;
-				ret = do_shmat (first, ptr, second, &raddr);
-				if (ret)
-					return ret;
-				return put_user (raddr, (ulong __user *) third);
-			}
-			}
-		case SHMDT:
-			return sys_shmdt (ptr);
-		case SHMGET:
-			return sys_shmget (first, second, third);
-		case SHMCTL:
-			return sys_shmctl (first, second, ptr);
-		default:
-			return -ENOSYS;
-		}
-
-	return -EINVAL;
-}
-
 /* sys_cacheflush -- flush (part of) the processor cache.  */
 asmlinkage int
 sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len)
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index 56dd01d..b30b3eb 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -100,7 +100,7 @@
 	.long sys_settimeofday
 	.long sys_getgroups16	/* 80 */
 	.long sys_setgroups16
-	.long old_select
+	.long sys_old_select
 	.long sys_symlink
 	.long sys_lstat
 	.long sys_readlink	/* 85 */
@@ -108,7 +108,7 @@
 	.long sys_ni_syscall	/* sys_swapon */
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
index 4b3ac32..6d6349a 100644
--- a/arch/microblaze/kernel/ptrace.c
+++ b/arch/microblaze/kernel/ptrace.c
@@ -78,26 +78,6 @@
 	unsigned long copied;
 
 	switch (request) {
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		pr_debug("PEEKTEXT/PEEKDATA at %08lX\n", addr);
-		copied = access_process_vm(child, addr, &val, sizeof(val), 0);
-		rval = -EIO;
-		if (copied != sizeof(val))
-			break;
-		rval = put_user(val, (unsigned long *)data);
-		break;
-
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		pr_debug("POKETEXT/POKEDATA to %08lX\n", addr);
-		rval = 0;
-		if (access_process_vm(child, addr, &data, sizeof(data), 1)
-		    == sizeof(data))
-			break;
-		rval = -EIO;
-		break;
-
 	/* Read/write the word at location ADDR in the registers. */
 	case PTRACE_PEEKUSR:
 	case PTRACE_POKEUSR:
@@ -130,50 +110,8 @@
 		if (rval == 0 && request == PTRACE_PEEKUSR)
 			rval = put_user(val, (unsigned long *)data);
 		break;
-	/* Continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-		pr_debug("PTRACE_SYSCALL\n");
-	case PTRACE_SINGLESTEP:
-		pr_debug("PTRACE_SINGLESTEP\n");
-	/* Restart after a signal.  */
-	case PTRACE_CONT:
-		pr_debug("PTRACE_CONT\n");
-		rval = -EIO;
-		if (!valid_signal(data))
-			break;
-
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		child->exit_code = data;
-		pr_debug("wakeup_process\n");
-		wake_up_process(child);
-		rval = 0;
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		pr_debug("PTRACE_KILL\n");
-		rval = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
-	case PTRACE_DETACH: /* detach a process that was attached. */
-		pr_debug("PTRACE_DETACH\n");
-		rval = ptrace_detach(child, data);
-		break;
 	default:
-		/* rval = ptrace_request(child, request, addr, data); noMMU */
-		rval = -EIO;
+		rval = ptrace_request(child, request, addr, data);
 	}
 	return rval;
 }
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 591ca0c..29e8692 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -812,9 +812,9 @@
 
 config DMA_NONCOHERENT
 	bool
-	select DMA_NEED_PCI_MAP_STATE
+	select NEED_DMA_MAP_STATE
 
-config DMA_NEED_PCI_MAP_STATE
+config NEED_DMA_MAP_STATE
 	bool
 
 config SYS_HAS_EARLY_PRINTK
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index f58aed3..613f691 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -8,7 +8,8 @@
 #include <asm/page.h>
 #include <asm/ptrace.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"mips\0\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 5ebf825..3beea14 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -102,28 +102,6 @@
  */
 extern unsigned int PCI_DMA_BUS_IS_PHYS;
 
-#ifdef CONFIG_DMA_NEED_PCI_MAP_STATE
-
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
-
-#else /* CONFIG_DMA_NEED_PCI_MAP_STATE  */
-
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
-#endif /* CONFIG_DMA_NEED_PCI_MAP_STATE  */
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 65c679e..1b5a664 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -1004,6 +1004,7 @@
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_UTIME
@@ -1013,6 +1014,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index bde79ef..a39d059 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -249,22 +249,6 @@
 }
 #endif
 
-SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name)
-{
-	int ret = 0;
-
-	down_read(&uts_sem);
-	if (copy_to_user(name, utsname(), sizeof *name))
-		ret = -EFAULT;
-	up_read(&uts_sem);
-
-	if (current->personality == PER_LINUX32 && !ret)
-		if (copy_to_user(name->machine, "mips\0\0\0", 8))
-			ret = -EFAULT;
-
-	return ret;
-}
-
 SYSCALL_DEFINE1(32_personality, unsigned long, personality)
 {
 	int ret;
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 054861c..c51b95f 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -493,36 +493,6 @@
 		ret = ptrace_setfpregs(child, (__u32 __user *) data);
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL) {
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		}
-		else {
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		}
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
 	case PTRACE_GET_THREAD_AREA:
 		ret = put_user(task_thread_info(child)->tp_value,
 				(unsigned long __user *) data);
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 66b5a48..44337ba 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -181,7 +181,7 @@
 	PTR	sys_exit
 	PTR	compat_sys_wait4
 	PTR	sys_kill			/* 6060 */
-	PTR	sys_32_newuname
+	PTR	sys_newuname
 	PTR	sys_semget
 	PTR	sys_semop
 	PTR	sys_n32_semctl
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 515f9ea..813689e 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -325,7 +325,7 @@
 	PTR	sys32_sigreturn
 	PTR	sys32_clone			/* 4120 */
 	PTR	sys_setdomainname
-	PTR	sys_32_newuname
+	PTR	sys_newuname
 	PTR	sys_ni_syscall			/* sys_modify_ldt */
 	PTR	compat_sys_adjtimex
 	PTR	sys_mprotect			/* 4125 */
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 3f7f466..e96b1c3 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -215,48 +215,6 @@
 	return error;
 }
 
-/*
- * Compacrapability ...
- */
-SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
-{
-	if (name && !copy_to_user(name, utsname(), sizeof (*name)))
-		return 0;
-	return -EFAULT;
-}
-
-/*
- * Compacrapability ...
- */
-SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
-{
-	int error;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
-		return -EFAULT;
-
-	error = __copy_to_user(&name->sysname, &utsname()->sysname,
-			       __OLD_UTS_LEN);
-	error -= __put_user(0, name->sysname + __OLD_UTS_LEN);
-	error -= __copy_to_user(&name->nodename, &utsname()->nodename,
-				__OLD_UTS_LEN);
-	error -= __put_user(0, name->nodename + __OLD_UTS_LEN);
-	error -= __copy_to_user(&name->release, &utsname()->release,
-				__OLD_UTS_LEN);
-	error -= __put_user(0, name->release + __OLD_UTS_LEN);
-	error -= __copy_to_user(&name->version, &utsname()->version,
-				__OLD_UTS_LEN);
-	error -= __put_user(0, name->version + __OLD_UTS_LEN);
-	error -= __copy_to_user(&name->machine, &utsname()->machine,
-				__OLD_UTS_LEN);
-	error = __put_user(0, name->machine + __OLD_UTS_LEN);
-	error = error ? -EFAULT : 0;
-
-	return error;
-}
-
 SYSCALL_DEFINE1(set_thread_area, unsigned long, addr)
 {
 	struct thread_info *ti = task_thread_info(current);
@@ -407,94 +365,6 @@
 }
 
 /*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second,
-	unsigned long, third, void __user *, ptr, long, fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-		                      second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second,
-				      (const struct timespec __user *)fifth);
-	case SEMGET:
-		return sys_semget(first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user *__user *) ptr))
-			return -EFAULT;
-		return sys_semctl(first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd(first, (struct msgbuf __user *) ptr,
-				  second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof(tmp)))
-				return -EFAULT;
-			return sys_msgrcv(first, tmp.msgp, second,
-					  tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv(first,
-					  (struct msgbuf __user *) ptr,
-					  second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl(first, second,
-				  (struct msqid_ds __user *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			unsigned long raddr;
-			ret = do_shmat(first, (char __user *) ptr, second,
-				       &raddr);
-			if (ret)
-				return ret;
-			return put_user(raddr, (unsigned long __user *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			return do_shmat(first, (char __user *) ptr, second,
-				        (unsigned long *) third);
-		}
-	case SHMDT:
-		return sys_shmdt((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget(first, second, third);
-	case SHMCTL:
-		return sys_shmctl(first, second,
-				  (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-
-/*
  * No implemented yet ...
  */
 SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op)
diff --git a/arch/mips/txx9/generic/7segled.c b/arch/mips/txx9/generic/7segled.c
index 727ab21..7f8416f 100644
--- a/arch/mips/txx9/generic/7segled.c
+++ b/arch/mips/txx9/generic/7segled.c
@@ -58,13 +58,16 @@
 static SYSDEV_ATTR(ascii, 0200, NULL, ascii_store);
 static SYSDEV_ATTR(raw, 0200, NULL, raw_store);
 
-static ssize_t map_seg7_show(struct sysdev_class *class, char *buf)
+static ssize_t map_seg7_show(struct sysdev_class *class,
+			     struct sysdev_class_attribute *attr,
+			     char *buf)
 {
 	memcpy(buf, &txx9_seg7map, sizeof(txx9_seg7map));
 	return sizeof(txx9_seg7map);
 }
 
 static ssize_t map_seg7_store(struct sysdev_class *class,
+			      struct sysdev_class_attribute *attr,
 			      const char *buf, size_t size)
 {
 	if (size != sizeof(txx9_seg7map))
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 7174d83..95184a0 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -956,6 +956,7 @@
 	if (!dev->base)
 		goto exit;
 	dev->dev.cls = &txx9_sramc_sysdev_class;
+	sysfs_bin_attr_init(&dev->bindata_attr);
 	dev->bindata_attr.attr.name = "bindata";
 	dev->bindata_attr.attr.mode = S_IRUSR | S_IWUSR;
 	dev->bindata_attr.read = txx9_sram_read;
diff --git a/arch/mn10300/include/asm/dma-mapping.h b/arch/mn10300/include/asm/dma-mapping.h
index ccae8f6..4ed1522 100644
--- a/arch/mn10300/include/asm/dma-mapping.h
+++ b/arch/mn10300/include/asm/dma-mapping.h
@@ -17,6 +17,11 @@
 #include <asm/cache.h>
 #include <asm/io.h>
 
+/*
+ * See Documentation/DMA-API.txt for the description of how the
+ * following DMA API should work.
+ */
+
 extern void *dma_alloc_coherent(struct device *dev, size_t size,
 				dma_addr_t *dma_handle, int flag);
 
@@ -26,13 +31,6 @@
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
 #define dma_free_noncoherent(d, s, v, h)  dma_free_coherent((d), (s), (v), (h))
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.  The
- * 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory until
- * either pci_unmap_single or pci_dma_sync_single is performed.
- */
 static inline
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
@@ -42,14 +40,6 @@
 	return virt_to_bus(ptr);
 }
 
-/*
- * Unmap a single streaming mode DMA translation.  The dma_addr and size must
- * match what was provided for in a previous pci_map_single call.  All other
- * usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guarenteed to see
- * whatever the device wrote there.
- */
 static inline
 void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		      enum dma_data_direction direction)
@@ -57,20 +47,6 @@
 	BUG_ON(direction == DMA_NONE);
 }
 
-/*
- * Map a set of buffers described by scatterlist in streaming mode for DMA.
- * This is the scather-gather version of the above pci_map_single interface.
- * Here the scatter gather list elements are each tagged with the appropriate
- * dma address and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of DMA
- *       address/length pairs than there are SG table elements.  (for example
- *       via virtual mapping capabilities) The routine returns the number of
- *       addr/length pairs actually used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are the same
- * here.
- */
 static inline
 int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
 	       enum dma_data_direction direction)
@@ -91,11 +67,6 @@
 	return nents;
 }
 
-/*
- * Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
 static inline
 void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 		  enum dma_data_direction direction)
@@ -103,10 +74,6 @@
 	BUG_ON(!valid_dma_direction(direction));
 }
 
-/*
- * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical
- * to pci_map_single, but takes a struct page instead of a virtual address
- */
 static inline
 dma_addr_t dma_map_page(struct device *dev, struct page *page,
 			unsigned long offset, size_t size,
@@ -123,15 +90,6 @@
 	BUG_ON(direction == DMA_NONE);
 }
 
-/*
- * Make physical memory consistent for a single streaming mode DMA translation
- * after a transfer.
- *
- * If you perform a pci_map_single() but wish to interrogate the buffer using
- * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this
- * function before doing so.  At the next point you give the PCI dma address
- * back to the card, the device again owns the buffer.
- */
 static inline
 void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
 			     size_t size, enum dma_data_direction direction)
@@ -161,13 +119,6 @@
 }
 
 
-/*
- * Make physical memory consistent for a set of streaming mode DMA translations
- * after a transfer.
- *
- * The same as pci_dma_sync_single but for a scatter-gather list, same rules
- * and usage.
- */
 static inline
 void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 			 int nelems, enum dma_data_direction direction)
@@ -187,12 +138,6 @@
 	return 0;
 }
 
-/*
- * Return whether the given PCI device DMA address mask can be supported
- * properly.  For example, if your device can only drive the low 24-bits during
- * PCI bus mastering, then you would pass 0x00ffffff as the mask to this
- * function.
- */
 static inline
 int dma_supported(struct device *dev, u64 mask)
 {
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
index 1b0ba5e..7c2e911 100644
--- a/arch/mn10300/include/asm/ptrace.h
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -99,8 +99,6 @@
 extern void show_regs(struct pt_regs *);
 
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
 
 #endif  /*  !__ASSEMBLY  */
 
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index c05acb9..9d056f5 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -363,6 +363,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -375,6 +376,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_SELECT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 88e3e1c..d9ed5a1 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -468,7 +468,7 @@
 	.long sys_settimeofday
 	.long sys_getgroups16	/* 80 */
 	.long sys_setgroups16
-	.long old_select
+	.long sys_old_select
 	.long sys_symlink
 	.long sys_lstat
 	.long sys_readlink	/* 85 */
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index 17cc6ce..815f135 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -31,109 +31,3 @@
 		return -EINVAL;
 	return sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
 }
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set *inp;
-	fd_set *outp;
-	fd_set *exp;
-	struct timeval *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage long sys_ipc(uint call, int first, int second,
-			int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second,
-				      (const struct timespec __user *)fifth);
-	case SEMGET:
-		return sys_semget(first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl(first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd(first, (struct msgbuf __user *) ptr,
-				  second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof(tmp)))
-				return -EFAULT;
-			return sys_msgrcv(first, tmp.msgp, second,
-					  tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv(first,
-					  (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl(first, second,
-				   (struct msqid_ds __user *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat(first, (char __user *) ptr, second,
-				       &raddr);
-			if (ret)
-				return ret;
-			return put_user(raddr, (ulong *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			return do_shmat(first, (char __user *) ptr, second,
-					(ulong *) third);
-		}
-	case SHMDT:
-		return sys_shmdt((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget(first, second, third);
-	case SHMCTL:
-		return sys_shmctl(first, second,
-				  (struct shmid_ds __user *) ptr);
-	default:
-		return -EINVAL;
-	}
-}
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index f388dc6..9c4da3d 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -95,6 +95,9 @@
 config STACKTRACE_SUPPORT
 	def_bool y
 
+config NEED_DMA_MAP_STATE
+	def_bool y
+
 config ISA_DMA_API
 	bool
 
diff --git a/arch/parisc/include/asm/compat.h b/arch/parisc/include/asm/compat.h
index 7f32611..02b77ba 100644
--- a/arch/parisc/include/asm/compat.h
+++ b/arch/parisc/include/asm/compat.h
@@ -7,7 +7,8 @@
 #include <linux/sched.h>
 #include <linux/thread_info.h>
 
-#define COMPAT_USER_HZ 100
+#define COMPAT_USER_HZ 		100
+#define COMPAT_UTS_MACHINE	"parisc\0\0"
 
 typedef u32	compat_size_t;
 typedef s32	compat_ssize_t;
diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h
index 64c7aa5..2242a5c 100644
--- a/arch/parisc/include/asm/pci.h
+++ b/arch/parisc/include/asm/pci.h
@@ -183,20 +183,6 @@
 	void (*fixup_bus)(struct pci_bus *bus);
 };
 
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
 /*
 ** Stuff declared in arch/parisc/kernel/pci.c
 */
diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h
index aead40b..7f09533 100644
--- a/arch/parisc/include/asm/ptrace.h
+++ b/arch/parisc/include/asm/ptrace.h
@@ -47,13 +47,8 @@
 
 #define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
 
-struct task_struct;
 #define arch_has_single_step()	1
-void user_disable_single_step(struct task_struct *task);
-void user_enable_single_step(struct task_struct *task);
-
 #define arch_has_block_step()	1
-void user_enable_block_step(struct task_struct *task);
 
 /* XXX should we use iaoq[1] or iaoq[0] ? */
 #define user_mode(regs)			(((regs)->iaoq[0] & 3) ? 1 : 0)
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index 9147391..c9b9322 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -234,18 +234,3 @@
 
 	return err;
 }
-
-long parisc_newuname(struct new_utsname __user *name)
-{
-	int err = sys_newuname(name);
-
-#ifdef CONFIG_COMPAT
-	if (!err && personality(current->personality) == PER_LINUX32) {
-		if (__put_user(0, name->machine + 6) ||
-		    __put_user(0, name->machine + 7))
-			err = -EFAULT;
-	}
-#endif
-
-	return err;
-}
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index de5f6da..3d52c97 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -127,7 +127,7 @@
 	ENTRY_SAME(socketpair)
 	ENTRY_SAME(setpgid)
 	ENTRY_SAME(send)
-	ENTRY_OURS(newuname)
+	ENTRY_SAME(newuname)
 	ENTRY_SAME(umask)		/* 60 */
 	ENTRY_SAME(chroot)
 	ENTRY_COMP(ustat)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 155d571..8a54eb8 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -672,6 +672,9 @@
 	bool
 	default y
 
+config NEED_DMA_MAP_STATE
+	def_bool (PPC64 || NOT_COHERENT_CACHE)
+
 config GENERIC_ISA_DMA
 	bool
 	depends on PPC64 || POWER4 || 6xx && !CPM2
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 977f260..83f4b79 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -1,7 +1,7 @@
 /*
- * GE Fanuc PPC9A Device Tree Source
+ * GE PPC9A Device Tree Source
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 8e4efff..fc3a331 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -1,7 +1,7 @@
 /*
- * GE Fanuc SBC310 Device Tree Source
+ * GE SBC310 Device Tree Source
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index bb70600..c0671cc 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -1,7 +1,7 @@
 /*
- * GE Fanuc SBC610 Device Tree Source
+ * GE SBC610 Device Tree Source
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index 65b8b4f..d8b5d12 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -490,7 +490,7 @@
 			compatible = "cfi-flash";
 			/*
 			 * The Intel P30 chip has 2 non-identical chips on
-			 * one die, so we need to define 2 seperate regions
+			 * one die, so we need to define 2 separate regions
 			 * that are scanned by physmap_of independantly.
 			 */
 			reg = <0 0x00000000 0x02000000
diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
index 4774c2f..396d21a 100644
--- a/arch/powerpc/include/asm/compat.h
+++ b/arch/powerpc/include/asm/compat.h
@@ -7,7 +7,8 @@
 #include <linux/types.h>
 #include <linux/sched.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"ppc\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 80a973b..c85ef23 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -127,9 +127,6 @@
 	return dma_ops->dma_supported(dev, mask);
 }
 
-/* We have our own implementation of pci_set_dma_mask() */
-#define HAVE_ARCH_PCI_SET_DMA_MASK
-
 static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 {
 	struct dma_map_ops *dma_ops = get_dma_ops(dev);
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index d8a6931..a011603 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -14,6 +14,9 @@
 #define _ASM_POWERPC_PACA_H
 #ifdef __KERNEL__
 
+#ifdef CONFIG_PPC64
+
+#include <linux/init.h>
 #include <asm/types.h>
 #include <asm/lppaca.h>
 #include <asm/mmu.h>
@@ -145,8 +148,19 @@
 #endif
 };
 
-extern struct paca_struct paca[];
-extern void initialise_pacas(void);
+extern struct paca_struct *paca;
+extern __initdata struct paca_struct boot_paca;
+extern void initialise_paca(struct paca_struct *new_paca, int cpu);
+
+extern void allocate_pacas(void);
+extern void free_unused_pacas(void);
+
+#else /* CONFIG_PPC64 */
+
+static inline void allocate_pacas(void) { };
+static inline void free_unused_pacas(void) { };
+
+#endif /* CONFIG_PPC64 */
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_PACA_H */
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index b5ea626..a20a9ad 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -141,38 +141,6 @@
 
 #define HAVE_PCI_LEGACY	1
 
-#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE)
-/*
- * For 64-bit kernels, pci_unmap_{single,page} is not a nop.
- * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and
- * so on are not nops.
- * and thus...
- */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
-#else /* 32-bit && coherent */
-
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
-#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */
-
 #ifdef CONFIG_PPC64
 
 /* The PCI address space does not equal the physical memory address
diff --git a/arch/powerpc/include/asm/perf_event.h b/arch/powerpc/include/asm/perf_event.h
index 3288ce3..e6d4ce6 100644
--- a/arch/powerpc/include/asm/perf_event.h
+++ b/arch/powerpc/include/asm/perf_event.h
@@ -1,110 +1,23 @@
 /*
- * Performance event support - PowerPC-specific definitions.
+ * Performance event support - hardware-specific disambiguation
  *
- * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ * For now this is a compile-time decision, but eventually it should be
+ * runtime.  This would allow multiplatform perf event support for e300 (fsl
+ * embedded perf counters) plus server/classic, and would accommodate
+ * devices other than the core which provide their own performance counters.
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-#include <linux/types.h>
 
-#include <asm/hw_irq.h>
-
-#define MAX_HWEVENTS		8
-#define MAX_EVENT_ALTERNATIVES	8
-#define MAX_LIMITED_HWCOUNTERS	2
-
-/*
- * This struct provides the constants and functions needed to
- * describe the PMU on a particular POWER-family CPU.
- */
-struct power_pmu {
-	const char	*name;
-	int		n_counter;
-	int		max_alternatives;
-	unsigned long	add_fields;
-	unsigned long	test_adder;
-	int		(*compute_mmcr)(u64 events[], int n_ev,
-				unsigned int hwc[], unsigned long mmcr[]);
-	int		(*get_constraint)(u64 event_id, unsigned long *mskp,
-				unsigned long *valp);
-	int		(*get_alternatives)(u64 event_id, unsigned int flags,
-				u64 alt[]);
-	void		(*disable_pmc)(unsigned int pmc, unsigned long mmcr[]);
-	int		(*limited_pmc_event)(u64 event_id);
-	u32		flags;
-	int		n_generic;
-	int		*generic_events;
-	int		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
-			       [PERF_COUNT_HW_CACHE_OP_MAX]
-			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
-};
-
-/*
- * Values for power_pmu.flags
- */
-#define PPMU_LIMITED_PMC5_6	1	/* PMC5/6 have limited function */
-#define PPMU_ALT_SIPR		2	/* uses alternate posn for SIPR/HV */
-
-/*
- * Values for flags to get_alternatives()
- */
-#define PPMU_LIMITED_PMC_OK	1	/* can put this on a limited PMC */
-#define PPMU_LIMITED_PMC_REQD	2	/* have to put this on a limited PMC */
-#define PPMU_ONLY_COUNT_RUN	4	/* only counting in run state */
-
-extern int register_power_pmu(struct power_pmu *);
-
-struct pt_regs;
-extern unsigned long perf_misc_flags(struct pt_regs *regs);
-extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
-
-#define PERF_EVENT_INDEX_OFFSET	1
-
-/*
- * Only override the default definitions in include/linux/perf_event.h
- * if we have hardware PMU support.
- */
 #ifdef CONFIG_PPC_PERF_CTRS
-#define perf_misc_flags(regs)	perf_misc_flags(regs)
+#include <asm/perf_event_server.h>
 #endif
 
-/*
- * The power_pmu.get_constraint function returns a 32/64-bit value and
- * a 32/64-bit mask that express the constraints between this event_id and
- * other events.
- *
- * The value and mask are divided up into (non-overlapping) bitfields
- * of three different types:
- *
- * Select field: this expresses the constraint that some set of bits
- * in MMCR* needs to be set to a specific value for this event_id.  For a
- * select field, the mask contains 1s in every bit of the field, and
- * the value contains a unique value for each possible setting of the
- * MMCR* bits.  The constraint checking code will ensure that two events
- * that set the same field in their masks have the same value in their
- * value dwords.
- *
- * Add field: this expresses the constraint that there can be at most
- * N events in a particular class.  A field of k bits can be used for
- * N <= 2^(k-1) - 1.  The mask has the most significant bit of the field
- * set (and the other bits 0), and the value has only the least significant
- * bit of the field set.  In addition, the 'add_fields' and 'test_adder'
- * in the struct power_pmu for this processor come into play.  The
- * add_fields value contains 1 in the LSB of the field, and the
- * test_adder contains 2^(k-1) - 1 - N in the field.
- *
- * NAND field: this expresses the constraint that you may not have events
- * in all of a set of classes.  (For example, on PPC970, you can't select
- * events from the FPU, ISU and IDU simultaneously, although any two are
- * possible.)  For N classes, the field is N+1 bits wide, and each class
- * is assigned one bit from the least-significant N bits.  The mask has
- * only the most-significant bit set, and the value has only the bit
- * for the event_id's class set.  The test_adder has the least significant
- * bit set in the field.
- *
- * If an event_id is not subject to the constraint expressed by a particular
- * field, then it will have 0 in both the mask and value for that field.
- */
+#ifdef CONFIG_FSL_EMB_PERF_EVENT
+#include <asm/perf_event_fsl_emb.h>
+#endif
diff --git a/arch/powerpc/include/asm/perf_event_fsl_emb.h b/arch/powerpc/include/asm/perf_event_fsl_emb.h
new file mode 100644
index 0000000..718a9fa
--- /dev/null
+++ b/arch/powerpc/include/asm/perf_event_fsl_emb.h
@@ -0,0 +1,50 @@
+/*
+ * Performance event support - Freescale embedded specific definitions.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <asm/hw_irq.h>
+
+#define MAX_HWEVENTS 4
+
+/* event flags */
+#define FSL_EMB_EVENT_VALID      1
+#define FSL_EMB_EVENT_RESTRICTED 2
+
+/* upper half of event flags is PMLCb */
+#define FSL_EMB_EVENT_THRESHMUL  0x0000070000000000ULL
+#define FSL_EMB_EVENT_THRESH     0x0000003f00000000ULL
+
+struct fsl_emb_pmu {
+	const char	*name;
+	int		n_counter; /* total number of counters */
+
+	/*
+	 * The number of contiguous counters starting at zero that
+	 * can hold restricted events, or zero if there are no
+	 * restricted events.
+	 *
+	 * This isn't a very flexible method of expressing constraints,
+	 * but it's very simple and is adequate for existing chips.
+	 */
+	int		n_restricted;
+
+	/* Returns event flags and PMLCb (FSL_EMB_EVENT_*) */
+	u64		(*xlate_event)(u64 event_id);
+
+	int		n_generic;
+	int		*generic_events;
+	int		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+			       [PERF_COUNT_HW_CACHE_OP_MAX]
+			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
+};
+
+int register_fsl_emb_pmu(struct fsl_emb_pmu *);
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
new file mode 100644
index 0000000..8f1df12
--- /dev/null
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -0,0 +1,110 @@
+/*
+ * Performance event support - PowerPC classic/server specific definitions.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <asm/hw_irq.h>
+
+#define MAX_HWEVENTS		8
+#define MAX_EVENT_ALTERNATIVES	8
+#define MAX_LIMITED_HWCOUNTERS	2
+
+/*
+ * This struct provides the constants and functions needed to
+ * describe the PMU on a particular POWER-family CPU.
+ */
+struct power_pmu {
+	const char	*name;
+	int		n_counter;
+	int		max_alternatives;
+	unsigned long	add_fields;
+	unsigned long	test_adder;
+	int		(*compute_mmcr)(u64 events[], int n_ev,
+				unsigned int hwc[], unsigned long mmcr[]);
+	int		(*get_constraint)(u64 event_id, unsigned long *mskp,
+				unsigned long *valp);
+	int		(*get_alternatives)(u64 event_id, unsigned int flags,
+				u64 alt[]);
+	void		(*disable_pmc)(unsigned int pmc, unsigned long mmcr[]);
+	int		(*limited_pmc_event)(u64 event_id);
+	u32		flags;
+	int		n_generic;
+	int		*generic_events;
+	int		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+			       [PERF_COUNT_HW_CACHE_OP_MAX]
+			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
+};
+
+/*
+ * Values for power_pmu.flags
+ */
+#define PPMU_LIMITED_PMC5_6	1	/* PMC5/6 have limited function */
+#define PPMU_ALT_SIPR		2	/* uses alternate posn for SIPR/HV */
+
+/*
+ * Values for flags to get_alternatives()
+ */
+#define PPMU_LIMITED_PMC_OK	1	/* can put this on a limited PMC */
+#define PPMU_LIMITED_PMC_REQD	2	/* have to put this on a limited PMC */
+#define PPMU_ONLY_COUNT_RUN	4	/* only counting in run state */
+
+extern int register_power_pmu(struct power_pmu *);
+
+struct pt_regs;
+extern unsigned long perf_misc_flags(struct pt_regs *regs);
+extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+
+#define PERF_EVENT_INDEX_OFFSET	1
+
+/*
+ * Only override the default definitions in include/linux/perf_event.h
+ * if we have hardware PMU support.
+ */
+#ifdef CONFIG_PPC_PERF_CTRS
+#define perf_misc_flags(regs)	perf_misc_flags(regs)
+#endif
+
+/*
+ * The power_pmu.get_constraint function returns a 32/64-bit value and
+ * a 32/64-bit mask that express the constraints between this event_id and
+ * other events.
+ *
+ * The value and mask are divided up into (non-overlapping) bitfields
+ * of three different types:
+ *
+ * Select field: this expresses the constraint that some set of bits
+ * in MMCR* needs to be set to a specific value for this event_id.  For a
+ * select field, the mask contains 1s in every bit of the field, and
+ * the value contains a unique value for each possible setting of the
+ * MMCR* bits.  The constraint checking code will ensure that two events
+ * that set the same field in their masks have the same value in their
+ * value dwords.
+ *
+ * Add field: this expresses the constraint that there can be at most
+ * N events in a particular class.  A field of k bits can be used for
+ * N <= 2^(k-1) - 1.  The mask has the most significant bit of the field
+ * set (and the other bits 0), and the value has only the least significant
+ * bit of the field set.  In addition, the 'add_fields' and 'test_adder'
+ * in the struct power_pmu for this processor come into play.  The
+ * add_fields value contains 1 in the LSB of the field, and the
+ * test_adder contains 2^(k-1) - 1 - N in the field.
+ *
+ * NAND field: this expresses the constraint that you may not have events
+ * in all of a set of classes.  (For example, on PPC970, you can't select
+ * events from the FPU, ISU and IDU simultaneously, although any two are
+ * possible.)  For N classes, the field is N+1 bits wide, and each class
+ * is assigned one bit from the least-significant N bits.  The mask has
+ * only the most-significant bit set, and the value has only the bit
+ * for the event_id's class set.  The test_adder has the least significant
+ * bit set in the field.
+ *
+ * If an event_id is not subject to the constraint expressed by a particular
+ * field, then it will have 0 in both the mask and value for that field.
+ */
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index b451081..9e2d84c 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -137,15 +137,8 @@
 } while (0)
 #endif /* __powerpc64__ */
 
-/*
- * These are defined as per linux/ptrace.h, which see.
- */
 #define arch_has_single_step()	(1)
 #define arch_has_block_step()	(!cpu_has_feature(CPU_FTR_601))
-extern void user_enable_single_step(struct task_struct *);
-extern void user_enable_block_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
-
 #define ARCH_HAS_USER_SINGLE_STEP_INFO
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 8808d30..414d434 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -421,8 +421,8 @@
 /* Bit definitions related to the DBCR2. */
 #define DBCR2_DAC1US	0xC0000000	/* Data Addr Cmp 1 Sup/User   */
 #define DBCR2_DAC1ER	0x30000000	/* Data Addr Cmp 1 Eff/Real */
-#define DBCR2_DAC2US	0x00000000	/* Data Addr Cmp 2 Sup/User   */
-#define DBCR2_DAC2ER	0x00000000	/* Data Addr Cmp 2 Eff/Real */
+#define DBCR2_DAC2US	0x0C000000	/* Data Addr Cmp 2 Sup/User   */
+#define DBCR2_DAC2ER	0x03000000	/* Data Addr Cmp 2 Eff/Real */
 #define DBCR2_DAC12M	0x00800000	/* DAC 1-2 range enable */
 #define DBCR2_DAC12MM	0x00400000	/* DAC 1-2 Mask mode*/
 #define DBCR2_DAC12MX	0x00C00000	/* DAC 1-2 range eXclusive */
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 0de404d..77bb71c 100644
--- a/arch/powerpc/include/asm/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -31,7 +31,7 @@
 #define PMLCA_FCM0	0x08000000	/* Freeze when PMM==0 */
 #define PMLCA_CE	0x04000000	/* Condition Enable */
 
-#define PMLCA_EVENT_MASK 0x007f0000	/* Event field */
+#define PMLCA_EVENT_MASK 0x00ff0000	/* Event field */
 #define PMLCA_EVENT_SHIFT	16
 
 #define PMRN_PMLCB0	0x110	/* PM Local Control B0 */
diff --git a/arch/powerpc/include/asm/syscalls.h b/arch/powerpc/include/asm/syscalls.h
index eb8eb40..4084e56 100644
--- a/arch/powerpc/include/asm/syscalls.h
+++ b/arch/powerpc/include/asm/syscalls.h
@@ -7,7 +7,6 @@
 #include <linux/types.h>
 #include <asm/signal.h>
 
-struct new_utsname;
 struct pt_regs;
 struct rtas_args;
 struct sigaction;
@@ -35,12 +34,9 @@
 asmlinkage long sys_rt_sigaction(int sig,
 		const struct sigaction __user *act,
 		struct sigaction __user *oact, size_t sigsetsize);
-asmlinkage int sys_ipc(uint call, int first, unsigned long second,
-		long third, void __user *ptr, long fifth);
 asmlinkage long ppc64_personality(unsigned long personality);
 asmlinkage int ppc_rtas(struct rtas_args __user *uargs);
 asmlinkage time_t sys64_time(time_t __user * tloc);
-asmlinkage long ppc_newuname(struct new_utsname __user * name);
 
 asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
 		size_t sigsetsize);
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 07d2d19..a5ee345 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -125,7 +125,7 @@
 SYS32ONLY(sigreturn)
 PPC_SYS(clone)
 COMPAT_SYS_SPU(setdomainname)
-PPC_SYS_SPU(newuname)
+SYSCALL_SPU(newuname)
 SYSCALL(ni_syscall)
 COMPAT_SYS_SPU(adjtimex)
 SYSCALL_SPU(mprotect)
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index f6ca761..f0a1026 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -364,6 +364,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -376,6 +377,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index c002b04..8773263 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -98,11 +98,16 @@
 
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
-obj-$(CONFIG_PPC_PERF_CTRS)	+= perf_event.o perf_callchain.o
+obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
+
+obj-$(CONFIG_PPC_PERF_CTRS)	+= perf_event.o
 obj64-$(CONFIG_PPC_PERF_CTRS)	+= power4-pmu.o ppc970-pmu.o power5-pmu.o \
 				   power5+-pmu.o power6-pmu.o power7-pmu.o
 obj32-$(CONFIG_PPC_PERF_CTRS)	+= mpc7450-pmu.o
 
+obj-$(CONFIG_FSL_EMB_PERF_EVENT) += perf_event_fsl_emb.o
+obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o
+
 obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
 
 ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index bb37b1d..01fe9ce 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -642,7 +642,7 @@
 	&cache_assoc_attr,
 };
 
-static struct sysfs_ops cache_index_ops = {
+static const struct sysfs_ops cache_index_ops = {
 	.show = cache_index_show,
 };
 
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 2fc82ba..8af4949 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1808,7 +1808,7 @@
 		.icache_bsize		= 64,
 		.dcache_bsize		= 64,
 		.num_pmcs		= 4,
-		.oprofile_cpu_type	= "ppc/e500", /* xxx - galak, e500mc? */
+		.oprofile_cpu_type	= "ppc/e500mc",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e500mc,
 		.machine_check		= machine_check_e500,
diff --git a/arch/powerpc/kernel/e500-pmu.c b/arch/powerpc/kernel/e500-pmu.c
new file mode 100644
index 0000000..7c07de0
--- /dev/null
+++ b/arch/powerpc/kernel/e500-pmu.c
@@ -0,0 +1,129 @@
+/*
+ * Performance counter support for e500 family processors.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/perf_event.h>
+#include <asm/reg.h>
+#include <asm/cputable.h>
+
+/*
+ * Map of generic hardware event types to hardware events
+ * Zero if unsupported
+ */
+static int e500_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = 1,
+	[PERF_COUNT_HW_INSTRUCTIONS] = 2,
+	[PERF_COUNT_HW_CACHE_MISSES] = 41, /* Data L1 cache reloads */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12,
+	[PERF_COUNT_HW_BRANCH_MISSES] = 15,
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int e500_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	/*
+	 * D-cache misses are not split into read/write/prefetch;
+	 * use raw event 41.
+	 */
+	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	27,		0	},
+		[C(OP_WRITE)] = {	28,		0	},
+		[C(OP_PREFETCH)] = {	29,		0	},
+	},
+	[C(L1I)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	2,		60	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	/*
+	 * Assuming LL means L2, it's not a good match for this model.
+	 * It allocates only on L1 castout or explicit prefetch, and
+	 * does not have separate read/write events (but it does have
+	 * separate instruction/data events).
+	 */
+	[C(LL)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0	},
+		[C(OP_WRITE)] = {	0,		0	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	/*
+	 * There are data/instruction MMU misses, but that's a miss on
+	 * the chip's internal level-one TLB which is probably not
+	 * what the user wants.  Instead, unified level-two TLB misses
+	 * are reported here.
+	 */
+	[C(DTLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	26,		66	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(BPU)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	12,		15 	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+};
+
+static int num_events = 128;
+
+/* Upper half of event id is PMLCb, for threshold events */
+static u64 e500_xlate_event(u64 event_id)
+{
+	u32 event_low = (u32)event_id;
+	u64 ret;
+
+	if (event_low >= num_events)
+		return 0;
+
+	ret = FSL_EMB_EVENT_VALID;
+
+	if (event_low >= 76 && event_low <= 81) {
+		ret |= FSL_EMB_EVENT_RESTRICTED;
+		ret |= event_id &
+		       (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH);
+	} else if (event_id &
+	           (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH)) {
+		/* Threshold requested on non-threshold event */
+		return 0;
+	}
+
+	return ret;
+}
+
+static struct fsl_emb_pmu e500_pmu = {
+	.name			= "e500 family",
+	.n_counter		= 4,
+	.n_restricted		= 2,
+	.xlate_event		= e500_xlate_event,
+	.n_generic		= ARRAY_SIZE(e500_generic_events),
+	.generic_events		= e500_generic_events,
+	.cache_events		= &e500_cache_events,
+};
+
+static int init_e500_pmu(void)
+{
+	if (!cur_cpu_spec->oprofile_cpu_type)
+		return -ENODEV;
+
+	if (!strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e500mc"))
+		num_events = 256;
+	else if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e500"))
+		return -ENODEV;
+
+	return register_fsl_emb_pmu(&e500_pmu);
+}
+
+arch_initcall(init_e500_pmu);
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 9258074..bed9a29 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -219,7 +219,8 @@
 	 * physical cpu id in r24, we need to search the pacas to find
 	 * which logical id maps to our physical one.
 	 */
-	LOAD_REG_ADDR(r13, paca)	/* Get base vaddr of paca array	 */
+	LOAD_REG_ADDR(r13, paca)	/* Load paca pointer		 */
+	ld	r13,0(r13)		/* Get base vaddr of paca array	 */
 	li	r5,0			/* logical cpu id                */
 1:	lhz	r6,PACAHWCPUID(r13)	/* Load HW procid from paca      */
 	cmpw	r6,r24			/* Compare to our id             */
@@ -536,7 +537,8 @@
 	mtmsrd	r3			/* RI on */
 
 	/* Set up a paca value for this processor. */
-	LOAD_REG_ADDR(r4,paca)		/* Get base vaddr of paca array	*/
+	LOAD_REG_ADDR(r4,paca)		/* Load paca pointer		*/
+	ld	r4,0(r4)		/* Get base vaddr of paca array	*/
 	mulli	r13,r24,PACA_SIZE	/* Calculate vaddr of right paca */
 	add	r13,r13,r4		/* for this processor.		*/
 	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG*/
@@ -615,6 +617,17 @@
 	std	r3,0(r1)		/* Zero the stack frame pointer	*/
 	bl	.start_secondary
 	b	.
+/*
+ * Reset stack pointer and call start_secondary
+ * to continue with online operation when woken up
+ * from cede in cpu offline.
+ */
+_GLOBAL(start_secondary_resume)
+	ld	r1,PACAKSAVE(r13)	/* Reload kernel stack pointer */
+	li	r3,0
+	std	r3,0(r1)		/* Zero the stack frame pointer	*/
+	bl	.start_secondary
+	b	.
 #endif
 
 /*
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 9ddfaef..035ada5 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -469,7 +469,7 @@
 		return -ENODEV;
 
 	/*
-	 * Before we register the platfrom serial devices, we need
+	 * Before we register the platform serial devices, we need
 	 * to fixup their interrupts and their IO ports.
 	 */
 	DBG("Fixing serial ports interrupts and IO ports ...\n");
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index d16b1ea..0c40c6f 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -9,11 +9,15 @@
 
 #include <linux/threads.h>
 #include <linux/module.h>
+#include <linux/lmb.h>
 
+#include <asm/firmware.h>
 #include <asm/lppaca.h>
 #include <asm/paca.h>
 #include <asm/sections.h>
 #include <asm/pgtable.h>
+#include <asm/iseries/lpar_map.h>
+#include <asm/iseries/hv_types.h>
 
 /* This symbol is provided by the linker - let it fill in the paca
  * field correctly */
@@ -70,37 +74,82 @@
  * processors.  The processor VPD array needs one entry per physical
  * processor (not thread).
  */
-struct paca_struct paca[NR_CPUS];
+struct paca_struct *paca;
 EXPORT_SYMBOL(paca);
 
-void __init initialise_pacas(void)
-{
-	int cpu;
+struct paca_struct boot_paca;
 
-	/* The TOC register (GPR2) points 32kB into the TOC, so that 64kB
-	 * of the TOC can be addressed using a single machine instruction.
-	 */
+void __init initialise_paca(struct paca_struct *new_paca, int cpu)
+{
+       /* The TOC register (GPR2) points 32kB into the TOC, so that 64kB
+	* of the TOC can be addressed using a single machine instruction.
+	*/
 	unsigned long kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL;
 
-	/* Can't use for_each_*_cpu, as they aren't functional yet */
-	for (cpu = 0; cpu < NR_CPUS; cpu++) {
-		struct paca_struct *new_paca = &paca[cpu];
-
 #ifdef CONFIG_PPC_BOOK3S
-		new_paca->lppaca_ptr = &lppaca[cpu];
+	new_paca->lppaca_ptr = &lppaca[cpu];
 #else
-		new_paca->kernel_pgd = swapper_pg_dir;
+	new_paca->kernel_pgd = swapper_pg_dir;
 #endif
-		new_paca->lock_token = 0x8000;
-		new_paca->paca_index = cpu;
-		new_paca->kernel_toc = kernel_toc;
-		new_paca->kernelbase = (unsigned long) _stext;
-		new_paca->kernel_msr = MSR_KERNEL;
-		new_paca->hw_cpu_id = 0xffff;
-		new_paca->__current = &init_task;
+	new_paca->lock_token = 0x8000;
+	new_paca->paca_index = cpu;
+	new_paca->kernel_toc = kernel_toc;
+	new_paca->kernelbase = (unsigned long) _stext;
+	new_paca->kernel_msr = MSR_KERNEL;
+	new_paca->hw_cpu_id = 0xffff;
+	new_paca->__current = &init_task;
 #ifdef CONFIG_PPC_STD_MMU_64
-		new_paca->slb_shadow_ptr = &slb_shadow[cpu];
+	new_paca->slb_shadow_ptr = &slb_shadow[cpu];
 #endif /* CONFIG_PPC_STD_MMU_64 */
+}
 
-	}
+static int __initdata paca_size;
+
+void __init allocate_pacas(void)
+{
+	int nr_cpus, cpu, limit;
+
+	/*
+	 * We can't take SLB misses on the paca, and we want to access them
+	 * in real mode, so allocate them within the RMA and also within
+	 * the first segment. On iSeries they must be within the area mapped
+	 * by the HV, which is HvPagesToMap * HVPAGESIZE bytes.
+	 */
+	limit = min(0x10000000ULL, lmb.rmo_size);
+	if (firmware_has_feature(FW_FEATURE_ISERIES))
+		limit = min(limit, HvPagesToMap * HVPAGESIZE);
+
+	nr_cpus = NR_CPUS;
+	/* On iSeries we know we can never have more than 64 cpus */
+	if (firmware_has_feature(FW_FEATURE_ISERIES))
+		nr_cpus = min(64, nr_cpus);
+
+	paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpus);
+
+	paca = __va(lmb_alloc_base(paca_size, PAGE_SIZE, limit));
+	memset(paca, 0, paca_size);
+
+	printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n",
+		paca_size, nr_cpus, paca);
+
+	/* Can't use for_each_*_cpu, as they aren't functional yet */
+	for (cpu = 0; cpu < nr_cpus; cpu++)
+		initialise_paca(&paca[cpu], cpu);
+}
+
+void __init free_unused_pacas(void)
+{
+	int new_size;
+
+	new_size = PAGE_ALIGN(sizeof(struct paca_struct) * num_possible_cpus());
+
+	if (new_size >= paca_size)
+		return;
+
+	lmb_free(__pa(paca) + new_size, paca_size - new_size);
+
+	printk(KERN_DEBUG "Freed %u bytes for unused pacas\n",
+		paca_size - new_size);
+
+	paca_size = new_size;
 }
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 2597f95..f3c42ce5 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -63,21 +63,6 @@
 }
 EXPORT_SYMBOL(get_pci_dma_ops);
 
-int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	return dma_set_mask(&dev->dev, mask);
-}
-
-int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	int rc;
-
-	rc = dma_set_mask(&dev->dev, mask);
-	dev->dev.coherent_dma_mask = dev->dma_mask;
-
-	return rc;
-}
-
 struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
 {
 	struct pci_controller *phb;
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index b6cf8f1..5120bd4 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -1164,10 +1164,10 @@
 	 * Finally record data if requested.
 	 */
 	if (record) {
-		struct perf_sample_data data = {
-			.addr	= ~0ULL,
-			.period	= event->hw.last_period,
-		};
+		struct perf_sample_data data;
+
+		perf_sample_data_init(&data, ~0ULL);
+		data.period = event->hw.last_period;
 
 		if (event->attr.sample_type & PERF_SAMPLE_ADDR)
 			perf_get_data_addr(regs, &data.addr);
diff --git a/arch/powerpc/kernel/perf_event_fsl_emb.c b/arch/powerpc/kernel/perf_event_fsl_emb.c
new file mode 100644
index 0000000..369872f
--- /dev/null
+++ b/arch/powerpc/kernel/perf_event_fsl_emb.c
@@ -0,0 +1,654 @@
+/*
+ * Performance event support - Freescale Embedded Performance Monitor
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_event.h>
+#include <linux/percpu.h>
+#include <linux/hardirq.h>
+#include <asm/reg_fsl_emb.h>
+#include <asm/pmc.h>
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+#include <asm/ptrace.h>
+
+struct cpu_hw_events {
+	int n_events;
+	int disabled;
+	u8  pmcs_enabled;
+	struct perf_event *event[MAX_HWEVENTS];
+};
+static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+static struct fsl_emb_pmu *ppmu;
+
+/* Number of perf_events counting hardware events */
+static atomic_t num_events;
+/* Used to avoid races in calling reserve/release_pmc_hardware */
+static DEFINE_MUTEX(pmc_reserve_mutex);
+
+/*
+ * If interrupts were soft-disabled when a PMU interrupt occurs, treat
+ * it as an NMI.
+ */
+static inline int perf_intr_is_nmi(struct pt_regs *regs)
+{
+#ifdef __powerpc64__
+	return !regs->softe;
+#else
+	return 0;
+#endif
+}
+
+static void perf_event_interrupt(struct pt_regs *regs);
+
+/*
+ * Read one performance monitor counter (PMC).
+ */
+static unsigned long read_pmc(int idx)
+{
+	unsigned long val;
+
+	switch (idx) {
+	case 0:
+		val = mfpmr(PMRN_PMC0);
+		break;
+	case 1:
+		val = mfpmr(PMRN_PMC1);
+		break;
+	case 2:
+		val = mfpmr(PMRN_PMC2);
+		break;
+	case 3:
+		val = mfpmr(PMRN_PMC3);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to read PMC%d\n", idx);
+		val = 0;
+	}
+	return val;
+}
+
+/*
+ * Write one PMC.
+ */
+static void write_pmc(int idx, unsigned long val)
+{
+	switch (idx) {
+	case 0:
+		mtpmr(PMRN_PMC0, val);
+		break;
+	case 1:
+		mtpmr(PMRN_PMC1, val);
+		break;
+	case 2:
+		mtpmr(PMRN_PMC2, val);
+		break;
+	case 3:
+		mtpmr(PMRN_PMC3, val);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to write PMC%d\n", idx);
+	}
+
+	isync();
+}
+
+/*
+ * Write one local control A register
+ */
+static void write_pmlca(int idx, unsigned long val)
+{
+	switch (idx) {
+	case 0:
+		mtpmr(PMRN_PMLCA0, val);
+		break;
+	case 1:
+		mtpmr(PMRN_PMLCA1, val);
+		break;
+	case 2:
+		mtpmr(PMRN_PMLCA2, val);
+		break;
+	case 3:
+		mtpmr(PMRN_PMLCA3, val);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to write PMLCA%d\n", idx);
+	}
+
+	isync();
+}
+
+/*
+ * Write one local control B register
+ */
+static void write_pmlcb(int idx, unsigned long val)
+{
+	switch (idx) {
+	case 0:
+		mtpmr(PMRN_PMLCB0, val);
+		break;
+	case 1:
+		mtpmr(PMRN_PMLCB1, val);
+		break;
+	case 2:
+		mtpmr(PMRN_PMLCB2, val);
+		break;
+	case 3:
+		mtpmr(PMRN_PMLCB3, val);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to write PMLCB%d\n", idx);
+	}
+
+	isync();
+}
+
+static void fsl_emb_pmu_read(struct perf_event *event)
+{
+	s64 val, delta, prev;
+
+	/*
+	 * Performance monitor interrupts come even when interrupts
+	 * are soft-disabled, as long as interrupts are hard-enabled.
+	 * Therefore we treat them like NMIs.
+	 */
+	do {
+		prev = atomic64_read(&event->hw.prev_count);
+		barrier();
+		val = read_pmc(event->hw.idx);
+	} while (atomic64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
+
+	/* The counters are only 32 bits wide */
+	delta = (val - prev) & 0xfffffffful;
+	atomic64_add(delta, &event->count);
+	atomic64_sub(delta, &event->hw.period_left);
+}
+
+/*
+ * Disable all events to prevent PMU interrupts and to allow
+ * events to be added or removed.
+ */
+void hw_perf_disable(void)
+{
+	struct cpu_hw_events *cpuhw;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+
+	if (!cpuhw->disabled) {
+		cpuhw->disabled = 1;
+
+		/*
+		 * Check if we ever enabled the PMU on this cpu.
+		 */
+		if (!cpuhw->pmcs_enabled) {
+			ppc_enable_pmcs();
+			cpuhw->pmcs_enabled = 1;
+		}
+
+		if (atomic_read(&num_events)) {
+			/*
+			 * Set the 'freeze all counters' bit, and disable
+			 * interrupts.  The barrier is to make sure the
+			 * mtpmr has been executed and the PMU has frozen
+			 * the events before we return.
+			 */
+
+			mtpmr(PMRN_PMGC0, PMGC0_FAC);
+			isync();
+		}
+	}
+	local_irq_restore(flags);
+}
+
+/*
+ * Re-enable all events if disable == 0.
+ * If we were previously disabled and events were added, then
+ * put the new config on the PMU.
+ */
+void hw_perf_enable(void)
+{
+	struct cpu_hw_events *cpuhw;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+	if (!cpuhw->disabled)
+		goto out;
+
+	cpuhw->disabled = 0;
+	ppc_set_pmu_inuse(cpuhw->n_events != 0);
+
+	if (cpuhw->n_events > 0) {
+		mtpmr(PMRN_PMGC0, PMGC0_PMIE | PMGC0_FCECE);
+		isync();
+	}
+
+ out:
+	local_irq_restore(flags);
+}
+
+static int collect_events(struct perf_event *group, int max_count,
+			  struct perf_event *ctrs[])
+{
+	int n = 0;
+	struct perf_event *event;
+
+	if (!is_software_event(group)) {
+		if (n >= max_count)
+			return -1;
+		ctrs[n] = group;
+		n++;
+	}
+	list_for_each_entry(event, &group->sibling_list, group_entry) {
+		if (!is_software_event(event) &&
+		    event->state != PERF_EVENT_STATE_OFF) {
+			if (n >= max_count)
+				return -1;
+			ctrs[n] = event;
+			n++;
+		}
+	}
+	return n;
+}
+
+/* perf must be disabled, context locked on entry */
+static int fsl_emb_pmu_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuhw;
+	int ret = -EAGAIN;
+	int num_counters = ppmu->n_counter;
+	u64 val;
+	int i;
+
+	cpuhw = &get_cpu_var(cpu_hw_events);
+
+	if (event->hw.config & FSL_EMB_EVENT_RESTRICTED)
+		num_counters = ppmu->n_restricted;
+
+	/*
+	 * Allocate counters from top-down, so that restricted-capable
+	 * counters are kept free as long as possible.
+	 */
+	for (i = num_counters - 1; i >= 0; i--) {
+		if (cpuhw->event[i])
+			continue;
+
+		break;
+	}
+
+	if (i < 0)
+		goto out;
+
+	event->hw.idx = i;
+	cpuhw->event[i] = event;
+	++cpuhw->n_events;
+
+	val = 0;
+	if (event->hw.sample_period) {
+		s64 left = atomic64_read(&event->hw.period_left);
+		if (left < 0x80000000L)
+			val = 0x80000000L - left;
+	}
+	atomic64_set(&event->hw.prev_count, val);
+	write_pmc(i, val);
+	perf_event_update_userpage(event);
+
+	write_pmlcb(i, event->hw.config >> 32);
+	write_pmlca(i, event->hw.config_base);
+
+	ret = 0;
+ out:
+	put_cpu_var(cpu_hw_events);
+	return ret;
+}
+
+/* perf must be disabled, context locked on entry */
+static void fsl_emb_pmu_disable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuhw;
+	int i = event->hw.idx;
+
+	if (i < 0)
+		goto out;
+
+	fsl_emb_pmu_read(event);
+
+	cpuhw = &get_cpu_var(cpu_hw_events);
+
+	WARN_ON(event != cpuhw->event[event->hw.idx]);
+
+	write_pmlca(i, 0);
+	write_pmlcb(i, 0);
+	write_pmc(i, 0);
+
+	cpuhw->event[i] = NULL;
+	event->hw.idx = -1;
+
+	/*
+	 * TODO: if at least one restricted event exists, and we
+	 * just freed up a non-restricted-capable counter, and
+	 * there is a restricted-capable counter occupied by
+	 * a non-restricted event, migrate that event to the
+	 * vacated counter.
+	 */
+
+	cpuhw->n_events--;
+
+ out:
+	put_cpu_var(cpu_hw_events);
+}
+
+/*
+ * Re-enable interrupts on a event after they were throttled
+ * because they were coming too fast.
+ *
+ * Context is locked on entry, but perf is not disabled.
+ */
+static void fsl_emb_pmu_unthrottle(struct perf_event *event)
+{
+	s64 val, left;
+	unsigned long flags;
+
+	if (event->hw.idx < 0 || !event->hw.sample_period)
+		return;
+	local_irq_save(flags);
+	perf_disable();
+	fsl_emb_pmu_read(event);
+	left = event->hw.sample_period;
+	event->hw.last_period = left;
+	val = 0;
+	if (left < 0x80000000L)
+		val = 0x80000000L - left;
+	write_pmc(event->hw.idx, val);
+	atomic64_set(&event->hw.prev_count, val);
+	atomic64_set(&event->hw.period_left, left);
+	perf_event_update_userpage(event);
+	perf_enable();
+	local_irq_restore(flags);
+}
+
+static struct pmu fsl_emb_pmu = {
+	.enable		= fsl_emb_pmu_enable,
+	.disable	= fsl_emb_pmu_disable,
+	.read		= fsl_emb_pmu_read,
+	.unthrottle	= fsl_emb_pmu_unthrottle,
+};
+
+/*
+ * Release the PMU if this is the last perf_event.
+ */
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+	if (!atomic_add_unless(&num_events, -1, 1)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_dec_return(&num_events) == 0)
+			release_pmc_hardware();
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+}
+
+/*
+ * Translate a generic cache event_id config to a raw event_id code.
+ */
+static int hw_perf_cache_event(u64 config, u64 *eventp)
+{
+	unsigned long type, op, result;
+	int ev;
+
+	if (!ppmu->cache_events)
+		return -EINVAL;
+
+	/* unpack config */
+	type = config & 0xff;
+	op = (config >> 8) & 0xff;
+	result = (config >> 16) & 0xff;
+
+	if (type >= PERF_COUNT_HW_CACHE_MAX ||
+	    op >= PERF_COUNT_HW_CACHE_OP_MAX ||
+	    result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ev = (*ppmu->cache_events)[type][op][result];
+	if (ev == 0)
+		return -EOPNOTSUPP;
+	if (ev == -1)
+		return -EINVAL;
+	*eventp = ev;
+	return 0;
+}
+
+const struct pmu *hw_perf_event_init(struct perf_event *event)
+{
+	u64 ev;
+	struct perf_event *events[MAX_HWEVENTS];
+	int n;
+	int err;
+	int num_restricted;
+	int i;
+
+	switch (event->attr.type) {
+	case PERF_TYPE_HARDWARE:
+		ev = event->attr.config;
+		if (ev >= ppmu->n_generic || ppmu->generic_events[ev] == 0)
+			return ERR_PTR(-EOPNOTSUPP);
+		ev = ppmu->generic_events[ev];
+		break;
+
+	case PERF_TYPE_HW_CACHE:
+		err = hw_perf_cache_event(event->attr.config, &ev);
+		if (err)
+			return ERR_PTR(err);
+		break;
+
+	case PERF_TYPE_RAW:
+		ev = event->attr.config;
+		break;
+
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	event->hw.config = ppmu->xlate_event(ev);
+	if (!(event->hw.config & FSL_EMB_EVENT_VALID))
+		return ERR_PTR(-EINVAL);
+
+	/*
+	 * If this is in a group, check if it can go on with all the
+	 * other hardware events in the group.  We assume the event
+	 * hasn't been linked into its leader's sibling list at this point.
+	 */
+	n = 0;
+	if (event->group_leader != event) {
+		n = collect_events(event->group_leader,
+		                   ppmu->n_counter - 1, events);
+		if (n < 0)
+			return ERR_PTR(-EINVAL);
+	}
+
+	if (event->hw.config & FSL_EMB_EVENT_RESTRICTED) {
+		num_restricted = 0;
+		for (i = 0; i < n; i++) {
+			if (events[i]->hw.config & FSL_EMB_EVENT_RESTRICTED)
+				num_restricted++;
+		}
+
+		if (num_restricted >= ppmu->n_restricted)
+			return ERR_PTR(-EINVAL);
+	}
+
+	event->hw.idx = -1;
+
+	event->hw.config_base = PMLCA_CE | PMLCA_FCM1 |
+	                        (u32)((ev << 16) & PMLCA_EVENT_MASK);
+
+	if (event->attr.exclude_user)
+		event->hw.config_base |= PMLCA_FCU;
+	if (event->attr.exclude_kernel)
+		event->hw.config_base |= PMLCA_FCS;
+	if (event->attr.exclude_idle)
+		return ERR_PTR(-ENOTSUPP);
+
+	event->hw.last_period = event->hw.sample_period;
+	atomic64_set(&event->hw.period_left, event->hw.last_period);
+
+	/*
+	 * See if we need to reserve the PMU.
+	 * If no events are currently in use, then we have to take a
+	 * mutex to ensure that we don't race with another task doing
+	 * reserve_pmc_hardware or release_pmc_hardware.
+	 */
+	err = 0;
+	if (!atomic_inc_not_zero(&num_events)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_read(&num_events) == 0 &&
+		    reserve_pmc_hardware(perf_event_interrupt))
+			err = -EBUSY;
+		else
+			atomic_inc(&num_events);
+		mutex_unlock(&pmc_reserve_mutex);
+
+		mtpmr(PMRN_PMGC0, PMGC0_FAC);
+		isync();
+	}
+	event->destroy = hw_perf_event_destroy;
+
+	if (err)
+		return ERR_PTR(err);
+	return &fsl_emb_pmu;
+}
+
+/*
+ * A counter has overflowed; update its count and record
+ * things if requested.  Note that interrupts are hard-disabled
+ * here so there is no possibility of being interrupted.
+ */
+static void record_and_restart(struct perf_event *event, unsigned long val,
+			       struct pt_regs *regs, int nmi)
+{
+	u64 period = event->hw.sample_period;
+	s64 prev, delta, left;
+	int record = 0;
+
+	/* we don't have to worry about interrupts here */
+	prev = atomic64_read(&event->hw.prev_count);
+	delta = (val - prev) & 0xfffffffful;
+	atomic64_add(delta, &event->count);
+
+	/*
+	 * See if the total period for this event has expired,
+	 * and update for the next period.
+	 */
+	val = 0;
+	left = atomic64_read(&event->hw.period_left) - delta;
+	if (period) {
+		if (left <= 0) {
+			left += period;
+			if (left <= 0)
+				left = period;
+			record = 1;
+		}
+		if (left < 0x80000000LL)
+			val = 0x80000000LL - left;
+	}
+
+	/*
+	 * Finally record data if requested.
+	 */
+	if (record) {
+		struct perf_sample_data data = {
+			.period	= event->hw.last_period,
+		};
+
+		if (perf_event_overflow(event, nmi, &data, regs)) {
+			/*
+			 * Interrupts are coming too fast - throttle them
+			 * by setting the event to 0, so it will be
+			 * at least 2^30 cycles until the next interrupt
+			 * (assuming each event counts at most 2 counts
+			 * per cycle).
+			 */
+			val = 0;
+			left = ~0ULL >> 1;
+		}
+	}
+
+	write_pmc(event->hw.idx, val);
+	atomic64_set(&event->hw.prev_count, val);
+	atomic64_set(&event->hw.period_left, left);
+	perf_event_update_userpage(event);
+}
+
+static void perf_event_interrupt(struct pt_regs *regs)
+{
+	int i;
+	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+	struct perf_event *event;
+	unsigned long val;
+	int found = 0;
+	int nmi;
+
+	nmi = perf_intr_is_nmi(regs);
+	if (nmi)
+		nmi_enter();
+	else
+		irq_enter();
+
+	for (i = 0; i < ppmu->n_counter; ++i) {
+		event = cpuhw->event[i];
+
+		val = read_pmc(i);
+		if ((int)val < 0) {
+			if (event) {
+				/* event has overflowed */
+				found = 1;
+				record_and_restart(event, val, regs, nmi);
+			} else {
+				/*
+				 * Disabled counter is negative,
+				 * reset it just in case.
+				 */
+				write_pmc(i, 0);
+			}
+		}
+	}
+
+	/* PMM will keep counters frozen until we return from the interrupt. */
+	mtmsr(mfmsr() | MSR_PMM);
+	mtpmr(PMRN_PMGC0, PMGC0_PMIE | PMGC0_FCECE);
+	isync();
+
+	if (nmi)
+		nmi_exit();
+	else
+		irq_exit();
+}
+
+void hw_perf_event_setup(int cpu)
+{
+	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
+
+	memset(cpuhw, 0, sizeof(*cpuhw));
+}
+
+int register_fsl_emb_pmu(struct fsl_emb_pmu *pmu)
+{
+	if (ppmu)
+		return -EBUSY;		/* something's already registered */
+
+	ppmu = pmu;
+	pr_info("%s performance monitor hardware support registered\n",
+		pmu->name);
+
+	return 0;
+}
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 43238b2..05131d6 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -43,6 +43,7 @@
 #include <asm/smp.h>
 #include <asm/system.h>
 #include <asm/mmu.h>
+#include <asm/paca.h>
 #include <asm/pgtable.h>
 #include <asm/pci.h>
 #include <asm/iommu.h>
@@ -721,6 +722,8 @@
 	 * FIXME .. and the initrd too? */
 	move_device_tree();
 
+	allocate_pacas();
+
 	DBG("Scanning CPUs ...\n");
 
 	/* Retreive CPU related informations from the flat tree
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index d9b0586..ed2cfe1 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -940,7 +940,7 @@
 {
 	switch (slot) {
 	case 1:
-		if (child->thread.iac1 == 0)
+		if ((child->thread.dbcr0 & DBCR0_IAC1) == 0)
 			return -ENOENT;
 
 		if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
@@ -952,7 +952,7 @@
 		child->thread.dbcr0 &= ~DBCR0_IAC1;
 		break;
 	case 2:
-		if (child->thread.iac2 == 0)
+		if ((child->thread.dbcr0 & DBCR0_IAC2) == 0)
 			return -ENOENT;
 
 		if (dbcr_iac_range(child) & DBCR_IAC12MODE)
@@ -963,7 +963,7 @@
 		break;
 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
 	case 3:
-		if (child->thread.iac3 == 0)
+		if ((child->thread.dbcr0 & DBCR0_IAC3) == 0)
 			return -ENOENT;
 
 		if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
@@ -975,7 +975,7 @@
 		child->thread.dbcr0 &= ~DBCR0_IAC3;
 		break;
 	case 4:
-		if (child->thread.iac4 == 0)
+		if ((child->thread.dbcr0 & DBCR0_IAC4) == 0)
 			return -ENOENT;
 
 		if (dbcr_iac_range(child) & DBCR_IAC34MODE)
@@ -1054,7 +1054,7 @@
 static int del_dac(struct task_struct *child, int slot)
 {
 	if (slot == 1) {
-		if (child->thread.dac1 == 0)
+		if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0)
 			return -ENOENT;
 
 		child->thread.dac1 = 0;
@@ -1070,7 +1070,7 @@
 		child->thread.dvc1 = 0;
 #endif
 	} else if (slot == 2) {
-		if (child->thread.dac1 == 0)
+		if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0)
 			return -ENOENT;
 
 #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 03dd6a2..48f0a00 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -36,6 +36,7 @@
 #include <linux/lmb.h>
 #include <linux/of_platform.h>
 #include <asm/io.h>
+#include <asm/paca.h>
 #include <asm/prom.h>
 #include <asm/processor.h>
 #include <asm/vdso_datapage.h>
@@ -493,6 +494,8 @@
 	 * here will have to be reworked
 	 */
 	cpu_init_thread_core_maps(nthreads);
+
+	free_unused_pacas();
 }
 #endif /* CONFIG_SMP */
 
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 6568406..6354739 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -144,9 +144,9 @@
 #endif /* CONFIG_SMP */
 
 /* Put the paca pointer into r13 and SPRG_PACA */
-void __init setup_paca(int cpu)
+static void __init setup_paca(struct paca_struct *new_paca)
 {
-	local_paca = &paca[cpu];
+	local_paca = new_paca;
 	mtspr(SPRN_SPRG_PACA, local_paca);
 #ifdef CONFIG_PPC_BOOK3E
 	mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
@@ -176,14 +176,12 @@
 {
 	/* -------- printk is _NOT_ safe to use here ! ------- */
 
-	/* Fill in any unititialised pacas */
-	initialise_pacas();
-
 	/* Identify CPU type */
 	identify_cpu(0, mfspr(SPRN_PVR));
 
 	/* Assume we're on cpu 0 for now. Don't write to the paca yet! */
-	setup_paca(0);
+	initialise_paca(&boot_paca, 0);
+	setup_paca(&boot_paca);
 
 	/* Initialize lockdep early or else spinlocks will blow */
 	lockdep_init();
@@ -203,7 +201,7 @@
 	early_init_devtree(__va(dt_ptr));
 
 	/* Now we know the logical id of our boot cpu, setup the paca. */
-	setup_paca(boot_cpuid);
+	setup_paca(&paca[boot_cpuid]);
 
 	/* Fix up paca fields required for the boot cpu */
 	get_paca()->cpu_start = 1;
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index 3370e62..f2496f2 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -42,100 +42,6 @@
 #include <asm/time.h>
 #include <asm/unistd.h>
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-int sys_ipc(uint call, int first, unsigned long second, long third,
-	    void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	ret = -ENOSYS;
-	switch (call) {
-	case SEMOP:
-		ret = sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      (unsigned)second, NULL);
-		break;
-	case SEMTIMEDOP:
-		ret = sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      (unsigned)second,
-				      (const struct timespec __user *) fifth);
-		break;
-	case SEMGET:
-		ret = sys_semget (first, (int)second, third);
-		break;
-	case SEMCTL: {
-		union semun fourth;
-
-		ret = -EINVAL;
-		if (!ptr)
-			break;
-		if ((ret = get_user(fourth.__pad, (void __user * __user *)ptr)))
-			break;
-		ret = sys_semctl(first, (int)second, third, fourth);
-		break;
-	}
-	case MSGSND:
-		ret = sys_msgsnd(first, (struct msgbuf __user *)ptr,
-				 (size_t)second, third);
-		break;
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-
-			ret = -EINVAL;
-			if (!ptr)
-				break;
-			if ((ret = copy_from_user(&tmp,
-						(struct ipc_kludge __user *) ptr,
-						sizeof (tmp)) ? -EFAULT : 0))
-				break;
-			ret = sys_msgrcv(first, tmp.msgp, (size_t) second,
-					  tmp.msgtyp, third);
-			break;
-		}
-		default:
-			ret = sys_msgrcv (first, (struct msgbuf __user *) ptr,
-					  (size_t)second, fifth, third);
-			break;
-		}
-		break;
-	case MSGGET:
-		ret = sys_msgget((key_t)first, (int)second);
-		break;
-	case MSGCTL:
-		ret = sys_msgctl(first, (int)second,
-				  (struct msqid_ds __user *)ptr);
-		break;
-	case SHMAT: {
-		ulong raddr;
-		ret = do_shmat(first, (char __user *)ptr, (int)second, &raddr);
-		if (ret)
-			break;
-		ret = put_user(raddr, (ulong __user *) third);
-		break;
-	}
-	case SHMDT:
-		ret = sys_shmdt((char __user *)ptr);
-		break;
-	case SHMGET:
-		ret = sys_shmget(first, (size_t)second, third);
-		break;
-	case SHMCTL:
-		ret = sys_shmctl(first, (int)second,
-				 (struct shmid_ds __user *)ptr);
-		break;
-	}
-
-	return ret;
-}
-
 static inline unsigned long do_mmap2(unsigned long addr, size_t len,
 			unsigned long prot, unsigned long flags,
 			unsigned long fd, unsigned long off, int shift)
@@ -210,76 +116,6 @@
 }
 #endif
 
-#ifdef CONFIG_PPC64
-#define OVERRIDE_MACHINE    (personality(current->personality) == PER_LINUX32)
-#else
-#define OVERRIDE_MACHINE    0
-#endif
-
-static inline int override_machine(char __user *mach)
-{
-	if (OVERRIDE_MACHINE) {
-		/* change ppc64 to ppc */
-		if (__put_user(0, mach+3) || __put_user(0, mach+4))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-long ppc_newuname(struct new_utsname __user * name)
-{
-	int err = 0;
-
-	down_read(&uts_sem);
-	if (copy_to_user(name, utsname(), sizeof(*name)))
-		err = -EFAULT;
-	up_read(&uts_sem);
-	if (!err)
-		err = override_machine(name->machine);
-	return err;
-}
-
-int sys_uname(struct old_utsname __user *name)
-{
-	int err = 0;
-	
-	down_read(&uts_sem);
-	if (copy_to_user(name, utsname(), sizeof(*name)))
-		err = -EFAULT;
-	up_read(&uts_sem);
-	if (!err)
-		err = override_machine(name->machine);
-	return err;
-}
-
-int sys_olduname(struct oldold_utsname __user *name)
-{
-	int error;
-
-	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
-		return -EFAULT;
-  
-	down_read(&uts_sem);
-	error = __copy_to_user(&name->sysname, &utsname()->sysname,
-			       __OLD_UTS_LEN);
-	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->release, &utsname()->release,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->release + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->version, &utsname()->version,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->version + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->machine, &utsname()->machine,
-				__OLD_UTS_LEN);
-	error |= override_machine(name->machine);
-	up_read(&uts_sem);
-
-	return error? -EFAULT: 0;
-}
-
 long ppc_fadvise64_64(int fd, int advice, u32 offset_high, u32 offset_low,
 		      u32 len_high, u32 len_low)
 {
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 4ec900a..b1dbd9e 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -47,7 +47,7 @@
 #include "mmu_decl.h"
 
 #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
-/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */
+/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
 #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
 #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
 #endif
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 6f8ebe1..072b948 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -553,7 +553,7 @@
 	return 0;
 }
 
-static struct watchdog_info mpc5200_wdt_info = {
+static const struct watchdog_info mpc5200_wdt_info = {
 	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	.identity	= WDT_IDENTITY,
 };
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index 9d962d7..d4a09f8 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -24,7 +24,7 @@
 
 #include "pq2.h"
 
-static DEFINE_SPINLOCK(pci_pic_lock);
+static DEFINE_RAW_SPINLOCK(pci_pic_lock);
 
 struct pq2ads_pci_pic {
 	struct device_node *node;
@@ -45,12 +45,12 @@
 
 	if (irq != -1) {
 		unsigned long flags;
-		spin_lock_irqsave(&pci_pic_lock, flags);
+		raw_spin_lock_irqsave(&pci_pic_lock, flags);
 
 		setbits32(&priv->regs->mask, 1 << irq);
 		mb();
 
-		spin_unlock_irqrestore(&pci_pic_lock, flags);
+		raw_spin_unlock_irqrestore(&pci_pic_lock, flags);
 	}
 }
 
@@ -62,9 +62,9 @@
 	if (irq != -1) {
 		unsigned long flags;
 
-		spin_lock_irqsave(&pci_pic_lock, flags);
+		raw_spin_lock_irqsave(&pci_pic_lock, flags);
 		clrbits32(&priv->regs->mask, 1 << irq);
-		spin_unlock_irqrestore(&pci_pic_lock, flags);
+		raw_spin_unlock_irqrestore(&pci_pic_lock, flags);
 	}
 }
 
diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
index 42e87f0..d48527f 100644
--- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
+++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -50,7 +50,7 @@
 
 #define socrates_fpga_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
 
-static DEFINE_SPINLOCK(socrates_fpga_pic_lock);
+static DEFINE_RAW_SPINLOCK(socrates_fpga_pic_lock);
 
 static void __iomem *socrates_fpga_pic_iobase;
 static struct irq_host *socrates_fpga_pic_irq_host;
@@ -80,9 +80,9 @@
 	if (i == 3)
 		return NO_IRQ;
 
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	cause = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(i));
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 	for (i = SOCRATES_FPGA_NUM_IRQS - 1; i >= 0; i--) {
 		if (cause >> (i + 16))
 			break;
@@ -116,12 +116,12 @@
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask |= (1 << (hwirq + 16));
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static void socrates_fpga_pic_mask(unsigned int virq)
@@ -134,12 +134,12 @@
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask &= ~(1 << hwirq);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static void socrates_fpga_pic_mask_ack(unsigned int virq)
@@ -152,13 +152,13 @@
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask &= ~(1 << hwirq);
 	mask |= (1 << (hwirq + 16));
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static void socrates_fpga_pic_unmask(unsigned int virq)
@@ -171,12 +171,12 @@
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask |= (1 << hwirq);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static void socrates_fpga_pic_eoi(unsigned int virq)
@@ -189,12 +189,12 @@
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask |= (1 << (hwirq + 16));
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static int socrates_fpga_pic_set_type(unsigned int virq,
@@ -220,14 +220,14 @@
 	default:
 		return -EINVAL;
 	}
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQCFG);
 	if (polarity)
 		mask |= (1 << hwirq);
 	else
 		mask &= ~(1 << hwirq);
 	socrates_fpga_pic_write(FPGA_PIC_IRQCFG, mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 	return 0;
 }
 
@@ -314,14 +314,14 @@
 
 	socrates_fpga_pic_iobase = of_iomap(pic, 0);
 
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(0),
 			SOCRATES_FPGA_IRQ_MASK << 16);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(1),
 			SOCRATES_FPGA_IRQ_MASK << 16);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(2),
 			SOCRATES_FPGA_IRQ_MASK << 16);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 
 	pr_info("FPGA PIC: Setting up Socrates FPGA PIC\n");
 }
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 2bbfd53..fbe9f36 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -33,32 +33,32 @@
 	  This option enables support for the MPC8610 HPCD board.
 
 config GEF_PPC9A
-	bool "GE Fanuc PPC9A"
+	bool "GE PPC9A"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
-	  This option enables support for GE Fanuc's PPC9A.
+	  This option enables support for the GE PPC9A.
 
 config GEF_SBC310
-	bool "GE Fanuc SBC310"
+	bool "GE SBC310"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
-	  This option enables support for GE Fanuc's SBC310.
+	  This option enables support for the GE SBC310.
 
 config GEF_SBC610
-	bool "GE Fanuc SBC610"
+	bool "GE SBC610"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	select HAS_RAPIDIO
 	help
-	  This option enables support for GE Fanuc's SBC610.
+	  This option enables support for the GE SBC610.
 
 endif
 
diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c
index b2ea887..11f7b2b 100644
--- a/arch/powerpc/platforms/86xx/gef_gpio.c
+++ b/arch/powerpc/platforms/86xx/gef_gpio.c
@@ -1,9 +1,9 @@
 /*
- * Driver for GE Fanuc's FPGA based GPIO pins
+ * Driver for GE FPGA based GPIO
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -164,6 +164,6 @@
 };
 arch_initcall(gef_gpio_init);
 
-MODULE_DESCRIPTION("GE Fanuc I/O FPGA GPIO driver");
-MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com");
+MODULE_DESCRIPTION("GE I/O FPGA GPIO driver");
+MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com");
 MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c
index 0110a87..6df9e25 100644
--- a/arch/powerpc/platforms/86xx/gef_pic.c
+++ b/arch/powerpc/platforms/86xx/gef_pic.c
@@ -1,9 +1,9 @@
 /*
- * Interrupt handling for GE Fanuc's FPGA based PIC
+ * Interrupt handling for GE FPGA based PIC
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -49,7 +49,7 @@
 #define gef_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
 
 
-static DEFINE_SPINLOCK(gef_pic_lock);
+static DEFINE_RAW_SPINLOCK(gef_pic_lock);
 
 static void __iomem *gef_pic_irq_reg_base;
 static struct irq_host *gef_pic_irq_host;
@@ -118,11 +118,11 @@
 
 	hwirq = gef_irq_to_hw(virq);
 
-	spin_lock_irqsave(&gef_pic_lock, flags);
+	raw_spin_lock_irqsave(&gef_pic_lock, flags);
 	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
 	mask &= ~(1 << hwirq);
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
-	spin_unlock_irqrestore(&gef_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
 }
 
 static void gef_pic_mask_ack(unsigned int virq)
@@ -141,11 +141,11 @@
 
 	hwirq = gef_irq_to_hw(virq);
 
-	spin_lock_irqsave(&gef_pic_lock, flags);
+	raw_spin_lock_irqsave(&gef_pic_lock, flags);
 	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
 	mask |= (1 << hwirq);
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
-	spin_unlock_irqrestore(&gef_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
 }
 
 static struct irq_chip gef_pic_chip = {
@@ -199,7 +199,7 @@
 	/* Map the devices registers into memory */
 	gef_pic_irq_reg_base = of_iomap(np, 0);
 
-	spin_lock_irqsave(&gef_pic_lock, flags);
+	raw_spin_lock_irqsave(&gef_pic_lock, flags);
 
 	/* Initialise everything as masked. */
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0);
@@ -208,7 +208,7 @@
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0);
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0);
 
-	spin_unlock_irqrestore(&gef_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
 
 	/* Map controller */
 	gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index a792e5d..60ce07e 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc PPC9A board support
+ * GE PPC9A board support
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -82,7 +82,7 @@
 	}
 #endif
 
-	printk(KERN_INFO "GE Fanuc Intelligent Platforms PPC9A 6U VME SBC\n");
+	printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
@@ -151,7 +151,7 @@
 {
 	uint svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 
 	seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(),
 		('A' + gef_ppc9a_get_board_rev()));
@@ -235,7 +235,7 @@
 machine_device_initcall(gef_ppc9a, declare_of_platform_devices);
 
 define_machine(gef_ppc9a) {
-	.name			= "GE Fanuc PPC9A",
+	.name			= "GE PPC9A",
 	.probe			= gef_ppc9a_probe,
 	.setup_arch		= gef_ppc9a_setup_arch,
 	.init_IRQ		= gef_ppc9a_init_irq,
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 6a1a613..3ecee25 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc SBC310 board support
+ * GE SBC310 board support
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -82,7 +82,7 @@
 	}
 #endif
 
-	printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC310 6U VPX SBC\n");
+	printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
@@ -142,7 +142,7 @@
 {
 	uint svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 
 	seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id());
 	seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(),
@@ -223,7 +223,7 @@
 machine_device_initcall(gef_sbc310, declare_of_platform_devices);
 
 define_machine(gef_sbc310) {
-	.name			= "GE Fanuc SBC310",
+	.name			= "GE SBC310",
 	.probe			= gef_sbc310_probe,
 	.setup_arch		= gef_sbc310_setup_arch,
 	.init_IRQ		= gef_sbc310_init_irq,
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index e10688a..5090d608 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc SBC610 board support
+ * GE SBC610 board support
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -82,7 +82,7 @@
 	}
 #endif
 
-	printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n");
+	printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
@@ -133,7 +133,7 @@
 {
 	uint svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 
 	seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
 		('A' + gef_sbc610_get_board_rev() - 1));
@@ -212,7 +212,7 @@
 machine_device_initcall(gef_sbc610, declare_of_platform_devices);
 
 define_machine(gef_sbc610) {
-	.name			= "GE Fanuc SBC610",
+	.name			= "GE SBC610",
 	.probe			= gef_sbc610_probe,
 	.setup_arch		= gef_sbc610_setup_arch,
 	.init_IRQ		= gef_sbc610_init_irq,
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index fa0f690..a8aae0b 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -144,6 +144,16 @@
 	  and some e300 cores (c3 and c4).  Select this only if your
 	  core supports the Embedded Performance Monitor APU
 
+config FSL_EMB_PERF_EVENT
+	bool
+	depends on FSL_EMB_PERFMON && PERF_EVENTS && !PPC_PERF_CTRS
+	default y
+
+config FSL_EMB_PERF_EVENT_E500
+	bool
+	depends on FSL_EMB_PERF_EVENT && E500
+	default y
+
 config 4xx
 	bool
 	depends on 40x || 44x
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 5369653..fba5bf9 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -43,17 +43,14 @@
 	LOAD_REG_ADDR(r23, alpaca)
 	li	r0,ALPACA_SIZE
 	sub	r23,r13,r23
-	divdu	r23,r23,r0		/* r23 has cpu number */
-	LOAD_REG_ADDR(r13, paca)
-	mulli	r0,r23,PACA_SIZE
-	add	r13,r13,r0
-	mtspr	SPRN_SPRG_PACA,r13	/* Save it away for the future */
-	mfmsr	r24
-	ori	r24,r24,MSR_RI
-	mtmsrd	r24			/* RI on */
-	mr	r24,r23
+	divdu	r24,r23,r0		/* r24 has cpu number */
 	cmpwi	0,r24,0			/* Are we processor 0? */
 	bne	1f
+	LOAD_REG_ADDR(r13, boot_paca)
+	mtspr	SPRN_SPRG_PACA,r13	/* Save it away for the future */
+	mfmsr	r23
+	ori	r23,r23,MSR_RI
+	mtmsrd	r23			/* RI on */
 	b	.__start_initialization_iSeries	/* Start up the first processor */
 1:	mfspr	r4,SPRN_CTRLF
 	li	r5,CTRL_RUNLATCH	/* Turn off the run light */
@@ -86,6 +83,16 @@
 #endif
 
 2:
+	/* Load our paca now that it's been allocated */
+	LOAD_REG_ADDR(r13, paca)
+	ld	r13,0(r13)
+	mulli	r0,r24,PACA_SIZE
+	add	r13,r13,r0
+	mtspr	SPRN_SPRG_PACA,r13	/* Save it away for the future */
+	mfmsr	r23
+	ori	r23,r23,MSR_RI
+	mtmsrd	r23			/* RI on */
+
 	HMT_LOW
 #ifdef CONFIG_SMP
 	lbz	r23,PACAPROCSTART(r13)	/* Test if this processor
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index d1b124e..a8e1d5d 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -122,44 +122,32 @@
 		if (!get_lppaca()->shared_proc)
 			get_lppaca()->donate_dedicated_cpu = 1;
 
-		printk(KERN_INFO
-			"cpu %u (hwid %u) ceding for offline with hint %d\n",
-			cpu, hwcpu, cede_latency_hint);
 		while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
 			extended_cede_processor(cede_latency_hint);
-			printk(KERN_INFO "cpu %u (hwid %u) returned from cede.\n",
-				cpu, hwcpu);
-			printk(KERN_INFO
-			"Decrementer value = %x Timebase value = %llx\n",
-			get_dec(), get_tb());
 		}
 
-		printk(KERN_INFO "cpu %u (hwid %u) got prodded to go online\n",
-			cpu, hwcpu);
-
 		if (!get_lppaca()->shared_proc)
 			get_lppaca()->donate_dedicated_cpu = 0;
 		get_lppaca()->idle = 0;
+
+		if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) {
+			unregister_slb_shadow(hwcpu, __pa(get_slb_shadow()));
+
+			/*
+			 * Call to start_secondary_resume() will not return.
+			 * Kernel stack will be reset and start_secondary()
+			 * will be called to continue the online operation.
+			 */
+			start_secondary_resume();
+		}
 	}
 
-	if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) {
-		unregister_slb_shadow(hwcpu, __pa(get_slb_shadow()));
+	/* Requested state is CPU_STATE_OFFLINE at this point */
+	WARN_ON(get_preferred_offline_state(cpu) != CPU_STATE_OFFLINE);
 
-		/*
-		 * NOTE: Calling start_secondary() here for now to
-		 * start new context.
-		 * However, need to do it cleanly by resetting the
-		 * stack pointer.
-		 */
-		start_secondary();
-
-	} else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) {
-
-		set_cpu_current_state(cpu, CPU_STATE_OFFLINE);
-		unregister_slb_shadow(hard_smp_processor_id(),
-					__pa(get_slb_shadow()));
-		rtas_stop_self();
-	}
+	set_cpu_current_state(cpu, CPU_STATE_OFFLINE);
+	unregister_slb_shadow(hwcpu, __pa(get_slb_shadow()));
+	rtas_stop_self();
 
 	/* Should never get here... */
 	BUG();
diff --git a/arch/powerpc/platforms/pseries/offline_states.h b/arch/powerpc/platforms/pseries/offline_states.h
index 22574e0..75a6f480 100644
--- a/arch/powerpc/platforms/pseries/offline_states.h
+++ b/arch/powerpc/platforms/pseries/offline_states.h
@@ -9,10 +9,31 @@
 	CPU_MAX_OFFLINE_STATES
 };
 
+#ifdef CONFIG_HOTPLUG_CPU
 extern enum cpu_state_vals get_cpu_current_state(int cpu);
 extern void set_cpu_current_state(int cpu, enum cpu_state_vals state);
-extern enum cpu_state_vals get_preferred_offline_state(int cpu);
 extern void set_preferred_offline_state(int cpu, enum cpu_state_vals state);
 extern void set_default_offline_state(int cpu);
+#else
+static inline enum cpu_state_vals get_cpu_current_state(int cpu)
+{
+	return CPU_STATE_ONLINE;
+}
+
+static inline void set_cpu_current_state(int cpu, enum cpu_state_vals state)
+{
+}
+
+static inline void set_preferred_offline_state(int cpu, enum cpu_state_vals state)
+{
+}
+
+static inline void set_default_offline_state(int cpu)
+{
+}
+#endif
+
+extern enum cpu_state_vals get_preferred_offline_state(int cpu);
 extern int start_secondary(void);
+extern void start_secondary_resume(void);
 #endif
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index 0603c91..a05f8d4 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -259,12 +259,12 @@
 	return plpar_hcall_norets(H_IPI, servernum, mfrr);
 }
 
-static inline long plpar_xirr(unsigned long *xirr_ret)
+static inline long plpar_xirr(unsigned long *xirr_ret, unsigned char cppr)
 {
 	long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 
-	rc = plpar_hcall(H_XIRR, retbuf);
+	rc = plpar_hcall(H_XIRR, retbuf, cppr);
 
 	*xirr_ret = retbuf[0];
 
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 4ca6410..1bcedd8 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -120,12 +120,12 @@
 
 /* LPAR low level accessors */
 
-static inline unsigned int lpar_xirr_info_get(void)
+static inline unsigned int lpar_xirr_info_get(unsigned char cppr)
 {
 	unsigned long lpar_rc;
 	unsigned long return_value;
 
-	lpar_rc = plpar_xirr(&return_value);
+	lpar_rc = plpar_xirr(&return_value, cppr);
 	if (lpar_rc != H_SUCCESS)
 		panic(" bad return code xirr - rc = %lx\n", lpar_rc);
 	return (unsigned int)return_value;
@@ -331,7 +331,8 @@
 
 static unsigned int xics_get_irq_lpar(void)
 {
-	unsigned int xirr = lpar_xirr_info_get();
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+	unsigned int xirr = lpar_xirr_info_get(os_cppr->stack[os_cppr->index]);
 	unsigned int vec = xics_xirr_vector(xirr);
 	unsigned int irq;
 
diff --git a/arch/powerpc/sysdev/cpm2_pic.h b/arch/powerpc/sysdev/cpm2_pic.h
index 30e5828..2c5f70c 100644
--- a/arch/powerpc/sysdev/cpm2_pic.h
+++ b/arch/powerpc/sysdev/cpm2_pic.h
@@ -3,6 +3,6 @@
 
 extern unsigned int cpm2_get_irq(void);
 
-extern void cpm2_pic_init(struct device_node*);
+extern void cpm2_pic_init(struct device_node *);
 
 #endif /* _PPC_KERNEL_CPM2_H */
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index d927da8..541ba98 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -33,7 +33,7 @@
 
 #include "qe_ic.h"
 
-static DEFINE_SPINLOCK(qe_ic_lock);
+static DEFINE_RAW_SPINLOCK(qe_ic_lock);
 
 static struct qe_ic_info qe_ic_info[] = {
 	[1] = {
@@ -201,13 +201,13 @@
 	unsigned long flags;
 	u32 temp;
 
-	spin_lock_irqsave(&qe_ic_lock, flags);
+	raw_spin_lock_irqsave(&qe_ic_lock, flags);
 
 	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
 	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
 		    temp | qe_ic_info[src].mask);
 
-	spin_unlock_irqrestore(&qe_ic_lock, flags);
+	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
 }
 
 static void qe_ic_mask_irq(unsigned int virq)
@@ -217,7 +217,7 @@
 	unsigned long flags;
 	u32 temp;
 
-	spin_lock_irqsave(&qe_ic_lock, flags);
+	raw_spin_lock_irqsave(&qe_ic_lock, flags);
 
 	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
 	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
@@ -233,7 +233,7 @@
 	 */
 	mb();
 
-	spin_unlock_irqrestore(&qe_ic_lock, flags);
+	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
 }
 
 static struct irq_chip qe_ic_irq_chip = {
diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c
index 7903ec4..f42dbab 100644
--- a/arch/s390/crypto/sha_common.c
+++ b/arch/s390/crypto/sha_common.c
@@ -79,7 +79,7 @@
 	memset(ctx->buf + index, 0x00, end - index - 8);
 
 	/*
-	 * Append message length. Well, SHA-512 wants a 128 bit lenght value,
+	 * Append message length. Well, SHA-512 wants a 128 bit length value,
 	 * nevertheless we use u64, should be enough for now...
 	 */
 	bits = ctx->count * 8;
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index e85679a..e34347d 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -20,7 +20,7 @@
 /**
  * struct ccw1 - channel command word
  * @cmd_code: command code
- * @flags: flags, like IDA adressing, etc.
+ * @flags: flags, like IDA addressing, etc.
  * @count: byte count
  * @cda: data address
  *
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index 01a0802..104f200 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -35,7 +35,8 @@
 
 extern long psw32_user_bits;
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"s390\0\0\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index dd2d913..fef9b33 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -489,9 +489,6 @@
  * These are defined as per linux/ptrace.h, which see.
  */
 #define arch_has_single_step()	(1)
-struct task_struct;
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
 extern void show_regs(struct pt_regs * regs);
 
 #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h
index c666bfe..9b04b11 100644
--- a/arch/s390/include/asm/qdio.h
+++ b/arch/s390/include/asm/qdio.h
@@ -321,11 +321,6 @@
 #define QDIO_ERROR_ACTIVATE_CHECK_CONDITION	0x40
 #define QDIO_ERROR_SLSB_STATE			0x80
 
-/* for qdio_initialize */
-#define QDIO_INBOUND_0COPY_SBALS		0x01
-#define QDIO_OUTBOUND_0COPY_SBALS		0x02
-#define QDIO_USE_OUTBOUND_PCIS			0x04
-
 /* for qdio_cleanup */
 #define QDIO_FLAG_CLEANUP_USING_CLEAR		0x01
 #define QDIO_FLAG_CLEANUP_USING_HALT		0x02
@@ -344,7 +339,6 @@
  * @input_handler: handler to be called for input queues
  * @output_handler: handler to be called for output queues
  * @int_parm: interruption parameter
- * @flags: initialization flags
  * @input_sbal_addr_array:  address of no_input_qs * 128 pointers
  * @output_sbal_addr_array: address of no_output_qs * 128 pointers
  */
@@ -361,7 +355,6 @@
 	qdio_handler_t *input_handler;
 	qdio_handler_t *output_handler;
 	unsigned long int_parm;
-	unsigned long flags;
 	void **input_sbal_addr_array;
 	void **output_sbal_addr_array;
 };
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index 6e9f049..5f00751 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -392,6 +392,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_MMAP
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 30de2d0..672ce52 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -547,7 +547,7 @@
 	.globl	sys32_newuname_wrapper
 sys32_newuname_wrapper:
 	llgtr	%r2,%r2			# struct new_utsname *
-	jg	sys_s390_newuname	# branch to system call
+	jg	sys_newuname		# branch to system call
 
 	.globl	compat_sys_adjtimex_wrapper
 compat_sys_adjtimex_wrapper:
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
index e1e5e76..eb15c12 100644
--- a/arch/s390/kernel/entry.h
+++ b/arch/s390/kernel/entry.h
@@ -24,17 +24,13 @@
 void __init startup_init(void);
 void die(const char * str, struct pt_regs * regs, long err);
 
-struct new_utsname;
-struct mmap_arg_struct;
+struct s390_mmap_arg_struct;
 struct fadvise64_64_args;
 struct old_sigaction;
-struct sel_arg_struct;
 
-long sys_mmap2(struct mmap_arg_struct __user  *arg);
-long sys_s390_old_mmap(struct mmap_arg_struct __user *arg);
-long sys_ipc(uint call, int first, unsigned long second,
+long sys_mmap2(struct s390_mmap_arg_struct __user  *arg);
+long sys_s390_ipc(uint call, int first, unsigned long second,
 	     unsigned long third, void __user *ptr);
-long sys_s390_newuname(struct new_utsname __user *name);
 long sys_s390_personality(unsigned long personality);
 long sys_s390_fadvise64(int fd, u32 offset_high, u32 offset_low,
 		    size_t len, int advice);
diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S
index 27af3bf..2e82fdd 100644
--- a/arch/s390/kernel/sclp.S
+++ b/arch/s390/kernel/sclp.S
@@ -235,7 +235,7 @@
 	lh	%r9,0(%r8)			# update sccb length
 	ar	%r9,%r6
 	sth	%r9,0(%r8)
-	ar	%r7,%r6				# update current mto adress
+	ar	%r7,%r6				# update current mto address
 	ltr	%r0,%r0				# more characters?
 	jnz	.LinitmtoS4
 	l	%r2,.LwritedataS4-.LbaseS4(%r13)# write data
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 8b10127..29f65bc 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -1020,7 +1020,9 @@
 	return rc;
 }
 
-static ssize_t __ref rescan_store(struct sysdev_class *class, const char *buf,
+static ssize_t __ref rescan_store(struct sysdev_class *class,
+				  struct sysdev_class_attribute *attr,
+				  const char *buf,
 				  size_t count)
 {
 	int rc;
@@ -1031,7 +1033,9 @@
 static SYSDEV_CLASS_ATTR(rescan, 0200, NULL, rescan_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t dispatching_show(struct sysdev_class *class, char *buf)
+static ssize_t dispatching_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	ssize_t count;
 
@@ -1041,7 +1045,9 @@
 	return count;
 }
 
-static ssize_t dispatching_store(struct sysdev_class *dev, const char *buf,
+static ssize_t dispatching_store(struct sysdev_class *dev,
+				 struct sysdev_class_attribute *attr,
+				 const char *buf,
 				 size_t count)
 {
 	int val, rc;
diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index 86a74c9..7b6b0f8 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -33,13 +33,12 @@
 #include "entry.h"
 
 /*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux for S/390 isn't able to handle more than 5
- * system call parameters, so these system calls used a memory
- * block for parameter passing..
+ * Perform the mmap() system call. Linux for S/390 isn't able to handle more
+ * than 5 system call parameters, so this system call uses a memory block
+ * for parameter passing.
  */
 
-struct mmap_arg_struct {
+struct s390_mmap_arg_struct {
 	unsigned long addr;
 	unsigned long len;
 	unsigned long prot;
@@ -48,9 +47,9 @@
 	unsigned long offset;
 };
 
-SYSCALL_DEFINE1(mmap2, struct mmap_arg_struct __user *, arg)
+SYSCALL_DEFINE1(mmap2, struct s390_mmap_arg_struct __user *, arg)
 {
-	struct mmap_arg_struct a;
+	struct s390_mmap_arg_struct a;
 	int error = -EFAULT;
 
 	if (copy_from_user(&a, arg, sizeof(a)))
@@ -60,29 +59,12 @@
 	return error;
 }
 
-SYSCALL_DEFINE1(s390_old_mmap, struct mmap_arg_struct __user *, arg)
-{
-	struct mmap_arg_struct a;
-	long error = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
 /*
  * sys_ipc() is the de-multiplexer for the SysV IPC calls..
  *
  * This is really horribly ugly.
  */
-SYSCALL_DEFINE5(ipc, uint, call, int, first, unsigned long, second,
+SYSCALL_DEFINE5(s390_ipc, uint, call, int, first, unsigned long, second,
 		unsigned long, third, void __user *, ptr)
 {
         struct ipc_kludge tmp;
@@ -149,17 +131,6 @@
 }
 
 #ifdef CONFIG_64BIT
-SYSCALL_DEFINE1(s390_newuname, struct new_utsname __user *, name)
-{
-	int ret = sys_newuname(name);
-
-	if (personality(current->personality) == PER_LINUX32 && !ret) {
-		ret = copy_to_user(name->machine, "s390\0\0\0\0", 8);
-		if (ret) ret = -EFAULT;
-	}
-	return ret;
-}
-
 SYSCALL_DEFINE1(s390_personality, unsigned long, personality)
 {
 	int ret;
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 30eca07..201ce6b 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -98,7 +98,7 @@
 SYSCALL(sys_swapon,sys_swapon,sys32_swapon_wrapper)
 SYSCALL(sys_reboot,sys_reboot,sys32_reboot_wrapper)
 SYSCALL(sys_ni_syscall,sys_ni_syscall,old32_readdir_wrapper)	/* old readdir syscall */
-SYSCALL(sys_s390_old_mmap,sys_s390_old_mmap,old32_mmap_wrapper)	/* 90 */
+SYSCALL(sys_old_mmap,sys_old_mmap,old32_mmap_wrapper)		/* 90 */
 SYSCALL(sys_munmap,sys_munmap,sys32_munmap_wrapper)
 SYSCALL(sys_truncate,sys_truncate,sys32_truncate_wrapper)
 SYSCALL(sys_ftruncate,sys_ftruncate,sys32_ftruncate_wrapper)
@@ -125,12 +125,12 @@
 SYSCALL(sys_wait4,sys_wait4,compat_sys_wait4_wrapper)
 SYSCALL(sys_swapoff,sys_swapoff,sys32_swapoff_wrapper)		/* 115 */
 SYSCALL(sys_sysinfo,sys_sysinfo,compat_sys_sysinfo_wrapper)
-SYSCALL(sys_ipc,sys_ipc,sys32_ipc_wrapper)
+SYSCALL(sys_s390_ipc,sys_s390_ipc,sys32_ipc_wrapper)
 SYSCALL(sys_fsync,sys_fsync,sys32_fsync_wrapper)
 SYSCALL(sys_sigreturn,sys_sigreturn,sys32_sigreturn)
 SYSCALL(sys_clone,sys_clone,sys_clone_wrapper)			/* 120 */
 SYSCALL(sys_setdomainname,sys_setdomainname,sys32_setdomainname_wrapper)
-SYSCALL(sys_newuname,sys_s390_newuname,sys32_newuname_wrapper)
+SYSCALL(sys_newuname,sys_newuname,sys32_newuname_wrapper)
 NI_SYSCALL							/* modify_ldt for i386 */
 SYSCALL(sys_adjtimex,sys_adjtimex,compat_sys_adjtimex_wrapper)
 SYSCALL(sys_mprotect,sys_mprotect,sys32_mprotect_wrapper)	/* 125 */
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index a8f93f1..aa2483e 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -73,15 +73,15 @@
 }
 EXPORT_SYMBOL(monotonic_clock);
 
-void tod_to_timeval(__u64 todval, struct timespec *xtime)
+void tod_to_timeval(__u64 todval, struct timespec *xt)
 {
 	unsigned long long sec;
 
 	sec = todval >> 12;
 	do_div(sec, 1000000);
-	xtime->tv_sec = sec;
+	xt->tv_sec = sec;
 	todval -= (sec * 1000000) << 12;
-	xtime->tv_nsec = ((todval * 1000) >> 12);
+	xt->tv_nsec = ((todval * 1000) >> 12);
 }
 EXPORT_SYMBOL(tod_to_timeval);
 
@@ -216,8 +216,8 @@
 	++vdso_data->tb_update_count;
 	smp_wmb();
 	vdso_data->xtime_tod_stamp = clock->cycle_last;
-	vdso_data->xtime_clock_sec = xtime.tv_sec;
-	vdso_data->xtime_clock_nsec = xtime.tv_nsec;
+	vdso_data->xtime_clock_sec = wall_time->tv_sec;
+	vdso_data->xtime_clock_nsec = wall_time->tv_nsec;
 	vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
 	vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
 	smp_wmb();
@@ -1116,14 +1116,18 @@
 /*
  * ETR class attributes
  */
-static ssize_t etr_stepping_port_show(struct sysdev_class *class, char *buf)
+static ssize_t etr_stepping_port_show(struct sysdev_class *class,
+					struct sysdev_class_attribute *attr,
+					char *buf)
 {
 	return sprintf(buf, "%i\n", etr_port0.esw.p);
 }
 
 static SYSDEV_CLASS_ATTR(stepping_port, 0400, etr_stepping_port_show, NULL);
 
-static ssize_t etr_stepping_mode_show(struct sysdev_class *class, char *buf)
+static ssize_t etr_stepping_mode_show(struct sysdev_class *class,
+				      	struct sysdev_class_attribute *attr,
+					char *buf)
 {
 	char *mode_str;
 
@@ -1584,7 +1588,9 @@
 	.name	= "stp",
 };
 
-static ssize_t stp_ctn_id_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_ctn_id_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1594,7 +1600,9 @@
 
 static SYSDEV_CLASS_ATTR(ctn_id, 0400, stp_ctn_id_show, NULL);
 
-static ssize_t stp_ctn_type_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_ctn_type_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1603,7 +1611,9 @@
 
 static SYSDEV_CLASS_ATTR(ctn_type, 0400, stp_ctn_type_show, NULL);
 
-static ssize_t stp_dst_offset_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_dst_offset_show(struct sysdev_class *class,
+				   struct sysdev_class_attribute *attr,
+				   char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x2000))
 		return -ENODATA;
@@ -1612,7 +1622,9 @@
 
 static SYSDEV_CLASS_ATTR(dst_offset, 0400, stp_dst_offset_show, NULL);
 
-static ssize_t stp_leap_seconds_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_leap_seconds_show(struct sysdev_class *class,
+					struct sysdev_class_attribute *attr,
+					char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x8000))
 		return -ENODATA;
@@ -1621,7 +1633,9 @@
 
 static SYSDEV_CLASS_ATTR(leap_seconds, 0400, stp_leap_seconds_show, NULL);
 
-static ssize_t stp_stratum_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_stratum_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1630,7 +1644,9 @@
 
 static SYSDEV_CLASS_ATTR(stratum, 0400, stp_stratum_show, NULL);
 
-static ssize_t stp_time_offset_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_time_offset_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x0800))
 		return -ENODATA;
@@ -1639,7 +1655,9 @@
 
 static SYSDEV_CLASS_ATTR(time_offset, 0400, stp_time_offset_show, NULL);
 
-static ssize_t stp_time_zone_offset_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_time_zone_offset_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x4000))
 		return -ENODATA;
@@ -1649,7 +1667,9 @@
 static SYSDEV_CLASS_ATTR(time_zone_offset, 0400,
 			 stp_time_zone_offset_show, NULL);
 
-static ssize_t stp_timing_mode_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_timing_mode_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1658,7 +1678,9 @@
 
 static SYSDEV_CLASS_ATTR(timing_mode, 0400, stp_timing_mode_show, NULL);
 
-static ssize_t stp_timing_state_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_timing_state_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1667,12 +1689,15 @@
 
 static SYSDEV_CLASS_ATTR(timing_state, 0400, stp_timing_state_show, NULL);
 
-static ssize_t stp_online_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_online_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	return sprintf(buf, "%i\n", stp_online);
 }
 
 static ssize_t stp_online_store(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
 				const char *buf, size_t count)
 {
 	unsigned int value;
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index cd54a1c..761ab8b 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -2,7 +2,8 @@
 # Makefile for s390-specific library files..
 #
 
-lib-y += delay.o string.o uaccess_std.o uaccess_pt.o usercopy.o
+lib-y += delay.o string.o uaccess_std.o uaccess_pt.o
+obj-y += usercopy.o
 obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o
 lib-$(CONFIG_64BIT) += uaccess_mvcos.o
 lib-$(CONFIG_SMP) += spinlock.o
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index 76a3637..f16bd04 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -374,7 +374,7 @@
 #ifdef CONFIG_CMM_IUCV
 #define SMSG_PREFIX "CMM"
 static void
-cmm_smsg_target(char *from, char *msg)
+cmm_smsg_target(const char *from, char *msg)
 {
 	long nr, seconds;
 
diff --git a/arch/score/include/asm/ptrace.h b/arch/score/include/asm/ptrace.h
index d40e691..e89dc9b 100644
--- a/arch/score/include/asm/ptrace.h
+++ b/arch/score/include/asm/ptrace.h
@@ -90,8 +90,7 @@
 			 unsigned short *);
 
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_SCORE_PTRACE_H */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 05cef50..8d90564 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -183,6 +183,9 @@
 config DMA_NONCOHERENT
 	def_bool !DMA_COHERENT
 
+config NEED_DMA_MAP_STATE
+	def_bool DMA_NONCOHERENT
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index 1042f7f..8bd952f 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -83,25 +83,6 @@
  */
 #define PCI_DMA_BUS_IS_PHYS	(dma_ops->is_phys)
 
-/* pci_unmap_{single,page} being a nop depends upon the
- * configuration.
- */
-#ifdef CONFIG_DMA_NONCOHERENT
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
-#else
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-#endif
-
 #ifdef CONFIG_PCI
 /*
  * None of the SH PCI controllers support MWI, it is always treated as a
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
index e11b14e..2168fde 100644
--- a/arch/sh/include/asm/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
@@ -123,8 +123,6 @@
 struct task_struct;
 
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
 
 struct perf_event;
 struct perf_sample_data;
diff --git a/arch/sh/include/asm/syscalls.h b/arch/sh/include/asm/syscalls.h
index c1e2b8d..507725a 100644
--- a/arch/sh/include/asm/syscalls.h
+++ b/arch/sh/include/asm/syscalls.h
@@ -3,17 +3,12 @@
 
 #ifdef __KERNEL__
 
-struct old_utsname;
-
 asmlinkage int old_mmap(unsigned long addr, unsigned long len,
 			unsigned long prot, unsigned long flags,
 			int fd, unsigned long off);
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 			  unsigned long prot, unsigned long flags,
 			  unsigned long fd, unsigned long pgoff);
-asmlinkage int sys_ipc(uint call, int first, int second,
-		       int third, void __user *ptr, long fifth);
-asmlinkage int sys_uname(struct old_utsname __user *name);
 
 #ifdef CONFIG_SUPERH32
 # include "syscalls_32.h"
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index 365744b..0e7f0fc 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -358,6 +358,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -370,6 +371,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index 25de158..0580c33 100644
--- a/arch/sh/include/asm/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
@@ -398,6 +398,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -410,6 +411,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 83da5de..e9fa1bfe 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -404,7 +404,7 @@
  *  If an entry has a device ID, it must match
  *  If an entry has a connection ID, it must match
  * Then we take the most specific entry - with the following
- * order of precidence: dev+con > dev only > con only.
+ * order of precedence: dev+con > dev only > con only.
  */
 static struct clk *clk_find(const char *dev_id, const char *con_id)
 {
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index fc065f9..14726ee 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -326,7 +326,7 @@
 	NULL,
 };
 
-static struct sysfs_ops sq_sysfs_ops = {
+static const struct sysfs_ops sq_sysfs_ops = {
 	.show	= sq_sysfs_show,
 	.store	= sq_sysfs_store,
 };
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 71399cd..81f5837 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -53,110 +53,6 @@
 	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 }
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc(uint call, int first, int second,
-		       int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMTIMEDOP)
-		switch (call) {
-		case SEMOP:
-			return sys_semtimedop(first,
-					      (struct sembuf __user *)ptr,
-					      second, NULL);
-		case SEMTIMEDOP:
-			return sys_semtimedop(first,
-				(struct sembuf __user *)ptr, second,
-			        (const struct timespec __user *)fifth);
-		case SEMGET:
-			return sys_semget (first, second, third);
-		case SEMCTL: {
-			union semun fourth;
-			if (!ptr)
-				return -EINVAL;
-			if (get_user(fourth.__pad, (void __user * __user *) ptr))
-				return -EFAULT;
-			return sys_semctl (first, second, third, fourth);
-			}
-		default:
-			return -EINVAL;
-		}
-
-	if (call <= MSGCTL)
-		switch (call) {
-		case MSGSND:
-			return sys_msgsnd (first, (struct msgbuf __user *) ptr,
-					  second, third);
-		case MSGRCV:
-			switch (version) {
-			case 0:
-			{
-				struct ipc_kludge tmp;
-
-				if (!ptr)
-					return -EINVAL;
-
-				if (copy_from_user(&tmp,
-					(struct ipc_kludge __user *) ptr,
-						   sizeof (tmp)))
-					return -EFAULT;
-
-				return sys_msgrcv (first, tmp.msgp, second,
-						   tmp.msgtyp, third);
-			}
-			default:
-				return sys_msgrcv (first,
-						   (struct msgbuf __user *) ptr,
-						   second, fifth, third);
-			}
-		case MSGGET:
-			return sys_msgget ((key_t) first, second);
-		case MSGCTL:
-			return sys_msgctl (first, second,
-					   (struct msqid_ds __user *) ptr);
-		default:
-			return -EINVAL;
-		}
-	if (call <= SHMCTL)
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			default: {
-				ulong raddr;
-				ret = do_shmat (first, (char __user *) ptr,
-						 second, &raddr);
-				if (ret)
-					return ret;
-				return put_user (raddr, (ulong __user *) third);
-			}
-			case 1:	/* iBCS2 emulator entry point */
-				if (!segment_eq(get_fs(), get_ds()))
-					return -EINVAL;
-				return do_shmat (first, (char __user *) ptr,
-						  second, (ulong *) third);
-			}
-		case SHMDT:
-			return sys_shmdt ((char __user *)ptr);
-		case SHMGET:
-			return sys_shmget (first, second, third);
-		case SHMCTL:
-			return sys_shmctl (first, second,
-					   (struct shmid_ds __user *) ptr);
-		default:
-			return -EINVAL;
-		}
-
-	return -EINVAL;
-}
-
 /* sys_cacheflush -- flush (part of) the processor cache.  */
 asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
 {
@@ -197,14 +93,3 @@
 	up_read(&current->mm->mmap_sem);
 	return 0;
 }
-
-asmlinkage int sys_uname(struct old_utsname __user *name)
-{
-	int err;
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof(*name));
-	up_read(&uts_sem);
-	return err?-EFAULT:0;
-}
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 4097f6a..6db5136 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -127,6 +127,9 @@
 	bool
 	default y if SPARC32
 
+config NEED_DMA_MAP_STATE
+	def_bool y
+
 config GENERIC_ISA_DMA
 	bool
 	default y if SPARC32
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
index 0e70625..5016f76 100644
--- a/arch/sparc/include/asm/compat.h
+++ b/arch/sparc/include/asm/compat.h
@@ -5,7 +5,8 @@
  */
 #include <linux/types.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"sparc\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 5a8c308..4b4a0c0 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -8,7 +8,6 @@
 #define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
 
 extern int dma_supported(struct device *dev, u64 mask);
-extern int dma_set_mask(struct device *dev, u64 dma_mask);
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
@@ -62,4 +61,17 @@
 	return (1 << INTERNODE_CACHE_SHIFT);
 }
 
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		if (!dev->dma_mask || !dma_supported(dev, mask))
+			return -EINVAL;
+		*dev->dma_mask = mask;
+		return 0;
+	}
+#endif
+	return -EINVAL;
+}
+
 #endif
diff --git a/arch/sparc/include/asm/fbio.h b/arch/sparc/include/asm/fbio.h
index b9215a0..0a21da8 100644
--- a/arch/sparc/include/asm/fbio.h
+++ b/arch/sparc/include/asm/fbio.h
@@ -173,7 +173,7 @@
 	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
         int     mdi_type;       /* FBTYPE name */
         int     mdi_height;     /* height */
-        int     mdi_width;      /* widht */
+        int     mdi_width;      /* width */
         int     mdi_size;       /* available ram */
         int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
         int     mdi_pixfreq;    /* pixel clock (from PROM) */
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
index e769f66..332ac9a 100644
--- a/arch/sparc/include/asm/pci_32.h
+++ b/arch/sparc/include/asm/pci_32.h
@@ -32,20 +32,6 @@
 
 struct pci_dev;
 
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
index b0576df..5312782 100644
--- a/arch/sparc/include/asm/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -32,20 +32,6 @@
  */
 #define PCI_DMA_BUS_IS_PHYS	(0)
 
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
 /* PCI IOMMU mapping bypass support. */
 
 /* PCI 64-bit addressing works for all slots on all controller
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index cb4b9bf..d0b3b01 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -432,7 +432,9 @@
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
-#ifndef __32bit_syscall_numbers__
+#ifdef __32bit_syscall_numbers__
+#define __ARCH_WANT_SYS_IPC
+#else
 #define __ARCH_WANT_COMPAT_SYS_TIME
 #define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
 #endif
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index 5fad949..8414549 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -862,13 +862,3 @@
 	return 0;
 }
 EXPORT_SYMBOL(dma_supported);
-
-int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
-#endif
-	return -EINVAL;
-}
-EXPORT_SYMBOL(dma_set_mask);
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 3c8c44f..84e5386 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -676,17 +676,6 @@
 }
 EXPORT_SYMBOL(dma_supported);
 
-int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
-#endif
-	return -EOPNOTSUPP;
-}
-EXPORT_SYMBOL(dma_set_mask);
-
-
 #ifdef CONFIG_PROC_FS
 
 static int sparc_io_proc_show(struct seq_file *m, void *v)
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 9f2b2ba..68cb9b4 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -1189,7 +1189,7 @@
 
 	regs = args->regs;
 
-	data.addr = 0;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
@@ -1353,7 +1353,7 @@
 }
 
 /* Like powerpc we can't get PMU interrupts within the PMU handler,
- * so no need for seperate NMI and IRQ chains as on x86.
+ * so no need for separate NMI and IRQ chains as on x86.
  */
 static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
 
diff --git a/arch/sparc/kernel/sys_sparc_32.c b/arch/sparc/kernel/sys_sparc_32.c
index 3a82e65..ee995b7 100644
--- a/arch/sparc/kernel/sys_sparc_32.c
+++ b/arch/sparc/kernel/sys_sparc_32.c
@@ -98,119 +98,6 @@
 	return error;
 }
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-
-asmlinkage int sys_ipc (uint call, int first, int second, int third, void __user *ptr, long fifth)
-{
-	int version, err;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMCTL)
-		switch (call) {
-		case SEMOP:
-			err = sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
-			goto out;
-		case SEMTIMEDOP:
-			err = sys_semtimedop (first, (struct sembuf __user *)ptr, second, (const struct timespec __user *) fifth);
-			goto out;
-		case SEMGET:
-			err = sys_semget (first, second, third);
-			goto out;
-		case SEMCTL: {
-			union semun fourth;
-			err = -EINVAL;
-			if (!ptr)
-				goto out;
-			err = -EFAULT;
-			if (get_user(fourth.__pad,
-				     (void __user * __user *)ptr))
-				goto out;
-			err = sys_semctl (first, second, third, fourth);
-			goto out;
-			}
-		default:
-			err = -ENOSYS;
-			goto out;
-		}
-	if (call <= MSGCTL) 
-		switch (call) {
-		case MSGSND:
-			err = sys_msgsnd (first, (struct msgbuf __user *) ptr, 
-					  second, third);
-			goto out;
-		case MSGRCV:
-			switch (version) {
-			case 0: {
-				struct ipc_kludge tmp;
-				err = -EINVAL;
-				if (!ptr)
-					goto out;
-				err = -EFAULT;
-				if (copy_from_user(&tmp, (struct ipc_kludge __user *) ptr, sizeof (tmp)))
-					goto out;
-				err = sys_msgrcv (first, tmp.msgp, second, tmp.msgtyp, third);
-				goto out;
-				}
-			case 1: default:
-				err = sys_msgrcv (first,
-						  (struct msgbuf __user *) ptr,
-						  second, fifth, third);
-				goto out;
-			}
-		case MSGGET:
-			err = sys_msgget ((key_t) first, second);
-			goto out;
-		case MSGCTL:
-			err = sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
-			goto out;
-		default:
-			err = -ENOSYS;
-			goto out;
-		}
-	if (call <= SHMCTL) 
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			case 0: default: {
-				ulong raddr;
-				err = do_shmat (first, (char __user *) ptr, second, &raddr);
-				if (err)
-					goto out;
-				err = -EFAULT;
-				if (put_user (raddr, (ulong __user *) third))
-					goto out;
-				err = 0;
-				goto out;
-				}
-			case 1:	/* iBCS2 emulator entry point */
-				err = -EINVAL;
-				goto out;
-			}
-		case SHMDT: 
-			err = sys_shmdt ((char __user *)ptr);
-			goto out;
-		case SHMGET:
-			err = sys_shmget (first, second, third);
-			goto out;
-		case SHMCTL:
-			err = sys_shmctl (first, second, (struct shmid_ds __user *) ptr);
-			goto out;
-		default:
-			err = -ENOSYS;
-			goto out;
-		}
-	else
-		err = -ENOSYS;
-out:
-	return err;
-}
-
 int sparc_mmap_check(unsigned long addr, unsigned long len)
 {
 	if (ARCH_SUN4C &&
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index cb1bef6..3d435c4 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -426,7 +426,7 @@
  * This is really horribly ugly.
  */
 
-SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, unsigned long, second,
+SYSCALL_DEFINE6(sparc_ipc, unsigned int, call, int, first, unsigned long, second,
 		unsigned long, third, void __user *, ptr, long, fifth)
 {
 	long err;
@@ -510,17 +510,6 @@
 	return err;
 }
 
-SYSCALL_DEFINE1(sparc64_newuname, struct new_utsname __user *, name)
-{
-	int ret = sys_newuname(name);
-	
-	if (current->personality == PER_LINUX32 && !ret) {
-		ret = (copy_to_user(name->machine, "sparc\0\0", 8)
-		       ? -EFAULT : 0);
-	}
-	return ret;
-}
-
 SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality)
 {
 	int ret;
diff --git a/arch/sparc/kernel/systbls.h b/arch/sparc/kernel/systbls.h
index 68312fe..118759c 100644
--- a/arch/sparc/kernel/systbls.h
+++ b/arch/sparc/kernel/systbls.h
@@ -6,15 +6,12 @@
 #include <asm/utrap.h>
 #include <asm/signal.h>
 
-struct new_utsname;
-
 extern asmlinkage unsigned long sys_getpagesize(void);
 extern asmlinkage long sparc_pipe(struct pt_regs *regs);
-extern asmlinkage long sys_ipc(unsigned int call, int first,
+extern asmlinkage long sys_sparc_ipc(unsigned int call, int first,
 			       unsigned long second,
 			       unsigned long third,
 			       void __user *ptr, long fifth);
-extern asmlinkage long sparc64_newuname(struct new_utsname __user *name);
 extern asmlinkage long sparc64_personality(unsigned long personality);
 extern asmlinkage long sys64_munmap(unsigned long addr, size_t len);
 extern asmlinkage unsigned long sys64_mremap(unsigned long addr,
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 1761425..9db058d 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -55,7 +55,7 @@
 /*170*/	.word sys32_lsetxattr, sys32_fsetxattr, sys_getxattr, sys_lgetxattr, compat_sys_getdents
 	.word sys_setsid, sys_fchdir, sys32_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys32_flistxattr, sys_removexattr, sys_lremovexattr, compat_sys_sigpending, sys_ni_syscall
-	.word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sys_sparc64_newuname
+	.word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sys_newuname
 /*190*/	.word sys32_init_module, sys_sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl
 	.word sys32_epoll_wait, sys32_ioprio_set, sys_getppid, sys32_sigaction, sys_sgetmask
 /*200*/	.word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir
@@ -130,13 +130,13 @@
 /*170*/	.word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents
 	.word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall
-	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_sparc64_newuname
+	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_newuname
 /*190*/	.word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
 	.word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask
 /*200*/	.word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall
 	.word sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64
 /*210*/	.word sys_fadvise64_64, sys_tgkill, sys_waitpid, sys_swapoff, sys_sysinfo
-	.word sys_ipc, sys_nis_syscall, sys_clone, sys_ioprio_get, sys_adjtimex
+	.word sys_sparc_ipc, sys_nis_syscall, sys_clone, sys_ioprio_get, sys_adjtimex
 /*220*/	.word sys_nis_syscall, sys_ni_syscall, sys_delete_module, sys_ni_syscall, sys_getpgid
 	.word sys_bdflush, sys_sysfs, sys_nis_syscall, sys_setfsuid, sys_setfsgid
 /*230*/	.word sys_select, sys_nis_syscall, sys_splice, sys_stime, sys_statfs64
diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
index 378de4b..b948c14 100644
--- a/arch/um/include/asm/dma-mapping.h
+++ b/arch/um/include/asm/dma-mapping.h
@@ -104,14 +104,6 @@
 }
 
 static inline void
-dma_sync_single_range(struct device *dev, dma_addr_t dma_handle,
-		      unsigned long offset, size_t size,
-		      enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	       enum dma_data_direction direction)
 {
diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
index 6c88990..2cd899f 100644
--- a/arch/um/include/asm/ptrace-generic.h
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -16,6 +16,8 @@
 	struct uml_pt_regs regs;
 };
 
+#define arch_has_single_step()	(1)
+
 #define EMPTY_REGS { .regs = EMPTY_UML_PT_REGS }
 
 #define PT_REGS_IP(r) UPT_IP(&(r)->regs)
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 8e3d69e..4845099 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -12,16 +12,25 @@
 #endif
 #include "skas_ptrace.h"
 
-static inline void set_singlestepping(struct task_struct *child, int on)
+
+
+void user_enable_single_step(struct task_struct *child)
 {
-	if (on)
-		child->ptrace |= PT_DTRACE;
-	else
-		child->ptrace &= ~PT_DTRACE;
+	child->ptrace |= PT_DTRACE;
 	child->thread.singlestep_syscall = 0;
 
 #ifdef SUBARCH_SET_SINGLESTEPPING
-	SUBARCH_SET_SINGLESTEPPING(child, on);
+	SUBARCH_SET_SINGLESTEPPING(child, 1);
+#endif
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	child->ptrace &= ~PT_DTRACE;
+	child->thread.singlestep_syscall = 0;
+
+#ifdef SUBARCH_SET_SINGLESTEPPING
+	SUBARCH_SET_SINGLESTEPPING(child, 0);
 #endif
 }
 
@@ -30,7 +39,7 @@
  */
 void ptrace_disable(struct task_struct *child)
 {
-	set_singlestepping(child,0);
+	user_disable_single_step(child);
 }
 
 extern int peek_user(struct task_struct * child, long addr, long data);
@@ -69,53 +78,6 @@
 		ret = -EIO;
 		break;
 
-	/* continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-	/* restart after signal. */
-	case PTRACE_CONT: {
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-
-		set_singlestepping(child, 0);
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
-	case PTRACE_KILL: {
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-
-		set_singlestepping(child, 0);
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		set_singlestepping(child, 1);
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 #ifdef PTRACE_GETREGS
 	case PTRACE_GETREGS: { /* Get all gp regs from the child. */
 		if (!access_ok(VERIFY_WRITE, p, MAX_REG_OFFSET)) {
diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c
index cccab85..4393173 100644
--- a/arch/um/kernel/syscall.c
+++ b/arch/um/kernel/syscall.c
@@ -51,51 +51,6 @@
 	return err;
 }
 
-long sys_uname(struct old_utsname __user * name)
-{
-	long err;
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
-	up_read(&uts_sem);
-	return err?-EFAULT:0;
-}
-
-long sys_olduname(struct oldold_utsname __user * name)
-{
-	long error;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
-		return -EFAULT;
-
-	down_read(&uts_sem);
-
-	error = __copy_to_user(&name->sysname, &utsname()->sysname,
-			       __OLD_UTS_LEN);
-	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->release, &utsname()->release,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->release + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->version, &utsname()->version,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->version + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->machine, &utsname()->machine,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->machine + __OLD_UTS_LEN);
-
-	up_read(&uts_sem);
-
-	error = error ? -EFAULT : 0;
-
-	return error;
-}
-
 int kernel_execve(const char *filename, char *const argv[], char *const envp[])
 {
 	mm_segment_t fs;
diff --git a/arch/um/sys-i386/shared/sysdep/syscalls.h b/arch/um/sys-i386/shared/sysdep/syscalls.h
index e778767..05cb796 100644
--- a/arch/um/sys-i386/shared/sysdep/syscalls.h
+++ b/arch/um/sys-i386/shared/sysdep/syscalls.h
@@ -13,8 +13,6 @@
  */
 extern syscall_handler_t sys_rt_sigaction;
 
-extern syscall_handler_t old_mmap_i386;
-
 extern syscall_handler_t *sys_call_table[];
 
 #define EXECUTE_SYSCALL(syscall, regs) \
diff --git a/arch/um/sys-i386/sys_call_table.S b/arch/um/sys-i386/sys_call_table.S
index c6260dd..de274071 100644
--- a/arch/um/sys-i386/sys_call_table.S
+++ b/arch/um/sys-i386/sys_call_table.S
@@ -7,7 +7,7 @@
 #define sys_vm86old sys_ni_syscall
 #define sys_vm86 sys_ni_syscall
 
-#define old_mmap old_mmap_i386
+#define old_mmap sys_old_mmap
 
 #define ptregs_fork sys_fork
 #define ptregs_execve sys_execve
diff --git a/arch/um/sys-i386/syscalls.c b/arch/um/sys-i386/syscalls.c
index 857ca0b..70ca357 100644
--- a/arch/um/sys-i386/syscalls.c
+++ b/arch/um/sys-i386/syscalls.c
@@ -12,57 +12,6 @@
 #include "asm/unistd.h"
 
 /*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/i386 didn't use to be able to handle more than
- * 4 system call parameters, so these system calls used a memory
- * block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-extern int old_mmap(unsigned long addr, unsigned long len,
-		    unsigned long prot, unsigned long flags,
-		    unsigned long fd, unsigned long offset);
-
-long old_mmap_i386(struct mmap_arg_struct __user *arg)
-{
-	struct mmap_arg_struct a;
-	int err = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	err = old_mmap(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
- out:
-	return err;
-}
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set __user *inp;
-	fd_set __user *outp;
-	fd_set __user *exp;
-	struct timeval __user *tvp;
-};
-
-long old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
  * The prototype on i386 is:
  *
  *     int clone(int flags, void * child_stack, int * parent_tidptr, struct user_desc * newtls, int * child_tidptr)
@@ -85,92 +34,6 @@
 	return ret;
 }
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-long sys_ipc (uint call, int first, int second,
-	     int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *) ptr,
-				      second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *) ptr,
-				      second,
-				      (const struct timespec __user *) fifth);
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf *) ptr,
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge *) ptr,
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-		        panic("msgrcv with version != 0");
-			return sys_msgrcv (first,
-					   (struct msgbuf *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl (first, second, (struct msqid_ds *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat (first, (char *) ptr, second, &raddr);
-			if (ret)
-				return ret;
-			return put_user (raddr, (ulong *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			return do_shmat (first, (char *) ptr, second, (ulong *) third);
-		}
-	case SHMDT:
-		return sys_shmdt ((char *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-
 long sys_sigaction(int sig, const struct old_sigaction __user *act,
 			 struct old_sigaction __user *oact)
 {
diff --git a/arch/um/sys-x86_64/syscall_table.c b/arch/um/sys-x86_64/syscall_table.c
index dd21d69..47d469e 100644
--- a/arch/um/sys-x86_64/syscall_table.c
+++ b/arch/um/sys-x86_64/syscall_table.c
@@ -26,11 +26,6 @@
 
 /* On UML we call it this way ("old" means it's not mmap2) */
 #define sys_mmap old_mmap
-/*
- * On x86-64 sys_uname is actually sys_newuname plus a compatibility trick.
- * See arch/x86_64/kernel/sys_x86_64.c
- */
-#define sys_uname sys_uname64
 
 #define stub_clone sys_clone
 #define stub_fork sys_fork
diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c
index f1199fd..f3d82bb 100644
--- a/arch/um/sys-x86_64/syscalls.c
+++ b/arch/um/sys-x86_64/syscalls.c
@@ -12,20 +12,6 @@
 #include "asm/uaccess.h"
 #include "os.h"
 
-asmlinkage long sys_uname64(struct new_utsname __user * name)
-{
-	int err;
-
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
-	up_read(&uts_sem);
-
-	if (personality(current->personality) == PER_LINUX32)
-		err |= copy_to_user(&name->machine, "i686", 5);
-
-	return err ? -EFAULT : 0;
-}
-
 long arch_prctl(struct task_struct *task, int code, unsigned long __user *addr)
 {
 	unsigned long *ptr = addr, tmp;
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e984403..0eacb1f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -102,6 +102,9 @@
 config SBUS
 	bool
 
+config NEED_DMA_MAP_STATE
+       def_bool (X86_64 || DMAR || DMA_API_DEBUG)
+
 config GENERIC_ISA_DMA
 	def_bool y
 
@@ -659,7 +662,7 @@
 	bool "GART IOMMU support" if EMBEDDED
 	default y
 	select SWIOTLB
-	depends on X86_64 && PCI
+	depends on X86_64 && PCI && K8_NB
 	---help---
 	  Support for full DMA access of devices with 32bit memory access only
 	  on systems with more than 3GB. This is usually needed for USB,
@@ -2058,7 +2061,7 @@
 
 config K8_NB
 	def_bool y
-	depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
+	depends on CPU_SUP_AMD && PCI
 
 source "drivers/pcmcia/Kconfig"
 
diff --git a/arch/x86/crypto/twofish-i586-asm_32.S b/arch/x86/crypto/twofish-i586-asm_32.S
index 39b98ed..575331c 100644
--- a/arch/x86/crypto/twofish-i586-asm_32.S
+++ b/arch/x86/crypto/twofish-i586-asm_32.S
@@ -22,7 +22,7 @@
 
 #include <asm/asm-offsets.h>
 
-/* return adress at 0 */
+/* return address at 0 */
 
 #define in_blk    12  /* input byte array address parameter*/
 #define out_blk   8  /* output byte array address parameter*/
@@ -230,8 +230,8 @@
 	push    %edi
 
 	mov	tfm + 16(%esp),	%ebp	/* abuse the base pointer: set new base bointer to the crypto tfm */
-	add	$crypto_tfm_ctx_offset, %ebp	/* ctx adress */
-	mov     in_blk+16(%esp),%edi	/* input adress in edi */
+	add	$crypto_tfm_ctx_offset, %ebp	/* ctx address */
+	mov     in_blk+16(%esp),%edi	/* input address in edi */
 
 	mov	(%edi),		%eax
 	mov	b_offset(%edi),	%ebx
@@ -286,8 +286,8 @@
 
 
 	mov	tfm + 16(%esp),	%ebp	/* abuse the base pointer: set new base bointer to the crypto tfm */
-	add	$crypto_tfm_ctx_offset, %ebp	/* ctx adress */
-	mov     in_blk+16(%esp),%edi	/* input adress in edi */
+	add	$crypto_tfm_ctx_offset, %ebp	/* ctx address */
+	mov     in_blk+16(%esp),%edi	/* input address in edi */
 
 	mov	(%edi),		%eax
 	mov	b_offset(%edi),	%ebx
diff --git a/arch/x86/crypto/twofish-x86_64-asm_64.S b/arch/x86/crypto/twofish-x86_64-asm_64.S
index 35974a5..573aa10 100644
--- a/arch/x86/crypto/twofish-x86_64-asm_64.S
+++ b/arch/x86/crypto/twofish-x86_64-asm_64.S
@@ -221,11 +221,11 @@
 twofish_enc_blk:
 	pushq    R1
 
-	/* %rdi contains the crypto tfm adress */
-	/* %rsi contains the output adress */
-	/* %rdx contains the input adress */
-	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx adress */
-	/* ctx adress is moved to free one non-rex register
+	/* %rdi contains the crypto tfm address */
+	/* %rsi contains the output address */
+	/* %rdx contains the input address */
+	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx address */
+	/* ctx address is moved to free one non-rex register
 	as target for the 8bit high operations */
 	mov	%rdi,		%r11
 
@@ -274,11 +274,11 @@
 twofish_dec_blk:
 	pushq    R1
 
-	/* %rdi contains the crypto tfm adress */
-	/* %rsi contains the output adress */
-	/* %rdx contains the input adress */
-	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx adress */
-	/* ctx adress is moved to free one non-rex register
+	/* %rdi contains the crypto tfm address */
+	/* %rsi contains the output address */
+	/* %rdx contains the input address */
+	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx address */
+	/* ctx address is moved to free one non-rex register
 	as target for the 8bit high operations */
 	mov	%rdi,		%r11
 
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 53147ad..59b4556 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -563,7 +563,7 @@
 	.quad quiet_ni_syscall			/* old mpx syscall holder */
 	.quad sys_setpgid
 	.quad quiet_ni_syscall			/* old ulimit syscall holder */
-	.quad sys32_olduname
+	.quad sys_olduname
 	.quad sys_umask		/* 60 */
 	.quad sys_chroot
 	.quad compat_sys_ustat
@@ -586,7 +586,7 @@
 	.quad compat_sys_settimeofday
 	.quad sys_getgroups16	/* 80 */
 	.quad sys_setgroups16
-	.quad sys32_old_select
+	.quad compat_sys_old_select
 	.quad sys_symlink
 	.quad sys_lstat
 	.quad sys_readlink		/* 85 */
@@ -613,7 +613,7 @@
 	.quad compat_sys_newstat
 	.quad compat_sys_newlstat
 	.quad compat_sys_newfstat
-	.quad sys32_uname
+	.quad sys_uname
 	.quad stub32_iopl		/* 110 */
 	.quad sys_vhangup
 	.quad quiet_ni_syscall	/* old "idle" system call */
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 422572c..74c3543 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -143,7 +143,7 @@
  * block for parameter passing..
  */
 
-struct mmap_arg_struct {
+struct mmap_arg_struct32 {
 	unsigned int addr;
 	unsigned int len;
 	unsigned int prot;
@@ -152,9 +152,9 @@
 	unsigned int offset;
 };
 
-asmlinkage long sys32_mmap(struct mmap_arg_struct __user *arg)
+asmlinkage long sys32_mmap(struct mmap_arg_struct32 __user *arg)
 {
-	struct mmap_arg_struct a;
+	struct mmap_arg_struct32 a;
 
 	if (copy_from_user(&a, arg, sizeof(a)))
 		return -EFAULT;
@@ -332,24 +332,6 @@
 	return alarm_setitimer(seconds);
 }
 
-struct sel_arg_struct {
-	unsigned int n;
-	unsigned int inp;
-	unsigned int outp;
-	unsigned int exp;
-	unsigned int tvp;
-};
-
-asmlinkage long sys32_old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	return compat_sys_select(a.n, compat_ptr(a.inp), compat_ptr(a.outp),
-				 compat_ptr(a.exp), compat_ptr(a.tvp));
-}
-
 asmlinkage long sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr,
 			      int options)
 {
@@ -466,58 +448,6 @@
 	return ret;
 }
 
-asmlinkage long sys32_olduname(struct oldold_utsname __user *name)
-{
-	char *arch = "x86_64";
-	int err;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
-		return -EFAULT;
-
-	down_read(&uts_sem);
-
-	err = __copy_to_user(&name->sysname, &utsname()->sysname,
-			     __OLD_UTS_LEN);
-	err |= __put_user(0, name->sysname+__OLD_UTS_LEN);
-	err |= __copy_to_user(&name->nodename, &utsname()->nodename,
-			      __OLD_UTS_LEN);
-	err |= __put_user(0, name->nodename+__OLD_UTS_LEN);
-	err |= __copy_to_user(&name->release, &utsname()->release,
-			      __OLD_UTS_LEN);
-	err |= __put_user(0, name->release+__OLD_UTS_LEN);
-	err |= __copy_to_user(&name->version, &utsname()->version,
-			      __OLD_UTS_LEN);
-	err |= __put_user(0, name->version+__OLD_UTS_LEN);
-
-	if (personality(current->personality) == PER_LINUX32)
-		arch = "i686";
-
-	err |= __copy_to_user(&name->machine, arch, strlen(arch) + 1);
-
-	up_read(&uts_sem);
-
-	err = err ? -EFAULT : 0;
-
-	return err;
-}
-
-long sys32_uname(struct old_utsname __user *name)
-{
-	int err;
-
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof(*name));
-	up_read(&uts_sem);
-	if (personality(current->personality) == PER_LINUX32)
-		err |= copy_to_user(&name->machine, "i686", 5);
-
-	return err ? -EFAULT : 0;
-}
-
 asmlinkage long sys32_execve(char __user *name, compat_uptr_t __user *argv,
 			     compat_uptr_t __user *envp, struct pt_regs *regs)
 {
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index 9a9c7bd..306160e 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -8,7 +8,8 @@
 #include <linux/sched.h>
 #include <asm/user32.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"i686\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/x86/include/asm/hw_breakpoint.h b/arch/x86/include/asm/hw_breakpoint.h
index 0675a7c..2a1bd8f 100644
--- a/arch/x86/include/asm/hw_breakpoint.h
+++ b/arch/x86/include/asm/hw_breakpoint.h
@@ -10,7 +10,6 @@
  * (display/resolving)
  */
 struct arch_hw_breakpoint {
-	char		*name; /* Contains name of the symbol to set bkpt */
 	unsigned long	address;
 	u8		len;
 	u8		type;
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 3e002ca..404a880 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -97,34 +97,6 @@
 
 #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
 
-#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG)
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       \
-	        dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)         \
-	        __u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)                  \
-	        ((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)         \
-	        (((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)                    \
-	        ((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)           \
-	        (((PTR)->LEN_NAME) = (VAL))
-
-#else
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       dma_addr_t ADDR_NAME[0];
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) unsigned LEN_NAME[0];
-#define pci_unmap_addr(PTR, ADDR_NAME)  sizeof((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
-	        do { break; } while (pci_unmap_addr(PTR, ADDR_NAME))
-#define pci_unmap_len(PTR, LEN_NAME)            sizeof((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
-	        do { break; } while (pci_unmap_len(PTR, LEN_NAME))
-
-#endif
-
 #endif  /* __KERNEL__ */
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index befd172..db6109a 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -18,7 +18,7 @@
 #define MSR_ARCH_PERFMON_EVENTSEL0			     0x186
 #define MSR_ARCH_PERFMON_EVENTSEL1			     0x187
 
-#define ARCH_PERFMON_EVENTSEL0_ENABLE			  (1 << 22)
+#define ARCH_PERFMON_EVENTSEL_ENABLE			  (1 << 22)
 #define ARCH_PERFMON_EVENTSEL_ANY			  (1 << 21)
 #define ARCH_PERFMON_EVENTSEL_INT			  (1 << 20)
 #define ARCH_PERFMON_EVENTSEL_OS			  (1 << 17)
@@ -50,7 +50,7 @@
 	 INTEL_ARCH_INV_MASK| \
 	 INTEL_ARCH_EDGE_MASK|\
 	 INTEL_ARCH_UNIT_MASK|\
-	 INTEL_ARCH_EVTSEL_MASK)
+	 INTEL_ARCH_EVENT_MASK)
 
 #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL		      0x3c
 #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK		(0x00 << 8)
@@ -117,6 +117,18 @@
  */
 #define X86_PMC_IDX_FIXED_BTS				(X86_PMC_IDX_FIXED + 16)
 
+/* IbsFetchCtl bits/masks */
+#define IBS_FETCH_RAND_EN		(1ULL<<57)
+#define IBS_FETCH_VAL			(1ULL<<49)
+#define IBS_FETCH_ENABLE		(1ULL<<48)
+#define IBS_FETCH_CNT			0xFFFF0000ULL
+#define IBS_FETCH_MAX_CNT		0x0000FFFFULL
+
+/* IbsOpCtl bits */
+#define IBS_OP_CNT_CTL			(1ULL<<19)
+#define IBS_OP_VAL			(1ULL<<18)
+#define IBS_OP_ENABLE			(1ULL<<17)
+#define IBS_OP_MAX_CNT			0x0000FFFFULL
 
 #ifdef CONFIG_PERF_EVENTS
 extern void init_hw_perf_events(void);
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index 2010280..69a686a 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -274,14 +274,7 @@
 		return 0;
 }
 
-/*
- * These are defined as per linux/ptrace.h, which see.
- */
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
-
-extern void user_enable_block_step(struct task_struct *);
 #ifdef CONFIG_X86_DEBUGCTLMSR
 #define arch_has_block_step()	(1)
 #else
diff --git a/arch/x86/include/asm/sys_ia32.h b/arch/x86/include/asm/sys_ia32.h
index d5f6904..3ad4217 100644
--- a/arch/x86/include/asm/sys_ia32.h
+++ b/arch/x86/include/asm/sys_ia32.h
@@ -26,8 +26,8 @@
 asmlinkage long sys32_fstat64(unsigned int, struct stat64 __user *);
 asmlinkage long sys32_fstatat(unsigned int, char __user *,
 			      struct stat64 __user *, int);
-struct mmap_arg_struct;
-asmlinkage long sys32_mmap(struct mmap_arg_struct __user *);
+struct mmap_arg_struct32;
+asmlinkage long sys32_mmap(struct mmap_arg_struct32 __user *);
 asmlinkage long sys32_mprotect(unsigned long, size_t, unsigned long);
 
 struct sigaction32;
@@ -40,8 +40,6 @@
 				     compat_sigset_t __user *, unsigned int);
 asmlinkage long sys32_alarm(unsigned int);
 
-struct sel_arg_struct;
-asmlinkage long sys32_old_select(struct sel_arg_struct __user *);
 asmlinkage long sys32_waitpid(compat_pid_t, unsigned int *, int);
 asmlinkage long sys32_sysfs(int, u32, u32);
 
@@ -56,11 +54,6 @@
 asmlinkage long sys32_personality(unsigned long);
 asmlinkage long sys32_sendfile(int, int, compat_off_t __user *, s32);
 
-struct oldold_utsname;
-struct old_utsname;
-asmlinkage long sys32_olduname(struct oldold_utsname __user *);
-long sys32_uname(struct old_utsname __user *);
-
 asmlinkage long sys32_execve(char __user *, compat_uptr_t __user *,
 			     compat_uptr_t __user *, struct pt_regs *);
 asmlinkage long sys32_clone(unsigned int, unsigned int, struct pt_regs *);
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 8868b94..5c044b4 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -50,18 +50,6 @@
 			     struct old_sigaction __user *);
 unsigned long sys_sigreturn(struct pt_regs *);
 
-/* kernel/sys_i386_32.c */
-struct mmap_arg_struct;
-struct sel_arg_struct;
-struct oldold_utsname;
-struct old_utsname;
-
-asmlinkage int old_mmap(struct mmap_arg_struct __user *);
-asmlinkage int old_select(struct sel_arg_struct __user *);
-asmlinkage int sys_ipc(uint, int, int, int, void __user *, long);
-asmlinkage int sys_uname(struct old_utsname __user *);
-asmlinkage int sys_olduname(struct oldold_utsname __user *);
-
 /* kernel/vm86_32.c */
 int sys_vm86old(struct vm86_struct __user *, struct pt_regs *);
 int sys_vm86(unsigned long, unsigned long, struct pt_regs *);
@@ -73,11 +61,8 @@
 long sys_arch_prctl(int, unsigned long);
 
 /* kernel/sys_x86_64.c */
-struct new_utsname;
-
 asmlinkage long sys_mmap(unsigned long, unsigned long, unsigned long,
 			 unsigned long, unsigned long, unsigned long);
-asmlinkage long sys_uname(struct new_utsname __user *);
 
 #endif /* CONFIG_X86_32 */
 #endif /* _ASM_X86_SYSCALLS_H */
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index 3baf379..beb9b5f 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -354,6 +354,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -366,6 +367,9 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
+#define __ARCH_WANT_SYS_OLD_MMAP
+#define __ARCH_WANT_SYS_OLD_SELECT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index 4843f7b..ff4307b 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -146,7 +146,7 @@
 #define __NR_kill				62
 __SYSCALL(__NR_kill, sys_kill)
 #define __NR_uname				63
-__SYSCALL(__NR_uname, sys_uname)
+__SYSCALL(__NR_uname, sys_newuname)
 
 #define __NR_semget				64
 __SYSCALL(__NR_semget, sys_semget)
@@ -680,6 +680,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index a54d714..0061ea2 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -490,6 +490,7 @@
  *  ACPI based hotplug support for CPU
  */
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
+#include <acpi/processor.h>
 
 static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
@@ -567,6 +568,8 @@
 		goto free_new_map;
 	}
 
+	acpi_processor_set_pdc(handle);
+
 	cpu = cpumask_first(new_map);
 	acpi_map_cpu2node(handle, cpu, physid);
 
@@ -1293,23 +1296,6 @@
 }
 
 /*
- * Limit ACPI to CPU enumeration for HT
- */
-static int __init force_acpi_ht(const struct dmi_system_id *d)
-{
-	if (!acpi_force) {
-		printk(KERN_NOTICE "%s detected: force use of acpi=ht\n",
-		       d->ident);
-		disable_acpi();
-		acpi_ht = 1;
-	} else {
-		printk(KERN_NOTICE
-		       "Warning: acpi=force overrules DMI blacklist: acpi=ht\n");
-	}
-	return 0;
-}
-
-/*
  * Force ignoring BIOS IRQ0 pin2 override
  */
 static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
@@ -1345,82 +1331,6 @@
 	 },
 
 	/*
-	 * Boxes that need acpi=ht
-	 */
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "FSC Primergy T850",
-	 .matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "HP VISUALIZE NT Workstation",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "Compaq Workstation W8000",
-	 .matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "ASUS CUR-DLS",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		     DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "ABIT i440BX-W83977",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
-		     DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "IBM Bladecenter",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "IBM eServer xSeries 360",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "IBM eserver xSeries 330",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "IBM eserver xSeries 440",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
-		     },
-	 },
-
-	/*
 	 * Boxes that need ACPI PCI IRQ routing disabled
 	 */
 	{
@@ -1652,8 +1562,10 @@
 	}
 	/* Limit ACPI just to boot-time to enable HT */
 	else if (strcmp(arg, "ht") == 0) {
-		if (!acpi_force)
+		if (!acpi_force) {
+			printk(KERN_WARNING "acpi=ht will be removed in Linux-2.6.35\n");
 			disable_acpi();
+		}
 		acpi_ht = 1;
 	}
 	/* acpi=rsdt use RSDT instead of XSDT */
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index f147a95..3704997 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -31,7 +31,6 @@
 #include <asm/x86_init.h>
 
 int gart_iommu_aperture;
-EXPORT_SYMBOL_GPL(gart_iommu_aperture);
 int gart_iommu_aperture_disabled __initdata;
 int gart_iommu_aperture_allowed __initdata;
 
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index e3c3d82..09d3b17 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -223,7 +223,7 @@
 };
 
 /*
- * Physflat mode is used when there are more than 8 CPUs on a AMD system.
+ * Physflat mode is used when there are more than 8 CPUs on a system.
  * We cannot use logical delivery in this case because the mask
  * overflows, so use physical mode.
  */
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 3740c8a..49dbeae 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -120,11 +120,9 @@
 unsigned long sn_rtc_cycles_per_second;
 EXPORT_SYMBOL(sn_rtc_cycles_per_second);
 
-/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
-
 static const struct cpumask *uv_target_cpus(void)
 {
-	return cpumask_of(0);
+	return cpu_online_mask;
 }
 
 static void uv_vector_allocation_domain(int cpu, struct cpumask *retmask)
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 879666f..7e1cca1 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -70,7 +70,8 @@
 	if (c->x86_power & (1 << 8)) {
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 		set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
-		sched_clock_stable = 1;
+		if (!check_tsc_unstable())
+			sched_clock_stable = 1;
 	}
 
 	/*
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index eddb1bd..b3eeb66 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -903,7 +903,7 @@
 	return ret;
 }
 
-static struct sysfs_ops sysfs_ops = {
+static const struct sysfs_ops sysfs_ops = {
 	.show   = show,
 	.store  = store,
 };
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index a8aacd4..3ab9c88 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -46,6 +46,13 @@
 
 #include "mce-internal.h"
 
+static DEFINE_MUTEX(mce_read_mutex);
+
+#define rcu_dereference_check_mce(p) \
+	rcu_dereference_check((p), \
+			      rcu_read_lock_sched_held() || \
+			      lockdep_is_held(&mce_read_mutex))
+
 #define CREATE_TRACE_POINTS
 #include <trace/events/mce.h>
 
@@ -158,7 +165,7 @@
 	mce->finished = 0;
 	wmb();
 	for (;;) {
-		entry = rcu_dereference(mcelog.next);
+		entry = rcu_dereference_check_mce(mcelog.next);
 		for (;;) {
 			/*
 			 * When the buffer fills up discard new entries.
@@ -1485,8 +1492,6 @@
 	rdtscll(cpu_tsc[smp_processor_id()]);
 }
 
-static DEFINE_MUTEX(mce_read_mutex);
-
 static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 			loff_t *off)
 {
@@ -1500,7 +1505,7 @@
 		return -ENOMEM;
 
 	mutex_lock(&mce_read_mutex);
-	next = rcu_dereference(mcelog.next);
+	next = rcu_dereference_check_mce(mcelog.next);
 
 	/* Only supports full reads right now */
 	if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) {
@@ -1565,7 +1570,7 @@
 static unsigned int mce_poll(struct file *file, poll_table *wait)
 {
 	poll_wait(file, &mce_wait, wait);
-	if (rcu_dereference(mcelog.next))
+	if (rcu_dereference_check_mce(mcelog.next))
 		return POLLIN | POLLRDNORM;
 	return 0;
 }
@@ -2044,6 +2049,7 @@
 		struct mce_bank *b = &mce_banks[i];
 		struct sysdev_attribute *a = &b->attr;
 
+		sysfs_attr_init(&a->attr);
 		a->attr.name	= b->attrname;
 		snprintf(b->attrname, ATTR_LEN, "bank%d", i);
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 83a3d1f..cda932c 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -388,7 +388,7 @@
 	return ret;
 }
 
-static struct sysfs_ops threshold_ops = {
+static const struct sysfs_ops threshold_ops = {
 	.show			= show,
 	.store			= store,
 };
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index 7c78563..d15df6e 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -95,7 +95,7 @@
 
 		/* Already owned by someone else? */
 		if (val & CMCI_EN) {
-			if (test_and_clear_bit(i, owned) || boot)
+			if (test_and_clear_bit(i, owned) && !boot)
 				print_update("SHD", &hdr, i);
 			__clear_bit(i, __get_cpu_var(mce_poll_banks));
 			continue;
@@ -107,7 +107,7 @@
 
 		/* Did the enable bit stick? -- the bank supports CMCI */
 		if (val & CMCI_EN) {
-			if (!test_and_set_bit(i, owned) || boot)
+			if (!test_and_set_bit(i, owned) && !boot)
 				print_update("CMCI", &hdr, i);
 			__clear_bit(i, __get_cpu_var(mce_poll_banks));
 		} else {
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index b1fbdee..42aafd1 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -73,10 +73,10 @@
 struct event_constraint {
 	union {
 		unsigned long	idxmsk[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
-		u64		idxmsk64[1];
+		u64		idxmsk64;
 	};
-	int	code;
-	int	cmask;
+	u64	code;
+	u64	cmask;
 	int	weight;
 };
 
@@ -103,7 +103,7 @@
 };
 
 #define __EVENT_CONSTRAINT(c, n, m, w) {\
-	{ .idxmsk64[0] = (n) },		\
+	{ .idxmsk64 = (n) },		\
 	.code = (c),			\
 	.cmask = (m),			\
 	.weight = (w),			\
@@ -116,7 +116,7 @@
 	EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVTSEL_MASK)
 
 #define FIXED_EVENT_CONSTRAINT(c, n)	\
-	EVENT_CONSTRAINT(c, n, INTEL_ARCH_FIXED_MASK)
+	EVENT_CONSTRAINT(c, (1ULL << (32+n)), INTEL_ARCH_FIXED_MASK)
 
 #define EVENT_CONSTRAINT_END		\
 	EVENT_CONSTRAINT(0, 0, 0)
@@ -503,6 +503,9 @@
 	 */
 	if (attr->type == PERF_TYPE_RAW) {
 		hwc->config |= x86_pmu.raw_event(attr->config);
+		if ((hwc->config & ARCH_PERFMON_EVENTSEL_ANY) &&
+		    perf_paranoid_cpu() && !capable(CAP_SYS_ADMIN))
+			return -EACCES;
 		return 0;
 	}
 
@@ -553,9 +556,9 @@
 		if (!test_bit(idx, cpuc->active_mask))
 			continue;
 		rdmsrl(x86_pmu.eventsel + idx, val);
-		if (!(val & ARCH_PERFMON_EVENTSEL0_ENABLE))
+		if (!(val & ARCH_PERFMON_EVENTSEL_ENABLE))
 			continue;
-		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(x86_pmu.eventsel + idx, val);
 	}
 }
@@ -590,7 +593,7 @@
 			continue;
 
 		val = event->hw.config;
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(x86_pmu.eventsel + idx, val);
 	}
 }
@@ -612,8 +615,8 @@
 	bitmap_zero(used_mask, X86_PMC_IDX_MAX);
 
 	for (i = 0; i < n; i++) {
-		constraints[i] =
-		  x86_pmu.get_event_constraints(cpuc, cpuc->event_list[i]);
+		c = x86_pmu.get_event_constraints(cpuc, cpuc->event_list[i]);
+		constraints[i] = c;
 	}
 
 	/*
@@ -853,7 +856,7 @@
 static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc, int idx)
 {
 	(void)checking_wrmsrl(hwc->config_base + idx,
-			      hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE);
+			      hwc->config | ARCH_PERFMON_EVENTSEL_ENABLE);
 }
 
 static inline void x86_pmu_disable_event(struct hw_perf_event *hwc, int idx)
@@ -1094,8 +1097,7 @@
 	int idx, handled = 0;
 	u64 val;
 
-	data.addr = 0;
-	data.raw = NULL;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
@@ -1347,6 +1349,7 @@
 
 void __init init_hw_perf_events(void)
 {
+	struct event_constraint *c;
 	int err;
 
 	pr_info("Performance Events: ");
@@ -1395,6 +1398,16 @@
 		__EVENT_CONSTRAINT(0, (1ULL << x86_pmu.num_events) - 1,
 				   0, x86_pmu.num_events);
 
+	if (x86_pmu.event_constraints) {
+		for_each_event_constraint(c, x86_pmu.event_constraints) {
+			if (c->cmask != INTEL_ARCH_FIXED_MASK)
+				continue;
+
+			c->idxmsk64 |= (1ULL << x86_pmu.num_events) - 1;
+			c->weight += x86_pmu.num_events;
+		}
+	}
+
 	pr_info("... version:                %d\n",     x86_pmu.version);
 	pr_info("... bit width:              %d\n",     x86_pmu.event_bits);
 	pr_info("... generic registers:      %d\n",     x86_pmu.num_events);
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 977e754..44b60c8 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -1,7 +1,7 @@
 #ifdef CONFIG_CPU_SUP_INTEL
 
 /*
- * Intel PerfMon v3. Used on Core2 and later.
+ * Intel PerfMon, used on Core and later.
  */
 static const u64 intel_perfmon_event_map[] =
 {
@@ -27,8 +27,14 @@
 
 static struct event_constraint intel_core2_event_constraints[] =
 {
-	FIXED_EVENT_CONSTRAINT(0xc0, (0x3|(1ULL<<32))), /* INSTRUCTIONS_RETIRED */
-	FIXED_EVENT_CONSTRAINT(0x3c, (0x3|(1ULL<<33))), /* UNHALTED_CORE_CYCLES */
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	/*
+	 * Core2 has Fixed Counter 2 listed as CPU_CLK_UNHALTED.REF and event
+	 * 0x013c as CPU_CLK_UNHALTED.BUS and specifies there is a fixed
+	 * ratio between these counters.
+	 */
+	/* FIXED_EVENT_CONSTRAINT(0x013c, 2),  CPU_CLK_UNHALTED.REF */
 	INTEL_EVENT_CONSTRAINT(0x10, 0x1), /* FP_COMP_OPS_EXE */
 	INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */
 	INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */
@@ -37,14 +43,16 @@
 	INTEL_EVENT_CONSTRAINT(0x18, 0x1), /* IDLE_DURING_DIV */
 	INTEL_EVENT_CONSTRAINT(0x19, 0x2), /* DELAYED_BYPASS */
 	INTEL_EVENT_CONSTRAINT(0xa1, 0x1), /* RS_UOPS_DISPATCH_CYCLES */
+	INTEL_EVENT_CONSTRAINT(0xc9, 0x1), /* ITLB_MISS_RETIRED (T30-9) */
 	INTEL_EVENT_CONSTRAINT(0xcb, 0x1), /* MEM_LOAD_RETIRED */
 	EVENT_CONSTRAINT_END
 };
 
 static struct event_constraint intel_nehalem_event_constraints[] =
 {
-	FIXED_EVENT_CONSTRAINT(0xc0, (0xf|(1ULL<<32))), /* INSTRUCTIONS_RETIRED */
-	FIXED_EVENT_CONSTRAINT(0x3c, (0xf|(1ULL<<33))), /* UNHALTED_CORE_CYCLES */
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	/* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
 	INTEL_EVENT_CONSTRAINT(0x40, 0x3), /* L1D_CACHE_LD */
 	INTEL_EVENT_CONSTRAINT(0x41, 0x3), /* L1D_CACHE_ST */
 	INTEL_EVENT_CONSTRAINT(0x42, 0x3), /* L1D_CACHE_LOCK */
@@ -58,8 +66,9 @@
 
 static struct event_constraint intel_westmere_event_constraints[] =
 {
-	FIXED_EVENT_CONSTRAINT(0xc0, (0xf|(1ULL<<32))), /* INSTRUCTIONS_RETIRED */
-	FIXED_EVENT_CONSTRAINT(0x3c, (0xf|(1ULL<<33))), /* UNHALTED_CORE_CYCLES */
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	/* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
 	INTEL_EVENT_CONSTRAINT(0x51, 0x3), /* L1D */
 	INTEL_EVENT_CONSTRAINT(0x60, 0x1), /* OFFCORE_REQUESTS_OUTSTANDING */
 	INTEL_EVENT_CONSTRAINT(0x63, 0x3), /* CACHE_LOCK_CYCLES */
@@ -68,8 +77,9 @@
 
 static struct event_constraint intel_gen_event_constraints[] =
 {
-	FIXED_EVENT_CONSTRAINT(0xc0, (0x3|(1ULL<<32))), /* INSTRUCTIONS_RETIRED */
-	FIXED_EVENT_CONSTRAINT(0x3c, (0x3|(1ULL<<33))), /* UNHALTED_CORE_CYCLES */
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	/* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
 	EVENT_CONSTRAINT_END
 };
 
@@ -580,10 +590,9 @@
 
 	ds->bts_index = ds->bts_buffer_base;
 
+	perf_sample_data_init(&data, 0);
 
 	data.period	= event->hw.last_period;
-	data.addr	= 0;
-	data.raw	= NULL;
 	regs.ip		= 0;
 
 	/*
@@ -732,8 +741,7 @@
 	int bit, loops;
 	u64 ack, status;
 
-	data.addr = 0;
-	data.raw = NULL;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
@@ -935,7 +943,7 @@
 		x86_pmu.event_constraints = intel_nehalem_event_constraints;
 		pr_cont("Nehalem/Corei7 events, ");
 		break;
-	case 28:
+	case 28: /* Atom */
 		memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 
@@ -951,6 +959,7 @@
 		x86_pmu.event_constraints = intel_westmere_event_constraints;
 		pr_cont("Westmere events, ");
 		break;
+
 	default:
 		/*
 		 * default constraints for v2 and up
diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c
index 1ca5ba0..a4e67b9 100644
--- a/arch/x86/kernel/cpu/perf_event_p6.c
+++ b/arch/x86/kernel/cpu/perf_event_p6.c
@@ -62,7 +62,7 @@
 
 	/* p6 only has one enable register */
 	rdmsrl(MSR_P6_EVNTSEL0, val);
-	val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+	val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 	wrmsrl(MSR_P6_EVNTSEL0, val);
 }
 
@@ -72,7 +72,7 @@
 
 	/* p6 only has one enable register */
 	rdmsrl(MSR_P6_EVNTSEL0, val);
-	val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+	val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 	wrmsrl(MSR_P6_EVNTSEL0, val);
 }
 
@@ -83,7 +83,7 @@
 	u64 val = P6_NOP_EVENT;
 
 	if (cpuc->enabled)
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 
 	(void)checking_wrmsrl(hwc->config_base + idx, val);
 }
@@ -95,7 +95,7 @@
 
 	val = hwc->config;
 	if (cpuc->enabled)
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 
 	(void)checking_wrmsrl(hwc->config_base + idx, val);
 }
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 74f4e85..fb329e9 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -680,7 +680,7 @@
 	cpu_nmi_set_wd_enabled();
 
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+	evntsel |= ARCH_PERFMON_EVENTSEL_ENABLE;
 	wrmsr(evntsel_msr, evntsel, 0);
 	intel_arch_wd_ops.checkbit = 1ULL << (eax.split.bit_width - 1);
 	return 1;
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index dce99ab..d5e2a2e 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -120,9 +120,15 @@
 {
 #ifdef CONFIG_FRAME_POINTER
 	struct stack_frame *frame = (struct stack_frame *)bp;
+	unsigned long next;
 
-	if (!in_irq_stack(stack, irq_stack, irq_stack_end))
-		return (unsigned long)frame->next_frame;
+	if (!in_irq_stack(stack, irq_stack, irq_stack_end)) {
+		if (!probe_kernel_address(&frame->next_frame, next))
+			return next;
+		else
+			WARN_ONCE(1, "Perf: bad frame pointer = %p in "
+				  "callchain\n", &frame->next_frame);
+	}
 #endif
 	return bp;
 }
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 2d8b503..3d1e6f1 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -27,7 +27,7 @@
 #define GET_CR2_INTO_RCX movq %cr2, %rcx
 #endif
 
-/* we are not able to switch in one step to the final KERNEL ADRESS SPACE
+/* we are not able to switch in one step to the final KERNEL ADDRESS SPACE
  * because we need identity-mapped pages.
  *
  */
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index dca2802..d6cc065 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -344,13 +344,6 @@
 	}
 
 	/*
-	 * For kernel-addresses, either the address or symbol name can be
-	 * specified.
-	 */
-	if (info->name)
-		info->address = (unsigned long)
-				kallsyms_lookup_name(info->name);
-	/*
 	 * Check that the low-order bits of the address are appropriate
 	 * for the alignment implied by len.
 	 */
@@ -535,8 +528,3 @@
 {
 	/* TODO */
 }
-
-void hw_breakpoint_pmu_unthrottle(struct perf_event *bp)
-{
-	/* TODO */
-}
diff --git a/arch/x86/kernel/k8.c b/arch/x86/kernel/k8.c
index cbc4332..9b89546 100644
--- a/arch/x86/kernel/k8.c
+++ b/arch/x86/kernel/k8.c
@@ -121,3 +121,17 @@
 }
 EXPORT_SYMBOL_GPL(k8_flush_garts);
 
+static __init int init_k8_nbs(void)
+{
+	int err = 0;
+
+	err = cache_k8_northbridges();
+
+	if (err < 0)
+		printk(KERN_NOTICE "K8 NB: Cannot enumerate AMD northbridges.\n");
+
+	return err;
+}
+
+/* This has to go after the PCI subsystem */
+fs_initcall(init_k8_nbs);
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 2bbde60..fb99f7e 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -1309,7 +1309,7 @@
 /*
  * get_tce_space_from_tar():
  * Function for kdump case. Get the tce tables from first kernel
- * by reading the contents of the base adress register of calgary iommu
+ * by reading the contents of the base address register of calgary iommu
  */
 static void __init get_tce_space_from_tar(void)
 {
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1aa966c..a4ac764 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -38,7 +38,7 @@
  * This variable becomes 1 if iommu=pt is passed on the kernel command line.
  * If this variable is 1, IOMMU implementations do no DMA translation for
  * devices and allow every device to access to whole physical memory. This is
- * useful if a user want to use an IOMMU only for KVM device assignment to
+ * useful if a user wants to use an IOMMU only for KVM device assignment to
  * guests and not for driver dma translation.
  */
 int iommu_pass_through __read_mostly;
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index 34de53b..f3af115 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -735,7 +735,7 @@
 	unsigned long scratch;
 	long i;
 
-	if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0)
+	if (num_k8_northbridges == 0)
 		return 0;
 
 #ifndef CONFIG_AGP_AMD64
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 02d6780..ad95406 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -607,7 +607,7 @@
 {
 #ifdef CONFIG_SMP
 	if (pm_idle == poll_idle && smp_num_siblings > 1) {
-		printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
+		printk_once(KERN_WARNING "WARNING: polling idle and HT enabled,"
 			" performance may degrade.\n");
 	}
 #endif
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 2d96aab8..a503b1f 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -581,7 +581,7 @@
 	struct perf_event_attr attr;
 
 	/*
-	 * We shoud have at least an inactive breakpoint at this
+	 * We should have at least an inactive breakpoint at this
 	 * slot. It means the user is writing dr7 without having
 	 * written the address register first
 	 */
diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c
index dee1ff7..196552b 100644
--- a/arch/x86/kernel/sys_i386_32.c
+++ b/arch/x86/kernel/sys_i386_32.c
@@ -25,191 +25,6 @@
 #include <asm/syscalls.h>
 
 /*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/i386 didn't use to be able to handle more than
- * 4 system call parameters, so these system calls used a memory
- * block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
-{
-	struct mmap_arg_struct a;
-	int err = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	err = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	err = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags,
-			a.fd, a.offset >> PAGE_SHIFT);
-out:
-	return err;
-}
-
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set __user *inp, *outp, *exp;
-	struct timeval __user *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc(uint call, int first, int second,
-			int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
-					(const struct timespec __user *)fifth);
-
-	case SEMGET:
-		return sys_semget(first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl(first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd(first, (struct msgbuf __user *) ptr,
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof(tmp)))
-				return -EFAULT;
-			return sys_msgrcv(first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv(first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl(first, second, (struct msqid_ds __user *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat(first, (char __user *) ptr, second, &raddr);
-			if (ret)
-				return ret;
-			return put_user(raddr, (ulong __user *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			/* The "(ulong *) third" is valid _only_ because of the kernel segment thing */
-			return do_shmat(first, (char __user *) ptr, second, (ulong *) third);
-		}
-	case SHMDT:
-		return sys_shmdt((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget(first, second, third);
-	case SHMCTL:
-		return sys_shmctl(first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-
-/*
- * Old cruft
- */
-asmlinkage int sys_uname(struct old_utsname __user *name)
-{
-	int err;
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof(*name));
-	up_read(&uts_sem);
-	return err? -EFAULT:0;
-}
-
-asmlinkage int sys_olduname(struct oldold_utsname __user *name)
-{
-	int error;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
-		return -EFAULT;
-
-	down_read(&uts_sem);
-
-	error = __copy_to_user(&name->sysname, &utsname()->sysname,
-			       __OLD_UTS_LEN);
-	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->release, &utsname()->release,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->release + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->version, &utsname()->version,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->version + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->machine, &utsname()->machine,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->machine + __OLD_UTS_LEN);
-
-	up_read(&uts_sem);
-
-	error = error ? -EFAULT : 0;
-
-	return error;
-}
-
-
-/*
  * Do a system call from kernel instead of calling sys_execve so we
  * end up with proper pt_regs.
  */
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index 8aa2057..ff14a50 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -209,15 +209,3 @@
 
 	return addr;
 }
-
-
-SYSCALL_DEFINE1(uname, struct new_utsname __user *, name)
-{
-	int err;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof(*name));
-	up_read(&uts_sem);
-	if (personality(current->personality) == PER_LINUX32)
-		err |= copy_to_user(&name->machine, "i686", 5);
-	return err ? -EFAULT : 0;
-}
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index 15228b5..8b37293 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -81,7 +81,7 @@
 	.long sys_settimeofday
 	.long sys_getgroups16	/* 80 */
 	.long sys_setgroups16
-	.long old_select
+	.long sys_old_select
 	.long sys_symlink
 	.long sys_lstat
 	.long sys_readlink	/* 85 */
@@ -89,7 +89,7 @@
 	.long sys_swapon
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 208a857..9faf91a 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -50,7 +50,7 @@
 	 *   unstable. We do this because unlike Time Of Day,
 	 *   the scheduler clock tolerates small errors and it's
 	 *   very important for it to be as fast as the platform
-	 *   can achive it. )
+	 *   can achieve it. )
 	 */
 	if (unlikely(tsc_disabled)) {
 		/* No locking but a rare wrong value is not a big deal: */
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index 2f1ca56..5e1ff66 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -167,7 +167,7 @@
 {
 	/* Unfortunately, set_next_event interface only passes relative
 	 * expiry, but we want absolute expiry.  It'd be better if were
-	 * were passed an aboslute expiry, since a bunch of time may
+	 * were passed an absolute expiry, since a bunch of time may
 	 * have been stolen between the time the delta is computed and
 	 * when we set the alarm below. */
 	cycle_t now = vmi_timer_ops.get_cycle_counter(vmi_counter(VMI_ONESHOT));
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 1d4eb93..cf07c26 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -291,8 +291,29 @@
 	 */
 	if (kernel_set_to_readonly &&
 	    within(address, (unsigned long)_text,
-		   (unsigned long)__end_rodata_hpage_align))
-		pgprot_val(forbidden) |= _PAGE_RW;
+		   (unsigned long)__end_rodata_hpage_align)) {
+		unsigned int level;
+
+		/*
+		 * Don't enforce the !RW mapping for the kernel text mapping,
+		 * if the current mapping is already using small page mapping.
+		 * No need to work hard to preserve large page mappings in this
+		 * case.
+		 *
+		 * This also fixes the Linux Xen paravirt guest boot failure
+		 * (because of unexpected read-only mappings for kernel identity
+		 * mappings). In this paravirt guest case, the kernel text
+		 * mapping and the kernel identity mapping share the same
+		 * page-table pages. Thus we can't really use different
+		 * protections for the kernel text and identity mappings. Also,
+		 * these shared mappings are made of small page mappings.
+		 * Thus this don't enforce !RW mapping for small page kernel
+		 * text mapping logic will help Linux Xen parvirt guest boot
+		 * aswell.
+		 */
+		if (lookup_address(address, &level) && (level != PG_LEVEL_4K))
+			pgprot_val(forbidden) |= _PAGE_RW;
+	}
 #endif
 
 	prot = __pgprot(pgprot_val(prot) & ~pgprot_val(forbidden));
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 6a58256..090cbbe 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -46,17 +46,6 @@
 
 static unsigned long reset_value[NUM_VIRT_COUNTERS];
 
-/* IbsFetchCtl bits/masks */
-#define IBS_FETCH_RAND_EN		(1ULL<<57)
-#define IBS_FETCH_VAL			(1ULL<<49)
-#define IBS_FETCH_ENABLE		(1ULL<<48)
-#define IBS_FETCH_CNT_MASK		0xFFFF0000ULL
-
-/* IbsOpCtl bits */
-#define IBS_OP_CNT_CTL			(1ULL<<19)
-#define IBS_OP_VAL			(1ULL<<18)
-#define IBS_OP_ENABLE			(1ULL<<17)
-
 #define IBS_FETCH_SIZE			6
 #define IBS_OP_SIZE			12
 
@@ -182,7 +171,7 @@
 			continue;
 		}
 		rdmsrl(msrs->controls[i].addr, val);
-		if (val & ARCH_PERFMON_EVENTSEL0_ENABLE)
+		if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
 			op_x86_warn_in_use(i);
 		val &= model->reserved;
 		wrmsrl(msrs->controls[i].addr, val);
@@ -290,7 +279,7 @@
 			oprofile_write_commit(&entry);
 
 			/* reenable the IRQ */
-			ctl &= ~(IBS_FETCH_VAL | IBS_FETCH_CNT_MASK);
+			ctl &= ~(IBS_FETCH_VAL | IBS_FETCH_CNT);
 			ctl |= IBS_FETCH_ENABLE;
 			wrmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
 		}
@@ -330,7 +319,7 @@
 		return;
 
 	if (ibs_config.fetch_enabled) {
-		val = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
+		val = (ibs_config.max_cnt_fetch >> 4) & IBS_FETCH_MAX_CNT;
 		val |= ibs_config.rand_en ? IBS_FETCH_RAND_EN : 0;
 		val |= IBS_FETCH_ENABLE;
 		wrmsrl(MSR_AMD64_IBSFETCHCTL, val);
@@ -352,7 +341,7 @@
 			 * avoid underflows.
 			 */
 			ibs_op_ctl = min(ibs_op_ctl + IBS_RANDOM_MAXCNT_OFFSET,
-					 0xFFFFULL);
+					 IBS_OP_MAX_CNT);
 		}
 		if (ibs_caps & IBS_CAPS_OPCNT && ibs_config.dispatched_ops)
 			ibs_op_ctl |= IBS_OP_CNT_CTL;
@@ -409,7 +398,7 @@
 		if (!reset_value[op_x86_phys_to_virt(i)])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(msrs->controls[i].addr, val);
 	}
 
@@ -429,7 +418,7 @@
 		if (!reset_value[op_x86_phys_to_virt(i)])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
-		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(msrs->controls[i].addr, val);
 	}
 
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 5d1727b..2bf90fa 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -88,7 +88,7 @@
 			continue;
 		}
 		rdmsrl(msrs->controls[i].addr, val);
-		if (val & ARCH_PERFMON_EVENTSEL0_ENABLE)
+		if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
 			op_x86_warn_in_use(i);
 		val &= model->reserved;
 		wrmsrl(msrs->controls[i].addr, val);
@@ -166,7 +166,7 @@
 	for (i = 0; i < num_counters; ++i) {
 		if (reset_value[i]) {
 			rdmsrl(msrs->controls[i].addr, val);
-			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+			val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 			wrmsrl(msrs->controls[i].addr, val);
 		}
 	}
@@ -184,7 +184,7 @@
 		if (!reset_value[i])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
-		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(msrs->controls[i].addr, val);
 	}
 }
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 563d205..deafb65 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -361,7 +361,7 @@
 		alternatives_smp_switch(0);
 }
 
-static void __cpuinit xen_play_dead(void) /* used only with CPU_HOTPLUG */
+static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */
 {
 	play_dead_common();
 	HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
diff --git a/arch/xtensa/include/asm/pci.h b/arch/xtensa/include/asm/pci.h
index 66410ac..4609b0f 100644
--- a/arch/xtensa/include/asm/pci.h
+++ b/arch/xtensa/include/asm/pci.h
@@ -56,14 +56,6 @@
 
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
-/* pci_unmap_{page,single} is a no-op, so */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_ubnmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
 /* Map a range of PCI memory or I/O space for a device into user space */
 int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
                         enum pci_mmap_state mmap_state, int write_combine);
diff --git a/arch/xtensa/include/asm/ptrace.h b/arch/xtensa/include/asm/ptrace.h
index 905e1e6..3c549f7 100644
--- a/arch/xtensa/include/asm/ptrace.h
+++ b/arch/xtensa/include/asm/ptrace.h
@@ -113,6 +113,7 @@
 
 #include <variant/core.h>
 
+# define arch_has_single_step()	(1)
 # define task_pt_regs(tsk) ((struct pt_regs*) \
   (task_stack_page(tsk) + KERNEL_STACK_SIZE - (XCHAL_NUM_AREGS-16)*4) - 1)
 # define user_mode(regs) (((regs)->ps & 0x00000020)!=0)
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 80d24c4..77fc9f6 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -104,7 +104,7 @@
  *   excsave has been restored, and
  *   stack pointer (a1) has been set.
  *
- * Note: _user_exception might be at an odd adress. Don't use call0..call12
+ * Note: _user_exception might be at an odd address. Don't use call0..call12
  */
 
 ENTRY(user_exception)
@@ -244,7 +244,7 @@
  *   excsave has been restored, and
  *   stack pointer (a1) has been set.
  *
- * Note: _kernel_exception might be at an odd adress. Don't use call0..call12
+ * Note: _kernel_exception might be at an odd address. Don't use call0..call12
  */
 
 ENTRY(kernel_exception)
diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c
index 9486882..9d4e1ce 100644
--- a/arch/xtensa/kernel/ptrace.c
+++ b/arch/xtensa/kernel/ptrace.c
@@ -30,6 +30,17 @@
 #include <asm/elf.h>
 #include <asm/coprocessor.h>
 
+
+void user_enable_single_step(struct task_struct *child)
+{
+	child->ptrace |= PT_SINGLESTEP;
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	child->ptrace &= ~PT_SINGLESTEP;
+}
+
 /*
  * Called by kernel/ptrace.c when detaching to disable single stepping.
  */
@@ -268,51 +279,6 @@
 		ret = ptrace_pokeusr(child, addr, data);
 		break;
 
-	/* continue and stop at next (return from) syscall */
-
-	case PTRACE_SYSCALL:
-	case PTRACE_CONT: /* restart after signal. */
-	{
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		/* Make sure the single step bit is not set. */
-		child->ptrace &= ~PT_SINGLESTEP;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		child->ptrace &= ~PT_SINGLESTEP;
-		wake_up_process(child);
-		break;
-
-	case PTRACE_SINGLESTEP:
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->ptrace |= PT_SINGLESTEP;
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-
 	case PTRACE_GETREGS:
 		ret = ptrace_getregs(child, (void __user *) data);
 		break;
diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched
index b71abfb..fc71cf07 100644
--- a/block/Kconfig.iosched
+++ b/block/Kconfig.iosched
@@ -23,6 +23,7 @@
 
 config IOSCHED_CFQ
 	tristate "CFQ I/O scheduler"
+	select BLK_CGROUP if CFQ_GROUP_IOSCHED
 	default y
 	---help---
 	  The CFQ I/O scheduler tries to distribute bandwidth equally
@@ -35,7 +36,6 @@
 config CFQ_GROUP_IOSCHED
 	bool "CFQ Group Scheduling support"
 	depends on IOSCHED_CFQ && CGROUPS
-	select BLK_CGROUP
 	default n
 	---help---
 	  Enable group IO scheduling in CFQ.
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index c85d74c..4b686ad 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -23,6 +23,31 @@
 struct blkio_cgroup blkio_root_cgroup = { .weight = 2*BLKIO_WEIGHT_DEFAULT };
 EXPORT_SYMBOL_GPL(blkio_root_cgroup);
 
+static struct cgroup_subsys_state *blkiocg_create(struct cgroup_subsys *,
+						  struct cgroup *);
+static int blkiocg_can_attach(struct cgroup_subsys *, struct cgroup *,
+			      struct task_struct *, bool);
+static void blkiocg_attach(struct cgroup_subsys *, struct cgroup *,
+			   struct cgroup *, struct task_struct *, bool);
+static void blkiocg_destroy(struct cgroup_subsys *, struct cgroup *);
+static int blkiocg_populate(struct cgroup_subsys *, struct cgroup *);
+
+struct cgroup_subsys blkio_subsys = {
+	.name = "blkio",
+	.create = blkiocg_create,
+	.can_attach = blkiocg_can_attach,
+	.attach = blkiocg_attach,
+	.destroy = blkiocg_destroy,
+	.populate = blkiocg_populate,
+#ifdef CONFIG_BLK_CGROUP
+	/* note: blkio_subsys_id is otherwise defined in blk-cgroup.h */
+	.subsys_id = blkio_subsys_id,
+#endif
+	.use_id = 1,
+	.module = THIS_MODULE,
+};
+EXPORT_SYMBOL_GPL(blkio_subsys);
+
 struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup)
 {
 	return container_of(cgroup_subsys_state(cgroup, blkio_subsys_id),
@@ -253,7 +278,8 @@
 done:
 	free_css_id(&blkio_subsys, &blkcg->css);
 	rcu_read_unlock();
-	kfree(blkcg);
+	if (blkcg != &blkio_root_cgroup)
+		kfree(blkcg);
 }
 
 static struct cgroup_subsys_state *
@@ -319,17 +345,6 @@
 	task_unlock(tsk);
 }
 
-struct cgroup_subsys blkio_subsys = {
-	.name = "blkio",
-	.create = blkiocg_create,
-	.can_attach = blkiocg_can_attach,
-	.attach = blkiocg_attach,
-	.destroy = blkiocg_destroy,
-	.populate = blkiocg_populate,
-	.subsys_id = blkio_subsys_id,
-	.use_id = 1,
-};
-
 void blkio_policy_register(struct blkio_policy_type *blkiop)
 {
 	spin_lock(&blkio_list_lock);
@@ -345,3 +360,17 @@
 	spin_unlock(&blkio_list_lock);
 }
 EXPORT_SYMBOL_GPL(blkio_policy_unregister);
+
+static int __init init_cgroup_blkio(void)
+{
+	return cgroup_load_subsys(&blkio_subsys);
+}
+
+static void __exit exit_cgroup_blkio(void)
+{
+	cgroup_unload_subsys(&blkio_subsys);
+}
+
+module_init(init_cgroup_blkio);
+module_exit(exit_cgroup_blkio);
+MODULE_LICENSE("GPL");
diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h
index 84bf745..8ccc204 100644
--- a/block/blk-cgroup.h
+++ b/block/blk-cgroup.h
@@ -15,7 +15,13 @@
 
 #include <linux/cgroup.h>
 
-#ifdef CONFIG_BLK_CGROUP
+#if defined(CONFIG_BLK_CGROUP) || defined(CONFIG_BLK_CGROUP_MODULE)
+
+#ifndef CONFIG_BLK_CGROUP
+/* When blk-cgroup is a module, its subsys_id isn't a compile-time constant */
+extern struct cgroup_subsys blkio_subsys;
+#define blkio_subsys_id blkio_subsys.subsys_id
+#endif
 
 struct blkio_cgroup {
 	struct cgroup_subsys_state css;
@@ -91,7 +97,7 @@
 			struct blkio_group *blkg, unsigned long dequeue) {}
 #endif
 
-#ifdef CONFIG_BLK_CGROUP
+#if defined(CONFIG_BLK_CGROUP) || defined(CONFIG_BLK_CGROUP_MODULE)
 extern struct blkio_cgroup blkio_root_cgroup;
 extern struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup);
 extern void blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 15c6308..96e83c2 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -278,7 +278,7 @@
 	NULL,
 };
 
-static struct sysfs_ops integrity_ops = {
+static const struct sysfs_ops integrity_ops = {
 	.show	= &integrity_attr_show,
 	.store	= &integrity_attr_store,
 };
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index fad8655..4426739 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -475,7 +475,7 @@
 	kmem_cache_free(blk_requestq_cachep, q);
 }
 
-static struct sysfs_ops queue_sysfs_ops = {
+static const struct sysfs_ops queue_sysfs_ops = {
 	.show	= queue_attr_show,
 	.store	= queue_attr_store,
 };
diff --git a/block/bsg.c b/block/bsg.c
index a9fd2d8..46597a6 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -260,7 +260,7 @@
 		return ERR_PTR(ret);
 
 	/*
-	 * map scatter-gather elements seperately and string them to request
+	 * map scatter-gather elements separately and string them to request
 	 */
 	rq = blk_get_request(q, rw, GFP_KERNEL);
 	if (!rq)
diff --git a/block/elevator.c b/block/elevator.c
index ee3a883..df75676 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -892,7 +892,7 @@
 	return error;
 }
 
-static struct sysfs_ops elv_sysfs_ops = {
+static const struct sysfs_ops elv_sysfs_ops = {
 	.show	= elv_attr_show,
 	.store	= elv_attr_store,
 };
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 6a2e295..403857a 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -826,8 +826,8 @@
 	help
 	  This option enables the generic pseudo random number generator
 	  for cryptographic modules.  Uses the Algorithm specified in
-	  ANSI X9.31 A.2.4. Not this option must be enabled if CRYPTO_FIPS 
-	  is selected
+	  ANSI X9.31 A.2.4. Note that this option must be enabled if
+	  CRYPTO_FIPS is selected
 
 source "drivers/crypto/Kconfig"
 
diff --git a/drivers/Makefile b/drivers/Makefile
index 81e3659..34f1e10 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -99,6 +99,7 @@
 obj-y				+= firmware/
 obj-$(CONFIG_CRYPTO)		+= crypto/
 obj-$(CONFIG_SUPERH)		+= sh/
+obj-$(CONFIG_ARCH_SHMOBILE)	+= sh/
 obj-$(CONFIG_GENERIC_TIME)	+= clocksource/
 obj-$(CONFIG_DMA_ENGINE)	+= dma/
 obj-$(CONFIG_DCA)		+= dca/
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 66cc3f3..a8d8998 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -32,7 +32,7 @@
 #
 acpi-y				+= bus.o glue.o
 acpi-y				+= scan.o
-acpi-y				+= processor_pdc.o
+acpi-y				+= processor_core.o
 acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
 acpi-y				+= pci_root.o pci_link.o pci_irq.o pci_bind.o
@@ -61,7 +61,7 @@
 obj-$(CONFIG_ACPI_POWER_METER)	+= power_meter.o
 
 # processor has its own "processor." module_param namespace
-processor-y			:= processor_core.o processor_throttling.o
+processor-y			:= processor_driver.o processor_throttling.o
 processor-y			+= processor_idle.o processor_thermal.o
 processor-$(CONFIG_CPU_FREQ)	+= processor_perflib.o
 
diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c
index cc8a102..7116bc8 100644
--- a/drivers/acpi/acpica/exmutex.c
+++ b/drivers/acpi/acpica/exmutex.c
@@ -375,8 +375,7 @@
 		return_ACPI_STATUS(AE_AML_MUTEX_NOT_ACQUIRED);
 	}
 
-	/* Must have a valid thread ID */
-
+	/* Must have a valid thread. */
 	if (!walk_state->thread) {
 		ACPI_ERROR((AE_INFO,
 			    "Cannot release Mutex [%4.4s], null thread info",
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 58d2c91..75f39f2 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -54,6 +54,7 @@
 #define ACPI_BATTERY_DEVICE_NAME	"Battery"
 #define ACPI_BATTERY_NOTIFY_STATUS	0x80
 #define ACPI_BATTERY_NOTIFY_INFO	0x81
+#define ACPI_BATTERY_NOTIFY_THRESHOLD   0x82
 
 #define _COMPONENT		ACPI_BATTERY_COMPONENT
 
@@ -88,10 +89,15 @@
 
 MODULE_DEVICE_TABLE(acpi, battery_device_ids);
 
-/* For buggy DSDTs that report negative 16-bit values for either charging
- * or discharging current and/or report 0 as 65536 due to bad math.
- */
-#define QUIRK_SIGNED16_CURRENT 0x0001
+enum {
+	ACPI_BATTERY_ALARM_PRESENT,
+	ACPI_BATTERY_XINFO_PRESENT,
+	/* For buggy DSDTs that report negative 16-bit values for either
+	 * charging or discharging current and/or report 0 as 65536
+	 * due to bad math.
+	 */
+	ACPI_BATTERY_QUIRK_SIGNED16_CURRENT,
+};
 
 struct acpi_battery {
 	struct mutex lock;
@@ -109,6 +115,12 @@
 	int design_voltage;
 	int design_capacity_warning;
 	int design_capacity_low;
+	int cycle_count;
+	int measurement_accuracy;
+	int max_sampling_time;
+	int min_sampling_time;
+	int max_averaging_interval;
+	int min_averaging_interval;
 	int capacity_granularity_1;
 	int capacity_granularity_2;
 	int alarm;
@@ -118,8 +130,7 @@
 	char oem_info[32];
 	int state;
 	int power_unit;
-	u8 alarm_present;
-	long quirks;
+	unsigned long flags;
 };
 
 #define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
@@ -198,6 +209,9 @@
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
 		val->intval = acpi_battery_technology(battery);
 		break;
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+		val->intval = battery->cycle_count;
+		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 		val->intval = battery->design_voltage * 1000;
 		break;
@@ -239,6 +253,7 @@
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
@@ -254,6 +269,7 @@
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
@@ -305,6 +321,28 @@
 	{offsetof(struct acpi_battery, oem_info), 1},
 };
 
+static struct acpi_offsets extended_info_offsets[] = {
+	{offsetof(struct acpi_battery, power_unit), 0},
+	{offsetof(struct acpi_battery, design_capacity), 0},
+	{offsetof(struct acpi_battery, full_charge_capacity), 0},
+	{offsetof(struct acpi_battery, technology), 0},
+	{offsetof(struct acpi_battery, design_voltage), 0},
+	{offsetof(struct acpi_battery, design_capacity_warning), 0},
+	{offsetof(struct acpi_battery, design_capacity_low), 0},
+	{offsetof(struct acpi_battery, cycle_count), 0},
+	{offsetof(struct acpi_battery, measurement_accuracy), 0},
+	{offsetof(struct acpi_battery, max_sampling_time), 0},
+	{offsetof(struct acpi_battery, min_sampling_time), 0},
+	{offsetof(struct acpi_battery, max_averaging_interval), 0},
+	{offsetof(struct acpi_battery, min_averaging_interval), 0},
+	{offsetof(struct acpi_battery, capacity_granularity_1), 0},
+	{offsetof(struct acpi_battery, capacity_granularity_2), 0},
+	{offsetof(struct acpi_battery, model_number), 1},
+	{offsetof(struct acpi_battery, serial_number), 1},
+	{offsetof(struct acpi_battery, type), 1},
+	{offsetof(struct acpi_battery, oem_info), 1},
+};
+
 static int extract_package(struct acpi_battery *battery,
 			   union acpi_object *package,
 			   struct acpi_offsets *offsets, int num)
@@ -350,22 +388,29 @@
 {
 	int result = -EFAULT;
 	acpi_status status = 0;
+	char *name = test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags)?
+			"_BIX" : "_BIF";
+
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 
 	if (!acpi_battery_present(battery))
 		return 0;
 	mutex_lock(&battery->lock);
-	status = acpi_evaluate_object(battery->device->handle, "_BIF",
-				      NULL, &buffer);
+	status = acpi_evaluate_object(battery->device->handle, name,
+						NULL, &buffer);
 	mutex_unlock(&battery->lock);
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BIF"));
+		ACPI_EXCEPTION((AE_INFO, status, "Evaluating %s", name));
 		return -ENODEV;
 	}
-
-	result = extract_package(battery, buffer.pointer,
-				 info_offsets, ARRAY_SIZE(info_offsets));
+	if (test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags))
+		result = extract_package(battery, buffer.pointer,
+				extended_info_offsets,
+				ARRAY_SIZE(extended_info_offsets));
+	else
+		result = extract_package(battery, buffer.pointer,
+				info_offsets, ARRAY_SIZE(info_offsets));
 	kfree(buffer.pointer);
 	return result;
 }
@@ -399,7 +444,7 @@
 	battery->update_time = jiffies;
 	kfree(buffer.pointer);
 
-	if ((battery->quirks & QUIRK_SIGNED16_CURRENT) &&
+	if (test_bit(ACPI_BATTERY_QUIRK_SIGNED16_CURRENT, &battery->flags) &&
 	    battery->rate_now != -1)
 		battery->rate_now = abs((s16)battery->rate_now);
 
@@ -412,7 +457,8 @@
 	union acpi_object arg0 = { .type = ACPI_TYPE_INTEGER };
 	struct acpi_object_list arg_list = { 1, &arg0 };
 
-	if (!acpi_battery_present(battery)|| !battery->alarm_present)
+	if (!acpi_battery_present(battery) ||
+	    !test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags))
 		return -ENODEV;
 
 	arg0.integer.value = battery->alarm;
@@ -437,10 +483,10 @@
 	/* See if alarms are supported, and if so, set default */
 	status = acpi_get_handle(battery->device->handle, "_BTP", &handle);
 	if (ACPI_FAILURE(status)) {
-		battery->alarm_present = 0;
+		clear_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags);
 		return 0;
 	}
-	battery->alarm_present = 1;
+	set_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags);
 	if (!battery->alarm)
 		battery->alarm = battery->design_capacity_warning;
 	return acpi_battery_set_alarm(battery);
@@ -510,9 +556,8 @@
 
 static void acpi_battery_quirks(struct acpi_battery *battery)
 {
-	battery->quirks = 0;
 	if (dmi_name_in_vendors("Acer") && battery->power_unit) {
-		battery->quirks |= QUIRK_SIGNED16_CURRENT;
+		set_bit(ACPI_BATTERY_QUIRK_SIGNED16_CURRENT, &battery->flags);
 	}
 }
 
@@ -590,6 +635,7 @@
 	seq_printf(seq, "design capacity low:     %d %sh\n",
 		   battery->design_capacity_low,
 		   acpi_battery_units(battery));
+	seq_printf(seq, "cycle count:		  %i\n", battery->cycle_count);
 	seq_printf(seq, "capacity granularity 1:  %d %sh\n",
 		   battery->capacity_granularity_1,
 		   acpi_battery_units(battery));
@@ -841,6 +887,7 @@
 {
 	int result = 0;
 	struct acpi_battery *battery = NULL;
+	acpi_handle handle;
 	if (!device)
 		return -EINVAL;
 	battery = kzalloc(sizeof(struct acpi_battery), GFP_KERNEL);
@@ -851,6 +898,9 @@
 	strcpy(acpi_device_class(device), ACPI_BATTERY_CLASS);
 	device->driver_data = battery;
 	mutex_init(&battery->lock);
+	if (ACPI_SUCCESS(acpi_get_handle(battery->device->handle,
+			"_BIX", &handle)))
+		set_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags);
 	acpi_battery_update(battery);
 #ifdef CONFIG_ACPI_PROCFS_POWER
 	result = acpi_battery_add_fs(device);
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index a52126e..b70cd37 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -190,16 +190,16 @@
 		 * Get the device's power state either directly (via _PSC) or
 		 * indirectly (via power resources).
 		 */
-		if (device->power.flags.explicit_get) {
+		if (device->power.flags.power_resources) {
+			result = acpi_power_get_inferred_state(device);
+			if (result)
+				return result;
+		} else if (device->power.flags.explicit_get) {
 			status = acpi_evaluate_integer(device->handle, "_PSC",
 						       NULL, &psc);
 			if (ACPI_FAILURE(status))
 				return -ENODEV;
 			device->power.state = (int)psc;
-		} else if (device->power.flags.power_resources) {
-			result = acpi_power_get_inferred_state(device);
-			if (result)
-				return result;
 		}
 
 		*state = device->power.state;
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index b2586f5..d9a85f1 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -605,7 +605,7 @@
 	list_for_each_entry(dock_station, &dock_stations, sibling) {
 		/*
 		 * An ATA bay can be in a dock and itself can be ejected
-		 * seperately, so there are two 'dock stations' which need the
+		 * separately, so there are two 'dock stations' which need the
 		 * ops
 		 */
 		dd = find_dock_dependent_device(dock_station, handle);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index d7a6bbb..1ac28c6 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -76,8 +76,9 @@
 enum {
 	EC_FLAGS_QUERY_PENDING,		/* Query is pending */
 	EC_FLAGS_GPE_STORM,		/* GPE storm detected */
-	EC_FLAGS_HANDLERS_INSTALLED	/* Handlers for GPE and
+	EC_FLAGS_HANDLERS_INSTALLED,	/* Handlers for GPE and
 					 * OpReg are installed */
+	EC_FLAGS_FROZEN,		/* Transactions are suspended */
 };
 
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
@@ -291,6 +292,10 @@
 	if (t->rdata)
 		memset(t->rdata, 0, t->rlen);
 	mutex_lock(&ec->lock);
+	if (test_bit(EC_FLAGS_FROZEN, &ec->flags)) {
+		status = -EINVAL;
+		goto unlock;
+	}
 	if (ec->global_lock) {
 		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
 		if (ACPI_FAILURE(status)) {
@@ -453,6 +458,32 @@
 
 EXPORT_SYMBOL(ec_transaction);
 
+void acpi_ec_suspend_transactions(void)
+{
+	struct acpi_ec *ec = first_ec;
+
+	if (!ec)
+		return;
+
+	mutex_lock(&ec->lock);
+	/* Prevent transactions from being carried out */
+	set_bit(EC_FLAGS_FROZEN, &ec->flags);
+	mutex_unlock(&ec->lock);
+}
+
+void acpi_ec_resume_transactions(void)
+{
+	struct acpi_ec *ec = first_ec;
+
+	if (!ec)
+		return;
+
+	mutex_lock(&ec->lock);
+	/* Allow transactions to be carried out again */
+	clear_bit(EC_FLAGS_FROZEN, &ec->flags);
+	mutex_unlock(&ec->lock);
+}
+
 static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data)
 {
 	int result;
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 9c4c962..e284113 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -49,6 +49,8 @@
 int acpi_ec_init(void);
 int acpi_ec_ecdt_probe(void);
 int acpi_boot_ec_enable(void);
+void acpi_ec_suspend_transactions(void);
+void acpi_ec_resume_transactions(void);
 
 /*--------------------------------------------------------------------------
                                   Suspend/Resume
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index d0d25e2..1ac678d 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -435,7 +435,7 @@
 				found_dev->wakeup.gpe_device)) {
 				printk(KERN_WARNING
 				       "ACPI: '%s' and '%s' have the same GPE, "
-				       "can't disable/enable one seperately\n",
+				       "can't disable/enable one separately\n",
 				       dev->pnp.bus_id, found_dev->pnp.bus_id);
 				dev->wakeup.state.enabled =
 				    found_dev->wakeup.state.enabled;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index e9b7b40..791ac7b 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -1,383 +1,62 @@
 /*
- * acpi_processor.c - ACPI Processor Driver ($Revision: 71 $)
+ * Copyright (C) 2005 Intel Corporation
+ * Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
  *
- *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
- *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
- *  Copyright (C) 2004       Dominik Brodowski <linux@brodo.de>
- *  Copyright (C) 2004  Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
- *  			- Added processor hotplug support
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or (at
- *  your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *  TBD:
- *	1. Make # power states dynamic.
- *	2. Support duty_cycle values that span bit 4.
- *	3. Optimize by having scheduler determine business instead of
- *	   having us try to calculate it here.
- *	4. Need C1 timing -- must modify kernel (IRQ handler) to get this.
+ *	Alex Chiang <achiang@hp.com>
+ *	- Unified x86/ia64 implementations
+ *	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ *	- Added _PDC for platforms with Intel CPUs
  */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
 #include <linux/dmi.h>
-#include <linux/moduleparam.h>
-#include <linux/cpuidle.h>
 
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/cpu.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
-#include <asm/smp.h>
-#include <asm/acpi.h>
-
-#include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 #include <acpi/processor.h>
 
-#define PREFIX "ACPI: "
+#include "internal.h"
 
-#define ACPI_PROCESSOR_CLASS		"processor"
-#define ACPI_PROCESSOR_DEVICE_NAME	"Processor"
-#define ACPI_PROCESSOR_FILE_INFO	"info"
-#define ACPI_PROCESSOR_FILE_THROTTLING	"throttling"
-#define ACPI_PROCESSOR_FILE_LIMIT	"limit"
-#define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80
-#define ACPI_PROCESSOR_NOTIFY_POWER	0x81
-#define ACPI_PROCESSOR_NOTIFY_THROTTLING	0x82
-
-#define ACPI_PROCESSOR_LIMIT_USER	0
-#define ACPI_PROCESSOR_LIMIT_THERMAL	1
-
+#define PREFIX			"ACPI: "
 #define _COMPONENT		ACPI_PROCESSOR_COMPONENT
 ACPI_MODULE_NAME("processor_core");
 
-MODULE_AUTHOR("Paul Diefenbaugh");
-MODULE_DESCRIPTION("ACPI Processor Driver");
-MODULE_LICENSE("GPL");
+static int set_no_mwait(const struct dmi_system_id *id)
+{
+	printk(KERN_NOTICE PREFIX "%s detected - "
+		"disabling mwait for CPU C-states\n", id->ident);
+	idle_nomwait = 1;
+	return 0;
+}
 
-static int acpi_processor_add(struct acpi_device *device);
-static int acpi_processor_remove(struct acpi_device *device, int type);
-#ifdef CONFIG_ACPI_PROCFS
-static int acpi_processor_info_open_fs(struct inode *inode, struct file *file);
-#endif
-static void acpi_processor_notify(struct acpi_device *device, u32 event);
-static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu);
-static int acpi_processor_handle_eject(struct acpi_processor *pr);
-
-
-static const struct acpi_device_id processor_device_ids[] = {
-	{ACPI_PROCESSOR_OBJECT_HID, 0},
-	{"ACPI0007", 0},
-	{"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, processor_device_ids);
-
-static struct acpi_driver acpi_processor_driver = {
-	.name = "processor",
-	.class = ACPI_PROCESSOR_CLASS,
-	.ids = processor_device_ids,
-	.ops = {
-		.add = acpi_processor_add,
-		.remove = acpi_processor_remove,
-		.suspend = acpi_processor_suspend,
-		.resume = acpi_processor_resume,
-		.notify = acpi_processor_notify,
-		},
+static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = {
+	{
+	set_no_mwait, "IFL91 board", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
+	DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"),
+	DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"),
+	DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL},
+	{
+	set_no_mwait, "Extensa 5220", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+	DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+	DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
+	DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
+	{},
 };
 
-#define INSTALL_NOTIFY_HANDLER		1
-#define UNINSTALL_NOTIFY_HANDLER	2
-#ifdef CONFIG_ACPI_PROCFS
-static const struct file_operations acpi_processor_info_fops = {
-	.owner = THIS_MODULE,
-	.open = acpi_processor_info_open_fs,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-#endif
-
-DEFINE_PER_CPU(struct acpi_processor *, processors);
-EXPORT_PER_CPU_SYMBOL(processors);
-
-struct acpi_processor_errata errata __read_mostly;
-
-/* --------------------------------------------------------------------------
-                                Errata Handling
-   -------------------------------------------------------------------------- */
-
-static int acpi_processor_errata_piix4(struct pci_dev *dev)
-{
-	u8 value1 = 0;
-	u8 value2 = 0;
-
-
-	if (!dev)
-		return -EINVAL;
-
-	/*
-	 * Note that 'dev' references the PIIX4 ACPI Controller.
-	 */
-
-	switch (dev->revision) {
-	case 0:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
-		break;
-	case 1:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n"));
-		break;
-	case 2:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n"));
-		break;
-	case 3:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n"));
-		break;
-	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n"));
-		break;
-	}
-
-	switch (dev->revision) {
-
-	case 0:		/* PIIX4 A-step */
-	case 1:		/* PIIX4 B-step */
-		/*
-		 * See specification changes #13 ("Manual Throttle Duty Cycle")
-		 * and #14 ("Enabling and Disabling Manual Throttle"), plus
-		 * erratum #5 ("STPCLK# Deassertion Time") from the January
-		 * 2002 PIIX4 specification update.  Applies to only older
-		 * PIIX4 models.
-		 */
-		errata.piix4.throttle = 1;
-
-	case 2:		/* PIIX4E */
-	case 3:		/* PIIX4M */
-		/*
-		 * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA
-		 * Livelock") from the January 2002 PIIX4 specification update.
-		 * Applies to all PIIX4 models.
-		 */
-
-		/*
-		 * BM-IDE
-		 * ------
-		 * Find the PIIX4 IDE Controller and get the Bus Master IDE
-		 * Status register address.  We'll use this later to read
-		 * each IDE controller's DMA status to make sure we catch all
-		 * DMA activity.
-		 */
-		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
-				     PCI_DEVICE_ID_INTEL_82371AB,
-				     PCI_ANY_ID, PCI_ANY_ID, NULL);
-		if (dev) {
-			errata.piix4.bmisx = pci_resource_start(dev, 4);
-			pci_dev_put(dev);
-		}
-
-		/*
-		 * Type-F DMA
-		 * ----------
-		 * Find the PIIX4 ISA Controller and read the Motherboard
-		 * DMA controller's status to see if Type-F (Fast) DMA mode
-		 * is enabled (bit 7) on either channel.  Note that we'll
-		 * disable C3 support if this is enabled, as some legacy
-		 * devices won't operate well if fast DMA is disabled.
-		 */
-		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
-				     PCI_DEVICE_ID_INTEL_82371AB_0,
-				     PCI_ANY_ID, PCI_ANY_ID, NULL);
-		if (dev) {
-			pci_read_config_byte(dev, 0x76, &value1);
-			pci_read_config_byte(dev, 0x77, &value2);
-			if ((value1 & 0x80) || (value2 & 0x80))
-				errata.piix4.fdma = 1;
-			pci_dev_put(dev);
-		}
-
-		break;
-	}
-
-	if (errata.piix4.bmisx)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Bus master activity detection (BM-IDE) erratum enabled\n"));
-	if (errata.piix4.fdma)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Type-F DMA livelock erratum (C3 disabled)\n"));
-
-	return 0;
-}
-
-static int acpi_processor_errata(struct acpi_processor *pr)
-{
-	int result = 0;
-	struct pci_dev *dev = NULL;
-
-
-	if (!pr)
-		return -EINVAL;
-
-	/*
-	 * PIIX4
-	 */
-	dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
-			     PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID,
-			     PCI_ANY_ID, NULL);
-	if (dev) {
-		result = acpi_processor_errata_piix4(dev);
-		pci_dev_put(dev);
-	}
-
-	return result;
-}
-
-/* --------------------------------------------------------------------------
-                              FS Interface (/proc)
-   -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI_PROCFS
-static struct proc_dir_entry *acpi_processor_dir = NULL;
-
-static int acpi_processor_info_seq_show(struct seq_file *seq, void *offset)
-{
-	struct acpi_processor *pr = seq->private;
-
-
-	if (!pr)
-		goto end;
-
-	seq_printf(seq, "processor id:            %d\n"
-		   "acpi id:                 %d\n"
-		   "bus mastering control:   %s\n"
-		   "power management:        %s\n"
-		   "throttling control:      %s\n"
-		   "limit interface:         %s\n",
-		   pr->id,
-		   pr->acpi_id,
-		   pr->flags.bm_control ? "yes" : "no",
-		   pr->flags.power ? "yes" : "no",
-		   pr->flags.throttling ? "yes" : "no",
-		   pr->flags.limit ? "yes" : "no");
-
-      end:
-	return 0;
-}
-
-static int acpi_processor_info_open_fs(struct inode *inode, struct file *file)
-{
-	return single_open(file, acpi_processor_info_seq_show,
-			   PDE(inode)->data);
-}
-
-static int __cpuinit acpi_processor_add_fs(struct acpi_device *device)
-{
-	struct proc_dir_entry *entry = NULL;
-
-
-	if (!acpi_device_dir(device)) {
-		acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
-						     acpi_processor_dir);
-		if (!acpi_device_dir(device))
-			return -ENODEV;
-	}
-
-	/* 'info' [R] */
-	entry = proc_create_data(ACPI_PROCESSOR_FILE_INFO,
-				 S_IRUGO, acpi_device_dir(device),
-				 &acpi_processor_info_fops,
-				 acpi_driver_data(device));
-	if (!entry)
-		return -EIO;
-
-	/* 'throttling' [R/W] */
-	entry = proc_create_data(ACPI_PROCESSOR_FILE_THROTTLING,
-				 S_IFREG | S_IRUGO | S_IWUSR,
-				 acpi_device_dir(device),
-				 &acpi_processor_throttling_fops,
-				 acpi_driver_data(device));
-	if (!entry)
-		return -EIO;
-
-	/* 'limit' [R/W] */
-	entry = proc_create_data(ACPI_PROCESSOR_FILE_LIMIT,
-				 S_IFREG | S_IRUGO | S_IWUSR,
-				 acpi_device_dir(device),
-				 &acpi_processor_limit_fops,
-				 acpi_driver_data(device));
-	if (!entry)
-		return -EIO;
-	return 0;
-}
-static int acpi_processor_remove_fs(struct acpi_device *device)
-{
-
-	if (acpi_device_dir(device)) {
-		remove_proc_entry(ACPI_PROCESSOR_FILE_INFO,
-				  acpi_device_dir(device));
-		remove_proc_entry(ACPI_PROCESSOR_FILE_THROTTLING,
-				  acpi_device_dir(device));
-		remove_proc_entry(ACPI_PROCESSOR_FILE_LIMIT,
-				  acpi_device_dir(device));
-		remove_proc_entry(acpi_device_bid(device), acpi_processor_dir);
-		acpi_device_dir(device) = NULL;
-	}
-
-	return 0;
-}
-#else
-static inline int acpi_processor_add_fs(struct acpi_device *device)
-{
-	return 0;
-}
-static inline int acpi_processor_remove_fs(struct acpi_device *device)
-{
-	return 0;
-}
-#endif
-
-/* Use the acpiid in MADT to map cpus in case of SMP */
-
-#ifndef CONFIG_SMP
-static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { return -1; }
-#else
-
-static struct acpi_table_madt *madt;
-
+#ifdef CONFIG_SMP
 static int map_lapic_id(struct acpi_subtable_header *entry,
 		 u32 acpi_id, int *apic_id)
 {
 	struct acpi_madt_local_apic *lapic =
 		(struct acpi_madt_local_apic *)entry;
-	if ((lapic->lapic_flags & ACPI_MADT_ENABLED) &&
-	    lapic->processor_id == acpi_id) {
-		*apic_id = lapic->id;
-		return 1;
-	}
-	return 0;
+
+	if (!(lapic->lapic_flags & ACPI_MADT_ENABLED))
+		return 0;
+
+	if (lapic->processor_id != acpi_id)
+		return 0;
+
+	*apic_id = lapic->id;
+	return 1;
 }
 
 static int map_x2apic_id(struct acpi_subtable_header *entry,
@@ -385,22 +64,16 @@
 {
 	struct acpi_madt_local_x2apic *apic =
 		(struct acpi_madt_local_x2apic *)entry;
-	u32 tmp = apic->local_apic_id;
 
-	/* Only check enabled APICs*/
 	if (!(apic->lapic_flags & ACPI_MADT_ENABLED))
 		return 0;
 
-	/* Device statement declaration type */
-	if (device_declaration) {
-		if (apic->uid == acpi_id)
-			goto found;
+	if (device_declaration && (apic->uid == acpi_id)) {
+		*apic_id = apic->local_apic_id;
+		return 1;
 	}
 
 	return 0;
-found:
-	*apic_id = tmp;
-	return 1;
 }
 
 static int map_lsapic_id(struct acpi_subtable_header *entry,
@@ -408,35 +81,34 @@
 {
 	struct acpi_madt_local_sapic *lsapic =
 		(struct acpi_madt_local_sapic *)entry;
-	u32 tmp = (lsapic->id << 8) | lsapic->eid;
 
-	/* Only check enabled APICs*/
 	if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))
 		return 0;
 
-	/* Device statement declaration type */
 	if (device_declaration) {
-		if (entry->length < 16)
-			printk(KERN_ERR PREFIX
-			    "Invalid LSAPIC with Device type processor (SAPIC ID %#x)\n",
-			    tmp);
-		else if (lsapic->uid == acpi_id)
-			goto found;
-	/* Processor statement declaration type */
-	} else if (lsapic->processor_id == acpi_id)
-		goto found;
+		if ((entry->length < 16) || (lsapic->uid != acpi_id))
+			return 0;
+	} else if (lsapic->processor_id != acpi_id)
+		return 0;
 
-	return 0;
-found:
-	*apic_id = tmp;
+	*apic_id = (lsapic->id << 8) | lsapic->eid;
 	return 1;
 }
 
 static int map_madt_entry(int type, u32 acpi_id)
 {
 	unsigned long madt_end, entry;
+	static struct acpi_table_madt *madt;
+	static int read_madt;
 	int apic_id = -1;
 
+	if (!read_madt) {
+		if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0,
+					(struct acpi_table_header **)&madt)))
+			madt = NULL;
+		read_madt++;
+	}
+
 	if (!madt)
 		return apic_id;
 
@@ -496,7 +168,7 @@
 	return apic_id;
 }
 
-static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id)
+int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id)
 {
 	int i;
 	int apic_id = -1;
@@ -513,630 +185,170 @@
 	}
 	return -1;
 }
+EXPORT_SYMBOL_GPL(acpi_get_cpuid);
 #endif
 
-/* --------------------------------------------------------------------------
-                                 Driver Interface
-   -------------------------------------------------------------------------- */
-
-static int acpi_processor_get_info(struct acpi_device *device)
+static bool processor_physically_present(acpi_handle handle)
 {
-	acpi_status status = 0;
+	int cpuid, type;
+	u32 acpi_id;
+	acpi_status status;
+	acpi_object_type acpi_type;
+	unsigned long long tmp;
 	union acpi_object object = { 0 };
 	struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
-	struct acpi_processor *pr;
-	int cpu_index, device_declaration = 0;
-	static int cpu0_initialized;
 
-	pr = acpi_driver_data(device);
-	if (!pr)
-		return -EINVAL;
-
-	if (num_online_cpus() > 1)
-		errata.smp = TRUE;
-
-	acpi_processor_errata(pr);
-
-	/*
-	 * Check to see if we have bus mastering arbitration control.  This
-	 * is required for proper C3 usage (to maintain cache coherency).
-	 */
-	if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) {
-		pr->flags.bm_control = 1;
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Bus mastering arbitration control present\n"));
-	} else
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "No bus mastering arbitration control\n"));
-
-	if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
-		/* Declared with "Processor" statement; match ProcessorID */
-		status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
-		if (ACPI_FAILURE(status)) {
-			printk(KERN_ERR PREFIX "Evaluating processor object\n");
-			return -ENODEV;
-		}
-
-		/*
-		 * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
-		 *      >>> 'acpi_get_processor_id(acpi_id, &id)' in
-		 *      arch/xxx/acpi.c
-		 */
-		pr->acpi_id = object.processor.proc_id;
-	} else {
-		/*
-		 * Declared with "Device" statement; match _UID.
-		 * Note that we don't handle string _UIDs yet.
-		 */
-		unsigned long long value;
-		status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
-						NULL, &value);
-		if (ACPI_FAILURE(status)) {
-			printk(KERN_ERR PREFIX
-			    "Evaluating processor _UID [%#x]\n", status);
-			return -ENODEV;
-		}
-		device_declaration = 1;
-		pr->acpi_id = value;
-	}
-	cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id);
-
-	/* Handle UP system running SMP kernel, with no LAPIC in MADT */
-	if (!cpu0_initialized && (cpu_index == -1) &&
-	    (num_online_cpus() == 1)) {
-		cpu_index = 0;
-	}
-
-	cpu0_initialized = 1;
-
-	pr->id = cpu_index;
-
-	/*
-	 *  Extra Processor objects may be enumerated on MP systems with
-	 *  less than the max # of CPUs. They should be ignored _iff
-	 *  they are physically not present.
-	 */
-	if (pr->id == -1) {
-		if (ACPI_FAILURE
-		    (acpi_processor_hotadd_init(pr->handle, &pr->id))) {
-			return -ENODEV;
-		}
-	}
-	/*
-	 * On some boxes several processors use the same processor bus id.
-	 * But they are located in different scope. For example:
-	 * \_SB.SCK0.CPU0
-	 * \_SB.SCK1.CPU0
-	 * Rename the processor device bus id. And the new bus id will be
-	 * generated as the following format:
-	 * CPU+CPU ID.
-	 */
-	sprintf(acpi_device_bid(device), "CPU%X", pr->id);
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
-			  pr->acpi_id));
-
-	if (!object.processor.pblk_address)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
-	else if (object.processor.pblk_length != 6)
-		printk(KERN_ERR PREFIX "Invalid PBLK length [%d]\n",
-			    object.processor.pblk_length);
-	else {
-		pr->throttling.address = object.processor.pblk_address;
-		pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset;
-		pr->throttling.duty_width = acpi_gbl_FADT.duty_width;
-
-		pr->pblk = object.processor.pblk_address;
-
-		/*
-		 * We don't care about error returns - we just try to mark
-		 * these reserved so that nobody else is confused into thinking
-		 * that this region might be unused..
-		 *
-		 * (In particular, allocating the IO range for Cardbus)
-		 */
-		request_region(pr->throttling.address, 6, "ACPI CPU throttle");
-	}
-
-	/*
-	 * If ACPI describes a slot number for this CPU, we can use it
-	 * ensure we get the right value in the "physical id" field
-	 * of /proc/cpuinfo
-	 */
-	status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer);
-	if (ACPI_SUCCESS(status))
-		arch_fix_phys_package_id(pr->id, object.integer.value);
-
-	return 0;
-}
-
-static DEFINE_PER_CPU(void *, processor_device_array);
-
-static void acpi_processor_notify(struct acpi_device *device, u32 event)
-{
-	struct acpi_processor *pr = acpi_driver_data(device);
-	int saved;
-
-	if (!pr)
-		return;
-
-	switch (event) {
-	case ACPI_PROCESSOR_NOTIFY_PERFORMANCE:
-		saved = pr->performance_platform_limit;
-		acpi_processor_ppc_has_changed(pr, 1);
-		if (saved == pr->performance_platform_limit)
-			break;
-		acpi_bus_generate_proc_event(device, event,
-					pr->performance_platform_limit);
-		acpi_bus_generate_netlink_event(device->pnp.device_class,
-						  dev_name(&device->dev), event,
-						  pr->performance_platform_limit);
-		break;
-	case ACPI_PROCESSOR_NOTIFY_POWER:
-		acpi_processor_cst_has_changed(pr);
-		acpi_bus_generate_proc_event(device, event, 0);
-		acpi_bus_generate_netlink_event(device->pnp.device_class,
-						  dev_name(&device->dev), event, 0);
-		break;
-	case ACPI_PROCESSOR_NOTIFY_THROTTLING:
-		acpi_processor_tstate_has_changed(pr);
-		acpi_bus_generate_proc_event(device, event, 0);
-		acpi_bus_generate_netlink_event(device->pnp.device_class,
-						  dev_name(&device->dev), event, 0);
-	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
-		break;
-	}
-
-	return;
-}
-
-static int acpi_cpu_soft_notify(struct notifier_block *nfb,
-		unsigned long action, void *hcpu)
-{
-	unsigned int cpu = (unsigned long)hcpu;
-	struct acpi_processor *pr = per_cpu(processors, cpu);
-
-	if (action == CPU_ONLINE && pr) {
-		acpi_processor_ppc_has_changed(pr, 0);
-		acpi_processor_cst_has_changed(pr);
-		acpi_processor_tstate_has_changed(pr);
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block acpi_cpu_notifier =
-{
-	    .notifier_call = acpi_cpu_soft_notify,
-};
-
-static int __cpuinit acpi_processor_add(struct acpi_device *device)
-{
-	struct acpi_processor *pr = NULL;
-	int result = 0;
-	struct sys_device *sysdev;
-
-	pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
-	if (!pr)
-		return -ENOMEM;
-
-	if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
-		kfree(pr);
-		return -ENOMEM;
-	}
-
-	pr->handle = device->handle;
-	strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
-	strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
-	device->driver_data = pr;
-
-	result = acpi_processor_get_info(device);
-	if (result) {
-		/* Processor is physically not present */
-		return 0;
-	}
-
-	BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
-
-	/*
-	 * Buggy BIOS check
-	 * ACPI id of processors can be reported wrongly by the BIOS.
-	 * Don't trust it blindly
-	 */
-	if (per_cpu(processor_device_array, pr->id) != NULL &&
-	    per_cpu(processor_device_array, pr->id) != device) {
-		printk(KERN_WARNING "BIOS reported wrong ACPI id "
-			"for the processor\n");
-		result = -ENODEV;
-		goto err_free_cpumask;
-	}
-	per_cpu(processor_device_array, pr->id) = device;
-
-	per_cpu(processors, pr->id) = pr;
-
-	result = acpi_processor_add_fs(device);
-	if (result)
-		goto err_free_cpumask;
-
-	sysdev = get_cpu_sysdev(pr->id);
-	if (sysfs_create_link(&device->dev.kobj, &sysdev->kobj, "sysdev")) {
-		result = -EFAULT;
-		goto err_remove_fs;
-	}
-
-	/* _PDC call should be done before doing anything else (if reqd.). */
-	acpi_processor_set_pdc(pr->handle);
-
-#ifdef CONFIG_CPU_FREQ
-	acpi_processor_ppc_has_changed(pr, 0);
-#endif
-	acpi_processor_get_throttling_info(pr);
-	acpi_processor_get_limit_info(pr);
-
-
-	acpi_processor_power_init(pr, device);
-
-	pr->cdev = thermal_cooling_device_register("Processor", device,
-						&processor_cooling_ops);
-	if (IS_ERR(pr->cdev)) {
-		result = PTR_ERR(pr->cdev);
-		goto err_power_exit;
-	}
-
-	dev_dbg(&device->dev, "registered as cooling_device%d\n",
-		 pr->cdev->id);
-
-	result = sysfs_create_link(&device->dev.kobj,
-				   &pr->cdev->device.kobj,
-				   "thermal_cooling");
-	if (result) {
-		printk(KERN_ERR PREFIX "Create sysfs link\n");
-		goto err_thermal_unregister;
-	}
-	result = sysfs_create_link(&pr->cdev->device.kobj,
-				   &device->dev.kobj,
-				   "device");
-	if (result) {
-		printk(KERN_ERR PREFIX "Create sysfs link\n");
-		goto err_remove_sysfs;
-	}
-
-	return 0;
-
-err_remove_sysfs:
-	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
-err_thermal_unregister:
-	thermal_cooling_device_unregister(pr->cdev);
-err_power_exit:
-	acpi_processor_power_exit(pr, device);
-err_remove_fs:
-	acpi_processor_remove_fs(device);
-err_free_cpumask:
-	free_cpumask_var(pr->throttling.shared_cpu_map);
-
-	return result;
-}
-
-static int acpi_processor_remove(struct acpi_device *device, int type)
-{
-	struct acpi_processor *pr = NULL;
-
-
-	if (!device || !acpi_driver_data(device))
-		return -EINVAL;
-
-	pr = acpi_driver_data(device);
-
-	if (pr->id >= nr_cpu_ids)
-		goto free;
-
-	if (type == ACPI_BUS_REMOVAL_EJECT) {
-		if (acpi_processor_handle_eject(pr))
-			return -EINVAL;
-	}
-
-	acpi_processor_power_exit(pr, device);
-
-	sysfs_remove_link(&device->dev.kobj, "sysdev");
-
-	acpi_processor_remove_fs(device);
-
-	if (pr->cdev) {
-		sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
-		sysfs_remove_link(&pr->cdev->device.kobj, "device");
-		thermal_cooling_device_unregister(pr->cdev);
-		pr->cdev = NULL;
-	}
-
-	per_cpu(processors, pr->id) = NULL;
-	per_cpu(processor_device_array, pr->id) = NULL;
-
-free:
-	free_cpumask_var(pr->throttling.shared_cpu_map);
-	kfree(pr);
-
-	return 0;
-}
-
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-/****************************************************************************
- * 	Acpi processor hotplug support 				       	    *
- ****************************************************************************/
-
-static int is_processor_present(acpi_handle handle)
-{
-	acpi_status status;
-	unsigned long long sta = 0;
-
-
-	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
-
-	if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT))
-		return 1;
-
-	/*
-	 * _STA is mandatory for a processor that supports hot plug
-	 */
-	if (status == AE_NOT_FOUND)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				"Processor does not support hot plug\n"));
-	else
-		ACPI_EXCEPTION((AE_INFO, status,
-				"Processor Device is not present"));
-	return 0;
-}
-
-static
-int acpi_processor_device_add(acpi_handle handle, struct acpi_device **device)
-{
-	acpi_handle phandle;
-	struct acpi_device *pdev;
-
-
-	if (acpi_get_parent(handle, &phandle)) {
-		return -ENODEV;
-	}
-
-	if (acpi_bus_get_device(phandle, &pdev)) {
-		return -ENODEV;
-	}
-
-	if (acpi_bus_add(device, pdev, handle, ACPI_BUS_TYPE_PROCESSOR)) {
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static void __ref acpi_processor_hotplug_notify(acpi_handle handle,
-						u32 event, void *data)
-{
-	struct acpi_processor *pr;
-	struct acpi_device *device = NULL;
-	int result;
-
-
-	switch (event) {
-	case ACPI_NOTIFY_BUS_CHECK:
-	case ACPI_NOTIFY_DEVICE_CHECK:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-		"Processor driver received %s event\n",
-		       (event == ACPI_NOTIFY_BUS_CHECK) ?
-		       "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK"));
-
-		if (!is_processor_present(handle))
-			break;
-
-		if (acpi_bus_get_device(handle, &device)) {
-			result = acpi_processor_device_add(handle, &device);
-			if (result)
-				printk(KERN_ERR PREFIX
-					    "Unable to add the device\n");
-			break;
-		}
-		break;
-	case ACPI_NOTIFY_EJECT_REQUEST:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "received ACPI_NOTIFY_EJECT_REQUEST\n"));
-
-		if (acpi_bus_get_device(handle, &device)) {
-			printk(KERN_ERR PREFIX
-				    "Device don't exist, dropping EJECT\n");
-			break;
-		}
-		pr = acpi_driver_data(device);
-		if (!pr) {
-			printk(KERN_ERR PREFIX
-				    "Driver data is NULL, dropping EJECT\n");
-			return;
-		}
-		break;
-	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
-		break;
-	}
-
-	return;
-}
-
-static acpi_status
-processor_walk_namespace_cb(acpi_handle handle,
-			    u32 lvl, void *context, void **rv)
-{
-	acpi_status status;
-	int *action = context;
-	acpi_object_type type = 0;
-
-	status = acpi_get_type(handle, &type);
+	status = acpi_get_type(handle, &acpi_type);
 	if (ACPI_FAILURE(status))
-		return (AE_OK);
+		return false;
 
-	if (type != ACPI_TYPE_PROCESSOR)
-		return (AE_OK);
-
-	switch (*action) {
-	case INSTALL_NOTIFY_HANDLER:
-		acpi_install_notify_handler(handle,
-					    ACPI_SYSTEM_NOTIFY,
-					    acpi_processor_hotplug_notify,
-					    NULL);
+	switch (acpi_type) {
+	case ACPI_TYPE_PROCESSOR:
+		status = acpi_evaluate_object(handle, NULL, NULL, &buffer);
+		if (ACPI_FAILURE(status))
+			return false;
+		acpi_id = object.processor.proc_id;
 		break;
-	case UNINSTALL_NOTIFY_HANDLER:
-		acpi_remove_notify_handler(handle,
-					   ACPI_SYSTEM_NOTIFY,
-					   acpi_processor_hotplug_notify);
+	case ACPI_TYPE_DEVICE:
+		status = acpi_evaluate_integer(handle, "_UID", NULL, &tmp);
+		if (ACPI_FAILURE(status))
+			return false;
+		acpi_id = tmp;
 		break;
 	default:
-		break;
+		return false;
 	}
 
-	return (AE_OK);
+	type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0;
+	cpuid = acpi_get_cpuid(handle, type, acpi_id);
+
+	if (cpuid == -1)
+		return false;
+
+	return true;
 }
 
-static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu)
+static void acpi_set_pdc_bits(u32 *buf)
 {
+	buf[0] = ACPI_PDC_REVISION_ID;
+	buf[1] = 1;
 
-	if (!is_processor_present(handle)) {
-		return AE_ERROR;
+	/* Enable coordination with firmware's _TSD info */
+	buf[2] = ACPI_PDC_SMP_T_SWCOORD;
+
+	/* Twiddle arch-specific bits needed for _PDC */
+	arch_acpi_set_pdc_bits(buf);
+}
+
+static struct acpi_object_list *acpi_processor_alloc_pdc(void)
+{
+	struct acpi_object_list *obj_list;
+	union acpi_object *obj;
+	u32 *buf;
+
+	/* allocate and initialize pdc. It will be used later. */
+	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
+	if (!obj_list) {
+		printk(KERN_ERR "Memory allocation error\n");
+		return NULL;
 	}
 
-	if (acpi_map_lsapic(handle, p_cpu))
-		return AE_ERROR;
-
-	if (arch_register_cpu(*p_cpu)) {
-		acpi_unmap_lsapic(*p_cpu);
-		return AE_ERROR;
+	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+	if (!obj) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj_list);
+		return NULL;
 	}
 
-	return AE_OK;
-}
+	buf = kmalloc(12, GFP_KERNEL);
+	if (!buf) {
+		printk(KERN_ERR "Memory allocation error\n");
+		kfree(obj);
+		kfree(obj_list);
+		return NULL;
+	}
 
-static int acpi_processor_handle_eject(struct acpi_processor *pr)
-{
-	if (cpu_online(pr->id))
-		cpu_down(pr->id);
+	acpi_set_pdc_bits(buf);
 
-	arch_unregister_cpu(pr->id);
-	acpi_unmap_lsapic(pr->id);
-	return (0);
-}
-#else
-static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu)
-{
-	return AE_ERROR;
-}
-static int acpi_processor_handle_eject(struct acpi_processor *pr)
-{
-	return (-EINVAL);
-}
-#endif
+	obj->type = ACPI_TYPE_BUFFER;
+	obj->buffer.length = 12;
+	obj->buffer.pointer = (u8 *) buf;
+	obj_list->count = 1;
+	obj_list->pointer = obj;
 
-static
-void acpi_processor_install_hotplug_notify(void)
-{
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-	int action = INSTALL_NOTIFY_HANDLER;
-	acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
-			    ACPI_ROOT_OBJECT,
-			    ACPI_UINT32_MAX,
-			    processor_walk_namespace_cb, NULL, &action, NULL);
-#endif
-	register_hotcpu_notifier(&acpi_cpu_notifier);
-}
-
-static
-void acpi_processor_uninstall_hotplug_notify(void)
-{
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-	int action = UNINSTALL_NOTIFY_HANDLER;
-	acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
-			    ACPI_ROOT_OBJECT,
-			    ACPI_UINT32_MAX,
-			    processor_walk_namespace_cb, NULL, &action, NULL);
-#endif
-	unregister_hotcpu_notifier(&acpi_cpu_notifier);
+	return obj_list;
 }
 
 /*
- * We keep the driver loaded even when ACPI is not running.
- * This is needed for the powernow-k8 driver, that works even without
- * ACPI, but needs symbols from this driver
+ * _PDC is required for a BIOS-OS handshake for most of the newer
+ * ACPI processor features.
  */
-
-static int __init acpi_processor_init(void)
+static int
+acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in)
 {
-	int result = 0;
+	acpi_status status = AE_OK;
 
-	if (acpi_disabled)
-		return 0;
+	if (idle_nomwait) {
+		/*
+		 * If mwait is disabled for CPU C-states, the C2C3_FFH access
+		 * mode will be disabled in the parameter of _PDC object.
+		 * Of course C1_FFH access mode will also be disabled.
+		 */
+		union acpi_object *obj;
+		u32 *buffer = NULL;
 
-	memset(&errata, 0, sizeof(errata));
+		obj = pdc_in->pointer;
+		buffer = (u32 *)(obj->buffer.pointer);
+		buffer[2] &= ~(ACPI_PDC_C_C2C3_FFH | ACPI_PDC_C_C1_FFH);
 
-#ifdef CONFIG_SMP
-	if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0,
-				(struct acpi_table_header **)&madt)))
-		madt = NULL;
-#endif
-#ifdef CONFIG_ACPI_PROCFS
-	acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir);
-	if (!acpi_processor_dir)
-		return -ENOMEM;
-#endif
-	result = cpuidle_register_driver(&acpi_idle_driver);
-	if (result < 0)
-		goto out_proc;
+	}
+	status = acpi_evaluate_object(handle, "_PDC", pdc_in, NULL);
 
-	result = acpi_bus_register_driver(&acpi_processor_driver);
-	if (result < 0)
-		goto out_cpuidle;
+	if (ACPI_FAILURE(status))
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+		    "Could not evaluate _PDC, using legacy perf. control.\n"));
 
-	acpi_processor_install_hotplug_notify();
-
-	acpi_thermal_cpufreq_init();
-
-	acpi_processor_ppc_init();
-
-	acpi_processor_throttling_init();
-
-	return 0;
-
-out_cpuidle:
-	cpuidle_unregister_driver(&acpi_idle_driver);
-
-out_proc:
-#ifdef CONFIG_ACPI_PROCFS
-	remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
-#endif
-
-	return result;
+	return status;
 }
 
-static void __exit acpi_processor_exit(void)
+void acpi_processor_set_pdc(acpi_handle handle)
 {
-	if (acpi_disabled)
+	struct acpi_object_list *obj_list;
+
+	if (arch_has_acpi_pdc() == false)
 		return;
 
-	acpi_processor_ppc_exit();
+	obj_list = acpi_processor_alloc_pdc();
+	if (!obj_list)
+		return;
 
-	acpi_thermal_cpufreq_exit();
+	acpi_processor_eval_pdc(handle, obj_list);
 
-	acpi_processor_uninstall_hotplug_notify();
+	kfree(obj_list->pointer->buffer.pointer);
+	kfree(obj_list->pointer);
+	kfree(obj_list);
+}
+EXPORT_SYMBOL_GPL(acpi_processor_set_pdc);
 
-	acpi_bus_unregister_driver(&acpi_processor_driver);
+static acpi_status
+early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	if (processor_physically_present(handle) == false)
+		return AE_OK;
 
-	cpuidle_unregister_driver(&acpi_idle_driver);
-
-#ifdef CONFIG_ACPI_PROCFS
-	remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
-#endif
-
-	return;
+	acpi_processor_set_pdc(handle);
+	return AE_OK;
 }
 
-module_init(acpi_processor_init);
-module_exit(acpi_processor_exit);
+void __init acpi_early_processor_set_pdc(void)
+{
+	/*
+	 * Check whether the system is DMI table. If yes, OSPM
+	 * should not use mwait for CPU-states.
+	 */
+	dmi_check_system(processor_idle_dmi_table);
 
-EXPORT_SYMBOL(acpi_processor_set_thermal_limit);
-
-MODULE_ALIAS("processor");
+	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
+			    ACPI_UINT32_MAX,
+			    early_init_pdc, NULL, NULL, NULL);
+}
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
new file mode 100644
index 0000000..b5658cd
--- /dev/null
+++ b/drivers/acpi/processor_driver.c
@@ -0,0 +1,978 @@
+/*
+ * acpi_processor.c - ACPI Processor Driver ($Revision: 71 $)
+ *
+ *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2004       Dominik Brodowski <linux@brodo.de>
+ *  Copyright (C) 2004  Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+ *  			- Added processor hotplug support
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or (at
+ *  your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *  TBD:
+ *	1. Make # power states dynamic.
+ *	2. Support duty_cycle values that span bit 4.
+ *	3. Optimize by having scheduler determine business instead of
+ *	   having us try to calculate it here.
+ *	4. Need C1 timing -- must modify kernel (IRQ handler) to get this.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/dmi.h>
+#include <linux/moduleparam.h>
+#include <linux/cpuidle.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/cpu.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/smp.h>
+#include <asm/acpi.h>
+
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+#include <acpi/processor.h>
+
+#define PREFIX "ACPI: "
+
+#define ACPI_PROCESSOR_CLASS		"processor"
+#define ACPI_PROCESSOR_DEVICE_NAME	"Processor"
+#define ACPI_PROCESSOR_FILE_INFO	"info"
+#define ACPI_PROCESSOR_FILE_THROTTLING	"throttling"
+#define ACPI_PROCESSOR_FILE_LIMIT	"limit"
+#define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80
+#define ACPI_PROCESSOR_NOTIFY_POWER	0x81
+#define ACPI_PROCESSOR_NOTIFY_THROTTLING	0x82
+
+#define ACPI_PROCESSOR_LIMIT_USER	0
+#define ACPI_PROCESSOR_LIMIT_THERMAL	1
+
+#define _COMPONENT		ACPI_PROCESSOR_COMPONENT
+ACPI_MODULE_NAME("processor_driver");
+
+MODULE_AUTHOR("Paul Diefenbaugh");
+MODULE_DESCRIPTION("ACPI Processor Driver");
+MODULE_LICENSE("GPL");
+
+static int acpi_processor_add(struct acpi_device *device);
+static int acpi_processor_remove(struct acpi_device *device, int type);
+#ifdef CONFIG_ACPI_PROCFS
+static int acpi_processor_info_open_fs(struct inode *inode, struct file *file);
+#endif
+static void acpi_processor_notify(struct acpi_device *device, u32 event);
+static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu);
+static int acpi_processor_handle_eject(struct acpi_processor *pr);
+
+
+static const struct acpi_device_id processor_device_ids[] = {
+	{ACPI_PROCESSOR_OBJECT_HID, 0},
+	{"ACPI0007", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, processor_device_ids);
+
+static struct acpi_driver acpi_processor_driver = {
+	.name = "processor",
+	.class = ACPI_PROCESSOR_CLASS,
+	.ids = processor_device_ids,
+	.ops = {
+		.add = acpi_processor_add,
+		.remove = acpi_processor_remove,
+		.suspend = acpi_processor_suspend,
+		.resume = acpi_processor_resume,
+		.notify = acpi_processor_notify,
+		},
+};
+
+#define INSTALL_NOTIFY_HANDLER		1
+#define UNINSTALL_NOTIFY_HANDLER	2
+#ifdef CONFIG_ACPI_PROCFS
+static const struct file_operations acpi_processor_info_fops = {
+	.owner = THIS_MODULE,
+	.open = acpi_processor_info_open_fs,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+#endif
+
+DEFINE_PER_CPU(struct acpi_processor *, processors);
+EXPORT_PER_CPU_SYMBOL(processors);
+
+struct acpi_processor_errata errata __read_mostly;
+
+/* --------------------------------------------------------------------------
+                                Errata Handling
+   -------------------------------------------------------------------------- */
+
+static int acpi_processor_errata_piix4(struct pci_dev *dev)
+{
+	u8 value1 = 0;
+	u8 value2 = 0;
+
+
+	if (!dev)
+		return -EINVAL;
+
+	/*
+	 * Note that 'dev' references the PIIX4 ACPI Controller.
+	 */
+
+	switch (dev->revision) {
+	case 0:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
+		break;
+	case 1:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n"));
+		break;
+	case 2:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n"));
+		break;
+	case 3:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n"));
+		break;
+	default:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n"));
+		break;
+	}
+
+	switch (dev->revision) {
+
+	case 0:		/* PIIX4 A-step */
+	case 1:		/* PIIX4 B-step */
+		/*
+		 * See specification changes #13 ("Manual Throttle Duty Cycle")
+		 * and #14 ("Enabling and Disabling Manual Throttle"), plus
+		 * erratum #5 ("STPCLK# Deassertion Time") from the January
+		 * 2002 PIIX4 specification update.  Applies to only older
+		 * PIIX4 models.
+		 */
+		errata.piix4.throttle = 1;
+
+	case 2:		/* PIIX4E */
+	case 3:		/* PIIX4M */
+		/*
+		 * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA
+		 * Livelock") from the January 2002 PIIX4 specification update.
+		 * Applies to all PIIX4 models.
+		 */
+
+		/*
+		 * BM-IDE
+		 * ------
+		 * Find the PIIX4 IDE Controller and get the Bus Master IDE
+		 * Status register address.  We'll use this later to read
+		 * each IDE controller's DMA status to make sure we catch all
+		 * DMA activity.
+		 */
+		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+				     PCI_DEVICE_ID_INTEL_82371AB,
+				     PCI_ANY_ID, PCI_ANY_ID, NULL);
+		if (dev) {
+			errata.piix4.bmisx = pci_resource_start(dev, 4);
+			pci_dev_put(dev);
+		}
+
+		/*
+		 * Type-F DMA
+		 * ----------
+		 * Find the PIIX4 ISA Controller and read the Motherboard
+		 * DMA controller's status to see if Type-F (Fast) DMA mode
+		 * is enabled (bit 7) on either channel.  Note that we'll
+		 * disable C3 support if this is enabled, as some legacy
+		 * devices won't operate well if fast DMA is disabled.
+		 */
+		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+				     PCI_DEVICE_ID_INTEL_82371AB_0,
+				     PCI_ANY_ID, PCI_ANY_ID, NULL);
+		if (dev) {
+			pci_read_config_byte(dev, 0x76, &value1);
+			pci_read_config_byte(dev, 0x77, &value2);
+			if ((value1 & 0x80) || (value2 & 0x80))
+				errata.piix4.fdma = 1;
+			pci_dev_put(dev);
+		}
+
+		break;
+	}
+
+	if (errata.piix4.bmisx)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Bus master activity detection (BM-IDE) erratum enabled\n"));
+	if (errata.piix4.fdma)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Type-F DMA livelock erratum (C3 disabled)\n"));
+
+	return 0;
+}
+
+static int acpi_processor_errata(struct acpi_processor *pr)
+{
+	int result = 0;
+	struct pci_dev *dev = NULL;
+
+
+	if (!pr)
+		return -EINVAL;
+
+	/*
+	 * PIIX4
+	 */
+	dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			     PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID,
+			     PCI_ANY_ID, NULL);
+	if (dev) {
+		result = acpi_processor_errata_piix4(dev);
+		pci_dev_put(dev);
+	}
+
+	return result;
+}
+
+/* --------------------------------------------------------------------------
+                              FS Interface (/proc)
+   -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI_PROCFS
+static struct proc_dir_entry *acpi_processor_dir = NULL;
+
+static int acpi_processor_info_seq_show(struct seq_file *seq, void *offset)
+{
+	struct acpi_processor *pr = seq->private;
+
+
+	if (!pr)
+		goto end;
+
+	seq_printf(seq, "processor id:            %d\n"
+		   "acpi id:                 %d\n"
+		   "bus mastering control:   %s\n"
+		   "power management:        %s\n"
+		   "throttling control:      %s\n"
+		   "limit interface:         %s\n",
+		   pr->id,
+		   pr->acpi_id,
+		   pr->flags.bm_control ? "yes" : "no",
+		   pr->flags.power ? "yes" : "no",
+		   pr->flags.throttling ? "yes" : "no",
+		   pr->flags.limit ? "yes" : "no");
+
+      end:
+	return 0;
+}
+
+static int acpi_processor_info_open_fs(struct inode *inode, struct file *file)
+{
+	return single_open(file, acpi_processor_info_seq_show,
+			   PDE(inode)->data);
+}
+
+static int __cpuinit acpi_processor_add_fs(struct acpi_device *device)
+{
+	struct proc_dir_entry *entry = NULL;
+
+
+	if (!acpi_device_dir(device)) {
+		acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
+						     acpi_processor_dir);
+		if (!acpi_device_dir(device))
+			return -ENODEV;
+	}
+
+	/* 'info' [R] */
+	entry = proc_create_data(ACPI_PROCESSOR_FILE_INFO,
+				 S_IRUGO, acpi_device_dir(device),
+				 &acpi_processor_info_fops,
+				 acpi_driver_data(device));
+	if (!entry)
+		return -EIO;
+
+	/* 'throttling' [R/W] */
+	entry = proc_create_data(ACPI_PROCESSOR_FILE_THROTTLING,
+				 S_IFREG | S_IRUGO | S_IWUSR,
+				 acpi_device_dir(device),
+				 &acpi_processor_throttling_fops,
+				 acpi_driver_data(device));
+	if (!entry)
+		return -EIO;
+
+	/* 'limit' [R/W] */
+	entry = proc_create_data(ACPI_PROCESSOR_FILE_LIMIT,
+				 S_IFREG | S_IRUGO | S_IWUSR,
+				 acpi_device_dir(device),
+				 &acpi_processor_limit_fops,
+				 acpi_driver_data(device));
+	if (!entry)
+		return -EIO;
+	return 0;
+}
+static int acpi_processor_remove_fs(struct acpi_device *device)
+{
+
+	if (acpi_device_dir(device)) {
+		remove_proc_entry(ACPI_PROCESSOR_FILE_INFO,
+				  acpi_device_dir(device));
+		remove_proc_entry(ACPI_PROCESSOR_FILE_THROTTLING,
+				  acpi_device_dir(device));
+		remove_proc_entry(ACPI_PROCESSOR_FILE_LIMIT,
+				  acpi_device_dir(device));
+		remove_proc_entry(acpi_device_bid(device), acpi_processor_dir);
+		acpi_device_dir(device) = NULL;
+	}
+
+	return 0;
+}
+#else
+static inline int acpi_processor_add_fs(struct acpi_device *device)
+{
+	return 0;
+}
+static inline int acpi_processor_remove_fs(struct acpi_device *device)
+{
+	return 0;
+}
+#endif
+
+/* --------------------------------------------------------------------------
+                                 Driver Interface
+   -------------------------------------------------------------------------- */
+
+static int acpi_processor_get_info(struct acpi_device *device)
+{
+	acpi_status status = 0;
+	union acpi_object object = { 0 };
+	struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
+	struct acpi_processor *pr;
+	int cpu_index, device_declaration = 0;
+	static int cpu0_initialized;
+
+	pr = acpi_driver_data(device);
+	if (!pr)
+		return -EINVAL;
+
+	if (num_online_cpus() > 1)
+		errata.smp = TRUE;
+
+	acpi_processor_errata(pr);
+
+	/*
+	 * Check to see if we have bus mastering arbitration control.  This
+	 * is required for proper C3 usage (to maintain cache coherency).
+	 */
+	if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) {
+		pr->flags.bm_control = 1;
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Bus mastering arbitration control present\n"));
+	} else
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "No bus mastering arbitration control\n"));
+
+	if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
+		/* Declared with "Processor" statement; match ProcessorID */
+		status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
+		if (ACPI_FAILURE(status)) {
+			printk(KERN_ERR PREFIX "Evaluating processor object\n");
+			return -ENODEV;
+		}
+
+		/*
+		 * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
+		 *      >>> 'acpi_get_processor_id(acpi_id, &id)' in
+		 *      arch/xxx/acpi.c
+		 */
+		pr->acpi_id = object.processor.proc_id;
+	} else {
+		/*
+		 * Declared with "Device" statement; match _UID.
+		 * Note that we don't handle string _UIDs yet.
+		 */
+		unsigned long long value;
+		status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
+						NULL, &value);
+		if (ACPI_FAILURE(status)) {
+			printk(KERN_ERR PREFIX
+			    "Evaluating processor _UID [%#x]\n", status);
+			return -ENODEV;
+		}
+		device_declaration = 1;
+		pr->acpi_id = value;
+	}
+	cpu_index = acpi_get_cpuid(pr->handle, device_declaration, pr->acpi_id);
+
+	/* Handle UP system running SMP kernel, with no LAPIC in MADT */
+	if (!cpu0_initialized && (cpu_index == -1) &&
+	    (num_online_cpus() == 1)) {
+		cpu_index = 0;
+	}
+
+	cpu0_initialized = 1;
+
+	pr->id = cpu_index;
+
+	/*
+	 *  Extra Processor objects may be enumerated on MP systems with
+	 *  less than the max # of CPUs. They should be ignored _iff
+	 *  they are physically not present.
+	 */
+	if (pr->id == -1) {
+		if (ACPI_FAILURE
+		    (acpi_processor_hotadd_init(pr->handle, &pr->id))) {
+			return -ENODEV;
+		}
+	}
+	/*
+	 * On some boxes several processors use the same processor bus id.
+	 * But they are located in different scope. For example:
+	 * \_SB.SCK0.CPU0
+	 * \_SB.SCK1.CPU0
+	 * Rename the processor device bus id. And the new bus id will be
+	 * generated as the following format:
+	 * CPU+CPU ID.
+	 */
+	sprintf(acpi_device_bid(device), "CPU%X", pr->id);
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
+			  pr->acpi_id));
+
+	if (!object.processor.pblk_address)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
+	else if (object.processor.pblk_length != 6)
+		printk(KERN_ERR PREFIX "Invalid PBLK length [%d]\n",
+			    object.processor.pblk_length);
+	else {
+		pr->throttling.address = object.processor.pblk_address;
+		pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset;
+		pr->throttling.duty_width = acpi_gbl_FADT.duty_width;
+
+		pr->pblk = object.processor.pblk_address;
+
+		/*
+		 * We don't care about error returns - we just try to mark
+		 * these reserved so that nobody else is confused into thinking
+		 * that this region might be unused..
+		 *
+		 * (In particular, allocating the IO range for Cardbus)
+		 */
+		request_region(pr->throttling.address, 6, "ACPI CPU throttle");
+	}
+
+	/*
+	 * If ACPI describes a slot number for this CPU, we can use it
+	 * ensure we get the right value in the "physical id" field
+	 * of /proc/cpuinfo
+	 */
+	status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer);
+	if (ACPI_SUCCESS(status))
+		arch_fix_phys_package_id(pr->id, object.integer.value);
+
+	return 0;
+}
+
+static DEFINE_PER_CPU(void *, processor_device_array);
+
+static void acpi_processor_notify(struct acpi_device *device, u32 event)
+{
+	struct acpi_processor *pr = acpi_driver_data(device);
+	int saved;
+
+	if (!pr)
+		return;
+
+	switch (event) {
+	case ACPI_PROCESSOR_NOTIFY_PERFORMANCE:
+		saved = pr->performance_platform_limit;
+		acpi_processor_ppc_has_changed(pr, 1);
+		if (saved == pr->performance_platform_limit)
+			break;
+		acpi_bus_generate_proc_event(device, event,
+					pr->performance_platform_limit);
+		acpi_bus_generate_netlink_event(device->pnp.device_class,
+						  dev_name(&device->dev), event,
+						  pr->performance_platform_limit);
+		break;
+	case ACPI_PROCESSOR_NOTIFY_POWER:
+		acpi_processor_cst_has_changed(pr);
+		acpi_bus_generate_proc_event(device, event, 0);
+		acpi_bus_generate_netlink_event(device->pnp.device_class,
+						  dev_name(&device->dev), event, 0);
+		break;
+	case ACPI_PROCESSOR_NOTIFY_THROTTLING:
+		acpi_processor_tstate_has_changed(pr);
+		acpi_bus_generate_proc_event(device, event, 0);
+		acpi_bus_generate_netlink_event(device->pnp.device_class,
+						  dev_name(&device->dev), event, 0);
+	default:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Unsupported event [0x%x]\n", event));
+		break;
+	}
+
+	return;
+}
+
+static int acpi_cpu_soft_notify(struct notifier_block *nfb,
+		unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+	struct acpi_processor *pr = per_cpu(processors, cpu);
+
+	if (action == CPU_ONLINE && pr) {
+		acpi_processor_ppc_has_changed(pr, 0);
+		acpi_processor_cst_has_changed(pr);
+		acpi_processor_tstate_has_changed(pr);
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block acpi_cpu_notifier =
+{
+	    .notifier_call = acpi_cpu_soft_notify,
+};
+
+static int __cpuinit acpi_processor_add(struct acpi_device *device)
+{
+	struct acpi_processor *pr = NULL;
+	int result = 0;
+	struct sys_device *sysdev;
+
+	pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
+	if (!pr)
+		return -ENOMEM;
+
+	if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
+		kfree(pr);
+		return -ENOMEM;
+	}
+
+	pr->handle = device->handle;
+	strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
+	device->driver_data = pr;
+
+	result = acpi_processor_get_info(device);
+	if (result) {
+		/* Processor is physically not present */
+		return 0;
+	}
+
+	BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
+
+	/*
+	 * Buggy BIOS check
+	 * ACPI id of processors can be reported wrongly by the BIOS.
+	 * Don't trust it blindly
+	 */
+	if (per_cpu(processor_device_array, pr->id) != NULL &&
+	    per_cpu(processor_device_array, pr->id) != device) {
+		printk(KERN_WARNING "BIOS reported wrong ACPI id "
+			"for the processor\n");
+		result = -ENODEV;
+		goto err_free_cpumask;
+	}
+	per_cpu(processor_device_array, pr->id) = device;
+
+	per_cpu(processors, pr->id) = pr;
+
+	result = acpi_processor_add_fs(device);
+	if (result)
+		goto err_free_cpumask;
+
+	sysdev = get_cpu_sysdev(pr->id);
+	if (sysfs_create_link(&device->dev.kobj, &sysdev->kobj, "sysdev")) {
+		result = -EFAULT;
+		goto err_remove_fs;
+	}
+
+#ifdef CONFIG_CPU_FREQ
+	acpi_processor_ppc_has_changed(pr, 0);
+#endif
+	acpi_processor_get_throttling_info(pr);
+	acpi_processor_get_limit_info(pr);
+
+
+	acpi_processor_power_init(pr, device);
+
+	pr->cdev = thermal_cooling_device_register("Processor", device,
+						&processor_cooling_ops);
+	if (IS_ERR(pr->cdev)) {
+		result = PTR_ERR(pr->cdev);
+		goto err_power_exit;
+	}
+
+	dev_dbg(&device->dev, "registered as cooling_device%d\n",
+		 pr->cdev->id);
+
+	result = sysfs_create_link(&device->dev.kobj,
+				   &pr->cdev->device.kobj,
+				   "thermal_cooling");
+	if (result) {
+		printk(KERN_ERR PREFIX "Create sysfs link\n");
+		goto err_thermal_unregister;
+	}
+	result = sysfs_create_link(&pr->cdev->device.kobj,
+				   &device->dev.kobj,
+				   "device");
+	if (result) {
+		printk(KERN_ERR PREFIX "Create sysfs link\n");
+		goto err_remove_sysfs;
+	}
+
+	return 0;
+
+err_remove_sysfs:
+	sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+err_thermal_unregister:
+	thermal_cooling_device_unregister(pr->cdev);
+err_power_exit:
+	acpi_processor_power_exit(pr, device);
+err_remove_fs:
+	acpi_processor_remove_fs(device);
+err_free_cpumask:
+	free_cpumask_var(pr->throttling.shared_cpu_map);
+
+	return result;
+}
+
+static int acpi_processor_remove(struct acpi_device *device, int type)
+{
+	struct acpi_processor *pr = NULL;
+
+
+	if (!device || !acpi_driver_data(device))
+		return -EINVAL;
+
+	pr = acpi_driver_data(device);
+
+	if (pr->id >= nr_cpu_ids)
+		goto free;
+
+	if (type == ACPI_BUS_REMOVAL_EJECT) {
+		if (acpi_processor_handle_eject(pr))
+			return -EINVAL;
+	}
+
+	acpi_processor_power_exit(pr, device);
+
+	sysfs_remove_link(&device->dev.kobj, "sysdev");
+
+	acpi_processor_remove_fs(device);
+
+	if (pr->cdev) {
+		sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+		sysfs_remove_link(&pr->cdev->device.kobj, "device");
+		thermal_cooling_device_unregister(pr->cdev);
+		pr->cdev = NULL;
+	}
+
+	per_cpu(processors, pr->id) = NULL;
+	per_cpu(processor_device_array, pr->id) = NULL;
+
+free:
+	free_cpumask_var(pr->throttling.shared_cpu_map);
+	kfree(pr);
+
+	return 0;
+}
+
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+/****************************************************************************
+ * 	Acpi processor hotplug support 				       	    *
+ ****************************************************************************/
+
+static int is_processor_present(acpi_handle handle)
+{
+	acpi_status status;
+	unsigned long long sta = 0;
+
+
+	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+
+	if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT))
+		return 1;
+
+	/*
+	 * _STA is mandatory for a processor that supports hot plug
+	 */
+	if (status == AE_NOT_FOUND)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				"Processor does not support hot plug\n"));
+	else
+		ACPI_EXCEPTION((AE_INFO, status,
+				"Processor Device is not present"));
+	return 0;
+}
+
+static
+int acpi_processor_device_add(acpi_handle handle, struct acpi_device **device)
+{
+	acpi_handle phandle;
+	struct acpi_device *pdev;
+
+
+	if (acpi_get_parent(handle, &phandle)) {
+		return -ENODEV;
+	}
+
+	if (acpi_bus_get_device(phandle, &pdev)) {
+		return -ENODEV;
+	}
+
+	if (acpi_bus_add(device, pdev, handle, ACPI_BUS_TYPE_PROCESSOR)) {
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __ref acpi_processor_hotplug_notify(acpi_handle handle,
+						u32 event, void *data)
+{
+	struct acpi_processor *pr;
+	struct acpi_device *device = NULL;
+	int result;
+
+
+	switch (event) {
+	case ACPI_NOTIFY_BUS_CHECK:
+	case ACPI_NOTIFY_DEVICE_CHECK:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+		"Processor driver received %s event\n",
+		       (event == ACPI_NOTIFY_BUS_CHECK) ?
+		       "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK"));
+
+		if (!is_processor_present(handle))
+			break;
+
+		if (acpi_bus_get_device(handle, &device)) {
+			result = acpi_processor_device_add(handle, &device);
+			if (result)
+				printk(KERN_ERR PREFIX
+					    "Unable to add the device\n");
+			break;
+		}
+		break;
+	case ACPI_NOTIFY_EJECT_REQUEST:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "received ACPI_NOTIFY_EJECT_REQUEST\n"));
+
+		if (acpi_bus_get_device(handle, &device)) {
+			printk(KERN_ERR PREFIX
+				    "Device don't exist, dropping EJECT\n");
+			break;
+		}
+		pr = acpi_driver_data(device);
+		if (!pr) {
+			printk(KERN_ERR PREFIX
+				    "Driver data is NULL, dropping EJECT\n");
+			return;
+		}
+		break;
+	default:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Unsupported event [0x%x]\n", event));
+		break;
+	}
+
+	return;
+}
+
+static acpi_status
+processor_walk_namespace_cb(acpi_handle handle,
+			    u32 lvl, void *context, void **rv)
+{
+	acpi_status status;
+	int *action = context;
+	acpi_object_type type = 0;
+
+	status = acpi_get_type(handle, &type);
+	if (ACPI_FAILURE(status))
+		return (AE_OK);
+
+	if (type != ACPI_TYPE_PROCESSOR)
+		return (AE_OK);
+
+	switch (*action) {
+	case INSTALL_NOTIFY_HANDLER:
+		acpi_install_notify_handler(handle,
+					    ACPI_SYSTEM_NOTIFY,
+					    acpi_processor_hotplug_notify,
+					    NULL);
+		break;
+	case UNINSTALL_NOTIFY_HANDLER:
+		acpi_remove_notify_handler(handle,
+					   ACPI_SYSTEM_NOTIFY,
+					   acpi_processor_hotplug_notify);
+		break;
+	default:
+		break;
+	}
+
+	return (AE_OK);
+}
+
+static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu)
+{
+
+	if (!is_processor_present(handle)) {
+		return AE_ERROR;
+	}
+
+	if (acpi_map_lsapic(handle, p_cpu))
+		return AE_ERROR;
+
+	if (arch_register_cpu(*p_cpu)) {
+		acpi_unmap_lsapic(*p_cpu);
+		return AE_ERROR;
+	}
+
+	return AE_OK;
+}
+
+static int acpi_processor_handle_eject(struct acpi_processor *pr)
+{
+	if (cpu_online(pr->id))
+		cpu_down(pr->id);
+
+	arch_unregister_cpu(pr->id);
+	acpi_unmap_lsapic(pr->id);
+	return (0);
+}
+#else
+static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu)
+{
+	return AE_ERROR;
+}
+static int acpi_processor_handle_eject(struct acpi_processor *pr)
+{
+	return (-EINVAL);
+}
+#endif
+
+static
+void acpi_processor_install_hotplug_notify(void)
+{
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+	int action = INSTALL_NOTIFY_HANDLER;
+	acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
+			    ACPI_ROOT_OBJECT,
+			    ACPI_UINT32_MAX,
+			    processor_walk_namespace_cb, NULL, &action, NULL);
+#endif
+	register_hotcpu_notifier(&acpi_cpu_notifier);
+}
+
+static
+void acpi_processor_uninstall_hotplug_notify(void)
+{
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+	int action = UNINSTALL_NOTIFY_HANDLER;
+	acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
+			    ACPI_ROOT_OBJECT,
+			    ACPI_UINT32_MAX,
+			    processor_walk_namespace_cb, NULL, &action, NULL);
+#endif
+	unregister_hotcpu_notifier(&acpi_cpu_notifier);
+}
+
+/*
+ * We keep the driver loaded even when ACPI is not running.
+ * This is needed for the powernow-k8 driver, that works even without
+ * ACPI, but needs symbols from this driver
+ */
+
+static int __init acpi_processor_init(void)
+{
+	int result = 0;
+
+	if (acpi_disabled)
+		return 0;
+
+	memset(&errata, 0, sizeof(errata));
+
+#ifdef CONFIG_ACPI_PROCFS
+	acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir);
+	if (!acpi_processor_dir)
+		return -ENOMEM;
+#endif
+	result = cpuidle_register_driver(&acpi_idle_driver);
+	if (result < 0)
+		goto out_proc;
+
+	result = acpi_bus_register_driver(&acpi_processor_driver);
+	if (result < 0)
+		goto out_cpuidle;
+
+	acpi_processor_install_hotplug_notify();
+
+	acpi_thermal_cpufreq_init();
+
+	acpi_processor_ppc_init();
+
+	acpi_processor_throttling_init();
+
+	return 0;
+
+out_cpuidle:
+	cpuidle_unregister_driver(&acpi_idle_driver);
+
+out_proc:
+#ifdef CONFIG_ACPI_PROCFS
+	remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
+#endif
+
+	return result;
+}
+
+static void __exit acpi_processor_exit(void)
+{
+	if (acpi_disabled)
+		return;
+
+	acpi_processor_ppc_exit();
+
+	acpi_thermal_cpufreq_exit();
+
+	acpi_processor_uninstall_hotplug_notify();
+
+	acpi_bus_unregister_driver(&acpi_processor_driver);
+
+	cpuidle_unregister_driver(&acpi_idle_driver);
+
+#ifdef CONFIG_ACPI_PROCFS
+	remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
+#endif
+
+	return;
+}
+
+module_init(acpi_processor_init);
+module_exit(acpi_processor_exit);
+
+EXPORT_SYMBOL(acpi_processor_set_thermal_limit);
+
+MODULE_ALIAS("processor");
diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c
deleted file mode 100644
index e306ba9..0000000
--- a/drivers/acpi/processor_pdc.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (C) 2005 Intel Corporation
- * Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
- *
- *	Alex Chiang <achiang@hp.com>
- *	- Unified x86/ia64 implementations
- *	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
- *	- Added _PDC for platforms with Intel CPUs
- */
-#include <linux/dmi.h>
-
-#include <acpi/acpi_drivers.h>
-#include <acpi/processor.h>
-
-#include "internal.h"
-
-#define PREFIX			"ACPI: "
-#define _COMPONENT		ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("processor_pdc");
-
-static int set_no_mwait(const struct dmi_system_id *id)
-{
-	printk(KERN_NOTICE PREFIX "%s detected - "
-		"disabling mwait for CPU C-states\n", id->ident);
-	idle_nomwait = 1;
-	return 0;
-}
-
-static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = {
-	{
-	set_no_mwait, "IFL91 board", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
-	DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"),
-	DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"),
-	DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL},
-	{
-	set_no_mwait, "Extensa 5220", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
-	DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-	DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
-	DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
-	{},
-};
-
-static void acpi_set_pdc_bits(u32 *buf)
-{
-	buf[0] = ACPI_PDC_REVISION_ID;
-	buf[1] = 1;
-
-	/* Enable coordination with firmware's _TSD info */
-	buf[2] = ACPI_PDC_SMP_T_SWCOORD;
-
-	/* Twiddle arch-specific bits needed for _PDC */
-	arch_acpi_set_pdc_bits(buf);
-}
-
-static struct acpi_object_list *acpi_processor_alloc_pdc(void)
-{
-	struct acpi_object_list *obj_list;
-	union acpi_object *obj;
-	u32 *buf;
-
-	/* allocate and initialize pdc. It will be used later. */
-	obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
-	if (!obj_list) {
-		printk(KERN_ERR "Memory allocation error\n");
-		return NULL;
-	}
-
-	obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
-	if (!obj) {
-		printk(KERN_ERR "Memory allocation error\n");
-		kfree(obj_list);
-		return NULL;
-	}
-
-	buf = kmalloc(12, GFP_KERNEL);
-	if (!buf) {
-		printk(KERN_ERR "Memory allocation error\n");
-		kfree(obj);
-		kfree(obj_list);
-		return NULL;
-	}
-
-	acpi_set_pdc_bits(buf);
-
-	obj->type = ACPI_TYPE_BUFFER;
-	obj->buffer.length = 12;
-	obj->buffer.pointer = (u8 *) buf;
-	obj_list->count = 1;
-	obj_list->pointer = obj;
-
-	return obj_list;
-}
-
-/*
- * _PDC is required for a BIOS-OS handshake for most of the newer
- * ACPI processor features.
- */
-static int
-acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in)
-{
-	acpi_status status = AE_OK;
-
-	if (idle_nomwait) {
-		/*
-		 * If mwait is disabled for CPU C-states, the C2C3_FFH access
-		 * mode will be disabled in the parameter of _PDC object.
-		 * Of course C1_FFH access mode will also be disabled.
-		 */
-		union acpi_object *obj;
-		u32 *buffer = NULL;
-
-		obj = pdc_in->pointer;
-		buffer = (u32 *)(obj->buffer.pointer);
-		buffer[2] &= ~(ACPI_PDC_C_C2C3_FFH | ACPI_PDC_C_C1_FFH);
-
-	}
-	status = acpi_evaluate_object(handle, "_PDC", pdc_in, NULL);
-
-	if (ACPI_FAILURE(status))
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-		    "Could not evaluate _PDC, using legacy perf. control.\n"));
-
-	return status;
-}
-
-static int early_pdc_done;
-
-void acpi_processor_set_pdc(acpi_handle handle)
-{
-	struct acpi_object_list *obj_list;
-
-	if (arch_has_acpi_pdc() == false)
-		return;
-
-	if (early_pdc_done)
-		return;
-
-	obj_list = acpi_processor_alloc_pdc();
-	if (!obj_list)
-		return;
-
-	acpi_processor_eval_pdc(handle, obj_list);
-
-	kfree(obj_list->pointer->buffer.pointer);
-	kfree(obj_list->pointer);
-	kfree(obj_list);
-}
-EXPORT_SYMBOL_GPL(acpi_processor_set_pdc);
-
-static int early_pdc_optin;
-static int set_early_pdc_optin(const struct dmi_system_id *id)
-{
-	early_pdc_optin = 1;
-	return 0;
-}
-
-static int param_early_pdc_optin(char *s)
-{
-	early_pdc_optin = 1;
-	return 1;
-}
-__setup("acpi_early_pdc_eval", param_early_pdc_optin);
-
-static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = {
-	{
-	set_early_pdc_optin, "HP Envy", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
-	DMI_MATCH(DMI_PRODUCT_NAME, "HP Envy") }, NULL},
-	{
-	set_early_pdc_optin, "HP Pavilion dv6", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
-	DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv6") }, NULL},
-	{
-	set_early_pdc_optin, "HP Pavilion dv7", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
-	DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7") }, NULL},
-	{},
-};
-
-static acpi_status
-early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv)
-{
-	acpi_processor_set_pdc(handle);
-	return AE_OK;
-}
-
-void __init acpi_early_processor_set_pdc(void)
-{
-	/*
-	 * Check whether the system is DMI table. If yes, OSPM
-	 * should not use mwait for CPU-states.
-	 */
-	dmi_check_system(processor_idle_dmi_table);
-
-	/*
-	 * Allow systems to opt-in to early _PDC evaluation.
-	 */
-	dmi_check_system(early_pdc_optin_table);
-	if (!early_pdc_optin)
-		return;
-
-	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
-			    ACPI_UINT32_MAX,
-			    early_init_pdc, NULL, NULL, NULL);
-
-	early_pdc_done = 1;
-}
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 7ded754..29c6f57 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -1133,9 +1133,6 @@
 	int result = 0;
 	struct acpi_processor_throttling *pthrottling;
 
-	if (!pr)
-		return -EINVAL;
-
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
 			  pr->throttling.address,
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index b16ddbf..89ad111 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -217,6 +217,9 @@
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
 		val->intval = acpi_battery_technology(battery);
 		break;
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+		val->intval = battery->cycle_count;
+		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 		val->intval = battery->design_voltage *
 			acpi_battery_vscale(battery) * 1000;
@@ -276,6 +279,7 @@
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
@@ -560,6 +564,7 @@
 		   battery->design_voltage * acpi_battery_vscale(battery));
 	seq_printf(seq, "design capacity warning: unknown\n");
 	seq_printf(seq, "design capacity low:     unknown\n");
+	seq_printf(seq, "cycle count:		  %i\n", battery->cycle_count);
 	seq_printf(seq, "capacity granularity 1:  unknown\n");
 	seq_printf(seq, "capacity granularity 2:  unknown\n");
 	seq_printf(seq, "model number:            %s\n", battery->device_name);
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 3bde594..f74834a 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -552,8 +552,17 @@
 	hibernate_nvs_restore();
 }
 
-static void acpi_pm_enable_gpes(void)
+static int acpi_pm_pre_restore(void)
 {
+	acpi_disable_all_gpes();
+	acpi_os_wait_events_complete(NULL);
+	acpi_ec_suspend_transactions();
+	return 0;
+}
+
+static void acpi_pm_restore_cleanup(void)
+{
+	acpi_ec_resume_transactions();
 	acpi_enable_all_runtime_gpes();
 }
 
@@ -565,8 +574,8 @@
 	.prepare = acpi_pm_prepare,
 	.enter = acpi_hibernation_enter,
 	.leave = acpi_hibernation_leave,
-	.pre_restore = acpi_pm_disable_gpes,
-	.restore_cleanup = acpi_pm_enable_gpes,
+	.pre_restore = acpi_pm_pre_restore,
+	.restore_cleanup = acpi_pm_restore_cleanup,
 };
 
 /**
@@ -618,8 +627,8 @@
 	.prepare = acpi_pm_disable_gpes,
 	.enter = acpi_hibernation_enter,
 	.leave = acpi_hibernation_leave,
-	.pre_restore = acpi_pm_disable_gpes,
-	.restore_cleanup = acpi_pm_enable_gpes,
+	.pre_restore = acpi_pm_pre_restore,
+	.restore_cleanup = acpi_pm_restore_cleanup,
 	.recover = acpi_pm_finish,
 };
 #endif /* CONFIG_HIBERNATION */
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index a206a12..743f244 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -101,6 +101,7 @@
 	struct acpi_table_header *header = NULL;
 	struct acpi_table_attr *attr = NULL;
 
+	sysfs_attr_init(&table_attr->attr.attr);
 	if (table_header->signature[0] != '\0')
 		memcpy(table_attr->name, table_header->signature,
 			ACPI_NAME_SIZE);
@@ -475,6 +476,7 @@
 			goto fail;
 		strncpy(name, buffer, strlen(buffer) + 1);
 
+		sysfs_attr_init(&counter_attrs[i].attr);
 		counter_attrs[i].attr.name = name;
 		counter_attrs[i].attr.mode = 0644;
 		counter_attrs[i].show = counter_show;
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 9073ada..5d38935 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -368,7 +368,7 @@
 	int valid = 0;
 	int i;
 
-	/* Critical Shutdown (required) */
+	/* Critical Shutdown */
 	if (flag & ACPI_TRIPS_CRITICAL) {
 		status = acpi_evaluate_integer(tz->device->handle,
 				"_CRT", NULL, &tmp);
@@ -379,17 +379,19 @@
 		 * Below zero (Celsius) values clearly aren't right for sure..
 		 * ... so lets discard those as invalid.
 		 */
-		if (ACPI_FAILURE(status) ||
-				tz->trips.critical.temperature <= 2732) {
+		if (ACPI_FAILURE(status)) {
 			tz->trips.critical.flags.valid = 0;
-			ACPI_EXCEPTION((AE_INFO, status,
-					"No or invalid critical threshold"));
-			return -ENODEV;
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+					  "No critical threshold\n"));
+		} else if (tmp <= 2732) {
+			printk(KERN_WARNING FW_BUG "Invalid critical threshold "
+			       "(%llu)\n", tmp);
+			tz->trips.critical.flags.valid = 0;
 		} else {
 			tz->trips.critical.flags.valid = 1;
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					"Found critical threshold [%lu]\n",
-					tz->trips.critical.temperature));
+					  "Found critical threshold [%lu]\n",
+					  tz->trips.critical.temperature));
 		}
 		if (tz->trips.critical.flags.valid == 1) {
 			if (crt == -1) {
@@ -575,7 +577,23 @@
 
 static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 {
-	return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
+	int i, valid, ret = acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
+
+	if (ret)
+		return ret;
+
+	valid = tz->trips.critical.flags.valid |
+		tz->trips.hot.flags.valid |
+		tz->trips.passive.flags.valid;
+
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
+		valid |= tz->trips.active[i].flags.valid;
+
+	if (!valid) {
+		printk(KERN_WARNING FW_BUG "No valid trip found\n");
+		return -ENODEV;
+	}
+	return 0;
 }
 
 static void acpi_thermal_check(void *data)
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index 11882db..c9a49f4 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -289,51 +289,6 @@
 
 EXPORT_SYMBOL(acpi_evaluate_integer);
 
-#if 0
-acpi_status
-acpi_evaluate_string(acpi_handle handle,
-		     acpi_string pathname,
-		     acpi_object_list * arguments, acpi_string * data)
-{
-	acpi_status status = AE_OK;
-	acpi_object *element = NULL;
-	acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
-
-	if (!data)
-		return AE_BAD_PARAMETER;
-
-	status = acpi_evaluate_object(handle, pathname, arguments, &buffer);
-	if (ACPI_FAILURE(status)) {
-		acpi_util_eval_error(handle, pathname, status);
-		return status;
-	}
-
-	element = (acpi_object *) buffer.pointer;
-
-	if ((element->type != ACPI_TYPE_STRING)
-	    || (element->type != ACPI_TYPE_BUFFER)
-	    || !element->string.length) {
-		acpi_util_eval_error(handle, pathname, AE_BAD_DATA);
-		return AE_BAD_DATA;
-	}
-
-	*data = kzalloc(element->string.length + 1, GFP_KERNEL);
-	if (!data) {
-		printk(KERN_ERR PREFIX "Memory allocation\n");
-		return -ENOMEM;
-	}
-
-	memcpy(*data, element->string.pointer, element->string.length);
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%s]\n", *data));
-
-	kfree(buffer.pointer);
-
-	return AE_OK;
-}
-#endif
-
 acpi_status
 acpi_evaluate_reference(acpi_handle handle,
 			acpi_string pathname,
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 6e9b491..2ff2b6ab 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -327,7 +327,7 @@
 			int level);
 static int acpi_video_device_lcd_get_level_current(
 			struct acpi_video_device *device,
-			unsigned long long *level);
+			unsigned long long *level, int init);
 static int acpi_video_get_next_level(struct acpi_video_device *device,
 				     u32 level_current, u32 event);
 static int acpi_video_switch_brightness(struct acpi_video_device *device,
@@ -345,7 +345,7 @@
 	struct acpi_video_device *vd =
 		(struct acpi_video_device *)bl_get_data(bd);
 
-	if (acpi_video_device_lcd_get_level_current(vd, &cur_level))
+	if (acpi_video_device_lcd_get_level_current(vd, &cur_level, 0))
 		return -EINVAL;
 	for (i = 2; i < vd->brightness->count; i++) {
 		if (vd->brightness->levels[i] == cur_level)
@@ -414,7 +414,7 @@
 	unsigned long long level;
 	int offset;
 
-	if (acpi_video_device_lcd_get_level_current(video, &level))
+	if (acpi_video_device_lcd_get_level_current(video, &level, 0))
 		return -EINVAL;
 	for (offset = 2; offset < video->brightness->count; offset++)
 		if (level == video->brightness->levels[offset]) {
@@ -609,7 +609,7 @@
 
 static int
 acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
-					unsigned long long *level)
+					unsigned long long *level, int init)
 {
 	acpi_status status = AE_OK;
 	int i;
@@ -633,10 +633,16 @@
 					device->brightness->curr = *level;
 					return 0;
 			}
-			/* BQC returned an invalid level. Stop using it.  */
-			ACPI_WARNING((AE_INFO, "%s returned an invalid level",
-						buf));
-			device->cap._BQC = device->cap._BCQ = 0;
+			if (!init) {
+				/*
+				 * BQC returned an invalid level.
+				 * Stop using it.
+				 */
+				ACPI_WARNING((AE_INFO,
+					      "%s returned an invalid level",
+					      buf));
+				device->cap._BQC = device->cap._BCQ = 0;
+			}
 		} else {
 			/* Fixme:
 			 * should we return an error or ignore this failure?
@@ -892,7 +898,7 @@
 	if (!device->cap._BQC)
 		goto set_level;
 
-	result = acpi_video_device_lcd_get_level_current(device, &level_old);
+	result = acpi_video_device_lcd_get_level_current(device, &level_old, 1);
 	if (result)
 		goto out_free_levels;
 
@@ -903,7 +909,7 @@
 	if (result)
 		goto out_free_levels;
 
-	result = acpi_video_device_lcd_get_level_current(device, &level);
+	result = acpi_video_device_lcd_get_level_current(device, &level, 0);
 	if (result)
 		goto out_free_levels;
 
@@ -1996,7 +2002,7 @@
 		goto out;
 
 	result = acpi_video_device_lcd_get_level_current(device,
-							 &level_current);
+							 &level_current, 0);
 	if (result)
 		goto out;
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9c77b0d..4a28420 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2232,7 +2232,7 @@
 		 * Some drives were very specific about that exact sequence.
 		 *
 		 * Note that ATA4 says lba is mandatory so the second check
-		 * shoud never trigger.
+		 * should never trigger.
 		 */
 		if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
 			err_mask = ata_dev_init_params(dev, id[3], id[6]);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 02441fd5..561dec2 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2287,7 +2287,7 @@
  *	@qc: command
  *
  *	Drain the FIFO and device of any stuck data following a command
- *	failing to complete. In some cases this is neccessary before a
+ *	failing to complete. In some cases this is necessary before a
  *	reset will recover the device.
  *
  */
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 294f302..8e5e132 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -161,7 +161,7 @@
  *
  *	Called when the libata layer is about to issue a command. We wrap
  *	this interface so that we can load the correct ATA timings if
- *	neccessary.
+ *	necessary.
  */
 
 static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index c86c716..727a81c 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -180,7 +180,7 @@
  *	@id: Entry in match table
  *
  *	Perform basic initialisation. We set the device up so we access all
- *	ports via BAR4. This is neccessary to work around errata.
+ *	ports via BAR4. This is necessary to work around errata.
  */
 
 static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 3610353..147de2f 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -131,7 +131,7 @@
  *	@qc: command
  *
  *	Drain the FIFO and device of any stuck data following a command
- *	failing to complete. In some cases this is neccessary before a
+ *	failing to complete. In some cases this is necessary before a
  *	reset will recover the device.
  *
  */
diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c
index fe3a865..b0ca5a47 100644
--- a/drivers/auxdisplay/cfag12864bfb.c
+++ b/drivers/auxdisplay/cfag12864bfb.c
@@ -81,7 +81,7 @@
 	.fb_mmap = cfag12864bfb_mmap,
 };
 
-static int __init cfag12864bfb_probe(struct platform_device *device)
+static int __devinit cfag12864bfb_probe(struct platform_device *device)
 {
 	int ret = -EINVAL;
  	struct fb_info *info = framebuffer_alloc(0, &device->dev);
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index ee37727..fd52c48 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -3,35 +3,50 @@
 config UEVENT_HELPER_PATH
 	string "path to uevent helper"
 	depends on HOTPLUG
-	default "/sbin/hotplug"
+	default ""
 	help
 	  Path to uevent helper program forked by the kernel for
 	  every uevent.
+	  Before the switch to the netlink-based uevent source, this was
+	  used to hook hotplug scripts into kernel device events. It
+	  usually pointed to a shell script at /sbin/hotplug.
+	  This should not be used today, because usual systems create
+	  many events at bootup or device discovery in a very short time
+	  frame. One forked process per event can create so many processes
+	  that it creates a high system load, or on smaller systems
+	  it is known to create out-of-memory situations during bootup.
 
 config DEVTMPFS
-	bool "Create a kernel maintained /dev tmpfs (EXPERIMENTAL)"
+	bool "Maintain a devtmpfs filesystem to mount at /dev"
 	depends on HOTPLUG && SHMEM && TMPFS
 	help
-	  This creates a tmpfs filesystem, and mounts it at bootup
-	  and mounts it at /dev. The kernel driver core creates device
-	  nodes for all registered devices in that filesystem. All device
-	  nodes are owned by root and have the default mode of 0600.
-	  Userspace can add and delete the nodes as needed. This is
-	  intended to simplify bootup, and make it possible to delay
-	  the initial coldplug at bootup done by udev in userspace.
-	  It should also provide a simpler way for rescue systems
-	  to bring up a kernel with dynamic major/minor numbers.
-	  Meaningful symlinks, permissions and device ownership must
-	  still be handled by userspace.
-	  If unsure, say N here.
+	  This creates a tmpfs filesystem instance early at bootup.
+	  In this filesystem, the kernel driver core maintains device
+	  nodes with their default names and permissions for all
+	  registered devices with an assigned major/minor number.
+	  Userspace can modify the filesystem content as needed, add
+	  symlinks, and apply needed permissions.
+	  It provides a fully functional /dev directory, where usually
+	  udev runs on top, managing permissions and adding meaningful
+	  symlinks.
+	  In very limited environments, it may provide a sufficient
+	  functional /dev without any further help. It also allows simple
+	  rescue systems, and reliably handles dynamic major/minor numbers.
 
 config DEVTMPFS_MOUNT
-	bool "Automount devtmpfs at /dev"
+	bool "Automount devtmpfs at /dev, after the kernel mounted the rootfs"
 	depends on DEVTMPFS
 	help
-	  This will mount devtmpfs at /dev if the kernel mounts the root
-	  filesystem. It will not affect initramfs based mounting.
-	  If unsure, say N here.
+	  This will instruct the kernel to automatically mount the
+	  devtmpfs filesystem at /dev, directly after the kernel has
+	  mounted the root filesystem. The behavior can be overridden
+	  with the commandline parameter: devtmpfs.mount=0|1.
+	  This option does not affect initramfs based booting, here
+	  the devtmpfs filesystem always needs to be mounted manually
+	  after the roots is mounted.
+	  With this option enabled, it allows to bring up a system in
+	  rescue mode with init=/bin/sh, even when the /dev directory
+	  on the rootfs is completely empty.
 
 config STANDALONE
 	bool "Select only drivers that don't need compile-time external firmware" if EXPERIMENTAL
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index c0c5a43..71f6af5 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -70,7 +70,7 @@
 	return ret;
 }
 
-static struct sysfs_ops driver_sysfs_ops = {
+static const struct sysfs_ops driver_sysfs_ops = {
 	.show	= drv_attr_show,
 	.store	= drv_attr_store,
 };
@@ -115,7 +115,7 @@
 	return ret;
 }
 
-static struct sysfs_ops bus_sysfs_ops = {
+static const struct sysfs_ops bus_sysfs_ops = {
 	.show	= bus_attr_show,
 	.store	= bus_attr_store,
 };
@@ -154,7 +154,7 @@
 	return 0;
 }
 
-static struct kset_uevent_ops bus_uevent_ops = {
+static const struct kset_uevent_ops bus_uevent_ops = {
 	.filter = bus_uevent_filter,
 };
 
@@ -173,10 +173,10 @@
 	dev = bus_find_device_by_name(bus, NULL, buf);
 	if (dev && dev->driver == drv) {
 		if (dev->parent)	/* Needed for USB */
-			down(&dev->parent->sem);
+			device_lock(dev->parent);
 		device_release_driver(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 		err = count;
 	}
 	put_device(dev);
@@ -200,12 +200,12 @@
 	dev = bus_find_device_by_name(bus, NULL, buf);
 	if (dev && dev->driver == NULL && driver_match_device(drv, dev)) {
 		if (dev->parent)	/* Needed for USB */
-			down(&dev->parent->sem);
-		down(&dev->sem);
+			device_lock(dev->parent);
+		device_lock(dev);
 		err = driver_probe_device(drv, dev);
-		up(&dev->sem);
+		device_unlock(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 
 		if (err > 0) {
 			/* success */
@@ -744,10 +744,10 @@
 
 	if (!dev->driver) {
 		if (dev->parent)	/* Needed for USB */
-			down(&dev->parent->sem);
+			device_lock(dev->parent);
 		ret = device_attach(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 	}
 	return ret < 0 ? ret : 0;
 }
@@ -779,10 +779,10 @@
 {
 	if (dev->driver) {
 		if (dev->parent)        /* Needed for USB */
-			down(&dev->parent->sem);
+			device_lock(dev->parent);
 		device_release_driver(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 	}
 	return bus_rescan_devices_helper(dev, NULL);
 }
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 6e2c3b0..0147f47 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -31,7 +31,7 @@
 	ssize_t ret = -EIO;
 
 	if (class_attr->show)
-		ret = class_attr->show(cp->class, buf);
+		ret = class_attr->show(cp->class, class_attr, buf);
 	return ret;
 }
 
@@ -43,7 +43,7 @@
 	ssize_t ret = -EIO;
 
 	if (class_attr->store)
-		ret = class_attr->store(cp->class, buf, count);
+		ret = class_attr->store(cp->class, class_attr, buf, count);
 	return ret;
 }
 
@@ -63,7 +63,7 @@
 	kfree(cp);
 }
 
-static struct sysfs_ops class_sysfs_ops = {
+static const struct sysfs_ops class_sysfs_ops = {
 	.show	= class_attr_show,
 	.store	= class_attr_store,
 };
@@ -490,6 +490,16 @@
 	class_put(parent);
 }
 
+ssize_t show_class_attr_string(struct class *class, struct class_attribute *attr,
+                        	char *buf)
+{
+	struct class_attribute_string *cs;
+	cs = container_of(attr, struct class_attribute_string, attr);
+	return snprintf(buf, PAGE_SIZE, "%s\n", cs->str);
+}
+
+EXPORT_SYMBOL_GPL(show_class_attr_string);
+
 struct class_compat {
 	struct kobject *kobj;
 };
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 2820257..ef55df3 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -100,7 +100,7 @@
 	return ret;
 }
 
-static struct sysfs_ops dev_sysfs_ops = {
+static const struct sysfs_ops dev_sysfs_ops = {
 	.show	= dev_attr_show,
 	.store	= dev_attr_store,
 };
@@ -252,7 +252,7 @@
 	return retval;
 }
 
-static struct kset_uevent_ops device_uevent_ops = {
+static const struct kset_uevent_ops device_uevent_ops = {
 	.filter =	dev_uevent_filter,
 	.name =		dev_uevent_name,
 	.uevent =	dev_uevent,
@@ -306,15 +306,10 @@
 {
 	enum kobject_action action;
 
-	if (kobject_action_type(buf, count, &action) == 0) {
+	if (kobject_action_type(buf, count, &action) == 0)
 		kobject_uevent(&dev->kobj, action);
-		goto out;
-	}
-
-	dev_err(dev, "uevent: unsupported action-string; this will "
-		     "be ignored in a future kernel version\n");
-	kobject_uevent(&dev->kobj, KOBJ_ADD);
-out:
+	else
+		dev_err(dev, "uevent: unknown action-string\n");
 	return count;
 }
 
@@ -607,6 +602,7 @@
 	int retval;
 
 	if (dev->class) {
+		static DEFINE_MUTEX(gdp_mutex);
 		struct kobject *kobj = NULL;
 		struct kobject *parent_kobj;
 		struct kobject *k;
@@ -623,6 +619,8 @@
 		else
 			parent_kobj = &parent->kobj;
 
+		mutex_lock(&gdp_mutex);
+
 		/* find our class-directory at the parent and reference it */
 		spin_lock(&dev->class->p->class_dirs.list_lock);
 		list_for_each_entry(k, &dev->class->p->class_dirs.list, entry)
@@ -631,20 +629,26 @@
 				break;
 			}
 		spin_unlock(&dev->class->p->class_dirs.list_lock);
-		if (kobj)
+		if (kobj) {
+			mutex_unlock(&gdp_mutex);
 			return kobj;
+		}
 
 		/* or create a new class-directory at the parent device */
 		k = kobject_create();
-		if (!k)
+		if (!k) {
+			mutex_unlock(&gdp_mutex);
 			return NULL;
+		}
 		k->kset = &dev->class->p->class_dirs;
 		retval = kobject_add(k, parent_kobj, "%s", dev->class->name);
 		if (retval < 0) {
+			mutex_unlock(&gdp_mutex);
 			kobject_put(k);
 			return NULL;
 		}
 		/* do not emit an uevent for this simple "glue" directory */
+		mutex_unlock(&gdp_mutex);
 		return k;
 	}
 
@@ -1574,22 +1578,16 @@
 	if (old_class_name) {
 		new_class_name = make_class_name(dev->class->name, &dev->kobj);
 		if (new_class_name) {
-			error = sysfs_create_link_nowarn(&dev->parent->kobj,
-							 &dev->kobj,
-							 new_class_name);
-			if (error)
-				goto out;
-			sysfs_remove_link(&dev->parent->kobj, old_class_name);
+			error = sysfs_rename_link(&dev->parent->kobj,
+						  &dev->kobj,
+						  old_class_name,
+						  new_class_name);
 		}
 	}
 #else
 	if (dev->class) {
-		error = sysfs_create_link_nowarn(&dev->class->p->class_subsys.kobj,
-						 &dev->kobj, dev_name(dev));
-		if (error)
-			goto out;
-		sysfs_remove_link(&dev->class->p->class_subsys.kobj,
-				  old_device_name);
+		error = sysfs_rename_link(&dev->class->p->class_subsys.kobj,
+					  &dev->kobj, old_device_name, new_name);
 	}
 #endif
 
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index 958bd15..7036e8e 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -13,8 +13,11 @@
 
 #include "base.h"
 
+static struct sysdev_class_attribute *cpu_sysdev_class_attrs[];
+
 struct sysdev_class cpu_sysdev_class = {
 	.name = "cpu",
+	.attrs = cpu_sysdev_class_attrs,
 };
 EXPORT_SYMBOL(cpu_sysdev_class);
 
@@ -76,34 +79,24 @@
 }
 
 #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
-static ssize_t cpu_probe_store(struct class *class, const char *buf,
+static ssize_t cpu_probe_store(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				const char *buf,
 			       size_t count)
 {
 	return arch_cpu_probe(buf, count);
 }
 
-static ssize_t cpu_release_store(struct class *class, const char *buf,
+static ssize_t cpu_release_store(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				const char *buf,
 				 size_t count)
 {
 	return arch_cpu_release(buf, count);
 }
 
-static CLASS_ATTR(probe, S_IWUSR, NULL, cpu_probe_store);
-static CLASS_ATTR(release, S_IWUSR, NULL, cpu_release_store);
-
-int __init cpu_probe_release_init(void)
-{
-	int rc;
-
-	rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
-			       &class_attr_probe.attr);
-	if (!rc)
-		rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
-				       &class_attr_release.attr);
-
-	return rc;
-}
-device_initcall(cpu_probe_release_init);
+static SYSDEV_ATTR(probe, S_IWUSR, NULL, cpu_probe_store);
+static SYSDEV_ATTR(release, S_IWUSR, NULL, cpu_release_store);
 #endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
 
 #else /* ... !CONFIG_HOTPLUG_CPU */
@@ -141,31 +134,39 @@
 /*
  * Print cpu online, possible, present, and system maps
  */
-static ssize_t print_cpus_map(char *buf, const struct cpumask *map)
+
+struct cpu_attr {
+	struct sysdev_class_attribute attr;
+	const struct cpumask *const * const map;
+};
+
+static ssize_t show_cpus_attr(struct sysdev_class *class,
+			      struct sysdev_class_attribute *attr,
+			      char *buf)
 {
-	int n = cpulist_scnprintf(buf, PAGE_SIZE-2, map);
+	struct cpu_attr *ca = container_of(attr, struct cpu_attr, attr);
+	int n = cpulist_scnprintf(buf, PAGE_SIZE-2, *(ca->map));
 
 	buf[n++] = '\n';
 	buf[n] = '\0';
 	return n;
 }
 
-#define	print_cpus_func(type) \
-static ssize_t print_cpus_##type(struct sysdev_class *class, char *buf)	\
-{									\
-	return print_cpus_map(buf, cpu_##type##_mask);			\
-}									\
-static struct sysdev_class_attribute attr_##type##_map = 		\
-	_SYSDEV_CLASS_ATTR(type, 0444, print_cpus_##type, NULL)
+#define _CPU_ATTR(name, map)						\
+	{ _SYSDEV_CLASS_ATTR(name, 0444, show_cpus_attr, NULL), map }
 
-print_cpus_func(online);
-print_cpus_func(possible);
-print_cpus_func(present);
+/* Keep in sync with cpu_sysdev_class_attrs */
+static struct cpu_attr cpu_attrs[] = {
+	_CPU_ATTR(online, &cpu_online_mask),
+	_CPU_ATTR(possible, &cpu_possible_mask),
+	_CPU_ATTR(present, &cpu_present_mask),
+};
 
 /*
  * Print values for NR_CPUS and offlined cpus
  */
-static ssize_t print_cpus_kernel_max(struct sysdev_class *class, char *buf)
+static ssize_t print_cpus_kernel_max(struct sysdev_class *class,
+				     struct sysdev_class_attribute *attr, char *buf)
 {
 	int n = snprintf(buf, PAGE_SIZE-2, "%d\n", NR_CPUS - 1);
 	return n;
@@ -175,7 +176,8 @@
 /* arch-optional setting to enable display of offline cpus >= nr_cpu_ids */
 unsigned int total_cpus;
 
-static ssize_t print_cpus_offline(struct sysdev_class *class, char *buf)
+static ssize_t print_cpus_offline(struct sysdev_class *class,
+				  struct sysdev_class_attribute *attr, char *buf)
 {
 	int n = 0, len = PAGE_SIZE-2;
 	cpumask_var_t offline;
@@ -204,29 +206,6 @@
 }
 static SYSDEV_CLASS_ATTR(offline, 0444, print_cpus_offline, NULL);
 
-static struct sysdev_class_attribute *cpu_state_attr[] = {
-	&attr_online_map,
-	&attr_possible_map,
-	&attr_present_map,
-	&attr_kernel_max,
-	&attr_offline,
-};
-
-static int cpu_states_init(void)
-{
-	int i;
-	int err = 0;
-
-	for (i = 0;  i < ARRAY_SIZE(cpu_state_attr); i++) {
-		int ret;
-		ret = sysdev_class_create_file(&cpu_sysdev_class,
-						cpu_state_attr[i]);
-		if (!err)
-			err = ret;
-	}
-	return err;
-}
-
 /*
  * register_cpu - Setup a sysfs device for a CPU.
  * @cpu - cpu->hotpluggable field set to 1 will generate a control file in
@@ -272,9 +251,6 @@
 	int err;
 
 	err = sysdev_class_register(&cpu_sysdev_class);
-	if (!err)
-		err = cpu_states_init();
-
 #if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
 	if (!err)
 		err = sched_create_sysfs_power_savings_entries(&cpu_sysdev_class);
@@ -282,3 +258,16 @@
 
 	return err;
 }
+
+static struct sysdev_class_attribute *cpu_sysdev_class_attrs[] = {
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+	&attr_probe,
+	&attr_release,
+#endif
+	&cpu_attrs[0].attr,
+	&cpu_attrs[1].attr,
+	&cpu_attrs[2].attr,
+	&attr_kernel_max,
+	&attr_offline,
+	NULL
+};
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index ee95c76..c89291f 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -85,7 +85,7 @@
  * for before calling this. (It is ok to call with no other effort
  * from a driver's probe() method.)
  *
- * This function must be called with @dev->sem held.
+ * This function must be called with the device lock held.
  */
 int device_bind_driver(struct device *dev)
 {
@@ -190,8 +190,8 @@
  * This function returns -ENODEV if the device is not registered,
  * 1 if the device is bound successfully and 0 otherwise.
  *
- * This function must be called with @dev->sem held.  When called for a
- * USB interface, @dev->parent->sem must be held as well.
+ * This function must be called with @dev lock held.  When called for a
+ * USB interface, @dev->parent lock must be held as well.
  */
 int driver_probe_device(struct device_driver *drv, struct device *dev)
 {
@@ -233,13 +233,13 @@
  * 0 if no matching driver was found;
  * -ENODEV if the device is not registered.
  *
- * When called for a USB interface, @dev->parent->sem must be held.
+ * When called for a USB interface, @dev->parent lock must be held.
  */
 int device_attach(struct device *dev)
 {
 	int ret = 0;
 
-	down(&dev->sem);
+	device_lock(dev);
 	if (dev->driver) {
 		ret = device_bind_driver(dev);
 		if (ret == 0)
@@ -253,7 +253,7 @@
 		ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
 		pm_runtime_put_sync(dev);
 	}
-	up(&dev->sem);
+	device_unlock(dev);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(device_attach);
@@ -276,13 +276,13 @@
 		return 0;
 
 	if (dev->parent)	/* Needed for USB */
-		down(&dev->parent->sem);
-	down(&dev->sem);
+		device_lock(dev->parent);
+	device_lock(dev);
 	if (!dev->driver)
 		driver_probe_device(drv, dev);
-	up(&dev->sem);
+	device_unlock(dev);
 	if (dev->parent)
-		up(&dev->parent->sem);
+		device_unlock(dev->parent);
 
 	return 0;
 }
@@ -303,8 +303,8 @@
 EXPORT_SYMBOL_GPL(driver_attach);
 
 /*
- * __device_release_driver() must be called with @dev->sem held.
- * When called for a USB interface, @dev->parent->sem must be held as well.
+ * __device_release_driver() must be called with @dev lock held.
+ * When called for a USB interface, @dev->parent lock must be held as well.
  */
 static void __device_release_driver(struct device *dev)
 {
@@ -343,7 +343,7 @@
  * @dev: device.
  *
  * Manually detach device from driver.
- * When called for a USB interface, @dev->parent->sem must be held.
+ * When called for a USB interface, @dev->parent lock must be held.
  */
 void device_release_driver(struct device *dev)
 {
@@ -352,9 +352,9 @@
 	 * within their ->remove callback for the same device, they
 	 * will deadlock right here.
 	 */
-	down(&dev->sem);
+	device_lock(dev);
 	__device_release_driver(dev);
-	up(&dev->sem);
+	device_unlock(dev);
 }
 EXPORT_SYMBOL_GPL(device_release_driver);
 
@@ -381,13 +381,13 @@
 		spin_unlock(&drv->p->klist_devices.k_lock);
 
 		if (dev->parent)	/* Needed for USB */
-			down(&dev->parent->sem);
-		down(&dev->sem);
+			device_lock(dev->parent);
+		device_lock(dev);
 		if (dev->driver == drv)
 			__device_release_driver(dev);
-		up(&dev->sem);
+		device_unlock(dev);
 		if (dev->parent)
-			up(&dev->parent->sem);
+			device_unlock(dev->parent);
 		put_device(dev);
 	}
 }
diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c
index 42ae452..dac478c 100644
--- a/drivers/base/devtmpfs.c
+++ b/drivers/base/devtmpfs.c
@@ -301,6 +301,19 @@
 		if (dentry->d_inode) {
 			err = vfs_getattr(nd.path.mnt, dentry, &stat);
 			if (!err && dev_mynode(dev, dentry->d_inode, &stat)) {
+				struct iattr newattrs;
+				/*
+				 * before unlinking this node, reset permissions
+				 * of possible references like hardlinks
+				 */
+				newattrs.ia_uid = 0;
+				newattrs.ia_gid = 0;
+				newattrs.ia_mode = stat.mode & ~0777;
+				newattrs.ia_valid =
+					ATTR_UID|ATTR_GID|ATTR_MODE;
+				mutex_lock(&dentry->d_inode->i_mutex);
+				notify_change(dentry, &newattrs);
+				mutex_unlock(&dentry->d_inode->i_mutex);
 				err = vfs_unlink(nd.path.dentry->d_inode,
 						 dentry);
 				if (!err || err == -ENOENT)
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index a950241..d0dc26a 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -19,7 +19,6 @@
 #include <linux/kthread.h>
 #include <linux/highmem.h>
 #include <linux/firmware.h>
-#include "base.h"
 
 #define to_dev(obj) container_of(obj, struct device, kobj)
 
@@ -69,7 +68,9 @@
 }
 
 static ssize_t
-firmware_timeout_show(struct class *class, char *buf)
+firmware_timeout_show(struct class *class,
+		      struct class_attribute *attr,
+		      char *buf)
 {
 	return sprintf(buf, "%d\n", loading_timeout);
 }
@@ -87,7 +88,9 @@
  *	Note: zero means 'wait forever'.
  **/
 static ssize_t
-firmware_timeout_store(struct class *class, const char *buf, size_t count)
+firmware_timeout_store(struct class *class,
+			struct class_attribute *attr,
+			const char *buf, size_t count)
 {
 	loading_timeout = simple_strtol(buf, NULL, 10);
 	if (loading_timeout < 0)
@@ -610,7 +613,7 @@
 }
 
 /**
- * request_firmware_nowait: asynchronous version of request_firmware
+ * request_firmware_nowait - asynchronous version of request_firmware
  * @module: module requesting the firmware
  * @uevent: sends uevent to copy the firmware image if this flag
  *	is non-zero else the firmware copy must be done manually.
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index bd02505..2f86915 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -44,7 +44,7 @@
 	return retval;
 }
 
-static struct kset_uevent_ops memory_uevent_ops = {
+static const struct kset_uevent_ops memory_uevent_ops = {
 	.name		= memory_uevent_name,
 	.uevent		= memory_uevent,
 };
@@ -309,17 +309,18 @@
  * Block size attribute stuff
  */
 static ssize_t
-print_block_size(struct class *class, char *buf)
+print_block_size(struct sysdev_class *class, struct sysdev_class_attribute *attr,
+		 char *buf)
 {
 	return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
 }
 
-static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
+static SYSDEV_CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
 
 static int block_size_init(void)
 {
 	return sysfs_create_file(&memory_sysdev_class.kset.kobj,
-				&class_attr_block_size_bytes.attr);
+				&attr_block_size_bytes.attr);
 }
 
 /*
@@ -330,7 +331,8 @@
  */
 #ifdef CONFIG_ARCH_MEMORY_PROBE
 static ssize_t
-memory_probe_store(struct class *class, const char *buf, size_t count)
+memory_probe_store(struct class *class, struct class_attribute *attr,
+		   const char *buf, size_t count)
 {
 	u64 phys_addr;
 	int nid;
@@ -367,7 +369,9 @@
 
 /* Soft offline a page */
 static ssize_t
-store_soft_offline_page(struct class *class, const char *buf, size_t count)
+store_soft_offline_page(struct class *class,
+			struct class_attribute *attr,
+			const char *buf, size_t count)
 {
 	int ret;
 	u64 pfn;
@@ -384,7 +388,9 @@
 
 /* Forcibly offline a page, including killing processes. */
 static ssize_t
-store_hard_offline_page(struct class *class, const char *buf, size_t count)
+store_hard_offline_page(struct class *class,
+			struct class_attribute *attr,
+			const char *buf, size_t count)
 {
 	int ret;
 	u64 pfn;
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 7012279..ad43185 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -16,8 +16,11 @@
 #include <linux/device.h>
 #include <linux/swap.h>
 
+static struct sysdev_class_attribute *node_state_attrs[];
+
 static struct sysdev_class node_class = {
 	.name = "node",
+	.attrs = node_state_attrs,
 };
 
 
@@ -544,76 +547,52 @@
 	return n;
 }
 
-static ssize_t print_nodes_possible(struct sysdev_class *class, char *buf)
-{
-	return print_nodes_state(N_POSSIBLE, buf);
-}
-
-static ssize_t print_nodes_online(struct sysdev_class *class, char *buf)
-{
-	return print_nodes_state(N_ONLINE, buf);
-}
-
-static ssize_t print_nodes_has_normal_memory(struct sysdev_class *class,
-						char *buf)
-{
-	return print_nodes_state(N_NORMAL_MEMORY, buf);
-}
-
-static ssize_t print_nodes_has_cpu(struct sysdev_class *class, char *buf)
-{
-	return print_nodes_state(N_CPU, buf);
-}
-
-static SYSDEV_CLASS_ATTR(possible, 0444, print_nodes_possible, NULL);
-static SYSDEV_CLASS_ATTR(online, 0444, print_nodes_online, NULL);
-static SYSDEV_CLASS_ATTR(has_normal_memory, 0444, print_nodes_has_normal_memory,
-									NULL);
-static SYSDEV_CLASS_ATTR(has_cpu, 0444, print_nodes_has_cpu, NULL);
-
-#ifdef CONFIG_HIGHMEM
-static ssize_t print_nodes_has_high_memory(struct sysdev_class *class,
-						 char *buf)
-{
-	return print_nodes_state(N_HIGH_MEMORY, buf);
-}
-
-static SYSDEV_CLASS_ATTR(has_high_memory, 0444, print_nodes_has_high_memory,
-									 NULL);
-#endif
-
-struct sysdev_class_attribute *node_state_attr[] = {
-	&attr_possible,
-	&attr_online,
-	&attr_has_normal_memory,
-#ifdef CONFIG_HIGHMEM
-	&attr_has_high_memory,
-#endif
-	&attr_has_cpu,
+struct node_attr {
+	struct sysdev_class_attribute attr;
+	enum node_states state;
 };
 
-static int node_states_init(void)
+static ssize_t show_node_state(struct sysdev_class *class,
+			       struct sysdev_class_attribute *attr, char *buf)
 {
-	int i;
-	int err = 0;
-
-	for (i = 0;  i < NR_NODE_STATES; i++) {
-		int ret;
-		ret = sysdev_class_create_file(&node_class, node_state_attr[i]);
-		if (!err)
-			err = ret;
-	}
-	return err;
+	struct node_attr *na = container_of(attr, struct node_attr, attr);
+	return print_nodes_state(na->state, buf);
 }
 
+#define _NODE_ATTR(name, state) \
+	{ _SYSDEV_CLASS_ATTR(name, 0444, show_node_state, NULL), state }
+
+static struct node_attr node_state_attr[] = {
+	_NODE_ATTR(possible, N_POSSIBLE),
+	_NODE_ATTR(online, N_ONLINE),
+	_NODE_ATTR(has_normal_memory, N_NORMAL_MEMORY),
+	_NODE_ATTR(has_cpu, N_CPU),
+#ifdef CONFIG_HIGHMEM
+	_NODE_ATTR(has_high_memory, N_HIGH_MEMORY),
+#endif
+};
+
+static struct sysdev_class_attribute *node_state_attrs[] = {
+	&node_state_attr[0].attr,
+	&node_state_attr[1].attr,
+	&node_state_attr[2].attr,
+	&node_state_attr[3].attr,
+#ifdef CONFIG_HIGHMEM
+	&node_state_attr[4].attr,
+#endif
+	NULL
+};
+
 #define NODE_CALLBACK_PRI	2	/* lower than SLAB */
 static int __init register_node_type(void)
 {
 	int ret;
 
+ 	BUILD_BUG_ON(ARRAY_SIZE(node_state_attr) != NR_NODE_STATES);
+ 	BUILD_BUG_ON(ARRAY_SIZE(node_state_attrs)-1 != NR_NODE_STATES);
+
 	ret = sysdev_class_register(&node_class);
 	if (!ret) {
-		ret = node_states_init();
 		hotplug_memory_notifier(node_memory_callback,
 					NODE_CALLBACK_PRI);
 	}
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 58efaf2..1ba9d617 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -128,7 +128,7 @@
 };
 
 /**
- * platform_device_put
+ * platform_device_put - destroy a platform device
  * @pdev: platform device to free
  *
  * Free all memory associated with a platform device.  This function must
@@ -152,7 +152,7 @@
 }
 
 /**
- * platform_device_alloc
+ * platform_device_alloc - create a platform device
  * @name: base name of the device we're adding
  * @id: instance id
  *
@@ -177,7 +177,7 @@
 EXPORT_SYMBOL_GPL(platform_device_alloc);
 
 /**
- * platform_device_add_resources
+ * platform_device_add_resources - add resources to a platform device
  * @pdev: platform device allocated by platform_device_alloc to add resources to
  * @res: set of resources that needs to be allocated for the device
  * @num: number of resources
@@ -202,7 +202,7 @@
 EXPORT_SYMBOL_GPL(platform_device_add_resources);
 
 /**
- * platform_device_add_data
+ * platform_device_add_data - add platform-specific data to a platform device
  * @pdev: platform device allocated by platform_device_alloc to add resources to
  * @data: platform specific data for this platform device
  * @size: size of platform specific data
@@ -344,7 +344,7 @@
 EXPORT_SYMBOL_GPL(platform_device_unregister);
 
 /**
- * platform_device_register_simple
+ * platform_device_register_simple - add a platform-level device and its resources
  * @name: base name of the device we're adding
  * @id: instance id
  * @res: set of resources that needs to be allocated for the device
@@ -396,7 +396,7 @@
 EXPORT_SYMBOL_GPL(platform_device_register_simple);
 
 /**
- * platform_device_register_data
+ * platform_device_register_data - add a platform-level device with platform-specific data
  * @parent: parent device for the device we're adding
  * @name: base name of the device we're adding
  * @id: instance id
@@ -473,7 +473,7 @@
 }
 
 /**
- * platform_driver_register
+ * platform_driver_register - register a driver for platform-level devices
  * @drv: platform driver structure
  */
 int platform_driver_register(struct platform_driver *drv)
@@ -491,7 +491,7 @@
 EXPORT_SYMBOL_GPL(platform_driver_register);
 
 /**
- * platform_driver_unregister
+ * platform_driver_unregister - unregister a driver for platform-level devices
  * @drv: platform driver structure
  */
 void platform_driver_unregister(struct platform_driver *drv)
@@ -548,6 +548,64 @@
 }
 EXPORT_SYMBOL_GPL(platform_driver_probe);
 
+/**
+ * platform_create_bundle - register driver and create corresponding device
+ * @driver: platform driver structure
+ * @probe: the driver probe routine, probably from an __init section
+ * @res: set of resources that needs to be allocated for the device
+ * @n_res: number of resources
+ * @data: platform specific data for this platform device
+ * @size: size of platform specific data
+ *
+ * Use this in legacy-style modules that probe hardware directly and
+ * register a single platform device and corresponding platform driver.
+ */
+struct platform_device * __init_or_module platform_create_bundle(
+			struct platform_driver *driver,
+			int (*probe)(struct platform_device *),
+			struct resource *res, unsigned int n_res,
+			const void *data, size_t size)
+{
+	struct platform_device *pdev;
+	int error;
+
+	pdev = platform_device_alloc(driver->driver.name, -1);
+	if (!pdev) {
+		error = -ENOMEM;
+		goto err_out;
+	}
+
+	if (res) {
+		error = platform_device_add_resources(pdev, res, n_res);
+		if (error)
+			goto err_pdev_put;
+	}
+
+	if (data) {
+		error = platform_device_add_data(pdev, data, size);
+		if (error)
+			goto err_pdev_put;
+	}
+
+	error = platform_device_add(pdev);
+	if (error)
+		goto err_pdev_put;
+
+	error = platform_driver_probe(driver, probe);
+	if (error)
+		goto err_pdev_del;
+
+	return pdev;
+
+err_pdev_del:
+	platform_device_del(pdev);
+err_pdev_put:
+	platform_device_put(pdev);
+err_out:
+	return ERR_PTR(error);
+}
+EXPORT_SYMBOL_GPL(platform_create_bundle);
+
 /* modalias support enables more hands-off userspace setup:
  * (a) environment variable lets new-style hotplug events work once system is
  *     fully running:  "modprobe $MODALIAS"
@@ -578,7 +636,7 @@
 }
 
 static const struct platform_device_id *platform_match_id(
-			struct platform_device_id *id,
+			const struct platform_device_id *id,
 			struct platform_device *pdev)
 {
 	while (id->name[0]) {
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 0e26a6f..d477f4d 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -35,8 +35,8 @@
  * because children are guaranteed to be discovered after parents, and
  * are inserted at the back of the list on discovery.
  *
- * Since device_pm_add() may be called with a device semaphore held,
- * we must never try to acquire a device semaphore while holding
+ * Since device_pm_add() may be called with a device lock held,
+ * we must never try to acquire a device lock while holding
  * dpm_list_mutex.
  */
 
@@ -508,7 +508,7 @@
 	TRACE_RESUME(0);
 
 	dpm_wait(dev->parent, async);
-	down(&dev->sem);
+	device_lock(dev);
 
 	dev->power.status = DPM_RESUMING;
 
@@ -543,7 +543,7 @@
 		}
 	}
  End:
-	up(&dev->sem);
+	device_unlock(dev);
 	complete_all(&dev->power.completion);
 
 	TRACE_RESUME(error);
@@ -629,7 +629,7 @@
  */
 static void device_complete(struct device *dev, pm_message_t state)
 {
-	down(&dev->sem);
+	device_lock(dev);
 
 	if (dev->class && dev->class->pm && dev->class->pm->complete) {
 		pm_dev_dbg(dev, state, "completing class ");
@@ -646,7 +646,7 @@
 		dev->bus->pm->complete(dev);
 	}
 
-	up(&dev->sem);
+	device_unlock(dev);
 }
 
 /**
@@ -809,7 +809,7 @@
 	int error = 0;
 
 	dpm_wait_for_children(dev, async);
-	down(&dev->sem);
+	device_lock(dev);
 
 	if (async_error)
 		goto End;
@@ -849,7 +849,7 @@
 		dev->power.status = DPM_OFF;
 
  End:
-	up(&dev->sem);
+	device_unlock(dev);
 	complete_all(&dev->power.completion);
 
 	return error;
@@ -938,7 +938,7 @@
 {
 	int error = 0;
 
-	down(&dev->sem);
+	device_lock(dev);
 
 	if (dev->bus && dev->bus->pm && dev->bus->pm->prepare) {
 		pm_dev_dbg(dev, state, "preparing ");
@@ -962,7 +962,7 @@
 		suspend_report_result(dev->class->pm->prepare, error);
 	}
  End:
-	up(&dev->sem);
+	device_unlock(dev);
 
 	return error;
 }
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 0d90390..8980fee 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -54,7 +54,7 @@
 	return -EIO;
 }
 
-static struct sysfs_ops sysfs_ops = {
+static const struct sysfs_ops sysfs_ops = {
 	.show	= sysdev_show,
 	.store	= sysdev_store,
 };
@@ -89,7 +89,7 @@
 	struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr);
 
 	if (class_attr->show)
-		return class_attr->show(class, buffer);
+		return class_attr->show(class, class_attr, buffer);
 	return -EIO;
 }
 
@@ -100,11 +100,11 @@
 	struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr);
 
 	if (class_attr->store)
-		return class_attr->store(class, buffer, count);
+		return class_attr->store(class, class_attr, buffer, count);
 	return -EIO;
 }
 
-static struct sysfs_ops sysfs_class_ops = {
+static const struct sysfs_ops sysfs_class_ops = {
 	.show	= sysdev_class_show,
 	.store	= sysdev_class_store,
 };
@@ -145,13 +145,20 @@
 	if (retval)
 		return retval;
 
-	return kset_register(&cls->kset);
+	retval = kset_register(&cls->kset);
+	if (!retval && cls->attrs)
+		retval = sysfs_create_files(&cls->kset.kobj,
+					    (const struct attribute **)cls->attrs);
+	return retval;
 }
 
 void sysdev_class_unregister(struct sysdev_class *cls)
 {
 	pr_debug("Unregistering sysdev class '%s'\n",
 		 kobject_name(&cls->kset.kobj));
+	if (cls->attrs)
+		sysfs_remove_files(&cls->kset.kobj,
+				   (const struct attribute **)cls->attrs);
 	kset_unregister(&cls->kset);
 }
 
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 2d5cebb..e5e86a7 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -95,7 +95,7 @@
 
 /* All EEs on the free list should have ID_VACANT (== 0)
  * freshly allocated EEs get !ID_VACANT (== 1)
- * so if it says "cannot dereference null pointer at adress 0x00000001",
+ * so if it says "cannot dereference null pointer at address 0x00000001",
  * it is most likely one of these :( */
 
 #define ID_IN_SYNC      (4711ULL)
@@ -1181,7 +1181,7 @@
 /* Meta data layout
    We reserve a 128MB Block (4k aligned)
    * either at the end of the backing device
-   * or on a seperate meta data device. */
+   * or on a separate meta data device. */
 
 #define MD_RESERVED_SECT (128LU << 11)  /* 128 MB, unit sectors */
 /* The following numbers are sectors */
diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h
index f22c1bc..16119d7 100644
--- a/drivers/block/drbd/drbd_req.h
+++ b/drivers/block/drbd/drbd_req.h
@@ -57,7 +57,7 @@
  *
  *  It may me handed over to the local disk subsystem.
  *  It may be completed by the local disk subsystem,
- *    either sucessfully or with io-error.
+ *    either successfully or with io-error.
  *  In case it is a READ request, and it failed locally,
  *    it may be retried remotely.
  *
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index b9b1170..90c4038 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -144,13 +144,23 @@
  * Better audit of register_blkdev.
  */
 
-#define FLOPPY_SANITY_CHECK
 #undef  FLOPPY_SILENT_DCL_CLEAR
 
 #define REALLY_SLOW_IO
 
 #define DEBUGT 2
-#define DCL_DEBUG	/* debug disk change line */
+
+#define DPRINT(format, args...) \
+	pr_info("floppy%d: " format, current_drive, ##args)
+
+#define DCL_DEBUG		/* debug disk change line */
+#ifdef DCL_DEBUG
+#define debug_dcl(test, fmt, args...) \
+	do { if ((test) & FD_DEBUG) DPRINT(fmt, ##args); } while (0)
+#else
+#define debug_dcl(test, fmt, args...) \
+	do { if (0) DPRINT(fmt, ##args); } while (0)
+#endif
 
 /* do print messages for unexpected interrupts */
 static int print_unex = 1;
@@ -180,6 +190,8 @@
 #include <linux/mod_devicetable.h>
 #include <linux/buffer_head.h>	/* for invalidate_buffers() */
 #include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
 /*
  * PS/2 floppies have much slower step rates than regular floppies.
@@ -191,8 +203,6 @@
 #include <asm/dma.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
 
 static int FLOPPY_IRQ = 6;
 static int FLOPPY_DMA = 2;
@@ -241,8 +251,6 @@
 
 static int irqdma_allocated;
 
-#define DEVICE_NAME "floppy"
-
 #include <linux/blkdev.h>
 #include <linux/blkpg.h>
 #include <linux/cdrom.h>	/* for the compatibility eject ioctl */
@@ -250,7 +258,7 @@
 
 static struct request *current_req;
 static struct request_queue *floppy_queue;
-static void do_fd_request(struct request_queue * q);
+static void do_fd_request(struct request_queue *q);
 
 #ifndef fd_get_dma_residue
 #define fd_get_dma_residue() get_dma_residue(FLOPPY_DMA)
@@ -263,7 +271,7 @@
 #endif
 
 #ifndef fd_dma_mem_alloc
-#define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL,get_order(size))
+#define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL, get_order(size))
 #endif
 
 static inline void fallback_on_nodma_alloc(char **addr, size_t l)
@@ -273,7 +281,7 @@
 		return;		/* we have the memory */
 	if (can_use_virtual_dma != 2)
 		return;		/* no fallback allowed */
-	printk("DMA memory shortage. Temporarily falling back on virtual DMA\n");
+	pr_info("DMA memory shortage. Temporarily falling back on virtual DMA\n");
 	*addr = (char *)nodma_mem_alloc(l);
 #else
 	return;
@@ -283,59 +291,50 @@
 /* End dma memory related stuff */
 
 static unsigned long fake_change;
-static int initialising = 1;
+static bool initialized;
 
-#define ITYPE(x) (((x)>>2) & 0x1f)
-#define TOMINOR(x) ((x & 3) | ((x & 4) << 5))
-#define UNIT(x) ((x) & 0x03)	/* drive on fdc */
-#define FDC(x) (((x) & 0x04) >> 2)	/* fdc of drive */
+#define ITYPE(x)	(((x) >> 2) & 0x1f)
+#define TOMINOR(x)	((x & 3) | ((x & 4) << 5))
+#define UNIT(x)		((x) & 0x03)		/* drive on fdc */
+#define FDC(x)		(((x) & 0x04) >> 2)	/* fdc of drive */
 	/* reverse mapping from unit and fdc to drive */
 #define REVDRIVE(fdc, unit) ((unit) + ((fdc) << 2))
-#define DP (&drive_params[current_drive])
-#define DRS (&drive_state[current_drive])
-#define DRWE (&write_errors[current_drive])
-#define FDCS (&fdc_state[fdc])
-#define CLEARF(x) clear_bit(x##_BIT, &DRS->flags)
-#define SETF(x) set_bit(x##_BIT, &DRS->flags)
-#define TESTF(x) test_bit(x##_BIT, &DRS->flags)
 
-#define UDP (&drive_params[drive])
-#define UDRS (&drive_state[drive])
-#define UDRWE (&write_errors[drive])
-#define UFDCS (&fdc_state[FDC(drive)])
-#define UCLEARF(x) clear_bit(x##_BIT, &UDRS->flags)
-#define USETF(x) set_bit(x##_BIT, &UDRS->flags)
-#define UTESTF(x) test_bit(x##_BIT, &UDRS->flags)
+#define DP	(&drive_params[current_drive])
+#define DRS	(&drive_state[current_drive])
+#define DRWE	(&write_errors[current_drive])
+#define FDCS	(&fdc_state[fdc])
 
-#define DPRINT(format, args...) printk(DEVICE_NAME "%d: " format, current_drive , ## args)
+#define UDP	(&drive_params[drive])
+#define UDRS	(&drive_state[drive])
+#define UDRWE	(&write_errors[drive])
+#define UFDCS	(&fdc_state[FDC(drive)])
 
-#define PH_HEAD(floppy,head) (((((floppy)->stretch & 2) >>1) ^ head) << 2)
-#define STRETCH(floppy) ((floppy)->stretch & FD_STRETCH)
-
-#define CLEARSTRUCT(x) memset((x), 0, sizeof(*(x)))
+#define PH_HEAD(floppy, head) (((((floppy)->stretch & 2) >> 1) ^ head) << 2)
+#define STRETCH(floppy)	((floppy)->stretch & FD_STRETCH)
 
 /* read/write */
-#define COMMAND raw_cmd->cmd[0]
-#define DR_SELECT raw_cmd->cmd[1]
-#define TRACK raw_cmd->cmd[2]
-#define HEAD raw_cmd->cmd[3]
-#define SECTOR raw_cmd->cmd[4]
-#define SIZECODE raw_cmd->cmd[5]
-#define SECT_PER_TRACK raw_cmd->cmd[6]
-#define GAP raw_cmd->cmd[7]
-#define SIZECODE2 raw_cmd->cmd[8]
+#define COMMAND		(raw_cmd->cmd[0])
+#define DR_SELECT	(raw_cmd->cmd[1])
+#define TRACK		(raw_cmd->cmd[2])
+#define HEAD		(raw_cmd->cmd[3])
+#define SECTOR		(raw_cmd->cmd[4])
+#define SIZECODE	(raw_cmd->cmd[5])
+#define SECT_PER_TRACK	(raw_cmd->cmd[6])
+#define GAP		(raw_cmd->cmd[7])
+#define SIZECODE2	(raw_cmd->cmd[8])
 #define NR_RW 9
 
 /* format */
-#define F_SIZECODE raw_cmd->cmd[2]
-#define F_SECT_PER_TRACK raw_cmd->cmd[3]
-#define F_GAP raw_cmd->cmd[4]
-#define F_FILL raw_cmd->cmd[5]
+#define F_SIZECODE	(raw_cmd->cmd[2])
+#define F_SECT_PER_TRACK (raw_cmd->cmd[3])
+#define F_GAP		(raw_cmd->cmd[4])
+#define F_FILL		(raw_cmd->cmd[5])
 #define NR_F 6
 
 /*
- * Maximum disk size (in kilobytes). This default is used whenever the
- * current disk size is unknown.
+ * Maximum disk size (in kilobytes).
+ * This default is used whenever the current disk size is unknown.
  * [Now it is rather a minimum]
  */
 #define MAX_DISK_SIZE 4		/* 3984 */
@@ -345,16 +344,17 @@
  */
 #define MAX_REPLIES 16
 static unsigned char reply_buffer[MAX_REPLIES];
-static int inr;			/* size of reply buffer, when called from interrupt */
-#define ST0 (reply_buffer[0])
-#define ST1 (reply_buffer[1])
-#define ST2 (reply_buffer[2])
-#define ST3 (reply_buffer[0])	/* result of GETSTATUS */
-#define R_TRACK (reply_buffer[3])
-#define R_HEAD (reply_buffer[4])
-#define R_SECTOR (reply_buffer[5])
-#define R_SIZECODE (reply_buffer[6])
-#define SEL_DLY (2*HZ/100)
+static int inr;		/* size of reply buffer, when called from interrupt */
+#define ST0		(reply_buffer[0])
+#define ST1		(reply_buffer[1])
+#define ST2		(reply_buffer[2])
+#define ST3		(reply_buffer[0])	/* result of GETSTATUS */
+#define R_TRACK		(reply_buffer[3])
+#define R_HEAD		(reply_buffer[4])
+#define R_SECTOR	(reply_buffer[5])
+#define R_SIZECODE	(reply_buffer[6])
+
+#define SEL_DLY		(2 * HZ / 100)
 
 /*
  * this struct defines the different floppy drive types.
@@ -505,9 +505,9 @@
 static int probing;
 
 /* Synchronization of FDC access. */
-#define FD_COMMAND_NONE -1
-#define FD_COMMAND_ERROR 2
-#define FD_COMMAND_OKAY 3
+#define FD_COMMAND_NONE		-1
+#define FD_COMMAND_ERROR	2
+#define FD_COMMAND_OKAY		3
 
 static volatile int command_status = FD_COMMAND_NONE;
 static unsigned long fdc_busy;
@@ -515,11 +515,6 @@
 static DECLARE_WAIT_QUEUE_HEAD(command_done);
 
 #define NO_SIGNAL (!interruptible || !signal_pending(current))
-#define CALL(x) if ((x) == -EINTR) return -EINTR
-#define ECALL(x) if ((ret = (x))) return ret;
-#define _WAIT(x,i) CALL(ret=wait_til_done((x),i))
-#define WAIT(x) _WAIT((x),interruptible)
-#define IWAIT(x) _WAIT((x),1)
 
 /* Errors during formatting are counted here. */
 static int format_errors;
@@ -545,8 +540,9 @@
 static int *errors;
 typedef void (*done_f)(int);
 static struct cont_t {
-	void (*interrupt)(void);	/* this is called after the interrupt of the
-					 * main command */
+	void (*interrupt)(void);
+				/* this is called after the interrupt of the
+				 * main command */
 	void (*redo)(void);	/* this is called to retry the operation */
 	void (*error)(void);	/* this is called to tally an error */
 	done_f done;		/* this is called to say if the operation has
@@ -571,7 +567,6 @@
  * reset doesn't need to be tested before sending commands, because
  * output_byte is automatically disabled when reset is set.
  */
-#define CHECK_RESET { if (FDCS->reset){ reset_fdc(); return; } }
 static void reset_fdc(void);
 
 /*
@@ -579,9 +574,9 @@
  * information to interrupts. They are the data used for the current
  * request.
  */
-#define NO_TRACK -1
-#define NEED_1_RECAL -2
-#define NEED_2_RECAL -3
+#define NO_TRACK	-1
+#define NEED_1_RECAL	-2
+#define NEED_2_RECAL	-3
 
 static int usage_count;
 
@@ -621,39 +616,35 @@
 	debugtimer = jiffies;
 }
 
-static inline void debugt(const char *message)
+static inline void debugt(const char *func, const char *msg)
 {
 	if (DP->flags & DEBUGT)
-		printk("%s dtime=%lu\n", message, jiffies - debugtimer);
+		pr_info("%s:%s dtime=%lu\n", func, msg, jiffies - debugtimer);
 }
 #else
 static inline void set_debugt(void) { }
-static inline void debugt(const char *message) { }
+static inline void debugt(const char *func, const char *msg) { }
 #endif /* DEBUGT */
 
-typedef void (*timeout_fn) (unsigned long);
+typedef void (*timeout_fn)(unsigned long);
 static DEFINE_TIMER(fd_timeout, floppy_shutdown, 0, 0);
 
 static const char *timeout_message;
 
-#ifdef FLOPPY_SANITY_CHECK
-static void is_alive(const char *message)
+static void is_alive(const char *func, const char *message)
 {
 	/* this routine checks whether the floppy driver is "alive" */
-	if (test_bit(0, &fdc_busy) && command_status < 2
-	    && !timer_pending(&fd_timeout)) {
-		DPRINT("timeout handler died: %s\n", message);
+	if (test_bit(0, &fdc_busy) && command_status < 2 &&
+	    !timer_pending(&fd_timeout)) {
+		DPRINT("%s: timeout handler died.  %s\n", func, message);
 	}
 }
-#endif
 
-static void (*do_floppy) (void) = NULL;
-
-#ifdef FLOPPY_SANITY_CHECK
+static void (*do_floppy)(void) = NULL;
 
 #define OLOGSIZE 20
 
-static void (*lasthandler) (void);
+static void (*lasthandler)(void);
 static unsigned long interruptjiffies;
 static unsigned long resultjiffies;
 static int resultsize;
@@ -666,12 +657,11 @@
 } output_log[OLOGSIZE];
 
 static int output_log_pos;
-#endif
 
 #define current_reqD -1
 #define MAXTIMEOUT -2
 
-static void __reschedule_timeout(int drive, const char *message, int marg)
+static void __reschedule_timeout(int drive, const char *message)
 {
 	if (drive == current_reqD)
 		drive = current_drive;
@@ -682,25 +672,22 @@
 	} else
 		fd_timeout.expires = jiffies + UDP->timeout;
 	add_timer(&fd_timeout);
-	if (UDP->flags & FD_DEBUG) {
-		DPRINT("reschedule timeout ");
-		printk(message, marg);
-		printk("\n");
-	}
+	if (UDP->flags & FD_DEBUG)
+		DPRINT("reschedule timeout %s\n", message);
 	timeout_message = message;
 }
 
-static void reschedule_timeout(int drive, const char *message, int marg)
+static void reschedule_timeout(int drive, const char *message)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&floppy_lock, flags);
-	__reschedule_timeout(drive, message, marg);
+	__reschedule_timeout(drive, message);
 	spin_unlock_irqrestore(&floppy_lock, flags);
 }
 
-#define INFBOUND(a,b) (a)=max_t(int, a, b)
-#define SUPBOUND(a,b) (a)=min_t(int, a, b)
+#define INFBOUND(a, b) (a) = max_t(int, a, b)
+#define SUPBOUND(a, b) (a) = min_t(int, a, b)
 
 /*
  * Bottom half floppy driver.
@@ -739,7 +726,6 @@
 {
 	int fdc = FDC(drive);
 
-#ifdef FLOPPY_SANITY_CHECK
 	if (time_before(jiffies, UDRS->select_date + UDP->select_delay))
 		DPRINT("WARNING disk change called early\n");
 	if (!(FDCS->dor & (0x10 << UNIT(drive))) ||
@@ -748,31 +734,27 @@
 		DPRINT("drive=%d fdc=%d dor=%x\n", drive, FDC(drive),
 		       (unsigned int)FDCS->dor);
 	}
-#endif
 
-#ifdef DCL_DEBUG
-	if (UDP->flags & FD_DEBUG) {
-		DPRINT("checking disk change line for drive %d\n", drive);
-		DPRINT("jiffies=%lu\n", jiffies);
-		DPRINT("disk change line=%x\n", fd_inb(FD_DIR) & 0x80);
-		DPRINT("flags=%lx\n", UDRS->flags);
-	}
-#endif
+	debug_dcl(UDP->flags,
+		  "checking disk change line for drive %d\n", drive);
+	debug_dcl(UDP->flags, "jiffies=%lu\n", jiffies);
+	debug_dcl(UDP->flags, "disk change line=%x\n", fd_inb(FD_DIR) & 0x80);
+	debug_dcl(UDP->flags, "flags=%lx\n", UDRS->flags);
+
 	if (UDP->flags & FD_BROKEN_DCL)
-		return UTESTF(FD_DISK_CHANGED);
+		return test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
 	if ((fd_inb(FD_DIR) ^ UDP->flags) & 0x80) {
-		USETF(FD_VERIFY);	/* verify write protection */
-		if (UDRS->maxblock) {
-			/* mark it changed */
-			USETF(FD_DISK_CHANGED);
-		}
+		set_bit(FD_VERIFY_BIT, &UDRS->flags);
+					/* verify write protection */
+
+		if (UDRS->maxblock)	/* mark it changed */
+			set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
 
 		/* invalidate its geometry */
 		if (UDRS->keep_data >= 0) {
 			if ((UDP->flags & FTD_MSG) &&
 			    current_type[drive] != NULL)
-				DPRINT("Disk type is undefined after "
-				       "disk change\n");
+				DPRINT("Disk type is undefined after disk change\n");
 			current_type[drive] = NULL;
 			floppy_sizes[TOMINOR(drive)] = MAX_DISK_SIZE << 1;
 		}
@@ -780,7 +762,7 @@
 		return 1;
 	} else {
 		UDRS->last_checked = jiffies;
-		UCLEARF(FD_DISK_NEWCHANGE);
+		clear_bit(FD_DISK_NEWCHANGE_BIT, &UDRS->flags);
 	}
 	return 0;
 }
@@ -790,6 +772,12 @@
 	return ((dor & (0x10 << unit)) && (dor & 3) == unit);
 }
 
+static bool is_ready_state(int status)
+{
+	int state = status & (STATUS_READY | STATUS_DIR | STATUS_DMA);
+	return state == STATUS_READY;
+}
+
 static int set_dor(int fdc, char mask, char data)
 {
 	unsigned char unit;
@@ -806,11 +794,8 @@
 		unit = olddor & 0x3;
 		if (is_selected(olddor, unit) && !is_selected(newdor, unit)) {
 			drive = REVDRIVE(fdc, unit);
-#ifdef DCL_DEBUG
-			if (UDP->flags & FD_DEBUG) {
-				DPRINT("calling disk change from set_dor\n");
-			}
-#endif
+			debug_dcl(UDP->flags,
+				  "calling disk change from set_dor\n");
 			disk_change(drive);
 		}
 		FDCS->dor = newdor;
@@ -834,8 +819,10 @@
 	DRS->select_date = jiffies;
 }
 
-/* reset all driver information about the current fdc. This is needed after
- * a reset, and after a raw command. */
+/*
+ * Reset all driver information about the current fdc.
+ * This is needed after a reset, and after a raw command.
+ */
 static void reset_fdc_info(int mode)
 {
 	int drive;
@@ -857,7 +844,7 @@
 		current_drive = drive;
 	}
 	if (fdc != 1 && fdc != 0) {
-		printk("bad fdc value\n");
+		pr_info("bad fdc value\n");
 		return;
 	}
 	set_dor(fdc, ~0, 8);
@@ -871,11 +858,10 @@
 }
 
 /* locks the driver */
-static int _lock_fdc(int drive, int interruptible, int line)
+static int _lock_fdc(int drive, bool interruptible, int line)
 {
 	if (!usage_count) {
-		printk(KERN_ERR
-		       "Trying to lock fdc while usage count=0 at line %d\n",
+		pr_err("Trying to lock fdc while usage count=0 at line %d\n",
 		       line);
 		return -1;
 	}
@@ -904,15 +890,13 @@
 	}
 	command_status = FD_COMMAND_NONE;
 
-	__reschedule_timeout(drive, "lock fdc", 0);
+	__reschedule_timeout(drive, "lock fdc");
 	set_fdc(drive);
 	return 0;
 }
 
-#define lock_fdc(drive,interruptible) _lock_fdc(drive,interruptible, __LINE__)
-
-#define LOCK_FDC(drive,interruptible) \
-if (lock_fdc(drive,interruptible)) return -EINTR;
+#define lock_fdc(drive, interruptible)			\
+	_lock_fdc(drive, interruptible, __LINE__)
 
 /* unlocks the driver */
 static inline void unlock_fdc(void)
@@ -924,7 +908,7 @@
 		DPRINT("FDC access conflict!\n");
 
 	if (do_floppy)
-		DPRINT("device interrupt still active at FDC release: %p!\n",
+		DPRINT("device interrupt still active at FDC release: %pf!\n",
 		       do_floppy);
 	command_status = FD_COMMAND_NONE;
 	spin_lock_irqsave(&floppy_lock, flags);
@@ -1003,7 +987,7 @@
 
 static DECLARE_WORK(floppy_work, NULL);
 
-static void schedule_bh(void (*handler) (void))
+static void schedule_bh(void (*handler)(void))
 {
 	PREPARE_WORK(&floppy_work, (work_func_t)handler);
 	schedule_work(&floppy_work);
@@ -1026,11 +1010,7 @@
  * transfer */
 static void fd_watchdog(void)
 {
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("calling disk change from watchdog\n");
-	}
-#endif
+	debug_dcl(DP->flags, "calling disk change from watchdog\n");
 
 	if (disk_change(current_drive)) {
 		DPRINT("disk removed during i/o\n");
@@ -1039,7 +1019,7 @@
 		reset_fdc();
 	} else {
 		del_timer(&fd_timer);
-		fd_timer.function = (timeout_fn) fd_watchdog;
+		fd_timer.function = (timeout_fn)fd_watchdog;
 		fd_timer.expires = jiffies + HZ / 10;
 		add_timer(&fd_timer);
 	}
@@ -1105,25 +1085,23 @@
 {
 	unsigned long f;
 
-#ifdef FLOPPY_SANITY_CHECK
 	if (raw_cmd->length == 0) {
 		int i;
 
-		printk("zero dma transfer size:");
+		pr_info("zero dma transfer size:");
 		for (i = 0; i < raw_cmd->cmd_count; i++)
-			printk("%x,", raw_cmd->cmd[i]);
-		printk("\n");
+			pr_cont("%x,", raw_cmd->cmd[i]);
+		pr_cont("\n");
 		cont->done(0);
 		FDCS->reset = 1;
 		return;
 	}
 	if (((unsigned long)raw_cmd->kernel_data) % 512) {
-		printk("non aligned address: %p\n", raw_cmd->kernel_data);
+		pr_info("non aligned address: %p\n", raw_cmd->kernel_data);
 		cont->done(0);
 		FDCS->reset = 1;
 		return;
 	}
-#endif
 	f = claim_dma_lock();
 	fd_disable_dma();
 #ifdef fd_dma_setup
@@ -1165,7 +1143,7 @@
 		if (status & STATUS_READY)
 			return status;
 	}
-	if (!initialising) {
+	if (initialized) {
 		DPRINT("Getstatus times out (%x) on fdc %d\n", status, fdc);
 		show_floppy();
 	}
@@ -1176,22 +1154,21 @@
 /* sends a command byte to the fdc */
 static int output_byte(char byte)
 {
-	int status;
+	int status = wait_til_ready();
 
-	if ((status = wait_til_ready()) < 0)
+	if (status < 0)
 		return -1;
-	if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY) {
+
+	if (is_ready_state(status)) {
 		fd_outb(byte, FD_DATA);
-#ifdef FLOPPY_SANITY_CHECK
 		output_log[output_log_pos].data = byte;
 		output_log[output_log_pos].status = status;
 		output_log[output_log_pos].jiffies = jiffies;
 		output_log_pos = (output_log_pos + 1) % OLOGSIZE;
-#endif
 		return 0;
 	}
 	FDCS->reset = 1;
-	if (!initialising) {
+	if (initialized) {
 		DPRINT("Unable to send byte %x to FDC. Fdc=%x Status=%x\n",
 		       byte, fdc, status);
 		show_floppy();
@@ -1199,8 +1176,6 @@
 	return -1;
 }
 
-#define LAST_OUT(x) if (output_byte(x)<0){ reset_fdc();return;}
-
 /* gets the response from the fdc */
 static int result(void)
 {
@@ -1208,14 +1183,13 @@
 	int status = 0;
 
 	for (i = 0; i < MAX_REPLIES; i++) {
-		if ((status = wait_til_ready()) < 0)
+		status = wait_til_ready();
+		if (status < 0)
 			break;
 		status &= STATUS_DIR | STATUS_READY | STATUS_BUSY | STATUS_DMA;
 		if ((status & ~STATUS_BUSY) == STATUS_READY) {
-#ifdef FLOPPY_SANITY_CHECK
 			resultjiffies = jiffies;
 			resultsize = i;
-#endif
 			return i;
 		}
 		if (status == (STATUS_DIR | STATUS_READY | STATUS_BUSY))
@@ -1223,10 +1197,9 @@
 		else
 			break;
 	}
-	if (!initialising) {
-		DPRINT
-		    ("get result error. Fdc=%d Last status=%x Read bytes=%d\n",
-		     fdc, status, i);
+	if (initialized) {
+		DPRINT("get result error. Fdc=%d Last status=%x Read bytes=%d\n",
+		       fdc, status, i);
 		show_floppy();
 	}
 	FDCS->reset = 1;
@@ -1237,12 +1210,14 @@
 /* does the fdc need more output? */
 static int need_more_output(void)
 {
-	int status;
+	int status = wait_til_ready();
 
-	if ((status = wait_til_ready()) < 0)
+	if (status < 0)
 		return -1;
-	if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY)
+
+	if (is_ready_state(status))
 		return MORE_OUTPUT;
+
 	return result();
 }
 
@@ -1264,9 +1239,12 @@
 		default:
 			DPRINT("Invalid data rate for perpendicular mode!\n");
 			cont->done(0);
-			FDCS->reset = 1;	/* convenient way to return to
-						 * redo without to much hassle (deep
-						 * stack et al. */
+			FDCS->reset = 1;
+					/*
+					 * convenient way to return to
+					 * redo without too much hassle
+					 * (deep stack et al.)
+					 */
 			return;
 		}
 	} else
@@ -1366,9 +1344,9 @@
 
 	/* Convert step rate from microseconds to milliseconds and 4 bits */
 	srt = 16 - DIV_ROUND_UP(DP->srt * scale_dtr / 1000, NOMINAL_DTR);
-	if (slow_floppy) {
+	if (slow_floppy)
 		srt = srt / 4;
-	}
+
 	SUPBOUND(srt, 0xf);
 	INFBOUND(srt, 0);
 
@@ -1415,16 +1393,46 @@
 	 * Pause 5 msec to avoid trouble. (Needs to be 2 jiffies)
 	 */
 	FDCS->dtr = raw_cmd->rate & 3;
-	return (fd_wait_for_completion(jiffies + 2UL * HZ / 100,
-				       (timeout_fn) floppy_ready));
+	return fd_wait_for_completion(jiffies + 2UL * HZ / 100,
+				      (timeout_fn)floppy_ready);
 }				/* fdc_dtr */
 
 static void tell_sector(void)
 {
-	printk(": track %d, head %d, sector %d, size %d",
-	       R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
+	pr_cont(": track %d, head %d, sector %d, size %d",
+		R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
 }				/* tell_sector */
 
+static void print_errors(void)
+{
+	DPRINT("");
+	if (ST0 & ST0_ECE) {
+		pr_cont("Recalibrate failed!");
+	} else if (ST2 & ST2_CRC) {
+		pr_cont("data CRC error");
+		tell_sector();
+	} else if (ST1 & ST1_CRC) {
+		pr_cont("CRC error");
+		tell_sector();
+	} else if ((ST1 & (ST1_MAM | ST1_ND)) ||
+		   (ST2 & ST2_MAM)) {
+		if (!probing) {
+			pr_cont("sector not found");
+			tell_sector();
+		} else
+			pr_cont("probe failed...");
+	} else if (ST2 & ST2_WC) {	/* seek error */
+		pr_cont("wrong cylinder");
+	} else if (ST2 & ST2_BC) {	/* cylinder marked as bad */
+		pr_cont("bad cylinder");
+	} else {
+		pr_cont("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
+			ST0, ST1, ST2);
+		tell_sector();
+	}
+	pr_cont("\n");
+}
+
 /*
  * OK, this error interpreting routine is called after a
  * DMA read/write has succeeded
@@ -1437,7 +1445,7 @@
 	char bad;
 
 	if (inr != 7) {
-		DPRINT("-- FDC reply error");
+		DPRINT("-- FDC reply error\n");
 		FDCS->reset = 1;
 		return 1;
 	}
@@ -1450,43 +1458,17 @@
 		bad = 1;
 		if (ST1 & ST1_WP) {
 			DPRINT("Drive is write protected\n");
-			CLEARF(FD_DISK_WRITABLE);
+			clear_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
 			cont->done(0);
 			bad = 2;
 		} else if (ST1 & ST1_ND) {
-			SETF(FD_NEED_TWADDLE);
+			set_bit(FD_NEED_TWADDLE_BIT, &DRS->flags);
 		} else if (ST1 & ST1_OR) {
 			if (DP->flags & FTD_MSG)
 				DPRINT("Over/Underrun - retrying\n");
 			bad = 0;
 		} else if (*errors >= DP->max_errors.reporting) {
-			DPRINT("");
-			if (ST0 & ST0_ECE) {
-				printk("Recalibrate failed!");
-			} else if (ST2 & ST2_CRC) {
-				printk("data CRC error");
-				tell_sector();
-			} else if (ST1 & ST1_CRC) {
-				printk("CRC error");
-				tell_sector();
-			} else if ((ST1 & (ST1_MAM | ST1_ND))
-				   || (ST2 & ST2_MAM)) {
-				if (!probing) {
-					printk("sector not found");
-					tell_sector();
-				} else
-					printk("probe failed...");
-			} else if (ST2 & ST2_WC) {	/* seek error */
-				printk("wrong cylinder");
-			} else if (ST2 & ST2_BC) {	/* cylinder marked as bad */
-				printk("bad cylinder");
-			} else {
-				printk
-				    ("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
-				     ST0, ST1, ST2);
-				tell_sector();
-			}
-			printk("\n");
+			print_errors();
 		}
 		if (ST2 & ST2_WC || ST2 & ST2_BC)
 			/* wrong cylinder => recal */
@@ -1531,9 +1513,9 @@
 		 */
 		if (time_after(ready_date, jiffies + DP->select_delay)) {
 			ready_date -= DP->select_delay;
-			function = (timeout_fn) floppy_start;
+			function = (timeout_fn)floppy_start;
 		} else
-			function = (timeout_fn) setup_rw_floppy;
+			function = (timeout_fn)setup_rw_floppy;
 
 		/* wait until the floppy is spinning fast enough */
 		if (fd_wait_for_completion(ready_date, function))
@@ -1551,7 +1533,7 @@
 	for (i = 0; i < raw_cmd->cmd_count; i++)
 		r |= output_byte(raw_cmd->cmd[i]);
 
-	debugt("rw_command: ");
+	debugt(__func__, "rw_command");
 
 	if (r) {
 		cont->error();
@@ -1574,7 +1556,7 @@
  */
 static void seek_interrupt(void)
 {
-	debugt("seek interrupt:");
+	debugt(__func__, "");
 	if (inr != 2 || (ST0 & 0xF8) != 0x20) {
 		DPRINT("seek failed\n");
 		DRS->track = NEED_2_RECAL;
@@ -1583,14 +1565,11 @@
 		return;
 	}
 	if (DRS->track >= 0 && DRS->track != ST1 && !blind_seek) {
-#ifdef DCL_DEBUG
-		if (DP->flags & FD_DEBUG) {
-			DPRINT
-			    ("clearing NEWCHANGE flag because of effective seek\n");
-			DPRINT("jiffies=%lu\n", jiffies);
-		}
-#endif
-		CLEARF(FD_DISK_NEWCHANGE);	/* effective seek */
+		debug_dcl(DP->flags,
+			  "clearing NEWCHANGE flag because of effective seek\n");
+		debug_dcl(DP->flags, "jiffies=%lu\n", jiffies);
+		clear_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
+					/* effective seek */
 		DRS->select_date = jiffies;
 	}
 	DRS->track = ST1;
@@ -1599,26 +1578,23 @@
 
 static void check_wp(void)
 {
-	if (TESTF(FD_VERIFY)) {
-		/* check write protection */
+	if (test_bit(FD_VERIFY_BIT, &DRS->flags)) {
+					/* check write protection */
 		output_byte(FD_GETSTATUS);
 		output_byte(UNIT(current_drive));
 		if (result() != 1) {
 			FDCS->reset = 1;
 			return;
 		}
-		CLEARF(FD_VERIFY);
-		CLEARF(FD_NEED_TWADDLE);
-#ifdef DCL_DEBUG
-		if (DP->flags & FD_DEBUG) {
-			DPRINT("checking whether disk is write protected\n");
-			DPRINT("wp=%x\n", ST3 & 0x40);
-		}
-#endif
+		clear_bit(FD_VERIFY_BIT, &DRS->flags);
+		clear_bit(FD_NEED_TWADDLE_BIT, &DRS->flags);
+		debug_dcl(DP->flags,
+			  "checking whether disk is write protected\n");
+		debug_dcl(DP->flags, "wp=%x\n", ST3 & 0x40);
 		if (!(ST3 & 0x40))
-			SETF(FD_DISK_WRITABLE);
+			set_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
 		else
-			CLEARF(FD_DISK_WRITABLE);
+			clear_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
 	}
 }
 
@@ -1628,19 +1604,15 @@
 
 	blind_seek = 0;
 
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("calling disk change from seek\n");
-	}
-#endif
+	debug_dcl(DP->flags, "calling disk change from %s\n", __func__);
 
-	if (!TESTF(FD_DISK_NEWCHANGE) &&
+	if (!test_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags) &&
 	    disk_change(current_drive) && (raw_cmd->flags & FD_RAW_NEED_DISK)) {
 		/* the media changed flag should be cleared after the seek.
 		 * If it isn't, this means that there is really no disk in
 		 * the drive.
 		 */
-		SETF(FD_DISK_CHANGED);
+		set_bit(FD_DISK_CHANGED_BIT, &DRS->flags);
 		cont->done(0);
 		cont->redo();
 		return;
@@ -1648,7 +1620,7 @@
 	if (DRS->track <= NEED_1_RECAL) {
 		recalibrate_floppy();
 		return;
-	} else if (TESTF(FD_DISK_NEWCHANGE) &&
+	} else if (test_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags) &&
 		   (raw_cmd->flags & FD_RAW_NEED_DISK) &&
 		   (DRS->track <= NO_TRACK || DRS->track == raw_cmd->track)) {
 		/* we seek to clear the media-changed condition. Does anybody
@@ -1677,19 +1649,22 @@
 	do_floppy = seek_interrupt;
 	output_byte(FD_SEEK);
 	output_byte(UNIT(current_drive));
-	LAST_OUT(track);
-	debugt("seek command:");
+	if (output_byte(track) < 0) {
+		reset_fdc();
+		return;
+	}
+	debugt(__func__, "");
 }
 
 static void recal_interrupt(void)
 {
-	debugt("recal interrupt:");
+	debugt(__func__, "");
 	if (inr != 2)
 		FDCS->reset = 1;
 	else if (ST0 & ST0_ECE) {
 		switch (DRS->track) {
 		case NEED_1_RECAL:
-			debugt("recal interrupt need 1 recal:");
+			debugt(__func__, "need 1 recal");
 			/* after a second recalibrate, we still haven't
 			 * reached track 0. Probably no drive. Raise an
 			 * error, as failing immediately might upset
@@ -1698,25 +1673,21 @@
 			cont->redo();
 			return;
 		case NEED_2_RECAL:
-			debugt("recal interrupt need 2 recal:");
+			debugt(__func__, "need 2 recal");
 			/* If we already did a recalibrate,
 			 * and we are not at track 0, this
 			 * means we have moved. (The only way
 			 * not to move at recalibration is to
 			 * be already at track 0.) Clear the
 			 * new change flag */
-#ifdef DCL_DEBUG
-			if (DP->flags & FD_DEBUG) {
-				DPRINT
-				    ("clearing NEWCHANGE flag because of second recalibrate\n");
-			}
-#endif
+			debug_dcl(DP->flags,
+				  "clearing NEWCHANGE flag because of second recalibrate\n");
 
-			CLEARF(FD_DISK_NEWCHANGE);
+			clear_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
 			DRS->select_date = jiffies;
 			/* fall through */
 		default:
-			debugt("recal interrupt default:");
+			debugt(__func__, "default");
 			/* Recalibrate moves the head by at
 			 * most 80 steps. If after one
 			 * recalibrate we don't have reached
@@ -1738,8 +1709,8 @@
 	DPRINT("%s ", message);
 	if (inr >= 0)
 		for (i = 0; i < inr; i++)
-			printk("repl[%d]=%x ", i, reply_buffer[i]);
-	printk("\n");
+			pr_cont("repl[%d]=%x ", i, reply_buffer[i]);
+	pr_cont("\n");
 }
 
 /* interrupt handler. Note that this can be called externally on the Sparc */
@@ -1760,10 +1731,10 @@
 	do_floppy = NULL;
 	if (fdc >= N_FDC || FDCS->address == -1) {
 		/* we don't even know which FDC is the culprit */
-		printk("DOR0=%x\n", fdc_state[0].dor);
-		printk("floppy interrupt on bizarre fdc %d\n", fdc);
-		printk("handler=%p\n", handler);
-		is_alive("bizarre fdc");
+		pr_info("DOR0=%x\n", fdc_state[0].dor);
+		pr_info("floppy interrupt on bizarre fdc %d\n", fdc);
+		pr_info("handler=%pf\n", handler);
+		is_alive(__func__, "bizarre fdc");
 		return IRQ_NONE;
 	}
 
@@ -1777,7 +1748,7 @@
 	 * activity.
 	 */
 
-	do_print = !handler && print_unex && !initialising;
+	do_print = !handler && print_unex && initialized;
 
 	inr = result();
 	if (do_print)
@@ -1790,15 +1761,15 @@
 			if (do_print)
 				print_result("sensei", inr);
 			max_sensei--;
-		} while ((ST0 & 0x83) != UNIT(current_drive) && inr == 2
-			 && max_sensei);
+		} while ((ST0 & 0x83) != UNIT(current_drive) &&
+			 inr == 2 && max_sensei);
 	}
 	if (!handler) {
 		FDCS->reset = 1;
 		return IRQ_NONE;
 	}
 	schedule_bh(handler);
-	is_alive("normal interrupt end");
+	is_alive(__func__, "normal interrupt end");
 
 	/* FIXME! Was it really for us? */
 	return IRQ_HANDLED;
@@ -1806,10 +1777,11 @@
 
 static void recalibrate_floppy(void)
 {
-	debugt("recalibrate floppy:");
+	debugt(__func__, "");
 	do_floppy = recal_interrupt;
 	output_byte(FD_RECALIBRATE);
-	LAST_OUT(UNIT(current_drive));
+	if (output_byte(UNIT(current_drive)) < 0)
+		reset_fdc();
 }
 
 /*
@@ -1817,10 +1789,10 @@
  */
 static void reset_interrupt(void)
 {
-	debugt("reset interrupt:");
+	debugt(__func__, "");
 	result();		/* get the status ready for set_fdc */
 	if (FDCS->reset) {
-		printk("reset set in interrupt, calling %p\n", cont->error);
+		pr_info("reset set in interrupt, calling %pf\n", cont->error);
 		cont->error();	/* a reset just after a reset. BAD! */
 	}
 	cont->redo();
@@ -1858,53 +1830,49 @@
 {
 	int i;
 
-	printk("\n");
-	printk("floppy driver state\n");
-	printk("-------------------\n");
-	printk("now=%lu last interrupt=%lu diff=%lu last called handler=%p\n",
-	       jiffies, interruptjiffies, jiffies - interruptjiffies,
-	       lasthandler);
+	pr_info("\n");
+	pr_info("floppy driver state\n");
+	pr_info("-------------------\n");
+	pr_info("now=%lu last interrupt=%lu diff=%lu last called handler=%pf\n",
+		jiffies, interruptjiffies, jiffies - interruptjiffies,
+		lasthandler);
 
-#ifdef FLOPPY_SANITY_CHECK
-	printk("timeout_message=%s\n", timeout_message);
-	printk("last output bytes:\n");
+	pr_info("timeout_message=%s\n", timeout_message);
+	pr_info("last output bytes:\n");
 	for (i = 0; i < OLOGSIZE; i++)
-		printk("%2x %2x %lu\n",
-		       output_log[(i + output_log_pos) % OLOGSIZE].data,
-		       output_log[(i + output_log_pos) % OLOGSIZE].status,
-		       output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
-	printk("last result at %lu\n", resultjiffies);
-	printk("last redo_fd_request at %lu\n", lastredo);
-	for (i = 0; i < resultsize; i++) {
-		printk("%2x ", reply_buffer[i]);
-	}
-	printk("\n");
-#endif
+		pr_info("%2x %2x %lu\n",
+			output_log[(i + output_log_pos) % OLOGSIZE].data,
+			output_log[(i + output_log_pos) % OLOGSIZE].status,
+			output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
+	pr_info("last result at %lu\n", resultjiffies);
+	pr_info("last redo_fd_request at %lu\n", lastredo);
+	print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1,
+		       reply_buffer, resultsize, true);
 
-	printk("status=%x\n", fd_inb(FD_STATUS));
-	printk("fdc_busy=%lu\n", fdc_busy);
+	pr_info("status=%x\n", fd_inb(FD_STATUS));
+	pr_info("fdc_busy=%lu\n", fdc_busy);
 	if (do_floppy)
-		printk("do_floppy=%p\n", do_floppy);
+		pr_info("do_floppy=%pf\n", do_floppy);
 	if (work_pending(&floppy_work))
-		printk("floppy_work.func=%p\n", floppy_work.func);
+		pr_info("floppy_work.func=%pf\n", floppy_work.func);
 	if (timer_pending(&fd_timer))
-		printk("fd_timer.function=%p\n", fd_timer.function);
+		pr_info("fd_timer.function=%pf\n", fd_timer.function);
 	if (timer_pending(&fd_timeout)) {
-		printk("timer_function=%p\n", fd_timeout.function);
-		printk("expires=%lu\n", fd_timeout.expires - jiffies);
-		printk("now=%lu\n", jiffies);
+		pr_info("timer_function=%pf\n", fd_timeout.function);
+		pr_info("expires=%lu\n", fd_timeout.expires - jiffies);
+		pr_info("now=%lu\n", jiffies);
 	}
-	printk("cont=%p\n", cont);
-	printk("current_req=%p\n", current_req);
-	printk("command_status=%d\n", command_status);
-	printk("\n");
+	pr_info("cont=%p\n", cont);
+	pr_info("current_req=%p\n", current_req);
+	pr_info("command_status=%d\n", command_status);
+	pr_info("\n");
 }
 
 static void floppy_shutdown(unsigned long data)
 {
 	unsigned long flags;
 
-	if (!initialising)
+	if (initialized)
 		show_floppy();
 	cancel_activity();
 
@@ -1916,17 +1884,17 @@
 
 	/* avoid dma going to a random drive after shutdown */
 
-	if (!initialising)
+	if (initialized)
 		DPRINT("floppy timeout called\n");
 	FDCS->reset = 1;
 	if (cont) {
 		cont->done(0);
 		cont->redo();	/* this will recall reset when needed */
 	} else {
-		printk("no cont in shutdown!\n");
+		pr_info("no cont in shutdown!\n");
 		process_fd_request();
 	}
-	is_alive("floppy shutdown");
+	is_alive(__func__, "");
 }
 
 /* start motor, check media-changed condition and write protection */
@@ -1954,27 +1922,26 @@
 	set_dor(fdc, mask, data);
 
 	/* wait_for_completion also schedules reset if needed. */
-	return (fd_wait_for_completion(DRS->select_date + DP->select_delay,
-				       (timeout_fn) function));
+	return fd_wait_for_completion(DRS->select_date + DP->select_delay,
+				      (timeout_fn)function);
 }
 
 static void floppy_ready(void)
 {
-	CHECK_RESET;
+	if (FDCS->reset) {
+		reset_fdc();
+		return;
+	}
 	if (start_motor(floppy_ready))
 		return;
 	if (fdc_dtr())
 		return;
 
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("calling disk change from floppy_ready\n");
-	}
-#endif
+	debug_dcl(DP->flags, "calling disk change from floppy_ready\n");
 	if (!(raw_cmd->flags & FD_RAW_NO_MOTOR) &&
 	    disk_change(current_drive) && !DP->select_delay)
-		twaddle();	/* this clears the dcl on certain drive/controller
-				 * combinations */
+		twaddle();	/* this clears the dcl on certain
+				 * drive/controller combinations */
 
 #ifdef fd_chose_dma_mode
 	if ((raw_cmd->flags & FD_RAW_READ) || (raw_cmd->flags & FD_RAW_WRITE)) {
@@ -1998,15 +1965,11 @@
 
 static void floppy_start(void)
 {
-	reschedule_timeout(current_reqD, "floppy start", 0);
+	reschedule_timeout(current_reqD, "floppy start");
 
 	scandrives();
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("setting NEWCHANGE in floppy_start\n");
-	}
-#endif
-	SETF(FD_DISK_NEWCHANGE);
+	debug_dcl(DP->flags, "setting NEWCHANGE in floppy_start\n");
+	set_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
 	floppy_ready();
 }
 
@@ -2026,7 +1989,7 @@
 
 static void do_wakeup(void)
 {
-	reschedule_timeout(MAXTIMEOUT, "do wakeup", 0);
+	reschedule_timeout(MAXTIMEOUT, "do wakeup");
 	cont = NULL;
 	command_status += 2;
 	wake_up(&command_done);
@@ -2046,7 +2009,7 @@
 	.done		= (done_f)empty
 };
 
-static int wait_til_done(void (*handler)(void), int interruptible)
+static int wait_til_done(void (*handler)(void), bool interruptible)
 {
 	int ret;
 
@@ -2064,7 +2027,7 @@
 			if (command_status >= 2 || !NO_SIGNAL)
 				break;
 
-			is_alive("wait_til_done");
+			is_alive(__func__, "");
 			schedule();
 		}
 
@@ -2180,9 +2143,9 @@
 	cont->redo();
 }
 
-#define CODE2SIZE (ssize = ((1 << SIZECODE) + 3) >> 2)
-#define FM_MODE(x,y) ((y) & ~(((x)->rate & 0x80) >>1))
+#define FM_MODE(x, y) ((y) & ~(((x)->rate & 0x80) >> 1))
 #define CT(x) ((x) | 0xc0)
+
 static void setup_format_params(int track)
 {
 	int n;
@@ -2197,8 +2160,8 @@
 	raw_cmd = &default_raw_cmd;
 	raw_cmd->track = track;
 
-	raw_cmd->flags = FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN |
-	    FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK;
+	raw_cmd->flags = (FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN |
+			  FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK);
 	raw_cmd->rate = _floppy->rate & 0x43;
 	raw_cmd->cmd_count = NR_F;
 	COMMAND = FM_MODE(_floppy, FD_FORMAT);
@@ -2257,7 +2220,7 @@
 	buffer_track = -1;
 	setup_format_params(format_req.track << STRETCH(_floppy));
 	floppy_start();
-	debugt("queue format request");
+	debugt(__func__, "queue format request");
 }
 
 static struct cont_t format_cont = {
@@ -2271,7 +2234,9 @@
 {
 	int ret;
 
-	LOCK_FDC(drive, 1);
+	if (lock_fdc(drive, true))
+		return -EINTR;
+
 	set_floppy(drive);
 	if (!_floppy ||
 	    _floppy->track > DP->tracks ||
@@ -2286,7 +2251,9 @@
 	format_errors = 0;
 	cont = &format_cont;
 	errors = &format_errors;
-	IWAIT(redo_format);
+	ret = wait_til_done(redo_format, true);
+	if (ret == -EINTR)
+		return -EINTR;
 	process_fd_request();
 	return ret;
 }
@@ -2320,12 +2287,14 @@
 	struct request *req = current_req;
 	unsigned long flags;
 	int block;
+	char msg[sizeof("request done ") + sizeof(int) * 3];
 
 	probing = 0;
-	reschedule_timeout(MAXTIMEOUT, "request done %d", uptodate);
+	snprintf(msg, sizeof(msg), "request done %d", uptodate);
+	reschedule_timeout(MAXTIMEOUT, msg);
 
 	if (!req) {
-		printk("floppy.c: no request in request_done\n");
+		pr_info("floppy.c: no request in request_done\n");
 		return;
 	}
 
@@ -2377,7 +2346,7 @@
 		DRS->first_read_date = jiffies;
 
 	nr_sectors = 0;
-	CODE2SIZE;
+	ssize = DIV_ROUND_UP(1 << SIZECODE, 4);
 
 	if (ST1 & ST1_EOC)
 		eoc = 1;
@@ -2393,20 +2362,18 @@
 		       R_HEAD - HEAD) * SECT_PER_TRACK +
 		      R_SECTOR - SECTOR + eoc) << SIZECODE >> 2;
 
-#ifdef FLOPPY_SANITY_CHECK
 	if (nr_sectors / ssize >
 	    DIV_ROUND_UP(in_sector_offset + current_count_sectors, ssize)) {
 		DPRINT("long rw: %x instead of %lx\n",
 		       nr_sectors, current_count_sectors);
-		printk("rs=%d s=%d\n", R_SECTOR, SECTOR);
-		printk("rh=%d h=%d\n", R_HEAD, HEAD);
-		printk("rt=%d t=%d\n", R_TRACK, TRACK);
-		printk("heads=%d eoc=%d\n", heads, eoc);
-		printk("spt=%d st=%d ss=%d\n", SECT_PER_TRACK,
-		       fsector_t, ssize);
-		printk("in_sector_offset=%d\n", in_sector_offset);
+		pr_info("rs=%d s=%d\n", R_SECTOR, SECTOR);
+		pr_info("rh=%d h=%d\n", R_HEAD, HEAD);
+		pr_info("rt=%d t=%d\n", R_TRACK, TRACK);
+		pr_info("heads=%d eoc=%d\n", heads, eoc);
+		pr_info("spt=%d st=%d ss=%d\n",
+			SECT_PER_TRACK, fsector_t, ssize);
+		pr_info("in_sector_offset=%d\n", in_sector_offset);
 	}
-#endif
 
 	nr_sectors -= in_sector_offset;
 	INFBOUND(nr_sectors, 0);
@@ -2511,19 +2478,17 @@
 					      blk_rq_sectors(current_req));
 
 	remaining = current_count_sectors << 9;
-#ifdef FLOPPY_SANITY_CHECK
 	if (remaining > blk_rq_bytes(current_req) && CT(COMMAND) == FD_WRITE) {
 		DPRINT("in copy buffer\n");
-		printk("current_count_sectors=%ld\n", current_count_sectors);
-		printk("remaining=%d\n", remaining >> 9);
-		printk("current_req->nr_sectors=%u\n",
-		       blk_rq_sectors(current_req));
-		printk("current_req->current_nr_sectors=%u\n",
-		       blk_rq_cur_sectors(current_req));
-		printk("max_sector=%d\n", max_sector);
-		printk("ssize=%d\n", ssize);
+		pr_info("current_count_sectors=%ld\n", current_count_sectors);
+		pr_info("remaining=%d\n", remaining >> 9);
+		pr_info("current_req->nr_sectors=%u\n",
+			blk_rq_sectors(current_req));
+		pr_info("current_req->current_nr_sectors=%u\n",
+			blk_rq_cur_sectors(current_req));
+		pr_info("max_sector=%d\n", max_sector);
+		pr_info("ssize=%d\n", ssize);
 	}
-#endif
 
 	buffer_max = max(max_sector, buffer_max);
 
@@ -2539,26 +2504,24 @@
 		SUPBOUND(size, remaining);
 
 		buffer = page_address(bv->bv_page) + bv->bv_offset;
-#ifdef FLOPPY_SANITY_CHECK
 		if (dma_buffer + size >
 		    floppy_track_buffer + (max_buffer_sectors << 10) ||
 		    dma_buffer < floppy_track_buffer) {
 			DPRINT("buffer overrun in copy buffer %d\n",
-			       (int)((floppy_track_buffer -
-				      dma_buffer) >> 9));
-			printk("fsector_t=%d buffer_min=%d\n",
-			       fsector_t, buffer_min);
-			printk("current_count_sectors=%ld\n",
-			       current_count_sectors);
+			       (int)((floppy_track_buffer - dma_buffer) >> 9));
+			pr_info("fsector_t=%d buffer_min=%d\n",
+				fsector_t, buffer_min);
+			pr_info("current_count_sectors=%ld\n",
+				current_count_sectors);
 			if (CT(COMMAND) == FD_READ)
-				printk("read\n");
+				pr_info("read\n");
 			if (CT(COMMAND) == FD_WRITE)
-				printk("write\n");
+				pr_info("write\n");
 			break;
 		}
 		if (((unsigned long)buffer) % 512)
 			DPRINT("%p buffer not aligned\n", buffer);
-#endif
+
 		if (CT(COMMAND) == FD_READ)
 			memcpy(buffer, dma_buffer, size);
 		else
@@ -2567,13 +2530,11 @@
 		remaining -= size;
 		dma_buffer += size;
 	}
-#ifdef FLOPPY_SANITY_CHECK
 	if (remaining) {
 		if (remaining > 0)
 			max_sector -= remaining >> 9;
 		DPRINT("weirdness: remaining %d\n", remaining >> 9);
 	}
-#endif
 }
 
 /* work around a bug in pseudo DMA
@@ -2593,15 +2554,14 @@
 
 		hard_sectors = raw_cmd->length >> (7 + SIZECODE);
 		end_sector = SECTOR + hard_sectors - 1;
-#ifdef FLOPPY_SANITY_CHECK
 		if (end_sector > SECT_PER_TRACK) {
-			printk("too many sectors %d > %d\n",
-			       end_sector, SECT_PER_TRACK);
+			pr_info("too many sectors %d > %d\n",
+				end_sector, SECT_PER_TRACK);
 			return;
 		}
-#endif
-		SECT_PER_TRACK = end_sector;	/* make sure SECT_PER_TRACK points
-						 * to end of transfer */
+		SECT_PER_TRACK = end_sector;
+					/* make sure SECT_PER_TRACK
+					 * points to end of transfer */
 	}
 }
 
@@ -2624,7 +2584,7 @@
 	int ssize;
 
 	if (max_buffer_sectors == 0) {
-		printk("VFS: Block I/O scheduled on unopened device\n");
+		pr_info("VFS: Block I/O scheduled on unopened device\n");
 		return 0;
 	}
 
@@ -2641,7 +2601,7 @@
 		raw_cmd->flags |= FD_RAW_WRITE;
 		COMMAND = FM_MODE(_floppy, FD_WRITE);
 	} else {
-		DPRINT("make_raw_rw_request: unknown command\n");
+		DPRINT("%s: unknown command\n", __func__);
 		return 0;
 	}
 
@@ -2659,7 +2619,8 @@
 	HEAD = fsector_t / _floppy->sect;
 
 	if (((_floppy->stretch & (FD_SWAPSIDES | FD_SECTBASEMASK)) ||
-	     TESTF(FD_NEED_TWADDLE)) && fsector_t < _floppy->sect)
+	     test_bit(FD_NEED_TWADDLE_BIT, &DRS->flags)) &&
+	    fsector_t < _floppy->sect)
 		max_sector = _floppy->sect;
 
 	/* 2M disks have phantom sectors on the first track */
@@ -2685,7 +2646,7 @@
 	raw_cmd->track = TRACK << STRETCH(_floppy);
 	DR_SELECT = UNIT(current_drive) + PH_HEAD(_floppy, HEAD);
 	GAP = _floppy->gap;
-	CODE2SIZE;
+	ssize = DIV_ROUND_UP(1 << SIZECODE, 4);
 	SECT_PER_TRACK = _floppy->sect << 2 >> SIZECODE;
 	SECTOR = ((fsector_t % _floppy->sect) << 2 >> SIZECODE) +
 	    FD_SECTBASE(_floppy);
@@ -2730,8 +2691,10 @@
 		}
 	} else if (in_sector_offset || blk_rq_sectors(current_req) < ssize) {
 		if (CT(COMMAND) == FD_WRITE) {
-			if (fsector_t + blk_rq_sectors(current_req) > ssize &&
-			    fsector_t + blk_rq_sectors(current_req) < ssize + ssize)
+			unsigned int sectors;
+
+			sectors = fsector_t + blk_rq_sectors(current_req);
+			if (sectors > ssize && sectors < ssize + ssize)
 				max_size = ssize + ssize;
 			else
 				max_size = ssize;
@@ -2752,12 +2715,10 @@
 		 * on a 64 bit machine!
 		 */
 		max_size = buffer_chain_size();
-		dma_limit =
-		    (MAX_DMA_ADDRESS -
-		     ((unsigned long)current_req->buffer)) >> 9;
-		if ((unsigned long)max_size > dma_limit) {
+		dma_limit = (MAX_DMA_ADDRESS -
+			     ((unsigned long)current_req->buffer)) >> 9;
+		if ((unsigned long)max_size > dma_limit)
 			max_size = dma_limit;
-		}
 		/* 64 kb boundaries */
 		if (CROSS_64KB(current_req->buffer, max_size << 9))
 			max_size = (K_64 -
@@ -2773,16 +2734,16 @@
 		 */
 		if (!direct ||
 		    (indirect * 2 > direct * 3 &&
-		     *errors < DP->max_errors.read_track && ((!probing
-		       || (DP->read_track & (1 << DRS->probed_format)))))) {
+		     *errors < DP->max_errors.read_track &&
+		     ((!probing ||
+		       (DP->read_track & (1 << DRS->probed_format)))))) {
 			max_size = blk_rq_sectors(current_req);
 		} else {
 			raw_cmd->kernel_data = current_req->buffer;
 			raw_cmd->length = current_count_sectors << 9;
 			if (raw_cmd->length == 0) {
-				DPRINT
-				    ("zero dma transfer attempted from make_raw_request\n");
-				DPRINT("indirect=%d direct=%d fsector_t=%d",
+				DPRINT("%s: zero dma transfer attempted\n", __func__);
+				DPRINT("indirect=%d direct=%d fsector_t=%d\n",
 				       indirect, direct, fsector_t);
 				return 0;
 			}
@@ -2802,25 +2763,22 @@
 	    ((CT(COMMAND) == FD_READ ||
 	      (!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) &&
 	     max_sector > 2 * max_buffer_sectors + buffer_min &&
-	     max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)
-	    /* not enough space */
-	    ) {
+	     max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)) {
+		/* not enough space */
 		buffer_track = -1;
 		buffer_drive = current_drive;
 		buffer_max = buffer_min = aligned_sector_t;
 	}
 	raw_cmd->kernel_data = floppy_track_buffer +
-	    ((aligned_sector_t - buffer_min) << 9);
+		((aligned_sector_t - buffer_min) << 9);
 
 	if (CT(COMMAND) == FD_WRITE) {
 		/* copy write buffer to track buffer.
 		 * if we get here, we know that the write
 		 * is either aligned or the data already in the buffer
 		 * (buffer will be overwritten) */
-#ifdef FLOPPY_SANITY_CHECK
 		if (in_sector_offset && buffer_track == -1)
 			DPRINT("internal error offset !=0 on write\n");
-#endif
 		buffer_track = raw_cmd->track;
 		buffer_drive = current_drive;
 		copy_buffer(ssize, max_sector,
@@ -2834,7 +2792,6 @@
 	raw_cmd->length = in_sector_offset + current_count_sectors;
 	raw_cmd->length = ((raw_cmd->length - 1) | (ssize - 1)) + 1;
 	raw_cmd->length <<= 9;
-#ifdef FLOPPY_SANITY_CHECK
 	if ((raw_cmd->length < current_count_sectors << 9) ||
 	    (raw_cmd->kernel_data != current_req->buffer &&
 	     CT(COMMAND) == FD_WRITE &&
@@ -2845,19 +2802,19 @@
 		DPRINT("fractionary current count b=%lx s=%lx\n",
 		       raw_cmd->length, current_count_sectors);
 		if (raw_cmd->kernel_data != current_req->buffer)
-			printk("addr=%d, length=%ld\n",
-			       (int)((raw_cmd->kernel_data -
-				      floppy_track_buffer) >> 9),
-			       current_count_sectors);
-		printk("st=%d ast=%d mse=%d msi=%d\n",
-		       fsector_t, aligned_sector_t, max_sector, max_size);
-		printk("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
-		printk("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
-		       COMMAND, SECTOR, HEAD, TRACK);
-		printk("buffer drive=%d\n", buffer_drive);
-		printk("buffer track=%d\n", buffer_track);
-		printk("buffer_min=%d\n", buffer_min);
-		printk("buffer_max=%d\n", buffer_max);
+			pr_info("addr=%d, length=%ld\n",
+				(int)((raw_cmd->kernel_data -
+				       floppy_track_buffer) >> 9),
+				current_count_sectors);
+		pr_info("st=%d ast=%d mse=%d msi=%d\n",
+			fsector_t, aligned_sector_t, max_sector, max_size);
+		pr_info("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
+		pr_info("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
+			COMMAND, SECTOR, HEAD, TRACK);
+		pr_info("buffer drive=%d\n", buffer_drive);
+		pr_info("buffer track=%d\n", buffer_track);
+		pr_info("buffer_min=%d\n", buffer_min);
+		pr_info("buffer_max=%d\n", buffer_max);
 		return 0;
 	}
 
@@ -2868,14 +2825,14 @@
 		    raw_cmd->kernel_data + raw_cmd->length >
 		    floppy_track_buffer + (max_buffer_sectors << 10)) {
 			DPRINT("buffer overrun in schedule dma\n");
-			printk("fsector_t=%d buffer_min=%d current_count=%ld\n",
-			       fsector_t, buffer_min, raw_cmd->length >> 9);
-			printk("current_count_sectors=%ld\n",
-			       current_count_sectors);
+			pr_info("fsector_t=%d buffer_min=%d current_count=%ld\n",
+				fsector_t, buffer_min, raw_cmd->length >> 9);
+			pr_info("current_count_sectors=%ld\n",
+				current_count_sectors);
 			if (CT(COMMAND) == FD_READ)
-				printk("read\n");
+				pr_info("read\n");
 			if (CT(COMMAND) == FD_WRITE)
-				printk("write\n");
+				pr_info("write\n");
 			return 0;
 		}
 	} else if (raw_cmd->length > blk_rq_bytes(current_req) ||
@@ -2884,14 +2841,13 @@
 		return 0;
 	} else if (raw_cmd->length < current_count_sectors << 9) {
 		DPRINT("more sectors than bytes\n");
-		printk("bytes=%ld\n", raw_cmd->length >> 9);
-		printk("sectors=%ld\n", current_count_sectors);
+		pr_info("bytes=%ld\n", raw_cmd->length >> 9);
+		pr_info("sectors=%ld\n", current_count_sectors);
 	}
 	if (raw_cmd->length == 0) {
 		DPRINT("zero dma transfer attempted from make_raw_request\n");
 		return 0;
 	}
-#endif
 
 	virtualdmabug_workaround();
 	return 2;
@@ -2899,7 +2855,6 @@
 
 static void redo_fd_request(void)
 {
-#define REPEAT {request_done(0); continue; }
 	int drive;
 	int tmp;
 
@@ -2907,63 +2862,63 @@
 	if (current_drive < N_DRIVE)
 		floppy_off(current_drive);
 
-	for (;;) {
-		if (!current_req) {
-			struct request *req;
+do_request:
+	if (!current_req) {
+		struct request *req;
 
-			spin_lock_irq(floppy_queue->queue_lock);
-			req = blk_fetch_request(floppy_queue);
-			spin_unlock_irq(floppy_queue->queue_lock);
-			if (!req) {
-				do_floppy = NULL;
-				unlock_fdc();
-				return;
-			}
-			current_req = req;
-		}
-		drive = (long)current_req->rq_disk->private_data;
-		set_fdc(drive);
-		reschedule_timeout(current_reqD, "redo fd request", 0);
-
-		set_floppy(drive);
-		raw_cmd = &default_raw_cmd;
-		raw_cmd->flags = 0;
-		if (start_motor(redo_fd_request))
+		spin_lock_irq(floppy_queue->queue_lock);
+		req = blk_fetch_request(floppy_queue);
+		spin_unlock_irq(floppy_queue->queue_lock);
+		if (!req) {
+			do_floppy = NULL;
+			unlock_fdc();
 			return;
-		disk_change(current_drive);
-		if (test_bit(current_drive, &fake_change) ||
-		    TESTF(FD_DISK_CHANGED)) {
-			DPRINT("disk absent or changed during operation\n");
-			REPEAT;
 		}
-		if (!_floppy) {	/* Autodetection */
-			if (!probing) {
-				DRS->probed_format = 0;
-				if (next_valid_format()) {
-					DPRINT("no autodetectable formats\n");
-					_floppy = NULL;
-					REPEAT;
-				}
-			}
-			probing = 1;
-			_floppy =
-			    floppy_type + DP->autodetect[DRS->probed_format];
-		} else
-			probing = 0;
-		errors = &(current_req->errors);
-		tmp = make_raw_rw_request();
-		if (tmp < 2) {
-			request_done(tmp);
-			continue;
-		}
-
-		if (TESTF(FD_NEED_TWADDLE))
-			twaddle();
-		schedule_bh(floppy_start);
-		debugt("queue fd request");
-		return;
+		current_req = req;
 	}
-#undef REPEAT
+	drive = (long)current_req->rq_disk->private_data;
+	set_fdc(drive);
+	reschedule_timeout(current_reqD, "redo fd request");
+
+	set_floppy(drive);
+	raw_cmd = &default_raw_cmd;
+	raw_cmd->flags = 0;
+	if (start_motor(redo_fd_request))
+		return;
+
+	disk_change(current_drive);
+	if (test_bit(current_drive, &fake_change) ||
+	    test_bit(FD_DISK_CHANGED_BIT, &DRS->flags)) {
+		DPRINT("disk absent or changed during operation\n");
+		request_done(0);
+		goto do_request;
+	}
+	if (!_floppy) {	/* Autodetection */
+		if (!probing) {
+			DRS->probed_format = 0;
+			if (next_valid_format()) {
+				DPRINT("no autodetectable formats\n");
+				_floppy = NULL;
+				request_done(0);
+				goto do_request;
+			}
+		}
+		probing = 1;
+		_floppy = floppy_type + DP->autodetect[DRS->probed_format];
+	} else
+		probing = 0;
+	errors = &(current_req->errors);
+	tmp = make_raw_rw_request();
+	if (tmp < 2) {
+		request_done(tmp);
+		goto do_request;
+	}
+
+	if (test_bit(FD_NEED_TWADDLE_BIT, &DRS->flags))
+		twaddle();
+	schedule_bh(floppy_start);
+	debugt(__func__, "queue fd request");
+	return;
 }
 
 static struct cont_t rw_cont = {
@@ -2979,30 +2934,30 @@
 	schedule_bh(redo_fd_request);
 }
 
-static void do_fd_request(struct request_queue * q)
+static void do_fd_request(struct request_queue *q)
 {
 	if (max_buffer_sectors == 0) {
-		printk("VFS: do_fd_request called on non-open device\n");
+		pr_info("VFS: %s called on non-open device\n", __func__);
 		return;
 	}
 
 	if (usage_count == 0) {
-		printk("warning: usage count=0, current_req=%p exiting\n",
-		       current_req);
-		printk("sect=%ld type=%x flags=%x\n",
-		       (long)blk_rq_pos(current_req), current_req->cmd_type,
-		       current_req->cmd_flags);
+		pr_info("warning: usage count=0, current_req=%p exiting\n",
+			current_req);
+		pr_info("sect=%ld type=%x flags=%x\n",
+			(long)blk_rq_pos(current_req), current_req->cmd_type,
+			current_req->cmd_flags);
 		return;
 	}
 	if (test_bit(0, &fdc_busy)) {
 		/* fdc busy, this new request will be treated when the
 		   current one is done */
-		is_alive("do fd request, old request running");
+		is_alive(__func__, "old request running");
 		return;
 	}
-	lock_fdc(MAXTIMEOUT, 0);
+	lock_fdc(MAXTIMEOUT, false);
 	process_fd_request();
-	is_alive("do fd request");
+	is_alive(__func__, "");
 }
 
 static struct cont_t poll_cont = {
@@ -3012,24 +2967,18 @@
 	.done		= generic_done
 };
 
-static int poll_drive(int interruptible, int flag)
+static int poll_drive(bool interruptible, int flag)
 {
-	int ret;
-
 	/* no auto-sense, just clear dcl */
 	raw_cmd = &default_raw_cmd;
 	raw_cmd->flags = flag;
 	raw_cmd->track = 0;
 	raw_cmd->cmd_count = 0;
 	cont = &poll_cont;
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("setting NEWCHANGE in poll_drive\n");
-	}
-#endif
-	SETF(FD_DISK_NEWCHANGE);
-	WAIT(floppy_ready);
-	return ret;
+	debug_dcl(DP->flags, "setting NEWCHANGE in poll_drive\n");
+	set_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
+
+	return wait_til_done(floppy_ready, interruptible);
 }
 
 /*
@@ -3039,7 +2988,7 @@
 
 static void reset_intr(void)
 {
-	printk("weird, reset interrupt called\n");
+	pr_info("weird, reset interrupt called\n");
 }
 
 static struct cont_t reset_cont = {
@@ -3049,20 +2998,23 @@
 	.done		= generic_done
 };
 
-static int user_reset_fdc(int drive, int arg, int interruptible)
+static int user_reset_fdc(int drive, int arg, bool interruptible)
 {
 	int ret;
 
-	ret = 0;
-	LOCK_FDC(drive, interruptible);
+	if (lock_fdc(drive, interruptible))
+		return -EINTR;
+
 	if (arg == FD_RESET_ALWAYS)
 		FDCS->reset = 1;
 	if (FDCS->reset) {
 		cont = &reset_cont;
-		WAIT(reset_fdc);
+		ret = wait_til_done(reset_fdc, interruptible);
+		if (ret == -EINTR)
+			return -EINTR;
 	}
 	process_fd_request();
-	return ret;
+	return 0;
 }
 
 /*
@@ -3075,17 +3027,12 @@
 	return copy_to_user(param, address, size) ? -EFAULT : 0;
 }
 
-static inline int fd_copyin(void __user *param, void *address, unsigned long size)
+static inline int fd_copyin(void __user *param, void *address,
+			    unsigned long size)
 {
 	return copy_from_user(address, param, size) ? -EFAULT : 0;
 }
 
-#define _COPYOUT(x) (copy_to_user((void __user *)param, &(x), sizeof(x)) ? -EFAULT : 0)
-#define _COPYIN(x) (copy_from_user(&(x), (void __user *)param, sizeof(x)) ? -EFAULT : 0)
-
-#define COPYOUT(x) ECALL(_COPYOUT(x))
-#define COPYIN(x) ECALL(_COPYIN(x))
-
 static inline const char *drive_name(int type, int drive)
 {
 	struct floppy_struct *floppy;
@@ -3156,23 +3103,29 @@
 	.done		= raw_cmd_done
 };
 
-static inline int raw_cmd_copyout(int cmd, char __user *param,
+static inline int raw_cmd_copyout(int cmd, void __user *param,
 				  struct floppy_raw_cmd *ptr)
 {
 	int ret;
 
 	while (ptr) {
-		COPYOUT(*ptr);
+		ret = copy_to_user(param, ptr, sizeof(*ptr));
+		if (ret)
+			return -EFAULT;
 		param += sizeof(struct floppy_raw_cmd);
 		if ((ptr->flags & FD_RAW_READ) && ptr->buffer_length) {
-			if (ptr->length >= 0
-			    && ptr->length <= ptr->buffer_length)
-				ECALL(fd_copyout
-				      (ptr->data, ptr->kernel_data,
-				       ptr->buffer_length - ptr->length));
+			if (ptr->length >= 0 &&
+			    ptr->length <= ptr->buffer_length) {
+				long length = ptr->buffer_length - ptr->length;
+				ret = fd_copyout(ptr->data, ptr->kernel_data,
+						 length);
+				if (ret)
+					return ret;
+			}
 		}
 		ptr = ptr->next;
 	}
+
 	return 0;
 }
 
@@ -3195,7 +3148,7 @@
 	}
 }
 
-static inline int raw_cmd_copyin(int cmd, char __user *param,
+static inline int raw_cmd_copyin(int cmd, void __user *param,
 				 struct floppy_raw_cmd **rcmd)
 {
 	struct floppy_raw_cmd *ptr;
@@ -3203,17 +3156,19 @@
 	int i;
 
 	*rcmd = NULL;
-	while (1) {
-		ptr = (struct floppy_raw_cmd *)
-		    kmalloc(sizeof(struct floppy_raw_cmd), GFP_USER);
-		if (!ptr)
-			return -ENOMEM;
-		*rcmd = ptr;
-		COPYIN(*ptr);
-		ptr->next = NULL;
-		ptr->buffer_length = 0;
-		param += sizeof(struct floppy_raw_cmd);
-		if (ptr->cmd_count > 33)
+
+loop:
+	ptr = kmalloc(sizeof(struct floppy_raw_cmd), GFP_USER);
+	if (!ptr)
+		return -ENOMEM;
+	*rcmd = ptr;
+	ret = copy_from_user(ptr, param, sizeof(*ptr));
+	if (ret)
+		return -EFAULT;
+	ptr->next = NULL;
+	ptr->buffer_length = 0;
+	param += sizeof(struct floppy_raw_cmd);
+	if (ptr->cmd_count > 33)
 			/* the command may now also take up the space
 			 * initially intended for the reply & the
 			 * reply count. Needed for long 82078 commands
@@ -3222,31 +3177,35 @@
 			 * 16 bytes for a structure, you'll one day
 			 * discover that you really need 17...
 			 */
+		return -EINVAL;
+
+	for (i = 0; i < 16; i++)
+		ptr->reply[i] = 0;
+	ptr->resultcode = 0;
+	ptr->kernel_data = NULL;
+
+	if (ptr->flags & (FD_RAW_READ | FD_RAW_WRITE)) {
+		if (ptr->length <= 0)
 			return -EINVAL;
-
-		for (i = 0; i < 16; i++)
-			ptr->reply[i] = 0;
-		ptr->resultcode = 0;
-		ptr->kernel_data = NULL;
-
-		if (ptr->flags & (FD_RAW_READ | FD_RAW_WRITE)) {
-			if (ptr->length <= 0)
-				return -EINVAL;
-			ptr->kernel_data =
-			    (char *)fd_dma_mem_alloc(ptr->length);
-			fallback_on_nodma_alloc(&ptr->kernel_data, ptr->length);
-			if (!ptr->kernel_data)
-				return -ENOMEM;
-			ptr->buffer_length = ptr->length;
-		}
-		if (ptr->flags & FD_RAW_WRITE)
-			ECALL(fd_copyin(ptr->data, ptr->kernel_data,
-					ptr->length));
-		rcmd = &(ptr->next);
-		if (!(ptr->flags & FD_RAW_MORE))
-			return 0;
-		ptr->rate &= 0x43;
+		ptr->kernel_data = (char *)fd_dma_mem_alloc(ptr->length);
+		fallback_on_nodma_alloc(&ptr->kernel_data, ptr->length);
+		if (!ptr->kernel_data)
+			return -ENOMEM;
+		ptr->buffer_length = ptr->length;
 	}
+	if (ptr->flags & FD_RAW_WRITE) {
+		ret = fd_copyin(ptr->data, ptr->kernel_data, ptr->length);
+		if (ret)
+			return ret;
+	}
+
+	if (ptr->flags & FD_RAW_MORE) {
+		rcmd = &(ptr->next);
+		ptr->rate &= 0x43;
+		goto loop;
+	}
+
+	return 0;
 }
 
 static int raw_cmd_ioctl(int cmd, void __user *param)
@@ -3283,12 +3242,8 @@
 
 	raw_cmd = my_raw_cmd;
 	cont = &raw_cmd_cont;
-	ret = wait_til_done(floppy_start, 1);
-#ifdef DCL_DEBUG
-	if (DP->flags & FD_DEBUG) {
-		DPRINT("calling disk change from raw_cmd ioctl\n");
-	}
-#endif
+	ret = wait_til_done(floppy_start, true);
+	debug_dcl(DP->flags, "calling disk change from raw_cmd ioctl\n");
 
 	if (ret != -EINTR && FDCS->reset)
 		ret = -EIO;
@@ -3327,7 +3282,7 @@
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
 		mutex_lock(&open_lock);
-		if (lock_fdc(drive, 1)) {
+		if (lock_fdc(drive, true)) {
 			mutex_unlock(&open_lock);
 			return -EINTR;
 		}
@@ -3346,11 +3301,15 @@
 		mutex_unlock(&open_lock);
 	} else {
 		int oldStretch;
-		LOCK_FDC(drive, 1);
-		if (cmd != FDDEFPRM)
+
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		if (cmd != FDDEFPRM) {
 			/* notice a disk change immediately, else
 			 * we lose our settings immediately*/
-			CALL(poll_drive(1, FD_RAW_NEED_DISK));
+			if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR)
+				return -EINTR;
+		}
 		oldStretch = g->stretch;
 		user_params[drive] = *g;
 		if (buffer_drive == drive)
@@ -3415,7 +3374,7 @@
 			*size = _IOC_SIZE(*cmd);
 			*cmd = ioctl_table[i];
 			if (*size > _IOC_SIZE(*cmd)) {
-				printk("ioctl not yet supported\n");
+				pr_info("ioctl not yet supported\n");
 				return -EFAULT;
 			}
 			return 0;
@@ -3429,8 +3388,10 @@
 	if (type)
 		*g = &floppy_type[type];
 	else {
-		LOCK_FDC(drive, 0);
-		CALL(poll_drive(0, 0));
+		if (lock_fdc(drive, false))
+			return -EINTR;
+		if (poll_drive(false, 0) == -EINTR)
+			return -EINTR;
 		process_fd_request();
 		*g = current_type[drive];
 	}
@@ -3459,10 +3420,6 @@
 static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
 		    unsigned long param)
 {
-#define FD_IOCTL_ALLOWED (mode & (FMODE_WRITE|FMODE_WRITE_IOCTL))
-#define OUT(c,x) case c: outparam = (const char *) (x); break
-#define IN(c,x,tag) case c: *(x) = inparam. tag ; return 0
-
 	int drive = (long)bdev->bd_disk->private_data;
 	int type = ITYPE(UDRS->fd_device);
 	int i;
@@ -3474,26 +3431,28 @@
 		struct floppy_max_errors max_errors;
 		struct floppy_drive_params dp;
 	} inparam;		/* parameters coming from user space */
-	const char *outparam;	/* parameters passed back to user space */
+	const void *outparam;	/* parameters passed back to user space */
 
 	/* convert compatibility eject ioctls into floppy eject ioctl.
 	 * We do this in order to provide a means to eject floppy disks before
 	 * installing the new fdutils package */
 	if (cmd == CDROMEJECT ||	/* CD-ROM eject */
-	    cmd == 0x6470 /* SunOS floppy eject */ ) {
+	    cmd == 0x6470) {		/* SunOS floppy eject */
 		DPRINT("obsolete eject ioctl\n");
 		DPRINT("please use floppycontrol --eject\n");
 		cmd = FDEJECT;
 	}
 
-	/* convert the old style command into a new style command */
-	if ((cmd & 0xff00) == 0x0200) {
-		ECALL(normalize_ioctl(&cmd, &size));
-	} else
+	if (!((cmd & 0xff00) == 0x0200))
 		return -EINVAL;
 
+	/* convert the old style command into a new style command */
+	ret = normalize_ioctl(&cmd, &size);
+	if (ret)
+		return ret;
+
 	/* permission checks */
-	if (((cmd & 0x40) && !FD_IOCTL_ALLOWED) ||
+	if (((cmd & 0x40) && !(mode & (FMODE_WRITE | FMODE_WRITE_IOCTL))) ||
 	    ((cmd & 0x80) && !capable(CAP_SYS_ADMIN)))
 		return -EPERM;
 
@@ -3501,129 +3460,142 @@
 		return -EINVAL;
 
 	/* copyin */
-	CLEARSTRUCT(&inparam);
-	if (_IOC_DIR(cmd) & _IOC_WRITE)
-	    ECALL(fd_copyin((void __user *)param, &inparam, size))
-
-		switch (cmd) {
-		case FDEJECT:
-			if (UDRS->fd_ref != 1)
-				/* somebody else has this drive open */
-				return -EBUSY;
-			LOCK_FDC(drive, 1);
-
-			/* do the actual eject. Fails on
-			 * non-Sparc architectures */
-			ret = fd_eject(UNIT(drive));
-
-			USETF(FD_DISK_CHANGED);
-			USETF(FD_VERIFY);
-			process_fd_request();
+	memset(&inparam, 0, sizeof(inparam));
+	if (_IOC_DIR(cmd) & _IOC_WRITE) {
+		ret = fd_copyin((void __user *)param, &inparam, size);
+		if (ret)
 			return ret;
-		case FDCLRPRM:
-			LOCK_FDC(drive, 1);
-			current_type[drive] = NULL;
-			floppy_sizes[drive] = MAX_DISK_SIZE << 1;
-			UDRS->keep_data = 0;
-			return invalidate_drive(bdev);
-		case FDSETPRM:
-		case FDDEFPRM:
-			return set_geometry(cmd, &inparam.g,
-					    drive, type, bdev);
-		case FDGETPRM:
-			ECALL(get_floppy_geometry(drive, type,
-						  (struct floppy_struct **)
-						  &outparam));
-			break;
+	}
 
-		case FDMSGON:
-			UDP->flags |= FTD_MSG;
-			return 0;
-		case FDMSGOFF:
-			UDP->flags &= ~FTD_MSG;
-			return 0;
+	switch (cmd) {
+	case FDEJECT:
+		if (UDRS->fd_ref != 1)
+			/* somebody else has this drive open */
+			return -EBUSY;
+		if (lock_fdc(drive, true))
+			return -EINTR;
 
-		case FDFMTBEG:
-			LOCK_FDC(drive, 1);
-			CALL(poll_drive(1, FD_RAW_NEED_DISK));
-			ret = UDRS->flags;
-			process_fd_request();
-			if (ret & FD_VERIFY)
-				return -ENODEV;
-			if (!(ret & FD_DISK_WRITABLE))
-				return -EROFS;
-			return 0;
-		case FDFMTTRK:
-			if (UDRS->fd_ref != 1)
-				return -EBUSY;
-			return do_format(drive, &inparam.f);
-		case FDFMTEND:
-		case FDFLUSH:
-			LOCK_FDC(drive, 1);
-			return invalidate_drive(bdev);
+		/* do the actual eject. Fails on
+		 * non-Sparc architectures */
+		ret = fd_eject(UNIT(drive));
 
-		case FDSETEMSGTRESH:
-			UDP->max_errors.reporting =
-			    (unsigned short)(param & 0x0f);
-			return 0;
-			OUT(FDGETMAXERRS, &UDP->max_errors);
-			IN(FDSETMAXERRS, &UDP->max_errors, max_errors);
-
-		case FDGETDRVTYP:
-			outparam = drive_name(type, drive);
-			SUPBOUND(size, strlen(outparam) + 1);
-			break;
-
-			IN(FDSETDRVPRM, UDP, dp);
-			OUT(FDGETDRVPRM, UDP);
-
-		case FDPOLLDRVSTAT:
-			LOCK_FDC(drive, 1);
-			CALL(poll_drive(1, FD_RAW_NEED_DISK));
-			process_fd_request();
-			/* fall through */
-			OUT(FDGETDRVSTAT, UDRS);
-
-		case FDRESET:
-			return user_reset_fdc(drive, (int)param, 1);
-
-			OUT(FDGETFDCSTAT, UFDCS);
-
-		case FDWERRORCLR:
-			CLEARSTRUCT(UDRWE);
-			return 0;
-			OUT(FDWERRORGET, UDRWE);
-
-		case FDRAWCMD:
-			if (type)
-				return -EINVAL;
-			LOCK_FDC(drive, 1);
-			set_floppy(drive);
-			CALL(i = raw_cmd_ioctl(cmd, (void __user *)param));
-			process_fd_request();
-			return i;
-
-		case FDTWADDLE:
-			LOCK_FDC(drive, 1);
-			twaddle();
-			process_fd_request();
-			return 0;
-
-		default:
+		set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
+		set_bit(FD_VERIFY_BIT, &UDRS->flags);
+		process_fd_request();
+		return ret;
+	case FDCLRPRM:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		current_type[drive] = NULL;
+		floppy_sizes[drive] = MAX_DISK_SIZE << 1;
+		UDRS->keep_data = 0;
+		return invalidate_drive(bdev);
+	case FDSETPRM:
+	case FDDEFPRM:
+		return set_geometry(cmd, &inparam.g, drive, type, bdev);
+	case FDGETPRM:
+		ret = get_floppy_geometry(drive, type,
+					  (struct floppy_struct **)&outparam);
+		if (ret)
+			return ret;
+		break;
+	case FDMSGON:
+		UDP->flags |= FTD_MSG;
+		return 0;
+	case FDMSGOFF:
+		UDP->flags &= ~FTD_MSG;
+		return 0;
+	case FDFMTBEG:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR)
+			return -EINTR;
+		ret = UDRS->flags;
+		process_fd_request();
+		if (ret & FD_VERIFY)
+			return -ENODEV;
+		if (!(ret & FD_DISK_WRITABLE))
+			return -EROFS;
+		return 0;
+	case FDFMTTRK:
+		if (UDRS->fd_ref != 1)
+			return -EBUSY;
+		return do_format(drive, &inparam.f);
+	case FDFMTEND:
+	case FDFLUSH:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		return invalidate_drive(bdev);
+	case FDSETEMSGTRESH:
+		UDP->max_errors.reporting = (unsigned short)(param & 0x0f);
+		return 0;
+	case FDGETMAXERRS:
+		outparam = &UDP->max_errors;
+		break;
+	case FDSETMAXERRS:
+		UDP->max_errors = inparam.max_errors;
+		break;
+	case FDGETDRVTYP:
+		outparam = drive_name(type, drive);
+		SUPBOUND(size, strlen((const char *)outparam) + 1);
+		break;
+	case FDSETDRVPRM:
+		*UDP = inparam.dp;
+		break;
+	case FDGETDRVPRM:
+		outparam = UDP;
+		break;
+	case FDPOLLDRVSTAT:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR)
+			return -EINTR;
+		process_fd_request();
+		/* fall through */
+	case FDGETDRVSTAT:
+		outparam = UDRS;
+		break;
+	case FDRESET:
+		return user_reset_fdc(drive, (int)param, true);
+	case FDGETFDCSTAT:
+		outparam = UFDCS;
+		break;
+	case FDWERRORCLR:
+		memset(UDRWE, 0, sizeof(*UDRWE));
+		return 0;
+	case FDWERRORGET:
+		outparam = UDRWE;
+		break;
+	case FDRAWCMD:
+		if (type)
 			return -EINVAL;
-		}
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		set_floppy(drive);
+		i = raw_cmd_ioctl(cmd, (void __user *)param);
+		if (i == -EINTR)
+			return -EINTR;
+		process_fd_request();
+		return i;
+	case FDTWADDLE:
+		if (lock_fdc(drive, true))
+			return -EINTR;
+		twaddle();
+		process_fd_request();
+		return 0;
+	default:
+		return -EINVAL;
+	}
 
 	if (_IOC_DIR(cmd) & _IOC_READ)
 		return fd_copyout((void __user *)param, outparam, size);
-	else
-		return 0;
-#undef OUT
-#undef IN
+
+	return 0;
 }
 
 static void __init config_types(void)
 {
-	int first = 1;
+	bool has_drive = false;
 	int drive;
 
 	/* read drive info out of physical CMOS */
@@ -3655,17 +3627,22 @@
 			name = temparea;
 		}
 		if (name) {
-			const char *prepend = ",";
-			if (first) {
-				prepend = KERN_INFO "Floppy drive(s):";
-				first = 0;
+			const char *prepend;
+			if (!has_drive) {
+				prepend = "";
+				has_drive = true;
+				pr_info("Floppy drive(s):");
+			} else {
+				prepend = ",";
 			}
-			printk("%s fd%d is %s", prepend, drive, name);
+
+			pr_cont("%s fd%d is %s", prepend, drive, name);
 		}
 		*UDP = *params;
 	}
-	if (!first)
-		printk("\n");
+
+	if (has_drive)
+		pr_cont("\n");
 }
 
 static int floppy_release(struct gendisk *disk, fmode_t mode)
@@ -3705,8 +3682,8 @@
 		goto out2;
 
 	if (!UDRS->fd_ref && (UDP->flags & FD_BROKEN_DCL)) {
-		USETF(FD_DISK_CHANGED);
-		USETF(FD_VERIFY);
+		set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
+		set_bit(FD_VERIFY_BIT, &UDRS->flags);
 	}
 
 	if (UDRS->fd_ref == -1 || (UDRS->fd_ref && (mode & FMODE_EXCL)))
@@ -3735,9 +3712,8 @@
 			INFBOUND(try, 16);
 			tmp = (char *)fd_dma_mem_alloc(1024 * try);
 		}
-		if (!tmp && !floppy_track_buffer) {
+		if (!tmp && !floppy_track_buffer)
 			fallback_on_nodma_alloc(&tmp, 2048 * try);
-		}
 		if (!tmp && !floppy_track_buffer) {
 			DPRINT("Unable to allocate DMA memory\n");
 			goto out;
@@ -3767,11 +3743,12 @@
 		if (mode & (FMODE_READ|FMODE_WRITE)) {
 			UDRS->last_checked = 0;
 			check_disk_change(bdev);
-			if (UTESTF(FD_DISK_CHANGED))
+			if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags))
 				goto out;
 		}
 		res = -EROFS;
-		if ((mode & FMODE_WRITE) && !(UTESTF(FD_DISK_WRITABLE)))
+		if ((mode & FMODE_WRITE) &&
+		    !test_bit(FD_DISK_WRITABLE_BIT, &UDRS->flags))
 			goto out;
 	}
 	mutex_unlock(&open_lock);
@@ -3795,17 +3772,18 @@
 {
 	int drive = (long)disk->private_data;
 
-	if (UTESTF(FD_DISK_CHANGED) || UTESTF(FD_VERIFY))
+	if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+	    test_bit(FD_VERIFY_BIT, &UDRS->flags))
 		return 1;
 
 	if (time_after(jiffies, UDRS->last_checked + UDP->checkfreq)) {
-		lock_fdc(drive, 0);
-		poll_drive(0, 0);
+		lock_fdc(drive, false);
+		poll_drive(false, 0);
 		process_fd_request();
 	}
 
-	if (UTESTF(FD_DISK_CHANGED) ||
-	    UTESTF(FD_VERIFY) ||
+	if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+	    test_bit(FD_VERIFY_BIT, &UDRS->flags) ||
 	    test_bit(drive, &fake_change) ||
 	    (!ITYPE(UDRS->fd_device) && !current_type[drive]))
 		return 1;
@@ -3818,8 +3796,7 @@
  * a disk in the drive, and whether that disk is writable.
  */
 
-static void floppy_rb0_complete(struct bio *bio,
-			       int err)
+static void floppy_rb0_complete(struct bio *bio, int err)
 {
 	complete((struct completion *)bio->bi_private);
 }
@@ -3877,14 +3854,16 @@
 	int cf;
 	int res = 0;
 
-	if (UTESTF(FD_DISK_CHANGED) ||
-	    UTESTF(FD_VERIFY) || test_bit(drive, &fake_change) || NO_GEOM) {
+	if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+	    test_bit(FD_VERIFY_BIT, &UDRS->flags) ||
+	    test_bit(drive, &fake_change) || NO_GEOM) {
 		if (usage_count == 0) {
-			printk("VFS: revalidate called on non-open device.\n");
+			pr_info("VFS: revalidate called on non-open device.\n");
 			return -EFAULT;
 		}
-		lock_fdc(drive, 0);
-		cf = UTESTF(FD_DISK_CHANGED) || UTESTF(FD_VERIFY);
+		lock_fdc(drive, false);
+		cf = (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+		      test_bit(FD_VERIFY_BIT, &UDRS->flags));
 		if (!(cf || test_bit(drive, &fake_change) || NO_GEOM)) {
 			process_fd_request();	/*already done by another thread */
 			return 0;
@@ -3894,7 +3873,7 @@
 		if (buffer_drive == drive)
 			buffer_track = -1;
 		clear_bit(drive, &fake_change);
-		UCLEARF(FD_DISK_CHANGED);
+		clear_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
 		if (cf)
 			UDRS->generation++;
 		if (NO_GEOM) {
@@ -3902,7 +3881,7 @@
 			res = __floppy_read_block_0(opened_bdev[drive]);
 		} else {
 			if (cf)
-				poll_drive(0, FD_RAW_NEED_DISK);
+				poll_drive(false, FD_RAW_NEED_DISK);
 			process_fd_request();
 		}
 	}
@@ -3934,21 +3913,21 @@
 	output_byte(FD_DUMPREGS);	/* 82072 and better know DUMPREGS */
 	if (FDCS->reset)
 		return FDC_NONE;
-	if ((r = result()) <= 0x00)
+	r = result();
+	if (r <= 0x00)
 		return FDC_NONE;	/* No FDC present ??? */
 	if ((r == 1) && (reply_buffer[0] == 0x80)) {
-		printk(KERN_INFO "FDC %d is an 8272A\n", fdc);
+		pr_info("FDC %d is an 8272A\n", fdc);
 		return FDC_8272A;	/* 8272a/765 don't know DUMPREGS */
 	}
 	if (r != 10) {
-		printk
-		    ("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
-		     fdc, r);
+		pr_info("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
+			fdc, r);
 		return FDC_UNKNOWN;
 	}
 
 	if (!fdc_configure()) {
-		printk(KERN_INFO "FDC %d is an 82072\n", fdc);
+		pr_info("FDC %d is an 82072\n", fdc);
 		return FDC_82072;	/* 82072 doesn't know CONFIGURE */
 	}
 
@@ -3956,52 +3935,50 @@
 	if (need_more_output() == MORE_OUTPUT) {
 		output_byte(0);
 	} else {
-		printk(KERN_INFO "FDC %d is an 82072A\n", fdc);
+		pr_info("FDC %d is an 82072A\n", fdc);
 		return FDC_82072A;	/* 82072A as found on Sparcs. */
 	}
 
 	output_byte(FD_UNLOCK);
 	r = result();
 	if ((r == 1) && (reply_buffer[0] == 0x80)) {
-		printk(KERN_INFO "FDC %d is a pre-1991 82077\n", fdc);
-		return FDC_82077_ORIG;	/* Pre-1991 82077, doesn't know 
+		pr_info("FDC %d is a pre-1991 82077\n", fdc);
+		return FDC_82077_ORIG;	/* Pre-1991 82077, doesn't know
 					 * LOCK/UNLOCK */
 	}
 	if ((r != 1) || (reply_buffer[0] != 0x00)) {
-		printk("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
-		       fdc, r);
+		pr_info("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
+			fdc, r);
 		return FDC_UNKNOWN;
 	}
 	output_byte(FD_PARTID);
 	r = result();
 	if (r != 1) {
-		printk("FDC %d init: PARTID: unexpected return of %d bytes.\n",
-		       fdc, r);
+		pr_info("FDC %d init: PARTID: unexpected return of %d bytes.\n",
+			fdc, r);
 		return FDC_UNKNOWN;
 	}
 	if (reply_buffer[0] == 0x80) {
-		printk(KERN_INFO "FDC %d is a post-1991 82077\n", fdc);
+		pr_info("FDC %d is a post-1991 82077\n", fdc);
 		return FDC_82077;	/* Revised 82077AA passes all the tests */
 	}
 	switch (reply_buffer[0] >> 5) {
 	case 0x0:
 		/* Either a 82078-1 or a 82078SL running at 5Volt */
-		printk(KERN_INFO "FDC %d is an 82078.\n", fdc);
+		pr_info("FDC %d is an 82078.\n", fdc);
 		return FDC_82078;
 	case 0x1:
-		printk(KERN_INFO "FDC %d is a 44pin 82078\n", fdc);
+		pr_info("FDC %d is a 44pin 82078\n", fdc);
 		return FDC_82078;
 	case 0x2:
-		printk(KERN_INFO "FDC %d is a S82078B\n", fdc);
+		pr_info("FDC %d is a S82078B\n", fdc);
 		return FDC_S82078B;
 	case 0x3:
-		printk(KERN_INFO "FDC %d is a National Semiconductor PC87306\n",
-		       fdc);
+		pr_info("FDC %d is a National Semiconductor PC87306\n", fdc);
 		return FDC_87306;
 	default:
-		printk(KERN_INFO
-		       "FDC %d init: 82078 variant with unknown PARTID=%d.\n",
-		       fdc, reply_buffer[0] >> 5);
+		pr_info("FDC %d init: 82078 variant with unknown PARTID=%d.\n",
+			fdc, reply_buffer[0] >> 5);
 		return FDC_82078_UNKN;
 	}
 }				/* get_fdc_version */
@@ -4113,9 +4090,9 @@
 				else
 					param = config_params[i].def_param;
 				if (config_params[i].fn)
-					config_params[i].
-					    fn(ints, param,
-					       config_params[i].param2);
+					config_params[i].fn(ints, param,
+							    config_params[i].
+							    param2);
 				if (config_params[i].var) {
 					DPRINT("%s=%d\n", str, param);
 					*config_params[i].var = param;
@@ -4129,8 +4106,8 @@
 
 		DPRINT("allowed options are:");
 		for (i = 0; i < ARRAY_SIZE(config_params); i++)
-			printk(" %s", config_params[i].name);
-		printk("\n");
+			pr_cont(" %s", config_params[i].name);
+		pr_cont("\n");
 	} else
 		DPRINT("botched floppy option\n");
 	DPRINT("Read Documentation/blockdev/floppy.txt\n");
@@ -4148,7 +4125,8 @@
 	drive = p->id;
 	return sprintf(buf, "%X\n", UDP->cmos);
 }
-DEVICE_ATTR(cmos,S_IRUGO,floppy_cmos_show,NULL);
+
+DEVICE_ATTR(cmos, S_IRUGO, floppy_cmos_show, NULL);
 
 static void floppy_device_release(struct device *dev)
 {
@@ -4160,7 +4138,7 @@
 
 	for (fdc = 0; fdc < N_FDC; fdc++)
 		if (FDCS->address != -1)
-			user_reset_fdc(-1, FD_RESET_ALWAYS, 0);
+			user_reset_fdc(-1, FD_RESET_ALWAYS, false);
 
 	return 0;
 }
@@ -4172,8 +4150,8 @@
 
 static struct platform_driver floppy_driver = {
 	.driver = {
-		.name = "floppy",
-		.pm = &floppy_pm_ops,
+		   .name = "floppy",
+		   .pm = &floppy_pm_ops,
 	},
 };
 
@@ -4245,16 +4223,16 @@
 		else
 			floppy_sizes[i] = MAX_DISK_SIZE << 1;
 
-	reschedule_timeout(MAXTIMEOUT, "floppy init", MAXTIMEOUT);
+	reschedule_timeout(MAXTIMEOUT, "floppy init");
 	config_types();
 
 	for (i = 0; i < N_FDC; i++) {
 		fdc = i;
-		CLEARSTRUCT(FDCS);
+		memset(FDCS, 0, sizeof(*FDCS));
 		FDCS->dtr = -1;
 		FDCS->dor = 0x4;
 #if defined(__sparc__) || defined(__mc68000__)
-		/*sparcs/sun3x don't have a DOR reset which we can fall back on to */
+	/*sparcs/sun3x don't have a DOR reset which we can fall back on to */
 #ifdef __mc68000__
 		if (MACH_IS_SUN3X)
 #endif
@@ -4283,11 +4261,11 @@
 
 	/* initialise drive state */
 	for (drive = 0; drive < N_DRIVE; drive++) {
-		CLEARSTRUCT(UDRS);
-		CLEARSTRUCT(UDRWE);
-		USETF(FD_DISK_NEWCHANGE);
-		USETF(FD_DISK_CHANGED);
-		USETF(FD_VERIFY);
+		memset(UDRS, 0, sizeof(*UDRS));
+		memset(UDRWE, 0, sizeof(*UDRWE));
+		set_bit(FD_DISK_NEWCHANGE_BIT, &UDRS->flags);
+		set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
+		set_bit(FD_VERIFY_BIT, &UDRS->flags);
 		UDRS->fd_device = -1;
 		floppy_track_buffer = NULL;
 		max_buffer_sectors = 0;
@@ -4307,7 +4285,7 @@
 		if (FDCS->address == -1)
 			continue;
 		FDCS->rawcmd = 2;
-		if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) {
+		if (user_reset_fdc(-1, FD_RESET_ALWAYS, false)) {
 			/* free ioports reserved by floppy_grab_irq_and_dma() */
 			floppy_release_regions(fdc);
 			FDCS->address = -1;
@@ -4330,12 +4308,12 @@
 		 * properly, so force a reset for the standard FDC clones,
 		 * to avoid interrupt garbage.
 		 */
-		user_reset_fdc(-1, FD_RESET_ALWAYS, 0);
+		user_reset_fdc(-1, FD_RESET_ALWAYS, false);
 	}
 	fdc = 0;
 	del_timer(&fd_timeout);
 	current_drive = 0;
-	initialising = 0;
+	initialized = true;
 	if (have_no_fdc) {
 		DPRINT("no floppy controllers found\n");
 		err = have_no_fdc;
@@ -4356,7 +4334,8 @@
 		if (err)
 			goto out_flush_work;
 
-		err = device_create_file(&floppy_device[drive].dev,&dev_attr_cmos);
+		err = device_create_file(&floppy_device[drive].dev,
+					 &dev_attr_cmos);
 		if (err)
 			goto out_unreg_platform_dev;
 
@@ -4420,8 +4399,10 @@
 	const struct io_region *p;
 
 	for (p = io_regions; p < ARRAY_END(io_regions); p++) {
-		if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
-			DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
+		if (!request_region(FDCS->address + p->offset,
+				    p->size, "floppy")) {
+			DPRINT("Floppy io-port 0x%04lx in use\n",
+			       FDCS->address + p->offset);
 			floppy_release_allocated_regions(fdc, p);
 			return -EBUSY;
 		}
@@ -4512,11 +4493,9 @@
 static void floppy_release_irq_and_dma(void)
 {
 	int old_fdc;
-#ifdef FLOPPY_SANITY_CHECK
 #ifndef __sparc__
 	int drive;
 #endif
-#endif
 	long tmpsize;
 	unsigned long tmpaddr;
 	unsigned long flags;
@@ -4547,20 +4526,18 @@
 		buffer_min = buffer_max = -1;
 		fd_dma_mem_free(tmpaddr, tmpsize);
 	}
-#ifdef FLOPPY_SANITY_CHECK
 #ifndef __sparc__
 	for (drive = 0; drive < N_FDC * 4; drive++)
 		if (timer_pending(motor_off_timer + drive))
-			printk("motor off timer %d still active\n", drive);
+			pr_info("motor off timer %d still active\n", drive);
 #endif
 
 	if (timer_pending(&fd_timeout))
-		printk("floppy timer still active:%s\n", timeout_message);
+		pr_info("floppy timer still active:%s\n", timeout_message);
 	if (timer_pending(&fd_timer))
-		printk("auxiliary floppy timer still active\n");
+		pr_info("auxiliary floppy timer still active\n");
 	if (work_pending(&floppy_work))
-		printk("work still pending\n");
-#endif
+		pr_info("work still pending\n");
 	old_fdc = fdc;
 	for (fdc = 0; fdc < N_FDC; fdc++)
 		if (FDCS->address != -1)
@@ -4577,7 +4554,9 @@
 	char *ptr;
 
 	while (*cfg) {
-		for (ptr = cfg; *cfg && *cfg != ' ' && *cfg != '\t'; cfg++) ;
+		ptr = cfg;
+		while (*cfg && *cfg != ' ' && *cfg != '\t')
+			cfg++;
 		if (*cfg) {
 			*cfg = '\0';
 			cfg++;
@@ -4625,6 +4604,7 @@
 	/* eject disk, if any */
 	fd_eject(0);
 }
+
 module_exit(floppy_module_exit);
 
 module_param(floppy, charp, 0);
@@ -4636,9 +4616,10 @@
 
 /* This doesn't actually get used other than for module information */
 static const struct pnp_device_id floppy_pnpids[] = {
-	{ "PNP0700", 0 },
-	{ }
+	{"PNP0700", 0},
+	{}
 };
+
 MODULE_DEVICE_TABLE(pnp, floppy_pnpids);
 
 #else
diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c
index a808b15..eb2091a 100644
--- a/drivers/block/osdblk.c
+++ b/drivers/block/osdblk.c
@@ -476,7 +476,9 @@
 	kfree(cls);
 }
 
-static ssize_t class_osdblk_list(struct class *c, char *data)
+static ssize_t class_osdblk_list(struct class *c,
+				struct class_attribute *attr,
+				char *data)
 {
 	int n = 0;
 	struct list_head *tmp;
@@ -500,7 +502,9 @@
 	return n;
 }
 
-static ssize_t class_osdblk_add(struct class *c, const char *buf, size_t count)
+static ssize_t class_osdblk_add(struct class *c,
+				struct class_attribute *attr,
+				const char *buf, size_t count)
 {
 	struct osdblk_device *osdev;
 	ssize_t rc;
@@ -592,7 +596,9 @@
 	return rc;
 }
 
-static ssize_t class_osdblk_remove(struct class *c, const char *buf,
+static ssize_t class_osdblk_remove(struct class *c,
+					struct class_attribute *attr,
+					const char *buf,
 					size_t count)
 {
 	struct osdblk_device *osdev = NULL;
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index b72935b..39c8514 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -284,7 +284,7 @@
 	return len;
 }
 
-static struct sysfs_ops kobj_pkt_ops = {
+static const struct sysfs_ops kobj_pkt_ops = {
 	.show = kobj_pkt_show,
 	.store = kobj_pkt_store
 };
@@ -337,7 +337,9 @@
 {
 	kfree(cls);
 }
-static ssize_t class_pktcdvd_show_map(struct class *c, char *data)
+static ssize_t class_pktcdvd_show_map(struct class *c,
+					struct class_attribute *attr,
+					char *data)
 {
 	int n = 0;
 	int idx;
@@ -356,7 +358,9 @@
 	return n;
 }
 
-static ssize_t class_pktcdvd_store_add(struct class *c, const char *buf,
+static ssize_t class_pktcdvd_store_add(struct class *c,
+					struct class_attribute *attr,
+					const char *buf,
 					size_t count)
 {
 	unsigned int major, minor;
@@ -376,7 +380,9 @@
 	return -EINVAL;
 }
 
-static ssize_t class_pktcdvd_store_remove(struct class *c, const char *buf,
+static ssize_t class_pktcdvd_store_remove(struct class *c,
+					  struct class_attribute *attr,
+					  const char *buf,
 					size_t count)
 {
 	unsigned int major, minor;
diff --git a/drivers/char/ChangeLog b/drivers/char/ChangeLog
deleted file mode 100644
index 56b8a2e..0000000
--- a/drivers/char/ChangeLog
+++ /dev/null
@@ -1,775 +0,0 @@
-2001-08-11  Tim Waugh  <twaugh@redhat.com>
-
-	* serial.c (get_pci_port): Deal with awkward Titan cards.
-
-1998-08-26  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (rs_open): Correctly decrement the module in-use count
-		on errors.
-
-Thu Feb 19 14:24:08 1998  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (tty_name): Remove the non-reentrant (and non-SMP safe)
-		version of tty_name, and rename the reentrant _tty_name
-		function to be tty_name.
-		(tty_open): Add a warning message stating callout devices
-		are deprecated.
-
-Mon Dec  1 08:24:15 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (tty_get_baud_rate): Print a warning syslog if the
-		tty->alt_speed kludge is used; this means the system is
-		using the deprecated SPD_HI ioctls.
-
-Mon Nov 24 10:37:49 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c, esp.c, rocket.c: Change drivers to take advantage of
-	 	tty_get_baud_rate().
-	
-	* tty_io.c (tty_get_baud_rate): New function which computes the
-		correct baud rate for the tty.  More factoring out of
-		common code out of the serial driver to the high-level tty
-		functions....
-
-Sat Nov 22 07:53:36 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c, esp.c, rocket.c: Add tty->driver.break() routine, and
- 		allow high-level tty code to handle the break and soft
- 		carrier ioctls.
-	
-	* tty_ioctl.c (n_tty_ioctl): Support TIOCGSOFTCAR and
- 		TIOCSSOFTCAR, so that device drivers don't have to support
- 		it.
-
-	* serial.c (autoconfig): Change 16750 test to hopefully eliminate
-		false results by people with strange 16550As being
-		detected as 16750s.  Hopefully 16750s will still be
-		detected as 16750, and other weird UARTs won't get poorly
-		autodetected.  If this doesn't work, I'll have to disable
-		the auto identification for the 16750.
-
-	* tty_io.c (tty_hangup): Now actually do the tty hangup
-		processing during the timer processing, and disable
-		interrupts while doing the hangup processing.  This avoids
-		several nasty race conditions which happened when the
-		hangup processing was done asynchronously.
-		(tty_ioctl): Do break handling in the tty driver if
-		driver's break function is supported.  
-		(tty_flip_buffer_push): New exported function which should
-		be used by drivers to push characters in the flip buffer
-		to the tty handler.  This may either be done using a task
-		queue function for better CPU efficiency, or directly for
-		low latency operation.
-
-	* serial.c (rs_set_termios): Fix bug rs_set_termios when
-		transitioning away from B0, submitted by Stanislav
-		Voronyi. 
-
-Thu Jun 19 20:05:58 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (begin_break, end_break, rs_ioctl): Applied patch
-		to support BSD ioctls to set and clear the break
-		condition explicitly.
-
-	* console.c (scrup, scrdown, insert_line, delete_line): Applied
-		fix suggested by Aaron Tiensivu to speed up block scrolls
-		up and down.
-
-	* n_tty.c (opost_block, write_chan): Added a modified "fast
- 		console" patch which processes a block of text via
-		"cooking" efficiently.
-
-Wed Jun 18 15:25:50 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (init_dev, release_dev): Applied fix suggested by Bill
-		Hawes to prevent race conditions in the tty code.
-
-	* n_tty.c (n_tty_chars_in_buffer): Applied fix suggested by Bill
-		Hawes so that n_tty_chars_in_buffer returns the correct
-		value in the case when the tty is in cannonical mode.  (To
-		avoid a pty deadlock with telnetd.)
-
-Thu Feb 27 01:53:08 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (change_speed): Add support for the termios flag
-		CMSPAR, which allows the user to select stick parity.
-		(i.e, if PARODD is set, the parity bit is always 1; if
-		PARRODD is not set, then the parity bit is always 0).
-
-Wed Feb 26 19:03:10 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (cleanup_module): Fix memory leak when using the serial
-		driver as a module; make sure tmp_buf gets freed!
-
-Tue Feb 25 11:01:59 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (set_modem_info): Add support for setting and clearing
-		the OUT1 and OUT2 bits.  (For special case UART's, usually
-		for half-duplex.)
-		(autoconfig, change_speed): Fix TI 16750 support.
-
-Sun Feb 16 00:14:43 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (release_dev): Add sanity check to make sure there are
-		no waiters on tty->read_wait or tty->write_wait.
-
-	* serial.c (rs_init): Don't autoconfig a device if the I/O region
-		is already reserved.
-
-	* serial.c (serial_proc_info): Add support for /proc/serial.
-
-Thu Feb 13 00:49:10 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (receive_chars): When the UART repotrs an overrun
- 		condition, it does so with a valid character.  Changed to
- 		not throw away the valid character, but instead report the
-		overrun after the valid character.
-
-	* serial.c: Added new #ifdef's for some of the advanced serial
-		driver features.  A minimal driver that only supports COM
-		1/2/3/4 without sharing serial interrupts only takes 17k;
-		the full driver takes 32k.
-		
-Wed Feb 12 14:50:44 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* vt.c:
-	* pty.c: 
-	* tty_ioctl.c: 
-	* serial.c: Update routines to use the new 2.1 memory access
-	 	routines.
-
-Wed Dec  4 07:51:52 1996  Theodore Ts'o  <tytso@localhost.mit.edu>
-
-	* serial.c (change_speed): Use save_flags(); cli() and
-		restore_flags() in order to ensure we don't accidentally
-		turn on interrupts when starting up the port.
-		(startup): Move the insertion of serial structure into the
-		IRQ chain earlier into the startup processing.  Interrupts
-		should be off this whole time, but we eventually will want
-		to reduce this window.
-
-Thu Nov 21 10:05:22 1996  Theodore Ts'o  <tytso@localhost.mit.edu>
-
-	* tty_ioctl.c (tty_wait_until_sent): Always check the driver
- 		wait_until_ready routine, even if there are no characters
- 		in the xmit buffer.  (There may be charactes in the device
- 		FIFO.)
-		(n_tty_ioctl): Add new flag tty->flow_stopped which
- 		indicates whether the tty is stopped due to a request by
- 		the TCXONC ioctl (used by tcflow).  If so, don't let an
- 		incoming XOFF character restart the tty.  The tty can only
- 		be restarted by another TCXONC request.
-
-	* tty_io.c (start_tty): Don't allow the tty to be restarted if
-		tty->flow_stopped is true.
-
-	* n_tty.c (n_tty_receive_char): If tty->flow_stopped is true, and
- 		IXANY is set, don't eat a character trying to restart the
- 		tty.
-
-	* serial.c (startup): Remove need for MCR_noint from the
- 		async_struct structure.  Only turn on DTR and RTS if the
- 		baud rate is not zero.
-		(change_speed): More accurately calculate the timeout
- 		value based on the word size.  Move responsibility of
- 		hangup when speed becomes B0 to rs_set_termios()
-		(set_serial_info): When changing the UART type set the
- 		current xmit_fifo_size as well as the permanent
- 		xmit_fifo_size.
-		(rs_ioctl): Fix TCSBRK (used by tcdrain) and TCSBRKP
- 		ioctls to return EINTR if interrupted by a signal.
-		(rs_set_termios): If the baud rate changes to or from B0,
- 		this function is now responsible for setting or clearing
- 		DTR and RTS.  DTR and RTS are only be changed on the
- 		transition to or from the B0 state.
-		(rs_close): Wait for the characters to drain based on
- 		info->timeout.  At low baud rates (50 bps), it may take a
- 		long time for the FIFO to completely drain out!
-		(rs_wait_until_sent): Fixed timeout handling.  Now
- 		releases control to the scheduler, but checks frequently
- 		enough so that the function is sensitive enough to pass
- 		the timing requirements of the NIST-PCTS.
-		(block_til_ready): When opening the device, don't turn on
- 		DTR and RTS if the baud rate is B0.
-
-Thu Nov 14 00:06:09 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c (autoconfig): Fix autoconfiguration problems;
-		info->flags wasn't getting initialized from the state
-		structure.  Put in more paranoid test for the 16750.
-
-Fri Nov  8 20:19:50 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* n_tty.c (n_tty_flush_buffer): Only call driver->unthrottle() if
- 		the tty was previous throttled.
-		(n_tty_set_termios, write_chan): Add changes suggested by
- 			Simon P. Allen to allow hardware cooking.
-
-	* tty_ioctl.c (set_termios): If we get a signal while waiting for
-		the tty to drain, return -EINTR.
-	
-	* serial.c (change_speed): Add support for CREAD, as required by
-	 	POSIX.
-
-Sat Nov  2 20:43:10 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* serial.c: Wholesale changes.  Added support for the Startech
- 		16650 and 16650V2 chips.  (WARNING: the new startech
- 		16650A may or may not work!)  Added support for the
- 		TI16750 (not yet tested).  Split async_struct into a
- 		transient part (async_struct) and a permanent part
-		(serial_state) which contains the configuration
- 		information for the ports.  Added new driver routines
- 		wait_until_sent() and send_xchar() to help with POSIX
- 		compliance.  Added support for radio clocks which waggle
-		the carrier detect line (CONFIG_HARD_PPS).
-	
-	* tty_ioctl.c (tty_wait_until_sent): Added call to new driver
-		function tty->driver.wait_until_sent(), which returns when
-		the tty's device xmit buffers are drained.  Needed for
-		full POSIX compliance.
-
-		(send_prio_char): New function, called by the ioctl's
-		TCIOFF and TCION; uses the new driver call send_xchar(),
-		which will send the XON or XOFF character at high priority
-		(and even if tty output is stopped).
-
-Wed Jun  5 18:52:04 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* pty.c (pty_close): When closing a pty, make sure packet mode is
-	 	cleared.
-
-Sun May 26 09:33:52 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* vesa_blank.c (set_vesa_blanking): Add missing verify_area() call.
-
-	* selection.c (set_selection): Add missing verify_area() call.
-
-	* tty_io.c (tty_ioctl): Add missing verify_area() calls.
-
-	* serial.c (rs_ioctl): Add missing verify_area() calls.
-		(rs_init): Allow initialization of serial driver
-		configuration from a module.
-
-	* random.c (extract_entropy): Add missing verify_area call.
-		Don't limit number of characters returned to
-		32,768. Extract entropy is now no longer a inlined
-		function.
-
-		(random_read): Check return value in case extract_entropy
-		returns an error.
-
-		(secure_tcp_sequence_number): New function which returns a
-		secure TCP sequence number.  This is needed to prevent some
-		nasty TCP hijacking attacks.
-	
-		(init_std_data): Initialize using gettimeofday() instead of
-		struct timeval xtime.
-
-		(fast_add_entropy_word, add_entropy_word): Rename the
-		inline function add_entropy_word() to
-		fast_add_entropy_word().  Make add_entropy_word() be the
-		non-inlined function which is used in non-timing critical
-		places, in order to save space.
-
-		(initialize_benchmark, begin_benchmark, end_benchmark): New
-		functions defined when RANDOM_BENCHMARK is defined.  They
-		allow us to benchmark the speed of the
-		add_timer_randomness() call.
-
-		(int_ln, rotate_left): Add two new inline functions with
-		i386 optimized asm instructions.  This speeds up the
-		critical add_entropy_word() and add_timer_randomness()
-		functions, which are called from interrupt handlers.
-
-Tue May  7 22:51:11 1996    <tytso@rsts-11.mit.edu>
-
-	* random.c (add_timer_randomness): Limit the amount randomness
-		that we estimate to 12 bits.  (An arbitrary amount).
-
-		(extract_entropy): To make it harder to analyze the hash
-		function, fold the hash function in half using XOR, and
-		use the folded result as the value to emit to the user.
-		Also, add timer randomness each pass through the
-		exact_entropy call, to increase the amount of unknown
-		values during the extraction process.
-
-		(random_ioctl): Use IOR/IOW definitions to define the
-		ioctl values used by the /dev/random driver.  Allow the
-		old ioctl values to be used for backwards compatibility
-		(for a limited amount of time).
-
-Wed Apr 24 14:02:04 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
-
-	* random.c (add_timer_randomness): Use 2nd derivative as well to
-		better estimate entropy.
-
-		(rand_initialize): Explicitly initialize all the pointers
-		to NULL.  (Clearing pointers using memset isn't portable.)
-		Initialize the random pool with OS-dependent data.
-
-		(random_write): Add sanity checking to the arguments to
-		random_write(), so that bad arguments won't cause a kernel
-		SEGV. 
-
-		(random_read): Update the access time of the device inode
-		when you return data to the user.
-
-		(random_ioctl): Wake up the random_wait channel when there
-		are only WAIT_INPUT_BITS available.  Add more paranoia
-		checks to make sure entropy_count doesn't go beyond the
-		bounds of (0, POOLSIZE).  Add a few missing verify_area
-		checks.  Add support for the RNDCLEARPOOL ioctl, which
-		zaps the random pool.
-
-		(add_timer_randomness): Wake up the random_wait
-		channel only when there are WAIT_INPUT_BITS available.
-
-		(random_select): Allow a random refresh daemon process to
-		select on /dev/random for writing; wake up the daemon when
-		there are less than WAIT_OUTPUT_BITS bits of randomness
-		available.
-
-Tue Apr 23 22:56:07 1996    <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (init_dev): Change return code when user attempts to
-		open master pty which is already open from EAGAIN to EIO,
-		to match with BSD expectations.  EIO is more correct
-		anyway, since EAGAIN implies that retrying will be
-		successful --- which it might be.... Eventually!!
-
-	* pty.c (pty_open, pty_close): Fix wait loop so that we don't
-		busy loop while waiting for the master side to open.
-		Fix tty opening/closing logic.  TTY_SLAVE_CLOSED was
-		renamed to TTY_OTHER_CLOSED, so that the name is more
-		descriptive.  Also fixed code so that the tty flag
-		actually works correctly now....
-
-Mon Apr  1 10:22:01 1996    <tytso@rsts-11.mit.edu>
-
-	* serial.c (rs_close): Cleaned up modularization changes.
-		Remove code which forced line discipline back to N_TTY
-		this is done in the tty upper layers, and there's no
-		reason to do it here.  (Making this change also
-		removed the requirement that the serial module access
-		the internal kernel symbol "ldiscs".)
-
-	* tty_io.c (tty_init): Formally register a tty_driver entry for
-		/dev/tty (device 4, 0) and /dev/console (device 5, 0).
-		This guarantees that major device numbers 4 and 5 will be
-		reserved for the tty subsystem (as they have to be because
-		of /dev/tty and /dev/console).  Removed tty_regdev, as
-		this interface is no longer necessary.
-
-Sun Mar 17 20:42:47 GMT 1996 <ah@doc.ic.ac.uk>
-
-	* serial.c : modularisation (changes in linux/fs/device.c allow
-		kerneld to automatically load the serial module).
-
-	* Makefile, Config.in : serial modularisation adds.
-
-	* tty_io.c : tty_init_ctty used by to register "cua" driver just
-		for the /dev/tty device (5,0).  Added tty_regdev.
-	
-	* serial.c (shutdown, rs_ioctl) : when port shuts down wakeup processes
-	  waiting on delta_msr_wait. The TIOCMIWAIT ioctl returns EIO
-	  if no change was done since the time of call.
-
-Sat Mar 16 14:33:13 1996 <aeb@cwi.nl>
-
-	* tty_io.c (disassociate_ctty): If disassociate_ctty is called by
-		exit, do not perform an implicit vhangup on a pty.
-
-Fri Feb  9 14:15:47 1996    <tytso@rsts-11.mit.edu>
-
-	* serial.c (block_til_ready): Fixed another race condition which
-		happens if a hangup happens during the open.
-
-Wed Jan 10 10:08:00 1996    <tytso@rsts-11.mit.edu>
-
-	* serial.c (block_til_ready): Remove race condition which happened
-		if a hangup condition happened during the setup of the
-		UART, before rs_open() called block_til_ready().  This
-		caused the info->count counter to be erroneously
-		decremented.
-
-	* serial.c (startup, rs_open): Remove race condition that could
-		cause a memory leak of one page.  (Fortunately, both race
-		conditions were relatively rare in practice.)
-
-Tue Dec  5 13:21:27 1995    <tytso@rsts-11.mit.edu>
-
-	* serial.c (check_modem_status, rs_ioctl): Support the new
-		ioctl()'s TIOCGICOUNT, TIOCMIWAIT.  These allow an
-		application program to wait on a modem serial register
-		status bit change, and to find out how many changes have
-		taken place for the MSR bits.
-
-		(rs_write): Eliminate a race condition which is introduced
-		if it is necessary to wait for the semaphore.
-
-Sat Nov  4 17:14:45 1995    <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (tty_init): Move registration of TTY_MAJOR and
-		TTY_AUX_MAJOR to the end, so that /proc/devices looks
-		prettier. 
-
-	* pty.c (pty_init): Use new major numbers for PTY master and slave
-		devices.  This allow us to have more than 64 pty's.  We
-		register the old pty devices for backwards compatibility.
-		Note that a system should either be using the old pty
-		devices or the new pty devices --- in general, it should
-		try to use both, since they map into the same pty table.
-		The old pty devices are strictly for backwards compatibility.
-
-Wed Oct 11 12:45:24 1995    <tytso@rsts-11.mit.edu>
-
-	* tty_io.c (disassociate_ctty): If disassociate_ctty is called by
-		exit, perform an implicit vhangup on the tty.
-
-	* pty.c (pty_close): When the master pty is closed, send a hangup
-		to the slave pty.
-		(pty_open): Use the flag TTY_SLAVE_CLOSED to test to see
-		if there are any open slave ptys, instead of using
-		tty->link->count.  The old method got confused if there
-		were processes that had hung-up file descriptors on the
-		slave tty.
-
-Tue May  2 00:53:25 1995    <tytso@rsx-11.mit.edu>
-
-	* tty_io.c (tty_set_ldisc): Wait until the output buffer is
-		drained before closing the old line discipline --- needed
-		in only one case: XON/XOFF processing.
-
-	* n_tty.c (n_tty_close): Don't bother waiting until the output
-		driver is closed; in general, the line discipline
-		shouldn't care if the hardware is finished
-		transmitting before the line discipline terminates.
-
-	* tty_io.c (release_dev): Shutdown the line discipline after
-		decrementing the tty count variable; but set the
-		TTY_CLOSING flag so that we know that this tty structure
-		isn't long for this world.
-
-	* tty_io.c (init_dev): Add sanity code to check to see if
-		TTY_CLOSING is set on a tty structure; if so, something
-		bad has happened (probably a line discipline close blocked
-		when it shouldn't have; so do a kernel printk and then
-		return an error).
-
-Wed Apr 26 10:23:44 1995  Theodore Y. Ts'o  <tytso@localhost>
-
-	* tty_io.c (release_dev): Try to shutdown the line discipline
-		*before* decrementing the tty count variable; this removes
-		a potential race condition which occurs when the line
-		discipline close blocks, and another process then tries
-		open the same serial port.
-
-	* serial.c (rs_hangup): When hanging up, flush the output buffer
-		before shutting down the UART.  Otherwise the line
-		discipline close blocks waiting for the characters to get
-		flushed, which never happens until the serial port gets reused.
-
-Wed Apr 12 08:06:16 1995  Theodore Y. Ts'o  <tytso@localhost>
-
-	* serial.c (do_serial_hangup, do_softint, check_modem_status,
-		rs_init):  Hangups are now scheduled via a separate tqueue
-		structure in the async_struct structure, tqueue_hangup.
-		This task is pushed on to the tq_schedule queue, so that
-		it is processed synchronously by the scheduler.
-
-Sat Feb 18 12:13:51 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (disassociate_ctty, tty_open, tty_ioctl): Clear
-		current->tty_old_pgrp field when a session leader
-		acquires a controlling tty, and after a session leader
-		has disassociated from a controlling tty.
-
-Fri Feb 17 09:34:09 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_interrupt_single, rs_interrupt, rs_interrupt_multi): 
-		Change the number of passes made from 64 to be 256,
-		configurable with the #define RS_ISR_PASS_LIMIT.
-
-	* serial.c (rs_init, set_serial_info, get_serial_info, rs_close):
-		Remove support for closing_wait2.  Instead, set
-		tty->closing and rely on the line discipline to prevent
-		echo wars.
-
-	* n_tty.c (n_tty_receive_char):  IEXTEN does not need to be
-		enabled in order for IXANY to be active.
-
-		If tty->closing is set, then only process XON and XOFF
-                characters.
-
-Sun Feb 12 23:57:48 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_timer): Change the interrupt poll time from 60
-		seconds to 10 seconds, configurable with the #define
-		RS_STROBE_TIME.
-
-	* serial.c (rs_interrupt_multi, startup, shutdown, rs_ioctl,
-		set_multiport_struct, get_multiport_struct): Add
-		provisions for a new type of interrupt service routine,
-		which better supports multiple serial ports on a single
-		IRQ.  
-
-Sun Feb  5 19:35:11 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_ioctl.c (n_tty_ioctl, set_termios, tty_wait_until_sent): 
-	* serial.c (rs_ioctl, rs_close): 
-	* cyclades.c (cy_ioctl, cy_close): 
-	* n_tty.c (n_tty_close):  Rename wait_until_sent to
-		tty_wait_until_sent, so that it's a better name to export
-		in ksyms.c.
-
-Sat Feb  4 23:36:20 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_close): Added missing check for closing_wait2 being
-		ASYNC_CLOSING_WAIT_NONE.
-
-Thu Jan 26 09:02:49 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_init, set_serial_info, get_serial_info,
-		rs_close): Support close_wait in the serial driver.
-		This is helpful for slow devices (like serial
-		plotters) so that their outputs don't get flushed upon
-		device close.  This has to be configurable because
-		normally we don't want ports to be hung up for long
-		periods of time during a close when they are not
-		connected to a device, or the device is powered off.
-
-		The default is to wait 30 seconds; in the case of a
-		very slow device, the close_wait timeout should be
-		lengthened.  If it is set to 0, the kernel will wait
-		forever for all of the data to be transmitted.
-
-Thu Jan 17 01:17:20 1995  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (startup, change_speed, rs_init): Add support to detect
-		the StarTech 16650 chip.  Treat it as a 16450 for now,
-		because of its FIFO bugs.
-
-Thu Jan  5 21:21:57 1995  <dahinds@users.sourceforge.net>
-
-	* serial.c: (receive_char): Added counter to prevent infinite loop
-		when a PCMCIA serial device is ejected.
-
-Thu Dec 29 17:53:48 1994    <tytso@rsx-11.mit.edu>
-
-	* tty_io.c (check_tty_count): New procedure which checks
-		tty->count to make sure that it matches with the number of
-		open file descriptors which point at the structure.  If
-		the number doesn't match, it prints a warning message.
-
-Wed Dec 28 15:41:51 1994    <tytso@rsx-11.mit.edu>
-
-	* tty_io.c (do_tty_hangup, disassociate_ctty): At hangup time,
-		save the tty's current foreground process group in the
-		session leader's task structure.  When the session leader
-		terminates, send a SIGHUP, SIGCONT to that process group.
-		This is not required by POSIX, but it's not prohibited
-		either, and it appears to be the least intrusive way
-		to fix a problem that dialup servers have with
-		orphaned process groups caused by modem hangups.
-
-Thu Dec  8 14:52:11 1994    <tytso@rsx-11.mit.edu>
-
-	* serial.c (rs_ioctl): Don't allow most ioctl's if the serial port
-		isn't initialized.
-
-	* serial.c (rs_close): Don't clear the IER if the serial port
-		isn't initialized. 
-
-	* serial.c (block_til_ready): Don't try to block on the dialin
-		port if the serial port isn't initialized.
-
-Wed Dec  7 10:48:30 1994  Si Park (si@wimpol.demon.co.uk)
-	* tty_io.c (tty_register_driver): Fix bug when linking onto
-		the tty_drivers list. We now test that there are elements
-		already on the list before setting the back link from the
-		first element to the new driver.
-
-	* tty_io.c (tty_unregister_driver): Fix bug in unlinking the
-		specified driver from the tty_drivers list. We were not
-		setting the back link correctly. This used to result in
-		a dangling back link pointer and cause panics on the next
-		call to get_tty_driver().
-
-Tue Nov 29 10:21:09 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (tty_unregister_driver): Fix bug in
-		tty_unregister_driver where the pointer to the refcount is
-		tested, instead of the refcount itself.  This caused
-		tty_unregister_driver to always return EBUSY.
-
-Sat Nov 26 11:59:24 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (tty_ioctl): Add support for the new ioctl
-		TIOCTTYGSTRUCT, which allow a kernel debugging program
-		direct read access to the tty and tty_driver structures.
-
-Fri Nov 25 17:26:22 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_set_termios): Don't wake up processes blocked in
-		open when the CLOCAL flag changes, since a blocking
-		open only samples the CLOCAL flag once when it blocks,
-		and doesn't check it again.  (n.b.  FreeBSD has a
-		different behavior for blocking opens; it's not clear
-		whether Linux or FreeBSD's interpretation is correct.
-		POSIX doesn't give clear guidance on this issue, so
-		this may change in the future....)
-
-	* serial.c (block_til_ready): Use the correct termios structure to
-		check the CLOCAL flag.  If the cuaXX device is active,
-		then check the saved termios for the ttySXX device.
-		Otherwise, use the currently active termios structure.
-
-Sun Nov  6 21:05:44 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (change_speed): Add support for direct access of
-		57,600 and 115,200 bps.
-
-Wed Nov  2 10:32:36 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* n_tty.c (n_tty_receive_room): Only allow excess characters
-		through if we are in ICANON mode *and* there are other no
-		pending lines in the buffer.  Otherwise cut and paste over
-		4k breaks.
-
-Sat Oct 29 18:17:34 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_ioctl, get_lsr_info): Added patch suggested by Arne
-		Riiber so that user mode programs can tell when the
-		transmitter shift register is empty.
-
-Thu Oct 27 23:14:29 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_ioctl.c (wait_until_sent): Added debugging printk statements
-		(under the #ifdef TTY_DEBUG_WAIT_UNTIL_SENT)  
-
-	* serial.c (rs_interrupt, rs_interrupt_single, receive_chars,
-		change_speed, rs_close): rs_close now disables receiver
-		interrupts when closing the serial port.  This allows the
-		serial port to close quickly when Linux and a modem (or a
-		mouse) are engaged in an echo war; when closing the serial
-		port, we now first stop listening to incoming characters,
-		and *then* wait for the transmit buffer to drain.  
-
-		In order to make this change, the info->read_status_mask
-		is now used to control what bits of the line status
-		register are looked at in the interrupt routine in all
-		cases; previously it was only used in receive_chars to
-		select a few of the status bits.
-
-Mon Oct 24 23:36:21 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_close): Add a timeout to the transmitter flush
-		loop; this is just a sanity check in case we have flaky
-		(or non-existent-but-configured-by-the-user) hardware.
-
-Fri Oct 21 09:37:23 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (tty_fasync): When asynchronous I/O is enabled, if the
-		process or process group has not be specified yet, set it
-		to be the tty's process group, or if that is not yet set,
-		to the current process's pid.
-
-Thu Oct 20 23:17:28 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* n_tty.c (n_tty_receive_room): If we are doing input
-		canonicalization, let as many characters through as
-		possible, so that the excess characters can be "beeped".
-
-Tue Oct 18 10:02:43 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_start): Removed an incorrect '!' that was
-		preventing transmit interrupts from being re-enabled in
-		rs_start().  Fortunately in most cases it would be
-		re-enabled elsewhere, but this still should be fixed
-		correctly.
-
-Sun Oct  9 23:46:03 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (do_tty_hangup): If the tty driver flags
-		TTY_DRIVER_RESET_TERMIOS is set, then reset the termios
-		settings back to the driver's initial configuration.  This
-		allows the termios settings to be reset even if a process
-		has hung up file descriptors keeping a pty's termios from
-		being freed and reset.
-
-	* tty_io.c (release_dev): Fix memory leak.  The pty's other
-		termios structure should also be freed.
-
-	* serial.c (rs_close, shutdown): Change how we wait for the
-		transmitter to completely drain before shutting down the
-		serial port.  We now do it by scheduling in another
-		process instead of busy looping with the interrupts turned
-		on.  This may eliminate some race condition problems that
-		some people seem to be reporting.
-
-Sun Sep 25 14:18:14 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (release_dev): When freeing a tty make sure that both
-		the tty and the o_tty (if present) aren't a process's
-		controlling tty.  (Previously, we only checked the tty.)
-
-	* serial.c (change_speed): Only enable the Modem Status
-		Interrupt for a port if CLOCAL is not set or CRTSCTS
-		is set.  If we're not checking the carrier detect and
-		CTS line, there's no point in enabling the modem
-		status interrupt.  This will save spurious interrupts
-		from slowing down systems who have terminals that
-		don't support either line.  (Of course, if you want
-		only one of CD and CTS support, you will need a
-		properly wired serial cable.)
-
-Thu Sep 22 08:32:48 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (do_SAK): Return if tty is null.
-
-	* tty_io.c (_tty_name): Return "NULL tty" if the passed in tty is
-		NULL.
-
-Sat Sep 17 13:19:25 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_ioctl.c (n_tty_ioctl): Fix TIOCGLCKTRMIOS and
-		TIOCSLCKTRMIOS, which were totally broken.  Remove
-		extra indirection from argument; it should be a struct
-		termios *, not a struct termios **.
-		&real_tty->termios_locked should have been
-		real_tty->termios_locked.  This caused us to be
-		reading and writing the termios_locked structure to
-		random places in kernel memory.  
-
-	* tty_io.c (release_dev): Oops!  Forgot to delete a critical kfree
-		of the locked_termios.  This leaves the locked_termios
-		structure pointed at a freed object.  
-
-Fri Sep 16 08:13:25 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* tty_io.c (tty_open): Don't check for an exclusive open until
-		after the device specific open routine has been called.
-		Otherwise, the serial device ref counting will be screwed
-		up.
-
-	* serial.c (rs_open, block_til_ready): Don't set termios structure
-		until after block_til_ready has returned successfully.
-		Modify block_til_ready to check the normal_termios
-		structure directly, so it doesn't rely on termios being
-		set before it's called.
-
-Thu Sep 15 23:34:01 1994  Theodore Y. Ts'o  (tytso@rt-11)
-
-	* serial.c (rs_close): Turn off interrupts during rs_close() to
-		prevent a race condition with the hangup code (which
-		runs during a software interrupt).
-
-	* tty_io.c (release_dev): Don't free the locked_termios structure;
-		its state must be retained across device opens.
-
-
-	* tty_io.c (tty_unregister_driver): Added function to unregister a
-		tty driver.  (For loadable device drivers.)
-
-
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 2fb3a48..4b66c69 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -57,7 +57,7 @@
 
 config AGP_AMD64
 	tristate "AMD Opteron/Athlon64 on-CPU GART support"
-	depends on AGP && X86
+	depends on AGP && X86 && K8_NB
 	help
 	  This option gives you AGP support for the GLX component of
 	  X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 919a285..a3e10dc 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -298,7 +298,7 @@
 			j++;
 		}
 	} else {
-		/* sg may merge pages, but we have to seperate
+		/* sg may merge pages, but we have to separate
 		 * per-page addr for GTT */
 		unsigned int len, m;
 
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index fe2cb2f..a7424bf 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -14,7 +14,7 @@
 /* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter  */
 /* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3    */
 /* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes       */
-/* adresses de base des cartes, IOCTL 6 plus complet                         */
+/* addresses de base des cartes, IOCTL 6 plus complet                         */
 /* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification  */
 /* de code autre que le texte V2.6.1 en V2.8.0                               */
 /*****************************************************************************/
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index fd02426..21c5495 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -353,7 +353,7 @@
 
 	if (!hvlpevent_is_int(event)) {
 		printk(KERN_WARNING
-			"hvc: got unexpected close acknowlegement\n");
+			"hvc: got unexpected close acknowledgement\n");
 		return;
 	}
 
diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c
index 21681a8..37b0542 100644
--- a/drivers/char/hvc_iucv.c
+++ b/drivers/char/hvc_iucv.c
@@ -139,6 +139,8 @@
  *
  * This function allocates a new struct iucv_tty_buffer element and, optionally,
  * allocates an internal data buffer with the specified size @size.
+ * The internal data buffer is always allocated with GFP_DMA which is
+ * required for receiving and sending data with IUCV.
  * Note: The total message size arises from the internal buffer size and the
  *	 members of the iucv_tty_msg structure.
  * The function returns NULL if memory allocation has failed.
@@ -154,7 +156,7 @@
 
 	if (size > 0) {
 		bufp->msg.length = MSG_SIZE(size);
-		bufp->mbuf = kmalloc(bufp->msg.length, flags);
+		bufp->mbuf = kmalloc(bufp->msg.length, flags | GFP_DMA);
 		if (!bufp->mbuf) {
 			mempool_free(bufp, hvc_iucv_mempool);
 			return NULL;
@@ -237,7 +239,7 @@
 	if (!rb->mbuf) { /* message not yet received ... */
 		/* allocate mem to store msg data; if no memory is available
 		 * then leave the buffer on the list and re-try later */
-		rb->mbuf = kmalloc(rb->msg.length, GFP_ATOMIC);
+		rb->mbuf = kmalloc(rb->msg.length, GFP_ATOMIC | GFP_DMA);
 		if (!rb->mbuf)
 			return -ENOMEM;
 
diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c
index 9b3e09c..10f868e 100644
--- a/drivers/char/hw_random/n2-drv.c
+++ b/drivers/char/hw_random/n2-drv.c
@@ -71,7 +71,7 @@
  *        x22 + x21 + x17 + x15 + x13 + x12 + x11 + x7 + x5 + x + 1
  *
  * The RNG_CTL_VCO value of each noise cell must be programmed
- * seperately.  This is why 4 control register values must be provided
+ * separately.  This is why 4 control register values must be provided
  * to the hypervisor.  During a write, the hypervisor writes them all,
  * one at a time, to the actual RNG_CTL register.  The first three
  * values are used to setup the desired RNG_CTL_VCO for each entropy
diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h
index 8aa6e7a..c0ba6c0 100644
--- a/drivers/char/ip2/i2hw.h
+++ b/drivers/char/ip2/i2hw.h
@@ -559,7 +559,7 @@
 
 2) It may be hard-coded into your source by including a .h file (typically
 	supplied by Computone), which declares a data array and initializes every
-	element. This acheives the same result as if an entire loadware file had 
+	element. This achieves the same result as if an entire loadware file had 
 	been read into the array.
 
 	This requires more data space in your program, but access to the file system
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 176f175..4462b11 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -295,6 +295,9 @@
 static int force_kipmid[SI_MAX_PARMS];
 static int num_force_kipmid;
 
+static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
+static int num_max_busy_us;
+
 static int unload_when_empty = 1;
 
 static int try_smi_init(struct smi_info *smi);
@@ -925,23 +928,77 @@
 	}
 }
 
+/*
+ * Use -1 in the nsec value of the busy waiting timespec to tell that
+ * we are spinning in kipmid looking for something and not delaying
+ * between checks
+ */
+static inline void ipmi_si_set_not_busy(struct timespec *ts)
+{
+	ts->tv_nsec = -1;
+}
+static inline int ipmi_si_is_busy(struct timespec *ts)
+{
+	return ts->tv_nsec != -1;
+}
+
+static int ipmi_thread_busy_wait(enum si_sm_result smi_result,
+				 const struct smi_info *smi_info,
+				 struct timespec *busy_until)
+{
+	unsigned int max_busy_us = 0;
+
+	if (smi_info->intf_num < num_max_busy_us)
+		max_busy_us = kipmid_max_busy_us[smi_info->intf_num];
+	if (max_busy_us == 0 || smi_result != SI_SM_CALL_WITH_DELAY)
+		ipmi_si_set_not_busy(busy_until);
+	else if (!ipmi_si_is_busy(busy_until)) {
+		getnstimeofday(busy_until);
+		timespec_add_ns(busy_until, max_busy_us*NSEC_PER_USEC);
+	} else {
+		struct timespec now;
+		getnstimeofday(&now);
+		if (unlikely(timespec_compare(&now, busy_until) > 0)) {
+			ipmi_si_set_not_busy(busy_until);
+			return 0;
+		}
+	}
+	return 1;
+}
+
+
+/*
+ * A busy-waiting loop for speeding up IPMI operation.
+ *
+ * Lousy hardware makes this hard.  This is only enabled for systems
+ * that are not BT and do not have interrupts.  It starts spinning
+ * when an operation is complete or until max_busy tells it to stop
+ * (if that is enabled).  See the paragraph on kimid_max_busy_us in
+ * Documentation/IPMI.txt for details.
+ */
 static int ipmi_thread(void *data)
 {
 	struct smi_info *smi_info = data;
 	unsigned long flags;
 	enum si_sm_result smi_result;
+	struct timespec busy_until;
 
+	ipmi_si_set_not_busy(&busy_until);
 	set_user_nice(current, 19);
 	while (!kthread_should_stop()) {
+		int busy_wait;
+
 		spin_lock_irqsave(&(smi_info->si_lock), flags);
 		smi_result = smi_event_handler(smi_info, 0);
 		spin_unlock_irqrestore(&(smi_info->si_lock), flags);
+		busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
+						  &busy_until);
 		if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
 			; /* do nothing */
-		else if (smi_result == SI_SM_CALL_WITH_DELAY)
+		else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
 			schedule();
 		else
-			schedule_timeout_interruptible(1);
+			schedule_timeout_interruptible(0);
 	}
 	return 0;
 }
@@ -1144,7 +1201,7 @@
 static unsigned int num_regsizes;
 static int           regshifts[SI_MAX_PARMS];
 static unsigned int num_regshifts;
-static int slave_addrs[SI_MAX_PARMS];
+static int slave_addrs[SI_MAX_PARMS]; /* Leaving 0 chooses the default value */
 static unsigned int num_slave_addrs;
 
 #define IPMI_IO_ADDR_SPACE  0
@@ -1212,6 +1269,11 @@
 MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
 		 " specified or found, default is 1.  Setting to 0"
 		 " is useful for hot add of devices using hotmod.");
+module_param_array(kipmid_max_busy_us, uint, &num_max_busy_us, 0644);
+MODULE_PARM_DESC(kipmid_max_busy_us,
+		 "Max time (in microseconds) to busy-wait for IPMI data before"
+		 " sleeping. 0 (default) means to wait forever. Set to 100-500"
+		 " if kipmid is using up a lot of CPU time.");
 
 
 static void std_irq_cleanup(struct smi_info *info)
@@ -1607,7 +1669,7 @@
 		regsize = 1;
 		regshift = 0;
 		irq = 0;
-		ipmb = 0x20;
+		ipmb = 0; /* Choose the default if not specified */
 
 		next = strchr(curr, ':');
 		if (next) {
@@ -1799,6 +1861,7 @@
 		info->irq = irqs[i];
 		if (info->irq)
 			info->irq_setup = std_irq_setup;
+		info->slave_addr = slave_addrs[i];
 
 		try_smi_init(info);
 	}
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 48788db..1f3215a 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 1991, 1992  Linus Torvalds
  *
- *  Added devfs support. 
+ *  Added devfs support.
  *    Jan-11-1998, C. Scott Ananian <cananian@alumni.princeton.edu>
  *  Shared /dev/zero mmapping support, Feb 2000, Kanoj Sarcar <kanoj@sgi.com>
  */
@@ -44,36 +44,6 @@
 	return min(sz, size);
 }
 
-/*
- * Architectures vary in how they handle caching for addresses
- * outside of main memory.
- *
- */
-static inline int uncached_access(struct file *file, unsigned long addr)
-{
-#if defined(CONFIG_IA64)
-	/*
-	 * On ia64, we ignore O_DSYNC because we cannot tolerate memory attribute aliases.
-	 */
-	return !(efi_mem_attributes(addr) & EFI_MEMORY_WB);
-#elif defined(CONFIG_MIPS)
-	{
-		extern int __uncached_access(struct file *file,
-					     unsigned long addr);
-
-		return __uncached_access(file, addr);
-	}
-#else
-	/*
-	 * Accessing memory above the top the kernel knows about or through a file pointer
-	 * that was marked O_DSYNC will be done non-cached.
-	 */
-	if (file->f_flags & O_DSYNC)
-		return 1;
-	return addr >= __pa(high_memory);
-#endif
-}
-
 #ifndef ARCH_HAS_VALID_PHYS_ADDR_RANGE
 static inline int valid_phys_addr_range(unsigned long addr, size_t count)
 {
@@ -115,15 +85,15 @@
 }
 #endif
 
-void __attribute__((weak)) unxlate_dev_mem_ptr(unsigned long phys, void *addr)
+void __weak unxlate_dev_mem_ptr(unsigned long phys, void *addr)
 {
 }
 
 /*
- * This funcion reads the *physical* memory. The f_pos points directly to the 
- * memory location. 
+ * This funcion reads the *physical* memory. The f_pos points directly to the
+ * memory location.
  */
-static ssize_t read_mem(struct file * file, char __user * buf,
+static ssize_t read_mem(struct file *file, char __user *buf,
 			size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
@@ -140,10 +110,10 @@
 		if (sz > 0) {
 			if (clear_user(buf, sz))
 				return -EFAULT;
-			buf += sz; 
-			p += sz; 
-			count -= sz; 
-			read += sz; 
+			buf += sz;
+			p += sz;
+			count -= sz;
+			read += sz;
 		}
 	}
 #endif
@@ -157,9 +127,9 @@
 			return -EPERM;
 
 		/*
-		 * On ia64 if a page has been mapped somewhere as
-		 * uncached, then it must also be accessed uncached
-		 * by the kernel or data corruption may occur
+		 * On ia64 if a page has been mapped somewhere as uncached, then
+		 * it must also be accessed uncached by the kernel or data
+		 * corruption may occur.
 		 */
 		ptr = xlate_dev_mem_ptr(p);
 		if (!ptr)
@@ -180,7 +150,7 @@
 	return read;
 }
 
-static ssize_t write_mem(struct file * file, const char __user * buf, 
+static ssize_t write_mem(struct file *file, const char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
@@ -212,9 +182,9 @@
 			return -EPERM;
 
 		/*
-		 * On ia64 if a page has been mapped somewhere as
-		 * uncached, then it must also be accessed uncached
-		 * by the kernel or data corruption may occur
+		 * On ia64 if a page has been mapped somewhere as uncached, then
+		 * it must also be accessed uncached by the kernel or data
+		 * corruption may occur.
 		 */
 		ptr = xlate_dev_mem_ptr(p);
 		if (!ptr) {
@@ -242,13 +212,46 @@
 	return written;
 }
 
-int __attribute__((weak)) phys_mem_access_prot_allowed(struct file *file,
+int __weak phys_mem_access_prot_allowed(struct file *file,
 	unsigned long pfn, unsigned long size, pgprot_t *vma_prot)
 {
 	return 1;
 }
 
 #ifndef __HAVE_PHYS_MEM_ACCESS_PROT
+
+/*
+ * Architectures vary in how they handle caching for addresses
+ * outside of main memory.
+ *
+ */
+static int uncached_access(struct file *file, unsigned long addr)
+{
+#if defined(CONFIG_IA64)
+	/*
+	 * On ia64, we ignore O_DSYNC because we cannot tolerate memory
+	 * attribute aliases.
+	 */
+	return !(efi_mem_attributes(addr) & EFI_MEMORY_WB);
+#elif defined(CONFIG_MIPS)
+	{
+		extern int __uncached_access(struct file *file,
+					     unsigned long addr);
+
+		return __uncached_access(file, addr);
+	}
+#else
+	/*
+	 * Accessing memory above the top the kernel knows about or through a
+	 * file pointer
+	 * that was marked O_DSYNC will be done non-cached.
+	 */
+	if (file->f_flags & O_DSYNC)
+		return 1;
+	return addr >= __pa(high_memory);
+#endif
+}
+
 static pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				     unsigned long size, pgprot_t vma_prot)
 {
@@ -294,7 +297,7 @@
 #endif
 };
 
-static int mmap_mem(struct file * file, struct vm_area_struct * vma)
+static int mmap_mem(struct file *file, struct vm_area_struct *vma)
 {
 	size_t size = vma->vm_end - vma->vm_start;
 
@@ -329,7 +332,7 @@
 }
 
 #ifdef CONFIG_DEVKMEM
-static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
+static int mmap_kmem(struct file *file, struct vm_area_struct *vma)
 {
 	unsigned long pfn;
 
@@ -337,9 +340,9 @@
 	pfn = __pa((u64)vma->vm_pgoff << PAGE_SHIFT) >> PAGE_SHIFT;
 
 	/*
-	 * RED-PEN: on some architectures there is more mapped memory
-	 * than available in mem_map which pfn_valid checks
-	 * for. Perhaps should add a new macro here.
+	 * RED-PEN: on some architectures there is more mapped memory than
+	 * available in mem_map which pfn_valid checks for. Perhaps should add a
+	 * new macro here.
 	 *
 	 * RED-PEN: vmalloc is not supported right now.
 	 */
@@ -389,7 +392,7 @@
 /*
  * This function reads the *virtual* memory as seen by the kernel.
  */
-static ssize_t read_kmem(struct file *file, char __user *buf, 
+static ssize_t read_kmem(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
@@ -400,8 +403,8 @@
 	read = 0;
 	if (p < (unsigned long) high_memory) {
 		low_count = count;
-		if (count > (unsigned long) high_memory - p)
-			low_count = (unsigned long) high_memory - p;
+		if (count > (unsigned long)high_memory - p)
+			low_count = (unsigned long)high_memory - p;
 
 #ifdef __ARCH_HAS_NO_PAGE_ZERO_MAPPED
 		/* we don't have page 0 mapped on sparc and m68k.. */
@@ -465,9 +468,8 @@
 }
 
 
-static inline ssize_t
-do_write_kmem(unsigned long p, const char __user *buf,
-	      size_t count, loff_t *ppos)
+static ssize_t do_write_kmem(unsigned long p, const char __user *buf,
+				size_t count, loff_t *ppos)
 {
 	ssize_t written, sz;
 	unsigned long copied;
@@ -491,9 +493,9 @@
 		sz = size_inside_page(p, count);
 
 		/*
-		 * On ia64 if a page has been mapped somewhere as
-		 * uncached, then it must also be accessed uncached
-		 * by the kernel or data corruption may occur
+		 * On ia64 if a page has been mapped somewhere as uncached, then
+		 * it must also be accessed uncached by the kernel or data
+		 * corruption may occur.
 		 */
 		ptr = xlate_dev_kmem_ptr((char *)p);
 
@@ -514,11 +516,10 @@
 	return written;
 }
 
-
 /*
  * This function writes to the *virtual* memory as seen by the kernel.
  */
-static ssize_t write_kmem(struct file * file, const char __user * buf, 
+static ssize_t write_kmem(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
@@ -570,17 +571,17 @@
 #endif
 
 #ifdef CONFIG_DEVPORT
-static ssize_t read_port(struct file * file, char __user * buf,
+static ssize_t read_port(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	unsigned long i = *ppos;
 	char __user *tmp = buf;
 
 	if (!access_ok(VERIFY_WRITE, buf, count))
-		return -EFAULT; 
+		return -EFAULT;
 	while (count-- > 0 && i < 65536) {
-		if (__put_user(inb(i),tmp) < 0) 
-			return -EFAULT;  
+		if (__put_user(inb(i), tmp) < 0)
+			return -EFAULT;
 		i++;
 		tmp++;
 	}
@@ -588,22 +589,22 @@
 	return tmp-buf;
 }
 
-static ssize_t write_port(struct file * file, const char __user * buf,
+static ssize_t write_port(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	unsigned long i = *ppos;
 	const char __user * tmp = buf;
 
-	if (!access_ok(VERIFY_READ,buf,count))
+	if (!access_ok(VERIFY_READ, buf, count))
 		return -EFAULT;
 	while (count-- > 0 && i < 65536) {
 		char c;
 		if (__get_user(c, tmp)) {
 			if (tmp > buf)
 				break;
-			return -EFAULT; 
+			return -EFAULT;
 		}
-		outb(c,i);
+		outb(c, i);
 		i++;
 		tmp++;
 	}
@@ -612,13 +613,13 @@
 }
 #endif
 
-static ssize_t read_null(struct file * file, char __user * buf,
+static ssize_t read_null(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	return 0;
 }
 
-static ssize_t write_null(struct file * file, const char __user * buf,
+static ssize_t write_null(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	return count;
@@ -630,13 +631,13 @@
 	return sd->len;
 }
 
-static ssize_t splice_write_null(struct pipe_inode_info *pipe,struct file *out,
+static ssize_t splice_write_null(struct pipe_inode_info *pipe, struct file *out,
 				 loff_t *ppos, size_t len, unsigned int flags)
 {
 	return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_null);
 }
 
-static ssize_t read_zero(struct file * file, char __user * buf, 
+static ssize_t read_zero(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	size_t written;
@@ -667,7 +668,7 @@
 	return written ? written : -EFAULT;
 }
 
-static int mmap_zero(struct file * file, struct vm_area_struct * vma)
+static int mmap_zero(struct file *file, struct vm_area_struct *vma)
 {
 #ifndef CONFIG_MMU
 	return -ENOSYS;
@@ -677,7 +678,7 @@
 	return 0;
 }
 
-static ssize_t write_full(struct file * file, const char __user * buf,
+static ssize_t write_full(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	return -ENOSPC;
@@ -688,8 +689,7 @@
  * can fopen() both devices with "a" now.  This was previously impossible.
  * -- SRB.
  */
-
-static loff_t null_lseek(struct file * file, loff_t offset, int orig)
+static loff_t null_lseek(struct file *file, loff_t offset, int orig)
 {
 	return file->f_pos = 0;
 }
@@ -702,24 +702,31 @@
  * also note that seeking relative to the "end of file" isn't supported:
  * it has no meaning, so it returns -EINVAL.
  */
-static loff_t memory_lseek(struct file * file, loff_t offset, int orig)
+static loff_t memory_lseek(struct file *file, loff_t offset, int orig)
 {
 	loff_t ret;
 
 	mutex_lock(&file->f_path.dentry->d_inode->i_mutex);
 	switch (orig) {
-		case 0:
-			file->f_pos = offset;
-			ret = file->f_pos;
-			force_successful_syscall_return();
+	case SEEK_CUR:
+		offset += file->f_pos;
+		if ((unsigned long long)offset <
+		    (unsigned long long)file->f_pos) {
+			ret = -EOVERFLOW;
 			break;
-		case 1:
-			file->f_pos += offset;
-			ret = file->f_pos;
-			force_successful_syscall_return();
+		}
+	case SEEK_SET:
+		/* to avoid userland mistaking f_pos=-9 as -EBADF=-9 */
+		if ((unsigned long long)offset >= ~0xFFFULL) {
+			ret = -EOVERFLOW;
 			break;
-		default:
-			ret = -EINVAL;
+		}
+		file->f_pos = offset;
+		ret = file->f_pos;
+		force_successful_syscall_return();
+		break;
+	default:
+		ret = -EINVAL;
 	}
 	mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
 	return ret;
@@ -803,7 +810,7 @@
 };
 #endif
 
-static ssize_t kmsg_write(struct file * file, const char __user * buf,
+static ssize_t kmsg_write(struct file *file, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
 	char *tmp;
@@ -825,7 +832,7 @@
 }
 
 static const struct file_operations kmsg_fops = {
-	.write =	kmsg_write,
+	.write = kmsg_write,
 };
 
 static const struct memdev {
@@ -876,7 +883,7 @@
 }
 
 static const struct file_operations memory_fops = {
-	.open		= memory_open,
+	.open = memory_open,
 };
 
 static char *mem_devnode(struct device *dev, mode_t *mode)
@@ -897,7 +904,7 @@
 	if (err)
 		return err;
 
-	if (register_chrdev(MEM_MAJOR,"mem",&memory_fops))
+	if (register_chrdev(MEM_MAJOR, "mem", &memory_fops))
 		printk("unable to get major %d for memory devs\n", MEM_MAJOR);
 
 	mem_class = class_create(THIS_MODULE, "mem");
diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c
index 918711a..04fd0d8 100644
--- a/drivers/char/mmtimer.c
+++ b/drivers/char/mmtimer.c
@@ -546,7 +546,7 @@
 {
 	int nodeid = data;
 	struct mmtimer_node *mn = &timers[nodeid];
-	struct mmtimer *x = rb_entry(mn->next, struct mmtimer, list);
+	struct mmtimer *x;
 	struct k_itimer *t;
 	unsigned long flags;
 
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 2e50f4df..bdae832 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -48,6 +48,7 @@
 #include <linux/audit.h>
 #include <linux/file.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 
 #include <asm/system.h>
 
@@ -2091,3 +2092,19 @@
 	.receive_buf     = n_tty_receive_buf,
 	.write_wakeup    = n_tty_write_wakeup
 };
+
+/**
+ *	n_tty_inherit_ops	-	inherit N_TTY methods
+ *	@ops: struct tty_ldisc_ops where to save N_TTY methods
+ *
+ *	Used by a generic struct tty_ldisc_ops to easily inherit N_TTY
+ *	methods.
+ */
+
+void n_tty_inherit_ops(struct tty_ldisc_ops *ops)
+{
+	*ops = tty_ldisc_N_TTY;
+	ops->owner = NULL;
+	ops->refcount = ops->flags = 0;
+}
+EXPORT_SYMBOL_GPL(n_tty_inherit_ops);
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 385c44b..5ee4248 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -220,7 +220,7 @@
  *	@tty: tty being resized
  *	@ws: window size being set.
  *
- *	Update the termios variables and send the neccessary signals to
+ *	Update the termios variables and send the necessary signals to
  *	peform a terminal resize correctly
  */
 
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 2849713..2fd3d39 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1191,7 +1191,7 @@
 void generate_random_uuid(unsigned char uuid_out[16])
 {
 	get_random_bytes(uuid_out, 16);
-	/* Set UUID version to 4 --- truely random generation */
+	/* Set UUID version to 4 --- truly random generation */
 	uuid_out[6] = (uuid_out[6] & 0x0F) | 0x40;
 	/* Set the UUID variant to DCE */
 	uuid_out[8] = (uuid_out[8] & 0x3F) | 0x80;
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 986aa60..1ec3d5c 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -1989,7 +1989,7 @@
 	/*
 	 * Attempt to set up all channels to something reasonable, and
 	 * bang out a INIT_CHAN command.  We should then be able to limit
-	 * the ammount of fiddling we have to do in normal running.
+	 * the amount of fiddling we have to do in normal running.
 	 */
 
 	for (ch = 3; ch >= 0; ch--) {
diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c
index ac16fbe..283a15b 100644
--- a/drivers/char/tty_audit.c
+++ b/drivers/char/tty_audit.c
@@ -148,7 +148,6 @@
 	spin_lock_irq(&current->sighand->siglock);
 	sig->audit_tty = current->signal->audit_tty;
 	spin_unlock_irq(&current->sighand->siglock);
-	sig->tty_audit_buf = NULL;
 }
 
 /**
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index dcb9083..a42c466 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -2028,7 +2028,7 @@
  *	@rows: rows (character)
  *	@cols: cols (character)
  *
- *	Update the termios variables and send the neccessary signals to
+ *	Update the termios variables and send the necessary signals to
  *	peform a terminal resize correctly
  */
 
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 50faa1f..bd1d116 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -821,7 +821,7 @@
  *
  *	Resize a virtual console, clipping according to the actual constraints.
  *	If the caller passes a tty structure then update the termios winsize
- *	information and perform any neccessary signal handling.
+ *	information and perform any necessary signal handling.
  *
  *	Caller must hold the console semaphore. Takes the termios mutex and
  *	ctrl_lock of the tty IFF a tty is passed.
@@ -2119,8 +2119,6 @@
 	uint8_t inverse;
 	uint8_t width;
 	u16 himask, charmask;
-	const unsigned char *orig_buf = NULL;
-	int orig_count;
 
 	if (in_interrupt())
 		return count;
@@ -2142,8 +2140,6 @@
 	    release_console_sem();
 	    return 0;
 	}
-	orig_buf = buf;
-	orig_count = count;
 
 	himask = vc->vc_hi_font_mask;
 	charmask = himask ? 0x1ff : 0xff;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 67bc2ec..2d5d575 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -766,7 +766,7 @@
 	complete(&policy->kobj_unregister);
 }
 
-static struct sysfs_ops sysfs_ops = {
+static const struct sysfs_ops sysfs_ops = {
 	.show	= show,
 	.store	= store,
 };
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 97b0038..8719b36 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -22,6 +22,7 @@
 __setup("cpuidle_sysfs_switch", cpuidle_sysfs_setup);
 
 static ssize_t show_available_governors(struct sysdev_class *class,
+					struct sysdev_class_attribute *attr,
 					char *buf)
 {
 	ssize_t i = 0;
@@ -41,6 +42,7 @@
 }
 
 static ssize_t show_current_driver(struct sysdev_class *class,
+				   struct sysdev_class_attribute *attr,
 				   char *buf)
 {
 	ssize_t ret;
@@ -56,6 +58,7 @@
 }
 
 static ssize_t show_current_governor(struct sysdev_class *class,
+				     struct sysdev_class_attribute *attr,
 				     char *buf)
 {
 	ssize_t ret;
@@ -71,6 +74,7 @@
 }
 
 static ssize_t store_current_governor(struct sysdev_class *class,
+				      struct sysdev_class_attribute *attr,
 				      const char *buf, size_t count)
 {
 	char gov_name[CPUIDLE_NAME_LEN];
@@ -191,7 +195,7 @@
 	return ret;
 }
 
-static struct sysfs_ops cpuidle_sysfs_ops = {
+static const struct sysfs_ops cpuidle_sysfs_ops = {
 	.show = cpuidle_show,
 	.store = cpuidle_store,
 };
@@ -277,7 +281,7 @@
 	return ret;
 }
 
-static struct sysfs_ops cpuidle_state_sysfs_ops = {
+static const struct sysfs_ops cpuidle_state_sysfs_ops = {
 	.show = cpuidle_state_show,
 };
 
diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c
index 09ad915..73e8b17 100644
--- a/drivers/crypto/hifn_795x.c
+++ b/drivers/crypto/hifn_795x.c
@@ -321,7 +321,7 @@
 #define	HIFN_PUBOPLEN_MOD_M	0x0000007f	/* modulus length mask */
 #define	HIFN_PUBOPLEN_MOD_S	0		/* modulus length shift */
 #define	HIFN_PUBOPLEN_EXP_M	0x0003ff80	/* exponent length mask */
-#define	HIFN_PUBOPLEN_EXP_S	7		/* exponent lenght shift */
+#define	HIFN_PUBOPLEN_EXP_S	7		/* exponent length shift */
 #define	HIFN_PUBOPLEN_RED_M	0x003c0000	/* reducend length mask */
 #define	HIFN_PUBOPLEN_RED_S	18		/* reducend length shift */
 
diff --git a/drivers/dma/coh901318_lli.h b/drivers/dma/coh901318_lli.h
index 7bf713b..7a5c809 100644
--- a/drivers/dma/coh901318_lli.h
+++ b/drivers/dma/coh901318_lli.h
@@ -30,7 +30,7 @@
  * @pool: pool handle
  * @dev: dma device
  * @lli_nbr: number of lli:s in the pool
- * @algin: adress alignemtn of lli:s
+ * @algin: address alignemtn of lli:s
  * returns 0 on success otherwise none zero
  */
 int coh901318_pool_create(struct coh901318_pool *pool,
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index af14c9a..0099340 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -1138,7 +1138,7 @@
 	return entry->show(&chan->common, page);
 }
 
-struct sysfs_ops ioat_sysfs_ops = {
+const struct sysfs_ops ioat_sysfs_ops = {
 	.show	= ioat_attr_show,
 };
 
diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
index 4f747a2..86b97ac 100644
--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -346,7 +346,7 @@
 			   unsigned long *phys_complete);
 void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type);
 void ioat_kobject_del(struct ioatdma_device *device);
-extern struct sysfs_ops ioat_sysfs_ops;
+extern const struct sysfs_ops ioat_sysfs_ops;
 extern struct ioat_sysfs_entry ioat_version_attr;
 extern struct ioat_sysfs_entry ioat_cap_attr;
 #endif /* IOATDMA_H */
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index d205d49..243e9aa 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -75,6 +75,14 @@
 #define E752X_NR_CSROWS		8	/* number of csrows */
 
 /* E752X register addresses - device 0 function 0 */
+#define E752X_MCHSCRB		0x52	/* Memory Scrub register (16b) */
+					/*
+					 * 6:5     Scrub Completion Count
+					 * 3:2     Scrub Rate (i3100 only)
+					 *      01=fast 10=normal
+					 * 1:0     Scrub Mode enable
+					 *      00=off 10=on
+					 */
 #define E752X_DRB		0x60	/* DRAM row boundary register (8b) */
 #define E752X_DRA		0x70	/* DRAM row attribute register (8b) */
 					/*
@@ -240,6 +248,41 @@
 		.ctl_name = "3100"},
 };
 
+/* Valid scrub rates for the e752x/3100 hardware memory scrubber. We
+ * map the scrubbing bandwidth to a hardware register value. The 'set'
+ * operation finds the 'matching or higher value'.  Note that scrubbing
+ * on the e752x can only be enabled/disabled.  The 3100 supports
+ * a normal and fast mode.
+ */
+
+#define SDRATE_EOT 0xFFFFFFFF
+
+struct scrubrate {
+	u32 bandwidth;	/* bandwidth consumed by scrubbing in bytes/sec */
+	u16 scrubval;	/* register value for scrub rate */
+};
+
+/* Rate below assumes same performance as i3100 using PC3200 DDR2 in
+ * normal mode.  e752x bridges don't support choosing normal or fast mode,
+ * so the scrubbing bandwidth value isn't all that important - scrubbing is
+ * either on or off.
+ */
+static const struct scrubrate scrubrates_e752x[] = {
+	{0,		0x00},	/* Scrubbing Off */
+	{500000,	0x02},	/* Scrubbing On */
+	{SDRATE_EOT,	0x00}	/* End of Table */
+};
+
+/* Fast mode: 2 GByte PC3200 DDR2 scrubbed in 33s = 63161283 bytes/s
+ * Normal mode: 125 (32000 / 256) times slower than fast mode.
+ */
+static const struct scrubrate scrubrates_i3100[] = {
+	{0,		0x00},	/* Scrubbing Off */
+	{500000,	0x0a},	/* Normal mode - 32k clocks */
+	{62500000,	0x06},	/* Fast mode - 256 clocks */
+	{SDRATE_EOT,	0x00}	/* End of Table */
+};
+
 static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci,
 				unsigned long page)
 {
@@ -915,6 +958,68 @@
 	e752x_process_error_info(mci, &info, 1);
 }
 
+/* Program byte/sec bandwidth scrub rate to hardware */
+static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *new_bw)
+{
+	const struct scrubrate *scrubrates;
+	struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
+	struct pci_dev *pdev = pvt->dev_d0f0;
+	int i;
+
+	if (pvt->dev_info->ctl_dev == PCI_DEVICE_ID_INTEL_3100_0)
+		scrubrates = scrubrates_i3100;
+	else
+		scrubrates = scrubrates_e752x;
+
+	/* Translate the desired scrub rate to a e752x/3100 register value.
+	 * Search for the bandwidth that is equal or greater than the
+	 * desired rate and program the cooresponding register value.
+	 */
+	for (i = 0; scrubrates[i].bandwidth != SDRATE_EOT; i++)
+		if (scrubrates[i].bandwidth >= *new_bw)
+			break;
+
+	if (scrubrates[i].bandwidth == SDRATE_EOT)
+		return -1;
+
+	pci_write_config_word(pdev, E752X_MCHSCRB, scrubrates[i].scrubval);
+
+	return 0;
+}
+
+/* Convert current scrub rate value into byte/sec bandwidth */
+static int get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
+{
+	const struct scrubrate *scrubrates;
+	struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
+	struct pci_dev *pdev = pvt->dev_d0f0;
+	u16 scrubval;
+	int i;
+
+	if (pvt->dev_info->ctl_dev == PCI_DEVICE_ID_INTEL_3100_0)
+		scrubrates = scrubrates_i3100;
+	else
+		scrubrates = scrubrates_e752x;
+
+	/* Find the bandwidth matching the memory scrubber configuration */
+	pci_read_config_word(pdev, E752X_MCHSCRB, &scrubval);
+	scrubval = scrubval & 0x0f;
+
+	for (i = 0; scrubrates[i].bandwidth != SDRATE_EOT; i++)
+		if (scrubrates[i].scrubval == scrubval)
+			break;
+
+	if (scrubrates[i].bandwidth == SDRATE_EOT) {
+		e752x_printk(KERN_WARNING,
+			"Invalid sdram scrub control value: 0x%x\n", scrubval);
+		return -1;
+	}
+
+	*bw = scrubrates[i].bandwidth;
+
+	return 0;
+}
+
 /* Return 1 if dual channel mode is active.  Else return 0. */
 static inline int dual_channel_active(u16 ddrcsr)
 {
@@ -1073,10 +1178,7 @@
 
 /* Setup system bus parity mask register.
  * Sysbus parity supported on:
- *   e7320/e7520/e7525 + Xeon
- *   i3100 + Xeon/Celeron
- * Sysbus parity not supported on:
- *   i3100 + Pentium M/Celeron M/Core Duo/Core2 Duo
+ * e7320/e7520/e7525 + Xeon
  */
 static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
 {
@@ -1087,10 +1189,7 @@
 	/* Allow module parameter override, else see if CPU supports parity */
 	if (sysbus_parity != -1) {
 		enable = sysbus_parity;
-	} else if (cpu_id[0] &&
-		   ((strstr(cpu_id, "Pentium") && strstr(cpu_id, " M ")) ||
-		    (strstr(cpu_id, "Celeron") && strstr(cpu_id, " M ")) ||
-		    (strstr(cpu_id, "Core") && strstr(cpu_id, "Duo")))) {
+	} else if (cpu_id[0] && !strstr(cpu_id, "Xeon")) {
 		e752x_printk(KERN_INFO, "System Bus Parity not "
 			     "supported by CPU, disabling\n");
 		enable = 0;
@@ -1187,6 +1286,8 @@
 	mci->dev_name = pci_name(pdev);
 	mci->edac_check = e752x_check;
 	mci->ctl_page_to_phys = ctl_page_to_phys;
+	mci->set_sdram_scrub_rate = set_sdram_scrub_rate;
+	mci->get_sdram_scrub_rate = get_sdram_scrub_rate;
 
 	/* set the map type.  1 = normal, 0 = reversed
 	 * Must be set before e752x_init_csrows in case csrow mapping
diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c
index 5376457..5fdedbc 100644
--- a/drivers/edac/edac_device_sysfs.c
+++ b/drivers/edac/edac_device_sysfs.c
@@ -137,7 +137,7 @@
 }
 
 /* edac_dev file operations for an 'ctl_info' */
-static struct sysfs_ops device_ctl_info_ops = {
+static const struct sysfs_ops device_ctl_info_ops = {
 	.show = edac_dev_ctl_info_show,
 	.store = edac_dev_ctl_info_store
 };
@@ -373,7 +373,7 @@
 }
 
 /* edac_dev file operations for an 'instance' */
-static struct sysfs_ops device_instance_ops = {
+static const struct sysfs_ops device_instance_ops = {
 	.show = edac_dev_instance_show,
 	.store = edac_dev_instance_store
 };
@@ -476,7 +476,7 @@
 }
 
 /* edac_dev file operations for a 'block' */
-static struct sysfs_ops device_block_ops = {
+static const struct sysfs_ops device_block_ops = {
 	.show = edac_dev_block_show,
 	.store = edac_dev_block_store
 };
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index e1d4ce0..88840e9 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -245,7 +245,7 @@
 	return -EIO;
 }
 
-static struct sysfs_ops csrowfs_ops = {
+static const struct sysfs_ops csrowfs_ops = {
 	.show = csrowdev_show,
 	.store = csrowdev_store
 };
@@ -575,7 +575,7 @@
 }
 
 /* Intermediate show/store table */
-static struct sysfs_ops mci_ops = {
+static const struct sysfs_ops mci_ops = {
 	.show = mcidev_show,
 	.store = mcidev_store
 };
diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c
index fb60a87..bef94e3 100644
--- a/drivers/edac/edac_pci_sysfs.c
+++ b/drivers/edac/edac_pci_sysfs.c
@@ -121,7 +121,7 @@
 }
 
 /* fs_ops table */
-static struct sysfs_ops pci_instance_ops = {
+static const struct sysfs_ops pci_instance_ops = {
 	.show = edac_pci_instance_show,
 	.store = edac_pci_instance_store
 };
@@ -261,7 +261,7 @@
 	return -EIO;
 }
 
-static struct sysfs_ops edac_pci_sysfs_ops = {
+static const struct sysfs_ops edac_pci_sysfs_ops = {
 	.show = edac_pci_dev_show,
 	.store = edac_pci_dev_store
 };
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index ecd5928..94cac0a 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -239,16 +239,15 @@
 	/* we only need the error registers */
 	r.start += 0xe00;
 
-	if (!devm_request_mem_region(&op->dev, r.start,
-					r.end - r.start + 1, pdata->name)) {
+	if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r),
+					pdata->name)) {
 		printk(KERN_ERR "%s: Error while requesting mem region\n",
 		       __func__);
 		res = -EBUSY;
 		goto err;
 	}
 
-	pdata->pci_vbase = devm_ioremap(&op->dev, r.start,
-					r.end - r.start + 1);
+	pdata->pci_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r));
 	if (!pdata->pci_vbase) {
 		printk(KERN_ERR "%s: Unable to setup PCI err regs\n", __func__);
 		res = -ENOMEM;
@@ -668,15 +667,125 @@
 
 /**************************** MC Err device ***************************/
 
+/*
+ * Taken from table 8-55 in the MPC8641 User's Manual and/or 9-61 in the
+ * MPC8572 User's Manual.  Each line represents a syndrome bit column as a
+ * 64-bit value, but split into an upper and lower 32-bit chunk.  The labels
+ * below correspond to Freescale's manuals.
+ */
+static unsigned int ecc_table[16] = {
+	/* MSB           LSB */
+	/* [0:31]    [32:63] */
+	0xf00fe11e, 0xc33c0ff7,	/* Syndrome bit 7 */
+	0x00ff00ff, 0x00fff0ff,
+	0x0f0f0f0f, 0x0f0fff00,
+	0x11113333, 0x7777000f,
+	0x22224444, 0x8888222f,
+	0x44448888, 0xffff4441,
+	0x8888ffff, 0x11118882,
+	0xffff1111, 0x22221114,	/* Syndrome bit 0 */
+};
+
+/*
+ * Calculate the correct ECC value for a 64-bit value specified by high:low
+ */
+static u8 calculate_ecc(u32 high, u32 low)
+{
+	u32 mask_low;
+	u32 mask_high;
+	int bit_cnt;
+	u8 ecc = 0;
+	int i;
+	int j;
+
+	for (i = 0; i < 8; i++) {
+		mask_high = ecc_table[i * 2];
+		mask_low = ecc_table[i * 2 + 1];
+		bit_cnt = 0;
+
+		for (j = 0; j < 32; j++) {
+			if ((mask_high >> j) & 1)
+				bit_cnt ^= (high >> j) & 1;
+			if ((mask_low >> j) & 1)
+				bit_cnt ^= (low >> j) & 1;
+		}
+
+		ecc |= bit_cnt << i;
+	}
+
+	return ecc;
+}
+
+/*
+ * Create the syndrome code which is generated if the data line specified by
+ * 'bit' failed.  Eg generate an 8-bit codes seen in Table 8-55 in the MPC8641
+ * User's Manual and 9-61 in the MPC8572 User's Manual.
+ */
+static u8 syndrome_from_bit(unsigned int bit) {
+	int i;
+	u8 syndrome = 0;
+
+	/*
+	 * Cycle through the upper or lower 32-bit portion of each value in
+	 * ecc_table depending on if 'bit' is in the upper or lower half of
+	 * 64-bit data.
+	 */
+	for (i = bit < 32; i < 16; i += 2)
+		syndrome |= ((ecc_table[i] >> (bit % 32)) & 1) << (i / 2);
+
+	return syndrome;
+}
+
+/*
+ * Decode data and ecc syndrome to determine what went wrong
+ * Note: This can only decode single-bit errors
+ */
+static void sbe_ecc_decode(u32 cap_high, u32 cap_low, u32 cap_ecc,
+		       int *bad_data_bit, int *bad_ecc_bit)
+{
+	int i;
+	u8 syndrome;
+
+	*bad_data_bit = -1;
+	*bad_ecc_bit = -1;
+
+	/*
+	 * Calculate the ECC of the captured data and XOR it with the captured
+	 * ECC to find an ECC syndrome value we can search for
+	 */
+	syndrome = calculate_ecc(cap_high, cap_low) ^ cap_ecc;
+
+	/* Check if a data line is stuck... */
+	for (i = 0; i < 64; i++) {
+		if (syndrome == syndrome_from_bit(i)) {
+			*bad_data_bit = i;
+			return;
+		}
+	}
+
+	/* If data is correct, check ECC bits for errors... */
+	for (i = 0; i < 8; i++) {
+		if ((syndrome >> i) & 0x1) {
+			*bad_ecc_bit = i;
+			return;
+		}
+	}
+}
+
 static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 {
 	struct mpc85xx_mc_pdata *pdata = mci->pvt_info;
 	struct csrow_info *csrow;
+	u32 bus_width;
 	u32 err_detect;
 	u32 syndrome;
 	u32 err_addr;
 	u32 pfn;
 	int row_index;
+	u32 cap_high;
+	u32 cap_low;
+	int bad_data_bit;
+	int bad_ecc_bit;
 
 	err_detect = in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT);
 	if (!err_detect)
@@ -692,6 +801,15 @@
 	}
 
 	syndrome = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ECC);
+
+	/* Mask off appropriate bits of syndrome based on bus width */
+	bus_width = (in_be32(pdata->mc_vbase + MPC85XX_MC_DDR_SDRAM_CFG) &
+			DSC_DBW_MASK) ? 32 : 64;
+	if (bus_width == 64)
+		syndrome &= 0xff;
+	else
+		syndrome &= 0xffff;
+
 	err_addr = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ADDRESS);
 	pfn = err_addr >> PAGE_SHIFT;
 
@@ -701,14 +819,35 @@
 			break;
 	}
 
-	mpc85xx_mc_printk(mci, KERN_ERR, "Capture Data High: %#8.8x\n",
-			  in_be32(pdata->mc_vbase +
-				  MPC85XX_MC_CAPTURE_DATA_HI));
-	mpc85xx_mc_printk(mci, KERN_ERR, "Capture Data Low: %#8.8x\n",
-			  in_be32(pdata->mc_vbase +
-				  MPC85XX_MC_CAPTURE_DATA_LO));
-	mpc85xx_mc_printk(mci, KERN_ERR, "syndrome: %#8.8x\n", syndrome);
-	mpc85xx_mc_printk(mci, KERN_ERR, "err addr: %#8.8x\n", err_addr);
+	cap_high = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_DATA_HI);
+	cap_low = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_DATA_LO);
+
+	/*
+	 * Analyze single-bit errors on 64-bit wide buses
+	 * TODO: Add support for 32-bit wide buses
+	 */
+	if ((err_detect & DDR_EDE_SBE) && (bus_width == 64)) {
+		sbe_ecc_decode(cap_high, cap_low, syndrome,
+				&bad_data_bit, &bad_ecc_bit);
+
+		if (bad_data_bit != -1)
+			mpc85xx_mc_printk(mci, KERN_ERR,
+				"Faulty Data bit: %d\n", bad_data_bit);
+		if (bad_ecc_bit != -1)
+			mpc85xx_mc_printk(mci, KERN_ERR,
+				"Faulty ECC bit: %d\n", bad_ecc_bit);
+
+		mpc85xx_mc_printk(mci, KERN_ERR,
+			"Expected Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
+			cap_high ^ (1 << (bad_data_bit - 32)),
+			cap_low ^ (1 << bad_data_bit),
+			syndrome ^ (1 << bad_ecc_bit));
+	}
+
+	mpc85xx_mc_printk(mci, KERN_ERR,
+			"Captured Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
+			cap_high, cap_low, syndrome);
+	mpc85xx_mc_printk(mci, KERN_ERR, "Err addr: %#8.8x\n", err_addr);
 	mpc85xx_mc_printk(mci, KERN_ERR, "PFN: %#8.8x\n", pfn);
 
 	/* we are out of range */
diff --git a/drivers/edac/mpc85xx_edac.h b/drivers/edac/mpc85xx_edac.h
index 52432ee..cb24df8 100644
--- a/drivers/edac/mpc85xx_edac.h
+++ b/drivers/edac/mpc85xx_edac.h
@@ -48,6 +48,9 @@
 #define DSC_MEM_EN	0x80000000
 #define DSC_ECC_EN	0x20000000
 #define DSC_RD_EN	0x10000000
+#define DSC_DBW_MASK	0x00180000
+#define DSC_DBW_32	0x00080000
+#define DSC_DBW_64	0x00000000
 
 #define DSC_SDTYPE_MASK		0x07000000
 
diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c
index 014cabd..5db0518 100644
--- a/drivers/firewire/core-device.c
+++ b/drivers/firewire/core-device.c
@@ -33,7 +33,6 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/rwsem.h>
-#include <linux/semaphore.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/workqueue.h>
@@ -828,9 +827,9 @@
 	struct fw_driver *driver = (struct fw_driver *)dev->driver;
 
 	if (is_fw_unit(dev) && driver != NULL && driver->update != NULL) {
-		down(&dev->sem);
+		device_lock(dev);
 		driver->update(unit);
-		up(&dev->sem);
+		device_unlock(dev);
 	}
 
 	return 0;
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 9e4f59dc..110e24e 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -122,7 +122,7 @@
 	return ret;
 }
 
-static struct sysfs_ops edd_attr_ops = {
+static const struct sysfs_ops edd_attr_ops = {
 	.show = edd_attr_show,
 };
 
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index f4f709d..082f06e 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -362,7 +362,7 @@
 	return ret;
 }
 
-static struct sysfs_ops efivar_attr_ops = {
+static const struct sysfs_ops efivar_attr_ops = {
 	.show = efivar_attr_show,
 	.store = efivar_attr_store,
 };
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index a3600e3..ed2801c 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -519,7 +519,7 @@
 	return ret;
 }
 
-static struct sysfs_ops ibft_attr_ops = {
+static const struct sysfs_ops ibft_attr_ops = {
 	.show = ibft_show_attribute,
 };
 
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index 20f6457..d59f7ca 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -74,7 +74,7 @@
 	NULL
 };
 
-static struct sysfs_ops memmap_attr_ops = {
+static const struct sysfs_ops memmap_attr_ops = {
 	.show = memmap_attr_show,
 };
 
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 9006fdb..6d1b866 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -623,7 +623,9 @@
  * /sys/class/gpio/unexport ... write-only
  *	integer N ... number of GPIO to unexport
  */
-static ssize_t export_store(struct class *class, const char *buf, size_t len)
+static ssize_t export_store(struct class *class,
+				struct class_attribute *attr,
+				const char *buf, size_t len)
 {
 	long	gpio;
 	int	status;
@@ -653,7 +655,9 @@
 	return status ? : len;
 }
 
-static ssize_t unexport_store(struct class *class, const char *buf, size_t len)
+static ssize_t unexport_store(struct class *class,
+				struct class_attribute *attr,
+				const char *buf, size_t len)
 {
 	long	gpio;
 	int	status;
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 7e42b7e..014ce24 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -70,19 +70,17 @@
 	return 0;
 }
 
-/* Display the version of drm_core. This doesn't work right in current design */
-static ssize_t version_show(struct class *dev, char *buf)
-{
-	return sprintf(buf, "%s %d.%d.%d %s\n", CORE_NAME, CORE_MAJOR,
-		       CORE_MINOR, CORE_PATCHLEVEL, CORE_DATE);
-}
-
 static char *drm_devnode(struct device *dev, mode_t *mode)
 {
 	return kasprintf(GFP_KERNEL, "dri/%s", dev_name(dev));
 }
 
-static CLASS_ATTR(version, S_IRUGO, version_show, NULL);
+static CLASS_ATTR_STRING(version, S_IRUGO,
+		CORE_NAME " "
+		__stringify(CORE_MAJOR) "."
+		__stringify(CORE_MINOR) "."
+		__stringify(CORE_PATCHLEVEL) " "
+		CORE_DATE);
 
 /**
  * drm_sysfs_create - create a struct drm_sysfs_class structure
@@ -109,7 +107,7 @@
 	class->suspend = drm_class_suspend;
 	class->resume = drm_class_resume;
 
-	err = class_create_file(class, &class_attr_version);
+	err = class_create_file(class, &class_attr_version.attr);
 	if (err)
 		goto err_out_class;
 
@@ -132,7 +130,7 @@
 {
 	if ((drm_class == NULL) || (IS_ERR(drm_class)))
 		return;
-	class_remove_file(drm_class, &class_attr_version);
+	class_remove_file(drm_class, &class_attr_version.attr);
 	class_destroy(drm_class);
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 71247da..75bceee7 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -3545,7 +3545,7 @@
 	 * at which modes should be set up in the dual link style.
 	 *
 	 * Following the header, the BMP (ver 0xa) table has several records,
-	 * indexed by a seperate xlat table, indexed in turn by the fp strap in
+	 * indexed by a separate xlat table, indexed in turn by the fp strap in
 	 * EXTDEV_BOOT. Each record had a config byte, followed by 6 script
 	 * numbers for use by INIT_SUB which controlled panel init and power,
 	 * and finally a dword of ms to sleep between power off and on
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 5f8d987..4b9aaf2 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -553,7 +553,7 @@
 	uint32_t ramro_offset;
 	uint32_t ramro_size;
 
-	/* base physical adresses */
+	/* base physical addresses */
 	uint64_t fb_phys;
 	uint64_t fb_available_size;
 	uint64_t fb_mappable_pages;
diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c
index 3c32f84..40ab6d9 100644
--- a/drivers/gpu/drm/radeon/radeon_state.c
+++ b/drivers/gpu/drm/radeon/radeon_state.c
@@ -1093,7 +1093,7 @@
 					/* judging by the first tile offset needed, could possibly
 					   directly address/clear 4x4 tiles instead of 8x2 * 4x4
 					   macro tiles, though would still need clear mask for
-					   right/bottom if truely 4x4 granularity is desired ? */
+					   right/bottom if truly 4x4 granularity is desired ? */
 					OUT_RING(tileoffset * 16);
 					/* the number of tiles to clear */
 					OUT_RING(nrtilesx + 1);
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index c7320ce..89c38c4 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -128,7 +128,7 @@
 	NULL
 };
 
-static struct sysfs_ops ttm_bo_global_ops = {
+static const struct sysfs_ops ttm_bo_global_ops = {
 	.show = &ttm_bo_global_show
 };
 
diff --git a/drivers/gpu/drm/ttm/ttm_memory.c b/drivers/gpu/drm/ttm/ttm_memory.c
index f5245c0..eb143e0 100644
--- a/drivers/gpu/drm/ttm/ttm_memory.c
+++ b/drivers/gpu/drm/ttm/ttm_memory.c
@@ -152,7 +152,7 @@
 	NULL
 };
 
-static struct sysfs_ops ttm_mem_zone_ops = {
+static const struct sysfs_ops ttm_mem_zone_ops = {
 	.show = &ttm_mem_zone_show,
 	.store = &ttm_mem_zone_store
 };
diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c
index 5935b88..34079f2 100644
--- a/drivers/gpu/drm/via/via_irq.c
+++ b/drivers/gpu/drm/via/via_irq.c
@@ -150,7 +150,7 @@
 		cur_irq++;
 	}
 
-	/* Acknowlege interrupts */
+	/* Acknowledge interrupts */
 	VIA_WRITE(VIA_REG_INTERRUPT, status);
 
 
@@ -165,7 +165,7 @@
 	u32 status;
 
 	if (dev_priv) {
-		/* Acknowlege interrupts */
+		/* Acknowledge interrupts */
 		status = VIA_READ(VIA_REG_INTERRUPT);
 		VIA_WRITE(VIA_REG_INTERRUPT, status |
 			  dev_priv->irq_pending_mask);
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 79d9edd..7a0d2e4 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -68,22 +68,25 @@
 #define map_key_clear(c)	hid_map_usage_clear(hidinput, usage, &bit, \
 		&max, EV_KEY, (c))
 
-static inline int match_scancode(int code, int scancode)
+static inline int match_scancode(unsigned int code, unsigned int scancode)
 {
 	if (scancode == 0)
 		return 1;
-	return ((code & (HID_USAGE_PAGE | HID_USAGE)) == scancode);
+
+	return (code & (HID_USAGE_PAGE | HID_USAGE)) == scancode;
 }
 
-static inline int match_keycode(int code, int keycode)
+static inline int match_keycode(unsigned int code, unsigned int keycode)
 {
 	if (keycode == 0)
 		return 1;
-	return (code == keycode);
+
+	return code == keycode;
 }
 
 static struct hid_usage *hidinput_find_key(struct hid_device *hid,
-		int scancode, int keycode)
+					   unsigned int scancode,
+					   unsigned int keycode)
 {
 	int i, j, k;
 	struct hid_report *report;
@@ -105,8 +108,8 @@
 	return NULL;
 }
 
-static int hidinput_getkeycode(struct input_dev *dev, int scancode,
-				int *keycode)
+static int hidinput_getkeycode(struct input_dev *dev,
+			       unsigned int scancode, unsigned int *keycode)
 {
 	struct hid_device *hid = input_get_drvdata(dev);
 	struct hid_usage *usage;
@@ -119,16 +122,13 @@
 	return -EINVAL;
 }
 
-static int hidinput_setkeycode(struct input_dev *dev, int scancode,
-				int keycode)
+static int hidinput_setkeycode(struct input_dev *dev,
+			       unsigned int scancode, unsigned int keycode)
 {
 	struct hid_device *hid = input_get_drvdata(dev);
 	struct hid_usage *usage;
 	int old_keycode;
 
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
-
 	usage = hidinput_find_key(hid, scancode, 0);
 	if (usage) {
 		old_keycode = usage->code;
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 02ce9cf..d06083f 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -73,7 +73,6 @@
 
 source drivers/i2c/algos/Kconfig
 source drivers/i2c/busses/Kconfig
-source drivers/i2c/chips/Kconfig
 
 config I2C_DEBUG_CORE
 	bool "I2C Core debugging messages"
@@ -98,12 +97,4 @@
 	  a problem with I2C support and want to see more of what is going
 	  on.
 
-config I2C_DEBUG_CHIP
-	bool "I2C Chip debugging messages"
-	help
-	  Say Y here if you want the I2C chip drivers to produce a bunch of
-	  debug messages to the system log.  Select this if you are having
-	  a problem with I2C support and want to see more of what is going
-	  on.
-
 endif # I2C
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index acd0250..a7d9b4be9 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -6,7 +6,7 @@
 obj-$(CONFIG_I2C)		+= i2c-core.o
 obj-$(CONFIG_I2C_SMBUS)		+= i2c-smbus.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
-obj-y				+= busses/ chips/ algos/
+obj-y				+= algos/ busses/
 
 ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index e25e139..e8d568c 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -522,6 +522,12 @@
 	int i, ret;
 	unsigned short nak_ok;
 
+	if (adap->pre_xfer) {
+		ret = adap->pre_xfer(i2c_adap);
+		if (ret < 0)
+			return ret;
+	}
+
 	bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
 	i2c_start(adap);
 	for (i = 0; i < num; i++) {
@@ -570,6 +576,9 @@
 bailout:
 	bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
 	i2c_stop(adap);
+
+	if (adap->post_xfer)
+		adap->post_xfer(i2c_adap);
 	return ret;
 }
 
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 7ce7577..6b6bd06 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -176,7 +176,7 @@
 	 */
 	if (((temp = get_pcf(adap, 1)) & 0x7f) != (0)) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S0 (0x%02x).\n", temp));
-		return -ENXIO; /* definetly not PCF8584 */
+		return -ENXIO; /* definitely not PCF8584 */
 	}
 
 	/* load own address in S0, effective address is (own << 1) */
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 9da5b05..299b918 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -416,9 +416,11 @@
 		data->block[0] = 32;	/* max for SMBus block reads */
 	}
 
+	/* Experience has shown that the block buffer can only be used for
+	   SMBus (not I2C) block transactions, even though the datasheet
+	   doesn't mention this limitation. */
 	if ((i801_features & FEATURE_BLOCK_BUFFER)
-	 && !(command == I2C_SMBUS_I2C_BLOCK_DATA
-	      && read_write == I2C_SMBUS_READ)
+	 && command != I2C_SMBUS_I2C_BLOCK_DATA
 	 && i801_set_block_buffer_mode() == 0)
 		result = i801_block_transaction_by_block(data, read_write,
 							 hwpec);
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 913abd7..c7c23753 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -850,7 +850,7 @@
 	.functionality	= omap_i2c_func,
 };
 
-static int __init
+static int __devinit
 omap_i2c_probe(struct platform_device *pdev)
 {
 	struct omap_i2c_dev	*dev;
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 1c440a7..b289ec9 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -122,9 +122,14 @@
 
 	rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
 	if (rc) {
-		dev_err(&adap->dev,
-			"I2C transfer at 0x%02x failed, size %d, err %d\n",
-			addrdir >> 1, size, rc);
+		if (rc == -ENXIO)
+			dev_dbg(&adap->dev,
+				"I2C transfer at 0x%02x failed, size %d, "
+				"err %d\n", addrdir >> 1, size, rc);
+		else
+			dev_err(&adap->dev,
+				"I2C transfer at 0x%02x failed, size %d, "
+				"err %d\n", addrdir >> 1, size, rc);
 		goto bail;
 	}
 
@@ -175,10 +180,16 @@
 		goto bail;
 	}
 	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
-	if (rc < 0)
-		dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
-			addrdir & 1 ? "read from" : "write to", addrdir >> 1,
-			rc);
+	if (rc < 0) {
+		if (rc == -ENXIO)
+			dev_dbg(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+				addrdir & 1 ? "read from" : "write to",
+				addrdir >> 1, rc);
+		else
+			dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+				addrdir & 1 ? "read from" : "write to",
+				addrdir >> 1, rc);
+	}
  bail:
 	pmac_i2c_close(bus);
 	return rc < 0 ? rc : 1;
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 7647a20..90ffbf6 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -12,7 +12,7 @@
  *
  *  History:
  *    Apr 2002: Initial version [CS]
- *    Jun 2002: Properly seperated algo/adap [FB]
+ *    Jun 2002: Properly separated algo/adap [FB]
  *    Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem]
  *    Jan 2003: added limited signal handling [Kai-Uwe Bloem]
  *    Sep 2004: Major rework to ensure efficient bus handling [RMK]
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index eece39a..f0ef8da 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -32,6 +32,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
deleted file mode 100644
index ae4539d..0000000
--- a/drivers/i2c/chips/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Miscellaneous I2C chip drivers configuration
-#
-# *** DEPRECATED! Do not add new entries! See Makefile ***
-#
-
-menu "Miscellaneous I2C Chip support"
-
-config SENSORS_TSL2550
-	tristate "Taos TSL2550 ambient light sensor"
-	depends on EXPERIMENTAL
-	help
-	  If you say yes here you get support for the Taos TSL2550
-	  ambient light sensor.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called tsl2550.
-
-endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
deleted file mode 100644
index fe0af0f..0000000
--- a/drivers/i2c/chips/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for miscellaneous I2C chip drivers.
-#
-# Do not add new drivers to this directory! It is DEPRECATED.
-#
-# Device drivers are better grouped according to the functionality they
-# implement rather than to the bus they are connected to. In particular:
-# * Hardware monitoring chip drivers go to drivers/hwmon
-# * RTC chip drivers go to drivers/rtc
-# * I/O expander drivers go to drivers/gpio
-#
-
-obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
-
-ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
-
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index 4212782..7a8201e 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -22,7 +22,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/device.h>
-#include <linux/semaphore.h>
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
 #include <linux/i2c.h>
@@ -55,7 +54,7 @@
 	 * Drivers should either disable alerts, or provide at least
 	 * a minimal handler.  Lock so client->driver won't change.
 	 */
-	down(&dev->sem);
+	device_lock(dev);
 	if (client->driver) {
 		if (client->driver->alert)
 			client->driver->alert(client, data->flag);
@@ -63,7 +62,7 @@
 			dev_warn(&client->dev, "no driver alert()!\n");
 	} else
 		dev_dbg(&client->dev, "alert with no driver\n");
-	up(&dev->sem);
+	device_unlock(dev);
 
 	/* Stop iterating after we find the device */
 	return -EBUSY;
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 5122b5a..1835021 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -19,7 +19,6 @@
 #include <linux/moduleparam.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
-#include <linux/semaphore.h>
 #include <asm/atomic.h>
 
 #include "csr.h"
@@ -1397,9 +1396,9 @@
 			pdrv = container_of(drv, struct hpsb_protocol_driver,
 					    driver);
 			if (pdrv->update) {
-				down(&ud->device.sem);
+				device_lock(&ud->device);
 				error = pdrv->update(ud);
-				up(&ud->device.sem);
+				device_unlock(&ud->device);
 			}
 			if (error)
 				device_release_driver(&ud->device);
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index 9555fd2..bf47fee 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -1452,7 +1452,7 @@
                                 PRINT(KERN_ERR, lynx->id, "unable to read bus info block from i2c");
                         } else {
                                 PRINT(KERN_INFO, lynx->id, "got bus info block from serial eeprom");
-				/* FIXME: probably we shoud rewrite the max_rec, max_ROM(1394a),
+				/* FIXME: probably we should rewrite the max_rec, max_ROM(1394a),
 				 * generation(1394a) and link_spd(1394a) field and recalculate
 				 * the CRC */
 
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 5130fc5..764787e 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -3597,7 +3597,7 @@
 		       atomic_long_read(&group->counter[cm_attr->index]));
 }
 
-static struct sysfs_ops cm_counter_ops = {
+static const struct sysfs_ops cm_counter_ops = {
 	.show = cm_show_counter
 };
 
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 58463da..e351b15 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -2953,6 +2953,9 @@
 {
 	int i, num_ports, cur_port;
 
+	if (rdma_node_get_transport(device->node_type) != RDMA_TRANSPORT_IB)
+		return;
+
 	if (device->node_type == RDMA_NODE_IB_SWITCH) {
 		num_ports = 1;
 		cur_port = 0;
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 158a214..1558bb7 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -79,7 +79,7 @@
 	return port_attr->show(p, port_attr, buf);
 }
 
-static struct sysfs_ops port_sysfs_ops = {
+static const struct sysfs_ops port_sysfs_ops = {
 	.show = port_attr_show
 };
 
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index 1b09b73..017d6e2 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -1336,11 +1336,8 @@
 	device_unregister(&ucm_dev->dev);
 }
 
-static ssize_t show_abi_version(struct class *class, char *buf)
-{
-	return sprintf(buf, "%d\n", IB_USER_CM_ABI_VERSION);
-}
-static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL);
+static CLASS_ATTR_STRING(abi_version, S_IRUGO,
+			 __stringify(IB_USER_CM_ABI_VERSION));
 
 static int __init ib_ucm_init(void)
 {
@@ -1353,7 +1350,7 @@
 		goto error1;
 	}
 
-	ret = class_create_file(&cm_class, &class_attr_abi_version);
+	ret = class_create_file(&cm_class, &class_attr_abi_version.attr);
 	if (ret) {
 		printk(KERN_ERR "ucm: couldn't create abi_version attribute\n");
 		goto error2;
@@ -1367,7 +1364,7 @@
 	return 0;
 
 error3:
-	class_remove_file(&cm_class, &class_attr_abi_version);
+	class_remove_file(&cm_class, &class_attr_abi_version.attr);
 error2:
 	unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES);
 error1:
@@ -1377,7 +1374,7 @@
 static void __exit ib_ucm_cleanup(void)
 {
 	ib_unregister_client(&ucm_client);
-	class_remove_file(&cm_class, &class_attr_abi_version);
+	class_remove_file(&cm_class, &class_attr_abi_version.attr);
 	unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES);
 	if (overflow_maj)
 		unregister_chrdev_region(overflow_maj, IB_UCM_MAX_DEVICES);
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 02d360c..04b585e 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -965,11 +965,8 @@
 }
 static DEVICE_ATTR(port, S_IRUGO, show_port, NULL);
 
-static ssize_t show_abi_version(struct class *class, char *buf)
-{
-	return sprintf(buf, "%d\n", IB_USER_MAD_ABI_VERSION);
-}
-static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL);
+static CLASS_ATTR_STRING(abi_version, S_IRUGO,
+			 __stringify(IB_USER_MAD_ABI_VERSION));
 
 static dev_t overflow_maj;
 static DECLARE_BITMAP(overflow_map, IB_UMAD_MAX_PORTS);
@@ -1194,7 +1191,7 @@
 		goto out_chrdev;
 	}
 
-	ret = class_create_file(umad_class, &class_attr_abi_version);
+	ret = class_create_file(umad_class, &class_attr_abi_version.attr);
 	if (ret) {
 		printk(KERN_ERR "user_mad: couldn't create abi_version attribute\n");
 		goto out_class;
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 4fa2e65..d805cf3 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -691,11 +691,8 @@
 }
 static DEVICE_ATTR(abi_version, S_IRUGO, show_dev_abi_version, NULL);
 
-static ssize_t show_abi_version(struct class *class, char *buf)
-{
-	return sprintf(buf, "%d\n", IB_USER_VERBS_ABI_VERSION);
-}
-static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL);
+static CLASS_ATTR_STRING(abi_version, S_IRUGO,
+			 __stringify(IB_USER_VERBS_ABI_VERSION));
 
 static dev_t overflow_maj;
 static DECLARE_BITMAP(overflow_map, IB_UVERBS_MAX_DEVICES);
@@ -841,7 +838,7 @@
 		goto out_chrdev;
 	}
 
-	ret = class_create_file(uverbs_class, &class_attr_abi_version);
+	ret = class_create_file(uverbs_class, &class_attr_abi_version.attr);
 	if (ret) {
 		printk(KERN_ERR "user_verbs: couldn't create abi_version attribute\n");
 		goto out_class;
diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c
index ee1d8b4..63f975f 100644
--- a/drivers/infiniband/hw/cxgb3/iwch.c
+++ b/drivers/infiniband/hw/cxgb3/iwch.c
@@ -189,6 +189,7 @@
 	list_for_each_entry_safe(dev, tmp, &dev_list, entry) {
 		if (dev->rdev.t3cdev_p == tdev) {
 			dev->rdev.flags = CXIO_ERROR_FATAL;
+			synchronize_net();
 			cancel_delayed_work_sync(&dev->db_drop_task);
 			list_del(&dev->entry);
 			iwch_unregister_device(dev);
@@ -217,6 +218,7 @@
 	switch (evt) {
 	case OFFLOAD_STATUS_DOWN: {
 		rdev->flags = CXIO_ERROR_FATAL;
+		synchronize_net();
 		event.event  = IB_EVENT_DEVICE_FATAL;
 		dispatch = 1;
 		break;
diff --git a/drivers/infiniband/hw/ehca/ehca_qes.h b/drivers/infiniband/hw/ehca/ehca_qes.h
index 5d28e3e..90c4efa 100644
--- a/drivers/infiniband/hw/ehca/ehca_qes.h
+++ b/drivers/infiniband/hw/ehca/ehca_qes.h
@@ -46,7 +46,7 @@
 
 #include "ehca_tools.h"
 
-/* virtual scatter gather entry to specify remote adresses with length */
+/* virtual scatter gather entry to specify remote addresses with length */
 struct ehca_vsgentry {
 	u64 vaddr;
 	u32 lkey;
@@ -148,7 +148,7 @@
 	u32 immediate_data;
 	union {
 		struct {
-			u64 remote_virtual_adress;
+			u64 remote_virtual_address;
 			u32 rkey;
 			u32 reserved;
 			u64 atomic_1st_op_dma_len;
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index e3ec7fd..9a3fbfc 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -269,7 +269,7 @@
 		/* no break is intentional here */
 	case IB_QPT_RC:
 		/* TODO: atomic not implemented */
-		wqe_p->u.nud.remote_virtual_adress =
+		wqe_p->u.nud.remote_virtual_address =
 			send_wr->wr.rdma.remote_addr;
 		wqe_p->u.nud.rkey = send_wr->wr.rdma.rkey;
 
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index ce7f538..9250755 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -1899,9 +1899,14 @@
 	u16  wqe_fragment_index;
 	u64 wqe_frag;
 	u32 cqp_head;
+	u32 wqm_cfg0;
 	unsigned long flags;
 	int ret;
 
+	/* clear wqe stall before destroying NIC QP */
+	wqm_cfg0 = nes_read_indexed(nesdev, NES_IDX_WQM_CONFIG0);
+	nes_write_indexed(nesdev, NES_IDX_WQM_CONFIG0, wqm_cfg0 & 0xFFFF7FFF);
+
 	/* Free remaining NIC receive buffers */
 	while (nesvnic->nic.rq_head != nesvnic->nic.rq_tail) {
 		nic_rqe   = &nesvnic->nic.rq_vbase[nesvnic->nic.rq_tail];
@@ -2020,6 +2025,9 @@
 
 	pci_free_consistent(nesdev->pcidev, nesvnic->nic_mem_size, nesvnic->nic_vbase,
 			nesvnic->nic_pbase);
+
+	/* restore old wqm_cfg0 value */
+	nes_write_indexed(nesdev, NES_IDX_WQM_CONFIG0, wqm_cfg0);
 }
 
 /**
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index 9b1e7f8..bbbfe9f 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -160,6 +160,7 @@
 	NES_IDX_ENDNODE0_NSTAT_TX_OCTETS_HI = 0x7004,
 	NES_IDX_ENDNODE0_NSTAT_TX_FRAMES_LO = 0x7008,
 	NES_IDX_ENDNODE0_NSTAT_TX_FRAMES_HI = 0x700c,
+	NES_IDX_WQM_CONFIG0 = 0x5000,
 	NES_IDX_WQM_CONFIG1 = 0x5004,
 	NES_IDX_CM_CONFIG = 0x5100,
 	NES_IDX_NIC_LOGPORT_TO_PHYPORT = 0x6000,
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index a1d79b6..91fdde3 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -1595,7 +1595,6 @@
 	struct nes_vnic *nesvnic;
 	struct net_device *netdev;
 	struct nic_qp_map *curr_qp_map;
-	u32 u32temp;
 	u8 phy_type = nesdev->nesadapter->phy_type[nesdev->mac_index];
 
 	netdev = alloc_etherdev(sizeof(struct nes_vnic));
@@ -1707,6 +1706,10 @@
 	     ((phy_type == NES_PHY_TYPE_PUMA_1G) &&
 	      (((PCI_FUNC(nesdev->pcidev->devfn) == 1) && (nesdev->mac_index == 2)) ||
 	       ((PCI_FUNC(nesdev->pcidev->devfn) == 2) && (nesdev->mac_index == 1)))))) {
+		u32 u32temp;
+		u32 link_mask;
+		u32 link_val;
+
 		u32temp = nes_read_indexed(nesdev, NES_IDX_PHY_PCS_CONTROL_STATUS0 +
 				(0x200 * (nesdev->mac_index & 1)));
 		if (phy_type != NES_PHY_TYPE_PUMA_1G) {
@@ -1715,13 +1718,36 @@
 				(0x200 * (nesdev->mac_index & 1)), u32temp);
 		}
 
+		/* Check and set linkup here.  This is for back to back */
+		/* configuration where second port won't get link interrupt */
+		switch (phy_type) {
+		case NES_PHY_TYPE_PUMA_1G:
+			if (nesdev->mac_index < 2) {
+				link_mask = 0x01010000;
+				link_val = 0x01010000;
+			} else {
+				link_mask = 0x02020000;
+				link_val = 0x02020000;
+			}
+			break;
+		default:
+			link_mask = 0x0f1f0000;
+			link_val = 0x0f0f0000;
+			break;
+		}
+
+		u32temp = nes_read_indexed(nesdev,
+					   NES_IDX_PHY_PCS_CONTROL_STATUS0 +
+					   (0x200 * (nesdev->mac_index & 1)));
+		if ((u32temp & link_mask) == link_val)
+			nesvnic->linkup = 1;
+
 		/* clear the MAC interrupt status, assumes direct logical to physical mapping */
 		u32temp = nes_read_indexed(nesdev, NES_IDX_MAC_INT_STATUS + (0x200 * nesdev->mac_index));
 		nes_debug(NES_DBG_INIT, "Phy interrupt status = 0x%X.\n", u32temp);
 		nes_write_indexed(nesdev, NES_IDX_MAC_INT_STATUS + (0x200 * nesdev->mac_index), u32temp);
 
 		nes_init_phy(nesdev);
-
 	}
 
 	return netdev;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 815725f..6992829 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1323,6 +1323,7 @@
 			nesqp->nesqp_context->aeq_token_low =  cpu_to_le32((u32)((unsigned long)(nesqp)));
 			nesqp->nesqp_context->aeq_token_high =  cpu_to_le32((u32)(upper_32_bits((unsigned long)(nesqp))));
 			nesqp->nesqp_context->ird_ord_sizes = cpu_to_le32(NES_QPCONTEXT_ORDIRD_ALSMM |
+					NES_QPCONTEXT_ORDIRD_AAH |
 					((((u32)nesadapter->max_irrq_wr) <<
 					NES_QPCONTEXT_ORDIRD_IRDSIZE_SHIFT) & NES_QPCONTEXT_ORDIRD_IRDSIZE_MASK));
 			if (disable_mpa_crc) {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 83a7751..bc65837 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -708,6 +708,7 @@
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	struct ipoib_cm_tx_buf *tx_req;
 	u64 addr;
+	int rc;
 
 	if (unlikely(skb->len > tx->mtu)) {
 		ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n",
@@ -739,9 +740,10 @@
 
 	tx_req->mapping = addr;
 
-	if (unlikely(post_send(priv, tx, tx->tx_head & (ipoib_sendq_size - 1),
-			       addr, skb->len))) {
-		ipoib_warn(priv, "post_send failed\n");
+	rc = post_send(priv, tx, tx->tx_head & (ipoib_sendq_size - 1),
+		       addr, skb->len);
+	if (unlikely(rc)) {
+		ipoib_warn(priv, "post_send failed, error %d\n", rc);
 		++dev->stats.tx_errors;
 		ib_dma_unmap_single(priv->ca, addr, skb->len, DMA_TO_DEVICE);
 		dev_kfree_skb_any(skb);
@@ -752,6 +754,8 @@
 		if (++priv->tx_outstanding == ipoib_sendq_size) {
 			ipoib_dbg(priv, "TX ring 0x%x full, stopping kernel net queue\n",
 				  tx->qp->qp_num);
+			if (ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP))
+				ipoib_warn(priv, "request notify on send CQ failed\n");
 			netif_stop_queue(dev);
 		}
 	}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 8c91d9f..5df40b1 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -529,7 +529,7 @@
 {
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	struct ipoib_tx_buf *tx_req;
-	int hlen;
+	int hlen, rc;
 	void *phead;
 
 	if (skb_is_gso(skb)) {
@@ -585,9 +585,10 @@
 		netif_stop_queue(dev);
 	}
 
-	if (unlikely(post_send(priv, priv->tx_head & (ipoib_sendq_size - 1),
-			       address->ah, qpn, tx_req, phead, hlen))) {
-		ipoib_warn(priv, "post_send failed\n");
+	rc = post_send(priv, priv->tx_head & (ipoib_sendq_size - 1),
+		       address->ah, qpn, tx_req, phead, hlen);
+	if (unlikely(rc)) {
+		ipoib_warn(priv, "post_send failed, error %d\n", rc);
 		++dev->stats.tx_errors;
 		--priv->tx_outstanding;
 		ipoib_dma_unmap_tx(priv->ca, tx_req);
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 9f9816b..2ee6c7a 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -515,7 +515,7 @@
 	struct input_absinfo abs;
 	struct ff_effect effect;
 	int __user *ip = (int __user *)p;
-	int i, t, u, v;
+	unsigned int i, t, u, v;
 	int error;
 
 	switch (cmd) {
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 41168d5..e2aad0a 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -582,7 +582,8 @@
 }
 
 static int input_default_getkeycode(struct input_dev *dev,
-				    int scancode, int *keycode)
+				    unsigned int scancode,
+				    unsigned int *keycode)
 {
 	if (!dev->keycodesize)
 		return -EINVAL;
@@ -596,7 +597,8 @@
 }
 
 static int input_default_setkeycode(struct input_dev *dev,
-				    int scancode, int keycode)
+				    unsigned int scancode,
+				    unsigned int keycode)
 {
 	int old_keycode;
 	int i;
@@ -654,11 +656,9 @@
  * This function should be called by anyone interested in retrieving current
  * keymap. Presently keyboard and evdev handlers use it.
  */
-int input_get_keycode(struct input_dev *dev, int scancode, int *keycode)
+int input_get_keycode(struct input_dev *dev,
+		      unsigned int scancode, unsigned int *keycode)
 {
-	if (scancode < 0)
-		return -EINVAL;
-
 	return dev->getkeycode(dev, scancode, keycode);
 }
 EXPORT_SYMBOL(input_get_keycode);
@@ -672,16 +672,14 @@
  * This function should be called by anyone needing to update current
  * keymap. Presently keyboard and evdev handlers use it.
  */
-int input_set_keycode(struct input_dev *dev, int scancode, int keycode)
+int input_set_keycode(struct input_dev *dev,
+		      unsigned int scancode, unsigned int keycode)
 {
 	unsigned long flags;
 	int old_keycode;
 	int retval;
 
-	if (scancode < 0)
-		return -EINVAL;
-
-	if (keycode < 0 || keycode > KEY_MAX)
+	if (keycode > KEY_MAX)
 		return -EINVAL;
 
 	spin_lock_irqsave(&dev->event_lock, flags);
@@ -1881,35 +1879,37 @@
 	const struct file_operations *old_fops, *new_fops = NULL;
 	int err;
 
-	lock_kernel();
+	err = mutex_lock_interruptible(&input_mutex);
+	if (err)
+		return err;
+
 	/* No load-on-demand here? */
 	handler = input_table[iminor(inode) >> 5];
-	if (!handler || !(new_fops = fops_get(handler->fops))) {
-		err = -ENODEV;
-		goto out;
-	}
+	if (handler)
+		new_fops = fops_get(handler->fops);
+
+	mutex_unlock(&input_mutex);
 
 	/*
 	 * That's _really_ odd. Usually NULL ->open means "nothing special",
 	 * not "no device". Oh, well...
 	 */
-	if (!new_fops->open) {
+	if (!new_fops || !new_fops->open) {
 		fops_put(new_fops);
 		err = -ENODEV;
 		goto out;
 	}
+
 	old_fops = file->f_op;
 	file->f_op = new_fops;
 
 	err = new_fops->open(inode, file);
-
 	if (err) {
 		fops_put(file->f_op);
 		file->f_op = fops_get(old_fops);
 	}
 	fops_put(old_fops);
 out:
-	unlock_kernel();
 	return err;
 }
 
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index ae998d9..7a55714 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -819,7 +819,7 @@
 	int i;
 	int err;
 
-	if (pad_type < 1 || pad_type > GC_MAX) {
+	if (pad_type < 1 || pad_type >= GC_MAX) {
 		pr_err("Pad type %d unknown\n", pad_type);
 		return -EINVAL;
 	}
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index fe376a2..593c052 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -162,7 +162,7 @@
 	input_sync(input);
 
 	if (bfin_kpad_get_keypressed(bf54x_kpad)) {
-		disable_irq(bf54x_kpad->irq);
+		disable_irq_nosync(bf54x_kpad->irq);
 		bf54x_kpad->lastkey = key;
 		mod_timer(&bf54x_kpad->timer,
 			  jiffies + bf54x_kpad->keyup_test_jiffies);
diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c
index 9caed30..b1ab298 100644
--- a/drivers/input/keyboard/locomokbd.c
+++ b/drivers/input/keyboard/locomokbd.c
@@ -192,11 +192,18 @@
 static irqreturn_t locomokbd_interrupt(int irq, void *dev_id)
 {
 	struct locomokbd *locomokbd = dev_id;
+	u16 r;
+
+	r = locomo_readl(locomokbd->base + LOCOMO_KIC);
+	if ((r & 0x0001) == 0)
+		return IRQ_HANDLED;
+
+	locomo_writel(r & ~0x0100, locomokbd->base + LOCOMO_KIC); /* Ack */
+
 	/** wait chattering delay **/
 	udelay(100);
 
 	locomokbd_scankeyboard(locomokbd);
-
 	return IRQ_HANDLED;
 }
 
@@ -210,6 +217,25 @@
 	locomokbd_scankeyboard(locomokbd);
 }
 
+static int locomokbd_open(struct input_dev *dev)
+{
+	struct locomokbd *locomokbd = input_get_drvdata(dev);
+	u16 r;
+	
+	r = locomo_readl(locomokbd->base + LOCOMO_KIC) | 0x0010;
+	locomo_writel(r, locomokbd->base + LOCOMO_KIC);
+	return 0;
+}
+
+static void locomokbd_close(struct input_dev *dev)
+{
+	struct locomokbd *locomokbd = input_get_drvdata(dev);
+	u16 r;
+	
+	r = locomo_readl(locomokbd->base + LOCOMO_KIC) & ~0x0010;
+	locomo_writel(r, locomokbd->base + LOCOMO_KIC);
+}
+
 static int __devinit locomokbd_probe(struct locomo_dev *dev)
 {
 	struct locomokbd *locomokbd;
@@ -253,6 +279,8 @@
 	input_dev->id.vendor = 0x0001;
 	input_dev->id.product = 0x0001;
 	input_dev->id.version = 0x0100;
+	input_dev->open = locomokbd_open;
+	input_dev->close = locomokbd_close;
 	input_dev->dev.parent = &dev->dev;
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
@@ -261,6 +289,8 @@
 	input_dev->keycodesize = sizeof(locomokbd_keycode[0]);
 	input_dev->keycodemax = ARRAY_SIZE(locomokbd_keycode);
 
+	input_set_drvdata(input_dev, locomokbd);
+
 	memcpy(locomokbd->keycode, locomokbd_keycode, sizeof(locomokbd->keycode));
 	for (i = 0; i < LOCOMOKBD_NUMKEYS; i++)
 		set_bit(locomokbd->keycode[i], input_dev->keybit);
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7097bfe..23140a3 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -214,6 +214,17 @@
 	  To compile this driver as a module, choose M here. The module will
 	  be called twl4030_pwrbutton.
 
+config INPUT_TWL4030_VIBRA
+	tristate "Support for TWL4030 Vibrator"
+	depends on TWL4030_CORE
+	select TWL4030_CODEC
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables support for TWL4030 Vibrator Driver.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called twl4030_vibra.
+
 config INPUT_UINPUT
 	tristate "User level driver support"
 	help
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index b611615..7e95a5d 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -26,6 +26,7 @@
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
+obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
 obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winbond-cir.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index 0501f0e..15be5430 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -474,10 +474,11 @@
 }
 
 static int ati_remote2_getkeycode(struct input_dev *idev,
-				  int scancode, int *keycode)
+				  unsigned int scancode, unsigned int *keycode)
 {
 	struct ati_remote2 *ar2 = input_get_drvdata(idev);
-	int index, mode;
+	unsigned int mode;
+	int index;
 
 	mode = scancode >> 8;
 	if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask))
@@ -491,10 +492,12 @@
 	return 0;
 }
 
-static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keycode)
+static int ati_remote2_setkeycode(struct input_dev *idev,
+				  unsigned int scancode, unsigned int keycode)
 {
 	struct ati_remote2 *ar2 = input_get_drvdata(idev);
-	int index, mode, old_keycode;
+	unsigned int mode, old_keycode;
+	int index;
 
 	mode = scancode >> 8;
 	if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask))
@@ -504,9 +507,6 @@
 	if (index < 0)
 		return -EINVAL;
 
-	if (keycode < KEY_RESERVED || keycode > KEY_MAX)
-		return -EINVAL;
-
 	old_keycode = ar2->keycode[mode][index];
 	ar2->keycode[mode][index] = keycode;
 	__set_bit(keycode, idev->keybit);
diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
new file mode 100644
index 0000000..2fb79e0
--- /dev/null
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -0,0 +1,297 @@
+/*
+ * twl4030-vibra.c - TWL4030 Vibrator driver
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Written by Henrik Saari <henrik.saari@nokia.com>
+ * Updates by Felipe Balbi <felipe.balbi@nokia.com>
+ * Input by Jari Vanhala <ext-jari.vanhala@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/i2c/twl.h>
+#include <linux/mfd/twl4030-codec.h>
+#include <linux/input.h>
+
+/* MODULE ID2 */
+#define LEDEN		0x00
+
+/* ForceFeedback */
+#define EFFECT_DIR_180_DEG	0x8000 /* range is 0 - 0xFFFF */
+
+struct vibra_info {
+	struct device		*dev;
+	struct input_dev	*input_dev;
+
+	struct workqueue_struct *workqueue;
+	struct work_struct	play_work;
+
+	bool			enabled;
+	int			speed;
+	int			direction;
+
+	bool			coexist;
+};
+
+static void vibra_disable_leds(void)
+{
+	u8 reg;
+
+	/* Disable LEDA & LEDB, cannot be used with vibra (PWM) */
+	twl_i2c_read_u8(TWL4030_MODULE_LED, &reg, LEDEN);
+	reg &= ~0x03;
+	twl_i2c_write_u8(TWL4030_MODULE_LED, LEDEN, reg);
+}
+
+/* Powers H-Bridge and enables audio clk */
+static void vibra_enable(struct vibra_info *info)
+{
+	u8 reg;
+
+	twl4030_codec_enable_resource(TWL4030_CODEC_RES_POWER);
+
+	/* turn H-Bridge on */
+	twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE,
+			&reg, TWL4030_REG_VIBRA_CTL);
+	twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+			 (reg | TWL4030_VIBRA_EN), TWL4030_REG_VIBRA_CTL);
+
+	twl4030_codec_enable_resource(TWL4030_CODEC_RES_APLL);
+
+	info->enabled = true;
+}
+
+static void vibra_disable(struct vibra_info *info)
+{
+	u8 reg;
+
+	/* Power down H-Bridge */
+	twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE,
+			&reg, TWL4030_REG_VIBRA_CTL);
+	twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+			 (reg & ~TWL4030_VIBRA_EN), TWL4030_REG_VIBRA_CTL);
+
+	twl4030_codec_disable_resource(TWL4030_CODEC_RES_POWER);
+	twl4030_codec_disable_resource(TWL4030_CODEC_RES_APLL);
+
+	info->enabled = false;
+}
+
+static void vibra_play_work(struct work_struct *work)
+{
+	struct vibra_info *info = container_of(work,
+			struct vibra_info, play_work);
+	int dir;
+	int pwm;
+	u8 reg;
+
+	dir = info->direction;
+	pwm = info->speed;
+
+	twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE,
+			&reg, TWL4030_REG_VIBRA_CTL);
+	if (pwm && (!info->coexist || !(reg & TWL4030_VIBRA_SEL))) {
+
+		if (!info->enabled)
+			vibra_enable(info);
+
+		/* set vibra rotation direction */
+		twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE,
+				&reg, TWL4030_REG_VIBRA_CTL);
+		reg = (dir) ? (reg | TWL4030_VIBRA_DIR) :
+			(reg & ~TWL4030_VIBRA_DIR);
+		twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+				 reg, TWL4030_REG_VIBRA_CTL);
+
+		/* set PWM, 1 = max, 255 = min */
+		twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+				 256 - pwm, TWL4030_REG_VIBRA_SET);
+	} else {
+		if (info->enabled)
+			vibra_disable(info);
+	}
+}
+
+/*** Input/ForceFeedback ***/
+
+static int vibra_play(struct input_dev *input, void *data,
+		      struct ff_effect *effect)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	info->speed = effect->u.rumble.strong_magnitude >> 8;
+	if (!info->speed)
+		info->speed = effect->u.rumble.weak_magnitude >> 9;
+	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 0 : 1;
+	queue_work(info->workqueue, &info->play_work);
+	return 0;
+}
+
+static int twl4030_vibra_open(struct input_dev *input)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	info->workqueue = create_singlethread_workqueue("vibra");
+	if (info->workqueue == NULL) {
+		dev_err(&input->dev, "couldn't create workqueue\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void twl4030_vibra_close(struct input_dev *input)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	cancel_work_sync(&info->play_work);
+	INIT_WORK(&info->play_work, vibra_play_work); /* cleanup */
+	destroy_workqueue(info->workqueue);
+	info->workqueue = NULL;
+
+	if (info->enabled)
+		vibra_disable(info);
+}
+
+/*** Module ***/
+#if CONFIG_PM
+static int twl4030_vibra_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vibra_info *info = platform_get_drvdata(pdev);
+
+	if (info->enabled)
+		vibra_disable(info);
+
+	return 0;
+}
+
+static int twl4030_vibra_resume(struct device *dev)
+{
+	vibra_disable_leds();
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(twl4030_vibra_pm_ops,
+			 twl4030_vibra_suspend, twl4030_vibra_resume);
+#endif
+
+static int __devinit twl4030_vibra_probe(struct platform_device *pdev)
+{
+	struct twl4030_codec_vibra_data *pdata = pdev->dev.platform_data;
+	struct vibra_info *info;
+	int ret;
+
+	if (!pdata) {
+		dev_dbg(&pdev->dev, "platform_data not available\n");
+		return -EINVAL;
+	}
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = &pdev->dev;
+	info->coexist = pdata->coexist;
+	INIT_WORK(&info->play_work, vibra_play_work);
+
+	info->input_dev = input_allocate_device();
+	if (info->input_dev == NULL) {
+		dev_err(&pdev->dev, "couldn't allocate input device\n");
+		ret = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	input_set_drvdata(info->input_dev, info);
+
+	info->input_dev->name = "twl4030:vibrator";
+	info->input_dev->id.version = 1;
+	info->input_dev->dev.parent = pdev->dev.parent;
+	info->input_dev->open = twl4030_vibra_open;
+	info->input_dev->close = twl4030_vibra_close;
+	__set_bit(FF_RUMBLE, info->input_dev->ffbit);
+
+	ret = input_ff_create_memless(info->input_dev, NULL, vibra_play);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "couldn't register vibrator to FF\n");
+		goto err_ialloc;
+	}
+
+	ret = input_register_device(info->input_dev);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "couldn't register input device\n");
+		goto err_iff;
+	}
+
+	vibra_disable_leds();
+
+	platform_set_drvdata(pdev, info);
+	return 0;
+
+err_iff:
+	input_ff_destroy(info->input_dev);
+err_ialloc:
+	input_free_device(info->input_dev);
+err_kzalloc:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit twl4030_vibra_remove(struct platform_device *pdev)
+{
+	struct vibra_info *info = platform_get_drvdata(pdev);
+
+	/* this also free ff-memless and calls close if needed */
+	input_unregister_device(info->input_dev);
+	kfree(info);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver twl4030_vibra_driver = {
+	.probe		= twl4030_vibra_probe,
+	.remove		= __devexit_p(twl4030_vibra_remove),
+	.driver		= {
+		.name	= "twl4030_codec_vibra",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &twl4030_vibra_pm_ops,
+#endif
+	},
+};
+
+static int __init twl4030_vibra_init(void)
+{
+	return platform_driver_register(&twl4030_vibra_driver);
+}
+module_init(twl4030_vibra_init);
+
+static void __exit twl4030_vibra_exit(void)
+{
+	platform_driver_unregister(&twl4030_vibra_driver);
+}
+module_exit(twl4030_vibra_exit);
+
+MODULE_ALIAS("platform:twl4030_codec_vibra");
+
+MODULE_DESCRIPTION("TWL4030 Vibra driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nokia Corporation");
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c
index cbec3df..9c155a4 100644
--- a/drivers/input/misc/winbond-cir.c
+++ b/drivers/input/misc/winbond-cir.c
@@ -385,26 +385,24 @@
 }
 
 static int
-wbcir_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+wbcir_getkeycode(struct input_dev *dev,
+		 unsigned int scancode, unsigned int *keycode)
 {
 	struct wbcir_data *data = input_get_drvdata(dev);
 
-	*keycode = (int)wbcir_do_getkeycode(data, (u32)scancode);
+	*keycode = wbcir_do_getkeycode(data, scancode);
 	return 0;
 }
 
 static int
-wbcir_setkeycode(struct input_dev *dev, int sscancode, int keycode)
+wbcir_setkeycode(struct input_dev *dev,
+		 unsigned int scancode, unsigned int keycode)
 {
 	struct wbcir_data *data = input_get_drvdata(dev);
 	struct wbcir_keyentry *keyentry;
 	struct wbcir_keyentry *new_keyentry;
 	unsigned long flags;
 	unsigned int old_keycode = KEY_RESERVED;
-	u32 scancode = (u32)sscancode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
 
 	new_keyentry = kmalloc(sizeof(*new_keyentry), GFP_KERNEL);
 	if (!new_keyentry)
diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c
index ba4f5dd..1e54bce 100644
--- a/drivers/input/misc/wm831x-on.c
+++ b/drivers/input/misc/wm831x-on.c
@@ -97,8 +97,9 @@
 	wm831x_on->dev->phys = "wm831x_on/input0";
 	wm831x_on->dev->dev.parent = &pdev->dev;
 
-	ret = wm831x_request_irq(wm831x, irq, wm831x_on_irq,
-				 IRQF_TRIGGER_RISING, "wm831x_on", wm831x_on);
+	ret = request_threaded_irq(irq, NULL, wm831x_on_irq,
+				   IRQF_TRIGGER_RISING, "wm831x_on",
+				   wm831x_on);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret);
 		goto err_input_dev;
@@ -114,7 +115,7 @@
 	return 0;
 
 err_irq:
-	wm831x_free_irq(wm831x, irq, NULL);
+	free_irq(irq, wm831x_on);
 err_input_dev:
 	input_free_device(wm831x_on->dev);
 err:
@@ -127,7 +128,7 @@
 	struct wm831x_on *wm831x_on = platform_get_drvdata(pdev);
 	int irq = platform_get_irq(pdev, 0);
 
-	wm831x_free_irq(wm831x_on->wm831x, irq, wm831x_on);
+	free_irq(irq, wm831x_on);
 	cancel_delayed_work_sync(&wm831x_on->work);
 	input_unregister_device(wm831x_on->dev);
 	kfree(wm831x_on);
diff --git a/drivers/input/misc/yealink.h b/drivers/input/misc/yealink.h
index 48af0be..1e0f523 100644
--- a/drivers/input/misc/yealink.h
+++ b/drivers/input/misc/yealink.h
@@ -127,7 +127,7 @@
  * yld_status struct.
  */
 
-/* LCD, each segment must be driven seperately.
+/* LCD, each segment must be driven separately.
  *
  * Layout:
  *
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index f93c2c0..7490f1d 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -63,6 +63,8 @@
 	{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
 		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
 	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },	  /* Dell Vostro 1400 */
+	{ { 0x52, 0x01, 0x14 }, 0xff, 0xff,
+		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },	  /* Toshiba Tecra A11-11L */
 };
 
 /*
@@ -118,40 +120,27 @@
 				struct input_dev *dev1, struct input_dev *dev2,
 				int left, int right, int middle)
 {
-	struct alps_data *priv = psmouse->private;
-	const struct alps_model_info *model = priv->i;
+	struct input_dev *dev;
 
-	if (model->flags & ALPS_PS2_INTERLEAVED) {
-		struct input_dev *dev;
+	/*
+	 * If shared button has already been reported on the
+	 * other device (dev2) then this event should be also
+	 * sent through that device.
+	 */
+	dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1;
+	input_report_key(dev, BTN_LEFT, left);
 
-		/*
-		 * If shared button has already been reported on the
-		 * other device (dev2) then this event should be also
-		 * sent through that device.
-		 */
-		dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1;
-		input_report_key(dev, BTN_LEFT, left);
+	dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1;
+	input_report_key(dev, BTN_RIGHT, right);
 
-		dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1;
-		input_report_key(dev, BTN_RIGHT, right);
+	dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1;
+	input_report_key(dev, BTN_MIDDLE, middle);
 
-		dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1;
-		input_report_key(dev, BTN_MIDDLE, middle);
-
-		/*
-		 * Sync the _other_ device now, we'll do the first
-		 * device later once we report the rest of the events.
-		 */
-		input_sync(dev2);
-	} else {
-		/*
-		 * For devices with non-interleaved packets we know what
-		 * device buttons belong to so we can simply report them.
-		 */
-		input_report_key(dev1, BTN_LEFT, left);
-		input_report_key(dev1, BTN_RIGHT, right);
-		input_report_key(dev1, BTN_MIDDLE, middle);
-	}
+	/*
+	 * Sync the _other_ device now, we'll do the first
+	 * device later once we report the rest of the events.
+	 */
+	input_sync(dev2);
 }
 
 static void alps_process_packet(struct psmouse *psmouse)
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 908b5b4..53ec7dd 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -205,8 +205,8 @@
 	bool			overflow_warned;
 	int			x_old;		/* last reported x/y, */
 	int			y_old;		/* used for smoothing */
-	signed char		xy_cur[ATP_XSENSORS + ATP_YSENSORS];
-	signed char		xy_old[ATP_XSENSORS + ATP_YSENSORS];
+	u8			xy_cur[ATP_XSENSORS + ATP_YSENSORS];
+	u8			xy_old[ATP_XSENSORS + ATP_YSENSORS];
 	int			xy_acc[ATP_XSENSORS + ATP_YSENSORS];
 	int			idlecount;	/* number of empty packets */
 	struct work_struct	work;
@@ -531,7 +531,7 @@
 
 	for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
 		/* accumulate the change */
-		signed char change = dev->xy_old[i] - dev->xy_cur[i];
+		int change = dev->xy_old[i] - dev->xy_cur[i];
 		dev->xy_acc[i] -= change;
 
 		/* prevent down drifting */
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index a13d80f..f34b22b 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -15,7 +15,6 @@
 
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/poll.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -542,10 +541,8 @@
 	if (i >= MOUSEDEV_MINORS)
 		return -ENODEV;
 
-	lock_kernel();
 	error = mutex_lock_interruptible(&mousedev_table_mutex);
 	if (error) {
-		unlock_kernel();
 		return error;
 	}
 	mousedev = mousedev_table[i];
@@ -554,7 +551,6 @@
 	mutex_unlock(&mousedev_table_mutex);
 
 	if (!mousedev) {
-		unlock_kernel();
 		return -ENODEV;
 	}
 
@@ -575,7 +571,6 @@
 		goto err_free_client;
 
 	file->private_data = client;
-	unlock_kernel();
 	return 0;
 
  err_free_client:
@@ -583,7 +578,6 @@
 	kfree(client);
  err_put_mousedev:
 	put_device(&mousedev->dev);
-	unlock_kernel();
 	return error;
 }
 
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 2a5982e..ead0494 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -442,6 +442,13 @@
 		},
 	},
 	{
+		/* Medion Akoya E1222 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E122X"),
+		},
+	},
+	{
 		/* Mivvy M310 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"),
@@ -624,6 +631,9 @@
 		strlcat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name));
 	}
 
+	/* Keyboard ports are always supposed to be wakeup-enabled */
+	device_set_wakeup_enable(&dev->dev, true);
+
 	i8042_pnp_kbd_devices++;
 	return 0;
 }
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index b54aee7..9302ba0 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -430,7 +430,7 @@
 	}
 
 	if (i8042_platform_filter && i8042_platform_filter(data, str, serio)) {
-		dbg("Filtered out by platfrom filter\n");
+		dbg("Filtered out by platform filter\n");
 		return true;
 	}
 
@@ -1386,6 +1386,8 @@
 {
 	int error;
 
+	i8042_platform_device = dev;
+
 	error = i8042_controller_selftest();
 	if (error)
 		return error;
@@ -1421,6 +1423,7 @@
 	i8042_free_aux_ports();	/* in case KBD failed but AUX not */
 	i8042_free_irqs();
 	i8042_controller_reset();
+	i8042_platform_device = NULL;
 
 	return error;
 }
@@ -1430,6 +1433,7 @@
 	i8042_unregister_ports();
 	i8042_free_irqs();
 	i8042_controller_reset();
+	i8042_platform_device = NULL;
 
 	return 0;
 }
@@ -1448,6 +1452,7 @@
 
 static int __init i8042_init(void)
 {
+	struct platform_device *pdev;
 	int err;
 
 	dbg_init();
@@ -1460,31 +1465,18 @@
 	if (err)
 		goto err_platform_exit;
 
-	i8042_platform_device = platform_device_alloc("i8042", -1);
-	if (!i8042_platform_device) {
-		err = -ENOMEM;
+	pdev = platform_create_bundle(&i8042_driver, i8042_probe, NULL, 0, NULL, 0);
+	if (IS_ERR(pdev)) {
+		err = PTR_ERR(pdev);
 		goto err_platform_exit;
 	}
 
-	err = platform_device_add(i8042_platform_device);
-	if (err)
-		goto err_free_device;
-
-	err = platform_driver_probe(&i8042_driver, i8042_probe);
-	if (err)
-		goto err_del_device;
-
 	panic_blink = i8042_panic_blink;
 
 	return 0;
 
- err_del_device:
-	platform_device_del(i8042_platform_device);
- err_free_device:
-	platform_device_put(i8042_platform_device);
  err_platform_exit:
 	i8042_platform_exit();
-
 	return err;
 }
 
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index 27fdaaf..9986648 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -81,12 +81,12 @@
 	struct serio_raw_list *list;
 	int retval = 0;
 
-	lock_kernel();
 	retval = mutex_lock_interruptible(&serio_raw_mutex);
 	if (retval)
-		goto out_bkl;
+		return retval;
 
-	if (!(serio_raw = serio_raw_locate(iminor(inode)))) {
+	serio_raw = serio_raw_locate(iminor(inode));
+	if (!serio_raw) {
 		retval = -ENODEV;
 		goto out;
 	}
@@ -96,7 +96,8 @@
 		goto out;
 	}
 
-	if (!(list = kzalloc(sizeof(struct serio_raw_list), GFP_KERNEL))) {
+	list = kzalloc(sizeof(struct serio_raw_list), GFP_KERNEL);
+	if (!list) {
 		retval = -ENOMEM;
 		goto out;
 	}
@@ -109,8 +110,6 @@
 
 out:
 	mutex_unlock(&serio_raw_mutex);
-out_bkl:
-	unlock_kernel();
 	return retval;
 }
 
diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c
index fbd3987..e6bde55 100644
--- a/drivers/input/sparse-keymap.c
+++ b/drivers/input/sparse-keymap.c
@@ -64,7 +64,8 @@
 EXPORT_SYMBOL(sparse_keymap_entry_from_keycode);
 
 static int sparse_keymap_getkeycode(struct input_dev *dev,
-				    int scancode, int *keycode)
+				    unsigned int scancode,
+				    unsigned int *keycode)
 {
 	const struct key_entry *key =
 			sparse_keymap_entry_from_scancode(dev, scancode);
@@ -78,7 +79,8 @@
 }
 
 static int sparse_keymap_setkeycode(struct input_dev *dev,
-				    int scancode, int keycode)
+				    unsigned int scancode,
+				    unsigned int keycode)
 {
 	struct key_entry *key;
 	int old_keycode;
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 7d005a3..4be039d 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -362,7 +362,7 @@
 };
 
 /***********************************************************************
- * Map values to strings and back. Every map shoudl have the following
+ * Map values to strings and back. Every map should have the following
  * as its last element: { NULL, AIPTEK_INVALID_VALUE }.
  */
 #define AIPTEK_INVALID_VALUE	-1
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index a1770e6..8b5d287 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -371,7 +371,7 @@
 					} else if (pen) {
 						/* penabled only accepts exact bytes of data */
 						if (features->type == TABLETPC2FG)
-							features->pktlen = WACOM_PKGLEN_PENABLED;
+							features->pktlen = WACOM_PKGLEN_GRAPHIRE;
 						features->device_type = BTN_TOOL_PEN;
 						features->x_max =
 							wacom_le16_to_cpu(&report[i + 3]);
@@ -410,7 +410,7 @@
 					} else if (pen) {
 						/* penabled only accepts exact bytes of data */
 						if (features->type == TABLETPC2FG)
-							features->pktlen = WACOM_PKGLEN_PENABLED;
+							features->pktlen = WACOM_PKGLEN_GRAPHIRE;
 						features->device_type = BTN_TOOL_PEN;
 						features->y_max =
 							wacom_le16_to_cpu(&report[i + 3]);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 3d81443..b3ba343 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -155,19 +155,19 @@
 {
 	struct wacom_features *features = &wacom->features;
 	unsigned char *data = wacom->data;
-	int x, y, rw;
-	static int penData = 0;
+	int x, y, prox;
+	int rw = 0;
+	int retval = 0;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
 		dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
-		return 0;
+		goto exit;
 	}
 
-	if (data[1] & 0x80) {
-		/* in prox and not a pad data */
-		penData = 1;
-
-		switch ((data[1] >> 5) & 3) {
+	prox = data[1] & 0x80;
+	if (prox || wacom->id[0]) {
+		if (prox) {
+			switch ((data[1] >> 5) & 3) {
 
 			case 0:	/* Pen */
 				wacom->tool[0] = BTN_TOOL_PEN;
@@ -181,23 +181,13 @@
 
 			case 2: /* Mouse with wheel */
 				wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
-				if (features->type == WACOM_G4 || features->type == WACOM_MO) {
-					rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
-					wacom_report_rel(wcombo, REL_WHEEL, -rw);
-				} else
-					wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]);
 				/* fall through */
 
 			case 3: /* Mouse without wheel */
 				wacom->tool[0] = BTN_TOOL_MOUSE;
 				wacom->id[0] = CURSOR_DEVICE_ID;
-				wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
-				wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
-				if (features->type == WACOM_G4 || features->type == WACOM_MO)
-					wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
-				else
-					wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
 				break;
+			}
 		}
 		x = wacom_le16_to_cpu(&data[2]);
 		y = wacom_le16_to_cpu(&data[4]);
@@ -208,36 +198,32 @@
 			wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
 			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
 			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
-		}
-		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
-		wacom_report_key(wcombo, wacom->tool[0], 1);
-	} else if (wacom->id[0]) {
-		wacom_report_abs(wcombo, ABS_X, 0);
-		wacom_report_abs(wcombo, ABS_Y, 0);
-		if (wacom->tool[0] == BTN_TOOL_MOUSE) {
-			wacom_report_key(wcombo, BTN_LEFT, 0);
-			wacom_report_key(wcombo, BTN_RIGHT, 0);
-			wacom_report_abs(wcombo, ABS_DISTANCE, 0);
 		} else {
-			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
-			wacom_report_key(wcombo, BTN_TOUCH, 0);
-			wacom_report_key(wcombo, BTN_STYLUS, 0);
-			wacom_report_key(wcombo, BTN_STYLUS2, 0);
+			wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
+			wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
+			if (features->type == WACOM_G4 ||
+					features->type == WACOM_MO) {
+				wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
+				rw = (signed)(data[7] & 0x04) - (data[7] & 0x03);
+			} else {
+				wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
+				rw = -(signed)data[6];
+			}
+			wacom_report_rel(wcombo, REL_WHEEL, rw);
 		}
-		wacom->id[0] = 0;
-		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
-		wacom_report_key(wcombo, wacom->tool[0], 0);
+
+		if (!prox)
+			wacom->id[0] = 0;
+		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
+		wacom_report_key(wcombo, wacom->tool[0], prox);
+		wacom_input_sync(wcombo); /* sync last event */
 	}
 
 	/* send pad data */
 	switch (features->type) {
 	    case WACOM_G4:
-		if (data[7] & 0xf8) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
+		prox = data[7] & 0xf8;
+		if (prox || wacom->id[1]) {
 			wacom->id[1] = PAD_DEVICE_ID;
 			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
 			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
@@ -245,29 +231,16 @@
 			wacom_report_rel(wcombo, REL_WHEEL, rw);
 			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
 			wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
-			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
-		} else if (wacom->id[1]) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
-			wacom->id[1] = 0;
-			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
-			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
-			wacom_report_rel(wcombo, REL_WHEEL, 0);
-			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
-			wacom_report_abs(wcombo, ABS_MISC, 0);
+			if (!prox)
+				wacom->id[1] = 0;
+			wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
 			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
 		}
+		retval = 1;
 		break;
 	    case WACOM_MO:
-		if ((data[7] & 0xf8) || (data[8] & 0xff)) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
+		prox = (data[7] & 0xf8) || data[8];
+		if (prox || wacom->id[1]) {
 			wacom->id[1] = PAD_DEVICE_ID;
 			wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
 			wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
@@ -275,27 +248,16 @@
 			wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
 			wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
 			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
+			if (!prox)
+				wacom->id[1] = 0;
 			wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
 			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
-		} else if (wacom->id[1]) {
-			if (penData) {
-				wacom_input_sync(wcombo); /* sync last event */
-				if (!wacom->id[0])
-					penData = 0;
-			}
-			wacom->id[1] = 0;
-			wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
-			wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
-			wacom_report_key(wcombo, BTN_4, (data[7] & 0x10));
-			wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
-			wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
-			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
-			wacom_report_abs(wcombo, ABS_MISC, 0);
-			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
 		}
+		retval = 1;
 		break;
 	}
-	return 1;
+exit:
+	return retval;
 }
 
 static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
@@ -636,9 +598,9 @@
 static void wacom_tpc_finger_in(struct wacom_wac *wacom, void *wcombo, char *data, int idx)
 {
 	wacom_report_abs(wcombo, ABS_X,
-		(data[2 + idx * 2] & 0xff) | ((data[3 + idx * 2] & 0x7f) << 8));
+		data[2 + idx * 2] | ((data[3 + idx * 2] & 0x7f) << 8));
 	wacom_report_abs(wcombo, ABS_Y,
-		(data[6 + idx * 2] & 0xff) | ((data[7 + idx * 2] & 0x7f) << 8));
+		data[6 + idx * 2] | ((data[7 + idx * 2] & 0x7f) << 8));
 	wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
 	wacom_report_key(wcombo, wacom->tool[idx], 1);
 	if (idx)
@@ -782,31 +744,24 @@
 
 		touchInProx = 0;
 
-		if (prox) { /* in prox */
-			if (!wacom->id[0]) {
-				/* Going into proximity select tool */
-				wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-				if (wacom->tool[0] == BTN_TOOL_PEN)
-					wacom->id[0] = STYLUS_DEVICE_ID;
-				else
-					wacom->id[0] = ERASER_DEVICE_ID;
-			}
-			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
-			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
-			wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
-			wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
-			pressure = ((data[7] & 0x01) << 8) | data[6];
-			if (pressure < 0)
-				pressure = features->pressure_max + pressure + 1;
-			wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
-			wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x05);
-		} else {
-			wacom_report_abs(wcombo, ABS_X, 0);
-			wacom_report_abs(wcombo, ABS_Y, 0);
-			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
-			wacom_report_key(wcombo, BTN_STYLUS, 0);
-			wacom_report_key(wcombo, BTN_STYLUS2, 0);
-			wacom_report_key(wcombo, BTN_TOUCH, 0);
+		if (!wacom->id[0]) { /* first in prox */
+			/* Going into proximity select tool */
+			wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+			if (wacom->tool[0] == BTN_TOOL_PEN)
+				wacom->id[0] = STYLUS_DEVICE_ID;
+			else
+				wacom->id[0] = ERASER_DEVICE_ID;
+		}
+		wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+		wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+		wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+		wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+		pressure = ((data[7] & 0x01) << 8) | data[6];
+		if (pressure < 0)
+			pressure = features->pressure_max + pressure + 1;
+		wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+		wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x05);
+		if (!prox) { /* out-prox */
 			wacom->id[0] = 0;
 			/* pen is out so touch can be enabled now */
 			touchInProx = 1;
@@ -1028,7 +983,7 @@
 static const struct wacom_features wacom_features_0x9A =
 	{ "Wacom ISDv4 9A",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
 static const struct wacom_features wacom_features_0x9F =
-	{ "Wacom ISDv4 9F",       WACOM_PKGLEN_PENABLED,  26202, 16325,  255,  0, TABLETPC };
+	{ "Wacom ISDv4 9F",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
 static const struct wacom_features wacom_features_0xE2 =
 	{ "Wacom ISDv4 E2",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,  0, TABLETPC2FG };
 static const struct wacom_features wacom_features_0xE3 =
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 8590b1e..b50cf04 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -17,7 +17,6 @@
 #define WACOM_PKGLEN_GRAPHIRE	 8
 #define WACOM_PKGLEN_BBFUN	 9
 #define WACOM_PKGLEN_INTUOS	10
-#define WACOM_PKGLEN_PENABLED	 8
 #define WACOM_PKGLEN_TPC1FG	 5
 #define WACOM_PKGLEN_TPC2FG	14
 
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 7208654..8a8fa4d 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -24,17 +24,18 @@
 	  module will be called 88pm860x-ts.
 
 config TOUCHSCREEN_ADS7846
-	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
+	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
 	depends on SPI_MASTER
 	depends on HWMON = n || HWMON
 	help
 	  Say Y here if you have a touchscreen interface using the
-	  ADS7846/TSC2046 or ADS7843 controller, and your board-specific
-	  setup code includes that in its table of SPI devices.
+	  ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
+	  and your board-specific setup code includes that in its
+	  table of SPI devices.
 
 	  If HWMON is selected, and the driver is told the reference voltage
 	  on your board, you will also get hwmon interfaces for the voltage
-	  (and on ads7846/tsc2046, temperature) sensors of this chip.
+	  (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
 
 	  If unsure, say N (but it's safe to say "Y").
 
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index eb83939c..e019d53d 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -46,7 +46,7 @@
 #include <linux/spi/ad7877.h>
 #include <asm/irq.h>
 
-#define	TS_PEN_UP_TIMEOUT	msecs_to_jiffies(50)
+#define	TS_PEN_UP_TIMEOUT	msecs_to_jiffies(100)
 
 #define MAX_SPI_FREQ_HZ			20000000
 #define	MAX_12BIT			((1<<12)-1)
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 8b05d8e..532279c 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -36,6 +36,7 @@
  * TSC2046 is just newer ads7846 silicon.
  * Support for ads7843 tested on Atmel at91sam926x-EK.
  * Support for ads7845 has only been stubbed in.
+ * Support for Analog Devices AD7873 and AD7843 tested.
  *
  * IRQ handling needs a workaround because of a shortcoming in handling
  * edge triggered IRQs on some platforms like the OMAP1/2. These
@@ -821,6 +822,9 @@
 
 	spin_unlock_irq(&ts->lock);
 
+	if (device_may_wakeup(&ts->spi->dev))
+		enable_irq_wake(ts->spi->irq);
+
 	return 0;
 
 }
@@ -829,6 +833,9 @@
 {
 	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
 
+	if (device_may_wakeup(&ts->spi->dev))
+		disable_irq_wake(ts->spi->irq);
+
 	spin_lock_irq(&ts->lock);
 
 	ts->is_suspended = 0;
@@ -984,6 +991,15 @@
 
 	vref = pdata->keep_vref_on;
 
+	if (ts->model == 7873) {
+		/* The AD7873 is almost identical to the ADS7846
+		 * keep VREF off during differential/ratiometric
+		 * conversion modes
+		 */
+		ts->model = 7846;
+		vref = 0;
+	}
+
 	/* set up the transfers to read touchscreen state; this assumes we
 	 * use formula #2 for pressure, not #3.
 	 */
@@ -1191,6 +1207,8 @@
 	if (err)
 		goto err_remove_attr_group;
 
+	device_init_wakeup(&spi->dev, pdata->wakeup);
+
 	return 0;
 
  err_remove_attr_group:
@@ -1220,6 +1238,8 @@
 {
 	struct ads7846		*ts = dev_get_drvdata(&spi->dev);
 
+	device_init_wakeup(&spi->dev, false);
+
 	ads784x_hwmon_unregister(spi, ts);
 	input_unregister_device(ts->input);
 
diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c
index 09095c7..f0bc6fa 100644
--- a/drivers/isdn/hardware/mISDN/mISDNisar.c
+++ b/drivers/isdn/hardware/mISDN/mISDNisar.c
@@ -1712,13 +1712,13 @@
 }
 EXPORT_SYMBOL(mISDNisar_init);
 
-static int isar_mod_init(void)
+static int __init isar_mod_init(void)
 {
 	pr_notice("mISDN: ISAR driver Rev. %s\n", ISAR_REV);
 	return 0;
 }
 
-static void isar_mod_cleanup(void)
+static void __exit isar_mod_cleanup(void)
 {
 	pr_notice("mISDN: ISAR module unloaded\n");
 }
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index adb1e8c..00c60e2 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -1347,7 +1347,7 @@
 /*
  * isdn net devices manage lots of configuration variables as linked lists.
  * Those lists must only be manipulated from user space. Some of the ioctl's
- * service routines access user space and are not atomic. Therefor, ioctl's
+ * service routines access user space and are not atomic. Therefore, ioctl's
  * manipulating the lists and ioctl's sleeping while accessing the lists
  * are serialized by means of a semaphore.
  */
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 43ff4d3..6eac588 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -1114,7 +1114,7 @@
 	.create = dspcreate
 };
 
-static int dsp_init(void)
+static int __init dsp_init(void)
 {
 	int err;
 	int tics;
@@ -1212,7 +1212,7 @@
 }
 
 
-static void dsp_cleanup(void)
+static void __exit dsp_cleanup(void)
 {
 	mISDN_unregister_Bprotocol(&DSP);
 
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index f1e8af5..325b1ad 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -477,7 +477,7 @@
 		printk(KERN_DEBUG "%s: received frame, parsing... (%d)\n",
 			__func__, len);
 
-	/* check lenght */
+	/* check length */
 	if (len < 1+1+2) {
 		printk(KERN_WARNING "%s: packet error - length %d below "
 			"4 bytes\n", __func__, len);
@@ -1509,7 +1509,7 @@
 			printk(KERN_DEBUG "%s: interface %d is %s with %s.\n",
 			    __func__, l1oip_cnt, pri ? "PRI" : "BRI",
 			    bundle ? "bundled IP packet for all B-channels" :
-			    "seperate IP packets for every B-channel");
+			    "separate IP packets for every B-channel");
 
 		hc = kzalloc(sizeof(struct l1oip), GFP_ATOMIC);
 		if (!hc) {
diff --git a/drivers/isdn/sc/hardware.h b/drivers/isdn/sc/hardware.h
index 9e6d530..6273248 100644
--- a/drivers/isdn/sc/hardware.h
+++ b/drivers/isdn/sc/hardware.h
@@ -87,7 +87,7 @@
 #define BRI_CHANNELS	2		/* Number of B channels */
 #define BRI_BASEPG_VAL	0x98
 #define BRI_MAGIC	0x60000		/* Magic Number */
-#define BRI_MEMSIZE	0x10000		/* Ammount of RAM (64K) */
+#define BRI_MEMSIZE	0x10000		/* Amount of RAM (64K) */
 #define BRI_PARTNO	"72-029"
 #define BRI_FEATURES	ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
 /*
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 5738d8b..921373e 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -948,10 +948,16 @@
 		printk(KERN_WARNING "Warning ! Temperature way above maximum (%d) !\n",
 		       temp_combi >> 16);
 		state0->overtemp += CPU_MAX_OVERTEMP / 4;
-	} else if (temp_combi > (state0->mpu.tmax << 16))
+	} else if (temp_combi > (state0->mpu.tmax << 16)) {
 		state0->overtemp++;
-	else
+		printk(KERN_WARNING "Temperature %d above max %d. overtemp %d\n",
+		       temp_combi >> 16, state0->mpu.tmax, state0->overtemp);
+	} else {
+		if (state0->overtemp)
+			printk(KERN_WARNING "Temperature back down to %d\n",
+			       temp_combi >> 16);
 		state0->overtemp = 0;
+	}
 	if (state0->overtemp >= CPU_MAX_OVERTEMP)
 		critical_state = 1;
 	if (state0->overtemp > 0) {
@@ -1023,10 +1029,16 @@
 		       " (%d) !\n",
 		       state->index, temp >> 16);
 		state->overtemp += CPU_MAX_OVERTEMP / 4;
-	} else if (temp > (state->mpu.tmax << 16))
+	} else if (temp > (state->mpu.tmax << 16)) {
 		state->overtemp++;
-	else
+		printk(KERN_WARNING "CPU %d temperature %d above max %d. overtemp %d\n",
+		       state->index, temp >> 16, state->mpu.tmax, state->overtemp);
+	} else {
+		if (state->overtemp)
+			printk(KERN_WARNING "CPU %d temperature back down to %d\n",
+			       state->index, temp >> 16);
 		state->overtemp = 0;
+	}
 	if (state->overtemp >= CPU_MAX_OVERTEMP)
 		critical_state = 1;
 	if (state->overtemp > 0) {
@@ -1085,10 +1097,16 @@
 		       " (%d) !\n",
 		       state->index, temp >> 16);
 		state->overtemp = CPU_MAX_OVERTEMP / 4;
-	} else if (temp > (state->mpu.tmax << 16))
+	} else if (temp > (state->mpu.tmax << 16)) {
 		state->overtemp++;
-	else
+		printk(KERN_WARNING "CPU %d temperature %d above max %d. overtemp %d\n",
+		       state->index, temp >> 16, state->mpu.tmax, state->overtemp);
+	} else {
+		if (state->overtemp)
+			printk(KERN_WARNING "CPU %d temperature back down to %d\n",
+			       state->index, temp >> 16);
 		state->overtemp = 0;
+	}
 	if (state->overtemp >= CPU_MAX_OVERTEMP)
 		critical_state = 1;
 	if (state->overtemp > 0) {
diff --git a/drivers/macintosh/therm_pm72.h b/drivers/macintosh/therm_pm72.h
index 393cc9d..df3680e 100644
--- a/drivers/macintosh/therm_pm72.h
+++ b/drivers/macintosh/therm_pm72.h
@@ -269,7 +269,7 @@
 #define CPU_TEMP_HISTORY_SIZE		2
 #define CPU_POWER_HISTORY_SIZE		10
 #define CPU_PID_INTERVAL		1
-#define CPU_MAX_OVERTEMP		30
+#define CPU_MAX_OVERTEMP		90
 
 #define CPUA_PUMP_RPM_INDEX		7
 #define CPUB_PUMP_RPM_INDEX		8
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index 437f55c..419795f 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -321,6 +321,7 @@
 	kref_init(&new_sr->ref);
 	list_add(&new_sr->link, &wf_sensors);
 
+	sysfs_attr_init(&new_sr->attr.attr);
 	new_sr->attr.attr.name = new_sr->name;
 	new_sr->attr.attr.mode = 0444;
 	new_sr->attr.show = wf_show_sensor;
diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c
index 6c68b9e..43137b4 100644
--- a/drivers/macintosh/windfarm_smu_controls.c
+++ b/drivers/macintosh/windfarm_smu_controls.c
@@ -173,6 +173,7 @@
 
 	fct->fan_type = pwm_fan;
 	fct->ctrl.type = pwm_fan ? WF_CONTROL_PWM_FAN : WF_CONTROL_RPM_FAN;
+	sysfs_attr_init(&fct->ctrl.attr.attr);
 
 	/* We use the name & location here the same way we do for SMU sensors,
 	 * see the comment in windfarm_smu_sensors.c. The locations are a bit
diff --git a/drivers/md/dm-sysfs.c b/drivers/md/dm-sysfs.c
index f91b409..84d2b91 100644
--- a/drivers/md/dm-sysfs.c
+++ b/drivers/md/dm-sysfs.c
@@ -75,7 +75,7 @@
 	NULL,
 };
 
-static struct sysfs_ops dm_sysfs_ops = {
+static const struct sysfs_ops dm_sysfs_ops = {
 	.show	= dm_attr_show,
 };
 
diff --git a/drivers/md/md.c b/drivers/md/md.c
index a20a71e..fdc1890 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2642,7 +2642,7 @@
 	mdk_rdev_t *rdev = container_of(ko, mdk_rdev_t, kobj);
 	kfree(rdev);
 }
-static struct sysfs_ops rdev_sysfs_ops = {
+static const struct sysfs_ops rdev_sysfs_ops = {
 	.show		= rdev_attr_show,
 	.store		= rdev_attr_store,
 };
@@ -4059,7 +4059,7 @@
 	kfree(mddev);
 }
 
-static struct sysfs_ops md_sysfs_ops = {
+static const struct sysfs_ops md_sysfs_ops = {
 	.show	= md_attr_show,
 	.store	= md_attr_store,
 };
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 0903f53..0a3b4ed 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -123,7 +123,7 @@
  * If the key is not found, returns -EINVAL, otherwise, returns 0.
  */
 static int ir_getkeycode(struct input_dev *dev,
-			 int scancode, int *keycode)
+			 unsigned int scancode, unsigned int *keycode)
 {
 	int elem;
 	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
@@ -291,7 +291,7 @@
  * If the key is not found, returns -EINVAL, otherwise, returns 0.
  */
 static int ir_setkeycode(struct input_dev *dev,
-			 int scancode, int keycode)
+			 unsigned int scancode, unsigned int keycode)
 {
 	int rc = 0;
 	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 52e4ce4..80dda30 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -214,14 +214,14 @@
 	int (*get_status)(struct dvb_frontend *fe, u32 *status);
 	int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength);
 
-	/** These are provided seperately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter seperately. */
+	/** These are provided separately from set_params in order to facilitate silicon
+	 * tuners which require sophisticated tuning loops, controlling each parameter separately. */
 	int (*set_frequency)(struct dvb_frontend *fe, u32 frequency);
 	int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
 
 	/*
-	 * These are provided seperately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter seperately.
+	 * These are provided separately from set_params in order to facilitate silicon
+	 * tuners which require sophisticated tuning loops, controlling each parameter separately.
 	 */
 	int (*set_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
 	int (*get_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index a03ef7e..852fe89 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -9,7 +9,7 @@
 #include <linux/usb/input.h>
 
 static int dvb_usb_getkeycode(struct input_dev *dev,
-				    int scancode, int *keycode)
+				unsigned int scancode, unsigned int *keycode)
 {
 	struct dvb_usb_device *d = input_get_drvdata(dev);
 
@@ -39,7 +39,7 @@
 }
 
 static int dvb_usb_setkeycode(struct input_dev *dev,
-				    int scancode, int keycode)
+				unsigned int scancode, unsigned int keycode)
 {
 	struct dvb_usb_device *d = input_get_drvdata(dev);
 
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 12279f6..716870ae 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -4404,7 +4404,7 @@
 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
  *
  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
- * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
+ * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
  * chips, ten eight input analog multiplexors, a not chip and a few
  * other components.
  *
@@ -4426,7 +4426,7 @@
  *
  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
  * determined what function (if any) it provides.  With the microcontroller
- * and sync seperator chips a guess is that it might have to do with video
+ * and sync separator chips a guess is that it might have to do with video
  * switching and maybe some digital I/O.
  */
 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index bc4ced6..f36e11a 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -512,7 +512,7 @@
 /*
  * The FX2 chip does not give us a zero length read at end of frame.
  * It does, however, give a short read at the end of a frame, if
- * neccessary, rather than run two frames together.
+ * necessary, rather than run two frames together.
  *
  * By choosing the right bulk transfer size, we are guaranteed to always
  * get a short read for the last read of each frame.  Frame sizes are
diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c
index 7400eac..142c327 100644
--- a/drivers/media/video/omap24xxcam.c
+++ b/drivers/media/video/omap24xxcam.c
@@ -1735,7 +1735,7 @@
  *
  */
 
-static int __init omap24xxcam_probe(struct platform_device *pdev)
+static int __devinit omap24xxcam_probe(struct platform_device *pdev)
 {
 	struct omap24xxcam_device *cam;
 	struct resource *mem;
diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt
index f9f3584..d38dd79 100644
--- a/drivers/media/video/pwc/philips.txt
+++ b/drivers/media/video/pwc/philips.txt
@@ -33,7 +33,7 @@
 contains decompression routines that allow you to use higher image sizes and
 framerates; in addition the webcam uses less bandwidth on the USB bus (handy
 if you want to run more than 1 camera simultaneously). These routines fall
-under a NDA, and may therefor not be distributed as source; however, its use
+under a NDA, and may therefore not be distributed as source; however, its use
 is completely optional.
 
 You can build this code either into your kernel, or as a module. I recommend
diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h
index 4af7382d..494957b 100644
--- a/drivers/media/video/sn9c102/sn9c102_sensor.h
+++ b/drivers/media/video/sn9c102/sn9c102_sensor.h
@@ -120,7 +120,7 @@
 /*
    Write multiple registers with constant values. For example:
    sn9c102_write_const_regs(cam, {0x00, 0x14}, {0x60, 0x17}, {0x0f, 0x18});
-   Register adresses must be < 256.
+   Register addresses must be < 256.
 */
 #define sn9c102_write_const_regs(sn9c102_device, data...)                     \
 	({ static const u8 _valreg[][2] = {data};                             \
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index 0446524..6bf6bc7 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -6,7 +6,7 @@
 
     The tea6420 is a bus controlled audio-matrix with 5 stereo inputs,
     4 stereo outputs and gain control for each output.
-    It is cascadable, i.e. it can be found at the adresses 0x98
+    It is cascadable, i.e. it can be found at the addresses 0x98
     and 0x9a on the i2c-bus.
 
     For detailed informations download the specifications directly
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index e5ab621..ef5ce26 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -539,7 +539,7 @@
 		 * which is indeterminate. We need to wait until the IOP has
 		 * rebooted before we can let the system talk to it. We read
 		 * the inbound Free_List until a message is available. If we
-		 * can't read one in the given ammount of time, we assume the
+		 * can't read one in the given amount of time, we assume the
 		 * IOP could not reboot properly.
 		 */
 		osm_debug("%s: Reset in progress, waiting for reboot...\n",
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 951fa9b..2a5a0b7 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -11,7 +11,7 @@
 
 config MFD_88PM860X
 	bool "Support Marvell 88PM8606/88PM8607"
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
 	  This supports for Marvell 88PM8606/88PM8607 Power Management IC.
@@ -205,7 +205,7 @@
 
 config MFD_MAX8925
 	bool "Maxim Semiconductor MAX8925 PMIC Support"
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
 	  Say yes here to support for Maxim Semiconductor MAX8925. This is
@@ -226,7 +226,7 @@
 config MFD_WM831X
 	bool "Support Wolfson Microelectronics WM831x/2x PMICs"
 	select MFD_CORE
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
 	  This driver provides common support for accessing the device,
@@ -235,6 +235,7 @@
 
 config MFD_WM8350
 	bool
+	depends on GENERIC_HARDIRQS
 
 config MFD_WM8350_CONFIG_MODE_0
 	bool
@@ -287,7 +288,7 @@
 config MFD_WM8350_I2C
 	bool "Support Wolfson Microelectronics WM8350 with I2C"
 	select MFD_WM8350
-	depends on I2C=y
+	depends on I2C=y && GENERIC_HARDIRQS
 	help
 	  The WM8350 is an integrated audio and power management
 	  subsystem with watchdog and RTC functionality for embedded
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index dc9ea95..7b6652f 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -523,7 +523,7 @@
 	unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK);
 	unsigned char reg;
 	unsigned int pll_reg = 0;
-	unsigned long sm501_freq; /* the actual frequency acheived */
+	unsigned long sm501_freq; /* the actual frequency achieved */
 
 	struct sm501_clock to;
 
@@ -533,7 +533,7 @@
 
 	switch (clksrc) {
 	case SM501_CLOCK_P2XCLK:
-		/* This clock is divided in half so to achive the
+		/* This clock is divided in half so to achieve the
 		 * requested frequency the value must be multiplied by
 		 * 2. This clock also has an additional pre divisor */
 
@@ -562,7 +562,7 @@
 		break;
 
 	case SM501_CLOCK_V2XCLK:
-		/* This clock is divided in half so to achive the
+		/* This clock is divided in half so to achieve the
 		 * requested frequency the value must be multiplied by 2. */
 
 		sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
@@ -648,7 +648,7 @@
 			       unsigned long req_freq)
 {
 	struct sm501_devdata *sm = dev_get_drvdata(dev);
-	unsigned long sm501_freq; /* the frequency achiveable by the 501 */
+	unsigned long sm501_freq; /* the frequency achieveable by the 501 */
 	struct sm501_clock to;
 
 	switch (clksrc) {
@@ -1430,7 +1430,7 @@
 	}
 
 	sm->regs_claim = request_mem_region(sm->io_res->start,
-					    resource_size(sm->io_res), "sm501");
+					    0x100, "sm501");
 
 	if (sm->regs_claim == NULL) {
 		dev_err(&dev->dev, "cannot claim registers\n");
@@ -1644,7 +1644,7 @@
 	sm->mem_res = &dev->resource[0];
 
 	sm->regs_claim = request_mem_region(sm->io_res->start,
-					    resource_size(sm->io_res), "sm501");
+					    0x100, "sm501");
 	if (sm->regs_claim == NULL) {
 		dev_err(&dev->dev, "cannot claim registers\n");
 		err= -EBUSY;
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index d16af6a..2191c8d 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -268,6 +268,16 @@
 	  This driver can also be built as a module.  If so, the module
 	  will be called isl29003.
 
+config SENSORS_TSL2550
+	tristate "Taos TSL2550 ambient light sensor"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get support for the Taos TSL2550
+	  ambient light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tsl2550.
+
 config EP93XX_PWM
 	tristate "EP93xx PWM support"
 	depends on ARCH_EP93XX
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 049ff24..27c4843 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -21,6 +21,7 @@
 obj-$(CONFIG_CS5535_MFGPT)	+= cs5535-mfgpt.o
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
+obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 obj-$(CONFIG_EP93XX_PWM)	+= ep93xx_pwm.o
 obj-$(CONFIG_DS1682)		+= ds1682.o
 obj-$(CONFIG_TI_DAC7512)	+= ti_dac7512.o
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 2cb2736..db7d0f2 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -505,6 +505,7 @@
 	 * Export the EEPROM bytes through sysfs, since that's convenient.
 	 * By default, only root should see the data (maybe passwords etc)
 	 */
+	sysfs_bin_attr_init(&at24->bin);
 	at24->bin.attr.name = "eeprom";
 	at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
 	at24->bin.read = at24_bin_read;
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index d902d81..d194212 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -347,6 +347,7 @@
 	 * that's sensitive for read and/or write, like ethernet addresses,
 	 * security codes, board-specific manufacturing calibrations, etc.
 	 */
+	sysfs_bin_attr_init(&at25->bin);
 	at25->bin.attr.name = "eeprom";
 	at25->bin.attr.mode = S_IRUSR;
 	at25->bin.read = at25_bin_read;
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index 04c2726..779aa8e 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -497,12 +497,7 @@
 	.resume = phantom_resume
 };
 
-static ssize_t phantom_show_version(struct class *cls, char *buf)
-{
-	return sprintf(buf, PHANTOM_VERSION "\n");
-}
-
-static CLASS_ATTR(version, 0444, phantom_show_version, NULL);
+static CLASS_ATTR_STRING(version, 0444, PHANTOM_VERSION);
 
 static int __init phantom_init(void)
 {
@@ -515,7 +510,7 @@
 		printk(KERN_ERR "phantom: can't register phantom class\n");
 		goto err;
 	}
-	retval = class_create_file(phantom_class, &class_attr_version);
+	retval = class_create_file(phantom_class, &class_attr_version.attr);
 	if (retval) {
 		printk(KERN_ERR "phantom: can't create sysfs version file\n");
 		goto err_class;
@@ -541,7 +536,7 @@
 err_unchr:
 	unregister_chrdev_region(dev, PHANTOM_MAX_MINORS);
 err_attr:
-	class_remove_file(phantom_class, &class_attr_version);
+	class_remove_file(phantom_class, &class_attr_version.attr);
 err_class:
 	class_destroy(phantom_class);
 err:
@@ -554,7 +549,7 @@
 
 	unregister_chrdev_region(MKDEV(phantom_major, 0), PHANTOM_MAX_MINORS);
 
-	class_remove_file(phantom_class, &class_attr_version);
+	class_remove_file(phantom_class, &class_attr_version.attr);
 	class_destroy(phantom_class);
 
 	pr_debug("phantom: module successfully removed\n");
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index 02a77b8..7a8b906 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -516,8 +516,7 @@
 
 /* Scan all active GRUs in a GRU bitmap */
 #define for_each_gru_in_bitmap(gid, map)				\
-	for ((gid) = find_first_bit((map), GRU_MAX_GRUS); (gid) < GRU_MAX_GRUS;\
-		(gid)++, (gid) = find_next_bit((map), GRU_MAX_GRUS, (gid)))
+	for_each_set_bit((gid), (map), GRU_MAX_GRUS)
 
 /* Scan all active GRUs on a specific blade */
 #define for_each_gru_on_blade(gru, nid, i)				\
@@ -536,23 +535,17 @@
 
 /* Scan each CBR whose bit is set in a TFM (or copy of) */
 #define for_each_cbr_in_tfm(i, map)					\
-	for ((i) = find_first_bit(map, GRU_NUM_CBE);			\
-			(i) < GRU_NUM_CBE;				\
-			(i)++, (i) = find_next_bit(map, GRU_NUM_CBE, i))
+	for_each_set_bit((i), (map), GRU_NUM_CBE)
 
 /* Scan each CBR in a CBR bitmap. Note: multiple CBRs in an allocation unit */
 #define for_each_cbr_in_allocation_map(i, map, k)			\
-	for ((k) = find_first_bit(map, GRU_CBR_AU); (k) < GRU_CBR_AU;	\
-			(k) = find_next_bit(map, GRU_CBR_AU, (k) + 1)) 	\
+	for_each_set_bit((k), (map), GRU_CBR_AU)			\
 		for ((i) = (k)*GRU_CBR_AU_SIZE;				\
 				(i) < ((k) + 1) * GRU_CBR_AU_SIZE; (i)++)
 
 /* Scan each DSR in a DSR bitmap. Note: multiple DSRs in an allocation unit */
 #define for_each_dsr_in_allocation_map(i, map, k)			\
-	for ((k) = find_first_bit((const unsigned long *)map, GRU_DSR_AU);\
-			(k) < GRU_DSR_AU;				\
-			(k) = find_next_bit((const unsigned long *)map,	\
-					  GRU_DSR_AU, (k) + 1))		\
+	for_each_set_bit((k), (const unsigned long *)(map), GRU_DSR_AU)	\
 		for ((i) = (k) * GRU_DSR_AU_CL;				\
 				(i) < ((k) + 1) * GRU_DSR_AU_CL; (i)++)
 
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/misc/tsl2550.c
similarity index 99%
rename from drivers/i2c/chips/tsl2550.c
rename to drivers/misc/tsl2550.c
index a0702f3..483ae5f 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/misc/tsl2550.c
@@ -47,8 +47,8 @@
 	struct i2c_client *client;
 	struct mutex update_lock;
 
-	unsigned int power_state : 1;
-	unsigned int operating_mode : 1;
+	unsigned int power_state:1;
+	unsigned int operating_mode:1;
 };
 
 /*
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 3fab78b..723e508 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -575,7 +575,7 @@
 	struct sdio_uart_port *port =
 			container_of(tport, struct sdio_uart_port, port);
 	unsigned int ret = sdio_uart_claim_func(port);
-	if (ret)	/* Missing hardware shoudn't block for carrier */
+	if (ret)	/* Missing hardware shouldn't block for carrier */
 		return 1;
 	ret = sdio_uart_get_mctrl(port);
 	sdio_uart_release_func(port);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f4b97d3..3168ebd 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1089,6 +1089,7 @@
 	mmc_claim_host(host);
 
 	mmc_power_up(host);
+	sdio_reset(host);
 	mmc_go_idle(host);
 
 	mmc_send_if_cond(host, host->ocr_avail);
diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c
index 4eb7825..dea36d9 100644
--- a/drivers/mmc/core/sdio_ops.c
+++ b/drivers/mmc/core/sdio_ops.c
@@ -67,13 +67,13 @@
 	return err;
 }
 
-int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
-	unsigned addr, u8 in, u8* out)
+static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn,
+	unsigned addr, u8 in, u8 *out)
 {
 	struct mmc_command cmd;
 	int err;
 
-	BUG_ON(!card);
+	BUG_ON(!host);
 	BUG_ON(fn > 7);
 
 	/* sanity check */
@@ -90,11 +90,11 @@
 	cmd.arg |= in;
 	cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
 
-	err = mmc_wait_for_cmd(card->host, &cmd, 0);
+	err = mmc_wait_for_cmd(host, &cmd, 0);
 	if (err)
 		return err;
 
-	if (mmc_host_is_spi(card->host)) {
+	if (mmc_host_is_spi(host)) {
 		/* host driver already reported errors */
 	} else {
 		if (cmd.resp[0] & R5_ERROR)
@@ -106,7 +106,7 @@
 	}
 
 	if (out) {
-		if (mmc_host_is_spi(card->host))
+		if (mmc_host_is_spi(host))
 			*out = (cmd.resp[0] >> 8) & 0xFF;
 		else
 			*out = cmd.resp[0] & 0xFF;
@@ -115,6 +115,13 @@
 	return 0;
 }
 
+int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
+	unsigned addr, u8 in, u8 *out)
+{
+	BUG_ON(!card);
+	return mmc_io_rw_direct_host(card->host, write, fn, addr, in, out);
+}
+
 int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
 	unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
 {
@@ -182,3 +189,20 @@
 	return 0;
 }
 
+int sdio_reset(struct mmc_host *host)
+{
+	int ret;
+	u8 abort;
+
+	/* SDIO Simplified Specification V2.0, 4.4 Reset for SDIO */
+
+	ret = mmc_io_rw_direct_host(host, 0, 0, SDIO_CCCR_ABORT, 0, &abort);
+	if (ret)
+		abort = 0x08;
+	else
+		abort |= 0x08;
+
+	ret = mmc_io_rw_direct_host(host, 1, 0, SDIO_CCCR_ABORT, abort, NULL);
+	return ret;
+}
+
diff --git a/drivers/mmc/core/sdio_ops.h b/drivers/mmc/core/sdio_ops.h
index e2e74b0..12a4d3a 100644
--- a/drivers/mmc/core/sdio_ops.h
+++ b/drivers/mmc/core/sdio_ops.h
@@ -17,6 +17,7 @@
 	unsigned addr, u8 in, u8* out);
 int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
 	unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz);
+int sdio_reset(struct mmc_host *host);
 
 #endif
 
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index b31946e..4c068e5 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -1250,9 +1250,7 @@
 
 		if (mmc->card && mmc->card->type != MMC_TYPE_SDIO)
 			mmc_resume_host(mmc);
-			if (host->stat_irq)
-				enable_irq(host->stat_irq);
-		else if (host->stat_irq)
+		if (host->stat_irq)
 			enable_irq(host->stat_irq);
 	}
 	return 0;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 60a2b69..2df9041 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -4,7 +4,7 @@
  *  This is a driver for the SDHC controller found in Freescale MX2/MX3
  *  SoCs. It is basically the same hardware as found on MX1 (imxmmc.c).
  *  Unlike the hardware found on MX1, this hardware just works and does
- *  not need all the quirks found in imxmmc.c, hence the seperate driver.
+ *  not need all the quirks found in imxmmc.c, hence the separate driver.
  *
  *  Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
  *  Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
@@ -708,7 +708,7 @@
 	mmc->max_blk_size = 2048;
 	mmc->max_blk_count = 65535;
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
-	mmc->max_seg_size = mmc->max_seg_size;
+	mmc->max_seg_size = mmc->max_req_size;
 
 	host = mmc_priv(mmc);
 	host->base = ioremap(r->start, resource_size(r));
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
old mode 100755
new mode 100644
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 1bec5e1..8db1148 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -226,7 +226,7 @@
  * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore,
  * should not be used.  The  problem is that structures with
  * initializers have extra fields initialized to 0.  It is _very_
- * desireable to have the unlock address entries for unsupported
+ * desirable to have the unlock address entries for unsupported
  * data widths automatically initialized - that means that
  * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here
  * must go unused.
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
old mode 100755
new mode 100644
diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c
index c48cad2..30e12c8 100644
--- a/drivers/mtd/maps/pismo.c
+++ b/drivers/mtd/maps/pismo.c
@@ -118,7 +118,7 @@
 {
 	struct platform_device *dev;
 	struct resource res = { };
-	phys_addr_t base = region.base;
+	phys_addr_t base = region->base;
 	int ret;
 
 	if (base == ~0)
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index dafb919..76a76be 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -4,7 +4,7 @@
  *	http://www.simtec.co.uk/products/SWLINUX/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Generic platfrom device based RAM map
+ * Generic platform device based RAM map
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index bb64656..1157d56 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -444,7 +444,7 @@
 
 config MTD_NAND_MXC
 	tristate "MXC NAND support"
-	depends on ARCH_MX2 || ARCH_MX3
+	depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3
 	help
 	  This enables the driver for the NAND flash controller on the
 	  MXC processors.
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index 087bcd7..7d1cca7a 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -381,7 +381,7 @@
 	if (!r)
 		return -ENXIO;
 
-	/* map physical adress */
+	/* map physical address */
 	bcm_umi_io_base = ioremap(r->start, r->end - r->start + 1);
 
 	if (!bcm_umi_io_base) {
@@ -525,7 +525,7 @@
 	/* Release resources, unregister device */
 	nand_release(board_mtd);
 
-	/* unmap physical adress */
+	/* unmap physical address */
 	iounmap(bcm_umi_io_base);
 
 	/* Free the MTD device structure */
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 45dec57..b2900d8 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -507,7 +507,7 @@
 		 * MXC NANDFC can only perform full page+spare or
 		 * spare-only read/write.  When the upper layers
 		 * layers perform a read/write buf operation,
-		 * we will used the saved column adress to index into
+		 * we will used the saved column address to index into
 		 * the full page.
 		 */
 		send_addr(host, 0, page_addr == -1);
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index bc45ef9..fad40aa 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -89,7 +89,8 @@
 static DEFINE_SPINLOCK(ubi_devices_lock);
 
 /* "Show" method for files in '/<sysfs>/class/ubi/' */
-static ssize_t ubi_version_show(struct class *class, char *buf)
+static ssize_t ubi_version_show(struct class *class, struct class_attribute *attr,
+				char *buf)
 {
 	return sprintf(buf, "%d\n", UBI_VERSION);
 }
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7029cd5..0ba5b8e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -907,7 +907,7 @@
 	select CRC32
 	select MII
 	depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
-		MIPS || BLACKFIN || MN10300
+		MIPS || BLACKFIN || MN10300 || COLDFIRE
 	help
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 8ca6391..a1d4188 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -575,9 +575,9 @@
 	if (work_done < budget) {
 		unsigned long flags;
 		spin_lock_irqsave(&ksp->rx_lock, flags);
+		__napi_complete(napi);
 		/*enable rx interrupt*/
 		writel(isr | mask_bit, KS8695_IRQ_VA + KS8695_INTEN);
-		__napi_complete(napi);
 		spin_unlock_irqrestore(&ksp->rx_lock, flags);
 	}
 	return work_done;
diff --git a/drivers/net/atlx/atl2.h b/drivers/net/atlx/atl2.h
index d918bbe..927e4de 100644
--- a/drivers/net/atlx/atl2.h
+++ b/drivers/net/atlx/atl2.h
@@ -442,7 +442,7 @@
 struct atl2_ring_header {
     /* pointer to the descriptor ring memory */
     void *desc;
-    /* physical adress of the descriptor ring */
+    /* physical address of the descriptor ring */
     dma_addr_t dma;
     /* length of descriptor ring in bytes */
     unsigned int size;
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index be81fb2..8f07525 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -290,11 +290,6 @@
 
 #define drvr_stats(adapter)		(&adapter->stats.drvr_stats)
 
-static inline unsigned int be_pci_func(struct be_adapter *adapter)
-{
-	return PCI_FUNC(adapter->pdev->devfn);
-}
-
 #define BE_SET_NETDEV_OPS(netdev, ops)	(netdev->netdev_ops = ops)
 
 #define PAGE_SHIFT_4K		12
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 4b1f805..c592153 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -465,8 +465,6 @@
 
 	req->num_pages =  cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
 
-	AMAP_SET_BITS(struct amap_eq_context, func, req->context,
-			be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1);
 	/* 4byte eqe*/
 	AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0);
@@ -629,7 +627,6 @@
 	AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
 	AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
 	AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
-	AMAP_SET_BITS(struct amap_cq_context, func, ctxt, be_pci_func(adapter));
 	be_dws_cpu_to_le(ctxt, sizeof(req->context));
 
 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
@@ -678,7 +675,6 @@
 
 	req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
 
-	AMAP_SET_BITS(struct amap_mcc_context, fid, ctxt, be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_mcc_context, valid, ctxt, 1);
 	AMAP_SET_BITS(struct amap_mcc_context, ring_size, ctxt,
 		be_encoded_q_len(mccq->len));
@@ -727,8 +723,6 @@
 
 	AMAP_SET_BITS(struct amap_tx_context, tx_ring_size, ctxt,
 		be_encoded_q_len(txq->len));
-	AMAP_SET_BITS(struct amap_tx_context, pci_func_id, ctxt,
-			be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_tx_context, ctx_valid, ctxt, 1);
 	AMAP_SET_BITS(struct amap_tx_context, cq_id_send, ctxt, cq->id);
 
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index 5ffb149..2d4a4b8 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -114,8 +114,7 @@
 #define IMG_TYPE_ISCSI_BACKUP		9
 #define IMG_TYPE_FCOE_FW_ACTIVE		10
 #define IMG_TYPE_FCOE_FW_BACKUP 	11
-#define IMG_TYPE_NCSI_BITFILE		13
-#define IMG_TYPE_NCSI_8051		14
+#define IMG_TYPE_NCSI_FW		13
 
 #define FLASHROM_OPER_FLASH		1
 #define FLASHROM_OPER_SAVE		2
@@ -127,6 +126,7 @@
 #define FLASH_IMAGE_MAX_SIZE_g3            (2097152) /* Max fw image size */
 #define FLASH_BIOS_IMAGE_MAX_SIZE_g3       (524288)  /* Max OPTION ROM img sz */
 #define FLASH_REDBOOT_IMAGE_MAX_SIZE_g3	  (1048576)  /* Max Redboot image sz */
+#define FLASH_NCSI_IMAGE_MAX_SIZE_g3       (262144)  /* Max NSCI image sz */
 
 #define FLASH_NCSI_MAGIC		(0x16032009)
 #define FLASH_NCSI_DISABLED		(0)
@@ -144,6 +144,7 @@
 #define FLASH_FCoE_BIOS_START_g2           (524288)
 #define FLASH_REDBOOT_START_g2		  (0)
 
+#define FLASH_NCSI_START_g3		   (15990784)
 #define FLASH_iSCSI_PRIMARY_IMAGE_START_g3 (2097152)
 #define FLASH_iSCSI_BACKUP_IMAGE_START_g3  (4194304)
 #define FLASH_FCoE_PRIMARY_IMAGE_START_g3  (6291456)
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index a703ed8..43e8032 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1382,7 +1382,7 @@
 /* There are 8 evt ids per func. Retruns the evt id's bit number */
 static inline int be_evt_bit_get(struct be_adapter *adapter, u32 eq_id)
 {
-	return eq_id - 8 * be_pci_func(adapter);
+	return eq_id % 8;
 }
 
 static irqreturn_t be_intx(int irq, void *dev)
@@ -1880,8 +1880,9 @@
 	const u8 *p = fw->data;
 	struct be_cmd_write_flashrom *req = flash_cmd->va;
 	struct flash_comp *pflashcomp;
+	int num_comp;
 
-	struct flash_comp gen3_flash_types[8] = {
+	struct flash_comp gen3_flash_types[9] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g3, IMG_TYPE_ISCSI_ACTIVE,
 			FLASH_IMAGE_MAX_SIZE_g3},
 		{ FLASH_REDBOOT_START_g3, IMG_TYPE_REDBOOT,
@@ -1897,7 +1898,9 @@
 		{ FLASH_FCoE_PRIMARY_IMAGE_START_g3, IMG_TYPE_FCOE_FW_ACTIVE,
 			FLASH_IMAGE_MAX_SIZE_g3},
 		{ FLASH_FCoE_BACKUP_IMAGE_START_g3, IMG_TYPE_FCOE_FW_BACKUP,
-			FLASH_IMAGE_MAX_SIZE_g3}
+			FLASH_IMAGE_MAX_SIZE_g3},
+		{ FLASH_NCSI_START_g3, IMG_TYPE_NCSI_FW,
+			FLASH_NCSI_IMAGE_MAX_SIZE_g3}
 	};
 	struct flash_comp gen2_flash_types[8] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g2, IMG_TYPE_ISCSI_ACTIVE,
@@ -1921,11 +1924,16 @@
 	if (adapter->generation == BE_GEN3) {
 		pflashcomp = gen3_flash_types;
 		filehdr_size = sizeof(struct flash_file_hdr_g3);
+		num_comp = 9;
 	} else {
 		pflashcomp = gen2_flash_types;
 		filehdr_size = sizeof(struct flash_file_hdr_g2);
+		num_comp = 8;
 	}
-	for (i = 0; i < 8; i++) {
+	for (i = 0; i < num_comp; i++) {
+		if ((pflashcomp[i].optype == IMG_TYPE_NCSI_FW) &&
+				memcmp(adapter->fw_ver, "3.102.148.0", 11) < 0)
+			continue;
 		if ((pflashcomp[i].optype == IMG_TYPE_REDBOOT) &&
 			(!be_flash_redboot(adapter, fw->data,
 			 pflashcomp[i].offset, pflashcomp[i].size,
@@ -1985,16 +1993,7 @@
 	struct be_dma_mem flash_cmd;
 	int status, i = 0;
 	const u8 *p;
-	char fw_ver[FW_VER_LEN];
-	char fw_cfg;
 
-	status = be_cmd_get_fw_ver(adapter, fw_ver);
-	if (status)
-		return status;
-
-	fw_cfg = *(fw_ver + 2);
-	if (fw_cfg == '0')
-		fw_cfg = '1';
 	strcpy(fw_file, func);
 
 	status = request_firmware(&fw, fw_file, &adapter->pdev->dev);
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 5acd557..b8bec08 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -51,7 +51,9 @@
  * "show" function for the bond_masters attribute.
  * The class parameter is ignored.
  */
-static ssize_t bonding_show_bonds(struct class *cls, char *buf)
+static ssize_t bonding_show_bonds(struct class *cls,
+				  struct class_attribute *attr,
+				  char *buf)
 {
 	struct net *net = current->nsproxy->net_ns;
 	struct bond_net *bn = net_generic(net, bond_net_id);
@@ -98,6 +100,7 @@
  */
 
 static ssize_t bonding_store_bonds(struct class *cls,
+				   struct class_attribute *attr,
 				   const char *buffer, size_t count)
 {
 	struct net *net = current->nsproxy->net_ns;
diff --git a/drivers/net/can/bfin_can.c b/drivers/net/can/bfin_can.c
index bf7f9ba..866905f 100644
--- a/drivers/net/can/bfin_can.c
+++ b/drivers/net/can/bfin_can.c
@@ -26,6 +26,7 @@
 
 #define DRV_NAME "bfin_can"
 #define BFIN_CAN_TIMEOUT 100
+#define TX_ECHO_SKB_MAX  1
 
 /*
  * transmit and receive channels
@@ -593,7 +594,7 @@
 	struct net_device *dev;
 	struct bfin_can_priv *priv;
 
-	dev = alloc_candev(sizeof(*priv));
+	dev = alloc_candev(sizeof(*priv), TX_ECHO_SKB_MAX);
 	if (!dev)
 		return NULL;
 
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index 11c8784..3345109 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -876,9 +876,7 @@
 	return NETDEV_TX_OK;
 
 nomem:
-	if (skb)
-		dev_kfree_skb(skb);
-
+	dev_kfree_skb(skb);
 	stats->tx_dropped++;
 
 	return NETDEV_TX_OK;
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 7cbcfb0..9bd155e 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -5072,7 +5072,7 @@
 	INIT_WORK(&cp->reset_task, cas_reset_task);
 
 	/* Default link parameters */
-	if (link_mode >= 0 && link_mode <= 6)
+	if (link_mode >= 0 && link_mode < 6)
 		cp->link_cntl = link_modes[link_mode];
 	else
 		cp->link_cntl = BMCR_ANENABLE;
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 7138411..55d99ca 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -248,7 +248,7 @@
  *
  * Interrupts are handled by a single CPU and it is likely that on a MP system
  * the application is migrated to another CPU. In that scenario, we try to
- * seperate the RX(in irq context) and TX state in order to decrease memory
+ * separate the RX(in irq context) and TX state in order to decrease memory
  * contention.
  */
 struct sge {
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index b85c81f..60777fd 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 
 #include <linux/netdevice.h>
+#include <linux/if_vlan.h>
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/skbuff.h>
@@ -55,9 +56,9 @@
 MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable");
 MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus");
 
-#define CPMAC_VERSION "0.5.1"
-/* frame size + 802.1q tag */
-#define CPMAC_SKB_SIZE		(ETH_FRAME_LEN + 4)
+#define CPMAC_VERSION "0.5.2"
+/* frame size + 802.1q tag + FCS size */
+#define CPMAC_SKB_SIZE		(ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN)
 #define CPMAC_QUEUES	8
 
 /* Ethernet registers */
@@ -1136,8 +1137,9 @@
 	}
 
 	if (phy_id == PHY_MAX_ADDR) {
-		dev_err(&pdev->dev, "no PHY present\n");
-		return -ENODEV;
+		dev_err(&pdev->dev, "no PHY present, falling back to switch on MDIO bus 0\n");
+		strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+		phy_id = pdev->id;
 	}
 
 	dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
@@ -1290,8 +1292,8 @@
 {
 	platform_driver_unregister(&cpmac_driver);
 	mdiobus_unregister(cpmac_mii);
-	mdiobus_free(cpmac_mii);
 	iounmap(cpmac_mii->priv);
+	mdiobus_free(cpmac_mii);
 }
 
 module_init(cpmac_init);
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 1462401..b0208e4 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -580,7 +580,7 @@
 	}
 
 #ifdef CONFIG_SH_HICOSH4
-	/* truely reset the chip */
+	/* truly reset the chip */
 	writeword(ioaddr, ADD_PORT, 0x0114);
 	writeword(ioaddr, DATA_PORT, 0x0040);
 #endif
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 3e453e1..9e3e875 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1294,6 +1294,7 @@
 
 	free_irq_resources(adapter);
 	quiesce_rx(adapter);
+	t3_sge_stop(adapter);
 	flush_workqueue(cxgb3_wq);	/* wait for external IRQ handler */
 }
 
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 78e265b..67e61b2 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -197,13 +197,13 @@
 /**
  *	need_skb_unmap - does the platform need unmapping of sk_buffs?
  *
- *	Returns true if the platfrom needs sk_buff unmapping.  The compiler
+ *	Returns true if the platform needs sk_buff unmapping.  The compiler
  *	optimizes away unecessary code if this returns true.
  */
 static inline int need_skb_unmap(void)
 {
 	/*
-	 * This structure is used to tell if the platfrom needs buffer
+	 * This structure is used to tell if the platform needs buffer
 	 * unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything.
 	 */
 	struct dummy {
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 1ac9440e..8bd086a 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -2385,7 +2385,7 @@
 	struct emac_priv *priv = netdev_priv(ndev);
 
 	netif_carrier_off(ndev);
-	for (cnt = 0; cnt <= ETH_ALEN; cnt++)
+	for (cnt = 0; cnt < ETH_ALEN; cnt++)
 		ndev->dev_addr[cnt] = priv->mac_addr[cnt];
 
 	/* Configuration items */
@@ -2658,7 +2658,7 @@
 
 	pdata = pdev->dev.platform_data;
 	if (!pdata) {
-		printk(KERN_ERR "DaVinci EMAC: No platfrom data\n");
+		printk(KERN_ERR "DaVinci EMAC: No platform data\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 3c95acb..712ccc6 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1346,7 +1346,7 @@
  *
  *  1) down
  *  2) autoneg_progress
- *  3) autoneg_complete (the link sucessfully autonegotiated)
+ *  3) autoneg_complete (the link successfully autonegotiated)
  *  4) forced_up (the link has been forced up, it did not autonegotiate)
  *
  **/
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index db05ec3..e301e26 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -320,6 +320,8 @@
 #define E1000_RXCSUM_IPPCSE    0x00001000   /* IP payload checksum enable */
 
 /* Header split receive */
+#define E1000_RFCTL_NFSW_DIS            0x00000040
+#define E1000_RFCTL_NFSR_DIS            0x00000080
 #define E1000_RFCTL_ACK_DIS             0x00001000
 #define E1000_RFCTL_EXTEN               0x00008000
 #define E1000_RFCTL_IPV6_EX_DIS         0x00010000
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 54d03a0..8b5e157 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -2740,6 +2740,16 @@
 		reg &= ~(1 << 31);
 		ew32(STATUS, reg);
 	}
+
+	/*
+	 * work-around descriptor data corruption issue during nfs v2 udp
+	 * traffic, just disable the nfs filtering capability
+	 */
+	reg = er32(RFCTL);
+	reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS);
+	ew32(RFCTL, reg);
+
+	return;
 }
 
 /**
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 2425ed1..a8b2c0d 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -647,7 +647,7 @@
 				if (!(rxcw & E1000_RXCW_IV)) {
 					mac->serdes_has_link = true;
 					e_dbg("SERDES: Link up - autoneg "
-					   "completed sucessfully.\n");
+					   "completed successfully.\n");
 				} else {
 					mac->serdes_has_link = false;
 					e_dbg("SERDES: Link down - invalid"
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 61a7b43..b671555 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -2021,7 +2021,6 @@
 	}
 
 	/* setup the TxBD length and buffer pointer for the first BD */
-	tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
 	txbdp_start->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data,
 			skb_headlen(skb), DMA_TO_DEVICE);
 
@@ -2053,6 +2052,10 @@
 
 	txbdp_start->lstatus = lstatus;
 
+	eieio(); /* force lstatus write before tx_skbuff */
+
+	tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
+
 	/* Update the current skb pointer to the next entry we will use
 	 * (wrapping if necessary) */
 	tx_queue->skb_curtx = (tx_queue->skb_curtx + 1) &
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index f2b93796..0bc777ba 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -1577,7 +1577,7 @@
 	NULL,
 };
 
-static struct sysfs_ops veth_pool_ops = {
+static const struct sysfs_ops veth_pool_ops = {
 	.show   = veth_pool_show,
 	.store  = veth_pool_store,
 };
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 583a21c..0ed25f0 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -688,7 +688,7 @@
 	/* start with one vector for every rx queue */
 	numvecs = adapter->num_rx_queues;
 
-	/* if tx handler is seperate add 1 for every tx queue */
+	/* if tx handler is separate add 1 for every tx queue */
 	if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
 		numvecs += adapter->num_tx_queues;
 
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index e8e33bb..2c9b3af 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1651,6 +1651,8 @@
 
 	self->rx_urb = kcalloc(self->max_rx_urb, sizeof(struct urb *),
 				GFP_KERNEL);
+	if (!self->rx_urb)
+		goto err_free_net;
 
 	for (i = 0; i < self->max_rx_urb; i++) {
 		self->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
@@ -1783,6 +1785,8 @@
 err_out_1:
 	for (i = 0; i < self->max_rx_urb; i++)
 		usb_free_urb(self->rx_urb[i]);
+	kfree(self->rx_urb);
+err_free_net:
 	free_netdev(net);
 err_out:
 	return ret;
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index c412e80..1dcdce0 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -331,7 +331,7 @@
 		 * If we missed a speed change, initialise at the new speed
 		 * directly.  It is debatable whether this is actually
 		 * required, but in the interests of continuing from where
-		 * we left off it is desireable.  The converse argument is
+		 * we left off it is desirable.  The converse argument is
 		 * that we should re-negotiate at 9600 baud again.
 		 */
 		if (si->newspeed) {
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 966de5d..e6e972d 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -384,7 +384,7 @@
 	NULL
 };
 
-static struct sysfs_ops veth_cnx_sysfs_ops = {
+static const struct sysfs_ops veth_cnx_sysfs_ops = {
 		.show = veth_cnx_attribute_show
 };
 
@@ -441,7 +441,7 @@
 	NULL
 };
 
-static struct sysfs_ops veth_port_sysfs_ops = {
+static const struct sysfs_ops veth_port_sysfs_ops = {
 	.show = veth_port_attribute_show
 };
 
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index b5219cc..0573e0b 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -407,7 +407,7 @@
  * @buff: The buffer address
  * @len: The length of the data to read
  *
- * Issue an RXQ FIFO read command and read the @len ammount of data from
+ * Issue an RXQ FIFO read command and read the @len amount of data from
  * the FIFO into the buffer specified by @buff.
  */
 static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len)
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index b40a851..0da94b20 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -423,6 +423,11 @@
 	u64  lro_pkts;
 	u64  rxbytes;
 	u64  txbytes;
+	u64  lrobytes;
+	u64  lso_frames;
+	u64  xmit_on;
+	u64  xmit_off;
+	u64  skb_alloc_failure;
 };
 
 /*
@@ -1095,11 +1100,11 @@
 
 static const struct qlcnic_brdinfo qlcnic_boards[] = {
 	{0x1077, 0x8020, 0x1077, 0x203,
-		"8200 Series Single Port 10GbE Converged Network Adapter \
-		(TCP/IP Networking)"},
+		"8200 Series Single Port 10GbE Converged Network Adapter "
+		"(TCP/IP Networking)"},
 	{0x1077, 0x8020, 0x1077, 0x207,
-		"8200 Series Dual Port 10GbE Converged Network Adapter \
-		(TCP/IP Networking)"},
+		"8200 Series Dual Port 10GbE Converged Network Adapter "
+		"(TCP/IP Networking)"},
 	{0x1077, 0x8020, 0x1077, 0x20b,
 		"3200 Series Dual Port 10Gb Intelligent Ethernet Adapter"},
 	{0x1077, 0x8020, 0x1077, 0x20c,
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index 8da6ec8..f83e15f 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -59,6 +59,17 @@
 		QLC_SIZEOF(stats.rxbytes), QLC_OFF(stats.rxbytes)},
 	{"tx_bytes",
 		QLC_SIZEOF(stats.txbytes), QLC_OFF(stats.txbytes)},
+	{"lrobytes",
+		QLC_SIZEOF(stats.lrobytes), QLC_OFF(stats.lrobytes)},
+	{"lso_frames",
+		QLC_SIZEOF(stats.lso_frames), QLC_OFF(stats.lso_frames)},
+	{"xmit_on",
+		QLC_SIZEOF(stats.xmit_on), QLC_OFF(stats.xmit_on)},
+	{"xmit_off",
+		QLC_SIZEOF(stats.xmit_off), QLC_OFF(stats.xmit_off)},
+	{"skb_alloc_failure", QLC_SIZEOF(stats.skb_alloc_failure),
+		QLC_OFF(stats.skb_alloc_failure)},
+
 };
 
 #define QLCNIC_STATS_LEN	ARRAY_SIZE(qlcnic_gstrings_stats)
@@ -785,6 +796,11 @@
 	}
 }
 
+static u32 qlcnic_get_tx_csum(struct net_device *dev)
+{
+	return dev->features & NETIF_F_IP_CSUM;
+}
+
 static u32 qlcnic_get_rx_csum(struct net_device *dev)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(dev);
@@ -995,6 +1011,7 @@
 	.set_ringparam = qlcnic_set_ringparam,
 	.get_pauseparam = qlcnic_get_pauseparam,
 	.set_pauseparam = qlcnic_set_pauseparam,
+	.get_tx_csum = qlcnic_get_tx_csum,
 	.set_tx_csum = ethtool_op_set_tx_csum,
 	.set_sg = ethtool_op_set_sg,
 	.get_tso = qlcnic_get_tso,
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 99a4d13..da00e16 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -349,6 +349,7 @@
 	if (nr_desc >= qlcnic_tx_avail(tx_ring)) {
 		netif_tx_stop_queue(tx_ring->txq);
 		__netif_tx_unlock_bh(tx_ring->txq);
+		adapter->stats.xmit_off++;
 		return -EBUSY;
 	}
 
@@ -397,20 +398,16 @@
 	return qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 }
 
-static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter,
-		u8 *addr, struct list_head *del_list)
+static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter, u8 *addr)
 {
 	struct list_head *head;
 	struct qlcnic_mac_list_s *cur;
 
 	/* look up if already exists */
-	list_for_each(head, del_list) {
+	list_for_each(head, &adapter->mac_list) {
 		cur = list_entry(head, struct qlcnic_mac_list_s, list);
-
-		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0) {
-			list_move_tail(head, &adapter->mac_list);
+		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0)
 			return 0;
-		}
 	}
 
 	cur = kzalloc(sizeof(struct qlcnic_mac_list_s), GFP_ATOMIC);
@@ -432,14 +429,9 @@
 	struct dev_mc_list *mc_ptr;
 	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 	u32 mode = VPORT_MISS_MODE_DROP;
-	LIST_HEAD(del_list);
-	struct list_head *head;
-	struct qlcnic_mac_list_s *cur;
 
-	list_splice_tail_init(&adapter->mac_list, &del_list);
-
-	qlcnic_nic_add_mac(adapter, adapter->mac_addr, &del_list);
-	qlcnic_nic_add_mac(adapter, bcast_addr, &del_list);
+	qlcnic_nic_add_mac(adapter, adapter->mac_addr);
+	qlcnic_nic_add_mac(adapter, bcast_addr);
 
 	if (netdev->flags & IFF_PROMISC) {
 		mode = VPORT_MISS_MODE_ACCEPT_ALL;
@@ -454,22 +446,12 @@
 
 	if (!netdev_mc_empty(netdev)) {
 		netdev_for_each_mc_addr(mc_ptr, netdev) {
-			qlcnic_nic_add_mac(adapter, mc_ptr->dmi_addr,
-							&del_list);
+			qlcnic_nic_add_mac(adapter, mc_ptr->dmi_addr);
 		}
 	}
 
 send_fw_cmd:
 	qlcnic_nic_set_promisc(adapter, mode);
-	head = &del_list;
-	while (!list_empty(head)) {
-		cur = list_entry(head->next, struct qlcnic_mac_list_s, list);
-
-		qlcnic_sre_macaddr_change(adapter,
-				cur->mac_addr, QLCNIC_MAC_DEL);
-		list_del(&cur->list);
-		kfree(cur);
-	}
 }
 
 int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32 mode)
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
index ea00ab4..7c34e4e 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -568,21 +568,123 @@
 	return NULL;
 }
 
+#define FILEHEADER_SIZE (14 * 4)
+
 static int
-qlcnic_set_product_offs(struct qlcnic_adapter *adapter)
+qlcnic_validate_header(struct qlcnic_adapter *adapter)
+{
+	const u8 *unirom = adapter->fw->data;
+	struct uni_table_desc *directory = (struct uni_table_desc *) &unirom[0];
+	__le32 fw_file_size = adapter->fw->size;
+	__le32 entries;
+	__le32 entry_size;
+	__le32 tab_size;
+
+	if (fw_file_size < FILEHEADER_SIZE)
+		return -EINVAL;
+
+	entries = cpu_to_le32(directory->num_entries);
+	entry_size = cpu_to_le32(directory->entry_size);
+	tab_size = cpu_to_le32(directory->findex) + (entries * entry_size);
+
+	if (fw_file_size < tab_size)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+qlcnic_validate_bootld(struct qlcnic_adapter *adapter)
+{
+	struct uni_table_desc *tab_desc;
+	struct uni_data_desc *descr;
+	const u8 *unirom = adapter->fw->data;
+	int idx = cpu_to_le32(*((int *)&unirom[adapter->file_prd_off] +
+				QLCNIC_UNI_BOOTLD_IDX_OFF));
+	__le32 offs;
+	__le32 tab_size;
+	__le32 data_size;
+
+	tab_desc = qlcnic_get_table_desc(unirom, QLCNIC_UNI_DIR_SECT_BOOTLD);
+
+	if (!tab_desc)
+		return -EINVAL;
+
+	tab_size = cpu_to_le32(tab_desc->findex) +
+			(cpu_to_le32(tab_desc->entry_size * (idx + 1)));
+
+	if (adapter->fw->size < tab_size)
+		return -EINVAL;
+
+	offs = cpu_to_le32(tab_desc->findex) +
+		(cpu_to_le32(tab_desc->entry_size) * (idx));
+	descr = (struct uni_data_desc *)&unirom[offs];
+
+	data_size = descr->findex + cpu_to_le32(descr->size);
+
+	if (adapter->fw->size < data_size)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+qlcnic_validate_fw(struct qlcnic_adapter *adapter)
+{
+	struct uni_table_desc *tab_desc;
+	struct uni_data_desc *descr;
+	const u8 *unirom = adapter->fw->data;
+	int idx = cpu_to_le32(*((int *)&unirom[adapter->file_prd_off] +
+				QLCNIC_UNI_FIRMWARE_IDX_OFF));
+	__le32 offs;
+	__le32 tab_size;
+	__le32 data_size;
+
+	tab_desc = qlcnic_get_table_desc(unirom, QLCNIC_UNI_DIR_SECT_FW);
+
+	if (!tab_desc)
+		return -EINVAL;
+
+	tab_size = cpu_to_le32(tab_desc->findex) +
+			(cpu_to_le32(tab_desc->entry_size * (idx + 1)));
+
+	if (adapter->fw->size < tab_size)
+		return -EINVAL;
+
+	offs = cpu_to_le32(tab_desc->findex) +
+		(cpu_to_le32(tab_desc->entry_size) * (idx));
+	descr = (struct uni_data_desc *)&unirom[offs];
+	data_size = descr->findex + cpu_to_le32(descr->size);
+
+	if (adapter->fw->size < data_size)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+qlcnic_validate_product_offs(struct qlcnic_adapter *adapter)
 {
 	struct uni_table_desc *ptab_descr;
 	const u8 *unirom = adapter->fw->data;
-	u32 i;
-	__le32 entries;
 	int mn_present = qlcnic_has_mn(adapter);
+	__le32 entries;
+	__le32 entry_size;
+	__le32 tab_size;
+	u32 i;
 
 	ptab_descr = qlcnic_get_table_desc(unirom,
 				QLCNIC_UNI_DIR_SECT_PRODUCT_TBL);
-	if (ptab_descr == NULL)
-		return -1;
+	if (!ptab_descr)
+		return -EINVAL;
 
 	entries = cpu_to_le32(ptab_descr->num_entries);
+	entry_size = cpu_to_le32(ptab_descr->entry_size);
+	tab_size = cpu_to_le32(ptab_descr->findex) + (entries * entry_size);
+
+	if (adapter->fw->size < tab_size)
+		return -EINVAL;
+
 nomn:
 	for (i = 0; i < entries; i++) {
 
@@ -609,7 +711,37 @@
 		mn_present = 0;
 		goto nomn;
 	}
-	return -1;
+	return -EINVAL;
+}
+
+static int
+qlcnic_validate_unified_romimage(struct qlcnic_adapter *adapter)
+{
+	if (qlcnic_validate_header(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: header validation failed\n");
+		return -EINVAL;
+	}
+
+	if (qlcnic_validate_product_offs(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: product validation failed\n");
+		return -EINVAL;
+	}
+
+	if (qlcnic_validate_bootld(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: bootld validation failed\n");
+		return -EINVAL;
+	}
+
+	if (qlcnic_validate_fw(adapter)) {
+		dev_err(&adapter->pdev->dev,
+				"unified image: firmware validation failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
 }
 
 static
@@ -715,7 +847,7 @@
 	bios_ver = cpu_to_le32(*((u32 *) (&fw->data[prd_off])
 				+ QLCNIC_UNI_BIOS_VERSION_OFF));
 
-	return (bios_ver << 24) + ((bios_ver >> 8) & 0xff00) + (bios_ver >> 24);
+	return (bios_ver << 16) + ((bios_ver >> 8) & 0xff00) + (bios_ver >> 24);
 }
 
 int
@@ -858,7 +990,7 @@
 	u8 fw_type = adapter->fw_type;
 
 	if (fw_type == QLCNIC_UNIFIED_ROMIMAGE) {
-		if (qlcnic_set_product_offs(adapter))
+		if (qlcnic_validate_unified_romimage(adapter))
 			return -EINVAL;
 
 		min_size = QLCNIC_UNI_FW_MIN_SIZE;
@@ -1114,8 +1246,10 @@
 	struct pci_dev *pdev = adapter->pdev;
 
 	buffer->skb = dev_alloc_skb(rds_ring->skb_size);
-	if (!buffer->skb)
+	if (!buffer->skb) {
+		adapter->stats.skb_alloc_failure++;
 		return -ENOMEM;
+	}
 
 	skb = buffer->skb;
 
@@ -1289,7 +1423,7 @@
 	netif_receive_skb(skb);
 
 	adapter->stats.lro_pkts++;
-	adapter->stats.rxbytes += length;
+	adapter->stats.lrobytes += length;
 
 	return buffer;
 }
@@ -1505,6 +1639,8 @@
 		adapter->diag_cnt++;
 
 	dev_kfree_skb_any(skb);
+	adapter->stats.rx_pkts++;
+	adapter->stats.rxbytes += length;
 
 	return buffer;
 }
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 665e8e5..fc72156 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -118,6 +118,7 @@
 	if (qlcnic_tx_avail(tx_ring) <= TX_STOP_THRESH) {
 		netif_stop_queue(adapter->netdev);
 		smp_mb();
+		adapter->stats.xmit_off++;
 	}
 }
 
@@ -1385,6 +1386,7 @@
 	int copied, offset, copy_len, hdr_len = 0, tso = 0, vlan_oob = 0;
 	struct cmd_desc_type0 *hwdesc;
 	struct vlan_ethhdr *vh;
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 
 	if (protocol == cpu_to_be16(ETH_P_8021Q)) {
 
@@ -1494,6 +1496,7 @@
 
 	tx_ring->producer = producer;
 	barrier();
+	adapter->stats.lso_frames++;
 }
 
 static int
@@ -1573,6 +1576,7 @@
 
 	if (unlikely(no_of_desc + 2 > qlcnic_tx_avail(tx_ring))) {
 		netif_stop_queue(netdev);
+		adapter->stats.xmit_off++;
 		return NETDEV_TX_BUSY;
 	}
 
@@ -1880,6 +1884,7 @@
 			if (qlcnic_tx_avail(tx_ring) > TX_STOP_THRESH) {
 				netif_wake_queue(netdev);
 				adapter->tx_timeo_cnt = 0;
+				adapter->stats.xmit_on++;
 			}
 			__netif_tx_unlock(tx_ring->txq);
 		}
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 05b8bde..7dbff87 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -405,7 +405,7 @@
 		u32 wol = 0;
 		status = ql_mb_wol_mode(qdev, wol);
 		netif_err(qdev, drv, qdev->ndev, "WOL %s (wol code 0x%x)\n",
-			  status == 0 ? "cleared sucessfully" : "clear failed",
+			  status == 0 ? "cleared successfully" : "clear failed",
 			  wol);
 	}
 
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index c26ec5d..fd34f26 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3855,7 +3855,7 @@
 		status = ql_mb_wol_mode(qdev, wol);
 		netif_err(qdev, drv, qdev->ndev,
 			  "WOL %s (wol code 0x%x) on %s\n",
-			  (status == 0) ? "Sucessfully set" : "Failed",
+			  (status == 0) ? "Successfully set" : "Failed",
 			  wol, qdev->ndev->name);
 	}
 
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index dfc3573..9d3ebf3e97 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -4270,7 +4270,7 @@
 
 	tp->cur_tx += frags + 1;
 
-	smp_wmb();
+	wmb();
 
 	RTL_W8(TxPoll, NPQ);	/* set polling bit */
 
@@ -4621,7 +4621,7 @@
 		 * until it does.
 		 */
 		tp->intr_mask = 0xffff;
-		smp_wmb();
+		wmb();
 		RTL_W16(IntrMask, tp->intr_event);
 	}
 
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 43bc66a..df70657 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -923,8 +923,8 @@
 	tmp_v_addr = mac_control->stats_mem;
 	mac_control->stats_info = (struct stat_block *)tmp_v_addr;
 	memset(tmp_v_addr, 0, size);
-	DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n", dev->name,
-		  (unsigned long long)tmp_p_addr);
+	DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n",
+		dev_name(&nic->pdev->dev), (unsigned long long)tmp_p_addr);
 	mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
 	return SUCCESS;
 }
@@ -3480,7 +3480,7 @@
 	struct swStat *swstats;
 
 	DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n",
-		  __func__, sp->dev->name);
+		  __func__, pci_name(sp->pdev));
 
 	/* Back up  the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
 	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
diff --git a/drivers/net/sfc/regs.h b/drivers/net/sfc/regs.h
index 89d606f..18a3be4 100644
--- a/drivers/net/sfc/regs.h
+++ b/drivers/net/sfc/regs.h
@@ -95,7 +95,7 @@
 #define	FRF_AA_INT_ACK_KER_FIELD_LBN 0
 #define	FRF_AA_INT_ACK_KER_FIELD_WIDTH 32
 
-/* INT_ISR0_REG: Function 0 Interrupt Acknowlege Status register */
+/* INT_ISR0_REG: Function 0 Interrupt Acknowledge Status register */
 #define	FR_BZ_INT_ISR0 0x00000090
 #define	FRF_BZ_INT_ISR_REG_LBN 0
 #define	FRF_BZ_INT_ISR_REG_WIDTH 64
diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index a85efcf..e8387d2 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c
@@ -557,7 +557,7 @@
 
 	/*
 	 * send never allocation request where the requested payload and
-	 * overhead is zero or deallocate bandwidht when no bandwidth is
+	 * overhead is zero or deallocate bandwidth when no bandwidth is
 	 * parsed
 	 */
 	if (!smc->mib.fddiESSPayload) {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 653bdd7..d8ec4c1 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -4863,6 +4863,7 @@
 	if (!hw)
 		return 0;
 
+	rtnl_lock();
 	err = pci_set_power_state(pdev, PCI_D0);
 	if (err)
 		goto out;
@@ -4884,7 +4885,6 @@
 	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
 	napi_enable(&hw->napi);
 
-	rtnl_lock();
 	for (i = 0; i < hw->ports; i++) {
 		err = sky2_reattach(hw->dev[i]);
 		if (err)
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 5479954..8d2772c 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -330,6 +330,48 @@
 
 #include <unit/smc91111.h>
 
+#elif defined(CONFIG_ARCH_MSM)
+
+#define SMC_CAN_USE_8BIT	0
+#define SMC_CAN_USE_16BIT	1
+#define SMC_CAN_USE_32BIT	0
+#define SMC_NOWAIT		1
+
+#define SMC_inw(a, r)		readw((a) + (r))
+#define SMC_outw(v, a, r)	writew(v, (a) + (r))
+#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
+#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
+
+#define SMC_IRQ_FLAGS		IRQF_TRIGGER_HIGH
+
+#elif defined(CONFIG_COLDFIRE)
+
+#define SMC_CAN_USE_8BIT	0
+#define SMC_CAN_USE_16BIT	1
+#define SMC_CAN_USE_32BIT	0
+#define SMC_NOWAIT		1
+
+static inline void mcf_insw(void *a, unsigned char *p, int l)
+{
+	u16 *wp = (u16 *) p;
+	while (l-- > 0)
+		*wp++ = readw(a);
+}
+
+static inline void mcf_outsw(void *a, unsigned char *p, int l)
+{
+	u16 *wp = (u16 *) p;
+	while (l-- > 0)
+		writew(*wp++, a);
+}
+
+#define SMC_inw(a, r)		_swapw(readw((a) + (r)))
+#define SMC_outw(v, a, r)	writew(_swapw(v), (a) + (r))
+#define SMC_insw(a, r, p, l)	mcf_insw(a + r, p, l)
+#define SMC_outsw(a, r, p, l)	mcf_outsw(a + r, p, l)
+
+#define SMC_IRQ_FLAGS		(IRQF_DISABLED)
+
 #else
 
 /*
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index 30110a1..34fa10d 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -1347,7 +1347,7 @@
 
 	netif_carrier_off(dev);
 
-	/* disable, mask and acknowlege all interrupts */
+	/* disable, mask and acknowledge all interrupts */
 	spin_lock_irqsave(&pd->int_lock, flags);
 	int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_);
 	smsc9420_reg_write(pd, INT_CFG, int_cfg);
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 2f8a8c3..5ba9d98 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -474,7 +474,7 @@
  * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
  * @card: card structure
  *
- * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the
+ * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the
  * chip by writing to the appropriate register. DMA is enabled in
  * spider_net_enable_rxdmac.
  */
@@ -1820,7 +1820,7 @@
 
 	spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
 
-	/* set chain tail adress for RX chains and
+	/* set chain tail address for RX chains and
 	 * enable DMA */
 	spider_net_enable_rxchtails(card);
 	spider_net_enable_rxdmac(card);
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 4344017..70196bc 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -782,7 +782,7 @@
 			break;
 
 		/* When writing back RX descriptor, GEM writes status
-		 * then buffer address, possibly in seperate transactions.
+		 * then buffer address, possibly in separate transactions.
 		 * If we don't wait for the chip to write both, we could
 		 * post a new buffer to this descriptor then have GEM spam
 		 * on the buffer address.  We sync on the RX completion
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 0c97802..f549309 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -1851,7 +1851,7 @@
  * @data - desc's data
  * @size - desc's size
  *
- * NOTE: this func does check for available space and, if neccessary, waits for
+ * NOTE: this func does check for available space and, if necessary, waits for
  *   NIC to read existing data before writing new one.
  */
 static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 0fa7688..22cf1c4 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -5279,7 +5279,7 @@
 	struct tg3 *tp = netdev_priv(dev);
 
 	for (i = 0; i < tp->irq_cnt; i++)
-		tg3_interrupt(tp->napi[i].irq_vec, dev);
+		tg3_interrupt(tp->napi[i].irq_vec, &tp->napi[i]);
 }
 #endif
 
@@ -9776,7 +9776,7 @@
 			   ADVERTISED_Pause |
 			   ADVERTISED_Asym_Pause;
 
-		if (!(tp->tg3_flags2 & TG3_FLAG_10_100_ONLY))
+		if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY))
 			mask |= ADVERTISED_1000baseT_Half |
 				ADVERTISED_1000baseT_Full;
 
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index 21a0175..ee71bcf 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -693,7 +693,7 @@
  * NOTE: This function should be used whenever the status of any TPL must be
  * modified by the driver, because the compiler may otherwise change the
  * order of instructions such that writing the TPL status may be executed at
- * an undesireable time. When this function is used, the status is always
+ * an undesirable time. When this function is used, the status is always
  * written when the function is called.
  */
 static void tms380tr_write_tpl_status(TPL *tpl, unsigned int Status)
@@ -2264,7 +2264,7 @@
  * This function should be used whenever the status of any RPL must be
  * modified by the driver, because the compiler may otherwise change the
  * order of instructions such that writing the RPL status may be executed
- * at an undesireable time. When this function is used, the status is
+ * at an undesirable time. When this function is used, the status is
  * always written when the function is called.
  */
 static void tms380tr_write_rpl_status(RPL *rpl, unsigned int Status)
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 93f4e83..49f05d1 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -143,6 +143,12 @@
 
 void __devinit tulip_parse_eeprom(struct net_device *dev)
 {
+	/*
+	  dev is not registered at this point, so logging messages can't
+	  use dev_<level> or netdev_<level> but dev->name is good via a
+	  hack in the caller
+	*/
+
 	/* The last media info list parsed, for multiport boards.  */
 	static struct mediatable *last_mediatable;
 	static unsigned char *last_ee_data;
@@ -161,15 +167,14 @@
 		if (ee_data[0] == 0xff) {
 			if (last_mediatable) {
 				controller_index++;
-				dev_info(&dev->dev,
-					 "Controller %d of multiport board\n",
-					 controller_index);
+				pr_info("%s: Controller %d of multiport board\n",
+					dev->name, controller_index);
 				tp->mtable = last_mediatable;
 				ee_data = last_ee_data;
 				goto subsequent_board;
 			} else
-				dev_info(&dev->dev,
-					 "Missing EEPROM, this interface may not work correctly!\n");
+				pr_info("%s: Missing EEPROM, this interface may not work correctly!\n",
+					dev->name);
 			return;
 		}
 	  /* Do a fix-up based on the vendor half of the station address prefix. */
@@ -181,15 +186,14 @@
 			  i++;			/* An Accton EN1207, not an outlaw Maxtech. */
 		  memcpy(ee_data + 26, eeprom_fixups[i].newtable,
 				 sizeof(eeprom_fixups[i].newtable));
-		  dev_info(&dev->dev,
-			   "Old format EEPROM on '%s' board.  Using substitute media control info\n",
-			   eeprom_fixups[i].name);
+		  pr_info("%s: Old format EEPROM on '%s' board.  Using substitute media control info\n",
+			  dev->name, eeprom_fixups[i].name);
 		  break;
 		}
 	  }
 	  if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
-		  dev_info(&dev->dev,
-			   "Old style EEPROM with no media selection information\n");
+		  pr_info("%s: Old style EEPROM with no media selection information\n",
+			  dev->name);
 		return;
 	  }
 	}
@@ -217,8 +221,8 @@
 	        /* there is no phy information, don't even try to build mtable */
 	        if (count == 0) {
 			if (tulip_debug > 0)
-				dev_warn(&dev->dev,
-					 "no phy info, aborting mtable build\n");
+				pr_warning("%s: no phy info, aborting mtable build\n",
+					   dev->name);
 		        return;
 		}
 
@@ -234,8 +238,10 @@
 		mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
 		mtable->csr15dir = mtable->csr15val = 0;
 
-		dev_info(&dev->dev, "EEPROM default media type %s\n",
-			 media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
+		pr_info("%s: EEPROM default media type %s\n",
+			dev->name,
+			media & 0x0800 ? "Autosense"
+				       : medianame[media & MEDIA_MASK]);
 		for (i = 0; i < count; i++) {
 			struct medialeaf *leaf = &mtable->mleaf[i];
 
@@ -298,17 +304,17 @@
 			}
 			if (tulip_debug > 1  &&  leaf->media == 11) {
 				unsigned char *bp = leaf->leafdata;
-				dev_info(&dev->dev,
-					 "MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
-					 bp[0], bp[1], bp[2 + bp[1]*2],
-					 bp[5 + bp[2 + bp[1]*2]*2],
-					 bp[4 + bp[2 + bp[1]*2]*2]);
+				pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
+					dev->name,
+					bp[0], bp[1], bp[2 + bp[1]*2],
+					bp[5 + bp[2 + bp[1]*2]*2],
+					bp[4 + bp[2 + bp[1]*2]*2]);
 			}
-			dev_info(&dev->dev,
-				 "Index #%d - Media %s (#%d) described by a %s (%d) block\n",
-				 i, medianame[leaf->media & 15], leaf->media,
-				 leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
-				 leaf->type);
+			pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n",
+				dev->name,
+				i, medianame[leaf->media & 15], leaf->media,
+				leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
+				leaf->type);
 		}
 		if (new_advertise)
 			tp->sym_advertise = new_advertise;
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index ce1efa4..96c39bd 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1437,7 +1437,7 @@
 
 		__tun_detach(tun);
 
-		/* If desireable, unregister the netdevice. */
+		/* If desirable, unregister the netdevice. */
 		if (!(tun->flags & TUN_PERSIST)) {
 			rtnl_lock();
 			if (dev->reg_state == NETREG_REGISTERED)
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index e3ddcb8..cd24e5f 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -480,7 +480,7 @@
 		typhoon_inc_cmd_index(&ring->lastWrite, 1);
 
 		INIT_COMMAND_NO_RESPONSE(cmd, TYPHOON_CMD_HELLO_RESP);
-		smp_wmb();
+		wmb();
 		iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY);
 		spin_unlock(&tp->command_lock);
 	}
@@ -1311,13 +1311,15 @@
 
 	tp->txlo_dma_addr = le32_to_cpu(iface->txLoAddr);
 	tp->card_state = Sleeping;
-	smp_wmb();
 
 	tp->offload = TYPHOON_OFFLOAD_IP_CHKSUM | TYPHOON_OFFLOAD_TCP_CHKSUM;
 	tp->offload |= TYPHOON_OFFLOAD_UDP_CHKSUM | TSO_OFFLOAD_ON;
 
 	spin_lock_init(&tp->command_lock);
 	spin_lock_init(&tp->state_lock);
+
+	/* Force the writes to the shared memory area out before continuing. */
+	wmb();
 }
 
 static void
@@ -2096,7 +2098,7 @@
 
 	if(typhoon_reset(tp->ioaddr, WaitNoSleep) < 0) {
 		netdev_warn(dev, "could not reset in tx timeout\n");
-		goto truely_dead;
+		goto truly_dead;
 	}
 
 	/* If we ever start using the Hi ring, it will need cleaning too */
@@ -2105,13 +2107,13 @@
 
 	if(typhoon_start_runtime(tp) < 0) {
 		netdev_err(dev, "could not start runtime in tx timeout\n");
-		goto truely_dead;
+		goto truly_dead;
         }
 
 	netif_wake_queue(dev);
 	return;
 
-truely_dead:
+truly_dead:
 	/* Reset the hardware, and turn off carrier to avoid more timeouts */
 	typhoon_reset(tp->ioaddr, NoWait);
 	netif_carrier_off(dev);
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 23a9751..1b0aef3 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -430,7 +430,7 @@
 	    ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num);
 
 	/* Ethernet frames are defined in Little Endian mode,
-	therefor to insert */
+	therefore to insert */
 	/* the address to the hash (Big Endian mode), we reverse the bytes.*/
 
 	set_mac_addr(&p_82xx_addr_filt->taddr.h, p_enet_addr);
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 20e3460..9e05639 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -54,6 +54,7 @@
 #define AX_CMD_WRITE_IPG0		0x12
 #define AX_CMD_WRITE_IPG1		0x13
 #define AX_CMD_READ_NODE_ID		0x13
+#define AX_CMD_WRITE_NODE_ID		0x14
 #define AX_CMD_WRITE_IPG2		0x14
 #define AX_CMD_WRITE_MULTI_FILTER	0x16
 #define AX88172_CMD_READ_NODE_ID	0x17
@@ -165,6 +166,7 @@
 /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
 struct asix_data {
 	u8 multi_filter[AX_MCAST_FILTER_SIZE];
+	u8 mac_addr[ETH_ALEN];
 	u8 phymode;
 	u8 ledmode;
 	u8 eeprom_len;
@@ -732,6 +734,30 @@
 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
 }
 
+static int asix_set_mac_address(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct sockaddr *addr = p;
+
+	if (netif_running(net))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
+
+	/* We use the 20 byte dev->data
+	 * for our 6 byte mac buffer
+	 * to avoid allocating memory that
+	 * is tricky to free later */
+	memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
+	asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+
+	return 0;
+}
+
 /* We need to override some ethtool_ops so we require our
    own structure so we don't interfere with other usbnet
    devices that may be connected at the same time. */
@@ -919,7 +945,7 @@
 	.ndo_start_xmit		= usbnet_start_xmit,
 	.ndo_tx_timeout		= usbnet_tx_timeout,
 	.ndo_change_mtu		= usbnet_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address 	= asix_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= asix_ioctl,
 	.ndo_set_multicast_list = asix_set_multicast,
@@ -1213,7 +1239,7 @@
 	.ndo_stop		= usbnet_stop,
 	.ndo_start_xmit		= usbnet_start_xmit,
 	.ndo_tx_timeout		= usbnet_tx_timeout,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address 	= asix_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_multicast_list = asix_set_multicast,
 	.ndo_do_ioctl 		= asix_ioctl,
diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h
index 5d02f02..b90d876 100644
--- a/drivers/net/usb/pegasus.h
+++ b/drivers/net/usb/pegasus.h
@@ -177,7 +177,7 @@
 PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
-		DEFAULT_GPIO_RESET | PEGASUS_II ) 	
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
@@ -208,6 +208,8 @@
  */
 PEGASUS_DEV_CLASS( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Belkin F5U122 10/100 USB Ethernet", VENDOR_BELKIN, 0x0122,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
@@ -249,7 +251,7 @@
 PEGASUS_DEV( "Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
-		DEFAULT_GPIO_RESET | PEGASUS_II )	
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index b36bf96..f0bd70f 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -811,7 +811,7 @@
 	cosa_enable_rx(chan);
 	spin_lock_irqsave(&cosa->lock, flags);
 	add_wait_queue(&chan->rxwaitq, &wait);
-	while(!chan->rx_status) {
+	while (!chan->rx_status) {
 		current->state = TASK_INTERRUPTIBLE;
 		spin_unlock_irqrestore(&cosa->lock, flags);
 		schedule();
@@ -896,7 +896,7 @@
 
 	spin_lock_irqsave(&cosa->lock, flags);
 	add_wait_queue(&chan->txwaitq, &wait);
-	while(!chan->tx_status) {
+	while (!chan->tx_status) {
 		current->state = TASK_INTERRUPTIBLE;
 		spin_unlock_irqrestore(&cosa->lock, flags);
 		schedule();
@@ -1153,7 +1153,7 @@
 	struct channel_data *channel, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
-	switch(cmd) {
+	switch (cmd) {
 	case COSAIORSET:	/* Reset the device */
 		if (!capable(CAP_NET_ADMIN))
 			return -EACCES;
@@ -1704,7 +1704,7 @@
 			spin_unlock_irqrestore(&cosa->lock, flags);
 			return;
 		}
-		while(1) {
+		while (1) {
 			cosa->txchan++;
 			i++;
 			if (cosa->txchan >= cosa->nchannels)
@@ -2010,7 +2010,7 @@
 static void debug_status_in(struct cosa_data *cosa, int status)
 {
 	char *s;
-	switch(status & SR_CMD_FROM_SRP_MASK) {
+	switch (status & SR_CMD_FROM_SRP_MASK) {
 	case SR_UP_REQUEST:
 		s = "RX_REQ";
 		break;
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index f1bff98..1ceccf1 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -141,7 +141,7 @@
 	    data->address != CISCO_UNICAST)
 		return cpu_to_be16(ETH_P_HDLC);
 
-	switch(data->protocol) {
+	switch (data->protocol) {
 	case cpu_to_be16(ETH_P_IP):
 	case cpu_to_be16(ETH_P_IPX):
 	case cpu_to_be16(ETH_P_IPV6):
@@ -190,7 +190,7 @@
 		cisco_data = (struct cisco_packet*)(skb->data + sizeof
 						    (struct hdlc_header));
 
-		switch(ntohl (cisco_data->type)) {
+		switch (ntohl (cisco_data->type)) {
 		case CISCO_ADDR_REQ: /* Stolen from syncppp.c :-) */
 			in_dev = dev->ip_ptr;
 			addr = 0;
@@ -245,8 +245,8 @@
 
 			dev_kfree_skb_any(skb);
 			return NET_RX_SUCCESS;
-		} /* switch(keepalive type) */
-	} /* switch(protocol) */
+		} /* switch (keepalive type) */
+	} /* switch (protocol) */
 
 	printk(KERN_INFO "%s: Unsupported protocol %x\n", dev->name,
 	       ntohs(data->protocol));
diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c
index aa9248f..6e1ca25 100644
--- a/drivers/net/wan/hdlc_x25.c
+++ b/drivers/net/wan/hdlc_x25.c
@@ -202,10 +202,10 @@
 		return 0; /* return protocol only, no settable parameters */
 
 	case IF_PROTO_X25:
-		if(!capable(CAP_NET_ADMIN))
+		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
-		if(dev->flags & IFF_UP)
+		if (dev->flags & IFF_UP)
 			return -EBUSY;
 
 		result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index e803a7d..25c24f0 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -612,7 +612,7 @@
 		goto error_wait_for_ack;
 	}
 	rx_bytes = result;
-	/* verify the ack and read more if neccessary [result is the
+	/* verify the ack and read more if necessary [result is the
 	 * final amount of bytes we get in the ack]  */
 	result = __i2400m_bm_ack_verify(i2400m, opcode, ack, ack_size, flags);
 	if (result < 0)
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 04df9bb..820b128 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -627,7 +627,7 @@
  * @I2400M_BRI_NO_REBOOT: Do not reboot the device and proceed
  *     directly to wait for a reboot barker from the device.
  * @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot
- *     rom after reading the MAC adress. This is quite a dirty hack,
+ *     rom after reading the MAC address. This is quite a dirty hack,
  *     if you ask me -- the device requires the bootrom to be
  *     intialized after reading the MAC address.
  */
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index 76a50ac..14f876b 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -304,7 +304,7 @@
  *
  * The device will be fully reset internally, but won't be
  * disconnected from the bus (so no reenumeration will
- * happen). Firmware upload will be neccessary.
+ * happen). Firmware upload will be necessary.
  *
  * The device will send a reboot barker that will trigger the driver
  * to reinitialize the state via __i2400m_dev_reset_handle.
@@ -314,7 +314,7 @@
  *
  * The device will be fully reset internally, disconnected from the
  * bus an a reenumeration will happen. Firmware upload will be
- * neccessary. Thus, we don't do any locking or struct
+ * necessary. Thus, we don't do any locking or struct
  * reinitialization, as we are going to be fully disconnected and
  * reenumerated.
  *
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 98f4f8c5..99f04c4 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -246,7 +246,7 @@
  *
  * The device will be fully reset internally, but won't be
  * disconnected from the USB bus (so no reenumeration will
- * happen). Firmware upload will be neccessary.
+ * happen). Firmware upload will be necessary.
  *
  * The device will send a reboot barker in the notification endpoint
  * that will trigger the driver to reinitialize the state
@@ -257,7 +257,7 @@
  *
  * The device will be fully reset internally, disconnected from the
  * USB bus an a reenumeration will happen. Firmware upload will be
- * neccessary. Thus, we don't do any locking or struct
+ * necessary. Thus, we don't do any locking or struct
  * reinitialization, as we are going to be fully disconnected and
  * reenumerated.
  *
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 698d567..dc5018a 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -5255,7 +5255,8 @@
 	WepKeyRid wkr;
 	int rc;
 
-	WARN_ON(keylen == 0);
+	if (WARN_ON(keylen == 0))
+		return -1;
 
 	memset(&wkr, 0, sizeof(wkr));
 	wkr.len = cpu_to_le16(sizeof(wkr));
diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index 8c8ce67..dc662b7 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -166,6 +166,7 @@
 	struct ath_common common;
 	struct mutex mutex;
 	enum ar9170_device_state state;
+	bool registered;
 	unsigned long bad_hw_nagger;
 
 	int (*open)(struct ar9170 *);
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index a6452af..257c734 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -2512,7 +2512,7 @@
 	/*
 	 * this buffer is used for rx stream reconstruction.
 	 * Under heavy load this device (or the transport layer?)
-	 * tends to split the streams into seperate rx descriptors.
+	 * tends to split the streams into separate rx descriptors.
 	 */
 
 	skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE, GFP_KERNEL);
@@ -2701,7 +2701,8 @@
 	dev_info(pdev, "Atheros AR9170 is registered as '%s'\n",
 		 wiphy_name(ar->hw->wiphy));
 
-	return err;
+	ar->registered = true;
+	return 0;
 
 err_unreg:
 	ieee80211_unregister_hw(ar->hw);
@@ -2712,11 +2713,14 @@
 
 void ar9170_unregister(struct ar9170 *ar)
 {
+	if (ar->registered) {
 #ifdef CONFIG_AR9170_LEDS
-	ar9170_unregister_leds(ar);
+		ar9170_unregister_leds(ar);
 #endif /* CONFIG_AR9170_LEDS */
 
-	kfree_skb(ar->rx_failover);
 	ieee80211_unregister_hw(ar->hw);
+	}
+
+	kfree_skb(ar->rx_failover);
 	mutex_destroy(&ar->mutex);
 }
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index 0f36118..4e30197 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -582,43 +582,6 @@
 	return 0;
 }
 
-static int ar9170_usb_request_firmware(struct ar9170_usb *aru)
-{
-	int err = 0;
-
-	err = request_firmware(&aru->firmware, "ar9170.fw",
-			       &aru->udev->dev);
-	if (!err) {
-		aru->init_values = NULL;
-		return 0;
-	}
-
-	if (aru->req_one_stage_fw) {
-		dev_err(&aru->udev->dev, "ar9170.fw firmware file "
-			"not found and is required for this device\n");
-		return -EINVAL;
-	}
-
-	dev_err(&aru->udev->dev, "ar9170.fw firmware file "
-		"not found, trying old firmware...\n");
-
-	err = request_firmware(&aru->init_values, "ar9170-1.fw",
-			       &aru->udev->dev);
-	if (err) {
-		dev_err(&aru->udev->dev, "file with init values not found.\n");
-		return err;
-	}
-
-	err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev);
-	if (err) {
-		release_firmware(aru->init_values);
-		dev_err(&aru->udev->dev, "firmware file not found.\n");
-		return err;
-	}
-
-	return err;
-}
-
 static int ar9170_usb_reset(struct ar9170_usb *aru)
 {
 	int ret, lock = (aru->intf->condition != USB_INTERFACE_BINDING);
@@ -757,6 +720,103 @@
 	return err;
 }
 
+static void ar9170_usb_firmware_failed(struct ar9170_usb *aru)
+{
+	struct device *parent = aru->udev->dev.parent;
+
+	/* unbind anything failed */
+	if (parent)
+		down(&parent->sem);
+	device_release_driver(&aru->udev->dev);
+	if (parent)
+		up(&parent->sem);
+}
+
+static void ar9170_usb_firmware_finish(const struct firmware *fw, void *context)
+{
+	struct ar9170_usb *aru = context;
+	int err;
+
+	aru->firmware = fw;
+
+	if (!fw) {
+		dev_err(&aru->udev->dev, "firmware file not found.\n");
+		goto err_freefw;
+	}
+
+	err = ar9170_usb_init_device(aru);
+	if (err)
+		goto err_freefw;
+
+	err = ar9170_usb_open(&aru->common);
+	if (err)
+		goto err_unrx;
+
+	err = ar9170_register(&aru->common, &aru->udev->dev);
+
+	ar9170_usb_stop(&aru->common);
+	if (err)
+		goto err_unrx;
+
+	return;
+
+ err_unrx:
+	ar9170_usb_cancel_urbs(aru);
+
+ err_freefw:
+	ar9170_usb_firmware_failed(aru);
+}
+
+static void ar9170_usb_firmware_inits(const struct firmware *fw,
+				      void *context)
+{
+	struct ar9170_usb *aru = context;
+	int err;
+
+	if (!fw) {
+		dev_err(&aru->udev->dev, "file with init values not found.\n");
+		ar9170_usb_firmware_failed(aru);
+		return;
+	}
+
+	aru->init_values = fw;
+
+	/* ok so we have the init values -- get code for two-stage */
+
+	err = request_firmware_nowait(THIS_MODULE, 1, "ar9170-2.fw",
+				      &aru->udev->dev, GFP_KERNEL, aru,
+				      ar9170_usb_firmware_finish);
+	if (err)
+		ar9170_usb_firmware_failed(aru);
+}
+
+static void ar9170_usb_firmware_step2(const struct firmware *fw, void *context)
+{
+	struct ar9170_usb *aru = context;
+	int err;
+
+	if (fw) {
+		ar9170_usb_firmware_finish(fw, context);
+		return;
+	}
+
+	if (aru->req_one_stage_fw) {
+		dev_err(&aru->udev->dev, "ar9170.fw firmware file "
+			"not found and is required for this device\n");
+		ar9170_usb_firmware_failed(aru);
+		return;
+	}
+
+	dev_err(&aru->udev->dev, "ar9170.fw firmware file "
+		"not found, trying old firmware...\n");
+
+	err = request_firmware_nowait(THIS_MODULE, 1, "ar9170-1.fw",
+				      &aru->udev->dev, GFP_KERNEL, aru,
+				      ar9170_usb_firmware_inits);
+	if (err)
+		ar9170_usb_firmware_failed(aru);
+}
+
 static bool ar9170_requires_one_stage(const struct usb_device_id *id)
 {
 	if (!id->driver_info)
@@ -814,33 +874,9 @@
 	if (err)
 		goto err_freehw;
 
-	err = ar9170_usb_request_firmware(aru);
-	if (err)
-		goto err_freehw;
-
-	err = ar9170_usb_init_device(aru);
-	if (err)
-		goto err_freefw;
-
-	err = ar9170_usb_open(ar);
-	if (err)
-		goto err_unrx;
-
-	err = ar9170_register(ar, &udev->dev);
-
-	ar9170_usb_stop(ar);
-	if (err)
-		goto err_unrx;
-
-	return 0;
-
-err_unrx:
-	ar9170_usb_cancel_urbs(aru);
-
-err_freefw:
-	release_firmware(aru->init_values);
-	release_firmware(aru->firmware);
-
+	return request_firmware_nowait(THIS_MODULE, 1, "ar9170.fw",
+				       &aru->udev->dev, GFP_KERNEL, aru,
+				       ar9170_usb_firmware_step2);
 err_freehw:
 	usb_set_intfdata(intf, NULL);
 	usb_put_dev(udev);
@@ -860,12 +896,12 @@
 	ar9170_unregister(&aru->common);
 	ar9170_usb_cancel_urbs(aru);
 
-	release_firmware(aru->init_values);
-	release_firmware(aru->firmware);
-
 	usb_put_dev(aru->udev);
 	usb_set_intfdata(intf, NULL);
 	ieee80211_free_hw(aru->common.hw);
+
+	release_firmware(aru->init_values);
+	release_firmware(aru->firmware);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 6a3f4da..10b5226 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -429,8 +429,8 @@
 			ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
 
 		AR5K_EEPROM_READ(o++, val);
-		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
-		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+		ee->ee_i_cal[mode] = (val >> 5) & 0x3f;
+		ee->ee_q_cal[mode] = val & 0x1f;
 
 		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
 			AR5K_EEPROM_READ(o++, val);
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 72474c0..eff3323 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1386,38 +1386,39 @@
 		goto done;
 
 	/* Calibration has finished, get the results and re-run */
+
+	/* work around empty results which can apparently happen on 5212 */
 	for (i = 0; i <= 10; i++) {
 		iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
 		i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
 		q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q);
+		ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"iq_corr:%x i_pwr:%x q_pwr:%x", iq_corr, i_pwr, q_pwr);
+		if (i_pwr && q_pwr)
+			break;
 	}
 
 	i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7;
 	q_coffd = q_pwr >> 7;
 
-	/* No correction */
-	if (i_coffd == 0 || q_coffd == 0)
+	/* protect against divide by 0 and loss of sign bits */
+	if (i_coffd == 0 || q_coffd < 2)
 		goto done;
 
-	i_coff = ((-iq_corr) / i_coffd);
+	i_coff = (-iq_corr) / i_coffd;
+	i_coff = clamp(i_coff, -32, 31); /* signed 6 bit */
 
-	/* Boundary check */
-	if (i_coff > 31)
-		i_coff = 31;
-	if (i_coff < -32)
-		i_coff = -32;
+	q_coff = (i_pwr / q_coffd) - 128;
+	q_coff = clamp(q_coff, -16, 15); /* signed 5 bit */
 
-	q_coff = (((s32)i_pwr / q_coffd) - 128);
+	ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"new I:%d Q:%d (i_coffd:%x q_coffd:%x)",
+			i_coff, q_coff, i_coffd, q_coffd);
 
-	/* Boundary check */
-	if (q_coff > 15)
-		q_coff = 15;
-	if (q_coff < -16)
-		q_coff = -16;
-
-	/* Commit new I/Q value */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE |
-		((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S));
+	/* Commit new I/Q values (set enable bit last to match HAL sources) */
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF, i_coff);
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF, q_coff);
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE);
 
 	/* Re-enable calibration -if we don't we'll commit
 	 * the same values again and again */
@@ -1873,7 +1874,7 @@
 		break;
 	case AR5K_ANTMODE_FIXED_A:
 		def_ant = 1;
-		tx_ant = 0;
+		tx_ant = 1;
 		use_def_for_tx = true;
 		update_def_on_tx = false;
 		use_def_for_rts = true;
@@ -1882,7 +1883,7 @@
 		break;
 	case AR5K_ANTMODE_FIXED_B:
 		def_ant = 2;
-		tx_ant = 0;
+		tx_ant = 2;
 		use_def_for_tx = true;
 		update_def_on_tx = false;
 		use_def_for_rts = true;
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 4cb9c5d..1464f89 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -2187,6 +2187,7 @@
  */
 #define	AR5K_PHY_IQ			0x9920			/* Register Address */
 #define	AR5K_PHY_IQ_CORR_Q_Q_COFF	0x0000001f	/* Mask for q correction info */
+#define	AR5K_PHY_IQ_CORR_Q_Q_COFF_S	0
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF	0x000007e0	/* Mask for i correction info */
 #define	AR5K_PHY_IQ_CORR_Q_I_COFF_S	5
 #define	AR5K_PHY_IQ_CORR_ENABLE		0x00000800	/* Enable i/q correction */
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index a35a7db..cbf28e3 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -851,12 +851,15 @@
 				AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
 				AR5K_INIT_CYCRSSI_THR1);
 
-	/* I/Q correction
-	 * TODO: Per channel i/q infos ? */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-		AR5K_PHY_IQ_CORR_ENABLE |
-		(ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
-		ee->ee_q_cal[ee_mode]);
+	/* I/Q correction (set enable bit last to match HAL sources) */
+	/* TODO: Per channel i/q infos ? */
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF,
+			    ee->ee_i_cal[ee_mode]);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF,
+			    ee->ee_q_cal[ee_mode]);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE);
+	}
 
 	/* Heavy clipping -disable for now */
 	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1)
@@ -1379,11 +1382,10 @@
 		ath5k_hw_set_sleep_clock(ah, true);
 
 	/*
-	 * Disable beacons and reset the register
+	 * Disable beacons and reset the TSF
 	 */
-	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
-			AR5K_BEACON_RESET_TSF);
-
+	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
+	ath5k_hw_reset_tsf(ah);
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index ac34a05..0e79e58 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -1323,7 +1323,7 @@
 
 static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
 			    struct ieee80211_sta *sta, void *priv_sta,
-			    u32 changed)
+			    u32 changed, enum nl80211_channel_type oper_chan_type)
 {
 	struct ath_softc *sc = priv;
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
@@ -1340,8 +1340,8 @@
 		if (sc->sc_ah->opmode != NL80211_IFTYPE_STATION)
 			return;
 
-		if (sc->hw->conf.channel_type == NL80211_CHAN_HT40MINUS ||
-		    sc->hw->conf.channel_type == NL80211_CHAN_HT40PLUS)
+		if (oper_chan_type == NL80211_CHAN_HT40MINUS ||
+		    oper_chan_type == NL80211_CHAN_HT40PLUS)
 			oper_cw40 = true;
 
 		oper_sgi40 = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 47294f9..b2c8207 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2258,7 +2258,7 @@
 		if (ATH_TXQ_SETUP(sc, i)) {
 			txq = &sc->tx.txq[i];
 
-			spin_lock(&txq->axq_lock);
+			spin_lock_bh(&txq->axq_lock);
 
 			list_for_each_entry_safe(ac,
 					ac_tmp, &txq->axq_acq, list) {
@@ -2279,7 +2279,7 @@
 				}
 			}
 
-			spin_unlock(&txq->axq_lock);
+			spin_unlock_bh(&txq->axq_lock);
 		}
 	}
 }
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 63c2a7a..5c7aa1b 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -3177,14 +3177,27 @@
 	int total_nr = 0;
 	int i;
 	struct pci_pool *pool;
-	u32 *virts[CB_NUMBER_OF_ELEMENTS_SMALL];
-	dma_addr_t phys[CB_NUMBER_OF_ELEMENTS_SMALL];
+	void **virts;
+	dma_addr_t *phys;
 
 	IPW_DEBUG_TRACE("<< : \n");
 
+	virts = kmalloc(sizeof(void *) * CB_NUMBER_OF_ELEMENTS_SMALL,
+			GFP_KERNEL);
+	if (!virts)
+		return -ENOMEM;
+
+	phys = kmalloc(sizeof(dma_addr_t) * CB_NUMBER_OF_ELEMENTS_SMALL,
+			GFP_KERNEL);
+	if (!phys) {
+		kfree(virts);
+		return -ENOMEM;
+	}
 	pool = pci_pool_create("ipw2200", priv->pci_dev, CB_MAX_LENGTH, 0, 0);
 	if (!pool) {
 		IPW_ERROR("pci_pool_create failed\n");
+		kfree(phys);
+		kfree(virts);
 		return -ENOMEM;
 	}
 
@@ -3254,6 +3267,8 @@
 		pci_pool_free(pool, virts[i], phys[i]);
 
 	pci_pool_destroy(pool);
+	kfree(phys);
+	kfree(virts);
 
 	return ret;
 }
diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h
index bf45391..a6d5e42 100644
--- a/drivers/net/wireless/ipw2x00/libipw.h
+++ b/drivers/net/wireless/ipw2x00/libipw.h
@@ -797,7 +797,7 @@
 	/* Probe / Beacon management */
 	struct list_head network_free_list;
 	struct list_head network_list;
-	struct libipw_network *networks;
+	struct libipw_network *networks[MAX_NETWORK_COUNT];
 	int scans;
 	int scan_age;
 
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index 1ae0b2b..2fa5586 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -67,16 +67,17 @@
 
 static int libipw_networks_allocate(struct libipw_device *ieee)
 {
-	if (ieee->networks)
-		return 0;
+	int i, j;
 
-	ieee->networks =
-	    kzalloc(MAX_NETWORK_COUNT * sizeof(struct libipw_network),
-		    GFP_KERNEL);
-	if (!ieee->networks) {
-		printk(KERN_WARNING "%s: Out of memory allocating beacons\n",
-		       ieee->dev->name);
-		return -ENOMEM;
+	for (i = 0; i < MAX_NETWORK_COUNT; i++) {
+		ieee->networks[i] = kzalloc(sizeof(struct libipw_network),
+					    GFP_KERNEL);
+		if (!ieee->networks[i]) {
+			LIBIPW_ERROR("Out of memory allocating beacons\n");
+			for (j = 0; j < i; j++)
+				kfree(ieee->networks[j]);
+			return -ENOMEM;
+		}
 	}
 
 	return 0;
@@ -97,15 +98,11 @@
 {
 	int i;
 
-	if (!ieee->networks)
-		return;
-
-	for (i = 0; i < MAX_NETWORK_COUNT; i++)
-		if (ieee->networks[i].ibss_dfs)
-			kfree(ieee->networks[i].ibss_dfs);
-
-	kfree(ieee->networks);
-	ieee->networks = NULL;
+	for (i = 0; i < MAX_NETWORK_COUNT; i++) {
+		if (ieee->networks[i]->ibss_dfs)
+			kfree(ieee->networks[i]->ibss_dfs);
+		kfree(ieee->networks[i]);
+	}
 }
 
 void libipw_networks_age(struct libipw_device *ieee,
@@ -130,7 +127,7 @@
 	INIT_LIST_HEAD(&ieee->network_free_list);
 	INIT_LIST_HEAD(&ieee->network_list);
 	for (i = 0; i < MAX_NETWORK_COUNT; i++)
-		list_add_tail(&ieee->networks[i].list,
+		list_add_tail(&ieee->networks[i]->list,
 			      &ieee->network_free_list);
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 303cc81..e0678d9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -184,7 +184,7 @@
 {
 	int idx;
 
-	for (idx = 0; idx < IWL_RATE_COUNT; idx++)
+	for (idx = 0; idx < IWL_RATE_COUNT_3945; idx++)
 		if (iwl3945_rates[idx].plcp == plcp)
 			return idx;
 	return -1;
@@ -805,7 +805,7 @@
 				  int sta_id, int tx_id)
 {
 	u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
-	u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT - 1);
+	u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT_3945);
 	u16 rate_mask;
 	int rate;
 	u8 rts_retry_limit;
@@ -2146,7 +2146,7 @@
 
 		/* fill in channel group's nominal powers for each rate */
 		for (rate_index = 0;
-		     rate_index < IWL_RATE_COUNT; rate_index++, clip_pwrs++) {
+		     rate_index < IWL_RATE_COUNT_3945; rate_index++, clip_pwrs++) {
 			switch (rate_index) {
 			case IWL_RATE_36M_INDEX_TABLE:
 				if (i == 0)	/* B/G */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 6aeb82b..818367b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1463,59 +1463,66 @@
 }
 
 
-/**
- * iwl_read_ucode - Read uCode images from disk file.
- *
- * Copy into buffers for card to fetch via bus-mastering
- */
-static int iwl_read_ucode(struct iwl_priv *priv)
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
+static int iwl_mac_setup_register(struct iwl_priv *priv);
+
+static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
 {
-	struct iwl_ucode_header *ucode;
-	int ret = -EINVAL, index;
-	const struct firmware *ucode_raw;
 	const char *name_pre = priv->cfg->fw_name_pre;
+
+	if (first)
+		priv->fw_index = priv->cfg->ucode_api_max;
+	else
+		priv->fw_index--;
+
+	if (priv->fw_index < priv->cfg->ucode_api_min) {
+		IWL_ERR(priv, "no suitable firmware found!\n");
+		return -ENOENT;
+	}
+
+	sprintf(priv->firmware_name, "%s%d%s",
+		name_pre, priv->fw_index, ".ucode");
+
+	IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
+		       priv->firmware_name);
+
+	return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
+				       &priv->pci_dev->dev, GFP_KERNEL, priv,
+				       iwl_ucode_callback);
+}
+
+/**
+ * iwl_ucode_callback - callback when firmware was loaded
+ *
+ * If loaded successfully, copies the firmware into buffers
+ * for the card to fetch (via DMA).
+ */
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
+{
+	struct iwl_priv *priv = context;
+	struct iwl_ucode_header *ucode;
 	const unsigned int api_max = priv->cfg->ucode_api_max;
 	const unsigned int api_min = priv->cfg->ucode_api_min;
-	char buf[25];
 	u8 *src;
 	size_t len;
 	u32 api_ver, build;
 	u32 inst_size, data_size, init_size, init_data_size, boot_size;
+	int err;
 	u16 eeprom_ver;
 
-	/* Ask kernel firmware_class module to get the boot firmware off disk.
-	 * request_firmware() is synchronous, file is in memory on return. */
-	for (index = api_max; index >= api_min; index--) {
-		sprintf(buf, "%s%d%s", name_pre, index, ".ucode");
-		ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev);
-		if (ret < 0) {
-			IWL_ERR(priv, "%s firmware file req failed: %d\n",
-				  buf, ret);
-			if (ret == -ENOENT)
-				continue;
-			else
-				goto error;
-		} else {
-			if (index < api_max)
-				IWL_ERR(priv, "Loaded firmware %s, "
-					"which is deprecated. "
-					"Please use API v%u instead.\n",
-					  buf, api_max);
-
-			IWL_DEBUG_INFO(priv, "Got firmware '%s' file (%zd bytes) from disk\n",
-				       buf, ucode_raw->size);
-			break;
-		}
+	if (!ucode_raw) {
+		IWL_ERR(priv, "request for firmware file '%s' failed.\n",
+			priv->firmware_name);
+		goto try_again;
 	}
 
-	if (ret < 0)
-		goto error;
+	IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
+		       priv->firmware_name, ucode_raw->size);
 
 	/* Make sure that we got at least the v1 header! */
 	if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
 		IWL_ERR(priv, "File size way too small!\n");
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	/* Data from ucode file:  header followed by uCode images */
@@ -1540,10 +1547,9 @@
 		IWL_ERR(priv, "Driver unable to support your firmware API. "
 			  "Driver supports v%u, firmware is v%u.\n",
 			  api_max, api_ver);
-		priv->ucode_ver = 0;
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
+
 	if (api_ver != api_max)
 		IWL_ERR(priv, "Firmware has old API version. Expected v%u, "
 			  "got v%u. New firmware can be obtained "
@@ -1585,6 +1591,12 @@
 	IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
 		       boot_size);
 
+	/*
+	 * For any of the failures below (before allocating pci memory)
+	 * we will try to load a version with a smaller API -- maybe the
+	 * user just got a corrupted version of the latest API.
+	 */
+
 	/* Verify size of file vs. image size info in file's header */
 	if (ucode_raw->size !=
 		priv->cfg->ops->ucode->get_header_size(api_ver) +
@@ -1594,41 +1606,35 @@
 		IWL_DEBUG_INFO(priv,
 			"uCode file size %d does not match expected size\n",
 			(int)ucode_raw->size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	/* Verify that uCode images will fit in card's SRAM */
 	if (inst_size > priv->hw_params.max_inst_size) {
 		IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
 			       inst_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	if (data_size > priv->hw_params.max_data_size) {
 		IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
 				data_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 	if (init_size > priv->hw_params.max_inst_size) {
 		IWL_INFO(priv, "uCode init instr len %d too large to fit in\n",
 			init_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 	if (init_data_size > priv->hw_params.max_data_size) {
 		IWL_INFO(priv, "uCode init data len %d too large to fit in\n",
 		      init_data_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 	if (boot_size > priv->hw_params.max_bsm_size) {
 		IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n",
 			boot_size);
-		ret = -EINVAL;
-		goto err_release;
+		goto try_again;
 	}
 
 	/* Allocate ucode buffers for card's bus-master loading ... */
@@ -1712,20 +1718,36 @@
 	IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
 	memcpy(priv->ucode_boot.v_addr, src, len);
 
+	/**************************************************
+	 * This is still part of probe() in a sense...
+	 *
+	 * 9. Setup and register with mac80211 and debugfs
+	 **************************************************/
+	err = iwl_mac_setup_register(priv);
+	if (err)
+		goto out_unbind;
+
+	err = iwl_dbgfs_register(priv, DRV_NAME);
+	if (err)
+		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
+
 	/* We have our copies now, allow OS release its copies */
 	release_firmware(ucode_raw);
-	return 0;
+	return;
+
+ try_again:
+	/* try next, if any */
+	if (iwl_request_firmware(priv, false))
+		goto out_unbind;
+	release_firmware(ucode_raw);
+	return;
 
  err_pci_alloc:
 	IWL_ERR(priv, "failed to allocate pci memory\n");
-	ret = -ENOMEM;
 	iwl_dealloc_ucode_pci(priv);
-
- err_release:
+ out_unbind:
+	device_release_driver(&priv->pci_dev->dev);
 	release_firmware(ucode_raw);
-
- error:
-	return ret;
 }
 
 static const char *desc_lookup_text[] = {
@@ -2631,7 +2653,7 @@
 	 */
 	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
-	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX + 1;
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
 	/* we create the 802.11 header and a zero-length SSID element */
 	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
 
@@ -2667,21 +2689,7 @@
 
 	/* we should be verifying the device is ready to be opened */
 	mutex_lock(&priv->mutex);
-
-	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
-	 * ucode filename and max sizes are card-specific. */
-
-	if (!priv->ucode_code.len) {
-		ret = iwl_read_ucode(priv);
-		if (ret) {
-			IWL_ERR(priv, "Could not read microcode: %d\n", ret);
-			mutex_unlock(&priv->mutex);
-			return ret;
-		}
-	}
-
 	ret = __iwl_up(priv);
-
 	mutex_unlock(&priv->mutex);
 
 	if (ret)
@@ -3654,17 +3662,10 @@
 	iwl_power_initialize(priv);
 	iwl_tt_initialize(priv);
 
-	/**************************************************
-	 * 9. Setup and register with mac80211 and debugfs
-	 **************************************************/
-	err = iwl_mac_setup_register(priv);
+	err = iwl_request_firmware(priv, true);
 	if (err)
 		goto out_remove_sysfs;
 
-	err = iwl_dbgfs_register(priv, DRV_NAME);
-	if (err)
-		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
-
 	return 0;
 
  out_remove_sysfs:
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index ab891b9..6054c5f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1132,6 +1132,7 @@
 	u8   rev_id;
 
 	/* uCode images, save to reload in case of failure */
+	int fw_index;			/* firmware we're trying to load */
 	u32 ucode_ver;			/* version of ucode, copy of
 					   iwl_ucode.ver */
 	struct fw_desc ucode_code;	/* runtime inst */
@@ -1142,6 +1143,7 @@
 	struct fw_desc ucode_boot;	/* bootstrap inst */
 	enum ucode_type ucode_type;
 	u8 ucode_write_complete;	/* the image write is complete */
+	char firmware_name[25];
 
 
 	struct iwl_rxon_time_cmd rxon_timing;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index dd9ff2e..bd2f7c4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -638,20 +638,9 @@
 	if (left < 0)
 		return 0;
 	*pos++ = WLAN_EID_SSID;
-	if (!priv->is_internal_short_scan &&
-	    priv->scan_request->n_ssids) {
-		struct cfg80211_ssid *ssid =
-			priv->scan_request->ssids;
+	*pos++ = 0;
 
-		/* Broadcast if ssid_len is 0 */
-		*pos++ = ssid->ssid_len;
-		memcpy(pos, ssid->ssid, ssid->ssid_len);
-		pos += ssid->ssid_len;
-		len += 2 + ssid->ssid_len;
-	} else {
-		*pos++ = 0;
-		len += 2;
-	}
+	len += 2;
 
 	if (WARN_ON(left < ie_len))
 		return len;
@@ -780,26 +769,20 @@
 	if (priv->is_internal_short_scan) {
 		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
 	} else if (priv->scan_request->n_ssids) {
+		int i, p = 0;
 		IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
-		/*
-		 * The first SSID to scan is stuffed into the probe request
-		 * template and the remaining ones are handled through the
-		 * direct_scan array.
-		 */
-		if (priv->scan_request->n_ssids > 1) {
-			int i, p = 0;
-			for (i = 1; i < priv->scan_request->n_ssids; i++) {
-				if (!priv->scan_request->ssids[i].ssid_len)
-					continue;
-				scan->direct_scan[p].id = WLAN_EID_SSID;
-				scan->direct_scan[p].len =
-					priv->scan_request->ssids[i].ssid_len;
-				memcpy(scan->direct_scan[p].ssid,
-				       priv->scan_request->ssids[i].ssid,
-				       priv->scan_request->ssids[i].ssid_len);
-				n_probes++;
-				p++;
-			}
+		for (i = 0; i < priv->scan_request->n_ssids; i++) {
+			/* always does wildcard anyway */
+			if (!priv->scan_request->ssids[i].ssid_len)
+				continue;
+			scan->direct_scan[p].id = WLAN_EID_SSID;
+			scan->direct_scan[p].len =
+				priv->scan_request->ssids[i].ssid_len;
+			memcpy(scan->direct_scan[p].ssid,
+			       priv->scan_request->ssids[i].ssid,
+			       priv->scan_request->ssids[i].ssid_len);
+			n_probes++;
+			p++;
 		}
 		is_active = true;
 	} else
diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h
index a3a79b5..a855a99 100644
--- a/drivers/net/wireless/iwmc3200wifi/lmac.h
+++ b/drivers/net/wireless/iwmc3200wifi/lmac.h
@@ -262,7 +262,7 @@
 
 /* Power Management */
 #define POWER_TABLE_CMD			0x77
-#define SAVE_RESTORE_ADRESS_CMD		0x78
+#define SAVE_RESTORE_ADDRESS_CMD		0x78
 #define REPLY_WATERMARK_CMD		0x79
 #define PM_DEBUG_STATISTIC_NOTIFIC	0x7B
 #define PD_FLUSH_N_NOTIFICATION		0x7C
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 9f6d6bf..2887047 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -1496,51 +1496,67 @@
 {
 	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct dev_mc_list *mclist;
-	__le32 filter;
-	int ret, i, size;
-	char *buf;
+	__le32 filter, basefilter;
+	int ret;
+	char *mc_addrs = NULL;
+	int mc_count;
 
-	filter = RNDIS_PACKET_TYPE_DIRECTED | RNDIS_PACKET_TYPE_BROADCAST;
+	basefilter = filter = RNDIS_PACKET_TYPE_DIRECTED |
+			      RNDIS_PACKET_TYPE_BROADCAST;
 
-	netif_addr_lock_bh(usbdev->net);
 	if (usbdev->net->flags & IFF_PROMISC) {
 		filter |= RNDIS_PACKET_TYPE_PROMISCUOUS |
 			RNDIS_PACKET_TYPE_ALL_LOCAL;
-	} else if (usbdev->net->flags & IFF_ALLMULTI ||
-		   netdev_mc_count(usbdev->net) > priv->multicast_size) {
+	} else if (usbdev->net->flags & IFF_ALLMULTI) {
 		filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
-	} else if (!netdev_mc_empty(usbdev->net)) {
-		size = min(priv->multicast_size, netdev_mc_count(usbdev->net));
-		buf = kmalloc(size * ETH_ALEN, GFP_KERNEL);
-		if (!buf) {
+	}
+
+	if (filter != basefilter)
+		goto set_filter;
+
+	/*
+	 * mc_list should be accessed holding the lock, so copy addresses to
+	 * local buffer first.
+	 */
+	netif_addr_lock_bh(usbdev->net);
+	mc_count = netdev_mc_count(usbdev->net);
+	if (mc_count > priv->multicast_size) {
+		filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
+	} else if (mc_count) {
+		int i = 0;
+
+		mc_addrs = kmalloc(mc_count * ETH_ALEN, GFP_ATOMIC);
+		if (!mc_addrs) {
 			netdev_warn(usbdev->net,
 				    "couldn't alloc %d bytes of memory\n",
-				    size * ETH_ALEN);
+				    mc_count * ETH_ALEN);
 			netif_addr_unlock_bh(usbdev->net);
 			return;
 		}
 
-		i = 0;
-		netdev_for_each_mc_addr(mclist, usbdev->net) {
-			if (i == size)
-				break;
-			memcpy(buf + i++ * ETH_ALEN, mclist->dmi_addr, ETH_ALEN);
-		}
+		netdev_for_each_mc_addr(mclist, usbdev->net)
+			memcpy(mc_addrs + i++ * ETH_ALEN,
+			       mclist->dmi_addr, ETH_ALEN);
+	}
+	netif_addr_unlock_bh(usbdev->net);
 
-		ret = rndis_set_oid(usbdev, OID_802_3_MULTICAST_LIST, buf,
-								i * ETH_ALEN);
-		if (ret == 0 && i > 0)
+	if (filter != basefilter)
+		goto set_filter;
+
+	if (mc_count) {
+		ret = rndis_set_oid(usbdev, OID_802_3_MULTICAST_LIST, mc_addrs,
+				    mc_count * ETH_ALEN);
+		kfree(mc_addrs);
+		if (ret == 0)
 			filter |= RNDIS_PACKET_TYPE_MULTICAST;
 		else
 			filter |= RNDIS_PACKET_TYPE_ALL_MULTICAST;
 
 		netdev_dbg(usbdev->net, "OID_802_3_MULTICAST_LIST(%d, max: %d) -> %d\n",
-			   i, priv->multicast_size, ret);
-
-		kfree(buf);
+			   mc_count, priv->multicast_size, ret);
 	}
-	netif_addr_unlock_bh(usbdev->net);
 
+set_filter:
 	ret = rndis_set_oid(usbdev, OID_GEN_CURRENT_PACKET_FILTER, &filter,
 							sizeof(filter));
 	if (ret < 0) {
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index ee34c13..9b04964 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -368,7 +368,7 @@
 
 		/*
 		 * The encryption key doesn't fit within the CSR cache,
-		 * this means we should allocate it seperately and use
+		 * this means we should allocate it separately and use
 		 * rt2x00usb_vendor_request() to send the key to the hardware.
 		 */
 		reg = KEY_ENTRY(key->hw_key_idx);
@@ -382,7 +382,7 @@
 		/*
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it demands the data to be provided
-		 * both seperately as well as inside the frame.
+		 * both separately as well as inside the frame.
 		 * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
 		 * to ensure rt2x00lib will not strip the data from the
 		 * frame after the copy, now we must tell mac80211
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index aca8c12..91cce2d 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1225,7 +1225,7 @@
 #ifdef CONFIG_RT2800PCI_SOC
 static int rt2800soc_probe(struct platform_device *pdev)
 {
-	return rt2x00soc_probe(pdev, rt2800pci_ops);
+	return rt2x00soc_probe(pdev, &rt2800pci_ops);
 }
 
 static struct platform_driver rt2800soc_driver = {
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 5e4ee20..d27d7d5 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -99,7 +99,7 @@
 	 * There are 2 variations of the rt2870 firmware.
 	 * a) size: 4kb
 	 * b) size: 8kb
-	 * Note that (b) contains 2 seperate firmware blobs of 4k
+	 * Note that (b) contains 2 separate firmware blobs of 4k
 	 * within the file. The first blob is the same firmware as (a),
 	 * but the second blob is for the additional chipsets.
 	 */
@@ -117,7 +117,7 @@
 
 	/*
 	 * 8kb firmware files must be checked as if it were
-	 * 2 seperate firmware files.
+	 * 2 separate firmware files.
 	 */
 	while (offset < len) {
 		if (!rt2800usb_check_crc(data + offset, 4096))
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 70c04c2..28a1c46 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -109,7 +109,7 @@
 
 	/*
 	 * HW crypto statistics.
-	 * All statistics are stored seperately per cipher type.
+	 * All statistics are stored separately per cipher type.
 	 */
 	struct rt2x00debug_crypto crypto_stats[CIPHER_MAX];
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index b93731b..dd5ab8f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -394,7 +394,7 @@
 	/*
 	 * Hardware might have stripped the IV/EIV/ICV data,
 	 * in that case it is possible that the data was
-	 * provided seperately (through hardware descriptor)
+	 * provided separately (through hardware descriptor)
 	 * in which case we should reinsert the data into the frame.
 	 */
 	if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 0b4801a..5b6b789 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -497,7 +497,7 @@
 	/*
 	 * When hardware encryption is supported, and this frame
 	 * is to be encrypted, we should strip the IV/EIV data from
-	 * the frame so we can provide it to the driver seperately.
+	 * the frame so we can provide it to the driver separately.
 	 */
 	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
 	    !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) {
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.c b/drivers/net/wireless/rt2x00/rt2x00soc.c
index 4efdc96..111c0ff 100644
--- a/drivers/net/wireless/rt2x00/rt2x00soc.c
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
@@ -112,6 +112,7 @@
 
 	return retval;
 }
+EXPORT_SYMBOL_GPL(rt2x00soc_probe);
 
 int rt2x00soc_remove(struct platform_device *pdev)
 {
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.h b/drivers/net/wireless/rt2x00/rt2x00soc.h
index 4739edf..474cbfc 100644
--- a/drivers/net/wireless/rt2x00/rt2x00soc.h
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.h
@@ -26,8 +26,6 @@
 #ifndef RT2X00SOC_H
 #define RT2X00SOC_H
 
-#define KSEG1ADDR(__ptr) __ptr
-
 /*
  * SoC driver handlers.
  */
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index e2da928..1774727 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -476,7 +476,7 @@
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index f39a8ed..290d70b 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -339,7 +339,7 @@
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
@@ -439,7 +439,7 @@
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
@@ -1661,7 +1661,7 @@
 
 		/*
 		 * Hardware has stripped IV/EIV data from 802.11 frame during
-		 * decryption. It has provided the data seperately but rt2x00lib
+		 * decryption. It has provided the data separately but rt2x00lib
 		 * should decide if it should be reinserted.
 		 */
 		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
@@ -2352,6 +2352,8 @@
 	{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* CEIVA */
+	{ USB_DEVICE(0x178d, 0x02be), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* CNet */
 	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 2d555cc..00e09e2 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -350,7 +350,7 @@
 	first_idx = info->status.rates[0].idx;
 	ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
 	retries = &zd_retry_rates[first_idx];
-	ZD_ASSERT(0<=retry && retry<=retries->count);
+	ZD_ASSERT(1 <= retry && retry <= retries->count);
 
 	info->status.rates[0].idx = retries->rate[0];
 	info->status.rates[0].count = 1; // (retry > 1 ? 2 : 1);
@@ -360,7 +360,7 @@
 		info->status.rates[i].count = 1; // ((i==retry-1) && success ? 1:2);
 	}
 	for (; i<IEEE80211_TX_MAX_RATES && i<retry; i++) {
-		info->status.rates[i].idx = retries->rate[retry-1];
+		info->status.rates[i].idx = retries->rate[retry - 1];
 		info->status.rates[i].count = 1; // (success ? 1:2);
 	}
 	if (i<IEEE80211_TX_MAX_RATES)
@@ -374,7 +374,7 @@
  * zd_mac_tx_failed - callback for failed frames
  * @dev: the mac80211 wireless device
  *
- * This function is called if a frame couldn't be successfully be
+ * This function is called if a frame couldn't be successfully
  * transferred. The first frame from the tx queue, will be selected and
  * reported as error to the upper layers.
  */
@@ -424,12 +424,10 @@
 		first_idx = info->status.rates[0].idx;
 		ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
 		retries = &zd_retry_rates[first_idx];
-		if (retry < 0 || retry > retries->count) {
+		if (retry <= 0 || retry > retries->count)
 			continue;
-		}
 
-		ZD_ASSERT(0<=retry && retry<=retries->count);
-		final_idx = retries->rate[retry-1];
+		final_idx = retries->rate[retry - 1];
 		final_rate = zd_rates[final_idx].hw_value;
 
 		if (final_rate != tx_status->rate) {
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 0bc5d47..1062b8f 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -481,7 +481,7 @@
 	return ret;
 }
 
-static struct sysfs_ops pdcspath_attr_ops = {
+static const struct sysfs_ops pdcspath_attr_ops = {
 	.show = pdcspath_attr_show,
 	.store = pdcspath_attr_store,
 };
diff --git a/drivers/parport/ChangeLog b/drivers/parport/ChangeLog
deleted file mode 100644
index 8565bbbe..0000000
--- a/drivers/parport/ChangeLog
+++ /dev/null
@@ -1,583 +0,0 @@
-2001-10-11  Tim Waugh  <twaugh@redhat.com>
-	* parport_pc.c, parport_serial.c: Support for NetMos cards.
-	+ Patch originally from Michael Reinelt <reinelt@eunet.at>.
-
-2002-04-25  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_serial.c, parport_pc.c: Move some SIIG cards around.
-	Patch from Andrey Panin.
-
-2002-01-20  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_compat_write_block_pio,
-	parport_pc_ecp_write_block_pio, parport_pc_ecp_read_block_pio):
-	Use the default implementations if the caller wants to use
-	O_NONBLOCK.
-
-2002-02-25  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Make sure that priv->ctr_writable includes IntEn
-	even if IRQ is given as a parameter.
-
-2002-01-21  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c: Apply patch from Max Vorobiev to make parport_daisy_select
-	work for ECP/EPP modes.
-
-2002-01-13  Niels Kristian Bech Jensen  <nkbj@image.dk>
-
-	* parport_pc.c: Change some occurrences of frob_set_mode to
-	ECR_WRITE.  This fixes PLIP.
-
-2002-01-04  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_claim_or_block): Sleep interruptibly to prevent
-	a possible deadlock.
-
-2001-12-07  Damian Gruszka  <damian.gruszka@VisionSystems.de>
-
-	* parport_pc.c (ECR_WRITE): Define.  If there are forbidden bits
-	in the ECR register for some chips, this will be a useful place to
-	put that knowledge.
-	(change_mode): Use ECR_WRITE.
-	(parport_pc_restore_state): Likewise.
-	(parport_ECPPS2_supported): Likewise.
-	(parport_ECPEPP_supported): Likewise.
-	(irq_probe_EPP): Likewise.
-	(programmable_irq_support): Likewise.
-	(programmable_dma_support): Likewise.
-	(parport_pc_probe_port): Likewise.
-
-	(frob_set_mode): New function.  Set the mode bits of the ECR.
-	(get_fifo_residue): Use frob_set_mode.
-	(parport_pc_ecpepp_read_data): Likewise.
-	(parport_pc_ecpepp_write_data): Likewise.
-	(parport_pc_ecpepp_read_addr): Likewise.
-	(parport_pc_ecpepp_write_addr): Likewise.
-	(parport_pc_compat_write_block_pio): Likewise.
-	(parport_pc_ecp_write_block_pio): Likewise.
-	(parport_ECR_present): Likewise.
-	(parport_ECP_supported): Likewise.
-	(parport_EPP_supported): Likewise.
-	(parport_ECPEPP_supported): Likewise.
-	(programmable_irq_support): Likewise.
-	(irq_probe_ECP): Likewise.
-	(programmable_dma_support): Likewise.
-
-	(parport_pc_enable_irq): Only enable interrupts if we know which
-	IRQ line they will come from.
-	(parport_pc_init_state): Set nErrIntrEn at initialisation.
-	(parport_pc_restore_state): Only write writable bits of CTR.
-	(parport_irq_probe): If no IRQ is found, take ackIntEn out of the
-	writable bit set.
-
-2001-12-07  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_fifo_write_block_pio): Correct typo.
-	(parport_pc_init_state): Only set ackIntEn if we know which IRQ
-	line the interrupts will come from.
-
-2001-12-07  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (parport_ieee1284_epp_write_addr,
-	parport_ieee1284_epp_read_addr): Actually do something useful.
-
-2001-12-07  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (dmaval): Don't use DMA by default.  It seems to be
-	too buggy at the moment.  Use 'dma=auto' to restore the previous
-	behaviour.
-
-2001-12-07  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c (DEBUG): Undefine.
-
-2001-12-06  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (parport_ieee1284_ecp_read_data): Mask off
-	PARPORT_CONTROL_AUTOFD as well.  Bug spotted by Joe
-	<joeja@mindspring.com>.
-
-2001-12-03  Rich Liu  <Rich.Liu@ite.com.tw>
-
-	* parport_pc.c (sio_ite_8872_probe): ITE8873 is a single-port
-	serial board, not a serial+parallel.
-
-2001-11-30  Niels Kristian Bech Jensen  <nkbj@image.dk>
-
-	* parport_pc.c: Fix compiler warning.
-
-2001-11-14  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_pci_probe): Hooks for PCI cards before
-	and after probing for ports.
-	* parport_serial.c (parport_register): Likewise.
-
-2001-11-12  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (init_module): Warn when parameters are ignored.
-
-2001-11-01  Damian Gruszka  <damian.gruszka@VisionSystems.de>
-
-	* parport_serial.c (serial_register): Set base_baud before
-	calling register_serial.
-
-2001-10-26  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_irq_probe): When ECR programmable IRQ
-	support fails, generate interrupts using the FIFO even if we don't
-	want to use the FIFO for real data transfers.
-	(parport_pc_probe_port): Display the ECR address if we have an
-	ECR, not just if we will use the FIFO.
-
-2001-10-24  Dave Strauss  <D.Strauss@motorola.com>
-
-	* parport_pc.c (parport_pc_compat_write_block_pio,
-	parport_pc_ecp_write_block_pio): Allow a few seconds for an ECP
-	transfer to finish up.
-
-2001-10-11  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc (sio_ite_8872_probe): New function, submitted by Rich
-	Liu from ITE.  Cleaned up, removed bogus phys_to_virt calls.
-
-2001-10-24  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Support for AKS AladdinCARD.  Patch from
-	Aladdin Knowledge Systems (Christian Groessler).
-
-2001-10-24  Tim Waugh  <twaugh@redhat.com>
-	
-	* ieee1284_ops.c (parport_ieee1284_ecp_read_data): Try to minimise
-	turnaround time.
-
-	* ieee1284.c (parport_poll_peripheral): Try a couple of times
-	first without delaying.
-
-2001-10-10  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Support for OX16PCI954 PCI card.
-
-2001-10-10  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Support for OX12PCI840 PCI card (reported by
-	mk@daveg.com).  Lock-ups diagnosed by Ronnie Arosa (and now we
-	just don't trust its ECR).
-
-2001-10-10  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c: Support for AVLAB cards.
-
-2001-10-10  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (ecp_forward_to_reverse, ecp_reverse_to_forward):
-	Remember to retry direction switch if it fails.  Patch from David
-	Lambert.
-
-2001-10-08  David C. Hansen  <haveblue@us.ibm.com>
-
-	* share.c: Make driverlist_lock and parportlist_lock static.
-
-2001-10-08  Philip Blundell  <philb@gnu.org>
-
-	* parport_pc.c: New modular parameter verbose_logging.
-	Make port->modes indicate the modes that we are prepared to use,
-	rather than the modes that are available.
-
-2001-10-07  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_probe_port): Fix memory leak spotted by
-	Kipp Cannon.
-
-2001-10-07  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_serial.c: Remove NetMos support, since it causes problems
-	for some people.
-
-2001-08-30  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_serial.c (parport_serial_pci_probe): Clean-up on partial
-	registration failure.
-
-2001-08-14  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_init_superio): Allow for more than one
-	SuperIO device.  Patch from Rich Lio (ITE).
-
-2001-08-11  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Support for Titan Electronics cards.
-
-2001-08-08  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_unregister_device): Remove device from wait list
-	too.
-
-2001-06-20  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Make 'io_hi=0' work.
-
-2001-05-31  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_serial.c: New file.
-
-2001-06-05  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_unregister_port): New exported function.
-	Do the opposite of parport_pc_probe_port.
-	(cleanup_module): Use it.
-
-2001-05-22  Juan Quintela  <quintela@mandrakesoft.com>
-
-	* parport_amiga.c: Set printk levels.
-	* parport_gsc.c: Likewise.
-	* parport_mfc3.c: Likewise.
-	* parport_pc.c: Likewise.
-	* parport_sunbpp.c: Likewise.
-	* probe.c: Likewise.
-	* share.c: Likewise.
-
-2001-05-10  Fred Barnes  <frmb2@ukc.ac.uk>
-
-       * parport_pc.c (parport_pc_epp_read_data): added support for
-       reading from a w91284pic peripheral, flag is PARPORT_W91284PIC.
-
-2001-05-07  Fred Barnes  <frmb2@ukc.ac.uk>
- 
- 	* parport_pc.c (parport_pc_epp_read_data,
-	parport_pc_epp_write_data, parport_pc_epp_read_addr,
-	parport_pc_epp_write_addr): support for fast reads/writes using
-	the PARPORT_EPP_FAST flag.
- 
- 	* ieee1284.c (parport_read, parport_write): added code to handle
-	software EPP mode (IEEE1284_MODE_EPPSWE).  Added code to allow
-	BYTE mode reverse transfers (previously always went for NIBBLE
-	mode).
- 
- 	* ieee1284_ops.c (parport_ieee1284_epp_read_data,
-	parport_ieee1284_epp_write_data): fixed various polarity problems.
-	Also (theoretically) fixed address versions (.._addr), but no
-	hardware to test this on.
- 
- 	* parport_pc.h: added parport_dump_state() function for debugging.
- 	Needs to have DEBUG_PARPORT to be defined for it to be included.
- 
-2001-05-03  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Fix the compile problem I introduce from the last
-	change.
-
-2001-04-20  Paul Gortmaker  <p_gortmaker@yahoo.com>
-
-	* parport_pc.c: Cut down the size quite a bit (more than 4k off
-	the object, about 1k off the zImage) for the older non-PCI
-	machines which are typically resource starved anyway...
-
-2001-03-26  R Horn  <rjh@world.std.com>
-
-	* parport_pc.c: Some commentary changes.
-
-2001-04-19  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_probe_port): Remove __devinit
-	attribute.  Export unconditionally.
-
-2001-04-14  Jeff Garzik  <jgarzik@pobox.com>
-
-	Merged:  2001-03-30  Tim Waugh  <twaugh@redhat.com>
-
-        * drivers/parport/parport_pc.c: Make Via SuperIO chipsets behave
-        like everything else with respect to irq= and dma= parameters.
-
-2001-04-08  Tim Waugh  <twaugh@redhat.com>
-
-      * parport_pc.c (parport_pc_save_state): Read from the soft copy of
-      the control port.
-      (parport_pc_restore_state): Update the soft copy of the control
-      port.
-
-2001-03-26  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_find_number, parport_find_base): Trigger
-	a lowlevel driver load if there are no ports yet.
-
-2001-03-26  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_ECP_supported): Remove the IRQ conflict
-	check since it seems totally unreliable.
-
-2001-03-02  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (parport_ieee1284_read_nibble): Reset nAutoFd
-	on timeout.  Matches 2.2.x behaviour.
-
-2001-03-02  Andrew Morton
-
-	* parport_pc.c (registered_parport): New static variable.
-	(parport_pc_find_ports): Set it when we register PCI driver.
-	(init_module): Unregister PCI driver if necessary when we
-	fail.
-
-2001-03-02  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284_ops.c (parport_ieee1284_write_compat): Don't use
-	down_trylock to reset the IRQ count.  Don't even use sema_init,
-	because it's not even necessary to reset the count.  I can't
-	remember why we ever did.
-
-2001-01-04  Peter Osterlund  <peter.osterlund@mailbox.swipnet.se>
-
-	* ieee1284.c (parport_negotiate): Fix missing printk argument.
-
-2001-01-03  Paul Schleger  <Paul.Schleger@t-online.de>
-
-	* probe.c (parse_data): Get rid of trailing blanks in values.
-	Needed for XEROX XJ8C printer.
-
-2001-01-03  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_probe_port): Say something when probes
-	are omitted.
-
-2001-01-03  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (sio_via_686a_probe): Correct dma=255 fix.
-
-2000-11-21  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_ecp_write_block_pio): Fix
-	reverse-to-forward logic.  Spotted by Roland Kuck
-	<rci@cityweb.de>.
-
-2000-09-16  Cesar Eduardo Barros  <cesarb@nitnet.com.br>
-
-	* parport_pc.c (sio_via_686a_probe): Handle case
-	where hardware returns 255 for IRQ or DMA.
-
-2000-07-20  Eddie C. Dost  <ecd@skynet.be>
-
-	* share.c (attach_driver_chain): attach[i](port) needs to be
-	replaced by attach[count](port).
-
-2000-07-20  Eddie C. Dost  <ecd@skynet.be>
-
-	* daisy.c (add_dev): kmalloc args are in wrong order.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c: Documentation for parport_{get,port}_port,
-	parport_find_{number,base}.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_unregister_device): Remove unneeded locking
-	(test cad==dev).
-	(parport_claim): Likewise.
-	(parport_find_number): New function.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_register_port): Hold the parportlist_lock while
-	looking for a free parport number.
-	(parport_register_driver): Make sure that attach can block.
-	(attach_driver_chain): Likewise.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (call_driver_chain): Do reference counting things.
-	(parport_get_port): New function.
-	(parport_put_port): New function.
-	(parport_register_port): Initialise reference count to zero.
-	(parport_unregister_port): Check reference count rather than
-	driver list to see if we can free the port.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c: Clarifications in doc comments.
-
-2000-07-12  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_unregister_port): Fix typo in comment.
-
-2000-07-11  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c: Support for the full range of Timedia cards.
-
-2000-07-08  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c: License block comments as part of parportbook.
-	* ieee1284.c: Likewise.
-	* share.c: Likewise.
-
-2000-06-30  Petr Vandrovec  <vandrove@vc.cvut.cz>
-
-	* procfs.c (do_hardware_modes): Generated string can be up to 34
-	chars long.
-
-2000-06-20  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c (parport_pc_compat_write_block_pio): Warn about
-	change_mode failures.
-	(parport_pc_ecp_write_block_pio): Likewise.
-	(parport_pc_ecp_read_block_pio): Likewise.
-
-2000-06-20  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c (parport_SPP_supported): Warn more about possibly
-	incorrect parameters.
-
-2000-06-15  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_ECP_supported): Set PARPORT_MODE_COMPAT
-	for ECP ports, since they can all do hardware accelerated
-	compatibility mode (I assume).
-
-2000-06-13  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (cleanup_module): Remark about possible bugs.
-
-2000-06-13  Tim Waugh  <twaugh@redhat.com>
-
-	* procfs.c: Break 'hardware' out into separate files.
-
-2000-05-28  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* Fix PCI ID printk for non-superio PCI cards.
-
-2000-05-28  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (call_driver_chain): Get the driverlist_lock.
-	(parport_register_device): Make sure that port->devices always
-	looks consistent.
-	(parport_register_driver): Ensure that parport drivers are given
-	parameters that are valid for the duration of the callback by
-	locking the portlist against changes.
-	(parport_unregister_driver): Likewise.
-	(parport_claim): Don't overwrite flags.
-
-2000-05-28  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c (assign_addrs): Avoid double-probing daisy-chain devices
-	if the first probe succeeds.
-
-2000-05-16  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_claim): Fix SMP race.
-
-2000-05-15  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c (parport_pc_compat_write_block_pio): Check for
-	timeouts.
-	(parport_pc_ecp_write_block_pio): Likewise.
-	(parport_pc_ecp_read_block_pio): Likewise.
-
-2000-05-02  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c: PCI SYBA patch and verbose PCI detection.
-
-2000-05-02  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
-
-	* parport_pc.c (decode_smsc): Fix SMSC 665/666 identification.
-
-2000-04-28  Tim Waugh  <twaugh@redhat.com>
-
-	* ieee1284.c: Short function descriptions can't be multiline.
-
-	* daisy.c: Short function descriptions can't be multiline.
-
-2000-04-19  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_fifo_write_block_dma): Make maxlen
-	calculation a bit clearer.
-
-	* ieee1284.c (parport_negotiate): Turn on data line drivers.
-
-	* ieee1284_ops.c (parport_ieee1284_read_byte): Turn off data line
-	drivers.
-	(parport_ieee1284_write_compat): Turn on data line drivers.
-
-	* daisy.c (assign_addrs): Turn on data line drivers.
-	(cpp_mux): Likewise.
-	(cpp_daisy): Likewise.
-
-2000-04-04  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Add support for another PCI card.
-
-2000-04-04  Tim Waugh  <twaugh@redhat.com>
-
-	* daisy.c: Documentation in kernel-doc format.
-
-	* ieee1284.c: Likewise.
-
-	* share.c: Likewise.
-
-2000-04-01  Tim Waugh  <twaugh@redhat.com>
-
-	* share.c (parport_register_device): Need to hold the module
-	reference counts before sleeping.
-
-2000-03-27  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_ecp_read_block_pio): Correct operation
-	when peripheral is trying to send data when we stop listening.
-
-2000-03-22  Tim Waugh  <twaugh@redhat.com>
-
-	* init.c (parport_setup): Fix return value.
-
-2000-03-21  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_pci_probe): Fix return value; call
-	pci_enable_device.
-
-2000-03-16  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_ECP_supported): This seems to trigger on
-	machines that don't have an IRQ conflict; toned down the warning
-	message accordingly.
-
-2000-03-16  Gunther Mayer  <gunther.mayer@braunschweig.netsurf.de>
-
-	* parport_pc.c (show_parconfig_smsc37c669): Fix typo.
-	(decode_winbond): More IDs.
-	(winbond_check): Protect against false positives.
-	(winbond_check2): Likewise.
-	(smsc_check): Likewise.
-
-2000-03-15  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (cleanup_module): Don't call pci_unregister_driver
-	if we didn't call pci_register_driver first.
-
-2000-03-13  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (parport_pc_init): Moved from asm/parport.h.
-
-	* Config.in: CONFIG_PARPORT_PC_SUPERIO: new option.
-
-	* parport_pc.c (show_parconfig_smsc37c669): Make __devinit.
-	(show_parconfig_winbond): Likewise.
-	(decode_winbond): Likewise.
-	(decode_smsc): Likewise.
-	(winbond_check): Likewise.
-	(winbond_check2): Likewise.
-	(smsc_check): Likewise.
-	(detect_and_report_winbond): Likewise.
-	(detect_and_report_smsc): Likewise.
-	(get_superio_dma): Likewise.
-	(get_superio_irq): Likewise.
-	(parport_pc_find_isa_ports): New function.
-	(parport_pc_find_ports): New function.
-	(init_module): Make superio a config option, not a parameter.
-
-2000-03-10  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c (decode_winbond): Use correct 83877ATF chip ID.
-	(decode_winbond): Fix typo.
-
-2000-03-09  Tim Waugh  <twaugh@redhat.com>
-
-	* parport_pc.c: Integrate SuperIO PCI probe with normal PCI card
-	probe, so that the MODULE_DEVICE_TABLE is complete.
-
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 712250f..26301cb 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -288,9 +288,9 @@
 			next = dev->bus_list.next;
 
 		/* Run device routines with the device locked */
-		down(&dev->dev.sem);
+		device_lock(&dev->dev);
 		retval = cb(dev, userdata);
-		up(&dev->dev.sem);
+		device_unlock(&dev->dev);
 		if (retval)
 			break;
 	}
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index cb2fd01..b5dad9f3 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -749,6 +749,24 @@
 	return retval;
 }
 
+static void acpiphp_set_acpi_region(struct acpiphp_slot *slot)
+{
+	struct acpiphp_func *func;
+	union acpi_object params[2];
+	struct acpi_object_list arg_list;
+
+	list_for_each_entry(func, &slot->funcs, sibling) {
+		arg_list.count = 2;
+		arg_list.pointer = params;
+		params[0].type = ACPI_TYPE_INTEGER;
+		params[0].integer.value = ACPI_ADR_SPACE_PCI_CONFIG;
+		params[1].type = ACPI_TYPE_INTEGER;
+		params[1].integer.value = 1;
+		/* _REG is optional, we don't care about if there is failure */
+		acpi_evaluate_object(func->handle, "_REG", &arg_list, NULL);
+	}
+}
+
 /**
  * enable_device - enable, configure a slot
  * @slot: slot to be enabled
@@ -805,6 +823,7 @@
 	pci_bus_assign_resources(bus);
 	acpiphp_sanitize_bus(bus);
 	acpiphp_set_hpp_values(bus);
+	acpiphp_set_acpi_region(slot);
 	pci_enable_bridges(bus);
 	pci_bus_add_devices(bus);
 
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index 6151389..0a894ef 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -73,7 +73,7 @@
 }
 
 static struct kobj_type legacy_ktype = {
-	.sysfs_ops = &(struct sysfs_ops){
+	.sysfs_ops = &(const struct sysfs_ops){
 		.store = legacy_store, .show = legacy_show
 	},
 	.release = &legacy_release,
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 807224e..de29645 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -642,6 +642,7 @@
 	if (!b->legacy_io)
 		goto kzalloc_err;
 
+	sysfs_bin_attr_init(b->legacy_io);
 	b->legacy_io->attr.name = "legacy_io";
 	b->legacy_io->size = 0xffff;
 	b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
@@ -654,6 +655,7 @@
 		goto legacy_io_err;
 
 	/* Allocated above after the legacy_io struct */
+	sysfs_bin_attr_init(b->legacy_mem);
 	b->legacy_mem = b->legacy_io + 1;
 	b->legacy_mem->attr.name = "legacy_mem";
 	b->legacy_mem->size = 1024*1024;
@@ -800,6 +802,7 @@
 	if (res_attr) {
 		char *res_attr_name = (char *)(res_attr + 1);
 
+		sysfs_bin_attr_init(res_attr);
 		if (write_combine) {
 			pdev->res_attr_wc[num] = res_attr;
 			sprintf(res_attr_name, "resource%d_wc", num);
@@ -972,6 +975,7 @@
 		if (!attr)
 			return -ENOMEM;
 
+		sysfs_bin_attr_init(attr);
 		attr->size = dev->vpd->len;
 		attr->attr.name = "vpd";
 		attr->attr.mode = S_IRUSR | S_IWUSR;
@@ -1038,6 +1042,7 @@
 			retval = -ENOMEM;
 			goto err_resource_files;
 		}
+		sysfs_bin_attr_init(attr);
 		attr->size = rom_size;
 		attr->attr.name = "rom";
 		attr->attr.mode = S_IRUSR;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 77b493b..cb1dd5f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1583,8 +1583,10 @@
 	int pm;
 	u16 pmc;
 
+	pm_runtime_forbid(&dev->dev);
 	device_enable_async_suspend(&dev->dev);
 	dev->wakeup_prepared = false;
+
 	dev->pm_cap = 0;
 
 	/* find PCI PM capability in list */
@@ -2296,35 +2298,6 @@
 	}
 }
 
-#ifndef HAVE_ARCH_PCI_SET_DMA_MASK
-/*
- * These can be overridden by arch-specific implementations
- */
-int
-pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (!pci_dma_supported(dev, mask))
-		return -EIO;
-
-	dev->dma_mask = mask;
-	dev_dbg(&dev->dev, "using %dbit DMA mask\n", fls64(mask));
-
-	return 0;
-}
-    
-int
-pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (!pci_dma_supported(dev, mask))
-		return -EIO;
-
-	dev->dev.coherent_dma_mask = mask;
-	dev_dbg(&dev->dev, "using %dbit consistent DMA mask\n", fls64(mask));
-
-	return 0;
-}
-#endif
-
 #ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
 int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
 {
@@ -2486,7 +2459,7 @@
 	if (!probe) {
 		pci_block_user_cfg_access(dev);
 		/* block PM suspend, driver probe, etc. */
-		down(&dev->dev.sem);
+		device_lock(&dev->dev);
 	}
 
 	rc = pci_dev_specific_reset(dev, probe);
@@ -2508,7 +2481,7 @@
 	rc = pci_parent_bus_reset(dev, probe);
 done:
 	if (!probe) {
-		up(&dev->dev.sem);
+		device_unlock(&dev->dev);
 		pci_unblock_user_cfg_access(dev);
 	}
 
@@ -3066,8 +3039,6 @@
 EXPORT_SYMBOL(pci_try_set_mwi);
 EXPORT_SYMBOL(pci_clear_mwi);
 EXPORT_SYMBOL_GPL(pci_intx);
-EXPORT_SYMBOL(pci_set_dma_mask);
-EXPORT_SYMBOL(pci_set_consistent_dma_mask);
 EXPORT_SYMBOL(pci_assign_resource);
 EXPORT_SYMBOL(pci_find_parent_resource);
 EXPORT_SYMBOL(pci_select_bars);
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 49c9e6c..f75a44d 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -29,7 +29,7 @@
 	return attribute->store ? attribute->store(slot, buf, len) : -EIO;
 }
 
-static struct sysfs_ops pci_slot_sysfs_ops = {
+static const struct sysfs_ops pci_slot_sysfs_ops = {
 	.show = pci_slot_attr_show,
 	.store = pci_slot_attr_store,
 };
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 0f98be4..ad93ebd 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -971,9 +971,9 @@
 {
 	int rc;
 
-	down(&dev->sem);
+	device_lock(dev);
 	rc = pcmcia_dev_suspend(dev, PMSG_SUSPEND);
-	up(&dev->sem);
+	device_unlock(dev);
 	return rc;
 }
 
@@ -981,9 +981,9 @@
 {
 	int rc;
 
-	down(&dev->sem);
+	device_lock(dev);
 	rc = pcmcia_dev_resume(dev);
-	up(&dev->sem);
+	device_unlock(dev);
 	return rc;
 }
 
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index de6bc33..db79ca6 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -21,11 +21,18 @@
 
 #include "sa1111_generic.h"
 
+#define IDX_IRQ_S0_READY_NINT	(0)
+#define IDX_IRQ_S0_CD_VALID	(1)
+#define IDX_IRQ_S0_BVD1_STSCHG	(2)
+#define IDX_IRQ_S1_READY_NINT	(3)
+#define IDX_IRQ_S1_CD_VALID	(4)
+#define IDX_IRQ_S1_BVD1_STSCHG	(5)
+
 static struct pcmcia_irqs irqs[] = {
-	{ 0, IRQ_S0_CD_VALID,    "SA1111 PCMCIA card detect" },
-	{ 0, IRQ_S0_BVD1_STSCHG, "SA1111 PCMCIA BVD1"        },
-	{ 1, IRQ_S1_CD_VALID,    "SA1111 CF card detect"     },
-	{ 1, IRQ_S1_BVD1_STSCHG, "SA1111 CF BVD1"            },
+	{ 0, NO_IRQ, "SA1111 PCMCIA card detect" },
+	{ 0, NO_IRQ, "SA1111 PCMCIA BVD1"        },
+	{ 1, NO_IRQ, "SA1111 CF card detect"     },
+	{ 1, NO_IRQ, "SA1111 CF BVD1"            },
 };
 
 static int sa1111_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
@@ -136,7 +143,9 @@
 		s->soc.ops = ops;
 		s->soc.socket.owner = ops->owner;
 		s->soc.socket.dev.parent = &dev->dev;
-		s->soc.socket.pci_irq = s->soc.nr ? IRQ_S1_READY_NINT : IRQ_S0_READY_NINT;
+		s->soc.socket.pci_irq = s->soc.nr ?
+				dev->irq[IDX_IRQ_S0_READY_NINT] :
+				dev->irq[IDX_IRQ_S1_READY_NINT];
 		s->dev = dev;
 
 		ret = add(&s->soc);
@@ -162,6 +171,12 @@
 
 	base = dev->mapbase;
 
+	/* Initialize PCMCIA IRQs */
+	irqs[0].irq = dev->irq[IDX_IRQ_S0_CD_VALID];
+	irqs[1].irq = dev->irq[IDX_IRQ_S0_BVD1_STSCHG];
+	irqs[2].irq = dev->irq[IDX_IRQ_S1_CD_VALID];
+	irqs[3].irq = dev->irq[IDX_IRQ_S1_BVD1_STSCHG];
+
 	/*
 	 * Initialise the suspend state.
 	 */
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index cd2ee6f..e631dbe 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -150,6 +150,7 @@
 	tristate "MSI Laptop Extras"
 	depends on ACPI
 	depends on BACKLIGHT_CLASS_DEVICE
+	depends on RFKILL
 	---help---
 	  This is a driver for laptops built by MSI (MICRO-STAR
 	  INTERNATIONAL):
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 1b1dddb..bed764e 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -142,7 +142,7 @@
 
 static struct input_dev *dell_wmi_input_dev;
 
-static struct key_entry *dell_wmi_get_entry_by_scancode(int code)
+static struct key_entry *dell_wmi_get_entry_by_scancode(unsigned int code)
 {
 	struct key_entry *key;
 
@@ -153,7 +153,7 @@
 	return NULL;
 }
 
-static struct key_entry *dell_wmi_get_entry_by_keycode(int keycode)
+static struct key_entry *dell_wmi_get_entry_by_keycode(unsigned int keycode)
 {
 	struct key_entry *key;
 
@@ -164,8 +164,8 @@
 	return NULL;
 }
 
-static int dell_wmi_getkeycode(struct input_dev *dev, int scancode,
-			       int *keycode)
+static int dell_wmi_getkeycode(struct input_dev *dev,
+				unsigned int scancode, unsigned int *keycode)
 {
 	struct key_entry *key = dell_wmi_get_entry_by_scancode(scancode);
 
@@ -177,13 +177,11 @@
 	return -EINVAL;
 }
 
-static int dell_wmi_setkeycode(struct input_dev *dev, int scancode, int keycode)
+static int dell_wmi_setkeycode(struct input_dev *dev,
+				unsigned int scancode, unsigned int keycode)
 {
 	struct key_entry *key;
-	int old_keycode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
+	unsigned int old_keycode;
 
 	key = dell_wmi_get_entry_by_scancode(scancode);
 	if (key && key->type == KE_KEY) {
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 3aa57da..5608636 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -57,7 +57,7 @@
 	HPWMI_WWAN = 2,
 };
 
-static int __init hp_wmi_bios_setup(struct platform_device *device);
+static int __devinit hp_wmi_bios_setup(struct platform_device *device);
 static int __exit hp_wmi_bios_remove(struct platform_device *device);
 static int hp_wmi_resume_handler(struct device *device);
 
@@ -278,7 +278,7 @@
 static DEVICE_ATTR(dock, S_IRUGO, show_dock, NULL);
 static DEVICE_ATTR(tablet, S_IRUGO, show_tablet, NULL);
 
-static struct key_entry *hp_wmi_get_entry_by_scancode(int code)
+static struct key_entry *hp_wmi_get_entry_by_scancode(unsigned int code)
 {
 	struct key_entry *key;
 
@@ -289,7 +289,7 @@
 	return NULL;
 }
 
-static struct key_entry *hp_wmi_get_entry_by_keycode(int keycode)
+static struct key_entry *hp_wmi_get_entry_by_keycode(unsigned int keycode)
 {
 	struct key_entry *key;
 
@@ -300,7 +300,8 @@
 	return NULL;
 }
 
-static int hp_wmi_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+static int hp_wmi_getkeycode(struct input_dev *dev,
+			     unsigned int scancode, unsigned int *keycode)
 {
 	struct key_entry *key = hp_wmi_get_entry_by_scancode(scancode);
 
@@ -312,13 +313,11 @@
 	return -EINVAL;
 }
 
-static int hp_wmi_setkeycode(struct input_dev *dev, int scancode, int keycode)
+static int hp_wmi_setkeycode(struct input_dev *dev,
+			     unsigned int scancode, unsigned int keycode)
 {
 	struct key_entry *key;
-	int old_keycode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
+	unsigned int old_keycode;
 
 	key = hp_wmi_get_entry_by_scancode(scancode);
 	if (key && key->type == KE_KEY) {
@@ -447,7 +446,7 @@
 	device_remove_file(&device->dev, &dev_attr_tablet);
 }
 
-static int __init hp_wmi_bios_setup(struct platform_device *device)
+static int __devinit hp_wmi_bios_setup(struct platform_device *device)
 {
 	int err;
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c
index 759763d..c2b05da 100644
--- a/drivers/platform/x86/msi-laptop.c
+++ b/drivers/platform/x86/msi-laptop.c
@@ -58,6 +58,7 @@
 #include <linux/dmi.h>
 #include <linux/backlight.h>
 #include <linux/platform_device.h>
+#include <linux/rfkill.h>
 
 #define MSI_DRIVER_VERSION "0.5"
 
@@ -66,6 +67,20 @@
 #define MSI_EC_COMMAND_WIRELESS 0x10
 #define MSI_EC_COMMAND_LCD_LEVEL 0x11
 
+#define MSI_STANDARD_EC_COMMAND_ADDRESS	0x2e
+#define MSI_STANDARD_EC_BLUETOOTH_MASK	(1 << 0)
+#define MSI_STANDARD_EC_WEBCAM_MASK	(1 << 1)
+#define MSI_STANDARD_EC_WLAN_MASK	(1 << 3)
+#define MSI_STANDARD_EC_3G_MASK		(1 << 4)
+
+/* For set SCM load flag to disable BIOS fn key */
+#define MSI_STANDARD_EC_SCM_LOAD_ADDRESS	0x2d
+#define MSI_STANDARD_EC_SCM_LOAD_MASK		(1 << 0)
+
+static int msi_laptop_resume(struct platform_device *device);
+
+#define MSI_STANDARD_EC_DEVICES_EXISTS_ADDRESS	0x2f
+
 static int force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
@@ -74,6 +89,23 @@
 module_param(auto_brightness, int, 0);
 MODULE_PARM_DESC(auto_brightness, "Enable automatic brightness control (0: disabled; 1: enabled; 2: don't touch)");
 
+static bool old_ec_model;
+static int wlan_s, bluetooth_s, threeg_s;
+static int threeg_exists;
+
+/* Some MSI 3G netbook only have one fn key to control Wlan/Bluetooth/3G,
+ * those netbook will load the SCM (windows app) to disable the original
+ * Wlan/Bluetooth control by BIOS when user press fn key, then control
+ * Wlan/Bluetooth/3G by SCM (software control by OS). Without SCM, user
+ * cann't on/off 3G module on those 3G netbook.
+ * On Linux, msi-laptop driver will do the same thing to disable the
+ * original BIOS control, then might need use HAL or other userland
+ * application to do the software control that simulate with SCM.
+ * e.g. MSI N034 netbook
+ */
+static bool load_scm_model;
+static struct rfkill *rfk_wlan, *rfk_bluetooth, *rfk_threeg;
+
 /* Hardware access */
 
 static int set_lcd_level(int level)
@@ -130,6 +162,35 @@
 	return ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, wdata, 2, NULL, 0, 1);
 }
 
+static ssize_t set_device_state(const char *buf, size_t count, u8 mask)
+{
+	int status;
+	u8 wdata = 0, rdata;
+	int result;
+
+	if (sscanf(buf, "%i", &status) != 1 || (status < 0 || status > 1))
+		return -EINVAL;
+
+	/* read current device state */
+	result = ec_read(MSI_STANDARD_EC_COMMAND_ADDRESS, &rdata);
+	if (result < 0)
+		return -EINVAL;
+
+	if (!!(rdata & mask) != status) {
+		/* reverse device bit */
+		if (rdata & mask)
+			wdata = rdata & ~mask;
+		else
+			wdata = rdata | mask;
+
+		result = ec_write(MSI_STANDARD_EC_COMMAND_ADDRESS, wdata);
+		if (result < 0)
+			return -EINVAL;
+	}
+
+	return count;
+}
+
 static int get_wireless_state(int *wlan, int *bluetooth)
 {
 	u8 wdata = 0, rdata;
@@ -148,6 +209,38 @@
 	return 0;
 }
 
+static int get_wireless_state_ec_standard(void)
+{
+	u8 rdata;
+	int result;
+
+	result = ec_read(MSI_STANDARD_EC_COMMAND_ADDRESS, &rdata);
+	if (result < 0)
+		return -1;
+
+	wlan_s = !!(rdata & MSI_STANDARD_EC_WLAN_MASK);
+
+	bluetooth_s = !!(rdata & MSI_STANDARD_EC_BLUETOOTH_MASK);
+
+	threeg_s = !!(rdata & MSI_STANDARD_EC_3G_MASK);
+
+	return 0;
+}
+
+static int get_threeg_exists(void)
+{
+	u8 rdata;
+	int result;
+
+	result = ec_read(MSI_STANDARD_EC_DEVICES_EXISTS_ADDRESS, &rdata);
+	if (result < 0)
+		return -1;
+
+	threeg_exists = !!(rdata & MSI_STANDARD_EC_3G_MASK);
+
+	return 0;
+}
+
 /* Backlight device stuff */
 
 static int bl_get_brightness(struct backlight_device *b)
@@ -176,26 +269,71 @@
 
 	int ret, enabled;
 
-	ret = get_wireless_state(&enabled, NULL);
+	if (old_ec_model) {
+		ret = get_wireless_state(&enabled, NULL);
+	} else {
+		ret = get_wireless_state_ec_standard();
+		enabled = wlan_s;
+	}
 	if (ret < 0)
 		return ret;
 
 	return sprintf(buf, "%i\n", enabled);
 }
 
+static ssize_t store_wlan(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	return set_device_state(buf, count, MSI_STANDARD_EC_WLAN_MASK);
+}
+
 static ssize_t show_bluetooth(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
 
 	int ret, enabled;
 
-	ret = get_wireless_state(NULL, &enabled);
+	if (old_ec_model) {
+		ret = get_wireless_state(NULL, &enabled);
+	} else {
+		ret = get_wireless_state_ec_standard();
+		enabled = bluetooth_s;
+	}
 	if (ret < 0)
 		return ret;
 
 	return sprintf(buf, "%i\n", enabled);
 }
 
+static ssize_t store_bluetooth(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	return set_device_state(buf, count, MSI_STANDARD_EC_BLUETOOTH_MASK);
+}
+
+static ssize_t show_threeg(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+
+	int ret;
+
+	/* old msi ec not support 3G */
+	if (old_ec_model)
+		return -1;
+
+	ret = get_wireless_state_ec_standard();
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%i\n", threeg_s);
+}
+
+static ssize_t store_threeg(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	return set_device_state(buf, count, MSI_STANDARD_EC_3G_MASK);
+}
+
 static ssize_t show_lcd_level(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
@@ -258,6 +396,7 @@
 static DEVICE_ATTR(auto_brightness, 0644, show_auto_brightness, store_auto_brightness);
 static DEVICE_ATTR(bluetooth, 0444, show_bluetooth, NULL);
 static DEVICE_ATTR(wlan, 0444, show_wlan, NULL);
+static DEVICE_ATTR(threeg, 0444, show_threeg, NULL);
 
 static struct attribute *msipf_attributes[] = {
 	&dev_attr_lcd_level.attr,
@@ -275,7 +414,8 @@
 	.driver = {
 		.name = "msi-laptop-pf",
 		.owner = THIS_MODULE,
-	}
+	},
+	.resume = msi_laptop_resume,
 };
 
 static struct platform_device *msipf_device;
@@ -332,6 +472,192 @@
 	{ }
 };
 
+static struct dmi_system_id __initdata msi_load_scm_models_dmi_table[] = {
+	{
+		.ident = "MSI N034",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR,
+				"MICRO-STAR INTERNATIONAL CO., LTD"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MS-N034"),
+			DMI_MATCH(DMI_CHASSIS_VENDOR,
+			"MICRO-STAR INTERNATIONAL CO., LTD")
+		},
+		.callback = dmi_check_cb
+	},
+	{ }
+};
+
+static int rfkill_bluetooth_set(void *data, bool blocked)
+{
+	/* Do something with blocked...*/
+	/*
+	 * blocked == false is on
+	 * blocked == true is off
+	 */
+	if (blocked)
+		set_device_state("0", 0, MSI_STANDARD_EC_BLUETOOTH_MASK);
+	else
+		set_device_state("1", 0, MSI_STANDARD_EC_BLUETOOTH_MASK);
+
+	return 0;
+}
+
+static int rfkill_wlan_set(void *data, bool blocked)
+{
+	if (blocked)
+		set_device_state("0", 0, MSI_STANDARD_EC_WLAN_MASK);
+	else
+		set_device_state("1", 0, MSI_STANDARD_EC_WLAN_MASK);
+
+	return 0;
+}
+
+static int rfkill_threeg_set(void *data, bool blocked)
+{
+	if (blocked)
+		set_device_state("0", 0, MSI_STANDARD_EC_3G_MASK);
+	else
+		set_device_state("1", 0, MSI_STANDARD_EC_3G_MASK);
+
+	return 0;
+}
+
+static struct rfkill_ops rfkill_bluetooth_ops = {
+	.set_block = rfkill_bluetooth_set
+};
+
+static struct rfkill_ops rfkill_wlan_ops = {
+	.set_block = rfkill_wlan_set
+};
+
+static struct rfkill_ops rfkill_threeg_ops = {
+	.set_block = rfkill_threeg_set
+};
+
+static void rfkill_cleanup(void)
+{
+	if (rfk_bluetooth) {
+		rfkill_unregister(rfk_bluetooth);
+		rfkill_destroy(rfk_bluetooth);
+	}
+
+	if (rfk_threeg) {
+		rfkill_unregister(rfk_threeg);
+		rfkill_destroy(rfk_threeg);
+	}
+
+	if (rfk_wlan) {
+		rfkill_unregister(rfk_wlan);
+		rfkill_destroy(rfk_wlan);
+	}
+}
+
+static int rfkill_init(struct platform_device *sdev)
+{
+	/* add rfkill */
+	int retval;
+
+	rfk_bluetooth = rfkill_alloc("msi-bluetooth", &sdev->dev,
+				RFKILL_TYPE_BLUETOOTH,
+				&rfkill_bluetooth_ops, NULL);
+	if (!rfk_bluetooth) {
+		retval = -ENOMEM;
+		goto err_bluetooth;
+	}
+	retval = rfkill_register(rfk_bluetooth);
+	if (retval)
+		goto err_bluetooth;
+
+	rfk_wlan = rfkill_alloc("msi-wlan", &sdev->dev, RFKILL_TYPE_WLAN,
+				&rfkill_wlan_ops, NULL);
+	if (!rfk_wlan) {
+		retval = -ENOMEM;
+		goto err_wlan;
+	}
+	retval = rfkill_register(rfk_wlan);
+	if (retval)
+		goto err_wlan;
+
+	if (threeg_exists) {
+		rfk_threeg = rfkill_alloc("msi-threeg", &sdev->dev,
+				RFKILL_TYPE_WWAN, &rfkill_threeg_ops, NULL);
+		if (!rfk_threeg) {
+			retval = -ENOMEM;
+			goto err_threeg;
+		}
+		retval = rfkill_register(rfk_threeg);
+		if (retval)
+			goto err_threeg;
+	}
+
+	return 0;
+
+err_threeg:
+	rfkill_destroy(rfk_threeg);
+	if (rfk_wlan)
+		rfkill_unregister(rfk_wlan);
+err_wlan:
+	rfkill_destroy(rfk_wlan);
+	if (rfk_bluetooth)
+		rfkill_unregister(rfk_bluetooth);
+err_bluetooth:
+	rfkill_destroy(rfk_bluetooth);
+
+	return retval;
+}
+
+static int msi_laptop_resume(struct platform_device *device)
+{
+	u8 data;
+	int result;
+
+	if (!load_scm_model)
+		return 0;
+
+	/* set load SCM to disable hardware control by fn key */
+	result = ec_read(MSI_STANDARD_EC_SCM_LOAD_ADDRESS, &data);
+	if (result < 0)
+		return result;
+
+	result = ec_write(MSI_STANDARD_EC_SCM_LOAD_ADDRESS,
+		data | MSI_STANDARD_EC_SCM_LOAD_MASK);
+	if (result < 0)
+		return result;
+
+	return 0;
+}
+
+static int load_scm_model_init(struct platform_device *sdev)
+{
+	u8 data;
+	int result;
+
+	/* allow userland write sysfs file  */
+	dev_attr_bluetooth.store = store_bluetooth;
+	dev_attr_wlan.store = store_wlan;
+	dev_attr_threeg.store = store_threeg;
+	dev_attr_bluetooth.attr.mode |= S_IWUSR;
+	dev_attr_wlan.attr.mode |= S_IWUSR;
+	dev_attr_threeg.attr.mode |= S_IWUSR;
+
+	/* disable hardware control by fn key */
+	result = ec_read(MSI_STANDARD_EC_SCM_LOAD_ADDRESS, &data);
+	if (result < 0)
+		return result;
+
+	result = ec_write(MSI_STANDARD_EC_SCM_LOAD_ADDRESS,
+		data | MSI_STANDARD_EC_SCM_LOAD_MASK);
+	if (result < 0)
+		return result;
+
+	/* initial rfkill */
+	result = rfkill_init(sdev);
+	if (result < 0)
+		return result;
+
+	return 0;
+}
+
 static int __init msi_init(void)
 {
 	int ret;
@@ -339,8 +665,14 @@
 	if (acpi_disabled)
 		return -ENODEV;
 
-	if (!force && !dmi_check_system(msi_dmi_table))
-		return -ENODEV;
+	if (force || dmi_check_system(msi_dmi_table))
+		old_ec_model = 1;
+
+	if (!old_ec_model)
+		get_threeg_exists();
+
+	if (!old_ec_model && dmi_check_system(msi_load_scm_models_dmi_table))
+		load_scm_model = 1;
 
 	if (auto_brightness < 0 || auto_brightness > 2)
 		return -EINVAL;
@@ -374,10 +706,23 @@
 	if (ret)
 		goto fail_platform_device1;
 
+	if (load_scm_model && (load_scm_model_init(msipf_device) < 0)) {
+		ret = -EINVAL;
+		goto fail_platform_device1;
+	}
+
 	ret = sysfs_create_group(&msipf_device->dev.kobj, &msipf_attribute_group);
 	if (ret)
 		goto fail_platform_device2;
 
+	if (!old_ec_model) {
+		if (threeg_exists)
+			ret = device_create_file(&msipf_device->dev,
+						&dev_attr_threeg);
+		if (ret)
+			goto fail_platform_device2;
+	}
+
 	/* Disable automatic brightness control by default because
 	 * this module was probably loaded to do brightness control in
 	 * software. */
@@ -412,10 +757,14 @@
 {
 
 	sysfs_remove_group(&msipf_device->dev.kobj, &msipf_attribute_group);
+	if (!old_ec_model && threeg_exists)
+		device_remove_file(&msipf_device->dev, &dev_attr_threeg);
 	platform_device_unregister(msipf_device);
 	platform_driver_unregister(&msipf_driver);
 	backlight_device_unregister(msibl_device);
 
+	rfkill_cleanup();
+
 	/* Enable automatic brightness control again */
 	if (auto_brightness != 2)
 		set_auto_brightness(1);
@@ -435,3 +784,4 @@
 MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1058:pvr0581:rvnMSI:rnMS-1058:*:ct10:*");
 MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1412:*:rvnMSI:rnMS-1412:*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
 MODULE_ALIAS("dmi:*:svnNOTEBOOK:pnSAM2000:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
+MODULE_ALIAS("dmi:*:svnMICRO-STARINTERNATIONAL*:pnMS-N034:*");
diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c
index fe7cf01..c9fc479f 100644
--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -200,7 +200,7 @@
 };
 
 #define KEYMAP_SIZE		11
-static const int initial_keymap[KEYMAP_SIZE] = {
+static const unsigned int initial_keymap[KEYMAP_SIZE] = {
 	/*  0 */ KEY_RESERVED,
 	/*  1 */ KEY_BRIGHTNESSDOWN,
 	/*  2 */ KEY_BRIGHTNESSUP,
@@ -222,7 +222,7 @@
 	struct acpi_device	*device;
 	struct input_dev	*input_dev;
 	struct backlight_device	*backlight;
-	int			keymap[KEYMAP_SIZE];
+	unsigned int		keymap[KEYMAP_SIZE];
 };
 
 struct pcc_keyinput {
@@ -445,7 +445,8 @@
 
 /* hotkey input device driver */
 
-static int pcc_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+static int pcc_getkeycode(struct input_dev *dev,
+			  unsigned int scancode, unsigned int *keycode)
 {
 	struct pcc_acpi *pcc = input_get_drvdata(dev);
 
@@ -457,7 +458,7 @@
 	return 0;
 }
 
-static int keymap_get_by_keycode(struct pcc_acpi *pcc, int keycode)
+static int keymap_get_by_keycode(struct pcc_acpi *pcc, unsigned int keycode)
 {
 	int i;
 
@@ -469,7 +470,8 @@
 	return 0;
 }
 
-static int pcc_setkeycode(struct input_dev *dev, int scancode, int keycode)
+static int pcc_setkeycode(struct input_dev *dev,
+			  unsigned int scancode, unsigned int keycode)
 {
 	struct pcc_acpi *pcc = input_get_drvdata(dev);
 	int oldkeycode;
@@ -477,9 +479,6 @@
 	if (scancode >= ARRAY_SIZE(pcc->keymap))
 		return -EINVAL;
 
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
-
 	oldkeycode = pcc->keymap[scancode];
 	pcc->keymap[scancode] = keycode;
 
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 3f71a60..5a3d851 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -145,7 +145,7 @@
 	struct input_dev	*key_dev;
 	struct kfifo		fifo;
 	spinlock_t		fifo_lock;
-	struct workqueue_struct	*wq;
+	struct timer_list	release_key_timer;
 };
 
 static struct sony_laptop_input_s sony_laptop_input = {
@@ -299,20 +299,26 @@
 };
 
 /* release buttons after a short delay if pressed */
-static void do_sony_laptop_release_key(struct work_struct *work)
+static void do_sony_laptop_release_key(unsigned long unused)
 {
 	struct sony_laptop_keypress kp;
+	unsigned long flags;
 
-	while (kfifo_out_locked(&sony_laptop_input.fifo, (unsigned char *)&kp,
-			sizeof(kp), &sony_laptop_input.fifo_lock)
-			== sizeof(kp)) {
-		msleep(10);
+	spin_lock_irqsave(&sony_laptop_input.fifo_lock, flags);
+
+	if (kfifo_out(&sony_laptop_input.fifo,
+		      (unsigned char *)&kp, sizeof(kp)) == sizeof(kp)) {
 		input_report_key(kp.dev, kp.key, 0);
 		input_sync(kp.dev);
 	}
+
+	/* If there is something in the fifo schedule next release. */
+	if (kfifo_len(&sony_laptop_input.fifo) != 0)
+		mod_timer(&sony_laptop_input.release_key_timer,
+			  jiffies + msecs_to_jiffies(10));
+
+	spin_unlock_irqrestore(&sony_laptop_input.fifo_lock, flags);
 }
-static DECLARE_WORK(sony_laptop_release_key_work,
-		do_sony_laptop_release_key);
 
 /* forward event to the input subsystem */
 static void sony_laptop_report_input_event(u8 event)
@@ -366,13 +372,13 @@
 		/* we emit the scancode so we can always remap the key */
 		input_event(kp.dev, EV_MSC, MSC_SCAN, event);
 		input_sync(kp.dev);
-		kfifo_in_locked(&sony_laptop_input.fifo,
-			  (unsigned char *)&kp, sizeof(kp),
-			  &sony_laptop_input.fifo_lock);
 
-		if (!work_pending(&sony_laptop_release_key_work))
-			queue_work(sony_laptop_input.wq,
-					&sony_laptop_release_key_work);
+		/* schedule key release */
+		kfifo_in_locked(&sony_laptop_input.fifo,
+				(unsigned char *)&kp, sizeof(kp),
+				&sony_laptop_input.fifo_lock);
+		mod_timer(&sony_laptop_input.release_key_timer,
+			  jiffies + msecs_to_jiffies(10));
 	} else
 		dprintk("unknown input event %.2x\n", event);
 }
@@ -390,27 +396,21 @@
 
 	/* kfifo */
 	spin_lock_init(&sony_laptop_input.fifo_lock);
-	error =
-	 kfifo_alloc(&sony_laptop_input.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL);
+	error = kfifo_alloc(&sony_laptop_input.fifo,
+			    SONY_LAPTOP_BUF_SIZE, GFP_KERNEL);
 	if (error) {
 		printk(KERN_ERR DRV_PFX "kfifo_alloc failed\n");
 		goto err_dec_users;
 	}
 
-	/* init workqueue */
-	sony_laptop_input.wq = create_singlethread_workqueue("sony-laptop");
-	if (!sony_laptop_input.wq) {
-		printk(KERN_ERR DRV_PFX
-				"Unable to create workqueue.\n");
-		error = -ENXIO;
-		goto err_free_kfifo;
-	}
+	setup_timer(&sony_laptop_input.release_key_timer,
+		    do_sony_laptop_release_key, 0);
 
 	/* input keys */
 	key_dev = input_allocate_device();
 	if (!key_dev) {
 		error = -ENOMEM;
-		goto err_destroy_wq;
+		goto err_free_kfifo;
 	}
 
 	key_dev->name = "Sony Vaio Keys";
@@ -419,18 +419,15 @@
 	key_dev->dev.parent = &acpi_device->dev;
 
 	/* Initialize the Input Drivers: special keys */
-	set_bit(EV_KEY, key_dev->evbit);
-	set_bit(EV_MSC, key_dev->evbit);
-	set_bit(MSC_SCAN, key_dev->mscbit);
+	input_set_capability(key_dev, EV_MSC, MSC_SCAN);
+
+	__set_bit(EV_KEY, key_dev->evbit);
 	key_dev->keycodesize = sizeof(sony_laptop_input_keycode_map[0]);
 	key_dev->keycodemax = ARRAY_SIZE(sony_laptop_input_keycode_map);
 	key_dev->keycode = &sony_laptop_input_keycode_map;
-	for (i = 0; i < ARRAY_SIZE(sony_laptop_input_keycode_map); i++) {
-		if (sony_laptop_input_keycode_map[i] != KEY_RESERVED) {
-			set_bit(sony_laptop_input_keycode_map[i],
-				key_dev->keybit);
-		}
-	}
+	for (i = 0; i < ARRAY_SIZE(sony_laptop_input_keycode_map); i++)
+		__set_bit(sony_laptop_input_keycode_map[i], key_dev->keybit);
+	__clear_bit(KEY_RESERVED, key_dev->keybit);
 
 	error = input_register_device(key_dev);
 	if (error)
@@ -450,9 +447,8 @@
 	jog_dev->id.vendor = PCI_VENDOR_ID_SONY;
 	key_dev->dev.parent = &acpi_device->dev;
 
-	jog_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
-	jog_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_MIDDLE);
-	jog_dev->relbit[0] = BIT_MASK(REL_WHEEL);
+	input_set_capability(jog_dev, EV_KEY, BTN_MIDDLE);
+	input_set_capability(jog_dev, EV_REL, REL_WHEEL);
 
 	error = input_register_device(jog_dev);
 	if (error)
@@ -473,9 +469,6 @@
 err_free_keydev:
 	input_free_device(key_dev);
 
-err_destroy_wq:
-	destroy_workqueue(sony_laptop_input.wq);
-
 err_free_kfifo:
 	kfifo_free(&sony_laptop_input.fifo);
 
@@ -486,12 +479,23 @@
 
 static void sony_laptop_remove_input(void)
 {
-	/* cleanup only after the last user has gone */
+	struct sony_laptop_keypress kp = { NULL };
+
+	/* Cleanup only after the last user has gone */
 	if (!atomic_dec_and_test(&sony_laptop_input.users))
 		return;
 
-	/* flush workqueue first */
-	flush_workqueue(sony_laptop_input.wq);
+	del_timer_sync(&sony_laptop_input.release_key_timer);
+
+	/*
+	 * Generate key-up events for remaining keys. Note that we don't
+	 * need locking since nobody is adding new events to the kfifo.
+	 */
+	while (kfifo_out(&sony_laptop_input.fifo,
+			 (unsigned char *)&kp, sizeof(kp)) == sizeof(kp)) {
+		input_report_key(kp.dev, kp.key, 0);
+		input_sync(kp.dev);
+	}
 
 	/* destroy input devs */
 	input_unregister_device(sony_laptop_input.key_dev);
@@ -502,7 +506,6 @@
 		sony_laptop_input.jog_dev = NULL;
 	}
 
-	destroy_workqueue(sony_laptop_input.wq);
 	kfifo_free(&sony_laptop_input.fifo);
 }
 
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index e7b0c3b..c64e352 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1668,7 +1668,7 @@
  * Table of recommended minimum BIOS versions
  *
  * Reasons for listing:
- *    1. Stable BIOS, listed because the unknown ammount of
+ *    1. Stable BIOS, listed because the unknown amount of
  *       bugs and bad ACPI behaviour on older versions
  *
  *    2. BIOS or EC fw with known bugs that trigger on Linux
@@ -7108,7 +7108,7 @@
  *
  * 	Fan speed changes of any sort (including those caused by the
  * 	disengaged mode) are usually done slowly by the firmware as the
- * 	maximum ammount of fan duty cycle change per second seems to be
+ * 	maximum amount of fan duty cycle change per second seems to be
  * 	limited.
  *
  * 	Reading is not available if GFAN exists.
diff --git a/drivers/platform/x86/topstar-laptop.c b/drivers/platform/x86/topstar-laptop.c
index 02f3d4e..4d6516f 100644
--- a/drivers/platform/x86/topstar-laptop.c
+++ b/drivers/platform/x86/topstar-laptop.c
@@ -46,7 +46,7 @@
 	{ }
 };
 
-static struct tps_key_entry *tps_get_key_by_scancode(int code)
+static struct tps_key_entry *tps_get_key_by_scancode(unsigned int code)
 {
 	struct tps_key_entry *key;
 
@@ -57,7 +57,7 @@
 	return NULL;
 }
 
-static struct tps_key_entry *tps_get_key_by_keycode(int code)
+static struct tps_key_entry *tps_get_key_by_keycode(unsigned int code)
 {
 	struct tps_key_entry *key;
 
@@ -126,7 +126,8 @@
 	return 0;
 }
 
-static int topstar_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+static int topstar_getkeycode(struct input_dev *dev,
+				unsigned int scancode, unsigned int *keycode)
 {
 	struct tps_key_entry *key = tps_get_key_by_scancode(scancode);
 
@@ -137,14 +138,12 @@
 	return 0;
 }
 
-static int topstar_setkeycode(struct input_dev *dev, int scancode, int keycode)
+static int topstar_setkeycode(struct input_dev *dev,
+				unsigned int scancode, unsigned int keycode)
 {
 	struct tps_key_entry *key;
 	int old_keycode;
 
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
-
 	key = tps_get_key_by_scancode(scancode);
 
 	if (!key)
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 405b969..789240d 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -745,7 +745,7 @@
         .update_status  = set_lcd_status,
 };
 
-static struct key_entry *toshiba_acpi_get_entry_by_scancode(int code)
+static struct key_entry *toshiba_acpi_get_entry_by_scancode(unsigned int code)
 {
 	struct key_entry *key;
 
@@ -756,7 +756,7 @@
 	return NULL;
 }
 
-static struct key_entry *toshiba_acpi_get_entry_by_keycode(int code)
+static struct key_entry *toshiba_acpi_get_entry_by_keycode(unsigned int code)
 {
 	struct key_entry *key;
 
@@ -767,8 +767,8 @@
 	return NULL;
 }
 
-static int toshiba_acpi_getkeycode(struct input_dev *dev, int scancode,
-				   int *keycode)
+static int toshiba_acpi_getkeycode(struct input_dev *dev,
+				   unsigned int scancode, unsigned int *keycode)
 {
 	struct key_entry *key = toshiba_acpi_get_entry_by_scancode(scancode);
 
@@ -780,14 +780,11 @@
 	return -EINVAL;
 }
 
-static int toshiba_acpi_setkeycode(struct input_dev *dev, int scancode,
-				   int keycode)
+static int toshiba_acpi_setkeycode(struct input_dev *dev,
+				   unsigned int scancode, unsigned int keycode)
 {
 	struct key_entry *key;
-	int old_keycode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
+	unsigned int old_keycode;
 
 	key = toshiba_acpi_get_entry_by_scancode(scancode);
 	if (key && key->type == KE_KEY) {
diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h
index 0b8d140..0bab84e 100644
--- a/drivers/pnp/base.h
+++ b/drivers/pnp/base.h
@@ -166,6 +166,9 @@
 struct pnp_resource *pnp_add_mem_resource(struct pnp_dev *dev,
 					  resource_size_t start,
 					  resource_size_t end, int flags);
+struct pnp_resource *pnp_add_bus_resource(struct pnp_dev *dev,
+					  resource_size_t start,
+					  resource_size_t end);
 
 extern int pnp_debug;
 
diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c
index 68b0c04..cfaf5b7 100644
--- a/drivers/pnp/interface.c
+++ b/drivers/pnp/interface.c
@@ -278,9 +278,12 @@
 		switch (pnp_resource_type(res)) {
 		case IORESOURCE_IO:
 		case IORESOURCE_MEM:
-			pnp_printf(buffer, " %#llx-%#llx\n",
+		case IORESOURCE_BUS:
+			pnp_printf(buffer, " %#llx-%#llx%s\n",
 				   (unsigned long long) res->start,
-				   (unsigned long long) res->end);
+				   (unsigned long long) res->end,
+				   res->flags & IORESOURCE_WINDOW ?
+					" window" : "");
 			break;
 		case IORESOURCE_IRQ:
 		case IORESOURCE_DMA:
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 5702b2c..54514aa3 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -177,7 +177,8 @@
 }
 
 static void pnpacpi_parse_allocated_ioresource(struct pnp_dev *dev, u64 start,
-					       u64 len, int io_decode)
+					       u64 len, int io_decode,
+					       int window)
 {
 	int flags = 0;
 	u64 end = start + len - 1;
@@ -186,6 +187,8 @@
 		flags |= IORESOURCE_IO_16BIT_ADDR;
 	if (len == 0 || end >= 0x10003)
 		flags |= IORESOURCE_DISABLED;
+	if (window)
+		flags |= IORESOURCE_WINDOW;
 
 	pnp_add_io_resource(dev, start, end, flags);
 }
@@ -247,7 +250,7 @@
 
 static void pnpacpi_parse_allocated_memresource(struct pnp_dev *dev,
 						u64 start, u64 len,
-						int write_protect)
+						int write_protect, int window)
 {
 	int flags = 0;
 	u64 end = start + len - 1;
@@ -256,15 +259,26 @@
 		flags |= IORESOURCE_DISABLED;
 	if (write_protect == ACPI_READ_WRITE_MEMORY)
 		flags |= IORESOURCE_MEM_WRITEABLE;
+	if (window)
+		flags |= IORESOURCE_WINDOW;
 
 	pnp_add_mem_resource(dev, start, end, flags);
 }
 
+static void pnpacpi_parse_allocated_busresource(struct pnp_dev *dev,
+						u64 start, u64 len)
+{
+	u64 end = start + len - 1;
+
+	pnp_add_bus_resource(dev, start, end);
+}
+
 static void pnpacpi_parse_allocated_address_space(struct pnp_dev *dev,
 						  struct acpi_resource *res)
 {
 	struct acpi_resource_address64 addr, *p = &addr;
 	acpi_status status;
+	int window;
 
 	status = acpi_resource_to_address64(res, p);
 	if (!ACPI_SUCCESS(status)) {
@@ -273,37 +287,42 @@
 		return;
 	}
 
-	if (p->producer_consumer == ACPI_PRODUCER)
-		return;
+	window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
 
 	if (p->resource_type == ACPI_MEMORY_RANGE)
 		pnpacpi_parse_allocated_memresource(dev,
 			p->minimum, p->address_length,
-			p->info.mem.write_protect);
+			p->info.mem.write_protect, window);
 	else if (p->resource_type == ACPI_IO_RANGE)
 		pnpacpi_parse_allocated_ioresource(dev,
 			p->minimum, p->address_length,
 			p->granularity == 0xfff ? ACPI_DECODE_10 :
-				ACPI_DECODE_16);
+				ACPI_DECODE_16, window);
+	else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
+		pnpacpi_parse_allocated_busresource(dev, p->minimum,
+						    p->address_length);
 }
 
 static void pnpacpi_parse_allocated_ext_address_space(struct pnp_dev *dev,
 						      struct acpi_resource *res)
 {
 	struct acpi_resource_extended_address64 *p = &res->data.ext_address64;
+	int window;
 
-	if (p->producer_consumer == ACPI_PRODUCER)
-		return;
+	window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
 
 	if (p->resource_type == ACPI_MEMORY_RANGE)
 		pnpacpi_parse_allocated_memresource(dev,
 			p->minimum, p->address_length,
-			p->info.mem.write_protect);
+			p->info.mem.write_protect, window);
 	else if (p->resource_type == ACPI_IO_RANGE)
 		pnpacpi_parse_allocated_ioresource(dev,
 			p->minimum, p->address_length,
 			p->granularity == 0xfff ? ACPI_DECODE_10 :
-				ACPI_DECODE_16);
+				ACPI_DECODE_16, window);
+	else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
+		pnpacpi_parse_allocated_busresource(dev, p->minimum,
+						    p->address_length);
 }
 
 static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
@@ -368,7 +387,7 @@
 		pnpacpi_parse_allocated_ioresource(dev,
 			io->minimum,
 			io->address_length,
-			io->io_decode);
+			io->io_decode, 0);
 		break;
 
 	case ACPI_RESOURCE_TYPE_START_DEPENDENT:
@@ -380,7 +399,7 @@
 		pnpacpi_parse_allocated_ioresource(dev,
 			fixed_io->address,
 			fixed_io->address_length,
-			ACPI_DECODE_10);
+			ACPI_DECODE_10, 0);
 		break;
 
 	case ACPI_RESOURCE_TYPE_VENDOR:
@@ -396,21 +415,21 @@
 		pnpacpi_parse_allocated_memresource(dev,
 			memory24->minimum,
 			memory24->address_length,
-			memory24->write_protect);
+			memory24->write_protect, 0);
 		break;
 	case ACPI_RESOURCE_TYPE_MEMORY32:
 		memory32 = &res->data.memory32;
 		pnpacpi_parse_allocated_memresource(dev,
 			memory32->minimum,
 			memory32->address_length,
-			memory32->write_protect);
+			memory32->write_protect, 0);
 		break;
 	case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
 		fixed_memory32 = &res->data.fixed_memory32;
 		pnpacpi_parse_allocated_memresource(dev,
 			fixed_memory32->address,
 			fixed_memory32->address_length,
-			fixed_memory32->write_protect);
+			fixed_memory32->write_protect, 0);
 		break;
 	case ACPI_RESOURCE_TYPE_ADDRESS16:
 	case ACPI_RESOURCE_TYPE_ADDRESS32:
diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c
index 64d0596..5b277db 100644
--- a/drivers/pnp/resource.c
+++ b/drivers/pnp/resource.c
@@ -470,7 +470,8 @@
 unsigned long pnp_resource_type(struct resource *res)
 {
 	return res->flags & (IORESOURCE_IO  | IORESOURCE_MEM |
-			     IORESOURCE_IRQ | IORESOURCE_DMA);
+			     IORESOURCE_IRQ | IORESOURCE_DMA |
+			     IORESOURCE_BUS);
 }
 
 struct resource *pnp_get_resource(struct pnp_dev *dev,
@@ -590,6 +591,30 @@
 	return pnp_res;
 }
 
+struct pnp_resource *pnp_add_bus_resource(struct pnp_dev *dev,
+					  resource_size_t start,
+					  resource_size_t end)
+{
+	struct pnp_resource *pnp_res;
+	struct resource *res;
+
+	pnp_res = pnp_new_resource(dev);
+	if (!pnp_res) {
+		dev_err(&dev->dev, "can't add resource for BUS %#llx-%#llx\n",
+			(unsigned long long) start,
+			(unsigned long long) end);
+		return NULL;
+	}
+
+	res = &pnp_res->res;
+	res->flags = IORESOURCE_BUS;
+	res->start = start;
+	res->end = end;
+
+	pnp_dbg(&dev->dev, "  add %pr\n", res);
+	return pnp_res;
+}
+
 /*
  * Determine whether the specified resource is a possible configuration
  * for this device.
diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c
index 9585c1c..f5beb24 100644
--- a/drivers/pnp/support.c
+++ b/drivers/pnp/support.c
@@ -69,8 +69,10 @@
 		return "irq";
 	case IORESOURCE_DMA:
 		return "dma";
+	case IORESOURCE_BUS:
+		return "bus";
 	}
-	return NULL;
+	return "unknown";
 }
 
 void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc)
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index c790e0c..ff05e61 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -99,6 +99,7 @@
 	POWER_SUPPLY_ATTR(present),
 	POWER_SUPPLY_ATTR(online),
 	POWER_SUPPLY_ATTR(technology),
+	POWER_SUPPLY_ATTR(cycle_count),
 	POWER_SUPPLY_ATTR(voltage_max),
 	POWER_SUPPLY_ATTR(voltage_min),
 	POWER_SUPPLY_ATTR(voltage_max_design),
diff --git a/drivers/pps/Kconfig b/drivers/pps/Kconfig
index cc2eb8e..1afe4e0 100644
--- a/drivers/pps/Kconfig
+++ b/drivers/pps/Kconfig
@@ -30,4 +30,6 @@
 	  messages to the system log.  Select this if you are having a
 	  problem with PPS support and want to see more of what is going on.
 
+source drivers/pps/clients/Kconfig
+
 endmenu
diff --git a/drivers/pps/Makefile b/drivers/pps/Makefile
index 19ea582..98960dd 100644
--- a/drivers/pps/Makefile
+++ b/drivers/pps/Makefile
@@ -4,5 +4,6 @@
 
 pps_core-y			:= pps.o kapi.o sysfs.o
 obj-$(CONFIG_PPS)		:= pps_core.o
+obj-y				+= clients/
 
 ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG
diff --git a/drivers/pps/clients/Kconfig b/drivers/pps/clients/Kconfig
new file mode 100644
index 0000000..4e801bd7
--- /dev/null
+++ b/drivers/pps/clients/Kconfig
@@ -0,0 +1,25 @@
+#
+# PPS clients configuration
+#
+
+if PPS
+
+comment "PPS clients support"
+
+config PPS_CLIENT_KTIMER
+	tristate "Kernel timer client (Testing client, use for debug)"
+	help
+	  If you say yes here you get support for a PPS debugging client
+	  which uses a kernel timer to generate the PPS signal.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called pps-ktimer.
+
+config PPS_CLIENT_LDISC
+	tristate "PPS line discipline"
+	depends on PPS
+	help
+	  If you say yes here you get support for a PPS source connected
+	  with the CD (Carrier Detect) pin of your serial port.
+
+endif
diff --git a/drivers/pps/clients/Makefile b/drivers/pps/clients/Makefile
new file mode 100644
index 0000000..812c9b1
--- /dev/null
+++ b/drivers/pps/clients/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for PPS clients.
+#
+
+obj-$(CONFIG_PPS_CLIENT_KTIMER)	+= pps-ktimer.o
+obj-$(CONFIG_PPS_CLIENT_LDISC)	+= pps-ldisc.o
+
+ifeq ($(CONFIG_PPS_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/pps/clients/pps-ktimer.c b/drivers/pps/clients/pps-ktimer.c
new file mode 100644
index 0000000..e7ef5b8
--- /dev/null
+++ b/drivers/pps/clients/pps-ktimer.c
@@ -0,0 +1,123 @@
+/*
+ * pps-ktimer.c -- kernel timer test client
+ *
+ *
+ * Copyright (C) 2005-2006   Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/pps_kernel.h>
+
+/*
+ * Global variables
+ */
+
+static int source;
+static struct timer_list ktimer;
+
+/*
+ * The kernel timer
+ */
+
+static void pps_ktimer_event(unsigned long ptr)
+{
+	struct timespec __ts;
+	struct pps_ktime ts;
+
+	/* First of all we get the time stamp... */
+	getnstimeofday(&__ts);
+
+	pr_info("PPS event at %lu\n", jiffies);
+
+	/* ... and translate it to PPS time data struct */
+	ts.sec = __ts.tv_sec;
+	ts.nsec = __ts.tv_nsec;
+
+	pps_event(source, &ts, PPS_CAPTUREASSERT, NULL);
+
+	mod_timer(&ktimer, jiffies + HZ);
+}
+
+/*
+ * The echo function
+ */
+
+static void pps_ktimer_echo(int source, int event, void *data)
+{
+	pr_info("echo %s %s for source %d\n",
+		event & PPS_CAPTUREASSERT ? "assert" : "",
+		event & PPS_CAPTURECLEAR ? "clear" : "",
+		source);
+}
+
+/*
+ * The PPS info struct
+ */
+
+static struct pps_source_info pps_ktimer_info = {
+	.name		= "ktimer",
+	.path		= "",
+	.mode		= PPS_CAPTUREASSERT | PPS_OFFSETASSERT |
+			  PPS_ECHOASSERT |
+			  PPS_CANWAIT | PPS_TSFMT_TSPEC,
+	.echo		= pps_ktimer_echo,
+	.owner		= THIS_MODULE,
+};
+
+/*
+ * Module staff
+ */
+
+static void __exit pps_ktimer_exit(void)
+{
+	del_timer_sync(&ktimer);
+	pps_unregister_source(source);
+
+	pr_info("ktimer PPS source unregistered\n");
+}
+
+static int __init pps_ktimer_init(void)
+{
+	int ret;
+
+	ret = pps_register_source(&pps_ktimer_info,
+				PPS_CAPTUREASSERT | PPS_OFFSETASSERT);
+	if (ret < 0) {
+		printk(KERN_ERR "cannot register ktimer source\n");
+		return ret;
+	}
+	source = ret;
+
+	setup_timer(&ktimer, pps_ktimer_event, 0);
+	mod_timer(&ktimer, jiffies + HZ);
+
+	pr_info("ktimer PPS source registered at %d\n", source);
+
+	return  0;
+}
+
+module_init(pps_ktimer_init);
+module_exit(pps_ktimer_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("dummy PPS source by using a kernel timer (just for debug)");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pps/clients/pps-ldisc.c b/drivers/pps/clients/pps-ldisc.c
new file mode 100644
index 0000000..8e1932d
--- /dev/null
+++ b/drivers/pps/clients/pps-ldisc.c
@@ -0,0 +1,154 @@
+/*
+ * pps-ldisc.c -- PPS line discipline
+ *
+ *
+ * Copyright (C) 2008	Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/pps_kernel.h>
+
+#define PPS_TTY_MAGIC		0x0001
+
+static void pps_tty_dcd_change(struct tty_struct *tty, unsigned int status,
+				struct timespec *ts)
+{
+	int id = (long)tty->disc_data;
+	struct timespec __ts;
+	struct pps_ktime pps_ts;
+
+	/* First of all we get the time stamp... */
+	getnstimeofday(&__ts);
+
+	/* Does caller give us a timestamp? */
+	if (ts) {	/* Yes. Let's use it! */
+		pps_ts.sec = ts->tv_sec;
+		pps_ts.nsec = ts->tv_nsec;
+	} else {	/* No. Do it ourself! */
+		pps_ts.sec = __ts.tv_sec;
+		pps_ts.nsec = __ts.tv_nsec;
+	}
+
+	/* Now do the PPS event report */
+	pps_event(id, &pps_ts, status ? PPS_CAPTUREASSERT : PPS_CAPTURECLEAR,
+			NULL);
+
+	pr_debug("PPS %s at %lu on source #%d\n",
+			status ? "assert" : "clear", jiffies, id);
+}
+
+static int (*alias_n_tty_open)(struct tty_struct *tty);
+
+static int pps_tty_open(struct tty_struct *tty)
+{
+	struct pps_source_info info;
+	struct tty_driver *drv = tty->driver;
+	int index = tty->index + drv->name_base;
+	int ret;
+
+	info.owner = THIS_MODULE;
+	info.dev = NULL;
+	snprintf(info.name, PPS_MAX_NAME_LEN, "%s%d", drv->driver_name, index);
+	snprintf(info.path, PPS_MAX_NAME_LEN, "/dev/%s%d", drv->name, index);
+	info.mode = PPS_CAPTUREBOTH | \
+			PPS_OFFSETASSERT | PPS_OFFSETCLEAR | \
+			PPS_CANWAIT | PPS_TSFMT_TSPEC;
+
+	ret = pps_register_source(&info, PPS_CAPTUREBOTH | \
+				PPS_OFFSETASSERT | PPS_OFFSETCLEAR);
+	if (ret < 0) {
+		pr_err("cannot register PPS source \"%s\"\n", info.path);
+		return ret;
+	}
+	tty->disc_data = (void *)(long)ret;
+
+	/* Should open N_TTY ldisc too */
+	ret = alias_n_tty_open(tty);
+	if (ret < 0)
+		pps_unregister_source((long)tty->disc_data);
+
+	pr_info("PPS source #%d \"%s\" added\n", ret, info.path);
+
+	return 0;
+}
+
+static void (*alias_n_tty_close)(struct tty_struct *tty);
+
+static void pps_tty_close(struct tty_struct *tty)
+{
+	int id = (long)tty->disc_data;
+
+	pps_unregister_source(id);
+	alias_n_tty_close(tty);
+
+	pr_info("PPS source #%d removed\n", id);
+}
+
+static struct tty_ldisc_ops pps_ldisc_ops;
+
+/*
+ * Module stuff
+ */
+
+static int __init pps_tty_init(void)
+{
+	int err;
+
+	/* Inherit the N_TTY's ops */
+	n_tty_inherit_ops(&pps_ldisc_ops);
+
+	/* Save N_TTY's open()/close() methods */
+	alias_n_tty_open = pps_ldisc_ops.open;
+	alias_n_tty_close = pps_ldisc_ops.close;
+
+	/* Init PPS_TTY data */
+	pps_ldisc_ops.owner = THIS_MODULE;
+	pps_ldisc_ops.magic = PPS_TTY_MAGIC;
+	pps_ldisc_ops.name = "pps_tty";
+	pps_ldisc_ops.dcd_change = pps_tty_dcd_change;
+	pps_ldisc_ops.open = pps_tty_open;
+	pps_ldisc_ops.close = pps_tty_close;
+
+	err = tty_register_ldisc(N_PPS, &pps_ldisc_ops);
+	if (err)
+		pr_err("can't register PPS line discipline\n");
+	else
+		pr_info("PPS line discipline registered\n");
+
+	return err;
+}
+
+static void __exit pps_tty_cleanup(void)
+{
+	int err;
+
+	err = tty_unregister_ldisc(N_PPS);
+	if (err)
+		pr_err("can't unregister PPS line discipline\n");
+	else
+		pr_info("PPS line discipline removed\n");
+}
+
+module_init(pps_tty_init);
+module_exit(pps_tty_cleanup);
+
+MODULE_ALIAS_LDISC(N_PPS);
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("PPS TTY device driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/hctosys.c b/drivers/rtc/hctosys.c
index 33c0e98..bc90b09 100644
--- a/drivers/rtc/hctosys.c
+++ b/drivers/rtc/hctosys.c
@@ -22,48 +22,57 @@
  * the best guess is to add 0.5s.
  */
 
+int rtc_hctosys_ret = -ENODEV;
+
 static int __init rtc_hctosys(void)
 {
-	int err;
+	int err = -ENODEV;
 	struct rtc_time tm;
+	struct timespec tv = {
+		.tv_nsec = NSEC_PER_SEC >> 1,
+	};
 	struct rtc_device *rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
 
 	if (rtc == NULL) {
-		printk("%s: unable to open rtc device (%s)\n",
+		pr_err("%s: unable to open rtc device (%s)\n",
 			__FILE__, CONFIG_RTC_HCTOSYS_DEVICE);
-		return -ENODEV;
+		goto err_open;
 	}
 
 	err = rtc_read_time(rtc, &tm);
-	if (err == 0) {
-		err = rtc_valid_tm(&tm);
-		if (err == 0) {
-			struct timespec tv;
-
-			tv.tv_nsec = NSEC_PER_SEC >> 1;
-
-			rtc_tm_to_time(&tm, &tv.tv_sec);
-
-			do_settimeofday(&tv);
-
-			dev_info(rtc->dev.parent,
-				"setting system clock to "
-				"%d-%02d-%02d %02d:%02d:%02d UTC (%u)\n",
-				tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
-				tm.tm_hour, tm.tm_min, tm.tm_sec,
-				(unsigned int) tv.tv_sec);
-		}
-		else
-			dev_err(rtc->dev.parent,
-				"hctosys: invalid date/time\n");
-	}
-	else
+	if (err) {
 		dev_err(rtc->dev.parent,
 			"hctosys: unable to read the hardware clock\n");
+		goto err_read;
 
+	}
+
+	err = rtc_valid_tm(&tm);
+	if (err) {
+		dev_err(rtc->dev.parent,
+			"hctosys: invalid date/time\n");
+		goto err_invalid;
+	}
+
+	rtc_tm_to_time(&tm, &tv.tv_sec);
+
+	do_settimeofday(&tv);
+
+	dev_info(rtc->dev.parent,
+		"setting system clock to "
+		"%d-%02d-%02d %02d:%02d:%02d UTC (%u)\n",
+		tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
+		tm.tm_hour, tm.tm_min, tm.tm_sec,
+		(unsigned int) tv.tv_sec);
+
+err_invalid:
+err_read:
 	rtc_class_close(rtc);
 
-	return 0;
+err_open:
+	rtc_hctosys_ret = err;
+
+	return err;
 }
 
 late_initcall(rtc_hctosys);
diff --git a/drivers/rtc/rtc-ds1742.c b/drivers/rtc/rtc-ds1742.c
index a127336..cad9ceb 100644
--- a/drivers/rtc/rtc-ds1742.c
+++ b/drivers/rtc/rtc-ds1742.c
@@ -184,6 +184,7 @@
 	pdata->size_nvram = pdata->size - RTC_SIZE;
 	pdata->ioaddr_rtc = ioaddr + pdata->size_nvram;
 
+	sysfs_bin_attr_init(&pdata->nvram_attr);
 	pdata->nvram_attr.attr.name = "nvram";
 	pdata->nvram_attr.attr.mode = S_IRUGO | S_IWUSR;
 	pdata->nvram_attr.read = ds1742_nvram_read;
diff --git a/drivers/rtc/rtc-sysfs.c b/drivers/rtc/rtc-sysfs.c
index 7dd23a6f..380083c 100644
--- a/drivers/rtc/rtc-sysfs.c
+++ b/drivers/rtc/rtc-sysfs.c
@@ -107,8 +107,9 @@
 		char *buf)
 {
 #ifdef CONFIG_RTC_HCTOSYS_DEVICE
-	if (strcmp(dev_name(&to_rtc_device(dev)->dev),
-		   CONFIG_RTC_HCTOSYS_DEVICE) == 0)
+	if (rtc_hctosys_ret == 0 &&
+			strcmp(dev_name(&to_rtc_device(dev)->dev),
+				CONFIG_RTC_HCTOSYS_DEVICE) == 0)
 		return sprintf(buf, "1\n");
 	else
 #endif
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 4951aa8..bbea90ba 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -26,6 +26,7 @@
 #include <asm/ebcdic.h>
 #include <asm/idals.h>
 #include <asm/itcw.h>
+#include <asm/diag.h>
 
 /* This is ugly... */
 #define PRINTK_HEADER "dasd:"
@@ -2212,6 +2213,13 @@
 		goto out;
 	}
 
+	if ((mode & FMODE_WRITE) &&
+	    (test_bit(DASD_FLAG_DEVICE_RO, &base->flags) ||
+	     (base->features & DASD_FEATURE_READONLY))) {
+		rc = -EROFS;
+		goto out;
+	}
+
 	return 0;
 
 out:
@@ -2289,6 +2297,34 @@
  * SECTION: common functions for ccw_driver use
  */
 
+/*
+ * Is the device read-only?
+ * Note that this function does not report the setting of the
+ * readonly device attribute, but how it is configured in z/VM.
+ */
+int dasd_device_is_ro(struct dasd_device *device)
+{
+	struct ccw_dev_id dev_id;
+	struct diag210 diag_data;
+	int rc;
+
+	if (!MACHINE_IS_VM)
+		return 0;
+	ccw_device_get_id(device->cdev, &dev_id);
+	memset(&diag_data, 0, sizeof(diag_data));
+	diag_data.vrdcdvno = dev_id.devno;
+	diag_data.vrdclen = sizeof(diag_data);
+	rc = diag210(&diag_data);
+	if (rc == 0 || rc == 2) {
+		return diag_data.vrdcvfla & 0x80;
+	} else {
+		DBF_EVENT(DBF_WARNING, "diag210 failed for dev=%04x with rc=%d",
+			  dev_id.devno, rc);
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(dasd_device_is_ro);
+
 static void dasd_generic_auto_online(void *data, async_cookie_t cookie)
 {
 	struct ccw_device *cdev = data;
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index 44796ba..51224f7 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -1045,6 +1045,10 @@
 
 		erp->retries = 5;
 
+	} else if (sense[1] & SNS1_WRITE_INHIBITED) {
+		dev_err(&device->cdev->dev, "An I/O request was rejected"
+			" because writing is inhibited\n");
+		erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
 	} else {
 		/* fatal error -  set status to FAILED
 		   internal error 09 - Command Reject */
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index d49766f..8e23919 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -742,6 +742,7 @@
 	      const char *buf, size_t count)
 {
 	struct dasd_devmap *devmap;
+	struct dasd_device *device;
 	int val;
 	char *endp;
 
@@ -758,12 +759,14 @@
 		devmap->features |= DASD_FEATURE_READONLY;
 	else
 		devmap->features &= ~DASD_FEATURE_READONLY;
-	if (devmap->device)
-		devmap->device->features = devmap->features;
-	if (devmap->device && devmap->device->block
-	    && devmap->device->block->gdp)
-		set_disk_ro(devmap->device->block->gdp, val);
+	device = devmap->device;
+	if (device) {
+		device->features = devmap->features;
+		val = val || test_bit(DASD_FLAG_DEVICE_RO, &device->flags);
+	}
 	spin_unlock(&dasd_devmap_lock);
+	if (device && device->block && device->block->gdp)
+		set_disk_ro(device->block->gdp, val);
 	return count;
 }
 
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index 6e14863..687f323 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -145,12 +145,10 @@
 	mdsk_term_io(device);
 	rc = mdsk_init_io(device, device->block->bp_block, 0, NULL);
 	if (rc == 4) {
-		if (!(device->features & DASD_FEATURE_READONLY)) {
+		if (!(test_and_set_bit(DASD_FLAG_DEVICE_RO, &device->flags)))
 			pr_warning("%s: The access mode of a DIAG device "
 				   "changed to read-only\n",
 				   dev_name(&device->cdev->dev));
-			device->features |= DASD_FEATURE_READONLY;
-		}
 		rc = 0;
 	}
 	if (rc)
@@ -449,7 +447,7 @@
 		rc = -EIO;
 	} else {
 		if (rc == 4)
-			device->features |= DASD_FEATURE_READONLY;
+			set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
 		pr_info("%s: New DASD with %ld byte/block, total size %ld "
 			"KB%s\n", dev_name(&device->cdev->dev),
 			(unsigned long) block->bp_block,
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 1cca21a..01f4e7a 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1089,6 +1089,7 @@
 	struct dasd_eckd_private *private;
 	struct dasd_block *block;
 	int is_known, rc;
+	int readonly;
 
 	if (!ccw_device_is_pathgroup(device->cdev)) {
 		dev_warn(&device->cdev->dev,
@@ -1182,15 +1183,20 @@
 	else
 		private->real_cyl = private->rdc_data.no_cyl;
 
+	readonly = dasd_device_is_ro(device);
+	if (readonly)
+		set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
+
 	dev_info(&device->cdev->dev, "New DASD %04X/%02X (CU %04X/%02X) "
-		 "with %d cylinders, %d heads, %d sectors\n",
+		 "with %d cylinders, %d heads, %d sectors%s\n",
 		 private->rdc_data.dev_type,
 		 private->rdc_data.dev_model,
 		 private->rdc_data.cu_type,
 		 private->rdc_data.cu_model.model,
 		 private->real_cyl,
 		 private->rdc_data.trk_per_cyl,
-		 private->rdc_data.sec_per_trk);
+		 private->rdc_data.sec_per_trk,
+		 readonly ? ", read-only device" : "");
 	return 0;
 
 out_err3:
@@ -2839,8 +2845,13 @@
 	char *psf_data, *rssd_result;
 	struct dasd_ccw_req *cqr;
 	struct ccw1 *ccw;
+	char psf0, psf1;
 	int rc;
 
+	if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO))
+		return -EACCES;
+	psf0 = psf1 = 0;
+
 	/* Copy parms from caller */
 	rc = -EFAULT;
 	if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
@@ -2869,12 +2880,8 @@
 			   (void __user *)(unsigned long) usrparm.psf_data,
 			   usrparm.psf_data_len))
 		goto out_free;
-
-	/* sanity check on syscall header */
-	if (psf_data[0] != 0x17 && psf_data[1] != 0xce) {
-		rc = -EINVAL;
-		goto out_free;
-	}
+	psf0 = psf_data[0];
+	psf1 = psf_data[1];
 
 	/* setup CCWs for PSF + RSSD */
 	cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 2 , 0, device);
@@ -2925,7 +2932,9 @@
 	kfree(rssd_result);
 	kfree(psf_data);
 out:
-	DBF_DEV_EVENT(DBF_WARNING, device, "Symmetrix ioctl: rc=%d", rc);
+	DBF_DEV_EVENT(DBF_WARNING, device,
+		      "Symmetrix ioctl (0x%02x 0x%02x): rc=%d",
+		      (int) psf0, (int) psf1, rc);
 	return rc;
 }
 
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index 0f15244..37282b9 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -124,6 +124,7 @@
 	struct dasd_fba_private *private;
 	struct ccw_device *cdev = device->cdev;
 	int rc;
+	int readonly;
 
 	private = (struct dasd_fba_private *) device->private;
 	if (!private) {
@@ -162,16 +163,21 @@
 		return rc;
 	}
 
+	readonly = dasd_device_is_ro(device);
+	if (readonly)
+		set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
+
 	dev_info(&device->cdev->dev,
 		 "New FBA DASD %04X/%02X (CU %04X/%02X) with %d MB "
-		 "and %d B/blk\n",
+		 "and %d B/blk%s\n",
 		 cdev->id.dev_type,
 		 cdev->id.dev_model,
 		 cdev->id.cu_type,
 		 cdev->id.cu_model,
 		 ((private->rdc_data.blk_bdsa *
 		   (private->rdc_data.blk_size >> 9)) >> 11),
-		 private->rdc_data.blk_size);
+		 private->rdc_data.blk_size,
+		 readonly ? ", read-only device" : "");
 	return 0;
 }
 
diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c
index 94f92a1..30a1ca3 100644
--- a/drivers/s390/block/dasd_genhd.c
+++ b/drivers/s390/block/dasd_genhd.c
@@ -70,7 +70,8 @@
 	}
 	len += sprintf(gdp->disk_name + len, "%c", 'a'+(base->devindex%26));
 
-	if (block->base->features & DASD_FEATURE_READONLY)
+	if (base->features & DASD_FEATURE_READONLY ||
+	    test_bit(DASD_FLAG_DEVICE_RO, &base->flags))
 		set_disk_ro(gdp, 1);
 	gdp->private_data = block;
 	gdp->queue = block->request_queue;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index ed73ce5..a91d4a9 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -436,6 +436,10 @@
 #define DASD_FLAG_OFFLINE	3	/* device is in offline processing */
 #define DASD_FLAG_EER_SNSS	4	/* A SNSS is required */
 #define DASD_FLAG_EER_IN_USE	5	/* A SNSS request is running */
+#define DASD_FLAG_DEVICE_RO	6	/* The device itself is read-only. Don't
+					 * confuse this with the user specified
+					 * read-only feature.
+					 */
 
 void dasd_put_device_wake(struct dasd_device *);
 
@@ -609,6 +613,9 @@
 void dasd_device_set_stop_bits(struct dasd_device *, int);
 void dasd_device_remove_stop_bits(struct dasd_device *, int);
 
+int dasd_device_is_ro(struct dasd_device *);
+
+
 /* externals in dasd_devmap.c */
 extern int dasd_max_devindex;
 extern int dasd_probeonly;
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 7039d9c..3479f81 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -199,7 +199,8 @@
 	if (!argp)
 		return -EINVAL;
 
-	if (block->base->features & DASD_FEATURE_READONLY)
+	if (block->base->features & DASD_FEATURE_READONLY ||
+	    test_bit(DASD_FLAG_DEVICE_RO, &block->base->flags))
 		return -EROFS;
 	if (copy_from_user(&fdata, argp, sizeof(struct format_data_t)))
 		return -EFAULT;
@@ -349,7 +350,8 @@
 		return -EINVAL;
 	if (get_user(intval, (int __user *)argp))
 		return -EFAULT;
-
+	if (!intval && test_bit(DASD_FLAG_DEVICE_RO, &block->base->flags))
+		return -EROFS;
 	set_disk_ro(bdev->bd_disk, intval);
 	return dasd_set_feature(block->base->cdev, DASD_FEATURE_READONLY, intval);
 }
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 62ddf52..2a4c566 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -373,7 +373,7 @@
 		rq->rc = ccw_device_start(rp->cdev, &rq->ccw,
 					  (unsigned long) rq, 0, 0);
 		if (rq->rc == 0)
-			return;	/* Sucessfully restarted. */
+			return;	/* Successfully restarted. */
 		break;
 	case RAW3270_IO_STOP:
 		if (!rq)
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index ec88c59..f6d72e1 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -196,7 +196,7 @@
 	req->start_count++;
 
 	if (rc == 0) {
-		/* Sucessfully started request */
+		/* Successfully started request */
 		req->status = SCLP_REQ_RUNNING;
 		sclp_running_state = sclp_running_state_running;
 		__sclp_set_request_timer(SCLP_RETRY_INTERVAL * HZ,
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index c6abb75..6d229f3 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -764,7 +764,7 @@
 static void io_subchannel_register(struct ccw_device *cdev)
 {
 	struct subchannel *sch;
-	int ret;
+	int ret, adjust_init_count = 1;
 	unsigned long flags;
 
 	sch = to_subchannel(cdev->dev.parent);
@@ -793,6 +793,7 @@
 					      cdev->private->dev_id.ssid,
 					      cdev->private->dev_id.devno);
 		}
+		adjust_init_count = 0;
 		goto out;
 	}
 	/*
@@ -818,7 +819,7 @@
 	cdev->private->flags.recog_done = 1;
 	wake_up(&cdev->private->wait_q);
 out_err:
-	if (atomic_dec_and_test(&ccw_device_init_count))
+	if (adjust_init_count && atomic_dec_and_test(&ccw_device_init_count))
 		wake_up(&ccw_device_init_wq);
 }
 
diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c
index c94eb2a..6ce83f5 100644
--- a/drivers/s390/cio/qdio_debug.c
+++ b/drivers/s390/cio/qdio_debug.c
@@ -33,7 +33,6 @@
 	DBF_HEX(&init_data->input_handler, sizeof(void *));
 	DBF_HEX(&init_data->output_handler, sizeof(void *));
 	DBF_HEX(&init_data->int_parm, sizeof(long));
-	DBF_HEX(&init_data->flags, sizeof(long));
 	DBF_HEX(&init_data->input_sbal_addr_array, sizeof(void *));
 	DBF_HEX(&init_data->output_sbal_addr_array, sizeof(void *));
 	DBF_EVENT("irq:%8lx", (unsigned long)irq_ptr);
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 232ef04..4f8f743 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -588,10 +588,11 @@
 	if (q->is_input_q) {
 		qperf_inc(q, inbound_handler);
 		DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "kih s:%02x c:%02x", start, count);
-	} else
+	} else {
 		qperf_inc(q, outbound_handler);
 		DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "koh: s:%02x c:%02x",
 			      start, count);
+	}
 
 	q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, start, count,
 		   q->irq_ptr->int_parm);
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index cb909a5..977bb4d 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -43,6 +43,16 @@
 	  Select this option if you want to be able to receive SMSG messages
 	  from other VM guest systems.
 
+config SMSGIUCV_EVENT
+	tristate "Deliver IUCV special messages as uevents (VM only)"
+	depends on SMSGIUCV
+	help
+	  Select this option to deliver CP special messages (SMSGs) as
+	  uevents.  The driver handles only those special messages that
+	  start with "APP".
+
+	  To compile as a module, choose M. The module name is "smsgiucv_app".
+
 config CLAW
 	tristate "CLAW device support"
 	depends on CCW && NETDEVICES
diff --git a/drivers/s390/net/Makefile b/drivers/s390/net/Makefile
index 6cab5a6..4dfe8c1 100644
--- a/drivers/s390/net/Makefile
+++ b/drivers/s390/net/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_CTCM) += ctcm.o fsm.o
 obj-$(CONFIG_NETIUCV) += netiucv.o fsm.o
 obj-$(CONFIG_SMSGIUCV) += smsgiucv.o
+obj-$(CONFIG_SMSGIUCV_EVENT) += smsgiucv_app.o
 obj-$(CONFIG_LCS) += lcs.o
 obj-$(CONFIG_CLAW) += claw.o
 qeth-y += qeth_core_sys.o qeth_core_main.o qeth_core_mpc.o
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index a3ac445..fcd005a 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -763,7 +763,8 @@
 
 static inline int qeth_get_ip_version(struct sk_buff *skb)
 {
-	switch (skb->protocol) {
+	struct ethhdr *ehdr = (struct ethhdr *)skb->data;
+	switch (ehdr->h_proto) {
 	case ETH_P_IPV6:
 		return 6;
 	case ETH_P_IP:
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index fa8a519..3bd4206 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -537,7 +537,8 @@
 			dev_err(&card->gdev->dev,
 				"The qeth device is not configured "
 				"for the OSI layer required by z/VM\n");
-		qeth_schedule_recovery(card);
+		else
+			qeth_schedule_recovery(card);
 		goto out;
 	}
 
@@ -1113,8 +1114,6 @@
 	card->ipato.enabled = 0;
 	card->ipato.invert4 = 0;
 	card->ipato.invert6 = 0;
-	if (card->info.type == QETH_CARD_TYPE_IQD)
-		card->options.checksum_type = NO_CHECKSUMMING;
 	/* init QDIO stuff */
 	qeth_init_qdio_info(card);
 	return 0;
@@ -3805,9 +3804,6 @@
 	init_data.input_handler          = card->discipline.input_handler;
 	init_data.output_handler         = card->discipline.output_handler;
 	init_data.int_parm               = (unsigned long) card;
-	init_data.flags                  = QDIO_INBOUND_0COPY_SBALS |
-					   QDIO_OUTBOUND_0COPY_SBALS |
-					   QDIO_USE_OUTBOUND_PCIS;
 	init_data.input_sbal_addr_array  = (void **) in_sbal_ptrs;
 	init_data.output_sbal_addr_array = (void **) out_sbal_ptrs;
 
diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c
index 88ae435..25dfd5a 100644
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -8,6 +8,9 @@
  *		 Frank Blaschka <frank.blaschka@de.ibm.com>
  */
 
+#define KMSG_COMPONENT "qeth"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/list.h>
 #include <linux/rwsem.h>
 #include <asm/ebcdic.h>
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 51fde6f..6f1e303 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -1071,11 +1071,9 @@
 		dev_info(&card->gdev->dev,
 			"Device successfully recovered!\n");
 	else {
-		if (card->dev) {
-			rtnl_lock();
-			dev_close(card->dev);
-			rtnl_unlock();
-		}
+		rtnl_lock();
+		dev_close(card->dev);
+		rtnl_unlock();
 		dev_warn(&card->gdev->dev, "The qeth device driver "
 			"failed to recover an error on the device\n");
 	}
@@ -1129,11 +1127,9 @@
 	if (card->state == CARD_STATE_RECOVER) {
 		rc = __qeth_l2_set_online(card->gdev, 1);
 		if (rc) {
-			if (card->dev) {
-				rtnl_lock();
-				dev_close(card->dev);
-				rtnl_unlock();
-			}
+			rtnl_lock();
+			dev_close(card->dev);
+			rtnl_unlock();
 		}
 	} else
 		rc = __qeth_l2_set_online(card->gdev, 0);
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 5475834..b3b6e87 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -1691,39 +1691,43 @@
 
 	cmd = (struct qeth_ipa_cmd *)data;
 	rc = cmd->hdr.return_code;
-	if (rc) {
+	if (rc)
 		QETH_DBF_TEXT_(TRACE, 2, "dxter%x", rc);
-		if (cmd->data.diagass.action == QETH_DIAGS_CMD_TRACE_ENABLE) {
-			switch (rc) {
-			case IPA_RC_HARDWARE_AUTH_ERROR:
-				dev_warn(&card->gdev->dev, "The device is not "
-					"authorized to run as a HiperSockets "
-					"network traffic analyzer\n");
-				break;
-			case IPA_RC_TRACE_ALREADY_ACTIVE:
-				dev_warn(&card->gdev->dev, "A HiperSockets "
-					"network traffic analyzer is already "
-					"active in the HiperSockets LAN\n");
-				break;
-			default:
-				break;
-			}
-		}
-		return 0;
-	}
-
 	switch (cmd->data.diagass.action) {
 	case QETH_DIAGS_CMD_TRACE_QUERY:
 		break;
 	case QETH_DIAGS_CMD_TRACE_DISABLE:
-		card->info.promisc_mode = SET_PROMISC_MODE_OFF;
-		dev_info(&card->gdev->dev, "The HiperSockets network traffic "
-			"analyzer is deactivated\n");
+		switch (rc) {
+		case 0:
+		case IPA_RC_INVALID_SUBCMD:
+			card->info.promisc_mode = SET_PROMISC_MODE_OFF;
+			dev_info(&card->gdev->dev, "The HiperSockets network "
+				"traffic analyzer is deactivated\n");
+			break;
+		default:
+			break;
+		}
 		break;
 	case QETH_DIAGS_CMD_TRACE_ENABLE:
-		card->info.promisc_mode = SET_PROMISC_MODE_ON;
-		dev_info(&card->gdev->dev, "The HiperSockets network traffic "
-			"analyzer is activated\n");
+		switch (rc) {
+		case 0:
+			card->info.promisc_mode = SET_PROMISC_MODE_ON;
+			dev_info(&card->gdev->dev, "The HiperSockets network "
+				"traffic analyzer is activated\n");
+			break;
+		case IPA_RC_HARDWARE_AUTH_ERROR:
+			dev_warn(&card->gdev->dev, "The device is not "
+				"authorized to run as a HiperSockets network "
+				"traffic analyzer\n");
+			break;
+		case IPA_RC_TRACE_ALREADY_ACTIVE:
+			dev_warn(&card->gdev->dev, "A HiperSockets "
+				"network traffic analyzer is already "
+				"active in the HiperSockets LAN\n");
+			break;
+		default:
+			break;
+		}
 		break;
 	default:
 		QETH_DBF_MESSAGE(2, "Unknown sniffer action (0x%04x) on %s\n",
@@ -2215,11 +2219,9 @@
 		if (recovery_mode)
 			qeth_l3_stop(card->dev);
 		else {
-			if (card->dev) {
-				rtnl_lock();
-				dev_close(card->dev);
-				rtnl_unlock();
-			}
+			rtnl_lock();
+			dev_close(card->dev);
+			rtnl_unlock();
 		}
 		if (!card->use_hard_stop) {
 			rc = qeth_send_stoplan(card);
@@ -2900,10 +2902,8 @@
 	int data_offset = -1;
 	int nr_frags;
 
-	if ((card->info.type == QETH_CARD_TYPE_IQD) &&
-	    (((skb->protocol != htons(ETH_P_IPV6)) &&
-	      (skb->protocol != htons(ETH_P_IP))) ||
-	     card->options.sniffer))
+	if (((card->info.type == QETH_CARD_TYPE_IQD) && (!ipv)) ||
+	     card->options.sniffer)
 			goto tx_drop;
 
 	if ((card->state != CARD_STATE_UP) || !card->lan_online) {
@@ -2949,14 +2949,14 @@
 		if (data_offset < 0)
 			skb_pull(new_skb, ETH_HLEN);
 	} else {
-		if (new_skb->protocol == htons(ETH_P_IP)) {
+		if (ipv == 4) {
 			if (card->dev->type == ARPHRD_IEEE802_TR)
 				skb_pull(new_skb, TR_HLEN);
 			else
 				skb_pull(new_skb, ETH_HLEN);
 		}
 
-		if (new_skb->protocol == ETH_P_IPV6 && card->vlangrp &&
+		if (ipv == 6 && card->vlangrp &&
 				vlan_tx_tag_present(new_skb)) {
 			skb_push(new_skb, VLAN_HLEN);
 			skb_copy_to_linear_data(new_skb, new_skb->data + 4, 4);
@@ -3534,11 +3534,9 @@
 	if (card->state == CARD_STATE_RECOVER) {
 		rc = __qeth_l3_set_online(card->gdev, 1);
 		if (rc) {
-			if (card->dev) {
-				rtnl_lock();
-				dev_close(card->dev);
-				rtnl_unlock();
-			}
+			rtnl_lock();
+			dev_close(card->dev);
+			rtnl_unlock();
 		}
 	} else
 		rc = __qeth_l3_set_online(card->gdev, 0);
diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c
index 67f2485..ecef1ed 100644
--- a/drivers/s390/net/smsgiucv.c
+++ b/drivers/s390/net/smsgiucv.c
@@ -31,9 +31,9 @@
 
 struct smsg_callback {
 	struct list_head list;
-	char *prefix;
+	const char *prefix;
 	int len;
-	void (*callback)(char *from, char *str);
+	void (*callback)(const char *from, char *str);
 };
 
 MODULE_AUTHOR
@@ -100,8 +100,8 @@
 	kfree(buffer);
 }
 
-int smsg_register_callback(char *prefix,
-			   void (*callback)(char *from, char *str))
+int smsg_register_callback(const char *prefix,
+			   void (*callback)(const char *from, char *str))
 {
 	struct smsg_callback *cb;
 
@@ -117,8 +117,9 @@
 	return 0;
 }
 
-void smsg_unregister_callback(char *prefix,
-			      void (*callback)(char *from, char *str))
+void smsg_unregister_callback(const char *prefix,
+			      void (*callback)(const char *from,
+					       char *str))
 {
 	struct smsg_callback *cb, *tmp;
 
@@ -176,7 +177,7 @@
 
 static struct device_driver smsg_driver = {
 	.owner = THIS_MODULE,
-	.name = "SMSGIUCV",
+	.name = SMSGIUCV_DRV_NAME,
 	.bus  = &iucv_bus,
 	.pm = &smsg_pm_ops,
 };
diff --git a/drivers/s390/net/smsgiucv.h b/drivers/s390/net/smsgiucv.h
index 67f5d4f..149a115 100644
--- a/drivers/s390/net/smsgiucv.h
+++ b/drivers/s390/net/smsgiucv.h
@@ -5,6 +5,10 @@
  * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
  */
 
-int  smsg_register_callback(char *, void (*)(char *, char *));
-void smsg_unregister_callback(char *, void (*)(char *, char *));
+#define SMSGIUCV_DRV_NAME     "SMSGIUCV"
+
+int  smsg_register_callback(const char *,
+			    void (*)(const char *, char *));
+void smsg_unregister_callback(const char *,
+			      void (*)(const char *, char *));
 
diff --git a/drivers/s390/net/smsgiucv_app.c b/drivers/s390/net/smsgiucv_app.c
new file mode 100644
index 0000000..91579dc
--- /dev/null
+++ b/drivers/s390/net/smsgiucv_app.c
@@ -0,0 +1,211 @@
+/*
+ * Deliver z/VM CP special messages (SMSG) as uevents.
+ *
+ * The driver registers for z/VM CP special messages with the
+ * "APP" prefix. Incoming messages are delivered to user space
+ * as uevents.
+ *
+ * Copyright IBM Corp. 2010
+ * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+ *
+ */
+#define KMSG_COMPONENT		"smsgiucv_app"
+#define pr_fmt(fmt)		KMSG_COMPONENT ": " fmt
+
+#include <linux/ctype.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <net/iucv/iucv.h>
+#include "smsgiucv.h"
+
+/* prefix used for SMSG registration */
+#define SMSG_PREFIX		"APP"
+
+/* SMSG related uevent environment variables */
+#define ENV_SENDER_STR		"SMSG_SENDER="
+#define ENV_SENDER_LEN		(strlen(ENV_SENDER_STR) + 8 + 1)
+#define ENV_PREFIX_STR		"SMSG_ID="
+#define ENV_PREFIX_LEN		(strlen(ENV_PREFIX_STR) + \
+				 strlen(SMSG_PREFIX) + 1)
+#define ENV_TEXT_STR		"SMSG_TEXT="
+#define ENV_TEXT_LEN(msg)	(strlen(ENV_TEXT_STR) + strlen((msg)) + 1)
+
+/* z/VM user ID which is permitted to send SMSGs
+ * If the value is undefined or empty (""), special messages are
+ * accepted from any z/VM user ID. */
+static char *sender;
+module_param(sender, charp, 0400);
+MODULE_PARM_DESC(sender, "z/VM user ID from which CP SMSGs are accepted");
+
+/* SMSG device representation */
+static struct device *smsg_app_dev;
+
+/* list element for queuing received messages for delivery */
+struct smsg_app_event {
+	struct list_head list;
+	char *buf;
+	char *envp[4];
+};
+
+/* queue for outgoing uevents */
+static LIST_HEAD(smsg_event_queue);
+static DEFINE_SPINLOCK(smsg_event_queue_lock);
+
+static void smsg_app_event_free(struct smsg_app_event *ev)
+{
+	kfree(ev->buf);
+	kfree(ev);
+}
+
+static struct smsg_app_event *smsg_app_event_alloc(const char *from,
+						   const char *msg)
+{
+	struct smsg_app_event *ev;
+
+	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
+	if (!ev)
+		return NULL;
+
+	ev->buf = kzalloc(ENV_SENDER_LEN + ENV_PREFIX_LEN +
+			  ENV_TEXT_LEN(msg), GFP_ATOMIC);
+	if (!ev->buf) {
+		kfree(ev);
+		return NULL;
+	}
+
+	/* setting up environment pointers into buf */
+	ev->envp[0] = ev->buf;
+	ev->envp[1] = ev->envp[0] + ENV_SENDER_LEN;
+	ev->envp[2] = ev->envp[1] + ENV_PREFIX_LEN;
+	ev->envp[3] = NULL;
+
+	/* setting up environment: sender, prefix name, and message text */
+	snprintf(ev->envp[0], ENV_SENDER_LEN, ENV_SENDER_STR "%s", from);
+	snprintf(ev->envp[1], ENV_PREFIX_LEN, ENV_PREFIX_STR "%s", SMSG_PREFIX);
+	snprintf(ev->envp[2], ENV_TEXT_LEN(msg), ENV_TEXT_STR "%s", msg);
+
+	return ev;
+}
+
+static void smsg_event_work_fn(struct work_struct *work)
+{
+	LIST_HEAD(event_queue);
+	struct smsg_app_event *p, *n;
+	struct device *dev;
+
+	dev = get_device(smsg_app_dev);
+	if (!dev)
+		return;
+
+	spin_lock_bh(&smsg_event_queue_lock);
+	list_splice_init(&smsg_event_queue, &event_queue);
+	spin_unlock_bh(&smsg_event_queue_lock);
+
+	list_for_each_entry_safe(p, n, &event_queue, list) {
+		list_del(&p->list);
+		kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, p->envp);
+		smsg_app_event_free(p);
+	}
+
+	put_device(dev);
+}
+static DECLARE_WORK(smsg_event_work, smsg_event_work_fn);
+
+static void smsg_app_callback(const char *from, char *msg)
+{
+	struct smsg_app_event *se;
+
+	/* check if the originating z/VM user ID matches
+	 * the configured sender. */
+	if (sender && strlen(sender) > 0 && strcmp(from, sender) != 0)
+		return;
+
+	/* get start of message text (skip prefix and leading blanks) */
+	msg += strlen(SMSG_PREFIX);
+	while (*msg && isspace(*msg))
+		msg++;
+	if (*msg == '\0')
+		return;
+
+	/* allocate event list element and its environment */
+	se = smsg_app_event_alloc(from, msg);
+	if (!se)
+		return;
+
+	/* queue event and schedule work function */
+	spin_lock(&smsg_event_queue_lock);
+	list_add_tail(&se->list, &smsg_event_queue);
+	spin_unlock(&smsg_event_queue_lock);
+
+	schedule_work(&smsg_event_work);
+	return;
+}
+
+static int __init smsgiucv_app_init(void)
+{
+	struct device_driver *smsgiucv_drv;
+	int rc;
+
+	if (!MACHINE_IS_VM)
+		return -ENODEV;
+
+	smsg_app_dev = kzalloc(sizeof(*smsg_app_dev), GFP_KERNEL);
+	if (!smsg_app_dev)
+		return -ENOMEM;
+
+	smsgiucv_drv = driver_find(SMSGIUCV_DRV_NAME, &iucv_bus);
+	if (!smsgiucv_drv) {
+		kfree(smsg_app_dev);
+		return -ENODEV;
+	}
+
+	rc = dev_set_name(smsg_app_dev, KMSG_COMPONENT);
+	if (rc) {
+		kfree(smsg_app_dev);
+		goto fail_put_driver;
+	}
+	smsg_app_dev->bus = &iucv_bus;
+	smsg_app_dev->parent = iucv_root;
+	smsg_app_dev->release = (void (*)(struct device *)) kfree;
+	smsg_app_dev->driver = smsgiucv_drv;
+	rc = device_register(smsg_app_dev);
+	if (rc) {
+		put_device(smsg_app_dev);
+		goto fail_put_driver;
+	}
+
+	/* register with the smsgiucv device driver */
+	rc = smsg_register_callback(SMSG_PREFIX, smsg_app_callback);
+	if (rc) {
+		device_unregister(smsg_app_dev);
+		goto fail_put_driver;
+	}
+
+	rc = 0;
+fail_put_driver:
+	put_driver(smsgiucv_drv);
+	return rc;
+}
+module_init(smsgiucv_app_init);
+
+static void __exit smsgiucv_app_exit(void)
+{
+	/* unregister callback */
+	smsg_unregister_callback(SMSG_PREFIX, smsg_app_callback);
+
+	/* cancel pending work and flush any queued event work */
+	cancel_work_sync(&smsg_event_work);
+	smsg_event_work_fn(&smsg_event_work);
+
+	device_unregister(smsg_app_dev);
+}
+module_exit(smsgiucv_app_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Deliver z/VM CP SMSG as uevents");
+MODULE_AUTHOR("Hendrik Brueckner <brueckner@linux.vnet.ibm.com>");
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index 71b97ff7..6479273 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -319,8 +319,6 @@
 	id->input_handler = zfcp_qdio_int_resp;
 	id->output_handler = zfcp_qdio_int_req;
 	id->int_parm = (unsigned long) qdio;
-	id->flags = QDIO_INBOUND_0COPY_SBALS |
-		    QDIO_OUTBOUND_0COPY_SBALS | QDIO_USE_OUTBOUND_PCIS;
 	id->input_sbal_addr_array = (void **) (qdio->resp_q.sbal);
 	id->output_sbal_addr_array = (void **) (qdio->req_q.sbal);
 
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 208d6df..ff5716d 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -492,7 +492,7 @@
  *	init_orchid		-	initialise the host adapter
  *	@host:host adapter to initialise
  *
- *	Initialise the controller and if neccessary load the firmware.
+ *	Initialise the controller and if necessary load the firmware.
  *
  *	Returns -1 if the initialisation fails.
  */
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 89a5948..a771416 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -531,7 +531,7 @@
  *	initio_stop_bm		-	stop bus master
  *	@host: InitIO we are stopping
  *
- *	Stop any pending DMA operation, aborting the DMA if neccessary
+ *	Stop any pending DMA operation, aborting the DMA if necessary
  */
 
 static void initio_stop_bm(struct initio_host * host)
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 6fde2fa..774e7ac 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -48,7 +48,7 @@
 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
-#define FC_SRB_ABORTED		(1 << 3)	/* abort acknowleged */
+#define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
@@ -519,7 +519,7 @@
  *
  * Called after receiving a Transfer Ready data descriptor.
  * If the LLD is capable of sequence offload then send down the
- * seq_blen ammount of data in single frame, otherwise send
+ * seq_blen amount of data in single frame, otherwise send
  * multiple frames of the maximum frame payload supported by
  * the target port.
  */
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 08b6634..2a40a6e 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -981,7 +981,7 @@
  * function returns, it does not guarantee all the IOCBs are actually aborted.
  *
  * Return code
- *   0 - Sucessfully issued abort iocb on all outstanding flogis (Always 0)
+ *   0 - Successfully issued abort iocb on all outstanding flogis (Always 0)
  **/
 int
 lpfc_els_abort_flogi(struct lpfc_hba *phba)
@@ -3129,7 +3129,7 @@
 	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
 	    (*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT)) {
 		/* A LS_RJT associated with Default RPI cleanup has its own
-		 * seperate code path.
+		 * separate code path.
 		 */
 		if (!(ndlp->nlp_flag & NLP_RM_DFLT_RPI))
 			ls_rjt = 1;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 7f21b47..483fb74 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1575,7 +1575,7 @@
 		case LPFC_PG_TYPE_NO_DIF:
 			num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl,
 					datasegcnt);
-			/* we shoud have 2 or more entries in buffer list */
+			/* we should have 2 or more entries in buffer list */
 			if (num_bde < 2)
 				goto err;
 			break;
@@ -1612,7 +1612,7 @@
 
 			num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl,
 					datasegcnt, protsegcnt);
-			/* we shoud have 3 or more entries in buffer list */
+			/* we should have 3 or more entries in buffer list */
 			if (num_bde < 3)
 				goto err;
 			break;
diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h
index 7db28cd..8c61a4f 100644
--- a/drivers/scsi/pcmcia/nsp_cs.h
+++ b/drivers/scsi/pcmcia/nsp_cs.h
@@ -187,7 +187,7 @@
 #define S_IO		BIT(1)    /* Input/Output line from SCSI bus */
 #define S_CD		BIT(2)    /* Command/Data line from SCSI bus */
 #define S_BUSY		BIT(3)    /* Busy line from SCSI bus         */
-#define S_ACK		BIT(4)    /* Acknowlege line from SCSI bus   */
+#define S_ACK		BIT(4)    /* Acknowledge line from SCSI bus  */
 #define S_REQUEST	BIT(5)    /* Request line from SCSI bus      */
 #define S_SELECT	BIT(6)	  /*                                 */
 #define S_ATN		BIT(7)	  /*                                 */
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 9b44c6f..7985ae4 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2924,7 +2924,7 @@
 		break;
 	default:
 		PM8001_MSG_DBG(pm8001_ha,
-			pm8001_printk("unkown device type(%x)\n", deviceType));
+			pm8001_printk("unknown device type(%x)\n", deviceType));
 		break;
 	}
 	phy->phy_type |= PORT_TYPE_SAS;
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 7f9c83a..3b2c98f 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -600,7 +600,7 @@
   * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
   * device ID(according to device's sas address) and returned it to LLDD. From
   * now on, we communicate with HBA FW with the device ID which HBA assigned
-  * rather than sas address. it is the neccessary step for our HBA but it is
+  * rather than sas address. it is the necessary step for our HBA but it is
   * the optional for other HBA driver.
   */
 static int pm8001_dev_found_notify(struct domain_device *dev)
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 92f89d5..b8ad07c 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -938,7 +938,7 @@
 
 /*
  * pmcraid_ioctl_header - definition of header structure that preceeds all the
- * buffers given as ioctl arguements.
+ * buffers given as ioctl arguments.
  *
  * .signature           : always ASCII string, "PMCRAID"
  * .reserved            : not used
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index fa34b92..1b82170 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -738,7 +738,7 @@
 	 * sanely maintain.
 	 */
 	if (request_irq(qpti->irq, qpti_intr,
-			IRQF_SHARED, "Qlogic/PTI", qpti))
+			IRQF_SHARED, "QlogicPTI", qpti))
 		goto fail;
 
 	printk("qlogicpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 466fae8..a82ab3e 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2111,7 +2111,7 @@
  *	which is followed by sdaaa.
  *
  *	This is basically 26 base counting with one extra 'nil' entry
- *	at the beggining from the second digit on and can be
+ *	at the beginning from the second digit on and can be
  *	determined using similar method as 26 base conversion with the
  *	index shifted -1 after each digit is computed.
  *
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 1d7a878..0d9d6f7 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -595,8 +595,6 @@
 		ses_dev->page10_len = len;
 		buf = NULL;
 	}
-	kfree(hdr_buf);
-
 	scomp = kzalloc(sizeof(struct ses_component) * components, GFP_KERNEL);
 	if (!scomp)
 		goto err_free;
@@ -608,6 +606,8 @@
 		goto err_free;
 	}
 
+	kfree(hdr_buf);
+
 	edev->scratch = ses_dev;
 	for (i = 0; i < components; i++)
 		edev->component[i].scratch = scomp + i;
diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c
index 0807b26..fef0e3c 100644
--- a/drivers/scsi/sgiwd93.c
+++ b/drivers/scsi/sgiwd93.c
@@ -226,7 +226,7 @@
 	.use_clustering		= DISABLE_CLUSTERING,
 };
 
-static int __init sgiwd93_probe(struct platform_device *pdev)
+static int __devinit sgiwd93_probe(struct platform_device *pdev)
 {
 	struct sgiwd93_platform_data *pd = pdev->dev.platform_data;
 	unsigned char *wdregs = pd->wdregs;
diff --git a/drivers/scsi/sni_53c710.c b/drivers/scsi/sni_53c710.c
index 37b3359..56cf0bb 100644
--- a/drivers/scsi/sni_53c710.c
+++ b/drivers/scsi/sni_53c710.c
@@ -64,7 +64,7 @@
 	.module		= THIS_MODULE,
 };
 
-static int __init snirm710_probe(struct platform_device *dev)
+static int __devinit snirm710_probe(struct platform_device *dev)
 {
 	unsigned long base;
 	struct NCR_700_Host_Parameters *hostdata;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 7c4ebe6e..c3db16b 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2408,6 +2408,21 @@
 }
 
 static void
+serial8250_set_ldisc(struct uart_port *port)
+{
+	int line = port->line;
+
+	if (line >= port->state->port.tty->driver->num)
+		return;
+
+	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		serial8250_enable_ms(port);
+	} else
+		port->flags &= ~UPF_HARDPPS_CD;
+}
+
+static void
 serial8250_pm(struct uart_port *port, unsigned int state,
 	      unsigned int oldstate)
 {
@@ -2628,6 +2643,7 @@
 	.startup	= serial8250_startup,
 	.shutdown	= serial8250_shutdown,
 	.set_termios	= serial8250_set_termios,
+	.set_ldisc	= serial8250_set_ldisc,
 	.pm		= serial8250_pm,
 	.type		= serial8250_type,
 	.release_port	= serial8250_release_port,
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d6ff733..f55c494 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -447,7 +447,7 @@
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on ARM && PLAT_S3C
+	depends on ARM && PLAT_SAMSUNG
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -455,11 +455,18 @@
 	  provide all of these ports, depending on how the serial port
 	  pins are configured.
 
+config SERIAL_SAMSUNG_UARTS_4
+	bool
+	depends on ARM && PLAT_SAMSUNG
+	default y if CPU_S3C2443
+	help
+	  Internal node for the common case of 4 Samsung compatible UARTs
+
 config SERIAL_SAMSUNG_UARTS
 	int
-	depends on ARM && PLAT_S3C
+	depends on ARM && PLAT_SAMSUNG
 	default 2 if ARCH_S3C2400
-	default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
+	default 4 if SERIAL_SAMSUNG_UARTS_4
 	default 3
 	help
 	  Select the number of available UART ports for the Samsung S3C
@@ -526,20 +533,30 @@
 	  Serial port support for the Samsung S3C24A0 SoC
 
 config SERIAL_S3C6400
-	tristate "Samsung S3C6400/S3C6410 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
+	tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440)
+	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
-	  Serial port support for the Samsung S3C6400 and S3C6410
+	  Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
 	  SoCs
 
 config SERIAL_S5PC100
 	tristate "Samsung S5PC100 Serial port support"
 	depends on SERIAL_SAMSUNG && CPU_S5PC100
+	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
 	  Serial port support for the Samsung S5PC100 SoCs
 
+config SERIAL_S5PV210
+	tristate "Samsung S5PV210 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
+	select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+	default y
+	help
+	  Serial port support for Samsung's S5P Family of SoC's
+
 config SERIAL_MAX3100
 	tristate "MAX3100 support"
 	depends on SPI
@@ -996,7 +1013,7 @@
 
 config SERIAL_SH_SCI
 	tristate "SuperH SCI(F) serial port support"
-	depends on HAVE_CLK && (SUPERH || H8300)
+	depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE)
 	select SERIAL_CORE
 
 config SERIAL_SH_SCI_NR_UARTS
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 5548fe7..6aa4723 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -45,6 +45,7 @@
 obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
 obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
+obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 429a8ae..e4b3c2c 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -471,6 +471,20 @@
 	spin_unlock_irqrestore(&uap->port.lock, flags);
 }
 
+static void pl010_set_ldisc(struct uart_port *port)
+{
+	int line = port->line;
+
+	if (line >= port->state->port.tty->driver->num)
+		return;
+
+	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		pl010_enable_ms(port);
+	} else
+		port->flags &= ~UPF_HARDPPS_CD;
+}
+
 static const char *pl010_type(struct uart_port *port)
 {
 	return port->type == PORT_AMBA ? "AMBA" : NULL;
@@ -531,6 +545,7 @@
 	.startup	= pl010_startup,
 	.shutdown	= pl010_shutdown,
 	.set_termios	= pl010_set_termios,
+	.set_ldisc	= pl010_set_ldisc,
 	.type		= pl010_type,
 	.release_port	= pl010_release_port,
 	.request_port	= pl010_request_port,
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index d00fcf8..e579d7a 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -440,7 +440,7 @@
 
 		temp = readl(sport->port.membase + USR2);
 		if (temp & USR2_BRCD) {
-			writel(temp | USR2_BRCD, sport->port.membase + USR2);
+			writel(USR2_BRCD, sport->port.membase + USR2);
 			if (uart_handle_break(&sport->port))
 				continue;
 		}
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index ce75e28..1700b1a 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -102,6 +102,7 @@
 	.name		= "Samsung S3C2412 UART",
 	.type		= PORT_S3C2412,
 	.fifosize	= 64,
+	.has_divslot	= 1,
 	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
 	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
 	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
new file mode 100644
index 0000000..8dc0383
--- /dev/null
+++ b/drivers/serial/s5pv210.c
@@ -0,0 +1,154 @@
+/* linux/drivers/serial/s5pv210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on drivers/serial/s3c6400.c
+ *
+ * Driver for Samsung S5PV210 SoC UARTs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <plat/regs-serial.h>
+#include "samsung.h"
+
+static int s5pv210_serial_setsource(struct uart_port *port,
+					struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	if (strcmp(clk->name, "pclk") == 0)
+		ucon &= ~S5PV210_UCON_CLKMASK;
+	else if (strcmp(clk->name, "uclk1") == 0)
+		ucon |= S5PV210_UCON_CLKMASK;
+	else {
+		printk(KERN_ERR "unknown clock source %s\n", clk->name);
+		return -EINVAL;
+	}
+
+	wr_regl(port, S3C2410_UCON, ucon);
+	return 0;
+}
+
+
+static int s5pv210_serial_getsource(struct uart_port *port,
+					struct s3c24xx_uart_clksrc *clk)
+{
+	u32 ucon = rd_regl(port, S3C2410_UCON);
+
+	clk->divisor = 1;
+
+	switch (ucon & S5PV210_UCON_CLKMASK) {
+	case S5PV210_UCON_PCLK:
+		clk->name = "pclk";
+		break;
+	case S5PV210_UCON_UCLK:
+		clk->name = "uclk1";
+		break;
+	}
+
+	return 0;
+}
+
+static int s5pv210_serial_resetport(struct uart_port *port,
+					struct s3c2410_uartcfg *cfg)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	ucon &= S5PV210_UCON_CLKMASK;
+	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+	/* reset both fifos */
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	return 0;
+}
+
+#define S5PV210_UART_DEFAULT_INFO(fifo_size)			\
+		.name		= "Samsung S5PV210 UART0",	\
+		.type		= PORT_S3C6400,			\
+		.fifosize	= fifo_size,			\
+		.has_divslot	= 1,				\
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,	\
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,	\
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,	\
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,	\
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,	\
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,	\
+		.get_clksrc	= s5pv210_serial_getsource,	\
+		.set_clksrc	= s5pv210_serial_setsource,	\
+		.reset_port	= s5pv210_serial_resetport
+
+static struct s3c24xx_uart_info s5p_port_fifo256 = {
+	S5PV210_UART_DEFAULT_INFO(256),
+};
+
+static struct s3c24xx_uart_info s5p_port_fifo64 = {
+	S5PV210_UART_DEFAULT_INFO(64),
+};
+
+static struct s3c24xx_uart_info s5p_port_fifo16 = {
+	S5PV210_UART_DEFAULT_INFO(16),
+};
+
+static struct s3c24xx_uart_info *s5p_uart_inf[] = {
+	[0] = &s5p_port_fifo256,
+	[1] = &s5p_port_fifo64,
+	[2] = &s5p_port_fifo16,
+	[3] = &s5p_port_fifo16,
+};
+
+/* device management */
+static int s5p_serial_probe(struct platform_device *pdev)
+{
+	return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
+}
+
+static struct platform_driver s5p_serial_drv = {
+	.probe		= s5p_serial_probe,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
+	.driver		= {
+		.name	= "s5pv210-uart",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init s5pv210_serial_console_init(void)
+{
+	return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf);
+}
+
+console_initcall(s5pv210_serial_console_init);
+
+static int __init s5p_serial_init(void)
+{
+	return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf);
+}
+
+static void __exit s5p_serial_exit(void)
+{
+	platform_driver_unregister(&s5p_serial_drv);
+}
+
+module_init(s5p_serial_init);
+module_exit(s5p_serial_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s5pv210-uart");
+MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support");
+MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 52e3df1..a9d6c56 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1271,7 +1271,7 @@
 	unsigned long ufstat, utrstat;
 
 	if (ufcon & S3C2410_UFCON_FIFOMODE) {
-		/* fifo mode - check ammount of data in fifo registers... */
+		/* fifo mode - check amount of data in fifo registers... */
 
 		ufstat = rd_regl(port, S3C2410_UFSTAT);
 		return (ufstat & info->tx_fifofull) ? 0 : 1;
@@ -1374,7 +1374,7 @@
  * data.
 */
 
-static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
+static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info)
 {
 	struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
 	struct platform_device **platdev_ptr;
@@ -1385,7 +1385,7 @@
 	platdev_ptr = s3c24xx_uart_devs;
 
 	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
-		s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
+		s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr);
 	}
 
 	return 0;
@@ -1451,7 +1451,7 @@
 };
 
 int s3c24xx_serial_initconsole(struct platform_driver *drv,
-			       struct s3c24xx_uart_info *info)
+			       struct s3c24xx_uart_info **info)
 
 {
 	struct platform_device *dev = s3c24xx_uart_devs[0];
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 1fb2234..0ac06a0 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -75,19 +75,24 @@
 extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
 
 extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
-				      struct s3c24xx_uart_info *uart);
+				      struct s3c24xx_uart_info **uart);
 
 extern int s3c24xx_serial_init(struct platform_driver *drv,
 			       struct s3c24xx_uart_info *info);
 
 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
 
-#define s3c24xx_console_init(__drv, __inf)			\
-static int __init s3c_serial_console_init(void)			\
-{								\
-	return s3c24xx_serial_initconsole(__drv, __inf);	\
-}								\
-								\
+#define s3c24xx_console_init(__drv, __inf)				\
+static int __init s3c_serial_console_init(void)				\
+{									\
+	struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS];	\
+	int i;								\
+									\
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)		\
+		uinfo[i] = __inf;					\
+	return s3c24xx_serial_initconsole(__drv, uinfo);		\
+}									\
+									\
 console_initcall(s3c_serial_console_init)
 
 #else
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index f7d2589..fad67d3 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -30,7 +30,8 @@
  */
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7721)
+      defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SHMOBILE)
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define PORT_PTCR	   0xA405011EUL
 # define PORT_PVCR	   0xA4050122UL
@@ -228,7 +229,8 @@
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SHMOBILE)
 # define SCIF_ORER    0x0200
 # define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
 # define SCIF_RFDC_MASK 0x007f
@@ -261,7 +263,8 @@
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SHMOBILE)
 # define SCxSR_RDxF_CLEAR(port)	 (sci_in(port, SCxSR) & 0xfffc)
 # define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
 # define SCxSR_TDxE_CLEAR(port)	 (sci_in(port, SCxSR) & 0xffdf)
@@ -356,7 +359,7 @@
     SCI_OUT(sci_size, sci_offset, value);				\
   }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_ARCH_SHMOBILE)
 #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
 		                sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
@@ -366,7 +369,8 @@
 	  CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7721)
+      defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SHMOBILE)
 #define SCIF_FNS(name, scif_offset, scif_size) \
   CPU_SCIF_FNS(name, scif_offset, scif_size)
 #else
@@ -401,7 +405,8 @@
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SHMOBILE)
 
 SCIF_FNS(SCSMR,  0x00, 16)
 SCIF_FNS(SCBRR,  0x04,  8)
@@ -413,7 +418,7 @@
 SCIF_FNS(SCFDR,  0x1c, 16)
 SCIF_FNS(SCxTDR, 0x20,  8)
 SCIF_FNS(SCxRDR, 0x24,  8)
-SCIF_FNS(SCLSR,  0x24, 16)
+SCIF_FNS(SCLSR,  0x00,  0)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
       defined(CONFIG_CPU_SUBTYPE_SH7724)
 SCIx_FNS(SCSMR,  0x00, 16, 0x00, 16)
@@ -583,7 +588,8 @@
 #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7721)
+      defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SHMOBILE)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
       defined(CONFIG_CPU_SUBTYPE_SH7724)
diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index 3a5a17d..c275039 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -762,6 +762,10 @@
 
 	if (desc->hw.ack_regs)
 		ack_handle[irq] = intc_ack_data(desc, d, enum_id);
+
+#ifdef CONFIG_ARM
+	set_irq_flags(irq, IRQF_VALID); /* Enable IRQ on ARM systems */
+#endif
 }
 
 static unsigned int __init save_reg(struct intc_desc_int *d,
@@ -1024,8 +1028,12 @@
 out_unlock:
 	spin_unlock_irqrestore(&vector_lock, flags);
 
-	if (irq > 0)
+	if (irq > 0) {
 		dynamic_irq_init(irq);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID); /* Enable IRQ on ARM systems */
+#endif
+	}
 
 	return irq;
 }
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index c010733..1fabede 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -275,7 +275,7 @@
  * Claim the FIQ handler (only one can be active at any one time) and
  * then setup the correct transfer code for this transfer.
  *
- * This call updates all the necessary state information if sucessful,
+ * This call updates all the necessary state information if successful,
  * so the caller does not need to do anything more than start the transfer
  * as normal, since the IRQ will have been re-routed to the FIQ handler.
 */
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index cadb6f7..7ebecc9 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -770,13 +770,8 @@
 	.id_table =	id_table,
 };
 
-static ssize_t version_show(struct class *dev, char *buf)
-{
-	return sprintf(buf, ASUS_OLED_UNDERSCORE_NAME " %s\n",
-		       ASUS_OLED_VERSION);
-}
-
-static CLASS_ATTR(version, S_IRUGO, version_show, NULL);
+static CLASS_ATTR_STRING(version, S_IRUGO,
+		 	ASUS_OLED_UNDERSCORE_NAME " " ASUS_OLED_VERSION);
 
 static int __init asus_oled_init(void)
 {
@@ -788,7 +783,7 @@
 		return PTR_ERR(oled_class);
 	}
 
-	retval = class_create_file(oled_class, &class_attr_version);
+	retval = class_create_file(oled_class, &class_attr_version.attr);
 	if (retval) {
 		err("Error creating class version file");
 		goto error;
@@ -810,7 +805,7 @@
 
 static void __exit asus_oled_exit(void)
 {
-	class_remove_file(oled_class, &class_attr_version);
+	class_remove_file(oled_class, &class_attr_version.attr);
 	class_destroy(oled_class);
 
 	usb_deregister(&oled_driver);
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 8aa1955..1da73ec 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -44,17 +44,6 @@
 
 	  If you don't know what to do here, say N.
 
-config UIO_SMX
-	tristate "SMX cryptengine UIO interface"
-	help
-	  Userspace IO interface to the Cryptography engine found on the
-	  Nias Digital SMX boards.  These will be available from Q4 2008
-	  from http://www.niasdigital.com.  The userspace part of this
-	  driver will be released under the GPL at the same time as the
-	  hardware and will be able to be downloaded from the same site.
-
-	  If you compile this as a module, it will be called uio_smx.
-
 config UIO_AEC
 	tristate "AEC video timestamp device"
 	depends on PCI
@@ -74,6 +63,7 @@
 
 config UIO_SERCOS3
 	tristate "Automata Sercos III PCI card driver"
+	depends on PCI
 	help
 	  Userspace I/O interface for the Sercos III PCI card from
 	  Automata GmbH. The userspace part of this driver will be
@@ -87,11 +77,21 @@
 config UIO_PCI_GENERIC
 	tristate "Generic driver for PCI 2.3 and PCI Express cards"
 	depends on PCI
-	default n
 	help
 	  Generic driver that you can bind, dynamically, to any
 	  PCI 2.3 compliant and PCI Express card. It is useful,
 	  primarily, for virtualization scenarios.
 	  If you compile this as a module, it will be called uio_pci_generic.
 
+config UIO_NETX
+	tristate "Hilscher NetX Card driver"
+	depends on PCI
+	help
+	  Driver for Hilscher NetX based fieldbus cards (cifX, comX).
+	  This driver requires a userspace component that comes with the card
+	  or is available from Hilscher (http://www.hilscher.com).
+
+	  To compile this driver as a module, choose M here; the module
+	  will be called uio_netx.
+
 endif
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index 73b2e75..18fd818 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -2,7 +2,7 @@
 obj-$(CONFIG_UIO_CIF)	+= uio_cif.o
 obj-$(CONFIG_UIO_PDRV)	+= uio_pdrv.o
 obj-$(CONFIG_UIO_PDRV_GENIRQ)	+= uio_pdrv_genirq.o
-obj-$(CONFIG_UIO_SMX)	+= uio_smx.o
 obj-$(CONFIG_UIO_AEC)	+= uio_aec.o
 obj-$(CONFIG_UIO_SERCOS3)	+= uio_sercos3.o
 obj-$(CONFIG_UIO_PCI_GENERIC)	+= uio_pci_generic.o
+obj-$(CONFIG_UIO_NETX)	+= uio_netx.o
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index e941367..4de382a 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -129,7 +129,7 @@
 	return entry->show(mem, buf);
 }
 
-static struct sysfs_ops map_sysfs_ops = {
+static const struct sysfs_ops map_sysfs_ops = {
 	.show = map_type_show,
 };
 
@@ -217,7 +217,7 @@
 	return entry->show(port, buf);
 }
 
-static struct sysfs_ops portio_sysfs_ops = {
+static const struct sysfs_ops portio_sysfs_ops = {
 	.show = portio_type_show,
 };
 
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
new file mode 100644
index 0000000..afbf0bd
--- /dev/null
+++ b/drivers/uio/uio_netx.c
@@ -0,0 +1,172 @@
+/*
+ * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
+ * See http://www.hilscher.com for details.
+ *
+ * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2008 Manuel Traut <manut@linutronix.de>
+ *
+ * Licensed under GPL version 2 only.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/uio_driver.h>
+
+#define PCI_VENDOR_ID_HILSCHER		0x15CF
+#define PCI_DEVICE_ID_HILSCHER_NETX	0x0000
+#define PCI_SUBDEVICE_ID_NXSB_PCA	0x3235
+#define PCI_SUBDEVICE_ID_NXPCA		0x3335
+
+#define DPM_HOST_INT_EN0	0xfff0
+#define DPM_HOST_INT_STAT0	0xffe0
+
+#define DPM_HOST_INT_MASK	0xe600ffff
+#define DPM_HOST_INT_GLOBAL_EN	0x80000000
+
+static irqreturn_t netx_handler(int irq, struct uio_info *dev_info)
+{
+	void __iomem *int_enable_reg = dev_info->mem[0].internal_addr
+					+ DPM_HOST_INT_EN0;
+	void __iomem *int_status_reg = dev_info->mem[0].internal_addr
+					+ DPM_HOST_INT_STAT0;
+
+	/* Is one of our interrupts enabled and active ? */
+	if (!(ioread32(int_enable_reg) & ioread32(int_status_reg)
+		& DPM_HOST_INT_MASK))
+		return IRQ_NONE;
+
+	/* Disable interrupt */
+	iowrite32(ioread32(int_enable_reg) & ~DPM_HOST_INT_GLOBAL_EN,
+		int_enable_reg);
+	return IRQ_HANDLED;
+}
+
+static int __devinit netx_pci_probe(struct pci_dev *dev,
+					const struct pci_device_id *id)
+{
+	struct uio_info *info;
+	int bar;
+
+	info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	if (pci_enable_device(dev))
+		goto out_free;
+
+	if (pci_request_regions(dev, "netx"))
+		goto out_disable;
+
+	switch (id->device) {
+	case PCI_DEVICE_ID_HILSCHER_NETX:
+		bar = 0;
+		info->name = "netx";
+		break;
+	default:
+		bar = 2;
+		info->name = "netx_plx";
+	}
+
+	/* BAR0 or 2 points to the card's dual port memory */
+	info->mem[0].addr = pci_resource_start(dev, bar);
+	if (!info->mem[0].addr)
+		goto out_release;
+	info->mem[0].internal_addr = ioremap(pci_resource_start(dev, bar),
+						pci_resource_len(dev, bar));
+
+	if (!info->mem[0].internal_addr)
+			goto out_release;
+
+	info->mem[0].size = pci_resource_len(dev, bar);
+	info->mem[0].memtype = UIO_MEM_PHYS;
+	info->irq = dev->irq;
+	info->irq_flags = IRQF_SHARED;
+	info->handler = netx_handler;
+	info->version = "0.0.1";
+
+	/* Make sure all interrupts are disabled */
+	iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+
+	if (uio_register_device(&dev->dev, info))
+		goto out_unmap;
+
+	pci_set_drvdata(dev, info);
+	dev_info(&dev->dev, "Found %s card, registered UIO device.\n",
+				info->name);
+
+	return 0;
+
+out_unmap:
+	iounmap(info->mem[0].internal_addr);
+out_release:
+	pci_release_regions(dev);
+out_disable:
+	pci_disable_device(dev);
+out_free:
+	kfree(info);
+	return -ENODEV;
+}
+
+static void netx_pci_remove(struct pci_dev *dev)
+{
+	struct uio_info *info = pci_get_drvdata(dev);
+
+	/* Disable all interrupts */
+	iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+	uio_unregister_device(info);
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+	pci_set_drvdata(dev, NULL);
+	iounmap(info->mem[0].internal_addr);
+
+	kfree(info);
+}
+
+static struct pci_device_id netx_pci_ids[] = {
+	{
+		.vendor =	PCI_VENDOR_ID_HILSCHER,
+		.device =	PCI_DEVICE_ID_HILSCHER_NETX,
+		.subvendor =	0,
+		.subdevice =	0,
+	},
+	{
+		.vendor =	PCI_VENDOR_ID_PLX,
+		.device =	PCI_DEVICE_ID_PLX_9030,
+		.subvendor =	PCI_VENDOR_ID_PLX,
+		.subdevice =	PCI_SUBDEVICE_ID_NXSB_PCA,
+	},
+	{
+		.vendor =	PCI_VENDOR_ID_PLX,
+		.device =	PCI_DEVICE_ID_PLX_9030,
+		.subvendor =	PCI_VENDOR_ID_PLX,
+		.subdevice =	PCI_SUBDEVICE_ID_NXPCA,
+	},
+	{ 0, }
+};
+
+static struct pci_driver netx_pci_driver = {
+	.name = "netx",
+	.id_table = netx_pci_ids,
+	.probe = netx_pci_probe,
+	.remove = netx_pci_remove,
+};
+
+static int __init netx_init_module(void)
+{
+	return pci_register_driver(&netx_pci_driver);
+}
+
+static void __exit netx_exit_module(void)
+{
+	pci_unregister_driver(&netx_pci_driver);
+}
+
+module_init(netx_init_module);
+module_exit(netx_exit_module);
+
+MODULE_DEVICE_TABLE(pci, netx_pci_ids);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hans J. Koch, Manuel Traut");
diff --git a/drivers/uio/uio_smx.c b/drivers/uio/uio_smx.c
deleted file mode 100644
index 44054a6..0000000
--- a/drivers/uio/uio_smx.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * UIO SMX Cryptengine driver.
- *
- * (C) 2008 Nias Digital P/L <bn@niasdigital.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/uio_driver.h>
-#include <linux/io.h>
-
-#define DRV_NAME "smx-ce"
-#define DRV_VERSION "0.03"
-
-#define SMX_CSR  0x00000000
-#define SMX_EnD  0x00000001
-#define SMX_RUN  0x00000002
-#define SMX_DRDY 0x00000004
-#define SMX_ERR  0x00000008
-
-static irqreturn_t smx_handler(int irq, struct uio_info *dev_info)
-{
-	void __iomem *csr = dev_info->mem[0].internal_addr + SMX_CSR;
-
-	u32 status = ioread32(csr);
-
-	if (!(status & SMX_DRDY))
-		return IRQ_NONE;
-
-	/* Disable interrupt */
-	iowrite32(status & ~SMX_DRDY, csr);
-	return IRQ_HANDLED;
-}
-
-static int __devinit smx_ce_probe(struct platform_device *dev)
-{
-
-	int ret = -ENODEV;
-	struct uio_info *info;
-	struct resource *regs;
-
-	info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!regs) {
-		dev_err(&dev->dev, "No memory resource specified\n");
-		goto out_free;
-	}
-
-	info->mem[0].addr = regs->start;
-	if (!info->mem[0].addr) {
-		dev_err(&dev->dev, "Invalid memory resource\n");
-		goto out_free;
-	}
-
-	info->mem[0].size = regs->end - regs->start + 1;
-	info->mem[0].internal_addr = ioremap(regs->start, info->mem[0].size);
-
-	if (!info->mem[0].internal_addr) {
-		dev_err(&dev->dev, "Can't remap memory address range\n");
-		goto out_free;
-	}
-
-	info->mem[0].memtype = UIO_MEM_PHYS;
-
-	info->name = "smx-ce";
-	info->version = "0.03";
-
-	info->irq = platform_get_irq(dev, 0);
-	if (info->irq < 0) {
-		ret = info->irq;
-		dev_err(&dev->dev, "No (or invalid) IRQ resource specified\n");
-		goto out_unmap;
-	}
-
-	info->irq_flags = IRQF_SHARED;
-	info->handler = smx_handler;
-
-	platform_set_drvdata(dev, info);
-
-	ret = uio_register_device(&dev->dev, info);
-
-	if (ret)
-		goto out_unmap;
-
-	return 0;
-
-out_unmap:
-	iounmap(info->mem[0].internal_addr);
-out_free:
-	kfree(info);
-
-	return ret;
-}
-
-static int __devexit smx_ce_remove(struct platform_device *dev)
-{
-	struct uio_info *info = platform_get_drvdata(dev);
-
-	uio_unregister_device(info);
-	platform_set_drvdata(dev, NULL);
-	iounmap(info->mem[0].internal_addr);
-
-	kfree(info);
-
-	return 0;
-}
-
-static struct platform_driver smx_ce_driver = {
-	.probe		= smx_ce_probe,
-	.remove		= __devexit_p(smx_ce_remove),
-	.driver		= {
-		.name	= DRV_NAME,
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init smx_ce_init_module(void)
-{
-	return platform_driver_register(&smx_ce_driver);
-}
-module_init(smx_ce_init_module);
-
-static void __exit smx_ce_exit_module(void)
-{
-	platform_driver_unregister(&smx_ce_driver);
-}
-module_exit(smx_ce_exit_module);
-
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Ben Nizette <bn@niasdigital.com>");
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index a7037bf..f3c2338 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -489,10 +489,10 @@
 	if (device_is_registered(dev)) {
 		device_release_driver(dev);
 	} else {
-		down(&dev->sem);
+		device_lock(dev);
 		usb_unbind_interface(dev);
 		dev->driver = NULL;
-		up(&dev->sem);
+		device_unlock(dev);
 	}
 }
 EXPORT_SYMBOL_GPL(usb_driver_release_interface);
diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mx3_udc.c
index 4bc2bf3..20a802e 100644
--- a/drivers/usb/gadget/fsl_mx3_udc.c
+++ b/drivers/usb/gadget/fsl_mx3_udc.c
@@ -17,6 +17,8 @@
 #include <linux/fsl_devices.h>
 #include <linux/platform_device.h>
 
+#include <mach/hardware.h>
+
 static struct clk *mxc_ahb_clk;
 static struct clk *mxc_usb_clk;
 
@@ -28,14 +30,16 @@
 
 	pdata = pdev->dev.platform_data;
 
-	mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
-	if (IS_ERR(mxc_ahb_clk))
-		return PTR_ERR(mxc_ahb_clk);
+	if (!cpu_is_mx35()) {
+		mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
+		if (IS_ERR(mxc_ahb_clk))
+			return PTR_ERR(mxc_ahb_clk);
 
-	ret = clk_enable(mxc_ahb_clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
-		goto eenahb;
+		ret = clk_enable(mxc_ahb_clk);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
+			goto eenahb;
+		}
 	}
 
 	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
@@ -50,6 +54,7 @@
 	if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
 	    (freq < 59999000 || freq > 60001000)) {
 		dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
+		ret = -EINVAL;
 		goto eclkrate;
 	}
 
@@ -66,9 +71,11 @@
 	clk_put(mxc_usb_clk);
 	mxc_usb_clk = NULL;
 egusb:
-	clk_disable(mxc_ahb_clk);
+	if (!cpu_is_mx35())
+		clk_disable(mxc_ahb_clk);
 eenahb:
-	clk_put(mxc_ahb_clk);
+	if (!cpu_is_mx35())
+		clk_put(mxc_ahb_clk);
 	return ret;
 }
 
@@ -90,6 +97,8 @@
 		clk_disable(mxc_usb_clk);
 		clk_put(mxc_usb_clk);
 	}
-	clk_disable(mxc_ahb_clk);
-	clk_put(mxc_ahb_clk);
+	if (!cpu_is_mx35()) {
+		clk_disable(mxc_ahb_clk);
+		clk_put(mxc_ahb_clk);
+	}
 }
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index e6fedbd..be5fb34 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -65,6 +65,10 @@
 #include <mach/pxa25x-udc.h>
 #endif
 
+#ifdef CONFIG_ARCH_LUBBOCK
+#include <mach/lubbock.h>
+#endif
+
 #include <asm/mach/udc_pxa2xx.h>
 
 
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 7e5bf59..f742c8e 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -30,7 +30,7 @@
 
 #include <plat/regs-usb-hsotg-phy.h>
 #include <plat/regs-usb-hsotg.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-sys.h>
 #include <plat/udc-hs.h>
 
 #define DMA_ADDR_INVALID (~((dma_addr_t)0))
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 6691381..a883f9d 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -274,7 +274,7 @@
 	/* NOTE: DaVinci shadows the Mentor IRQs.  Don't manage them through
 	 * the Mentor registers (except for setup), use the TI ones and EOI.
 	 *
-	 * Docs describe irq "vector" registers asociated with the CPPI and
+	 * Docs describe irq "vector" registers associated with the CPPI and
 	 * USB EOI registers.  These hold a bitmask corresponding to the
 	 * current IRQ, not an irq handler address.  Would using those bits
 	 * resolve some of the races observed in this dispatch code??
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 292894a..8d8062b 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -491,7 +491,7 @@
 #define MUSB_FLAT_OFFSET(_epnum, _offset)	\
 	(USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
 
-/* Not implemented - HW has seperate Tx/Rx FIFO */
+/* Not implemented - HW has separate Tx/Rx FIFO */
 #define MUSB_TXCSR_MODE			0x0000
 
 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index baf74b4..e23c779 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -152,7 +152,7 @@
 	int isthrottled;		   /* if throttled, discard reads */
 	wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
 	char prev_status, diff_status;	   /* used for TIOCMIWAIT */
-	/* we pass a pointer to this as the arguement sent to
+	/* we pass a pointer to this as the argument sent to
 	   cypress_set_termios old_termios */
 	struct ktermios tmp_termios; 	   /* stores the old termios settings */
 };
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index f37476e..701452a 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -115,7 +115,7 @@
 		}
 	} else {
 		dev_dbg(&priv->udev->dev,
-			"Improper ammount of data received from the device, "
+			"Improper amount of data received from the device, "
 			"%d bytes", urb->actual_length);
 	}
 
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 7239888..ee190cc 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -94,7 +94,7 @@
 		}
 	} else {
 		dev_dbg(&priv->udev->dev,
-			"Improper ammount of data received from the device, "
+			"Improper amount of data received from the device, "
 			"%d bytes", urb->actual_length);
 	}
 
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index fd2fd4e..759cda5 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -198,7 +198,7 @@
  *                 ports) this HC will take. Read-only.
  *
  * @port      	   Array of port status for each fake root port. Guaranteed to
- *                 always be the same lenght during device existence
+ *                 always be the same length during device existence
  *                 [this allows for some unlocked but referenced reading].
  *
  * @mmcies_max	   Max number of Information Elements this HC can send
diff --git a/drivers/uwb/driver.c b/drivers/uwb/driver.c
index da77e41..08bd6db 100644
--- a/drivers/uwb/driver.c
+++ b/drivers/uwb/driver.c
@@ -74,13 +74,16 @@
 unsigned long beacon_timeout_ms = 500;
 
 static
-ssize_t beacon_timeout_ms_show(struct class *class, char *buf)
+ssize_t beacon_timeout_ms_show(struct class *class,
+				struct class_attribute *attr,
+				char *buf)
 {
 	return scnprintf(buf, PAGE_SIZE, "%lu\n", beacon_timeout_ms);
 }
 
 static
 ssize_t beacon_timeout_ms_store(struct class *class,
+				struct class_attribute *attr,
 				const char *buf, size_t size)
 {
 	unsigned long bt;
diff --git a/drivers/uwb/i1480/i1480-est.c b/drivers/uwb/i1480/i1480-est.c
index 7bf8c6f..f2eb4d8 100644
--- a/drivers/uwb/i1480/i1480-est.c
+++ b/drivers/uwb/i1480/i1480-est.c
@@ -54,7 +54,7 @@
 		.size = sizeof(struct i1480_rceb) + 2 },
 };
 
-static int i1480_est_init(void)
+static int __init i1480_est_init(void)
 {
 	int result = uwb_est_register(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
 				      i1480_est_fd00,
@@ -73,7 +73,7 @@
 }
 module_init(i1480_est_init);
 
-static void i1480_est_exit(void)
+static void __exit i1480_est_exit(void)
 {
 	uwb_est_unregister(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
 			   i1480_est_fd00, ARRAY_SIZE(i1480_est_fd00));
diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c
index cdd6c8e..5fad4e7 100644
--- a/drivers/uwb/umc-bus.c
+++ b/drivers/uwb/umc-bus.c
@@ -62,12 +62,12 @@
 	struct device *parent = umc->dev.parent;
 	int ret = 0;
 
-	if(down_trylock(&parent->sem))
+	if (device_trylock(parent))
 		return -EAGAIN;
 	ret = device_for_each_child(parent, parent, umc_bus_pre_reset_helper);
 	if (ret >= 0)
 		ret = device_for_each_child(parent, parent, umc_bus_post_reset_helper);
-	up(&parent->sem);
+	device_unlock(parent);
 
 	return ret;
 }
diff --git a/drivers/uwb/uwb-internal.h b/drivers/uwb/uwb-internal.h
index d5bcfc1..157485c 100644
--- a/drivers/uwb/uwb-internal.h
+++ b/drivers/uwb/uwb-internal.h
@@ -366,12 +366,12 @@
 
 static inline void uwb_dev_lock(struct uwb_dev *uwb_dev)
 {
-	down(&uwb_dev->dev.sem);
+	device_lock(&uwb_dev->dev);
 }
 
 static inline void uwb_dev_unlock(struct uwb_dev *uwb_dev)
 {
-	up(&uwb_dev->dev.sem);
+	device_unlock(&uwb_dev->dev);
 }
 
 #endif /* #ifndef __UWB_INTERNAL_H__ */
diff --git a/drivers/uwb/uwbd.c b/drivers/uwb/uwbd.c
index 5a777d8..6210fe1 100644
--- a/drivers/uwb/uwbd.c
+++ b/drivers/uwb/uwbd.c
@@ -43,7 +43,7 @@
  *
  * EVENTS
  *
- * Events have a type, a subtype, a lenght, some other stuff and the
+ * Events have a type, a subtype, a length, some other stuff and the
  * data blob, which depends on the event. The header is 'struct
  * uwb_event'; for payloads, see 'struct uwbd_evt_*'.
  *
diff --git a/drivers/uwb/wlp/sysfs.c b/drivers/uwb/wlp/sysfs.c
index 0370399..6627c94 100644
--- a/drivers/uwb/wlp/sysfs.c
+++ b/drivers/uwb/wlp/sysfs.c
@@ -615,8 +615,7 @@
 	return ret;
 }
 
-static
-struct sysfs_ops wss_sysfs_ops = {
+static const struct sysfs_ops wss_sysfs_ops = {
 	.show	= wlp_wss_attr_show,
 	.store	= wlp_wss_attr_store,
 };
diff --git a/drivers/video/68328fb.c b/drivers/video/68328fb.c
index 0b17824..2110556 100644
--- a/drivers/video/68328fb.c
+++ b/drivers/video/68328fb.c
@@ -308,7 +308,7 @@
 	 * Pseudocolor:
 	 *    uses offset = 0 && length = RAMDAC register width.
 	 *    var->{color}.offset is 0
-	 *    var->{color}.length contains widht of DAC
+	 *    var->{color}.length contains width of DAC
 	 *    cmap is not used
 	 *    RAMDAC[X] is programmed to (red, green, blue)
 	 * Truecolor:
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 5a5c303..dabe804b 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -400,9 +400,12 @@
 	  If you plan to use the LCD display with your SA-1100 system, say
 	  Y here.
 
+config HAVE_FB_IMX
+	bool
+
 config FB_IMX
 	tristate "Motorola i.MX LCD support"
-	depends on FB && (ARCH_MX1 || ARCH_MX2)
+	depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -909,6 +912,18 @@
 	  mostly initialized the card already.  It is treated as a
 	  completely dumb framebuffer device.
 
+config FB_XVR1000
+	bool "Sun XVR-1000 support"
+	depends on SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-1000 and similar
+	  graphics cards.  The driver only works on sparc64 systems where
+	  the system firmware has mostly initialized the card already.  It
+	  is treated as a completely dumb framebuffer device.
+
 config FB_PVR2
 	tristate "NEC PowerVR 2 display support"
 	depends on FB && SH_DREAMCAST
@@ -1494,7 +1509,6 @@
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
-       select FB_SOFT_CURSOR
        select I2C_ALGOBIT
        select I2C
        help
@@ -1945,6 +1959,27 @@
 	  Turn on debugging messages. Note that you can set/unset at run time
 	  through sysfs
 
+config FB_NUC900
+        bool "NUC900 LCD framebuffer support"
+        depends on FB && ARCH_W90X900
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        ---help---
+          Frame buffer driver for the built-in LCD controller in the Nuvoton
+          NUC900 processor
+
+config GPM1040A0_320X240
+        bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
+        depends on FB_NUC900
+
+config FB_NUC900_DEBUG
+        bool "NUC900 lcd debug messages"
+        depends on FB_NUC900
+        help
+          Turn on debugging messages. Note that you can set/unset at run time
+          through sysfs
+
 config FB_SM501
 	tristate "Silicon Motion SM501 framebuffer support"
 	depends on FB && MFD_SM501
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 4ecb30c..ddc2af2 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -79,6 +79,7 @@
 obj-$(CONFIG_FB_HGA)              += hgafb.o
 obj-$(CONFIG_FB_XVR500)           += sunxvr500.o
 obj-$(CONFIG_FB_XVR2500)          += sunxvr2500.o
+obj-$(CONFIG_FB_XVR1000)          += sunxvr1000.o
 obj-$(CONFIG_FB_IGA)              += igafb.o
 obj-$(CONFIG_FB_APOLLO)           += dnfb.o
 obj-$(CONFIG_FB_Q40)              += q40fb.o
@@ -129,6 +130,7 @@
 obj-$(CONFIG_FB_CARMINE)          += carminefb.o
 obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
 obj-$(CONFIG_FB_MSM)              += msm/
+obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
 
 # Platform or fallback drivers go here
 obj-$(CONFIG_FB_UVESA)            += uvesafb.o
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index 0bcc59e..43d7d50 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -1221,7 +1221,7 @@
 	printk("acornfb: freed %dK memory\n", mb_freed);
 }
 
-static int __init acornfb_probe(struct platform_device *dev)
+static int __devinit acornfb_probe(struct platform_device *dev)
 {
 	unsigned long size;
 	u_int h_sync, v_sync;
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index c343169..01554d6 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -504,7 +504,7 @@
 	.fb_ioctl 	= arcfb_ioctl,
 };
 
-static int __init arcfb_probe(struct platform_device *dev)
+static int __devinit arcfb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	int retval = -ENOMEM;
diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c
index 9fe90ce9..e70bc22 100644
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/asiliantfb.c
@@ -140,7 +140,7 @@
 
 		/* 3 <= m <= 257 */
 		if (m >= 3 && m <= 257) {
-			unsigned new_error = ((Ftarget * n) - (Fref * m)) >= 0 ?
+			unsigned new_error = Ftarget * n >= Fref * m ?
 					       ((Ftarget * n) - (Fref * m)) : ((Fref * m) - (Ftarget * n));
 			if (new_error < best_error) {
 				best_n = n;
@@ -152,7 +152,7 @@
 		else if (m <= 1028) {
 			/* remember there are still only 8-bits of precision in m, so
 			 * avoid over-optimistic error calculations */
-			unsigned new_error = ((Ftarget * n) - (Fref * (m & ~3))) >= 0 ?
+			unsigned new_error = Ftarget * n >= Fref * (m & ~3) ?
 					       ((Ftarget * n) - (Fref * (m & ~3))) : ((Fref * (m & ~3)) - (Ftarget * n));
 			if (new_error < best_error) {
 				best_n = n;
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index e49ae5ed..814312a 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -82,7 +82,6 @@
 	unsigned char *fb_buffer;	/* RGB Buffer */
 
 	dma_addr_t dma_handle;
-	int lq043_mmap;
 	int lq043_open_cnt;
 	int irq;
 	spinlock_t lock;	/* lock */
@@ -316,7 +315,6 @@
 	spin_lock(&fbi->lock);
 
 	fbi->lq043_open_cnt--;
-	fbi->lq043_mmap = 0;
 
 	if (fbi->lq043_open_cnt <= 0) {
 
@@ -374,33 +372,6 @@
 	return 0;
 }
 
-static int bfin_bf54x_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-{
-
-	struct bfin_bf54xfb_info *fbi = info->par;
-
-	if (fbi->lq043_mmap)
-		return -1;
-
-	spin_lock(&fbi->lock);
-	fbi->lq043_mmap = 1;
-	spin_unlock(&fbi->lock);
-
-	vma->vm_start = (unsigned long)(fbi->fb_buffer);
-
-	vma->vm_end = vma->vm_start + info->fix.smem_len;
-	/* For those who don't understand how mmap works, go read
-	 *   Documentation/nommu-mmap.txt.
-	 * For those that do, you will know that the VM_MAYSHARE flag
-	 * must be set in the vma->vm_flags structure on noMMU
-	 *   Other flags can be set, and are documented in
-	 *   include/linux/mm.h
-	 */
-	vma->vm_flags |=  VM_MAYSHARE | VM_SHARED;
-
-	return 0;
-}
-
 int bfin_bf54x_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 {
 	if (nocursor)
@@ -452,7 +423,6 @@
 	.fb_fillrect = cfb_fillrect,
 	.fb_copyarea = cfb_copyarea,
 	.fb_imageblit = cfb_imageblit,
-	.fb_mmap = bfin_bf54x_fb_mmap,
 	.fb_cursor = bfin_bf54x_fb_cursor,
 	.fb_setcolreg = bfin_bf54x_fb_setcolreg,
 };
diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c
index b690c26..0387236 100644
--- a/drivers/video/bfin-lq035q1-fb.c
+++ b/drivers/video/bfin-lq035q1-fb.c
@@ -22,7 +22,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
-#include <linux/dma-mapping.h>
 
 #include <asm/blackfin.h>
 #include <asm/irq.h>
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index 2549c53..5653d08 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -87,7 +87,6 @@
 	struct device *dev;
 	unsigned char *fb_buffer;	/* RGB Buffer */
 	dma_addr_t dma_handle;
-	int lq043_mmap;
 	int lq043_open_cnt;
 	int irq;
 	spinlock_t lock;	/* lock */
@@ -235,7 +234,6 @@
 	spin_lock(&fbi->lock);
 
 	fbi->lq043_open_cnt--;
-	fbi->lq043_mmap = 0;
 
 	if (fbi->lq043_open_cnt <= 0) {
 		bfin_t350mcqb_disable_ppi();
@@ -293,32 +291,6 @@
 	return 0;
 }
 
-static int bfin_t350mcqb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-{
-	struct bfin_t350mcqbfb_info *fbi = info->par;
-
-	if (fbi->lq043_mmap)
-		return -1;
-
-	spin_lock(&fbi->lock);
-	fbi->lq043_mmap = 1;
-	spin_unlock(&fbi->lock);
-
-	vma->vm_start = (unsigned long)(fbi->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET);
-
-	vma->vm_end = vma->vm_start + info->fix.smem_len;
-	/* For those who don't understand how mmap works, go read
-	 *   Documentation/nommu-mmap.txt.
-	 * For those that do, you will know that the VM_MAYSHARE flag
-	 * must be set in the vma->vm_flags structure on noMMU
-	 *   Other flags can be set, and are documented in
-	 *   include/linux/mm.h
-	 */
-	vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
-
-	return 0;
-}
-
 int bfin_t350mcqb_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 {
 	if (nocursor)
@@ -370,7 +342,6 @@
 	.fb_fillrect = cfb_fillrect,
 	.fb_copyarea = cfb_copyarea,
 	.fb_imageblit = cfb_imageblit,
-	.fb_mmap = bfin_t350mcqb_fb_mmap,
 	.fb_cursor = bfin_t350mcqb_fb_cursor,
 	.fb_setcolreg = bfin_t350mcqb_fb_setcolreg,
 };
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c
index df9ccb9..ebda687 100644
--- a/drivers/video/broadsheetfb.c
+++ b/drivers/video/broadsheetfb.c
@@ -29,11 +29,65 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/list.h>
+#include <linux/firmware.h>
 #include <linux/uaccess.h>
 
 #include <video/broadsheetfb.h>
 
-/* Display specific information */
+/* track panel specific parameters */
+struct panel_info {
+	int w;
+	int h;
+	u16 sdcfg;
+	u16 gdcfg;
+	u16 lutfmt;
+	u16 fsynclen;
+	u16 fendfbegin;
+	u16 lsynclen;
+	u16 lendlbegin;
+	u16 pixclk;
+};
+
+/* table of panel specific parameters to be indexed into by the board drivers */
+static struct panel_info panel_table[] = {
+	{	/* standard 6" on TFT backplane */
+		.w = 800,
+		.h = 600,
+		.sdcfg = (100 | (1 << 8) | (1 << 9)),
+		.gdcfg = 2,
+		.lutfmt = (4 | (1 << 7)),
+		.fsynclen = 4,
+		.fendfbegin = (10 << 8) | 4,
+		.lsynclen = 10,
+		.lendlbegin = (100 << 8) | 4,
+		.pixclk = 6,
+	},
+	{	/* custom 3.7" flexible on PET or steel */
+		.w = 320,
+		.h = 240,
+		.sdcfg = (67 | (0 << 8) | (0 << 9) | (0 << 10) | (0 << 12)),
+		.gdcfg = 3,
+		.lutfmt = (4 | (1 << 7)),
+		.fsynclen = 0,
+		.fendfbegin = (80 << 8) | 4,
+		.lsynclen = 10,
+		.lendlbegin = (80 << 8) | 20,
+		.pixclk = 14,
+	},
+	{	/* standard 9.7" on TFT backplane */
+		.w = 1200,
+		.h = 825,
+		.sdcfg = (100 | (1 << 8) | (1 << 9) | (0 << 10) | (0 << 12)),
+		.gdcfg = 2,
+		.lutfmt = (4 | (1 << 7)),
+		.fsynclen = 0,
+		.fendfbegin = (4 << 8) | 4,
+		.lsynclen = 4,
+		.lendlbegin = (60 << 8) | 10,
+		.pixclk = 3,
+	},
+};
+
 #define DPY_W 800
 #define DPY_H 600
 
@@ -62,30 +116,30 @@
 };
 
 /* main broadsheetfb functions */
-static void broadsheet_issue_data(struct broadsheetfb_par *par, u16 data)
+static void broadsheet_gpio_issue_data(struct broadsheetfb_par *par, u16 data)
 {
 	par->board->set_ctl(par, BS_WR, 0);
 	par->board->set_hdb(par, data);
 	par->board->set_ctl(par, BS_WR, 1);
 }
 
-static void broadsheet_issue_cmd(struct broadsheetfb_par *par, u16 data)
+static void broadsheet_gpio_issue_cmd(struct broadsheetfb_par *par, u16 data)
 {
 	par->board->set_ctl(par, BS_DC, 0);
-	broadsheet_issue_data(par, data);
+	broadsheet_gpio_issue_data(par, data);
 }
 
-static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data)
+static void broadsheet_gpio_send_command(struct broadsheetfb_par *par, u16 data)
 {
 	par->board->wait_for_rdy(par);
 
 	par->board->set_ctl(par, BS_CS, 0);
-	broadsheet_issue_cmd(par, data);
+	broadsheet_gpio_issue_cmd(par, data);
 	par->board->set_ctl(par, BS_DC, 1);
 	par->board->set_ctl(par, BS_CS, 1);
 }
 
-static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+static void broadsheet_gpio_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
 					int argc, u16 *argv)
 {
 	int i;
@@ -93,15 +147,43 @@
 	par->board->wait_for_rdy(par);
 
 	par->board->set_ctl(par, BS_CS, 0);
-	broadsheet_issue_cmd(par, cmd);
+	broadsheet_gpio_issue_cmd(par, cmd);
 	par->board->set_ctl(par, BS_DC, 1);
 
 	for (i = 0; i < argc; i++)
-		broadsheet_issue_data(par, argv[i]);
+		broadsheet_gpio_issue_data(par, argv[i]);
 	par->board->set_ctl(par, BS_CS, 1);
 }
 
-static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
+static void broadsheet_mmio_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+				    int argc, u16 *argv)
+{
+	int i;
+
+	par->board->mmio_write(par, BS_MMIO_CMD, cmd);
+
+	for (i = 0; i < argc; i++)
+		par->board->mmio_write(par, BS_MMIO_DATA, argv[i]);
+}
+
+static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data)
+{
+	if (par->board->mmio_write)
+		par->board->mmio_write(par, BS_MMIO_CMD, data);
+	else
+		broadsheet_gpio_send_command(par, data);
+}
+
+static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+				    int argc, u16 *argv)
+{
+	if (par->board->mmio_write)
+		broadsheet_mmio_send_cmdargs(par, cmd, argc, argv);
+	else
+		broadsheet_gpio_send_cmdargs(par, cmd, argc, argv);
+}
+
+static void broadsheet_gpio_burst_write(struct broadsheetfb_par *par, int size,
 					u16 *data)
 {
 	int i;
@@ -121,7 +203,30 @@
 	par->board->set_ctl(par, BS_CS, 1);
 }
 
-static u16 broadsheet_get_data(struct broadsheetfb_par *par)
+static void broadsheet_mmio_burst_write(struct broadsheetfb_par *par, int size,
+				   u16 *data)
+{
+	int i;
+	u16 tmp;
+
+	for (i = 0; i < size; i++) {
+		tmp = (data[i] & 0x0F) << 4;
+		tmp |= (data[i] & 0x0F00) << 4;
+		par->board->mmio_write(par, BS_MMIO_DATA, tmp);
+	}
+
+}
+
+static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
+				   u16 *data)
+{
+	if (par->board->mmio_write)
+		broadsheet_mmio_burst_write(par, size, data);
+	else
+		broadsheet_gpio_burst_write(par, size, data);
+}
+
+static u16 broadsheet_gpio_get_data(struct broadsheetfb_par *par)
 {
 	u16 res;
 	/* wait for ready to go hi. (lo is busy) */
@@ -141,7 +246,16 @@
 	return res;
 }
 
-static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
+
+static u16 broadsheet_get_data(struct broadsheetfb_par *par)
+{
+	if (par->board->mmio_read)
+		return par->board->mmio_read(par);
+	else
+		return broadsheet_gpio_get_data(par);
+}
+
+static void broadsheet_gpio_write_reg(struct broadsheetfb_par *par, u16 reg,
 					u16 data)
 {
 	/* wait for ready to go hi. (lo is busy) */
@@ -150,44 +264,541 @@
 	/* cs lo, dc lo for cmd, we lo for each data, db as usual */
 	par->board->set_ctl(par, BS_CS, 0);
 
-	broadsheet_issue_cmd(par, BS_CMD_WR_REG);
+	broadsheet_gpio_issue_cmd(par, BS_CMD_WR_REG);
 
 	par->board->set_ctl(par, BS_DC, 1);
 
-	broadsheet_issue_data(par, reg);
-	broadsheet_issue_data(par, data);
+	broadsheet_gpio_issue_data(par, reg);
+	broadsheet_gpio_issue_data(par, data);
 
 	par->board->set_ctl(par, BS_CS, 1);
 }
 
+static void broadsheet_mmio_write_reg(struct broadsheetfb_par *par, u16 reg,
+				 u16 data)
+{
+	par->board->mmio_write(par, BS_MMIO_CMD, BS_CMD_WR_REG);
+	par->board->mmio_write(par, BS_MMIO_DATA, reg);
+	par->board->mmio_write(par, BS_MMIO_DATA, data);
+
+}
+
+static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
+					u16 data)
+{
+	if (par->board->mmio_write)
+		broadsheet_mmio_write_reg(par, reg, data);
+	else
+		broadsheet_gpio_write_reg(par, reg, data);
+}
+
+static void broadsheet_write_reg32(struct broadsheetfb_par *par, u16 reg,
+					u32 data)
+{
+	broadsheet_write_reg(par, reg, cpu_to_le32(data) & 0xFFFF);
+	broadsheet_write_reg(par, reg + 2, (cpu_to_le32(data) >> 16) & 0xFFFF);
+}
+
+
 static u16 broadsheet_read_reg(struct broadsheetfb_par *par, u16 reg)
 {
-	broadsheet_send_command(par, reg);
-	msleep(100);
+	broadsheet_send_cmdargs(par, BS_CMD_RD_REG, 1, &reg);
+	par->board->wait_for_rdy(par);
 	return broadsheet_get_data(par);
 }
 
+/* functions for waveform manipulation */
+static int is_broadsheet_pll_locked(struct broadsheetfb_par *par)
+{
+	return broadsheet_read_reg(par, 0x000A) & 0x0001;
+}
+
+static int broadsheet_setup_plls(struct broadsheetfb_par *par)
+{
+	int retry_count = 0;
+	u16 tmp;
+
+	/* disable arral saemipu mode */
+	broadsheet_write_reg(par, 0x0006, 0x0000);
+
+	broadsheet_write_reg(par, 0x0010, 0x0004);
+	broadsheet_write_reg(par, 0x0012, 0x5949);
+	broadsheet_write_reg(par, 0x0014, 0x0040);
+	broadsheet_write_reg(par, 0x0016, 0x0000);
+
+	do {
+		if (retry_count++ > 100)
+			return -ETIMEDOUT;
+		mdelay(1);
+	} while (!is_broadsheet_pll_locked(par));
+
+	tmp = broadsheet_read_reg(par, 0x0006);
+	tmp &= ~0x1;
+	broadsheet_write_reg(par, 0x0006, tmp);
+
+	return 0;
+}
+
+static int broadsheet_setup_spi(struct broadsheetfb_par *par)
+{
+
+	broadsheet_write_reg(par, 0x0204, ((3 << 3) | 1));
+	broadsheet_write_reg(par, 0x0208, 0x0001);
+
+	return 0;
+}
+
+static int broadsheet_setup_spiflash(struct broadsheetfb_par *par,
+						u16 *orig_sfmcd)
+{
+
+	*orig_sfmcd = broadsheet_read_reg(par, 0x0204);
+	broadsheet_write_reg(par, 0x0208, 0);
+	broadsheet_write_reg(par, 0x0204, 0);
+	broadsheet_write_reg(par, 0x0204, ((3 << 3) | 1));
+
+	return 0;
+}
+
+static int broadsheet_spiflash_wait_for_bit(struct broadsheetfb_par *par,
+						u16 reg, int bitnum, int val,
+						int timeout)
+{
+	u16 tmp;
+
+	do {
+		tmp = broadsheet_read_reg(par, reg);
+		if (((tmp >> bitnum) & 1) == val)
+			return 0;
+		mdelay(1);
+	} while (timeout--);
+
+	return -ETIMEDOUT;
+}
+
+static int broadsheet_spiflash_write_byte(struct broadsheetfb_par *par, u8 data)
+{
+	broadsheet_write_reg(par, 0x0202, (data | 0x100));
+
+	return broadsheet_spiflash_wait_for_bit(par, 0x0206, 3, 0, 100);
+}
+
+static int broadsheet_spiflash_read_byte(struct broadsheetfb_par *par, u8 *data)
+{
+	int err;
+	u16 tmp;
+
+	broadsheet_write_reg(par, 0x0202, 0);
+
+	err = broadsheet_spiflash_wait_for_bit(par, 0x0206, 3, 0, 100);
+	if (err)
+		return err;
+
+	tmp = broadsheet_read_reg(par, 0x200);
+
+	*data = tmp & 0xFF;
+
+	return 0;
+}
+
+static int broadsheet_spiflash_wait_for_status(struct broadsheetfb_par *par,
+								int timeout)
+{
+	u8 tmp;
+	int err;
+
+	do {
+		broadsheet_write_reg(par, 0x0208, 1);
+
+		err = broadsheet_spiflash_write_byte(par, 0x05);
+		if (err)
+			goto failout;
+
+		err = broadsheet_spiflash_read_byte(par, &tmp);
+		if (err)
+			goto failout;
+
+		broadsheet_write_reg(par, 0x0208, 0);
+
+		if (!(tmp & 0x1))
+			return 0;
+
+		mdelay(5);
+	} while (timeout--);
+
+	dev_err(par->info->device, "Timed out waiting for spiflash status\n");
+	return -ETIMEDOUT;
+
+failout:
+	broadsheet_write_reg(par, 0x0208, 0);
+	return err;
+}
+
+static int broadsheet_spiflash_op_on_address(struct broadsheetfb_par *par,
+							u8 op, u32 addr)
+{
+	int i;
+	u8 tmp;
+	int err;
+
+	broadsheet_write_reg(par, 0x0208, 1);
+
+	err = broadsheet_spiflash_write_byte(par, op);
+	if (err)
+		return err;
+
+	for (i = 2; i >= 0; i--) {
+		tmp = ((addr >> (i * 8)) & 0xFF);
+		err = broadsheet_spiflash_write_byte(par, tmp);
+		if (err)
+			return err;
+	}
+
+	return err;
+}
+
+static int broadsheet_verify_spiflash(struct broadsheetfb_par *par,
+						int *flash_type)
+{
+	int err = 0;
+	u8 sig;
+
+	err = broadsheet_spiflash_op_on_address(par, 0xAB, 0x00000000);
+	if (err)
+		goto failout;
+
+	err = broadsheet_spiflash_read_byte(par, &sig);
+	if (err)
+		goto failout;
+
+	if ((sig != 0x10) && (sig != 0x11)) {
+		dev_err(par->info->device, "Unexpected flash type\n");
+		err = -EINVAL;
+		goto failout;
+	}
+
+	*flash_type = sig;
+
+failout:
+	broadsheet_write_reg(par, 0x0208, 0);
+	return err;
+}
+
+static int broadsheet_setup_for_wfm_write(struct broadsheetfb_par *par,
+					u16 *initial_sfmcd, int *flash_type)
+
+{
+	int err;
+
+	err = broadsheet_setup_plls(par);
+	if (err)
+		return err;
+
+	broadsheet_write_reg(par, 0x0106, 0x0203);
+
+	err = broadsheet_setup_spi(par);
+	if (err)
+		return err;
+
+	err = broadsheet_setup_spiflash(par, initial_sfmcd);
+	if (err)
+		return err;
+
+	return broadsheet_verify_spiflash(par, flash_type);
+}
+
+static int broadsheet_spiflash_write_control(struct broadsheetfb_par *par,
+						int mode)
+{
+	int err;
+
+	broadsheet_write_reg(par, 0x0208, 1);
+	if (mode)
+		err = broadsheet_spiflash_write_byte(par, 0x06);
+	else
+		err = broadsheet_spiflash_write_byte(par, 0x04);
+
+	broadsheet_write_reg(par, 0x0208, 0);
+	return err;
+}
+
+static int broadsheet_spiflash_erase_sector(struct broadsheetfb_par *par,
+						int addr)
+{
+	int err;
+
+	broadsheet_spiflash_write_control(par, 1);
+
+	err = broadsheet_spiflash_op_on_address(par, 0xD8, addr);
+
+	broadsheet_write_reg(par, 0x0208, 0);
+
+	if (err)
+		return err;
+
+	err = broadsheet_spiflash_wait_for_status(par, 1000);
+
+	return err;
+}
+
+static int broadsheet_spiflash_read_range(struct broadsheetfb_par *par,
+						int addr, int size, char *data)
+{
+	int err;
+	int i;
+
+	err = broadsheet_spiflash_op_on_address(par, 0x03, addr);
+	if (err)
+		goto failout;
+
+	for (i = 0; i < size; i++) {
+		err = broadsheet_spiflash_read_byte(par, &data[i]);
+		if (err)
+			goto failout;
+	}
+
+failout:
+	broadsheet_write_reg(par, 0x0208, 0);
+	return err;
+}
+
+#define BS_SPIFLASH_PAGE_SIZE 256
+static int broadsheet_spiflash_write_page(struct broadsheetfb_par *par,
+						int addr, const char *data)
+{
+	int err;
+	int i;
+
+	broadsheet_spiflash_write_control(par, 1);
+
+	err = broadsheet_spiflash_op_on_address(par, 0x02, addr);
+	if (err)
+		goto failout;
+
+	for (i = 0; i < BS_SPIFLASH_PAGE_SIZE; i++) {
+		err = broadsheet_spiflash_write_byte(par, data[i]);
+		if (err)
+			goto failout;
+	}
+
+	broadsheet_write_reg(par, 0x0208, 0);
+
+	err = broadsheet_spiflash_wait_for_status(par, 100);
+
+failout:
+	return err;
+}
+
+static int broadsheet_spiflash_write_sector(struct broadsheetfb_par *par,
+				int addr, const char *data, int sector_size)
+{
+	int i;
+	int err;
+
+	for (i = 0; i < sector_size; i += BS_SPIFLASH_PAGE_SIZE) {
+		err = broadsheet_spiflash_write_page(par, addr + i, &data[i]);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+/*
+ * The caller must guarantee that the data to be rewritten is entirely
+ * contained within this sector. That is, data_start_addr + data_len
+ * must be less than sector_start_addr + sector_size.
+ */
+static int broadsheet_spiflash_rewrite_sector(struct broadsheetfb_par *par,
+					int sector_size, int data_start_addr,
+					int data_len, const char *data)
+{
+	int err;
+	char *sector_buffer;
+	int tail_start_addr;
+	int start_sector_addr;
+
+	sector_buffer = kzalloc(sizeof(char)*sector_size, GFP_KERNEL);
+	if (!sector_buffer)
+		return -ENOMEM;
+
+	/* the start address of the sector is the 0th byte of that sector */
+	start_sector_addr = (data_start_addr / sector_size) * sector_size;
+
+	/*
+	 * check if there is head data that we need to readback into our sector
+	 * buffer first
+	 */
+	if (data_start_addr != start_sector_addr) {
+		/*
+		 * we need to read every byte up till the start address of our
+		 * data and we put it into our sector buffer.
+		 */
+		err = broadsheet_spiflash_read_range(par, start_sector_addr,
+						data_start_addr, sector_buffer);
+		if (err)
+			return err;
+	}
+
+	/* now we copy our data into the right place in the sector buffer */
+	memcpy(sector_buffer + data_start_addr, data, data_len);
+
+	/*
+	 * now we check if there is a tail section of the sector that we need to
+	 * readback.
+	 */
+	tail_start_addr = (data_start_addr + data_len) % sector_size;
+
+	if (tail_start_addr) {
+		int tail_len;
+
+		tail_len = sector_size - tail_start_addr;
+
+		/* now we read this tail into our sector buffer */
+		err = broadsheet_spiflash_read_range(par, tail_start_addr,
+			tail_len, sector_buffer + tail_start_addr);
+		if (err)
+			return err;
+	}
+
+	/* if we got here we have the full sector that we want to rewrite. */
+
+	/* first erase the sector */
+	err = broadsheet_spiflash_erase_sector(par, start_sector_addr);
+	if (err)
+		return err;
+
+	/* now write it */
+	err = broadsheet_spiflash_write_sector(par, start_sector_addr,
+					sector_buffer, sector_size);
+	return err;
+}
+
+static int broadsheet_write_spiflash(struct broadsheetfb_par *par, u32 wfm_addr,
+				const u8 *wfm, int bytecount, int flash_type)
+{
+	int sector_size;
+	int err;
+	int cur_addr;
+	int writecount;
+	int maxlen;
+	int offset = 0;
+
+	switch (flash_type) {
+	case 0x10:
+		sector_size = 32*1024;
+		break;
+	case 0x11:
+	default:
+		sector_size = 64*1024;
+		break;
+	}
+
+	while (bytecount) {
+		cur_addr = wfm_addr + offset;
+		maxlen = roundup(cur_addr, sector_size) - cur_addr;
+		writecount = min(bytecount, maxlen);
+
+		err = broadsheet_spiflash_rewrite_sector(par, sector_size,
+				cur_addr, writecount, wfm + offset);
+		if (err)
+			return err;
+
+		offset += writecount;
+		bytecount -= writecount;
+	}
+
+	return 0;
+}
+
+static int broadsheet_store_waveform_to_spiflash(struct broadsheetfb_par *par,
+						const u8 *wfm, size_t wfm_size)
+{
+	int err = 0;
+	u16 initial_sfmcd = 0;
+	int flash_type = 0;
+
+	err = broadsheet_setup_for_wfm_write(par, &initial_sfmcd, &flash_type);
+	if (err)
+		goto failout;
+
+	err = broadsheet_write_spiflash(par, 0x886, wfm, wfm_size, flash_type);
+
+failout:
+	broadsheet_write_reg(par, 0x0204, initial_sfmcd);
+	return err;
+}
+
+static ssize_t broadsheet_loadstore_waveform(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf, size_t len)
+{
+	int err;
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct broadsheetfb_par *par = info->par;
+	const struct firmware *fw_entry;
+
+	if (len < 1)
+		return -EINVAL;
+
+	err = request_firmware(&fw_entry, "broadsheet.wbf", dev);
+	if (err < 0) {
+		dev_err(dev, "Failed to get broadsheet waveform\n");
+		goto err_failed;
+	}
+
+	/* try to enforce reasonable min max on waveform */
+	if ((fw_entry->size < 8*1024) || (fw_entry->size > 64*1024)) {
+		dev_err(dev, "Invalid waveform\n");
+		err = -EINVAL;
+		goto err_failed;
+	}
+
+	mutex_lock(&(par->io_lock));
+	err = broadsheet_store_waveform_to_spiflash(par, fw_entry->data,
+							fw_entry->size);
+
+	mutex_unlock(&(par->io_lock));
+	if (err < 0) {
+		dev_err(dev, "Failed to store broadsheet waveform\n");
+		goto err_failed;
+	}
+
+	dev_info(dev, "Stored broadsheet waveform, size %zd\n", fw_entry->size);
+
+	return len;
+
+err_failed:
+	return err;
+}
+static DEVICE_ATTR(loadstore_waveform, S_IWUSR, NULL,
+			broadsheet_loadstore_waveform);
+
+/* upper level functions that manipulate the display and other stuff */
 static void __devinit broadsheet_init_display(struct broadsheetfb_par *par)
 {
 	u16 args[5];
+	int xres = par->info->var.xres;
+	int yres = par->info->var.yres;
 
-	args[0] = DPY_W;
-	args[1] = DPY_H;
-	args[2] = (100 | (1 << 8) | (1 << 9)); /* sdcfg */
-	args[3] = 2; /* gdrv cfg */
-	args[4] = (4 | (1 << 7)); /* lut index format */
+	args[0] = panel_table[par->panel_index].w;
+	args[1] = panel_table[par->panel_index].h;
+	args[2] = panel_table[par->panel_index].sdcfg;
+	args[3] = panel_table[par->panel_index].gdcfg;
+	args[4] = panel_table[par->panel_index].lutfmt;
 	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
 
 	/* did the controller really set it? */
 	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
 
-	args[0] = 4; /* fsync len */
-	args[1] = (10 << 8) | 4; /* fend/fbegin len */
-	args[2] = 10; /* line sync len */
-	args[3] = (100 << 8) | 4; /* line end/begin len */
-	args[4] = 6; /* pixel clock cfg */
+	args[0] = panel_table[par->panel_index].fsynclen;
+	args[1] = panel_table[par->panel_index].fendfbegin;
+	args[2] = panel_table[par->panel_index].lsynclen;
+	args[3] = panel_table[par->panel_index].lendlbegin;
+	args[4] = panel_table[par->panel_index].pixclk;
 	broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_TMG, 5, args);
 
+	broadsheet_write_reg32(par, 0x310, xres*yres*2);
+
 	/* setup waveform */
 	args[0] = 0x886;
 	args[1] = 0;
@@ -207,8 +818,9 @@
 	args[0] = 0x154;
 	broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
 
-	broadsheet_burst_write(par, DPY_W*DPY_H/2,
-				(u16 *) par->info->screen_base);
+	broadsheet_burst_write(par, (panel_table[par->panel_index].w *
+					panel_table[par->panel_index].h)/2,
+					(u16 *) par->info->screen_base);
 
 	broadsheet_send_command(par, BS_CMD_LD_IMG_END);
 
@@ -222,6 +834,21 @@
 	par->board->wait_for_rdy(par);
 }
 
+static void __devinit broadsheet_identify(struct broadsheetfb_par *par)
+{
+	u16 rev, prc;
+	struct device *dev = par->info->device;
+
+	rev = broadsheet_read_reg(par, BS_REG_REV);
+	prc = broadsheet_read_reg(par, BS_REG_PRC);
+	dev_info(dev, "Broadsheet Rev 0x%x, Product Code 0x%x\n", rev, prc);
+
+	if (prc != 0x0047)
+		dev_warn(dev, "Unrecognized Broadsheet Product Code\n");
+	if (rev != 0x0100)
+		dev_warn(dev, "Unrecognized Broadsheet Revision\n");
+}
+
 static void __devinit broadsheet_init(struct broadsheetfb_par *par)
 {
 	broadsheet_send_command(par, BS_CMD_INIT_SYS_RUN);
@@ -236,6 +863,7 @@
 	u16 args[5];
 	unsigned char *buf = (unsigned char *)par->info->screen_base;
 
+	mutex_lock(&(par->io_lock));
 	/* y1 must be a multiple of 4 so drop the lower bits */
 	y1 &= 0xFFFC;
 	/* y2 must be a multiple of 4 , but - 1 so up the lower bits */
@@ -265,6 +893,7 @@
 	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
 
 	par->board->wait_for_rdy(par);
+	mutex_unlock(&(par->io_lock));
 
 }
 
@@ -272,13 +901,15 @@
 {
 	u16 args[5];
 
+	mutex_lock(&(par->io_lock));
 	args[0] = 0x3 << 4;
 	broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
 
 	args[0] = 0x154;
 	broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
-	broadsheet_burst_write(par, DPY_W*DPY_H/2,
-				(u16 *) par->info->screen_base);
+	broadsheet_burst_write(par, (panel_table[par->panel_index].w *
+					panel_table[par->panel_index].h)/2,
+					(u16 *) par->info->screen_base);
 
 	broadsheet_send_command(par, BS_CMD_LD_IMG_END);
 
@@ -290,7 +921,7 @@
 	broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
 
 	par->board->wait_for_rdy(par);
-
+	mutex_unlock(&(par->io_lock));
 }
 
 /* this is called back from the deferred io workqueue */
@@ -436,6 +1067,8 @@
 	unsigned char *videomemory;
 	struct broadsheetfb_par *par;
 	int i;
+	int dpyw, dpyh;
+	int panel_index;
 
 	/* pick up board specific routines */
 	board = dev->dev.platform_data;
@@ -450,7 +1083,24 @@
 	if (!info)
 		goto err;
 
-	videomemorysize = (DPY_W*DPY_H);
+	switch (board->get_panel_type()) {
+	case 37:
+		panel_index = 1;
+		break;
+	case 97:
+		panel_index = 2;
+		break;
+	case 6:
+	default:
+		panel_index = 0;
+		break;
+	}
+
+	dpyw = panel_table[panel_index].w;
+	dpyh = panel_table[panel_index].h;
+
+	videomemorysize = roundup((dpyw*dpyh), PAGE_SIZE);
+
 	videomemory = vmalloc(videomemorysize);
 	if (!videomemory)
 		goto err_fb_rel;
@@ -460,16 +1110,25 @@
 	info->screen_base = (char *)videomemory;
 	info->fbops = &broadsheetfb_ops;
 
+	broadsheetfb_var.xres = dpyw;
+	broadsheetfb_var.yres = dpyh;
+	broadsheetfb_var.xres_virtual = dpyw;
+	broadsheetfb_var.yres_virtual = dpyh;
 	info->var = broadsheetfb_var;
+
+	broadsheetfb_fix.line_length = dpyw;
 	info->fix = broadsheetfb_fix;
 	info->fix.smem_len = videomemorysize;
 	par = info->par;
+	par->panel_index = panel_index;
 	par->info = info;
 	par->board = board;
 	par->write_reg = broadsheet_write_reg;
 	par->read_reg = broadsheet_read_reg;
 	init_waitqueue_head(&par->waitq);
 
+	mutex_init(&par->io_lock);
+
 	info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
 
 	info->fbdefio = &broadsheetfb_defio;
@@ -496,13 +1155,20 @@
 	if (retval < 0)
 		goto err_free_irq;
 
+	broadsheet_identify(par);
+
 	broadsheet_init(par);
 
 	retval = register_framebuffer(info);
 	if (retval < 0)
 		goto err_free_irq;
+
 	platform_set_drvdata(dev, info);
 
+	retval = device_create_file(&dev->dev, &dev_attr_loadstore_waveform);
+	if (retval < 0)
+		goto err_unreg_fb;
+
 	printk(KERN_INFO
 	       "fb%d: Broadsheet frame buffer, using %dK of video memory\n",
 	       info->node, videomemorysize >> 10);
@@ -510,6 +1176,8 @@
 
 	return 0;
 
+err_unreg_fb:
+	unregister_framebuffer(info);
 err_free_irq:
 	board->cleanup(par);
 err_cmap:
@@ -530,6 +1198,8 @@
 
 	if (info) {
 		struct broadsheetfb_par *par = info->par;
+
+		device_remove_file(info->dev, &dev_attr_loadstore_waveform);
 		unregister_framebuffer(info);
 		fb_deferred_io_cleanup(info);
 		par->board->cleanup(par);
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c
index 108b89e..5eb61b5 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/cobalt_lcdfb.c
@@ -287,7 +287,7 @@
 	.fb_cursor	= cobalt_lcdfb_cursor,
 };
 
-static int __init cobalt_lcdfb_probe(struct platform_device *dev)
+static int __devinit cobalt_lcdfb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	struct resource *res;
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index d25df51..581d2db 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -210,7 +210,7 @@
 	return 0;
 }
 
-static int __init efifb_probe(struct platform_device *dev)
+static int __devinit efifb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	int err;
diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
index 2735b79..6d755bb 100644
--- a/drivers/video/epson1355fb.c
+++ b/drivers/video/epson1355fb.c
@@ -602,7 +602,7 @@
 	return 0;
 }
 
-int __init epson1355fb_probe(struct platform_device *dev)
+int __devinit epson1355fb_probe(struct platform_device *dev)
 {
 	struct epson1355_par *default_par;
 	struct fb_info *info;
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 695fa01..5643a35 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -1128,7 +1128,7 @@
 	return 0;
 }
 
-static int __init gbefb_probe(struct platform_device *p_dev)
+static int __devinit gbefb_probe(struct platform_device *p_dev)
 {
 	int i, ret = 0;
 	struct fb_info *info;
diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c
index 0129c04..db9b785 100644
--- a/drivers/video/hgafb.c
+++ b/drivers/video/hgafb.c
@@ -551,7 +551,7 @@
 	 *  Initialization
 	 */
 
-static int __init hgafb_probe(struct platform_device *pdev)
+static int __devinit hgafb_probe(struct platform_device *pdev)
 {
 	struct fb_info *info;
 
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 73c83a8..bf78779 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -325,7 +325,7 @@
 	.fb_imageblit	= cfb_imageblit,
 };
 
-static int __init hitfb_probe(struct platform_device *dev)
+static int __devinit hitfb_probe(struct platform_device *dev)
 {
 	unsigned short lcdclor, ldr3, ldvndr;
 	struct fb_info *info;
diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c
index fabb0c5..8280a58 100644
--- a/drivers/video/mb862xx/mb862xxfb.c
+++ b/drivers/video/mb862xx/mb862xxfb.c
@@ -31,15 +31,6 @@
 #define CARMINE_MEM_SIZE	0x8000000
 #define DRV_NAME		"mb862xxfb"
 
-#if defined(CONFIG_LWMON5)
-static struct mb862xx_gc_mode lwmon5_gc_mode = {
-	/* Mode for Sharp LQ104V1DG61 TFT LCD Panel */
-	{ "640x480", 60, 640, 480, 40000, 48, 16, 32, 11, 96, 2, 0, 0, 0 },
-	/* 16 bits/pixel, 32MB, 100MHz, SDRAM memory mode value */
-	16, 0x2000000, GC_CCF_COT_100, 0x414fb7f2
-};
-#endif
-
 #if defined(CONFIG_SOCRATES)
 static struct mb862xx_gc_mode socrates_gc_mode = {
 	/* Mode for Prime View PM070WL4 TFT LCD Panel */
@@ -600,10 +591,6 @@
 		goto irqdisp;
 	}
 
-#if defined(CONFIG_LWMON5)
-	par->gc_mode = &lwmon5_gc_mode;
-#endif
-
 #if defined(CONFIG_SOCRATES)
 	par->gc_mode = &socrates_gc_mode;
 #endif
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c
index 01f77bc..afea9ab 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/mbx/mbxfb.c
@@ -693,7 +693,7 @@
 	unsigned long tmp;
 	int i;
 
-	/* FIXME: use platfrom specific parameters */
+	/* FIXME: use platform specific parameters */
 	/* setup SDRAM controller */
 	write_reg_dly((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS |
 		LMCFG_LMA_TS),
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index 0129f1b..b895aae 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -893,7 +893,7 @@
 }
 
 /**
- * fb_add_videomode: adds videomode entry to modelist
+ * fb_add_videomode - adds videomode entry to modelist
  * @mode: videomode to add
  * @head: struct list_head of modelist
  *
@@ -928,7 +928,7 @@
 }
 
 /**
- * fb_delete_videomode: removed videomode entry from modelist
+ * fb_delete_videomode - removed videomode entry from modelist
  * @mode: videomode to remove
  * @head: struct list_head of modelist
  *
@@ -953,7 +953,7 @@
 }
 
 /**
- * fb_destroy_modelist: destroy modelist
+ * fb_destroy_modelist - destroy modelist
  * @head: struct list_head of modelist
  */
 void fb_destroy_modelist(struct list_head *head)
@@ -968,7 +968,7 @@
 EXPORT_SYMBOL_GPL(fb_destroy_modelist);
 
 /**
- * fb_videomode_to_modelist: convert mode array to mode list
+ * fb_videomode_to_modelist - convert mode array to mode list
  * @modedb: array of struct fb_videomode
  * @num: number of entries in array
  * @head: struct list_head of modelist
diff --git a/drivers/video/nuc900fb.c b/drivers/video/nuc900fb.c
new file mode 100644
index 0000000..6bf0d46
--- /dev/null
+++ b/drivers/video/nuc900fb.c
@@ -0,0 +1,779 @@
+/*
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *  Description:
+ *    Nuvoton LCD Controller Driver
+ *  Author:
+ *    Wang Qiang (rurality.linux@gmail.com) 2009/12/11
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/wait.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ldm.h>
+#include <mach/fb.h>
+#include <mach/clkdev.h>
+
+#include "nuc900fb.h"
+
+
+/*
+ *  Initialize the nuc900 video (dual) buffer address
+ */
+static void nuc900fb_set_lcdaddr(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	void __iomem *regs = fbi->io;
+	unsigned long vbaddr1, vbaddr2;
+
+	vbaddr1  = info->fix.smem_start;
+	vbaddr2  = info->fix.smem_start;
+	vbaddr2 += info->fix.line_length * info->var.yres;
+
+	/* set frambuffer start phy addr*/
+	writel(vbaddr1, regs + REG_LCM_VA_BADDR0);
+	writel(vbaddr2, regs + REG_LCM_VA_BADDR1);
+
+	writel(fbi->regs.lcd_va_fbctrl, regs + REG_LCM_VA_FBCTRL);
+	writel(fbi->regs.lcd_va_scale, regs + REG_LCM_VA_SCALE);
+}
+
+/*
+ *	calculate divider for lcd div
+ */
+static unsigned int nuc900fb_calc_pixclk(struct nuc900fb_info *fbi,
+					 unsigned long pixclk)
+{
+	unsigned long clk = fbi->clk_rate;
+	unsigned long long div;
+
+	/* pixclk is in picseconds. our clock is in Hz*/
+	/* div = (clk * pixclk)/10^12 */
+	div = (unsigned long long)clk * pixclk;
+	div >>= 12;
+	do_div(div, 625 * 625UL * 625);
+
+	dev_dbg(fbi->dev, "pixclk %ld, divisor is %lld\n", pixclk, div);
+
+	return div;
+}
+
+/*
+ *	Check the video params of 'var'.
+ */
+static int nuc900fb_check_var(struct fb_var_screeninfo *var,
+			       struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	struct nuc900fb_mach_info *mach_info = fbi->dev->platform_data;
+	struct nuc900fb_display *display = NULL;
+	struct nuc900fb_display *default_display = mach_info->displays +
+						   mach_info->default_display;
+	int i;
+
+	dev_dbg(fbi->dev, "check_var(var=%p, info=%p)\n", var, info);
+
+	/* validate x/y resolution */
+	/* choose default mode if possible */
+	if (var->xres == default_display->xres &&
+	    var->yres == default_display->yres &&
+	    var->bits_per_pixel == default_display->bpp)
+		display = default_display;
+	else
+		for (i = 0; i < mach_info->num_displays; i++)
+			if (var->xres == mach_info->displays[i].xres &&
+			    var->yres == mach_info->displays[i].yres &&
+			    var->bits_per_pixel == mach_info->displays[i].bpp) {
+				display = mach_info->displays + i;
+				break;
+			}
+
+	if (display == NULL) {
+		printk(KERN_ERR "wrong resolution or depth %dx%d at %d bit per pixel\n",
+			var->xres, var->yres, var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	/* it should be the same size as the display */
+	var->xres_virtual	= display->xres;
+	var->yres_virtual	= display->yres;
+	var->height		= display->height;
+	var->width		= display->width;
+
+	/* copy lcd settings */
+	var->pixclock		= display->pixclock;
+	var->left_margin	= display->left_margin;
+	var->right_margin	= display->right_margin;
+	var->upper_margin	= display->upper_margin;
+	var->lower_margin	= display->lower_margin;
+	var->vsync_len		= display->vsync_len;
+	var->hsync_len		= display->hsync_len;
+
+	var->transp.offset	= 0;
+	var->transp.length	= 0;
+
+	fbi->regs.lcd_dccs = display->dccs;
+	fbi->regs.lcd_device_ctrl = display->devctl;
+	fbi->regs.lcd_va_fbctrl = display->fbctrl;
+	fbi->regs.lcd_va_scale = display->scale;
+
+	/* set R/G/B possions */
+	switch (var->bits_per_pixel) {
+	case 1:
+	case 2:
+	case 4:
+	case 8:
+	default:
+		var->red.offset 	= 0;
+		var->red.length 	= var->bits_per_pixel;
+		var->green 		= var->red;
+		var->blue		= var->red;
+		break;
+	case 12:
+		var->red.length		= 4;
+		var->green.length	= 4;
+		var->blue.length	= 4;
+		var->red.offset		= 8;
+		var->green.offset	= 4;
+		var->blue.offset	= 0;
+		break;
+	case 16:
+		var->red.length		= 5;
+		var->green.length	= 6;
+		var->blue.length	= 5;
+		var->red.offset		= 11;
+		var->green.offset	= 5;
+		var->blue.offset	= 0;
+		break;
+	case 18:
+		var->red.length		= 6;
+		var->green.length	= 6;
+		var->blue.length	= 6;
+		var->red.offset		= 12;
+		var->green.offset	= 6;
+		var->blue.offset	= 0;
+		break;
+	case 32:
+		var->red.length		= 8;
+		var->green.length	= 8;
+		var->blue.length	= 8;
+		var->red.offset		= 16;
+		var->green.offset	= 8;
+		var->blue.offset	= 0;
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ *	Calculate lcd register values from var setting & save into hw
+ */
+static void nuc900fb_calculate_lcd_regs(const struct fb_info *info,
+					struct nuc900fb_hw *regs)
+{
+	const struct fb_var_screeninfo *var = &info->var;
+	int vtt = var->height + var->upper_margin + var->lower_margin;
+	int htt = var->width + var->left_margin + var->right_margin;
+	int hsync = var->width + var->right_margin;
+	int vsync = var->height + var->lower_margin;
+
+	regs->lcd_crtc_size = LCM_CRTC_SIZE_VTTVAL(vtt) |
+			      LCM_CRTC_SIZE_HTTVAL(htt);
+	regs->lcd_crtc_dend = LCM_CRTC_DEND_VDENDVAL(var->height) |
+			      LCM_CRTC_DEND_HDENDVAL(var->width);
+	regs->lcd_crtc_hr = LCM_CRTC_HR_EVAL(var->width + 5) |
+			    LCM_CRTC_HR_SVAL(var->width + 1);
+	regs->lcd_crtc_hsync = LCM_CRTC_HSYNC_EVAL(hsync + var->hsync_len) |
+			       LCM_CRTC_HSYNC_SVAL(hsync);
+	regs->lcd_crtc_vr = LCM_CRTC_VR_EVAL(vsync + var->vsync_len) |
+			    LCM_CRTC_VR_SVAL(vsync);
+
+}
+
+/*
+ *	Activate (set) the controller from the given framebuffer
+ *	information
+ */
+static void nuc900fb_activate_var(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	void __iomem *regs = fbi->io;
+	struct fb_var_screeninfo *var = &info->var;
+	int clkdiv;
+
+	clkdiv = nuc900fb_calc_pixclk(fbi, var->pixclock) - 1;
+	if (clkdiv < 0)
+		clkdiv = 0;
+
+	nuc900fb_calculate_lcd_regs(info, &fbi->regs);
+
+	/* set the new lcd registers*/
+
+	dev_dbg(fbi->dev, "new lcd register set:\n");
+	dev_dbg(fbi->dev, "dccs       = 0x%08x\n", fbi->regs.lcd_dccs);
+	dev_dbg(fbi->dev, "dev_ctl    = 0x%08x\n", fbi->regs.lcd_device_ctrl);
+	dev_dbg(fbi->dev, "crtc_size  = 0x%08x\n", fbi->regs.lcd_crtc_size);
+	dev_dbg(fbi->dev, "crtc_dend  = 0x%08x\n", fbi->regs.lcd_crtc_dend);
+	dev_dbg(fbi->dev, "crtc_hr    = 0x%08x\n", fbi->regs.lcd_crtc_hr);
+	dev_dbg(fbi->dev, "crtc_hsync = 0x%08x\n", fbi->regs.lcd_crtc_hsync);
+	dev_dbg(fbi->dev, "crtc_vr    = 0x%08x\n", fbi->regs.lcd_crtc_vr);
+
+	writel(fbi->regs.lcd_device_ctrl, regs + REG_LCM_DEV_CTRL);
+	writel(fbi->regs.lcd_crtc_size, regs + REG_LCM_CRTC_SIZE);
+	writel(fbi->regs.lcd_crtc_dend, regs + REG_LCM_CRTC_DEND);
+	writel(fbi->regs.lcd_crtc_hr, regs + REG_LCM_CRTC_HR);
+	writel(fbi->regs.lcd_crtc_hsync, regs + REG_LCM_CRTC_HSYNC);
+	writel(fbi->regs.lcd_crtc_vr, regs + REG_LCM_CRTC_VR);
+
+	/* set lcd address pointers */
+	nuc900fb_set_lcdaddr(info);
+
+	writel(fbi->regs.lcd_dccs, regs + REG_LCM_DCCS);
+}
+
+/*
+ *      Alters the hardware state.
+ *
+ */
+static int nuc900fb_set_par(struct fb_info *info)
+{
+	struct fb_var_screeninfo *var = &info->var;
+
+	switch (var->bits_per_pixel) {
+	case 32:
+	case 24:
+	case 18:
+	case 16:
+	case 12:
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		break;
+	case 1:
+		info->fix.visual = FB_VISUAL_MONO01;
+		break;
+	default:
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+		break;
+	}
+
+	info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
+
+	/* activate this new configuration */
+	nuc900fb_activate_var(info);
+	return 0;
+}
+
+static inline unsigned int chan_to_field(unsigned int chan,
+					 struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+static int nuc900fb_setcolreg(unsigned regno,
+			       unsigned red, unsigned green, unsigned blue,
+			       unsigned transp, struct fb_info *info)
+{
+	unsigned int val;
+
+	switch (info->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		/* true-colour, use pseuo-palette */
+		if (regno < 16) {
+			u32 *pal = info->pseudo_palette;
+
+			val  = chan_to_field(red, &info->var.red);
+			val |= chan_to_field(green, &info->var.green);
+			val |= chan_to_field(blue, &info->var.blue);
+			pal[regno] = val;
+		}
+		break;
+
+	default:
+		return 1;   /* unknown type */
+	}
+	return 0;
+}
+
+/**
+ *      nuc900fb_blank
+ *
+ */
+static int nuc900fb_blank(int blank_mode, struct fb_info *info)
+{
+
+	return 0;
+}
+
+static struct fb_ops nuc900fb_ops = {
+	.owner			= THIS_MODULE,
+	.fb_check_var		= nuc900fb_check_var,
+	.fb_set_par		= nuc900fb_set_par,
+	.fb_blank		= nuc900fb_blank,
+	.fb_setcolreg		= nuc900fb_setcolreg,
+	.fb_fillrect		= cfb_fillrect,
+	.fb_copyarea		= cfb_copyarea,
+	.fb_imageblit		= cfb_imageblit,
+};
+
+
+static inline void modify_gpio(void __iomem *reg,
+			       unsigned long set, unsigned long mask)
+{
+	unsigned long tmp;
+	tmp = readl(reg) & ~mask;
+	writel(tmp | set, reg);
+}
+
+/*
+ * Initialise LCD-related registers
+ */
+static int nuc900fb_init_registers(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	struct nuc900fb_mach_info *mach_info = fbi->dev->platform_data;
+	void __iomem *regs = fbi->io;
+
+	/*reset the display engine*/
+	writel(0, regs + REG_LCM_DCCS);
+	writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_ENG_RST,
+	       regs + REG_LCM_DCCS);
+	ndelay(100);
+	writel(readl(regs + REG_LCM_DCCS) & (~LCM_DCCS_ENG_RST),
+	       regs + REG_LCM_DCCS);
+	ndelay(100);
+
+	writel(0, regs + REG_LCM_DEV_CTRL);
+
+	/* config gpio output */
+	modify_gpio(W90X900_VA_GPIO + 0x54, mach_info->gpio_dir,
+		    mach_info->gpio_dir_mask);
+	modify_gpio(W90X900_VA_GPIO + 0x58, mach_info->gpio_data,
+		    mach_info->gpio_data_mask);
+
+	return 0;
+}
+
+
+/*
+ *    Alloc the SDRAM region of NUC900 for the frame buffer.
+ *    The buffer should be a non-cached, non-buffered, memory region
+ *    to allow palette and pixel writes without flushing the cache.
+ */
+static int __init nuc900fb_map_video_memory(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	dma_addr_t map_dma;
+	unsigned long map_size = PAGE_ALIGN(info->fix.smem_len);
+
+	dev_dbg(fbi->dev, "nuc900fb_map_video_memory(fbi=%p) map_size %lu\n",
+		fbi, map_size);
+
+	info->screen_base = dma_alloc_writecombine(fbi->dev, map_size,
+							&map_dma, GFP_KERNEL);
+
+	if (!info->screen_base)
+		return -ENOMEM;
+
+	memset(info->screen_base, 0x00, map_size);
+	info->fix.smem_start = map_dma;
+
+	return 0;
+}
+
+static inline void nuc900fb_unmap_video_memory(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
+			      info->screen_base, info->fix.smem_start);
+}
+
+static irqreturn_t nuc900fb_irqhandler(int irq, void *dev_id)
+{
+	struct nuc900fb_info *fbi = dev_id;
+	void __iomem *regs = fbi->io;
+	void __iomem *irq_base = fbi->irq_base;
+	unsigned long lcdirq = readl(regs + REG_LCM_INT_CS);
+
+	if (lcdirq & LCM_INT_CS_DISP_F_STATUS) {
+		writel(readl(irq_base) | 1<<30, irq_base);
+
+		/* wait VA_EN low */
+		if ((readl(regs + REG_LCM_DCCS) &
+		    LCM_DCCS_SINGLE) == LCM_DCCS_SINGLE)
+			while ((readl(regs + REG_LCM_DCCS) &
+			       LCM_DCCS_VA_EN) == LCM_DCCS_VA_EN)
+				;
+		/* display_out-enable */
+		writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_DISP_OUT_EN,
+			regs + REG_LCM_DCCS);
+		/* va-enable*/
+		writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_VA_EN,
+			regs + REG_LCM_DCCS);
+	} else if (lcdirq & LCM_INT_CS_UNDERRUN_INT) {
+		writel(readl(irq_base) | LCM_INT_CS_UNDERRUN_INT, irq_base);
+	} else if (lcdirq & LCM_INT_CS_BUS_ERROR_INT) {
+		writel(readl(irq_base) | LCM_INT_CS_BUS_ERROR_INT, irq_base);
+	}
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+static int nuc900fb_cpufreq_transition(struct notifier_block *nb,
+				       unsigned long val, void *data)
+{
+	struct nuc900fb_info *info;
+	struct fb_info *fbinfo;
+	long delta_f;
+	info = container_of(nb, struct nuc900fb_info, freq_transition);
+	fbinfo = platform_get_drvdata(to_platform_device(info->dev));
+
+	delta_f = info->clk_rate - clk_get_rate(info->clk);
+
+	if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
+	   (val == CPUFREQ_PRECHANGE && delta_f < 0)) {
+		info->clk_rate = clk_get_rate(info->clk);
+		nuc900fb_activate_var(fbinfo);
+	}
+
+	return 0;
+}
+
+static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
+{
+	fbi->freq_transition.notifier_call = nuc900fb_cpufreq_transition;
+	return cpufreq_register_notifier(&fbi->freq_transition,
+				  CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *fbi)
+{
+	cpufreq_unregister_notifier(&fbi->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+#else
+static inline int nuc900fb_cpufreq_transition(struct notifier_block *nb,
+				       unsigned long val, void *data)
+{
+	return 0;
+}
+
+static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
+{
+	return 0;
+}
+
+static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *info)
+{
+}
+#endif
+
+static char driver_name[] = "nuc900fb";
+
+static int __devinit nuc900fb_probe(struct platform_device *pdev)
+{
+	struct nuc900fb_info *fbi;
+	struct nuc900fb_display *display;
+	struct fb_info	   *fbinfo;
+	struct nuc900fb_mach_info *mach_info;
+	struct resource *res;
+	int ret;
+	int irq;
+	int i;
+	int size;
+
+	dev_dbg(&pdev->dev, "devinit\n");
+	mach_info = pdev->dev.platform_data;
+	if (mach_info == NULL) {
+		dev_err(&pdev->dev,
+			"no platform data for lcd, cannot attach\n");
+		return -EINVAL;
+	}
+
+	if (mach_info->default_display > mach_info->num_displays) {
+		dev_err(&pdev->dev,
+			"default display No. is %d but only %d displays \n",
+			mach_info->default_display, mach_info->num_displays);
+		return -EINVAL;
+	}
+
+
+	display = mach_info->displays + mach_info->default_display;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no irq for device\n");
+		return -ENOENT;
+	}
+
+	fbinfo = framebuffer_alloc(sizeof(struct nuc900fb_info), &pdev->dev);
+	if (!fbinfo)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, fbinfo);
+
+	fbi = fbinfo->par;
+	fbi->dev = &pdev->dev;
+
+#ifdef CONFIG_CPU_NUC950
+	fbi->drv_type = LCDDRV_NUC950;
+#endif
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	size = (res->end - res->start) + 1;
+	fbi->mem = request_mem_region(res->start, size, pdev->name);
+	if (fbi->mem == NULL) {
+		dev_err(&pdev->dev, "failed to alloc memory region\n");
+		ret = -ENOENT;
+		goto free_fb;
+	}
+
+	fbi->io = ioremap(res->start, size);
+	if (fbi->io == NULL) {
+		dev_err(&pdev->dev, "ioremap() of lcd registers failed\n");
+		ret = -ENXIO;
+		goto release_mem_region;
+	}
+
+	fbi->irq_base = fbi->io + REG_LCM_INT_CS;
+
+
+	/* Stop the LCD */
+	writel(0, fbi->io + REG_LCM_DCCS);
+
+	/* fill the fbinfo*/
+	strcpy(fbinfo->fix.id, driver_name);
+	fbinfo->fix.type		= FB_TYPE_PACKED_PIXELS;
+	fbinfo->fix.type_aux		= 0;
+	fbinfo->fix.xpanstep		= 0;
+	fbinfo->fix.ypanstep		= 0;
+	fbinfo->fix.ywrapstep		= 0;
+	fbinfo->fix.accel		= FB_ACCEL_NONE;
+	fbinfo->var.nonstd		= 0;
+	fbinfo->var.activate		= FB_ACTIVATE_NOW;
+	fbinfo->var.accel_flags		= 0;
+	fbinfo->var.vmode		= FB_VMODE_NONINTERLACED;
+	fbinfo->fbops			= &nuc900fb_ops;
+	fbinfo->flags			= FBINFO_FLAG_DEFAULT;
+	fbinfo->pseudo_palette		= &fbi->pseudo_pal;
+
+	ret = request_irq(irq, nuc900fb_irqhandler, IRQF_DISABLED,
+			  pdev->name, fbinfo);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot register irq handler %d -err %d\n",
+			irq, ret);
+		ret = -EBUSY;
+		goto release_regs;
+	}
+
+	nuc900_driver_clksrc_div(&pdev->dev, "ext", 0x2);
+
+	fbi->clk = clk_get(&pdev->dev, NULL);
+	if (!fbi->clk || IS_ERR(fbi->clk)) {
+		printk(KERN_ERR "nuc900-lcd:failed to get lcd clock source\n");
+		ret = -ENOENT;
+		goto release_irq;
+	}
+
+	clk_enable(fbi->clk);
+	dev_dbg(&pdev->dev, "got and enabled clock\n");
+
+	fbi->clk_rate = clk_get_rate(fbi->clk);
+
+	/* calutate the video buffer size */
+	for (i = 0; i < mach_info->num_displays; i++) {
+		unsigned long smem_len = mach_info->displays[i].xres;
+		smem_len *= mach_info->displays[i].yres;
+		smem_len *= mach_info->displays[i].bpp;
+		smem_len >>= 3;
+		if (fbinfo->fix.smem_len < smem_len)
+			fbinfo->fix.smem_len = smem_len;
+	}
+
+	/* Initialize Video Memory */
+	ret = nuc900fb_map_video_memory(fbinfo);
+	if (ret) {
+		printk(KERN_ERR "Failed to allocate video RAM: %x\n", ret);
+		goto release_clock;
+	}
+
+	dev_dbg(&pdev->dev, "got video memory\n");
+
+	fbinfo->var.xres = display->xres;
+	fbinfo->var.yres = display->yres;
+	fbinfo->var.bits_per_pixel = display->bpp;
+
+	nuc900fb_init_registers(fbinfo);
+
+	nuc900fb_check_var(&fbinfo->var, fbinfo);
+
+	ret = nuc900fb_cpufreq_register(fbi);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register cpufreq\n");
+		goto free_video_memory;
+	}
+
+	ret = register_framebuffer(fbinfo);
+	if (ret) {
+		printk(KERN_ERR "failed to register framebuffer device: %d\n",
+			ret);
+		goto free_cpufreq;
+	}
+
+	printk(KERN_INFO "fb%d: %s frame buffer device\n",
+		fbinfo->node, fbinfo->fix.id);
+
+	return 0;
+
+free_cpufreq:
+	nuc900fb_cpufreq_deregister(fbi);
+free_video_memory:
+	nuc900fb_unmap_video_memory(fbinfo);
+release_clock:
+	clk_disable(fbi->clk);
+	clk_put(fbi->clk);
+release_irq:
+	free_irq(irq, fbi);
+release_regs:
+	iounmap(fbi->io);
+release_mem_region:
+	release_mem_region((unsigned long)fbi->mem, size);
+free_fb:
+	framebuffer_release(fbinfo);
+	return ret;
+}
+
+/*
+ * shutdown the lcd controller
+ */
+static void nuc900fb_stop_lcd(struct fb_info *info)
+{
+	struct nuc900fb_info *fbi = info->par;
+	void __iomem *regs = fbi->io;
+
+	writel((~LCM_DCCS_DISP_INT_EN) | (~LCM_DCCS_VA_EN) | (~LCM_DCCS_OSD_EN),
+		regs + REG_LCM_DCCS);
+}
+
+/*
+ *  Cleanup
+ */
+static int nuc900fb_remove(struct platform_device *pdev)
+{
+	struct fb_info *fbinfo = platform_get_drvdata(pdev);
+	struct nuc900fb_info *fbi = fbinfo->par;
+	int irq;
+
+	nuc900fb_stop_lcd(fbinfo);
+	msleep(1);
+
+	nuc900fb_unmap_video_memory(fbinfo);
+
+	iounmap(fbi->io);
+
+	irq = platform_get_irq(pdev, 0);
+	free_irq(irq, fbi);
+
+	release_resource(fbi->mem);
+	kfree(fbi->mem);
+
+	platform_set_drvdata(pdev, NULL);
+	framebuffer_release(fbinfo);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+/*
+ *	suspend and resume support for the lcd controller
+ */
+
+static int nuc900fb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct fb_info	   *fbinfo = platform_get_drvdata(dev);
+	struct nuc900fb_info *info = fbinfo->par;
+
+	nuc900fb_stop_lcd();
+	msleep(1);
+	clk_disable(info->clk);
+	return 0;
+}
+
+static int nuc900fb_resume(struct platform_device *dev)
+{
+	struct fb_info	   *fbinfo = platform_get_drvdata(dev);
+	struct nuc900fb_info *fbi = fbinfo->par;
+
+	printk(KERN_INFO "nuc900fb resume\n");
+
+	clk_enable(fbi->clk);
+	msleep(1);
+
+	nuc900fb_init_registers(fbinfo);
+	nuc900fb_activate_var(bfinfo);
+
+	return 0;
+}
+
+#else
+#define nuc900fb_suspend NULL
+#define nuc900fb_resume  NULL
+#endif
+
+static struct platform_driver nuc900fb_driver = {
+	.probe		= nuc900fb_probe,
+	.remove		= nuc900fb_remove,
+	.suspend	= nuc900fb_suspend,
+	.resume		= nuc900fb_resume,
+	.driver		= {
+		.name	= "nuc900-lcd",
+		.owner	= THIS_MODULE,
+	},
+};
+
+int __devinit nuc900fb_init(void)
+{
+	return platform_driver_register(&nuc900fb_driver);
+}
+
+static void __exit nuc900fb_cleanup(void)
+{
+	platform_driver_unregister(&nuc900fb_driver);
+}
+
+module_init(nuc900fb_init);
+module_exit(nuc900fb_cleanup);
+
+MODULE_DESCRIPTION("Framebuffer driver for the NUC900");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/nuc900fb.h b/drivers/video/nuc900fb.h
new file mode 100644
index 0000000..6c23aa3
--- /dev/null
+++ b/drivers/video/nuc900fb.h
@@ -0,0 +1,55 @@
+/*
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *   Auther:
+ *        Wang Qiang(rurality.linux@gmail.com)  2009/12/16
+ */
+
+#ifndef __NUC900FB_H
+#define __NUC900FB_H
+
+#include <mach/map.h>
+#include <mach/fb.h>
+
+enum nuc900_lcddrv_type {
+	LCDDRV_NUC910,
+	LCDDRV_NUC930,
+	LCDDRV_NUC932,
+	LCDDRV_NUC950,
+	LCDDRV_NUC960,
+};
+
+
+#define PALETTE_BUFFER_SIZE	256
+#define PALETTE_BUFF_CLEAR 	(0x80000000) /* entry is clear/invalid */
+
+struct nuc900fb_info {
+	struct device		*dev;
+	struct clk		*clk;
+
+	struct resource		*mem;
+	void __iomem		*io;
+	void __iomem		*irq_base;
+	int 			drv_type;
+	struct nuc900fb_hw	regs;
+	unsigned long		clk_rate;
+
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block	freq_transition;
+#endif
+
+	/* keep these registers in case we need to re-write palette */
+	u32			palette_buffer[PALETTE_BUFFER_SIZE];
+	u32			pseudo_pal[16];
+};
+
+int nuc900fb_init(void);
+
+#endif /* __NUC900FB_H */
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index a334839..9557f96 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -389,7 +389,7 @@
 /*
  * Configure the LCD DMA for a palette load operation and do the palette
  * downloading synchronously. We don't use the frame+palette load mode of
- * the controller, since the palette can always be downloaded seperately.
+ * the controller, since the palette can always be downloaded separately.
  */
 static void load_palette(void)
 {
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 913142d..9acef00 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -341,7 +341,7 @@
 	return manager_attr->store(manager, buf, size);
 }
 
-static struct sysfs_ops manager_sysfs_ops = {
+static const struct sysfs_ops manager_sysfs_ops = {
 	.show = manager_attr_show,
 	.store = manager_attr_store,
 };
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 0c5bea2..aed3f31 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -320,7 +320,7 @@
 	return overlay_attr->store(overlay, buf, size);
 }
 
-static struct sysfs_ops overlay_sysfs_ops = {
+static const struct sysfs_ops overlay_sysfs_ops = {
 	.show = overlay_attr_show,
 	.store = overlay_attr_store,
 };
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 36436ee..27f93aa 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -896,7 +896,7 @@
 	 * Pseudocolor:
 	 *    uses offset = 0 && length = DAC register width.
 	 *    var->{color}.offset is 0
-	 *    var->{color}.length contains widht of DAC
+	 *    var->{color}.length contains width of DAC
 	 *    cmap is not used
 	 *    DAC[X] is programmed to (red, green, blue)
 	 * Truecolor:
diff --git a/drivers/video/q40fb.c b/drivers/video/q40fb.c
index 4beac1d..de40a62 100644
--- a/drivers/video/q40fb.c
+++ b/drivers/video/q40fb.c
@@ -85,7 +85,7 @@
 	.fb_imageblit	= cfb_imageblit,
 };
 
-static int __init q40fb_probe(struct platform_device *dev)
+static int __devinit q40fb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index 0deb0a8..7b63429 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -517,12 +517,12 @@
 		src = (sy * stride) + (bpp * sx);
 	}
 
-	/* set source adress */
+	/* set source address */
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START0, (src & 0xff));
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START1, (src >> 8) & 0x00ff);
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START2, (src >> 16) & 0x00ff);
 
-	/* set destination adress */
+	/* set destination address */
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dst & 0xff));
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, (dst >> 8) & 0x00ff);
 	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, (dst >> 16) & 0x00ff);
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index aac6612..2b094de 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -1004,12 +1004,12 @@
 	return ret;
 }
 
-static int __init s3c2410fb_probe(struct platform_device *pdev)
+static int __devinit s3c2410fb_probe(struct platform_device *pdev)
 {
 	return s3c24xxfb_probe(pdev, DRV_S3C2410);
 }
 
-static int __init s3c2412fb_probe(struct platform_device *pdev)
+static int __devinit s3c2412fb_probe(struct platform_device *pdev)
 {
 	return s3c24xxfb_probe(pdev, DRV_S3C2412);
 }
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index cdaa873..e8b76d6 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -1435,7 +1435,7 @@
 	return fbi;
 }
 
-static int __init sa1100fb_probe(struct platform_device *pdev)
+static int __devinit sa1100fb_probe(struct platform_device *pdev)
 {
 	struct sa1100fb_info *fbi;
 	int ret, irq;
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
index f8601223..7a3a5e2 100644
--- a/drivers/video/sgivwfb.c
+++ b/drivers/video/sgivwfb.c
@@ -745,7 +745,7 @@
 /*
  *  Initialisation
  */
-static int __init sgivwfb_probe(struct platform_device *dev)
+static int __devinit sgivwfb_probe(struct platform_device *dev)
 {
 	struct sgivw_par *par;
 	struct fb_info *info;
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 8d7653e..bbd1dbf 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -943,7 +943,7 @@
 
 static int sh_mobile_lcdc_remove(struct platform_device *pdev);
 
-static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
+static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 {
 	struct fb_info *info;
 	struct sh_mobile_lcdc_priv *priv;
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 9d2b6bc..a531a0f 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -1891,9 +1891,6 @@
 	.fb_fillrect	= fbcon_sis_fillrect,
 	.fb_copyarea	= fbcon_sis_copyarea,
 	.fb_imageblit	= cfb_imageblit,
-#ifdef CONFIG_FB_SOFT_CURSOR
-	.fb_cursor	= soft_cursor,
-#endif
 	.fb_sync	= fbcon_sis_sync,
 #ifdef SIS_NEW_CONFIG_COMPAT
 	.fb_compat_ioctl= sisfb_ioctl,
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 35370d0e..b7dc180 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -411,7 +411,7 @@
 	struct sm501fb_par  *par = info->par;
 	struct sm501fb_info *fbi = par->info;
 	unsigned long pixclock;      /* pixelclock in Hz */
-	unsigned long sm501pixclock; /* pixelclock the 501 can achive in Hz */
+	unsigned long sm501pixclock; /* pixelclock the 501 can achieve in Hz */
 	unsigned int mem_type;
 	unsigned int clock_type;
 	unsigned int head_addr;
diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index 609d0a5..79840f1 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -1102,7 +1102,7 @@
  * detect dac type
  * prerequisite : write to FbiInitx enabled, video and fbi and pci fifo reset,
  * dram refresh disabled, FbiInit remaped.
- * TODO: mmh.. maybe i shoud put the "prerequisite" in the func ...
+ * TODO: mmh.. maybe i should put the "prerequisite" in the func ...
  */
 
 
diff --git a/drivers/video/sunxvr1000.c b/drivers/video/sunxvr1000.c
new file mode 100644
index 0000000..a8248c0
--- /dev/null
+++ b/drivers/video/sunxvr1000.c
@@ -0,0 +1,228 @@
+/* sunxvr1000.c: Sun XVR-1000 driver for sparc64 systems
+ *
+ * Copyright (C) 2010 David S. Miller (davem@davemloft.net)
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+
+struct gfb_info {
+	struct fb_info		*info;
+
+	char __iomem		*fb_base;
+	unsigned long		fb_base_phys;
+
+	struct device_node	*of_node;
+
+	unsigned int		width;
+	unsigned int		height;
+	unsigned int		depth;
+	unsigned int		fb_size;
+
+	u32			pseudo_palette[16];
+};
+
+static int __devinit gfb_get_props(struct gfb_info *gp)
+{
+	gp->width = of_getintprop_default(gp->of_node, "width", 0);
+	gp->height = of_getintprop_default(gp->of_node, "height", 0);
+	gp->depth = of_getintprop_default(gp->of_node, "depth", 32);
+
+	if (!gp->width || !gp->height) {
+		printk(KERN_ERR "gfb: Critical properties missing for %s\n",
+		       gp->of_node->full_name);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int gfb_setcolreg(unsigned regno,
+			 unsigned red, unsigned green, unsigned blue,
+			 unsigned transp, struct fb_info *info)
+{
+	u32 value;
+
+	if (regno < 16) {
+		red >>= 8;
+		green >>= 8;
+		blue >>= 8;
+
+		value = (blue << 16) | (green << 8) | red;
+		((u32 *)info->pseudo_palette)[regno] = value;
+	}
+
+	return 0;
+}
+
+static struct fb_ops gfb_ops = {
+	.owner			= THIS_MODULE,
+	.fb_setcolreg		= gfb_setcolreg,
+	.fb_fillrect		= cfb_fillrect,
+	.fb_copyarea		= cfb_copyarea,
+	.fb_imageblit		= cfb_imageblit,
+};
+
+static int __devinit gfb_set_fbinfo(struct gfb_info *gp)
+{
+	struct fb_info *info = gp->info;
+	struct fb_var_screeninfo *var = &info->var;
+
+	info->flags = FBINFO_DEFAULT;
+	info->fbops = &gfb_ops;
+	info->screen_base = gp->fb_base;
+	info->screen_size = gp->fb_size;
+
+	info->pseudo_palette = gp->pseudo_palette;
+
+	/* Fill fix common fields */
+	strlcpy(info->fix.id, "gfb", sizeof(info->fix.id));
+        info->fix.smem_start = gp->fb_base_phys;
+        info->fix.smem_len = gp->fb_size;
+        info->fix.type = FB_TYPE_PACKED_PIXELS;
+	if (gp->depth == 32 || gp->depth == 24)
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+	else
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+
+	var->xres = gp->width;
+	var->yres = gp->height;
+	var->xres_virtual = var->xres;
+	var->yres_virtual = var->yres;
+	var->bits_per_pixel = gp->depth;
+
+	var->red.offset = 0;
+	var->red.length = 8;
+	var->green.offset = 8;
+	var->green.length = 8;
+	var->blue.offset = 16;
+	var->blue.length = 8;
+	var->transp.offset = 0;
+	var->transp.length = 0;
+
+	if (fb_alloc_cmap(&info->cmap, 256, 0)) {
+		printk(KERN_ERR "gfb: Cannot allocate color map.\n");
+		return -ENOMEM;
+	}
+
+        return 0;
+}
+
+static int __devinit gfb_probe(struct of_device *op,
+			       const struct of_device_id *match)
+{
+	struct device_node *dp = op->node;
+	struct fb_info *info;
+	struct gfb_info *gp;
+	int err;
+
+	info = framebuffer_alloc(sizeof(struct gfb_info), &op->dev);
+	if (!info) {
+		printk(KERN_ERR "gfb: Cannot allocate fb_info\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	gp = info->par;
+	gp->info = info;
+	gp->of_node = dp;
+
+	gp->fb_base_phys = op->resource[6].start;
+
+	err = gfb_get_props(gp);
+	if (err)
+		goto err_release_fb;
+
+	/* Framebuffer length is the same regardless of resolution. */
+	info->fix.line_length = 16384;
+	gp->fb_size = info->fix.line_length * gp->height;
+
+	gp->fb_base = of_ioremap(&op->resource[6], 0,
+				 gp->fb_size, "gfb fb");
+	if (!gp->fb_base)
+		goto err_release_fb;
+
+	err = gfb_set_fbinfo(gp);
+	if (err)
+		goto err_unmap_fb;
+
+	printk("gfb: Found device at %s\n", dp->full_name);
+
+	err = register_framebuffer(info);
+	if (err < 0) {
+		printk(KERN_ERR "gfb: Could not register framebuffer %s\n",
+		       dp->full_name);
+		goto err_unmap_fb;
+	}
+
+	dev_set_drvdata(&op->dev, info);
+
+	return 0;
+
+err_unmap_fb:
+	of_iounmap(&op->resource[6], gp->fb_base, gp->fb_size);
+
+err_release_fb:
+        framebuffer_release(info);
+
+err_out:
+	return err;
+}
+
+static int __devexit gfb_remove(struct of_device *op)
+{
+	struct fb_info *info = dev_get_drvdata(&op->dev);
+	struct gfb_info *gp = info->par;
+
+	unregister_framebuffer(info);
+
+	iounmap(gp->fb_base);
+
+	of_iounmap(&op->resource[6], gp->fb_base, gp->fb_size);
+
+        framebuffer_release(info);
+
+	dev_set_drvdata(&op->dev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id gfb_match[] = {
+	{
+		.name = "SUNW,gfb",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ffb_match);
+
+static struct of_platform_driver gfb_driver = {
+	.name		= "gfb",
+	.match_table	= gfb_match,
+	.probe		= gfb_probe,
+	.remove		= __devexit_p(gfb_remove),
+};
+
+static int __init gfb_init(void)
+{
+	if (fb_get_options("gfb", NULL))
+		return -ENODEV;
+
+	return of_register_driver(&gfb_driver, &of_bus_type);
+}
+
+static void __exit gfb_exit(void)
+{
+	of_unregister_driver(&gfb_driver);
+}
+
+module_init(gfb_init);
+module_exit(gfb_exit);
+
+MODULE_DESCRIPTION("framebuffer driver for Sun XVR-1000 graphics");
+MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index bd37ee1..ef4128c 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -226,7 +226,7 @@
 	return 0;
 }
 
-static int __init vesafb_probe(struct platform_device *dev)
+static int __devinit vesafb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	int i, err;
diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c
index 050d432..b8ab995 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/vfb.c
@@ -479,7 +479,7 @@
      *  Initialisation
      */
 
-static int __init vfb_probe(struct platform_device *dev)
+static int __devinit vfb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	int retval = -ENOMEM;
diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
index 5b29389..76d8dae5 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/vga16fb.c
@@ -1293,7 +1293,7 @@
 }
 #endif
 
-static int __init vga16fb_probe(struct platform_device *dev)
+static int __devinit vga16fb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
 	struct vga16fb_par *par;
diff --git a/drivers/video/via/Makefile b/drivers/video/via/Makefile
index e533b4b..eeed238 100644
--- a/drivers/video/via/Makefile
+++ b/drivers/video/via/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_FB_VIA) += viafb.o
 
-viafb-y	:=viafbdev.o hw.o iface.o  via_i2c.o dvi.o lcd.o ioctl.o accel.o via_utility.o vt1636.o global.o tblDPASetting.o viamode.o tbl1636.o
+viafb-y	:=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o via_utility.o vt1636.o global.o tblDPASetting.o viamode.o tbl1636.o
diff --git a/drivers/video/via/chip.h b/drivers/video/via/chip.h
index 474f428..8c06bd3 100644
--- a/drivers/video/via/chip.h
+++ b/drivers/video/via/chip.h
@@ -107,7 +107,6 @@
 struct tmds_chip_information {
 	int tmds_chip_name;
 	int tmds_chip_slave_addr;
-	int dvi_panel_id;
 	int data_mode;
 	int output_interface;
 	int i2c_port;
@@ -142,14 +141,9 @@
 	int iga_path;
 	int h_active;
 	int v_active;
-	int bpp;
-	int refresh_rate;
-	int get_dvi_size_method;
 	int max_pixel_clock;
-	int dvi_panel_size;
-	int dvi_panel_hres;
-	int dvi_panel_vres;
-	int native_size;
+	int max_hres;
+	int max_vres;
 };
 
 struct lvds_setting_information {
@@ -160,7 +154,6 @@
 	int refresh_rate;
 	int get_lcd_size_method;
 	int lcd_panel_id;
-	int lcd_panel_size;
 	int lcd_panel_hres;
 	int lcd_panel_vres;
 	int display_method;
diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c
index 67b3693..abe59b8 100644
--- a/drivers/video/via/dvi.c
+++ b/drivers/video/via/dvi.c
@@ -23,11 +23,10 @@
 static void tmds_register_write(int index, u8 data);
 static int tmds_register_read(int index);
 static int tmds_register_read_bytes(int index, u8 *buff, int buff_len);
-static int check_reduce_blanking_mode(int mode_index,
-	int refresh_rate);
-static int dvi_get_panel_size_from_DDCv1(void);
-static int dvi_get_panel_size_from_DDCv2(void);
-static unsigned char dvi_get_panel_info(void);
+static void dvi_get_panel_size_from_DDCv1(struct tmds_chip_information
+	*tmds_chip, struct tmds_setting_information *tmds_setting);
+static void dvi_get_panel_size_from_DDCv2(struct tmds_chip_information
+	*tmds_chip, struct tmds_setting_information *tmds_setting);
 static int viafb_dvi_query_EDID(void);
 
 static int check_tmds_chip(int device_id_subaddr, int device_id)
@@ -38,23 +37,24 @@
 		return FAIL;
 }
 
-void viafb_init_dvi_size(void)
+void viafb_init_dvi_size(struct tmds_chip_information *tmds_chip,
+	struct tmds_setting_information *tmds_setting)
 {
 	DEBUG_MSG(KERN_INFO "viafb_init_dvi_size()\n");
-	DEBUG_MSG(KERN_INFO
-		"viaparinfo->tmds_setting_info->get_dvi_size_method %d\n",
-		  viaparinfo->tmds_setting_info->get_dvi_size_method);
 
-	switch (viaparinfo->tmds_setting_info->get_dvi_size_method) {
-	case GET_DVI_SIZE_BY_SYSTEM_BIOS:
+	viafb_dvi_sense();
+	switch (viafb_dvi_query_EDID()) {
+	case 1:
+		dvi_get_panel_size_from_DDCv1(tmds_chip, tmds_setting);
 		break;
-	case GET_DVI_SZIE_BY_HW_STRAPPING:
+	case 2:
+		dvi_get_panel_size_from_DDCv2(tmds_chip, tmds_setting);
 		break;
-	case GET_DVI_SIZE_BY_VGA_BIOS:
 	default:
-		dvi_get_panel_info();
+		printk(KERN_WARNING "viafb_init_dvi_size: DVI panel size undetected!\n");
 		break;
 	}
+
 	return;
 }
 
@@ -189,42 +189,14 @@
 	return 0;
 }
 
-static int check_reduce_blanking_mode(int mode_index,
-	int refresh_rate)
-{
-	if (refresh_rate != 60)
-		return false;
-
-	switch (mode_index) {
-		/* Following modes have reduce blanking mode. */
-	case VIA_RES_1360X768:
-	case VIA_RES_1400X1050:
-	case VIA_RES_1440X900:
-	case VIA_RES_1600X900:
-	case VIA_RES_1680X1050:
-	case VIA_RES_1920X1080:
-	case VIA_RES_1920X1200:
-		break;
-
-	default:
-		DEBUG_MSG(KERN_INFO
-			  "This dvi mode %d have no reduce blanking mode!\n",
-			  mode_index);
-		return false;
-	}
-
-	return true;
-}
-
 /* DVI Set Mode */
-void viafb_dvi_set_mode(int video_index, int mode_bpp, int set_iga)
+void viafb_dvi_set_mode(struct VideoModeTable *mode, int mode_bpp,
+	int set_iga)
 {
-	struct VideoModeTable *videoMode = NULL;
+	struct VideoModeTable *rb_mode;
 	struct crt_mode_table *pDviTiming;
 	unsigned long desirePixelClock, maxPixelClock;
-	int status = 0;
-	videoMode = viafb_get_modetbl_pointer(video_index);
-	pDviTiming = videoMode->crtc;
+	pDviTiming = mode->crtc;
 	desirePixelClock = pDviTiming->clk / 1000000;
 	maxPixelClock = (unsigned long)viaparinfo->
 		tmds_setting_info->max_pixel_clock;
@@ -232,20 +204,14 @@
 	DEBUG_MSG(KERN_INFO "\nDVI_set_mode!!\n");
 
 	if ((maxPixelClock != 0) && (desirePixelClock > maxPixelClock)) {
-		/*Check if reduce-blanking mode is exist */
-		status =
-		    check_reduce_blanking_mode(video_index,
-					       pDviTiming->refresh_rate);
-		if (status) {
-			video_index += 100;	/*Use reduce-blanking mode */
-			videoMode = viafb_get_modetbl_pointer(video_index);
-			pDviTiming = videoMode->crtc;
-			DEBUG_MSG(KERN_INFO
-				  "DVI use reduce blanking mode %d!!\n",
-				  video_index);
+		rb_mode = viafb_get_rb_mode(mode->crtc[0].crtc.hor_addr,
+			mode->crtc[0].crtc.ver_addr);
+		if (rb_mode) {
+			mode = rb_mode;
+			pDviTiming = rb_mode->crtc;
 		}
 	}
-	viafb_fill_crtc_timing(pDviTiming, video_index, mode_bpp / 8, set_iga);
+	viafb_fill_crtc_timing(pDviTiming, mode, mode_bpp / 8, set_iga);
 	viafb_set_output_path(DEVICE_DVI, set_iga,
 			viaparinfo->chip_info->tmds_chip_info.output_interface);
 }
@@ -350,25 +316,18 @@
 		return false;
 }
 
-/*
- *
- * int dvi_get_panel_size_from_DDCv1(void)
- *
- *     - Get Panel Size Using EDID1 Table
- *
- * Return Type:    int
- *
- */
-static int dvi_get_panel_size_from_DDCv1(void)
+/* Get Panel Size Using EDID1 Table */
+static void dvi_get_panel_size_from_DDCv1(struct tmds_chip_information
+	*tmds_chip, struct tmds_setting_information *tmds_setting)
 {
-	int i, max_h = 0, max_v = 0, tmp, restore;
+	int i, max_h = 0, tmp, restore;
 	unsigned char rData;
 	unsigned char EDID_DATA[18];
 
 	DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv1 \n");
 
-	restore = viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr;
-	viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = 0xA0;
+	restore = tmds_chip->tmds_chip_slave_addr;
+	tmds_chip->tmds_chip_slave_addr = 0xA0;
 
 	rData = tmds_register_read(0x23);
 	if (rData & 0x3C)
@@ -414,8 +373,8 @@
 				/* The first two byte must be zero. */
 				if (EDID_DATA[3] == 0xFD) {
 					/* To get max pixel clock. */
-					viaparinfo->tmds_setting_info->
-					max_pixel_clock = EDID_DATA[9] * 10;
+					tmds_setting->max_pixel_clock =
+						EDID_DATA[9] * 10;
 				}
 			}
 			break;
@@ -425,154 +384,88 @@
 		}
 	}
 
+	tmds_setting->max_hres = max_h;
 	switch (max_h) {
 	case 640:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_640X480;
+		tmds_setting->max_vres = 480;
 		break;
 	case 800:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_800X600;
+		tmds_setting->max_vres = 600;
 		break;
 	case 1024:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1024X768;
+		tmds_setting->max_vres = 768;
 		break;
 	case 1280:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1280X1024;
+		tmds_setting->max_vres = 1024;
 		break;
 	case 1400:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1400X1050;
+		tmds_setting->max_vres = 1050;
 		break;
 	case 1440:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1440X1050;
+		tmds_setting->max_vres = 1050;
 		break;
 	case 1600:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1600X1200;
+		tmds_setting->max_vres = 1200;
 		break;
 	case 1920:
-		if (max_v == 1200) {
-			viaparinfo->tmds_setting_info->dvi_panel_size =
-				VIA_RES_1920X1200;
-		} else {
-			viaparinfo->tmds_setting_info->dvi_panel_size =
-				VIA_RES_1920X1080;
-		}
-
+		tmds_setting->max_vres = 1080;
 		break;
 	default:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1024X768;
-		DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d !\
-					 set default panel size.\n", max_h);
+		DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d ! "
+					 "set default panel size.\n", max_h);
 		break;
 	}
 
 	DEBUG_MSG(KERN_INFO "DVI max pixelclock = %d\n",
-		  viaparinfo->tmds_setting_info->max_pixel_clock);
-	viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = restore;
-	return viaparinfo->tmds_setting_info->dvi_panel_size;
+		tmds_setting->max_pixel_clock);
+	tmds_chip->tmds_chip_slave_addr = restore;
 }
 
-/*
- *
- * int dvi_get_panel_size_from_DDCv2(void)
- *
- *     - Get Panel Size Using EDID2 Table
- *
- * Return Type:    int
- *
- */
-static int dvi_get_panel_size_from_DDCv2(void)
+/* Get Panel Size Using EDID2 Table */
+static void dvi_get_panel_size_from_DDCv2(struct tmds_chip_information
+	*tmds_chip, struct tmds_setting_information *tmds_setting)
 {
-	int HSize = 0, restore;
+	int restore;
 	unsigned char R_Buffer[2];
 
 	DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv2 \n");
 
-	restore = viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr;
-	viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = 0xA2;
+	restore = tmds_chip->tmds_chip_slave_addr;
+	tmds_chip->tmds_chip_slave_addr = 0xA2;
 
 	/* Horizontal: 0x76, 0x77 */
 	tmds_register_read_bytes(0x76, R_Buffer, 2);
-	HSize = R_Buffer[0];
-	HSize += R_Buffer[1] << 8;
+	tmds_setting->max_hres = R_Buffer[0] + (R_Buffer[1] << 8);
 
-	switch (HSize) {
+	switch (tmds_setting->max_hres) {
 	case 640:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_640X480;
+		tmds_setting->max_vres = 480;
 		break;
 	case 800:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_800X600;
+		tmds_setting->max_vres = 600;
 		break;
 	case 1024:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1024X768;
+		tmds_setting->max_vres = 768;
 		break;
 	case 1280:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1280X1024;
+		tmds_setting->max_vres = 1024;
 		break;
 	case 1400:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1400X1050;
+		tmds_setting->max_vres = 1050;
 		break;
 	case 1440:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1440X1050;
+		tmds_setting->max_vres = 1050;
 		break;
 	case 1600:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1600X1200;
+		tmds_setting->max_vres = 1200;
 		break;
 	default:
-		viaparinfo->tmds_setting_info->dvi_panel_size =
-			VIA_RES_1024X768;
-		DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d!\
-					set default panel size.\n", HSize);
+		DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d! "
+			"set default panel size.\n", tmds_setting->max_hres);
 		break;
 	}
 
-	viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = restore;
-	return viaparinfo->tmds_setting_info->dvi_panel_size;
-}
-
-/*
- *
- * unsigned char dvi_get_panel_info(void)
- *
- *     - Get Panel Size
- *
- * Return Type:    unsigned char
- */
-static unsigned char dvi_get_panel_info(void)
-{
-	unsigned char dvipanelsize;
-	DEBUG_MSG(KERN_INFO "dvi_get_panel_info! \n");
-
-	viafb_dvi_sense();
-	switch (viafb_dvi_query_EDID()) {
-	case 1:
-		dvi_get_panel_size_from_DDCv1();
-		break;
-	case 2:
-		dvi_get_panel_size_from_DDCv2();
-		break;
-	default:
-		break;
-	}
-
-	DEBUG_MSG(KERN_INFO "dvi panel size is %2d \n",
-		  viaparinfo->tmds_setting_info->dvi_panel_size);
-	dvipanelsize = (unsigned char)(viaparinfo->
-		tmds_setting_info->dvi_panel_size);
-	return dvipanelsize;
+	tmds_chip->tmds_chip_slave_addr = restore;
 }
 
 /* If Disable DVI, turn off pad */
diff --git a/drivers/video/via/dvi.h b/drivers/video/via/dvi.h
index e1ec37f..0dffcfd 100644
--- a/drivers/video/via/dvi.h
+++ b/drivers/video/via/dvi.h
@@ -53,12 +53,13 @@
 #define     DEV_CONNECT_DVI     0x01
 #define     DEV_CONNECT_HDMI    0x02
 
-struct VideoModeTable *viafb_get_cea_mode_tbl_pointer(int Index);
 int viafb_dvi_sense(void);
 void viafb_dvi_disable(void);
 void viafb_dvi_enable(void);
 int viafb_tmds_trasmitter_identify(void);
-void viafb_init_dvi_size(void);
-void viafb_dvi_set_mode(int video_index, int mode_bpp, int set_iga);
+void viafb_init_dvi_size(struct tmds_chip_information *tmds_chip,
+	struct tmds_setting_information *tmds_setting);
+void viafb_dvi_set_mode(struct VideoModeTable *videoMode, int mode_bpp,
+	int set_iga);
 
 #endif /* __DVI_H__ */
diff --git a/drivers/video/via/global.c b/drivers/video/via/global.c
index b675cdb..1ee511b 100644
--- a/drivers/video/via/global.c
+++ b/drivers/video/via/global.c
@@ -23,15 +23,12 @@
 int viafb_device_lcd_dualedge = STATE_OFF;
 int viafb_bus_width = 12;
 int viafb_display_hardware_layout = HW_LAYOUT_LCD_DVI;
-int viafb_memsize;
 int viafb_DeviceStatus = CRT_Device;
 int viafb_hotplug;
 int viafb_refresh = 60;
 int viafb_refresh1 = 60;
 int viafb_lcd_dsp_method = LCD_EXPANDSION;
 int viafb_lcd_mode = LCD_OPENLDI;
-int viafb_bpp = 32;
-int viafb_bpp1 = 32;
 int viafb_CRT_ON = 1;
 int viafb_DVI_ON;
 int viafb_LCD_ON ;
@@ -42,8 +39,6 @@
 int viafb_hotplug_Yres = 480;
 int viafb_hotplug_bpp = 32;
 int viafb_hotplug_refresh = 60;
-unsigned int viafb_second_offset;
-int viafb_second_size;
 int viafb_primary_dev = None_Device;
 unsigned int viafb_second_xres = 640;
 unsigned int viafb_second_yres = 480;
diff --git a/drivers/video/via/global.h b/drivers/video/via/global.h
index d69d0ca..8d95d5f 100644
--- a/drivers/video/via/global.h
+++ b/drivers/video/via/global.h
@@ -35,7 +35,6 @@
 
 #include "debug.h"
 
-#include "iface.h"
 #include "viafbdev.h"
 #include "chip.h"
 #include "accel.h"
@@ -68,8 +67,6 @@
 extern int viafb_refresh1;
 extern int viafb_lcd_dsp_method;
 extern int viafb_lcd_mode;
-extern int viafb_bpp;
-extern int viafb_bpp1;
 
 extern int viafb_CRT_ON;
 extern int viafb_hotplug_Xres;
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 3e083ff..f2583b1 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -524,7 +524,6 @@
 static void dvi_patch_skew_dvp_low(void);
 static void set_dvi_output_path(int set_iga, int output_interface);
 static void set_lcd_output_path(int set_iga, int output_interface);
-static int search_mode_setting(int ModeInfoIndex);
 static void load_fix_bit_crtc_reg(void);
 static void init_gfx_chip_info(struct pci_dev *pdev,
 				const struct pci_device_id *pdi);
@@ -686,6 +685,84 @@
 	viafb_write_reg_mask(0x71, VIACR, (pitch >> (10 - 7)) & 0x80, 0x80);
 }
 
+void viafb_set_primary_color_depth(u8 depth)
+{
+	u8 value;
+
+	DEBUG_MSG(KERN_DEBUG "viafb_set_primary_color_depth(%d)\n", depth);
+	switch (depth) {
+	case 8:
+		value = 0x00;
+		break;
+	case 15:
+		value = 0x04;
+		break;
+	case 16:
+		value = 0x14;
+		break;
+	case 24:
+		value = 0x0C;
+		break;
+	case 30:
+		value = 0x08;
+		break;
+	default:
+		printk(KERN_WARNING "viafb_set_primary_color_depth: "
+			"Unsupported depth: %d\n", depth);
+		return;
+	}
+
+	viafb_write_reg_mask(0x15, VIASR, value, 0x1C);
+}
+
+void viafb_set_secondary_color_depth(u8 depth)
+{
+	u8 value;
+
+	DEBUG_MSG(KERN_DEBUG "viafb_set_secondary_color_depth(%d)\n", depth);
+	switch (depth) {
+	case 8:
+		value = 0x00;
+		break;
+	case 16:
+		value = 0x40;
+		break;
+	case 24:
+		value = 0xC0;
+		break;
+	case 30:
+		value = 0x80;
+		break;
+	default:
+		printk(KERN_WARNING "viafb_set_secondary_color_depth: "
+			"Unsupported depth: %d\n", depth);
+		return;
+	}
+
+	viafb_write_reg_mask(0x67, VIACR, value, 0xC0);
+}
+
+static void set_color_register(u8 index, u8 red, u8 green, u8 blue)
+{
+	outb(0xFF, 0x3C6); /* bit mask of palette */
+	outb(index, 0x3C8);
+	outb(red, 0x3C9);
+	outb(green, 0x3C9);
+	outb(blue, 0x3C9);
+}
+
+void viafb_set_primary_color_register(u8 index, u8 red, u8 green, u8 blue)
+{
+	viafb_write_reg_mask(0x1A, VIASR, 0x00, 0x01);
+	set_color_register(index, red, green, blue);
+}
+
+void viafb_set_secondary_color_register(u8 index, u8 red, u8 green, u8 blue)
+{
+	viafb_write_reg_mask(0x1A, VIASR, 0x01, 0x01);
+	set_color_register(index, red, green, blue);
+}
+
 void viafb_set_output_path(int device, int set_iga, int output_interface)
 {
 	switch (device) {
@@ -710,11 +787,8 @@
 		viafb_write_reg_mask(SR16, VIASR, 0x00, BIT6);
 		break;
 	case IGA2:
-	case IGA1_IGA2:
 		viafb_write_reg_mask(CR6A, VIACR, 0xC0, BIT6 + BIT7);
 		viafb_write_reg_mask(SR16, VIASR, 0x40, BIT6);
-		if (set_iga == IGA1_IGA2)
-			viafb_write_reg_mask(CR6B, VIACR, 0x08, BIT3);
 		break;
 	}
 }
@@ -904,13 +978,6 @@
 
 		enable_second_display_channel();
 		break;
-
-	case IGA1_IGA2:
-		viafb_write_reg_mask(CR6B, VIACR, 0x08, BIT3);
-		viafb_write_reg_mask(CR6A, VIACR, 0x08, BIT3);
-
-		disable_second_display_channel();
-		break;
 	}
 
 	switch (output_interface) {
@@ -987,49 +1054,6 @@
 	}
 }
 
-/* Search Mode Index */
-static int search_mode_setting(int ModeInfoIndex)
-{
-	int i = 0;
-
-	while ((i < NUM_TOTAL_MODETABLE) &&
-			(ModeInfoIndex != CLE266Modes[i].ModeIndex))
-		i++;
-	if (i >= NUM_TOTAL_MODETABLE)
-		i = 0;
-	return i;
-
-}
-
-struct VideoModeTable *viafb_get_modetbl_pointer(int Index)
-{
-	struct VideoModeTable *TmpTbl = NULL;
-	TmpTbl = &CLE266Modes[search_mode_setting(Index)];
-	return TmpTbl;
-}
-
-struct VideoModeTable *viafb_get_cea_mode_tbl_pointer(int Index)
-{
-	struct VideoModeTable *TmpTbl = NULL;
-	int i = 0;
-	while ((i < NUM_TOTAL_CEA_MODES) &&
-			(Index != CEA_HDMI_Modes[i].ModeIndex))
-		i++;
-	if ((i < NUM_TOTAL_CEA_MODES))
-		TmpTbl = &CEA_HDMI_Modes[i];
-	 else {
-		/*Still use general timing if don't find CEA timing */
-		i = 0;
-		while ((i < NUM_TOTAL_MODETABLE) &&
-				(Index != CLE266Modes[i].ModeIndex))
-		       i++;
-		if (i >= NUM_TOTAL_MODETABLE)
-			i = 0;
-		TmpTbl = &CLE266Modes[i];
-	}
-	return TmpTbl;
-}
-
 static void load_fix_bit_crtc_reg(void)
 {
 	/* always set to 1 */
@@ -1121,15 +1145,13 @@
 	struct io_register *reg = NULL;
 
 	switch (set_iga) {
-	case IGA1_IGA2:
 	case IGA1:
 		reg_value = IGA1_FETCH_COUNT_FORMULA(h_addr, bpp_byte);
 		viafb_load_reg_num = fetch_count_reg.
 			iga1_fetch_count_reg.reg_num;
 		reg = fetch_count_reg.iga1_fetch_count_reg.reg;
 		viafb_load_reg(reg_value, viafb_load_reg_num, reg, VIASR);
-		if (set_iga == IGA1)
-			break;
+		break;
 	case IGA2:
 		reg_value = IGA2_FETCH_COUNT_FORMULA(h_addr, bpp_byte);
 		viafb_load_reg_num = fetch_count_reg.
@@ -1499,7 +1521,7 @@
 	/* H.W. Reset : ON */
 	viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
 
-	if ((set_iga == IGA1) || (set_iga == IGA1_IGA2)) {
+	if (set_iga == IGA1) {
 		/* Change D,N FOR VCLK */
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
@@ -1528,7 +1550,7 @@
 		}
 	}
 
-	if ((set_iga == IGA2) || (set_iga == IGA1_IGA2)) {
+	if (set_iga == IGA2) {
 		/* Change D,N FOR LCK */
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
@@ -1557,12 +1579,12 @@
 	viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7);
 
 	/* Reset PLL */
-	if ((set_iga == IGA1) || (set_iga == IGA1_IGA2)) {
+	if (set_iga == IGA1) {
 		viafb_write_reg_mask(SR40, VIASR, 0x02, BIT1);
 		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT1);
 	}
 
-	if ((set_iga == IGA2) || (set_iga == IGA1_IGA2)) {
+	if (set_iga == IGA2) {
 		viafb_write_reg_mask(SR40, VIASR, 0x01, BIT0);
 		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT0);
 	}
@@ -1805,47 +1827,15 @@
 	viafb_lock_crt();
 }
 
-void viafb_set_color_depth(int bpp_byte, int set_iga)
-{
-	if (set_iga == IGA1) {
-		switch (bpp_byte) {
-		case MODE_8BPP:
-			viafb_write_reg_mask(SR15, VIASR, 0x22, 0x7E);
-			break;
-		case MODE_16BPP:
-			viafb_write_reg_mask(SR15, VIASR, 0xB6, 0xFE);
-			break;
-		case MODE_32BPP:
-			viafb_write_reg_mask(SR15, VIASR, 0xAE, 0xFE);
-			break;
-		}
-	} else {
-		switch (bpp_byte) {
-		case MODE_8BPP:
-			viafb_write_reg_mask(CR67, VIACR, 0x00, BIT6 + BIT7);
-			break;
-		case MODE_16BPP:
-			viafb_write_reg_mask(CR67, VIACR, 0x40, BIT6 + BIT7);
-			break;
-		case MODE_32BPP:
-			viafb_write_reg_mask(CR67, VIACR, 0xC0, BIT6 + BIT7);
-			break;
-		}
-	}
-}
-
 void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
-	int mode_index, int bpp_byte, int set_iga)
+	struct VideoModeTable *video_mode, int bpp_byte, int set_iga)
 {
-	struct VideoModeTable *video_mode;
 	struct display_timing crt_reg;
 	int i;
 	int index = 0;
 	int h_addr, v_addr;
 	u32 pll_D_N;
 
-	video_mode = &CLE266Modes[search_mode_setting(mode_index)];
-
 	for (i = 0; i < video_mode->mode_array; i++) {
 		index = i;
 
@@ -1858,8 +1848,10 @@
 
 	/* Mode 640x480 has border, but LCD/DFP didn't have border. */
 	/* So we would delete border. */
-	if ((viafb_LCD_ON | viafb_DVI_ON) && (mode_index == VIA_RES_640X480)
-	    && (viaparinfo->crt_setting_info->refresh_rate == 60)) {
+	if ((viafb_LCD_ON | viafb_DVI_ON)
+	    && video_mode->crtc[0].crtc.hor_addr == 640
+	    && video_mode->crtc[0].crtc.ver_addr == 480
+	    && viaparinfo->crt_setting_info->refresh_rate == 60) {
 		/* The border is 8 pixels. */
 		crt_reg.hor_blank_start = crt_reg.hor_blank_start - 8;
 
@@ -1912,9 +1904,6 @@
 	    && (viaparinfo->chip_info->gfx_chip_name != UNICHROME_K400))
 		viafb_load_FIFO_reg(set_iga, h_addr, v_addr);
 
-	/* load SR Register About Memory and Color part */
-	viafb_set_color_depth(bpp_byte, set_iga);
-
 	pll_D_N = viafb_get_clk_value(crt_table[index].clk);
 	DEBUG_MSG(KERN_INFO "PLL=%x", pll_D_N);
 	viafb_set_vclock(pll_D_N, set_iga);
@@ -1956,9 +1945,6 @@
 
 		viaparinfo->tmds_setting_info->h_active = hres;
 		viaparinfo->tmds_setting_info->v_active = vres;
-		viaparinfo->tmds_setting_info->bpp = bpp;
-		viaparinfo->tmds_setting_info->refresh_rate =
-			vmode_refresh;
 
 		viaparinfo->lvds_setting_info->h_active = hres;
 		viaparinfo->lvds_setting_info->v_active = vres;
@@ -1975,9 +1961,6 @@
 		if (viaparinfo->tmds_setting_info->iga_path == IGA2) {
 			viaparinfo->tmds_setting_info->h_active = hres;
 			viaparinfo->tmds_setting_info->v_active = vres;
-			viaparinfo->tmds_setting_info->bpp = bpp;
-			viaparinfo->tmds_setting_info->refresh_rate =
-				vmode_refresh;
 		}
 
 		if (viaparinfo->lvds_setting_info->iga_path == IGA2) {
@@ -2076,9 +2059,8 @@
 
 	DEBUG_MSG(KERN_INFO "TMDS Chip = %d\n",
 		  viaparinfo->chip_info->tmds_chip_info.tmds_chip_name);
-	viaparinfo->tmds_setting_info->get_dvi_size_method =
-		GET_DVI_SIZE_BY_VGA_BIOS;
-	viafb_init_dvi_size();
+	viafb_init_dvi_size(&viaparinfo->shared->chip_info.tmds_chip_info,
+		&viaparinfo->shared->tmds_setting_info);
 }
 
 static void init_lvds_chip_info(void)
@@ -2195,28 +2177,19 @@
 	}
 }
 
-int viafb_setmode(int vmode_index, int hor_res, int ver_res, int video_bpp,
-	int vmode_index1, int hor_res1, int ver_res1, int video_bpp1)
+int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
+	struct VideoModeTable *vmode_tbl1, int video_bpp1)
 {
 	int i, j;
 	int port;
 	u8 value, index, mask;
-	struct VideoModeTable *vmode_tbl;
 	struct crt_mode_table *crt_timing;
-	struct VideoModeTable *vmode_tbl1 = NULL;
 	struct crt_mode_table *crt_timing1 = NULL;
 
-	DEBUG_MSG(KERN_INFO "Set Mode!!\n");
-	DEBUG_MSG(KERN_INFO
-		  "vmode_index=%d hor_res=%d ver_res=%d video_bpp=%d\n",
-		  vmode_index, hor_res, ver_res, video_bpp);
-
 	device_screen_off();
-	vmode_tbl = &CLE266Modes[search_mode_setting(vmode_index)];
 	crt_timing = vmode_tbl->crtc;
 
 	if (viafb_SAMM_ON == 1) {
-		vmode_tbl1 = &CLE266Modes[search_mode_setting(vmode_index1)];
 		crt_timing1 = vmode_tbl1->crtc;
 	}
 
@@ -2267,12 +2240,11 @@
 		outb(VPIT.SR[i - 1], VIASR + 1);
 	}
 
-	viafb_set_primary_address(0);
-	viafb_set_secondary_address(viafb_SAMM_ON ? viafb_second_offset : 0);
+	viafb_write_reg_mask(0x15, VIASR, 0xA2, 0xA2);
 	viafb_set_iga_path();
 
 	/* Write CRTC */
-	viafb_fill_crtc_timing(crt_timing, vmode_index, video_bpp / 8, IGA1);
+	viafb_fill_crtc_timing(crt_timing, vmode_tbl, video_bpp / 8, IGA1);
 
 	/* Write Graphic Controller */
 	for (i = 0; i < StdGR; i++) {
@@ -2292,65 +2264,25 @@
 
 	/* Update Patch Register */
 
-	if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)
-	    || (viaparinfo->chip_info->gfx_chip_name == UNICHROME_K400)) {
-		for (i = 0; i < NUM_TOTAL_PATCH_MODE; i++) {
-			if (res_patch_table[i].mode_index == vmode_index) {
-				for (j = 0;
-				     j < res_patch_table[i].table_length; j++) {
-					index =
-					    res_patch_table[i].
-					    io_reg_table[j].index;
-					port =
-					    res_patch_table[i].
-					    io_reg_table[j].port;
-					value =
-					    res_patch_table[i].
-					    io_reg_table[j].value;
-					mask =
-					    res_patch_table[i].
-					    io_reg_table[j].mask;
-					viafb_write_reg_mask(index, port, value,
-						       mask);
-				}
-			}
-		}
-	}
-
-	if (viafb_SAMM_ON == 1) {
-		if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)
-		    || (viaparinfo->chip_info->gfx_chip_name ==
-		    UNICHROME_K400)) {
-			for (i = 0; i < NUM_TOTAL_PATCH_MODE; i++) {
-				if (res_patch_table[i].mode_index ==
-				    vmode_index1) {
-					for (j = 0;
-					     j <
-					     res_patch_table[i].
-					     table_length; j++) {
-						index =
-						    res_patch_table[i].
-						    io_reg_table[j].index;
-						port =
-						    res_patch_table[i].
-						    io_reg_table[j].port;
-						value =
-						    res_patch_table[i].
-						    io_reg_table[j].value;
-						mask =
-						    res_patch_table[i].
-						    io_reg_table[j].mask;
-						viafb_write_reg_mask(index,
-							port, value, mask);
-					}
-				}
-			}
+	if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266
+	    || viaparinfo->chip_info->gfx_chip_name == UNICHROME_K400)
+	    && vmode_tbl->crtc[0].crtc.hor_addr == 1024
+	    && vmode_tbl->crtc[0].crtc.ver_addr == 768) {
+		for (j = 0; j < res_patch_table[0].table_length; j++) {
+			index = res_patch_table[0].io_reg_table[j].index;
+			port = res_patch_table[0].io_reg_table[j].port;
+			value = res_patch_table[0].io_reg_table[j].value;
+			mask = res_patch_table[0].io_reg_table[j].mask;
+			viafb_write_reg_mask(index, port, value, mask);
 		}
 	}
 
 	viafb_set_primary_pitch(viafbinfo->fix.line_length);
 	viafb_set_secondary_pitch(viafb_dual_fb ? viafbinfo1->fix.line_length
 		: viafbinfo->fix.line_length);
+	viafb_set_primary_color_depth(viaparinfo->depth);
+	viafb_set_secondary_color_depth(viafb_dual_fb ? viaparinfo1->depth
+		: viaparinfo->depth);
 	/* Update Refresh Rate Setting */
 
 	/* Clear On Screen */
@@ -2359,11 +2291,11 @@
 	if (viafb_CRT_ON) {
 		if (viafb_SAMM_ON && (viaparinfo->crt_setting_info->iga_path ==
 			IGA2)) {
-			viafb_fill_crtc_timing(crt_timing1, vmode_index1,
+			viafb_fill_crtc_timing(crt_timing1, vmode_tbl1,
 				video_bpp1 / 8,
 				viaparinfo->crt_setting_info->iga_path);
 		} else {
-			viafb_fill_crtc_timing(crt_timing, vmode_index,
+			viafb_fill_crtc_timing(crt_timing, vmode_tbl,
 				video_bpp / 8,
 				viaparinfo->crt_setting_info->iga_path);
 		}
@@ -2373,7 +2305,7 @@
 		/* Patch if set_hres is not 8 alignment (1366) to viafb_setmode
 		to 8 alignment (1368),there is several pixels (2 pixels)
 		on right side of screen. */
-		if (hor_res % 8) {
+		if (vmode_tbl->crtc[0].crtc.hor_addr % 8) {
 			viafb_unlock_crt();
 			viafb_write_reg(CR02, VIACR,
 				viafb_read_reg(VIACR, CR02) - 1);
@@ -2384,14 +2316,14 @@
 	if (viafb_DVI_ON) {
 		if (viafb_SAMM_ON &&
 			(viaparinfo->tmds_setting_info->iga_path == IGA2)) {
-			viafb_dvi_set_mode(viafb_get_mode_index
+			viafb_dvi_set_mode(viafb_get_mode
 				     (viaparinfo->tmds_setting_info->h_active,
 				      viaparinfo->tmds_setting_info->
 				      v_active),
 				     video_bpp1, viaparinfo->
 				     tmds_setting_info->iga_path);
 		} else {
-			viafb_dvi_set_mode(viafb_get_mode_index
+			viafb_dvi_set_mode(viafb_get_mode
 				     (viaparinfo->tmds_setting_info->h_active,
 				      viaparinfo->
 				      tmds_setting_info->v_active),
@@ -2445,8 +2377,8 @@
 
 	/* If set mode normally, save resolution information for hot-plug . */
 	if (!viafb_hotplug) {
-		viafb_hotplug_Xres = hor_res;
-		viafb_hotplug_Yres = ver_res;
+		viafb_hotplug_Xres = vmode_tbl->crtc[0].crtc.hor_addr;
+		viafb_hotplug_Yres = vmode_tbl->crtc[0].crtc.ver_addr;
 		viafb_hotplug_bpp = video_bpp;
 		viafb_hotplug_refresh = viafb_refresh;
 
@@ -2706,13 +2638,11 @@
 
 /*According var's xres, yres fill var's other timing information*/
 void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
-			  int mode_index)
+	struct VideoModeTable *vmode_tbl)
 {
-	struct VideoModeTable *vmode_tbl = NULL;
 	struct crt_mode_table *crt_timing = NULL;
 	struct display_timing crt_reg;
 	int i = 0, index = 0;
-	vmode_tbl = &CLE266Modes[search_mode_setting(mode_index)];
 	crt_timing = vmode_tbl->crtc;
 	for (i = 0; i < vmode_tbl->mode_array; i++) {
 		index = i;
@@ -2721,36 +2651,6 @@
 	}
 
 	crt_reg = crt_timing[index].crtc;
-	switch (var->bits_per_pixel) {
-	case 8:
-		var->red.offset = 0;
-		var->green.offset = 0;
-		var->blue.offset = 0;
-		var->red.length = 6;
-		var->green.length = 6;
-		var->blue.length = 6;
-		break;
-	case 16:
-		var->red.offset = 11;
-		var->green.offset = 5;
-		var->blue.offset = 0;
-		var->red.length = 5;
-		var->green.length = 6;
-		var->blue.length = 5;
-		break;
-	case 32:
-		var->red.offset = 16;
-		var->green.offset = 8;
-		var->blue.offset = 0;
-		var->red.length = 8;
-		var->green.length = 8;
-		var->blue.length = 8;
-		break;
-	default:
-		/* never happed, put here to keep consistent */
-		break;
-	}
-
 	var->pixclock = viafb_get_pixclock(var->xres, var->yres, refresh);
 	var->left_margin =
 	    crt_reg.hor_total - (crt_reg.hor_sync_start + crt_reg.hor_sync_end);
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index b874d95..12ef32d 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -22,6 +22,7 @@
 #ifndef __HW_H__
 #define __HW_H__
 
+#include "viamode.h"
 #include "global.h"
 
 /***************************************************
@@ -862,8 +863,6 @@
 };
 
 extern unsigned int viafb_second_virtual_xres;
-extern unsigned int viafb_second_offset;
-extern int viafb_second_size;
 extern int viafb_SAMM_ON;
 extern int viafb_dual_fb;
 extern int viafb_LCD2_ON;
@@ -874,8 +873,9 @@
 void viafb_write_reg_mask(u8 index, int io_port, u8 data, u8 mask);
 void viafb_set_output_path(int device, int set_iga,
 	int output_interface);
+
 void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
-		      int mode_index, int bpp_byte, int set_iga);
+	struct VideoModeTable *video_mode, int bpp_byte, int set_iga);
 
 void viafb_set_vclock(u32 CLK, int set_iga);
 void viafb_load_reg(int timing_value, int viafb_load_reg_num,
@@ -891,16 +891,15 @@
 void viafb_unlock_crt(void);
 void viafb_load_fetch_count_reg(int h_addr, int bpp_byte, int set_iga);
 void viafb_write_regx(struct io_reg RegTable[], int ItemNum);
-struct VideoModeTable *viafb_get_modetbl_pointer(int Index);
 u32 viafb_get_clk_value(int clk);
 void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active);
-void viafb_set_color_depth(int bpp_byte, int set_iga);
 void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
 					*p_gfx_dpa_setting);
 
-int viafb_setmode(int vmode_index, int hor_res, int ver_res,
-	    int video_bpp, int vmode_index1, int hor_res1,
-	    int ver_res1, int video_bpp1);
+int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
+	struct VideoModeTable *vmode_tbl1, int video_bpp1);
+void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
+	struct VideoModeTable *vmode_tbl);
 void viafb_init_chip_info(struct pci_dev *pdev,
 			  const struct pci_device_id *pdi);
 void viafb_init_dac(int set_iga);
@@ -915,6 +914,8 @@
 void viafb_set_secondary_address(u32 addr);
 void viafb_set_primary_pitch(u32 pitch);
 void viafb_set_secondary_pitch(u32 pitch);
+void viafb_set_primary_color_register(u8 index, u8 red, u8 green, u8 blue);
+void viafb_set_secondary_color_register(u8 index, u8 red, u8 green, u8 blue);
 void viafb_get_fb_info(unsigned int *fb_base, unsigned int *fb_len);
 
 #endif /* __HW_H__ */
diff --git a/drivers/video/via/iface.c b/drivers/video/via/iface.c
deleted file mode 100644
index 1570636..0000000
--- a/drivers/video/via/iface.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
- * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation;
- * either version 2, or (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
- * the implied warranty of MERCHANTABILITY or FITNESS FOR
- * A PARTICULAR PURPOSE.See the GNU General Public License
- * for more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include "global.h"
-
-/* Get frame buffer size from VGA BIOS */
-
-unsigned int viafb_get_memsize(void)
-{
-	unsigned int m;
-
-	/* If memory size provided by user */
-	if (viafb_memsize)
-		m = viafb_memsize * Mb;
-	else {
-		m = (unsigned int)viafb_read_reg(VIASR, SR39);
-		m = m * (4 * Mb);
-
-		if ((m < (16 * Mb)) || (m > (64 * Mb)))
-			m = 16 * Mb;
-	}
-	DEBUG_MSG(KERN_INFO "framebuffer size = %d Mb\n", m / Mb);
-	return m;
-}
-
-/* Get Video Buffer Starting Physical Address(back door)*/
-
-unsigned long viafb_get_videobuf_addr(void)
-{
-	struct pci_dev *pdev = NULL;
-	unsigned char sys_mem;
-	unsigned char video_mem;
-	unsigned long sys_mem_size;
-	unsigned long video_mem_size;
-	/*system memory = 256 MB, video memory 64 MB */
-	unsigned long vmem_starting_adr = 0x0C000000;
-
-	pdev =
-	    (struct pci_dev *)pci_get_device(VIA_K800_BRIDGE_VID,
-					     VIA_K800_BRIDGE_DID, NULL);
-	if (pdev != NULL) {
-		pci_read_config_byte(pdev, VIA_K800_SYSTEM_MEMORY_REG,
-				     &sys_mem);
-		pci_read_config_byte(pdev, VIA_K800_VIDEO_MEMORY_REG,
-				     &video_mem);
-		video_mem = (video_mem & 0x70) >> 4;
-		sys_mem_size = ((unsigned long)sys_mem) << 24;
-		if (video_mem != 0)
-			video_mem_size = (1 << (video_mem)) * 1024 * 1024;
-		else
-			video_mem_size = 0;
-
-		vmem_starting_adr = sys_mem_size - video_mem_size;
-		pci_dev_put(pdev);
-	}
-
-	DEBUG_MSG(KERN_INFO "Video Memory Starting Address = %lx \n",
-		  vmem_starting_adr);
-	return vmem_starting_adr;
-}
diff --git a/drivers/video/via/iface.h b/drivers/video/via/iface.h
deleted file mode 100644
index 790ec3e..0000000
--- a/drivers/video/via/iface.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
- * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation;
- * either version 2, or (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
- * the implied warranty of MERCHANTABILITY or FITNESS FOR
- * A PARTICULAR PURPOSE.See the GNU General Public License
- * for more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __IFACE_H__
-#define __IFACE_H__
-
-#define Kb  (1024)
-#define Mb  (Kb*Kb)
-
-#define VIA_K800_BRIDGE_VID         0x1106
-#define VIA_K800_BRIDGE_DID         0x3204
-
-#define VIA_K800_SYSTEM_MEMORY_REG  0x47
-#define VIA_K800_VIDEO_MEMORY_REG   0xA1
-
-extern int viafb_memsize;
-unsigned int viafb_get_memsize(void);
-unsigned long viafb_get_videobuf_addr(void);
-
-#endif /* __IFACE_H__ */
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 09353e2b..1b1ccdc 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -22,25 +22,7 @@
 #include "global.h"
 #include "lcdtbl.h"
 
-static struct iga2_shadow_crtc_timing iga2_shadow_crtc_reg = {
-	/* IGA2 Shadow Horizontal Total */
-	{IGA2_SHADOW_HOR_TOTAL_REG_NUM, {{CR6D, 0, 7}, {CR71, 3, 3} } },
-	/* IGA2 Shadow Horizontal Blank End */
-	{IGA2_SHADOW_HOR_BLANK_END_REG_NUM, {{CR6E, 0, 7} } },
-	/* IGA2 Shadow Vertical Total */
-	{IGA2_SHADOW_VER_TOTAL_REG_NUM, {{CR6F, 0, 7}, {CR71, 0, 2} } },
-	/* IGA2 Shadow Vertical Addressable Video */
-	{IGA2_SHADOW_VER_ADDR_REG_NUM, {{CR70, 0, 7}, {CR71, 4, 6} } },
-	/* IGA2 Shadow Vertical Blank Start */
-	{IGA2_SHADOW_VER_BLANK_START_REG_NUM,
-	 {{CR72, 0, 7}, {CR74, 4, 6} } },
-	/* IGA2 Shadow Vertical Blank End */
-	{IGA2_SHADOW_VER_BLANK_END_REG_NUM, {{CR73, 0, 7}, {CR74, 0, 2} } },
-	/* IGA2 Shadow Vertical Sync Start */
-	{IGA2_SHADOW_VER_SYNC_START_REG_NUM, {{CR75, 0, 7}, {CR76, 4, 6} } },
-	/* IGA2 Shadow Vertical Sync End */
-	{IGA2_SHADOW_VER_SYNC_END_REG_NUM, {{CR76, 0, 3} } }
-};
+#define viafb_compact_res(x, y) (((x)<<16)|(y))
 
 static struct _lcd_scaling_factor lcd_scaling_factor = {
 	/* LCD Horizontal Scaling Factor Register */
@@ -59,16 +41,10 @@
 
 static int check_lvds_chip(int device_id_subaddr, int device_id);
 static bool lvds_identify_integratedlvds(void);
-static int fp_id_to_vindex(int panel_id);
+static void fp_id_to_vindex(int panel_id);
 static int lvds_register_read(int index);
 static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 		      int panel_vres);
-static void load_lcd_k400_patch_tbl(int set_hres, int set_vres,
-	int panel_id);
-static void load_lcd_p880_patch_tbl(int set_hres, int set_vres,
-	int panel_id);
-static void load_lcd_patch_regs(int set_hres, int set_vres,
-	int panel_id, int set_iga);
 static void via_pitch_alignment_patch_lcd(
 	struct lvds_setting_information *plvds_setting_info,
 				   struct lvds_chip_information
@@ -98,8 +74,6 @@
 static struct display_timing lcd_centering_timging(struct display_timing
 					    mode_crt_reg,
 					   struct display_timing panel_crt_reg);
-static void load_crtc_shadow_timing(struct display_timing mode_timing,
-			     struct display_timing panel_timing);
 static void viafb_load_scaling_factor_for_p4m900(int set_hres,
 	int set_vres, int panel_hres, int panel_vres);
 
@@ -125,33 +99,24 @@
 		break;
 	case GET_LCD_SIZE_BY_VGA_BIOS:
 		DEBUG_MSG(KERN_INFO "Get LCD Size method by VGA BIOS !!\n");
-		viaparinfo->lvds_setting_info->lcd_panel_size =
-		    fp_id_to_vindex(viafb_lcd_panel_id);
+		fp_id_to_vindex(viafb_lcd_panel_id);
 		DEBUG_MSG(KERN_INFO "LCD Panel_ID = %d\n",
 			  viaparinfo->lvds_setting_info->lcd_panel_id);
-		DEBUG_MSG(KERN_INFO "LCD Panel Size = %d\n",
-			  viaparinfo->lvds_setting_info->lcd_panel_size);
 		break;
 	case GET_LCD_SIZE_BY_USER_SETTING:
 		DEBUG_MSG(KERN_INFO "Get LCD Size method by user setting !!\n");
-		viaparinfo->lvds_setting_info->lcd_panel_size =
-		    fp_id_to_vindex(viafb_lcd_panel_id);
+		fp_id_to_vindex(viafb_lcd_panel_id);
 		DEBUG_MSG(KERN_INFO "LCD Panel_ID = %d\n",
 			  viaparinfo->lvds_setting_info->lcd_panel_id);
-		DEBUG_MSG(KERN_INFO "LCD Panel Size = %d\n",
-			  viaparinfo->lvds_setting_info->lcd_panel_size);
 		break;
 	default:
 		DEBUG_MSG(KERN_INFO "viafb_init_lcd_size fail\n");
 		viaparinfo->lvds_setting_info->lcd_panel_id =
 			LCD_PANEL_ID1_800X600;
-		viaparinfo->lvds_setting_info->lcd_panel_size =
-		    fp_id_to_vindex(LCD_PANEL_ID1_800X600);
+		fp_id_to_vindex(LCD_PANEL_ID1_800X600);
 	}
 	viaparinfo->lvds_setting_info2->lcd_panel_id =
 		viaparinfo->lvds_setting_info->lcd_panel_id;
-	viaparinfo->lvds_setting_info2->lcd_panel_size =
-		viaparinfo->lvds_setting_info->lcd_panel_size;
 	viaparinfo->lvds_setting_info2->lcd_panel_hres =
 		viaparinfo->lvds_setting_info->lcd_panel_hres;
 	viaparinfo->lvds_setting_info2->lcd_panel_vres =
@@ -171,13 +136,13 @@
 		if (viaparinfo->chip_info->lvds_chip_info.lvds_chip_name) {
 			viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name =
 			    INTEGRATED_LVDS;
-			DEBUG_MSG(KERN_INFO "Support two dual channel LVDS!\
-				  (Internal LVDS + External LVDS)\n");
+			DEBUG_MSG(KERN_INFO "Support two dual channel LVDS! "
+				  "(Internal LVDS + External LVDS)\n");
 		} else {
 			viaparinfo->chip_info->lvds_chip_info.lvds_chip_name =
 			    INTEGRATED_LVDS;
-			DEBUG_MSG(KERN_INFO "Not found external LVDS,\
-				  so can't support two dual channel LVDS!\n");
+			DEBUG_MSG(KERN_INFO "Not found external LVDS, "
+				  "so can't support two dual channel LVDS!\n");
 		}
 	} else if (viafb_display_hardware_layout == HW_LAYOUT_LCD1_LCD2) {
 		/* Two single channel LCD (Internal LVDS + Internal LVDS): */
@@ -185,8 +150,8 @@
 		INTEGRATED_LVDS;
 		viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name =
 			INTEGRATED_LVDS;
-		DEBUG_MSG(KERN_INFO "Support two single channel LVDS!\
-			  (Internal LVDS + Internal LVDS)\n");
+		DEBUG_MSG(KERN_INFO "Support two single channel LVDS! "
+			  "(Internal LVDS + Internal LVDS)\n");
 	} else if (viafb_display_hardware_layout != HW_LAYOUT_DVI_ONLY) {
 		/* If we have found external LVDS, just use it,
 		   otherwise, we will use internal LVDS as default. */
@@ -248,7 +213,7 @@
 	return FAIL;
 }
 
-static int fp_id_to_vindex(int panel_id)
+static void fp_id_to_vindex(int panel_id)
 {
 	DEBUG_MSG(KERN_INFO "fp_get_panel_id()\n");
 
@@ -264,7 +229,6 @@
 			LCD_PANEL_ID0_640X480;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_640X480;
 		break;
 	case 0x1:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 800;
@@ -273,7 +237,6 @@
 			LCD_PANEL_ID1_800X600;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_800X600;
 		break;
 	case 0x2:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -282,7 +245,6 @@
 			LCD_PANEL_ID2_1024X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1024X768;
 		break;
 	case 0x3:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -291,7 +253,6 @@
 			LCD_PANEL_ID3_1280X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1280X768;
 		break;
 	case 0x4:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -300,7 +261,6 @@
 			LCD_PANEL_ID4_1280X1024;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1280X1024;
 		break;
 	case 0x5:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1400;
@@ -309,7 +269,6 @@
 			LCD_PANEL_ID5_1400X1050;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1400X1050;
 		break;
 	case 0x6:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1600;
@@ -318,7 +277,6 @@
 			LCD_PANEL_ID6_1600X1200;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1600X1200;
 		break;
 	case 0x8:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 800;
@@ -327,7 +285,6 @@
 			LCD_PANEL_IDA_800X480;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_800X480;
 		break;
 	case 0x9:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -336,7 +293,6 @@
 			LCD_PANEL_ID2_1024X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1024X768;
 		break;
 	case 0xA:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -345,7 +301,6 @@
 			LCD_PANEL_ID2_1024X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1024X768;
 		break;
 	case 0xB:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -354,7 +309,6 @@
 			LCD_PANEL_ID2_1024X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1024X768;
 		break;
 	case 0xC:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -363,7 +317,6 @@
 			LCD_PANEL_ID3_1280X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1280X768;
 		break;
 	case 0xD:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -372,7 +325,6 @@
 			LCD_PANEL_ID4_1280X1024;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1280X1024;
 		break;
 	case 0xE:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1400;
@@ -381,7 +333,6 @@
 			LCD_PANEL_ID5_1400X1050;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1400X1050;
 		break;
 	case 0xF:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1600;
@@ -390,7 +341,6 @@
 			LCD_PANEL_ID6_1600X1200;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1600X1200;
 		break;
 	case 0x10:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1366;
@@ -399,7 +349,6 @@
 			LCD_PANEL_ID7_1366X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1368X768;
 		break;
 	case 0x11:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1024;
@@ -408,7 +357,6 @@
 			LCD_PANEL_ID8_1024X600;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1024X600;
 		break;
 	case 0x12:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -417,7 +365,6 @@
 			LCD_PANEL_ID3_1280X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1280X768;
 		break;
 	case 0x13:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -426,7 +373,6 @@
 			LCD_PANEL_ID9_1280X800;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_1280X800;
 		break;
 	case 0x14:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1360;
@@ -435,7 +381,6 @@
 			LCD_PANEL_IDB_1360X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1360X768;
 		break;
 	case 0x15:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 1280;
@@ -444,7 +389,6 @@
 			LCD_PANEL_ID3_1280X768;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 1;
 		viaparinfo->lvds_setting_info->LCDDithering = 0;
-		return VIA_RES_1280X768;
 		break;
 	case 0x16:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 480;
@@ -453,7 +397,6 @@
 			LCD_PANEL_IDC_480X640;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_480X640;
 		break;
 	default:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 800;
@@ -462,7 +405,6 @@
 			LCD_PANEL_ID1_800X600;
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
-		return VIA_RES_800X600;
 	}
 }
 
@@ -573,284 +515,6 @@
 	}
 }
 
-static void load_lcd_k400_patch_tbl(int set_hres, int set_vres,
-	int panel_id)
-{
-	int vmode_index;
-	int reg_num = 0;
-	struct io_reg *lcd_patch_reg = NULL;
-
-	vmode_index = viafb_get_mode_index(set_hres, set_vres);
-	switch (panel_id) {
-		/* LCD 800x600 */
-	case LCD_PANEL_ID1_800X600:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_8X6;
-			lcd_patch_reg = K400_LCD_RES_6X4_8X6;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_8X6;
-			lcd_patch_reg = K400_LCD_RES_7X4_8X6;
-			break;
-		}
-		break;
-
-		/* LCD 1024x768 */
-	case LCD_PANEL_ID2_1024X768:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_10X7;
-			lcd_patch_reg = K400_LCD_RES_6X4_10X7;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_10X7;
-			lcd_patch_reg = K400_LCD_RES_7X4_10X7;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_10X7;
-			lcd_patch_reg = K400_LCD_RES_8X6_10X7;
-			break;
-		}
-		break;
-
-		/* LCD 1280x1024 */
-	case LCD_PANEL_ID4_1280X1024:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_12X10;
-			lcd_patch_reg = K400_LCD_RES_6X4_12X10;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_12X10;
-			lcd_patch_reg = K400_LCD_RES_7X4_12X10;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_12X10;
-			lcd_patch_reg = K400_LCD_RES_8X6_12X10;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_K400_LCD_RES_10X7_12X10;
-			lcd_patch_reg = K400_LCD_RES_10X7_12X10;
-			break;
-
-		}
-		break;
-
-		/* LCD 1400x1050 */
-	case LCD_PANEL_ID5_1400X1050:
-		switch (vmode_index) {
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_14X10;
-			lcd_patch_reg = K400_LCD_RES_6X4_14X10;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_14X10;
-			lcd_patch_reg = K400_LCD_RES_8X6_14X10;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_K400_LCD_RES_10X7_14X10;
-			lcd_patch_reg = K400_LCD_RES_10X7_14X10;
-			break;
-		case VIA_RES_1280X768:
-		case VIA_RES_1280X800:
-		case VIA_RES_1280X960:
-		case VIA_RES_1280X1024:
-			reg_num = NUM_TOTAL_K400_LCD_RES_12X10_14X10;
-			lcd_patch_reg = K400_LCD_RES_12X10_14X10;
-			break;
-		}
-		break;
-
-		/* LCD 1600x1200 */
-	case LCD_PANEL_ID6_1600X1200:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_16X12;
-			lcd_patch_reg = K400_LCD_RES_6X4_16X12;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_16X12;
-			lcd_patch_reg = K400_LCD_RES_7X4_16X12;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_16X12;
-			lcd_patch_reg = K400_LCD_RES_8X6_16X12;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_K400_LCD_RES_10X7_16X12;
-			lcd_patch_reg = K400_LCD_RES_10X7_16X12;
-			break;
-		case VIA_RES_1280X768:
-		case VIA_RES_1280X800:
-		case VIA_RES_1280X960:
-		case VIA_RES_1280X1024:
-			reg_num = NUM_TOTAL_K400_LCD_RES_12X10_16X12;
-			lcd_patch_reg = K400_LCD_RES_12X10_16X12;
-			break;
-		}
-		break;
-
-		/* LCD 1366x768 */
-	case LCD_PANEL_ID7_1366X768:
-		switch (vmode_index) {
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_K400_LCD_RES_6X4_1366X7;
-			lcd_patch_reg = K400_LCD_RES_6X4_1366X7;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_K400_LCD_RES_7X4_1366X7;
-			lcd_patch_reg = K400_LCD_RES_7X4_1366X7;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_K400_LCD_RES_8X6_1366X7;
-			lcd_patch_reg = K400_LCD_RES_8X6_1366X7;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_K400_LCD_RES_10X7_1366X7;
-			lcd_patch_reg = K400_LCD_RES_10X7_1366X7;
-			break;
-		case VIA_RES_1280X768:
-		case VIA_RES_1280X800:
-		case VIA_RES_1280X960:
-		case VIA_RES_1280X1024:
-			reg_num = NUM_TOTAL_K400_LCD_RES_12X10_1366X7;
-			lcd_patch_reg = K400_LCD_RES_12X10_1366X7;
-			break;
-		}
-		break;
-
-		/* LCD 1360x768 */
-	case LCD_PANEL_IDB_1360X768:
-		break;
-	}
-	if (reg_num != 0) {
-		/* H.W. Reset : ON */
-		viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
-
-		viafb_write_regx(lcd_patch_reg, reg_num);
-
-		/* H.W. Reset : OFF */
-		viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7);
-
-		/* Reset PLL */
-		viafb_write_reg_mask(SR40, VIASR, 0x02, BIT1);
-		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT1);
-
-		/* Fire! */
-		outb(inb(VIARMisc) | (BIT2 + BIT3), VIAWMisc);
-	}
-}
-
-static void load_lcd_p880_patch_tbl(int set_hres, int set_vres,
-	int panel_id)
-{
-	int vmode_index;
-	int reg_num = 0;
-	struct io_reg *lcd_patch_reg = NULL;
-
-	vmode_index = viafb_get_mode_index(set_hres, set_vres);
-
-	switch (panel_id) {
-	case LCD_PANEL_ID5_1400X1050:
-		switch (vmode_index) {
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_P880_LCD_RES_6X4_14X10;
-			lcd_patch_reg = P880_LCD_RES_6X4_14X10;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_P880_LCD_RES_8X6_14X10;
-			lcd_patch_reg = P880_LCD_RES_8X6_14X10;
-			break;
-		}
-		break;
-	case LCD_PANEL_ID6_1600X1200:
-		switch (vmode_index) {
-		case VIA_RES_640X400:
-		case VIA_RES_640X480:
-			reg_num = NUM_TOTAL_P880_LCD_RES_6X4_16X12;
-			lcd_patch_reg = P880_LCD_RES_6X4_16X12;
-			break;
-		case VIA_RES_720X480:
-		case VIA_RES_720X576:
-			reg_num = NUM_TOTAL_P880_LCD_RES_7X4_16X12;
-			lcd_patch_reg = P880_LCD_RES_7X4_16X12;
-			break;
-		case VIA_RES_800X600:
-			reg_num = NUM_TOTAL_P880_LCD_RES_8X6_16X12;
-			lcd_patch_reg = P880_LCD_RES_8X6_16X12;
-			break;
-		case VIA_RES_1024X768:
-			reg_num = NUM_TOTAL_P880_LCD_RES_10X7_16X12;
-			lcd_patch_reg = P880_LCD_RES_10X7_16X12;
-			break;
-		case VIA_RES_1280X768:
-		case VIA_RES_1280X960:
-		case VIA_RES_1280X1024:
-			reg_num = NUM_TOTAL_P880_LCD_RES_12X10_16X12;
-			lcd_patch_reg = P880_LCD_RES_12X10_16X12;
-			break;
-		}
-		break;
-
-	}
-	if (reg_num != 0) {
-		/* H.W. Reset : ON */
-		viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
-
-		viafb_write_regx(lcd_patch_reg, reg_num);
-
-		/* H.W. Reset : OFF */
-		viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7);
-
-		/* Reset PLL */
-		viafb_write_reg_mask(SR40, VIASR, 0x02, BIT1);
-		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT1);
-
-		/* Fire! */
-		outb(inb(VIARMisc) | (BIT2 + BIT3), VIAWMisc);
-	}
-}
-
-static void load_lcd_patch_regs(int set_hres, int set_vres,
-	int panel_id, int set_iga)
-{
-	int vmode_index;
-
-	vmode_index = viafb_get_mode_index(set_hres, set_vres);
-
-	viafb_unlock_crt();
-
-	/* Patch for simultaneous & Expansion */
-	if ((set_iga == IGA1_IGA2) &&
-		(viaparinfo->lvds_setting_info->display_method ==
-	    LCD_EXPANDSION)) {
-		switch (viaparinfo->chip_info->gfx_chip_name) {
-		case UNICHROME_CLE266:
-		case UNICHROME_K400:
-			load_lcd_k400_patch_tbl(set_hres, set_vres, panel_id);
-			break;
-		case UNICHROME_K800:
-			break;
-		case UNICHROME_PM800:
-		case UNICHROME_CN700:
-		case UNICHROME_CX700:
-			load_lcd_p880_patch_tbl(set_hres, set_vres, panel_id);
-		}
-	}
-
-	viafb_lock_crt();
-}
-
 static void via_pitch_alignment_patch_lcd(
 	struct lvds_setting_information *plvds_setting_info,
 				   struct lvds_chip_information
@@ -949,29 +613,25 @@
 		  struct lvds_setting_information *plvds_setting_info,
 		  struct lvds_chip_information *plvds_chip_info)
 {
-	int video_index = plvds_setting_info->lcd_panel_size;
 	int set_iga = plvds_setting_info->iga_path;
 	int mode_bpp = plvds_setting_info->bpp;
-	int set_hres, set_vres;
-	int panel_hres, panel_vres;
+	int set_hres = plvds_setting_info->h_active;
+	int set_vres = plvds_setting_info->v_active;
+	int panel_hres = plvds_setting_info->lcd_panel_hres;
+	int panel_vres = plvds_setting_info->lcd_panel_vres;
 	u32 pll_D_N;
-	int offset;
 	struct display_timing mode_crt_reg, panel_crt_reg;
 	struct crt_mode_table *panel_crt_table = NULL;
-	struct VideoModeTable *vmode_tbl = NULL;
+	struct VideoModeTable *vmode_tbl = viafb_get_mode(panel_hres,
+		panel_vres);
 
 	DEBUG_MSG(KERN_INFO "viafb_lcd_set_mode!!\n");
 	/* Get mode table */
 	mode_crt_reg = mode_crt_table->crtc;
 	/* Get panel table Pointer */
-	vmode_tbl = viafb_get_modetbl_pointer(video_index);
 	panel_crt_table = vmode_tbl->crtc;
 	panel_crt_reg = panel_crt_table->crtc;
 	DEBUG_MSG(KERN_INFO "bellow viafb_lcd_set_mode!!\n");
-	set_hres = plvds_setting_info->h_active;
-	set_vres = plvds_setting_info->v_active;
-	panel_hres = plvds_setting_info->lcd_panel_hres;
-	panel_vres = plvds_setting_info->lcd_panel_vres;
 	if (VT1636_LVDS == plvds_chip_info->lvds_chip_name)
 		viafb_init_lvds_vt1636(plvds_setting_info, plvds_chip_info);
 	plvds_setting_info->vclk = panel_crt_table->clk;
@@ -1001,54 +661,12 @@
 		}
 	}
 
-	if (set_iga == IGA1_IGA2) {
-		load_crtc_shadow_timing(mode_crt_reg, panel_crt_reg);
-		/* Fill shadow registers */
+	/* Fetch count for IGA2 only */
+	viafb_load_fetch_count_reg(set_hres, mode_bpp / 8, set_iga);
 
-		switch (plvds_setting_info->lcd_panel_id) {
-		case LCD_PANEL_ID0_640X480:
-			offset = 80;
-			break;
-		case LCD_PANEL_ID1_800X600:
-		case LCD_PANEL_IDA_800X480:
-			offset = 110;
-			break;
-		case LCD_PANEL_ID2_1024X768:
-			offset = 150;
-			break;
-		case LCD_PANEL_ID3_1280X768:
-		case LCD_PANEL_ID4_1280X1024:
-		case LCD_PANEL_ID5_1400X1050:
-		case LCD_PANEL_ID9_1280X800:
-			offset = 190;
-			break;
-		case LCD_PANEL_ID6_1600X1200:
-			offset = 250;
-			break;
-		case LCD_PANEL_ID7_1366X768:
-		case LCD_PANEL_IDB_1360X768:
-			offset = 212;
-			break;
-		default:
-			offset = 140;
-			break;
-		}
-
-		/* Offset for simultaneous */
-		viafb_set_secondary_pitch(offset << 3);
-		DEBUG_MSG(KERN_INFO "viafb_load_reg!!\n");
-		viafb_load_fetch_count_reg(set_hres, 4, IGA2);
-		/* Fetch count for simultaneous */
-	} else {		/* SAMM */
-		/* Fetch count for IGA2 only */
-		viafb_load_fetch_count_reg(set_hres, mode_bpp / 8, set_iga);
-
-		if ((viaparinfo->chip_info->gfx_chip_name != UNICHROME_CLE266)
-		    && (viaparinfo->chip_info->gfx_chip_name != UNICHROME_K400))
-			viafb_load_FIFO_reg(set_iga, set_hres, set_vres);
-
-		viafb_set_color_depth(mode_bpp / 8, set_iga);
-	}
+	if ((viaparinfo->chip_info->gfx_chip_name != UNICHROME_CLE266)
+		&& (viaparinfo->chip_info->gfx_chip_name != UNICHROME_K400))
+		viafb_load_FIFO_reg(set_iga, set_hres, set_vres);
 
 	fill_lcd_format();
 
@@ -1065,11 +683,6 @@
 	    || (UNICHROME_K8M890 == viaparinfo->chip_info->gfx_chip_name))
 		viafb_write_reg_mask(CR6A, VIACR, 0x01, BIT0);
 
-	load_lcd_patch_regs(set_hres, set_vres,
-			    plvds_setting_info->lcd_panel_id, set_iga);
-
-	DEBUG_MSG(KERN_INFO "load_lcd_patch_regs!!\n");
-
 	/* Patch for non 32bit alignment mode */
 	via_pitch_alignment_patch_lcd(plvds_setting_info, plvds_chip_info);
 }
@@ -1283,8 +896,7 @@
 		viafb_write_reg_mask(CR6A, VIACR, 0x48, 0x48);
 	}
 
-	if ((viaparinfo->lvds_setting_info->iga_path == IGA1)
-	    || (viaparinfo->lvds_setting_info->iga_path == IGA1_IGA2)) {
+	if (viaparinfo->lvds_setting_info->iga_path == IGA1) {
 		/* CRT path set to IGA2    */
 		viafb_write_reg_mask(SR16, VIASR, 0x40, 0x40);
 		/* IGA2 path disabled      */
@@ -1476,210 +1088,6 @@
 	return crt_reg;
 }
 
-static void load_crtc_shadow_timing(struct display_timing mode_timing,
-			     struct display_timing panel_timing)
-{
-	struct io_register *reg = NULL;
-	int i;
-	int viafb_load_reg_Num = 0;
-	int reg_value = 0;
-
-	if (viaparinfo->lvds_setting_info->display_method == LCD_EXPANDSION) {
-		/* Expansion */
-		for (i = 12; i < 20; i++) {
-			switch (i) {
-			case H_TOTAL_SHADOW_INDEX:
-				reg_value =
-				    IGA2_HOR_TOTAL_SHADOW_FORMULA
-				    (panel_timing.hor_total);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.hor_total_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.hor_total_shadow.reg;
-				break;
-			case H_BLANK_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_HOR_BLANK_END_SHADOW_FORMULA
-				    (panel_timing.hor_blank_start,
-				     panel_timing.hor_blank_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    hor_blank_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    hor_blank_end_shadow.reg;
-				break;
-			case V_TOTAL_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_TOTAL_SHADOW_FORMULA
-				    (panel_timing.ver_total);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_total_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.ver_total_shadow.reg;
-				break;
-			case V_ADDR_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_ADDR_SHADOW_FORMULA
-				    (panel_timing.ver_addr);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_addr_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.ver_addr_shadow.reg;
-				break;
-			case V_BLANK_SATRT_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_BLANK_START_SHADOW_FORMULA
-				    (panel_timing.ver_blank_start);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_start_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_start_shadow.reg;
-				break;
-			case V_BLANK_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_BLANK_END_SHADOW_FORMULA
-				    (panel_timing.ver_blank_start,
-				     panel_timing.ver_blank_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_end_shadow.reg;
-				break;
-			case V_SYNC_SATRT_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_SYNC_START_SHADOW_FORMULA
-				    (panel_timing.ver_sync_start);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_sync_start_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_sync_start_shadow.reg;
-				break;
-			case V_SYNC_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_SYNC_END_SHADOW_FORMULA
-				    (panel_timing.ver_sync_start,
-				     panel_timing.ver_sync_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_sync_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_sync_end_shadow.reg;
-				break;
-			}
-			viafb_load_reg(reg_value,
-				viafb_load_reg_Num, reg, VIACR);
-		}
-	} else {		/* Centering */
-		for (i = 12; i < 20; i++) {
-			switch (i) {
-			case H_TOTAL_SHADOW_INDEX:
-				reg_value =
-				    IGA2_HOR_TOTAL_SHADOW_FORMULA
-				    (panel_timing.hor_total);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.hor_total_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.hor_total_shadow.reg;
-				break;
-			case H_BLANK_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_HOR_BLANK_END_SHADOW_FORMULA
-				    (panel_timing.hor_blank_start,
-				     panel_timing.hor_blank_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    hor_blank_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    hor_blank_end_shadow.reg;
-				break;
-			case V_TOTAL_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_TOTAL_SHADOW_FORMULA
-				    (panel_timing.ver_total);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_total_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.ver_total_shadow.reg;
-				break;
-			case V_ADDR_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_ADDR_SHADOW_FORMULA
-				    (mode_timing.ver_addr);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_addr_shadow.
-				    reg_num;
-				reg = iga2_shadow_crtc_reg.ver_addr_shadow.reg;
-				break;
-			case V_BLANK_SATRT_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_BLANK_START_SHADOW_FORMULA
-				    (mode_timing.ver_blank_start);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_start_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_start_shadow.reg;
-				break;
-			case V_BLANK_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_BLANK_END_SHADOW_FORMULA
-				    (panel_timing.ver_blank_start,
-				     panel_timing.ver_blank_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_end_shadow.reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.
-				    ver_blank_end_shadow.reg;
-				break;
-			case V_SYNC_SATRT_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_SYNC_START_SHADOW_FORMULA(
-				    (panel_timing.ver_sync_start -
-				    panel_timing.ver_blank_start) +
-				    (panel_timing.ver_addr -
-				    mode_timing.ver_addr) / 2 +
-				    mode_timing.ver_addr);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_sync_start_shadow.
-				    reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.ver_sync_start_shadow.
-				    reg;
-				break;
-			case V_SYNC_END_SHADOW_INDEX:
-				reg_value =
-				    IGA2_VER_SYNC_END_SHADOW_FORMULA(
-				    (panel_timing.ver_sync_start -
-				    panel_timing.ver_blank_start) +
-				    (panel_timing.ver_addr -
-				    mode_timing.ver_addr) / 2 +
-				    mode_timing.ver_addr,
-				    panel_timing.ver_sync_end);
-				viafb_load_reg_Num =
-				    iga2_shadow_crtc_reg.ver_sync_end_shadow.
-				    reg_num;
-				reg =
-				    iga2_shadow_crtc_reg.ver_sync_end_shadow.
-				    reg;
-				break;
-			}
-			viafb_load_reg(reg_value,
-				viafb_load_reg_Num, reg, VIACR);
-		}
-	}
-}
-
 bool viafb_lcd_get_mobile_state(bool *mobile)
 {
 	unsigned char *romptr, *tableptr;
diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h
index 7cd03e2..d55aaa7 100644
--- a/drivers/video/via/share.h
+++ b/drivers/video/via/share.h
@@ -43,61 +43,6 @@
 /* Video Memory Size */
 #define VIDEO_MEMORY_SIZE_16M    0x1000000
 
-/* Definition Mode Index
-*/
-#define     VIA_RES_640X480                 	0
-#define     VIA_RES_800X600                 	1
-#define     VIA_RES_1024X768                	2
-#define     VIA_RES_1152X864                	3
-#define     VIA_RES_1280X1024               	4
-#define     VIA_RES_1600X1200               	5
-#define     VIA_RES_1440X1050               	6
-#define     VIA_RES_1280X768                	7
-#define     VIA_RES_1280X960                	8
-#define     VIA_RES_1920X1440               	9
-#define     VIA_RES_848X480                 	10
-#define     VIA_RES_1400X1050               	11
-#define     VIA_RES_720X480                 	12
-#define     VIA_RES_720X576                 	13
-#define     VIA_RES_1024X512                	14
-#define     VIA_RES_856X480                 	15
-#define     VIA_RES_1024X576                	16
-#define     VIA_RES_640X400                 	17
-#define     VIA_RES_1280X720                	18
-#define     VIA_RES_1920X1080               	19
-#define     VIA_RES_800X480                 	20
-#define     VIA_RES_1368X768                	21
-#define     VIA_RES_1024X600                	22
-#define     VIA_RES_1280X800                	23
-#define     VIA_RES_1680X1050               	24
-#define     VIA_RES_960X600			25
-#define     VIA_RES_1000X600               	26
-#define     VIA_RES_1088X612               	27
-#define     VIA_RES_1152X720               	28
-#define     VIA_RES_1200X720               	29
-#define     VIA_RES_1280X600               	30
-#define     VIA_RES_1360X768               	31
-#define     VIA_RES_1366X768               	32
-#define     VIA_RES_1440X900               	33
-#define     VIA_RES_1600X900               	34
-#define     VIA_RES_1600X1024              	35
-#define     VIA_RES_1792X1344              	36
-#define     VIA_RES_1856X1392              	37
-#define     VIA_RES_1920X1200              	38
-#define     VIA_RES_2048X1536              	39
-#define     VIA_RES_480X640                  	40
-
-/*Reduce Blanking*/
-#define     VIA_RES_1360X768_RB          	131
-#define     VIA_RES_1440X900_RB          	133
-#define     VIA_RES_1400X1050_RB        	111
-#define     VIA_RES_1600X900_RB          	134
-#define     VIA_RES_1680X1050_RB        	124
-#define     VIA_RES_1920X1080_RB        	119
-#define     VIA_RES_1920X1200_RB        	138
-
-#define     VIA_RES_INVALID                 	255
-
 /* standard VGA IO port
 */
 #define VIARMisc    0x3CC
@@ -118,7 +63,6 @@
 /* Display path */
 #define IGA1        1
 #define IGA2        2
-#define IGA1_IGA2   3
 
 /* Define Color Depth  */
 #define MODE_8BPP       1
diff --git a/drivers/video/via/via_utility.c b/drivers/video/via/via_utility.c
index d53c3d54..aefdeee 100644
--- a/drivers/video/via/via_utility.c
+++ b/drivers/video/via/via_utility.c
@@ -239,15 +239,3 @@
 	else
 		*support_state = CRT_Device | DVI_Device | LCD_Device;
 }
-
-int viafb_input_parameter_converter(int parameter_value)
-{
-	int result;
-
-	if (parameter_value >= 1 && parameter_value <= 9)
-		result = 1 << (parameter_value - 1);
-	else
-		result = 1;
-
-	return result;
-}
diff --git a/drivers/video/via/via_utility.h b/drivers/video/via/via_utility.h
index 2fd4552..1670ba8 100644
--- a/drivers/video/via/via_utility.h
+++ b/drivers/video/via/via_utility.h
@@ -30,6 +30,5 @@
 void viafb_set_gamma_table(int bpp, unsigned int *gamma_table);
 void viafb_get_gamma_table(unsigned int *gamma_table);
 void viafb_get_gamma_support_state(int bpp, unsigned int *support_state);
-int viafb_input_parameter_converter(int parameter_value);
 
 #endif /* __VIAUTILITY_H__ */
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 3028e7d..ce7783b 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -26,18 +26,22 @@
 
 #include "global.h"
 
-static struct fb_var_screeninfo default_var;
 static char *viafb_name = "Via";
 static u32 pseudo_pal[17];
 
 /* video mode */
-static char *viafb_mode = "640x480";
-static char *viafb_mode1 = "640x480";
+static char *viafb_mode;
+static char *viafb_mode1;
+static int viafb_bpp = 32;
+static int viafb_bpp1 = 32;
+
+static unsigned int viafb_second_offset;
+static int viafb_second_size;
 
 static int viafb_accel = 1;
 
 /* Added for specifying active devices.*/
-char *viafb_active_dev = "";
+char *viafb_active_dev;
 
 /*Added for specify lcd output port*/
 char *viafb_lcd_port = "";
@@ -50,18 +54,78 @@
 	*sec_var);
 static void retrieve_device_setting(struct viafb_ioctl_setting
 	*setting_info);
+static int viafb_pan_display(struct fb_var_screeninfo *var,
+	struct fb_info *info);
 
 static struct fb_ops viafb_ops;
 
 
+static void viafb_fill_var_color_info(struct fb_var_screeninfo *var, u8 depth)
+{
+	var->grayscale = 0;
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.msb_right = 0;
+	var->transp.offset = 0;
+	var->transp.length = 0;
+	var->transp.msb_right = 0;
+	var->nonstd = 0;
+	switch (depth) {
+	case 8:
+		var->bits_per_pixel = 8;
+		var->red.offset = 0;
+		var->green.offset = 0;
+		var->blue.offset = 0;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		break;
+	case 15:
+		var->bits_per_pixel = 16;
+		var->red.offset = 10;
+		var->green.offset = 5;
+		var->blue.offset = 0;
+		var->red.length = 5;
+		var->green.length = 5;
+		var->blue.length = 5;
+		break;
+	case 16:
+		var->bits_per_pixel = 16;
+		var->red.offset = 11;
+		var->green.offset = 5;
+		var->blue.offset = 0;
+		var->red.length = 5;
+		var->green.length = 6;
+		var->blue.length = 5;
+		break;
+	case 24:
+		var->bits_per_pixel = 32;
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		break;
+	case 30:
+		var->bits_per_pixel = 32;
+		var->red.offset = 20;
+		var->green.offset = 10;
+		var->blue.offset = 0;
+		var->red.length = 10;
+		var->green.length = 10;
+		var->blue.length = 10;
+		break;
+	}
+}
+
 static void viafb_update_fix(struct fb_info *info)
 {
 	u32 bpp = info->var.bits_per_pixel;
 
 	info->fix.visual =
 		bpp == 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
-	info->fix.line_length =
-		((info->var.xres_virtual + 7) & ~7) * bpp / 8;
+	info->fix.line_length = (info->var.xres_virtual * bpp / 8 + 7) & ~7;
 }
 
 static void viafb_setup_fixinfo(struct fb_fix_screeninfo *fix,
@@ -75,6 +139,7 @@
 
 	fix->type = FB_TYPE_PACKED_PIXELS;
 	fix->type_aux = 0;
+	fix->visual = FB_VISUAL_TRUECOLOR;
 
 	fix->xpanstep = fix->ywrapstep = 0;
 	fix->ypanstep = 1;
@@ -97,9 +162,10 @@
 static int viafb_check_var(struct fb_var_screeninfo *var,
 	struct fb_info *info)
 {
-	int vmode_index, htotal, vtotal;
+	int htotal, vtotal, depth;
+	struct VideoModeTable *vmode_entry;
 	struct viafb_par *ppar = info->par;
-	u32 long_refresh;
+	u32 long_refresh, line;
 
 	DEBUG_MSG(KERN_INFO "viafb_check_var!\n");
 	/* Sanity check */
@@ -107,26 +173,36 @@
 	if (var->vmode & FB_VMODE_INTERLACED || var->vmode & FB_VMODE_DOUBLE)
 		return -EINVAL;
 
-	vmode_index = viafb_get_mode_index(var->xres, var->yres);
-	if (vmode_index == VIA_RES_INVALID) {
+	vmode_entry = viafb_get_mode(var->xres, var->yres);
+	if (!vmode_entry) {
 		DEBUG_MSG(KERN_INFO
 			  "viafb: Mode %dx%dx%d not supported!!\n",
 			  var->xres, var->yres, var->bits_per_pixel);
 		return -EINVAL;
 	}
 
-	if (24 == var->bits_per_pixel)
-		var->bits_per_pixel = 32;
+	depth = fb_get_color_depth(var, &info->fix);
+	if (!depth)
+		depth = var->bits_per_pixel;
 
-	if (var->bits_per_pixel != 8 && var->bits_per_pixel != 16 &&
-		var->bits_per_pixel != 32)
+	if (depth < 0 || depth > 32)
 		return -EINVAL;
+	else if (!depth)
+		depth = 24;
+	else if (depth == 15 && viafb_dual_fb && ppar->iga_path == IGA1)
+		depth = 15;
+	else if (depth == 30)
+		depth = 30;
+	else if (depth <= 8)
+		depth = 8;
+	else if (depth <= 16)
+		depth = 16;
+	else
+		depth = 24;
 
-	if ((var->xres_virtual * (var->bits_per_pixel >> 3)) & 0x1F)
-		/*32 pixel alignment */
-		var->xres_virtual = (var->xres_virtual + 31) & ~31;
-	if (var->xres_virtual * var->yres_virtual * var->bits_per_pixel / 8 >
-		ppar->memsize)
+	viafb_fill_var_color_info(var, depth);
+	line = (var->xres_virtual * var->bits_per_pixel / 8 + 7) & ~7;
+	if (line * var->yres_virtual > ppar->memsize)
 		return -EINVAL;
 
 	/* Based on var passed in to calculate the refresh,
@@ -142,7 +218,7 @@
 	viafb_refresh = viafb_get_refresh(var->xres, var->yres, long_refresh);
 
 	/* Adjust var according to our driver's own table */
-	viafb_fill_var_timing_info(var, viafb_refresh, vmode_index);
+	viafb_fill_var_timing_info(var, viafb_refresh, vmode_entry);
 	if (info->var.accel_flags & FB_ACCELF_TEXT &&
 		!ppar->shared->engine_mmio)
 		info->var.accel_flags = 0;
@@ -153,39 +229,45 @@
 static int viafb_set_par(struct fb_info *info)
 {
 	struct viafb_par *viapar = info->par;
-	int vmode_index;
-	int vmode_index1 = 0;
+	struct VideoModeTable *vmode_entry, *vmode_entry1 = NULL;
 	DEBUG_MSG(KERN_INFO "viafb_set_par!\n");
 
 	viapar->depth = fb_get_color_depth(&info->var, &info->fix);
-	viafb_update_device_setting(info->var.xres, info->var.yres,
-			      info->var.bits_per_pixel, viafb_refresh, 0);
+	viafb_update_device_setting(viafbinfo->var.xres, viafbinfo->var.yres,
+		viafbinfo->var.bits_per_pixel, viafb_refresh, 0);
 
-	vmode_index = viafb_get_mode_index(info->var.xres, info->var.yres);
-
-	if (viafb_SAMM_ON == 1) {
+	vmode_entry = viafb_get_mode(viafbinfo->var.xres, viafbinfo->var.yres);
+	if (viafb_dual_fb) {
+		vmode_entry1 = viafb_get_mode(viafbinfo1->var.xres,
+			viafbinfo1->var.yres);
+		viafb_update_device_setting(viafbinfo1->var.xres,
+			viafbinfo1->var.yres, viafbinfo1->var.bits_per_pixel,
+			viafb_refresh1, 1);
+	} else if (viafb_SAMM_ON == 1) {
 		DEBUG_MSG(KERN_INFO
 		"viafb_second_xres = %d, viafb_second_yres = %d, bpp = %d\n",
 			  viafb_second_xres, viafb_second_yres, viafb_bpp1);
-		vmode_index1 = viafb_get_mode_index(viafb_second_xres,
+		vmode_entry1 = viafb_get_mode(viafb_second_xres,
 			viafb_second_yres);
-		DEBUG_MSG(KERN_INFO "->viafb_SAMM_ON: index=%d\n",
-			vmode_index1);
 
 		viafb_update_device_setting(viafb_second_xres,
 			viafb_second_yres, viafb_bpp1, viafb_refresh1, 1);
 	}
 
-	if (vmode_index != VIA_RES_INVALID) {
+	if (vmode_entry) {
 		viafb_update_fix(info);
-		viafb_bpp = info->var.bits_per_pixel;
+		if (viafb_dual_fb && viapar->iga_path == IGA2)
+			viafb_bpp1 = info->var.bits_per_pixel;
+		else
+			viafb_bpp = info->var.bits_per_pixel;
+
 		if (info->var.accel_flags & FB_ACCELF_TEXT)
 			info->flags &= ~FBINFO_HWACCEL_DISABLED;
 		else
 			info->flags |= FBINFO_HWACCEL_DISABLED;
-		viafb_setmode(vmode_index, info->var.xres, info->var.yres,
-			info->var.bits_per_pixel, vmode_index1,
-			viafb_second_xres, viafb_second_yres, viafb_bpp1);
+		viafb_setmode(vmode_entry, info->var.bits_per_pixel,
+			vmode_entry1, viafb_bpp1);
+		viafb_pan_display(&info->var, info);
 	}
 
 	return 0;
@@ -195,234 +277,52 @@
 static int viafb_setcolreg(unsigned regno, unsigned red, unsigned green,
 unsigned blue, unsigned transp, struct fb_info *info)
 {
-	u8 sr1a, sr1b, cr67, cr6a, rev = 0, shift = 10;
-	unsigned cmap_entries = (info->var.bits_per_pixel == 8) ? 256 : 16;
-	DEBUG_MSG(KERN_INFO "viafb_setcolreg!\n");
-	if (regno >= cmap_entries)
-		return 1;
-	if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name) {
-		/*
-		 * Read PCI bus 0,dev 0,function 0,index 0xF6 to get chip rev.
-		 */
-		outl(0x80000000 | (0xf6 & ~3), (unsigned long)0xCF8);
-		rev = (inl((unsigned long)0xCFC) >> ((0xf6 & 3) * 8)) & 0xff;
-	}
-	switch (info->var.bits_per_pixel) {
-	case 8:
-		outb(0x1A, 0x3C4);
-		sr1a = inb(0x3C5);
-		outb(0x1B, 0x3C4);
-		sr1b = inb(0x3C5);
-		outb(0x67, 0x3D4);
-		cr67 = inb(0x3D5);
-		outb(0x6A, 0x3D4);
-		cr6a = inb(0x3D5);
+	struct viafb_par *viapar = info->par;
+	u32 r, g, b;
 
-		/* Map the 3C6/7/8/9 to the IGA2 */
-		outb(0x1A, 0x3C4);
-		outb(sr1a | 0x01, 0x3C5);
-		/* Second Display Engine colck always on */
-		outb(0x1B, 0x3C4);
-		outb(sr1b | 0x80, 0x3C5);
-		/* Second Display Color Depth 8 */
-		outb(0x67, 0x3D4);
-		outb(cr67 & 0x3F, 0x3D5);
-		outb(0x6A, 0x3D4);
-		/* Second Display Channel Reset CR6A[6]) */
-		outb(cr6a & 0xBF, 0x3D5);
-		/* Second Display Channel Enable CR6A[7] */
-		outb(cr6a | 0x80, 0x3D5);
-		/* Second Display Channel stop reset) */
-		outb(cr6a | 0x40, 0x3D5);
+	if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR) {
+		if (regno > 255)
+			return -EINVAL;
 
-		/* Bit mask of palette */
-		outb(0xFF, 0x3c6);
-		/* Write one register of IGA2 */
-		outb(regno, 0x3C8);
-		if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name &&
-			rev >= 15) {
-			shift = 8;
-			viafb_write_reg_mask(CR6A, VIACR, BIT5, BIT5);
-			viafb_write_reg_mask(SR15, VIASR, BIT7, BIT7);
-		} else {
-			shift = 10;
-			viafb_write_reg_mask(CR6A, VIACR, 0, BIT5);
-			viafb_write_reg_mask(SR15, VIASR, 0, BIT7);
-		}
-		outb(red >> shift, 0x3C9);
-		outb(green >> shift, 0x3C9);
-		outb(blue >> shift, 0x3C9);
+		if (!viafb_dual_fb || viapar->iga_path == IGA1)
+			viafb_set_primary_color_register(regno, red >> 8,
+				green >> 8, blue >> 8);
 
-		/* Map the 3C6/7/8/9 to the IGA1 */
-		outb(0x1A, 0x3C4);
-		outb(sr1a & 0xFE, 0x3C5);
-		/* Bit mask of palette */
-		outb(0xFF, 0x3c6);
-		/* Write one register of IGA1 */
-		outb(regno, 0x3C8);
-		outb(red >> shift, 0x3C9);
-		outb(green >> shift, 0x3C9);
-		outb(blue >> shift, 0x3C9);
+		if (!viafb_dual_fb || viapar->iga_path == IGA2)
+			viafb_set_secondary_color_register(regno, red >> 8,
+				green >> 8, blue >> 8);
+	} else {
+		if (regno > 15)
+			return -EINVAL;
 
-		outb(0x1A, 0x3C4);
-		outb(sr1a, 0x3C5);
-		outb(0x1B, 0x3C4);
-		outb(sr1b, 0x3C5);
-		outb(0x67, 0x3D4);
-		outb(cr67, 0x3D5);
-		outb(0x6A, 0x3D4);
-		outb(cr6a, 0x3D5);
-		break;
-	case 16:
-		((u32 *) info->pseudo_palette)[regno] = (red & 0xF800) |
-		    ((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
-		break;
-	case 32:
-		((u32 *) info->pseudo_palette)[regno] =
-		    ((transp & 0xFF00) << 16) |
-		    ((red & 0xFF00) << 8) |
-		    ((green & 0xFF00)) | ((blue & 0xFF00) >> 8);
-		break;
+		r = (red >> (16 - info->var.red.length))
+			<< info->var.red.offset;
+		b = (blue >> (16 - info->var.blue.length))
+			<< info->var.blue.offset;
+		g = (green >> (16 - info->var.green.length))
+			<< info->var.green.offset;
+		((u32 *) info->pseudo_palette)[regno] = r | g | b;
 	}
 
 	return 0;
-
-}
-
-/*CALLED BY: fb_set_cmap */
-/*           fb_set_var, pass 256 colors */
-/*CALLED BY: fb_set_cmap */
-/*           fbcon_set_palette, pass 16 colors */
-static int viafb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
-{
-	u32 len = cmap->len;
-	u32 i;
-	u16 *pred = cmap->red;
-	u16 *pgreen = cmap->green;
-	u16 *pblue = cmap->blue;
-	u16 *ptransp = cmap->transp;
-	u8 sr1a, sr1b, cr67, cr6a, rev = 0, shift = 10;
-	if (len > 256)
-		return 1;
-	if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name) {
-		/*
-		 * Read PCI bus 0, dev 0, function 0, index 0xF6 to get chip
-		 * rev.
-		 */
-		outl(0x80000000 | (0xf6 & ~3), (unsigned long)0xCF8);
-		rev = (inl((unsigned long)0xCFC) >> ((0xf6 & 3) * 8)) & 0xff;
-	}
-	switch (info->var.bits_per_pixel) {
-	case 8:
-		outb(0x1A, 0x3C4);
-		sr1a = inb(0x3C5);
-		outb(0x1B, 0x3C4);
-		sr1b = inb(0x3C5);
-		outb(0x67, 0x3D4);
-		cr67 = inb(0x3D5);
-		outb(0x6A, 0x3D4);
-		cr6a = inb(0x3D5);
-		/* Map the 3C6/7/8/9 to the IGA2 */
-		outb(0x1A, 0x3C4);
-		outb(sr1a | 0x01, 0x3C5);
-		outb(0x1B, 0x3C4);
-		/* Second Display Engine colck always on */
-		outb(sr1b | 0x80, 0x3C5);
-		outb(0x67, 0x3D4);
-		/* Second Display Color Depth 8 */
-		outb(cr67 & 0x3F, 0x3D5);
-		outb(0x6A, 0x3D4);
-		/* Second Display Channel Reset CR6A[6]) */
-		outb(cr6a & 0xBF, 0x3D5);
-		/* Second Display Channel Enable CR6A[7] */
-		outb(cr6a | 0x80, 0x3D5);
-		/* Second Display Channel stop reset) */
-		outb(cr6a | 0xC0, 0x3D5);
-
-		/* Bit mask of palette */
-		outb(0xFF, 0x3c6);
-		outb(0x00, 0x3C8);
-		if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name &&
-			rev >= 15) {
-			shift = 8;
-			viafb_write_reg_mask(CR6A, VIACR, BIT5, BIT5);
-			viafb_write_reg_mask(SR15, VIASR, BIT7, BIT7);
-		} else {
-			shift = 10;
-			viafb_write_reg_mask(CR6A, VIACR, 0, BIT5);
-			viafb_write_reg_mask(SR15, VIASR, 0, BIT7);
-		}
-		for (i = 0; i < len; i++) {
-			outb((*(pred + i)) >> shift, 0x3C9);
-			outb((*(pgreen + i)) >> shift, 0x3C9);
-			outb((*(pblue + i)) >> shift, 0x3C9);
-		}
-
-		outb(0x1A, 0x3C4);
-		/* Map the 3C6/7/8/9 to the IGA1 */
-		outb(sr1a & 0xFE, 0x3C5);
-		/* Bit mask of palette */
-		outb(0xFF, 0x3c6);
-		outb(0x00, 0x3C8);
-		for (i = 0; i < len; i++) {
-			outb((*(pred + i)) >> shift, 0x3C9);
-			outb((*(pgreen + i)) >> shift, 0x3C9);
-			outb((*(pblue + i)) >> shift, 0x3C9);
-		}
-
-		outb(0x1A, 0x3C4);
-		outb(sr1a, 0x3C5);
-		outb(0x1B, 0x3C4);
-		outb(sr1b, 0x3C5);
-		outb(0x67, 0x3D4);
-		outb(cr67, 0x3D5);
-		outb(0x6A, 0x3D4);
-		outb(cr6a, 0x3D5);
-		break;
-	case 16:
-		if (len > 17)
-			return 0;	/* Because static u32 pseudo_pal[17]; */
-		for (i = 0; i < len; i++)
-			((u32 *) info->pseudo_palette)[i] =
-			    (*(pred + i) & 0xF800) |
-			    ((*(pgreen + i) & 0xFC00) >> 5) |
-			    ((*(pblue + i) & 0xF800) >> 11);
-		break;
-	case 32:
-		if (len > 17)
-			return 0;
-		if (ptransp) {
-			for (i = 0; i < len; i++)
-				((u32 *) info->pseudo_palette)[i] =
-				    ((*(ptransp + i) & 0xFF00) << 16) |
-				    ((*(pred + i) & 0xFF00) << 8) |
-				    ((*(pgreen + i) & 0xFF00)) |
-				    ((*(pblue + i) & 0xFF00) >> 8);
-		} else {
-			for (i = 0; i < len; i++)
-				((u32 *) info->pseudo_palette)[i] =
-				    0x00000000 |
-				    ((*(pred + i) & 0xFF00) << 8) |
-				    ((*(pgreen + i) & 0xFF00)) |
-				    ((*(pblue + i) & 0xFF00) >> 8);
-		}
-		break;
-	}
-	return 0;
 }
 
 static int viafb_pan_display(struct fb_var_screeninfo *var,
 	struct fb_info *info)
 {
-	unsigned int offset;
+	struct viafb_par *viapar = info->par;
+	u32 vram_addr = (var->yoffset * var->xres_virtual + var->xoffset)
+		* (var->bits_per_pixel / 8) + viapar->vram_addr;
 
-	DEBUG_MSG(KERN_INFO "viafb_pan_display!\n");
+	DEBUG_MSG(KERN_DEBUG "viafb_pan_display, address = %d\n", vram_addr);
+	if (!viafb_dual_fb) {
+		viafb_set_primary_address(vram_addr);
+		viafb_set_secondary_address(vram_addr);
+	} else if (viapar->iga_path == IGA1)
+		viafb_set_primary_address(vram_addr);
+	else
+		viafb_set_secondary_address(vram_addr);
 
-	offset = (var->xoffset + (var->yoffset * var->xres_virtual)) *
-	    var->bits_per_pixel / 16;
-
-	DEBUG_MSG(KERN_INFO "\nviafb_pan_display,offset =%d ", offset);
-	viafb_set_primary_address(offset);
 	return 0;
 }
 
@@ -476,6 +376,7 @@
 	u32 gpu32;
 
 	DEBUG_MSG(KERN_INFO "viafb_ioctl: 0x%X !!\n", cmd);
+	printk(KERN_WARNING "viafb_ioctl: Please avoid this interface as it is unstable and might change or vanish at any time!\n");
 	memset(&u, 0, sizeof(u));
 
 	switch (cmd) {
@@ -1015,23 +916,6 @@
 	return 0;
 }
 
-int viafb_get_mode_index(int hres, int vres)
-{
-	u32 i;
-	DEBUG_MSG(KERN_INFO "viafb_get_mode_index!\n");
-
-	for (i = 0; i < NUM_TOTAL_MODETABLE; i++)
-		if (CLE266Modes[i].mode_array &&
-			CLE266Modes[i].crtc[0].crtc.hor_addr == hres &&
-			CLE266Modes[i].crtc[0].crtc.ver_addr == vres)
-			break;
-
-	if (i == NUM_TOTAL_MODETABLE)
-		return VIA_RES_INVALID;
-
-	return CLE266Modes[i].ModeIndex;
-}
-
 static void check_available_device_to_enable(int device_id)
 {
 	int device_num = 0;
@@ -1330,7 +1214,7 @@
 	setting_info->lcd_attributes.lcd_mode = viafb_lcd_mode;
 }
 
-static void parse_active_dev(void)
+static int parse_active_dev(void)
 {
 	viafb_CRT_ON = STATE_OFF;
 	viafb_DVI_ON = STATE_OFF;
@@ -1341,60 +1225,63 @@
 	   IGA path to devices in SAMM case. */
 	/*    Note: The previous of active_dev is primary device,
 	   and the following is secondary device. */
-	if (!strncmp(viafb_active_dev, "CRT+DVI", 7)) {
+	if (!viafb_active_dev) {
+		viafb_CRT_ON = STATE_ON;
+		viafb_SAMM_ON = STATE_OFF;
+	} else if (!strcmp(viafb_active_dev, "CRT+DVI")) {
 		/* CRT+DVI */
 		viafb_CRT_ON = STATE_ON;
 		viafb_DVI_ON = STATE_ON;
 		viafb_primary_dev = CRT_Device;
-	} else if (!strncmp(viafb_active_dev, "DVI+CRT", 7)) {
+	} else if (!strcmp(viafb_active_dev, "DVI+CRT")) {
 		/* DVI+CRT */
 		viafb_CRT_ON = STATE_ON;
 		viafb_DVI_ON = STATE_ON;
 		viafb_primary_dev = DVI_Device;
-	} else if (!strncmp(viafb_active_dev, "CRT+LCD", 7)) {
+	} else if (!strcmp(viafb_active_dev, "CRT+LCD")) {
 		/* CRT+LCD */
 		viafb_CRT_ON = STATE_ON;
 		viafb_LCD_ON = STATE_ON;
 		viafb_primary_dev = CRT_Device;
-	} else if (!strncmp(viafb_active_dev, "LCD+CRT", 7)) {
+	} else if (!strcmp(viafb_active_dev, "LCD+CRT")) {
 		/* LCD+CRT */
 		viafb_CRT_ON = STATE_ON;
 		viafb_LCD_ON = STATE_ON;
 		viafb_primary_dev = LCD_Device;
-	} else if (!strncmp(viafb_active_dev, "DVI+LCD", 7)) {
+	} else if (!strcmp(viafb_active_dev, "DVI+LCD")) {
 		/* DVI+LCD */
 		viafb_DVI_ON = STATE_ON;
 		viafb_LCD_ON = STATE_ON;
 		viafb_primary_dev = DVI_Device;
-	} else if (!strncmp(viafb_active_dev, "LCD+DVI", 7)) {
+	} else if (!strcmp(viafb_active_dev, "LCD+DVI")) {
 		/* LCD+DVI */
 		viafb_DVI_ON = STATE_ON;
 		viafb_LCD_ON = STATE_ON;
 		viafb_primary_dev = LCD_Device;
-	} else if (!strncmp(viafb_active_dev, "LCD+LCD2", 8)) {
+	} else if (!strcmp(viafb_active_dev, "LCD+LCD2")) {
 		viafb_LCD_ON = STATE_ON;
 		viafb_LCD2_ON = STATE_ON;
 		viafb_primary_dev = LCD_Device;
-	} else if (!strncmp(viafb_active_dev, "LCD2+LCD", 8)) {
+	} else if (!strcmp(viafb_active_dev, "LCD2+LCD")) {
 		viafb_LCD_ON = STATE_ON;
 		viafb_LCD2_ON = STATE_ON;
 		viafb_primary_dev = LCD2_Device;
-	} else if (!strncmp(viafb_active_dev, "CRT", 3)) {
+	} else if (!strcmp(viafb_active_dev, "CRT")) {
 		/* CRT only */
 		viafb_CRT_ON = STATE_ON;
 		viafb_SAMM_ON = STATE_OFF;
-	} else if (!strncmp(viafb_active_dev, "DVI", 3)) {
+	} else if (!strcmp(viafb_active_dev, "DVI")) {
 		/* DVI only */
 		viafb_DVI_ON = STATE_ON;
 		viafb_SAMM_ON = STATE_OFF;
-	} else if (!strncmp(viafb_active_dev, "LCD", 3)) {
+	} else if (!strcmp(viafb_active_dev, "LCD")) {
 		/* LCD only */
 		viafb_LCD_ON = STATE_ON;
 		viafb_SAMM_ON = STATE_OFF;
-	} else {
-		viafb_CRT_ON = STATE_ON;
-		viafb_SAMM_ON = STATE_OFF;
-	}
+	} else
+		return -EINVAL;
+
+	return 0;
 }
 
 static int parse_port(char *opt_str, int *output_interface)
@@ -1823,35 +1710,37 @@
 	remove_proc_entry("viafb", NULL);
 }
 
-static void parse_mode(const char *str, u32 *xres, u32 *yres)
+static int parse_mode(const char *str, u32 *xres, u32 *yres)
 {
 	char *ptr;
 
+	if (!str) {
+		*xres = 640;
+		*yres = 480;
+		return 0;
+	}
+
 	*xres = simple_strtoul(str, &ptr, 10);
 	if (ptr[0] != 'x')
-		goto out_default;
+		return -EINVAL;
 
 	*yres = simple_strtoul(&ptr[1], &ptr, 10);
 	if (ptr[0])
-		goto out_default;
+		return -EINVAL;
 
-	return;
-
-out_default:
-	printk(KERN_WARNING "viafb received invalid mode string: %s\n", str);
-	*xres = 640;
-	*yres = 480;
+	return 0;
 }
 
 static int __devinit via_pci_probe(struct pci_dev *pdev,
 				   const struct pci_device_id *ent)
 {
 	u32 default_xres, default_yres;
-	int vmode_index;
+	struct VideoModeTable *vmode_entry;
+	struct fb_var_screeninfo default_var;
 	u32 viafb_par_length;
 
 	DEBUG_MSG(KERN_INFO "VIAFB PCI Probe!!\n");
-
+	memset(&default_var, 0, sizeof(default_var));
 	viafb_par_length = ALIGN(sizeof(struct viafb_par), BITS_PER_LONG/8);
 
 	/* Allocate fb_info and ***_par here, also including some other needed
@@ -1877,7 +1766,6 @@
 
 	if (viafb_dual_fb)
 		viafb_SAMM_ON = 1;
-	parse_active_dev();
 	parse_lcd_port();
 	parse_dvi_port();
 
@@ -1926,9 +1814,7 @@
 	}
 
 	parse_mode(viafb_mode, &default_xres, &default_yres);
-	vmode_index = viafb_get_mode_index(default_xres, default_yres);
-	DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index);
-
+	vmode_entry = viafb_get_mode(default_xres, default_yres);
 	if (viafb_SAMM_ON == 1) {
 		parse_mode(viafb_mode1, &viafb_second_xres,
 			&viafb_second_yres);
@@ -1947,19 +1833,6 @@
 			viafb_second_virtual_yres = viafb_second_yres;
 	}
 
-	switch (viafb_bpp) {
-	case 0 ... 8:
-		viafb_bpp = 8;
-		break;
-	case 9 ... 16:
-		viafb_bpp = 16;
-		break;
-	case 17 ... 32:
-		viafb_bpp = 32;
-		break;
-	default:
-		viafb_bpp = 8;
-	}
 	default_var.xres = default_xres;
 	default_var.yres = default_yres;
 	switch (default_xres) {
@@ -1972,8 +1845,6 @@
 	}
 	default_var.yres_virtual = default_yres;
 	default_var.bits_per_pixel = viafb_bpp;
-	if (default_var.bits_per_pixel == 15)
-		default_var.bits_per_pixel = 16;
 	default_var.pixclock =
 	    viafb_get_pixclock(default_xres, default_yres, viafb_refresh);
 	default_var.left_margin = (default_xres >> 3) & 0xf8;
@@ -1982,6 +1853,8 @@
 	default_var.lower_margin = 4;
 	default_var.hsync_len = default_var.left_margin;
 	default_var.vsync_len = 4;
+	viafb_setup_fixinfo(&viafbinfo->fix, viaparinfo);
+	viafbinfo->var = default_var;
 
 	if (viafb_dual_fb) {
 		viafbinfo1 = framebuffer_alloc(viafb_par_length, &pdev->dev);
@@ -2016,8 +1889,6 @@
 		default_var.yres = viafb_second_yres;
 		default_var.xres_virtual = viafb_second_virtual_xres;
 		default_var.yres_virtual = viafb_second_virtual_yres;
-		if (viafb_bpp1 != viafb_bpp)
-			viafb_bpp1 = viafb_bpp;
 		default_var.bits_per_pixel = viafb_bpp1;
 		default_var.pixclock =
 		    viafb_get_pixclock(viafb_second_xres, viafb_second_yres,
@@ -2037,9 +1908,7 @@
 			&viafbinfo1->fix);
 	}
 
-	viafb_setup_fixinfo(&viafbinfo->fix, viaparinfo);
-	viafb_check_var(&default_var, viafbinfo);
-	viafbinfo->var = default_var;
+	viafb_check_var(&viafbinfo->var, viafbinfo);
 	viafb_update_fix(viafbinfo);
 	viaparinfo->depth = fb_get_color_depth(&viafbinfo->var,
 		&viafbinfo->fix);
@@ -2197,12 +2066,20 @@
 
 static int __init viafb_init(void)
 {
+	u32 dummy;
 #ifndef MODULE
 	char *option = NULL;
 	if (fb_get_options("viafb", &option))
 		return -ENODEV;
 	viafb_setup(option);
 #endif
+	if (parse_mode(viafb_mode, &dummy, &dummy)
+		|| parse_mode(viafb_mode1, &dummy, &dummy)
+		|| viafb_bpp < 0 || viafb_bpp > 32
+		|| viafb_bpp1 < 0 || viafb_bpp1 > 32
+		|| parse_active_dev())
+		return -EINVAL;
+
 	printk(KERN_INFO
        "VIA Graphics Intergration Chipset framebuffer %d.%d initializing\n",
 	       VERSION_MAJOR, VERSION_MINOR);
@@ -2230,15 +2107,12 @@
 	.fb_cursor = viafb_cursor,
 	.fb_ioctl = viafb_ioctl,
 	.fb_sync = viafb_sync,
-	.fb_setcmap = viafb_setcmap,
 };
 
 module_init(viafb_init);
 module_exit(viafb_exit);
 
 #ifdef MODULE
-module_param(viafb_memsize, int, S_IRUSR);
-
 module_param(viafb_mode, charp, S_IRUSR);
 MODULE_PARM_DESC(viafb_mode, "Set resolution (default=640x480)");
 
diff --git a/drivers/video/via/viafbdev.h b/drivers/video/via/viafbdev.h
index 0c94d24..61b5953 100644
--- a/drivers/video/via/viafbdev.h
+++ b/drivers/video/via/viafbdev.h
@@ -83,22 +83,16 @@
 
 extern unsigned int viafb_second_virtual_yres;
 extern unsigned int viafb_second_virtual_xres;
-extern unsigned int viafb_second_offset;
-extern int viafb_second_size;
 extern int viafb_SAMM_ON;
 extern int viafb_dual_fb;
 extern int viafb_LCD2_ON;
 extern int viafb_LCD_ON;
 extern int viafb_DVI_ON;
 extern int viafb_hotplug;
-extern int viafb_memsize;
 
 extern int strict_strtoul(const char *cp, unsigned int base,
 	unsigned long *res);
 
-void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
-			  int mode_index);
-int viafb_get_mode_index(int hres, int vres);
 u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
 	*plvds_setting_info, struct lvds_chip_information
 	*plvds_chip_info, u8 index);
diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c
index b74f8a6..af50e24 100644
--- a/drivers/video/via/viamode.c
+++ b/drivers/video/via/viamode.c
@@ -412,7 +412,7 @@
 };
 
 struct patch_table res_patch_table[] = {
-	{VIA_RES_1024X768, ARRAY_SIZE(PM1024x768), PM1024x768}
+	{ARRAY_SIZE(PM1024x768), PM1024x768}
 };
 
 /* struct VPITTable {
@@ -879,169 +879,151 @@
 	 {2800, 2048, 2048, 752, 2200, 224, 1592, 1536, 1536, 56, 1539, 4} }
 };
 
-/* Video Mode Table */
-/* struct VideoModeTable {*/
-/*  int                               ModeIndex;*/
-/*  struct crt_mode_table             *crtc;*/
-/*  int                               mode_array;*/
-/* };*/
-struct VideoModeTable CLE266Modes[] = {
+struct VideoModeTable viafb_modes[] = {
 	/* Display : 480x640 (GTF) */
-	{VIA_RES_480X640, CRTM480x640, ARRAY_SIZE(CRTM480x640)},
+	{CRTM480x640, ARRAY_SIZE(CRTM480x640)},
 
 	/* Display : 640x480 */
-	{VIA_RES_640X480, CRTM640x480, ARRAY_SIZE(CRTM640x480)},
+	{CRTM640x480, ARRAY_SIZE(CRTM640x480)},
 
 	/* Display : 720x480 (GTF) */
-	{VIA_RES_720X480, CRTM720x480, ARRAY_SIZE(CRTM720x480)},
+	{CRTM720x480, ARRAY_SIZE(CRTM720x480)},
 
 	/* Display : 720x576 (GTF) */
-	{VIA_RES_720X576, CRTM720x576, ARRAY_SIZE(CRTM720x576)},
+	{CRTM720x576, ARRAY_SIZE(CRTM720x576)},
 
 	/* Display : 800x600 */
-	{VIA_RES_800X600, CRTM800x600, ARRAY_SIZE(CRTM800x600)},
+	{CRTM800x600, ARRAY_SIZE(CRTM800x600)},
 
 	/* Display : 800x480 (CVT) */
-	{VIA_RES_800X480, CRTM800x480, ARRAY_SIZE(CRTM800x480)},
+	{CRTM800x480, ARRAY_SIZE(CRTM800x480)},
 
 	/* Display : 848x480 (CVT) */
-	{VIA_RES_848X480, CRTM848x480, ARRAY_SIZE(CRTM848x480)},
+	{CRTM848x480, ARRAY_SIZE(CRTM848x480)},
 
 	/* Display : 852x480 (GTF) */
-	{VIA_RES_856X480, CRTM852x480, ARRAY_SIZE(CRTM852x480)},
+	{CRTM852x480, ARRAY_SIZE(CRTM852x480)},
 
 	/* Display : 1024x512 (GTF) */
-	{VIA_RES_1024X512, CRTM1024x512, ARRAY_SIZE(CRTM1024x512)},
+	{CRTM1024x512, ARRAY_SIZE(CRTM1024x512)},
 
 	/* Display : 1024x600 */
-	{VIA_RES_1024X600, CRTM1024x600, ARRAY_SIZE(CRTM1024x600)},
-
-	/* Display : 1024x576 (GTF) */
-	/*{ VIA_RES_1024X576, CRTM1024x576, ARRAY_SIZE(CRTM1024x576)}, */
+	{CRTM1024x600, ARRAY_SIZE(CRTM1024x600)},
 
 	/* Display : 1024x768 */
-	{VIA_RES_1024X768, CRTM1024x768, ARRAY_SIZE(CRTM1024x768)},
+	{CRTM1024x768, ARRAY_SIZE(CRTM1024x768)},
 
 	/* Display : 1152x864 */
-	{VIA_RES_1152X864, CRTM1152x864, ARRAY_SIZE(CRTM1152x864)},
+	{CRTM1152x864, ARRAY_SIZE(CRTM1152x864)},
 
 	/* Display : 1280x768 (GTF) */
-	{VIA_RES_1280X768, CRTM1280x768, ARRAY_SIZE(CRTM1280x768)},
+	{CRTM1280x768, ARRAY_SIZE(CRTM1280x768)},
 
 	/* Display : 960x600 (CVT) */
-	{VIA_RES_960X600, CRTM960x600, ARRAY_SIZE(CRTM960x600)},
+	{CRTM960x600, ARRAY_SIZE(CRTM960x600)},
 
 	/* Display : 1000x600 (GTF) */
-	{VIA_RES_1000X600, CRTM1000x600, ARRAY_SIZE(CRTM1000x600)},
+	{CRTM1000x600, ARRAY_SIZE(CRTM1000x600)},
 
 	/* Display : 1024x576 (GTF) */
-	{VIA_RES_1024X576, CRTM1024x576, ARRAY_SIZE(CRTM1024x576)},
+	{CRTM1024x576, ARRAY_SIZE(CRTM1024x576)},
 
 	/* Display : 1088x612 (GTF) */
-	{VIA_RES_1088X612, CRTM1088x612, ARRAY_SIZE(CRTM1088x612)},
+	{CRTM1088x612, ARRAY_SIZE(CRTM1088x612)},
 
 	/* Display : 1152x720 (CVT) */
-	{VIA_RES_1152X720, CRTM1152x720, ARRAY_SIZE(CRTM1152x720)},
+	{CRTM1152x720, ARRAY_SIZE(CRTM1152x720)},
 
 	/* Display : 1200x720 (GTF) */
-	{VIA_RES_1200X720, CRTM1200x720, ARRAY_SIZE(CRTM1200x720)},
+	{CRTM1200x720, ARRAY_SIZE(CRTM1200x720)},
 
 	/* Display : 1280x600 (GTF) */
-	{VIA_RES_1280X600, CRTM1280x600, ARRAY_SIZE(CRTM1280x600)},
+	{CRTM1280x600, ARRAY_SIZE(CRTM1280x600)},
 
 	/* Display : 1280x800 (CVT) */
-	{VIA_RES_1280X800, CRTM1280x800, ARRAY_SIZE(CRTM1280x800)},
-
-	/* Display : 1280x800 (GTF) */
-	/*{ M1280x800, CRTM1280x800, ARRAY_SIZE(CRTM1280x800)}, */
+	{CRTM1280x800, ARRAY_SIZE(CRTM1280x800)},
 
 	/* Display : 1280x960 */
-	{VIA_RES_1280X960, CRTM1280x960, ARRAY_SIZE(CRTM1280x960)},
+	{CRTM1280x960, ARRAY_SIZE(CRTM1280x960)},
 
 	/* Display : 1280x1024 */
-	{VIA_RES_1280X1024, CRTM1280x1024, ARRAY_SIZE(CRTM1280x1024)},
+	{CRTM1280x1024, ARRAY_SIZE(CRTM1280x1024)},
 
 	/* Display : 1360x768 (CVT) */
-	{VIA_RES_1360X768, CRTM1360x768, ARRAY_SIZE(CRTM1360x768)},
-
-	/* Display : 1360x768 (CVT Reduce Blanking) */
-	{VIA_RES_1360X768_RB, CRTM1360x768_RB,
-	 ARRAY_SIZE(CRTM1360x768_RB)},
+	{CRTM1360x768, ARRAY_SIZE(CRTM1360x768)},
 
 	/* Display : 1366x768 */
-	{VIA_RES_1366X768, CRTM1366x768, ARRAY_SIZE(CRTM1366x768)},
+	{CRTM1366x768, ARRAY_SIZE(CRTM1366x768)},
 
 	/* Display : 1368x768 (GTF) */
-	/*{ M1368x768,CRTM1368x768,ARRAY_SIZE(CRTM1368x768)}, */
-	/* Display : 1368x768 (GTF) */
-	{VIA_RES_1368X768, CRTM1368x768, ARRAY_SIZE(CRTM1368x768)},
+	{CRTM1368x768, ARRAY_SIZE(CRTM1368x768)},
 
 	/* Display : 1440x900 (CVT) */
-	{VIA_RES_1440X900, CRTM1440x900, ARRAY_SIZE(CRTM1440x900)},
-
-	/* Display : 1440x900 (CVT Reduce Blanking) */
-	{VIA_RES_1440X900_RB, CRTM1440x900_RB,
-	 ARRAY_SIZE(CRTM1440x900_RB)},
+	{CRTM1440x900, ARRAY_SIZE(CRTM1440x900)},
 
 	/* Display : 1440x1050 (GTF) */
-	{VIA_RES_1440X1050, CRTM1440x1050, ARRAY_SIZE(CRTM1440x1050)},
-
-	/* Display : 1400x1050 (CVT Reduce Blanking) */
-	{VIA_RES_1400X1050_RB, CRTM1400x1050_RB,
-	 ARRAY_SIZE(CRTM1400x1050_RB)},
+	{CRTM1440x1050, ARRAY_SIZE(CRTM1440x1050)},
 
 	/* Display : 1600x900 (CVT) */
-	{VIA_RES_1600X900, CRTM1600x900, ARRAY_SIZE(CRTM1600x900)},
-
-	/* Display : 1600x900 (CVT Reduce Blanking) */
-	{VIA_RES_1600X900_RB, CRTM1600x900_RB,
-	 ARRAY_SIZE(CRTM1600x900_RB)},
+	{CRTM1600x900, ARRAY_SIZE(CRTM1600x900)},
 
 	/* Display : 1600x1024 (GTF) */
-	{VIA_RES_1600X1024, CRTM1600x1024, ARRAY_SIZE(CRTM1600x1024)},
+	{CRTM1600x1024, ARRAY_SIZE(CRTM1600x1024)},
 
 	/* Display : 1600x1200 */
-	{VIA_RES_1600X1200, CRTM1600x1200, ARRAY_SIZE(CRTM1600x1200)},
+	{CRTM1600x1200, ARRAY_SIZE(CRTM1600x1200)},
 
 	/* Display : 1680x1050 (CVT) */
-	{VIA_RES_1680X1050, CRTM1680x1050, ARRAY_SIZE(CRTM1680x1050)},
-
-	/* Display : 1680x1050 (CVT Reduce Blanking) */
-	{VIA_RES_1680X1050_RB, CRTM1680x1050_RB,
-	 ARRAY_SIZE(CRTM1680x1050_RB)},
+	{CRTM1680x1050, ARRAY_SIZE(CRTM1680x1050)},
 
 	/* Display : 1792x1344 (DMT) */
-	{VIA_RES_1792X1344, CRTM1792x1344, ARRAY_SIZE(CRTM1792x1344)},
+	{CRTM1792x1344, ARRAY_SIZE(CRTM1792x1344)},
 
 	/* Display : 1856x1392 (DMT) */
-	{VIA_RES_1856X1392, CRTM1856x1392, ARRAY_SIZE(CRTM1856x1392)},
+	{CRTM1856x1392, ARRAY_SIZE(CRTM1856x1392)},
 
 	/* Display : 1920x1440 */
-	{VIA_RES_1920X1440, CRTM1920x1440, ARRAY_SIZE(CRTM1920x1440)},
+	{CRTM1920x1440, ARRAY_SIZE(CRTM1920x1440)},
 
 	/* Display : 2048x1536 */
-	{VIA_RES_2048X1536, CRTM2048x1536, ARRAY_SIZE(CRTM2048x1536)},
+	{CRTM2048x1536, ARRAY_SIZE(CRTM2048x1536)},
 
 	/* Display : 1280x720 */
-	{VIA_RES_1280X720, CRTM1280x720, ARRAY_SIZE(CRTM1280x720)},
+	{CRTM1280x720, ARRAY_SIZE(CRTM1280x720)},
 
 	/* Display : 1920x1080 (CVT) */
-	{VIA_RES_1920X1080, CRTM1920x1080, ARRAY_SIZE(CRTM1920x1080)},
-
-	/* Display : 1920x1080 (CVT Reduce Blanking) */
-	{VIA_RES_1920X1080_RB, CRTM1920x1080_RB,
-	 ARRAY_SIZE(CRTM1920x1080_RB)},
+	{CRTM1920x1080, ARRAY_SIZE(CRTM1920x1080)},
 
 	/* Display : 1920x1200 (CVT) */
-	{VIA_RES_1920X1200, CRTM1920x1200, ARRAY_SIZE(CRTM1920x1200)},
-
-	/* Display : 1920x1200 (CVT Reduce Blanking) */
-	{VIA_RES_1920X1200_RB, CRTM1920x1200_RB,
-	 ARRAY_SIZE(CRTM1920x1200_RB)},
+	{CRTM1920x1200, ARRAY_SIZE(CRTM1920x1200)},
 
 	/* Display : 1400x1050 (CVT) */
-	{VIA_RES_1400X1050, CRTM1400x1050, ARRAY_SIZE(CRTM1400x1050)}
+	{CRTM1400x1050, ARRAY_SIZE(CRTM1400x1050)}
 };
+
+struct VideoModeTable viafb_rb_modes[] = {
+	/* Display : 1360x768 (CVT Reduce Blanking) */
+	{CRTM1360x768_RB, ARRAY_SIZE(CRTM1360x768_RB)},
+
+	/* Display : 1440x900 (CVT Reduce Blanking) */
+	{CRTM1440x900_RB, ARRAY_SIZE(CRTM1440x900_RB)},
+
+	/* Display : 1400x1050 (CVT Reduce Blanking) */
+	{CRTM1400x1050_RB, ARRAY_SIZE(CRTM1400x1050_RB)},
+
+	/* Display : 1600x900 (CVT Reduce Blanking) */
+	{CRTM1600x900_RB, ARRAY_SIZE(CRTM1600x900_RB)},
+
+	/* Display : 1680x1050 (CVT Reduce Blanking) */
+	{CRTM1680x1050_RB, ARRAY_SIZE(CRTM1680x1050_RB)},
+
+	/* Display : 1920x1080 (CVT Reduce Blanking) */
+	{CRTM1920x1080_RB, ARRAY_SIZE(CRTM1920x1080_RB)},
+
+	/* Display : 1920x1200 (CVT Reduce Blanking) */
+	{CRTM1920x1200_RB, ARRAY_SIZE(CRTM1920x1200_RB)}
+};
+
 struct crt_mode_table CEAM1280x720[] = {
 	{REFRESH_60, CLK_74_270M, M1280X720_CEA_R60_HSP,
 	 M1280X720_CEA_R60_VSP,
@@ -1056,8 +1038,8 @@
 };
 struct VideoModeTable CEA_HDMI_Modes[] = {
 	/* Display : 1280x720 */
-	{VIA_RES_1280X720, CEAM1280x720, ARRAY_SIZE(CEAM1280x720)},
-	{VIA_RES_1920X1080, CEAM1920x1080, ARRAY_SIZE(CEAM1920x1080)}
+	{CEAM1280x720, ARRAY_SIZE(CEAM1280x720)},
+	{CEAM1920x1080, ARRAY_SIZE(CEAM1920x1080)}
 };
 
 int NUM_TOTAL_RES_MAP_REFRESH = ARRAY_SIZE(res_map_refresh_tbl);
@@ -1069,4 +1051,28 @@
 int NUM_TOTAL_VX855_ModeXregs = ARRAY_SIZE(VX855_ModeXregs);
 int NUM_TOTAL_CLE266_ModeXregs = ARRAY_SIZE(CLE266_ModeXregs);
 int NUM_TOTAL_PATCH_MODE = ARRAY_SIZE(res_patch_table);
-int NUM_TOTAL_MODETABLE = ARRAY_SIZE(CLE266Modes);
+
+
+struct VideoModeTable *viafb_get_mode(int hres, int vres)
+{
+	u32 i;
+	for (i = 0; i < ARRAY_SIZE(viafb_modes); i++)
+		if (viafb_modes[i].mode_array &&
+			viafb_modes[i].crtc[0].crtc.hor_addr == hres &&
+			viafb_modes[i].crtc[0].crtc.ver_addr == vres)
+			return &viafb_modes[i];
+
+	return NULL;
+}
+
+struct VideoModeTable *viafb_get_rb_mode(int hres, int vres)
+{
+	u32 i;
+	for (i = 0; i < ARRAY_SIZE(viafb_rb_modes); i++)
+		if (viafb_rb_modes[i].mode_array &&
+			viafb_rb_modes[i].crtc[0].crtc.hor_addr == hres &&
+			viafb_rb_modes[i].crtc[0].crtc.ver_addr == vres)
+			return &viafb_rb_modes[i];
+
+	return NULL;
+}
diff --git a/drivers/video/via/viamode.h b/drivers/video/via/viamode.h
index a9d6554..5b1ced8 100644
--- a/drivers/video/via/viamode.h
+++ b/drivers/video/via/viamode.h
@@ -32,13 +32,11 @@
 };
 
 struct VideoModeTable {
-	int ModeIndex;
 	struct crt_mode_table *crtc;
 	int mode_array;
 };
 
 struct patch_table {
-	int mode_index;
 	int table_length;
 	struct io_reg *io_reg_table;
 };
@@ -59,13 +57,11 @@
 extern int NUM_TOTAL_VX855_ModeXregs;
 extern int NUM_TOTAL_CLE266_ModeXregs;
 extern int NUM_TOTAL_PATCH_MODE;
-extern int NUM_TOTAL_MODETABLE;
 
 /********************/
 /* Mode Table       */
 /********************/
 
-extern struct VideoModeTable CLE266Modes[];
 extern struct crt_mode_table CEAM1280x720[];
 extern struct crt_mode_table CEAM1920x1080[];
 extern struct VideoModeTable CEA_HDMI_Modes[];
@@ -81,4 +77,8 @@
 extern struct io_reg PM1024x768[];
 extern struct patch_table res_patch_table[];
 extern struct VPITTable VPIT;
+
+struct VideoModeTable *viafb_get_mode(int hres, int vres);
+struct VideoModeTable *viafb_get_rb_mode(int hres, int vres);
+
 #endif /* __VIAMODE_H__ */
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index 2376f68..5d22395 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -628,7 +628,7 @@
 #endif
 
 
-int __init w100fb_probe(struct platform_device *pdev)
+int __devinit w100fb_probe(struct platform_device *pdev)
 {
 	int err = -EIO;
 	struct w100fb_mach_info *inf;
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index 406caa6..e5f7441 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -214,7 +214,7 @@
 			 (++retries < DS2482_WAIT_IDLE_TIMEOUT));
 	}
 
-	if (retries > DS2482_WAIT_IDLE_TIMEOUT)
+	if (retries >= DS2482_WAIT_IDLE_TIMEOUT)
 		printk(KERN_ERR "%s: timeout on channel %d\n",
 		       __func__, pdev->channel);
 
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index 65244c0..4926703 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -102,7 +102,7 @@
 	return ((__raw_readb(ctrl_addr)) >> 3) & 0x1;
 }
 
-static int __init mxc_w1_probe(struct platform_device *pdev)
+static int __devinit mxc_w1_probe(struct platform_device *pdev)
 {
 	struct mxc_w1_device *mdev;
 	struct resource *res;
@@ -166,7 +166,7 @@
 /*
  * disassociate the w1 device from the driver
  */
-static int mxc_w1_remove(struct platform_device *pdev)
+static int __devexit mxc_w1_remove(struct platform_device *pdev)
 {
 	struct mxc_w1_device *mdev = platform_get_drvdata(pdev);
 	struct resource *res;
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 0d92969..22977d3 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -72,7 +72,7 @@
 	int			init_trans;
 };
 
-static int __init omap_hdq_probe(struct platform_device *pdev);
+static int __devinit omap_hdq_probe(struct platform_device *pdev);
 static int omap_hdq_remove(struct platform_device *pdev);
 
 static struct platform_driver omap_hdq_driver = {
@@ -558,7 +558,7 @@
 	return;
 }
 
-static int __init omap_hdq_probe(struct platform_device *pdev)
+static int __devinit omap_hdq_probe(struct platform_device *pdev)
 {
 	struct hdq_data *hdq_data;
 	struct resource *res;
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index acc7e3b..ad5897d 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -986,7 +986,7 @@
 	return 0;
 }
 
-static int w1_init(void)
+static int __init w1_init(void)
 {
 	int retval;
 
@@ -1034,7 +1034,7 @@
 	return retval;
 }
 
-static void w1_fini(void)
+static void __exit w1_fini(void)
 {
 	struct w1_master *dev;
 
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 3da3f48..bdcdbd5 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -55,6 +55,11 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called softdog.
 
+config MAX63XX_WATCHDOG
+       tristate "Max63xx watchdog"
+       help
+         Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
+
 config WM831X_WATCHDOG
 	tristate "WM831x watchdog"
 	depends on MFD_WM831X
@@ -289,6 +294,17 @@
 	  Say Y here if you want support for the watchdog timer on Avionic
 	  Design Xanthos boards.
 
+config TS72XX_WATCHDOG
+	tristate "TS-72XX SBC Watchdog"
+	depends on MACH_TS72XX
+	help
+	  Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
+	  watchdog timer implemented in a external CPLD chip. Say Y here
+	  if you want to support for the watchdog timer on TS-72XX boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ts72xx_wdt.
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
@@ -845,10 +861,10 @@
 # POWERPC Architecture
 
 config GEF_WDT
-	tristate "GE Fanuc Watchdog Timer"
+	tristate "GE Watchdog Timer"
 	depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
 	---help---
-	  Watchdog timer found in a number of GE Fanuc single board computers.
+	  Watchdog timer found in a number of GE single board computers.
 
 config MPC5200_WDT
 	bool "MPC52xx Watchdog Timer"
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 475c611..5e3cb95 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -46,6 +46,7 @@
 obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
 obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
 obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
+obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
@@ -142,4 +143,5 @@
 # Architecture Independant
 obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
 obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
+obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
 obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c
index 4d18c87..2ffce4d 100644
--- a/drivers/watchdog/acquirewdt.c
+++ b/drivers/watchdog/acquirewdt.c
@@ -150,7 +150,7 @@
 	int options, retval = -EINVAL;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = WATCHDOG_NAME,
diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c
index 824d076a..4d40965 100644
--- a/drivers/watchdog/advantechwdt.c
+++ b/drivers/watchdog/advantechwdt.c
@@ -137,7 +137,7 @@
 	int new_timeout;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING |
 			   WDIOF_SETTIMEOUT |
 			   WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/adx_wdt.c b/drivers/watchdog/adx_wdt.c
index 9d7d155..a5ca7a6 100644
--- a/drivers/watchdog/adx_wdt.c
+++ b/drivers/watchdog/adx_wdt.c
@@ -37,7 +37,7 @@
 	spinlock_t lock;
 };
 
-static struct watchdog_info adx_wdt_info = {
+static const struct watchdog_info adx_wdt_info = {
 	.identity = "Avionic Design Xanthos Watchdog",
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 };
diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c
index 937a80f..1e9caea 100644
--- a/drivers/watchdog/alim1535_wdt.c
+++ b/drivers/watchdog/alim1535_wdt.c
@@ -180,7 +180,7 @@
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_KEEPALIVEPING |
 					WDIOF_SETTIMEOUT |
 					WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c
index f90afdb..d8d4da9 100644
--- a/drivers/watchdog/alim7101_wdt.c
+++ b/drivers/watchdog/alim7101_wdt.c
@@ -238,7 +238,7 @@
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
 							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index 2bb95cd..c764c52 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -219,7 +219,7 @@
 static long ar7_wdt_ioctl(struct file *file,
 					unsigned int cmd, unsigned long arg)
 {
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.identity = LONGNAME,
 		.firmware_version = 1,
 		.options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
index 0378479..6873376 100644
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ b/drivers/watchdog/at32ap700x_wdt.c
@@ -202,7 +202,7 @@
 	return status;
 }
 
-static struct watchdog_info at32_wdt_info = {
+static const struct watchdog_info at32_wdt_info = {
 	.identity	= "at32ap700x watchdog",
 	.options	= WDIOF_SETTIMEOUT |
 			  WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index b185daf..b3046dc 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -121,7 +121,7 @@
 	return 0;
 }
 
-static struct watchdog_info at91_wdt_info = {
+static const struct watchdog_info at91_wdt_info = {
 	.identity	= "at91 watchdog",
 	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 };
diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c
index 751c003..5f24552 100644
--- a/drivers/watchdog/bcm47xx_wdt.c
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -149,7 +149,7 @@
 	return len;
 }
 
-static struct watchdog_info bcm47xx_wdt_info = {
+static const struct watchdog_info bcm47xx_wdt_info = {
 	.identity 	= DRV_NAME,
 	.options 	= WDIOF_SETTIMEOUT |
 				WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index 2159e66..9c7ccd1 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -19,8 +19,6 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/fs.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/uaccess.h>
@@ -74,7 +72,7 @@
 
 static unsigned int timeout = WATCHDOG_TIMEOUT;
 static int nowayout = WATCHDOG_NOWAYOUT;
-static struct watchdog_info bfin_wdt_info;
+static const struct watchdog_info bfin_wdt_info;
 static unsigned long open_check;
 static char expect_close;
 static DEFINE_SPINLOCK(bfin_wdt_spinlock);
@@ -309,26 +307,6 @@
 	}
 }
 
-/**
- *	bfin_wdt_notify_sys - Notifier Handler
- *	@this: notifier block
- *	@code: notifier event
- *	@unused: unused
- *
- *	Handles specific events, such as turning off the watchdog during a
- *	shutdown event.
- */
-static int bfin_wdt_notify_sys(struct notifier_block *this,
-					unsigned long code, void *unused)
-{
-	stampit();
-
-	if (code == SYS_DOWN || code == SYS_HALT)
-		bfin_wdt_stop();
-
-	return NOTIFY_DONE;
-}
-
 #ifdef CONFIG_PM
 static int state_before_suspend;
 
@@ -388,40 +366,28 @@
 	.fops     = &bfin_wdt_fops,
 };
 
-static struct watchdog_info bfin_wdt_info = {
+static const struct watchdog_info bfin_wdt_info = {
 	.identity = "Blackfin Watchdog",
 	.options  = WDIOF_SETTIMEOUT |
 		    WDIOF_KEEPALIVEPING |
 		    WDIOF_MAGICCLOSE,
 };
 
-static struct notifier_block bfin_wdt_notifier = {
-	.notifier_call = bfin_wdt_notify_sys,
-};
-
 /**
  *	bfin_wdt_probe - Initialize module
  *
- *	Registers the misc device and notifier handler.  Actual device
+ *	Registers the misc device.  Actual device
  *	initialization is handled by bfin_wdt_open().
  */
 static int __devinit bfin_wdt_probe(struct platform_device *pdev)
 {
 	int ret;
 
-	ret = register_reboot_notifier(&bfin_wdt_notifier);
-	if (ret) {
-		pr_devinit(KERN_ERR PFX
-			"cannot register reboot notifier (err=%d)\n", ret);
-		return ret;
-	}
-
 	ret = misc_register(&bfin_wdt_miscdev);
 	if (ret) {
 		pr_devinit(KERN_ERR PFX
 			"cannot register miscdev on minor=%d (err=%d)\n",
 				WATCHDOG_MINOR, ret);
-		unregister_reboot_notifier(&bfin_wdt_notifier);
 		return ret;
 	}
 
@@ -434,21 +400,33 @@
 /**
  *	bfin_wdt_remove - Initialize module
  *
- *	Unregisters the misc device and notifier handler.  Actual device
+ *	Unregisters the misc device.  Actual device
  *	deinitialization is handled by bfin_wdt_close().
  */
 static int __devexit bfin_wdt_remove(struct platform_device *pdev)
 {
 	misc_deregister(&bfin_wdt_miscdev);
-	unregister_reboot_notifier(&bfin_wdt_notifier);
 	return 0;
 }
 
+/**
+ *	bfin_wdt_shutdown - Soft Shutdown Handler
+ *
+ *	Handles the soft shutdown event.
+ */
+static void bfin_wdt_shutdown(struct platform_device *pdev)
+{
+	stampit();
+
+	bfin_wdt_stop();
+}
+
 static struct platform_device *bfin_wdt_device;
 
 static struct platform_driver bfin_wdt_driver = {
 	.probe     = bfin_wdt_probe,
 	.remove    = __devexit_p(bfin_wdt_remove),
+	.shutdown  = bfin_wdt_shutdown,
 	.suspend   = bfin_wdt_suspend,
 	.resume    = bfin_wdt_resume,
 	.driver    = {
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index e8380ef..8b724aa 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -121,7 +121,7 @@
 	return count;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	.identity = "PowerPC Book-E Watchdog",
 };
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
index 923cc68..9291506 100644
--- a/drivers/watchdog/coh901327_wdt.c
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -257,7 +257,7 @@
 		struct watchdog_info __user *ident;
 		int __user *i;
 	} uarg;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options		= WDIOF_CARDRESET |
 					  WDIOF_SETTIMEOUT |
 					  WDIOF_KEEPALIVEPING,
diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c
index 71f6d7e..edd3475 100644
--- a/drivers/watchdog/cpu5wdt.c
+++ b/drivers/watchdog/cpu5wdt.c
@@ -154,7 +154,7 @@
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	unsigned int value;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_CARDRESET,
 		.identity = "CPU5 WDT",
 	};
diff --git a/drivers/watchdog/cpwd.c b/drivers/watchdog/cpwd.c
index 081f295..37ea052 100644
--- a/drivers/watchdog/cpwd.c
+++ b/drivers/watchdog/cpwd.c
@@ -403,7 +403,7 @@
 
 static long cpwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	static struct watchdog_info info = {
+	static const struct watchdog_info info = {
 		.options		= WDIOF_SETTIMEOUT,
 		.firmware_version	= 1,
 		.identity		= DRIVER_NAME,
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 887136d..56162c8 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -142,7 +142,7 @@
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_KEEPALIVEPING,
 	.identity = "DaVinci Watchdog",
 };
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index cdd55e0..88ed54e 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -131,7 +131,7 @@
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE,
 	.identity = "EP93xx Watchdog",
 };
diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c
index 9add354..d1c4e55 100644
--- a/drivers/watchdog/eurotechwdt.c
+++ b/drivers/watchdog/eurotechwdt.c
@@ -238,7 +238,7 @@
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options	  = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
 							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index 734d980..abdbad0 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc watchdog userspace interface
+ * GE watchdog userspace interface
  *
- * Author:  Martyn Welch <martyn.welch@gefanuc.com>
+ * Author:  Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -161,11 +161,11 @@
 	int timeout;
 	int options;
 	void __user *argp = (void __user *)arg;
-	static struct watchdog_info info = {
+	static const struct watchdog_info info = {
 		.options =	WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
 				WDIOF_KEEPALIVEPING,
 		.firmware_version = 0,
-		.identity = "GE Fanuc watchdog",
+		.identity = "GE watchdog",
 	};
 
 	switch (cmd) {
@@ -311,7 +311,7 @@
 
 static int __init gef_wdt_init(void)
 {
-	printk(KERN_INFO "GE Fanuc watchdog driver\n");
+	printk(KERN_INFO "GE watchdog driver\n");
 	return of_register_platform_driver(&gef_wdt_driver);
 }
 
@@ -323,8 +323,8 @@
 module_init(gef_wdt_init);
 module_exit(gef_wdt_exit);
 
-MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com>");
-MODULE_DESCRIPTION("GE Fanuc watchdog driver");
+MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
+MODULE_DESCRIPTION("GE watchdog driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 MODULE_ALIAS("platform: gef_wdt");
diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c
index 38252ff..9b49b12 100644
--- a/drivers/watchdog/geodewdt.c
+++ b/drivers/watchdog/geodewdt.c
@@ -142,7 +142,7 @@
 	int __user *p = argp;
 	int interval;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
 		| WDIOF_MAGICCLOSE,
 		.firmware_version =     1,
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index a6c5674..70c2c24 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -554,7 +554,7 @@
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT |
 		   WDIOF_KEEPALIVEPING |
 		   WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
index 7ba0b11..bb9750a 100644
--- a/drivers/watchdog/i6300esb.c
+++ b/drivers/watchdog/i6300esb.c
@@ -34,7 +34,6 @@
 #include <linux/mm.h>
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
-#include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
@@ -42,7 +41,7 @@
 #include <linux/io.h>
 
 /* Module and version information */
-#define ESB_VERSION "0.04"
+#define ESB_VERSION "0.05"
 #define ESB_MODULE_NAME "i6300ESB timer"
 #define ESB_DRIVER_NAME ESB_MODULE_NAME ", v" ESB_VERSION
 #define PFX ESB_MODULE_NAME ": "
@@ -65,7 +64,7 @@
 /* Config register bits */
 #define ESB_WDT_REBOOT  (0x01 << 5)   /* Enable reboot on timeout          */
 #define ESB_WDT_FREQ    (0x01 << 2)   /* Decrement frequency               */
-#define ESB_WDT_INTTYPE (0x11 << 0)   /* Interrupt type on timer1 timeout  */
+#define ESB_WDT_INTTYPE (0x03 << 0)   /* Interrupt type on timer1 timeout  */
 
 /* Reload register bits */
 #define ESB_WDT_TIMEOUT (0x01 << 9)    /* Watchdog timed out                */
@@ -82,7 +81,9 @@
 static struct pci_dev *esb_pci;
 static unsigned short triggered; /* The status of the watchdog upon boot */
 static char esb_expect_close;
-static struct platform_device *esb_platform_device;
+
+/* We can only use 1 card due to the /dev/watchdog restriction */
+static int cards_found;
 
 /* module parameters */
 /* 30 sec default heartbeat (1 < heartbeat < 2*1023) */
@@ -111,8 +112,8 @@
  */
 static inline void esb_unlock_registers(void)
 {
-	writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
-	writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
+	writew(ESB_UNLOCK1, ESB_RELOAD_REG);
+	writew(ESB_UNLOCK2, ESB_RELOAD_REG);
 }
 
 static int esb_timer_start(void)
@@ -256,7 +257,7 @@
 	int new_heartbeat;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
@@ -332,11 +333,6 @@
 
 /*
  * Data for PCI driver interface
- *
- * This data only exists for exporting the supported
- * PCI ids via MODULE_DEVICE_TABLE.  We do not actually
- * register a pci_driver, because someone else might one day
- * want to register another driver on the same PCI id.
  */
 static struct pci_device_id esb_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
@@ -348,29 +344,19 @@
  *      Init & exit routines
  */
 
-static unsigned char __devinit esb_getdevice(void)
+static unsigned char __devinit esb_getdevice(struct pci_dev *pdev)
 {
-	/*
-	 *      Find the PCI device
-	 */
-
-	esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL,
-					PCI_DEVICE_ID_INTEL_ESB_9, NULL);
-
-	if (!esb_pci)
-		return 0;
-
-	if (pci_enable_device(esb_pci)) {
+	if (pci_enable_device(pdev)) {
 		printk(KERN_ERR PFX "failed to enable device\n");
 		goto err_devput;
 	}
 
-	if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
+	if (pci_request_region(pdev, 0, ESB_MODULE_NAME)) {
 		printk(KERN_ERR PFX "failed to request region\n");
 		goto err_disable;
 	}
 
-	BASEADDR = pci_ioremap_bar(esb_pci, 0);
+	BASEADDR = pci_ioremap_bar(pdev, 0);
 	if (BASEADDR == NULL) {
 		/* Something's wrong here, BASEADDR has to be set */
 		printk(KERN_ERR PFX "failed to get BASEADDR\n");
@@ -378,14 +364,14 @@
 	}
 
 	/* Done */
+	esb_pci = pdev;
 	return 1;
 
 err_release:
-	pci_release_region(esb_pci, 0);
+	pci_release_region(pdev, 0);
 err_disable:
-	pci_disable_device(esb_pci);
+	pci_disable_device(pdev);
 err_devput:
-	pci_dev_put(esb_pci);
 	return 0;
 }
 
@@ -430,12 +416,23 @@
 	esb_timer_set_heartbeat(heartbeat);
 }
 
-static int __devinit esb_probe(struct platform_device *dev)
+static int __devinit esb_probe(struct pci_dev *pdev,
+		const struct pci_device_id *ent)
 {
 	int ret;
 
+	cards_found++;
+	if (cards_found == 1)
+		printk(KERN_INFO PFX "Intel 6300ESB WatchDog Timer Driver v%s\n",
+			ESB_VERSION);
+
+	if (cards_found > 1) {
+		printk(KERN_ERR PFX "This driver only supports 1 device\n");
+		return -ENODEV;
+	}
+
 	/* Check whether or not the hardware watchdog is there */
-	if (!esb_getdevice() || esb_pci == NULL)
+	if (!esb_getdevice(pdev) || esb_pci == NULL)
 		return -ENODEV;
 
 	/* Check that the heartbeat value is within it's range;
@@ -467,11 +464,11 @@
 	iounmap(BASEADDR);
 	pci_release_region(esb_pci, 0);
 	pci_disable_device(esb_pci);
-	pci_dev_put(esb_pci);
+	esb_pci = NULL;
 	return ret;
 }
 
-static int __devexit esb_remove(struct platform_device *dev)
+static void __devexit esb_remove(struct pci_dev *pdev)
 {
 	/* Stop the timer before we leave */
 	if (!nowayout)
@@ -482,54 +479,30 @@
 	iounmap(BASEADDR);
 	pci_release_region(esb_pci, 0);
 	pci_disable_device(esb_pci);
-	pci_dev_put(esb_pci);
-	return 0;
+	esb_pci = NULL;
 }
 
-static void esb_shutdown(struct platform_device *dev)
+static void esb_shutdown(struct pci_dev *pdev)
 {
 	esb_timer_stop();
 }
 
-static struct platform_driver esb_platform_driver = {
+static struct pci_driver esb_driver = {
+	.name		= ESB_MODULE_NAME,
+	.id_table	= esb_pci_tbl,
 	.probe          = esb_probe,
 	.remove         = __devexit_p(esb_remove),
 	.shutdown       = esb_shutdown,
-	.driver         = {
-		.owner  = THIS_MODULE,
-		.name   = ESB_MODULE_NAME,
-	},
 };
 
 static int __init watchdog_init(void)
 {
-	int err;
-
-	printk(KERN_INFO PFX "Intel 6300ESB WatchDog Timer Driver v%s\n",
-		ESB_VERSION);
-
-	err = platform_driver_register(&esb_platform_driver);
-	if (err)
-		return err;
-
-	esb_platform_device = platform_device_register_simple(ESB_MODULE_NAME,
-								-1, NULL, 0);
-	if (IS_ERR(esb_platform_device)) {
-		err = PTR_ERR(esb_platform_device);
-		goto unreg_platform_driver;
-	}
-
-	return 0;
-
-unreg_platform_driver:
-	platform_driver_unregister(&esb_platform_driver);
-	return err;
+	return pci_register_driver(&esb_driver);
 }
 
 static void __exit watchdog_cleanup(void)
 {
-	platform_device_unregister(esb_platform_device);
-	platform_driver_unregister(&esb_platform_driver);
+	pci_unregister_driver(&esb_driver);
 	printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
 }
 
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 4bdb7f1..44bc6aa 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -584,7 +584,7 @@
 	int new_heartbeat;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
@@ -698,7 +698,7 @@
 	if (iTCO_wdt_private.iTCO_version == 2) {
 		pci_read_config_dword(pdev, 0xf0, &base_address);
 		if ((base_address & 1) == 0) {
-			printk(KERN_ERR PFX "RCBA is disabled by harddware\n");
+			printk(KERN_ERR PFX "RCBA is disabled by hardware\n");
 			ret = -ENODEV;
 			goto out;
 		}
@@ -708,8 +708,8 @@
 
 	/* Check chipset's NO_REBOOT bit */
 	if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) {
-		printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, "
-					"reboot disabled by hardware\n");
+		printk(KERN_INFO PFX "unable to reset NO_REBOOT flag, "
+					"platform may have disabled it\n");
 		ret = -ENODEV;	/* Cannot reset NO_REBOOT bit */
 		goto out_unmap;
 	}
@@ -805,6 +805,7 @@
 
 static int __devinit iTCO_wdt_probe(struct platform_device *dev)
 {
+	int ret = -ENODEV;
 	int found = 0;
 	struct pci_dev *pdev = NULL;
 	const struct pci_device_id *ent;
@@ -814,19 +815,17 @@
 	for_each_pci_dev(pdev) {
 		ent = pci_match_id(iTCO_wdt_pci_tbl, pdev);
 		if (ent) {
-			if (!(iTCO_wdt_init(pdev, ent, dev))) {
-				found++;
+			found++;
+			ret = iTCO_wdt_init(pdev, ent, dev);
+			if (!ret)
 				break;
-			}
 		}
 	}
 
-	if (!found) {
+	if (!found)
 		printk(KERN_INFO PFX "No card detected\n");
-		return -ENODEV;
-	}
 
-	return 0;
+	return ret;
 }
 
 static int __devexit iTCO_wdt_remove(struct platform_device *dev)
diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c
index 4bef3dd..0149d8d 100644
--- a/drivers/watchdog/ib700wdt.c
+++ b/drivers/watchdog/ib700wdt.c
@@ -174,7 +174,7 @@
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
 							| WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c
index bea8a12..1cc5609 100644
--- a/drivers/watchdog/indydog.c
+++ b/drivers/watchdog/indydog.c
@@ -111,7 +111,7 @@
 							unsigned long arg)
 {
 	int options, retval = -EINVAL;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options		= WDIOF_KEEPALIVEPING,
 		.firmware_version	= 0,
 		.identity		= "Hardware Watchdog for SGI IP22",
diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c
index daed48d..f52c162 100644
--- a/drivers/watchdog/it8712f_wdt.c
+++ b/drivers/watchdog/it8712f_wdt.c
@@ -236,7 +236,7 @@
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.identity = "IT8712F Watchdog",
 		.firmware_version = 1,
 		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c
index cc133c5..b709b3b 100644
--- a/drivers/watchdog/it87_wdt.c
+++ b/drivers/watchdog/it87_wdt.c
@@ -421,7 +421,7 @@
 	return count;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
 	.firmware_version =	1,
 	.identity = WATCHDOG_NAME,
diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c
index 3c79dc5..e86952a 100644
--- a/drivers/watchdog/ixp2000_wdt.c
+++ b/drivers/watchdog/ixp2000_wdt.c
@@ -100,7 +100,7 @@
 }
 
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
 				WDIOF_KEEPALIVEPING,
 	.identity	= "IXP2000 Watchdog",
diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c
index 147b4d5..e02c0ec 100644
--- a/drivers/watchdog/ixp4xx_wdt.c
+++ b/drivers/watchdog/ixp4xx_wdt.c
@@ -89,7 +89,7 @@
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
 			  WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	.identity	= "IXP4xx Watchdog",
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index e1c8276..2852bb2 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -145,7 +145,7 @@
 	return 0;
 }
 
-static struct watchdog_info ks8695_wdt_info = {
+static const struct watchdog_info ks8695_wdt_info = {
 	.identity	= "ks8695 watchdog",
 	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 };
diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c
index 47d7197..2d118cf 100644
--- a/drivers/watchdog/machzwd.c
+++ b/drivers/watchdog/machzwd.c
@@ -101,7 +101,7 @@
 
 #define PFX "machzwd"
 
-static struct watchdog_info zf_info = {
+static const struct watchdog_info zf_info = {
 	.options		= WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 	.firmware_version	= 1,
 	.identity		= "ZF-Logic watchdog",
diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c
new file mode 100644
index 0000000..6eb91d7
--- /dev/null
+++ b/drivers/watchdog/max63xx_wdt.c
@@ -0,0 +1,397 @@
+/*
+ * drivers/char/watchdog/max63xx_wdt.c
+ *
+ * Driver for max63{69,70,71,72,73,74} watchdog timers
+ *
+ * Copyright (C) 2009 Marc Zyngier <maz@misterjones.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This driver assumes the watchdog pins are memory mapped (as it is
+ * the case for the Arcom Zeus). Should it be connected over GPIOs or
+ * another interface, some abstraction will have to be introduced.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/device.h>
+
+#define DEFAULT_HEARTBEAT 60
+#define MAX_HEARTBEAT     60
+
+static int heartbeat = DEFAULT_HEARTBEAT;
+static int nowayout  = WATCHDOG_NOWAYOUT;
+
+/*
+ * Memory mapping: a single byte, 3 first lower bits to select bit 3
+ * to ping the watchdog.
+ */
+#define MAX6369_WDSET	(7 << 0)
+#define MAX6369_WDI   	(1 << 3)
+
+static DEFINE_SPINLOCK(io_lock);
+
+static unsigned long wdt_status;
+#define WDT_IN_USE	0
+#define WDT_RUNNING	1
+#define WDT_OK_TO_CLOSE 2
+
+static int nodelay;
+static struct resource	*wdt_mem;
+static void __iomem	*wdt_base;
+static struct platform_device *max63xx_pdev;
+
+/*
+ * The timeout values used are actually the absolute minimum the chip
+ * offers. Typical values on my board are slightly over twice as long
+ * (10s setting ends up with a 25s timeout), and can be up to 3 times
+ * the nominal setting (according to the datasheet). So please take
+ * these values with a grain of salt. Same goes for the initial delay
+ * "feature". Only max6373/74 have a few settings without this initial
+ * delay (selected with the "nodelay" parameter).
+ *
+ * I also decided to remove from the tables any timeout smaller than a
+ * second, as it looked completly overkill...
+ */
+
+/* Timeouts in second */
+struct max63xx_timeout {
+	u8 wdset;
+	u8 tdelay;
+	u8 twd;
+};
+
+static struct max63xx_timeout max6369_table[] = {
+	{ 5,  1,  1 },
+	{ 6, 10, 10 },
+	{ 7, 60, 60 },
+	{ },
+};
+
+static struct max63xx_timeout max6371_table[] = {
+	{ 6, 60,  3 },
+	{ 7, 60, 60 },
+	{ },
+};
+
+static struct max63xx_timeout max6373_table[] = {
+	{ 2, 60,  1 },
+	{ 5,  0,  1 },
+	{ 1,  3,  3 },
+	{ 7, 60, 10 },
+	{ 6,  0, 10 },
+	{ },
+};
+
+static struct max63xx_timeout *current_timeout;
+
+static struct max63xx_timeout *
+max63xx_select_timeout(struct max63xx_timeout *table, int value)
+{
+	while (table->twd) {
+		if (value <= table->twd) {
+			if (nodelay && table->tdelay == 0)
+				return table;
+
+			if (!nodelay)
+				return table;
+		}
+
+		table++;
+	}
+
+	return NULL;
+}
+
+static void max63xx_wdt_ping(void)
+{
+	u8 val;
+
+	spin_lock(&io_lock);
+
+	val = __raw_readb(wdt_base);
+
+	__raw_writeb(val | MAX6369_WDI, wdt_base);
+	__raw_writeb(val & ~MAX6369_WDI, wdt_base);
+
+	spin_unlock(&io_lock);
+}
+
+static void max63xx_wdt_enable(struct max63xx_timeout *entry)
+{
+	u8 val;
+
+	if (test_and_set_bit(WDT_RUNNING, &wdt_status))
+		return;
+
+	spin_lock(&io_lock);
+
+	val = __raw_readb(wdt_base);
+	val &= ~MAX6369_WDSET;
+	val |= entry->wdset;
+	__raw_writeb(val, wdt_base);
+
+	spin_unlock(&io_lock);
+
+	/* check for a edge triggered startup */
+	if (entry->tdelay == 0)
+		max63xx_wdt_ping();
+}
+
+static void max63xx_wdt_disable(void)
+{
+	spin_lock(&io_lock);
+
+	__raw_writeb(3, wdt_base);
+
+	spin_unlock(&io_lock);
+
+	clear_bit(WDT_RUNNING, &wdt_status);
+}
+
+static int max63xx_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
+		return -EBUSY;
+
+	max63xx_wdt_enable(current_timeout);
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t max63xx_wdt_write(struct file *file, const char *data,
+				 size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+
+				if (c == 'V')
+					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
+			}
+		}
+
+		max63xx_wdt_ping();
+	}
+
+	return len;
+}
+
+static const struct watchdog_info ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.identity = "max63xx Watchdog",
+};
+
+static long max63xx_wdt_ioctl(struct file *file, unsigned int cmd,
+			      unsigned long arg)
+{
+	int ret = -ENOTTY;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user((struct watchdog_info *)arg, &ident,
+				   sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(0, (int *)arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		max63xx_wdt_ping();
+		ret = 0;
+		break;
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(heartbeat, (int *)arg);
+		break;
+	}
+	return ret;
+}
+
+static int max63xx_wdt_release(struct inode *inode, struct file *file)
+{
+	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
+		max63xx_wdt_disable();
+	else
+		dev_crit(&max63xx_pdev->dev,
+			 "device closed unexpectedly - timer will not stop\n");
+
+	clear_bit(WDT_IN_USE, &wdt_status);
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	return 0;
+}
+
+static const struct file_operations max63xx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= max63xx_wdt_write,
+	.unlocked_ioctl	= max63xx_wdt_ioctl,
+	.open		= max63xx_wdt_open,
+	.release	= max63xx_wdt_release,
+};
+
+static struct miscdevice max63xx_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &max63xx_wdt_fops,
+};
+
+static int __devinit max63xx_wdt_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	int size;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct max63xx_timeout *table;
+
+	table = (struct max63xx_timeout *)pdev->id_entry->driver_data;
+
+	if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
+		heartbeat = DEFAULT_HEARTBEAT;
+
+	dev_info(dev, "requesting %ds heartbeat\n", heartbeat);
+	current_timeout = max63xx_select_timeout(table, heartbeat);
+
+	if (!current_timeout) {
+		dev_err(dev, "unable to satisfy heartbeat request\n");
+		return -EINVAL;
+	}
+
+	dev_info(dev, "using %ds heartbeat with %ds initial delay\n",
+		 current_timeout->twd, current_timeout->tdelay);
+
+	heartbeat = current_timeout->twd;
+
+	max63xx_pdev = pdev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "failed to get memory region resource\n");
+		return -ENOENT;
+	}
+
+	size = resource_size(res);
+	wdt_mem = request_mem_region(res->start, size, pdev->name);
+
+	if (wdt_mem == NULL) {
+		dev_err(dev, "failed to get memory region\n");
+		return -ENOENT;
+	}
+
+	wdt_base = ioremap(res->start, size);
+	if (!wdt_base) {
+		dev_err(dev, "failed to map memory region\n");
+		ret = -ENOMEM;
+		goto out_request;
+	}
+
+	ret = misc_register(&max63xx_wdt_miscdev);
+	if (ret < 0) {
+		dev_err(dev, "cannot register misc device\n");
+		goto out_unmap;
+	}
+
+	return 0;
+
+out_unmap:
+	iounmap(wdt_base);
+out_request:
+	release_resource(wdt_mem);
+	kfree(wdt_mem);
+
+	return ret;
+}
+
+static int __devexit max63xx_wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&max63xx_wdt_miscdev);
+	if (wdt_mem) {
+		release_resource(wdt_mem);
+		kfree(wdt_mem);
+		wdt_mem = NULL;
+	}
+
+	if (wdt_base)
+		iounmap(wdt_base);
+
+	return 0;
+}
+
+static struct platform_device_id max63xx_id_table[] = {
+	{ "max6369_wdt", (kernel_ulong_t)max6369_table, },
+	{ "max6370_wdt", (kernel_ulong_t)max6369_table, },
+	{ "max6371_wdt", (kernel_ulong_t)max6371_table, },
+	{ "max6372_wdt", (kernel_ulong_t)max6371_table, },
+	{ "max6373_wdt", (kernel_ulong_t)max6373_table, },
+	{ "max6374_wdt", (kernel_ulong_t)max6373_table, },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, max63xx_id_table);
+
+static struct platform_driver max63xx_wdt_driver = {
+	.probe		= max63xx_wdt_probe,
+	.remove		= __devexit_p(max63xx_wdt_remove),
+	.id_table	= max63xx_id_table,
+	.driver		= {
+		.name	= "max63xx_wdt",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init max63xx_wdt_init(void)
+{
+	return platform_driver_register(&max63xx_wdt_driver);
+}
+
+static void __exit max63xx_wdt_exit(void)
+{
+	platform_driver_unregister(&max63xx_wdt_driver);
+}
+
+module_init(max63xx_wdt_init);
+module_exit(max63xx_wdt_exit);
+
+MODULE_AUTHOR("Marc Zyngier <maz@misterjones.org>");
+MODULE_DESCRIPTION("max63xx Watchdog Driver");
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat,
+		 "Watchdog heartbeat period in seconds from 1 to "
+		 __MODULE_STRING(MAX_HEARTBEAT) ", default "
+		 __MODULE_STRING(DEFAULT_HEARTBEAT));
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+module_param(nodelay, int, 0);
+MODULE_PARM_DESC(nodelay,
+		 "Force selection of a timeout setting without initial delay "
+		 "(max6373/74 only, default=0)");
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c
index 407b025..bc820d1 100644
--- a/drivers/watchdog/mixcomwd.c
+++ b/drivers/watchdog/mixcomwd.c
@@ -201,7 +201,7 @@
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int status;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = "MixCOM watchdog",
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index 38c588e..4e3941c 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -148,7 +148,7 @@
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING,
 		.firmware_version = 1,
 		.identity = "MPC8xxx",
diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c
index a2dc07c..b0646da 100644
--- a/drivers/watchdog/mpcore_wdt.c
+++ b/drivers/watchdog/mpcore_wdt.c
@@ -213,7 +213,7 @@
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options		= WDIOF_SETTIMEOUT |
 				  WDIOF_KEEPALIVEPING |
 				  WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c
index a51dbe4..97f8a48 100644
--- a/drivers/watchdog/mv64x60_wdt.c
+++ b/drivers/watchdog/mv64x60_wdt.c
@@ -179,7 +179,7 @@
 	int timeout;
 	int options;
 	void __user *argp = (void __user *)arg;
-	static struct watchdog_info info = {
+	static const struct watchdog_info info = {
 		.options =	WDIOF_SETTIMEOUT	|
 				WDIOF_MAGICCLOSE	|
 				WDIOF_KEEPALIVEPING,
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index 1a2b916..d3aa2f1 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -407,7 +407,7 @@
 		int __user *i;
 	} uarg;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options          = WDIOF_KEEPALIVEPING |
 				    WDIOF_SETTIMEOUT |
 				    WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c
index aa95123..06f7922 100644
--- a/drivers/watchdog/pcwd.c
+++ b/drivers/watchdog/pcwd.c
@@ -606,7 +606,7 @@
 	int temperature;
 	int new_heartbeat;
 	int __user *argp = (int __user *)arg;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_OVERHEAT |
 					WDIOF_CARDRESET |
 					WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c
index 698f51bf..64374d6 100644
--- a/drivers/watchdog/pcwd_pci.c
+++ b/drivers/watchdog/pcwd_pci.c
@@ -481,7 +481,7 @@
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_OVERHEAT |
 					WDIOF_CARDRESET |
 					WDIOF_KEEPALIVEPING |
diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c
index 052fe45..8e4eacc 100644
--- a/drivers/watchdog/pcwd_usb.c
+++ b/drivers/watchdog/pcwd_usb.c
@@ -404,7 +404,7 @@
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_KEEPALIVEPING |
 					WDIOF_SETTIMEOUT |
 					WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/pika_wdt.c b/drivers/watchdog/pika_wdt.c
index 2d22e99..435ec2a 100644
--- a/drivers/watchdog/pika_wdt.c
+++ b/drivers/watchdog/pika_wdt.c
@@ -52,7 +52,7 @@
 	struct timer_list timer;	/* The timer that pings the watchdog */
 } pikawdt_private;
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.identity	= DRV_NAME,
 	.options	= WDIOF_CARDRESET |
 			  WDIOF_SETTIMEOUT |
diff --git a/drivers/watchdog/pnx833x_wdt.c b/drivers/watchdog/pnx833x_wdt.c
index 538ec2c..09102f0 100644
--- a/drivers/watchdog/pnx833x_wdt.c
+++ b/drivers/watchdog/pnx833x_wdt.c
@@ -141,7 +141,7 @@
 	int options, new_timeout = 0;
 	uint32_t timeout, timeout_left = 0;
 
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
 		.firmware_version = 0,
 		.identity = "Hardware Watchdog for PNX833x",
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
index bf12d06..d4c29b5 100644
--- a/drivers/watchdog/rc32434_wdt.c
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -198,7 +198,7 @@
 	void __user *argp = (void __user *)arg;
 	int new_timeout;
 	unsigned int value;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT |
 					WDIOF_KEEPALIVEPING |
 					WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
index 4976bfd..69c6adb 100644
--- a/drivers/watchdog/rdc321x_wdt.c
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -149,7 +149,7 @@
 {
 	void __user *argp = (void __user *)arg;
 	unsigned int value;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_CARDRESET,
 		.identity = "RDC321x WDT",
 	};
diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c
index c14ae86..ae57bf9 100644
--- a/drivers/watchdog/riowd.c
+++ b/drivers/watchdog/riowd.c
@@ -85,7 +85,7 @@
 
 static long riowd_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
-	static struct watchdog_info info = {
+	static const struct watchdog_info info = {
 		.options		= WDIOF_SETTIMEOUT,
 		.firmware_version	= 1,
 		.identity		= DRIVER_NAME,
diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c
index e6763d2..8d44c9b 100644
--- a/drivers/watchdog/sbc_fitpc2_wdt.c
+++ b/drivers/watchdog/sbc_fitpc2_wdt.c
@@ -111,7 +111,7 @@
 }
 
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
 				WDIOF_KEEPALIVEPING,
 	.identity	= WATCHDOG_NAME,
diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c
index 569eb29..9c40f48 100644
--- a/drivers/watchdog/sch311x_wdt.c
+++ b/drivers/watchdog/sch311x_wdt.c
@@ -250,7 +250,7 @@
 	int new_timeout;
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options		= WDIOF_KEEPALIVEPING |
 					  WDIOF_SETTIMEOUT |
 					  WDIOF_MAGICCLOSE,
diff --git a/drivers/watchdog/stmp3xxx_wdt.c b/drivers/watchdog/stmp3xxx_wdt.c
index 5dd9526..b3421fd 100644
--- a/drivers/watchdog/stmp3xxx_wdt.c
+++ b/drivers/watchdog/stmp3xxx_wdt.c
@@ -94,7 +94,7 @@
 	return len;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options	= WDIOF_CARDRESET |
 			  WDIOF_MAGICCLOSE |
 			  WDIOF_SETTIMEOUT |
diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c
new file mode 100644
index 0000000..565a2c3
--- /dev/null
+++ b/drivers/watchdog/ts72xx_wdt.c
@@ -0,0 +1,520 @@
+/*
+ * Watchdog driver for Technologic Systems TS-72xx based SBCs
+ * (TS-7200, TS-7250 and TS-7260). These boards have external
+ * glue logic CPLD chip, which includes programmable watchdog
+ * timer.
+ *
+ * Copyright (c) 2009 Mika Westerberg <mika.westerberg@iki.fi>
+ *
+ * This driver is based on ep93xx_wdt and wm831x_wdt drivers.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/miscdevice.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+
+#define TS72XX_WDT_FEED_VAL		0x05
+#define TS72XX_WDT_DEFAULT_TIMEOUT	8
+
+static int timeout = TS72XX_WDT_DEFAULT_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. "
+			  "(1 <= timeout <= 8, default="
+			  __MODULE_STRING(TS72XX_WDT_DEFAULT_TIMEOUT)
+			  ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
+
+/**
+ * struct ts72xx_wdt - watchdog control structure
+ * @lock: lock that protects this structure
+ * @regval: watchdog timeout value suitable for control register
+ * @flags: flags controlling watchdog device state
+ * @control_reg: watchdog control register
+ * @feed_reg: watchdog feed register
+ * @pdev: back pointer to platform dev
+ */
+struct ts72xx_wdt {
+	struct mutex	lock;
+	int		regval;
+
+#define TS72XX_WDT_BUSY_FLAG		1
+#define TS72XX_WDT_EXPECT_CLOSE_FLAG	2
+	int		flags;
+
+	void __iomem	*control_reg;
+	void __iomem	*feed_reg;
+
+	struct platform_device *pdev;
+};
+
+struct platform_device *ts72xx_wdt_pdev;
+
+/*
+ * TS-72xx Watchdog supports following timeouts (value written
+ * to control register):
+ *	value	description
+ *	-------------------------
+ * 	0x00	watchdog disabled
+ *	0x01	250ms
+ *	0x02	500ms
+ *	0x03	1s
+ *	0x04	reserved
+ *	0x05	2s
+ *	0x06	4s
+ *	0x07	8s
+ *
+ * Timeouts below 1s are not very usable so we don't
+ * allow them at all.
+ *
+ * We provide two functions that convert between these:
+ * timeout_to_regval() and regval_to_timeout().
+ */
+static const struct {
+	int	timeout;
+	int	regval;
+} ts72xx_wdt_map[] = {
+	{ 1, 3 },
+	{ 2, 5 },
+	{ 4, 6 },
+	{ 8, 7 },
+};
+
+/**
+ * timeout_to_regval() - converts given timeout to control register value
+ * @new_timeout: timeout in seconds to be converted
+ *
+ * Function converts given @new_timeout into valid value that can
+ * be programmed into watchdog control register. When conversion is
+ * not possible, function returns %-EINVAL.
+ */
+static int timeout_to_regval(int new_timeout)
+{
+	int i;
+
+	/* first limit it to 1 - 8 seconds */
+	new_timeout = clamp_val(new_timeout, 1, 8);
+
+	for (i = 0; i < ARRAY_SIZE(ts72xx_wdt_map); i++) {
+		if (ts72xx_wdt_map[i].timeout >= new_timeout)
+			return ts72xx_wdt_map[i].regval;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * regval_to_timeout() - converts control register value to timeout
+ * @regval: control register value to be converted
+ *
+ * Function converts given @regval to timeout in seconds (1, 2, 4 or 8).
+ * If @regval cannot be converted, function returns %-EINVAL.
+ */
+static int regval_to_timeout(int regval)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ts72xx_wdt_map); i++) {
+		if (ts72xx_wdt_map[i].regval == regval)
+			return ts72xx_wdt_map[i].timeout;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * ts72xx_wdt_kick() - kick the watchdog
+ * @wdt: watchdog to be kicked
+ *
+ * Called with @wdt->lock held.
+ */
+static inline void ts72xx_wdt_kick(struct ts72xx_wdt *wdt)
+{
+	__raw_writeb(TS72XX_WDT_FEED_VAL, wdt->feed_reg);
+}
+
+/**
+ * ts72xx_wdt_start() - starts the watchdog timer
+ * @wdt: watchdog to be started
+ *
+ * This function programs timeout to watchdog timer
+ * and starts it.
+ *
+ * Called with @wdt->lock held.
+ */
+static void ts72xx_wdt_start(struct ts72xx_wdt *wdt)
+{
+	/*
+	 * To program the wdt, it first must be "fed" and
+	 * only after that (within 30 usecs) the configuration
+	 * can be changed.
+	 */
+	ts72xx_wdt_kick(wdt);
+	__raw_writeb((u8)wdt->regval, wdt->control_reg);
+}
+
+/**
+ * ts72xx_wdt_stop() - stops the watchdog timer
+ * @wdt: watchdog to be stopped
+ *
+ * Called with @wdt->lock held.
+ */
+static void ts72xx_wdt_stop(struct ts72xx_wdt *wdt)
+{
+	ts72xx_wdt_kick(wdt);
+	__raw_writeb(0, wdt->control_reg);
+}
+
+static int ts72xx_wdt_open(struct inode *inode, struct file *file)
+{
+	struct ts72xx_wdt *wdt = platform_get_drvdata(ts72xx_wdt_pdev);
+	int regval;
+
+	/*
+	 * Try to convert default timeout to valid register
+	 * value first.
+	 */
+	regval = timeout_to_regval(timeout);
+	if (regval < 0) {
+		dev_err(&wdt->pdev->dev,
+			"failed to convert timeout (%d) to register value\n",
+			timeout);
+		return -EINVAL;
+	}
+
+	if (mutex_lock_interruptible(&wdt->lock))
+		return -ERESTARTSYS;
+
+	if ((wdt->flags & TS72XX_WDT_BUSY_FLAG) != 0) {
+		mutex_unlock(&wdt->lock);
+		return -EBUSY;
+	}
+
+	wdt->flags = TS72XX_WDT_BUSY_FLAG;
+	wdt->regval = regval;
+	file->private_data = wdt;
+
+	ts72xx_wdt_start(wdt);
+
+	mutex_unlock(&wdt->lock);
+	return nonseekable_open(inode, file);
+}
+
+static int ts72xx_wdt_release(struct inode *inode, struct file *file)
+{
+	struct ts72xx_wdt *wdt = file->private_data;
+
+	if (mutex_lock_interruptible(&wdt->lock))
+		return -ERESTARTSYS;
+
+	if ((wdt->flags & TS72XX_WDT_EXPECT_CLOSE_FLAG) != 0) {
+		ts72xx_wdt_stop(wdt);
+	} else {
+		dev_warn(&wdt->pdev->dev,
+			 "TS-72XX WDT device closed unexpectly. "
+			 "Watchdog timer will not stop!\n");
+		/*
+		 * Kick it one more time, to give userland some time
+		 * to recover (for example, respawning the kicker
+		 * daemon).
+		 */
+		ts72xx_wdt_kick(wdt);
+	}
+
+	wdt->flags = 0;
+
+	mutex_unlock(&wdt->lock);
+	return 0;
+}
+
+static ssize_t ts72xx_wdt_write(struct file *file,
+				const char __user *data,
+				size_t len,
+				loff_t *ppos)
+{
+	struct ts72xx_wdt *wdt = file->private_data;
+
+	if (!len)
+		return 0;
+
+	if (mutex_lock_interruptible(&wdt->lock))
+		return -ERESTARTSYS;
+
+	ts72xx_wdt_kick(wdt);
+
+	/*
+	 * Support for magic character closing. User process
+	 * writes 'V' into the device, just before it is closed.
+	 * This means that we know that the wdt timer can be
+	 * stopped after user closes the device.
+	 */
+	if (!nowayout) {
+		int i;
+
+		for (i = 0; i < len; i++) {
+			char c;
+
+			/* In case it was set long ago */
+			wdt->flags &= ~TS72XX_WDT_EXPECT_CLOSE_FLAG;
+
+			if (get_user(c, data + i)) {
+				mutex_unlock(&wdt->lock);
+				return -EFAULT;
+			}
+			if (c == 'V') {
+				wdt->flags |= TS72XX_WDT_EXPECT_CLOSE_FLAG;
+				break;
+			}
+		}
+	}
+
+	mutex_unlock(&wdt->lock);
+	return len;
+}
+
+static const struct watchdog_info winfo = {
+	.options		= WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+				  WDIOF_MAGICCLOSE,
+	.firmware_version	= 1,
+	.identity		= "TS-72XX WDT",
+};
+
+static long ts72xx_wdt_ioctl(struct file *file, unsigned int cmd,
+			     unsigned long arg)
+{
+	struct ts72xx_wdt *wdt = file->private_data;
+	void __user *argp = (void __user *)arg;
+	int __user *p = (int __user *)argp;
+	int error = 0;
+
+	if (mutex_lock_interruptible(&wdt->lock))
+		return -ERESTARTSYS;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		error = copy_to_user(argp, &winfo, sizeof(winfo));
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_KEEPALIVE:
+		ts72xx_wdt_kick(wdt);
+		break;
+
+	case WDIOC_SETOPTIONS: {
+		int options;
+
+		if (get_user(options, p)) {
+			error = -EFAULT;
+			break;
+		}
+
+		error = -EINVAL;
+
+		if ((options & WDIOS_DISABLECARD) != 0) {
+			ts72xx_wdt_stop(wdt);
+			error = 0;
+		}
+		if ((options & WDIOS_ENABLECARD) != 0) {
+			ts72xx_wdt_start(wdt);
+			error = 0;
+		}
+
+		break;
+	}
+
+	case WDIOC_SETTIMEOUT: {
+		int new_timeout;
+
+		if (get_user(new_timeout, p)) {
+			error = -EFAULT;
+		} else {
+			int regval;
+
+			regval = timeout_to_regval(new_timeout);
+			if (regval < 0) {
+				error = -EINVAL;
+			} else {
+				ts72xx_wdt_stop(wdt);
+				wdt->regval = regval;
+				ts72xx_wdt_start(wdt);
+			}
+		}
+		if (error)
+			break;
+
+		/*FALLTHROUGH*/
+	}
+
+	case WDIOC_GETTIMEOUT:
+		if (put_user(regval_to_timeout(wdt->regval), p))
+			error = -EFAULT;
+		break;
+
+	default:
+		error = -ENOTTY;
+		break;
+	}
+
+	mutex_unlock(&wdt->lock);
+	return error;
+}
+
+static const struct file_operations ts72xx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.open		= ts72xx_wdt_open,
+	.release	= ts72xx_wdt_release,
+	.write		= ts72xx_wdt_write,
+	.unlocked_ioctl	= ts72xx_wdt_ioctl,
+};
+
+static struct miscdevice ts72xx_wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &ts72xx_wdt_fops,
+};
+
+static __devinit int ts72xx_wdt_probe(struct platform_device *pdev)
+{
+	struct ts72xx_wdt *wdt;
+	struct resource *r1, *r2;
+	int error = 0;
+
+	wdt = kzalloc(sizeof(struct ts72xx_wdt), GFP_KERNEL);
+	if (!wdt) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	r1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r1) {
+		dev_err(&pdev->dev, "failed to get memory resource\n");
+		error = -ENODEV;
+		goto fail;
+	}
+
+	r1 = request_mem_region(r1->start, resource_size(r1), pdev->name);
+	if (!r1) {
+		dev_err(&pdev->dev, "cannot request memory region\n");
+		error = -EBUSY;
+		goto fail;
+	}
+
+	wdt->control_reg = ioremap(r1->start, resource_size(r1));
+	if (!wdt->control_reg) {
+		dev_err(&pdev->dev, "failed to map memory\n");
+		error = -ENODEV;
+		goto fail_free_control;
+	}
+
+	r2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!r2) {
+		dev_err(&pdev->dev, "failed to get memory resource\n");
+		error = -ENODEV;
+		goto fail_unmap_control;
+	}
+
+	r2 = request_mem_region(r2->start, resource_size(r2), pdev->name);
+	if (!r2) {
+		dev_err(&pdev->dev, "cannot request memory region\n");
+		error = -EBUSY;
+		goto fail_unmap_control;
+	}
+
+	wdt->feed_reg = ioremap(r2->start, resource_size(r2));
+	if (!wdt->feed_reg) {
+		dev_err(&pdev->dev, "failed to map memory\n");
+		error = -ENODEV;
+		goto fail_free_feed;
+	}
+
+	platform_set_drvdata(pdev, wdt);
+	ts72xx_wdt_pdev = pdev;
+	wdt->pdev = pdev;
+	mutex_init(&wdt->lock);
+
+	error = misc_register(&ts72xx_wdt_miscdev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register miscdev\n");
+		goto fail_unmap_feed;
+	}
+
+	dev_info(&pdev->dev, "TS-72xx Watchdog driver\n");
+
+	return 0;
+
+fail_unmap_feed:
+	platform_set_drvdata(pdev, NULL);
+	iounmap(wdt->feed_reg);
+fail_free_feed:
+	release_mem_region(r2->start, resource_size(r2));
+fail_unmap_control:
+	iounmap(wdt->control_reg);
+fail_free_control:
+	release_mem_region(r1->start, resource_size(r1));
+fail:
+	kfree(wdt);
+	return error;
+}
+
+static __devexit int ts72xx_wdt_remove(struct platform_device *pdev)
+{
+	struct ts72xx_wdt *wdt = platform_get_drvdata(pdev);
+	struct resource *res;
+	int error;
+
+	error = misc_deregister(&ts72xx_wdt_miscdev);
+	platform_set_drvdata(pdev, NULL);
+
+	iounmap(wdt->feed_reg);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	release_mem_region(res->start, resource_size(res));
+
+	iounmap(wdt->control_reg);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(wdt);
+	return error;
+}
+
+static struct platform_driver ts72xx_wdt_driver = {
+	.probe		= ts72xx_wdt_probe,
+	.remove		= __devexit_p(ts72xx_wdt_remove),
+	.driver		= {
+		.name	= "ts72xx-wdt",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static __init int ts72xx_wdt_init(void)
+{
+	return platform_driver_register(&ts72xx_wdt_driver);
+}
+module_init(ts72xx_wdt_init);
+
+static __exit void ts72xx_wdt_exit(void)
+{
+	platform_driver_unregister(&ts72xx_wdt_driver);
+}
+module_exit(ts72xx_wdt_exit);
+
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>");
+MODULE_DESCRIPTION("TS-72xx SBC Watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ts72xx-wdt");
diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c
index d635566..9e9ed7b 100644
--- a/drivers/watchdog/txx9wdt.c
+++ b/drivers/watchdog/txx9wdt.c
@@ -13,7 +13,6 @@
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
 #include <linux/fs.h>
-#include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/uaccess.h>
 #include <linux/platform_device.h>
@@ -166,14 +165,6 @@
 	}
 }
 
-static int txx9wdt_notify_sys(struct notifier_block *this, unsigned long code,
-	void *unused)
-{
-	if (code == SYS_DOWN || code == SYS_HALT)
-		txx9wdt_stop();
-	return NOTIFY_DONE;
-}
-
 static const struct file_operations txx9wdt_fops = {
 	.owner		=	THIS_MODULE,
 	.llseek		=	no_llseek,
@@ -189,10 +180,6 @@
 	.fops	=	&txx9wdt_fops,
 };
 
-static struct notifier_block txx9wdt_notifier = {
-	.notifier_call = txx9wdt_notify_sys,
-};
-
 static int __init txx9wdt_probe(struct platform_device *dev)
 {
 	struct resource *res;
@@ -221,13 +208,8 @@
 	if (!txx9wdt_reg)
 		goto exit_busy;
 
-	ret = register_reboot_notifier(&txx9wdt_notifier);
-	if (ret)
-		goto exit;
-
 	ret = misc_register(&txx9wdt_miscdev);
 	if (ret) {
-		unregister_reboot_notifier(&txx9wdt_notifier);
 		goto exit;
 	}
 
@@ -249,14 +231,19 @@
 static int __exit txx9wdt_remove(struct platform_device *dev)
 {
 	misc_deregister(&txx9wdt_miscdev);
-	unregister_reboot_notifier(&txx9wdt_notifier);
 	clk_disable(txx9_imclk);
 	clk_put(txx9_imclk);
 	return 0;
 }
 
+static void txx9wdt_shutdown(struct platform_device *dev)
+{
+	txx9wdt_stop();
+}
+
 static struct platform_driver txx9wdt_driver = {
 	.remove = __exit_p(txx9wdt_remove),
+	.shutdown = txx9wdt_shutdown,
 	.driver = {
 		.name = "txx9wdt",
 		.owner = THIS_MODULE,
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index f201acc..0f5288d 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -201,7 +201,7 @@
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	int new_timeout;
-	static struct watchdog_info ident = {
+	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
 							WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c
index 0560182..6e6743d 100644
--- a/drivers/watchdog/w83977f_wdt.c
+++ b/drivers/watchdog/w83977f_wdt.c
@@ -371,7 +371,7 @@
  *      according to their available features.
  */
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
 	.firmware_version =	1,
 	.identity = WATCHDOG_NAME,
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index 5bfb1f2..94ec22b 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -312,7 +312,7 @@
 {
 	int __user *argp = (void __user *)arg;
 	int i;
-	static struct watchdog_info wdinfo = {
+	static const struct watchdog_info wdinfo = {
 		.options = WDRTAS_SUPPORTED_MASK,
 		.firmware_version = 0,
 		.identity = "wdrtas",
diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
index 3bbefe9..bfda2e9 100644
--- a/drivers/watchdog/wdt.c
+++ b/drivers/watchdog/wdt.c
@@ -358,7 +358,7 @@
 	int new_heartbeat;
 	int status;
 
-	static struct watchdog_info ident = {
+	struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT|
 					WDIOF_MAGICCLOSE|
 					WDIOF_KEEPALIVEPING,
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index f368dd8..7b22e3c 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -412,7 +412,7 @@
 	int new_heartbeat;
 	int status;
 
-	static struct watchdog_info ident = {
+	struct watchdog_info ident = {
 		.options =		WDIOF_SETTIMEOUT|
 					WDIOF_MAGICCLOSE|
 					WDIOF_KEEPALIVEPING,
diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
index 775bcd8..8c4b2d5 100644
--- a/drivers/watchdog/wm831x_wdt.c
+++ b/drivers/watchdog/wm831x_wdt.c
@@ -213,7 +213,7 @@
 	return count;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 	.identity = "WM831x Watchdog",
 };
diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c
index a2d2e8e..89dd7b0 100644
--- a/drivers/watchdog/wm8350_wdt.c
+++ b/drivers/watchdog/wm8350_wdt.c
@@ -177,7 +177,7 @@
 	return count;
 }
 
-static struct watchdog_info ident = {
+static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 	.identity = "WM8350 Watchdog",
 };
diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c
index ae5cb05..bb71ab2 100644
--- a/drivers/xen/sys-hypervisor.c
+++ b/drivers/xen/sys-hypervisor.c
@@ -426,7 +426,7 @@
 	return 0;
 }
 
-static struct sysfs_ops hyp_sysfs_ops = {
+static const struct sysfs_ops hyp_sysfs_ops = {
 	.show = hyp_sysfs_show,
 	.store = hyp_sysfs_store,
 };
diff --git a/drivers/zorro/zorro.ids b/drivers/zorro/zorro.ids
index 0c0f99e..de24e3d 100644
--- a/drivers/zorro/zorro.ids
+++ b/drivers/zorro/zorro.ids
@@ -108,7 +108,7 @@
 	0c00  500XP/SupraDrive WordSync [SCSI Host Adapter]
 	0d00  SupraDrive WordSync II [SCSI Host Adapter]
 	1000  2400zi+ [Modem]
-0422  Computer Systems Assosiates
+0422  Computer Systems Associates
 	1100  Magnum 40 [Accelerator and SCSI Host Adapter]
 	1500  12 Gauge [SCSI Host Adapter]
 0439  Marc Michael Groth
diff --git a/firmware/bnx2x-e1-5.2.7.0.fw.ihex b/firmware/bnx2x-e1-5.2.7.0.fw.ihex
deleted file mode 100644
index a99c41c..0000000
--- a/firmware/bnx2x-e1-5.2.7.0.fw.ihex
+++ /dev/null
@@ -1,10178 +0,0 @@
-:10000000000028B0000000600000068800002918E9
-:100010000000161400002FA800000098000045C042
-:10002000000073C400004660000000CC0000BA2845
-:10003000000099A00000BAF800000094000154A04C
-:10004000000057BC00015538000000B80001ACF8B2
-:100050000000CE2C0001ADB80000000400027BE8D7
-:10006000020400480000000F020400540000004594
-:1000700002040058000000840204005C0000000636
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000060400CC0000000418
-:10010000020400DC00100000020400E012140000F1
-:10011000020400E422140000020400E8321400008B
-:10012000060400EC000000040104012400000000AB
-:1001300001040128000000000104012C000000005F
-:10014000010401300000000002040004000000FF70
-:1001500002040008000000FF0204000C000000FF81
-:1001600002040010000000FF02040014000000FF61
-:1001700002040018000000FF0204001C000000FF41
-:1001800002040020000000FF020400240000003EE2
-:1001900002040028000000000204002C0000003FC0
-:1001A000020400300000003F020400340000003F61
-:1001B00002040038000000000204003C0000003F80
-:1001C000020400400000003F020400440000003F21
-:1001D00002042008000004110204200C00000400A6
-:1001E000020420100000040402042014000004197A
-:1001F0000204201C0000FFFF020420200000FFFF7B
-:10020000020420240000FFFF020420280000FFFF5A
-:1002100006042038000000020204204000000034E0
-:100220000204204400000035060420480000007C41
-:100230000204223807FFFFFF0204223C0000003FB7
-:100240000204224007FFFFFF020422440000000FC7
-:1002500001042248000000000104224C00000000BC
-:10026000010422500000000001042254000000009C
-:1002700001042258000000000104225C000000007C
-:10028000010422600000000001042264000000005C
-:1002900001042268000000000104226C000000003C
-:1002A000010422700000000001042274000000001C
-:1002B00001042278000000000104227C00000000FC
-:1002C000020424BC000000010C042000000003E82C
-:1002D0000A042000000000010B0420000000000AB6
-:1002E0000205004400000020020500480000003222
-:1002F000020500900215002002050094021500205E
-:1003000002050098000000300205009C0810000063
-:10031000020500A000000033020500A40000003028
-:10032000020500A800000031020500AC0000000238
-:10033000020500B000000005020500B40000000640
-:10034000020500B800000002020500BC0000000227
-:10035000020500C000000000020500C40000000506
-:10036000020500C800000002020500CC00000002E7
-:10037000020500D000000002020500D400000001C8
-:1003800002050114000000010205011C000000012B
-:100390000205012000000002020502040000000125
-:1003A0000205020C0000004002050210000000409F
-:1003B0000205021C000000200205022000000013BC
-:1003C0000205022400000020060502400000000A89
-:1003D0000405028000200000020500500000000714
-:1003E0000205005400000007020500580000000844
-:1003F0000205005C00000008060500600000000423
-:10040000020500D800000006020500E00000000D13
-:10041000020500E40000002D020500E800000007CE
-:10042000020500EC00000027020500F000000007B4
-:10043000020500F400000027020500F80000000794
-:10044000020500FC00000027020500040000000176
-:1004500002050008000000010205000C0000000178
-:100460000205001000000001020500140000000158
-:1004700002050018000000010205001C0000000138
-:100480000205002000000001020500240000000118
-:1004900002050028000000010205002C00000001F8
-:1004A00002050030000000010205003400000001D8
-:1004B00002050038000000010205003C00000001B8
-:1004C00002050040000000010406100002000020A8
-:1004D000020600DC00000001010600D80000000058
-:1004E0000406020000030220020600DC00000000F7
-:1004F00002060068000000B802060078000001143F
-:10050000010600B800000000010600C8000000005D
-:100510000206006C000000B80206007C0000011416
-:10052000010600BC00000000010600CC0000000035
-:100530000718040000960000081807600014022342
-:10054000071C000034C50000071C800034DB0D329E
-:10055000071D00000A1D1A69081D14405D78022558
-:100560000118000000000000011800040000000055
-:1005700001180008000000000118000C0000000035
-:100580000118001000000000011800140000000015
-:1005900002180020000000010218002400000002E0
-:1005A00002180028000000030218002C00000000C0
-:1005B000021800300000000402180034000000019E
-:1005C00002180038000000000218003C0000000182
-:1005D000021800400000000402180044000000005F
-:1005E00002180048000000010218004C000000033F
-:1005F0000218005000000000021800540000000122
-:1006000002180058000000040218005C00000000FE
-:1006100002180060000000010218006400000003DE
-:1006200002180068000000000218006C00000001C1
-:10063000021800700000000402180074000000009E
-:1006400002180078000000040218007C000000037B
-:100650000618008000000002021800A400003FFFFE
-:10066000021800A8000003FF021802240000000086
-:1006700002180234000000000218024C00000000C2
-:10068000021802E4000000FF061810000000040039
-:10069000021B8BC000000001021B80000000003420
-:1006A000021B804000000018021B80800000000C2C
-:1006B000021B80C0000000200C1B83000007A1204B
-:1006C0000A1B8300000001380B1B83000000138805
-:1006D000021B83C0000001F4061A2000000000B2D3
-:1006E000061A23C800000181041A29CC0001022740
-:1006F000061A1020000000C8061A100000000002B0
-:10070000061A1E3800000002061A1E300000000201
-:10071000061A080000000002061A0808000000027D
-:10072000061A081000000004041A1FB00005022871
-:10073000041A4CB00008022D061A22C8000000203E
-:10074000061A400000000124021A4920000000009F
-:10075000061A14000000000A061A145000000006D1
-:10076000061A150000000002041A150800050235DB
-:10077000061A151C00000009061A15800000001456
-:10078000061A09C000000048061A0800000000020E
-:10079000061A08200000000E041A1FB00002023AD8
-:1007A000061A2C2800000002061A23480000002028
-:1007B000061A449000000124021A49240000000097
-:1007C000061A14280000000A061A14680000000621
-:1007D000061A154000000002041A15480005023CE4
-:1007E000061A155C00000009061A15D00000001456
-:1007F000061A0AE000000048061A08080000000275
-:10080000061A08580000000E041A1FB80002024120
-:10081000061A2C30000000020200A2800000000135
-:100820000200A294071D29110200A29800000000F6
-:100830000200A29C009C04240200A2A00000000070
-:100840000200A2A4000002090200A4FCFF000000B4
-:10085000020100B400000001020100B80000000124
-:10086000020100DC000000010201010000000001A3
-:1008700002010104000000010201007C00300000C0
-:1008800002010084000000280201008C000000002A
-:1008900002010130000000040201025C00000001BE
-:1008A000020103280000000002010554000000308E
-:1008B000020100C400000001020100CC00000001A0
-:1008C000020100F800000001020100F00000000138
-:1008D00002010080003000000201008800000028B2
-:1008E0000201009000000000020101340000000439
-:1008F000020102DC000000010201032C00000000E4
-:100900000201056400000030020100C8000000017F
-:10091000020100D000000001020100FC0000000103
-:10092000020100F400000001020C10000000002091
-:10093000020C200800000A11020C200C00000A0022
-:10094000020C201000000A04020C201C0000FFFF13
-:10095000020C20200000FFFF020C20240000FFFFFB
-:10096000020C20280000FFFF060C203800000002C7
-:10097000020C204000000034020C2044000000352E
-:10098000020C204800000020020C204C0000002136
-:10099000020C205000000022020C20540000002312
-:1009A000020C205800000024020C205C00000025EE
-:1009B000020C206000000026020C206400000027CA
-:1009C000020C206800000028020C206C00000029A6
-:1009D000020C20700000002A020C20740000002B82
-:1009E000060C207800000056020C21D00000000107
-:1009F000020C21D400000001020C21D800000001EB
-:100A0000020C21DC00000001020C21E000000001CA
-:100A1000020C21E400000001020C21E800000001AA
-:100A2000020C21EC00000001020C21F0000000018A
-:100A3000020C21F400000001060C21F80000001057
-:100A4000020C223807FFFFFF020C223C0000003F8F
-:100A5000020C224007FFFFFF020C22440000000F9F
-:100A6000010C224800000000010C224C0000000094
-:100A7000010C225000000000010C22540000000074
-:100A8000010C225800000000010C225C0000000054
-:100A9000010C226000000000010C22640000000034
-:100AA000010C226800000000010C226C0000000014
-:100AB000010C227000000000010C227400000000F4
-:100AC000010C227800000000010C227C00000000D4
-:100AD000020C24BC000000010C0C2000000003E804
-:100AE0000A0C2000000000010B0C20000000000A8E
-:100AF000020C400800000365020C400C0000035487
-:100B0000020C401000000358020C40140000037552
-:100B1000020C401C0000FFFF020C40200000FFFF01
-:100B2000020C40240000FFFF020C40280000FFFFE1
-:100B3000020C403800000046020C403C000000055A
-:100B4000060C40400000005E020C41B800000001AD
-:100B5000060C41BC0000001F020C423807FFFFFFDB
-:100B6000020C423C0000003F020C424007FFFFFF26
-:100B7000020C42440000000F010C4248000000003B
-:100B8000010C424C00000000010C4250000000002B
-:100B9000010C425400000000010C4258000000000B
-:100BA000010C425C00000000010C426000000000EB
-:100BB000010C426400000000010C426800000000CB
-:100BC000010C426C00000000010C427000000000AB
-:100BD000010C427400000000010C4278000000008B
-:100BE000010C427C00000000010C4280000000006B
-:100BF000020C44C0000000010C0C4000000003E89F
-:100C00000A0C4000000000010B0C40000000000A2C
-:100C1000020D004400000032020D008C021500207D
-:100C2000020D009002150020020D00940810000033
-:100C3000020D009800000033020D009C000000022D
-:100C4000020D00A000000000020D00A4000000053D
-:100C5000020D00A800000005060D00AC0000000217
-:100C6000020D00B400000002020D00B800000003F5
-:100C7000020D00BC00000002020D00C000000001D7
-:100C8000020D00C800000002020D00CC00000002AE
-:100C9000020D010800000001020D015C00000001CE
-:100CA000020D016400000001020D01680000000255
-:100CB000020D020400000001020D020C00000020E1
-:100CC000020D021000000040020D0214000000405E
-:100CD000020D022000000003020D02240000001893
-:100CE000060D028000000012040D030000240243E0
-:100CF000020D004C00000001020D00500000000237
-:100D0000020D005400000008020D00580000000809
-:100D1000060D005C00000004020D00C40000000489
-:100D2000020D011400000009020D01180000002945
-:100D3000020D011C0000000A020D01200000002A23
-:100D4000020D012400000007020D01280000002709
-:100D5000020D012C00000007020D013000000027E9
-:100D6000020D01340000000C020D01380000002CBF
-:100D7000020D013C0000000C020D01400000002C9F
-:100D8000020D01440000000C020D01480000002C7F
-:100D9000020D000400000001020D00080000000127
-:100DA000020D000C00000001020D00100000000107
-:100DB000020D001400000001020D001800000001E7
-:100DC000020D001C00000001020D002000000001C7
-:100DD000020D002400000001020D002800000001A7
-:100DE000020D002C00000001020D00300000000187
-:100DF000020D003400000001020D00380000000167
-:100E0000020D003C00000001020E004C0000003208
-:100E1000020E009402150020020E00980215002018
-:100E2000020E009C00000030020E00A0081000001E
-:100E3000020E00A400000033020E00A800000030E3
-:100E4000020E00AC00000031020E00B000000002F3
-:100E5000020E00B400000004020E00B80000000002
-:100E6000020E00BC00000002020E00C000000002E2
-:100E7000020E00C400000000020E00C800000002C4
-:100E8000020E00CC00000007020E00D0000000029D
-:100E9000020E00D400000002020E00D80000000183
-:100EA000020E00E400000001020E014400000001F7
-:100EB000020E014C00000001020E01500000000271
-:100EC000020E020400000001020E020C00000040AD
-:100ED000020E021000000040020E021C000000047E
-:100EE000020E022000000020020E02240000000E6C
-:100EF000020E02280000001B060E03000000001274
-:100F0000040E0280001B0267020E00540000000C59
-:100F1000020E005800000009020E005C0000000FE5
-:100F2000020E006000000010060E006400000004C5
-:100F3000020E00DC00000003020E01100000000F92
-:100F4000020E01140000002F020E01180000000E16
-:100F5000020E011C0000002E020E00040000000121
-:100F6000020E000800000001020E000C000000014B
-:100F7000020E001000000001020E0014000000012B
-:100F8000020E001800000001020E001C000000010B
-:100F9000020E002000000001020E002400000001EB
-:100FA000020E002800000001020E002C00000001CB
-:100FB000020E003000000001020E003400000001AB
-:100FC000020E003800000001020E003C000000018B
-:100FD000020E004000000001020E0044000000016B
-:100FE0000730040000CA00000830076800130282BE
-:100FF00007340000336100000734800037270CD924
-:10100000073500002F111AA30835708051F00284B3
-:10101000013000000000000001300004000000006A
-:1010200001300008000000000130000C000000004A
-:10103000013000100000000001300014000000002A
-:1010400002300020000000010230002400000002F5
-:1010500002300028000000030230002C00000000D5
-:1010600002300030000000040230003400000001B3
-:1010700002300038000000000230003C0000000197
-:101080000230004000000004023000440000000074
-:1010900002300048000000010230004C0000000354
-:1010A0000230005000000000023000540000000137
-:1010B00002300058000000040230005C0000000014
-:1010C00002300060000000010230006400000003F4
-:1010D00002300068000000000230006C00000001D7
-:1010E00002300070000000040230007400000000B4
-:1010F00002300078000000040230007C0000000391
-:101100000630008000000002023000A400003FFF13
-:10111000023000A8000003FF02300224000000009B
-:1011200002300234000000000230024C00000000D7
-:10113000023002E40000FFFF06302000000008003B
-:1011400002338BC000000001023380000000001A4F
-:10115000023380400000004E023380800000001007
-:10116000023380C0000000200C3383000007A12060
-:101170000A338300000001380B338300000013881A
-:10118000023383C0000001F40C3383801DCD650061
-:101190000A3383800004C4B40B338380004C4B407B
-:1011A00006321AA0000000C206321020000000C85B
-:1011B0000632100000000002063214000000004059
-:1011C00006325098000000040632508000000005EE
-:1011D00004325094000102860632500000000020C4
-:1011E00004322830000202870233080001000000A8
-:1011F00004330C00001002890233080000000000D4
-:1012000004330C400010029906321500000000B4AF
-:1012100002321DC80000000006324000000000D865
-:10122000063217D0000000B402321DCC00000000CE
-:1012300006324360000000D807200400009200003E
-:1012400008200780001002A9072400002CD100000C
-:10125000072480002AE50B350824DC6062DA02AB43
-:101260000120000000000000012000040000000038
-:1012700001200008000000000120000C0000000018
-:1012800001200010000000000120001400000000F8
-:1012900002200020000000010220002400000002C3
-:1012A00002200028000000030220002C00000000A3
-:1012B0000220003000000004022000340000000181
-:1012C00002200038000000000220003C0000000165
-:1012D0000220004000000004022000440000000042
-:1012E00002200048000000010220004C0000000322
-:1012F0000220005000000000022000540000000105
-:1013000002200058000000040220005C00000000E1
-:1013100002200060000000010220006400000003C1
-:1013200002200068000000000220006C00000001A4
-:101330000220007000000004022000740000000081
-:1013400002200078000000040220007C000000035E
-:101350000620008000000002022000A400003FFFE1
-:10136000022000A8000003FF022002240000000069
-:1013700002200234000000000220024C00000000A5
-:10138000022002E40000FFFF062020000000080009
-:1013900002238BC000000001022380000000001027
-:1013A00002238040000000120223808000000030F1
-:1013B000022380C00000000E022383C0000001F45D
-:1013C000062250000000004206221020000000C843
-:1013D000062210000000000206222000000000C0CB
-:1013E000062225C00000024004222EC8000802ADDB
-:1013F00002230800013FFFFF04230C00001002B588
-:10140000022308000000000004230C40001002C565
-:1014100006223040000000A00622354000000010E7
-:10142000062236C000000030062240000000020004
-:10143000062235C00000002006223840000000309F
-:1014400006223000000000080222511800000000AF
-:10145000062223000000000E0622241000000030A7
-:10146000062232C0000000A00622358000000010D5
-:1014700006223780000000300622480000000200EB
-:10148000062236400000002006223900000000300D
-:1014900006223020000000080222511C000000003B
-:1014A000062223380000000E062224D0000000305F
-:1014B00002161000000000280217000800000002B9
-:1014C0000217002C000000030217003C000000047B
-:1014D0000217004400000008021700480000000244
-:1014E0000217004C0000009002170050000000900E
-:1014F00002170054008000900217005808140000E2
-:10150000021700600000008A0217006400000080DB
-:1015100002170068000000810217006C00000080C4
-:10152000021700700000000602170078000007D0C4
-:101530000217007C0000076C02170038007C1004C2
-:10154000021700040000000F0616402400000002ED
-:10155000021640700000001C021642080000000144
-:101560000216421000000001021642200000000195
-:10157000021642280000000102164230000000015D
-:10158000021642380000000102164260000000010D
-:101590000C16401C0003D0900A16401C0000009C52
-:1015A0000B16401C000009C4021640300000000861
-:1015B000021640340000000C0216403800000010F3
-:1015C0000216404400000020021640000000000106
-:1015D000021640D800000001021640080000000179
-:1015E0000216400C0000000102164010000000012D
-:1015F00002164240000000000216424800000000AF
-:101600000616427000000002021642500000000060
-:101610000216425800000000061642800000000238
-:1016200002166008000006140216600C0000060096
-:1016300002166010000006040216601C0000FFFF86
-:10164000021660200000FFFF021660240000FFFF6A
-:10165000021660280000FFFF02166038000000201C
-:101660000216603C000000200216604000000034BA
-:101670000216604400000035021660480000002396
-:101680000216604C00000024021660500000002585
-:101690000216605400000026021660580000002761
-:1016A0000216605C00000029021660600000002A3B
-:1016B000021660640000002B021660680000002C17
-:1016C0000216606C0000002D0616607000000052CB
-:1016D000021661B800000001061661BC0000001F80
-:1016E0000216623807FFFFFF0216623C0000003F4F
-:1016F0000216624007FFFFFF021662440000000F5F
-:1017000001166248000000000116624C0000000053
-:101710000116625000000000011662540000000033
-:1017200001166258000000000116625C0000000013
-:1017300001166260000000000116626400000000F3
-:1017400001166268000000000116626C00000000D3
-:1017500001166270000000000116627400000000B3
-:1017600001166278000000000116627C0000000093
-:10177000021664BC000000010C166000000003E8C3
-:101780000A166000000000010B1660000000000A4D
-:10179000021680400000000602168044000000058A
-:1017A000021680480000000A0216804C0000000566
-:1017B0000216805400000002021680CC00000004D3
-:1017C000021680D000000004021680D4000000043D
-:1017D000021680D800000004021680DC000000041D
-:1017E000021680E000000004021680E400000004FD
-:1017F000021680E8000000040216880400000004BD
-:10180000021680300000007C021680340000003D8B
-:10181000021680380000003F0216803C0000009C49
-:10182000021680F000000007061680F40000000594
-:101830000216880C01010101021681080000000057
-:101840000216810C00000004021681100000000442
-:1018500002168114000000020216881008012004FC
-:1018600002168118000000050216811C0000000508
-:1018700002168120000000050216812400000005E8
-:101880000216882C2008100102168128000000088A
-:101890000216812C000000060216813000000007AD
-:1018A0000216813400000000021688300101012078
-:1018B0000616813800000004021688340101010177
-:1018C0000616814800000004021688380101010153
-:1018D00006168158000000040216883C010101012F
-:1018E00006168168000000030216817400000001E2
-:1018F00002168840010101010216817800000001F2
-:101900000216817C000000010216818000000001A7
-:1019100002168184000000010216884401010101C1
-:1019200002168188000000010216818C000000046C
-:10193000021681900000000402168194000000024B
-:10194000021688480801200402168198000000054C
-:101950000216819C00000005021681A0000000050F
-:10196000021681A400000005021688142008100148
-:10197000021681A800000008021681AC00000006D3
-:10198000021681B000000007021681B400000001B9
-:101990000216881801010120021681B8000000011A
-:1019A000021681BC00000001021681C00000000187
-:1019B000021681C4000000010216881C0101010109
-:1019C000021681C800000001021681CC000000014F
-:1019D000021681D000000001021681D4000000012F
-:1019E0000216882001010101021681D800000001C1
-:1019F000021681DC00000001021681E000000001F7
-:101A0000021681E400000001021688240101010190
-:101A1000021681E800000001021681EC00000001BE
-:101A2000021681F000000001021688280101010160
-:101A300002168240FFFF003F0616824400000002AB
-:101A40000216824CFFFF003F021682500000010088
-:101A5000021682540000010006168258000000029F
-:101A600002168260000000C002168264000000C0FE
-:101A70000216826800001E000216826C00001E0022
-:101A800002168270000040000216827400004000BE
-:101A900002168278000080000216827C000080001E
-:101AA00002168280000020000216828400002000BE
-:101AB0000616828800000007021682A400000001BA
-:101AC000061682A80000000A021681F400000C0825
-:101AD000021681F800000040021681FC000001009F
-:101AE0000216820000000020021682040000001787
-:101AF00002168208000000800216820C000002001C
-:101B0000021682100000000002168218FFFF01FF7B
-:101B100002168214FFFF01FF0216823C0000001330
-:101B2000021680900000013F021680600000014014
-:101B30000216806400000140061680680000000262
-:101B400002168070000000C00616807400000007B6
-:101B50000216809C00000048021680A00000004889
-:101B6000061680A400000002021680AC00000048A7
-:101B7000061680B0000000070216823800008000C0
-:101B800002168234000025E40216809400007FFFD4
-:101B900002168220000000070216821C00000007C7
-:101BA000021682280000000002168224FFFFFFFFB9
-:101BB00002168230000000000216822CFFFFFFFF99
-:101BC000021680EC000000FF02140000000000017B
-:101BD0000214000C0000000102140040000000018B
-:101BE0000214004400007FFF0214000C00000000FB
-:101BF00002140000000000000214006C000000004D
-:101C00000214000400000001021400300000000172
-:101C100002140004000000000214005C0000000038
-:101C2000021400080000000102140034000000014A
-:101C30000214000800000000021400600000000010
-:101C40000202005800000032020200A0031500202A
-:101C5000020200A403150020020200A801000030C7
-:101C6000020200AC08100000020200B000000033C5
-:101C7000020200B400000030020200B8000000318F
-:101C8000020200BC00000003020200C000000006C7
-:101C9000020200C400000003020200C800000003AA
-:101CA000020200CC00000002020200D0000000008E
-:101CB000020200D400000002020200DC000000006A
-:101CC000020200E000000006020200E4000000043E
-:101CD000020200E800000002020200EC0000000224
-:101CE000020200F000000001020200FC00000006F9
-:101CF0000202012000000000020201340000000284
-:101D0000020201B0000000010202020C000000010A
-:101D10000202021400000001020202180000000288
-:101D200002020404000000010202040C0000004052
-:101D300002020410000000400202041C0000000423
-:101D4000020204200000002002020424000000021D
-:101D5000020204280000001F060205000000001215
-:101D600004020480001F02D5020200600000000F80
-:101D70000202006400000007020200680000000B7D
-:101D80000202006C0000000E060200700000000459
-:101D9000020200F40000000402020004000000013E
-:101DA00002020008000000010202000C0000000115
-:101DB00002020010000000010202001400000001F5
-:101DC00002020018000000010202001C00000001D5
-:101DD00002020020000000010202002400000001B5
-:101DE00002020028000000010202002C0000000195
-:101DF0000202003000000001020200340000000175
-:101E000002020038000000010202003C0000000154
-:101E10000202004000000001020200440000000134
-:101E200002020048000000010202004C0000000114
-:101E3000020200500000000102020108000000C878
-:101E40000202011800000002020201C400000000AA
-:101E5000020201CC00000000020201D400000002D6
-:101E6000020201DC00000002020201E4000000FFA7
-:101E7000020201EC000000FF0202010C000000C899
-:101E80000202011C00000002020201C80000000062
-:101E9000020201D000000000020201D8000000028E
-:101EA000020201E000000002020201E8000000FF5F
-:101EB000020201F0000000FF0728040000B5000046
-:101EC00008280768001302F4072C000035D300002F
-:101ED000072C80003A3E0D75072D00003B541C0571
-:101EE000072D800022BC2ADB082DC770471202F69E
-:101EF000012800000000000001280004000000008C
-:101F000001280008000000000128000C000000006B
-:101F1000012800100000000001280014000000004B
-:101F20000228002000000001022800240000000216
-:101F300002280028000000030228002C00000000F6
-:101F400002280030000000040228003400000001D4
-:101F500002280038000000000228003C00000001B8
-:101F60000228004000000004022800440000000095
-:101F700002280048000000010228004C0000000375
-:101F80000228005000000000022800540000000158
-:101F900002280058000000040228005C0000000035
-:101FA0000228006000000001022800640000000315
-:101FB00002280068000000000228006C00000001F8
-:101FC00002280070000000040228007400000000D5
-:101FD00002280078000000040228007C00000003B2
-:101FE0000628008000000002022800A400003FFF35
-:101FF000022800A8000003FF0228022400000000BD
-:1020000002280234000000000228024C00000000F8
-:10201000022802E40000FFFF06282000000008005C
-:10202000022B8BC000000001022B8000000000008A
-:10203000022B804000000018022B80800000000C62
-:10204000022B80C0000000660C2B83000007A1203B
-:102050000A2B8300000001380B2B8300000013883B
-:10206000022B83C0000001F40C2B8340000001F41C
-:102070000A2B8340000000000B2B8340000000056A
-:102080000A2B83800004C4B40C2B83801DCD650013
-:102090000B2B8380004C4B40062A3C400000000480
-:1020A000042A3C50000202F8062A300000000048D2
-:1020B000062A1020000000C8062A100000000002B6
-:1020C000062A31280000008E022A33680000000032
-:1020D000042A3370000202FA042A3A70000402FC57
-:1020E000042A3D0000020300042A15000002030236
-:1020F000062A150800000100022A197000000000DD
-:10210000022A197800000000042A19600002030462
-:10211000062A4AC000000002062A4B000000000404
-:10212000042A1F4800020306022B080000000000DA
-:10213000042B0C0000100308022B08000100000013
-:10214000042B0C4000080318022B080002000000BA
-:10215000042B0C6000080320062A3A8000000014BB
-:10216000062A3B2000000024062A14000000000A72
-:10217000062A145000000006062A3378000000D812
-:10218000022A3A3800000000042A3C5800020328C2
-:10219000042A3C680010032A062A5020000000028E
-:1021A000062A503000000002062A500000000002FB
-:1021B000062A501000000002022A504000000000D1
-:1021C000062A50480000000E022A50B80000000104
-:1021D000042A4AC80002033A062A4B1000000042B3
-:1021E000062A4D2000000004062A3AD00000001400
-:1021F000062A3BB000000024062A14280000000A2A
-:10220000062A146800000006062A36D8000000D806
-:10221000022A3A3C00000000042A3C600002033C11
-:10222000042A3CA80010033E062A502800000002A1
-:10223000062A503800000002062A5008000000025A
-:10224000062A501800000002022A50440000000034
-:10225000062A50800000000E022A50BC0000000137
-:10226000042A4AD00002034E062A4C1800000042FD
-:10227000062A4D3000000004021010080000000182
-:102280000210101000000264021010000003D000C1
-:10229000021010040000003D091018000200035055
-:1022A00009101100002005500610118000000002E6
-:1022B0000910118800060570061011A00000001812
-:1022C000021010100000000006102400000000E0C2
-:1022D0000210201C0000000002102020000000015D
-:1022E000021020C0000000010210200400000001C4
-:1022F000021020080000000109103C0000050576CE
-:1023000009103C200005057B0910380000050580F8
-:1023100002104028000000100210404400003FFF5F
-:102320000210405800280000021040840084924AA5
-:1023300002104058000000000610806800000004F1
-:1023400002108000000010800610802800000002AB
-:102350000210803800000010021080400000FFFFD3
-:10236000021080440000FFFF0210805000000000B7
-:102370000210810000000000061081200000000211
-:1023800002108008000002B502108010000000005A
-:10239000061082000000004A021081080001FFFFC1
-:1023A00006108140000000020210800000001A8028
-:1023B0000610900000000024061091200000004A42
-:1023C000061093700000004A061095C00000004AF5
-:1023D000021080040000108006108030000000020F
-:1023E0000210803C00000010021080480000FFFF37
-:1023F0000210804C0000FFFF02108054000000001B
-:102400000210810400000000061081280000000274
-:102410000210800C000002B50210801400000000C1
-:10242000061084000000004A0210810C0001FFFF2A
-:1024300006108148000000020210800400001A808B
-:102440000610909000000024061092480000004AF8
-:10245000061094980000004A061096E80000004A12
-:102460000212049000E383400212051400003C10A5
-:10247000021205200000000202120494FFFFFFFF79
-:1024800002120498FFFFFFFF0212049CFFFFFFFFF0
-:10249000021204A0FFFFFFFF021204A4FFFFFFFFD0
-:1024A000021204A8FFFFFFFF021204ACFFFFFFFFB0
-:1024B000021204B0FFFFFFFF021204B8FFFFFFFF8C
-:1024C000021204BCFFFFFFFF021204C0FFFFFFFF68
-:1024D000021204C4FFFFFFFF021204C8FFFFFFFF48
-:1024E000021204CCFFFFFFFF021204D0FFFFFFFF28
-:1024F000021204DCFFFFFFFF021204E0FFFFFFFFF8
-:10250000021204E4FFFFFFFF021204E8FFFFFFFFD7
-:10251000021204ECFFFFFFFF021204F0FFFFFFFFB7
-:10252000021204F4FFFFFFFF021204F8FFFFFFFF97
-:10253000021204FCFFFFFFFF02120500FFFFFFFF76
-:1025400002120504FFFFFFFF02120508FFFFFFFF55
-:102550000212050CFFFFFFFF02120510FFFFFFFF35
-:10256000021204D4FFFF3330021204D8FFFF3340BD
-:10257000021204B4F00030000212039000000008C0
-:102580000212039C00000008061203A000000002D3
-:10259000021203BC00000004021203C40000000485
-:1025A000021203D000000000021203DC0000000051
-:1025B0000212036C00000001021203680000003FD9
-:1025C000021201BC00000040021201C00000180805
-:1025D000021201C400000803021201C8000008032F
-:1025E000021201CC00000040021201D000000003E2
-:1025F000021201D400000803021201D800000803EF
-:10260000021201DC00000803021201E000010003D5
-:10261000021201E400000803021201E800000803AE
-:10262000021201EC00000003021201F0000000039E
-:10263000021201F400000003021201F8000000037E
-:10264000021201FC0000000302120200000000035D
-:10265000021202040000000302120208000000033C
-:102660000212020C0000000302120210000000031C
-:1026700002120214000000030212021800000003FC
-:102680000212021C000000030212022000000003DC
-:102690000212022400000003021202280000240398
-:1026A0000212022C0000002F02120230000000096A
-:1026B00002120234000000190212023800000184E4
-:1026C0000212023C000001830212024000000306D5
-:1026D0000212024400000019021202480000000623
-:1026E0000212024C00000306021202500000030610
-:1026F00002120254000003060212025800000C8667
-:102700000212025C000003060212026000000306CF
-:1027100002120264000000060212026800000006B5
-:102720000212026C00000006021202700000000695
-:102730000212027400000006021202780000000675
-:102740000212027C00000006021202800000000655
-:102750000212028400000006021202880000000635
-:102760000212028C00000006021202900000000615
-:1027700002120294000000060212029800000006F5
-:102780000212029C00000006021202A000000306D2
-:10279000021202A400000013021202A800000006A8
-:1027A000021202B000001004021202B40000100471
-:1027B0000212032400106440021203280010644037
-:1027C000021201B0000000010600A0000000001687
-:1027D0000200A06CBF5C00000200A070FFF51FEFBC
-:1027E0000200A0740000FFFF0200A078500003E088
-:1027F0000200A07C000000000200A0800000A000F9
-:102800000600A084000000050200A0980FE0000070
-:102810000600A09C000000140200A0EC555400002B
-:102820000200A0F0555555550200A0F40000555582
-:102830000200A0F8000000000200A0FC55540000B7
-:102840000200A100555555550200A1040000555540
-:102850000200A108000000000200A22C00000000FD
-:102860000600A230000000030200A0600000000784
-:102870000200A10CBF5C00000200A110FFF51FEFD9
-:102880000200A1140000FFFF0200A118500003E0A5
-:102890000200A11C000000000200A1200000A00016
-:1028A0000600A124000000050200A1380FE000008E
-:1028B0000600A13C000000140200A18C5554000049
-:1028C0000200A190555555550200A19400005555A0
-:1028D0000200A198000000000200A19C55540000D5
-:1028E0000200A1A0555555550200A1A40000555560
-:1028F0000200A1A8000000000200A23C00000000AD
-:102900000600A240000000030200A06400000007CF
-:1029100000000000000000000000002E0000000089
-:1029200000000000000000000000000000000000A7
-:102930000000000000000000000000000000000097
-:102940000000000000000000000000000000000087
-:102950000000000000000000000000000000000077
-:102960000000000000000000000000000000000067
-:10297000002E0050000000000000000000000000D9
-:102980000000000000000000000000000000000047
-:102990000000000000000000000000000050008D5A
-:1029A0000000000000000000000000000000000027
-:1029B0000000000000000000000000000000000017
-:1029C0000000000000000000008D009200920096C0
-:1029D0000096009A000000000000000000000000C7
-:1029E00000000000000000000000000000000000E7
-:1029F00000000000009A00DB00DB00E900E900F7BE
-:102A000000000000000000000000000000000000C6
-:102A100000000000000000000000000000000000B6
-:102A200000000000000000000000000000000000A6
-:102A30000000000000000000000000000000000096
-:102A40000000000000000000000000000000000086
-:102A50000000000000000000000000000000000076
-:102A60000000000000000000000000000000000066
-:102A70000000000000000000000000000000000056
-:102A80000000000000000000000000000000000046
-:102A90000000000000000000000000000000000036
-:102AA0000000000000000000000000000000000026
-:102AB0000000000000000000000000000000000016
-:102AC0000000000000000000000000000000000006
-:102AD00000F700FE00000000000000000000000001
-:102AE00000000000000000000000000000000000E6
-:102AF00000000000000000000000000000000000D6
-:102B000000000000000000000000000000000000C5
-:102B100000000000000000000000000000000000B5
-:102B2000000000000000000000FE01030103010E90
-:102B3000010E01190000000000000000000000006C
-:102B40000000000000000000000000000000000085
-:102B50000000000000000000000000000000000075
-:102B60000000000000000000000000000000000065
-:102B70000000000000000000000000000000000055
-:102B80000119011A00000000000000000000000010
-:102B90000000000000000000000000000000000035
-:102BA000000000000000000000000000011A0152B7
-:102BB0000000000000000000000000000000000015
-:102BC0000000000000000000000000000000000005
-:102BD000000000000000000001520176000000002B
-:102BE00000000000000000000000000000000000E5
-:102BF00000000000000000000000000000000000D5
-:102C000000000000017601B5000000000000000097
-:102C100000000000000000000000000000000000B4
-:102C200000000000000000000000000000000000A4
-:102C300001B501F0000000000000000000000000ED
-:102C40000000000000000000000000000000000084
-:102C500000000000000000000000000001F002354C
-:102C6000023502380238023B00000000000000007C
-:102C70000000000000000000000000000000000054
-:102C80000000000000000000023B02760276028095
-:102C90000280028A00000000000000000000000026
-:102CA0000000000000000000000000000000000024
-:102CB00000000000028A028B0000000000000000FB
-:102CC0000000000000000000000000000000000004
-:102CD00000000000000000000000000000000000F4
-:102CE000028B029D000000000000000000000000B8
-:102CF00000000000000000000000000000000000D4
-:102D0000000000000000000000000000029D02B270
-:102D100002B202B502B502B80000000000000000D7
-:102D200000000000000000000000000000000000A3
-:102D3000000000000000000002B802E600000000F1
-:102D40000000000000000000000000000000000083
-:102D50000000000000000000000000000000000073
-:102D60000000000002E6036D00000000000000000B
-:102D70000000000000000000000000000000000053
-:102D80000000000000000000000000000000000043
-:102D9000036D0374037403780378037C0000000060
-:102DA0000000000000000000000000000000000023
-:102DB000000000000000000000000000037C03BBD6
-:102DC00003BB03C303C303CB0000000000000000EB
-:102DD00000000000000000000000000000000000F3
-:102DE000000000000000000003CB041F041F04319A
-:102DF0000431044300000000000000000000000057
-:102E000000000000000000000000000000000000C2
-:102E1000000000000443044D00000000000000001A
-:102E200000000000000000000000000000000000A2
-:102E30000000000000000000000000000000000092
-:102E4000044D0453000000000000000000000000DA
-:102E50000000000000000000000000000000000072
-:102E600000000000000000000000000004530456B1
-:102E70000000000000000000000000000000000052
-:102E80000000000000000000000000000000000042
-:102E900000000000000000000456045B0000000079
-:102EA0000000000000000000000000000000000022
-:102EB0000000000000000000000000000000000012
-:102EC00000000000045B045C045C046E046E04807B
-:102ED00000000000000000000000000000000000F2
-:102EE00000000000000000000000000000000000E2
-:102EF000048004ED0000000000000000000000005D
-:102F000000000000000000000000000000000000C1
-:102F100000000000000000000000000004ED04EECE
-:102F200004EE050205020516000000000000000086
-:102F30000000000000000000000000000000000091
-:102F40000000000000000000000000000000000081
-:102F50000000000000000000000000000000000071
-:102F60000000000000000000000000000000000061
-:102F70000000000000000000000000000000000051
-:102F80000000000000000000000000000000000041
-:102F90000000000000000000000000000000000031
-:102FA000000000000000000000010000000204C05A
-:102FB0000003098000040E4000051300000617C03E
-:102FC00000071C800008214000092600000A2AC0D2
-:102FD000000B2F80000C3440000D3900000E3DC066
-:102FE000000F42800010474000114C00001250C0FA
-:102FF0000013558000145A4000155F00001663C08E
-:103000000017688000186D4000197200001A76C021
-:10301000001B7B80001C8040001D8500001E89C0B5
-:10302000001F8E8000209340000020000000400020
-:1030300000006000000080000000A0000000C00050
-:103040000000E0000001000000012000000140003D
-:1030500000016000000180000001A0000001C0002C
-:103060000001E00000020000000220000002400019
-:1030700000026000000280000002A0000002C00008
-:103080000002E000000300000003200000034000F5
-:1030900000036000000380000003A0000003C000E4
-:1030A0000003E000000400000004200000044000D1
-:1030B00000046000000480000004A0000004C000C0
-:1030C0000004E000000500000005200000054000AD
-:1030D00000056000000580000005A0000005C0009C
-:1030E0000005E00000060000000620000006400089
-:1030F00000066000000680000006A0000006C00078
-:103100000006E00000070000000720000007400064
-:1031100000076000000780000007A0000007C00053
-:103120000007E00000080000000820000008400040
-:1031300000086000000880000008A0000008C0002F
-:103140000008E0000009000000092000000940001C
-:1031500000096000000980000009A0000009C0000B
-:103160000009E000000A0000000A2000000A4000F8
-:10317000000A6000000A8000000AA000000AC000E7
-:10318000000AE000000B0000000B2000000B4000D4
-:10319000000B6000000B8000000BA000000BC000C3
-:1031A000000BE000000C0000000C2000000C4000B0
-:1031B000000C6000000C8000000CA000000CC0009F
-:1031C000000CE000000D0000000D2000000D40008C
-:1031D000000D6000000D8000000DA000000DC0007B
-:1031E000000DE000000E0000000E2000000E400068
-:1031F000000E6000000E8000000EA000000EC00057
-:10320000000EE000000F0000000F2000000F400043
-:10321000000F6000000F8000000FA000000FC00032
-:10322000000FE0000010000000102000001040001F
-:1032300000106000001080000010A0000010C0000E
-:103240000010E000001100000011200000114000FB
-:1032500000116000001180000011A0000011C000EA
-:103260000011E000001200000012200000124000D7
-:1032700000126000001280000012A0000012C000C6
-:103280000012E000001300000013200000134000B3
-:1032900000136000001380000013A0000013C000A2
-:1032A0000013E0000014000000142000001440008F
-:1032B00000146000001480000014A0000014C0007E
-:1032C0000014E0000015000000152000001540006B
-:1032D00000156000001580000015A0000015C0005A
-:1032E0000015E00000160000001620000016400047
-:1032F00000166000001680000016A0000016C00036
-:103300000016E00000170000001720000017400022
-:1033100000176000001780000017A0000017C00011
-:103320000017E000001800000018200000184000FE
-:1033300000186000001880000018A0000018C000ED
-:103340000018E000001900000019200000194000DA
-:1033500000196000001980000019A0000019C000C9
-:103360000019E000001A0000001A2000001A4000B6
-:10337000001A6000001A8000001AA000001AC000A5
-:10338000001AE000001B0000001B2000001B400092
-:10339000001B6000001B8000001BA000001BC00081
-:1033A000001BE000001C0000001C2000001C40006E
-:1033B000001C6000001C8000001CA000001CC0005D
-:1033C000001CE000001D0000001D2000001D40004A
-:1033D000001D6000001D8000001DA000001DC00039
-:1033E000001DE000001E0000001E2000001E400026
-:1033F000001E6000001E8000001EA000001EC00015
-:10340000001EE000001F0000001F2000001F400001
-:10341000001F6000001F8000001FA000001FC000F0
-:10342000001FE000002000000020200000204000DD
-:1034300000206000002080000020A0000020C000CC
-:103440000020E000002100000021200000214000B9
-:1034500000216000002180000021A0000021C000A8
-:103460000021E00000220000002220000022400095
-:1034700000226000002280000022A0000022C00084
-:103480000022E00000230000002320000023400071
-:1034900000236000002380000023A0000023C00060
-:1034A0000023E0000024000000242000002440004D
-:1034B00000246000002480000024A0000024C0003C
-:1034C0000024E00000250000002520000025400029
-:1034D00000256000002580000025A0000025C00018
-:1034E0000025E00000260000002620000026400005
-:1034F00000266000002680000026A0000026C000F4
-:103500000026E000002700000027200000274000E0
-:1035100000276000002780000027A0000027C000CF
-:103520000027E000002800000028200000284000BC
-:1035300000286000002880000028A0000028C000AB
-:103540000028E00000290000002920000029400098
-:1035500000296000002980000029A0000029C00087
-:103560000029E000002A0000002A2000002A400074
-:10357000002A6000002A8000002AA000002AC00063
-:10358000002AE000002B0000002B2000002B400050
-:10359000002B6000002B8000002BA000002BC0003F
-:1035A000002BE000002C0000002C2000002C40002C
-:1035B000002C6000002C8000002CA000002CC0001B
-:1035C000002CE000002D0000002D2000002D400008
-:1035D000002D6000002D8000002DA000002DC000F7
-:1035E000002DE000002E0000002E2000002E4000E4
-:1035F000002E6000002E8000002EA000002EC000D3
-:10360000002EE000002F0000002F2000002F4000BF
-:10361000002F6000002F8000002FA000002FC000AE
-:10362000002FE0000030000000302000003040009B
-:1036300000306000003080000030A0000030C0008A
-:103640000030E00000310000003120000031400077
-:1036500000316000003180000031A0000031C00066
-:103660000031E00000320000003220000032400053
-:1036700000326000003280000032A0000032C00042
-:103680000032E0000033000000332000003340002F
-:1036900000336000003380000033A0000033C0001E
-:1036A0000033E0000034000000342000003440000B
-:1036B00000346000003480000034A0000034C000FA
-:1036C0000034E000003500000035200000354000E7
-:1036D00000356000003580000035A0000035C000D6
-:1036E0000035E000003600000036200000364000C3
-:1036F00000366000003680000036A0000036C000B2
-:103700000036E0000037000000372000003740009E
-:1037100000376000003780000037A0000037C0008D
-:103720000037E0000038000000382000003840007A
-:1037300000386000003880000038A0000038C00069
-:103740000038E00000390000003920000039400056
-:1037500000396000003980000039A0000039C00045
-:103760000039E000003A0000003A2000003A400032
-:10377000003A6000003A8000003AA000003AC00021
-:10378000003AE000003B0000003B2000003B40000E
-:10379000003B6000003B8000003BA000003BC000FD
-:1037A000003BE000003C0000003C2000003C4000EA
-:1037B000003C6000003C8000003CA000003CC000D9
-:1037C000003CE000003D0000003D2000003D4000C6
-:1037D000003D6000003D8000003DA000003DC000B5
-:1037E000003DE000003E0000003E2000003E4000A2
-:1037F000003E6000003E8000003EA000003EC00091
-:10380000003EE000003F0000003F2000003F40007D
-:10381000003F6000003F8000003FA000003FC0006C
-:10382000003FE000003FE00100000000000001FF59
-:103830000000020000007FF800007FF80000026F27
-:1038400000001500000000010000000300BEBC20C5
-:103850000000000300BEBC2000000001FFFFFFFFCE
-:10386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
-:10387000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58
-:1038800000000000FFFFFFFF00000000FFFFFFFF40
-:103890000000000300BEBC20FFFFFFFF000000008F
-:1038A000FFFFFFFF00000000FFFFFFFF000000031D
-:1038B00000BEBC2000002000000040C0000061806D
-:1038C000000082400000A3000000C3C00000E480AC
-:1038D0000001054000012600000146C0000167808C
-:1038E000000188400001A9000001C9C00001EA8070
-:1038F00000020B4000022C0000024CC000026D8050
-:1039000000028E400002AF000002CFC00002F08033
-:103910000003114000033200000352C00003738013
-:10392000000394400003B5000003D5C00003F680F7
-:103930000004174000043800000458C000047980D7
-:1039400000049A400000800000010380000187000D
-:1039500000020A8000028E0000031180000395001F
-:103960000004188000049C0000051F800005A300CF
-:10397000000626800006AA0000072D800007B1007F
-:10398000000834800008B80000093B800009BF002F
-:10399000000A4280000AC600000B4980000BCD00DF
-:1039A000000C5080000CD400000D5780000DDB008F
-:1039B00000007FF800007FF800000174000015008F
-:1039C0000000190000000000FFFFFFFF40000000A2
-:1039D00040000000400000004000000040000000E7
-:1039E00040000000400000004000000040000000D7
-:1039F00040000000400000004000000040000000C7
-:103A000040000000400000004000000040000000B6
-:103A100040000000400000004000000040000000A6
-:103A20004000000040000000400000004000000096
-:103A30004000000040000000400000004000000086
-:103A400040000000400000004000000000007FF83F
-:103A500000007FF80000050900003500FFFFFFFFB0
-:103A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
-:103A7000FFFFFFFFFFFFFFFFFFFFFFFF4000000012
-:103A80004000000040000000400000004000000036
-:103A90004000000040000000400000004000000026
-:103AA0004000000040000000400000004000000016
-:103AB0004000000040000000400000004000000006
-:103AC00040000000400000004000000040000000F6
-:103AD00040000000400000004000000040000000E6
-:103AE00040000000400000004000000040000000D6
-:103AF00040000000400000004000000000001000F6
-:103B000000002080000031000000418000005200D1
-:103B100000006280000073000000838000009400B9
-:103B20000000A4800000B5000000C5800000D600A1
-:103B30000000E6800000F700000107800001180087
-:103B400000012880000139000001498000015A006D
-:103B500000016A8000017B0000018B8000019C0055
-:103B60000001AC800001BD000001CD800001DE003D
-:103B70000001EE800001FF0000007FF800007FF8E8
-:103B8000000004480000150010000000000028ADEF
-:103B9000000000000001000100070205CCCCCCC1F0
-:103BA000FFFFFFFFFFFFFFFF7058103C0000000009
-:103BB0000000000000000001CCCC0201CCCCCCCC39
-:103BC00000000000FFFFFFFF400000004000000079
-:103BD00040000000400000004000000040000000E5
-:103BE00040000000400000004000000040000000D5
-:103BF00040000000400000004000000040000000C5
-:103C000040000000400000004000000040000000B4
-:103C100040000000400000004000000040000000A4
-:103C20004000000040000000400000004000000094
-:103C30004000000040000000400000004000000084
-:103C40004000000040000000000E01B7011600D641
-:103C50000000FFFF000000000000FFFF0000000068
-:103C60000000FFFF000000000000FFFF0000000058
-:103C70000000FFFF000000000000FFFF0000000048
-:103C80000000FFFF000000000000FFFF0000000038
-:103C90000010000000000000007201BB012300F3CF
-:103CA0000000FFFF000000000000FFFF0000000018
-:103CB0000000FFFF000000000000FFFF0000000008
-:103CC0000000FFFF000000000000FFFF00000000F8
-:103CD0000000FFFF000000000000FFFF00000000E8
-:103CE0000010000000000000FFFFFFF3318FFFFF16
-:103CF0000C30C30CC30C30C3CF3CF300F3CF3CF308
-:103D00000000CF3CCDCDCDCDFFFFFFF130EFFFFF69
-:103D10000C30C30CC30C30C3CF3CF300F3CF3CF3E7
-:103D20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD3
-:103D30000C30C30CC30C30C3CF3CF300F3CF3CF3C7
-:103D40000002CF3CCDCDCDCDFFFFF4061CBFFFFF61
-:103D50000C30C305C30C30C3CF300014F3CF3CF399
-:103D60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA4
-:103D70000C30C30CC30C30C3CF3CF300F3CF3CF387
-:103D80000008CF3CCDCDCDCDFFFFFFFA302FFFFF98
-:103D90000C30C30CC30C30C3CF3CF300F3CF3CF367
-:103DA0000010CF3CCDCDCDCDFFFFFFF731EFFFFFB2
-:103DB0000C30C30CC30C30C3CF3CF300F3CF3CF347
-:103DC0000020CF3CCDCDCDCDFFFFFFF5302FFFFF45
-:103DD0000C30C30CC30C30C3CF3CF300F3CF3CF327
-:103DE0000040CF3CCDCDCDCDFFFFFFF3318FFFFFA6
-:103DF0000C30C30CC30C30C3CF3CF300F3CF3CF307
-:103E00000000CF3CCDCDCDCDFFFFFFF1310FFFFF47
-:103E10000C30C30CC30C30C3CF3CF300F3CF3CF3E6
-:103E20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD2
-:103E30000C30C30CC30C30C3CF3CF300F3CF3CF3C6
-:103E40000002CF3CCDCDCDCDFFFFF4061CBFFFFF60
-:103E50000C30C305C30C30C3CF300014F3CF3CF398
-:103E60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA3
-:103E70000C30C30CC30C30C3CF3CF300F3CF3CF386
-:103E80000008CF3CCDCDCDCDFFFFFFFA302FFFFF97
-:103E90000C30C30CC30C30C3CF3CF300F3CF3CF366
-:103EA0000010CF3CCDCDCDCDFFFFFFF730EFFFFFB2
-:103EB0000C30C30CC30C30C3CF3CF300F3CF3CF346
-:103EC0000020CF3CCDCDCDCDFFFFFFF5304FFFFF24
-:103ED0000C30C30CC30C30C3CF3CF300F3CF3CF326
-:103EE0000040CF3CCDCDCDCDFFFFFFF331EFFFFF45
-:103EF0000C30C30CC30C30C3CF3CF300F3CF3CF306
-:103F00000000CF3CCDCDCDCDFFFFFFF1310FFFFF46
-:103F10000C30C30CC30C30C3CF3CF300F3CF3CF3E5
-:103F20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD1
-:103F30000C30C30CC30C30C3CF3CF300F3CF3CF3C5
-:103F40000002CF3CCDCDCDCDFFFFF4061CBFFFFF5F
-:103F50000C30C305C30C30C3CF300014F3CF3CF397
-:103F60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA2
-:103F70000C30C30CC30C30C3CF3CF300F3CF3CF385
-:103F80000008CF3CCDCDCDCDFFFFFFFA302FFFFF96
-:103F90000C30C30CC30C30C3CF3CF300F3CF3CF365
-:103FA0000010CF3CCDCDCDCDFFFFFF97056FFFFFBC
-:103FB0000C30C30CC30C30C3CF3CC000F3CF3CF378
-:103FC0000020CF3CCDCDCDCDFFFFFFF5310FFFFF62
-:103FD0000C30C30CC30C30C3CF3CF300F3CF3CF325
-:103FE0000040CF3CCDCDCDCDFFFFFFF3320FFFFF23
-:103FF0000C30C30CC30C30C3CF3CF300F3CF3CF305
-:104000000000CF3CCDCDCDCDFFFFFFF1310FFFFF45
-:104010000C30C30CC30C30C3CF3CF300F3CF3CF3E4
-:104020000001CF3CCDCDCDCDFFFFFFF6305FFFFFD0
-:104030000C30C30CC30C30C3CF3CF300F3CF3CF3C4
-:104040000002CF3CCDCDCDCDFFFFF4061CBFFFFF5E
-:104050000C30C305C30C30C3CF300014F3CF3CF396
-:104060000004CF3CCDCDCDCDFFFFFFF2304FFFFFA1
-:104070000C30C30CC30C30C3CF3CF300F3CF3CF384
-:104080000008CF3CCDCDCDCDFFFFFF8A042FFFFF31
-:104090000C30C30CC30C30C3CF3CC000F3CF3CF397
-:1040A0000010CF3CCDCDCDCDFFFFFF9705CFFFFF5B
-:1040B0000C30C30CC30C30C3CF3CC000F3CF3CF377
-:1040C0000020CF3CCDCDCDCDFFFFFFF5310FFFFF61
-:1040D0000C30C30CC30C30C3CF3CF300F3CF3CF324
-:1040E0000040CF3CCDCDCDCDFFFFFFF3300FFFFF24
-:1040F0000C30C30CC30C30C3CF3CF300F3CF3CF304
-:104100000000CF3CCDCDCDCDFFFFFFF1300FFFFF45
-:104110000C30C30CC30C30C3CF3CF300F3CF3CF3E3
-:104120000001CF3CCDCDCDCDFFFFFFF6305FFFFFCF
-:104130000C30C30CC30C30C3CF3CF300F3CF3CF3C3
-:104140000002CF3CCDCDCDCDFFFFF4061CBFFFFF5D
-:104150000C30C305C30C30C3CF300014F3CF3CF395
-:104160000004CF3CCDCDCDCDFFFFFFF2304FFFFFA0
-:104170000C30C30CC30C30C3CF3CF300F3CF3CF383
-:104180000008CF3CCDCDCDCDFFFFFFFA302FFFFF94
-:104190000C30C30CC30C30C3CF3CF300F3CF3CF363
-:1041A0000010CF3CCDCDCDCDFFFFFF97040FFFFF1B
-:1041B0000C30C30CC30C30C3CF3CC000F3CF3CF376
-:1041C0000020CF3CCDCDCDCDFFFFFFF5300FFFFF61
-:1041D0000C30C30CC30C30C3CF3CF300F3CF3CF323
-:1041E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF57
-:1041F0000C30C30CC30C30C3CF3CF3CCF3CF3CF337
-:104200000000CF3CCDCDCDCDFFFFFFFF30CFFFFF76
-:104210000C30C30CC30C30C3CF3CF3CCF3CF3CF316
-:104220000001CF3CCDCDCDCDFFFFFFFF30CFFFFF55
-:104230000C30C30CC30C30C3CF3CF3CCF3CF3CF3F6
-:104240000002CF3CCDCDCDCDFFFFFFFF30CFFFFF34
-:104250000C30C30CC30C30C3CF3CF3CCF3CF3CF3D6
-:104260000004CF3CCDCDCDCDFFFFFFFF30CFFFFF12
-:104270000C30C30CC30C30C3CF3CF3CCF3CF3CF3B6
-:104280000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEE
-:104290000C30C30CC30C30C3CF3CF3CCF3CF3CF396
-:1042A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC6
-:1042B0000C30C30CC30C30C3CF3CF3CCF3CF3CF376
-:1042C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF96
-:1042D0000C30C30CC30C30C3CF3CF3CCF3CF3CF356
-:1042E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF56
-:1042F0000C30C30CC30C30C3CF3CF3CCF3CF3CF336
-:104300000000CF3CCDCDCDCDFFFFFFFF30CFFFFF75
-:104310000C30C30CC30C30C3CF3CF3CCF3CF3CF315
-:104320000001CF3CCDCDCDCDFFFFFFFF30CFFFFF54
-:104330000C30C30CC30C30C3CF3CF3CCF3CF3CF3F5
-:104340000002CF3CCDCDCDCDFFFFFFFF30CFFFFF33
-:104350000C30C30CC30C30C3CF3CF3CCF3CF3CF3D5
-:104360000004CF3CCDCDCDCDFFFFFFFF30CFFFFF11
-:104370000C30C30CC30C30C3CF3CF3CCF3CF3CF3B5
-:104380000008CF3CCDCDCDCDFFFFFFFF30CFFFFFED
-:104390000C30C30CC30C30C3CF3CF3CCF3CF3CF395
-:1043A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC5
-:1043B0000C30C30CC30C30C3CF3CF3CCF3CF3CF375
-:1043C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF95
-:1043D0000C30C30CC30C30C3CF3CF3CCF3CF3CF355
-:1043E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF55
-:1043F0000C30C30CC30C30C3CF3CF3CCF3CF3CF335
-:104400000000CF3CCDCDCDCDFFFFFFFF30CFFFFF74
-:104410000C30C30CC30C30C3CF3CF3CCF3CF3CF314
-:104420000001CF3CCDCDCDCDFFFFFFFF30CFFFFF53
-:104430000C30C30CC30C30C3CF3CF3CCF3CF3CF3F4
-:104440000002CF3CCDCDCDCDFFFFFFFF30CFFFFF32
-:104450000C30C30CC30C30C3CF3CF3CCF3CF3CF3D4
-:104460000004CF3CCDCDCDCDFFFFFFFF30CFFFFF10
-:104470000C30C30CC30C30C3CF3CF3CCF3CF3CF3B4
-:104480000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEC
-:104490000C30C30CC30C30C3CF3CF3CCF3CF3CF394
-:1044A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC4
-:1044B0000C30C30CC30C30C3CF3CF3CCF3CF3CF374
-:1044C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF94
-:1044D0000C30C30CC30C30C3CF3CF3CCF3CF3CF354
-:1044E0000040CF3CCDCDCDCD000C0000000700C07A
-:1044F00000028130000B81580002021000010230DE
-:10450000000F024000010330000C0000000800C052
-:1045100000028140000B816800020220000102407D
-:1045200000070250000202C0000F0000000800F067
-:1045300000028170000B819800020250000102709D
-:10454000000B828000080338001000000008010002
-:1045500000028180000B81A80002026000018280BD
-:10456000000E82980008038000028000000B802863
-:10457000000200E0000101000000811000000118AD
-:10458000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC6B
-:1045900000002000CCCCCCCCCCCCCCCCCCCCCCCC6B
-:1045A000CCCCCCCC00002000CCCCCCCCCCCCCCCC5B
-:1045B000CCCCCCCCCCCCCCCC00002000000000007B
-:1045C0001F8B080000000000000BFB51CFC0F00360
-:1045D0008A7BD81818F67020F843015F646260B8CF
-:1045E0000CC45781588099812198918121849178B8
-:1045F000FD19A208F63B210606296106860841A09E
-:1046000079C208F1D3403576220C0C8C22107E2B17
-:1046100090E612A58EFB071AEF94C214DB26816088
-:10462000EFC2228F8C77A3C98B4AA2F2F710D03F3A
-:10463000D0F895222A5F5601429741C55FA3C9CBA6
-:1046400041E56F41FDF54611BBB9B7A1F2009CB43D
-:10465000B6A260030000000000000000000000009F
-:104660001F8B080000000000000BED7D0B7854D577
-:10467000B5F03E73CE9C9949662627214F1E6112E4
-:1046800020028638BC0228F73A212140A575A055A2
-:10469000D1A21D3040C85B8A5E5ADB2F130831025D
-:1046A000DAE08F8A16EDF0AAA8A80123450B7478EA
-:1046B0008A5E6F6FB06A69B5DE888A8A3C22AD4A2D
-:1046C000EF6D7FFFB5D6DE3B73CE6402D8AFF7FE49
-:1046D000F7BFDF1F3FBFC33E7B9FBDD75EAFBDD6D9
-:1046E000DA6BEFB1DB1C4CBF96B1AFF00F9EF53625
-:1046F000C65846ECF9A89D7D2FE866AC60BD6F8575
-:104700003B1DDEEFCEDB91EC632C67CF5A650ABC14
-:10471000CFD9D0A6CC2F8C7D1F7041E57878BF7B98
-:10472000AD5202EF735E6B53E6E1D361639DD09EA1
-:1047300069BE14864F16602C93B1211399F80BB8FB
-:10474000738A191B88FF842ECE1BC98C8D632C6F36
-:10475000A52D1256E07DA87226F332B619E0CA499B
-:1047600083EFD4BFECB763DB06ED44979331A7E644
-:10477000D4BECA672C770EB331780E5EC6DFE3DF96
-:1047800057F07F5ED85A1EC24CE53C2C7BD24FC2FC
-:1047900090CCC33C5FA989E0EDD683A362F394CFAC
-:1047A0000D8DBE4CB7D6FBBD7C2EB9E363FD1EF864
-:1047B000FA716C3794B1485CFBDAB0AEB1ABE0098A
-:1047C00008682FECFDFD4C56528C74B88D4DA167D6
-:1047D000BDE6BB09F1527FD4CEC200777DC3C9725A
-:1047E0002CB3DD0A1B96D7FBFB51CC4EF428618A13
-:1047F0007612E7EB655E9C9F5AE37BB81CF0DC9079
-:104800001C28C37E1F490ED153BECF9E3F3D3B04A3
-:10481000F0942E2A0C33A0FBF9F58ADF019F7FA4C8
-:1048200044743BD0A3FA3B0D45D3A0DD9B7AE83A14
-:10483000FC6E911A6DB1C3F8B5731B0A8002AC53BC
-:10484000E7FC337877C9271AD06D3063E19434A43C
-:104850000B63274C74C0BF13C34559ED1B8F977A68
-:1048600056603F1AF612A1F9CAF779E1A34386C64A
-:104870008DC78A091E867032D6A524A2EBE0174B9D
-:104880008E6A457D8FF79F3F8F309743C01DD2B70B
-:10489000D6A34796037E4B5FB047AF057AD46E54DC
-:1048A000220E28DBF6B902489FB35BA00C74897A0C
-:1048B000746A7FC67052B9DED179FF3550EE7E4101
-:1048C000659BB0DBE1493694BB930276360ECA8015
-:1048D0008F852E5EACDDB8FF36ECAF72B783B99032
-:1048E0009E2F2EFAD635505E04FC864D6AB736E907
-:1048F000FDA1BC38A2B463F9DC1446FC114ED323ED
-:104900005B61BC73DECECC1B405E4E353A990F40E6
-:1049100059E1E9CCFC0EF051556447397E57B55D3D
-:10492000F123DA4B5FD87A2407E7F524F015F0512C
-:10493000F5B664E693F883FF4FC254AE85FA25308E
-:104940004F94FF45ACAD9CA938FE5ADDE789E1EBF9
-:1049500054A341E3F4C8D393300E7C57F7ACE2C7BD
-:1049600029D6D95808E5EAEC8BAE399BDD38BF264D
-:10497000BDC083F3BA47C7768B22F376A1CAAA8A51
-:104980006CD4CBA1BE6AC3467D6121E20DF45E21E9
-:10499000C2D5CF0AD77A3580F85D92EADCA4027ED0
-:1049A000983B903D3B01FF9C6A043556102B57A164
-:1049B0007C933E89E8B34CEDCB9554E2D7EA6D2A5F
-:1049C000F359F889D33F7C8CD33FBCD713D99A17BE
-:1049D000A3DF1283EB4949BF25A9829E5A77712232
-:1049E00078EE477A003C6D882F78AE11F07927B3C6
-:1049F000120DE8E20D30436197E6CF363B9BC7606E
-:104A0000ECD7D982803609CA3ABB83F91933B4DAB4
-:104A1000401994FFC282AFE17C18F3FB8280E71655
-:104A200085CDC1791F4660613E2D393AE1AF6D6A8F
-:104A3000F166551130A76379E1CF57E5D1F76FD013
-:104A4000F71A7C3FAAEFEF8DF28996EF8DF24AF9C3
-:104A5000FD3BD88E392FFE7D5BF9D5D6F1CBABE48B
-:104A6000F71FD0F8EE8BC36F4C9B6C1D7F5A0D7DEA
-:104A70005FEFE0F4EA4E75463641B9D9E50F684874
-:104A8000378D45F1BD9656B009DBA9921F58674096
-:104A900085EFDDDB53C7AC6266BE98F2271CCF03FF
-:104AA000D262E68B948949167E4C0DA459CAD093E4
-:104AB00071F2CA981E0A789D048FDE5F277D51D25D
-:104AC000DF49F0DEB5CF45E5BBAEE6F0DED5DF4D24
-:104AD000728630B01C28EBA1AB0CD37A04702A2C60
-:104AE0009BB1CF95904B196F7EEFB3E1FB249535C9
-:104AF000E07C921C8CF4D13D79C59BC326FCB40E9E
-:104B000002FA42395DD1391E055EEF19B4307B9E41
-:104B1000699C9641FA9C4D85FCFDED6E1C2F98A971
-:104B2000A01ED4BB0B0C77EF711CF9132DE3387367
-:104B30002B699CBCB8711CB99571E338E76C12EF16
-:104B4000C538432E36CE3DF9575BE7935B45E314FA
-:104B5000C5CF27B72A6E9C243E1F782FC6F123FEAF
-:104B6000FA9CCF90C9D6F90CAEA171AEC171C69BAB
-:104B7000E633B8266E1C378D83EF711C30A47C2C75
-:104B80000BE8EEE85E48F4FF958BEC05DD117A0248
-:104B9000FB656FBB18E9131F8C9B857A0516679020
-:104BA0005F4D49A371BE4802FABBCD74E6FA889EF8
-:104BB000A07F16081059042002FD532778B462FB29
-:104BC000ACDC267CEE2ECD9E8776C93A8F7F188886
-:104BD000CED9DDA5FAED09EC9B056DF6935D16FEC9
-:104BE000157A6F0A1BDE00E377A0B231954F82FE83
-:104BF00062A0B74E80FEC2E747C23EFD00F41BD361
-:104C0000CDF036D13C4E6A1C8F2737F075E48BB55A
-:104C1000C7EC60ECE1306F1402DC378A692C680362
-:104C2000E3CF2467F5821EDD2F3A229B881E810187
-:104C300036E073B6BE1FE04AB4033BF30FC21E85D5
-:104C4000BF0136B0656F69DD71189BBDA5CC1BB483
-:104C500004E63BA763AD7D0094CFDABB6EF3BB4D9A
-:104C6000FDCCB19FC0793BE13FECE7E690DD629F70
-:104C70007EB7D25ABE35CE5EAD51F2053DC4B8BE48
-:104C8000881DE975632687E7567C8EC16A83E875BF
-:104C90009BC1BF95F0D4DF6D67515A8FBA3258214E
-:104CA000E22383ECA2905C57E2E0BBCDEE0C0481E2
-:104CB0009EB7FD40253CC6C3DBB52F3960037BA9F9
-:104CC0006BFD1FED687F5F0AFEEF2DB3D6B3301F7B
-:104CD0004FE255F2C14D734AFA7D606A77736846B8
-:104CE000BF0F4CFCF2DDCA5996F2AD0D375BDA7F8F
-:104CF0006FD93C4BFDBCF0624BFDEDAD7758CA0B54
-:104D0000DA7E6069BF687D93A57E71E45E4B7DF5B8
-:104D1000B6B596726DFB2396F6F5BB375AEA6DFB76
-:104D2000465C8FF2B8E24D95A17DF6B9FBE4FD68D3
-:104D30005F7D6E687E6C5387BC0672F8716336F1D6
-:104D4000F7A9461F3DCFEE1EEB447BBC3E09E4199C
-:104D5000D6FA7DCA1FC2AD93518F407BD0E1079434
-:104D6000F7C361709E5E517CC4F7EA7A9D45815518
-:104D70001596D6C3D7DD6AAC5EEB82FAB17DD7ABB0
-:104D8000EBB584F55A9796B0DF734A7701DA77E18D
-:104D9000DF3918DA817DD90FF03700D78BBEEA4FA3
-:104DA000DB5865BB49EF9C546CC407372A534EA2AD
-:104DB0007EAED1B9BCD7ECCC9982FE608D1E2D6839
-:104DC000705F64BC7600260BFBC9A7792D8E0C881A
-:104DD000C92FD16F8845EE97B2D087A89F4FEF5764
-:104DE00049CFB2E8C1DC6F8FC2F10327F13DDB9DF3
-:104DF00041EBE35B8D817E1F803F77BC713A3D7F45
-:104E0000DF18ECF701E89A771AE750F9DDC6103D94
-:104E1000BB1A2BE979A2B181EA3F685C46E5938D24
-:104E2000617A7EDCD84ACF538D6D547FBA713D953F
-:104E3000CF3646E8D9E307087B94A50BFB4FD8EBA8
-:104E4000B07250F9BC98830AFFE67EAB3F1BE5FACF
-:104E5000BCFB8B02B473CF1F07C324817F289FF153
-:104E6000FCD637FD02B4DE2F8C00FDC7F6AE7725E9
-:104E700071FAB86C6C3A03FD73EF309D69307ED2E5
-:104E8000AFAE247B19DE6B8CF465C43FCB93A07F5F
-:104E90009C73D6A5E9D4C31F8FFE4731C61F6E147D
-:104EA000FA30E9A0DAC0E9B6D98F7433E18FDB6557
-:104EB0002F087D1E8747B2E5727AE3F34C86C467FC
-:104EC000672EC601D629C11136E083F31D0E9AD78D
-:104ED000F93DC91186DF627064D2C5F0C6E1A8DE73
-:104EE000E632CCFAA1B63DD5B0EA8B1CC3AC2FCECE
-:104EF0001FDDEC45B95F926D333E188BFC1110FC41
-:104F0000C1F94EF65FDB9E67B82DFD58CBE7DB9409
-:104F1000E9E80781724FF94E02FF403E9764EBC605
-:104F20000720DFA7B60D49C171C18F33709CD38DA7
-:104F300086C1C7CD36CC7C59B32C89DA4BF8FAEA56
-:104F4000F7EF0D1F5A06EF3B19A1FEAB215FDFCF34
-:104F500066DA9F289EC3F6D8BFC075C701FF7F459C
-:104F6000F1008DCAB2DFFA7635ECB80ADF6FB78C84
-:104F700007DFF9A40F8DEB55DF74D7D849535CA038
-:104F80000EC720FFC849740E418F29D0DF39CDDD0F
-:104F9000AAC038D36D3EAAAF17FC58EBECD243F051
-:104FA000EA4C07A7475FE39C6A3CEAD3407F543A48
-:104FB000C12383712ADB4794A17E3CD3B122330401
-:104FC0007C5BAD9EBF2B98E0FB569BC2E189D8BBB2
-:104FD000BB4CF3917114C6A05F670C7EE4F493A6FA
-:104FE00072BCBE96CF07B05FE08FBAEDC7CAAF0103
-:104FF000F8EB767FA6231CD36DA1076C19B1F92BB2
-:10500000387FE8A76ADB7B3ACEEF637BB8E0EE8BB4
-:10501000E8A9DE70BAB3296E27E10BB34EB463E69C
-:10502000F7C4157D37BD0DA2F9C93FDBD92A8083AE
-:10503000FD055A41BD5DD456B0A017F135BFA39A06
-:10504000E28B9FD8A4DDD4568CFC7186D9A6E3FCF4
-:10505000CEB0D7BD634DF8EBB071BB9FB5723B26A8
-:105060000CFF213C60CF5AEC9A45EBADE5856C76A0
-:1050700026EA8D85EBEC2C02285A8C7691E40F9869
-:10508000F7161BB77717B18616B4E73407F70FE6A4
-:105090001B4C1B0070D5FEE2B162B4FB7F69B311FB
-:1050A0007D649C61711A87BB2A3DA207A0FEFD8E1C
-:1050B000B1375E83DCE788B4E0BACC52987F2BEB43
-:1050C0008DCFDB5BADF05D0AFE7878195B6E8143B6
-:1050D000F62BE150B729814802BE7B45F29DD023D3
-:1050E00069AAD5CECF8A2BBF6313F14B95A948E7A8
-:1050F0003386336C4BA17A7F14E3233B1DFE1540AE
-:10510000DF3B6DC12ED4CF6017143153BB3B6D21F3
-:105110007A7F5A796D21DAA74C8B16A17F0F6B8AA3
-:1051200086FCA00B7E5093BC45188FF530583F414C
-:105130002E1D081FF4D3E2A99CC98A30FE0A720A08
-:10514000FDDDE72D3FAA40D9E5EE60D89F23DB1AAD
-:105150005F76F9ACE57AFC07D26138A3384EF2707D
-:105160006B3D2C580CF9CDE3B7BEFFF71E3C4589CB
-:105170006FBDC4D2F074BAA32A8CCF266AA7CD76AD
-:10518000739D93C34F7E39B45F2AECF93AE60B5313
-:105190009C389BF3C1D219368267A9C7E70F43BD7C
-:1051A000A20518CA1FC6AACDEB58FD0510B97EA6E8
-:1051B000B2D6AD235FD65FD05804F47D912DE45173
-:1051C000C723FE0264E73A01595F01C89A7BBAC55A
-:1051D000EE6503D3C4FA3AD030CBEB40A4F3F81811
-:1051E0009DA55EB00BBD08FA224BCD403DD85D4E6B
-:1051F0007E09EB223D21DBE9B17603118EBEDAB9DF
-:1052000062EDF212F557FB8B67768501FF55CF3DB6
-:10521000E805E2B34FB4B64C3FBCAFD9BAD28B7CF1
-:10522000FCB116F6E2BC3F89A8D313F1F38DAA2294
-:10523000FCB1805B417F58D0E9D453ABBF8578FF88
-:1052400062ABDDC026F5DB1C510710B1AE6331E760
-:10525000A76D8EF778F99ECF909EF5BBADF256F50F
-:10526000C4839918EF040C71BF9145C97EAEDBF27F
-:105270006139DA23F5AC9BF444FC7738FE85345A67
-:10528000BFE6E929BDEBE5FE4BBDE0FBFA8ED59FFD
-:10529000A95E2C5BE5BB52F823D3544F3AC5952643
-:1052A000B0094837890716E1F6F08A271F2E7A0FD2
-:1052B000E038BDE59FBD8A256EC4F5C3F9F6DB7FF6
-:1052C000F692AF6FBD7E56F8F3B1EF22F49D6F37C3
-:1052D000B7DFD91EFEACB147BDE82FD56CB4FB419A
-:1052E0003259CD339B7FFE28F2F5EF1C1467A87E60
-:1052F000E6F05B5743B97A873D7D269F865BC98C74
-:10530000D1A31EFE5F362686FFAAE70FEBBE51FC37
-:10531000FD8FD26274A8DEB15F67A37AE3ADB47D7E
-:10532000BFDEE54E408FF6F7CAD1DE5EF1E4973A74
-:10533000CAD527FB149695D7FBFBCA8D87C99E4318
-:105340003C11FD047D7AE8D58B4ED16FBD348EDAE9
-:1053500019B87EF545A791B8F665101F3FFB12C638
-:10536000EF7FEFF0E3FC2B9FFDBE17E7F191D6C076
-:10537000F9F9B195990118B7D21ECE34E8C9DF57B3
-:105380003E7E27F1D9A2637766523C8005726CB4E9
-:10539000868673707E0B36DC40F35BC842C46F9523
-:1053A0008FA9C108C6B334367D470279784DC8C38A
-:1053B000479B1CB8F6B08F50C1A27FF8BA4AFB04D5
-:1053C0008CDD41F1863BE53E045B42E5CF9D9C4E82
-:1053D0009B559B8C6F382D7CBAE59E4EA4CFA9417E
-:1053E000812C8C4F021EC2025F0AEA1DF5D8D42C14
-:1053F0004E1FE6D38AC577A0174BF13DB6EFB40731
-:105400005C4596EFC43AC6C75F2AC607B893D01E5C
-:10541000FB2813EC9B04F3FB52957A19EC0D137FD8
-:1054200099E49ACBF9967BB95C4B398FCC9A8EF57F
-:105430007F7A83CB0F7E87EB3AC015CDA2FAFDDFD2
-:1054400051480F385834913C6FB10B79B6D6CBFD2B
-:1054500049805BC3F529C627D07F1AE19FECB4854C
-:10546000EBE03B935EAEC7F1A89D1E7B6F5AD7174A
-:1054700009F97F5915FBA342FED9062EF77DDBBD46
-:1054800061EE1FD8233F7F14E515E413D7999A677F
-:10549000EC419CF7A7DB0FBE750BF0F5A7ED524E64
-:1054A000AD7A335E4E2B778E6789E4F453B79F2530
-:1054B0009453789F504EDD5DC4C7FFD97A53E2ED17
-:1054C0006C9CDE947AB02FFCC5EBC135AA2FA11ECF
-:1054D00084BF3758716FBE93FC26F9ACEAE9DAC194
-:1054E000143792FC28F9AD871F25BFC5CFD38AB7E3
-:1054F000F8FA1785BE9174B62F67610FC64BF7AAED
-:10550000E45F9F03985A80BEE7B6E74530EEBCD211
-:10551000C5E317E78C6E6F1A3C57A6F2727786DEEA
-:1055200082FA41BEEF76F1F8F6B960B737D5E457A5
-:10553000BCB747F5FAA0BE2BC2A627F23740F3123C
-:105540001C5DACAF7A1E0F9EAABA7397A1DFDEA6D0
-:10555000D27E7645D34D5EDC073EB767C84F503FDD
-:105560002D78050C4C80F71CDA812938BD808679AE
-:1055700009B70B7A7FCCC20F4D86F9DDBE87FB0BD6
-:10558000156BE2EC7BF7521DF50DD8F727AC716D6A
-:10559000CE3755A29FCA0DD6FA2AB686E85615C749
-:1055A0004721E1074ED0041F8D66A3851FC6E31770
-:1055B000425F4D550B7F8276C6B9A33CAE787E8F95
-:1055C0004AF83FBF5D8960DC87E2BB9390FEDD3A1D
-:1055D00033F9CBA791DFF4BEE5F8F40B7F28BE1BAF
-:1055E0009AD4EC7ABBE8A7F03CBDEB7705BFC4F2D8
-:1055F0002F7E9BFB36EBDDBE74DF9F69FFF8DC3E40
-:1056000007C1716EDFCBB97763F925871FE13CB71E
-:10561000DC41FB67E17D9EC830AC1F04F4C67573A6
-:10562000EF97455DB4EE34139DE66B7CBFE3FC9EC3
-:10563000FF7857C1FC833D0E1FCEA37E1FCF0BA961
-:105640007FC9457197737BBF2C0EB9FF7EF3A9D339
-:105650005988F8CFC3E6EC447E4DE5FB00F5BF9CCE
-:10566000B4B909F7C33BF6EBB8BF52FAABBF16A10A
-:105670007E39B793DB0967ED5D8FE33E68AD367425
-:10568000B91DE51E6DB6FE6077DA174C091726C204
-:105690000BC7C339C003CE0BF052897AB12F7C34CB
-:1056A0006BDCDFFCEF878FCF6EC3F16BF64C20B95C
-:1056B00089E14509F0F79E8853A1F9F3F7FBBE2C69
-:1056C00042BBE7D3F6265AC72F35EFCDFFE3E6AD51
-:1056D000442F67DE07FE9BF3FF748DAF4BF172D052
-:1056E0009BCF7F7117959FF5F809DECB94FF13FFD1
-:1056F000D3E8BE13E8EEBD34DD15FB7FD7795F8AB2
-:10570000EEAF08BA7B0CCC2B38B7F7AF142F97F35A
-:10571000BFD4BC7DFF8FCE5BDA3FAB6CFEB67C683E
-:10572000BF86453B7D00E7CAE1B3DB30CC046E4267
-:1057300030913D12B473FF4855781C860DE27121FB
-:1057400026FC094A01F3611C6521D9759ABB85ECD9
-:105750004CA6F93B03808F5523E7FB2957838D39EE
-:105760001EC2F2C0C97E8A6FC6F955CD0A0B2860E9
-:10577000EF6923BF7114ED7CFB705BD45144CFF70C
-:10578000F0798F8863D90DDDE24FB8E3FC0197CF44
-:105790005AEF10FD39D998B67CCC53706B4604C6CD
-:1057A0007797B4D17CDCC3186B33ED033A98E97B6F
-:1057B000E8AF1003B026FBF1EBE2AFA9077F633A35
-:1057C0000388BF11368A6B51521FE1C31F59457EB2
-:1057D00026F71F63F86CE9443C6A0CFC3F3E3FF23D
-:1057E0001B99F01735D18536DC167059DB09BFE8F7
-:1057F00092F4E1F4C8AD11F45962A187C47F02BAF2
-:1058000058E821F1FB75E9124F8F78BC7FC7CEE3D2
-:105810006DF174B2E47764703F240A7EC8CBDB3745
-:1058200053BCE3CC53EF7D0BDB57FF52654EE8E7EB
-:10583000EC760F8BA2FC6A111DFDA9AA0E35619CA6
-:1058400057DAE5D5CF7968BCAA9D8EC84CF8BE6AF8
-:10585000D7FB4564372DEF3E3200E3024F299C7E93
-:10586000E1AE22DCB7ABD2B87F10DFDF063B8F0B97
-:105870009C7E31790EC61F946D3C5FB1AAFD26BB9C
-:10588000C3C46FFFCBCEF35EA11DC973F84985D6A3
-:105890009BDEF071BFE0F4930A876FB73D82798F8A
-:1058A00055DB36EA21F42BB77D4671ECD2E79EF149
-:1058B0007691BFA85AFDE76D2AD1139E44BF783F69
-:1058C000B6AEA396FC84BA76E127C6F951D5CFEDE2
-:1058D000DD1506D4543FFF8417E32FA73AB77AC9E2
-:1058E0003FDDC6FD4FCDAD25F64F2FE597B6DF9BCB
-:1058F000D02F3D85FF007F62BF3DCE9FDFD6EFF208
-:10590000F62F9FF9FC718C939EDEF9E9E30877CDC1
-:10591000FFFEE3E368DFB37D2E632BCCB7FEA93730
-:1059200029DE24BF7B5BC8E9D9412C9C03EDCEFE68
-:10593000CE41F92367F77E948BFEDCD91D7FCE44E0
-:10594000BF7EE9DEA95938EFA52F9466B104F22E87
-:105950009FC89791CB8813C6D3E160C741F243CE6D
-:105960001C7790DFD7135F68AFE5F11A9F882B6C27
-:105970004F1C8795FE705DC7FBE53C3E26FCE24B65
-:10598000C511DE003A5E7519F4DA2EE24471F43A7C
-:1059900083FF00BA7C1947AFCF59E86739B80FD9F0
-:1059A000D1AFCF3842F432F024E3BB47EC019B8EF9
-:1059B00072B033B9874E33914ECF7C9E8BF1F08F0E
-:1059C000EDDD64F774EF7518E8DF57EDFD2DC9C5FF
-:1059D000D9178E51FC948938EB59D6F3C7E3628A04
-:1059E00098DF160F8F3F087C637CC2E7A5F7220E75
-:1059F000C1F955C627FA8A4B4CD045DE93883BD770
-:105A00006E795B6771711E6522D2E93D4B7C5CCE7D
-:105A10003BBE3F03F130C11C5F4B1CF7917E738C82
-:105A20004E3CAE26E36767378AB81BBC1F3806FDBD
-:105A3000411EC7A88F28BF6509E450C6D7C6E871C4
-:105A40007218B9BCB8DAA5E0FD5BF1314CE7EB8325
-:105A5000C4CBE9BF24D6C3DFD4B95C4FB78566EAAF
-:105A6000A6FDECEF897D16892F09EF69918777FAFA
-:105A70002995E2412DED07499FC6CB735D1FE720B5
-:105A80006ED379BCB56EF7FE22D43BA70FBC487C21
-:105A900057B7FD3D3D0CFD1CD9F6BCCEED49CEE718
-:105AA000A8A723263D7DFAD9FD453CEEC7F36EE35A
-:105AB000FBAF16FDD7EFB1F65FBFFD334BFFD5E16E
-:105AC00076DAFFBAD438A7B4C04D38DF539D768656
-:105AD000FAEE54BB3A3D92C80ED4ED967DD0966353
-:105AE0003AAD57E35E4FA2FCDCA5C7A6BF9D82FB83
-:105AF00074206668FF763471BEEAF8716000D2A542
-:105B0000E3D82D2AAE1BBB108F263BB8F88D8652EA
-:105B10000FC86BF13BC171C856F17A60C2719B0529
-:105B20006E18270BF57133F483F9F4983F84FBA3C7
-:105B3000AAB77C3AC2A31A36C39570FDE4FDD9DD3D
-:105B4000418676B9DDB0E62B67CF1671B4A8356F04
-:105B50003D5B67C3711F9CD992FCB81FB064446061
-:105B6000F461CCAB5F904D71E29C6FF3EFCE18EE19
-:105B7000B0EDAAD8BE6DF205E81FF3606C91B57365
-:105B8000E1BB64AD5DC17D007832A4CB9DB6D0266B
-:105B90003D03DBE9CC07AAF1715DD128FF429C7B74
-:105BA00091FDC9767DED07CB7348AA807F88D80F19
-:105BB0001EC4BA14DC0FDEE0E1E79106BBD3E9BCFA
-:105BC000D16661B7F970DF15DB3558D7ED4B9E47CD
-:105BD0006AB596D34B4BEE18EC073F58BFAB540356
-:105BE0007D907E53C98E0106EE4BAF2BC5BCFBF4F6
-:105BF000274A46E740798EA3A88CEAFFB564742E45
-:105C000094BFDF3AA98CEAAB15CA0BDCAB77978659
-:105C1000DD31F9CC00E316F32D406E0FA0DC9E09B8
-:105C20009E6EC1DADA1BBED0F9791816C4F90F9A44
-:105C3000C8E73FD0FDCE0E9CEF605B5713F2DFCF7D
-:105C4000F67E998AED7CCCA0791AACD9C07D7978A2
-:105C500035F1AB8BE4FFC4E7C1487E7F2E39F41BDE
-:105C600084E3DEF9C31F2E479D5AE3273E8ADF27D0
-:105C700066463AD1A542D005E1749AF2902BF12400
-:105C800002E99B3203C751C235EA57577E7D784EF1
-:105C90004A7E11E7C04CE7A43E41381F490ED1337C
-:105CA000FE9CD4013DF829F253CEC20BB908BF3C8B
-:105CB000FF54BAC84D7181F37B58C491407EE473A0
-:105CC0005323CBD086F65DFFA623F4671C37FF571E
-:105CD000BE9D47A1BFAB2A743FA6AE5DB56C5C8686
-:105CE0003696F109A13D21E8968DB444F9BA8BF1BD
-:105CF00073390E25807EE3B9EF1BA47F0756CC24B1
-:105D0000FFE25C725E3BE64F9CBB9BE701C00AAFC3
-:105D1000A01C0CDA931245FF07F8F88B383EFEC240
-:105D2000BACE58C73DF7956F7717F56788FEC0D094
-:105D3000C944B9E17FE7546E679F6BF4111C60168C
-:105D4000EEC7F5F472C7CB7658CFE901DEFB3B4CCA
-:105D500078CF75F449BF3C07A71F3DE3E9B7D0D919
-:105D6000908B725C156C2F47D7F4A385771523535E
-:105D7000BFA987AEC0F635733A8FF09CA18602DCCE
-:105D800067EB4D5F7E1E2B73CFBC263BC62B903E30
-:105D9000BEDE74BC6A993F43EB67A1EB5884FFAA4F
-:105DA0003D9FD9107E49CF87459E7FFCF7FFE85085
-:105DB000C4B8354D768C93ECD6C99E8D6F371D0FC8
-:105DC000558D8F958B9CC5346E968DC73B7AB7E702
-:105DD000EB5FAC5F279DCBEA8B1F8B0CDE1FE0FFD8
-:105DE0001B66FC7FAB6FFCCFC276807F7A7E0DFC9A
-:105DF000DF84EDFBC2BFB4A3AB855EA8C67D14E013
-:105E0000A30F03B33387C2F8E5AA9BE460F156956C
-:105E1000E40FDACFCCC98CE991C5931AF6E37C176D
-:105E20003FA610BF568873A69F8ABCFEF87CA88543
-:105E300073C2B4BFD32B2F2A12E7D7C5E5BBD7C790
-:105E4000F87630CF53E3E7B6542117A58B0A53D029
-:105E50001EDA67F7FD2BD9D9AFA86C5302FC6F444B
-:105E60002633D1755083CD9227CB2A522DFD962D06
-:105E70002AA47DEF251EDF45FDAAC1CBACEB765EE3
-:105E8000D87ACE6848ABF59CD1B0B6FE96F657AC42
-:105E9000CFB7D48F888CB4D45FB96D8CA53CAAFDE4
-:105EA0006A4BFBAB764FB1944747BF61693FF6E859
-:105EB0006C4B797CE72D96F6138ECFB7D44FEAAAB8
-:105EC000B2D45FF3F1124BF91FBA7F68B5536C8CF3
-:105ED000F4234B52485F1E6A9C988BF9D86C9C52F5
-:105EE00086F82C15F98487EED06D86179F0536034A
-:105EF000F4D681053369DD3F744766C047CFE200C1
-:105F0000FA354C9D3C2E51BEE6546352AE392FAA51
-:105F1000D469B7E8B7A986B5BCCB21F6FD0673BE38
-:105F2000F9659C7CD91B2647C13264FD170FCDC291
-:105F3000F140CEF6093DB7EFB2F45C6643319641CD
-:105F4000CE0E25923326D6D912C14FF00CE8981FF9
-:105F500059E6A1F538802F7DF43EAC81BC4C71FA36
-:105F6000071EC679D9FCE9C88465738287787F6289
-:105F70005D66C36D5F675D96729E6D13F96B693CDC
-:105F80007FED91050529CC84DF3F386CC28E6EE32E
-:105F90004FE3A8AB276F35DFFCFEE324CD942FA79A
-:105FA0002C9A49F922D97DE8453D3B7FC616D0C7DA
-:105FB0007A8E8F9EF27DCB1C5BC23CB06EA147A552
-:105FC000BD3522666F75233DCE64BFFE10E629D530
-:105FD000CDED267B2BDBD676C7119CD7ABAA885F8D
-:105FE000FAF8F92A61272F98F1C01D47705FFA5F10
-:105FF00086917E92E36C689C3E43339D231FD88735
-:10600000DF74A593C3F378E3F0191594B76DF0F33B
-:10601000A2A2FFDC706D39DACD8345BEE943B6C478
-:10602000F92E6ED14F16921CE135DC24276716BE7F
-:10603000E3D5601E8FC2EAE5C47DDBAB3A8BB91DA8
-:1060400016F0E339D4DCE8AD0F61FBDC6C8DF25D5A
-:10605000E3C7CF9A1B6ACD83F935A7D9FC6E2A779F
-:106060002BD8DEF123C6FA41FBE6FFAD123CCD078B
-:106070002651FE87C3DDC0703F55CEEB60DAA384A6
-:106080001FB52399D64126F6C565BCF5F3EC8A4EBB
-:10609000B4373E5F67A7F13E87391AD0FFE71D2A64
-:1060A000EDBB1E494B8ADAA0ACB67A68FDCE45DB63
-:1060B00013DA2FECF0447C7931BC68EB27D37918E4
-:1060C000C7403EFFE63477C49D47F34EC7794B384F
-:1060D000E5BC07F5E1679608B873AEE839A7C1904B
-:1060E0008F5543A37E17A4F2739891C689825ED61A
-:1060F000F9B464CFBEFE663C3FF486CA3035C4D7DF
-:10610000D546F35F08F3C7786F3C7ECFF8F2BEB098
-:10611000A9046709C2A9AE2FA779503BF8AEF6676C
-:106120000A7B340FF930349DE8DADF46E7027BD989
-:10613000074E2E5F339C3C2F57CF2E98B1A51F3EA4
-:1061400087925C7CD3D9E7BA1F74727D44CFAF715C
-:10615000BF00ADFF521FA9019BB073B95EEAB19FAA
-:10616000F4D0779D19B1B29AF2A322ECB76FFB6C11
-:10617000C77E1DED333723FB59EACDBEEC33B4CBDC
-:1061800090DFA45DB6386E9E30BF1A31BF9A44F3DB
-:10619000EBA56F6F699076CD12E745ECCA0C3DB167
-:1061A0003E7A52D0A1DED019C59B688D02BDB3D80E
-:1061B00046E78D99167199CF976F704ABB6ECF7E67
-:1061C0001DF10CF3463C6783FF5C4E7AC79E302F6F
-:1061D000FC52FE48FEEAC29D47B13FB07311FAF38C
-:1061E0006DBE94B48BD817F665AFBACC787DC02954
-:1061F000F2B963787C50E0F1C184784C073CDA2C2A
-:10620000F6E1AE021FE1F1A7CE8BD88767BEFD6E27
-:1062100031AE476705BEEA7AFC5CAE9FFBC32285C0
-:10622000F1AA5ACC5F76F232EE07ADC0263998DF7C
-:106230001C7C02FBAFDF6D3D77F863278F9331370E
-:106240003F372BFBCB14FA1EFCEA7FFCD0477AFFCA
-:106250009F703E31FFBAAB18FDAB152F5C91827673
-:1062600059D9AE9B0D7C9E4F1F4AEBD9995D8E008C
-:10627000C279268DE7EB9DD935E108C61F3E6D3CFE
-:106280009A6FD6F7679E3D566C877ECEEC3C56AC37
-:10629000517E70C46217D67EF59B623C8725F3AAB7
-:1062A0007BF8C5C9D789752E1ED7C8C8D45B305FA7
-:1062B000FC42522AE1EBC14CDBFD89E235A83E6984
-:1062C000DFDEA3D33EE59211BE156E8CD7E41994A0
-:1062D00087BB4209E42CC07D96594E3FEE03A4E7EC
-:1062E000B3E1792988C21073033E1D87DAE8B869E3
-:1062F00052A7B11FCD2319C7D14AB9BEEDBE41A7E0
-:10630000BCB164CDF7F05C2867CFD168BD93711D37
-:1063100047323F972CE33A3DF0BC62A77568495E6F
-:10632000A8AD04BE5B32298DBEF3CE7A8BF8E59C16
-:10633000CF16B6E37CB46E8AEFFCA47178C650C069
-:10634000A391639B4136CD5F005BA6FC7FAFC6C2C5
-:106350002960DFAC06FE1F0AFCDFD1E8A4F62D6041
-:106360001F1A69744F42EC9E0F93DCEC6C34A8DD6D
-:10637000CF1BB3E9BB071A7DF4ECB12318FF8ECA1B
-:1063800009F4EB7FD6F3BE467E9F882CFF711CD8A4
-:106390006940EFF4094055C04BBA387F2EEB1F6DB2
-:1063A0007C6548D950810CC067FF1A63E3AA8BC093
-:1063B0009BEE88A4E211E32B5D2C5C3611F3FCBA52
-:1063C000EF2F4FC5F311F794958D003CE2FEF6D503
-:1063D000402AD703CD783E35A7C6D78471BF9CDD50
-:1063E0004A3BAE5F39BBD796E03E02B4A37383B29B
-:1063F000DF0C17D773C9071F51F247E1E602DF9799
-:10640000677B932389CE978E73713DE777F1FDC14A
-:10641000D5625FBD7B969BF462F24117F14BCE9E35
-:106420002B697FCFDDC7BE727C3FC907FF4C71600F
-:10643000B7D2B61FF729D9026E7F4A7EEAEB3B6CD2
-:10644000AF5F46FB737E8DE2C260F6D2FCCECC1A03
-:1064500048F8C6F6663D7E4E4F6C9705049E56DAA8
-:1064600013C7E935C6C719D7D94DFB99786F13E221
-:106470003BE78D3605FDF5330ACFC7E80FF8D8099D
-:10648000E59CC96D74AFD373CE50B90BBEFB93714D
-:10649000BC602580E32AFC7D2E7E27F1A116E94E03
-:1064A000D427397BDEE3E77C6C5D3AE6BF2DBAF793
-:1064B000798A3FAA7A308F9757AEC4F8648637B886
-:1064C00011F984859F2F3B047CF2A038B78C6F5064
-:1064D000EFAD768972B8BD39007CB2DACECB8BEEE7
-:1064E0007D8EF866B53DB818CF3D63B919FA5F9D4A
-:1064F000DA9E6D83B2BBE999E6A383B02CDB3FD370
-:106500001C9E0C76A84BEAE7600EE2BDA76C4079B2
-:1065100094A9ACF13273F2A79C5FEDC13F1F190043
-:10652000FC52B787DF73D383B7DD6B155C8F7EDEDC
-:1065300078D4D7AC093991FA03D6F92BB219F929D5
-:106540007A4489E42B78DF476BA6395FE5BBC98ABB
-:10655000885BC0F7E6F863DCB9363A2A83EB73331D
-:10656000CF0B89A7EB9B49256D4919781E35B44A95
-:10657000453DF88CDDA0BCFA2E8DF4F6699957DF05
-:1065800060277BB0469C73B52F0FAD1A817271AB3B
-:10659000E6C7F842755E5B09DA43D52FE6F99B58EA
-:1065A0002C4FB73AB53D738C3B96A72BCB2B445C55
-:1065B0002A2BB52135B510F763D6E6E27E491D6B6F
-:1065C000BBED8708EF6B2A437EFF64FFA414BC7702
-:1065D000A816CA1807ABED38A687A0DDD549FCBEC2
-:1065E0009BBA0EE01B37BF872650C0D846CD484225
-:1065F0003DFFF340C348348937BB7E5DE6FA07C6EA
-:106600009EC80F1848E75FDD7BBCD98965DD18C1DE
-:106610004663F9DF9A91CFAA47DB28CF9285FFED39
-:106620005060A8D8EF8572AB6BD05473DC3B479CAD
-:1066300033ACDFE0A6F360B02E6F42FEAE5B6F0BB3
-:10664000E3FE99CDD949E7807EE562823ED6F353D9
-:10665000EB14AE0FC30B783C75E98CB46FD0F9A97D
-:1066600095F946F82271DDCA0B49744E4A96AF4E31
-:10667000F251FF955A98F6912A2F78E97CD5DF6F71
-:106680003CA7E5BC56EFF1DC048F1CAF26361ED1CB
-:10669000F5E098571F1A0A745BBAC36E7398F86EC8
-:1066A000E90EB13FEF0A64613F193AC733437F10E7
-:1066B000788DEEB8E1E5B0960DFA5FCA77F87C7395
-:1066C000D964A45BAC9E59E53F80FEF87D49B2FCDD
-:1066D0001FCD650313B44F8A6B9F2FFB575762FF83
-:1066E000F1F06424C5CA4E68AFFDD5D15346F8D643
-:1066F000DAE2FA4B9365F74A1C5FF255EBBDE98786
-:10670000C3C057F7A5B695A0FEEF5EC07C788F1684
-:10671000F2ABDFA46F5B5D5CAE2B2FE45BE81DC3C7
-:106720007B81852E1F35665BF63D17CD5D4AFBB339
-:10673000AD2E412F16E6E76C360C6011533CE8FF96
-:10674000C3F1B7C271751F70FCE37F311C3ECB787B
-:106750003138865AE0FB5BE1D87463C137F2A0C9D7
-:10676000834AD8998FEBC28F795E9C9A5AE66BC2A6
-:106770007D991F6B14D71FC678BE4BBEC68E6A6349
-:10678000507EDA02180761CBB9BD02EF5BED63689A
-:106790001D227F61C81EC73CCCDBC8AF0C2CC627AE
-:1067A0001B5848FB3E729F948938A1DCE71966B0FC
-:1067B00012BCF7EF44D23C5AA7F28373AB31AEAEB2
-:1067C0007AC625E17AF8A02D12C6F1C20FF0F13297
-:1067D0006C917627DA4BDEA106AE77195EAEFFD854
-:1067E000AA425AFF36D9F247DE0170AC544A925E93
-:1067F000413CA7E6537C1CDFE33D3B9BC4BAA5A606
-:10680000FA0D5CA73689756B85D0EFF27D725A70F0
-:106810001EDA113F59356DAA7312EAA1406B3F5839
-:106820006FEE5F356D65F6245C6F7CF94E585FEE58
-:106830004F9AB6D20993D9D4E4EB6FA4C6CAC3FE6B
-:106840000AAB35E989692B03A0779ADD4BAAD0CE34
-:1068500081FAC3E8273E9126F50EAFCF977A0AF565
-:1068600012E831B5A9A71C46BD94DFA377A691DE37
-:10687000D9F2B84AE5A5301EDA31308F30DE0FD6B6
-:106880003D4C23FFC805B02441D935229FF6CF6087
-:10689000DE2C09FDFF11BC5EEE77E8C36CB4DF812E
-:1068A000ED118FAE1CDE5E9FC5CF4BEB1E37F96D31
-:1068B00072FF4415FB7749224F453166911FEC5C0E
-:1068C000336609FA51CEA1D6FD693D2E9F458DCF85
-:1068D0006F7147C9EE6A4B12F1EB7E2C9BEE4D10A7
-:1068E000EFC1521E83CFCC9B9B4BE83E3D0F333014
-:1068F0009F3A3B1465667B493E1DB08EFA4C72E3AD
-:1069000070B340A27C8A85C9DC1E765FD0B89FA890
-:10691000807D83EBA847D8E1C23EB2CB7B8EE2D626
-:106920005D692FD9C57D7A4B674CC9C27349AA3BB3
-:10693000E0443B67BF3186F66954E6BFBEC464EFEE
-:10694000344767507C5233020CED9C57859DA31A47
-:106950007E66B6735A1AC10187B56A737101DD5F2D
-:10696000F3A82BEA1C82F47DD0E647BD71704C552C
-:1069700058C1F8E4324672BAB938730AEE336CD4AF
-:106980008229B7A2BCBC01E3F938DDF83EF70A055D
-:10699000E3E99F3B8329A80FEE4B65163FEAFA64B3
-:1069A000EE8F6C4DE2FA47FA092D004F14E0D02E1D
-:1069B0008CA4FB7C460BBB549F5B46F1324C03C25C
-:1069C000F8A78335840D77ECBE3A47B6CD92FFA881
-:1069D0005D28A278E2D6243E8E1CF71E71DFA02C23
-:1069E0003B59038F1B038F27F2DF6A059C0EB0878C
-:1069F0007C649FC4EDFFF7B68FC85E91F4E9B15394
-:106A0000147E2EB42FFBA8FE82CDA26763E7D97552
-:106A1000D2CB67C57D01320FC42DF4594B76A8ED5A
-:106A20009ABCD8FD009AC8075923EE0560D95AB719
-:106A3000F91C7E32C663A0BE59E48524C79DEB775E
-:106A4000B99792BFE01AAE59CE81395988BE73F812
-:106A5000ACEFB5ECF8FB02C23D796094B7A8B14742
-:106A600014BA1C80DBBB03441ED699E47729DE08E8
-:106A7000F6EE4127ED4BF073A2321EF675EDE357AB
-:106A8000D1AE22BF70FA68EC7711AE4718CF66C15D
-:106A90001CBEE9D8CE286F28C9DFC5F89D63646F96
-:106AA000A952CF859F6F463F2AC36CDF99ECB52B67
-:106AB000573FDFDC5C487E079517DDDB467A70A523
-:106AC0004B96575319D6AB28FA3D6C97C387FC04F5
-:106AD000DF07506ED88D05642FABF9E0D202DC657C
-:106AE00078FF21EE0FEC726C427B16FCDAF92E5324
-:106AF0009CEC8CE7782E2B4CD85FD8D25FEED7EB8E
-:106B00000FC6EFC03C23595FE65D1F55F9773EFC89
-:106B10008E0DEC7C370CFD3FF88283EE2591F72C2F
-:106B2000C7F3EB9464EEBFA3DE30E773EA732B0286
-:106B3000C89C523E1DD949963C7029AFDA85E124A4
-:106B40009FF2BB5793F8FEB1A60528AEA65D282498
-:106B5000F9DF2AE8DAD2685C629CB43EC61943FDCC
-:106B6000F43D4EB1D0134CEC8F6986F91E99BEE40A
-:106B7000357E3F305EBFC9A7D46FFB44FFF392ADB3
-:106B8000F1E5AAF5ED4790857E680B55248FC7BCCB
-:106B9000AF77BCB814D7D8A245286F77F67E5F8749
-:106BA00093FBBE8813146CBBE300B26B4372684363
-:106BB0001294AB92C53E4036AC6B2AAE5B3C6FE99B
-:106BC00011ACC7FC8690EFE1A9A8A7669553FCFA23
-:106BD000B9E4E06FF0BB7B671753AC40C2BDBA911C
-:106BE000E7DB497DE9467C417B87D6C0E39EEE40EA
-:106BF00014ED8B0792DF9CAA211F6A5C0E96AD3EB6
-:106C0000B012E3224ECD4F7CE574DB7CB8BE3BC1B5
-:106C1000BFC375AFC96DA378D20ABC07380FCF1BAD
-:106C2000CC34505E9778F2B3D845F4A3762153E87C
-:106C30005FEBBD3A7FFF71D2E9FB5EF7F71C9C1456
-:106C4000C5FE343FA3FC1944C2FB26BD2AD7F5F884
-:106C5000EFE2FB97F894F8756821C2AB8E76430299
-:106C6000B89E4CB6EEDB6649FD99FA564114DED665
-:106C70002A5D5EB44F402F3E897C5237AAFBD78AEB
-:106C80008FF46926B767C2F2BE02CBFD48322EAF41
-:106C9000BAB95D23E15FF2CA834EF3BE533CBCF147
-:106CA000EBA5BBD09A9FE11C9814775F70131F4728
-:106CB0000B12DFD827079C28274DC61803ED9566D1
-:106CC000CDF7DB00E595D8C96E063BDC32BE7CDE35
-:106CD00027EE073E26ECA8F87A8FB84F39FEFD67FD
-:106CE000C27EB86FFFCDA487FBA21F1EA846FA7A0A
-:106CF000F29981E773EC025EEF25FAED8B8FEEDF00
-:106D0000CFE3BADA4467045DACF8F1547B3080E736
-:106D1000C9D4D18CEC5D75101F1F6869605CD83BCD
-:106D20002E8D0D37ADB3F70E9DCDEF77CE30E87CCD
-:106D30009FEAB10513D999124F8792E53D159C6FD3
-:106D4000B225DF0CFB3DDD836EE29BEE447C7328B5
-:106D500099EB2B84C34CCF7B87E66725A24F4C2F42
-:106D600072BEBA145F7488FB126B1137E0DFD488EF
-:106D7000F3F6A7C53D41F393C57D4106B78BE5FD0D
-:106D8000171D5A2019EDAAF93DFBD4013A9752E399
-:106D90000AA44C42BE3CC6EDDE8F4AF8BD651FD941
-:106DA000032988E78F8EA94A13EDF3F3BC40996756
-:106DB000F591DDB77A24D4DFFE5335D044D5567B28
-:106DC000EE340B8CFD17B46F77ABB47F94F7C03CF7
-:106DD0007514B4AF00430FF9687EA93B8CEB6FC705
-:106DE000EF1BDE453D74FBE30EDF7218E7D0FAB10E
-:106DF0005F60F9E41A8FCF4171B27C05EF155FBA7D
-:106E000036CFA0FDA3654CD81943CB4B8732F6147F
-:106E1000FE53C69D9D74CFB8A80FB694C1FC4666BC
-:106E200074D8DC0053C41D6CC1734E2B9B82D9E80F
-:106E3000FF5DBFA6A005E38F999981CE6B411FAF7F
-:106E40005833BC1CFDC18E47457FE1112DE8EFFD95
-:106E5000D216CA53A0FEA93553CA292F7788ECFF52
-:106E600046AA9FFFB32BBE386E204E2BCB31665601
-:106E70003C57C2535B5E0ABA7DC164595EA2633956
-:106E80003D9959E260F6983F4971B68E1EFFF1AE0A
-:106E9000728C83DD3EA5A15483FEF33C3F6A290436
-:106EA000D198D0566204F0CA5CCF03E5C919786B5B
-:106EB0005EA01AD793919E75E5389FF47ED6FED3D7
-:106EC00055114F65EB5BB0BF1EF8C2DB5A30BE2ACE
-:106ED000DBBF7EDF5B2DE18131BEFF56EC7EA56F0F
-:106EE000BA33E8DEBA231862CB5DD6ADF37C5E918F
-:106EF0007F33B0AB88E71589F2F02E9E772DCBD982
-:106F0000BCDCB13CF13AFF132F97B78EA4C4F53F18
-:106F100076737D0170939E4F39CE02DB13C8518585
-:106F2000DB4DED0E839DE74C8BC9D3F50EC6266273
-:106F30007E9393C329FB89FFFE6E310E0B5F9F8604
-:106F40007C3C53F0F910BFC2F394762747F0F71852
-:106F5000C0CBD2BE0DF3D926E211DB5CEC7BB36073
-:106F6000E8CC2416C27B7332FA41B990BE0FEC70A4
-:106F7000C7FA7B8D8B309B3A24B805FB9B9A9533DF
-:106F80007A455EAC1F80BBD939C602B736310DEBEE
-:106F9000C3FD314ED283CF423E0FE013C2170CF334
-:106FA00034FE7E4047E7C87CD4BF2331E9C6A4E75E
-:106FB0008B3B67D3799AA55EB13FE2E3DF6794F23A
-:106FC000BC97EE1793F9FD99CECE02F37ED6C36E31
-:106FD000916770CFCC87E91C74A79DD1F9851D25D9
-:106FE00017CD3BACC1B89CC96EACD1A2E48FD560C3
-:106FF0005C6E2CF6F71A9D3FC47E7C22FE8C71B528
-:107000008C1589E92FD7C19A0B060BF7EBAD2F63CF
-:10701000FDA7B3F0D84BCF2BD69FD56FECDD9F2EBD
-:10702000E2F802EF9AC0BB9E18CE7D924F01DF3688
-:10703000137F2D10FC26F703CFEE1AB1C9BCFF2A2F
-:10704000CF0D817E7E1A7F1F21DC9944FE4AB11646
-:10705000B80EDB1777A6D1FE80E40FC91792AE1DDC
-:10706000690D146FE97E44A1735CF1701D9670ADDB
-:10707000E7F7F665CD0DA9E67BC6A53C40FF1DA24E
-:10708000FF7113497E1EE3F20072732BCA2FDEC319
-:1070900082F3F07715997F8F40C25F84BC389EE8F9
-:1070A000C8F1FF824BE4AF70BCF5C67FFF4BD03315
-:1070B00097E859DC7980E659D387DC5679BD3C8F57
-:1070C000ED78D4EB83766304FF77B4BF4FF78A750E
-:1070D000EC5699E2E3F346BD55DCA38FC7BF3C05F0
-:1070E000F471564F19F4A50FE9D0A33FA34E67AC36
-:1070F000FD77BDE3A735A3BE14F7F6A6AB7834370A
-:1071000006C79FDCDCBE9A184A1CC76AF07A2C7A44
-:10711000EC916553D8FB30FFABDD3CFF6A625798BA
-:107120007E5747CA75BC9EEAE7E174343CFF97F48A
-:1071300094EB127ACA25F5147F7F186DDE31B8BE44
-:10714000761529603757D80299E87F7D70EC8774EF
-:107150003E6591C8CF1985F939B86E1E0FD2BAF2C3
-:107160000956F23C9D819E0CCCD7B6E6E9B02DFCC9
-:107170005C6B3C5FC5F8282CEC370187580FAE7765
-:10718000743DCBE3195679966580B3CE36C454EF7F
-:10719000E6EB96A403D0BB99EE3916727C6257D603
-:1071A00046D4B7AF7B789E4DFA90C0689CBF944B95
-:1071B0005857059FD8BE37DBCDF5C6EC04FC3BD94C
-:1071C000C3F5EC82F59C6F3AFEBDF43AC47BC7EB85
-:1071D00069A9CB4D7AA24CC8B1EC57EA21F99DAC14
-:1071E0009F22FA9BE6E17251E6E67C877024CA276B
-:1071F0002833ADAFC43FAD9C7F60BE61337FBF2EEF
-:10720000FA8DE153ACAB02CFB53AE017F0B7CD1E23
-:10721000EE8FF949C59D36EAAF62B787F2322BDAB5
-:10722000391E2BDAF6DBAA4DF889EF6FA987CBD18F
-:1072300046710FED611BF01BE2DDCDE13BBB2B87FF
-:10724000F4E7220FB71B2EBD6E5C9E9ED928F2314B
-:1072500080BE94BF58FBD2808D563DCDFB4BEF17BF
-:107260005A81E7F0D21F667ECC29033C45F1DCFF52
-:10727000171EA177F4808EE76DBB1F61B41F3F6CB2
-:107280006E60B40FCAF541F71805FA2B68E37AB8B7
-:10729000781DD83128774EB92EBCB2DD3CDEDD1E1C
-:1072A0008FE51C61C57A8EBF6160FF3C8D4FE8E7BA
-:1072B00059B2E3393C271E6ABF06E34EF2FB564142
-:1072C000FF4BC1578CF08D8BC187FD53FE8A3BB8B5
-:1072D0001CFBADFBCDCE01E67E1FECE977FE14175B
-:1072E000EAF9B5B0EE9074860EE2B98B8A3DA90634
-:1072F000DE9300F26C437F478E5BA1C9DFCBE92AA6
-:10730000C67BC20B7AC69174FDDD33E6F96FF6B821
-:10731000FFAEF4EDD043349FEE1D00AF2F86978E65
-:10732000F679CB5DB84E1C677E5C2724BCC3E6763D
-:1073300079315FA45EAC1F305F1BFA2FE93FF5B1D6
-:107340001588B7CE29744F423C5F4B3A0D675C7E7F
-:10735000A49F361C03FC50DEE32912FA87919F7B21
-:10736000E2A5BD4FF37B2D385DEAE7723A767942AC
-:107370005F7832627208FA9CEE2FAE58D7A38FDA8C
-:10738000F9FBCEDCB980CF5F7BA49C5BE9921E6CDD
-:1073900077D125B382AFCFBC382AB28AD399C6EF52
-:1073A00068F7441405CFD13634A1BF2DF504C2636C
-:1073B000CE5792F0F4D091011D47C5DE0F9BCBFB59
-:1073C000AB0779473EAA511B941C85F400C557B3FF
-:1073D000500F4039AB9DB7637BF8FD0D124F353729
-:1073E00041A7E077FE9BA790E621F19535376AAB80
-:1073F00029C47CE503833F30D1F9A8D82F40BCCC09
-:10740000267F83EBEB1A353810FD5696E5A073A85E
-:10741000B00E917E39EC629A0BFA7B199EB82E4D14
-:1074200055EFA0734253872824C7A00164BC877E10
-:107430008FEBFA6B9379DED65FBE3F14E79991CC60
-:10744000F910FA718A7E9CB40E8AF5E05F73C1AEC2
-:1074500053627AF9B0A2503F87FFE1CA4D2B9418CE
-:107460005F627F683F1D56660DA4F5B22343240773
-:107470007559F2C97AAF675DB9586FF617D1BF8BEE
-:10748000F99BCA3DD380A7264C6F8FE295D34D61FF
-:1074900075DA3FC1B853C1DF74A1FEF472BE3E9CE1
-:1074A0001756BD08D73085EE573E92142AE4F7F4FC
-:1074B000F2713245DC2653E42BA3BD80CF8897EBD5
-:1074C000FF9129FCF903F1CCF4268EF3AC13F5F50A
-:1074D000E25EEB552589F3D9067A154BBCE57AB106
-:1074E0006F81F7FF7AB9DF29F26CF93E07D8F7848C
-:1074F000DFD27BE6D2BEDDE79D37A4F0FB1BB83EB2
-:10750000F85009FCFA26059F41BA3F2FFCA64AF91C
-:10751000EF1F18012FE637D52625CEC32E11F3AB6A
-:1075200015F3FFA891DFB7B000F7D3407F8CF5F2D9
-:10753000792C6AFB7639D27BD13A85F6D3E4BEBD8D
-:10754000A46FE506D5124F5F80FB69FDFE163FCAAA
-:10755000DF871F35CEE247C971E3FDA9138DD996A8
-:10756000B8FFFCB621E29E0BDEFE76E627B86F6F11
-:107570001D60D9FF63AD1997770F28F84FE184F0AC
-:10758000E9A46FE5FB138D4E1636C3F1F150CA7BAB
-:1075900018E80DDD8CF48DC191CCC26638D864FE3C
-:1075A000BB572E1E77053B9CFB2FF0DCE8263B9D4E
-:1075B000EEA9ED898381FE3052501F95CCF38E8F5A
-:1075C000F90D52BE6A2627F61FC6093F779C9BFB22
-:1075D000C729C7A53F9DE443BD28EDF1F8EF1A7A0E
-:1075E000F8D66A4F5E2AFE00FC1B36FB47F1FDB65B
-:1075F000887EBF3EBFE4F7C12F05FF257E77F1E40B
-:1076000010C5F7F0F221CC45995066F5831EF5F2CE
-:10761000F5FC516F327D2FEDEA8AB9D6768F63BBC8
-:10762000F1F84CBEAC788ED97E5786A0FEE3FDC93A
-:10763000DFDDC93BF53AE57FFE0EFD44E8EF584A31
-:10764000602BF2C71A912FBFF1AF07B36F477BE8EA
-:107650005FECB45F5FF2D8D21598CFEC6E570C3A5E
-:107660007FB4DB2A0FDF5CD63EB802F0D12EE8549F
-:10767000E3E7F3A8F147F5A16ECCAFE6E30F6CDFCB
-:10768000AF68267E1B58C9DBBDE4B55BE233FBB0B7
-:107690000CFDECF11AD26FD93F231DDB0734B40384
-:1076A000FAE3EFDD003CFD1B18D9D1FDC729D4FF5B
-:1076B00037C76D54F0F7B7E43C5B6DB30A0DF8AE15
-:1076C0003533D98FEBCD00237408E5ABE69D681404
-:1076D00097C709EF746AE85F8D320287F1BD9C9706
-:1076E0004F35FAA3DD9EFC0E87AFAD27AEC4D71B86
-:1076F000C6560B3B7413B7C7547694717B9CD6F572
-:10770000CCE5C369DD93F3C94C13EB46260B61FE50
-:1077100031B46F253BC5C9D7FDCCE5FCF7F2243D5C
-:10772000637EE68831E8670E5913D5E6C3772F6D7F
-:10773000B025BC5FE37D817798C7BBE6795C4A5F83
-:10774000C976F63EE28C92DF93A727F6DF19BB9F3E
-:10775000EA4B1E4BBF85E4B259A7FB1025FE471923
-:10776000C1CF109EFEED1B15C4CD0991577062D597
-:10777000D30ADA91DF5FCC0C35013FF5C8EBB29D3F
-:10778000832B4C7A13FA277A6C8CCB1397F116570C
-:107790000AF77FE61B4196329EF276C97F5EBC8572
-:1077A000FFEE469FF8B84C7C2995DC2EAF99C37F3D
-:1077B00077B4E4318DE85DDDCC7F77B066FB0E3ABF
-:1077C00067C77EC4FC28EF35ED3B940A18B77AFBF7
-:1077D0000E6581097F036A22945F7D8547EE3B44F5
-:1077E000C96E8EE76B8C17A09D72C4C5E5FD7489C8
-:1077F0003B8CFB10A7EDA11A6C773A27D98FFB942D
-:1078000012DF2FEF9846F71D78763AA2F86CB56D27
-:10781000CA7642BBD691BA1FF96894111A86784984
-:10782000D3821DF87D6ABAC78FFB183E071B43EB56
-:10783000F565E261421C3F4CF81197939B52BC42A4
-:107840002E18E53D5D9BE291F613E9A723763E8F66
-:107850009D8CC31BF106C6A5201F1EE5BF9BD0BF94
-:1078600026AA60BE48FCB8317E0A5C8DF05F3E9C63
-:10787000ED3AEAF56AA1674A1EDBA2BC6F827B067D
-:107880001A55C89FDB372A1827837AD233D09E61D6
-:107890005E52FFEDDC2FAD86FA0526BD22E7914052
-:1078A000BF04713EEE773A0F71FD12E5FB0202DE76
-:1078B000787ACE4DF1D1F8E5601ED07B3D3C1CFDC1
-:1078C000E223F949D49F94F778F99C2BF8BCFF8602
-:1078D0002D8ACD4DFB2764474AF864BB6329534288
-:1078E00088AF09D33B090FB51B349ACF543D38F408
-:1078F0000E933CD4A5703BEEC04DEFD2FD3FEB7E26
-:10790000718CF8B116FC69F227DA8EE937E0BA1209
-:107910007E52C5FDAEEBB849C21E12F7625DD7C1FB
-:10792000F56F6DC70E0DEF91947C9A77EA00DDA795
-:1079300055DBEE60E84701FF2D45FCC4F3A9C48F79
-:10794000D4AF7DD113F410F793C2BA88E785F2D093
-:10795000CF91FA3922EC51E6E6EFD78A79C5F827BC
-:10796000D49262D1AF2E928BBC53630E605E66AD33
-:107970005FA1F392E9A5E277C84C7099FDBE78FD4E
-:107980008871C320F7E373679BCEA9F5E879F1FD11
-:107990003AA4377F1FE5EF593EAED712FE78FA457D
-:1079A00053B85E4FC0678FE13CE2D731B9AEE73DD7
-:1079B000BE53C3FB9224FF5C877437F1CFF6147E6D
-:1079C000EFEEF6148DFA7FA884EF3B3E64E7EBD729
-:1079D000434D4ECAA37CF9669ED7E5B9458FE2F3C5
-:1079E000B06D7E0DD61FEECFE168B52DA773772061
-:1079F00097CF205D0FDCE4655C3F727DB8EE79AE19
-:107A0000CF6AC26EF2736B42DFA9A07CD774979FD6
-:107A1000EE010D1DD26FF0F4E62BDFCEFDF4FBC7B7
-:107A2000D7B573F99374007D4AFC25E541E23586AC
-:107A30004F8E77294F921E11B9CF03FCC2ED23EE72
-:107A400057158A739195CEC011BB0FFD161E7F2D61
-:107A500014E72365FC75BEA04B912DF81ACEB357E1
-:107A6000FCF532FD83EA65AF8EC0DF0FABCA3E4A3C
-:107A70004F29B7E0BF5AE4FB6D41F703C25F3C21D9
-:107A8000F444F5B87692CBEA0F1A489EDDD3B95E7E
-:107A900073BF63D5C78CDD27E6BB86BE9B9ADC5ED1
-:107AA0008EFBC7537FA618E8D7F705E7223C2F8641
-:107AB0007EDE8683DE79885FF13B52F25CCD1F85E6
-:107AC000DE39BD4D15BFABD9A05FCCFEBE547F2CB7
-:107AD000FA8642F79A08DFF0F4F6D2491FA27FBA7D
-:107AE0002D857EE7E4D3EDDFFEC187E9F83B22D7A1
-:107AF000FAD14E485F1124FEE9CE70F937F178ECE7
-:107B0000748C5735B51FF4E2399C4F9EBE6A0CEA5F
-:107B1000ED2483CBFDA9E7D5658897FF0324F17B8E
-:107B20003E008000000000001F8B080000000000E5
-:107B3000000BD57D097854D5D9F0B973670B9949F5
-:107B400066924C36B24C02045412262161916D9219
-:107B50001016599CB014906D640901421220ED87F3
-:107B6000D57E190CA5C823355A1770EB049762B55A
-:107B70003568B441830E0808553F47848A15EC8860
-:107B80001441423245DBE25F5AFFF3BEE79CCCDC96
-:107B90003B1350BFDAE7FFC3E3733CF7DC7B96F798
-:107BA000BCFBFB9E3377FEEAF9B1A38A0959ED9538
-:107BB000120D8490CE5DBFFC577A1221D54FD65955
-:107BC000245A6F7AF6757DC04488C6DBC29EEF8A60
-:107BD000B7C07BE79FB8772C194CDB5B9BB0FDF3FC
-:107BE000275AB0BEFF57CFBFF67FE87B35AE3807C8
-:107BF000BCF7F98BFBF4F0BCC6AD75B6D292B80FEA
-:107C0000E8679B69E9794626C9844C21ECEFC1DD20
-:107C1000FBF4F67C5A6FA5A3D2EFC95CBD77400E8A
-:107C2000FDAE75B776A909DEF0125242C7FDD5E266
-:107C3000916EA8B7DB08490B3DDFA2271E63022D1A
-:107C4000FB101243CB0BA5268F144FD75566DA02D3
-:107C5000E585DFC4CCF5D2EF6AF5813C2BCC6730EB
-:107C600071423DD5A2C1EF6B5AD7EA6A4DF83DF695
-:107C7000F3071D2150E6130F393B88AE9F9027BFB5
-:107C80001E0AE3FD96101BBE3722A68890390B3ED4
-:107C900091603EB183EB75AB719ECFB276BAEAF0DC
-:107CA000F6610D743C3AEED7F0372E5416594C3825
-:107CB0003E05087E97DE56996187F527191CB07E30
-:107CC000B1BEF46A7793993EBFA9C1ED90ED84BC33
-:107CD00072EEE884BEB4FEAB41D250195E97A5C5E2
-:107CE0002EDA7FADC784E3ACD950463EA5F31D0F15
-:107CF000BB48BF4FB690A41BE97A2AB424C9042517
-:107D000021C77445D0FF53D86E371027A178607F04
-:107D10007DCE531BE9270FEADC6925D0CF16BFDEE5
-:107D20000EE5936CFEF47B8BA908FBB3DC08DF1B2C
-:107D3000C93AF8AE7BE3D4A4AD12F6EBD72584E6BE
-:107D40004D48306B763EEBAF18E034C93317DE2771
-:107D5000763DAEEF737805F7D153B0301FCA6D6C26
-:107D6000BE1AE2067C49D6D312E1EACEA9A478B3C2
-:107D7000C452BAD052122A93FBB076355C5B78FBC2
-:107D800027162796645722212323DF13A580FFFEA1
-:107D9000395DFA001DF7FE573F41BCAD05BC85F1CA
-:107DA000DD67F4B00E81B7CBE013BA0F0FEEF90424
-:107DB000F17659BB84F0A96D2FD52FA5E58546270F
-:107DC000F9544BEB1CFF1E94025580D79E3D319613
-:107DD000A7289CBA047E367F7256A6CF73DBD3ECFD
-:107DE000123CDFC3F0F4A046E301381DDC79434BBD
-:107DF00093143ECF8D081FA99A209DD4D613AF812E
-:107E0000B6973ED6707432ADAFA9260E039D57AD1E
-:107E10000A8F721E3FBD19F0C55A438A63ECB0CE7B
-:107E20008F27F4A5FDD7D69012A0D3F4F1CE3D5004
-:107E300027ED121900F56AD73218FFA6A4950E99FE
-:107E4000F66F1DEF6A83F16E4A1AE390697F0F6641
-:107E5000B66E36D2764F05B13C0570D0359769695C
-:107E6000FDC10ABB854292C2EDC954682783F48ED6
-:107E7000A7008FDDCB6AA0BFDAD4F90EC09308FA51
-:107E8000DFB37110CCB7D6DEC71143DF9FD22E21EE
-:107E90005E118F89C0FC6B297CA13EC53BCA0BF3E8
-:107EA000B9C8E127E0D8A5F32F82F975BD64201E7B
-:107EB000DA3E653CC357EBF856E41F6FEE997858ED
-:107EC0002A08E1A5F965830FEA095A8BE400BE444C
-:107ED000661A603E4BF97C9A7564B18B7E679DC4CF
-:107EE000FAE977B784FCE259A0271B941A5EEA39B5
-:107EF0009E37B3D2E22970517CB8C8F71FD184F6FF
-:107F0000BB9AE3CB9A653EA4A79AE7587F490667D8
-:107F1000E1FA30FC4D2A2748C7BB62C8E24AFA7C26
-:107F20009795956A7C7D8FD375CEE3EB70DF97D202
-:107F30007D877D4DBF9B3E07B851BC00B8D17D44C5
-:107F40003CB8296905EEDBD2BBA55B701F3DC308B9
-:107F5000D46D896C9DEAFE8FF3F5ED8A71154BB4F3
-:107F6000BFA0CDECD829C17C9C9A18A8175A1D3BFC
-:107F7000097CEF7A12C6B3A5C4389AC2F81521AEAF
-:107F8000620D1DE75CB299EDB7F75DED8C7CA04703
-:107F90003BB6DB64E223C87F48AE2B3FF45D453F30
-:107FA000D65F05EF6F6AB3A780E43278205C383C77
-:107FB000BC1BFBCC0DE7A71F717878AF2373816FD3
-:107FC0001CD4139311FAB7D071687FC93B473DB1F8
-:107FD00015E7D784EB3A60B1605991E82AAEA7FD66
-:107FE000D9FAB91A002E629D6A782CE1F0D83F6761
-:107FF00051A106F07896C9017477FFABD212C46B19
-:108000008F911225E03DA34342F703E882B8B5B84B
-:108010001FB5F52E6F74BCAF443AAB4D8A71C4489E
-:1080200088F74E947F1E9397E13D937FB19398BC60
-:10803000023E59991FC90F049F01F906F82CE8A2C6
-:10804000766C200FF6F79BF2952E1DA3F32E0A07F0
-:10805000A0234137E65718BD6CDD682F85F6AD9437
-:10806000EEC3F7FB90DE83F47B28B78F03FA8579A4
-:10807000BACC21FEDED7E28AB752F8D56A7C9BB52E
-:1080800039217E5CFBCA5D79EE28F827F8B151CB27
-:10809000F89CD11BEB65FDB2F18C14DCE6222C3D83
-:1080A000208F623730F8A8FBC9B50AF96AB49CA1E1
-:1080B000727C3ADDA4F87E844CD2B873613E6B8C3E
-:1080C0008143746749D686A01EE6910CB20BE8671F
-:1080D00067AC17F856723271BF10A5DF242BE3038B
-:1080E000625F9A13181D25C7B1F7C75A995E516888
-:1080F00065783991BF2FE62FF0DFAE717F42E4DE65
-:10810000E598F88ECE0BDBC57CE8F75B0893BF38AB
-:10811000DFE43BF3766E0DDB8F101D5D5704FBD45F
-:10812000EF6E9F768929348E90A7EAFD87F903FDCB
-:10813000C07A2A07F7FE5EF33E468F6A7C9CCEF536
-:10814000299395B0F774BEBF225DAD35939D30BFC6
-:10815000EDC49948E755F7DA40460FCE601EF4FFAC
-:108160006682FB19D88FE1E3399ED3E733E8F3D574
-:108170005AE231D03D59BD4BE70D1819CD7C4DFF6A
-:108180001B97C0FAEF361B3D32C5F30F13DC0BAD66
-:10819000B4EE29230E1FC8A51F53FE01F4477C250A
-:1081A000C05FEA48200EE05C2BFBF308DDFF2BB13B
-:1081B000EE25F0FE698D3F0B9E1312407C3D191396
-:1081C0005740687F6D7A5FE67FC1BC8FC86427ED3A
-:1081D000E712714E81755CF26B123C741DA7DADFF9
-:1081E000FFCDABF4AB85AF5E5C783B40696BECA236
-:1081F0004768B9C0A8316A8786E071D21C9DBFFE6E
-:1082000098E385AD89E95DC18D062FC047FDDEE4A9
-:1082100004F65EDDE574E2490C7FCEF8689D36A871
-:108220000715B2EE7216F1D0714F6948756B143DA7
-:10823000F39495F1AF368AFAD1DA4F733CDBA5237C
-:1082400079DB613E2D940F02FCB476E417D5BFC8EC
-:10825000716CA5D5B6DCE021D023820F48C8FF4F52
-:10826000EA18DFA17FB38CC342F213D413D00FAB53
-:108270002D1E9F86F28DEA06B34F2EC0E7DAD1B0ED
-:10828000771E8B16F8E0122E1797D6BFF995144774
-:10829000DBB5C4389A7EF79969591C8885AA1FAE48
-:1082A0004F06E53B654133D22768B4A08F4BCEA97A
-:1082B000F2D7B157D3E7B4A8B723BED0FD9D96E05F
-:1082C000F2C27E2F8867F05EB03ED6EB09E37FB343
-:1082D00038BDAAF16C17E0289DEFC712932BEA7105
-:1082E0005E4C289B0AFDFEC3EC7A16F077C1FA8B30
-:1082F0000A7ED625059E7E04F071ADD9F114EB36C9
-:10830000CB15462F87C5B89735B87FDD85FEBC0DE8
-:108310003980F7C1AC0F289C5777182C1E3BB4EB63
-:1083200015FB7FBA9132BEBC30F974AEFF04620215
-:10833000F83B36033E2CDD124B3C8342EB00851BA1
-:10834000F0BBF632C17E9674BC7902F879AD368006
-:10835000F8B3C468C2FDA9BDACC579902DBACE8072
-:10836000F89ECADFC438E721589FE767A3AD676F5F
-:10837000A00F53E8735CBFFB6D78FE506C1C71322C
-:108380007AF10EA4F3BF64B4C7275078D5E9297EEB
-:108390000CC16E5CC630FD8A649895FBDF71E42BDE
-:1083A00098CF32A35B0FF27EF9DC7A3DD0E582787C
-:1083B0005F896570F8BE8F96BFBEE19BEFFB6ECE06
-:1083C000874EE9295D44A1C3D39C2E26034ED2F2E9
-:1083D000543AA39F5359A4FA0528AFA725FDEE549C
-:1083E0002EAF17B1BABA1F7D02A39F53054C5E7919
-:1083F000D631F9A17EEF32DFEF6909CE20C04D3CC6
-:108400001F93C09EBF98E0FC02F089F2C3BF737C4B
-:10841000F559697F0B5E3720BE924DC13CD8C79E8F
-:1084200075E5F1F926479F57DF04B63EDAEFBF60E6
-:108430003CFA9E13F5F6D762BC608790A9943F037F
-:108440003F5E9749801FD371F50936ECD767C5F7B2
-:108450000CB80EB285F2698AB7DD2576DC97ADA53A
-:10846000143F814FEC3558804F087C127814813FBF
-:108470009C8F09397C33C86119E570624209CA6171
-:108480003DD039ED51CFF4C1FEB8DF8867F237DF58
-:10849000EFBD46B68F94DE3313703C5F7E38BD0966
-:1084A000380B3E79AA8F122F9EE27C70007FAF07B7
-:1084B000CE09ECBDA47E4CEE09FBA084EFFB335645
-:1084C0006529E4D8F0494ABDE4198E6FCF58E3C45A
-:1084D000BE1402BC85FC8BD8EF47D97ED3F786C18A
-:1084E0007A1618828B12A9FCFA01D58BF445F8DDB7
-:1084F0006EF82EC24F319EC9DDBA7566027A81339D
-:10850000C1C2E05F1CCC82FEC8A020F2A12584F28B
-:108510001BE9DAFB073E81344A23D3E298DC9164FD
-:108520003A20D0CC206287FE28BCA784C35B3DDE06
-:108530004968A27AE0EC04497B16F6A89014C27E42
-:108540002D7AEF0BF342DAE5458BD1A3A172E487D4
-:108550001AF73CE8A7F3B623A8F79FD4FBF29A4D8D
-:1085600051DAF5BEC71F9242ED8B9F913D7ACA67E3
-:10857000DAFC9D0FCCA178B9C42F3B60C82577FCED
-:10858000F59DE1A04FFB750EB06BA93E71B796CE7D
-:10859000FBA486ED27A957FA051A38BD50BD4A4BF2
-:1085A0008685F893D00B5612DF00D01F9612A71EB7
-:1085B000CAD36B574C25145ECB4D0DC8B7CEAF9BBD
-:1085C0008CFA7215F160FBD22DBAD3E1F26479B363
-:1085D000B2BE62BBB2BED2ABAC5FF811C3B748BC8F
-:1085E000677A98AD3CBA7EF118A7B70BFAE8EDDBD5
-:1085F00038DE96FF6CEA4348FF7E1D31503C69D857
-:108600005B9A42A2BC2FCABACBB9C41B268742FAD6
-:10861000471EF10E85FEAEA03F10FA013BB721C602
-:108620009902F6C885B2E8F37880CFA3EE729F5E18
-:10863000FA8DC37E2FE45E7D9D75978DF85EE4F71D
-:1086400026EC97EA5951BFFFAD805342F4F65FF72D
-:10865000CC2F15E562E83BBB4AFFCA40B95A77D92F
-:10866000A290D3A1F6242657B99F80EEAB07F562FE
-:10867000AEF7518168391B1BE263BA3E6C3E826ED5
-:108680003E9588310DFD6AF7723BC25100FAF1A7A1
-:10869000A07F01DD4EB4BF16A0535D7AFBC83C6DD0
-:1086A0006E88AED4EBA1F8F879204C2FD89F604E9D
-:1086B000C2711DC401E30A7A58745B45BC9BEEDBB2
-:1086C0009FEE284F710F0EC73B0F8E5FAB177A9F3F
-:1086D0004921C7894ACE2F6D3F827ADD32A32B0F05
-:1086E00098D39FF7DE867452455CC9401FDD7B0737
-:1086F00066B9FF17F25DCC67A6E7561DD3E3295094
-:1087000029DDCEE0F399D9C1F44A8DD1A9C3719C7A
-:10871000C46E4946539DCD9732592DAD8FE9993F8F
-:10872000381D0919CDE72FC1F714BE63784996B8F3
-:108730005361DE0618978E1743BCA950368D74D846
-:10874000A11C27B9B46C1E5EDCE709A43E03DED78A
-:108750001803325B279D41327CDF032FAC9B797D70
-:10876000D3AC4B8B96C3739319F98F9ECF434EA412
-:108770007C7310F22523ACDB60F29D87759979E953
-:1087800029637ABA2797389AE86B7D482B81714D17
-:10879000A68B1E58AC855824A8C7582EF9C05EB9C0
-:1087A0006831793443909F1A12819F4A6F57C1BE36
-:1087B00050FECDFC57BDB56B7D682709FE98C0E71C
-:1087C000D7C4F9631A61704822AE7D4E8AD7F799F3
-:1087D000ABA6923810E36E1C7F47DCA4C3305F0069
-:1087E0003CCAF949DAD3E172C6E6D22AF85FCA5C1C
-:1087F000653DCDADAC1BC9490BE8A392CF95FA7589
-:1088000022DA7F83C09FA3E3FC66561F362F813F89
-:1088100079899CBF733DC4C5FD01B5097A827EC4C8
-:1088200064A3910C41BD242F91F9073EA63B4DED69
-:10883000C620F2F3C271CE010F50386F7E4F76DC46
-:1088400049F769B3D9BE510BFADE3C89E9F7DA562C
-:108850001FF8875A16591D5BA13DC679CF3FA1FD70
-:108860003D9980BE55077EF94478D1520ADFB56440
-:1088700059F0BDA4F220FA53837711D4A722F0F463
-:108880000A9D3F85F713880CB49F6596D5CFD1F725
-:10889000D35CB10E29ACFD4968A7F394385EC0F3F0
-:1088A00071C3C0FE657FFD3A0AFD4EF06F386594D6
-:1088B00087751D856F98E83CFAB90B1D80B6FD3BA6
-:1088C00078FC25C9E065F1074AB5741EB38D6C1EAE
-:1088D000751DA53797D0F6FEFEA104E210B187ED15
-:1088E000F36BA04943ED6EF8AE2C16FD5EC7B8FFE2
-:1088F00089707E305C456FA342F88FED85A24ED51E
-:1089000006E730E6D6C07A12A30307117F8C3E6FCC
-:1089100024A13FF8BE3CD41FF2A3F1A1E610BDD1C3
-:10892000A515191D4D35F4BD839513110FEBC0EE40
-:10893000A2FB315CEBDB07F43D8A9785BC244B9AA4
-:10894000119E5B37FAF6EB72C0D5E292A13ECC7273
-:108950005713F43746F2619935F7DE2640AB7DA018
-:108960009C217EB92B801E3757100BE85F4D231CCE
-:108970000E0B6D9A3397F96767CF357AC1DF3F5B8E
-:108980004B585C4CEBCEF901A5AB1F2C607E61A867
-:108990002F08F3BB8838C8316AC7EC8EA20FEC4BA6
-:1089A00064724A7C5FB749AF8837ED4D3461FB1381
-:1089B00089133C89A8A7B97380FE3627727D6C1095
-:1089C00019047C258CEEB722DD97BED51B5F50B60F
-:1089D00073BE30DBF90B1DEAF19C3F083EEC023A16
-:1089E000A4DFF925A70EE0F7611983FFD1D295C85E
-:1089F0001FE610373EA708A27385FB9B2685E94337
-:108A0000749CD92EA57E3467AEB22EF0558C3BCF28
-:108A1000AD6C9F21F4DB494AFD76C17F5DB1A21C9C
-:108A20004C797ACDD7D9185F413F411DDD27165FBC
-:108A3000D1B278CB26BD17F4A4BAF6B5076D40477E
-:108A400077104E47BBA56518FFD92D2D0FD323FAFC
-:108A5000D67825E0FB03E99AFCB8AF418C2B1DD3F7
-:108A600079F741BCE5D84ABA623ACF37F42C6E792F
-:108A7000208678C06F2DF0D33C83F95D291A63FC02
-:108A800024C312EB007CDAA229423FED9638B323CF
-:108A9000DC2FBA7523C5BB30FFACDDC0428CC77A72
-:108AA000B17F8F24323BE74189F9C93DF38C68EFF0
-:108AB000D9FAB91471099B4C4E80BFD19368473CD9
-:108AC0007A90FB4320AE3794965E89E9333DDFCB45
-:108AD0006413FA2755FCC796E8C0B8802D3E1FFDE9
-:108AE000FB733B0A9F447E638A710C9042FDCF75F5
-:108AF000B7689783FFA0A345BBCC14C2BB93025FAA
-:108B000063492CE06B8FBFEF0503FAFB7EA871056C
-:108B1000002F6BF4BE02A2C4E7C0D5E4D80A8E2FA2
-:108B2000BA32D7BCE5743EDDEFE899FFEB0E82F474
-:108B3000FAE21E2BFA2BB53308CA934DA504F1A116
-:108B4000BB4542FDED336B35DA019BA46694135DA2
-:108B5000091370FF56990EA05D5BFDA8EE74B8DE98
-:108B6000B5EA49657D35F1A35D5DF35C043E23FF05
-:108B700012FCB1B64DF91DE9AFE48F859CEF17B932
-:108B80001C332B60EA731DFD985D4D7C06BA8E92F6
-:108B9000B7F5DC4FBC80C94DF2B404FA56B7F99C66
-:108BA000CCE89CF1E312DE9F5A0E95707D6A2CE5AD
-:108BB0005B607F0AFD88BE8FF5039A0E3955139AC4
-:108BC0005731FF4EE865826F8B7D291D41C8088AA9
-:108BD000F7B9497C5F73492EEC2BED1FE901504238
-:108BE0009F80FD7BC06E1BC5C7A3FBEE0139EBD197
-:108BF00018BD80479BA57AE4D346C2F9B5E446BECA
-:108C0000FC3B8F4706B88E24F533A7D2F7461BFDF1
-:108C1000B1000F8A0F7949B6109E34115FD66E49A4
-:108C2000812FD8DE697D2B2ABE08F9E2FB90E91777
-:108C300053E88AA19F0A08F8D0F280C4ECC289A642
-:108C4000FBB5F0FD5B9AC9880F9388570BF3ABB067
-:108C500028F77962AAB23ED91E8107328CEBE4F084
-:108C60009C3248D9EE147C8D28F95A0EB982FB4CFF
-:108C7000EE3AF443F00BC46E208340EFA01A22D2E8
-:108C80009B9A1F4C4AEA355E3229294ABCA49BFBB9
-:108C90007F6F2481AAE7A4487CE93AB8414E0DC30E
-:108CA0002B81C7AFF0FC0AE9751E972D66FEC090B8
-:108CB0009C67F8328CD76E047CA3EFAF1478924D8A
-:108CC000B2014FC6B4C7F8640AD742DECF8D8037F1
-:108CD000452179EED398ECFA5CC00FC716598ED4B3
-:108CE000DB9313EC882743354EC49312E24884FD8E
-:108CF00019616C6DD2C2FCF70CEFEB3629F0620DF6
-:108D0000E28544F102E92A422E2ADB557823F6EF68
-:108D100030D79727124F7F188FB2B103A02FFB7265
-:108D200018DE541027E2C99BB99379DCDAADC57E11
-:108D300088521E961B9578A0C62B3AA2267C5C35DD
-:108D40009EF58637D98037421E265E1B6FEE49326C
-:108D500029F4EA30BCB927A9A477BC51E38BE027FA
-:108D6000BB632CE5A097D6554BC88787BED3BF09F8
-:108D7000EA03D7E460FECB6EAB03F5D6BA7AD65ED3
-:108D8000EC77CA901FD3AF81B7E7B8CAA15EB781AD
-:108D9000C5294A8EB1FC99FE77B0F6C23BEBDF30B5
-:108DA000837CF7B0EF5F39BF598EA3EDDECDFCFBBE
-:108DB000D2E672A8D76D61DF7F067126BABFC34EB7
-:108DC000789BE0F97577E73898F9C9F4D9711C4FA9
-:108DD000774B2FBC81DF35B3EF561C32F621A80745
-:108DE00033BD752C5FE7B847D93A933EBD69929D74
-:108DF000E2EFF2A007F5A6B39A9A61C86F7AB13391
-:108E00004BA5E60C2829DE209F711A295EE7B238AF
-:108E1000E44E3AC45B49CC9F21E277904F109E3FCD
-:108E2000F0561293F7E2BDE404C2E2CD0F9BD11FCE
-:108E30002CE28BBE87880474066BE4F23F6ABC7137
-:108E400062BF7A8C334ECC1671C68076091DB7F09E
-:108E5000EB2F2644F3A71C4D627AEA399E1F219E10
-:108E6000577B73348017BB0149D20148F5BF07BD5A
-:108E700009FDAF4C6878C808D857560F24D56CDD6B
-:108E8000428DF4159A7AAD07844C16B5BF68D7D3D6
-:108E9000FDC4171F1739FF895AE203F944B46CFE69
-:108EA000554D540E4A21BE345BB09DD103904E67A0
-:108EB000F17DBA28F8CD503214F8CD6CBE6F3F303A
-:108EC000D6EB98BC6CD6A9E8FF2F48FF3B7AD59B20
-:108ED00095ED2AFE50CDC7ADE2FAF24A1244BDE04C
-:108EE000ACE4C5F2DC0EA62FAF361D43BDA2FB617C
-:108EF000A627D69000EA1D6AFFE1EA5DCAFA9A56F3
-:108F000065BDAE5D59EFCEF7E038DD3BD60C03FF13
-:108F10005DF5F677D02F5C2DF88457C927A882C459
-:108F2000F8C443D7A3DF4663A47CA218C0D507F3D7
-:108F30004D86126722F00310B25FD3FA5DF0491A32
-:108F4000AD6B5C093694339312CF88F1658CE7BE24
-:108F5000E3B487F6A5C72E54F18942E18FE99F80DB
-:108F6000FE2AC1370AB95E4226A9EDC6FB91FE86EC
-:108F7000F25ABE8DFB53B8DD23F40CFA3DEA197E9C
-:108F80008DC9ABD184EB155EA4C72223951348424B
-:108F90000E23B3579A896A7F0B6D57B79B94EDAA3E
-:108FA000FD1776CB30BEFFF388BB2FECC72CE23A1F
-:108FB00008F2E1E887D50A7BE9C33F4E10FE14B4FE
-:108FC0009BBEBDBDE4FB4EF652CFBEC750FD919691
-:108FD000E533260F7800E2E36D3198F75927B17D2C
-:108FE0004E9E772C2BDC7F78B491D8B46174DF343B
-:108FF000D96084F860938ED91333A69C1AB6248C5A
-:109000006F3C6F2C9D0DF0DA2CF97FF411D81747C7
-:10901000648279351D36DCF74BCDF439C5B74B8FFB
-:10902000DEE0F0D0C717742CDEF899545F05A95024
-:10903000621E551B7E1FA3A5726C85EC7D2D00F171
-:1090400055C9FB720D6D3BAE772F85FE576B7C7A51
-:10905000E6B7F3639C54F4DFBB1FD2837C4CBF9F05
-:10906000C9C5A0D4C7C1FCB89EBCF078D39264E651
-:109070006FFA30C15507E308B927E20927D74E8CAC
-:1090800007D1F02571C6439C53D242CC2E723CC806
-:109090002BD814E6573E19133D2E70878DF1579843
-:1090A0003EF0F734ABF32736E0B7DCFE3BC7E35DB9
-:1090B000E7E258FC6B8B8DC9810EFEDDE3BC3CC73B
-:1090C000E363E7129476A378CFCBBF3BD368346ECB
-:1090D0000ADB4FFB43867A2FE653F1FC9106C2EC84
-:1090E000A43DD696AD61F1D0676DA51D000F5B3F25
-:1090F000A73E0DE0B787C961884743DC78A4C5FD6A
-:1091000020B4D7DA8913E2AEC41ED0CF84F823D8B6
-:109110009DA83F307CE98E61A598D7B3B6CA0E589A
-:109120006FF7DA00EE674FBD92F1C7676D2E1CB77F
-:109130007BB668E7F56D01BEFFCC7F20FCD9BDC5CD
-:10914000C3D4F12F2A38989E1DC3F8983AEEBD502B
-:10915000F0311EF75EC0F9D0C20EE61F5F64249B9B
-:10916000FBD2F6C51D29CC5E8CF3E429E2DE9ED845
-:109170006F95EF20F0B33BD3DF13AF7D382C5EBB90
-:1091800086C7FBD688F5B529D777C4D66BBCF688D9
-:109190002D4ABC569D17F032C8F7FE2178AEB3B009
-:1091A000F557C835E57AE013CB08E691AF3BB2B48A
-:1091B000C948EBEBEE02CF1FFC317D750D87576F71
-:1091C000F3B3B934C4AEF013F721F630BB38CD9DFC
-:1091D000A0A8A3061C9687D9B73A5DF17D667DAE3F
-:1091E000E2FDEC0DD72BDA733C458A7ABF2D372A86
-:1091F000DE1FD05CA6A80FDC7E93E2FD42D22F1EBC
-:10920000E3B18765F09590EBBC3314ED37ECBA45CC
-:10921000F1FD67A4FEC1D1F4BDB618260788C7E9E1
-:109220001F3C2C94779CDFBA44F17D93D43ACC4711
-:10923000DF5FE667FEF621EDAB14FD5D889BC0ECB9
-:10924000081E7FACA7FF181FB7CBA80FB54BE46172
-:1092500029321E59DD71EFE6BE2452AFA07F28E708
-:109260005751390F7A945ACF30279B93101FD24908
-:10927000FAD7617415C20313EA61971E95D19F5600
-:1092800048063E341AE1A3235E7BE47E5D22CCCF08
-:1092900073E939B303FC652B8E2C45FC33A42AF10A
-:1092A00020C6AEC483D8414A3C303B94FB1E3F42AB
-:1092B000B9EF6A385B9D4A3C107014704E9CA4C490
-:1092C0000B01DF11F41FC0B788040F619EB5577200
-:1092D000F84894786F7B0BAEE35A7ADB70153C87C5
-:1092E0001E703699104E2CEF4AE84906EE9F56FB49
-:1092F000CD85FE313199EB3DBC1FE1E7DE2C795085
-:10930000CFE989678DF065F97240DFA927CC5FE26C
-:109310009A926C8BEA57C3E7BDF9D5041C853EB31E
-:109320001AF4193ACE72E246BE7486EB332B4CF730
-:10933000635CF0C21F197CAB8917F9F5B78D978371
-:109340009E48C2FC8D6A384A1D92CF0C74C0F976D3
-:109350003AE9107CDB8D791314ED8CC314F105A56B
-:109360001E4A9C52387F127AA9184FC053F02D31F3
-:109370009E81D4CBA940072A3E4606A9F554A5DF15
-:1093800043F84970B0B038C6F09EF804B313437E7A
-:109390002FE6E790B3739A08E8DF16E1D7F0CF879E
-:1093A000E7C2AFA1B6EFAF15179DE991028FE44474
-:1093B000C643457C952EF3D38FE8C7A3257B268C27
-:1093C00037E3958136A289E697739C7895F6236BEF
-:1093D0008289E1FE32E1BF7E530AE0BC7F409C3FC0
-:1093E0002561FA422D699D303F07FC9F546EC541AF
-:1093F000C9FC3EA45DAD97B278A286AE04F07B3581
-:10940000098B17E684DAB12E47D6459ECBB5E4FB2F
-:109410000D2916EEEF60F93984F33761BFF5662F39
-:109420008978FE413D85495128AFE5E5646E6716B0
-:109430009002E89FD2D52BC9689F533A94C2E9AEF7
-:10944000270F06DB23E84EB57E11CF97CDC5E87711
-:10945000591ABEDE6F000FA147FC8BAE0DF6E7FE7A
-:10946000643BD6D7F439F907273417FB15F98C7507
-:109470007A963F4C5A95FAF3C7C91AAE4F38E56F42
-:1094800002A7DEF781E785F17DF8A6FA90C80B13F5
-:10949000F03B23F86008DEE7147CACC76EEB81F785
-:1094A000B9687C4EC0E36289FF69D827D97C2C1942
-:1094B000E0FC0FB3EB22BC9F79227056D284E655B4
-:1094C0002177623EE8A57619EDA4DA312C4FA87613
-:1094D0000F06CD49578701E382D5ED6FA07ED6D91F
-:1094E000481969FFDEE1D4B35E15BC7BB357C47A7B
-:1094F00074294A7C13F922749D312951F3017AE0D1
-:10950000A06CE77010794A15F2E0F840985D728817
-:10951000EF7B8CD6159F42C72F7E3F230EE0532151
-:10952000771C4A07383448785E699C8178C0DF9F91
-:10953000C6CFAD8D08D43B2C141EA919263C7F3410
-:10954000F087B20BE299A71AD627C0F9AACF1BE978
-:10955000D0D4EE1828695C886FE4858F7F5C0C712D
-:10956000B60598A7BCD0C0E2FF393F8AF5F5A37CC9
-:10957000E2753D3102BDE972EBF17C46D02AA3BD14
-:10958000912493F1805F02CE49B16C1DE279E963C9
-:109590004F4A90CF249E8F6B0A0E5D07F94CB0EFB7
-:1095A00025A1758E2B0F0EAD3785E02CF204893680
-:1095B0009835238C3E8E7078D4DAF49B411E761950
-:1095C000B91DC8ED4162D1221F69E0F1F69303A8ED
-:1095D000458AFDF8CC9097551BE38C1F0EFE2EC8D4
-:1095E00027A0C5971667BC15D76F47BDB981EB5744
-:1095F0005D3CCFBB6172590AD853BDE53F4D4D610B
-:109600007A7E0D8F838BE7355A1FE62DD540DE71AC
-:1096100058DED3B7CD3B16F9E6BDC2C1AA255A0A1A
-:10962000875A89B8AEF6DEABFF92A3DABBEB5334B0
-:1096300057CD835B952229F2DC6A21CF8D3E6AD813
-:10964000539A42A2F4D7236F2EDFA8C8271379D2EA
-:10965000B597C7623E59F9CF3AF19C20F46337853C
-:10966000F2DC7A83F3916406E75AC80F1B1AFE9C5A
-:10967000E151A8FF24DC875F0300C1DFD12EA35F87
-:10968000F6D7873593764699EF76BEFEEB6D5AA4F2
-:109690008F1B7CC4D912657CF19E38470270AECC1A
-:1096A0008F9C5F5B596011CC1FF257A38DB795E378
-:1096B0008B98775B42A08AE3399EE3E8A95B94FB31
-:1096C000F80CDFC7B69B0259781E6972F47C7AB138
-:1096D000DFC3B4F512C02360761F44BD730EAD0C1A
-:1096E0008173003E0DCBA36274D6DBBE87E0AD5123
-:1096F000E41546C25B8FFB2CFA1376C9F9ED32C62E
-:10970000FDCF1FE574499C2689D2D7AD5C6E9D279D
-:109710002C7E70BE59427B64899B900D94BFDCFA0D
-:10972000E46A8CDF543D357433882B787E07E5235B
-:10973000B7A6123296964B3629E3B7CBEE8E88D772
-:109740009070F948D54FB4AFABEE577E574DEEFE53
-:109750000BE83FD52AFD6620F777ED4DE1F6C230E4
-:10976000320CF8FBBAA7BED043EA6E6FF8FE39A5FB
-:10977000EBFE5AE083162CDF4D711E003EFF718A0E
-:10978000FB4DE0DBDDEF31385CAAB9C4F8FEA3493C
-:10979000286F0CC09CE9FF1AE6B338ECCF28BB80D9
-:1097A000F89BC1C0F41BA1D7C9F27A398EB68FFCE1
-:1097B000734302EC5FD2B3132781DE6F7B36D60989
-:1097C000F0DA5AEA2C043FC0D64A13E633180D2CBF
-:1097D000FEEBFDF5C8FD100EE8DF7A6F19D8A196F3
-:1097E0008E7D3EF0936CD1FC05CFA16C19CBF2DDE0
-:1097F000C438751D95BB613E59B398DCD89AE32CEB
-:10980000B484F54BB89E56CB61D6BD77E03D70FE73
-:10981000FD91C3A826D3F5E5A23FEE7AC2F653E444
-:1098200055C1D8E1FA6827953F909C27EAD7B74AF7
-:109830003E1D5DCF9AB6DD18C7A8B9D3973C1FE48B
-:10984000CC335A8C0389F925BD9E5606F11E215F43
-:10985000E64B1694FF42DF9E47C41F8B17CDE57879
-:10986000308FEBD9F363197C971047167C778B9177
-:10987000C4819F7A7E796B09CA9FD53A2BE835223D
-:10988000EED1BB3E10DD5F54FBB4999DA795827964
-:10989000D0C9E7D4FE20CC6F14F57C52522AE3AF36
-:1098A000B5795CEFEB4F9C1067AB7D6D600BF805F5
-:1098B0000C7D583C96F21DE38822D47B8D60CFACA2
-:1098C0007C35C6C7FCD65E7E6ED6590879217533C5
-:1098D000328A303FE104E51F66388F18C8423AA546
-:1098E0007C45A2B22D7FBB65AA16CE0DA653BD8ABC
-:1098F000D6E7A7664DD5527CAFCD0D546968BD69DA
-:10990000FB7056BF3E7016EADBB697B17A51A04A9B
-:10991000A6F55DDB5DEC7B30F02862BDB47DCE54F6
-:109920000FE813562EAF1D013C475CFBCA404DB8F3
-:10993000BFB22595F1A5CFB9DFF5F31CB27806C00B
-:109940007B5000CFA989F77E9A2AF45C96E72BD644
-:1099500029BE23A9D1FB1F9DCAFCC42BF9F9DF71D5
-:10996000B1644B0C8B5779E228FC0F740CC4785B04
-:109970004E6A028717EDA738D48F80A3E84F8CBBBF
-:109980000AE42AF05B1DF39B8AF6C9A98C3FD271C9
-:1099900036E1388319FC6B676414C2BED1FDD2F284
-:1099A000FDD232FBB385CD8FF66B2D40FE3E14FC0D
-:1099B000DE07AED0F77342F356E3C70F387EAC6CC8
-:1099C0006271C6A0B51FE2D1B858A6EF9162E53A20
-:1099D0007671F8B5A45A997DD5B31F29128ED3C4D8
-:1099E000E19841E19EFFEDD75DFD3DAD3B6CBF9C35
-:1099F000709EFF40FB753BC3D723F2B6453F9F6F78
-:109A0000547D3782E54FD526F4C3EF7E16438CF89C
-:109A10009CECECF92EA780E999A07F8AFB1D886752
-:109A20002C3A0B6A38D7E8B9AFA195E711F677B2AF
-:109A3000F3CA33A616F3F559F8FA2CC6B07B1A7A96
-:109A4000E8F158306B9639127F7BE0DED3DFE022FD
-:109A5000DE9F82AEA3F507F4D1DB7E3CCCF1E3DFE1
-:109A6000B61F629E2A78F6C059353F014FA067FCA9
-:109A70006EB0121FC53CB7A58ABC61155DE77CC7F7
-:109A8000F14AD9776B6EE3F9C076253EAF69CBD149
-:109A9000401C5D7C37097CEDB690DF6D6F2AB7DF27
-:109AA0003248462F7970FB52A3FBEBF0B9DA7EEB1C
-:109AB000B6B2FC67B5FFA0DBE6F0C3B93ECF457692
-:109AC0009E7D944ADF8038CC0BA6D0772179A2AC5A
-:109AD000C7A531F845FA838278FEB6D850F6A2DDE4
-:109AE00041C847DBD7207F2E8E2F5B9F43EB81ED54
-:109AF00075ACDEB7EC8B1CCABF4F6FAF67F51BCAE6
-:109B0000BEC8857AEA5A561FE77C51C608C2DAA950
-:109B1000E3D342FAC3A7A976A67F946B08E09141EC
-:109B20005EEB003929E0D95B596CD0D447D34F3B69
-:109B30007BE899C5294670F93C42D8E701ADC23EA1
-:109B4000EF8E63E793BB419ED2F5FE3DD5FD975462
-:109B5000D053623B17E5D0AEEE8CFD580FFA90E47F
-:109B6000A4FA06F83BEC16B200F2EA3AB7BA403F64
-:109B700022AB1C462DC293FB9FE8DABEA6FDBCFAC1
-:109B8000DA33B7F765C3B8601E2339FDD7BDF6D504
-:109B9000DF204E5AF7B9C901EEBD911D3BD6837E39
-:109BA00035B2E3ADAF98BC65E735C4BC47821F91C1
-:109BB0003E1FD16EC0F98FECB86E39BC3FEAFD8E06
-:109BC0007E801F634EFA9A801D74EFFD5D5FC5397C
-:109BD0000DF299F45DCE69F4C0E3CF54798A4778E9
-:109BE00024A6D9001E57305FAACB76747300F534D3
-:109BF000E57918AA97639CF512E9E380788138F734
-:109C0000ADF65B9EA8A4EBA3CFC704E90CC2F4E5B4
-:109C10007197A97D1FA6679712ABA25E6E4C53BCCD
-:109C20005F61C951B44F4CBD4ED13ED95EA8A84F1B
-:109C3000193452F1FE3447A9A27EF388C98AF72B62
-:109C40009D958A7AA1AF55F1FED0C3EDCAF6637631
-:109C5000DC87A1275DE5A0C73BFCEE262887773689
-:109C600097C7DB4984BFB638E06D82E7A3AED497CF
-:109C7000F84894732CABDCE8E78F38C752CACEC3E0
-:109C80007769D8390EE19FBD12EB9E9486FE590A82
-:109C9000760AECB1C66022EC57C5E26D983775299B
-:109CA00048D09FD5A60FFC7C14C8F98532EABD6D5B
-:109CB0003CDFA66D6EBE177C7A27A4C0CB10AFF731
-:109CC0002C64E704C6500D17D70DB14D09F6C9AD88
-:109CD00058772959A9DAA7B58A7A85E536C5FB13DD
-:109CE00053372ADA27DBEF52EDD3BD8AFA34C70E99
-:109CF000D53EB5A8F6E91945FB9833812620A37116
-:109D00009D1ED94CE77FE389E672D89751273D0B1A
-:109D1000815E8A7DEE2660872507EADF80D247EDE7
-:109D200029F053ED6F4CC5F240A31DFD4C871A0777
-:109D30006179B8D181CF7FDF3802CBB71B9D58FE48
-:109D40004FE3242CFD8D2E2C5B1B5BF1FD171ADBE2
-:109D5000B1A410CC04799194D8730F4326D8F35D45
-:109D60009A402D4452FF3B6D1FF2C5AE3E812EA896
-:109D7000DFE9791DF9E24A30A628BDB54049F7F37D
-:109D800067E94E299D96DBD2D873919FD0AA7116B0
-:109D9000827E7D5FDA91BBB59954AFDDE84AB55854
-:109DA00059DD48EBB8D998A775E46EE768427E03A1
-:109DB0002203832647A642BD3B86B56F4B3B82FA02
-:109DC000B58823CF0AC591EF03BA57C7917F73CEE9
-:109DD0006E067FCAD12B03CDB0AEA3DC7FE4248511
-:109DE000BA5B6959AA2DD4815C3CA1D2234459A7FE
-:109DF000297D04FA6DD53866637EF04D3A02F9E8A4
-:109E00003324668FF6E881E94C1E754F33A0BD738D
-:109E10004CE35C8E794F52F07180D78B3B3E44F817
-:109E2000759B83590087DD3B4EB0BA2DF8B8E40826
-:109E3000ABEBD83A7FBDE383A91E53D4753E9F1682
-:109E4000255EDE96C6CFC7FA9C99207F45FD58A5B2
-:109E5000730DC88963A5CE01309FA32E03D28FC78F
-:109E600065F642DE25D13A4B6687F9550AD275B8B8
-:109E70008E597A4667E41639EAB9F3A9E94CCFC29C
-:109E80007D037B6E5E2CEAE1C734D1CF8D2FE3F0EA
-:109E9000B9D027BA7F65793A93836533CDD85F7798
-:109EA000430CC671BB5D03510FEAAEA750A2F4D1BB
-:109EB0007DAEFEE24BD86E10212E8C57CEE77CEAA9
-:109EC000371DEBFF7A9CBEFF7143AC0379B8E57A8E
-:109ED000944FB7F09717261A516F593823B30CE4F3
-:109EE000D27C1EF75A64D62663F84B6BD5C39542D5
-:109EF000CB4C859B41FC572555EAADB45E9DB176B0
-:109F00003394ABFADFAB87A39A3583776F06F5718D
-:109F10000D25AD12B49702EF34D2792DDE20DB99F6
-:109F2000FD24CE1FAEFE567916020F8FF17C190A62
-:109F30005FB40BABD225855D52C5E1F5651AD7DB61
-:109F4000F249FED7CA78CE65C093CE85EFE4F5E23C
-:109F50007757B673BDED0F7A36AEFADE0A31EE0AE8
-:109F6000BEEFC7F4C429811E778B19F1A360EE17E9
-:109F70007796D0F517745834188F177CDCCFEE0F16
-:109F80002B39E3463E37BC33F0F4718278DE0E7431
-:109F9000722D3935D3B311E5C3C82FA9FC01BE78A2
-:109FA000C5FDF1716C4D8A7A2ED3D758CDF9633D3A
-:109FB000F2B5038D1BB07EA8D183E5E1C62D9C3F91
-:109FC0003663FBDB8DDB397FF472FEB80B9F773491
-:109FD000CEC5F2B5463796FF30BB32D3812E8C6E9C
-:109FE000CCD33CB8C3406488377418104F29053C63
-:109FF000FE4812E4C1182C70FE4E9D0FA3E6B73D3B
-:10A00000FBDF16712FC675304E4FFE0BE867D9BDCA
-:10A01000E3CF516237033F294DCF9C06FCE3A8DD17
-:10A020006E06BDB5EC615AA7DF1E75DACD3A5A2F20
-:10A030004FCF6275B7DD6CA0F5F10FF3BAC76E8E26
-:10A04000A1F58AF46CF6BD9760B0FAA6F4FED38051
-:10A05000CF9612E900D043B931673CA4CE56584A96
-:10A060000F001D4C4CBD753CD0C19E343BBBEFC2B4
-:10A07000BEF100D4A70C6AD1C2911BA7A970137CB2
-:10A08000579654A985EFC667ACDD04DF4DE87FAF76
-:10A0900036FCBB4983776F82FA54478B16F4C13D77
-:10A0A000692C0E2AFA1175D12EF8ABC8D71AD2E155
-:10A0B000423E5ED0EE423E2EE05236ABF2A7E0A723
-:10A0C000AB6B972C12CC6396D41384879CB8DA2B95
-:10A0D000945A289F9D973EC4BC917E5707F51BB1AB
-:10A0E000BE6D6374BEBB283D8A7CF980D329C84D00
-:10A0F000C88BFE40CFEEF5780DD687FEC35BCDB79B
-:10A10000627F6E33C8D703694C4E1EE6E5655EFE7E
-:10A110009397751A6735C8CFBA741E4F8CA4EBF5A8
-:10A12000E98C6E55E7057A69E774FDC3741E5FE636
-:10A13000F727AC21EC5CD1B5F2B65686DB6F3990CF
-:10A140009FD37A08F246D579103570DEA85F643E59
-:10A1500030E58B2CFFB15D9947DA637FF4617C0FAA
-:10A160008E3182D1F1F3DED77DDF35D67D5FB475D8
-:10A17000AF242CCF59BD0EE2B6216D89BCE7C8F5DE
-:10A1800004A2AF27621DFC9E3E55BE35D58376C224
-:10A190007C2A169B09F86FC2F9C4F1ABF00935DFD0
-:10A1A000F977F1B3ABF09BDFC13CD5FC469C7B5605
-:10A1B00097429F83F352907707F7BE809F7E63B2EA
-:10A1C0007B3FD0477759F06F1AB0CF92028867690A
-:10A1D00056F741E85FD2B3F8BBC8673DA7F1FC165C
-:10A1E000F4A2F7D25722DFE902E140E9F108AD839A
-:10A1F000DE33D2E27A0BFA238318FEF496A7799421
-:10A20000CBC5C89228F215BB5BBECA423FD635F01B
-:10A21000BD373854C8A303702EE0D2885854793A19
-:10A2200025E2938A20EF3A19F588CE4CBD16CA7FF5
-:10A23000B79DD8999987FDABEDC5CEB4114636EEE2
-:10A24000844950B6EBDDDB6F053B69A401EDA477D3
-:10A25000799EDFF4D35792405E4D977DC90552A495
-:10A260009DD979644199BD20D2DEA4EB1B0FEBBBD5
-:10A2700096DDE932FA13008C6AFBB366C3DF08E4AB
-:10A28000478FDA7085C0FD65D7B647890C6CA2E8A8
-:10A2900084E30D284BCE38311D67D8B9FA37A01C9E
-:10A2A000F92533CFAF955774E3E5D637D831F1C1EF
-:10A2B000CA7B1746BCC5EC555E46DCEBB6CAA3CCE0
-:10A2C000572BF595601E851C8883F2A21440BF971A
-:10A2D000AC61F731887B18A81D9BD3D706762FCBAE
-:10A2E0009B1A07F9467472153FFE70D1ED48F7319D
-:10A2F000A8FFF4D8B12F69304FA04DEB8C1F037627
-:10A30000EC86018E8DB4FE27BFED8157695967F940
-:10A310001B09BFEFAD66C32545BD7363E8BE20C80A
-:10A3200087AEF9978C72A786902DB05F3564BF7E9B
-:10A330005D981C24AD7FE981FB10CAE72A017028D3
-:10A34000078DD39DF4BB4A6E6F107217AB733B8BB6
-:10A3500078CE4DC3BA8DBFEF59C0DA3345FBC2E9A1
-:10A360004E3A4EE500D1DFDE69584F1375DEDF75DA
-:10A37000A2FE007B3F477CFF12ABE78BF1DF67E378
-:10A3800099D9FB373D72DB74E00382BFBBFA2AEF39
-:10A39000F9A1FC7E565FDB55F34A94ED5C1E887B89
-:10A3A0007D2A7E3C39F61DA0E7560973E06AEED09F
-:10A3B000A17FFB42426B41F839659187E22A373B26
-:10A3C00041DF5BF3F2C09D32CFCB017DE37E9E8FF8
-:10A3D0005F219B301E71E96EC6E77BD3D7AA36BCDE
-:10A3E000A2D8CF88767EEF3206EAE87817B7A56064
-:10A3F0009E3BE9EFC778F8BABE92B8BF11CFB98AD1
-:10A40000BCAFA47EC409F669D2EF62D8BD9667FCE2
-:10A41000C87FAB7EC7FCBD6B76BC81726E896C4712
-:10A420003C7E27C7BD01E0D36566F717566D780DF2
-:10A43000E9B5299BEB0996E0E070787AFA72B91CCD
-:10A4400082FFA6BE255785BFB2FD7B86BFDACF2C23
-:10A45000CE49AFFA96F9695D66160775F07D3AAD9B
-:10A46000B10FE3F07A1CD67371B93FCF2A43F2B033
-:10A470003F99E51DBD5D0276D0A57A33DE77B460E5
-:10A48000FDA982F0F329A254EBFF9D4047B610BC12
-:10A490009E8BC4EFD66BE077EB7F12BF53B401BD48
-:10A4A00003E2A627D8FD63C3FCA7F5E1F92EFEBEA3
-:10A4B0004CEEC6B7B338913A6FCBDFD7CCF4241E3D
-:10A4C0008F5933E3EDD1108F11F4302E96B4827F83
-:10A4D0009DE2B583E3B503F05AE06F282E43BF8BAE
-:10A4E000425F21FC25388E80D3079170FDE81A78F1
-:10A4F000FBD17F126FDBA8FE8B71CC9762D07FA25D
-:10A5000086F3BF385C05BCE333AE0EE7F88CEF078B
-:10A51000CEF11976A5FF81C3BB37F9A4DE1F31EF59
-:10A5200028745AF25DE8F4E7999C4F6903982FAAC2
-:10A53000DEF7E48C887D4FCFB8FABE2BDBBFE77D1A
-:10A5400057C34D5DD6F0F8A6FAF9888C5EF9DDBFE9
-:10A55000058EFFBFF9CF17D6EF53B42FDE7044D16D
-:10A560007EABE73D457D74C05F0E682EFCE163CF96
-:10A570000551BFFCAE7EF5DEFCE9D35F5CA18178BE
-:10A58000DB083FF3E7FF35D3BD2D83C2F95D8DB7FF
-:10A59000C94CE13AFC642BBBBFAB3A0FF387D6F34F
-:10A5A000397E31FAEF1FDF4EF1E60B62407FA76F75
-:10A5B000DF755A7B7E241E945ED61067581E5AA9FA
-:10A5C000D1AA75A2BF8638A3E1CD7D1C6F30FF876D
-:10A5D000D2FB5C23D125513A9F3B57C27CA7B9845B
-:10A5E000E545D3D2E7A6EDD3B5C407F724579AB40F
-:10A5F0003E03C6F994E79A0DFC1E659294A838DFD5
-:10A600002C3B65CC4B9B3D82C5076F31B5E2B9D27F
-:10A610007987EFBC783B6D279B3C252CEF5A9C43F8
-:10A62000FBA3E6DBC4FDEECB6074DE2DF138B2A4F3
-:10A63000C37BB222E44106F38F4E9737CA90EF12E4
-:10A640007C8FA0DE2DE88EAEEFB0A1889DB380DFB9
-:10A65000B1A8243ADF403CF77C6F39BC5F73CC8EE5
-:10A6600070A91BB1B100F6B16EBCF489A12064D70A
-:10A67000D46DF812FBA9909F6B82F72F9D60AEF00E
-:10A68000E19DD44EB187FB2B038B802EAF65FF88F5
-:10A69000799F6CF4213E7DDC7818CB77C7BE5502DC
-:10A6A0007A46A0D11FD52FF95DFD03C22F20FC04EF
-:10A6B000820F88FBF93A32385F304A7DF15E352DE2
-:10A6C0002B05BFDC1FC95F0F655C5D5F51B67FCF97
-:10A6D000FCF59BE2794D2A938B6AFC56E3B5C06783
-:10A6E000B8FF1B7EBFE016AAEF815C9D4F3CF93599
-:10A6F00094CFCE5DD1AC1B257D77BC5E653A93458A
-:10A70000A29C37F9F6FCDC8EEB97CB65B40F447E48
-:10A7100082D887AF3222F4F87F5E432EFEF33F29C2
-:10A720001723E5DA9945DF4DAE11853E909A1981E0
-:10A73000AF199957C75765FBF7BCEEB073308B6400
-:10A740004DE8DC07E40F831ED7ED65E71AAB739A7B
-:10A75000F1DE79322218077AE3CABD32E221D13A1A
-:10A76000B56961F74E7512DF1F001F578C5E81E7D8
-:10A77000E122EE8B32B5E1F938F5BD51225FB89692
-:10A78000F7A3BE3FAA96E709D7AAF2764A33797EA5
-:10A7900070112962F9154ABD545D763512855FB294
-:10A7A000EB4A23FA01263FF6D2CF3DA343FB707359
-:10A7B0006604BECECCBC3ABE2ADBFFC3F82A9B9F00
-:10A7C000C47351DF165F0D766735CC5BF0E1059001
-:10A7D000C345C75DF0AAC10BBF0F20EEC9EE96D8E6
-:10A7E000BD34DD9F10F41B5DEB9EE591C7DC78AEB8
-:10A7F00073F8DB4E99E511B07C03A1A708BD655441
-:10A80000675066F7E1F3F3503C2FE89BF22F87DFA8
-:10A81000827A8EF0BFFDBBFCD642CEED35DA919E3A
-:10A82000857FB038E0423DAE4BE72B817BED3D7B31
-:10A8300062A2EA013B323557BDCFF51F66F70E80A5
-:10A84000FB4CCEDFC5BDAE1532BBF7F9925F46FFBC
-:10A850005DC34FDEFFED23F66BDBF575964B51EDD7
-:10A860002251D669D87989A2723BE6ED81BD04FEFA
-:10A870003BE1CF53BF7F30BBEC59985F853C1AEF6B
-:10A88000D9BCB49DCDA7B77DA9DB10C4F17B6DE722
-:10A89000E3D7ED2DB184DF8BD199D9639F59CE1ABF
-:10A8A00043FBFA4DF77F4C70AE42BFF97FDD6E98E7
-:10A8B0002E53D591CAC77CC9CBF453C2F4D405C476
-:10A8C0008FE52212C4D24D583EFD12E2C0721971BA
-:10A8D000613927DB1DC8C4FC966032E643BEFC8F9D
-:10A8E000C1803717C78E6A86DCB9EF4B4FEB2EB4A9
-:10A8F000E3F8DD2FFD230BF25AAE794F7E9CF38BEC
-:10A90000CC28F1E4FF2995317E428AD721BFAFE4FC
-:10A91000B72590F12C2E767F720EE24388FFA5B406
-:10A9200008FE07F1D6FC4F342C3F64A584F7BAB675
-:10A930000734485AF9CB73BC704F4F7B1B6BCF5F0A
-:10A9400063F54AB49E3F3286B5AFB57AE1DCC342C7
-:10A9500012407A5C0CA71E643807C3F89BB8079DA9
-:10A960006AECB9A0672DEF30B2FC7D12E80F7CBC19
-:10A97000A017FBE6E62CA6EF0FC9657C7B4899D2B1
-:10A980000F61E3ED0DD965F559B4FC719633398B40
-:10A990002E7548827FEB2F8AD12F8FBFCBF2D9C87B
-:10A9A000DB307E28BE7B24BBAC2FBCFFBCC4F2CD09
-:10A9B0003D7BF9EF17906072F8BDA273B2CB73A024
-:10A9C000BF415984DF531F1DAEF0FB75AE28F69CC6
-:10A9D000C8671C023615FAC3D9FD54CF4BAC3E32C2
-:10A9E0002BF9E64D26F4E17B40AF7D24DB5D84F35B
-:10A9F000D7136282F93F66F0EE44FDB33E0BFC9143
-:10AA00002B1E3768402FF8908A553857F251A31102
-:10AA1000CB53D4CE85F24FD4CE85F2136AE742F9F8
-:10AA200029B573A15C7ED9419186906359CE29598D
-:10AA3000B650BC4D3DDFF1598CAFF68CBF578FE35C
-:10AA40003764BB11BE3DFBBD8778211EF2BC359833
-:10AA50009E70157CEB9DCF30B888F89FBAFD463EBE
-:10AA60008F82362DCAF182F6405C55D87BF3B2D87E
-:10AA7000EFA9E5BF7406CF8976597AE0EB94E892A6
-:10AA8000A76B587D5ED660846F43B6B31ED64DE982
-:10AA90007B219405EDEFDF07E77968FF9847D02D1C
-:10AAA000051F443D5FB50E351CC4BA9EB7FAB7C248
-:10AAB000F7CFBF940B2BA1FC8630BA013C92A2AD1C
-:10AAC0007723CEF76643B018CEA9DCFCB51C356FF2
-:10AAD000B821BB14E16C12F826E0C4F7EBBBD275C9
-:10AAE0004F3C9BE32911F76C00EFB4831CBA1207AB
-:10AAF0007A5D258FD7B7B7F57F17D6E7392C930145
-:10AB000076C45F05DD3DC1F74794F97BF52ED8A7E4
-:10AB1000E7F79EED0FF7B0D27DE90FF7B2FE226B9B
-:10AB200000B68BEFF2477EF5F02F92F07DFCDDD082
-:10AB300079A4A502F249E61BF71D84252DB47C52A9
-:10AB400001F9248B53A54350DE6ACF990079242262
-:10AB5000DF7DE9A0D243404A531D95A88F9502732B
-:10AB6000099307E5C6587E29B4903F898AFAC4D470
-:10AB7000BE8AF727DBFB29DAA70CBA41D12EC69D86
-:10AB8000EA18AA786F48423017EC2FBA0E760FF603
-:10AB90005332E6DDE5BF74ECA61B687DFAD3B3F152
-:10ABA000DEBFE779FBF417CAF1F708BB293CF5547F
-:10ABB000913A37E2AE077F019DA9F4FB9ABD4F1C85
-:10ABC00072DAAFA2DF5F43AF17FC757587B104F887
-:10ABD000EB37D5F3D5FBE2CB52EAFDBDE14B0F3DA0
-:10ABE0004876862FFCDE2D35BE107227C73F564EA5
-:10ABF0003FCACE817D5B3EF667E06361E7307B4A0A
-:10AC000095BF6D88DEF1EE7AF0BFBF23133C57C7C6
-:10AC1000CFE755C1FFCB213C27CB5A7E0AF74AD15B
-:10AC2000E71ED03FE11CA893F67F398BEB4D35FB37
-:10AC30007E9A561C6A270D9F28DE2777489B15F5BC
-:10AC40004D39CAFADDA59BC3BFEF8D1F566DBF55A9
-:10AC5000EFC6F39B52D4DF7F15F3A9D81F83F97990
-:10AC6000D320EF843EAA2D7E4F0BF1D569BDC84F8E
-:10AC7000C177E6C9A43E5ABB9CCDFA9DBA3F06F304
-:10AC800059BE6DBF1F525862BEE0EF98FCFC30DE2B
-:10AC9000AF0DDFF7B86C89DF7B70EF4FFE0671CF29
-:10ACA0003D04F3372F5A19DF2F68FB4CA301F9D766
-:10ACB00087E14B8125A00179D25D1DEB81FCFCBAB7
-:10ACC0009566CCEB1C921BFC83B190A2FA2FEFB9D6
-:10ACD000C748F7ED8F7098314C9E76838D43EBD942
-:10ACE000D9F720BF9FB23FC6A7F90EEBC9A63A1409
-:10ACF000EA1B658CBE1701DE70B902BEF3BA9F92E3
-:10AD00001E3903FC00D60FF5D9BFBCEFDDFB41FFB8
-:10AD10003EC2E81B32E5D476FBFC30BB9D3CCAE862
-:10AD2000D248FF813EB7EA40B31EECB96BD3772B14
-:10AD3000E6CD7C53BA1E99CD7FB7A3773A3E3A85CC
-:10AD4000EE4BDD1E76CFC4A58E0178AEB537F95D2A
-:10AD5000B75D83F427EA5D1DF224C057F539710110
-:10AD60004F62C953DCE7B46ECCDF67809C5CB75799
-:10AD7000CB923D7A1B678B86D8C3C679FE354335A7
-:10AD8000FB5D4B36FF6E219FF7FE35A174302B37EC
-:10AD9000469173542EEB92402E57B2DF5D38BE378A
-:10ADA000A50CE07F5C223E3B9EBB6279C63359779F
-:10ADB000F0DC84F788A40ED286DF7728ECC8D97B34
-:10ADC000670F003DF20F6D4B8E3B813D64F7C3F181
-:10ADD000E6100FEABDC7ADAE4CF0374CE7F1FEE32D
-:10ADE000D66027F0E3E363622588DFD3FE3791B0B6
-:10ADF0007BFB8EEB5C99EC3E0891577CFD77BABFEC
-:10AE0000AD42BEA3740AC4AB17100BD89137CB4C1C
-:10AE1000AF25AF33BA14FCAE4EF227C03CE764CF87
-:10AE2000F8EF6C3AEF940D3F47BBB2076E5AFEBB8A
-:10AE30004FDF50AFEDB15F7749EC9E1207D3F76B50
-:10AE4000475F78600E9C73A376B644E7B3A47D1F7A
-:10AE5000DEC7A3B6AB7BEC9BFFA57F34D23E726D01
-:10AE600087F509BFB7DA4EEAD1CB857EF714CB73ED
-:10AE70007F63CC435DAB69BDE1A95884E3F9C70D9D
-:10AE80001EE0DFE7771AD0DE399F103CB91EEA2FAB
-:10AE9000E43B3C385A1E9EEF12F8BD4263FF00E4CB
-:10AEA0000EF9BD0EEFDDF8EC3103FECEC7CA27AEBA
-:10AEB000DB09F6D36799F6679F03FFDEB336BC0F55
-:10AEC00080A4B2EFA7717A04FAB2D3FD907F6546F1
-:10AED000BD61E58B69C8BFC4FE9D7B2C06CFC19FB9
-:10AEE0003F3C331EFC609D9ADDEC7729659307F8A3
-:10AEF000F0EA9D31A8F711BDFB15587FF9AFA6CD3B
-:10AF0000190AE3BF6F23B09EEE8E17D1FF18DADF68
-:10AF1000E872FD52473FC6077AE42CCB9B5D1CBA12
-:10AF2000AFD907FDAF21E23E4496375B244BEC7767
-:10AF30002AB7453F07FE5E36B3D76A84BF2491180F
-:10AF400053810EDD84DDFFB86D20DEB77B3E3B41D3
-:10AF5000D0313FEF28F0ED64EDABE82F31B07CBD90
-:10AF60005EEEB73C95CDCE055719BF54F84D6A3704
-:10AF70005C56D607B3DF6D2E6AB20F5D4BCBF51C66
-:10AF8000CE9A5457209B7EBFAAF5DE97DF46B83C89
-:10AF9000FAA33FC2B8874DE8A7216F33F8A9ED9710
-:10AFA0002A6390C71D5A147AEFD91D1F60FEC8D9B5
-:10AFB000976EC0DF2B5B22FBCFC23D595D66FFC79A
-:10AFC000B7D3F285C347715FD4F38D88C34B8CAF81
-:10AFD000D4C03A8642FE8AEB6FD948B78CDE4F6FF9
-:10AFE000CD47F8093F6DF7F9E8F69598A7E85FCCEB
-:10AFF0004FF42FDED3DA997EFF7F0189AF015A002B
-:10B00000800000001F8B080000000000000BAD58FE
-:10B01000096C14E7157EFFCCEEEC18AFD7EB031FDD
-:10B02000F1C1EC1A8C898D3DF8AAB1A12C36A60489
-:10B03000A17639225CCA3169C25188E3950D154A5F
-:10B040009118675B2E11C555AB88B469BBA1224529
-:10B050002D515C07901B61BA0435E0364D17052968
-:10B0600034B5E8D46DA8D5D8D8A569232424F7BD74
-:10B070007F66588F316D137557F6F3FB8FF7BFF767
-:10B08000BDEBFF3D26252A332B007E56A400D401BC
-:10B090004CD26719C0982F5199E1A5713F1F1FCB62
-:10B0A000441ED701E800B301DAE8CF6AA432B8B38E
-:10B0B000B391B631350A7C5C874C4EE31ACE3F9D86
-:10B0C000F726B86A683184E51C80C7C1FA6467B99D
-:10B0D000A01E6003FD8D473FDEF09BBBCC07B0098F
-:10B0E0007ADD50027043E8DE278900A3BDDF716B73
-:10B0F0005E5AB4C27FAB0C80E91F0893E5493DA7B7
-:10B10000530017D03AFA4C8A497DF566288BA09CEB
-:10B1100031BF5717AA00E629CC754BC6E92228A2F1
-:10B120007538AFC66B91F679D428EAB34F082F5023
-:10B13000D0EEA7A5782588C97DFB048D8F8FB277C7
-:10B140007640908E8B5786D300C6332460E94867DB
-:10B15000AB8910E2A1FF13D4532867DC0D6D7D7815
-:10B160006E6D8B10E9E376B8860DD44F00C6F5AB53
-:10B170002DC771C475298DCB96DE011CAF72AE4F01
-:10B18000DAE3E42F2902B7AF364B88F4563C88C780
-:10B19000269A477DA310170957FC6C9011F7260BD0
-:10B1A00077809008E897672CFE19D91B172B516FF1
-:10B1B0009FAC8B684FD305F40BF24DAEF825A22C53
-:10B1C00004B01FFD0BFDEED1FB7A100E79E52E9237
-:10B1D000D368B997A1ACCDB8EE108B009D2B430F6F
-:10B1E000A7C75882EBF17998E034047E1751849F09
-:10B1F000D31510E6742544385D053D9CAE865E4E41
-:10B20000D740825378341E85009D74C07F2B15C9AA
-:10B21000633B8549A4B51B21D2EB7D108703164EF5
-:10B220000FC74167148F9F168795A0E57179D3F1F9
-:10B23000282CE3F13D1D0F0FC523FA2D056279443B
-:10B24000978221125D46818B729683E222BE05426F
-:10B250009C6FFD1F71683034975631031E2D33C724
-:10B26000C5B72C3C66118675493FF52B661DB0FDB0
-:10B2700005A86778E1837EB4C76B539BFFA1608903
-:10B280008829ABC2AEC5C8D734779520FFF3D8461E
-:10B29000936F6A7E2388FC1BCA97C3AE7C8AEBE659
-:10B2A0001AB70AD0CD36855720AFA5F82AA18A0A49
-:10B2B00047A940F1B3D76FE2AF75EF53FD98475AF6
-:10B2C000915725FB640F6286F889252234202D5E74
-:10B2D000157FCB8DEB5648DAF7291FDBE5B84F41D8
-:10B2E000DCF776B7E602DA7B5832D77B709F5C9D3D
-:10B2F000B40BC7F514E4FBFACABB58F0E1E7A3DCD2
-:10B30000D32457EB9EA703E9718EA9A6279B73DB75
-:10B31000B04E8C26DC704C499E7332577B4D413CBD
-:10B32000412E05F27B816CCA19ED2B2F27BFF42B20
-:10B33000661D85EC400DE136911BEEA7F5E36966CD
-:10B340007CF5530CCE7E383594D0796586F1F10FBB
-:10B350005101DC3FA8681768BE23F55E29D5A5DB3F
-:10B360008BDE3B64049271CAF0FCCD687734043103
-:10B3700089D79125FE5B5847017D3089FE1CDF8E01
-:10B38000721087DAB01675E3F0E7364FD463912276
-:10B39000B957B85CC9285E84FBBEBBFEA664C6591B
-:10B3A000A11967561D1AB838F88D02930DC394BCC5
-:10B3B000EAB878F75F7F40FC3AEE78555A9ECCA702
-:10B3C00097BAC0478BBC8EBA61E75963BF272EFA84
-:10B3D000885FB09DD62D7D6FA884EC5A366444D327
-:10B3E00048CEC0FB05A61E565F087DC23E4B5F6877
-:10B3F00015A93803749E13631EC4AB93452EA71181
-:10B40000FF1A5375D4FFAF32C6473AAD0F79F3D167
-:10B41000AE5D965DED83A70EA521DDF5F2936BA0E1
-:10B4200092D2C1CDEBB7825FCAFF3DA7DDC97ACE0C
-:10B430007FA323D0CE0EB03F7189E2A0BDD7B9AEB5
-:10B44000038EFF9DEA4EC7D43A8F7A7DA2A465731E
-:10B450007F59FD0AA885A0BC9DD65EB2C34B7A0F6A
-:10B4600048310F43FA832ED54FBC953F70E3391E08
-:10B4700097F67A78398BFBDECEA7AF1D41DDB3920C
-:10B480007855BDEA0911EE55AFE686C8BE2A09B661
-:10B490008539DE311EC755181B0CE3E9F58C89A0F0
-:10B4A00080E7BC3E50A6620585370F86E0CF7393D8
-:10B4B000FA755AF9D42A9E6991300EEE3C057E4CFD
-:10B4C00049E81CFC715446BEF328D00AB843BF506B
-:10B4D000CE9D112146721A076BF2C8DF67ADFCF4EE
-:10B4E000E409A04CC1294599054A5992B7F1F5588C
-:10B4F000FE492DCB74CCA7A98F38F6A737049DFB46
-:10B50000F550A2A29EEAB1B93F23F4A863FD61DF22
-:10B51000CAAB14974B133BD6102E59ABAA1DF3F5AB
-:10B5200020F3FB435DA1578DE17EF8D8ECE70DF8E1
-:10B53000E5FD002222D9D764007C0FFDD138EA72E4
-:10B54000F83DC5C078C47529D7A7F81D7F3C8A93FC
-:10B550006F08601C50221542E1D43848E2ECBD8FE0
-:10B56000238F83415C4438A74931BC723C80533DF2
-:10B57000CC4DA7F9BAAB22C438EE5D6A1CC7678709
-:10B580009D78E7B639F1CED79CF816EC72E25B14E1
-:10B5900071E23B67BF13CF80EEC4AFE448A363FD05
-:10B5A000BC9E66073FFFC46AC7FA05B1750EBEFCB4
-:10B5B000F426C7FA85BD5F75CC57F5EF76CCDB7105
-:10B5C00035DDEF8BE29D8E75D3FD5E73F559875C9B
-:10B5D000DBCF3A7EFF9F7EDE37CDCFDDA81BD5AB1C
-:10B5E000777D23C7290DBF986AD6A5567149224495
-:10B5F000FE5EE256C9A7BF53B25AD228DFAD3E1451
-:10B60000B6FA101C3864F2569CA809F532D5D1EA76
-:10B610001BE1161FF2B546E43295E3FA919E96744B
-:10B62000858789E2C73861162E5F6A60E072E40B95
-:10B63000F23949DCD6EBDD623A2E6EBA178BF27224
-:10B64000494185E7ADB3E6598359D7D78652C0350E
-:10B65000058FA5D63850D346794BCC29586FBD07F6
-:10B66000F05E0E12DDCB0539160DCC749F544F8859
-:10B67000FC9EA4F17BD315A6B9896E9013C5D4BFE7
-:10B680007E92A3FD2880F5EAB6A02AFC9EC58C28F0
-:10B6900019354E8651D3D1AF87435EBABFE3DF8FF2
-:10B6A00060DD7DEE5A58AFE0EAFB0DD45FB3F439AC
-:10B6B00013D04E0710FF61E63F54837BDF6DFCA87B
-:10B6C00098FA8F474424B00E66F9423FA579FDF001
-:10B6D000920C5EA773D13EACA386A0F0FB83FE2C38
-:10B6E000E3EF818F48D8E229797AC4CDFB0E58EF79
-:10B6F000A32D165EF6FB68B375FE308AD885757A81
-:10B700004BFF158ECB9EBC517065F178E3F7A427F3
-:10B710000BBDD5C7C8A6508DBA6E218DDBEFA50233
-:10B72000F1D3F4C556B122DD98E1BE68D33D79234B
-:10B73000FC3D777FFF19B38F3C5CBECEE33669B723
-:10B74000297FF8682AEF2FC3478B9A8926E5DFE621
-:10B75000F2B744AE39E264DBFEDF3BE2EF09FD4FB6
-:10B760008E79237BC25D80F61BE7F3577E05F11BC4
-:10B770003BE7A9A77723FAED8FE4175BBEF1FCFC4A
-:10B780001574DE7FB7F36F1CDFA1830970CD4DDA2E
-:10B7900079F3E00DCE1B070D4EA7DB69BF336D2A91
-:10B7A000BD05652EF4CF049BA59E0C3C78CECEA0A3
-:10B7B000F93E1B5A9ED34C7D76A8487299B4D4E4C6
-:10B7C000F31B64935FB98AE8B8DB7B84DE99430C92
-:10B7D000420CE361330BFFF009B4BB3B47BB477638
-:10B7E00076EC9EA874613E7454195B19FA333F439A
-:10B7F0009BA47186D7BBFC4CAE6729DD3B4604BDDC
-:10B8000092612D587CB2702DDDD34766E9B7A9133C
-:10B810002F0AE6ADA57BFA8864E6C7F293C25A1DEB
-:10B82000ED58ECD7528228E74326C6793CFF82C503
-:10B830004EF17833A475693C9FDAE8DD45EF5D7A17
-:10B840006F8CA798D41F64DCBE0CA2B393B49C6A1F
-:10B85000258E2FB768AB78BC94D1FDE08407281FF4
-:10B86000F09C9040E70C7862A790CF41DDE99EF212
-:10B870002BC9BCCF57FFD213A7BAB143FE98FB69BF
-:10B880006E30C0E5649760E5C27DD92F786251D2F1
-:10B89000CF4814AF45FD7ADC787FA1F7F4759CC7DB
-:10B8A000BC1B7B7EFEC96353FC313768BE87E02931
-:10B8B00000733EF7159A6F1F1CBE4975E4B701ADC2
-:10B8C0008CEC1F16947AAA23EDBE4B12D59FC6A00E
-:10B8D000C2F7A1BEDC7EAC07DF641C67D9FF178C02
-:10B8E000D76D586CD2E9FD26682AED6F970D89E473
-:10B8F0006144F0FBDFC3EC1FDB9E78B102E9ED345D
-:10B90000B598CEB1CF453D1A498E6DB7AD4752CEF1
-:10B910007F8EEB1DF284237F6FBD74B894F264C8F0
-:10B920006DDEEF10678DECA816D9B675C87FC1C261
-:10B93000C55EBFD5F2A790177E2C887477E4DBE74D
-:10B94000DF5192F3E3ACE7EB1F90DF06BDBCDE4DA9
-:10B950003FDFDE3FDDDEF68B831C17B4772BD93952
-:10B96000C5DE8D748E6DEFD8C0FB2F56289FDDCEBF
-:10B97000F1A2844472C75FB95BACE0FEF60B576E70
-:10B98000501CB55BEF7D38EB7CC77B66E17B317388
-:10B990004A5DA75A37874FB3A9F7288FBDBFD0E5B7
-:10B9A000DC8F176601CF3B6BBD23FA297F67786F69
-:10B9B0009E4D08BC659ECDC37B1AF503ECBF54FFBA
-:10B9C000EDFEBBF79AC0E3726F00F83CE94579C021
-:10B9D0008CB7793FB0FF9F1065D8E7301E3A25ED50
-:10B9E00020C509685DBC3F8873BC2AC573DFAF57AB
-:10B9F0005BEF26B3DFD459FDA58EE490FE15E9BCBC
-:10BA0000EFD45AE7D6CB789F0952E9D6ADFF9B58C1
-:10BA1000FF5F38FA367F6FFD1B3AD0569240140014
-:10BA200000000000000000001F8B08000000000064
-:10BA3000000BFB51CFC0F0038AEFCA3330C42B3167
-:10BA400030742B33307C03E20E79841CADB02A07AE
-:10BA500065FA5F303230BC02E23740FC8E9174FDF3
-:10BA60006AC208F6525E06067520BF02482B0A30ED
-:10BA700030B001D91A40BC0BC8BF05C4CF80D84133
-:10BA80008881819D8F81C110888580581328EF0996
-:10BA9000A43FF161375F4B18BFFD8F0550F9A282BB
-:10BAA000A8FC3FFCF8F5B709E2971717223D4CDEDA
-:10BAB000AB911F1FC6EAB44F33D4C4371950F91FD6
-:10BAC00065181898E51818DCE421FC6B48F2114061
-:10BAD000B14F3210F66D3160DC01D55D66C06EEE9F
-:10BAE0001DA0FC13A07C0AD41C0004EB50106803BA
-:10BAF00000000000000000001F8B08000000000094
-:10BB0000000BE57D09785445B670DDBEF7F696DE8C
-:10BB10004216C2163A2C0A08D86C21084A67C3A0FC
-:10BB2000019A454407B5598410C822E27C3CC77984
-:10BB3000345B061DE64D147518079C06C380F35050
-:10BB400003460D1A980682A3CF2DB8208E336F9A24
-:10BB50007D3190002EAD83E3AB73AA2A7D6FA79B46
-:10BB6000E08CFFFBE7FBFF2016756B3F75B63AE7ED
-:10BB70005445359808194BC877F043D32512212432
-:10BB80002D9AD29FBF7F974EC82433FD974C48A172
-:10BB90006C23643821136D2468A275268EA11F536F
-:10BBA0000979B7460ACAD086D60B6413524AD8CF51
-:10BBB0002485D44BD7137231E7C5AA216E4224AF36
-:10BBC000972C1D4A53B78BCC8474CCDEAF2507214C
-:10BBD000CE1C0321FD589BEFE8DF64AF15FB12F983
-:10BBE00094A24EBA7C9AAFABAE7EE719BD74E55D08
-:10BBF000FC0374E5DD4A86EAF23D2A6FD0D5EFB941
-:10BC0000344F97CF0ADCA2ABDF7BCD145DBE6FF55E
-:10BC10009DBAFAD7AE9FAD2BEF1F2CD5955FB76DB0
-:10BC2000B12E3FA8F6415DFDEBEB57E8CA87841EB5
-:10BC3000D1950F7BE3315D7E44D353BAFA230F6F66
-:10BC4000D6958F0AFF5E573EFAF44E5DFEC6D65774
-:10BC500075F5C746F6E9F2B9E42D5DFD7CF307BA48
-:10BC60007CA1EB535DFD9B338EE9CAC7BB3FD395E7
-:10BC70000B3CB8B5DF25DDF7099EBFE9DA29C447DB
-:10BC8000814D889154626A26D5985A492DA636D29C
-:10BC900084E9864CFF9D64046DF074A08A50BC5BFF
-:10BCA0001968FDEF149ABE9BD3DBE91F08BD790923
-:10BCB000A1783B91754D269A6D2199E299C94C0264
-:10BCC000168A0A8E08C5B7148A771182A92B42F109
-:10BCD0006D18C5BB8819D34E914EF83D25E2C2348C
-:10BCE00035D215BFA74532304D8FF4C2B473C48D21
-:10BCF00069466400A65D22FD30ED1A198AEDBA4549
-:10BD00003C98768FDC80DF7B447230CD8CE4E1F7A9
-:10BD10009E112FA6EEC82D9866458A30ED159982A2
-:10BD2000F57A477C98F689DC89DFFB4666607A4DB8
-:10BD30006436A6D746FC98F68B9462DA3F5282E9C5
-:10BD400080C8626C775DA412D3819107F1FBA0C813
-:10BD5000524C074756607A7D2480A927F208D61BEB
-:10BD6000125983E9D0C863F87D58A41AD3E191A78A
-:10BD7000F0FB88C87A4CB3239B311D1909629A13D2
-:10BD8000F93DA6A322DB30BD21B213DB8D8ED46238
-:10BD90003A26F22A7EBF31528FE94D806F29807793
-:10BDA000214CBD91FFC2EFB9913730CD8BBC8FDFF5
-:10BDB000F3234D981644FE84DF0B2387311D17397A
-:10BDC0008AE9CD9130A64591B3988E8F9CC6F496A2
-:10BDD000C8456C776BA415D3E2C837F87D4224823E
-:10BDE000A9E07724476D0E0BFCEB05FF9FE93A793C
-:10BDF0001DE54BC46FF88EA6C446F16054B47E6C4A
-:10BE00004AB91DF24995E25512C5EF64CA0B811F6C
-:10BE10004EAC9482376751FC480D37425ECD31B944
-:10BE20004D347F176955017FFF42C276E0A77B47FB
-:10BE30009DEA1EA6F8FA6E5AA807456EF8417EAB39
-:10BE4000C29C7A03BF6D56C2F4FBC4D47D697E1BCD
-:10BE5000B4A7B43114D09B8E0FF84DD111FAB94B61
-:10BE60002101079DEA41E86114D60B99687E66318D
-:10BE7000F10EA5F5AB46996604E93855437D253E9C
-:10BE80009AFE22CB3703D2FF02E2A1F3DFCFD383A6
-:10BE9000C480E98B9914EF297DCDBCAF2FA3A702F5
-:10BEA0000AC42E1DC36174BA8BC90D5B6BA66FD01B
-:10BEB000D5B753081B4FD47F96F83E82EF813CD212
-:10BEC000AFD216AD47BF1F867A71BE7F1AEF7BBD1A
-:10BED0008132020AFF402763700BC827E2764E8644
-:10BEE0007999DDCE29F6C4F3FAD932D740A58F76F9
-:10BEF0009E419CDFCF2432A396F1978C2983B07F9B
-:10BF0000948701AB05FB9739FC45BBCF019EB4DD9F
-:10BF1000FB165F0B93A7EEEE08179BEBAAE042DB44
-:10BF20007D897051683BFBD5B74B9C56333813AFB6
-:10BF30001BE7C1BF57984840A2EB68DD620F6ECE89
-:10BF4000021C7623FF2C7171069A4A8141E57A49D9
-:10BF5000322C8190C63D492103AD9FB7C5BE19F46F
-:10BF60008096BCC0933E80F366956CA15556ECF963
-:10BF7000F9A1DFD07CDE2695500D832C487A229BD8
-:10BF800050B85D2B496CFC80776F1FDABF9F881F0C
-:10BF9000AF04FDCF27ACFF1689D151608B13E17A36
-:10BFA000BAA0A66A344DC3BBCB8A09E5E3A72858DB
-:10BFB000BB50FC5E60250AA494831B113E01F578FA
-:10BFC00058C817A467259A97DBE7E7435ED03F5D23
-:10BFD000F782A01ACDD3BF0BB7E9F31A78E1BEB749
-:10BFE0005AD4E066C4AB6E0C3E025EDE6E0C7E1C64
-:10BFF0005E0516356048457805810F382537C2A1A2
-:10C00000C4A28664DA4F0985239060C9EE87D30104
-:10C010004E0BB7595CC735E396D526EBF215F55DA7
-:10C020005CC73572F4E21BCF38804E1767185CC7C7
-:10C03000297F6B5EE64D394EB7ECFCB2224C057E93
-:10C0400094D566B96CBA7EF4F98BD55211C36FB72B
-:10C0500073DAA0C478B638C3E83A4E49F5EC362610
-:10C060006FCF2E33BB609CE6652E171B3703530141
-:10C07000AF454BAD585FCC2F51BF3FF4FC08A9230F
-:10C08000C7CCC0CF6959EFC4F513D293F2B911E907
-:10C09000A441FD12F0C64CFF7E67403CC2BCE8B72D
-:10C0A000A2560E98AE87EFDB75E3D176EE931AF9C0
-:10C0B00092986E1572528397F7430748A766DC671C
-:10C0C0003FEDD149FB6B516C6B408F9AC0F1A702D9
-:10C0D000EA517E50660E1BFDF4D3B93AB61F89C6ED
-:10C0E00039BB6C5B37E06B25E66A2330AB92DAFE36
-:10C0F00005404FE7EA56A6837C59285FFCB12F4ED6
-:10C10000FB5F08BA0DAAAD7A7919E4F3A4FDEAE859
-:10C110008CD8DAD64DF3CD063A94AD7DBFBF929858
-:10C12000DC29DF7E70DC683AFFF2FA0B4698C70420
-:10C13000C9FF2B292DBA7E09D64FFB29DD76C4080D
-:10C14000EB3BAD06AEF949D615E0D96E9EB68C93A1
-:10C15000499AF905A82249E975760EA757E2BEFD6E
-:10C16000534A9F67DE52C923741EE432AD45CB3378
-:10C1700079E95CE27300BC66D72D44FE7306F80FC4
-:10C18000C861529D0DF8718E188A607DE7C8FB8EDC
-:10C19000611AF8ED938C1C3E5495A5FCC084432194
-:10C1A000DCBA00BF32955435C983E1BB12E07C494B
-:10C1B000FA0EF94950427E56C2BE07887939AE63FD
-:10C1C0000DE34701FA07F2F756EBF9D3FCF5FAFC59
-:10C1D0003C32255DA1FC65DEE32AED91F2372DFFAF
-:10C1E000A3F07B566272773EA9AC72D1F96F34D25C
-:10C1F0007DA2F39FED224A37BABEB2573666CFA270
-:10C20000F9372526C7CE2EA3D3BF86F6D389ADBF77
-:10C210007469D0E81DD87E7DC7EA864D1F4DB03FBA
-:10C22000261F4B85FC256E251BB925557213AFBF04
-:10C230005B9DECB538A01EFDAEE1CF73D6E8D7D735
-:10C24000D1FA63D74BC863886FA5DB2613C033B11F
-:10C250001EB15F623DEA36C91B8C4307618EAF8217
-:10C26000AFB572F809BDE38B98FC3731F9EF62F294
-:10C2700002BF554EDF14EFBF9046003DB78E637886
-:10C280001236B2F30CAB678CD6FBE64AF54C9C5EDB
-:10C2900068BDEFAE54CF12ED4F31A4B5AF57F6CA1B
-:10C2A000732F07287E97BEF08483507C3CA354A74D
-:10C2B0007BE8F7455B563B004EA7958003F0E64CC4
-:10C2C000502E8A07AF510649E81B3689EE7BB9C06C
-:10C2D000FF31CB27827CFF728BEA7A84EE4BC53626
-:10C2E00053C844F7BBBC6E4131198CF9232CFFB302
-:10C2F0000B801F15F5EA51EDBE966E7D22DD6DC7F0
-:10C300007DE866001D9884BA119A96D79C18077A22
-:10C31000740569457C8E6D07E3C3D18EF2EB5946F7
-:10C3200067FB72716EAC609F4845DDCF2FC0B9B11D
-:10C33000822847B5785402B84CF5BC01067B2A9C8C
-:10C3400017C8483212F88A800309A6215F5EF9EC0B
-:10C35000AF061FA1F368AE79CB2169E04335248491
-:10C36000CBC5DA397F4DB9825C384FF1935CA36D50
-:10C3700017C476EE7A3A81CE34DBC0D2456AC83132
-:10C380009AC273D126D54331932C7AEE99DF3D457D
-:10C39000E98E7C62F2F4A5F05EF8DC814337D0FCD4
-:10C3A000C21D6A6A315B864D4A8FEE4705FD0B76EA
-:10C3B0001901FFD2170F18DD83D8F7873A45F761C7
-:10C3C000E18EBD4632A83DDCF26BF71AC3B638FBEE
-:10C3D000517B641CE8332B9FFDCA08FB7D668F44AC
-:10C3E0003A67B56F5FB2E900EA2F0027DC3FBE3F36
-:10C3F0006DFBD56E9F42135F1D8EF55CC0AF13EDD4
-:10C40000931D64F508C4E3E75FA5E397FCC9E481E5
-:10C41000F5973C7FBF03D6714AA964F8BC7175BA21
-:10C42000978E5BA206D25D98B2EF254F3F8078369B
-:10C43000FFE003A89751FCE862409911E802EBBBCA
-:10C4400077C36DB8BE79C48FF856B251F605810F27
-:10C4500028A468471C7A7881D3C3A9CD9453D2F518
-:10C460009D02FE087AEEFB32E78FF7A11EF9005F0E
-:10C470002BD56430FF8599ED5395C120EC72661D74
-:10C480009ED6FC0CF9E8D91EDECEAE810807C13776
-:10C49000919FCA070B3BB3FD61FC17DB51BCCB87F7
-:10C4A000EF50BF49F55A06EBDA717EC9C65FC2C7C5
-:10C4B000A7F3B682FE712A9DC989D8F5FDC920F877
-:10C4C0002395AF1AFCD2D035A3F39A87195D0B3AA6
-:10C4D0000F4E2E82F2CF3F64F403ED40FED07985FB
-:10C4E0003A63F9DE6912F2011309C5A3E71A95D37D
-:10C4F000B3BE9C7268D4DFE8BC15C9A9C513DA7F46
-:10C5000027843FEA25F31EA7ED34FA74058C87F5DE
-:10C510008CD1EF5951BA9DCFE9FFF740FF4951FA4D
-:10C52000271BD2AEEA7CB6480DFEEE29A0574A9FE3
-:10C530000137D0ABEA83757FB67DFFA13B295E7FD3
-:10C54000562BE854CF3763E9B464E70304F033961D
-:10C550004E3FEB5E49E2D229FD1E974EBB87FF5747
-:10C56000F8A680DBC118B8513EF8DB57DD89E1172A
-:10C57000CB072B0CEEB87C90FE7C48B2DBE39DC071
-:10C58000378167A5FF59D613F84D1B3E0A7C6BC354
-:10C5900047816FB1EBD4C32DB67C03F01B8D7EA019
-:10C5A000AE20013BDDE7D6DD329E135BDCAD8E4E67
-:10C5B00074DCD516720FE8D92D2E9E4F66F9D6344D
-:10C5C0006315F005F1BDD54266007EB6F85A1DC967
-:10C5D0001AFDF94883EC70D3F2709014C5D3AB29DF
-:10C5E000C7C5F1C32451F972845FA16CCB5C3A1CBE
-:10C5F000CE55B20774B7B9CB6F7780C9A2A5A1F7A2
-:10C60000A419F4FBBD6FCA68D368B13A06C3BCE88D
-:10C61000B95DE942E13B87EFF3691278720C5DD7AF
-:10C620009C06A617CF5DAB87C73CDB1223F019AA87
-:10C630007F46F140832FC24F50B2415F5E4AD6E23F
-:10C640007E95C6E08F9F9F77BAC81C7F869021FC9D
-:10C65000BC6180FE16733E55280F9C3483C2BDE535
-:10C660000D999868FE62834CAA609DDBA520013A73
-:10C670000EA4211E9653FE4034E7C266C0336362A7
-:10C68000FA6D7EE92FD93FA15516BDFCE9E0DFD058
-:10C69000B4F9E54FAE790DF2AF7C9CF929695F3FA3
-:10C6A0007FCFD777037F6FD963226827D9F3C7CCB1
-:10C6B0009F40FE559307ED1C2B4C5ED48FF7D8831B
-:10C6C0007DA1BC07B32FADDCFDD5E030CA9B55B8CA
-:10C6D0004F05323B475C6CF8DB7F4BA990D255810C
-:10C6E0001CDD9384FA75C5AB96201C3A5B767F956A
-:10C6F000EDB7FD70EB2937123FE29F9DCCD809F8CA
-:10C700009ACCEC6915AF8D7A66391DBFAC6EAF71EE
-:10C710000E2DCFFFC3B78381AFB4EC64FAC1793576
-:10C72000FC34F11032497E62B94AF7EB3CE86A5DAD
-:10C73000295F920FE5066CF1E0C2E0D042E100EB28
-:10C74000A27029017E98081EF3FE65E171E16E1862
-:10C750007F51C348226769E12279D9777BD02CE1E8
-:10C76000FAD9F73D5F0D06BEFB59ED7294DF1DADA2
-:10C770007B35AC3BEDFFA5754BA1AB5977CDBFEC3D
-:10C78000BA19FE0F90993C8AA583F678FECA8F31BC
-:10C79000FFBCDD83F3BD4AFA6FFC975DFF3FB8EF46
-:10C7A0003B25F4C775B4EFC7FE65D7DDD1BEBFC961
-:10C7B000F7DDEE027B6FCBEE6F338966FD1DADDBDF
-:10C7C000A0FCABF2B72BAF5BE83D4D864AD7703A81
-:10C7D000BF4F48F56D59347DCF7B29158EA3940644
-:10C7E0007CF1CE0D4315766E30819D092ADE260937
-:10C7F0007B5193CE8FDBBD04F58C89DE5FA07E403C
-:10C8000094CAA65C5ABF296F8EE711AC31F4B01FF1
-:10C81000F2D36EE479FD79EA5D897825AAC74ECC1A
-:10C82000BBF50DD0EF267965D4FF688A7ADF47998A
-:10C83000E3D8F71CFD39E28E9873C0ED33F4E5B709
-:10C84000F1FEA693C5AEE1145ED3BB2BAE2005D19D
-:10C850001DB9952AACE78EBB2452ADB157DE16D375
-:10C860009F4321DC4EF28FC16F6E1BFC16233C48A8
-:10C87000AEECD942AE027E84C1BB69DA9020D861A9
-:10C8800088E261F09B5EE6413B283F67AABCBD6A37
-:10C890005BD30474AB12FDF9529C1313C199F0736E
-:10C8A00027F6D32B0A77D52BE3B953D31FC243EC1A
-:10C8B000C7F7DD07B17FFFEC7E64C37EC4F19F2D17
-:10C8C000309B6F03FF85B99F84E7F6496B658C83C6
-:10C8D000310F94108EBE1C15FD3B270CBE6C509C76
-:10C8E0008B878D2C7F9075EB01F82CE0709C472A8C
-:10C8F00051EF2497BFFB6E0CF88D1042B4DC4BC88F
-:10C90000047A0E9937460A59E9FAE72B24E01C0A03
-:10C91000764D891CD5DA3583FA3CFCDC941EEDA7F4
-:10C92000A3FA89F8C30F9DFE95F2A3A37DE87905CC
-:10C9300052058757B4E7C47B1A181C2B1649C15EF1
-:10C94000884721D5A7F1EB7CC2F1FAAF0F0D433E2A
-:10C9500097FBCB414E3CBF7A07A0BE5FC1F5FD8B74
-:10C9600001B713EC35171B7A3BC11E73F18D7C8721
-:10C97000962F8AF4203F477EB0CC8C694B81542D92
-:10C98000C3798BB44E44395C6021C07762DBED52D1
-:10C9900084DDA592F919E98F9C0DFBC87EE6D3A62C
-:10C9A000CE4E9A7D5B3BE18C32B8FD3EC0CF518DBF
-:10C9B0009FE49F852F9C5B01AE072DE171BE38EB94
-:10C9C0007D8BC3AF78DFD746B0134C69C852012EB8
-:10C9D000530A645DDCCD7E859FA786916130AFE20E
-:10C9E0007DE31DA3605FDE903D160ADF8A860B465D
-:10C9F0007F1C7F5B2C3CA17FB00B1F533DF3009E3F
-:10CA0000C77E6121014A0FEF70FF0F2DF202FFA2D6
-:10CA10005D79C13EF6A1C2FC0AFD5566179F5A9C7E
-:10CA2000ABA6D17107D6B9868088E9CAEBF757DD86
-:10CA300058DE8DB713F5BA2E62F58E185DE5F1D686
-:10CA40003FC1C8D63F9F787E9C23FDEBED5BEE2F68
-:10CA5000EDA13C90EF0512F291F6784D903E2E1626
-:10CA6000494190BF708EC57CB184F2FF1D032B0F2E
-:10CA70004C61F252E07D2C9C2595C1598C9FA532CA
-:10CA80007C36AA0C3E02CE02BEB1F315F529BF1AC0
-:10CA9000ABB5AF4CAA1FF23CE827E50D920B4C7FDB
-:10CAA000E54AD808745851FFA80AFE823BDCAC5F07
-:10CAB000A2F8066BFDB5FD5505E7B37FE868D41F06
-:10CAC0002FAD65FAB177EE0507E841EF183CEF8D21
-:10CAD000067A7C57C678824470FC74D9B669058A98
-:10CAE000B6DF2C9CE7D445B92A98837EB468AFDAC8
-:10CAF00059834FFDD54E582EBE775DE41E0ADFE9FF
-:10CB000078388FC07F98C816DAC5C0DAA6BC245A18
-:10CB1000FEA3CA64868725B57B8D98CFC2FA623C96
-:10CB2000314E2C3D4D2B4ED2E5E7E487BB035C8AAA
-:10CB30004DA1259E3878DAA80A3FC9F794135E8A7A
-:10CB4000B783FF7F901317C679E3C06D9DDA4E3E21
-:10CB5000748E271F162F777706F82FDEDDBB331074
-:10CB6000C7E2370BD3E3C9878F96317FE0C7949F25
-:10CB700041DA328DCA87EB35F2619A05F123B6DDD1
-:10CB80004FD5AB940F62BFFE97F9CC47201FE2D080
-:10CB900075B5AA970FD31B66A17C983E4D266E8D66
-:10CBA0003DEE672AF77325940FB9E977605EF524A7
-:10CBB000C5C19B8FF8B904E00A298C0372E20F9C6F
-:10CBC000EFC7CA8B44FC7C8A51E2FEEA0EF8F9FFFB
-:10CBD00025380B7EBE989E5F400F6C8F8704F9F559
-:10CBE000E23B283F97001F193F5F7C17B74BC6F009
-:10CBF000571FF0D7E15AFECADA97FB993CA8A8CF95
-:10CC0000FAD54C5A7E67B5EA31D3FA7746F96DB654
-:10CC100096DFFE81F35B0AE74C579CFD9D3133891B
-:10CC2000B8F5FCAA0FF0A96343FE38F045C0FB77C6
-:10CC300064F4239EE072FCED217F1C0EF6F354A3F6
-:10CC400082F87382F3AFF3CB82D30A281DE7CF6556
-:10CC5000FA70D97619E1505EC7F4BCF23ED6A09BBB
-:10CC6000E6C70DFD1AFD810B77337F20055471AEA9
-:10CC7000661F17BE13AEEA06E59B24F467CEF32CBD
-:10CC8000443B3E59CFECC466FA87C57578D18E5CBB
-:10CC9000C6E1B5A06113DA9B1704F576E8B23EB79A
-:10CCA0009C81F380E0BF0BB7C5947B1E467F45197E
-:10CCB000D89B35E71099EB0FF7CAA1812F426CE79B
-:10CCC0007BEC5C15BBFFA25EDBFA4BFEC9F51FA433
-:10CCD000EB1FFEC3AFFF6AD7AD1A39BD0F25C38165
-:10CCE0003E4E18BC48EF81FFA2EBA7E3CC7DB46FAA
-:10CCF000676D9C510AA7CB770CFEAA2E50AF5CC281
-:10CD00007AF337EC38904EF3336BC91030D3CF5FE2
-:10CD1000AF978B6D72B8CE8D727666E50E69F64070
-:10CD20008037A9043C9B33D4E4077FEA414B2BF2C4
-:10CD30002F8177371A193E8FE6E31EEBDA5A80E728
-:10CD4000887AC9857411B2B0730585BF85E6F78FFF
-:10CD5000FA6A1C8737DA632AEAD9FE54D0FD00BA92
-:10CD60001AD7C0F3DB981EF6232A6FD01FD6B05710
-:10CD7000857625B47E0AF29B013A3F17F8E772D315
-:10CD800035FBB6FB08C3DB2D9287C4D9B77EF44FC1
-:10CD9000DC7DFB81F055C0E34623D7E7F9FE1DB4E7
-:10CDA00034150F433F94E4D90C951B92D18F72BC7C
-:10CDB000BA37EEE3AD1C7F63F11AF47BB7C69E343D
-:10CDC00019260EF19645168C73C3717B31FD47CB46
-:10CDD0004F62CFCD15A409F5980992FF2F8A26AE90
-:10CDE0006D3A8F3F117E5A4DBD5FA957A847325CFF
-:10CDF00006E093F78B784B881F4EC7B825FCD9DF28
-:10CE000023FBE39974BD97D6C81EF0FFDC6E701F3C
-:10CE10001A03F4FB884A002F2FBDAD7A99DE99845E
-:10CE20007C77D63BC7543085CCA23081FD9EF5532C
-:10CE3000C65F8F4167F4DB9FA8DCF282AF9ED48E81
-:10CE400080F8E1699EBD856EBA2FB70D3FB81AFC18
-:10CE50007053F35D870E017C1F9609C0F7E89A7C3A
-:10CE60003C9FDC7F9F84787D98C211DADF362DEB02
-:10CE7000D0213AEE5D6BD2D0AF36D37BA010F06CF0
-:10CE8000CE24BB0DFC6BB7F693895F03C7BB48D3B9
-:10CE90006AE0D7332BEFBB0DE65B42E500D8594B78
-:10CEA0001A0E167686FC06C9E3A6FD5704FCC6CE0C
-:10CEB000740B9BD65F3082BD631EAD07DB53B1811F
-:10CEC000D5ABA8913C16C0C7864791EFCCAB9188F3
-:10CED0000BEA537DCFCCFA0D9A69BF4D1B687B9A44
-:10CEE0009F0FEDA1DF9AE4E9E047AB785B66ED7355
-:10CEF00096BF0E7C691E6D478B4953CD7DD8DF826E
-:10CF00000D12C9A0FD95E464FD470EF4F7B6EA8161
-:10CF1000F28FF7FEDA08F3BE9B8ED785F63F470EF9
-:10CF200017427DF213C9B505ED4D2C4EB685D301E0
-:10CF3000F9B00BA32F89E7B91E28E4E107C65E8884
-:10CF40004FF3962EAF8275850369597004AAA8BF66
-:10CF50006004BDEE3885B39FEA6DC7781CDBFEC068
-:10CF6000316358C3A75A8DBDB1FDDCFA5CA4EF7BD9
-:10CF7000890FFDDDFEE54C0E1F596D094AA07FA803
-:10CF80002E9493FB575FFB24ACFFFC732AFA47CF28
-:10CF9000F708A33DF6D4069504E81C576E90916FF0
-:10CFA0009CDACEEC40F24615F3F31F30627EFF862A
-:10CFB000A9E3801F9EA2F0073CCCDF586884FC7C6C
-:10CFC000CAD74D71F8C73C7729E31731FC61FE7A67
-:10CFD0003DFDB7E3174BC631FE1EC30FCABA57A1BA
-:10CFE0009D2F964F54109BE00F4321DF14EA82F8E7
-:10CFF0005BFEB64A409F2B575C77AF07BC9969012F
-:10D000004F31A58BD001E06B9782923B40CB7F7470
-:10D01000CFAE1100BF93006FA08BB529E84F9D17CD
-:10D020009C857015F184F3D7EBF159C42FDDE1979E
-:10D0300089572B074A92885753EFE39F52BCA4E3CA
-:10D04000DD532F052D12E48FBCFEC070CCBB000F4A
-:10D05000CB977279BAD68E78FBF1BF5D580D78798F
-:10D06000F74312CE9F04FC552057CAD74B6EB063CE
-:10D07000CE7F88B59F4FDB03BE7CFC6B863F148F51
-:10D08000DD80E7E51B1E7D1DEBD7486EE8FFE34D15
-:10D09000B350FE96046482E53547503FA67200E324
-:10D0A00080F607E474C0F3F2552617ECA3C017818D
-:10D0B0007F4754E6B72766CFE0A9B4DD26A31BD788
-:10D0C0001D8B77F28C2CC4AF8AED2AE2474580E1B4
-:10D0D000D391E764C4C3FDAB6F47FC39BF454A80B9
-:10D0E0007FF9C62E807F4156DE867FCF4A1CFF180F
-:10D0F0005E9F5AC2F0311FCA01FF5EE2FA29213653
-:10D10000ADDE21F04FE0534778D74E2E25C037AA29
-:10D110001B4F8779DDBFDA82F3CEAFDA357D29D2B6
-:10D120008D8AFEF9FCAA7F4B073A9DA7B0380C0107
-:10D13000C73285C5E9B49BC7E3CB8D5DAE663E3192
-:10D14000F3D81B958B43412E425C49888EF3C7ED83
-:10D15000CF60FCDAB9DF1FC1B8C485AFD17DA7F5B8
-:10D16000CF6FB79310EAD341E42FA57532C685126D
-:10D1700025943D55737F44C45B2C7CC18EF02DDD1E
-:10D18000690A16D3F6A52F1F1B8CFEF015ADAF0351
-:10D19000FD047E2F31BB7C203C782AC4552A2CEE1E
-:10D1A0002356EE8E32317B4DF3AEA419A0FF48DB3F
-:10D1B000F6A23FA9B4F676D5A4B14F7A4C2A8E4B8D
-:10D1C000EBB17B2E74DFC18F08F39B3C483BBFE57E
-:10D1D000ACBF6719DD94D6ABA817956EDB8476BD1E
-:10D1E0008A6D1730EE35FF85E71C00878A7A591F54
-:10D1F0000FB54D0E99305E4B3E6262FC4917975455
-:10D200005EC7EE6594D7F2B89F98B898852FEC7EEC
-:10D21000394041B3F0C5AD0EA0A3B34D5B1C004F28
-:10D22000DA1FC6134DCA49106FD4519C51EDC3711A
-:10D23000E38CCEC23F2882DC6DD2C767926D8C4FE3
-:10D24000D15DCFF6C5B1670A7D65E1735F3C0D71B5
-:10D25000AFCD3B3F7B1AE6BDE8EF979E86B80DB297
-:10D26000C7E202FDA1E2F71F61FCA068B7D4C4CFFA
-:10D270003FCF6EC5B8CBF39F9850FF3BBFFB542602
-:10D28000E807E7777C9D0EF1944B7617A2FD61C904
-:10D290004BF99D499CF3AD48012F835711F719BBFA
-:10D2A0000FFBEBE4908DCEF3DC6113D2775BBC58BF
-:10D2B0006D198BBF73F338B1EDF1E36A457C537997
-:10D2C000DDD44937027FAB6372BC2DDEA9A3F8B071
-:10D2D0000FE97E5E7F15FBB69DC7FFC5ECDB39F815
-:10D2E00007DD9F274CFAF8B02FEAEEFDED535056BC
-:10D2F00017FF3E99A0E38EE025E276E798BC411344
-:10D30000D0CDCEFFC4383CD8AF6237C8F92F32C178
-:10D310006E795A6D457B60EB6E930BE2B64A777F70
-:10D320008CF471FEA58318174B78FCEC79D2F6C308
-:10D33000E21DB94DA2A2C6CEE2CA38DC21EECCED88
-:10D34000C0EF3CBE8CE1AD883B4B146FF691A91742
-:10D35000BF77C1E2E2CADC4D4680BF360E4DCA81BE
-:10D360007D3AA28BDF13EB8EEDCF057018A98D9B54
-:10D370004C14CFC7F5F1B67D627CF8FC261E47D968
-:10D38000161F4948F7A110EFC3E45D4550FA98C451
-:10D39000A1471137D9144B8FC1AB8B97EC78BEFFE7
-:10D3A000183CF69B98FD49C0A5F9727C7EFC19A734
-:10D3B0006F7A2E396BD2DC4BB9879F4B441C9998FE
-:10D3C0006F552D93BBCDDB985E184BCFE5DCDE1E91
-:10D3D0003BCED77C9CF2FABD8381EF34EFDBC5F105
-:10D3E0008DE173F9F623C600E7CF412D7F86FEE27B
-:10D3F000F013D9CCFAA3E7D8B8FD556CBF10B7BF6E
-:10D40000B38AF77698FFD926A6679CAD958B827173
-:10D41000FA3FC7E54FDBBAED463C57C90E2BF29FEA
-:10D4200025F69CC3CE54488D18BFB072398F77F85B
-:10D43000A92703E0BCD27E0B81F9AC06F868CE992F
-:10D44000AACB4F40CF51337CC3E1FC24E62BCA8DDD
-:10D45000A90612D4EEBF12C0FB91137B7DA5807C80
-:10D46000695AA6BFD7D1A4B80EA4D0FE9A0A240F39
-:10D47000E8B3EDF14CDFFF64AFACB38781ED19D6B3
-:10D4800075D163C0FDB41B422E5A85D82D4D197835
-:10D49000907313B7928E21DDE8DF7E64D9B61E70DB
-:10D4A000CFCA413C1294DB3D6DF75BB03F27898DBD
-:10D4B000B3261FF6C926FC0A3094BBF6825DC2DA99
-:10D4C0008FF483FB3B2E62F5C0FB0AEBF8BDC7B5BA
-:10D4D000763FCADB8474E361F75E849DC899A3E854
-:10D4E000EEC5247BF5F994987B90825FE3153A0AA8
-:10D4F000FF71FCDD87E442B67EB057F54D8FCE3725
-:10D50000398D7842503EC186F1CC361B9B9F982FB7
-:10D510009D0FF2030A26369F81E100E8E1745E3137
-:10D52000744CF0DE139DDFD198F9E9F4B83BCC5C84
-:10D530003E2844013E623337110EE78BFA38D300A0
-:10D5400081B803671B5C6939ED274B9A6482B80583
-:10D55000179C827BE37831EDBABBB4F7C5EAE11FD3
-:10D56000A3D05FD468043FBF5982E333E90CB80607
-:10D5700040509A8C008C5FD9443E84FAA2AFEE20D2
-:10D580009E3FCB6A0F62B901F2344D497217741B8A
-:10D5900042C8C36B0A0A32FA43BD5919060FE61B8B
-:10D5A00015A0A3C9FE0CC310987EC1AAC631846C15
-:10D5B000259503C0A2645EE56D7CA307E01541A735
-:10D5C0001D09781B0137B78A3C6580F0BEC2566BD7
-:10D5D0005BDE6BA67C716BAFB67C00F23500FC1B8A
-:10D5E000603C6FE32A88F331FB5699E9B893371A08
-:10D5F00090EEC6466C78FE20E14EC89F09A9B4FAA9
-:10D60000E2DC976EB3F3F07A1DF1F1AD3C1E79B216
-:10D61000DFEF81ABDE23B93C26AEF030B88FDD62A0
-:10D620009EFDA4594B871B2FCABDE8FC9E84BDA755
-:10D63000ED9D45AE5BFAD1F939371858FCACD9FFEE
-:10D640001BA8DFF721BF01AA8C25E1FB25E0C37FE2
-:10D650004EC5F98871AA76B37355D56A437005E251
-:10D66000AF5B02F916DDBF70CCFEB5B2FDAB3F82F9
-:10D67000FB57DE7084ED5FFDA6BD466E8F8773CBD2
-:10D6800056E2D901A6A71D6B661428745F524CADF3
-:10D6900055B0AF2A995E50DC1FE1FA425CB8F2F94E
-:10D6A0007504D7ADA737FF7C30E8F5CD064F5F1284
-:10D6B0008597A877C8CCE2C4A659FD0D304EC5E3C6
-:10D6C000E12A38FFBE7AFA7DF403F76DBE181A4CD2
-:10D6D000E7DB770C37A7F071B7366F467FE656C0A9
-:10D6E0006337B8EEFD2B404E268607C3EF3678D45D
-:10D6F0001D41F818204FBFEFE4F728F2EA252FC8A4
-:10D7000089141395A3347DCFCCCE31C7CC324F9939
-:10D710009DD1D9DC4B01BD386F9A01CF534E9E4647
-:10D72000D7CFE3FFCC8A4EBE88FD147844487512EB
-:10D730009C730A9CFE3FEBF1E6B1A45EB47CECF175
-:10D74000A3F7835D4FB4DBB28C78E66AEE4353FCFB
-:10D75000D9A56B57F88015ECA1A23EE065BC730219
-:10D760006D7716DAC138B08E5DC72FCA00EFABDD1A
-:10D77000D7D8EF4DCBE8787D12D38F2F97DD2B8A4A
-:10D78000FDFE77B3F03B327DC41BBDF7F777C08752
-:10D790003273D8318DEE6F79EE2523C06145D2F911
-:10D7A000D1F1FC9E89E6D174F95A1BC8E97D115369
-:10D7B000DC7B04FD2D4CBF7877D90C0FF8E11F16E8
-:10D7C000F704B83C2BE07CB7A04F6931635A9AB894
-:10D7D00031305870B959085FE8FC8A727628203FCA
-:10D7E0000B89465E32F93801F49187F36482716ADD
-:10D7F0002E5527DF6E057BB903DE05A96C84E16F2A
-:10D80000CED0DF039D34E68802EF158CCFA1E2581D
-:10D8100082F769F4E5B7C6DC139DEC9DE529E0E5E8
-:10D8200097F0FF415CE7A49C3B3C055A39A154F7B3
-:10D83000837D3EF8AD1C576F7CA00D3E3E84EB2BE4
-:10D84000160A9FEB619DB35631305D191EB1708C85
-:10D85000854BC19FE7317B610C3C6EBE5CDD98124D
-:10D86000070EEDD75DDD0FE4A6805F2C1C9AA02E7D
-:10D87000EA4DA620E8814D4A18E1D844E118E07E3F
-:10D88000ABC274CD3E8BF970FDE156FE3D169EB1E4
-:10D8900070A4FA05EA0FE307D9D10EF636C00BE300
-:10D8A00000AA3F34D1EF6FF651C923C0FB42633168
-:10D8B000CEF02682B022AF489505E8977131FF0A75
-:10D8C00095E70C1FFECCEC57C51136FF716E162F75
-:10D8D00043E17134061E4763F040776E899DE72B64
-:10D8E000F08F5171F083E3C1220B3FDF641237DC0C
-:10D8F000FFCFFE64B893F185F8F2716CC4D7D60FF0
-:10D90000D33BD8FB1C12F1B77D77D17E425E15E385
-:10D910003FF3CD2EA48F7CE24D81F72020C810E686
-:10D9200029E6354CF2FDD49206EF378D4FD1BE0F6C
-:10D9300021C617FB92CFE1974F027BE11C9A4F94CF
-:10D94000CFB5EB16FD5559B89ED593F4443F391821
-:10D95000434744FB13EB4B4921217C3F4432E33DD9
-:10D9600027FA5FC0D8293A9E881FB5DBA7545B58B9
-:10D970009C0461711221DCCF3C5E9EC7DF6922E608
-:10D9800084EFF290EF92A2F37BDA2229F86E029FE5
-:10D99000DFB937CC0188D77850F26F86719AA5B776
-:10D9A0000703BCA83E760DDED38F29BF74B8B11C27
-:10D9B000CA69BD79588FAF6BA1CCEC64F4FC8FEFD2
-:10D9C000A1B4E7E3CC9E46C94D211AFACCB332FA92
-:10D9D000BE95B8BBE37B69C4AF40DA6861F7D06E2F
-:10D9E0003EFC18EEDF5BD69BDF007A2B224105DF81
-:10D9F000F971E9F1B0433CED177BFEE5EFBA28ADD4
-:10DA00009900D77D966BFB801C13FAC2FB16DF1FB3
-:10DA100060BDFB2C8C3F1FF58E7817E4C2ECDC61F7
-:10DA20008786D3D460F6E1BB0BF7025E5178E6003F
-:10DA30005ED1B6FBA0EB2E88576F5846C0FDFB1891
-:10DA4000BC32337BDA6CCAB6601D796BD46FB4F329
-:10DA50006A8317978B1DE987A4912AF4E9F0DE0207
-:10DA6000C3CF7D165300F4B6BC87597CC41CE27F3B
-:10DA7000BA5AC2770074FAFA5C0BB37BCFFDB505D6
-:10DA8000E99C36DE50097E2E0B7FCFA11F7B77A746
-:10DA90006DBC6A4D7BD877733AE2E15CEE3F3C2E79
-:10DAA000B173CB5C4B21BBF7BB5EBDA8C5C7D8F13A
-:10DAB00013F61BD36E9FC4EC24FB5437C6838976C0
-:10DAC000E72D4C8E5F34F7DD60B8C27DF079E64E0D
-:10DAD00003959468FEA4C532239E5E20FA6B3B97A3
-:10DAE0008BF30431AF6EEC1E3D4FAC5EA11ED09F98
-:10DAF00027D403FFCC79C2F5887A60156DFF848145
-:10DB0000F9DF88E2EB3F59A30775B1327DF080CD94
-:10DB1000DBC54AD327B8DE48359CFE5A7BB5A897AB
-:10DB2000BE348F1C1B167DB74D52E80CF1DD0DFF86
-:10DB3000729043CA0C827281F29F7BE2C50BD9EDD1
-:10DB4000793D601C41970F1BDC35D52C8E01FDC043
-:10DB5000BEA5B351CF9BBAB404D396A397AF01FA35
-:10DB6000CCE3701E60E5F69324463792E41F60858F
-:10DB7000F87CAF6C073FEBC27A99FBF1D87B575327
-:10DB800027C869F0FD9859C5F3E13E3BDBEF63849C
-:10DB9000BD5B9377D0E4ABA3E965923BC1AAD13BCF
-:10DBA0002F9302CC938C74F46B8B7B8CC748169BA1
-:10DBB000EF1AE637B8B8260BE39BF7A97A3BD5589E
-:10DBC0002BD393C75AD9BECFE6EFDB019EC13B13DF
-:10DBD000B31537DA0D67478CEC7D353A0FC4438BAC
-:10DBE000BE9F22DE4F515B3F04EBEFB3C4F6A3B000
-:10DBF000FE393EC7C2FD354B7E31ACE732F14EB047
-:10DC0000221EBA15804FDEF0C6C3C0F73AE6F30114
-:10DC100009F87CC56529D413EC68752A9EDB9AB98E
-:10DC2000DE7FAE6E7FFA6C9A96EDF8C001E7C3BB5B
-:10DC3000F93E9D539AF03D8A452FC9789F9AA26F6D
-:10DC4000FA8FB0FD9C6C761F84DD6710F2EF866F53
-:10DC50007B77F7613D763F41E85DF9E64010E6B736
-:10DC60006FB98CF62A2A1F75EF9314D6B17B0BB1CE
-:10DC7000FAD812ABCAE338D93E2E71B17112D17302
-:10DC80005EC44A821A7ACE53DC0ACC3F2FE220418E
-:10DC90000AF773A737AF9B48F13C90A1E2F98F4A8E
-:10DCA0009B46D407A3FEF1467847AB91AFE740DD32
-:10DCB000D469F0EECAEBA472D5205AA720EC4F65C8
-:10DCC000C44D4F6FD9517DACD0A5D70363F5C4A225
-:10DCD000864757C11B2DCDF001C6379B30BEB89D7E
-:10DCE000FE68BE39AEDE48C8A3883F37BCF4CCAD71
-:10DCF000F02EC50D670C2E98DF34AB9BD153DD257C
-:10DD00007C37A19C84A64379799DEC0AD1560748BB
-:10DD1000DD75202F857C1770095DDE6FF6801CB0E5
-:10DD2000C8AE15B04EF36D3688BF18DD323015E43D
-:10DD3000DC3EB38AF6C93C4B5FDB1C0D3EEF4B6506
-:10DD4000EF091C48EDADFF6E5E771DC8BB5D3C9EC4
-:10DD5000ADF1E49DB630D69B9A8AFA9A90EF317A6B
-:10DD6000ACB0838DEF2BB7D9C1B4FA2F91373C6E8D
-:10DD7000A1E5B75EABE27DB88230F3A7B693EF972B
-:10DD8000FDABF83945F7BD88EB0DEDE47D14CE3AD7
-:10DD9000FDF4552BD7CFDC6410E89BA1CBEB16E24A
-:10DDA0003DDA8624D70AB433307DA6E578E9BA098E
-:10DDB000F0FD6D99D94D2ECB4847FBF62CEC19D6CA
-:10DDC000D02F9514B86F5F0EB970FE35BA2F5F9ED5
-:10DDD000B07A028877B5D7C5F79705399C425D9927
-:10DDE000FD3DD095BD8FC1CEA33745CFA34DC00F0C
-:10DDF000E07D19101B191B8E18E1DC7C8EAAE888C7
-:10DE00005F74D1805F3779C3B24B339FE356662F7F
-:10DE10009866F51E023E122079DDA872424AACDEF9
-:10DE20005C880F6F9D4C5C9BE97A769FCE93549AE9
-:10DE30001FB325CB23D1FC4E5038816FBE24072160
-:10DE4000CE6427DC67A3FD2E68AA3666D171037500
-:10DE500032DAFB1770BBF969359099ACC18F5F2638
-:10DE6000B1714FABFEDF423FA73F31A11DFCF4096A
-:10DE70006B5C797B7B12E397AF71793624C98DF99E
-:10DE800050F3ABAF77A5F30A455C4300EEA5DB2E5C
-:10DE9000C8F09ED28D5C2F2B7EBC6915D86B266E88
-:10DEA000685580EFF882AE4210B553B6795490436E
-:10DEB000D3B6FB54D8DEE97595189F34A3BEFA009B
-:10DEC000E4EF0CD562FEBA24FFDF00AE37AD69DDAA
-:10DED0000FE8D2A79A28F8BECFE74CDF4AE3F3E871
-:10DEE00015F1EC732236E71A00BFDBC67FA84901A3
-:10DEF000957EE22A363EED4F4D82FE2A5BF341AE1F
-:10DF0000652E65FD6592BDCB9DEE68BF632F3749D9
-:10DF10005A3B42DE4F16211E3DFDE0A29E60670F78
-:10DF2000FCC944FA66719A4885EFDDF9FDB270FFCD
-:10DF3000293ABF74C8C4F08698592AF0C96B66782C
-:10DF4000E4B2825EF0E3272BAD4017A93EB7511B28
-:10DF50007798B7AE78C09B80A71613DAE3BE1CC2D1
-:10DF6000F4F62F1FB505F9F97400E0AD9053B363D3
-:10DF7000FC2E513A67784FBB08C23C444AA4152E88
-:10DF8000A2CD935006CCAB4712E3633546F74C184D
-:10DF9000AFC66A72C178B3CD7D8DC097DAEC9A3C7A
-:10DFA0002E6D34D72B779FDE9702FBFAE590E5992B
-:10DFB000A02F870CBF413ED4115E3D66F566273128
-:10DFC0007D0EF57B517FD749EB409083AF097DCB28
-:10DFD00033AB27AC57B49B9AC4F4A89DDC3F27E829
-:10DFE00020B58978370D445079776AE0313189C995
-:10DFF0005191EE54DD0146472C9E73A73D64EE0D12
-:10E00000F4BAAB37E6537DC4E681F895FABE1EF04C
-:10E01000D3503A9F98A489DBBB91D37F6A532BD20C
-:10E02000DDD59E034670F886945A4E3F04F910D011
-:10E030000FE3CFA16EFC1D1EF4FB015FE0FBD34597
-:10E04000CAC03870DC67B1EE544EF7F773BA0638C1
-:10E05000407939CF8BF2451C5E85F240A7366EAC15
-:10E060009DDC5E9A41403F2C5CDA15D3724E670B03
-:10E07000CC8FA29D7441EAA3681F4DF55663BAA0E8
-:10E08000A01ABF676C9885F8B1607DFCF7C5DEE229
-:10E090007AEFB9D306F68E94C1DA15F04F9437595A
-:10E0A00055CE0FFD0F023E9CA95BF7E46077D4DEEE
-:10E0B0007BA686C9C112AB5EAF5BC6F161F7E7FB19
-:10E0C00052005FBEB4544FBC13E8648BEC5A0EFB95
-:10E0D000585328B9E3E09F16CE00D78A9A2FD0AFC5
-:10E0E0005A4EC2E8573DC3F53137F79F0A3F6BB030
-:10E0F00086F1D7D32AE3EFA7A51409E803F83BF08C
-:10E10000D9D3271EC97C10F048B2A35E037C738765
-:10E11000063F166EDF54D595FEF3A6CBECDE4E48D7
-:10E1200021362D7F167822F86DECBC37F17D1578FD
-:10E13000383A2A87362571BB686FDA6FF9A317D191
-:10E140002EFA32DFBF1AC037A0E73502DF8618D8B3
-:10E150007B697A3A1EF903F1EF5D8F3D95897687E9
-:10E160001C4AB7F0BE1AD0751CBCD8C3F1F231AB53
-:10E170007F17CC3F96DF9F91FCBF4DE91D6DBFEB34
-:10E18000E42D03666BFA59CFE1F1A5EAEFE98A03C2
-:10E19000AF285C4957D8E712BA330007B241726919
-:10E1A000E3DD533730FBFE7B9C3F88EF222FE03DC1
-:10E1B00036FAAEDC7B494CEE1B4124670499DC2720
-:10E1C000865BBA821C5F60F5DE827696470D04DFBF
-:10E1D0005195F210DF536B9E38F9ED70482DBDD08C
-:10E1E0005F42DC06F0832E78D88DE7BD15BFB320E3
-:10E1F0009E9D4862F1112B6A54C4B7336A35C6E15B
-:10E200009D3951DA13FC2D814F981C4A044F813FF0
-:10E210003B39BF1178D76B2DC3BB1AC56B05BC1337
-:10E220007254E0E7992D370F057A13EDA378E31ABE
-:10E2300022F06616FDDE6B4D5886FDA1FBD60A70F6
-:10E24000E8BDB615F957A27D137E34B17F82AF0FBA
-:10E25000B319747E03838DCD3F3581DF3F2AD7F418
-:10E260007C98EE87641BA1C77FB85A29E8A9B90337
-:10E270003AB8C7C6DE77AEFACB1CF4DF0B3F8CF0A2
-:10E280008F8AF1536C0C1F12F9515ACCFE4EB618FE
-:10E290003F9F1BF93AF39B88DF33B0780B8B63DA2F
-:10E2A0000545C02F8E5B83DAFBB9D72AC4AB0CA51A
-:10E2B000D861CBC2795D0BAC82E653971A491F7ABD
-:10E2C0007EFA72D4DE4607AD3FA1355C7C3D5DDA57
-:10E2D0002E6378DA24B0EB126F29E8136883073CC9
-:10E2E0006F66FD1257AD6E9E03389CC5BE887527BC
-:10E2F000925B89F6E31E1BF77BF1F2583A37F2F294
-:10E30000D39C8E3AA6D38013E8F42612580EF1154A
-:10E31000F4A08D71696D744A0FDED07F01EF577CD8
-:10E3200017F938745A604BD3D06924CCE894D3A33E
-:10E33000B346F5C6D34FA6D8983C72D614E6823CB5
-:10E3400071FA30AC9CFE30BA5E40E91AE83500F450
-:10E35000D919E0C9E8AC97B71AE3197BD530BDFAF3
-:10E36000CB64B6DE05377AF7C27BC80BA85E2FD127
-:10E37000AAD59CAE13C33DE494987C72023FB96960
-:10E380004C381FE4AD1BEC169DF1575BE0A68C1DCD
-:10E39000438221BAEFEECB84F189134FDDFD20F0EB
-:10E3A00087476D78AF49C89FB424FF3CC0CB44F485
-:10E3B0004CF1D20B76A7C55FDBD8F92F81DF7BEC60
-:10E3C0005203E99382785EA1C5F3B1BE5619E09A73
-:10E3D00092E4CF5093E9F836EF38730FBABE2CAA07
-:10E3E000DFD2FC4F697E2D5DC7D64E61C2F355B6B4
-:10E3F00051FFB83D2EB0F6A6D7C1BFBF25C9FBEF70
-:10E40000308F16B32F00FB7C53B75619E395AED26D
-:10E410006F5F017638BA9EA3B70DF8DD2CFA75F65A
-:10E420001DBE2A2815F6E291DC5E5CD13004EDC8F1
-:10E430001ABBF12F6D57B01B7734AE83D33DC56F38
-:10E440003CC739725A65E08B82AF6CB475E2F81C38
-:10E450002670AE10F4057C09F45A113F00F6433BD8
-:10E46000FA2382887F90770E8DF29BB5D586B8F11E
-:10E470004DDB6DB6B87C9434FCEDE507C53B8A8C6A
-:10E48000AF6EB769F48A9AEAA3E94C4F65EF92DD63
-:10E49000CFCFF2EB5678DEEB931ABDD73CCA640CB3
-:10E4A000C07B8AF460E67669E223A506296487B812
-:10E4B000BB6F6811E0D137064CD7FDBBAF280BEC22
-:10E4C00025870D9E1504E310103E393D09BEB35358
-:10E4D000CFED9CB9C76C5EF0EFB74866E49F2D475F
-:10E4E000AC01909F2D7603DAC71B779B902E2EF5FB
-:10E4F000B1723B465067EF10FE9A4B6FCF4901BE99
-:10E50000FF24F75B3E79C735687F14765945A13003
-:10E51000EF04662976EF326F6957B49B0A3B6DBAF8
-:10E520007996C4828458FF8A99AD2B5DF14B60FFC8
-:10E53000DED4417CC35F6D46A1EF1E06F8563C1445
-:10E5400036C27955E8BB421EF76CEEB517E21C7A6D
-:10E550001631B3D8A6668301D6B789A25172567B0D
-:10E56000BC12F8B3A97D1CC1099B865F4E5ECDE24B
-:10E5700008DAF2BCDD6F791CC1D8E3475FC4F7F25B
-:10E58000CCFE8F74ED0AD3ACF1DEE19EBEF4416C9B
-:10E590009F08EFA71BD8FB3BB1DF4D76CEB795CADE
-:10E5A0006E78FFE9AF3F4E72C7B1C74CFFCB6CFC32
-:10E5B0003D11B1F6B3E8F8FFEE29A0FB26D9DBFC4C
-:10E5C0009499E037EBC84F193BEF43AABF473CF99A
-:10E5D000141B4727C66BDF9E9DBFDAEA19897F8728
-:10E5E0008DF53B54D36F8E9DE93DD32582F1EDE44B
-:10E5F0005B82725AE009857B373B2DCF7EE7D830AE
-:10E600002BFA715A65E003970EF7E98EFEF304E7E3
-:10E610004D311F42FC7DE3C5694C877776E2AC6FD4
-:10E62000849DC9E7E92AF3374877F4C5F3FF748B73
-:10E6300049D2C6E567D9251D3D097BF33ECB48BCD1
-:10E64000BF0876F978F08BF5C366818F348DC1C52C
-:10E6500013079F84DF4FC0B92AD79BAB30BB18DEAE
-:10E66000434BF532FE995A44D07F3652F2223C6E2B
-:10E67000B6337D69138F7FBBF4368B57CDCE75E3F0
-:10E68000EF71A272A2D03E02E3A95E3468E2A9044F
-:10E690009E543D47E5B1CE6EC8E84A9C9B93391F16
-:10E6A00076C17B129A7AEE87800744E540F755667B
-:10E6B0005D3E73898B281A3991ECCDD0E5BBFB5CAC
-:10E6C00056382F752F72EBDA09BC13F17CF8930AD8
-:10E6D000EB76A1DDA9139FCF48C98F78037C0DECA1
-:10E6E000C1F7F27DA2EB9D037834B6287C498B37C5
-:10E6F00062BD1DADEBE83237F2C2E3CBE87C295FA7
-:10E7000098B3366B7906C2DD45E01C71729919BF6A
-:10E71000DFCBDB273F3E0BEFC926AF72A33D36D9D7
-:10E720005BF93ADCE349AE74E3BD81B9D59204E705
-:10E7300074CA67B0DDC6652E4CC57EBB68B9648BF4
-:10E74000BE239E487EADB2DB74FADE15E4D72AFB09
-:10E7500088F6F2CB60F6BC097EFDB206D90D78B121
-:10E76000B2B813C6F7AEAB65F7D9F637B0B8BA751D
-:10E77000D3991C11E39E7FC989F2E2BCF87D29DEA2
-:10E780006FD2A7A0BFFF9B74E0B39B6CFEC7EC1ACF
-:10E790007EB9AE618485BFAFAC933FF4C705F71B6C
-:10E7A000D0C726819E34648DD21BE9FE29684FE6CE
-:10E7B0008587597A039EFA3F8077482F1DFE3C13C8
-:10E7C000F64FF8EB843F4F8C23FC7D92E47F463B71
-:10E7D0007E7B7F9EDE0F253BCC18879B23B3385C66
-:10E7E0008D9C25B08F2B411FA478B6F28815E1B11E
-:10E7F000F25B466F749E2FC0388DF66CC41F214F9C
-:10E80000E93C07BF4BA2F3AC30B4666ADF21D5CC3C
-:10E81000B3FECAF38C8953E5F392ED0ACEB785585F
-:10E820003D30AF7AA3E7B01FE4EC792BDAED5ABCA8
-:10E830003758E03DD916728305DE99DD6EF337C295
-:10E84000FECB3D5A1DA067EF6F18D61FE69BC8AFE1
-:10E85000DA6CCB7B03E645D7F716F20957F8D2F30B
-:10E86000EEE8FAAEE08F7D0FDA7D8FF51FFE3EEB0E
-:10E87000AF80DF8FC10CDDA84F499CEFC6E295D475
-:10E88000B0F76B880FA2F4837199814C125C49E157
-:10E89000543588E117994BF8EFC7D1E3C1269BEFB8
-:10E8A00034AC57D0DD15E0D30CF37EDCE63B0FF53E
-:10E8B000611E70CF83F299562EAF5E341AA27A543D
-:10E8C0004A0AE357ADC904E36762FDDD76FB94AF06
-:10E8D000A05D7A3FBFE41AF8BDF09C38AE08BF10C7
-:10E8E000C63D887BA665E09785F8AD3AB559FF7BB4
-:10E8F00074F470D86EF359A1DF401E7B2F0EF06ABE
-:10E9000025B9223C1C0E84873FD941E1615729BEBD
-:10E910000050726665009C5BCC2C1E60E772068717
-:10E920009677181C761D37201E3F410620DD0D35D9
-:10E930005CBC1BFAA7FCA31BF433A6B55682F36F8D
-:10E94000E712B701F86CB7568F6CB832DEF6743048
-:10E95000BCEDE560FB703FECC3B0B7995DE60A78AB
-:10E960007B0D8CF73DE07EBD63C4D5F3178A57C39A
-:10E970001C1ABCBADAB82889DF8F8CED8F9E87D03D
-:10E980004FB0779709F951F94E761FB47CCF293CE7
-:10E990007797BF6A42A42C78D5C2EE35D4B1F2F392
-:10E9A000B9F1FDF9631CEC9C55567B9F472F77030B
-:10E9B000F8FD97DE8BAE3E72D43F9A3281DD13585C
-:10E9C0006911F1A0CC4FEAE07896D2C3E705B9927D
-:10E9D0005248F0BE80C3C6E206DBDF0760749BC608
-:10E9E000DBB95C6E09E01D7B3F200DDE8B667E6E21
-:10E9F000C417D960F580DC4F298AA9672B423F6A8A
-:10EA00005ACC7D82390EEE4735920CE023B596F84C
-:10EA1000F7805A1D42AFB3E2B94EE1F36AB41BD995
-:10EA20003B2E7633AE7B71324929C6BC82F23CB6AE
-:10EA30001F91267B0DBA7B26294556DD3B0A69BE10
-:10EA40004EBA7CE7195D75F5BBF87BE9CABB950C3E
-:10EA5000D095F7A81CAACBF75C7A83AE7E16453812
-:10EA60006DBEF79A5B74F5FB564FD1E5AF5D7FA79E
-:10EA7000AE7EFFE06C5DF975DB4A75E5836A17EBE6
-:10EA8000F2D7D73FA8AB2F27D0B35F72B0F38E2C4D
-:10EA9000F46CFB703FDE2BB29B2593E63C57CDF721
-:10EAA00023D7519401FEC755F6711970DE6C4CCE18
-:10EAB0007686E3F42BD27FF41CF6BC436F3FCBE3A6
-:10EAC000F6B3F3FB281781DF57B19FE201FE7E26E4
-:10EAD000FFF30E6E0F98E586FAFCDD0AC583EB980E
-:10EAE000EE30A35D2CB6FF6A873BEEF94936785CC1
-:10EAF000C552627809BCEC085E2FF3F9FFB3F03A17
-:10EB00001413F723CE6FB1EDCE390C5CBFF637018D
-:10EB10007F6B3BA79156D987E7B4CFCF0708F05357
-:10EB2000827A4B223D408C2F49BE4FA09F587EEAEF
-:10EB30005B3A8F9D330D5EBC8F95E8FC76CE117BE2
-:10EB40007E2B9C81FB916CD4C1E9D3363AF7EACE97
-:10EB50006FAB92B3F1FCB64AF5665CCDF9ED5307A5
-:10EB600032270A77373BC78AFD347ADCEC1EA75E72
-:10EB70007F69AF6F53F947D7B90EF43809F4B2146F
-:10EB8000A67FEF64F7FDC5B857A16F13E755E8DB23
-:10EB900026E259A3C8B85F4627AC7F5EF87E8BFC9F
-:10EBA0000FE9D74EE7F7907FEFAB1E8CEF7F7F82A8
-:10EBB0004CE0DD954B4523F19E74227CFC90DB5F9D
-:10EBC000DE7532F87664BF787F59C915EF57BC3FC0
-:10EBD0009EC5514E89795F778493D1CB2427C7078F
-:10EBE00013B3439C7BD98EF1F0E76EF9087F2FD2E7
-:10EBF000B9BA61C303F87BC03C4B206E2660B3A357
-:10EC00007D6FCAF811C397DB3578C47FDF58FE2BC0
-:10EC1000EF38C07E336547EFB4802D31FE4CE2EB18
-:10EC2000234AF81A8C977EED0CFE3E9A29BBFAA671
-:10EC300031FBA23ECE2CD6EE33656939E29BC897F4
-:10EC40004508C695B5E515769FB82CA2601C5A17E5
-:10EC5000279783DC2E94105E5709CFD8EF029EEFE2
-:10EC60008F3FC3EEC55BE2EB1B3F71EAFD16B1F7C8
-:10EC70005212DDB798CDF7E952D128BC5F3FC5E805
-:10EC8000EE7B35762A01A7A6CBA792802FEC81FBDD
-:10EC90002E71FAFF9193F1B33DDE13296096CE35C4
-:10ECA000B7E603FEE7723B789C78FC0AA0BBB19103
-:10ECB000A21F241E7FA993DBED78BC7B81D3CDFD01
-:10ECC00092FA78FC8EEE134D36C6976FD3A2F0FB06
-:10ECD00008E8F5FE8D2AC6EDCDA7730880FD6D937B
-:10ECE0008AF6B70F2E9B08F8414E6D509F8138B3BE
-:10ECF000928DBD373E4EF325E34DE8B799BF89BDF0
-:10ED00003342C65B82E07F2DD9F4403ABC1BFE192A
-:10ED1000A5DB4554699ABFF1098C7BF9E0F823180B
-:10ED20005F7D06E8997E2FF9F667D301FEBB8CD58F
-:10ED3000D70DA1E9A2ED92EE7E44698D459717F1BA
-:10ED40007B62FF8814BD37E1A6726433DF2F21AFE9
-:10ED50008745FD5D9B9DCCDE8171F0E513D8FDA854
-:10ED6000FD27D9F9FD401F16DF171A7F7BF110BA76
-:10ED70008EF169EC7D96D8784002CE31783F85C718
-:10ED8000EB8EFF4469BBC7C2CABDB642CDFD80D77A
-:10ED90009755E2BE8CFF35B39B8CCF6271ED09E3D2
-:10EDA0000433DAC5F9F703B9D92E3E307A7FE76824
-:10EDB0003CBCF9430C5DEF3FC9E201E7BDCDDEC7C6
-:10EDC000EA886F7EC8E7FDC1F101773D4FE1F1416F
-:10EDD00011E3E21F5CBE7935BE3FE39308C4659E34
-:10EDE000BA1CFF9E58B253E84DFEB6FB34B03F53F9
-:10EDF0008B16B4E5812C6FF3DDA7BB6F73F5FCE6D2
-:10EE0000CAFC64A593F91162F97B2CDEFF9FE2EF47
-:10EE100053C61FC884FBF734FD1DDEC3DFC1F86392
-:10EE20002C9DC7F27331AFD8F996450CBAB8E16999
-:10EE3000C0074668F9B911F93C55EFD9BB30D94A3A
-:10EE400070A5847A80E4A270186E0BA6E4D221FE2D
-:10EE500007B1ADBCC8008000000000001F8B080097
-:10EE600000000000000BDD7D797C54D5F5F87DF3C2
-:10EE7000DE2C496692C96412929084093B15718018
-:10EE8000B008A82F04421482032AA2069D84256C90
-:10EE90002191AAC54A9B810444441AEA8614ED4094
-:10EEA00041F95AF41B116B6C834E04115C6345C528
-:10EEB0007E15C3229B2811AC1FEAC6F79C73EFCDC9
-:10EEC000CC9B4C58FCFAFBE7173FEDE5BEBB9FFD22
-:10EED0009CBB4CAD737D82BF2F632929EC369F9D6F
-:10EEE000B1B3F87755383D611F69760E62ECD138C1
-:10EEF000BFCD990AF5DECC1CC912191BF856BDE22C
-:10EF000087FA271536B93E46BB1FE34C8C41BB2D13
-:10EF1000665EBE05EBF50D97A739F37F8C83FEB6D1
-:10EF2000DA20857A8CD99C877A3396C74C2C496530
-:10EF3000AC58F1A7E17815B69695A5503A6FF7B79A
-:10EF40001628620F5BFCE95A1E63814C8B77636E57
-:10EF5000FB713D4EA804EDD2168C6407073266B5EE
-:10EF6000B140DC00C6148D05CC03701CFF2213B425
-:10EF7000D72633B65C61AC19E686F559EF74134BAE
-:10EF800063ECD736467F81910C27C30207E28335B5
-:10EF900030CE8F4CEF8970F889E9BD705E9F30BD2F
-:10EFA00037A672DC5AB14ECDC4FCCFC58047A953F9
-:10EFB000E1E3305F4F9F83B1E923993F121E321D79
-:10EFC000E7D4A85EFE2337E5B440F9E7FB6FCE61D6
-:10EFD00090EE787848524B8CFA32FD437595771451
-:10EFE00034BDBFDA4F6912633ACEE781EA99DE5148
-:10EFF000DD1973421EE735DDE2EB991CD1CF65CEFA
-:10F0000064C253E2E55B9ABBBA193BB442752A1E4F
-:10F010004899A908DB1F0C26156DEDCBDBB90DED6A
-:10F02000F83C55A633D60DD66DD7BE6B11B03BCB91
-:10F0300070BD8CFAED689DA5024F16E6B5617BCBDD
-:10F04000816B6CAC2BF4A7E84ECC4B7AB81C4640D5
-:10F050007AB8173F5D0E74A7F86F71523B3D459625
-:10F060009FCDC5F18B282FC767592EC6323A861718
-:10F0700053743FF67394E9A598365802973861BDEA
-:10F080000DF16C662C7A2E17F8EB21D6C598DD7938
-:10F09000F812311ECC6F63823E1BFB3969F3CDC57C
-:10F0A000F4CACEAD352AD24D9C53D46F61887728EF
-:10F0B000BF1DCB597A0BBB16E07D254C763964FF1A
-:10F0C00071F400F3009C125B0F310F8C9F88F88B5A
-:10F0D00001376B32E7ABBF3356149BEF142A5F281E
-:10F0E000E6B901F8C5E40EF3CB53D0EEB9BEC8774C
-:10F0F0007EC177FA350CCA37FCD1A52C87F2AEBA9F
-:10F10000C784F4E16E667A10E121E02EFBDFEBB4F8
-:10F11000101C900F9573F0E1AA8BE4C30D7F1C6760
-:10F120008AC379FE96797B78B0DCB3D806F927E6F6
-:10F130003BBDCB21DF6D05101AD4CF5E10BF5E85BD
-:10F14000FA6B9D7C9D5D1E628BE3A076EEDA560D18
-:10F15000E5C3B885CD9A0DEAE7D6B668289F5EFA72
-:10F16000ED9A1CA4AB639F5FA33AB0FFAF65FF00AD
-:10F1700020E0F7E14E8E4336B4B40BE267B393C39D
-:10F1800057AEE38FF1FEA7089F55AD0556A896B37D
-:10F190008069282F8F29FE3FA774C37EE32707FBD2
-:10F1A000227A39BDBD74F8789F32C8BF24F95D1941
-:10F1B00099C9D2191BB1C14CF01CB1E1E15B11DE60
-:10F1C00023368CD114A8F2841652345C6795AE05B0
-:10F1D00020FFA6D34CE31FFB7C761705E7FBB19518
-:10F1E000F58801DF9D62FD9B9D5C7EFDC3129B6ED9
-:10F1F0005F6D933B9C9F863345CAD757857C4DEC0A
-:10F2000006F09877F72992AF7F717AA8DF27B4FAD2
-:10F210009D99342FE60DC0A7D99BDE23792FC79186
-:10F22000F5E66C5EB714EB65DDE1ECAF7AB05D4BF3
-:10F230001CD2CFB7711C5FDFDE1D1F5CA410FDF771
-:10F24000F75D1A830F59C86A4A270CD878AADB4C95
-:10F250004301AFADADF928F7A0CBC5C89785C91E4E
-:10F26000035ED6B53AE3915FCEA70F0E087C5E2809
-:10F270001D6E4FE67C03F25F473C05066BC11AF832
-:10F28000BECEEE3F8AF23FCF1E4CC9872AB5E7D7E4
-:10F290009B2710BEA0374FFE2CBD29F4A5D49F6D2F
-:10F2A000E5029F35427FC6D09B3FC6D29B6E16BCFF
-:10F2B000BF1FAC879D307937B2F6E32E14FD9E8CCC
-:10F2C000D7D564187F84C27C386EE289034C89905C
-:10F2D00043F3045F6F1174F0948BDD3621C63A66F8
-:10F2E00009FA3495B45A5AB09F4685E8BFFD7AB9F9
-:10F2F0003C01B998928C7CD605E4A6D25E6EC6C05D
-:10F300004726CEB3F35BFA76249261C91B1200FD47
-:10F31000E7C2474E32E143EF82A984FF80B3EA6D32
-:10F32000BEBEEDE1DF3399CF7F9843EF81F54F0B00
-:10F330003EEB082F8392393E0A93B93DB3C521EACB
-:10F34000C519EBDD96CCE13C35D9C89711F81B9473
-:10F350001C037F520E9F8CF70DC575FFFDE89604C8
-:10F36000A4238927297FA2F115E6B345B41E807333
-:10F370003EB68FD63FB27DB41E0AB70FD07CD721E0
-:10F380001D21BF211D79B89E58D7373C3F49E7253D
-:10F39000627D67E3F5625C4FF43C9D274CCAB9E699
-:10F3A00099DCEA5690FF937527A5FF386A52705E84
-:10F3B000CE564DC17939857E8CD683202E04DDF062
-:10F3C0007EB6A3DC80F1977E39351DF1BC34DF9F1A
-:10F3D0005E05F5AF71E8FE64E223BD14E131C5A11D
-:10F3E0009761FA631CC7F3A0647D1AE693851D1527
-:10F3F0003DCFB9627D00CF39D84FE22816407D78E5
-:10F40000D5197B10442C8000E60DFA2151778E44EB
-:10F410003D96B89679914E53125A9BAC906F7D9859
-:10F4200079D743BE67C063B2A27EBB435F8CE9D28B
-:10F430002F55B23B97E6B3E062EA87DBA1ACB66B2F
-:10F4400090F437F05B24BDFE5ECCE3F7C99C2FC17E
-:10F450000EB92799E3F977984A3B44F2514776452C
-:10F46000041FD652BB0BE7C3FB71FD17C1877F4852
-:10F47000267F42AFA3799E870F1F0DF3E12358FF2C
-:10F480007C7CF8A4E0C3ED22ED880F5F13707B3322
-:10F49000B943FFE3C9587CE816F420E91DF910F5DB
-:10F4A0007DA39827C8CFBFC6A2F70BE0CBADB1F8BC
-:10F4B000329A1FDBFABB40FAEFC8FE1BE23AB7FDF7
-:10F4C000D76CE77897FC0CFCB253F0CBEB825F76FD
-:10F4D000717EE17A399ABFDAF44D2B97138CD525DA
-:10F4E00020FDC879EE97FC13AFBF17C967D24F91C3
-:10F4F000F093F5FF23E8FBA848135B0F30940B0053
-:10F50000B77F45EA8DA704BF048632E217F0B746FD
-:10F51000A25DF9D209B0232167777179306275F362
-:10F52000766475A6D5254C74740CA72B5D1E01CF8F
-:10F53000D87082F1BF8885B746C49BBDBD3D1F8D85
-:10F54000AFBD623D761787C7CF9D87841FCEE3325C
-:10F550009A87C7B43C42CF2B2E45D21973417AD536
-:10F56000A85695D1BC4209E042B5C9539605EDF3C2
-:10F57000DAB7B785DBDB5C30CFAB7468DF37DC1E16
-:10F58000C62779D7ED0E90676427EB26D44F4B73CF
-:10F59000393D44D3FD06B41FFA46E0AB2E93F0B5D7
-:10F5A000D2E64FC3F96DD03C26B4EB362C732A015A
-:10F5B000C263553CD28FCDAE135FC7904359AE8B1B
-:10F5C000B3073C2E2E87725D1720877A0BFC801CB8
-:10F5D000EA85F5EDE791434304BC86BACE6D0F0C86
-:10F5E00013FD5E29EAC790434370BC6839B4D5C6A1
-:10F5F000E110834F8763FD34A73E02F1047C7A85D6
-:10F600002B42AF41BBAB30BF52B45F5167EA4DF6FE
-:10F61000338BF7C6F233C6B9EC063BE50AE13FB0DF
-:10F62000C6EFFFF6DBC18C5562119FE738314FF210
-:10F630002736D41D4843FCC39F21AEF2E062EFBBE6
-:10F64000DD116FEFA80CEDD0077FDF62417837C482
-:10F6500027F6639785C7ADFC0E083205F0F29D8949
-:10F660005289C7798D8B0632F023F20FFE90837694
-:10F67000E5C9FDDF517CE484BDAC04C7DFB18DC7B3
-:10F68000494EBF353505ED7339FE7CC417CC6BB4DC
-:10F69000DAB73E04EB3DB5CBE2457DAB32CFA323D9
-:10F6A000603E95BBCC2C48728AD9B0BE994F9799D1
-:10F6B000772D6D561331AF05447C43394BFE8C27B3
-:10F6C00009E9D6BC4B65C887CCCDCB03CCB6E82CBA
-:10F6D000F89B49434DCC13110F49D6E39927223E9D
-:10F6E0009152E432E4537D9986FA9D2677359467EA
-:10F6F000F87F6528EF3C7380219F5D35CC50BF0BB0
-:10F70000F83B91F9DCC03586FADD964D34E47BD4C4
-:10F71000DD6CA8DF6B7599A1BC4F70B6A1BC7CF7FE
-:10F72000F316F4AB2FD934DFF0FDD2FADF1ADA0189
-:10F73000409ABB039D4C631CFE97352C36D49FD654
-:10F74000327B1CD26DFFD07263BB3AF3210ECF0027
-:10F7500043781E617E0BD299C65A777606B8CF0BD6
-:10F760002ADE10549BD590DB0DF9E18B378A762980
-:10F77000FD605EAB793BD9CFACA0313F47DD4CFC9F
-:10F78000138DE74AD635C9938774A0B2A012C6FB81
-:10F790009C4DC6F60CE35DD06E8E584F345D1C61F7
-:10F7A000558F8C40FA08E8CDDDD3C2EB36B3FAC1F1
-:10F7B00021FC2EE8C429E844AE5FCE5FAEDB09FF32
-:10F7C0006139287C0BD2D98C0685AD51DAAF6F66D2
-:10F7D000E3AAA59D63AC93B1A005FDEDE8F9875CB4
-:10F7E0000E37C5AD72580EC6AD583BFEB0933C3EC9
-:10F7F000B5560D5A81AED540EF28FE30AE3F1A8E79
-:10F8000017CB2F1E01076BBA915FE23CF1D1F436A2
-:10F8100038C4DAC335A1B7918F241C255C1DDECC1A
-:10F820009874E581FF387C75F64BC2F704C2372126
-:10F830000CDF9336FF4994C3A7F77EA312DDF95B73
-:10F8400006A21EEB482F391C234FA31C83FA3958FC
-:10F85000BF3201E46212F473E0879EC86FB29E6FFC
-:10F8600041997714C84545F1FFE08A888B34EBAAAB
-:10F87000230FF035A741F5A21E3EA9D9972997D1AC
-:10F88000323DCE3454D2126F1C8F126F4AE3F6FF12
-:10F8900028002F68E3B760FCB5C86BC3798227479F
-:10F8A000714E05DC9BB309A467E353283EA2338A5B
-:10F8B000FF9D62DE1AE8AFC6F1B74BCE130F494C7D
-:10F8C00021FFC29F118FF6436BCBE967B17BADD9A6
-:10F8D00089E34CF0FB693D43708260573327C029B0
-:10F8E000225E04EDD2B1FD84C7FF9880F6F04B870D
-:10F8F0004EA9A45F3E71933D2CED83F6F67580F41E
-:10F9000097B4D7C13FEA92C2ED985CECAFCD3F12FD
-:10F9100076B5F4733AEA07EC8EDE68CF74942AAFBA
-:10F92000AAA44F5B9578EFFA18FA342F4589A94FAE
-:10F93000417FE6A5A446C4E3EE3CBD13E51DC07BB4
-:10F94000087E7738C0AE512EC8AE198EF51F4D48CF
-:10F9500024BA6EDDAD067B418353364F920BE03601
-:10F9600052E85945031DE20AB7ABB2B9FA6A03B1CE
-:10F97000BC4F128BE1A7C87424D64B89882FC619B7
-:10F98000FDD1A503F8BC8A53B83D739FB09F4AC50B
-:10F99000BA2B310E97128EC3554EE671E687A3E25D
-:10F9A00097A5290EAABFC43EB214D7B3345721BBC2
-:10F9B00069A9A218F6919253F2A9FC16D17F29F4F5
-:10F9C0008DE33DD595CFCB1DE5BF678BFAD929BC1B
-:10F9D0005FE0A43E886F8BAAC684E78C143E7F69E3
-:10F9E0003F49BE192BF8A650C8CBAB7B80BC24E6A0
-:10F9F000D2C78D86F251A29CA96BF758A17C6C2FBF
-:10FA000033433A1B857209E5BCD37CA0A57758CE59
-:10FA100017F6AEDA81E2614C3A7C8F902745CCD75D
-:10FA200019E9E06A8FF1FBD83D85C7905FC7328D39
-:10FA3000FAA1EFB91CAE09AE30BDFF3EA54D1E794F
-:10FA4000CE025F87E2FD0F1663FCE16DD5BB9EB56C
-:10FA50005FEFFD026F2B849F82FB48E87FB844DA9A
-:10FA6000BE3E87CF6B76DFFD044F0DE0097C1BB2F5
-:10FA7000B4D424E1381F301A2773A6DE84F9413E3E
-:10FA80000FC338F1D25C66F7227DF637511CC4ED06
-:10FA9000778EB240DEBD963C1566D658C031202C1C
-:10FAA000179E4EC925F8AF60354D49503F69EDD7D7
-:10FAB000AC2BF90FCE514E9443D358CCB8E646B197
-:10FAC0009E098F77D5D00F4BB2297A30C63A368A45
-:10FAD00075805CD880F2E12ADBFE814AD7B05C41B8
-:10FAE0005796FEEF9029B85169DFDE662F781AD756
-:10FAF0003F6826EB20CEC9E731DDE6ABA77A7B3C39
-:10FB0000B43F512EE5F33413D3806E6E126473D379
-:10FB1000DAA6FF903DF0C3D9B3AAB4B319F5CF70FC
-:10FB2000BFA07CAE2388FB07E58DB9018A0FCD54B9
-:10FB3000685FA3B2F13D1FE6CBF3F29C24D7121409
-:10FB4000E5706F32D11997631A3B2CE945158B820A
-:10FB5000FE270BBD20FD79D0032B1200FEE56BD7ED
-:10FB600035654095FF01858F78DBABFAF7DE03FD45
-:10FB7000DE00CA69C1004C35564271F474EAE77A76
-:10FB8000D14FE03BA61CB685C7BDA17137AD67AFAD
-:10FB900099056C404CE6917C68F36F93687F15F48F
-:10FBA000298D3BC956371AF5DC494B6B3F2FFAD7E5
-:10FBB000DB3ECA0E003D7DFABBD30E0678F84C6BD7
-:10FBC00075E0F7A30BDF77E800BF4F17AA4588CF92
-:10FBD0005B85DE90F03E22F07EB9DBB70FE17D5B06
-:10FBE000F58F83FD91719205A924EF670561861158
-:10FBF000F6C39C4D0968D1B4E52BEA530C79A907EB
-:10FC00002AACAC2A565CB0B39BFBF3B336AFB374EB
-:10FC1000F6E0F8FE561CFF28C85BC4CBD1AD8E20A1
-:10FC2000FAB3723E659BFB5BD0BEF8ACD1CA42E82A
-:10FC3000AF68CD6666E77244017AF00BBC47CF73BC
-:10FC4000E7CB09D4DFF487B9DC2985B116005CFD68
-:10FC50008DB348BE44AF63FAA79EC24E00EFE9F7EA
-:10FC60008126F7F0FA0B016FFE05F77E8DF65AF448
-:10FC70003A4B034679337599312FE560B9C037B0F7
-:10FC8000DF32B47BA7D719EB9537DE4FFD97A39CE6
-:10FC900092DF61FDC96E61870E6643502ED5D8BBD9
-:10FCA00026F9CFA1774E548381DA93B1E3D5364A52
-:10FCB0008F56334AF7A5707A9DDBF8DE5D4837F33F
-:10FCC0001A9EB3603FB5C1D1CE6150C5DA081C851C
-:10FCD000F625EE1743D329B85F0CF3ACC18964E075
-:10FCE0007EB2AF9B1BDA9B9D51FBC7627D2502FE56
-:10FCF000CCEE22FA2AC1F5F4C3EFDA3791EB39B52D
-:10FD00006BA00DC7EDEB16F27608AC4BBDF075C9D4
-:10FD1000F5C8F5C9F20A15E82C467B49DFFB84DCFF
-:10FD20009AB661C2D24C0045CDB623E41733619731
-:10FD30006B023F9A7D39D9E51A03BB9BAF53D8E5D7
-:10FD40006C0FF2ADA4B3683A2A473820133B793BD5
-:10FD50009BB0D7DBE8A7F1018287C433F0473ADFD5
-:10FD6000C70BA5E33E1ED0D1A1283A32E4A7D7198C
-:10FD7000F35F995B7290BF815E0E45C2F7ABA8F34B
-:10FD800023321DEEEE4AFC36CDA3173AA17C3AF39E
-:10FD90002D75D2FAEB082E47B5BA9DF720DF6DE03E
-:10FDA00074FF99C07B83DB57EA267DA5F7437D3539
-:10FDB000727186EA867AA52B1427F2D3D4DAFE85EF
-:10FDC000C88703984EFD4DE9C0DEAA7173F89755B8
-:10FDD0009999059465198C8172AD6CAB1AE4712BFD
-:10FDE000DD5E0C789829F05071DF73960C486756E9
-:10FDF00095733B20C8F905E04A76C0EC154DE457F1
-:10FE0000835F1193DFA41EA8A8379657B215848785
-:10FE1000CA287BE0F792CFBCCC8BF4E8BFCB615310
-:10FE200092CEBF5ED63E6E42719553BB7A907D787E
-:10FE3000CAE3E984F5FC89FC0C8DA2F987E07780A0
-:10FE400013E9A3D6450941B47FF79F01BF0E6D3278
-:10FE5000A77F8805E0D2F2AF6CDA6795F429D75313
-:10FE6000695B41F459C98C7E63293828180F2DDD50
-:10FE70009812C4FD71E8BF5F03DA151BCD64370427
-:10FE8000D8FC740674E65B62267958D6904C7E6B7B
-:10FE9000592DDF4729DB9C1C54B93FBE07E31012E4
-:10FEA0000FFB6B0B2C1984A75C2FEA35D66036D07C
-:10FEB000B7C44FB4DF377B59D3CE744FC7718108B5
-:10FEC000FC1CEA003F8722F1B3250A3F6C610A97C8
-:10FED00033B7BFD603F78D4E55C579D5187E84D478
-:10FEE000432C0B08707038BE569429CE3469DE342A
-:10FEF000C4E7E91583085FD1782AFA692AE183FD0E
-:10FF0000CBC130EE3AA51BBB6D227CBF4DE1FC316D
-:10FF1000A5E6EA22D4D76FBAB99C7917E4936E614B
-:10FF2000EC3D904F3AC8A7F7416E61FE83EA74CA70
-:10FF30007F54EDA1F4E3EADE941E12F6BCE41B202C
-:10FF4000000BDA51EF09FDF89E5BFA4177A4A3E9B3
-:10FF500050F4D3FB834C406BA98159D78CCE66EC0F
-:10FF60005ADDA8EF265F6FD4672D6667613ADA7DA8
-:10FF7000F729B4BF50E61B6EA8CF348F6502FAAFE5
-:10FF8000BD0786BF933DE7B14C047EBF695C8AA183
-:10FF9000FEA4659D0DF9636E0FB71B8BBA19BEDF0A
-:10FFA0005C7289215F7A06803010A9D94578B8C380
-:10FFB000C6847FEDE2714F71BEE49BAA219D7E0352
-:10FFC000F3FDE62D339547E343E275DA6A13F3C395
-:10FFD000D4A6AE86B541BF87EA004FD0EE8BBD0EEA
-:10FFE0008674BC74F3C07786427EFF6633C52FF7F4
-:10FFF000D7A6AC44FB68FFE6D4448C8BFA97AAC220
-:020000021000EC
-:100000008E705A5884BC2AA85D44E74E4A83562F06
-:10001000D90B3B024FC8BC4741BE679C5FF6A84165
-:100020008C5301FEB87FFFB495E2F247C16E738234
-:100030005E38AAB05A4C51B12441F9BF9B5383C8D2
-:10004000CF453FA97A3AD2D3D37162DF45A1FE8E64
-:10005000BFD763FD72A22F4F7D88F8D64AFEC0D469
-:1000600016BE3EA60CE88CF83F9ACCF4649844C5C2
-:10007000FC8FF66980A7593D9BFB85A05D496E28E2
-:10008000F5466877628399CEA160BF4EC857FCD50C
-:10009000BA8ECB11BDD3844B23E119EC87EB9E6262
-:1000A000F265A7027D1D9F11EC47F26C612AF155A4
-:1000B00034DC0F59FC04DF00F28112968F613EE3BD
-:1000C000FB6920D43250CE4C357BD3503F1D5A6152
-:1000D00026BB13F447228E0F9C4C747C48F314E229
-:1000E000BA0F2DCB6528AFE4B8652B54F23B90FED8
-:1000F000A8FE2AD50F3602937A2AB04CF1B34EED02
-:10010000E9E6D7B70FE984EB89B66F65FA15F0AA6F
-:100110003FC25E98BD4DF5A1FFC1F25AB4EB2F8DE1
-:100120005C472DDF5F48E7FDDF21E4FADCAEAFEF8F
-:10013000B39B50AE774B42BFE2D81E95E8EC58D740
-:10014000BAC1E9DDF0B8C8AB837F03F92F8A038712
-:1001500035C83F61F55F930AFDCC31ADC841FFE87A
-:1001600064E3C195C3A1DDF167CC5E1C76F6D3B321
-:10017000BA50DC5DD8D7EDE55628539CF3C9500042
-:100180009E733CF5A4B73D9B61105A7F90FB49429A
-:100190008F3B1F52D096620707399663DC622AB004
-:1001A00047A4DD7DD0CCED8292542EA7A47E5F23A0
-:1001B000F2534D9CAED9CB0AF96DF067D003522EA5
-:1001C000CF49ED4AF5DBF432AB27793503CFB1C027
-:1001D000FAE66EB20683B9D4C6897C3E8BA3873D0E
-:1001E00095EA213936DBF2CC23C843E5AC99E67DAC
-:1001F000DC1C9CD19C8BEDD7D5BAA8BDD94BF15353
-:10020000A14F6CC040288FCA05DF55D429C110F119
-:100210000DD78BD345FF0CF54C84FC6AAF578CFA95
-:1002200064BAD0A3D35954FCB5CEA8DF7C09DCA9AD
-:100230009D0DE3A2BE0CCF0BEC6380D90C7F70E761
-:10024000789AB7E20DC69847396B0DA938EFCD3CC7
-:100250000E1F3DAFE8755CE83C6778278C4ACE8B73
-:1002600018376ADE12DE14C08DC08384FB8C0087D1
-:10027000E78C4685F0F5B9B0CBE08FE2C612EFE52A
-:10028000CC371ECFD7953F04F232374C076D7AFF3B
-:10029000B920ED377CC1EA12ED40F773573F37E9DB
-:1002A000726CB7F63DF22F4A5CA11EA664C65202DC
-:1002B0007B96175D11639F21CA3EF8A5E083B3D7F3
-:1002C000068B76008FE91B543DAE9FA11EB597F6B5
-:1002D000C1CC40C08271C99922DE77BE795662BD19
-:1002E000011732DFD8F6CCFF75DE7B5285FFD4CE06
-:1002F0001EEA11D38F6AB383CEA37F3F3187B251F9
-:10030000FFB6666BA47FBED1BC1FE5BB511FF720B3
-:10031000BFA023F93A43E8E1E9A897213DBCFAF9E7
-:1003200044F4DB3F7FE879DADFB43C333D11EDE2A2
-:10033000C3ABA7AE0C004B1DDE3C95F470F91AA9B7
-:1003400087FD9648FD5EB0BAF4CFBF43FADC144790
-:10035000F1F9193BFCC2EE0679877270359777EC9C
-:10036000212E0FCB515FF5257DD50BEBDD35C3DF9E
-:100370000BE93CE23BE9B1BBA6FA87507BE60CA156
-:10038000DF05923384FA4AEA53A9673593DF9486EE
-:100390007A407DEB83BB61FD5F6E51C9BDAB50D729
-:1003A000E53831EEDF81DCFEF9F036B5C13BF7020E
-:1003B000E05D86F026FB87C3FBC0320EE7832B3857
-:1003C000DC976EEE9688FEED8165DDC8EE39B0B93A
-:1003D00007C17BDA728037D9BD1EA3DDB30CE08D77
-:1003E000763EC21BC62DDBE111F0F672782F137A30
-:1003F00067054FA7B5836BE056942777FDC5EA459F
-:100400007D7E342E948AFEC8D1E75486E70EDAEC5E
-:100410002261BF4838FF9BD53D8176543B7B669572
-:100420009561BC72D60B8E2083FC7125BF1322E030
-:1004300044DDEB89385E78FC363B66705AA41D7348
-:1004400081F899C77C742E7F5EE3EB7BD18E577465
-:10045000EED7CFB3D943C8B7E0EF9C8894E78A07BB
-:10046000651AC649BC361BD24116F3F8C8AE91FBDB
-:100470003F7E86FB3FDFF6F8FAD6F9C4CFAD3D23C9
-:10048000F7492AE343668C2FB53EA710BE2BEEC872
-:100490004FCC67B8BF5445F3B82E8DEB6345D729D1
-:1004A0006E6805BA8987F126A579F8778F93C71109
-:1004B000D7C2B88EF07CA3BF8F47D2437D6E8F1D0D
-:1004C00087AD15E354A826F23BE65AB8FF21CF7753
-:1004D0004C15E553D3B8DF3E2B8D9F9F3889F17DB6
-:1004E000E8F7E4AA04715E7914C533DBE227126EE3
-:1004F0004EEDAB3679857C25E207FBB00DCC739AC7
-:1005000055C47341C562FB5B44FB5BEADEA6FD3567
-:10051000F05C1E47BD3B6581D58BF66B609B95E813
-:10052000EEDE78BE1FC2DC491AF2D1CD42CEDE52D9
-:1005300077BF0FF731A7D425E898C2380126E2A784
-:1005400079B89F9A69A1F86989ADE51974B36F4BC1
-:100550003F78A70D96B6C8C4ED96452E46E7632EA4
-:1005600003B31DE3B17874E46CCAB9E8C7181F9EE1
-:100570008B71DA618C13D65082AB210FF0A5FC9AF7
-:10058000B4D1631FCA62EC9FCC7329E27B2EC206F2
-:10059000E9A13489E200D762BCD885A946743651F6
-:1005A0006301134F9761684DC68FC78B75DF309419
-:1005B000859260BDA1DDCC10BFBE31640AF5023C5E
-:1005C0005CAB859A90AE4D368F19FD015F9132007C
-:1005D000FDE4B98B2F6CBECFA4F968BE734DFC50FF
-:1005E0005FEBDD4A703DC0E9166072A4CF5B35B6A3
-:1005F000431DC0F187F457E9F204A8DEED9CBE6507
-:10060000DC5CE2A93F741F09DF5BC4FCA09F658925
-:10061000D8DE123B7EF4529AF483B9BD3947F0EB31
-:100620001C496F9B8D7CFA31F20BD457D0AE05B8C4
-:10063000DD22D28EE8FD43D1FF8769DCEFDE7191C8
-:10064000E355585988D6BDCD4A7894E35E2BD23D08
-:10065000693CFE26E721E999893894092407D2D11B
-:10066000A1BA1AB29B6646C5815964BC4A8D956F82
-:10067000933FA6B3985A5AA7E17C942BE3BC48D782
-:10068000B758EA7B54D9DBD793FBB125ACD9CCEF73
-:1006900013897896D057A3557B6FF4774A94782FB7
-:1006A000DABF27F31D015312C65BCC84DA12A00710
-:1006B00094CF9FC4F1FDF72949778D47BBB024D172
-:1006C000A2617A1B6B76E4E686ED92A5F930D94CEF
-:1006D000A4B2C0581DF235284F78FE7E3D8BA24350
-:1006E00022BFE44DDCB7B8FE07C03FE5978ED54189
-:1006F0005E9C7C4D94B37BA9FDC925828E03F78F48
-:10070000C5FA271F96E575BCFC3E59FE10CF3F2069
-:10071000FB17F95551E58BA2CA1FE379CBA30F8DC7
-:100720000DA03D2BF6634A8629244F0A059D952C82
-:100730000E117C4B4CAFF274240BE17D89F3D51B79
-:10074000D0C957887A4B751C72A0DEBE3C432F443B
-:10075000BB6340AA3FB913A4B32728010BCAC93D04
-:10076000C19E42AEC73C675D28E8F6B274DE9F8446
-:1007700037F493D929F5E2FB7919E735C8D04FB79B
-:100780009FD3CFF2F6F3E9FB73FA3919D58FB48B07
-:10079000EECDD4C7209CD821B7E1FCDC9CDF7B9355
-:1007A000D0AE62787E0E403F67717DCE40E87FCE4E
-:1007B000B32FE5CC88F0BBE79D31311DECA7CA33E0
-:1007C0008CD22F9A3EB678603EF3B636590AA15EB7
-:1007D00025A40511F39A2BCF8FB2166D62845E1F8C
-:1007E000D7C924CE25AEA2F9CE79F618ED5BCE316D
-:1007F000D51F5E83F19E613CFE16BDBE3CD16E1FCF
-:10080000EE23C7B0DB2776E27AF8AE2C7D02AE731A
-:1008100020CA0C480B6A62EFC3FF49F45712CFE5B8
-:10082000DBD4C10E9BE732DC47F5D7E0BDAE196BD8
-:100830007307601CF786D491B710DC3A8C8BB6F244
-:10084000B868238F8B96B89AEF00E1CD1EE9B4F516
-:100850007E1BF871631F957C062C0B6D8BAC32FFF1
-:10086000E6D8515914E7A2FCDD8FEEB83F00FDEC4D
-:100870008AE7E70CA60CB9341EE5424B6E82C90923
-:10088000F2E25677E923388F2943AE28C4EFF956B0
-:1008900047CF521E5727BAB8D5EDBB1DE905EB630C
-:1008A0005CC36FE1712EFF1B2AC5B9FCFD12FCB1C0
-:1008B000F6A92B3B71BA79A49393D25D8066B43BC1
-:1008C000E43CE4F860A8DCD10CFD1D5A9CD11FEF7C
-:1008D000CF35B8F31F26B888F11BDCFEC59897E327
-:1008E000C372FBE1F70B9D47B5C0C7C3026FBE11D2
-:1008F0002AD323FCC589A3120CF9EBC7A5303D32DE
-:10090000DE7A7D67437E72493743FD9BA75D62288F
-:100910002FB636E7555D84FD5BE970C4A31DF6690B
-:10092000E3BF3FBC05EDBA0DAA5781F5CCDAB6F1AD
-:10093000C3E150EB141E2FA5A0A787E25EC7F15CB0
-:100940001AF29EA66B91FB355FB2663ACF17B11FC4
-:1009500060D87799E3DC41E7097FA9FD9AAD9DC492
-:100960007EC0003C8A8CFAE8038AB3CDB3F3F57CF1
-:10097000F9D27E0BDD0340FD01F43D061BAAC8E75A
-:10098000018A431734ECA7FB56933A71B93C2FEB1D
-:10099000760D2C32560929CAFD42904F49401FCD91
-:1009A0004DECD2AD780E37D741E7262ACE4C642CD9
-:1009B00005E928D0F776A837675911E5E79D89A79B
-:1009C0007EDF559B0BE9BCF58B0AED1714779EB2C1
-:1009D00018ED51ACFF6B18AFF8BFC714217CE66D62
-:1009E000E5E72B8AD57FE6613F73EB8AA87DB1CA24
-:1009F0007629601F8C2DE07AB618753BE4D5C18E40
-:100A0000E5A85F554BA8E79F509E581C244F92CEF7
-:100A1000DC4CE3579EB151FB4F84BC30B7F0798D6D
-:100A20003EE3A3EF12EF073A7535DC0F34A76ED023
-:100A3000CAEC589F51FD6BCEFC8A52B9CE377AFF73
-:100A4000C58D72CC9CFA4D219E277DC3AD38C9DC83
-:100A50008892B7A7AB8624B118F2A86D9C33FC7CB2
-:100A6000B2F50C3FAF7C20433F837C3D7E618B869B
-:100A7000FB37CC6E7322BCC60FEDEF9911C147EA6C
-:100A8000AB3759102FE687DEB3A07EB7425A10511C
-:100A90005E21CFE347C9E39FDAE4F1224AA57E61F4
-:100AA000E937913D7AABBCCF2AF8E40B212F64FBE8
-:100AB00066A471C4E30B56F29FBECFF027A7433F55
-:100AC000CDF96CF216928FCD39B86FF24BCD1FF085
-:100AD0006C53C8BE6FA1F3FAE3877A4CB81F9096A7
-:100AE0002ED7C1F9F57CEB50D3F93ADE55D902EC9B
-:100AF000F7DDABAE6AD6A1BFA67B060E44B92FC701
-:100B0000ED956EE1FD3A5B7F407FAEF2E5040FF2BA
-:100B100075313A4779613B16BE338CFF55BE6C5D2B
-:100B20008FE7682A13C19F85F10B5E890B211D3762
-:100B3000BD12A7A17E782ACBDF0BE153F04AAF515B
-:100B4000E8BFE98D568DE2079DF4DEE9833A9EEF1A
-:100B5000F9E453349D49BEF42FE3FC522AE8B44C27
-:100B6000F09F5FF0D1E9AA4EC487A717C2A4719F76
-:100B700073A172E956B4073C0E3AFF23F9B218FD8F
-:100B80001EF85E7C4932F97F117C477C38F78C93E4
-:100B9000FAAB38E3117CEEA2BCE4B732C12F566148
-:100BA000474C13F43D3CD37F633ACCBFB806F81DE5
-:100BB000C6F12FCEC8433E0AD38BC5897405F49283
-:100BC0003E23826F6A9A6E62687F58DD3EA2976903
-:100BD0009046DA1FD3DBEC0F67611ACC7B7C6DAEDD
-:100BE000E1FE4989C0FF85D2FDD582BECAECA11EB7
-:100BF00068AF9AABE2BC789FEE949BEFCFCCBF8FEF
-:100C0000C36FBED95780F6C3FCC7142F6086EC0AA9
-:100C1000944783F7565922E38D379DE9C73C0087F7
-:100C2000EBCE74A7F48654FF6C8443E99949025EC5
-:100C3000FD7ED63EE0209DC797CC41AB771DEEB33D
-:100C4000C5F955C4EFD16CE67C3022BE84F1308CFE
-:100C50008BC9FD41196FB2E27E6A849EFCB756973C
-:100C600083FE4EBBB853BE711F6D6ED33F079BA072
-:100C7000FC78AE4EF1A729267F2DD2F3EC89C1670F
-:100C8000CD909FF3C0F38918EF96F0ACD7423D505A
-:100C90004FD6031C310E56BF422D0A727B2681EFC0
-:100CA0007F71BA96741C4DDFB3CF74257A3A5D65B7
-:100CB00025BD731AE89545E81DA96FA47C977A476E
-:100CC000D27385C6E556853D89CE5584F5CD041F82
-:100CD000C671596FC5DB8345EA9BF52B8721FD9FC4
-:100CE000747BF1AC4F34FDBF589D4EE76CA41E8958
-:100CF000D637529E4BF92EF5D5DA0CFF8B88F7913B
-:100D00007FFDFEF97FC1A76B34AEB7AED11C443F67
-:100D1000172E37F70BB9B9DF2037E77520F71BD34C
-:100D20002F4EEE3F2DF805EC57B20B51AE47F6F7BC
-:100D30007DC6C87711DF7BD2793CE0979A7747F27E
-:100D40007E4F1BFF5E98BC6F12EB3D9FBC3F22E4C1
-:100D50007DB47CC70B6D28DF4F6EEB43FBD3FB18D4
-:100D6000E803D47B8D099E8D42FE937E884F0A9EB8
-:100D70004BFEDF9535F54807F2FFE8FF45FE4B7A5D
-:100D800094FC22F943F24334FF487E187B3FF87FFE
-:100D900088A777F9FDA90A2DB099F60F3D09FD91B5
-:100DA0002FDBECB6AD0AF1593BBD20F826CC274627
-:100DB0003D21F942F289E48F0AC10FD3A3F861BB48
-:100DC0005AFFE03068579DE1CFC81814E68BB95B35
-:100DD000A2F542877485114336DD5DC590AE2A20A9
-:100DE0008DA42B6B07FC90937171FC60CFB8307AA7
-:100DF000EA9FF1FF9C9EFA67C4A6A70119BFA03D18
-:100E000071BAEAA33CBCCF743A0FE46C6E98DEC6AC
-:100E1000BEC9B8BDD08DDBFDE037D2BC7759B22951
-:100E20009E33F62C3FD72AE952E259DA01D3453CEA
-:100E3000615EA66F52466AD85FB8503C5BDDCD1646
-:100E4000F443A6431AA9FF3BB2776FC9B848BD9FC8
-:100E5000716176E2DC0C7EDFFD17B4137F83F088CE
-:100E6000C62B73BA0C7108D07FD791FD16D2E888D3
-:100E70004C877EC56A0E67995F12D2A4BE4D417D34
-:100E80000BF4B200C7FBB9F4525CC0443C70D738D5
-:100E90007D04E0FD0F22CFDE1A877C3869A82CDFA5
-:100EA000BD42D750EE301947A7B8C8BBAAC807DE65
-:100EB000786B14AC7FEC832C1C6787F2D12392DA19
-:100EC000E2280A0BD77FF4B1D7DF5A4178E6E75E14
-:100ED00098BF45E3FB4C229F077947447E68547EC8
-:100EE0002DAF9FA8B5307E4E31C8F955C5AD374EF0
-:100EF0003FBE087B04305988E709C66F559C180728
-:100F0000B979C449DA8F0DAFFF9FE3303E3BAF5153
-:100F100011F90FDFC2F5DEBC95E7B73DF6AF15015D
-:100F20004DF497467132FA33D72B3A9E7F983B5453
-:100F30000976CD6D0FE76D1946FF06FF34637B869A
-:100F4000E7EF2EA63DE299DA77A5F621EB458C7FF7
-:100F5000E388D8F712DE96FC25E209D43FC0F2BA46
-:100F6000FAD8F7243E10F59B71DF84E0757205D244
-:100F70004FB345C2F3AB1508CFD18CE73F7BECAB49
-:100F80007181BE7CFA7AD4FACF35FFA60CA3BD805E
-:100F90007F1E63FBD0B9E0F77ABBF6827E661AE962
-:100FA0002949F3ED380DFD2481FF8F76F13C5FDC9C
-:100FB0000AB4FFC3F4F11FA28F6619CF6F47FFDF9A
-:100FC0008D1B6527FB47D4FF6105CA379FA9AD3E3E
-:100FD000E707495FD0BE377F9F8DDAFFE7B1EF5754
-:100FE000207C003F544E79ED1CFC501F951F11C50D
-:100FF0003F82FE897F51CE037C7AC49033E9999C6D
-:101000003EBE14E7AA9B47723BB159DC9B1A9AC9B2
-:10101000ED424F2687636F51BF393E020E1178862D
-:10102000BF10FA2111EB2638DDE496EBCE2A1ED74D
-:101030001DDABB78F980CCF4070259E17C747F7922
-:101040009959C5185F0DF79FF936C2F52601B7A16A
-:10105000999DDF0E7079A8205F561081005D6C5558
-:10106000022AFA09481731D6CD32DBF15520AABD44
-:101070006E3E477B4BFBF67A547B66CEBB98F602FE
-:101080006FE3A2F05A1485D75151F912990F1AE45F
-:101090009F948B650DAB96A4B9312EA9D09DCF300E
-:1010A0003DFFAA18E9798E53D2EF2504D7303DF7DA
-:1010B0007D1BE5FFC47A290F2F7D4007BC4D407989
-:1010C000382C9CBF0EE505E5FB15EB4991FAE2B221
-:1010D00007507EDEB84CD6F752FD9B6B657FFDA9AD
-:1010E0005CE291050614135EF384BE080C7C1BCBF6
-:1010F0006737F2F673D6E4BD1DE87E0E7EA88B82BC
-:10110000CBDAA87C20AAFE43E7D12FB551ED1746D4
-:1011100095AF88CAAF8ECA2F33B62F9DA6101F96E3
-:10112000023D2022CEC797F764B6D9A96DFA54B113
-:1011300093DD66E0ABB1353CBF644D7EF1B2BE11CC
-:10114000F9CC82E248BE90F77BAD6E467C61EE4002
-:101150005EFE3AB30379D93B5ADFF2F2CFF09F1922
-:10116000B4BF63B00BB6ABC67C932AE73DE1ED3B61
-:10117000EC11FBA0CC578CFE41C7FB2DE38B474500
-:10118000DA2581E262A44BB94E59BFF0C7B32A8E6B
-:10119000F7A7CCE2E20DB89F3352EC43BA780A7A53
-:1011A0004D45BD5929E23185783E16EBC5877ACC8D
-:1011B0008FB443587D4F5C67D33DFCDE40A006F002
-:1011C00083F135E6B5603CA5292969C193507FFBC1
-:1011D0003DEA02D4A3FB16A4D0B9A43399DC5FD8AE
-:1011E0009ED4256D3AE49B126EB3E0FDE4A67B47E6
-:1011F00053FAAAAA2F6D055E7B694D49B1BD0F96C2
-:1012000027117C5EC89C5CBC08E8BC012FED407BCC
-:10121000BFCB9986F71AD87233E3EFE5789F20BAEF
-:1012200079C0DA1FFDE7D24597D0BE55D9C3130A5E
-:10123000E9DEC21233ED67C01F9D3FF12F1F4DE75E
-:101240009EA6D58A343086D2577EFA4B4D22EEDFE9
-:101250003FAED07D892BBEA97F13DFE5295FD6CDB8
-:101260008BA87919EC7A3C8F7460752FBA2771308E
-:10127000AE8ACE7D427D86F5CB7FF0BC333E0FEB50
-:10128000AB4E3C5A7118BEA33D7CF83E75BD82F34F
-:101290004A74C4E379E9C33F7ADE41BB16CA9D8B29
-:1012A000E1FBE125B3D2D0CE3AAC78121558FF0756
-:1012B0006B6617A767E0FD7AABC0E76C4729ACBF48
-:1012C000D4D4462FA43F6624F3FC0799B38B37C2CE
-:1012D000FC0F3FD68BCE7D8DEBAC7F980970CAC8D2
-:1012E000D23FC2F4A0B877FCCA4F7CBFF01F27CA18
-:1012F000D2305EB75FF0CFCB67CAD2CA22EC9D195D
-:101300005F6A84F7572C9E3B709EAFC4672B743E78
-:101310009BD5A760BC7B9AF03F807E173C1FC3EE35
-:1013200069CC54A9DFA6FB5347205EC3747C37C940
-:101330004FF21B207F6ACD9DA4D70E5917B083288A
-:10134000B7C4F94586AF0D21FF6D8E0BC6E562FC73
-:10135000532FD4C98FA9EF39D111C177A2FEA701AC
-:101360007E3EF753A88FFEDBA781FF7144EE43C892
-:10137000FAE5898E001A13471C0E0DF1B04FAB3EF3
-:101380008CE7FA663C6E26B93FE3F1D485AD286F51
-:10139000805E303E16BDAE2B3B9B793CA2233E0CBB
-:1013A0002C35F2215B7A4E3EB4FF69C939F9B05C45
-:1013B000F829858F9BE99C7AF9208786FB8F231F6C
-:1013C0007F6D23DD5BBD3D6E00DE4F287FDC4AF87C
-:1013D0006A7138024EDC1F4D7468C9906676E6F873
-:1013E0001DDE99F34D81CA34DB004AE95E82DCD709
-:1013F0003BB6E0C147F018E571169C3404E0770A6B
-:101400001106703925EF6545EDF355EC7EDE92CF80
-:10141000CEB1CF779EFD3DBCF18C7C78A1FB7CFDED
-:101420003B8B73AE6DFB7CE69EB88F582EF6F90AA7
-:10143000D6F2F35BE50BF83B1C05293CDE7BA83AB2
-:10144000808FDFE27A034EBC9FFB10D72FE54C095B
-:10145000DAE09F63D6DE4EEF933E2DE44A29BEA329
-:10146000D517F9C59B837EFA8CC7E308AEE54FCC50
-:10147000FAF03168D7B2A8D81DE9178FE96C9670D9
-:1014800065784F57F67364D1EF7290EE0BFE0CFE49
-:101490002DDEF74B66CFDE948B78CAC8C1FD485964
-:1014A000AF7CF13D3D793DF08FC10F2EBD4FE5F78B
-:1014B000A65FB092BE031E4F6711F799A7D5EEB68F
-:1014C00058FA86EF7F1D803C5EA98FB80766417889
-:1014D000C97B49F8973E58D8DB1E921FF4BE70892D
-:1014E00049A1FB4B20B9E8DECF9D9DF97EE1ECCE12
-:1014F000DC8E2DCDF1D2FD978A9556EFE25CDE4F62
-:10150000DBBD6A3CE7646A9E41FB8F7FB3525CA4FB
-:10151000B2364E8F4BE4E722B6F4A573D19A05F7A5
-:101520004D3C5C4EDC29E8AFD233610CD20B94EF1A
-:10153000D5F01C9683CBC38A64F1FE1BB437C13847
-:1015400027F15FDD78BF19FD22C657C477E8C7933E
-:1015500018EE7797892DC3B80BD6EFD30FE19832E9
-:101560006932CEEF1995F81816BF7228DA77CFA82E
-:1015700003D1AF2DBD6F7BE16ACC3FD71F6F2CB07D
-:10158000D267DF277D3147E0BF459C072B833CBEF8
-:10159000AFB6B233D7F77E95C77B560A38493A9033
-:1015A000E515F7F1F350154BAC64BF542CFA88FAEB
-:1015B000AD7034A7A1DCAD78C14CF7985789799705
-:1015C0002DCA1EB117E8AACC9C44EF48CF0D145B7E
-:1015D000303FB74EA17CB85D6A0ED2E917B52F2611
-:1015E00022FD1C8C0BF5403DD47A7B9C17CFE1C9C2
-:1015F00078DB17B53DD6635C669AB3D981F791A6BF
-:10160000DDD1CD85727B9F3364C1F27DF5B926CCE7
-:10161000EB4EE708CCEBDA6594FF429C3BA13FA47C
-:101620001785E379EEE6ED96AE30DEDF047D7CF9DA
-:10163000CCFB3D514F55E434F7447D0274D0B333B5
-:10164000C2F96985F4F0BCCDFC9CBAA48379480743
-:10165000C077B3051DCCDBFAE26F901FE621FE07D1
-:10166000B4A723A0D31DF47DCBBA42C6DBEF403A2A
-:1016700091FA0BF2B56617C6DF441EC6C1FC8B0893
-:10168000CF542A1FC5CB037DF939B7163AB757296E
-:10169000EE2BB6C9A70EF0BC47E0B16C9195E4ED16
-:1016A0001E81E796FB5E48443C7EF9CCF69DB84F20
-:1016B00052B105B4B427065F08B854221C12691D44
-:1016C000645754E2BA13C37068A37FC18F958CAF7F
-:1016D00053AEBB52137090E5A2FD07826EE6320155
-:1016E000B7ADBD38FF097E437EA67776C4FAFC2EDF
-:1016F000E37BE2DF89F51D147A612ED005DECF622F
-:10170000783D51CA0928FAF2B97514F791F892F3A5
-:10171000B66779A4BCD3935D613CB69862BFA77CE1
-:101720005AC06FFF924E390D00B72FC0BFA273038E
-:1017300040AF5AC478926EE478057F9D700DAE1765
-:10174000FA0F61FF72DC7D81040DFBD9C7387F2061
-:101750007DA2FC947C595033E59AFE78EE37F0A5D3
-:10176000A35B5F5C2F1FDF9EC5CF2DEB6827407BFF
-:10177000BD41A1B8F37EE1CFEF5FF2626259049CF4
-:10178000E2B338BD4B3AC33F8C47C9F9EE72F1382A
-:101790006EF4BCA51C92F32EB8F7C66BF0BB9CBFD1
-:1017A000A457499F128E924EE5FDB7687A255A9349
-:1017B000FA5335C87BD28F63B2BEB6F8EDEDBF47A2
-:1017C000E7A51D74509CDF6E4D653C5E5F9BBE239C
-:1017D000F2BE0FFCD923F54E843E59A145E813A96A
-:1017E000FF2BDD3ABDAF322F8B9F2B39CEEA2DF97F
-:1017F000D0EFDCA3CD85899EB0DD79C5372115DF1B
-:101800003599BB959F3F93F09E7B6207D17D85B84C
-:1018100097547ADFFBC54390BEFFCB4CFB31A54B01
-:1018200046D3FDE3591BA70E46FAC1FB0C28CF8F08
-:101830006D1834903FCBE54C9B84F71A363C38E961
-:1018400066F83EAD41F5925C877E905F4BEF1CC819
-:10185000905E0EC6B5140F437BFD6ED589F6FAF087
-:101860008D831662FDE18E2EC9B81E7D430AE57593
-:101870002D89F482B473E5B9BC1A33A787C9599C82
-:101880008FAE6D4B399D15D4D4F4C4FDF3D675716C
-:10189000F49E518945DCE3DCD689FC894A0B5E293C
-:1018A000A47BA16487CDB4305B063FEF6CCB80EFA7
-:1018B000BBCDCD77A2FED87DA7A33F9DAB577F18A8
-:1018C0005CC6ED67BE5F98627C3F48CEE346317EE2
-:1018D000747FB2FD2E71DEF8A098FFB1DAFF9A8412
-:1018E000FAEFD8A61E2E5CF7916D71740EFF48D4E6
-:1018F000BB8C177B4F0BE836EA1ED4627E6F20CB81
-:1019000068BF493A3FEF3DA54FDC51FB01E73E5F21
-:1019100074A29AD17DEA4BC1A7C0F6A3127E7C1EA9
-:10192000CFF5CDA8B33AF13ECB21A47B3ACFA3F2B9
-:101930007BB736CE07879EEB1F44BF71C627FC7E60
-:10194000D18E55F7D2B982E96057E251AA363BF9F8
-:10195000A15593900D4E79FD4B33A0DDA94DFC1C94
-:1019600044BB770B763FBF33F2DD828BB58F2FD42C
-:101970002E96718587B38CF7C0245CA57FF40AE0AE
-:101980007FE880309CBEAA9E4976F1896A3FA527F0
-:1019900095FD2B8723DD3A92E8BCFE3F1A1E54F1D9
-:1019A0009D958AADFD7F40FF76983DC989FCFA552B
-:1019B000F502DAEF3C515D4569F8FDDC20A5576C76
-:1019C0006DA2765F350C6CC47BAE2FDB9384BC8F2D
-:1019D000DED7E178ECE8FEAE5CD7F1BB393EE5BC82
-:1019E0008F6F9A9A88EB6AFA534AE3E588C7842492
-:1019F00027DA77E5E29CC7E1D5DC7E3E6A4B7A7256
-:101A00001C9E0F597B5D1ABE8333BDE9FA49F87DF0
-:101A1000C636C58976BF77DB8444F4433FD75A1274
-:101A2000F15ED3E7ABE57DA820BDD33AAC88D1BE4B
-:101A3000D3B090C63CB97C8B19E9E4F2131ADD3BB4
-:101A4000FD02F7A330EEF1433CC53D98D8679AFEFE
-:101A5000128F97B4F9B1C28F1B2ED6DD8ABFB39116
-:101A60001AFE5E30947F3FB2F6F9F1D8DFB10D6611
-:101A700027CEFBAB0DFC7D86D9E07FE1D594A39BFF
-:101A8000B87F33BB5E217FF8D826D0CFB0AE8ADBDB
-:101A9000CD3ABFAF69A4BF0228C7738D92FE66EB33
-:101AA00041A2EBE8F73392593DDDEBFAA5E8F1707E
-:101AB00096F13C661B1D76847F0127E45BA4438975
-:101AC000E7D9ABF9BEB9ABBE7F3ED293C47BF4BBC2
-:101AD00072351646F71202A6787AFF7782DD6356D2
-:101AE00060FDD7B95B46A1F89C98CDF5B85A60D295
-:101AF000F11E1AABE1F7F3DBC98F2C6E0FD56433FF
-:101B0000EABF73363F2F2CEF63C91416924DEFEFE7
-:101B100025B8FEED812AF6C76BC76B30FF09C35DA0
-:101B20007776F3028A1E5F3E5E03BA9D30D0F5429F
-:101B300057C8A765DFC7F397B9069921BF68D1FDDC
-:101B4000E347E1EFB264EBF1D911E3C87EE1BB23D7
-:101B50001BE6B133C5EFC4B4D2C2EF479D545AFB64
-:101B60002DC80DD77F4F61FBFEA184F32D6646EF94
-:101B7000C074C6F90FEA38BD255BCFE0E31ABF9702
-:101B800031B684CEC705F8FD16F8F3D9D2F0FE11B0
-:101B9000A7A73279DF6599F1BE0BF3F2FB57F21E6E
-:101BA00092BC67D4277C7F6AEDC5DC9F3A6986F5D5
-:101BB00026B5BFCFA634BE4EEF61D504584B1CE10D
-:101BC000C1787FA52281BFD337FF852F772059CDDC
-:101BD00092F60A2ADBC1E1FBFB2C9DEFFBDF29E833
-:101BE000F04835EBDE1D58F9DAE6E6440F4CF6C452
-:101BF000F8504FE46F8FD59F8FF03FB2B6266BBE83
-:101C00001BEF7D5ABDE3A0FED120BF573957D89BAB
-:101C10006C43AAE073357415D4DB95DB87DE6F184F
-:101C20009BCDF5F289DC500EBEA713C8E5FE0DD49E
-:101C3000A3F36B458BC7A462BD13CFDDDB7D3AE018
-:101C4000CD8AEFB7B9286578FFE96A3BBE854CEFCE
-:101C5000BA3195F66983FC9D31A897887ADD3335D2
-:101C60009DC7D1F9BD39892709FF76788129A03D23
-:101C70006AB23133CEBF0F5BEB447D21F123DF31FC
-:101C80009DFF028F9FCC575A6A5330FF8C42E7DF8B
-:101C90008ED8F8BD9EF67A6EA305413D73ED54C310
-:101CA000FB3CF2BDD05F3A0E343F5BC897FEAC7F81
-:101CB000E47BACE5A2ED68B5C483EF49CE4FB5D166
-:101CC000BB1DF31FEF46FA041C6116598FAD4D2161
-:101CD000FA589AAB129C6735307A77A7B82193CE21
-:101CE0002B8E6B70519A78269DBE1F7BF2CD3C2EB9
-:101CF0007F381E8A9FEA44EF47173FD56B24FFD1F8
-:101D00008176EFFFF07793ED36BA473B7F37D74BBD
-:101D1000F36F50293EC9C4FD709F988ECFBE8CE2F0
-:101D2000393E16FB1D589F7C0756379FF31D5809F7
-:101D30005FABC04FF4BBB037EC1E988E7EAA7C1709
-:101D400056BE63D72CEE6D45BF0F7B6F6221BD0F72
-:101D50003B59E77A24FA7D582D10E745FBD69C6560
-:101D6000E7EF35F8A3DF8B6DD170DD9346F0F762B6
-:101D70006F981CF12E02FCCF3CE26B92D3E611ED82
-:101D8000DE0732237D5B7DC6FA5B24FEFBB03EE7B7
-:101D90007C8F37CB42EFBC69F85E35E42789F77852
-:101DA000D18E43FBFC94CEDF95B3C6F37537B3BC3D
-:101DB00074E4FBFFDFDFA13EDFFBD3D1EF4D47BF74
-:101DC000333D70D71F0DF941CD6B0CF587EC5D6F7E
-:101DD00028BFBCE56943F9F0A35B0CF92B5AFF6EF1
-:101DE000A87FD599570DF97CF6A6A17E81ED7D439C
-:101DF0007EB4F37F0CF5C7A41F34945FEDF9C25095
-:101E00003EB6F769E37A34FF59D487C5DEEF0DEDAE
-:101E1000C633CF1FF01DE71BDD267AAF43C911F68D
-:101E2000B5A0BB1FB384DEEECE72507E8D564784C4
-:101E300088EE1A14E2F7683DA67DE1D3311EC75E35
-:101E4000E4F7BF92C0EED322C64BD66DE01086F306
-:101E500029454E433ED5976EA8DF69B2C7509EE133
-:101E6000EF6D28EF3CD36BC867570D35D4EFB24008
-:101E700037E473034586FADD96F90CF91E75930D68
-:101E8000F57BADF61BCAFB04671ACA2FD95465C887
-:101E90005F5ABFC050FFB28680A1BC7F6899A17C09
-:101EA000E0AE3A437E50F36A43FD217B8386F2CB5A
-:101EB0005B3619CA871FAD37E4AF686D30D4BFEA0F
-:101EC0004CC890CF67BB0DF50B6CEF19F2A39D1FAB
-:101ED0001BEA8F49DF6F28BFDA73CC502EED96B125
-:101EE000BDBF367E17764CB1F73F86F68191E27D15
-:101EF000E82D0ABD0F7D5B4E57F9AE684B1CBE8BBB
-:101F000018F051DCC78507FB504EE1BD6B173F173A
-:101F10005342F12337D939A48A3C784E07EC8044E8
-:101F2000F4AE7273D14E4E08DB63596723CEC99D60
-:101F3000CF1EABC86144E76B73FC6539A9E87F3CF1
-:101F40005748EF7BB3C0529C877CE7EE9DA8778D06
-:101F5000657AB5ED288B7CFF78775C5DD68073F869
-:101F6000EF57DB4E307C57B9AD5F11AF50607DF35A
-:101F700023FA5F09FE82D69DB1BA6AE01BB091FEDA
-:101F800058EDA4FC43D5E9947FA4DA43E9EAEADEFC
-:101F900094AEA9F652F9DAEAA1947FA25AA77CB0CE
-:101FA000BA88D2F5D53EFABEA17A32E59F04BF18B1
-:101FB000D34DE02763FA34F8BB58BE19FC5FCC3F21
-:101FC0005B1DA0B4BE7A197DDF525D47F9ADD5AB7C
-:101FD00029FFB7EA20A50DD59B28FD7B753D9537D8
-:101FE000563750FEE5EA10E543D5BB28FF6A753346
-:101FF000E57754EFA5FCCEEA164A77551FA5F48D78
-:10200000EA562A7FABFA0CE56B4DFCF740D6E41894
-:10201000F721645EBEC720EDBFF168BF23710C35A8
-:102020007F65B0DFA3ECE8687C1C1771DDF0FB096D
-:102030003DD7D744F84F4F8AF1E47B0CD1EF2830DD
-:10204000619FCA774FE57B0D33C4BCCA053F0C4284
-:10205000FAEC4DF4F9D6C5F80BD21F1C90EAFF1B21
-:10206000D167B62940FEB09DDF27BE21D5FF52CEF5
-:1020700020DC2F9CBE93C6737A69DFB0D81A4ABDA4
-:10208000318FDEFBA6B85C47E3558A73DF1D96BF30
-:102090007C2C0BEDE9A29F547A67EB1DB3837EDFA6
-:1020A000F02D0197B7724C86F4E354FF9B38CF6F45
-:1020B0001D55B79A60FEDF5E79FB93BFCE0DFBC95D
-:1020C000D7A2AB09FECD04E631D3B942A6BF968BA9
-:1020D0007613185698BF910528BDD5EDDF83FDDC3A
-:1020E000040637E6FDC3AC39B1D6153DAFCF72B8A3
-:1020F0003FFC598EC9905AD3FCFB104EDF3A749ABC
-:10210000D73B978FE989EB92F32A12EF8E8C67AD5C
-:102110004FE0FCBEDDF6F561A55B18FED21FA77B84
-:10212000FD28C76E57C4BB76EDDE11A0F2923B15B9
-:10213000B2CFA6803F83FB43F2DD805355667A0F12
-:102140001EDF19C0FDB353559FDB919CA11EC3FD3B
-:102150008D1A3CA003E53577F3FBF425F82EC60075
-:102160007CB7C0C6FB5DA810DD0D4FCBE5F79FC166
-:10217000DE23FFC9DD4AF7F4804EBE273AB95CA5DD
-:102180007BE7EF98823D15DA4F9E6E51607EE56EDB
-:10219000AFE17703A2E9609EB82F20BF037D99BB12
-:1021A000C0385FBD34A437C5DF5FBEDC83F0AA3121
-:1021B000F1FB43813754F17B4E5C44ABC32FA53810
-:1021C00023D3BC5E8C17158BFB264D2A5B10EBBD11
-:1021D000F05E5D38BEDE49E7EFE7D544EDB374E964
-:1021E000C2E9AA4B174E6FC5AFEEA67784E6EDE2C3
-:1021F000EF1DB2BC96BEB1DEE7AF5CF0469FEE11BC
-:10220000EBA86CD8CFCF57B096BE91E7C975D1AFC8
-:10221000A423D5E2F0AFB347CE8FD30FD0754F8450
-:10222000C3B7C940D7DD88AE0FE3BEE278AB27E97C
-:1022300046057F25807D85EFFBF8FFECA4F341F296
-:102240009CD034E6A3B41CC800E9D8175845EFB9B0
-:10225000CE66F5F47DDED0A9F47BA495AC75543A36
-:10226000C0ED86658B5EC3E7F0AEAB5B351AE3ABC2
-:102270001383A5AF613A61837218FD54E08B215D31
-:10228000301EA2542DC12399376FCE5F825B66E367
-:10229000558E0FF626C707D08DAEBADAAF13F8E029
-:1022A0002A6CFF6DB24EEB50138B0C7C50B298E948
-:1022B0008A3B7CDEBD8D2F86CEF90CB7D498D64AEA
-:1022C000FBE6952F5B5D88E7D98CEBED703C43EA2C
-:1022D0006B46743E87C57BB1DE7141D7C7B319D158
-:1022E000F57185D13D756947B21C7FFA806E61BD7D
-:1022F0007BDC141C9CD88DF4F2249CEFCEF4EB3CD8
-:1023000018079BE3B6D1FBA7C793833951EF7CD065
-:102310007B44328EB5D2CCE34AD1F35286EEE4BF91
-:102320006B616101DC9FC0DF751E8CFC8CEFE628C1
-:10233000F40E740BF2BD79A4CF13ABFF5AD1EFAEFC
-:102340001FB9BF1B80F5E0FDC676E338C538F17CC8
-:102350001CA93FDA7E473A8D19C6FB4D975CC2CF68
-:102360003B0E9DE6BFC8944CF226C3E6BF0BE94E78
-:10237000C675A41FB82BF74877F2D77FA8C942FBD0
-:102380009CDE2140FBFB4A2E97DE317BE8DDDD77CA
-:10239000F273297E2FE5EDB54379FCEB5A19EF1A5C
-:1023A0001115EF8A8AB7B011B1E35F8C79CD386E21
-:1023B0001FF689840FC5595E1DA1197E3FEA55E1BC
-:1023C0007F9E2A72E7219DEFEFA2D23A1353F8BB0A
-:1023D00021AD0E95E86C7BC06BC7DFA3582EE2A43D
-:1023E0002BA2DEBD5E9E37DF89E702AC0EFE9EE5C6
-:1023F0000323E367469E477FAD073FB77463CFFC77
-:1024000077915EFADA8323493DEB9A07E7AF88F5C7
-:102410005CE204789BD0EEF48978A7FC5D9351A42C
-:102420009F259E2F543F3FAD0517C7E37ADD8CF8FB
-:10243000CEB1DA46F253ADD74378343AB5E7C4CDDE
-:10244000843FCDD71BC7691A1CCFEC50FFDB260B8E
-:10245000C5A15E3695FD19CFADB77E6C6578CEA16E
-:10246000DED1594323B7FEC75F8DA2D431BC90BFE4
-:102470003FC912F09DCCFE4EF697FF462489FB61C2
-:10248000F50ADBC51F6BD513F09DB77A133B7D159D
-:10249000CC6B8B7DC0839711A9F9545CE77BDDFD84
-:1024A000AFE03C06B32ACA3F60F1CD5C07E33EE0F3
-:1024B000B2117DCCEAEE7B95CF932D1907F3BBB219
-:1024C00040A1DFAD5B227E97CDE18D37BCB7EB3B02
-:1024D000D393F4C5DB423ED7A6EBCD78B1A343B886
-:1024E00039B556C33B592C8BE273128E91F8720E9C
-:1024F00036E0CB6F8EC4D750C0D7A591F8D2958B5C
-:10250000C1D7935D18CD57D26560A467D5A83CAEFE
-:10251000C76AA896338FCEB7B6A34FCFE67AC86FF7
-:10252000D72E217849FA94F41A834E6FDF8EF23851
-:10253000DBE4C4FDDD7BC7C5937E93742BE9D5D264
-:10254000959FAF02BAF57585748ADD371A654834F0
-:10255000DD62DC2B923E4B3AA463E68CE4D7F1605B
-:102560003F24B9D0DE39BAA13E823E4BAABED6B8CE
-:10257000FC387B55FCE0709CEE7F012DB720EB0012
-:10258000800000001F8B080000000000000BED7DA4
-:102590000D7854D5B5E83E33672633934972924C93
-:1025A00092811038934C424826302480FC552721D4
-:1025B000D0F0EBF05783243A58B4412193026DA335
-:1025C000D77B33908001EC2DA2F5A1F2EC808A68D4
-:1025D000B506A51ADB889320DC685107B52DB6DA5D
-:1025E00006DBCF9FB64A10AF175B5AEE5A6BEF93DC
-:1025F000CC994C10ED7D7DDFD7F7A27C3BFBEC7DC9
-:10260000F6CFDAEB7FAD7DB268A6C4DEB130FAB9A1
-:1026100000FFFCF0EF9D62F81D7F5CF85456DED59C
-:10262000DA8DE2F915434BE8C7DE2D1EEC675AB68A
-:10263000A9981918DBDAE264CCCC58BBE4F5E5C004
-:102640007872D3A90DF87C8B0C1D1D8C853CE6F0AF
-:1026500043388FEC2FF6A70C8E975554E550B318DE
-:102660004BB9EC4FC93740BF4FB30D2A93E03DF54E
-:10267000BA276C93E0BD93C90CDF4BCD8C363C0080
-:10268000EDFD6F8E65FB60984FD704C62876C6B601
-:10269000B5C03EDCB89A708E612A967D39062796C1
-:1026A000AA939701277FCE447B98EA7B5CF98C4DF7
-:1026B000C6BA4FF4EFA3FEDBCC3B2D369CC7655169
-:1026C000F64983EBBCC2C89A3A60BED92A6C0AD6D6
-:1026D000CBCEB7AA8B53B02E51FDCE96DDFEDFBB1D
-:1026E000713D612A33178459A08C315B71480D41CB
-:1026F0003FCB6616C0F7E3E179BF4BA675587AEE7B
-:10270000612AF4CB747BA500F4732C80F13438C3B8
-:10271000BF45008AB472E8B78FF9D824848F2D1C86
-:1027200092868EB728ABAA574E1DFEFC16C5E10156
-:102730001378A09DA7E56FC64087076B4E03CB6655
-:102740006C23F65519ABCE875F70DE66F3DE2498F6
-:10275000F75A359DF6FD89A32A8D79869FEF7E383D
-:102760009F501140BDC542E5BE168585004F1E0431
-:102770007CC1FAFE1695CA032DC5543EDAE2A5F6D1
-:10278000C75AA652FD472D3EAA77B4D450FDC916AC
-:102790003FD50FB5D452FDE99600959D2D0D54FE01
-:1027A000A4A589DABB5A9AA97E45129C1BEEA738CC
-:1027B000E45C02E7D17EB3D9A7027CEEC67304B80D
-:1027C0001FF1E5677AE1BCADC5069604DDACC777BD
-:1027D00031DC8FD569F085E11CB63A77B1AF43693A
-:1027E0009A92D22EA5C1FE1FB7B74B13A05DBE9320
-:1027F000A9F0FC7E29D4C0BC8CFD6B78865F9EC698
-:1028000098DBF9CDAA0CA8B7862B775A006F8BD42A
-:10281000C5B59B62EA6A4AF98D0795C1FA18CF5E81
-:10282000D906EDED6AF54E87C4D7C14632B62B3CCA
-:10283000C7BF09F02892CF4208F77E97398CF8B8C5
-:102840001ACF4BC6F52BB4FEF9ACD56980F58F5184
-:10285000CDE54837D03FC21C97DEFF6E55A5E7F1A6
-:10286000EF5DAC9F61D225F563C68B8C87EDD245B9
-:10287000C6B1484B2D5158FB0E93E01F5976E21F0D
-:10288000ED2676AD1FE0DE6EE5E5699744F3F5BA17
-:10289000AAAE724179958B9F6BBB35A454E1FC6560
-:1028A000062FF20BD6EC7A3D1FE6FBF64B32DBAE81
-:1028B0000EE2E7E3829E0BC7A4F8701EF62F967017
-:1028C00021CCF3D5318FB76540BDF001AFD708FDFE
-:1028D0007730AF0DF12474BB813D04F51F4E2AC83B
-:1028E000580CDD4B27FF382300F8922CD61166AC2C
-:1028F00006F16DD3961BC6F441F9E909CEA7BAC417
-:102900003C7B4DD1263ACFC97686FB666C6732F2A6
-:102910009D4D4E38A4CB18338CE0A5D9A45C8DFD19
-:10292000CC5BCC2C04EB31FFF5328B1FC66B3D9793
-:1029300054837C84B16832F231B335A0A4C3F39DD3
-:102940002103F18556D51E9660DC1DF6F25E15F961
-:10295000A762F016221C3D0682639BFD6B6123F289
-:10296000676953032B80F52A4F5A5CF03CEC312801
-:1029700048E761DF921AAC8702B2B750150C02DB50
-:102980000319E1ED382EEBFFD9046CAF635E84C30D
-:1029900096EC3FF72443BD75B9E235F2DEAA3C85DB
-:1029A000B111F81B4CD96AEADB9C8CEB58C1FBC314
-:1029B0006FDEC54087A949FCFCBED73D57C92F2310
-:1029C000B912EAE37C49BA0084289BBC162FB48F65
-:1029D000B797D7F8A09453CA2D2AECB34D29B7ACBA
-:1029E000A2FD333B83793219E74FAD8AA1262CDA59
-:1029F000BFEE2131F5827B0A9112B5B7D9777523E5
-:102A00003CE4EB1973A9B83E984FE37B000F4BC130
-:102A1000CC5E15F6D17E4306ED4396BC5467D7CB0A
-:102A2000B4EE91AA2DC2C6039F372FEC65C03F4676
-:102A30005A6E5A80F5110DF2EFFB62F8744E405F4A
-:102A4000CFAAD5D73319D42D31F30ABC89875B3C83
-:102A50003C46286D2770FD2302323D8C5FFF3DCA46
-:102A60005DE9950CD769A77566DBAFAB040801CAB1
-:102A7000F93721FEFDBDEB1CAF2CB1B860FEF10EA5
-:102A80000382934D60FD9B71DC1D02DFDB5DFC3C2E
-:102A900007E9CAA8D1A50FE9724CB3818562E48E1B
-:102AA0002B6463A198F90ADA3374F5C29D2375FD8E
-:102AB000C7EECED7B58F0B97E8DA4B0F94EBEA65EC
-:102AC0001DD375FD277456E9EA1323F374FD2B7AA1
-:102AD00097E8EA93A357EBFA5F76F23A5DFBB4BE50
-:102AE0001B75ED33DE5FAFAB7FA5FF165D7F20E387
-:102AF000868E047272BA8BF38536A72FEA4B20CFED
-:102B000007F42E45EE1F380FE09D494EC0EC98F9B2
-:102B100052BC3640A6C13A63A3947793459DE47AAC
-:102B2000ABBA19F139D54CF82CA33C87FAFA9BCDF6
-:102B3000E124C4C3CBBD2AF217AF8BEB336F17F977
-:102B4000BE8AE756996A21B920DB793FD93E87F4DE
-:102B500094D1BB812F55A0D6C806DA93913FB78494
-:102B6000FC6EF7E0BAADCA4E86F45B995AC3FAEC34
-:102B700083EFCB8A8F0552703E95E6B32821EA6732
-:102B800055E1FD987D1D3618981DF97837C809184C
-:102B9000BF23255746FAEBF86B4935952933E620D4
-:102BA000BE4F54D8034F40FF0E89F532D0933A0CF4
-:102BB000EC2CE86CEC497BF99D20AE8135FA8DC890
-:102BC000EFA6B0262A471B980DCBBD52DF0606FDA7
-:102BD0003C4D27AA72A0DF0977600DEEFBBBA04336
-:102BE000E0BEBE3B9EEB595BB2E7A9A897B5BB3AE6
-:102BF0007AF3713D592057901064BF17F50A6DBFE5
-:102C0000778AF394F3DBFB50FEAD4FB7A8A82FC92A
-:102C1000969DFEDF03BCEE37F53DD20AF5364959E5
-:102C2000DB817CF166BBF72186FA23879B9A62A839
-:102C3000D80CE3766CF2C9E9D0DEB18D79DB903E39
-:102C40001C959BD3E179E1A855860CA407F7A6CD86
-:102C5000586E413D16E61BE7D96BC884F6D24995FC
-:102C6000B50C65AF02F3650E8F4FC6D4DD0CF7C30C
-:102C7000DCF2BB8857A8755F80A55766C079C3BCD6
-:102C8000563C6F894A8283F59C3D6CC5BA9BC3C58F
-:102C9000EA93C2C95077B87D92CF83EFEDA6F3B522
-:102CA00046F47AEC1A77E04E84A76381FE5C65CB2C
-:102CB0005DB4BE1D064E17EDE9EA7194CFED2E7797
-:102CC00046AB3AB84E8DAFDC2FE4A7F65CE32B0A97
-:102CD000DA145983FA0DE0F96E4301EA673B19F201
-:102CE00027EBAD3B19E2B55509A90CF5F07F0B11A7
-:102CF0009E6BFAED064133D5F9B51694D7671DE5FD
-:102D0000A4CF5A9BF7D379C5C3CDDA6760BE8BC019
-:102D100035B5E85E92EFC080D542804F4FB6BD61B9
-:102D20006F02BD7FAAB01BB6011947495EF92DC8D5
-:102D3000AF4DC2CE004C30A07C3BAB30925FACC3F9
-:102D400045F50DE9BCAE8DB321AB3CE762FAB77532
-:102D5000B7850562F6B10DE641B86C39BFB806E13A
-:102D6000CA64220EB6E3AF9EBDDB1196C2AE992AAD
-:102D7000E03D1BE706B88E3633B20BBC8E053548F6
-:102D800077FE73F9247CFFE4CAA07EDE103336D1CF
-:102D9000BA4D9A5C325C98406B55CD9A1C26D596FC
-:102DA000CB2DF8BFFB82847C3F468EF182E4BA26AD
-:102DB000B70B77EADBC7EED6D7C78587BCFF06CA55
-:102DC000FDE5FC77900BFAF67B85FC5E8EF21B4AE4
-:102DD000B6CC4472CF022BBAC0E5EEA01C04BE9064
-:102DE000D711A944363A6A638C3C64B40F9D7C5C6D
-:102DF000E3E67CCCDF2B9BF01CFDE7C0F8A818CAEB
-:102E00009747277178F79853C29BE1BDDBC12E0A23
-:102E10001471FB3900A4F65DD9FBCB3AB4B37A8DBB
-:102E20005EC0D881738A3FD715F91C7F7A5DFEBFDB
-:102E3000BA487FE8AB40BB1AE70BC4CCD7634B1D45
-:102E4000CFC06E79B92860CC877E1FD73826217F06
-:102E5000481AC54C489F383F2B1AB4DFAF12F4B460
-:102E6000C3FB5AD31158C76D2793501D67B38DC745
-:102E70007B5BA0BE3E4F267EA65CB6F60768275752
-:102E8000FD1ADAE19DDB543587F4F45E13D9EB5576
-:102E9000028FAB84FD75B4D044E3E68A75E78812EF
-:102EA000DEB071FB3B62437DB6F400F062FD792633
-:102EB000F3761FE9BB651DF1ED3E86745C22F005DB
-:102EC000EAF64AA84F14F50E26652A708E136AFB9F
-:102ED0007AD094F0BC78D4867878D0CAF5B7470514
-:102EE0003E6433C91B81F5671FB07BC3D02FC5C8B3
-:102EF0000E46611FDE17E47762CF7D7C97BEEE61E0
-:102F0000317517AE435FBF5D6D92102EB7D7818EBE
-:102F10000E5BAEC84F71BC5BCA10E645885FB38DCF
-:102F2000F689684FADAFB433846BD2A9B1FF2B8A59
-:102F3000FCE38491A15C5092D53BAAE17DE56799C1
-:102F4000DE4DEAE0F93FDA82AC1BF8DE052F6B03B9
-:102F50009EFCDD2A5B03EABF8FC179A21CF911D860
-:102F6000D9D8DE01E78AF527C1CEC6F210D8D9F844
-:102F7000FC69B0B3B1DE097636963F013B1B9F7703
-:102F8000819D8DF5AB8A2ABF8AF8526FF7CF9610D4
-:102F9000AE3E595580AEA44138931F48627DD2059C
-:102FA00020903A85F525015CCF8DE17490841E2632
-:102FB000E0C32CE0B5205E7EFE383E6D9C8029D1BA
-:102FC0003853611CB2132C0AFA45F2E18D3478FEB5
-:102FD000E1CDBFDA8FF262A11458910FFDD74D7E7B
-:102FE000C7CCF5E77E33F6DF6305FC073E344AD0F5
-:102FF00041A80AE08972F725A3B7157A5D3EEBD4A4
-:10300000862CB0BF6FDA377931DAEF97DF74AA62B6
-:1030100034D40FEE0B2F964119BFFCE1534FE5025C
-:103020000FCE796015AFDF79EAEC28684F0BED58C9
-:103030005C3D0DFD525C3EED91586DAC7ED72CF0A1
-:103040003BD8BC8BE41CF077867068CDF6937C3C53
-:10305000EDE84F5D05FD8359FDD9D75D847F079B62
-:10306000EF2639D49AFA07D23F5A07E48597E485C8
-:1030700036AF262F3E16B8A7C98BF5565E1DE8174A
-:1030800028A0E7770ABF0E0B17523DD3CAEBFF5EAD
-:10309000A5BE8A760FC087ECDC23A925DF9B897645
-:1030A000658DEC4D82FA9DF6722BCA9B07F3B9DD54
-:1030B00002E386D08E0FCDB6841FC24375A8448F1D
-:1030C00019DAF80E372A5D2C43ACE385E9B608DA45
-:1030D000F9ADD5967DA84FEEB2E7D378AD53CD21AB
-:1030E000F4AF68F5CDD3A75B509F484FCD70615DBD
-:1030F000E34FDB01EFB1841F238E5B25B65B65B127
-:10310000478CC8CF2DA63FC5EAC9761625FCF11A13
-:10311000C020413E50C0F1AA82796BF1B9596A0AC8
-:103120002132EEC1B5E33E52849F92E5F2756BFB0E
-:10313000F0E5F27D69FB483187C43E484FDA6537D8
-:103140004450DFDB05FBC2F176E7AB049FF87D312D
-:1031500074BDC2B8B3A68A752B330FE13A661B7CE7
-:103160006DF8DED1CFEA1C805E6C0E6B92F17901B6
-:1031700058B4E89705946EBB7011BD23DE2F7BF920
-:10318000EF24DA0FBBC94CE7F24C215FCFBDE6B0AC
-:103190008B91811B1EB1246578FC7D6308FEFA18B3
-:1031A000D2536B868FE3AFD29FBA09F137BD3F7B15
-:1031B00033ED2B92F03CE2F138FE7C7E0BFF841C59
-:1031C00030227C3FEF3CB573D4F0205E7E4D28501A
-:1031D000B4F375D23E7DC59C0E343D8A819D9332F9
-:1031E000147E5B613CB568B06E76FA493F3639BCF7
-:1031F000C5E8BF6DFD9BB12191FF36AD80D3C1A65F
-:10320000541BE9CDADA95C6FEE4E9DA7B377AAC163
-:10321000FE91003F8C99AC03E9C8987635F9BF8CD4
-:1032200039A821E1BAE2F4D1B4055C1F55401F4D25
-:1032300030AF56CAA88F26D05307F4D18C795C1FC3
-:103240004D35933EBA27C55CBB3701BF792F9FEB45
-:103250007BDDB88F04F61ED879E487D4EC3CB3123A
-:10326000207B4DDBE77BF99CAEB4FE494A1343BF9C
-:1032700098D1EC5551DF34DAB8FE9804DB2C8E91EE
-:10328000DFDAFCEFE49B088E3D45FCFC0C16AE9F9C
-:103290005CFEAAD49408EE6A81A63F24C6BBBF0395
-:1032A0006F882F94DBCD3ED40FCAEDCE2AD40F8683
-:1032B0007B0F4CCDD0FB19837CC5FBB72946923FD1
-:1032C000B2D78978D661EA7BEA55B4E38EDA49DE73
-:1032D00074A48CAA8AD59FC15E0D15C32007FF0276
-:1032E0009468186AA782FD34BD00C6ED599F3D89D8
-:1032F0008F0B7A5ED950BD32DE1F3040EFA9FB5DE7
-:10330000FCBDF0087C4F5A3F3507F12A9EDEB532EE
-:10331000CFF952DE6A5857DE885E2AB5E7FF9B195F
-:10332000C9BF16DF7FF1C03970B93C0E264B33920E
-:103330003C5E8CEBFE70E36BD95E584AA37C86E45E
-:10334000F2C74D53D36E5339BF3D8072E69B32F1C5
-:10335000DB516BBAD33362CEF9DE96CE3CD98D7198
-:1033600083685EB59BEC015FA2F5FEABA03F16192A
-:1033700043FCD924F0407544E78E05B8AB7683173B
-:103380005DD2207C757CA0524EAF5660FEBC16E626
-:10339000B543DDC514F267E55D3012BEE51D594148
-:1033A000783CC6D12F853C31F3202B8E898B7CD283
-:1033B000544DF499973360C751FCE013476431D200
-:1033C000F72777F115E53DA06F07194BFEE61B3691
-:1033D000DAC2680A8EB95531603DEF07121BE5C2AB
-:1033E000751C71DD86FE9A6792C95F63DCED267FEE
-:1033F000CB0FA4C0F505B08E0FC3EAB7D1CEA51F81
-:10340000E8B7EE3BB67DDB498E45E7921CFB968123
-:103410003D94C09FD456C0FDE35B04BEE7395FC94D
-:103420005B5D81E5713AEF4BA5A783C8B7619CDB73
-:10343000D27652BC2B54C58AD1FE6B37015E25A0D3
-:10344000D73305226EA6F163013F2B5A2BB00FA391
-:1034500024F4BC038F3EFA6836CA6D864ADE00DD6E
-:1034600069E32417775063B2D7C7D0EF20293ECE47
-:103470006795903384F19DBF1A13E27544E3D3AE90
-:10348000AD4EEC5FEDF63A910EBA5D539CD701FC60
-:10349000EC76334B8AE1C31A9EBC903285F4106DF2
-:1034A0009CF529F917B5B7CDC08FD58BC86933FA0C
-:1034B000BD519FE999665161BD5BEDE551D4B7B649
-:1034C000DA1DE5E43FB703DF88F127D9EDC7080F20
-:1034D000ED5EEE67B323FF457F92D87FB7EB18ED23
-:1034E0005FEBB7A780D3BDDD1BE1F147B066B09FAE
-:1034F00055F687D0CEB03A18D995560BA7A76438A1
-:103500000E4B0C1FD1E6FD7E01B7D7B68E2A8F5623
-:10351000D2FA64F408B0ADCE7227C9438433EAA36B
-:103520002306F451F29BBC2EF881364E6B37DFA791
-:10353000BFD9E9ABCE443BD4FF22F285ADF6EB2CEC
-:1035400021940B29932E3ADEDBE2DC868ED73C4BAE
-:103550008CF73AD28331A55CC1F14CC82712E0DF69
-:103560001FC4BABEAC5F0C20AA90DDC6B87E051899
-:10357000EF4CA44768A545F8B786BEC7F9A44BD859
-:103580002FC0273FC5F5AF1BF5CEB14AEAC5ED9672
-:103590008CB972B10CE7F5319CA0511AB4E3E3F594
-:1035A000994A633FC9354D1E69F2E95ED467CC8301
-:1035B000F4A4F95F721BFC24B725879FF006F41B67
-:1035C00015E9C68871DF04709BEEE6709352A7AAD6
-:1035D000482FD5E7FB72F1BDC329EFE7B2183F9A38
-:1035E000C60F5FF86CBF15DB3F69A8BAA8DEA2C59D
-:1035F00085878B07A7DEF2876FC6EA2DC3C5873F95
-:103600002F2EDC936A26FFDBFD929E2F4D72733EB8
-:1036100038C1ADC50F0363DD59D8CFEF25BD51F8D3
-:1036200053DE2E0A94B8D1FFD56E662138CFC39FE2
-:103630004D71227E5C2A7C35FFF948A14F8DB4EF95
-:1036400097904E47368425F47FE7367448BE8BF456
-:10365000330ABF92D6DF24C6BF42EE37A2BCBA42BD
-:10366000D071EE399915C7E8817F2BE0FA9449E8CB
-:10367000EFA93D8F5871BC1E83BFBD08E543AA4129
-:103680007D2886DE4D6BCA2D5531F069C5B84E8256
-:10369000F3AB730FE85D641F69F2D6A4C90987AC68
-:1036A0009313C1648EB79ABE139CCEED21490A2CA8
-:1036B00047B89E9EFE8745C8B24E4B1D668C7F7FE5
-:1036C0005E5C6340AF31845769760CD28B57567E6F
-:1036D000DA07EF4F7CB892E861320B507919E37A40
-:1036E0001FE8515FC7F92A70C931E7CBD0F590FDCB
-:1036F000F9FBB812FDDE59E89F8B92FFF4BBE7257A
-:10370000E2E3F1F0D93F009F81F89DCE0F9A2BE4C0
-:103710005AAE6857D10FEAC27894DE4F59D1ABAF99
-:103720004F8EEAEB979D8CF37B867C3F7767F3782F
-:103730003F0EBA07E80AF9C16A11A71C150A572AF1
-:10374000B0DE3CD641F1C0DC860C1D5C2F378A3CD4
-:1037500009E69398B64EF8C995177E80EFDFE7D655
-:10376000F49F10E9593788F66F54AFFE761BDACE16
-:103770003B4DE40FB5C0E408AF6FCC5D321BCF7595
-:10378000883FB549EF47CD8D6D0738DCB0C7A46BD6
-:10379000F7FB26921DB054F86907F68BEBC8E2FBE5
-:1037A000CD2D1F3AFFE7CF0BFF3286CEAF8D7B2F9B
-:1037B000F01BE4A3EC3C9CEB14841B438F03CB93E2
-:1037C0002312C6A54736311FEAC3B91B992F917F33
-:1037D000FF6501AF7838B3D01504BF59E2D948BBB3
-:1037E00091ECF4911B0DA4078E047E807C60D15A6D
-:1037F0002017A8E7AE55498FBCB2C1C0500EB0F338
-:103800002DBAF761B9E4EFD4CEFD5E1C0FF5C87593
-:103810002C6CC0FD3495103DD1BAF207F101E0F5F2
-:103820000E879785E3F75493CEAF99877ECC18B86F
-:103830006878901BF7BCD1CDE32E1A5D803C7BD914
-:103840004D78C2E55C21CA3958D287D34EEEEF805D
-:10385000F55DBE99D17EFBD36D619EFF30102F3098
-:103860005E180BFCC932AB18FD2A3B149B01F31404
-:103870000EA7F7DDC7D219FB2DA8BFD533197BDE04
-:10388000D65F2A41FD8F0FFECBAE763894C3D6FEAD
-:103890001FA2B3D77EFBE6253531F5D47FBF9BEA67
-:1038A0006C2A5365808F0D67807DDA9479078C30A0
-:1038B000BFCD632727A48D0DD029EDA76DBA7A3B24
-:1038C000E679B4151A484F62B1EDB08FDA4245D0AF
-:1038D000B78FF2D8580D8FDBC78E2F3B2E32FE3CB0
-:1038E000187FD21718DFC2D79F8D8F40BE64E3FACE
-:1038F000D14F8DE3E3F9A2B328767E319ECC427B93
-:1039000031BE02F3D9253E9F827924D94C9F3730AE
-:10391000309F02F395FD03F6533BF43C4C173B8F6D
-:10392000ABBFD879B4197CB4DED0783BD93F0C9AC0
-:103930000D53D0CEE0F35965F6825CCEE1DA366500
-:1039400010AEA0EFD1B8D07DD305016713C25931B5
-:10395000139C87835B8FC2F398B629B6F026D7FFF6
-:1039600085F372F2F38A9D0FF5C64B9EEF6A98CFEE
-:1039700071E9F3217C917E06E00B67B239FBD2E15D
-:103980000BAB0A5D0A7C7B605C430C5C07F385EE45
-:103990005150FFB79AFC162FF0DFEB0B791EA2C730
-:1039A000B1C442F903594B2C9897B7C563AFC1FC1A
-:1039B000BD2DEE6516538C9CDEE2A9A376E84F7907
-:1039C0004E9E880DDD13AC8C45C9FEDF36B3DAB9E7
-:1039D0000AF1A789E74D6979449A3C64223E49FB84
-:1039E0008217D3BE72A8BF07FA6F6B9A44796269D7
-:1039F000E97FA6FCA81D0D5E2FB6DF67E571C6BB8B
-:103A0000459C091195FC68E3A73F80F1D6F2C2F509
-:103A100012C517D75E3CBE587E265A8579566C155E
-:103A2000CFA372D6C971F2504FB73B10AE3CDF291D
-:103A30002C71F8EAC6BBAF308BC79FDDFB18DA7775
-:103A40004FC158463D7D1930EF289E1E65B34FA9E2
-:103A500044BD7CBD81D6918BA17C1071E5650B9C2A
-:103A6000ABE0F9A8EB65AF04CF733CB752FE116829
-:103A7000F5A46F783CC7ABB03E649FABF5FB88DF25
-:103A800057FCBA417091BCD1CEABFC8C3719EDA874
-:103A9000F2C225941F463F1ABD1BE3F69389F6AF89
-:103AA000C16705396673C7EC8BE9FA093BED7FB650
-:103AB000BE0D9109E5627CFCEBDFFCB4CE24E6B5DB
-:103AC00098E9BD3AB217B5B8DA48A41D3CF7D18CD5
-:103AD000C725E2DF9FC2DF674E1E674BB281E9094F
-:103AE000F427DD6823FF655212D4E17C2433B38CC4
-:103AF00080E7F70ABFDF2689C9581F9C2FC270BE16
-:103B000056C9BFD3EBC292DB4BA6743FE517629850
-:103B100036D6EEECC1BC0D685FBFC695837EBB3464
-:103B2000208828DACD222EA5F949520BFA56A2FC9C
-:103B30007EFDA1BF2CB1A07C46C7D274D0BE0B3F86
-:103B4000DD159A39489749E7463235C67E49929B3A
-:103B5000287F23E9DC689D3F2522EC2EADEE73C85B
-:103B6000D538DF7FA15D00F85CC994367CAF128048
-:103B7000A2C6FA47CF3975E30C8E3F4A376F04EC83
-:103B8000E7D838C0F0E32733B53876FCFC61C62FA0
-:103B90008A1B5F4938FEE0B899BA71B7C89C5F8448
-:103BA0001CB670227F5E5651D57924E5E1F2CB1C1C
-:103BB00045DCCE057E2C53DC49E0CD6DCE26CA37E0
-:103BC00033DA787CD424E22547521A785EC4287D03
-:103BD000BE591553646CDF923AA75782F62ABB5E32
-:103BE0004FBFE2FC3B46E43B57C87A3DDDC79A082D
-:103BF0003F2F67FAE7A6517A3E7010E903FDFE29D0
-:103C000093A294979665A73C83E1FC076FB530CAF1
-:103C1000973225FB9B50C695ED4FCBDCE2847A1A98
-:103C2000C7AF19FBDD4BD11FF496C0E32D40F70859
-:103C3000C7BAF5397B8D31E3D69923852847EA0C3D
-:103C40003C3F9F7E60FEB7B246923F357E5ECAF033
-:103C50008DF147D537497E77CC3EDE12743130DFA7
-:103C600086DCBDA8C70ECC9714994CF30DE4F988F7
-:103C7000F9B2BFDC7C6F0B7AD6E6ABFFB67E7FF580
-:103C8000E628EDAFDEC0445E3F9FEF6DDC9FEB4B5F
-:103C9000CC27F2B506E6FB8E7E7FF54951DA5FFD53
-:103CA000803D29E6CBFE72F325999B281E7387C4BD
-:103CB000CF754351D99DE88F3FBB60BD8AF8A6D927
-:103CC000678BF005C0B345229FE9CA5166D21BB489
-:103CD000710FB44C653E33F7DB60593C53A2FCFED8
-:103CE0007153251FC6C3F600DDFB8AD02FA5507B7C
-:103CF000B8C549E5BE1695CA07C11EF4917FCACB67
-:103D0000EB45DCCEBF6384B26235EA0B95369EDFAD
-:103D10003C730668A283F61618603D56CC23FC1A45
-:103D20009BB81D6A45BB393C1CD5D9613C27DBC417
-:103D300017A22D504F9A6654316F3BC9C5FC89FCC0
-:103D40002E3F28E2FED8DBB47CF8AF483CDE0EFA0A
-:103D50004825ECFF5A016A665C20A15E75E577D2C2
-:103D6000491FA95BD697A2C03AAE9126FEDC0DF0A2
-:103D7000F8ADD047AE1DCDE938DE9E74A0649984BD
-:103D8000F97AC670187E5D9AB294ECD1A5CB19CBA6
-:103D900080F7AFC4F740AEBC2AF49957FA9218DA0C
-:103DA0006BA16A1E67BEE656BD1D798735A2A01EAF
-:103DB00077C74407C3F3A8DBA86FBF4DC40B96C6F3
-:103DC000D99557C6E5D180964978823C814D83F3D9
-:103DD0002A4A71507EABC8A3B9BA48E57C6E948379
-:103DE00092A833E6BAD330FE98644E7CEF461BEFC0
-:103DF000A8E03BCCE12338687967CCF8D8447A5FF7
-:103E0000CCA7BD77AFF4D8888BF935416F7BB7AFBE
-:103E100098CB67D4AF0FC6ADF3EC82FCEF55B3443B
-:103E200078DB2FA35F415BFFFF297CBD097D1AB0C2
-:103E3000EF57677D3289E22D6C14ED7B91863F222E
-:103E40009F6AE9405D66724C3E1D73F67BF0BCDFF5
-:103E5000F84AB2773BE19FD01F226F1A2E247FF1E0
-:103E6000F106D6E1F4E5717F5CB542F94062BCE150
-:103E7000E01C9FEFA0F96DE82726DFB0752FCF7704
-:103E80001CE9A8FA00EF45E1F3777478A5BFFFD4E9
-:103E9000DAFD8884F6C57D789F4B1E9C0FFDB4210A
-:103EA000D25FF5F7B2E2D7A5DDB7D1D6D36A66C542
-:103EB000648F1A803FC07C0BED7DB2A4A2DFBD5F92
-:103EC00046FC2A19CBFD449813CCEFB9703DCF982E
-:103ED0006BE0F91B6354AEF7B9FB47C7C685D2C682
-:103EE000F278DAC2E4D736AA20FF4C0F6F5E8AF967
-:103EF0004B0BD35EDBE882BAE5E1565ECF7DED1376
-:103F000017E86CB687DB78BDF4B54FF2A16E7F7809
-:103F1000CB52CC675A38831150521FDE4AF2326DB1
-:103F2000AC664F4747E17C0B254E1F5FB634261920
-:103F300012C6EF9D63353F2933E13CFEAEFF388961
-:103F4000FCC8AFF95F7DFA7823C3A66CBC27247E3A
-:103F50001CA9A4CFCCC3DF019EF3E54837BE6FB0E8
-:103F60004408AE63316FA69850E0AE0B17C98F8836
-:103F7000C72309D0B519F565556175A01FB736B3CC
-:103F800080B52006CF994FE039CFE3D1D6A3CD3FFE
-:103F9000645D70A47246ECBAF6D038DABA4E4F4C73
-:103FA0000AE17D322D7EAAADEBB4D47F3F3A23BE29
-:103FB000F9C3CEE5786EA753FA474B503FF1F0FBBB
-:103FC000748EA7B3FAEF97BC3175133FC7CB1FFEB2
-:103FD000C152948F1B25DFE563317FCE6CA77B6BCD
-:103FE000ED42CFDB91150831AEDF53BE63288FDF82
-:103FF00007A89E24F962E3FB3502BFFE632CD71F9E
-:104000006727ED6C3A01F8183C24B14DD03F78FE9B
-:10401000AC19EDF1855DA7CC6877371E3A6546BBD4
-:10402000BA11EB304EE31E33F1AB78781F1F6BD41F
-:10403000C5D1357BE2685ED11607ACA771B5E4C582
-:1040400014D9F5CFA6CFC6FAFA55B84BE0EF330F27
-:10405000CE4674A9F7776FC1F25AD67714E3052BD1
-:10406000027A3D7F65835E2FAF6FD2EBD3D7EE84AC
-:10407000D301F9756D73AEEE3D861A32AC678538A3
-:10408000CF15CEDBA3C6F1588FB987231159937F83
-:104090006725DF01947ABFC5C22E89E8B8B1D64240
-:1040A000FED7A3793C7F3EB8D6487941414407AC5E
-:1040B0003749C29FE523FEA8C9EFD99D678EE5E287
-:1040C000FB6B4D040716F245D1AF5F2BF0E9DADA4E
-:1040D0009A0F10CF6AD51BB91C1FB3DF44FE9500A1
-:1040E000D7C755E1FFAEEBBCA33A03F5CF8D12F96C
-:1040F000375636E8F5F57AFC05F5B766291C7121C7
-:104100009CF4EDD736EBEBDBC70A3956CA4A914E21
-:10411000BE375692896E44FD4F79BF78250213DD74
-:1041200022F97721DEAD3547C6A35CBB450A505D59
-:104130006B87E78D5CEE70796F008A22BE6BE27E42
-:1041400085D03A89F071E510F91FA31F1887D68F23
-:104150000A7ED26AF56F247BE93949417DA45AF67B
-:10416000C9199E417B361E1F8F093C7F85F57970EA
-:104170005D450874807FD1D2B430FAC38A9E5F4512
-:10418000F98D451592D740F46C60CDE558CAC41F2F
-:1041900050DFB4425964ECA8257E3DC1ACF0FC412F
-:1041A000278BE503BE479884797CB8749C77FEA87A
-:1041B000DECFF01C17EDBEFD0CF23B7781AFFC0E9D
-:1041C00058DF0E2B9F7FC7B312E9AF8D9E63C417D4
-:1041D00073004D70DE46A7E08F9DC01FB5FDC3790B
-:1041E000E720BFC20B210B3C34EF082D3EA0E5D7E2
-:1041F00046AA0C1780EFE488798F97A9B4EFEC1BDF
-:104200003B24DC771E0B6D423FD18FC7327AAE95CF
-:104210009A1F7FF960BCBA06CF739DB3CF4CFAB733
-:10422000885727E8B764ECE404FD7C4CE747986DB9
-:104230003C9F8A71E5F5CF155C34AFC26831E8E880
-:10424000D5A4D874743DBF584FE70BBD7AFABE723F
-:104250006A81AE7DB1AF54D7BEB4A642575FEE9F20
-:10426000A1EB7F55ED2CBDBDEF9CA7EB6F5597E8FB
-:10427000EAC9C557EBFAA778AFD3F31B4707E50F99
-:10428000982DA1BE808AF7E6199B9A31C8AF4B538F
-:10429000A13394B60AAB1DCBF68949113CB7F69110
-:1042A0003C9E9AF4E2B79C11847ADA63964A287F9E
-:1042B0002885AB305E6411765EC9AD4CC7CF1795CB
-:1042C000723CD74A5371401907E7E339A0E6F27C04
-:1042D000E968099E8F051D8888C74F5B48EF9810D5
-:1042E000A7FFBE5256692B467FEBADBEB9E497EAF5
-:1042F000640ADE97DD67E6F94CA1A779FEACA7B3A7
-:10430000CFE08BA1B7BB8B397D7EDF5F45F9498D4F
-:104310005D20CD10BF77BF6346BF5D6357772ACA64
-:104320008DF1FE77CCA85F0F3E17F244EEB761FC2B
-:10433000F2898EC47968738ACD34FE31C16FEBBFC8
-:10434000C5F92D20DC02B48F34FE597F90EFAF7E8B
-:10435000B999E85BE3A3C03F75F1B078BEBC726663
-:10436000780BD22EF0519DFD72EDB2391FA03DC4E5
-:104370005884F418E0A3FAF6515B89BEAF8DB36F91
-:1043800026150FF053CF05A097937E43C27D2D2DA8
-:1043900095695F2703B308DEDF07B8A1DDF8FD21CB
-:1043A00070E2F0FB3CF83C2EFC89DA39C5F7AB2D06
-:1043B000E5FAE8E3C3F0CB3DE21CF749D17264664D
-:1043C00041BF8DF074A5C5B21CF30C8EE57DBA1506
-:1043D000E309F53F96D09665BFEE7E311BF30ECC18
-:1043E000078F66633E44B0E368360338AD35A99B5A
-:1043F000502F063CF06E827369EC8CD0FAD775545E
-:1044000074E3F3759D92175961F0D09939B44FD682
-:10441000B715F5F87DC3ACEBBA62AEA7AC2B56A9C5
-:104420000C06604E94B38792C88EAD3F087C08D7C7
-:10443000F5AC44F730F66DB3D426D24FEA4BF9F71A
-:10444000185ED866661847590BEFE33E8EE51D33BC
-:104450005B106F0E4A6413063B4E2C477F7C70A3A3
-:104460008961DC565BDF8779D1DFE0FEDF5C6D625E
-:10447000786FB075358FC7BEB9D148E318AF3751E3
-:104480007DC51A9E277C64F5EFB6E6C2B86FAE957F
-:1044900028BF7ED6F5FF790CEB2BD6703D281E7F0A
-:1044A00007F0350E3F5704F47837044F1BBE1C9EAF
-:1044B0006E1BC4D3F12867E1DC67E720FEDCCCE8A3
-:1044C000DE62EDF923A61C586FFE56C58BA1DD32C6
-:1044D00063784B36F28523BC7DE2DABD12E72F2AE2
-:1044E000DD67CF6D3733CA532CE67C680F9E5716B5
-:1044F0006EAD5FC2BC362647F3717D2E91C7F5A421
-:1045000089D51E443F92CCF94BD933CEBDB17EA4A0
-:10451000F9021F35BE570AF6FE41F243778CC47B81
-:10452000E68F9BB87F6CB418AFB0A07FCE6228BB7B
-:1045300004BEEC17EBD0EADF10F8CF3AF6911C5D21
-:1045400068E1709FD71CA9C37DDC20071E43FEB71E
-:1045500060F42FD6A25C6BCF7FC913203F5709C9E7
-:10456000B5A0388F23D3DEDBB301F3EDC6D9E81C49
-:1045700017F7DC13C5736D74CB9467682D9C941387
-:10458000B8881F21784ED5DDDB6BEC3A33C79780B6
-:10459000AEAF13EB2D13F7F35817F71F003F96A795
-:1045A000960FF6D3F6AFF93DAC850FD2396DF826EC
-:1045B0009BC8EFEDDF417058B9F68484F752AE32F4
-:1045C000F94C7680F32FD2D872B4835F6A61744F4E
-:1045D000ED38DE570356F24A8B42F5A8B8B7F65AC3
-:1045E0008B4AE55566FFAB089FE52F341522BC8E3C
-:1045F000E4DDEDC7EF309C3E2EF459A6F07B8C0233
-:10460000F7CE76199905DACF1E92C2E43411EBBFCA
-:10461000E6DC4816007EF22B713F6E5DF3EBC4E7DB
-:10462000BC0D67E6A09D3171EDA9AD580F36FFE7CF
-:104630001CD41B7E037202F12BD82931278C5377AF
-:104640002E83DE5FD779C28CF6FCE386FE3908FF45
-:10465000D06189EE55059BCE10FFDC23FC2B69E36E
-:10466000781C31D835D140E7E92BE1F68938FFEEE7
-:10467000923FA722FFB234ABAFCEC073EC35D23934
-:104680006EAFEA4F55129CCB491817F3477E25F2BF
-:10469000F186F0597388FCB2B5026FE3DB93C7195A
-:1046A000343BDC24F2949804EBA913F8558FDF8394
-:1046B000C9403D5F8AD8806EEBBB66917FA3BEE99F
-:1046C000E2DF77190EDF2EB56C64DCBFA1D5D1FE19
-:1046D0008ACDD742FB4B7F0F3DC4EF71E5B9730222
-:1046E00017D1EF827D23297ED2D8CE285EB2EE5C30
-:1046F00009951F3D7B1BDD7BB2D8FAEF46B9C08A16
-:104700000CA4D7AF0BE9F59B4F4B381D7C5AC2E97F
-:10471000B8601CD8271636609F801D5284FA0ED8C8
-:1047200021A93D4C679FC43F27FBC422FC86A02ED5
-:10473000059E4CB0EEBF9454958ECB42BADA49F840
-:10474000CD00BF11AFE2F739651C5F9746CF2B7ADA
-:104750003E30A3BE1BEC4C4CCFE6D2CA2938EEB695
-:1047600061F2EFCE8B7DAEDBCD085EC1DD1904A713
-:104770000FD96E7F15E0E587B00EBC977EDAEF4F5C
-:104780004E87F74F07FCC9189FD3E8BF71B78DDE7E
-:10479000DBE65E9289DFD1982FF0FEA3CE59168416
-:1047A000F335BB39DD69F3FD26B22213E967B2A9FF
-:1047B000DF8CFEC9515DA75251AF9BFCECD24CA4DB
-:1047C000BFE1D639A384F3E575CD2397D3BD1FF898
-:1047D0003102DDDF24E4587073C48CF0BFA9991155
-:1047E000FE763FFDEB46A4DF8FBA921594931F3EF1
-:1047F000971C427E7FFA7052D80043AD15DF3FFA16
-:10480000D0D4B788F4C7678D94AF103CFCC7BB9178
-:104810001E834F27D13D9A9BBA6E3B83726E6DD734
-:10482000DC0F642C1FFBC7D2C3BAE6D1CB63F38B7A
-:10483000FFD8726024F2CF8F64CE276EEA7C8AF4B0
-:10484000D99BCE9F1D8FF9831F3EF79729C8CF8232
-:10485000CF9F9D827C2CF8D3B353B03DF84C72535C
-:1048600022FD646D29F79F68F2D1F586ACF3B3643D
-:104870000B79E06ADB5983DF29987C6219C501B4A2
-:10488000F6C985063FF69FFCF3EACCEB63DE6B8B43
-:10489000CA942F31E94475F2EA18BC4C2E35697E72
-:1048A000BA4BF38F883C04CD3FB22D2AF37B750DB4
-:1048B000C630E6F1AE8CF2F87BBCDF8431FFFC320F
-:1048C0003CEF35595EFC3E0FDE4BC7B8C8E99B0B89
-:1048D000C3742F3D6439EA8ED18356440D9124F47C
-:1048E00083742545501F5A11954F25C5F8457EA361
-:1048F0003CB905D5F81501BD1F23DE0F023F297213
-:104900004CFCA47E63C4A4C9A98530FF2FB6300532
-:10491000E33643FC23B55F253F4CBC9F448DDE65E9
-:10492000C1F75437FF9E8EA667E2791D4A40EF1506
-:10493000829E353A6A8B1AE81CDAA2551637941E05
-:10494000414787406C86302FA86BE94368A7B79D25
-:10495000BF2A19E1D5F6C61286DF8B38AD54590A45
-:10496000F1BDF35FB52CF70CE2C710FE318EF3C733
-:10497000017D601839F7A1E05BFF2879F7C13F8915
-:10498000BC03BBBA1FF937D8D52BB9DF83DBD5F110
-:104990007242E3BFDAB8AA38E7A1FCF703D25FC0DE
-:1049A000FE25FEAB96A8D46F54D7E24CB28BDF58ED
-:1049B00096A9DA878E5F207B0D199EA1E36BFA5AC8
-:1049C00030E43B6A413BC6C7F34F83CB24FA6E54B5
-:1049D000D02F919E1DAC3385B15D5B4F74198F0B49
-:1049E0002EF74AF41D104DFFD3F4C381F649D0EEE3
-:1049F0001AD41735BD30EAE77ED1653E13B55F6541
-:104A00000EE4944CC6FD59E9F9E4697C5CE0034787
-:104A1000D1FF79D5D724FA4E97A62F6AF819AF4F50
-:104A20007EDC5570D1EFCFED1178A9D1D7E838BA37
-:104A3000D0E4D47C81EF8D28A733514E7F66EEB34E
-:104A40000FAF77839C2E2DA1F718BD3FE9E7B23F4A
-:104A500091DD7D588C3B433BB7E80B95B8DE3C16A7
-:104A6000A5BCA8E1E467AEF0D30CD73EFF12E9F88D
-:104A700086927F2C1D5F57F2CF41C703FA9F39F111
-:104A80003EFF52527913E2AFCDD844F7A3D8CF4CB2
-:104A9000E4B78EEFA76AF6A4CC74787C34CF6C4070
-:104AA000BB27D8C0EDFEF674F555B24F5EE4F7EEC5
-:104AB0006F12F94A379E53A86CC70F8361FBB75C2E
-:104AC000E4B7B9F1C009930FDE5FB9519A88FEA02F
-:104AD000950DFAFDB467F9E6C6FAC1DB4774505C80
-:104AE00021F450818AE3D7E366D11FD23E328CB1E4
-:104AF000C746F4E34CC0E731F72D609E75E2F90C30
-:104B0000E1DF61717AC04FBBDF247F0FC685907EE5
-:104B1000CD5D12E585047BB9BFA3B18BF385F71B8F
-:104B200024E227EF8BFC8C60B395FCDB9A1EF181AD
-:104B3000E8B7E66689F4BD217A854F1F7759F7E01B
-:104B4000CF892FC6EB111987F838186F41BFCCD128
-:104B5000BC2912D6D7815D88DF250DAAEA95B97CDC
-:104B60007D2C4CFCC5A7F3A37CDCFB3BB223573E5A
-:104B70002BB14CD23BE2E22FEDF3E2E22FC78EE6FF
-:104B8000E23842CF50E03FF41FC6EB198D9D274C11
-:104B900068177C5E9CE59912BD5F708CCCFDAC63A0
-:104BA000BA2405FD4963049C2EDB662338CD797B4E
-:104BB0007526D2B9763E1F2DE6E7F5D19B9F54E2CC
-:104BC0007B53DE9615E4B73F7D73E3EBB9BCAE5A79
-:104BD000547C6F6332DA211FBDBD3E19E1F85328C2
-:104BE000F1FB48CF9C9413FA0F0B4B39BF01F976B8
-:104BF000BC84FCBFC26F2C837C4B19F4BFC4BF378D
-:104C00004BBCD78EDF2D42FC7B96C7B7DB4704E653
-:104C100051FD9E7C9E472C737C7DAA2B5D417DAF10
-:104C200014368B71D81FD9581BC657DAB3022F110F
-:104C30007DDC6320FC85F7F977270EAA24EFF08A44
-:104C40001DC63FC683ACB1505EA383FC37DA7761E3
-:104C500046801D2ABEA3B00CE3AEA5220E32DEC6EE
-:104C6000641C7F8729B07D1CC65DBA65EF267C4732
-:104C7000F666E27790E2E3315A7C588BCB6871E2BA
-:104C8000E1E23212CE339EE359EC774EB4F80BFBDF
-:104C90001ACFDF6C9DDA44F75F7B31469238EE32F3
-:104CA0007A5C82784AE938ADBF3E9EB6BDF849C20B
-:104CB000B72F1A47BBA164B8F9556E77C6CD3F2907
-:104CC000FDE36CB25FFEFA5FA924CFBACE92DC3965
-:104CD000DD9F24EE71F6713F759789ECF5D360077F
-:104CE00065C5C8B3F6717CDC9EAE59848F87A2D5AA
-:104CF000C9D8FF09F17CDB1BCB96A23E1D8ACA3CBA
-:104D00001F9B71BBE650549ECCF5832170BAAC2436
-:104D1000417CCA624B9C07F49EF017BC27F63DEB22
-:104D20004D6EAF0437F2F88122E82D5863267E726B
-:104D30002C2F5BD2FCC83989E20BCFF6139FAD5FF5
-:104D4000C3E3BB971C5FE8EC36B1FC047EDB9A3909
-:104D5000C46F2ED55FCBD00A9E32C89F2B4BC5F7B0
-:104D600086CAB8FFF6C5127E5F27A36962257EEF6B
-:104D7000EEBD61CF3B70B0F4D2E27CCF7B2EAD9F15
-:104D8000A138513C7068BFA997D86FCE25F6BBA15A
-:104D9000F8D2D6D77589E3EDBFC4F16E1997A8DFB5
-:104DA000FFA3F1CFF8F8667C3C343ECE99F4E2F5EF
-:104DB000216CBB4DBABD3F82D04D7DBA5602529593
-:104DC000D31FB4205F5B308DC703B6555BC27BA594
-:104DD000C1B8A806AF87CBB8DEA578CE84F0BB8873
-:104DE000A37DD1EA4CA0E3D3D318D90DA7ADE27BC4
-:104DF00048B23262319D9F42DFC369B7268E2FAD24
-:104E000014E30DC7475E29AB7CBC7432DD1F4AF842
-:104E10009D8AEA526E67289D8CFC354C56472CA122
-:104E200079D5112867D25EE0CF53238CF2FBA0DD49
-:104E3000B584F467D585EBDB25E25E19F38A5CE87F
-:104E4000A7CB00798B71913B303E427E7D85FA691C
-:104E5000F34DF2F0F97699988471ACD0389E57C131
-:104E6000D42788EF68718DE3A6C8EF574914D7E8B7
-:104E7000C5F5BF6C8878F6B9F8B9207C3D87148AEF
-:104E8000B7BC32EDE162BA172FE21C1B14DEE50855
-:104E9000DA19B08E0DCF5510FEAEEC99F6CB3AD4A0
-:104EA00007DD32C179881E2EECAB93C23ED4ECAB49
-:104EB0003EB41363EC8DB784DE9080AEDE2A4D40A5
-:104EC000A7BB246EFF865EE6F66F85D95B109B4F0D
-:104ED000F5BE80FFAA08F7C36A76ED785FD8900D1B
-:104EE00070A8B8D9184902395DB1B5CC8CFCBA624A
-:104EF0006B9E8DFC4AAB0F1A3478273AF78FC53A70
-:104F0000B7F5F6535CE2A9F87BE61E33B5EF15F86A
-:104F10003309CF16CA0D85722B8ADFB4998A319175
-:104F20005FBC1EF47E5CDFAA76BE5E2D0E521F5162
-:104F300067E13CA78EF66FC5B2BCC1358BFC866BB2
-:104F4000CF6C45B9193C7FF6D815E40730AB89EE34
-:104F50000B3C5B6624383C858A08C26BAE4C79BB3F
-:104F60001573653AEF8C7A2BD9E1192666C4EFAE3A
-:104F7000662CE672ACBCC6310BEB6C593AC9E1F257
-:104F80005E35FD7ACFA09D9F31776316C2E9F3E2CB
-:104F9000439ABFE02AB32FD333F98BC787D61D7F3F
-:104FA00083F2CCAEE9D3C787B478CF70F1212D3E20
-:104FB0001BACF944174F0ECAFD73D0AF52F1DC2978
-:104FC0008A0F073B25C5E91A8C1B050F9D31137C01
-:104FD00045BC08FA9BF1BD0A38F61119F8BD011E4F
-:104FE0003F7A1AF371CDF83D3D85F26E7F82F9B8B4
-:104FF00045F83D3D9E8F7B18F371CD78FF83E7E345
-:10500000F688FCDE60D7198A374DF30CC9A7A27861
-:10501000C42D927FA6479F4F45F5F87885D1C6ED00
-:10502000D060AF89BE771E3C6E213E5BD9B56A0C5D
-:10503000EA63DA77C81B315E10E35FFAC8E7B5E2CE
-:10504000FD9E8FFC5E2BC6092ABA3F30ABC4772287
-:10505000B998C2D42847CD68EF231C28CFAFABD274
-:105060008A70FD5CBF7EE7FFF7EB7F11BFFEE13288
-:10507000EED7D7F847B9DF40F7CACB7B7DD6EB63D5
-:10508000F8C3363FF70F6F73E713FDDDE5CF4F5FD2
-:105090001DEBC7AFE1F65BC65CB735F6B9713CFFF7
-:1050A0001E448694F87EC1768F61383D707B62FD28
-:1050B0002E713C605B0DE7239ABF7F687CC0FBA22A
-:1050C0003BC6CFFFD1CB16FA7B0ADDCF26913CFF42
-:1050D000F4B9A47DA87797D7AC1E9302F5F2934953
-:1050E000CCC5E5912EAEB0B2C6E0B3A6268A23F8B1
-:1050F00072E97BA1F1F1821A03F1F78178418D7C8D
-:105100008AEA423FBFE6CC7B29F8E9EBA7A4703BD3
-:10511000DA174FAD93BCDD6C68FC0006CE655361B9
-:105120001735DC4EF0D65AC82EF8BCB842DDA113B4
-:105130005BD04F3091ED6CC7EF4F4E741B14104590
-:1051400009E20A3CBFB35CE811F1FE01C40F94FB15
-:10515000F17EC1E7C5F93D2FE4FE5CD4F9B306C783
-:10516000D1DE8B3F77479974513FA32CE4565B4DBA
-:10517000F9363CB7D0020343FEDF56536571C78C46
-:10518000F79A87E7CDECC2388523364EC1E311F19B
-:10519000F1098D3F55747F3607CFFDAE2EEE3F0AE5
-:1051A0003AB93FB3E27025DD33195C27DFDF5DCE0E
-:1051B000817B86E98CEF8B59B89F8BFC0AE50B3E0F
-:1051C000E9C1BF37C0FCE9F4F70B82C7DDAD76E477
-:1051D000230BE4C9924AFEED017F37FAA396BEDAAB
-:1051E000300FF3812B964F3C81E7B2BCCE44794718
-:1051F0004B5FADA5EF8A6BF2AA62F9DECDF8F768D6
-:1052000096174B5EAB8AED3555D83EFFB1087AF65E
-:10521000D8425C1DD04BF438F4CE27FFF6C7483790
-:10522000158B85DFBB8ECBD5E55D8B4DFCE3567AC8
-:10523000397724EF53B29BCF7655903F3B13E3ADC4
-:105240009E413953F11CC89F9441F9F3F7CA1D4799
-:1052500019CFF39F00F207D793B198C705E3CFFFAB
-:10526000350F3FFFE1E4C970FC13E507FF7B3BA16D
-:105270005CC939287755B4A72F1B94BF4A27D4732C
-:1052800086C7BF7902AFD387D1BF660BFC1C365FE0
-:10529000A3F31FE3F7AE2CFB27F17B0BFB46F37F59
-:1052A0006BF6D07D02CE5AB947F08DBF3B5F1985B2
-:1052B00062C27CE58CC4F9CAD77448F41D1691AF5C
-:1052C0007CD4CC2A0F3A304F4FDC4B08FB49BF3916
-:1052D0007AEFAFB63EE2C07B09928262675DC70992
-:1052E00092CFEB409F213DA8EB8FDC2FD5C1F34B34
-:1052F000D775EAEF3F68E5112197AB613FE44716A8
-:10530000797C730E71BA0EFACC61D5857EA16FCB14
-:10531000B17EA1A01ACDD2F203C35C2E25CCE36BE3
-:1053200064FD94EFD7D82079511E7C693F918FE7B7
-:10533000F75DAA9FA8AD4CF885849FF99152CE0FD6
-:105340006A039284FAA8C5E05F4BF9BD8725255111
-:105350009EE8BD02DFE70B3FED7E33C783FDD3251B
-:10536000CAABC57B3178BEFB0FF3FCF9FDE53C7F92
-:105370005EF3CB6A79F1E306FDB2741F46CBA7D783
-:10538000F2E3B5FBA18B77DB22A85FEC3075389197
-:105390000EB5BCA2F9A88B601C467C673C7E9D5B69
-:1053A000CB2AE79751BF61F59BFD6509F49B33421A
-:1053B0007E3E56A6CF238AD1CB9F289BACD3CBA9C8
-:1053C0001EAF97FF4FF965E70CEF17365CA2FFEDB4
-:1053D0005B97D8AFA12C817DDD6A4DFCBDD0D4F1A7
-:1053E00082FFC6FDBD1136E47E0F976FED92FACBBA
-:1053F0001914E732519C4BE32FED297CFCB7055F74
-:10540000D1CA7382DF0CF75D49E378DE6FA3E47BDA
-:105410000BCFB1F480DE4F56D6A1F7934DE8CCD038
-:10542000D5274646EAFA57F4E6EBDA27474B74ED00
-:10543000979D2CD7D5A7F54DD7F59FF17E95AEFE5C
-:10544000957EBD9FEC8A734BE2EE1D71FCAE048C21
-:10545000887D6F96E5EBBA7EB90DFA7DE535E9F703
-:1054600035A659BF2F6D5C5748BFBF8276FDFE320F
-:10547000D07FEFF9F2FEFB4D1E55F8EF0BE8BB7F36
-:10548000BB6ADCF49D6BEDFE9FD6EFBF0137C3FC1A
-:10549000BB80700000000000000000000000000061
-:1054A0001F8B080000000000000B53E16760F851FB
-:1054B0000FC15BF918182EF021F8F4C01CCC0C0CAD
-:1054C0009C40ACC8C8C02001C4FC40CC06C49E0CA3
-:1054D0000C0CFF81F81B10BF05E22740EC0CC40741
-:1054E00058B09BE3C6CAC0E001C4DC40B3789889D9
-:1054F000B7DF8917C17ECCC3C0700E889FF1D0374B
-:105500000C061B5E27403FBB7E43ED3A2932F0FE7E
-:1055100006612131609A1447F0A78AA3CA0B8B2138
-:10552000D8C9D294D9950FD40F00F19321F08003FC
-:1055300000000000000000001F8B080000000000B9
-:10554000000BED7D0B7C94C5B5F87CBBDFBE92DD16
-:10555000CD26E44900370960501E4B80C84BDDF072
-:105560003252C40411828A2CAF10027914A9A5FF0B
-:10557000DABB0B2804AADE5851A37F6A17041B2D3F
-:10558000DA80D11B6DE02EA208D56A684551AB0DBB
-:10559000888808498C8F6AB57ACF3933DF66E7CBC4
-:1055A0002E89B6FE6FFFBF7BC3AF1DE79B993367A4
-:1055B000CE3973E6CC9999B3268385192E60EC1BFE
-:1055C000FCBB9C319B893136A62B6D573A86AB3993
-:1055D0005DE5B7F9BDCC6B66ACCE6FA5748B3F9D16
-:1055E0007907C3779FA1306867EC5EBF8BF2BFF08D
-:1055F00017525AEB2FA27A77FA4B287FBBDF47E985
-:10560000667F197DAFF157537E837F0DA59BD445EF
-:10561000692C05FA66458559C98C553D9393B71990
-:10562000725B668D4F504743FE15233366017C9FA6
-:105630004AFD31D5BD69E0E8AE7A1A9E9BD449FD9A
-:10564000104EED128E17B3325B8C7A5938CE3B97E1
-:105650000878F6D69A9CE4A8F50623BCDB4B00DE5E
-:1056600050287085AC39D1E15D8CF03697A8BC5ECE
-:1056700072B0263B3A3C0FD6ABB941C04B0F5863D2
-:10568000D41B83F536DC20F0EBE7ABC98ADEEF787C
-:10569000ACC75CEADF5AAD8CFEBEC9C6FFB7BB4ED5
-:1056A0005D2CF246CC263136AEAB9D3E652CC070EB
-:1056B0009C2AF315121FDC995F7F93CFD84D0813F6
-:1056C000DA0726B19011FA0F24B1E0FA2CA9FE4CAA
-:1056D000AADFDAF7EB6F52A5FA014394FA26D6A0B7
-:1056E00060F9CF518E80EFF7F97329DD28E4E7BE2A
-:1056F000A106C6B05DBA393808DADDE3F790BCDC44
-:10570000ED1F4BE5770939FC7721674121670FA22F
-:105710009C41BA15E5CC8CFDF95A4B014EFBDE7865
-:10572000B6D94DF2B598F05419C1DFB077C8F6CDAF
-:1057300000FFBE1B569DDE06F46F6B1EE63142BDB8
-:105740007B866AF2C5BC2CB9ABDE3DB34F38170D72
-:10575000257A97219CBB3D827F2A0C2CA2DEDD336B
-:10576000C2F52AB0DE5D9E30BC5064BF774D09D7CC
-:105770005B457C56584983BD3B5F763085E6230800
-:105780000AD1D784F48579F9EC80EB9456689F921E
-:105790009C97C6A0DDFD381FCD38EFDC4417AD3D2A
-:1057A000D2D907DF332CAC1AE10365F71B015FD3B5
-:1057B0006C7722D2E5F66B8B98328CB1BEA23C3569
-:1057C00050A464015CFB9C2205BF9B6643397C7737
-:1057D00089F2E435BCFC762C7774952762397C4FCE
-:1057E000AA8672C8DBE7F2F23BFCC089C15DF536E0
-:1057F000019F7DC4EF74FE1DD88AF4318DE6A98621
-:10580000F713282440BF83988EE9C27FD3A07B334F
-:1058100016DABBF0B50DAEA7BC86DFA6C17194D772
-:10582000F0B15DD82F6321A47D97F465DE5C311F54
-:1058300058773A277AB3A5F24CD593A0029D325FF0
-:1058400032B200B02013C413E1E9DB153103E1D912
-:10585000E3FC4BEEDDFC330D95E9A0A547053D3497
-:105860003A6CEC2FD3C13240A6C3C601321D2C17AF
-:105870009C9F0E3B989BE81C8B1E5ABF9B87C8FDC4
-:10588000C65D24F7BBF922B9DFB88BFF39FDD664BA
-:10589000C9FD5AB3E57E6BB2E57EAD39FF58BF4C0A
-:1058A000F5C064407DA5FD5D28E9B7AB99EF2CB646
-:1058B000473D87F349D373A6641FF3D9BBF809EBBF
-:1058C0001463F99170064B7A15E07C8AF5008EF727
-:1058D000FC705C3A3883F470BE16F8B0483DDD0DBC
-:1058E0000E1BA81F8749E1ED428688FE99EA6345B1
-:1058F0008EC8761E5DFF39FAFE9D8A1887E1BCFDD1
-:10590000BB7574CDD6E39326F06186F3D183B97469
-:1059100070B2F470DC029F90725E386EFD382E1407
-:10592000FD071469FD027A0CEB6AD70EF8D13A959F
-:105930006709EE04FD10DAF7E5295C07CE355EEB6A
-:10594000B640FDFD232DA1CBA1FC5CB0206881F207
-:10595000C94F1E75A21D53F1A451C572C33E1BADA4
-:105960002F6D3B142AAFB2B4DC3901CA3B9E34B26E
-:10597000EDD45DA601C7774AE81416E2F9521BCFB1
-:10598000566CDB7F23B62F6BB2301BC0AB787AD955
-:10599000CC09905F76C8C4B04AC5CEB5E6BE905F6C
-:1059A0001E541A300FF8D23A15C8B3057742FD7568
-:1059B000FBBE6C43FCCF359A06213E67609D70C3E9
-:1059C0003AF192A3257536D0A73CB87B1AB62FDFE3
-:1059D000A57840C301FE3B0F6620FE8F281E0BB04A
-:1059E00070457D3C7347CC97538D461AEFAA6D4A9C
-:1059F0009001BC65AC761AD2B302898378782C41C9
-:105A00009BD235DFCEF8EBA83F2D5FF108F407ED10
-:105A10002B1F573C38E44A03F3E13C6E7BDA56F225
-:105A2000901DC7BBD63CD881E3DC68C67ACB820B1D
-:105A30009FB2B911CF6DE66988EFD66DE6D2A14865
-:105A400047B6A06828E2F77F65FCEA8C5E1CEFAAE7
-:105A50009196ED46C083D943036739BAEBD933B089
-:105A60005EB923D6CF72067A9FD6EFA0B97858D701
-:105A7000F72F0D89A43F56D41B99DBDAD58F261F4B
-:105A80008123423EF63A88DE1A3F57B9F814D0F81F
-:105A9000B92A51F057EDC89F35AC3B3E77225FC81D
-:105AA0009E7651FA0B583731DD02EB3CD2EF5EB0F7
-:105AB0009FDC64977BE8FB03602761BA15EC244CFC
-:105AC0001F043BC92DEC24ACB71DEC244C77809D02
-:105AD00084DF1F067B1CD37AB0C7F1FBA3608F6302
-:105AE000BACB1FA0EF8FFB6B286DF0D752BA07F926
-:105AF0000669A33F48F59EF2D753DAE46FA0EFCFD3
-:105B0000F89B28BD5DD0D1399115E03AEAF43217FF
-:105B1000923D6986B7C004F9A4229E4FBD21506012
-:105B2000867CAA0FF24097BE2B430516C8F7ADE658
-:105B3000E5036E6193AC901F10E0E5D9B77B27D9E0
-:105B4000209F5DCBCB076F0D4C8A83FCE0202FBFDD
-:105B5000685768523CE42F6AE0E5C39BD9643BE494
-:105B60008787783EEF25EF6407E4F35A783EFFCF4E
-:105B700081C94EC8E7B7F2F6E3CF068DEE28EBEF0A
-:105B80001E937B31AA9C03CADB5E3503F266F74D98
-:105B9000A8128F2AA728DF68F252F9FB4ABB578563
-:105BA00075BED1ECA5F22F94CF29FF94C947E5F13A
-:105BB00006A580F2661F95F737C451BEC914A0F23E
-:105BC00011863E3C6F0E507981A15F01C27FC614E1
-:105BD000A4F26B0C8378DE1CA4F25FA8C30BA64072
-:105BE000FDC70DBEBDA8EFD62BBE32B40F99DA901B
-:105BF0008EFA4AB32B77E2E0D0CECC30D33CD8F348
-:105C000087FC87681EE05F32E64B1F46BB14E01C32
-:105C10002438268063EC194EDECB632538792F9724
-:105C200069705E2138B6DEC1D9F3F278199F97CB3F
-:105C30003538C7088EA377E3CA7B65A28CCF2B2BA0
-:105C40003538C7094E62EFF0693C2AD3A7F168984E
-:105C50003E67707D589FD23B7C46BF26D367F46B6E
-:105C600061FA7C4CF864F40E4EE36B327D1A5F0BE4
-:105C7000D3E72B82D3BF77E31AFDBA4C9FD1AF870E
-:105C8000E96332209CACDEC179EA6D993E4FBD1DBF
-:105C9000A68FD380F419D4BB71E5BF23D327FF9D12
-:105CA000307DD2089F21BD83F3D43B327D9E7A277D
-:105CB0004C1F37E133AC77E3CAFF8B4C9FFCBF84AA
-:105CC000E93384E08CEC1D3E4DEFC9F4697A2F4C2A
-:105CD0009F3C8233A677F88C3D25D367ECA9307DB5
-:105CE00026109C71BD83D3744AA64FD3A9307DA6DC
-:105CF000109D2FEDDDB8C6BE2FD367ECFB61FA5CBB
-:105D000045700A7CF5840F03388ED8709E3927D3EE
-:105D1000E7997361FACC213853014E4ECF70C6B764
-:105D2000C9F419DF16A6CF02827365EFE03CD326D3
-:105D3000D3E799B6307DCA88CE57F56E5CE3DB6554
-:105D4000FA8C6FE7F4A9B278263BD0BE4B649EED87
-:105D5000D0E492930D079C9037D99907C1BEA484D3
-:105D600076207C582BC92E543D9A9DE2616887CEDF
-:105D700070BA3DE8F7316AF6086BA1FD827D57A243
-:105D8000E40FFAD230E916C4D701565BA45D923015
-:105D9000364EB28712BD4952BE4F615FA97E4A514D
-:105DA000B6549E567291549EE1CB93F29965E3A549
-:105DB000FAFDAB2749F90BD64C97EA67056649F916
-:105DC0009C9AEBA4FA836A1749E517D6954BE543ED
-:105DD00082ABA4FCC5F5FF47AA3FAC619D543EA22F
-:105DE00069B3543E32F40B293FEAD00352FD312D02
-:105DF000DBA5F24B8E3D2A958F6BDD23E5279C7E3C
-:105E0000466707CAFBFFF5058CDB831966B20743BB
-:105E10000E33E5CDFB6C64FFEFC73CF0D3DC7706B7
-:105E2000E5CDCF2E7627E37E1A01C07A5FD0B7EC9E
-:105E300042F4F7DC3CDE77A10BBEDF6CF68D7045DB
-:105E4000F1477854DF3E03F98B5A14968EA9DB8014
-:105E5000699C51ECD72D5CBE3666E53F148890D323
-:105E60009AFE30FF207FD86026FB5593EF8DFD4BC7
-:105E7000D31746F4B3A1BFB964FB50FE7DB11DFB3F
-:105E80002B7A11E75995B96330E2A5EFC7923D56D9
-:105E9000EAC73AA08CFA790DFB89F07B590694E9A0
-:105EA000FAB1966C17DF453FC7705CB1FAD9983DDF
-:105EB0005E1ECF8072EAE75D5D3F1B0794EBFA89B7
-:105EC000E3E381EFA29FF7CE3B9E9C89F2782E58A8
-:105ED00049FD74E8E866B960A5AE1F3BF583DF179E
-:105EE000933F17760169C0674B4729C9C17FDA58CC
-:105EF00000E4C29C59FE6BCCB3B76C6C10F6E38621
-:105F00007EA11ECBE5FEA3A70D49349ECFE280FF04
-:105F100011766AD77E3640FBE2A5024516048C60F6
-:105F20007F5B296473C9AEE20137B9216D3A30F065
-:105F30006EEC678BC33308F26D4D93CD8BA3C8D342
-:105F4000D25AD3A9D648BF88B6BF99C472ABA1FFB5
-:105F50005D369794D7D2958A8B097F04E54FC0BEF2
-:105F600085C17EE0CFB02F6040AA774D7C9FF60EB2
-:105F7000EC6F30DF0AFB1B2C676C2DB53B21FCB4AA
-:105F8000276E578248EFCF7EF24313E9F1007B354D
-:105F90003D15FD6EFC6FC19A78F4F187F15B18E84E
-:105FA00023E5415D661AD2695F48FBDF8EA72DC1EC
-:105FB000ED48D79A4CA0A9A897CDD8EBB0C9CD4849
-:105FC000A26CA6612C63B3AB8BA7A6D12C52FAAFFF
-:105FD000023C67358E34410BD6666ABDD163EF82D1
-:105FE000CBBCA613481F2BFC4338D714423EA2FF5C
-:105FF0006B8BE4FC5CA676E581DF838DD9826FA292
-:106000005FB7D7847C2D4AE5F8CCC5340F8BB9BF78
-:10601000A3C4C5DB6AF8542D36B110ED4F03290C2B
-:10602000FDD18164AA779DB6CFD4E15762B27A8B55
-:1060300080AE250B8D44573DBE6FEE8BF71A86431D
-:106040005A73B7095D9B3DE13FCF2797B332DE9F7F
-:1060500046574D5E4E09FE9E40FE43FA3EF21FF04B
-:106060003E29F8DF25C79CFF5516DF4CE47FC7FDAE
-:106070004646FC127C9F23F8BEB456E6FB1CF49304
-:1060800043FD39ABB382EBB17E5D1F89BF307099A0
-:106090000EB5774D05B5DA0DFFB7851C5C57B3FB20
-:1060A0007964EFF565BAF1093EDC28F8305F478F77
-:1060B00039826FF305DF96B1C06D19E43F0A9AD0BB
-:1060C0002F36AF4C61A82FAA7EAAF1AD55E29B4FA7
-:1060D000E39B0EDF1B05DF6EFC09E79B1EEF56C13D
-:1060E000B7D6BA8F4D2CBB3BDE7A3C17ACD18D2B8B
-:1060F000A0E75BAD38777099D1DE29F616F439192F
-:1061000051FF9AC22BFB9C8CD00BD716154BF9B9BB
-:1061100025F3A4FAF37C0BA5F2EBCB964BE5F3AB9E
-:106120007F28E517ACF989547F6160AD54BEB8662D
-:106130009354BEB4F62E29BFACEE7EA9FEF2E03633
-:10614000A97C45FD23527945C36E295FD5F4B4542B
-:10615000DFB06FC8D5285F2F1D3532F4977DEA79FF
-:106160009FFC759F7A4C1EAC538932370EE5D94D92
-:10617000F27CCA9F4BE969BF87E4FD8C7F2CA56D3B
-:106180004D07ECE87FAC8A03BD9F0876B8F1CDB52A
-:1061900035FD70BD81F6E3196B36B6AE0D40FE00DD
-:1061A0001E46C1BC99516766A1510CA4BB6F589E95
-:1061B0003B8C11E5AD3D94D7A92CD4A77BF98CD6A7
-:1061C000E8DFDB958EC119E8277CC3C27646F8EB81
-:1061D000BA9F57B04CB42B62959F35B0B2C8F3ACA0
-:1061E00093467E4EE2344E3A698474A599CFFF956A
-:1061F0007B32263127E64383ABA3F85DC2FD350031
-:106200003269C8E71C69DE2FABBBB86B9E33EC2745
-:106210009BE476797094F47D45FD04A95DAEE27B44
-:10622000D708F5CEEE37D27ACD4207065C330CF1B3
-:10623000F39EC4EFAC2985ECAE16BFB7CFC9818CF5
-:10624000FDD15F48E9ABFE224A5FF397507ACCEF6D
-:10625000A3F44D7F19A57FF65753FA8E7F0DA5AD98
-:10626000FE00A527FC35949EF4D7527ACA5F47E911
-:10627000697F90D233FE7A4ACFFA1B286DF33751EB
-:10628000AAE9CF9EE4EFB4585FCFA0FC459133F369
-:10629000AD6C5DCDC42E398B532DEB50CE34FACE80
-:1062A000A8B308794895E42111D76192B31ECAEBCF
-:1062B0004C420E63B58F5E8EF2D6F77B9037C6D612
-:1062C000911CCC1472F75DE58DA1373E05E529538D
-:1062D000274FB21C6A72A4E9815CA568B83AA64B44
-:1062E000AE661AB99DA4C9D5CFD14E8C626FDDA020
-:1062F0002A62FDE3F611F36518D07E5B25FCFECC27
-:106300009D4EF94ED1F77A00D782F5D4602EAE2398
-:106310009DB97F1B8CFEF1CE6316867EF858E3D3C1
-:10632000CB4B6CBA7B69FF501A84456D54F7725B96
-:106330001CA7ABCDC00A591E9ECFE61FF3013FE359
-:10634000FEF3E23CDCD7C27795915D15F41447F17A
-:10635000B73394F1B49EE9ABD53FF5C097F9786EA9
-:106360003E53CCF3B803467EAE1D7AC8734DC4F9D4
-:106370000CECB7D3D1EFDC31C8EC22FB21D457A60B
-:1063800063B0AF44C703833E1B8CE71B9B400E7179
-:106390007E750E1C9CC0CE231F3DE9F99EE8B928EE
-:1063A000D8B797F434333C37027A6EC7FB2FBDA5BC
-:1063B000674F7AB227FD786233A7B353D8A7B1E805
-:1063C000DC3E09E65D1439BE475565396603F97947
-:1063D00087467FDC9746D0FF52BB9BEA3FB7EFADC5
-:1063E00001ADD04F67E385098C9FE7905DD7F1A49D
-:1063F000B0DBDD99321F5BFB125C0DCE734FBE3EEE
-:1064000000F7C9B76106E6D993F145BF5253BAE028
-:10641000F5F61C3ED6B8767FCBF9D99EAACDCF969D
-:1064200001284F9F093D10737C3DC9298E0FE05C08
-:10643000A5F0F16D3016FD0EF54C787CA3537A353E
-:10644000BEAA04335346007E0EB3992530B643F5F9
-:106450001D54691FE7690DA09F625FBC673DB0A432
-:10646000CA79E6E5901BDBC9FE8C15F536976C3FC3
-:1064700025BA64FB29C315693F751E7AC8E903FC78
-:1064800056A51B5C2747E13AE715EB1C5F5735FC27
-:106490002A1AB25C76098E9CEFAC550A1B489EDC2A
-:1064A00009B3A39C9769E9AA74B3EB24AC5767EAD4
-:1064B0007312B0DF337EAB8BAFAF2E17EF37DD1526
-:1064C000B9BEAE5C1347F535FC62C1FD67E3C75842
-:1064D000237BD78AEB2294E5C4AE1F939FEA2766FD
-:1064E0003A976E367D86F6BB2D57B3DF55CA6B7073
-:1064F000AB1A8C01CB08FCBE4BEA0FDAB9B5336698
-:106500006C175B6E54764AE327F0DF8A07EFB46FAF
-:10651000B5129F7D003101E0B5ABF61A94AB132A9A
-:106520009FCF55424E2BACAD669F9BC8DD82F2BC1F
-:10653000682CD326CCDCB7404F7FF0A289EE69B13E
-:10654000AF007A7ED7558125ACC8894ECF458D2BBB
-:1065500066E0BAFD8141DB0FD7E6E3B8CF314321D6
-:10656000EAA573EC8FCE5111F3758889FB63580D42
-:10657000DFE704E01F8E6F69ADBCEF595627E74B8C
-:10658000D9AC54D4B7A55B4C2C08B82FC77D933633
-:106590006ED0BF1926EED758C6AA37E03EFD5E136F
-:1065A000F7F72C72313513F0AAF88F5FE6A3DFC737
-:1065B00063E27687769EBC3C89E35D3E3B68F642AB
-:1065C000FD771B47CD018D0BED831BC8FE29669E11
-:1065D0009DAC3BDD17D7C8F8F584BF1E5FCD0EEA32
-:1065E00076AE2DF048AE57BCC1287AEE329322F633
-:1065F0007F7C7ECC36C9FE9C7926D9EFA3C9814920
-:10660000C8C109D577B5690CE73BF251513BCCBE07
-:10661000887AE6AE7AB3CF57CF82F58C546F9E2935
-:1066200005EB754CA3FD3103791ADA55CFD605EF8A
-:10663000460E4FAE57F11F8F3D15007929FFED3DF6
-:106640004E06EBE6076A6DAA07BEAFDC799BD30B5B
-:10665000E96935E0447E7E10341646A3C796303D86
-:10666000BC7605FD69423E594D80FC149FED34B95E
-:10667000C8CF5F6F0959404E2B1B97CF60C3297F4E
-:106680009CE7377E64C47C93CCAFF25FDF93EAE68D
-:10669000F76CB83F8985C8CEADDCF1DE345C2FAA3B
-:1066A0005807C999BE1DF6FF7912CDEB85E684EE39
-:1066B000E58027F913AAC42CAB6AFCF9474627E604
-:1066C00065F92813F62AD209F7F9B7991CC9A7E288
-:1066D000217B09BB04E7B9460F16E476EBFA47EED7
-:1066E0001B7E1CF039BBE345A73234523F7039EBB7
-:1066F0006C58FC2BAB21B61E6903398CB48F00306B
-:10670000B57337097BBB99A72B4D2127DE6759B994
-:10671000CDE40109642B1F3332BC07C0DEB004D1C5
-:106720002FBAE2B1E75F1B0F745FB1DB943C830FBC
-:10673000C7AEA476F1A50AFEB726AF8B0FE54F3C96
-:106740006F760FE3DF6F49EAE2C78ADDFBCD6C5855
-:1067500077FA4D6ED86F6EB547E14BC3F169B8CE8D
-:10676000AE7FE4AF66F4277EB04F616959DDDB97F9
-:106770006D7B9ED63BA413F151F029CCB76EFC0A79
-:10678000CD7C6634D573A11E8CC5AF6542EF823CCB
-:106790003FFE0CDEFF79D3E2C1F1973D7E9313C734
-:1067A000F1BE5ACDE5FA97B7A5E2FC2E3305525D4E
-:1067B00094F2EF650FFE88E46DD9911FA592BDC0DC
-:1067C000BC1906D2C5810C1CDFD2ADD7D2F84A99CC
-:1067D0008FE4AEEC97C622BC8FF8A9CA0A77479916
-:1067E00017716685F0797F3B183230BEF7717F896B
-:1067F000FAEC8F46BA17C5D80FE9DED88FC45861B6
-:10680000E5A3FCA756CEA7E3424FE24496E475C742
-:10681000C616E4CF99FEDE343CE7003A0404BD948A
-:106820006F00AEF1C8D434CE1FE656F3453BD0EF2F
-:1068300093F13BD66F31796DC3A576421FF2FE57B7
-:106840008BFE01EF385CAFDE4F8D6EEF8D11E38371
-:10685000BF1616215F11F39BCFF71D9BF8FCD6E600
-:106860007BB0B810CB3F7995CF1F6C87EB03E01559
-:106870004AA3F2FDB315D207B0AF8E36AF7798C4F6
-:10688000BC96CBC152A4F51EF0569584483901F848
-:1068900049447FDA07976E817611F65715F647F56A
-:1068A000CC5DDF23D68765420F98CC30FF2FEE9A60
-:1068B000FF6C2B9FF73DD9932B4DC1871FC0F9FA71
-:1068C00086C51370E37C3515E1B83FDC75E0B5EBA8
-:1068D00040AE3F6CD0E6A9AC3FF5F3B46CCF1816D0
-:1068E0006D9E7E6887FD55B4790ADFA3CE537B2B5E
-:1068F000C9F1F7AD3F35BA0D35CB7A13F5E033EE7C
-:10690000D8F4D3EBC1DF9BDC4447BD1E84BF57598D
-:106910007E77B9D3E44D93B3F2DF545C80FA262C32
-:106920008F9ABC85E5519337FD3865BAE9CBFF2ACC
-:10693000F4CDF5D6C26BD02EB67630DAAF14CC36A5
-:1069400006719F6CFD84D17C9F74433CE5E71A5B24
-:106950009F409BEFAD8AB9C3701DBF9E054CFCDC08
-:10696000BCD64476EA57DF7C3311C6739DA0EBF5A5
-:1069700040E6AB800F25AA128A033CE7A92C909031
-:1069800084FE62859D88C0E3FA32398F7F97A576B1
-:10699000C1E9A9FEB7B5ABBF6B7AC4CFCFAEFE8459
-:1069A00029ED2FC0708E90A3E2667E4E51355A09B4
-:1069B00066D3FC6B558B22F6098F99B99D7164CA19
-:1069C0003563907E05738725907CD70EA17D6095F9
-:1069D000D05B9D017702EAF3CEE61CDAF7751E5A0A
-:1069E000ECF045D15F07849C3D2FCE59DAED4AADDE
-:1069F00011E4BD9D7590DD12B0DBA2FADDEACC0694
-:106A000061EF08BEC19F11FA2F1172380F9A26E468
-:106A100045F06DF6551FA8CEEE7CC0BF1311FB8666
-:106A20007F94BE28D748DF03B6D6694551FC338F23
-:106A30000A7D7DD9B35F98719D9BD25CA0221DA772
-:106A4000D88D92BF63BB365F87B2A188D765CF2E42
-:106A5000BF630CC871D521A3C706E3AB6AFEC8ECBF
-:106A60008BB27FD3D313E1A3FDD86AE6F6F151537D
-:106A7000D152A4EBD16BF979EE9FCC9E8A6878CE87
-:106A8000B6723CE7B1A24F472BFF7AF42D98EB0882
-:106A90004D027A74DAF9FDE4EEF2C7E77DA74B09FF
-:106AA000AE55500E8D3C9FCCEFFF4E63BE3B262A69
-:106AB00034DF2F8FD45F054DC58FE17D96CA66C543
-:106AC0006580F24AB5D58C725CD5B45B45BBFC07DA
-:106AD0006EFECE82A9D5C36647F8B75ACDDC9F7447
-:106AE000E06FD7CD47FA7E3CDBC2102FEFD08F9CF2
-:106AF000B8DE7FDC3C8AE641AC71FDC1EFB9660AC5
-:106B0000FAE3CD5C9FE9E5615A72BC94BF7632EB43
-:106B100087E7BC97595A6FF244E1DF3A0B9FA7BD54
-:106B2000D66FD6FF61FA6D22E8372ED7A648FD361C
-:106B3000DDC2E53E42BFA545D36FABD6BAD3502EDA
-:106B400056EDCD4943BEAE3ABC34259A7E7B41EC2E
-:106B50006B0F8B7BD2EDFD40BF8D88D06FFD40BFAA
-:106B600045F1838FB66876670FFACDFADF33FF5EA3
-:106B700040FD1665BC5708B9D3F45B61F35AD26F78
-:106B800085FD8CD27DA4CB2CC28E8BA9DF16DE7343
-:106B90002DE54D9EF828F2837445FD7658E839ECD2
-:106BA00007F5DCCF2CDF4ECFCDB3727C7BD473FFE7
-:106BB0004D74D6F4DCAAFE0AD92FDDE590EBB95569
-:106BC000595CCFADDACBF5DCAA415CCFE9F5DBA4AB
-:106BD0006EFA8DB7AFCC85F6B44FCCBAEF06BCCF0A
-:106BE0005762F258A1FE0CB7F6BEA07A4CA4BEFBC9
-:106BF000992586BEF380BEB3F7ACEF5E417DA792C8
-:106C00001E1B88F3482F1FD307C64BF7D58E7E7106
-:106C1000EA37BFC5F9F20723DD077ADDC0F743FB8A
-:106C2000BE38350AE7DDCB880FCC979D42FEDAFCF3
-:106C300063499F4E1ECAE77BC5A1385A272A1B15F8
-:106C40003EDE5B94A01BD781BF7D4EFBE4F97BF950
-:106C50003E79AE85D383FDD8C8DF4500091646C806
-:106C600043C9E7E5E4E72B519915EDD70587A67FE2
-:106C70008076EB82CF6BC8DE5D80DFF17EC5EED61D
-:106C80000D99D0EFFCE50AED3798B80FA1DD97B864
-:106C9000BE793FDD5FD1DF83D0F4F9FC6AF9FB02F6
-:106CA0009D5D7F408C13EC59A20B7BC518D53F77B7
-:106CB000404F0F0F1F7FC56A6E1F87E901F4712BCC
-:106CC000DDE9011C9DB130B56BFCF39F8471257724
-:106CD0008D4BA3877E7CDAFE6481981BB1C6ABD155
-:106CE000AFDB78357AEAC6FDBC45D84517B36138C5
-:106CF000CF5E37F8EE188372F17B183FE03367DE22
-:106D0000A0B4483DFCA2D0E757F98E4F497523BD8A
-:106D1000F8FBBBEBCA763F9F0AE3B8DA9B9587572F
-:106D200011AEFD9BD9877E8403B60ED26B9A5C5D53
-:106D300068E572FE7701E7685FD7145A3F9A141727
-:106D4000CD97904E6F897B6155404F9C8F554D621A
-:106D5000BD0179C3F9364D5B7F90FEF09F573573C7
-:106D6000FA57552B44FF99ACE320D2B73259F1843E
-:106D700000D4B4A6DDB7E13DAA176CF01DE76D990C
-:106D8000E2D9CEC961CF488D2A976A34B964D54318
-:106D9000C8AFA0AD830BB05E12BE17793D05ED13F1
-:106DA000BDBD7199A5E528E271D98F4D6C1BEB6EC5
-:106DB0007F68FCCE857FDF44BBCFD383FC0E12F609
-:106DC000E50B486F3BD2B5C38C725F15E2EB86567C
-:106DD0005EA5BAA7107D347A37C1BA309AD31BDFCB
-:106DE0007DE9E979B5964779C6FACD8A09DB5F096D
-:106DF0007CE80345930D5F1CD4E417DF89E9E98241
-:106E0000FBFF8C88F98E7A29F2DCB1B2E908D165F2
-:106E1000FA6A30AB22E88EFAEA7CF4E9361F9AF679
-:106E200047BD07F56DE7C38556793EECB375BC38B1
-:106E300002FD5B7B15D207AC3951DADF5F61E5FB00
-:106E4000A603361FC96DC76113DDF7D6EB8DB1827E
-:106E5000FEB89F887C0737190782E7BB2E1B7B573C
-:106E6000C3239BCB4FA4BE7EC1E6233EC5823F4DCC
-:106E7000C08F652F85F1C5FEF03CC52DF7A75F2FAC
-:106E8000343F4F4FE3BA46ACF7DF755CE1F349D6C8
-:106E90006266DC9FBFDB1C71CE3447F8F9353F5882
-:106EA00044BD999631B1EBA1BF2504E37E61D74380
-:106EB000E4D73DF7E8F19928B72B7E676456E07375
-:106EC000DB2E070BF17B14665C57CB1B8D51CF4536
-:106ED000185B4FF8ADF8AD83F44AF91E4B7006B459
-:106EE0002F7FEADDE1E89F6A5BC7F54BE051211F88
-:106EF00081D6E1785E5EAEF2F3623DBC1F0B79395C
-:106F0000FB747C09EA47A59EBFEB2C6F986BB244DB
-:106F1000ECCB2BF1C08DD7A37BC8814714F28377CC
-:106F2000C76F2DAFF708D77BE54DA620BE0F2DAF5D
-:106F3000DF46FBD9AAFA8FCC68C74DFEED636447E4
-:106F4000543519653F61BD3164213FA6F138A67AF9
-:106F50007F5D656305CDC7CA06E10FD3F98B56FC8B
-:106F600076EF530120CD8A277EED443D73A665A7B9
-:106F700093FC70F5DCCFA6DAD5E87EB89EFC6F0DE9
-:106F80009BA2FADFCEE07FC0FCDB6A95FD6FACBE52
-:106F90004FAFCEC1573CF6E983782E7476CF870F7A
-:106FA00022DE2BBFFEF8C19FA27DB2CFE6C2F5AEB6
-:106FB000EAD1A3E457D7DA3D25E655DB23BF7EF8B7
-:106FC00001987F6D6F58E8FE55DBDEF707B8619CCE
-:106FD0006DBBBF4845FFE5EABD5369DFB2FAC9C9D9
-:106FE00069E7BB47827219ECC579889E0F071A8D35
-:106FF0000CDF419E3B66213B23EC476DA8E07E6998
-:10700000B7F09FEE8A7EEEA4F9FD2A1BAFB9FA52C3
-:107010005CF71A4D1E377D177EC09EFCA6AF023F5F
-:1070200047F4826FBB845F5CC7B773F81FC09F3F94
-:1070300059657FF3A78D4B7FF5009635F689E937C3
-:107040000DF5825EDAB9D636ABF71D2BCE873DBF84
-:1070500021FF34F20B6C6ED6F6D8A703D0DF70DABE
-:10706000D47123DDBFD86BA17B42E57B5FA7F9D14B
-:10707000F6E4113A2F62E25CA98D85FFF83980D8D9
-:10708000CB54ED70707FABA03BFA63DD4EFA2EFC63
-:10709000AE5C6E357F6C2C3F6C1F9BB8072ECED933
-:1070A0002A76BC65663ABFB63216F9745C3A17D4D4
-:1070B000C6AD87E7423A5C12799E10CBCF2DF468BB
-:1070C000984FFC1CA16D9B385F089F1B30D62F0F7B
-:1070D000EFBFF3F3EEAAA0F23A8B321FB5F304A789
-:1070E0004D371F83BD3B47E819DFEF460FC5C6F795
-:1070F000AD1A5DCE7E155D1F0FB129E2FD812FD740
-:1071000016B1EE2C10EB4925D08BBF27E3F89E1566
-:10711000FBBBB38F1A83B80FDED07080F4AA7E5EFB
-:1071200057B2E8F143C6DBB83EA96CDA3F1CF5CF95
-:10713000D9679F26B9ABDC75DC1C003807EB9F30A4
-:10714000B70EED9273D4D7C1087D7DF6F1FDC3F97A
-:107150003907DF47EAE15F21E05735CBF0AB767DB9
-:1071600024C15F116830BBEC3DF77346F5CEC5F125
-:107170009E6931515C94330DC6C268F14A86622023
-:10718000A9942E3A6D70F0F771C62433D991AB1DD6
-:10719000638F2524636A76E33E7AFD5A7E1F72FD73
-:1071A000CF3CE9C897F58973E81CA856474757B202
-:1071B000AB00F7D7AE2945A351ACF47A20D16B9040
-:1071C000F05EED284CC3F7DCB70A7B84A91E7ABFBA
-:1071D00067744E2BC471185D06972DEA3ACAE1997F
-:1071E000EC45142FC2E492DFD37DEFF11FDCFDE408
-:1071F000F80F817EFF68FC07467130FEDFC77F080D
-:10720000603FFF02F11F42E4B7D1E23F247FCFF19C
-:107210001FD63239FE83E06738FE83E0E7FFC67F82
-:10722000F8FF2BFE8331EEEF53303E8316FF21250E
-:10723000CE3C3532FEC38571095323E33F8C8B4B23
-:107240009F1A19FFE10771595323E33FCC8FBB68A5
-:107250006A64FC87AAB8515323E33FAC8D9B4879FD
-:107260002DFEC3DD7153A7CAF11F664E9D02F9B60C
-:1072700038DFDF71BD8A15FFE13D9C2C637A8EFFFC
-:107280000070CC716362C77FD0C38915FF01E02411
-:10729000109C18F11FBAE11323FE03C049273831AF
-:1072A000E23F74C32746FC078093457062C47FD0D9
-:1072B000C38915FF01E05C1497123BFE831E4EACA0
-:1072C000F80F006714E11323FE43377C62C47F008C
-:1072D0003813094E8CF80FDDF08911FF01E04CA541
-:1072E00071C588FFA087132BFE03C09949F8C48895
-:1072F000FFA087132BFE03C0994BF8C488FFD00D65
-:107300009F18F11F008E8FF08911FFA11B3E31E203
-:107310003F009CE5042746FC073D9C58F11F00CE2A
-:107320002A821323FE831E4EACF80F00E7A7042722
-:1073300046FC876EF8C488FF00706E253831E23F46
-:1073400074C32746FC07807307C18911FF410F27CB
-:1073500056FC0780732FC18911FF410F2756FC0788
-:1073600080F32B821323FE43377C62C47F0038F501
-:10737000248731E23F74C3E7BBC67FB085062A3954
-:1073800014FF81E24486E33F247FEBF80FCD88EFC2
-:10739000FFC67FF89F19FFE166BBEFEB38F2837EF3
-:1073A000B7F80FB6F86F17FFE1667B517C3CEE2F04
-:1073B000BF65FC87D4F86F17FF01FA498F1F13BB15
-:1073C0009F58F11F7274FDF414FF01FA1974DEF175
-:1073D000C488FFE0D1D1EDFB8AFFF045DCF9E33F43
-:1073E000FCCBC559806D0A9EFF149328B27F99B8D3
-:1073F0000BD7C6FF93E32E90B1F0AF1477417BBF5C
-:10740000DF60C2F5EA4DC1F7D7845CBC25E22F1CD2
-:107410008B197F217815F94597CBF117A60B3ECE36
-:10742000F3C9F2309DF1F386E953B278BCCC325DFA
-:10743000FC855CF9FC7A86EFC81400C7AEF2C8E39D
-:107440003822E46166C947CF217BAE1E1B3DFEC2D8
-:107450002CC18F621D5DA60BBE158BF47A7C920247
-:10746000F23CA3EC888A749DE96E55C9AFFD038D8B
-:107470007F6E897FB3055C3DBEB304FF665DC9F9CD
-:10748000A7C7FB55E49F13D2B251C43F3DDE7A3CFF
-:10749000F5FC6791FC8E889B51C0E4B80B93AD72EC
-:1074A000DC85A92E39EEC215E972DC852BDD72DC94
-:1074B000851FE4CA7117AEF2C87117AE1E2BC75DE7
-:1074C00028F6AED5C57DD8A48BFB70972EEEC3FDF4
-:1074D000BAB80FDB74711F1ED1C57DD8AD8BFBF020
-:1074E000B42EEEC37E29BFB8E6B0547F69ED1129F2
-:1074F000BFACEE0DA9FEF2E071A97C45FD07527903
-:1075000045C34752BEAAE90BA97E6FE33EBC2ADE03
-:1075100003BF26DE031F13EF81DF8C11F7E1AF3FBE
-:10752000FFE2B6C8F7F85FFEFC9BDBF03DBE41BC56
-:10753000838D15F7215C1E23EE4357FB6F1FF72148
-:1075400025F99FFF0E3FC7CECF3727C44FCAB1A73B
-:107550007CF777F8D716C9EF99E796C8EF9973ECDF
-:107560005C9FCFF3C9EF9AAF2F93DF3597D97CD9C2
-:1075700088873EEEC384786F8E1DF5A5789F1FC265
-:10758000F7A9B0363E8BEF53217D0EE33E407A10D3
-:10759000E33E407A08E33E40FA7B8CFB00E94B185F
-:1075A000F701D29731EE838A712302226E448D88CF
-:1075B0001B512BE246D489B811411137A25EC48D0C
-:1075C000681071239A44DC8810C139E13F44E949CD
-:1075D0007F0BA5A7FCC7283DED6FA5F48CFF34A554
-:1075E00067FD1D94B6F93FA7B4B7712334B9FC33D6
-:1075F000DA0D66EC9FCBB126A733EC033744CA699A
-:1076000091FDA20D28A7B1E245CC459AA6C48E17DC
-:10761000112E8F112FA2AB7DEC781169A3BFBF781B
-:1076200011FF16CFE5F51F8D1731BF5A8E67B06079
-:10763000CDF9E34594D98A56A35C6AF2F86FF1FC60
-:10764000BCAAA77811DBEC8A58AF812E6877015D60
-:1076500068BDEEE1BDFD738E8773713FD1997BD11B
-:1076600079E31CE8E52236BD795C83EBBEE738118F
-:107670003DD155ABFF66398F5FF06FF1E78F5FD07B
-:107680002D4E444FF105067D467AB2B771227A5AE3
-:10769000177AA2E7ACEF394E444F7AB5277DFAC787
-:1076A000E99CCE13E2CF1F8F231C17CEDA72901AFB
-:1076B000BBBC34B555F10EBC60B68BFC27EDBBC42A
-:1076C000BD312F73BB52F93B75B437DBF7240C6720
-:1076D000F47EDDC5BCC09F78F15DD9B57F3F9EA724
-:1076E000DFEA64DEC4248A07EF36E6E03E6CA415C8
-:1076F000FD29158D1FBDFC3B806B6B36D27DB276AC
-:10770000C0A185EC3E6F22F22D9EDD4EFB743CE362
-:10771000FAA64FE47B66DDEF37609588F39BA946B8
-:107720003BED9B3AB7F27B9E4676F17D1347D37DC6
-:107730006A167413FFC84E5D21F0ECC414EBFBAC69
-:10774000643F2E3BFC447E88F1F3CA48BF419F4210
-:10775000D94F5367730EC777952CE06D41FB7B893A
-:1077600080975224FB6F3E5C547808CFE997F84A23
-:10777000E91E425A89ECCF61E2DD386EC7C2F7E5F7
-:10778000009FD226853DA0747F475ED67CD706DC5D
-:10779000E72C0FEAED6F968B7256CEE23CB8EF5DA8
-:1077A000512F973B1CE23E879DD97B45B7D60BEF07
-:1077B0009B987C5EBA7942587F9783EEC32E3BBC80
-:1077C000D88CCCB2A4CB74B3B965BAC5E7CAF4D12E
-:1077D000D3CFE191E9A3A75FC258D9FFA5D14FBB91
-:1077E0006FA832715F34C8EF91767B87DFB48DF07C
-:1077F000D4D34F4FAF510E714FA28B5E45D654522A
-:10780000F98467861A22F9D6CF874C7B48C1FFEEF0
-:107810009F1C5C4BAD3C0E15F5563A07CD9425BC2C
-:107820005D3CCE078C2BCB3C341F70478FFEDD7840
-:10783000F66721F7EFB26F20BDA9F8B9E38BA0740A
-:107840002BCADB08FEFB0BE4AFD27E3781795CB834
-:107850008F6AF05BDD4B543C1764EE2503F13CD09E
-:1078600045E99DE2DD6FFB5046FBFE86D027A978F7
-:107870008E76675EC74CF43F542D6545B87EFDC8D3
-:10788000C9DF5D6C12E90827F7CF6C2E3230EF6844
-:10789000FC1D1E635041BFABCB7BF872B4479B4DC0
-:1078A0006E7A47ECEA78F97A2A1F45EFA3330CB5D4
-:1078B00023111FA84FEF6BDB9BDF752E8ED0C36D9E
-:1078C0004D770FC1FBC5F71BA2BFEB2D7568EFDB32
-:1078D000F8FD8E115D71064A1D63281EC19DD9D029
-:1078E0004F657127F15193CB0982FECF954E27FC4E
-:1078F0009E6C56DCE8AF9B66BCE107C300BF7147D6
-:1079000055AEBFC4BDEED1A2FED3CC938EF88EBBD4
-:107910009429387FC6BDC13C0124717529DDA7FBC0
-:107920009D73DA21E4D7946690279C0F67ED1EBC07
-:107930002A3FA645BE2F9738C57700EF175E728C99
-:10794000913EBBE498AABF1F63C4FDFEB856F9FB85
-:1079500004DDFE739D26774E968A72B7E52B23E1F0
-:10796000D5DEC13CEB006EFB92BE746EDBFE0923DC
-:107970003BB1FD2B6361B4FB25773BB8DFEB7E3376
-:1079800023FD7D7FA99DDE393C5B5A7E01DA179F7E
-:10799000FDC47741343F65849D96C0DF9F7B13D83B
-:1079A0005894C35B154EEFDA8CA228EB9626779A93
-:1079B0001C6AF297511AE78B765F33D9C9EDA34958
-:1079C000A5B98A19E5679FC290AE6DEB00AFF3AC25
-:1079D000DB01B62E13F1A96AFA98EE61599B95A8BE
-:1079E000BFCBF384C3C9EF03AE0BACC5FB1737C3E2
-:1079F00024423D9561AECD8A063FC0B6905DFA80C7
-:107A0000C3CDDF0D58451C21B53603EF23B4354DEA
-:107A1000BE7203E0F900CC07E4EFFD260FE11DA8DC
-:107A2000608CEE930A7F5DBF996CDBE608FB77AF55
-:107A3000A3E030CAED6107B71BFBF83C0AE2EDF9A1
-:107A4000FB5F9D08BFFD730BF1AFAFB037B5762775
-:107A50001D9C3E254EEF016CCFCA9249F9787C4EB1
-:107A6000F7923EE837077A47B1AFB4753DC9C7E82A
-:107A70007C22C96E089272F27ADD2EE9BE7780E62A
-:107A80008D360F584861F85E5FD36F4AB31272802B
-:107A9000DC8FB6DA4378FF2CA90CC69D8CF13CAC88
-:107AA0001C5E8B7A56F66B813CE6A371CFE8BD3F36
-:107AB0003A5211BEA6F7347D796B22D747B7DEA5BF
-:107AC000523CD0AD6AAB0DFDA9595EF7240C4D9325
-:107AD000A4BAE95E4AFF323E0FE3737E9918B603FB
-:107AE00060928FFCDAB820DA7BA60C94A714A497D6
-:107AF000EF4307A4C30F753C8BE682C7C6FAF0FBC1
-:107B000053424F08BB669A58EFC6BD67E0EF284363
-:107B100097B3C8F7457A3D0172FF27FCFD9EFBDF56
-:107B200053294E68583F944EA3F58919871E403952
-:107B30009BF022E3C751423FB8E01FD2E792977C07
-:107B4000EB118DEFAA17F4FC66216B388F3FCD3611
-:107B5000EA10CCB7C875D629D67BA1476E2A1EB8C5
-:107B60001EE797264717DCE231FA22E8A86F1FF6D6
-:107B7000532AD6F077770EEA91978C783FACBD0008
-:107B8000F80D747912E70BD03BF193E095C8F72D0F
-:107B9000CD57D850BE6F0D4D72CD803689D622623A
-:107BA0005E22F3923F270FA8837122D69350C07EA6
-:107BB0005D2DCA72A6E03DAE42C9DFA3FD2E1E0CAC
-:107BC00094F812E603C871E43D564D3EF5F2A8C99B
-:107BD000EF7ADC60E1F91D7ACC21352A0DC4200B47
-:107BE000DBEA423DABD997EBC3F65C22ED33560B93
-:107BF000BB68BD7D9A95D4C0FE645ACF57E3FA04A2
-:107C0000E35F9DC2681E68E3D0CB63D5E706168CA0
-:107C1000D81F54A91D748FAFEA73330BF6C171FBE3
-:107C200026E1B835BA8C1474D1D321DB29F69B82B6
-:107C30001EB1F1CC77E1FDD944AB976D243C27D13F
-:107C40003DE786509E15D7DBDB7478F602BF39D14D
-:107C5000F053ED31F013F1DB2630DFEF5A415EF3E4
-:107C60006FAACBE0EB057B353D827FFA7933B6A96D
-:107C7000FA803962BE687E5DFD3C19D1CCAE41BA56
-:107C80008F0BA90CCF5F7B9A2F9F88F156C5737A13
-:107C9000B5CFE9188CF2B943F5553BC9BE683560DC
-:107CA000DCDFF6A719CD67CFFE934E8A6FD4D2BB27
-:107CB000FBE99A1DA5D94FFA7A9AFDA4E95DED7EFC
-:107CC000F876A7CF8FFD2B4D209F30FEF52EBE2FCF
-:107CD000DAEBF0ADC3EFF130063C4A62B9A12CFEFD
-:107CE000FE5596FF58F21EAF93E706A013FD4E1601
-:107CF000E8FF414A773CB4FEA73813F9790BCC660C
-:107D0000D443FDF219EFAC92D1FDC97EC3990FD7D0
-:107D1000A77E79FCDE5F50ACDBDB84BED5D2BD8EA6
-:107D2000A2FB117F93CA0296BCEF8E37A28AF7B1ED
-:107D3000B73BBDF7A1FC590BBD348E4C17F3A0FD2A
-:107D400099A93628F86E3269A55BE1F7B059D73B9F
-:107D500026809739C35D80729289FB68ACDF1C3D39
-:107D60008ED6134E9364677A58384ED513D82FD8D1
-:107D70009907CD80779F195ADC2BEDDCC6A3209D97
-:107D8000DA1C7308E9B64F156E8F27727AE9F7038C
-:107D90004878C44F15F9DBCC4CB525B1AEDFE134E2
-:107DA00058C98E8F679E06D44B2F3BB3C5B9A8A781
-:107DB00006F3FFAE7658138776C9F19D13677954A1
-:107DC000A8E2BCB47338EE99409E0F23BE6D133BFE
-:107DD00007DF4AC4E818C0E5C66B94E2E268F46FB6
-:107DE0003249F4B7E13E3B520F3ACCB48F6C53E2C8
-:107DF0003C38CFDA962B1C4FC52AE206A9F2FE5F6B
-:107E0000E8234DBF763AB308FF7816A07D00B37A19
-:107E1000AC748F5DE08F7115C9AFB3373EB81DCF1D
-:107E2000A3747114F57116272FB6D3BD8B2D7B6DFE
-:107E3000B42FED2CE2E7F39DCD16D2BFB1E6691A5F
-:107E40002A83F3C40B04BA7520DDD24CD589A8F778
-:107E5000D2E6F3F9AFA7473B0E14F73B7F3005A3FB
-:107E6000BD57D7D2F4F4BEC56897A567A453AA7DC1
-:107E7000AFB3AB51EF611B1314294EDF10E851EC87
-:107E8000738C09F0FD9CEF8FAF7959D7BDF6BA38E6
-:107E90004EBF4EDFF8848751AE40E0E8F704B4737C
-:107EA0004DB19FD7E22769FD6CF15B8B31E467DD53
-:107EB000A2E9365C075298F7CA793829B798D84EA4
-:107EC0006A972BDD77BDD73FB218DF276726F07B97
-:107ED000B49F6C994AEF9953D93ADB60A0436991FA
-:107EE000C183FE80738BDE741A407E1665B6E4A3F0
-:107EF0009C26987C990963C87545FB8D6525E660CD
-:107F000008E8955C070A81E818B892E8B8D010D55F
-:107F10003F9C9DC0F79D6F89F5243D7D40F19251B6
-:107F200091F97E44574D8E60FE642C19DD150F13B8
-:107F3000F87951429479D06E624DF85E42D347C9C8
-:107F400042CC347DA8C97132CE0FB4E38A403F4998
-:107F5000E77D5035B5EBF70C95E617BE403BD6797B
-:107F6000E924D237306F6B48CE73B9FEB4A13E8B93
-:107F7000F05BB5EF7DBD3FBE637AFB671F3BF05DF5
-:107F8000CB5FD40E07EAAFD3B7FCC98171C0DEBEA8
-:107F900085EF936FD4D9FF5709F90826144D41BADC
-:107FA0002EF0FF3D3FD25E636BB8FF7979507EBF04
-:107FB0008AF7BF23FD80150DFAFB00011EA74CFCBC
-:107FC0003EA79E0FEB041F96EFDA66CE7463FFBEEA
-:107FD00039D8FF69B1BF39DDE8A0F7141A3E8B76B6
-:107FE0008D34A3CDFF97668B78A7D762E27AD93B11
-:107FF00003DFE7F804DDF4781EDC174FF096DEC3EC
-:10800000DFAF2E84BED6805EF435F3384AFA712C89
-:108010007DDB3D0DFDE84B3729B48FC3FAB7C03A7D
-:10802000E15BB391DEF1E8C7B93020FB73F4F11ADC
-:10803000B5FDC032C1FF25F86BBC3951E23836F3CB
-:10804000F774CB74F645E7A19C781CFF9A0461672E
-:10805000E7B34B306EE79E43D909D1E26168E95935
-:1080600071DE8FF7FA313DED67944E4970F3785D1C
-:10807000CD476E46B9AA6CDA4DF111F705DFEB3347
-:108080001EAA14347F6144A12A10F6D87C618FEDBA
-:10809000615C6EC08EDE8CF27FF9E73A3B5A8CF35E
-:1080A000064DEE0F2591DCDC80E31A8EDFD54FA262
-:1080B0008DEBEE04F9FD576FC7A58D471B9F565EEC
-:1080C00021DE9FEBDB69723E45C8DD921DC51BFAC0
-:1080D0000229D6EF7D7F8088234771B63439D2CB11
-:1080E000C932C1B7B03C34DF41E3D2F806F29E2E6C
-:1080F000DE25A5A33FA327B9D0F3BFCDD43A00E72F
-:10810000AB9EFF6D31CE7DB627F0738D256EEF34BB
-:10811000F4AF8079B8C115613F9C566B0FFE14E730
-:10812000D10E2EC791EB22194B2F9A689D5DE570F9
-:10813000A725DA05DFC6E1FB454B00EB69FD9CF2A4
-:10814000D7CC1A48E78DB5B3060EA4771B946AE521
-:10815000A5F77FEC44FBB43D97917FA1CD21E37B54
-:1081600004179B319872FAAF545BBE7E0B75D08EAC
-:10817000168ADF7AEA2BE19FF8CA52186D9C6713C2
-:10818000B81DA8DD3FB951CCA31B9BF97BBB455B58
-:108190008BCDE4075823DFD77849714DCB84A6BE39
-:1081A000869166E4B39E1F4B3D57D03BF06E7C61D9
-:1081B000B7135F97EADFB5897B4C0B847CCC74B92D
-:1081C000859DE6A377C44BEA8C64DF2F7357D3FEFB
-:1081D00066851AFD3DD61897E1BCE3D18F6361A394
-:1081E000427A4F8FFFB21D6B37F465387E3EBEEE8C
-:1081F000E308F5233D23C6C95A2FE7EF32C5BAFD80
-:108200005FB8D1C6A4008000000000001F8B0800EA
-:1082100000000000000BB57C0D7854D5B5E83E7326
-:10822000CEFC24334926FF21413C21111212E29059
-:1082300084000171F24BC4080301826075405184CF
-:1082400090207A5BEFABB79990682DFA7AA358CB60
-:108250006DEDFD062BAD0A4880A08126E9041403CC
-:10826000040D820A96D68014B1053280B5587D8FF0
-:10827000B7D6DAFB64664E92426F5F87D69D7DCE9D
-:108280003EFBACBDFED7DA6B9F65ECD94B720E633B
-:108290000FB7CB8CE53356FBACEC65A98C2D63CACC
-:1082A000E9BE0C46BF6BA9F85F67E59204C6EEC550
-:1082B0003F5568DB57553278AE5CAE9985CFF56F88
-:1082C00090995982EB1EEF53C971D036498E4618EA
-:1082D000C71E379EEEB33066817FD746D33C8C25D0
-:1082E000E0FCFCD723B1A75260FEB38AFFBD08783B
-:1082F000EE2CC0E181799678F873F47EF8FF32C7EE
-:108300008C2F2478DFFDEDF229730E5E5D6D32C097
-:10831000F8A52F496C1D8CBFFF69DD78B12EFD3AA1
-:108320001EDAF0A3B9E91981710F7B9F0BE9C3DA5B
-:108330005456C0D87D023EF6EA7F05EE73F84DAE86
-:1083400008C632ED117167B3A05BC0265D4B63AC0C
-:10835000CE1A99C3A2A03533C2233B64F46E02B88F
-:10836000D644C08201CE355BA3BD1EC4E3EA68C615
-:1083700046C0B8F68D26B70DE6C4DFED8C9DAB6F19
-:108380009E9B9E0EEBAF7F7A6EBAC2D82CBB9DB17E
-:1083900089408FB6E7685CB7E29A6487FE2A4BDFB4
-:1083A0008FEF5683F03899D363995C696286C07CFD
-:1083B000FA7659B3F1CBBEA0751621FC56F86312BC
-:1083C000C02FFF3DF8D5C4685B006EFDBC7FAADFFF
-:1083D0001002F74A85395B6C81F568E326DA0DB443
-:1083E0001EFDF37A7A30E6A5717ABAAC443A04D12C
-:1083F00017E15400AF3D1D56EF5A89F888E0F67436
-:108400008411DC1793D6CD3D93C7D8617C00E0AED4
-:108410001DF132F55F515C6E7B3C5EF48F728DC74F
-:108420006762199B323CDE6046C6607C2ECE0FE34D
-:10843000768539F3988CD75DB1C807D31BFAAA2C7F
-:1084400040AA3AFBA40A05DE33FDB9BEAA30E83FD4
-:10845000629FCCFB9BFA8E5A1C8C35B02915A5F077
-:10846000FC63700FE7BB5E9B6F762D66C05735804F
-:10847000534B0CB4C7C6BC8DF256D35B5921454251
-:10848000CB984FCA057E7046FAAC39D4678530AEBA
-:1084900033CAFD1FB8BE55579B2EC938EE98C2E5AA
-:1084A000A53B8EF0A000EC61F05C53B853B503BE61
-:1084B0009A622C8EC654BAEE098BC1BE535583AE58
-:1084C0006BF4C0E7108E2603734643DB75604C5493
-:1084D0005FF6F078EBAA57AB14A0FFBEFA0C6AF572
-:1084E000F78B4CF674073C5F6460EE16DBE0FBAF85
-:1084F00022BF109DD414A4736DB789E41C7F12F0C1
-:10850000FD2AA1876A81405100CFAA63CC171E893A
-:10851000E3CABF50B06D95D8E910BE6281BE3C3C45
-:10852000DC37DAD6E27C4A309F703C152BA9554ADD
-:10853000D07B4B6D99217D39D19081EB6172B8630D
-:1085400013E0574E31ACDE01EB976F8616F0A1D8E1
-:108550001DF212689B4BA6CB4BA16D34B2852DD872
-:108560001AD8F2603C750879D2DA4B76D76F90EE64
-:1085700017DEEF2DB0929E1A6927F916EB6D941C49
-:108580003ED4439E2EE6D804D79A6417E37CDCC21F
-:10859000908F7F2FE671980D3B55E0D7F7EC0F12C7
-:1085A000FF3AA20C8FA642FFA3E615150AF0AF23EF
-:1085B000C570251578F478F34ADECF325C190DFDCD
-:1085C0004F9A6B787F2A4C99CCD8C9E655159E6C8A
-:1085D0009C97EB31B6C59985EF510C12C9A9B2D75A
-:1085E000E46D843F9B22393F3519812F6370BC4A6B
-:1085F000E39F6A28DE6C05FE578A9DEA6A1BC73531
-:10860000F2C3FFB4D5F0285B0DAB118FD822BECFDB
-:1086100088756B7460ADCEAC39A8175A9C5973231A
-:1086200010AFEECF11AF793DBDD3510FB77EF049FA
-:10863000813B9BD30BE7C9EB612C12D673E1AD9B59
-:1086400036CA52803E97EC45E7515F4BA0A61F8784
-:108650007549AA9DDD0372D7E864AA09D695C85E5C
-:10866000B2A3FD30207D4005B532AE5F3AA35C5F1A
-:10867000E2736CA48FEC4CB5DDF515BE5FD3CFACC7
-:108680003766483DACD757A69CC765067C1093D289
-:10869000767C29EAF3DF9A1DB7A8088F933D0E7008
-:1086A0006C333085C5107B642870DFCAC21DEB5067
-:1086B000DE1D2CC903F2856823E0E01707F6D028F9
-:1086C00064485B073C5FCAA09D8470DD4AEB9291D1
-:1086D0009F2630978C7AAB8079ADD8F677BC95849D
-:1086E000F87A3E8CDDE782D6F22A737A83F4467EEE
-:1086F000B444F89F1563A436DCD83217F934FC1261
-:10870000B3A31FD0FF0B9382F38360DC89D71DFBDB
-:108710000D0CE1FCB5D16B8F82BE3F53515F66817A
-:10872000F9FA059DB5799F37A999D1D0AF8A9108FB
-:108730002FBF2EE2F6D8FF85C9FB722AE2C7B2DA54
-:108740001B2457E3A3F9B8BAB8E2B1D1F07C4B4788
-:1087500038C3F74FEA0C3720FE376FC90D433ED8B8
-:1087600086B881F5C798ED8FE07C315700DE54BAAA
-:10877000EE24BC2AEA8428C06BE14C9BBA0EF0FEC2
-:10878000EBB09699C8F7FEAD06F632BC629BC931D4
-:1087900007FBDB2EAB76D4B3BF4E6D09A7F56C3566
-:1087A000D07AB685FBC7AD01B8D7652815089F629A
-:1087B000650AEA5FC550AC3E02D7A74573FDA8E93C
-:1087C000E39A6895FACF4BF0FE5C1C57447253262F
-:1087D000DB48DEFAFDCC6B86F7C4CFEB95911EE14A
-:1087E00073809590DF159FCC703E17121A5A9BD15B
-:1087F000AB929E75DA9600DDA70B3D3BFD644D25DF
-:108800008BC48EE3D854986F9FCDC8705DB7B13ECE
-:10881000D902FDDBAE32870FF9E7AA427E981DFE32
-:1088200005FB7B65629E5F494C898271455FAA0AA0
-:10883000F257110BF5DBCA36947F81F6ADC4A2BBAB
-:108840008EFE5C24B64AE03ACCB3285AF861A3D82D
-:10885000A86BA4CF60D6046147555C7FF67FE1BA70
-:10886000FA2B4C0E5CFF769BF3E3A9A8077B8D6C7B
-:10887000131B5E8E7E550F1A7D0C08C7D570E68DD2
-:10888000253EB421FDC76D68F684C17AC7A5F3F90A
-:1088900091DF506F8CFD455C2CEAED8868AE4FB4DB
-:1088A00056E32FE4237B14E723FBAD01F9FB5E7451
-:1088B0002A8DD3E409F90BE7D963F42E760D6117FD
-:1088C000812FBF877CB9DDC62A90CF9F1961598857
-:1088D000F2A4BD67B7E07B7DFB54C39A2E23AEFBA9
-:1088E0002FA0FF01EED2E4ABA660FBDD15C7E12DA2
-:1088F00093BF25BFFA62BB44FE7C423BD7D7C17C05
-:10890000316268BE7801F17A3DBED0C7011A5FECD2
-:10891000B81E5F74FF637CF18B68E1DF0ECB17DF5D
-:1089200046E2FA1FEB2849647FC78F69137C30DC6D
-:10893000FD2956AED7F4D7DB053E779B9AEFCC41A5
-:10894000B9BFCBE040B906AAA7CC05FBB23B9C3F20
-:10895000C794D569D8DFAE703DB2BDDD4C7A64BB3B
-:10896000CDED267B9D6461E82730C5DDF77DD47FA2
-:10897000C916755D10DF3E2EF4408BD137E573F4D8
-:108980007F0F70FA4EBE2B5736C1B8110F70B9CE9B
-:108990003F67DA28C33CD53145BE6818DF17CDEDF7
-:1089A00062DD1918057C597BC644FAEDADCE23E58E
-:1089B0004E1BF9374EE4AF497B8E941767E378CEB0
-:1089C00047DDA2D5FA53704D3164768E25017E5D68
-:1089D000C24E4C615C0FB9903F72027DE634523C4E
-:1089E000A6F1413563596827E6F639CA908DAA2A5F
-:1089F00042E95BED9B4971DFFCE3CEB20858D77CBE
-:108A000097EEBEA07FB58EFEE007FF01E564D5E6D8
-:108A1000DE4E1BF2ADCAED698B697516F77B56A762
-:108A2000A1FFAFC911FD004F2DBFCF78795D901D1B
-:108A30005763F83A9F752874DFD367F2DE0297FE1A
-:108A400037E3CFB5087BF3AD90E3DCC7DE588CFC91
-:108A50009BB7DCB90FF1BF284EA6EBFFC97C96345B
-:108A6000A48F4321FFABC5A8967C2E05C631C595C2
-:108A70006183FB7BE2C3F3F0FDD531EE6B4827A6A3
-:108A8000F8BBF1B94985B9792857B6094DB1687F66
-:108A900034B801AE8A4DB6001C1A5CE785FEA98E7B
-:108AA00059720DF180CFA15E693B75D682CF6B7490
-:108AB0006FE9B8C4E91D447FA47780FED27DD8D782
-:108AC000F06011ADD6FFE7E9EF1B89F41896FE18A8
-:108AD000F747FE8FE83F2A6608FA833F958ED73521
-:108AE0007FAAC5047E7576A0AFD1BDDA5E44E31CD3
-:108AF000265819FA4F9D1057A21CBAA3D1B9613B51
-:108B0000EDFC5DFDBF3F3B0A5C4036292686CB93DA
-:108B1000C93F06FD8D093E89FCBE0920F0F7909FF4
-:108B20003592F49D43E0879D95A4B319DC05BF966B
-:108B300082FE9F2F16E56082B9D287FCBEC33A3D04
-:108B400005FDB75CEBB434E4A737331E3B8426E75E
-:108B5000CDE4E53B5F51037E8EA6D7F68969B5F774
-:108B600097C770FADF0E6A16FD3D740D83E1D0F4ED
-:108B7000379205E1907CD5866B56D2C7ED7D80AFEC
-:108B8000DB110EC06B97C45A517F17199C7125E8F1
-:108B90008FC5FB14EED77D3D4A05BEA96C7FF73823
-:108BA000C25B69B1F930DFC21CC6F37D41F912BD69
-:108BB0009FABF9259ADFAFF92D5A7C89FE0DDECFE8
-:108BC000C7EB00BFDD0C00A2FDF159BC0DF0FEE7C4
-:108BD0002FAB994E21AF0AACA352AC6336EB25B84C
-:108BE000D8B7D7AE4D03FACC12F8A8EC86B8300748
-:108BF000EF337617E0E12E85C78B7739203E0CE204
-:108C0000A3D99343FBF89B9E1098E77AE3F5FA7F8C
-:108C1000AAC817FCB371A6D676831D3A0D0C70B0A6
-:108C20009EC73485A3658F82F1803BD380FC582793
-:108C3000EC1A84C943DB2321AF8586BE1C07E0B74D
-:108C40006BCF3764FFF6EEF9E623F4E7A67CA1309C
-:108C5000333C5FF8457E14EA07E60A9DB7EE8FAD18
-:108C600056C6AF13FFD48AB5EFAFC78C18C267A141
-:108C7000F637E79F5F8FF37D7946E1BC2DDE5F6EAF
-:108C800072A7DB6DD8F2787FBFC4FD1DEDFE7E2399
-:108C9000C00DD737C568717FAF42F919F89983E8DD
-:108CA0007C17C6FBB901BADE75AEE20B2567307DD5
-:108CB000F0F7FF23DED7E2FCB744FCC0F69D30A9F5
-:108CC00000D78CD64714F4A36724C9CC19F4DE3B33
-:108CD000542B7306C5FB6FC4E8FC907DAFAD9F05B8
-:108CE00076A4AE477684A1BCB66F3F9483FD5ED96F
-:108CF000611D828FF4F89DD1FE8882FC9F10CBE528
-:108D0000E67AEF2F1C077C722BD29D911F77B14022
-:108D10002239D2D377EF9E9FC7F6650F8FEFE1E838
-:108D2000AFA7C36FCE1747215EAE470F3DDF76C2B8
-:108D30003A3DB03E1FACD303FED6DE7A3BF5DFAE44
-:108D40004FA2BEC6AF751DBF8C457F4DE3D3B25851
-:108D5000CE375376AF8F65B600BD347C5D1474ABEF
-:108D6000668EF9B3E0CF5D922382F48487F52615F1
-:108D700004EC55F5B172F233347B552D671B51FF6E
-:108D80006AF60AD3C2A8CFF4F6697E7A9111D5AA01
-:108D9000DE2EC1028DC8BFD50B43AF57F4342B1163
-:108DA000D433109D2449E043F8D51A3C1F3217C133
-:108DB000ABA7A7069F1E2ECD9FAE1674837596E1B6
-:108DC000D2E7AA45B48E417655ACF746EDA93936BF
-:108DD00034CEBA72AEF4FD9C21F87538BED5DFD71B
-:108DE000F44039BE20975A0FFA1109B10944AFF285
-:108DF000AB26E6047BC14686B1CF82F3EFAF649227
-:108E0000BD7B54D8DFE1F8A6F6AA81B96303FC6301
-:108E10006C7BCE8AFCB35B69B662DEF136DB9CC646
-:108E200028C053E91F8BE7A15F57D76760989A2A3C
-:108E30006BBFB40FE3F6BAE3CC81FAB0B8BDAB04B4
-:108E4000F9ED6DA557A638FA4BC69E0BF20FDBDA8B
-:108E50001BADE83FB5C5C914A7EF8FE6FCA8DD6FD1
-:108E600089E5FCD776E6F22CE710F73F13F74B4F76
-:108E7000E51AD148F6C74750BEA1FC6903ADBF54FF
-:108E8000B25755A2FF718791FC7A885BFEF07DCCCA
-:108E900037B599B763AABEACED878FD881102DFF87
-:108EA000E7B30633E60FE6488E97615CB9EAEFC296
-:108EB0007EF9BC54DA8799F47F65F25FFD774B94B5
-:108EC000F7280776C17EF93DA95ECC3FEC9178DFAB
-:108ED000D3C1F3FECCEE899D05EFF9A03276C23AFC
-:108EE000E229AD7F4BEE3A261838289E7A6C17DFC0
-:108EF0003F7AAC4CA2FDA3327B0AF304F155F9D3BF
-:108F000040CF3CE0C7F6C462E4DFAA0A997983F84F
-:108F10007ABECBCABC41E3F7877178FC92D98BF952
-:108F2000124D5E670AFEAE5E181B327E0EE37EE2D5
-:108F300042D66C44F9AE13F0D415013CF0FC4C1150
-:108F4000A7DEED4E09796F256641606856DC68B290
-:108F50008FB3BFEC23B33A473E796C31BC87657061
-:108F6000F9D0E4AC4CAE69223E48921C181FCF9752
-:108F7000C0AB9451DF85CAD1ECC9A1FD394EBD7E8D
-:108F8000089577BD1ED7E47C7E876CC4387A7E91C5
-:108F9000E46043E803BD3FADD703930C8E7730AE5A
-:108FA0009E7BD549FC35480F9CACF887F4C05B200C
-:108FB0005B93415E7FA4E9839BD84DA80FCAE42D43
-:108FC000EB913FFAC1AE9987E00FCD2E68F176396B
-:108FD000C827F2033BCFF725CAAE829CC606E2ED56
-:108FE00001FD007E8363087FE657B16921FB4903D9
-:108FF000FA22C86F3016FCF37E4319F88BA65C8406
-:109000006F24F3E4919EA2FC1EB43ECAB3255DA278
-:109010003C4A1DC4F114CFB35F125CA8D7A49800DA
-:10902000DFEBFD092D4F3B42E409F4FC3090B79B88
-:1090300067F4229F69FC506EE772513E4FA6FCB95F
-:109040009E3FB4F75D8F2F7C12F085F477F842C80D
-:10905000D38DF2C5218D1FD259FA8DF083C6071A20
-:109060005FE8EDC5415DDE65387B71F23AF6E29D61
-:109070000C23E965BD9DD0ECC28138AE7FC7C7F235
-:109080007D8A9999F36DE8578C407D80FE9EB037BC
-:109090000379A30D9C0FDEE95BAA486837500FA443
-:1090A00006E15DE44D35BEAB7D9A51FEB052E89FBE
-:1090B0008B1D3C9F56572A7B2DF06749FB73EB793C
-:1090C000DF48F9B622A54BB1C0BCB31D9203F335FE
-:1090D0004E917F9B75D5E455293F3FF47E7A95E00C
-:1090E0001B8C7370FC6CA7E4851074901EAABACA1E
-:1090F000EDBE5E1F5589FDF22ADD7EB9294ED0F501
-:109100006676F3BFD2EEC7C72570B919868EDAF33B
-:109110001A1D35FA4DC0B1283FFBBE36A911DC3F00
-:1091200046FACDB8AAD03CA3E242FD962FCFE7FE87
-:1091300027C574627C5DFB25937BFCF0F05FCF2F2D
-:10914000BD59F3C3855FAEBD7726C8780A3A863A23
-:10915000FBA1BDE7BAF6423CAFA7D3E4B8D0784252
-:10916000A387A64707E15BE8D9E1E8753D3DABE998
-:10917000B37FB59ED5E6D7EC80F65EBDFE1D2E3ED4
-:10918000D3F4E9531B0D9417B94DC4C1B7893CEB17
-:109190008342CE970B7DDBFF178B01FDAC6D9DDC11
-:1091A0001F7198ED87D06F08E4F3385D9F8C601EC7
-:1091B000DC2F674AAF85F62F8B81A4B87F99CCF757
-:1091C0002FB7283E17E96987C21A405EFE2AF216B9
-:1091D0004FEEF52C463DFDE4E93106DA47577CBDFC
-:1091E00018174FCA55683F28DAAC52BEF76287D9C4
-:1091F0008ECFF5EFFE5E9711E7F90B7360A8F67658
-:109200008779603F06F54299DC23635EBEDF0FBEBF
-:10921000388C9FB6D05782F1CE6DACB711E3EA42DD
-:10922000A4E310F47B55675FF479FB920EEE27956B
-:1092300044F0BA9FE980467CEFF43613F985D7CB2A
-:10924000DB177DC9C85F1A94AF6FE37A0606119FDA
-:10925000DC68DEBE107D3DE0E39FE8F40E1B267F58
-:10926000BFCDC4F773FC478C0CFD5E762E6EC8BC78
-:10927000CBF5F2F8BB3BC39D6A24EEBB71FF7C7754
-:1092800067B253CD197E7C4E9FBF18F395DBB6CCE9
-:1092900055284E14F9CF41FB223AFCED9058931516
-:1092A000F369ED8E528C3F86DBE728F63B69DE1BC7
-:1092B000C51B63CD9CCEA27EE9762163DBCE863BC7
-:1092C00091BFB79D4D76223CBB057F6AFCBEFBCCAF
-:1092D000E570DACF343955DC07F6475B1C2F13BF36
-:1092E000723E6F1931C68BFBADDB853C6C0BF71FF3
-:1092F000CC8A0BDECFE0FB179DF59EAA33E9B4DFE5
-:109300002D61BE51DB27F680BC505D4E0C237E32B2
-:10931000B21686EF6D74B29F633B7D9A1A85F8BED4
-:109320001CA7ED47AA519467F8F64A816BFC60BC14
-:10933000EFA877513D496BFDC22A05607CB3DE4D35
-:109340006D5BFD726AF7D4AFA6FB6B0F453E8E7660
-:10935000BFCEB9A04A09D21B9FC5F3FC526ED6E915
-:1093600012E473F60D6318EF4C7FA24F463D71FB7C
-:1093700055584748DD887219F14CF9CBB4403F5538
-:109380005A12867C79FB55E8078D97E2A3391D9A1E
-:1093900094A65B0A485A881FC2E29D17E3E0FA0FC1
-:1093A000ED2E7F5C3CF241F5BE0B8CFA97F1FA0E84
-:1093B000E96EF9028CCBF31551DE380FF3C6B934E0
-:1093C000ED62C4DFC42E13ED7B6BF9DB5C31AFF3D0
-:1093D000ABD03C729EC8DBBEC9FA289F9C6F81C08F
-:1093E000CA807071FA39A5F94912E6FBE24D0EAC5C
-:1093F000579898E6CAC37C6B573CA3FC695757C281
-:109400004815F0E054785ED7A9E575D9DFCFEB7643
-:109410007F1AE9217D057E0AEAA7EEA3910E1FEDD2
-:10942000FF59C8FFDB810F627D4338AF1760F3E659
-:10943000511EFD760B5F07D89FF878CAFBF9F61D21
-:1094400086E77E7B99F17DC4DE93B43F5D62C84CB4
-:10945000EC0338F74963A3B07DF1D3C86C6A8F463B
-:109460009E47FC741AAC2ABEF7C37A56857567CE40
-:10947000F76DB49F31FD7D9B82EDE1FA3EAA477BFB
-:10948000BFFE1CB547EAFDD41EADBF4AED3B701DC3
-:10949000F9E7103C8F6DEEE2087A6EC7A20813C29E
-:1094A000DB19C9B668EFC17A335FB8AF1593F9EF2E
-:1094B000C57FBECE7213D83BB37BBC3481B113F1F0
-:1094C0009FCF54A07F68C6A87FFF0BDCFFDD4F2E27
-:1094D000ACB3005CF38EDA5A7BA0FFE94F2EAEB33B
-:1094E000A19E3D140ECA0EF546FF41907496873634
-:1094F0003D9971053B19FAB1A2EFE99F590A245F22
-:1095000050D297C580B5A6FCC43FD302785C607585
-:10951000FF1BF64D9E976696DE847DE6C17A2EBFD0
-:1095200064A4F89E8D94E2B07E6599DD7D2C3EC8E2
-:109530007E3BA53FD2FE51815362D1714457DACFB1
-:1095400062F653B1C1F2B6CC5E760CE971473CDFEE
-:10955000BF9A384D7206D749E8C74D3CA396229D65
-:109560000ACE9537613BBB229AFAAE85939A509EFC
-:109570004B6DC33D5F42CF2F8837127F162B524869
-:109580007D887E5C1E3013FAC7FE03E1941798783D
-:10959000CCDD8875A36549A9B9B2D0798CFAD11B05
-:1095A000711F6D62E587A5B1283F36C981E6A180AC
-:1095B000F535C5C661FD231644E1BA9E2BC1FA9D5F
-:1095C00089AAE440B41539BB5AF1F9224784A308AB
-:1095D000FDF1636A299A9CA3CA84C3F9306E46BA26
-:1095E000ECB0C044477D774CBD00FDA28C28CAE397
-:1095F0001629ABAF1CA67E84A341C5756CFC792DE2
-:10960000CD63267BBE6356C97F20FF14BBA228E72B
-:10961000576A3B3537B82E0CD64D7017D9656F9801
-:1096200084FCFD83523BF4778C9218CACF515FE6DD
-:109630009FE97E77B81A0680EE30D94B71BE1D26A1
-:10964000C9BE96FAAE121CEF196354314F541EF77F
-:1096500045C8FC334AA5296710FEECA80978AD621D
-:10966000E4A590FB3D8BAC64272ADFCF267FA8675B
-:10967000510AD98BCAF7A71563DB63E07E7AE5FB55
-:10968000951574DFC0E3DFCAC5DF718A3EC5BB959F
-:109690008B5751BF4B4AFC777CDF95ECA85CCCA381
-:1096A000CD4CFF7AAE12ECFFADCE24F9CF1579BCCC
-:1096B0002243E6FA6900FFA307F83E4465B6145258
-:1096C00037372BFF54483DA86BDA1721FDB9A59712
-:1096D00042EA43E7557E1DD25F304FAA0A1E5F7AE9
-:1096E000209FEC6BBEA85FD2F24B458285DEA9CFEE
-:1096F000A82A05B93C00ED03A01F8A7A45DE55E192
-:10970000717506FC433D586AD3E577994AFBD91534
-:10971000DD7CDFBA3CCE783AD83E54C84F707F41EA
-:10972000B7FEDC0346B293B9D132E5AB34F82A4632
-:10973000863EAFF95F1502CE1D0677530CE5C79C38
-:10974000BDE87F68F06BEFD7E0AE90EF29A5EDBFE5
-:10975000EBC0AF87170025FF4D0FC78178118780B9
-:10976000BF41FE5937AF4B835FDC50765BF3CF2BA5
-:10977000414F4507EB299B1487F576C3E9296DDE38
-:10978000E1FC306DDE6576173DEFDCFAD9D1423968
-:10979000A89F7A2A3626B8FFDA67EB43EEC79FAA5E
-:1097A0008A0EEE6FFAAC0AEF4F57D4461BF0E34136
-:1097B00026393CC89F3DAA82FBCF25C79C4DD89631
-:1097C0009D746399299B71C6D384EDD4F3DE1E3357
-:1097D000ACEB8E0C59C5B85DF33FF4F09A13781CCE
-:1097E00072F0AA6AC5FDD31D1ED58AFEFB8E2754D2
-:1097F0002BFA1F3B9CAC02E331679A6135FAF3CE3A
-:109800002C5E677855E8E16FE2F9F35A7B5A717F75
-:10981000837A11EBC2D127A8FDDA4F75E007D1AFEB
-:10982000CA1EEC571D54BC367CDFC127BCB6E07D98
-:10983000C21BF5ABFE8C363A1EF96C4E887C9658EE
-:10984000EEAE0A96EF32FB9290FB9FC6A904FF8C06
-:10985000A48743C6DDA13E12D2077F3103FD9146A6
-:1098600013A33A598F81D7C9EAF1F8A8C0A3C366F8
-:1098700047378619E354AA6BD38F739470FCE9AF12
-:10988000A727F0B86823C80CB6F72470F8F475B1B0
-:10989000FA3EC47C0B713E983909F9DC61355C01F4
-:1098A0005797391392EEA47AD93CC3A369D0AF4E2F
-:1098B000C8E2FDA9869D581F7B774236EFDF6AC854
-:1098C00033821FF02B36FE4EAC07AF0D13759D0F84
-:1098D00024D27E9816DF2886532F2EC638738F9198
-:1098E00061FEFE1913D8BDDCC0BEB9D5CCE352ABC6
-:1098F00089D76D3F957AF429D41B6A987B7A02F94F
-:1099000051C52AE2EFBCDD42759D8FED2E4B44FA26
-:10991000DF93C0F35C593BA726A17EF917BC7F56A5
-:10992000C2C4E1DF8F75BE38CFF91D59E47F67DD12
-:109930000CE89502F887F098AE87419840E72598A3
-:109940003309F36C8DD1269AE79E04CE7F37DA0E69
-:10995000AAFB8D32ACDE0EEDFD82FE0FE07B095FCF
-:10996000FE51737063CEEE1F35773CEF237D653972
-:10997000D78F7EACFF3B11B4AFC246FA69FFE5E377
-:109980007BB21CE89F7E12CEF1B7D03BBAB14FC577
-:10999000FA0DEF4D582F9191E8AE453C2C327B6F7C
-:1099A00021FEB1AD8EC0F96FB41E78F07B2180042A
-:1099B000FA544FE1F4D1DE0B38B5A03DF8589C03C2
-:1099C000D1E080F7FF00F9408367000E5D5DB89637
-:1099D00067AEFBA381F20C7512E83DE8EF3CC91CB1
-:1099E0001E98E7A2E6AF8BBC266E45E17BA61C5E07
-:1099F0005A628336BF6D258F737B95903CD7A4E365
-:109A00008A7EBF83ECD654ED795D9E71AA886BA7E0
-:109A1000EAE2DA1713849D4966C9C1798035226E5E
-:109A2000B8DC333A0AFD4CD45132E0D5A4CA6C728A
-:109A30004C40CE5B21EE674171BFC667E38FD9EF23
-:109A400047B8C71F63F7915DD7E61DC82F70BC5C90
-:109A50003ECEF132A12FE3A7D3A06FEC3632AF1A7E
-:109A6000584F2107955DC6FFE078BBC98B75CB05C4
-:109A7000077E99E7834BE624035383F010A68633D1
-:109A800035482F5A336242FAB2866F61CFF3C4FC75
-:109A9000118EE49079F6C49477A37DCFB32D27FB84
-:109AA0001E357974C83CAC4709B1F3B028DABF9CC5
-:109AB0000840FD0CF05A704C09B1E793E23CB862E3
-:109AC00036F9A4A2B3FFCD32CA41E199D0EB0786A3
-:109AD000A3CB70F863393F45FFEE1FC55FB4331465
-:109AE0007FB115A1F88B7785E22F7161289E46B86A
-:109AF00043F192B27C5CC8FD9B56E786F46F7EBC56
-:109B000030647C2A18A4E07EDAD33343C6DFD23C2B
-:109B100037A43F76C3A290F199DEA521F7B35E5D2D
-:109B20007143F41EDFB226649C9EDEB7B6FDAF9093
-:109B300079357A7BE0DFBF82DEE6C4507AA70AFD82
-:109B40001AEDE4F565FD46DBD312E8234C13A15E64
-:109B50008B6E7FF76BCC43788A55AA9FF3CC64B4A5
-:109B60000FFD82EC92500FA5C0148634AA5FA7FAAD
-:109B7000BB1F1B0C21FBE28989DCBE2726F27CCDB2
-:109B8000CF4DFCDC520AF88F64870C2C102F031E7B
-:109B900022315EA678FAC7CF60BCDC14DD97A14203
-:109BA0007C6CC6FE4D017DB9C8AC36F6013E26C8B8
-:109BB0005C1F829E4C4B84F93F919E30723FC26382
-:109BC000443F22C5C23C91B9643F287F1CCDE224AA
-:109BD000ACC78F0AE869F51A106BDF8A2C3A07F5D3
-:109BE0001E4282FEAF2586ECE8DD9A7E5A9E49FA37
-:109BF000E9B22DD40FBBFC401A5D3F71AF99F6FB63
-:109C00004F883A446DFDE784DEFA53BD85DAF3F5FB
-:109C1000F6103DB67CE3FA08F41F4F64707F51BB29
-:109C20005E82789B88AD2CEC9AC58EF9AC7BC038EF
-:109C30004701BE5775F7452E62E43716E3BA6B3716
-:109C40005EB9F74DE8D719FC09DC3E7878BDCCC782
-:109C50008CFCCFEA6F5888FF343791C7E973C5FC95
-:109C60000BA0B1039E1600FEA3B17D775A39F227EF
-:109C70005CA7F369B3BB19D59FCC71A7D23EE35162
-:109C8000E6F8701780F89D4495E09CC75CB45FFFD0
-:109C9000D1BDAB2270DCC07CDA3CC028E86F7C1CF4
-:109CA000ED312660DC7F1BAF6F80F759F0BAEB9E79
-:109CB0009427D10E69EFFB88B92F7C88FBDDCC415E
-:109CC000F36AF3331613A29F762C5FF9692CBC6FED
-:109CD000CD0103E513D6749829EEEA5FF1D7AD2FD5
-:109CE000C2FDFB52FA6E42BBFCC98A6FC6203FDC44
-:109CF000BD01F410ACB130CAFD7062509C72E281BB
-:109D00002B11781FECEBA617D1386E36537DEF2759
-:109D10002B368F09F6471F4D2CAAC5E7D8E41B3B0D
-:109D20006F58F27A6622D563097E7A58F0D39AD7B3
-:109D3000C6921FB52662809F787F13AFEFD0D6F111
-:109D4000A1E0C715AF7F5D107CCE7407F0913A8615
-:109D5000EF6BA920533B7B2EE7E0FD57147713C22E
-:109D6000D779F57424F677BEF737829FCDBB31786B
-:109D700051063D0581FD65EDDCE5C2F6D83CA43B0E
-:109D8000C85933CEBFE837AF5DF81DE2A763F3A62D
-:109D9000EFE3981B3C7FC9847D71083C807DA1F86E
-:109DA000A09F85F3731D428F2AB8839E86E7991C76
-:109DB0002AF1B3931DC27D97C62E03C3BA9548DC22
-:109DC000B409CAB345CA06CD08392D49A09F855E9E
-:109DD0007925F1E49D4DE4E787FA3DF96FAF08F18D
-:109DE000775CF08FFC9D97DC8D9807BAAEDFE3338C
-:109DF0002C3145DDB8FF0381B0532A105B38F06B7E
-:109E00004B14FB22420F77A21C61FD3FCE85F97AED
-:109E10005F383F670CA602F5F80F604DF8B0294592
-:109E2000B4D2C50C0BE8C5BD897F78E669D093969E
-:109E300074BE5EEC37E2DFDD9CDF06FCABB7C7919A
-:109E40009E62DFC2DB100F225FA1A7533EC8078BC3
-:109E50000D9233F1BC6FFFDF22314FBB35467D1FC2
-:109E6000E9E03F20D33E4D98D2678A1E222E7B1315
-:109E7000F59E89FB4D546FDEC6F38116D5C9300EB1
-:109E800008B3DB27049FB36B17FA6ED5FE4F4699D4
-:109E9000800E170C3D91D9307FCDAE1D91E8C6DF05
-:109EA0006B747F8A7CB7F2C40705763ACFB671141B
-:109EB0009D03F08DA6BA83F10AF328B983E1A8DBEC
-:109EC000904BC6B8760325E3D9F8F6BC87501FD56A
-:109ED000F9F83A716E2CFCCB6C63D4BFD8D61883DA
-:109EE000F3D5FDB62319E567733C8F135FBF3A8E38
-:109EF0003FAF3005C77F99182DF8D96BC03863B3D1
-:109F0000884F2E5E35D038EDFDE3DB8A643BF043AD
-:109F1000B6AF792FC543ED6615E91AF60AE37868FE
-:109F20000F2339AFEB9CC1309FDF1FCD1C12DCDF4C
-:109F30001AEEFF039D33EB30AB981F0DB337B31808
-:109F4000987FABD80FCD048EC2F34ADA75ED7D61F0
-:109F5000ED3FC55802F981F2B4614A33BBCD168C8E
-:109F6000E708C2733CF2533CBEC767C0FC88FF16CB
-:109F7000C65E26B80270327AAF066726F9735B4D6B
-:109F8000FEB3787E05E0B223FD33198793B58F5574
-:109F900031BE0FB33B691D6176D5E19106C355977C
-:109FA000C3BC68BF7FBC960DC82BCA6F5D78A06F1D
-:109FB0000119D83A9A09F9B63F5B3A2DB80F8A646D
-:109FC00072E0F9711B629E6D1A49718347C638169B
-:109FD000DA88185CA7CACF3B636A2897E301F7C504
-:109FE000AD167E7F603CF0B70DFB363ECE1165B7F7
-:109FF000CE94484E28AF572BE4FD31C977F67690C2
-:10A00000D3BFF8F6E6A8004BCDBB7B884F571ADAD2
-:10A010005F1C0FF7375ADCF94980CFB74E1AE81C9E
-:10A02000E99F5E0BF35662FCB87B63827308F9D03C
-:10A03000CFFFC3E36B9F4F41FAEF9654CC9BF61BC7
-:10A04000FDA310DEDAF6CF4D548FD0768AEA938ED8
-:10A0500024B99DF89EC96D0DB46F3C8535D3BE7192
-:10A0600096387FDD92C4F5C7E563635E6E08C2FF74
-:10A070008349DC0F637EF7CD2837ED423E3BD12F7D
-:10A08000817697F08F7675DD9DA606E5FD1AD8DE00
-:10A0900014C4F75AF636B5DAF57E2F3FCF98F5910E
-:10A0A000E53E6710FFB993B89FE716EFF327B9179E
-:10A0B00024A1DC769D3645AA785EA56514DA911652
-:10A0C000F09FEC43E065406E757254A7F84D38BEC2
-:10A0D000EE1C3F770A746EC2FAFFCD1FB58D5B028E
-:10A0E000D77701AEB1DED373C24C758FBB8CAE1483
-:10A0F0001CDFF0E15739A8B72A1069F0BFAF3A5614
-:10A10000DE8C7803BE2F0E47F9DACE488F69F299BC
-:10A110008DF209CF6723DFE7633F93F4F056532FA7
-:10A120003FF7B98B9FFB04BE273900BEB7A39F90B2
-:10A130006D0739A0E7C7927C6FED35D0F9540FE871
-:10A14000F15BA85F5C85FDADBDA576926FCCC3E7E2
-:10A15000A29CFAF6D23C2D108320E924E60AF61FD1
-:10A16000DB1323898F35FD783091EBFF960C350A90
-:10A17000EBFFADB21C2217417690F7859DECDD50C8
-:10A18000FCEC0BD3D0DE09BB20FC27769CEBF94717
-:10A1900085AD5AF34EE1EC2DB0CE3587E5817A6E70
-:10A1A000F4577D824FF60AFF15ED849AC7EB67F0EE
-:10A1B000FAC40DBCCEB5C0B9BA04CB38265734EFBB
-:10A1C000C3B6D0D55282678EA72DECDDC7CF1EF364
-:10A1D000F3E3AD7BEFC8C27DEAFE136686FB24ADD8
-:10A1E0007FF3FFE175C0C3773B01FF43D825580ECD
-:10A1F000F11F58EA149634F87EBFA4E98FF9952828
-:10A200006F175BE5401FEC612D3038F67F9D54F5EC
-:10A21000AC07004B1BE17C1D59A230D94D6DFF915D
-:10A22000BF25A02DD8758CFB4DAD266716F24FEBE0
-:10A23000E8D0F3FA5AFB62123FE79C6F6643E625CB
-:10A240000F09BB37C6C39E413EAA6D95ED5EA0FBCC
-:10A250008556D96902FFE6ACD39D806765CE31CFC4
-:10A2600082A968E745DCA87D4F6519FA2760A71E1B
-:10A270007C61501EDF807CF450BBC47E066B5EFEAA
-:10A28000D2D0FB0A35629E87DB36EE4F013AAE78BC
-:10A2900025745C8DA813ABD1F92F8792447C98C6A6
-:10A2A000D2D02F01FE21BD605458B719F8F5C16412
-:10A2B0007707C61B9BC5770C407F921C7608BEDCD7
-:10A2C0002AEA04FC5B25DAD7CB7CD52B1BE0F942CC
-:10A2D000C52BA39D62D0E23EC164A7BB1CF10BEB72
-:10A2E0003E86FB35CB851E5CAEF9655EBE9F01E602
-:10A2F00096FCB229CCDB1889EB7E5572F854FC8EA3
-:10A30000C8A03A5C5A779D5877CD8623FB318C5B89
-:10A31000D5123AAE4EACBB4EB76E6D5FFBCF49BAAD
-:10A3200073C837B86FF16723F7133E10F368F7CDA2
-:10A3300023B83EAC05F0906E355ED9EBE57E9D0D01
-:10A34000BFC373BF80F77E41EF3AE633A5C0B8556F
-:10A350002FF075B26743EB3F1F6C7DC484F1959E6F
-:10A360002F966F31923F0A8833A1BFA8E78B156201
-:10A37000DD2B74EBAE754B3AB8B89F3C18AE960522
-:10A3800048D7555B8C0CEB11F5702D6B59528E7CB8
-:10A3900036985F395D5688F90270AEA6737C370A2D
-:10A3A000E7A811822FC7B17144978AD81BA28BDE10
-:10A3B0008FDDBE7F9C15E5FB72F7688ADF35BAEB4F
-:10A3C0009F2F177EF08C0D8CDA0B6D25D6F118A718
-:10A3D000F4181C924AF156E478C0475E87CC2AA153
-:10A3E000DFDF9EB6DE0378CF3D9C5F85F17CDE61CA
-:10A3F000039D77DBD99D4FFBC07907D263D3281F1C
-:10A40000EDA0EFCDC03C643FFB7B72D7E3B980FE8B
-:10A410009ED27C9C57827168E773851D68E8C9B538
-:10A42000069FEF2E18C1E3F5A7923EFB31FAE13308
-:10A43000B61BE97CC30CA3FF3DAC9FDAD9ADD0BEFF
-:10A4400075CDE1A56BC390AEAF49B46FBDBF774D7D
-:10A45000DC62E4AB76A31DF7A1FBDBFF6D2FDEF71B
-:10A460006C91E87B12751D65595BA19FBB31CF11C3
-:10A470007CDE2B375A25F8D8082BC5C3336E3292B1
-:10A480005D3C9F6CFD25FA372B9C1B498ECFEFD985
-:10A4900069A2FAB9AD1243D3BF3F69DF1B888FF3BE
-:10A4A0006F1E31A1935DD27AC4D4F777ECFD052FEE
-:10A4B00004FE1407379B304E59B551EBF799904E77
-:10A4C0002EE1FFD4BE728AFA2BDA24D2332B5E92AD
-:10A4D000E93CFBBE8EB74CC8C7B55B2496981A748E
-:10A4E0007F8314F21D84A58CF3C152A1675632EF0D
-:10A4F00053C9306E6533AF23604F87D6E5AEDC328B
-:10A5000087BEDBB4AC79687DF3B0E0EB87301EBC6E
-:10A5100015BF83143AEE61EDBB5C3A7E7E5CE3E7E7
-:10A520004C9689FCFC55911A950DD7BF3AB2E2E6DC
-:10A53000A1CEB1F7083BACD9C1CB3E03D911FDB8D0
-:10A540008B6D5708DEBA9ECB26B483E5ED9708EFF6
-:10A5500095ED5D54C7711773D7209EEE6AB7DA5137
-:10A560008E2BFBB85E9AD96EF67A25BCDFD284F4C6
-:10A57000ECEFE4758B9E3D12F92F9ABE7A48E0EF1E
-:10A580002181BF874041A7E4A21FCBE3DE8733369A
-:10A59000EE8F81FBB5E27ACD817D91E8EFCD6497B6
-:10A5A000EE457AC07B18BE87BD148AE73B1987E366
-:10A5B000CE2DBCDE596FAFFA4764CDA6FC23C49DF7
-:10A5C000084FCD96503CD7EAE2ED7523B87DDEA466
-:10A5D000C373A59F59B3110E5576786974AF82EF96
-:10A5E000EDCE9128BFDAADA6450DB5FFA8B5EF09B0
-:10A5F000BF59EBCF16E7AB5BECCDB6E038D894CCC7
-:10A60000EDFF8A29B207E934103FA4EFCB510D8149
-:10A61000F801E286DF8C88E771041674BC3B526651
-:10A62000717181F8E18749EB2B73A15FB785CBF995
-:10A63000C5C9301F7EDF4B61E45FD66D31D339C0B1
-:10A640003AA03BC509EDFC1C83AB5D2A437A83FF2E
-:10A65000FDEE888978AE8619E360DD73DA389FCF26
-:10A6600029BD447C72209DAFF7B2A2260EE58F6B08
-:10A670007E389EC35283CF3F805CE2F8DA765E0F6D
-:10A68000D4BAF7EB51A9A8D73AFE3A6A09B45746AB
-:10A69000F0F56B7E9E1FFCBCD1DCCF3986FEE783D4
-:10A6A0009ADCD8F93EDA83C2CE30A989F8BBD6D875
-:10A6B000F2760CFA4D5BF9BE3DDB6DC46F9CB18642
-:10A6C0000F5E6F8A81755F7C5DA27A347CFE09E043
-:10A6D000B38B4B5B4EA31FFDD5560BF98F0F828FAB
-:10A6E000383D77B03C6A72AB7D77AA81AD257F7229
-:10A6F0002D6BA27695E0E38B6D8D26CA9B79839EA8
-:10A700001F3DD8EF58A5E33B537228BF357C104E50
-:10A71000FE5FFF01D98EFB2780A7FF4E0EC687F094
-:10A720002F5AF786113DFB8FD8C85EFC49F0D979C6
-:10A7300091376E982CD3FA0D53789BD5F9D668A42F
-:10A740001FE21BEBDE3777BE358E9FA7F612DE5772
-:10A75000BE8A49F120385BAC94DBD3FA0D1F2CA2E2
-:10A76000EFF0D4ED19806B8C292E00D770FC2F49A7
-:10A770003C1E3448A1F160DD6ED9155CEF05EBB9E4
-:10A780000FF54F929003A6F813D02F1999AC92FDB4
-:10A790006A68E7F43474F016DEBF80E73B8CF4FEA1
-:10A7A00041F78B3D3578FFAB542BDF4FBEEAA9C490
-:10A7B000FE7747CB544FF9DD0F568C0DD69B0CE13D
-:10A7C000047AD619FD0914371E31107C75472E27DF
-:10A7D000A4DB501F6D2CB567A3DEE1FA6EFF68EBBA
-:10A7E00072E4630FBE373130CF6BC2DE325C6F1262
-:10A7F0007A152FF079C57AD7B2B9223EE67C942D2E
-:10A80000FC3D882B26264F1C1C57DCA83F09F6E090
-:10A81000E86209EB89140FC6B53B8F737DD0D0F188
-:10A82000D0A7C8E7759F98A9BEEABB9D0F8DA53A32
-:10A830005BB7FB56F42BBEEA7CF856CAF3496B09AA
-:10A840002E0FC29784FECB8709580FBAAAE3C30420
-:10A85000B2AFBB26AEF744A09F927B275E07BF81B5
-:10A86000F80FFC17E2BF9D3DF99ABF62C579571DED
-:10A87000505C889F5507F20F55A21F71B8381FD53D
-:10A88000B874389FFC953CF4576C01FF455B4F65ED
-:10A8900032AF77E9EF0AA33C81C44673FE61E92138
-:10A8A000FC53D3FA0ED9F59A3639A46E507BCE9D5F
-:10A8B000ACF07D7E8D7F5A2427F1C776DED6B4EDCD
-:10A8C000A4F5AD34B610BD1BB618F9FDADBCD5EA84
-:10A8D000AA3D2CC683F8388497800E334D5EFA6EFD
-:10A8E000C5C154EEBFEBE9F15932CF631C3CE1BE68
-:10A8F00019F9E560917BAC7D08FBE061C53C3E95B4
-:10A9000004BE5BF97925FDB853C93C8E8F8C0D3D93
-:10A910003F3A605F9239FFCC340DFD3DBD9F69F237
-:10A92000C4D83306E08BA39546FB3AE1B78F08FA0B
-:10A930005E42D55D46F20F8E32FB3B5867384BD3F3
-:10A94000AF93B95DD5F2DDAE0D2ADFD7197CAE919C
-:10A95000F4E47C6D3EFD7969E1D7CCD7F935EB3570
-:10A96000FD37868D41FDD722CEB9ADC90CF306E780
-:10A97000A3F4ED7EB18F81E775B06DC8FC98F23617
-:10A9800007BB4EBC41756627C2D8689E97A3FCF5ED
-:10A99000AA61F2D70D03F2382F84BF347A5C10DF3E
-:10A9A00055D1D3E30D81776D9F2D5CECB39D56DCC3
-:10A9B0006F24535DD67913FF8E9A9FE2AB864CEEDF
-:10A9C0001F5D2893685F1CE01C650ED2EB1746F0F4
-:10A9D000B8EABB0B24CA9B76E1788C9F5A24AAABB9
-:10A9E0005EE5EB35211F8D695DF224C9AB871D63E0
-:10A9F00041DFA9986DE17671806EDABA07EC568C6A
-:10AA000087EBE1386A713CDAC159C2EEE9CF218D9A
-:10AA100065BDE51857563B2507EEDBEBE93D77E1D1
-:10AA20008477E2FF013A9F4B761F21FDD67B7901A7
-:10AA3000E63F0F667E3E0AED65ED307CFB3BC1B71D
-:10AA4000DAF7591C63D546FC3EC98F12DD9F207E84
-:10AA5000FB0DDF468E63F87CDF7FAF91902E8CE894
-:10AA6000319C9C9C12F39D4A16DF258CE3FB24CB82
-:10AA7000B18FF26AF48EA4FC42F68DED4B35EC7E7C
-:10AA80003707F5D6C5AE0339A6203A9E5F03F28E8E
-:10AA9000F6A3635F826A0BE63303F1972469FCA691
-:10AAA00008BB18CA77E791EFB2B1FD30321DF5EE61
-:10AAB000F6A391B7E07CBB783BC09FED328D8378E5
-:10AAC00067CCFC8860F89E24F82EB4F07918EB1B54
-:10AAD00053353EF87EE3707C6B4CE1F584217CAB12
-:10AAE000ADB705BF8783FE7DA799BE8783F9E6E8EA
-:10AAF00020B9484DE1F230497CFF660AF3D0F700F7
-:10AB00002789EFE04C51984F89C17D2E9FCCF76586
-:10AB1000F9798602C1BF93145F17D6394C11FB3205
-:10AB200085AC97C64D677E6A9DCC4EE7148A9983A3
-:10AB3000DAC916DF9D9876C96E69A1FA3F5F821265
-:10AB40007DD622CE430C41B7C0FA15FAEE0DF1A521
-:10AB50008CE76186FE6E4A650A9773FA3807D2F76A
-:10AB600002A3FC147EDF0C5F325561155877749B8D
-:10AB7000C22CE100EFF6B70D24BF9D7DAA17EB4074
-:10AB80001DB1E2B92F18D5BB4E7272F944D382754C
-:10AB900012DA7AF5782884F9303F364981C892F084
-:10ABA000E8A3F7DDCEF8398D22A6D207566EC78FFF
-:10ABB00027935EF7539C54027112EA7583C543F8DC
-:10ABC00028C3E4CA44BEBF1109F314364BEC38EE77
-:10ABD00057A4F1F56AF3170223E0B9BD32B15E4C18
-:10ABE000811E8FE1FB1E9154385C6AE7DF094AA0A1
-:10ABF000EF04DD285EFB13F8772123EFF75FFC7E7F
-:10AC00007E60FFC781DF0D8A0C7C8FD281E74C30DC
-:10AC10007FE753CE07FBCD77A72CAD4E9918A897A9
-:10AC2000636EA6A25FA1AF9743F49D0B3ADFACD54C
-:10AC30007BBCEA9DABE2B9B98571163A4F9B6B19A3
-:10AC40009587762B23D15D9D42751F5B6EA14914BC
-:10AC5000EF44574480CFADCC3919F11CA8D7E3DFBE
-:10AC60004F1A38CF94C0E8FC9FD5CCEB199F01B99F
-:10AC7000C0EF178154A958D7C29E28A1FAC7A7A22E
-:10AC80002D0E3C87604678AD01781B2DA2EE47570C
-:10AC900077D96833D0F7381B59389DE79E15E6FE03
-:10ACA0001EAEFFB188623A2F9DB56D5A12F983B07E
-:10ACB000DE69DA7A0D83EB10B1FE0F9FD3D7FF69FF
-:10ACC000EBC2E3EBF85EBBC097B64EBB76DEC7A91E
-:10ACD000849CF7D1D6FF4C385FA71177E2D3E859AF
-:10ACE00015F5837E7D1A3FFC3FDDFB356D605C0012
-:10ACF00000000000000000001F8B080000000000A2
-:10AD0000000B7B2ACBC0F0A31E818565181826F1A5
-:10AD1000A18AD112CFE066607804C42C3C0C0C856B
-:10AD2000407B23807424101F01E2A340ACC2CBC03F
-:10AD3000100BC471403C07C89F0BC4A5409C05750F
-:10AD4000632B0B03433B107702713710EB3033302A
-:10AD5000E832136F7FBE0803C31309045F51126802
-:10AD6000A734FDFC3FD8F00A7DFADA276DC0C0B0E9
-:10AD7000D502C15703B2B759A0AAD96E81DF8C1D85
-:10AD800068F23BD1F8BBF0E83FAB87CAB7D540E5E6
-:10AD90004B693130782285899D067EB7A0E30AA0F1
-:10ADA000DE4A200600FB72DB43680300000000005F
-:10ADB00000000000000000001F8B080000000000E1
-:10ADC000000BE57D0B7854D5B5F03E731EF3C8CC6F
-:10ADD000641242483084092FA30D3821210D14DB61
-:10ADE0008140448A1AD42A54D4098F24E435011F9F
-:10ADF000176BDB0C04232060B058A2463B4150F097
-:10AE0000061D6890200107B034F4A206AFF5D1F614
-:10AE10007A8352400824E20BBDB6FE7BADBD4FE6FF
-:10AE20009C9319A07FFBFFB7FFFDE3D71EF639FB0C
-:10AE3000B1F67AEDB5D65E7B8F6C3213692821DFCF
-:10AE4000C2DF0F089926114206469EF6D7889BC49A
-:10AE500013529F4DCB4984A48D2041221032B986D4
-:10AE6000967309597B27099A3308D97FC484DF5721
-:10AE7000FA5899B60B99AEA1DF47B2F74F64D27674
-:10AE8000F4FD1317446C179841829B693981D0DE19
-:10AE900086133A840F9F933D0DD6D1B47ED39D2661
-:10AEA000627613F2381D868C27C441BC56429BAE95
-:10AEB0001CC1FA7B6C86E93951808FE19479B4BC6E
-:10AEC0006A4A49DE2A5A5A2D33B81A67973C17A0A6
-:10AED000FDBB4CC3711EB4DE13765AEFD1F74AC9DD
-:10AEE0002ADA6EC31C93509245EB352BB3825991ED
-:10AEF000F9ABCF3944E2ED0266533E3CBDFC195636
-:10AF0000E0F98B89261C674D0DC307ADA798520841
-:10AF100069ED3C60F1D1FED654B61E2DA4DF1F1999
-:10AF200061F2500C92473A0F58AFA4E307724D9E5E
-:10AF300091B4769A14165CF6C878E309057C1CADCA
-:10AF4000E7D96171DBFBD7A7FD4E8279AFA67817F1
-:10AF50003322EDC6029CB4DD1A4AB2101DF797B237
-:10AF6000E7308CFBCB1B12850089D4BB1E80847A12
-:10AF7000734C244CEB11A9D742E838AB26BE6519B7
-:10AF800049EBAF2A32C124C81A8FFADD6325D0DF1E
-:10AF9000D4518747005DAFA7DF611E598FCD8279FD
-:10AFA0003F3A452180FF5F0AB41E457163B1F24309
-:10AFB00080CF51435CF09E3EBDD1F0DA2658100E92
-:10AFC000B27A0321790440C0BF55DEE08A61C05FD8
-:10AFD000B9C403E5340F6D6FEFDFBE4B30235D1A4C
-:10AFE000E5402AE02F16FD46707CAECA5C6C057AFF
-:10AFF00010D29052349A90F580271854F2B9673ADB
-:10B0000022F557080C3FEB64E215E8FCE27295E08C
-:10B01000528A6753966B36CCD7EE53C875B4BC5280
-:10B0200008A48A4097D10AD9EC46BEB08EA4E53573
-:10B0300057257A80FFEA85508A04DF6FA0DF699781
-:10B04000078AC6CE06FE6CF228C8CF947F0E03BED8
-:10B05000D7F812C92A377EEFC4F6F6112E33628272
-:10B06000C243F13280F212E035FBA6FAEB87037D92
-:10B07000C6995C40A155C224F73C909F048B0BC637
-:10B0800097C7DD8CF49307260A4443EF9F03BD293D
-:10B090009ED6BA8B7E0ECFA7723F4C1849EBAFCE2F
-:10B0A0007EB911E8F4F4FD16A4DFD3E33A17815C0E
-:10B0B0003D7121E73D1FCAA5E2D94CFB7926FB442F
-:10B0C00006A1033E36EDC304C0DF90110DF7102733
-:10B0D0007DCEE8AD2563287CA4A1687E06F2897048
-:10B0E0000BC5EB90250A715B182DBF25F09D7843A9
-:10B0F00059AC6CA7F319C2E9DCDAF996A518FA9BEA
-:10B1000043C2A39CF8DE929C18D13343724938990C
-:10B11000F6FFC4824328E74F5F9DEC61729E82FC7C
-:10B1200092CEFB4983FA54BFA45848208E3E8774C0
-:10B13000F4DE0C700DC93C3107E0DCFFFA2101E8B8
-:10B14000F6CC986437E8A3045F27E9A2741F92F550
-:10B15000CE8350CF610FA6146561FDBF603B03FC39
-:10B160002D6EEF26C0DB36A1E630D027906DF23091
-:10B170007A333DB8FADEE420E89121B63FCD14875A
-:10B18000211F10924CE1731194937A216C190EEDEA
-:10B190001E60ED8692A000781E921958243AA1BE36
-:10B1A0004F2872F41FB7153422C807E574E0D7EDB5
-:10B1B0000A292F8A2207AF7279AE17C82CE46722BA
-:10B1C000FD15F8666802E31BB5FC0CC043C7DDFE45
-:10B1D0005AE20FB3283CBF5A322C5BA4F0AC857600
-:10B1E00051E4660D97035B07090814AFFB7FF73B3B
-:10B1F0002BE06DBB899441FD4999214B17A72BD0BA
-:10B20000630161FD37656DB4A0BE103291EF16E4A5
-:10B210002B5EEB1890BF65828FB64F7131BDECF09D
-:10B220002841D0CB8E948060A2F0B8B3886B6306BF
-:10B23000EB2E40F13717FE018C2EB1FAABD7240468
-:10B2400057D1EF73B3A8A001DE28AE4C74DCF984AB
-:10B25000CD73AEA77E11D08F902213E073958BD162
-:10B26000A709C6A153694A63FDACB98F0497011FB2
-:10B27000B958FB11D084D26D44EECBFF22D07ED3DF
-:10B28000783B907B68179712B498683B778D89203C
-:10B290007C52F8B000741F9DEC06789A523CFF3E39
-:10B2A00003E09F257936D2CF23000EDA4F538DC9A4
-:10B2B0008BFA225769063DBDCACBF4BC8AAF0C3E5F
-:10B2C0006E9A272CD0B9930CAA27114FDEB0D50562
-:10B2D000E52C064F462E9B571FFCA395E032DA382B
-:10B2E000CD1226504FC54309EFAF84CFC39E125CE9
-:10B2F0002101DCB90C6EBA2E233C69594A33C8418E
-:10B300005A0AEBCF4DF1A3E21DE0B2A970E5D2FAE3
-:10B31000A0873D4A33B0828DC35792C5E0D97FE400
-:10B32000AD0E81F5877265E3F0DAF8FC09C09BCCBD
-:10B33000F53AEDAF450E0B22AD1F1C47DC1BD9685B
-:10B340006E292FF2FDB11A8A075AB0F371C87A3309
-:10B35000CA037D15F896F2C1BC065ACE8CC8C7C880
-:10B3600015669DBCD8F9BC49039323CA366168971A
-:10B370004158D904653A8F924CBD9C118FA64CE17F
-:10B380007000BF53FDB374BCC2F8E72A66C710A2B1
-:10B39000A9077C3ECEFDEC6AFCAEE0BA9EFE5345AA
-:10B3A00007DF909AE4C922E8938E276F36015FDDAC
-:10B3B0004B4C623CF2B3D0A7BFE8783B1687AD3068
-:10B3C000495B475122E02DBD2671B20278ECF06155
-:10B3D000D9D651E3C5272C4D6309194C34E3648059
-:10B3E0007E7555B450BC921A2504FA7A9C164EFA12
-:10B3F0003DFDB5869940AF87171D4A05F94D36B416
-:10B400001F631A86723AE4355A0BC73FF133A8BF5F
-:10B4100092EB131B403C169FAFC173889DEA59AA5B
-:10B42000A7D3298295B1117DB1EAAA77B27D76CEF4
-:10B430003F89F80CC3D3A85734F5AFE2F503C245F2
-:10B44000EB9DC07A2A3CC6EFE70413EA2907D89996
-:10B4500014BF8F12D76C5C973D265C17E3F8FB9006
-:10B46000E7C064A4678878840CD0B77F356BF9E0B7
-:10B4700027F012F4AD14423951D26D681F52398E43
-:10B480008375AF49AA2983F7A1341B01BD7060EA17
-:10B490002101F099D6E61B0A72A8DAB9933DA114EE
-:10B4A00078FFC861DF95289F31EC46D54E34CEE752
-:10B4B0008A6B97A13E18EAEBED80F5DE5E2979AE46
-:10B4C00003FEF251B8ECA827DDE4BB147E4F6029DF
-:10B4D000E859B78F9607D167257F96B1EF2B6BCBD5
-:10B4E000728E4B917E578EA0F628D58BEB3BD75BA7
-:10B4F0006E003BA3C6E406BE5DE379CBE2B54379BB
-:10B50000F200C0736B916AF78505182FED6D2FDA85
-:10B5100079E35C8A0B94D6687338D5A5592F9AA61F
-:10B52000BE3316E020B75222A6C6A6239D2FF2599D
-:10B53000ACF504603169D691FD993B707D799D5CD5
-:10B54000857451D715751DC11EA97E99C7E5E811EF
-:10B5500077C822A0BEA2B24BE9338FEB113BD79B39
-:10B56000540F333DC7D793358B92713D51F527D892
-:10B57000D6A024E6717DBB26FBB9841B284C76D06F
-:10B58000B3A09752C864587F47829E01FD240504EA
-:10B5900018AF699C8BACC2754CAF4F47D6303DF8A5
-:10B5A000480A417EA2EB5033AC774D69A114E8A75D
-:10B5B000A9E680E0D3AC9FEA7AE7A8E924A007E7F0
-:10B5C000E6B2756E6E161BEF0F80A0710C5ED0ABED
-:10B5D000C675EF171377A0B28CE3F69611FF828938
-:10B5E000D9818FCE780BF1B866FE63F8240D1BB0BD
-:10B5F000BF140BA3C1CACC03F87EB5CF340DECEE5B
-:10B60000F552E78A1114FEF5D3E62A01FA7DB587D3
-:10B61000F95DAB26CE7D0ED635B3496170D594A1C8
-:10B62000BD1AC7E1DA007DA39FA8A05F74DF9D1B50
-:10B63000570CA3FDA4503F467043A5A0C54CBFDBEB
-:10B6400081A6A0BF7D6106BF874C2651E0FF0FC1D8
-:10B65000C6FC505F67C748A4A7C905F0C6797A2D14
-:10B66000E027BAA91FE67603BC6EEB6884D7E45ADC
-:10B67000EA8EB4FF3DF717EE82851FECFBD9EF4C45
-:10B6800003F95A7727F3CB8CF0DF3729D861C271E1
-:10B6900008BA758E18789D031A0CF48F27887039B4
-:10B6A00032195CC70546AF473B275F8F7E52117D3D
-:10B6B0004F3B7AAC739815E4DB68EF3D1DF74136DC
-:10B6C000DA3B8675E652E521067D3FDA1C9A8EFC50
-:10B6D000B6CD847A8A10A6E70462727F3B1C1611ED
-:10B6E0000617B21ED5DFCBE5F0ECF9B4FEF29D767D
-:10B6F00002F852F9218DF7B9AA86F24194797708B8
-:10B70000622CBA333B83D3BD13C61B7869FA5369E5
-:10B71000B682DD160AD60F2E07FFA386F9BBA1F06D
-:10B7200001D43F69536E433F654B73F2ECF9C05748
-:10B73000995E0FA0438507EC93687EE27493E5A2BF
-:10B74000FE7B2C3DDC58B91CFDDEC6CEE8F39F68BD
-:10B7500062FE7688EA494F56ECF1F34CCC8E4E30BF
-:10B7600071BE9B7A2845BB9EA9EBAABACE0E914822
-:10B7700040D4AC87B772FC19D74D22355846313EBC
-:10B7800047FFB1713E8B436C9868C2F88ACAE7B430
-:10B790005E0AE095CE03ED39CA8741B0E71E250D5C
-:10B7A000283701DA7E33E90FF79DC47459F39BC043
-:10B7B000E7D7371EF7AFEFE2FA6A5DF6FD56E88A83
-:10B7C0008E9702FCE177323D59E560766CC14E39C7
-:10B7D000FC030A4755B3807696699F15E13CB7890B
-:10B7E0009669D7618782F5CFBA2C58F69B3BD77EF6
-:10B7F0008F967B778A04EDC84C9B09F8F504E757D0
-:10B80000924BCB600F5B59B1AA79FF5DD05F599B1A
-:10B81000995869FF55BB4B6FFC1E2D9776C804AA3B
-:10B82000546D5EAA0CA6E585412104E59EC974A16C
-:10B8300002BC242A41F0DB7B9C9DC93FA2F33E5D04
-:10B840006B216E0A4A9DA333F9568A8FF2E0F642C5
-:10B850006857DE228046A4F3D87C2815E6B555F05B
-:10B86000807F5FB1254E670F9EA053F901FDBE9802
-:10B87000CE13E4B2943414C23A57B5799DE2D6C4DB
-:10B880001F4ED7BA701CB55CB5958E43DB55BF28EB
-:10B8900078608AD526E2033D746EB775D6B3769884
-:10B8A000DF52659403E6F5B002F54A83C52F5BDDF0
-:10B8B000005FB35248BF9737352B10DFF29BC9DDCD
-:10B8C000E0E7566C19A087AB5144795D9C60D908BC
-:10B8D000FA9CD8BD29378FEE4FE7D3B554C78E8A6F
-:10B8E00094CB411F221F0695999AFA43C504E4D7C9
-:10B8F0008A2DA2DECEE6EB7FE028A37F60AF03E3D4
-:10B900007E2AFD16737F59A5DFE2044E4FA9372F1B
-:10B910001A3C6B811E149E06C0177DAEE6F03927D7
-:10B9200092491077717A894B88C2D7C667834C8A4F
-:10B930008175FF75D9CC49522ABA0F8B20F2E45A8F
-:10B940003E7BD2145AFEBDA968B309F587C70D72B4
-:10B95000A4FAD9CF98985CD6A72A88BF86A979CFB0
-:10B96000B2F804C175AF616AC9736017D0F6DB4CD9
-:10B970002887B4FDE8D8ED5D85F9BAF6AEC232B5D8
-:10B98000FD4E6C6FB978FB86C209FAF10BCBD5F688
-:10B990007B117EFBC5E1775D37513FFE7595D8DEA3
-:10B9A0006F66F4EA4DB0A05DB3DCEAF14ACC8E0AD2
-:10B9B000C37B2971D446A827AAFC403ABD607FDB2F
-:10B9C0005B12C6AE225ABE98FC3AC0E1A0D2A2E5F4
-:10B9D0008BF87C9B8E1F13BC89BA32EDC975E23B94
-:10B9E000BC0C83382D088F3258417D3169B005E198
-:10B9F000BD7F9F15CBF74F60F0DE3FD88E72866B10
-:10BA00000BA5E3FD8AEF1AADDD0A2B138492DE103D
-:10BA10007D1F027E23EFDD26786F13490DEA673321
-:10BA2000417DF47046DEB3010D7E560CA1F4A5E510
-:10BA3000B360FF0C8CE0F5E1212529C59A71EA87F6
-:10BA400028B33666B1F7F3EC305E510FE0C1AFF4C6
-:10BA50008E02BBD2388E7958BE6E1C4B7A198EF38B
-:10BA6000B5611C737A99611CCBAC8DFC3D1FE71B43
-:10BA70009857AC711E1E36413F9FF4721CC72C1A9A
-:10BA8000E6935E6E18C7C6E643DFF371ACE2C5E627
-:10BA9000337CA27E3E432B719C2451D1C5ADCC4357
-:10BAA0002B0DE3D8711C780FE39034E6DF28E6DE37
-:10BAB00012A4FFAB5602F6B462F63D0FFD923F5A58
-:10BAC00009EA13371D7710E89544DC2FF80F53224D
-:10BAD000CEE70B1BA5BF5D4BE7806A17A0BDB38007
-:10BAE000834882F5E89F57731E9DDF32337D293CE2
-:10BAF000DB0A528AC1CF5EEFF040FCF45C5B81321E
-:10BB00002F8A5DB0A0413ED1A5E35FAEF72693CC6E
-:10BB10001AF0B3B81DA0964F50FD45A8DEFA90EA82
-:10BB20002F789E94A99EA6EF8F53FD46142DBC4BF3
-:10BB3000B1DD0989E1F144135B47BE587754C6383B
-:10BB40005F80BC9D49E7711B9FC6828638E62B70DB
-:10BB500038FC9C1EBDBBCDC18D480FEF1560F79022
-:10BB6000C6011457BCDE30C0171597442C5E01F691
-:10BB7000D18F576CFF0D547B47281EB298CE775655
-:10BB8000EB3AF90A5A3E2777DDE5B16BFA99257F42
-:10BB900008F3B6D0FFA09FD93E5AD68C7F4799BEF6
-:10BBA0007C279122654AB7A9E2304E0F3EAE3B2872
-:10BBB00003BD6E4B66F0DC09CFB1F0D985F4BACB8A
-:10BBC000C5DAAAF0F81F944918D7A3AE81CCB81DE6
-:10BBD00088F57CEABA6280EF2ED9E22DA2F4BCEBA4
-:10BBE0000111F16884B76B5F9CD744FDAAAEC64FC4
-:10BBF00065F02F2F05FFDD4BF4DF49808DA7E2555F
-:10BC0000E583DB674D1A705C536FB6EFFA01C735F9
-:10BC1000FC7247D94C5DF9CE9AD9BAFA772F29D65A
-:10BC20007D2F0E2CD47D9FB76291AEBCA0E1015D4B
-:10BC3000FDD2C6A5BAEF0B832B75DF2BB6ACD3951F
-:10BC4000AB424FE8EAFBDB9A75DF4DFBAEBA09E485
-:10BC5000B1EEF72201FBEC73FB89B5605F7D6E9757
-:10BC6000D0AFAA065EA37278AA3605F9FB74AD1BA5
-:10BC70009FE7DA72707FCC6FA3F24CD7FA0D75870D
-:10BC800097AE98087A84D6A73AFCA9BA379706A83F
-:10BC9000EFBE1182D494EFC546858407801F93D8E8
-:10BCA000C7D7BDA2E67BD725BE37D2052BA7FF7726
-:10BCB000B12BFAFB1EA17714D87781F7CDB87F138B
-:10BCC000CB7EA07F579028FE83FAEC86F88646EF5D
-:10BCD000BC2A32BBFA1A71F2AB227D562A4CDE2BFB
-:10BCE00077A44E867841A5121E5513C5CEEE1B2FA4
-:10BCF00044811904FD30795918BC2222BF48BFE1A4
-:10BD00003AB9BFC1E4DB07FAB97BBFC8F607C2077F
-:10BD1000D3619FE61AD1FB2ABC276D03717D7CA7F6
-:10BD2000D63BE0F80842DEAB9D86CF3FD4160D80AF
-:10BD3000F8D19F6A6761F9835A1F3EBB6ACBF0F95D
-:10BD4000616D0D7E3F5EBB04CB276A03F83C55BB9B
-:10BD5000029FA76B1BF07B776D2396CFD506F1A9C9
-:10BD6000CA816A8F92246EFF717B9DAE1C583ECFB4
-:10BD7000E720D27F77A25C7B5240AECFDBBF1805B5
-:10BD800076EEF9F7CC18448F852723BFC5A69F17F9
-:10BD9000D7FB9220A57F4EFFEF561BA38FD544A65D
-:10BDA000817FB672A44220AE6E7BF53B682FD3F73D
-:10BDB00012417D19F468F711FBFA87390FBA349DE7
-:10BDC000D4FA279EFCAFBCB959401F465FDB41B196
-:10BDD00086D1ED590FD04D833F6697EDE4FADC80B4
-:10BDE0004789CB9D119F6707AAF8EC4C87784B9544
-:10BDF000586492E8BBF3AD669CD7F9F638B68FED80
-:10BE00004ABAAC785EC516AB4BAB1FAA42092EBD31
-:10BE1000BE487569F5C5F98E679D20F78B534CAE0A
-:10BE2000E339C01F5ECE1F8CEFD4FEAB42192EBB90
-:10BE3000AE1F7DF97C83308DED2BBAE36F8DE21F51
-:10BE4000A8CFC5298AEB38D50BA7B70C8F8771A966
-:10BE50001FE78271BA6B5D2E366E8A4BCB97954B7E
-:10BE60006C585F852F56BFFF68F860C7EF230B8BB8
-:10BE700035419C2656FD98F4903E53C03F20EDF28C
-:10BE800017B0EED832D57547C2B2DAAF3F2406CC30
-:10BE9000D7C0FB16DD78B49D5BF5A1A15D6CBA4BF4
-:10BEA000E4844A4FAA27AFE3F921949991CE3EDA70
-:10BEB000633CEDAF47B2AF80386F86E4467DE787DD
-:10BEC00081283F5559BA149F1BD1DD8971CF7C550C
-:10BED000EEDDB7FF91B2DCC7FF26633C837C437B7A
-:10BEE000A7DF65FE753E2972829331B7B56206E819
-:10BEF000C98F4DAA3DD09007F33E4B4CB89F7F961B
-:10BF0000BCE5CCD1D86565128F4FAE60EB7380FE77
-:10BF100007F3A3769A6EBD2E6DD4974BC8CDC9207A
-:10BF20000F25EB65D8B1250B61BDD7EC9BCC925C9E
-:10BF300038EF5252530F76CA2A99EDA3CE7511E904
-:10BF40000A0A57D5AEA7F3C09EF54B4CDFABFEF304
-:10BF5000C2440677795250F1D2EF1FB5E6DCF63DC8
-:10BF600002ED83F5A0D7020EE289168F99B7420F32
-:10BF7000DFA5E037C24BC8321D1C6ABF2A1CE2167F
-:10BF8000216A9EC6CF2481C775987CAC91F4F6EBEC
-:10BF9000631C0F6A7983A1DC64A8AFF289CCF92411
-:10BFA00043F23D06FAA7CAD25B88761AA1FC911526
-:10BFB000A9A744EA6DB8583D33D413B15E93342E2B
-:10BFC000763D6BA4BFE668FD55EDDAF67280F2535C
-:10BFD000F94B8F3B21E8FBB1D4900CF1AFCACD0FE8
-:10BFE00039014FA7A48013E8FD71508C1A177CB754
-:10BFF0000F5F5EBB007E04B236C5FB0B8FDC08FA18
-:10C00000FA8BCD32E6C5F8B798C366CAC7D5AD0B73
-:10C010006740FC9E968FB1F2C39FC0BEA1BF4D4F3B
-:10C02000CFF2E71F4F863811C524B3B74918ED8EFC
-:10C03000EA4D7F2E043DEE27BDC887C67630FE85CB
-:10C040004494FB6225BEFF77355FC1CFE5CCDFFAB4
-:10C05000C8279097E037F04F59DF7AD2A5401CA14E
-:10C06000437224A15FFE5DF25DD0032A3E4890D961
-:10C0700013755B378C3946E1E9DEF46F4E41E777A3
-:10C08000333E3C1F9AF7AB57DCB1F5CC39EE0F4588
-:10C09000DA05B19DBB8DD93FA49D3D2BE5B013ECD6
-:10C0A000CDCA66D9433994546E7BF6B927C14F7B0C
-:10C0B000DF8C7E5AC5B6DFBC3381962BB6CB4933B5
-:10C0C000D874EC4272842E7EFABF2563237428FF55
-:10C0D000F56F14F768F6FEA789117A546CDFAF90FC
-:10C0E000D1FDF15710DAAF74D9A3D02574AC10ECA0
-:10C0F00095BAAD5F2AE0777DBC4F208332FAB72F27
-:10C100006BFE0DAE878027A423A7531FDDFAD12B2A
-:10C110007CE32BB958CF057A3216BD5EE07AB96A56
-:10C1200097832440FCF30FE6E00CA0E38BF7386123
-:10C130001E27A51AC6D74F3F940CFB7F657220D9E6
-:10C14000854FF6BEEC99FB90DF4A859A64B68FE97D
-:10C150004DE5F1F25498DF82A61FE1FC4A880FF901
-:10C16000AEEC69B108E2C39F4B64DAF628727183C2
-:10C17000CCF69F4E6E3443921F3909763ED8D76F66
-:10C18000891867256411EE83DDA7C671C9622C7F0B
-:10C19000CEF7A546C826D53FB4E8F875D3C39D4071
-:10C1A0009FD343BC83004E8A8700C79700FBFDE204
-:10C1B000D1A983187D58BE01B6A3FABF00DE43FDA6
-:10C1C0004E19F70935EDB8BE64E3DFCBC7A770DBC6
-:10C1D000603D3B99CCF62B8DF35BC2E747FF3A8974
-:10C1E00086BF34F2CDE47DD34A26DFAABC07674E72
-:10C1F00083EF9FBDCDE407DAC1FA41E10A0FC2EF38
-:10C20000FB6F15501F9849389A5C6F92B95CEBBF71
-:10C21000FBA99C425C80C22D413E43844F68FF894C
-:10C22000887FF44B4AD6D3761AFBCC0FE3613D25C9
-:10C23000F25EB37E94723D304DD6CB3F691A785989
-:10C24000F662A54C02605A56BE6F46BFBB729B5C3D
-:10C2500004F33ED372F09D1F53BE3E1352E554AF1C
-:10C260003F8D725AB663B300FC6994D3336574B5DD
-:10C270008E26A7F47D54392DEBFABFA23F55BCF9A9
-:10C280000D78A37A7068822936FE8C7AD021BBA300
-:10C29000EA41FAF736C9EBCF772ABFA97C462DB41D
-:10C2A000A1A0BFFBF851E5B73E7E54F9CD384F3D14
-:10C2B000DE8CDF2780A146E12ADA2DA35F52D9CE9A
-:10C2C000F66F68BB4357E4227EBCB87C9186435727
-:10C2D0002469CB41433964A8EF35948B0CF57D86F6
-:10C2E000728DAE7E65DB418525198575F5CC4B9E3B
-:10C2F000241F45B1EFD575C6DFFA8912007E48EBE1
-:10C300005540CFC9CBA86906F1B3BD22FA5B3DEE1B
-:10C310005E67227DFF9095F9B13D2E5E4E60E5DEB1
-:10C32000814A3DE839F57DAF95C5397B8A7A9D090B
-:10C330001AFFFE58BBE884FDE0AE20CB47ED0F4F5F
-:10C340001DCA4D1789F59DC505A78AF6F425E0BFDE
-:10C3500035881E700DE72FBDDD09FB6E3DEDC36F07
-:10C360009A45DF2F382C82F94C7A6CCE31001709B0
-:10C3700078A5D43C9E3F41FF4E91C02F2742DE441A
-:10C380003BB3AFE7AF36D8C3F67B15CC2F5BAF8995
-:10C390006B69F8BF9CF753D6A4FF5E4E5623FF95FA
-:10C3A0001BE4C1C7FD81A3AA3C64936CB6BF4D9842
-:10C3B0001FCBF5EE5431EBA65914EF3D1D22E6CD0F
-:10C3C0009E6F17493DCCB345C07D4E1218887255FB
-:10C3D0004D7A51DFA978E906B95162EBA3EE9DFFD2
-:10C3E00091F720F0C7CB7F1CF3147D76BFFCFEA82D
-:10C3F0003D50DEF56EFA1F49FFFA05FBBEC27DC453
-:10C400009E7D668C73F5ECFB6DFA83507EC58C7156
-:10C41000AE9E6566DC4709EC730447C2F721CC1F6A
-:10C42000A8DBFBE5189627B91CE9F48DCCFC91F349
-:10C43000EDFFF501E48F9C6FA7B302BB605F1CCAE0
-:10C440008DFF152BFADF3D7BBFCCF3D9FF71F3A92C
-:10C4500056880FF9CF4166ED007E4D60F160FF9E7A
-:10C46000F1CF427E7355EB7E05E2EC05AFFE650C25
-:10C47000E8C99E1DCCDE3927773D03FB6166E59355
-:10C480006532C5F339109EC1843CAB8C2D086445E0
-:10C49000C30BC3430FC503CC8BE2A50CF47B2C7CF0
-:10C4A000A42BFFACF8F8E42EA6C7BE8B79F611BC1E
-:10C4B000085EF6DE11B408387FF67EDF976340CF62
-:10C4C0009C092D457BE452F3BE5661FB2CFF73E6BD
-:10C4D0002D842F67DE73FE69E9CDF8FF43585F07AF
-:10C4E000F69783FE7CBEEB7E2CBFE8F020BC97293C
-:10C4F000FF3FFD9F46F71D94EECE4BD3FDA97FDA9B
-:10C50000795F8AEE8739DD1D2ED85FEED9FB178C57
-:10C510009BAAF3BFD4BC5FF97F74DEAABD3EDD5495
-:10C52000736426AD7F8484D71751385F4B9BFAF62E
-:10C530004CFAF5B731EC91D30A8B7FFC96B03CC135
-:10C54000408AC0F23CB85F5440D8BA5E90598A76AF
-:10C550004641E623681F10A9E64836C5C7F4F4052E
-:10C560001E960F3616CFA15C977AAD07E38106FFC2
-:10C57000F0A040BC900F5D70F5F51DE0AF4C499305
-:10C58000C3E631F83C06CF43CE69ECBD5DEF17CD75
-:10C5900000BF46E3E75DEFD67F2FE4FD4D238B8F91
-:10C5A000CCA4E34F4B135D416837A94182F9CCA07D
-:10C5B000C2DDA0D90F2A34F47708FC5A4DBCEC6FC9
-:10C5C000C55F9A99F991BFA5E36703FED2648C0712
-:10C5D0005E127F84E57F5D979A8DE75188E441FC88
-:10C5E0004D1F5CC5F1C9FC6689B797ECF59D20B776
-:10C5F00012A17E2FB3CBD05F56FDDE587826DC8F9C
-:10C6000096F8902ADEA53419F35535FD213E547A6B
-:10C61000FCAD7450E9F7F7D2E39C811E699FB92401
-:10C6200090CF026EFF4FF9AC53C4729A47C2FD28F7
-:10C630006EFF4FB2274860FF5F2B1D15412E4B2D1B
-:10C640006DD3214E6FF108C8D757769BD0BFB1E4A8
-:10C650000A88F7CC4609CB474DAE716068DFF8BD5C
-:10C660005D671E20101FF62A68789322169FFFE64A
-:10C67000DB6F27AAE735F03B213750FCCE6F2261F4
-:10C680001B9DE7028904E21321BE2B900F75F15D1B
-:10C690007D19FEBE9F1CE9E752F563E9917FF473B3
-:10C6A00017D55B1F52E6D80D4FDC57A12CA1F18F97
-:10C6B000BFDBCEF0E53F4282C3502F78C522CDBE0E
-:10C6C000D92366A63F76FD69470EC4C526F564C525
-:10C6D000337D3A02FD023FF70BCE13773CE41F9CFB
-:10C6E0006F1F1E8FFB821DA2C317252EB395FBCF94
-:10C6F000FF0AF914F4D9B38934C0398C1ED28BF1F6
-:10C70000D8C0264BD4FDDDFBCD6ABC89D38DFE8914
-:10C71000EA792337E68B04E2B574EB9EF1B134A6D7
-:10C720003F1DE0EF43CD7EC9DF8B5FF0D701BF5BDC
-:10C73000AD5D85D1CE83ADE0F8BBF1C05718C7BC65
-:10C74000BABDD904FC7BF526936EBF3160E67ED777
-:10C75000583216E0BAF180D5910B74E9103D903F44
-:10C76000E86FFF44F145D9B732E213FA87B8F83ED3
-:10C77000338BF3EF9143F300AF7BCE5A303F67B773
-:10C78000D250110DCE2BAD4CCF2D20A17BC664FC19
-:10C79000F3E177528F3D3C19FCCC4D84C7318CFCC2
-:10C7A00047908FCF6F21783E14FC52D00BE75BD8B7
-:10C7B00039608A9235E04F5379FF81362E7365DBFD
-:10C7C000F67F053BA0BA5D7041EA6CB5D4A540BCCC
-:10C7D000D5DF9620C2BA9BED56F32A5DA36FD5C86C
-:10C7E000C53E33CB373E3861CF1D30EEA7DD0A01A1
-:10C7F0007BC4FB5AAF13D6ED4FDB73E2A3E5CDABA1
-:10C80000CF5FD792E95324E88720DE8DFC90D56274
-:10C81000D395BF27FA06837CDD68EEBAD713857EF1
-:10C820003E0BE3B3CBD66FC1FFCFF4DBDBAA7EF3C5
-:10C8300089451A39CAB4F4D36F83A2E9B7C5827B9C
-:10C8400010E07DF1DEE18380AE8B0FCB03A3E9B76F
-:10C850006DB56C3FEF259E0FDBD34AF5DB351AFD36
-:10C86000D66AC1BC3863BB448B89AF8B97D06FC18C
-:10C87000FF1EF9DB06FA2DCA7C475A98DE50F5DB1D
-:10C8800098F663A8DFC6B49A7479A369964BE93722
-:10C8900061E0AD600F77C89EB828FCB38DDBDF2F59
-:10C8A000F13C3C1807F4DC1D16B6BF79B97A2ECBE3
-:10C8B000CAE87D493DF7DF846755CF2DDEA99E7319
-:10C8C00034F221D3738B77533D27003F323DB77845
-:10C8D0002FBBC7C1A8DF32FBE93782F5ABC3ACBDC4
-:10C8E000BF2D63C31CDADF58AFECB1D0FA6323FA73
-:10C8F0006E9C56DFDD6161F72EF4D3771D97A7EFAD
-:10C9000076727D47F5D830D0AF46FEF0B4EBF38EAB
-:10C91000F78C3FD9F26B9097D745DC373CCACFA54F
-:10C92000BD31FE642EF0578B85E9DF3ACE7FE76A92
-:10C9300003D87FC16B6C7E5576968F5CDDCAECC3E5
-:10C94000EA1621E8A6FF2C9CF09502F02FDC2B9034
-:10C9500041B43CD3CCEA93E7D57D2F32235BC30FA0
-:10C96000F3F32B306E3F5F221688CB57D80B3F86F0
-:10C97000787C453E8BE357F0F70B0F77D5433C7B34
-:10C98000E11302EE7B129E0FA0E63796B62FC57814
-:10C99000AD312F40D5E70B83FAF715867CC6663E8E
-:10C9A000CF996217E285BC2946CD4B6836E2A38356
-:10C9B000E3639388EB661F3E287EDC19FDF1412975
-:10C9C0003A233B3932FF85AFD379E546E6A5E2C38A
-:10C9D000383F35EE5CC1DBC59AAF8ABF7EF355F1B7
-:10C9E0006998F7B3A037402164931CC88BA17C8061
-:10C9F0007A23F03B11CFEF174D1A3948AB87B77246
-:10CA00007D9ED330A9209500BE480DF04D49E3A28C
-:10CA100043A974DEE3DE738F85E5F17B13CC3ED84A
-:10CA20001FDD6AED45BDA6F2D5D79CAFDEE178DC0F
-:10CA300033B806CFA9FADB0417D815FEB015F1E715
-:10CA4000A7F883F32B7E7E7ED14FF90BE4E9E01348
-:10CA50005F307CED15DC101F2F54D71FC03FAD9FFA
-:10CA6000D3CEF0EF0F0A88FF5CD28BFB23D58D82EB
-:10CA7000274CEB57B72DC2BC0755DFD23FBB961EE4
-:10CA80001A7E94A2F12356D2AC7F15BCDE8DE686C9
-:10CA900077803F6F7C5E26CD1AFECCA4FF7D1B8580
-:10CAA0004E2A3E2FC59717389EB6011EED80AF5E09
-:10CAB000663F85BFC27334EA77BF14D0E1B1E0C9E5
-:10CAC0000B17C5D338154FC0A7A0A7DA8B452897F9
-:10CAD000B409644046FF79C2FEA4566E17EE3DC607
-:10CAE000FA7F5AC07B4B8C7CABCEBB1FDFC6E057B6
-:10CAF0003897067ED1E5F2EDD706BE7DC3DA7B24FA
-:10CB000007F876AFC0E207ED09BAFDC5C156B6FE1B
-:10CB10006FB552FE867DADC3B267A3BBBF7CC7F1C4
-:10CB2000F50BEC7EEDB9A4AB602290F7B8C5827925
-:10CB30006408C73066576AF5EA362B19786B6EECD5
-:10CB4000FE5379FFB1EC1AB53C1AC6837CAF363A76
-:10CB50005E66643CA35E57FDFC4BCD6BD4DF39AF02
-:10CB6000BE3C4CD289FB4E1992EF51B3260FEE36E4
-:10CB70009E67442140FB4A532FCB72917A24C5858E
-:10CB8000E79FEE71A97CC6F2DD8B781EFB5471E243
-:10CB9000BBB07E7EEA65FB7CB926F2FB89A09F27AD
-:10CBA000CB788EEFD32332C66B3F9DC2F2386F7ABB
-:10CBB000FDA004719A9B4039517CDC344E407F05C6
-:10CBC0008E61C1BED92E6ADF7847E17C72E01C57C6
-:10CBD000F6A68602387F3C764BB00E9E9E82DEA47F
-:10CBE00037008F93440278ECF40E2880FB93EEF923
-:10CBF00033C1FB43E83A8BEDC7769081506F827763
-:10CC000020BA03E35BD717407C74E641BB1DEE6797
-:10CC1000C96C32519F2182BF09245807FBEDE38F75
-:10CC20007B6F0178CBA8BD0071E7B2F6E63A279496
-:10CC30009B048F9BF6EF0FF80A9D741EDB1A3F29A9
-:10CC4000FC0EC823AD07DDF89B583DFF26B87808D9
-:10CC5000DEAFC33C9B924D021EFCDA16148885F5AC
-:10CC60001BB4D07EB735D1F6B9B04ED0F6D0EFA612
-:10CC70004FDEBE05E4FD88C8DAB7B07DEA12DACE31
-:10CC80000D7CBB6911F6B7B0492029B4BFB216B606
-:10CC90000E941D913DF0BD75FF13B88ECDA0E3A598
-:10CCA0006680DE0F4F8132C9115C18EFAC1C8574B1
-:10CCB000EBE1724E268E64FA43E065EE37A876D338
-:10CCC0003B5696EF5BE259AA0CA0FDBC913F3003A6
-:10CCD000D202FC6D9FE0FEF3718A671FEDF228CF50
-:10CCE000DB3898FF91D2A559873EB5B2FBADE6B7C8
-:10CCF0004DC27C8605A408F3196E1CCFECB537AF86
-:10CD0000B506E18A8337E5DE34787FF05A33DABF3F
-:10CD1000E7B6C9C847E78674617CFA64938CE786F6
-:10CD2000EB9AD8FD5C275BD83A2E3ECDF6F54B1D2D
-:10CD30000A960F36DD5208EBDBC94DECBC63C1D35C
-:10CD400053152897360B1E767F11D38FAAFF56E214
-:10CD500062F908AAFEABE2F3EE97B768D07755EA1E
-:10CD60007A63D07755B0AFEC84A7FEBD9FD8991EEB
-:10CD700004BB1FE81EFE0AF9B7FA884CC0EE173E46
-:10CD8000EA2EC47CACBD02C6F3C7B70B5ED8D72F62
-:10CD90007BCF1C447B35587CF74F408FBF6F26827A
-:10CDA0001BF2DA29DEA97EC837F7FEE917F4FDC7C2
-:10CDB000472D900943F9A418F1ACE67FE66E667939
-:10CDC0002CB947D727C3794B326500EADBD24691AD
-:10CDD000F8347AE363C17BCB8F995EC6FB2954FAA2
-:10CDE000E52A0D25B08E0DB731BDE4DE2C438E084B
-:10CDF00039CCE324D49EC6F3B70B77AF4B5668BD4E
-:10CE00007A9EFFB170EFBA6491BEAF83F58BD65FA7
-:10CE1000A8B0FE17EE135CCD9AFED5F66A7F6A3F86
-:10CE2000CA6E7D3FC3F7F2F265F6A3C2A18E1FCB97
-:10CE30001ECFFFF70BEBE1BE98FC37454C3ACEFF17
-:10CE400068C670ED7E87FA54E3AF796F9B8857838D
-:10CE5000B7FC3FD98857C317ADE3A87C53BADDD0E0
-:10CE600026040194D671C794AA5C2CBB409EAB7972
-:10CE70009CB67A0ADBB76ACD3EBA1CE47B46AE802C
-:10CE80007C40023E654012DA416ED85F28CD65EDE8
-:10CE90004B697B90BBD627981C527DE0067D51DD07
-:10CEA000B4AE10EB6F12DCD07F6B7331AEF765F967
-:10CEB00022C1EF9B8EA1FD51D6762C09E495CAE7DD
-:10CEC0007A587FAB279AF13E2F55EE54397E53E6C0
-:10CED000F735595CA321AFFF41002A8AFC8A470835
-:10CEE000F3535B6494337F3E93CB37B78928CF07E6
-:10CEF000AFBD1DE5F0DC6621861C1728702EF96495
-:10CF0000907DEF93E3AD029763A61F4EDA995C170D
-:10CF1000C07790E39D02F707993D689463552E2FE3
-:10CF200025BF155B0CF21C436E3BA5AE5B61DC7B41
-:10CF3000AEB522DC05DFDFFDCE3DA87F64CCFB284B
-:10CF4000F8FE03C9A0EF4A2496AFA4E2B14A62F901
-:10CF50006CFDE058BF5449BD2C78F4703C657544B5
-:10CF6000F487087CCEEEE10A6C9291CF8D72F8F7CF
-:10CF7000CACF3F4A9E0F73FE51E111F7B2F6903FC0
-:10CF800016A678FA6DCBB398A77AF6856337029E1A
-:10CF90002BF650BEA5F33DD7E2E0F7BD04719D2905
-:10CFA0006F15310F9C48E1BC5B1C5AB96479481578
-:10CFB0002F39903FCA77B07CD2F2973F1A837922FB
-:10CFC000CB7A31BF2AF002B737035D6380AFCB2540
-:10CFD000960F6594F35B6DCCFEECDE1D370BE621FE
-:10CFE0006C61E7F4CB43B7CBC0876ABD1FDA64B589
-:10CFF0001EEE5F0628DFC2FE3AC0A73D77AEE641CF
-:10D00000756F65725FDE26A3BF54BEA519E3D8FE17
-:10D010002D9F609E7BC14BDB307EE06F13F5798FD7
-:10D020005B44DCC7A24FDCAF32E61F56B756E17E49
-:10D030005B7588E7F719F2DF2A5EDAFB7280A2A639
-:10D04000E2D7CF3B410F9CEEDCEC047CD2FE306F8C
-:10D05000F0FB9F49BABCA8D8F9BD5E7D3E6168650A
-:10D06000D47CC2D3F00FCAE00FD838BFAA79985B3E
-:10D0700006F03CED705E5194F87DDFB99D6D9F3FE9
-:10D080000379EEDD3BCE3C037057FEF5D367209F5E
-:10D0900089ECB3E2BAE47FE1F79827ACB6FB858D63
-:10D0A000FBF95B9FC7FCEA73EF9BD1CF39B7F764FD
-:10D0B0003AE4AF9DDBFE5532C4E3EEDD3B15E3956C
-:10D0C000F7EE2C1844A2E877F5097C19BC8CFC6EAD
-:10D0D000231D0EB61EC4BCABB3EF99519FF5E58579
-:10D0E00086AA589EAD9BE783B644CFA357F318ABEF
-:10D0F0005B6FB9E95AD0CFADCC9EEBCB6BBC541E65
-:10D10000E8DB949ED75C06DD5A789EAF816E67E1BE
-:10D110001F943E2103DD3E6F5DF0AB27E15BEB80AA
-:10D120009879A0E1CBC0979AA7FF739B778F0DCE1C
-:10D13000FDED880BA4307A05670860EF7D9E0EE751
-:10D140001A4EC9BD98EFD1BBD7EC827CC6F2BDEFB9
-:10D15000A27C9CDB7914E3AA84E7C99F237D7F2C02
-:10D16000AF59E0F3DBE460F9A31CEF905FEA76E2ED
-:10D170007B9E47CAF856CD2F8D9557DA6B1BC6E2BA
-:10D18000D0FCDC4015F593F8BD597DF9A6423ED0A0
-:10D19000E9982E4F579DB7B13F17D79B91FCE8E810
-:10D1A00079BB6ABE60844E6C1D51F39FCF35F3BCD2
-:10D1B00069FA3E6D2CE4C1B1F5DA1F14DE2551E4A5
-:10D1C00051CD8F3E6333E445072F2F2FFA52F0FEE7
-:10D1D000EFE2E3031B8B57AB78E9FE26BA3E56E23B
-:10D1E00098DD49FD53390EF705987F7A37F74F558B
-:10D1F0007CA9F0D68798DDD0BD85F9074679AE8E3B
-:10D20000715F52121FA7BA6DFF18D03BDD0776730E
-:10D210007E63FC5CDD728CE5DD52FD1CD4EA677E2A
-:10D22000BF84B1BF74DE9FBF3D7A7FFE964FA2F6EA
-:10D23000775AF2DE0EF09FEE6476D2E990382DDA5E
-:10D24000FD36963859973F50EF60F765884E1BDAE8
-:10D2500047F73AF2DF8B4F82A782793D754B791EF3
-:10D26000D0CF3C78AF689D633A01781E02FC68E23B
-:10D270000CB2CB47C04E93538A72457704DE3E7A98
-:10D28000249948504B7F299C06FAFC83EC9332F496
-:10D29000F79F86F8C87F4AA47E1085EB3F0382671C
-:10D2A000A93BB65DAD967D3F1575F18C6A73EF07AE
-:10D2B000609F9357ADB81F2EEEB306303EF60CBB01
-:10D2C00057E3E0CE2F9FC37B797E6526DC2E14408A
-:10D2D0001F94F238C5C99D5F3EF35F604742633AD1
-:10D2E0007EE933B43ED8CF2D7168EFF7EC881F0389
-:10D2F0007180D2571FBC11F44529E83EB0335F1A44
-:10D3000014ACA3FD9D18C8CA27B60DC17301153B07
-:10D310001C984F7870E7AE6AD0F7E75E8A23A0EFDB
-:10D32000CFCA5D7F85B27F4F3C6976A3DDE7D6AE7D
-:10D33000AB0B89E4D6DA731550D6E5B710CC6FC1C4
-:10D34000F81BE5E78AB6783CFFA1A9C7E539309814
-:10D35000DF133518E48EDA8D6E7DDE33FB3E3F8EB3
-:10D36000E92FBFB9F77E761F02ABEF577A4B58B95A
-:10D37000613093DB4EACBF48E557FEBD7FBFACBE0E
-:10D380003F8EC50322FDB0F6D56676BF8691BE3FBF
-:10D390008D13F879DCBF5C19EDFE8928F0B37BB9F9
-:10D3A000041280FB57C9762BE669552AE15190AFEC
-:10D3B000FEB2C2F63F2A9DE15190AFBE87EBBF4A55
-:10D3C0001B2DD3F783391C501FCAC4D2F522DEEBC4
-:10D3D000B4CB8AF7E155BDEAF0A29FF0F297279E01
-:10D3E000CA857CB538CC93AE7AF55F90FE55E6F0F1
-:10D3F0005DC0FFBDDBCD783F69F7F6C3E9603774E8
-:10D40000CBE1F4C48BECEB5485CCBA7D6A751EA7D6
-:10D410006B974C8073BCEA39C3F218FAE2F5389680
-:10D42000D7D11CE7FD15D373FAFB654ED7CED2DDFD
-:10D430009B586E89AEC75A402F68E27862E45C61FF
-:10D440000BF47B9674D50FA624A9127A717FBC7C4D
-:10D450004B461AF8BB07AC57E2BED501D98DFE206A
-:10D460003CB5FAF854AD2747C2F3F499391285A3B5
-:10D47000A7F99392C104F203ADB3A2E9A7BD7171FC
-:10D48000C84FE51673D4F39BBFE3FCB60DE46D1CE7
-:10D490001BCF931519F7801C54008E897637CEA7C1
-:10D4A0009CFA01EC9EA8D939DA73DB0BA506AC47D0
-:10D4B000E50BF1B190AC5772EDFDF5CAC225B93953
-:10D4C000520E2AACAFFBF84D8CD0890492D04E920C
-:10D4D000380DC9FA545DBEBF241759005F0A29727E
-:10D4E000492290BA01E5D44642F8B4533384AD439F
-:10D4F0003504E2E3A7F8FEAC59723F8AF7CD748891
-:10D50000A8CF2F85B777E39C08B759AA211EB43757
-:10D5100066B8C01E13023EF22DE587BADA6939EC0F
-:10D520005C38F142BE1BA6BE51F89CAE435F817DC4
-:10D5300040F98CDD63F57D12ACA3E3C131638CFF50
-:10D540004D66F7D91BC7FB86D38104F6EBEE3B870C
-:10D55000BF5EF5FE3CF0D7E3FF9A0FFB317617096B
-:10D5600083BD146727E1B831704F9E745A2BBF4EAC
-:10D57000C2CAC3283B835E734DD47F37F235F1486E
-:10D580009FF5E94511DB7F6668FFD9C5DAABF8F096
-:10D590005B367A8EE744F062E373084CF65CE8028F
-:10D5A0007C8C717AEA808E4AEF070F023EC6D899CA
-:10D5B0003F98D448B4FE5A8E9DE9ABE5FCFE69FA6B
-:10D5C0005764D7F4475C168C8FAEE478EFABAFC6E8
-:10D5D0004DFAD5B74A80D77EF5ADB1EADBA2D77751
-:10D5E000C482272E3A3C0931FA0F44AF5FFDEABBF3
-:10D5F0006F84DDF092E90D08CEF373CB3976F0AF8E
-:10D60000E23F482E665CC1F6030C74B301FF517E05
-:10D61000B08DD0BC87FFCBD2D06F5814FA9330F2C4
-:10D620005D31878796EDA914BE1F7370A76C62FBEE
-:10D630009573EE6571A21F5B587EE9317E1FD09C09
-:10D6400046E657CF59C2F61149193BE7E3A2FFC19D
-:10D650007877422794DE773608C17006DC5B63B0CA
-:10D660005FFBEEC759A840FD6243DC45E527F53C6A
-:10D67000D23C6E5F6770FE5C407A1D20F7C673EF88
-:10D68000AF71BDA6EAFDC03A9209E7F64593CD0316
-:10D69000FBA3223F674A9CEC3E3FE21DC2EE97533C
-:10D6A000F3B832DDF1B0BE91107FCFF759165FEFBE
-:10D6B0001EA43DA7255DB0E1FD2075B22705F4A0AD
-:10D6C0007C81DA75D455532E0C236ECD39326ACF56
-:10D6D000A170CB2E765FA2E42A22A56007F2FB019F
-:10D6E00048D2F43EBBEB4D8A87C5EBDC786E758182
-:10D6F0009DD999BF7014DD631F07F665BE87DD7382
-:10D70000ABA76360279B5F1DCC2FA33FDC758AC747
-:10D710008376E7746A31601CC783BFEF209ADDEF20
-:10D72000BA411EFF4D66BF57D00F0F8C7EE7931294
-:10D73000F15EF6F9CE551F009FAEE6F711AEA8CD0B
-:10D74000C4E7AADA14B43BEB6B3DF854F162F13450
-:10D75000E0BD6F9611AC3F8BCBC7EC0A6ACB403E65
-:10D7600085E4AA0943D9925643C0DEB5F6E1A70184
-:10D77000F1A3F4957D5836BBD8EF46C88D3310CF52
-:10D78000B43D29A5DF173B7C4F829C58DD57EBEE5B
-:10D790009133A78C35DC3768C09BCA1FDB18FED6D7
-:10D7A000088C3F8CF85B2377BA615F79CDF57DF704
-:10D7B000CE20FEA879CFF0F73BB6CF16137FAE444C
-:10D7C000B45FE7E7D5DF55475F3DC2F7171FAECD22
-:10D7D000477CADE4F7483E54EBC5A708F8A3F33304
-:10D7E000670508DC8FCE7E1B823EED455EB87F1656
-:10D7F0007817F027DA193ECD2935B8BF66B1337CEA
-:10D8000089F600E245B6337C8976C66F0A2F4B80D5
-:10D81000BF1C6C8FEF29FE0E007F59D226E8F0A5C1
-:10D82000244DBE3CFC3D41F147E148E2F265C44372
-:10D8300092C2EEA754E52A961DF7389D3FACDB1B3C
-:10D840006A093E07C6F0178739D8BA9964AAD92F52
-:10D85000033E12095F4F02242D8FB0D443F84B09C9
-:10D860001037940506076918A2BB57527449867B86
-:10D87000D9DC1B800FD61F964D902F2F2E99AE3BD3
-:10D880000F2ACEF226B8119F3EBCA7F9915A37D283
-:10D890006F1DD011EE01E5FED7439C9E0FF37B2850
-:10D8A0005772F958C3E5E5512E2775FCDEE4D5D350
-:10D8B000589E5552B689DF571626DA3CA6044F8883
-:10D8C00028142EB4A9DDF8C47B16C97BE6E048DA3B
-:10D8D0002E2E8B78814F12DE7B20C8EE6B2C4A05F2
-:10D8E0003B2841BD7F71A23B61361E840D4BCCEFBE
-:10D8F000A0AA10FD984E53B47BAAEA3C072C100F47
-:10D900008D054F9CC79BF1101D2FAED181F6FB00FA
-:10D910005FD1EC05B46C6F8CC3F85F1CFF7D163BC8
-:10D9200085BB5443EF58F7506F745C1FEFA0F4743D
-:10D93000018CF4F958E370FC5D96C7E522FC1D9755
-:10D94000C7F97AAADE73AEB6FB9AEB4767EED53A13
-:10D95000BF75BDECC576AE897AF95FCFF56DE2147F
-:10D960003D9FABFAF6789FBEF50D0378922F4C41A0
-:10D970003D96747374BD5B272B786F79DD6826E75D
-:10D980008162859D6BE9AF07304E7DDE376A23E803
-:10D990005195AF9611A67702C4E6C17588DF6FA3D3
-:10D9A000DAC12BE01E40AE5FE1298E60BF3F903CA4
-:10D9B00087DDE7BB9ADF63B596F215C17B4F3DF873
-:10D9C0009CEE60FB13CB2C63F13EB53ABB09F584AA
-:10D9D000F4BE39082687B47FBC0BE20592ECE9F46B
-:10D9E00042BCCF2185E0DEDC3A7B2EDEFB2E24E438
-:10D9F000BA80FE5F38E60FBD583E1D9D28DE97E9D0
-:10DA00004A2A221F66E16E009E5F915D3713881BD4
-:10DA10006E48AAB102DEC63B585CBFB1380FF14870
-:10DA2000F17B936360A49F41B3A6F7DD8305DD6EB0
-:10DA300088710EE60E07B397485A808CD0C879A338
-:10DA4000FA3B27EE00C9D4C8FBB2918504F687FAE9
-:10DA5000CB790C3DB699E9B1E542743DA6DA99AAB5
-:10DA60001E930DFA417DD60F9DA63BA7A524798074
-:10DA700077E1193079C0BE7BB9FE8E04C4430DE056
-:10DA800081A44CEFF35F7F300CECC7BCA8FC66D4DC
-:10DA90005FF3FBD6736F32D0E994EC1E341BF8E9C8
-:10DAA00070F4F57CD263573D0A7C30FF77A2A0DD8D
-:10DAB0004F29BDB002D7D3920BF9F82C6B9C867C12
-:10DAC0004F200AAEF1C34E36DDE704B84E36F23CC5
-:10DAD00080263908F919271BEFC3FB4A20CF5BD4F6
-:10DAE000ECEF935C37DA97EA3D632783F738B5FBB1
-:10DAF000BB25BFB07AC16E8DC55F254DD1FD7A586B
-:10DB000043217E4A01CC047B98DA37BD61B07F3671
-:10DB10009A3D011229071EB346CD4F5CEC98FA38A6
-:10DB2000E07DB1C3FB34C839B1B37B4163F3391B2A
-:10DB3000F7046C02C37ED3933C4F53F239B5F7BB65
-:10DB4000F5DDC7C9E324C412E3BB4DFD7D8318DFB7
-:10DB50009D2C9F83B8A27F57FD84B8889FD006F381
-:10DB6000A86A3C53FF3EE289FB091CEE533283FB5B
-:10DB7000D47366F63B3706BE38C5F347160A0CAFBA
-:10DB80002A7F9FEAB3777C780F8D91FF848D576D44
-:10DB9000184FFBFDB443C6385C25E51FE01B61E36D
-:10DBA00078CC5F171E1BFF28E4257D7644C4EFE583
-:10DBB000172CF8BDFB679E0D7320CEF3BA8CF7755A
-:10DBC0007FD631359EC579F471E8054EB6CE9FE615
-:10DBD000725F726115F2671F7F342C5040AE4A2E7F
-:10DBE000AC457BA6648B80F7449240EFA14912E7D5
-:10DBF000C309D0FE6CE132C0F7C406DCDF28DD6C5F
-:10DC0000F6AC12FAD3F9B4C3ADBB57BDB46B35F65D
-:10DC10004BA83D95A4D9EF3EC5F3804B2FB0FB0137
-:10DC2000892B405280EFB9DE89F0AFFEDED76E6BF4
-:10DC3000F438FBD7DC9E29B93041E73744E6F77D5D
-:10DC4000269F7C3D2FEDCA6770F5CD67C3F868F35A
-:10DC500089CC6322B6EF4E883E7E06C7F389DA325E
-:10DC600038B941CA1456AFA4E13E05F449495342BC
-:10DC7000A2A099576963852E0FA3B4A95899ABE95F
-:10DC8000374207DB6F278D88D02163AD7CDD323BC7
-:10DC9000ACF7450E278CB77161DE4FDCD01FD33F48
-:10DCA0001FCB0DE935A85FEE71463BD790E174EBD1
-:10DCB000E24AA58D9C3ED44ECED5D047A58BB1FD72
-:10DCC00089E6D2BC9F403CF909762B486CBD63A025
-:10DCD0005B4674BC4DE8C35B26E6035D1A6FDFD17B
-:10DCE000E5FDF4C31BA7AF8A17F53DB58F72005F42
-:10DCF0001320E03410FA61F4BF14BE22E372FA4F2D
-:10DD00008A3E0F5FDF3C969000B51FE65F721E0FE4
-:10DD10009280E522F350E94FAED6D1DFB776E475B5
-:10DD200020872ABDE71F7802F9773E9547D8973FAD
-:10DD3000D9709F6E7D88C01783EE2302242BEFFFDE
-:10DD40001CDD3F9603E990F71558C7D691531B1F6A
-:10DD500049D7E279B163D202A00BD934F0B2D68FA1
-:10DD6000C0644F871BD72519E361BB1D3EBF93BE1F
-:10DD70002FE37EF5F284C251D1D67DEA174E84F8A6
-:10DD8000735DEDB489106F93B9DD08BFAC05F6265D
-:10DD90005C811EED7EAD064ED7876A6B307E4D2CC2
-:10DDA00001E2D29EF725CC2EFA9AB0788BDA4E910A
-:10DDB0007D2E887F2A0229427B4EF2ADC8C8853865
-:10DDC0004652764083BFB54E66D7AD4E39E0827C71
-:10DDD0005233ED1FE2319634E9BC7E9F9295B385B4
-:10DDE000F132CC474E0A118C6766D1F71A7C2B4969
-:10DDF00014CE8BF89B92C589FB451261769A3A7FC7
-:10DE0000FA06D7B387F9BAB40CE2B849608799D05B
-:10DE10001F5ACFE394BFAC2DE27890701D3327B02A
-:10DE2000FA4A3C83DB0A716B11D6D530961D70C35C
-:10DE30008E885793E1EF8F261037FE4EDF0012AE2B
-:10DE4000C77B4C2675DD0FEFBD71BE2DC0075FA4EB
-:10DE5000767E20401CBAC87725ACBF8D6220DB4D92
-:10DE6000EBFF4AECCD867AF0FB5EEF25B2E750C8B7
-:10DE70005BF669F6A5D8BD9C6E6D5CCF581EBA44A2
-:10DE800032ECD77C73A5F67B739C7717C091F49125
-:10DE900080FB30755676AF4F9DE3B67858BF8F72D2
-:10DEA0007A21FD817F3A981D735E72C727627C33A9
-:10DEB00033E735DDF81E5D59E2FEDB26CA8F92E6B8
-:10DEC0005ED61192D704FC32B281BED7D22F4A5C03
-:10DED0002DD18ED7DF46DD8751E1A3E312C09F78B5
-:10DEE000A190ADAF063ED82330F8030EEE6F9180BF
-:10DEF00008F49CADDE172C2D6765F5F722808A1497
-:10DF00008EF7D5FD05B29C95F93EA57F2EDB8734B3
-:10DF1000C233BBFDE14E88EBCF6E4F9D07FB53B381
-:10DF2000EDA3FE0CCF3D72EF8138B003EF13F0FC90
-:10DF3000C78F7FFF9A1C479F3BDFDE88E78DCF723C
-:10DF4000B9BB8BF4E23DEC3EE2E2FBE4417C3F17DF
-:10DF50007E600ECB2119FCF439E1E08F6EA0A53B69
-:10DF60005F0BDE0066DB5D1DBDBF0135E00BB90A4E
-:10DF7000710F406DD7E639C4CAAC5D040F166E8FC1
-:10DF80005A705E91795B100FEFF7E58D07901E7D5B
-:10DF900078E2F72AA978E99B77FC6DD321CE1B4B59
-:10DFA0009FCDB667FE996D7E30B88C78FA0C3E51E5
-:10DFB0003BF233A7D71A4FF5DB474EAF0D9E959630
-:10DFC000DE746918CA8B13CAD5A26F6832C5C3D96B
-:10DFD00021BE2B07023E3A075C961EFDC0CAF40024
-:10DFE000C94DC7F9A8F7BE1F7CE0A403ECCEFA9D8B
-:10DFF000EFA6C3B34AEC5A733BC63745F487CEB796
-:10E000005E79D1F3611F40DC89AE7F23E3553E6426
-:10E01000F3BB9B9FAFB9BB350ECFD7DCBD44D4DD7E
-:10E02000DB7CF712967747A4CE31B7EAECF5E53101
-:10E03000FB813880B19F794B26938F06C03EAB6B36
-:10E0400012C6059E61FC356F8A57847CE4092B0457
-:10E050008CB78C3FEE6EEBA2E579C104FCBDA379D1
-:10E060000F2CCE817B08AA3B597C6F90B828FB67A8
-:10E07000103F39C0D671282F02F9B67BDD764DBC32
-:10E08000BF5BAEC9867BF70277DABDC03FC5B77A02
-:10E09000DFC7FB1C781C425D57773516631E6BF19A
-:10E0A0001C773ED0BD3864C5DF1F2CB610C946F5BD
-:10E0B00058B1442CF01CA410C90A4F1BB1C0336FD7
-:10E0C00019BB27BBA47126DA07CEFC2205EEBF2DB3
-:10E0D0006E7FFE73685F2A85F7B3732D0C3FC5ED25
-:10E0E00087BF02FE59E02DC2BCC3EF6C5174FEDF46
-:10E0F000E890BE7C4D9BBE9C1DD697733AF4E5AD6F
-:10E1000070C799C68E38B0D78CEB44C519764EEFE0
-:10E110001501D62688079B519E0A2ADAF3603FFA3A
-:10E12000CC8B0E137CDFF317E6F7F66EB5E27D6F4E
-:10E13000FBFF602336C82B7CC9BA11BE9FB185F2A4
-:10E14000200E47EBB3DFD92A0A8D02FFEDE5AB5570
-:10E150003F3D3806E6F5F25F599E4CEF5633FE7EA2
-:10E16000CA99DDCFBF08FB6267B65E8176D62B42C7
-:10E17000C004FD065632FA1BF9B4628BDE2FBE3F97
-:10E180009EE99B1E81E1FBCA46FDBCAF0AEACB3F7C
-:10E190008F67FED45CA2799F01FBF7EEFA14585703
-:10E1A0009F8D7EDFF0435C2E5E784151F956E4F797
-:10E1B000B311B7E6FCD29EC8FEDDBD57405E05E058
-:10E1C0006258E47D85615CB5FFA278B60F9FC4F705
-:10E1D000677A5F17113FA70DBF5BD867D7D5D6A465
-:10E1E0004ED1AC43258DFB938BC13F6ADA9F3C57E0
-:10E1F000B3BE546E3D987C07E62549F8BB4C95B3F9
-:10E200009F5B3B2109DE8B218017BE43DCAB3BF4D7
-:10E210001B27D4A3F6EE585183F7D2C6FB52A7684A
-:10E22000E4F46FE54B559E2AB97DB22BBFB310F2D3
-:10E23000C42B1AD9EF3755847E740BFCFE22696219
-:10E24000E74CF324522452F9A9DCFEA31FC2EF715C
-:10E25000F99F1EE701786817B7C2FB8A964FF03C1A
-:10E26000C12AC3EF08A8CF7D9CBEB47ED844EBAFD3
-:10E27000BACD5E06FA89F6FB1A940F646EC4FB4DA4
-:10E280009CA7589C96BE7F0F7E12E5D4E4C01B77F6
-:10E29000D0A66748E89D1B3260DE7A3EA37C2B80C7
-:10E2A000DDD5BB59C0DFB5A59656DECD60527B9754
-:10E2B00062DE2DFD7E77B4F3CE0B83FA7E8CF4FF05
-:10E2C00003E75FFA97A9E52363BD013302782EB116
-:10E2D0007209D5771A3BBFF27803DEE7681C078323
-:10E2E000709A7C03582FDD28DF56F5FE21C192C7B6
-:10E2F000F36687B332DE5B08FC4A19A5E26A32C5D1
-:10E300000DF8BE994C83E72B4278AD28323D8171E0
-:10E31000A06D71A827BA5D5DCF3D05FCD5321AE32B
-:10E320004F83F979CF6E7718EF79ECE1F1C96E1769
-:10E330002B97B75B310FE6CC5905F5E8D2D04127D2
-:10E34000D0A3FB45AB097E97F4CCF60193214FB2E5
-:10E350003BC4EEFF3D1D1A80BFFF1A6BDD32EA039E
-:10E36000759D3C06FF84F534DEFB35ACB76439CBD4
-:10E37000231D34A0263BDAEF49A8ED92949A6CF065
-:10E3800053FE17A753B28F00800000001F8B0800B8
-:10E3900000000000000BDD7D0B7854D5B5F03E7316
-:10E3A000CEBC92996466324926218F09841020E000
-:10E3B00024860814EB24040C187542D1A2B63880C8
-:10E3C0004080BC44DB46A55F2624424251428D0872
-:10E3D000087140B1F48A6DB0A8C106EF80F86AB543
-:10E3E00037DADE5EB5FDB92370295A1E23F452DBFD
-:10E3F000DBD67FADB5F799993349AABDF7B6FFF7DC
-:10E40000FDE9478FFBECC7597BADB5D75A7BADB55E
-:10E41000F744BE6EF1EC2D60F01728509C8C5DF235
-:10E42000BB3C9BA0BC4482573318333A7C465B3AD2
-:10E4300063D672C6BCF0CFF186BC5786FA53B2E7FA
-:10E440009BB6718CDDC57C0686CF72BF818D853E03
-:10E450009DD0388BB1650A0B290E782EF4BE2F4D56
-:10E46000A53263D07FD92E29D801FDEFDA6C64CCB8
-:10E47000C4E8EF33F8B7A217CAC5B1F22A16343090
-:10E4800019FE63575C3B187F95123A2AA530B6DA1D
-:10E49000C442C930EEEAA7B4FDD6B010C1D370E0D3
-:10E4A0003363FCF8303FC600B4FF64EABCBC6EDBEB
-:10E4B00034C69C0628C3BC236FEB838887FF907DFE
-:10E4C00034AF35CC4FE3DCDE5AC54EA531D67C5F88
-:10E4D0006BD65DF0BCD87A7FD65D57433DC201DF75
-:10E4E000B730DE9FC1BCF601CED654B3502EC0B7B4
-:10E4F0001CE69B5406E541293405CB26164829E342
-:10E50000EF53CBF87CBD71F0D5B31EFA5EFD2EED56
-:10E510007BF68B34C267031BA27AF6545C3DE0A302
-:10E5200041E0A1E100BC8FC3C3CC0352C07A159671
-:10E53000821D19005FD359C63641A9E9D06746CD7F
-:10E54000F8AC8731C04366126366A0D7A3125BD4D0
-:10E550005F42FD26D64D8136F8771D96DBA9DD0991
-:10E5600081BF476F5991E587765BEC50CE16089EC8
-:10E570000EDFD0E1C7A91C32C17792AE8E96A9BE3C
-:10E58000623D2FD7D98A6BB6E730B64DEFCFB201D7
-:10E590001297C9BED77480BF271DFE5B90DF96E936
-:10E5A000BC790ACE97798B7C00076BE57878ACACA8
-:10E5B00065624B490CAE187C9CBEDBA4FE900EF845
-:10E5C0002C7058F2EC7323DF46F47E4BAC5DB34DF8
-:10E5D000A279A41E0BBF3606E9FEBCC4F642BB1DE1
-:10E5E000D287AF8D817E3BE6B95907945D4027B94C
-:10E5F0000CDFB34E09F0527EA8EEEE5791CEE549FE
-:10E600009EF1F0683C5429375A68FE77FA009ECC98
-:10E61000E4963D3AA8CFBCB3B80CF91BE67DE702FF
-:10E62000787FAFCD4DDFCBB270BABBD6070AD69696
-:10E63000E0F77D77BF0ADF8B4C49F2E0F7330157F3
-:10E6400056073DBBCCD88EB54BD8EED1143E7EBA22
-:10E650004EBEB30ECB65BCEC582779F712F36DA50F
-:10E6600079671A590DC289EF8325B464BC07A93EA6
-:10E67000C8E93BBBA514C7CB1CC79F4E432807C79F
-:10E68000794BA5F760968E6520BCF0DF00CFBD0703
-:10E690002B331DD0FFAD732645970A4F176343D820
-:10E6A0004E0959183E0B8B797B93685F3A3B1317E1
-:10E6B00083334FDBEEA2DE9B7A35E025F08ECC90E3
-:10E6C0001EBFB37853EDD0EE4B063E8F443AF62191
-:10E6D0007D603ECD9F02E46971745B74C580E33553
-:10E6E0007FAAB0E0D5B1F7E7DA4C2C58142B37D419
-:10E6F0001F9B8BED1AD9D006E4ABC6FE64168CE3E3
-:10E70000F72F258DFC5D95BF9B3FD5B1401AB16FAA
-:10E710008ECF8AF8896C588EF01F91D83E86F50608
-:10E720001688FB7EF3A70E6D390A67068D136BC73B
-:10E73000B4ED067E4FEDD8F4700A7EE7822D9CE2A0
-:10E7400010F3C37ED9326B41BA5C0CEA027A58C727
-:10E7500017DCBCFE226335FD96587B75BC0B8B0C19
-:10E760002C44788FD0B8889700C8B69D839F18DC5A
-:10E77000506E183C4A7851F9211E3F8138B991D129
-:10E780003114D2C19AFE856D5557891948714C5D77
-:10E79000BF6BBABCB3A05ED669D6737279747D9331
-:10E7A000587954270B79D0D0553D2BBECCDBC7FA16
-:10E7B00037D654C3FA2F2FE1FD4FD89ADE58AFC495
-:10E7C000E411CC230FF1122D9B12CA16284F892B6E
-:10E7D000DB12EA9D09F5AE84720E6F7FCE1ACA93E2
-:10E7E0003D8C7D645B5BA3807C3997155A2C417905
-:10E7F00073C7BD35D520E71ACB87BC32CACF41C914
-:10E8000023B118FE9A3CCC1B04FC593C61C3B212E4
-:10E81000C4C3D06BB8FE1B06249B047C6EE93F1872
-:10E82000A232F673C7F5EB97A85F43FF87D46FD486
-:10E83000F18B75B48E37159FA4768000DB69A0D369
-:10E840005799C45201A5058AFF8FA8BF1AFB7FC341
-:10E85000F52E8B18F8FCB81CBC90E57D85E4E01122
-:10E86000C986EB2ECA7738AE25C6EF6AFB5F4D1915
-:10E87000FC571C26F9DE4FDA1568FF7F1A7F338DAF
-:10E8800001A97E854D66A05C0D4E447DBC93F927A1
-:10E89000A21EFA7AE3F8A33A6877421FDECD005F42
-:10E8A000C5F64D350AB43B610DE74A2043266DEDB0
-:10E8B000E5E5F4F06EC46760EBA384DF13B9E15CB7
-:10E8C0001D94A7DA43BC3C3EBC1BCBB76E7D86973C
-:10E8D000A7847365E83F3670A0A61ACAFB6C23AF05
-:10E8E000D77C3B97E32A7C97C779B3EDE9C8765C80
-:10E8F0004FECD603C6401E2E5EFDF1B3FB000F8B1E
-:10E90000EF4F2639B5EFDC57E6FB68FE019F520159
-:10E91000F290B33ED763248F15B203B250773962B9
-:10E92000F4B0E60DB949CE4F6A3988FA3E737109E1
-:10E93000C9F94F53BDEDF669B1E72719F00438DA8C
-:10E94000ED362E97659D97DA3F6025BB678B99CF93
-:10E9500007D60DD1D722E8512EE6536ED7D133CF4B
-:10E960003687C6FB40F2EE30C9F8640133D27355E6
-:10E9700012D91977EC01B90072B957C0DDBB7562C5
-:10E980003000E3DF21311FCA8D5EBB370BE5C30BBF
-:10E990007F91EFC4F9F69642199E3F16F2BEB7CEAC
-:10E9A0009B658FD38BBD7B78BD2A777A0B787F559B
-:10E9B000DF6476F0EF646E99B817E791AC302F966C
-:10E9C000972F2ADADB4E7A7B01CD9B79BD5912CC89
-:10E9D000F7F4AAB13AB42355FAA4157A6FC2F9DC58
-:10E9E0008EE35B627452BFDF8EF346BD2F83DE87FA
-:10E9F000F93EE0F0D3FCC10E984A76A0B003DA717C
-:10EA0000BED362F8654A781ABEFFFF084FF760FD73
-:10EA1000FF144F23C88B00B66B6C0579A18B93173D
-:10EA2000027FDBA4903E93CB0B0FEA397CBF00E45E
-:10EA3000E3ED36FF468447FDFEE2071AC9EE53E1D7
-:10EA40004AFED68B355F65C3D759A25D76E203D304
-:10EA500066067AEC84A19FE4E289F9CCD38EF24376
-:10EA6000C7EA118FAA5D5971FF9AB718D8B397ED0D
-:10EA700032D1B95BF266E1BCBA81AE26D4C37586E9
-:10EA8000E0BE82985EECB50777AC40BADE52E20990
-:10EA9000B8493FD27A0BB42653BB5E7B9829583FC6
-:10EAA000C36D034890CE448FC86D86E05E09E9CD02
-:10EAB000F9A577D5A4604022BA07A8FF6D9C7F7A9C
-:10EAC000EB18D9F7BDB7B9886FCC2C68467846E308
-:10EAD000838C0E467CC414EFD43A6B0C0F3F13EBBF
-:10EAE0003AB93CFCFCBFA11DB9D94C7624EA4CDCF8
-:10EAF00077B19E4C8217E8F902F187BA5F7A242B2E
-:10EB0000B889F6679E0AA4C746AB7709C1FFED64D2
-:10EB100037C2BFCBCCBA4C65B8FD609D24EF043C36
-:10EB2000ACE73186F6D99DC23EFBF7FA4B56B403EB
-:10EB30005EB573FB0A19C504F26F29E3F54BD725BF
-:10EB40007F88FB99A5EBE49011F62BAC6B8E371CFC
-:10EB5000B7CF208E82F1FC425EB2ED112BF28D1FF9
-:10EB6000FBA5E0F87FB4BA2D5886FE5391ECD0BFD8
-:10EB700038D6FF3DB16E17CB1C7ED696EC46FC26F0
-:10EB8000CAF5F754F87A1EF3C67F4FFD4EE2B8B0CF
-:10EB90008F7B1FF105780FA5A23DFF6D99E89A08BC
-:10EBA000AFD31079C80CF58BDB64FB7AC0A7BFD557
-:10EBB0004AF355E1BD3333722DEDAF12C63F93DCFE
-:10EBC00054A1E0FCC5FE83ADD3EEBF1833C4CAC068
-:10EBD00017CB5984F631C3DE8B7D6BE2BE8FB1BF9C
-:10EBE00018E3DBA9EB85B9A504F8055FB92505E9AC
-:10EBF000E69738DDA2F44E805BC5A7EC18199F4E4E
-:10EC0000433817E595BFD5487848ECAFEABDC7CC87
-:10EC1000B03E80AFB64B12F1E3F6FB92498F311351
-:10EC2000A763F3EA2437F2E74E43E4695A372F1912
-:10EC300019D2F5A239F202C9A342EE37B8F83379F6
-:10EC40000FB6BB90CEF9FAC2613DAD270E0CD83B92
-:10EC50003F93F752BDC4C7BDD09EECC6F5D88C9883
-:10EC600084EF3707FEAB8D01FE4EE9F83EB87940E0
-:10EC7000BBDFBD00FFEACB6272E122E3DF090C706B
-:10EC80003900335D45DFB923896D82719B7492171A
-:10EC9000EDA3A6D593821D9C5F4CB85E1A04484D27
-:10ECA0003AD8F795C5D67793EE6411EE9B1A4C9B34
-:10ECB00087E414AA3F8EFB2D86FB25E8B71A3B1587
-:10ECC0000CE7E7A6CDBFFD33C2DD74484BF78618CD
-:10ECD0007F489F49D83F8E5F0A627C40F635CA87DD
-:10ECE0006A161C2F713F0C96936B8682E887691613
-:10ECF000FE89F463E1B9C81FD6F27EB6149ECD67D3
-:10ED0000B97D317370CF2BB8CFB5D70CE5E2349B0A
-:10ED10005BD75E7DFAEA187D5538670C6E9571FFFA
-:10ED2000A6DA2571FBC7890BA6C43FD7533FDC8FFA
-:10ED3000E2F7C2F80AD785C2F5D936A1CF40EF91E4
-:10ED4000DC5DDE3381F41EEA25945FEA7E16E51968
-:10ED5000CA8F271D558B1C30CF92B4AAAF38A6F1AD
-:10ED6000EF901D8F9BA019C3F199A857D476B8AF27
-:10ED70006DB18CDE2EEAE7D991CAE583225179C5BF
-:10ED80004FF57B36117C0AF1CBDADD05246F557F18
-:10ED90004C83F043AD10FE9B15C27FB372BB91B99B
-:10EDA000E3FD55416DB941ACF74616E67EACFD502A
-:10EDB0001FEFB7A966212BD6A3FF069FFDDAFECD74
-:10EDC0002C385B41FA0E7C668C7FCF7AF97CEF148D
-:10EDD00074DF61E67E9B99EBF6C8DC19C5E79B5AA8
-:10EDE000E62D7810F5C49B7AF22FFC87A0938A1742
-:10EDF000A3A3EAEB88EF24DC8F61BB078D8497D354
-:10EE0000A08F0F0ABFC602DC67B6F9B30A0B113D2B
-:10EE1000B6BC05D6E1F8DDF492B91EF965B343A797
-:10EE2000E1A72A879ECAE4EF41BCB727935D0D682E
-:10EE30009E8A7C543156D5936C2AFA993ED483BD70
-:10EE400005E5A65B2D7E1C2F8C7601947708F9B51D
-:10EE5000C361A0F1D472741F27F805BE43E3A1DF9C
-:10EE6000C517C707C168FBADC25EE47261DBAA24A7
-:10EE7000924731BED531E2DB129F01FD452F0939A2
-:10EE8000F2122094F651FD662E47142E9F5E3A3BF7
-:10EE900089E4DE1B1FAF26B972695112334AD4DEF2
-:10EEA0002B61FDF3C6E07A28DF25FCA82F49DC0E94
-:10EEB0000C1CB1D2380D06FF0EF42B343C37DE03A8
-:10EEC00014632F1882DF7F1AEB5F3693DFAA218548
-:10EED000C3D9F0D21892933FD6079FF901F9218C3C
-:10EEE000649F3524B953A9FE27690CEBBB92FD83BF
-:10EEF00048CF6C23B71B1B0CA1223BE0F16490DBD5
-:10EF0000BF2751D0E0F88356B26B00CC2CFCFEA991
-:10EF1000EE4CCF26770C2FA71E9A4CFCBF4DCFE9A5
-:10EF20001638CCFD9A27F5BEB959503EF97CA90791
-:10EF3000768EECA2CF1032008CCD5BB8BDB64CE71C
-:10EF4000EE6B45D9F472B247B3DF7C78652DD637C6
-:10EF5000AF5E7713CAC1D1D633CAF3787FED0516F9
-:10EF6000C9A3FD66FDD8FE107CF7C2E0440FA94797
-:10EF7000E60262039FD878DBD37AC037F2D7113D1F
-:10EF8000F1EF171D1FE78BFB3FD42FF89D6690BF55
-:10EF9000513F32C9DFB8B23C5299D3B3F9A54C61A5
-:10EFA0009F69EBEF48F55F40B9D6F4DDDF9F682538
-:10EFB000FC4648FEB11EEE1F3FADF72E463EB5574C
-:10EFC000870C4BE3F6B78634BE8E9619855E6721B3
-:10EFD00043FCBA53EB2BAAB47CAE3EF5697C1F69A7
-:10EFE0001DE2727C78BD4EAC9BAF18516F71D70D8E
-:10EFF000ECA7CF727F8621CD4DF533CF860CCBA009
-:10F000009CBF2E6458219EB82E00DF2113CCFBF448
-:10F010000E2B5FCF80061C67C57446F6C80A19EC34
-:10F02000D0327CEF1E08035DCE3C6FE7FCF527C0B5
-:10F030000AE07B0913ED8C60B782DC7AB1530AA138
-:10F040005DBF64BB71AFB900D7B157B6223D774BF6
-:10F0500024B796745616ED80F2EA435388FE29D3FE
-:10F06000395FAE0EDA49FFCD147270993168203BDA
-:10F07000FA19EEA783F1C91E6E804E5965C3F1805F
-:10F08000F25BC30F416D9C6166BF90A7FBE3E20B8F
-:10F0900063E3E47A7F427FB0E3B4FC1150F50E974E
-:10F0A00073CC9D89724E95C34687AF348DE452610F
-:10F0B00026D217E8C9E5E44189F0DAC85AB8DE106B
-:10F0C000F23EFA5DA12FCEC801AE978C5BE93937CD
-:10F0D000AD80E8B61AF50DF9CDF9FE6E343E989B79
-:10F0E000A6137271643EB85EF041C35916BA16BEDB
-:10F0F000D7B08E851AA7F2A7752AE941AE0F4D2227
-:10F100009E61E2F18ECFD38B897A7098DE4BD077F7
-:10F110009906A1DF049DE3FDD9A8EF67AE0BCAE80D
-:10F12000D7CCB379AFCD4C8FD92FCDEF994CEEAB77
-:10F13000B0EC63632DE89FA97CC685FE5DD88FE3A4
-:10F14000BA4A06BCEC81F7BB55FBD6C5E7EB32707B
-:10F15000FED52B3E566A41BA0CD17E3592CE6CC894
-:10F160008F2A3E775BA15F19F6E3EB2DDADFC43A15
-:10F1700093E2FA57BD6426B97AE5B0356824BBC37B
-:10F180009F6F87F1327E65243BF4C24B56D29F17A6
-:10F1900084FE73AAFB7EB681E8D38A744D476EAABB
-:10F1A0001A83FE5326CD1F832250B5C31AEDA3F94F
-:10F1B000B3457DC1D0AD9CAF8CB45FBC620F7F13F3
-:10F1C000CB000F43FBBA05E98CFEF643B34B1F801F
-:10F1D000F7CD3E8B8763DF5F8AFC6A94EFBD15FD38
-:10F1E0002A73E57591FB601E8DB9169B11BA54E721
-:10F1F000FFFA97B741F9A3437A66443AEF9BBD887B
-:10F200008D1D5DFEAE0AEA4F86E3D6CB9AFDDA721B
-:10F2100063BFB6DCCC9493E13879FC589AD5796613
-:10F2200032C90ECF67C0DF4663CBD93D00AFF1C70F
-:10F2300046D2470D69FE5D69E837D5455E433C1B04
-:10F24000F3CF4D453F4555FE9F28AE73E5DBCC839C
-:10F25000705F315792FEBEB2C3EC0EC4C9AF66C137
-:10F26000FFBD79B554DFBBD3E896787DEDB40AB421
-:10F2700007E9DBF867D201FE9BB7CFFB88F64D6844
-:10F28000B543B917ED4BECF79C146C47FB713BD7BA
-:10F290007BE7C17E34A1FE14EBA9591E9C6B82FF53
-:10F2A000EC75D44C44F9A2FC59F121FD37E25071C0
-:10F2B000F6EEE1E8FAE47E9C1BD08F338EFC3887B3
-:10F2C000516E349AC2864A18E7BA3FFF8EE4F2CAFA
-:10F2D000D6A564D7C7EC5C23C99195F7F9E9FD2B56
-:10F2E0003BAEA7799D8179237ECEECE6FBB99539BB
-:10F2F0009620C2779D9DDBBF2BA19F240DC74B227B
-:10F300001E7EB3EB7A17D2FB378C7F2FD0CFED84E4
-:10F31000DFD8865248FEB85B52D0CE6BDE7EFD470A
-:10F3200028B756EE963DA8C7D9112BF93D56EE9E4B
-:10F330003371B905C7B99C568978EB9B6393E9BDD6
-:10F34000EC0B72FFC9D075F05EE9BBC68DEBE4F83B
-:10F350006E2387CF6E7A1AE1BFEECF32F1BDA26382
-:10F360007EB4577B0DDE89B8DEDCBBF6CD45BCFE36
-:10F37000A62E5B47ED9F95980DF1606FCDC0F72BE2
-:10F3800025C587EBAB7EFBAADA787BA4334D267CC0
-:10F3900057E6AFCB085B88DF6F453DD7B85B4F764C
-:10F3A000DDF1051FFCF236678CDF57CA3DB7CE8C06
-:10F3B000B3379A77DD28F8013436E069A5C0933178
-:10F3C0007F5D117EF7F3F87FE5FA96221E8FF9EB49
-:10F3D000EB20BABE77F1F5F007D0F7B45FCF7168D4
-:10F3E000ECFBD1F641AABFD9E461DE7D168A1B7A17
-:10F3F000719F9BE754A83ECFC9ED6CE50F6BF7BF3B
-:10F400000DF0F7A7F98D4E789FCFBCA5485777C46C
-:10F410005605E6244E89EC1FB6CBC8ED4985FBDDC9
-:10F42000B6A5B3A737C5C1998DE3A5D3FAB43961A1
-:10F43000DC0BEFFFE935C45F53DEB9A93C9EF63B18
-:10F440008A4F590679DCD2E2F131E48BE6C13A7693
-:10F4500057494C1E367BB8BC4E9CD77227DF6734A9
-:10F460003B23344E753A5F67AABF77676B12F9F595
-:10F47000763A8366BEBF0D3094E73795CB3CDE22EB
-:10F48000EC129FF09399BCAF308CC7308FEC190F02
-:10F49000E521EFA9CE3428BF5D3EC72343D9E27DE5
-:10F4A000B26B2CCEDBA317F5E3C85FF8D6AC4AB23B
-:10F4B0004F6EF2CAF45D569F42FBF521EFCF9D7768
-:10F4C000C1776F66DEB4D3F08D1A50D648C721FCE1
-:10F4D00036DA018ABFDC19E75FBDD1332FED74BC8A
-:10F4E000BEF472FD8FFBF17E113718090F25699567
-:10F4F0003311BFD77D99D3E1E367F9FEE36333F7B7
-:10F5000063ABED3EB6723D53EB94841DD89F87727A
-:10F510003E5AFE5AB1260EEC34F4E7E13AFBADA4B4
-:10F520001D6775978EE2B3ABBA18C5633FFEFE8BBD
-:10F5300079286F3FDAF762DED238F812FBA9CF5B89
-:10F540009D5ABF94EA87748AB8F4528F91FBFB46A8
-:10F55000F143AAEDD976BE1FBB08D21DF94EED7757
-:10F56000B13EC98B76E545662279B67450F835BD53
-:10F57000DE4227EE1FD4FE09E36F41FE01B8A4016D
-:10F5800089F6E7C9251192AFAB4CBED7C6B8312F6B
-:10F59000C54BF499877494905FBD069CB722F679A9
-:10F5A00046C5D788F45CDEA3A56396D326E2944EC5
-:10F5B000A2BBA1C9A2A07EC8E810F2FA1B3ADABF2A
-:10F5C00018B25D16944BD715257562DCDD9994321F
-:10F5D00015FDE6B9D9C5D43E50C5F93A90C1C86FFA
-:10F5E00095C55A2492B736EEE7CE99CE6C98E7F1DE
-:10F5F000A293DB832EE6D92E933DD82F91BF5FCC0B
-:10F600005F95EBC82F28E73E964CC42FD2A044F656
-:10F610009DACEB5F8CE38EC63FBD09FCD3FB0FE6D0
-:10F620009F3EF57BC3F8C74F71BAA52ED3C8FC2304
-:10F63000FCAA5FB8FD6871C26F98543FB384F3AD04
-:10F6400015E3D59A2C21792AC98773F1FED45D6020
-:10F6500067E27E448D2B8EE958E2E676FA5018F781
-:10F66000E5C9D79848CF7D47375480F67C629C1116
-:10F67000286B47798F3286FC8AAD55BED36971FA03
-:10F68000FE08DF3734DDE7A5F7B307B97E6F2E3408
-:10F6900090DDD93C200590CE4D3E43D0544071952D
-:10F6A00025A4B71F32BB799CC4DD4E71926FBB7924
-:10F6B0001C25EA470DF73D80FC566F21BF4362BC15
-:10F6C000E585BFC8FCFBE3197DBFB794C7777AE730
-:10F6D000B9C9AF911847635DDAF5ABC6512E5A012F
-:10F6E00031F0BDA59BCD44876C99E399A59AB87E6E
-:10F6F000192E07C85F9B315D1046C43BA2EB1A244C
-:10F700000396B345BD1A9FB196F80AD0C2BD3DED30
-:10F71000B93793D2FF967C86D6EFFCD57C8680B134
-:10F7200016F3194C683D8B7A041BF4AD5AF69ADD3A
-:10F7300018BF89D52B60379A0624F1BDE76F98531F
-:10F74000087890D4EFAFDFE4B550BC58F3BD78F83B
-:10F750009484F1F530BEC52DDA070ECC9BA3505C26
-:10F7600052D47FD68DF91B5BF4DAF108A5A23F16BF
-:10F77000D4EF1DCF9CFB9DCD3931BD0F7680297D07
-:10F780005A4CFF6FFCA0B6E72AF856B2EDB201F56D
-:10F79000AAAAC79B9D3CBF2171BD3AD2F97A05FB4D
-:10F7A000D5914E7283DBB5B5223E09F6EC5C5C5A0E
-:10F7B000CDEB7C0CE393602F64A4631EC3FBE7CE08
-:10F7C0001C45FA2DF898ECF9E64F15EE7701BB03CE
-:10F7D000ED7393E07336A0277DABF2C16A217F7A87
-:10F7E000EDA0EF915F8F48D302C4172D79B7000DBC
-:10F7F000EE4FF7BA697CB1EF4A8477463AF7933413
-:10F800001757ED28C2F19F9218EAFB4DC52733D058
-:10F810002E691EFC3063795CBF55038F121E56EDB6
-:10F82000D78F38FF19E9DCBE6C3AFC3CF9073F0E74
-:10F830004AB496EB9560F74C28D7D7EBD04263E5F6
-:10F84000C125B791BF7F91818D87F9E50B7DD4BC30
-:10F85000FF2B8199B83F837F12BCDAE95B417A6F55
-:10F86000E7229305E30ECDC54BEF263CD892BC882A
-:10F87000874DC55559F89DA6BAB9368A13807D853E
-:10F88000F54DF7DD4E7E1315AE4D03FA1AB4BB2AC3
-:10F89000C0CEFA11C09DEB985FE381F537463E5824
-:10F8A0007A8F05E3C223CBDF7FC9E0F4EC947C813F
-:10F8B0009BCBC94FC8E2FD7EF903DC9EAB4B37689A
-:10F8C000FCC275E9DCCE9C15189A8DBCF7B2124EBD
-:10F8D00046BBB799793FC1FD25F359DCFB884E5CE7
-:10F8E0008E38DBDCE43F3239C3DFB90AEB6729B479
-:10F8F0007F604AF811FCEE856EA7671313FC8BE559
-:10F90000FB4A822847FF39DDBF18F9AC42D88F1770
-:10F910000E5F5F8A7E36D53EEADE630E621CB0DB88
-:10F92000EAFE6E0DCAC13F283CEE6D8A0CCD467AC8
-:10F93000FCD141E3769B83DD48FFC0563DD51FB621
-:10F94000FA5721DF9CADAB29A2BC1B4BA008E3BC3E
-:10F950007A670F433B01B60BE44F30397D0CE3A1CE
-:10F96000B3034B1409E57C82DD315BE48F92F084B4
-:10F97000F755428C8D072E3863A225D0F9595ACC01
-:10F980000E79E34F0B157CA9DA273A138F67552FB1
-:10F990004A6232F2FD86C86B3AF45F3B87C87E6DDF
-:10F9A000EC97E83B8DC5CF513ED81A917714CDFF27
-:10F9B00051C2940FB53E3D59E8F14ECEEF6C88F63A
-:10F9C000CBEC00A7276361CA938AED23DAA99D3A9D
-:10F9D0009E41F8DD1B85DF053418D53F94AEDA076C
-:10F9E000EBC553CDEBE2DFDD260D7965C46BA9A431
-:10F9F000F117ABCFA7D2B97D987A2C3217D76FE425
-:10FA0000B09AA7C9F330774C9BE441D369589EE67E
-:10FA1000C02773916FC0D0A6F5DA34F0C5F234BFB9
-:10FA20002FF60DFFEB799A1EC9BB179E3F4AB7739D
-:10FA3000BF959AA7E9E1F853E36C89F99917B242A7
-:10FA40000ACFB70AF7ED43FE1C30521E57EDC0EB4C
-:10FA5000EFA17EAC35B17E8C4326DA196DB6AF0CC2
-:10FA600022DF5F3C7FA6EF418679BA2F78285F239B
-:10FA7000C17E48DC27ECC52659A3DB7BEF46E9C9EC
-:10FA8000EDBD68F97FDDDEE3F67C601FCF0F50E54A
-:10FA900079B3D89F5DACBF94827AE644149E843CCF
-:10FAA00086A7441EC3E0C8790C8AC807027B3D4084
-:10FAB0007C7290C775DE783A99E4C7259BB217ED42
-:10FAC000A5F3D6C83711598AB0933A8F18DD282F7D
-:10FAD00040DE91FC0E1CD4F3380DC66D308EF3F26F
-:10FAE0004411C711F1A29792C96E694871A7627F4C
-:10FAF000354EF363A16F1A92787CA62BD97F397D9E
-:10FB000084B8CD1E617FED81A16C38DE7B4611C7C4
-:10FB1000060181FB9D877279DC41C46D2E8AB8CDC8
-:10FB2000A9625DC8C0FD10E4A77277292C0BEADD3D
-:10FB3000EF99836EEECF32E940EF2F53E3362F7308
-:10FB40003FD532119F39B5602EE5072DC7FC7719D7
-:10FB5000FD18DCCF1CCDC767361DCE670D888B9D89
-:10FB600028620280F56BE0B5A493D09E707742992D
-:10FB70008C656F4F0D7C7769A78EF623CBBAB4FEE8
-:10FB8000F22B9BEEAE41FDBDB193C71F035D12E9A1
-:10FB9000EF65CCEB427B43E587828C34A273A053A4
-:10FBA000E7C5EFCCC8E0FE04407D90E6279E9D7A35
-:10FBB000E1671770B4335D089F3A893F37DA949A4A
-:10FBC00011F5B218AF53DF62AA443B3657477EDEC9
-:10FBD0002B06EF22F2933A8A886E9DD696AE1A5E75
-:10FBE0004F6BE58A39E2A3FA6B156EE831B703E58E
-:10FBF00064668688DF24CC77798FB69C187F581589
-:10FC0000D4969731FF842C3C87B05FFB3E3383CB87
-:10FC1000A92B9B0A849FDF437EFE4EBDFBDD029431
-:10FC200053DD0AC9C9F61C8E2F5D2E7F8EB5572F66
-:10FC300022FBC00E7605C1CBE11F7BAD53427DD9BF
-:10FC400069E77CF93F853B11DECA8C226E27A071E3
-:10FC500087EBA85B0A727C71B8BFA8BF626986F0A7
-:10FC60001708F9132DFFEFEF37393F76CB62BDD977
-:10FC700048FE2C15F1C65392E7E910BEB7805D002F
-:10FC8000702FEB96CBD03E99FD150BCDA3E9657394
-:10FC9000D008F58DEBC279B88E9AAAC2452D23E023
-:10FCA00015A15554B905ED963A617F80EBB64B1B13
-:10FCB000871A1E57F47E2B231DF721A70EBE8EF444
-:10FCC0003E6826BD04FF75D488FE8EC305642F4DA3
-:10FCD0004DF5B765A03E4F0AF57DAF00ED136E1FE1
-:10FCE000350E1AF7A0FDB7B4537B6E866DD6C6B934
-:10FCF000589783FC19AC57FB1ECFA768FA0D8B7B76
-:10FD0000713DBFCDE09F8876DD755FE6F1F5F3AB21
-:10FD1000740CE9BB4CF6AC403972DEACB5BBCF5BC2
-:10FD200039BDFAA274F614219DFB46A5B3A708E9D4
-:10FD3000BC4CC7FCF1E334229DAFC6EC734EE7F335
-:10FD4000CF5F5384743E77F09A22A4F3367D8F17E9
-:10FD5000D7CD930EFF5EC4CFE9393EB29BD4BCC968
-:10FD60002FCA8F8732B4FA305AFE3BF93F46D3830D
-:10FD7000A1281C5A3DE834B873501E2E3519FFAA2D
-:10FD80003EC4BF11FD692623F9235EFED3E58751EA
-:10FD9000BF050665B23FD4F15E56FCE3D05FF0F2DA
-:10FDA0007B2E4F401A7DFC066157B94C2C807E0F8C
-:10FDB000D5DE57EDC64479FC0B319FD319DE1AB45A
-:10FDC000B355FF6CBD18D314BCCCEDD3A724F2BF40
-:10FDD0009ADCFD3C7FFEC8121BFA67CF06B93FB61E
-:10FDE000E9F952F2D7AE0ABE12C2FC273628D97002
-:10FDF000DFB0EAA90F53309E0DFBD0531971F19576
-:10FE000039621F7A36782A05E3DEF0FD6AFC7EB29D
-:10FE1000336240FE6D82FD1934614D4A84CE0D354A
-:10FE20003919E9FBF201ED7E4D8D4FEEF41948DEF4
-:10FE3000ED1C9482B83FCB30F80B72503FB11CDB05
-:10FE400099E4D87AF924C36BCB9C161F17F65ECEC3
-:10FE500088CB570AEF48253E0CEB9997EC801D564E
-:10FE6000219778BCE63F77D9833C7F89B7FFCF6085
-:10FE70000195557DBD429CC35B21CEE1A1FC0E25C1
-:10FE8000C8EFF87234DEAC9E3703791E1A29FE1DC6
-:10FE900097B714DFBF8945447EDE6746CDB8D17C75
-:10FEA0009D965237C0BDE66B163A67D80C7CDD5A7A
-:10FEB00016E3C3063115950F9B845FB7B9FE24ED99
-:10FEC000039AF17C05DA551ECE870DB03FC2FCCDFA
-:10FED000C475CBFAB5F98CA3ADE329995ABD122D9F
-:10FEE000FF83FC98D333B5EB579DBFEA078FCE73E2
-:10FEF00050E2EB2B615E89FBCA44FFB5BA2FFCA22E
-:10FF000072EDE64CAD5C8B96FFC172ED8ECCD1E408
-:10FF10009A363EF037CBB5C4384121F77F639C0059
-:10FF2000E3B6FFD338C147EE9E0C1DCFC3D7C44FF5
-:10FF3000BBA4969B4CE330AEC8E3CB8D5623C56182
-:10FF400013E3AACDEEB9228E38F4CB19A8370FE906
-:10FF500019EAF37ACB4A8A5736CB070C78A4705843
-:10FF60003C51394A76FBDF1A575F9F198DAB1760FA
-:10FF70005CFD15CBE5347F1C3DAB4AC0C02F193D5D
-:10FF8000DF68B3A053B2C88B302901668FEB3F5AAC
-:10FF9000BFDE4C6E27BF22F2635C069EC7BEC50A59
-:10FFA000FB3098BF4BC7F377EE4FF76D43F968729C
-:10FFB00073FC3E71F8AB0CCF1D3DA1EF27391268E1
-:10FFC000B478501EAA7E17757C45F80FBE28DFFF57
-:10FFD0002081EF7FF077E6FB447C0CA872E76F8D01
-:10FFE000876D07DC68D607A3B8D75B18CF2918CE72
-:10FFF000C7A38D331A3FFF34D3F75A26C947EF54AE
-:020000022000DC
-:10000000CACBFD82F226B93C720AFD3BEC90D18D41
-:10001000FB0D933897C13667893C4A4F451DE51360
-:10002000F3730DEAF98FD1ECC20FA3729ADB851F2F
-:100030008E2AA7FF7B76E1030EDF299CE7E94A6F52
-:1000400011EACD8D56801FF77BDF378E78CE423D8B
-:100050000F00FCC4CF9B3CCBE3E0897CF58704FD1B
-:10006000F287BFB37E194D9EEA5D2A1C7F67795ADD
-:10007000FFC714F47B8E3E4E80E0A8A81AF28AB81F
-:1000800015C3B8913A8FE6219E7F9621F2AAD4F744
-:10009000116117DEE9F266BAA0FFB9F74D26960A9C
-:1000A0002610F218DA633E0BC5039AFA799E48D3FC
-:1000B0003A46715FF51C65D3401D43BBAF3FCD5F32
-:1000C0008079601B3FB004E454F4932F6068EF5DC7
-:1000D000789F971BD2FCE3294F6C5D581377A8F8E3
-:1000E000ECF206F46700BCE41F708AFC4C15BE3AC3
-:1000F000179767EAF32681EFE8BC9C1C4ED62F07C2
-:10010000D14E4C760F911FA9E91037DE2A642FF9E2
-:10011000EBD91A079D9F683A54594AE7CDFBCDA504
-:1001200068E756FCAAD686FE8973D73A29CF204FB6
-:100130000EAF423BEB9FD3FDB3105E6B79701EDABE
-:10014000A9F960A7A2DD7BEEE0BC527F9CBF7B1BC0
-:10015000FABB61DC6D56AD3F9B99789E78FD5E9E43
-:10016000077CD8EA9F8BF8DD66E6F006B68ABC67A6
-:10017000E1E74E5CFFEABA8F9E73BCC344716955D8
-:100180002E6CD3333FEA3D559E94883C39C007CF4F
-:10019000D31BACE3F91EA26C716AF3154F67CC292F
-:1001A00041784AD0D13B0DEF518848E8775F2EE285
-:1001B000F0D78B7C0A357FCAA8F8BE8EEDD9BA9AE3
-:1001C00058FC7D2CF617F177912793FC29B79FC730
-:1001D000DA0CC43756585FE41F01BE41FACC8A0CD2
-:1001E000CDC6F34485BDA15988CF973FD5113E9424
-:1001F000BAB7287E928A648371C66D0E774F403FEE
-:100200008AED17D7225DDC3DB62A445D7F9AAF9117
-:10021000E0505A8A715F59F5AF7A9E07782499FCAD
-:1002200003BD790D940778E103E388E746D467803E
-:10023000ADA7BCBFB1033F273FBEF59034623E6718
-:1002400097CBC2CF0D078628BF8CCD72123E942368
-:10025000BFA2B8AFD2AD9007A353EFD5E139A84004
-:100260003B23FFE5F85E9B0EE9922FF24B2EBEFC7E
-:100270005F53FDB44F51FDF6419E0FA40F6FC07D3B
-:1002800097D21EFE32AC60D678C8AE6B2AC1F1227E
-:100290004D3CAF3D99219FE40F8C5BFF2528E7770C
-:1002A000D99884F2E7A535F9E42F85798E1F619EF0
-:1002B00077BB78FE8E722459877A4BD9CA28FF50B3
-:1002C000B1675411DC8F4219C65923F8468D470295
-:1002D000B82ED44777BAFCBB11CFD17332AD49FCED
-:1002E0009C8C3877696DFDE0593C7FD267E0E70C64
-:1002F0008FBD3C7901F9EDBA1509E970C5BE24DF5F
-:1003000006EFF78B756B558698CD128FFF63946F50
-:1003100039F608CF4B53F49C4F946EE71EF40B7ED6
-:100320009AEAA7BCD26B3B4332C5B36CA71FA97135
-:10033000C7ED6BB6733DD2B49FEFA713F7319FA7FC
-:100340003F8EBAB47649B4FC0FB24BDE4AD01B7F65
-:10035000F3FE8469F77589F649E23E6E98DD9D30BB
-:10036000DE68768A9AD75115FB0EF1C32B56D50E4F
-:100370000A68F25EAA2CE2DC9B493BFE53224F47FF
-:10038000CD83C9E870B7635E79E4DB8CFC6C6A3EB0
-:100390004EA08AEF1B023A139D8773B11ECAC31980
-:1003A000C3429244F67F98CE7566623E0EF47BDFC0
-:1003B0003596E0DECD3C5D32C943B784709B318F0A
-:1003C00083F236833B56E0776EB1D077CC98C77115
-:1003D0003586E2BD3B507ECEAEE771886CD0B7C8A3
-:1003E000B7D9859C0FCD8B783E879AAFA1E657A8E9
-:1003F00078A812F8CD9EB0A200F707DD92FFFBEAC5
-:1004000079DAF873D2D1F3D1ABC6D27993E8F9B9DE
-:100410004226EABFD839E9447CAAF91D5536BF2DDA
-:100420002B7DF87959953FE2E84670ED3CC2EDF539
-:10043000AA7A03C17F71D57CF2235E5CA563B86E96
-:10044000AA068D9CDF12BEB7337A0F46D04CF75DFB
-:1004500008BA7F9EBD0AF42C463FEDB1B69AAB4F69
-:10046000036E8FB7F9E879D12CF5CB57D179C6C592
-:1004700028992E67EDACC57B0A2E5A237978CFC117
-:10048000E5EC076FA4727AE4049653761EBA11EF76
-:100490003DB8383ED287F71E14EEACE4F5C883D9D8
-:1004A0008C5D9555716380E6CDFD4EB363E7B3CBAC
-:1004B000113F8D2CBC6188FC3B3C7F1FF3FD900EEF
-:1004C0002E8B81EC1997C8B364D522EF12233050DC
-:1004D000EEC82AA578B585B90F0D617D0E3F2704BA
-:1004E000F5C4BF1DE3B95FD824E8CA72543F52383F
-:1004F00080F2A9A3C04EFDA372F49031C8FD59FC4F
-:10050000FBEF3C3F85E24B6AFE2863B6DC8553284F
-:10051000DF445356EF37608A2D17ED850EBDB04B83
-:1005200045392DD55F97156717BD33E75B25B80EA5
-:10053000CEBFF04021CAA5EB0D60B78F20877E9D0E
-:10054000CDE5D045BDA54B023BEDE729FEDB719C17
-:10055000F79217CFB5C3BC16A5551AEC086FE0FB90
-:1005600032CAC574416FFB420E9FBDDA272D8771D9
-:100570003BCCB07EA17FBA5FF1529EBD7FA1740BD0
-:10058000C0DD2171790B9D52695F52EC4EC5FCE5CF
-:1005900006715E5216EB7E46FF5619EDE977DB06D3
-:1005A000662A8531F87E2EE2CB3F2F6077D68DB05C
-:1005B000DF6DCDE2727B81EC9E827CB4411A78AB18
-:1005C000360BDFBBE9FD9C94D672CC3BBE3EB9A591
-:1005D0001CF5CFB0F7A9F0BE24AE6CE4ED1A4C9137
-:1005E0003C3C9FEC4DF6AFCBC2B8D0920F296EF9D0
-:1005F000CDEC774E60DEC13BFA9ED929A85F0AC4D4
-:10060000B97EE1377C6D82EA3734F1F264EE378CE3
-:10061000E6734DE1F964B50BF939C55A91AF30D79E
-:10062000C6CFF5CC2D2FF074008837B18882726F59
-:10063000EE7BBE14DCB7B385FE72DF94D1ED19E614
-:10064000D2BBE3D7EB3C775C19FEDD50AC2DDFE885
-:10065000D1966F9EFEE709F1E53DC9DE1D38EF1F1B
-:100660004B3CFF313083D9689E4E298076C7E41712
-:10067000B3C5F94E9EA7F74F625FF4E27446F519D1
-:10068000FB4D7B31FF5DF533CBA27EB28B99F21D22
-:10069000FCBE00D4571149E4FB392996C25EB8DB91
-:1006A000C6F1076D0D30CE0B4BDCB43E322C3AF662
-:1006B000655C43E526B2432AC69892906F8E09BEC8
-:1006C00053CFEBAA7C58A1301FE62FC0A717E2F347
-:1006D0001DBDED28FA97031F31C6E955A950FEA1AB
-:1006E000F81663ED547E4CF0F7310153E0DB0AADB0
-:1006F000E757AD06A2A7FC13790FEA098CCDA0DF5E
-:10070000F8D2E649049FBA7E6055173A33C8A52D42
-:10071000C655740844B1B02754FE460B08DB8DC1A2
-:10072000FF2C203E27791399C6EF4FF879019727C0
-:1007300091AD0E711E8CC7CB724DD171BD386E5606
-:10074000F43BFCBC51862843554807F3FE4D560147
-:1007500097CB83AFFF81F4B2C5E3C7EF18524C7457
-:100760004E465D37B6CEDFBE553B03E759F40D9AD2
-:10077000E77CAB0DE7590C6CBDC8414F6F1A8DC7B4
-:10078000D78F9CE471E33AF94ACDE1994A1CDF40E6
-:10079000FF46DE3F59DBDF05FD1D71FD53A07FC91C
-:1007A000F0FE4F594D21DD541CA7C21D26791EA213
-:1007B000C9CC17F3923378BFF9221FB43005DAA3FE
-:1007C000BE29D6E66BB0E91E13BFAF439B9F71BD38
-:1007D000B42E0BD7D53C53E36018C67B5DD0ED7AC1
-:1007E0009DFF77783FDDEB8B8B8EE37AAB31051580
-:1007F000DC0FDDC0421B9098172BFD4FD8C7913CF2
-:10080000F80BAE8B26D93FC101E5F3FA9EC2BB0BB4
-:1008100068BD7C96356D38BC2A5FA8F0227F209F8A
-:1008200045F92301EE289D6EEAA744B6DD60F7E0A6
-:1008300053B583186BE1F9C6EEDCD8BC8089E69A23
-:100840005A0AD10E79BD3D4072E37AFB2394D7F466
-:10085000E7317E6736C0B5E8AA4FE85E13E65A3244
-:1008600001ED7B80373D3BFDFF1DBCAABD372CDF72
-:10087000F6238326DF76B475A57EB799F1FB69660A
-:100880000FEEA1FCD9E685160F9E8368C6FCCF72D9
-:100890008A2F911D87E784E99E13C924ECAE2F9A15
-:1008A00097CBD7616FA39BECB7A81C1779E5BDA5C3
-:1008B0001CEEDEBBDDEA3D27DCBE5BC2F83D29EA6B
-:1008C0003D27CB6D54AFE69FF7EEE17EBCDEE72718
-:1008D000D07929B0DFC85E60A93A0E5F81F67E1537
-:1008E000FC933262F9D2DBF4DCDEDCA9F354209E07
-:1008F00077621CE8AFC47FBF9AADF59BA8E544BF03
-:10090000DE930EFFEDC817CB4BBC7912F0CF32034C
-:10091000F7DB017FEDC2B31535ACE529BC3F701E96
-:100920006BF9856E1CF1979FF86BF227FC5EC1187E
-:100930007F2DE1FC1520A1A4F25794AF8A13F3ABED
-:10094000FCABB17DAFBDFF574D68A70E1A892E6A6B
-:100950009E5CE23A8E83E7B49EC3E394658267EDC2
-:1009600048F07C113E8FE7AF4CC6F979347ECF5406
-:1009700058C05A16E3F73DC9FE76843FCAF71BF804
-:100980007E6418DCB285F8E3D6DB649E3F9ECCF52E
-:1009900015C62BB2E0FB75E2FBB776733EBAD56A9B
-:1009A00020BEAB1B6CA47C2256CDE30E1EF81FDFCD
-:1009B000077A09BF8B44BF85CE523DB2ECC25A6D57
-:1009C0007C6291458D7FF8F4B81E6F5DA83F19AF2A
-:1009D000EF17B1CD9F60DEDB228C63A8FDE0BB8FFB
-:1009E0006747E31813308E715CECD32F027F23FF2F
-:1009F000BF9ABE72D7DDC0B7131E2F29437FCE9C8E
-:100A00008C554F6D85F2F7764EA2F2AB1977DCFB71
-:100A10000ED6F71551B91A2F71C1FD4623EF5F5C51
-:100A200071DBFC02F8EE71B31817D715EEFB92FCE0
-:100A3000BD75D0CE35756C19E623560BF970F16E85
-:100A40009E0F7FC355569EE2B9D24D7EA3EA245134
-:100A5000FF753EEE5BA5FF568679A9D563238BE92A
-:100A60003EC6B21F4FC2F271E993C523C54D26178A
-:100A70004BA189809F6A076F5F5BF6FD6CDCC757EF
-:100A800057F1F2644F65F738ACD75D5A3CD2B9D014
-:100A90009F8AF5143DF724D6E98BDE0FE99C93CFAE
-:100AA0002479708ABEE91FF27B892C920DFD8F3E5E
-:100AB0006F81827ED2D95E9EB758656ACFC2FDEF44
-:100AC0004D7E4339E69FDA4CA5C7D1CE489D5E39AD
-:100AD0000DE93BDBC4F4A89780CFFF85F8FC9A4F63
-:100AE000F25290B92C5A3E57F9A84EE5EF6A2D1FE5
-:100AF000C3FAFCD7ECF4CF97AFA3F1317CFFDFB1A1
-:100B0000FFA22F69F54A74BC84F59638FE6872001E
-:100B1000FFE2E55C0C8E7E5A57399815360ED75D8C
-:100B20008FBAEE220887413744E73EF225CF243AB8
-:100B3000F0388AFE57E1CB05D9C6CA86C3857F8ABD
-:100B40006A9771086CB60CFC2EAF877E5EE688C192
-:100B500005DF676350EF6FE0F0EC965AB8DC107673
-:100B6000B1BA3F6E52E73BA09D6F45123FEFEC429A
-:100B7000FF05F673964EFA6B70370BBDB9D0E47B68
-:100B8000C80873B8C5BE8CF8E1AB2CF03CDA27C6B8
-:100B900054BF634C3AEEBB0247C205E4CFA5BC018B
-:100BA000A077DA9838FB44852B111F4DA3C8C344A6
-:100BB000B813F110A3CF10D957EAF9A9E8BC12E68F
-:100BC000D361E5EB3532CDA8DE5F528CEBE26D6987
-:100BD0009227DE9E7E3B416F27C2A5DA11AA5E55A1
-:100BE000E1417F11FF7EA41DCF90DD38662CD99D99
-:100BF0002ADF640AB80C3A69C438EA8D6374AA7FA4
-:100C00004E43C7C4734E2ABED4BCA0443CA9793D10
-:100C1000C3E23509F1C8D1DA49603F8F710CC79F33
-:100C20001AEF7144FD5C029FA512C93F87F073CD96
-:100C3000F6F0F309B5ADFC9C7C6D0D4C0070FFB671
-:100C4000F01FA8787EC8EEBF8DF347781AEED3BFA9
-:100C50003BEF698A73A8F7C825E267F928F8198D70
-:100C6000CF47833F2DD5B712BF7B5E1AAAC0CA2DCE
-:100C7000E9E2FE41E62FC07560B71554A21F02E4F9
-:100C8000EA679FE1660EAB80AEE50E7F33F2F9575F
-:100C9000996F0ED2D751E3D773FF3A23FFED5AB1C4
-:100CA000DF9A23F4EDA55D32C507AABD131F9B850E
-:100CB00076E21B7A16A4F5EE25FDB946C07F099FA2
-:100CC000D8DEC2F5EECA377F54012B864DD8AE8BE5
-:100CD000DDAF00FF26069334F72B4CDEEFD094A750
-:100CE000F4676BDA5F353056535F1A9AA4A9BFFADE
-:100CF0008D324D79DAD04C4DFB6BDEABD2946784EC
-:100D0000E76BDA7FE9EC024DF9DAC8ED9AF6A7C491
-:100D1000BE9805BC43C51978BF389FEF759F2ED587
-:100D2000F4FB6DCADC37900FEFDACCF3972B01336D
-:100D30009A7B267AB85DD102FFE374F52988AF1556
-:100D4000606F63DEF2CAED5ABBA37E70EB0694A51A
-:100D5000897915AB594B155E49979857516D5BA230
-:100D600043BEFBA731C2EEB8865D23EE85F9AB74B6
-:100D70002D62E3FF5B7435BAB47435BBB5744D2E88
-:100D8000D6D2D5EAD1D23575BA96AE76AF96AE69DF
-:100D9000355ABAA6FBB474CD5CA4A56B965F4BD74D
-:100DA00031F55ABAE6B668E99ADFAAA55F4160B59F
-:100DB000965E09F456E5E5B8AEB59A7651BAFBEA07
-:100DC000291F667CCFFD9A7155BA07E07F9CEE2DF6
-:100DD00094AFFEB7D29DB120F95F13E97E3681DE74
-:100DE000A0AF3E42B90076C6397C2E9A20EC79DF5E
-:100DF000C876862A7FE2F57AFCBE7534B9344C8F0A
-:100E0000897DECA87A2C611FFB3E66F1907DB49938
-:100E1000FC3CB709FEBC8CAF66A01FF507A49FDFA2
-:100E20000740A6035CEF23DCF09DF79326939FE138
-:100E30000E16D2D3BDBF98890883DE8989C932DEF8
-:100E4000E7E3A6E732A1BF970B3F8437D99F92C350
-:100E5000FD0FF919F8DD9C217EFFF25B695FE89ECA
-:100E60008293E887079D721AFDF0F0BC60E6FC7083
-:100E700046950F5EE676C6E16DE96C89F4323A7C00
-:100E8000703FBBF4AB12C51996FE9E3FC7E770BB1F
-:100E900037F1D9D1AAE28DEF876EC87193FECD618B
-:100EA000FDC27E637ECB381A87FBCD9FE4F78F3E71
-:100EB0002B3165BA838E49111D334D1CAE67F5CCBD
-:100EC00084F87B86F9DD8897EF28209A789EFE24A7
-:100ED000E487A5BF7F672CFAB164D97513DE2F3D77
-:100EE0001DBF0770CCF95A8B847EDD4C578B847EF6
-:100EF000A361EF0FDD2FE1F9C26899F176F88778E9
-:100F000050FD73C53A1EA78EDCCDF7174F7D9D911E
-:100F1000DFA9A3355019C0F8940C0607E6B1E8F92B
-:100F200079E41B72B8DF2D8B0DD1BDA6EC356117AE
-:100F30008AFBE04B44DEFB0511E759B1C7C4304FD3
-:100F4000A2E4E05107C67556002D87509F297EBA4E
-:100F50005FA364C7AB0E7ECFB8DE8EE7D8543D3AB0
-:100F60003ABD1576262E7F1CE8D832921E5F93CBB1
-:100F7000E3B31D6D35B3302EA3C2F3609B7716F239
-:100F800087AC7818C693F0DE9DF8FC338313EAE350
-:100F9000D6AF62A9D194F5161F5D66B1A1AD85F8F3
-:100FA0004C2FEE07DA98B3D616FFBB01AB7374E291
-:100FB0001EF200433B9B8B7A7C2A67503EFC91F1EA
-:100FC0007DA8D105E3C4CBB57BF358BC5FB9ABCDED
-:100FD00047F06E90FC7E1CC458C842E614CC5BC03F
-:100FE000B397F07EC7F56F601E8DC1BAD613728FAE
-:100FF0008E37A34BB9122F971EC801B9941C934B7F
-:10100000DF6D3B4B78EA685B44DF037C318C9F05E6
-:10101000B2B87DDAD1B684DEEBC0CE427E7A65C747
-:1010200084A36EA83F01FFF09E1CA393C3C5CAF31F
-:10103000483F2D167C803EAB5CE09F13AD7AE2B357
-:101040007B722D415C84F7BC3DFE28DEF369005EB7
-:1010500092FF06B8A3DF11783208B904FCE4C3F5A7
-:1010600066C856C8FFEBB02D203AFD77C753F16B29
-:101070003033BA87C6906B21BFCD1785F37B390912
-:101080007ABE3C8FE4E83D022FAFECE0794727EED3
-:101090006564BFDE731FF7BFDDD3C828FF9BB5C2F1
-:1010A0005F458C6F54799D8E3781C0CB9E3610344E
-:1010B000458C3DDC66C293572C19FD64E36274ECE9
-:1010C000F12A7674C76FAD76D6E1F3E1E9A77B50DC
-:1010D000AC6C99F5BB217CA28F1BBF6F6B6141B4D7
-:1010E0003329160BDFB7D74319BE9F22EA53FCBC46
-:1010F0009C2AEA5317F172AEF739A91A014B88837B
-:10110000E45A1CF30A51EEDDC5F8B95B71EE7EB707
-:1011100090BB632C8EBA6AACFF1AA37C7CB5FE71BF
-:10112000519F6539D9350EE5F2426DFF1D020F99C9
-:1011300096933DB3295EA2AD57E31BE9964B6F50E2
-:10114000FF126DFDA3A2BFD572696836D6176ABFBC
-:10115000FF90A84FB67079C87CFCFE54B5FE3BA248
-:10116000DE8CF5F87D8FB6BE5B7CBF430A127DE84E
-:101170008E585C3FE9DC5FDAD7C6AEC5F5D3D3162F
-:10118000A175F470DBA7442709992C3DB6AE6CAD70
-:101190006CC4F3E092906729EEB0D73B82BC53EB6E
-:1011A0001D367EDE5D7619888F8C16212FC43A8C11
-:1011B000CA0BA9C5C3998BFBB13F8F9F61815D416C
-:1011C000FB220FFE909F73EED5317F9CDCCA6E48E8
-:1011D00062FEB8F6AEBB1C9A72C6D7B235ED9D0B57
-:1011E000C76AEA2DE59334F5CC9B4BEB65ADE0ABDC
-:1011F000A492324DBD7A0E9FF5E46AEC677DE14C16
-:101200004DBB4BC56EFAFD9033F3D4DF19F1985006
-:101210002EACB58ECD44BDF34CDB7434B2D9B3B033
-:101220009EF0E8D4013BCF2F3E807159B4D7DBBC90
-:10123000F47E1FD483E5C29E84F5E686F67BDA6CE5
-:10124000547EA2CD45CFDD6D6E7A3EDE564CF53B29
-:10125000DA3C547E0CC6C7E7A3300EBE7FA4AD8631
-:10126000CA5BDB7C54DED2B688CA0FB5F9E9F99DBA
-:10127000B67A7ADFDDD642E58D6DADF47CB02D40D7
-:10128000CF8EB62EAABF46D0FB8038C778A0929FDB
-:101290004B4EA4E3AC5C49732F9835963F302B1727
-:1012A000F307FAC39AFBDD71DE349E99CF3F71BC20
-:1012B0003A1C0FBE3B890DB527F3754C71C7F1037E
-:1012C0009EF5C9C0EF635A381D0A0622549F55CFB8
-:1012D000695127E065CE00CBA9E0C750B1DD0569B3
-:1012E000A82A99C76129BF8CB9609E15E27E1C624D
-:1012F000BBA00EE152A673BDA9D2353A6F3B87134E
-:10130000E73F12BC5F13F397CBFBF9FD17353D2187
-:1013100064FB246F0BDD7F615AE40BE1EF57387DEE
-:101320007E3A8F3FE9D3B9B0B90139F3E997991BF8
-:101330009E390DDA7D4FF65D659AFD85FCE9C3CCDB
-:101340007D358C5BA2DD9F2415AED5F433E5DCAF93
-:10135000A93738D76BEA97AE29D8E0427C8E611462
-:101360009F316E6E6718525CDEBB95E0DA24F07E2A
-:101370004172D379DEC041353ECFEDF3EF09BDC2F6
-:101380004C9B693D4CB0F362516A40877AE1DC8F37
-:1013900052491E3DFD842E88FED7892CA8C3F53FF7
-:1013A00019CC3DAC9F8237E8CA74A58A8CE552E619
-:1013B00096B17C358BD0FE04ECF3F5B9DC3E7FC2F0
-:1013C0008CF1C15CFFF778DE5288F46691A06791DA
-:1013D000BA1FD9AE24FA65BB72890FB5E7993A8571
-:1013E0009DDE6EAFC8C4B8E88551F2CAACAE993381
-:1013F000F177B4AC59D3E9A9BE7FC8AD1BF19CEE1F
-:10140000E3025F2ADF4F0426177CFF38CEE37CF926
-:10141000BB19B8DD6B2A8C10FF5F90BCAE2588D756
-:101420003765CE878359342F45E0553958E95A023C
-:10143000F853DE1EE709B0D8779E6EF3CE54945869
-:10144000B948E445EE6FAB9B591DF7FE75014F316E
-:101450001BAA41FD545CA2F304696497467E990B74
-:101460007BBC78CE5C29631E146F1359CF7AD4D518
-:10147000CA5F64CA73518ECD606ED817582C21860E
-:101480007941AF47E7C934BFAFF43B5B752ADD173D
-:10149000981D957BA813F1F79486907F7ED7ABE7D4
-:1014A000F33AA6AD2FB6F0FC9D15C586A05BC2B081
-:1014B0007A0FDD8BA7F4490C4D7FE52FB3090FECB4
-:1014C0008564E2BFE4ED53E94AED9B14FF0F91BE42
-:1014D000E743EE1774E3042F42BBC6C986BD688F8D
-:1014E0004D40BCE0840A8B09AFCBC57CF7B72D21FA
-:1014F0003CFD5ACCA33337011EE6F1E2BD912B7AB5
-:1015000055FF87769E0F9557DD8CF7EC750CC9C299
-:1015100056D2E273937E682AFE36DDF930C0251379
-:101520009CBF46FACBDB2BE8F7954081D0FC1A9F95
-:1015300080FD7E01C9A31AD2DBD374949F9AC85749
-:10154000A7841C6BC9E5797F56D79767E2EFBCC5C6
-:10155000CAB3883F9FD1B162CA2FD1F1FDA59ABF0E
-:101560000186831BF775A579BAE83D1AF3515FDB55
-:101570007594F727EF49A2F389B25DA13CE34E4B86
-:10158000B56D358E635328AE32579E358476B3D110
-:10159000AEBB1AEDEEE37BEF1FC2FC12395761E8D8
-:1015A0002FEAB429DCEEC8D1513E9662AF36611CF9
-:1015B000A6C872BA12F17974CF37C9BF217F43E44C
-:1015C00088087F925E90AC93B5D0F8811C45DCE72B
-:1015D000E1AD2DCD10210437EE7F6A3E423FCA7146
-:1015E000DB2533DA2B6ECB0AF2A715E615D07CF497
-:1015F000186F83F213EB2ED9516EBDB96783A30028
-:10160000EDE7A0423648F19F3BB2E9DCF91E039DAD
-:101610008B57F19A1F503471BBDC566DD99810BFAF
-:10162000D3279C4BCACA2B107A6E110BC5CD47EF3E
-:10163000E2FB35E6B4D07EA7304F629FE962E53128
-:10164000A2BC5F1FC8F6007E8EED59918FF3BA726F
-:10165000D84F79BEA3D9FB1FE7BAD5DF4332EBE8F9
-:101660007ED59019F37E9F6A63E968DF99820AE567
-:101670005DEF13F2ACD0C2F9DF90CFF93CF159D84D
-:10168000C3D79D722029988C74B3F59705804F2697
-:10169000BF328FB941FF15DABCE43F2C6C35A4632F
-:1016A000FEC0DC1F5A884F2E5992C84FA8B4267925
-:1016B000F07DC7DE8A62771CDCC1365B3AE6E5EC7A
-:1016C0006D33A5A39C0A8E225FC7D97594AFECD663
-:1016D000F17CBAF9791CAEF979FCBE9779A2FCA429
-:1016E000125880703E09F4C43CE9A39BB93DBCB6D6
-:1016F000DD4470AC7D731CD955A3E1EDE936573A52
-:10170000DE0FBF77B32E1BFD4795DD859BF09E84D2
-:10171000B5567E4FAC9C3AE9314C45673FD533B462
-:10172000DF3B52667A96C5C97739755631F2952CEA
-:1017300007B2D12F7267DEFC9B315F12E8B713CB83
-:101740002BFB4A79D91AC8C6FCCAE6BE69BC9C1EE6
-:10175000D889F995DFEA9BC1CBB9816CFC1DA9B68C
-:10176000BE6B79797C60279637F655F232FA9E4047
-:10177000766EE99B7333CAD90E83A71E05F20F005C
-:10178000FE1280BF5F3CB70ABCA8F5CFE17BC0F377
-:1017900021F14CAC7F41F41B18A5FE25513F38CAFE
-:1017A000F82F8B7EA151FA1F13FD8E8FD2FF35D1FA
-:1017B000EF8D51EA7F22EADF1A65FC9F897E43A301
-:1017C000F47F57F4FBC528FD7F29FABD374AFD0792
-:1017D000A2FED709E39F10EDC3E2FD58EBE60F42EE
-:1017E000C07763418EA05C2AB66E76E03ADFDB55A7
-:1017F0004EFCDF51C1E33B2ABF8FC5DF6F827A5DAC
-:101800003EBF4F4A97CFE33CCF88F1810FB720DF2F
-:10181000AD7D5BA63C9B0E9DE76C10E5E8261DD9CF
-:10182000036BDFE4FBF3B5DD4A30FEFCC53309F0A2
-:101830006F10F0750A789FCCE3F139A3CB955E1B4E
-:10184000EF47B269CB9896857217E437E5ED1677C6
-:1018500057751597638C4C471688D2680AE17D0D41
-:101860008A55E8055B794F31C26751E89CBA6257E7
-:1018700042FBB1BFAB9CEC3B15BE4E8B42F775C92A
-:1018800056AE07E6FE70960DEDAC4EE61FF2627F97
-:101890009742F6FBD1AE321BCA3D83F52E1BAEDF5D
-:1018A00076379F5775537112CA6BF9211DC9EFE343
-:1018B00036BEDEFB5C3AF25B805EA1F32C20AF3DCE
-:1018C000A82326B0503B9D8F78F88525DCAFC7ACA8
-:1018D000A515745E448D434B4A9CFD7F59E0275FFC
-:1018E000E81105F50B3C9F2C17E71C02DCFF046494
-:1018F000738D893BAF79394FE6E740D438A25C4B12
-:10190000F716E5AD5334FEF79C7BB5654382DE5098
-:1019100012F4CAB82E9093717AA72060D3944FE640
-:1019200009BF8E8779D07E9DFBC3CD240F2FA17E6A
-:101930009346977B51F92BE4F193E21E9E2703FC1B
-:101940001CF1D1CD653F417AAFEDD6D1BDD35F5407
-:101950008E3E93C7B87FDA0F7A07ED198565E37E6F
-:10196000E9F3F0305EEF73D0BD0A9F838FF18F965D
-:101970003B50DE8EF72BA47786E98DCFC1D7B3928B
-:10198000E73D3FD2D19EC4ED6A1B9F77678693DF08
-:101990004724CE1FCAC25E7B50F8C195D4B96EFCF5
-:1019A00089904E7B0B9537489ECC1BA0FD46C96F96
-:1019B000C3F21B8E24AE777293880FF7A32D43F7E3
-:1019C0001C16F8D03FD21F34A8F71486F0FF0E6221
-:1019D0007E8E7A0FA28BEC33710F63EFCDD5D85E7C
-:1019E000B14D469373DA138F6DD1830D7AD0C0A2B7
-:1019F000EDF13CD533C775E29EC4DD5BD05E3D980A
-:101A0000C434F7401E443F3A8D17DC82F73EC2F7DC
-:101A10006E90610F767DFEF7B658B262F054B90F42
-:101A20006C69A73C59BE2FB1337E4FF779773805E3
-:101A3000970BEC4FAECAC77DF99ED3199ADF5D13A1
-:101A4000ED5345FBA6C148D30137B59F960FEBA0D8
-:101A50007120925242EB2B5211DF3E45ECF7E3DA54
-:101A60007F89C61FA57DB10ACF81776F2DE1ED2B50
-:101A700071FC0BEE7006E5BC24C093367CFCEBFFDA
-:101A80001A3C9344FBF3A177A9FD0516CE9852406A
-:101A9000FD6EC27E17DF7AB742CC3B03ED64908ABD
-:101AA00037E37B34B7F8EFB1B490FDDC6FEAB1A156
-:101AB000BD66D6F7F850EE16E2BD4ED363CF05F9FA
-:101AC00085DCAE4A78DF6F6269B5C88FAD3ADABFA0
-:101AD000F49B86CA4AD09E7ED102320FF5C23A0FDD
-:101AE000CAC181F05A4F09B4EBCB9945FB8A838672
-:101AF000967E3ADFBBC442E74FFB6C3D365C3F66E7
-:101B00007B8F0DE308F27DDC7E52965AFC4F213F1D
-:101B100085D6162F8F5BBF556E3DC1DFFDAA65339D
-:101B2000EE03BAF59E9E0968675B15CA3F57960E8D
-:101B3000CEA7F3823FD03192EF30AF2A287736EA32
-:101B4000E8BEFA87DD4BEF413C30C5E7AB827E79DA
-:101B5000E98A84E72F1E547C268C5F1885DDD6E742
-:101B6000E1BFF7AA7E7787B02F77E4F37BABBA9714
-:101B70001C287E0DFAF5B5AEEDC7EF99279A18E649
-:101B800099F5E59CE9C6F3A28FBB60C70B78B0342A
-:101B9000E8E8F75A1EAF8536A9E8CF3068FC15CFC4
-:101BA0004AFDD43ED0A8A37D82A5C4A0F16FA43580
-:101BB000E8BCE8773CE0F66F427EBBFA6DE506FCD8
-:101BC0009E6BBC6243FDF490EB17261DC09952AE8C
-:101BD0001DD7364B3B8EA35A5BEFACD5D6672CD4C2
-:101BE000D6BBBE6648F0D768CB29C8478847900166
-:101BF00016D04349BC8A2559AED0EF8575FB77F5E1
-:101C00004C8036C6E440E96B006FD2A424DAEF6F53
-:101C10007C3509171FC81F467267E3144679AFC7A2
-:101C200072BFE9427D9A889FBE1C03CDD75208F847
-:101C30002CC0FDFA59FA5D2F0B8B6B5780F8F13EE3
-:101C400093CFF7EFCC5581FE394672F059D57F7CA2
-:101C50000B3F4FD5D7CAFDD20F2DE2798134830ACD
-:101C60005CDFBC7D0AFECED854F4DB77DD8DF98EC7
-:101C70008978CDC4FC3239C61F1BD4F32B787AB2D5
-:101C8000828B655C7797DCFCFECD9705DF1C14F733
-:101C90002D44DB23FE3218DFCAC2786FE6ABFE07A5
-:101CA0007E1E609B1A8F1165BCC610CB078F3B6EE2
-:101CB000C0F5B46DA1A30CD7D3466197A5E618BCB7
-:101CC0001301DE47DE3004A4ABA0ACB0E37AD0E76A
-:101CD000071DFCBB86379302789EEA1157399DCFCA
-:101CE000FA389FFBF39EABF4FCBC96D6A342E7DF29
-:101CF0001E717ACC65DCDEC0BBAE19A51681697198
-:101D0000B4B68CF6A98F783D665CAF8FE478CC983A
-:101D10009F6CCE526CB88E1D2E85EED17AC4E4B77E
-:101D2000A1DDE2000588BF1F67C8ED9947E7920073
-:101D300087BA0A1E1260228F0FF3E8D204BEFA5C43
-:101D400077D9F0FCBAB3F0D0B7D0AF9E86E3A5F058
-:101D50007E8827BBC0D3A57C37CF4B16E3A7DDF524
-:101D60001CB5C7BFCE8AB8F13C9CBF0CF358907E1F
-:101D7000074D7C5F1D273A3EF392DF7EC34F38DE6E
-:101D8000DA73F9FD4186358CF661CF55FAF71F45B8
-:101D9000FC6425D13E3BDB955D85FC91FDC6CE05FF
-:101DA000780E61C34FB8FE342CE7F1A66C8599BE5E
-:101DB0008CF34EF7DB108F89EB30EB784F1D32DB65
-:101DC000FF054658D4C60080000000001F8B0800A5
-:101DD00000000000000BD57D0B7C94C5D5F73C7B43
-:101DE000CB26D9249B0B212124ECE646201736E193
-:101DF0002222EA7209A222DDC81D233E210102240B
-:101E00001040FB46CB6B161214156BA8A86851370F
-:101E10000A142B6AA88058D177B968A95A4DABBE6D
-:101E2000A55A692254416E31B4EF4B5B3FFBCDFFA5
-:101E3000CC4CB2CF9228EDFBF6F7FBBEF86B87795E
-:101E4000E676E69C3367CE9C7366765702BBCDE799
-:101E5000602C61A28DB9EC8CFEFECEFF976A61EB1F
-:101E6000CD098C254DE1DFF342BEA7248DCF2D6235
-:101E70002C79BAB17E0A0BC9BB79BD239D77B058C6
-:101E8000C6065419EB3D197DAC9899900BF96EFE7E
-:101E9000EE7C93D67EDFE0118CF9532D9E6D2EC61D
-:101EA000D2C3C663EC9B08E4356672FD3D8BB1F18D
-:101EB000AE78C6FAE17B9DCB57C8D82E9B738223A0
-:101EC00089B1CE15CCF30C6F3FFE950D73DFE1F9B0
-:101ED000FF4A77382378ADB423CD6D05FC3BDBA7F3
-:101EE0000F46FD2D16FDE9685EBEE5687FE6D71852
-:101EF0008B886675AD1C4F3613D391FE1D7FD7625C
-:101F00001C2B8D33DEC527359231DE45C094F2CFD0
-:101F1000A7AD0307E63B3DE8CFDD66E7FDB65A9C7B
-:101F2000F9169E1FF9F4630F59D3310F0EE3189A77
-:101F3000B6978D66ECF9C37CDC013CE77FF2A189A2
-:101F4000165E1ED55DEE47F92E9349E4FD81872686
-:101F50008E656CE0E1D6350E2763654FEF78C8CE0D
-:101F6000F116F92B51EEE379BF0578A919D4CEE724
-:101F700077306309CDBFF177112C82D72B347B36B4
-:101F800023CF3E8964DB787EC79EB1B35DBC5E63C0
-:101F9000CC28975EC0D8349746F32F43DAEFD27936
-:101FA000996D1EDDE3B8F4FB8D126F8C798EB670DF
-:101FB000FA163E6B63F7F3C23CC00D7AB544069E39
-:101FC000017D9B1FE34CC7589553D0BC6AEFFD19A8
-:101FD0000778FA6A4C59A58BB7AF8A99980C78D2D2
-:101FE0002E32A62772BA35D899CE719596F4338DD4
-:101FF00071F806261D1EC71CE09BB6354EA4755110
-:102000004C0FE1CBB48B16A60F477F5EEA0F7FF62D
-:102010006470A1F86B4AD0D91A0E8F9FE37A1BB86F
-:10202000D319D5A11581F1277ADBD5FAC8049FB25F
-:10203000D9AD05E03A81071BC7A9B584A70E4B307F
-:10204000A297FA77C87A66BB23681EC653E75B4738
-:10205000A95F87E54CBBBDA79E3D60217CB01A16E9
-:10206000C8D1084FFE08E4E31228CFBC5E575232B5
-:10207000F89F1172D32CEC70041F97B897AF9F5440
-:1020800016A4F4498E1E47162AA5C77F1ECDF089D7
-:10209000818F9F616C72285FABD434C844F065D7E0
-:1020A0009BFA9DE0F8C93F14497058D6B340241FED
-:1020B0002C1BF4E074CBDEC0021637EAD9FA9D4837
-:1020C000443B97E403A789D178AD43B1AE36BFE571
-:1020D000D8C0E288BE24773647B16AE04B8DC7D8B6
-:1020E0001AE28780E48B2D0D4EA2A32A1F5873306D
-:1020F0008C8E09063AAA7A691707103D7BFA0D50B3
-:102100007F69F5BB891FD22E66483E717D47FF99D6
-:102110007DF49F42EDFBEE7F208DFF64F0C3F8A9B4
-:102120001C153FEEDC1DEFE369A4B5D9E7E905CF47
-:1021300069B71BE5E4B07D46B9ABF01269F52695A9
-:1021400071FC47DE61F2B4F0FEAE386AAC37D9FDFF
-:10215000513CD6634FFD60D234D4AF15F5AF3A6928
-:10216000ACEF1BB727ACBE80EFDA8BC67AE1F4097F
-:102170008797C3D56F46085C13EC1186F6B32B2EF8
-:1021800081ABDFAC10B8AE4B31D6D7D7F40ED78DBC
-:102190007911DF0A97AAF7BDD197572F7C1ED32656
-:1021A00047F48177517FD6ECCBEBF796EA6FAF77A8
-:1021B0005B7DF8387EB95FF1B5C5D77122FEC19756
-:1021C0004062BDC91BC9F75127EB6458475D725D7A
-:1021D000253027AD67BEF035ACAB0FF0CF54C686C7
-:1021E000B87D5F437E4DB07BCB1FE15527CAFD8A8A
-:1021F0004DE13D5E89CE7D8537175ECA7F8CAD256A
-:10220000B85ED3749DD13E6BF76CE3EB3B3F8DD949
-:1022100053B91EC052029937C73016ED56F29A8B49
-:102220001A0EE75089BB1706B4AE8CA7751E48007E
-:102230003CFFE8B8FDDDDE0477BF9EFAE1F57AEAFF
-:102240000B3CD96CAD2B006767ADC383FDE1431434
-:10225000F176CFCE8C089A39BECE5B1DEB352E675A
-:102260008E46CF7BAB1FC7C307B1BA0BFDCF9E75A0
-:10227000FD3DC86B07135D2B397CE72BDA4701AFB7
-:10228000DE683DDBCDE1A8B1EB8392F914CFA6EB7C
-:1022900083E3805F5F22E195FFA3D0D72BFC029EF2
-:1022A000899AC07F629C5E8871269ADA9EF2E19BD1
-:1022B000A56D14DA31673F82EFAC8DCBBB5ED6BF24
-:1022C000C2C378D9CF01ABE7EB4E3EBF031BE33C63
-:1022D0008D1CDEAAC459F396F3A205265F72D06C5A
-:1022E00080FB2A8C57E3A818940AB8AD126E7B3F86
-:1022F00089776FF6B7C1DD88F1B0AFFDBB16D8E6C0
-:1023000016B444FE157F7CE07E9E8F305DF810F29F
-:10231000A3B3D0E4E17B04DBC2F50B3BDF57DE97D0
-:10232000F87E92AB3FF604FABE1EDF53A244FB9444
-:10233000474D8146DEDE37FE55A2D3B3CB1C1E339C
-:102340001FAB82B96CE0DB4AE6B501FE3F8EFBDBDA
-:10235000EBED7C7E73DCFA74CCE3B64453C68704A1
-:10236000879E5FC6F98D8D15F8FF2E7E606C838980
-:102370008D62EC66A91F2C90789CC6BC568C33836A
-:10238000E9568CFB9B73362FF4D2DF4007E5F0CE85
-:10239000627EFA3E870528BD8505A9FEADAC9DF29B
-:1023A000BF8E2E4AAFE7F0953D363807EB3104EF8C
-:1023B0004B24BFDC9624F8E58BFEC0FBA67E97C5B8
-:1023C000BF659AC0DF10B7BECA4DEBD595E4014C8E
-:1023D000CE09037D3121EB67623FC17F1667CEB71F
-:1023E000AD9FB6AED822368CE4812395E3E13A491D
-:1023F000CAEBBC4BA760BE902058AFDF93EBB5D4BF
-:10240000EC60499C2E6D2E732082C33279DC8A14D5
-:10241000CCF7176BD8AF8673FAFD629C9935524D95
-:102420002FB59B2AFB9B3A70D229E827EFB260D2E6
-:1024300008DEAEF4A27E388EE367AA796713D7B8B8
-:10244000D9E481D6CFDA43E4DAF549BB2C8CEB2F03
-:1024500037641BBF4F29E0F910B93B95597ACA3947
-:10246000FD0F003F903BACD90CFE7DCC1D93047D4D
-:10247000850D6543C5F9805323643E5DF66F6CE7B7
-:1024800079BBB7DDFA53E0A395F1E7E691DE611180
-:10249000F359F69E99F4CACF1A18388F9DE0FAA125
-:1024A0003797B1CFB97E81FCC986144ABFE4FA00E0
-:1024B000D2330D79547EAEC143F9AFDCBE9F804E5E
-:1024C000F3D77F65C1BE746FA4C2B7806395E4BBC8
-:1024D0007BD3473DF6578ED77BDFE50B83C353DDB8
-:1024E000DA3C0960AF4AFF6C2DF4E755CF691ED482
-:1024F0005BBADF6B737078161CD6EF019917BDDBE2
-:102500003E1562A216FA2BD71BEEB3FAF660BC9109
-:102510001F9D48D67905EFFE8EB71279FD2F1A461A
-:10252000135CA71ABC04D7E986C9944665FA5E43D2
-:102530007D2FFBCA86FA37EDECB0A4F1FAA55ECD8B
-:102540008BF5788D9705021C9ECD5621DF3773F9E8
-:102550008EF539AEF0E6276F6790BFFA9B683F2390
-:10256000A1B234917F9F3ABAC2827AB3BEE632CD2D
-:10257000DDC387DFBD0E053E6A255DCEBEA1119E7F
-:10258000CEEECDFFDE55BCBF378E989999C3D57579
-:10259000D14470751D8D0A406955F556EE31933E54
-:1025A000B932DD1600FE56EEC9EF0F7DEA34A71BE7
-:1025B000CBED19EFF40BFFE6D243E4E8E984D6FF54
-:1025C000FA1872EA5321A7B8BEF9F913906303070A
-:1025D0007840F77356AE9703D1AC2E1AFBD8329BD6
-:1025E0005C5F5CCE207F3A4A9C8347BD98361EEBE9
-:1025F00005E3B96C3D7228F7C5C7327FE0EA196F71
-:1026000047EB828F9FE0F9B30193DFCAF799B3AC30
-:10261000F5DCCF2147B73A3C381FDCAB7178B08F7F
-:102620006E1B40F93CCD12554FFC1CA0F59AA7B982
-:102630002CF55CFED4FCECF101E0A7D7380E46F394
-:10264000F2D73646937C7ACDEA39568FFE9E14FD3A
-:10265000FDE487777EB60FE983B5257702C999092E
-:1026600084EFAA1F2D1E8AF67C9F66A9BCBFE75F78
-:10267000D182917C7D166E3AB03695C3376C4B870C
-:1026800069004F8BB76A8D48F3D36F3862E6E5F681
-:102690004C17C1317CA7DB9C86653520F0F1B5B4C1
-:1026A0007F1BF7F5824D5F8DC7F152EDEF43B5D635
-:1026B0002F5B701ECE385AA213FE9AA99F3DFBA72E
-:1026C0007D700BC33CB8E600B82B6C1EDA4F02FEDF
-:1026D00016D0F9AC9EE7B91F6BDAE77F1CF43DAB6F
-:1026E000277BB0BFEC35F963C7A0FE310BCDF39566
-:1026F000ADBF8EB5F27CDC6E2B8BE4E5B5C59D934A
-:1027000050BF36DD45E7F0F4A7AE9B0CFC2CDBBDDB
-:10271000A785FAA9B17B34ACB33D17DE4AC379E88B
-:102720007AE6C901DFED16F907267A3DE0B7EA96A9
-:102730003F8B7C9B8FF23EB3DF6D41FD4AA1E73CAE
-:1027400026F731D65E44F28E58D9D543AF0778319B
-:10275000CA37BBFDA9758E9EFD8FEF5BF999BC3C16
-:10276000D526DB3BA765F8FE817DCB26F721D5DF9B
-:102770006336E68FE4FDA4F3EF1AF6559BD86FB7E6
-:1027800071F9027E51FB2D1FF7AA4CD1DE0B39994E
-:10279000C637D7623E9FB4C72202B4A75FE6F84AA5
-:1027A0004F5A1E25E499D23F662736BEDECEF1FA97
-:1027B000A758FD3ACC6F81DCAF99C59382F91D8F84
-:1027C000F54EC6F835F6CE0CCC81EF8753905F6698
-:1027D000E6FA535688FE64BFBCFD3022CE7B33DA66
-:1027E0005F6EFDB151BDCBDFB15DA349FEBE2EE5ED
-:1027F000EFAA3F9B5831CFAF7A2482E409ED69BD3F
-:10280000E0E575BEDE752E5FFE0376039E5EFDA7D6
-:1028100076339D3F0E9B6ADEE2FB290D9D89FFEB1F
-:102820006C8C1B41792FC87CCD9F4CBD9E0F55CA27
-:10283000E954877979BF36DA1BAEFDDA69A3FE1D4C
-:102840000997355F731FF335C78AF9EEC77C39EDF9
-:10285000567D5542F272FF65CE333DC2BB06F40D84
-:102860009F0787FB5E7C0F87BB9BBF3B2F0FEE3B19
-:1028700034E637619D7D650B609DEDE76062DDEEBE
-:102880005F5C10C07ADE6B13797FAC8DF4CFFD31C5
-:10289000CC0FF9B1BF2C39E077430E32A19FF6631C
-:1028A000A23C52B69F934CED074470FEE779764BFD
-:1028B00094ECBFEE9D4294AF49F37008B87E1B586C
-:1028C0009F49FAAD99EC8647A5BCDE141FBCC5CC68
-:1028D000BF6FFA2A97619CA32C98B61CF5AAA3484F
-:1028E0000E6D8AF7A626703CEEFDC64CFBC2A662B2
-:1028F0009E77909C26FBCEA6326F6A3CCFCF957414
-:10290000D9D412D8F628FA2BCBF3F8F93803CCAC8B
-:102910008EEAB9453F1F5B45BBDF49BAF0754CEB0A
-:10292000FC83CCF941E0599F1A6D815D84633C556D
-:10293000E3F03F5195C3485E4ABBD76C4983B93D2C
-:102940007CE0B58F825E2BFEE62CD81609793CA37D
-:102950003A92EC5247ABD7C6B8F87833747330026A
-:10296000FADFF45283DDE9834C2F8DCB0F16F29CF6
-:1029700010AC041EDFE8B433C8E5BEE859DB3A2EDC
-:10298000F144083F54DB84FC3829F5A15763F4F780
-:10299000C0EFCBF75D9F782244DFAB5A509A4B765D
-:1029A000DFAACB3BDF35824EC368BDFA4DE08FD640
-:1029B00048A2FFE49BED44EF2E87E919D8256F93D9
-:1029C000F2AA110761FEBD714F44602DFFB63C2293
-:1029D0003813F28AD3FFB9EDA0EBEB9144FF1A9BB9
-:1029E000E0A79A9FE7137FEDB579DDEBD0FF1B11D0
-:1029F00044F79A58571C95BF9DC824FF91DE501389
-:102A000015CC8DE7F85C1FAD9F02DE38DF913DB835
-:102A1000C626BE1F937C758CF70138FC7531C48FB8
-:102A20004CE6F51F24D2798AEBA3C4BFFA43F9948C
-:102A3000D76DDED405581F2BA309BE63D29E76AC9A
-:102A4000269EF8BBFCA1A5EF324ECF63BEEDF7E5A5
-:102A5000F27AC7F65B3DD8977E5F6F0EDA385DCFAE
-:102A6000AD3E3E6A33CFB7AFFD24430FB1A395AF60
-:102A7000AD9D8276E54B564FC57ED917BECB6B22F6
-:102A8000B8CCEDA1535296D79CC5F1EFC9D26D5980
-:102A90007C9ECB0BDA1742EE9DB3B53D85F3C1C7E3
-:102AA000717A24BE9F7FF58BED240F2D9DB9D0CF79
-:102AB0009759381F802FE5FEB95CF2E54B597A1C17
-:102AC000EA73FC913E1E5DD026E4DEEACB93F35F11
-:102AD000EEDFB657E3E32C8DDABF8C5273A008FD0E
-:102AE0009CD682B15A16F0C7F538DEDF196730166A
-:102AF00074D0E5B969E90EE3BCF007BBCA52FC83A8
-:102B0000B75BDA6A26BB0ADFDF6D807F292CBD0642
-:102B10007F82902BBC9F67681D3A7E3FEF071CFFAA
-:102B20004B9E1B52027D7269FCBE1F5E45F5783BD1
-:102B3000C5E7E64BF36A3E97C223E67746F2F919FA
-:102B400026E5E06C5BF7391C7AD0B917FA1BF8E67A
-:102B5000DC734328FFA5D6A94571B8CE4979C43C9A
-:102B6000ADA3CA7080F0B68E823EFBA8FCBE34B125
-:102B70007514E48F9247CCDE5A44E7EABCD6229C17
-:102B800027953C63BED65CFA1E68CD45FBBD266129
-:102B9000A7A03FCCFBF9B416C2835DACC725CFE735
-:102BA000135ED438E1F40B9FEFD42CE11FE0F0DE8C
-:102BB000E6E3F5076FB619CA87048CF999B2FEA04F
-:102BC00030BA0C30771E8880BC7F96D17A0D1FF703
-:102BD000D62C614FFFE94FBBE96096E745E652F41A
-:102BE00077097DDB0A7CFFAE1BDFB7A77179BA14CA
-:102BF00073CCEC99FFDE623D0D72FF9C49D8A9F7BA
-:102C0000C6F37C01F41C814F9557780CE7A3B5BF40
-:102C10005B98067FCAFAAC6E3F477FF05B23E425E2
-:102C200097178D56818F2F1BAA879FB0E03C5A972C
-:102C30005A65E999CFC2CDC576AC97455B8AEDF36D
-:102C400043CE3B8D3B861F7171BA9CD96121B34144
-:102C5000A325F043E8D18D3BCCAD7E46E5762FAF82
-:102C60007FC671F03DD45BB825BE047AAF6ABF68F9
-:102C7000F31DA95521F8CEDF61C47F61AB310F7B15
-:102C80007468FE47D00547FEE3ED8A83C6FCF02357
-:102C9000C6FC171FDE3E136CFCCA68C1EF27033168
-:102CA00001F8A9AA3F997404FBDAC9BDAFC4823EFA
-:102CB0004B3FAD7A0BE796459B8D7CC6E9A641AFAD
-:102CC000F76FD7883F1607C2D79D5CEF97ACC73523
-:102CD000CAAE9917CA27E1F43CCD5A677A393FD575
-:102CE000D4AF1C0E7F48F514CEB81C9E2B5B37DA90
-:102CF000E037081FAFAF75CF1C5E17EC5515A34525
-:102D0000D998FAF1EC388CBE1B7E3D09EBADE2019F
-:102D10008DF6FF8A97071F86FCEED835E7064A67CF
-:102D20004E263C28FBD9A2FD5A3086E79DA35DFBC9
-:102D3000DA79BB05018DF687F94D113D7288FFAF39
-:102D40006A43181C9B42CA39FC8BF61DF88BC6FBE4
-:102D5000AFDE626CB798E30B727FC9D6BF47847E43
-:102D600057E7BE31FB5BCC98F70205BFFF1A8679A7
-:102D7000091724171D525F39810C97F71109BE36C8
-:102D8000EC2F633689765C605560BEB50E9B0BF305
-:102D9000ADB5B3603487E3488CCDEBE4DF2F6C8EA8
-:102DA00021FBD4C208AE179650CA224BD0CE43FBAB
-:102DB000F4E7EF9B495FA9C5D8E8E7698DCE3FB539
-:102DC000303622FFACC82F66419A07F8C51B3ABFC0
-:102DD0008031CF9AC5B9A9C6123C007C2C61EDE2C6
-:102DE000DCC3E9E80DF1C7D5F0791E4D803E646C77
-:102DF000BF9CB552FDE5FBFE1E11FA3DC44E4AE7ED
-:102E00003975AE34DB9817FAB1F9EE28DAEFB9204C
-:102E10008E027FAED3BC8FDBCD48C5BCFC1B85FECC
-:102E200033B745EC175C3FCD057E366D1CE2819EC5
-:102E30003297EBD991D023164751BD4DF18CEC2B35
-:102E40009BE6E40A3DFB9B978318A7F3118DEC23C7
-:102E50009B8A45BF9B1E1C42E590871A8D13417AC1
-:102E6000CBA632559E4E7AD2C7002D157AAEFCDE27
-:102E7000CF45DF0798BDB9D0D7D9C39174DE577A53
-:102E8000EDB3097A6C76BF9EF92A3D98555F9EFE98
-:102E9000B74DEE779D1B85FFF784E67BCB14A29799
-:102EA0000ECA16FBC3A8F1DEEDB21EF901AA4C65ED
-:102EB000F75FCBE1A97AD4E46A74F7E09D79BDB9F4
-:102EC00098FF898D9125E0B351E385BDE758B19016
-:102ED000DBD1239837C0D3BC6CB17FE4659B0C6910
-:102EE0004A14E73FDECF8952611F8E19E1233B1B55
-:102EF000D7D9487E87CF638484AFCAE67BFBEA5E7E
-:102F0000E0E9E6838942CF38B1427B46C0C5E9CAD1
-:102F1000F3A37E1449F6B913725F51F8E77C33923C
-:102F2000F66929AF364A3ED908FA633F5B2CCE4199
-:102F30003D7C62E483B99AC02B7B50E8A79BE245B5
-:102F40005EF1013FEFB0BF824F4A19E1BDAF738F11
-:102F50009AE7A61651CEE93D05F40E3FF7287A33DD
-:102F60004B6024CE8D7DD17BFEE8F8519A89FCD64A
-:102F70007EF8ADB1D7115EEEB304D67238065A04AE
-:102F8000FED32D82BFB854F64795507DAF8DE72B09
-:102F90001E5EC4BCBC7E451A237B10AFCFE2509F9F
-:102FA00077833816EC1568571127FAADE8CFE89CFF
-:102FB000407F5C5E6523CDA47EBDA604D13EB68471
-:102FC000DAFB4DA2BDD7C2D34159429FEF5C171126
-:102FD0007806F2F9DEF45CF0C194F1463EF88F6CAD
-:102FE000B1DFAB74688E4B1A953C2958DFF39B8692
-:102FF000D07ED118E9ABDD03BABD20F4FF8A7B6E29
-:10300000BD6924E07B31D103F0BE9CBA8BFC0DF38B
-:103010009BE6DCF111CE0D3B22E9FB7539FA5DD957
-:1030200023A107BAE6EDE11FE6CF38644BE1EDF5E9
-:10303000D6B2B33FE7E954FFAEF7A00F4C9D6EA6A2
-:10304000FA5399B08FB22631CE4DFEAF2C29BCBFBA
-:103050009BC66A1433D011E9CC58C1E1AF90F4BBE0
-:1030600047F26F63249BFD3307E04ACFCDE4DF6F67
-:103070008286D98BFFEAB0AA3F4EDB02BD66D00440
-:10308000B1BE547DF4837EDF96EB69A3C48BCA7313
-:10309000BC52FDAAF5111D59B148ADC1C13CEDCCE2
-:1030A0001DFF08F86A4A269BB41978BFD38C5805CF
-:1030B0000E6F6705ADFB985C17F854672C48F1114B
-:1030C0008121C4D71DE33A3BEEE5F98E96C11EB2CD
-:1030D000F9C873F4029CAF5C2817724CC99763CE91
-:1030E000F618E25779AEAE94ACF1C7FA098F5EC11B
-:1030F000EB573A6C1DD80F163C322D167126959B56
-:10310000CC229E6383F15CCDCFBF2F812EE1E7E41B
-:10311000F0F33078067C54B541233E1CD4E8B1A5C9
-:10312000921CD39C985F9523980DF95EE589F4A0D5
-:10313000FC4C8337F14436FC119329655F73BC8FD7
-:10314000823D965110C7C11C7D3FF054D15C41E7D0
-:10315000C5E8029DE4D3DFB25D84E729B02742DEF3
-:1031600058DA53B10E6BD5F70467AE83F839920184
-:103170000F1D56672EE0EA581769C2BE3965ADE0EB
-:103180006BBECEEC16DEFE3E0B8BC27ABF5FB62F57
-:103190005F63F1B5F0FC403BB3C42480AF8A89AFD4
-:1031A0004B06EB1B818793FFCE4663FFAFDCB091EC
-:1031B000E0517CC12C6D1313A1DF6D7397DCCF7AC6
-:1031C000F8A864F0F80FD0AE9B1FA66BC4073C3D77
-:1031D0009045FC70F351944F191FCC5E59003F5637
-:1031E0000DF3C28F90C23CB00774B14ED227BAB86B
-:1031F0003E0179A6E489921B9C0FBC88EB51F455E3
-:10320000F2637B030789E37547839DD29F36389924
-:1032100085CB809D0D29947FB1C145696B431E7D8F
-:10322000FF598387F2BB1B46537E6F8397F2FB1ACD
-:103230002653FAF3061F7DE7782139A4E48A9247E2
-:103240008A9F945C0AE7A3791CBDD794507B927B3C
-:103250004ADE611EA6921E79A4E89BA9F9FC296E9C
-:10326000C8B1F6399017A5E6332FBC023B49B5C368
-:1032700013E1025E84DCEB72D849CE67D8D83E9C5D
-:10328000D71B57783BEE0DD9576FA9D69825844F99
-:103290006FAD8B6496103EBEAD3EDE902FAFFFE06B
-:1032A000CDFEBC7F2D5E77E470388EDDFDF993BFD7
-:1032B000E5DF9FBEFBCB1CD09BC3B1ED318CBB3A8D
-:1032C000AA1B8E04E49BACA43F0C8A12E720FC816D
-:1032D0002EF399589F4FDFFD575ADF1DF5112E33FE
-:1032E000AF37BF3E82F0F531E8C4F1FA7B49A78AD7
-:1032F00075C75F7805EB7CB58DE4DCFC26B92ED76D
-:10330000737C86E86B9FA532D2CB342F63F0C37CED
-:10331000F6EFB620DFF3D9679A3DA041F7E187A425
-:1033200072FE5D5FFF0B8ABFD2EA8F903EAC232E08
-:103330000B7602BFD5108FA5D5CB38ADF681863878
-:10334000AAE8115E1BE403781A749B9F7790615D75
-:10335000B366CD892DA04A7EAF5AAF91BED1AD2FB5
-:10336000E498898E75D9164ADFC31AA7FDA299F68B
-:1033700027C5AF5C5E78035817CDC5B68521727836
-:10338000BEFC5E9967A2547DAFCBB6513FEF41388A
-:10339000F07EEFCFCBB42D2039E7B2410EA8FAF37F
-:1033A000F34AEEC91C817EC625B190F5E8CDB15037
-:1033B000FB3A047AE17C6417F6FF9A3EF601A59782
-:1033C0009CC43FAF24F8E9BCB5E4C5E75F847F6CDB
-:1033D000C9271144A725C3A43DA220306A1AE933A6
-:1033E0005E87C6E7B94CD27FE2F39FC6B6F3F2E53B
-:1033F000BB85FD92A71D4897ADAE26BBD6320F5FA9
-:103400001F0990AB463FF2E1173F896DA773853FD7
-:103410000DF1857C5B486329F0171D9F04BBF87292
-:10342000D6790FE2BAC2DB2DD7BE8E15F67DE12725
-:1034300057FECBD2D7FF9C4C70ECB9900CB9B6FCC0
-:10344000F575C97A2FF35E1EE6BF567E7365075B7E
-:10345000CE367C05BF5B78BD9539D2AF7D05BB828A
-:10346000EC141646710C2BED020F5D819C38D6CB07
-:1034700078DDE36EE6829D9F43BB2CAE380F87F369
-:103480007C1F717CAFE488FDF9ACF4A39EDF692654
-:10349000BDF0FCCE18E2FF653B1F7EEB2A9E5FB6B7
-:1034A00055C3B0AC96B5119E96ED36337BE8F90660
-:1034B000769BC4BEE15CFA7C4C1DF86971ABE6DD1D
-:1034C0005600BFBC2BAE5FA8BE28F9696944EB2843
-:1034D000A28384FF7EA91FA97A8BF73F6C03BD7876
-:1034E000BD73A4B7BC140D5D9BFF75BE07384F6F4D
-:1034F000194E7EDDC5ADBB96D1BEBF33DA89297EBC
-:103500006935DAA30239623D057284BE715ADA7FE9
-:103510004FBF6826F90338B10EBFD4849D57B5DB81
-:103520002EDB6D9778BB2947AC47557F716B476C95
-:1035300036AFFFC5BE0F286D95F35AEC682BC27EDF
-:10354000F9C5EEE8C9014A7F3CE9353EDED9D671BE
-:10355000495AC8BA7A3D47C40D9FDD629E0C7CB1C2
-:10356000808A336AA5F99CDE99A6D1B916F8E6F8E7
-:1035700039BDFBE55813AD5BBF6827E968B20B7B2B
-:10358000AADBE292F60BBB137AC65CAED5C57179A5
-:1035900057BB5BC403847F57F569BDA582DF3B6DD4
-:1035A00082FFA5FF5EFA97102742FEF8185B00FB2A
-:1035B000EBBC61AE59B7409EBD6315F418E87A0CB8
-:1035C000E7AA79EF2792BD62A5D5D51FF93FBD6B5C
-:1035D00025FBF9BCE1729DA7B48F847DB2C32DF6A3
-:1035E000F59AF57C85F0290FE0F4F7F3F9D5044C52
-:1035F000144F793C2793E07AA2DAE4B5919F23989F
-:103600000B3BE5311BF39BA127FF2C92F4BB9A4C9B
-:1036100061777F02FCCED39A84606E22EC5D928E3D
-:103620003537F3F2107AD63C13CC85DE72C626EC21
-:10363000782877222D11F51A25DFA01FF4DBE1761B
-:103640009E23FD724F0C839E6F7A2546D8137E12FF
-:10365000497E07D5EF05C9578DD2CFE5DF26E003B8
-:103660005CD09B17DB9A73A157AA7117C736D37822
-:1036700067E4788BA39A85FF40C685A13E8D6F6570
-:103680005E9CC73B9F8B20FDF4CBD4B6BD18FFCB0F
-:10369000E786901FBCC31D58B88FCAB9DEC6E9B013
-:1036A000E4A71141C07BEAB918F2739EB20A3DE863
-:1036B000544C32E94147621E9D87FEBAB64668B057
-:1036C000A79CD2982D05E5DBFA91BF6A49433DF9E5
-:1036D0000996F0E50E7F344F27C3AF7C6ADB10B24A
-:1036E000B39CFAA599FC8BFCFB7A7CD759F3BCBB45
-:1036F000B0EE7644939DEDCB9FFE6D48A8FF41A5AB
-:103700004BB61AED498AFEAA3C2957ACAFA45C819E
-:10371000C7945CB1CFD446B73E9A49F314EB95D326
-:1037200081CE5B7C7D24C33E7DACF5D564CD013C70
-:1037300007737F0CBCEF10E79A2F775AC92FB2E4BA
-:1037400095182FD96FEEBDC284FD628959E8BF4B31
-:1037500038BB8954D88796C4E6927D88E39BCE8F88
-:103760009DDBCC721C31EEA9EDE9C2FE1E94F9BDC1
-:103770008501F0F9940476DBCDA4DF6C29025E2F7D
-:103780006C8D36812FF8385EF8ED97DCF50381CF2C
-:10379000B885A48F33C4418F82BF5CC8CBDA7BAFBE
-:1037A0008A433C0C7BDFCC20FA2E583CFD210FC312
-:1037B000F1B52857CACBBD4FDAE03FABE1EB05F1DD
-:1037C000414BA5DF74E94F35D2E796DE73D563240C
-:1037D00007DFB3B21C0EC799D6876343E95126FBB6
-:1037E000E969EFA1FA4B797DD1FE9D588267BBD57F
-:1037F0000378C2E978D9ED7F6ABEACF6DDFCD1CAA8
-:10380000F7F5A24BE77D81B57DFF13C8919D911E11
-:103810003F7D6D25BFF3696BEB42CCFBF40B91242C
-:103820005F4EC78BF5FE0597877E1BE0B8F121B28E
-:103830006FFC661A83E85E1430F6ABC69D992BE4E4
-:103840006F6DA2270EFE8C5A4E07F4C7E9F23D6A4F
-:10385000FFBE95DA87CF63A46CD7BD3E5F88267E16
-:10386000393D40D0E3F48B83695FE988177CCEE172
-:10387000CDC039E574BC487153067CB0449E434FBB
-:103880008F6BA573F7696D17A51D56D16E49BDF4F1
-:10389000DB72BE4B01DF8027E1B7B26F68831E0188
-:1038A000FBF4A8124A83110997DA99C19FD8875E61
-:1038B000CC15F62CA83590EBE4DF20FDA4D50679D5
-:1038C000AC4B3DAE66E7A5FE32F283EED4C8EFF313
-:1038D000A05CA7803A49D9C7393F2EF56B5EC41B5F
-:1038E0002D6D5AB118FCBEB46EE32DE077358FA56F
-:1038F000163619E7AB0ECD4CF07444F275033C84D8
-:103900008E97D983DFCD0A5E809C4C7A2629D75BBF
-:1039100072C57E857C33EFAFA649DB40E3B8D5792D
-:1039200052CC4FE189A3C5063B193FE78BF23EE637
-:10393000AFE00C9FBF82A73557D8273ADCAE87C6C9
-:1039400082DEBF3293FDF4C2D7C3E312BE452FC35C
-:1039500089ADDB5ECCE17F9DEFD5E8C70FF986F539
-:103960000C7B348733778BD1FF91B7D5981FBAD3AF
-:10397000982FD86DCC17ED37E63D878DF96D725CC9
-:1039800085279C7311D786732E529C735DB9E29C78
-:103990008B3CCEB94871CEC5779C7391C7391779E6
-:1039A0009C7391C7391729CEB9F87E4ECAEF1A69B0
-:1039B00077041D28BEEAD548E507A7F5727E4E328A
-:1039C000C94FE5CF3CBFB880F2DDF69C323BD973DE
-:1039D000549CCE2D71FAD15CF21BB6DD930ABA5914
-:1039E000DAC98EBBFCE7C28E5B5312E9807DA17DF4
-:1039F000DD17F7407D2A8AD33FCDA5B8A6CEED22AC
-:103A00005E294872A37D8DEBFD6B05FDC8CEA1E25A
-:103A10006E2AB0DF25F44DC7703F0ADB60F49B844B
-:103A2000FB51C2FD27E17CA0FC264F5B3B5321EFFD
-:103A30008F3F67DF00F88F4BFB189BED24FD4BE9B0
-:103A4000D5DDFAD783DA33D8B7BFC94DA0F65D47C5
-:103A5000B8BEDDCB7EABD2CA8B25A43776E73768FC
-:103A6000268A1B4989A57D6895842943EBECB81704
-:103A7000F22EC644FBF8058789CE05173E34931E07
-:103A80003118FA79C87C8604A20CFC95BF2321CC9E
-:103A9000FF37C0507FD8BECC30FFDF50A35F6AFA3B
-:103AA0009A03385F4FDB30DC50AFCA7755181E25BC
-:103AB000DC522F6D5CBD3903F267554C17C1BF6AEC
-:103AC0004F24C5D5567178BDF0CB21C351506DF749
-:103AD0004E05FEAA5BADF1D8E72BE5FEC3EA8DFBF0
-:103AE00071B585F99D093D7C57ED64DE78DEFE6C8D
-:103AF00071F37613A7DB59D39647C7BAE0576AC963
-:103B00007072BEBA5D6B4DBE92F7F7378B5E309820
-:103B1000F35B8635F8C372C8CB5D596C0DAF777C0B
-:103B2000C3CBB1A4774B3ECBB03AA340EF966633FC
-:103B30009D0B60973227F4F0434B736254B6A36732
-:103B40009E3DF4FF9AE6C7E9E2C13DC52EC7C1819B
-:103B5000ABA0C7B58AF9568FD3FCA427CBF9AC9498
-:103B6000FB0ACB16FDDC2EF327E47941CDEFCC9098
-:103B700003452EF8311BF6659821C74D3BB7E3FE90
-:103B8000C0DD51FA758347225E32E7B763F9B84B5F
-:103B90003E12F1BA7FDC3421F64AE89F2F583D539C
-:103BA00078FEDEE6676D38172FB1046C3877563F24
-:103BB000D762F3F2F4BA1D2DF47DE18E0A3A6F2F2D
-:103BC0006275748E3CA9E26F253EAAC76B5B9C1C94
-:103BD000EE17070BB9511D25E2364ACD63DF445C71
-:103BE000FA851D5A31E63BDDB7CB5601FBB3AC1766
-:103BF000BE3EBADE9D56DA0FF6A456E1F7EC6B3DF9
-:103C0000CC08E6D17A9876D145E9F48B43E91CFBE0
-:103C100011F315929C28083BCFBE2BE290BBF68B8C
-:103C200075506D0B264DC33A79C34AEBA496CBAFC2
-:103C3000D1253827333686A7BEB16603BF2E9F181D
-:103C40006DE0E7D92CC1E0479E894B9B21F9E953F0
-:103C5000B20CF5674DCF0FE3FF929E729223630C77
-:103C60007126B5ABFD2E8DE259C61BBFF37435F13D
-:103C7000D90D86F6B5ECE69E7A38076FFD35E199E9
-:103C8000B1361BCE5BD5261157335BEF90DFDBE9F6
-:103C90003B9F88611D0ECAF2FC56EC8B56B2CB2BB3
-:103CA000BBF46CFC3BABB77D91135A8E8BF850D8AC
-:103CB000170CF1851C003A7F3241875A69EFA9CD74
-:103CC00013F69E5A7F9B0DF1B71CFF96348E9265BA
-:103CD000CD1AD9F3787D7B5A82C8AFC6F7DDC6FB13
-:103CE00006E8EF22CA8F982BB05EC2CB97F17943DA
-:103CF000CF58063B0DEC4CAA7FD9AFE2CF459B8D48
-:103D000076A365B0E784D0F1ABC12EE2D3253B7634
-:103D1000BD3580E3659A2FBE18EBA7A6B5CC5A51E6
-:103D200070299F29F97EA1DA447EEEAE770F119FAC
-:103D300075555B889FBF0B1FCBBCC29E19CE7F0BF6
-:103D4000F97CE0975DB85BF30434510F781900BE3D
-:103D50000CC34B5A2FF85278EAC65B58F922FC6321
-:103D600004E206B440D0DD1B5E241E55FF6178627C
-:103D7000A38D7858A8BBDE87BC5978C4CC02973194
-:103D8000EF45981FC6E7F3C3F8375F147612E5379F
-:103D90009879D142F96E3EF189F8E9E9538CEBB29A
-:103DA0009B6F7C629DCCB8984CEDFEB7F9E7BBF8F1
-:103DB00046C11D1E9FACEEF7FCF76069271CC94683
-:103DC000D2FABFCCB861B5DF2B3C0FBA7B34C51338
-:103DD000753932497FE8DE6F9CC6F29531991447F8
-:103DE000AC4BFB9C92BBBAACA7C6A9E0E5AEE1E048
-:103DF000E381C9B0BBDED39495D11EA297E8EBACAA
-:103E00006437CD5893486945A43319FB45C51AB3A7
-:103E10000FFBE067F7F54F1E0D3BFC3A6BD214DE4B
-:103E2000F567778EC86085C897527A7C63C4EC507A
-:103E30007BB64A5D79623FA8BDFB28ED5F674DEF19
-:103E4000C6CEC63A5BB7271621354BD77D30CAC9D7
-:103E5000558F168B3E280F71845ACB7627F0E66C6F
-:103E600029823D7A1868D7AF474F58B2AEB43FECBD
-:103E70005F35DF1C7A0AFBBBBEC69A0C3DF3D487C4
-:103E80007CFFD368FF22FDE024E28F93E0B78AA68F
-:103E9000FB6D2735E685FF66B1F94091D3B09FEE03
-:103EA0009F09385E8DD287E5919F36B03D05E37B53
-:103EB000FC142FA9AFC989EBCD5EA2D2E59B85FE8C
-:103EC000B65DD96BA55D177A3BF2D0DBE11482DEDB
-:103ED0008E3CF476A4D0DBF1BD4CDAEB07357616D8
-:103EE000E3DCE91FCFF2EA687F75E4412F5FA54567
-:103EF00079206F56699EFEB083B1ADA9625F0DA3B4
-:103F0000AF4AAFEEE4BA5508BF5F7BD1CE42E3C7FC
-:103F1000C6B178437E823DD550BFD4E936945F97D1
-:103F200032C4507EBDABD890BF31EF4A43FD9B3CBD
-:103F3000E30CF9EF8DBEDE50BFCC5B66C84F9B3CF7
-:103F4000C7507F86AFC2503E6BF66243F91C7D8539
-:103F5000217F4BF59D86FAB7D6AD31947B99D382FC
-:103F6000FD6D3FCE531CEF6FE03CC5D355BFCA710A
-:103F700084D275EC04535D6FF6F8EF4BFEDD3CC464
-:103F8000BB02FC992EEF81A4CBFB1C4D792EE2CF16
-:103F900034DCDBA7F36C5B2AF826BC5E78F9D8E842
-:103FA00083175C9C867FD83173BA85CB87B1571C49
-:103FB0001C9EC5F309431E986EE17265EC55075FC0
-:103FC000CEE4F90143DE14E5C30E5E40F903431E5F
-:103FD00012F9698C548BCC21E3A7FBF93CC65E9B9C
-:103FE000B9C123EC21BDC65BAA147840DC22F08065
-:103FF00034C8F913E941CE9F480F73FEACCA66EC92
-:104000002DCE9F488FF07325BEBFCDCF9548DFE5FD
-:10401000E74AA4EFF17325D2367EAE44FA9B86D9E7
-:10402000947ED8A053BBFF6CA8A6F468431D7DFF07
-:10403000B8A19ED2DF37F8E97B204FD90F826467A1
-:1040400051FEA465F0E3C10EB7CF7A26D4CFAAFC07
-:1040500081CAFFD758C7DAA3B14EDB2DF19FDB7BB6
-:10406000FC7A7DCB590BFB3C44DF6A89F63E9F47C7
-:104070007692814E92D7F2FB786D5A7A094FFFE221
-:10408000D27781DE334A2AD7C5B9710FA4CE0A7E12
-:10409000F9C8D4FBBDE0A63C617F5839C4BB97F892
-:1040A00044FAB1951FB93B3E25C4CF6D0A898BA157
-:1040B000BF90F816E56F56F134D7D8457C9EF227AD
-:1040C000ABB819D55FE94546F2EEEAF516D24F6274
-:1040D0002C2C88FE557CCCD5F6D662C40B5C5DE3F7
-:1040E000A038B4FEFCBBAD84EA79CD3CDDFA675E56
-:1040F000BFA8C77FDD5FC2CFCB09FED28B3AD95DA7
-:10410000AF96FE7BB4B78B723FDA23760A7A064FFE
-:10411000C9AEF624E29C4A7AFCE9A81F2DEA07D131
-:104120005FF67FF1F1627BD64F7A426B31E2A9D222
-:104130009739289E6ACBB820DDDF5AEED63F039D23
-:104140007C11CE4FA369FD64A5C34E5026F5DE6FEA
-:10415000A1C31768A7F0A3F0ACE8A2F01B12774444
-:1041600078ED8B4EE1F409A78BA247E9C51E3C030D
-:104170004F97D2A1874EB0C7FEBF4287119656BA5D
-:10418000FF175163F700AEEFA2CB6D9D6C12EE13DB
-:104190000FCED49B80E78A8BAEB790AF64E32661E5
-:1041A0006B52E59EEF289F85F27E7D97DFD147F920
-:1041B0003B912A1EC1EB28E6749920E5C7AA5281DB
-:1041C000DFC96E33E17742C122D2479943E8752EA9
-:1041D000FE1FE4C9A4AF7D4DE86F5292513F54FEDB
-:1041E000E01B647F93C3FCC03748BDF18630BD70CF
-:1041F000D410A9F7B9995B9CFBC43DF789729F4E17
-:104200009374CEE287F9B1A023D32D105A8771CFD2
-:10421000BD08F7C0FD94BF9E0528BD910569DFBAB2
-:10422000890B38E4BFC718C5331E8A9E5ABE9CF757
-:104230003761F8846C7C0FB9D777DD907E74AFEF6F
-:104240000FCE907B7D0727BA486F3868CF223D0696
-:10425000EBC01A6247FB2597FB086538C4F705A435
-:104260006FF27D219B33F92FF8BE80FC0D796B181E
-:10427000DA4D7219E34D54FB1B9DE3996578DF72AB
-:10428000F7C6A25707C2BEF24EFCE089B03BBF138F
-:104290007FC544CCF79DF8FE269146D8282D7C2575
-:1042A000BB373D4BF161CF78939825F152FC2A7CC6
-:1042B00086E351E1F79FC0E78ADEF0D9041CC0AE67
-:1042C00067FF20362513FE2FB1FE6B5F29EC0FF838
-:1042D0004F0134C425DB055EC2ED3B5F34B081C0C5
-:1042E0002FDB1A47DFEF903C7475FD18AA7F4DFD58
-:1042F000689ADF5551FADA217C9C3325C15CAE39CE
-:10430000B02FB634D2FDDBB32F9A3DD0BF6BCCAE0D
-:104310000D1EACF577C47D39F6F5A10CF8DBD8D6C7
-:10432000DEE3766BEC0A6F7EC2A737D3DB24F63F61
-:10433000718F58EDBF032344BCABBACFDAD77E3CB4
-:104340002A4AC8958111420E2A3AF176944FE3FD2C
-:104350008CE27223EDA128D2BF4724781F073ED5F7
-:10436000391AF14DD8A7AE09E6C7213F19E7499E92
-:104370007F5BDE4F7B7B685D5226C7F7219BFE2C5F
-:10438000DA31F3D766ACEBC61C8DEEB9771DC94A9E
-:1043900002BEB7A97557C48A42DF1B50FA71F7787D
-:1043A0004966F28BAF847F3409E7263BD98BAE6137
-:1043B000B9E4379D28C72FFD6525BD83A0EE7D4458
-:1043C000A4988CEFE7B8A20CEFC144E72518F231AE
-:1043D0009E0186FA71A3330DE5F1DEA186F2C4C910
-:1043E00025867C3FDF1843FDFEB3C71BDF75D36F07
-:1043F00030D44FABBED99057F22B4D7C62E9757328
-:104400000DED07D5CF37D477FB9718DFB7F17BDBFE
-:10441000F29221F7C45FD6FA9586F21FC78A7B0D08
-:10442000931D0BE9BD8A9CE6BB8CE34B3AA5C509FD
-:104430003A319790AF7EFE1FF8A634C5286F273813
-:104440008DE76DAE0F6AD8DFD3EA2C86EF9FFD0FA4
-:10445000E91C8E972EBE3505511FFA10CF5FA30FB2
-:104460007D08768D8949564F80097B7AE8BC604F7C
-:104470000FC503ECE9A179D8D38DEF4219E90E7B82
-:104480007A68F9F02346BA8F6C33D2FD8AA346BA14
-:104490002B7E0CA7CF95ED467E08A7CF5527C3F8F6
-:1044A00043D26336FFEFEFE29E34D16B9243634F0A
-:1044B000B8FF79FA240FE5F4C9EFA1CFFF49D35330
-:1044C00087F6C3FDF40B1936D0AB53BCD7B742CA3D
-:1044D0004F154FC8CFBBE23EDD5D66F2EF1F3335AF
-:1044E000D37B49079DBA1BED6F2BA8D3E03F4861F2
-:1044F000BE5D0B397CF3FE2382FC09F306897B9DAC
-:10450000ACA09DE2EC959C9B9726E258860C95E723
-:104510000B8F886729182AF4C2188F93E25E2B0A42
-:10452000C43D027E2CC8985708FE793712EF1676E4
-:104530006D12F6FB76ABB85FEAE77C04BF18F44473
-:10454000E871E9528F6AFC9DDD0EF8076F66867D83
-:104550007148C06E88BBCCDFE134E40B5B530CF5D3
-:1045600087ED7319CA8B837986F2E1473C86FCC8D4
-:10457000B6D186FA571CF51AF257B64F36D4BFEAB1
-:10458000A4CF904F639D8F03BF8334711EAD1A2A51
-:10459000E278F81A227FD2BC7BE3C5FD41794E5503
-:1045A0007AB08AC7D525DF85EBD3836C3AC5F73659
-:1045B000A6320FDD03B0CBF30933EAD9BA8CA75585
-:1045C000FA28F31BE369551C6DB73E2EF56FA50F56
-:1045D00087C4D17A43E368E7C97BBEE1FB5E9DA453
-:1045E0007B38FC836C62BE8D77DAE8DE82822B1C1E
-:1045F0009EBFC9F8CE6DF6DEEF8FDC3D54F8DB7F51
-:1046000099E5FB3EF8F529888FACDEC6F3B4FB399B
-:104610007F35FEBBCDB3D6F5DDE3CD1B26E6536E6D
-:1046200032DD565640714BB37F1632FE0FE5B8AB04
-:104630000AB45EE7372F4EC415B1389B0BFCDBF78D
-:1046400078029F2936D644F75C64DCF9AD1B5A1F0B
-:104650008489BCDCD66C15EF9705ACE08729E3B9FB
-:10466000FE540CBBD5370F3BB89EF154BD85EC1002
-:104670008F0CBD69863FBBE71EC1207EBE007F4018
-:1046800057C1B9C45E20E266F70E15EBBFD4FC75C6
-:1046900077FC37D9D31993F25B9C5B7AE137E2431D
-:1046A000358F7F751C78389ED4B990C97D275BC241
-:1046B000A5F0D77D8E97F853F1F8AE1556DF330E7F
-:1046C0008AEB9F8C782645BF8105822F4F0E15F40B
-:1046D000463DC8A3BEEA959A0BE260AFED62AE38E4
-:1046E000E7B7D823FF557851F8EFEB7E4F5FF2E143
-:1046F00012B9D0C77D9FBEF893FEFE817B3F21F2A9
-:1047000041C497487A04B24DE4CFBD37C6B88EFB9A
-:10471000E70BFCEE57FB859F9F278D7282C1BEDCA5
-:10472000B8CE2CE584D857A16FE0FB827556D237FE
-:1047300058BD8847AE96B298315FF29811F0C75ACB
-:10474000E93DAB6BBC8CF491F90E5BA085D7AFF063
-:1047500087EFAB5E6A4FFE1A17DE2DF1DC03FB7BA1
-:10476000E57A63BD450EF1AED782B073E922792EAA
-:104770005D14762E8DCC97FBB28779486F92FE67D9
-:104780000567375F05B2282E18E754B3B09750BCC1
-:1047900052B71D1FFE85907734393EA3F2B06F37B4
-:1047A000597A8D23EBC6671F7EF233F093BBB0FEC0
-:1047B000BBE8FE4FD7EE48E14753FE0B59FF8CFF95
-:1047C0000295A33E7A3B5BDC56043F52B7BF23CC35
-:1047D0006FD2E530C58E467F3BC5FB0B2A0E60C904
-:1047E0005F0345CE103FA7DE6E32C45D84A7FA9A00
-:1047F0003D1417D062D14BF2F93C4E5B3C76BC17AE
-:10480000799FE36032EE6B4F91F69A7078BBF5D0EA
-:10481000B19AF013FA851EDA3559233D94CB4586BB
-:1048200075A4FCD9652C988454F90FF4F5A309CF2D
-:10483000CA7F50111C4D70CE685C64C5937DED8FAE
-:10484000AF2E8D72F5F815DAD3453C4A5FFE8569C7
-:10485000173DD4DFF48B63A89FB27CB7B8C7D5F4FB
-:10486000E00AF0D1D01DCC8A79B687C563ABF4409D
-:10487000BEB07F1FCB57725BC6B9ACD1849EAD3141
-:1048800015F742725BE52F34CB7CA9C8AF5A27F2EB
-:10489000EDF21DA3EDD2DE807922C57C702EDE29DB
-:1048A000ED11980752CC03DF21A790879C421E721E
-:1048B0000A79C829A49053F83E9FF9328ACDC20FD5
-:1048C000323164DDC00F3231440F821F24340F3F78
-:1048D00048687DF84142CBE107092D871F24340F3A
-:1048E0003F48687DF84142F36CF4F53D79C8356F77
-:1048F00099213F8DEBE31343D62DFC20A1FDC30F7F
-:1049000062E84F5F61687F0BAB37B4871F24B4FE4A
-:104910006DF59AC14F729BBC975EB93981F8638E71
-:10492000DBF7C37C4EDF3F447F738715E734F3FE2C
-:10493000C5747EAA8DF2083A374F1674373141E7B5
-:10494000CE3944E7D536912F1571B1BDF91B2666D6
-:104950000B7F0352F81B90C2DF8014FE06BC870D4C
-:104960007F0352F81BF01DFE06A4F0372085BF011F
-:1049700029FC0D48E16F400A7F03DAC1DF8014FE95
-:10498000067C87BF0129FC0DF87E0C7E8FEC1EB8DB
-:10499000A0B7671BCE779C0F0DE73BA7210FBD3D4E
-:1049A000B43EF4F6D072E8EDA1E5D0DB43F3D0DB02
-:1049B00043EB436F0FCDB70D75D1BA84FE1EDA0EEF
-:1049C000FA7B68BEB0D9FF266C4C376D3977186911
-:1049D0007B8CF694C645C1FBCF1F9F01BF517BA4C2
-:1049E0009611CF97BC553B356322D7CF74195F56CC
-:1049F000C43AE97D675DBE5BA30719C5C316FE25F2
-:104A000045C805756F087F9CEEC5BB199D03CAE4B8
-:104A10007EAADA7B98D34C724BD6EFC9F75E2F7C17
-:104A20007C558FE465081CFC80588C3888E2D58E54
-:104A300012C4716F3769220E72AD88430DE72B7374
-:104A400081904BDB4DBB0E4621AEA542A3F7E2732E
-:104A50002DEC08DEF12E6CAE2B81BE703A3F5ECE9F
-:104A6000AB6E0CE26214DCCA0EC8E504DDAB1ADBE7
-:104A7000C96C5505784F8CD91640BEDB849E807674
-:104A8000383FE6FB35EF3321FCFDE77CB1BFE9FEA3
-:104A90001563AAF8F7FC9D7563705F6B4A9468F71D
-:104AA00093A763098F539BB467702F6EEC4EE6C5D6
-:104AB000FDCB6FA43CCDDFE9B455D1B84EBAE7A524
-:104AC000FAADD89241F7D22A58FBC414B2E56BF480
-:104AD0008EB9C21B9FDF61CC8F8BF82356D247C59E
-:104AE0007D9128795F44DD13715B7CC1A1237BEE4E
-:104AF0008B5C3D22BE14F15A6CBF7877EFA611157E
-:104B0000EBFAF1FEF5807877EFEA3FD5BD49F9ADD4
-:104B1000E2DD3D628351340EED6B83FD1ABDF7304B
-:104B2000D5DF624A72E1FEE81A6B32EAEF641EA832
-:104B30003F8399B807A9E02B606D26BC3BCEB798A0
-:104B40004389217CC425C074D0BDD863A5F720CA91
-:104B50002C4E2BE446F83E7E693C5D989E10160F65
-:104B6000D1B8FA68863913F61E932708B9B5279A83
-:104B7000F405A5EF54C838A80B4D6FD27BD615BBF2
-:104B8000847EA0733900F9A7E2236AB3021926E8EC
-:104B90000B035A8A12CC62FF2FC07D24FFCB334710
-:104BA000BB708FF14D8AD7AF5837324EDCD711FE2C
-:104BB000872A89A72A19FFC20A9CC9D03BD53BA6E0
-:104BC000A5E6B17174DFAD59E873CAFE52F1ABE1ED
-:104BD0006F81CE154FCAF740D657D03DA0F038149C
-:104BE000A51FAAF74E16375929BE6571981EB854ED
-:104BF000EA814BC3F4C01B0AC2F440F53E9DAC539E
-:104C0000F1AB4333484FA913EFF195AF117A0BDBAA
-:104C100025DEB12F5F33C184772BCAF7783D5A2F39
-:104C2000FCF1BED45FA660D044C4F90CA074E6C504
-:104C3000144A675DCC233980BB18A07FFBAB8CF492
-:104C4000E90FA4BE3203717EB81FE78F90F17C8C10
-:104C5000F4A562E62C85DC18EAD50EC17C3DC5AA18
-:104C6000AF431CE1941646F7616E825EC30B664348
-:104C7000CF190E3E7797D2BD80C91ADDAFB869C48F
-:104C80000AC9D79CCF19F8DC2FF9D647F9EEFD40B9
-:104C9000F2B7EEEFB0D0BBAC7ECD8677D974799EFB
-:104CA00055FC1BCEE7F3E4EF4D3087B03375DBA145
-:104CB000002C3DAE72CD4CE88BF360BB1B2009C9C4
-:104CC00051145320CA9B0AAE99D984C3CDFFD03E5C
-:104CD00051AE7E8781EB5990A7B7DE5E6C9B1F2299
-:104CE00057CA8AC63F5BD8AF87EEF3BBEF8D15F48A
-:104CF00087FEBFF2BE9CFEDF767FB192E319EB63C5
-:104D00005E5CFB1D7819776B01F34E1C8DF798D50F
-:104D10003C5910F16A7365FED7058BFE737D01E186
-:104D200087F2819D5366FA69BD0879750BE4951980
-:104D3000724A7FAA00F73BECED93408FE8824E79F0
-:104D40001F5EEE4761F6885F17083A84DB252A0B61
-:104D5000841C671657C62D744FD545763D05FF67F1
-:104D600056E3BD4195FE52ED230DFF9A78FBAF92BD
-:104D7000F59F437E3C6A12F7B707989B99B40F8959
-:104D8000DFC990EB87C9F70C7AE8CFA506E87F9FCB
-:104D9000E60CA5BFBE5E13F7A6FBB0E3B0BCCEC762
-:104DA000B7C18ED7207E9FE3E95CC1474FDF652303
-:104DB000FDBBDCD6F626DE695278FCA4FE4756F130
-:104DC0003B2FC11CBC3F35B72E92DE7B2D2BF2B59D
-:104DD000812ED1051EA2C7B38829E5F5DB9DBE0F44
-:104DE000309FDA0D079EC2FDF1E5FBDD74AFB162C5
-:104DF0005FF13D78D7A2AC483F8AF20A87D386FD9F
-:104E00007B59533CED67F3FACBFB85AC93FC540A1A
-:104E1000FF9D05C28EB5BD48F47F5E9E432028CB22
-:104E20000CF5645C71D83A51F6C1703B43F87B02D3
-:104E30007DAD1F654F80FDC016625F54F6096BDEC5
-:104E40006773B07F96DB8CF7E154EA2E94E75C79C8
-:104E50000E5CD0BD7F154CEA0F7D79A346BF5B5336
-:104E6000E570CDBA92E7AB8E581129C8A624B8C414
-:104E70003B12F7897724E6F3F50A79532EE386AAE5
-:104E8000368FA6F55615E06962DFEBF2968D87D274
-:104E90005F05FF04BD744FBCCAE9B52584ACFBCAED
-:104EA00066CD70CF5CE5E30B853DAE1C4F98974017
-:104EB0005EB86D78CBA59CAB1588437317BA0C7E92
-:104EC000575E8FE218A664B2B7C43B3E1C6EB7189B
-:104ED000AF24A4FFF9CDC6FBF2BCBE7897A2308602
-:104EE000FAAB70F279C3FEE174129C1C0F84A7CE5A
-:104EF00007797F2E1A87E851190C5871DE2E47FC6E
-:104F000004CFCF7506AC18677E9378B742DF20C612
-:104F1000D1D7C7DB0AA12F599CB674E04FBE6BCF27
-:104F2000E1233958C5F182FB3FEA1E60387E2A240E
-:104F3000BC55CDF1463DAC79A315F498D3C7FDF926
-:104F40009B24DDE7378DA3FBCF55162FC5D7EB127A
-:104F5000BF7F5C11793FFC0373363D6675F3FCD56A
-:104F600085827F6F92789D9219CCA1F76956447A19
-:104F700000E71C6733CDAF1BBF8F707C687807C517
-:104F800047F8E57CE1471C59D526233D7BE011F825
-:104F9000ADDA5441EB6DA145B73943E1D87C200728
-:104FA000F77AE6F0F58D77779853A7FB369F3F3277
-:104FB0002B83E6C9E1045E633CAE49786F86F30952
-:104FC000F1B1E217753F588DB7A050DC135C50D893
-:104FD000BB7DBD675D7A49BF69E4F485DDBBAF7514
-:104FE00069C345233EAEAD4ABC0316BE4ED5FA5446
-:104FF000EB52AD53B57E9FB2FA82295A8F9CE1FBEA
-:105000006DDDCF7AC1D3B312DEB992AE1CAF874348
-:10501000EF156D2814F2A83CD3B8DED11FFABD4BB2
-:10502000958F0FE6E01EA0AAAFC62D97BFD305BE91
-:1050300007BFDD25E98EFA2BA9BEF17E4465B7BC1A
-:10504000D8B92E19F2629746FAEECA070FA5FF1BD0
-:10505000F4D817841E7BBA66DBB254D80D2C818C31
-:10506000D0F799AA82423E2CE0FA0FE4C542B94F2C
-:105070005F97A3DF573832A4DEC32FE4EA42BE04B1
-:10508000215F7EFFC26B1F8D71F5EC9F0AFEF9EB6D
-:105090007F6DAD7084E24BF0F9FD795D74EFABD2BA
-:1050A000617321CEB6B2A982E42D4BE1E7092D242C
-:1050B0004E2A8C0F2A9A347A37ABB27E54C0FCBF8A
-:1050C00028972B3794D1DB3C8A4EEAFD0DB59F2AF9
-:1050D000F8774AF8E74A3E7E49AEBFB9D56EDB4263
-:1050E0005AF76E5B25F85F96CFA9327EEFA653B7CD
-:1050F0009FB9E09E14798F85CE251BACC2BEB73315
-:1051000086F4D5D32B5F796F26AFF7E5A32D19D0A1
-:105110004F141C8BA41D6F81B4C72D947A2BA7D379
-:105120001B85217276D1D3824E952FFEEA53BC0F98
-:10513000559E29E5D983E27EF9FCD65D44B739EB6B
-:10514000375ADDBCDE7B856E839CAEAC2B76C23ECF
-:105150003D777D8B1572E0BD4281B7707E2F9771D0
-:10516000A90AAFD877B410FF85AA0FF9B78B8F7350
-:10517000FB8AC858C465A871FE5BF271655D7C024C
-:10518000C6ABACABF821CE3D4ADE87AFBBE3916244
-:105190003DCCE7FD615D1E1FE7A17BB6E5F2F7A5FB
-:1051A000C2EB9F9374FBB155BC239816DDFA1CC566
-:1051B000152C8FF2403E6467B707302EF81970DB6C
-:1051C0004CE2DDC1EC9AF6AF0007578B293E05296A
-:1051D000DE3B829A9CCCF3CF98C47D20C496204DB0
-:1051E0002A12FC00D314CA59523BBD7F16129F6984
-:1051F000E0571BDBBA1EEFAFD89218FDDE8BE24FF3
-:10520000D58FE24FC5BF7DCDCF517479F33BEE967C
-:1052100076883C4F06EE51CC7B6830BDCFFF5DF306
-:10522000B4C977F0BAE71B217EB7E092F9668B73B9
-:105230004BDFF3DD549ADCCB7CC3E7A9D6898ABD6A
-:10524000EEF62B340BBFC2718DEF5FBCDDF1159113
-:1052500014F7A5E6A5ECDE971B2FEF294A9076847C
-:10526000F618E891E5F2F7205850E4F1BD2CE4BBC4
-:10527000DAF7D5BB614A3E9FA893FB226B7F10EB08
-:1052800099D567D13B19C79A8FC7E0FD8EE3E30438
-:105290007CAADDED5671EF95C5D85C783F919FAF44
-:1052A000E8771F1634F5A773E4ADF55924176EF5AA
-:1052B000C70BBB83D4EF174A39187D7BC53D57A078
-:1052C000FE66B753E3E32C70783EDF4CEDF33DD040
-:1052D00007A33795D93249EF15E700E507BA5D63B3
-:1052E0003EBACF043989F5653A908D7D67D16671F4
-:1052F0000E986262EBE12F1CD4E89B940A39F1B856
-:105300007837926D31BEAB7430C7776311F016F603
-:105310001ED9EDD6566F7FC871AE6FC0CEB4C0E156
-:1053200023BDFD6D29278F6DEAA0F7C9155E2FB942
-:10533000A76213F7523B634C647FBBDCFB2A55D258
-:105340009FA4F846F9A39EC0FF5D093C99685F2BB6
-:105350003597D3BB3EF76C9A4069D5C6D247FD85D9
-:10536000B80FEB4B1E43705BC93E56553B41DC1FEB
-:105370007D26221EE79B0CAB3F23542FAD6AB997C5
-:10538000EEA99C6C89A47B2A139D6513E393E8BD69
-:105390005DBAF7A5EAFD40AECB25B5130CF74C1668
-:1053A000F03E1107FBE7D6688A2B55F747EE8ED201
-:1053B000BF5FD44FDC23B9D225EE8FA4527D57AF07
-:1053C000F670957EDE20EE2384DC8B993A87B7AFAA
-:1053D000A97D3916FD2C7DE483511C33B03FAD050A
-:1053E000DDBAEFC56C16F7621A715E821E99E09BFA
-:1053F0003907F8FFA599F0DFD778D5F85192907367
-:10540000C4AD8138D25BF520B3C19FAC3B19E9C56F
-:1054100027CDAC1E7A80D25FD4F747255E4EC635C5
-:1054200067803F166F7F2C03FBCBA918912FDF3EBF
-:10543000EB6DC82B7D6B84D0CF2D8CF4E14ABFD0AF
-:10544000AF5975827A1733721EFCB145D1E21D1E29
-:10545000797F46C1A5DE5B3D6511EFC5E05E0CF8C6
-:10546000FD134B7001E8FB09D75F718EFD819463DA
-:105470009F349BE97747FC7CA1400FF9A4F9E5181C
-:10548000DCCF55FA5AA9F9F75EBC47B3728FB8A7BB
-:105490008A77CDE9CD4A69075926ED202B5FB54EB5
-:1054A000C2EF8E70FD8BBED45882B6DEE8B744EAF8
-:1054B00057DDF9DDBBE8DC56B353E80F35AD1DA46D
-:1054C0003F287D44DD8B5BBAB383F409D56ED96E7A
-:1054D0008197DADDE27B05E2D6E5EF856AD9384FC0
-:1054E0006B94FFB460FEAC3596D07C05E53F2D5043
-:1054F000F6914ED207EFCFFB0D9DC36B9B64BF3C73
-:105500006F0D19EF4D30693FF13DCB81F662DF57EA
-:10551000E5B5BBE3A97DB0366A3DF679EF32870584
-:105520006963AD83F6FD2D75A63CCB080017E581B8
-:105530001EB75FC66FF55BFA9F91B01FA4B2CE4352
-:1055400078F7F5A0533F0A7E55BF67A9EEBD9C7F53
-:10555000FD8BE1E8FF9A41ED17F0C683754DED2C08
-:10556000F827DA8BE43C0ADA8783AFFB1D14F2F9E3
-:10557000492B5B4FEF075B7C0C76FBA0F42BFAFF0B
-:105580006212BF2FA1059F0DD5AF9286093DDC1792
-:1055900021FC8B5EB77E0A707C4FB31616E34CED90
-:1055A00032E7A07FF53B2A4A4F1D2FE573BA3C5FD7
-:1055B000D906A438C0C79AD74BF710D7161CACC46D
-:1055C000BEFC40A79D7E5F55C5E18DEF8C22BD35A9
-:1055D0007DC064DACF34978595F3FA070B4C41DC34
-:1055E000DB7A80D9455C803D4CAF3545523CB2B644
-:1055F000FF177F813C4F337F7508BF5392F66F1AB8
-:10560000BD7F39AFEBF327F11B33E52C504CEFE0B6
-:10561000C5EBA66190C35D933B744EB2079CAD761B
-:105620008FD8275828FCFBEFFC4B6C82A907AEF300
-:105630009D9FD3BB82E73BED64AF1DBF5FBEB71735
-:1056400006CFF91417C545F37AA4679E7798E89DAD
-:10565000B1F1FB0FD1BB79E3D5BB7A76E3BB7ACC52
-:10566000951E0F7B32D950B95290DC28E8764D9CBC
-:10567000F19C98334C9CB7728609F9A1F0D7653F2D
-:10568000F78EAEF5ACC3E5CA7FAF7E6FAA3A827ED5
-:105690006FAA6B7FD6B7BE9FF001F407AE176CC838
-:1056A000F4160EEBD7B37FCE907851FBB059F63F8E
-:1056B00043E26786C324F011F67B1B8A3F14FD1575
-:1056C000BCEADE91A21BBBABED4DDC0BE2F42A7C05
-:1056D00088119DAE203AFDE5DD75B8E63FC0ECEDE2
-:1056E000D0DDFF123A05F10ECE65D3A92D9C4EC137
-:1056F000C8C1D0131E11BFBF151ED7C8F218ADF315
-:1057000079E628B203EAF25D70BEBEDFC4FA56EB5A
-:105710007AD0E4F642EC8FC7F8D11B70B59B5AE9FA
-:10572000FBF7878978C281AC2D55C6DF8C845ED6A5
-:1057300028DF3FEEFE1DC3C50E7A6FE47C40BD7FBF
-:105740001C787C211F77D38C02B2EB9F6772BD5708
-:1057500077BF932DDE3FEE7E27DBEC273BC99C28ED
-:10576000B2F374BF939D23DEBB7E4D63B97887D6B9
-:105770005F66A7F8F8F077B2F93EF31CFC194F54B6
-:1057800047911F4ABD8F3CDEA9D7818EE1EF233FB1
-:10579000AAF9E62C407F850EEAAF7D4ED48BDB055F
-:1057A0009A83B0E31CAB8FA177A1155F2AFBF5208C
-:1057B0007FC7E3C093BAD7F907C95F0AEFEA5E9BD8
-:1057C000C2BFE233BF95D1FD4FD001EFCAAAF7D9CE
-:1057D000B5D5526EA8FB846F785C481F8CD7D70371
-:1057E000EEC6155C6E905DBCFD0ECCF7C93B63BC8C
-:1057F00080EB98C9F8FBBD2A7D7898C9F03BA1F3EE
-:10580000E47E354FC5FDD71BE3FEC3DFD14C8CF3DF
-:105810003D328CB73FAB7D300A1FDFFD3FE65EE3D4
-:10582000489E92EB7F44B4FE24EAABFB0F4A3F7CD8
-:10583000B7F88B74FABD91AF0FD1EF2ACE75FA028B
-:10584000A817992DFC017F486DA7FB1A7F98F3D705
-:1058500074B227AF16EF7F5E2E9C97DEA715FCB0C3
-:105860006A8188374C6375C4BF293DF7342301C76B
-:10587000FF6FF7697BEEBB4E1E7E82E22E7CF47BCF
-:1058800015E1F4181B71F065173FA9FC76D897B3A2
-:10589000E83E69DCC1556E9E3FF6D239914F3B78A8
-:1058A000C1CD69D3FED27991CF3F7801F7513F7BCB
-:1058B000A953E4AF62E4CF3AF1D257B370FFB4BF5B
-:1058C0005BFF23E835F362DD9BD85E3F5A73F3023A
-:1058D00037DDA72C4BCF13F7293F41F98CE4F9EBC7
-:1058E000E2B49EFB94268FEF8FE0DBF35F09FE7638
-:1058F0007358C127FF6CAAEE932A79DB975C54EBAF
-:10590000EE5F751F56AD63B6DDB3DE0A26F4FFD336
-:10591000F7549987CFEBFF021C7874630080000076
-:10592000000000001F8B080000000000000BB57C89
-:105930000B7854D5B5F03E73E6994C9249C80B02EA
-:10594000E104420C18D299BCC05BEA1D2089015ABF
-:105950001B6CB52018068D90D76442A82DB5D80CC5
-:105960000611A8DE0B5754B06827400035E8A001A7
-:105970002718EA00922252BF98FB37F2FD5FE10B35
-:105980003E90979310B557EF55B96BADBD4FE641BB
-:1059900022DAFE7FF8DAEDDAEFBDD77BAD7D86B196
-:1059A000B196F3D18CFEAEC98C1D3FFC9EA249641A
-:1059B0006C4681D16A90A034772BC6020EBB01DE03
-:1059C0007595F935B1BC9F36B45FA2D766C17E75B7
-:1059D00066EA973908FD72B1DF9F476BB1BE416F30
-:1059E000356430F6B48EB94D098CC5688EC8B84E92
-:1059F000CC2063CDD07FAC8131631E63297AC6B0E1
-:105A00001DFA312394BB06F97AE3121A56309867CF
-:105A10005C85D9DA9C81BBF53056C858DA28FF6816
-:105A2000DC5FDA4A3DD5C7687A940633638126FF86
-:105A3000DC0F33192B8E8ACD653F8052CFB2711F98
-:105A40004C13656D85F54AE4AFBAD2006EEC906CEC
-:105A5000B0342B36946F671319ABD7029088FF339D
-:105A6000795A711D6D77F51EE8D7939C66DD08E0C5
-:105A7000D8D4832C331FC6BBCA72D804C68E5A1C16
-:105A800039D62468679B241C1F9DC3C7FFAC2C7AA2
-:105A9000870CE3FB0FDF54E880BA3B0CCA01666554
-:105AA0002CDF3B7A81F61680E39442C902B075EC94
-:105AB00002ED688053940312B41BDDA31714DF8238
-:105AC000E7335A3ECC66EC174C627180970CAD639D
-:105AD000BA15CEEB2CFB44CF34D83EA02F9F0AF74B
-:105AE0006A854960FDA4A3704FB0CF8139319E1DF6
-:105AF000703E96A314627BBA6E20D602F7D1FF9552
-:105B0000B6CC63A671B13F87FA6BF8F7AF8C3DD77F
-:105B10002953BD0AABE5375689EED795697E0CEF60
-:105B2000AF3ED568A4B2F36A29C379B4E59977C0CA
-:105B30003C763D5B529E73FDF801AB86F695B10E47
-:105B4000103A86C8CBCE14F8BF28A6C26E369DB1D7
-:105B5000965F41C5BFF0763809D34FD208F896ADAD
-:105B6000C5DAB0FE76EC1F6C6776230B8E775AA7EA
-:105B70006E5D9B29D6433C2F639E49708434D620AA
-:105B800031B8BF54E627FCBC644BA073D11FE0E9D9
-:105B9000D94453CB46A45719E8328F4A6681322D37
-:105BA0001AD683F6B4374C1EA4AB5D264EB7991AAD
-:105BB0005EEED2F0FEFA28E6463A1D073083F26D1B
-:105BC0009BE377B6249AC74FF3C8FB6D488FA39920
-:105BD00097D64F616EDA8FDA6F2CEB3621CCB40397
-:105BE00059844F5933EC7D26D9666E463A0B34D929
-:105BF000D947DA607D203A765528FEEA71BC3974BF
-:105C0000DC2C1AA78E77AED2B08F46E1E1FD443F7F
-:105C1000CE4C8DDD9383E3D89B521ED677EBCB63BE
-:105C200082E37A9B8CEC23B8D7FFD3C4A83CDD6415
-:105C3000A1F5FF6F532A957F6B52A8FE6C533695E2
-:105C40007D4D56AA7FBF693A95772D8A2940FA770C
-:105C5000F966B28F8C42CEC0FF9C5E9DA32F04EEEE
-:105C60009D393C1DBD26E8A83763F8F66E6C077CAD
-:105C7000F6DECAF1D97F3FF3ECC820BA5C6B49B8B5
-:105C80001EFF30C284E7EB8F610BBC704F6F17486B
-:105C9000347FFF680EEFB7EA683EBB866DC5F16FD3
-:105CA00017E8F9FC133455D86E4FE0F3F666010C93
-:105CB000FB59307DE6CBC897F664A8CF0BC2BD5325
-:105CC00078BB7D0CAF57F7ABB6FFCE66E17428F01A
-:105CD000DEAF83F57388DE697EB5FFD7459C0F2361
-:105CE000FB7B3235659E61EE23C1C6FB135FC07D31
-:105CF000B8910F3242F8A25E21BE50E950A5BF977D
-:105D00006CFC9E330D82CE4127D0FDA16E40F99AE6
-:105D1000027C20D1BDD8199C679724F825921FA03A
-:105D20004439AEF283CA072ABDA7019F4909C1734E
-:105D3000FC28825ED5F2B495E3A53B39E601C26B3F
-:105D4000A7CE02A210FA03221310BEB3C00EE34A7C
-:105D50001E35370C27BFE2FED97B50E5C108F7702E
-:105D6000DDF9F5BCFCBEE727F986721BE9761879E8
-:105D7000F5B53581F6A3D26D92CDFE5F483FFD9219
-:105D8000492BC54169E2741379FEB70BF83954FA0F
-:105D900079C9C6B8BEC4734EBC5EDEA9E7193AE73E
-:105DA0007246722F338AD747E2573D5788DC8BB152
-:105DB0001506EF93316E0F8C057B606346907E0372
-:105DC000495F2E43FDB5CDAAD0FEFEA09109FFAAE2
-:105DD0003E19AA97E425F373C2F40CB3001E070E14
-:105DE0001B88BFFD1A56F50A8C6B2555113CF76DC3
-:105DF000362E0F06174CD2AC827D05FE6E76A3DEE2
-:105E00000A8C19382BC1F8C0563040C87EB0FF58F4
-:105E10004A66EC7ED029A897AE809C63598CC9DB7A
-:105E20003E3F2BC1BE976D9319DA350110DB328CE2
-:105E3000733D19E331F2718CC1B83A31AE79EBA7F9
-:105E400077217D9D07FA44FBE62353FD040676CFB8
-:105E5000EC6D3ABAC765317A0FD61FDBFAC48945B3
-:105E6000009F6F9714B4374A6533B5D73C2F7B70CA
-:105E70009D3A73E94509EC9C407BCB535150EFDCD4
-:105E8000AB63261857DA2E59FD30FF726F0CDE0C0B
-:105E90005BB645F77E5F76506EDE26F458D52EC988
-:105EA0000314C3AAB687B7D7EC0A87EB983608C3A2
-:105EB000FCB36C318964FF4D6636B4FFD896045448
-:105EC0005643723B92AE506D237EEC8D5C1E33F6D2
-:105ED00059F21D4097F2E1CFD3DF377378BE80CF00
-:105EE00001FCC9E7FCFED57BAB1732FF93D1ACC0F8
-:105EF0000BE7AC3F6CB2B8E160F51D329D23E08D3D
-:105F0000A37B7645F5DD4E7C7A48B6A01DB6C12749
-:105F1000BBB1DDD969DAA98173D61F9018DA9F4E1B
-:105F20009FC1C3EFE9EA326C5FEE3359146C3F64F2
-:105F300060328C0F00DE4C88C7717D847FC42BDA01
-:105F4000A7F0F763A928887F19F19518C457F3566D
-:105F5000BE9FF37B397E4AE5D55AC2578BC4524265
-:105F6000F0FC67CD8B43F8C27EB3B7FDB50BF1BC37
-:105F70000CF6675010EF32E1F93CE007E7D51FFE61
-:105F800028BDCF1CC4B70CF8FEAD3A1EFA2FBF01D6
-:105F9000BEAB987B1DDA73DF17CF69C8FF4964F782
-:105FA0009EFF03DABD31608F23E908FB38A9B6F7FD
-:105FB00078222C589170D9B902EA27A5BEC232C105
-:105FC0004E90E21D8F225F9F9DF39747101D3D73FA
-:105FD0005FB4215D34EBFA5A9F860A777CB4157959
-:105FE000B03F63FEF6D7609DE2842FD3F723BFFC5A
-:105FF000C96041727A42F023FE1901FF4EC6EF1BC1
-:10600000F0780ECFEFEC34F80D708FACBDC43E6469
-:106010000F4C407DECD5A39C2AD10F54AC407B1C87
-:10602000E6C375242023E4EBDACE3F9F96609CA460
-:1060300024B2C5081BCD7E19E769D35D193A37CC68
-:106040002359FE42FDDA6C13E8FC13537EA4A0FC36
-:10605000695EC81C5113BF4DCE3392F3CF0A7F65E2
-:1060600044FB6F0479AFDA7DCC3D361EF90BEF822D
-:10607000F30F973BCBA733F127F842C0556BDCB148
-:1060800046E8BCFC666B2A9EFF63A4B358A4BF53CA
-:10609000DA51B0AFBA5689F0568FF483FE15EA375D
-:1060A000A8EFF70A39F27C77F1A8442C252B702A47
-:1060B000ABEE94AD7E68AFF6717ABA8E6E84FCA8B2
-:1060C00069E3F2E33A3A6A0338C44EAB47BA526125
-:1060D000C0F7C9A0FC987A0DF6FBF23426F4955B64
-:1060E000D05B4E5C1FD0CB2053E22C39217A4BE29F
-:1060F000F6962A576EDA0AA23E64DDC91E23D386BD
-:10610000AC7BF35E4B183CD59B1AD6FF073E25AC03
-:10611000DDE6CF0E6BCF3F610D830BBBA787F59FED
-:1061200076DA1E06DFD25716D6FF8717CAC3E0C13C
-:106130001C38CF3076C7901E4A95C2FACF514C61B9
-:10614000F3CFCB8E0F8307CDE27E841DA8DAA75F45
-:10615000D8B81D1459AAF7FB136BF83AAA5FFCD301
-:10616000E9E1EBCDB787AFF75DF1B21BEC7E2DD83F
-:10617000F57B413F62F902D8FF5AB0EBDBC0FE4726
-:10618000F825B0FFB1F482FD8FF5AF80FD8F703B35
-:10619000D8FF081F047F05615F531995879ACAA924
-:1061A000FE46F7D725D63D21D63D29D6FD47EF49F6
-:1061B0002D9D6593345F009FCE4CB8A847396C6F16
-:1061C000EC2BC538C0C05B32DB810CE2F09C684A26
-:1061D000447D348AA1DDC2CA07DEC63845FD818907
-:1061E000968D0AEAA1FF7C07DB03EDB282F2FCA8E0
-:1061F000EF83589CE7CA17C087F938EE8358F48FAD
-:10620000EBBE64046F847605E039FB4130903D03BA
-:10621000720DFB67AAB047CFA02C6FDBAF477CD4D1
-:10622000EEDD4FED6F7975E1ED7B5BC2DA2DD81FA6
-:10623000CA5AAD87FCFB4B3E753E3FF5AFCB94ECA5
-:1062400068175FDAFB9FC9CBB05FDBBBC9F77DCBBB
-:106250007D7F72F0C51C94EB4ED0C37E73701E67B9
-:10626000874EC07CDF7599FB4B135011B4496C12FB
-:106270001457D826B60AE45DADAFB50EE5506DF6FD
-:10628000221DCB207924E20D206DD15E42E71EEE67
-:10629000EF8AF7D3D8FB60DE37BCC76FB723FE3A6F
-:1062A0008FC5E2BAFDED72983F73771EB75BEFCEF4
-:1062B000D313DEAEB41F8B55A07D83F718BF6FAD2F
-:1062C0009FCE7D54C0FD50D23DFB643A77F5171A3E
-:1062D000BA7F75BEFBF3649A678E6F520C9EABC794
-:1062E000CBD773E529B4CE9CCCA595B8FF93A90B69
-:1062F0000B65B2F34030A35C9D32AF15E303B55E8E
-:10630000D93E9CBFB546CCDBA5E374F856E6AB5D41
-:1063100063803E4E968DB291CC17FD7E93C7EDF112
-:1063200052BD2313F5428F5989413A7EB86C620CF5
-:10633000E2F52896585FB653EF80B2A69DAFD763BB
-:10634000E98E457AEB69CF97D16E51E75B89EB1601
-:1063500086D0F510DEDC84A72A4F8B19E709E28F7F
-:10636000D7BBF2B81D7ED2F3EE5D68A7F464475B3D
-:10637000112F5D7A46FE6D2DE015F5414F675A0BE2
-:10638000DE83BA9E4BE0A33F5B43780DF874A2DF37
-:10639000A25616D64FC7F1B52B7C3F16CFB97F5BFF
-:1063A000847AE959B0ABA1BA4ED7908CE7FF787BDD
-:1063B000F8FEAAC43DD7E9FCC9C921F45AD731C4B3
-:1063C0002F66A2EF0E953F14C2A78AC79E6C6EB7C8
-:1063D000F5A41A3CE82FD6ED6F25BABE3EBED39D7C
-:1063E00081767EDAAF8D1437BC913FABDA01217E26
-:1063F0000F433F4E5736B1503321A8EFAFD9EC2FA2
-:10640000E615A23F544EFE5E0F1B5886CADF897602
-:10641000701CCADDBF3D85EB0EB683BD07EB3A8D20
-:10642000BEB91F829D35680546817D0F6ED7798480
-:106430007F6246FB7499B04F3F561C4532E857E7E0
-:106440001A0D9DAF2E278ADBB5424E7EB23FE3A7E1
-:1064500048AF7527648B11ED50F05B086EE3764111
-:10646000BD37E3DF67A0BDDDA6233B40B53B9CC243
-:10647000EE382FECD9F36B06F464AF1E96D813B048
-:106480008F2ADFE6AE346877E6CC257BD529B75175
-:10649000FC71F9D670BBA0DA130ED7EE0D879D11F3
-:1064A0007683EAB7F5E40DD90F93D1FF289167A45D
-:1064B000201F7C2CF0A9FA232BA75A5390DF3768B2
-:1064C00095B96A3C00EFC975F8D56ADCAFA72ECA4A
-:1064D0004A7EC1AA43749FFD9F71BFA33F9571FB84
-:1064E00088F17BEDF771FA76E924EE6700B9D27C8A
-:1064F00046C9B3069AFADD83B12497182B437E6808
-:106500005CC8FD483BC65CA1DC9727E24511FAF266
-:10651000566D9F1C1F221F3ECB9B40FB2FD633077F
-:10652000EAA9953156D25BE38DDCDE2E59EDB5211B
-:106530001D8C07FFD81012CF1E6F1E90B0DFAE87E4
-:1065400078FC5CF5EFE76B2DBAF810BD0792276C6D
-:106550007E90247CFC8DE6B7C0FCE6E0FC70DF7129
-:1065600078DF9F1658491FA7CF67AC9BF8B181F819
-:10657000513DCF15A0B362A0338C9920DEEAB61F3F
-:10658000A138B09375933F521ACBF7518AFB41382B
-:106590008A97967C2E37CAF3F9BD350B58955B6FF9
-:1065A000E5DBE3F3A1DC9BEF48CAA77A0BD1E54A10
-:1065B000412B60A7A4F40D23771BFFC2FDAA4F81D6
-:1065C0000F90CFEF699094CC303B88D3B78B57B105
-:1065D000CBCCDB3B03EFC16DEFCE4E463F8AF3D50C
-:1065E0009255262533844E5D48E7702F5596EA1F55
-:1065F000A3DDED5895AC60BCDF85743F01AF91D34E
-:106600007522FC43FFE23A3AF786C3F0B71DE9ABC7
-:106610009E19ACA8475CBEC876AB16E33AF9F9C040
-:10662000073707F9205DD0658B43F2A0DC6FF94A8C
-:10663000CBE3588B258A5BDD09954897F487FDAA43
-:10664000667A70FE3B01447F886D4924BEA1469066
-:10665000233F17E7BD53EB3F827C7C5CE7CDC078DE
-:10666000CA7127CFEB2C646070807C59CCBAA9EC3E
-:106670008DAE3FE0A7C9DDE3D06F7ECF61A0384E7D
-:10668000CBDA1D31284F73D95ACBF96C54EE6CEF2D
-:10669000B5FC91ED0A2024765EC50BC5853611FE4A
-:1066A00055BCEECDB7CF47FC8F34BEF6AF076E4773
-:1066B00097A2F681567D0A279BEEECA220FE5CCCC9
-:1066C0009B8DFB55F135843FD8F358B887056CA0F6
-:1066D00008FD1A156F46F8371CDED4FB4CD70DFCAD
-:1066E0000CAF0CF412C997487CAAF75BCF1A743C24
-:1066F000CED5F0CE42E87FF75A8D82F6E175F8BD2F
-:10670000011EFC26DEE48F91C8DF1C092F2A3E54AF
-:10671000FC9C8EE7E34EDF23539CEEFF355EDECA22
-:10672000773CFA6DFC18C97F23F1DB9255117C1977
-:10673000C17F2ABE1CAB6289CF543CD6298CFCD6C3
-:10674000BACE18AB8705F167867F883FCC53503CA3
-:10675000A65D62CF48DF850FFB28AF11891FA00D12
-:106760003BCAF59D11FCA7E26D24F9A3CAAF33CC57
-:106770007FDC22517E80F3E7AF0C1ECC2FAAF901FB
-:10678000350F704CC8BFC8F20CD81D9877D998DD6A
-:106790009384F65AAF5E9D87E71FCFACE91EB70220
-:1067A000C69F99C9CB5EB4D342607B148FC39D1939
-:1067B0006D70E3BD9D9126CF423D7E46FAF5ED1CFE
-:1067C0004ED12B082F4C996501B857A7C6ED1E1660
-:1067D00072D843E59985D38AA99FC4DEC4FB5024AF
-:1067E000564EEB48524219ECE7CC0393F29A59F01B
-:1067F000FCAFE4737BD62BE4F9501CFB3712C5B118
-:1068000097800AB060BC7DD6D36513A0FEEC8313DD
-:106810006D94FF6B0C5F1FF56806C50737D37CB717
-:106820007E31A05B9A13DCD790FE2BBECAEB2B27E0
-:10683000913F512570684F98CCFD58CFC438D4474C
-:10684000AA7E1A3CF1AA39347E7911F417D387C095
-:10685000931F4F0FD56F4776FF3E0BE7A9D2BB734F
-:10686000AD507FA1E50FE9680754ED7E348BECD283
-:10687000DD1BB2D0BFA8DAF1FB2C3BC1D10EF26F09
-:10688000B4FCDC97F7DDB27363881DFC6021F70B65
-:10689000161B8F94A07D3AF7E64F1EC178F8A40727
-:1068A000258A8BDDC3BA1F41BD5991CDF9886D3161
-:1068B000925C87F928EFD83AF927BB509E9FCCFE0F
-:1068C000405709FD4C055ABA8F0AE6792C05E36159
-:1068D000EB258A8705FB8FA33CE6D2B5923E3511A6
-:1068E000F561BC4D56705C3CEDE3DEF5B62EACAF09
-:1068F00058CDEBE71A3CED3D38CFD37A6BAB821322
-:10690000954F280FC90B9B0AB8DFB5E43189EC71AC
-:10691000759D494F25B7849ED35420F4F98C6EE2BF
-:10692000FF9F0ABCFC78F5BB6FA62A984F72C4156E
-:1069300040FB3B4F9ECF44F9559C703107E97C9258
-:10694000DEF14C359E7B8781E28705B969720AF4D6
-:10695000CFFBE5CC27B05CB27AE933D51807DD6A06
-:10696000243F4ADD5FA3A468D0DF3CD6F28B7BF1E5
-:10697000DE2E3C69243BBAB1E5A614360C9FAAE58D
-:106980001EC0BF92C5D8F34D462A5F6CB230058E4B
-:10699000B8AF2995E0979B142AD9024E5F8DC25F4C
-:1069A0001D69BE7CF0F715905705EB613EB0376D61
-:1069B00026FB143CE7A429CE1D1BC4B926C1789B35
-:1069C0003B6336DE43C186155D688A2617F0FCE21C
-:1069D000DB3DEBD3C98E5E7DEEB96A685F5A509E8F
-:1069E0005F00F76DDC7E95FCFC631D8F56505C7F6D
-:1069F00087819F4F9CFBC2935929CF60DCF52D1DE9
-:106A0000F9DFAEEDE79EDB00E57D8FADD087D2FBF1
-:106A1000773DAF4DECE7467C35D23D7C7FBEFA7DBD
-:106A20003AF1CF0EE0AB9C7F9CAF5CABD7D0FD3D85
-:106A30005A507E37DEFB059D3B1DF9E9C2E41F116C
-:106A40009DBB0F4B74FFAA1C57C72F10E7ADD5781D
-:106A50001F237B50C8F1CFC1F3C3FB3DD2F17116A8
-:106A6000DAC39FFB167EEBB90F3661061DE35A466B
-:106A70002A23DB8BF48E8956385F9186DBC191ED3A
-:106A80000F17A871719E6FC73F8C0BD709FDE98462
-:106A90008DC525A0FE93FC51B998E7B8EDA216FD6F
-:106AA0002FF0EBDE0FB72FD9FB217A7CA4FDDEA8F7
-:106AB000ACC779B441B93BEDB486F943F4F62D7D0A
-:106AC00051CC1FB2EE90DF01757ACCB3748C26B92D
-:106AD0008078C3BC4CA063F20E842FEA391E0307F2
-:106AE000C1BFE27115261705CF79B1E3722ECAD95D
-:106AF000C8F3D61FBA4CF451E77BF4AA44E79F735E
-:106B0000519B7BE3F31FD97D3917F17751D7578418
-:106B10007E5440DF978B78A87F9DCBF3EF7B0F6A85
-:106B20007DF57A3D8FEF4916F2074BE42BE4C7075A
-:106B30004E703FBEBE6327C9D3C14E1E4F7169BAA6
-:106B40004B5330FED070AE0BE5D9602AF7AF607EB4
-:106B50003BDEDB8C89420F6A07D2E7835C3B2AF27B
-:106B6000B5AA5F7701F9578FF378EBE83D526E34A1
-:106B700043BBE212F233D457ACCA5887747EC19338
-:106B8000849120F676EEFFD453FCED8D688B4C7625
-:106B90002BD486E06FE81C1E993F9C61AA9F1ECDF6
-:106BA000EC21FD5C7AE5A7E41F9FE47932D714CE8F
-:106BB0004FEC10E727E7DA23FAD490F95E52E58725
-:106BC000B01FE7BEF13FC497A76CF65328CFA25180
-:106BD00016E27CA9711E4912FD8A82794073A7F0E2
-:106BE000C7CB646A77F964361AC7A4C650BEBE8C98
-:106BF0006DD2A2BD3B977967F077327DFFF643688F
-:106C00009FF7869C8FEFB1C07EA6FC71699423B379
-:106C100011ED238D24EED55B303F549F15727B6BB5
-:106C2000862C911E1B181D4D76CA9C05CEC5B85FDB
-:106C3000B55F9996EB339887EC2CE619C8C57C268E
-:106C4000F30FE4629E53ED77D71BD10DA41799B7CC
-:106C5000E0AE9075C61472BDF929E69F419EB84416
-:106C6000FEB344FEEA29F4A31A0FF33C61AF26E316
-:106C70003D7CAFE5867B46BC5E06BCDA51FF3898AA
-:106C8000DD8EFC3335C983FCE3DA27317CB756DF70
-:106C900061D881719D7A5D5F32D2F306DF5FF5487E
-:106CA000CFAE03EFEA95A9389EC781C05ED7E0FD5D
-:106CB000BA84FE72FA6E7A0FE36ECE135C8B3AB52D
-:106CC000EF925F5FDBBE9FFCF73AE627FFBDAE2D7C
-:106CD0009C5E0653799C3D923FC6142A617C3167C5
-:106CE0002BE78BBB64D680728E89B8E99CD414B232
-:106CF0004782E3849D285F7E04ED97FE09925582CA
-:106D0000A9FAA3DC6BD12E7267717BA6FF4F2F16F9
-:106D10002C23B9E229F819BE8B11F6EE9CF59BB530
-:106D200072C87EE674F238617F14AB3A48F8768C0C
-:106D3000453CA4E7958F2DE4EF6472E99D8F86C7EB
-:106D40003523CFF1AC88E39CC4384F4E70DFF3D2CB
-:106D5000D2B81C631EA29F2E0D5F5F7DF7A28E5FCF
-:106D600021E869C81F92787C6A24B98279944A9193
-:106D700047A91479944A9147A91479944A9147A94B
-:106D80001479944A9147A91479944A9147A914799E
-:106D900014AC3F895BA5F7703B9F417AE8421E1B0C
-:106DA00013847B1322E031E1FD7B13A470788C44C3
-:106DB000FD8B0B773EE3CEC138A645C8252506EDF1
-:106DC000AF0B261E5FEA8871CC2D84FACA39CDBB81
-:106DD000F97B443BBD67294E58B818F96B30D1C0D8
-:106DE000500EB90B1DF3111F274ECCCEDC4CF2D147
-:106DF00064C53C77EFDD37C7515CEE2D99C9B0E42F
-:106E0000CCECFCB50500CF344B44B720277E50AE08
-:106E1000FA9330CFEC4E9ECF2891EB2A71FEC6D16B
-:106E2000A67C8A6BE53B161586C40F4AC72CCF4457
-:106E30003BA84BA7BC87F154F75F740CFD2835FEC7
-:106E4000A6F6EBCD9B598DFB9A933D716D1ECA1B27
-:106E5000602E946F763D6BC37DD935D15233C92BEB
-:106E6000458BFC5F2DF03D4BE1F6B05FAF6813D072
-:106E70006F8F9A99E85678BEAA52E4AB2A45BE0AAB
-:106E8000F1730AE36650BE03F55876433D9691EFE1
-:106E9000B9761794AF24BA6503E9A1EFC1E6225F82
-:106EA0007139938EF4FC8288C367178A7769F9E594
-:106EB0000FF2715E9AA756C4DF2EEBC2F378EAB8E0
-:106EC000E07846E51D3FE0F299C5E9F97BD7B1CC02
-:106ED0008DEF69EF786D34C593021E8D5B17073017
-:106EE000F038CA2FF61AF76F592AE7973B5E4DA183
-:106EF0007ECD220EEA4CE8CE4A40BD2BF84A850FE3
-:106F00007EC3DFF938F30086F275899FCF79477722
-:106F1000563CC001C9A4C1F8B873076FEF117CE7F4
-:106F20009C20E613E761466F3AE2A3FFF06BE9F7B6
-:106F300002BCD1EC5FC6E5BD3F8BE434F367E17B77
-:106F4000A1CB92F72CBEB7FDF5C17F5984EF6B2F13
-:106F5000EBBCCF21FCDB8333382CED3F6B096D4F4D
-:106F6000F2A6E37BDC5F1FFCE1227C9F7B3969FF9B
-:106F700073F1D61058F7CA596CD73F3C635131F4BE
-:106F80009F67F09C6842BA7999D39769DF81F3785B
-:106F90003FB51DDC5E9FB5EFC09557501F1F88A100
-:106FA0007CBDAF3083EEBBB963CF63486F81FD3AE0
-:106FB000E2838D6D7F7DEEB7D4CF40619479066F0B
-:106FC00001865CDC457FBB1BF7352FDAFB19C29BC2
-:106FD0008B6EA37DCE1BC5F9F9A9A2B98B903F0397
-:106FE00007F6FD0AF96F5E1C18B2B89F174D849F13
-:106FF0009A572717631C2010D35D81F3D7BF60B069
-:10700000229DD6BC9A320BE302C70B797CBA7ACAAE
-:10701000A674D4AF9A43CFEFFE2DC6295F30517EC0
-:10702000C695C0EDBB1AB9A56805E16FE76E7C3760
-:107030001278DE4479D26A9803D7ABDE3D89E2EA62
-:10704000AF7FFD4105E2A144DEBE1BEB3FDB65D215
-:10705000E03DF4E8ED713F423EECD1919F592DE0C7
-:10706000EADE517C3FD17DA584BFC44DE9A85F6BAA
-:1070700046FDE676DCF73C79D373E8E7B03D06CA17
-:10708000155C7C1EEE0DC65D6CD5D12BD5C0F331E1
-:107090005AA497CBD2A68A6770FE56DEEFB2691368
-:1070A000DDA7BBF52686EB413F86F2EAB2B439ACE8
-:1070B000FE62EB9E5CF4432FBD308FFC5195CE55A4
-:1070C0007EA9D96508D387240992C57B0952B36E7E
-:1070D00066063D5B2DC04B07B7059E61C1F197DA8F
-:1070E000747E3DDC51B581ADC5F7C12A3FD4A4DD26
-:1070F0005686E7ABD1B464A1BD529DDF57817C7148
-:10710000D1C48CA9F88E4EE8AB9AF635F3D1EE1DBA
-:10711000693FB1E25DDFE7820F3FF7993CA1F9C11A
-:10712000C8F26F4D4C3915F26EF89E0603D9EEEA9F
-:107130007C6FEBBD75E89FD52770F97116FAB781A2
-:107140001C331771B9B76455787FA988BF4BACD78A
-:10715000F765A1DE53E7FFA650956B7D5928AF2256
-:10716000C7CD9385BC7951227953D32E9D93E19E4F
-:107170006A8C6E0FBEDFA94167929F537B4DE2E39D
-:10718000528BC4BDC3D8A78B3268DD9A3693DD0419
-:10719000E36AA3FA62D11EAA8BE98B453B277048AC
-:1071A000663B04BA1293057E26089485C41DABBDC8
-:1071B0003ABB2977183CA3DD84EF73F0BF61FDB6BD
-:1071C00022CE2755BE685A8F59FA8A904EABB687A1
-:1071D0008FC3735942F82FE0DB991CEA8FDBC4BEE2
-:1071E000FBA573C427FD5FBF9F8E78AFD1B0B59864
-:1071F00047BC24F1EF1E00A6EF1E2E897C64CDDF74
-:10720000CD51482F973EAF23BE0D487D24D7CE1CCD
-:107210005C407229A0EB23B9D6535441F22110DF10
-:10722000578172EACCC17ADE3EBAAF4281F64E8413
-:10723000B17D1C237D7FB9E801921FF364FEBE81FE
-:10724000EDD459781C687D6F13F9153A25D4EFBE3B
-:1072500052A4E66DF4C173CB41BE0930655F3BF2C9
-:10726000619599E239603FB5BD8276DEC2642BC676
-:10727000C5AB701CA7037D68FE2F31E1CB65889FED
-:1072800045718E3B8B308F9DD347FE035035D9E936
-:10729000F57F32901FD9AF1BD88D722A37CEB1B08F
-:1072A00008F651A7EF5E87A1A72BBABE2ECCFBCD67
-:1072B00095B93C627B385D057276F2EF2444FEB0EE
-:1072C000BA88CB5FD05BAC05E942E2F83DE67BF5DE
-:1072D00014CA9540F74492C7917C73D1F7442CCAE5
-:1072E00087D3A0C7DD217EFEE9A57B284FBF00DF45
-:1072F000654079EFDA707A18FCEA67E4EFB1C742CB
-:10730000EA910EB784C3917484F4E80F933B6EA2A4
-:107310009B3D82AF6A6775D7E33D0CC177002C8730
-:10732000C04723E088FEAC9CDB097BF0BF61DEBA7E
-:1073300071FE5EF2CFF7F177B1CDA0BF083E104DE0
-:107340007963CD3ED04F895C3FA15EA88DEDA6B894
-:1073500054E08081F2230F777C4CEF19810E29FED7
-:1073600052DBF15A32FAED3EF41392480F26D33B2A
-:1073700095031DC9E86FA8F5751A6F96788F4F763B
-:10738000BA5AEF94FD59B8FF5AA93B17DB7D851611
-:10739000D11F60196146E7A89338BFB30E99E4790D
-:1073A00024DEF60A7A05B9904BEF2C0EF1B8802A4C
-:1073B00007AA853C398AF5399CEF2D6A5E49C2F7E8
-:1073C00072D1C3CA879B8A547BB881E236BB8A14C8
-:1073D0007EAF623CCDCBE34AD45EFFFAE5DC0939EF
-:1073E000384E11E342E4D0C4A05C41FE4F25FE7F3D
-:1073F00058970CE7AA794EB236A39C5ABCA614BA89
-:10740000B3E5DA15A5142F13EF3F23F7154947F617
-:10741000228EDF1A4D7C4962C87C97C05D4FCD2318
-:107420003943EFE8EF4F7CBC14E313BF58BC99E835
-:107430007948DF84F2399E673B97E3C836D734D763
-:10744000D3F1F286967529C3EC23729FD58E96D21E
-:1074500064E5FA7A75BF974CEAFE66E99242EF61FD
-:10746000C19AD22428971BFFD17BE0E7BDD461F0FD
-:10747000A35EAD5EBC625DDC3074739D3ED81EA21F
-:10748000BF26207E3D94D71869FF91659DE4EFC526
-:10749000381103BE6A25FE027E09D10B6542BF0E7C
-:1074A000C51BAA968E47BF9339968E473D037C55E0
-:1074B000611DC6AFC42F4B34F476C34D65E47E3EE8
-:1074C0002BE271D2B222CE2FA76CF66F50BE8EF493
-:1074D000BD85619AF4ADDF5BA46906DF417E4B4B4D
-:1074E0008E51300F54323B9AF73B6CB260DCA6FFF2
-:1074F000F09714D7ED7FC4BC80E70BCC6C34B47725
-:10750000A54EDD11AA473CD3385F461770BBC59521
-:10751000ADFBF6B8504ECC505C88EC869C68CA93A4
-:10752000047C9F92DEEAEF2CB4603E23D00DDE2176
-:10753000F093EBEBFF4A46FD1AE8FC88DE8305BEBC
-:10754000FA98DE896D10EFF48EFAC43BAB6E258697
-:10755000BE8B2BFBA014FB6D1465303EC0E35A6A52
-:10756000A9FAFF21FEEF946985C3FABF090E73687B
-:107570005C4049192E8E121A17C8D4F2B80096181A
-:1075800017C8CCE4710184312E8025C605B01EE3F6
-:107590000208635C00618C0B208C71012C312E8001
-:1075A000F59F89EF1FFA4130F178A599E4FA4A7CFA
-:1075B000DF0EF7B7F230CF3BAD6C95297F8BDF3F05
-:1075C000A07EBBEEDD4CBB7837E3DD4C793CD701C8
-:1075D000D98A2872E9068E631CC7B55FB2AE41B97D
-:1075E000D2B480D6DFD059F8DE62AC6FD559350AF7
-:1075F000D111C7638B44EFF46B3A5B29EE549C7254
-:10760000584FF56D12C338E95D06EEE73A65A8CD2F
-:10761000A33C28D9C14E4337F91FB57B25A532F4C9
-:107620009DC6F4AB2407D47CF232DEC49C5E935238
-:1076300039CC3B90A177E7E2DDF432CC33E37B71C8
-:10764000F92B7AD7EF04877414D2E156FEFED902E3
-:10765000FF88DF23DE35D574EE5F87EFA122F3CDFF
-:1076600043DFD345E49DEBA789BCB28D7F5F51F624
-:1076700064E5BE03B0DEE02603D91BEE42C703D3A8
-:107680009230EF6FA7F8C8F1C326F28B3EDC7C5333
-:10769000587C84E53B1E9C46F9F9B114AF68D44987
-:1076A000A48F67974D4CC17B9C7D42477AA737AF2B
-:1076B0007C35F66B9CAA503CAAC4C01EA079C47B42
-:1076C00029151F25CD924703F05266A577F64BE0AA
-:1076D0009A305ED9AF33AFC7774D4B187FE7A0D252
-:1076E0004DE36689E8060304789F15E23E9774FE31
-:1076F000F94B7CC7709F81DBAD691A9EBF4EDBC81A
-:10770000DF33DCCF1C7AD4B3CB91BA64D28F7FEA5B
-:10771000837A47F4D8746E972B2938FFD2933A7A3C
-:107720006F5B92F2932C07E9E9627AC720F917C9D7
-:10773000D76E1E997F22DF311CD771B902F748FE40
-:107740005017D225C5651C549E6CAAA2F277E27B25
-:1077500088EBDFFF0F9C453F312D25C68A726EC432
-:10776000EFDDA2BEFD7BAF17C4FBB5344D4FBE822B
-:10777000F7F177B315EF437D2778CA56BE1FF16442
-:107780008F656E0B7D0F061210EEB5140F22615C33
-:10779000DB6BC7EF8E060E4B167A977C9D7CDCFC6C
-:1077A00008BE1371654A1649C1F8F7A69264D877E6
-:1077B000E9840CDAB7CBC7E3A37443C9183FE7F8F1
-:1077C0004ACF731C9B5618AC9F27F82600FD399DA5
-:1077D000FCD083F4F61DE2A6BBB0BF9B99E87B6AA0
-:1077E000FA83FDCCBB791CC54F55BA196C4BD981B6
-:1077F00074F39E90FB8B17BFAB43FDDF9BEFE8C19B
-:107800007D54545E7D2499CE377CFC4A7DA71E1999
-:10781000BF0A959FFF3FDEA79F6A6AA0F29DA6550B
-:10782000547637B9A93D44FE5F1A41FE47C63FAFC3
-:10783000227F47C63F99518923FD09FCCDE3CD1135
-:10784000F1CEB251F7AE87FB9BBD456FC52A35FE21
-:1078500089EF87579A491EFCF7B461E39EEABD9908
-:10786000294E3AC84C7978FFB3B2276A35D0AE9D1D
-:10787000CEF1A7C61D913FF07CC81F58227F68B586
-:1078800041FE78560F2C5CC0F5BC9BF4BC89F0BA65
-:107890006E0DC80F80EF639630F97125427E80C36C
-:1078A00071377D57D56960182754DF51CE82E28B3E
-:1078B000BC61E48997CB937151DEE7E97BFFFA283D
-:1078C0007A9F7B5CBC873BBE81BF87AB64E5B4EE2F
-:1078D00030722516F171DFA881B37F80FEF7FDDEDF
-:1078E0004CF6CABAD1CB8AFE19B9724D7CD7F234A4
-:1078F000FEAE80F6DB7E57E03109F3A18DF7301B39
-:10790000E259FD5D811491CFFE1EBF2B306D7AE1EF
-:1079100077FF5D815BA78F5F1CFABB02B7FA323835
-:10792000ACFEAE001BBF7884DF15983D3DE9FADF61
-:1079300015B86D3AF71747FA5D01B027CB705C9226
-:10794000CD3E07CB34B1CFC8EF694F8AFC5D97C6F7
-:10795000B118CBD258B796EA359E02FA0E5EE3FD17
-:1079600025F981F98E9FE3794B9FB04DC90638CD3B
-:10797000E02539D99B67BF13EBAFD9EC77E13A919A
-:107980007173C42DFAF7B09FBBB13DF2DD958ACF7C
-:1079900015D3B9DC6814E58CE6E1BF276F9CCEF304
-:1079A000F237DA37ECB706D71BDAFFA6A505B81F02
-:1079B000D86F2DD6C37EEBB064E684B0EF53AFA78B
-:1079C0003337D155E3744E5F20CFE67DC8ED412AB1
-:1079D000B3B49E78B41FC73CE489C7FD8E691930E3
-:1079E000E177107F740F9850BFFF71F58009EBFFAE
-:1079F00068E7EF9523E77F793AF703B2660CD0F892
-:107A0000F168E3937D3E108FF65356D587EB28DF60
-:107A1000B27732E997F142BF8C7F6882AF0FE86D91
-:107A2000FCB638CA67B3E2446AAF31723EAD79A89A
-:107A3000F2E00185BEDB9AF76188BD33D903FB0E06
-:107A4000B3BFB483FCDD25C0784F7B750423CDA282
-:107A50007DE564FCDDE5182137D04E5B0C72C15921
-:107A6000F5E69794F7C7F1381FE66891FE7CBA41B6
-:107A7000F17D9A05FDD0E50BD674915FB875A85ECF
-:107A8000F899FBD7A1DF0CF65B587D4DE5912ED41C
-:107A900037B57BC3EB9D0D57C97F05FB2DACFE9E13
-:107AA0005F9ED3F3DF2F08AF07FCEE45BA54F17B9E
-:107AB0005CE79D8C7EDE71679495BFDFF7D2EF9512
-:107AC000EC10DF3FEFFC8F599C6E04BE61BC377435
-:107AD000FCC8F4D14CFDDDB35836F2C38D4A552EA7
-:107AE0000DFDFE899EB929BE373786E48E4BF855C9
-:107AF000F59516D2F369F546925F25729415E1A1CA
-:107B0000DF3F2993859CF212FFF7DC1E4F713C3A50
-:107B100000C2095329EF93DCCCE1812403C9871209
-:107B20004D79DD1E28DFD4847FC7FE2CCA0719F9E2
-:107B3000977F87E9D27BF977E25AA510FDDC66C909
-:107B4000BE0DBF7B6C96441CB1DA4CF9827E8C2F43
-:107B5000C279B6C47BB62D8375B6DC9943F6713F06
-:107B6000E3F2D4BD80E7ADB6C4972F5E81ED0BA7DD
-:107B700050FBC16F263E5E80F653759415EDA72D20
-:107B8000366E5F6F999F4DEDAF4BCA1A3CB7FB2124
-:107B900046EB6C99CFCFBDE5F171E2FB0B8F09F994
-:107BA000794B8B7D34E6A366591C17105F63443E06
-:107BB0006E4B06D443F99454BEF07E9C672ADFEFE7
-:107BC000EF6C0AC98FE30BA73CBE5B2135E2C7BC53
-:107BD000906B6E0CF9C1FF0BB81F749470470000D6
-:107BE0000000000000000000050207000000000087
-:00000001FF
diff --git a/firmware/bnx2x-e1h-5.2.7.0.fw.ihex b/firmware/bnx2x-e1h-5.2.7.0.fw.ihex
deleted file mode 100644
index 280bbcf..0000000
--- a/firmware/bnx2x-e1h-5.2.7.0.fw.ihex
+++ /dev/null
@@ -1,12847 +0,0 @@
-:1000000000003BE8000000600000068800003C5053
-:1000100000001968000042E0000000AC00005C50E5
-:1000200000008DE400005D00000000EC0000EAE844
-:100030000000E3000000EBD8000000940001CEE0D7
-:10004000000058E80001CF78000000C400022868D2
-:100050000000F9700002293000000004000322A80B
-:10006000020400480000000F020400540000004594
-:1000700002040058000000840204005C0000000636
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000020400CC40100000D0
-:10010000060400D000000003020400DC0010000020
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000020400EC4214000053
-:10013000060400F000000003010401240000000098
-:1001400001040128000000000104012C000000004F
-:100150000104013000000000020401D00000890603
-:1001600002040004000000FF02040008000000FF79
-:100170000204000C000000FF02040010000000FF59
-:1001800002040014000000FF02040018000000FF39
-:100190000204001C000000FF02040020000000FF19
-:1001A000020400240000003E0204002800000000B9
-:1001B0000204002C0000003F020400300000003F59
-:1001C000020400340000003F020400380000003F39
-:1001D0000204003C0000003F020400400000003F19
-:1001E000020400440000003F020404CC00000001AF
-:1001F00002042008000002110204200C000002008A
-:10020000020420100000020402042014000002195D
-:100210000204201C0000FFFF020420200000FFFF5A
-:10022000020420240000FFFF020420280000FFFF3A
-:1002300002042038000000200204203C00000000DE
-:100240000204204000000034020420440000003575
-:10025000060420480000001C020420B80000000131
-:10026000060420BC0000005F0204223807FFFFFFE5
-:100270000204223C0000003F0204224007FFFFFF6F
-:10028000020422440000000F010422480000000084
-:100290000104224C00000000010422500000000074
-:1002A0000104225400000000010422580000000054
-:1002B0000104225C00000000010422600000000034
-:1002C0000104226400000000010422680000000014
-:1002D0000104226C000000000104227000000000F4
-:1002E00001042274000000000104227800000000D4
-:1002F0000104227C000000000C042000000003E840
-:100300000A042000000000010B0420000000000A85
-:1003100002050044000000200205004800000032F1
-:10032000020500900215002002050094021500202D
-:1003300002050098000000300205009C0810000033
-:10034000020500A000000033020500A400000030F8
-:10035000020500A800000031020500AC0000000208
-:10036000020500B000000005020500B40000000610
-:10037000020500B800000002020500BC00000002F7
-:10038000020500C000000000020500C400000005D6
-:10039000020500C800000002020500CC00000002B7
-:1003A000020500D000000002020500D40000000198
-:1003B00002050114000000010205011C00000001FB
-:1003C00002050120000000020205020400000001F5
-:1003D0000205020C0000004002050210000000406F
-:1003E0000205021C0000002002050220000000138C
-:1003F0000205022400000020060502400000000A59
-:1004000004050280002000000205005000000007E3
-:100410000205005400000007020500580000000813
-:100420000205005C000000080205006000000001F9
-:100430000605006400000003020500D80000000665
-:100440000205000400000001020500080000000190
-:100450000205000C00000001020500100000000170
-:100460000205001400000001020500180000000150
-:100470000205001C00000001020500200000000130
-:100480000205002400000001020500280000000110
-:100490000205002C000000010205003000000001F0
-:1004A00002050034000000010205003800000001D0
-:1004B0000205003C000000010205004000000001B0
-:1004C000020500E00000000D020500E80000000742
-:1004D000020500F000000007020500F80000000718
-:1004E000020500E40000002D020500EC00000027DA
-:1004F000020500F400000027020500FC00000027B0
-:10050000020500E00000001D020500E800000017E1
-:10051000020500F000000017020500F800000017B7
-:10052000020500E40000003D020500EC0000003779
-:10053000020500F400000037020500FC000000374F
-:10054000020500E00000004D020500E80000004741
-:10055000020500F000000047020500F80000004717
-:10056000020500E40000006D020500EC00000067D9
-:10057000020500F400000067020500FC00000067AF
-:10058000020500E00000005D020500E800000057E1
-:10059000020500F000000057020500F800000057B7
-:1005A000020500E40000007D020500EC0000007779
-:1005B000020500F400000077020500FC000000774F
-:1005C0000406100002000020020600DC000000010A
-:1005D000010600D80000000004060200000302200B
-:1005E000020600DC00000000010600B80000000068
-:1005F000010600C800000000010600BC0000000069
-:10060000010600CC000000000718040000A900004B
-:10061000081807C800070223071C00002C2100004F
-:10062000071C800038930B09071D0000292B192E89
-:10063000081D685052F60225011800000000000055
-:10064000011800040000000001180008000000006C
-:100650000118000C0000000001180010000000004C
-:100660000118001400000000021800200000000122
-:1006700002180024000000020218002800000003F5
-:100680000218002C000000000218003000000004D6
-:1006900002180034000000010218003800000000B9
-:1006A0000218003C00000001021800400000000495
-:1006B0000218004400000000021800480000000179
-:1006C0000218004C00000003021800500000000057
-:1006D0000218005400000001021800580000000435
-:1006E0000218005C00000000021800600000000119
-:1006F00002180064000000030218006800000000F7
-:100700000218006C000000010218007000000004D4
-:1007100002180074000000000218007800000004B5
-:100720000218007C00000003061800800000000290
-:10073000021800A400003FFF021800A8000003FFF9
-:100740000218022400000000021802340000000019
-:100750000218024C00000000021802E4000000FF32
-:100760000618100000000400021B8BC000000001EE
-:10077000021B800000000034021B804000000018B3
-:10078000021B80800000000C021B80C000000020C3
-:100790000C1B83000007A1200A1B83000000013806
-:1007A0000B1B830000001388021B83C0000001F4B0
-:1007B000021B1480000000010A1B148000000000CE
-:1007C000061A1000000003B3041A1ECC0001022711
-:1007D000061AA020000000C8061AA00000000002AF
-:1007E000021A1ED000000000061A1ED800000006E3
-:1007F000061A36E800000004061A36E0000000027F
-:10080000061A500000000002061A500800000004FA
-:10081000061A501800000004061A502800000004B0
-:10082000061A503800000004061A50480000000460
-:10083000061A505800000004061A50680000000410
-:10084000061A507800000002041A404000020228F4
-:10085000061A400000000002061A400800000002CC
-:10086000041A62C00020022A061AD1000000000209
-:10087000061A200000000124061AB000000000281B
-:10088000061AB1400000000C061A330000000014E4
-:10089000061A33A000000068061A81080000000252
-:1008A000061AD1C800000002061AD1D800000020A4
-:1008B000061A249000000124061AB0A000000028A7
-:1008C000061AB1700000000C061A33500000001424
-:1008D000061A354000000068061A81100000000268
-:1008E000061AD1D000000002061AD25800000020DB
-:1008F000021A292000000000061A30000000000241
-:10090000041A30080005024A061A301C00000009CB
-:10091000061A320000000008061A5000000000020B
-:10092000061A508000000012061A40000000000263
-:10093000061AD0C000000002021A2924000000009C
-:10094000061A304000000002041A30480005024F29
-:10095000061A305C00000009061A32200000000868
-:10096000061A501000000002061A50C800000012BB
-:10097000061A400800000002061AD0C80000000253
-:10098000021A292800000000061A30800000000228
-:10099000041A308800050254061A309C0000000931
-:1009A000061A324000000008061A5020000000021B
-:1009B000061A511000000012041A401000020259D9
-:1009C000061AD0D000000002021A292C00000000F4
-:1009D000061A30C000000002041A30C80005025B8D
-:1009E000061A30DC00000009061A32600000000818
-:1009F000061A503000000002061A5158000000127A
-:100A0000041A401800020260061AD0D80000000242
-:100A1000021A293000000000061A3100000000020E
-:100A2000041A310800050262061A311C0000000990
-:100A3000061A328000000008061A5040000000022A
-:100A4000061A51A000000012041A4020000202679A
-:100A5000061AD0E000000002021A2934000000004B
-:100A6000061A314000000002041A314800050269EC
-:100A7000061A315C00000009061A32A000000008C6
-:100A8000061A505000000002061A51E80000001239
-:100A9000041A40280002026E061AD0E80000000284
-:100AA000021A293800000000061A318000000002F6
-:100AB000041A318800050270061A319C00000009F2
-:100AC000061A32C000000008061A5060000000023A
-:100AD000061A523000000012041A4030000202755B
-:100AE000061AD0F000000002021A293C00000000A3
-:100AF000061A31C000000002041A31C8000502774E
-:100B0000061A31DC00000009061A32E00000000875
-:100B1000061A507000000002061A527800000012F7
-:100B2000041A40380002027C061AD0F800000002C5
-:100B30000200A294071D29110200A29800000000E3
-:100B40000200A29C009C04240200A2A0000000005D
-:100B50000200A2A4000002090200A270000000002E
-:100B60000200A274000000000200A2700000000059
-:100B70000200A274000000000200A2700000000049
-:100B80000200A274000000000200A2700000000039
-:100B90000200A27400000000020100B40000000185
-:100BA000020100B800000001020100DC00000001A9
-:100BB0000201010000000001020101040000000127
-:100BC0000201007C003000000201008400000028C7
-:100BD0000201008C0000000002010130000000044E
-:100BE0000201025C00000001020103280000000075
-:100BF0000201607000000007020160800000000137
-:100C00000201055400000030020100C40000000190
-:100C1000020100CC00000001020100F80000000108
-:100C2000020100F00000000102010080003000001D
-:100C3000020100880000002802010090000000006E
-:100C40000201013400000004020102DC0000000186
-:100C50000201032C00000000020160740000000784
-:100C60000201608400000001020105640000003000
-:100C7000020100C800000001020100D000000001D4
-:100C8000020100FC00000001020100F4000000016C
-:100C9000020C100000000020020C200800000211CD
-:100CA000020C200C00000200020C201000000204C4
-:100CB000020C201C0000FFFF020C20200000FFFFA0
-:100CC000020C20240000FFFF020C20280000FFFF80
-:100CD000060C203800000002020C20400000003406
-:100CE000020C204400000035020C204800000020C7
-:100CF000020C204C00000021020C205000000022B9
-:100D0000020C205400000023020C20580000002494
-:100D1000020C205C00000025020C20600000002670
-:100D2000020C206400000027020C2068000000284C
-:100D3000020C206C00000029020C20700000002A28
-:100D4000020C20740000002B060C207800000056D6
-:100D5000020C21D000000001020C21D4000000018F
-:100D6000020C21D800000001020C21DC000000016F
-:100D7000020C21E000000001020C21E4000000014F
-:100D8000020C21E800000001020C21EC000000012F
-:100D9000020C21F000000001020C21F4000000010F
-:100DA000060C21F800000010020C223807FFFFFF9C
-:100DB000020C223C0000003F020C224007FFFFFF14
-:100DC000020C22440000000F010C22480000000029
-:100DD000010C224C00000000010C22500000000019
-:100DE000010C225400000000010C225800000000F9
-:100DF000010C225C00000000010C226000000000D9
-:100E0000010C226400000000010C226800000000B8
-:100E1000010C226C00000000010C22700000000098
-:100E2000010C227400000000010C22780000000078
-:100E3000010C227C000000000C0C2000000003E8E4
-:100E40000A0C2000000000010B0C20000000000A2A
-:100E5000020C400800000411020C400C00000400C9
-:100E6000020C401000000404020C40140000042195
-:100E7000020C401C0000FFFF020C40200000FFFF9E
-:100E8000020C40240000FFFF020C40280000FFFF7E
-:100E9000020C403800000046020C403C00000005F7
-:100EA000060C404000000002020C40480000000A0E
-:100EB000020C404C000000F0060C40500000001FE7
-:100EC000020C40CC00000001060C40D00000003AAB
-:100ED000020C41B800000001060C41BC00000003F8
-:100EE000020C41C800000001020C41CC00000001CE
-:100EF000060C41D00000001A020C423807FFFFFF29
-:100F0000020C423C0000003F020C424007FFFFFF82
-:100F1000020C42440000000F010C42480000000097
-:100F2000010C424C00000000010C42500000000087
-:100F3000010C425400000000010C42580000000067
-:100F4000010C425C00000000010C42600000000047
-:100F5000010C426400000000010C42680000000027
-:100F6000010C426C00000000010C42700000000007
-:100F7000010C427400000000010C427800000000E7
-:100F8000010C427C00000000010C428000000000C7
-:100F90000C0C4000000003E80A0C400000000001B7
-:100FA0000B0C40000000000A020D0044000000325B
-:100FB000020D008C02150020020D00900215002089
-:100FC000020D009408100000020D0098000000338C
-:100FD000020D009C00000002020D00A000000000B5
-:100FE000020D00A400000005020D00A8000000058D
-:100FF000060D00AC00000002020D00B4000000026B
-:10100000020D00B800000003020D00BC0000000249
-:10101000020D00C000000001020D00C80000000227
-:10102000020D00CC00000002020D010800000001CA
-:10103000020D015C00000001020D016400000001CE
-:10104000020D016800000002020D02040000000110
-:10105000020D020C00000020020D021000000040F2
-:10106000020D021400000040020D022000000003E7
-:10107000020D022400000018060D0280000000127C
-:10108000040D03000024027E020D004C000000014C
-:10109000020D005000000002020D00540000000884
-:1010A000020D005800000008060D005C000000045E
-:1010B000020D00C400000004020D00040000000145
-:1010C000020D000800000001020D000C00000001EC
-:1010D000020D001000000001020D001400000001CC
-:1010E000020D001800000001020D001C00000001AC
-:1010F000020D002000000001020D0024000000018C
-:10110000020D002800000001020D002C000000016B
-:10111000020D003000000001020D0034000000014B
-:10112000020D003800000001020D003C000000012B
-:10113000020D011400000009020D011C0000000A4C
-:10114000020D012400000007020D012C0000000721
-:10115000020D01340000000C020D013C0000000BE8
-:10116000020D014400000007020D011800000029D3
-:10117000020D01200000002A020D012800000027B6
-:10118000020D013000000027020D01380000002C84
-:10119000020D01400000002B020D01480000002755
-:1011A000020D011400000019020D011C0000001ABC
-:1011B000020D012400000017020D012C0000001791
-:1011C000020D01340000001C020D013C0000001B58
-:1011D000020D014400000017020D01180000003943
-:1011E000020D01200000003A020D01280000003726
-:1011F000020D013000000037020D01380000003CF4
-:10120000020D01400000003B020D014800000037C4
-:10121000020D011400000049020D011C0000004AEB
-:10122000020D012400000047020D012C00000047C0
-:10123000020D01340000004C020D013C0000004B87
-:10124000020D014400000047020D01180000006972
-:10125000020D01200000006A020D01280000006755
-:10126000020D013000000067020D01380000006C23
-:10127000020D01400000006B020D014800000067F4
-:10128000020D011400000059020D011C0000005A5B
-:10129000020D012400000057020D012C0000005730
-:1012A000020D01340000005C020D013C0000005BF7
-:1012B000020D014400000057020D011800000079E2
-:1012C000020D01200000007A020D012800000077C5
-:1012D000020D013000000077020D01380000007C93
-:1012E000020D01400000007B020D01480000007764
-:1012F000020E004C00000032020E00940215002085
-:10130000020E009802150020020E009C0000003022
-:10131000020E00A008100000020E00A4000000331E
-:10132000020E00A800000030020E00AC00000031E8
-:10133000020E00B000000002020E00B40000000423
-:10134000020E00B800000000020E00BC0000000207
-:10135000020E00C000000002020E00C400000000E7
-:10136000020E00C800000002020E00CC00000007C0
-:10137000020E00D000000002020E00D400000002A5
-:10138000020E00D800000001020E00E4000000017F
-:10139000020E014400000001020E014C0000000199
-:1013A000020E015000000002020E020400000001C3
-:1013B000020E020C00000040020E0210000000406D
-:1013C000020E021C00000004020E02200000002099
-:1013D000020E02240000000E020E02280000001B74
-:1013E000060E030000000012040E0280001B02A281
-:1013F000020E00540000000C020E0058000000090C
-:10140000020E005C0000000F020E006000000010E1
-:10141000020E00640000000B060E006800000003CE
-:10142000020E00DC00000003020E000400000001B8
-:10143000020E000800000001020E000C0000000176
-:10144000020E001000000001020E00140000000156
-:10145000020E001800000001020E001C0000000136
-:10146000020E002000000001020E00240000000116
-:10147000020E002800000001020E002C00000001F6
-:10148000020E003000000001020E003400000001D6
-:10149000020E003800000001020E003C00000001B6
-:1014A000020E004000000001020E00440000000196
-:1014B000020E01100000000F020E01180000000EC5
-:1014C000020E012000000000020E012800000000B2
-:1014D000020E01140000002F020E011C0000002E5D
-:1014E000020E012400000000020E012C000000008A
-:1014F000020E01100000001F020E01180000001E65
-:10150000020E012000000000020E01280000000071
-:10151000020E01140000003F020E011C0000003EFC
-:10152000020E012400000000020E012C0000000049
-:10153000020E01100000004F020E01180000004EC4
-:10154000020E012000000000020E01280000000031
-:10155000020E01140000006F020E011C0000006E5C
-:10156000020E012400000000020E012C0000000009
-:10157000020E01100000005F020E01180000005E64
-:10158000020E012000000000020E012800000000F1
-:10159000020E01140000007F020E011C0000007EFC
-:1015A000020E012400000000020E012C00000000C9
-:1015B0000730040000E80000083007D8000502BD2D
-:1015C000073400002EAA000007348000312D0BAB39
-:1015D00007350000358217F707358000396D25582B
-:1015E00007360000142D33B40836321039BE02BF5E
-:1015F0000130000000000000013000040000000085
-:1016000001300008000000000130000C0000000064
-:101610000130001000000000013000140000000044
-:10162000023000200000000102300024000000020F
-:1016300002300028000000030230002C00000000EF
-:1016400002300030000000040230003400000001CD
-:1016500002300038000000000230003C00000001B1
-:10166000023000400000000402300044000000008E
-:1016700002300048000000010230004C000000036E
-:101680000230005000000000023000540000000151
-:1016900002300058000000040230005C000000002E
-:1016A000023000600000000102300064000000030E
-:1016B00002300068000000000230006C00000001F1
-:1016C00002300070000000040230007400000000CE
-:1016D00002300078000000040230007C00000003AB
-:1016E0000630008000000002023000A400003FFF2E
-:1016F000023000A8000003FF0230022400000000B6
-:1017000002300234000000000230024C00000000F1
-:10171000023002E40000FFFF063020000000080055
-:1017200002338BC000000001023380000000001A69
-:10173000023380400000004E023380800000001021
-:10174000023380C0000000200C3383000007A1207A
-:101750000A338300000001380B3383000000138834
-:10176000023383C0000001F40C3383801DCD65007B
-:101770000A3383800004C4B40B338380004C4B4095
-:101780000A331480000000000233148000000001BE
-:10179000063220000000010206328020000000C84E
-:1017A000063280000000000206323DA8000000045E
-:1017B00006323D800000000904323DA4000102C150
-:1017C00006323D00000000200632500000000400F8
-:1017D0000632400000000004063240D00000000243
-:1017E00006326B680000000204326B70000202C215
-:1017F00006326B1000000002043274C0000202C402
-:101800000632DA40000000020632E0000000080064
-:10181000023308000100000004330C00001002C66F
-:10182000023308000000000004330C40001002D610
-:1018300006322450000000B406322AD00000000214
-:1018400006321000000001A002323DB80000000086
-:101850000632500000000020063251000000002037
-:101860000632520000000020063253000000002023
-:10187000063254000000002006325500000000200F
-:1018800006325600000000200632570000000020FB
-:1018900006325800000000200632590000000020E7
-:1018A00006325A000000002006325B0000000020D3
-:1018B00006325C000000002006325D0000000020BF
-:1018C00006325E000000002006325F0000000020AB
-:1018D00006326B780000005206326E080000000CE1
-:1018E0000632DA880000000206322720000000B429
-:1018F00006322AD80000000206321680000001A03D
-:1019000002323DBC00000000063250800000002082
-:101910000632518000000020063252800000002074
-:101920000632538000000020063254800000002060
-:10193000063255800000002006325680000000204C
-:101940000632578000000020063258800000002038
-:10195000063259800000002006325A800000002024
-:1019600006325B800000002006325C800000002010
-:1019700006325D800000002006325E8000000020FC
-:1019800006325F800000002006326CC0000000526A
-:1019900006326E380000000C0632DA9000000002B9
-:1019A00002322A300000000006324010000000021F
-:1019B0000632D0000000000602322A340000000087
-:1019C00006324020000000020632D0180000000657
-:1019D00002322A38000000000632403000000002C7
-:1019E0000632D0300000000602322A3C000000001F
-:1019F00006324040000000020632D04800000006D7
-:101A000002322A400000000006324050000000026E
-:101A10000632D0600000000602322A4400000000B6
-:101A200006324060000000020632D0780000000656
-:101A300002322A4800000000063240700000000216
-:101A40000632D0900000000602322A4C000000004E
-:101A500006324080000000020632D0A800000006D6
-:101A6000072004000093000008200780001002E611
-:101A7000072400002ADE0000072480002E050AB893
-:101A80000824E4A061D202E8012000000000000068
-:101A900001200004000000000120000800000000F8
-:101AA0000120000C000000000120001000000000D8
-:101AB00001200014000000000220002000000001AE
-:101AC0000220002400000002022000280000000381
-:101AD0000220002C00000000022000300000000462
-:101AE0000220003400000001022000380000000045
-:101AF0000220003C00000001022000400000000421
-:101B00000220004400000000022000480000000104
-:101B10000220004C000000030220005000000000E2
-:101B200002200054000000010220005800000004C0
-:101B30000220005C000000000220006000000001A4
-:101B40000220006400000003022000680000000082
-:101B50000220006C00000001022000700000000460
-:101B60000220007400000000022000780000000441
-:101B70000220007C0000000306200080000000021C
-:101B8000022000A400003FFF022000A8000003FF85
-:101B900002200224000000000220023400000000A5
-:101BA0000220024C00000000022002E40000FFFFBF
-:101BB000062020000000080002238BC00000000166
-:101BC0000223800000000010022380400000001269
-:101BD0000223808000000030022380C00000000E3D
-:101BE000022383C0000001F40223148000000001DE
-:101BF0000A231480000000000622100000000042AA
-:101C000006227020000000C80622700000000002BA
-:101C1000022211E80000000006223000000000C08F
-:101C2000062240700000008006225280000000045E
-:101C30000622670000000100062290000000040058
-:101C400004226B08002002EA02230800013FFFFF84
-:101C500004230C000010030A022308000000000007
-:101C600004230C400010031A06228100000000A08B
-:101C7000062286000000004006228C000000003C86
-:101C80000622B0000000020006228800000000804A
-:101C900006228DE00000003C0622404000000006C5
-:101CA00006228380000000A006228700000000407A
-:101CB00006228CF00000003C0622B8000000020062
-:101CC00006228A000000008006228ED00000003C20
-:101CD000062240580000000606228000000000088E
-:101CE000022211480000000006223300000000021A
-:101CF000062260400000003006228020000000081C
-:101D00000222114C000000000622330800000002ED
-:101D1000062261000000003006228040000000081A
-:101D200002221150000000000622331000000002C1
-:101D3000062261C00000003006228060000000081A
-:101D40000222115400000000062233180000000295
-:101D50000622628000000030062280800000000819
-:101D60000222115800000000062233200000000269
-:101D70000622634000000030062280A00000000818
-:101D80000222115C0000000006223328000000023D
-:101D90000622640000000030062280C00000000817
-:101DA0000222116000000000062233300000000211
-:101DB000062264C000000030062280E00000000817
-:101DC00002221164000000000622333800000002E5
-:101DD0000622658000000030021610000000002876
-:101DE00002170008000000020217002C0000000388
-:101DF0000217003C00000004021700440000000825
-:101E000002170048000000020217004C000000907A
-:101E1000021700500000009002170054008000904C
-:101E20000217005808140000021700600000008A22
-:101E300002170064000000800217006800000081A3
-:101E40000217006C000000800217007000000006FE
-:101E500002170078000007D00217007C0000076C12
-:101E600002170038007C1004021700040000000F65
-:101E70000616402400000002021640700000001CFC
-:101E80000216420800000001021642100000000184
-:101E90000216422000000001021642280000000144
-:101EA0000216423000000001021642380000000114
-:101EB00002164260000000020C16401C0003D09085
-:101EC0000A16401C0000009C0B16401C000009C4B0
-:101ED0000216403000000008021640340000000CDA
-:101EE0000216403800000010021640440000002096
-:101EF0000216400000000001021640D80000000158
-:101F000002164008000000010216400C000000010B
-:101F100002164010000000010216424000000000BE
-:101F2000021642480000000006164270000000023F
-:101F30000216425000000000021642580000000045
-:101F40000616428000000002021660080000042409
-:101F50000216600C00000410021660100000041449
-:101F60000216601C0000FFFF021660200000FFFF49
-:101F7000021660240000FFFF021660280000FFFF29
-:101F800002166038000000200216603C00000020AD
-:101F90000216604000000034021660440000003564
-:101FA00002166048000000230216604C0000002466
-:101FB0000216605000000025021660540000002642
-:101FC00002166058000000270216605C000000291D
-:101FD000021660600000002A021660640000002BF8
-:101FE000021660680000002C0216606C0000002DD4
-:101FF0000616607000000052021661B80000000171
-:10200000061661BC0000001F0216623807FFFFFFC2
-:102010000216623C0000003F0216624007FFFFFF0D
-:10202000021662440000000F011662480000000022
-:102030000116624C00000000011662500000000012
-:1020400001166254000000000116625800000000F2
-:102050000116625C000000000116626000000000D2
-:1020600001166264000000000116626800000000B2
-:102070000116626C00000000011662700000000092
-:102080000116627400000000011662780000000072
-:102090000116627C000000000C166000000003E8DE
-:1020A0000A166000000000010B1660000000000A24
-:1020B0000216804000000006021680440000000561
-:1020C000021680480000000A0216804C000000053D
-:1020D0000216805400000002021680CC00000004AA
-:1020E000021680D000000004021680D40000000414
-:1020F000021680D800000004021680DC00000004F4
-:10210000021680E000000004021680E400000004D3
-:10211000021680E800000004021688040000000493
-:10212000021680300000007C021680340000003D62
-:10213000021680380000003F0216803C0000009C20
-:10214000021680F000000007061680F4000000056B
-:102150000216880C0101010102168108000000002E
-:102160000216810C00000004021681100000000419
-:1021700002168114000000020216881008012004D3
-:1021800002168118000000050216811C00000005DF
-:1021900002168120000000050216812400000005BF
-:1021A0000216882C20081001021681280000000861
-:1021B0000216812C00000006021681300000000784
-:1021C000021681340000000002168830010101204F
-:1021D000061681380000000402168834010101014E
-:1021E00002168148000000000216814C0000000425
-:1021F0000216815000000004021681540000000203
-:1022000002168838080120040216815800000005D3
-:102210000216815C000000050216816000000005C6
-:1022200002168164000000050216883C2008100197
-:1022300002168168000000080216816C000000068A
-:102240000216817000000007021681740000000170
-:102250000216884001010120021681780000000169
-:102260000216817C0000000102168180000000013E
-:102270000216818400000001021688440101010158
-:1022800002168188000000010216818C0000000403
-:1022900002168190000000040216819400000002E2
-:1022A00002168848080120040216819800000005E3
-:1022B0000216819C00000005021681A000000005A6
-:1022C000021681A4000000050216881420081001DF
-:1022D000021681A800000008021681AC000000066A
-:1022E000021681B000000007021681B40000000150
-:1022F0000216881801010120021681B800000001B1
-:10230000021681BC00000001021681C0000000011D
-:10231000021681C4000000010216881C010101019F
-:10232000021681C800000001021681CC00000004E2
-:10233000021681D000000004021681D400000002C1
-:102340000216882008012004021681D8000000052A
-:10235000021681DC00000005021681E00000000585
-:10236000021681E4000000050216882420081001EE
-:10237000021681E800000008021681EC0000000649
-:10238000021681F0000000070216E40C00000000B5
-:1023900002168828010101200616E410000000043E
-:1023A0000216E000010101010216E4200000000015
-:1023B0000216E424000000040216E42800000004D1
-:1023C0000216E42C000000020216E00408012004BA
-:1023D0000216E430000000050216E4340000000597
-:1023E0000216E438000000050216E43C0000000577
-:1023F0000216E008200810010216E4400000000860
-:102400000216E444000000060216E448000000073B
-:102410000216E44C000000000216E00C010101204D
-:102420000616E450000000040216E010010101014C
-:102430000216E460000000000216E46400000004DC
-:102440000216E468000000040216E46C00000002BA
-:102450000216E014080120040216E47000000005D2
-:102460000216E474000000050216E478000000057E
-:102470000216E47C000000050216E0182008100196
-:102480000216E480000000080216E4840000000642
-:102490000216E488000000070216E48C0000000128
-:1024A0000216E01C010101200216E4900000000168
-:1024B0000216E494000000010216E49800000001F6
-:1024C0000216E49C000000010216E0200101010157
-:1024D0000216E4A0000000010216E4A400000004BB
-:1024E0000216E4A8000000040216E4AC000000029A
-:1024F0000216E024080120040216E4B000000005E2
-:102500000216E4B4000000050216E4B8000000055D
-:102510000216E4BC000000050216E02820081001A5
-:102520000216E4C0000000080216E4C40000000621
-:102530000216E4C8000000070216E4CC0000000107
-:102540000216E02C010101200216E4D00000000177
-:102550000216E4D4000000010216E4D800000001D5
-:102560000216E4DC000000010216E0300101010166
-:102570000216E4E0000000010216E4E4000000049A
-:102580000216E4E8000000040216E4EC0000000279
-:102590000216E034080120040216E4F000000005F1
-:1025A0000216E4F4000000050216E4F8000000053D
-:1025B0000216E4FC000000050216E03820081001B5
-:1025C0000216E500000000080216E50400000006FF
-:1025D0000216E508000000070216E03C0101012098
-:1025E00002168240003F003F0216824400000000B5
-:1025F0000216E524003F003F0216E5280000000017
-:1026000002168248000000000216824C003F003F84
-:102610000216E52C000000000216E530003F003FE6
-:1026200002168250010001000216825401000100CE
-:102630000216E534010001000216E5380100010030
-:1026400006168258000000020216E53C0000000059
-:102650000216E540000000000216826000C000C0C3
-:102660000216826400C000C00216E54400C000C02B
-:102670000216E54800C000C0021682681E001E0057
-:102680000216826C1E001E000216E54C1E001E0083
-:102690000216E5501E001E00021682704000400027
-:1026A00002168274400040000216E55440004000CB
-:1026B0000216E55840004000021682788000800033
-:1026C0000216827C800080000216E55C800080009B
-:1026D0000216E56080008000021682802000200043
-:1026E00002168284200020000216E56420002000EB
-:1026F0000216E5682000200006168288000000020D
-:102700000216E56C000000000216E57000000000F3
-:102710000216829000000000021682940000000061
-:102720000216E574000000000216E57800000000C3
-:1027300002168298000000000216829C0000000031
-:102740000216E57C000000000216E5800000000093
-:10275000021682A000000000021682A40000000100
-:10276000061682A80000000A021681F400000C0878
-:10277000021681F800000040021681FC00000100F2
-:1027800002168200000000200216820400000017DA
-:1027900002168208000000800216820C000002006F
-:1027A00002168210000000000216821801FF01FFCD
-:1027B0000216821401FF01FF0216E51001FF01FF5E
-:1027C0000216E50C01FF01FF0216823C0000001317
-:1027D000021680900000013F021680600000014058
-:1027E00002168064000001400616806800000002A6
-:1027F00002168070000000C00616807400000007FA
-:102800000216809C00000048021680A000000048CC
-:10281000061680A400000002021680AC00000048EA
-:10282000061680B000000007021682380000800003
-:1028300002168234000025E40216809400007FFF17
-:1028400002168220000F000F0216821C000F000FDC
-:102850000216E518000F000F0216E514000F000F16
-:10286000021682280000000002168224FFFFFFFFEC
-:102870000216E520000000000216E51CFFFFFFFF26
-:102880000216E6BC000000000216E6C000000002CE
-:102890000216E6C4000000010216E6C800000003AC
-:1028A0000216E6CC000000040216E6D00000000686
-:1028B0000216E6D4000000050216E6D80000000764
-:1028C000021680EC000000FF02140000000000016E
-:1028D0000214000C0000000102140040000000017E
-:1028E0000214004400007FFF0214000C00000000EE
-:1028F00002140000000000000214006C0000000040
-:102900000214000400000001021400300000000165
-:1029100002140004000000000214005C000000002B
-:10292000021400080000000102140034000000013D
-:102930000214000800000000021400600000000003
-:102940000202005800000032020200A0031500201D
-:10295000020200A403150020020200A801000030BA
-:10296000020200AC08100000020200B000000033B8
-:10297000020200B400000030020200B80000003182
-:10298000020200BC00000003020200C000000006BA
-:10299000020200C400000003020200C8000000039D
-:1029A000020200CC00000002020200D00000000081
-:1029B000020200D400000002020200DC000000005D
-:1029C000020200E000000006020200E40000000431
-:1029D000020200E800000002020200EC0000000217
-:1029E000020200F000000001020200FC00000006EC
-:1029F0000202012000000000020201340000000277
-:102A0000020201B0000000010202020C00000001FD
-:102A1000020202140000000102020218000000027B
-:102A200002020404000000010202040C0000004045
-:102A300002020410000000400202041C0000000416
-:102A40000202042000000020020204240000000210
-:102A50000202042800000020060205000000001207
-:102A600004020480001F032A020200600000000F1D
-:102A70000202006400000007020200680000000B70
-:102A80000202006C0000000E020200700000000E46
-:102A90000602007400000003020200F400000004BB
-:102AA0000202000400000001020200080000000110
-:102AB0000202000C000000010202001000000001F0
-:102AC00002020014000000010202001800000001D0
-:102AD0000202001C000000010202002000000001B0
-:102AE0000202002400000001020200280000000190
-:102AF0000202002C00000001020200300000000170
-:102B0000020200340000000102020038000000014F
-:102B10000202003C0000000102020040000000012F
-:102B2000020200440000000102020048000000010F
-:102B30000202004C000000010202005000000001EF
-:102B400002020108000000C8020201180000000291
-:102B5000020201C400000000020201CC00000000DB
-:102B6000020201D400000002020201DC00000002A7
-:102B7000020201E4000000FF020201EC000000FF7D
-:102B800002020100000000000202010C000000C867
-:102B90000202011C00000002020201C80000000045
-:102BA000020201D000000000020201D80000000271
-:102BB000020201E000000002020201E8000000FF42
-:102BC000020201F0000000FF020201040000000008
-:102BD00002020108000000C8020201180000000201
-:102BE000020201C400000000020201CC000000004B
-:102BF000020201D400000002020201DC0000000217
-:102C0000020201E4000000FF020201EC000000FFEC
-:102C100002020100000000000202010C000000C8D6
-:102C20000202011C00000002020201C800000000B4
-:102C3000020201D000000000020201D800000002E0
-:102C4000020201E000000002020201E8000000FFB1
-:102C5000020201F0000000FF020201040000000077
-:102C600002020108000000C8020201180000000270
-:102C7000020201C400000000020201CC00000000BA
-:102C8000020201D400000002020201DC0000000286
-:102C9000020201E4000000FF020201EC000000FF5C
-:102CA00002020100000000000202010C000000C846
-:102CB0000202011C00000002020201C80000000024
-:102CC000020201D000000000020201D80000000250
-:102CD000020201E000000002020201E8000000FF21
-:102CE000020201F0000000FF0202010400000000E7
-:102CF00002020108000000C80202011800000002E0
-:102D0000020201C400000000020201CC0000000029
-:102D1000020201D400000002020201DC00000002F5
-:102D2000020201E4000000FF020201EC000000FFCB
-:102D300002020100000000000202010C000000C8B5
-:102D40000202011C00000002020201C80000000093
-:102D5000020201D000000000020201D800000002BF
-:102D6000020201E000000002020201E8000000FF90
-:102D7000020201F0000000FF020201040000000056
-:102D80000728040000C00000082807A8000B03491A
-:102D9000072C000032FC0000072C800035790CC0A5
-:102DA000072D00003AC11A1F072D800039EF28D0E7
-:102DB000072E00001C3E374C082E3710391E034BDF
-:102DC00001280000000000000128000400000000AD
-:102DD00001280008000000000128000C000000008D
-:102DE000012800100000000001280014000000006D
-:102DF0000228002000000001022800240000000238
-:102E000002280028000000030228002C0000000017
-:102E100002280030000000040228003400000001F5
-:102E200002280038000000000228003C00000001D9
-:102E300002280040000000040228004400000000B6
-:102E400002280048000000010228004C0000000396
-:102E50000228005000000000022800540000000179
-:102E600002280058000000040228005C0000000056
-:102E70000228006000000001022800640000000336
-:102E800002280068000000000228006C0000000119
-:102E900002280070000000040228007400000000F6
-:102EA00002280078000000040228007C00000003D3
-:102EB0000628008000000002022800A400003FFF56
-:102EC000022800A8000003FF0228022400000000DE
-:102ED00002280234000000000228024C000000001A
-:102EE000022802E40000FFFF06282000000008007E
-:102EF000022B8BC000000001022B800000000000AC
-:102F0000022B804000000018022B80800000000C83
-:102F1000022B80C0000000660C2B83000007A1205C
-:102F20000A2B8300000001380B2B8300000013885C
-:102F3000022B83C0000001F40C2B8340000001F43D
-:102F40000A2B8340000000000B2B8340000000058B
-:102F50000A2B83800004C4B40C2B83801DCD650034
-:102F60000A2B1480000000000B2B8380004C4B4088
-:102F7000022B148000000001062A29C8000000046A
-:102F8000042A29D80002034D062A208000000048A8
-:102F9000062A9020000000C8062A900000000002C7
-:102FA000062A21A800000086062A20000000002032
-:102FB000022A23C800000000042A23D00002034F85
-:102FC000042A249800040351022A2C500000000017
-:102FD000022A2C1000000000042A2C0800020355CD
-:102FE000042A300000020357062A300800000100BE
-:102FF000062A404000000010042A40000010035937
-:10300000062A6AC000000002062A6B0000000004C5
-:10301000042A840800020369022B08000000000053
-:10302000042B0C000010036B022B080001000000B1
-:10303000042B0C400008037B022B08000200000058
-:10304000042B0C6000080383062AC000000000D88F
-:10305000062A24A800000014062A254800000022A1
-:10306000042A25D00002038B062A266800000022CD
-:10307000042A26F00002038D062A27880000002279
-:10308000042A28100002038F062A28A80000002224
-:10309000042A293000020391062AA000000000281B
-:1030A000062AA1400000000C042A29E00002039334
-:1030B000062A502000000002062A503000000002BC
-:1030C000062A500000000002062A501000000002EC
-:1030D000022A520800000001042A6AC8000203956F
-:1030E000062A6B1000000042062A6D200000000432
-:1030F000062ABCD000000002062AC360000000D8E7
-:10310000062A24F800000014062A25D80000002210
-:10311000042A266000020397062A26F800000022EF
-:10312000042A278000020399062A2818000000229A
-:10313000042A28A00002039B062A29380000002246
-:10314000042A29C00002039D062AA0A0000000282E
-:10315000062AA1700000000C042A29E80002039F3F
-:10316000062A502800000002062A503800000002FB
-:10317000062A500800000002062A5018000000022B
-:10318000022A520C00000001042A6AD0000203A1A6
-:10319000062A6C1800000042062A6D300000000468
-:1031A000062ABCD800000002022AC6C000000000A7
-:1031B000042A29F0001003A3062A50480000000E3C
-:1031C000062AB00000000006022AC6C40000000063
-:1031D000042A2A30001003B3062A50800000000E93
-:1031E000062AB01800000006022AC6C80000000027
-:1031F000042A2A70001003C3062A50B80000000EEB
-:10320000062AB03000000006022AC6CC00000000EA
-:10321000042A2AB0001003D3062A50F00000000E42
-:10322000062AB04800000006022AC6D000000000AE
-:10323000042A2AF0001003E3062A51280000000E99
-:10324000062AB06000000006022AC6D40000000072
-:10325000042A2B30001003F3062A51600000000EF0
-:10326000062AB07800000006022AC6D80000000036
-:10327000042A2B7000100403062A51980000000E47
-:10328000062AB09000000006022AC6DC00000000FA
-:10329000042A2BB000100413062A51D00000000E9F
-:1032A000062AB0A800000006021010080000000165
-:1032B0000210105000000001021010000003D000A6
-:1032C000021010040000003D091018000200042341
-:1032D0000910110000280623061011A00000001894
-:1032E00006102400000000E00210201C0000000076
-:1032F0000210202000000001021020C00000000287
-:10330000021020040000000102102008000000014B
-:1033100009103C000005064B091038000005065056
-:10332000091038200005065506104C000000010069
-:1033300002104028000000100210404400003FFF2F
-:103340000210405800280000021040840084924A75
-:1033500002104058000000000210800000001080A1
-:10336000021080AC00000000021080380000001045
-:103370000210810000000000061081200000000201
-:1033800002108008000002B502108010000000004A
-:10339000061082000000004A021081080001FFFFB1
-:1033A00006108140000000020210800000001A8018
-:1033B0000610900000000024061091200000004A32
-:1033C000061093700000004A061095C00000004AE5
-:1033D0000210800400001080021080B00000000184
-:1033E0000210803C00000010021081040000000068
-:1033F00006108128000000020210800C000002B5B7
-:103400000210801400000000061084000000004A32
-:103410000210810C0001FFFF06108148000000022D
-:103420000210800400001A80061090900000002412
-:10343000061092480000004A061094980000004AC6
-:10344000061096E80000004A02108000000010807C
-:10345000021080AC00000002021080380000001052
-:103460000210810000000000061081200000000210
-:1034700002108008000002B5021080100000000059
-:10348000061082000000004A021081080001FFFFC0
-:1034900006108140000000020210800000001A8027
-:1034A0000610900000000024061091200000004A41
-:1034B000061093700000004A061095C00000004AF4
-:1034C0000210800400001080021080B00000000391
-:1034D0000210803C00000010021081040000000077
-:1034E00006108128000000020210800C000002B5C6
-:1034F0000210801400000000061084000000004A42
-:103500000210810C0001FFFF06108148000000023C
-:103510000210800400001A80061090900000002421
-:10352000061092480000004A061094980000004AD5
-:10353000061096E80000004A02108000000010808B
-:10354000021080AC0000000402108038000000105F
-:10355000021081000000000006108120000000021F
-:1035600002108008000002B5021080100000000068
-:10357000061082000000004A021081080001FFFFCF
-:1035800006108140000000020210800000001A8036
-:103590000610900000000024061091200000004A50
-:1035A000061093700000004A061095C00000004A03
-:1035B0000210800400001080021080B0000000059E
-:1035C0000210803C00000010021081040000000086
-:1035D00006108128000000020210800C000002B5D5
-:1035E0000210801400000000061084000000004A51
-:1035F0000210810C0001FFFF06108148000000024C
-:103600000210800400001A80061090900000002430
-:10361000061092480000004A061094980000004AE4
-:10362000061096E80000004A02108000000010809A
-:10363000021080AC0000000602108038000000106C
-:10364000021081000000000006108120000000022E
-:1036500002108008000002B5021080100000000077
-:10366000061082000000004A021081080001FFFFDE
-:1036700006108140000000020210800000001A8045
-:103680000610900000000024061091200000004A5F
-:10369000061093700000004A061095C00000004A12
-:1036A0000210800400001080021080B000000007AB
-:1036B0000210803C00000010021081040000000095
-:1036C00006108128000000020210800C000002B5E4
-:1036D0000210801400000000061084000000004A60
-:1036E0000210810C0001FFFF06108148000000025B
-:1036F0000210800400001A80061090900000002440
-:10370000061092480000004A061094980000004AF3
-:10371000061096E80000004A021205B00000000101
-:103720000212049000E383400212051400003C10D2
-:103730000212066C00000001021206700000000078
-:1037400002120494FFFFFFFF02120498FFFFFFFF25
-:103750000212049CFFFFFFFF021204A0FFFFFFFF05
-:10376000021204A4FFFFFFFF021204A8FFFFFFFFE5
-:10377000021204ACFFFFFFFF021204B0FFFFFFFFC5
-:10378000021204BCFFFFFFFF021204C0FFFFFFFF95
-:10379000021204C4FFFFFFFF021204C8FFFFFFFF75
-:1037A000021204CCFFFFFFFF021204D0FFFFFFFF55
-:1037B000021204D8FFFFFFFF021204DCFFFFFFFF2D
-:1037C000021204E0FFFFFFFF021204E4FFFFFFFF0D
-:1037D000021204E8FFFFFFFF021204ECFFFFFFFFED
-:1037E000021204F0FFFFFFFF021204F4FFFFFFFFCD
-:1037F000021204F8FFFFFFFF021204FCFFFFFFFFAD
-:1038000002120500FFFFFFFF02120504FFFFFFFF8A
-:1038100002120508FFFFFFFF0212050CFFFFFFFF6A
-:1038200002120510FFFFFFFF021204D4FF802000E8
-:10383000021204B4F0005000021204B8F0001000AC
-:1038400002120390000000080212039C000000080E
-:10385000021203A000000008021203A400000002EC
-:10386000021203BC00000004021203C000000005A5
-:10387000021203C400000004021203D00000000082
-:103880000212036C00000001021203680000003FF6
-:10389000021201BC00000040021201C00000180822
-:1038A000021201C400000803021201C8000008034C
-:1038B000021201CC00000040021201D000000003FF
-:1038C000021201D400000803021201D8000008030C
-:1038D000021201DC00000803021201E000010003F3
-:1038E000021201E400000803021201E800000803CC
-:1038F000021201EC00000003021201F000000003BC
-:10390000021201F400000003021201F8000000039B
-:10391000021201FC0000000302120200000000037A
-:103920000212020400000003021202080000000359
-:103930000212020C00000003021202100000000339
-:103940000212021400000003021202180000000319
-:103950000212021C000000030212022000000003F9
-:1039600002120224000000030212022800002403B5
-:103970000212022C0000002F021202300000000987
-:103980000212023400000019021202380000018401
-:103990000212023C000001830212024000000306F2
-:1039A0000212024400000019021202480000000640
-:1039B0000212024C0000030602120250000003062D
-:1039C00002120254000003060212025800000C8684
-:1039D0000212025C000003060212026000000306ED
-:1039E00002120264000000060212026800000006D3
-:1039F0000212026C000000060212027000000006B3
-:103A00000212027400000006021202780000000692
-:103A10000212027C00000006021202800000000672
-:103A20000212028400000006021202880000000652
-:103A30000212028C00000006021202900000000632
-:103A40000212029400000006021202980000000612
-:103A50000212029C00000006021202A000000306EF
-:103A6000021202A400000013021202A800000006C5
-:103A7000021202B000001004021202B4000010048E
-:103A80000212032400106440021203280010644054
-:103A9000021205B400000001021201B00000000192
-:103AA0000600A000000000160200A0EC5554000023
-:103AB0000200A0F0555555550200A0F400005555E0
-:103AC0000200A0F8F00000000200A0FC5554000025
-:103AD0000200A100555555550200A104000055559E
-:103AE0000200A108F00000000200A18C5554000063
-:103AF0000200A190555555550200A194000055555E
-:103B00000200A198F00000000200A19C000000004B
-:103B10000200A1A0000100000200A1A400005014B6
-:103B20000200A1A8000000000200A45C00000C003C
-:103B30000200A61C000000030200A06CFF5C000055
-:103B40000200A070FFF55FFF0200A0740000FFFFFD
-:103B50000200A078F00003E00200A07C000000005A
-:103B60000200A0800000A0000600A0840000000564
-:103B70000200A0980FE000000600A09C00000007D3
-:103B80000200A0B8000004000600A0BC0000000372
-:103B90000200A0C8000010000600A0CC0000000336
-:103BA0000200A0D8000040000600A0DC00000003D6
-:103BB0000200A0E8000100000600A22C00000004A2
-:103BC0000200A10CFF5C00000200A110FFF55FFFE6
-:103BD0000200A1140000FFFF0200A118F00003E0A2
-:103BE0000200A11C000000000200A1200000A000B3
-:103BF0000600A124000000050200A1380FE000002B
-:103C00000600A13C000000070200A15800000800C7
-:103C10000600A15C000000030200A1680000200073
-:103C20000600A16C000000030200A17800008000E3
-:103C30000600A17C000000030200A1880002000031
-:103C40000600A23C0000000400000000000000008C
-:103C50000000003100000000000000000000000033
-:103C60000000000000000000000000000000000054
-:103C700000000000000000000000000000310032E1
-:103C80000000000000000000000000000000000034
-:103C90000000000000000000000000000000000024
-:103CA000000000000000000000320056000000008C
-:103CB0000000000000000000000000000000000004
-:103CC00000000000000000000000000000000000F4
-:103CD000000000000056008C000000000000000002
-:103CE000008C009000900094009400980098009C34
-:103CF000009C00A000A000A400A400A800A800ACA4
-:103D000000AC00B100B100B300B300B5000000008A
-:103D100000000000000000000000000000000000A3
-:103D200000000000000000000000000000B50102DB
-:103D30000102010A010A01120112011B011B0124E7
-:103D40000124012D012D01360136013F013F0148BB
-:103D5000014801510151015A00000000000000001B
-:103D60000000000000000000000000000000000053
-:103D70000000000000000000000000000000000043
-:103D80000000000000000000000000000000000033
-:103D90000000000000000000000000000000000023
-:103DA0000000000000000000000000000000000013
-:103DB0000000000000000000000000000000000003
-:103DC00000000000000000000000000000000000F3
-:103DD00000000000000000000000000000000000E3
-:103DE00000000000000000000000000000000000D3
-:103DF00000000000000000000000000000000000C3
-:103E00000000000000000000015A015F00000000F7
-:103E100000000000015F0160016001610161016259
-:103E2000016201630163016401640165016501666A
-:103E300001660167000000000000000000000000B3
-:103E40000000000000000000000000000000000072
-:103E50000000000000000000000000000000000062
-:103E60000167016C016C0179017901860000000095
-:103E70000000000000000000000000000000000042
-:103E80000000000000000000000000000000000032
-:103E90000000000000000000000000000000000022
-:103EA0000000000000000000000000000000000012
-:103EB00000000000000000000186018700000000F3
-:103EC00000000000000000000000000000000000F2
-:103ED00000000000000000000000000000000000E2
-:103EE00000000000018701BE00000000000000008B
-:103EF00000000000000000000000000000000000C2
-:103F000000000000000000000000000000000000B1
-:103F100001BE01E9000000000000000000000000F8
-:103F20000000000000000000000000000000000091
-:103F300000000000000000000000000001E9021A7B
-:103F40000000000000000000021A022102210228E5
-:103F50000228022F022F02360236023D023D0244A1
-:103F60000244024B024B02520252028A000000003D
-:103F700000000000028A028E028E029202920296D5
-:103F80000296029A029A029E029E02A202A202A631
-:103F900002A602AA02AA02FA02FA031103110328D6
-:103FA0000328032B032B032E032E03310331033489
-:103FB000033403370337033A033A033D033D034019
-:103FC00003400381038103880388038F038F0393D6
-:103FD000039303970397039B039B039F039F03A3F1
-:103FE00003A303A703A703AB03AB03AF03AF03B064
-:103FF00000000000000000000000000000000000C1
-:1040000000000000000000000000000000000000B0
-:10401000000000000000000003B003C20000000028
-:104020000000000000000000000000000000000090
-:104030000000000000000000000000000000000080
-:104040000000000003C203D703D703DA03DA03DD5D
-:104050000000000000000000000000000000000060
-:104060000000000000000000000000000000000050
-:1040700003DD040A00000000000000000000000052
-:104080000000000000000000000000000000000030
-:10409000000000000000000000000000040A050D00
-:1040A0000000000000000000000000000000000010
-:1040B0000000000000000000000000000000000000
-:1040C0000000000000000000050D0514051405188F
-:1040D0000518051C000000000000000000000000A2
-:1040E00000000000000000000000000000000000D0
-:1040F00000000000051C055C00000000000000003E
-:10410000055C05650565056E056E05770577058017
-:1041100005800589058905920592059B059B05A4E7
-:1041200005A405FD05FD0613061306290629062D1F
-:10413000062D063106310635063506390639063DA7
-:10414000063D064106410645064506490649065014
-:10415000000000000000000000000000000000005F
-:10416000000000000000000000000000000000004F
-:10417000000000000000000006500656000000008D
-:10418000000000000000000000000000000000002F
-:10419000000000000000000000000000000000001F
-:1041A0000000000006560659000000000000000054
-:1041B00000000000000000000000000000000000FF
-:1041C00000000000000000000000000000000000EF
-:1041D0000659065F0000000000000000000000001B
-:1041E00000000000000000000000000000000000CF
-:1041F00000000000000000000000000000000000BF
-:104200000000000000000000065F066E066E067DDE
-:10421000067D068C068C069B069B06AA06AA06B996
-:1042200006B906C806C806D706D70748000000002A
-:10423000000000000000000000000000000000007E
-:10424000000000000000000000000000000000006E
-:10425000000000000748075B075B076C076C077DE1
-:10426000000000000000000000000000000000004E
-:10427000000000000000000000000000000000003E
-:10428000000000000000000000000000000000002E
-:10429000000000000000000000000000000000001E
-:1042A000000000000000000000000000000000000E
-:1042B00000000000000000000000000000000000FE
-:1042C00000000000000000000000000000000000EE
-:1042D00000000000000000000000000000000000DE
-:1042E00000010000000204C00003098000040E4029
-:1042F00000051300000617C000071C8000082140BD
-:1043000000092600000A2AC0000B2F80000C344050
-:10431000000D3900000E3DC0000F428000104740E4
-:1043200000114C00001250C00013558000145A4078
-:1043300000155F00001663C00017688000186D400C
-:1043400000197200001A76C0001B7B80001C8040A0
-:10435000001D8500001E89C0001F8E800020934034
-:10436000000020000000400000006000000080000D
-:104370000000A0000000C0000000E00000010000FC
-:1043800000012000000140000001600000018000E9
-:104390000001A0000001C0000001E00000020000D8
-:1043A00000022000000240000002600000028000C5
-:1043B0000002A0000002C0000002E00000030000B4
-:1043C00000032000000340000003600000038000A1
-:1043D0000003A0000003C0000003E0000004000090
-:1043E000000420000004400000046000000480007D
-:1043F0000004A0000004C0000004E000000500006C
-:104400000005200000054000000560000005800058
-:104410000005A0000005C0000005E0000006000047
-:104420000006200000064000000660000006800034
-:104430000006A0000006C0000006E0000007000023
-:104440000007200000074000000760000007800010
-:104450000007A0000007C0000007E00000080000FF
-:1044600000082000000840000008600000088000EC
-:104470000008A0000008C0000008E00000090000DB
-:1044800000092000000940000009600000098000C8
-:104490000009A0000009C0000009E000000A0000B7
-:1044A000000A2000000A4000000A6000000A8000A4
-:1044B000000AA000000AC000000AE000000B000093
-:1044C000000B2000000B4000000B6000000B800080
-:1044D000000BA000000BC000000BE000000C00006F
-:1044E000000C2000000C4000000C6000000C80005C
-:1044F000000CA000000CC000000CE000000D00004B
-:10450000000D2000000D4000000D6000000D800037
-:10451000000DA000000DC000000DE000000E000026
-:10452000000E2000000E4000000E6000000E800013
-:10453000000EA000000EC000000EE000000F000002
-:10454000000F2000000F4000000F6000000F8000EF
-:10455000000FA000000FC000000FE00000100000DE
-:1045600000102000001040000010600000108000CB
-:104570000010A0000010C0000010E00000110000BA
-:1045800000112000001140000011600000118000A7
-:104590000011A0000011C0000011E0000012000096
-:1045A0000012200000124000001260000012800083
-:1045B0000012A0000012C0000012E0000013000072
-:1045C000001320000013400000136000001380005F
-:1045D0000013A0000013C0000013E000001400004E
-:1045E000001420000014400000146000001480003B
-:1045F0000014A0000014C0000014E000001500002A
-:104600000015200000154000001560000015800016
-:104610000015A0000015C0000015E0000016000005
-:1046200000162000001640000016600000168000F2
-:104630000016A0000016C0000016E00000170000E1
-:1046400000172000001740000017600000178000CE
-:104650000017A0000017C0000017E00000180000BD
-:1046600000182000001840000018600000188000AA
-:104670000018A0000018C0000018E0000019000099
-:104680000019200000194000001960000019800086
-:104690000019A0000019C0000019E000001A000075
-:1046A000001A2000001A4000001A6000001A800062
-:1046B000001AA000001AC000001AE000001B000051
-:1046C000001B2000001B4000001B6000001B80003E
-:1046D000001BA000001BC000001BE000001C00002D
-:1046E000001C2000001C4000001C6000001C80001A
-:1046F000001CA000001CC000001CE000001D000009
-:10470000001D2000001D4000001D6000001D8000F5
-:10471000001DA000001DC000001DE000001E0000E4
-:10472000001E2000001E4000001E6000001E8000D1
-:10473000001EA000001EC000001EE000001F0000C0
-:10474000001F2000001F4000001F6000001F8000AD
-:10475000001FA000001FC000001FE000002000009C
-:104760000020200000204000002060000020800089
-:104770000020A0000020C0000020E0000021000078
-:104780000021200000214000002160000021800065
-:104790000021A0000021C0000021E0000022000054
-:1047A0000022200000224000002260000022800041
-:1047B0000022A0000022C0000022E0000023000030
-:1047C000002320000023400000236000002380001D
-:1047D0000023A0000023C0000023E000002400000C
-:1047E00000242000002440000024600000248000F9
-:1047F0000024A0000024C0000024E00000250000E8
-:1048000000252000002540000025600000258000D4
-:104810000025A0000025C0000025E00000260000C3
-:1048200000262000002640000026600000268000B0
-:104830000026A0000026C0000026E000002700009F
-:10484000002720000027400000276000002780008C
-:104850000027A0000027C0000027E000002800007B
-:104860000028200000284000002860000028800068
-:104870000028A0000028C0000028E0000029000057
-:104880000029200000294000002960000029800044
-:104890000029A0000029C0000029E000002A000033
-:1048A000002A2000002A4000002A6000002A800020
-:1048B000002AA000002AC000002AE000002B00000F
-:1048C000002B2000002B4000002B6000002B8000FC
-:1048D000002BA000002BC000002BE000002C0000EB
-:1048E000002C2000002C4000002C6000002C8000D8
-:1048F000002CA000002CC000002CE000002D0000C7
-:10490000002D2000002D4000002D6000002D8000B3
-:10491000002DA000002DC000002DE000002E0000A2
-:10492000002E2000002E4000002E6000002E80008F
-:10493000002EA000002EC000002EE000002F00007E
-:10494000002F2000002F4000002F6000002F80006B
-:10495000002FA000002FC000002FE000003000005A
-:104960000030200000304000003060000030800047
-:104970000030A0000030C0000030E0000031000036
-:104980000031200000314000003160000031800023
-:104990000031A0000031C0000031E0000032000012
-:1049A00000322000003240000032600000328000FF
-:1049B0000032A0000032C0000032E00000330000EE
-:1049C00000332000003340000033600000338000DB
-:1049D0000033A0000033C0000033E00000340000CA
-:1049E00000342000003440000034600000348000B7
-:1049F0000034A0000034C0000034E00000350000A6
-:104A00000035200000354000003560000035800092
-:104A10000035A0000035C0000035E0000036000081
-:104A2000003620000036400000366000003680006E
-:104A30000036A0000036C0000036E000003700005D
-:104A4000003720000037400000376000003780004A
-:104A50000037A0000037C0000037E0000038000039
-:104A60000038200000384000003860000038800026
-:104A70000038A0000038C0000038E0000039000015
-:104A80000039200000394000003960000039800002
-:104A90000039A0000039C0000039E000003A0000F1
-:104AA000003A2000003A4000003A6000003A8000DE
-:104AB000003AA000003AC000003AE000003B0000CD
-:104AC000003B2000003B4000003B6000003B8000BA
-:104AD000003BA000003BC000003BE000003C0000A9
-:104AE000003C2000003C4000003C6000003C800096
-:104AF000003CA000003CC000003CE000003D000085
-:104B0000003D2000003D4000003D6000003D800071
-:104B1000003DA000003DC000003DE000003E000060
-:104B2000003E2000003E4000003E6000003E80004D
-:104B3000003EA000003EC000003EE000003F00003C
-:104B4000003F2000003F4000003F6000003F800029
-:104B5000003FA000003FC000003FE000003FE00138
-:104B600000000000000001FF0000020000007FF8CC
-:104B700000007FF800000CDF0000150000000001BD
-:104B80000000000100000001FFFFFFFFFFFFFFFF2B
-:104B9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
-:104BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15
-:104BB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
-:104BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5
-:104BD000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5
-:104BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD5
-:104BF000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5
-:104C0000FFFFFFFFFFFFFFFFFFFFFFFF00000000B0
-:104C1000FFFFFFFF00000000FFFFFFFFFFFFFFFFA0
-:104C200000000000FFFFFFFF00000000FFFFFFFF8C
-:104C3000FFFFFFFF00000000FFFFFFFF000000007C
-:104C4000FFFFFFFF0000000300BEBC20FFFFFFFFCF
-:104C500000000000FFFFFFFF00000000FFFFFFFF5C
-:104C60000000000300BEBC20FFFFFFFF00000000AB
-:104C7000FFFFFFFF00000000FFFFFFFF0000000339
-:104C800000BEBC20FFFFFFFF00000000FFFFFFFF92
-:104C900000000000FFFFFFFF0000000300BEBC207B
-:104CA000FFFFFFFF00000000FFFFFFFF000000000C
-:104CB000FFFFFFFF0000000300BEBC20FFFFFFFF5F
-:104CC00000000000FFFFFFFF00000000FFFFFFFFEC
-:104CD0000000000300BEBC2000002000000040C017
-:104CE00000006180000082400000A3000000C3C0FB
-:104CF0000000E4800001054000012600000146C0DC
-:104D000000016780000188400001A9000001C9C0BE
-:104D10000001EA8000020B4000022C0000024CC09F
-:104D200000026D8000028E400002AF000002CFC082
-:104D30000002F0800003114000033200000352C063
-:104D400000037380000394400003B5000003D5C046
-:104D50000003F6800004174000043800000458C027
-:104D60000004798000049A40000080000001038064
-:104D70000001870000020A8000028E0000031180FB
-:104D8000000395000004188000049C0000051F80AB
-:104D90000005A300000626800006AA0000072D805B
-:104DA0000007B100000834800008B80000093B800B
-:104DB0000009BF00000A4280000AC600000B4980BB
-:104DC000000BCD00000C5080000CD400000D57806B
-:104DD000000DDB0000007FF800007FF80000193EA6
-:104DE0000000350000001900001000000000000065
-:104DF00000000000FFFFFFFF400000004000000037
-:104E000040000000400000004000000040000000A2
-:104E10004000000040000000400000004000000092
-:104E20004000000040000000400000004000000082
-:104E30004000000040000000400000004000000072
-:104E40004000000040000000400000004000000062
-:104E50004000000040000000400000004000000052
-:104E60004000000040000000400000004000000042
-:104E7000400000004000000000007FF800007FF8C4
-:104E8000000005C700001500FFFFFFFFFFFFFFFF49
-:104E9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
-:104EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12
-:104EB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
-:104EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2
-:104ED000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2
-:104EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD2
-:104EF000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2
-:104F0000FFFFFFFFFFFFFFFF400000004000000029
-:104F10004000000040000000400000004000000091
-:104F20004000000040000000400000004000000081
-:104F30004000000040000000400000004000000071
-:104F40004000000040000000400000004000000061
-:104F50004000000040000000400000004000000051
-:104F60004000000040000000400000004000000041
-:104F70004000000040000000400000004000000031
-:104F800040000000400000000000100000002080F1
-:104F900000003100000041800000520000006280EB
-:104FA0000000730000008380000094000000A480D3
-:104FB0000000B5000000C5800000D6000000E680BB
-:104FC0000000F700000107800001180000012880A0
-:104FD000000139000001498000015A0000016A8087
-:104FE00000017B0000018B8000019C000001AC806F
-:104FF0000001BD000001CD800001DE000001EE8057
-:105000000001FF0000007FF800007FF80000112E73
-:105010000000350010000000000028AD0000000076
-:105020000001000100070205CCCCCCC5FFFFFFFF4B
-:10503000FFFFFFFF7058103C000000000000000060
-:1050400000000001CCCC0201CCCCCCCCCCCC0201F9
-:10505000CCCCCCCCCCCC0201CCCCCCCCCCCC0201BA
-:10506000CCCCCCCCCCCC0201CCCCCCCCCCCC0201AA
-:10507000CCCCCCCCCCCC0201CCCCCCCCCCCC02019A
-:10508000CCCCCCCC00000000FFFFFFFF40000000B4
-:105090004000000040000000400000004000000010
-:1050A0004000000040000000400000004000000000
-:1050B00040000000400000004000000040000000F0
-:1050C00040000000400000004000000040000000E0
-:1050D00040000000400000004000000040000000D0
-:1050E00040000000400000004000000040000000C0
-:1050F00040000000400000004000000040000000B0
-:10510000400000004000000040000000002625A0F4
-:1051100000000000002625A000000000002625A0B9
-:1051200000000000002625A000000000000E023252
-:10513000011600D60010000000000000002625A087
-:1051400000000000002625A000000000002625A089
-:1051500000000000002625A00000000000720236BA
-:10516000012300F300100000000000000000FFFF1A
-:10517000000000000000FFFF000000000000FFFF33
-:10518000000000000000FFFF000000000000FFFF23
-:10519000000000000000FFFF000000000000FFFF13
-:1051A000000000000000FFFF000000000000FFFF03
-:1051B000000000000000FFFF000000000000FFFFF3
-:1051C000000000000000FFFF000000000000FFFFE3
-:1051D000000000000000FFFF000000000000FFFFD3
-:1051E000000000000000FFFF000000000000FFFFC3
-:1051F000000000000000FFFF000000000000FFFFB3
-:10520000000000000000FFFF000000000000FFFFA2
-:10521000000000000000FFFF000000000000FFFF92
-:10522000000000000000FFFF000000000000FFFF82
-:10523000000000000000FFFF000000000000FFFF72
-:10524000000000000000FFFF000000000000FFFF62
-:10525000000000000000FFFF000000000000FFFF52
-:10526000000000000000FFFF000000000000FFFF42
-:10527000000000000000FFFF000000000000FFFF32
-:10528000000000000000FFFF000000000000FFFF22
-:10529000000000000000FFFF000000000000FFFF12
-:1052A000000000000000FFFF000000000000FFFF02
-:1052B000000000000000FFFF000000000000FFFFF2
-:1052C000000000000000FFFF000000000000FFFFE2
-:1052D000000000000000FFFF000000000000FFFFD2
-:1052E000000000000000FFFF000000000000FFFFC2
-:1052F000000000000000FFFF000000000000FFFFB2
-:10530000000000000000FFFF000000000000FFFFA1
-:10531000000000000000FFFF000000000000FFFF91
-:10532000000000000000FFFF000000000000FFFF81
-:10533000000000000000FFFF000000000000FFFF71
-:10534000000000000000FFFF000000000000FFFF61
-:10535000000000000000FFFF000000000000FFFF51
-:10536000000000000000FFFF00000000FFFFFFF34F
-:10537000318FFFFF0C30C30CC30C30C3CF3CF300A4
-:10538000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FF
-:1053900030EFFFFF0C30C30CC30C30C3CF3CF30025
-:1053A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D9
-:1053B000305FFFFF0C30C30CC30C30C3CF3CF30095
-:1053C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B3
-:1053D0001CBFFFFF0C30C305C30C30C3CF3000141B
-:1053E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF29A
-:1053F000304FFFFF0C30C30CC30C30C3CF3CF30065
-:10540000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6D
-:10541000302FFFFF0C30C30CC30C30C3CF3CF30064
-:10542000F3CF3CF30010CF3CCDCDCDCDFFFFFFF748
-:1054300031EFFFFF0C30C30CC30C30C3CF3CF30083
-:10544000F3CF3CF30020CF3CCDCDCDCDFFFFFFF51A
-:10545000302FFFFF0C30C30CC30C30C3CF3CF30024
-:10546000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DC
-:10547000318FFFFF0C30C30CC30C30C3CF3CF300A3
-:10548000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FE
-:10549000310FFFFF0C30C30CC30C30C3CF3CF30003
-:1054A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D8
-:1054B000305FFFFF0C30C30CC30C30C3CF3CF30094
-:1054C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B2
-:1054D0001CBFFFFF0C30C305C30C30C3CF3000141A
-:1054E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF299
-:1054F000304FFFFF0C30C30CC30C30C3CF3CF30064
-:10550000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6C
-:10551000302FFFFF0C30C30CC30C30C3CF3CF30063
-:10552000F3CF3CF30010CF3CCDCDCDCDFFFFFFF747
-:1055300030EFFFFF0C30C30CC30C30C3CF3CF30083
-:10554000F3CF3CF30020CF3CCDCDCDCDFFFFFFF519
-:10555000304FFFFF0C30C30CC30C30C3CF3CF30003
-:10556000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DB
-:1055700031EFFFFF0C30C30CC30C30C3CF3CF30042
-:10558000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FD
-:10559000310FFFFF0C30C30CC30C30C3CF3CF30002
-:1055A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D7
-:1055B000305FFFFF0C30C30CC30C30C3CF3CF30093
-:1055C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B1
-:1055D0001CBFFFFF0C30C305C30C30C3CF30001419
-:1055E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF298
-:1055F000304FFFFF0C30C30CC30C30C3CF3CF30063
-:10560000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6B
-:10561000302FFFFF0C30C30CC30C30C3CF3CF30062
-:10562000F3CF3CF30010CF3CCDCDCDCDFFFFFF97A6
-:10563000056FFFFF0C30C30CC30C30C3CF3CC00060
-:10564000F3CF3CF30020CF3CCDCDCDCDFFFFFFF518
-:10565000310FFFFF0C30C30CC30C30C3CF3CF30041
-:10566000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DA
-:10567000320FFFFF0C30C30CC30C30C3CF3CF30020
-:10568000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FC
-:10569000310FFFFF0C30C30CC30C30C3CF3CF30001
-:1056A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D6
-:1056B000305FFFFF0C30C30CC30C30C3CF3CF30092
-:1056C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B0
-:1056D0001CBFFFFF0C30C305C30C30C3CF30001418
-:1056E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF297
-:1056F000304FFFFF0C30C30CC30C30C3CF3CF30062
-:10570000F3CF3CF30008CF3CCDCDCDCDFFFFFF8ADA
-:10571000042FFFFF0C30C30CC30C30C3CF3CC000C0
-:10572000F3CF3CF30010CF3CCDCDCDCDFFFFFF97A5
-:1057300005CFFFFF0C30C30CC30C30C3CF3CC000FF
-:10574000F3CF3CF30020CF3CCDCDCDCDFFFFFFF517
-:10575000310FFFFF0C30C30CC30C30C3CF3CF30040
-:10576000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3D9
-:10577000316FFFFF0C30C30CC30C30C3CF3CF300C0
-:10578000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FB
-:10579000302FFFFF0C30C30CC30C30C3CF3CF300E1
-:1057A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D5
-:1057B000305FFFFF0C30C30CC30C30C3CF3CF30091
-:1057C000F3CF3CF30002CF3CCDCDCDCDFFFFFFF6B4
-:1057D00030BFFFFF0C30C30CC30C30C3CF3CF314FD
-:1057E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF296
-:1057F000304FFFFF0C30C30CC30C30C3CF3CF30061
-:10580000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA69
-:10581000302FFFFF0C30C30CC30C30C3CF3CF30060
-:10582000F3CF3CF30010CF3CCDCDCDCDFFFFFFF744
-:1058300031CFFFFF0C30C30CC30C30C3CF3CF3009F
-:10584000F3CF3CF30020CF3CCDCDCDCDFFFFFFF01B
-:10585000307FFFFF0C30C30CC30C30C3CF3CF300D0
-:10586000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCC
-:1058700030CFFFFF0C30C30CC30C30C3CF3CF3CC94
-:10588000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEC
-:1058900030CFFFFF0C30C30CC30C30C3CF3CF3CC74
-:1058A000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFCB
-:1058B00030CFFFFF0C30C30CC30C30C3CF3CF3CC54
-:1058C000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFAA
-:1058D00030CFFFFF0C30C30CC30C30C3CF3CF3CC34
-:1058E000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF88
-:1058F00030CFFFFF0C30C30CC30C30C3CF3CF3CC14
-:10590000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF63
-:1059100030CFFFFF0C30C30CC30C30C3CF3CF3CCF3
-:10592000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF3B
-:1059300030CFFFFF0C30C30CC30C30C3CF3CF3CCD3
-:10594000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF0B
-:1059500030CFFFFF0C30C30CC30C30C3CF3CF3CCB3
-:10596000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCB
-:1059700030CFFFFF0C30C30CC30C30C3CF3CF3CC93
-:10598000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEB
-:1059900030CFFFFF0C30C30CC30C30C3CF3CF3CC73
-:1059A000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFCA
-:1059B00030CFFFFF0C30C30CC30C30C3CF3CF3CC53
-:1059C000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFA9
-:1059D00030CFFFFF0C30C30CC30C30C3CF3CF3CC33
-:1059E000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF87
-:1059F00030CFFFFF0C30C30CC30C30C3CF3CF3CC13
-:105A0000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF62
-:105A100030CFFFFF0C30C30CC30C30C3CF3CF3CCF2
-:105A2000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF3A
-:105A300030CFFFFF0C30C30CC30C30C3CF3CF3CCD2
-:105A4000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF0A
-:105A500030CFFFFF0C30C30CC30C30C3CF3CF3CCB2
-:105A6000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCA
-:105A700030CFFFFF0C30C30CC30C30C3CF3CF3CC92
-:105A8000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEA
-:105A900030CFFFFF0C30C30CC30C30C3CF3CF3CC72
-:105AA000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFC9
-:105AB00030CFFFFF0C30C30CC30C30C3CF3CF3CC52
-:105AC000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFA8
-:105AD00030CFFFFF0C30C30CC30C30C3CF3CF3CC32
-:105AE000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF86
-:105AF00030CFFFFF0C30C30CC30C30C3CF3CF3CC12
-:105B0000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF61
-:105B100030CFFFFF0C30C30CC30C30C3CF3CF3CCF1
-:105B2000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF39
-:105B300030CFFFFF0C30C30CC30C30C3CF3CF3CCD1
-:105B4000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF09
-:105B500030CFFFFF0C30C30CC30C30C3CF3CF3CCB1
-:105B6000F3CF3CF30040CF3CCDCDCDCD000C0000B9
-:105B7000000700C000028130000B815800020210B3
-:105B800000010230000F024000010330000C000051
-:105B9000000800C000028140000B81680002022062
-:105BA0000001024000070250000202C0000F000086
-:105BB000000800F000028170000B81980002025082
-:105BC00000010270000B8280000803380010000002
-:105BD0000008010000028180000B81A80002026021
-:105BE00000018280000E829800080380000B0000F4
-:105BF000000100B0000280C0000580E80002014002
-:105C000000010160000E017000038250CCCCCCCCAE
-:105C1000CCCCCCCCCCCCCCCCCCCCCCCC00002000D4
-:105C2000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCB4
-:105C300000002000CCCCCCCCCCCCCCCCCCCCCCCCB4
-:105C4000CCCCCCCC04002000000000000000000000
-:105C50001F8B080000000000000BFB51CFC0F003B9
-:105C60008A59051918AC84117C7A607E4ECAF43BBF
-:105C7000F232303803B12B103700F1616E06862303
-:105C8000DCC4EBBF2C8F6087CA32303402F11E694E
-:105C900006063B3984B8B90203C30A203F0B2AF633
-:105CA0001E4897CA53E6EEC182B55531C5349411EA
-:105CB0006C1D2CF2C858174DBE5D1995AF4740FFBB
-:105CC00040E32C1D54FE742D08FD4D1B4267A3C9F3
-:105CD000CF80CAFB40FD95A383DD5C5F22FD9DCA9A
-:105CE00082CA8F47E3B731A2F2CD3850F94950F557
-:105CF00000CDA28F7AC80300000000000000000061
-:105D00001F8B080000000000000BED7D0D7854D5BE
-:105D1000B5E83A73CEFC25672693908409093009CB
-:105D200021441B700C3F0D16EB097F8636D70E14ED
-:105D3000696C150744881048A4D6874FFD3291003E
-:105D4000E17F504B43413CFC29BD97B691A2A596FB
-:105D5000D2019F165BDFF782CF7AB5B5BD23A5F8D8
-:105D6000539498774BEDBBDEFAF65A7B9FCC3927DC
-:105D7000332448BDED7BEFC6AF3DEC73F6CFFADBC5
-:105D80006BAFB5F6DA7B9C0E37148E04F818FF6EF5
-:105D900000F81715000A524FA70762D9D700E4E6AA
-:105DA0006BB16415C0D07C2D0113D8FB802BE49619
-:105DB00052ED8CE789DC9941ACD75EA00581F5D125
-:105DC0009E3B0FA2D857B411A01040F100FD19F569
-:105DD0009D81391EA8A2577FF9D8F82E03AC0994EB
-:105DE000E5603B7BFF003AC04473D90160F4C9DA37
-:105DF000790D78CBD98B7C80AC090EFDC652067725
-:105E0000B99EC0727688C1CDCA274A5FF08C62788D
-:105E10006CB8DE117653EBBB012601ACC4BE42EC7C
-:105E2000FDD884F8AE84B13C433ED4E662E5EC7222
-:105E3000A0FABEB1B1848BDA696A116B1700DE2E4D
-:105E400050B9B81EC601E468AE145CBC1EE19F2DBB
-:105E5000EA79CAADDFB361D307B21F4B4988F8585E
-:105E6000FF35EC7BA5E97BE5CCB7B0DF6C30B563E3
-:105E7000786CC37F14017C0E7CF9E7B0F3CFC26766
-:105E8000910E303D0F60727FFAA5E81623FE027076
-:105E9000BE78A1EF8FF8E0117CB8717AB2C1C1F081
-:105EA00056A73800F19E297FE4296374DC7C4A26DA
-:105EB0003A6C6E60FFC7BE6FAE73E8B152C2B3BE3C
-:105EC00088B51F29F0CC9BF8B2842C5AD7CACAEEE9
-:105ED000FE747687131ACA891A8E513F6EF66E08C1
-:105EE000932B77490FC9CDC81A464FA4CB031CEF9B
-:105EF00018FBEFE3B2143DDD063DA758E9E916F4BF
-:105F0000CCBBC74A47770DA3A31FBF5BE9A8E33FFC
-:105F100018BD1619742C80D144C7581ED177B0749F
-:105F2000CCB5D13160D031966C5050FE908E0CDEE5
-:105F3000AD9A03B259B9F735B72E23DD625A77907F
-:105F4000D5574563B586CBD16601D77AA4DF18FA59
-:105F5000E4700419BFAABA343E6F121296B3AB7440
-:105F600092772F23CB905294575552183D37563283
-:105F7000790D119C92A3A63F5CEC8FDA6F64F0A8B8
-:105F80002678367ABA3C122B6F63F0C624AC76388A
-:105F9000807269E0ED0E392CF45682593679E7703B
-:105FA0001AF06DD3F87C36C141EFA1BBAB436270F0
-:105FB0005E9CE1800DD2C0FD6EEDEBC7DABFBDDFA8
-:105FC00001E14B06BCE50CBF8B2FCAE10D8C3E1BDB
-:105FD000435D1D28E75BA7737CFBF3F90AC7EBE978
-:105FE000F1944F308D17EEF104D2EAB72B1C0772F3
-:105FF000AD78D504BC81AA2B1F07020B4622FF33C4
-:10600000F1E3AF067F88C16FA293B73C2061FFDE4A
-:10601000B10F7B80E6FD610FC2611FA71FBCB67187
-:10602000EDE32895314DA1924D1F057400937EA19B
-:106030003A217C727D921DB6EA196FA54DBF84ACE2
-:106040006545E81BC5A66F3EB0EBEB0983D4335A18
-:1060500023C11B12708198CFA3C47C9E762819F4AB
-:1060600030FA95EF32F4F5033FAF64F27040E8EB9D
-:10607000039D407AF64017D3D734AFB9BE1EC7414F
-:1060800083AA6FBEEC40FCF7F6E91B2B7DCAE2DA6F
-:1060900054D43BE5F1B003FB29DBC4F54D59478BE4
-:1060A00003F9344EE82D38CAE9E061FF99F5759996
-:1060B0001867D42E2B1DCB90BEAC5DD511DBFB1A1F
-:1060C000BEEE958189AE6CBCADF80F46AF6112A3F0
-:1060D000E367D8BF474305D171CA20D73D4147BBCD
-:1060E000BE2EC3B147313A3ECAF435C36F6480D384
-:1060F000B1BDC3010ED48FBB1CA41FC794461C584E
-:10610000CFD0DB0234A814F8EF13EB9D01E7A8070A
-:106110007A6A51B99743CF0937EB27771384132154
-:10612000D4D325B538CEE371AEA7CBE3E0889AECA3
-:10613000A15C01CFE3D37B5F1CC3EAF5C69530A217
-:10614000B91F420E4F698AAEC67A3B52C8E93F601A
-:106150002D931CDAF93852C8A59D3E6374ABFC96AA
-:106160003F6AE3C7266B79A44DAEEB0D7E18723DF6
-:10617000487EB81588B9F3B0AC937DE761342A60E6
-:1061800065F907CF6928D76A277F97DBE1D04B995C
-:10619000DCFADA7959E950F45A36EE6D6880B1F2DA
-:1061A000E818E86897CAD33548327A8F0E244066DB
-:1061B000EF474E87B06C9A2F869D69F06F94A0DFF1
-:1061C00028616FE43CD8EB45397F3CC0E88E7C7F8A
-:1061D0004011ED7BBC91B129BADBF5C3571AAC7401
-:1061E000BF39926DA1D7ACD0104B79FCA96197E46F
-:1061F00093A13F0C3932E8D68F0F312BDF7CD3AD22
-:10620000DFEDFAA74DB2E99F41F2C975122AD18E8E
-:1062100019E3C80AEF2DED5FEF61C921EC218F7EF4
-:10622000968DB70024C861FD2F87E408A4F7513587
-:1062300044DF5738928558BE003DDB878F4AF53FD3
-:106240004281A3520E53DA8CBCAB1848C33C90C8B1
-:1062500026BB18229E422201D14562FFBB95E44530
-:106260007120BD8A03FC3DC472142C07C1F80B5980
-:10627000ECC4A2552FFC5962F353124F19F9C8C64A
-:10628000774294E4C103712A6741173D55E8A6A7F8
-:106290001F7AE819808084CF3C08D313AED69F4A7A
-:1062A000901E7D2040F4F4FE0E3ECE4EE1B346F04B
-:1062B0006D1844BE2F4D443E24C023A7E4D02BE6E6
-:1062C00037B3D7482F7B2A99FC96A27FC0D6D52A10
-:1062D0009AFFDC9F99DE134379CE51615884BDDF6C
-:1062E000D81A20FDBCB9D543CF0EA16F4AAE796153
-:1062F000C71DEC9F8F8CAD79732F7B9E68DBAEA1A1
-:106300005DD33196EB97A1D3BBEB46A19D58AF70FF
-:10631000BBB09DDBAD39825A1DA393FA6A567FCB81
-:10632000DD9EB0797D31F4D096EB9307F7B1EF7A2B
-:106330004B167DD7A70B7BEC23C67FC30F42FA8594
-:1063400005DFEA136487B2F7311FABEFF990213F05
-:106350009E7D0FF6B4A6D33F1D6559A4FF3A4EAEFD
-:1063600087105BE7435A4C23BB760A33594BC9BEAF
-:1063700075C4AA70F6457F2531FAE6C40292A622BA
-:106380007D40C2761E740891BE4A3C68B657FBFA3F
-:106390001F1E0B2E64FDC5AE77850F90F88063DE5F
-:1063A000D8CC72BFBEEDDEAF6A69EC27BF4322FED8
-:1063B0009EBCBEB008FD5D17048AB227E03C72C1E6
-:1063C000015C9FAE5F3C329AA65D6A3E19F651FAB7
-:1063D00067A6766E195ABA4CFD963B1CA42FC1E1F4
-:1063E000A1676E09979750A5909B18687A1A3BF39E
-:1063F000F3027E8F128380B0A73F4D7ABD2D713896
-:10640000D74BD0D095061E1DE19988F3A02986FEB2
-:10641000404E1B9757A6B534AC1F52F8D3A87FA3A4
-:10642000A8FFA4C0E332F44DE1A3386FF307A9EF4E
-:1064300070DC34F884C5F89733EED651688C062C9E
-:1064400074B7F3B36F7C8797EA5DBC7E7B10FDE782
-:106450004C70865A58DDA1EC592F9E55E25949BA25
-:10646000BDDF7897DBDF144788F0B4F70BFBB9FD8D
-:106470009423D6A913935D34CF873F00229E62D523
-:106480001BC3991F89FA4D3FC8167809F5062F3F9F
-:10649000B61FC89EEABDE721B23B4B50AFCA18E712
-:1064A00088D23C2E8510950DFDB616F51D7B5E84B9
-:1064B000C82D8E02D42B5D27515FD64FB87B6ABAA8
-:1064C00078D11DC6FCB88CF5E8F3ECB9C013B9134C
-:1064D000FB57C3A735B66243EE5C29969DD37F5E1A
-:1064E00031F10CCE31CF873EB9E0F3A91DE5BD8A6D
-:1064F000CF9BD9AC5C579E1E4EBDED6291B0FB8622
-:10650000917FA3C0B039A6F9A83FC8E6156BF7B8CC
-:10651000E8CF78BF5DE017FB04F3A08E3D03615D1B
-:106520004375394F6F7122DF6E96A26B10EFB9F58C
-:1065300091E791F5EAC16E2D2B44EF3B1C6C9CBAA0
-:10654000501C3907AAD61DC3E763F72CD4908FBD22
-:106550004C67C969FC66E399A539AC7E92DDEF1BF7
-:10656000E47CBC3A1C9F8A765865C3891388EE0286
-:106570004F7427C23524F2945680F0864E6B7926EC
-:106580007E8D14FC5AE6E0F8E73E20F8A66841E468
-:10659000C75D10D98BED039AB0BB07094726F947B1
-:1065A0003B13E93812E59DE9CDF63093F7D2D47C60
-:1065B000C811F3A15DCC87DE095CFEDB03D58174D5
-:1065C000EB8521EF86FC1BFAD05E2FF109E4FC2A53
-:1065D000F6AC8000F9311721FADF900E0C7BB26B1C
-:1065E00072A777913F67CCABFAF0E9E943183EEA2E
-:1065F000845035D2DF18F7BC90BB051EEDE7241F91
-:10660000E56D4A1EC36BCC3D101EC5EACD2ACF9561
-:10661000CCF2FE6A5FFDC8699A5FF7746B4A68E066
-:1066200076FF43E077B31479CD2C87AC9F5F615937
-:106630000D75A384F5D13924EC7BB96D21D90F4CAC
-:106640003E0348E7792D2DCFE37873AB226BB0BEC4
-:10665000D1FFAC90CD6E97A26F61BF7639AD83B894
-:106660000297B17E8C94A217B09FFA5037C19B3B22
-:106670003D4272C6E0FEE05382FB2F48D74C70BF0C
-:10668000858D516F86F7905E63F0C9328363F403A2
-:1066900009258FE87E5A41BA333A3BE582149D07BB
-:1066A0003BCFB7897936D07C6FC77F4C46BB383A31
-:1066B00004C7CF13762E244F00F7AFAC71CA19F27E
-:1066C00079403B2BB72E09181F1A724A0EDFC83EBD
-:1066D0000DAD0309ED62C38ECD13F3D180674B9FDF
-:1066E0009D1CA4F933444D06232ACED74964B73DF7
-:1066F000529B0CA29FB7B63544DF033593D6DF110A
-:10670000C2E1A304C786D6B0B0AF6BE819AFEB3DCA
-:1067100085FB025B820EB27F37B5561A71598237FC
-:10672000CFB093EBCE909DDC1BCC127EA315BE7830
-:10673000DD19CBBE87D10E82A6385619F623ECEBB5
-:1067400010D73703B5574BAC74EF6BAF0DAE7DD69A
-:10675000046BFB5A2DD981F1C400C68F100FA1F72D
-:10676000FC02C6408D83FC6483DE9E2A6B1C2E5E79
-:10677000977E1FA76F5DB08D07E559A932068B6222
-:106780008D04DF4A015FA67ED6887895517666D063
-:10679000934DB25827C57E5440C0FA88C6E8A1A6DA
-:1067A000E83144C8DD967AEE874180C7E70C3FC7E1
-:1067B00009FC7B6A3C8E379549DFC7F83836F88D7F
-:1067C000F62ED13E131C2E7B7F67593F934CFDD88C
-:1067D000E0CC049F7D7F0CDEB6F693597FD9DA9D1D
-:1067E0001F1C1FFAB503133FA99C672B0FB3D52FAE
-:1067F000B37DBFDAF6BDDA56BECE567FAAADFC0534
-:106800005BFD39B6F2576DF517DABE2FB57D5F69BE
-:106810002BFF576BFDAABB3E197DFF3FA39331AF02
-:10682000FAD345B7ECEFDAE75519244624D8736F4D
-:10683000EE4B8BF1D3BFC892728EFB243C8E058940
-:106840007111933DFE7B357A06D7B1BD1F6959A8FA
-:10685000F7F7C75FF6A33E32DE9F97DEF05F156263
-:106860007AC19558C1E33E719A3759A09C49562286
-:1068700097248A9779D44544724F397B6FD26F6ED3
-:1068800088109F5D25D6F710E7F3B01C7D7AD65FA0
-:106890006C9B8BECC15811E8A3315E94CFFBA7FA37
-:1068A000652978AB15AE9F8291782DCEE1610D5DA3
-:1068B00027F069A753705AECDA1730DEF008F7CBEF
-:1068C000F7CFB0FAD5B728DC0FB94DB96CBFE0D51A
-:1068D000F172AAFFFD0FAAE13656653F02C1CAB1A7
-:1068E000073D3AC63746605C8E6F1A505C6E38883A
-:1068F0003F117F2BC17FB376C3D55314670B350689
-:106900004EA2CE9BA354D0788F4B3D57E1788EECAE
-:10691000F3D7F2FDBCBF7C4CF17741AFE0C649C96B
-:1069200018A3176C758547139DC34467B702EDEE36
-:106930006A14134EDFD5ECB578AFF8F2D06D12FCC7
-:1069400040FD3B0AF7B575E0FE6482CA3E48523905
-:1069500047D8B9639452EE17083F9379F612FA5F5D
-:10696000C12F32BF3CCDFA315BAA1DA314A4E29320
-:106970005288C721A54D2FFC59C278572584F8FEAF
-:10698000948807AE97A58F311E1E18DCFE4EF06B63
-:1069900056BE821285D92679FE5A1F3F39BD46055B
-:1069A00039FEC1ADAE16F46BF6CFB2CA81515F5657
-:1069B0002E3B5EB17DDCA84F4F0E729551044F7F88
-:1069C00039B83580FB07528CD12D7BF074CB91B553
-:1069D000AF2A13114FA0F22149BB5529489515D074
-:1069E000E69BBFBF2A4716E0F7D854A86C5153FD69
-:1069F000B0F78B32BC5F92EE7DA961B79EE5EB7874
-:106A0000B1B0AF86B6C7C92E2D6ACACB32DB59C525
-:106A1000625DD8D3B4D08BF86E6F48AF078DE74670
-:106A2000E1F765AAA74A5D11D42B3056810369ECC2
-:106A3000F26751BE4DFA54ADB2DA5BD317C56AB1F5
-:106A4000BDBFCE01B86FC2D679B2EF8A842E7B78F3
-:106A50004A4CC2BC97F872083FC4F0F22F2AF3A642
-:106A6000B3931ED6B6D3FB1DF5876791DFC2EC3A10
-:106A700099E2E25DEBB13CA4C6011BD2EC173C21CC
-:106A8000F0DB5CCFE964FF5EE18268BA79F8AC22A2
-:106A9000F61994980485A9FD92274E147DA192C100
-:106AA0005B1C7684BDA1149CA57D765382E855516C
-:106AB000AD0430DF80297E8BBDB9A3BD7AC71D68C8
-:106AC000B7B3F768B7EFBC3E300CD78D3DB515B303
-:106AD0001A517FDFE980D1A1141C633AADF43CD197
-:106AE000373FADE3B27E6BC97FAA67E44A43872B89
-:106AF000A547A71837939CD8D755BB1C5CCEFA7016
-:106B0000937CE5F8FD00E7E144921F8AD30CAD6762
-:106B10007E5C556A1E197E8A5DCE02750B49CEB623
-:106B2000D7977911CFDEBA6AC9C5EA6DC19A69FCF7
-:106B30007163BC4CF05438A3DE00CDC385523ABA21
-:106B40001546D3C7CF35A7883F2B5109DB67AA3736
-:106B5000C229E441CCAB4231AF82535AE6D0BCD813
-:106B6000A5C0438C5E0FD755B78D26FA3948EEA6DF
-:106B70006B5CCF164EE0FB993E46AF67D9BAF7483B
-:106B8000038413ECFD23135C96FD9942411FBB3C2B
-:106B90003E32807E01B3FFC5E45F71AA7CFFB61C64
-:106BA000CAD19E7AB8EED2ED074BDF608343D39112
-:106BB000BF35D503C44DDA2E779D9A773DCA63CD94
-:106BC00020F3276CFA029EBB6BFD68C607DF2EA67A
-:106BD0002F201D7D5C167F7C207AD8E93F0EE99935
-:106BE000FDE9D1D3FE7D8853C40107498F27EBCB44
-:106BF000B6968732D7B7E363B4DB28E6DBE7A14775
-:106C0000C6F9AF4180E24B53214CCFE910A167B7E1
-:106C100012FD9293D59F092D5436E2508D0ADF97CD
-:106C2000802A3EAEB1BFAD4C03B293C78C077D2F17
-:106C3000EAE72973C4A6AFA29DF3A0D1C6E048E35A
-:106C400057013C447817DBD663234E31B4295E5F8D
-:106C5000CDFA2DAE77501CA3B8E6B0D7BC2EFBC53D
-:106C6000FC31FADBC9BEE3FABCB36970FC32EA3D21
-:106C7000A12429AFEB899A87DA70B951F2DE0EA60A
-:106C80006B6FA7EB968FBABC9134F0EC5C7494F206
-:106C9000B776D65C3A8E3290DC8C91D3DBB39F779B
-:106CA0007B896E3B733DB7F0E49C5596FC0390D511
-:106CB00052F3B83B3F82DCC8A5F489669D2F5B9CEC
-:106CC000221FC4073E94FF4CF4309E9F361D9E9CAD
-:106CD000DAB23492A67D859BDB136B722186F92292
-:106CE0004FBEAEE898DFC00496E471D22D211DEDB1
-:106CF00097355EAE979FAC05FA3E29577C7F2C44B2
-:106D0000F954C59D1073B1F5ACF8B5458FE4B27A6E
-:106D10009B16310FB234F57E53F86407EE133FF340
-:106D20008A2380F6D1246FC2136678D5887570E700
-:106D3000A29394771CDBA58447937E97409A44DE08
-:106D4000BC25AE79DCA910BC3BC30F7B716F6E47CD
-:106D50002849FD7C63F2494F88E1B7A9A4DB837819
-:106D60006EAE7998D6CBC38BCABE5C4164B5E6974C
-:106D7000CC94A7746B98BFBB88EF5BE426BB3D98AF
-:106D80009FE46F50E046069F5FE5F86E5A033AAE07
-:106D900053D5228F4482D9E41717D9F2B80A6D79F6
-:106DA0002681F0CC77709F9FF6FF1109B9E991B168
-:106DB000184F6C7688F4538DE6A94FE0E70B6B54BF
-:106DC0007FA67CCC8B790B3BDA9500AE7F015BBF55
-:106DD000763C02103DA149D40F8DB3E351BE4E065F
-:106DE000265266316B2AE00E30B887B021DBAD70D9
-:106DF0001B74B58FE3B395DF36E4B91846A31E3292
-:106E0000E2CE06FC76B9CD9FA41F7999E1BBF315BC
-:106E100095D6EB9D352F7FAD19D7F94A37E5717DB2
-:106E2000E1E2C1A6EFB3E72F3E385A8ECF2F16ED21
-:106E30009FD08C74107912463CAF107B26FB55E82E
-:106E40003563BCAA3DEDCE7C7A45F9159B4FBEDE7D
-:106E50008871E7A22620FBB748E1F2E96B77E86D7D
-:106E60000CFEFCEBE2240FC50D09025A6DE892629C
-:106E7000267B5E15F69CAF292AE13EFE8D0D712F13
-:106E8000E68BF844FCD737214E76D20CF90D4F52E1
-:106E90004DF1CFC87F37E69F9D3F158B78DE497156
-:106EA000BB1246B08B9B5A1C6487D7F07CEF8ACE0E
-:106EB0002E89FB7F3C9F9E87D4D933D2C8F30977B4
-:106EC000713BDDC8FFF63759F917E8CB9F8FD2BE6B
-:106ED0006B69A7ED7BA4EE2D2E87567E96B9043FF5
-:106EE0002B44FEA0CD4FDBDC24F6E9548F7E29BB7A
-:106EF000F6159187F32AE23FA6FFF79B33E8DF9B65
-:106F0000DC7C9F5F767477901F779D83FC383B1CF9
-:106F10005B9AB8DEDBEF7258ECF82B1DFF36A1FF51
-:106F20006547F26F327E531FFE7F9BF1EFFF1B8F91
-:106F3000BFE16F4CFF1D7F63FC0FFE07E33FAF52C5
-:106F4000B2F8697B5D1EEAEF87EEBEBC0D8BFE9644
-:106F50001DE9FDED332E87258FD8C84B9CD6A02D7B
-:106F600070A1BE0CF3731EF6FE66C82F75A01EDC62
-:106F700021F2B1991ED564CC779A6C9CD3E0FAAF1C
-:106F80004EE8BF3AA1FF0E67D0ABD5355CBF33FBEF
-:106F9000420F95E292119F5581EBF72985F28B0FF5
-:106FA000035B6650AF85DC69F3B10B05DC767D5A77
-:106FB00028F469F54BB6F7428FDAD7F9D2BEF82933
-:106FC00050FCF4BFBB447EA94DAF1A74D851C3ED39
-:106FD000E5FC39E9EDC14D363EAA135A280FC1CE62
-:106FE0008F332EEE5F1BFC58E0D17EED2AC8CCEF2C
-:106FF000A4E0F70D82DFBF7405E869E48D64E277F1
-:107000008D9B8FF359DFD9601B6213A9253EC8827F
-:107010004F326CEAA6F82F7C03CCFEE5968F981DC4
-:1070200082EBBFAA52FCECB3F9E03092ED3F32F6AE
-:10703000E9D89FB39BC751E57C97CDDFB2DBC11E7A
-:10704000CA8FDBA9F1F3563B6BF6EE5C81EBD32BD9
-:107050007C9F79676EE74B78F40DE2E31584C3B04B
-:107060001B41C467D1A4E0F928F6FD27ABDDBFF3CF
-:10707000A3AE04DA5F815229CC3C2BE8083D9C9FEB
-:10708000F63C9ECDDE57DD3E8BBF0B370ECE6E5FDE
-:107090002DF8CDFCC502B7697EAFF6CD1CCFF3A2AB
-:1070A000A607709F47D2663A309E9EA91F8CF49E19
-:1070B00033ED3B352ADA70EC4F42FFB132E53F0247
-:1070C00094F0F8BC81FF60CF0D34DDC5F7BF055DDE
-:1070D000F3AFEBFAABF891469CD7A8A72A094877FB
-:1070E0003EC81EB7BBD1A94D46FC060BFF6E143837
-:1070F000F6FCE72AB92E5DFC2029F4AB1A79EAC523
-:107100009B59D50973251EDF67669B795F6D53BE5A
-:1071100052972EDEF533314F7E894139D2EB09C8C3
-:107120009328AF04102F633EDAC7BF568C7BED1552
-:107130008EFF8A98D7D78A790D10A6FD984CE3D692
-:107140000ABD613C3FE9B8498177AD4BC4350618AB
-:1071500077B6C073F615E27B5E8C3B7B90F82E1001
-:10716000E32DB8C2713F14E32E18E4B8770BFADEB2
-:107170007D8574563C92E86770746E13E3B55DE1EB
-:10718000B801316EDB20C7DD26E8BBED0AE95C22E1
-:10719000C6DD66A373A6F9BBF70AC7ABF4F0F9B373
-:1071A0005FCC5FBB5E33C6578B1C116CBF3368ED81
-:1071B000E78B6E3EBEF184C4C7E4BF168B7DDDC98C
-:1071C0002BEE5DA8A519D7A86F5F8F338DF335110E
-:1071D000AF319EC6387EB11F3AF93A364E1AFA18C8
-:1071E000F5AF75713D98A9FFA5029EA597898751B6
-:1071F000BF16FB9F98B9FFFB041CF7D9E01FA87FBF
-:10720000A3FEEC01E0EF1070745C26FC46FD050364
-:10721000F4FF2D01C7B72E137EA3FEDD03D0E709CF
-:1072200001C7139709BF51BF6D80FE9F16703C7D4B
-:1072300099F01BF5B70D409FE7041CCF5D26FC4677
-:10724000FDFD7DF3DD3AFF54E33C50182A31DF7831
-:10725000046485E97E8370F204FA01EA2A7EBF01A4
-:1072600074D9CF4199CE4FB1297EE2BE8A18D6DFBC
-:107270007D178FFBEDBE16C88FD85D20F295455C5B
-:107280004B15F6E0EE6B791C647790E7EF832D5E8B
-:10729000B49BF93BB4EF5BC2F399D5AA3899983403
-:1072A0005CA13011439857C3CF5319F69E71AE6A53
-:1072B000B58853EDD680E254BBAB7879E774D01D26
-:1072C000A5A6F3569509CA4345C316E3B1A9F362CF
-:1072D0001AACAA36E563AC4A50BE8122F246184188
-:1072E000C09297613BA765DCA37073589B816AAE1F
-:1072F0007402DFCF2B8D58FD87263CBCC5EAFF56B4
-:10730000E8C900D64BA3670E7914CE3F91B7395721
-:10731000E06FD0AD5AF073CBEC0FBAA7313C5F9C55
-:10732000E2C44C1678F194A0E31459E7FBE7E0348B
-:10733000EBED3E39CFE00FAA9D2D27BD8C3E37BF28
-:10734000046164A36F97B6264471B58F48FE28AEDA
-:10735000C6C6BD79575C41F99BD5199A86F1C0B96B
-:107360002F8556AB987FDD09610DC9FBD1D7A99F49
-:10737000BC7608EB9C556D01B2736DF139E3BCAF7F
-:1073800088CF61B8DAEC5FCE127857B707D6E0D66F
-:107390005DF574B7C57E9D25FCCC2F696EEB394930
-:1073A00071EE7196CDCFECF458E3756A676406C64A
-:1073B000BFE5B9A7353CF73C26220586B2CFB745D5
-:1073C000B629189F9CB5AB85E7F567B80F23E7B1E1
-:1073D000393EB3FD3E46C8F32F775DDA5E37E20CE7
-:1073E00046DCE114E619BBD14F0F0ABE70B932E496
-:1073F000236FAE6491934E0FD7239D1E1EC7FF4F80
-:1074000039F9EBCAC96F3CD6F843277E63F3B12242
-:107410009C7E9FBED1E3FACFF9FA29F0C1EF4DCFA0
-:107420000768CAB1E4131B795576BA19F7C618650F
-:107430000FA43F8F57E215EBACDDAF7F235A8B785B
-:1074400019711A80FB6DFB9B53C2978A4BC8C6BD4E
-:10745000038E3764C4A7D22BF48F020AF56FC3835F
-:10746000E67D61EA3E1D7B7F6BC4791E032F677941
-:1074700044C37B56D818B4DF8779EB87AB707D0C9B
-:1074800058F0D6BC7CBDD950C9E56D43A5A2679321
-:10749000BC45ADF71695EFF5A4B32B8C2798EFAB51
-:1074A00028EB0FAFAB3C1A33C3E312F0D8FB999330
-:1074B000119E464BFCEB72E1715F05D08D72AB30D3
-:1074C0002926F9FDBAA53F47A54EE7FA33F58367AC
-:1074D00064082F1B5F328DEF29B19E5770E5675905
-:1074E000E45D51F36CF78AD8E4AB2F2E34B8F1EC9D
-:1074F000E718DBC5F9147B7BAF1287701ABA7B43A0
-:10750000F67C0C9DF8603F5FE30CD8E0B6F5BF0950
-:10751000DFA5C9F730EE195A27D6B5F58A4EF656CB
-:107520008C8189F99E6B845C2A019DEE67FAA657CF
-:107530004A8B3F84D3AFB74A797AF83D2556BABB18
-:10754000F2F3AC7C50D29FE7586FCCFBC07ECD7C71
-:10755000BF56FF797E2C7CA9F5BCEF5E2DE937F292
-:10756000C70CA5035EDB3D1683E4AFF2E11080217A
-:10757000A632D3AB18AF657384F279EDF54F1BF4E7
-:107580007B632FC16FE8E9EC5D465EED27C3439254
-:1075900040EC935BDB679C8742CFC942AE9F1F00E4
-:1075A000FF4CFCCD2A77D8E6CBE0F8EBC5798FEB22
-:1075B0009EA2894BB0ACF33ED37810E0F85EEEBCEF
-:1075C000FFA4700EA98B02EA3357300A51B6CE17CA
-:1075D00005E3B44FAE4A3D31F4C7D89C0A219F77EA
-:1075E0000E09F1F3E3A67A53593B67A923E6C43C9D
-:1075F00010089FC0FAB12074617D8CC7ECAD4AD5EC
-:10760000532588A0BCAB054A04DF1BFDE54CB1F651
-:10761000C7CC04D97C1ECBC817205787E1EF9CCC80
-:10762000FC53D6DEC5ECD03DE9F44916B743B39F11
-:10763000F3D279435F44D551248B26E894175CD468
-:107640000861F4E72A3ABB21CA3AFD26C23111BFCC
-:10765000C7E9DE85A25D71DAB7CF77F373EC454DEC
-:10766000716981699CCA2C2EDF53E778689DF87A8E
-:107670002DBFDFA23BB8305E8BE3D5F07D2F5FBE20
-:1076800002C3183D7CAFB9B9FF392109E67B23DE7F
-:107690006E85EA45A301DE6DF5D0F37C6B809E819B
-:1076A0008FFE279DE75B33715208F3472FFA1A4785
-:1076B000E2BAF17E6B90BE6F7E301CC27C22F9E490
-:1076C000EB749F444ADE6332D430BA4D486AC83FF7
-:1076D00013FE7BBDA67DFE3EBC18BE0BD8381B2515
-:1076E000C7ED381E9617929C7A649729FFC325FC34
-:1076F00046E71A883C5585F797E8D2DD55A6F75E30
-:1077000066B7E1FA3A31407C4FD1536F13F4BE169D
-:10771000FDDDA297045DE7D45C72DF64536BA27B4E
-:10772000FAE85459CD70EE6DB673EA0D591837C2A8
-:10773000439F6CBC69732A8722BD1E755ACF931B69
-:107740004F39303E5C8E7563450E9A87E27E959583
-:10775000578586E69AFA9F2DE4523EF923A26F766A
-:1077600015CF0F617FF545A6FCFF926823BFC7AF19
-:10777000859F9331F62147DE9A6CC32D8991ABAC7E
-:10778000E767668AFB504AD73828FFB57432E9505C
-:10779000286D03CAB3DA2787AB51BE1F835772F136
-:1077A000007B09836F389BAAA5316B3FFB16D7BFBF
-:1077B000807100E37E95D5EDBCBF11A1F0A910C684
-:1077C0004FAA1C642F8F84B007FB1FA93A00CF1764
-:1077D0008D02533FAC3CBCC5DAAF1DDE529FC38166
-:1077E000F10E039E1170C4A3E553FFA0B3F625CCA0
-:1077F000CD2B4E039F7D9C5146BDB1D5D509483355
-:107800002EF4B4E1BE50BFF107E8B7354BD8E13EE6
-:10781000F0A33EDF2571FC632FCAE103C8D7BB0F7D
-:1078200052BCA6646527ADEB9D59DCBE5BCBEC0179
-:10783000D589760A7B8ECE2C877280112E87D68FC3
-:10784000B4F2F76456EDD62C8C87654DDD8A7298BC
-:10785000A584BE82FCC83AE504DCC7CCD2E234FF82
-:10786000A09CDB191BABCA7270BE65B5B8D2FA6BAF
-:10787000ED594E826F5796A4605E28932DC24B69D6
-:107880000A7D6B262B7617688FE3387F2E88D2D33C
-:10789000781F5CD81042F99CB6A48AE25FBD9D12A5
-:1078A000C5BFDE927417A66A2F9BDB32EE46468F69
-:1078B000D9B9D127B0DD1239B1D6C9E0597E6B4BA9
-:1078C00005D2A71EF3FD0A70B818F7074BCE841532
-:1078D0003C1756A2249C4CBE3D8193AFF167AC1679
-:1078E000E5DD832761183FFDE5DA3BE837F9C43968
-:1078F00024197A629817E89F0270C6C437F4E9CC5D
-:1079000065DCD3359733D17FA0E722D6F6CC685C0F
-:10791000E5C39A4476814EF47305C2E3104E39787C
-:10792000AAB0DCB4CEB9057EEE690BC5FD489AF06D
-:107930006FC260F66FDD022FD4E1674CED9D416BA5
-:10794000590EFC75F130EC6EE9A7FF7E0EF9B8FA1E
-:107950006927C53DA73DED4CDCC0CACBF748B4CE86
-:10796000388E73BDFEFE7E89E67DC2E7223DF05E65
-:10797000C043E56677F796CFB172CFD332EC25B22C
-:1079800034D07D52E78CF5F4282F2F160ED2F23D1D
-:1079900027E6637F8D47DD80EBC4F21F2DB9E973C5
-:1079A000ACBC84C93156597EA0CD358C95EFD2A59B
-:1079B0002E2C5F980A2467B13C978E792D17FCDD39
-:1079C0008537ABB48E41680CEE6F7717CE65F2B891
-:1079D000547F6A26B65B7A48C2482AC3E3C00B4587
-:1079E0000CAEE5DF91687D5C76309BDFBD22E877E9
-:1079F0008EA17203FBBE92E189FA7009C46722BFAF
-:107A0000961FD8E632AF73EFB65652EA87515EFE44
-:107A10001D360E6BB7E27B5218515C81F90EB85ED1
-:107A2000FEC8DBB04F45FCDA5C153EC46B9D0BEB2A
-:107A30002DD1173CE30D217C7B5C33D9F7A5BBF638
-:107A4000B8165721DDE0765C57971DFC0CBFB3C01C
-:107A500080AB53267F6165AE672FDD6BAADAEE47F8
-:107A6000E9830B2C702D157A83F97D2EF379B76796
-:107A7000B273494E971D942DE318FC8F9D067E1E10
-:107A8000ED273E3A8F66F0CF58AF0CFEAD342EFA9C
-:107A9000537A26A583670BF283C11367FE0D3E1F41
-:107AA0006E0DD2F3D1D610F1693BD2710CCF4BC120
-:107AB000F76CDED6E23D687E0D2F0403C8ABD76AB3
-:107AC000310F332FC2CB85B746A5D025EC74E3B96F
-:107AD000DD195D8046CE94EC6FCF50983FB6DD1532
-:107AE000BD1B43D60165EF8CE96CCD6BCA8E4CCAC9
-:107AF00036EDFBAD15F7275D931D22FCD716B9882F
-:107B0000DEDB6F9BB44FC49F689DDC7EDBE22730D9
-:107B10003ECEDA7F3E1BFD0BB1FF97A97DE1FC1A3B
-:107B20004BFBC2F98D46FB99D4DE73E9F6DBE75FC8
-:107B3000671D7FFE52A3FD4D04BF7A69F80B6F9F4E
-:107B4000621DFFF6266ADFECE6FCEDC9F550BE7556
-:107B5000BB379C407D4C17A94DC07CF28ABD58CFE5
-:107B6000587798E6D7307F5B3D945BBD01CC72348B
-:107B7000753EC28179596639CAA9C9B2CCAB5C2DB0
-:107B8000CF521E5237CC52BF205266F93EB4E16A42
-:107B90009B5CAA747E91CA08141AE60C4ED7301763
-:107BA000E9A3DA61DC0EBEF7B897CAF75EC7F1BB8E
-:107BB00077984AF3186146BFFC5E57F41AF3BDADDF
-:107BC0000C2F093773EE54A3F7211EA9F72107BE26
-:107BD000CF12F94E596E207DB7AE74D2BE98899EF1
-:107BE0001DC3993CB0727BB68BD35DF061DDF0C5EF
-:107BF00041B3BDBE76B8AB01FD0D7C7F878AE345FE
-:107C0000D6E278CDAE9E0AB43BECE3B8CB6A2CE367
-:107C1000784634D238DBB2793CD518C73DA2D1368C
-:107C20008EA761AF782FC67904E52CD338EBCAAEA6
-:107C3000B3E23362298DB3DB36CEBA114B6DE36408
-:107C4000717CD87B318E7EA971DCA3A658F119D93D
-:107C500044E3FC931D9F914DB671541A07DFE3383E
-:107C6000CCF00DE17D592E77CF62E2FF4FBD64E786
-:107C7000B8DCD127C9CEF9B597EC1C564BC37A5066
-:107C8000C9FDDB7BB2F3F8BD5F598CFFAA99CF31F8
-:107C900091771023BFF84E0122E80C22A6DF560888
-:107CA000195C7468F688367C1E9D165C80FEE8A31D
-:107CB0003E8AE3BD7F749AEB8E34FAE8CEB8F35C6B
-:107CC000D224CF7D7A55C46383D97C1FD2289F13D9
-:107CD000F19F33182762CFB79C40FED059112F4A2D
-:107CE000C1DB46EDCE897DBD73BBF83A7571DB69AA
-:107CF00027BF37155EA96270CF1368DC19B7DE9312
-:107D0000D92CF8D1F323373F07045A31DD8FD73907
-:107D1000C4122FFCCDF17F7881E7DD4131DEF7FB26
-:107D2000D58EA79EC76AAF4A0B86AF64F8361CD9BA
-:107D3000E62C66E5F79DC9F961D5D44F8393CEDF74
-:107D40001B7EC82D51A7C57EFE5AA3B57C9BCD9E38
-:107D50007E23BBCCD89FE5E3867427F26B1EEEB181
-:107D60003216DE864F4ABE0B10BFE607785B039ED5
-:107D7000E6FB9D90A0F52E594071CE5801C569A231
-:107D8000C6BA65836FBED3A345183FE7DF27131D2F
-:107D9000EDF0268F676B0EE6E7243BFF9713CFF1DC
-:107DA0000C04FFEDABACDF21E6B4DC4760C8C15783
-:107DB0001A6AF79D35C9C72DD159FBCE5AE834DB75
-:107DC00052BEADE5164BFDDB572DB07C5F10BBCB33
-:107DD000F2FD8E8EBB2DE53BE3F759EA2FE96CB33C
-:107DE0007CBF4B5F6FF9BEECE0364B7979D70E4B19
-:107DF000FDE6A37B2CDF1DC7AFFA12F981BF94E922
-:107E0000BCF31FD5735BD07EFB6340A1FD9CB7C55F
-:107E1000FEDDBBE23EA015287B9371FE8CF7A0DF50
-:107E2000D09CC5E633B325C6A9056B3BA6A01E01B1
-:107E3000BA5AA35A2D5E1B63CEEE64713E51EE74A6
-:107E40004162086EAFA4E2B03D72EABB9264DFC744
-:107E500067FE2E772A69BF2B49256DBF17A49E0A9E
-:107E6000B41F63AFBBD39E034FCD4B28864BDC2F93
-:107E700079DE018D66FF6D9ECAE3432F644F9DA797
-:107E800016D071699AEF4D878BA6A2DFD0E44A54D1
-:107E9000A4DBB7E91BAF4BA27B03E7A97CBEDCA543
-:107EA000175BE269CB0E8EB2CCFBD7B2A237ABAC7C
-:107EB000DEF91332E959483C37E2CB63717C6D1E21
-:107EC000BE87A305B43EBEDAAAED3BCBFC80D75AF1
-:107ED000EBE8F9ABD6C8BEB3CC257CA3B581CABF4D
-:107EE0006D8DD233D9DA48CF33AD2DF4FD6CEB2A4A
-:107EF0002A9F6B8DD1F3EDD60E7ABEDB1AA7EFE782
-:107F00005B3BA9FC7EAB4E4F631E18F62E44843DAE
-:107F1000D9F78309BCDC2B70900B8D386698EE95F1
-:107F2000EA552F56A01DDDFB9A9BF26E33D1C92E68
-:107F30007799F9A7D17ABF58B7C6998DA7378BF330
-:107F4000C7EB803ACC91583FDA4571B4AC9F7E863E
-:107F5000EC71F65E017ECF7278769AFB3ED1FF46D9
-:107F60007E0DC427A3FEB96FFFDBA48555C89F32E1
-:107F70007EEFD773720BE7DBBEF097C70E4C3FB2B4
-:107F8000F98AFAD351FAE96F46607CEABD02839E12
-:107F9000DD2330B8A5A8911D2887BD47DC8457EFA5
-:107FA000B16C9E8F8241B541E4BF2E3BE8D5CDFA3E
-:107FB000617957AE6ED51745BA595FF49EDAE7C7B7
-:107FC00079BF3228EB67C7A37C68423EB8DC19FD55
-:107FD0002FEF2AD5554B3FD6726F5CAAA37B202189
-:107FE0009433F712F7A7AE0CBA689C770F8EA2FCF9
-:107FF00003E627EA6779BC53E7E30675B35C36AD61
-:10800000CAD6CF0E49C197A9DFBF367C0047E077BB
-:108010009ECCE771077A82F2AF2EBAE7ED98F32291
-:10802000AE3B6EF6BF8F295F48A1B2D16F73971C2C
-:1080300073E3795E3864198FB50B193EBAF9FE9C6B
-:10804000FE7CB7E683FF166589D66D7EBE3C8AE767
-:10805000CB597F1714B543BA2675BEBC59C8E57213
-:108060004FD21565AFDE3B32EA92F920EFB69E0A99
-:1080700028A3318F20EE4267A4B1EBAAE9A81FDF45
-:108080003BB2BA10E369CBE4DE7BD39D9BFD50E5A8
-:108090007136D09D3D49133E467C0680F5EB49C1C3
-:1080A0008F927ECE54B6EB6BE3E9F0F1B8FB8A43D6
-:1080B000A7677E8EC1BFE2E8072E84E3A81A75F891
-:1080C0004CF84BE27CFDD2836FBA10BFB79DB18AEA
-:1080D000FB2FA1A7FAC3A9062DFBA131E8C679BCE5
-:1080E00090FFF602CAD3577ECDA6E63BBF7002FED4
-:1080F0009E83B15F619C7B5804113FD26BE1916517
-:10810000141F7EE7992F0A7B2E3E09E5E33D70D4CC
-:10811000217EEFC1CBFEF126FA95FBB81F031DDCD3
-:108120008E31CE05327BD662D72CE9B49617C39C2C
-:1081300042D41B8B1F75822EE1FD9FA67B9818DE13
-:10814000F93E6EEF2E8196B568CF296EEE1F2C0C8E
-:108150008052CCF4E9F21F3E3609EDFECFF8F8BEAE
-:10816000A311C7B82B8FDB7B4BF37517EE27FCEE03
-:10817000C8F8799F43E973EB6B715D869CF4FB7FD4
-:10818000777458E11B087E3BBCC6B9F77EF1140139
-:10819000877C504A9B9F36D927E44EE891877C56CE
-:1081A0003B7F9DAD5CEF1371561964E4F37B014F87
-:1081B000CC9143DFE99C6DECB03BBC3A84F76A4557
-:1081C00022285FCC2E1807A67ABF57A3F4FEBCF472
-:1081D000D2623A67AE24C6513E9E07284FD125E4AD
-:1081E00041CEF28F836B304EDA424EFD6AAF7F2F65
-:1081F00096D7FAF839A8669CA7ACBFCDFE99A730F0
-:10820000AEEF8178422BC5FD6F6BFCDB1BB296B3E2
-:10821000713EA13EC117C88F3050BC28BBD25ACF87
-:1082200017B69697F6D129219BCF7DF83D6A027F3C
-:10823000AF026A94F366BB798587C30F78AF2AAB28
-:108240007F8FB0E757402846798B412E07F7CCE265
-:108250007913F7F842E118FB2E291A9D8F58874DA4
-:108260004DEB58F38712E826BDDEACF4B8502E9BD8
-:108270003F54E8FD6E35FA20D2D5051AD9B91E460D
-:1082800034DCBF56D43A8BDD0B25E27E405BFEC268
-:10829000265FC0E2EF197AC129F422D317EB7C05DF
-:1082A000A8077B66F27DF5A48BEFEFF07AAE54BDA4
-:1082B0004D0847A67ADE54BD6DE9EA2DFFE1779FB0
-:1082C00089B1F9BEF4FBDFF4E366DA3B4ABC10F394
-:1082D0001F9A0EACF1A31CBFADC4FC88F73B7AFA21
-:1082E000BCF79F097D87F94E785E7E85E0D3BBFFA2
-:1082F000B8F126A4FBC5034E3A6FDF7CD09D7033E6
-:1083000026AE38721797A783EE3779791DFDFE48A0
-:10831000F351EB7C5BFAE4370B43B4B9172B16F738
-:10832000B393FDBC62FFEF67A23DD20C3DA427ECE6
-:10833000ED70FC0FF368FD5A80E7FEEDDF8D7CAB3E
-:108340006621F7CD4736525E55F391599447D56C67
-:108350009BE78DC20F39EAB3FE6E83410FD0B95D42
-:10836000BCFA3BDF1AF72683E7FCFE5FF8254BFCDF
-:1083700088EB89DEAE3B1E7F369459BFBF2FFCFAD7
-:10838000543B9DDFFF7D94DBF1708C3F9B9C093F4C
-:10839000FA4D4D7B9C61A641A0E9BBFB9EF836CA15
-:1083A000F7EB6E8A372CFBEEF3AF5EC7CACB9E723B
-:1083B000E6D7733454CC0336F88267DC315FD7E0FC
-:1083C000C3D21F3CEF0A8DE5EF1FC84BF163D953B1
-:1083D000275C30B63FFDA6759D70F1F3E736BE749D
-:1083E000BD3913EDEED5DFF9930BE7D73BC7251861
-:1083F0005ADABF7DE39EE7C9AE433A111F059FFAE3
-:10840000F8D68F5F899B9E9D40F502B88E0DC4AF54
-:108410006FA3CC14905C7FEF59DC2FF8953B8C74E4
-:1084200068FCDED7FD88CF5B4A0B97EFC7D614E216
-:108430003E7AA3335618A0277FDFB8FB1B24774B67
-:108440004E7FA390E7416945FCF78C62451407DC39
-:108450007533E1B918A2247F8D8FC99487FE470533
-:10846000EA9E4A333F6EF0733DF6D65E375D7EF787
-:10847000162A5CF4175F96757EDE96E7257EC3D8D4
-:10848000F7C0FB1B59F98F1ECEAF02BFC3B8D7CAC6
-:108490006391DBFDEBBA914FEF0ED78662BC92D1B0
-:1084A0002126E826A11E924FCF18CAF90421659211
-:1084B00068C7F4E4347C8FF5BB9D9A779CA59D58E2
-:1084C000D7F8F8F788F119DC59689FBD55C8EC9DBD
-:1084D00034F82DF31BF39FD91F263933CD733EEFAC
-:1084E000F7AFE7F3DC98F7FAEC3AFCFEAFAFF079C0
-:1084F00084ED709D67702586D2F7137325D20B6EBD
-:1085000048A49BDFFB9D627E5BBF33AF9CEC5B436B
-:108510004E18FC0AAE5B2979E1FBBC8C0F64BF2DC1
-:108520007E94B537DBE7382ED573A5DE9BD6FB25C9
-:10853000421F5CE7B7FD8ECBAE8241DDFBD3E4D4B6
-:108540009FF836CE5F365F71FD69FAAE93F244FE56
-:1085500070E8B957BFCAE4FC0F5DC6BCB5EA53FB6F
-:10856000BC6D3C3C11D2CDDB3FA861483B6FD9FBD1
-:10857000B4F3564D923CFF47E953837E0BFDD63C46
-:1085800027433F66A2A35D3FFEC517227ADAF52393
-:10859000FB7B0526F5974343FE0CB95BFA4FCBE90D
-:1085A0007742FAE4D390BF3EF934E4CF8EAF957EA4
-:1085B000F6EF9F4143C58817B3A7F32188F9309E92
-:1085C000FA1399E2A917184C6B199F2F1C2AA5734F
-:1085D000C46BBCDC3FBF10E8F1E755D13D3854EE29
-:1085E0002970AD457D61BCEFF1F2F8F785488FDF6A
-:1085F0009C07F2E631D98FFB5D491DEAD2F9234C85
-:1086000023131C49C8F49DC78B2FA0FD87E3658DFC
-:10861000D0916F336475C42AF4F3E3FCBCFCA2B6BA
-:10862000AFF8711FFEC2B1515B517FDDF9A20CE2C0
-:10863000F71315CC37B943F0FF6D886D9FC2F0BCBE
-:10864000E318F72B166D4A2F2F4B45FDC5EA3D2E3B
-:10865000D44BCC2F38638E872F15BF4BD6B8CBF6B3
-:10866000FED81749AE96DAE42A2AFCC6EF1A7275CC
-:108670002D5C2BFC3687399F6D865CB515ED920B12
-:10868000A7781CB2F7984CFCE83D24F1FC278C0736
-:108690004F4679E87199F3D8CEA3FCA5B9DFA0EFD6
-:1086A000FBD3BF99743FABD2F4CCAFC7ED64CFF32B
-:1086B000CFBC5EF1632CFFF09F47FC1AFAD79F7680
-:1086C000FCCFB49F7DE1B89BE0B870FC6723EEC798
-:1086D000F2B36EBAAFE6C2436E9EFF79DC47F7D6BF
-:1086E0005E18CEF38556FFE44FE3E8BE3EBCC99D5D
-:1086F000F1ED353FF7C77A8FFDDB6F317FB8F79823
-:108700003B8478341FCFA6FDADE667BD14A7B9F052
-:10871000933F4D32E7335D293E2BC47D88177CD0D3
-:108720008079CA1772F9BE41F38F27EFC37344CB28
-:108730008F9C70E17ECCB49FFEFB38D43B170E7348
-:108740007BE27D677237EEB3FECE7FFB3A27C677BA
-:1087500071BD1E06D09AA3DF88F7E1F4A70BA7C36B
-:10876000054607C48BD1A511F565267AFCEFBF5BE2
-:108770007A7C301FC76F3AF6599A3729BA481A7F60
-:10878000EFD3F16813C39FBF3FFEA771681FFDA120
-:10879000AB8DD6F981F02ECAF97F0D6F293118BC47
-:1087A0006BFE6EF1E6F27FDC1FE2797FB679D05F77
-:1087B000CE7F782F95BFE70B13BC839CFF0D7FB74F
-:1087C000F87F42BE1F667CF70FCCF7FF92C3F78598
-:1087D000FFFEF01E88EF2F0ABEFB02988770E1278C
-:1087E000FF4EF17503FF81F0DEFE7F29DE863DB48A
-:1087F000C1118E9795621E76A23BC4E05C53392767
-:108800008E612959E45DDBE17A2187FB17B2C4E36D
-:1088100036309CC78F40F81B7DBF03A9F2F3558A01
-:10882000BA96DF47A684E97EBD0D572F0C536E071D
-:1088300054BF16C572C914FA7D5BBBDFD52E8126E5
-:1088400031FB4FB9FA0BA7D0FE77563A12EE71F40E
-:108850007C139FEB44DCCB197059FC0DD5E62778CF
-:1088600043D6EF6ED19F07AAE3F8FBDD1E5509E85A
-:108870006C7CB5364EF8606E67DCB46F88BF8F9D38
-:1088800030F9637BF107024DF6E4E5D2EF4F39DCB6
-:10889000FF94A5EA6ECC8B85AB1CFC7E73E0E78A67
-:1088A00037948475BA8F59F897297AAEED463A2AEB
-:1088B000C0FC438E1FF99520FC494574A1543A34FD
-:1088C000AFB59EF09706E40FE7C78826C19F9516BF
-:1088D0007E18F44FC3170B3F0CFA5E2E5FECFCB012
-:1088E000D3FDE7393C3E67E793251FA480FB2509AC
-:1088F0006620FFECD03E8A8BBCF78F6FDE84F59745
-:10890000FD5806FCDDC4F70FF92081F357D15DE86F
-:10891000672D3D22535CF8FF002820961900800047
-:10892000000000001F8B080000000000000BED7D20
-:108930007B7C54D5B5F03E73CE4C6692C964F29AF6
-:10894000CCE4C524811834E0244040419D104010FF
-:10895000EE754011B451470810CC13A4BDB4D51F17
-:1089600003C1343C6C43E5A5453A202AAD5803A623
-:108970005E50D4411E62AB6DB4DC5BB46883A280F0
-:10898000F24869F5C3FB79CBB7D6DA7B67CE994C51
-:1089900040FBF577BF7FBEFC73B2CFD967EFB5D789
-:1089A0007BADBDCE9E4B97E0EF26C62E892B632D67
-:1089B0008C653256F77C3263198CDDBF2B213CA5C8
-:1089C00000AE2F7E3C940D61ECDCB29E4339703FCB
-:1089D000F44BC5F714760F750FBD0DEEDFAFB17B0D
-:1089E00003A5D171E435CD69626C046367F624CDCB
-:1089F0000CDB1953B6EFBB87C6ED98614E50A2FD54
-:108A00006C4E33CD0BFDFCF83CF40B253C48E93BA8
-:108A10001E634BF978BF50387CBBCD611BC2B77D5C
-:108A20008B250870346DFF8BC50F70543DFF9CA3E0
-:108A30001BE66BDAADB24809A3BF4B0C9FAB918428
-:108A4000A1743D8E57C6FC76A582B146FCD70BD7E4
-:108A5000CE8629CC01D78E557F511DF8BEF9A36E65
-:108A60006BF4FDBAE75F793104A8A97BE119871798
-:108A7000AE9F753DE560A534DE7D9614C634BB66B9
-:108A8000E88FE35E4CEB3B0ECCCB980BEEF35BAC8C
-:108A9000A963059FAFF35F4E32848FC138126E58C1
-:108AA000DF67F88F87B151CEE48C4FAF81FF47B2BB
-:108AB000919754B86E4F67ECBABE788AE22BC4E93E
-:108AC000F9DC179B43809F33BB3EDF8CF0D7FFFD63
-:108AD000AF9B7F08F863AFDA9C4FC1BA9B7EF91F4A
-:108AE0000EA4AF7C6F9A53A1F7CEE5B19007FA9D23
-:108AF0007B2F211C825BE75E3999EF85F59EDBF9C0
-:108B000095CB0BFD17BD323E0BD7BFE8D75559CCDF
-:108B1000DE3F1CE79630164ED0C315263A7A77C34F
-:108B2000A059D0DC2BAE31F4D8DFB93F1FE13C7B3C
-:108B300034C1978078827B8BCB913E40A7A1BCFD4E
-:108B400020E0B771C78FFEA20E8D87E7508EC98DCA
-:108B500074FD7802C2C9582487B911BF3DAD4E7B60
-:108B6000DFFEBDF43A02F4BCF61BD06DC70A3E6FBF
-:108B700007D0CDD1976E67F11FA04F13D22D294A90
-:108B8000B72F58F0E79E226877A6135DE3E12BF23A
-:108B90000DF055ABF0F16F70FA7FE044F9D995D440
-:108BA0004BAF2948AFE7BEC86740EF53E69E7BD87E
-:108BB00070C67A5E49706E85FBF7BFF24792937379
-:108BC000BF7EC78274843FBB02EB3AC77AFFBA709C
-:108BD0009D8D8A58E7B6E44882238AF7C6F0D48987
-:108BE0005E07DD3F4EF7C39C7F117F39489FF0BE83
-:108BF000DB9538F4E87016D23A583893D6DDB0EDEC
-:108C00004F16E41B4927A48F320AE9757C02DE97D0
-:108C10007492EB8E1DCF897818A9A3DB362E877D41
-:108C2000E9DA636145F1E805F0E27B082FB4CF6D26
-:108C300049D094147E3F17D671CECC6676201C6145
-:108C4000E58FF1E8CBD8325ACFB3B17229D6772568
-:108C5000B9BC12DCFF285E9E703A697C899F335F45
-:108C6000C7D7CF8750CE01FEDDF6E041E41FC6AC8A
-:108C7000E11330CEBD4C61294551BC4978CF688C99
-:108C8000F4EE995FAAE110ACBFB5633FE9D958F99A
-:108C90008675F93BE2CCF747315FE3EE7D43510F38
-:108CA0009D797D0FF15FE38EE396108C7368FB0B6B
-:108CB00096EED228BFA3FE0EEBF4F7995FED1B4AA8
-:108CC000FA16C78FA36F4E88F19BF61AC76FDAF1B9
-:108CD00017C3F875A10E8BD37EE5793ED3FC3370B4
-:108CE000BD9F759919EABFCF3AD489E138F3BE29FF
-:108CF000EC97C453EB3B16B263C3DF4D0C27009EC9
-:108D000016BD33F14F291978B57801B5AC7329E751
-:108D1000ABCE87FC394897CE77EE52D19EBC88788F
-:108D2000BC2A3A6EC591E6AA6490DB8A6381E1C8E9
-:108D300056B1FA60E45193016E98270BF5F372185F
-:108D4000C70BE330CDE70EC0B8AA63C244844775B1
-:108D50009A9CB6B876958F67B6075810E03283DDD7
-:108D6000F6EAF8C93DCD3194A5E0F23C26D40B0BD0
-:108D700081BD503FBB2DAC4403F89829D1F7148C2A
-:108D8000BB70B0BFEC20B417CE71FB42F0DC731B9C
-:108D90007FEFACD31E325D8BEDFC30CA51D24595CE
-:108DA0007941F59D51DE9ACB40252409BECAE94898
-:108DB000223B93A4793754433BA956F30146D92764
-:108DC000F6605E6A26BE67A1F73CA98AF629AEDB8B
-:108DD000C11C286F727CD94F8ECBB4C8505C3FB396
-:108DE000328D815DC9651C6E55ACA7887529C8DFB9
-:108DF0002D531D5BB1BD29B996EC7F3EEBD9E7073A
-:108E0000BA3DE9987018F518FC6BC27E79CD46FB27
-:108E10003E60B1B15D10D262E4D76B0A00FF15B5B8
-:108E200019EF6754552E18E063EC9ED4CE891AE8EA
-:108E3000EF8C19953B7300A79357BECBDBCF5496AD
-:108E400079A0FD1F6B1A2669A047327E5F59960FE5
-:108E5000ED0B69DF9F44CFEB0049D783EA5F3374A2
-:108E600052A8342AB79900668A4AF27C23E2E16C60
-:108E7000E04C2B3E6D98FEA5051EE15F00F190379A
-:108E80008AE321D77E6C2783FE034CDD4B912F7F35
-:108E9000FECAFF4AC57E5EE6A4F53AD972E7A75638
-:108EA0005C3C1B7569D8E5F499C63E957CA846E5FF
-:108EB00020C515BC3515F8AA7556C98609A86BEBEF
-:108EC0007DC45F30B393ECA1ECEFCC20FAD408FA68
-:108ED000209C56E0B339BC0BAB65ED420F8D73E2BD
-:108EE0003C4AA85EBD74CDB7876796E49B64968CB8
-:108EF000F7B57A2FC1D595E99F83F8FA2A334857F9
-:108F000079DF3D6BA63708F8BD3135300FD7E199D1
-:108F10007B311FE19F92CA68BCAA79763FDAD50BF4
-:108F20007B41FDC5912B79DDBA84F9B441FD3F9FAA
-:108F30009616FC2E8E5FF89A77D76118EFDA1A8BA7
-:108F4000CF06535CBB78B84F4B677C41E87708BAD3
-:108F5000B991962877DF636194BBF3098ADF0FED3F
-:108F6000F30F38492FE7D64C398CF6EC7C52414749
-:108F700004EFFFD04BF2081E8082F290B7372562D3
-:108F800073103F7F19C3CF5F1AF9D738EFF94BDE63
-:108F9000DDDD349E538C070E113CCF13743AAF7253
-:108FA000BFFCFC122FC101EEE33EB4B7DF74BEB5C7
-:108FB000A9C24F12F479C8E65F87F400FC6FD0E3D2
-:108FC000FF67FDD37133F6033AD235968E73ADCD7C
-:108FD000F9A817EE0F744C008DCD4ECEFD5E053214
-:108FE000F7D4D4E036EC5F3FB3EB9099A0692E46FE
-:108FF000B9ED4B6785F4B96BEF7D4BCDD06E423A3E
-:1090000079FBD2F3DAC56544371D7D3B70FC6BF705
-:10901000FEC584F04BBA6E50B81D887DFFE55445FF
-:10902000CC5BBFD40CF8BCB0DB42FE6F6CBF83A935
-:109030005EEA27DB43AD153E0DE434CBC482F1C6B6
-:109040003DD8675CAB2F210EFCBDE339F97880FF7A
-:1090500037F4F8FF6DFFF8FF9DC0FFEFBE25FE8FD0
-:10906000209DFBC3BFF4BBEB847EA863ABC9DFFCD0
-:10907000C43FCD3510E69FA0DA491EE63FA5921CFD
-:1090800042FF291E57549FCCBFAE791FAE77FE1307
-:109090000AF16D4D90EBF9CFE74E3984FA7D4EBB66
-:1090A000D17F9A3B33644138E76D34DE9F1F8E8950
-:1090B00007994EAF035F9C89F2EF00AE77DC642F17
-:1090C00055211F55F34A53D05F7AD5ECFD3DF9E3A6
-:1090D0006FAA6C6B1CFCE7A715903D96EDBC664033
-:1090E00092CECEB31A9B09F5A51C77DCBCD22CF42A
-:1090F0006B16267B2F1B870D586CB4EB05A144E63D
-:10910000D58D5BD49666680F6ACF36F4BF6A63A1CB
-:10911000E1F9E0F0D586E7D76C2F37B487745C6F40
-:10912000E87FEDEEB1867659E41643FF6187A71913
-:10913000DA23BAEE32F41F797496E1F975DDF71B84
-:109140009E8F3EB5D0D0BEA1E707463FC6C4484F6C
-:10915000B24485F4E68125A72A4E20C30D57C621C7
-:109160003EAB46F1BE0716584C4E075E8B4D4EE0A7
-:109170008FD7E74C213FE0C00297DF4BD70A3FC6AD
-:109180003F4C1D333C18C7CF1DEF3C5D7142376F1C
-:1091900095D56CD073E39DC6F6B034113F0CE07CDE
-:1091A000332ACD285F6AF39488059AD9F30766E1DC
-:1091B0007C2067A3D3B89CD1F58A72E668AEC0362E
-:1091C000C859655A1C3963C2DE560A7E82ABDF522B
-:1091D0008E8C954C76D98F37BD743FA441BC32D666
-:1091E000EACB3D88EB32F9329009C7CD0C1CE0E3A5
-:1091F00009FBCC4A4CDFC63E4B39779BBC21B26B96
-:10920000698CF24B8FCD294E613AFCDE956612FADD
-:10921000A09DC791CEEDC33489C742FDFD8923B41B
-:1092200092E87D65DE942C943B773F7AD1E22E1A4A
-:10923000BC0DF4B1C553405779BF75A66962380EAD
-:109240007D1BD2789C21FDAEC151BFAB01F17BD615
-:10925000FDEEFA4180AFC6EA1EF2BBDCA6F605873A
-:10926000705DBF5179DE0C3C2BD40B73841F3D67BE
-:10927000D24F171C02FD34E7ED41A49FE43C9B96BE
-:109280004406EBFD86DC7EE2AAED029ECD4BFC831C
-:109290006B06115CA41FA49F9E1F6A9880F1CE00EC
-:1092A000D64C71E37A13AB8D37CE0A314E16921C31
-:1092B000E175DA494ECECE3DE6D0601D89C9C115B3
-:1092C000C86FB3AEEDAAE0FE98DF370DF8273F7206
-:1092D000F77AEC9FEFD65858E93B7F5675B0AD0052
-:1092E000D6B73CCDE4B353BB47C1FE090F32960E4F
-:1092F000FD97FF5D257896BF7E1DC3782DC1DECC1E
-:10930000D0AF95EBDA9FF638E147ED4C223BC8D061
-:109310002505FC7D57D0FE0B774D17FA1D5FAC3548
-:10932000D37C5FC01A9D30FE179D6A189DF7436974
-:10933000891113B4D5B664B2DFF9E88342FFB99D51
-:10934000C9616F41142FDAC6312C02F62E2197AF76
-:109350007F799A3D6C2FA075AFC1754B38E5BAF394
-:10936000FA89432369DCCE327F8981CE1E88C9BA4F
-:10937000706E0D9C7F18475D6BA638714EAA9DE0FC
-:109380000C2F090DAE31F75D5FAB7BDAAD77023C98
-:109390002D4754A6C238DEEE76C2C75CC047D8DB84
-:1093A00017DF67BD055F9A54823B82FCA86E9C4024
-:1093B000EB62E8D7C37B0D3F57D8E305C897C18957
-:1093C00044E76C137BAAA0EF3ADE48E3F9DBC369FC
-:1093D0004EBA5ADCC55C4EDC03076F83F1DE423DBA
-:1093E0006565F1FC80DFA7717F9AAEB1FA09EC6088
-:1093F00008E1B8B051217A9E54C21633A0ACEEF603
-:1094000066F207A47E52FD2AF91F524F49B8408FD9
-:10941000BD9FA6B38F6ACA834371DCFEFDB59DFB79
-:109420002CE8AF3919F96B528FF6E7AFA19F86FC94
-:1094300027FDB45331EB84F57D2ED6F779BCF5F5D5
-:10944000D1BF77354B3FE72F6997F133332DF1F5D6
-:10945000D355E99C0E4D4E0BA3FC14C6CBE83FCC74
-:109460003785B7621E4A0BDBA6EAF0939D2EFD3CC2
-:10947000EE6FF4A7F7AE149714AE2A25FD7BA1CBAF
-:109480009B9206D78C8F95E678E3A88B9F1D8674F8
-:109490009A6FAB4C4A07389DE9467C3DB6A28FFDDA
-:1094A0004A4FE7F8A36B1FFCD9017F26839FF86220
-:1094B000B197F0E749BF8C9F78F6B60F2BD02E9D61
-:1094C00013786AEC8D7BB99ECE06638579AD06E68E
-:1094D0007FF244096F5F5268D783F2759BED81413B
-:1094E000387ED3EE494FEAEDF7D7693C9FC6EC6969
-:1094F000946F95E3B984DE8738FBC64FBCA4FFBFE9
-:1095000044FA46E3EDEE0A8CB75A7E7D550AFA67B7
-:10951000E35EBCD389D70B190309AF675F4CF02317
-:109520009C67D3401FDBB13DF210E6213E5F7238ED
-:109530004D4F97B3BF7AA7C20CE39CDDF54E8586ED
-:10954000F90C91AFE9B54797FE501180F743635985
-:1095500049B35DC727566E2FD6DA78BE23D3656927
-:1095600065D7423C92994AEFAF73997E8CF755EBE1
-:109570001FF24FA09CC5E477D69ABD2D76E03388C4
-:10958000E57CB84FB070B0DF3307F33B53DD949701
-:109590006951B81E0DCDE1716846212B2980F1CCAF
-:1095A0002655C5F77A3CCCB715BA241C688FA0DACB
-:1095B0004BECEAF023F8C313D3089FA3CF38158CE4
-:1095C00027643E48ABE2E3F54CB784B7EAF240EEDD
-:1095D000991AD9C524AD83A19EBE2F338DE097F98A
-:1095E000A0AA6933039508D7C3268A6740F12AA841
-:1095F0000F73C43A0A3CBB5648DF4673215B324CBA
-:10960000FEB055C0FF0301CF0EAFC98FF957476EAB
-:10961000E4A819FCBB9CE58C7DA4F323932C42DECB
-:10962000DE5649DE92BFBEC93A13FCA3A4449E573E
-:1096300075045A17605E1CEF7FA71CE9C2DF27FA8A
-:10964000A898A662A11400397994715C49BFCE250F
-:1096500056DF4060E85D4B9C747D7A899BE0FAE9B7
-:10966000122F5D7FB2A484EEF727A757BA3EB2044B
-:10967000E6D5F153C648C00AAC37436524CF8F8C7A
-:10968000A8489915C71F90D7C7971C768D1B241023
-:1096900008F4C8AE776E59594074462182D5BDBDD5
-:1096A000C23F86B187CDFE050C586B4DFAD7E3302B
-:1096B0006FB54A31519EEAA7E96FAC08E5E2D54B98
-:1096C000744FDAFF1EC37CA76778BB82F2EEA96FE6
-:1096D000273E18DED5C582E2BE1FDA9E23FCFEC3FC
-:1096E000368EE7D58C4D4478ED0A0BE0F59C8DFB6A
-:1096F000839FDAB87E3C2DAE43D2839B518EFFE62A
-:109700003C5AFC3080672B7D3F1FF73B92F67F452C
-:10971000F96075A8C58AF2E1D97B9CF6415453B72C
-:109720008581497EEDD13F537E4DB5040A78FBD744
-:109730002BB19DE9086C41978D85FE3CE9801BE4C7
-:1097400006F9E17AC24608E578954DB443C7080F9B
-:10975000ABCCBCFDDAA37FA275AF3207E6235EB0C7
-:10976000BD1CC65B95DAE13641DBBEF4BD15876FE3
-:10977000C0B6ECFFDE8A10BCFF52BAD437010FEA44
-:109780008FDEB613DA43746D8DB799955FE5FA1ADB
-:10979000F67F752807F8B571AFD281A079F6AE5182
-:1097A000709D9EDD6B08DFF407F281CBA03CA935EC
-:1097B00064C1F79F5E72D8B91CE8ACA5B5B910EFCB
-:1097C00057B9837E7FBCFC44A6F47FA1BF3ECF1671
-:1097D00036F774EBFC710FE372C396837E88E35F08
-:1097E0000CCDAC3C9D01E3AC55822B55D433CF99C5
-:1097F0009DA8475817D74367C4582C9C4DFE4DBDB4
-:109800008D37CDCB822B07A39EB85BF361FC5C57F1
-:10981000D05E89F6BD6E4F816F298BF24B5D6A87F2
-:10982000AB1CF927D5D86E117997ACD4E6D4D452B5
-:10983000DC8F58938FFB058DACFD9E1F20BC6FA95C
-:109840000CFDF4D3FBAE4B190DED0668A3DFD0D0B1
-:10985000F98E05F9F3D10CAE3F1B3B817F609CD59F
-:10986000205F7E7064B668CE44D44F4FFB9BAF46FA
-:1098700017EFEB47FF6B920DE8FB4CA1DF89F47605
-:109880006798575AC1697CC6E21CCCCAB06D27FEE6
-:10989000AA2B33713962F6DFF835B1FF09EDE38F9A
-:1098A0004EBA459FDFF5E0BE0CE0B969933D644ACE
-:1098B000217BF3BFD1DE366E3485507F99AC5D16C7
-:1098C000A4AF1BF776893E4EC2DB22A9CF63F4F525
-:1098D000A24969B7607BD1C385CED065F297B51731
-:1098E000935858E71F3D9AC1E5B8560BD13E4AED53
-:1098F00045073DFFE7CD6763E161979BCF4ECFE51D
-:109900007CF5D1F988AEFBCB7FB37E20D06DD14EF4
-:10991000B32941C7778B768AFD6A9B3F0BC7C9B4D1
-:10992000308177F0F701BF5A416F3BA4819C3FD251
-:109930002BE703568E1B83748B3E67A30C7AC08F74
-:10994000F1E62389520F5C15BF7F624CFF42D9F6C6
-:10995000AD1C97DB179ECCC468DB0AFDB5FF4EE853
-:109960006D237C6B4C31E3A5C9F947D17892AF8E5A
-:10997000A757FE2634109EA7B65762FD46CF1CE6B9
-:1099800045BB8CFCEAD3E9FDE3E95CAE6B2F16190D
-:10999000E81DC57BB1E1FEC9256EC3BEDFBCEA454B
-:1099A000B43F791CF53C8EC3421457D56ECA616131
-:1099B0009D3FF5FFE1F847E118DD0F1C37FE0FC3AF
-:1099C000516090CF281C030DF7FF5138B6DE517C53
-:1099D0004B017459A784AC8568171E3251DE444D83
-:1099E0001DE75D8AFB0F0F69E4E7A14B82F51F8538
-:1099F0001A3BAC95A3FCB4FB31CE67CB78FE08EEE6
-:109A0000B799CBC90E911F5CB437E13EF4D30A6B12
-:109A1000FDF3F1CA724B697F43EE0B32910793FB62
-:109A200019839CAC5203E76D74E67D64A70A03D5E5
-:109A300075E8CCA9C9C313D13EAE338543385FE87E
-:109A4000A77CBE4C53B8C38ABAD731D089F62ED37F
-:109A5000C1F51F5B594AF66FABA9F0EA0500C7C311
-:109A60004A65E29B88E7D442CAFFE2FD85707FAB7E
-:109A7000B05B6AAACF89766AABB05B2D42BFCBFBE5
-:109A8000496981FBD09F3895B1E816EB75A887FC32
-:109A90006DE9606F4E662C5AE9F6A0BDF1165AC109
-:109AA000BE9C5CFB00D99BAD4BBDD9CED4687BD0AE
-:109AB0007F83B5263DF1C04AF45796DB17DE8FFE53
-:109AC0000E3CFF8D15F4EC336942EF88E785BD7AD3
-:109AD0000AF412E83175696F3B847AA9B057EF3CFC
-:109AE000407A67DB6695DA6FC37CE8FFC03A422AAA
-:109AF000AE7790467EBD0D604984B66D7021ED1342
-:109B0000C1BA5922FAD783F97399CFB70C32513EB3
-:109B10001FFB231E6D1EDEDF3295F9705FCB926C4A
-:109B2000A73844EE0FA8629F2A51D46928CEA91401
-:109B3000DF5957972FC478CC3AD0B80F6B89A9E773
-:109B40005063EB3BEC11F2BF4E6788BC7E3A735F0B
-:109B50002A8ADE07BD5D8E57D79DCB2B11DE85C9C6
-:109B6000CCA9625E2518A17DCE58BB66053BEAD51F
-:109B7000C987D5CEFCF1EA090E65723FD67E51A3A6
-:109B8000F866AD02FE0DDAD164CE67D23F323B25D6
-:109B9000DF1AEDAEF497CCA97C2D8B268DCDC2F8C3
-:109BA0005DB5FBADE8E7EC7396535E4065BE5B2B9D
-:109BB00075FECEF2C824CABF694E3FF9E145224E78
-:109BC000549D3EA6F7735A9740607915634F56141B
-:109BD0008F457978DC16B116217DD79928DEDB5FB9
-:109BE0007E7F48C1FCDB624672FA64856B2CE6D14D
-:109BF000B7688194BB515E8EC07C5E4E37BE9FDBE2
-:109C0000A260BEF80B6B2005F5C123C8F73ABC3C37
-:109C10002FF0F1F70CAE7F1E3673B968057822007D
-:109C20008776F11ACA6FADC9E4790F4BF538CAFFD0
-:109C300058001F98DF4B60CD2127AD97E7EB12DC72
-:109C400026435DA0767128BDFFF70C9321AE6E838D
-:109C5000757A75FACBC64294AF431C3F15C77F791E
-:109C60003B93C72356F087BCE49FC4EC73F7F58F92
-:109C7000C85F91F4E9F55314F04F2E138F3541BCB2
-:109C8000ACD7F74D5A0FE9DF268887F1FE39A79543
-:109C9000FC4359F76017FAACD51D6C1F8D7C9EE80C
-:109CA000188A79008D7510525663DD03EA43B7D6E2
-:109CB000D3CBFF20F32D36C756ECB75CD44124F943
-:109CC0008CF293C8DA237E94CF129DDC30C477885F
-:109CD000C64DF01AEF331664186768EED83A89500B
-:109CE0006F3D14D5F369EC31DCBF967E6F8EA847CB
-:109CF0003A9BF421E5D1C0EFAD4CA77D801E8A5B75
-:109D000064BEE7DBFAC9453806E61116FFB5E20482
-:109D1000CAD9D40905783F49E37C02AEB896508E83
-:109D2000E1D584F9A9B0FE3B85FDCB50DBA96EE4FB
-:109D30003511CFFECD39D3437114E093EA6D127D16
-:109D4000DD142F0A3F4DEDD58F7F5EE137FA9D215F
-:109D5000BD9FB76ADD9F572CE7F10AB55F7B3442A0
-:109D6000FAF3619B6CBF4C6DB073118C97D88B0963
-:109D70005EE44378DF8FF2C6EE28263F5B2D64D980
-:109D8000888F710E2BE94DF5C584ADE807435CFC67
-:109D900052BA6EBFF86CF2D17CF487E38C17328C28
-:109DA00097FFEDC683F93BB11E473E1FE7D8185118
-:109DB000F97B5E7C8FE5767D1882F1D7FD3A81AD27
-:109DC00004143E6E36CABBBC6E15F28CFA465F0FA9
-:109DD00069A9AEF123534BB94E7027B2888E9FA468
-:109DE0009C6B1707B3884E4E8A32F9BEAAA6F92992
-:109DF0008FA45D2CA5E77F4799A6799C579827AD3E
-:109E00009F798691FEE87F9E0AA15F98D8BFD2A86D
-:109E1000AE46EA85FEE43C769F2C562FCAABD48B27
-:109E200059997CFC7D99C6FCEBFD1B3B0E210B7DFB
-:109E3000660F1EC8A4FAA8630E34E1F5A6C850E464
-:109E4000E34FFADE6FC4C5BD95CEF3FEC5DB17BC8C
-:109E50008EECDA9519FC02FDA0DF648AFD4937D843
-:109E60004315ED1DD88B52CAE77E9181F9DCA077AE
-:109E7000C37886F27407E573535C81521CBF755A30
-:109E800005E51C24DCAB96F03A35A967ED5A90F055
-:109E900065D542FCEA0C820D67EC42A679B2A62099
-:109EA0003EB91C1D5D7781E4C0A6F989AF6C4E9365
-:109EB00017FD021BC485A877973A4D7CFFC66DA598
-:109EC000FC7FAB021122E88D85A98597DD1FB75C69
-:109ED0007491BD0548DC7ABDFDCF9F2743D807E3C9
-:109EE0003C9A93FB0D6C3FB7C388848F75FA58FA80
-:109EF00003B1EFC58E2FF129F16B45BC96923D8CD5
-:109F0000EB6FD85CC6FDCC2CA96F338F1647E06E83
-:109F100083D2ED40BF06F4A8CD857A7A488FC3E49A
-:109F200025FDEBE27E5048F035B3EBF95AE6A9E5A2
-:109F3000BA24FC0BDF9C63D5EFBFC4C21B6B67ED7B
-:109F4000A5C6BA059BD758B720BF0B50B500F18DF9
-:109F5000798CDF8A72B2D459EE443F67B9E6FDA32B
-:109F60009FEA2DCCE46F83FF6E985F5E1F01F94777
-:109F700038CA5C26435D8DBC26E33E4A9CF7A6BAF0
-:109F8000B89E7A64DF9DA487351FDF678AA51F63AB
-:109F9000EDC42FC9C5CC49F95301AFE30AE3F6C7B5
-:109FA000473FDE67233F591B650D635D67EC7CAA65
-:109FB00039E05750EF9631F293D53C3EBF3A885185
-:109FC0001DB863781A2BD1E1B1D53D8D9E2FCC748D
-:109FD00032A4B79A6C0AC4E31789A7812E93816FC4
-:109FE000DC926F3CEF17A31CE8F826108F6F06BABF
-:109FF000B8BE4238F4F46D751766C5A34F542F727E
-:10A00000BEBA125FCC4AE27E4EA785EBCD06C411E4
-:10A01000C44BF5999656CC7F9FB1F2E7CC5FC2FD59
-:10A02000322BE7B95949F961F4873A357F12FA655D
-:10A03000B37AF76DFDF4BD47BDCD9F721DDAC777CA
-:10A04000B8DF7CB2D2DEA6C03827CDFE14C4F7C973
-:10A0500077546529ED83F3FA39598774D2EC5D752D
-:10A06000353C9FFD33D5BF941E1BFDC133CC3FEC67
-:10A070006DF48F77ABB4DF52F0D3FBD421D0BF06A1
-:10A080001C45E4A75955F610DAE1CEF79B3F447D15
-:10A09000347B73827719D6B16C1CF625B63F5D9D73
-:10A0A000EC4DA03C5BA1E2C1FCD79A0227ED9B2CB2
-:10A0B00066229EBB7D7215E8D05FE2D4327F0D6BC5
-:10A0C000FE94C9E7A155E3609D5767769AEC00932B
-:10A0D000B221B4CA0AF47B7869C08DF163876BC67C
-:10A0E0002A8C1F5D2E7FD74D102F9E70DD3919DB16
-:10A0F0009D8FCBF1EE5AE507BDFCB22958A0C0F305
-:10A10000A4AC072653FD6A911CBF959ECFFAF95562
-:10A110005F1E85F1CB366C9C8C39B78A6AF17EE87C
-:10A1200009826FCE18D9DE9A543510DE4F62863C14
-:10A130009A391A8F529EAEB3D7BF7A7A32C69FB37E
-:10A14000C736576930FEB20D3B569582888C6CAF8E
-:10A1500074FAA1FDA30DAF4F4E027EEB64FE3A8C64
-:10A1600077576D3830D97A038C9F6E1C3F4315F9B1
-:10A17000D8D0E15598C7EB858FBDB7CA3F30DA7F9D
-:10A18000983B61752837CAFFFF2AF81FF8FD572E44
-:10A19000DC07B4761FC2145DFEE21E0BAF7B15F523
-:10A1A00029B9DD4379DD8D689774F33A65D976F383
-:10A1B00076E7B2F8F6FE2F6E2E779D89F19F7F2805
-:10A1C000F439C0EDC7FA9594A3CCBF238E3C1D741F
-:10A1D000D949FE0E82BF674D8BCAD5AD20DBA3B037
-:10A1E000FEC7CAE194E3C4BE7F4CE82716BA350D1A
-:10A1F000F9788AE0F3229FC2EB7876278507A1BF22
-:10A20000C722DA6DB09EED229FB1DDC6EE9D0A53E6
-:10A21000BB12597027FA9FE9D02EA5F7FD3BEDD16F
-:10A22000F1DEE2A2CCC61705B6E178E3B33C652DBA
-:10A2300005D17100EEE5D67203DCDAA8347C1ECAC3
-:10A240005E50AAC367295F07F009E10BA679F626DD
-:10A250009097CEAEAB0B57C21256B9BC86B8AFA220
-:10A260006B1A7D97F29F6EEEFF302F7F3FB38AD738
-:10A2700085F4EC49A23C05B37615239DE47B1705D4
-:10A280003EAA7E346503F6ABEF3233AAFFDF59797D
-:10A29000597FA01EF37A3AFFB15E8B503C578F79FD
-:10A2A000BD6138DE5B16B463388E57E4AF312F974B
-:10A2B000D9129FFED21ED65F4C65A1617DF56674F2
-:10A2C000FC0C7A7EA57545C733C69D7DC7B3887DD6
-:10A2D0000081774DE0DD121FCE0159824F01DF264C
-:10A2E0001D7FCD11FC06DA93FC80732F0EDEBAB20F
-:10A2F000403F2FFFEE06F4F3B337A1BEEC4AA4B8FB
-:10A30000A542F34FC6FE155D69B4BF20F943F2853F
-:10A31000A46B675A33E56B7A1E53C80EC6C2552C20
-:10A32000E1DAA8101C59D541F53E1D7C521E60FC97
-:10A330004E31FEF051243F4F707900B9B91BE5173B
-:10A34000F72B711DBEEEA1D386F485FF2768FF466B
-:10A35000101D39FE7F6D13F51C1C6F7DF19F730579
-:10A360007AE6D3F38AAED7699DF5FDC8ED5B6E073B
-:10A37000C1997534E2F042BF4705FF77767CEC184F
-:10A380008D72B15B658A97AF1BF55685D4C76CEEAD
-:10A390005B6341FF65F5B6415F7A910EBDFA3362AA
-:10A3A000B546FBBFE29E3B65393CCB48E0F29AA143
-:10A3B00082B5298FC2313D8BFB59A382F1FDD27743
-:10A3C000DDC9F45CE2FBB1C555EC6358DFCF5C7CC2
-:10A3D000FF7354774841BA48B98ED5538BB2B83C15
-:10A3E0002EC8FA7FA4A76C57D05336A9A7F8FD83CF
-:10A3F000101C613F97AB7BA802FE738DC9EFC2387A
-:10A40000ECC43B3FA0EF38E689BA952158B7827675
-:10A41000F36880ECCA697CC8EB571EC218704EBB4B
-:10A42000B17E856DE3DF89C6F255948F42C27F17F6
-:10A4300070087B706B42F7AF7891B1519E651BE05D
-:10A440006C3415E99EDBB9DD9274007A2F6769518F
-:10A4500039FEE8C5AC2DA86F87B9795E31A3C85F16
-:10A4600086EB9772097655F089E9DE6976AE37A6F4
-:10A47000C5E1DF27847CCED9C8F9A6F3BFAA26237D
-:10A48000DE3BDF4D4B5DA6D3134F093B28C7957AC2
-:10A4900048BE279F3F29F8637B9683DA4FB99245E0
-:10A4A0009EC714F7BBB9A774F695F8A78DF30FAC48
-:10A4B00037A4E7EF616EC5605F7BEDAAC0738305CB
-:10A4C000F00BF8DB6E0E6563DD4E459789C6ABD9A0
-:10A4D0009D4CF580351D1C8F35EDFB4C753AFCC449
-:10A4E0008EF71F59DC1FD862E27544074DC06F8894
-:10A4F000773B87EFDC8B1ED29F8745BF2BDB8D6FB1
-:10A50000A667B658781D29D097EAF91A5ECAD962AB
-:10A51000D4D34B05FE832DF81D5BC606E6C35A2B2C
-:10A52000C0534401B867B885DEB1F82DF8DD6ACFB5
-:10A53000638CF6F30755FBCBBCD06E0AD8CB15184D
-:10A54000AFB89DEBE18AB5E0C7A0DC59A55D787393
-:10A55000877EBE6359C9221EE1FC5CB391E36F1094
-:10A56000F83FCFE215C6F915F9F11C9E8FD6778C0E
-:10A57000C6FC937CFFB4A0FF95E0AB40F88647E1B2
-:10A58000C3F1919F983DB00CC76DFCC3AE1CFDB8E4
-:10A590005F66717D9BA1CE1A6B433DBF06EC0E49F1
-:10A5A00067703F7E9750B337D5B992913C9B30EEA0
-:10A5B00091F3D6883C24C85DC554585A71EF3C923B
-:10A5C000AEEF3DA75FBFE6E6FEDC3F8BBE9D96206B
-:10A5D000ADA76727C0EB8DE2A5B3E3BE6536B41324
-:10A5E00047990FED8484775075B703EB4E9A84FD3D
-:10A5F00080F59A307EC9F89997B520DEBAC65A30F0
-:10A600007E8AE56B49A712C6E547C66925B84100B1
-:10A61000ED3CF750A17F18C5BB1FBDF4CAB32B2971
-:10A62000BEE27469AAE674AC740767B833A3720813
-:10A63000FABC02F555CDDA5E7DD4C1EF77E557035C
-:10A640003EAF754B3937D22523D061C37D0DC9D7B5
-:10A6500067F70C09AFE474A6F93B3B92C38A82DF2B
-:10A66000A1362FC5B85BEA0984475F8729E1E9A5D0
-:10A6700023033A0E89DE1F54CDC76B0279473EAAE9
-:10A68000579B158F427A80F2AC59A807A09DD5C17F
-:10A69000FBB1BDFC5C0489A7FA193028C49D7E7704
-:10A6A00029AD43E22BAB3A62AA875B13AD55FE138B
-:10A6B0003A7FEDB0D86F40BC4CA37883EBEB7A3592
-:10A6C000908B712BCB4AA0EF38C10E917E39686315
-:10A6D0009A0DC67B03AE6897C6AB0BE83B9AF14573
-:10A6E0000AC931680099F789A03F7DEB4D4924FFE5
-:10A6F000ECEB0706E23A3393381FC23856318E9599
-:10A70000ECA0B007BFCF07BF4E89EAE5838A42E3DA
-:10A710001CBCE19AAD545B28F812C743FFE9A03294
-:10A720003597EC6567A6282EE2F0F76FCFBAF3F104
-:10A73000B93E5EC4F82E1A6F96ADBE19786AE4C4AD
-:10A740008E88C989D2317CCABF01FCE321DEB4C145
-:10A75000FAEF137C7DB020A43A10AE41B06EB8750C
-:10A76000283158DA6C8FCEE312F91B97A8DF457FAA
-:10A7700001AF260FD7FF3FF6707BF181B8BA1CF10D
-:10A78000F33D1745FF3FDBB99E5E5919FFBBED87CF
-:10A79000845D9171E7AD62BF03E2CE87DC3CEE14CD
-:10A7A000F5A77C7F04FC7BC26FD58FAA69DFEF8B96
-:10A7B000AEE929FC3C04AE0FE688FACF7B1F9AFE77
-:10A7C00013E4B31358670E78F844F0CB09A7DF8180
-:10A7D00075520D89F1EB889F14F034083C9C5CC2E3
-:10A7E000CF2F9883FB72C07FEBDCDCCF9BD77EDB67
-:10A7F00004A4FBBCB50AEDCBC9FD7F49E7DA4DAA3D
-:10A8000021BF3E07F7E5D2FF9178AAAC9F786AB8DE
-:10A81000219E92F3C6C6551F2D711BF60166B51712
-:10A8200089F32378FFD9CC4770CF6ECB31EC23B2BC
-:10A83000B6CC6FF4DD3FC651A1B8F0590CF73F5AC2
-:10A840006265213D1CA70652FDC443EEE0CB6E03BA
-:10A850001C492C64C8878E71D2F744369E87057FC9
-:10A860009CC73170DD62277F7D22FAB3BDF930D0FD
-:10A8700023CE14D44B95FBDD23A2F18394B3FA319C
-:10A88000F1E38875C20F5AE7E27172CA511957276E
-:10A890007A513F4ABF3CF6BD777BF9D7E8575E292E
-:10A8A0000F017C1CD2C749B1E39E72FFA3F177511F
-:10A8B0003FFC52FC3F127F578C09529E8FB52B54A0
-:10A8C000D332729C311EFA1AEDFA08BC2619E2A1A5
-:10A8D0009A6A633FE6E1F69F79920C7E7C7FF8D41A
-:10A8E000FBF14A11EA413E5EA3E08B82CFDEA57AFE
-:10A8F000D2311EEE178DC8F62778E0BA5AD493AF3E
-:10A90000B6F1EFF9B7FCF77EF76CF48FDE36D3FEC5
-:10A910003FDBCDF9A6F289452D783E80BD4371EA33
-:10A92000BF5FFD97C58ABF06E43A5DE8BB7A1F5F4B
-:10A930004FBD2F621968C7FA620E476EC73E45D3F6
-:10A94000F15D6E2DEF97E7311BF2E205A23DC0E30A
-:10A950009471CCBE4919D8DFAFA15F90DDA190FD05
-:10A96000CC6E66E457670F5768FC7F19BE45995D4A
-:10A970001A5D6F9B696AA913DE6B7325F9D0FE2CF3
-:10A98000C90E5EE541F88E4522682E471EEBD23097
-:10A99000DE5A93ED2F413CC8757A556736FAF14976
-:10A9A000C7387CEDBD79266E7F185B25FCD2ADDC07
-:10A9B0003F53D961C6FD73B2F3AE65256407E57AEE
-:10A9C0005C69C28EB85870979DFAB791DF62E57ED8
-:10A9D000806B5931F9F392AED1B8737039C69D4589
-:10A9E000AB23DA2C78EFA54DA6B8E7554C10788745
-:10A9F0007554EAD77125BD25FB99FBC93B4ABE4F6B
-:10AA00009A183F9E074B48CF2B9FC8B88BE473B969
-:10AA10008561BE5AE27F4D76E0768427BB638B82E8
-:10AA2000B8F948D4297C94C8F3F11FAD7C5641FF96
-:10AA3000F281F9CCA9B2FEE1AE5FACFA6BF4F2BCE4
-:10AA4000DC427491F14A141E9E8769F070FB7428F1
-:10AA50003B5083F46EDCBD86E2EAF9DB8E5B2EBBF5
-:10AA60000FF10DF1A6D4727FBD7EA695EA992A9FBB
-:10AA7000D088EE75CB2DB46F58BF63277D9FC61E5F
-:10AA8000643E94FFFA8E9D4A0DCC5BB763A73247B4
-:10AA900087C79CFA30D56F5F952CF72322E44FC708
-:10AAA000F237E611D07F3964E3F27FA6D21EC2FDF1
-:10AAB0008933E6603DF63BE349F2E13EA6C4FB1B69
-:10AAC0003B6FA6F30292772544F0DA66DAEAB642E3
-:10AAD000BFB6AB2D3EE4A735D9C1154897342DD06C
-:10AAE00089EFA76624FB707FC39BC0CAC97E7F43E2
-:10AAF0003C8C8CE18B910F72797959E817F8A37A25
-:10AB0000AA273DDC2FC7ED25D45787CC7C1DBB1869
-:10AB100087D7E4F16F443AB1C369346F767D44C19D
-:10AB2000FA8BD879A37CE5DFECC9FC3670765850F7
-:10AB3000CFD7097D53F9C436E5631DDCCF79548244
-:10AB40002F7BC71605F367F09CF40DF46758EF945C
-:10AB5000BD83C7AB75F07C8E4EBFC875C4D1339D25
-:10AB6000089FFD58D701AE67227CBF40C01B4BCF6A
-:10AB700088C74BF34F007781EE5B4225182F1F2AC1
-:10AB80004CA4F1A4DCC7CA69C4C3FDCAEC4DDB14F4
-:10AB9000939DF655C8BF94F0C97E23B2C71EF0102E
-:10ABA0001EBA080F0D9B345ACF784B60E0029D3CD3
-:10ABB000BC2BC67B7DC68774AECEDA7F7F87F8B1AB
-:10ABC00001E26C8A33DADFB14C473B13FA858AFB2A
-:10ABD0006093B98BC2D68B73A72677723DDCD0B950
-:10ABE000539B6D8FF269C167AFD379550D1D090C69
-:10ABF000E32BE0BFA3084F2C9F4AFC483DDB1F3DE1
-:10AC0000411FF1F829641179BE6001C63F524F9B84
-:10AC100084FC333BBFFF855857947F829F790C7A21
-:10AC2000D6467251F059F9EB58EFD9E053E8BC8E93
-:10AC30008C2A8E4F3D5CFA7830564F623E31C0E32D
-:10AC4000FBFC69BAEFBA7AF5BD78FF22D29BDB8DA7
-:10AC500008BFCF0AD17E4BF863E937309BFB6571A3
-:10AC6000F84CC91ED1D79E493B5FB0799786DFE586
-:10AC700048FE998C74D7F18F33DB42E33AB33582C7
-:10AC8000677D25DF8F5C6FE6766CFD522BD567BE46
-:10AC90007127AF174BBECB12C1EB41D3AC7A7C7E90
-:10ACA000309BC3D1665A46DFA9815CA66613FF3884
-:10ACB00018D78F5C1FAE7D81EBB3FA909DE2DFFA6F
-:10ACC000E0ED35540F9061F3611D2D0B1EB04C4F1C
-:10ACD000EECB57DE5DFB2C08FFE40E2E7F920EA01C
-:10ACE0004F89BFA43C48BC46F11936C893A487A934
-:10ACF000D79F0816707F89C75BA5E23BC25AABFF9E
-:10AD000090D98B710CCFCB968AEF09655E7696A0B1
-:10AD1000CB667BC087EBEC9397FD86F142DDE2DFEB
-:10AD2000527C76BFFB4DBA4AB985B8D620DF3709C9
-:10AD3000BA176773FB3E219BF34DDDF00E92CBBA41
-:10AD400013CD24CFF6895CAFD98FC5F88FEC11A154
-:10AD50008757D37BE3933A26E0BEF2F89F2B4E8CC5
-:10AD6000F7FB83731E7E8F8571DFA6FD8EFB10BF00
-:10AD70005F43D4A1FB5E67463697AF33DB01E1C486
-:10AD8000EFCD96CBF9E3571A8F458E28741E88C0F5
-:10AD9000E5991D55D77D82FB40DB537CF8DDFDE74F
-:10ADA0003B6EFBFE2700F7996D37F9D04FC8680955
-:10ADB00010FFF464DA7C5B799E7622E6B19676EC3D
-:10ADC00077E0F73DA79FBDB61CF576A380F3B317D8
-:10ADD000D4C5889765CF3C7F233EAF0B2BE9E8BFF6
-:10ADE0009ED9FEF3BF67C338B5DB9AF0A431D6F223
-:10ADF000EC6B141798C25BF8FDED29E4E79E7E72B8
-:10AE0000CD8D88EF968E167AFED9935BA8FDFA3326
-:10AE1000CFBFFA5FD0AF3EE0A0EF9E3F7B611FD176
-:10AE2000A53EA8517D7A7F7CBD7EE73EAE2FD1CE78
-:10AE3000A31CCCE47A4CF2B5E4DFD3CFDC7B9DDEFF
-:10AE40006EC8FB6D229FD396C8EDC8E7426EEBC675
-:10AE5000DADBF0FAF973363A9FB3D1D25D8C717EAA
-:10AE60007D29E78B07053EEA3B16981BEDF43E8DE6
-:10AE7000F39F20EF781D02FC897560D06BDB25AA5B
-:10AE800067FA15F5877EA330DF33A3FA38FFBEB328
-:10AE9000B4D95C47703ECB9FC3AAF5CF2B16C58FA4
-:10AEA0002FD767DB0DE7AA65774ECDF5921E48F0E8
-:10AEB0000DD2F9BFD9B5C19664B87FCBA2A00FBFA0
-:10AEC0008F7FE9D4BB13F03B86674A9461447F557A
-:10AED000E1762E64A7791A701F09E28FED424E20A9
-:10AEE0007CCDB81ED6335E6319F889EF78C68E988C
-:10AEF000492F3C45E3839F43FE9BF7B5194FA1DFE4
-:10AF0000B3DE1CF48CC071DA847DDCC6E187F79D6A
-:10AF1000F6721ACF793DF7D717E27BE7974EC94013
-:10AF2000FF1EC6ED32EBE231E0C87CB48F38DE7034
-:10AF3000C4D3C4D04CB2535E0BAD4F9EFB09EB1F84
-:10AF40007AF790A87CC6E69B503F617EF85076E584
-:10AF5000BEECCCE8D5D54FBEC69C03CFD19EE5F85C
-:10AF6000E9FA4DCF117D7DC6396EE75F3E4E7CDB41
-:10AF7000887C8BF3074F18ECBCAC7759BFE738F1EE
-:10AF80006DCD6EAE8F1B77575A30DEFA7C899F7D70
-:10AF90000C8E6EA3E0BFF54AF75CFA4E6C8F8DBE47
-:10AFA000FF3B27F9B3FDF8A7A87F0A777B289F709E
-:10AFB0006E0FE7D3832613E5010E6EBD664B8BD271
-:10AFC000D7AE82BF4D72D2D8CC84BFBDE85DF4CF7E
-:10AFD0001A6A793D7A630C1F156CFEA815F92515C0
-:10AFE000BC63ACB3017F66027D3F59CF46A09C662F
-:10AFF0008FF3EFC9A17D421E9F67D7823E81F62D58
-:10B0000019F37D78E455EA38F08B91FF326EF061E8
-:10B01000DE6C7D5E472BFACFA1F18CCE575D6F6E53
-:10B020001F8B71F0FAF15E276012F0B68DFC6B5643
-:10B030006211F6AC86FCF246F7777C94D78E95FFCA
-:10B040003D4BC9BF6BF426FAF0BCDBC9BB9585DC70
-:10B050009FB13384BF11F08BEDC9E1D16184E7ACBE
-:10B06000C09FC4E33973179DBB7BEED709748EE193
-:10B07000E4719C5F53C77590FE7863CFCD64AF25B4
-:10B080005F26BF9840763B4D732A98E760ECB60484
-:10B090008467B680A75DD4EBA60A3B52B49AFB71D5
-:10B0A00029395C9E52724CE26A117C2ECF6509519F
-:10B0B000DEE1ACA03FB189EE5CA7869A08C953FDDA
-:10B0C0000E3E5E4682BFEC011DFF4AFF4AEECBE218
-:10B0D0003EEDD438FC3D42C051B07921D17D76ADF2
-:10B0E00038F76135F72B18F005E20DE8487C704B16
-:10B0F000C63CA2DBECD5CA5D44C75005E53FA57F41
-:10B10000163BFE75627DDB6D81E158EFD79399ECBC
-:10B11000C33A82EDA97E13ED2394A5521E24339DDC
-:10B12000FB8B99C25F8CCA7D60B809E639E54AE6B7
-:10B13000F40EFF5EC3FCF6F81CAFF4FF0C7E5EDF7E
-:10B14000389F8F37A53D3414E31EB9CF2CF1115E23
-:10B150009A3853AF4F6F12F8080F6633516F403C67
-:10B1600061A73CBC13E6C17CC2D6D14FF27C023F42
-:10B17000FFB92487FB3DE3D303C3D14FCB2C0A2C6B
-:10B18000E2F693AF33161F87B2651C704F19C6B134
-:10B190008DB7DB7D28776B5F5666115F87AC7828AB
-:10B1A00010F03D97437098A8BE8D0535A247637394
-:10B1B000201C9FEFA7929C3582DF8771C064E4F367
-:10B1C0000CE2FB30E77B6EFF64BE01F5A4DEDF9688
-:10B1D000FA40EA19B46FC8CF522E1A6FEC2E46FA15
-:10B1E0007E53BD72CECCE5FC1CE001E548CA4DF2B1
-:10B1F0004B5C5E562EF556E2F39520F77A7AC7C679
-:10B20000670827C62B52BF2FC90E3C90837907537E
-:10B21000A495BE4115FAB8F1A515C5F1BE2392FA61
-:10B22000D82ACECDB48693C2FAFD12ACC1482EA75F
-:10B230006B08ED51D2E2F8F998D61C695FFBD4AFE8
-:10B24000B5223CB1F56B2EB45D283F5B93E87B36AD
-:10B25000999F8A1D77B1E037491719A7E0BE07F615
-:10B26000DF9AC3F9659DE8F76C8E22E4226CE07FDB
-:10B27000AF29781CEB0FFAB363F2BD7F56BE4CCEFC
-:10B2800023ED692CFDE5BE0DAE676A69FFFDDAF7B7
-:10B29000893830861F77093969CE61B4EE7673E458
-:10B2A0000B92AB05C98CEA7E36327F3AEE07BE7A46
-:10B2B0001597077F4F318E3F342FE8C81D11CD0BF6
-:10B2C000E37D8C4FEA34164A009AD46D3787F5DF58
-:10B2D000D33C95CBC73F9F6C0DA9C0E7FEBCE0BE39
-:10B2E0009C11743E087D3717FA818DF6B1C0911E0E
-:10B2F00081FAA589753B10CF8D6A5731E631AB5D78
-:10B30000C14348FF8F4C5DF9BCFE83EFB31D137939
-:10B31000DF6322EFDB6989E4FD5B46F41CBB0B8C29
-:10B32000D75F5DE832A5611CF8C1EE3F3CF732BC47
-:10B330007DF7CB67EFFE21626B65D23D3F836BB536
-:10B34000550D68BAFCDCB1E4F87AF6CF82BEBDF5E3
-:10B35000514B13E2E6FD9FCFE5FD9A62F6B59FCF14
-:10B36000E5FA34FA7D14DFD7FEA09FF3AFAA72B9D5
-:10B370005EEF14755BB1CF278A79B69B59F146848D
-:10B38000674B32D503308D9F5B56FB68810FF7F119
-:10B390003B0BF939F93DEB14B203C7CC5CFFC0DFBE
-:10B3A000EDD68AA81D453705FDC45A67286202FDFF
-:10B3B00051BB283982E765C27D6D0CCA5AC849F570
-:10B3C000C3B3847D9CDDFCC65798F7A8D598750C4F
-:10B3D000BC77D25EE340F330F7BB0FE051342CABC7
-:10B3E000BA5DD4998A73D8FC53D44B4997F3EB8C4C
-:10B3F000DF97BC901B30E7C2FAAB5338BEAB1FE0FF
-:10B40000E7F1CAFEBB85DD8BE5B7EDC8AB00EF8782
-:10B410000AB72FB1F364E78DED40FEAB76079CC809
-:10B42000C7D50F9C35E8B5734AF7D33F43BE5C9050
-:10B430002CCE4763F9FA3AA521B95C6EEA70DF0CAD
-:10B4400054E3F9B2AEE2C505C8FF3DF97FC4BCDBE9
-:10B45000DE04AA73AEC3FD33DD7E777FFB67FDEFAD
-:10B460009B792DC8E78D1715E293597BDF388A7ACF
-:10B47000BD51EB26FE9965B5137D1A2F6AF49CB574
-:10B4800099CFE8BF975BE4F65F83EB0BFD684C2A2E
-:10B49000EDBF65C17DC273099DB7B150D49767E711
-:10B4A00005CB11CF1B921CF7627C78C1CACF576ABB
-:10B4B000B2F03A7226BE43967CC272938D7CB0F78E
-:10B4C000CDAF10AE1A6B90CEA99C3313E26915E98B
-:10B4D0001619E12CD5D37FCCB73A27D7857A03E06C
-:10B4E000FFC0C2EB88FAF23FA7C3F342BF7C90CD06
-:10B4F000E5E8837C56BB0BAF57C315DEFBA050B409
-:10B50000CB793B769C7A21471F0CE5F62BB430298A
-:10B51000EEF920F708797C21D77F07E255DE7F52CC
-:10B52000C0919DE7BF13F108FAF16EE2AB14164922
-:10B5300085F1AA5FE3BF57C096F7501D6BEFBA8A3B
-:10B5400005BCAEF8702D8D8E5B83E3413F3FF9F172
-:10B55000AFDAE83B383605F435EAE785790CF533A0
-:10B56000CC5B8FF3C3B89154EA9740EB606DA0B702
-:10B57000817FCF8FF0125D5656029F0E17E7EF7B4B
-:10B58000A37C25F929968FBE9FABF4B7BFFF7D84BE
-:10B590002B767F9FB181446FE2B76FF13DD9E8749C
-:10B5A0008E1790FB965CB2BF91217AB9937896FA88
-:10B5B000F28344235F240A3AAE12FD7AF12CCEB313
-:10B5C000CA28E27650C60B3F13EB72C45CA55D8BB4
-:10B5D000DD1F7008FA3B7279FD14D06503C229EDB6
-:10B5E000611F7A6FE2F4867E9B488F25F4DC930E10
-:10B5F000F6EC0EF093F03C4B78CF85EFF5C95B8C01
-:10B60000E376B8696132433FE1E95C51F73DBC87BD
-:10B61000EFDF95F4903E9AC540EF2857A61FE60845
-:10B620003CA00F9FC7FA118043C17AA43452035E35
-:10B630001C0FF0BD3337338AEFD8F98EE123F00BBE
-:10B640005FCE15DFD995B132A4D73DEFFC35F96E49
-:10B650002F9E77CEBFEFFDC41E7C0DC739F3FD379B
-:10B66000290E38668914B7DBE33CB744366F50A225
-:10B67000CFEFFD851AC2DFB7E8EC3AB36E06F0E50E
-:10B68000AC2ED58753CE7AF08BB747A27FDD65A667
-:10B690007D28F02F56E3799FC7445D216B36E6097C
-:10B6A000FE24E82EBF3396FA49FA09F3998FEBA5E9
-:10B6B000447EBEFA470BE6D177C6352C7008CF57CB
-:10B6C0003FBD7012F9CFF35890CEF79EDD663C5F18
-:10B6D00037F65CDED8F37831A18FF88A3D97F7F31F
-:10B6E000EFC5AF9BE9CDBB57C5F737B43CCECF9F75
-:10B6F000F753AFFE37C1AFB2BEA049D617BC72F93F
-:10B70000FA82A698FA82A83F22EB0BBEE6F505AFB7
-:10B7100018EB0B3E1F1B1F8EAF7BFD9DA47EC675D5
-:10B72000D0FDCF0B2FBFCE263C6727EE77E476BA4D
-:10B73000DF5F7D43A6C4533FF51DA9791C4F4D170C
-:10B740003D067B9C99E78DF1C772E979534C9D4486
-:10B75000F439AF8F90F903A02BD5E3493F30F6FBC6
-:10B760007A99DF97F2F3B1C2AC1ECAB7AD11FAD421
-:10B770003714FDE68FD11F43F9BDD9FB6A37803AF4
-:10B78000FB87D7156B8551F98A5D0FF0E567FAEFF6
-:10B79000D807E789F3207CCC47DF390AB9B8E7FB43
-:10B7A000E353707FF6CF0F5619BE5FEBFDBEDD226F
-:10B7B000FD40BBC19EB3187B3F7BF79BE4E7D558A8
-:10B7C00003F41DDD27AF7C9FECFC5C1670A19C9CF4
-:10B7D0007FE5AAFCE0FF859D97F0DC16BACFCCFD93
-:10B7E000FB0CF24FA609786EDBCBFD4C93D56FA610
-:10B7F00079FCCCEB745108CFE105658BE7E8DDD02F
-:10B800000B7F299DBF3146C0AFE0FB80DF1BC49595
-:10B81000CD0ABA116E792E00709D1BAF2DD7F9BCE1
-:10B8200078BD4909684CF7BDE804D69C8BFD4DD620
-:10B830006E559C5746E7CC2744F145ED64D15E7EBA
-:10B84000FB857BE6E07D3B3FAFD822E0B83F4F7CF5
-:10B85000076D65565C77823D729AF60FC535349652
-:10B86000FBEDA1425E979C88E721C0BC76FBD91016
-:10B870002ED6C99CF49DBFCD792182F18BEE77261F
-:10B880001AF346E87E678245785EABBFE731BF4377
-:10B890009126E06B117AD283E71516D1B90CA42753
-:10B8A0007F9A3C97CE27CFB42FA27DEDC71C13699A
-:10B8B000DFD38588C77AFB89BA7315E07966C078CB
-:10B8C0009E42D64C63DB1334B6ADEC18D587299174
-:10B8D00080FB527AF4DC48B3D037B72772B86E4F8A
-:10B8E000E471DE237926833F1290BF0F93C6CF5DAC
-:10B8F00038E7B25AB14E03FC9347F2B87FF22150B9
-:10B900001AE249FEFB316537F907AD1B8EBF8BA2EA
-:10B91000FA96019D5A93BD4B35F4FBEE14BF23A656
-:10B920007550FDC3967B527D58AFD36A735662BE85
-:10B930003494C7F3444DE2BB0FA048DD0E786FCBC3
-:10B94000B41CEA9751D54379D69E158CFCAA3E7C4F
-:10B95000FA35F03FE0FB496CE3791035BE2EFC0E62
-:10B96000D8E357A96E593EDF86CF014E45F005DE7C
-:10B97000BFA922FA3B4F457BCBF6E379962CA8F87A
-:10B9800078DAD24BFC3E5DF8F34D7B2B6F1D0170D6
-:10B9900015750D23361EB857ECD3642488FD667EDA
-:10B9A0009E6F6CFF81D81FDA4987BDDFA9C7472684
-:10B9B00088CFF1BDB149B4EE23224FC5847E18195A
-:10B9C000237FA3A3F240CFCB44BB49D417E2191481
-:10B9D000FE0A9E06A17E195C3E7C4CFE71B9BD9E9E
-:10B9E00045FF709CAAE8B8A4A7C6451F47E5109676
-:10B9F000586EF5B5D443BF8353F9BEFC482DB20F42
-:10BA0000E57DB4B896892B9BD54EF85DB934F2BA72
-:10BA1000B90053320115DB15CE152D38CE0D4A84F1
-:10BA2000AEF933D7B4209B5D9D5F24F241C1F1286C
-:10BA30009FADE3F9F7D22DA37C3E273C9A3193E7E3
-:10BA400071A7CFB4521DF6748D9FEFC4B460C11DB1
-:10BA500020677754F3FC31B6AB75F919B95F7204FE
-:10BA6000E29B9D71FC83ABF3B95D93EF3789BA21FB
-:10BA7000F9BC389FE7CBECF9134EE771F8685FF833
-:10BA80007C9EF0D34A5849CCEFD1FC350FFDAFCAAC
-:10BA9000DFF6A7278CCF859E98EE7FD44CFEBDD0D5
-:10BAA00017522F07443D54973897E5BDB11CEFEF6F
-:10BAB00056CE277D713B6B267D7E070B9911BFBD4E
-:10BAC000FA7FA2CE3F8279A6078CFED28C99B17EF6
-:10BAD00015E75739EF9D41E3F369D2EF9D68F47B99
-:10BAE000ABFFEDEB54B28B594F375C1A10AD7B6A4C
-:10BAF0008AA97B6A14754F4DBB171CCCD4D53D3534
-:10BB0000EDE5754F8DBBAF54F7D443FB4F47CCE108
-:10BB10007DB82F73643E8804C0B95FD4C91CC03A95
-:10BB200099F2285F264FE3F959605FDA67C97526F5
-:10BB3000F9909FDA4CE594CF6D7324FBF4F9D3951B
-:10BB40004B81EF74795C59E774A49FB8B83C9FFBB4
-:10BB5000C1EB159E4F0FDD69A53830B32860D8BF03
-:10BB6000C854D951CC4B9E167ED07A912FC1FDBFBF
-:10BB700061700D2BDCBFE97D1FBF9FC23C668C3E10
-:10BB8000CA4CF7D1FE4166CA10DA0798B9B76C1BE8
-:10BB9000E91BBBCD87DF07C8F16706B768587FD4BC
-:10BBA000B4778B56638FF2DDF87CC1AF492C09F96D
-:10BBB000B5372FB82B81F2829FD80393F2E1FD7A3B
-:10BBC0004B642833F233DDEFCFAECD13FC621E1B86
-:10BBD000B8730EC073FE6D0BCF8F3DC8485E5FD843
-:10BBE000934A794D6D1A23FBB2BC92F1DF8BD9A237
-:10BBF000903F7732959F43B47C2A233B782E6D0289
-:10BC0000D16F3E0B1FC273866A37990DE709DDBFFE
-:10BC1000CDD8AE671D646FEA77F4E167D25B523F1F
-:10BC20003630AF8A7AA8B1D3F83E1B68D48F65C28C
-:10BC30001E0C9B3EAE05EB3C8699B8DE620FFA7295
-:10BC4000A651DC5DCDED287B9ACEAF3A9F7C4AE5CC
-:10BC500072CEF5F188A8D634D8A511C2BFBA51E387
-:10BC6000BFB320FDA511E277170E98F6AAF41B3F8B
-:10BC7000029EE1E23DE9A7497D2DE952390A7F3371
-:10BC800002E2F07CE1EF14B242A42B8C4FF2A060F0
-:10BC9000A0C48F4CA6DF6F182DE603BAF3F3EB4C6C
-:10BCA000D630F251ABD24C7ADACA84BE5682A4970F
-:10BCB000FF3D1452910FAE63CDB7E1EF818EB176A7
-:10BCC00025915F6A0FFE44CF272D2C92BF5331F090
-:10BCD0000B3D3F93FADBB8FC22ED4AE43DEE6F4C9E
-:10BCE00066E007C2BCFEF7B91F7440E1F122F88399
-:10BCF00007305EFCAD6912F1C3245806F61BEF3421
-:10BD0000D2F966B7B13DC9DB870F54FDEF5980C446
-:10BD10006908CFE412633FBFD46FCCA8DF0AD8D73D
-:10BD2000BCAE7EC5A1EF62DE2069312B413F063CEF
-:10BD3000475FBCDF2BDD85F68298A0CFFECAAEFC44
-:10BD4000117DF757CE8B3CF1F5AC7BEE0EA52FDFC6
-:10BD50009C3BB85875EBF84BF2F34BA21E43794D60
-:10BD6000ECE30EE7F9C2A89DE77C53215AD723DF05
-:10BD700041FF3F483D207E77E486DDB608FEAE4EAB
-:10BD80009918E77AE49FF2A85D8F98EC5E4B21F258
-:10BD900089AF4D55FBFAF3AE342FF1CB30939FF8BA
-:10BDA0006504F3A5239D46593B5A34847FCFC89C34
-:10BDB000A0DDC01F7FCC47FBA7007F503EAB8F7D2F
-:10BDC000343E8FE11F49C7C3C28FBE9979298E982F
-:10BDD00028FCE84801E79F2AFBED1ABEFF4621CF69
-:10BDE000378CC38D47FA6ED56817ABAC463E88E5F5
-:10BDF0002F98D1A49F3796DFFAE39B01C837D22E44
-:10BE0000A65F996FBEEA9F6FBEBA1CDFC4F28BD4E7
-:10BE10002B3B6DCE2A3BE6B76A15D2C7C3DE1ED8D0
-:10BE200082EDAB1A0AA85E6667AA6F3F3D6FE6CF48
-:10BE30008777F955ACA7295A249E1704AAB0DDB418
-:10BE400098EF678C38C2EB6D063EC89F972D6BDE6E
-:10BE50008FDF093685F8FB2F9D6EA5EFA5C2ADE2F9
-:10BE6000FDCAF62A6C37B5F1F74FE2BED4B55827B4
-:10BE7000176EC1FB835717F87858CAFDDA9B049FE9
-:10BE8000EE5476EDA7F7DAF97BF30E5913E977084C
-:10BE900085DF7AA358E74D9BF83A333EBE857E97FF
-:10BEA000744E4F88FCA74F4DF5F4BB37FDC59F95E9
-:10BEB0004A7B2E5E6F467D8287795981AF0BF9BE32
-:10BEC000E5569862C400EE0FCAFD3EAC3FD0D71BCA
-:10BED0008C18C0EDBEECE74AE3DFB5B1C793295F2C
-:10BEE0002CF723231B98827A19D728FC80B8FB9360
-:10BEF000371735D3BEE4CD03E4BE64B786E7B29707
-:10BF00005DFAEB847879963162DE53A29E42DEAF11
-:10BF10000D17D0EF8CED4426A1EFF29FFA3DB5C589
-:10BF200039E34C7C07B7B380B76F19B0E5276D10C4
-:10BF3000BCCF33356B782E1BCB57E83BC07FED620F
-:10BF40009114475FF86FD658C4C2BFE323F8E7B631
-:10BF500058B6F2EF31B95E9A2ED5CE984124A7B7E4
-:10BF60000B3ACD1820ECD330360CF5CD7441B73BED
-:10BF7000ACE0B7925E6B37C7C8FF7706A0FC3FD630
-:10BF8000AFFF6C7C1EA31F6AC5BC7385DF3C1F7F9F
-:10BF9000CF54C5F3E2B9FF7CEA31EE37DFCF3A2860
-:10BFA0001F79FE71EE2F36C0F2905FFAFCDED77675
-:10BFB00063BBA123F6776643347E9FDF712DE5795D
-:10BFC000DDF38F3554607EAF76E3DB943FAE95FAB8
-:10BFD000226CD417E060707DB1E16ACAEB98ACFCCA
-:10BFE00077368781BEC0BA9461586F0AE30F15E7B0
-:10BFF00000ACC057C4F7FF03486F4CA47A541A4FE3
-:10C00000A57DE0B7FDDE287DA4DD88D51765325F0C
-:10C0100033308DF259527F94093F854D8C8D1FD757
-:10C02000921C0E13AD8D92BE220E927E07BC4F7EE7
-:10C030004797C91E3699F47E4698E4B2DC0AF68228
-:10C0400044C96765E23C81183A6FC2755D268E323D
-:10C050003E8FE10319C754083EB893F9293E7A513F
-:10C06000F0C1BBEFF1DF839B6E5F447CF8DEFBDC4D
-:10C07000EF9471D4B78F9F22FF50FCD44B771BF8FD
-:10C080009349F8BB169306ADC3FDF44E1BFFFD6B41
-:10C0900085D3D975E7917C7D7EF15DFC1D17DDEFC1
-:10C0A00043B44C4AB0E23E628B99C717D3267F5007
-:10C0B000314BA73F86A45746105FAD4AD7F7FE84A1
-:10C0C000F1C69BE23CD6BD9944F70B5DFCFE854D65
-:10C0D000D7F84270FB73B338DF4A699E8B25541240
-:10C0E0008EB9E2775FE6A9E157BB713F5609BF58A9
-:10C0F000AFD0EFB4FC0EE5B2CE14B1F0BC5E17E5E4
-:10C10000E9E5F8FDE72943145F5B5EE7F6B14749CF
-:10C11000F4F13C6FC8F0FB3FBFF3F27C943F2FF08B
-:10C120003ECE23ED5F6C7DC2B10537D377AE7F6322
-:10C13000FE14DC175534FE7BCFB1F3623DC2725D55
-:10C140009EFA982DFEFEC129A16F4B105730EF4388
-:10C1500039FED338FF2911179E12FB63A71C7CBF41
-:10C16000EC6F03781EBCC4CBDF4B14D753623FED9A
-:10C17000549A319E94FDECE27A628935B05C47575F
-:10C18000EF868466CC4B641689FA93458CC74F7B47
-:10C19000520DE72E64792B4BBCB8CF5124CE2DD84D
-:10C1A000C3ED32EE63E33EF313D941133EFF3FFD8F
-:10C1B0002524DF00800000001F8B08000000000025
-:10C1C000000BD57D09785445D668DDBEBD857487E2
-:10C1D000CE06618B9D7D0F9D0DC3269D8428B86082
-:10C1E0002780A06C0D0804C8C6E27CCCE8BC3406ED
-:10C1F00011F95CE2382AFE2E7F83E0EF366384A0DB
-:10C200005103D32A8330EAD820286A465B46013599
-:10C21000242D2E836F783FAFCEA9AA74DFDBDD6CAF
-:10C22000BFFABD47FCACD4ADBA75EB9C3A7BD5A93F
-:10C23000345A897D7B3E21C4EAD34F2D20A44F225E
-:10C2400033DB4DB4D4D1923EEF8B6265B65522A458
-:10C250008C90C1D69A6C6B227DBEC2A7277250BD4E
-:10C2600086D6D3A0EEC8B6D27E7DD3453BAFDFC322
-:10C27000EAF49F860C226401FC66A5A5D1E4910B2B
-:10C28000E9EF1B743DBE6C6C276753099164E22291
-:10C2900071B4924DAC0E333C1D673996478B28DA4A
-:10C2A0004EC769D29B364823B1BBC348C79BC3C79F
-:10C2B00023C3CD5A187F361B8ACCE9DAFF93144387
-:10C2C000C85C23593F8CB6CFEB1AACA7332075312D
-:10C2D000AE4C0BC04D265A8ED1EF4AAE68F96C3485
-:10C2E0001D1BFE4D082D09D19263627E08878B10BD
-:10C2F000807B8417E1DA58E14FFE8F5242FCBB0C81
-:10C30000962DF43B0D5D6F1D91285C0D02BE0E2530
-:10C310007C651C9F8418DD5F1809B99E4864201D48
-:10C32000A7D3E42C037C36187D384F3AA2DE41D7E0
-:10C33000C575E7B858847F307D9FCEE7A5163BF9D9
-:10C34000A72E80CF9516067FB55C5FA54F20E4D45D
-:10C35000CDC462A08F56EE5FD86AA4F59577110B15
-:10C36000FBBA5D4346D1F139BE22CD2FD1A1215672
-:10C3700023AFC367670E20D6EC407D88334E51A7AC
-:10C38000E31298C7723EEEB0BAA18AF74734A72AE3
-:10C39000FA5FB62657D19EE22A56D4D3368C51F492
-:10C3A000CF68AB54D4B3365DADE85F44D206120A11
-:10C3B00067D33E99B8296A73DCB58AF6BCA76F5279
-:10C3C000BC7F9C343F348EF6EB888A2924948E5AA5
-:10C3D000A362B640495C766F3EC5CFCD1C8E82F617
-:10C3E000058A71BE89B9721FACEBCDDEC5D7124A82
-:10C3F00057233B9729C65D2ED7B3756BD31DF5D157
-:10C40000F79AE90FE0B398F8F70EA3F4D1E8966C29
-:10C410001EDABC64136B17EF2DEDDC8CEF2D752B42
-:10C420009F2F7F5A59775592EC66CA9FBFB59A13D2
-:10C43000901E8692A16783F82A4007B413FDDEA9F7
-:10C44000C764B72105F093F5F038C48F8EB8ADA15D
-:10C45000EB758A109B07FA3F6FB6B9687DC9FE85F8
-:10C46000381F4392920EA2AC4A3A88CE56D281D956
-:10C47000A65CF781E5CA7557E337D69E7B4EFCC6AE
-:10C480004F52D285C06B39FDF939F1FA24E0333AC5
-:10C4900080CF923DF65613E2894C338E02FCB1F9FF
-:10C4A0001A884306394712A89CA1CF6D6C0872D236
-:10C4B00062726928FDECB04ADA63C6C038455ACFCB
-:10C4C000EB00CF7AC945E0BD28E24E0279D15AEEA1
-:10C4D00049F6D075293636C3CA912F4D8E97414EF5
-:10C4E000D6EB3D85D02EC6FBD2E4C4E73DD23B8BD4
-:10C4F000098597683D85280F8D04BF2FF0386A00A5
-:10C50000A3E3E5C48172F8254ECF5F7C5487785C45
-:10C510004C9AF7DAE9F7BEF998E177297161BF45DE
-:10C520006D4A3C84E04F85374A3656F86E13877B58
-:10C5300019216E4D5A283EA52EC9632E0434740964
-:10C54000B9ED3C5BC2C80EF03986F4FF43F92DF01B
-:10C550004B3B48C1F209BE671914F89EC0A7905B17
-:10C56000E23B06D22C27011FA8E418C956AE1301DE
-:10C5700021310AFFC37FAF52196A8CE31F1B04E30A
-:10C58000C0E409B99C7F872C7026019E8CA40DD72E
-:10C590006FA364DB20D3EFC897A5B4128ACF128BA8
-:10C5A0005D86F52A23DE59F0BCDCD8DEAAA5435D02
-:10C5B00046CE58909E063FD570363E008724E072E6
-:10C5C00049444BEBE3797DAA4BF23D9A02F0BCF56E
-:10C5D000137C773C2FA74249D78F82F9CF4FE8CB06
-:10C5E000E324EB08F85EEDAB59894037EBA566A272
-:10C5F0009ADF91D7E838B2C61F0FFDAA8953CBF452
-:10C60000AE1BF5CD5B920FE77D03B1DF01A5D06FC7
-:10C610008DA4FDCA59B4DED841F5560C94511E992B
-:10C6200096A453854FA23D0A750D8504E87B39D445
-:10C63000C5BAA704DAB12E87D6D7521886C49D5F33
-:10C64000BF3F9C62E1FAD19FC9DA997CABE3F8AABB
-:10C65000137ACBAD9C5F37FC328490BFEA294E8AB7
-:10C66000818F8C2ECD40425253385F169242189FD4
-:10C67000F255660A1D7F501CE5432998EF587FD17B
-:10C680001EC2772AF849335DDCD114DFE652BD9330
-:10C690008ADC85C1F05E003E841DB10CFA02BC2923
-:10C6A00056AC370CE8FEC00ECDA5DE64D0FF629D0F
-:10C6B0009AF4C409F618694FC4EF8AE757A7683897
-:10C6C000BE283D5E009E22AF433ADA43621D2ED45F
-:10C6D0001E1A1BCFE62FF0E708C5F734053E09C543
-:10C6E000678102DFD3C2E29BE3E36499F72958270D
-:10C6F000D97C6810E0797692E346E83FE288EF98CB
-:10C70000A409CCAB5AEE79EA51D0639DB20D78B949
-:10C71000713C93738DAFC8C8FABD5D06B744C7A915
-:10C72000EB7C13EDB39E162A487591F1D40FAF0A36
-:10C73000DFA1F860EB28E059A1827FEE81EFCC7396
-:10C74000AC08E72DE7C1C32DE1F0F0CD6FC83C4741
-:10C750003EC0973FD0971FF86E315FF7DFC7386E46
-:10C760004DA1DF2F7D7F780CE0A75AEEDA3B14F065
-:10C77000B05AB219E8772718882B8AAEF39035554E
-:10C78000E49F74ADCA7DCD360BC547D270934DA6DC
-:10C79000F8C8BA4576B8E9B8FF58BD2A6E212DBF52
-:10C7A0006EA19FCEA0CF258D03E98D6CFFF4777429
-:10C7B000BC2CF36CDB465A9B63A0F3A1DF49F94D17
-:10C7C000B4278DCA89BFE88911F84D97DA7C703299
-:10C7D0001DD71F2BDBC00E4E90C944A02F81E784CC
-:10C7E000680687785EF1F856C9670A3C9FD0EA2F41
-:10C7F0005949CB19B0EE6501382754F94BC0EE11F9
-:10C80000784E4863FD89D69F5C1BC41F65800FDA94
-:10C81000DE0D761DC56763A27E3DE8C15E23AB13C6
-:10C820007B36DABFAB8D8C3FBAA392DDA01FBB294C
-:10C83000AC5E1CCF6326A620B918651F7839859B8E
-:10C840001C90C9365A7C6FB10F8C457C58D838DCA7
-:10C85000DEEA256412E069F5E4CAC171B44C6C6586
-:10C86000F851D3C9AB29CCEEAF3F4D19AF24F0BC82
-:10C870005EEBD15B4CF05CAF787E94E2CD6508D482
-:10C88000179C48BF92A09CB1AD87FE0B374413574D
-:10C89000907DD5C1E711092F8DB15AA2A5F86894F2
-:10C8A00088E35CFD5EFB6F19F1AB9EFFE7BC3DB119
-:10C8B0002A3C7C47003EDA5E75E7B50F83FDD9E878
-:10C8C000D511037DB4FA958AC124CC78FD783E3D1C
-:10C8D00096B8E383EA5A1FE2A3F1F415F8BCEACE56
-:10C8E0001E3DD03D8C63A5CF5747D907DBCE81E7EE
-:10C8F000323E8FC6D3B1C4151FFC9CC993C0F80942
-:10C90000D8FE2C2090D2ADAB53766FA3AF3EBB4F79
-:10C9100033694B98F9EA5319FCB9895AE4973C0FEB
-:10C92000B16F0EF37DD16F501C95D72686E79A82A2
-:10C93000D0F97554FAE6C2FC2F9F48ECE1BE779A15
-:10C94000D38B9877479C6F31A7FBCC1A7350DDA22D
-:10C950005CC7442E173AAEF625C3F8BD93991F1F46
-:10C960008A2736CF51DA6609F05191E42C02395208
-:10C970003F8356289D0C9EEDD138F3037C1769DD6B
-:10C9800003F8A6FE57C9B9F0ADC77631DE570739AF
-:10C990005F12BB49A2FC349FEBADF95B975F4B651F
-:10C9A00067BF1FF3D526EAC7D04F7C459ADF3443D3
-:10C9B000BD4D423F658193903554EE2CDE56B21E3C
-:10C9C000D4C5FC2442AE8863CF6F83729D2EA06FC6
-:10C9D000F1FF7612AC1FC5F76FBE5B69BFD691BB86
-:10C9E000BF05FBE7AB834C3E508D867EF8E23F2AC5
-:10C9F000C7ABDB7ACD7198679DCA0ECA02438FDA46
-:10CA00002185A9DC4F1B4546811E58B9ED3B7D8C25
-:10CA100035321F7C4DF93D3D03E4A505CB8A547B9F
-:10CA2000592AC4190EB0793A529DA353219E72809F
-:10CA3000CDEB54FD29A6271E4B40FD6400614E7FBF
-:10CA400035CC32BA5BE93CEEA4E2248AE2C76060EE
-:10CA5000F690B0036579951C43DB477FB93A0ED653
-:10CA600037E1B9AB26C17889CF45DB019E8D15F63C
-:10CA700022881B6CAC31D95AE99046FA3EE80FF790
-:10CA8000B3A3DF180A5642FBFD95C380ECBA5EF7EC
-:10CA9000405C6583E6DBBDC368FF0D57105B2B0967
-:10CAA0007CA7A9ABE645984FF234A66736A6D88B8B
-:10CAB0002C41E3126ED73572DCF5EDCABA6F2C5DEE
-:10CAC000DF47F7A1594DE14B1D08722397B075263A
-:10CAD00067289E289DC0B783EDD71EAAAF4856A0F1
-:10CAE0009EDB2E7974149E868E1735A00FEB6FF7A0
-:10CAF0000C9A057AE919AD6D4BD0FC12FE32A4D226
-:10CB00001A13D047B3240BDA0BC23EBF91887FF9CA
-:10CB100048373339DDDCC8EDF259D10CBF0B882D15
-:10CB200019DEBBC948623494A56655B597A1BE5AB3
-:10CB3000AE8B053B096009B7DEA28C145F6A7CCA24
-:10CB4000EC92E8BAF74AFE4C18E46B88F9B03893D7
-:10CB50007B4B4AE838EB5399BC68CCE476623AB137
-:10CB60009B29DC8DBBB3366FA44D8601741D8B51A0
-:10CB70002E19CB8BD14E3682FFB3F4B5288F141308
-:10CB8000C00BB1D88B34102FA81D5EBC116CD32301
-:10CB900054BE5006EBD5F992918FA9DC91A8EEFB1B
-:10CBA000CF2D936BB494EE1A87523B8CD6DF4D9DFC
-:10CBB000C1EAA9BEC51A5AFF614B33ABE7FA8E41F1
-:10CBC000FDEC965B6BB4942F1A8B7D8B655A1FFA24
-:10CBD000E45DAC1D1C424A58594FB6D5B8E8F85F21
-:10CBE000C772FD6EF3CD05FA697C354BB33108DEB3
-:10CBF000F83426B7BE8E62FDBE4E21F36A01DFD93E
-:10CC0000BE4C98A7E8F7AF546117B76129E014EF5D
-:10CC100091A4F0E3FF99BFB7B48ADB25D16403E0A8
-:10CC20008D2E932B86E27F4F57D616E8FF406A1C65
-:10CC3000C7171DA734308EC0A3184F7C7719E85D45
-:10CC400090C73A166715EDAFA532F949BFB30EBFCD
-:10CC500093CFF0DF583BBC08D68DAE9796AF979632
-:10CC6000F9AB9BB13F8C1B5B88F2BF444BFBEF39A8
-:10CC700043FBA704E6ADA68F7D9C3E96B652418845
-:10CC8000765A1AD2D18468661F9252251C43399E67
-:10CC9000E3D362199CFDEB3158C2EFB4723C0EA78E
-:10CCA000782FB878B83FE6F3F9B9E10E5A2FBB0CEC
-:10CCB000ED9D395B82E121E47EC5385FAF55BD57FC
-:10CCC0004E1910E6119786EFDD19458CF89C6CE93A
-:10CCD0007F2FA590D9A560AF3670BB9AB8AEC0E0E3
-:10CCE000423D971A0D1BBC7A2BB4B74B7637D067F1
-:10CCF0003A850FF05B7B6D2987CFC2E1B330F8DC5A
-:10CD00000A3A2587FCC9D3CCA1F4DB8FF7FEF1F2F8
-:10CD10008BF9780ABE0E371EF047A4F530A5FDCC7E
-:10CD2000EB21E6A9C2673F9E55F313F8047EC6F7D0
-:10CD3000F295F4D84FCFA9621D557C9D7289DFAB67
-:10CD400060EF35FC96AE23D82756253D3774A4688E
-:10CD500016E407DEEB84B52C0BC4E946A6717F6FA1
-:10CD600038190EF2DB55C9E2A9AEED065BAB15E34F
-:10CD70007B2569E1E37BF85CEDEFF5C5EA89847614
-:10CD80009132DED09768F3DAC14E3D496CDBE8B8EA
-:10CD900063557607ECDB6C3705DE0BE81365DDC504
-:10CDA000F920347EE44F86F9951A2A77586D845C11
-:10CDB000F7E453289F4B0756AE4AA1F5DA279F6642
-:10CDC000F56195DF418866DA93CFA03C2FCDABFCAF
-:10CDD0002E15EA69CFB2F609F61D32EE383C5B3308
-:10CDE0007148C07E989E6665F6479586001D19E4D9
-:10CDF0001536D093029F91CA5283A6399CFD3AB74B
-:10CE00009F9FD9BE4639D7CFE5C29FF76915FE7CF3
-:10CE10005F8CD1250F847D2EAA4F29BC4BD39C0B50
-:10CE200001FF4DD13D73C114BE3DFA533DD843922D
-:10CE30009DDA1B101FB15AC86C3A4FA967A303EDC6
-:10CE4000C06536A316F1C9E35514B6B3749CD77602
-:10CE50003F73EB30F61907CC6334E7FFA6DD3FFDE7
-:10CE6000F809E8D1AF4D3608078EEE7A6415D85729
-:10CE7000A3BBDEFE89E95B13EE5789798F86B82361
-:10CE80007D5EDE69C0F98FEECA5904FDC7BEDF952D
-:10CE900006F431BEDBD30AE2A06FD7CBC39CC1FB43
-:10CEA00057E4B87436EFE2ED8B7E7C7CA927605F97
-:10CEB000527CDC919608F838B318E28BBD8907D70D
-:10CEC000FBD04E1BCEE299FC7D6A9767039F9F22A1
-:10CED000036CB0BFD06766E3A8E39C476A287CF484
-:10CEE000F9783F9D4190DD3CE1B4910A9040BD82CC
-:10CEF000C42AEA55C6218AFED5961445FB55493900
-:10CF00008AF6C9D62245FD9AECD18AFED7D92A14D1
-:10CF1000F5EBCB272BFAD7D86B14F5224FBBA27FAA
-:10CF2000C9BE4E65FB212BAE4349B7A30AEC799BE2
-:10CF3000D7D90AE5E53D6D5503AD2424BE5BEA7300
-:10CF4000B7C2F3B1679ACB3C2434CE4B9639715FAC
-:10CF5000C000EB2207ED135478911F7B35366B70C0
-:10CF60003C77F620E7ABB04E6F4914ED14D9571853
-:10CF7000FDF1B05ED5F3EE9163605DFC04E35F1DEF
-:10CF80007ADFBD6341CFCF91D1EEEDD012B41F3B1C
-:10CF90006616B821067844F2BDF409C8A939D1282B
-:10CFA0004FC6530B17E186BD5009D6C9A980BB8275
-:10CFB0002C55ADD30A45BDDAF25B45FFAB92D62ABC
-:10CFC000DA275BEF52ADD3FD8AFA75B64754EBB45E
-:10CFD00059B54ECF28DAC77FE16B05369AD0E39278
-:10CFE000CD74FE638EB455C1BA8CED76CD017E2929
-:10CFF000F5385B5184EC697E134A0FF5AB20AEF532
-:10D00000464B12967B5AAC1897DADB928DE5BE162A
-:10D010001B3EFF5B4B3996EFB4D8B1FC7BCB242C85
-:10D02000BD2D0E2CDB5BDAB1FFF6964E2C290647A0
-:10D0300080BE4888E7FA87D6C1DFEFD5F81A61E7E6
-:10D04000D59FF6BF514EF60EF0F542FD76D76994A6
-:10D050008B9FA413946FF119ACFC29DDBE2ABD8C03
-:10D06000C914E44F9D6903E881768DBD08EC6B6DB2
-:10D07000BAE60FDA1184DCB1D6916489657523AD07
-:10D08000E362836346347FB00F27E44FA03270938E
-:10D0900045530BF5BE28D67E364D53EB42FDC0F608
-:10D0A0009DA705F69DB5E961F69DFF74C26A867875
-:10D0B000CBC133596680EB208F2FD949916E3E2D1D
-:10D0C0002BB4453AD08B47547684283F335598018A
-:10D0D0009E768D6D3AD829AEAB75641B9517B51247
-:10D0E000F347FBEDC074666FF75D67407FE790C65E
-:10D0F000BE08E89CCAE927005F195BE36A41AFF408
-:10D1000099FDC98087B4ADB1AC9EE87F42B205D528
-:10D11000750CCEE15B2DB5AEFCB070A6C07CD470B2
-:10D1200066A6F3FD068F7D04E85F513F54636F00F0
-:10D130003D71A8C29E01F339E83020FFB81C667724
-:10D14000060839ADBD6C7A50DCC59DAEC3F7A6E9C3
-:10D15000199F919B64F7B6307EDAEE7466EFE3BAFE
-:10D16000813F776334DAE18734A46E7B183C7EC05C
-:10D17000F1F3CD80F0F1970FD3991EAC9C6AC6F104
-:10D18000FA5647E1BE6F9F230BEDA0BE668A25CA03
-:10D190001F7D279A4FEEC47683D812C3FDCD595C0C
-:10D1A0004EFDA96BD50F8769FF4F5747DB50865B54
-:10D1B00072513FDDC43BCF8937A2DD32A7764425CB
-:10D1C000E8A5597C9F6CAE593B08B7CBB4B17A0B3C
-:10D1D0001DE76653D17A50FF8B136AF4B1B45E3702
-:10D1E0007CC57A2897A5DFAF8FA3657DFE8BEBC149
-:10D1F0007C6CA0AC5586FE92EFDD163AAF796B647D
-:10D200002BF39FB85EB32FBFA87319820E018F4016
-:10D21000A714BFE8171EE1F816EF1DE1F85A9CCEDF
-:10D22000EDB602527056B9FFB30CF8A167CEBB99A8
-:10D2300011E2F4CA766EB77DA067DF5DFEB4CE1D45
-:10D240001C4F12DFFD289DD9D787F4C42E811D778E
-:10D250009319E9A370E677B79751F80BBB2C1ADC4A
-:10D26000BF1772DC4B307E5FF68513E5DCE53DBE13
-:10D27000A70E13A4F34EE093F3E9A9A9AEB5A81F36
-:10D28000467F4FF50FC8C533CE4F0FA31CACE372DA
-:10D29000B019E5D79E963558DFDBE2C2725FCB0648
-:10D2A0002E07DBB0FD9D964D5C0EBAB91C7C1A9F13
-:10D2B00077B5CCC472778B93CB41B6BF5ACBE969B3
-:10D2C0007692F33EC093D8C79C6674EA005F7F7D78
-:10D2D000C44064D89FE832209D520E78E2D10438D1
-:10D2E0003763B06CB4869E9F51CBDBFEF557EDF7EC
-:10D2F000AE4EB23F0AFCDD7F5E06ECB3CB22D3CF4D
-:10D30000416235833CD9917E432DC8E78356AB19E2
-:10D31000ECD68EADBC6EB79A75B4BE337D06CA9797
-:10D32000834EABD940EB2F6D9DC1DA5D567314ADC2
-:10D33000BF9C3E93D5DD0437B7BBD2E7A09CAD20A0
-:10D34000D21EE0872A63CA442AAEA97EACD8037CE9
-:10D350007055D2FC89C00779E956A4C3C9D6B57BFC
-:10D36000A07E4DF6666DBC15A2A145EBE0BDCA845A
-:10D370001A2DBC3771F88A75F0DE95E9F76B83DFFB
-:10D380009B94FFE23AA85F6BDBAC057B300FE45661
-:10D3900062601C5117ED42BE8AF35D23BB1C28C797
-:10D3A0000B3B1D28C7055E2AA7D5DC0171BAA64E26
-:10D3B000C922C13CA649FD9BF612B5211ACF506E79
-:10D3C000A172F6EDF4BAB8B514CE26A88FC1FA1F33
-:10D3D000D68697BBDE70FAE543CEA7A0376BE83858
-:10D3E0001F52FE81F368360E5F53D77CF37CD4570F
-:10D3F0004E33E8D7515C5F8EE1E5325E36F1F233B1
-:10D4000093FD63F8CEE791F9FA4BA00FCAB78BD919
-:10D410003C42F85AD9CEF9FA38C72329F52743BD3B
-:10D4200081B4619CF07CE7BC9606FB6F29705EA21C
-:10D430001DCF61A8CF4BD4132F1BAF5D75DE82F8D3
-:10D44000F4B80FDA19F41CE511F73F0630B93713B9
-:10D450008435381D1914EEECB0706B3312CF09B758
-:10D46000B29DC3BD94B8F17C9B1A0EE24C44DE5AC7
-:10D470006E3A84EB190A8F2F3C3C217030FF5D9C83
-:10D48000671171796A07256494811C341388DF045D
-:10D49000CB89C3E790136A79F473C9B973C89B1C2D
-:10D4A000C09B5ADE88735AEA52D873B4EE82737AFC
-:10D4B000AEDD5118A73F697596C2387D95FE1F35C0
-:10D4C000E09F25F890CE7E3FCC7939E041D2B3FD84
-:10D4D0007AFA4626ACDB098DEBCF601755656C41B7
-:10D4E000B9D30BCA81F2E3585A07BBE7F1A18EF119
-:10D4F000F01EC966F413E95CE7C40CA68F424BA288
-:10D5000038DFD8B7F9A7648C639D87DE23E1A15A81
-:10D510001EE77381BC2F8F4693A747221E89DA7FAF
-:10D520003D1583D08EE819A1D742F973FB893D23BD
-:10D5300032717CB5BFD833A4DCC8BE7BE524283B60
-:10D54000F5CE4DF3C14F1A6D403FE93D7E2E704A36
-:10D55000343B47F51EEC13D37E538E9E4900FDA548
-:10D56000F6377BF6CFAEB41686FA9D14CE890067E7
-:10D57000FDE79A3BE0D9C5FAA1F56B7E24DA78BACB
-:10D58000AE6BCE106DC985F8A5440671517CC4F60A
-:10D590002694655F78E30AADE07F0AFB81FBA7E78D
-:10D5A000398F54EE67F6C28433245B5B0A71A6019F
-:10D5B000B87F2395BFCDFC565E8A7D91716C0A645D
-:10D5C000AEC6E4D6A72ACE23256969395BF68D82DB
-:10D5D0007A2FF1E23E89DA9F7D8BC7A1A85FFB20FD
-:10D5E000D0ED7A7E4E89AE483CD06FF5EF3E9A7B07
-:10D5F0002BCA8128B487FAFDDA9D1A3C67D0A1B501
-:10D600000F1C0F7EED9A0CDB5A5AFFCC9BF8E06B97
-:10D61000B46CB2FC887813FC5BBFE63BC4A7A8F7E8
-:10D62000F0B86F9B8EEA1F5AD6FFB78C7AA89E90EF
-:10D630000DB86EE40DFDCA20BD48DABFEDC7FF4846
-:10D640002AF76A0081A8172BA7DA69BF1AEE7F10A4
-:10D65000F226AB73BF8BB852A7DAE9B83589BCBFE5
-:10D66000EB21561F21DA1F66FD33C478FFAAC5FAE5
-:10D670001051E7E3E588FA7BAC9E22BEE767F5022E
-:10D680005137B3F1CDACFFEE6D3BA6823D22E4FDF8
-:10D690009E0CAE1F8B48113F9FB30FE57FE47329AB
-:10D6A000CA76AE1FE63D23BBF423617D2647BF0B40
-:10D6B000FCDD2EE119BAFADB7418EFFE26AEBD7060
-:10D6C0005590BF22CEB138AACC76B0FF1A5ECADA26
-:10D6D00022F3733D607F10BE1F5D2D9B707FE2D4EF
-:10D6E000DD4CEE47B2DF16AF794DB19E21EDB2C4ED
-:10D6F000FC71D8B8A3DF3B79CFE0CDE85FA47B71A4
-:10D70000FFFC588624F6E949795CE0DC58421AB1FE
-:10D7100083BF9AF03295CFB0C65F78511E2F7E99A5
-:10D72000C57F1B1E7913F5DE02D98AF1DCEBF29D71
-:10D730003D809F5EB317E38A8BD7ECC679FD9F1CB3
-:10D740006E3758FCF9C1F8FC3E14FFA7CF83FFD316
-:10D75000BF26FED571E765A63D08EFB28B3CDFD64C
-:10D760006B66FBA236BE4E4735D6511C5F719910D1
-:10D770003F5FE4CD8C95E1F0B177103BB7F44E19E3
-:10D78000F845A79ACD04D67DF6AA7F143AC3C47D86
-:10D79000D5FEC0CDF0CDC400BEAC9921F84DCF2C44
-:10D7A0003B277E95EDBF307E076B7D7A1BECA31E79
-:10D7B0002138CE28EF517DF0F99889994C0F0FEC64
-:10D7C00064FB46EA735F1333CDCC6EE2FB330DB5D9
-:10D7D000EF8C83FD19C10F13A2493BC4DB295DDB2C
-:10D7E000385DDB80AE05FD06F669E87B61F82B400D
-:10D7F000BF4471AEEF9A4C6E5F06F07A7DE6B9E9F0
-:10D8000056D9FE0BE3B583DAC3B8AFB9330AE329BF
-:10D810006A3CAFE47815F86ECD64FC1F09CFAD808B
-:10D82000E7C49F1FCFAD9956453C42E03B927E52E4
-:10D83000AF8F9877183E2DBB143ED5677339A5F589
-:10D84000E17953F5BA6F0CE5A77BCFC34FF7FE9A8A
-:10D85000FCA4C69BBAACE7FB9DEAE7CF678AF3015D
-:10D86000BF0C1EFF7F8BA7CF697E5DD13E6FCD7E43
-:10D8700045FB7CD701457D9CCF5B05642EE2E357D9
-:10D880009CF0BF09F54B8DB3478AAF4FD9B1440324
-:10D89000FB6FE55E16DF6FC8764A5974DDDED3B8DC
-:10D8A0005BCD14AF9777B7CBB81FE62EC27DC055BE
-:10D8B0007C8EDF8DFBD7A7B752BAF98E1830FEE900
-:10D8C000793D476B2D08A5838AD332B107D98915D5
-:10D8D000C6582DD85315D4520E4737FA2C467778B0
-:10D8E0001E88F2FB4C23D125503E9F3953C2F34F83
-:10D8F00033093B574D4B8F93B64FD1128F81D66B67
-:10D900004C5A8F01F7FD58DEC374364D62D01217A2
-:10D91000B4938478F483A7C1433A5FD92EE379B6F0
-:10D92000E9E56CBFF02653BB0EF4E98DFB6E3F7941
-:10D930002B6D27EB5C65ECDCB6C863FB587331FBE1
-:10D9400080FA2CC6E77D12DF5796743638E7AA7E38
-:10D95000EFE34C06EF1479AD0CE75FFC0708DADD66
-:10D9600082EF287CFB0CC52C4F630CC049749EAC25
-:10D9700018B09FEFAF82FEF587AC8897A6F2B58509
-:10D98000B08E4D13A5CF0D8501FFA669CDF768A711
-:10D9900057CBCFB742FF53475868FCF21E970CFE97
-:10D9A0004A207EE99B0B7C793E3F48CCBBBBC583BC
-:10D9B000F4F469CB3E2CDFBBE2ED32B0337C2DDEDC
-:10D9C000B0F1CB4B8D17883881881B0839F0D96DA1
-:10D9D0005583812E6D595C2E18A561201788969568
-:10D9E000425E8ECA0A91AF63B2CEAD5795EDBFB01D
-:10D9F0007CBD503AAF4F627A514DDF6ABA16F44C93
-:10DA00005F2B93E8776FA2F61EE8D559C455504FA7
-:10DA1000E5ECCC256DBAB1D2A5D3F532D317C92424
-:10DA20004CBECAC5CB732BC22F57C9E81F88F30A57
-:10DA3000621D1AB242ECA115E759B715BFE6BA85C7
-:10DA4000EAB52FE65E9A5E230A7BE0EE50B8DBCEA5
-:10DA50000377DBAF0A778A55E4D1CC953581BC11C9
-:10DA6000384F0C765C9F9BE545D6A5B4C5E0E1CC6C
-:10DA7000727F0CD88D4B77C94887446BD70EA1F4C1
-:10DA8000BA84D36B0FF17C00F4B864DC12CCA7AB82
-:10DA90007B2CFCB9E246DE7F99A9430F702EDBAAEE
-:10DAA000ECD7C8CF15D73FAF8C8B368EBBEA388CFE
-:10DAB000DBA83ACFF35216CF4B2C26C5ECDC85D22F
-:10DAC0003E5597BD2D4411AFEC3DD382F180DD5919
-:10DAD000FE075CC383FCFFD0F5DB97756E7B4ED9E8
-:10DAE000FE2BD3AD6CDE8AF955174BB76B73EDFF88
-:10DAF00080790B793C1B6413FDEEECD70C6E17ECB0
-:10DB00008F9659597C5372B7C27E5BDF4F04E3474F
-:10DB10000B789C33527EBA386F30FA90BB959D37A4
-:10DB2000B0CB902F3A6A9FA30AB62B4ADE69467B98
-:10DB300024E2BE95C8B3E2E7872E54AE89B8DEA8CA
-:10DB400013CD6867D9BC16B487C69C6E7F13F4E307
-:10DB5000CF15EF16FA706C3CC35BA9CF81765EAF30
-:10DB6000CE53F621D809AF4485B51362B3D9FA4D27
-:10DB700075CDD7B1BCC390FDC0D86CBA1E53B9FCEB
-:10DB8000D718ED3AC053B5DCF3E00CA01FAF8CF111
-:10DB9000BDD5BF7FFFCF8F5ACFEFF73759BE43BBFD
-:10DBA0002192FDDFA461F917C555563CE707FE1425
-:10DBB000C4F744BC4FDD7F426E651ACCAF5A1EE7F6
-:10DBC000B5C37C36B1F9445A9FA635DF2AE28B9162
-:10DBD000BEDFB4ABCCB220880F6ECE9684DF613945
-:10DBE000660CACEF85D2C178FF4C85FDF3FFBA5FC0
-:10DBF0003145A6A625D59F05929BD9AF84D9B1B34F
-:10DC00008917CBB9C48FA593B0F3F70B880DCB9BC5
-:10DC1000793EF3811CE74C58973E9D7F109E9F7C78
-:10DC2000E9DFF9403727AF18DB06DB5EBF941DD76D
-:10DC30005764C5EFF7EDFC77329C83399F5C589DA4
-:10DC4000645F9E1D66FFF9EF15F24C966FF518EABA
-:10DC5000891A7E1B0399C8F6D1484A0AD243402E3E
-:10DC60000EDE2CE422ECCF167CAE61E749964AEE3C
-:10DC70000CDAB5D3A741D62A5894E296A1DEC1DAD0
-:10DC80000B1A62DD12AD178C8E62ED2B62DD104730
-:10DC90009F437CC88FF3A82884723E61726F21B1C4
-:10DCA000B37C07E24F053B6C5197919DF727BE74FB
-:10DCB00090EF8511FC9FB7B299DF3C3295C9F39183
-:10DCC00095CA38C53D5C0EF4E6549EC8A6E5A96C1D
-:10DCD000FBBD80979171DE8D0F9462DC9E80FF709A
-:10DCE0007CF46F71BF51BC97985BF900F47B416283
-:10DCF000E7D35DBB0C783E82BE31C81174AEFF40E5
-:10DD00004ED523D0CFCDED928878257E45FE6C8010
-:10DD10009F5C38BF91E07361BC9C3E28C7EF62FDF9
-:10DD2000C5ECDA69EB4C18E37781DD9B98EB7C1648
-:10DD3000E7AF27C404F37FDCE0DE82F6697332C408
-:10DD40002B973C61D080DDF01155B79087F2498B5D
-:10DD500011CB7F503F18CACFA81F0CE5E7D40F8620
-:10DD6000F29FD40F8672D1E922AA2C283FE5D8DF92
-:10DD700064F41D3E4FAB4BE05B7C7F971EBFDF9B87
-:10DD8000E344FCF6AFF72BC40D9B3A2FC4FA87C6C9
-:10DD90009D83DE22CB198617B15FA86EDFCED7B583
-:10DDA000B0438BFABDB0D317B338A8DF816C3DCE3A
-:10DDB000B360E7179887DA6BE9C7AF5DA2204FD150
-:10DDC000B0FA81EC3AC46F6F8EFD04C04DF9FB30A0
-:10DDD00094859DEFFF01F27FE8F878EEA04FF23FC7
-:10DDE000847E800A0E351E045C2FC47A37C2FB2F56
-:10DDF000EC4C0548A8BC218C6F808EA470F0AEC599
-:10DE0000F95E6FF097425ECBF567E5B0E78C7B7308
-:10DE10002A10CFEB04BD093CF1F5BA54BEEEDFFF8A
-:10DE2000E6744AC43D1E203BADA087CEC480BD57DA
-:10DE3000C3F7F73B3BD2DF03F85CFB64926145FA22
-:10DE400055F0DDB01C4627A22CD8A577C03ABDB04E
-:10DE5000EB58FACD265C97F445B47F744E8622FECB
-:10DE60005830FAA7FF782001FB5BE0533792CDD5FD
-:10DE700070FE6496F1F5BF0248732C9F57C3F99367
-:10DE80007949D25E28E75B53AE847327E27CFCC2FB
-:10DE9000EC8ABDC04AD7DA6AD04EAB00E112A40FBB
-:10DEA000AA8CD1B029D85FAFB6C42BEA57250D5341
-:10DEB000F49F6C4D53B45F939DA76817DFBDD65692
-:10DEC000A2E83732CE9F0AFE198503F9816C93F1DF
-:10DED0009C5EC1CE4357E7D1FA94A7A6DBC02C794C
-:10DEE00081B74FD95EE586F5E8A3F8D45303EA4439
-:10DEF000F95D0F3D0083A9ECFFFA5D4FEEB55B2F96
-:10DF0000C2FE8F60F70B39BBBCCB580672F642FDE0
-:10DF100000F5FA8CCE51FA0591E8A69F2F242BA389
-:10DF20009BFD32D916866E08B99DD3212BA71C64A0
-:10DF3000F963172BCFBE0479161FE08FFE52159799
-:10DF40001BA9B7BDB70AE2F4EFCA04F3F1785EDFAC
-:10DF500062F85D0ED03BB979F31D4312F0B90BECBA
-:10DF60005CC82FB5D3F157E470FBA9FEF53B86944E
-:10DF700006DAC9EACF15FDC96DD27A457D5D8AB250
-:10DF80007E77C5FAE0F723C9C5C59BE6EB9D98FFF0
-:10DF900029D9DD61E483984FF51B5178AEEF3A380B
-:10DFA000AF421F35961ED0C23EEC7511F4A8903FCB
-:10DFB00037CAA4395CFB6D392CCE7FED1B51780E2E
-:10DFC000E662C7FD88E212CF19BECCF4E84703BD74
-:10DFD000DAE075BF93CFFB64D9FDBFFF11F6475F51
-:10DFE0002178EEF3642C93FF851DC7351AD0830387
-:10DFF00018BD145A7C1AD02B7D75D12E38D7DFB4BA
-:10E00000D4CCF25F52FD1F18E9D2DF97F3CE1F8DFB
-:10E0100074DD3E8624C820BDDA074E11AD6F7AE666
-:10E02000ED69EBE8FBD7BC11E5D15C023C9BF8BE87
-:10E03000C4C84AC6E773816EB87E81187BD31DA41D
-:10E040005FDF805C00F8A1FE5ECE7B87FE0876F87D
-:10E050007EC6E770C24EEDDFCF0AF2EFC9638C2FA8
-:10E060008DF4879D5352F1F79E36BDE99C7CDE8E80
-:10E07000E76E2E94BF77E4F03CE1C8FC7CF01ABA5E
-:10E080003E4DAFB07B2D4E7565605E6C247DDEB479
-:10E0900049463EECD75F5DF22437EA29651EBAC0D7
-:10E0A0002BB1DB903FC5FD512BC7FFAB16F4E6CA81
-:10E0B0005D5A764824D27736C8C41AF49D17761B69
-:10E0C000EA30CF8DCFBF4FE8EB5D3FC455E4B3726C
-:10E0D0006D18BD47F5B42E01F4748D847EE5E15DC5
-:10E0E000832B014F8725E2B162DE163BA73C950DDD
-:10E0F00007CF4D786F4952369E4F16FEA5F02BA7DD
-:10E10000EF9A9E0176E5071D0B0ED39523C772D2B9
-:10E11000908F661017DAC187631D23202E31859FEB
-:10E120000F381CEBEF01B97C787CB404FBFD74FC68
-:10E130007530BE80EBB0CE3182DD3F21CE25E75E6B
-:10E14000D27D71D5F26D15D7C0FEF66C6201BFF2BB
-:10E150007A99D9B9E42F8C3F85DC6B92BC7130CFB2
-:10E160000339B5A773289E06AFB997C75539DEB4F2
-:10E17000EC1CE285DAB9FDFEECD312BB17C5C6EC88
-:10E18000FFC671DF3C3803F2E4A8DF2DD1F92CE89B
-:10E190007C1DEFFF51FBD9FDFECEFF309E1AEA2F0A
-:10E1A00039E27283E2E46ABFA9DF4E17F6DE367603
-:10E1B0004EFECDF10FF72EA7F5D5DBA2118F5F3DF7
-:10E1C0006170811CFF6A8B01FD9FAFE2FCDDABA09B
-:10E1D000BEBDC0E6C2AFD914F7A32DD1583F04FD90
-:10E1E00043FEA6C37B3D8E3F6EF0C0798FA54FE600
-:10E1F0006C017FEAF808EB73CF433CF0B944BC678D
-:10E200008038D9FBD7717E04FEB252D343FE2F3340
-:10E21000DA114B770C413926D6EFC4E3519847FF0A
-:10E22000D5BEA903215ED6A37911F378886C7281DB
-:10E230003C5EBE250AEDC035166729C05FF55FD785
-:10E24000CD2881EFBF9F48009EBEAE1D18AF0CAC1D
-:10E250006F78FD7EAA2B8DC9817E7DCBCEDDCE83EE
-:10E2600073B76978EE760C8CDF40C4FD8BECDC6D07
-:10E27000B12CD931EFE09EF079E4D7E432FBB15E06
-:10E28000C44FE2893109F8D04910DEBE7BB2B680B6
-:10E29000BFB330378E7FD7CFF32505BD7537BE8628
-:10E2A000F113033BEF17157E1F7B462ECB2B5E6CC5
-:10E2B000FC5E11BF695CF39322AED2984F50EF160B
-:10E2C000B75A4B56D07215C7F3EA54C74D00DFB2A8
-:10E2D000F6FB5F7A07F1F2D86F3E86EFEE3361DC32
-:10E2E00086BCC3F0A7F667161BBFE5FCB4596107EF
-:10E2F0001F7BE4433C6F726C675E21ACDB02D97B11
-:10E300000CEEE5EA357B3FBD9596DBF71DC47551F4
-:10E31000CF3764DF5E6272A51EE08887F32E8EE63B
-:10E320005CDC1766FC7E746301E24FC473FBBE0ABB
-:10E33000EF6F89798AF1C5FCC4F8A2DFFFE2EB75C3
-:10E3400052EF2D04FD9C06FB166581F69331DEC26B
-:10E3500058133C67792D27E3683D886E7EA9FD9DA3
-:10E360009B789CE78866ED2D7A4A7F3DED0FE89C0F
-:10E37000C172F422F775C47CC5B9529147FB9FB9AD
-:10E380003C9E3D828C88907FFB646E59D8FC5B7C00
-:10E390001E29FFB63FDFF607966F2BF26B4BAB34AF
-:10E3A000CDC179B6421E96E6D1E7F9B0EFAFD4EF12
-:10E3B000A52395FD23C9C7F1796C1D4BE3C3E7BBCA
-:10E3C0001EE2EBDC4A3CEC1E42AE17C772BC8BFB74
-:10E3D000BF849DD2C8E5B6C8F31CDBC5CE6D8EE503
-:10E3E000793B540A609E6BC83D6F4979A857C53D7B
-:10E3F0007D121D6B765CB87C612FCEE30AE2C7D23A
-:10E400004E2C5A2829FAB19C481C585E499AB19C56
-:10E4100044DAB0BC9AB463792DF16249723DFCBC18
-:10E42000E76D2CCF74F2120DE8D7D219E1EDE21F9F
-:10E43000CF8B0717DE2378B178B892B0FBFE42F09D
-:10E44000313C1BE95B8D0F75BEE678E2C38B4B2632
-:10E4500000E1A6811F6CC5F3AD55C48EF5EA0BC46F
-:10E4600043B9CFA965F9BD2A7C5485A78BB31C1F7E
-:10E470001B40779605D6A9348FC901B15ED4114BE4
-:10E4800002F9AF5E47F1BC34BAF23B2B1511C3F26F
-:10E49000EE988E79DC2595ABD268BDE0B907597D41
-:10E4A0006CE50EC8F31E99F7F074CCFB1E5959A207
-:10E4B000B3C17D729BA64FA4ED4E7E6EDAC9CF4BE1
-:10E4C000136791E29E2CE7DA5BF0DE31E708930DEB
-:10E4D000E01479E1721ADB5F4D9EE4794347FBED6E
-:10E4E000B23807E595C139734F8C15EC84B5D578F2
-:10E4F0007FD49D7AD65FDC6723E013F7DC6CDF9E68
-:10E50000B74A4A3DFF3CE8F8E97989309F0CCC8F47
-:10E5100073EE94783E5CE5E099546EF4787504F2FD
-:10E520000BC4F72CA9CE1C980F81A478CA17C3B8C6
-:10E530001EEED99E9707EB549AC7F30713524A0071
-:10E540008F0B521DA5D05FE44597C2BA24462E67B3
-:10E55000E7D98BA1BFFAB9C8CBAECE7396437B5334
-:10E56000F419CC37EB2D7A7FBD2F25344FBDD54E16
-:10E57000DC7A942BCAFCF4BE457ABCCFA9D4E16CFA
-:10E580008523CA97CFF68FC27CE13C67158EABF727
-:10E590002517D1F7FE3895E5BFABF3BD77EDDEAFBC
-:10E5A000C86F177CD69FDF7E8AE5B707F8EB9155D9
-:10E5B0002428BF5DF08DE0BB3190DF1E03F59C4544
-:10E5C000D06FFCFBDD98DF3EA1DBC7F3DB3F54E6F9
-:10E5D000B7DBFF7549F9EDC7F9BD6FC78DECBE24F8
-:10E5E000719FD4CA9D6CFF77A5C4EE935AF9277624
-:10E5F0009F94F00BEB387C0DFBB7AD877DBEBAC79F
-:10E6000016E27D5484DF876AA53FC17EA1B89F547E
-:10E610009D07D304FE20DACD1EB4BBD4F9304D8F54
-:10E6200055A13FD8A4B2A36FC9E3F11DAECF08B77F
-:10E63000FF96F077010E13FA677AB43B573EBECAD5
-:10E6400066813AE72BB2EF7912DC9F3C168FB4203B
-:10E65000F86CE90609ED5781BF914F19EC789FF1ED
-:10E660005383D16EA5F636CF6376337F9BD20A9C57
-:10E67000877F21D69F0A76F20BBBB26D54C29257A8
-:10E6800023DE43FDBCEA1EEA2715F7509F82FF8177
-:10E690009D7642E386714691ECFBC6D17AD909ADED
-:10E6A000CD6D0DDCCB7CBEFB8705FE0D7CBD2EF653
-:10E6B0003E62F5BDCF22FF417D2FF19DFC5EE2F170
-:10E6C00011EE2536C85D32DA0FDF6B15F7135FCE1A
-:10E6D000E12CB71237DCF73BA647AB58FF725F1B44
-:10E6E000017B28EA90561147305895F597F3787CCE
-:10E6F00080DF2F128A6F533F3E0D88CFF487119F22
-:10E70000AAFB9E059EFAEF7B1E6E42BA1FB37F875F
-:10E710000CF2E062EFFDFEB5EFF93EDFBDDEEAFB95
-:10E72000BAD5F77347BAEF5BAC7B9167A5A2BF7A06
-:10E73000DD4BF6FD4E791F355F6F17FDF939D7FBBD
-:10E7400007D57AFF1B2E40A37CF8F7981377035B5D
-:10E750004E896672ADDFAF1FA7433FEB3D6B7C95E3
-:10E7600019F89FEB2907D753E4B676DC8777707AE0
-:10E77000B179D93982E223ECFE8A521F3B4F30EA4D
-:10E7800044F8FCA0EBCB25C5FE6EE8FDC52CCF7888
-:10E79000EC19764E4FBDEF2FF2866AEC51CAFB1B87
-:10E7A00022E41189380EB5E3891EEC780DBBCF2E1B
-:10E7B000CC7DC79BE4B4E03C2227C677A619BDC92F
-:10E7C00040CFF129CECBF21303F9461320AF4842D4
-:10E7D0007F90E7E124DC0071C73E48B21D4AC8675C
-:10E7E00077C7DE80F70624108B6F1473777176F984
-:10E7F000CE6C18E7A864595F42DFFDFB986F924129
-:10E800003F19605FBB18F77D73A15D7D4FBF4F63FC
-:10E8100045FBC2F53B09FD876F60B0D141FCBA41B1
-:10E82000C7F31A557FC780FB53E2EF181CA543D4EA
-:10E8300051B93DA793E5512F4FEAE17E18BBC7754B
-:10E84000E17013DEFF44EC2536E6870BFF6A987C07
-:10E85000317AF37CE78B96277DA5F073C9F3F11726
-:10E86000B49F18809B8D7FF4AE68D43747EF1A8130
-:10E8700071BEC0F8BDE8F7CF69569E339EB7E62358
-:10E8800005FDCD777DAE68F725F875C328FCBE97EA
-:10E89000865C398BE2EFE44EC328E033BA6EF3F2C4
-:10E8A00083FC7BDF3D5913991D703E38BFC17974DD
-:10E8B000F373A202CE4F5B8E60DDD7E2539DE7710A
-:10E8C00029FC5251EADF20784F8E5F1A600B1767E0
-:10E8D000399ECFECF66E9E07D9CDF320BB79DE6270
-:10E8E00037CF53ECE6798A227FB45B2276384F31FA
-:10E8F0005B723C315FC2FCD1DB00CEA665FE42C834
-:10E90000B76B1AE99B2BC9983FDA925F16367FB432
-:10E9100010F2DE5F797EF60D60D79F18E0C27B496A
-:10E920005ECC9F7903D8F527F48C3F5E7FBEF2065C
-:10E93000C81B7B7CA8F32E18E74B49F6203DBF226D
-:10E94000E17E2AB1FBF4B5E7C82F6DCB67FB0BF76F
-:10E95000E7B37D0C513E97CFE4D9EBBCAC96EFCE3C
-:10E96000C4BC9F4D06CCFBA1DFB16B82F6FFD5F98D
-:10E9700059C57F3178406E8838CCD67CB6CF0A79BD
-:10E980005B30BF84FB0C2C6FCBE74D863C2F38EF00
-:10E9900003F7669043C4CEF2C0D8FD7D621DB6E693
-:10E9A000F3736770A17E69204FAC61FFD14F418E38
-:10E9B0005C97EF7C1AF99FE72F35C4BC8EE7265E83
-:10E9C000CDB7E27B74BE083F9507EB24C473481CA7
-:10E9D000AE3DBF2C34FF3D12FC2717791FCA4F09EB
-:10E9E000E44F05E54DBD0AF310708B7904C6393745
-:10E9F0005D8B785220DE756726F049B78ED97BE2B1
-:10EA0000BEDA62599A574BEB6F71BC88FE9FF2F5E4
-:10EA10005C9DEAD80FF358D6CCE26EA2BD4F6AFBDC
-:10EA2000CDC7B06EFB4D28EFD4DF17EFABE16DD84B
-:10EA3000BD1FF142E19D0B7006C1FB617E507CF071
-:10EA4000E4AE0F1F02945F2A9C179BCF6C18C0EE98
-:10EA5000450C8D4BD3850DB2A70CE2FDE1CAFBC678
-:10EA60000CF0F711E8F73AB81FD2C1FD904E1DFF28
-:10EA7000FB352ABFB4C3CBCEF57424E9F1DC0EE13B
-:10EA80007F6F41E8E1D507D8399FD52904DB617E46
-:10EA9000C00F926F2FEA85FE7BA324AAEF285D7C2E
-:10EAA00063719202A06BE72AD413F265261BD0F59E
-:10EAB000F6BF5DCDFD2BA677CAB89E298371008E67
-:10EAC000FC81A87F4AF97747199BD1BE1D4D5C3C5C
-:10EAD000DEC2E31277ED55F865FF17386EB02750A8
-:10EAE00068000000000000001F8B0800000000000C
-:10EAF000000BFB51CFC0F0038AAF9B3330E4593198
-:10EB000030CCB1666060B56160683047C8BD114700
-:10EB1000B0A9897FCB53A67F932403C31620DE06BA
-:10EB2000C43B2449D7CFAD8D6037AB3230F000F90C
-:10EB300021409A558381E1B51603032F903F03C806
-:10EB4000DF03C42780580528F612480BAB31307C10
-:10EB500001D27C40796D20FB8A1A76F3F9B5F1DB9E
-:10EB60007F5C0395FF138DFF401DBFFE2C4D02E11E
-:10EB70004B401E1BE6B3273F3E8228D03B10F830A7
-:10EB80005ABA7E6CC2C0F0CB9481C10E9AF60F20A7
-:10EB9000C90700C59E9840E34D8F81E1961903C3D4
-:10EBA0005E1CF9E20450FE36503EC61CBFFD0ACC86
-:10EBB000A87C615E4C35DF9810ECC942A872C7840E
-:10EBC00031D5F38A323000002621667DD80300005B
-:10EBD00000000000000000001F8B08000000000083
-:10EBE000000BE57D0D7C54D599F7B973EFDC99499D
-:10EBF0006E269310C24002CE2411A2243040C09849
-:10EC00004CE0E68B041270F87829565A27E8226DFA
-:10EC10004111DDAEEF2E2DC347435454D8A26BAD46
-:10EC2000BFDD812AEDEE6BFB0B162D9B049D8480CE
-:10EC300068F88868B5AE6D376AD7061B6C88C1D294
-:10EC4000DF4BCB7B9EE79C93997B33930475B7FB9B
-:10EC5000BEAFFCFCDDDC7BCF3D1FCF799EE7FC9F88
-:10EC60008F73C66AB111D775845C85FF1610327F29
-:10EC70002221646EF42A9E57D8492879262169F604
-:10EC8000435D33320859A8C9BE1A0F2113EC0D9DFC
-:10EC9000A488903262F3D8BC84B44B3FEB9A41EF26
-:10ECA0004FA4587D3602FFDD4BC83C4236DBE99F5E
-:10ECB000B4FC894BF44ABF3FF1474B98488454CB8E
-:10ECC000F54482EFED122FAF6B4B3209A922ECBF56
-:10ECD000F99748152D46AADC77D593198454BA685C
-:10ECE000293B7B7795952784962F25AC7EDD6E7C1E
-:10ECF0005F4A765F949D70D72F070A697D5754E36A
-:10ED00007B77CD6F8913CAC53C8771C01F940653AA
-:10ED1000494AC687C9F4EF9BC84D57657A55C61155
-:10ED20007273942EE62B212142C613D2C2BF5748DC
-:10ED30006006DC13F23CB69F2EE858DB43DC74DC43
-:10ED400019C5C457430738A1566F07BA9456A91E70
-:10ED50001BBD6FAF9E37B14723E4BB179AB3480181
-:10ED6000FD3CBC01E998C1E9D87EE1C577EFA6DF9B
-:10ED7000FB6B89CF46EF5BADBE898182E1FDF1D7A8
-:10ED8000A63B08AD676FA02319EB21E4CF57337979
-:10ED90003DB984B40572528371BE13D7C7B6BA08A1
-:10EDA000B145EFF7E8A4B6591B5EEE4598CCB950D3
-:10EDB000FD1AEC6729A7E57725B2BA19DB5D8DF35B
-:10EDC000D4CAFBDFA97724F714C0FB48B2858E2391
-:10EDD00074D1429EA555B4F55524417FB7EB9608F2
-:10EDE0003C6FEB53C3400FE26ECE5A5638BCFFADBA
-:10EDF00017D7CEC671053718DAFDFB3E3A5E0DC651
-:10EE0000F77CF2425ACF409FC525D379DDCB9FB71F
-:10EE1000069B935DF05D6F3ACEE7635BE9DFD3124B
-:10EE2000D3E3B1F95FCF096A50CE6EA447DFC0C902
-:10EE30005C3A6F6DFB141F8C6B347AFE3D6F47DCC0
-:10EE4000A7FB22952E5AAFBFDF27811CA5F71132F1
-:10EE5000CE0B72D176CC09F35B4F502EFC810AC7E2
-:10EE6000F56C1C3ED903EF4FC9C01F7E5704C73154
-:10EE7000D41FE8DF34E8A71BAF4FF2F69E8079C4B9
-:10EE8000F16D774CA5FD1D2856B09E03FAF672056C
-:10EE9000EBBB1291811F37307ECAF004B75981FE57
-:10EEA00077125FC803F5121CF73FF2F13FCDEB1369
-:10EEB000EDB4F5A5972BD0BFD5C40762522D6F696D
-:10EEC00087EFFDEB59FFA73CB04902FA5DB7A507F4
-:10EED000AF61DECF3DF03D2D90BDA95F02BA4DBEC2
-:10EEE0003F82D77DDB7ED90EFD4BDD491CA00BF6A2
-:10EEF0005659D2E0BBBD0B2739E0BD3340059FEA30
-:10EF000003BFCF756F271DCFBE2A05FBB9AF8FD2C8
-:10EF10009F9673865C3E906B67C8C3AF3E1F946F2D
-:10EF2000E5E338CADB7D998FC719D279B94D055011
-:10EF3000CE190AE135CCC7493C1B91EF360BBEB365
-:10EF4000066F8479CB18246E42E5F9E8A78B274237
-:10EF5000BBA27E73F9834FB5CC817E8F1F24EF59FE
-:10EF600067C035D200ED4D837138E1BEBB41423DF3
-:10EF7000154639F2F75908C98FEAA90CB2ECD55BEE
-:10EF8000F0AE1AE548E881D23ED522A5C6CA591589
-:10EF9000CAC13E2E07557D11E4132A67C72C944E33
-:10EFA000A10B54CE287FB5062C38DFCFF4ABA88751
-:10EFB000497E246B59CA70396ABBB86E36F45BC897
-:10EFC000D370FDF1FF867CEDA3E308C6D16BA23DB3
-:10EFD000216FE6F7A3CA9B2B84F2D646E52D04F4F5
-:10EFE0000C581C79207F4D1694137755733B9397DB
-:10EFF0000D286F1977B2FE4C58134639184DEEF6AE
-:10F00000795CE50AD4BF9AC9695BDFFBDB6C301F12
-:10F010006B08D71357DAE1DEFF00936BB39C99E5D9
-:10F0200030D5DF8DF2E9DDD94FE0EAD9518F7C4D43
-:10F030005B71A0FC2590C33690C3A2FF7FE4B012A1
-:10F04000D6712A7769DAAC4E171DF7A27EC2F0900E
-:10F05000B6B713D6F1EA6C1B5BC727BF7DDB3DF467
-:10F06000FEA43519E97F723C7D5804F732CA5DBBB6
-:10F070007757F666FA7E518684EF09598FF25D2341
-:10F08000F0123CA2F253DE239179E950EE833D95D4
-:10F09000F4FB577B890F5EBD9A2D637DC7FA0893F9
-:10F0A000632E9F357CBCC7F8FB81CB240CF2B900E2
-:10F0B00020097DFEE9F9FE2976FAEAF7962B8524E8
-:10F0C00087AEC79C6F05CEA8E6F2FF6A86AC83DEEA
-:10F0D00038B625254CBC585F04F8EDD5076C61990E
-:10F0E000B6379097FB5C8400FEEB9FBA99BEEF7435
-:10F0F0007D92122B9FBD7C1E3EE2F3DBC7F144CB19
-:10F10000F4C03289E2A257F37251BE06F23E994230
-:10F1100028A9EFC9FDC3877025A4590DA40CAF47DA
-:10F120007CDFE50E7E59A2F3D31BFEC009F37DE11F
-:10F13000F02733E04ADCE310778D86CF4A040EEBEC
-:10F140006DDE01388454513E9917E59309BDCDC752
-:10F15000806E257D0C8F91DA8D0C67BA185D28FEC4
-:10F16000CA82EF5EE2FD6A3D4F719A86E50CF5B406
-:10F170005A7BD60458FDF87D898BCDEB907EE174E7
-:10F180007F529208C3896CFE4AF8F77EA5F9BB80CE
-:10F19000B7FD2765DF36FA9DFF724F1589A3870EED
-:10F1A0004869C8AF65FD467E6DBD705006BAD0FE99
-:10F1B000CAD0DFD2DE6699E971C66725621DE97D96
-:10F1C000DEA0DF45FBADBDCF239E1FE855505F2578
-:10F1D000A26B071FC74B5C9FB4F179A20C85FD3F62
-:10F1E00046FBFFD008DF570233C6F45BC8DF82CB93
-:10F1F0004906BC5ED69F6EC2FFC6FECE57587BF353
-:10F20000815E2431BDB648E9BCFECF462FB35E1106
-:10F21000F5B6021D0B86F78B00538B7ECBFFFDE905
-:10F22000DA067F30FBE504C819E93924833C56CB64
-:10F230001AEA93D22A89E1723ECE7AF89636552B95
-:10F24000E4CA23A19DB7D82F856B006FF87E807626
-:10F25000E24091CD037A688267AFD213C36F8BF916
-:10F26000F7A2DF47B7EA38DEF6B96F6741B9A3D72F
-:10F270006FCB867958E4793B7933A5FF092E772D3A
-:10F280005B6BB15CE965F2C82C98973C2667F3F993
-:10F29000583AB9DEE9E0747B99AF9B6F6D0DE2F5EA
-:10F2A000CDADEBF17A6EEB26BCBE7AF9790DE6AF07
-:10F2B0002B3F17D7AF5AA5598967579598D6859789
-:10F2C0003C14EFD0F2757D6B77CFA2E33E75D98207
-:10F2D000FAF9547EEE8878A585CFAF28F78AFB0728
-:10F2E0009540B7FA5EDA5DEFF0F2A5BDC6764B89C0
-:10F2F000D40CF8AFD4F7BA42A87DB4A468BF168B7B
-:10F30000635A2F641642BDADD2AF56CCF124EE47FE
-:10F31000A9BF1BC7B924F28EE249495CEEB4D25DA5
-:10F320003F07ED54A68F4A7DEF55E9B4BD9A82FDA3
-:10F33000F5C817838A05F8A2BEE0109F5F17CEC7F5
-:10F3400012B19E15C9B561E84FDF00F6B3AB401EA0
-:10F350000FFD7BC822235F2EF1D810CF266C7F5083
-:10F360002111902F2582F3748AD6037C719ACA31B9
-:10F370007BDECDEE69BDF0BEDD6BD37C404FB7F0D8
-:10F3800047AC37F0477DDE9C53BE22584F64C4978C
-:10F390005D972B94347A7F1AD6574F943F4B397F21
-:10F3A0009E8679073E0ECBB8FE09BC2CEA3B7A3923
-:10F3B000E79122DADEE9B035EEF7812AA33CDEE2FE
-:10F3C0004E36DC57658F33DC9FEE9BFD6600DAA37B
-:10F3D000FD073C47421B0CFD3F0AFA0BDA7349B8A4
-:10F3E000FE9FB852D5770F940B1BFB65EE47D7E510
-:10F3F0009CC757D27A4F1D96914FABDCC67E555EA7
-:10F400007AF314E8A73AAA5F806E2FE98A0EE33EEA
-:10F410007D3825BC8DF2E54B05AF27036EA0FF6953
-:10F420004B683B9584CD6F4586B19E537DEF3F3C45
-:10F4300013F0AE5D463D57F1C78E9D00AFCE16DD91
-:10F44000D709746E2512D2A9ECC20119EA5B1536F0
-:10F450007EBF728D913E1B578E33E97FA37FA9D269
-:10F46000C3FC44F37D17B1BE12F0FFD0FB0ACDE818
-:10F47000179A0FCA20A6DE32935FA8C4C3FC4225A8
-:10F48000E01712E5BC6498DEA7F7D8BEDFB4AE9BE8
-:10F49000E53BA1FC5BC87AF0A790FEE5A3E096ED02
-:10F4A000DCBF62D4B744D927C5E28A166B7332E257
-:10F4B00086594C7F91FEF4B8FE2AB31E21E43EE447
-:10F4C0002B4147E20A918C79307E5EC6ACFF385DF5
-:10F4D0009AE8745CC57520C4F18B27AEBC9BBFCF86
-:10F4E000E6F2BEB097EA4D58AF7DB20BF4C6A9CB99
-:10F4F0004403793C4BF99DB5DC7335966FEB7A9BF1
-:10F50000912F69795C064F5DF6A1FC062632F96DF4
-:10F51000F7D628694C7FC69577B31CF492D0134573
-:10F52000745E4FE5E53EBE927ED77558E8018B8E3E
-:10F53000727598E1DED37D9B915F0728BF02D98762
-:10F54000CBFD392D76DDFFAF9277B39C0FC9FF302D
-:10F5500079677AEBD4A005C7537949C17AEAAE102E
-:10F560005CC7CDF27F9ADB6F2FE96F6A3E580F0BB5
-:10F570003E40FB987C66796776486B2FC1F6CB2EB0
-:10F58000BC2FD3917F61F22EE45CC8ED35CBFB7FBD
-:10F59000919C9B9F7FD3C2717F02398DCA7F08CB1C
-:10F5A000ED4821F9E0676B91927CDBBD20EFCCEF59
-:10F5B000632E3F4E16FE587BE837745C0D9459520B
-:10F5C00029A937929E29C00F13267AF0FDDD969E59
-:10F5D0004CB8FF3DE9CF9C4EAF250A3902EBAFA4F2
-:10F5E00013F200ED92E4719135B309794C0EDA65AE
-:10F5F0005A5EEA8DFC51A27426F7130FE0C16952DE
-:10F6000030199EDB289D345A9E28E710271212419C
-:10F610007A2DE542B7D4AE45D00F5F6CEDEB117497
-:10F62000C7F5638DEBC3E9B45E1291AE4E8F8EF3D6
-:10F63000A0359CE5D3609CE1EFDF0D7EABEFA9BE6A
-:10F6400067E3D0DDF219C709EA07E96961F40C59EB
-:10F65000927CCFC6C15B8BAEBDFEB792E8B514E815
-:10F660003873381DA53E4A3FA083F2E7AB6027966A
-:10F67000BA197FC9BF5775F0D310D91EBE3E4E3F91
-:10F6800036F27E3C26EB37516443E4CA66A44F2B26
-:10F69000CCBF06F4CB20DF8CE1AF85B28AE393EBDD
-:10F6A000C8265C5F48C4027A64B4F9B02A44916108
-:10F6B0001EBBAFA2DE6DE4FDB3D1E7DAECC4F325E7
-:10F6C000D7F9FA23749EC8EFD93CB52E32F2E5166D
-:10F6D000DEFFFB78BF403DA17D04F5537AC9BF53DF
-:10F6E00037C55B27760BFA737A99CBB7DECAC62F7C
-:10F6F000CAEF92993C85AE7DDE564DC84D3C6F8277
-:10F70000DFA5BE1389E66F53388E7CCF932D7CBC6A
-:10F7100021692CF2B090F3A55C49E70DC6576DA4A2
-:10F72000E30E3EAE35BCDEDB25FD7F023F4C93028F
-:10F730007F075752D58DF2073C0EE5A613FD5BFC03
-:10F74000FD569053526B7C4F9F6FC7EF5677637C8B
-:10F750004A3C3F26E93B65F6BE11BFD38DEF291F1A
-:10F7600036C173CA2F449E0DCF3DD81FCA27C44E41
-:10F77000EF1BF7DFF165A02BFDFE51AC9F9C337CA6
-:10F780006F050591CEAED26C767D0AF88EDBA73B75
-:10F7900056EB4857956CE2F6335BCFE6F3F5CCFEBB
-:10F7A00047B60E0EB854F46B290E3D1CA1D7745702
-:10F7B0004407BFF338D21D027B6CD54AD9A0E75766
-:10F7C0009BD6972FDF695C7FD76CC832DC7FF5FE54
-:10F7D0005CC37D70CB74437D6B77CE31DCDFB9BB0E
-:10F7E000D470BF6E5FA5E1FBF54FD719DE7FFD99A1
-:10F7F0001586FB0DCFDD1637BE29D6BB072DEF6D65
-:10F8000008D071ED805731785189C62F2D0C8F1992
-:10F81000BFA3ECE751E6413982AE08339F2AA6F830
-:10F8200067CF90FC6C36ACB71D216F064005DDAB91
-:10F830006888FF437A775E66140F547AD6D5C75B23
-:10F840007F457F145EAE9CF454C2BCE98AB19CC271
-:10F85000E3B59AAF1FFD30E678ADE25988EBBBB94E
-:10F86000BFEFCA2919A09768DD1E8CD36A635B4F6E
-:10F87000471D1FD584631A1F6FAF1CC6999B785C08
-:10F88000F38BFA65E8DE58C715EDA711F78838F94C
-:10F8900012569494789F417B6C09F40FD6E7228628
-:10F8A00077ECF41F5B6719FDEB78F9C0FD2E2BE0B8
-:10F8B000E34095B19F751C47513954404F94E49BE8
-:10F8C000DE433F674039235EEAE4FCA8293C5E3E04
-:10F8D0008FCCC379E072BB4CC86D35F3731057FC05
-:10F8E00038FAE2CBB4D01C6CDF907FF05A7E6E12F7
-:10F8F0007CB7A489786C149F3C38779BAB0270BEB0
-:10F900006EF5D5D2D2953EEE6FD265C4B3D7E5B3CE
-:10F91000FBFA2AE67F5A1CEC463F60FD9DE16D70C4
-:10F920009DB43EA2603F4C747DCA134E436CC0E947
-:10F930009BC5E99525E8CAE928F4F8A40DC679AC79
-:10F940002F32D26B29A7A799CE4B391D979AE87809
-:10F9500014FEA074999B808E4B381EB5CFE5F6DD62
-:10F96000607A5CBBF129EE1F13FCA398D635A13F4A
-:10F9700086D637CEBF8F811E079CE7E23885AF7BE6
-:10F9800089E4A83CAF614F39F8C933AC86F8C54269
-:10F990003ED6923C16EF28C99011F797B8DF88EB56
-:10F9A00067067A57CF8BF2E7D15E667F34BACFC94C
-:10F9B000304F75790CE7EFE4F411FEBF56EE1735C2
-:10F9C000F7EBC4945036E0A3939742D99B8BC0FFCA
-:10F9D00023219FB4CDBA379BE50BB07EFA797BAF7C
-:10F9E0005C0CA1FD76B277E4F8A2C0F966BE29F1FD
-:10F9F0008531CE5802FE62DA5E6D3F5D83E8D01736
-:10FA000046FE59F61402AE8E28D09F7AF75A05FDAD
-:10FA100065EE0605FCCBB5EEFD95400F3F09EF7096
-:10FA2000825FCD23F92240C70226BFEBE9BF58F918
-:10FA300015FDADE90B2A20EF351EA35DE3E7FC566B
-:10FA4000ED363DCFAB417EF39BF86DBBE0B3EBC928
-:10FA5000F5B17CE6E7F3A25ECCE1F21A9FCF44FC5D
-:10FA6000E2DFB99FF5573C4EF72E8FEBBDB3D58340
-:10FA7000D757B6E6E3F3E35B7D78FFF6D662BCFFCB
-:10FA800039F879E9FD1BDC8FFBFAD600DE9FDDBA81
-:10FA90001AEFBBB89F56F0F12E1E4FA996DBD0BFD0
-:10FAA00058E70BDA5D31FC54C7FB8DAC0F38A4204E
-:10FAB000BEFFD536E58802FC756E484E08EA8BE538
-:10FAC000F5DE030F51BAD8BE4D82802B6D1DFFAA03
-:10FAD0004CA5FC5F57EBB5AE83F642CDCA1CE0C720
-:10FAE000C8BF2AB9F0BC7E96F58E38ED8B7612B57C
-:10FAF0006FD66F2B6A8D76B05FF8D1FB832118E744
-:10FB000084FE6004FAE777AB9E787EE1F689EBDC51
-:10FB1000C04F8D17836EE0A7C689276466AF337F19
-:10FB2000B8CAF95494F7BB8DF17C95F7BB8D3E872D
-:10FB3000FEB6F58F4D0E44B952A559766989C7674F
-:10FB4000F637ED94E2DBAD4956866B9D3CBE4A75B7
-:10FB5000A60272062C0AFD9F40D906E44BD398DF1B
-:10FB600022D917E47AD9B88EA7150702A097B40C4A
-:10FB7000E2AB01F5A6F5B8816FE4E285E7619D256A
-:10FB800005317A1BEC1EB3FD1F7B2FE3D2154A49CA
-:10FB900087ABB91CA3AFC659A86916EBDFA3DCCFAE
-:10FBA00021E8AB71FA96784EFE02F4EAA33EE68FA6
-:10FBB000793483C565078AD7222E2BE176818DECB7
-:10FBC000C1F249A419AF3B38BD078ACF11907B59C8
-:10FBD000A1B83903FA630F87E8F74E937E573423B1
-:10FBE000BD254A933580AF7B1583BD2115333D6F0D
-:10FBF000077B1DEC188E5FA2765E905C05E28F118C
-:10FC00004FEDB41AED3171ED552CC80F2EAB299F75
-:10FC1000EEFF7AFA9DF842E927ECC4219C77EC6B61
-:10FC200004E231229F50947FC5E46F52B3591CC641
-:10FC30005CEF2D5646F705568E8F059EF09BDB71C7
-:10FC400084809E2AB5A71CD2F07A12B5477A678FB6
-:10FC5000E2B7DE86ED9F555CCC9EE0F940D42C9750
-:10FC60000CF6895D77837D38EC7BB7C520A7C3FB95
-:10FC7000CDE8F345F777093548E1BA54E8E1628603
-:10FC8000279779289EA47F2ED3189F9E2997C2DBA1
-:10FC9000914F7583BD555B5C731EF512B547D479E2
-:10FCA0001CA7D3FE3741BDB49ED7278AEF86F489BF
-:10FCB000E5EACCE1F504AA18EE21A17F5914EB3F47
-:10FCC000085076C99F0DF5B2EF69D1F6ABF1FAC1D4
-:10FCD000F556A0F8DEA59A13EE75E949C07B05310B
-:10FCE000F800E89A6733D2D9A4FFAA86E93DA3BEFB
-:10FCF0005D48F9F7086DA756DE540F2EEF9ABD6BDD
-:10FD00000FBF8ADD117688276EBDA7E08F9B01FDAE
-:10FD100019F10AF1B13C8ECA90A71EE99E2191B05B
-:10FD200017FA6FECC7C26C931D96611EC71E9CC765
-:10FD30000E85AE2374BE3AE83CEE41FB38BE3D254D
-:10FD4000ECBC05DE41B4A784BD47B8BDE7A2FF62A5
-:10FD5000F158192F5F7EBF4701FC5B6E37F9998719
-:10FD6000F28F09DA530B88B1BF65DCEE2B33D97DF6
-:10FD700042DE5F14FA52D8B55C1FDE22ECA9B291C4
-:10FD8000E3CB9DA67CBA2ADAF1E66B900302BD8232
-:10FD9000781319A29381BFDABD539B2394AEB7F8B1
-:10FDA0001C2CDE42FBA9087D8E7462387B292F7FD4
-:10FDB0008B4745FEF76B2C7E513F8ADFC25FCCE25A
-:10FDC0000667ED125B0F42E44D12931F5EE961FA84
-:10FDD0005A33F145B627500571204D917C61329C14
-:10FDE0005FABB83D07DF6FA1A4A8CAA336F9EC78D2
-:10FDF000F9E5DDE05A2565B40F4F7913CFAFEEEB8F
-:10FE0000AF84E919EBFC1213CE3EDBFF3EE6750D25
-:10FE1000144818F769F77E8AF68188EF44E977027B
-:10FE2000F351FCC59FA0BD3294B7C5EB5B2AEA2B0A
-:10FE30003E86F19AEFB88E25433CE60CC471E9F793
-:10FE400067947E0DEC9045025F518A46043DBDD11A
-:10FE50007C9308B7ABCEDADF4806BDF912C7F54789
-:10FE6000FD726D3C3FE70299F999C5F54695AD3BAA
-:10FE7000F35486E7C4BD98DF217E924F15313BFCD9
-:10FE80006F0DF36EAE1FCAAF46FF60A460247BB453
-:10FE9000DE44E7292A5FF738DE180DD78A719AE920
-:10FEA000601EA7F93BA7CAFC65775AF5E9EADC684A
-:10FEB0003B62BD33975F96202FA7BCD8E89F5C704C
-:10FEC000D9989773A73558A2527A562AD2CE540F92
-:10FED000EA3594A78E2B1AE29881FE8E9D30ADC72D
-:10FEE00007997FB48CC8611B5B17EA216E27E44633
-:10FEF000F0BFB91FA3B55F36D883F678F9E5FE2ABF
-:10FF0000E0BF5BFCEDA8579750BD3A2E8E5E5D2892
-:10FF1000F7ED1C07F2EB63FB3BCEFEB2BB0AEF35FD
-:10FF200009F361F5B25C651CF0812BBEBF6A3EE748
-:10FF300093E1F13CA1575D0AE006B3BF6D3E97BB6C
-:10FF4000F9267E08AA4338E8A6ABB9A3CF53227E90
-:10FF500018E81FB82F9E1F555C13E55DDD4D4CF46E
-:10FF60006D33FA9FCDF5087F1091DBB2419E85FD80
-:10FF70006B2ED7A4B2B8C7F1C2BB486C5E95D00750
-:10FF80006A71B3067EF1AEE291D70B733E5C39F431
-:10FF90003786AE9576633CF609457F10F8318A9333
-:10FFA0001A98BD5ADC80F6EAD202BE2FA8F02EB411
-:10FFB0004F855DDD78F321CCE712F95AC23E35F763
-:10FFC000BB6BE2F398CF335ABF851D7FCA26B33887
-:10FFD00004B5DB3D68B753DC17E7BB576C8C5E3F5D
-:10FFE00055F4FD20AF3BADBABB01E28C8536DFB3E3
-:10FFF00071E6A1D7C6E4BB2B41BCF55710F8988B2E
-:020000021000EC
-:10000000E3403A98D71B61C78A7D4A13DC4C6EEBFC
-:10001000B81D5B5AD080F298E6A6762BD0CDC7ECFF
-:1000200056D267B453976ADD5930FFE6F54E1EE4A9
-:1000300076ED18EDD65D0EC6474117B1BBE97B875B
-:1000400042A1295DFF1E972B8E013D76A511B407B5
-:10005000CEA4A9E10371FC0D6F737EAB963718F83F
-:10006000AD8CE312B5AA47037FC09941E6C74B3474
-:100070006F0F99707A4E3E29B739E1DA5F0EF4A01E
-:10008000F7BA0DAFFD989FFD70E1BA9C78F51D6839
-:1000900052E2AE4BBFE3F3B65CE46BD7327FE4DDF4
-:1000A000052AFA8527D4BE7702F9B49EF3E9121B1C
-:1000B0008EBBAB50C179E9BAD9DB0C71CDAE423BF6
-:1000C000E6A3B417FEEC9790AF5D562C19F24B04E3
-:1000D000FF9601AE86FAEDCCDF79B79BE9E12E8D74
-:1000E000E3179E37B291CFE999C31F3863F34656A1
-:1000F00008BEAFE77E72137EA26A246E1C47E4211D
-:100100007F5CCFFCC2778BF11E39B413E4AE8EF363
-:100110004DFBA5756E94CF232C3FAFB1B001FD45CB
-:10012000ED13DF52E17EA3FB4315EECDB842CCEBDD
-:10013000DDC53F65F9917C5E37823F9EF2FB4B99AE
-:10014000D3AD1E7ABF3C72B315FC9DC23F3B2C0E53
-:10015000C5E329356CF8A4C6CDF0F589CC6492943A
-:1001600001F492C312D02DE22049907FE6B6861D9D
-:10017000F4BE4EE99902B825D984173F7EE1503686
-:10018000C8F7F119BF55A0DDEB8ADF6B84714C2AEB
-:100190003E84FEFEAC23873AD3693D4BF3894FF78B
-:1001A0000CEF4F355F9FEECE60F94277FBC221D84E
-:1001B0007776E10ADB4F51F1C21B95B0AC0D8FCBC6
-:1001C000E804708888EB286E1E17E1F10972E5AA31
-:1001D000143B6F754AD00EFAB7B1F80D27F4773992
-:1001E000A75BCE61B901F8BBEA85395F013E2137D3
-:1001F000DB5CD7D3062FB87EEE9CAAB1F777B17A35
-:10020000E70769F9BA8243D9EB0A87EB9721F92905
-:10021000F8C3D620EDCF99453FCB06DCF606D5BB1B
-:100220001E6897EB2DB3BD645E57CD7931E67167DB
-:100230002ACB6A6D7361BEBFEFF6C6F019D5036BAA
-:10024000A1FF1B9FB4631E57DA91D75519F41BC544
-:10025000EF3552948F36723EAAD398FE6B2C24E170
-:10026000ED12F0DF87F5A52077AFB27CC30947DE3A
-:1002700063F9A3A6F5A18BAF1BC2EFDC35F17D942A
-:100280009F8F0F73790959A4587F9256DCBF12E6ED
-:10029000C52C27E27E7E7F4FDCF5E15D1BF79B0CD2
-:1002A000B2F71AD5DF10D736BFF7737BAA0CAE3181
-:1002B000F5DC6763B8575CAF210FE1896F53F96FC5
-:1002C000DFDDE1BE03F59486B87DE39143F910B319
-:1002D000C93C7CA88AEB0BB4CB643ECE09C4837ABC
-:1002E0006AA96667F103139F5B8BF747003E8B7526
-:1002F0001A0C722533AA47E4583F441C3B8C84F403
-:1003000037F362F2BEE8FA4E40AF54BA99FFD5CC4B
-:100310002769C554EFE024502E8C89FB9AF9B64E1C
-:100320000BBA219E4DE5E73C8B7FD2F50AFC137298
-:10033000BD0FE793F3A785FE83F52FD967E44F6BD5
-:10034000BE6AC02BE67EFCA3CD88FFC5FA9CE6EE14
-:10035000C1FE2DD59AB3A1FD09EE1EB4B7A87ECF7C
-:1003600086ABE033A1AF87F8AFF0A6C5A0DF81AFC1
-:1003700021447EA6784E12E8C13A37C329C4E44F1F
-:10038000EF728F6C6F749AD6BF332E665FD515935C
-:1003900024572AC83BF33B753D92BE3F39C62FF721
-:1003A0004FD6608B2DC6BFEE2CF8D2629713F40C9B
-:1003B000CBDF2AA1EACB9A1BF5670ABFA988F70908
-:1003C0003FE9307F66413BE6775945DE058FFF0DFB
-:1003D000CBFB4910771457E1CFB46D6F567C3C5E70
-:1003E0008278AC9EFBE106678FE20F65FE078ACF3D
-:1003F0007E6E1B3F3A3E3BC8EDCC5E501EF4BADE2B
-:10040000E6C2AB06F928B4AB5D8EF8B8ED656EB701
-:100410005D8B7C9E94E13BD6CE4726FE12CFA3781F
-:1004200098C9C184E2439DB178B8AC89D286CE9395
-:10043000DA44A690D4C47CB77448EFFDD4C05F43BF
-:10044000F878145C2CF8EB92ACFF19E898A85C1DC6
-:10045000EF47A2F78D85B6D5906F45CB9109A9ECF2
-:100460003A8D5E3B671CCAB6D0E7AF01FE8AE9470A
-:10047000D7F78EE0387EA5B27D365D97D6E5003E93
-:1004800038ABE8A9F6F163E71FB33CD9E7EA9E6D04
-:1004900054FE8E66DB717D3EEA6638E4752819C32A
-:1004A0004F9BD5E075F6B9A8EA7592CE959CE0739E
-:1004B000509A5563DB27767B72CFFD81185CB91BA0
-:1004C0005E4D84381FE39B07D51ECCC7B99DD66E01
-:1004D000A3ED1CD3E4CCB5F47EB69DF1E3B1903529
-:1004E0006EFEF36C3BC3CF9BD5C06CE82769DE84FE
-:1004F00072D620C901907FE21B9B7F6E474BFCBCEC
-:10050000D2CA68FDF3B1FEC3B47EC00D3EEE7F27B4
-:10051000AECCB8FE763EEE0821B5202F8FA619EDA1
-:100520004DBF9DAD7BF3A3F52F8EAD1FF3B3E6E278
-:10053000F32538CFCFB1E7F9762617E5B92CAF4DC3
-:10054000D051D4BB325ADF4AACEF08FB2ECFCEE3FA
-:1005500006BCDF02E79BF39F163AD87C44E3A6046F
-:10056000F56689C6FCF513FAC3C7E0BE9CF07D9919
-:10057000D2DBB87FEFA8D58BF900ED8E694F6FCA3B
-:10058000803C0923AEB7719E51EC3F946371BACEA3
-:10059000714C49760EE2E10E923BA29D237087904A
-:1005A000EB05C27F7AE500EE176BE1DF8B76CB4D72
-:1005B000B82EBA5FB11BF72B4EE8EDC6FD89152E9C
-:1005C0007E5E44DA37D1BEDEE5B897E1F9C99FE235
-:1005D0007EE505D907E5787E4245F45F7903DB3F88
-:1005E000EA62EBD402815F4D76C64B995D32E0C87A
-:1005F00044B8FE84147C26C2FC9A067CEF8F7C6D86
-:10060000C3214A57BD97B81CF4BE24C2E24C151C46
-:10061000D75728E12C581F6AB2993FAAE54FDD59F8
-:10062000B03E1CFF3413D78BEB94FD38DE498A179C
-:10063000F1FC4213FEAFB01FDA0679138B14898CDC
-:1006400023C3FB05FBD5C08E2871B3BCA0126AC5BD
-:10065000819DF1326D1FFC65157FA2F3678987EFDD
-:100660008D38A5562927AC1CC7FBD9CCBF341A9EA0
-:10067000AE30D903625E2B943D556097B4809D41A6
-:100680001FB5283B9474DAAF5D8304229BC4CFBFAF
-:10069000CBC9B630FB60B2650DD08D58997DB0CB1B
-:1006A000F5D776B40FE87BB00F2AB87D5061F7A27A
-:1006B0007D301A8ECFB1333BA1FDE254B49F228E20
-:1006C0001F66817E16F9E402DF0BFECB54CA4F8011
-:1006D0003C2FE07C28F0BE4DE0FD2B9B089C275072
-:1006E000A118F1BE8DF35905C7FB2D10F7027E3D11
-:1006F0009F79CA0BF11881F7AFB898BF9BE37DB122
-:10070000CFB203E43306EF779C1FC0BC8597B39943
-:10071000DE17787FC89EFC8C78BF4CE80F8EE76BA5
-:10072000386E10EFFBB9DE33E37CF3FB6BC5F98465
-:10073000E3F8283E36F26FFBEE1C8CAF94B8EC6801
-:10074000072CE80D0EDE4BAF995736FD662FCA51C8
-:10075000B20F3EB3713B6CD43C5013EEA776C34E40
-:10076000D87F539EC7F28ED2B25D55B09FBDC223D3
-:10077000A1FF69985C98ED806C17DA69954A83C887
-:100780008F1B11EF57682EC4DB8A523326BC6F963D
-:10079000AFDA3CDB887C9DED30E617940BBDA9DC1D
-:1007A0001B42BDA9DC1B01392AB7737F8FE36FDCC5
-:1007B000B1E73AECE2EB81D0D3425E3B1CD39460CC
-:1007C0000CFE1AE26B25578BDD5FDCC1F9F2078A5C
-:1007D00007FDAD1D76661F98F1D850798EF72B383E
-:1007E000DEAFB033BCDF311CEF173B62F09BD3CEE2
-:1007F000F0FE58F30A841D5B63B263DFB71BEDD8CC
-:10080000447CFD215FD7A3F4F4325CAB7811D70AA6
-:100810007A2A1CD7DA004FCEC4751571AD90E3610A
-:1008200074B5E61A706D39C7791DCA9871EDADB10E
-:1008300074315F2B46C1B5BB1C14D76A580E716D5D
-:1008400085C0B5495E03AE251AC3631DDFCBC771F2
-:1008500074A4313C6BC66389F107D76F265C21BE57
-:100860006F4921D9E89F1BC225D3E2E2924438C4E4
-:100870003CAE16C025DA5F029778709C663E3F9AC0
-:10088000A2A39D1FC529BFFDC6212A87BB2E123CEE
-:100890005141E0157FE48FC71A8A102F1087273A3D
-:1008A0004E8157043E11EB638BC2F249057E49E449
-:1008B0001F15D76BC52F2732FF17E21E336E117835
-:1008C000C55C7F8795E199963FBDF59F8A6316EEDB
-:1008D000A7DC47E5A45CD9867AC9AC075BC05B4D51
-:1008E000CBBFEC22E110D4FFA773727A1C7D6CC6DB
-:1008F00033669C32567CB328EF22E61B8E863B3A49
-:100900009430EE936F51EEB3833E32E31A333D736E
-:10091000B24903C40304DE49C4C750EE2E6714076E
-:10092000252A47F538E2A384F5D82F5E2B2E3AEF1F
-:10093000181117313D50E1667A20115ED9E57369CF
-:10094000B179AC627D69CFCEF925EE37EF55F1DC98
-:1009500084F6F353519F26C24B6D26B9EB003DA29E
-:1009600045D7AF8474E91D407917B86A347D21EE0C
-:1009700013E129B1AE9401E81F9F386E392589D95A
-:100980007D0FE6303BDAFC3E9A8762C45524A31003
-:10099000F9F81EBE1F3311CEA22B9893F9AF42D89F
-:1009A000CE2A6E87A2CF701ECF43A05D0DE4913C8E
-:1009B00058270276263767E64A2837CBE0399DD795
-:1009C000F22A16373A5728613CFD4CB90DE7F5D4A9
-:1009D000C72C4FB13D85F95FCFCC72F80ED02E7C7D
-:1009E0000CF5D275F99CA3BB0870C0AC24EE2F485F
-:1009F00067E35C921CD98071F339D32D21EF7079B4
-:100A00007F3089F7235DC3F85B1DC7A3103FCC9AE5
-:100A10003D7C9FC1D3495EAC1FF2E7B368B99D9698
-:100A2000EE8773E8238785C55BCD74FD98D31D08D9
-:100A3000638BA1437D9E5D7750FE77DCC8E256470D
-:100A4000AB6C98A7E380103BADF7A1FC9C9478FCBD
-:100A500021C6657EBE9F8FFBDCE47E5CDFCEF2BCF0
-:100A6000DF8D8A14027AA3A22E82631527ED7F8878
-:100A700016FD4A521AF6EBEC0BAF23DF9E4EE374E1
-:100A8000D025B4D7CE78983C855C5A18F66BD2EF57
-:100A9000ADAB46C807E92EAFC9677134422488AFB1
-:100AA000C11F39C3E9BDA256C671AF70EDBE17E4D0
-:100AB000F15CED1BC9702EE5D2410B01B95BE12A57
-:100AC000B90B9EB7A7303E063A038E5A51F5A56F73
-:100AD000C0F3FA7AE37C9C4CCAC171942A6C3E60E4
-:100AE000FEB2660F6F97AE7E41353386FEFE9FFDE8
-:100AF0008D14B3AE887C167B82FCBE44E39662F50F
-:100B0000AE1CF5474E28DEBF07F6CD048AD879180B
-:100B1000751E1282F86F9D8F44BC9CBF30CFA633E8
-:100B20008FED17E2F29556BCBF2907FC97830A8B1D
-:100B30004B9BD691523A57D9E9E04F67F37366AEB3
-:100B40008C765E6931C3F9A51CE7D7E90D18EFABC8
-:100B50007FA473770EBC97B3ABCB3D3C6E1A433F7B
-:100B60007284F9E79699F83CC5E4FF2FF599F206EF
-:100B700079BEDFD1FC675CC03F0FA673FE992DA143
-:100B80001CBD2E791E01B910745A9224E233C4633D
-:100B90008DE18F217EE0F36BA67B227A9AE964E6F1
-:100BA0000B33BDCFA498E89580FE89E85D5A5CFEC2
-:100BB00017A5EF05ABCD0A7CDB6EFD6D36B78F88D0
-:100BC0001CA34FCC74BBA07952404F9C1B3C87B8F0
-:100BD000EDF464CF57F07C2C2AC778BE279787E8BE
-:100BE0003C507970C6CAF3DB53409E299F59A19EA1
-:100BF0007A5DD21D207F8777DD8BE306397546E568
-:100C0000C84CFF61F247FF57447F7387CB91399FF0
-:100C1000ECB3CADFB7409F53BA2D4CF2E055E8D38E
-:100C20007AE2FA4AECFE5611676FF73606605F7A91
-:100C30005DAF05CF016A197C5E590BFB5D6B255CCE
-:100C4000D634D28DFDD59A58BEC4D4A71E2090CFDD
-:100C5000FEC864E2037DA535B1FC09FA1EF3270442
-:100C60007E17E73AD2F73ACB17319EBF94E233E6CC
-:100C7000FF2CEFAB403BA2939F8724EC0491F74AF3
-:100C80004CFB5E1AE1C9C4E8FE90A64B616647249E
-:100C9000D80723AE667BC17C3DDEF1CFDF003F622B
-:100CA000599E8A7EC4B2C1881DEA7BB8A0A316F300
-:100CB000DC6A2517C4E38E7FDABC03CE415A5EF0AE
-:100CC0007E5C5CD27AE1091F8CA3D5BAC7970EFA75
-:100CD000613B5BB71CD30A26AF1D01F7046BCB6BDE
-:100CE000BD3312E799DC93CCD7F7F6AF1D7810E24D
-:100CF000DE7DAA0FEC97C53CCE5FA7EC59BD96CE22
-:100D000067E722C9B78D3EEFBC61EFA60E88639CF2
-:100D100057D1DFD775E96036D819AF7DCF8EF6E8A9
-:100D2000F14F0F3E8D79267DEA3C18EF50FFAFD78B
-:100D3000D8FB8F5F3C097A6679FEF22268C7A190E2
-:100D40003DC04FD70D36BF0BE725D4F5AA7341FF41
-:100D50002CAFDD6FFF2BA053ED4FEDD783FD31E8B6
-:100D6000A986F9BC2E2958994CF55E5681F73B1996
-:100D7000D08E8FF874A46B3701BA8AFC04610F948B
-:100D800071BE6959E44D2131743D3798930274CE98
-:100D9000A9E5790C8BE400D8CBE75CD7A7A07FB29C
-:100DA00096E52F98E9B51C707A2AF4CF3B795D9CC3
-:100DB000F53BA7F60F5B83E00FBE81D9E7E6F77737
-:100DC000707A3B7EB7EE008CD7F17DBB0BE0B5238C
-:100DD000417EE6D464AEE7DD63F397083C43E96AFD
-:100DE000B7C6F80129DE5F9F1C1377BDD6F6BF9A00
-:100DF000CCF4C02539B819E85FCAFD2565DC5F92DF
-:100E0000A85F25A3F831281F219D96831F6326BB69
-:100E10004EA3D7CEC5DEC9063F06D1DDA067CF41C0
-:100E20007C0EF098B26C3BF4A3EB02F36724E2DF94
-:100E3000E579076FEB88D1775D563D1BECDCCE1B67
-:100E4000DECE82F9FFCFE2DF213EABFD69139CAB22
-:100E5000F550C1F2F1A0FF62F8F869988F6BE56375
-:100E600033FD5A16E5A6102DCACF828F87F3A584CD
-:100E7000F6A8E0EF44F301E5C01E157C9EA8DCB99E
-:100E800045D3E2F27FB49E8B23CAC16ACE57770066
-:100E90005F8D07BDACBB400F2FCC7A17EDD657B88E
-:100EA0003E1EE29394EEDBEEA17A27F4AC1DE3E85C
-:100EB000472FA978FEFAD167D6FF00D68DCEC10A9A
-:100EC000D787B88E97BB56D07EDD00F64301CE4F54
-:100ED000A712E337BC902CE2E6C67CDF9FB87E9376
-:100EE0005ECED659AD9CD27B265F276EF43E93042E
-:100EF000EBF94CBE9F62469B1A775DE61082146444
-:100F0000BC6E01E85F70D8584E1BDA9FDE6C81F82A
-:100F1000E08DCF99DEF37DD5E6FCC87F4F36ED7FBF
-:100F200032ADB7F64B23E769FC0BB77B9FE3F9BF04
-:100F30003FE1E70936F3F3049F877DAEF47A18F6B4
-:100F4000B9D2E72FC23E577A7F84EF7325D9633B2E
-:100F5000375E9CF7A4723A344D0C1BF6698AFDDFAC
-:100F60002D709E12E001B7CACEA17351B405792A43
-:100F70001C2F5A92FD7615F6737D44304FE5AFCFA6
-:100F800077233FECE6EBAC19C788F31ECDFD52A3E7
-:100F90007454C04F7574727075A0804F18F0CDDC1A
-:100FA00009FB1F8AC1D3A91AB32B1BB9DD16BA449A
-:100FB000C2CF4AD1F2A72F91830F313F5B4806DCA5
-:100FC000017F51165EDC4B10C72D2EDA85F617E037
-:100FD00040C06578FE580EF8BD5E443CB77870DEC0
-:100FE0005D0CB7E8C370DC10DD64A413C3E745AF44
-:100FF000A35F71716F7C7E8BE637ADEECC8BD9979A
-:10100000503F18ACE7F8C8157B6E826AE22B733D3F
-:101010006945CC7FBF249FFB7B783C44CCE78E4D59
-:10102000DDE82FEF2AB279C0BF60C689669CAF1693
-:10103000B17D64CACD6C3FEBE24B2C5E880C9319FA
-:101040003D9F4DE579BE2DAEA00FFC98753E13EE89
-:10105000E5E74B95E51BF1BC19EFABBDAA09EF879E
-:10106000D87AB89DCDE7998F09DA51CFEE63FE812A
-:1010700056B787F11F09A3DDB3C06D99F59007E25C
-:10108000566C7F66C920417F4949AF07FD4F0BFA77
-:101090004864EA0C3C87B809CF1932D16F01B87A9D
-:1010A000D3A11E4FE7784AFF050AD909E7CB64DAD6
-:1010B0001B749003D5BD09F7E3407EC338C647F6DD
-:1010C00058FAAA49A77680082CE07E35F1BB1513A3
-:1010D000EC87900F62E66FC4F898CAF94EC4BBCA99
-:1010E00079FDE57D2CDFCDCC0769F68BEFC239CFDA
-:1010F00015831A9E036D9EF7E171B0FE0F1E8338B3
-:10110000CFA524DF7698673B9B67318FAADC26C387
-:10111000FE0EA2B0F912F130B37FB5D4B46FCEDCBD
-:101120002F715EC256CDB48F8CE3F80ADEBB26C7A2
-:1011300021C3B9B5155CCF0CADDBF65C1ED762E7F9
-:101140009CB6F6CD1E31AED5EA62E7FE11D7F2515C
-:10115000F4DE76B68EF0F3054A8B4912E09CD23E5F
-:10116000C2F8EB114B38D91B5B3E6CD857EEEC5BE9
-:10117000B518CF6974B9AAC0CF564A58FC52EF25AA
-:1011800018CFD4C9213918332E112F51B95F4C957E
-:10119000D8B8049DCCFDBB7DD0680F7D2564DC0FE5
-:1011A00071DB03C6FD1BB76ECA32BCAF599F6B78AB
-:1011B0005FED996EB8FF92DB787ED0FF081ACF0FF3
-:1011C0005AB1BAD2507E59C0787ED02DB5C6F383BD
-:1011D000EAF4DB4CF2AB1BF8FBA8D4FD5D18BF258D
-:1011E000F997B923F979CB468B2387D879426807D9
-:1011F000C689B398F7BB7DA409BC609483CE5039EF
-:101200003B6FA7D7B3AFDC03F12A9F82062E3F576F
-:10121000A89AB072D56E166FA9CA886FCF0B3D68B9
-:101220008E4F8873014BFBBA910FCA4CE70096B8FA
-:1012300017C63DE7F33F34D3B91809CEBF18B67EC1
-:101240008F757C3CCE34EAF878BB25A4FB98D39B01
-:10125000787C631DD7507E179C4748E9D10D8F26B7
-:10126000B2F71A95B79D69F978FE4586BD424919CE
-:101270001FF577127DCE98F2D1DAB91F9FE82BC601
-:10128000749E6986DDC3F84267F868A7A487E1FC0D
-:101290003C731C55CD177154E339188E9D442FA013
-:1012A000240A55108CEB8772ECE11D12E493B37D98
-:1012B000A68D375870FD69BCA8EF81FC94A61B145D
-:1012C000DCE7582D6B585ECD66EB931F72EF217FE4
-:1012D000E2357DB5E1FC0EF77617C889FA347B9FBD
-:1012E000683C6D13D5D5F1EC859B52181E3AAB04C2
-:1012F00066A6207FE86E168F08E37968222F3751A3
-:101300003E2E058E2EE44322F0019BBFEF403C258C
-:101310008EFC56A53039F31748612BE497AE246153
-:10132000EB0876659BDB12D79F5198C2F359AE5CF0
-:10133000C573EE5471EE5E163B77AFDD749E65218A
-:101340006FF7788A9DF181F7A021DEEDE7F2B0D842
-:10135000B38EC4E25971FE8FDAFF3EFA99CE8C72D9
-:10136000FE8E886FEDE6FB9A2B2F5902F1FA3F9023
-:10137000A2209D9ED5AC71C7F700EF6FDB141F9EB6
-:10138000B7DAF8B8859D17EF6E9C84FBBE53FE8AD2
-:10139000307F17EBFF622EA77E777807498138F5FB
-:1013A0003B4FC2EF87A8C536F0E591333734E0797B
-:1013B000B1BBFB295EF446C797C2D71BFFBE8EDACE
-:1013C0005CC0432765F4F7D4F4B27CF3A5C5FBF900
-:1013D000392D3DB88FD1FCFB2525B5411DD6E5A59E
-:1013E000F5911D887F7C9E72FC3D13E2DB86BFAFCA
-:1013F000326CBFA586B8AB6D90F17DDB8F7CEDF8CC
-:10140000FB206E811BF5FAEACCE8B96165173B76E3
-:101410004208C67C6E98F9DC216197A9265C29EC0C
-:10142000B13A123EA648C3FDCC89ECB1BD29DC1E01
-:10143000BB81DA6374FE6FB7B13C5BFF16A9188CF1
-:1014400046C7166922E8AFA7F83CBD5916C4F35B3E
-:101450001A13ECBFFBDF5CCEDE2C8BE03EA7366FB1
-:10146000D0ED1BA17C610ADB27A85E61E77EA87630
-:1014700096D73574E5F93082AFE7396D782D75323E
-:101480007B7BC1D5E7B2465A3F4BFC4102E3A1FA50
-:10149000256EBED80BD03EEC178CB0F32BD4A6F73C
-:1014A000ABE2C9B390C3CD6AE067A03F764A9BC266
-:1014B0000ED403633FD772A6FCF9F5CD554D3F918D
-:1014C00042EB7DCDFA0F1E908F1D41E3EF4E89EB6D
-:1014D0006B5AD08EF477772483BD7931297836859D
-:1014E000FBBB617F615BFFF376D4A726BA9BEBB9A8
-:1014F000CFC9E653F5B0F7E417BA67798C9FA4CE4D
-:1015000029F1F5437F07EA9F6DD5FF0DAE0F56C455
-:101510008F43662A15BF06FA556B811EB8B6F51FB4
-:1015200040FF714A92FE1EDC9729FAFBF0FD3F59FD
-:10153000F50F989EAE727D981FDDEF90689E21702A
-:10154000F1617E2CBD3E1F9D33EC814136CF7A5038
-:10155000BBC67976D2EB1A585BE8F73D65F1E3ED4F
-:101560004F717EA27286F982623F8CDF4DF478EB78
-:1015700097284FE75F7562BE7B2800FBBACE4CB25E
-:101580009003317A4E9C63D0D8CFECC281FBA50387
-:10159000CC2E2478FFA3AF790F407C77E5142EC7BB
-:1015A0007C3FC61DF71BF7498B766F4E95C6249F6F
-:1015B0000FF3728DA94C3E1F4FBD46F9CC60F50864
-:1015C000395515765DEB62F57E98CAF82C294D12D7
-:1015D000F9E9F94E26873D29D7363F4FACC8FDFCC7
-:1015E000FC21E441F519F3F51EE1F220F415ED6755
-:1015F00019CC17ED6730E9DAFA9959F205F0B1D84C
-:101600009720274B067F78C0C9F8E90EDEDFB38A42
-:10161000BECCC9E477B97364F95DE564F2BBDA69FD
-:1016200094DF5B9D4C7EBFEC64F27B9BF373C8EF51
-:1016300047203F90E7C8FDF8E49451EF505C7C17D9
-:10164000D4BF5891F83E6FF21B29C6FE58DC1B240C
-:101650003A5B2C9F89C50D14BFEAB8AFE34D637D9B
-:10166000EFF0758BEAB1CD50EF3BBCFD1DFFC6E836
-:1016700007747C3E8E5C0A3ACAB60637EC8B4DB4D2
-:10168000CE059C6C9D2BB7B17D17E4246DBFD03087
-:101690009E6D40B7A1F184A865177F3CA1B8E3E92E
-:1016A00036D617339EDD50AF18CF82ABA74694478E
-:1016B000BF904757448675DBAFC45F17CE38D9BAA1
-:1016C0003990AC3F09F432F397B886397F25DA1F99
-:1016D0007356A90843FF4A14A6078916E99163C601
-:1016E0005792DF20C61DB4C4FAD97AE3EBC9E79C50
-:1016F0004372F71CF2DF3EB69F87F2F58FA19DDBA8
-:10170000C7B956E1FEAF4F98DE7CEB4F5BAC69B4D6
-:101710009DD5197BBF03D75F3B59DE4BC3C51C2743
-:101720004C434F19DB17D938919DA7D62819CF55AF
-:10173000FBB59077AEFFAE41BEDFCA913FBB7C7C6C
-:101740005EBD40E9D3CDF5528F23F7DAF4D2DC2F1A
-:10175000A0FD955308E2E3C6FD2A9EBF25E4E67688
-:10176000985B760E820E79145FA5F7167A3F0846CD
-:1017700037ED47309B10F76C2C1752F19C04BD17C6
-:10178000C651ADE9E7E14AF5D04770A57AE8775C44
-:101790000FF57D1E3D7402C644BF6FA23CD40D7C84
-:1017A000A88479DE2FB747F8584BF28FC5FDBDA945
-:1017B000B6DE035A08F206F3D93ED544ED46C0DE44
-:1017C00080C49504BF6725AEE58FAFB58311B083A4
-:1017D000E23AF0A3BECCED9436685F83F62CF8FBBA
-:1017E0003FAF1119E3F0E6FA1A27F3753F85F3F3DB
-:1017F000C475685FE9578CFEB54A7778F7EC22F834
-:10180000BDB33BD83EAC2B77905585804F8204CE3C
-:10181000E154E915F23745BFBDA953193EE5FD5422
-:1018200089A42C2C88EA91CA7E12595084F806F3B8
-:1018300066A11E0FAF275808EB7D9A02F1BED712A2
-:10184000FC4ED3E372303F35C6DF584E8C7885CEE0
-:10185000FF0DA9E371FE6F4C65EBD074B8D2F92F80
-:1018600080EFFA9C4CFF3D2E0766C2F360060B41E9
-:10187000D3F2BE54C62FB352E77E7E3ED941D8EF95
-:10188000F202FFC6C6AB9FE5FAE1E8F8A00EED5400
-:10189000FD6859E724FAC986E6063CFF78C175FD64
-:1018A0009F9C85FCDB2C15E3818D8F18D7911F72CF
-:1018B000FCF3D2B5EB19C41154FF2D81767710A635
-:1018C000FF426EF6FBA30D13731E65F0911A9899F3
-:1018D000D1736DAB5CCBF0DCAEAF3FE79D0DE76045
-:1018E000A95C3F2F74B7AB6B615E21DF348E3E0F76
-:1018F0000EF58F6A6FC33A15FFFC97CD1C2752393E
-:101900006E4865F2BB16E6E785F1FA1DA97F41FC3A
-:101910002FF4505061FA86DA4D21B09B565DDE748B
-:101920001C96A9D5646F35C437285FFE2DF4F3CB20
-:10193000F643C7D94F12862641BB941FFF8E8F678F
-:101940000BE7C76F717EFCF6E719D7D753191F272E
-:10195000C29F02870BFC4DF5FC23A94CCF7B9C5FFB
-:10196000CCBAF10FA90C77079DD7B86EDCFA05B495
-:101970004FF1C641685F4F2523E2DBE7F8F87F9C13
-:101980003A846F7F0CDF2DB5EB3F81EB10DE2838FA
-:10199000F91BC8938BE28D7699E30D25D69FEDA7B1
-:1019A000F88BE7D5DD6999179513B53F3E0EA94F22
-:1019B0001DC2214751AFEC6638A47EA8DFBEDE30E1
-:1019C000C8E1242EEFEF307DDCA0F6DC09FA594D9A
-:1019D00067F3A8A4337CF92A9FD7F7A494B8FECD67
-:1019E000AE687B5DC85F5B587B72F22CF67B204251
-:1019F000AF58256C47F887EBD3D977A29D45FC2AD1
-:101A000070AAB99D5FA40ED95FBFC071DD2FF60724
-:101A1000EBEF40BBFE285D23B17405FD62991743CF
-:101A20004F8EEB12E1B818FAFD078EA789B5334443
-:101A3000BF607C3D7BAB4B167CF2BBD411F8A39FFF
-:101A4000F3C7C5287F5CE4FC31908AF884CDC3EDF0
-:101A5000E38CFBCEFF90CAE8B39BD349CC97B9FF88
-:101A60000FF2F743F4F09C7C2616D7FAF3D356AD69
-:101A700006BF6593ECB3D0FBFF032FADAD0C008028
-:101A8000000000001F8B080000000000000BE57D37
-:101A90000B6014D5B9F0999DD9D94DB29B4C924D9C
-:101AA000B281246C20D858032E21C42841264F022D
-:101AB000448C88888ABA014C42802422B6B6D5CBA1
-:101AC0006242785A637D142DB60B420B16DB88A94F
-:101AD000A518700382F80EB68AD6DB1AC4F25084B9
-:101AE00005B55D5A5AEFF9BE73263BB3D905D4B696
-:101AF000B7F7FFE3ED3D9C33E7F9BDBFEF7C334B18
-:101B00000891482A215790FEBF1C13AD17F38A7C19
-:101B1000D42779F208991420AACF46C817F0373E87
-:101B200054C629022129842C946BE29431744079A3
-:101B30008BAB6604213DA57DF36B22F4BF2789F5AD
-:101B4000BF21635D798A8BF6F7D27658DF49FF2D86
-:101B5000127263438FE8D18DBBE1A3C373D408F342
-:101B60007C37C944085DAF75A67B9FAB804EE334DC
-:101B7000B9379281FD1E4C94B1DF84A13E2981F6D4
-:101B80007BFD1451D6D37E374E13541F3D57253F4E
-:101B90005702DF578E2261FF32A8C338B96F4EA4B7
-:101BA000735CC69F57B988DA49E7A95288BA3542AB
-:101BB000BFB17C9F136223CF73139F672261F384AD
-:101BC0003FBF95EF6B4269E4F157F2F967389FAE7A
-:101BD0004822B09F7566805FBE592D56E8B81551F2
-:101BE000F0902A95AA80AF180A3A733E21B7D0B177
-:101BF000263AC1AD80735A3E2C7A2AE1B98782C356
-:101C0000990F94E01D0478ADB0A913605E7BAC5AC7
-:101C100005E538499D08E54FCCEA242809F113521F
-:101C200048C8144E3F53AC36BF184FFF51643EDED8
-:101C300067656D5F0C85FF3F53397C092102F10B0D
-:101C40005F5C02759F08F35FE1DAF78E40FB5FA1EE
-:101C50008D3B2A858DCB500EC7F1BA88FB42F86CBC
-:101C600037FFD065330D3CA7566EB779AC0087536C
-:101C7000B19E5AD867AB73BDCD45E1FDB2A7D3EA9B
-:101C8000A6ED1F271084E3E93875369CBB753B69C8
-:101C9000E8A4ED629CD0D2A9835F8362C2F5E62AF4
-:101CA0000C6F6F48EA5C986F8A556D84725A16C53E
-:101CB000139DF7D6E4BE457AB8DFC1F1343F898D74
-:101CC000BF4566FDC2F739973F2F96046F1CECC9DC
-:101CD000B6EF4331027F4E827F51FE293EAA4C9FD0
-:101CE000E1A0385B2EBA4DB42EE70A11F9D41BE2FD
-:101CF000532FF2A98BF2A99DD2871C993E82BC7FFB
-:101D00004514BA1CC3F7590ECF238C1FC1E9B6DCAA
-:101D1000D123123ABE98F35B78BFBA2491F1B19BFC
-:101D200054459AE787A17DFF10F7ADB07DE79B6B27
-:101D30001E85FA4C657F45226D2EB9CF319D380046
-:101D40001E2662C946385941AE491C4E749B04EAAE
-:101D50000BADAC2EC5CE2709B4CC72FA568D04F863
-:101D6000B599DD2E5AFFE0E80722A174B6F1A1D3A0
-:101D700002A1F2627B8090E46C98478619E1CFF46F
-:101D80008530703EFACC2569EB51D05C7994A81669
-:101D90004ABF571605A69278C378F2059DCF16E87C
-:101DA000F50A803F2BF1C65D8A64FCBB9C549C15F0
-:101DB000E74BA3EBC279E4CF880FCEA33A3DD564BD
-:101DC00024218981BE1F3563BBCD3D01CF456CC049
-:101DD0006FA1732E44FED3F625DBFA9EB89FF6EF73
-:101DE000FE3CD67D2F9C3B50798CED8778EDC0D79B
-:101DF00062B51BE43B2116DC9F89FE077C362E482A
-:101E0000F79BCBF70B8B14E8F64F069EE761B1E624
-:101E100015C0C7AD56A2C6E7A37C7815F86198999E
-:101E200076A0706C57049F97F66B7F68CEF26C902B
-:101E3000D7AB25F77002744EB60994CEC7D275EFB2
-:101E4000A272472E223685D665273B7FFB7D8E7595
-:101E500071023C97C84CFA7C6CC07F46A0708877B2
-:101E6000D6552BF41C321F2F50C0C178C1A59099B4
-:101E7000F940B7BD2241F9E0447868FCA37E8308AD
-:101E800087ADA86A08D057B944BC56DA5F70B279FA
-:101E9000AF2401910C033C504540CB52E2C6F27E88
-:101EA000D1730CCE6395295EE9FEAD26AB6F890038
-:101EB000F8AB79B50AE15EAE1CCE0DC9B368720805
-:101EC00020775883ABF8F5E55EC5A2C87CF58F1086
-:101ED000DFFC03F98630BD3C6D28933B7BEC7D3302
-:101EE000F57CBF5C61F26939976B44627CB65056F1
-:101EF000CD89E7E0F3D55C1E8E4862F2B39544E6E7
-:101F0000E36712D9BCD3EEF5B50FA2F09B9224B8CB
-:101F1000410F576CA99506BB42FD06717D989CAA9E
-:101F20003A60DDD6EDEEA33E07681F19F57BFBBBDB
-:101F30006406CC5FCBE5E7DFF8BC6712D93E86F0DC
-:101F4000FA41C13E23125CB213FBE1929D08E7F413
-:101F500030B88871A3027EBA0E19CCD7310BB84EB7
-:101F6000CF50261F872719D719CAE51F95FB1727BA
-:101F7000A2DCF76540BF97CD6C7FE1EBBA43EBBACB
-:101F800071DDF96CDD4920E781FF5DFB5E10757640
-:101F9000D7A4808780DD033C6C2A0CC97BD9E51768
-:101FA0005B687B7114393F8E9F9FAE330EF6455AA6
-:101FB000181EFDA9EA9550A776C17858BF67A88278
-:101FC000F2F2F54126B29EF2656DFAD0EF83D8D4D5
-:101FD000E6F95522A3879EEC76E72C8A2F3940DC60
-:101FE00016A4F306947BC55CBEB46EF71078EE1DA4
-:101FF0004465A66EBC1C986525363CCA3FBED0FA27
-:10200000533E6A0F0C4DF044C08B56AE5ACC44116F
-:10201000712DC0710BF9B8F07EB68777C5C1FC2B66
-:10202000A1FF370899CAF1430F8CFB9BC479A735F0
-:10203000B03EAE8FF6DB9E3BDBB01F7C4EF9A83D79
-:10204000F78938B097BA33A91E0039F5928872B271
-:10205000DDCEF0D89E5E47F4F66899D32F1E8679C0
-:10206000CECE26D329FE8A9D1E72913DB4EFE2DCCE
-:102070003AAFE0C0F66763E83CDF4EBC08F12EE7FC
-:102080007948A50DE0D249EAE8F965C52FBA695942
-:102090001620FEF105D09FCA7981CDE7B2EBE7218A
-:1020A0009D308FECA6F400E3027EDCCFF6A3E7863A
-:1020B000A32DCF6490DF1A5F52BBEE5EC07FB97272
-:1020C0004D79229DBF714B76BE48E7AF74F6C8B319
-:1020D000F2506EB7029DFC2A456D4BFC5FB4E7667B
-:1020E000109F19F03E218BE981294D826F3D854F6C
-:1020F0007B989DF018E7C7B12179B716F9AB48B3C3
-:1021000013D4C713CF6D07AF83E7E7B0837F06CF44
-:1021100023D8C19B12991DBC19D6A376F09389CC04
-:102120000EFE39AEFF15E1768D42343BB40BE673FB
-:102130002472B9FA7B668F86EFFF1E7EFEE5F4AC53
-:10214000BD4097924F6274CEF8F40ACEA7938E5298
-:102150007EC91B48FFDD94FEBD94FE4E53BB49CCA7
-:102160008E4E4FFE0BE4CB928719DFB73A7721DF13
-:102170003DCFF9B39BAFDF9D2B56033E5F26A222D6
-:102180000A03E76BCFF43841AE87F39F7AD648CF86
-:10219000654EDFEA7CE09B7DB3DDB0AD707E946977
-:1021A000593722B4EFC3C0876374F2890852E5053A
-:1021B000F021CCE319017646A204FCD74AD8BADE56
-:1021C0007D22EA89687C44E9E624E0AF1F2E006C9A
-:1021D000DDFE29DD04804E289F9DFA3AF4B28AD3B1
-:1021E00007F543FE0AF3E4F27A6D14FF4248EAD79A
-:1021F0000F4212F0F74CA687B2135D4847B5C421D1
-:10220000837E51C5CC2C902F745E7312EDFF66C295
-:10221000B9E7B525F5F39F0DFA93BBD8BCAF809114
-:102220003D66E0BC1392A8FD11619E0CBEBF1BA3CE
-:10223000F80B399A7D92D76F9FA4C37A39C037744F
-:10224000FD1D29EA60A86B7C53CCED961705A35EB3
-:10225000BEA4DFDF677A2E8DDB2F644EFFBC390012
-:102260001F0D9E9A1D50CBE583364F2EE7BF614967
-:102270000A1BDFC0C63BA04EDB2BB9FF44E172292D
-:10228000C2DBCA9E9FCF2F7A4061718B3ABE2F2945
-:1022900051D1F41BC2B52A9ADFA584F43FAEE7669C
-:1022A000FD4770F8D07615DBABD93EC62A0CEFE1BE
-:1022B000F18368F8D1E0EFE4E723B96C7EE2ED87C3
-:1022C000DB64985FA39768707B3381C16D9206B71A
-:1022D000363E4F983C5825755A9508E7BC91D3ABCC
-:1022E000568FCB35CA8768F1943121F8D4221C0A65
-:1022F000D8BEA3C5572EE7FDAF4CEA875F038EB368
-:10230000B1FD3EC0E5356D9F87ED196CBE3B42EDDA
-:102310004DD8EE64FDA3F9FD7770FD3537A97FDC5C
-:102320009D38CEC1C685C713B4B299EF6F7E68DC05
-:10233000DD382E878D7386F0BE18DBAB58FBD78D4A
-:10234000BF39F9BADF0DC16515F2BDCACEFFB7843A
-:10235000FEF6EF637B315B379AFCF85B029B6F05FF
-:102360009FEF4AF08BE91C8941922B39C06B8A752B
-:102370004FA05DD282AA1FF447E967B20BE47485CF
-:1023800068F30A541E4B2E2BFAC9311251C1AFED1E
-:10239000F9FC5BCEBE3CACFB41AF2F8B29B182DF99
-:1023A000B93C5B72833E2C794062FEF57113CAFB27
-:1023B0004A713ECEB34BD1ECDCDB0D7EB44B715594
-:1023C000C7C03EAC227131FFBFFA2AFA7C3C97D7D6
-:1023D000BBACC926986F6C268B178C77D5A1BF4EE6
-:1023E000CE323F5AA5FF31F9ADA25E96F93829A346
-:1023F0008508581AFD6D99AC3E258E44BD8076D473
-:10240000D880D1FF965D9547607E99E8C6D175BBAF
-:1024100093EC0EB4A772C8F02F28FF58720562A182
-:10242000FE4585E4F1031E26BAEA94527A1E4B86D5
-:10243000C70A7238C7EC1F0CF184B60CD9ED05360B
-:102440007CA8DC9A0DFE5607F5CF110E6AD2352313
-:102450004278B214AB04E890E204F9ABBFB4B132F5
-:102460002599D1F1F1240BE2B382D7B5E7E1782FBA
-:102470004C8E65728458BD1FE6829C104802A5C32D
-:1024800005A42F0BE8312D9DE98F26535F2AD44FE9
-:102490009240AA8396AD1D525524FFE727DC2F5B9F
-:1024A000618A6C2FFDC43CF17D80830471834B31C4
-:1024B0002EE0B10C0BC50F347B558B2344B35BEF7F
-:1024C000176B8EC13C82E23F03FD07DABF5E76EEFA
-:1024D0000C26A7B552DB472D87CBE0642B9E6FE718
-:1024E000DD6564960BF1F439C7D3BECB002AD973EE
-:1024F00014C0D34BD98FE4405CCA9AFD9003F8B363
-:102500008A30FBB4C205B29890476D9EB3493AFB3E
-:1025100066624E2DDA4DC5592D684F2D8BE2977EA0
-:1025200047C38F4627368F39790CC4BF165A61BC12
-:10253000A4D4C442B93338154B6AF75AE0F9B20C47
-:10254000563F1F1EDEE37229DAFE27805E80784D3B
-:1025500046FF3952607EFADC2BE787CEA1DB5F7A3B
-:1025600072CAC0FD5993993ED2F625E570BACC35B2
-:10257000D25D4D32933397246BFEE205D3DDDB173A
-:102580004277E1E79D98BDA8EA6212DABF765EED78
-:10259000FCF4BCA3E13C15123BFF46C5A3C21414D6
-:1025A000CE05008701E7B246D6FBAE64D397E5A31C
-:1025B0004792865DF879BEC4BCD393BF049CF68C69
-:1025C000539D204FDA52287D523CB509ACD4FADB3A
-:1025D000397D3EC3CB2F2327867F89F39538851716
-:1025E000401F8EF71C2C8365CA8B4781DA017EACB5
-:1025F000073C94E63D20CDA2F5F6BB67A3FCDC3397
-:10260000AE05F7BDCC6EDCAF56A6707C1467A9C8CA
-:102610007F6D9CFF2A08F323B57ECFF37385F347C4
-:10262000F87CE17CFDA84DBD0BF69592CCF61FF22F
-:10263000FF7A45BDFF57CAF5D738EB1D86F8C73876
-:10264000EEFF2DFB6CA8CD4B0F7A9AEAB57F8AFF7F
-:1026500077863E013F29A3D4AAF7FFDAAC65D8BE3E
-:102660002C53ADBAD401FA5874DF4B107EE80F7AC0
-:102670000551D918C11F5C9629FBC7D3E71685FC05
-:1026800014F65746F525C45F2C8A4A2E1A31D02FEE
-:10269000DC652D23103739AD9067C11F3BDF7936DC
-:1026A000271BFD4209FC423E3FFA854A0BE9C378ED
-:1026B0004F1901BB06DA5D2340EEA8C463073D4213
-:1026C000FD429D7C3A6DBD03F93D7C3D2AB79E06D7
-:1026D0007CB5298C8FC3FD413999D9C19A9C0DA72E
-:1026E000870A27A39B18BA7533931BDB9323C8FB78
-:1026F0002F2F9FE694830B703D59B2075CB5EB8298
-:1027000001095C9E6F27337EAAB13DDD06CFB5F986
-:10271000C3F1434FAE423C1DEC1916BFA1F61AB5EA
-:10272000A3CCD45E5B2984D65FC6E11D0D1FCB40D0
-:102730005F47E0A303C9262E7FC2E3447718EF5F0B
-:10274000142F7114B2B83E89007F91DB49CB29BFA9
-:10275000C0FDCD32B3DBA9009D6616BFE3017F3E0D
-:1027600053C6FB0822B538AFB10F3CE772889F45CE
-:10277000D8DF9F939310AED60C93C13E23E41E8303
-:10278000FD18EDDC84EFCBCCCF25003C73F5F00CCD
-:102790003B77B982E706B31EE68D37B9899FF245CC
-:1027A0007C1671A3C08A37611C56E37385F3B92682
-:1027B0000F6C0A1B77B56318B3CF445B40A4E75F87
-:1027C000E5A0F6349DA755DD857A551B9FC0CF6FD8
-:1027D0001BC7E28D36BB5F5122C0E17ECEE7D1CE72
-:1027E000D9A14A89E5747FF72BCCFE96C6996A7CFD
-:1027F000188F62F15A85C34E2C29B082DD3E091C28
-:10280000F814D8CF56451FB712F97EE2EC743FE7B3
-:1028100090932BC2F61393DB570EFB97B2552551BD
-:10282000B7FF0A876607F4227F479BEF3E2EE763D8
-:1028300072DCA40EEC0D9BDB0FF75A316A5D218828
-:10284000C5D85C3799AD6B8F550B475B7474D891C5
-:102850002947BC8FF82F0793FF7649AD81717645E4
-:1028600022704F66E7F672B479A3EDE37CEBDDC42A
-:10287000CF3B603D5764BB62A883C90D69DCD61AA3
-:1028800090D36484448647D013290EC6A7F1729F63
-:102890000BFC754A8F9E48F3890E99C3FB5FC41FDA
-:1028A0009ADD5DD2B56F28DD6FAB4D720B20BF8A0C
-:1028B0008EF6BA74F0A17A7D9643173F106D1E9480
-:1028C0006FA28BDDBB575998BFBD679CF19EAC8151
-:1028D000C3EF7D5E46930BE31D9A3DF6AF39E79754
-:1028E000C55F05E04E07970E800B01FEFA415B6B5A
-:1028F000047949E1D3FE55E0B39AC3E5694ED7D1D7
-:10290000E033CA61FA97D241387CCEC7D7213EF373
-:10291000914311E0D86A97D3671BF8BF03ED904845
-:10292000FDEA74E78DC6871A7DDCC4F14205A42157
-:102930002E203BBCBDCCAFBCD3A8E7C4F96E2E9F04
-:10294000C9590AB744DE3FD146FC71F1A1F9E572DD
-:10295000633CE179078F0BC4901880CF69F754016D
-:10296000F2142CA699A394A1B04487007A2215E60C
-:102970001949C8035C7E86EBC11495F9C983498B5C
-:10298000C0F44A06EECFC1F711AE07D3A95F03F139
-:10299000183822F8D38369DD0A360851F11E5CF03D
-:1029A0009AD05F76129F00F367903E2C87402A02F0
-:1029B0009D3F9BF40A39147F0F54D48D02F9FD0E0C
-:1029C0009CE392D039CE678F6AA5667FACFE37C193
-:1029D000FB93B07DFE1F82F792321DBCE51423DD10
-:1029E0007C597837707887C7F38A219E970DF13C20
-:1029F000FF6EE053F92CB33F7AFE2E637CAF2D9B24
-:102A0000C5F32AC4EA35780FEA92D1FD9072FB56DD
-:102A1000419E936677A2CE1B168AFB594FFD4082DA
-:102A2000380A918E229CF06EC885F22C3B05E53168
-:102A3000B323C6F3FDCBD973AC70EF1DF29FFC221C
-:102A4000B33798BD24733A287696A2FFD276F6DC87
-:102A500076C785FA493BA53D787FADF947AD8159E9
-:102A6000E82F858FF34BFEF7E0FCFE80EC827C9331
-:102A70006E7E2FD67D6AAF214E1BEE076976D57824
-:102A8000BEFFB28067DFA570BFA5CC222CBEC9E017
-:102A900020F375DA9CA7F11EFCF9B326F4B74E7348
-:102AA0007FAB18FC2C3BF377EAEC03CF794DCA459A
-:102AB0008638BCE63FC138C8AB2B53FC22D8739A8A
-:102AC000FF04ED2EFB40FFA9CA127805F637E51585
-:102AD00011F342A2C137DC6F0AD73F335398FEF996
-:102AE000560A8F1784C1538BF785DF4BB76BFC27D2
-:102AF00079053DFF87AF2FEF9A88FB278A2E1E3B73
-:102B000034144F14542FB92B3F143F8C10376C01E1
-:102B10003AD4E2869A1ED3E8D842FB5AF19E397223
-:102B20003CB13B7BEF30E617BE900CFC59A1B0B82E
-:102B300091B63FEA17DE93A2C3477180E96DCB7F60
-:102B4000B5F42DA1F02549C4CDFC83169795D62B5D
-:102B50001592BC12F9CC86795AC50E01F94EF2C70E
-:102B600060BDF2B8DB1743EB965D2F89A203D69BBD
-:102B700045628410FD68791D6D810F5601FE4E1F60
-:102B800097DCE7F2BB2B218866F0936243F844F9A7
-:102B90009664A83F22791E4D413B6150689C08F91C
-:102BA00060430DF967CF48EA63D06FBA55FD11F65F
-:102BB000FFCFC3FB2F53305EBCF72BE13DB40ED3E8
-:102BC0000760B39174DD7A36DA7839ACE342FAEF14
-:102BD0008F4B2F22781FB309700671964F880FE232
-:102BE0002CCF995F14411FB5F379AE201D2E7918B3
-:102BF000DB2FF4DBBCD1B90EE8E2AD946C9CEF396D
-:102C00009B67F528DABE6F83340AE236ADAE67AC57
-:102C1000903FBB6B637B469F8EFFF66DF60C89E49D
-:102C20001F6A25FD4B3015E1B9E259A98A2627B65E
-:102C30008B501F609F6DE852609DCD1BAD3322C548
-:102C400035E454C6EF576C60766D55AEC90DE2ADF4
-:102C50009878A524B88F7113B79F36C48DD8DA5BE6
-:102C60000ABA285BC47B0D5ADF1D4FEB716354F425
-:102C70000F2E1EB115C75FFC49A99BE5517A6DF96E
-:102C8000B4BE2AB774CC4A5A1F12EB39067C45F5FC
-:102C90004C8784FAB4330EF200E2464C4D59496B2E
-:102CA0007102A98964E7FE3D85D9799BCD1A5C251F
-:102CB000CC83DCB55146FEDA972EE2FD1385DB7C32
-:102CC000A8FF393D8E504A24E5AAB71CE058413A86
-:102CD0005BC19F2A775DF3423CF90AF02BD8AA002A
-:102CE000FFAF8A6287BFC5F7874284D2CFDE0D6D02
-:102CF00037920879D4FD79D671AA2515EE57F8BD1B
-:102D00002E714E45FA898EEF7B99BFD9E96F8DA55B
-:102D100070BC624BC720FDFCEF42D0356520BE2160
-:102D2000FF995C0AF9B71ECCA76D3D6A42F8BD9CBD
-:102D300027F8040A9FBDB922B5D9E8AE72ACBEE14E
-:102D4000B4BE9AD371F596FD6D8380E5531DB8EE40
-:102D5000CBB94F58597EEB85C7AF47533E6884FBCC
-:102D6000648A8F094AACCF45F1350FA6A0F5718A68
-:102D7000D5E7A7EBF5D87BCB12E812CFA508EEF587
-:102D8000402FB94401F9812E8889214AA175101973
-:102D9000484F0E82F95CAB0AF3D6435C6C6586AB98
-:102DA00013F20D778CB062BE59783EF10EA1E58525
-:102DB00044884B250A28AFF7E6BE89F7747B332C8D
-:102DC00004E815137EE9F3B624C6A7710546FBB3E4
-:102DD0002A359BFB9FC46B290CED2B2EC7AAC6502E
-:102DE000427A31918DDF9723F880DEF6B9B87CA066
-:102DF000E7DD080691D4214D1F111DAF2F0D9FE077
-:102E0000D2EC62413BA769E0399E137CCB87C23983
-:102E10002EA6E7A0757BAE80EBDB9595B7132C8BC8
-:102E2000EAE11E337CFFF7A632FF50A664970BF24F
-:102E3000AD73F9447D7E8C5C74FB145B3CE631A180
-:102E40005D99962BE079261E65F7B903F2B315E27A
-:102E5000910DF8A156476A68BEB8CF9EFD36E4FFD3
-:102E60004E2E12FC31B01F9EDF4CFFAF07F48B9C3F
-:102E700053CBF2AF73D7E179261599DD709733C93B
-:102E8000E6EB28A5F5978E4918CF9E9C3301F3AB4E
-:102E9000C3D75FA9107F1585EF4B7912C23BE6A21D
-:102EA00027709ED7F34C286F26433E36E42FEBF372
-:102EB000AA511F1AF3B9278BFFAD9640B39BF12B94
-:102EC00091BC8340BE4F711AE1673F6ABC2FAE2EA2
-:102ED000B018EA93F3E4303DEC457A793193D1C5EB
-:102EE0008B170BBEF5D9213A9B7434C90774067F42
-:102EF00062A1018E8673C6056415E0B7EFE29F3DBF
-:102F000008F72471AE65B7E33D3887BF4627711CCB
-:102F1000EFF68C5F7F1BF49406FF703AB870FC5F8D
-:102F2000535302F82FD0EEEFC3F01F866F8C416A27
-:102F3000E7183610EFB87EF6407C6B7430E0DCF7B3
-:102F4000752D1F4AF1FAB29D3E003CAF937DF70A02
-:102F5000213C9D17AF392548372B950E1BC8FD988E
-:102F60008B0ED9C03FD0E88288DD057A7BFF9F8534
-:102F7000EFD2D5027326DD820FE27A6FC0A3CB4376
-:102F8000EBBC98DA9FD7F5622AD855352C8FA3551C
-:102F9000CD67EF5D15307D1A2E1FFE902AE2B81E18
-:102FA000F38B19E7CA53ADB67908DC8FB542BE1D65
-:102FB0003D9FBCBA16DE6820F2B45A949764B5C03F
-:102FC000F2108A7F8BF27D8ED3B75488B01E5A32AE
-:102FD000B84F17937BC5C9D89FCCD0F2926ADEC791
-:102FE000FD4F63F50BDDD76BFFA47DFD9ED20A8BF1
-:102FF0007731BBF96A1E97D7ECEE2936967738A55C
-:1030000058447CBCBE41F0617E24EDE7A574D2C873
-:10301000C9F66A6E079E2E7AA67D940BEC41D560A8
-:10302000770AC53D68F7251419FDC14435D680FFE0
-:10303000E4AA24433DA56690A17FDA8CA1C6B8829C
-:10304000E79B86E7831BF20DF5CC962B0CFD87DC06
-:10305000556AA8677B2719FA0F5B3ED5501FDE71B2
-:10306000A3A1FF37D6CC323CBFD8D768787EC9A69B
-:103070008586FA88CEEF1AFA5FBAED5EC3F351FE89
-:103080009586E7A3F7FDC0501FD3FB98A1FF65EF1E
-:10309000AC373CBFBCEF49C3F3B147B71AEAE30210
-:1030A000DB0DFDC7077719EA25E41543FF32EB6F07
-:1030B0000DF50AE53D43FF09CE4386E7135D1F1B6F
-:1030C0009E6B743039F75343FB55EEBF85BDA75354
-:1030D000C3E21C100F18068F3AB08C259DEC5E875A
-:1030E000F462F960A1A73C0DE8F3C7DE7648486AB0
-:1030F000F506FE0857D3AF170D4B60F6934AF4F26E
-:1031000053CB4FA57E8B378692427C90D2ED684A96
-:103110007741014B2548256B32C47B62B04C0A26AF
-:10312000637B7230114B477030B6A704D3B14C0D9E
-:103130000EC3322D988DA533780996E9C18BB11C49
-:10314000141C8DE30607476199111C8BED99C1CBC7
-:10315000B1CC0A9661FB90600996AEE0642CB38313
-:1031600013B11C1ABC16FB0D0B5E83654EF0266C6A
-:103170001F1EBC01CB8B82B3B1FC46B016CBDCE08A
-:103180003C2C2F0ECEC5F29BC13B70DC25C1DBB1C0
-:10319000CC0B7E0FDB4704BF83E5C8602B969706F8
-:1031A0009760E90EAEC27EA3822BB0CC0F3E88EDB5
-:1031B000A3830F605910FC11B68F093E8A6561F038
-:1031C000092C2F0BAEC3B228F8732C2F0F6EC6F24A
-:1031D0008AE033386E6CF0692C8B83CF61FBB8E0EA
-:1031E0006FB0BC32B81BDBC7077BB05483AF607BCA
-:1031F00049F0252C4B83BFC5F6B2E07E2CCB83EF84
-:10320000617B45F05D2C2B8387B09C103C88655515
-:10321000F0632C27068F613929F8298E9B1C3C8589
-:103220006575F06FD87E55F00C96FDF22E6ABEB231
-:10323000C784FE2CF753A3FB0B5E949766FE5E1CBF
-:10324000E45663FE7F8BE0C378A1A3EF05A89B8BB8
-:103250002C182FBC9904F03D813F903E3BC8D39E73
-:10326000CB8F6440BCE9F5147FA63EDFC1CCE30000
-:1032700015E27109FCD5298E5D29A04F6FA6CD906E
-:103280006744D42F300F720ACF83BC59A20E16DDCB
-:10329000EA7E98E172ECE7B7D0FACC6AA2E6D3FEF8
-:1032A000ED975B30AEDF9E4FFD205ADE97CDF26585
-:1032B000BBD298BE7C2A8DF9A5CFA531FFEAC942C1
-:1032C00096C733F3F6E18C9FCA93CFE33731387C4E
-:1032D0006324CFB3B505B2303FF602C79D48E57908
-:1032E000B5BCFF836935CFA7D1766F29C96DB1858C
-:1032F000FAD1F65D51DAF7803C086FDF6562F8F0CD
-:10330000BE2D723FA12661EA39FC84D717F77EF300
-:1033100085E1A1FA1B51FC504296B0FBC35DC7AAE0
-:10332000AFA7FAF0EA22D14D2507F9EFC5DBC67D3C
-:10333000389CAD0BF999DE5211E317338BF7EF4947
-:10334000A6F5998B1231EFBE7F5FA5667C3EC5F96D
-:10335000F6375FA047BFB9E537E33E34C4453D6863
-:1033600077DDC16994A8E6BFF669CF915E59DCF7B5
-:103370000E58DC05F2CF8CF3F6AA66DFB9F263884B
-:103380006A21AA81EE19BC56C1FEC1F7275613ACBB
-:103390001BCFFB50B8A2DEF7C6CBBE56019C7757B9
-:1033A00002D05D5C5E809C2BBE0CF0943051A1CFAE
-:1033B00006764C3478A63819FD2514AB4E2FC54F30
-:1033C000DBDF45BCE7DA9D58A800FD7FDF9693065A
-:1033D000FCE174327A6DEB7917E35B090501E2B524
-:1033E000B1FB739705E2F8562C972E7663D9B6B8E1
-:1033F00008CB95193FB042BC444C91201398C4644B
-:10340000CEC17890B6BE397196B5C44DE75B63A95D
-:103410008610920871066A2224D2FA12EA539C4D51
-:103420006374FDBAF3431BF0C3D93417D64513BBFD
-:10343000378E2BF0AB909710E7564A2557A81DFF03
-:103440001CD8BE1EFC91D749DFEA6B018E2A7B1F78
-:10345000A395BF6FDA5A329CC3551B1786F7303CD1
-:103460008BB21BEFADC558DA3F2F3A5EF39C2C2F81
-:1034700001E84BA2F4F529DF3751E34C309F86DF9A
-:10348000D35200F3A95A85C87997851ADC155539A6
-:10349000D73D0A51A4BFEAE5A92D6F5B183DDB506B
-:1034A000BE621DF2B9B8BCDA9BA6163BE9FC8BAE36
-:1034B000E472202309E5006D9F7E056DDF66627E64
-:1034C0008A3749467EA14048803C5F6275254C3D65
-:1034D000471EC4B2C58A2A99E17EC09500F05AC63B
-:1034E000F3F5E00D65BD1CF857F50BC90B1F9E2BBE
-:1034F000BCFF3613E7ABD8183C97C8E1A18D9BEF12
-:10350000E4F238BBA6D689F1115706C8555A9FED8B
-:103510001C83E7CF00BEA2F5DBB0AEF4D7EBB1BFA2
-:1035200093F5C7449A0B90C3745C138E93FAE769C2
-:10353000C1BAAD7FDD85B88EA3BFBE08EB19ACFF65
-:1035400085AEA395FDE77F93C9C9CF24352189C2F4
-:10355000A7E6AED935E5546F5F7BD75C2C3F58DCCE
-:10356000AB825C3D4CE5491B856B4DC93007F83992
-:10357000D75E35CCE6D2D16B3D8F6BEE5A6EAE0284
-:103580007D57BA42ACD980FCB4C49037B7CA69E65B
-:10359000FE0DDB471DE5F1BB29C9D5AFD9FFCD36FF
-:1035A0009D3D3A8BB865A0F7D9CBCD21BA263AFE1E
-:1035B0005458DB3693E7FB37C039568AFCBE82F39A
-:1035C0006B22E1FEBC2BB5E61C7A872CB7104F04AA
-:1035D000793C103E84FC95F2C167B61C8CCB524BF3
-:1035E000CD1A695E0D4ED1D6AB8F12FFD5E0A4C1C6
-:1035F0005B6B3FB47AB4C2EC6A9F018EB3EF1B835E
-:10360000F1CA7A1EAF278956CE9FAC5F1D5D672B2E
-:103610008C935417D03BD423C9176DDD3AFAAFBB56
-:10362000F323C197C361A599E9F130F81E5E333CDD
-:103630001EF45038FE2E14CECD1682EF530436DA27
-:10364000591CC93103E76FE0EB13C74CDC4F035F34
-:10365000EF859D717E13ED5FBAD1BE1EFCE093A590
-:10366000DE476A403EAD37633EDBBD3B57BDFD23C1
-:1036700078EF639D19EF4CE6C63D5C08F7B1A7B83B
-:103680009EA30AA007BE9FE021DA9F2AC0FCF58412
-:10369000CD7F52BBFFD89880F03C5ABEA17D2C2D27
-:1036A000FB762CA886B8CB919D57ED05BF796E2C83
-:1036B00091D231BEAFC8C87F5EF38746FB400AD5C2
-:1036C000C581F57AA8EBE247737DE60FF5743E6F8E
-:1036D00093B1AE8797490F2F57B9115EAE0A03BC5D
-:1036E00084E7ED7E5107AFF298E10ED0EBEF3A5D43
-:1036F000088F8698A5A9009F861D2BB09CB729C668
-:10370000FBA16EDD059D89867AF3B674AF5EAF9C32
-:10371000DEF7443CD0E142A7E8FD90EAB9E38BD55F
-:1037200056B0634E2CAEC252C3FF82CE6CAFCD30CA
-:103730008FB17EBA43A862F2D99530ED1CFCBAD0A5
-:1037400029E33A1F6D62FEE6478BAD5E58E7F862EB
-:10375000C5CBD6757A991DC5E035FFAE38EF87A386
-:1037600043FB8B36EF3F7B7FD4C22787AC04DFD986
-:10377000F9E21C7A3BAA5C923E93517F749BFF0C4A
-:103780007463A5FFFB02E3A812D6B5799B3B452FD6
-:10379000E41313B2C5B01E1DE73AACE3B7E87AC133
-:1037A000F89D8971100B43F9CCEE413C700F42E754
-:1037B0003B29D996431C41BB0769868568DF05D63E
-:1037C0003ED9439B3EE91A76CEF7CC299EB2412FD3
-:1037D00037583B6450B60D9D1797033F7DD2D59A5D
-:1037E0000AF2639E78FA5B91DEF7BA3E9DDFCFFB6B
-:1037F000CC01A3BFE8D3F6992D19F88CD8FACF4D98
-:10380000EBC7A3BCDF53CBE76DDAB2BF722CDD7F11
-:10381000D3B65332EC232DDD539B9E123ABFC0EF3B
-:10382000811A371D94E17C47CDDE8BBE772EFB7E5F
-:10383000C03E6D4E43DEA197F4027FCE2A221AC30A
-:103840005EFF1E9537C75E3113B83F2467692FFAB4
-:103850003C8B3F9D436AE2015EB3BAE6A1FC39F6B8
-:10386000ECE4BD2CFFA8A310E8E31362C2F7DC3F31
-:10387000216FC68FD6C16F75BA963FC9BE6FA3E5DB
-:10388000B7D00DA6637E7A437B2FBC376621929713
-:10389000CB25817DAFC627A03C6B60ED5E625D826B
-:1038A000E758CEE49197FE07F5DB3A8CF2A97E8DBE
-:1038B000B15E47A6A6427E77DD4366C8202273F537
-:1038C000F28FC2EF8E7466D7D7939676B0E71E97C5
-:1038D000595EF72C854883A91E5AF0EBC70B6B691C
-:1038E000FDC17476BFF311F733E0BDC774FABCF1C4
-:1038F0002E9FACE60D3CDFA1AED1D3C7129C8FE961
-:10390000AD46CD6E252E88E30F867F0D8D7EFEC1E0
-:103910005D22DE3B0D86769D7C9EBDDC78BEF39DF0
-:103920003FFCBC84FC00CFDBB8E91AF4DBB4F368DD
-:10393000F8D2CE63DE14F93DDF27D30583DDB49DD5
-:10394000C34FF3BB9F0FABBF10567F299DD9F72103
-:103950003F9DD1B799F337A5FBE781EE1758039543
-:103960008C4EFA64FD7DA81CEAF7C2B9FA5938BF3B
-:10397000D07E2FA58F89DE2F2634DFEB91E65BF01A
-:10398000EBA79E057FB4F1970FC7C365D031A9237C
-:1039900015DEB398BF71693CC0E9A8E48D07BA3958
-:1039A000E613AB22C14B1AC4E506516D02C57B93E9
-:1039B00046FFC54BA6807EFFF346B3027E61F32629
-:1039C0008B1FBEBFD4D43517EF6B68FD20AB2FC360
-:1039D000F72A9BB7993FD0E3B5F1670FA7627E073F
-:1039E000F10E66F7E9FEC1F0E9A0A60D7FAA043F3B
-:1039F000B99904909EC3C7C1FAC12494D7B572C2C5
-:103A0000C0E75ADCB4993591E6AE55A7206EDADCF2
-:103A100035F108F07D33913ED0D35303D034F557C0
-:103A20003E4FE779779791CB40BE68F020BE149463
-:103A3000CFAD9B7F38F220DDCFF10DAFC40B7A7F85
-:103A400095DFB79FEE9CFD7EF239F4C3094AA7FAD1
-:103A5000F73134B9EBDA46379046ABDDAC9C6FF604
-:103A6000C78FA5709DBFCE8CEF87CE7FEA899F3E22
-:103A7000067944EF5AF0FE63DE537BDEBE82D6E762
-:103A80003D6D7654B363D8E03E58C34B33FD1FDC25
-:103A90004F6878687C668F0CEFCF403BF8071A3E82
-:103AA000E63DDD23931103E157D6D923F7D922E070
-:103AB000A5F36025BE67B4F92F32E0FDD84E81A48E
-:103AC000650F1CDFB06E0FDA310027C423C7533FE8
-:103AD000DE06E0CB3F657B01F653406E9F0F5F072C
-:103AE00040AFA6205DFF623BDD47C3EF2D6E8043F4
-:103AF000C32FEE8887F31C915A187D3FBE3415F210
-:103B0000DC1ACCDE54054BD6DEF0E33B91EEEAF74F
-:103B1000DF99CAF20ED5749EDF910EE7BC6DED758C
-:103B200078CE3AE241FA6B785CAC813C98CF255272
-:103B3000F57404FEB89BF3C791F514B9F49C4740A3
-:103B40005E3A42FE8EF65EF39DFD7110760FF939F6
-:103B5000BF879C3A48CB5B67F2B79F6E372C43B95F
-:103B6000FA51A69A06F793140E9A1C45F92AEEAF5D
-:103B700048637862F218C751FA2B8376E8DF6BC688
-:103B80007B61DD382E3FD9FA8BF8FA74DFB1608F94
-:103B90001C498DFC3ED0A67EFEA7FA5647673A3EEA
-:103BA000677CBF6105E3738DEF7DD754C1F3CF7E92
-:103BB000C7F808C6813EA2FBF2A7E1F39E6902CADC
-:103BC000050BF147E2EF0D66CEDFC6E7D462477B17
-:103BD0004EA313BA7F09BE4716A217BA4E12E201CE
-:103BE000ED95BA87E8789D9DDD0CEB623F39D49E58
-:103BF0001DE2E37A2E0FBE3DC8280FC8DA940B8A67
-:103C00000BCC37FB7EFA18F02FE557AF0BF8D78CAB
-:103C1000EFDD7CBC65F7DB37523AFFB853E35BA3BB
-:103C20003C0DE7DB86AD77627C309C6F3FCE682130
-:103C300011F93683BF3717CEB7197DFF5679AAC160
-:103C4000EF2761F0A3F2F127DB5DD1E1182E1FC74A
-:103C50000E72213CC3E523FDFB1D291C48871AFD7C
-:103C60006974D7F8F30543400EF5D3A7467FFDF4FA
-:103C7000A9D15FF8798DF01B20DF20D949673F98E3
-:103C8000EF255E3BC577608788DF4B3AE90AC4437E
-:103C9000FC67690CB915ECF0930AAF27B27A20459E
-:103CA0006E0739A1B5076258BCF2644D203E5167DA
-:103CB0005F1FEC16E321BEDBE78BFC7D37CC48A40D
-:103CC000EBF745F9FE9B168F38191B3F12D78BCDAA
-:103CD000F201BE2A445BD65D9037DA21E2777CE6BA
-:103CE0002CB93E1EF2434E760FBB7A066DBFED2512
-:103CF000FE193FAF2AA55338CFE6783F4ABC8F1450
-:103D0000D3F3CDEE66F6F39CD591E944BB37AFB360
-:103D10002D92411E51BB35441F049EB3EF2C34AC91
-:103D20000D6BEF9E8CF4D418464F1EEE1F1D1BC466
-:103D3000F3FB479151DC3F31E9F3412AC4BCABE1CD
-:103D4000BB9C27F789986F7DBA5B24ED70CE2D82DE
-:103D50008F007F7B53902E9BA8FCD0C77F8F03DD05
-:103D60009DE33DBAE3BFFA43E1F76897F9CFBE3769
-:103D7000F247B43CFEECBB173D07F55F1FC87A8FD6
-:103D80000CEC5FB6F3CC2D20FF4FEEB4108CABECF7
-:103D90007C31EB7B50DF6EC1BCA393F75A54B4A7C0
-:103DA00077DA318FEE64268BA7B6EEF8CB48CCDB02
-:103DB000266D8837C760E6779CEEFEDB1FF1FDDAE3
-:103DC0006E7A2AD0B73BE3D01E6FDE1EE30327F5E1
-:103DD000E48EBF14EAEF2FBEEE799A6416BF3F69F6
-:103DE000273320EE753291C5AD9B9FBBFC892574AE
-:103DF000FD055D3D32BCB753F6FCDF4782BC39B9E7
-:103E000095D91127CC7D3F266E42860CBEE73E3306
-:103E1000C5D709B0ED28AF3C3778E755DEBC487010
-:103E200061703849E100E7A270690039190D1E85FB
-:103E3000FFB1F038750BAC3FBFFB32BC7F08C1450A
-:103E40005059BBDD6715F0FCAC7DE75F46823CFE58
-:103E5000B87309EAF7F39DFBBAFFE7CE2DF82FE41C
-:103E6000DC8BFE63CFCDE8FFAFA09FC60CE483815F
-:103E700074FEEB6F61FD177637EEF702F9FF21381C
-:103E80007FCA7FE2F9BF22DEB70A98BF723EBC3F0D
-:103E9000F31F7BEEF3E1FD258E77BB0279122777C6
-:103EA000FC3D8BE8CE7FBE73BFF97F94DE353BA827
-:103EB000D7D4A214D0FDBD4B3AAECBA6E51BEAA7E2
-:103EC0000E705B2D51EE694C19CCAFB0082CEF9BF6
-:103ED0005C2768F1A55E43DE534603DA1B53D4FB2F
-:103EE000D8F799A4965EC83BED2D9DED5E893DF215
-:103EF000F17B02BDD3C6F1BAD1DF7A5D20AA40EDD5
-:103F0000DB29A593F781BD77B52AA23D484BB403C1
-:103F1000DFCAAA64ED45463FE38630FFE0FA19C6E2
-:103F2000E7D7F1F9A693854A0185D7F40C49F151F9
-:103F300010DD50D26286F3DC70B3403A74F1CDEB01
-:103F4000C2E6FB2304D07476E497855F413FFC16FC
-:103F5000223C4889766F771EF81106EFDE69A35878
-:103F60007EB1E466F09BBEC08D7153EE879AF978FE
-:103F7000B36D792FF0AD9918FD4FCD8F8C0667C2C8
-:103F8000FD529C676808EE665544BF54371FC24314
-:103F9000C3C797C58386BFAF8B0F398318EE75B53E
-:103FA00072AEB5761EDC435821DF9DCE7BF56AF6F6
-:103FB000FE88354F4038D61499F1FDAD3F996A0A15
-:103FC000C170AE1E7D59D377D9B46E80CF5C0EC759
-:103FD0003AD282762739FBC517C58578FB8776EB01
-:103FE0005C9590ABA85F52572CF863E9F9EB25E29A
-:103FF0004DC88738A8403ED0C7417DC63AFC5D9980
-:104000001A9AE77CFDA3C9877F76F93E95471F5032
-:10401000A41F8412F366D8EF5D68FEE3ADDD0C8E5D
-:10402000CDF305DF50A423BF597FFFBB3983C5679C
-:10403000DFBF7B34CAB992FB472430BFB600F379A7
-:104040009AB9BD7FDAEB4A8078CEE9EE610910AF0C
-:1040500039BDAF2C3E521ECF7EEE57FE76B115CB4A
-:1040600093E542879880EF9D4C413D5C1E4340EEB6
-:10407000848F5B91A1C5655AD8BD246179F875FC20
-:104080001CF5746842920E6FABAF3A268D1C880700
-:10409000F8FB4077AFF275E10B7E2CC0757F4C5F6B
-:1040A00065A4EF13FE88CB85EA5D6764881F4CED3D
-:1040B000CEC6EF4B4E2D37BE07F86006F7CF4793BD
-:1040C000D1B0AFEA5D13E32F07BCEC13DD3114BEB2
-:1040D000CDDDA7644F84FBB97078C2FC10473E6405
-:1040E00076D7013C0FDD1783EFFFBFC6EF8BF2F8E9
-:1040F0007721E1D341103FDBC0E17A2683C5D1AF00
-:10410000AD2E31A7D075F3BA945190573688F73F4A
-:1041100093E1C2E783F938ADDFA0F9ACDF4159691B
-:104120008A74FE21598C7EEA89FB5B45C27F1EDEC4
-:104130004AEEB7FBE1BDB8D3E5027F6F269CAE091E
-:10414000F2C7E92AC107FA17FC58AC570BA8FF5F62
-:10415000D3F2EEA6327DA9D17D389CF767980C7911
-:104160000EA738DCDFE6F4A1C159836FF87EB5FEF7
-:10417000545E8DD7C75BAEDE36EA17609F34750B91
-:104180008A894ED524F5C9C087CDDB1E30C3FDC258
-:104190000DFCF759885433527FBF7B2683FDCECB6D
-:1041A000EEFCB1683F7EBA9AD9C7EA9C53F160072A
-:1041B000BD6672BF3116F8F175D1F05DF3F0F2BD56
-:1041C000C54A63B9593F6F36EEF3DAF92566080F31
-:1041D000DD34BFC79CA6A3A73319EC7B415AFBA0D3
-:1041E000F92ECC5FA4EBE13EBCDFB710C8C7C8EB2B
-:1041F000EC2D8DA3CF6F6A496474D8D0D923639D09
-:104200007D67585B4F5B279C9FA655C719EAB3CBC8
-:10421000FA32002ED516FF2277043A7D2853BB8749
-:10422000FA927A42A5743BF2FF073D71AA32D27727
-:1042300050676732FAD5E987B448FA61E112571A34
-:10424000C07FE18E6169C01C0B5FAA488DA41FDE90
-:104250005ACCEE0F0FF0BCCB93D3A87EB854A71F57
-:10426000A6C5207D848FBB2AF302F58386AF7FB37A
-:104270009C790BF44304BEF6641AF5C3F4EE5AD4E9
-:104280000FD3A789C4A58BC75D9F793EFD50927A55
-:1042900003D6CDEEB80874F316F74B00AE50C23A11
-:1042A000A027EECF64723F5C5F4493E7395902BFA9
-:1042B000DF3E8F3CFF5F82B326CF175EC7DEE31F72
-:1042C000488704E5F5C21B04FCFD92853B983C5FE2
-:1042D00078338F4B86C9D71A90AF057AF9CAC6379B
-:1042E00079983E68DE96FDC399F4F98D1D66B79501
-:1042F000F6BF31246F0BF5F2F6FE4C49837396122C
-:1043000001BF3366C61197515EE5809C3A34EAC519
-:10431000BC6780EE5F63EF99FD89EBF15747BD58AD
-:1043200000F1F4C37CDE67B9FC3AB1983496533897
-:1043300094CD61F6F0822D22C2A1A98BD9794D9B33
-:10434000047C9FB732FF0CDE1BCEDBC1EE0DE17BA0
-:10435000BE253A3CCE7BADAF7D303C5F27E0BD67EC
-:104360009D7B1E7BEF6F0D8B135BE97F902FB1223E
-:10437000367E3DC13C1D15E3CD0B38DCAA2D81BD39
-:1043800030BEFA67827B1DCA35637C7A41CEA46356
-:10439000E01FCCDB14D6EE5E81F7190B20EEACF3F8
-:1043A00047DEE2E7BB4DF4E73D0379816F88117F7B
-:1043B000EFECAD7038347C4D38ECA77028F8EA701B
-:1043C00068EE7E00F36FBEEEF90F64F2787B3E2953
-:1043D000007EF9934945FEF7BE2CE27BC5731E189B
-:1043E0009EA6CF53FA1387C36B264F7B3AF46B62BA
-:1043F000EF1FD7AF7D7A0FBC1A3EB3938C82B07D8E
-:10440000FD1AA39EECD7CB5D2ED4BB335B9E16E08A
-:104410007BFEB789047F076C76BEC503F7AFFB63ED
-:104420000228CF343A4CC892D877DCB8BD776850B0
-:10443000A01CFD8A6D82827C02DFD3803AC5037C9A
-:104440004F63F7E57FA9E470C7F84CF33686A7669B
-:104450008A17E0B34A6AEF821EB989EA1DBC2FEBC6
-:10446000EE3143FF06DA2F19E58E1BFD5D4D3FC18E
-:10447000FD5D49AA0E6F3B0E32FADD28B84904BC37
-:10448000E5D2FFCE85B768F8D2EC870BC59B068FC7
-:10449000842C23FEF6C7F4568FC67B2AF63B40A435
-:1044A0003B11EF553EEC188678CCE472369CBEC1C9
-:1044B000DE77E9E24BD7C0C6F1C3F531982787EB29
-:1044C0000E65F6905EBE84FBD1CDA417ED9AB47450
-:1044D000CF5319BABCB0E93C7FA5FF5E37D4AF3EDD
-:1044E000734CF47EC4598AF73F5A7E2DFC7214E651
-:1044F00083F1FAEECCC20333E9793F5D2EE2FBC9CA
-:10450000D79B5C6F17031FAF3413A0CB4F5F35AB46
-:10451000CC0E8D43395CFBDA213384466A21BF809F
-:10452000F6ABBD87C9DB4330196DFB3DD5632A7CF3
-:10453000B784748E81BCFD69EE9E0AC8DBBEAE6096
-:10454000FF52B8A7BBB64C79FB6D80EF0A91007C97
-:104550003F585E86FECA1DB70B48D7EF2CC6DFC298
-:1045600022D74DCB7EFB6DBAEECDCB53F09E6DA620
-:10457000BAA702E86DF6D5761BDCD34DCE15894778
-:1045800007C79B49EF5290DF335B6EBF0EF6DB40EF
-:10459000F502C45D1BBAF757A4417DAD80BFA3D619
-:1045A000ECF5C8F00A54EF9A5332C43FEA683F4032
-:1045B0004FF35AD6AF798380EFF7D451F900E7ABC8
-:1045C000DB20107891A497DA7F5636AF0F3ECCD41B
-:1045D000BB968EA7F57A180FF36E48C4DFBB6B7ECF
-:1045E00095BD1F5457B4642FC8A73A3A8E3E26BDD6
-:1045F0001B6EC7F9E6AE1508A4063714657FBF0821
-:10460000E67BD58CDF0539D0F3A80CFBBE85AE97D1
-:104610004EE79F2DF655609EF5F70405F3A0ABBF5E
-:104620008B783BC9F980647C87F199C0EBDC2ED490
-:10463000F4E3C6ACA12CCFFAAE25ED70AE3E6F4AC6
-:1046400036B844CDDB4EC960E77DB8183E3C43F137
-:10465000C6F3E0767B0FC97D3A39B52B6B188E9F78
-:10466000B3AD04F9FC365283F7E29E254C2F1F5C54
-:104670001AE313C01E312BA837772FFDC62370FE17
-:10468000134F99F1BEF444661FC6678FAC35E377CC
-:10469000435AD78A28478E6C617121F1F1EB2AD3F6
-:1046A000017E540E00DDED5E5B26833C3CE2137020
-:1046B0007CD9E377A6B2B8AF517ED4B91A515E3C2B
-:1046C0001EC3E443FD9AC8F7AB51E5C5A24A26DFF5
-:1046D000C3E4C1828C768CFB85CB89666263F65D10
-:1046E0003EC9877AAF3F1DE9B7E9553301FBAE49B3
-:1046F000526E5903743333066E92295FF8F7807C4B
-:10470000FBD427B8BCF4F94DB7FE660CC0EF30C03F
-:104710001BF8627532DEAFD6F96A11AE5A3E62FD01
-:104720001A233D6B794F3778C4D07B3EF47F373501
-:10473000C41155D7EFC03D942EE97AB76E137CF0C3
-:10474000FDA303F71CDC7B6701D615A0C3A6BBB88D
-:104750005E5D6D47BA3DF09D534B812E6FB95BC0D6
-:10476000FD13AFA71DF44AD31AC10571CDFABBD909
-:10477000F87A3A1EE8E5C0A38C7E281DBB80CE9B4C
-:10478000D63EB017FB6F105C30FF8175B5A8871B54
-:10479000BC22C1E71B0EA2BD4CF501E60DEDF68A69
-:1047A000A940E74D6D1605F0AAD18B467F07F9F7B2
-:1047B000A789D53DF25AF87D8A2C5744BA1367640D
-:1047C000237D356F3123BD347B193D1D7C4A443A2E
-:1047D000DCBDF4FA4AA09F131B8528F447E9AB20FF
-:1047E000445FE2E3661C5FBF99C51776AF65747DD1
-:1047F000A48BD9A7658F0F47BFA6FE353361F1079C
-:1048000062D3DB1FE7A3C370BA1BA097381D46A372
-:104810003B8FB9733AE41FD4FE82EEDF15825759FD
-:10482000FB77300E50D67E039E57E31F78AF05F21C
-:1048300036E6742C61F98C12CBEFF9D2FB0ADBC798
-:104840008321FD980FFA11F24FFC741F2F6E79022D
-:10485000ED804F9E3C88F98DF39EA3F8A7FD4F6C29
-:10486000B1133FDAD93E94338D5D22E69712C95FCA
-:1048700078ADEEFD2D2D2F63DE2FED08F7C6AD16BA
-:104880005F351DDFF8ECA191784F7E2FB353BD4FFC
-:10489000B2EFCC106FDFC86B213F5362F921E1FA10
-:1048A000D73684C5718EFF260EBFC7246CEAC17B44
-:1048B000A6C6CEEBCD165DDC521C6266BF03F19B33
-:1048C00038F69E19C53FDC2FC2FEF4BF27A1E5854F
-:1048D0001CDFCCF8A7719B19EDA3C64DEB30DED7DA
-:1048E000BCE914E6CF96FDF2A9788043F336D1985F
-:1048F0003FB549F45B30CF4B3C6861DFE530E431D4
-:104900003575B1F73B9A3A799E5058FECCBC5FEEB4
-:1049100078D64B4133EF999FC5033F7DD4BB311E01
-:10492000E049E7C3FCA3AB8BA2E4279D2F2FA9731B
-:1049300005CF4BBA0A7FA7233C2FE923F807D5E31D
-:10494000F94338DEB5BCAE4D4C6E51EC17467A0FCC
-:1049500049B35FE63DF5F98F218FF6F8D68F7F0CCE
-:10496000FB9FFF8F4F7F0C791D64678C02F644F329
-:10497000936F61FEA136AE7A08B3A74E6CFE19E6BE
-:104980006F9E78D78276E1891D47B2C05E38F1F418
-:104990009954C8CB5CB4A302E3138B7E5586EF8792
-:1049A00046F337813E7D17903F1A8E8FDD5DA2DF83
-:1049B00046F7F9C93B16E4FFFE3CB3CE052C7FCF8A
-:1049C000C5F3CBB644CED3D5F2A19ABAAEBD7A1C0C
-:1049D000C8BB2EA6D7FBF3A3CE9757F63B8AD74B7F
-:1049E0002F007F5B78FE60E75511F3CA3E817F5050
-:1049F0003C350E31E6957DDE75DB4F1E83675D919C
-:104A0000DFD3D6F8FA7C70D3F2802F1BA2DE3904F4
-:104A1000F868EBCF318F0FF056ED02FDFF7916C429
-:104A2000378F9A0318370CECB02890EFD5B8E30015
-:104A3000F2CB895FEDC73C5BC2F3714F90FE3F96AE
-:104A400037C96317CD1BEC2C1F8DC31FF2D55CF14A
-:104A5000D8CEF3D2181D6BF96AD1F2D47E3E84D938
-:104A6000415A7EF20257AFACD842F802FC084580AA
-:104A7000AF8386FC3FEDDCE1F3290087CBF4F997A7
-:104A8000D1F201B99D3E005F4C2E9F58C7F331FB18
-:104A9000F32CA949970FF9414C1F36FB840391F081
-:104AA000ABE55FFE340CBFDAF9A2F185C69FE7DF04
-:104AB000F75783CB9A212CFF5F83CFF1B391E57435
-:104AC0000FE777EAB7F887E8FC965BB9DFA2E59DC8
-:104AD00069FB6DEF647AF9F826663786F3775394AD
-:104AE000DFD37A6308F3EF9AB6F58C0439747CD778
-:104AF0006F38DD31BA6EDA7250F672B9EDD3CBEDA4
-:104B000028BF5FF62EDF37F57723CED7BCE554C438
-:104B1000F93E92D4EB61FF1FF5323BE4A34E31E244
-:104B2000EF20ECE67AA9FFDC7619FD2E313E16E582
-:104B3000D1227BD13BF05DB7457619F31D5A97F032
-:104B4000FC887BDCF83B1EADF649F8FB0F4B013EC1
-:104B50003A3FD4AC78F07727CCCE9A02F0AFC2DFE0
-:104B6000EB941D26E2D3E35FF2E2FBBD5386FE45E4
-:104B700002BDD3BBD8F8DE48AFA4EC49A6F3F59646
-:104B80000B6EB07707D29971FE6B54D1103F8358EA
-:104B9000359CEBB49B7D0FCD6EF22BB40BB1C7F4FB
-:104BA0003AD1D173B1DFABFE1F05EC5EF50080009A
-:104BB000000000001F8B080000000000000BB57D06
-:104BC0000B7C54C5B9F89C3D67379B6437D990047A
-:104BD000121EE1ECE64D4258C2534539092426F233
-:104BE00070414554D4253CC23389F8B8D4D2B24080
-:104BF0008C88B40D824A7BD12E34A87F4B5B40BC9D
-:104C0000050DFE170816ADB551D16AFFDA06880802
-:104C10001A6005CBCDF542B9F37D33933DE764438C
-:104C2000D0DB7FFCB5C39C7366E69BEF3DDF7C3336
-:104C30009B48E89F8790752BED598A959004E295E3
-:104C4000884C88D3AB04DAF208FE5DA1FF4B24B494
-:104C50006EE775371647B34613E2608FE87BD701DE
-:104C60008B44485C1EC9534612E222715E99D637C6
-:104C700026686F4A0984AC77FA27D3CEC915F81B8A
-:104C8000DFBD245EA51DC6B3D3FFAE507812C7D2D8
-:104C9000BA3D327E9266AC27135D1DE1D108E90B67
-:104CA000CFE99F4A48B94C21A3702495598231120B
-:104CB000BE9F9CDD37026F522AF186E0FD148737D4
-:104CC00040BF7738187C025E0ACF718047A5FF216C
-:104CD0003C856D010B41B88EEBE1A07F92CF89F04E
-:104CE0001D37C1775C0FDF30D59972B2805614A2A0
-:104CF0005CA1F875D85B09C7F3793D9E0909106579
-:104D000034E053E095BEA7FDB8A54DCA1509F0EAF9
-:104D10009248268E676A37D075329ED769BF7BE18D
-:104D20001FD711D27F89DA62A3F3F4D92517A0A186
-:104D30001F85B51590A0B4DA0019CF3A443D64231D
-:104D400085F4BB3DEFD9DA68B974E77BF8DE02750C
-:104D50005A26C7AB13070C27E4FEE0305F5A3E7CAF
-:104D6000373BCDE2C57AAB924A48C3347F9A653867
-:104D7000803FACB16520212F92BA21127D6FAF2FF9
-:104D8000683D7223F015FDEB0FEF0B5AB54278CF5B
-:104D9000EB8484089DC78B715D75CD9E46EB9EAEFE
-:104DA0007A00EA4D80FCEB61BC82D67ADAFEB0EA8A
-:104DB000BB5B1D45C8B4E72C444A21647CA723286B
-:104DC000011FB4F521241D9AD5C5015DBAF119C59D
-:104DD0002F498D7CD7233FF2EF289C153BE9FCA798
-:104DE000F967FB268E20648CC4F04A5C6D23A63BD9
-:104DF000018EAA256A6AA4DDB4E7CECB1E0ADF12B3
-:104E0000CA53D03EB1C2754B1E852F710BC5960A91
-:104E1000DFFB1F00B8B357F82DC01EE349DB831238
-:104E2000A527F93405E111E334EC97917F1B1EB3FC
-:104E3000045723FFAA926FA89E7E6D26FA8519FD5E
-:104E4000F61E43FAD5341F63F4DBBBF500D0BFA6D2
-:104E50005972C5A8301FEF2ECA44E4F1E0049F3216
-:104E600088D23526DC0074B59212DFE47CC4EB6393
-:104E7000309F6E78E5F0F586D7174F6D7BB2887E50
-:104E80001AE8B078B349045FE2BB1DAA0DBF2BF24C
-:104E9000F89F023CD46E6A6B88A570BD76EAFD046B
-:104EA0003F8537BBE37CA888C29B3D0EC5B86BDC51
-:104EB000173BB61DB0D17FBE087C4C5FE410FF6A83
-:104EC00097E36AF860FCDD858F3DC7103F16A8D3D5
-:104ED000E7BB6D6401D0B574AFA40581BF63C8FDA5
-:104EE0003E5A6E5729A351B8F6A9322F2546C70E50
-:104EF0008FA2D2F6A5B75BB4202D137919997F3D07
-:104F0000FF5E61FCC5F121E829F88890C6F8699434
-:104F10008E79B9FEDD46BE792ADE43DF8F6F3FFE14
-:104F200020B144DA6D5F497C73AD91EF28FFFCCC72
-:104F3000D0AEECE1387F61E47BE04BE013337D6879
-:104F4000BB109397A7E2611EFBDACFCB80EF6BA576
-:104F5000ABF979EB4ABF6FA2B567F9F195C83EC0CE
-:104F6000ABF9F9518E5FAA1902ED79A0B5259248E7
-:104F700051DD2FDD7F14E05B6A6F4BB89DD2B7A681
-:104F8000E4820DF0B03AFEEC0DFE28FDF40447EB90
-:104F9000A55C878FCEEF60670CE2BB5B3BA0271D53
-:104FA000E7DD95337D1329833E119750C4952DDAA3
-:104FB000B3895CEF4ECC5A349929AD2EBB275D895D
-:104FC000216810146A47CAE00985AF62EC2E05EC2F
-:104FD0006719D1D94B37F6BB8D0C037A580D766D16
-:104FE00052D62DA7C1BEB42A6D6B1229EA5BD32419
-:104FF000B43F375F6A6C01DB75739AD560E72A5559
-:10500000637D126176528C334DA374E7EF2FE0FF7E
-:1050100007717E53558A5ADAFFD4ACB860804EF9D6
-:10502000D6B177F926EAECC57B97E5FB7D85DDF106
-:1050300033D92DF0E343BCFE3E96E26718CC73767D
-:105040003D43D3D5F161C6A3192F133F9D3F99145A
-:1050500075C7CBB5CEBF0BAF84FC04E6374993C907
-:105060003A7704AF66FCD0BF29F0DD7B25F43B091D
-:10507000FC820EC542EB95D74944F805657D7574F1
-:10508000E7F099F16AC69FF03726F176EF00BE2867
-:105090003F4D92B738801F2A7FD43A3199EAB1CA7E
-:1050A000418CBE2444914BF17213419C015EB721A7
-:1050B000DFB9ACE86750BBCEF8E3D3F2D3121D7F63
-:1050C00072277D47E12C57A5201511C0CB71135EC7
-:1050D0008E9BF8E2B87EDE66787F0FFFB82E0ABF9F
-:1050E000288D7920F713DCD43F01FF2183A857A82E
-:1050F0003D1AFDC9C844A61FA2DBC9F19DBEAE7E04
-:10510000183E1A916F24E2EF7AEEA2FD84346B0A06
-:105110004503996077A19C4C20DA9A763BA04246E1
-:1051200038055C97D37CB7BB69FB1252B9A65D8F7B
-:10513000E74F853D67F89EC0F13781040EC80950DE
-:105140002ADFE8E72DFABB57CC6730190CFED08771
-:10515000AACAF432EF4FCC2F399984240A6058B28E
-:1051600007B749003F09D8FA44C6B372FA9ECE9AEF
-:105170005EED46BD5E47005FE0B6003D4BF9FB5279
-:10518000BB2304F010BBB5A38B2EE0C390592EF0C7
-:10519000FB285EC895F8087C0FBB25E5645E04BE5D
-:1051A0003347EC0199F2F5C474FF0F000F1DD23B99
-:1051B00045802FEA97E5803E37BFBFF0714B0DBCAD
-:1051C000A7DFCDC7EFF8BC1683D34DF926BC3F2629
-:1051D000B8CD1D4D9FAF62FAD74E3D519D9C96C6EE
-:1051E00031399F447C0AF8970763999CB5C42E44D3
-:1051F00079282775F543697F7F8CBBF908C8592545
-:1052000009E077652E231FF6C6A7B790F07DE0F77B
-:105210004ECAB39AFCE800D2E7606C6E16D8B3832E
-:10522000B14C2F0BFFE165B7EF5937BECF08825E57
-:105230003EAE8D7A17EC4455C9888F46D2D262F7BC
-:10524000D9809EF380BF285EC7027FD1B607A1EB4D
-:1052500074E4AF20B49FB3D6C45FF664ECDF47D5E7
-:1052600018C055AA59BFD5FBD55D78E376B2377F14
-:1052700091B428248FE2752EE7D383B13101F0E396
-:105280004A9FA0724CF13787F89F6F94000EABC114
-:105290007F9F1B6B457F6FEECF6351DE69E32D75FA
-:1052A00074C8F9F4F93ADA0FC95307EAED3A69D448
-:1052B000B507FADB55E4C7B92EF6AC9DF691DE07CB
-:1052C000FAA5DA8DE2936CB69ED7F3A579FC1EFBA6
-:1052D00035B53B28919960570F5AD5815E9DFD7871
-:1052E000D36DC1F99FB7676FB1787AC6D37C7BB2B3
-:1052F000A68C88D44FC6C6CE8CE62788FE045EBB3B
-:10530000D617E49BC6967191F5C563ABBF6E3D326F
-:1053100048BFBEF8BA55737CFFF5C5A9AD5FE3FA87
-:10532000E2690BF50F016F8A2F7F9ACE2FFADACD43
-:10533000FC976096F635C8E1D3DC8FA41C943F6DD2
-:1053400068F7EFFA2E9F404E50168BB193406C31A8
-:10535000D5030A09588BE17BFF2A0BA5B73293A02E
-:105360005DA27A08FD4F331E4E6795FE03F856C8BE
-:1053700067691CE57F2A8F4F58D4A646F0B3DF96A5
-:10538000A9CF4A475F3E07FDBFDB962FC4F2DCF191
-:105390004B39A0174A39BE150FB3EBB5F14CAE6AC5
-:1053A000E3991CFD31CDAF78E8F3564D768EA4FD20
-:1053B0002DDE2B7B63102DE10CE0B7DBA6C8A9F036
-:1053C000FC84DD8AEBC7834E46FF1344AA00FC949D
-:1053D000BE17E3DB43CB47D34A723D3A3FF1D1B42A
-:1053E00089582715D4E1A37CB9CCCEE4E10471330C
-:1053F000B8D74ADEEDF4D1F9B5EE44E0CF8356627A
-:10540000F047D23D0AC29BEE6178ACEAA4C2398271
-:10541000F15D1D1DBF4A516DE0FF5775DAF039C0CF
-:10542000817C196BECC7E361FEB8C7C3F8A9AA5326
-:10543000C220C1C158733F0A7BCEF9DB4C87A7DC81
-:105440001372603E8FA669B91EF45F5505F0533A9A
-:10545000B2E563D087BDEBFF8004FABFF692141A61
-:105460004CE7DFB1C78AEBBA0EBE2E38B3E750DF88
-:105470002A5A2EDDF54102AC1FC7727A9D515A138C
-:1054800000BE25AF527FBA10D9B9EF3DD87ECEE825
-:10549000756C18BBDE2E5E7F3973A00FBFA3008E24
-:1054A0008EF86513EC8120C07770953C13E846EDCB
-:1054B000A6F0CB24D093657B642DB6A8BBBF36D5B0
-:1054C00063E5FE3AA3E3432E364E4FF25DDA194F01
-:1054D000823AF92E555405E02FED4CC0E7674E6D2A
-:1054E000DB3895F27D20CD8AEB436A855AD05F94F4
-:1054F000085FF0D13A9D4F0B9FCFE13DB7DD7E03B2
-:10550000FDE79B607FE83713DBFC294CD8E9EA6EA6
-:1055100074C4FF2A7319FD44B31F29EC5945F3865F
-:10552000FA0104F01EBCED06E0C3530A013EECE6AE
-:1055300067DB6FEEC19FDC807CF4DA9E5FE13AAA04
-:10554000C8A362BD76CF8572E0E31A129A01FDD638
-:10555000EC915D21FAF561B2A700EC8AB0FB022F55
-:10556000A14B87EC5EB00BB1B26B35CCD37E8743D9
-:10557000A578BAE15C610ADA3FBBB502F462696CF6
-:10558000B6638E8E9F0FA6C815C0078753328DCF86
-:10559000ED1B0BC0FEEDB3307DD472F26E471B7E67
-:1055A000775B0AFA71C2EE9BFC561127ABCC96834F
-:1055B000D1FC61226FD9144BDF4FCAB51219FCF729
-:1055C000B645E80F74B3FB97FCB83E30DB7F8177BC
-:1055D0008A6994976E7E6B04CF06FFF5690F8F97EB
-:1055E000A96428F8A3A14B1B17039CE79AE35DABC2
-:1055F000311EC1FC9D73ED8B364E81E7EFC8185FFD
-:1056000039774946793AF8C6E2C16D3A39A61604A7
-:10561000E97471F8D7675FA7F4B9F8799C3780FC13
-:10562000B7B320DA7A59ACA3E8C8FD2D69087F7FAB
-:10563000CB5814375CB7DE1459B7FEDA83EBD6705B
-:10564000399893B42DC76CC01767A80B0FF00628C4
-:10565000F1B753BCDEA4B5C92E1D3CFF97CB7791A3
-:1056600047DB057A25404A0750A7852C88D34A6E28
-:10567000007F741A716DA3F3D97FAA54B2D2FAB81D
-:10568000ED6EAF44EBBBC12105BE7D550E6EA77814
-:10569000D84DF5F16EDAEFC2D6469B9B8E1BD843F0
-:1056A000811A43EB9490808753D64046928E4F16D2
-:1056B00065B2714F59FDBF847E4E7D1243607D7887
-:1056C000EAF3B8A876B83893E9CDD7B99D7364AA40
-:1056D000D83ED4F1DA9BFD295CA14ED770C0FBA265
-:1056E00097BE9667D3716EE4FEDAE44DADF510D740
-:1056F00099BA25AC80FEF1055D656082A7BFE4B56F
-:10570000825DBA7D87CF0AEEF98C3D7556783F737E
-:105710006FE361A8DF1DDA89755BA6FF23C0EB4D3F
-:105720006BC387805DB21A89027241BE617E589850
-:10573000CB9DA7D37B3011B9BAC4027CDE35FE8A7B
-:1057400056055CA2A9F56C7CDA5F1BF657179E0024
-:10575000F62D6339EB2F831C5895A846FA1D7FA9B7
-:1057600055D2C71B4A7FB804F9E8F947970C4E0693
-:10577000BCFF358664BBB96CA4C0F38141587F126D
-:10578000A52D7FBADE3F23A118C637C4CE4AC14F2C
-:105790009A9DF1912B0EFC85479EA98B03FD90E20B
-:1057A000536D7E1D9D4A374E1EF216F0696C0CC675
-:1057B000ED2E0E677EFDC50D8E6080C5BB8700DFB8
-:1057C0000A7B5505F436C4A384BC33BEA75D04012F
-:1057D0000E511269B58BE8EB24940670757A187D2A
-:1057E0009B6CEA2C18AF292EC605E355D9B36DA0E2
-:1057F0009FBAE29F1044A47AE206EE6FEE3F753046
-:1058000019E87A71F8AA0C5817842CFF8EFAA83779
-:10581000BE5AE2D1923211CE4006ACABC4F7FB4E79
-:10582000C615823D7C5DF861DED98361BEA25D5103
-:1058300026F30BA83CE0FC851CA4B4126D6B21A2DE
-:105840004ADBADC3477E268BE38972B7550D3039ED
-:10585000A27E08C8953364CF0479DD9789F5141FBB
-:105860007178E9FBDABDD95E594539CFCF4C8DC887
-:10587000FF8D5CFE535AC32877D7BA3E706532BE9F
-:105880000D293BB9FC10D443203F4C4F870630FE16
-:10589000080C00BA805EE0F449976859CDE92CE61F
-:1058A0009DC2E57E2A976BC003BCAFE4F314EF6F93
-:1058B000E6F82A930B13DBA2C47DBAF86E793A019D
-:1058C0007FB16CF9002C2B39BC0BED1B309EBA302C
-:1058D0006503C65153B4462C174E6CC4E7695B662A
-:1058E000237F2CDC2C19E2A2A27C81FB5F674E593E
-:1058F000D07E114B5C7FE03FF1FED7E067B0B8F09F
-:105900001D80E7D37B363E53A446E2C2A79B983D59
-:105910005C1067F4EFEEE6F3DAFFCDC164E0978B3D
-:10592000B18D53EF0639D92EBB56011D9BCA2435C4
-:105930000AFFE9F10C78AD6DFA4739CCA386B4358E
-:10594000809E3ECDFD32B559427DAAEEA5653F2A27
-:105950002C4D4CBF9EB232FD7E4A4A96403E40BF1F
-:10596000839E3DF5F9BA8C47818F2427FA37A037FB
-:1059700077E9F863F18EAD0DFDE93F6FBAE41A0ED9
-:105980007C15528843AF9F059F087D6B867B05A7DA
-:10599000ABE0C31B22766805E00DE2A740B29A0D8A
-:1059A000E7317EBA81D3AF09F80DE479ADE0B7E114
-:1059B00016D4A726391EF32FD2DFFB9EFA4506C662
-:1059C00025C652B9A5727D1AE43A0A5FFC9CD36FD2
-:1059D00089C7BF29338ABE3F2DF97F999C1969BFBA
-:1059E000EFE42D43AA74FD3CC8F171D1EA1FEC8AA3
-:1059F00082AF085E497FA0F3024A19C003D922B9D9
-:105A0000C0EF13EF53B6B07D8097B91C89E7A22E83
-:105A1000F03D1EF09D89F87E3993D97D1B98E4B442
-:105A200020B3FBC4724B7FB0E30BE3B45B300EB327
-:105A3000C14220AE44A452E4F794A6A74F5E1E09CB
-:105A400065AC07F755A85F0DFBA50B9F50711DB8FE
-:105A5000FA8558E4B350A607E7B5BAC98AFC76DAE6
-:105A6000DA98817CF9F9A2C1B02F13F884D9A19EEC
-:105A7000F029F8E727DC5E0BBEF3AC677CD7A4689F
-:105A800071C077C28E0AFE3CBDFDE6629037D13E02
-:105A9000C237AEE1826F66D3E79EB56D32D087D252
-:105AA000ED8F8087CCF561D45F3DD14DECB709FA1D
-:105AB00009BD9E906531E0FB330E7F0AF75FBAD3D4
-:105AC0007195811E3746F8FF5333FF5BD5883CFD47
-:105AD000A11739B83ECBC5E20C9FCD4903FD22F694
-:105AE0006BC43EAA18FF2CE7879EF65B0EABFE3315
-:105AF00099BAF9C07EA08A7A9DEDAF94717F7BD967
-:105B0000F698600CA5DF3E7805FAA23D2E087EA22D
-:105B10006897AB104D2926E4BF33DD385E2EA80A06
-:105B20005A4F596E235974DC8BD71D6849A0DF4F3B
-:105B300009B74D1E46A7B6CFD676FBAD10F725DACE
-:105B400022F02730560F7CDEC1FA25AE9D0638AD17
-:105B50005916C33EA898774F76AB277A5C9FC5F756
-:105B6000C7F87BB39C1FE3F83AC4CBDEE53490085A
-:105B7000727A1309AC82FD117289B8C01E77C9E927
-:105B80002582F6657096514E453D8A9C0ECED2CB4D
-:105B900069671B93532E8F894D562D9A7F32348B14
-:105BA000AD7B139BCA4AC09E24FA08C63FE8345115
-:105BB000AE1752B906790D807CF6037C32FEF2688E
-:105BC0008DF7C17B4F13F3AB2F26B1F92EBC513BA0
-:105BD00020839C53BF5EA29F3672B9EE19EFA14499
-:105BE00089D9A744D027378D6B9B00F656857D81D8
-:105BF0007E303F46DFF1E3483044E9AE5E224C4F51
-:105C00007CFE8BFB1E05FDB0C1E1CD5623F627ECD3
-:105C1000F197001E7A9267CA971AC4A396FD9783DC
-:105C2000AD037BD81F1FBF5C46FEA37C7E4B960E48
-:105C3000FFE37D6119F09A1CEF4FB32611724FD329
-:105C4000D0E9F641747E6EEADFD2FA4C5A5F0F71EA
-:105C5000B73E6D84D79F72A47FFF38DD3D5985EF35
-:105C6000D753B80399DA5D59A9B86F7D0FC073D3C4
-:105C700080B00CFEE7B5EEEFD7427C8ECEE7F81D84
-:105C8000435E984D9F56DDE56B80B7228E3C86C7FC
-:105C9000916B9B87637C59174F5E94759578726FF3
-:105CA000E32670B9A7FC8DEBB884B16119F4A2D0DA
-:105CB0002BCBB3FA707E6E23B0AE10F2057A09FCDE
-:105CC0005A916700714527EE5704F17BA8271647C4
-:105CD000F4CDFA464B4534FE7E3CCB11558F92E60F
-:105CE000FFFE8F4747D3F9C22BA6571FCFD2E9D566
-:105CF000A6C6E37D999F4AAD3CF51B1EE46BF98D6A
-:105D0000ABBD7FCE02BE7B57C678CA7531B6800464
-:105D1000EB7E8DA8AEBEBC3F10BB6629E42CA2F57D
-:105D20006F25A2419CF25B19CB8D3FF655B8216ED1
-:105D3000F2B1C5BB9A60BE02E267EC6012B4D37FD9
-:105D4000EEE5F1CF92130E0DF200CE4976D49FE727
-:105D50008EC505C07E9E735A306EDEB23F06E5E208
-:105D600042561C8F67040D710FB19F73E19D39C9B5
-:105D7000A0F79FE1FB9BCFC4B2B8EA3377E5603C64
-:105D800052C46D1585E2BE0F84A9285EFB807F3C5E
-:105D900000E3A9228EDBD73E5B6249456C1CC5CE71
-:105DA000E6D757F14B101FDFDA4B3EC4EB59361ED6
-:105DB00007F0EF01FEAD5DD1668375ABF07B855DCD
-:105DC0001EDCE139007911832B58986C6B87C50272
-:105DD000F3DC4AD929C9DD9DBF041F6DED9E7770A4
-:105DE000204B17A79DF618CB3BE8AAF376BFE479C2
-:105DF00007E3DB8FBF02FE1C95F75D867665A97110
-:105E0000FE287A6BC6F21F62FB9EF87F8685F8A398
-:105E1000D99113427F2B7503C04E91BF3F12AF46FD
-:105E200089CBCCF8AC2A15F0628EA745C6FF318E1F
-:105E3000FF59168F1F65900CD85FEB6D3FD30CF7A1
-:105E40004756FFA068764AD0D93C5EF7F66C1DD65F
-:105E5000F59D8DF8773958BFC5BA7E53B299BF33D7
-:105E60004362FBF5E432417B2DF884E2FD3F812F54
-:105E700046FFE9C48838DCE709CBA00F2E7C9C35AF
-:105E800010F7DB7B58770A7808F16747CBEBA0E384
-:105E9000F9A2D121299BD1618695ED4748776563A9
-:105EA0001C60466C8C14A3F34F2E77D95BCDB02FBA
-:105EB0007B3076CC488C5F5AD581D1F067DEAFBDA0
-:105EC0009C45905F012FDE28FC24F695059E1B4A19
-:105ED000B41285C5C7C83630811AD3A3291504F773
-:105EE000D7C6481AE223339BF94D5B79BEDC857730
-:105EF00064D40BA34BD4206C91527BE1CE1E85F968
-:105F000057AF5874F957824F1A7E43EDB2217EC8BD
-:105F1000E44AAC9F93B83EA65EA3B64BF79DBA0287
-:105F20007440C41E0CACB71BEA190FB988A2B31792
-:105F3000495A9AA13ED0E78A8375D3C00AD5D04E7C
-:105F4000F09DC8FFC3BF1498B70BE34F7D383C6387
-:105F5000243FF20DE837880F97707AD2F98EC7F98F
-:105F600056B45DD0F38D986F6FF33ABE92C243156D
-:105F700058FB4A0A2FD50B73D6BB57A521DE5D040B
-:105F8000D6132757DAF1F93CDE3E69D3EC86743A32
-:105F90004452BD8A71D924ADEECD74C8B7ACA37597
-:105FA000FA37B7519260BD4EF50CB67B6EA50B4B20
-:105FB000416F177D2F817D2F2579B04FD3931DF32E
-:105FC000673B0CEBE1ABD8317FF6A8EE76CC62F7FD
-:105FD000BE05FBFF4B9B6515F862CDE43E1AF0D37E
-:105FE000C69D9217E26E879A591EDEC619CC9E880E
-:105FF00071CFBE9A8876E3ACC4E49CB424A11CD4CF
-:106000002671DAD427E17EEC39BEAE5E91E5AFCBE6
-:10601000D6E9CF8DCDA362715FD66497E89F4BA27E
-:10602000ED700F4E02FF69F85A2513F5C072809F7C
-:10603000CC6F1B119B097CEBFF609C047AE09B0CEE
-:10604000A0A7795F4FECFF897DC13FA6F95765EBAB
-:10605000F456F7FD3EE33E959C60C73CDEB132CB83
-:10606000E3D5D95F02745D037E22E5BB35C7E2103C
-:106070003F6B2E33F9A370FE04C669718E467E1203
-:106080007696C259F42EE90E67AD258CF1421D9C1F
-:10609000CF5C1D4E539E2B87AB0BFF7C7F4A762A2D
-:1060A00008FF3912E70538F7DABC1FFBC10E9F8DD8
-:1060B000C3F89EA04F0D97B173941E1285F3DCDEDA
-:1060C00011B11607F847FE17805EF2A07002F8E7DC
-:1060D000879A47E4C37C7ADAA73D9255FA7236CAAA
-:1060E00099FF37D06EBCABEDC26FD5C8FCAFB2BF65
-:1060F000BB0BDA7D07FCBCA6E7A3DEF053AB38D6BA
-:106100004A2C408E7E98C4F5B499EFA4E603FF05AF
-:10611000794754DE30EF339041826B28DE1A8632A5
-:10612000FE2373898A76D9C4272BB27C6F03FC4285
-:106130004EAF829F7701EEDA2C5F2B7C0F700C281C
-:1061400046BDF47E36B36FAFD82CD89EE5AF241190
-:10615000CCC731EF9F9FCEAAFA04DB0BFF2BCF2FCA
-:10616000B90ABF931C1CBF3A7F85902F96723C2DB5
-:10617000857D5DC857DB63ED30E44598F0F0789697
-:10618000AF83E181F2D948C6676BC855F11186EF3C
-:106190006BB3FC17002F4E2BE51740CAD8D9698086
-:1061A000E7C3AAF635ECFBEF5EC5F071EE4F0C1FAE
-:1061B000FBDA2DC8D74F93212897C596F3F741FFF7
-:1061C00054BF5C867EC685774AB06EEEB740B58018
-:1061D0005E1E10F6CA96ABF3AD9483EB27BF022583
-:1061E000A5C383408711EFB078CE55F8D60EDF7F78
-:1061F00007BC27E57C07FD43F92A15FA177C75AD26
-:10620000F956942FC8803EDDFBA3EB28DC5F38B045
-:106210002F06F555CD6E09F579CD1B5FE07ABDE609
-:10622000B51864CA89AFC5E2FBF37BD8FBB325D1AF
-:10623000F3013272FAA0DD59BAF3019FD14E07F093
-:10624000F9CFB4F3AE2C39B2BF9A3C859D435813B5
-:106250002BF24DD93E6B02E7B3E4413E0DEC507298
-:1062600019C17CC10407CB43EC7EDE80C96D2A6F67
-:10627000E772A912E0D97CFE408E63F985A964FD1E
-:10628000D780A7E40AE3FB544705EEBBA69ACE29C4
-:10629000087C97E570FFD946D2408FEC34E55588ED
-:1062A000F2FD1CEE07D627E17A50E170B5386DC8D3
-:1062B000B7CB9C769CF7B224923C19EB0ADA7F7339
-:1062C0003F5DFEA76621AAFE1C45451C5175FE5187
-:1062D000AAAF8FA1DE6F667FC3F7E97E8FE1FD80F5
-:1062E00005430CEF07D5151BEA83975F6FF8DE4D6A
-:1062F00011A0AF67AEBDC5F07D76E374433D77F383
-:10630000DD86EFF3835586F7052F2D32BC1FBA7358
-:1063100099A13E6CEFA386EFE51EFCF26773589CD3
-:106320004D167EB973A41FF84A76DAA518DDFA6F08
-:1063300019A7474942451AEC5BD63BCBD3607DDABF
-:106340009244EDF155E26EDF77DDD628E8CFFDAF60
-:10635000521E773B7B906A11CA7F3587281F0C43FA
-:10636000FFAB3187FB5FB355F83E6C437BA278717E
-:106370001E3312EC184F33F7BF2C478DBADE922D27
-:106380005ED764A9677C09BEEC0D5F9B395EFFB7E1
-:10639000F8FAC8943724D67BE6767FCEB1707FDCDE
-:1063A000BF3B47BFAE2361D987EBBA6FCE0608E883
-:1063B00051827E4D6DBC0BE312663F408CFFC734AB
-:1063C000DFEBD08F599FFA96CF67DF59E80243EE93
-:1063D00079BDF7E71CF37AAF6C26D223C966C0D328
-:1063E000FE2E3A6B86F55E7DD2685CEFD55BB5B468
-:1063F0006B59EFEDCF2188EFCD40D7541D3D6D5E39
-:10640000D5857ADEE8BF74F7CFA9FDA3F3DC087E5B
-:106410009D047E5932F3D7774B386F31EEF7F0CFCA
-:10642000DBF5F6A927FF3C8678D72A32D2EF4BB0AE
-:106430004FD41F7F3056FE5EFEF885EF620FDFB748
-:106440007A318FFDFD29325945F178A1624C3F1216
-:10645000451F8BF2288FDFECCE2548B7DEE21FEF19
-:10646000AF5C70D5F31CEF57B23CCDE9C047BA71B1
-:10647000D373195F8CC8E5FB92312C8E71E63F9C7B
-:1064800078EEE0CC2D1F261027E4B78D1819803C3C
-:1064900066E27D08F26F020E27C609A7578E1AB969
-:1064A000CAA9E3ABB10CCF137EFFA70488FF4CDF72
-:1064B00095991A70F4CC4F23F8FC88D2968379D939
-:1064C000AF9FEEABD272FABEEC5416A734E6AD998C
-:1064D000E346D397D718E47869A74482C9BABAD2F9
-:1064E0008AF9814B3B157C7E39C71857EA115FD773
-:1064F000884FF37381CFF72B4F67403CFD6C6C7472
-:10650000FFE37E8EEF2EFE319D83E9E97C4739EF74
-:10651000FF42C575FD40CF4DB7A9D9D712E7127814
-:106520006ABDF4453CE88937E07C4D94FEC7E7B28C
-:106530007DA537B4CFE1F80329B1872700DF97F0B5
-:10654000787A94BCFFDB7261BDD459F12FC9FB9FEF
-:1065500095CBE9C3F3EAF372D5A879FFBD9D5F9AA5
-:10656000668B6EEFC646F0F721C8EB83CF595D000E
-:106570005735F84E10BFDB6AC5F8DD07976208ECA7
-:10658000A77CB1C5FA2BC8575BF05CE6739B687DAE
-:1065900041650CEEFF546FB5B2FDB9CAD82084AA8C
-:1065A000166C7DB8EF1C3ADE57546E9764D3F7CF64
-:1065B0003D8DF9331FB4AFC3FCEDD320CFF4F98286
-:1065C000CB8FCF00FCEFB335160CA7E5921D92E1FF
-:1065D0001CC6A2A658435DE4030AFA1129723E4381
-:1065E000A5F6A421D7781E6B4464DFAC2197D96B44
-:1065F000CCB3AF99C2CE631D3AC9D6FB87B358BEA0
-:1066000060A8F2CEC9C3E93C2A53AD182F31E71771
-:1066100012824427F379FE6FE5270A9EBBAD1CEA80
-:10662000443FF0CD95754807DACE51A63B8F50F91F
-:10663000731677A974B3BCF91EF30E4DF986E27C8C
-:1066400050B73CC3C8F9A0E3D1F8E657B946B93E04
-:106650007492E515CE7F4766F3EA456F1EE5F3F8C1
-:10666000A07DC8BDBFA5F8F8A08269F10F2EDDFCA2
-:1066700018C4BDBEF04904F23CBFB814FD5CDA3F5B
-:10668000BAECABBFEBDC0ED0E7B68A855D7510CBFC
-:106690003B7C0F18CEF55CBBBEB9BA3EA9CE65E710
-:1066A00032CDFADDCCF7FFBFF4FBF4CAC3190127E2
-:1066B000962F40D9B18BE947B39C9BF5B980CB0CA1
-:1066C000EFD24ED990873C16F4C028BD3EB7E17B8F
-:1066D000EAEEE37C02A395E01A09FD80CF81EF4743
-:1066E0003A82C92574887AD7B6F8ABC56FE8FAF94B
-:1066F000347C5FE3F6774099FCC7FEA560EF47BCAA
-:10670000B313F308CFF5904FFEA1DB94BF2619F722
-:106710000BBECD2DF910D6FFEB54560AF91C498556
-:1067200090E73B7C9BCBF6E57E0AFB96356F5D449C
-:10673000F97CDAE64F83F840A0BFCDBB3D4A7E88A6
-:1067400092F7DDCE25EC80F83CD03D2FCFB0DF07AF
-:106750007122CC5B381E8771A2E7D3B4B83CFADD56
-:106760002B695A7C1EE8F334CD91A7B34FF57C9E7C
-:106770008A25BA5F5C9627F8DF87767C5E29D5BFCD
-:1067800051F8D09BC7F2F94B9EB92B03E2719F1FC2
-:10679000BB3B03F463CBD363AE9AD7F633904FAAD7
-:1067A0003F9F04BD9F1DD94FFD09971B11EF9E67A9
-:1067B000F3E5E8F3B192F392D87EED75BB5B3D94BF
-:1067C0004FDAD7CBA8BFDB1D2C8FED8443A9682AF5
-:1067D00064ED520CEDD8F90519F89ECAB1E250BE2D
-:1067E000D5EBA332E0E9D49EE759C6E964235E3BCA
-:1067F000B4B71DBFC50E76549634178BFF337EB8E1
-:106800008E8E00FCF038D76397D3FCE301EF366E31
-:106810006FAFE3F6567198ECEBC0ABEF8FEF4DD353
-:1068200026423F77A7696540D7BDB64001C8CDDE97
-:10683000B8E8796993F2983F129BC7F98538D07F01
-:10684000C5F164DCA79F9AC7F6E97D50DE3420BC11
-:1068500006F2C93F74BBBAF6B97D789EDE7707BCF5
-:1068600027696DE456C893A3C0C23987D74F1D2747
-:10687000A0BF12C2ED04F269124CF9AEA2FC2A8F3D
-:10688000F91FAFF17DCFEE72C7F8CCCFE16CA2F269
-:1068900002E74185BCC0FE3AE44BAC53FD5CEE58C8
-:1068A000BE47D3537D24D867F168AA05F803F24C9C
-:1068B000413F99F3839AF3981E053994AE22870FCE
-:1068C0007F47396C7A6AB22516E07C94605E075582
-:1068D0007EABEDB4FEFC329717CE8765AE27B80EBF
-:1068E0001AB43C6E1BAC93025C9E066F22AB63E94C
-:1068F000D76E9EC727F2A2DDF56D0A9E177894E544
-:10690000E99DFEFC16D909FD7F2DFA37E6058A3C84
-:10691000BE468E5F318F251EFF93C01FE6BCEA9EE8
-:10692000F3BFBECC873C87E784BCF33C9C713C0F33
-:10693000675CD3D3188F1BD774B322D14F9E5742B5
-:1069400012ACF79EAFD314B037BFCB637939BDE536
-:10695000C1BDCCF9B191D3B9A77CCA17F87751F270
-:10696000295FC84BD5E593FD80E5533E9EA7E2F72E
-:10697000CFF33C9AE7EB58BC6ED14BEF49FABC39E8
-:10698000F19DC8BB1BF810CBBB7B5E698B05FEB9C4
-:1069900018CBE875F10771C15518946F1B1EFD1CCB
-:1069A00082398F9CE58F0F0E874B301F8810BC07F4
-:1069B0006148BE6AA0CBD6B02B0EE4A5377BF0268B
-:1069C000A7E7B5F2E18BF90C9F51ECE63B80AFEF06
-:1069D00060375BF398DDFC20EFFBD84D6E2F85FD13
-:1069E00014EF8F717A56E751BBA9F36B7576F358A4
-:1069F0005E14BB99428298A7413A2C5E7D5EA8281E
-:106A0000FDBCDFB73DDA17D07E1C8FA724741C278E
-:106A1000924E0F4DE7722DEE9778B10FB97F5A94D1
-:106A2000794CE1FD596685F13E8A8466296A1EDA51
-:106A3000876EA64FA85EFC4F94B3C1546F4ADDF534
-:106A400066147AFC13BE1FF08E760898E4FAA4A6AA
-:106A500078709FAE420F4B7E2AD04393A114F82F3B
-:106A6000BE625C470AFCC7E533F9ED9BADC5E6D3D2
-:106A7000F22F5CCE7AA24B7A3EF36386F052E4A901
-:106A8000EF36F9A313F2195E6ECE37C61575F44BC7
-:106A9000CF8F423FA187DFF6F806023CAF9DDA1D9B
-:106AA0000F7C24E824F48F995E11395B25F6C9B375
-:106AB000F3A3D81FD1DE6C8722ED0308F756E0A3BD
-:106AC000912CDF07CF11F0F308023EC1E71A9FE7D0
-:106AD0005F3DDA7080D70CA7ABC3225D0DCEA470EA
-:106AE0008A04F29FA4B9B07CFD944502B85C6105AC
-:106AF000F3DD5DDC3E9AED2055171CAFAC9F17B956
-:106B0000DE6838C3F2101B4AFC6910FFCFC9D626D5
-:106B1000025CD5795A1994D7656BE5507EE8667E9C
-:106B20004B7ABE560175912F6086D397DF957770AB
-:106B30002BE033612209803D84FB64609F2581E75F
-:106B4000312468AE52B063095B08E60924C7870F99
-:106B5000C4C0FEDFD3C40BE79F7202AA05D65F99BB
-:106B60000F69ABA16C38C3EFC52921787EB22B8F9A
-:106B7000AEDE837974206F7A7EADE278AECA677A32
-:106B80008EFA21F7E733B866E7EBFC1021473DF9B1
-:106B9000153A395C80EDAE5D0E6BF3BF9B1C3EC8B1
-:106BA000E5F0A16B91C31F46E4F051F8BE37395CA4
-:106BB000C7E5EFC55EE4F0FFF07E7F97DFA31E5DC3
-:106BC000174D0E459EB0E0779043B0F741DE1FD5DC
-:106BD0009F3FCB4FFD5E72B9399A5C9AE5B1ABBF6E
-:106BE0006BE4FF9EFCBF0143FC7CDED1FDBF1D3C7E
-:106BF0005F5CC833959797B9BCFC9ACBCB0E80F7F6
-:106C000043B78AE398E5ABCBDE84999E80FC3C7D5C
-:106C10009ED6E108BE5E857ECC7939E34CF1FCCF8F
-:106C2000F2193FBCC3CB84F071027A81E2ED8D7C16
-:106C30009DDD7891CB4B602CCB3BA5925A0A7EE52B
-:106C4000BE0EEA470238F90CDE719B5B0F81DF480C
-:106C500094C678B8E7AA273C7986A8625F202A9E66
-:106C6000E8F87F86F1CD746B06BA39BAFBF3667A21
-:106C70003573B90D737C7C5F3804FE008E61088724
-:106C80006A59A7B3F39F733D41E16D0778C74F0C75
-:106C9000CB04E10AC5C3FE89D0A764206D3FB27B57
-:106CA000FB8E48FB0EA0D7788DB62F8CB44F825048
-:106CB0007E26E831AACFD04FD6F0BC62839BF18309
-:106CC00099EF9B6CEC7C4417BD1AFB23BDE6AAFE32
-:106CD0006FA1FF26859D1B695AEB92D8794096EFEC
-:106CE0007B225343BE8DA287C890EFA68794214C88
-:106CF0000F59875C831E720CE9D243F1F07D38F79F
-:106D0000EA7A6800FF7EE090ABEBA10CFE9D67483D
-:106D10008FFEC0009897590FAD53191EA2C8E960A5
-:106D200080EFDB5C4D8592CAA97B486AC4AED17600
-:106D300099509FCBDBAF6F64F9160112E78DB6CE89
-:106D4000F00E715C6BFE9997C3F99DF2A837FEB8FF
-:106D5000CD06F816794E625C73FEB4A0634DF3AABB
-:106D6000116428E4695DCA00BFF2DCB16F313E7284
-:106D700024AB4A83F15BF68F31E46589F197F178B2
-:106D80005A995CB813E2B3E78FD830EE2913F5D9DE
-:106D900071149EDA235612443DC5EE1B10FB61D6DA
-:106DA000230DAD108FB712DDBD50B89E5113816F0A
-:106DB000AD47D8FD4C2485BD0F10FB2A76BFA371CB
-:106DC0009F3F4933EEF32757F431EDFB1BF7F9FBF7
-:106DD000CD34EEF3A7FB8DFBFC0316149BF6FD8D63
-:106DE000FBFC8397979AF6FD8DFBFC996BA79BF6AE
-:106DF000FD8DFBFCB99B8DFBFCF941E33E7FF55B10
-:106E0000AFD8605D5DF0D232D3FEBF71BF9F22A4C8
-:106E1000354B775FCCB0BDAB0DDFCF6D63F7900D19
-:106E20000FAD33B66B64F71504E87F80CF2F88DF92
-:106E3000067CA690F09B0320BF25287943F4B385F8
-:106E40007B778D86B298C7C5AB371BEF395818349E
-:106E5000D6BF7ABBE208E481D58210D17E6A5F9208
-:106E6000824177CF745FFC92B1BD88F32EE6F3398F
-:106E7000CF9D82F35B643CB76CE693EAB76E63F731
-:106E80008605B456B8F741E041F08B8BF38B804B0D
-:106E9000E063B1BC04E55CE041DC9F55639A7FB7D9
-:106EA000F9EEDD8AEDCCF336CF63FB90AEFBB0702C
-:106EB0003F8074931307CB13A2F3827D72399067DE
-:106EC0009213231E7AC2DFB5CA8DCAF1109366945D
-:106ED0009B5835CECC77486F333EE3F38CF264C6D3
-:106EE000A7D3DB3F2A7F89FB4F713EB01FB25722E9
-:106EF000BF90BAE37541F386860151F8897A7E988E
-:106F0000E761C6EF7B26FC1E56FD47413F5DF8F862
-:106F10001B19E9EA6F1B01F6EC2AF9671FF3EFAFC3
-:106F200075BFFD187C2FDA9BF7DBCF419EA4EEBC2A
-:106F30008AD44537CD942779E8BF601F89B6F1DB45
-:106F4000200E5BE1B5B3FBC0CCF96BFE736047026A
-:106F5000A51AC138E079E25D43FB5BE3FC8F825EFA
-:106F6000E2221786A0BFEBC7FB85C687DB2EFC1687
-:106F7000BA575A5D304EB47B484DE70F2FC3B8DF88
-:106F8000F79E47E1B7D3759252C0FC6E5B817E9D40
-:106F9000D475BF2A5BEFF4D48FC823EBA9940ECA33
-:106FA0006857C3529C37DA3D65E905467BAF3BE73E
-:106FB000995EA0B3A3350F5F7813F41EC5F7407830
-:106FC000EE7452FF46BA26FF4685EF9F8D4F40BEB6
-:106FD0000EBF250773DD707F959AD8A7B0FB7D4B58
-:106FE00022AFB00EEE534A86E7F98957CBBF28355A
-:106FF000DD7365BE97A8A198C155CCE7E9E7F75DB9
-:1070000095F3BA389726E271B53359BCF969531C28
-:10701000B3BCC0C9DA679596039D1ADC12FA4F0D0E
-:107020009264D84FBA38A4A41CE6ABF1FECB21364B
-:107030009F8AE7EB10AE14D33ADE52C0BEB7149469
-:1070400062092B7AA0B74D96A3E2735201835FF8D1
-:1070500051DFE39E99A33123BBDF3363BE1FB13CF5
-:10706000AFAE05D48379DFF7D5DEEE99395A1E75B8
-:10707000FF17F01BDF27C2F7730B8CF72086E2FCAB
-:107080001BA7403CE24FB217CE9B98E7FD4001F3AF
-:10709000FBD7F3750BEC2BC17AA40F2FBB7FCFF07E
-:1070A00014CCF23D807855285E29BC211BBB0F34DF
-:1070B000FC21C171FA2FD00E407D944FC5F3150D00
-:1070C0006EE280FB82C2C32D181749F1BB26C2BDF8
-:1070D000BE295BA43E804EA117AC0A093829BF34F3
-:1070E00016B891CEEBC99A0370BF49E296AF8907F3
-:1070F000D713AE892ED0477349D438E7937C3ED35B
-:107100009EF328B02E4BB447BFCFE1493E0FAA1FD4
-:10711000D6C13CC6DB8F8D903C11FD024B5BFCBFA2
-:10712000768BE15CB3284F644E68047E1DB580F415
-:1071300010F7647C7A83EA7B06FA1F7554C5FD8AD2
-:107140006AA1A7E75A08DC3B7A17679FBBB6B0FC79
-:107150007572E9CA1559F8DD04FB27B07F50BDC42C
-:107160001984FD84EA6637DEC7471648B8CF51DB7D
-:10717000FC9E0FEAD52347BA50BFC54B12DCCB08A3
-:10718000269FE933859C14FC22F349D1FE6772FBEC
-:1071900020D6F7D41EAC8FA778AFDEB2F5009C8F57
-:1071A000F87FD4F003DD3E96FD1FFF90F67B073598
-:1071B00052CB8BA154C82C8CABA7613FB7F37E0296
-:1071C000DF12E9A43D32EE1DCD6FE17C3EB6928028
-:1071D0009D3293B5940D6D7D3411F75B457ECE0CD9
-:1071E0007B6319D8B973B670119C9F3AB7FF2F8390
-:1071F000601FFEB31F5D70C2BEFCDF95B0139E9F83
-:107200005AF18113EEC5FB6C05BB3FEA3E6E3F04AD
-:10721000BEFFC4F5825AE86B01BADCBFF2F268FD2A
-:107220003D3864792AEAFD854119533A845C2D7E04
-:10723000291E3C9BAEFAD29DC986BAB0074B634863
-:107240005DB438A1A590F1D1C21D5B6D035418DF68
-:10725000FF118C7F0A1289295D4EED71A2DF28E0B3
-:10726000A9DA31DC067EC6DF9B634808D62F4AAB1D
-:10727000959DBFD4264B941FFC9CEE6638DF7C2383
-:107280001EFB9BF734D33FB3E958CB295EFDCDEC11
-:107290007E4BF33CE67DA696F7A3F89EF704B5E88F
-:1072A0002AFB7E05A59B7FF9E3984F6D9EE7EC8056
-:1072B000F93E4B0DF55F35A7EF9CB5C6F7D5CD4F21
-:1072C000623F7389BA1EF206E7359ADF577E017E68
-:1072D0004CB5293FBB53E8A7D1640CE8A783F6CC93
-:1072E000C468E73045D9B1D285CCF9E54A3B96A7C9
-:1072F00056122C5B0A18DF2E697EEF11E09F9ABDB3
-:10730000BBF0FEA143C15129D7D34F263557E27EAA
-:10731000E124BE8F7C6FF7FB34E30A69FB890ED34F
-:10732000F9673EEF599C0EE23CF42C986F113C57E4
-:10733000BED1CFE7FC914C07FA43853CFF660C9D1C
-:10734000977CEDF312F311F313EF97CA94DFA2B415
-:10735000177CDE52C0E216739BA635F4A7A858B37B
-:10736000FF0B5C2F13D37D7A13EC4FB6F27C33C343
-:107370007D79F4EF28C8AFE0B76AE2C5FB43CD7C66
-:1073800025E84C1CD600BFEF18FDF82E7E6AFE09DA
-:10739000E245D01B6EC6D3DFC744F9CAE037533E7F
-:1073A00032D4E7351AEB67AD6D1920EFD5A6DF476C
-:1073B000386BCA2F11A5A7D083F23757D5CAE11C65
-:1073C000CD3CE26B6079B8EC1CDE29A5F1CD1F82C3
-:1073D0001C363139F83BA7FFB6425F6521DA2FAD85
-:1073E00008EF415C9D2EC345BFB3D74B2E90AF39FC
-:1073F000F5C3F13E9D62A2617FF7F6E0872D296417
-:1074000074A8AAB3121B359E55740CD073557B64B7
-:1074100071CF95634A5FB8B785D163E913BB6CE957
-:10742000B45C5057CDFC8320931B718FB4E03FA117
-:10743000FF17AD3F80EB70BAFE30C8572D9C8B28EC
-:107440000239363DAFBB19E9506BF213AA057F7ABA
-:107450008917F8D3FF88D30EE7AA7A9B37E91E5F16
-:10746000C1F8CBF923D9E83F9E57D57EF09D3F81E7
-:10747000DD5B2F29FE31F09CE20BED5478553CDEAC
-:10748000E37BAC53262ADE37E21F03E7DFDBFE3A5D
-:1074900008F76305BF8AF9D6DAD723BFD612E3BA55
-:1074A00072365DC040DC74F6F664CCDBA2FD17EDED
-:1074B000057F63BB15FD8900599606F74CF81E63DE
-:1074C000F7D056ED4DC2756D553DDB6FA9DA91844D
-:1074D000E766E9BA12EFF716F438563FC1968EF414
-:1074E00072E33D5964AF91CF059DBAAF0B4D745A0D
-:1074F0007BE0CD34B5FB3A5147A7F61EE864B89F50
-:10750000714B21D78F9C4E6405D73F0F1CCE867DD3
-:10751000A6F375B15E39CA7AA3EBFEDEB9D7637EF6
-:107520009988C755F417BF27E0ED0B74BDB07E14E2
-:10753000D2CD4CAF8A7FCE41BA90BF3A09C469EF31
-:10754000CD24F74FA7CFEF9798BCDCBBA6B202ECD7
-:10755000F9AB85CCBFFA33D55B5A2E5D0753BDA579
-:1075600051BDF501D56750FF70651AD6FFB252C5FF
-:10757000F293957958B673BF5FC81165041BF8592B
-:10758000AF73F979BD50AC971E4A03D7A2E29F1F93
-:107590008CB240E83370DF8CB24184DCAA19EDE193
-:1075A000CCDB8DF6AECDEA2A87F3BC8127D87D6887
-:1075B00055BE1B0CDF1345B5C13DB8246F44E439FB
-:1075C000CA9B6A83F3E8774D4E367C3F63ED0043F8
-:1075D000FD834295F995159986E777CF2A30D467D0
-:1075E000F3FB5C893A16E5E6219E374AC8584617F0
-:1075F0009E8FF24DDD987EFF46E1FDE61D2BBE37E6
-:10760000D343D075EE6699F8697F733653FD4541D3
-:107610006C6FA474A2EDBEFAD809674748C38E11F7
-:10762000EF8EA5F5633B58FEEAB1FAE49F82FF7442
-:107630006C476A02C451FD0D32F7335C78CF99E88C
-:107640007742FD2ACC53991D8CC17308B35B02CFDE
-:107650008B3AFCC400BA78203747E5604842FAB15B
-:1076600038C0CB3118C73F45FD3A571FB83F8CD4BF
-:10767000430907A712E9FB7FB4A60641AE2BFE29FA
-:107680006B69C04F2FC7F27D1A09FBFBF2BDEC6D91
-:10769000EB90BFD49D2194DF185C2FCC6963F3235A
-:1076A00052F100A0FFA924A2255120962EFBCBDF8A
-:1076B000144AA78539AD45704FCC2C7728F54EDAA2
-:1076C000AEA3C9CAEEA5A7FDBA687DE9AF63B6321D
-:1076D0007DA2F5837B2222F80C16C1BCF3FBFB6272
-:1076E0008652FA7D393F58847A6D452ACA9519EF3A
-:1076F000ED363FE23700722045F46444CED8FE1BDD
-:10770000556EE9A06FE658BD7DC15EB5AFB7B27BDF
-:10771000E1142D611A9E33DD8D7CDCAEA8E530EFDF
-:10772000F6B56EBC4F478C5BB55ED6D87DB8942F4E
-:10773000E1FB0DB21FEEBF11762BB056F2C33D39FF
-:1077400066BE79F0813198F76EF67F457996CAAAC0
-:107750005FE7472CDA2FE3EF5890916DCAED86FB77
-:107760001DD9EF7D10FF58433EEA12CF1FFEE6B051
-:10777000A05F9308EB8ED34765E4B3D39EC6D1696F
-:1077800099905E7270F4BFD1FA57530227E15CED15
-:107790008383FD2301AF8B2DEB3360FD74AEF9C401
-:1077A0004FE1FED82F7F63F5C2B08B5E5E3818E3E1
-:1077B000F4DCFFEEAEB7C4FDA45A3ADC17B458DDD2
-:1077C00089765CDD211136FF20C229ECBA6B9384E7
-:1077D000F7049D18E55C07EBE539A6735D27F8BD56
-:1077E00015E543993E11F6FE315E9F63617C4DDEE7
-:1077F00090D8BD52FCF71E843D10FA5AE8FD19439B
-:107800003D2C9EC1F535213B516FCD87DB94E83C83
-:1078100097BC14C3E2CB2A5DE08FC67B4BF16FE3CC
-:1078200050A62F16D97EF30CC852356945F8BFB45F
-:1078300006E7B7BAA1FDD6FA3ED8DEEAC5782BB77F
-:107840002F70AD3DE8A56A2E7F4B1B25BC1F8970AC
-:107850003B398FF74F5EB246EC86278A7D31D9954A
-:1078600079DCAECE23A6786DA3D1DEF9E2D9E2773A
-:10787000111D17EC67042EEA3F53DCCDF707DF9CA0
-:107880008A704BDE601438AA493804F7442DDDC1F4
-:10789000E2D766B8CCF3B85638E77BA74D4C1AA9A7
-:1078A0001BD704B7C037067C757410789F1F60F82B
-:1078B0009CDFCCF6033EE7FE1AFDC338B399FED534
-:1078C000C43715F2F3AA3751FDE98EF083E08385C2
-:1078D000BB82B85FF115694C70503958B279D78CBA
-:1078E000EB54583FBF87EB90597D42D99624BA2E6E
-:1078F00008BCFD4CC5A0DEE3F5FF2A3C117E6F36C7
-:10790000B6A37899D7C4EEC5D67DC7F3D00388AFA8
-:107910000581800DE2990B787CB037386B1576EED7
-:10792000BD7778191EFFD57087861AFDD8887F9499
-:107930001D75BDD5E517F5628F3FB58606813D0EF5
-:107940000F52D01E7DA378FF529202F6391BD70D3D
-:107950003DE9DBF9DC2ECF033B4DCB939B5FC17B35
-:107960008F3EDFF40AEE8FDA7E332F01FCE5939B26
-:10797000E7FC14CE059CDC3107ED72F52F845DF633
-:10798000DBF4F67EC2E6D9BFFC11F0E94BB118D7A3
-:107990009FDFE2E7FE38D57FA0173733FD4736314A
-:1079A000FD580DF6AB10ED572E7CF7C87C7F2EF0FE
-:1079B000BBEE39DAB547E6F8C7607BE20AF1FB7B3C
-:1079C0004360BF847D1576F7DD74FFD9A16017E4AD
-:1079D000773EFC019DFF99DD32C67496CA5B33E0A9
-:1079E000F7507AD2E3DF1FDF962E7CBBAF01DF5565
-:1079F000806FF48718BE8FAF65783EB19EE1BD61A0
-:107A0000476602AC838FAFCD443FE8F88E6CC4F775
-:107A1000DC7514DFE807AB463F682DC537F8FF80FB
-:107A20006F3A6E558BCAF1ED65F85ECBEDD07A56A4
-:107A3000CEED86D7C07DA0571EF9558C17EFA18ECD
-:107A40000DA5C23AE5D42E9940DE42979FC4FD1998
-:107A500081E77F90C6E7C1AFEAE6DF6C882110DFDF
-:107A60005CF8AA13CF0D7D2995F403027434FE212E
-:107A700001C68B8CDFE5D7788A46E9FC9A6BA44F68
-:107A80000DF1615E7F4DF31F3E06BF1EAE1D827578
-:107A90007F8DB82F62AFF1BE0849059D86E747ED9F
-:107AA00076E08381E6FB34FCF8FB3017B3BFBE6F92
-:107AB00019CA733847BFBF521B17B2423C2ABC4B8E
-:107AC000427A2F7DA824A184C0BE541DC231BE8835
-:107AD000AD2B244DC338630CE59B38B8AF0C2ED1C9
-:107AE00085E7AA8BC51DB7D0719D1178CDCFA78230
-:107AF0002202FBEE881EB7AD2B627EC052D982EB0C
-:107B0000902536B61E11F921B7F2F7B716B175C92F
-:107B10001D452CFFE21C2413D17ECF6D88E7F9CEE2
-:107B20001331FE29EE0B5004DE5CCA59C3EF27F077
-:107B3000F8C2DFA00D85736E0C8FFFC24FB6D0F672
-:107B4000F7F0F6F734FE09F7E5E84AE639B0BFF793
-:107B50002E8FF1E2FD8C701F1CE5BBC7E3D83E0AF7
-:107B600049495440AEEEE67AF69EC6277D608FEE18
-:107B70006D8CD7A0A4E304088FB78E847DD8FE3621
-:107B80008CB7CEB2B7FD06DCEBFBD34E3C6CA753F3
-:107B90005B6561FECBAA3E04F36B8651371EE2B7EC
-:107BA000F4D59E2BC957E31F633C7909C475AF27F1
-:107BB0008CB1C6225E0D758A5FAC3714DD70E7A606
-:107BC0007184BC4FD4A140EF25801BE087D9891870
-:107BD0001FB815E2CB7DA05490CFA62B246061E5A1
-:107BE0005A07DE87C1E2CD53F9BCEF184B428974C6
-:107BF000BEA1B78821DE7D67C812CAA574B8550931
-:107C00001D00BEB6D8552BAC0F7C155231AC9B97DE
-:107C1000ACBE36787F5E547EE7A681B46E61FBFF12
-:107C2000E11F48787FC93D54C8813FEF53488B5CC2
-:107C3000CCE807FC57DB87DDC71D7E80F1B788B332
-:107C40000B3A0DA7DDEBF17B0F878FF6B33601DA28
-:107C5000DBA2C797B673B9107EE7622EAF8B05BF64
-:107C6000ED30CAE961212FE0E752BCDDC3CB9EF8BD
-:107C7000FD20E7F7839CDF77168975F8B58DB7345B
-:107C80008684F4BFD724C6BD9597A122E63F0B3862
-:107C9000043F131E9FB250CD017CD4DEB806FDA672
-:107CA00005A67831D1C7B1E468F52EFD63B902A508
-:107CB0002D3C17E0916E8AF5025FDF63DB99CDEE14
-:107CC0005F317E27F6716791562BBF8F8CC5B9B88F
-:107CD000BD2A931D784E7F96C4EE5F3A57E20C584A
-:107CE000A8BFF829BFFFE47C1D3BFF3AEB07EC7C03
-:107CF000E7BD898F4C05FF7056824D81F253FE3BE4
-:107D00004FF79356A7DB1DF14F1A4A647E1FE8BF59
-:107D1000DD09FB196B40AFB0FAB3DA388C2AF1FAFF
-:107D20008ABFC0FBDB2F513EC0FA8FEED4E8B8E724
-:107D30000EF3F7015A87FD92C7043FAFC6FECE3D52
-:107D40002DDE37B0FA13E2FD93ACFE13D13FAF6FD7
-:107D500030BD5F657AFF7356BF50F4E49D70CE71FD
-:107D600016DFC79975BD847AA518F88DD277D6EA43
-:107D700010E27996E5202B4B4908CE5DF4F6DDE064
-:107D800061BEE2A254B8D7A2DD09F63B77B886F50A
-:107D90008143FDFF04BBB6689A14B081BE3C1ACC87
-:107DA000E1FA3D6ABE7631E7DF415ED69FC037ED2E
-:107DB000276658EA77EF6707C035CAD08FEBFBF428
-:107DC000B3BC3B3CE9DFA79FCF4CFD08FFE8E16275
-:107DD0006D24F44726DE6088FB2DFEB13711FC2BA5
-:107DE000F22EFB7DA5C5AB77668CA0FD2FFEEDBE08
-:107DF0008CF9BAF5784DA74C34AA8F6A3B252CBF75
-:107E00003AF0890DEE1FA8D973C0565E08BF0B73F8
-:107E1000C0364107D71291874ADA94E93AFB7EDDF2
-:107E2000300BD71BECF76516FFF634EE772EB6EC69
-:107E30003CF90B88035DCFE272E6F9B979BBBFC1AB
-:107E4000FE7314FF7DFC30A68FE68FD46E1A06FBFE
-:107E50007B80335A4E58137D1F7F2DEF6F561CD3F6
-:107E60007373463BEDD066D451FF1A381F367F8BB3
-:107E7000BB18E2BCE38796560CBB6ABC34CCE2A5C7
-:107E8000CD2C5E3AAB4FEB4354899335BF7BF95908
-:107E9000FB8D844C7A9674DDF30B71483C2E8D7209
-:107EA00077E0CE890331FE85F5F9C35E7F3640DB8E
-:107EB0001FE1F7FEDF3B66681CE8873677BCC545E7
-:107EC000E5B9BC70F61A80E3DE313796C3F3921839
-:107ED00067CE6C167747BE282FF4DD07F386EF21B7
-:107EE000DEE1B7B1F897FF6D19E35FFEA2787FB4CA
-:107EF000FDED591C0F6B8631FFE58885C2591C8149
-:107F0000438C4F1D96875A697FEDABD387C339BC2D
-:107F10006D8525AB112F7CFC6D85FE5AA88BF1E990
-:107F2000748BE0F9B5C2B184C3B11ADAD27E7CE3B6
-:107F300028BFE9D68DD327C61BEAB74F4E269A3EF7
-:107F40000E7BFB00437DE6AC4CC3F777CF2D30BCF6
-:107F50009F12D33AB2EE3BF8C1B54E671CF8639F4F
-:107F600035FFE3A37BC0BF6B92F1776A16EEDFFEAD
-:107F700011FC6ED3793AE1640C86AA180FFBF20863
-:107F8000FB1D4EEAD729FA7D9D33A4F519D807D5F4
-:107F9000ED1744DD4F15FB058B5D2D98C7F7BFDD51
-:107FA000D7D9368CAF878B21B519ECD2871887AB20
-:107FB00071B0799DD9770C7FD702F20AAE503EBFDF
-:107FC000191AC2BD7A9DABF0F7C226F0DF139E00EE
-:107FD00097B0C3BA60E0030A9C6BAFA525D897722F
-:107FE000AAA712299FB41E2043F7405EAFDB897910
-:107FF000174B3B6FC338F791B840E103F4BBC56B37
-:108000002BB15ED3198FFDFE596E2DC7FCEDDF4BF2
-:10801000B89F3065C0BDAB017EF8FE413ADE94DF0B
-:10802000DD5C0178AAD9C3F233A6C8EF8F847E96AF
-:10803000345662FB29323922517F21B1F31EEC778D
-:108040000AD87A5A97473BD781FD956DA19C7F0747
-:10805000BD6273A25EA9ED8CC5769326303BFD36DA
-:10806000D71BD636065759E7347C2FE8DF3ACC6366
-:1080700038776F4D6D52E03E4F6B9B84DFDFD259F6
-:1080800080A598E7DB79BFC2DFA1B2A67E530EF9C7
-:10809000996FA7482E743F4C7AF742DD98441245F9
-:1080A0002F758DD3C9F29D633A59FE73EB70ED24A1
-:1080B000C8D7D4156D0AECEF1087DD05F89A3A762B
-:1080C000B83A5F274FF2C1BB6C4017EBA6F76C6064
-:1080D0009763683941F77EA9C8EF37E9E58E6116E5
-:1080E000EE3FAEC2F90A3B438EEC457EBC4F9C8FFF
-:1080F000E5F2F209FFBE0B4FC0EB40C75763703D7E
-:10810000757AB8FF0AC0DB5AC27EAF8628AD19B0B7
-:10811000AFF2AF829FD2D92EA1BFDFC67EFF77AC70
-:108120006A81FD02C52BEC0B935B318FFF017C0252
-:1081300054430080000000001F8B08000000000076
-:10814000000BC57D0B7854D5B5F03E73CEBC92992B
-:10815000C9E43D210F4E208420012643124208C964
-:10816000242408486080AA840699208F8804424409
-:108170001BAFF6CF842410042D8AB7372AD2019181
-:10818000A2D53620B6698B382168E3B5D7467BDBAC
-:10819000E2ADB5F151048B3580D72FB62A77ADB556
-:1081A000CFC9CC9924886DEFFDA37C27EBEC7DF63D
-:1081B00063ADB5D76BAFBDC37ABB184B60EC163B54
-:1081C000E33F8DF18C253176719A8E31F8F5572287
-:1081D0006BECCC866749499F3B8EB1EE7BA64F176F
-:1081E00065C6AEE04F0954711AA81EB30F7CCE725B
-:1081F00019DB7C3252BE4F60AC3216DE013CF0829D
-:10820000D17F309DDE33210E9FC68302946FB60D61
-:10821000647A2C8CCD79D11C6053A1DD17CD1283EB
-:108220007E3A72BDF1CE787C3FB15CB031E63E6102
-:108230009418D41B3BCD9DE0CC83364719AF3A9EB2
-:10824000F027633E3EBEF2593A96CFD81D26FED99E
-:10825000DC25822F2A8A316FFB7CC660AC3583CB4C
-:10826000189BCED8EAC14882BD7BF8FBCBF5897359
-:10827000198CFBF2BD306898C7EA7B8529C7615E1F
-:108280004CB63A27001E2A93576E6330CE4A5147A8
-:10829000F3AD9C1CED6F81AA1B07A3E9FB4A91F586
-:1082A0000A318CD50DA653FB9B0663E9FDE64133ED
-:1082B0003D570F4EA6F7C64191B9015E33283037BE
-:1082C000C037CCB1FA7430BE492E6F05E2A3B2E5D7
-:1082D000FA79D88F775B52AE17F0B1E8DE7EC90429
-:1082E000E3621683FD49E86F51418E639D2538EFA7
-:1082F00096EE2A1822B41BE731B8E1FD1A78CE09B0
-:10830000295F0BA8EDB42026EC731360DC8B5AD3E5
-:1083100075F7B160F90227CC07F1CD9AE9B948ADFC
-:108320003F0AFE6728F5575B021374D09EBEDEEC51
-:10833000DC06E3BA1427CF45BC34ECE4F86BD07B01
-:10834000E65861DC0D8F084EA00CBB35DF6A623049
-:10835000CFFC33F5066F76B0FFAAC1A94C063C2CC2
-:108360001BCCA067C914EF72C443CDE04D0A9DA693
-:10837000D293C9053A1CCF56A4AB8C032AE074569D
-:10838000C6F749FD8CC46F41FF9FFC524FE5796EE3
-:10839000DF2D381EBDDFE83C00E33967F68A48DF91
-:1083A00073A9CCBE1786784ECF7C76A0D7AD1D22A0
-:1083B000F341FB6BE0E985E7B968E68E76213E6123
-:1083C0009E59BCED2BF0EFBFA53D696C3CD0B7E1E9
-:1083D000776F4BE318BB2DB36F6A00DAAD2E0DC477
-:1083E000DF0CED5E38A477FAA0DF8DDD6FE4EBA043
-:1083F000FCC37477221381AE63BC0DC8CF1B96FA01
-:108400007FA807F8F6FB9FB3CD9483F8EC94021392
-:1084100024F8BE13F0E8837175EE16E7F9895E2C37
-:1084200072C994205FAB7C1CCEDF1B06C7137E2E67
-:10843000D71BA71C47FE057EC5F7750A9FDF8E7CFC
-:108440000F4F7DFF7C852F39DFABFC5C274165F842
-:10845000AECE12E5F7C17C2A7F04FC0728DF747CCE
-:1084600089A714F92E4B704E80C746659D548A0724
-:108470001F2844FEFF38CED902EF7FD2E400640506
-:10848000F9BF627009D58B1AFC26F5A7F2BF51E13E
-:10849000773DF27F08DFC3778CC177F7E5789F449B
-:1084A0003C95FDE06FCFFD17BC5A2005321F8BC3F2
-:1084B000A795F827B80E4CF627D3691DC8EB42F8EC
-:1084C000483C556590015FFA87DFA1756084E79CA1
-:1084D00090F24DC8D7D988997E69A935F8FE6927E9
-:1084E000977FD7CAFF1D0AFFCF33B2551E6C4FEAE4
-:1084F0004B0B6DEF7C4ED90B388F534E81B7F74F36
-:108500001A37E0C984F885F1BB915E8B0A64DD7D82
-:10851000E9D88FBA7E399F7CD5F87FE4BC3679FFE5
-:108520001B45DE87CB7706EDA17CFFF885497E945D
-:10853000FF6F33D00700FB4E44CA4F2AF29FF4432B
-:108540004494FF6AF27F5DEEADBF413C8D20FF7F1A
-:10855000FB8FC87F95AFD4F5A2AE0F753D84AF1FDA
-:10856000753DDCB0CB19F52DA41320E6495C3F9294
-:10857000EF199C479D1C9983EB525D479B8E0BB472
-:10858000CE86E90565DD04D789564F8CB64EEA9450
-:1085900075B1565917EA7AE8113BF716C277753963
-:1085A0005E634EC8BAD8782C5C2F8CCA570CF96A17
-:1085B0006D5C3D43BEAA8367285F1947590F969C9F
-:1085C000AFA70FFE7A8DFC3436C740EDFD2FF2D3F6
-:1085D000D89C91ED0919DFFFB3EC89CBF5BFCB95A2
-:1085E000613C977341CEA607F9ED865719B717C6B8
-:1085F0005B9DC83FBD117C9EBD86547F0BD6BBC220
-:10860000EA118FAAFE5F8B748F0DF269B5CB5B8E7A
-:108610007456E9DF1BE1CBDE927DED7436C6F519A9
-:10862000DCD948EF3E8DFEAF1B85CEF373BE9EDCDA
-:108630009B91736D745E91F34FB713D78E4457E6D9
-:10864000E6F640902EC66564BF0540A109A3D35548
-:10865000DFC1F1AEC26D0149D5B7B1A86F815FD658
-:10866000E5FC03F2A7720EFC3A06C11797BB8B809C
-:10867000EEDF5160D6B31CD7E14D056A79A0C32D5A
-:10868000A1DC81DF0BA9073733117E39ECEB3E53B8
-:108690000EF56FD83B54EEC3F28AA228A53DE6162C
-:1086A00058B07EDBD1936776D33CF6F0F5EBED97CF
-:1086B0003C5342E05C80AD21704118BC8FD7B74974
-:1086C000FDCC4EEDF8F97A85F60517E71F4F883D8A
-:1086D00002949C1B8DF6E471C17E1FD07F45D1C7EB
-:1086E00006A45770FEAF2C77A780BC3C2128F07FF2
-:1086F0009CC1F9AE38CEE11F1C7DBDC32729ED0119
-:108700009E372A68D6770A6E11DADD5820F8C7A599
-:108710000FC7F30F86F8561D07A860EDF7CC10F7CA
-:10872000F5BEC7F54DDF8FA3EF03C6AFD1FFCD4533
-:10873000CCEDB70CAFF773558E7E0EB0DA3EE0721B
-:1087400019CCCF9F3DBC7E8F52BF4FA753F075B65B
-:1087500003F9A7CFA0E2F34F0457300EFFC7D13F74
-:108760002DF771BE65EEB0F95F6DFC3FCAD1DA0B33
-:10877000F8236BBF0F5C0D7FCF0FC39FC23FB55A6D
-:108780007E8A923CA72F433B5171821DEDE24D1E24
-:10879000F36EB4FF83FC3140FCD1676643FCACE56B
-:1087A000FF8BCBCBB3C9FE51EA5FEE40F9E6D10DAA
-:1087B000D5E7EB41E52FF83E0BF8094D64FCFE834D
-:1087C000A3973A7CD9441F2A2758BACA7AE80C835F
-:1087D0008BC2D68FC2FFB47E51CE037E268C20671B
-:1087E0000C2E8EDF8F04B61CE5645F19B713FBC631
-:1087F000F167A64B20BCD95C1C8F09CAB32F220499
-:108800000F29413AC34F00FD909079139EAAE2D4FC
-:1088100079C7562DCC80EF6378B9EC8A7AC4971269
-:1088200084C3DB1BE78AAD42BC04DB8F7E13E552B9
-:108830009582B74C57CC9B0A5F09B82EEB884180D4
-:108840002F8E0B3E11FD04E48B11E6FD97E17CE5D4
-:108850000BFBDEADBFCAF79F0C5F97EEB0EF993E02
-:10886000F7EB7CAFD06D61185DE785D1B53C0CAE00
-:108870005661BF46FEA9727175D7836D09308FDBD3
-:108880008F08A86642F839BD0AD7E7ED76957FC70D
-:10889000BD89FC1AE4E7F184E7A59DAA3CCC78C425
-:1088A0000D745B82F2B030082F437941F0842AF7CF
-:1088B000B4507D91F908CACF9BDBD5FA13A9FE8A83
-:1088C00056B5BD2C82553A32DFA42AECBF2A57D1C7
-:1088D00017BEEBDEC4F20D27F8F755C726BFE9CB6C
-:1088E000B8CA7AD81386977D61B02FACFEC35FA15A
-:1088F0005F5AC3BEBF37AC7C7718DC1106B76BBFBD
-:10890000AF5923D03AAC017E40427CD5BABC4D5918
-:108910009743F480190816B2DB34EBEA86160EDFB3
-:1089200071ACA0AADD1202BB0A69DDA8EB42CFF848
-:108930008F318ED1BAD08F222F6B5CA3F06556B8E1
-:10894000BEE5E57FC45F93D00E661ABBA047D4C2D4
-:10895000DDA23AEE796F6ECDC6972A7C7D15FA07B7
-:1089600037FC9B765EE0AF2A704555794A885DE218
-:108970002BAF7287CC53AD3FF78B2B22F6B7D35575
-:108980005E7508DAAF2E0B4CA8877AD531FC097AD0
-:108990004D44BDB95989C7CC7D41F4A05EAB8E086A
-:1089A0004C68C80E9927EBCCC47976DF23127D7C06
-:1089B0002D401F8CAF317030C135EB8E8A6A3C0C74
-:1089C000F57BEE111B518FBEDD189B80E33FEBE280
-:1089D000FE424FD4D884B5007747AE32C850AF7B43
-:1089E00047053D4F89EEED03B0D6BE7F6C599565C6
-:1089F000129647117E9E702DAE6A06BE3EEC92E93D
-:108A00007B6F8C3DA10BEDE7FBF4EC4919C7E3DC70
-:108A10004F7C73BF3107FDE79AE6C909684FAEFE88
-:108A2000D7257393A0DEEA36BD53A07A6C2A8EDB7D
-:108A30007B5F8501CBD7B42A4FDFF5F47CF1CB27E0
-:108A40005A6C507FE071C17910EACFFEA4F3D5A92A
-:108A500000AF6F1FEF44D29C1CD4313BF4F36EC7C0
-:108A600044BF08FCF89EB9FEE545BC3EC3FAEB3FA7
-:108A7000975F5B948BF545FB36A87F16DEA33D7CA4
-:108A800076A77850C071D9AC11024CE9EC17F26BA3
-:108A900068D742B97D1BBC3FDB765B02DA596705BC
-:108AA000D926C0FC7B8ED55439805FD67718157ACD
-:108AB000D624D5C0FC6B7443FC42FA635D34877BDB
-:108AC0005C35554F227E1F9968433CCF9AEE3EEDB0
-:108AD000023C9972DD2FE1F33D33D7532F7E29AE4F
-:108AE000427BFCE717562760BCEE57CAFA3939B803
-:108AF0003A617588BDB3EE2389E8FEA241DE8AE3C0
-:108B00007C312255407F19E81EBB04D6EF1AC5FF01
-:108B100000FE6D7C6E04BBE76997487CDFBD2BBE11
-:108B200048D6F0713DC94FF21B00EE3FB6F1111F60
-:108B3000C8D7F78D8DEC3D5C7CF742C14C78F69838
-:108B4000297EA57FC6EC37A763FCD33D17F9993979
-:108B50003A33975A43D69D52FF0F3E2BD5FF03D48D
-:108B600047FFED0FBEDF5B9965B81DBFDE66F5A15F
-:108B700031F181D52A211DDE969ACEDE0DDFAD7B47
-:108B80005C4F727FDDE3F1F70EA0BC017EC1F858A7
-:108B9000F8BCA64CD713BE465D87BE6F6BD721FBD2
-:108BA00036C9EBD1D6E15F8FDD5B75C832FA3A5C2E
-:108BB000AFF829731FD77B701DADCFB34A0CF447B4
-:108BC000D9E32F3D89FCBE7E8BD9658481AF7FDCE4
-:108BD00048F4EAB75A7D7628F7DAAC52343C4DD3E4
-:108BE000397DAF9BCED7CD1C914926173D5B314EC9
-:108BF0007A09C6130BF0F9C6BDDF9D01FD7CC8FCE8
-:108C000037CD00FC5D4282015E2E1D17297EC824EF
-:108C1000B75409F2B19671B950F7CA738652F8B5D4
-:108C2000B67EFD42F4EB6EF3EBDFED577CB62BCA5C
-:108C300034519E6EE6AF40AF6ACB37B3DD17C5A99E
-:108C4000C4C6065C8F759D61E5F5D77F80F197CD31
-:108C50004C7AB75F8DD7C238E4E9D6B8B39100B883
-:108C6000980B30C42ED5EB33194C71BD05D615CCFD
-:108C700077CE3E81C6BDBE51F41BA1FE9C581EF7A7
-:108C80007DBF09E83F91E6EDB303BCFE61AE67D658
-:108C900033C16F825FAFDFB745C2F5D081F205E324
-:108CA000D402F3207FBF6776A6A1BFBEEE7133E189
-:108CB00077FDFEDB7EFB087CD7DF5C1917EA1FE738
-:108CC0002B7C01ED33534CB09D0F9ABF9D86FC3F2A
-:108CD000E77BE0E7C27CD747B31F56A523BD92D2FE
-:108CE000644BB0DEFA6DF764F27AE027C3BC6B76B2
-:108CF0008A340FF6BC91F41EAC7507C965059F6BED
-:108D00005A5F3118B2514EEFEE13A1FEBB008B1625
-:108D1000C2974FC1A301F1B50ABF4DE2DF38F2158A
-:108D2000BB5B2639E2C5F955EB84554B49AE0F18AC
-:108D3000685D4FE7F1CDAAE9DC9EAD4973DE427173
-:108D4000E4078C4E9453F823AAE300BFAA4ED7B78A
-:108D50000EE3B9ECC7468A8F6C6E35BBCD36F23B5D
-:108D6000DCC7707C12930C808F8D3297176B143E8A
-:108D7000DC2C2FB91EF906CACF48B8BF62E572B124
-:108D80002E1AF0CEED54B70EFAF9187F1BCFDB4D3B
-:108D90009A1AD2BFA0BC8776645BB0DD5E1D6BC73C
-:108DA000380BD69F3415F1187BD3721CDFB322AD7C
-:108DB0006798FC030568E73D2B4E47FFB66667CF13
-:108DC000DC0E848FE6D8B1C99A1FFE9AF4C6ED0A6C
-:108DD000FDFBD1DE473D02F051787E7B3AD7FB5E4A
-:108DE00091C77DBEADE049E503B5BC6EA79EC7DF68
-:108DF000DB8C64C7D435FF8EDAADB3F625A0FCADAD
-:108E00007B5E9F8F72DAA78C7B75736AD119E0AB9A
-:108E1000D5FA28BB00AF36FA2A0D086FDC23101CE8
-:108E2000FC2E3E0DF9F4CFAD3FB121FFBC670E4CD7
-:108E3000407D34B0C5EC3C881350E26E7F6E9D706F
-:108E400010E3336BEC7D5601CAD76C1D1F83F2FB18
-:108E50006D7BC080E56F77A6EB1076DBED4508BB38
-:108E6000A56904FF1944198F2B31F29F37099CCE55
-:108E70001B9FE9318C83FE9E54E6FBD1B3BFCE44E9
-:108E80007D5597D697897A05F8203319F1FCB440BF
-:108E9000FA78D333A2DB3C35C8079B900F60DD6DB9
-:108EA00050F860D3F19F7C0BD7C326A4BF6B381F4B
-:108EB000019F9EA6F7C70ECC65FCFBD3C827AA1E50
-:108EC00003B8558FF1348302433F081F9ECED7135A
-:108ED0009497F3725F36C953D66F40BB737397DEB6
-:108EE000D71FB2FF331A9D7B143AAE6E3692DCED7B
-:108EF00051E6DDBFF3791BD2F1A3677B5EC6FD921D
-:108F0000BA63A0ADE511D6858297CD88071BCD83C6
-:108F1000EC8BCD386F5B100F43FCAFACC7CD8CCF63
-:108F2000539DF76649C1835AAE7C7F5AE19B8D4CB5
-:108F3000C1DBF1897CFD29EB0DD733CA55757EDE87
-:108F400018FEBDCAA7E715BDF08632CF8DC017CE7B
-:108F50006CE21FB741951350F4D1D10314FF51E9CE
-:108F6000A58EFB6F417DE28E8E09D2B15FC76A3B51
-:108F700047889BBCABE0EF9DB6C4B42EC0DB9FC15D
-:108F8000CF427B0AF9550AE94FE51BB5BF393F5877
-:108F9000B200E70BED07B07DB5DFB77D9112B6F3F8
-:108FA00036E3EB03F913E5A7BA2EE7B4AC5C9063A4
-:108FB000C37A1F59C767E37CB95CFBDB743B3DDDBB
-:108FC000682FC0F7EE2E81E2CFEF287EFD3B6D3F8C
-:108FD000B1AD0EC1D367CAB8553EC31F8C4BA9E3D0
-:108FE000ED8DE1F1DCF071AB72481DF79C1D372F60
-:108FF000C0F7EAF8557E55F953C5A3CAA7ECDE7849
-:10900000B26BC2F995784DD5ABA246DE937EBC3EDD
-:10901000E5A2C16B19FE3E1C56EDA1F7304E83F25E
-:10902000E329D14FF2A3D5713A2344CFC38F2554FE
-:10903000EF346FB9DE5E8AFBAFCF084E347942F46D
-:10904000CB6E2944BFA876C12DB9E3B8BC8F739FFE
-:10905000473A6E3CD737D72607EDD0D99F04C428AE
-:109060008C4B1D4F7785EAD38D174E13FFD7B1BEBA
-:10907000EDE847D5ECFC75E50CE4F3A7F4B43F53F9
-:10908000D3566140BBFEB6276FCD473E7AB77D3CD5
-:10909000C9F5F387F2A6135F317BC24DC0FF6B0E9B
-:1090A000EDBD6905BC5FD3253A49BE433BB86E6B45
-:1090B000EE9CCE906FDE33F75716A2FD7EB7684761
-:1090C000FB7DD69379F762FD59D6B1D1380FF7A160
-:1090D0005882DD5214E907D5EE7D5B91932D7ACE4F
-:1090E00017F372F97A2A197A727E9BD3D29289FB8E
-:1090F000E90307403EE3BEB241EE0C607F2F2492AD
-:109100007FB119DC2107D0FD9CC0EDB25A03332595
-:10911000B9E8BD2909DEBFA2EFBB13F5C82B775A0A
-:10912000739A7100E2E7F9ABB93DCDF70F6379FFB0
-:109130002ADED4715CAFF41FDE9EFA7D2FFA11286F
-:109140004F95F19F6F7DEA26D483E78F4C88C179D4
-:109150007FF082B91DEDA90FF45C2E0EF9DB7EFDC8
-:10916000FBA1761AD8751A18EC380D0CFCFBBED68C
-:109170002EDCC6ED8B5CAD1DA7F27BF5960951A1E7
-:109180007904E1F63BCB08DFB79911C5469037EA81
-:10919000F34213200A1835156D7AF8BE3CF28BE7BE
-:1091A000FAD0DEDF63B41B619EEF23FFE3BED4F38E
-:1091B000A21FF761D036C7F5F0FED11C3FFA91EB44
-:1091C000DEF2CEC5F64F3FB883F20CD6827D9928E9
-:1091D00084D8CD0F3F7813B2FF25A7777B127C7719
-:1091E000E908CF8B80624B98BDFC7292FC8FDBCB81
-:1091F000D76A27ABF186ED88E7C9F0BB933911CF69
-:109200002A7E55BFE945E083025748BCAFA996ECDA
-:10921000E40B4D5E7A7E2CBCF3C02CE45F6B94F3C0
-:10922000207CF6F3AEBD6232D2F978CEE7E8F716CD
-:109230005AA2ECB86EFFD2D4489B8F179AEAE9A9DC
-:10924000D2598DB7CD3EDE4DDFFDA56BFA8959F0C1
-:10925000DD494B1497FFC3F67B383DC3F340EED88E
-:10926000322311DFABF3FAF06E4E5775DC1F1EB9D7
-:10927000D586F3EA7E2CF6C44CA46764941DEDBD3C
-:10928000F54AFEC7D90E6E4F9F33451D5E88792380
-:10929000FB96253090B36BBBBF7113BE5FF7826046
-:1092A000473FC0F9C2121BFA6B7F92FA6D767CC2FF
-:1092B00077011C8FE417511E15CE63B41F5518900B
-:1092C000989C4E5BBDC42F332F487ECC1BF933EEE8
-:1092D00053613CE4F3088A873065FF69ED4F791CE0
-:1092E00065C8BF55FCBB59CABCDFCD8DE1FCADBC28
-:1092F0009F53C0DF7FB0EFB945D8DEF9437A3B8E8C
-:10930000FB2F87F4D4FE06F0CB7430DE7347B8BF72
-:10931000B3A153203FF9FC11D0D730AFBA2D7AB7A3
-:10932000216A381FCE81F27E4B900F37B8FDC4DF23
-:109330004CE14713FC7765DC707E8C669DDB111F6A
-:10934000FF285F9E095BF743FC381A1F28F8C27597
-:109350008CFCA8D27B4307DF578FE9CC2945BE524E
-:10936000E9AFCA095F19CB42BDDA6260599887E359
-:10937000D34538717D2FB1C87A01F0B02CAEBF1C37
-:10938000C569451E9793E21C9D5B87FAA5C5487287
-:10939000205C8E5CCCE5765223F234FCB3E6713B64
-:1093A00042CFEAC90F519FA07752517F2F898CF984
-:1093B0006F19AA7C79FCDB2B2418FF925931778E28
-:1093C000778253F67CCB0A09F877C9F498E7C7018E
-:1093D0006CCADBC6CBA7C5E4E9016E6E6E5D510EAB
-:1093E000F0843CF7E7B9F1C17ED476E1FD157CFF4E
-:1093F000CC64AF2E2F1EE5BA85E4F4C7C2C0D4C634
-:10940000F460FDD705F6F6CF8520DCAF676968DF2D
-:1094100059B1ADF8D19F8BF2DC917979C3DFAF669A
-:10942000AC8DF2E77CBF3823703FCC63027A2D56B7
-:10943000F86AB5C912207FBE5D7F6188DEC847CE5D
-:109440002809E9BA48E1A3C552A01BBF9FC45AED41
-:10945000674D6442EDBB123BBAFC8685C7CEAAEDD0
-:1094600001BF7CAC87F9025F0BC09E8DB0640440E5
-:109470007235C82FE1C42F3EC3765B7CACDF4C74E1
-:10948000A8B6A3DC13985777059E7591B6A918372F
-:10949000A98B4CF323DF373CFFD16964AFDB54FB6E
-:1094A000C55B40FCBED5CEE7C3BC85C48F772AFC24
-:1094B000F84113ABCF80A5B7B8AFCF26C3A02F2CF0
-:1094C0000A64E27ABF9CE6CD453A7CB0AF25A5019F
-:1094D000F8E7A36346E742A87FCEFF1CC5E1362A22
-:1094E000F6283B14AFAC7B315002F57AD3271D44EC
-:1094F000FD529CC7F5F585F440DA3D2837D2B9FF17
-:1095000003F528CF6DDEB6EBE3B1DE85A33B32D6A3
-:1095100002FD8C12F35963E8C96C30EFF9D0760183
-:10952000C07A8045DACFF5537B58CF86FA5EBED538
-:10953000C1E3EDCC837245A5974A8761F48121A0F0
-:10954000BDAA33313D8E7F12DB67C7F5AAD2E9038E
-:1095500013E011E36726C023ACEF0A0C3AE4223E85
-:1095600079BCA541E86F8D45F85981F2E686EBC1DB
-:10957000270D88F2DA7DB792FC51E58E0CFF8D2421
-:1095800077BE76DC68DF9C11E5CEFA3C45EEE4B0B0
-:109590009C2BDC4024FAAE57BEAD10AB6509C71D4D
-:1095A0006F72623CADE1F1F1A46F58F67FB2D07AF0
-:1095B0006C5F2CD7ABE922E1FDB62E81F21B2BBBF1
-:1095C00092990C450BBB62E9691B4CA2F7E70FBFF0
-:1095D0009ACBE512A74BE5F713CB28AFE8FB13E9CD
-:1095E000A98EA341E1BB0A31BB3380768405C60155
-:1095F00070C32B5C6F35DC28525C93A1884E4062AF
-:10960000F21F8FA59DE23F1E3664DF0B57284E2BBD
-:1096100047215D3CBD2243FE016FC3C7F16C6A4622
-:109620003C1B1D3A268F607F18153A99E50826875E
-:10963000F81D926FD2778A301EFB0DBDD30FE52D3A
-:1096400066DB415C4FCCE7EE437F61B9F25D9F99E9
-:10965000F34764568CE6FB1DB6B9BDC86FCBDD5C25
-:10966000EF589D6334FD1BC58D7A6432E6E5F6A2A2
-:10967000CA0FC497D0EF628F40FAF5C6E5501ED2EC
-:10968000AEBEE822C9717D91D6CE347AB4F5BEAFB4
-:10969000D27F129B144AFF20DE2D6EB4D32FB9ADBA
-:1096A000C4C7A0DDFFAD08E09B7AF50CE76B8CE04A
-:1096B000F3BA8498C2B8A85BF463BC6407E201DE25
-:1096C000471568F119EDD6E22F769E161FF11EEDB3
-:1096D000FC13978FD3942779AFD39427D7BA3470DC
-:1096E0006A7DA1A6FED8C6320D9CEE5BA0A93FBE46
-:1096F0007DA9069EB06785A6FEC48ED59AF249FE66
-:109700000D9AF2C9471A34F094CE7FD1D49FD6B5C2
-:109710004D539E13B84F533EBDF7210D9CD7F7A86C
-:10972000A6FE8C330735E533FB9FD694CF3A774CB2
-:1097300003CF1EF899A67EC9E0290D5CCA5ED5D478
-:109740009F63FAB506AEB0FF5E53FF7AC77B9AF20D
-:10975000F9F29F35E537645DD6F26B04977F95CEBD
-:10976000BF69BE1353BC9FA23E60E20509F9B6650E
-:10977000A5C062319EDEBBCC847260308C0F3FCEC0
-:10978000B52B7E0D4B43795621160570DD5EEA122E
-:1097900068FD87EB3BE9CF1E37C6F3D84F0427C6D9
-:1097A000D9A2406D4921FD47BB4DE04806E1D8797B
-:1097B000760D1CEF7168EA272E9735E549DE2C4DB2
-:1097C0007972AD5303A7D61768EA8F6D746BE07496
-:1097D000DF3C4DFDF1ED1E0D3C61CF724DFD891D4D
-:1097E0005E4DF9247FADA67CF2917A0D3CA5B35174
-:1097F000537F5A974F539E1368D7944FEFDDA38141
-:10980000F3FA3A34F5679CF16BCA67F61FD194CF2F
-:109810003AD7A981670F7469EA970C063470297BDF
-:1098200045537F8EE9750D5C617F5353FF7AC73BCB
-:109830009AF2F9F2794DB96ADFDC907551FB5EB1AD
-:10984000772A9D9F69BEF795B919F287EF98E06C6A
-:1098500091417EE5F3F80BC8F57EB388F69187E277
-:1098600046319820087C1905420CF90A5D856A8A00
-:109870003FC551DC9754938CF93E60270010A34BF1
-:109880004F477B3A3268B7A55C997EED76DB1A6864
-:1098900013F97C6FBEB72A3F0FFD95A373D16EBF3E
-:1098A0008DF9B6E33840EF45F5C3FA78CDAC8D6756
-:1098B000A8CFF926C04B487FAF98F7A4B8AEE2F71F
-:1098C000CF375DA0FA43ED2A710E01E6D710D2FE24
-:1098D00003E0574860D7ED698275030EE3434D7688
-:1098E000821F6E7210FCDD26999E1D4D59F47CB4CA
-:1098F000C949E5FB9A0A08DEDFE426D8DF348F9EEB
-:10990000079B3CF4FE50D372820F831F8DCF23E060
-:1099100057E3F369F08FB1FC19F09711FE61938F53
-:109920009E9D4DEDF4FE58D31E828F377510FCE3DB
-:10993000263F3DBB9A8ED0F3674D9D547EA2A98BE6
-:10994000E0934D0182034DBD049F6AEA23F874D36E
-:1099500019825F6EEAA7676FD3397AFE7BD30095D1
-:10996000FFB26990E0568CD7023E1ECCE77E908A0B
-:10997000171566AC9CF841B50F17A19D8FCC51A06F
-:10998000FF8BC6CE0FB3B7C3E9F1A11217D69781EB
-:10999000B988F1C33199075B42FCACC795FE7644A8
-:1099A000309F19F8BD59C7FDDAE6184679D64CB193
-:1099B0005FD72B7CC9E2B8DDBA4E19D77A653DE492
-:1099C000217F66117FFEF2EBF815AADF9832C5FB06
-:1099D0002CF167AACE47FEB3C59F89F673C9146FF1
-:1099E000677E3CEE37AE7D99FAB33B69DFB1D218A2
-:1099F00088BF19E323AF8814CF1BADBFCD4AFEF853
-:109A0000A8E527CFA7A0BD3DEF4BD18B787A4D6F4E
-:109A10005D8EF1829E7C1E7FEEC9D7699E2F4DF12F
-:109A20009EC2F17C6AADBF4507E3FFB478CBE13B52
-:109A3000D283FEF4627449C10F5AC2643DE52732F5
-:109A4000F74BE9D0D48D6060217C33F3D1736EB6CF
-:109A5000F7556CA70A0C7184BD85C6B491E6153E16
-:109A6000AEDF2AF4FA6DBE4EF3BC3CC5FB1B3E2EA6
-:109A7000378DEBB599D767E2BCD471E54E9595BCAF
-:109A8000E481FD38BE4F5FB87856181FC4BFEAB7EF
-:109A90006F2F55F24AB6083C2EA7DA6B4A5E8AEA67
-:109AA0007754DF29F8D15E5F09FE0EEE2FBDA5D8F1
-:109AB0009F6F99B97EBE54AFCF42BBBE5A8870E249
-:109AC0003EDCA5FA3F5950DD427D86FB242D98737C
-:109AD00000E52D770B94CF5D0DEDE8A09D6A0C0499
-:109AE000E277F70AC47F13A7A6D3B8ABC1FC233F24
-:109AF0002B6E200DF74B815F2EE37C37CC147D0657
-:109B0000B0875FD3F93305DA975E6B10609CEBE3A7
-:109B1000804FC68DCE0F9B94F307EA7BE0B32FB046
-:109B2000BDBFFC744616C5F14FCE94116F2D3A7E21
-:109B30001EC9F7EFA293E7BB70512DCE9A42714A2E
-:109B400026399D1867AA54CEAF748BACF1E8087221
-:109B500074EC0CCE4FAF39F4F3FCD4AE76BF267163
-:109B600006A763E20C4EDFCA53AFA4E2F9AB4DBDCA
-:109B70007AB247586E7FB6C73AC27C1A77DD951124
-:109B8000C2DF9BBBDEE1F91AAC3F3B343FBD40E98D
-:109B90005FE527D160F51EB0848E6F88BFD3662045
-:109BA0001F45037F8F27FE3E8BF6F622A31C7533DD
-:109BB0003CFB014501787ABF67A77C2335EF680D30
-:109BC000F3D0733DB003F2B3C7F7A001F1BF8175C5
-:109BD000D2FB4D05B7A621BC990D943BD09F686F71
-:109BE0007EC901A35CB6E7C10A8CCF2EF5D7BC8431
-:109BF000CF258784B3E8BFC2FA983603E327427DB6
-:109C0000DB18E86FC533A56DC9F07E91C8E9C15E68
-:109C1000E5F400BE718B31C3E709EB61067EFF6995
-:109C2000B49BE621DAE669D643F536E616E282F918
-:109C3000F343EBA3E0F63F26A33F240DD0FEFBE663
-:109C400093C618A4F306C6F57730FEA1EA6D467CEC
-:109C50007E3B8B7062BD0F15BEFE3095115F7F2875
-:109C60008083E70ADA932CCDEB708D0FEADF0F7556
-:109C7000FE7CDB78D2CF8B10EF2F3B96C91837BB19
-:109C80003DCEE414B13CDA9FC6F75187E43CBB12E9
-:109C9000198C7B3DA0E771A8F07109052F7F86F62E
-:109CA00083D1C07CB8BF01EB9BE5E3BA1E63A0750E
-:109CB000D582A8C5F85999471EA9FD56A5DDDE2F06
-:109CC000B81FEC83F9E079C961FDD8957E22783F11
-:109CD000AA1EC1FE488E24304D7F9B31C905D78115
-:109CE000D54DE36FD64593DCF978AC7713D24B8D25
-:109CF000FFA8FE616FFA0719E4C77FDE9282763A09
-:109D0000F02FCF4B2CE6F2E935BDEC43F8B5D27419
-:109D10008AFFAB727771018F972D56E3634561F12E
-:109D2000B1B0B80C2B1A395EC698538FFD4E626FD6
-:109D3000A9F8A178CCA92289E8EE03BA63BCF9940A
-:109D4000E2A7964672FFFCF73362899F62E66710CE
-:109D5000BFD9625980F6A3AC22F15B0FCBB1C484AA
-:109D6000C889FB9438EB6EB08758487CFDBEDC0692
-:109D700013E61BECB0F0738CF79745D486E6BBFF77
-:109D80006EB69EF0797B71E92BC83FD9167F19A971
-:109D90006DB724E37C04657E93ED807F1D36ED5125
-:109DA000E2A54E138F4F9593DE56E97EAD7AFB699F
-:109DB000C9BF2D02E71FC7681D5A3BCC244FC54EB3
-:109DC000770053AF27152F3D4CF4943C59D84F776B
-:109DD0007E04B340FD4FBB0DE4E79FD4ADFE1EE60D
-:109DE000C50FBC6964B8FFD9694D96506F747E7118
-:109DF0005D393DADB3E6321EEF8CD481A0C8B1B35E
-:109E0000277E844453CE9F750AAC9751DCCD1DA9A3
-:109E1000035FAC53C72E97C0B88E595C7BA711EB7C
-:109E200079449CE77B45DE9F225EF2593DC1F71BDA
-:109E30003CB507A0DFFB634CC42FF714794EF071DB
-:109E4000B2B68530BEE23902C3F3BC6D066E9F59CF
-:109E50009D117C6F8A713BDF339849FDFF429197DA
-:109E6000AD0E771F1E1C19156F766960283E427C67
-:109E70009742713D158FA1F4B2E76BE8E5D587D223
-:109E8000AB00E83525945E6EE1EBD0CB8F4966F1EF
-:109E9000C3F9D457263F589ECBF51BA6CA85F36954
-:109EA000A971B605F35CBA6DA20EE9D61D919C8D21
-:109EB000F139954F55BE1D815FB7F4A0DC4891EC98
-:109EC000B86F6CAC8CA07D18957F55BEB514F2FCB4
-:109ED0002DE0DF5585F05C69F154A06C09E75F8CDB
-:109EE0009385F269F5A8FCCCECA1EB7811D815515B
-:109EF00031680F9D3BD419C2A7D5F517252E57AE53
-:109F00009444E407E37A8B8A04F66E28BDE1DFBB54
-:109F100059CAFCC81E92C80F53F17AADF8D77FA377
-:109F2000390BEDBBED786E11F0D52E38DD8918EFC9
-:109F3000AA7FE70E7CDFA69C1BF6651BB8DDA5ACEF
-:109F40001BB5BD49C5655105B82F30E342E43AA8B9
-:109F5000F769824E46E4B4C9AB7F44EBF04C24C3AE
-:109F6000EF6CB17DB54FD0BA9AC870DFF0D3DBBCCF
-:109F700063711F7F27D0E95D4AB2F627EA688FAB8D
-:109F80003F11D71520D7C19F5E077FCF94723FC185
-:109F900087668E53F2ACDD4AFD7EAABFD3B0C714EC
-:109FA00081FDA49BEC0743F8BF4489BB5716A8E783
-:109FB000755A64B4D72A0BB85DB3B7E9C8ECF72774
-:109FC000E0783A67BF0FE3895DE8675EE0EB882CD5
-:109FD0009F8CA921A62FE70878AE815DC73A311E74
-:109FE0008FEF9BA704DB7715F07567423B06E867A8
-:109FF000DAE69343E5A849277847CA83393C53E218
-:10A00000DF6D63546E3AF5089DF38FCD700A980F9B
-:10A010006DDAB687E13E8D39C0DFC765B885352179
-:10A02000EDC62D847187F005F0972F0AE48FE920A3
-:10A0300030662ED22182E292E1FD2E8A2FEB956CC2
-:10A04000A3F34938BF3185DF54BE51E74927564253
-:10A05000CEEB978FE376725BA3E100E5A116441384
-:10A060007E3F892B8B6223D89FEA733FF081CF8894
-:10A070007EB3899E07C1EFF64D44BFD941F061F030
-:10A08000BBF17904FC6E7C3E0D7E37963F037E3734
-:10A09000C23F04BF1BE14EF0BB113E067E37C2C774
-:10A0A000C1EF46F8C7E077E3B30BFC6E7CFE0CFC17
-:10A0B0006E2C3F017E37C22546E00F9C4F96CFB1F4
-:10A0C00014E8DA7EB7C18D7984FB15BAF6B8C7C536
-:10A0D0003A81FEE62C1DC5C4CDBF7C88E17CCC0E48
-:10A0E0001D9D0BDBEE7888DD8AFE6CBE95ECA9B673
-:10A0F00067B99D6296F632943BFB055F2D73C2FBF8
-:10A10000AE926ADCDFCB706C298B01785757C53E65
-:10A1100013AC8F4C79C9F2E61058B6BA361CB507A5
-:10A12000E1B1D90724F058D89E8279FBF048108E0F
-:10A1300003F3871FED5A50DD0C2C1418C7C8DE1826
-:10A14000483750DECE1AA417C6230A783CF106D64B
-:10A15000E2C0FDCCB132784502D50FB0B86BAFBFCD
-:10A16000BF40A6F7E1DF5DAD9E2EF79AEA31F12AF6
-:10A17000ED61B97095764CC232531F8C7D975E911C
-:10A1800053F1169253ED18DF01BCB79BF9F3BF678B
-:10A190002A7ECECCB25533E1B96A26A76BBBD9670C
-:10A1A0002FC3FEA7E8289F8135A6FF7A1CF477D736
-:10A1B000BF4B0CF34155FE7C5EE1830963AD742E09
-:10A1C0009FDD63A2FDFCEBC73EDB1A03F084279CF6
-:10A1D0004ECC7BD8C59C11C827BEDD3ACA7BFC415A
-:10A1E000EEF89825507D72DEF33128D763677279D7
-:10A1F000E357F2859ADBD68DC578D4A7AF7379780B
-:10A200005AE9E780BEAF9EE89967213B04284FF6E4
-:10A2100046B303880D3A5397C49F06BD7D05D633D8
-:10A2200080618079D9862F6698D0DF6B1934CEE3B0
-:10A2300079B37D648718CC5E7B34BCDFE3D3915C5B
-:10A2400068912D94E7B6CBE2EAC573CE3EBB8EF2A1
-:10A25000617765EB088FAD969BFC68E74B42732DE9
-:10A26000EA31BFFD98291DDEFBB37594DFE8772F37
-:10A270009D87B0CF2B51FE15FD60B93786CE77EFA5
-:10A280006203AF4EC3F26A6E87B525FCF55424C64F
-:10A29000BF6FB43BF9760B93313F8C52C574E877AE
-:10A2A000F76F8BC4715431C59FF591FF6A3372FA11
-:10A2B0007DA77BBE7D1CD91921FB5A468CD5394D13
-:10A2C0004E289F6A71CD43FF52B2BA4C98F7D76AB5
-:10A2D00077996A68FE3C5F8DF232A0DD16BB8EFC7A
-:10A2E0005C2CBF359BD4E1E98C7C25155FC6793F9A
-:10A2F000D48DF890D632962EE3F8245FE8BEA1699B
-:10A300007C51AF0CF3685F1743F3900427C16CAD29
-:10A3100044E31E2347D0B9E6BD86CA5EB417C7988A
-:10A320006EA7FDADA45A49B3FF94E8D5C2F1CBB5F1
-:10A33000702C9382FB57D0AF7DA61A7FD3E22D1CE1
-:10A340001F49F6D6D771FC495E3A04396CFC8FD8A8
-:10A350001F8E2E65384E0B8D33C1B2BA14EDA67820
-:10A36000E66946FEFB47C739D5BED4940EFD4F8D36
-:10A37000D39179348D0D6CC3767729FCDE9ECEE9BE
-:10A38000195C5722CD0BD6E53C5C97631B75E0B09A
-:10A3900005DB4FF781E3A6D93F88D1C013F68CD1F6
-:10A3A000D49FD8314E533EC97F9DA67CF2119706AB
-:10A3B0009ED259A8A93FADAB4C03E7041668EA4FFB
-:10A3C000EF5DAA81F3FA5668EACF38B35A533EB329
-:10A3D0007F83A67CD6B9060D3C7BE05F34F555FB48
-:10A3E0003E5C3F96CDFCFBEC7AA3638CE67E9B70D3
-:10A3F000BF21DCEE377DD9226F437EB619889F25B9
-:10A40000D4E7B8DF7C37F78F4CC54E19E54B81C2D6
-:10A410008F9F15BB1723DD4A6D26D20B9285D793EC
-:10A420002C73C95E49EB30D0BD3B929D0D9547A280
-:10A430007C6EF2CDCE98101CB7D9BE87EEAF28B592
-:10A44000CD63988FA47E2FD9DDCC6BC5FE64EACF97
-:10A4500064F7513DB30CDF87CCE3A44EC72C28C76B
-:10A46000C18F43FF6034BF4DF5D7543F6D34FF4C6F
-:10A47000F5CBD2742C029F0784FE3BD07FCFAE7FFA
-:10A48000BD2C9191FFB605E77D3F9EDB46BF6D2A4F
-:10A49000B7B3DA1216C818CF694FEFEC1D87E389FE
-:10A4A000D751BC14EC66E7D2107BF1B199DC0E9564
-:10A4B000C6B5F7A3FE6B8836C9682F49A603B3DF7C
-:10A4C000077CEDD7F73F85F18956C1BEB113E5E2B0
-:10A4D000DD16CA03D9ABE04DB6EAA66F83763B9B87
-:10A4E000DD129ECFEFDCC99CADB83EE24AB745C352
-:10A4F000FB0929353A0C034DCC68DE86CFFB67F2A9
-:10A500007D9F49D90774B1503E39B77439C6BD44EF
-:10A510003BF4779538B468EB60381F96219D45BEB3
-:10A5200042EBFE0A0CBD34C644FB9266A4B7404F12
-:10A53000C28379D0E237239CC1F162760BFE488159
-:10A54000DBAD9847571AD341F455ED59B473B1FDBB
-:10A550007B8ABC8F213EE3166AE92A990E113E766A
-:10A5600029FB12EDD1F22F513FB7A767C4E07E96C9
-:10A570003A4E55AE1C56EC7BF5BD2A571C986B9392
-:10A5800017B46F80CF3B30FE6696F6D0B94CF3BD62
-:10A590007B18F2B5194FB193BDEF933DA43F3C9AA0
-:10A5A0003CB4F271CB4DA8AF2FC7B9C89E3537FE6A
-:10A5B00098C6178E37733FCF471B0DAFB6CC4749B0
-:10A5C000BF830096F13CCFA9044B6D68DC537DBA84
-:10A5D0000BB8DDA257F386C093407D7659CD4B7200
-:10A5E00047F2F14573B82773058DEF8E7857E2D5A2
-:10A5F000EC6D33F89BDE10BAEF943C26C443DBE7E6
-:10A600004BE6D1BC255A0C6CD717D907289EACF85D
-:10A610004B6EC53EA9445F0C9E69067E8EC019B77D
-:10A6200090EE3353E3209766F2FC45A78F893C8E6A
-:10A630003794B7AEBB328DC62A1B54BD4BA62CD760
-:10A6400053F07F37E6AB8C6F97B479EE8A1E57F5DF
-:10A65000F4843DDAF2891D5A78927FD8F7FF897A1F
-:10A66000FE46FE3BE8016DF9A38ABEBE11F535EE4C
-:10A67000677D83E78B98604457B89E0DEA3D900351
-:10A68000A99D8152149B295B254D9EC998307D78E8
-:10A690004F914C78F0F44A7AD4B36A9C265C0E0B46
-:10A6A000F75CD882EBA534325246F989710CAF9130
-:10A6B000FBE55EF053EE979CBFAB46BFAA57A43CA8
-:10A6C0002A954EE174AD2D14147DEA110BC93FEEAD
-:10A6D0009F8EFE3AF6E70DE94F8DB79C2FF69A3123
-:10A6E000BEA1C65D2ECD935E12E4601C458D0BAC01
-:10A6F00052D6CF2EE71BF53D308E9E33468A8154CD
-:10A7000088BFEC6DC23CA95489E4977DC6C6EFA111
-:10A71000FF5DF67B28C778A22C27925DDEABA738B9
-:10A720004099C2C7658ABFA5C65BD20B399FA72ACD
-:10A730004FF82282FBF58108B45F271F01D9ABA532
-:10A7400067242FE771B6299DE1E56ECA5FBA4EE135
-:10A7500017CC3B2B4DC0742F0E773221D60E749C34
-:10A76000B6BCFF14BA0ED9AFBC14817C78D4CCED42
-:10A77000B5A7157E48608213F3F3138E589C7EA80C
-:10A780006715D9D13E9887F3B4A4C9339B7A420B9D
-:10A7900067B310381DC7A18577CBF5B8F5CC7657D0
-:10A7A000834D0E539E59A8E46567B24CE4AF0AD1BD
-:10A7B0009283FE5343A985215E8DEF4CFCB73E94F6
-:10A7C00017AFF37BABEC91F283E5F0BDFDD5586795
-:10A7D000B31CA4FFD3E047A37EF8EE15276BD50783
-:10A7E000E35ACF003D33687FD94EE59D4057848FB3
-:10A7F000815F9D41FBCB59F4FEC7E05723DC057E0A
-:10A80000353E7F067E35BE3F017E35C2B71797DEE7
-:10A8100084FCF216D443BE88C8396E1A8F716E8BD1
-:10A8200048E76EC2F97147FD7B969B4156153BC6C2
-:10A830002E8C477ED82AD2F9E49B0AC72EC4F3DBBC
-:10A84000A171B5D0386330AED62FA8713523D0E7CB
-:10A85000F20C59C95F50E26B5E1E5FFBEA76DC6A60
-:10A860003B14BF1CD6CE501CD3E47B3F0B8F6C092E
-:10A870002C0ADE7F74F77F1D463D9398E4ADC579C1
-:10A88000D7E5BD6BE076373F4F95A2ACA37D669EC2
-:10A890004F9AA2E40185C72F8BE7BC73473CA0EC1D
-:10A8A0009E9FCD5E89FE7FF1EDEF4C4F03F854E1A2
-:10A8B000532B31FFB7F8FBEF3C970C78CA9AB58160
-:10A8C000C37BDFB99CE2C43C8C875762FEAF2D96F8
-:10A8D000EBB77DCAB9A421BDA7AC97CD8D4F901E13
-:10A8E000073B83213E5A123CA45F3F8E1BB0D540EC
-:10A8F000FDCDF10309ABAFA20F36371EA6EFF70966
-:10A90000CE737E1CF74C13CF3B55F4CD2585775580
-:10A910007DD360E6A03A1ED0B0F47EAF120762EE9F
-:10A9200064FA2ED6CCE11E5B21E9A507CAE45FC913
-:10A930007CDF92FCE31EDB75DFC1BCBA967912EDB9
-:10A9400027EEB5B8CCA8B79E53E418B4EFA3FC9596
-:10A950000A13EDF3B0B8E5B4AE63D47EE2AA291FC2
-:10A96000214619CFE9C28800C6075ACA4D07518E41
-:10A970003E641947EDB514187C189751E16D853088
-:10A980001EC067B42D261D6155CEA9716386BB6AB2
-:10A99000D06E9932ED3235CFC1A4BF106A5F5B58DB
-:10A9A0001FF18F53278B681FBA67C9448FE9CCB951
-:10A9B0001CDF1B847A1F3223CE43173A0FB95C3B4E
-:10A9C0000FB942330FA1C11440BBB0A502E601F597
-:10A9D0004F5BF369BCE17453E7F3FD42CECFE1F383
-:10A9E00064CA7E927A7EA0CC5E741CC755A173B7F0
-:10A9F000E2B85EFAAC3A0E2F929CCBEA257C3F3E41
-:10AA000098CFD3FA75F2258ADF13F8FED7ED069AB0
-:10AA1000DF2BB3F9781E35F8D3E96087E44FC27DA8
-:10AA2000DFD1F8F84F0ABD837CEC66B8BE5A62DC11
-:10AA30009C8FED03B666E4E3E881846D34AFC08893
-:10AA4000F409E7E7707A0DE05D09E447FB44C4FFD1
-:10AA500057D157A56BF83E98CA2FEE597695DE0E62
-:10AA60009A67204DB34F082DC823ED8F6F87F6E40A
-:10AA700090FD3483C34376B63ECE9985F1E6962F9A
-:10AA8000C511CF4DCAB3F87A6FB64590FDDD62E3CC
-:10AA9000F677B76D81C66F2A073F0AF791C558D67A
-:10AAA00089EB4A8C5A41713431112D2F620BAD5D07
-:10AAB0001BB590DBB576D755CF4F49FDA2E65EB505
-:10AAC00061766DCC026ED7DA0C64D7EEB31A961F9E
-:10AAD0001841EE0C16723BBD1BE73182DF08FE22E7
-:10AAE000C533557FD160F792DFA7CE7350E177B5BC
-:10AAF000BED15ECF30BE261A9C32DAB1A272BE152C
-:10AB0000F39AB342EC02B5FFCBCAFECEDBC5FC3CE8
-:10AB1000849ADF5EFC2BA17E24BCE7CC52ED92919F
-:10AB2000F9EE1FE01B92132E8BC18D7687CBE2A02E
-:10AB30003CF0D1BEC32DEC73314139E3FC325F24CC
-:10AB40007D243929AFBF53DFFFDCAFD01F7CC94262
-:10AB50007AA7D39A52166A9783D14AF9C9E0FFFAC5
-:10AB6000B2A0B1A37F8315A90BFABDE087DD302B1E
-:10AB7000645FF254C359DA070AB757C3E30A43EBD9
-:10AB8000DD76389D8FC79F84EB5768284844BE0AFE
-:10AB90005FEFEA33D531FDBA3530AED4A41C7AAAC2
-:10ABA000EF1F67E2BC91EE4F5B3D4407AEA7274124
-:10ABB000675122E9E7D538EE8FB6BE91E094F19C5B
-:10ABC000ED45D2D397EA0BA27620BF67C5907C4DA6
-:10ABD00051CE8FA9E349B9AD3B3AC682797C039344
-:10ABE00030FFCDDFE4B9AE5C4F7E867BA4F13E3012
-:10ABF0004B89C305C6B2D0FB81E4B8BEF91301EF9F
-:10AC0000B245E794697DD949FFA972A0548A2EB74D
-:10AC1000039FA73631A745C6AB93ED14174BBD2252
-:10AC200012BFA5F6F0FB9DC7C60D0878FFD0503FB8
-:10AC30004A9E93BABFF2497D39ADCFD444C6FA28B3
-:10AC40007EE9A17D884FE2024B707D7FF2301F517B
-:10AC5000EA13DA72D0B914B75EB735C22F43D363A3
-:10AC6000EF85F1E178BE27B094741C474FFA0E8C43
-:10AC7000FBFC2492E23E624706C56D6E4BF2DE4558
-:10AC800078F5CB77E9C62B93857A75DF8AA0FB042C
-:10AC9000F6097DF3299FE24E1D7B7284B8D4BFCEA6
-:10ACA000E2EBFCBBB3F83A4B75E4737A3B72AF5BF3
-:10ACB000137BEDEBE914CA6D18C7AE283FEDD3A99D
-:10ACC0007961BBF523F3152BE27EEA903C56F067E1
-:10ACD000422F08F8451414BBEFC8D34F3F9DC0F86E
-:10ACE00011C3717C3F3274DF3822C34F85114E3758
-:10ACF000C91FC1EEE672D65EEFF0017FEFF8421C8D
-:10AD0000B1FFD715FA35A7DEE5C0FAE5B2939EDDAF
-:10AD1000A9F9676A007F168B811943E4B0CA27E15D
-:10AD20007ABEC13AEEAA7EBC01E4B17C953883417B
-:10AD3000C9FFDA7E6AA609EF0FDD6E71F5A1FDB5D8
-:10AD4000DD12E7A238BC05E446485CCA627999F88E
-:10AD5000D0E2E4F13A0BCA5F8C4BE1FCB371FC2FFB
-:10AD6000D3FCD57ACF2A72C8E20CD07EA9D9B98794
-:10AD7000EA99240F9D9F33C531CA6730D9F9BDA325
-:10AD800011193A661A411E1F9EC5FDC0EDD9AEBE0F
-:10AD9000321A9F84C7AAD87687CB41FA10F10CDF0C
-:10ADA000F758F3A342F1F39E220F5ABAF9FC3C8DF7
-:10ADB00049F6723C6753ECF9AF5979D8CE6A13DE85
-:10ADC00073275A73AFDACE8561ED3C92501E4BED7E
-:10ADD000BC87ED8856971DDBD12BF7A786E3F933A7
-:10ADE00085DE7F6F3C0D3048793C8417224C404310
-:10ADF00097F0A705E362B1237DC7E562BAE2BF80A1
-:10AE00005CD417C1BCEAB2DF7D99AF31EEB7C4CCD8
-:10AE1000E779429780B3F1DEAAF0FC8B703B46D510
-:10AE20003FAA3E8276446CE751B4632606D7911A56
-:10AE3000CF49AEF5F0F512E7217E01BB46C6F522FB
-:10AE40002A797EE1F3B9A188E35FB015C8A82FCABB
-:10AE50003FEF4FC6EF4E5ACF25733B56BBCF7CFA20
-:10AE6000B3C3662CFFA4B6ECAAF68ABAAF3CDA7E6E
-:10AE7000B2ED5F3EDC126AAF8CB6BFFC55FBCAA7D1
-:10AE80006C068ADFED17B4E7E32B8AB8FC7317A9C9
-:10AE90007119EF8C228C430A1E273FF0CCE3339FBD
-:10AEA000157B0B914E69ED06E603BA9EFC2CDFE1A3
-:10AEB0000D69E75AF1ACC6E1C728F6D418CB610199
-:10AEC000D7E9985ABF8071F4E4DA4EC17D957AB122
-:10AED000455C8FABF5F54AFB25D28088FAAAC4CE33
-:10AEE000F562F2A0C4B242E48EAD88AF5FBD62BF2E
-:10AEF000DB4E3D65C6F64EE93CED99A81F6C3AF96C
-:10AF0000C990F5AEBFCD652A0B995F0BEE0F8D4052
-:10AF1000C74D45AA1E0C90FE56F5AD5ED513719235
-:10AF2000464F6C8EE47CACDA3B9B0BB93FB4399254
-:10AF3000FBE5AF3ABCEB11FF1F177EB868BC8CE78E
-:10AF4000643B0DB89FFE55FB2443F68DCE5FA3FAFC
-:10AF500033C8FF4EC9FEF37EF83EE7FBA564EFE57C
-:10AF6000E18D23226ECD72FB0FECA93B8BE2F9D56C
-:10AF7000FCA1F46661F70B8E361F2FDE6B9A87F10A
-:10AF8000BF3E8ACFDEFFB930E27988AE22D52E1AD5
-:10AF9000DA0FD4C4599315FD96AC94CB18674DC7FE
-:10AFA000FD2D6D1C747AAF16CEEBD3C233CE84C5A3
-:10AFB000557DEEDFE0793FCC1FC046F7C13A4339FB
-:10AFC000B146D9F74CF1F94BF19C782AEBA4FDC5B9
-:10AFD000E4DA180D5E8B4525EF02AF3956C7093FFD
-:10AFE000C952E579FCFED921FAFB9826BFBF7CCD7A
-:10AFF0005D782526DBC3CFF999A073C4D7FAF94B46
-:10B000002B90AEC3E2B5F5DA386D726839E061DDD8
-:10B010003EED79418F3B87FC8165DFD09E1B54F369
-:10B02000D271BEC9AEE1FD7F75BFF02F6678FF6AB1
-:10B03000BB8F82FC21F9AADC279C8A45D88E14108C
-:10B04000709F7B4C3DA37B8593B732F748FB057F10
-:10B0500054F0158E67E62B21FCCD51DE8DB1F07CCE
-:10B06000D5315B75640F8E01B9407F6F6023C800D6
-:10B07000809337CA644F2EAED531D40FECF326CD72
-:10B08000F7305C8AA7AA747FD4C2F37153EB985F40
-:10B0900087F3A9BF8ED6138D6B5C901F005F9A7BE0
-:10B0A00005161768CFEBA6869DD355F92039ECBD60
-:10B0B000AFC8AE5917A0E7FE58447CC2F5DF04D4F0
-:10B0C0007F30A48F669E398CF975C5DB18BFD726F3
-:10B0D0003A82DF6B13DC8F10AF00BF9E32CDC942C6
-:10B0E0007B65973D4287790F27A3FB1F63D18C5D5A
-:10B0F0002C62BEF222BCEF7060B200F017275AF744
-:10B10000B7CF8672F3C00F30986CD9BDEB9679A992
-:10B1100041D8F6C0F70866054CC67B8130E714D7E6
-:10B120005D847DC111BCEF3A22DB42C1C908A6BDD6
-:10B130007FA7B550DE8D7923AD1374CA39E99072BB
-:10B1400098C786D9EAB97F37E5DFB1793C0F20B4DB
-:10B150007DCCCF1EB5FD05D07EEED768DFC4C79F7E
-:10B1600080AF40CF24E0F8310E8EED237D3168149E
-:10B17000DABFD29EC47C0770FF06FAB308BC3F3B1F
-:10B18000E6A524306D1EC2507F76E86FCAFFC17CF1
-:10B19000960FA787FE6AF458F1F5E8D1AA73D37821
-:10B1A0007D532DE407E13D56785F9D59E9CFACDC36
-:10B1B000DB85786DCD0FE215EC406A17AA375F5139
-:10B1C000F08C7986097603E17934BC9DB2F3BCA892
-:10B1D0009DF6087F73FAFF077A3938BD42FB437B3F
-:10B1E000F29AFB5B01FDC55D7B7F885F5C3F43F8A6
-:10B1F000059A6C4BB876FCC2A87CD782DF53D0AEE0
-:10B200002E04AFC1FCA347ECE81798F51E13E663C4
-:10B210007E6B7634C9EBECB8A526CA47885F4AF93D
-:10B22000C56DD916CA876FCBF886491FA2A7DBB2B6
-:10B23000ABA91CEA53DE54762002C3146C0AEBA3BC
-:10B2400038C0CEA27207FA85BE7A9E87A5E625A9E8
-:10B25000FA9029FB9F342FF8306AF6F18153507F22
-:10B26000677D2EE59D4545FF95F2AD76D53A9D5813
-:10B27000FE9899EF637E57D9C74246A578DAD4C2C3
-:10B2800027703FD735A141A0FDCB8D57DFBF745D3F
-:10B29000EC2BC3BC2D56C3F3B21CD552983ED4AE92
-:10B2A000DB5D88579E3FE517387E35ED3D3B3B9E85
-:10B2B000F0B633E320C3BF3BF41CB4256AD7970E26
-:10B2C000F398C2D7A36470D33D63AC4147E348C64B
-:10B2D000D4005071AE290B1D35F03E65AD44F7F931
-:10B2E0002666DF4BF94C60E593BD919DFDCB328422
-:10B2F00087CD738D761EE1F30A1FB77ACFB14A2F3F
-:10B30000D7456724FA57AE094B29DF8C7ED4F52E3A
-:10B3100086CD07EC61739C8EEE838BC8089917D39A
-:10B32000D453FCB77F2EFC18E82A5A47E1FB62FF92
-:10B330008F9F1B3232A7C940DFA9E76CF87EDB186C
-:10B340005C3B48F734C6F3BEC3BFCFE7DF3307DF4C
-:10B350007F334630139EB3113644501CD368041813
-:10B36000CFE128F78D3DAAC4DB9A052625B942FB1B
-:10B370000B50DEBC68BA2103FD8653A665763ADF22
-:10B38000A6F851FA680FE52DB2AC188D3F7A4A390C
-:10B39000A7D6705B7A22C6EFA2A0AC0FFD6AC9697E
-:10B3A000427AAB7113DBF8FE6FA21E3F3B5BBFCA54
-:10B3B000847A1B9DE042C62EBF70653FDE33ACAE83
-:10B3C0004FE320BFAF630896EA292FC43898A679C7
-:10B3D0001F50FC301576C749E5141F2A9609CFA5E2
-:10B3E000CCDE8ADF95027234F70328F77F0C6F3FBB
-:10B3F00045F33E00FE75E8BEC0E8ED476AEE193041
-:10B4000082BF3372FB9961EDDB476C3FD86EACA60F
-:10B41000DD3689CB0D5F5C847FA4F81EE6FF17C77D
-:10B420008F9EB79655ACE4DB9B40A2E13E94C23FB1
-:10B430003B1CF594C72646F07D533D8811E4A71EBA
-:10B440006B2DCFBF48D1E6B1A9F78BB4E1BD215038
-:10B450005E66D1DAEBA56CA0679A807EAAD65E2FD5
-:10B4600046498AFB532CDC8EAFA77D527D8A562E2F
-:10B47000F4E07A81F9E8ACB97D94F7166FA1BC8647
-:10B48000D1E20B6F3531CAC7D2477AEA51E7959EB0
-:10B490004C1ADB56007014E7B3C527A7AEC2B8D16B
-:10B4A0005B0A3FB7811CA073A40D8907C49076ABDB
-:10B4B0000D8109A857AA75FC1C00FD40FF6FC58FC0
-:10B4C000A1386B78BFEAFD312ABCB25E989D11327B
-:10B4D000BFB794F531D4DF1DC907D0AE1DEACF1830
-:10B4E000C8A3FE86F28A94FE12FEBEFEFEA0AC6FDA
-:10B4F000B5BF957769E7B7D2D047F35BA9DC5BAA04
-:10B50000F6F7079C5FFADFD19F920F36D4DFB7B40E
-:10B51000F35B69ECA3F9AD1CF22F95FE12FEBEFEA3
-:10B52000D47C07A3B1BE16F969B4BC0735DFA1D03E
-:10B5300091AAC97700CF6661A9C4D88302E78BEFCF
-:10B5400014CFFA1EF2C5E5850D4EB253147F8FCE8F
-:10B550000789743E88F4E8E2146E87A8ED1F692A13
-:10B5600060EE893C1E84CFAC2281CE1F4C2A10DCB9
-:10B57000B8CFB60FE407DE83B71FD63996FB9B1C06
-:10B58000F43CD824D3F310F8976E8A7F39090E144F
-:10B59000737FF1C1247BD51AB43F4A2378FE75D15D
-:10B5A0002CB06C83FE1BAC975366CC73BC89E5E072
-:10B5B00039B4CC0E8ECFB8F204BAF73E22E7745FEE
-:10B5C00013C03B0A4419F3CA77C823C7737E5ECC05
-:10B5D000E3443B94BC491F9E9724A502FE24CC7FE4
-:10B5E00095422A262EA4F3368BBF154DF64DF5371E
-:10B5F000FAAD7618C72D42CE6F32001F7F54EC9BF8
-:10B6000055690B481E84FBA771A8A972319F50F49D
-:10B61000FBE1D765D665E4DF2EBB91B118F87E312A
-:10B620007E077AEA578A7DF45ABF91A1FFE72BE79C
-:10B63000FBD7B7DCABF54B1F3407EC68173E98130C
-:10B64000C7901ED55BB5E53B0C7CBD2D0BF35317A6
-:10B6500087E5FDA8F720EEC05F6732D655ACDCFF6A
-:10B66000A2E4FDDC85721EE338293194E4AD9ED35B
-:10B67000341AD988FB926A7BBF53E4168B73131E6E
-:10B68000D43C39263E9383DFABFDA9DF3D2A3C93B2
-:10B6900074B5B829D88167FBB3B8BE477BFD3F8A34
-:10B6A000B5F94997178EFB4E391B896F07248C53C8
-:10B6B000A8E3FFDFE2D71DC57CBEBF9AF3492E3F4A
-:10B6C0006797C242CFD7A9F95FCB866089EE15563E
-:10B6D000F3FF9863201BE9FD9FB3239DF711FF291A
-:10B6E000F648E04DDD95C8AFDFDED0381CEE54CD16
-:10B6F000F955A5BDD1F03CDABD13F413921FD9D290
-:10B70000EC74D079BA78BECF3626AEEC3C9EDFC260
-:10B71000F27735FCA53DA7D5D2FD94807ECB63782A
-:10B72000BE4D1FEC17E3C06D166CD7CFE34A81A75F
-:10B7300028FE9B521B105AB383E781C2E562CA46BA
-:10B74000ED79B3F0FB142B2DFD922063BC7F80CEEE
-:10B7500031CE2FE1F4A23B3BB05E3CB727C5641D60
-:10B76000CF17192B73FB3263202D74BF636A899244
-:10B77000671AF9C65619446F46C943AB306FAA32EF
-:10B78000EA8DADE9288A4BF6AEC23CA9CAE4373E41
-:10B790004907793BA9E4610E4F7EE39371004F2E78
-:10B7A000F9570ECF6284A42925DF5D85FBAA534B90
-:10B7B00094FB95581F9DDB4E4CE27CF4F73E45A36D
-:10B7C0006EC47539A3448D5B323AA7ED39F18B33E2
-:10B7D00028A73C6A9CD7ADDDDF64CAFD8937A8EC99
-:10B7E0001567237B6901FE0EF8BC41B97747670AEC
-:10B7F000105E2706EF3579F8EBDCBB133C27CFEF63
-:10B80000116A69645EEDFD886E85FF79DE903A1EEF
-:10B81000B5FF61E3C2FB016342C7B58FDA51C7F5DB
-:10B82000718ED1274C0BEED7AAE3FA5818D88F4166
-:10B830008F033D7D3548D78FAD0369F8774E60990A
-:10B8400079098E1FD82F3843603DA7E3CA921F9114
-:10B850003D559CE45E5982F97B067E7F41BB624781
-:10B86000EE8AF7FAD0AF077EA3BC4D5F2A3FC750E0
-:10B870009EABFD7B6CEB4BB85DFA27E55961DC5361
-:10B88000FF7A2EDEA72EB066A8BFF9F3CB06F4FB35
-:10B890002B4FF0BFD7BAE9F83B06F4DF37210CEDA8
-:10B8A0006CDA6718F1EFC17D888709F8FAD5F82BB3
-:10B8B0002FA566B6C5C17836ADE1F76437FC34BA5A
-:10B8C00002E1861A9A255B5174B4023F5BE9E96E86
-:10B8D000C3E72AD6FF12EE4B5479B57EC4376BB559
-:10B8E00076FFCA7AADBDBE6A0F5007F4DAAAC6E485
-:10B8F000B0FBFCF83D81550A3DAB1CBBFBF0FE8163
-:10B900002A16764FA08FC791BEC967004F6D7CA4E1
-:10B9100012FFAE14CE63A34871DE9752B74B78FE88
-:10B920006D733DBF9FACA2EBA281CAA11EEE2B2579
-:10B930008CE1F7E1A9F253D5EFDF7CE1801EE3054E
-:10B94000E1F705AE5A3E8FEE055F2E6FE0FA7DEC13
-:10B950006F2B62E07DF83D80D55D5CBF57370A7E76
-:10B96000BC77F79BB55A7F6025EB6B437F6665BD5F
-:10B97000F6FDAA462D7CA444D1BF93D9645C1FCFA9
-:10B98000960812AD1705BE90FADBD702C83F499E54
-:10B990004EE4B78D86C054D473E5495E82D5727883
-:10B9A000BF89EB21AEFF75B09248FEEA79DCC25741
-:10B9B000C7EF67FBE6307B20C45E1087C3EFA9F2B8
-:10B9C000D3ECD94A7ED80B02FD7DF072C92DC58417
-:10B9D000F8C9E17CF8BE223F5F63FDD938AE4C6404
-:10B9E0003AA04BE632FEF79F335FACA1BCCACCE96C
-:10B9F000825347EB58C71AF15E3190172817D0FED3
-:10BA0000C4FB3232C5CEE524A7A719ECFCDE1D0726
-:10BA10000B5DFFEEA79880F9823874DAC74DE9A56F
-:10BA20007B371675ECBE88722E63BCDBF5208C6FFD
-:10BA30009772AFF6AE9F0A64CF6ECA7E99E4612218
-:10BA4000B005F6BBC9A1C8C52EED7D188928A7F0A1
-:10BA500000CBC26CEA3749DD7F50F37A036574BFCF
-:10BA600054A2D2EF971532FF7B7B1B3A059C772AB5
-:10BA7000F335631CEAD7280BE3834F759FE0C6E0DC
-:10BA80003EF97AA4679DA39FEE8751F7C947A8B7EF
-:10BA9000A5247E78BDD1E4EFFFF5F37F007E0B583F
-:10BAA000CA008000000000001F8B0800000000009A
-:10BAB000000BED5A7B7054559AFF4EF7ED4E7712FE
-:10BAC0004227813C0C819BD72C90109B8420E8EE70
-:10BAD00078BB3BC984D7D8E1310642A49909BB5150
-:10BAE00092741474A3656D1A616207DD2AA1D045B2
-:10BAF000CB3F1A4A5CA756778366B1D186ED80A109
-:10BB000050519B151D184B2AB0AC23C50089382E07
-:10BB1000CEB0C37EDF39F7D27D3B378A535356ED23
-:10BB2000EC26953A39F73CEE39DFFBFB7D171430F4
-:10BB3000C15C80071C002003D499AF650C5760FFDF
-:10BB400040492E607B9D7EEE1CDB9A6D26906DC079
-:10BB50007FAEE39FC5910AF2F4787FD1F46C5D7FEC
-:10BB600089B34037FFAE7925BAF146A55C37BEAC44
-:10BB7000A15AD75FE1BD4337FFEE268FAE9F92B744
-:10BB80005037DF2E2FD5F5D3A6AFD2CD9FE0FCA93D
-:10BB90006E1C26F5E7792700586D81611FD221C8F8
-:10BBA00000E665E1BED6F4209B08509E8193B14D1E
-:10BBB000ADB6A7531B9C9D126519D8DE925149FD65
-:10BBC00094B71FCC8BE236B6892FDB5CD8FE130B03
-:10BBD000B9B3710F2493AF1FE938F351504209F400
-:10BBE000FC3B8F09A026DECE517C77BAB0AD7849F8
-:10BBF0002E408EE04F6CA67716AE4FC57FE7E0DF94
-:10BC00003E5B684F11C0ADB827CC8FEF03F5AEF99E
-:10BC10000AAD7B54590093B01F064719CEDB6D0562
-:10BC200085FA817D56BEAE223C6C52D2E3EB86147F
-:10BC3000C6DFFBB4D7BD80F6EF8C3007E0BCCE9DED
-:10BC400067AD7205F50733146C2BBD67AD909EF898
-:10BC5000FC8C959E774A23A90E6CFFA5DFDC103281
-:10BC6000909307152BDFFF4821B6788E9607CDA15C
-:10BC7000143A3B288B5D286F4D20E4AD65EF48D426
-:10BC80008CEF6FE960CE003E6A92EF5B0C4857F094
-:10BC900059CE0E23C96DF87BBD18CF999FB11B6E8D
-:10BCA000E5EB017200D608D6C1AA79510BD1ABB928
-:10BCB0004DCCD7F8B96679FD795689FB76253D9F3D
-:10BCC000D23B6ACEA0F5D2D9614D1EF0DE3F53269D
-:10BCD0004CFA2C0D3BE55071BD04E0A4D76478AF5D
-:10BCE000CD1E0960328EFB3C9CDE4F23DDCC8CE800
-:10BCF000984C2741BF6FA3CF2BC4EB043E25CF0B3D
-:10BD00007A049F5E61D0D49F3E76FC5DE2239E67FD
-:10BD1000378B558119C0EF4DE572DA6C5BBBFE5C69
-:10BD200035D1FFAB5E46F4FF570629B8FF27836F76
-:10BD3000E7C824E77B877286713F7FFF500EA09C87
-:10BD4000B55BE44DD2242E07CE4DC897CE70949F9C
-:10BD5000BFA3BF7A909E778499D38E47F50F8CD678
-:10BD6000F37BC270AF239DDE6B7CAE6D8A899FEB47
-:10BD70007945E6E7F7FBF09D93687D4A28C488EF94
-:10BD8000C3562E17FB193C85FDDD7DB6A690C13E3E
-:10BD90007F4FF4C6F56FF55941423969C7F5748F85
-:10BDA000238547AC36929BBD782F46F738BE228D4F
-:10BDB000F6DF680199C5CF77B130769AEE7FAAD5C4
-:10BDC00002017CBEB9D5CCE97D6AA399EF635EF729
-:10BDD0009FBD05D85F89F29782473DDC7AE548012F
-:10BDE000EE7BAA0DFB785FCF3A0BD7BF95F7333EBA
-:10BDF0003F597E35797D4E95CF953EBDBC25CBEB29
-:10BE000018396DFB6E721A8ECB69E57533E77B5D71
-:10BE10002EC9CFC3E0DC43FA73EDB02517CF5BDC4E
-:10BE2000EB703E86FD59E6D0CF73C82E1C16E3B3E7
-:10BE3000DB7731615FE45574AF82A015B63292238F
-:10BE4000C1AF77895F93E96A232C8DF4558A1593E6
-:10BE50001DC2572BC4E7572DD0B4B7829E0BFB32BF
-:10BE6000EBF5BC5D5B13E4F611551E35BB576E0553
-:10BE7000DFDE749ADF7F4B23EEF30AAEA7E753D5DC
-:10BE8000FDCA4A46EA1BB1BDA0083BF8917A0EAD47
-:10BE9000FF0F1EB11FB4A396211D97D804DD17769E
-:10BEA0004757D33DE64EF17D42F66FF1D48FDB016B
-:10BEB000ED44B0F89D0A1F9D0F9C269AEF57E97E2E
-:10BEC00078FEAF9FDF80F7B5CF48E57C6D3CF46C22
-:10BED0008CF8DC592A01F1DD5E3627D767207F5ABE
-:10BEE000EBBF5A04BEEC78BF33325AAF18E8F57690
-:10BEF000F5BCB3ACE2FE104122E5737B2CCDAB8ADE
-:10BF0000CFD3EE0FF018BFA7BDEC05CEA70DF7C33A
-:10BF10006C333FF136BE4F73FB71B616F7B9DBA237
-:10BF200058D291CE1F4F6C5A7FAE0CE09D1E3491BB
-:10BF30007891633D36F0FD05C0FB3D0EDE8FF5E4E4
-:10BF4000F1FEBFF7C8BC9D31D5FB0705F759F15687
-:10BF50005719D1EB70E1335E37BEE7F2310BA7031F
-:10BF6000809BD369832A7B572266B0E1F89501163E
-:10BF700002163FFF3D570BC087F6E457F43E5CD8EE
-:10BF8000D1FD21B773CEB6D17A399DE4EA4C2FF5B5
-:10BF9000FDDDBFADA7B8E134FA09922F7F98411EAD
-:10BFA000EEB3FA6A365FDF113E6E95490E4C23F50B
-:10BFB00044FFC041062497FEAE516E3F9FC77B29C8
-:10BFC00078EE1FBA32F9FDFD91D926C1CF39224E44
-:10BFD00051F93F38F3771964BF6CDDF20777101F12
-:10BFE0008F9A391FB7BA47321C067C3989FB428ABF
-:10BFF000383FB5C9E34DD6409913D735A9729B3C5C
-:10C000007EBB4BC82552D8427102FD30A4DB6A5575
-:10C01000BE5AF02A13315E581D66D154D4DB96887F
-:10C02000E7BC446D1783B33A7B007056D367F3F8CF
-:10C03000F276B36D27ED5716EFAFF4E1A609714E16
-:10C04000735B1A39D184F707F83D520A4B737DDFD1
-:10C0500010DFF987315E437E75622024A3DC775CB4
-:10C060002DE7EDA5FD8FCBA427B6D49167C82FC0CF
-:10C070000F4C8E3DC8DF8E803EBE2953F5A0CC23E9
-:10C08000E8B6D4C5A4CFA673BB554EF7AECDF7AD79
-:10C0900070E1F3DF147E9C7188D4DB1AAD04E3E712
-:10C0A0009D80FED846FA84EF2D47FEBC6A70EE995B
-:10C0B0001EF72A8A9FA6C2535CBE01E59BE42AF9BB
-:10C0C0009EEB5CE25C9A3EAF3C74DE4AF1AE3F6CA4
-:10C0D000ACCF351ED73A3A4F1F4083919F2B57FD67
-:10C0E00073C74EC6E9E5DF99CDE97411767ADD288C
-:10C0F0009717F11CBB512E2F7BBD6999B8FEB2CFAB
-:10C100009B96951ED7FFCE9D697C5D5FE9D2ECB50D
-:10C11000D87F4495FB4B618F8DE87CCF4EA177DAB9
-:10C12000FB4E47576693FED45846AC4E1C9F1239BF
-:10C130009341715DCDFE65D9A47FE39DF33EB7B811
-:10C140007747F786F5E7B2853C98519FD6AB7ECC12
-:10C15000FF58D44AF45FDF0D5C7E07F77DD249FAC1
-:10C160007B2992E620BF77F1405A80ECFDE58329D8
-:10C1700021136ED54EF28EF6ECA265F8C73C7EDC3C
-:10C180006F7604709EFFE08567481FFDFB501B71B2
-:10C19000DFF591C747C9BFB547169C97A87DF9FB46
-:10C1A000D5878EEE87F87DB5FE851E9B4CF6F39203
-:10C1B00024ECC4FAF06B3C9E5D7FED4AA5B782EE9D
-:10C1C000F9FBB964CFFCFF76652ED931FF9B57E6AA
-:10C1D000D2B8FFF5B42EA3F8E4798F99D355F38F35
-:10C1E00045272425715E9DAA07455B9E6A2846FA6D
-:10C1F000D51C5FEE34CB09F25566F2D2FC9A8F6AF9
-:10C20000B3D725ACDB12931AE8F99CE3B569AD0905
-:10C210007279BBC7A2DA21D46AB43F2B551AAECCCF
-:10C220007B3266AEA4BE1450E308769DC7DB204B7C
-:10C23000C8E766FA0F55B12F26F17826D0660E951D
-:10C24000E17873CCA4D82B691CD725C41900DE452E
-:10C25000B388DFF74E766E95B9BF871EEA3F5C164E
-:10C26000227F0F01DB5069421CB432668AA6A0DC33
-:10C27000344552A2140FAD8C4967785F8D8F4E3BC9
-:10C280005EFD7931F0F8E85C629C83F1D0397DBCC9
-:10C290000413E8BC5ABCF431C55518CFB66C8C5A9F
-:10C2A000C85F619CA49BBFA6E947E7290F5BD3AD9C
-:10C2B0007F5E14934C4BF09E4568EE880C7DB11D5B
-:10C2C00036D20F2DCE247E0D18E8FB4FDD429F3570
-:10C2D0003DDA1233713E6C89B96DA5D836ABE303F4
-:10C2E0000E130470FF2D91657B186EB6E5DADD69DB
-:10C2F00044AF2D2796C263A4EF0EB7AD8CD65DFB7D
-:10C30000916D45455C3EC6D80FB7B08FF178C0D867
-:10C31000CF4D51DFFB7DF9BB3CF79F87BFC3BC7A94
-:10C320009A7B32CFAB9B293ED4F2EA643FA1D95F1E
-:10C330006DDFBB547A8FB5BFE779FC82F92FB7BFA9
-:10C3400077B9653E6F4AA4319BE7C5279667CBE96D
-:10C3500063F72F919CA6AC8AB1FB6BF19A3FA00CBE
-:10C36000D9288F51CC5C3FFDCB598851DFCB789CCD
-:10C37000ED5F6D09D1B8769ED872C6E7AD70B29008
-:10C380009DC5E33F2D3EBC313E07C78BE2F1A216AF
-:10C3900017C6BC8CE741CB150B1F9F31D557EFAEAD
-:10C3A000A1FBD9F9F39AF9625FB40343941FDDFD51
-:10C3B0001306DC0EA8F1A2269FC9F1E41791928919
-:10C3C000DF841B3DAFCAA5A65F5393F442F3538F9E
-:10C3D000B8047D3AC94F57939FFEDA4A7A305EDC43
-:10C3E0008D7E7A959BAF03BE7ECE4792D728EFBE57
-:10C3F000A8FAFFFB886FD84E89BDE5A2F316426C00
-:10C4000013E58BE3F9CF856A1C33DEF8232E91AF59
-:10C410007C9B1E3FADDEEFFBD2E36D6E71AEFFED98
-:10C420007A7C23FEB31ADF73A6C7F51CC96FAAB9BD
-:10C430002BE622BD7B17F54E1E3BEF2E2D9F944021
-:10C44000C79FA142AB89F21E7F9BC0018299F20770
-:10C450003C3F79DB0CB4CFFAABF93C4EBBEF6A261C
-:10C460006F83F920FCE883451CB7B9EFA5E31605F7
-:10C47000D7376F64B3090F6A6ED3DF273859E138B5
-:10C480005BE000E3F17230BFFF08E955604F894C73
-:10C49000FBB7D065090F69CB0C6D26FC82709C5BE5
-:10C4A000E9796A9C0EF89E0EF5F91D2ABE034971C2
-:10C4B000C09B83A738DEE31F6040FA6B8DA0FD2090
-:10C4C0007B7254E01D9D1161173EEFB6737BF2B98C
-:10C4D00024EEE1EF66A14D2C1E479C8F6CCB213DD5
-:10C4E0001B134F28184FE4C4E3898E173EE2F63041
-:10C4F000397EC81A10EFF1B79B4384C70C15CE657F
-:10C50000D4EFC07C3097E24459BEAB409C0B42DC78
-:10C51000AE283A9C64F72DC2EF7F71F43F781ED9A4
-:10C52000BC9F41368F3B9458694E3CEE58135CC813
-:10C53000FDBF1667AC997664A880F653E30C07FE3E
-:10C54000127E981C6774868F5B282F18134F24C5A2
-:10C55000119FB9F5B8E03449E0ACD322CC4178D290
-:10C5600034959EB7F5A5F2B8B8FED3D66CD2738DCC
-:10C570003F971A05BF2E9DFAD245EBE67E2A39C8B1
-:10C58000DEBE796AE38705A22FDB645AB7318DF2EC
-:10C59000904B9F3E9046F47C135B407D7DFDA464F0
-:10C5A000881F2E57ED11FAB7DF73FFF6A88A1B4BD1
-:10C5B000E8DF26C4F197E4751BD475414C3338EE9F
-:10C5C000B81FB8FC06F37D0B79FFD962D8C3711F81
-:10C5D00021AFAF45321D14EF95E365BBD14EFC731F
-:10C5E0002A6CB157913CFBDEE1FAF1AC89CB2FAE5E
-:10C5F0000F30EAEF95B9BF2BC7BFD538BFD28A67D6
-:10C60000A902F132D4B7992ADFF2310FFDCCC64529
-:10C6100068F975A453F994A35F131F2B5341A2FD2E
-:10C620009FB0F8B6CEC0254F0C4ACE4DB4467266C8
-:10C6300037E2BD9EB08BAD9ED88FF28AE742E9E625
-:10C64000E7EAAC387292D633D901AB717D675E7A76
-:10C6500094F033085B7E73432E510E18BDA752C869
-:10C660001BE5A30C14761DF9FB873A59D8859F78F2
-:10C6700081F2A0CDF3BA80F2CEDFD5811A07D902BC
-:10C68000E770FE0A5C31119FE7E6FB96505ED89199
-:10C69000376C1571C58895E28A55E47FB8BD15B829
-:10C6A0009D09E793BDDC3AFD552E6FCDF43C419FCB
-:10C6B0002111DF338FED3FEDD6F64B7EBF2CF2CE4E
-:10C6C000A4F7CFC9FC2287E72FFFFD5F19DC9F4548
-:10C6D000AE70BF73792405621CB71B163875C4C2CF
-:10C6E000F3F5CB98074D4EF067AFBB041D0E453CEC
-:10C6F0005C1E0762B56934FFB4FABCEFC4F2654B47
-:10C70000484E6292B38C9F52E4350331A946C40768
-:10C7100063E8F4D76E033AD952853D4F96CF1C5546
-:10C720003E733CE2DE9E53225FF16F14F50387AA4D
-:10C730006FFE2EC6EDCA91C21CA6E1C8B946F585AA
-:10C74000FD23DCCEB6DCCB9C0179FCFAC27635CF7A
-:10C7500048B6439DE1BD826FC9B86D433DB73B37D5
-:10C760008BDB0265C373E376FA7E8F6A5766091C1A
-:10C77000F7AADBC1EF9BD535DB950BF1FB1BD0F3A3
-:10C780008CC780EF06F3466A0DE86E306FB67273A1
-:10C79000F3FEE626E73D7893F39E566EEE1E176E87
-:10C7A00072DE4737F9DE5F18E92DFC1FAD8326D70F
-:10C7B0003993EBA2C9F5CE94B7D70568EC71F6E4CE
-:10C7C0004894A89BB1AF89A1CA4A992FD8484F165F
-:10C7D000CF177581BE5A5B68178BD747357A9DAAEC
-:10C7E00013F197A36234908D749EAAC46AB3519FCB
-:10C7F0002FCF079E3F5CB68BFA00488EFC46CE3F9B
-:10C8000047FE52B4FB41BB719DE94975BFF1EC098C
-:10C81000D4BB3E257D71505C6EC0C78D2A7EE70873
-:10C8200003C76D4092F397F2F7CAF9E46F26BE256D
-:10C830009E674441D9C5CF25172DE571B45C44E707
-:10C84000DBAED6BFB216FEA088F0BA2CF4BB541FE4
-:10C85000D94675129E0738F83CED7DADB5E27DDB1B
-:10C860002DC0A89E1598C1789C0AC31319C99F565C
-:10C87000DF3866899E5BCB787DE3AA07EFF79E29B8
-:10C880005AB1BB48F085E85B31E0E07597F7E7FF08
-:10C89000E3741F7F8FA8776C7088298729DFC073A6
-:10C8A0006C3850CDE5B7F9D0FC5FAEA6B8B054E215
-:10C8B000741E138FAB79D649354FD4F2AC61CA17C9
-:10C8C00013F28EF45AD378FE30DDC8DE6C67220F87
-:10C8D0000EBC27F2E06AABB3A42B814F79B5827FFF
-:10C8E0006BA3028FD5F2DB4A2564CA413A543F6CF0
-:10C8F0008EA6A0BFAEEE9D6525BB5DDD5B98CAF13F
-:10C90000A5D6BD268DDE467C2F56CFD9777484D729
-:10C91000275E4BAA53B6D65AF9F887AAFCB4D602BA
-:10C920006F3794499BC90D4FFC4B87D9081F6FC1C6
-:10C93000F89FCEB73628CEABD5435AA2B287DE7366
-:10C940006668A497DAAAB6220FC70FDB477BC97FB8
-:10C95000FAAF5D397227C703AC32C557C9FB5EA871
-:10C960001338E26B149010BD1648219A57BD40E26F
-:10C97000FCCE6AB1F37C3CCB02E674EA370A7F5600
-:10C98000D530C9437D589EC9FD71D55139735D4578
-:10C990003CDFCF5AB07132D1E9DBEA441A6E306322
-:10C9A000AAE2213E7ED73A51C7B11356BAF73DC32A
-:10C9B000FA3A9156F719AF4EA4D569FD0D5FEAEA30
-:10C9C000CA7E69A49EF095EA0367789DD81F668E9B
-:10C9D000BCA278FDC83F306AE5F455EB4638DF4A23
-:10C9E000EB067A44FD681FBE9FDA30DE57C173BC88
-:10C9F00081F7A53682F7A5E7077BA6F336DAE3E4ED
-:10CA0000EDA19E79BCAD46B1C9CFA2BAD328AF3B48
-:10CA1000DD5BCB248A53B5BA855697A8CDF7B613FC
-:10CA20009D12EA16BC9F5CB730A78A7CD47FD4E203
-:10CA3000DC8DCFFDC76CDCCEBA226BA7515CF6D57E
-:10CA400071DF3407AF0364F3BC5293874B8AD39EE4
-:10CA500049F980D769A77A41F5E079ABCCED4EB4BE
-:10CA600000F2087F8A5929EF273A283C9E73D9891A
-:10CA7000AEDF8AEF87FF1FDFFF2EF8FE485C2FB97D
-:10CA8000FDA8F29A945DD41E55ECEB12EC439F572F
-:10CA9000E0C47DA5C55CFF76788B335B13F1FC06A3
-:10CAA00091C7652D28B5273EAFA917787E1603AF2D
-:10CAB000911D7BA3D6345E1CF846AD615C645C17A7
-:10CAC000E86B107644C3FDC7D6099C6F9726E0FD3E
-:10CAD00097DE4339C5BC75707F0AF7E75F1D48D9FB
-:10CAE0004DF1775543EBB409D8AF3A990245C21FCF
-:10CAF000E9EA0BCD0D26C59E61544F500A4C28B76C
-:10CB000063EA060D266EDF6FD40D1AA433BCAFC6E0
-:10CB1000E9F78CFE7A421123FA87829467BCD6C16A
-:10CB20009C8330B68E801B17C03CBC45C3095E5742
-:10CB3000767631A72C7F7B7D2147C5193AC399664C
-:10CB400092F396B700E8BBADB17586061EEF57C1EC
-:10CB500053C15AFA1EABD4E4207F968C17909C9058
-:10CB6000FF4FC60947547F34A2FABB87D5F8BE4AA7
-:10CB70008D4BB475C9FCAF53FDD378B8634D9D8818
-:10CB800027B63454F511FF028B4D407E604B83DB9A
-:10CB9000569AB09FB94E7C47B39DEA169312EB1696
-:10CBA000A23E915CAFD0EC54F5E0D7F5C4FF1D1167
-:10CBB0008127F9F304BE597DD07594F43E7E4E7101
-:10CBC000BF1DC8E3188FA39C9920EE0536817B71A9
-:10CBD0009CA16AF19787D2887E5EF45764978E9500
-:10CBE0006E4E277BB258AA6132C7BB6FE0DF844F1D
-:10CBF0002DFBA06D2190FF5F31FB38D17DC56A0B05
-:10CC0000FF0E49F357CB3E68AA17E3BB1E4BA5F1B5
-:10CC1000E9CC6997E979839B9E2F7A394A481F2C82
-:10CC2000A1D3A1DEC48E9D93485F664CF595D4E1F7
-:10CC300079AB1B551C7CB5F0AF2B228D16481FEB32
-:10CC4000EF0E177EC5F3E82B916A8E6F6753FDB523
-:10CC500022EE2FAA0FA01F9AF0A7F34375750E4E70
-:10CC6000CF5BD10FD179B21A459D3099FF6695FF00
-:10CC7000E3F995F1EC28F911D33CA1372C2FEE7F85
-:10CC800065CAAF6F8BFB614718FBB9DF807BABF6E2
-:10CC900029739C38EC21557EC7FD7E23FCFDE0E026
-:10CCA0000FD4FD99E0E06A9EA3E1E15A5EF49E4A4A
-:10CCB00067AD7D5F6D93F1320D27CB5500BABF0193
-:10CCC00027CB251C2D8BCC7605C7EDF2D533DCC0E8
-:10CCD000CDA259A6EBE5384FC5ED34FC2CE79E7E7E
-:10CCE000467146210436917D19B2826BEF24FA6EAB
-:10CCF0008FC126D2EF50238F73869EFB55EF2FE80E
-:10CD00007BC301E620F7D3D17F9CFBE90E8C6B78C7
-:10CD10003C14B92070AA7EF1BD694798294638E8CD
-:10CD20006F55FF5CAB00B71B1DEA777DF50342AF83
-:10CD3000E338D14352224EE4976393B5EF0543C2E3
-:10CD40003F197ED7D70923FC7BC0CE36E68CE2F3B1
-:10CD500064DC28192F7A4AFD0E705CDC48F96EDF1E
-:10CD6000FBEDAB9B30E933025355FCF99447D88572
-:10CD7000261F63B4BFCDE46DE7DFFD1E640EA3EF95
-:10CD8000478FA972BF48C56F5FB40A7978F17616EC
-:10CD9000A2786E11089CF6C5836B397EFB62157311
-:10CDA0009AE89E2A5EBB50A5C78C385EBB83F0DA3A
-:10CDB0001FA33B219C7691CA7F80107F4FE3CED486
-:10CDC00028C51B4F58FAF3481FB5EF8D1EAD13FE53
-:10CDD0002E3505BA8CF4335CE77AB48ECF1B37BF9F
-:10CDE0003C596710EF14D58A7D4FD7E9BF2F4A8889
-:10CDF000D3CFD0BA84389DF793E3F43F155EFBB7E9
-:10CE0000E3E3C555C6F1DA98797B6E12B77BD68815
-:10CE10001E9B55FC2499BE4ABD6687A73838EE781C
-:10CE2000E3FC20EAB92AEE35A4FAB920937F79070A
-:10CE3000AF7F5978FD4BB333C10962FF89F5C2EF6B
-:10CE400068ED4C75FFA0C518A7A951E7FD305FC973
-:10CE5000A8C779E52FE971B359FD7ADCECD6709655
-:10CE6000AE3F3B7A8B6E7EF5D162DD784D6CA66E5F
-:10CE7000FCB69355BAFEFCE1DB75F3EFF8DCADEBE5
-:10CE8000FFD5881E37BBF3AA1E37D3E4DB8512918A
-:10CE9000B8CE63FB996E5E419BFE5E855DFA7B4D6D
-:10CEA000EBD6DF4BDBB728A0BF5F49507FBF2CC25A
-:10CEB000F52BFE785C7F6FADACE2FA25765AB7BDF4
-:10CEC000A1D44E714C6EBE90576DDEFF0085A782D7
-:10CED000721032000000000000000000000000009E
-:10CEE0001F8B080000000000000BE3146060F85185
-:10CEF0000FC1D3F9191836F323F8F4C0C7981918DD
-:10CF00008E83302303C33E20DE0AC46B80F83D03CA
-:10CF100003C352203D07882703711710BF048AD529
-:10CF2000B1623787858D81810D884F02CD3AC54C1E
-:10CF3000BCFD8A7C08F6215E0686B5407C9497BECF
-:10CF40006130D8F00C41FAD9F50C6AD76ED181F76F
-:10CF50003708B38A3330304A20F8FD12A8F26CE269
-:10CF60000876960C65769501F50300295128158001
-:10CF700003000000000000001F8B080000000000FC
-:10CF8000000BED7D09785445B670DDEE7B7B49BA28
-:10CF90003B9D9095257480202A4BCB1201113B219B
-:10CFA00089010306440928D26C2184249D01661E50
-:10CFB0003EFDFF6E0842C4D1898A1AFC195F83E0E6
-:10CFC00004079DE0A0139DC0348B8833E804C70597
-:10CFD00097795F401E204212A338E8F3C9AB73AAC9
-:10CFE0006EBAEB763769B7FFF97FFF840F8ABA55BF
-:10CFF000F7D4A9B3D5A953754F149D9124DD40C82A
-:10D0000025F8A1E5AB0A2124255876489DC3E58182
-:10D01000C1F6B55E1771190979C06BC272BD379D33
-:10D02000B8AEA0CF47EB8AFC1642EEF7DAF1F9E38F
-:10D03000DE122C1FF59662F988D78DFD1EF29663DD
-:10D04000F92B6F0D96F77A8BB0BDCEBB0AEB372A62
-:10D050000BD2605C425CA6AC64423C2F0F1CB981D1
-:10D06000D6D6678E4F9047D3FA5FF5449F45DF1BB6
-:10D070002D17F987D206B9A4286B74B09F8AE78D63
-:10D080004A5E5F80F3F8581DEB67AA792D3B72BFAB
-:10D090002C3286E2395646FC89A564727672C47ECB
-:10D0A0008301DE2343D93C89DDF9DAA0C8F0AE065E
-:10D0B000780F0DE5F825DB270F8A0CCF09FD7EE5FB
-:10D0C000E4F0D23B0F0F8CDC6F0CF4AB7372787D05
-:10D0D0007DA60191C71D0FFD62E013C589105F8B0E
-:10D0E000D19F9DF5FDF9455CF42FC5A763AF79EBA2
-:10D0F0000609F9370DE8B4D6BEFCCC163A4E7BCB08
-:10D1000030A7DE41C8672E6782DD1213DF6E81799A
-:10D11000C4C0B752182706BECD8D916F0BA05F0C0F
-:10D120007C5B02FD62E05B658C7CFBD94F846FF712
-:10D13000021EDF836F1B62D4B75FC5C8B78D31F2A3
-:10D140006D538CFAF6648C7C7B2A946FEA73B5DCA1
-:10D150004124B48B372A253BA09F27B3CD3620EB43
-:10D1600027C1BF3DDF53EFF6C7C8BF5763E4DF11E8
-:10D17000A04F0CFC3B1A23FFDE89917F1FC4A877C8
-:10D180006DB8CE58E4AFDA8610FCB93400FEB5D8DD
-:10D190004F5DCDEB7AC03B89908C7039504BCA51B2
-:10D1A000940799B8DBD9BA55F0CDA51C425698E83A
-:10D1B0007FE9FBBE3C12D0D3F17D36E2AF9584FE11
-:10D1C0009F039E84E47F732955E8EFD345EC4F74A9
-:10D1D000D0FE30C815E5FF66EF102CEBB91C6D2EA4
-:10D1E000D2A13CF8920D285F4F789DD8DEE01D8BD0
-:10D1F000E5635C2E3772397A00E4EE0A90C3522E52
-:10D20000574CEE0829719453BA76EC89271B1C28D9
-:10D21000576609F09499BCDDBBE7CAAD1B28FCCD6D
-:10D2200035BA2BB785C8D91345AA7C51C94C0EF61F
-:10D230007BA2FC846DC150A4B70DE03414EBD47E06
-:10D24000BED07E0DEEEE7EBDA0DF63C55CBE641277
-:10D25000081DF7B1D2EE7EE912A5CBBD12296DB241
-:10D2600084F3658AC4F4942A0AF243E6F4DD9F77D6
-:10D2700096B4D1F76DF6916984964F827EA2FE39FD
-:10D28000B054DFAFA77476537A641A494D13E04B5C
-:10D290005A2585E22B8F7524821C3D34CE45242BE4
-:10D2A00021FDA19D8EDF67741BC9A265E2F83622BD
-:10D2B0000D837EB49DD653787BC650DA4EE13C0494
-:10D2C000EDD6607B2A6F4F73F0F7AF63ED0F7B09EC
-:10D2D0008EAFF6BB8FF2D94DF15B47F1C5E7C5C400
-:10D2E000057494293BFD21F39F2DE971DE95BC5413
-:10D2F000F1BF2FFB54C6FCA1417CCD832F66CC0F20
-:10D30000C1EFBEC173B0AEE263BEA212EBFD57F532
-:10D31000A69E18D707124EE7D49903847687EC446B
-:10D320003FCD71444F7C945F0E2A9E91F8F3051512
-:10D33000E71F54FF5C8C1EDAF6BB3574589721D278
-:10D34000C1D05BA4C3BADE221D0C7D2E4F8729926B
-:10D3500003E147A3873AEE862BC571E3AE12C7DD22
-:10D360007095386EDCD53FCCB8EBFB89E31A33C53A
-:10D3700071D7678AE31AFB7FBF7189ECA40F99B953
-:10D38000200EF8679E60DF2E10F7C3A0DF60E7F481
-:10D39000C9413B27DB4B88DB12E42791E9CB39A15C
-:10D3A00070EE14EC2A85F37F381CD7E5E1D8357090
-:10D3B000E66AE16CE37048A89D0E8343EED0CEE3AD
-:10D3C000B7FCBD802E647CBABE92126BE87B4ECD5A
-:10D3D000F8B76BC7DF0D760CE6A1BBECF80E0D5D60
-:10D3E000E768F1D9C3E110DDE5E841EC1A38B3B5DF
-:10D3F000700E713801E9B2704AB5F3785DE5AB247F
-:10D40000AC5F941EC382EF75E4759E423FE845C54C
-:10D41000B19DB64B7FB2066EA0FD8F6C91FC465A53
-:10D420000FEC8DC7F5E3FCB6E958DF778D11D7898E
-:10D43000F3CEC97E23B527935E78DB06F6A5EA0511
-:10D44000BD0C75DDDE8F6D6D142F8FB1F5C1EBE86E
-:10D45000F3CE17F4642B4A63A10EE87E8ACB2659DB
-:10D46000C5EA656656ADDAB2EF4E805BDE6C2466C7
-:10D470000AA7EAA525D3AEA3F5258715025DAAB6AE
-:10D48000AF36F4A6F5A57EA909EA1D79A41CF469B6
-:10D49000CDDEFF6C87F5E8FC6E251BC63F4BD70938
-:10D4A00007B5C747ACADA933291E15FE5D85F05EF3
-:10D4B000C54EC9492D1CC577FBA10CC07787E43444
-:10D4C000527A2F6B8C270ED5DED1BFA776EB71FE7B
-:10D4D000CBE9FC0985B784D417023DAB803830BE58
-:10D4E000D3E8374B417D3BEB3D8CE3A9F5AA1D7496
-:10D4F0003CFA7EF5739213A65AAD236EC0B3FD2598
-:10D5000073E9531698E76AC3602BCC6FBD01FA2DFF
-:10D51000F1CF7FD1EC003CB7180A01DFCD5B0C6581
-:10D5200043817E645EC950C0EF2F227E0D7A17CCF6
-:10D5300077F935C6AD7AE0A72530688635DCCE9E12
-:10D54000A5EB952364FDAC20CCEE13D96F983E2C4F
-:10D55000F8FC257D22CAC1B2463D7184DA0D2E1F2A
-:10D56000BEA384F9317BACFEED59413E2EB77379F1
-:10D57000E57C5C9EC8F92A77E6CC18168ECF83C06E
-:10D580001723F38FA07C98AE9B0EF47F1C48BFC777
-:10D59000A8FFE440FFC889CF9FA07E12949BA99F5B
-:10D5A00004E593D44F82D24FFD24E8B795FA495051
-:10D5B0006EA37E123C7F9AFAE7503652FF1C9E3FC4
-:10D5C00043FD7228777A7DF8FC396F1D964DDE7A1F
-:10D5D0002C9FF73660B9DBEBC77E2F7A1BB16CF658
-:10D5E00036E1F397BDCD58B6780358EE053ED332F9
-:10D5F000E06DC572BFF7189607BD6DF8DE21EF1913
-:10D600002C7FC9E96E9B4072652A2F3617B1039BA8
-:10D61000928A5DB9E0AF2495B07AEA1DBE5C03AD95
-:10D62000A7BA699DD2B1776520D748EBBD6B587B0F
-:10D63000E63D24CF44EB993ED63EE097AE3C33AD79
-:10D640000FA867ED8337FBF2E2687DB09FB55FB549
-:10D650003390174FEB5735B1F6E12D649285D6879D
-:10D6600007587DE411D7242BAD8F6C65F59C0F7D99
-:10D67000936CB49ED3C6DE1F7F2E302981D6C77728
-:10D68000B2F6895F937C3BAD4F2412D6F32CB9F9E7
-:10D6900089B49E6767F5C2BEF3654784F57DAFD256
-:10D6A000B6104CDACF7539B932F513F61ADA56805E
-:10D6B000C95DAFBB21571E47E9A79045D0BE49576A
-:10D6C000C4EA06B212DA7FAB9B8EF5FD8A03DBF764
-:10D6D000E8E6B0BAC181ED7FD52DC4FA41C585ED2C
-:10D6E000C77595AC6E7061FB67BA9FE37887143796
-:10D6F000B62BFAFFCDEA0637B63F2CAFCFCDA7FD4C
-:10D700002BF56E8F8ECA75ADE42E2703415E9BD23A
-:10D71000C11EAEE37EEB2C9D03E57E5D8601F56CBC
-:10D72000EF7FE53C857A063FC9502F7B1AFC5E0AE5
-:10D730006715C251281C7DCF70267E33568033F189
-:10D740009B7215CE6A84638E0DCEDE6FC68BF87C1D
-:10D7500053A1C2D9A0A3F6BED61ADBBC265E9A207E
-:10D76000E273A95285F308E293181B3E01E55A01C2
-:10D770004E4059A2C2D98C705262C3C7651827C0E7
-:10D78000711996AA70B6239C8CD8E0040CD789F83E
-:10D790001896A9709E43FAF48B6D5E2EE3F5223E37
-:10D7A000C62A15CE1F109FACD8E0ECB78AF4D96F0B
-:10D7B000EDA64F00E164C736AF3C9B489F3C5B370A
-:10D7C0007D5E433857C60667BF4DA4CF7E5B377D6D
-:10D7D000DE4438C3629B575E82489FBC846EFA7CED
-:10D7E0008070AE890D9F8329227D0EA674D3E72415
-:10D7F000C219131B3EF9A9227DF253BBE9731EE146
-:10D800008C8B0DCEC154913E0753BBE9F305C2B9D1
-:10D810003EB679E5A789F4C94FEBA6CF258493EBF3
-:10D820006E447C0885638D0EE7503F913E87FA7504
-:10D83000D3C7A407380514CEC09EE114668AF42924
-:10D84000CCECA64FA21EF462726C700E658AF4399D
-:10D8500094D94D9FDE88CFD4D8E655D85FA44F61C8
-:10D860007F461F8FB173921DFCC644E2DC4A5F996C
-:10D8700094FCB383B0EE2816E204B047A4C036800F
-:10D880004FD756F44B65A7EA073909F8B9C536876B
-:10D8900013E2017AD5DF21ADB81FB1EC4C14E24D93
-:10D8A0002FE9F38603BE56EA1586FA3D0963E304C1
-:10D8B0007F2BD19524D47B15F516FAA7940C10DA9A
-:10D8C000D34AAF12DA33DC23857A9FF2F142FF7E2E
-:10D8D000357942BDFFAA2942FF2CDF0CA13EB06E74
-:10D8E0008ED03FBB7E81D07E454385D07EA57FB95B
-:10D8F00050BFBAF15F85FEC39AD608ED239A370868
-:10D90000EDD7041E16EAA30E3F21F41FD3BA5568C3
-:10D91000BFF6D83342FBB8B6E785FA75675E16FAEC
-:10D920005FDFB95FA8DF70F1CF42FF5CF237A13E45
-:10D93000C9F481D0BFC0FE91D07E63FA271A3F564A
-:10D940008C5FD4E612E6CF6618D09F0D580D58377D
-:10D95000EC35B3FD0DD493210E518C75C3FE858E2D
-:10D960006488070000EA4FE4F62EBF02E255BF18B4
-:10D97000EFBE02E2B8BF30B847D823F841EDB2FBA2
-:10D980001E3DC6135B25920EA54307659C9EC713DB
-:10D990008C4C7ED767E53CE50BD183BA7ED4BFA023
-:10D9A000F5F57A8AC798A0FEACEF57963E3F649C87
-:10D9B00075FD0CA55B87B2E70B2D305EC97D309EEF
-:10D9C000C7D03918F0D28E631C305618C794598EC0
-:10D9D000E36C84715282E31833CB35E3984AB7F293
-:10D9E000E77C9CC7406FA28DB37EC078713E9915CD
-:10D9F00038CE16CD38EB332B34E3C4B1F9D0E77C05
-:10DA00009CA72E378E71E004713EFD2B719CE7B40C
-:10DA1000F3E95FA919C782E3C0731887F4A5BB981F
-:10DA200034CA67636719CAC19FCC182733F4A9F8B1
-:10DA30000DD4C90766920DE338E8B8B41F199244B3
-:10DA4000859A907FD127217FBE88A3FC0F89A705E7
-:10DA5000F7E33EDCD72FE628123FC588EE93AAB93C
-:10DA60006C2EDA393D73858396CD07063D02E36C53
-:10DA7000B43AB369BDBD7992616104795A5CAF9CD7
-:10DA80006A0B91F3EEFD591E195243C75F116747A8
-:10DA90007CD4BA5A26E9C4E727E8BE8BD0FDC987F3
-:10DAA000749F42E87EE52385ED33FF9DEECFA0DE37
-:10DAB00046F767D04EC86A7CEF048F339FF8A5E421
-:10DAC000077A7F71D7CF145C277CE4ADF4548826A5
-:10DAD000B09F79ABE2291382F8CDF7F512EAD41C96
-:10DAE000F7D1A5E3BE16E3079D2F19FD5B81AE7547
-:10DAF0007D284D79BF0184BCBB77EA21C986D53E1C
-:10DB0000BAB184CCAC995E90865A24F55B4EF19CF8
-:10DB1000B1FB1A85BE41DA95B63B9D96205CE25278
-:10DB20004E007D4CF40FC0B9A588D643C6BFB5449E
-:10DB3000ACCF2272B04EF97D523F80B0F83F1FD774
-:10DB4000E15280AF25748E1994D5B3A01C09CD2C59
-:10DB50005E536A67EFAAF878162A2480FB6B5F0A87
-:10DB6000C4B1892F19FBCD51F7C91AFC4A1593ABE3
-:10DB700084D2B574BE1EE9AAC5F7FDBDF12EDD70D5
-:10DB80005AD63DA24068B627FC67BBC57652CEC6C2
-:10DB900053E9AACACB29CEDF13C07F5A9E06FE5393
-:10DBA000BC4F72FE07E598F1DF63744F03FE776E9A
-:10DBB000D213E417E7FB6D9CEF8BEB45BEDF06E766
-:10DBC00071B4FF6D2BB358BCA9A197C05F3A719196
-:10DBD0000EF50F1550B31A86FFDFB91CCCA9DBF583
-:10DBE0000AB0F7F672CDFC381FEEE47C98ABA1C703
-:10DBF0006D9C6F7339DF9610DFBD1918BFF02B10C5
-:10DC0000D79B5D2E11B0179EBB55BEB5097C73AB7B
-:10DC10007CD3E07B27E7DB9D7731BE69F16EE37C47
-:10DC20006B6BF84C2103C2F1D6E2396F95665E3E0C
-:10DC30002DDFEAB95CDA0DE04F4D77E5AE3819D249
-:10DC4000FF96A2C92B4E86D8855B4BA60BF559A52E
-:10DC5000B385FEB3DDF385F6DBCB970AED736B7E00
-:10DC600026D4E7ADBA4BE83FDFB75A685F58779FD5
-:10DC7000D0BEB8FE21A1BEA46193D07FA97F8BD076
-:10DC8000BEAC7187D05ED5B44BA87B9A5F12FAEB1D
-:10DC9000F65E7933C8D791B7F504E27D179CA731BA
-:10DCA000CE78C1A938A1CF49AF03E5F8947708969B
-:10DCB00067BC4E94F3B3DEB15856834C8E033B7B66
-:10DCC000C002F1534F1CB5FB89741D97C7ADA99BCA
-:10DCD00000EB0D6D1F4FC8BFCA37ACF1F5A55A0058
-:10DCE000716F4AFFE20603098C2254BA7B77CB732B
-:10DCF000A73EA4BDAD87F60699047A85B717B74548
-:10DD00007EDE21750ECE80B8EC7B46B23D24DE1857
-:10DD10007EDE42FA805F11ADFD9C8E94879EF76C8B
-:10DD200095D939CF117DDE5699E2556960FA5FF9D0
-:10DD30007C461EB1413D30B8C67299F19A283269CD
-:10DD4000C0E78182DE2F69B83AA8E704C661F6749D
-:10DD5000A97F94F07C59E375C27B6F48EE2D80C794
-:10DD6000B97D7A5CAF49E040E62DC3003FD7561934
-:10DD7000D6D1E614F4BB5ABDAE15271542DEF41613
-:10DD800061F996B704CB77BCA5581EF3BAB17CDF16
-:10DD90005B8EE587DE1A2CFFDDBB0ACB36AF0FCBDF
-:10DDA00013DE3A2C4F7AEBB13CE56DC0F28CD78F85
-:10DDB000E5596F2396E7BC4D58B67B9BB154ED6790
-:10DDC0004FF27786AFAF67410E8DE1727670EDBC92
-:10DDD00035757D837276582E433953E95BDC60E4F8
-:10DDE000F2902AC8C35F611D4E0179E9A1BD41E1EE
-:10DDF0007218EDFDC8ED206FBD7F047923640DCA54
-:10DE00008105E4EE7BC81B8153841490A73E1A79E8
-:10DE100012E550952355CFDF904ACE817CA97265DB
-:10DE200091993FA4CAD5FDE02746F0B77A2B125F3F
-:10DE3000FF987F4402B93A20D9727E5E417C2EACB5
-:10DE400077F1B16B29B856E827FB87C03AD235E4A1
-:10DE5000ABC110DFEF3A4685202BFAFCB4F2129DDD
-:10DE6000EE2EDC3F94F929F37B85B79BE3185DCD5B
-:10DE70003A524446C2F972CE3137E567DC9FAE1E96
-:10DE800009FB66FA5C264900C7EF9C1EE1BC800CCA
-:10DE90002248E79EE8ABF63FF5C47FE6C0B9BF0570
-:10DEA000F49CCE3DEE80BE86E9EF53CE5B42CE972A
-:10DEB0003C46673AC4C13BB30D76E63F4C12E94895
-:10DEC00026E1F9814AC703D95F0C86F399FBA81CA8
-:10DED000827E750D1A9C402E231F3DD9FB9EE8B90A
-:10DEE00000E61B133D0D04CEB9283DB7C27DC758CF
-:10DEF000E9D9939DECC93E9ED8C0E87C84FBA7D1AC
-:10DF0000E8AC9E8769F1B84591391FB81C933B3442
-:10DF1000F42F15E8DFD7EAC0FE07F77E9009E7780F
-:10DF20005DBBAF48204343DF2F60E73DDDEFE70BEC
-:10DF30007A20FDE9EF99B03F3EF8C2BB58AE254CC0
-:10DF40000F375A4AE62A6382F062BD47106D5E1EA3
-:10DF50004512E7D5837E76A4AAFAD99A09F2B49B32
-:10DF6000DB81B0F9F5209FEAFC0EC0FC289CA920BB
-:10DF7000D3741EF972C95DC2FC46A7E0BC7B9A9FB0
-:10DF800027C140A411143FABC14012A83C2AEEB5F2
-:10DF90000AEEEB9C6D3E8853EC8D77D65296786CEA
-:10DFA00067DF0838E03D319EB1ACD15C23FA4F8980
-:10DFB00035A2FF945113EA3F751D7ECAE6A6F82DDF
-:10DFC0004FD7D79CEC05EB9C8BAF736C5D55F1ABD9
-:10DFD0006ACAAAB10870C47A57BD54C4EEE13812B7
-:10DFE000664638EF53CBE5E9061CE76CE3C004183E
-:10DFF000F7ACD754C3D6577B0D1B37BD26747DAD08
-:10E000005C155F73725410BF68707F68FCA8449001
-:10E010008F4CB02ED2B681D1FB47E5A7FCB901CF1A
-:10E02000D55B942FC07F370F51FD7719EB2A5C4FDA
-:10E0300093DE671C01CF770AE3D1F71CEAD938BC1D
-:10E04000175D6E64724AE5A71ECEBB08DF1F98906D
-:10E05000CF6E0A3181C2EB902D7520577E85E9B3D2
-:10E0600087CB6995A9CDE07620B95B41AE178C5579
-:10E07000E5DC31EB036AA73FFE8B82F7CCC8D714EF
-:10E080007A4EF0AAC322526283A0EA82DDCB8A6173
-:10E09000DDFEF8C59BF83EBD3E07E67D9EE88AC0E2
-:10E0A0002E9D276FDA4685E8EB6985C5B1481DDBF3
-:10E0B000E7F8E81F98DFE27A71DFB3A441AC9791EB
-:10E0C00019A9606FCB362AC44F715F0AFB2675DE33
-:10E0D000D4FEBEABD811B925A4661DECD31F53588E
-:10E0E000BC67819DC87DA8BDAEFAC3AF7320EED3D7
-:10E0F000AE307F573D0F5F9AC4F6831533FD061788
-:10E10000EDFFD1EE51B7518B4BDFF7AF43FF673ACD
-:10E11000716E27E1745F5827E2D713FE5A7C553F92
-:10E1200028EC5C9EE391DC2845BC2FF535B773AA3B
-:10E130007E2419EC42DC274D5357E540E172E0574D
-:10E14000DC56430AE33BF051923B0DEE907E866035
-:10E15000BF24C398E8FD8CD04F8FFDD258BFCE426C
-:10E16000DC1F132A4F4383FDCC41787DD9B862BFB1
-:10E17000AA3F3CFBA28FCA4BC5EF1EB511BA6E7EFB
-:10E180002CD7A73AE9F3CAEDF7DA5CB43C23FB6C71
-:10E19000C0CF8FFDFA88F77D6F31A8F470592488BD
-:10E1A000A771F924753E8C537CB15DB1E33942A36C
-:10E1B0003160A4F259BD7B6931198EF5E3ACBEFE26
-:10E1C000533DD49B457E55FCE6D15407BB27C4E2A2
-:10E1D0004924807E6EF5B6FF2884F5C2433A51CEBD
-:10E1E000B4EFC1F8179350AFE71B12C2DBF16270B6
-:10E1F0002ABCCF7E3CBBEFFF546F8372F269D02301
-:10E200008F464ECAB9DF0AF482FD7EBEC19A8CF6F3
-:10E21000FE5A722DE8BB4A17E267FE6BED8EC78788
-:10E220001FA7789DDBF6179B3434D44E3079EB6A08
-:10E230005AF86F265D747BD24EE531D44FA280F13F
-:10E240003D4733F7BB5B5859A9046C701FA7728B0D
-:10E25000E2A492482A9FD513B89F40DE33FA213EAC
-:10E26000BAECD957DE194FE9BF6C97925CCCA66324
-:10E27000915283FCF1D0BFAB4606F951F1FB570C2C
-:10E280008E61ECF93D4941BE2CDBB5CF408685D38C
-:10E290007152D33E439B25027F9A8E17C27A5BBB95
-:10E2A000E31F06882B7EBC57226959E1EF976F79EF
-:10E2B00005D73DA013F293F3AB9B7F617C0B4C7BA6
-:10E2C0007934F6B3833DEC896FD9B09F4B41F97E29
-:10E2D000EE65B8C7F4BED10974287F6E850DE6736C
-:10E2E0005AAE6172FEEB7B5341DFCB155FAA1D4B2B
-:10E2F000F6BCFCC99FA3FC2D39FAF354F41F882BFC
-:10E300004387B6D99701F35CBCF9569C671971A392
-:10E310001C96FF5A5F02F74C2FC8A46857043DF9BA
-:10E320008B81ED5F4E6FA5CCA5F33C0DF8817D7B15
-:10E3300053EFDF8E71F39FE13DB89FF339D3951012
-:10E34000EB174C8C5F5B0C3A351E6A12E477DBFAF4
-:10E3500056E0D3D97EAE3438F7A074F071BA49973D
-:10E36000285CFDD18234C627E29073F87BD4DE4F5F
-:10E3700082E7D0BF557199870BEF71FBC8C65FC9A3
-:10E38000C7A778C7C1FA753A35B2FFF70F3E3FFA13
-:10E39000D34A42E42C44DF99FE6FBB8FE9BBAAFF4E
-:10E3A000FEE945D0FEF95B4C8FE03D582F285E8199
-:10E3B000346CDF375342FB40F7D991F47C9BC2F5B4
-:10E3C0005C6CA73B1C5CFF5539A1F8CB5242A8BC42
-:10E3D000D07192900FB83F2EDB48DF0FF1CB3C306D
-:10E3E0002EF633049F87AC1B4BB85D38A4B107648D
-:10E3F000734A4C7E74A5E27FFA09D0DFF78C4E9FFA
-:10E4000003F4572981F97FB2F3C03B73A89C7FD2F4
-:10E41000A4EAAD6857B57A5BFEFC1812496F3FB1AC
-:10E42000D07D5724BDA5CF23EAADA50DE5F9FF9614
-:10E430005D55E9D7AEA11FD8C7971DD1E9A8B58F03
-:10E440001B0C8E88F691FEBC4572C2E550953F5577
-:10E45000EE2A7E5BD51FEC50B77CAAF2D72D9FAA7F
-:10E46000FC69E72BD24FDBFE07D06F8AD7EDA64DB4
-:10E47000D3C07F3675128CC3E7CED4E33D4DD3E7CE
-:10E4800084DDD3B8231EEBB3F46DBF079FF083AADE
-:10E4900059C3609DBF9DF814766E5FAFA01FFBF55A
-:10E4A000A54B13E87CE670FADE4EC93D95F2A35405
-:10E4B00096027114CFD932F12524413C59222742CA
-:10E4C000F0B8BD5CACC3CFC4D4209C9EFA7F5BBFC8
-:10E4D000FBBB9647295F4F6413F2372871FF411D3C
-:10E4E000EB10799ADEC2CE313CA325FF00D4C336AF
-:10E4F000B924641FE13132FB7334FF963140BFDC35
-:10E5000059C312989C0FC6FDA287DBB12E9F230131
-:10E51000EC7B57CB40DC17761D5E687547B067070C
-:10E52000B89CBDC2CF613A2C52BD9ECA7D07E9445A
-:10E53000BFC66731478CCBCD31AA769AF38DFEE802
-:10E54000E9F8A55C0E67D357134686F06DE6D48FC5
-:10E55000655B381FE0E744C8BEE2FBD217E41AE867
-:10E560007BC0DC565812217E53C9E93771FF9706EC
-:10E5700058F7F25B7265A063BE452FC4431619B904
-:10E58000BE0E254301AF89FB973E3086CAB1E7B086
-:10E59000DE69A6F3F3B47C6A7047D8DF69E909F055
-:10E5A000C1BFDC6A64FEF2DB4AC962A0EBDBB7B232
-:10E5B000F3DEBF199C5591F04C37337F733629B980
-:10E5C000305AFAE9D1377796359047E9D16561F746
-:10E5D000B5C3E58FE97D975DF2AF96400EF5AC9E31
-:10E5E000CCEE371712F7031324D4F71B42ED576E06
-:10E5F000F3F467E13E4D758B64D7D1F66AB9CD006F
-:10E6000072EC69DE2583DF7E9383B8707F2DD70C93
-:10E610009B1912FFA2CB1ED2EBC05773E6027D3FBF
-:10E620009B692480976BE8A73658FF3F6B19857A62
-:10E63000106D5EAF7BC9B47C05E0307BA69587C2C8
-:10E64000E478A17EEB24D217CE81271ADB5638233B
-:10E65000F02FDFC4E42C66FB66FAFFCCBE4DA0F6BB
-:10E660008DC9B5126ADF2CA630FB9616C9BE2D5F88
-:10E67000ED4803B958BE67207EBFB5FCB5C52991EA
-:10E68000ECDBAB7CDFFB1ABF07DED197DAB71121D9
-:10E69000F6AD2FB56F11E2E45FC46ADF4CFF33FAC9
-:10E6A000F72AD8B708F3359B44FB56D4B21AED5B72
-:10E6B000515FBD705F8998A87D8BBF9C7D9BFFE8F3
-:10E6C000AD58579CF111E407E80AF6ED356EE760A6
-:10E6D0001CB0733798587C33563BD72F563BF73FC7
-:10E6E0004467D5CE2DEF27A1FF122E87CCCE2DCF9C
-:10E6F00062766EF91E66E79667333BA7B56F796160
-:10E70000F68DBD5F3D84BE8FFBC7ACC7EF80FB8439
-:10E71000A58AD344FB173BD4EF276AC684DABB1B18
-:10E720004C32D239CCDE393FC5EF607AB2777F0503
-:10E730007B978D766C10E891563EA60C8A17EEB347
-:10E74000BDFDE5A9DFFE0EF4E5753DDE177A57C77E
-:10E75000F6477BBF3C350AF4EE2113B3BF4B4C8C1C
-:10E760009FED5E1FDAD3494399BE57DDC3E857BD1D
-:10E770005B62F35DA9F73B601DF8EA22EE9FE7EECE
-:10E7800061FBE759C6D69478B897F42F0A61DF7D0C
-:10E7900090E2F921F2507AB102E380CFC7D9B6C234
-:10E7A000FEB2542626F063E71D9EF231F8AFF32E39
-:10E7B000D6A1DF3B0F9EC33909BF27A1DEA398D3A3
-:10E7C000BCEB953E24FC7EC44423E3C3C415927F76
-:10E7D0004B16DC4710DBE769FCFA757C9ED49F453D
-:10E7E000BA90BFEA23C6EFD669E9E164F3AF5AA94C
-:10E7F00017E9512345A407E568F1FCD4E0FCE7BE26
-:10E80000D0B6AE0FB42F95703FA5D2433B4F953E87
-:10E81000EA7E651ED7114FCB2E05F8A59DBF4ABFD6
-:10E82000B079ABF4D4CCBF4EB51F579361A06FEF56
-:10E83000EADC0F8C01F9F833A503C5EBB6D9D96929
-:10E84000A1F6F8416E97A6BA8FE7A73A806EECBBA7
-:10E85000C439E5BB5E49A5F3B9D9953512BE1FBED3
-:10E86000F52B831BE20B07CC9D68DF54F9FA84CBB0
-:10E870007B80C379BBB73D1FD79166C98E7A13D011
-:10E88000D82F7E7FCC730FD3AB03D23FD6F5198D33
-:10E890007485658014AAEB10F081FE776A0BE38320
-:10E8A00007F840FF3B8D741E023A57274BCE00F409
-:10E8B0006FDE752FC8CDAB66FA1CF4B75C72B2EF91
-:10E8C000CB882523F5B2F22947924F0C4EE404D7AA
-:10E8D000C579D02F29DCEF98686C7D1BF09848F53E
-:10E8E000610B09F74354BE0FA17F2E45BAF7D383BE
-:10E8F0001C7FCCE5F355A0B705E8DA69007FC613A5
-:10E9000060EB87DAEE911DF9481F95DECD747D1816
-:10E91000CDE8AD8B40CF9BD53AA7A7A74552E0FDE8
-:10E92000C974FFDA4B82D3AD2F0FA9720CDFC36914
-:10E93000E901F1808C10BD07FB147A3E59DD7C148F
-:10E94000E932652575AF42E80E76EB72F489A617B9
-:10E95000D5CD3F8C5E7CA2D18BBDE6CEBF8C80F83E
-:10E96000D71E09ED03694914F6FBF166E6671C3012
-:10E97000BB517E3B5F53F0FEB9D68E7CCDE51EF6D3
-:10E9800017A1DFFD4D8289809DB39BC9472A1E03D5
-:10E99000981C85DAEF57CD6EE45734F8717C1D8EE4
-:10E9A000E63FA9F51B613CB88FE810C70BF32F7841
-:10E9B000FCA7A779A5F171BFEBBCBACF3349AB81F6
-:10E9C000B0F8FF0A63C8B9D46DFC5CA03B4E16ECEE
-:10E9D00067375DA61FC45F0274DEAFEE7C0AE3BF3B
-:10E9E000E79F393E0DE477D91FF5C444F9DCBED367
-:10E9F0004A02ECDE8501D6D98ADDFA88E72884D47C
-:10EA0000B2EF1C7F6745FB52F1BCD15F4CDFAF78A2
-:10EA1000F1A3E110B76A5FC3EC8CEF192E1FBEB6ED
-:10EA2000E170BE5E21B373612DBCEBB8BC9C7B2949
-:10EA3000BE14ECA4D4C8BE5FAD689AA51843F6E92D
-:10EA400023CD0A8E4BFBE1BD65DF0E09E3E5E1F85E
-:10EA5000AD66F07630FB57D1ACF8E13BD88AC62DD5
-:10EA6000B8BFF5347E6A00BF6ED2EF9E65DFD73641
-:10EA7000EBC5F861A33E60C438A7FEB87138D35B1C
-:10EA800049884755A15E5637F13899267EB4EC7710
-:10EA90007B5EF451D22CFBFD6F6C606FCEB66EB70F
-:10EAA000617CAE91C5DF648B1C393ED7535CAEE907
-:10EAB0003E1E979B7A9A0C0F8FCB9D85FF503D9CF5
-:10EAC0006FE6FAAAC6351B7BC5747EBEECD90B4F28
-:10EAD000C279D2B9E73F7912F0AFFCE6B327EF86EF
-:10EAE0007389BD663BAC7F9E67DEC6F8BBFADEDD90
-:10EAF0005CCEDB77FCE6E927A81EB6BF67C47B5B6C
-:10EB0000ED7B4E67C2F78CEDBBBE4C85F8E6CA3D87
-:10EB100005B89F59F9C2A4B4CBDD3F01F9F4C77021
-:10EB20007EA2E5C781DD7A02DF739E3F6644FFA3C4
-:10EB30003BCEDA54C5E2D70E1E5FDD19F9BC4A8D13
-:10EB40000756EFBEE5E6EB611DDCAD381DF89CC74E
-:10EB5000077B8AABBE45F93A2206FEEDE4F1F3A647
-:10EB6000A911E3AAE7E13F944F9BCC625CF5C2EEAA
-:10EB7000C5FFF604B4EDEE1535AE1A88816EEA795C
-:10EB80005899D9B5CD0CFAF1FC6F318E0D7CA33EAE
-:10EB900039697FF64226C423CE289D77E23DE53DC4
-:10EBA00046BC6754B1E75DD497F6178EE23913E19E
-:10EBB000E751EDA4FB879D1BF0BD8E679B95C56358
-:10EBC00039FD215EEBB0E1731E976572ACC66BA395
-:10EBD000C569DF37B3FB50EAF95CD5B60F0C4413B7
-:10EBE000FF96C602BF8E0BE78AEABCB5F0EC408701
-:10EBF0006B43CF1FA2C5C3B95D0DE3173B7768DF39
-:10EC0000C2CF23BACF1908E93B12CEC7D9B9B9C7C9
-:10EC10002FBD1B89BFEAF9C3DB5AFDF4C776EED0DE
-:10EC200033DEDF8D2EAF9AD9FE56A5CFB9AF23DBE9
-:10EC3000E94EAEEF749DE930E3B9315B67E6F175FB
-:10EC4000A69AD28D7DF7C6F03DC7F781E79ED1FB2E
-:10EC500061BFBCAEE900DA5BAD9E571316FFD28EE2
-:10EC600027C531FFA0BA79DF70B047E7F6BF84F25D
-:10EC700057BDF3B8C147E11C6AFCBDA16D6850DE09
-:10EC8000C18EFB43ECF8B9E7F60D67E72291F3B4C8
-:10EC9000D8387C4F8B08DFB3F35301FE325F93C14A
-:10ECA0006EE9799CB3B26B16CCF76CAB42E03EFBDD
-:10ECB000D9267D913FC2B89FC13A362648A77556DE
-:10ECC000F61D9F3EC9807EE64AEBD863F0FDF84A08
-:10ECD000ABC101FBEDDAD5EC5E65EDFF72A6035F1B
-:10ECE0006A136FC373A37A0D1DEDC9F65CD887DB79
-:10ECF000F34B46835869ED41A24B27E0BDD25A94AD
-:10ED0000E6B0405E2FE6A710D989DF19EA6D854588
-:10ED1000300FBD5D6737475C5F193CC5C2F266289E
-:10ED200076F1BBBFEF900783403E8E6F9D07A353E4
-:10ED30009307A3FCC6FFD7F260F8609C9F401E8C2F
-:10ED400000C677D43C18C93F721E0C882F8D0EC99F
-:10ED500083D1A9C983C1F9F8CF3C18FFCC8301A5A1
-:10ED60009A07E39D0D650590A742CD83716683A741
-:10ED700000F252A87930BEDAB08AD5791E0CCBFDEC
-:10ED8000AB0B42F36064DEBF01DBD53C18CEFB1F4A
-:10ED90002908CD839177FFE682D03C1833EFDF5E00
-:10EDA000109A07A3ECFEE70A843C186BFF50007929
-:10EDB000305E8F77B7C6A544CF83D11CE788290F73
-:10EDC0000685F31EC2899207430B275A1E0C0AE7D9
-:10EDD00044DC98E87930C2F089920783C2F904E1F3
-:10EDE00044C98311864F943C1814CEE738AF287974
-:10EDF00030B470A2E5C1A070FE0BE144C983A185C7
-:10EE0000132D0F068563884F899E07230C9F287951
-:10EE100030289C048413250F46183E51F260503868
-:10EE2000E908274A1E0C2D9C687930289C2C8413F5
-:10EE3000250F86164EB43C1814CE55F163A2E7C1D7
-:10EE400008C3274A1E0C0A6714E213250F46183E12
-:10EE500051F260503813104E943C185A38D1F26079
-:10EE600050380538AF287930B470A2E5C1A070A63B
-:10EE7000213E51F26084E113250F0685330BF189A1
-:10EE80009207230C9F287930281C37E213250F8620
-:10EE9000164EB43C1814CE528413250F86164EB469
-:10EEA0003C1814CE728413250F46183E51F2605060
-:10EEB0003877239C287930C2F0F9AE7930CC814183
-:10EEC000D240CC8381F938BBF360247FEB3C18BF80
-:10EED000027CFF9907E39F79307E8C3C18B75ADD9E
-:10EEE0007F8FC77DE377CB8371265E9337A2873C04
-:10EEF00018B75A4BCE823C7FDB3C1817E2BF5D1E31
-:10EF00000C3ACE3F2E374EB43C183ACBB7CB8341A8
-:10EF1000C7912D632E339F287930122C62FE901FEB
-:10EF20002B0FC6B1F8249C4FB43C183FB97C137426
-:10EF30009B05FBB4E9288AE427937F62B485C70D5B
-:10EF40007FA8FC1330E99C9F52FE09358F41930244
-:10EF5000EBE1FB9CEFEF70B9F880E7A13816350FB5
-:10EF6000857F2AC677978A7928A6703ECE768BF25F
-:10EF70003085B0739429F959FE5AD8AF976BF25087
-:10EF80000C11CFE98BDD47F3293832D529CEE328A0
-:10EF9000978769A59F1E04F6DC3C36721E8A199C71
-:10EFA0001FD3357499C2F9369D97B7C3A739549EBC
-:10EFB0008BCB8FCA40D7698E3619E3F437A9FC731F
-:10EFC00008FC9BC9E16AF19DC1F9376332E39F16E2
-:10EFD000EFB7807F14EFB7CA4721FFB4786BF1D445
-:10EFE000F29F84F23B247F482E11F34F4C3289F973
-:10EFF000270AEC62FE891BD3C5FC13931D62FE89B0
-:10F000009B8688F927A63AC5FC13378F15F34F4C1A
-:10F0100077ADD6E4BFB84F93FFE2214DFE8B4D9AFA
-:10F02000FC175B34F92F7668F25FECD2E4BF7849C5
-:10F0300093FF629F505F58F79AD07F71FD51A1BE38
-:10F04000A4E13DA1FF52FF71A17D59E3C7427B5569
-:10F05000D3A742DDD3FCA5D0BFA7FC036FF1EFA17E
-:10F06000DFE1DF431FE3DF43BFDF43FE8B772C4B42
-:10F07000D785E6BF78DFE2590779098E5B1C3CAF84
-:10F0800040E4FC16DDED51F25F04DFFFF6F92F528C
-:10F09000927FF87C043A2BFB1EB0B7254F674DF9E1
-:10F0A000EEF9086E2D11BFEB9E552A7ED7ADB3B297
-:10F0B000EFB567BBC5EFBB6F2F17BFEF1E11E7960C
-:10F0C000000F6DFE8BDE1697CE0AF692E72908C078
-:10F0D00077BAD9106F2BC2F220E4BFC886785B29BB
-:10F0E000968721FF052DFF0CF92F687904F25FD078
-:10F0F000F20DC87F910DF9337C3C7F461DCF9F51A7
-:10F10000CFF36734F0FC197E9E3FA391E7CF68E20E
-:10F11000F9339A79FE8C00C239E13D8CE5496F2BB9
-:10F1200096A7BCC7B03CE36DC3F2ACF70C96E7BC46
-:10F130009D58B67B2F62196BFE0C552E3F04BFE124
-:10F140000A189FC9B32AA7573FF0C8BAD0FC1923A1
-:10F150001ED884721A2D6F460E7CD397123D6F46CF
-:10F16000777B94BC19C1F7A3E7CD481BFDE3E5CD40
-:10F17000986BF961F266CCAD11F33ACC5B75F9BCD2
-:10F180001923E24A6E41F9E3F238D7125BDE0C9F95
-:10F1900055E2DFE553BA80DF45E982EB750F790769
-:10F1A0000E5A9F1E02FB89AE21575D36DF83562E15
-:10F1B000A2D39BE57798F323E7CBE889AE6AFFF704
-:10F1C0002B581E87B9966F992FA3877C0B07B3BF67
-:10F1D000403B196BBE8C9ED6879EE839E347CE979D
-:10F1E000D1935DEDC99EBE3985D1B9770F7456BFF5
-:10F1F00097AE34B51EC297ED2E546D997F0F9F3B8D
-:10F20000D38EF1998E9DFC5E9C8B38ECA9EC7B7DB6
-:10F21000F0373B9E4F184EF03B7E3B7151FEC4F3DE
-:10F22000E7D2CE7DFBE05EC05A1B71252681B34735
-:10F230001CFA81B00FBBC604F19AAADD9FBEF1474C
-:10F240000AD7DCA2C7FB721D148756F4FB5C89C089
-:10F25000B778F24BDCA7C319DDA55EA1DF756B7E25
-:10F260000F0774490D9E3F15E82DB86FEADACCEE12
-:10F27000B3EAC9D58F4F188DF7C689DF81FC433FAC
-:10F280007519C7B38B106700FAEFB4E2FDD525AF4F
-:10F290002D34C0A070DE1A1A37E85524C6811ACC66
-:10F2A000B6E1706F2F5DBDBFE773B5821FBE88C327
-:10F2B0004D2911E3449F2C283A0CFEF3227719DEE6
-:10F2C000AB482B15E346847F470FDB32F03365C232
-:10F2D000EF75FAD97DCFB0EFEA9BB7209E4BFD9A30
-:10F2E000FB4B8D625DA5DB392BBF9762219698E8B9
-:10F2F000D676C5E31392BF3DDD8CE922DDCC0E91BD
-:10F300006EF14344BA68E966758A74D1D22D61AC56
-:10F31000185F53E9A6DEA7FCA1E89664E3F73C82F8
-:10F32000F42A31A5A2C9473C33E400CAB7561FFAF4
-:10F330005802F01B7E48BF64FF6A7CCB6995C16EA2
-:10F34000A533D0445AC4DE8B077D80FCBDC489FA46
-:10F35000A0FE3E8A78F22197FB8FC8255AAE987E90
-:10F36000F0F802DABA19E46D04FB3D1A18AF4A222C
-:10F37000B89F5388D30EFBA826AFC9B94881734DF7
-:10F38000E25C940DE799762C1FE4DF3B770C25B8FF
-:10F39000EF6F0A7C9E0AF7061E1CD9390DE20F9EFC
-:10F3A000C5A404D6AF59096C7D5DC64B5B028BCFFB
-:10F3B0006C28D111D768F87D4A7ABF44C76BB7BBB8
-:10F3C0005EBB01FCD116763F80D83BDFB81DDB4722
-:10F3D000E1F7E119BAFA6B001FDA1FBF2BEE68F9EB
-:10F3E000C8B630C40EB7373F7225DC6BDDA48BFC8A
-:10F3F0003D73818DFFFE1D7E3F654430DF42816D90
-:10F400000CE6657870001DA77A7A17F25195CBEB60
-:10F4100038FD0F964D41FC5E68911C10AF2BD4DF78
-:10F4200071D3308ADFB8B7657EAF97DD5F1FCDFB44
-:10F43000D79AA9FEA2FDAAFF1BFC9E95974ECA98DB
-:10F440000F71744D19DE13FCA3ADF030F02BC7D54E
-:10F45000340AE429BF2511CF713D1F12277E9AD5AA
-:10F460002ADE07CCE1F7B673DA881F84E2DA63623A
-:10F47000FBB836B17E9D66FF39DFC6F5D4465241F2
-:10F48000EE367EAD9760FDE8E824CE3514DF8E457C
-:10F49000BD71FC8ECF09FA891D5FEB8B22DD8F5980
-:10F4A0006E63FCDB642068BF379559F0DEF9FEB26D
-:10F4B0008AFEE05F7C7197BB7FA43865889F96C009
-:10F4C000BEBB772590B120876B2546EFFA8C92085A
-:10F4D000EB962A77AA1CAAF2975116E78E740FF5BD
-:10F4E000339B8472965736443280FCEC9530FCD5C1
-:10F4F000BE86E2759975DB47D6F4017C3CCD9FE171
-:10F500007D32538BE48A744FE7619B8DDD6F5CE342
-:10F510005B0DF7467E419508EC5486A13E2B127C8C
-:10F520001FD9887EE95D36077BCFC4F320C9F51962
-:10F53000709FA2BD79D2E47514CF27A83EC07AB5DA
-:10F54000497122DEBE2A42F09E2C8FD7F59D46B629
-:10F550006C08F17F37DB721B6D145EA38D7D6FD954
-:10F56000CBED94006FE77FFDC306F03B2E1A917F31
-:10F57000BDB9BFA9BE7780D3675C826B2BBC4FE05F
-:10F58000979F51E3E374DB9C8B46415C9ED23BC466
-:10F590000E06F9E663F951DC04CF3F922C3A94430E
-:10F5A000E27239ECC27D761FEA8DAA07242011C8C9
-:10F5B00053A0DA37A9450A58A9DC8F365902708F53
-:10F5C0002EA99CCE3B19F29A9818BC56F99C18D7D4
-:10F5D000A2F29803CE3DC1ABF3104805F8AADD5363
-:10F5E000EDE5DA44668FD63E24635ED4CD729B1976
-:10F5F000E2A9592E471EA4884C921D78AFA65F3908
-:10F6000071520C49FCC05F2776FB0154C9AFF94623
-:10F610003F2FD2775B176DCCDF1E97E0FE33D06BA8
-:10F62000F8E1CEFDE02E38CDA417BBFFC5ED04F701
-:10F630006B0AF97A37EE3F74EC7BD1C00D24F43BB2
-:10F640002AAD9DD86466EBFCB8EBD9BA37EEBC05A1
-:10F65000D7BD6E3B515688EBD4C8965107E09EC586
-:10F66000C80F997E126E1FECF40FD029E7B04F0F30
-:10F67000F4F9B67641CB6F123075D787EAE01C8675
-:10F68000EA5BC8FB67357664C5F441B5185EE6727F
-:10F69000D4FF1EA7DE1D4247EDFBDD714AC9D4FD34
-:10F6A000DC3110ECC8113DDC0BE9C8A5F3A3F3DF96
-:10F6B000C8F525F173FF6498D7C6961BCD20DF6B84
-:10F6C0000379F662FA4EA2A9049997485C18CF19FB
-:10F6D000493D32C88F518B4241FD41A58424A4C0CD
-:10F6E0003DB42221DE432C493CFF4B00F9D22DA72B
-:10F6F000548E43EFE5AAF2A99547557E6BE1A0052C
-:10F70000CE0721624E4BBDD484878146B2D90EEB21
-:10F71000BBEA5FD6727FAED69CE9C7EF977C19E84B
-:10F720001FADE4FE51ADA5D084E6605F32AEEB2B99
-:10F73000217E42E9B03285D979753E5AB9F45CD45C
-:10F74000137FC83EC12377E27D44CF45033E5FA7C8
-:10F75000B807C0FC55FA5CC3E9A3A58794C0F79D20
-:10F760009C2E3DE39B63877BC1892617598FF8E662
-:10F77000E13DEEA6C04813ACBFF76AF08D01CF6B38
-:10F7800013C684E3295BA2E099CCF0BC8EB8FFD805
-:10F7900046E53767455D6D3CEA15792B3D275CAF43
-:10F7A000B47AA4EA8D1AE7BDB6B2FE005EBBED41A5
-:10F7B0006F3CF18C2E4EA504EF5739F7C4A31DD131
-:10F7C000EAD3E77CFE9E7846BF058A7B06CCCFA3B2
-:10F7D000EBCC043919EE20BD8A2992C39BF5A8E72A
-:10F7E000A435B67BF8AA7FA5FA55DA7EAA5FA5DA1A
-:10F7F00063F51EFCDA04F77C9003A999CA2DC5A70E
-:10F80000D6CEF64B9B6DEE4580573CC53D0EF68D32
-:10F81000430259ECFB5F512FA2E941BC46CE9B024B
-:10F8200032AE0B3EBA2E644BE178A8E30F4A48642F
-:10F830007CA45A0EEB7DDF1CC206AB269837A7EFDF
-:10F8400070E28675ABEF48769F714D02B3BFB50984
-:10F850006CDD52CBCDB692BB51BF65E2338EFCEE70
-:10F860007803AA70DF7C6D82EB2EA087A9C885F390
-:10F87000E863274EF04BFBC84D127C379A54E99051
-:10F88000D83D7312FC7E8BC2EB53ECC8057DED03B3
-:10F89000FB6BE8DF1239CFD8A309EAFD5EE67F3AB9
-:10F8A00049771EAF471398FF7908529FF42A56F301
-:10F8B00082A9E7394E09E8D46EBD0D916EBF2031A3
-:10F8C0003F3D91D14BBB4F00C287FEFEBD7B0D4437
-:10F8D000362791E0EF59D599D0BF8F27CE26B05764
-:10F8E000BB1206F0734C671DD47F25779A128706EA
-:10F8F000E55D95E30727CC70422A52DBF55DC361D5
-:10F900004F45E57A27D0BF7D42D760CC41493A3395
-:10F9100099FCB8F442BE20950FCD8AC00733ECC3E2
-:10F9200043EDA4D53004FCD17629CE09F72CDA9723
-:10F930004A0C5FC9C4F329C9C23CD3E3997FDDC136
-:10F94000EDD53B09592827AA3DA6F3AB83523B0FBF
-:10F950008F11EF7490CE3DF1FEAD706EA5C93FA939
-:10F96000CD4F3969A105EF7F6CDC63C6FD6B57098C
-:10F970003BC7EF6A31A27D8EA6B7696DE688711C20
-:10F98000B5A4F47B0BE897A6D424823D4C9B7BD294
-:10F99000067CD7D2A543F25D7308F645AF2B11BFA5
-:10F9A000BB55CBF4F49B1217D1FEE91993B1549FC8
-:10F9B0003758E488F7CD4F73BD52E5F14A3A22DF5C
-:10F9C0000F9D06793CEF7EF31D1709DEDF6F88631C
-:10F9D000746C886374EC728F4F781AE4CD9781FA57
-:10F9E000B0583D07E5FB7F35CF943ADE46AF29514D
-:10F9F000A62AD0B0608A19D68914E29A3C1B947565
-:10FA0000A342E03BA2C7BC3B12F3318E6D12EFF96B
-:10FA1000DAD9BDE1CF3716E077DEA9648D7930A55C
-:10FA2000475989CE09F183F30BDEB7E9A83C2DE8ED
-:10FA3000D39A03F2FBBAE226F63118EAC2FDC99264
-:10FA400052833F40F996DC400D05A5CB7F03F9D4E6
-:10FA500012800080000000001F8B080000000000E2
-:10FA6000000BB57D0B7854D5B5F03E73CE3C929922
-:10FA70002433794E1EC009E19D108724BC1F4E9E81
-:10FA8000448830BC0485EA8028CF2488D6DFB6DEDF
-:10FA9000CBC444F4A2B745E9AFF4D6DB7FB0A2A84B
-:10FAA000200182069AA41340E4113408A8A8AD519D
-:10FAB00029620BC908EAC5D67BFDD75A7B9FCCCCFF
-:10FAC0004922D8DE4E3EBFED3E8FBDD75EEFB5F684
-:10FAD000DA872EC977134B64CCB7D8C0B64A8C7D71
-:10FAE00087BF1B43ADD96E602C89B196383BB54EAC
-:10FAF000E70CC7D284F07E8563693E63D5D6D85CB7
-:10FB000016876D7F3F8B85F18A58EAD202685BAC1D
-:10FB1000AE5A95B12546AFDD0ECF774EBA3CA48ED6
-:10FB2000E12FD8DF3392B12E236B94E2B01F606CCB
-:10FB30000C4350F8CFED56EDD097F0FFE1FD448B2C
-:10FB40002D20C3B8CCA35CECB0F047BE1B281E4DE3
-:10FB500066CC285E939ADEF846CA652C76721163ED
-:10FB600070DFCA5C8FB22CB8318CA99E18C6A2D89F
-:10FB700033F6F3D98C19F07D584757F3BBFD7C0061
-:10FB8000C71FFEE54A0C83FB1F29C118570E6317D8
-:10FB90001E3C15E3B6C1F507E5723FF46F4740C65A
-:10FBA00087F0926F870BA3197BC4EE1981EBBA63C0
-:10FBB000DD7F8FF1DA42F7D903703195B1157E19E7
-:10FBC000E7E6F0C27FABB65919B384FA95F509118F
-:10FBD0007DC018E1B5D2CCD6D4DB7AD26305D2038E
-:10FBE000E65DB17D8B295DC5F9BD93ECD0BFA0C0AA
-:10FBF000AB80EF0B0D317E5F66089E25DB4799D207
-:10FC0000E1D6474D6616807530A5DDC86C84B50A0F
-:10FC100009F0E61578D3C379B8C54AE3DDF57F6509
-:10FC2000BF1996BA18E67A201E9E6F5A51C1727B90
-:10FC3000AEE3AE3FA8652940BCBBFE4D623E953F9A
-:10FC4000FF601E3CFFC0235F20DDF4EB5CEC337EE5
-:10FC5000D211B16E376300CF3241EF3B1F8DBCBF75
-:10FC6000ACE9311A6729F39A909E776DD4DFBFE92A
-:10FC700033E4BB654C095D073C5C3E9265453CDC6A
-:10FC8000618F493C0F20038F8DFD0EDEDF7D6460A8
-:10FC90009C37A7277EB5F6E23AE06F33637F5E6755
-:10FCA000A1F6C23A46ED08BB4AF459DD74F27EE48F
-:10FCB000AFAAC65D261CA7C5FFA78409F04861D37B
-:10FCC000373232572173DF7B0EF0F92326B3EF0072
-:10FCD0007FBB19E79FF546CF3D48AF1BAF96D37D5D
-:10FCE000FDFA1769FC7F249EF86711AE3B17AF2B16
-:10FCF0005FF6B6AE9FE2BA809FD95858977CFDEB6D
-:10FD0000D2D6A3AD4FBB5F2903DFF5F2BEC6EF230A
-:10FD1000843E58FADCACF569808ADAE6CFFA7710CF
-:10FD20003FB1D328BF1A3F2D1374D2F38D46C76E4F
-:10FD3000FE68FA775A9F463FE07FA7C1896DC06988
-:10FD400018D7934FF47CA1E7834E63477F945F3DC0
-:10FD50001F744A6C416FEBFA37FB405AD752D55D9E
-:10FD60006687FB7731CF7A3BAD67235DBFA06C3CE4
-:10FD7000FC3394ABE7385F77EB3933973776DCE8C1
-:10FD800047BDB936464D71D804FD80CE9DBBCC3EF3
-:10FD90007C4E9BE7FC3AB77B9011F15E4EED9FD70E
-:10FDA00079DC830687EEDFFDAB2BB12ABCDF358C17
-:10FDB00095A3DC77C644C2BBCF2E133CFB900EC884
-:10FDC0007F4AFBFF7C803AE9B9F631A847CF7FFB39
-:10FDD0005FB11E78BEEB5B73796FEB3C2DE807EAF1
-:10FDE000E5B413F8EC762167B73755125D963C33CE
-:10FDF000CB84FCCC1EE0F8B4C01FEAD7B6A8D86705
-:10FE0000711D8B1B24D2237A7ADCE59AFA39EADB5E
-:10FE10003BFD85F47E0FFAB0C789BE77213D86850C
-:10FE2000E831D6A1727854F803BEB943F0CD7965B4
-:10FE30008DC9007AE4FC33806F007995C2DCBDE99E
-:10FE4000C1FE0ECE877DAD47BF8EBEE05FF65CCDB6
-:10FE5000FA3486EB1F654AEB45EF68EBBF8BB9625E
-:10FE600049EF88F5B28E1B495EAB2D7C5E6D9D2BF4
-:10FE70009AEE9C817C51B519E895D973DDA8771766
-:10FE8000F7026F997CD16881F7BA1E905CA86FFB6E
-:10FE9000A283A627EE12F85AB96DF10C349A8B6141
-:10FEA0003E3913F5D1176FC624A25C415FFA1E7A62
-:10FEB00035C91F9B711D8CE37B09E07B8374FDF4C6
-:10FEC0005BB6B9D03D28ECB915FE9BDC83C2F59931
-:10FED0008EAE6CDBACD0F364B7DD26B4C7F10EA1F7
-:10FEE000BF845EEE5BBE60E100E7DA1D0EB26F6CB0
-:10FEF0008D83F46375D31653B8DDD5E44B93B7B156
-:10FF00000E3BF15955E313F41CE85FD501FD4A4B54
-:10FF1000C7CF6F55C3F0394ED051AE30A1FEEE4B76
-:10FF20007F82BEF9B2236C9D231CC2AE08FD7B2DDF
-:10FF3000FDA0C1AD1F57D3071ADC1ADF6BEBD1F35D
-:10FF40007D5FF0E9E9C2989FFB0B3AFAAC427A84F4
-:10FF5000F5115E05F0DBD66CF53F04F0B6491C7E6A
-:10FF60005F7314C1DFE92C769F033FAF2A7521B57B
-:10FF700027F0C554F4EB3CD3109F9A3FC70A1222D6
-:10FF8000FC247DABF93779C29FDA1BE5CE07130954
-:10FF90003F4F02F2C3949A8E391620D9AD8EEDE50B
-:10FFA0000A8C3FE5898E3951D05FE8D8C1FB5B3BB5
-:10FFB0004E595C8CD5B057CA4BA07F3BA013C7BB32
-:10FFC000565B60F62C44F95D0D7E9205ECD1EAD3C8
-:10FFD000430EA1DCAD6EAF2897C0EEAC0683238143
-:10FFE0003DAA74C706ACB9D46713E0B9E7EDDE6586
-:10FFF000C42F57EBC86EAD3EAD70B9399248EB5780
-:020000022000DC
-:1000000000F62878AF2E1AFC55C0575DBCC5559B2D
-:1000100049D77D51F1D877AB6AD8758D1EF81EC2CD
-:100020005167606E07B4AD4787C4757C8FDD6E5D28
-:10003000C72A14E08383EB2CD4EAEF179AEC83D021
-:10004000EE151A98B7377DF9A483FB8DC0E4E94813
-:10005000E7AA23269277FCA11F5829F451151028EE
-:100060000EE0A93CCD02D1B1F85CD9E70AB60D1279
-:10007000FB24C25F61A1BEDC37DCD7DB56E17883AD
-:10008000C3F984E3A948912A94B0794B6C51117D4E
-:1000900039C5300CD7C3E468D756C0AF9C6E58B38F
-:1000A0001BD62F0F8016F0A1D85DF2626837164F6D
-:1000B0009197405B6BE476B5D6C09687E3E90581FE
-:1000C0001FADFDC0E1D98A74BFF456FB182BE9AB14
-:1000D0000C3BC9B9586FADE40A50DCD4CA5C5BE193
-:1000E0005A9DEC619C8FEB19F2F11B621C97D9B001
-:1000F00047057E6D747C40FCEB8A33DC9B09FDC0B8
-:10010000131FF17EBAE14A26F0F781273ACA15900B
-:100110000757B6E1CA40E81F7AE2637E7F220C09E6
-:1001200006EAF0139F94FB6C382ED7676CBB3B1B21
-:10013000E7510C12C9A972C0E4AF85FFAD8BE5FC95
-:1001400054073C82FCF786B0B3EB6B8A5EB602FFC5
-:100150002B456E750D8CE3C78069F4DFDF6A7894F8
-:10016000AD068A53B0457CBF29D6ADD18135B8B331
-:1001700067A15EA87767CF8E41BC7A4F225EF3DB22
-:10018000DAA7A03E6E78FBFD31E8AF22BD709CFC83
-:100190003688DD603D975EEBB7450E8B473F7014A8
-:1001A000BEE3003996DCDC9F94543B5B047257EB52
-:1001B00066AA09D695A28BEB1A18D72FCFDB3D7F05
-:1001C000C4F7584680EC4DA1C3FB31CEAF8F5759D1
-:1001D0007B7CAF7A59AFB74CB90FC8E8E7C4A737F3
-:1001E000BEB704F5FBEFCDAEC12AC2E5660F003CF9
-:1001F0003B0D4C61F1C426C394028C3FA35D1B50A0
-:10020000EE5DCCE90339C3308D80845FE298B0B8ED
-:1002100055AC07DE2F61D08E45F86EA0F5C9C857E2
-:10022000A3984746FD3586F9ADD87635BFE644BC80
-:100230003D19C5EE40BFCFB28DB9FD61FA63403CB8
-:10024000F7F726251809EE6863FD6CE4D7E82F98C8
-:100250001DFDAAAEFF3429383E08C874BCEE3A6CC6
-:100260006008E70B46BF3D0EFAC1E18AFA2C0B8D00
-:10027000D725E8AD8DFBA4491DEE407D93C0FB2F33
-:100280001472FB1CFCDCE47F3613F16359E30F931B
-:100290002F673CF75BBD4945F1F1D0D63747339C1A
-:1002A0007F6C4BB401E9F0F2F6BC28E4879D881B13
-:1002B000587FBCD97E0F8E177F05E0CDA4EB6EC2B0
-:1002C000ABA28E8A03BC4E9866533700DE5F88AAC5
-:1002D0009F86FC1FDC6160CFC2143B4DAE59D8DF56
-:1002E0007959B5A3BE7D21B33E9AD6B3C340EBD9AD
-:1002F000191D1CB116E0DE304C2947F8142B535061
-:100300000F2B8622F51EB83E349EDB574D2F2F88CB
-:10031000E7F2F3A404F3E7E17385243FA5B28DE48B
-:10032000AE2BC8FC669827696EBB8CF4889E05AC22
-:10033000847CAF046406FD491E46498D4936A35F9F
-:10034000257DEBB62D06BA4F11FA76CA87AB2B780E
-:10035000DCE33A3D11C63B6833325CD764D621A357
-:100360003F38F92A7305907FAEF278C60E7FE83FDA
-:100370003DAFF3074BC578EEA0BD042F17B2483F41
-:10038000AE7473D9E712CDA32A68A78B2DBAFBE808
-:10039000E7C5621B193795C50BFFA63FEBFF1DE9AB
-:1003A00037E05E98EF3E3B9FAF54CEF915AEAFAB52
-:1003B000DCE4423CECB2B9DF9D887AB1DDC8B6B26C
-:1003C000BEE5E979883FFDE0730CBB6A65FE7CE21F
-:1003D000471BAE67C4E68DBE2858F788417C7CE495
-:1003E0003BD42343FF333101F5F855A15FB456E305
-:1003F00033E4277B1CE727FB0D2139BC333E939E5A
-:10040000D3E40AF90CC7D96FF42FF4F46227813FC3
-:10041000EF44FEDC656314473D966A598072A5CDB2
-:10042000F3BCE0637DBBBE666DAB11D7FD15D80391
-:1004300080BB24EDAA29DC9EEF49E27C552A7F4B44
-:10044000FE766793C4D0CF4F6EE2FA3B9C3F527B5F
-:10045000E78F5F225EAFC51F5ABCB0FB87F2C79122
-:10046000BF8F3F365C933FBE8D453CDCD75C9CC262
-:10047000BEC7BF6914FCD0D7FDF156AEE7F4D75F15
-:100480001178DD67DA383D17F5C0CD0617CA395047
-:100490003F7D36AC635F347F8F296BB2B0BF4BE1D9
-:1004A0007A65579399F4CA2E9BD74B76DC6961E83D
-:1004B0003F30C5DBF133D4876916754318FF2E8DA5
-:1004C000E7FC566F0C8CFF0CFDE2A39CCEE36ECED6
-:1004D000934DF05CEA522EE705174C5B300E2B4D26
-:1004E00028DC817C74027516B4D5E7E029407CD500
-:1004F0003913E9BBD75A4E96617E11FC1E37F2D9EB
-:10050000D8FD27CB8A72F079AE4FF78A56EB8FC7AA
-:1005100035C5B3EE78D723ECC678C6F59207F92433
-:1005200037D4676E23C56B1A3FD447033F805CCC3A
-:1005300067AA3116869C73CEF330984336A73C9257
-:10054000CEF303D3283E9C7BBAFD55D0CC6C9E479E
-:10055000775FF0C17C1D1F809D3D1E8FFED2F18014
-:10056000C980F399D664737F684D16F293264FF4D1
-:10057000033CD5FF61D8B31BC2EC7B6C0297A3C7C9
-:100580005D0ADDF77598FC83E1D2BF33FE5EBDB036
-:100590003F9FA33C63FC70DF2B0BD18EE62F771FB0
-:1005A00044FC4F4F92E9FA2F58C09285F47129E428
-:1005B00097D51BD5E2CFA4D0734CF10CB3C1FDFD90
-:1005C00049D1F9387F6982F722D28929C123F8DE1F
-:1005D000D80979F9285FB6517509688F34B801AE2A
-:1005E000F2ADB6101C1A5C67055F94262CBE88EB32
-:1005F000C7F750BF347E7CDE82EF6B74AF6FFE8234
-:10060000D33B8CFE48EF10FDA53BB0AFE1E12BA141
-:1006100057B4FE3F4A7F2D7F704DFA637E20F6EF80
-:10062000A2BF352129447FF0B3E2B1AFF7B3EA4D61
-:10063000E077E7F4BC5EE828A4E75D265821FA5588
-:100640002D1077A23C7A1DB42FB0C7CEE7EAFAC3CB
-:10065000F9FEE022B2C109F184F76A537008FA2169
-:10066000A30212F985A340F01791FF95417ACF2597
-:10067000F0C4CE4BD2F961DC45FF2E1DFDC3400214
-:10068000FA51A3CC1501E4F7DDD629E9E8D7E559FD
-:100690002765215FBD3AECBEE368825E4D5BBEE735
-:1006A0003935E4FF68FAEDA018569BBF2081EBA115
-:1006B0001B41DDA21F882E63381C9A3E47F2201C86
-:1006C0005260BEE13B2BE9E5A60EA0C78D0807E00E
-:1006D000A155620DA8CF0B0DEEC462F4D392020AAD
-:1006E000F7F7BEE98FF9C18AA637DE43782B703F52
-:1006F00004E35097F162773E62604F3F58F357B47E
-:10070000B840F367B4F813FD1EBC3F405CB79B01D3
-:1007100040B447018BBF06E67FF2B23ADC2DE456C7
-:100720008175548875CC64ED0417FBF6BBEF260188
-:100730007D66087C541C81B83117EF337633E0E1D5
-:100740006685C79337BB207E0CE3A399E322FBF8B1
-:100750009B921C1AE75ACFEBEDC044DDFECC3FDA8A
-:100760001E017BF409B8CEC7D6F1B874C240D9A730
-:10077000A0E11C9769407EAC16F60DC2E85EEDD292
-:100780004BC22F9E60E8C875017E5BF7FF8DECE0E1
-:1007900081FD7F7B07FDBCF19F2BCC0CEF4FF8BC9C
-:1007A000200EF5041BA7125F69E356FFA9C1CAF822
-:1007B00075E2FF2AB1F6C3008F7B28C267A1F677E6
-:1007C000179FDC84E37D794EE1BC2DE62F3379075A
-:1007D000611EBBCCC4F3018725EEFF68F70F1B0138
-:1007E0006EB8BE2941CB0BB493DDC79F398CCE3791
-:1007F000633E202F44D79B2F947FAEE4F6A40FFED8
-:10080000FE37F2015A1E60ABC01F3B78D6A4025CD3
-:10081000531BEE51D0BF9EEA94993B6CDE9B542B48
-:100820007387E5039E49D0F923075FDC3403EC4965
-:10083000759BEC8A42796DDA753C17FBEDB2CBDA29
-:100840000B1FE9F13BB5E91E05F9DF98A8927C5F23
-:100850006BFE0923804F6E40BA33F2EB3AC748244F
-:10086000477AFA1ED8FFEB848E9CBEF1DD17FDF5AA
-:1008700074F8DDC522DAEFB9163DF47CDB02EBF447
-:10088000C1FA02B04E1FF85D07D6D9A97F689D93C3
-:10089000FA1ABF5637FF3601FD368D4F4B1338DF3E
-:1008A0008CDFB72981D942F4D2F0F5A1B0577BA3F0
-:1008B000347FC3356F065C3A05768718D4C7DA9D56
-:1008C0006342F66BFEE932F23734FB355F5E544A21
-:1008D0006A53D82F4C23A35ED3DBA9B9EA6223EB7A
-:1008E000CD3E2D88EC97B76D5462A867203A4992A7
-:1008F000C087F0B33538CE300FC1A9A7A706971E21
-:100900001E6D7D9A7F3D5FD06FCEA04C23C2DFC3AA
-:10091000AE8A75E2409887B85EBBFAB58E9FAF5C31
-:1009200028792BB717BEED8B7FF5F7357D508613F1
-:10093000E451EB43BFC298984C742BBB6A626EB013
-:100940001B2C238A7D1A665758C550E29F7B851D54
-:10095000EE8B7FAAAECACC9B1FE22363E31356E45F
-:10096000A37DCA462BE62727DB66D5C6019E4AFE35
-:10097000543417FDBCEA0E03C3145669D31707316C
-:10098000AEAF7E8FB9502F1635B51623DF1D52DA64
-:10099000658AB3BF64EC89307FB1B1A9D68AFE54B1
-:1009A00063A24C71FC6107E74BEDFE9644AE3F1A23
-:1009B000CF5D9EE1EEE5FE1971BFE4E33CE2A3B238
-:1009C0004741AE310E4D8AA1BC4489649F53817E5C
-:1009D000C84D46F2F3218EF923EE035E6A34EFC26E
-:1009E000D47E69E323F7D88110F5FFFD698D19F3F3
-:1009F0000BB324D7B3F05C991A6CC57ED9DC4CAA32
-:100A00007B18FB3F32F9B3C15B25CA8B9401BB60F5
-:100A1000BF6C51A61FF313FB25DEF735F37D02668D
-:100A2000F725CC8079DEAE4818B581784AEB0FCE39
-:100A3000DBC0042387C557F7ED9549CFDC572AF96A
-:100A400071BFA9D49ECE7C617C55F6A889D635BBF2
-:100A500029A508F9784EB9CCFC61FC1D107EE13C5B
-:100A60000FC4E161EF1D8EE270051703DC52486E82
-:100A7000A7093E9FC5B89F387F4142C47BF0C62D71
-:100A8000688F6E6D8238157AD344FC7AAB373D623D
-:100A90005E0FE37ECD09162C8983F1FB250D24FE24
-:100AA0009B11B48F0EA8A877CE24A25E63C3B89C16
-:100AB0006872572AAFAE237E70F27DB279124893E6
-:100AC0008CFA2F529E668E8BECCF72F7A8378890E7
-:100AD0007FBD5ED7E47E5EB34CFB72F30A2517EB55
-:100AE000453FE8FDECB1D17DE8856FD587E37AD34A
-:100AF0000B1F96FF5D7AE135082BC681FCFE345151
-:100B0000E8877EAC1FEA875279FB26E4972EB07700
-:100B1000E65EF845B3175A3C5E06F24AF27E91EF64
-:100B200067945E4D65BEFC503CDEAD2FC09F70F5F6
-:100B3000E2E73C9D984572D4AD5F34FD11E64F1855
-:100B4000C7FCE3FE4429F891A63C842F83E02B6385
-:100B50003C1F588685439897737E41F9966A88F3BF
-:100B600029DE67BF25B850CF49F12139D0FB195A8A
-:100B70005ED72AF2087ABEE8CEF3CD35521D8CC678
-:100B80001765762E1F657365CABBEBF9449B4FCF83
-:100B90001F015D5EE69AFC21E4EC87F24773A2D860
-:100BA000571DC4065D0F5F68FCA0F187DE8E1CD365
-:100BB000E567FAB2236FA21D19DDB71D797D989103
-:100BC000F4B5DE7E68F6E277495C2F6724F27D8E0D
-:100BD00069C3E7D9D0EFB026F13A0DCD0E75E7978E
-:100BE00036737E78BD638922A13D41BD9019867F11
-:100BF000916FD5F8AFEA5189F28D15422F7536F312
-:100C0000FC5B7589ECB7C0FF16373DB189F78D9451
-:100C10009F2B545A150B8C3BD325B930AFE316F9F3
-:100C2000BA196E89E7EB5C91FBF42D3AFACE117C90
-:100C3000349305EBD01FD7EBA53957B95FA0D74F39
-:100C400073C4BEFB1CDDBEFB554DDE07B001FF4C7F
-:100C50007FC09CF4FDFE80F6BE46478D7E2AEEC521
-:100C6000A11C1DFCC6A4C670FF19E937F5AA42E312
-:100C7000D893045F0A7FE6CB8B79BFA0984F3C5F87
-:100C8000DDF485C93BB26FF8AFE5B7C6A29F3E3A27
-:100C9000E4B76BF34E53184B47C74C674F6689EB6D
-:100CA0003FD47E0CD7AD43A383A6477BE059E8D958
-:100CB000BEE8742D3DABE9B37FB69ED5C6D7EC80B8
-:100CC00036AF5EFFF615B769FA74FD1603E54B26DD
-:100CD0008BF878B2C8C3CE4FE2F1C1AD493CEEEC1F
-:100CE000FACA62407BB9B385FB272EB3FD38FA05FB
-:100CF000A17C1FA7E7C331CC87FBEC4C69B7D0BE02
-:100D000067119012F73DD3F8BEE77625E0213DED5F
-:100D100052580DC8C9397C0FE679F8806F21EAE98D
-:100D2000873F1962A0FD7725D08EFEC9D83C85F695
-:100D30008F1C6695F2C19DCD663BBED7B5EFFFB463
-:100D40001A719CAF980B43B843CDE6EEFD1BD40758
-:100D5000A5729B8CF9FBAE20C8083C3F6941A018E6
-:100D6000E3A0C9ACBD16E57B02D2B117FAFD2A4952
-:100D70008BB37BCFEF1737733FAE3846263F6E8A73
-:100D8000AFBD18F7ADA62892AB169FD5E5F75FD19A
-:100D9000C51FA1FCBEAAF0FA435DFEBE91EB99EB24
-:100DA000CDEB4F40DD067CBC5EE373A16F581FF9AD
-:100DB000FD9D26BEEF133C6964E807B30B89BDE6D1
-:100DC00063AE95E7DFD712ED5663719F8EFBEBFBA9
-:100DD0005AD2DC6A6EDFCFE776048BD03CEEDC3E85
-:100DE0005BA1FA35911FEDB17FD2C7FE88BBD17EE2
-:100DF00008D5695FFB21C55FAA94F6B95EBC697529
-:100E00000B4CD43FDDC8B49F9BE474E7F96837F21C
-:100E1000F9CEF3696E84EB79C1A71ADFEF3B77391E
-:100E20009AF6414D6E15F78F830E8BEB59E25BCE30
-:100E3000EFF5A943FCB84FFB1B21173BA383C7B2B7
-:100E400013C3F73DF83E47CBBA47679F33D27EB90D
-:100E500084F9486D7FD9077243753DF18CE20F2309
-:100E6000AB67386FAD9BFD1ADB2993D438C4FBE523
-:100E7000446D1F538DA33CC4B757A8CE508FFFDDE0
-:100E8000EB9807EB511AD6593C0AC8FFABEBECD4F0
-:100E90006F5CE7A476FF3A95DA878EC73E8076BF0F
-:100EA000DA6DF22861FAE39D64EE77E5657F524CD6
-:100EB000C5DF7F6354873EE5C10E19F5C58D5761C7
-:100EC0001D117527CA65C437E537B342FD4C6971FA
-:100ED0000CF66FBC0AFDB0E7AF2439B83DAA53EA5F
-:100EE000462793B4105FFC2DC9DD9104D7EF7178CC
-:100EF0003EC176B734FFE02546FD73BC7FAB7C096D
-:100F00009ECB0F14525E391FF3CA7934EC42C4DF12
-:100F1000E85613ED976BF9DD3C4DFEBE8ECC33E702
-:100F20008BBCEEABAC83F2CD051608B40C0817A74A
-:100F30009F5B9AE794301F98647261BDC3E82C4FA1
-:100F40003EE6635B9318C547ADADC9196A0E720FD3
-:100F5000CFFBBAB5BC2FFBFEBCEF918F627DA4B76F
-:100F6000AE9A687FFAC8A9585780F60B2DE4FF693E
-:100F7000F5C82DD1BCCE80652CA03CD38DA29ED1CE
-:100F800062F69A93495F050E9E80F77E7F99F17D08
-:100F9000C7F60F695FBBD8303C05EB7E0F4A43E3D1
-:100FA000B07DEAA3D81C6A4FC55E44FCB418AC2AD5
-:100FB000CE7B669D5A82756D27D6B112AC637B6B72
-:100FC0009D85DA93EBECD49E5AE7A4F675B88EFCB7
-:100FD000731C9E477E71BF65A37D92296FD9146CE7
-:100FE000F316C650BBFBB61813C2DB12CBB66BF3BD
-:100FF00060BD5A203AD080C9FED6A7BC8F59FA816D
-:10100000DD337B474AA3186B7BCA3B5D990CE34EEB
-:10101000EDFF93AFE0FE9BC9CB1EB3005C734FD9CD
-:101020001ADAA0FF76F2F2C76CA86F8F4783D2C39B
-:10103000F5AE38EE1E047443A590C605978D837EE9
-:1010400082D65F31BD641263B71477643360ADEC50
-:10105000E495D32D80C75BACDE1F63DFE44B9A5E63
-:10106000D20FFBCC87F56041C948713FCB9012B1DC
-:10107000FE65A6C3FB467258FD9E5BFA13ED338DE9
-:10108000714BCC41871F8CB4EFC5EC1F2784CBDBA1
-:101090004C47E91B488F89C9BC0E78F424C91D5EF2
-:1010A0005FA17F6EF439B504E934E642591DB633C9
-:1010B000CB1DD4F72C185B87F25C62EBEBFD627AF8
-:1010C000BF3C99D78D142952445D89FEB97C6026B6
-:1010D000F48F8347A3294F30FAB4B716EB4F4B9DDB
-:1010E0009979B2A6FAA8EFD882FB6DA32BCE9424EF
-:1010F000A0FCD824179A8931ACA32E01EE17DAB1DF
-:10110000A00AD7F54431D6FF8C562517A2ADD0DD05
-:10111000DA80EF17BA625C85E88F9F564BD0F49C5B
-:1011200052469D2880E7A60E925D1618E854E0A668
-:101130008997A05F382C8EF2BC85CA9A2B27A81FEE
-:10114000E3AA51711D5B7E5D45E398C9AEEF9E51E8
-:10115000FC2FC83F459E38CA09023E4AC2EBCA600E
-:10116000DD0477A15DF64749C8DFFF5A6287FEEECE
-:10117000FE1296CBC37CC3FF42F78F44AB5100E80D
-:101180006E93BD04C7DB6D92EC0F51DF538CCFFB28
-:10119000861855CC1F952546458C3FB5441A7F0EC1
-:1011A000E1CF891B85D7CA331C11F7DB6EB3929D43
-:1011B000A8782B87FCA2B6DBD2C95E54BC35A9083F
-:1011C000DB3603F7D32BDEAA28A7FB061E07572C16
-:1011D000FC915BF429EEAD585849FD5629E52738B6
-:1011E000DF959CB83CCCAF4D1B945AA244F88103C8
-:1011F00049FEF3447EAFD0307CD32480FFDEA37C55
-:101200009FA2222733E2F91905524978FDA86752B7
-:1012100054447F7689A324BC0E756E456A44FF96BC
-:10122000B99911FD92A30564BF410F5494801E38F3
-:101230000AED5260C1025107A5E59F0A054B15B69C
-:101240008BBCACC2E3EB61F0877AB0C41669A777B8
-:1012500047733B5FCED6D00649F911BEBF5D966895
-:10126000FC24DC4E94CB15365E97158987BCA346CB
-:10127000B2977931921FE3FA92A34BEBD0F49667C1
-:1012800044BEAFF961E5023E6D5EE673B7A33FA2CF
-:10129000C1ADCDAFC15F2E2F2AA17CF735D6A18776
-:1012A00097C17A503FE8E1684A16FE1AF81FE4AF8A
-:1012B000897324F04BECCD7E6BFE7A05E82B47B8A2
-:1012C000BEB2498958B7D797BED2C6EDCB2FD3C689
-:1012D0009DE9F0D0FBEE1D9F9E9A2087F5333F4E8F
-:1012E000880FEFBFF8E9A688FB491FCF7184F7B7D5
-:1012F0007E3A07EF4F51D45A1BF0E53126B97CC82E
-:10130000076DAA1203F4283EEDAEC3B6F4432F9640
-:10131000ABB2A9E77C75D84EBCE86F33C3BA6E1A7E
-:1013200026AB18BF6B7E881EDEBF26F3BCC3B1ABF5
-:10133000AA15F75977FB542BFAF3BB1F54ADE88776
-:10134000EC76F37319EE2C039D8F7167F37AC5BFAA
-:1013500024F3BA834EF1BED6FA8DDE4E841BEBCC5D
-:10136000D137A8FA264875E5C7D0BFCAE9E95F1D9D
-:1013700053FC369CEFD8837E5BF87EE2F5FA577F0C
-:10138000041E43380A99E409D723C596284FB8DCD0
-:1013900096DA1D11FD93C20F99EA4C8D78EF263530
-:1013A00033E239F01B87A15F526B62546FEB33F06D
-:1013B0007A5B3D1E57A4F0F8CE65B3A33B83FB6672
-:1013C000726FE7915CC5865ECFB7A5A4707FF03FD2
-:1013D0005218C1352B85C3A7AFAFD5F76BF17C0F82
-:1013E000E293B99CC8E72EABE10AB8BCACE0E927B0
-:1013F000A6535D6DBEE1DE2CE8573CBD753AAFAB40
-:1014000035ECC13ADB194F3FCFEFDF60C837823F81
-:10141000B0CDF7C274AC2BAF8AE2F5095551A23EAC
-:10142000B46E7444DCA3183E7E6A21C69FFB8D0C0B
-:10143000F3FC8F99C00EE685F6D9AD661EAF5A4D06
-:10144000BC0E7C7DE6A9F5A83F3E8BF2E6A5509E3A
-:10145000B148453C5EB45BA83EF4BE7DA529C807F3
-:10146000B35278DE2B7BCF44279D2FFBE7C151FC85
-:101470007D7060FD308E73717736F9E5D903189D64
-:1014800027D1E801E1335D8F82F081CE6330B7135D
-:10149000F36FB50E138D332B85F3E3F5B63DEA8973
-:1014A000E30C6B7641BB2085C7CDB7E2BC046FB0BF
-:1014B000FF2CDCD0B307FBCF1EC9FB486F59CE0B06
-:1014C000A27F1BFC510CEDC3BC1FCDF1C63282B410
-:1014D0006FF3EEA26CD706BACEF1B8C03FB0B643F8
-:1014E000C5FA0F7F3FACB718E8F42E457CDC66F6F2
-:1014F0000F26BEB2AD89C179AEB7DEB8EFF921E0F3
-:10150000047B327F3CA797363FE0D882747C579C9F
-:101510003BD1E001387E8C70687075C3A3AB3FEFA0
-:10152000147E7B278E971BCA5357FFC940798A6A5E
-:1015300009F424F4F77CC85C3E95E8437950DCD28A
-:10154000C2F9C69F58526C83B6A071158F8FDB9578
-:1015500088BC9866CF268AE7C7BEA744D8A389224D
-:10156000FE1DAFCB4F4E6C9C4EE7F826EAE2E25FE1
-:10157000A488BC651A4B0BCF23AC15F1C6E5B68128
-:1015800071E89F2A10E7CA806F932AB371F121BDD9
-:10159000D0B08E459C53D4F870E469FB9D38DFC809
-:1015A000D3EC0EF207B471BBF3131C2F97DFE37873
-:1015B00019D531ECE949D0371E3132BF1A5AE70448
-:1015C0000E2A833087E2A4CB176C645FC61C9D4350
-:1015D000F5DE66A781A961EB8F52A3991AA62FADFC
-:1015E000C3E223FAB2A04F5D54A41F902FE6897185
-:1015F000A5458CB73FBEEC08FA05F9B6E5E417C47B
-:101600008D1B18311E6B5322FC833CE67163DCE8B2
-:1016100002FAE27ED998D34A841F302EB091CEA12F
-:101620008EFB30F2FA847391FD037DD1A52FFCB1BE
-:10163000DCA7D12FFCA1F873B823F197501E89BF06
-:10164000244F24FE521644E227D51B898FF4E5234C
-:1016500022EEF75B9317D11FF0C08488E733C18077
-:1016600085F7B31E9D16F1FCE08DB323FA4337DFF7
-:1016700016F1FC70FF9288FBD9DB56FE207A8FAC06
-:101680005F1BF1BC9EDE3734FE34627C8DDE3EF89B
-:10169000FBDFA437730AFF50D03B51D859879BD743
-:1016A000AD75196D8FE2797C3C3682FACE81E7E91F
-:1016B00063D1FEAB5497E79BC6685FFB97B2474286
-:1016C000BD940EA8356451BD3CD5F5FDDC6088D8CD
-:1016D00067B73BB93F6477723DFE6B133F2F950EA2
-:1016E000FE26D929030BC5D916AC77648299AC8F35
-:1016F000639C5DE7E818A63A306F07FDC921BDAAD3
-:10170000E9D1DBCC6A6D07E8975132D793A03FFB54
-:1017100039619EF7A5078DDCFFF019D1FF48B7307E
-:101720005F6C1ED919CA433B58A284E700E2427A93
-:101730005CFD0E88757065369DC37A134140BF59B4
-:1017400075D17ED3AD9A9E5A3E9CF4D4655BA4FFBE
-:10175000767969165D3F7BBB99EA07CE8A3A470DD9
-:101760000FFAF3D6DA396CEDFEF22D9B62D0EF3C26
-:101770002BCEFF6AD7270BFC4D76CAC2FE59D66026
-:101780003E6C1118F138C07BE5918ED8DB18F99BBF
-:101790009370DD555BAEDCFE2AF4AB0DC1646E3791
-:1017A0007CF4DEFC77F9B9EEF97F8BFCAE408593D3
-:1017B000C7F91562FC5BA0B1039E6E013A38B07D9B
-:1017C000635219F2275CA7F371338F3023CAF32CCD
-:1017D0006F26D54D9C62AE337B01C4F94E95E09CDB
-:1017E000CB3C46CC5BBD737B650C3ED73D9E360E35
-:1017F000300CFA25EF3A7CC664CC1B4CE6751330EE
-:101800009F05AF7B16A53F8C76499BEF1DE6BD7407
-:1018100006E83B9BB9685C6D7C86E9F9303DB57B99
-:10182000F9AA8F1260BEB5470D948F58DB6CA6786D
-:10183000AD6BE57FED780AEEDF91DED10FEDF6FBC3
-:101840002BFF3604F9E1D6CD325381DEAADD7BA72A
-:10185000336C5FE5ECD22B31781FECEED6A7D05875
-:10186000BE6CA63AE2F757BE3C24DC8FAD74162E50
-:10187000C7F7D8B8EB3BEF58FCD2F014AAF712FC2C
-:10188000B442F0D3DA178792BFB536A69B9F787F14
-:101890002BAF1BD1D67146F0E3CA97BE89F8CEC4F0
-:1018A0006EE023D5CCF7C5D4A160EFDB2EE7D2776D
-:1018B0001F8CDE7F75C2BC2D573F89C5FE9E37FF4A
-:1018C0004AF0B3B9D7072FCAA26F4C687F5A3BEFD3
-:1018D000B9A029211FE90E72B601C7BFED772F5EAF
-:1018E000FA00F1D3FCF2D69FE133D779FE739796D5
-:1018F0007714F6C625F001F686E28B2E16CDCF932F
-:1019000008FF46C11DF92CFA9E874A7CED66C77117
-:101910001FA7B6D5407526B1B8091496AF8B950DA3
-:101920009A51725B9CA0AF859EF97FCEDB2AEAA814
-:101930003E20D21F2A38B432C20FF2C05FAF7ED031
-:1019400033DE5ACC2FE9FDA1F101C36253DCF7F875
-:101950004587A6F5EA174140ED96C688AD21F835D2
-:10196000E8F4F37E2157F53816E6FF03D1FCFC338B
-:10197000980EF47B7F9ACAF5B72D83F1F36952E78D
-:10198000300BE8CB16E7A2C71F856B96417CDDD8EC
-:10199000AFA53335F9C47FDD7ED7A111A4B7D8B781
-:1019A000301BE243E43DF4742BC0F3ECF961722781
-:1019B000DE0F1CFE6B2CE67D77C4AB6F213D8247AA
-:1019C00065DAFF89523A4C8E5EE2BB57510F029F97
-:1019D000CAA9DC1E581A797ED1A2BA19C60F51764F
-:1019E000FBA8F0737F8D4E1E4F561E7EBFBF09E8C9
-:1019F00071C9D0169B03E3AFDEBB3B16DDFF0C9332
-:101A0000F703E4C35567DF1E63A7FCCD96FE180FEE
-:101A1000D607F87730462ACCA7E4F584A37A332C8E
-:101A20002601CFE927503BB2297F19F2597580AFC3
-:101A300013C7C642BEE18D12F53B1B6BE371BCEAD6
-:101A4000DF37A7A13CBD9CC4E3CD97AE66F3F71585
-:101A5000A6E0F341A74310D36FC0F8E46511D77433
-:101A60005E95E9396DFE918D85B21DF82127B0F1A3
-:101A700000C5514D6615E91AF51CE378688A22B94C
-:101A8000AF6E99CAD0EE7739984B82FB3BA2837F29
-:101A9000A4F36ECD6615F3AD51F68D2C1EC6DF2175
-:101AA000F659870347E17929EDBA365F54D3D31845
-:101AB00073203F50DE374AD9C826DBC2F11C437879
-:101AC00076A4723EDA111D30609E253898B1670900
-:101AD000AE109C8CE6D5E01CEEC7F3843B4CC1F302
-:101AE000786E06E0B223FD87330E276B1AAA629E3A
-:101AF00020CAEEA67544D955974FEA0957752EF3BB
-:101B0000A35DFFF943AC5B6E518EABA3437D0BC865
-:101B1000C08E814CC8F9CF1F2FC908EF83621917F7
-:101B20007A7FC8AF363E5E3789E2099F8CF12FB4C9
-:101B300031F1B84E95D6A7608A298FE301F7DBAD66
-:101B4000167EBFFB79E06F1BF66DFC39579CDD3AC2
-:101B50004D2239E1F5B8421FDC2705CEDF08A4FD90
-:101B60002A702057055856BFB19FF87495A1E9A96E
-:101B70009170FFEE28AF2B15E67BED43039D6BFDC7
-:101B8000F38B51FE0AC0C7B07D5B92DDBDC8877E76
-:101B9000FC47DE7BE8C974A4FF3E49C53C6C973125
-:101BA00048DF37A96AFACC44F50D8D1F53DDD39B6E
-:101BB000A9DE4938CFB8C61ADA8F1ECF36D27E7466
-:101BC000B6380F5EEFE4FAE3F2E921CFD684E17F85
-:101BD000492A972F16F40E40B96912F2D9827E0A6B
-:101BE000B47B85BFB4B7F5D62C352C7F58C30EA473
-:101BF00023BE1F6287A8D5AE77F9F9B9CAEC772C56
-:101C000077B8C3F86F9190F745A9224F96EA9D8D5A
-:101C1000F0AE6AFDC414ABE23999FAFE6857EAC126
-:101C20009FB2F782976EB9D5C951B51234E1F3D599
-:101C300017F8F957A0731D9E3778F99DC6118BE1EF
-:101C4000FA5EC035D695FACE9AA9BE72AFD1938E00
-:101C5000CFD79CF93A17F556090201F07CDDBC6A32
-:101C600000E20DF8BE281AE56B17233DA6C9670EE2
-:101C7000CA27BC9F837C5F80FDE1A4877798DAF94F
-:101C8000F9D3BDFCFC29F03DC901F0BD1DFD861C4A
-:101C90003BC801BD3F94E47B47BB81CEC9FA408F6E
-:101CA0000FA67ED11CECEF682FB1937C635E3F0FD3
-:101CB000E5347080C6A987D8044927314FB83FD989
-:101CC000E88C25BA69FAF1B093093BA1C6E1790322
-:101CD000AB2C47C845983DE47D612F4FFC2AF0F8B6
-:101CE0002FD176B8855D10FE14F3E6939EBF57D8CA
-:101CF000AAB5AF4F98B91DD6B9F684DC5D3F8EFE0C
-:101D00006B40F0C901E1CFA29D5013783D0E5E1FDC
-:101D1000BD99D7D58E71AF29C6B3CFE3CA371EC4DC
-:101D20007682A7BE18CF3E4F5AD07E909F81E6E7BD
-:101D3000D91B0EDC948DFBDE5D67CD0CF75D1AFEC2
-:101D40001AFCE34B8087FB5B00FFBDD825580EF1E2
-:101D50001F58EC74E6EC79BF4BD2F4C7A90AE4C76C
-:101D6000CE0639D40740AA80C1B1FFDBD4938FFBE4
-:101D7000A09F95E67E3E15FDED742FB55D27FF9A79
-:101D80008CB660EF69EE473598DCD9C83F0D032368
-:101D9000BF1FA0B54FA61A890E057D7CBFEB482A50
-:101DA000CF6F0EF1B1C7908FAA1A64BB1FE87EA94E
-:101DB00041769BC01F3AEFF626E3D99C0BCC77CB3C
-:101DC00044B4F3228ED4BEF77217FA2960A7EEFE50
-:101DD00065EFFB0FAB99F65B6340BE5AD624B1FFAB
-:101DE000001C2C7F26F2F9D5DAF76A1AB71CC6EF69
-:101DF00088AD7C4E771FFD15FA0E46A41F7324553F
-:101E0000F827592C0BFD13E023D20F46851D310313
-:101E1000DFAE48F7EE437BFCB2F8BE02E85192C752
-:101E20007D4E615744FD417007AF2B1EBECD2F1B69
-:101E3000E0FD098A5F467BC5A0C57D87716E6F197D
-:101E40007D87C9E73E8DFB3ECB853E5CAEF9697E62
-:101E5000BE3F026637C24FAB16AB1FCFFCB5B1B861
-:101E6000FE6D12C5CBABB645EEA7548BF5AFDE7C4D
-:101E7000F2309ABCCA7ADD7DB1FE6ADDFAB57DF337
-:101E8000CF5323EBBFAE773FE42F46EE37BC2DC6D2
-:101E9000D1EE9BD2B87EAC826520DD56FB65BF9F3C
-:101EA000FB7936FC5ED09D625D770AFAD33AE1B9E0
-:101EB000CA6D923F803CFE78649DE95DF58BCB90C6
-:101EC000AE7A3E5929D6BD7CBB91FC55FCFE0FCAAB
-:101ED0009D9E3F568AF5AFD4ADBFCA2BE9E0E37EA5
-:101EE000744FF8EA6F413A576E37B2DEE0D3E8B587
-:101EF00052E3EB3EE0D5E0D4E0FEA1F0F64F13F95B
-:101F0000AD116C04D1A93CE1BAE8A4F773771D1EAA
-:101F100041DF5BBB7C6420C5FB1A1FE8DF2F137E0B
-:101F2000F2D4CDDC6FBCD4586C1D89F14C9BC1251B
-:101F3000A9149FC58E04BCE437CBAC02FA5D4D59A1
-:101F40009BF0FB8379270AE660FC9F7FC240E7EFA6
-:101F5000F61C29A07DE7FCA38312B228CFEDA2EFE7
-:101F6000E3C038645FBBDAF236E1F984AEB69202C0
-:101F70001C5782E7D00FC81376A2A62DCF1A7EFE7B
-:101F80007C4C1A8FEFD73B3FFD39FAE9537719E9BB
-:101F90009CC55463F04DACDBDA7344A17DF2D527C8
-:101FA000963C1485F47D51A27DF2C3ED6B1317228C
-:101FB0009F3519EDB8EFDDD5F4E30378DFB75DA207
-:101FC000EF5E54379766EF807EDE967C57F8F9B364
-:101FD0003C874AF0B1542BC5CF53FB19C96E5E4CF8
-:101FE000B3FE16FD9F95EE2D24DF17F7EF3151DD7F
-:101FF000DE0E89A1293BEC3CF80AE2E3E2AB274D77
-:10200000E88417379C34757C8F3F70C92FB300C5A7
-:10201000CD1B4D18C7546ED1FA1D26A49347F8471F
-:1020200055CF7D4CFD95E8CFC37C2B9F91A97EF7C2
-:1020300060F36B26E4E7AAED124BC90CBBBF598ACB
-:10204000F85EC312C6F96089D03FAB987F7D1A3C19
-:10205000B76A23AF5B608F46D6016BFCBD42F0F7D9
-:10206000AAEDB3E8FB533DBE5B8871E30DF81CE7B6
-:10207000EF659B23EFAF107CBD42C7D73F4913FAF2
-:1020800067381B8E7CFD75A11A9703D7BF3EB972C6
-:10209000406FE7ECDB84BDD6ECE5E58081EC8DFE9E
-:1020A000B9CEC62B046775DB6513FAA7654D5F10C3
-:1020B000FE2B9A5AA97EE466E65D8DF8BAB9C96A24
-:1020C00047B9AEE8E07A685A93D9EF97F07E3DD5EC
-:1020D0003977B5F0BA49DF7E89FC1C4D8F69DF770F
-:1020E0005C26F0B80C14787A1EFABB3C6EAE127106
-:1020F000F28A615B0EE33E7B95B8BFFAE8C158F403
-:102100000FA7B12F6E47FAC07C0CE763CF44E27D86
-:10211000BAD08BD3B773BDA8B76B5DA9D933298F5C
-:1021200009712AC2B57A7B24BEAB74F1F963693CAC
-:102130003FF6820EDF154166CD413854D9E5A7A799
-:10214000DB159CF7482ED85BB4936AD6F77E87F1EF
-:102150004DE1676BFD99E21C78BD7DA32D3C6E8E31
-:102160004AE7FEC2CAF1B20FE9D51D6F0C3A98AB2F
-:102170001A42F106C419CD69493CEEC08292373249
-:10218000649698188A371E716EAAC8837EF5762EDB
-:10219000F79DE3603C3C7FAD30F247ABB79BE99CD9
-:1021A0006235D09FE28A267E9EC2D3249522DDC16D
-:1021B0005F3F9A86FBB198528575CF6AE47C3FAB4E
-:1021C000E40BE297A383F87A2F2B6A4A6FFEBBE6F3
-:1021D000B7E3F93035CC7FAF0239C5E7AB9A783D2C
-:1021E00052C3816FFA67A29E6BFEAFFE8BA1FD5AB0
-:1021F000D845CD2F0C825F3890FB45F4BDC9BB8517
-:102200007C2DB3F37DBABB85FD61521DF17995B18B
-:10221000FE503CFA593B78BD00DB871F8503FDF873
-:10222000F64B75F1B0EECE9724AA87C3F7F17B94F5
-:102230009D4BEA3F41BFFBEB1D16F237EF06BF6532
-:102240004A5E4FB9D4E45BFB6E560D7B88FCCF87AA
-:10225000581DB595829F3B1B6BE9FBA09ABF42EFCF
-:102260000FECE98F540ABEAFD4F15F547A24DFD566
-:10227000BC1D4D7E63D751D98EFB3180AFDFA48565
-:10228000E345F8210D07A288AE5D276D6447FE2C5B
-:10229000F8EDA2C83FD78C93090F86F1BCCD6E79BB
-:1022A0006D20D211F18EF5F72FB7BC36829FFBF669
-:1022B00013FE576D9323BE0F5B591FF9FDD79AB7D5
-:1022C0006FA3EF0855EFEF866B88293104575F72D3
-:1022D00020493C8E3448917164F53ED9135E7706EF
-:1022E000EBB903F551BA9007A6049331FF35009D71
-:1022F0000680AFA689D3D5D0CC5B98FF169E273138
-:10230000D2FC3DEE17F956E3FDAF33AD7CFFFAAAE0
-:10231000AF02FBF70F94A9AEF3FEB7570E0DD7A38C
-:102320000CE104BA561B83C9146F9E34107CD52768
-:102330002F270FB2A15EDA5282DF0F9D2EF4DFE16C
-:1023400081D6E5C8CF3E9C372534CECB69BC7E8F85
-:10235000E17A9DE86DFC928F2BD6FB109B2DE26AF3
-:10236000CE4F39697CBD108F8C4BEF251EB95EBFF7
-:1023700013ECC3A98512D633293E8C87F7BCC7F569
-:10238000424DF3B28F90DFABDF37539DD7FD2DCB9E
-:102390008652BDAFD77B03FA1B5FB7ACB881F2831F
-:1023A000D24304970FE173A25F732619EB522B9B64
-:1023B000CF2493DDDD3B7A932F06FD97BCE9781D92
-:1023C000FC09E23FF06B88FFF6B415687E8C15C7F8
-:1023D000AD3CAA78103F95470B8E57A07F71A2A8FD
-:1023E00000D5B974A280FC987CF4636C21BFA65B15
-:1023F0004FA6733FA6AB358AF20B121BC8F9870DA7
-:102400008AE09FD50DAF93BD5FDD2847D42F6AEFDB
-:10241000DD99AED038CB34FEA997DCC41FBB78BBA6
-:10242000BA710FAD6F95B19EE85DB3DDC8EFEFE017
-:10243000ADF67D581F8BF7213E8EE325A0C3349364
-:102440003F03F3D3C732B99FAFA7C7E7E93CFF719A
-:10245000ECAC7700F2CBB142EF507B2F76C2C78A4B
-:10246000785C2B097C37F07353FAE73E4B97C477BF
-:102470004222CFB76AEDA974AE3FA7997AFF2EE04A
-:102480006FD2B57309EC31430146C546FB06E1D76F
-:10249000A7867DD761CECD46F2174E31FBEB58EFC4
-:1024A0003843D3B3E3B87DD5E7CBE789F73C9B55F9
-:1024B000BE5FA43B3F334F3BDFA43BEF364FF83BBF
-:1024C000F374FECED3E9C28F1FC286A01EAC17E7FD
-:1024D000EFD60E8FF287E7B3F4ED61B12F82E78775
-:1024E000B0AD19FE2EE57D8EB59E7D85EADDCE462A
-:1024F000B1813CAF47F9EFCA3EF2DF35DD723937C3
-:1025000082CF34BA5C12DF83D1D365B7A6AFC4BE25
-:102510005DB4D8B7F31BBDBB519E2B2D174DBCEE40
-:102520003068427D56339CFB4D974A25DA6F073859
-:10253000FB9BC3F4FBA5541E7FDD7F8B4479D756EC
-:102540007C1EE3AC7A89EABC2B03ED26E4A7210DBF
-:102550008B1F26B9F5B1D32CECBB1A332DDC4E768C
-:10256000D34F5B77B71D8BF7717D9C482D3E8F76DF
-:102570007186B083FA735143597B593AC033DF2DCA
-:10258000B9B01EA02F3ACF5E30EA7544C3F5D2BB76
-:1025900033DDFB4E3ACA79FBE55B308F7A6CF86726
-:1025A000FDD18E56F5C1C71F0B3CEBBF2BE31AAA1A
-:1025B000D6E2F7556A9DDE0ED29F866F6347301CC8
-:1025C000A7E3376B25A41323FEEF4B7E3E13E37E78
-:1025D00096CEBF770FB8A77D9755E9BC4EEB98D143
-:1025E0009F41798A9CEBDBF7AAD9F7462EEAB3CE56
-:1025F000D6A3B9A630BA5E5C0B7A00ED4AF3C1648B
-:10260000D516CE7706E23749D2F84F11F632920F3F
-:102610002F221FE6607B267610EAE35DA76207E3C0
-:10262000787B79DBCDAF4DFC7BF6101F0D9917132E
-:102630000EDFC304DFA57A3E0E631D43E68C0CBF9C
-:102640005FDB171F5B33888F3B22F8585B6F3D7E43
-:10265000CF07E38016337DCF07F3D78E3039199A31
-:10266000C1F5CF58F1FD9EF1CC47DF391C2BBEE3FD
-:10267000335E6101251EF7CD0232DFF7E5E72DC697
-:10268000087E1EAB045AB18E62BCD8E799C0DAE965
-:10269000B9292C48AD9BD9E91C451173513BCE1289
-:1026A000988EEE544E7D3DD525069215C7798B3810
-:1026B000AFD10BDD42EB57E8BB3DC49F329ED7E95B
-:1026C000FDBB2FB333B8DCD3C74590BE9718E5B92F
-:1026D000F07B6D38C9448595637DD3648559A2012B
-:1026E000DE5D870C24CF2D1DAA1FEB535D09E2BDD3
-:1026F000CF19D5E18E757379459383F518DA7AF59C
-:10270000789800E3619E6DAC029128E13140F3DDE1
-:10271000C8F8399242A652FD736946A6D0F7418A9D
-:10272000A38A218E427D6FB0F8081FD33354BA8F2D
-:10273000FB25B130CE848D127B0FF73FB2F87AB50E
-:10274000F1270023E0F9C2E919DC9E614AF5BD7862
-:10275000BE8F124B05CD2576FE9DA364FACED1F532
-:10276000E2B52B997FEF32F6CE60E7CF0A42FB4904
-:102770002EFCEE516CE83B9B2EEDDF830844FE7B84
-:102780001077642CF911F2A356AFC7BCFCDF7DD0E3
-:10279000D7EB85D5E7B10B61E7B0B5BA926DFED93D
-:1027A0002A9EF35B9068A173BF7996FEF968C7060D
-:1027B0003ABD34FEFBD2F6C13498E21FED8909F12F
-:1027C000BB95B9C721BE437583FC3B50DDE7AE9294
-:1027D000199D57B49A797DE563201FF81D26902E28
-:1027E00015EB68D883C5548FB9DE6171E17909337F
-:1027F000C26D0DC15D6B11DF05B5F07D717D3D686A
-:10280000ADCD40DF1DAD65D1740E3D29DABB2E0381
-:10281000E0BA2FA688CE7767EF9CE444BF317CFDF9
-:1028200093B4F51B7AD647C27A1FC9E8A51E515B3F
-:10283000A7F6EF76D805FEB475DBB5734A6E25E2D0
-:102840009C92868FC7A2F9BA8DB8F39F45EFAAA8CC
-:1028500037F4EBFDFFDC29BC16A06400000000008B
-:1028600000000000000000001F8B080000000000B6
-:10287000000BB3D36660F8518FC0C19A0C0C5DD2C7
-:10288000A862B4C41D120C0C9780F80B106702EDFF
-:10289000F5926460F006E26D40BC1D88C5A518186D
-:1028A0000280381088FB80FC7E204E07E224A81BA3
-:1028B000B30519187281381F880B815848808141EF
-:1028C000588078FB8B1519185EAB22F85A6A0C0CED
-:1028D000C91AF4F3FF60C381B6F4B5EF16D0BEE5B4
-:1028E0006E08BE0490BDC20D55CD4A37FC66AC42A1
-:1028F000935F8DC65F83477F810D2A7FAB292A7F37
-:10290000AF3903C3072435DB4CF1BB051D2B00FD9C
-:10291000A788274C9730A2F22732A1F2F9A17C00B8
-:10292000BE1E313CA80300000000000000000000B3
-:102930001F8B080000000000000BED7D0D7854D5C2
-:1029400099F0B93F7367269999DC24433260126E7F
-:102950007ED0A001879860B0586E20E147A30E0892
-:102960002CB440262888166DC49FC6DD500609BFCA
-:102970000921E14F70D11D105DEA63FBC5565B75FF
-:10298000BB7682D646AB3568D787767765A015BF0C
-:10299000BA761BD96D976EBBF57BDFF79CCBCCBDB0
-:1029A0009900FEECB7BBDFF3C5C7E770EE3D3FEF24
-:1029B00079CFFB7FDE73C725BB59701A631FE31FF6
-:1029C0009413731963B5A9B2C5C362D9398CE5767E
-:1029D000488CD530B6B25D89CF827F1676B4BC8282
-:1029E000F5E56D6EC35DCA58FF036E7F0DD44F6F62
-:1029F00057C26EE8DAA8F8A8BEACCB15761BF07CFF
-:102A0000EB472FE7E3FB8D5298419DB1BB199BCC5F
-:102A1000D81A0FFC13EACB2A921DF8FEDD2D52388E
-:102A200086AF99E99B04EF6F65FC7DF3038AC6646A
-:102A3000A8EFBBAD894D64EC961E98C5430DD9C770
-:102A4000BC3D63058C45F823D6B205DE57A6DE47AC
-:102A500058D7470AF46B8E399EEF9BF53E0BE07B0F
-:102A60002DF51CD6730CFF3185B14B993F783A1B7D
-:102A7000FE1D66E18F15281BF2191B9DC297B364DA
-:102A80000CA01FC5D85CC65CAC1CC6A9BDCCC5CA11
-:102A9000607D161EDB381E97354984C7653E46F5B6
-:102AA00077E74AF1074BA91F9B5E0D253C2FC88392
-:102AB00032C8CC4228231E96C806F8E7B65DF61E3B
-:102AC000AE7F034E359ADA2702F07E018BBA18C02A
-:102AD000F7672C46E56216A7F2CB2C41702C6543B4
-:102AE000252AD4EF52129B18CC130E45A7E3FEFE05
-:102AF000AEFED8BB12BCBFBF5AAA9D0225F3E5D1DA
-:102B0000BA2FB43E6B7E9545AEC37118935D113FED
-:102B100063E3AD751E66B18A20637A8F8FD3CB6174
-:102B2000D6CFA03EBE41D04BE3FB7208D6DDF33CCE
-:102B30000B633D049B3905EAA1AEACF806A8F73C4F
-:102B40001EAB47BC1C6B01CC43FF638D6E295A053D
-:102B5000A54B7745A00CA98C2980A7FA86F592028F
-:102B6000EDE646F938E34D4D665742FD704C52C5CF
-:102B700073ECAFEB314987FA78A83F28E17BDDC5DC
-:102B8000609C86865C57B20AF1DD334687B2E2B0BC
-:102B9000969001BFF5A64ECF195B4474355ED0DA2E
-:102BA0005C93F79B7B38CFCFE83DFBD3C7D67BC088
-:102BB000EF25457CDF8E1D2ECB417859D4DEBF48F2
-:102BC00065314F5E0ACF3BD7C10B770ABFBB0E976B
-:102BD0006D45BC1DEB53C382946DE3C3B8BD0DF0CE
-:102BE000FE4C951C560CE4B3220E7F85EED77DA9D2
-:102BF0007176AE83F697A5E06854A6F6133E4C4670
-:102C0000FC38B706DA57A5DA3F81ED018E3D080F93
-:102C1000F55B73D48BF34418CD33123DBCB04EA793
-:102C20007E83621DD7FCEF30EDD3DC861689CF2B77
-:102C3000E06BB0C36795167C238D7F4CC0658D6FAC
-:102C4000CDF7C4BA10958D4AD523F7E2BA8E687CC9
-:102C50005DF38DC77723FE8E78C231A83F79DDDF23
-:102C60008CB91786B862FAF3973FC370BEE50FDFE1
-:102C70008EEB7A2E8BD6F5D487675EBB910D9FF7CE
-:102C80002D81879F9E9B3F44756BFEB9A6344602FB
-:102C90003AAB34A5840BE8E558FD571EBED7C07A81
-:102CA000BF89F2A4D23C664A504E846168BF99FA4B
-:102CB000A78F419E554277E4C7490D520BB67BE280
-:102CC000C687BE741F3CFAA98BC37DC55F72B82F3F
-:102CD000BB7EED9308EF6537AEFDF93350BF02853B
-:102CE00020F0DDA537ED5FF377F0CF6F2CFCCBE55F
-:102CF0007B18C9855836C0916B4A0CF777D9F7DD38
-:102D000036B972EC793FC99542B33486FCB7AC4F03
-:102D100022F9DCDF08721FDFFFCC1D77237F3D2007
-:102D200099D4FE59771CE5C3311763288F971DF797
-:102D3000C6915FD8AA6524AF2396BC36F397DE0B05
-:102D4000E3BDDB60C9734EA7F41ED6F7AEF98BED79
-:102D50005743FF33A62B8C62D392174E3CBF2BF008
-:102D60001BA92F273A58A6265DE10CF4D0DCA6D883
-:102D7000E4767DC349A2AB6550B2343E9D2BF86C1E
-:102D800059C32F047FEA24979CF0BC515B589C895F
-:102D9000EE4E09789282DEDEC5FDBE0CE1835E4810
-:102DA000375D4A5C4993D3F0E78A4CA07A0C59FA14
-:102DB000962D76382DB9DD12CBB6E92B90BFFF8268
-:102DC00072B3B92DDFF67C6E0EAB9DFAE9E4F01F0D
-:102DD000480E27258207F42FED7F242EC5512E5A49
-:102DE000FB7387D89F4805A3F5FCEA80148FC1FECA
-:102DF000FEEA8858DF3E29AE4844AFE6690F8E0BE5
-:102E00007396A7F6FF76B1FFA9FDE3F8B1F095D26E
-:102E100073B99B9200428B2F5282F2DAE21F0BBFF2
-:102E2000FD7B7E5482FB57D856DA5D87701E508832
-:102E30007F3FAC3F598CFBF6AE0BF00AFD23871F9A
-:102E40000B305F0AFE1621073FE8007A81E712C2C5
-:102E5000599906A780DB857568777B83D4877CFAD0
-:102E60004B31AFD5EF475B66CC44FCDCD12331C49A
-:102E7000CFED477A97FD39AC7F753C3B8C53FCAA6C
-:102E8000B1387009C0B3A2C7BE9FA7B6DC1C40BA58
-:102E9000F9B02FBF00C7B97D6A42433857275ED5C6
-:102EA0000CA0B35966AF96CC40571FF66D0860FB77
-:102EB0000FD59E1BAFC179F629E1F530FEEA23A5B7
-:102EC000334D4EA744BFAB057E4FAA3D33C7007CB0
-:102ED0002DDF282779F05E9F323B9E417E7E5D523A
-:102EE000880E56B7B9655CE748F4F261878B2570A8
-:102EF0001E3541F81CA9DD077D2DF4BEFF81C21BE4
-:102F0000D07EBBBDDD45F2E2F63637D1D3EA0629E5
-:102F1000CEA414BFAD10F0AEDEADD0FB93A644F24C
-:102F2000C3DAAFDB05BD9D3C7CD52BA8EFCF80FC81
-:102F300041B93B63E30FB54B000F2BB67079747248
-:102F400077EED27B508E087D798718F7B6B862E3AA
-:102F50008F95EDD9B6FD8876E5DBEAA78FE4DF58DB
-:102F60008774DDA590FEBC65E3635A88E493DDDEDB
-:102F7000440E9B5490B22F4FB0A105D748297AB286
-:102F8000E8E7D636B03703C3EDCD962312D9A317A1
-:102F90006D67B6819D3971B89D69C99108DA67E599
-:102FA000293962C98DBB94E8D820C0F16B57F4B2BF
-:102FB000FC72921B0F48B54827FA6FD1AE6431A559
-:102FC00016E5DBC5CA0B5AACC547F0F75E07D0550E
-:102FD000067A9D817405F3CCECE9CF48CF33248386
-:102FE000C64BD1CD2D01E25B1C14E068F6985D085C
-:102FF000E72530B1B79A4AA6E4F15285FA668419FA
-:10300000E8E1D45A297EA894B7F3A13C05B8AE8173
-:10301000E7CD5D97C7B7496817C21FEACF366E770D
-:10302000433BD39F47CF4D09CAA2F6D297717F2E5B
-:103030000101A055F3F6380FD8598412689F7057D4
-:1030400053D75800CA62E827F3FEF41EDB05488E0A
-:10305000C769BD383E8E53A1C4D7A09CB1E878990A
-:10306000903B20572B55A0AF66961546BDD9DC5630
-:103070007E5EFBE586B05D7EDC5467D703734DBB97
-:10308000FCBF79F625B6F60B22E5B6F77FB6E80A5F
-:10309000DBFBC5D1AB6CF52FAFFA82ADFDD2D619F3
-:1030A000763FE9A7B9B49E35822F4782FB75212F61
-:1030B0007FE2B04FADB2E9FA44CDDBB04F6C9D3B3F
-:1030C000FC381427E6B0457D6972C5274B84CFDFF5
-:1030D000009B70FFE04F1F131E437CDEA6BF70B73E
-:1030E00066A23B4DF4437309ED2567FB138B619E8C
-:1030F000B47EFF26494487E7FA314FCF2F01E4160B
-:10310000E0E41C40FD9D2C5982FBE6CE35E8FD5DD8
-:1031100072B200EBBF61437BF3717F7DC962E49FB4
-:1031200066953D27E560BFB0C70DF38135C4DA80F1
-:103130003E5ADA7E741CED38C908B22558F7F812E9
-:10314000C8DFACC3F561D2C23BF0616F28FAA104BD
-:103150007048EDFDBF97F0FDF799817A98258B7245
-:10316000D17FC4A9D2F9B069066B457C9D68B4E3F0
-:10317000CD2BD6F17349A676CF31F3B7C8472725B3
-:103180009DAF4FC0BB4D32CFE27C16DCEFE6EA1AB2
-:10319000FB74702B722DC2FD23827B432B4B662B5D
-:1031A00023C37D0533DDF2A8E1F09C656656A6E7F2
-:1031B000B3805D333DBFDCCD2AD15E3D216585D72F
-:1031C000976239F48F5F03BE8A7DC3177EDC184E89
-:1031D0001753E55C9ABF59D8BB85ED52221BED53BE
-:1031E000E621FB95F53C647A50AE0911D7D2269DB5
-:1031F000C4F5B38E4633E949AD9719124B6F776E1C
-:10320000DFDBDCD4DE923796DCB2F069C9154B7E89
-:103210005978758E3F929CC1F1D43C843F3A494E17
-:10322000A7131DF03101E131AB71FFAC7D033732E3
-:10323000E6A91E79DF2C3905ED18FAFF23ED17E01A
-:1032400089EC3A5798119EDE0D0E2D7D0AD63DD0A1
-:10325000C6F5F5BB458CECC3336D570DE4207E3CC1
-:103260009E0AC44F219F8A150687D6A17CF5A9899D
-:103270007E84AB50E82F2FE3FAAB90193BAE46FFAC
-:10328000BEFDE4126C67ED4FAED89F66D81FF447C1
-:103290009A7D43C56827B951AF413B37C85D94CB90
-:1032A00085EDEFFF07EAC542875E4448583A1C594E
-:1032B000553BAE36D2C7FF6823DA97D6B8D4217D06
-:1032C000FF83DA49C46F61FBE6BB95806D7CE963DF
-:1032D000C48390DB68769D9BA714ED5539E10EA45D
-:1032E000E8C20997D56F243A61E9F394DBEA644FA9
-:1032F00038EBEEB06693CFEFFEB13CA7D5771E7AE0
-:10330000738EE7A46F271F083C7C0A3ADDC4E9945A
-:10331000CB058B6FFFB3E8346AED6B2CF78E23A8D7
-:103320005FBBB4F02C03ED84A11F723BC16D1C4246
-:103330003A8B495995F03EDAA192DD68D915FD6BBB
-:10334000FF7A4B193C3F512B931F71623DA7FB3D08
-:103350000F707BD4D2DB51A1B7D12E40BC82DD30BF
-:10336000E0E6A507C7F1AFBFB95402B83DC650BFEC
-:103370001BDBB71964AFE6D4C5F54628E315873CD7
-:10338000E38C945C4AC6F2F396C37E7D2BD7581625
-:1033900021FB3A3A7AAE3FF5FEC732D74FD34A58AF
-:1033A000DE6C182FB9550E3F08FD932EBB1EB3CA15
-:1033B000350AD797492F2B413F78A476438AA557E2
-:1033C000758DF665FEC071DCA791F6017640A738D1
-:1033D000E6393AE478877968FCA4DFAE874E0A3D87
-:1033E00064C1FF09F4EAC262A08FBD5266B83F1201
-:1033F000E3459F030060BFA32A3333B573AEFB1FC1
-:1034000044BF84ACD27C3B2A76CEC6FD8EC5947078
-:10341000FA7E58E55F285C7FE6CC6DC86D84766CDB
-:103420007DE67679A2DD63F7652D42FF0A50A7623B
-:10343000BC2614D3E7CDC678E4D4BC49E863FF18B2
-:10344000F50FCCBB3B72466FF17D227C14849491C6
-:10345000F1F1A62CF37D74F0ED1E70D7507E262579
-:103460000FC55F5A62EE8C7C6CC929A73C72EA39A1
-:10347000C934595BF570B9628DFB49F519C8872CC1
-:103480006554CA6E3FA7CF2E961E47900325328BF8
-:10349000F665F04FAF56389EFA633C4EA19A32E97A
-:1034A000AD994A1393004F1B828CE4411EEE35F216
-:1034B0006D038B030A583E0B0FF8509E046596204F
-:1034C000BFD5E9079A4DE8070639684C1F55D65F06
-:1034D00008CF83F357D239038B7079ABC37F9C8FAE
-:1034E0004CD2176E81D7686C12C539F39AEC72DC36
-:1034F0008D7E20C847BDC1F17CFE4C3A6F70B3B4DD
-:10350000E7B08EAB147FF03498F6AC9AD5207F5696
-:10351000EFBF6AD76218BFE6919BDFC672F2C17B2C
-:10352000F2BF0465DDE3BB6EC6B2E4B5E8D84CF18A
-:1035300054AB044E61721DC0E763863B67E476C6F8
-:103540007A25827635EC6307D24332569E85F4BDE8
-:103550004AE1FCDFBF400B607C46DDC2E5AA3A1FB2
-:103560009047F4CFFDF4E6943F4D7E852AFC24A5D8
-:103570005DA13842522FA378CBA12DB28625C8D9A0
-:1035800018CE63CDDF2BE2D49D22DEEA84AFB76490
-:10359000A818E5E089F51F917DA8E859E1D9305FC9
-:1035A000979F95101C225ED02CF62FB9B6DE931E85
-:1035B0002F52849FD37174CE80817430A084BD0655
-:1035C000F18D86E346B74C67187F99A58719DA1302
-:1035D0009DC2EF517C26C37DCDD6D94CF46BE195CD
-:1035E00016C2FE552C9CC0FEEDFD885B58AF793BA2
-:1035F000F2C10FAEE576C88952BBDC0612EA823D05
-:1036000065B38AD6AB489B4DC1495721CDFF5E2992
-:10361000107295D3EB1BB5531EDB0674F09CDBBC1C
-:103620004719F509F8C821D77F006C82FBF6A8641A
-:1036300097E75679D0C9476D12D985AAC9D73953AA
-:10364000F9B011F5E446B01B0B8DE1FCB2F1754603
-:1036500076E346E0BF586926FEA99650465C2CFFEB
-:10366000E4B5E74A18C7F8ACFCF3978A38A713FC0F
-:10367000037496403BE651C9E89C02EBFBCEBEC604
-:103680001F4F81D7CF1E58917D0D94DF8B6FBCFEED
-:103690001A98FFF6C7F764E33E3FFA2AF0D379FCA5
-:1036A000788B9F9AD1863D4F9CCD586BE727637DE1
-:1036B00005F1D35B0AD75FFD0B7EF7C6D5FF9F9F51
-:1036C000CEC74F6F2B409FD3FE74B6387A1EF9D603
-:1036D0005CC434B4B7A08D89741E0DDA4B9F9A4533
-:1036E000F85EE7E272CCEFF272BB23C4DF3BC7FBAC
-:1036F0001BF593C70F16947F763E5DE7333FFA3C88
-:10370000F81DE40EC99B13E3EC7CDFE9E274F72BB0
-:10371000D7275EDF3B5FF81CD607763DD977D7A960
-:10372000CC403F60E20B1E1216AF8EDB780459626C
-:103730001A3C0FE5F1F7EE3C929771B46386944A18
-:10374000EA6F326EC737D56C3EC2CF25062B168185
-:10375000BF3C07FE85F6C8753EEE57C0382C04E323
-:10376000AFF6468BD551341EF997AF3EBF2F88F286
-:10377000E5758F5982CF5952CDC5F301CBEE18991B
-:10378000DF55763ACDCF7A5A6304C7A94B358A57AD
-:10379000A2180B407D6BE9A514A764E1D87109EB71
-:1037A000A37486725C094616931DD2E63666417D87
-:1037B0002B1850B120D12DC94DA5BD37144039006B
-:1037C0007609BE5763733D1AFA2FA3640C42337710
-:1037D000DB47E4779F28E6F2B6630AA3739A810772
-:1037E000FE6DA98CF64EBB9BCE2DC06E247E8D0A3D
-:1037F000B9910C4E0FB5A09F51A48525A86F8AFDE5
-:10380000E2F8D7B83C313D93D3E3233CDED112E25A
-:10381000FEAED3EEDBFCF5CBDE3470BC1FBED6753E
-:103820003994AF3FF9F3D72F87776F7CEBB51A8CBC
-:103830007BBBEB345BDCD1CD8C37D1DE029F29A181
-:10384000A17C8E9D5C829B99F2EBA418E2275AE33F
-:103850008FE37A91B7113FC9290A3F5F84BF10C037
-:103860001710F075074F55D13CB1F7FF2393BCA754
-:10387000BFC9428F40BBCD79F7C7518EA4E69B44A8
-:10388000F2290AF209FDC8A8AF67C91A9ACF1F7EAC
-:1038900010FBFC11767572EABCF0D096792D88E7A2
-:1038A000B90B3C3AD2993BB6F96EA473E73ACFF81C
-:1038B0001EBC144373B6F9814FDC159AE925FB97BA
-:1038C0001DA6FD104D2CB8755020187780FECB56E4
-:1038D000B00CFD0DE88FEB047986F6B6D50FC8D88D
-:1038E000C4F59EF14DBF94E2FD225E61F5BB292631
-:1038F000D139C14DE5C006E5C3F1B4C127FFE46B82
-:1039000078EE12537485D341A8220D6FF8678F9B10
-:1039100071BAB86C9F5DEFC2FC0B4BF17D4C217A04
-:1039200071F2CBF8B8BDFD06DFF9CFF587EF27C7F9
-:10393000F344C16F567F0B3E8257CA145FB79FCBCB
-:10394000DC5467AFCF1D868FF3C3355DB59FDB3485
-:10395000F8ECE3CD0CDADFCF2EB2D73760FCE6937C
-:10396000ACDBC1774F8F31BFA37E06BFDE92BBEFCA
-:103970007B227F4BE3A86186E3F42FD83B7F1ED0E8
-:1039800041A1CEED8EC2F90B1B726B504E31916787
-:1039900092D9FE2814FA5E697F49C9417FD4E4EDCB
-:1039A000934BDE9A9183E7C5758CCED3A3EA3DB1E4
-:1039B0001C23658FF4ABE55988E7CFDF1EB9DB9B8D
-:1039C0009E7793B2471E78D5A8C9608FA8F748267E
-:1039D0008C336B09D82355E9F648AB8432287B0930
-:1039E000D823647744DF437C8D6497FCD8B2EFFD25
-:1039F00099EDEA3FA85CCF829EF9A7CFA267C6796E
-:103A0000CD7F513F077B605A89B13292810E3F5082
-:103A100079BCC3D29F8DC1848267E7A03755173C1C
-:103A2000BFB62EF9128AE30E7D6710D70DEB71B980
-:103A30006A3FFD7ACEA81C9E892ACF8319A9DFB7D9
-:103A400046F057BC9A57D82DF6FDEE5FF08E2EA3A8
-:103A5000FF027E0CFA2F495FD9368C0B9E89A91480
-:103A6000AF53E7AFDC3D17E909EC6C4ECFE7B7AFDA
-:103A7000AF1D926D7C3CED6C968DEFEB99FD9C6ECD
-:103A800086C77E4ED7A8DBCFE96685ECE774730C5A
-:103A9000FB39DDF595F6733AA77D3F73B4EBBFA70D
-:103AA0007D1F6A64C44F17B0EF819F6E427A1A89F6
-:103AB0009FAECB37EE8F64D8EF6A8DDBA9ABBD919B
-:103AC000054877D30C6ED74563EB291F302F0AF2D8
-:103AD000A694E28614F7B2E25A56DCCBCA0BB4E2E3
-:103AE00059CEF89515F7B2E258528CC7AD9A3DD130
-:103AF00015086F73FB4919E588FE1CCC838C609D0B
-:103B0000E30D8BCF7179D0D29E392EE78CBF8DD843
-:103B1000EE53F2D5E7A01FD6E37A2DFD007CFEE040
-:103B200067E173905BDB70BC7F417E1F45F2A49B15
-:103B3000F6AF02708D763AEC838671FA05A7F763CB
-:103B40003C4E3DEE26BEBD58FF17131D64D8B42869
-:103B5000F8E018CF8AC64A49BF587C63F189D33F41
-:103B60001EC61FFFD5FC7391FE31F0CFF75CE7D185
-:103B700047C01FCF23BEA75572FC3AF9C1A27F20D0
-:103B80008984548DFB1D4D607B8BDED98B6113E1E5
-:103B90009C28FC9A13A335F22F4E3CFFEFFC1CF639
-:103BA000794F789C5823BE9FD85D10DF569AE23338
-:103BB0008B9FDA3DD11FBBD2F240AC7CC7C31EF352
-:103BC000757C1E52FB12E8AF8466B3F00683F8ECF6
-:103BD000187FCEF9D41766143FFDCC7ED95E571CF2
-:103BE000CF875AA4A1A58CFC56A621DFAA429EBC71
-:103BF00098153D89F86C9E1E29E1F43434CE077087
-:103C0000FDA243217FEDB3F253F348F83F878FE8DD
-:103C100090AB76787E40BADC42F9160A69F10D5213
-:103C2000067925F01567E131B83ED8CF7F473CE6ED
-:103C30005531899623F8B8D963FEC1F5D9EC0F4503
-:103C4000AB4DF131E0CDA3A15CAC06BC950FC7DB59
-:103C500049175FBF93FE426A5246FA0F811CDD206E
-:103C6000A59D930ABC58EB19493E5B749A76DE1009
-:103C7000D2D2D7FBFFA85CB6E4E5E59EE864DC079A
-:103C8000B71911F2CFA4FD75CA99E176904CE78C73
-:103C900067C0EEC16E172B5FA79DF5E261099B7AA5
-:103CA00056A1F2DAB37478C2BE78369B4AF36C3E02
-:103CB00095F56773A99C7EF6122A679C1D4D65C316
-:103CC0005900064C9CC6B3A554CE3C7B0595B3CE9B
-:103CD0008EA772F6D9ABA8DD9CB393A8BCEEEC1707
-:103CE000A8BCFEEC142A9DF68FB15E25F96DC92F94
-:103CF0004BBE3BE5B725FFFEAFC9EF58C345D93FE3
-:103D0000A0FFBEAA9D477E8F242F80AFEFD3D2E5C0
-:103D1000444A3FDFAF7D06BE3E2EF814F8F73D8CD7
-:103D2000C378C08BA3385598C7A9028666609EC623
-:103D30003E6C025BEA2F8D9CC4B841F3028F1E03D8
-:103D4000B8074A35924FDB821A9DBB6D96F4D15C61
-:103D50001E2413487F3B431A8DB7ED8F8A17F31744
-:103D60005E1A5510C079BAFDB28EEDBF959BDC7717
-:103D70000B9EE34F61E14330DE8A3D7B3CE97EF8F8
-:103D80007E340E00BE40EC69C680AF378EFADD523D
-:103D90009CCF3795513C064A3353BED837DDE27C81
-:103DA0005A1D0A219EB6FA64D207DDBA47E4A1265D
-:103DB000075AD0CFAD93D9369877C3E877B620D8D5
-:103DC000EAB8B21D6550DF5957E6C54D7AFA950F2E
-:103DD00042644FC03B0405CA8428CD1CD89F4E6F57
-:103DE000D838DF799B620CAD4362C5FEEEEA91DB09
-:103DF0006DF20F84903E3A264DAEBC05E6EF9D5421
-:103E0000301AE7DF5E73D4860F45B7C753140C38FA
-:103E1000A21F5E97A4B8DA06D9D85106EB0B887CAE
-:103E20006B00B33292967760C1A184611D1CAE8491
-:103E3000C2D7C30AE0796E5D2296E4EB3531EEEA33
-:103E4000F32543E82F2A75A729DED6E94F2EA2BA1B
-:103E5000030E6BFCDF6A565E00E71B9FE09BE649A2
-:103E6000DF5E4479E4551AED5BB76B6801D6636B8E
-:103E70005DECF10CF19B0D829FB7559E3F2EA3FA8E
-:103E8000EC70747BEDFEA205CFFBA274C2D1EC1ADC
-:103E90001A9569FF3EEDFC175AF7E73D5FE708F911
-:103EA0000397BBEDFB1010F2BC79CAB743782E6EB6
-:103EB000C1D329C13ED47CFEFBD03C85CBEBCF7B6C
-:103EC000BDFFD3C6FDBDC6E32AC0A7B3CB31CE38F4
-:103ED000667208E3B53E2B1E1D8E537E5200E3D161
-:103EE000D4CB203DA4EA7C0C456509E44339FBC3EF
-:103EF00004EE9352AD190AC9D9CCFBAE8437515E9A
-:103F00009B933F2DB8E96FB2301DE8FCD06BC5A77D
-:103F10000D7532BF2F81F15F8559E7B33C3E6DF5DA
-:103F2000572B648A4753203B6D1C15F4309EE328C1
-:103F300018A7CE1B3EFF7753F4689FBF88C7C715ED
-:103F400095FB81EF491C1FB15715CAF7EC7A9ECB40
-:103F500037769C91FCEEAA35E85C6507FC8FFE4342
-:103F6000ACD61747BA551CF978672AA787508E5ADE
-:103F700071719A8F9F0F509C1BF314296E6EB00ABB
-:103F80007CDF2D40B3C651ADB87CE59A49D8CE6FE1
-:103F900030CF73B03E7F1D4B5C02F006DDAD5B2F72
-:103FA0002FCD100FAF5CF38D2761DEDD4F4DFFD5B8
-:103FB0009350DF25875FAD8376F95FAE23BC3AE38C
-:103FC000E1DB2A655347F9E0F31DC27D051B9AE842
-:103FD000E2D61E2986CFB37DBE837CBF5B430AE257
-:103FE00005F424E2C5EBCC8B4CC77719C2B17360E2
-:103FF0001EFCDBBB75DE329C17E1C6FCCA15BDF5A5
-:104000001AEA99E012FBF985BFC95EF756D9E1DCDF
-:104010002AF6EF42F4EFCC43EC31E72D42BA3D13E0
-:10402000D418CA9B8D6BAFBE91E4FE76858D2BCDE7
-:1040300040BF8E75756A2ED2FFDD46FDDE0AD41BA9
-:104040000D1AE5F574C7BD714CF1DE5E973A37B1D4
-:10405000D9EF86C6CFB16AE4843B931D2FCEC70249
-:10406000E219739C8375CF96C9AEE9EEE1F358E38C
-:1040700075D7BDE5413931D2B84F8F318FB8D19E58
-:104080008AE65DD4BD8BFB36BA385D4FD1E252294A
-:10409000DAA3FAC24550DF3C4E267B8809FFAFFB0E
-:1040A0005A7E9EF8B066D8EE576C9AB292EC869B18
-:1040B000DCBAE02FB00B27A4EE5B1CF09A2FB8E11E
-:1040C000B9FA1C8C04F6C07BB9E11B912E1A831F30
-:1040D000911D756B91AC237DADD8D348EBDAACCB99
-:1040E0002C8176AFDA4A466A136B35F13C00133502
-:1040F00091EEE6C01B99EE45240F75029C73C61520
-:104100004EDA063577512BE5B1341A12F961D70131
-:1041100066501EB4144754A90AFBCD7F07EDBE3983
-:10412000C15219FDFDEB54D6A0A5D9E760171F7346
-:10413000A7ADEBC4B83D41B90AE7877970FE451ECB
-:10414000BA4FE046FBF8CA947D3C1111996627FFEF
-:104150001A8D4A8C6714257E4F79DEDF4FCA382FBF
-:104160007B81556F933EB95F0DFEE52F713FE3CC28
-:10417000E8C754C3CF1A97F8BA26F649DC5B39EC86
-:1041800089FC06C7B7E20113357EBF79730B0BC7F5
-:10419000D2E22A9B9FFFF3E368AF5AF197737977D6
-:1041A000024E0BEE4D12CB223DEF89FEC19DEE1764
-:1041B000B364D9DC099F1FDC19F2E57CB5C04F63FD
-:1041C00005FFE4D55678516E8EC57C1FDC87762EB0
-:1041D0004F4CF82F3DDF4711CC170CB7F6CBC6700C
-:1041E000B9A4887B5340D712DAB1CE7C2005F37E88
-:1041F000260E971B0704FD5FE211F93F93D964EE89
-:1042000087DBCFAFFC4BB9DE67AD7919EFA17E5FDD
-:10421000E8FD17855F9910F71A8F8A7B8B2FAF33D4
-:10422000C8CF7B655D259503EBC2F4FCB57575546D
-:10423000A6EE57F179F3851DA662500DCFF97D2CBE
-:104240006E00BCFE516B064A91CFEBF8FDEEEEA678
-:10425000535BCAC96EE4E7169B8BAA1385E8BF00BF
-:10426000ACF95077F9FA3CFC9E97395859C0D51CE7
-:10427000E2FDBFFABCC24917BAB5FF8EFDF6B156D2
-:1042800086F22E60DAF73B3BECF46FF8FEBB8A2E29
-:104290006EDF7BF11FB08F5FB2F6FD6A7635FF3EB1
-:1042A000C3C5C963E4A34A2107C6003F1D007FDEE2
-:1042B000ADF07CF57C9EE76A8638BF992AAFC7C609
-:1042C0008BF62E4E426C208FE7B517F3F304EA8786
-:1042D00079E5F81EC3922FF0F816CB11F9EF63C5FC
-:1042E00038ABC5B813ABE9DE2E3FFF677D3A963E8B
-:1042F00096A47A2EF0019641D62A2132C7B041F217
-:10430000B78BA521AA1B929E85F532295CC6FDF0CC
-:1043100038E9CF72C5FC7605213F22F3785172311E
-:10432000D993A097512EC6D5C822942F1BDAB4304A
-:1043300060E25C9E1CDE9FC372435FCD009E7FC423
-:104340006232C91FE53996A55F49F61EE9AF0DEB4C
-:10435000F30E6653BE4692F2DCF77B4A6D7A6AA290
-:104360006FE1753AECD746914FE782FE2C43FEA9E8
-:10437000954F07E396647A6F951BFDDAA24C7EFF9A
-:10438000C31E49C43392A3290E28F6353E55CE7874
-:104390009F719F87DB358F9666B6A7197B90C6DB2A
-:1043A000EFD11DE3265BE8FE8CCEE31B592E93F282
-:1043B0006B36B6F17BFA16FE46835D8BF6F0C6BE11
-:1043C000F9B391BF63952AE59BC3FA7D883F97C8EF
-:1043D0004BDE383E78309BC7254A514EF723FE6AA4
-:1043E000D3F0175CD984F8EB7895E7F7823EF7B104
-:1043F0000CF98616FE5C3EF6C54CEFADB26394B682
-:1044000028D3BDE1A31ECB4E4F96723AE1F8CBBA4A
-:10441000568D646A9F10F82E2963D1F3E1AFDFA3B4
-:10442000DBC6B5CE7D9511E25D922F4171AE891A42
-:10443000B733362CE678DDF0FC35C7A369E710BF4B
-:10444000C421A7A4E2C156DCD8D29BED9EE83F7AF6
-:1044500046A5F425FB3E23B9CB5EF01CC47DCB7092
-:104460000E71CA539BE11CA2E7E2BEEF3256F0ED9B
-:10447000A12D47E7E13C7F55C7C8BE0A3CC3E7CD45
-:10448000D5595C2EC5EF149812C659AE89E8F56867
-:10449000BFB9DA9989F9336345DCA6B0BD4F41BA9B
-:1044A00008C25E164A78AF2919C3EF998CDDCDC8D2
-:1044B0004F540B67AE5A6F08519A961FA5B0A17E54
-:1044C0005A5FBB663C5E4A60FD14F5C318F13ED0EE
-:1044D0003EF3572837C744A294870BFD627EB42F62
-:1044E000041E0BBC9C6F9737842509DA0783498A21
-:1044F0004F3AE5FA18C0CF2569F65B40D4D92A2E89
-:10450000A765F80FF57C7EC42EB7C739EE45071CAA
-:10451000792FB95E91EF6EC9ED22BEA913D441394E
-:10452000935F9ED2AF0EF8508655A7FA07ACFA6794
-:10453000840F0881E8D98207AF52A2DCDDE3D2BF45
-:10454000F214EAE77A8DE79189FB72D902EF3E74A3
-:1045500098A1DDC094574CDCD71D61FE5D9A3353A2
-:10456000E7911F9A5D67DDA7E3F795A18C619C2E0B
-:104570005BCC6FDDABCB66C69BE5400FD96692EE98
-:10458000D5E9D677154C96C03C1CDD27531E9DEE11
-:104590008B907CEA59E0D1F13B1F9AB8A7E712F75C
-:1045A000C7B3CDD374BF2E7BD8FAF8FD3A0BEEEC2F
-:1045B000ACAA37CB0DDB3CEB31BE0D6B1F9DF17E02
-:1045C0005D1DF793B24D1E87481B9FEED7ED985A9D
-:1045D00066BB5F47F3A01F27E8CFBA67E784EB5CB1
-:1045E000BF9ACC76DA84B0DD8EB8D0FD3A57C8DEFB
-:1045F0007EC705F2B33EF1FD3A818761ED1CF6A05E
-:10460000CBB24347C90CF7EF4C834CDF11C9FD28EF
-:10461000199921515C82F4BD65E7E5F1A1FEDBD972
-:104620007979565EBFC3CEB3ECB7DCD9767C3BED6F
-:104630003E775584FA5CAC9DB70BFF01F4F290D73E
-:1046400061E73565A60FA7BCC86783BBAF84718ED1
-:10465000D6FE48C17CB55DB9FCFB476C987FF0D6AF
-:104660000CDA171FFFDED1AE29FD2A7EFFE6774B5D
-:1046700019D949561CC12D60DE5524AFA7B07BD790
-:1046800043849FA0C043137E80AC8670151F477C77
-:10469000667A316F21BF8951A3C28A30ED3B7E9685
-:1046A00040A64B5B3115F5783D62250D4F333CF646
-:1046B000EF0434EAF98E7DB4EFF3B973F007F9F73C
-:1046C00014E618F67DB7FC24346771BEEB2BED744D
-:1046D00070428A0C2AD0E5E9AC5261FF0CEAA82F9F
-:1046E000BBD7BAC86E7C6849D9D62BD15F0DCA3A00
-:1046F0003F8E1C1A87F651F351D38B76DEF6C874C1
-:10470000EF3878FF50871246F3F0A9256B5EC57A23
-:104710006CB78BECA0A7FAE615AC48E3BBCDBB1792
-:104720002C5C8CEF3B5CA4DF57ECB96FA03488FDA8
-:104730005DB5E9DF9B6AD9789F8E7EDB1BB5DE8C89
-:1047400076CCD559DC2ED9A82529FEB4719EC6D0C9
-:10475000E5DA58523F7A05DA0FD76819EF93DF95FB
-:10476000E5E6F7F95CAD12CAF7C268E67B0156BB15
-:10477000B135BFA5738CE06C99A11FE7BA7E9E8C02
-:10478000F587605F7529454F79829E3616DDBBB58A
-:1047900002D73790F9DEA155AECD1AC7E93462E7EA
-:1047A000735761D3685CB7CB1D19A847E22A94758B
-:1047B0008C8BB8DCAD919BD11EBDDA8514CE3677DB
-:1047C000FCB06111EE4B58D2259827A84656119D92
-:1047D00005B318EA8386259156C44B21E83F0CEDBA
-:1047E0001516FD92CE290AEB34E685BA67494FC209
-:1047F00005EF3D15D1AB10EF2FADE5DF79290CFAB0
-:10480000E85E5061849FC315B6BB199A0C1BC105A5
-:1048100076917F20519CC8C947D6BA9A977239BE03
-:104820007BED6F4765FADE4C455619E1D56BD8D75D
-:10483000ED41BD0BE34C35079710BE6BDC2C4EFCF5
-:10484000EB26FADE55EB22B8764D39F91584EB7775
-:10485000BFCFA2FDBE969912C2953FC4CF59AD7984
-:10486000F29B06151E0FE77CE8E43B8B1F9CF0EDE6
-:104870009C3D8FCEE336B3C1F988EFD85999E868EB
-:1048800073D11A6F7A5CB455D01FEC03C99798CED8
-:1048900068BF957F65EB311F76E3172395C81F6FBF
-:1048A0007BF9BDD5FB966AB48E87E66A146F7CC827
-:1048B000DF4A747F6AA32B7C08C151F585B89FBB82
-:1048C0008B2BC2186FFB3B3C7C4EF30F768FFA525A
-:1048D00025E2F38B7FC8E2E34C51AD717E46F45E76
-:1048E000EB25386728ED3F5B8176E8127932E54E9B
-:1048F000AF5A42F2CB25E4F8CB4BF2EAD14F09DCB8
-:10490000B09C7179C8E31481B5D5FC3E8343EE2792
-:10491000EAD4DD33689778FCA75EC8BBB1374CAFEB
-:10492000C775D60BBD60AA99BFCB982BDA170E4579
-:10493000D0241B16FFC915FA63EC6EC773A117725A
-:1049400087C5C1072B6E06F9F3A52C61478E10F7BA
-:10495000D9B5641EF1C319E0078A4B979C24FA8FDE
-:10496000819C40BBF90D29195A91761E667D67EE30
-:1049700027221E14314B294FF82D110FFAA9F8EEFA
-:10498000DC3B221E745CC4837E2EE241FF80F1205A
-:10499000FC7E98F772DAB771751FF5631C6767CDF7
-:1049A000028F01E34CD5075F4220BF680EFA44FE38
-:1049B0003DC11BB4F4D0DCF3C7A91208971BE35226
-:1049C0001CCE97C5F7E85E11700D08B85E137059DC
-:1049D0007A10E506D2191BABEA99E461506D95F0A7
-:1049E000BC17E5457F90E405CF130FAE918C09C34A
-:1049F000E5048C373ADD4EB7E8EFD4281FD1B17308
-:104A0000FC47B3F8BDC397D6CEDACF8269F228B29D
-:104A10007015D25D3EEC0FCAA3681397E351BC77C3
-:104A2000912657AD781AEC4898F4CE0D1C4F23C947
-:104A3000970BC99542875CD98D7205EABB51AE04CC
-:104A4000D3E54A6B3FAE3B887285A5F45030F2C97E
-:104A5000E4CACFBC65B63889255FAE0636263B3141
-:104A60000CFAD4FFE9F5E9DB424E5C48AF5AF91F76
-:104A70000193915EDF837921E8CF8C67740F473112
-:104A800007299F28B7DDC5301F642B76198DFECC12
-:104A900042CA07D931DFA3235D3C2C254288CF7D54
-:104AA000528F97EF8BDE8FF6C2B6093C4EB2E38F82
-:104AB000F778D1CE7EE9F682009EE3F4E65A7920BB
-:104AC000FAE25BA17EAA91119DACD8B3C296F7F031
-:104AD000F3AC3CC2476E0CE40FE0E3E1DBB9FED17E
-:104AE0000D9E070265C63C10B74FC483D45808E931
-:104AF000639B14F5501CA651263DD51BE6F92BBD32
-:104B0000E097E3F9606FC3CE39A89F37DC2A33CA38
-:104B100017AFECB907E54CC7848506F2A56B74D9CD
-:104B20009B688E6FF0C9DEF43C523C4ED0AAF9B9B6
-:104B3000A128CD1C0079B3D734CE777F54157E1FC2
-:104B4000F6779F270FBE3337341AE304BD8D0B432E
-:104B5000386FEFA848288FF253C6903DB071D4A6A5
-:104B6000C5187FEA58AEB1743B69D87C41BB7D6DF6
-:104B7000C519D5069E3FD22173FF32579C4F035F64
-:104B80005522DED2D78970AA26CF1FC1F52A7CBD57
-:104B9000F47DD3DC06F00FABF8FAD17FD57DFA684F
-:104BA000941F6A03CF1FD9ECD717A3DFE884C31A79
-:104BB000FFDA6CC9E61FE956DE42FD1A7E8E58C444
-:104BC000F3167A5DE7CF5BE810F2D0F21B47C2879D
-:104BD000CB714EDDEBB5C7012D78AE14A5138E91C8
-:104BE000F2053EEDFC175AF7E73DDF4879046BB25A
-:104BF00025DBFD8A5C2B9FA5714D08E58405CFE67A
-:104C00000BE48F7C5AB89A1B79FBCF7BBDFFD3C6D0
-:104C1000ADCFE6FA11F87400EF51764C9C19423989
-:104C2000948AC70C0D94A33D27EE335AF9232E9D89
-:104C3000FF5355F977EEE4EC22FACEB23A9DE78FB6
-:104C4000D05F863C904D8CCD467F4715F11B279F4A
-:104C50005E087E67DEC8CD3EE137461DF3893C1114
-:104C6000E6C83B51433CBFC4CA27E992607DC154AA
-:104C70003EC888F33AF0365EC8FDF71CFD87AD3BB1
-:104C8000CCEF575AF927C3F248A6CAFB710B86E549
-:104C900091887C949E5C23CEF3C4795E09AA4D8CE6
-:104CA000E70DCB23993A3D84DF949C5622FADDC070
-:104CB000E8FBBB3D5E5EEF9DC3E2F8BDB35EAC2397
-:104CC0003FD532CA6B19965F32750DE14963916524
-:104CD000FC7C879FF75B7870E6975C90DE2E9047B0
-:104CE00012F459DFA388D03C3DFEF04FEA083E990C
-:104CF000CEE30BBE743C9C3EFE253E2E277B441E1D
-:104D00005E4FAE3D1FEF3EB12F15A29D737FF52282
-:104D10004ED75DF53AC5DDDD0D3C5E39EC3B103517
-:104D2000767FC019CF3B21E4F585D6EF8CEB6D1B68
-:104D3000E1BED9021FCFE37A68C921CA8B3DB30A0D
-:104D4000F42CE0EB61CC67A9B9F87C96D7B3783E38
-:104D50004BAF51BFF052D463518DA13CEDC57C16D1
-:104D600078BFA161847C16114FB4E2A323E5B3E4BC
-:104D70009E3B8FB7E7B3F4DECAF3597A7BF83CD693
-:104D800078BD0DD564678D34EED3634CD987FB5F56
-:104D90007171E7A7D34A227F86F92B3DA59AFEA021
-:104DA00081F4C2E9B9AB5123FAEE72713F36369AFB
-:104DB000FBCD4C8D8716429B2DFEC4228A278BBCCF
-:104DC0008C5E717FFEEFB30C9B7DDCD9F8DD10DAD1
-:104DD000F540872FEB9C4F689C7CB5743DD880CC08
-:104DE000ADB798E8530E64F338822B746CA02E8D07
-:104DF0004EB7087D87F891013FB9D2397C45E5026D
-:104E00008AEED3DF1A419F6F64F3F92D3A64EAA466
-:104E1000303FFF631528472CFF75583B0F6F374C09
-:104E2000FE38E4480FE6B761C592273758F2C44E02
-:104E30009796FC600E39734E9ECCE176FA39790272
-:104E4000F2033F75E69443BD5EAE2F2C78DC2898C4
-:104E5000418EBCE70ADBE2344EB973213EFABCE571
-:104E6000CE4BD9F9C2FEE0722788B4817C936D9D48
-:104E700023F27B0F67A63E48F2D0A3F2757B228C0B
-:104E80007E2700EB28CF3D788E9251AE574B146FA2
-:104E900010E722F9E2FB830FBBC2949FF630F03398
-:104EA000FA79130CA77D76FE7305E779D2C36BBF41
-:104EB000C6FD33C037FA5D172B872C39F161365F99
-:104EC000F739FA32399C167DA5D1337D5FC0A25FD8
-:104ED0006B5C8B8E193268C179E855D03586A32971
-:104EE0004E1D93E21807B1F2C8ACF1DEF0717B649D
-:104EF000A4FB5556BBEF587ED7B978B01ED0299F7A
-:104F0000AC87EE9BB32E4E7F73D86E754D15E513AF
-:104F1000A88CF2092225E8CF1CF6D9FD622B1F6C64
-:104F20005A493884726283B0D3AD3C322B2FEDB036
-:104F30002FD73A67B6E5A76D18E17EF69BE7F073C9
-:104F4000F1DF3FC1EFB6ADF69A8FA35C047C99E226
-:104F50007B4E9487668DFB5D81A7D73DE693BECFE0
-:104F6000707FF2C52C7BDE55A7CF70C405385E2755
-:104F7000EAB17ABA8F17E5F7AA9CE7EA23DD7F75D5
-:104F8000DEDB3B77FF559CBF377BA22F13FC2FF254
-:104F9000FC373D1C3DD8C93EBFF51CF09A3FC1F11E
-:104FA0003B057F4F0BF27B3BEF7BA26FE3F3EB18EC
-:104FB000F7AB2D3BE730B683FEFE97416A03BD6C2D
-:104FC000AAE5F45A54C9E8FBE3D35B797DC752FEE6
-:104FD0005DD3FED7F9BD8F6D51FE3D53E8D7270352
-:104FE0005E768CE7FA707F15EFB71FEF37219F567B
-:104FF00070BB2B0FA3F70A8AEB2895D36B7ABC13EF
-:10500000E0FD81A532C545F708BE083093E21CDB00
-:105010002AF93CBB2AE427C4F76816DD02F5CED98D
-:105020002B27E3FD92ED229EB26FF1CA2730AFEF3E
-:105030008340B9A0BB04DD7BED397E1BC5471E5AFA
-:105040009227AD8435EE3B9839BFA5CAAF8A7E3131
-:10505000B788278932A161B9D51479ABAD4C7C8F63
-:105060003DA661FCE999419EB7DABDFA99633351D7
-:105070001F57CA9467D63578D47B19AEBB8EE7F537
-:1050800014A90929DD7FF1FA5DDC4EAB39EA31AABA
-:1050900086B77F66F028D1DD76C0BB92E6FFC902F5
-:1050A000CE6EF427A0DF5E57CFC04C68B7775C9E0A
-:1050B000143352ED46FB39FF752F91C577E8197D02
-:1050C000C7A1D33CE541B9D989E71FD0BEBBC6CA49
-:1050D0004BEDA17B597BE74C9E8379E2DB6EE0C10F
-:1050E000D2AEF021F2937B6673BB6CAF04ED605FD0
-:1050F000F6B568D7D33DA6561E278232639CA81703
-:10510000138111AFE2DC8E525F60DECE86BE019C61
-:10511000A7A88E7FDFA2A82673FF17026EEABFCF73
-:1051200015A3F8E748FBF7AF3E8ECFCE2A7E5EC0D0
-:10513000589CE252BB85DFC5D4A891FE9DD0960055
-:10514000C7CF4E1733315EE6ABD348AFCB6183ECAC
-:10515000503FD88F188FDB26C516637E486C92C6E9
-:105160001E278C98DE7118BF9B901746FADB24250A
-:1051700042F85DE5D8381EDF3E1AD949F7AE0E80F9
-:105180001D4DE16096203DD51DCDA3FB504723D595
-:1051900083D4DF57A1BB2D8D8279F3F4A148C626B5
-:1051A0005DB6692BDA359D53641DF3363BA5FA28AD
-:1051B0008E17CBF5501CD935651EED9F6B549E9410
-:1051C000AE8F6EF473BD30342172A31FD6159A7260
-:1051D0002A17E396DB6B5FD987FBF7C8FD1EA2A3F6
-:1051E000476A07EFC679F69FBDEA7894F8929FD791
-:1051F0003D5A7BBA14ED9E5D4DA772117FC5189F75
-:10520000037D585CC1E368A801C93E537BD8CD80BB
-:10521000C7E2368D1969FAD8CBF8791EFEF92693C4
-:10522000DCA3BF67064F795A70BC252C7169809E3C
-:105230007B309E65C999E23A96280079B87FC53BD4
-:1052400031CC937B646201DDA32C12EF4972C278EA
-:105250002562BCFE375E598FED1EAD2E30505E14B8
-:105260000F0CCD4325515C759AE26C21EBFE47D4BF
-:10527000D87F2BD1A74CDFA92C0EBFF317B88E8097
-:10528000AF8FF41CB4A7B899731D8189E67D7EC0E9
-:10529000E337A5D657C70553FE18FD213FDECBEFF8
-:1052A000651767FDC35C252DDFB644C40536498309
-:1052B000B3C92E7D80DBE163599CE45C7155EC6ED3
-:1052C0009E6F1BA57C5BE7BCDBFDE7F4AB44F7A856
-:1052D000F39BC4BD12FE3B3625E2776C9C741F0A1B
-:1052E000E557755C95AAEF8B9E22FA7F5A33EECA7A
-:1052F000F4BD877D422E6C12FE9835FED85C3EBE12
-:10530000557F54E7F4F8F4CB79D757C17AFEAAADAC
-:105310006C12C63F778CE0C7AD0C70FACB1E000B49
-:1053200007F440FF6BAF79319FE56999AD4239557C
-:105330005F95F024AB041E617CF2C560FC03E16F55
-:105340007B502E7D35504970AD98CAE3069D550FB0
-:10535000D2395048E77A07F913E5BB2F149330EEA2
-:10536000BDBC86E98744BC2506F8A7BBF3324BE5F4
-:10537000F56FCF253F077885DFABC1DCA4C9E2F725
-:1053800027CAF19C68D3DD227F56467C778A7980D4
-:105390006F699E0345629CFBB8FD8FFE05F62F17D3
-:1053A000F394D77DF76BA8C78B744E1729F8FA3C96
-:1053B000045FABCC083E35F12AFAA1DB271518486B
-:1053C000370742E1B79BA0BE7C914AF1F8F21A0E72
-:1053D000C78156997E0FC85FA71DA4FB6326E88B83
-:1053E000347C1962DEA29A8484E75A462B5F17B494
-:1053F000F3A25C34C2000FD40DB1AE73F04FD208EB
-:10540000FE22CF20E6169DC3C34A1C0FE877651D18
-:10541000EFE70FF56D4139B6BC8EC30DFA9DE0295B
-:105420000A6B0751DF1785F878CB013F87A4145C1E
-:10543000D9165C7532E55F15D56807D10FCE16F029
-:10544000AD0C7378FA5F3F3520F1F10C1C2F5BC077
-:105450009B2DD64F09BB05423FC0784FB912F57856
-:105460002FE7D414661CE2B3513CCB7ABFAB15F0E6
-:1054700000F8F18B79D86E37F1132C31F6B1CC7F6F
-:105480003FC4488B5B54ECD66C75BFD83FD6C59FE4
-:10549000931F472A91D765E1D7ADACB2F763356961
-:1054A000F532BC5FC6E97DFDB5FCBCE3C0046E1FF0
-:1054B000A1DF718EBF91CEA7188F7505F1BD46FA99
-:1054C000AEA4DD3E6E716BC174940FC5030FCF9314
-:1054D000613D45F73259C9217A96CEC93F98EFDB35
-:1054E0006B12747F367B209287F2AEA4356F3A7EC2
-:1054F000FF2D7B204AF5EC815693E79F810B938724
-:10550000F97A69F394A29CE6F974AC55EB43B95669
-:105510009B0E27BC2F79B9672EF6DF7CF72BA39162
-:105520007F0B1CFD3D39DC7F287E195A0570FED3A8
-:105530006BB1BD15DFC94688F3A87C19CB621FC8C3
-:1055400063284B44FE9D252F3A27BC3329EA13F4E8
-:1055500043F9782C916EE73B4B683F5EB48F49E787
-:105560006D779ADA8D146F1A08F0785340D8AB3DF6
-:10557000CCD84FFABD86E77BF8F039E88FBE9AA306
-:10558000D3693FFB5818E9B9B8ED4FEE74797D73D4
-:10559000A054DC834E10DD6B255974BE077C4CDFB4
-:1055A000373DA0B6D2396B5F113FD73C3AE71509BA
-:1055B000F159F41CCFD3B6ECE5E93589103EEF7A0A
-:1055C000357A19F1E708F6A7656F3AD77349FD8375
-:1055D000240FC6469917CFD7FCAB55CA632D890255
-:1055E0005C55281780A40B01FE9AD87AA41B23CA05
-:1055F000EBC66A51AE82F26AB06FD70D94FFD295B6
-:105600001A776B05D8B5683F0DEEF6DC80F64A2BAD
-:10561000582306DA8BA73CF83D95EED6E9F988E7E2
-:105620006722967D999070FCA29F9A642FD6EA9A81
-:105630008E719809EEC4E8F473BA0373DEA9A6EF7D
-:1056400089CDBFB87CB291F409C222A7E991FEAA24
-:10565000A3A45F9EF08F273D64E9154B8FD088206F
-:105660005F6E117CD465243C12C92BE05D80F3167B
-:10567000942340C7FE222ECF410E733967E993BBB6
-:10568000B9DEB7E4678518E71694B7D0AFBBF689E3
-:10569000DC1B50AE0839EB0F1933F17CAE42C85712
-:1056A000A6C6249CEFC014FEBDCA80439E56B4F229
-:1056B00071BA428CE809F4D041A49B034509BA278A
-:1056C0007EA0F5A8947ECFD4D27781D624C3FD1FC7
-:1056D00057C7E5E0382157BFE337387D7AB85C3DDE
-:1056E000A7F784BCDD6A1E65E2BBB019F3B0FE5EAD
-:1056F000E8F39E8A43E4176CBBF514E1D38A8786EE
-:10570000443CB4BBEA2D7ABF3DCAEF01EC32A7CFCF
-:1057100021F823CB35CA3FAD393AA70CFD8DA6E55C
-:105720001ADA75270305D6F9977721DA93ADABC856
-:10573000FEF5897D7C28CC84DFA9919F75DFD26F2F
-:105740000F60FF10F84592818DFA3C6EA473FC9EA9
-:1057500002E23B3A489D7D35067D07C2B98EEF05D2
-:10576000F87769FDD1E4C038DA5799AEF4F86A18D1
-:10577000F99DCBC1AFC36177AB61EF0478BFBB4983
-:10578000D6D7B354FFFF15E0F96813FDFC9EC2CED7
-:10579000C5A7B7609C6FE752F19D3307FCF735F65C
-:1057A00079149A07630294C79CF17BFB55FE2CFE8B
-:1057B000FD859ABE01B4E703551CAE170306C7FB6F
-:1057C00020C7634F44263EDA3558ED457DE7B41BCC
-:1057D0001FC97E7712CF6BB1EB9B0BD58B1D727FF0
-:1057E00082BBEF3A9277DF94495E31C6E59DC4648F
-:1057F000037F57A325C0E9A94AC8EB0E57623FE6CD
-:1058000015743CEB63EB8D145D1489313B5BE58CC7
-:10581000BF9F7628A0F0FD1FBEEFDC7E10FBFEA42C
-:10582000C0C385F61FC32C684FF7C5378DB903E594
-:10583000782BF79FFB126F51DE51D1EC85E4F71CFA
-:10584000397829F9034555A6EDF735B347F05B2BB9
-:10585000723CE78D078C248FF7ADEE203F7BDF6035
-:10586000E67B3105393C2FAD0FE4257EDF64A4F9DA
-:10587000F51CCE7FFF14107437E71DFA5E469A9E22
-:105880007D59E859D2B7C52A8B2969790E1304FED0
-:105890009CFA93A971CFA53544E784BF7DE2FCE271
-:1058A000215326BC5B748EE7078857588729E890F8
-:1058B000CE377A58DC837C136BE2791E4EB827F81A
-:1058C000E58B5A5F3087FB21E7E613FEFA443F87FA
-:1058D0007B67EDFD74CF11E60B217D483FF88FD338
-:1058E000741FEA5917FD9EED8C675D098C69DD799F
-:1058F00090FFDEA2FCA297E0FCE7C3FCFBEA093FB5
-:10590000B7C77EADF3DF2BFAAA7BB0FB0B501F7A33
-:105910005661644FC6417101BD9E16F4CA9EE3F5FF
-:10592000955E5EBDF360FF321C6FD5733C0FF3CE06
-:10593000E76FBBF10B50BF6DC0457706EE7C7CBDB9
-:105940003606EAB7C7A53EACFF663AA3DFFB8CE597
-:105950006914E7FA4D60B06001E0FB83751E665C78
-:105960008671D2C182F980873BE24FCFC47E773CFB
-:105970002585916D673CFBF82BA301AE3BBF215100
-:10598000FED7578E64DBECC2D3B09469F07ECD4174
-:10599000FEBB91B7B19E99888F3B1FEFA5DF3FB447
-:1059A000F0F9C1BA4A66A4FD6ED89DDF789A7ECF21
-:1059B000F0AE6F49F4FB8A77C9FC1ED13F3FEF5D23
-:1059C000F4980FD7B75EBBD48FEBDAAC61BBDBE2E8
-:1059D0002DDFC594A63BE207B599F0FE8E0307B50F
-:1059E00095E897B95933EA9FAF1CB9C226774EEFB5
-:1059F00053C83F5893EBA1FBF5CC6786E64D18BE24
-:105A0000CF1FAC6336B8EEB0E2046A5C9B9BD6DE77
-:105A1000A573FFF72B4714DB3C961D103BC6F542E0
-:105A2000EC6FFD143FB7F66F8DF0BBADFD5B63050A
-:105A3000E2D5A1C999E0E9C6FD00787AD6E954EE2D
-:105A40005C17A272F73A83F6692FE211CA2E01772A
-:105A5000602AABC7EFF3074C9E769CD764D6E3DD94
-:105A6000B2BC08AF172C89921F32921D63957B5DE3
-:105A7000D116F4213B77F4CF52C1EED9AB45EFC636
-:105A8000C897DEF1EAAC06A8FF4D4E64630EC99BD1
-:105A9000B0817C67F9E75FCFE17277D3688DF0BDA5
-:105AA00077E9E4C714CBFFC2B8DFD2954FA03D0120
-:105AB000FDB7E710DF86E93B5D23F52F585667EB0E
-:105AC0005FB06C95D57F0FF5F79CBFFFDE65D7D82B
-:105AD000E75F7687D5FF1182DF777EF80B9AA7DA2A
-:105AE000E76F5E4DFDBFEAE6FB3B94EBA17CFA0E4F
-:105AF0006F38E122FF99D1F739D4BC4B0FD1F7931E
-:105B0000CEC599064DD4B3BEA772AB518EA5E86839
-:105B1000FA37711D7EE0AE743ACAA9CBB2F155AE28
-:105B20009967ABE7CF1E636B3F2A52667B5FB8E88D
-:105B300072075DFA74CA83655C9F9A18E70438B5EA
-:105B400031FC7B4DF5633CB4BEFB5FF452FDFE6B54
-:105B5000F8FAEE1FE3233E26DD05FB7EBF16BD32BD
-:105B6000DD3E86754918F27A468F0EE4D4A63F379B
-:105B7000647C9EA5F0DFB1CB72737DB9B974F2631A
-:105B8000B1347C6E29067A80FADB399A2DCEB3B90E
-:105B90007865A8256D9E4DC5DAA24355FCF92D68A0
-:105BA000C7EB91BFC3F9BEAA0D5D8AF6AB731E7732
-:105BB000599D6D1E4FC92A9A27E998C75DB2CA310F
-:105BC0008F67D121F15CCC730AE964A47936975DC3
-:105BD000635F4FC91D34CFAF719EDAB4F594DCE139
-:105BE00098278BAF079E8B797E73DEF5944FB5AF08
-:105BF00067EC6A9AE7DF1DF3B8C7AE76CCE3A3790A
-:105C0000F039CEC38AB81FA5B98756D2FEFFC0CBE4
-:105C1000300EA4B9A37F4D9754FEDE4B71616865C9
-:105C200062BBFF03D8CCA6FA008000000000000091
-:105C30001F8B080000000000000BE57D097854452B
-:105C4000B670DDBEF7F69274773AFB4208378010E3
-:105C500034C40E840C203A0D41061DC0E00A2ED03B
-:105C600061C99E74449C87A34E1AA28888DA286A68
-:105C700050601A04071CD0C0040810B001757006EB
-:105C800035BEE7B8CC82CD2241884983A8F866F1B9
-:105C9000AF73AA6EFADE4E079837F3FF6FDEFBE3B1
-:105CA0003753D4ADFD6C75CEA953D52427819051BF
-:105CB000841C8CA3E90842BE89715FEDB012F23DED
-:105CC000FCFD90D03F2F21C93C4D21642EE17FFE89
-:105CD000C5022924A4D6CCB273364FCD5A08694BDD
-:105CE000515A4901FDC70A9BF30A8590CE9622E3DB
-:105CF000ECDC707F6A3AD7279F0CE6B0B6DF93F0F2
-:105D000038DE7124A78E8E5F16E7C0F9A8F993F5E7
-:105D1000346F22E4583DC1B45D26338BE9F713F5A7
-:105D2000740283B5F35D88ED4E4AF49F49345D25D6
-:105D3000F8BD025DD7F20F64320087F93087AEE319
-:105D400076BE8CB9BE5842CCE179784CC405ED42A0
-:105D5000BB4CFE75027C75F531A4D1A43191107550
-:105D6000BEFD09F9D3BEC96F0B76CCF6318C24E4A5
-:105D7000CE255BDF826A1F09257DE7D1F54E6B5E7C
-:105D80002EF7A1F94E3938C369D5F4334D3E06EBF1
-:105D900036D3FFA09FE96E9AD78C7F57B93E7F0F0D
-:105DA00091C2F96C42AE72F4E7F8E0E32A7E19F092
-:105DB000753B5D533A45E13D900E836207E26B8689
-:105DC00083B555E7E379502601988F144C26B950D6
-:105DD000928CF5DC504FE939BF19B2D9554CF139E5
-:105DE000E30111E11839DFE0BE5897218FA68D5FDE
-:105DF000C9A4FFA5E73F7381BE9C78D9782A5C557A
-:105E00003AB863DAD8674F68E863BAFB86674FE849
-:105E1000E0345597BFA76EBAAEFECC0525BAF21294
-:105E20006F85AE7CF6927B75F9B9BE0774F5CB1A17
-:105E300017EACA2BFC8FEBCAAB362ED7E56B9A5606
-:105E4000EAEA7B5AD6EACA0DFB86DC44281C1B7E94
-:105E500027121385E3D7D6934F5D9304A9E404B8C2
-:105E60009FAA4F43BA3E5DAF605A0BB4370AF8673A
-:105E7000B8D94DF1E48909959278421EF68D59B250
-:105E8000640CCD1B69F9684AEDBE714BBC99842C3A
-:105E9000712848F762A3910428A90A24A19BAE4364
-:105EA000A2A63C7889F246890486F72C1783D1BFD5
-:105EB0007709A14119741DDE4F4D6483D093CFC380
-:105EC0007C49FA90B4DECB3B0CA4BC49237736382E
-:105ED0000C389F64C7B80D0E4A0FD546C6EFD5DB08
-:105EE000D2C7113BE40383EAAC1719AF894E2615DC
-:105EF000FA61FC52E1EF13E65FC4DF001DDF0F8E95
-:105F000073AF77D0F13AF68BD3601E247030EB96E6
-:105F1000A130BE6B037C272DB49374CADFF5AE6746
-:105F20004F5C41C827F51331FD7D7DF1B3276442F5
-:105F3000FE583F0DF347EADD9806EBCB313D565F47
-:105F400087E527EA1760FE64BD17D353F54B303D54
-:105F50005DEFC3F28EFA46CC77D6FB3155F980CA95
-:105F6000A399C5C0A7C5C506E0D37916C2FF58FEE0
-:105F70001C5F8348FFDD867CED4C03BE3E67FD66FB
-:105F80005006A5B7739F5062CAEE1D4E9174D73B61
-:105F9000FE5C06C05FA99F124F62CF724B0CC38F8D
-:105FA000C54026122A7F1EBFC248243A7ECC1B570A
-:105FB000AD13B3F1BB04A443370EE7545B94FE0763
-:105FC00012C4D7A5F0A4D63FF9E29F0B67E5027E85
-:105FD000FA239DC41C14EB18DE5E7602DE2E053F0C
-:105FE00089F357241C8537FE9415A4F5BF4C56E160
-:105FF000D99645687A8BA3F814D0C1B96613AEEB75
-:106000005C6BAC9F401F8E24A48BDEE1C6E651B5CD
-:10601000D1E2D3CA879AA6789F5E5EA4FBB4F2E26F
-:10602000DCA197EDC0F7F3D244DF89E1401F2E4E8B
-:106030001F8CEED4FE6B9AB27D565D3FFAFC399F01
-:1060400030B109E5BC1277EBD0DEE7392FCD88E31C
-:106050009CDE38200EC63D5D6FF6C1381DF50E1F63
-:106060001B37CDA7A5CBEA05B1BE1389E1F9F5D65B
-:10607000EF3F7B7E843493E36682A0FF7E40EFF5A2
-:106080007BC58774DE580CF4D12A7F03FB4E4C8EFF
-:10609000BAEF489857FBF534895ED3D5F07DB36EDF
-:1060A0003CDA4E39A9E2A9FFC5F02E9193EA3AA94C
-:1060B0009C1C4A6537D0292566C4B39BF61847FB5C
-:1060C000EB92AC4B043A8E295EC1720F0C44E9A9E5
-:1060D000C61C34BA1504771BE859B346AA7CAFDC5A
-:1060E000F1074A725FFC56264BA1FC2FB4775A2E5B
-:1060F000F3D239A4D84EE878B39AAB26819CFC62DF
-:10610000C78FB99EE22B84757F490C13814FBE2443
-:10611000FF6E1FAED1CBA6C41BD9FC96B0FDD94BE8
-:10612000FF83F5513D4DB75F9735EAF3A5E4E614DB
-:10613000E087D21532F1D3B957C07EAFAE9BF2FDE6
-:1061400075F14C8F2B23758B414F592A936980EF42
-:10615000590E22F5A172A266E7EAC2129ABF2DDE9D
-:106160008074759AEA770A954315094C8FA94CF209
-:106170001B5DB4FC78F3F0DBAF21D0DEBF18E49AEE
-:10618000D7469C1B484FB8CF5EA29FDFA5E61F39BC
-:106190005F4216E17CD579A8FDAAF310370A2E7F5D
-:1061A000147D7676BC10D693697A5FBC5E7F5D0005
-:1061B000798D7EFB70447E51445EA51399D3892965
-:1061C000DEBD203E19E8223401F53442E923375C74
-:1061D000CF18AEF7F0C5EA99A09E88F5165DAC9E83
-:1061E00025DCDF63D1EAD5ECDCB2C34BE9A9F2F5DB
-:1061F000E7EC84CAF32F245F8A937EAFDEF0A81DFC
-:10620000E0744AF2DA01DF5FF8C589D1E0B5AF1B6F
-:106210005E2EAB007604923685FBAB4F4C013DE918
-:106220009B0DB243A4553C1B4D0113A5DFDAE68A52
-:1062300049240FF34759FEB1B322E45BF4F8ACFCF8
-:10624000C573298A0DF1C0F46D1240BDA376FDE738
-:1062500013408E7B4808E930B21D8C7F2101F9BEC6
-:10626000C418D7B39CCE13F5640FE7334FF313670D
-:10627000453BA437B4039F7922E8A8BC7B7F091A69
-:106280008BE97C5E8FB7259DBC8A667F407E00F2DD
-:1062900040850BF133BDA261D30B7947E9BC3AD6F7
-:1062A000FFD62EE46AE508A3C7734DB37FBE5BE952
-:1062B0005DDE7472BB28DCCE8FED9416A607915676
-:1062C0009656CB013BE89DD56B6527A55452BDE59D
-:1062D000E5575E047BED5313DA6B555BDEFA6834E9
-:1062E000CD576D959326B1E5588594307E3CF47F6B
-:1062F0000B8685F151F9ABB78CCA50F6FDA18430FD
-:106300005EAAB6EE3792A13DE158D4B4DF18B44688
-:10631000C14FD3D109A0B7346CFAD608F6D717FB12
-:1063200004929ADDB37DF9DAB7705F0438213E3903
-:10633000BEBAF1D7036F8129BB0BB09E03E4E5A57C
-:10634000F0E6E372BA66A78DC4D37994FFDEE49FCA
-:1063500004F87CED3E3BACA75DAA6374BEFAD11491
-:10636000171DBF5CF6A6383065DFCBD7DC8FF4573E
-:1063700026D4A538909F5CE90694DDDE7458E7DCEE
-:1063800055B7E13A4B891BE9B07CB558ECA7E9D782
-:106390001299B8350A9F1426303E695F47914BD752
-:1063A000D90E7A3FE8DBFF2EFA37A07D7A2F01F96C
-:1063B0007F3F5F33DD2931FFB599E1CB9A6050ED26
-:1063C00045B38E7ED73FD606783ADDD7950AF3A43B
-:1063D00070F072B809DFD37EC50FAE4F6578228AA0
-:1063E00054C8DBD1FDA008BE43FD36D965C9D3B57D
-:1063F000E3F2938D3F9F8F4FE71D03FB5B7B0AD535
-:10640000EFA3AC6F16AC0FF745BACF69E84CC3EFFA
-:106410008CFFD73FCEF85DE57FFFD489507EFE43E9
-:10642000C647D00EF6133AAF402A96EFBF5540F953
-:10643000602281687CBE5EE67CAE2FF7507E053F11
-:10644000814A2774FE9210A7A5173A4E02E201ED89
-:1064500095D215B4BD56BF8171B19E31FC5DB3AF0D
-:106460009471B9909F40E5416C581E9055C997A50D
-:106470004756CBC40B2A67F5A726B4C7ABB7C8C528
-:10648000B0FE339B0F7E7427A5F3334D2ADFEAE578
-:106490006A24DF966FDB20009D46F2ED9972BA8B7D
-:1064A00047E35BFA3D2ADF9607FF9FCA55157ED367
-:1064B00013F4F294CAC77EA042F406C748F9F8352F
-:1064C000E85BC93DE523FDFB9014F6A44395FE541B
-:1064D000BAA31A5C3F90EBDDF4A9D25F377DAAF432
-:1064E00017B95E3DFC22CBFB838D44E9A47817D518
-:1064F000E8283EAB5B05BF09F9DCFB769F0284937D
-:106500000BB737E27BBB4F9236EF8FC83745D47756
-:1065100045E48B23EABB23F275BAFAD52D078D0427
-:10652000F11FD0D5332D78891C8F620FAAFB8FA75E
-:10653000F9ACD10B7491193282DC931751D50DFC53
-:106540006B7B45F4AF7529217B02FDFEA885D969D7
-:106550005D0E9E8F67F950B27131C83DF57BC84220
-:10656000D03EEF2A0ED9E335F6FFD156D1AED0F2A8
-:10657000A09F4CD4FA11C2F369407C07496FE5CC67
-:106580006FD81563CFC3F162B2FC407FD78BD6AC16
-:106590000560EFF94427251F3267E11D7642E9AC1B
-:1065A000AB75C04DD3E8F7B9EF88A06E53F4B8A42B
-:1065B000744A37B3391D9F22DEE7C7D0F5CD6E652B
-:1065C0007AF89C65D1E9BE92D72FB5CE37827CA5EB
-:1065D0007AF431AD5FB4922C43BA2B5F15F1BDF55F
-:1065E000C7C81F9511FCE1E6F6C35E953FF2493E30
-:1065F000CA174298FDCBE5F2F562EE4DD3281EBADC
-:106600000E89C4A4803D2B92C5B0CECD821FFC055F
-:10661000C49B8C7C564B42280F553875001F0DEEDD
-:106620005D4E756CFF53E183402F3BFE90F7124D9A
-:106630003B767C3A680FE4777E9CF507D2B37ED137
-:10664000BEEF66C07ED6B5CF847EB1AE7DBFCE7ABA
-:1066500010F2BB4DE817EB5A6472011F78F7D9FCB2
-:106660005740795F663F34ECFD362F88FBEB23887B
-:10667000B75309CC7E39D7FAE7234212A47455A048
-:106680003FEC8B453EF2ECB6A0BDDEB5F7DB42B782
-:10669000F59FB79E5A2371233DDAC8B46D40BFF110
-:1066A000CC7FECD933EAE58574FC9AE6FDC6D9B413
-:1066B000BCE88DBFE681FCECDAC6F4A24E39B886A0
-:1066C0003809F92AA1EC7119FC7CC04C19843C9D55
-:1066D000B8F1066F6E34B83038745138C0BA285CDF
-:1066E000CA41EEF7068F984423D2FBBF1E3CCECEA4
-:1066F0006072ED0704FC4261B8082EF6DDE6370B48
-:10670000B87EF67DDFB7792077CE342D447DE55213
-:10671000EB1E92F8AF4A07FFD5750B81CB59F7C432
-:106720007F597C33FA7F2F41C17946F2414F3ADFDE
-:10673000F913CCBF6673E27C2F93FFCBFFB7E17DEB
-:106740001BC5BBFDD2787FEC7F2CDEDFE178B7394B
-:106750004C20CFF6FE15FDACEAFA2FB5EE57FE87BA
-:10676000AE5BD5E36F34D41D9E4AEB1F268115C561
-:10677000749E6F665EFFE1545AFAEB5EF4938F12DB
-:10678000991DF86B503EC0FE4B13FC1BD0AE6076DB
-:10679000531161FB7A514E19EA1B45394FA0DE4077
-:1067A000A4BAC3F9141E3766CD752EC5EAC33E716F
-:1067B000D3FC8FD2AF75A2FF30C27E3C2810974029
-:1067C000F5D8A22B6F380476CCF84C3960CAC3F4E4
-:1067D00028A46FDB27B2EF56BDDD3409EC1D8D1DFB
-:1067E0007883A22F9FC0FB9B48E61D9E4AC79F98B7
-:1067F000293AFCD06EAC4F82F54CA2CCEDD39C1F55
-:106800004D88E86F1BD531B5FEB5BF177EE624660F
-:1068100067FE9A8E9F0FF0CB94D17F7849F801BC28
-:10682000115EF9FEA5A05B494E84DF8D19351C9ED3
-:10683000CCAE96787BC9BAB80DF85622D42E667ABB
-:1068400019DAD3AA5DDC1B9C09B7B3253EA40A77ED
-:106850002993DAD9FAFE101E2A3EFE5E3CA8F8FB08
-:1068600047F1F17BC0C788303E32CF3B24E0CF22D6
-:106870006E0F8C3FDF26623ED329E1F90BB707C6C6
-:106880005AE325B007AE953E10812FCBCCBB2AE151
-:106890001CC1EC1490AE077718D0DE31170808F74A
-:1068A0009C4609F31F181C2340D19E72CDCE330F96
-:1068B00010F027BB8C4CF12E66FEFCBF7CFFFD98D0
-:1068C00042F0ABB0BF32FABFC914BE735691400C50
-:1068D0005DE75C897821C4612E5DD4319D3F589F6E
-:1068E00087BFEB52C2FD5CAA7E6F72E49F9DEEA44F
-:1068F00072EBD81584EC829439FB25ADDDFC835610
-:10690000062FCF61E2EF8F72C125166BCED9FE2D17
-:1069100089C98F9D7FDC361CFC6763BB72E3983CA2
-:106920002D30005D7AB85D708E287110AF70AE7535
-:10693000401C9E231E126DEE287E9B4DDC9EFE6544
-:106940003D3A9549D77AE213C16E2221F4DF7AD716
-:106950009BA39E07CF4A3270BAE178A37F62219C45
-:106960005BB0F1E7D2A6715ABC754CFA42CAEB890A
-:1069700007F83BA6395FF947E10BF63BC077932553
-:1069800038A1388AFC98CFE137E5C077E8EFBCB290
-:1069900075AD01E8F7CAF506DDF9647512B7BB8677
-:1069A000916130AF29072CB602C0CB21D169A1EB90
-:1069B000F3B49E35BAA39C7345C213FA073FFAABF2
-:1069C00049EC5C608FDC341BE0BAE74B33F152FCDE
-:1069D000EE32FAAAA2CD332985C9B9B9A4E9BEBC61
-:1069E000EC7F3DF88EEDB206C6819DB99E70BF4624
-:1069F00024FD11A4E3731B891FF653B04B412E9C59
-:106A0000DB4C703FA7207912EC6ACAEF3FD4FA69D9
-:106A100006B76CFD25E801B5AD82C340CB6BA5A0E0
-:106A200011FCB19E967811F6DD7C85B8F07C587229
-:106A30000CBD55C317AF264908DF83A3F7DC05E378
-:106A40007ED56124A08FB8DE0CD961DFFEAA75382F
-:106A5000F2416FEBFA553DA91C2F433F4C1E46D225
-:106A600043EEE6185DFE1AD19D01FC35C5149CEF7E
-:106A70008C82BF49C98CCE2E5BBEF9FF3F936F1F3E
-:106A8000AAF2CD2D166BF8282999D1BD46BEA54690
-:106A9000936FF3042515E03E6FEF8054C0EBBC7795
-:106AA000E4E468F26D4B3D3BFF7B9DF223A45DCD9A
-:106AB00054BE5DAD916FCD54BE65F76CF7B7CB9505
-:106AC0006FFEFF1EFEDB02F22DCA7AE339FC54F999
-:106AD00096D77A14E55B5EB381281ABF9339F952D1
-:106AE000F24D48BE15F4E143B233360AFD6CE1FACB
-:106AF000F7EB3C6E0FC60139F7A364765E7AB97284
-:106B00002E3D85F1C925E5DC7F139C5539376F3B58
-:106B10009573D9D1E890C9B979BBA89C13801E9907
-:106B20009C9BB79730FF5B847CCBE921DF08D6AF15
-:106B30000DB0F69E96EC17EEA6FD0D73C94E33AD63
-:106B40003F2C2CEF4668E5DD8F922584730F797713
-:106B5000E8F2E4DD762EEFA81CEB0FF235923E9CB6
-:106B6000AD31BAFC9E51ED9B7F05FCF2AE88E78B00
-:106B70001F18D839D07BA3DA0B80BE56F2F97838CB
-:106B8000FD75D67BB1FFA237D9FA6A3633FF776D30
-:106B900033D30F6BD78B7E85FE73C2E8EF8C30FF4B
-:106BA0008ABD0249A5F9A926DFF35690C1BF900915
-:106BB0003B172393F235F430676415FAF11B2CF67A
-:106BC0007584F2F11C8998C15F5F659DF005F8E955
-:106BD000AB4632FF7E15FF4E78DC801A0759DA7219
-:106BE000EFDB7D48CFF881292686C7292F0BFEB51C
-:106BF000D910BFA42FAF8A887F7C8AAF73AA1844AC
-:106C0000B890F7C5A8710C4F45C2E31087075DBF68
-:106C10000E1E7E212A3C284627E5A784D75FF16E09
-:106C20007031F8F32B560A78EEABC223729D2A7CA2
-:106C300054FF74156FEF69BD17CFFD23D7AFC2AFF7
-:106C4000C7BA557846ACDF97CCCFBDF2C97088A7DC
-:106C5000A1F480F2C3FB1B0A073A4EF1D82B52B5C0
-:106C6000F2F8790E87E1BEB145E904E046EA807E9C
-:106C70004A1BEF7D3B9DAE7FC427CA30D826AF1993
-:106C80006D72C339EA264B08E59B4A5FED2ABDF3D6
-:106C90007EF664D48D437BBD4570807EE10958103B
-:106CA0008E1E4A67165AE5E0CA6F2670383A4CC8FD
-:106CB000577CDFA17037D0FA13D47D88C21DF866E7
-:106CC00078EB593CCF2D20213C2FA96D149C01BAA3
-:106CD0008EDA16062F55DED23FAB161F51E8518AC9
-:106CE000468F049CC485E17DB08AD79B62F27D0407
-:106CF000E7305328BDAF25613CE6D0FF008F917887
-:106D000052E17929FAFC9CEB1F5B008E5680578874
-:106D1000E95101BA2FD8C2E51EC9AB8363D18B17E5
-:106D2000187DED1514384FE88613D02B2D1FD1CACE
-:106D3000E815E0A600DC5B4B44C89752F82666F7DE
-:106D40005C279C5F6AF9B762EF51D6FF6AC149A21E
-:106D5000D0AFBAEEDEE8F71FA5DBF608BA7DCF129A
-:106D60003A3C1CE876AFC0FC08ADF1BA7347530A51
-:106D70003B77DF64A1F40DE75DEFC8CE754A4F3E67
-:106D8000BFC0E109FABFA2F14B0D8105C059E04631
-:106D900033C69FE13CFA33FD522B5FB75848F2AD42
-:106DA00005BDF76FE4F6406FFA8D9A1F0AE381DCA8
-:106DB0006BA1E3E584C78B94EFAABD7FA97525A6D7
-:106DC000FC63EBEA8EDF246D78FE648A773F98845B
-:106DD000FE1F169F743B8F4FA233403D4B532F2D08
-:106DE0007944EFF5489A19F7E1FB785CFCF5A29538
-:106DF00078E93ABE72C948A77497FEDD1890CBE3D4
-:106E0000E83E4293AF0E8FF8F86E2C17F13CEAA6DD
-:106E100077136BE09CEE261046F4FB4DF902EEBFB3
-:106E20001F4067A3408F3513978993302D1FF98337
-:106E300078F41BE5AFF71529949F866DF43740EA87
-:106E40002C0A25BD07F01B2B12805F9B2BB108F687
-:106E5000AFFB3E27F9A282FB2CF633EC1049867A71
-:106E6000A35DC9680E8C6A5E5104FED1A907AD56B8
-:106E7000A0F39C5506E2D6D0EF68E26F8073F8511C
-:106E8000275CB700FF95537D01FCCEE5AD6B1BEC95
-:106E9000905F253815DABFC7EB9E60A7F3DAD2788A
-:106EA00076C255C087B41E74E359C5EA79D60B4E35
-:106EB00008952D6D5D8EF138A5EB05E280FA7E8197
-:106EC0009859BF7E33ED77CB2ADA9EE6CBA03DF40E
-:106ED000BBFEEC87B7009F1F1659FBCDECDCBA94C4
-:106EE000B653805ED7DF8BFD55AC12481AEDAF7CF0
-:106EF0003393FFE58765279437EF5F89FBD8243A02
-:106F00005E7A36C8FBC078C893E18203FD9D99770D
-:106F1000225F7771BE261DD398DC10789EDB0DAA08
-:106F2000DE742085C507973A171A13693FEF8D4C19
-:106F3000CE8630014FCB593C8F3E41E1ECA670FE2E
-:106F400080C7731C1C79DC18D4EC3F9FA50C403A19
-:106F50009CD33216E31CE692628C7398328AE96BFA
-:106F6000EF5F6BF10B745EEFCBA14CF87EF05A1320
-:106F7000EABF9D5B643C2FEEEC1B44FF74FB2A9937
-:106F800040BC46C32A11E562FB66B68F8BAB6F9B94
-:106F9000900EF0DB2038416E1E5C5564847DADDDC3
-:106FA0002F60FBA2D5F7A7303B86C943D56E2B7562
-:106FB00054E8F68F48F9A6CABF1A0E87483957A376
-:106FC000EE331172AE06CE9BED90EABF7B8895C979
-:106FD0003FD0FB01EF81EF907E6B0FCB04F47EE19D
-:106FE00078C7048CDB827D93968F6A155C70CE5FC8
-:106FF000FE89C98FFAAABF64E64F417E7F6A22826A
-:107000000271F014EE542E8C3485FEF82CFDFEC572
-:1070100007668890A17452827056E3450B36B0F82B
-:1070200096820F56A494021CC627A29C2D6B14892D
-:107030005B232FBE105CB7DCC9E4B16383461E1529
-:10704000187DA5B07F3952991C5436C8103342B60A
-:1070500073F944F56917E80D15BB96A71869BDC506
-:107060003C1EA462EFF2142A1A4803EC5BB47E853E
-:1070700091F55FB14F70ACD5F4AFB657FB53FB3110
-:10708000EED2F733602FCF5F663FEA3CD4F17BD37B
-:10709000C747FEC7851502ED6FE4FB2206298F3C2A
-:1070A0003E6980F6BC434D55FF6BE18706E2D2C0D6
-:1070B0006DE41F63884B4317CD23287F53BC4D6E6F
-:1070C00061FA50F388A3C69A02CC3B809F6BB99FAC
-:1070D000B6763C3BB76ACEFFE011E0EF490502D23D
-:1070E00001F1BA8D8949A8072970BE5056C0DA97B8
-:1070F000D1F6C077CD2B191F5279A080BCA85DB501
-:107100007C02D65F2F28D07FF3DA12DCE7CB478AE8
-:1071100004CBD71F45BDA3BCE56812F02BE5CF1506
-:10712000B0EFD68E3139803F54BE53F9F87D99C502
-:107130008710B36328DC03284B51A2F2AF78983054
-:107140003B75B38C7CE719C9F8F2FD2D22F2F3C12F
-:107150006BEF98007CD8B941E8858F299F1684F998
-:10716000545CCDE275CA36317BE5E02A261FDA9BF6
-:10717000999E58B45A9E0CF9B27765C2FC5E4C1FBA
-:10718000BC5C7EEEA1A76C8CCECFBDF1EF14B9E94B
-:10719000A3FBE8FC6E7A8DCE5F09C3ABE8BA07ECBF
-:1071A000E8A7BF6E3AAE579543A5128B679AE35B8B
-:1071B000C8E27D2516F7F677CF2B621E8FA5D8C2C1
-:1071C0007244047A8F6771D2EB65A4F7487EFC475E
-:1071D000F9E89FC5D7DB391DA9F311F7B2F61057AF
-:1071E00016A070FCF5E69731AEF5CB578F4E013CFB
-:1071F00057EDA1F44BD7DBB9D9460220B7243FEEB7
-:107200003795CD22C68F132950788B4DCB9F2C3EBE
-:10721000A9EA751BD24DE53616775AB9E3781EC632
-:107220008B2C0A61DC95F755AE6F7A837940DF9538
-:10723000128B938AE4F7B1A94CFFECD8153B0DD61D
-:10724000216CDC8FE7AD954D77C8407FDDF223558B
-:1072500056EBE139A697D22F9CB3C3FCA60ED5CE30
-:107260006F21E2A96313E3FFCA16D96F81F96D5C40
-:107270008BFE6CCFC6B3181F5FF4FA16F423785A4E
-:10728000447D5CE44611CFB3688AE75691F189B535
-:10729000CD3578EE56DBC4E3FF22E2E2AA5EDFBB27
-:1072A000C34B4153F5AB5FD8411E9C6EDB60077842
-:1072B000D2FE30AEF0BAF3922E3EAAF77860973E37
-:1072C000DEB0E9711E6F38B99DE4F58C373C0DFFD7
-:1072D00080FD2635225E7363228FEF0E141647F170
-:1072E000E777DFFBD9F2F51A8893EFD876660DCCF5
-:1072F000BFFA6F5FAD81F826B2CF82FB94E7D5DF8E
-:10730000615CB1DA6E612AA3B7CE4DBFC0B8ECCED6
-:107310004F4D68EF74EE6DCF82F8B6CEADDFA5802D
-:107320007F6EFEDEEBD17F397F7B512A8922EFD53C
-:1073300014E8D37F1971E191F838D87C10E3B0BE1E
-:10734000FCC484F2AD3B7EB4A986C5E52A3C6E74CC
-:1073500073F4387C35CEB1B6F9969BAE0579DDCCA9
-:10736000F4BBEEB8C74BC58B7E48F17AF565E06F8C
-:10737000338F0B6E9A1C355EF44BF807C5D3CF5391
-:10738000F5F1A25F37CFFDF98B50D69CD86BBC6866
-:10739000E032E0A6C6F957A7BA5E4D053EDA16EB15
-:1073A0004D6378F34F12400FFC3A0BEE479C92432B
-:1073B000180712DA6B7240DC63E5DE8F915F3AB733
-:1073C0007F80FE56C2E3EC3B49F71F8B8716F83AE5
-:1073D000D7DB589C29873FC4A12A76FCCEE34D1900
-:1073E0001DAB71A8BDC59F0653F9FD617EEFA08658
-:1073F000DA4D2C4E3D1C972A8C047C1DD5C5F5AA70
-:10740000EB8EECCFC1E56838AE3A7A9CAF1A47D81C
-:10741000135F6C5F51E3A63BD7F2786BFA3D7318AC
-:10742000C4C9B1FDDCE3173E8E865F35AEFA0F119D
-:10743000F855D7D71B5FA8FC79A979FF57E1F26E01
-:107440002AF367ABF0E9F84B7439FD0DE7776AB7BB
-:107450007E9DAAB16F6772BB55859B3ADFC54D4CC7
-:10746000AFE8D8C8EC8748FEA6EB71458BB397D23E
-:1074700098FE5BDBB23F0FE450C7815D9CEE185D68
-:10748000D76E3ECAE274A9DCF66BE536617EE4C8CD
-:10749000FEECBC3F4F6BF4FE3C9BCF46EDEFB4E4FB
-:1074A000BA03E67FBA8DE951A79BC489FE28FD5F28
-:1074B000E0FB52F7BA6D468C9712ED31A84FCDB76D
-:1074C0008DFC242E095223C6FD342CE471420F3B5F
-:1074D000D300CE0DB61B09CCE751808FC6FF203BF1
-:1074E000DC04F43839ADB84054C2F355CB8D4906AD
-:1074F000E2D7E25F0A64827C3F92DF2E437F9F45A2
-:10750000F84D3E93C8E2543AAFCFBC8273A1D2BBD0
-:10751000DEADE6DD0F893A3F47AD297404F477F21A
-:107520008605FDD6E23E8B17FD666B2CB8CE83DB5D
-:10753000BF7D05E0D5F9731361E7089430A85C2896
-:10754000E3FE8BF6EDDFAEF933E899D0988E5FB6A7
-:1075500086D607FD7A732CDA035DDBE2F2509F7C5E
-:10756000E3C1292037CA600F033DEFF5547F03EDD7
-:10757000EF6432CB9FDCD217EF13546DB361BCE1E3
-:10758000C1ED3B6B41FE77BE1E0BC7D1E44B39F812
-:1075900037C87BF6C491B50AEA818A76BFAD2092DE
-:1075A000A2D5F3AA20AF8B7F2168A7A33F8ED27309
-:1075B000554B1CDE1FD1D4E3FCECCD60F7650219FE
-:1075C000C077549FD48DA396DF9AD69FDFEF0DFD31
-:1075D00084BDAFC0EA7B8CA15296F76530BE6DC307
-:1075E000FA252ABDF2F29EFDB2FA33D3FAEBEAA9EC
-:1075F000ED6B4DA42E1A1F54A709FC7EEF5F0747C1
-:107600007BCF22CAFCF1FBFD02F11A400FD86AC100
-:1076100038AE6A636010C4B7EF30B2F3916A7B6032
-:1076200010C4B7EFE1F2AF3A86E6E9F70C3E0FA8D7
-:107630000F79620EBE06F8AED969214BC17E7FC3B9
-:10764000E6023CD7ECF8F6E44B0510CF168B7EAB88
-:107650009A37FE0DF15F630ACC00FA0F6D35917514
-:10766000B47EC7D677B2408FE8900359091739F72F
-:10767000A96932E9CEB1D5759CAEF70F84FBEBEA70
-:10768000BDC5CA5EE4C5DE34A68F2E4F733D9D8610
-:107690007C6D75A0BC86FE44E8A76580F65E73A588
-:1076A000125D8EAD4A9375F768C5F03DC555D0EFB4
-:1076B0009724B83883A2A44608E1F979E5C6B34314
-:1076C000C11EFEEC6757E1B9D667C6D05090DB9F6C
-:1076D0006585866AE5F1A97AB322C9E897C0B46BDB
-:1076E000EDD9D20C02F1839669D1E4D396B4589CBB
-:1076F00047E543B151EF83EEE6F4B61A6830998D51
-:107700000B7E0875DCCF8C7E23CC23375DC1F2CA9B
-:107710004CBF11BE576DDC3540F7EE84E4C37A945C
-:10772000BF101E156485B1C0DA53AE542CB02A12B6
-:10773000DE8F96FEB39BDEC4309ED0C909716A1CF1
-:10774000877467423FA87A1F40928BCD002F232970
-:10775000764822A0DA877C1A439A30B5527584EDB8
-:10776000437504E28A4EF1F35B93A43C0DF2C374BB
-:107770004844797E29B8FD3ACD8EF3364975C489DF
-:107780007AC72407E8D582D74DBEA7F4D050BF7181
-:10779000C00976FEEF8278380C8DA3F3B33BDEFE92
-:1077A0000EF4034A6768677BAF23FE063A9E646463
-:1077B00079328EF8A39DC777703C10EF7E943F56C8
-:1077C00012FE0BD17C2C4A283A6EDCDF46829D6B80
-:1077D000759000E84DB1561288A5A935573AADE528
-:1077E0005F3B61F9FE949C41AE39C6E8CB23E99A30
-:1077F00038A5F3DD7251C4F6E723DA9FBF587B1535
-:107800001E1EF3806C76FF9DC12586AFC13BCE79ED
-:107810002108F0C8B33B1B008FC6D09107011E7929
-:10782000566627263512AD1D37209DC9AB4704B6D5
-:107830005FD2BF62ABA63FE230A3FFF4710EF7EE5A
-:10784000FAAA5FA5477D8B0470ED51DFD25BFD98EE
-:10785000E8F56DBDCD2736FA7CE27BE9DF1BBD7E06
-:10786000ED1B1FBF1750E023931B1231A8F7A00791
-:10787000A483BD157724A58451053B2788C05B0CE4
-:10788000D01FA58798819AEFF07FB91AFCF58F82F7
-:107890007F1240BA2BE1F3A1796B3A9DDF9D7CBA50
-:1078A000E3D7B373CCBBE7333FD29D0FB1FB424765
-:1078B0007FC6EEEDDFDDC8ECEDBB17B0733352CE03
-:1078C000EE0139E87F30DE3DD009C5F73D3EC11FEE
-:1078D000C886777022F4D7EEF776EE97A07E4984BB
-:1078E0003F46A527F5DED26CAE5F6773FA9C4B422C
-:1078F00036E0FBC87BF4CD692C2E8D9A632E58DFC1
-:107900005D7C7DEA3EE05D4E72E05D00D110E38477
-:10791000F31191DF5B257623BBB77A6B824EFE9C19
-:10792000CB51E260BF236FF2EFFC3DA2793728A96B
-:10793000DA7B5ED285587C7FA44176A6815C942F49
-:10794000FC9828942F8C17061045730F8DEA77C882
-:10795000ECB283A01F4772149332D00BE3399D25FC
-:10796000DDD8AD87BD4FE1326FB982F760EF486770
-:10797000FBCBD28CE2B94017A27DA4D36DED895721
-:10798000EF76B6BE06585F76CF7937189D4ED44352
-:107990006FA41A04FA7B9C66988F68523E56803F0B
-:1079A0007F2B13B0FF7BC281E1F35C52821FE25F49
-:1079B000E6D8971E01BA5D56EFC073B425F5399825
-:1079C0002EAD4F433D7471BD1353152E66A7CF25C1
-:1079D00052389B07B2FECC0E37D333E83E04F11782
-:1079E00092A32E007973661D01FDD7D20D1F1FC211
-:1079F000C7D89D7763DE04799ACA8D9310BEB43DD3
-:107A000029033F6A867B19C0C7A25C49140D5D98A3
-:107A1000D286E9F23DE0A6D2C71606BF2705461F6B
-:107A200091F07B526E53E0FCF9C91BBADFB541F807
-:107A300051759FC1EF37EC7CAE57F83912509F9DBE
-:107A400053B8784603FDF4043F877CAC7E24C2EB38
-:107A50007188EB1A0CF6810B5311E047E9C894EBDF
-:107A600025226D6F52D89C4DD66297A180D12EC031
-:107A70004FB432789AD2EAF03CCE6C65F012AD5E2B
-:107A8000848B6C65F012AD8CDE8C3C2F01FC866320
-:107A90007BFC4EE1D79C3E02F0305A072F63D2B8F0
-:107AA000CB83DF4A0A3F3A8F24CE5F917048827BB6
-:107AB0000AB961BEEA4DAF7B8EAE1FF6F117287C86
-:107AC000204DEEC57E4CCE607234C950B75F06784B
-:107AD0002410BEBF7849662161A18AF097E6250A85
-:107AE000E405360FB25E8F57D12145BCFBA6BC0022
-:107AF00074B0E21DD900E7A4E2821FEBEE938AD3B3
-:107B00005CF10AC2D32DC0FEFC44BD82F85B0E7846
-:107B10001C0CFB23B3C71EE5F87C0CF804F1CBF872
-:107B2000E349CE2F4F733E6970B2FB13CB26B2B838
-:107B3000ACA47C037F0F2D40B4714FF1CE2662A41C
-:107B4000F3421D5BC134807AC62726FF15B45D6CF5
-:107B50002E71019DC47FF2801FD74A8AD3412F8A9C
-:107B6000E7FA2F19A3C44FC78BB40189D921541444
-:107B7000A25DD36688F60E5683F38019FCA6BDCDB0
-:107B800067FFD41D4897A5576378304974174F9FF6
-:107B90004BF3D6C658F40FC63ADD858F029F37DA0D
-:107BA000904EAD74FE651ABCC7F682D717336E309F
-:107BB00064503A144169A3F87DA6718005E0FC9CED
-:107BC0005C9C0EF2F539BECF521C28DA73A80E2E3B
-:107BD00027ED0557EAECD915B20BDB39C6E8E5C04D
-:107BE0000A2E7713C6EBE95D95BB1F75CB5D773227
-:107BF000CC27E5C278E4C7A49BA3CBDF06D9E885F0
-:107C000077051A86327EF79618D97D989EF200FD88
-:107C1000DAE7DC83D6813C55E96B1161F2C74B6230
-:107C20009CB81FF1777454FD7809BC37C8E52CA4C3
-:107C3000E24023D24DCADD068CCF5BC6DFCB7A8A09
-:107C4000D217A43E4A5F905E9BC1CE33169987E15E
-:107C5000BB6D0D5603CA0BE95393DF0AFAEAFE51D6
-:107C60000EF02348B2B3CD05FE409BD4B48E40BD88
-:107C70000233BC2721C41738800EBEB1CDE977B1DD
-:107C8000383C8A4E01E8C891544C8EE5E2E901DEA9
-:107C90007B911D3713F02BBE90546701B8E5663019
-:107CA000BBABB1A410E148E13B2E2339DC4FEAB471
-:107CB0001BBBDFDB826E5FE8E5FECC940CAE476752
-:107CC0007AC9400DBF370A5C0F53BC2447C3F78BFA
-:107CD000AE9840E05CA927BFF722CF363079F6880E
-:107CE000105D9EA9FAA72ACFE40839A1A68BFB4D07
-:107CF000D4DDEF322639817621F51A288A24EFD592
-:107D00004FDE158F70980D7020693776DBB53FEC2C
-:107D10000F7A6561547A8B946373BAF775570AE0EA
-:107D2000E994ACA44E077A7AA7B77DDD558A74E84A
-:107D3000EBA3C0BEB4FF991FA35FE7C4333605E4CD
-:107D400050D985C7717F28BD300AD3F2C61B703F5A
-:107D5000179E9D5C08F4D0BEEAFABC4FC1CFE3B3D6
-:107D6000E1BEDDDE583408CF237DB10AC477B437D5
-:107D7000D2F2827039C48B8B9A780102DE77CDFD06
-:107D80006F52A0A05EAABE7B46ED3AFB68F00BAD39
-:107D900016F15E58E9B33617E89FBDD15FE9AAE84E
-:107DA000FE00D86BC1EF4A07CC013D7ABF7D742835
-:107DB00040FB9DB38E9D2334185D2703A0373D63A0
-:107DC000C173C88684E8EF82CCCDB87E19C881B96A
-:107DD00019AEE7104F56F64E69EFFCC0C63F098753
-:107DE000CC708EF5227F1F4572DBA7EACED9D83939
-:107DF000D649EE6721E65ECA6378B9D24BB99DC514
-:107E00008B1047F472D5CE880DDB194DB08E9AC613
-:107E1000338B3F4578713B83CFFB94CCE67DEA15ED
-:107E2000937F5114FA3FC5E3532A04065F950F4E22
-:107E300075EB476E7C0F27924E8575435E1845FBA8
-:107E4000FDEA908CFB4635A52FA4AB75A3303E5EB2
-:107E50007866D4D310377CFEB088E595172C58DEB1
-:107E6000F1B0F305887B0ABD2B13904FE70F5D1F20
-:107E7000C7FC447A3FF63D7D985C38C6E543E9850A
-:107E800027907EBBE9C437D708FC577AE12946DF43
-:107E90001B057CB79278ABDF1D3B90D3E768685F2A
-:107EA000317911C07B8C0FCF49CA36989CA00F4402
-:107EB000E2F95886A2F37B94059761BF84EA5F4993
-:107EC0009AF3F4533CCEB8EC027BAF9038BC240D4F
-:107ED000F881CBA7301DEBDFA1EDB044F7D39FE3D2
-:107EE000FA4FE9856B747646787DD7E1F752BEFF8D
-:107EF000970547613EBC9E1746455B4F781D63B0B2
-:107F00007E477CF4F1D3399C4FD6971317956FE5D4
-:107F10004656AFD477BF11E44EE9AAF80441B3AE98
-:107F2000B2C62A5D9C47D9AA12E32C4DBF613C2CF6
-:107F30007E77AC14C643FA4B0B272FB2825E502CCF
-:107F4000F7017E5A5751F85305FA63F2E90BD997B6
-:107F500005F2BABDF13E7BB47B13E97D22F0D3C8B4
-:107F6000F143F5EA020D7E54BC44B63FB9B6ACF01D
-:107F7000A7E08F5EC95E21E95DFE44E02D3B3ADC5F
-:107F80008675C32D07E38D2E0DB7AB7471453DE0AB
-:107F9000C6F1ABC245FD4EF5A8ABFA8C80F108BB2B
-:107FA000BFD3C8F07F297885C7E5F81F1B7D1DD397
-:107FB000BAD7B1807829A3CEB9E43A1E245EF3453E
-:107FC000D6A1E29FBCA2C3FFB497D6221FAAF89EF7
-:107FD000736025D2EF1CCA8F70DEDFEEBBDF1E2D73
-:107FE000BE685A6F781FE825B985FFF7F0FE85EC6B
-:107FF000CD82B832EF720BDA23A7D63D91A585F377
-:10800000DC8CB1F7005EC8FAE4CBDA3FBCE39C87B6
-:10801000C0BEF43E23A33F6D6B86BB0CDA97733B67
-:10802000FC91F80983A2E9078FD61F1A027EBA864F
-:10803000FA364C65AE5F12D02FB3515F72457BDFCD
-:108040006B491F26571EAD6F637E4FB39738B4F749
-:108050008909D39FFE93307F8DDACE28BB1DE03F88
-:10806000350AA418F53EC9BD24BB00FC1E49F95EC3
-:108070000DFC16F761F79196A51D70C0BD6213ED5A
-:108080001FFC39E64CE99CFE9C93E5F3854F45883F
-:108090006F96939A08FA4373E9770DBC8D496D3A50
-:1080A000FF74241C24B31DCF9B24C2F43975FDF446
-:1080B0000BEE4B8FF17D6905F76B3E5FDF847EFF32
-:1080C00045B176DCFF16F733307BCA2CE17B35A651
-:1080D0007856DF18C7E66D01BFB708FB6A00F336B4
-:1080E00078D147C4A7D104C8C71345807C22092C86
-:1080F000C67752C6067F02DF9D696E3FE0F19BF4B2
-:10810000B62302F8B18BDD8361FF6D14BDF90AADB2
-:10811000FF7331940FF5B268D127092CED07F1D028
-:108120006ECDB9167B2754D1FA0523F3FD164811FD
-:10813000E73D7F19AC2D5F9EE67A1DE6D16061EFC9
-:108140000C251D17F03CA7C1C2DE1B6AB0DD1E075F
-:10815000FBF86FFA30BD1DE900E8E810D367CE499F
-:108160004A5C02F3932A6FEAFCFC66E54DCD3812B7
-:10817000B7F7D653BA9434E72A03259701E8E60AFD
-:108180001FFDAE9D67147F5C82159FE58D7A9EA3CF
-:10819000CE0FE2F6018EE2850968AF45D2C39E6E2E
-:1081A0003FB357047C4E57DF2F961E61F978A2FE2D
-:1081B000A1FDF569B73EFA08CBF3734ECF2C768E4E
-:1081C000D9501287F171EA3CA6B73ED6067AEAF496
-:1081D000D6F4D970BE35DD3AE87348F7C8A103B1CB
-:1081E000A007DE2FE0BD923B7FF7A61C4BD3ED1F0F
-:1081F000AEC3FBCC9F73793A8384F05D783771F01E
-:1082000073763F7E9F459C3CDF24835D7F77C07FF4
-:10821000DB649ABBE74DFF6450DB661C0ABD056258
-:10822000C0DDE4988067086ABB16E7DB2CCFDA75FF
-:10823000AF5F32E37AC2EB35E3FAD5F5D19922FC90
-:10824000BBE1C3DF6B52E121CEA2EBA6F4323DEEDF
-:10825000F61BC945F4F2E9D69CCFD9A1099B4F245E
-:108260007CCE4311D51F3BFAB84826C5DF1FFAB8AC
-:108270000448ABCDA12CA93FF2890CF95AD1DD0FEE
-:10828000429FBFECEB1E9C0C70684BBC2CF979C470
-:10829000C2F8FF08D033C4795D48C275A9EFD01F7A
-:1082A0007CA0DD067AE7E2ED1FE33BCB3562F0C947
-:1082B0003BD01F2AA2DD74AE79F045EF9F1D013F30
-:1082C00015DDFFFA66AAF72CD93A674A8C4F663655
-:1082D000C7623CFECC05A2EE1DE9990B583C1F91EC
-:1082E000DAF26ED5E9EB8FF4DA0FF80B22FB99BDC9
-:1082F000A0881C1F0EE7B48EB1E83F58C3E86BF6A8
-:10830000789708F1CEA3970878DE3AEA84D212A4CF
-:10831000F9D9FE7827B0E7EC07FE6300BC7350DBA9
-:10832000C6FC81A9E2BDF90F839FE500DBC7217F71
-:108330002FD089D5A55835E7051D725D3EBCF7E7FE
-:10834000BDC7EA02FE2FB9D5F529BE17C1FD15EA52
-:10835000BEBAB3B104E3644BEE564602FE4B9A2C10
-:108360002E4CCD448AA172AC44226648538D44B24F
-:10837000401A43CC90162E62EF7697364E45FDC0DC
-:108380003EB2D808EFF196B4FEE26B685F2605F6C0
-:108390000B7961F894B4BEF31DE075AEAB18E31928
-:1083A000AFDA68D4D981439BF4F9AB5BF4F9FC8074
-:1083B0003E3FFC903EBF2193201DCD32DF920BF05B
-:1083C0003AB0D744F72288FF3361BCCB3181E1C793
-:1083D000BBC982F2B0A8AAB510ECE033AFD90C60EB
-:1083E00047EFF9EBAFF03C3CB42596409CD5FEDF5F
-:1083F000C7901888577CDDB20ECAAB28EEC07F59F3
-:10840000F5BA652DD8E13BAE54ED787F1EAC67C759
-:10841000DF587C4D6893C90FE7E36776FDE2353896
-:108420004F3BB3A90FEA57C704AF2106C6FF82F935
-:108430003F83FCBDB8207F2FAE6AA3DE2E9E97C976
-:10844000E44C70D13571D1F42635CD494BCC1D4F5C
-:10845000E7D6F5B86926F8810637EAE1A2D61BE22D
-:10846000D77F7F90F73F9A18C3749A0D7102FE066A
-:108470003BECBF2F477F277911E79F575FED6E27B2
-:10848000F277E288A2B9371596DF647E1F88DF0095
-:10849000F8F70F7FAF229AF968F49389BCFFAFCC4D
-:1084A0002C9E3989BFDF7FBAFE10EEFBDD7A5FBDFF
-:1084B000CB355E932F6DDC9F5202F6D3AAFD29B314
-:1084C00034F0AADE7430E52E8C7B92C0834BAAA7D1
-:1084D000BFF214F82BAA37894D304F2807B87534EE
-:1084E000BD65877A541F1E067E90B03E7ABD6BBC78
-:1084F000868FFF5EBA55F9AD9AEB2F3B47B64D809C
-:1085000038F5AA46C109D5AA9A6EBB6532C07B155B
-:10851000BBE75A28916291F257F5D6DB7E3C14E214
-:1085200066568F70C27C6817B7C2F7AACD67F13E56
-:10853000C3D288DF3D50D3DD994C2FA4F503065AF2
-:108540007FE9EDD672905FB4DF37217F20671DBED3
-:10855000AF623FC5CE1FE8F74F0C546F3935CEFBE5
-:10856000DE5DB4E919D2F4D164F02B35EAE991D299
-:10857000B7007A596883E05C875F1715DE0C2AB76D
-:108580006B21C6FBD2F299D1EE5B57F8F5FD44E2C0
-:10859000FD233E5FFA97A3A59FC87A8993BC184F25
-:1085A0005EBD80CA438D9FA0FA840FDF978C1C8725
-:1085B00068E99AE913440179B8C5A2BE7F24980BF3
-:1085C000799CEE0096C77715814E29A1545D49C666
-:1085D0002B00EF9BC9444847835C81F7F44736E59D
-:1085E00041FDDD42F09597B03F1BCAF10E4700DF19
-:1085F00099CCE0F74C3B1496EFE27E4EB5BCB2D579
-:1086000082713667BE34A29C5DD87410E3E83B5E8D
-:10861000B3180C541E9CD99A380EE2313B9AD83BC1
-:10862000C5A79B12C7192FB26F47CA0D753F3D0AE8
-:10863000FFA4FBEE9F335DDF64C23EF5088B574D10
-:108640004DACCB8FF6FB176ABB24635D3ED831A1DE
-:108650007BACCE7508276FB6847EF03427C40995AD
-:1086600008AC5F63BF62B12FAD6FA375C11F9D7072
-:1086700048C4DF6B382E3A7FE21880EFC9A31E345E
-:10868000A7C08DEF539247585CE56C8904244A6F6C
-:10869000B3613FCAC33CCAE5D9AB048C2B9BB34C36
-:1086A000BF1E782757BB8F56103F7BDF42EB47EC4E
-:1086B0000FF12E74BF81772DCD2CFEA272BDBE5D51
-:1086C0001509E07CAA377F6F8A06AFAF89BA2E57AB
-:1086D00026AC4BB8D98CF3BAEFB93876DE63242ECA
-:1086E000D84F43CFD950BE571137F67727DFD73D44
-:1086F0000F94B8E6801C5E30DB352711EEDBB2FD4F
-:108700000F4D3EE46F01F79DAAF124D097BDBB4108
-:10871000605FAD6A150243216F265EFB30F61DDEF9
-:108720001F80756BEFD794131F8E57BE4AFF9D7C39
-:10873000C8F05ACDEF3192F59AF2FEA09F317854ED
-:108740006F36E9FC3AA3370B5E1BDE77F537A4D012
-:10875000F9D59EA2B282409CEAF7265DFF10CF3386
-:1087600002F77D62A1787BAE5BAEFB87448BF33F63
-:10877000C2E1F8DC6DA5E9C0AF4F83DE9AC1013DCF
-:1087800012E516F71F9080998E1333BC3B8FE58559
-:108790008B587ECAEA57A6348EA1769EECC673A18A
-:1087A000D962F1DB701FECE57EEE9BFBD271661B9C
-:1087B0005C5912F2AD6B10FA43173038BC30AC6E16
-:1087C000485D143D50C5F3F3425300CE65BDBB98E0
-:1087D000FE652B08C9DAFDB5BA2F93477107827879
-:1087E0006F22B45DC07B962B85A3781F71E50D0ABF
-:1087F00001FB3E8DE209E4F14A813C2250B8143479
-:108800004FBDF72DC073418C137EEEA2A679AC58F4
-:1088100063C5F5333D2DB66E2D9CE7A4CECC19066D
-:10882000744ED73DF366FAFDDEBE0A8E976E65780C
-:108830004F5BE4CD86DF818A3B507CEF5BC0874392
-:1088400063F09E6C2A85952D01D325A07FA5918587
-:1088500002D47BCECEFA4F368833A7427E18CB2780
-:108860003C24B8D621F12DC7FE534D6422CC13BE53
-:10887000831E6906BF0296FB197E8BEAF2A1BFD464
-:10888000012C4D320632A19FC3DDF876A35D319FE6
-:10889000EF63F3B78E4D053BEF700735B8A9DC3AAF
-:1088A0009CA6EA43012BFE3ED4C01C569FDB85F3F9
-:1088B000F3D97D83A42C7DBD2ED915371CE4E807A0
-:1088C0004C8F3F6F75A17FFA1A63747FD64B7D99E9
-:1088D000DEE2B92010BF661FF04CFB06F54ACF055B
-:1088E00049F7BDA3DEAC8B73AE2E3F80F7EE6B482D
-:1088F0001BC661D734C5EAE276AF89893EAE4ADF4E
-:108900009E0B22F1461DD7A8FF7E21917813A3D597
-:108910004BD17FA7EBD0E55BBEED5E077C272383C1
-:1089200076B0072771BDB6CB6FF0CA5787F1D2E991
-:1089300008EAF69D4E85E5BBF8799C5AAEF6DF391C
-:10894000CDC8EF15B17795013EDEC184BCD87A164B
-:10895000FDD1D5ADFB27B0DFF76274A18593572316
-:108960003F521ADA0206CADBFFDEF7D453B94328B6
-:10897000891D50F9F8F4532ECAB729A241C7D7B1BF
-:1089800005DD7C8EE2E53983C8E5C299A7C68FD1A3
-:10899000E659FD70FB8E29E3A96E5F90CBDAFFB13B
-:1089A000EF97EF2D1A18964B741D59C5364DDE1CE6
-:1089B00091B7D2FC504DDE11519E14519E1691CFAD
-:1089C00064F53B6C812CD149487BDFB353A45170D3
-:1089D0008E1D98012F0A2C6BF86ACA789AAF296805
-:1089E000C3F899DA56C189C7FA6A7CBC93E959562B
-:1089F00067107FCF2EB6A0ED6D9003D52D8243A0DA
-:108A0000F46E6DDA8A7135D5D04ED1B46B6276676B
-:108A100075D3516CD76BFF3906E4E7A539C7B09E13
-:108A20007A7E7407E9FEBD8E0B202F6B9ADAD93E51
-:108A30001C717ED499EE3A88F230E2FEAB07FAB5AB
-:108A400086E95EADFF87A1ADBF836E62E79F5D28BB
-:108A5000D1FA7FAA691F01FA12BC710972FF79C1AC
-:108A60003F04F6E717897B08EC47F7D45CB1DF4099
-:108A7000EB1D9183ABE1A9864159969B242AA78FD0
-:108A8000D8827D052A4B72D624DE04F03C921CC4A9
-:108A9000171A7EB6268995F70DF68573D7DCAC1FBD
-:108AA000B2FC15C1D590BF75CD952C3F34D857A4D5
-:108AB000EDFB7BAFBA09E0BFC1119D6FFB66317959
-:108AC000AECEAF2CDF959605FA6635DB2FE0FAA522
-:108AD00099CAC51995A7B76CA07098F1D358945747
-:108AE0001B3A6EB9B118D7EF2D863837F6C43BDF85
-:108AF000CF502E4BA807A4C31E9610C6872DAB4D92
-:108B000041797F65DD56D8F75367E4A2BC3F9FE902
-:108B1000AACF1A114EBF1DC0D2FA2C76DF235534CE
-:108B200060BC41EA8336D4839EE6E749946F10BF68
-:108B3000568E8F61594CFE0DCB62765246DFEBEBC1
-:108B4000613D7772FD74C5E3FE4D160AFFDF0391A8
-:108B500024A17F1BF5DDBBD652B91107F114AE7409
-:108B600090077781FF37379C57F5F715F9346F0D6C
-:108B7000DB692BA6BAD2B571402BD6B27255DEACEA
-:108B8000C866EDD57D27B581C127F5E921EB601DCC
-:108B9000B112C1FB1773A70D5AB710F7EF9B71BE47
-:108BA000C4E54A07FBFB44457F03E8952A7E1ECBBC
-:108BB000774DC2F5882C5E5DC5933A7E3D5FF76CBC
-:108BC00091EEFF749D0FF673231CA93E90C7820B94
-:108BD000983E500F8ED8E4307C89141C01DFFF17BB
-:108BE000C1E95E58F73F0AA728F2E267306ECD026E
-:108BF0002A2F0C1A79C1E1F7BC1090530B34EF9770
-:108C0000D0EF6007DED1D7FD6896E61C67C68335D6
-:108C1000A8FFA9F38AFDB79D13EF203DF92C523F21
-:108C20003BF27BF332F4031A9B502E1EB991381796
-:108C300082FCE0E7B2AA7E59F8D3AAC360479DCB75
-:108C400012B19D45C5AB50BCB594C2E971BAADC275
-:108C50007D74EF5416DFA3EE9B2BF8BBBB2B1EB825
-:108C60000AE3FCBA48107F97CD3B92A0FCEB2E9F05
-:108C70003E08CB29BEBD16E0F78A18FCDD8115F948
-:108C800004EFD9AC987E2596EF51FD4AD3CD38CE6E
-:108C90008AA98C9E5654B0384CD847006EBDD1433B
-:108CA0004A03F36F10C995A78D077897E32FB62075
-:108CB000B8FD63D02B975950AF84BD13CF477CA923
-:108CC000381EC5EBF62CA46F368FD9CFA6FB97E2E2
-:108CD000B84EB4CF1FB3B94A505E3D1CABC0FC5771
-:108CE00059C812F3303047C82328F7F87C88EF05BD
-:108CF0008CF398C9F5B5CFCACFD9401F7893CB1B59
-:108D00002018B0976711563EEBA1D8A360DFCC7A4C
-:108D100048C4FB8564C9F52EFD79079D6B0AF8C729
-:108D2000F95F63C8067070433B3BF4FF9F3678CF12
-:108D3000C4FD10BBDF4BBCB4BD261EFA63E05FF080
-:108D4000B38B6CFEA43E5689F62EE8C75CBED3F901
-:108D5000BBB4E3A9E344F64BEDBB4F005E14EE0158
-:108D6000B807167A58E4BFD7AA9F6F9231F4A4854A
-:108D700096CFA817E3175178BA17D870BDEA7C6769
-:108D8000A686AE65BF0BABEFFF646C6D21F8C355D3
-:108D90007B843CA4B7C7C02FD19D17314E1AED9AE2
-:108DA0001EDFB93D1B690712F23793B65EF73D0D22
-:108DB0004588983FA72B4590006F6E1EBFD08DEF62
-:108DC0008879ABF034F48B0ECF2463B02FC82DF725
-:108DD0000213C221B2BDBAFFBD60215EB0131B05F4
-:108DE00001E9B1F18158DCCF8899E1D15319A30091
-:108DF0007DBE680C611C937737FBFDCF2E4B680757
-:108E0000CAA581CC9FD0F59EB816EA752633BAEE76
-:108E1000DC25737E22EC1D89F7C475582EB07E3B8D
-:108E200017C6627C14DCFF34C2BD4CEF9FEBC1BFA0
-:108E3000A2DAF1C777B0F714E0777BB47630DC9B29
-:108E40002D1F16960FF83E0CF0734B2CF713B92B11
-:108E500070BCBB6208C461D41A048CEBADADBC120B
-:108E6000EF9110FE8E73359F5AAD81DA83C3C27CB9
-:108E70005E6B383608ECA96AF3327CDF9996BF093D
-:108E80007618FCCC6EF7EF7864F7A4EBDA6567FE32
-:108E90008AF7DA9BF5F8AF0ED309DE8FABD4D24D4B
-:108EA00076981E50DF0639319EE0BD7C1BCFC74E41
-:108EB0006CF3839FC6C3FD16C907D8BBB5B682261F
-:108EC000027E53CF29A66F8C6E5D7B10ECDFF88994
-:108ED0006D6071D1FACCEF16797F6854EB7211ECAA
-:108EE0003A554FD1D895436E1EAA4DD97D5BB053EC
-:108EF00061BC207C02FE90D8FEF63CDFDFE83E88B5
-:108F0000F278AE6F30EE83B04F811C53ED5C906B06
-:108F100020475EEE376E5A3FBACE3C65DC2DFDD859
-:108F200039CC10D4EBBD9777DEA4D6037BF7E2FEF5
-:108F30003006B7D0CA382627E00740C14FFC5B791E
-:108F40002DBEEB0D8297CE77DEEA6C94BBAA9FA66E
-:108F50009AFBA94AB95FA794FB75C0AFAA8D7B05A0
-:108F6000BFA5365FCDF9BE067E4F0ADF0B3085E325
-:108F70005EC19F339E046C500E7E1D3BBB5FA76D90
-:108F8000EF21FE2209E9FC7B93EE5DAC156CBD334D
-:108F900039DE575A983F67F4436B45E6A462EB8D80
-:108FA0001BE6CA7EB420FC3ED7E71C4F2A5C8CFD32
-:108FB000C6DD03708F11D9FBE6A147D9EF5D9FA0F5
-:108FC000FBF356EEEFB8D98AF78B5D03212E417281
-:108FD00064DD1CE5775B97EEB6E03BFDCBFAB1F3C1
-:108FE00060F5FBB87EECFE2EFA8100EE0B6351CFEC
-:108FF000A660CE033A2AECAFEE97240FFC4F4779D8
-:109000007C67EDED5637F417E47EF195FDD8BEB5DB
-:10901000B21F7BEF5FCD77DB759C5ED4732CF0C7FE
-:1090200068FDD7FEEEFACC7FA2EEAFCF57C4A05CAE
-:109030000AD3AD01EF4FC6E6161BC18FB49BCB918F
-:10904000126EAFEF86035A90274DDCEF2C3966C0C5
-:10905000EF02ED3E958BF1924946265F76DF19438C
-:10906000207EEFD0E9579F788F969F3B65C4F7F03D
-:10907000E6707FEB6E78F71DE4E57613FA11AB8DA1
-:109080004C5FACDE3794E92946F74A88EBF66E93DD
-:10909000D1AF556DF76F7A05CBD39D14B3701F9484
-:1090A000E9B9BB6259FB18FF2F5F03BB735FAAD3FB
-:1090B0004BEB2F4873EF03BC66989438A29EAB0A23
-:1090C000E1FBA2C7FC4C2F3E068207C669B5F1DF63
-:1090D0009173A5CFA5FD1C7F3C15D743E52DEA4F25
-:1090E000C79F32E1B9D9F3DDE332FFE731B918DFC9
-:1090F0008B39B63DDF492D4BD2556C0C807FDBF3AD
-:1091000034D3E7661B9435001FB22FD6A9B3479F0F
-:109110002A63EF47543E34E562E7D820DFB5FEDD31
-:109120004E12CA427BB4BC7F13C49376B60E71B2A2
-:10913000E3AA343C24A9E5E7CB276406DFD05E1917
-:10914000E9F972FB07BAE8FE9D3B91E0EFB769CF02
-:10915000D322CF217AE6191E3DBB53B9DEA62FBF1D
-:1091600025D31D02F956FBCCB7471628305E08E51B
-:1091700021F1317FFA09D93503E8367E7C4017A703
-:109180006556185FCD36F1FD9E048C5A3E54CB0BCC
-:10919000C791A8E7362685E901367EEE1C59FE7F89
-:1091A00000F2988AEC008000000000001F8B08008D
-:1091B00000000000000BC57D0B7854D5B5F03E7360
-:1091C000CEBC92996426992493F7C93BE4014308E5
-:1091D000112DEA24040C98D209A062B538BC41C90B
-:1091E00043B0BDB1C566201102A2861A1128E084E1
-:1091F0008762D5367801A346EF8048B1D5FBC747D3
-:109200005BB4F7F78B4A29528188964BEFB5F55F2F
-:109210006BED7D92394322D8DBDB3F7CB0D967BF51
-:10922000D65E6BEDB5D65E7BED1DB36A602C81C159
-:10923000CF4C334B64EC1AC67F324F316FD0C69897
-:109240004555A9FC9A5321D37CC867AE0C99168961
-:10925000D40FE909230B59CA21DD620FEECCC29667
-:109260005E86FD2C9A00FF85A68B64D66629C3EF27
-:109270006A4FBF8BB193079C9EF5F09D7DF995CC0D
-:109280002A189BCB443D336BB7C431F67C9B14B298
-:1092900040BDB99BCD3BADD05FC56AAF6C87FCC00C
-:1092A00076C9B313EACD6DABCCDF02F93BF7977A01
-:1092B00064681A83E3603EE80CCA50FF9AE649EC02
-:1092C000E3718CCD37074D0A7C674F4B6C0FA3FEC3
-:1092D000DBB0FF65D02819E0F90A7FAE1F4A176F8F
-:1092E00036C364F9DCBFC27F8261F96CE8B7BB4B5F
-:1092F00066305FB617BE170E7D5FA6840E49318CAF
-:10930000D57747B4677F330FD643405980F0E832B2
-:10931000B13B7C369A74525D29637FC0FF26336669
-:10932000CAF48D53C763263769861DE65DC5E735E8
-:10933000B04F22BCD6B32613C37E3AE319BB3A6CB6
-:109340005C0B0B45437A520E50F922F3464A6BD41C
-:109350002C1AEF4ED66F6239D8EF80C907E3D9FBDC
-:1093600080AE2597CEBF06F960FCC87C3055F0C1B1
-:10937000B2532C742D8CB76C250BD58FE6A91DD25A
-:10938000450A0BC4005E17010E62451A55C6F1AAC4
-:10939000160EE16569509F477CAA6178463C869726
-:1093A00037F67C650ECF279918B3C60DD11908453D
-:1093B00070274D6A1ADB04705EB3322833985F4A17
-:1093C000BA77522EC01B5DCEE7DB78DC6251C760F6
-:1093D000DEC7B2A1DE176995CFE54179A3C2BCDD36
-:1093E000501E0D78E982EFDBAD2C80FD3F9EA75229
-:1093F000BF6E13E75FA3E263636D4897BE9001E918
-:1094000092C01CC88F1A3EB7DBA15D19B693A8DDC8
-:10941000607B0B6B8B0A6B5FF5A29531582F175E43
-:10942000B007CD509529FE4C27F497F87B335B0F9E
-:10943000F9B32FDA97607F678D6C7637D477C9AC34
-:10944000A99BF8650DE1FF8748D7F1C84D55A90CD8
-:10945000795F9A96CADC58BE9ABED73B81BF86A177
-:10946000EF607956DFCD9CAFCCEA4E18EF82B3FFA8
-:10947000079807785800F2CB550E77E3FE49637FD3
-:1094800004DF1B7D360FC7BE7F2CF2AB59BEE766EB
-:109490000BF0D71479E5C0BD308FFA749BC30C4D27
-:1094A000AA33FFE3B7B742FE93FD4666463AEF990B
-:1094B000349B655F0A87962E0D1A3FEA0F5B2F7764
-:1094C000EDD5E7EBBBF5F946A67CD4AFF101A06082
-:1094D0008B6A779D8C26D9E1F90AF8DB6C6E3AD558
-:1094E00005F09A5F327B56C1E706D5BF03D7538399
-:1094F00061E028E2D99CF9E9683FE0A52AF3CBA313
-:10950000A988FFFB9807E1BE60AD9C4BF4D862557B
-:109510000361F2AB51F07F67462D95776E35AB1244
-:109520002FAF1D0F726B092D61AA623100FE1B3730
-:109530004FFD441A4DE516A44727F029B57B4E0A86
-:10954000AE82764B362FAE65507E86054D1680E78F
-:109550000F623D35CABD532CF0DFCEB89A51285F5B
-:1095600094BF2A3EA4FF5AECEAEA217CBD34B83EFF
-:109570002D1D27002F373289C5E2BC9DFE97709EB6
-:10958000F5967E5325F473FD5FBF20B9BCB8F9D5BD
-:109590009C13E350DE78E712BD617E284716DF7B1F
-:1095A00088BE4B332C04DFC9745BD00CDF5FDD62F7
-:1095B000E679A789F227B74B945FDC2D052D595822
-:1095C000FF627C25CAEFED4687995D8AA748BCFCFF
-:1095D00071DBEF621880FC47102DB8BE98A329C636
-:1095E00067C7B2A69819A588AF1B3E41F9B578BBED
-:1095F000EC09A19C7ED9EEC963989F3C6AA10DDB62
-:109600007F1E5F89F8DB31D921D377D9877288290A
-:10961000DEBEEBE1BBB2E32A15D7CB91ED1CEEC564
-:109620004ECB1348E7EBFF2A13FF2B06E6DF674319
-:109630003A7847E1BA53B7ED9982F8FD635D8A81C4
-:10964000EA3F2B3107E2C3D99C88DF174B8A0FD73B
-:10965000D992CD4B6B59CC10DED7A832E1BD327315
-:109660006562BF8DF8FE66D477F5DB81CF71FC199A
-:10967000EFFFF656D710DF4B33364FBF06FB7FD2D6
-:1096800048FCA5F5D3B8EDDB823F180B019E160B05
-:109690003C993357E6E3F8975B0F8B5737E53B6C04
-:1096A000975F1783EB7D1BAC8F62C6FEAA4AEC2B3B
-:1096B000A0034B8B233D33D27AD4F493ADD0C0F5C5
-:1096C000BE8779F7409A64665E09E457769642E56C
-:1096D000D95926C287F297E57BDF04F89F53FDD165
-:1096E0005990CF64DEB1A867D40147552CF4664386
-:1096F00006294738CCC13D24E7200F78DA94C09E74
-:10970000581F066786E80FD6AB0BFB39FBDE974781
-:10971000118F0D199F8E46BDDD78F10B930AF4B4BD
-:10972000F54A24676D1E1F43FE68ECAD630B4A8645
-:10973000E463A387CBEF4BE44C9691CB33D700F592
-:1097400033359BCBB74E275F9F5B9BA38228F7B631
-:10975000BA8256043ABA3CC050BE4F2F973D08B665
-:1097600066A7F82C9C5E16EFAB4C467EF5C81E141F
-:10977000F17DDE8FDBE221FF66F9648F0C799B7748
-:10978000577B36CEDB6314E539019CF71B132BC9DD
-:109790005E99EE95695CB6242688AAA2CFFB8E6BF3
-:1097A000018CFB1DE67DE404D0B1069437D2B10FE5
-:1097B000C7067A9D71F827205EB4F97CDB33F591FA
-:1097C00013E1768697DB03F089EBB1F2E1F1305AD1
-:1097D000ADBC0EFBB9FE3A4E87D3CF9A83AB61FC8A
-:1097E000D356D03361FAE2B49DEB1D5F9624ECC2F0
-:1097F000EE0C94FB8379659401D7FD3D0E8E0F9797
-:10980000A93B03D7DB9F247D3F77B6CB2C0872663C
-:1098100069BBC48200E2E9A79ECF40F9FBC99EE77D
-:1098200033E685C117D94E4BBFAB8DD7F198D70220
-:10983000E3CD63DA78A1341C6F9EC7FC21CA0FD632
-:109840003ED9DB1F663F90840CABCF367B497E9FB1
-:1098500083D5887CA7B53BB724CA8B76E6396609E1
-:109860004A30D4BC5E3964C6FEBCDE5C17D0BB4156
-:109870006B1FD17FA7E01FA9470AD9A17E74C90039
-:10988000C9DBA516DFD154285A8A7484FA53918E05
-:1098900012F2ABD784F356242ECFCF387C7767C132
-:1098A000BC1676E8E9989EE5E0F375B8B83DD86057
-:1098B00053505F24B6326E077EDF10447DED8A8AF6
-:1098C00019CDC08E31A5B86D28A7AECF8F6A33C42D
-:1098D000E2F78C20D64F4F29A476812ACEDF81442F
-:1098E000166C95B0CB2689EC40473F53E07BDA04F9
-:1098F000E6580FD9DE2C6E27BA9967B34C7662B75B
-:109900008476A286074DBE23DFA0DC3B2D59886FED
-:10991000A45E89EC3ED9D03D07FB1D898FB644F08B
-:10992000D1967F321FED1A918FFC2AF191DB323CE8
-:109930001F81DCFC46F559C0A700BE9204BE1E166E
-:10994000F265E0FB16A21BFC4838DF5AD15FADC5BB
-:10995000169247939CF874507E433FDBC0FEC47D53
-:109960004A32DACF90A6B6CE55B9FDDED72F417F69
-:10997000D1575948EF3D60E8CB423B3FA9A8691F4A
-:10998000F247D29C92B256B24FD29C28F751D6E001
-:10999000FC1B9A27F9B81D00FD221FD599683FD1FD
-:1099A000706FA58FDB0135B43E1A375855D46793D5
-:1099B0007AB356217F34AE04FB08E56F4FD7964546
-:1099C000906F9865F3A09D62B5CC2CC176AC5DBF5D
-:1099D000CED649DD641707A6320FCAED734143C0E6
-:1099E0003806E56CFF8E1FA11E5F5AE209A8B8DE9B
-:1099F000045FE632D20B9D4E6F721CE0F5E0DF642F
-:109A0000DA17758E853CA42F097A76D679939D90C6
-:109A10009FB7C14A78EFECE2E5E7EC8020E83F45EC
-:109A2000E6FDB1580BD73397CA030BE23D7102D361
-:109A30007E36633E45CB773C46768CB6DE3BB3380C
-:109A40003CF6125F165ABEB7ABE3FAA260BD27CA56
-:109A5000066D531440BB3B1AC7E4792F0EF7A801DB
-:109A60000049C1EC7F6FAC9E189EE7F587DA3F3066
-:109A7000A33A8DF4EB6039820D7A57CB7BAD00C7EA
-:109A80005AFB50B902F6A4A54712ED27CC980CAAB0
-:109A9000F89C24C60F281BBD808F87AD4C375E38DD
-:109AA0007C4A44FF46E8DFA68AFA8152DFE45C8004
-:109AB000B74C6BBFAAC30BF03D6CD4F7472815ED2C
-:109AC00031A38DF7EBDCD7376E481BD2FF600FD880
-:109AD000B3C70FD9016BDFAFED180363453B3E37CA
-:109AE000A17ED5F479A34B223B2372BD2665F3F505
-:109AF0000A766D5236C90D6EEFD6A2BD2B939D3BF3
-:109B0000059756E34A1F43FB12EC86D46CB21B3E0A
-:109B10003D7908BE77CE384D767EE34585EC8F469D
-:109B2000B03FD06EB7F4727B96F51849EF6A74BFF8
-:109B300053C89F4E27E87DE4D397A5F1C8A78C357D
-:109B400065DC043468C9F6E6211CDA7E2C12DEEBF3
-:109B5000B2B95DDE5858B5251FFBDF2D31D4FBEBC4
-:109B60000B3F4A44FBA4B1F7C3C48561ED96F63CB4
-:109B70004A7858BAD738ECFCAFCB9669FE0D2F1C4B
-:109B8000F0E27A3F1D94682D2F5182EBD0AE5CB28B
-:109B9000C480961A2B0FCEBD15D73D9B6D627930D0
-:109BA000BF5CD44BB89FD83B33700DEEDBE0AF0405
-:109BB0009FB6FA16D1FADE3ADB62635908E7BCBBFE
-:109BC000090F8E282FE2617D6155328ED35037C543
-:109BD00081FE9346B0B3B0BCE1DEEF923F45836BAC
-:109BE0007D8FB106EDAF0AB0B7FE15E04E8F9B56E4
-:109BF000E381F5982AEF1BBB02F29B4690BFBFC9D9
-:109C0000E1F46C937C81EFE0BA7F41627BD4A1F2F6
-:109C1000CC1E6ED7DD9CCDED40EDFBCDD9DCDE9CBE
-:109C200018E89B84BCF78AD21F8DF66F23F37E86DB
-:109C3000FB4EE6B3A97B884E5CEEB85A54F22B5922
-:109C40005CFD0F8CC1F2890AED2798D2FF088E7B4C
-:109C5000769DCBB39E09FEC5FCBD2541DA3F64FB72
-:109C6000E7237D2B841D79F6851BC6CE2B19B29375
-:109C7000D6755983AB010FEBECEA4F6A50BEFD4538
-:109C800021F9C62C037D93901EFF1547FDAEB30648
-:109C9000D721FD031B8D54BE2FC5DF807C79AAAE72
-:109CA000261FF7C1CC16C8AF037E32BA3A18DA0BBA
-:109CB000B07D203F83C5E5632AE42705E62A12CA62
-:109CC000F908FB6312FA7968DF0083C3F72A21B62B
-:109CD000F2800B4E5A6809B47D153F648F1CFB72ED
-:109CE00096821F353BC560F12FC5A6D5B3A3988CCE
-:109CF0007CBF66E0A801E613EDEA233BB6BE5BA29B
-:109D000071EA0B9F33A1DFE4AE6EBE2E1BC53E0091
-:109D1000F09781F6C0DAEC68A1C7DB38BFB33EDA52
-:109D200047B367383D19837AF6F0FDC42AAAA7F530
-:109D3000675ACDFD5EF5C21F037290CA7F922D89CE
-:109D40007DED6A9176F0548CBB49EAF3CA88D7B1AD
-:109D500092279C6FB4F429212F620F0F4CC1F53B61
-:109D600000FC857E992D52DDDDAFC1FCB68C2FF253
-:109D7000A009E5067692CBF03BB022E0BDBCE7B38C
-:109D800029C8376070D37A6DE8A994EB6DA4B769E0
-:109D9000FF9814DDD485E5497714925E8D1AC7EEDD
-:109DA0009801DF7F2EF09A6CE37E2EF7EA40D6F220
-:109DB000121CDF77F76B387E6914F929938036F629
-:109DC000384ADBD12FE466AB24ACF7680CEF3FC117
-:109DD00020DF5157427297F2711EC9BB13D29E6C9D
-:109DE00027F76799590DC289DF693F069C81FB59A6
-:109DF000F473613F49393C3D9B1C5250406C65FDFA
-:109E00003BF6207FF6981D88A7DA9E5F1E477D5996
-:109E10006B61DD32DA2B1176C6CAF49987903FCF99
-:109E20009D39B9E37EF8F6E84D073D7EA28BDE7ED4
-:109E300088DC2FECC42AC923DB7BBFCBD6DB7B833A
-:109E4000F97FB8BDC7EDFAC09E68754F983C6F1496
-:109E5000FBB4734BCEC7A09EF97890BF404F570C10
-:109E6000D92BF376477F88EB6AD0EE8FB01B8E3DFF
-:109E7000111D40FA9FEFB6929F4E41BB07E0396338
-:109E80001FF80122C765F27925DC3FEC337A56438F
-:109E90007F8D779EFEB901D69DD205764F2CDAFBD9
-:109EA0006A2CC9D9D765B607ED32C5EB40BF870626
-:109EB000BFE29CE2F696A05CE4F35F660AE5931DC0
-:109EC00064624B281F13CA47BBE725A1779645411B
-:109ED0001EBE37BBFD7F41BAA598B9BCC276F8BD9E
-:109EE0004BD85B5D801207E2E538ECBBB384FEC65D
-:109EF000FDCF83E9C1F5E4C7B1103D3F7EC5BC137A
-:109F0000FD3C1F171A4226EE97203F96DAAEB0644A
-:109F1000A8AF1EB70655EEEFB21840FFCF7FF8AEE0
-:109F200037705F31FF15EEC79A7FE7CAE9B8FFF8CF
-:109F300078C61413CA9B85CC4F7EE7C58CFBA197CE
-:109F4000B220F757338701C7BB0BC4C6561435017F
-:109F5000C0FE55F05932486857A86D9027A3D9DB49
-:109F60005103E3CE6B33D0BE647EBBDE9F7E61FDCA
-:109F7000DD35A8C7D7B619B8FDD82E911E9FCFBC26
-:109F80006EB43B34BC16E4C473FF689BC18BE35CC6
-:109F90009F6322FE031205697E226D330A3FBC8057
-:109FA000631533843035483C5DEB506A86D3CF5A15
-:109FB0007F6DC6260BFAC306D20DE407BE60F2CE53
-:109FC000263F6A5C3E433F629BBDA9BD8697D39AFC
-:109FD000B9601DF051F9B50A37F8981A87F2323D89
-:109FE00087DB0F91F35DD8A1CF479E4F2C0DEAF38D
-:109FF000F399BF203907FD46FAEFE9395C5E5D58F9
-:10A000009F25CE013C740ED06654DFCE4279B54E0A
-:10A010002179B92A8DE3CB90CED36C67F56CE25FE2
-:10A0200027D817042F873FFB5A97847AB3CDC9F9F5
-:10A03000F27F0A7724BC37E4E413BC6D68E4C1788E
-:10A040006DEBA420C71787FB4AFD174B72F47268AB
-:10A0500030FF8FDF77727E5C278BF5E6203934CFB7
-:10A06000C1E7F4B1E4792284DF6D601F00DCF3D72F
-:10A07000C96568A74C9A69A37934BC62257F6BFDDA
-:10A08000CAFE0CB267ABFAF39B86C12B42AB68F2F7
-:10A090000BEACD73C13E01D76DBBFE9C0A342D0B7C
-:10A0A0003F779A99E6BD2F2701F7231FEFFB25D2B3
-:10A0B0007B9F95F413FCEF9019E5D70B596437E5B6
-:10A0C000A7F9EFCF41BD1E15DAF16416DA29DC4E8F
-:10A0D000AAEF3577A11D38AF2DECDC0BFFD9A03FDF
-:10A0E0000763ED71E4DF609DFAEF4BB645B4BBE466
-:10A0F0005C8CEBFB4D26FF28B4EFAEBFCE9B8C7281
-:10A10000F5CC520343FACE973D8B508E9CB1EAEDCD
-:10A11000EF33764EAFDD8374F6E4239D778F486787
-:10A120004F3ED279BE81F9C3FBA9473A037D970917
-:10A130003A9F3970553ED2F9D37D57E5239D3719A3
-:10A140003BBCB86E7665FAF7221E4F4CF691FD04C3
-:10A15000F22AFF9BF0E38B11FCF8E2FF1E3F52BB9B
-:10A1600091F4E1D19CE1F5A1CBA4A6A13C9C67317F
-:10A170007FAD5EC49F61FD6B1633F9255EF9F2F386
-:10A18000879E403BA457263B44EBEF15C59F837E3B
-:10A1900085578EBB3D0169E4FEEF16FB18B78505B8
-:10A1A000D0FFA1D9FD9AFD18298FDF17783C9DE3D8
-:10A1B000FD36ED1785BF7689E8D312FC9CDBA9BB81
-:10A1C00025F2C75AD46E2FDABD0D2FCF75A0BFF67A
-:10A1D0005490FB671B0E8C25FFEDD2E0ABA154B46D
-:10A1E0000B7B2507EE1F96EEFE3006CFBB613FFAD4
-:10A1F000494ED87E74B2D88F9E0A7E1C83E7E23027
-:10A20000FE54D4CBD1AE0113F26F03ECD3A00A6B92
-:10A2100050068E627F0D2EE609A0A8E8D1EFDBB4D0
-:10A22000F3CBAD3E13C9BBADBD5210F76989267F94
-:10A23000561AEA2796E6A0732EB15EFE33C79B98A6
-:10A240003B3EFCDCD8FB971C7EAE4CEDFBB7C4124A
-:10A250001FF61B9997EC802D7621971492537FDE81
-:10A26000E6A47D0FFD40FD3F07B328AFE9EB450AAB
-:10A270000B2980F745B3BCEF21DD507E8722E477C0
-:10A28000787EF03C9AF571FD02F23C34DCF9B83886
-:10A29000A7C6F3DDF0F60D6C80DAE139AFAE5F6D85
-:10A2A0001FC09AC6AA00F75DB7DB3C68BF34025FE7
-:10A2B00037970DF1E13231158D0F1B849FB771C9AE
-:10A2C00047B41F68EC911CE8DF5DE6E17CB80CF652
-:10A2D00049E6D197AE5BD60D7C1806F748EB785C63
-:10A2E000AE7E1D0FE6FF49FECCEB72F5EB579BBF30
-:10A2F000E6171F9C67AFC4D757C4BC22F79791FEDF
-:10A300006C6D7F78A572EDA6087CDCF4BF8C8F9114
-:10A31000E4DADCDC91E49AFEBCE01BCBB5C87383C5
-:10A320005CEE07C773033CD7FD9F9E1B7CA276247F
-:10A330001A480F7A75E7A968A7E338EDDB65B20F15
-:10A34000A6C8FC1CBADE6E263F6DE4796BA33A45C5
-:10A350009C2FF6FDF66AD49FFB8D0CF5FA12DB629A
-:10A360003ACF6C949F3139D461CE19954364BF7F45
-:10A37000D3F3F775B983E7EF5978FEFEAAEDF378CA
-:10A380007F185DAB4AC0D02FA1389661E5F62382D5
-:10A390004FA245FC844509306758FB91DAFD34979C
-:10A3A000DBCBAF8A381AB789B5637CC6C3F6682F92
-:10A3B000EE4BDC061EE7D392EDDB8E72D2A2723C2E
-:10A3C0003FFEC22DCC00F37FDCD84DF224506FF35A
-:10A3D000A05CD4FC305AFF56B15FBD52FE3F30C87E
-:10A3E000779CFF07F3FF2479F06FDA78DFF49C6C39
-:10A3F00033E046B74E189D87BD81E73B5997F2F38E
-:10A4000048FD8CC4D76FE7FADECC25B9E01D4DE7D7
-:10A41000FE572877A2CB073E467F0FDB6F5671DFD2
-:10A42000817E0FD2971B92B91E533C158867B0F7F7
-:10A430002A304EEA03FCEFD523DB87A706E513B7E6
-:10A440000F4F8D289FFE3EFBF04799BED3C867276C
-:10A450002ABDF9A83FD7DA017EDCF73DC5E36BB62C
-:10A4600059397F6E93385FB2E678CD7F42F30A3C6C
-:10A47000CBCFC723F98AE5E9F96A30FF4F96ABB62F
-:10A480004138FE97E5EA92FF8A413FE8C8FD04881B
-:10A490006E15557D84B7819725B633CC3FDDD8C77F
-:10A4A000E3D4D205BCDAF70BC2DE5D94E7CDC07809
-:10A4B000AF4FDFB358582C9842C8636897F96C7453
-:10A4C0003ED0D0CDE3481A56323A0F6E40FF6709AE
-:10A4D000FA05EB18DA7FCFA9FEC2BCF1789E610BBA
-:10A4E000C8B1E8379FC1D0EE3BFB1ECF37A8FE12A4
-:10A4F0002C6F5CD9AF3B87A8F8EAF335E8D7007832
-:10A50000C94FE042BF4D189D66E7F1F84B2DBD29BC
-:10A51000027EF4E313FF77CB41B417A3D53E3A177D
-:10A5200068D8CF8DB80AD94BFE7B76571C433E6A5C
-:10A53000D85F39F635AA6F1D8BF66EC5EF6B1DE837
-:10A54000A7F8F45A17C51F64C8FD4BD1DE3A92ED47
-:10A550009F84F8B09707A7A2BD9A09F62ADABF9F91
-:10A56000EE9B3A16E1D6E4DF26F47F43BF9BEC7AFC
-:10A57000FF36B378B3EE47FFF7CE24DA3FEE4BF168
-:10A580007F1BE7BFC9CAE10D6CB4F2F52AFCDE916E
-:10A59000EB5F5BF749B281C649BACD42E7D49A5C1A
-:10A5A000D864647E4BCE903C1927E2E9001F3C9EA4
-:10A5B000AFB78EC78188BCCDA58F6B3C9D33791C0E
-:10A5C000C2332E4FA1760B2D0312FAE1178AF3F94D
-:10A5D0001B449C85166775C6E15B80F8602B6B8613
-:10A5E000CEE5B3B1BD83F3BF889F89BEC8EDE86CEB
-:10A5F0008789F8C6DECEF8B912F00DD267E240DFE7
-:10A60000A458984F6E676822E2F3958B06C2875272
-:10A61000F7069DA7C422D9A09F9C0DFDEB0AD09FF1
-:10A62000E278F75AA48BDAE1A842D43DA7FAEEC942
-:10A63000A375DE5488FBCBAADF1879BCE0CBD164CC
-:10A640000774662CA378C1B3EF03BF665DAA0FB48D
-:10A6500034C056537C6076CF3BE4D7B7EF97868DF6
-:10A66000FB7C38CFC6E36F027D1487C626BA081F6D
-:10A67000CACBBF0FA0FDA1AC53C893D166F41AACEE
-:10A6800048D7558CFCF0799D0E03D22553C49D9C70
-:10A690007BE5BF47FB69BFA2F9F1833C4EC8D8BF39
-:10A6A00006F75FCAAAFEEB6005B3FAFD4E4303FA54
-:10A6B0003D8D030DE43779399AFCA3993D39ABBF41
-:10A6C00005F9CC76079350FEBC785726F27500E664
-:10A6D0009937CC3C9BF38CB45E9497A30DA8B794A8
-:10A6E0008D8CE21415676215C1FD28E4A19FE582F7
-:10A6F0006FB4F34900D78DFA68519E7F37D23B5A29
-:10A70000C801D61C45FE44BBC2FD1EF6E6F79F5DA0
-:10A7100005F91DC21F7BF895E219E4BF5BA7484805
-:10A72000870BCEB9990EF8FE8B3C6E8FD8953EE61E
-:10A73000B085E3FF30C56566BFCCE3D61423E713CD
-:10A74000659DAB0BFD835FA4F929FEF4DAB6904C4E
-:10A75000E75B8E138FD4A861FB9BCD5C8F34ECE557
-:10A76000FBEAC8FDCCE5F4C7B13CBD5D3E98FF27D0
-:10A77000D925EF0C8EFF77EE53987E7F17699F44A3
-:10A78000EEE72EB1BF23FA1BC94ED1E23CAA86C622
-:10A79000217E78D5AED941015D1C4C958D8FCB2C97
-:10A7A000FAFE9F12F13B5A5C4C62ABBA0AE3CF0748
-:10A7B000EE63E46FD3E276B4389D4015DF47040CB6
-:10A7C00020F7B2F07CA883E27352594892683FD0D8
-:10A7D000CFB07D12C6E940FBFEBC6C827F3BF3B478
-:10A7E000CB24175509E1B7627C473CC21DDCB20897
-:10A7F000C7BBC946E35931BE239EF611B48E537CC4
-:10A800003CAE73D2121E0F9A02FA17F329B99C2F8D
-:10A81000ADB34D14E7A9C56D68F11D1A5EAA04BE5B
-:10A82000530A1665E17E418B03D914157CCA2A634D
-:10A83000FC8790FB4B0D24F7B5F8BACE3C3588FC6D
-:10A840007E0EE3406D571EEF11895F2DEEE3FA7423
-:10A850007F72FE788AFB203DAAC56B68FC1246C752
-:10A860008015C6DFFA32B7DFAB969808FE734BA7A8
-:10A87000917FF1DC5203C37554D56BE6FC1731DED2
-:10A88000D6D92616C27E95A015E5A7C60797B35F51
-:10A8900081AE85E8BF3DDCB237E704ACF9232DDD9E
-:10A8A000949EB34ADDF2184C07E6A0A41AFD64C6D4
-:10A8B0004CE56A8C6319C8908075CAF6E6CEA27C16
-:10A8C000C2C007989FF6E4AC590AE8897379033B44
-:10A8D00024A8EF2FF87026E5912753189BF0C46F3A
-:10A8E000660668DEDC1F3549F8A3CC4EFFB5F909D2
-:10A8F000785FA07F4D1FF97D78DC3FC605223DDCE7
-:10A900003613D9376E118FC9AA457C269ECC40BE1E
-:10A9100035792C9D67DB98BABF0FCBD3CC5CDF3386
-:10A92000CECFAD79DC5F4C2A1265679AE65FEA0FFD
-:10A93000A0BC6ACD7252FB41B9BADF1CE47E2E3E48
-:10A94000FE5B074AE91C4A8B3365CC913EAB94E22F
-:10A950005174F987ADFC5C94298E74B41F5A8DC272
-:10A960004E15F9A834FF77F3C3ECA4B726FF4B09C3
-:10A97000AE8733077F948B72EA0613D8F1C3C8A55C
-:10A98000D4422E97CE196DED12D86D6FA4FAE7233D
-:10A99000BE8E47CF99E28479CD8EAF343911DEC0B7
-:10A9A0005332CAC904416FE72C0E9FB3DA272D84B6
-:10A9B0007E5BADB09EA17D825FF192BDEE9F25DDF5
-:10A9C0000470B74AC27E676A2CD9ED856A2C9EFB5B
-:10A9D0002D6B7E87E2AE652107642107DE6EE9CF2D
-:10A9E00055F240E5766F94D1DE7E479C3FBF93C51C
-:10A9F000EEA81B66FFBB299FDB873364B514F9C83B
-:10AA000075FFC4776A812F64932748F44BB7ABC8AE
-:10AA1000EF87EC15EE7EE847CABCAF1CE3965BD32C
-:10AA2000EF2BC7B81339CEE3F685E537E5733EAEB5
-:10AA3000C67A88B7E8A672D463FFB0FE62A1BF925F
-:10AA4000BFBFBFC17ECC1CAE6596810C05D6A7C723
-:10AA5000EDDF8A74BB30F7433A8FFD41CA5B1F605C
-:10AA6000FCC45BC68E49312887B224C1B7DC5E3B8B
-:10AA70005AA0F93D79DCFBD162EEF70439C4E32B2F
-:10AA80004BF93D9BDA598CD673AD88BB98E2E0F761
-:10AA900096A69467795A616AD3D98082727ACA710C
-:10AAA0005F0CD28FCDF297FB4A47B6C398DBA886DE
-:10AAB000CB95A96A581EFEDE58A8CF7FDBA3CF7FB7
-:10AAC00067C25F0BC2F31BDDDEE771DE2F493C8EF0
-:10AAD00033703573D03C5D5200EDA5E2E753BA8484
-:10AAE0007F97E20D7F26F673CF4F60549EB8D7B2A2
-:10AAF00013EF1F687E72599417BB9925338EF0416E
-:10AB00007A764012718B2E3A0B6207EF7670FC4119
-:10AB10005D13F47370AE4AEB38D16660D7E15A2FFB
-:10AB2000B790FDA4AD8B562BF037E0B122D512853E
-:10AB3000FCDE6AF46CC6BEE428B38A7AB532C6423B
-:10AB40007DCB3F56482FADB29A29F4F5F08351944E
-:10AB5000AF50980FE33500C45998BE65F4049B705C
-:10AB6000BE500FE7DBEA6424AFE40A13E969E89713
-:10AB7000E87A78A321C868FE950AC5630A98B57576
-:10AB80000723D1F7C7C4BA960D2C44722CC5427264
-:10AB9000EC08F48FFD1E7E5DEE223F5BA17A3B96B2
-:10ABA0009FB714D0FD9CC6C17B478A01812B1476C8
-:10ABB00094B397DF0FD3D6B3265F22D73348C15C57
-:10ABC0005722E320AAF80F4C2311F53E237B5E3B6E
-:10ABD0003F4CB768E58A17C7491EACCFEF67258A97
-:10ABE0007C6A4116AD37A8123294A1FDF1CBBF208B
-:10ABF000DF6AF261C7DA1F937CB814FF85DFA7FC18
-:10AC000034BB83E3BF200DD7A11C559086FAAED587
-:10AC1000E9517D61F9425846B3E3103F500FF233DA
-:10AC20006B3ECC55C2FC83A9052A094BA8E78D07CA
-:10AC3000380E5BD5345CAFC38C5BCFC78DFEC78E3F
-:10AC4000EB8671A1DE613B8C0BF5765BCD2143CCAD
-:10AC500070E34F5071BCCB8D0BE824A44E137806E3
-:10AC6000BE08A05FEAB0DD40FC394DC4EF1E4EE0E7
-:10AC7000E3B1427D7C4D6E148C4FFE587D3CCD0D72
-:10AC8000D2B636D4CB8F596376223FFE52F0C9D16B
-:10AC9000E81FE7A25DF5CB39F94750AE4C895DD589
-:10ACA000864C328D7593BCD1E4DE85E40F2B300FDA
-:10ACB000F2EF9A02A0FB0FB2DF9A839D1F713E96BE
-:10ACC0008BFA0FE4C3B70A122E855FE3470D6EE4DB
-:10ACD000435C07837C1801BFC6476C7A3705206E3A
-:10ACE00007BB1453CD4E65AC89C789ABE943F30369
-:10ACF000269E6269E2F3581520B86F703E42F168F3
-:10AD0000D78EF2FB10DED9633ECB50B0B27B6E0122
-:10AD1000EEC300DEBAFF9FF046DAE5978B97D6E0E8
-:10AD20008A5CC7DAF8D28CBD142FDD38CB46F1D35C
-:10AD30009344DC69E31203C511C1FE8DECFE066687
-:10AD400009A21CBE46D8D15A1CFF8B12F77F060EF3
-:10AD500098D53D61F6F8A571D42AC5690756F278F1
-:10AD6000EB417BBB9EDBDB837A4DDC1BE81CCB65B8
-:10AD700079E7DD2AC553BC24F1FA81B98CDBEB7588
-:10AD8000A27CA143C45BC05C1287E2D93BBB18F133
-:10AD90007FA73D9BCA5364AE7FD8B7B8FEE9CCE22B
-:10ADA000F664E7ADF9540EFB825188F7F932D8CF3B
-:10ADB000FCFC9EEF0FF2F878917EDA4D05DC2E1B3D
-:10ADC000B473443ED22FBB2BD3BF05F965618937DD
-:10ADD0004302BE9A6FE27E57E0BB6D7867A6863568
-:10ADE000ED5672F0FE45D3BB861CE2BBC789EF8AE5
-:10ADF00081EF72747C172C18CFE52F0A538DEF0664
-:10AE0000F9AD30325ECEFF148EDBE9ECFE7D03EE51
-:10AE10002B7ACD44072DEE31729D87C173C2C8E1F4
-:10AE200071C932C1B36F3878AE84FFC3F92D89710F
-:10AE30003E1F691D24292C602F1B5A071BDDFE10A5
-:10AE4000C23FB81ED6F07DE42570CB36E28B9B6FF7
-:10AE50009539BF46737D8EE74DC9307E9D18FFE65C
-:10AE600075BE6A27D6AB93080F75BDF51417C6AA31
-:10AE7000F9B99107FE203CAD42CE69E75BB345FBD3
-:10AE8000998E3A23FAE366D5EACF9966DBF839D68C
-:10AE9000CDB38C1F85DB3DB3D986CF308E71369E06
-:10AEA0004369F5818FDE2F183C872AC073A823C21F
-:10AEB000CF720EF81AF9FEB584C5DBEE06BE2BF88C
-:10AEC000694919FAE326272EDDBD11F24F6E2DA236
-:10AED000FC6B89B7DDF31696EFC8A77CB541223E1F
-:10AEE0003D57CFDB1756DC3A2D2B06E5BFE817D7C9
-:10AEF00013EED7A3FC9D7550CF3D3ABB0CE34BAB93
-:10AF000085DFE0DCDD8CCA6F1C63E721BB8B55F26B
-:10AF1000FB554789F2EFF17EDF18FBBB328C33AE75
-:10AF2000CE1E9883FCFD46D94B45983F227D36675F
-:10AF3000B873AFE24229340AF0521DC7EBD7963DF1
-:10AF400095827E98EA2A9E2FF654AECBC172C3F941
-:10AF500039C3DDFF8D12FB9EC1FB6C625D3FEFFDCF
-:10AF600090EEAFF92C9207A7E89BF021F91D984DC0
-:10AF700072A0EBCCE7CD52D0CF3DC9CBE350AB2C88
-:10AF8000AB92517E4DF79BCA319ED861197B04E389
-:10AF90000C6227548E47BA4EB230A22BF0794C2166
-:10AFA000FAB5AFFA2C230699CBA6E7738D8FEA3456
-:10AFB000FEAED6F331AC4F57E1F8CBCBDB91F818AE
-:10AFC000C6CFC0F6B3BFA5D73783FD45ACB7C8FE23
-:10AFD000479203F8132E1787E0E8A6759586D17D72
-:10AFE00039B8EE3AB4753706E13019FAE81E4FA6C3
-:10AFF000E429A20BAD133C16D24711706BF0A58368
-:10B000006C636597C2853F8A662F72081C8E441C4C
-:10B010009797433B2F8B1B820BC6BF1EE9C0D67090
-:10B0200078B64B4D5C6E88FD81E6CF68D0E6DBA339
-:10B030009F6F4514BFD7EE46BF13B6738D2DFA3AF6
-:10B04000B81B853E9D65F13D688639DCE49C4FFC6C
-:10B05000700B683427CCFF6FA9FE3AC447AB147855
-:10B06000B93F8BFCF114FF01F49E5118660768701C
-:10B0700045E2A3610479180977241E86E8D3978CEA
-:10B08000A9761F6E705E11F369B5F3F53A30DECC28
-:10B09000DFB550C01485FC9B5211C5A16870BD2955
-:10B0A00071BF6440E2F78F347B2212BEC87B7A1AEC
-:10B0B0005CE8EFE3700CACC23B820F166A7E3E4E3A
-:10B0C000AF24019FC9200D7B1EFE60A141F3B3EAAE
-:10B0D000E819797F4DC39B16E715892F2D4EEB920A
-:10B0E00073B78873E591EA4960A7A7C65D8A47ED03
-:10B0F000DC2E6ED04FC9FD4003F7DA490EC60DFABB
-:10B10000298F2968DF4FF21C52D02EAFAD81090084
-:10B110000DDE147E1F0DDF0F64F8B71492DEEE1FF4
-:10B120008FFE959F4C7D82CEAB3E30703F7D247E5E
-:10B13000F68C809F91F87D24F8A3D27C4FE2B8670B
-:10B14000A4BE0A2CECCC16E742CC9F85EBC1E9C823
-:10B15000AA44FF11C8D7AFBEC24D2B16015DCB3339
-:10B16000FDBFC076B730DF64A46F5C8DDFC8CF4908
-:10B1700018F9E1978BFDE364A177CF6FE3F11ED55A
-:10B18000DE518F4D44BBF198910569DD7B497FDE2F
-:10B1900025E03F0F2A3684F59FB193FE5DFCFA7CD3
-:10B1A0008AE328D86C187A4F03FE8E0A46E9DED36C
-:10B1B00028DE1BA7CB9776A7E8EA8FE9C9D6958F3B
-:10B1C0000D15E9CAC71D2BD3E5C7F75DA3AB7FD526
-:10B1D000F12A5DFEEAFE69BAFADF3A354397BF7697
-:10B1E000E0BBBAFA1F0FFA0F84DD10F0F615C2BCEF
-:10B1F0001788795F7F719EAEFD9F62A61C437E5CBF
-:10B20000B081C7A557028674EF8B7470FBA209FE4C
-:10B21000207D27B3018A076C084A9E10C3F836BD0B
-:10B22000FDB1B4A78BF078B9FBF805AEB90634B917
-:10B230004F170AFBE32A76158F67FD7ABAE6B3BC8F
-:10B24000BF8BAE66B79EAE56554FD7E8423D5DED1B
-:10B250001E3D5D6327E8E9EAF4EAE91A5FA3A76BFC
-:10B26000824F4FD7A4D97ABA26FBF5744D5DA2A7B9
-:10B270006B7A939EAE99CD7ABA6505EED4958F44DC
-:10B280006F4D9EE6B42FD7D51FA4BB6F09C537E518
-:10B2900075FC50D7BF46F700FC41BA17301187F94B
-:10B2A0003FA47BE1283DBD416F8D1A359EEC8D1288
-:10B2B0004C671708BBDE37BCBDA1C99F70FD1EBE21
-:10B2C000AF1D492E5DA2CFC43E77447D16B1CF7D20
-:10B2D0008F81BEA5413690DFEA56C19F87A338DE35
-:10B2E0003FC7A2ABA11ED4990070BD8770C338EFD1
-:10B2F0004515933FE2BBACDB88FDDFCEFA289DC34A
-:10B300000628F53307E9EF79CC43E902E63309FF74
-:10B31000C4F45109E8B7E8AF40FD7F61EE5B1FD090
-:10B32000B9D61BF157F40EC547787E92C7D849218C
-:10B330000F4EE0390AE4CF5A07F5ABEA0AC3DB49FE
-:10B34000E16F9C3749223DCDE4288AEF9A778B4400
-:10B35000E744F3FE93A78B46493C1E24226D6DD62D
-:10B36000F0C7F7473B47A904471AEB16F61CF3DB77
-:10B3700072A81F7EEEB1CB44FB58B785C3F7ACC4AF
-:10B38000940971741D8EE8EAB670789E35320BE22E
-:10B39000F369E65791180F2820A2F83D8C22E48F1C
-:10B3A00079FFF95636FAE9A2A25E98557D359ECB13
-:10B3B0000456919FFC7B4CEF27BFBD49223FF9F714
-:10B3C000004E48DD0E8F1BED7C2DFFB080B71AEBD1
-:10B3D000C1F7247793847EA97F587FFB7FC8EBFD5C
-:10B3E0009DFD0DF6C3385CF883F4D3FC9E85061EE4
-:10B3F00027317037DF1FEDFE1EE3FEBBE640650020
-:10B40000CF45653094308ECAC8EFC7EF1CC5FD9E8E
-:10B41000C9AC8FFC0BECA866D7FA49FE9688FB17DF
-:10B4200067C5B9E2A22E0BC3389D927D87E2F01C5E
-:10B430007111F0601FEA61C54FEFBF946C792D8EDA
-:10B44000FBFD8C4EBC57A9E9FF91F9546127C3EE6F
-:10B450003100DF350D677FBC5AC4E3035A5BFA46FF
-:10B46000E139A006CFFD2DC7282F2B1E86E797F8C0
-:10B470003E5478FCA3C905E561F24EB141FB303979
-:10B4800064B4F9E89195352D7D74BE6814EF58AD1C
-:10B490004D5BEEF087D989874609FBC71260B84F2C
-:10B4A000E02A0A53E524CAB5FF627C1F6D76433F4C
-:10B4B000E1F2F362020B3F1F686F394EF0AE91FC70
-:10B4C0007EECC49CCB4256A08F59C1BBC0F07DCB53
-:10B4D0000DC7308ECB645FEE09A923E3CDEC562E69
-:10B4E00084CBD3B723E4E94F5A068A719CD6967E63
-:10B4F0000D5F0CCF6B03C9DCBE6E6DF984BE1BC043
-:10B500003E447E7B754BC12115CA3F80BFF8DE8E5D
-:10B51000D9C5E162175DA457E7083E405F5C3AF089
-:10B52000CF07CD46E2B315E9363A2758F166DE215A
-:10B530002FAC67134C57FE06700F8DC3F16412F2E7
-:10B5400014F8C987F2C194A2D079419C6306D1E96D
-:10B55000EFED4FC3AFC9CAE89D2453BA8DEC822BDF
-:10B5600085F36FA3F83B4083F6C94517C9FF150261
-:10B570002FDABB4F1FDCC3C8DFB3E25EEE375C518E
-:10B58000CFE81E026B869F8A21BED1F44C02BE50CA
-:10B59000031F3B5A60C541170FB55898BF00EC1008
-:10B5A0008CDBCF19A2638757716288C1C66A571DA9
-:10B5B000A60F4D38D181E2EFE1895FF4618A67041B
-:10B5C00038BEA38905D13EA6B37F18DFB904F23097
-:10B5D0007E8C288FF1F37CAC288F9DCDF3E9DEE7DC
-:10B5E000A46A042CE23C2BDD16373517E5F402C6BD
-:10B5F000EF818B7720B60B7D916A8BABABC6F2DB0C
-:10B6000019DD0BD1CA7F2ACA936D1FB5E7A01E9919
-:10B61000A56FBF45E021C9F651C7243AF7D2976B11
-:10B62000E74A09B6F3C7A87D89BEFC51D1DE6E3B5F
-:10B63000DF3709CB73F5E33F28CAA36D5C1E321FC9
-:10B64000E3EF1588F20744B915CB717C0F2F97B53E
-:10B65000773944BD75020E8CA923BFEB28EE77DD48
-:10B66000D1622921BAB45C24FA3CD4C2287F6B5140
-:10B670001CC909430DC7779C8BF383A3990DFB4E1F
-:10B68000C1AD42AEC5A8FD5EEF30724F2B8F73F097
-:10B69000771864B789F8C96C137243ACC741B921F4
-:10B6A00035793893713FFDE5F81A16DA05B48F3213
-:10B6B000E007F93AED1E03F387C9CB946551CC1F1F
-:10B6C00056DFBD204E974FBC3D4557DF352B5B57AE
-:10B6D0006E2B2FD295B35971B46E960BFE8A2A2920
-:10B6E000D3956BEF43B0DDA29E58BFC6DC6B74F5FB
-:10B6F000CE17AAB1C8E327A782FEA178068F05E579
-:10B70000C3727B7612EA9FA75B2610729E85750531
-:10B71000462B7BC6C9E3DC9FC1F34328FF598B97B7
-:10B72000BEEF817215D25DB0EE54A8DFD5E2A0FC69
-:10B73000E32D6E4AB7B7A894FEB4A590CAB7B47803
-:10B7400028FF18F48FE9A3D00F7E7FA4A586F21BF3
-:10B750005B7C947FB86536E51F6CF153FA40CB12E1
-:10B76000FABEAEA589F26B5B9A29BDBF2540696B15
-:10B770004B3B6F57C4F5CC33E25EED3395FCBE7C9A
-:10B78000241D3B8B841F52C4ADD887E2563A8B30C0
-:10B790006EA5BB9FEC702D6E05E74DFD59F9FC239E
-:10B7A000FB7BAA88DB6F45AC6F55345FCF743E9C42
-:10B7B000D7E3591D0D7C9FDAC4E990D53340E5C924
-:10B7C0004B382D9E12FCC95C01965641510254EF34
-:10B7D000ACD45715CDCFD529CE91B9619E15E2FDD8
-:10B7E0002662BBA001E1522670FDA9D17570DE4E24
-:10B7F0000E27CE7F3878F70B78E5F26EFE2E4B4D94
-:10B800004708D93ECADB44EFB25866FB420AA42E71
-:10B810009F9FDE8928BA38053667206F2E5EC75491
-:10B8200048D396E9F76D290BCA74FB22F9E2434C21
-:10B830000539602BD1EFAFA27297EBDA59D27EA80F
-:10B840002B37B956EBCAE7DD95B5C68DF84CE5E761
-:10B850004BE60DAB5832C0B5B07323C1F59198C714
-:10B860005949A5FBE5817D5ABC05DF5F3C29F40BF6
-:10B87000B36C207BACC0C9B3F9B10103EA874FFFB9
-:10B880003596E4D2138F1B82E84706F164C0F55F5A
-:10B890000C661F9697B27ECA63A80CE6C73255C6DF
-:10B8A000FC383640FB2BD85FBC5F8471ABB2FF71B4
-:10B8B0002BE4CFA4FB9FE4717321D29FF9829EF900
-:10B8C000DA7E6AB312E95FEE2F22FF8DFE7E5D9B6A
-:10B8D000D85FB459B99F6E95B32209EDD6B323C48E
-:10B8E00039DADDAF1E5D00F8B6271FA274D02FA78E
-:10B8F0001A86BD3FFE4504FF8F026617FCFF05F266
-:10B90000FF99F2B713D10DD5903B40EBE0ACE47555
-:10B91000CF45FCBE2E737E841D17CE4F11F855F611
-:10B9200055BAE7021E9537733C013634CE132DC746
-:10B9300073300E41CBE78B38DDBD2DC9B9D561DF42
-:10B94000D5624EC742D65783FAAAB0C4E00962C78F
-:10B950005E87CE8F61CDEDF0E27B084A19F3A098A7
-:10B960001BC53A56A3EE56FE26539C9572F86AA65E
-:10B97000C27EC6660B318C4BD3FA65C21F728F90A4
-:10B980009B5F38AA63E99DCB9441F9873A927D6128
-:10B99000F3F6211F7DD169E4F33AAC2F2FB471BFC8
-:10B9A000E1A242535095F05DB50E7AC751D921B14D
-:10B9B000B42C846312E1811D8C263E8CDE3C9A05FA
-:10B9C00060BD943BFD9662F4DB85D483861CC193F5
-:10B9D00050AFBED8B413EDB302C48B0DF1726B6ED1
-:10B9E000350E9D5B48F85D28E63DBE98D3AB2D3DF6
-:10B9F000021EE6F1E27BA78B3A353F8E7E9E0F96C4
-:10BA0000577D07DF856CED93B95A8BC0E77A63DF0A
-:10BA1000E8B9D0F5997E804B2638C717A30DBAB97F
-:10BA20008205488FF3F9D53F2EB1AD5924976A4866
-:10BA30008F8F37B0F0F3532D9D58CCE5EFB1221E18
-:10BA4000876A771F257E1CCA1F39BA00F0F1B481BE
-:10BA500015D2B9B181EF8FB5781D19FD0078AFA16E
-:10BA600058C845D6C6A6A1DE761A28FE54EE8AA28C
-:10BA70007BB3B253A1B8F7365BB5E34EECC7A1D0A8
-:10BA800039D11479621FDAD166A7611CDAE14776F1
-:10BA9000FEB00FE386E47485A1DFABCDA1703B243B
-:10BAA000CD40F1808AB3DA82E74AF9B6139588CFA0
-:10BAB000435D3FA07722E4EF8B981DE117330A9294
-:10BAC000B5B126EA3F90A688F766BCB56313C59169
-:10BAD000888AFBA19A4F70BF7DC471DE8AFB02D5B4
-:10BAE000B688FC81F715F37DA211CF0F21FFF8CAAC
-:10BAF000F34E945FAF77AD89CB427B3AA8902D523D
-:10BB0000F8D7D6147A0FA1CB44EF356878CD0C283E
-:10BB1000BA73C8F4667DDE1C711E698CB827B75CE9
-:10BB20008C8F2797A1B0F918DD7CFFC65C36DAFF51
-:10BB3000DC572CDEE914F97B447EAF3190E201FC46
-:10BB40001CEE5A9489F3BAF0829FE2CE47B2FF27E7
-:10BB500015AB62BC80D540EF0287AC1887BEBB85B1
-:10BB600079D0CEB30415BA07B047C8B35C1BE7FF62
-:10BB70003B4AF87A8D4C733BF8BA539E890A4623A8
-:10BB8000DD1CDD650158E7C5AF4E652AE8C15C875D
-:10BB9000D780FEF7DC669307EDCF29BFB0119F9CDD
-:10BBA000B7F1382EA5F90115BFB7EEAC2854C3E0A4
-:10BBB0000EB6383C289F76B6583C181B1F1C41BE59
-:10BBC000E6380D143FAF1A783CE72EB11E7715F317
-:10BBD000F788760A39B34B09CC403877013D316E8E
-:10BBE000FFD0066E1F2F5F65213896BF9E43F6D5A6
-:10BBF00048787BA2C5EDC94578361852D05F55B953
-:10BC00002E773DBEDFB1DCCEDF3796638B1EC3AB34
-:10BC100011ECD74686F67C6BCC359EF961F25D8ED1
-:10BC20009D58887C25CB8114F4E7F43C7DE1268C7B
-:10BC3000E705FA6DC57CA8F8839B307E77AF3D9011
-:10BC400082F1BDC78A3FE2E50981AD18DFDB577C91
-:10BC50009297A707520C903F5E7C9A97E705B662D1
-:10BC6000BEBFF82CCFE3D91BC8CE53C5E76F0AA0DF
-:10BC7000BFC5E4598202F9E7007F092CB16E919E9D
-:10BC80001678D1CA9FC3EFB001DB2FD2C8F283A2CE
-:10BC90005DCF08E52F8AF2DE11FA7F45B40B8DD017
-:10BCA000FEB068776484F64745BB632394FF4A94EB
-:10BCB000BF3142FFFF2EDAF58DD0FE6DD1EEDD11E2
-:10BCC000DAFF56B43B3E42F9FBA2FC3F22FAFF40AA
-:10BCD000D4EF17DFB3ED1BDE47FF7D36C811944B61
-:10BCE00085F60D71B8CE77B69713FFB756F0732A65
-:10BCF0008DDFB32546EF0EDF56C2DF3BBBAD84CBF5
-:10BD000071A584F339F0E1C3C877CBDF94299EA8ED
-:10BD1000D5E039154439BADE40F6C0F2D7F97E7D58
-:10BD2000F93A25187E1F486BAFC1BF06E103C66D07
-:10BD3000C314D6DB97C5FC9CD1EC767B6AC3E4992F
-:10BD4000D1A1CF83BC602877417E53DC78E1BAAAC9
-:10BD5000F6C2723CEB339005A2D45B42F88E886247
-:10BD6000177AC151DE5188F0D9147A3F4193F3CC50
-:10BD7000E6D6F935DA6C0ABD2727DB79F9945F4CF2
-:10BD800074A09DD5C6FC7D5E6CEF56C88E3FD45E18
-:10BD9000E640B967B22F70E0FAFDB894E3BDBAA1EE
-:10BDA000300AE5B5FCA081E4F711075FEF3BDC3C0E
-:10BDB000CE0AF40ADDAF0279ED411D51C042AB500D
-:10BDC0006EEE7DE8E05CEEE763F6B115747F493B0B
-:10BDD000579794B07D406D09C74FA6D0230AEA1744
-:10BDE0004877958B7B3701EE8FCA54983B35ECFE34
-:10BDF000706D89CCEF3D69E7A1722DBDAB95B15255
-:10BE0000D19D23A4DDA3CF9B22F48612A15772DA21
-:10BE1000414EEACE4F1CBAFCB74A849FC7C33C6868
-:10BE2000C74EF9C5069287E751BF4923CBBD41F9FB
-:10BE30002BE4F12E4400CAD100BFDF7E6843D9AFA6
-:10BE400090DECBD719E83DEB2B95A30AE218F090D2
-:10BE5000E797482FC0845270DF74393CE4197D7134
-:10BE6000F4DEC765F091F768791CCADB3CBF42FD80
-:10BE70005FA2372E83AF6725CF713FD2D11925EC52
-:10BE80006A6000F4DBC54575E1F9BE49F853B43882
-:10BE9000652549E1EFF58B7BB2B2E0E3FB99578D65
-:10BEA000CBC1F78A9AC8BFBF62DF3D6EB4DBD71A39
-:10BEB000FC0ECC1F8B9B3680E32C874D3FE26F2F0F
-:10BEC000F641EF72BE7D33FA4DBA8326ED5DCD109B
-:10BED000FEB30FE38FB4773BDD64AF897CD5CDD55E
-:10BEE00030DF6EC5518C266847C9E44D46B049F72E
-:10BEF00099D8607DBCEFF7F41183E8EFC64DD520EB
-:10BF000097F64531DDBBA5FBD0CF4EF9E99BF09DFF
-:10BF10005218EF4619F6663B9F99B5C976F5103C65
-:10BF2000BB9FFDEEA655E8B013FB1427E3EFCD9FB2
-:10BF300051FB6390B4B05F595F82FBF5AE1389E1AA
-:10BF4000FB75AD7EACA8DFD03BD0F08C4AF53B4A08
-:10BF5000801FEA7B06624A08DF0315E1F563841F50
-:10BF600020ACFEA6AFAB5FA8C1F3CCDB3797F0FAED
-:10BF7000DBB0FE59B53F91627A22E089BFB4FF9DE4
-:10BF800004FF08FD1789FA67426F53FDB3AC3FB158
-:10BF9000348BDA3D85E39C7BE3ED0A31EF443CC70B
-:10BFA00079D7E6FD197E6FC13E707FA734A9F8BD31
-:10BFB000DBD2E140FBCD6AECF0A11CCEC5F7C72671
-:10BFC0000CA5CFA2F2187FE9F7487EEEB6B0F85A7A
-:10BFD000E4D76603ED6F7AFA0D0F205FEE489BE819
-:10BFE000C0FDF33E535F5909DAAF076C64BF1A32E4
-:10BFF0003FB5A2DFDC5CC0D7BFD5D9E42981BC3511
-:10C00000BD84DE0F95EF5DDE4DEF98DFC7DFF752A1
-:10C010007E6CF2EF46FE0A2D2F5C18B6BE7797F2C3
-:10C020007B96EB5EB36DC0FDC13AA3A7A300ED7094
-:10C03000BB42719FCA8F0F4E23FBF0E70646F21FEB
-:10C04000E65905FDB6CD55E8F7300C94CEEB2B2123
-:10C050007CF87C55502F234191F07ED0FD8ACF8211
-:10C06000E71D6661D7EDF0F0FB61DAB81784FD7962
-:10C07000A184BFB7B623EDC27B8B5DF8FE8389EE4A
-:10C0800075DA961942A618BCE7B6F3D462A46774B1
-:10C09000FF3ABCE71C95A238707E3FAD85323A97D7
-:10C0A000EBA6EF817A03ED1BE29719BCE87F8CCAFF
-:10C0B00035E9FC1D361827DC1F1233DAFF47A4E7E9
-:10C0C000B837951B11CFEEBB0DF43EEA83EE772D0A
-:10C0D000068033A65CDFDE3151DF3EAE5A5FEEAA4A
-:10C0E000D59727CED297BB6F3745F875F4F9268DD3
-:10C0F000AF4026D8404F45F1221665BBD082FB9E4B
-:10C10000B5AF4531A2CFCA4D1D05B83EA307085FA4
-:10C11000514551E417589B6C22B9BEB694FBF50FFC
-:10C12000A79B6EA43CCC0BF96347DA51DA8F5C8293
-:10C1300017DBA9BF62FF3616F61DFDF2A3BD9652AE
-:10C140001E57C3DC15E8C763240F9F95BC9E438828
-:10C15000EFB7B8BF624733F7633F388BC741D20CA4
-:10C160002A70BDF3FA31960D7DB82F8BB1B5DF8DF6
-:10C17000F19D91784D14E70D3BF0762FF29D9FBF16
-:10C180001BBD46BB6785DF2BE8D604BD8B366BB481
-:10C1900078EF4FD809B1EEF892B6B0FB1A89C26FAA
-:10C1A000F2F0C47956D41FFBC43B2283FDA9342886
-:10C1B0000F79457F54A9E6AFE1ED3769E73C229F4F
-:10C1C000E0E4F97D47E26EC4F5B569565C19EEF717
-:10C1D000D70AFB2E36CDE41D05F37AE49829208D8D
-:10C1E00081BCC28E18C12ED817C7C735BD1E15C059
-:10C1F0007B818FB8CBE99E61AD80FBB94ACF3BB85C
-:10C20000DE07601DED84FE1F7179AC65E2DC340051
-:10C21000F051A8159828876ACB68BFFB88D763457B
-:10C22000BDF9489AC78A71DAD664C581716B716E9F
-:10C2300085DE897BC4E277A0FD13078AD484E749B1
-:10C24000E91D53E97E1DE0DA50C18F1A98886FC44A
-:10C25000F8C27881CF1DEE050E7C97C195BBFF5FBC
-:10C26000D04F1F8FFDC5F0768827A7C0D3AC52955D
-:10C27000E07689FEE3173C47F5F1A7AD22AC3F41DC
-:10C2800047D35416C47D9A36BED6CF60FFCC4BE759
-:10C29000006B7EC5F1B62A9DBF8F65BA8BD17EEE4D
-:10C2A000B94AFF5EE4B381E428927729EE942AE448
-:10C2B000A394635B67E0BD8B35BF8AE2E32CE4FCAB
-:10C2C0009EA230CB7538EF04BF03F118B95E938F8F
-:10C2D00074D421536A74895CBFC90A6B97E32E5DDD
-:10C2E000C7C96E5755FEE861D673C47A493E36F029
-:10C2F0007DEC3F725D6F8FFE602CD72361DFE5CB55
-:10C30000E7DBA4FE75248793155A67E911E3E13B47
-:10C310007B98979841C5B8E8DDA54EC1C7A0974A5C
-:10C3200091EF1D936CFCBC9DF8ABEAF90DDFFD3578
-:10C33000E42FE0EFF3815AA9C73AFA482FF6F80B39
-:10C34000B0FE36C5FF38FAD3B71D4FA2F72BCDD1BB
-:10C35000FCFD5153C47B299ABED85DCAFD486AC40E
-:10C36000BB9BDF34ED4E4B2B7678B0BFB77F6B496C
-:10C37000F8C7DB3F6947BA57D9604D3F5372F32680
-:10C38000BCFF6C7D93973F0DF980827859467E976C
-:10C39000C31977D2FC5BDF33933FAB54F66CC63CDA
-:10C3A000FBBD95FC717B0F4C9C8DEBA4D55EA1A2CF
-:10C3B000BD7F40ACE37F1569E4BC6493C78FF64052
-:10C3C000E4F7674B35FF9BE77817D0B7749789DEA2
-:10C3D000711A8C8FE8B2F2785461872E10F26CC11A
-:10C3E000C1F5198718BEC351F75A29B45F60AF4E23
-:10C3F0004478522F4ACC0FF26F9B389F4D753D27E2
-:10C40000A19C49731DA944799FCEFA56A1DC486FBF
-:10C41000D29F97A55E54A8DDBE142FF5873F18075D
-:10C420006A62624DC7F9D92A94F329FCBCC5E48835
-:10C43000E271A1EE6ADD3D6AED7DDBB7851C350159
-:10C440004E8D6590DA147E6F3FA2FEEF443D19FDDC
-:10C45000F6E8FC771C3D4EFDDA944FC3E34D715F67
-:10C460004A426B193FFF043C05701FCA62E3F8792A
-:10C47000A9D7AB86C7DFA682DC359761FC4980E28D
-:10C480004492C5BD082DAE0730E044BF9B16F7B1FE
-:10C4900093E9ED112DD5F6E7B9CD32ED3B8A5FB5C5
-:10C4A000F2FD413B0B5A25F48731923BB91BF8F959
-:10C4B000B4E617BB0D1713EA257C0F97C6EBA63819
-:10C4C0006ACDAE02FA92DC5917F1CE94F68EB661BF
-:10C4D00034E78B6D2D0EA2A3569EE68FA4A3FE9C7F
-:10C4E00053AB977A3195F9E3C3FB0D527FA9CDFB8E
-:10C4F000891F522F6650F9B616F532FD678FD07F2F
-:10C5000032F1CBC8FDA751F9F6D0BBCEE9808A9FA6
-:10C510000EEC77FA54942BA1A99E61F09C7A8F5E61
-:10C520004E8EE9D1CB5D0D2FDB14AFAB0EF0BDED20
-:10C530001E83A78B61FCA9BE5E4DD66F9CFC5D6B14
-:10C54000AD7EC83513EB2FE3F5BF754A5FDF577932
-:10C5500020B23EC177FD457DBD48FA44C20B70252F
-:10C56000DC1406D7248BFEF7DACD9E7B095C09B775
-:10C5700084C175835B5FDFBF6A78B86E2C347F2D12
-:10C580005C5ABDEF4CB8B27A91F39859631E01EF33
-:10C59000BCFE2DB3AFACDFDB967C7DBD3B9A23C7E1
-:10C5A000096871DB3A7B24BE99DBEF0E36407126B9
-:10C5B0009ADD11C71C22FE8BDB0DEFE07F93197B08
-:10C5C00060B46FCEE804C4BFF7F64755BC1FC3F58F
-:10C5D00015ABE5EF56C2BEA434FC5DEE21B8565350
-:10C5E000BF2F61BC13E9598B07EDCEE25466494673
-:10C5F000E3CB1DCCC6F7C7EA476BF29AC79717097A
-:10C60000DC3D9BD2BDDC49EB3C1887F07CD371EF5D
-:10C610001DEDBD67F4F8A1FA23F95B343C994CDDBC
-:10C62000F47B1D06EA6D1ED40FEF6211B4DB75B307
-:10C63000398476B516877A3C7ACED10495DE3D589A
-:10C640008DFDCFBE65EA1ACC4B87E3D5E536BC3706
-:10C65000D5AFDD2F5D83785B66F167261AE87CB580
-:10C6600000F7C3CC172F2E23FB4A878BD3D0E0A92A
-:10C670009638FEA3D2FC0FE338D586BE1D3EFCA63D
-:10C68000F4F17DB62381BFBB84EFEB0CB3FE353CE8
-:10C6900054897E0E193D5F0EC0FC0E6D8CA57BF893
-:10C6A0000BE26F99836FB22C34F812F1003D0CEE5F
-:10C6B000ED04B76D6E6632C26D14705B1204DEBDA0
-:10C6C000B95F07F760BCCC7D92F67E3AE59F0F38E4
-:10C6D000E9BEBBD9F0F9BB33510F971A3C68776EAE
-:10C6E00003FB02DF77FB3F02DFDBF18C258EBED33D
-:10C6F000BB6F6E71EFCBBDC940EFBCF8AA5E203AAC
-:10C70000ED6AB07970DF3E97A9F4EEEA7C710FE62E
-:10C710000F95FFFD723FCCEFA5D1FE83388F3BE232
-:10C720000D19EF121CFE627A476BE295C5CF6AE7DE
-:10C73000F033847DB050E07126F352DCEE4DCC6FC7
-:10C74000C471DF3E6BF2A25DFAB68847BE8505E88C
-:10C75000FBAD2C48E96D2C44F5BF872FCA42FEADD6
-:10C76000E8D1E9CD005FDD630579B81EC3F0FE06B0
-:10C77000D219F8E50E17E7973F2621DE3B13AE8866
-:10C780007FEB248EBF0746FB7FC3D7ABEAF2204C7A
-:10C790008E4969E847195C3FD5099CFF1447DED7ED
-:10C7A000AD9FBEF3DA7D7FAF2DB902DFFBE23F37ED
-:10C7B00078EFA278718CCB77011DFA547ECF11C42B
-:10C7C000863D0074AAA994296E6FED67E27E363A21
-:10C7D00031A0DE2FC7CAF43E99762E395DF4373D7D
-:10C7E0008DDF57ACAD9CD9160B7899F2657F79082F
-:10C7F000D29A34FDFDC5A9AE2E7AD27C5AAEFEFB8C
-:10C800008DAC830E886B4BF471E6D323FC9F87704D
-:10C810006CE0AB8BA345BC64112B0ABF6FF01DD13C
-:10C82000F67CEDE7A673307EC918FF57488FE5DF29
-:10C83000FEC31CDAD729ECCD7130BF867F97C99E25
-:10C84000FCA80566528071D516E60583FF24D8152D
-:10C85000983FD5E2A6F434D801987EDA5248E567CD
-:10C860005B3C949F35C6671903FDCE6BFF4C417D41
-:10C87000B4568BC716706871856B45FCC40AFBF211
-:10C88000E318BFB08202DE192CF68E2908FE9D3D0A
-:10C89000DD473185EF32EE43566C94C8AFB3F08874
-:10C8A0007F0D9279F11BFDD3514C8CFFCD8944DC77
-:10C8B000A7D7A31D0BACBF22CE9B340658C0DBFB11
-:10C8C000E1D178A8FFC7960904DF272D5E82EF4FDC
-:10C8D0002D3594D68FF1A5533DF619BDF3F4ED67D0
-:10C8E0003E54F0F7B34DF64AE4BFBFCECB8241C011
-:10C8F000EB662397EF9B41BEE3FAAC2C9DB1FD1E86
-:10C9000086F2D75F80F3BC296EFEE478F83E7DC2E4
-:10C910005C05EBDDF225E8A0AC213EBC1C5F9F79F5
-:10C920004522FC9C79C549F8D0F0542FE875E660A3
-:10C93000F177F0DDB3578EC9147F7AFEA281E03B18
-:10C940007F3C8AE25323DB2F3F909384F6D89F806D
-:10C950007E78F0B1FC4031F9E3FFF4ECBFA8E1715F
-:10C96000BF7F8AEBBEF03ECAA9FFCBE514D89B2758
-:10C97000B7A21C4B4BA1F77B06E3D5585334EAB161
-:10C980000693585F206730FFA728BE0FAEF8796A7C
-:10C9900015AE171C0FE3BDCCE2F760407F1FFC1003
-:10C9A000FA3BB8D54DEFFD7CBAEFB16C1C7F6FF749
-:10C9B000C2F7B742FF6782FCF7609C61DD675F44A6
-:10C9C00079BADB467ECBB512C085FA744F0AE50B07
-:10C9D0002525AA999C19411E8722A90ABE7FB6EC7B
-:10C9E000B92D29C85F784F1DE3EA5FDA184D72EA66
-:10C9F00025A3E78366EC6F3BEFEFC987EEFDA80741
-:10CA0000D307EBCBEE45393786C7312EF8C9D22292
-:10CA10006C0FFA9A7EDFF3D3CF4B21F48394761E0A
-:10CA20005A8D714C63B67D68488174EC6EA915D33C
-:10CA3000E2F469C7D07F70D71895DA8F7B264BC692
-:10CA4000D8F4A294E0FBD7F3B8119D7E2FE9FCAC9B
-:10CA50000AB7999A9E2F92BA4F77E1BE38E37819B8
-:10CA6000BFDFC5DFAF3ED03BF39DDB18CE032C0804
-:10CA7000847BAE89E22E5830D085743EE32FF4D00B
-:10CA8000BB2ABEC016E4AF33FE44BA5F78D010882C
-:10CA9000C1DFE314F880FFBEA1E777BF1583F1146F
-:10CAA000B1FB8D0C7F2F76FDD88129141F92AED259
-:10CAB0007E3C7DC70D35889F86FD07BAA89F651609
-:10CAC0000FFA63971CF89CEEBDB0A93C0EF5CC7E26
-:10CAD0009E7FA0DA4BEF9D2FE9FA33CFF7F928EFCD
-:10CAE000930359747F623EB7771E13FA8CF58F66F5
-:10CAF000E1EF2169F47A008AB17C73562019DFBD19
-:10CB0000D2F420E8AF8770FDA1DB91DA3B66F27BBF
-:10CB1000F257A8BF4C421F69FD3D66E2EFF4A21830
-:10CB2000C1DF8BB3CDC4F5EE1E9037C82F9ADE85DA
-:10CB30007177E0BA3589FB32A9A064C7C27C521F65
-:10CB40003373F97D85E347DE67D5EC90D9F1AD7499
-:10CB50006FF5D354FFCF701CEDFE2A533CF4AEE0CA
-:10CB6000EF53BD4F8F49E0EF75E01C402FFE02F3FD
-:10CB70000D32D85139617694E5CAF4E2DF52BD072F
-:10CB8000709C2BAD1F2987270AF857D80D8487156D
-:10CB90008F9AC91F3651DC439D78FE7834CA9315AD
-:10CBA0007F2E23B9D2CAD8B0F879B985C779FF1BCF
-:10CBB000FA1120BDF68B7E99F623470CCB8E827E30
-:10CBC0002510C87F38D01A5B4E792F92FBBA2F0CF4
-:10CBD000C3EE17B514E8F52EC9E92FF5FE87EBBFB4
-:10CBE00074D0EFCD64B6B82B9AF7D0FB3EFAF96B50
-:10CBF000EF6CC1FCFA51BFAFF8CC40FCBBE2B332E2
-:10CC0000929BBD57385FABCB7B12E18C9C0FC0FF72
-:10CC100029D22712FE417E1FB832F8BF2F31FA7D8C
-:10CC200043A0AEC8BFDD2BDE31E85D5A42EF691C80
-:10CC3000C4F748506ECEE0F78E7AC5FDE4DE0407F7
-:10CC4000BDF7F19291E703B78AF6E27DC8DE5B5348
-:10CC5000F87B1DE6A65F9762FFAD3C3EAED718A4F9
-:10CC6000DF53FBFF00D94A3097008000000000002E
-:10CC70001F8B080000000000000BE57D7B7CD4C505
-:10CC8000D5F7FCF696DD64936C42C88590B0B91078
-:10CC90008206DCDCB806582041B468038802C6B8B6
-:10CCA0002101426E844BFBC4969AC500A2C51A1E90
-:10CCB00011D1A22E14282ADA50115183CF0A4269C9
-:10CCC000BDA5D5FAD86A692278E59210B40FF6E1CD
-:10CCD0006DDFF99E99C9EE6F49D4F67DFAC7F379F5
-:10CCE000E347C7F9CDFD9C33E79C3967CE6CFB8FDA
-:10CCF00006B9BC4EC68CD6B939A7F3197BCF67F0FD
-:10CD00009AA3196BD1FCB71A0B18F35EB0B0DD69AA
-:10CD10008C6D89F1272FE7F92DCBAEA2FAEF3136D2
-:10CD2000B32D07DFDD49B13C3DF837E3EDA5769E35
-:10CD3000CFE5799EBEA4B1F9543EDB9D14C3F30B3D
-:10CD4000C3A346B36B787E876FF7D6387CCFA67EB9
-:10CD500086185923D54B13FDFCD12CDAFD81F1BF88
-:10CD600024C61E3533AF2D96B1F1AE45C35D858C1B
-:10CD7000796E8C30B16814BA93343E9F47AA86B35B
-:10CD80007B359E6D7D88B178C6E65B19FDA9F150B3
-:10CD9000D13A86B179E2335BB078B7CDC3E733AF30
-:10CDA000DAD6A58DE6EBA8BE2BD2C9C79BE731FA30
-:10CDB000C3A278859B4ADC9DD9A2EEDFD331AE9B1E
-:10CDC000C66555837886A7267F25E3E3BEDC6365C9
-:10CDD000F772B8FC1D7F5302298718638319FBD4AF
-:10CDE00026C6AF6F9BFAC069D51FFFB7DA62DFA80E
-:10CDF00045A33CD5C7F8F8FB87780AD0FFF243D7A4
-:10CE00003D70DA1AA857B5B8248B1902E3868E1341
-:10CE10003A5E0BF0C6C71B063CF2262DBCC000FCD8
-:10CE2000B5D97CC01F33F5FC6129CFB7CCBFCA751B
-:10CE30002FCFCE9C63756B1C0FBD07C27C611ABEE1
-:10CE400087BBB1AE96C3913E03CFDFAE09F8B7689A
-:10CE50008CBE7BF79B7DBBF9B73A8BEF893DBC5D00
-:10CE6000DDCB235D7C6476D0C2FF83F21723447947
-:10CE7000943B6D7D01CA1308BF2F999DD154FE6B61
-:10CE800023A3F2707F560C877753A2678E8BCF7BDC
-:10CE90004818C7BF1DFD8AEF2725FD9DE4DD02BFB1
-:10CEA000DEC648EA97C9BCE787837CF7D27ADC49BB
-:10CEB0008B915F7535ADC78379F079B1068DD67BDF
-:10CEC000D2E1BB278B979F6C1F4CF38893F470B211
-:10CED000F42F6F8CE5F54E1E32BAD0E7074D46BFF2
-:10CEE000250AE5021FDA1C6BD636DEEED48B91AE36
-:10CEF000305E5E767FEDEBF85E7657FD2C4A6BD6A2
-:10CF0000DCC878FDCEBBDE4FF5E45C898FB23ADE3B
-:10CF10002A088F77BADCF5C0EF232E4F23D6BB3C0F
-:10CF2000A77309E37475DED2F1183332F6EE50CFF1
-:10CF30002A7CEF7EE1933DF8CEF194553A8A2FC3D7
-:10CF4000C4E904F4DB399AE87AB9A4DFF45CCF1DB4
-:10CF5000E88FC3B19C65301691D361C13CD89AC1AA
-:10CF6000DF8A4E3E6FDF7D50E3E3D486B737506AE9
-:10CF7000F48D463F67347F94964170F460FF9D7551
-:10CF8000F8A3800F8F81E7397E6AF7EAD7853F13D0
-:10CF90009F572DFE87B7AB6D33BA6DD83FCC67C1B5
-:10CFA000FC6B9925503F4DEC43D001EF6727ED57BF
-:10CFB000FB07E53FE478A8796264DEBD1C3FB5312C
-:10CFC000877E3291EAF1766ABF18AFCCABF55C3957
-:10CFD0001FB1BEB3721F9CE55FCCA09F7D6182FE36
-:10CFE00099A08FF34F2449FA11747BFE89113ECC2E
-:10CFF000275EEE9BF39AD7108E763F62AEDD7C5EA5
-:10D00000CCD53666F628CCBE6DCC9C48C6B64ABE9A
-:10D01000563BA86D0CF895E25FCCDA367A362F676E
-:10D02000D96DA3E78C0AF03F56DA9645DF7D6D593E
-:10D03000687FD0C0AA014F359F9AA79277103CAC69
-:10D0400062BFD63C7535C1478DD3023E027E0C7E51
-:10D050001175E5BA5F766962FF478E49005F1B086C
-:10D06000FFD9898372C04ACE2FB0DCEEE6FD8ED8A0
-:10D0700066D1F5A3EA8DF4E9BFFF0AFD737A1B16AA
-:10D0800082CF21C69E57C2F87CD9CF389CD895E371
-:10D09000BD29DB3DF9641FFE8C029F8C3915DD38FC
-:10D0A000094E024F7FB0283CAD4EE6FCBA1630491F
-:10D0B0000FC0EB60AE271972E53CF29037313CCFE0
-:10D0C000D306097F9557700FA5BFBBFEB024B99357
-:10D0D000B7FF6F9781E6150AD7B51C7E286F31B36D
-:10D0E000DB4B79FBCF9B4F649C3607D6F371B3DBE8
-:10D0F000CD454D5F7EC9B65C2BF6DDD2EDB9D64588
-:10D1000041706FD99B7FC2C9F17A76AF0923B116FE
-:10D1100093EF2713E2F0DDD8E665546E75F3FA67F6
-:10D12000ED47DE44BD25DB63F28CCE40FBA5DB4A38
-:10D13000DC5541F0BF7AAF1E1FA3DAF4F96B0EE99C
-:10D14000F3E65C46F4F08FB6CBF5EBF3F927F4F990
-:10D150004FDE597D33B6C1F3E3C4BEF9D417E9B34A
-:10D1600072B856BF3FE304E4E8A7079F8F02BE6A88
-:10D17000FF54753C99611D7A3AE578D44C7CBDDE4C
-:10D180003D1AD1CB325FE8FE957CE38A7DBD96F0F7
-:10D19000859D154C37A1F83DC3DA6E7673FAAA6BFC
-:10D1A0007A3B037A4CF52C4EC890DF6D9B2DCC7EDC
-:10D1B000E57803F10F66773B19A7BF8A71A26C422D
-:10D1C000D374768AF7C736FD7606F66BC58F35D2EF
-:10D1D000372A9E1DF12AE8A66BFF82EB29BD79262E
-:10D1E000C1A192B92DE0874BDB357F24CF3BC639F7
-:10D1F0000F75F2768B7D9A0BF35EB42E2CC0CFF8B0
-:10D20000BF559B42E6B125A89CCF7FE9A157BED26E
-:10D2100078FFD5DBF5ED967178417ED4ECFA7B583A
-:10D22000F077AE0811BC26B4EF3062DD8BE5FC95DB
-:10D23000FC63DEC90CEB9B209AB0D3F80F971B96CA
-:10D24000619EE2DCC2801C9CB045B4E78CAF02EB6F
-:10D25000AEB75B9C5877BD95F923F87C4E445ADCF9
-:10D260000EFEFDE2B648D21F968431AF358F52666E
-:10D27000CB433B5734DA7DFC9691F4A47ACE7BA85D
-:10D280009FC7355F0BFA316A22FF33915FC6FCB44A
-:10D290001ED08D3B789D3E7D9EB50E22BDA4CEE472
-:10D2A0007F0570A9619D046FC6F1E95670E470AB0B
-:10D2B000E3EB7C2F16FA97BEFD72D646F5971FFA60
-:10D2C0007B58F077AE67322BAFBF3D9CA7347F1FF2
-:10D2D000C1D168616E039FA7F1CE709F97F490D281
-:10D2E00070D0A959EACB5BEE716761DEEB357796BA
-:10D2F000037C6CB3CD053EB6708790435B62B8FE8D
-:10D300001A477A33B55F087D0A7ACA02C1EFB6C4FC
-:10D31000B4F9C1F7B73C9826F4A9BF19092E3DF717
-:10D32000D97C3B35E8D342EFD9B27904B507BF24A5
-:10D330007DEABE48D17EB680EB96C10E9F97E7FF8F
-:10D3400088292641CF766759A91DD7D3D202724AC0
-:10D35000E9D33F1BE6B90BF856EB55FA37ABFE762F
-:10D36000FAE66E293F7B36F379F2FE4F6BA5C70DC7
-:10D3700041FAF003B982FF8F99E6DE23EBB950AF93
-:10D38000CA30FBDE297CBE555B0DCE96B400DC991D
-:10D39000DB9D05389FDE6CCB039D8D99C6E83C7103
-:10D3A0003257F0F38802E6F6F174BBEC777BAE41BE
-:10D3B00097268673FAE3FD9C2EF19B81DFC882528B
-:10D3C0000BE42197E1C4CF43D7B13757C8CD2A4BDF
-:10D3D000E96F26F5339F3E3A28167ACBE915DA4EE7
-:10D3E000312F81E731FF6E73B5D0BAC5FC14DC393B
-:10D3F000DD1492BC977C2BA68F4E7C4FD8386A37B1
-:10D400002B7D1AF8D7747442F0DC72DF28C2E34235
-:10D410008967769F4DD209637F45798993CABFE9B1
-:10D42000BCA5D6C9E980CA39BEFDC077E8794BE111
-:10D430009B997C85A59103E37BD1B898311A077538
-:10D44000B28979C3385C20F3082EF7987C77F1F91C
-:10D450000C3509F8A798047D71EEEC0DCFA3FA6E98
-:10D460000BCF573CB094B979FD8A64E6D2447D165F
-:10D470008DFABC1B234F2133D0AE225AF45B91C0EE
-:10D480007C7749BD1FFC2A13693AF5EB36C48AF64E
-:10D490005179D4DE6B10EDDD269E0ECB10FBA56717
-:10D4A0007D18ED9F8ABB53B24007B3A6E9E9203F40
-:10D4B0004FD08D4A1FCF734A39E34AC4FE5EB46E23
-:10D4C00024C98D165B69FD73C0D7D311A40F566CA8
-:10D4D000B8ED8642CCEF9941D070D8E737EE1F0304
-:10D4E0007A5BB46EC1F77E8FF3C85E1B7D6FCFF39E
-:10D4F0009CCF85BEAD39CB9FE31F16CD3B6A49E477
-:10D50000ED3D6DB3CFBDC8D31BBDFBDF845E70E3C3
-:10D510004D46AA7F236BFBCB1FC117D689716EF0D6
-:10D520005E3025F2FE6E28D218CABB6C8ED4157CF4
-:10D53000FE15127F7F95FBA0C5C6E6FFD28E79A5AA
-:10D5400064A5F3EF374053ED470F1C9727F5C4A9A7
-:10D55000DA76E83DC3A68BFDA5EAA31FF43B19F0DC
-:10D56000E0F5CC122E2ACFE14AF5AB36867565443C
-:10D570002135FB47F07471C1345B1EAF372B9DCD55
-:10D58000C0B9A9E70E23DB49F3EDA9A07D1F99E5FA
-:10D59000C4BEF730E627BEE71B4974DF35B5A7EBFD
-:10D5A0006E9EEFDA31C2D5427C5D9CDF173B18C915
-:10D5B000F7AEA982AF29FE72D2D11949F42ACFF36E
-:10D5C0009592343E6A9ABE752CAF5F69B774411E5E
-:10D5D0002C7E706E9493CFB3720B3FCF7339C636E7
-:10D5E000E9CFF3FCBC9D9137F8CA7379E8F91B3495
-:10D5F000033AAADAA4111D0E6B715992888F690E35
-:10D60000ACAFCAEECF84FCAB72D95C283FDBEC7EBA
-:10D61000E034D70FCF37CFA4945DE670E7F3BC0AB0
-:10D62000C8E3FB7E6CBEC7053855B456D0793222AC
-:10D63000C743FC69B9A4BB591CCC1AF88DA933099E
-:10D64000FBB02B577E8F7564D9899E6D0C70E832C4
-:10D650003BB230AFAEF53603E4E6ACBB045DF37D20
-:10D660006635F1F6F7985838F6FBDFD09EAFB36C0D
-:10D67000ADA97407CF0FB53253642CE82A97E8FAA6
-:10D68000E7051E33E0F0E98FD838E805959B36D3DF
-:10D690007C145D305347F120E879BBD3F270BE565D
-:10D6A00074F4F38269D7E605D3C34D1AD1014F5FF5
-:10D6B000C9207A98338BE8619A3F73259F5789B1C7
-:10D6C0008EB961674864AE303EFF5ED643FA442FA0
-:10D6D000D72720CF143F517C83D381DB1A1FC0EFA3
-:10D6E0009E663E15CE93F7365B297DB2D9C14C1CA0
-:10D6F000BEFB9A1329FF4CB393D2B6E66CFAFECB6D
-:10D700006617E50F348FA3FCC16637E50F35CFA44C
-:10D71000F4C5E652FAAEF812870BF121C557143F53
-:10D7200052F4A4F852281D953BB137A83DF13DC5F0
-:10D73000EFB00E435E801F29FCA66BA5DEC434F05B
-:10D74000B1CE05E01725C6B34F3FCFE1DB5B6D7768
-:10D7500085390117C1F77AED5692F3A9167608E7D5
-:10D76000FF9615EEAEBB83E4EAADD51A3305D1EDD5
-:10D770006D8D36660AA2DBDB9B6274F9B2A6B78FA9
-:10D7800025F0FEFF9EE2F1022F27EFFCF8D1FFE427
-:10D79000DF1FBFF3F3E1C0379FC7EE8730EE9AF08B
-:10D7A000BE79C422BFCE4C726658B838270D0B170D
-:10D7B000E724FC013F8B98D8A78FDFF957DAE75DA4
-:10D7C0004D614E23F40FE08BC3F70389AF454D61E4
-:10D7D00004C78AF5A79E7E1EFB7D8D85F8DDA275A8
-:10D7E000727F6EE4700DD2DB3E4C62A49F696EC600
-:10D7F0009A38FC3EFC91C5CF653FFB50B3FA34DE4E
-:10D8000050E387A632FEDDB3F157EF41DFD69A4EE3
-:10D81000907EECB1DAFD46CCCF6B3E1BDC9FD6741C
-:10D820009CEAB1CEA1311F47D0566480634481DBAE
-:10D83000023E01DA06FE16651F61D8DFAC55730C97
-:10D84000E7EBAA92DFAB366AA47728F83F9167A48A
-:10D850007D753AD744789D863D3B981818C929456F
-:10D86000B79C6FB87DD81FADB9962541FC7891FC67
-:10D870005E996DA0547D3FCDB725FA9986CDC5FB45
-:10D88000BD373BDDB298F89DD3027EA0EA2FCACE09
-:10D89000DB905E807EA6C6B1A07DF95C9E49CECBB2
-:10D8A00021E49895CB31DEAE6E0079A0F4934FF170
-:10D8B000BFE369FE74FEAA79E6A9675E845DE2FDB6
-:10D8C00030C253CD35D2BE91E31B3397F41AB75D06
-:10D8D000E3EB6C90F82F7EEA4F519DBC7CF901611F
-:10D8E0003FE56917D28635D5642F6B70F17D827D57
-:10D8F00070C8FC6167105DBEFACCFB519D74BEF030
-:10D90000261B1291FA93194F1B0E9C9AC1D01FEB44
-:10D91000D9E0B05FD96EB97699CE996A1D2587BFD7
-:10D920008CA7F1B54BF154FFF0FAF8FEEC20CB993F
-:10D93000E9C3BEFD4B7606B7CEAEB69C6DBA60E4C9
-:10D94000F35DBE66E627A0F3D0FA9FE445C6817E6C
-:10D95000D8583696EC18266600BE575A051C7A7DB4
-:10D96000C3A3D9D7D85F966FE38DB8AAD56B72469B
-:10D97000BBF87CBB613FEFA77E4EBE90EBE7F83E65
-:10D9800062FC2CD5BDCF48E785EE7D9144FF0DFBB1
-:10D990001E383E91E71B76691896D5B30E8253C3A5
-:10D9A0000123B306CB33D877060D3CCFDAA7221B71
-:10D9B000414FCBDA34F76E3E9F5EAB337A70D07C4A
-:10D9C0006CF9829E6AC3DAC6105CE5FCFF2EF999F9
-:10D9D000AAB7ACFD010BF0C5EB9D27FDE517118C37
-:10D9E000EC66ACE74DCCF3CCF67C17EC7BCBDAF6EF
-:10D9F0003790FCDF17E118CED7F1B9B4F3AB7E0650
-:10DA0000E78BFD34385FE81D67A43DF7CC3346E271
-:10DA1000439827F6E1E7D07383E6992CE7999C2F8A
-:10DA2000F49B23D88F8581FACBDABAA23279FD4FE5
-:10DA30000EBD4DE97039CE327BC768C8CD4F0E445C
-:10DA4000CCF451FAD3192FF1F1CEB54D8DD382F626
-:10DA5000555EBE99FA3DB7DD3813F062BE4152CF34
-:10DA60006FA3F59CD997ACD1F916F0E67AFE99032D
-:10DA7000CF461968DF7A453B89478355D869C36229
-:10DA80009C52CFB4B642DF58C8B5BB68CEEFEA0FA0
-:10DA90005C20F91BFA5DD5A7FD9684F3770FD93585
-:10DAA000F89F01F45BEF10382F31E624601F945F7C
-:10DAB000E3BCE556F0B1D7CC020F439D0FE15C55B6
-:10DAC000FED620B25BAC343B1390FFE2757E10E4CF
-:10DAD000F32ECF97FB3BB1B31076CEAE3421D7EB0C
-:10DAE00036F2830A5FCF108E772F5F729DCFC83CCE
-:10DAF000F9013FD1FCFC745ADF23D506B785FC2C15
-:10DB0000FE2CD83D4F5A9897FC46BFB4097F40BAC7
-:10DB1000B0EB3F22FD4575B1FEAC41B07F493CD62C
-:10DB2000CDE1E541F8ACDBE9CF82FE72D622EC7C98
-:10DB3000287720CD13F55A24DDA01FF4DB95E638B5
-:10DB40004F7AE673910CFABEE1F9486157F8B96D66
-:10DB5000675890DCAC9674C575262FD6EFDD2DE6A0
-:10DB60008779417F5E6669CD827EA9C65D16D54AFA
-:10DB7000E39D95E32D0B6F15FE098BB047A23E8DFB
-:10DB80006F66E447E979228CF4D4CF933A0E62FCB5
-:10DB9000CF9F18C920C7BBD27C4B0E5139D7DF3875
-:10DBA0003E6A9E0CF363BE9F3D11E963BCFE67664F
-:10DBB000A10F7D16194FFAD089C8ADE5E497D915A4
-:10DBC000A6C1AEF299C62C8928DF2DFC1835CD4DA3
-:10DBD000E47FA8E1DB9DE5513A93C5A27C24D95BA3
-:10DBE0003EFB35DFA71A7DDF88EF1ED65AFE03EC19
-:10DBF000BBBD116477FBFCC9FF1ED99FDFA26697EE
-:10DC0000DEBEA4E84095DF23F9D23D128EF7E53B56
-:10DC100008FFF5116D5BD3699D62BF723CD0B98B73
-:10DC2000EF8F78D8BB4FB6BD10AFD901677FD64F05
-:10DC300001F7BDE27CF3F93E33F95D6A9E8F749380
-:10DC40001DE7EEB106C88B1AA3D0836B0C1C7C3C7D
-:10DC5000D5EEDC9B053DBBE5095B1EE0C1E14DE770
-:10DC6000C89EDD46398E18F7B33D29C2AEEF97F94D
-:10DC700083A3C8AE3F2B96DD3E87F49CEDA301D76E
-:10DC80008BBB220CA00B3E8E5BE3F0A9F9C10F0504
-:10DC90003CA397905ECEF71FF1CB3AC92FEBEF9ED6
-:10DCA000183D11FBE92D23835E70D1E44A003F0C3F
-:10DCB00085D70792AFD41E7CD402BF5D1DDF371E0F
-:10DCC000BE6F6AA57FACF6498DF4BADA0D131F2238
-:10DCD0003EF8A6990DE7F338DBF64054303E8E4B04
-:10DCE0007E1668EFA2FAB5BCBE68FF5A14CD678FE6
-:10DCF000D985F984E2F15BB77FD2F8ADDAF7D14785
-:10DD00001B97EBA3AF5CF745D6F1FDF7C14FF6D9F2
-:10DD1000C87EC5F19E0ABDE38CB96D09D67DE66962
-:10DD20001BF199333162BF7FC2F9A17704E6F19DFF
-:10DD3000FBC9BEF1BBB90CF260A94FDFAF1AF735D2
-:10DD4000C97FEB07B9A26127ABE778407F1C2FDFC3
-:10DD5000A5F66F99A97DE83A9E44BBC2A0FDF9746F
-:10DD600004D1CB9921021F679E194172A52B46D081
-:10DD7000399F6F2ACE2B676244CAA08C703AA89153
-:10DD8000E7D13353DBE8FC7D46DB4F699759B4ABF1
-:10DD900069927E634E7789A01BD024FC61D64D1D0D
-:10DDA000D02760AF1E9347A93F2CF64ABB33E81338
-:10DDB0007228A340C82F86F1E2A5FF83F494360BA6
-:10DDC000F8B247EA7175FBAEF4C301BF75FB34F2DC
-:10DDD0002319543F7CD671CA5ECEE9B1D6ABB96D7A
-:10DDE00098CFBA15CBC88FD4B8F956D0BB5A47AD27
-:10DDF00089CDC479A84B33D27CBA6C7CDF000EC1CC
-:10DE0000E305E95D91817198239EF44C52AE630A5B
-:10DE100084BC42BE95F757B74EDB44E3A4A973A573
-:10DE2000589F8213078B05F6327EDE17E503AC5F41
-:10DE3000CD3374FD6A3EC30B849DA22BCD797F1137
-:10DE4000F0FD86D18573FAC5CBF9D1B15FA397E117
-:10DE5000E4D66737E6F3CF034DF1F97F29F95B2D5F
-:10DE6000ECD27C9E59DBF5FE90EC5DFAFC55FBF4A0
-:10DE7000F99C03FAFCE8767DDEF5AA3E3F448EABC2
-:10DE8000E08473AF738438F722C5B9D71926CEBDA5
-:10DE9000C8E3DC8B14E75E7CC7B917799C7B91C71C
-:10DEA000B917799C7B91E2DC8BEF9505827FD7498E
-:10DEB000BB23F000BF0C7BC1A6FCECB45FBA17C457
-:10DEC00013FF547ED2EE653994EFB3EBCCB6925D7E
-:10DED000876C375C2F993BD473434121FCA71D1BF2
-:10DEE0009280375327D97397BF28ECB97579363BA1
-:10DEF000EC0C9DEB3FD900F5296BA8670EEA779BE8
-:10DF00007BF6101D98FCC4373AD73ADF9A22F047C7
-:10DF1000F60E668FA5F34905E45DECC0780CF5AB11
-:10DF2000B04D7A3F4AA85F25D49F124A07CA8FF2A4
-:10DF3000B8B92709FCFED413D64D98FF2969276389
-:10DF4000F3ADA47F29BDBAC4682738ADBC4FDB0947
-:10DF500039B5AA2096DAF79EE0FA763FF256A595F3
-:10DF600097F2855EADF29B3403F9693C6E9243AB48
-:10DF7000E49C52B59EAEBB4123910692E317ED0699
-:10DF80003A175C7CC7487AC4886D06DD7A46FAC2C7
-:10DF900075F475F5DED8107FE0105DFD6B0EA5877A
-:10DFA000F803AFD2FBA96E5AFB0ACED77337E5EB65
-:10DFB000EA55954E0C81A39CB7D44B5BD66C4B05B0
-:10DFC000FF5915D94BF35FF59C8DEE5D5471F9E265
-:10DFD000E6EBAE4686F3C76AABFB46C0AFBACD1CD4
-:10DFE00003BB56A5943FAC492F8FAB4DCCEB880DAE
-:10DFF000D05DB583B96378FB73B9AD7B0C1C6FE75B
-:10E000000CDBB71639E15FDA91EAE074B55A6B8B35
-:10E010001FCFFB3B15E3D951C0F773AAD9FF933249
-:10E02000F0CBFD196C2DAF776AD3B351A4774B3A7F
-:10E030004B353BC281EF1DAD463A17C03E057B9084
-:10E04000A2871DAD83C233ED817506F07F99D6C7D7
-:10E05000F142F7467AED4786AE821ED726D65B3D63
-:10E0600055F3929E2CD7B352CA15B64EF4B35AE666
-:10E070004FCBF3825ADFD991AF8C76C2AFD97C28CF
-:10E08000D5083E6ED8B72709FA4582A71DFBA77AA7
-:10E09000C7F0FF2CE2E3D6FCDEC8E047FE68CBF415
-:10E0A000A8F1D03F9F36BB66F1FCDDAD3FB3E05C2D
-:10E0B0005063F25970EEAC7E628705FEFF6BF7EE9F
-:10E0C000A0EF4BF656D0797B296BA473E4A76621A9
-:10E0D000A7153CAAA769DB1D7CDE998582BF568700
-:10E0E0008BFB2025C6A2637158EF5E2D17EBBDA9EF
-:10E0F00074BFA5827F7F57F2E1D0FDD1FBFADC929D
-:10E10000C1B02BB5093FE840FB619E7F24ED87B984
-:10E1100097D228BDE9D2D574AEFA3D2B1D457C229D
-:10E1200027E43CFBBA51D8CDDAC53EA8B6F8E3E601
-:10E13000629FBC6CA67D526F82ED1BE764C626F021
-:10E14000B4B4C8A8A3D7E5C5113A7A9ECF62757E4C
-:10E15000E59BD9105DFEA65919BAFAB7DC747508AB
-:10E16000FDE705CA898F4CD0DD5FA95FE3756A645E
-:10E17000479BA6FFCED3354467D7EBDAD7B33981B7
-:10E180007A3807EFFA2DC199B10E0BCE5BD5067127
-:10E190005F67BEA74B7EEFA4EF7C21BA7D382CC30E
-:10E1A000F59F422E9AC93EAFECD3F3F1FF19FDC99A
-:10E1B000458E68396EB451D8173C7ABDA383CE9F83
-:10E1C0004CE0A15EDA7BEAB385BDA7DEDB6169B412
-:10E1D00013FC4DC91C240DAD1AD9F3787D6B72ACBC
-:10E1E000C8AFC1F703E6809D8589FE2EA1FC84B1EE
-:10E1F00002FB25B4BC81AF1B7A4603EC3564679AF9
-:10E20000F909D999D438B27F45A74BB7E9ED470D45
-:10E21000B0EB04E17359A193E8B566EFFEE3433830
-:10E220007CE696C6E4621FD5B5CD3657E45C496FEF
-:10E230008ACF5FAC3690DFBBF7F5A3446FBDD52620
-:10E24000A2EB6F824B835BD83543E970095F9795EA
-:10E250008FBFE480E6F269A21EE03304F419029F46
-:10E26000E47EE0A6E0D507BF90F2A5F89F02DC2788
-:10E27000D07CFEB4FEE012024F354E08BCD8383DCB
-:10E280003C96789C6F81FF2C396164BE6FB1FEA50E
-:10E290005827E6C1D78979CCB924EC26CA9F70F3F8
-:10E2A0002513E5FBE8A694C32B0FFB4EBF4FFBE8FD
-:10E2B000A854EC9B7997E2A9DDBF8A9EBE898ED4D3
-:10E2C000FC15DF0EECA3BB486E2C2F8C8CFB98B397
-:10E2D0000AFEFF85C417247F1D582FF50A3EEAD198
-:10E2E000CB9961778EA37B47BDF674D22BFAE4906D
-:10E2F000435FBE32323D01E51E69B753FCD823EBC4
-:10E30000A9712A78B97310E87A683CECB11BD6651C
-:10E31000A47606E92B9EF5E678D80B53D70EA2B467
-:10E32000C2E688871CA9586B2C857CFCF09E84F87B
-:10E3300071B0CFAF37C7CDE25D7F7847412A1B85EB
-:10E340007C09A5A73687CD0FB673AB745BA1D0430C
-:10E35000EBEF7C8FE4DA39C3EB51F3B1EFD63F1723
-:10E3600085AB37B5EBDF1EE3E02AC9DD319E870AB6
-:10E37000C98FBA638F037073EC180D3BF5CF6143FF
-:10E380001B1CD01F6AD69724C02E56F7B7A38F4107
-:10E39000EE7BD69AE3A17F7EF60E978B1AC935D213
-:10E3A0001B3EB5313A2F7DBA3BC207FFFDA71A735A
-:10E3B000C3BFB3CCF8CA68874ECEB6DF8C79EC4DBC
-:10E3C000F0FCBCB010E3FBF624627C9797EE677A12
-:10E3D000D60E8FEECF8EA2D2E5DB845EB747D97121
-:10E3E000A5BD17FA3CF2D0E7D908A1CF230F7D1EB7
-:10E3F00029F4797C3F26EDF8C35A7A72711EF54EE6
-:10E4000063D98D2477EDD9D0D75769E12ED2333532
-:10E410005702EC63EC9D18216F43F0ABD2493D5C91
-:10E42000E70AA2FB2997AC2CF89ED95416A3CB4F30
-:10E43000B726E9EA9738D274E5D7268ED4955FE7F8
-:10E44000CCD5E5BF933D5E57FF06D7545DFEBBE3D9
-:10E45000AED3D59FED9EADCBCF9DB940577F5E69C2
-:10E4600085AEFC96F9CB74E50B3C2B74F95BABEFF6
-:10E47000D0D5BFAD71ADAEDCCD1C26C8BD769CB38A
-:10E4800038DC5FC6398BA7ABDE186E0FC66BD17454
-:10E4900043637F76FAF3521F9A38D6FD19E823C5F5
-:10E4A00020E890A76EA81097A55C49667E4D9C73E6
-:10E4B0003B924037A1F542CB8B228E5C74721C2EAE
-:10E4C00039187BAB89F391A2B147F23378FE9931C9
-:10E4D0000B447EE29167D379FEE0C1ADB79A38FF75
-:10E4E00028BAE6C845948F1E5B2EF27319A91C4703
-:10E4F000C6FC6DA197AFA3684AFA2697B093F47B48
-:10E500004F53A58003EE37020E48FD9C3E911EE15D
-:10E51000F489F4554E9F5566C68E73FA447A829FED
-:10E5200037F1FD37FCBC89F4757EDE44FA263F6F77
-:10E5300022EDE0E74DA4BF6B9E4FE93BCD1E6AF78D
-:10E540006E7335A5EF3537D2F73F363751FA41B301
-:10E5500097BE278E5176053FD95F949FA901FE3D56
-:10E56000D8E70E99CF06FB61959F50F9055B1A59C4
-:10E570006704F669A729E6636BC0DF37309F35B1C2
-:10E580008F83F4B0CD89EE8C3134FE5007F97BE4F3
-:10E59000F769DADC14B8FE6E1DED193986E37B5E8F
-:10E5A0005EE5FA68CE3FA65C6E34835E7E2FEFA9EF
-:10E5B00086F67F59D249DC58F768B49B6C15F7F0A2
-:10E5C000265BC53DBBC9A6CE16F0A3962F9913F7BF
-:10E5D000685E89B4107F6AB9C7E4839D52FB82519B
-:10E5E0007E521CA37CCB971D742F6FB2C39548F24B
-:10E5F00046E6FBFCE7F80BBA2FA3FCD9EA9E4CF1E8
-:10E60000179DD3A1074CB25B9C6121FE77F8AD5FEB
-:10E61000897C57CD87613CE527DFF525F31B46074D
-:10E62000FCE193AD1D69B0134C5A6D7505DFFF51C8
-:10E630007E6FED8B0E23E489BAE7A3C651F38D34C8
-:10E64000F1FEF202F778263BDA7271AFA1A5DE4E39
-:10E65000FD25F0EF963CAAE73652BBB65CD8812781
-:10E66000D5D95DB06F2B7F7B825C37AF47EB2CFE3B
-:10E67000C243F70D26C9FB06E8C72ACABDE86752A0
-:10E680009C3FC984F5375A5CB0873EAAF1F6790100
-:10E69000FF3FEA4704ED5FCC13FD66FE85CF177A96
-:10E6A000BBDB4DF09DABCE6F4E9997F29959A79178
-:10E6B000FDCA28F3BF1DED590EBC978639FE1441E3
-:10E6C000FB3C2305768ED9526FFF1A7A59FD3F43E2
-:10E6D0002F6E81EFA18CEC69A174A3F0A2F03C1025
-:10E6E0001D29BC07DDD7223CF7DDBF92FD84D2D7C0
-:10E6F0004074A5E869B255E01D78C53D1A4547DA72
-:10E70000176D3B681D755692738A8E42E9E04A3A4E
-:10E710001274D9F23D2BF577251D05F00F78FCF327
-:10E7200074D46184DCFD47E9E7F61E36239A17DDD1
-:10E730007B8DE732E446C525E771E42BD9D4192057
-:10E740002955FE00CA075F591E4A5FAAFE8B03F4D3
-:10E75000E7F9A2C71C1D449793A40CFCC300F55F06
-:10E7600093F7E25FB3A9FB1E6E7B2EA783E9920F9E
-:10E77000AF2A11F43533CD48FE8CE9394B49BF67D8
-:10E7800076A11F3BF93F646F93FEF5EB65BB1997CC
-:10E790004BD7619C19717AFDFB7AA977CF0CF1B741
-:10E7A0005F9F732DE9E1D787E8D9EF8D917A741ACD
-:10E7B0004B13E7EB4DA4FF16CBFD982CF19DE134F4
-:10E7C000B2220EF712E6314108BC7ADEE2467FD76C
-:10E7D000322FE5AF633E4ABFC3FCA407DCC0050689
-:10E7E000F2DF658CEE8F1E8DB8B16C39EF6F7AFE5B
-:10E7F000F44C7CAFB3F6A45A0CB81DE8F90CF2A1A6
-:10E80000C1E8F933F4CC73299E11381F1F29769281
-:10E810001E76C49A417A21F69339C85EF96B2E4769
-:10E8200033B99C3BCAE52CD2635CCE667279F72B78
-:10E830002E6791BF3E7B2D43BB194EFDFD1ED5FEBD
-:10E840003B8EE9CC34686039F69DD12F0C851DEBE9
-:10E85000B59811C5C0DB6B31638BB1DED762120C8A
-:10E86000220DB3503AEAF9CCFEF45645AF81F16679
-:10E87000D078A1F055F00C85A382EF3F01CF416322
-:10E880000BAF84E765E8F7B09F5ADF8E4A4C879F4D
-:10E8900051C6D345083E58FFFCA804ACA3CE2AE0DD
-:10E8A00032A96922A5939BC633533EF999BC80EFE8
-:10E8B0006758020CCE217636669A46F9EF49DACAD5
-:10E8C0004EF00CC73CCEE6F9B3B846C63ED9DE12D0
-:10E8D00085FB99E79E31BA70AEA9333A37B9602704
-:10E8E0007FCD28E2822E1F4D857F93EDEAFFBE7417
-:10E8F0009D55C1CF4B70FDD9356EDA6F0CDED9F85E
-:10E90000805E33344CDC3326F742DEC07ACE98701A
-:10E91000C167868609FEA8F0C5DB09B9CBFB19C320
-:10E92000F95AF2FDE174AE2918E62EC27AF879811F
-:10E93000E28A7AB323C85EF11B199738D97F35C5AF
-:10E94000E5CDC4B99D7F378647EDC4BEFF8D8C4BA6
-:10E95000FCC520CFB5687F6D5A5E22E0318509BFC6
-:10E96000CA7556B3CBCFE774DD58B90F47B3D13270
-:10E97000AE4777FE507692DE3823C9A1C92CEB2131
-:10E98000D8098A4F98C94ED077DF2D51F8457B4F73
-:10E990005C3482AF94446A6C505A203E272CD1C01C
-:10E9A0009C417ABBCD19CE9C41FB23223B56978FCD
-:10E9B000740DD1D58F1E97AE2B8F715FA52B1F3491
-:10E9C000334F971F5C3A41573F61FE345D3EC97338
-:10E9D000BDAE7E72F51C5D5EF1BD64F189A5342E7D
-:10E9E000D4B51FD6B448573FCD5BA32B5778605E94
-:10E9F0007747763CF8A2F8CBD8B85257EFA7512208
-:10EA0000DE64A67DC92CECF7E1AD3FD0CFCBF8BAE0
-:10EA100046F1A34EC16FBDFC1FD05149A29EFF4ECF
-:10EA200077E8ED1AC98D265D7EC33F8A67CF553AD8
-:10EA30003C87C283E3DDE5477D2EBFBD3C5FF2EB43
-:10EA40004A13F40BF82F82E70FFF45F07AE1BF0875
-:10EA5000CEC37F115C1FFE8BE072F82F82CBF34F89
-:10EA6000E8F15CD8A1C7F3D8F7F47856F437103E34
-:10EA7000C677EAE920141F133F0DA10B8987F9FC23
-:10EA80009FFEF04047114EFFD31B19D9E7BE092F57
-:10EA90002F84E065D2484F3BF6EBFC4117532DC065
-:10EAA000538F6704CE939F493B49E83D4E2F57074C
-:10EAB000280EE107468ABF396968D5C097FD299EAF
-:10EAC000636379FDDB731A897E1259E9FE257C3E6A
-:10EAD000E5FF11467E9CF261225E97E574529C83AD
-:10EAE000E277E5C9E21ED11B63E5F9CD25EE13758A
-:10EAF0008C15FA6CA4CB41F78E2B72441C073F7621
-:10EB0000A5968F02FDBC6E1B017AD822FC269D883B
-:10EB1000178E0BC40B43DF847E9722F5AB963F58CC
-:10EB2000AD58C7886D4C272747FAACBA7BAF57EF73
-:10EB300075E8F2A3DA1275F5AF39E4D495E7FAB3C4
-:10EB400075E5F9275CBA7C61C7385DFDB1EFB97531
-:10EB5000F9F19D3375F5277E5AAACB27B39E87011D
-:10EB6000DF619A38EF5B395FA27B604E110F547EF4
-:10EB7000778C8803957600A54FABFBD01E4977A113
-:10EB80007AFA308BD0535B9298388759E5798BE9C4
-:10EB9000F5758FBCCFACF454E6D5DF6756F798FB1C
-:10EBA000F47AA9B72BFD38E81EB33BF81E73B98C75
-:10EBB000DF0E957F71E3847D2F74FEC32C62BD2D23
-:10EBC0007758286E44CD2B743ECBF304DDEEB6F6B9
-:10EBD0001FBF933E4EA3FE8B724B878CE3F51E3313
-:10EBE000BB7C6447B9623C57A717E7CA1F595C77DB
-:10EBF00039BF79BCF26BC47ACA0C86DB67E7D07D7B
-:10EC0000B1F9BF0C1A3F6F9CA0EFF8095ABFEB2B6C
-:10EC10008F16F7B958B4C509FA1D783C01CF440BDB
-:10EC20005B477146F2DEFF6D9BDAEE1BC18BCA2C8F
-:10EC3000AD66325E309F19F4306B1AD7A772611738
-:10EC40007CF1113BD7371E6B32919D67FCB8616533
-:10EC50005C13EB8BE318C6CF1BA00FE82C38A73C46
-:10EC600039DE48E32C1C27D65762BCDC77FF9EFCBC
-:10EC7000178C49FECDE83E4C3FF44674A8D6F1AF60
-:10EC8000BA8FAFE836144EEA7CC9A4DCC994F352BB
-:10EC9000F053FB41C14FC5433857984B77DA29AE43
-:10ECA0006226EE9129FCBD3C5EF0A34D8047A1A8F1
-:10ECB000077E3450BD12634E34ECE1BDCC19EDF843
-:10ECC0001A7BEFBF304E81E03F507CD540FCE10A1B
-:10ECD000BE3040BCD540F4497FFF40DC55107F106A
-:10ECE000F77A243E7C9906F2A3DF1DA9DFC72F8C9B
-:10ECF00013F0F5C87DCCE5AB3D57CF2718ECF72DC9
-:10ED0000EB8D924F08B90A7D03DF17AF3793BEC171
-:10ED100058E956C4117DB4C54CF75B27BB9D335CE5
-:10ED2000C23F4F7A07F9BDF8D42ABC7A79CAE5FB0D
-:10ED30004EE8C153986B03FC19951BF5E54BED3379
-:10ED40003E833C5F1C722E5D2ACFAB4B43CEA54F5A
-:10ED50008D93F2D8C55CA427493F7FB5ACD3474714
-:10ED6000BE8C686977A1FDC953BA17A6E0E284BFDB
-:10ED7000263F90E7F00BCF869C5E67EAF7BE5E1FEA
-:10ED8000FC06B88F7016F7119CD8EFBD146FD57BB9
-:10ED9000C026FC94CA1F24EB9FF55EA472D4476F73
-:10EDA000E7723B46430FE9F31F85F8A17AED86A889
-:10EDB00071E86F9F99FA53F72D6AFEEA1BED08F28E
-:10EDC000277B3A8DBAFB2D57CC7FED7374FFE2EEB3
-:10EDD00018CF3BE0E3674C2E2BF0778FFD483CE2E9
-:10EDE000E46749BB4DE87CFBF4CE224DF861BD22BF
-:10EDF0006EB677A646F700381F64D837EADEC06CD7
-:10EE0000E68F43AAFC319E8DE309CECA1F53E11F52
-:10EE10004FF39CD7B2D41CCEAB743EBCA624DC19F5
-:10EE2000F0D374A6887B3F03F96BE65ECAA5FE6E3D
-:10EE3000BA3491FAB9382E4DE85DEBEE5B013ABA7F
-:10EE40006A2F33639D9D21F7DE555A29F98D77BCD2
-:10EE5000E2D3F23ED15A8DE87CA5C6D4FD22E2D39E
-:10EE60002A7FB155E64B447ED57A91EF348B776695
-:10EE7000F6487B03D68914EBC1B9789FB447601D6F
-:10EE800048B10E7C075F421E7C0979F025E4C197EA
-:10EE900090822FE1FB22569A9A6B147EA5E2A07D08
-:10EEA00003BF527190DE03BF52701E7EA5E0FAF0E0
-:10EEB0002B0597C3AF145C0EBF52701E7EA5E0FAFF
-:10EEC000F02B05E7D9B8EB0279F031F76C5D7E2EB7
-:10EED000D7BF8B83F62DFC4AC1FDC3AFA4EBCFB3E4
-:10EEE00042D7FE56D6A46B0FBF5270FDDB9B349DFC
-:10EEF000DFE976F91E40E5B641441F2F8D2E758D52
-:10EF0000E7FBF5CF117FFB9E19E70063FB32D0EDE5
-:10EF1000CAFA7097C073EB4C8177031378EE5940AF
-:10EF2000785E6311F91271FFB83FFF4DB159F86F68
-:10EF300090C27F8314FE1BA4F0DF140F17FE1BA4E6
-:10EF4000F0DFE03BFC3748E1BF410AFF0D52F86FAC
-:10EF500090C27F8314FE1BB483FF0629FC37F80E92
-:10EF6000FF0D52F86FF0FD24FC4841EF66404FCF93
-:10EF7000D49DEB381DEACE750E5D1E7A7A707DE861
-:10EF8000E9C1E5D0D383CBA1A707E7A1A707D7871E
-:10EF90009E1E9C5F3DCE49FC12FA7A703BE8EBC1A5
-:10EFA000F951ADDE63B01DDDB0FDFCAB483B23B5D0
-:10EFB000C734CE0A56BC70A00C7EB64E9B961AC3C0
-:10EFC00039A5597BB1AC98E73DF21EDF68D66300E6
-:10EFD000BEC9CFCEF1E6F133BA773CEAAB242A576B
-:10EFE0007E5DFAE378CF3DC048EF3F26E33D557B99
-:10EFF00017731891AAFA817CFFF542C757F5885F0D
-:10F0000006CD831F0C7371CF24778D3D0FF7E5F785
-:10F01000183471DFF42E71DF3794AE764BBEB4C76F
-:10F02000B0FF4838EE0F55682EC4316499D8097383
-:10F030001EE0D49807FDE0BEF131725D8D1370FFC4
-:10F0400048CD5BD901399FA0F8B5A21E66A9E2E3BD
-:10F050004CFA82591683BF5B845E8076382F5EED52
-:10F06000D5DC3B83E8FBA1F142BE79BC2B2654F1F1
-:10F07000EF57EF6B9C80B8B859E1A2DDCF1F8F220C
-:10F0800038DEB84EDB89F8C3A27DCC8D78579F9CC3
-:10F09000F7D5FB1C962A1AD741F174AADF8AEDA98D
-:10F0A00014FF57C13A8B115FC10A3406FFA8821BB7
-:10F0B0005FDFAB585F16DF2A66D23F455C4EB88CE7
-:10F0C000CB51F1386131A555905B2A2E6752414CE6
-:10F0D00009EEC5B176E64218F00D0515EB07F3FE13
-:10F0E0003D3EB70BF78A267DD1788CF2BB4A294F7B
-:10F0F000643086C621B936C2ABD1FB1A377A77188D
-:10F10000E29C88D75D6B8E47FD7DCC0575878B1A99
-:10F110008A3B55F3CB611D069B06BCB3A38382E8F3
-:10F120008873809B80F75C9799DEDF986D7298C139
-:10F130003742E5F895F71643F48490FB252D6BDEF6
-:10F140004B35A6E37E89C1E507DF7A2E82F405A55B
-:10F15000EF54C8FB6617D71D1B7C0B2FAFD82FF4BD
-:10F1600003CF368DF89FBA6F529FE14B35405F1841
-:10F17000B26374AC51C87FF0C533DE676FC616AD9D
-:10F18000587F8CE2222AD617468BB828E187A892AE
-:10F1900070AA92F78A588E231E7AE6879CEFB847AA
-:10F1A000D0BDC4688A2B6C15FA9CB2B7287D50BDBF
-:10F1B0001F53F146FE71E0BDE251F92ECBC60A8A1B
-:10F1C000BF0ABDE7532BF5BD65EBCC747F6859884A
-:10F1D0003E582BEF0BD586E883E7C687E883F2FC21
-:10F1E000A2EEF356BC71741EE92B8D66F2CB95AD81
-:10F1F00015FA0BDBCF7C8867285B3BDD807743CA41
-:10F200009E73BBB47EE8E42DA9C7CCEAB4115CE7D9
-:10F210005C4AA6F4E64B4994DE7249DCA344EC0B4D
-:10F22000E8A0F305467AF4DB526F99877B9588470F
-:10F23000F486C9FB938CF4A65CE62801FFB8CAAD3E
-:10F240001D85DA37CBEC598F7B9BB376308A3FBA7A
-:10F2500001FA0DE2BFA0EFC0EE5E90564271183386
-:10F26000358A67B9A16085A46F4EEF0CF4EE95F472
-:10F270005B4AF93EB920E9DCE3ED3201EE3778353F
-:10F280000BDEE1F3C873ACA2E3507A2F8F90F62720
-:10F29000BBB02FF5D99F30593C6AE38DBE0DF75BAB
-:10F2A000CB61B31BC204E239CC237344F98817A3A2
-:10F2B0006F5B8743CDFFA35DA2CC6010F14E5CDF96
-:10F2C000025FBD6D75AE6551107FF962E2B419132E
-:10F2D0000B03785F1412A7B7F29EE1095F172F5A4C
-:10F2E000C9E18C7D521EDDF93D4EA1ECDA09CC5D01
-:10F2F000CCCFAC0B18538FF7F8712F70A1CCAF7E29
-:10F3000071DC9F36DA093E949F3E21F5362FF15588
-:10F31000C1B76E05DF32825F79A64E207ED53903F4
-:10F32000F888C8E991EF1048B9146287583DC1299F
-:10F33000D61B628FA8CC11FC9C999CA9B7525CB0DB
-:10F3400093EC796AFE1F9AF5719A7D7E9109529E1F
-:10F3500034FF6BE21BFE2BC3731BD6B7D520E2E64E
-:10F3600087185B99B40BD1FE57FC83C9772402F848
-:10F37000E77A1AF9D1354730FE3D1B3511A73E809B
-:10F38000FD8665F73CBC1BF6BB660B439CEBE35963
-:10F39000828E1EFF8185F4F0324BC731BC93A5E00D
-:10F3A000F87ED3BF9BC92ECFFCC3F1FED7C2469BCC
-:10F3B0000BFCF98B89A5AB30EF881C17E16306DFE6
-:10F3C00066E8FF644AE9F7095F9B5E790C71FBCB45
-:10F3D000DBD3288EB4E250EE06BC27F2C544CF0F33
-:10F3E00027C08F6B775820C71BD6C5905C2B4F90DA
-:10F3F000719DAC87FC540AFE0F4C10F6ABEB8A04EF
-:10F400001D77CBF30818E66C5D3D798F3B649F2830
-:10F41000BB60A87D21F41D8781F68FB223C06E608A
-:10F4200009B22B2ABB8439FBC30590A365167DFC6A
-:10F43000A14A5F557637791E5CDC27C77266244087
-:10F440006FDEAC3920C7AAECCE5BC6F37CD509339E
-:10F450006E60B259B14EF17EC73DE2FD8E457CBF74
-:10F4600082DF94C9FB5855DBC6D37EABF2F1347F03
-:10F47000E07D79EBE6A3292F807EFC6E8ACBAF720C
-:10F48000B82DB141FBBEB255D3C5F5ABFC8109C265
-:10F490000E57C6D574C0EFB6D56916BCA153C6D5F4
-:10F4A0000BDCEF7B7582531757CDEBD1BD8659E945
-:10F4B000ECB8783F89CF3B4D8C9717D4FFA256FD0F
-:10F4C000FB04BC3EE9452F4F8824FC5538F8BAD3DD
-:10F4D000903A689E1C0E04A79EFB787F4E1A87F018
-:10F4E00051E9F79971EE2EC37D0A9E5FE8F09931DC
-:10F4F000CEA275E2BD10CF26318E67638C6514F401
-:10F500002693C39202F8E1B01C47F3233E58C5E1AD
-:10F5100082782B1577190A9F0A39DFAAD618BD3EC3
-:10F52000D6BAD90C7C2C18E0BD821E49B78BD64DBB
-:10F53000A578F32A939BE2193C12BE1FADB0DD0BF8
-:10F54000BFC0822D0F99D370CE9E20ECCF3D72DFCD
-:10F55000CD4AF70FA7778156D85C98E702472BADC5
-:10F56000AF0FBE0F727868787FA694E0CBE9C28BAC
-:10F57000FB79555BF4F80CCC47C0B76A4B05EDB787
-:10F5800025268FC5113C8F6DAF0CC73D94057C7F40
-:10F59000E3BD23E6F0507CD3C70FDE924AEBE4F3E1
-:10F5A000A47B502EE70CBCF3C3E984E858D18B8AC6
-:10F5B000CB56E359278AB84CEBC46FDA976ED26BFF
-:10F5C0005A387E61EF1E685F5A10D8C5C7B5548996
-:10F5D000F7D742F7A9DA9F6A5FAA7DAAF6EF63E63A
-:10F5E000527FA216E0335CDE36FEB21F38CD90F3B8
-:10F5F0005D28F1CAE1FA6A701CD73513055ECBD2DB
-:10F60000F5FB1DFDA1DF948962BF974DF30F47DC29
-:10F61000A5AAAFC62D8B15ED40F7A0B7948986BE7D
-:10F62000FA2BA9BE3E1EA5B28F5FEC5B1F0F7EB109
-:10F630005F23BD77E57D4753FE0DFAECD3429F3D36
-:10F6400053B7BB21097AA3C9971AFC2E56955FF0D0
-:10F6500087C55CFF01BF5822E5747B9E276762D097
-:10F66000FEAD7AE0E92C8FE02F7EF0970F9E7EE9C9
-:10F67000F7139C01F9A9E6BF68E36FCD15F6607832
-:10F6800089F5DD9BDD4B717695768B13F7972BD73C
-:10F690005510BF6589FC5CA105F01D4A0715EB34C8
-:10F6A0007A5FACB2698CCFF83FC8972B37CDA637BD
-:10F6B00091149ED47B274A9EAAF97F57CE7FA1A49E
-:10F6C000E33913C5FE5B589D665942FB3ECD520996
-:10F6D000FA97E50BAAF4DFFBF0D4E75FCED980FD03
-:10F6E00081B8213A9F6C320B3BDFBE48D257CFAC7A
-:10F6F0007CFECD9B79BDCFB7EE48857EA2E6B154A6
-:10F70000DAF3164BBBDC12A9B7723C5504E369E986
-:10F71000E3024F95CFBCF127BCCB55962EF9D97D8E
-:10F72000229E7F51DB7EC2DB828D9BCD69BCDE8A4F
-:10F730008969BA7B32958DFCA0CBE1B970E30E33B9
-:10F74000F8C08A89026EA1F45E26EFFB2AB842EE69
-:10F7500068417E0B551FFC6F3F1F67F50A5B14EC79
-:10F76000D36A9C47245D5736C6C462BCCAC68A9F0A
-:10F77000E0DCA1F87DE8BE3B6513FB6111EF0FFBF8
-:10F78000F2D45417C535C3AFD59F5CDD2CF1F653C9
-:10F79000B378BF3139A2ED09C0217979B80BFC21CA
-:10F7A00033B393FCC6A067CCDB6210EF3D66D67521
-:10F7B0005EC03CB84A4DF75390E29D29A8D8F13C71
-:10F7C000BFD320E2AFD28D227D5EC28797FB51CEA0
-:10F7D000E23AE9DDB9BE779342E8D5C2766DC47BE3
-:10F7E000379638E66A7106E853F5A3E853D1EF403F
-:10F7F000EBFB85E423DFB4BE5369D21E91ED4A458D
-:10F800009C4AF9FD235CB0CF7CD33A2DF2FDC1BEFA
-:10F81000F572621D17DBCF7A33C5B965E0F56E2945
-:10F8200089EF67BDA1EB54FB44DD69EFF32FB40A08
-:10F83000FFC2298DCB2FDEEED40A1BDDFF52EB5227
-:10F84000F6EF6F1B87F0F6C458694FE88C841E5999
-:10F85000162EF7BF5FE4F17D76D07725F7D57B6D67
-:10F860008A3F9F6E94729175DE87FDCC9A32E87D57
-:10F870009293ADA722F15ECAA9A9627EAADD6AB3FE
-:10F88000883366911627DE3FE4E7AB934DF0FBAC7F
-:10F890004BA073E46D4D19C4176EF3C608FB83D4F7
-:10F8A000EF97483E18B1BA6203DEF95EBC2DCDA1D8
-:10F8B000F17116DB5D1F6FA3F657BBA00F466C9965
-:10F8C0006D4927BD579C03949F68B5C64A296E0CA5
-:10F8D0007C12FBCBF04A26E4CED26DE21C30CBC0CA
-:10F8E00036C24F38ACA5744612F8C4C31AC599B3D2
-:10F8F000EDFA77ACC6E6979EA7F35FC83B70ABCD39
-:10F900006DEE04F071AE6FC0DEB4D85E4A7A7BBD96
-:10F91000E49327B774D17BF40AAE57C4FF58441C54
-:10F92000704FA481EC70DF360EA84AFA9514DD28DA
-:10F93000BFD423F8CF78C0C94872ADC45846EF2968
-:10F940006DD8329DD2AACD255BBDA3107F5C1A3F36
-:10F9500081E66D263B5955FD7411AFBB332C06E78C
-:10F960009B54B33735582FADDA7137C5FF7CBAC316
-:10F9700046F13FC58ED9C53171F4DE31C5D7A97ABC
-:10F98000A94582EFD4D44FD7C5EF2CE67DE29DCDBB
-:10F990002FDB22E87E988ACBA94BF024150D16F1B7
-:10F9A00039E39D222E2789EA3BFBB58BABF4E36656
-:10F9B00011E711146F74E302DEBEAEFED928F453D2
-:10F9C000FBE0DB631C06B2430D47FF7DF146DB44E1
-:10F9D000BC51963C2FCD8A2DBD7901E0FF6B23C130
-:10F9E0007FA0F1AA0F693A3FDE6DBE68D25B3D7E13
-:10F9F00066811FD9E360A4177F6A644DD00394FE2B
-:10FA0000A2BE8F9770F934BA3515F4B16CCF43A903
-:10FA1000902F9F458A7CD99E5B7E037EE5D9152673
-:10FA2000F47313237DB8D22BF46B561DABDE23B5D4
-:10FA300095733A9A5E1421DE3DDAA68F3757EFDCD4
-:10FA40007E6612EFF320DE08F4FEBEC9BF18F87D13
-:10FA50009FEBAF38C7A61609FA7CBFD53883EE0DE9
-:10FA6000F18D023DE4FDD66723110FADF4B512E32D
-:10FA7000076EBCFFB3F23911178CF7E9E9AD506995
-:10FA80000769907690952F986724C791FE455FEAA5
-:10FA90004C7E4B7FF8AB91FA555FFEC07E3AB7D5EE
-:10FAA000ED13FA435D5B17E90F4A1F517187B5FBF0
-:10FAB000BA489F50ED1A0E08B8D41F10DF2BB20DB4
-:10FAC000CA8EE2D632719ED628EF7D31BF7CAD2939
-:10FAD000389F57BE16CC7E82B28FF4903E786FF678
-:10FAE000EFE81C5EBF4EF6CBF3E6A0F1AA414485D9
-:10FAF000E27B861DED9DBAF35DFD81186AEFAF0FC5
-:10FB0000DF0839EF6EB09B90B6D4DB49EE6F6F34EF
-:10FB100064E39EBA5B0B77418F6B97F7B706D7BE4E
-:10FB20006B83FD2089F51CC57BBBFE14CF0F8B7842
-:10FB3000BF0978DDC5188827EA3EFC493EFA9F3C9C
-:10FB4000ACF322DED4306B53CAE1A7682992EBC82C
-:10FB5000E9CC075D0F3E22F8F3A366B691DE6D3661
-:10FB60009532D8EFFDD2BFE8FDCA40EFCFB66BFEAD
-:10FB70009F05EB5787247D9686093FE3CED19E4DA6
-:10FB800098C77735F3A85CBA77681C8EFEBBA51FB3
-:10FB900052E9A9D3247F4E91E72BCB90443BE85800
-:10FBA000DDB7D3DC6E8AF7BC2BE74825E4F38F7B07
-:10FBB000AC142F30AD279CF4D6942133499EA977FD
-:10FBC000DB35A78995F1FA47720C7EC4C5FD9859BB
-:10FBD000C5BD006B887E6BB0D1FD64ADFD575F8104
-:10FBE000AF271B2F1C8DC67DD97FD3E8FDD1F2DE58
-:10FBF0008F1F7D8BE13CECCBA578E814CF1EACE7E2
-:10FC000064EFCC2E0F47DD8F1D6D569790172C7823
-:10FC10001DED777C15156B08CCAFBBE7637AD7B1C8
-:10FC2000BBC74A76DB69EDF29DC390F974273AE9C8
-:10FC30009E34AF47FA66B7DD40EFBB4D6B3F4AEFEE
-:10FC4000154E53EF195AF5EF1932674A0CECCA6496
-:10FC50004BE5CA417C8BC0DFE468FD79F1B522A198
-:10FC60002FBE56A4F5FBDEBD8A5B5172E565FB9E97
-:10FC7000DB845D4AECD3E5CACF7F299DF489DEF6AB
-:10FC80008CAF7DC7E26DE8155C5FB8708DFBEDA2AF
-:10FC9000C2805C9D27E1A4E4B38A5B9827E135CF5D
-:10FCA0006E10F009F9DD154537A17411C0BB88F756
-:10FCB00052F8643FE83886782C8EC751F733C2DF9C
-:10FCC00049C2DF57AFAFC7B30B438CEE2E4FDABF3D
-:10FCD000047FF47EF7B7C65F4728FEFCB611D02339
-:10FCE0001E34901EA1EE3B7AE47BEDEADE23CB6668
-:10FCF000C40FCA8DE1642FF4C877DA391F38063E85
-:10FD0000A0F6FFB0999DA320474FF2233AE6D769AA
-:10FD100068A3EFA993D269BF0E651D49F27E4E21FB
-:10FD2000F43763E07D6AA2FB16CDF7F012DCBF9CCE
-:10FD300067A77BEEDDBE90F7A9E53BE6DD4CF287D9
-:10FD4000F9EA1D73BE9F79BB2D0B4479DF3BE6C3F7
-:10FD5000199DA3B6E4B22CE85FEA777F067CC77CE6
-:10FD6000592CD94D1F79C43712F240BD5F3D25C5CE
-:10FD7000933869F095EF576FD54A17E07760BCA3C9
-:10FD8000C47C3B17843FB34780DB0F7BCFC9A648B9
-:10FD90007AB75BD1A9B2730FF3763D0C38A9B8DA04
-:10FDA0003F4B7A53F05771857121785074E73533A2
-:10FDB0008AC3053E1067D4F7FB316B247F51719DD8
-:10FDC0002FBB9C487F9CEAC99D847DB882C399EC77
-:10FDD000E89DDFC37A1FBD23D28DF99D94BF6B11BF
-:10FDE000BAAF8A261994BF98E206CAA57C2B577130
-:10FDF000024DFA3881D0774EC387964E06DCCE6925
-:10FE00006F8FC1C7D7FF8FB1DFFB27D74E127C2280
-:10FE100033D1336312C9B9693A7DF2F5DC4F52E848
-:10FE200077662E1F1D0AF9774B4AE975E8D79629A0
-:10FE3000FC077F4EEAA4388F3F2FF86B0AD99FD773
-:10FE400088F759BFED3CAF8C6B16F4B06AB1B89728
-:10FE500098CC1A898E1303F1B236CCE37F5B5C73C6
-:10FE600020EE782FFDBEC8CBCD6D19A787F783F79D
-:10FE7000B023CF3AF9C9C67BF8E5728AFB8D3EB252
-:10FE80002A8DE7371E3E5A4E71BEC9472EA671DC39
-:10FE9000DC7BF85591BFFAC845C4056F3A7C4CD459
-:10FEA00087FF6008633F397CBCDCCBF171C768CF4A
-:10FEB000FDC0D7CD971A8F411CFF7EED9CC56914FC
-:10FEC000D73A3B255BC4B5AE03DEE7C52F5A1FAD5D
-:10FED00005E25AF74D12EDBA2F887DD07D41D079D9
-:10FEE00018F8C1E07F3E55F1BD8A0F0FC42FD53EF3
-:10FEF000FC57C527ABFDCCF6B8369A418CDE7F3A6D
-:10FF00006EF8C949B42E7DDC70B7B9E731F22B5DCC
-:10FF1000604EF0895722DF75425EB4148AB846AD50
-:10FF2000A7C389FB18450522DF72A1C3093E8F3C98
-:10FF3000EC5BDD3122DE51C5C5B65CF027619F1454
-:10FF4000217E91D72FEEE929071F2DC27DDE34F4E3
-:10FF50007FFCA81C8FA1BF5D1744DC61B7ADC3E96E
-:10FF600090E3A01F3E6E1AF863D16A2BDD3B6AB99D
-:10FF7000D0B882FA29B3F78DAB858C6BFDFA71A7E7
-:10FF80006B41E366F68AF84E8CEBD48DEBA7B86034
-:10FF9000DE1FC59F76C7B81271EE57F96294F3FC65
-:10FFA00043F2772A8A9C7E23E4808A934AB0C8F77A
-:10FFB000B8E5B985D7A3B8CC5DBD629DE79BFD359B
-:10FFC000D84FC5926F175B84DC64867017EE639719
-:10FFD000182F1F4FC6F9E405713E290E2BDD8EFD4B
-:10FFE000D86012FC86C5A9DF4BEB58F6735EEF773D
-:10FFF000F1C9F4FB6243130FB24C9C8F97CFCC81B5
-:020000023000CC
-:10000000DCE07AF719E0FB77AC5513BFC325DACFF4
-:100010009D1941F750BA0F8F28C4FE9913E67C8EC4
-:10002000F17DDB3BE92BDAA773A29D8538F1F41E45
-:10003000FE6F914F703E07FFAE957D45FAB9F2D73E
-:10004000DE12F0D7FE17C6A99F79CE22F4B31E7A2E
-:10005000A7F9BF2789F7E9B8FE4EFA47CF75F2DD59
-:10006000CD1C6721CA53CD3D51805BF7659378B7AE
-:1000700096F544DD14E49F7DAC5DBC671B4AD787D1
-:10008000270B39B03CD34EEF9D35245AAD94B65F63
-:100090009841BF07632ACDC4F9C06DE9DFEEF88B44
-:1000A000C9425EA56DB004FCEF5C7EB8C399CA7B03
-:1000B000D938C6767C3FBCEFFC051163192ECF639F
-:1000C000DEC4C78B4DBAFA6ED4EF2B67E29936D5F2
-:1000D0003EE765FBE3EB4C723CE07989B83F112ABF
-:1000E0002F1AA6C4F6BD57487237CE46F7AE328DEA
-:1000F000D29EC7EB3AC82E28FCB7C9FF61A338BA15
-:100100005D364187990691EE32C8785F69EF53E713
-:10011000981F4FF14C9A3298FAF1533FC6FDB9D06F
-:100120002B92581B8DAFF433558FEB61366232F250
-:10013000F7DE8A8C867EE1F9CEE4A9A5930B41D740
-:100140005EF651909C381F11D5148CBF06A3DEEECD
-:10015000F9CEE469D44EB5AF6F9ACE3EA278443F53
-:10016000D14F7DA681CEAD0D46F62AFDEE00EB20E7
-:100170007FA66AF72EE7931FD1BB0D6E4ADFE3FC23
-:10018000F223BAEF379FD20F9A3DF4FD647335A581
-:100190009DCD8DF4FDC3E6264A6FBE35B200F4BF97
-:1001A000FCD05AF651907CAC6F337B82EFD7BC3BCE
-:1001B000B57F3AFAFE64E1B77937ADFFF2FB55F946
-:1001C0006481CFEEC542CFE474B9CE113BB0BED04E
-:1001D0001D29EE25BC344D9C5FBB9344BE71B278A3
-:1001E0002FD46D60DBD0FEA56916CABF9B6EA077C9
-:1001F0001DDCB1A2DF77B30CA4A75D3F636A03E007
-:10020000E48EE7DFF302F977AF12E5EE21E2BB9A65
-:10021000AF2A9F34A5CF8E9025CEC7C2FFCEE99DD1
-:10022000FAEFC36FB1985F687D759F3E141EBF954E
-:10023000FB96F605F477EC83B4A07DD1E0A47DA114
-:10024000E850D15FC314B15F33C3249D73D945F027
-:10025000830CC3F938C146FE4137FC177C3DBB64B3
-:10026000BCFB15FB41FA03D47E50FB40D17B32DF4F
-:1002700067C2DF21D631C9D8BF9DFEA1C962DD1D8D
-:10028000F191A41F77B79B1D9037938CC2EFD0DDFF
-:100290003EAF00F7C24BEEB637F6C7BFDE94EDFFB8
-:1002A0006938287E30001CAE58BF45DAEDFFC1F535
-:1002B000137F03DF5E2CEE6586D26BFB64657717D8
-:1002C00074FBCE64F741D04FB76633E19CD26DEB3F
-:1002D000FF1EF94BD3C4BE50F4D33085C97768F8FC
-:1002E0003A33AEE4776A3D7DEB5CCA88EF65CA7845
-:1002F000E350FCAA7505F1BDD7270F0EC09331AEB0
-:10030000AFF07E86D6D9E99CAAE8F7FCE0AF96402C
-:100310007ECD9FEC147E268351BE072BE449DF7708
-:10032000CD487157417286416FE9392CFC717E7E50
-:100330004E823F0B36E8E0B86BCB14B1EEDEF985A8
-:1003400006D809CEFFC5EE85DC3A3FA4E724F49237
-:10035000F3DBC47BE7BCC7591AEE8D20FEC789DFEB
-:100360006D117E10E3C35F9E843EB4E46123E92FE8
-:10037000E7716CE6ED963F287EE74EDD1FAC93ED0E
-:100380005AB65DBC997EDF8CD327F49F8F6C0DE944
-:10039000D08BA73FFCE009BCBFBEE4390DE6667612
-:1003A0001476779EFF78AF51FCCEAA8C3B9921EF53
-:1003B000F7D7EC16F7FBEB106F02FDE5C08EADF83A
-:1003C000FDC9FABD6666E3DF67E09D343ECED2B676
-:1003D000487E90E4FD6ED1C78D5ECBBC1B604FAEF6
-:1003E000DEAEFF5EB34B9FAF0BB9B7A84D91BF67B1
-:1003F0003092E5D2FDC42DC25EACF8F695FAAE9708
-:10040000E0EB5EA9EEEB7E41EF7B1B0F7F99FAA13B
-:100410005DE467CB7C17CF9FFB52C05FC1AD41F25B
-:10042000FC7349ACA08DAFAFE1B0CD013B40C30B35
-:10043000C24E70BE2D9AE0BC3CBC93FC0AEC45A3B6
-:10044000037AD83D878C6457A86FB7FD0CBF4BDB90
-:10045000F09C46EFD5D61F0AF309F85C5882F2A546
-:10046000876C0E27CA5F0C63B03F9FE778C3BDD887
-:10047000F3299D847FE0157609FE370BBF5FA1F05D
-:100480006F7C58F893973C21F1B36D9589F0EAD3CE
-:100490005842DA95785278FE95E1A93E3CA1DDF408
-:1004A000877F7F5CE29D21DEE6E8B64AFA5D0C8537
-:1004B0006FCBE18F52A1F72A3C1B399E7FA8DA3B14
-:1004C000E57B785F83E76AE0D9FE8FE3F98F908F51
-:1004D00085A4F77EFC53E8BD9116F2A32BBB86B230
-:1004E0005B0CAE7DF7581C1F7878E2B3A4E796C783
-:1004F0009EA95FC1C88E76ED14D8D1AE7B033FEBC9
-:10050000CB7E77FD53B9A08F167327FD6E8C3746CF
-:10051000BC2BDF9D367BFBF37CBCE2D8AF52F7638C
-:10052000DFBC1C46EE93B9725FE2CF1AFC2E60BBB3
-:100530008DEC6DF5ED61C2BE7640EF3FEB4E12BF24
-:10054000D35762E9295F01BD9CF78771D479B0B6B2
-:100550005DFEFE8B3CBFD52A3BC3BE90F7A11C6F4E
-:1005600050BDBA2922DE36236192137CA86501F3BF
-:1005700084677C1DBF67C4EFD5EFE50DA8070EC0EB
-:10058000F795FEC7BC7A3B87E23F4BE5EF4BF6EDB4
-:100590000F99AF5EEB8DB21A89EEE8DD86BA47C5DA
-:1005A000EF2B7E02BA8B0AD053838C4F3BF6FDDFD4
-:1005B00098F03B4DDDBBC4FD08CE21B7E29EFED9CD
-:1005C00036110F5753D035C6EFC4EF74083EB46CE4
-:1005D0009FE673A6F54347CCB741BC6B1F424FFB68
-:1005E000BEFEDDC37B037C64D4DF393C77943029C5
-:1005F000B7BCFDC64FF6C9AF90DFF1F8DF16CFDD0F
-:100600009BC3D7F335FEC66B13F5EFB85CE7D4FF99
-:100610004ED377B2F5BFD3D46B97F091FAA0D253F3
-:100620000F4D11723C3455F0BDC1A51F479D8BBFC6
-:100630003B4E3FDE6CB77EBC6F8B977F555CEB37D4
-:10064000C1EFB81CF7841CF73772DC7F164E2A1DE9
-:1006500068BCFF5FD3FF0B8D21EA0800800000001B
-:100660001F8B080000000000000BB55B0B7C94D5CD
-:1006700095BFDF7CF3CC7308210904C224242160D8
-:10068000880324542B94C9D300D6065C2D688401BA
-:1006900052C83B80B5D2D6FE3208222F5BA8D1A229
-:1006A000224E82E1A1613B118289863A286411AD14
-:1006B0001B698BFDFD56DCF828F23213A374E55755
-:1006C0005DF6FCCFFD3E321942B5DDDDE4A737E72C
-:1006D000BEBE73CFFB9C7BA929CE317C394588DC1B
-:1006E0009873E69E08215CAB7A8A12B385E87B4357
-:1006F000154D0E2184DB7BBC3E5688DA8EE16253B9
-:1007000032C1257D6F1A00B78DB36FA2F18DED7FD9
-:10071000781BE3BD07558785C65F6BFF280AFB5C26
-:10072000FC325C88E158F7519420B8FAB2C2F02646
-:100730001A77103CAB5515FE4CDACFE83363FC62F8
-:10074000AA0E7BCD82DA929656730FB5557B5B79F4
-:10075000FC0D9F69F0F8DEC641E376CCA7B6CAE887
-:100760008DB2537BBE5DDFCFCFF3AB53159717FD33
-:100770007BFF10B70CF35ADE895B4AED15FCCCBC4D
-:10078000B6FDF4D00B996E5A57D341FB440CEC5391
-:10079000D361D2608977756A6B510CD14BB4282232
-:1007A0008D9A8B62AB584DF4AC6A6FAE16D45F95E0
-:1007B000718F49105D023EB518DFA71F8388A375AE
-:1007C00076FA8BE877D1F779D452DAF755DFB1DBD7
-:1007D0005DD4063A5F8FC2770307697EE6003ED399
-:1007E0005D44BF1CB4662146D0BA83AF4739687CEC
-:1007F000A3EF75496FA39FCFFD9A0607A8653AB787
-:10080000AB7CEE8A2F55A6BFBEDFAD2E95F799D5EE
-:100810009E1689739DF4C9EFCD7539647FEAE23283
-:10082000E07F2261418E9ACC78BB000726CE69DE3C
-:1008300044A854F968DFCC6BE9B654DBB7CB24E6A7
-:10084000FBC0B7D4035DA3483E4E140F9F4C235703
-:10085000E7DDE332F0BC22B33B7505CD3B19E188FF
-:10086000B4D37E0F158F8B045F5F438BFEE25D6612
-:1008700037B59507E5F74EDABBA3206F270F4E5526
-:100880003DCAC07E776ADF15C2C3ED00DF3CCCA74E
-:10089000726F6304F619E09FEC9FEBB2F3FC13DE7A
-:1008A00077EEBA87CE773223DC09BE749945B98FCB
-:1008B000E5843E82EF752636820EFAF7E6821FB493
-:1008C0002E906160BEF6B69BB479F7348B41F34C41
-:1008D000CCB78BCF0DC6C7EEFDE097F7D0FCEA672B
-:1008E0005461A1EE6AD38A389CFF931D83F12BD704
-:1008F000E85C6DF2C7C505C96B75C7557D8960F9A0
-:10090000EED0F5C3C1FCD4F978324395782558BCB4
-:100910008250AE6E6D66B92675F3D8A6702BECD4F6
-:10092000268677272B74FEC407ACCEB584FF738A66
-:10093000366EA03686608384CDD45AA97DC624FB4A
-:10094000A1B6583F86D8A9106C2A1E976348A17D8E
-:10095000D4D6C9E0EBAB335D8FBA088FCD334B668D
-:10096000CC043EA26F99A06FD65C8AF08868210AF9
-:10097000D5F79EC077FB0F9A04EC478DB5A3F263C1
-:1009800092D37E27290AE1DDBFC3E4F5B0FCB9228A
-:100990009469422CBB49EACD270EF734751CCD5F14
-:1009A00063E0F355B7A85E1BCDEBAD271210C93F2E
-:1009B0006D4DFE01E4B5FAB86AB7D2B9F37DC9BF8F
-:1009C0009A0EB8C5E4B4D0FA5A1F75125CBB57F141
-:1009D0003AE4FE027A597313CBBA3863AB4D11591E
-:1009E000D4AEE93363DE99C38A788CE66D0E8B6AE8
-:1009F00002DE3599B3CF2951D4AA5BD627D27ECB5C
-:100A0000B79B3EECB1CAB557E8BFBACE6D2CB7154F
-:100A1000DEC1FD557B07C335C23800D3FECDF8E3F8
-:100A20006621DA5C91B1676EA0BF2788095754D060
-:100A3000697A3CF4E104F84AF2241A88D82385B88C
-:100A40006F92331E7ABFD1E8980D3A043A4D76D0B2
-:100A5000ABEEF0810AE0EDAD0E731AE8A8B5AB5F1E
-:100A600061BA06BE20BADF486D82E0F30784A46F46
-:100A7000A05DCA799D49F15AB19E68C8FB5915EF2E
-:100A80001A1A0A78FAA3D83E09510CBD58B520C7E6
-:100A9000003B07351684CAAF747D506C46251AADED
-:100AA000D4FFEF197BD4614176E23F5D298C7F81D1
-:100AB00059B87DD47F5FA4331A723FD61A9505BC0E
-:100AC000C65A93BCA0FB5863DF1A7C7FF328C5F19C
-:100AD000106D7D24EBE5C90AE0DA0827E4444958A3
-:100AE0006C043D368F5A6C84BC8FB5FB324A32079A
-:100AF000E0028C431F8497BF5714E136E23BCF8D51
-:100B000054FC06DA3F6023FCA02746BB09F8054CDD
-:100B1000121662CD20FCC82231FCFF8E9F9DF08B07
-:100B200018C08FF81D8DF59F67137DA84D9A2B4433
-:100B300037DB85156C17747A5E24792F205EA52922
-:100B4000526EAA771C29C2788DE85E8F754551F2E6
-:100B50001C45380FE030D9AAB9925FB95A7B7FAEF5
-:100B6000F42FBAFDECC8751973A9DD9E5B62465B74
-:100B7000A866C6F70C61EF5729569693CF49FF60D8
-:100B80008FEF5DA1D8533306E45BD7AB3AD97555E7
-:100B90007FAA7EBFCB2C52F0395777068D970BA9D1
-:100BA000D78B56DBECA9C17A043D237A94DB2B6EFC
-:100BB00013A46FEED571F6D4A9D4AF5E340BC89EE2
-:100BC000A65FB1F47B256508FDF285E865FB60D87A
-:100BD0006F9372EE8F54BC6B09FFD4DCC17A97A47B
-:100BE000E941A35BE1F3357E6564D853AA7841F30C
-:100BF0003BA973758C7638CC2BCFF5C23FDE4960AC
-:100C000029FA1B62594F7990ECD7BF68E7BCD3E84B
-:100C10003F02FB71CCE44BB6D3D0B11AAB13FB2F20
-:100C20001014E8905D2B15DDDC9E0AAF6DF3F3E642
-:100C30009E3190AF77DD1627E2B0C6754D91B0E3D7
-:100C400059629DFD4C06820AB1F7CAD4EBC7332422
-:100C500038E28CCE1738628A53C06F9DAFDB735D6C
-:100C600079B939D75F5FF5A7B6DBBF03FB757FB3F3
-:100C7000395E8A4977C6B401BEE97CAD131EC65BF6
-:100C8000E7D755FE11EEA3410FF5E25CB633CFAACC
-:100C900082E30A8D7F56FA1D8A7F3A7D676A7C5807
-:100CA000DE21ED51285F757AFF9036C4F7C98FEECB
-:100CB000607E080BDBBF50BE7F135F28C22CC5507F
-:100CC0007EAC45809F8906691F1397919C10DEF7C3
-:100CD00008F7E11E6AEF0A7FCBC472A8F1E75EF065
-:100CE00087A6BE2BBCDFCF48FEBFE34F476EC903CC
-:100CF000C17A18AA77D7D3B36A87F3DF75BF47964F
-:100D000086F42B443F43F44FE7977B7514EBD9559A
-:100D10003EAA2D525F357E45D0EF90FA863FE87BA4
-:100D200035ED8AD79FFC2DF44F21C4896F8F85E85C
-:100D30009DCE9FEBD91DDD4E9D16FE63763AFFA931
-:100D4000141907787E62F136034E3794C3EE9D9AEC
-:100D500028DB039A7D0B6D4F539CA3901FDB94718E
-:100D60007204FCF529B3BE8FCDDB4CF89F5ED33DFA
-:100D70006625AD3F9D2BDB53880B83605798580445
-:100D8000BB7E7AA4C5033A9D5626E4C13F9C561EFD
-:100D9000B85DC2F16607E005F17976824F99E47C8F
-:100DA000DDAFE8F6FFF482EF14F03C451C053D1C76
-:100DB0008A28E1EF284A4C31E173FAFEB4296BC569
-:100DC000C0F99B720DBCCEABD96FC283E9DEF7537D
-:100DD000C5DB445D8BE05208FFE4BCDF14A750FF85
-:100DE000FB3F1B3719FC75AD1AFC7DF8EBE41B01CA
-:100DF0006FE37DBEF7659F6971905FBAEA270B3E8E
-:100E000093FD653906E84BB9C64357CC8468F0A713
-:100E1000DF3B2E1A7E47F743FDC70F44B883F876B1
-:100E20008EFC94181F044F783429D88F1DD9BD39F2
-:100E30001DFB949B3D594EEA3FDBF87412E28DF2A4
-:100E4000DD8FA4731CBC7B633AF299F2A6CDE92E28
-:100E500086C3DD9C4F19E5B92FECBF79D7A6A0B8A2
-:100E6000BB2A5F65FC4BAD470AE16F67DFF0E9C362
-:100E7000769A97F633C50EF1BA57743F0CFFB81047
-:100E8000F131F2B7062BDB73DACF05FE374FF8FEF0
-:100E900073D0E313191F99CA68DEE55C23D367A1F9
-:100EA000F06E89A771B141B1378BE0F9631A317FD8
-:100EB000F13AC59C003BB062D864D58175C3188FE8
-:100EC000251B2677A17FE183B27FB6C57BF024F690
-:100ED000F98DD9D9EC607B9352326900FFCBB966AA
-:100EE0005EB7688BC2F1BFFE9DB427E21A83CF794B
-:100EF00059E3BFF8CAA2802F3FD0F872DB83EF1C02
-:100F00004DA07DEDB1EE2BB01B6F3F7E26D54FFD82
-:100F10000531E73221E76966F75315387793C589BC
-:100F200073646725AAF1347FCA8F731F43BBE8C17E
-:100F3000C54F55C0DE6EB772DEA6E3B74A711A60C0
-:100F40008F5F6FFCE112D0EDECE3568EDB57358EF0
-:100F50008F1743E8A9DEEE21FE3B28D1D9576FE574
-:100F6000F6857ABB70903CECAF4F60F8B7F50E6E2B
-:100F7000C57C295FABB4FCF87AFB4DFD325C3828A8
-:100F80009ECDDE60130EB2534971AE517974CEB46A
-:100F900089354D1BB573A5D1FAC99EE47CD0217B60
-:100FA000E3CA2E84BCE63C998FBD797243128CF261
-:100FB000F2073FD85941E373F34AC6E551BF75C7FD
-:100FC000675C5778BDE39185A0777993459E4F3B49
-:100FD000F7D9C7D3E39FA2FD3D6F9838DFAFDBF1B0
-:100FE000C1CE8DD42EDDB2D21C2CEFDFF6BCC91AD7
-:100FF0003EDFA457D7A3C33FAE579B93587F9A4871
-:10100000AF32FF79BDAA7B700DD3EF81BC92D9A01E
-:10101000FB59932709FA7476C20C9673CF6185E960
-:10102000AFDB717D7DB176DE2A836FCBF4E4013BCB
-:101030007E4964337D8F747C928EB8F752FB82BFF9
-:101040007BEE43746E3F9DBB9DE8EB1F7FEDF83454
-:10105000B37B9C93CE37CD20E3DD6BE2D63C835649
-:101060002FE83697444A9A2BA8CB68FE93FC982722
-:101070009AF0A9EE54FC6159F067B79E3322DFA3C2
-:10108000BCF1C3E038827E3E0CF2DBD7C3F79BDABB
-:101090005AEC93366077BFF36783F007F9E99B7BDF
-:1010A000C2843FE8BB57F313EA33139F7A3B46B23F
-:1010B0005D00DF8CA8C7754C68027CCE2CF9D87B0C
-:1010C00088E22659C711EAB481739EEBB890053BBC
-:1010D0001B7ADEDA972FB07C54B73FF299C2E79FB4
-:1010E00075CE98F5CDE73FB2FB4216F877CED433F4
-:1010F0000DF956AFB9270B7CA87D45DAF37F940E26
-:101100007A7FC5063A08E979AD62653929542F72AC
-:10111000DDA0F7B8AC1BD476EC627BDADF29EB37C5
-:101120007586EEA278D43B567CD0057BD69F20F303
-:1011300028DADF05BA4D1FA7F941635FD25CB26BB5
-:101140002F5E950799FF9D85FE8EC73EBE6AD8012A
-:1011500091152E10579C873E53FFC2D5C9EB21E74E
-:1011600067BD23A6C03EBE99F5B75AAEF7BD1A6E4D
-:101170005739EEA1DE20FE5D3D875715AE41F58063
-:1011800070E10A9A576776FC80E3E313AA405C5744
-:101190003751EA937859EA53CDBA23E684A0FD7615
-:1011A000429F186F192FCE7EF56FAC975B66BA3AE7
-:1011B000A197E1B085D82F21DAAB28DA3CE27FADE8
-:1011C000864344A796F717AB3C5ED7AE8A915893F7
-:1011D00010E94DA373148BAD46C4D3B3856F3AEABF
-:1011E00036C2D8F3CB5B687CCEABEAD44D82F3A792
-:1011F00045259C57BA5357213E32281A5D7DD97335
-:1012000083FD599EF453D35585FD58DFC8708E5326
-:1012100066CDAF2905BEFABCAC61721EEDC37196F6
-:10122000F0F665CD857EFAFBB2E6450ECCBBEBD57C
-:10123000F015EC17852FFBAEA0EF84E5CBFAE8E7BD
-:10124000E4472027759764BDA350FDEA09C4E7ABC6
-:101250000E93BC203E3424BF6B801D273A83AF170A
-:1012600088AF2EF81FB770B9A03F934678A13F759D
-:10127000FB1561449DA8C3D2843A52ADA9270EF252
-:10128000BCB1FD4F66C8735DDB3B66C724AC977588
-:10129000275248B6E3759AFFAA691FFF2EEA7C35EC
-:1012A000C7A517AD31BEC3F97BD5C156CED3AB852B
-:1012B0009FF3F4EA96C1F2D29FE0E0BA48A87E8498
-:1012C000E53B06E9C5ACED522FEE52C50AD839A16F
-:1012D000D5696725C4733C32B04EC6BB2EF5C2C378
-:1012E000885F02298A53A1AD02619E75888B3CE913
-:1012F000329E09FCEE85EC656C57BCD977D0B902FB
-:101300005ABC3B6BC336A31A84CFAC4E59970C849E
-:1013100089F243CC6FF768F041B84A22F27358AFB4
-:10132000B26057030659470D3D47BD562F3A817AA3
-:1013300052E600DE731213A51D135E969F2E83FCEA
-:10134000BECB40E35306D62FC997EB07F2215907CE
-:10135000BB9E5DD94DFC2923FEEC253EA37D9EFC62
-:101360007119D99916F2C780FF95FC315A5F7D0635
-:10137000F7BF58EF64F860FD4D0C1FAA7731DC5EB3
-:101380005FCCEDCBF525DC7F02A87E17FF7BBA1181
-:10139000F2D0051D1B35009F8A0981470D9E7F2ACB
-:1013A00046190C8F52787E76FED38D1ED48B66DA6A
-:1013B00035FD764422FE3A6B9375A8B33659876A99
-:1013C0001DE5BE259FC6CB66ADDD2DF350573AE631
-:1013D00015C42CE0FCB59FF257D8A395F9EE3CF06C
-:1013E000E5F8F1FCD46D6C276D5C073D75F70DD108
-:1013F0005C077C83F271FA746EC6D475D904E74633
-:10140000282CBF642F6E2CD1F34ADA27BF53DEA3FA
-:1014100014AAD565D87FD548DB54D8DFCF5DEEDB85
-:1014200080874EEFA251CB53110F75991CEFA28EFE
-:10143000EBF9BD49209FD2EB7DFABC0E57EEDD588B
-:10144000372B63DCBA29B03BA464B0732EB36801B8
-:101450005E2E43B8B296ED96C3083B70B726C779A7
-:101460000E1917FBCD0E630CEA3761B9B11E5AD7BE
-:10147000A5F1F9B8C6E7131A9FDF429D8CDAB7A928
-:101480001F6D37F5A39D01FA4A7965BA3D91575210
-:10149000C6F22BFA9200EB75C1D9D02F696F92205A
-:1014A000D75B34F94DD0EC4D576E49955CE7E37D41
-:1014B000AAB47ADB05ED1E443FAFBE6E60BDE07698
-:1014C000DE8DC263859D7F49E69D6234C52304CFCE
-:1014D0007B299EED906ABD23F363D2F37953651E99
-:1014E000200E58E4BC04470EF464AD566FEDF51AB7
-:1014F0003C26D4A763BAD363E07F35FDD2E143FF36
-:10150000ADB2BDAE994230B5AF28F27C35F3BAD357
-:101510008761BD6233707DBB498E9FD4F4AF264591
-:10152000DB4F3B8FB0FA92C08FC0E197929610BC10
-:1015300029C2BF4CDA7D7F3ADB6BE14F9F07BBA826
-:10154000F8DE174E8A2B0BA62E318E043D7C3B0114
-:101550005717E42C31DE8CF1D6F7EDC1E3237C493B
-:101560008A1D70B61C1FD1BA7398330836BDF83E79
-:10157000C6CD869C250504CFB1788FD7436E7E2BD0
-:10158000E5CBB6BFED0CE856D521E3F6BCFD6D17F3
-:101590005F845F6E8B74C2BCEFCB4F667AAFEDD8C1
-:1015A000B305F2D6DB2AEF0336B5FC69E7CF799EA7
-:1015B00005D724B4AF2F5BD077561EFDE362E0352C
-:1015C00027DCF705E0878ECE643CE70C977AFDC8F0
-:1015D000D1BC25D0D3DEB6FD3F81FECD89A68016D5
-:1015E000F8BC60E33A44E5810905D0D3DEC8EE8556
-:1015F000D8BFF6798B13725A79203E0FF58143F9E3
-:10160000B21E5E31716B12FCACE1E57DBB7F8EFBDF
-:10161000D5E76D7C2F541723E3BC4AB571DA4AE64F
-:10162000DFAEDD4F03EF7D36BE9FAD40AD8AE08A71
-:10163000DD695CC77FE5EB8F16820F85EA8EDDE8FA
-:10164000FFE2399B017438697645CF801E9E347164
-:10165000BE59A1C115A7864B7CC27B8A987FB15B1E
-:1016600093E0672B87FFF476E03D47DDBA13F98EF0
-:10167000D863E1BB8973FB886EB4EE5CB3690AB8CA
-:10168000DCBB2FD20879B9A06C5DF814F66F96F325
-:101690002ED8B6323D3DCDE305BE47F304ECD6056A
-:1016A00065DBA0FE73CD7BB2908F9E7F7E0EE7A59B
-:1016B000BAFCEAFA52F99C65905F644B40F6A85276
-:1016C000FB5BD83D2282FC6D85069E3FF464EF53A0
-:1016D0006260FDF91693DF4C34AAB08875D6980184
-:1016E0007DA84CBCB518E7AB3434A6236EA998DAB4
-:1016F000B3107A71CE26AC0934EF4DCD6F551E5C18
-:101700003317F1EFF5F0B9A2D9A34B09D27F5D6A87
-:10171000B77983EF2543DBF7EA85FDADB401F8DE49
-:1017200015168EE1F5FDDE34FBAA91A7D5C648FB60
-:10173000F13ECD6F213BF6B5E6EF16AD1E3CBF3F47
-:101740003F86BF5F6BEE4987FFD3F70FE46B7EC325
-:10175000D8930E7B15BA6E0EC211D8911714B6230A
-:101760009507950F54A253A5D5E355411761D6CFE0
-:1017700069BCA2C87509D334BAD3DA0D05C9FCDD3A
-:10178000CA169BCB46EBAAC27AA210175547F6445D
-:1017900021DEE97D59154D1ABB62E334FEA4682CA5
-:1017A0000BAA3756F84C2E5BD6107C46FC44F396B9
-:1017B000E36FFAFE3305297C9EF2F670FE9EB0F7C9
-:1017C0004C839C96EF18BC0EE7B207E95F6FFBAE47
-:1017D000B8E0BC3C45C33BA07CC07A12F8FAC324F5
-:1017E000F0BDD220D6E1FEF23CADC1BD26C1C22A79
-:1017F00061BEF7ACFC6B4418E4E5FCA56AD6DB5E81
-:10180000A587EDDADB0573D92EF59A7AD8AEBD7EC1
-:10181000F42EB60FBDC37A16C24EBD5DB05C8E8F7E
-:10182000EC59E8A0F1FD3A3C46B0DF7FEF680DDBF4
-:101830008F39AA7C57217699ECB21EB4E1543DE76A
-:1018400017264770FE7DBA40ABF70CF087F32E5D8C
-:101850006F7A8563FF41E8617904D775288E6A79CC
-:1018600011F1DE823827DE6B94639D940373F07D63
-:10187000636CCCE565E0CF1DA3DD450539B8DFEC31
-:10188000E13C82A49AFD4DEDEF2C9C4F064C7DBBB4
-:1018900061A7D247BB6717101ED5E6EEF5D984D2F3
-:1018A00045534F174AE4B355698FC41E2957BD9954
-:1018B000BBE43D8D765F79B7467F41494C23E442D6
-:1018C00091FC7DBDFDC05BB02BBDDDE3D81E87EA7A
-:1018D000CDB9F6C7A2601FFE4C7EDC1394EFFF79F2
-:1018E000F11EBE679D8FF720D42E5937581EFABFC0
-:1018F000BA83F33EB125A81F72D830180E9523C8BD
-:10190000A37F90DDF130DDB76B7A5595D75D0B3A4B
-:101910005C85E711AC06C1AF85C021F345898C1306
-:10192000B6C3FF133DAAC7F84F719EBEDF2460C740
-:10193000D792FF62B82DDC8B7CC5B09FFC53ACF412
-:101940004FF00B5551DD5C9FEA6DB3F07DEF431D09
-:101950009F24E1FC24875C87A9EA78290EF9FB3EE5
-:101960002D5F203F18C7EF63DA3AE29077E8FDD5A4
-:10197000065F3AF0A28888E375BDBF46F5A703FF6E
-:101980002AA53B0BE3FBF2EDDA7C8255C082CF51F6
-:10199000AD487D171D2ADBF350BE3DA9C92BD98563
-:1019A0002C7EDFF1B2AC0FE876A042B327AFA13FA7
-:1019B00053EABD5DBF57A2A515D0F721EC43428184
-:1019C0001E17AFE0FACDE3050E096BEB795F595FA7
-:1019D000E2F1DA572E64A564629D362FD80E8D1B76
-:1019E000B02BD0FF04D6FF874C7174AECA9D8A73AA
-:1019F0002DEC54E99A229A2E961B571671DD4C78DD
-:101A0000386F0BC52B548E2617483A551A8615C6C3
-:101A100006ED779E6C7AC214B6337ED89D1FC53E04
-:101A20005A843AC50F4BE5BB81ABFE2658CF719E59
-:101A30001DD28E436DAE18AE95E3E52B1AD7C70FB6
-:101A40008147289E15EEC6A238C7B5FD3ABEE76DA0
-:101A50003A7E79A611C17498BFA66804B5CBADFFD4
-:101A60002C1DE479CF7758FCF0AB15A52BD7470F89
-:101A70002137D7F8831D41FE2B05FCF5F2FDC6F595
-:101A8000F00F6DAB15FF29D48B04E95533EB17E943
-:101A90004B905FB8B920A4EE50BE782CE26AE15EAC
-:101AA0003C167E86F46AA17388FC920CE42803BF7E
-:101AB00019F1701B8ACF5F0AE4BBA49B0BA49E6F35
-:101AC00099E90AC06ECE500D1C8787EEF765818CB0
-:101AD00027BAE322EFD7DF7380D9335449B74443A1
-:101AE000FFDBD0B7C4B84807EE830AF3C3E5BCC335
-:101AF000363BEA3781C397B9BE1B783862BEBC3724
-:101B000088102369BC2B615253B01FF975A13C6F3B
-:101B100078B68C5BEA324C7FBF3E941979B53EC4EF
-:101B200071436638DF97F4B67FCE7E2BD09963C7BA
-:101B3000BD466F376587A44F755FFF571CFC6B6F01
-:101B4000E75FF81D5AEF579FF0FBB48DDAFBC0D763
-:101B5000DAB5F75DDD8E48F4078A3F2AC2BC4D5ADC
-:101B60003B502790F562BDD5F35FBD1E1094078FE3
-:101B70002E1C3A0F8E714704D7091CF143D55582AC
-:101B8000EB04A969B24E801675825493AC130046DB
-:101B90009D002DEA04E8479D0030EA0480512700AB
-:101BA0008C3A015AD409D0FFC57CF95E2640422CFC
-:101BB000EB97116CDFEF6B56BD88CFEF3B2CEFA19D
-:101BC000EE6B54F89DD645FA3EFCDC35EF750E6A97
-:101BD000EF757CDBF85EAFAE4D75825575A6BE63C2
-:101BE000A8EBD4B52ACE35B02FF5F3F9FB1B3B7328
-:101BF000DE2D457FB3C96970804F97E250AFAAECE4
-:101C00006CE6FA5341FC6133F3B74511A897DE65E2
-:101C100091796E8D4ABD53F83E94E3E01A4B37E755
-:101C20001F557B157B59F07DEE4D9FB11D586B8B79
-:101C30006A029E353E9BBD6C88F71F7C2FEC1057C7
-:101C4000EF9B97C929A226A288EF9B97E19E995AFC
-:101C5000A17E65E4FB634A4C87431EF1AE2A03660E
-:101C6000DD2EF53EE43D556567EBFA4471ED3D34FC
-:101C70002A03E07FE8FDB3BB3032F64C380C859880
-:101C80008CB8A9F8F1B2FD6DF4BDFEAD168E3B56D1
-:101C9000E6BB97438E8E995C5C273976D8C6F9D11E
-:101CA000C7DBC60FAA937CEE725717F2FDFC68AE35
-:101CB0005BAC3229EC97F38BC7C5F3BB81E326F607
-:101CC0003F1DAE925ACC5B35C9C1F5A9428BB89F76
-:101CD000F7D1DE6951CBFA54B856F11A085E2C9C44
-:101CE00066E8CF22221BCB8B296203DE532D12F232
-:101CF0007D832E37ABB6291C1770A1200EF7929268
-:101D0000BE8B3AFFED32DE2F2CB5C8F835D120EF6F
-:101D1000B31337C9F72D3F126E33FCED72F28B68A7
-:101D2000C94FFEAE87FADDE1A393647CEE88C7FE5F
-:101D30008B4F98F8BD6F61FCF7D3DDECAF0BF81D4E
-:101D400083E2BF47BD72C3F5F527F41DC33193B4D9
-:101D50002F4447CE8BBA20975C9F71737BA2BE9CA9
-:101D6000DB1933A59DBEFA2E91786407FEE17DEF65
-:101D7000235F4C8C8F74C2DEE97A7FCDFBC430D9EF
-:101D8000EAEF13C7502B82DE276E713978FF44C308
-:101D9000C9A90ED0E3AF114ED0437FA7B86566C97D
-:101DA0002EF0C915253CF82EEE51B6125D8B701041
-:101DB00005756E9F4B45DDFAB062E777D1D7D8C97C
-:101DC0006D0FE31D4F5DAA62571CA8876F2D8C23F2
-:101DD000BC8B529219EFBA76592F650AC5A19EAEF7
-:101DE000E983CBDD563862A07F8EA617BD345FCA6B
-:101DF000C92D5EC8DBB7A8A33E87F91E6173366B99
-:101E0000F91AF83EE786315C4FD5E5A6BF25BE0935
-:101E100072F346A1F433A5A5EF98100774E5BA8FC5
-:101E2000E2FC0BCB3E7B388ECF37741D8BEC28DF6A
-:101E30004B86D6B174BBBC5BAB83C37E1AB53AABE1
-:101E400051ABB31AB53AAB51ABB31AB53AAB51ABD0
-:101E5000B31AB53AAB51ABB31AB53AAB91EB772B9A
-:101E6000B87DBB7E35B7DDF51E1E0FB2FFEF5DC737
-:101E7000FE87D6413FC2BCD03AA8B03AA2D98F92D1
-:101E80007ECBFA7348DDB378F8920D44BFFC06B3FD
-:101E9000135D7A1D14EF97EF8B607B70B170C8FAF9
-:101EA000A74EB708AE97F60BDB14D03F2F639CD13B
-:101EB00040E37FD5F8A0D71FA11F381FF4032DF4EE
-:101EC000C39836A01FCF984985B3A5BFF7B0BFB759
-:101ED000315FD7AF21FB41F052611F643F2E86D89E
-:101EE0000F4A3CEE061ECB3AE5BB26FDFD661E35CD
-:101EF0005F4E19C29EF8A43D1913E6DB87EF8CA94B
-:101F00000DE3F7C1C7B4F758C736CA777165A28425
-:101F1000BF3B845D89023F960EEF7BFF699ABF74D9
-:101F20007304C72DEB472E9BF6BFB12B9F150AA656
-:101F3000DB6FEAFD951F132E056152FE0ACC2203CA
-:101F4000F735C210C67A50A86E51703FBAEA5E31BA
-:101F5000197C2EB094EC009EF1DAFDB688D5EAAD7E
-:101F6000C6EE8A3D049F8C4B74E25E6B74C2218185
-:101F7000F74F8575C599B08BFE31EE09453978BFAD
-:101F8000BC55C1FAF04C79FE3B8AC39B205781C3F4
-:101F9000E373C0EF7916471BEA00CEA284A5C8F30D
-:101FA000E7453B72500770768D9270BCA34D71224D
-:101FB000944D585AC0EFCFAC5B3FB6E2DD9A22A2F7
-:101FC000E95C9661EE1C7CA7A6F85399378B3EF628
-:101FD000633717C9FC6BC46BC28F7BABBE59917C56
-:101FE0007F26321D3918A7B8F2BB45241F7FFC9EFF
-:101FF000EB16AC4FD4F08CC72DA20AAE76DBD09E88
-:10200000D0EEF3BA0CEE52B445511E23F71BBCD9E7
-:1020100068DF34F87E8C7E92E722EC57F4D8E489AE
-:102020001904275A7C6C273B5CAE5BB1FFAB335D78
-:10203000C5180FAD9F83B7C8F3099FDB302FF41D80
-:1020400096CECFA54552EECB8AA4FD98BE56DEC7EC
-:1020500086F2BDACC8A0D9B7BF8F37E15B8AEFE984
-:10206000F88BAD8BB3810FE17B2FF0247C17625C82
-:1020700044C470BDE3FA72E6E1EF951549F9227B9D
-:1020800056F5B1B467DCA61BBDC3103F8EFA857749
-:1020900018F01DD5D867C3BFC378D6D367837F7FB9
-:1020A000F6C13E1BFA9F75C977D2A1FB3716C9F757
-:1020B00013E9D3FB78FD58FA5637C7E97DC31047BB
-:1020C000A5977FBC5EDEBB64B07F19ABF997B1BF4B
-:1020D0004869EF21791BFB6434DF6F8B82581EAF98
-:1020E000B44A3DADFC45D9A1366AC76F277C83E26F
-:1020F000AF095EC27B505C64EC97EF2D09069DF63C
-:102100009A1886CC22BEAA11F2BDE528CD6E206EAB
-:102110002B25BB50537EF432BF03C07AEC8F3B5B60
-:10212000C85FBB49C2E4AE918F2E9FBFA68BF3C39D
-:10213000ED57FBB57CB3753DF2678ADF06F5579620
-:102140001DE982BFA9DA3BB8BF66C5679CC752FCD0
-:1021500036A8FFDE1F7FC0EF6CEADA07F7137F9F18
-:10216000029F75FE1E33F92620DF3B5613E694FFCF
-:102170007EC0B712FADE541DC1EF6777FD3A8FE5D6
-:1021800046E737AD6FFA76F2B196E77BF24406F494
-:10219000E19BDA5ED8A7B441F6C9C375BED9916C8C
-:1021A00077EAB4FCAAB6CCCE7E3EB1D6CAF6AB5026
-:1021B0000D7302AE354A3B238A55CD4EF958FF4F79
-:1021C000DE3E8CEB797C00C03193F8DD71DC5A097E
-:1021D000F78DB0B07D28349454EFA1F6A86105DBEB
-:1021E0008104BCB824BE3F03FBA0427F655DB5CE31
-:1021F000EC53E4FDBE2307F9AE7EDFD4B0D1DB7A29
-:1022000010F9B2E27D7219EA8A7746F0FD4100F5D5
-:10221000463A4FC33069471B16A4B31F088892D2B1
-:10222000958843E68771FDB16198E351DC27365408
-:102230004CE438FAD07F4BBFDB37D7EA441CD530AB
-:10224000D9B106EF551A7EE1E0F15714B99FE75175
-:10225000499F86B9F2FC0D15319CF7E87C686874DB
-:102260008DC4FDD4CC31EEFF00DF4769F7730DC993
-:10227000D44FED134AC9821F619F4912DF19331DE4
-:10228000AC77C7164C7C74B783DD891FF74475B3F0
-:102290002307E5C5FF033C759D8B10370000000048
-:1022A0000000000000000000050207000000000020
-:00000001FF
diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h
index 79000bf..6b801d1 100644
--- a/fs/9p/v9fs.h
+++ b/fs/9p/v9fs.h
@@ -24,7 +24,7 @@
 /**
  * enum p9_session_flags - option flags for each 9P session
  * @V9FS_PROTO_2000U: whether or not to use 9P2000.u extensions
- * @V9FS_PROTO_2010L: whether or not to use 9P2010.l extensions
+ * @V9FS_PROTO_2000L: whether or not to use 9P2000.l extensions
  * @V9FS_ACCESS_SINGLE: only the mounting user can access the hierarchy
  * @V9FS_ACCESS_USER: a new attach will be issued for every user (default)
  * @V9FS_ACCESS_ANY: use a single attach for all users
@@ -34,7 +34,7 @@
  */
 enum p9_session_flags {
 	V9FS_PROTO_2000U	= 0x01,
-	V9FS_PROTO_2010L	= 0x02,
+	V9FS_PROTO_2000L	= 0x02,
 	V9FS_ACCESS_SINGLE	= 0x04,
 	V9FS_ACCESS_USER	= 0x08,
 	V9FS_ACCESS_ANY		= 0x0C,
@@ -130,5 +130,5 @@
 
 static inline int v9fs_proto_dotl(struct v9fs_session_info *v9ses)
 {
-	return v9ses->flags & V9FS_PROTO_2010L;
+	return v9ses->flags & V9FS_PROTO_2000L;
 }
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index 6580aa4..d8a3afe 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -76,6 +76,15 @@
 	return rettype;
 }
 
+static void p9stat_init(struct p9_wstat *stbuf)
+{
+	stbuf->name  = NULL;
+	stbuf->uid   = NULL;
+	stbuf->gid   = NULL;
+	stbuf->muid  = NULL;
+	stbuf->extension = NULL;
+}
+
 /**
  * v9fs_dir_readdir - read a directory
  * @filp: opened file structure
@@ -131,8 +140,8 @@
 			rdir->head = 0;
 			rdir->tail = err;
 		}
-
 		while (rdir->head < rdir->tail) {
+			p9stat_init(&st);
 			err = p9stat_read(rdir->buf + rdir->head,
 						buflen - rdir->head, &st,
 						fid->clnt->proto_version);
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 3612268..df52d48 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -114,7 +114,7 @@
 	P9_DPRINTK(P9_DEBUG_VFS, "filp: %p lock: %p\n", filp, fl);
 
 	/* No mandatory locks */
-	if (__mandatory_lock(inode))
+	if (__mandatory_lock(inode) && fl->fl_type != F_UNLCK)
 		return -ENOLCK;
 
 	if ((IS_SETLK(cmd) || IS_SETLKW(cmd)) && fl->fl_type != F_UNLCK) {
@@ -215,7 +215,7 @@
 	struct p9_fid *fid;
 	struct p9_client *clnt;
 	struct inode *inode = filp->f_path.dentry->d_inode;
-	int origin = *offset;
+	loff_t origin = *offset;
 	unsigned long pg_start, pg_end;
 
 	P9_DPRINTK(P9_DEBUG_VFS, "data %p count %d offset %x\n", data,
diff --git a/fs/affs/bitmap.c b/fs/affs/bitmap.c
index dc5ef14..8306d53 100644
--- a/fs/affs/bitmap.c
+++ b/fs/affs/bitmap.c
@@ -128,7 +128,7 @@
 /*
  * Allocate a block in the given allocation zone.
  * Since we have to byte-swap the bitmap on little-endian
- * machines, this is rather expensive. Therefor we will
+ * machines, this is rather expensive. Therefore we will
  * preallocate up to 16 blocks from the same word, if
  * possible. We are not doing preallocations in the
  * header zone, though.
diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
index 9f0bf13..2de0095 100644
--- a/fs/anon_inodes.c
+++ b/fs/anon_inodes.c
@@ -209,6 +209,7 @@
 	inode->i_mode = S_IRUSR | S_IWUSR;
 	inode->i_uid = current_fsuid();
 	inode->i_gid = current_fsgid();
+	inode->i_flags |= S_PRIVATE;
 	inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
 	return inode;
 }
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 6d6a16c..2c32d00 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1374,7 +1374,7 @@
 
 /*
  * fill up all the fields in prstatus from the given task struct, except
- * registers which need to be filled up seperately.
+ * registers which need to be filled up separately.
  */
 static void fill_prstatus(struct elf_prstatus *prstatus,
 			  struct task_struct *p, long signr)
diff --git a/fs/bio.c b/fs/bio.c
index d89e019..e7bf6ca 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -264,13 +264,12 @@
  * bio_alloc_bioset - allocate a bio for I/O
  * @gfp_mask:   the GFP_ mask given to the slab allocator
  * @nr_iovecs:	number of iovecs to pre-allocate
- * @bs:		the bio_set to allocate from. If %NULL, just use kmalloc
+ * @bs:		the bio_set to allocate from.
  *
  * Description:
- *   bio_alloc_bioset will first try its own mempool to satisfy the allocation.
+ *   bio_alloc_bioset will try its own mempool to satisfy the allocation.
  *   If %__GFP_WAIT is set then we will block on the internal pool waiting
- *   for a &struct bio to become free. If a %NULL @bs is passed in, we will
- *   fall back to just using @kmalloc to allocate the required memory.
+ *   for a &struct bio to become free.
  *
  *   Note that the caller must set ->bi_destructor on successful return
  *   of a bio, to do the appropriate freeing of the bio once the reference
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 2b59201..0427183 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -901,7 +901,7 @@
 	root->highest_objectid = 0;
 	root->name = NULL;
 	root->in_sysfs = 0;
-	root->inode_tree.rb_node = NULL;
+	root->inode_tree = RB_ROOT;
 
 	INIT_LIST_HEAD(&root->dirty_list);
 	INIT_LIST_HEAD(&root->orphan_list);
@@ -1673,7 +1673,7 @@
 	insert_inode_hash(fs_info->btree_inode);
 
 	spin_lock_init(&fs_info->block_group_cache_lock);
-	fs_info->block_group_cache_tree.rb_node = NULL;
+	fs_info->block_group_cache_tree = RB_ROOT;
 
 	extent_io_tree_init(&fs_info->freed_extents[0],
 			     fs_info->btree_inode->i_mapping, GFP_NOFS);
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index b177ed3..7073cbb 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -104,8 +104,8 @@
 void extent_io_tree_init(struct extent_io_tree *tree,
 			  struct address_space *mapping, gfp_t mask)
 {
-	tree->state.rb_node = NULL;
-	tree->buffer.rb_node = NULL;
+	tree->state = RB_ROOT;
+	tree->buffer = RB_ROOT;
 	tree->ops = NULL;
 	tree->dirty_bytes = 0;
 	spin_lock_init(&tree->lock);
diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c
index 428fcac..28d87ba 100644
--- a/fs/btrfs/extent_map.c
+++ b/fs/btrfs/extent_map.c
@@ -35,7 +35,7 @@
  */
 void extent_map_tree_init(struct extent_map_tree *tree, gfp_t mask)
 {
-	tree->map.rb_node = NULL;
+	tree->map = RB_ROOT;
 	rwlock_init(&tree->lock);
 }
 
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index cb2849f..dd831ed 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -870,7 +870,7 @@
 		tree_insert_offset(&block_group->free_space_offset,
 				   entry->offset, &entry->offset_index, 0);
 	}
-	cluster->root.rb_node = NULL;
+	cluster->root = RB_ROOT;
 
 out:
 	spin_unlock(&cluster->lock);
@@ -1355,7 +1355,7 @@
 {
 	spin_lock_init(&cluster->lock);
 	spin_lock_init(&cluster->refill_lock);
-	cluster->root.rb_node = NULL;
+	cluster->root = RB_ROOT;
 	cluster->max_size = 0;
 	cluster->points_to_bitmap = false;
 	INIT_LIST_HEAD(&cluster->block_group_list);
diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h
index 1fe1282..9116c6d 100644
--- a/fs/btrfs/ordered-data.h
+++ b/fs/btrfs/ordered-data.h
@@ -129,7 +129,7 @@
 btrfs_ordered_inode_tree_init(struct btrfs_ordered_inode_tree *t)
 {
 	mutex_init(&t->mutex);
-	t->tree.rb_node = NULL;
+	t->tree = RB_ROOT;
 	t->last = NULL;
 }
 
diff --git a/fs/btrfs/ref-cache.h b/fs/btrfs/ref-cache.h
index bc283ad..e2a55cb 100644
--- a/fs/btrfs/ref-cache.h
+++ b/fs/btrfs/ref-cache.h
@@ -52,7 +52,7 @@
 
 static inline void btrfs_leaf_ref_tree_init(struct btrfs_leaf_ref_tree *tree)
 {
-	tree->root.rb_node = NULL;
+	tree->root = RB_ROOT;
 	INIT_LIST_HEAD(&tree->list);
 	spin_lock_init(&tree->lock);
 }
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index ab7ab53..0109e56 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -170,14 +170,14 @@
 
 static void mapping_tree_init(struct mapping_tree *tree)
 {
-	tree->rb_root.rb_node = NULL;
+	tree->rb_root = RB_ROOT;
 	spin_lock_init(&tree->lock);
 }
 
 static void backref_cache_init(struct backref_cache *cache)
 {
 	int i;
-	cache->rb_root.rb_node = NULL;
+	cache->rb_root = RB_ROOT;
 	for (i = 0; i < BTRFS_MAX_LEVEL; i++)
 		INIT_LIST_HEAD(&cache->pending[i]);
 	spin_lock_init(&cache->lock);
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 8a1ea6e..f8b4521 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -128,7 +128,7 @@
 {
 	struct btrfs_fs_info *info = root->fs_info;
 	substring_t args[MAX_OPT_ARGS];
-	char *p, *num;
+	char *p, *num, *orig;
 	int intarg;
 	int ret = 0;
 
@@ -143,6 +143,7 @@
 	if (!options)
 		return -ENOMEM;
 
+	orig = options;
 
 	while ((p = strsep(&options, ",")) != NULL) {
 		int token;
@@ -280,7 +281,7 @@
 		}
 	}
 out:
-	kfree(options);
+	kfree(orig);
 	return ret;
 }
 
diff --git a/fs/btrfs/sysfs.c b/fs/btrfs/sysfs.c
index a240b6f..4ce16ef7 100644
--- a/fs/btrfs/sysfs.c
+++ b/fs/btrfs/sysfs.c
@@ -164,12 +164,12 @@
 	complete(&root->kobj_unregister);
 }
 
-static struct sysfs_ops btrfs_super_attr_ops = {
+static const struct sysfs_ops btrfs_super_attr_ops = {
 	.show	= btrfs_super_attr_show,
 	.store	= btrfs_super_attr_store,
 };
 
-static struct sysfs_ops btrfs_root_attr_ops = {
+static const struct sysfs_ops btrfs_root_attr_ops = {
 	.show	= btrfs_root_attr_show,
 	.store	= btrfs_root_attr_store,
 };
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index b2acc79..2a36e23 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -69,7 +69,7 @@
 		cur_trans->commit_done = 0;
 		cur_trans->start_time = get_seconds();
 
-		cur_trans->delayed_refs.root.rb_node = NULL;
+		cur_trans->delayed_refs.root = RB_ROOT;
 		cur_trans->delayed_refs.num_entries = 0;
 		cur_trans->delayed_refs.num_heads_ready = 0;
 		cur_trans->delayed_refs.num_heads = 0;
diff --git a/fs/buffer.c b/fs/buffer.c
index 6fa5302..c9c266d 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2893,7 +2893,7 @@
 
 	/*
 	 * The page straddles i_size.  It must be zeroed out on each and every
-	 * writepage invokation because it may be mmapped.  "A file is mapped
+	 * writepage invocation because it may be mmapped.  "A file is mapped
 	 * in multiples of the page size.  For a file that is not a multiple of
 	 * the  page size, the remaining memory is zeroed when mapped, and
 	 * writes to that region are not written out to the file."
@@ -3265,7 +3265,7 @@
 	
 struct buffer_head *alloc_buffer_head(gfp_t gfp_flags)
 {
-	struct buffer_head *ret = kmem_cache_alloc(bh_cachep, gfp_flags);
+	struct buffer_head *ret = kmem_cache_zalloc(bh_cachep, gfp_flags);
 	if (ret) {
 		INIT_LIST_HEAD(&ret->b_assoc_buffers);
 		get_cpu_var(bh_accounting).nr++;
@@ -3352,15 +3352,6 @@
 }
 EXPORT_SYMBOL(bh_submit_read);
 
-static void
-init_buffer_head(void *data)
-{
-	struct buffer_head *bh = data;
-
-	memset(bh, 0, sizeof(*bh));
-	INIT_LIST_HEAD(&bh->b_assoc_buffers);
-}
-
 void __init buffer_init(void)
 {
 	int nrpages;
@@ -3369,7 +3360,7 @@
 			sizeof(struct buffer_head), 0,
 				(SLAB_RECLAIM_ACCOUNT|SLAB_PANIC|
 				SLAB_MEM_SPREAD),
-				init_buffer_head);
+				NULL);
 
 	/*
 	 * Limit the bh occupancy to 10% of ZONE_NORMAL
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index 20692fb..a20bea5 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -136,7 +136,7 @@
 		return 0;
 	}
 
-	ch = *(ctx->pointer)++; /* ch has 0xa, ptr points to lenght octet */
+	ch = *(ctx->pointer)++; /* ch has 0xa, ptr points to length octet */
 	if ((ch) == ASN1_ENUM)  /* if ch value is ENUM, 0xa */
 		*val = *(++(ctx->pointer)); /* value has enum value */
 	else
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index b44ce0a..b1d61d0 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -54,7 +54,7 @@
  * Extracts sharename form full UNC.
  * i.e. strips from UNC trailing path that is not part of share
  * name and fixup missing '\' in the begining of DFS node refferal
- * if neccessary.
+ * if necessary.
  * Returns pointer to share name on success or ERR_PTR on error.
  * Caller is responsible for freeing returned string.
  */
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 9d17df3..6118358 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3886,7 +3886,7 @@
 		goto parse_DFS_referrals_exit;
 	}
 
-	/* collect neccessary data from referrals */
+	/* collect necessary data from referrals */
 	for (i = 0; i < *num_of_nodes; i++) {
 		char *temp;
 		int max_len;
diff --git a/fs/compat.c b/fs/compat.c
index 00d90c2..030602d 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1795,6 +1795,24 @@
 	return ret;
 }
 
+struct compat_sel_arg_struct {
+	compat_ulong_t n;
+	compat_uptr_t inp;
+	compat_uptr_t outp;
+	compat_uptr_t exp;
+	compat_uptr_t tvp;
+};
+
+asmlinkage long compat_sys_old_select(struct compat_sel_arg_struct __user *arg)
+{
+	struct compat_sel_arg_struct a;
+
+	if (copy_from_user(&a, arg, sizeof(a)))
+		return -EFAULT;
+	return compat_sys_select(a.n, compat_ptr(a.inp), compat_ptr(a.outp),
+				 compat_ptr(a.exp), compat_ptr(a.tvp));
+}
+
 #ifdef HAVE_SET_RESTORE_SIGMASK
 static long do_compat_pselect(int n, compat_ulong_t __user *inp,
 	compat_ulong_t __user *outp, compat_ulong_t __user *exp,
diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c
index 26a8bd4..f994a7d 100644
--- a/fs/dlm/lockspace.c
+++ b/fs/dlm/lockspace.c
@@ -148,7 +148,7 @@
 	kfree(ls);
 }
 
-static struct sysfs_ops dlm_attr_ops = {
+static const struct sysfs_ops dlm_attr_ops = {
 	.show  = dlm_attr_show,
 	.store = dlm_attr_store,
 };
diff --git a/fs/dlm/member.c b/fs/dlm/member.c
index 84f70bf..b12532e 100644
--- a/fs/dlm/member.c
+++ b/fs/dlm/member.c
@@ -312,7 +312,7 @@
 	/*
 	 * This in_recovery lock does two things:
 	 * 1) Keeps this function from returning until all threads are out
-	 *    of locking routines and locking is truely stopped.
+	 *    of locking routines and locking is truly stopped.
 	 * 2) Keeps any new requests from being processed until it's unlocked
 	 *    when recovery is complete.
 	 */
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index e844acc..1bee604 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -164,7 +164,7 @@
  * write out the superblock safely.
  *
  * We'll just use the journal_abort() error code to record an error in
- * the journal instead.  On recovery, the journal will compain about
+ * the journal instead.  On recovery, the journal will complain about
  * that error until we've noted it down and cleared it.
  */
 
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 506713a..54df209d 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -69,7 +69,7 @@
  *
  * pa_lstart -> the logical start block for this prealloc space
  * pa_pstart -> the physical start block for this prealloc space
- * pa_len    -> lenght for this prealloc space
+ * pa_len    -> length for this prealloc space
  * pa_free   ->  free space available in this prealloc space
  *
  * The inode preallocation space is used looking at the _logical_ start
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 2b83b96..ba191da 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -302,7 +302,7 @@
  * write out the superblock safely.
  *
  * We'll just use the jbd2_journal_abort() error code to record an error in
- * the journal instead.  On recovery, the journal will compain about
+ * the journal instead.  On recovery, the journal will complain about
  * that error until we've noted it down and cleared it.
  */
 
@@ -2358,7 +2358,7 @@
 }
 
 
-static struct sysfs_ops ext4_attr_ops = {
+static const struct sysfs_ops ext4_attr_ops = {
 	.show	= ext4_attr_show,
 	.store	= ext4_attr_store,
 };
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index fbeecdc..0ce143b 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -558,7 +558,7 @@
 	buf->f_bavail = sbi->free_clusters;
 	buf->f_fsid.val[0] = (u32)id;
 	buf->f_fsid.val[1] = (u32)(id >> 32);
-	buf->f_namelen = sbi->options.isvfat ? 260 : 12;
+	buf->f_namelen = sbi->options.isvfat ? FAT_LFN_LEN : 12;
 
 	return 0;
 }
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index f565f24..c1ef501 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -502,14 +502,14 @@
 		*outlen = utf8s_to_utf16s(name, len, (wchar_t *)outname);
 		if (*outlen < 0)
 			return *outlen;
-		else if (*outlen > 255)
+		else if (*outlen > FAT_LFN_LEN)
 			return -ENAMETOOLONG;
 
 		op = &outname[*outlen * sizeof(wchar_t)];
 	} else {
 		if (nls) {
 			for (i = 0, ip = name, op = outname, *outlen = 0;
-			     i < len && *outlen <= 255;
+			     i < len && *outlen <= FAT_LFN_LEN;
 			     *outlen += 1)
 			{
 				if (escape && (*ip == ':')) {
@@ -549,7 +549,7 @@
 				return -ENAMETOOLONG;
 		} else {
 			for (i = 0, ip = name, op = outname, *outlen = 0;
-			     i < len && *outlen <= 255;
+			     i < len && *outlen <= FAT_LFN_LEN;
 			     i++, *outlen += 1)
 			{
 				*op++ = *ip++;
@@ -701,6 +701,15 @@
 	return fat_search_long(dir, qname->name, len, sinfo);
 }
 
+/*
+ * (nfsd's) anonymous disconnected dentry?
+ * NOTE: !IS_ROOT() is not anonymous (I.e. d_splice_alias() did the job).
+ */
+static int vfat_d_anon_disconn(struct dentry *dentry)
+{
+	return IS_ROOT(dentry) && (dentry->d_flags & DCACHE_DISCONNECTED);
+}
+
 static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry,
 				  struct nameidata *nd)
 {
@@ -729,11 +738,11 @@
 	}
 
 	alias = d_find_alias(inode);
-	if (alias && !(alias->d_flags & DCACHE_DISCONNECTED)) {
+	if (alias && !vfat_d_anon_disconn(alias)) {
 		/*
-		 * This inode has non DCACHE_DISCONNECTED dentry. This
-		 * means, the user did ->lookup() by an another name
-		 * (longname vs 8.3 alias of it) in past.
+		 * This inode has non anonymous-DCACHE_DISCONNECTED
+		 * dentry. This means, the user did ->lookup() by an
+		 * another name (longname vs 8.3 alias of it) in past.
 		 *
 		 * Switch to new one for reason of locality if possible.
 		 */
@@ -743,7 +752,9 @@
 		iput(inode);
 		unlock_super(sb);
 		return alias;
-	}
+	} else
+		dput(alias);
+
 out:
 	unlock_super(sb);
 	dentry->d_op = sb->s_root->d_op;
diff --git a/fs/fscache/Kconfig b/fs/fscache/Kconfig
index 864dac2..cc94bb9 100644
--- a/fs/fscache/Kconfig
+++ b/fs/fscache/Kconfig
@@ -1,7 +1,6 @@
 
 config FSCACHE
 	tristate "General filesystem local caching manager"
-	depends on EXPERIMENTAL
 	select SLOW_WORK
 	help
 	  This option enables a generic filesystem caching manager that can be
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 1a822ce..ec14d19 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -850,7 +850,7 @@
 	req->in.args[0].size = sizeof(*arg);
 	req->in.args[0].value = arg;
 	req->out.numargs = 1;
-	/* Variable length arguement used for backward compatibility
+	/* Variable length argument used for backward compatibility
 	   with interface version < 7.5.  Rest of init_out is zeroed
 	   by do_get_request(), so a short reply is not a problem */
 	req->out.argvar = 1;
diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig
index 4dcddf8..a47b431 100644
--- a/fs/gfs2/Kconfig
+++ b/fs/gfs2/Kconfig
@@ -8,7 +8,6 @@
 	select FS_POSIX_ACL
 	select CRC32
 	select SLOW_WORK
-	select QUOTA
 	select QUOTACTL
 	help
 	  A cluster filesystem.
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index a6abbae8..e6dd2ae 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -640,7 +640,7 @@
 
 	if (!(fl->fl_flags & FL_POSIX))
 		return -ENOLCK;
-	if (__mandatory_lock(&ip->i_inode))
+	if (__mandatory_lock(&ip->i_inode) && fl->fl_type != F_UNLCK)
 		return -ENOLCK;
 
 	if (cmd == F_CANCELLK) {
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index b8025e5..3aac46f 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -616,7 +616,7 @@
 	unsigned int sd_log_blks_reserved;
 	unsigned int sd_log_commited_buf;
 	unsigned int sd_log_commited_databuf;
-	unsigned int sd_log_commited_revoke;
+	int sd_log_commited_revoke;
 
 	unsigned int sd_log_num_buf;
 	unsigned int sd_log_num_revoke;
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index 4511b08..e5bf4b5 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -417,7 +417,7 @@
 	databufhdrs_needed = (sdp->sd_log_commited_databuf +
 			      (dbuf_limit - 1)) / dbuf_limit;
 
-	if (sdp->sd_log_commited_revoke)
+	if (sdp->sd_log_commited_revoke > 0)
 		revokes = gfs2_struct2blk(sdp, sdp->sd_log_commited_revoke,
 					  sizeof(u64));
 
@@ -790,7 +790,6 @@
 	gfs2_assert_withdraw(sdp, (((int)sdp->sd_log_commited_buf) >= 0) ||
 			     (((int)sdp->sd_log_commited_databuf) >= 0));
 	sdp->sd_log_commited_revoke += tr->tr_num_revoke - tr->tr_num_revoke_rm;
-	gfs2_assert_withdraw(sdp, ((int)sdp->sd_log_commited_revoke) >= 0);
 	reserved = calc_reserved(sdp);
 	gfs2_assert_withdraw(sdp, sdp->sd_log_blks_reserved + tr->tr_reserved >= reserved);
 	unused = sdp->sd_log_blks_reserved - reserved + tr->tr_reserved;
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index a054b52..c1309ed 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -1001,7 +1001,7 @@
 /**
  * gfs2_lm_mount - mount a locking protocol
  * @sdp: the filesystem
- * @args: mount arguements
+ * @args: mount arguments
  * @silent: if 1, don't complain if the FS isn't a GFS2 fs
  *
  * Returns: errno
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index b5f1a46..419042f 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -49,7 +49,7 @@
 	return a->store ? a->store(sdp, buf, len) : len;
 }
 
-static struct sysfs_ops gfs2_attr_ops = {
+static const struct sysfs_ops gfs2_attr_ops = {
 	.show  = gfs2_attr_show,
 	.store = gfs2_attr_store,
 };
@@ -574,7 +574,7 @@
 	return 0;
 }
 
-static struct kset_uevent_ops gfs2_uevent_ops = {
+static const struct kset_uevent_ops gfs2_uevent_ops = {
 	.uevent = gfs2_uevent,
 };
 
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 99e9fea..5ae71e7 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1398,7 +1398,7 @@
 	 * the case where our storage is so fast that it is more optimal to go
 	 * ahead and force a flush and wait for the transaction to be committed
 	 * than it is to wait for an arbitrary amount of time for new writers to
-	 * join the transaction.  We acheive this by measuring how long it takes
+	 * join the transaction.  We achieve this by measuring how long it takes
 	 * to commit a transaction, and compare it with how long this
 	 * transaction has been running, and if run time < commit time then we
 	 * sleep for the delta and commit.  This greatly helps super fast disks
diff --git a/fs/locks.c b/fs/locks.c
index ae9ded0..ab24d49 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1455,7 +1455,7 @@
  *	leases held by processes on this node.
  *
  *	There is also no break_lease method; filesystems that
- *	handle their own leases shoud break leases themselves from the
+ *	handle their own leases should break leases themselves from the
  *	filesystem's open, create, and (on truncate) setattr methods.
  *
  *	Warning: the only current setlease methods exist only to disable
diff --git a/fs/mpage.c b/fs/mpage.c
index 42381bd..598d54e 100644
--- a/fs/mpage.c
+++ b/fs/mpage.c
@@ -561,7 +561,7 @@
 	if (page->index >= end_index) {
 		/*
 		 * The page straddles i_size.  It must be zeroed out on each
-		 * and every writepage invokation because it may be mmapped.
+		 * and every writepage invocation because it may be mmapped.
 		 * "A file is mapped in multiples of the page size.  For a file
 		 * that is not a multiple of the page size, the remaining memory
 		 * is zeroed when mapped, and writes to that region are not
diff --git a/fs/namei.c b/fs/namei.c
index 48e60a1..1c0fca6 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2544,7 +2544,7 @@
  *	e) conversion from fhandle to dentry may come in the wrong moment - when
  *	   we are removing the target. Solution: we will have to grab ->i_mutex
  *	   in the fhandle_to_dentry code. [FIXME - current nfsfh.c relies on
- *	   ->i_mutex on parents, which works but leads to some truely excessive
+ *	   ->i_mutex on parents, which works but leads to some truly excessive
  *	   locking].
  */
 static int vfs_rename_dir(struct inode *old_dir, struct dentry *old_dentry,
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 78c7e24..c47b4d7 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -1528,7 +1528,7 @@
 	} } while (0);
 
 /* Encode as an array of strings the string given with components
- * seperated @sep.
+ * separated @sep.
  */
 static __be32 nfsd4_encode_components(char sep, char *components,
 				   __be32 **pp, int *buflen)
diff --git a/fs/nilfs2/alloc.h b/fs/nilfs2/alloc.h
index f4543ac..5cccf87 100644
--- a/fs/nilfs2/alloc.h
+++ b/fs/nilfs2/alloc.h
@@ -42,7 +42,7 @@
 				   const struct buffer_head *, void *);
 
 /**
- * nilfs_palloc_req - persistent alloctor request and reply
+ * nilfs_palloc_req - persistent allocator request and reply
  * @pr_entry_nr: entry number (vblocknr or inode number)
  * @pr_desc_bh: buffer head of the buffer containing block group descriptors
  * @pr_bitmap_bh: buffer head of the buffer containing a block group bitmap
diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c
index 9d1e5de..0131467 100644
--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -288,7 +288,7 @@
  * @vblocknrs and @nitems.
  *
  * Return Value: On success, 0 is returned. On error, one of the following
- * nagative error codes is returned.
+ * negative error codes is returned.
  *
  * %-EIO - I/O error.
  *
diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c
index 0092840..85c89df 100644
--- a/fs/nilfs2/dir.c
+++ b/fs/nilfs2/dir.c
@@ -396,7 +396,7 @@
 		/* next page is past the blocks we've got */
 		if (unlikely(n > (dir->i_blocks >> (PAGE_CACHE_SHIFT - 9)))) {
 			nilfs_error(dir->i_sb, __func__,
-			       "dir %lu size %lld exceeds block cout %llu",
+			       "dir %lu size %lld exceeds block count %llu",
 			       dir->i_ino, dir->i_size,
 			       (unsigned long long)dir->i_blocks);
 			goto out;
diff --git a/fs/nilfs2/gcinode.c b/fs/nilfs2/gcinode.c
index e16a666..8880a9e 100644
--- a/fs/nilfs2/gcinode.c
+++ b/fs/nilfs2/gcinode.c
@@ -28,10 +28,10 @@
  * gcinodes), and this file provides lookup function of the dummy
  * inodes and their buffer read function.
  *
- * Since NILFS2 keeps up multiple checkpoints/snapshots accross GC, it
+ * Since NILFS2 keeps up multiple checkpoints/snapshots across GC, it
  * has to treat blocks that belong to a same file but have different
  * checkpoint numbers.  To avoid interference among generations, dummy
- * inodes are managed separatly from actual inodes, and their lookup
+ * inodes are managed separately from actual inodes, and their lookup
  * function (nilfs_gc_iget) is designed to be specified with a
  * checkpoint number argument as well as an inode number.
  *
diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c
index a2692bb..fc246db 100644
--- a/fs/nilfs2/page.c
+++ b/fs/nilfs2/page.c
@@ -292,7 +292,7 @@
  * @src: source page
  * @copy_dirty: flag whether to copy dirty states on the page's buffer heads.
  *
- * This fuction is for both data pages and btnode pages.  The dirty flag
+ * This function is for both data pages and btnode pages.  The dirty flag
  * should be treated by caller.  The page must not be under i/o.
  * Both src and dst page must be locked
  */
@@ -388,7 +388,7 @@
 }
 
 /**
- * nilfs_copy_back_pages -- copy back pages to orignal cache from shadow cache
+ * nilfs_copy_back_pages -- copy back pages to original cache from shadow cache
  * @dmap: destination page cache
  * @smap: source page cache
  *
diff --git a/fs/nilfs2/segbuf.c b/fs/nilfs2/segbuf.c
index ab56fe4..636eaaf 100644
--- a/fs/nilfs2/segbuf.c
+++ b/fs/nilfs2/segbuf.c
@@ -32,7 +32,7 @@
 struct nilfs_write_info {
 	struct the_nilfs       *nilfs;
 	struct bio	       *bio;
-	int 			start, end; /* The region to be submitted */
+	int			start, end; /* The region to be submitted */
 	int			rest_blocks;
 	int			max_pages;
 	int			nr_vecs;
@@ -174,7 +174,7 @@
 }
 
 /*
- * Setup segument summary
+ * Setup segment summary
  */
 void nilfs_segbuf_fill_in_segsum(struct nilfs_segment_buffer *segbuf)
 {
@@ -470,8 +470,8 @@
  *
  * %-ENOMEM - Insufficient memory available.
  */
-int nilfs_segbuf_write(struct nilfs_segment_buffer *segbuf,
-		       struct the_nilfs *nilfs)
+static int nilfs_segbuf_write(struct nilfs_segment_buffer *segbuf,
+			      struct the_nilfs *nilfs)
 {
 	struct nilfs_write_info wi;
 	struct buffer_head *bh;
@@ -514,7 +514,7 @@
  *
  * %-EIO - I/O error
  */
-int nilfs_segbuf_wait(struct nilfs_segment_buffer *segbuf)
+static int nilfs_segbuf_wait(struct nilfs_segment_buffer *segbuf)
 {
 	int err = 0;
 
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index ada2f1b..69576a9 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -141,7 +141,7 @@
 }
 
 /**
- * nilfs_detroy_transaction_cache - destroy the cache for transaction info
+ * nilfs_destroy_transaction_cache - destroy the cache for transaction info
  *
  * nilfs_destroy_transaction_cache() frees the slab cache for the struct
  * nilfs_transaction_info.
@@ -201,7 +201,7 @@
  * This function allocates a nilfs_transaction_info struct to keep context
  * information on it.  It is initialized and hooked onto the current task in
  * the outermost call.  If a pre-allocated struct is given to @ti, it is used
- * instead; othewise a new struct is assigned from a slab.
+ * instead; otherwise a new struct is assigned from a slab.
  *
  * When @vacancy_check flag is set, this function will check the amount of
  * free space, and will wait for the GC to reclaim disk space if low capacity.
@@ -2214,7 +2214,7 @@
 }
 
 /**
- * nilfs_secgtor_start_timer - set timer of background write
+ * nilfs_segctor_start_timer - set timer of background write
  * @sci: nilfs_sc_info
  *
  * If the timer has already been set, it ignores the new request.
@@ -2854,7 +2854,7 @@
  * @sbi: nilfs_sb_info
  *
  * nilfs_attach_segment_constructor() allocates a struct nilfs_sc_info,
- * initilizes it, and starts the segment constructor.
+ * initializes it, and starts the segment constructor.
  *
  * Return Value: On success, 0 is returned. On error, one of the following
  * negative error code is returned.
diff --git a/fs/nilfs2/segment.h b/fs/nilfs2/segment.h
index 3155e0c..82dfd6a 100644
--- a/fs/nilfs2/segment.h
+++ b/fs/nilfs2/segment.h
@@ -30,7 +30,7 @@
 #include "sb.h"
 
 /**
- * struct nilfs_recovery_info - Recovery infomation
+ * struct nilfs_recovery_info - Recovery information
  * @ri_need_recovery: Recovery status
  * @ri_super_root: Block number of the last super root
  * @ri_ri_cno: Number of the last checkpoint
@@ -71,7 +71,7 @@
  */
 struct nilfs_cstage {
 	int			scnt;
-	unsigned 		flags;
+	unsigned		flags;
 	struct nilfs_inode_info *dirty_file_ptr;
 	struct nilfs_inode_info *gc_inode_ptr;
 };
diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c
index b6c36d0..3c6cc60 100644
--- a/fs/nilfs2/sufile.c
+++ b/fs/nilfs2/sufile.c
@@ -18,7 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  *
  * Written by Koji Sato <koji@osrg.net>.
- * Rivised by Ryusuke Konishi <ryusuke@osrg.net>.
+ * Revised by Ryusuke Konishi <ryusuke@osrg.net>.
  */
 
 #include <linux/kernel.h>
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 92579cc..0cdbc5e 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -436,7 +436,7 @@
 	/*
 	 * Compute the overhead
 	 *
-	 * When distributing meta data blocks outside semgent structure,
+	 * When distributing meta data blocks outside segment structure,
 	 * We must count them as the overhead.
 	 */
 	overhead = 0;
@@ -866,7 +866,7 @@
 	if ((*flags & MS_RDONLY) &&
 	    sbi->s_snapshot_cno != old_opts.snapshot_cno) {
 		printk(KERN_WARNING "NILFS (device %s): couldn't "
-		       "remount to a different snapshot. \n",
+		       "remount to a different snapshot.\n",
 		       sb->s_id);
 		err = -EINVAL;
 		goto restore_opts;
diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index 92733d5..33871f7e 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -386,7 +386,7 @@
 
 	nilfs->ns_blocks_per_segment = le32_to_cpu(sbp->s_blocks_per_segment);
 	if (nilfs->ns_blocks_per_segment < NILFS_SEG_MIN_BLOCKS) {
-		printk(KERN_ERR "NILFS: too short segment. \n");
+		printk(KERN_ERR "NILFS: too short segment.\n");
 		return -EINVAL;
 	}
 
diff --git a/fs/ntfs/ChangeLog b/fs/ntfs/ChangeLog
deleted file mode 100644
index 37c11e1..0000000
--- a/fs/ntfs/ChangeLog
+++ /dev/null
@@ -1,1702 +0,0 @@
-ToDo/Notes:
-	- Find and fix bugs.
-	- The only places in the kernel where a file is resized are
-	  ntfs_file_write*() and ntfs_truncate() for both of which i_mutex is
-	  held.  Just have to be careful in read-/writepage and other helpers
-	  not running under i_mutex that we play nice.  Also need to be careful
-	  with initialized_size extension in ntfs_file_write*() and writepage.
-	  UPDATE: The only things that need to be checked are the compressed
-	  write and the other attribute resize/write cases like index
-	  attributes, etc.  For now none of these are implemented so are safe.
-	- Implement filling in of holes in aops.c::ntfs_writepage() and its
-	  helpers.
-	- Implement mft.c::sync_mft_mirror_umount().  We currently will just
-	  leave the volume dirty on umount if the final iput(vol->mft_ino)
-	  causes a write of any mirrored mft records due to the mft mirror
-	  inode having been discarded already.  Whether this can actually ever
-	  happen is unclear however so it is worth waiting until someone hits
-	  the problem.
-
-2.1.29 - Fix a deadlock at mount time.
-
-	- During mount the VFS holds s_umount lock on the superblock.  So when
-	  we try to empty the journal $LogFile contents by calling
-	  ntfs_attr_set() when the machine does not have much memory and the
-	  journal is large ntfs_attr_set() results in the VM trying to balance
-	  dirty pages which in turn tries to that the s_umount lock and thus we
-	  get a deadlock.  The solution is to not use ntfs_attr_set() and
-	  instead do the zeroing by hand at the block level rather than page
-	  cache level.
-	- Fix sparse warnings.
-
-2.1.28 - Fix a deadlock.
-
-	- Fix deadlock in fs/ntfs/inode.c::ntfs_put_inode().  Thanks to Sergey
-	  Vlasov for the report and detailed analysis of the deadlock.  The fix
-	  involved getting rid of ntfs_put_inode() altogether and hence NTFS no
-	  longer has a ->put_inode super operation.
-
-2.1.27 - Various bug fixes and cleanups.
-
-	- Fix two compiler warnings on Alpha.  Thanks to Andrew Morton for
-	  reporting them.
-	- Fix an (innocent) off-by-one error in the runlist code.
-	- Fix a buggette in an "should be impossible" case handling where we
-	  continued the attribute lookup loop instead of aborting it.
-	- Use buffer_migrate_page() for the ->migratepage function of all ntfs
-	  address space operations.
-	- Fix comparison of $MFT and $MFTMirr to not bail out when there are
-	  unused, invalid mft records which are the same in both $MFT and
-	  $MFTMirr.
-	- Add support for sparse files which have a compression unit of 0.
-	- Remove all the make_bad_inode() calls.  This should only be called
-	  from read inode and new inode code paths.
-	- Limit name length in fs/ntfs/unistr.c::ntfs_nlstoucs() to maximum
-	  allowed by NTFS, i.e. 255 Unicode characters, not including the
-	  terminating NULL (which is not stored on disk).
-	- Improve comments on file attribute flags in fs/ntfs/layout.h.
-	- Fix a bug in fs/ntfs/inode.c::ntfs_read_locked_index_inode() where we
-	  forgot to update a temporary variable so loading index inodes which
-	  have an index allocation attribute failed.
-	- Add a missing call to flush_dcache_mft_record_page() in
-	  fs/ntfs/inode.c::ntfs_write_inode().
-	- Handle the recently introduced -ENAMETOOLONG return value from
-	  fs/ntfs/unistr.c::ntfs_nlstoucs() in fs/ntfs/namei.c::ntfs_lookup().
-	- Semaphore to mutex conversion.  (Ingo Molnar)
-
-2.1.26 - Minor bug fixes and updates.
-
-	- Fix a potential overflow in file.c where a cast to s64 was missing in
-	  a left shift of a page index.
-	- The struct inode has had its i_sem semaphore changed to a mutex named
-	  i_mutex.
-	- We have struct kmem_cache now so use it instead of the typedef
-	  kmem_cache_t.  (Pekka Enberg)
-	- Implement support for sector sizes above 512 bytes (up to the maximum
-	  supported by NTFS which is 4096 bytes).
-	- Do more detailed reporting of why we cannot mount read-write by
-	  special casing the VOLUME_MODIFIED_BY_CHKDSK flag.
-	- Miscellaneous updates to layout.h.
-	- Cope with attribute list attribute having invalid flags.  Windows
-	  copes with this and even chkdsk does not detect or fix this so we
-	  have to cope with it, too.  Thanks to Pawel Kot for reporting the
-	  problem.
-
-2.1.25 - (Almost) fully implement write(2) and truncate(2).
-
-	- Change ntfs_map_runlist_nolock(), ntfs_attr_find_vcn_nolock() and
-	  {__,}ntfs_cluster_free() to also take an optional attribute search
-	  context as argument.  This allows calling these functions with the
-	  mft record mapped.  Update all callers.
-	- Fix potential deadlock in ntfs_mft_data_extend_allocation_nolock()
-	  error handling by passing in the active search context when calling
-	  ntfs_cluster_free().
-	- Change ntfs_cluster_alloc() to take an extra boolean parameter
-	  specifying whether the cluster are being allocated to extend an
-	  attribute or to fill a hole.
-	- Change ntfs_attr_make_non_resident() to call ntfs_cluster_alloc()
-	  with @is_extension set to TRUE and remove the runlist terminator
-	  fixup code as this is now done by ntfs_cluster_alloc().
-	- Change ntfs_attr_make_non_resident to take the attribute value size
-	  as an extra parameter.  This is needed since we need to know the size
-	  before we can map the mft record and our callers always know it.  The
-	  reason we cannot simply read the size from the vfs inode i_size is
-	  that this is not necessarily uptodate.  This happens when
-	  ntfs_attr_make_non_resident() is called in the ->truncate call path.
-	- Fix ntfs_attr_make_non_resident() to update the vfs inode i_blocks
-	  which is zero for a resident attribute but should no longer be zero
-	  once the attribute is non-resident as it then has real clusters
-	  allocated.
-	- Add fs/ntfs/attrib.[hc]::ntfs_attr_extend_allocation(), a function to
-	  extend the allocation of an attributes.  Optionally, the data size,
-	  but not the initialized size can be extended, too.
-	- Implement fs/ntfs/inode.[hc]::ntfs_truncate().  It only supports
-	  uncompressed and unencrypted files and it never creates sparse files
-	  at least for the moment (making a file sparse requires us to modify
-	  its directory entries and we do not support directory operations at
-	  the moment).  Also, support for highly fragmented files, i.e. ones
-	  whose data attribute is split across multiple extents, is severly
-	  limited.  When such a case is encountered, EOPNOTSUPP is returned.
-	- Enable ATTR_SIZE attribute changes in ntfs_setattr().  This completes
-	  the initial implementation of file truncation.  Now both open(2)ing
-	  a file with the O_TRUNC flag and the {,f}truncate(2) system calls
-	  will resize a file appropriately.  The limitations are that only
-	  uncompressed and unencrypted files are supported.  Also, there is
-	  only very limited support for highly fragmented files (the ones whose
-	  $DATA attribute is split into multiple attribute extents).
-	- In attrib.c::ntfs_attr_set() call balance_dirty_pages_ratelimited()
-	  and cond_resched() in the main loop as we could be dirtying a lot of
-	  pages and this ensures we play nice with the VM and the system as a
-	  whole.
-	- Implement file operations ->write, ->aio_write, ->writev for regular
-	  files.  This replaces the old use of generic_file_write(), et al and
-	  the address space operations ->prepare_write and ->commit_write.
-	  This means that both sparse and non-sparse (unencrypted and
-	  uncompressed) files can now be extended using the normal write(2)
-	  code path.  There are two limitations at present and these are that
-	  we never create sparse files and that we only have limited support
-	  for highly fragmented files, i.e. ones whose data attribute is split
-	  across multiple extents.   When such a case is encountered,
-	  EOPNOTSUPP is returned.
-	- $EA attributes can be both resident and non-resident.
-	- Use %z for size_t to fix compilation warnings.  (Andrew Morton)
-	- Fix compilation warnings with gcc-4.0.2 on SUSE 10.0.
-	- Document extended attribute ($EA) NEED_EA flag.  (Based on libntfs
-	  patch by Yura Pakhuchiy.)
-
-2.1.24 - Lots of bug fixes and support more clean journal states.
-
-	- Support journals ($LogFile) which have been modified by chkdsk.  This
-	  means users can boot into Windows after we marked the volume dirty.
-	  The Windows boot will run chkdsk and then reboot.  The user can then
-	  immediately boot into Linux rather than having to do a full Windows
-	  boot first before rebooting into Linux and we will recognize such a
-	  journal and empty it as it is clean by definition.  Note, this only
-	  works if chkdsk left the journal in an obviously clean state.
-	- Support journals ($LogFile) with only one restart page as well as
-	  journals with two different restart pages.  We sanity check both and
-	  either use the only sane one or the more recent one of the two in the
-	  case that both are valid.
-	- Add fs/ntfs/malloc.h::ntfs_malloc_nofs_nofail() which is analogous to
-	  ntfs_malloc_nofs() but it performs allocations with __GFP_NOFAIL and
-	  hence cannot fail.
-	- Use ntfs_malloc_nofs_nofail() in the two critical regions in
-	  fs/ntfs/runlist.c::ntfs_runlists_merge().  This means we no longer
-	  need to panic() if the allocation fails as it now cannot fail.
-	- Fix two nasty runlist merging bugs that had gone unnoticed so far.
-	  Thanks to Stefano Picerno for the bug report.
-	- Remove two bogus BUG_ON()s from fs/ntfs/mft.c.
-	- Fix handling of valid but empty mapping pairs array in
-	  fs/ntfs/runlist.c::ntfs_mapping_pairs_decompress().
-	- Report unrepresentable inodes during ntfs_readdir() as KERN_WARNING
-	  messages and include the inode number.  Thanks to Yura Pakhuchiy for
-	  pointing this out.
-	- Change ntfs_rl_truncate_nolock() to throw away the runlist if the new
-	  length is zero.
-	- Add runlist.[hc]::ntfs_rl_punch_nolock() which punches a caller
-	  specified hole into a runlist.
-	- Fix a bug in fs/ntfs/index.c::ntfs_index_lookup().  When the returned
-	  index entry is in the index root, we forgot to set the @ir pointer in
-	  the index context.  Thanks to Yura Pakhuchiy for finding this bug.
-	- Remove bogus setting of PageError in ntfs_read_compressed_block().
-	- Add fs/ntfs/attrib.[hc]::ntfs_resident_attr_value_resize().
-	- Fix a bug in ntfs_map_runlist_nolock() where we forgot to protect
-	  access to the allocated size in the ntfs inode with the size lock.
-	- Fix ntfs_attr_vcn_to_lcn_nolock() and ntfs_attr_find_vcn_nolock() to
-	  return LCN_ENOENT when there is no runlist and the allocated size is
-	  zero.
-	- Fix load_attribute_list() to handle the case of a NULL runlist.
-	- Fix handling of sparse attributes in ntfs_attr_make_non_resident().
-	- Add BUG() checks to ntfs_attr_make_non_resident() and ntfs_attr_set()
-	  to ensure that these functions are never called for compressed or
-	  encrypted attributes.
-	- Fix cluster (de)allocators to work when the runlist is NULL and more
-	  importantly to take a locked runlist rather than them locking it
-	  which leads to lock reversal.
-	- Truncate {a,c,m}time to the ntfs supported time granularity when
-	  updating the times in the inode in ntfs_setattr().
-	- Fixup handling of sparse, compressed, and encrypted attributes in
-	  fs/ntfs/inode.c::ntfs_read_locked_{,attr_,index_}inode(),
-	  fs/ntfs/aops.c::ntfs_{read,write}page().
-	- Make ntfs_write_block() not instantiate sparse blocks if they contain
-	  only zeroes.
-	- Optimize fs/ntfs/aops.c::ntfs_write_block() by extending the page
-	  lock protection over the buffer submission for i/o which allows the
-	  removal of the get_bh()/put_bh() pairs for each buffer.
-	- Fix fs/ntfs/aops.c::ntfs_{read,write}_block() to handle the case
-	  where a concurrent truncate has truncated the runlist under our feet.
-	- Fix page_has_buffers()/page_buffers() handling in fs/ntfs/aops.c.
-	- In fs/ntfs/aops.c::ntfs_end_buffer_async_read(), use a bit spin lock
-	  in the first buffer head instead of a driver global spin lock to
-	  improve scalability.
-	- Minor fix to error handling and error message display in
-	  fs/ntfs/aops.c::ntfs_prepare_nonresident_write().
-	- Change the mount options {u,f,d}mask to always parse the number as
-	  an octal number to conform to how chmod(1) works, too.  Thanks to
-	  Giuseppe Bilotta and Horst von Brand for pointing out the errors of
-	  my ways.
-	- Fix various bugs in the runlist merging code.  (Based on libntfs
-	  changes by Richard Russon.)
-	- Fix sparse warnings that have crept in over time.
-	- Change ntfs_cluster_free() to require a write locked runlist on entry
-	  since we otherwise get into a lock reversal deadlock if a read locked
-	  runlist is passed in. In the process also change it to take an ntfs
-	  inode instead of a vfs inode as parameter.
-	- Fix the definition of the CHKD ntfs record magic.  It had an off by
-	  two error causing it to be CHKB instead of CHKD.
-	- Fix a stupid bug in __ntfs_bitmap_set_bits_in_run() which caused the
-	  count to become negative and hence we had a wild memset() scribbling
-	  all over the system's ram.
-
-2.1.23 - Implement extension of resident files and make writing safe as well as
-	 many bug fixes, cleanups, and enhancements...
-
-	- Add printk rate limiting for ntfs_warning() and ntfs_error() when
-	  compiled without debug.  This avoids a possible denial of service
-	  attack.  Thanks to Carl-Daniel Hailfinger from SuSE for pointing this
-	  out.
-	- Fix compilation warnings on ia64.  (Randy Dunlap)
-	- Use i_size_{read,write}() instead of reading i_size by hand and cache
-	  the value where apropriate.
-	- Add size_lock to the ntfs_inode structure.  This is an rw spinlock
-	  and it locks against access to the inode sizes.  Note, ->size_lock
-	  is also accessed from irq context so you must use the _irqsave and
-	  _irqrestore lock and unlock functions, respectively.  Protect all
-	  accesses to allocated_size, initialized_size, and compressed_size.
-	- Minor optimization to fs/ntfs/super.c::ntfs_statfs() and its helpers.
-	- Implement extension of resident files in the regular file write code
-	  paths (fs/ntfs/aops.c::ntfs_{prepare,commit}_write()).  At present
-	  this only works until the data attribute becomes too big for the mft
-	  record after which we abort the write returning -EOPNOTSUPP from
-	  ntfs_prepare_write().
-	- Add disable_sparse mount option together with a per volume sparse
-	  enable bit which is set appropriately and a per inode sparse disable
-	  bit which is preset on some system file inodes as appropriate.
-	- Enforce that sparse support is disabled on NTFS volumes pre 3.0.
-	- Fix a bug in fs/ntfs/runlist.c::ntfs_mapping_pairs_decompress() in
-	  the creation of the unmapped runlist element for the base attribute
-	  extent.
-	- Split ntfs_map_runlist() into ntfs_map_runlist() and a non-locking
-	  helper ntfs_map_runlist_nolock() which is used by ntfs_map_runlist().
-	  This allows us to map runlist fragments with the runlist lock already
-	  held without having to drop and reacquire it around the call.  Adapt
-	  all callers.
-	- Change ntfs_find_vcn() to ntfs_find_vcn_nolock() which takes a locked
-	  runlist.  This allows us to find runlist elements with the runlist
-	  lock already held without having to drop and reacquire it around the
-	  call.  Adapt all callers.
-	- Change time to u64 in time.h::ntfs2utc() as it otherwise generates a
-	  warning in the do_div() call on sparc32.  Thanks to Meelis Roos for
-	  the report and analysis of the warning.
-	- Fix a nasty runlist merge bug when merging two holes.
-	- Set the ntfs_inode->allocated_size to the real allocated size in the
-	  mft record for resident attributes (fs/ntfs/inode.c).
-	- Small readability cleanup to use "a" instead of "ctx->attr"
-	  everywhere (fs/ntfs/inode.c).
-	- Make fs/ntfs/namei.c::ntfs_get_{parent,dentry} static and move the
-	  definition of ntfs_export_ops from fs/ntfs/super.c to namei.c.  Also,
-	  declare ntfs_export_ops in fs/ntfs/ntfs.h.
-	- Correct sparse file handling.  The compressed values need to be
-	  checked and set in the ntfs inode as done for compressed files and
-	  the compressed size needs to be used for vfs inode->i_blocks instead
-	  of the allocated size, again, as done for compressed files.
-	- Add AT_EA in addition to AT_DATA to whitelist for being allowed to be
-	  non-resident in fs/ntfs/attrib.c::ntfs_attr_can_be_non_resident().
-	- Add fs/ntfs/attrib.c::ntfs_attr_vcn_to_lcn_nolock() used by the new
-	  write code.
-	- Fix bug in fs/ntfs/attrib.c::ntfs_find_vcn_nolock() where after
-	  dropping the read lock and taking the write lock we were not checking
-	  whether someone else did not already do the work we wanted to do.
-	- Rename fs/ntfs/attrib.c::ntfs_find_vcn_nolock() to
-	  ntfs_attr_find_vcn_nolock() and update all callers.
-	- Add fs/ntfs/attrib.[hc]::ntfs_attr_make_non_resident().
-	- Fix sign of various error return values to be negative in
-	  fs/ntfs/lcnalloc.c.
-	- Modify ->readpage and ->writepage (fs/ntfs/aops.c) so they detect and
-	  handle the case where an attribute is converted from resident to
-	  non-resident by a concurrent file write.
-	- Remove checks for NULL before calling kfree() since kfree() does the
-	  checking itself.  (Jesper Juhl)
-	- Some utilities modify the boot sector but do not update the checksum.
-	  Thus, relax the checking in fs/ntfs/super.c::is_boot_sector_ntfs() to
-	  only emit a warning when the checksum is incorrect rather than
-	  refusing the mount.  Thanks to Bernd Casimir for pointing this
-	  problem out.
-	- Update attribute definition handling.
-	- Add NTFS_MAX_CLUSTER_SIZE and NTFS_MAX_PAGES_PER_CLUSTER constants.
-	- Use NTFS_MAX_CLUSTER_SIZE in super.c instead of hard coding 0x10000.
-	- Use MAX_BUF_PER_PAGE instead of variable sized array allocation for
-	  better code generation and one less sparse warning in fs/ntfs/aops.c.
-	- Remove spurious void pointer casts from fs/ntfs/.  (Pekka Enberg)
-	- Use C99 style structure initialization after memory allocation where
-	  possible (fs/ntfs/{attrib.c,index.c,super.c}).  Thanks to Al Viro and
-	  Pekka Enberg.
-	- Stamp the transaction log ($UsnJrnl), aka user space journal, if it
-	  is active on the volume and we are mounting read-write or remounting
-	  from read-only to read-write.
-	- Fix a bug in address space operations error recovery code paths where
-	  if the runlist was not mapped at all and a mapping error occured we
-	  would leave the runlist locked on exit to the function so that the
-	  next access to the same file would try to take the lock and deadlock.
-	- Detect the case when Windows has been suspended to disk on the volume
-	  to be mounted and if this is the case do not allow (re)mounting
-	  read-write.  This is done by parsing hiberfil.sys if present.
-	- Fix several occurences of a bug where we would perform 'var & ~const'
-	  with a 64-bit variable and a int, i.e. 32-bit, constant.  This causes
-	  the higher order 32-bits of the 64-bit variable to be zeroed.  To fix
-	  this cast the 'const' to the same 64-bit type as 'var'.
-	- Change the runlist terminator of the newly allocated cluster(s) to
-	  LCN_ENOENT in ntfs_attr_make_non_resident().  Otherwise the runlist
-	  code gets confused.
-	- Add an extra parameter @last_vcn to ntfs_get_size_for_mapping_pairs()
-	  and ntfs_mapping_pairs_build() to allow the runlist encoding to be
-	  partial which is desirable when filling holes in sparse attributes.
-	  Update all callers.
-	- Change ntfs_map_runlist_nolock() to only decompress the mapping pairs
-	  if the requested vcn is inside it.  Otherwise we get into problems
-	  when we try to map an out of bounds vcn because we then try to map
-	  the already mapped runlist fragment which causes
-	  ntfs_mapping_pairs_decompress() to fail and return error.  Update
-	  ntfs_attr_find_vcn_nolock() accordingly.
-	- Fix a nasty deadlock that appeared in recent kernels.
-	  The situation: VFS inode X on a mounted ntfs volume is dirty.  For
-	  same inode X, the ntfs_inode is dirty and thus corresponding on-disk
-	  inode, i.e. mft record, which is in a dirty PAGE_CACHE_PAGE belonging
-	  to the table of inodes, i.e. $MFT, inode 0.
-	  What happens:
-	  Process 1: sys_sync()/umount()/whatever...  calls
-	  __sync_single_inode() for $MFT -> do_writepages() -> write_page for
-	  the dirty page containing the on-disk inode X, the page is now locked
-	  -> ntfs_write_mst_block() which clears PageUptodate() on the page to
-	  prevent anyone else getting hold of it whilst it does the write out.
-	  This is necessary as the on-disk inode needs "fixups" applied before
-	  the write to disk which are removed again after the write and
-	  PageUptodate is then set again.  It then analyses the page looking
-	  for dirty on-disk inodes and when it finds one it calls
-	  ntfs_may_write_mft_record() to see if it is safe to write this
-	  on-disk inode.  This then calls ilookup5() to check if the
-	  corresponding VFS inode is in icache().  This in turn calls ifind()
-	  which waits on the inode lock via wait_on_inode whilst holding the
-	  global inode_lock.
-	  Process 2: pdflush results in a call to __sync_single_inode for the
-	  same VFS inode X on the ntfs volume.  This locks the inode (I_LOCK)
-	  then calls write-inode -> ntfs_write_inode -> map_mft_record() ->
-	  read_cache_page() for the page (in page cache of table of inodes
-	  $MFT, inode 0) containing the on-disk inode.  This page has
-	  PageUptodate() clear because of Process 1 (see above) so
-	  read_cache_page() blocks when it tries to take the page lock for the
-	  page so it can call ntfs_read_page().
-	  Thus Process 1 is holding the page lock on the page containing the
-	  on-disk inode X and it is waiting on the inode X to be unlocked in
-	  ifind() so it can write the page out and then unlock the page.
-	  And Process 2 is holding the inode lock on inode X and is waiting for
-	  the page to be unlocked so it can call ntfs_readpage() or discover
-	  that Process 1 set PageUptodate() again and use the page.
-	  Thus we have a deadlock due to ifind() waiting on the inode lock.
-	  The solution: The fix is to use the newly introduced
-	  ilookup5_nowait() which does not wait on the inode's lock and hence
-	  avoids the deadlock.  This is safe as we do not care about the VFS
-	  inode and only use the fact that it is in the VFS inode cache and the
-	  fact that the vfs and ntfs inodes are one struct in memory to find
-	  the ntfs inode in memory if present.  Also, the ntfs inode has its
-	  own locking so it does not matter if the vfs inode is locked.
-	- Fix bug in mft record writing where we forgot to set the device in
-	  the buffers when mapping them after the VM had discarded them.
-	  Thanks to Martin MOKREJÅ for the bug report.
-
-2.1.22 - Many bug and race fixes and error handling improvements.
-
-	- Improve error handling in fs/ntfs/inode.c::ntfs_truncate().
-	- Change fs/ntfs/inode.c::ntfs_truncate() to return an error code
-	  instead of void and provide a helper ntfs_truncate_vfs() for the
-	  vfs ->truncate method.
-	- Add a new ntfs inode flag NInoTruncateFailed() and modify
-	  fs/ntfs/inode.c::ntfs_truncate() to set and clear it appropriately.
-	- Fix min_size and max_size definitions in ATTR_DEF structure in
-	  fs/ntfs/layout.h to be signed.
-	- Add attribute definition handling helpers to fs/ntfs/attrib.[hc]:
-	  ntfs_attr_size_bounds_check(), ntfs_attr_can_be_non_resident(), and
-	  ntfs_attr_can_be_resident(), which in turn use the new private helper
-	  ntfs_attr_find_in_attrdef().
-	- In fs/ntfs/aops.c::mark_ntfs_record_dirty(), take the
-	  mapping->private_lock around the dirtying of the buffer heads
-	  analagous to the way it is done in __set_page_dirty_buffers().
-	- Ensure the mft record size does not exceed the PAGE_CACHE_SIZE at
-	  mount time as this cannot work with the current implementation.
-	- Check for location of attribute name and improve error handling in
-	  general in fs/ntfs/inode.c::ntfs_read_locked_inode() and friends.
-	- In fs/ntfs/aops.c::ntfs_writepage(), if the page is fully outside
-	  i_size, i.e. race with truncate, invalidate the buffers on the page
-	  so that they become freeable and hence the page does not leak.
-	- Remove unused function fs/ntfs/runlist.c::ntfs_rl_merge().  (Adrian
-	  Bunk)
-	- Fix stupid bug in fs/ntfs/attrib.c::ntfs_attr_find() that resulted in
-	  a NULL pointer dereference in the error code path when a corrupt
-	  attribute was found.  (Thanks to Domen Puncer for the bug report.)
-	- Add MODULE_VERSION() to fs/ntfs/super.c.
-	- Make several functions and variables static.  (Adrian Bunk)
-	- Modify fs/ntfs/aops.c::mark_ntfs_record_dirty() so it allocates
-	  buffers for the page if they are not present and then marks the
-	  buffers belonging to the ntfs record dirty.  This causes the buffers
-	  to become busy and hence they are safe from removal until the page
-	  has been written out.
-	- Fix stupid bug in fs/ntfs/attrib.c::ntfs_external_attr_find() in the
-	  error handling code path that resulted in a BUG() due to trying to
-	  unmap an extent mft record when the mapping of it had failed and it
-	  thus was not mapped.  (Thanks to Ken MacFerrin for the bug report.)
-	- Drop the runlist lock after the vcn has been read in
-	  fs/ntfs/lcnalloc.c::__ntfs_cluster_free().
-	- Rewrite handling of multi sector transfer errors.  We now do not set
-	  PageError() when such errors are detected in the async i/o handler
-	  fs/ntfs/aops.c::ntfs_end_buffer_async_read().  All users of mst
-	  protected attributes now check the magic of each ntfs record as they
-	  use it and act appropriately.  This has the effect of making errors
-	  granular per ntfs record rather than per page which solves the case
-	  where we cannot access any of the ntfs records in a page when a
-	  single one of them had an mst error.  (Thanks to Ken MacFerrin for
-	  the bug report.)
-	- Fix error handling in fs/ntfs/quota.c::ntfs_mark_quotas_out_of_date()
-	  where we failed to release i_mutex on the $Quota/$Q attribute inode.
-	- Fix bug in handling of bad inodes in fs/ntfs/namei.c::ntfs_lookup().
-	- Add mapping of unmapped buffers to all remaining code paths, i.e.
-	  fs/ntfs/aops.c::ntfs_write_mst_block(), mft.c::ntfs_sync_mft_mirror(),
-	  and write_mft_record_nolock().  From now on we require that the
-	  complete runlist for the mft mirror is always mapped into memory.
-	- Add creation of buffers to fs/ntfs/mft.c::ntfs_sync_mft_mirror().
-	- Improve error handling in fs/ntfs/aops.c::ntfs_{read,write}_block().
-	- Cleanup fs/ntfs/aops.c::ntfs_{read,write}page() since we know that a
-	  resident attribute will be smaller than a page which makes the code
-	  simpler.  Also make the code more tolerant to concurrent ->truncate.
-
-2.1.21 - Fix some races and bugs, rewrite mft write code, add mft allocator.
-
-	- Implement extent mft record deallocation
-	  fs/ntfs/mft.c::ntfs_extent_mft_record_free().
-	- Splitt runlist related functions off from attrib.[hc] to runlist.[hc].
-	- Add vol->mft_data_pos and initialize it at mount time.
-	- Rename init_runlist() to ntfs_init_runlist(), ntfs_vcn_to_lcn() to
-	  ntfs_rl_vcn_to_lcn(), decompress_mapping_pairs() to
-	  ntfs_mapping_pairs_decompress(), ntfs_merge_runlists() to
-	  ntfs_runlists_merge() and adapt all callers.
-	- Add fs/ntfs/runlist.[hc]::ntfs_get_nr_significant_bytes(),
-	  ntfs_get_size_for_mapping_pairs(), ntfs_write_significant_bytes(),
-	  and ntfs_mapping_pairs_build(), adapted from libntfs.
-	- Make fs/ntfs/lcnalloc.c::ntfs_cluster_free_from_rl_nolock() not
-	  static and add a declaration for it to lcnalloc.h.
-	- Add fs/ntfs/lcnalloc.h::ntfs_cluster_free_from_rl() which is a static
-	  inline wrapper for ntfs_cluster_free_from_rl_nolock() which takes the
-	  cluster bitmap lock for the duration of the call.
-	- Add fs/ntfs/attrib.[hc]::ntfs_attr_record_resize().
-	- Implement the equivalent of memset() for an ntfs attribute in
-	  fs/ntfs/attrib.[hc]::ntfs_attr_set() and switch
-	  fs/ntfs/logfile.c::ntfs_empty_logfile() to using it.
-	- Remove unnecessary casts from LCN_* constants.
-	- Implement fs/ntfs/runlist.c::ntfs_rl_truncate_nolock().
-	- Add MFT_RECORD_OLD as a copy of MFT_RECORD in fs/ntfs/layout.h and
-	  change MFT_RECORD to contain the NTFS 3.1+ specific fields.
-	- Add a helper function fs/ntfs/aops.c::mark_ntfs_record_dirty() which
-	  marks all buffers belonging to an ntfs record dirty, followed by
-	  marking the page the ntfs record is in dirty and also marking the vfs
-	  inode containing the ntfs record dirty (I_DIRTY_PAGES).
-	- Switch fs/ntfs/index.h::ntfs_index_entry_mark_dirty() to using the
-	  new helper fs/ntfs/aops.c::mark_ntfs_record_dirty() and remove the no
-	  longer needed fs/ntfs/index.[hc]::__ntfs_index_entry_mark_dirty().
-	- Move ntfs_{un,}map_page() from ntfs.h to aops.h and fix resulting
-	  include errors.
-	- Move the typedefs for runlist_element and runlist from types.h to
-	  runlist.h and fix resulting include errors.
-	- Remove unused {__,}format_mft_record() from fs/ntfs/mft.c.
-	- Modify fs/ntfs/mft.c::__mark_mft_record_dirty() to use the helper
-	  mark_ntfs_record_dirty() which also changes the behaviour in that we
-	  now set the buffers belonging to the mft record dirty as well as the
-	  page itself.
-	- Update fs/ntfs/mft.c::write_mft_record_nolock() and sync_mft_mirror()
-	  to cope with the fact that there now are dirty buffers in mft pages.
-	- Update fs/ntfs/inode.c::ntfs_write_inode() to also use the helper
-	  mark_ntfs_record_dirty() and thus to set the buffers belonging to the
-	  mft record dirty as well as the page itself.
-	- Fix compiler warnings on x86-64 in fs/ntfs/dir.c.  (Randy Dunlap,
-	  slightly modified by me)
-	- Add fs/ntfs/mft.c::try_map_mft_record() which fails with -EALREADY if
-	  the mft record is already locked and otherwise behaves the same way
-	  as fs/ntfs/mft.c::map_mft_record().
-	- Modify fs/ntfs/mft.c::write_mft_record_nolock() so that it only
-	  writes the mft record if the buffers belonging to it are dirty.
-	  Otherwise we assume that it was written out by other means already.
-	- Attempting to write outside initialized size is _not_ a bug so remove
-	  the bug check from fs/ntfs/aops.c::ntfs_write_mst_block().  It is in
-	  fact required to write outside initialized size when preparing to
-	  extend the initialized size.
-	- Map the page instead of using page_address() before writing to it in
-	  fs/ntfs/aops.c::ntfs_mft_writepage().
-	- Provide exclusion between opening an inode / mapping an mft record
-	  and accessing the mft record in fs/ntfs/mft.c::ntfs_mft_writepage()
-	  by setting the page not uptodate throughout ntfs_mft_writepage().
-	- Clear the page uptodate flag in fs/ntfs/aops.c::ntfs_write_mst_block()
-	  to ensure noone can see the page whilst the mst fixups are applied.
-	- Add the helper fs/ntfs/mft.c::ntfs_may_write_mft_record() which
-	  checks if an mft record may be written out safely obtaining any
-	  necessary locks in the process.  This is used by
-	  fs/ntfs/aops.c::ntfs_write_mst_block().
-	- Modify fs/ntfs/aops.c::ntfs_write_mst_block() to also work for
-	  writing mft records and improve its error handling in the process.
-	  Now if any of the records in the page fail to be written out, all
-	  other records will be written out instead of aborting completely.
-	- Remove ntfs_mft_aops and update all users to use ntfs_mst_aops.
-	- Modify fs/ntfs/inode.c::ntfs_read_locked_inode() to set the
-	  ntfs_mst_aops for all inodes which are NInoMstProtected() and
-	  ntfs_aops for all other inodes.
-	- Rename fs/ntfs/mft.c::sync_mft_mirror{,_umount}() to
-	  ntfs_sync_mft_mirror{,_umount}() and change their parameters so they
-	  no longer require an ntfs inode to be present.  Update all callers.
-	- Cleanup the error handling in fs/ntfs/mft.c::ntfs_sync_mft_mirror().
-	- Clear the page uptodate flag in fs/ntfs/mft.c::ntfs_sync_mft_mirror()
-	  to ensure noone can see the page whilst the mst fixups are applied.
-	- Remove the no longer needed fs/ntfs/mft.c::ntfs_mft_writepage() and
-	  fs/ntfs/mft.c::try_map_mft_record().
-	- Fix callers of fs/ntfs/aops.c::mark_ntfs_record_dirty() to call it
-	  with the ntfs inode which contains the page rather than the ntfs
-	  inode the mft record of which is in the page.
-	- Fix race condition in fs/ntfs/inode.c::ntfs_put_inode() by moving the
-	  index inode bitmap inode release code from there to
-	  fs/ntfs/inode.c::ntfs_clear_big_inode().  (Thanks to Christoph
-	  Hellwig for spotting this.)
-	- Fix race condition in fs/ntfs/inode.c::ntfs_put_inode() by taking the
-	  inode semaphore around the code that sets ni->itype.index.bmp_ino to
-	  NULL and reorganize the code to optimize it a bit.  (Thanks to
-	  Christoph Hellwig for spotting this.)
-	- Modify fs/ntfs/aops.c::mark_ntfs_record_dirty() to no longer take the
-	  ntfs inode as a parameter as this is confusing and misleading and the
-	  needed ntfs inode is available via NTFS_I(page->mapping->host).
-	  Adapt all callers to this change.
-	- Modify fs/ntfs/mft.c::write_mft_record_nolock() and
-	  fs/ntfs/aops.c::ntfs_write_mst_block() to only check the dirty state
-	  of the first buffer in a record and to take this as the ntfs record
-	  dirty state.  We cannot look at the dirty state for subsequent
-	  buffers because we might be racing with
-	  fs/ntfs/aops.c::mark_ntfs_record_dirty().
-	- Move the static inline ntfs_init_big_inode() from fs/ntfs/inode.c to
-	  inode.h and make fs/ntfs/inode.c::__ntfs_init_inode() non-static and
-	  add a declaration for it to inode.h.  Fix some compilation issues
-	  that resulted due to #includes and header file interdependencies.
-	- Simplify setup of i_mode in fs/ntfs/inode.c::ntfs_read_locked_inode().
-	- Add helpers fs/ntfs/layout.h::MK_MREF() and MK_LE_MREF().
-	- Modify fs/ntfs/mft.c::map_extent_mft_record() to only verify the mft
-	  record sequence number if it is specified (i.e. not zero).
-	- Add fs/ntfs/mft.[hc]::ntfs_mft_record_alloc() and various helper
-	  functions used by it.
-	- Update Documentation/filesystems/ntfs.txt with instructions on how to
-	  use the Device-Mapper driver with NTFS ftdisk/LDM raid.  This removes
-	  the linear raid problem with the Software RAID / MD driver when one
-	  or more of the devices has an odd number of sectors.
-
-2.1.20 - Fix two stupid bugs introduced in 2.1.18 release.
-
-	- Fix stupid bug in fs/ntfs/attrib.c::ntfs_attr_reinit_search_ctx()
-	  where we did not clear ctx->al_entry but it was still set due to
-	  changes in ntfs_attr_lookup() and ntfs_external_attr_find() in
-	  particular.
-	- Fix another stupid bug in fs/ntfs/attrib.c::ntfs_external_attr_find()
-	  where we forgot to unmap the extent mft record when we had finished
-	  enumerating an attribute which caused a bug check to trigger when the
-	  VFS calls ->clear_inode.
-
-2.1.19 - Many cleanups, improvements, and a minor bug fix.
-
-	- Update ->setattr (fs/ntfs/inode.c::ntfs_setattr()) to refuse to
-	  change the uid, gid, and mode of an inode as we do not support NTFS
-	  ACLs yet.
-	- Remove BKL use from ntfs_setattr() syncing up with the rest of the
-	  kernel.
-	- Get rid of the ugly transparent union in fs/ntfs/dir.c::ntfs_readdir()
-	  and ntfs_filldir() as per suggestion from Al Viro.
-	- Change '\0' and L'\0' to simply 0 as per advice from Linus Torvalds.
-	- Update ->truncate (fs/ntfs/inode.c::ntfs_truncate()) to check if the
-	  inode size has changed and to only output an error if so.
-	- Rename fs/ntfs/attrib.h::attribute_value_length() to ntfs_attr_size().
-	- Add le{16,32,64} as well as sle{16,32,64} data types to
-	  fs/ntfs/types.h.
-	- Change ntfschar to be le16 instead of u16 in fs/ntfs/types.h.
-	- Add le versions of VCN, LCN, and LSN called leVCN, leLCN, and leLSN,
-	  respectively, to fs/ntfs/types.h.
-	- Update endianness conversion macros in fs/ntfs/endian.h to use the
-	  new types as appropriate.
-	- Do proper type casting when using sle64_to_cpup() in fs/ntfs/dir.c
-	  and index.c.
-	- Add leMFT_REF data type to fs/ntfs/layout.h.
-	- Update all NTFS header files with the new little endian data types.
-	  Affected files are fs/ntfs/layout.h, logfile.h, and time.h.
-	- Do proper type casting when using ntfs_is_*_recordp() in
-	  fs/ntfs/logfile.c, mft.c, and super.c. 
-	- Fix all the sparse bitwise warnings.  Had to change all the typedef
-	  enums storing little endian values to simple enums plus a typedef for
-	  the datatype to make sparse happy.
-	- Fix a bug found by the new sparse bitwise warnings where the default
-	  upcase table was defined as a pointer to wchar_t rather than ntfschar
-	  in fs/ntfs/ntfs.h and super.c.
-	- Change {const_,}cpu_to_le{16,32}(0) to just 0 as suggested by Al Viro.
-
-2.1.18 - Fix scheduling latencies at mount time as well as an endianness bug.
-
-	- Remove vol->nr_mft_records as it was pretty meaningless and optimize
-	  the calculation of total/free inodes as used by statfs().
-	- Fix scheduling latencies in ntfs_fill_super() by dropping the BKL
-	  because the code itself is using the ntfs_lock semaphore which
-	  provides safe locking.  (Ingo Molnar)
-	- Fix a potential bug in fs/ntfs/mft.c::map_extent_mft_record() that
-	  could occur in the future for when we start closing/freeing extent
-	  inodes if we don't set base_ni->ext.extent_ntfs_inos to NULL after
-	  we free it.
-	- Rename {find,lookup}_attr() to ntfs_attr_{find,lookup}() as well as
-	  find_external_attr() to ntfs_external_attr_find() to cleanup the
-	  namespace a bit and to be more consistent with libntfs.
-	- Rename {{re,}init,get,put}_attr_search_ctx() to
-	  ntfs_attr_{{re,}init,get,put}_search_ctx() as well as the type
-	  attr_search_context to ntfs_attr_search_ctx.
-	- Force use of ntfs_attr_find() in ntfs_attr_lookup() when searching
-	  for the attribute list attribute itself.
-	- Fix endianness bug in ntfs_external_attr_find().
-	- Change ntfs_{external_,}attr_find() to return 0 on success, -ENOENT
-	  if the attribute is not found, and -EIO on real error.  In the case
-	  of -ENOENT, the search context is updated to describe the attribute
-	  before which the attribute being searched for would need to be
-	  inserted if such an action were to be desired and in the case of
-	  ntfs_external_attr_find() the search context is also updated to
-	  indicate the attribute list entry before which the attribute list
-	  entry of the attribute being searched for would need to be inserted
-	  if such an action were to be desired.  Also make ntfs_find_attr()
-	  static and remove its prototype from attrib.h as it is not used
-	  anywhere other than attrib.c.  Update ntfs_attr_lookup() and all
-	  callers of ntfs_{external,}attr_{find,lookup}() for the new return
-	  values.
-	- Minor cleanup of fs/ntfs/inode.c::ntfs_init_locked_inode().
-
-2.1.17 - Fix bugs in mount time error code paths and other updates.
-
-	- Implement bitmap modification code (fs/ntfs/bitmap.[hc]).  This
-	  includes functions to set/clear a single bit or a run of bits.
-	- Add fs/ntfs/attrib.[hc]::ntfs_find_vcn() which returns the locked
-	  runlist element containing a particular vcn.  It also takes care of
-	  mapping any needed runlist fragments.
-	- Implement cluster (de-)allocation code (fs/ntfs/lcnalloc.[hc]).
-	- Load attribute definition table from $AttrDef at mount time.
-	- Fix bugs in mount time error code paths involving (de)allocation of
-	  the default and volume upcase tables.
-	- Remove ntfs_nr_mounts as it is no longer used.
-
-2.1.16 - Implement access time updates, file sync, async io, and read/writev.
-
-	- Add support for readv/writev and aio_read/aio_write (fs/ntfs/file.c).
-	  This is done by setting the appropriate file operations pointers to
-	  the generic helper functions provided by mm/filemap.c.
-	- Implement fsync, fdatasync, and msync both for files (fs/ntfs/file.c)
-	  and directories (fs/ntfs/dir.c).
-	- Add support for {a,m,c}time updates to inode.c::ntfs_write_inode().
-	  Note, except for the root directory and any other system files opened
-	  by the user, the system files will not have their access times
-	  updated as they are only accessed at the inode level an hence the
-	  file level functions which cause the times to be updated are never
-	  invoked.
-
-2.1.15 - Invalidate quotas when (re)mounting read-write.
-
-	- Add new element itype.index.collation_rule to the ntfs inode
-	  structure and set it appropriately in ntfs_read_locked_inode().
-	- Implement a new inode type "index" to allow efficient access to the
-	  indices found in various system files and adapt inode handling
-	  accordingly (fs/ntfs/inode.[hc]).  An index inode is essentially an
-	  attribute inode (NInoAttr() is true) with an attribute type of
-	  AT_INDEX_ALLOCATION.  As such, it is no longer allowed to call
-	  ntfs_attr_iget() with an attribute type of AT_INDEX_ALLOCATION as
-	  there would be no way to distinguish between normal attribute inodes
-	  and index inodes.  The function to obtain an index inode is
-	  ntfs_index_iget() and it uses the helper function
-	  ntfs_read_locked_index_inode().  Note, we do not overload
-	  ntfs_attr_iget() as indices consist of multiple attributes so using
-	  ntfs_attr_iget() to obtain an index inode would be confusing.
-	- Ensure that there is no overflow when doing page->index <<
-	  PAGE_CACHE_SHIFT by casting page->index to s64 in fs/ntfs/aops.c.
-	- Use atomic kmap instead of kmap() in fs/ntfs/aops.c::ntfs_read_page()
-	  and ntfs_read_block().
-	- Use case sensitive attribute lookups instead of case insensitive ones.
-	- Lock all page cache pages belonging to mst protected attributes while
-	  accessing them to ensure we never see corrupt data while the page is
-	  under writeout.
-	- Add framework for generic ntfs collation (fs/ntfs/collation.[hc]).
-	  We have ntfs_is_collation_rule_supported() to check if the collation
-	  rule you want to use is supported and ntfs_collation() which actually
-	  collates two data items.  We currently only support COLLATION_BINARY
-	  and COLLATION_NTOFS_ULONG but support for other collation rules will
-	  be added as the need arises.
-	- Add a new type, ntfs_index_context, to allow retrieval of an index
-	  entry using the corresponding index key.  To get an index context,
-	  use ntfs_index_ctx_get() and to release it, use ntfs_index_ctx_put().
-	  This also adds a new slab cache for the index contexts.  To lookup a
-	  key in an index inode, use ntfs_index_lookup().  After modifying an
-	  index entry, call ntfs_index_entry_flush_dcache_page() followed by
-	  ntfs_index_entry_mark_dirty() to ensure the changes are written out
-	  to disk.  For details see fs/ntfs/index.[hc].  Note, at present, if
-	  an index entry is in the index allocation attribute rather than the
-	  index root attribute it will not be written out (you will get a
-	  warning message about discarded changes instead).
-	- Load the quota file ($Quota) and check if quota tracking is enabled
-	  and if so, mark the quotas out of date.  This causes windows to
-	  rescan the volume on boot and update all quota entries.
-	- Add a set_page_dirty address space operation for ntfs_m[fs]t_aops.
-	  It is simply set to __set_page_dirty_nobuffers() to make sure that
-	  running set_page_dirty() on a page containing mft/ntfs records will
-	  not affect the dirty state of the page buffers.
-	- Add fs/ntfs/index.c::__ntfs_index_entry_mark_dirty() which sets all
-	  buffers that are inside the ntfs record in the page dirty after which
-	  it sets the page dirty.  This allows ->writepage to only write the
-	  dirty index records rather than having to write all the records in
-	  the page.  Modify fs/ntfs/index.h::ntfs_index_entry_mark_dirty() to
-	  use this rather than __set_page_dirty_nobuffers().
-	- Implement fs/ntfs/aops.c::ntfs_write_mst_block() which enables the
-	  writing of page cache pages belonging to mst protected attributes
-	  like the index allocation attribute in directory indices and other
-	  indices like $Quota/$Q, etc.  This means that the quota is now marked
-	  out of date on all volumes rather than only on ones where the quota
-	  defaults entry is in the index root attribute of the $Quota/$Q index.
-
-2.1.14 - Fix an NFSd caused deadlock reported by several users.
-
-	- Modify fs/ntfs/ntfs_readdir() to copy the index root attribute value
-	  to a buffer so that we can put the search context and unmap the mft
-	  record before calling the filldir() callback.  We need to do this
-	  because of NFSd which calls ->lookup() from its filldir callback()
-	  and this causes NTFS to deadlock as ntfs_lookup() maps the mft record
-	  of the directory and since ntfs_readdir() has got it mapped already
-	  ntfs_lookup() deadlocks.
-
-2.1.13 - Enable overwriting of resident files and housekeeping of system files.
-
-	- Implement writing of mft records (fs/ntfs/mft.[hc]), which includes
-	  keeping the mft mirror in sync with the mft when mirrored mft records
-	  are written.  The functions are write_mft_record{,_nolock}().  The
-	  implementation is quite rudimentary for now with lots of things not
-	  implemented yet but I am not sure any of them can actually occur so
-	  I will wait for people to hit each one and only then implement it.
-	- Commit open system inodes at umount time.  This should make it
-	  virtually impossible for sync_mft_mirror_umount() to ever be needed.
-	- Implement ->write_inode (fs/ntfs/inode.c::ntfs_write_inode()) for the
-	  ntfs super operations.  This gives us inode writing via the VFS inode
-	  dirty code paths.  Note:  Access time updates are not implemented yet.
-	- Implement fs/ntfs/mft.[hc]::{,__}mark_mft_record_dirty() and make
-	  fs/ntfs/aops.c::ntfs_writepage() and ntfs_commit_write() use it, thus
-	  finally enabling resident file overwrite!  (-8  This also includes a
-	  placeholder for ->writepage (ntfs_mft_writepage()), which for now
-	  just redirties the page and returns.  Also, at umount time, we for
-	  now throw away all mft data page cache pages after the last call to
-	  ntfs_commit_inode() in the hope that all inodes will have been
-	  written out by then and hence no dirty (meta)data will be lost.  We
-	  also check for this case and emit an error message telling the user
-	  to run chkdsk.
-	- Use set_page_writeback() and end_page_writeback() in the resident
-	  attribute code path of fs/ntfs/aops.c::ntfs_writepage() otherwise
-	  the radix-tree tag PAGECACHE_TAG_DIRTY remains set even though the
-	  page is clean.
-	- Implement ntfs_mft_writepage() so it now checks if any of the mft
-	  records in the page are dirty and if so redirties the page and
-	  returns.  Otherwise it just returns (after doing set_page_writeback(),
-	  unlock_page(), end_page_writeback() or the radix-tree tag
-	  PAGECACHE_TAG_DIRTY remains set even though the page is clean), thus
-	  alowing the VM to do with the page as it pleases.  Also, at umount
-	  time, now only throw away dirty mft (meta)data pages if dirty inodes
-	  are present and ask the user to email us if they see this happening.
-	- Add functions ntfs_{clear,set}_volume_flags(), to modify the volume
-	  information flags (fs/ntfs/super.c).
-	- Mark the volume dirty when (re)mounting read-write and mark it clean
-	  when unmounting or remounting read-only.  If any volume errors are
-	  found, the volume is left marked dirty to force chkdsk to run.
-	- Add code to set the NT4 compatibility flag when (re)mounting
-	  read-write for newer NTFS versions but leave it commented out for now
-	  since we do not make any modifications that are NTFS 1.2 specific yet
-	  and since setting this flag breaks Captive-NTFS which is not nice.
-	  This code must be enabled once we start writing NTFS 1.2 specific
-	  changes otherwise Windows NTFS driver might crash / cause corruption.
-
-2.1.12 - Fix the second fix to the decompression engine and some cleanups.
-
-	- Add a new address space operations struct, ntfs_mst_aops, for mst
-	  protected attributes.  This is because the default ntfs_aops do not
-	  make sense with mst protected data and were they to write anything to
-	  such an attribute they would cause data corruption so we provide
-	  ntfs_mst_aops which does not have any write related operations set.
-	- Cleanup dirty ntfs inode handling (fs/ntfs/inode.[hc]) which also
-	  includes an adapted ntfs_commit_inode() and an implementation of
-	  ntfs_write_inode() which for now just cleans dirty inodes without
-	  writing them (it does emit a warning that this is happening).
-	- Undo the second decompression engine fix (see 2.1.9 release ChangeLog
-	  entry) as it was only fixing a theoretical bug but at the same time
-	  it badly broke the handling of sparse and uncompressed compression
-	  blocks.
-
-2.1.11 - Driver internal cleanups.
-
-	- Only build logfile.o if building the driver with read-write support.
-	- Really final white space cleanups.
-	- Use generic_ffs() instead of ffs() in logfile.c which allows the
-	  log_page_size variable to be optimized by gcc into a constant.
-	- Rename uchar_t to ntfschar everywhere as uchar_t is unsigned 1-byte
-	  char as defined by POSIX and as found on some systems.
-
-2.1.10 - Force read-only (re)mounting of volumes with unsupported volume flags.
-
-	- Finish off the white space cleanups (remove trailing spaces, etc).
-	- Clean up ntfs_fill_super() and ntfs_read_inode_mount() by removing
-	  the kludges around the first iget().  Instead of (re)setting ->s_op
-	  we have the $MFT inode set up by explicit new_inode() / set ->i_ino /
-	  insert_inode_hash() / call ntfs_read_inode_mount() directly.  This
-	  kills the need for second super_operations and allows to return error
-	  from ntfs_read_inode_mount() without resorting to ugly "poisoning"
-	  tricks.  (Al Viro)
-	- Force read-only (re)mounting if any of the following bits are set in
-	  the volume information flags:
-	  	VOLUME_IS_DIRTY, VOLUME_RESIZE_LOG_FILE,
-		VOLUME_UPGRADE_ON_MOUNT, VOLUME_DELETE_USN_UNDERWAY,
-		VOLUME_REPAIR_OBJECT_ID, VOLUME_MODIFIED_BY_CHKDSK
-	  To make this easier we define VOLUME_MUST_MOUNT_RO_MASK with all the
-	  above bits set so the test is made easy.
-
-2.1.9 - Fix two bugs in decompression engine.
-
-	- Fix a bug where we would not always detect that we have reached the
-	  end of a compression block because we were ending at minus one byte
-	  which is effectively the same as being at the end.  The fix is to
-	  check whether the uncompressed buffer has been fully filled and if so
-	  we assume we have reached the end of the compression block.  A big
-	  thank you to Marcin Gibuła for the bug report, the assistance in
-	  tracking down the bug and testing the fix.
-	- Fix a possible bug where when a compressed read is truncated to the
-	  end of the file, the offset inside the last page was not truncated.
-
-2.1.8 - Handle $MFT mirror and $LogFile, improve time handling, and cleanups.
-
-	- Use get_bh() instead of manual atomic_inc() in fs/ntfs/compress.c.
-	- Modify fs/ntfs/time.c::ntfs2utc(), get_current_ntfs_time(), and
-	  utc2ntfs() to work with struct timespec instead of time_t on the
-	  Linux UTC time side thus preserving the full precision of the NTFS
-	  time and only loosing up to 99 nano-seconds in the Linux UTC time.
-	- Move fs/ntfs/time.c to fs/ntfs/time.h and make the time functions
-	  static inline.
-	- Remove unused ntfs_dirty_inode().
-	- Cleanup super operations declaration in fs/ntfs/super.c.
-	- Wrap flush_dcache_mft_record_page() in #ifdef NTFS_RW.
-	- Add NInoTestSetFoo() and NInoTestClearFoo() macro magic to
-	  fs/ntfs/inode.h and use it to declare NInoTest{Set,Clear}Dirty.
-	- Move typedefs for ntfs_attr and test_t from fs/ntfs/inode.c to
-	  fs/ntfs/inode.h so they can be used elsewhere.
-	- Determine the mft mirror size as the number of mirrored mft records
-	  and store it in ntfs_volume->mftmirr_size (fs/ntfs/super.c).
-	- Load the mft mirror at mount time and compare the mft records stored
-	  in it to the ones in the mft.  Force a read-only mount if the two do
-	  not match (fs/ntfs/super.c).
-	- Fix type casting related warnings on 64-bit architectures.  Thanks
-	  to Meelis Roos for reporting them.
-	- Move %L to %ll as %L is floating point and %ll is integer which is
-	  what we want.
-	- Read the journal ($LogFile) and determine if the volume has been
-	  shutdown cleanly and force a read-only mount if not (fs/ntfs/super.c
-	  and fs/ntfs/logfile.c).  This is a little bit of a crude check in
-	  that we only look at the restart areas and not at the actual log
-	  records so that there will be a very small number of cases where we
-	  think that a volume is dirty when in fact it is clean.  This should
-	  only affect volumes that have not been shutdown cleanly and did not
-	  have any pending, non-check-pointed i/o.
-	- If the $LogFile indicates a clean shutdown and a read-write (re)mount
-	  is requested, empty $LogFile by overwriting it with 0xff bytes to
-	  ensure that Windows cannot cause data corruption by replaying a stale
-	  journal after Linux has written to the volume.
-
-2.1.7 - Enable NFS exporting of mounted NTFS volumes.
-
-	- Set i_generation in the VFS inode from the seq_no of the NTFS inode.
-	- Make ntfs_lookup() NFS export safe, i.e. use d_splice_alias(), etc.
-	- Implement ->get_dentry() in fs/ntfs/namei.c::ntfs_get_dentry() as the
-	  default doesn't allow inode number 0 which is a valid inode on NTFS
-	  and even if it did allow that it uses iget() instead of ntfs_iget()
-	  which makes it useless for us.
-	- Implement ->get_parent() in fs/ntfs/namei.c::ntfs_get_parent() as the
-	  default just returns -EACCES which is not very useful.
-	- Define export operations (->s_export_op) for NTFS (ntfs_export_ops)
-	  and set them up in the super block at mount time (super.c) this
-	  allows mounted NTFS volumes to be exported via NFS.
-	- Add missing return -EOPNOTSUPP; in
-	  fs/ntfs/aops.c::ntfs_commit_nonresident_write().
-	- Enforce no atime and no dir atime updates at mount/remount time as
-	  they are not implemented yet anyway.
-	- Move a few assignments in fs/ntfs/attrib.c::load_attribute_list() to
-	  after a NULL check.  Thanks to Dave Jones for pointing this out.
-
-2.1.6 - Fix minor bug in handling of compressed directories.
-
-	- Fix bug in handling of compressed directories.  A compressed
-	  directory is not really compressed so when we set the ->i_blocks
-	  field of a compressed directory inode we were setting it from the
-	  non-existing field ni->itype.compressed.size which gave random
-	  results...  For directories we now always use ni->allocated_size.
-
-2.1.5 - Fix minor bug in attribute list attribute handling.
-
-	- Fix bug in attribute list handling.  Actually it is not as much a bug
-	  as too much protection in that we were not allowing attribute lists
-	  which waste space on disk while Windows XP clearly allows it and in
-	  fact creates such attribute lists so our driver was failing.
-	- Update NTFS documentation ready for 2.6 kernel release.
-
-2.1.4 - Reduce compiler requirements.
-
-	- Remove all uses of unnamed structs and unions in the driver to make
-	  old and newer gcc versions happy. Makes it a bit uglier IMO but at
-	  least people will stop hassling me about it.
-
-2.1.3 - Important bug fixes in corner cases.
-
-	- super.c::parse_ntfs_boot_sector(): Correct the check for 64-bit
-	  clusters. (Philipp Thomas)
-	- attrib.c::load_attribute_list(): Fix bug when initialized_size is a
-	  multiple of the block_size but not the cluster size. (Szabolcs
-	  Szakacsits)
-
-2.1.2 - Important bug fixes aleviating the hangs in statfs.
-
-	- Fix buggy free cluster and free inode determination logic.
-
-2.1.1 - Minor updates.
-
-	- Add handling for initialized_size != data_size in compressed files.
-	- Reduce function local stack usage from 0x3d4 bytes to just noise in
-	  fs/ntfs/upcase.c. (Randy Dunlap)
-	- Remove compiler warnings for newer gcc.
-	- Pages are no longer kmapped by mm/filemap.c::generic_file_write()
-	  around calls to ->{prepare,commit}_write.  Adapt NTFS appropriately
-	  in fs/ntfs/aops.c::ntfs_prepare_nonresident_write() by using
-	  kmap_atomic(KM_USER0).
-
-2.1.0 - First steps towards write support: implement file overwrite.
-
-	- Add configuration option for developmental write support with an
-	  appropriately scary configuration help text.
-	- Initial implementation of fs/ntfs/aops.c::ntfs_writepage() and its
-	  helper fs/ntfs/aops.c::ntfs_write_block(). This enables mmap(2) based
-	  overwriting of existing files on ntfs. Note: Resident files are
-	  only written into memory, and not written out to disk at present, so
-	  avoid writing to files smaller than about 1kiB.
-	- Initial implementation of fs/ntfs/aops.c::ntfs_prepare_write(), its
-	  helper fs/ntfs/aops.c::ntfs_prepare_nonresident_write() and their
-	  counterparts, fs/ntfs/aops.c::ntfs_commit_write(), and
-	  fs/ntfs/aops.c::ntfs_commit_nonresident_write(), respectively. Also,
-	  add generic_file_write() to the ntfs file operations (fs/ntfs/file.c).
-	  This enables write(2) based overwriting of existing files on ntfs.
-	  Note: As with mmap(2) based overwriting, resident files are only
-	  written into memory, and not written out to disk at present, so avoid
-	  writing to files smaller than about 1kiB.
-	- Implement ->truncate (fs/ntfs/inode.c::ntfs_truncate()) and
-	  ->setattr() (fs/ntfs/inode.c::ntfs_setattr()) inode operations for
-	  files with the purpose of intercepting and aborting all i_size
-	  changes which we do not support yet. ntfs_truncate() actually only
-	  emits a warning message but AFAICS our interception of i_size changes
-	  elsewhere means ntfs_truncate() never gets called for i_size changes.
-	  It is only called from generic_file_write() when we fail in
-	  ntfs_prepare_{,nonresident_}write() in order to discard any
-	  instantiated buffers beyond i_size. Thus i_size is not actually
-	  changed so our warning message is enough. Unfortunately it is not
-	  possible to easily determine if i_size is being changed or not hence
-	  we just emit an appropriately worded error message.
-
-2.0.25 - Small bug fixes and cleanups.
-
-	- Unlock the page in an out of memory error code path in
-	  fs/ntfs/aops.c::ntfs_read_block().
-	- If fs/ntfs/aops.c::ntfs_read_page() is called on an uptodate page,
-	  just unlock the page and return. (This can happen due to ->writepage
-	  clearing PageUptodate() during write out of MstProtected()
-	  attributes.
-	- Remove leaked write code again.
-
-2.0.24 - Cleanups.
-
-	- Treat BUG_ON() as ASSERT() not VERIFY(), i.e. do not use side effects
-	  inside BUG_ON(). (Adam J. Richter)
-	- Split logical OR expressions inside BUG_ON() into individual BUG_ON()
-	  calls for improved debugging. (Adam J. Richter)
-	- Add errors flag to the ntfs volume state, accessed via
-	  NVol{,Set,Clear}Errors(vol).
-	- Do not allow read-write remounts of read-only volumes with errors.
-	- Clarify comment for ntfs file operation sendfile which was added by
-	  Christoph Hellwig a while ago (just using generic_file_sendfile())
-	  to say that ntfs ->sendfile is only used for the case where the
-	  source data is on the ntfs partition and the destination is
-	  somewhere else, i.e. nothing we need to concern ourselves with.
-	- Add generic_file_write() as our ntfs file write operation.
-
-2.0.23 - Major bug fixes (races, deadlocks, non-i386 architectures).
-
-	- Massive internal locking changes to mft record locking. Fixes lock
-	  recursion and replaces the mrec_lock read/write semaphore with a
-	  mutex. Also removes the now superfluous mft_count. This fixes several
-	  race conditions and deadlocks, especially in the future write code.
-	- Fix ntfs over loopback for compressed files by adding an
-	  optimization barrier. (gcc was screwing up otherwise ?)
-	- Miscellaneous cleanups all over the code and a fix or two in error
-	  handling code paths.
-	Thanks go to Christoph Hellwig for pointing out the following two:
-	- Remove now unused function fs/ntfs/malloc.h::vmalloc_nofs().
-	- Fix ntfs_free() for ia64 and parisc by checking for VMALLOC_END, too.
-
-2.0.22 - Cleanups, mainly to ntfs_readdir(), and use C99 initializers.
-
-	- Change fs/ntfs/dir.c::ntfs_reddir() to only read/write ->f_pos once
-	  at entry/exit respectively.
-	- Use C99 initializers for structures.
-	- Remove unused variable blocks from fs/ntfs/aops.c::ntfs_read_block().
-
-2.0.21 - Check for, and refuse to work with too large files/directories/volumes.
-
-	- Limit volume size at mount time to 2TiB on architectures where
-	  unsigned long is 32-bits (fs/ntfs/super.c::parse_ntfs_boot_sector()).
-	  This is the most we can do without overflowing the 32-bit limit of
-	  the block device size imposed on us by sb_bread() and sb_getblk()
-	  for the time being.
-	- Limit file/directory size at open() time to 16TiB on architectures
-	  where unsigned long is 32-bits (fs/ntfs/file.c::ntfs_file_open() and
-	  fs/ntfs/dir.c::ntfs_dir_open()). This is the most we can do without
-	  overflowing the page cache page index.
-
-2.0.20 - Support non-resident directory index bitmaps, fix page leak in readdir.
-
-	- Move the directory index bitmap to use an attribute inode instead of
-	  having special fields for it inside the ntfs inode structure. This
-	  means that the index bitmaps now use the page cache for i/o, too,
-	  and also as a side effect we get support for non-resident index
-	  bitmaps for free.
-	- Simplify/cleanup error handling in fs/ntfs/dir.c::ntfs_readdir() and
-	  fix a page leak that manifested itself in some cases.
-	- Add fs/ntfs/inode.c::ntfs_put_inode(), which we need to release the
-	  index bitmap inode on the final iput().
-
-2.0.19 - Fix race condition, improvements, and optimizations in i/o interface.
-
-	- Apply block optimization added to fs/ntfs/aops.c::ntfs_read_block()
-	  to fs/ntfs/compress.c::ntfs_file_read_compressed_block() as well.
-	- Drop the "file" from ntfs_file_read_compressed_block().
-	- Rename fs/ntfs/aops.c::ntfs_enb_buffer_read_async() to
-	  ntfs_end_buffer_async_read() (more like the fs/buffer.c counterpart).
-	- Update ntfs_end_buffer_async_read() with the improved logic from
-	  its updated counterpart fs/buffer.c::end_buffer_async_read(). Apply
-	  further logic improvements to better determine when we set PageError.
-	- Update submission of buffers in fs/ntfs/aops.c::ntfs_read_block() to
-	  check for the buffers being uptodate first in line with the updated
-	  fs/buffer.c::block_read_full_page(). This plugs a small race
-	  condition.
-
-2.0.18 - Fix race condition in reading of compressed files.
-
-	- There was a narrow window between checking a buffer head for being
-	  uptodate and locking it in ntfs_file_read_compressed_block(). We now
-	  lock the buffer and then check whether it is uptodate or not.
-
-2.0.17 - Cleanups and optimizations - shrinking the ToDo list.
-
-	- Modify fs/ntfs/inode.c::ntfs_read_locked_inode() to return an error
-	  code and update callers, i.e. ntfs_iget(), to pass that error code
-	  up instead of just using -EIO.
-	- Modifications to super.c to ensure that both mount and remount
-	  cannot set any write related options when the driver is compiled
-	  read-only.
-	- Optimize block resolution in fs/ntfs/aops.c::ntfs_read_block() to
-	  cache the current runlist element. This should improve performance
-	  when reading very large and/or very fragmented data.
-
-2.0.16 - Convert access to $MFT/$BITMAP to attribute inode API.
-
-	- Fix a stupid bug introduced in 2.0.15 where we were unmapping the
-	  wrong inode in fs/ntfs/inode.c::ntfs_attr_iget().
-	- Fix debugging check in fs/ntfs/aops.c::ntfs_read_block().
-	- Convert $MFT/$BITMAP access to attribute inode API and remove all
-	  remnants of the ugly mftbmp address space and operations hack. This
-	  means we finally have only one readpage function as well as only one
-	  async io completion handler. Yey! The mft bitmap is now just an
-	  attribute inode and is accessed from vol->mftbmp_ino just as if it
-	  were a normal file. Fake inodes rule. (-:
-
-2.0.15 - Fake inodes based attribute i/o via the pagecache, fixes and cleanups.
-
-	- Fix silly bug in fs/ntfs/super.c::parse_options() which was causing
-	  remounts to fail when the partition had an entry in /etc/fstab and
-	  the entry specified the nls= option.
-	- Apply same macro magic used in fs/ntfs/inode.h to fs/ntfs/volume.h to
-	  expand all the helper functions NVolFoo(), NVolSetFoo(), and
-	  NVolClearFoo().
-	- Move copyright statement from driver initialisation message to
-	  module description (fs/super.c). This makes the initialisation
-	  message fit on one line and fits in better with rest of kernel.
-	- Update fs/ntfs/attrib.c::map_run_list() to work on both real and
-	  attribute inodes, and both for files and directories.
-	- Implement fake attribute inodes allowing all attribute i/o to go via
-	  the page cache and to use all the normal vfs/mm functionality:
-	  - Add ntfs_attr_iget() and its helper ntfs_read_locked_attr_inode()
-	    to fs/ntfs/inode.c.
-	  - Add needed cleanup code to ntfs_clear_big_inode().
-	- Merge address space operations for files and directories (aops.c),
-	  now just have ntfs_aops:
-	  - Rename:
-		end_buffer_read_attr_async() ->	ntfs_end_buffer_read_async(),
-		ntfs_attr_read_block()	     ->	ntfs_read_block(),
-		ntfs_file_read_page()	     ->	ntfs_readpage().
-	  - Rewrite fs/ntfs/aops.c::ntfs_readpage() to work on both real and
-	    attribute inodes, and both for files and directories.
-	  - Remove obsolete fs/ntfs/aops.c::ntfs_mst_readpage().
-
-2.0.14 - Run list merging code cleanup, minor locking changes, typo fixes.
-
-	- Change fs/ntfs/super.c::ntfs_statfs() to not rely on BKL by moving
-	  the locking out of super.c::get_nr_free_mft_records() and taking and
-	  dropping the mftbmp_lock rw_semaphore in ntfs_statfs() itself.
-	- Bring attribute runlist merging code (fs/ntfs/attrib.c) in sync with
-	  current userspace ntfs library code. This means that if a merge
-	  fails the original runlists are always left unmodified instead of
-	  being silently corrupted.
-	- Misc typo fixes.
-
-2.0.13 - Use iget5_locked() in preparation for fake inodes and small cleanups.
-
-	- Remove nr_mft_bits and the now superfluous union with nr_mft_records
-	  from ntfs_volume structure.
-	- Remove nr_lcn_bits and the now superfluous union with nr_clusters
-	  from ntfs_volume structure.
-	- Use iget5_locked() and friends instead of conventional iget(). Wrap
-	  the call in fs/ntfs/inode.c::ntfs_iget() and update callers of iget()
-	  to use ntfs_iget(). Leave only one iget() call at mount time so we
-	  don't need an ntfs_iget_mount().
-	- Change fs/ntfs/inode.c::ntfs_new_extent_inode() to take mft_no as an
-	  additional argument.
-
-2.0.12 - Initial cleanup of address space operations following 2.0.11 changes.
-
-	- Merge fs/ntfs/aops.c::end_buffer_read_mst_async() and
-	  fs/ntfs/aops.c::end_buffer_read_file_async() into one function
-	  fs/ntfs/aops.c::end_buffer_read_attr_async() using NInoMstProtected()
-	  to determine whether to apply mst fixups or not.
-	- Above change allows merging fs/ntfs/aops.c::ntfs_file_read_block()
-	  and fs/ntfs/aops.c::ntfs_mst_readpage() into one function
-	  fs/ntfs/aops.c::ntfs_attr_read_block(). Also, create a tiny wrapper
-	  fs/ntfs/aops.c::ntfs_mst_readpage() to transform the parameters from
-	  the VFS readpage function prototype to the ntfs_attr_read_block()
-	  function prototype.
-
-2.0.11 - Initial preparations for fake inode based attribute i/o.
-
-	- Move definition of ntfs_inode_state_bits to fs/ntfs/inode.h and
-	  do some macro magic (adapted from include/linux/buffer_head.h) to
-	  expand all the helper functions NInoFoo(), NInoSetFoo(), and
-	  NInoClearFoo().
-	- Add new flag to ntfs_inode_state_bits: NI_Sparse.
-	- Add new fields to ntfs_inode structure to allow use of fake inodes
-	  for attribute i/o: type, name, name_len. Also add new state bits:
-	  NI_Attr, which, if set, indicates the inode is a fake inode, and
-	  NI_MstProtected, which, if set, indicates the attribute uses multi
-	  sector transfer protection, i.e. fixups need to be applied after
-	  reads and before/after writes.
-	- Rename fs/ntfs/inode.c::ntfs_{new,clear,destroy}_inode() to
-	  ntfs_{new,clear,destroy}_extent_inode() and update callers.
-	- Use ntfs_clear_extent_inode() in fs/ntfs/inode.c::__ntfs_clear_inode()
-	  instead of ntfs_destroy_extent_inode().
-	- Cleanup memory deallocations in {__,}ntfs_clear_{,big_}inode().
-	- Make all operations on ntfs inode state bits use the NIno* functions.
-	- Set up the new ntfs inode fields and state bits in
-	  fs/ntfs/inode.c::ntfs_read_inode() and add appropriate cleanup of
-	  allocated memory to __ntfs_clear_inode().
-	- Cleanup ntfs_inode structure a bit for better ordering of elements
-	  w.r.t. their size to allow better packing of the structure in memory.
-
-2.0.10 - There can only be 2^32 - 1 inodes on an NTFS volume.
-
-	- Add check at mount time to verify that the number of inodes on the
-	  volume does not exceed 2^32 - 1, which is the maximum allowed for
-	  NTFS according to Microsoft.
-	- Change mft_no member of ntfs_inode structure to be unsigned long.
-	  Update all users. This makes ntfs_inode->mft_no just a copy of struct
-	  inode->i_ino. But we can't just always use struct inode->i_ino and
-	  remove mft_no because extent inodes do not have an attached struct
-	  inode.
-
-2.0.9 - Decompression engine now uses a single buffer and other cleanups.
-
-	- Change decompression engine to use a single buffer protected by a
-	  spin lock instead of per-CPU buffers. (Rusty Russell)
-	- Do not update cb_pos when handling a partial final page during
-	  decompression of a sparse compression block, as the value is later
-	  reset without being read/used. (Rusty Russell)
-	- Switch to using the new KM_BIO_SRC_IRQ for atomic kmap()s. (Andrew
-	  Morton)
-	- Change buffer size in ntfs_readdir()/ntfs_filldir() to use
-	  NLS_MAX_CHARSET_SIZE which makes the buffers almost 1kiB each but
-	  it also makes everything safer so it is a good thing.
-	- Miscellaneous minor cleanups to comments.
-
-2.0.8 - Major updates for handling of case sensitivity and dcache aliasing.
-
-	Big thanks go to Al Viro and other inhabitants of #kernel for investing
-	their time to discuss the case sensitivity and dcache aliasing issues.
-
-	- Remove unused source file fs/ntfs/attraops.c.
-	- Remove show_inodes mount option(s), thus dropping support for
-	  displaying of short file names.
-	- Remove deprecated mount option posix.
-	- Restore show_sys_files mount option.
-	- Add new mount option case_sensitive, to determine if the driver
-	  treats file names as case sensitive or not. If case sensitive, create
-	  file names in the POSIX namespace. Otherwise create file names in the
-	  LONG/WIN32 namespace. Note, files remain accessible via their short
-	  file name, if it exists.
-	- Remove really dumb logic bug in boot sector recovery code.
-	- Fix dcache aliasing issues wrt short/long file names via changes
-	  to fs/ntfs/dir.c::ntfs_lookup_inode_by_name() and
-	  fs/ntfs/namei.c::ntfs_lookup():
-	  - Add additional argument to ntfs_lookup_inode_by_name() in which we
-	    return information about the matching file name if the case is not
-	    matching or the match is a short file name. See comments above the
-	    function definition for details.
-	  - Change ntfs_lookup() to only create dcache entries for the correctly
-	    cased file name and only for the WIN32 namespace counterpart of DOS
-	    namespace file names. This ensures we have only one dentry per
-	    directory and also removes all dcache aliasing issues between short
-	    and long file names once we add write support. See comments above
-	    function for details.
-	- Fix potential 1 byte overflow in fs/ntfs/unistr.c::ntfs_ucstonls().
-
-2.0.7 - Minor cleanups and updates for changes in core kernel code.
-
-	- Remove much of the NULL struct element initializers.
-	- Various updates to make compatible with recent kernels.
-	- Remove defines of MAX_BUF_PER_PAGE and include linux/buffer_head.h
-	  in fs/ntfs/ntfs.h instead.
-	- Remove no longer needed KERNEL_VERSION checks. We are now in the
-	  kernel proper so they are no longer needed.
-
-2.0.6 - Major bugfix to make compatible with other kernel changes.
-
-	- Initialize the mftbmp address space properly now that there are more
-	  fields in the struct address_space. This was leading to hangs and
-	  oopses on umount since 2.5.12 because of changes to other parts of
-	  the kernel. We probably want a kernel generic init_address_space()
-	  function...
-	- Drop BKL from ntfs_readdir() after consultation with Al Viro. The
-	  only caller of ->readdir() is vfs_readdir() which holds i_mutex
-	  during the call, and i_mutex is sufficient protection against changes
-	  in the directory inode (including ->i_size).
-	- Use generic_file_llseek() for directories (as opposed to
-	  default_llseek()) as this downs i_mutex instead of the BKL which is
-	  what we now need for exclusion against ->f_pos changes considering we
-	  no longer take the BKL in ntfs_readdir().
-
-2.0.5 - Major bugfix. Buffer overflow in extent inode handling.
-
-	- No need to set old blocksize in super.c::ntfs_fill_super() as the
-	  VFS does so via invocation of deactivate_super() calling
-	  fs->fill_super() calling block_kill_super() which does it.
-	- BKL moved from VFS into dir.c::ntfs_readdir(). (Linus Torvalds)
-	  -> Do we really need it? I don't think so as we have exclusion on
-	  the directory ntfs_inode rw_semaphore mrec_lock. We mmight have to
-	  move the ->f_pos accesses under the mrec_lock though. Check this...
-	- Fix really, really, really stupid buffer overflow in extent inode
-	  handling in mft.c::map_extent_mft_record().
-
-2.0.4 - Cleanups and updates for kernel 2.5.11.
-
-	- Add documentation on how to use the MD driver to be able to use NTFS
-	  stripe and volume sets in Linux and generally cleanup documentation
-	  a bit.
-	Remove all uses of kdev_t in favour of struct block_device *:
-	- Change compress.c::ntfs_file_read_compressed_block() to use
-	  sb_getblk() instead of getblk().
-	- Change super.c::ntfs_fill_super() to use bdev_hardsect_size() instead
-	  of get_hardsect_size().
-	- No need to get old blocksize in super.c::ntfs_fill_super() as
-	  fs/super.c::get_sb_bdev() already does this.
-	- Set bh->b_bdev instead of bh->b_dev throughout aops.c.
-
-2.0.3 - Small bug fixes, cleanups, and performance improvements.
-
-	- Remove some dead code from mft.c.
-	- Optimize readpage and read_block functions throughout aops.c so that
-	  only initialized blocks are read. Non-initialized ones have their
-	  buffer head mapped, zeroed, and set up to date, without scheduling
-	  any i/o. Thanks to Al Viro for advice on how to avoid the device i/o.
-	Thanks go to Andrew Morton for spotting the below:
-	- Fix buglet in allocate_compression_buffers() error code path.
-	- Call flush_dcache_page() after modifying page cache page contents in
-	  ntfs_file_readpage().
-	- Check for existence of page buffers throughout aops.c before calling
-	  create_empty_buffers(). This happens when an I/O error occurs and the
-	  read is retried. (It also happens once writing is implemented so that
-	  needed doing anyway but I had left it for later...)
-	- Don't BUG_ON() uptodate and/or mapped buffers throughout aops.c in
-	  readpage and read_block functions. Reasoning same as above (i.e. I/O
-	  error retries and future write code paths.)
-
-2.0.2 - Minor updates and cleanups.
-
-	- Cleanup: rename mst.c::__post_read_mst_fixup to post_write_mst_fixup
-	  and cleanup the code a bit, removing the unused size parameter.
-	- Change default fmask to 0177 and update documentation.
-	- Change attrib.c::get_attr_search_ctx() to return the search context
-	  directly instead of taking the address of a pointer. A return value
-	  of NULL means the allocation failed. Updated all callers
-	  appropriately.
-	- Update to 2.5.9 kernel (preserving backwards compatibility) by
-	  replacing all occurences of page->buffers with page_buffers(page).
-	- Fix minor bugs in runlist merging, also minor cleanup.
-	- Updates to bootsector layout and mft mirror contents descriptions.
-	- Small bug fix in error detection in unistr.c and some cleanups.
-	- Grow name buffer allocations in unistr.c in aligned mutlipled of 64
-	  bytes.
-
-2.0.1 - Minor updates.
-
-	- Make default umask correspond to documentation.
-	- Improve documentation.
-	- Set default mode to include execute bit. The {u,f,d}mask can be used
-	  to take it away if desired. This allows binaries to be executed from
-	  a mounted ntfs partition.
-
-2.0.0 - New version number. Remove TNG from the name. Now in the kernel.
-
-	- Add kill_super, just keeping up with the vfs changes in the kernel.
-	- Repeat some changes from tng-0.0.8 that somehow got lost on the way
-	  from the CVS import into BitKeeper.
-	- Begin to implement proper handling of allocated_size vs
-	  initialized_size vs data_size (i.e. i_size). Done are
-	  mft.c::ntfs_mft_readpage(), aops.c::end_buffer_read_index_async(),
-	  and attrib.c::load_attribute_list().
-	- Lock the runlist in attrib.c::load_attribute_list() while using it.
-	- Fix memory leak in ntfs_file_read_compressed_block() and generally
-	  clean up compress.c a little, removing some uncommented/unused debug
-	  code.
-	- Tidy up dir.c a little bit.
-	- Don't bother getting the runlist in inode.c::ntfs_read_inode().
-	- Merge mft.c::ntfs_mft_readpage() and aops.c::ntfs_index_readpage()
-	  creating aops.c::ntfs_mst_readpage(), improving the handling of
-	  holes and overflow in the process and implementing the correct
-	  equivalent of ntfs_file_get_block() in ntfs_mst_readpage() itself.
-	  I am aiming for correctness at the moment. Modularisation can come
-	  later.
-	- Rename aops.c::end_buffer_read_index_async() to
-	  end_buffer_read_mst_async() and optimize the overflow checking and
-	  handling.
-	- Use the host of the mftbmp address space mapping to hold the ntfs
-	  volume. This is needed so the async i/o completion handler can
-	  retrieve a pointer to the volume. Hopefully this will not cause
-	  problems elsewhere in the kernel... Otherwise will need to use a
-	  fake inode.
-	- Complete implementation of proper handling of allocated_size vs
-	  initialized_size vs data_size (i.e. i_size) in whole driver.
-	  Basically aops.c is now completely rewritten.
-	- Change NTFS driver name to just NTFS and set version number to 2.0.0
-	  to make a clear distinction from the old driver which is still on
-	  version 1.1.22.
-
-tng-0.0.8 - 08/03/2002 - Now using BitKeeper, http://linux-ntfs.bkbits.net/
-
-	- Replace bdevname(sb->s_dev) with sb->s_id.
-	- Remove now superfluous new-line characters in all callers of
-	  ntfs_debug().
-	- Apply kludge in ntfs_read_inode(), setting i_nlink to 1 for
-	  directories. Without this the "find" utility gets very upset which is
-	  fair enough as Linux/Unix do not support directory hard links.
-	- Further runlist merging work. (Richard Russon)
-	- Backwards compatibility for gcc-2.95. (Richard Russon)
-	- Update to kernel 2.5.5-pre1 and rediff the now tiny patch.
-	- Convert to new filesystem declaration using ->ntfs_get_sb() and
-	  replacing ntfs_read_super() with ntfs_fill_super().
-	- Set s_maxbytes to MAX_LFS_FILESIZE to avoid page cache page index
-	  overflow on 32-bit architectures.
-	- Cleanup upcase loading code to use ntfs_(un)map_page().
-	- Disable/reenable preemtion in critical sections of compession engine.
-	- Replace device size determination in ntfs_fill_super() with
-	  sb->s_bdev->bd_inode->i_size (in bytes) and remove now superfluous
-	  function super.c::get_nr_blocks().
-	- Implement a mount time option (show_inodes) allowing choice of which
-	  types of inode names readdir() returns and modify ntfs_filldir()
-	  accordingly. There are several parameters to show_inodes:
-		system:	system files
-		win32:	long file names (including POSIX file names) [DEFAULT]
-		long:	same as win32
-		dos:	short file names only (excluding POSIX file names)
-		short:	same as dos
-		posix:	same as both win32 and dos
-		all:	all file names
-	  Note that the options are additive, i.e. specifying:
-		-o show_inodes=system,show_inodes=win32,show_inodes=dos
-	  is the same as specifying:
-		-o show_inodes=all
-	  Note that the "posix" and "all" options will show all directory
-	  names, BUT the link count on each directory inode entry is set to 1,
-	  due to Linux not supporting directory hard links. This may well
-	  confuse some userspace applications, since the directory names will
-	  have the same inode numbers. Thus it is NOT advisable to use the
-	  "posix" or "all" options. We provide them only for completeness sake.
-	- Add copies of allocated_size, initialized_size, and compressed_size to
-	  the ntfs inode structure and set them up in
-	  inode.c::ntfs_read_inode(). These reflect the unnamed data attribute
-	  for files and the index allocation attribute for directories.
-	- Add copies of allocated_size and initialized_size to ntfs inode for
-	  $BITMAP attribute of large directories and set them up in
-	  inode.c::ntfs_read_inode().
-	- Add copies of allocated_size and initialized_size to ntfs volume for
-	  $BITMAP attribute of $MFT and set them up in
-	  super.c::load_system_files().
-	- Parse deprecated ntfs driver options (iocharset, show_sys_files,
-	  posix, and utf8) and tell user what the new options to use are. Note
-	  we still do support them but they will be removed with kernel 2.7.x.
-	- Change all occurences of integer long long printf formatting to hex
-	  as printk() will not support long long integer format if/when the
-	  div64 patch goes into the kernel.
-	- Make slab caches have stable names and change the names to what they
-	  were intended to be. These changes are required/made possible by the
-	  new slab cache name handling which removes the length limitation by
-	  requiring the caller of kmem_cache_create() to supply a stable name
-	  which is then referenced but not copied.
-	- Rename run_list structure to run_list_element and create a new
-	  run_list structure containing a pointer to a run_list_element
-	  structure and a read/write semaphore. Adapt all users of runlists
-	  to new scheme and take and release the lock as needed. This fixes a
-	  nasty race as the run_list changes even when inodes are locked for
-	  reading and even when the inode isn't locked at all, so we really
-	  needed the serialization. We use a semaphore rather than a spinlock
-	  as memory allocations can sleep and doing everything GFP_ATOMIC
-	  would be silly.
-	- Cleanup read_inode() removing all code checking for lowest_vcn != 0.
-	  This can never happen due to the nature of lookup_attr() and how we
-	  support attribute lists. If it did happen it would imply the inode
-	  being corrupt.
-	- Check for lowest_vcn != 0 in ntfs_read_inode() and mark the inode as
-	  bad if found.
-	- Update to 2.5.6-pre2 changes in struct address_space.
-	- Use parent_ino() when accessing d_parent inode number in dir.c.
-	- Import Sourceforge CVS repository into BitKeeper repository:
-		http://linux-ntfs.bkbits.net/ntfs-tng-2.5
-	- Update fs/Makefile, fs/Config.help, fs/Config.in, and
-	  Documentation/filesystems/ntfs.txt for NTFS TNG.
-	- Create kernel configuration option controlling whether debugging
-	  is enabled or not.
-	- Add the required export of end_buffer_io_sync() from the patches
-	  directory to the kernel code.
-	- Update inode.c::ntfs_show_options() with show_inodes mount option.
-	- Update errors mount option.
-
-tng-0.0.7 - 13/02/2002 - The driver is now feature complete for read-only!
-
-	- Cleanup mft.c and it's debug/error output in particular. Fix a minor
-	  bug in mapping of extent inodes. Update all the comments to fit all
-	  the recent code changes.
-	- Modify vcn_to_lcn() to cope with entirely unmapped runlists.
-	- Cleanups in compress.c, mostly comments and folding help.
-	- Implement attrib.c::map_run_list() as a generic helper.
-	- Make compress.c::ntfs_file_read_compressed_block() use map_run_list()
-	  thus making code shorter and enabling attribute list support.
-	- Cleanup incorrect use of [su]64 with %L printf format specifier in
-	  all source files. Type casts to [unsigned] long long added to correct
-	  the mismatches (important for architectures which have long long not
-	  being 64 bits).
-	- Merge async io completion handlers for directory indexes and $MFT
-	  data into one by setting the index_block_size{_bits} of the ntfs
-	  inode for $MFT to the mft_record_size{_bits} of the ntfs_volume.
-	- Cleanup aops.c, update comments.
-	- Make ntfs_file_get_block() use map_run_list() so all files now
-	  support attribute lists.
-	- Make ntfs_dir_readpage() almost verbatim copy of
-	  block_read_full_page() by using ntfs_file_get_block() with only real
-	  difference being the use of our own async io completion handler
-	  rather than the default one, thus reducing the amount of code and
-	  automatically enabling attribute list support for directory indices.
-	- Fix bug in load_attribute_list() - forgot to call brelse in error
-	  code path.
-	- Change parameters to find_attr() and lookup_attr(). We no longer
-	  pass in the upcase table and its length. These can be gotten from
-	  ctx->ntfs_ino->vol->upcase{_len}. Update all callers.
-	- Cleanups in attrib.c.
-	- Implement merging of runlists, attrib.c::merge_run_lists() and its
-	  helpers. (Richard Russon)
-	- Attribute lists part 2, attribute extents and multi part runlists:
-	  enable proper support for LCN_RL_NOT_MAPPED and automatic mapping of
-	  further runlist parts via attrib.c::map_run_list().
-	- Tiny endianness bug fix in decompress_mapping_pairs().
-
-tng-0.0.6 - Encrypted directories, bug fixes, cleanups, debugging enhancements.
-
-	- Enable encrypted directories. (Their index root is marked encrypted
-	  to indicate that new files in that directory should be created
-	  encrypted.)
-	- Fix bug in NInoBmpNonResident() macro. (Cut and paste error.)
-	- Enable $Extend system directory. Most (if not all) extended system
-	  files do not have unnamed data attributes so ntfs_read_inode() had to
-	  special case them but that is ok, as the special casing recovery
-	  happens inside an error code path so there is zero slow down in the
-	  normal fast path. The special casing is done by introducing a new
-	  function inode.c::ntfs_is_extended_system_file() which checks if any
-	  of the hard links in the inode point to $Extend as being their parent
-	  directory and if they do we assume this is an extended system file.
-	- Create a sysctl/proc interface to allow {dis,en}abling of debug output
-	  when compiled with -DDEBUG. Default is debug messages to be disabled.
-	  To enable them, one writes a non-zero value to /proc/sys/fs/ntfs-debug
-	  (if /proc is enabled) or uses sysctl(2) to effect the same (if sysctl
-	  interface is enabled). Inspired by old ntfs driver.
-	- Add debug_msgs insmod/kernel boot parameter to set whether debug
-	  messages are {dis,en}abled. This is useful to enable debug messages
-	  during ntfs initialization and is the only way to activate debugging
-	  when the sysctl interface is not enabled.
-	- Cleanup debug output in various places.
-	- Remove all dollar signs ($) from the source (except comments) to
-	  enable compilation on architectures whose gcc compiler does not
-	  support dollar signs in the names of variables/constants. Attribute
-	  types now start with AT_ instead of $ and $I30 is now just I30.
-	- Cleanup ntfs_lookup() and add consistency check of sequence numbers.
-	- Load complete runlist for $MFT/$BITMAP during mount and cleanup
-	  access functions. This means we now cope with $MFT/$BITMAP being
-	  spread accross several mft records.
-	- Disable modification of mft_zone_multiplier on remount. We can always
-	  reenable this later on if we really want to, but we will need to make
-	  sure we readjust the mft_zone size / layout accordingly.
-
-tng-0.0.5 - Modernize for 2.5.x and further in line-ing with Al Viro's comments.
-
-	- Use sb_set_blocksize() instead of set_blocksize() and verify the
-	  return value.
-	- Use sb_bread() instead of bread() throughout.
-	- Add index_vcn_size{_bits} to ntfs_inode structure to store the size
-	  of a directory index block vcn. Apply resulting simplifications in
-	  dir.c everywhere.
-	- Fix a small bug somewhere (but forgot what it was).
-	- Change ntfs_{debug,error,warning} to enable gcc to do type checking
-	  on the printf-format parameter list and fix bugs reported by gcc
-	  as a result. (Richard Russon)
-	- Move inode allocation strategy to Al's new stuff but maintain the
-	  divorce of ntfs_inode from struct inode. To achieve this we have two
-	  separate slab caches, one for big ntfs inodes containing a struct
-	  inode and pure ntfs inodes and at the same time fix some faulty
-	  error code paths in ntfs_read_inode().
-	- Show mount options in proc (inode.c::ntfs_show_options()).
-
-tng-0.0.4 - Big changes, getting in line with Al Viro's comments.
-
-	- Modified (un)map_mft_record functions to be common for read and write
-	  case. To specify which is which, added extra parameter at front of
-	  parameter list. Pass either READ or WRITE to this, each has the
-	  obvious meaning.
-	- General cleanups to allow for easier folding in vi.
-	- attrib.c::decompress_mapping_pairs() now accepts the old runlist
-	  argument, and invokes attrib.c::merge_run_lists() to merge the old
-	  and the new runlists.
-	- Removed attrib.c::find_first_attr().
-	- Implemented loading of attribute list and complete runlist for $MFT.
-	  This means we now cope with $MFT being spread across several mft
-	  records.
-	- Adapt to 2.5.2-pre9 and the changed create_empty_buffers() syntax.
-	- Adapt major/minor/kdev_t/[bk]devname stuff to new 2.5.x kernels.
-	- Make ntfs_volume be allocated via kmalloc() instead of using a slab
-	  cache. There are too little ntfs_volume structures at any one time
-	  to justify a private slab cache.
-	- Fix bogus kmap() use in async io completion. Now use kmap_atomic().
-	  Use KM_BIO_IRQ on advice from IRC/kernel...
-	- Use ntfs_map_page() in map_mft_record() and create ->readpage method
-	  for reading $MFT (ntfs_mft_readpage). In the process create dedicated
-	  address space operations (ntfs_mft_aops) for $MFT inode mapping. Also
-	  removed the now superfluous exports from the kernel core patch.
-	- Fix a bug where kfree() was used instead of ntfs_free().
-	- Change map_mft_record() to take ntfs_inode as argument instead of
-	  vfs inode. Dito for unmap_mft_record(). Adapt all callers.
-	- Add pointer to ntfs_volume to ntfs_inode.
-	- Add mft record number and sequence number to ntfs_inode. Stop using
-	  i_ino and i_generation for in-driver purposes.
-	- Implement attrib.c::merge_run_lists(). (Richard Russon)
-	- Remove use of proper inodes by extent inodes. Move i_ino and
-	  i_generation to ntfs_inode to do this. Apply simplifications that
-	  result and remove iget_no_wait(), etc.
-	- Pass ntfs_inode everywhere in the driver (used to be struct inode).
-	- Add reference counting in ntfs_inode for the ntfs inode itself and
-	  for the mapped mft record.
-	- Extend mft record mapping so we can (un)map extent mft records (new
-	  functions (un)map_extent_mft_record), and so mappings are reference
-	  counted and don't have to happen twice if already mapped - just ref
-	  count increases.
-	- Add -o iocharset as alias to -o nls for backwards compatibility.
-	- The latest core patch is now tiny. In fact just a single additional
-	  export is necessary over the base kernel.
-
-tng-0.0.3 - Cleanups, enhancements, bug fixes.
-
-	- Work on attrib.c::decompress_mapping_pairs() to detect base extents
-	  and setup the runlist appropriately using knowledge provided by the
-	  sizes in the base attribute record.
-	- Balance the get_/put_attr_search_ctx() calls so we don't leak memory
-	  any more.
-	- Introduce ntfs_malloc_nofs() and ntfs_free() to allocate/free a single
-	  page or use vmalloc depending on the amount of memory requested.
-	- Cleanup error output. The __FUNCTION__ "(): " is now added
-	  automatically. Introduced a new header file debug.h to support this
-	  and also moved ntfs_debug() function into it.
-	- Make reading of compressed files more intelligent and especially get
-	  rid of the vmalloc_nofs() from readpage(). This now uses per CPU
-	  buffers (allocated at first mount with cluster size <= 4kiB and
-	  deallocated on last umount with cluster size <= 4kiB), and
-	  asynchronous io for the compressed data using a list of buffer heads.
-	  Er, we use synchronous io as async io only works on whole pages
-	  covered by buffers and not on individual buffer heads...
-	- Bug fix for reading compressed files with sparse compression blocks.
-
-tng-0.0.2 - Now handles larger/fragmented/compressed volumes/files/dirs.
-
-	- Fixed handling of directories when cluster size exceeds index block
-	  size.
-	- Hide DOS only name space directory entries from readdir() but allow
-	  them in lookup(). This should fix the problem that Linux doesn't
-	  support directory hard links, while still allowing access to entries
-	  via their short file name. This also has the benefit of mimicking
-	  what Windows users are used to, so it is the ideal solution.
-	- Implemented sync_page everywhere so no more hangs in D state when
-	  waiting for a page.
-	- Stop using bforget() in favour of brelse().
-	- Stop locking buffers unnecessarily.
-	- Implemented compressed files (inode->mapping contains uncompressed
-	  data, raw compressed data is currently bread() into a vmalloc()ed
-	  memory buffer).
-	- Enable compressed directories. (Their index root is marked compressed
-	  to indicate that new files in that directory should be created
-	  compressed.)
-	- Use vsnprintf rather than vsprintf in the ntfs_error and ntfs_warning
-	  functions. (Thanks to Will Dyson for pointing this out.)
-	- Moved the ntfs_inode and ntfs_volume (the former ntfs_inode_info and
-	  ntfs_sb_info) out of the common inode and super_block structures and
-	  started using the generic_ip and generic_sbp pointers instead. This
-	  makes ntfs entirely private with respect to the kernel tree.
-	- Detect compiler version and abort with error message if gcc less than
-	  2.96 is used.
-	- Fix bug in name comparison function in unistr.c.
-	- Implement attribute lists part 1, the infrastructure: search contexts
-	  and operations, find_external_attr(), lookup_attr()) and make the
-	  code use the infrastructure.
-	- Fix stupid buffer overflow bug that became apparent on larger run
-	  list containing attributes.
-	- Fix bugs in readdir() that became apparent on larger directories.
-
-	The driver is now really useful and survives the test
-		find . -type f -exec md5sum "{}" \;
-	without any error messages on a over 1GiB sized partition with >16k
-	files on it, including compressed files and directories and many files
-	and directories with attribute lists.
-
-tng-0.0.1 - The first useful version.
-
-	- Added ntfs_lookup().
-	- Added default upcase generation and handling.
-	- Added compile options to be shown on module init.
-	- Many bug fixes that were "hidden" before.
-	- Update to latest kernel.
-	- Added ntfs_readdir().
-	- Added file operations for mmap(), read(), open() and llseek(). We just
-	  use the generic ones. The whole point of going through implementing
-	  readpage() methods and where possible get_block() call backs is that
-	  this allows us to make use of the generic high level methods provided
-	  by the kernel.
-
-	The driver is now actually useful! Yey. (-: It undoubtedly has got bugs
-	though and it doesn't implement accesssing compressed files yet. Also,
-	accessing files with attribute list attributes is not implemented yet
-	either. But for small or simple filesystems it should work and allow
-	you to list directories, use stat on directory entries and the file
-	system, open, read, mmap and llseek around in files. A big mile stone
-	has been reached!
-
-tng-0.0.0 - Initial version tag.
-
-	Initial driver implementation. The driver can mount and umount simple
-	NTFS filesystems (i.e. ones without attribute lists in the system
-	files). If the mount fails there might be problems in the error handling
-	code paths, so be warned. Otherwise it seems to be loading the system
-	files nicely and the mft record read mapping/unmapping seems to be
-	working nicely, too. Proof of inode metadata in the page cache and non-
-	resident file unnamed stream data in the page cache concepts is thus
-	complete.
diff --git a/fs/ocfs2/cluster/masklog.c b/fs/ocfs2/cluster/masklog.c
index b39da87..3bb928a 100644
--- a/fs/ocfs2/cluster/masklog.c
+++ b/fs/ocfs2/cluster/masklog.c
@@ -136,7 +136,7 @@
 	return mlog_mask_store(mlog_attr->mask, buf, count);
 }
 
-static struct sysfs_ops mlog_attr_ops = {
+static const struct sysfs_ops mlog_attr_ops = {
 	.show  = mlog_show,
 	.store = mlog_store,
 };
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index d8d0c65..73e743e 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -72,9 +72,9 @@
 
 #include "tcp_internal.h"
 
-#define SC_NODEF_FMT "node %s (num %u) at %u.%u.%u.%u:%u"
+#define SC_NODEF_FMT "node %s (num %u) at %pI4:%u"
 #define SC_NODEF_ARGS(sc) sc->sc_node->nd_name, sc->sc_node->nd_num,	\
-			  NIPQUAD(sc->sc_node->nd_ipv4_address),	\
+			  &sc->sc_node->nd_ipv4_address,		\
 			  ntohs(sc->sc_node->nd_ipv4_port)
 
 /*
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 8298608..50c4ee8 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -1881,7 +1881,7 @@
  * ocfs2_file_lock() and ocfs2_file_unlock() map to a single pair of
  * flock() calls. The locking approach this requires is sufficiently
  * different from all other cluster lock types that we implement a
- * seperate path to the "low-level" dlm calls. In particular:
+ * separate path to the "low-level" dlm calls. In particular:
  *
  * - No optimization of lock levels is done - we take at exactly
  *   what's been requested.
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index 5328529..c562a75 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -453,7 +453,7 @@
 	if (i == -1) {
 		/*
 		 * Holes can be larger than the maximum size of an
-		 * extent, so we return their lengths in a seperate
+		 * extent, so we return their lengths in a separate
 		 * field.
 		 */
 		if (hole_len) {
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index ebf3440d..277575d 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -201,7 +201,8 @@
 				rootdir = (struct qnx4_inode_entry *) (bh->b_data + i * QNX4_DIR_ENTRY_SIZE);
 				if (rootdir->di_fname != NULL) {
 					QNX4DEBUG((KERN_INFO "rootdir entry found : [%s]\n", rootdir->di_fname));
-					if (!strncmp(rootdir->di_fname, QNX4_BMNAME, sizeof QNX4_BMNAME)) {
+					if (!strcmp(rootdir->di_fname,
+						    QNX4_BMNAME)) {
 						found = 1;
 						qnx4_sb(sb)->BitMap = kmalloc( sizeof( struct qnx4_inode_entry ), GFP_KERNEL );
 						if (!qnx4_sb(sb)->BitMap) {
diff --git a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c
index dc014f7..483442e 100644
--- a/fs/reiserfs/bitmap.c
+++ b/fs/reiserfs/bitmap.c
@@ -169,7 +169,7 @@
 			return 0;	// No free blocks in this bitmap
 		}
 
-		/* search for a first zero bit -- beggining of a window */
+		/* search for a first zero bit -- beginning of a window */
 		*beg = reiserfs_find_next_zero_le_bit
 		    ((unsigned long *)(bh->b_data), boundary, *beg);
 
diff --git a/fs/select.c b/fs/select.c
index 73715e9..500a669 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -691,6 +691,23 @@
 }
 #endif /* HAVE_SET_RESTORE_SIGMASK */
 
+#ifdef __ARCH_WANT_SYS_OLD_SELECT
+struct sel_arg_struct {
+	unsigned long n;
+	fd_set __user *inp, *outp, *exp;
+	struct timeval __user *tvp;
+};
+
+SYSCALL_DEFINE1(old_select, struct sel_arg_struct __user *, arg)
+{
+	struct sel_arg_struct a;
+
+	if (copy_from_user(&a, arg, sizeof(a)))
+		return -EFAULT;
+	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
+}
+#endif
+
 struct poll_list {
 	struct poll_list *next;
 	int len;
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index a0a500a..e9d2935 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -54,14 +54,14 @@
 	int rc;
 
 	/* need attr_sd for attr, its parent for kobj */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -ENODEV;
 
 	rc = -EIO;
 	if (attr->read)
 		rc = attr->read(kobj, attr, buffer, off, count);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 
 	return rc;
 }
@@ -125,14 +125,14 @@
 	int rc;
 
 	/* need attr_sd for attr, its parent for kobj */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -ENODEV;
 
 	rc = -EIO;
 	if (attr->write)
 		rc = attr->write(kobj, attr, buffer, offset, count);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 
 	return rc;
 }
@@ -184,12 +184,12 @@
 	if (!bb->vm_ops || !bb->vm_ops->open)
 		return;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return;
 
 	bb->vm_ops->open(vma);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 }
 
 static void bin_vma_close(struct vm_area_struct *vma)
@@ -201,12 +201,12 @@
 	if (!bb->vm_ops || !bb->vm_ops->close)
 		return;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return;
 
 	bb->vm_ops->close(vma);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 }
 
 static int bin_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
@@ -219,12 +219,12 @@
 	if (!bb->vm_ops || !bb->vm_ops->fault)
 		return VM_FAULT_SIGBUS;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return VM_FAULT_SIGBUS;
 
 	ret = bb->vm_ops->fault(vma, vmf);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return ret;
 }
 
@@ -241,12 +241,12 @@
 	if (!bb->vm_ops->page_mkwrite)
 		return 0;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return VM_FAULT_SIGBUS;
 
 	ret = bb->vm_ops->page_mkwrite(vma, vmf);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return ret;
 }
 
@@ -261,12 +261,12 @@
 	if (!bb->vm_ops || !bb->vm_ops->access)
 		return -EINVAL;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -EINVAL;
 
 	ret = bb->vm_ops->access(vma, addr, buf, len, write);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return ret;
 }
 
@@ -281,12 +281,12 @@
 	if (!bb->vm_ops || !bb->vm_ops->set_policy)
 		return 0;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -EINVAL;
 
 	ret = bb->vm_ops->set_policy(vma, new);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return ret;
 }
 
@@ -301,12 +301,12 @@
 	if (!bb->vm_ops || !bb->vm_ops->get_policy)
 		return vma->vm_policy;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return vma->vm_policy;
 
 	pol = bb->vm_ops->get_policy(vma, addr);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return pol;
 }
 
@@ -321,12 +321,12 @@
 	if (!bb->vm_ops || !bb->vm_ops->migrate)
 		return 0;
 
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return 0;
 
 	ret = bb->vm_ops->migrate(vma, from, to, flags);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return ret;
 }
 #endif
@@ -356,7 +356,7 @@
 
 	/* need attr_sd for attr, its parent for kobj */
 	rc = -ENODEV;
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		goto out_unlock;
 
 	rc = -EINVAL;
@@ -384,7 +384,7 @@
 	bb->vm_ops = vma->vm_ops;
 	vma->vm_ops = &bin_vm_ops;
 out_put:
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 out_unlock:
 	mutex_unlock(&bb->mutex);
 
@@ -399,7 +399,7 @@
 	int error;
 
 	/* binary file operations requires both @sd and its parent */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -ENODEV;
 
 	error = -EACCES;
@@ -426,11 +426,11 @@
 	mutex_unlock(&sysfs_bin_lock);
 
 	/* open succeeded, put active references */
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return 0;
 
  err_out:
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	kfree(bb);
 	return error;
 }
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 699f371..5907178 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -93,7 +93,7 @@
  *	RETURNS:
  *	Pointer to @sd on success, NULL on failure.
  */
-static struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd)
+struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd)
 {
 	if (unlikely(!sd))
 		return NULL;
@@ -124,7 +124,7 @@
  *	Put an active reference to @sd.  This function is noop if @sd
  *	is NULL.
  */
-static void sysfs_put_active(struct sysfs_dirent *sd)
+void sysfs_put_active(struct sysfs_dirent *sd)
 {
 	struct completion *cmpl;
 	int v;
@@ -145,45 +145,6 @@
 }
 
 /**
- *	sysfs_get_active_two - get active references to sysfs_dirent and parent
- *	@sd: sysfs_dirent of interest
- *
- *	Get active reference to @sd and its parent.  Parent's active
- *	reference is grabbed first.  This function is noop if @sd is
- *	NULL.
- *
- *	RETURNS:
- *	Pointer to @sd on success, NULL on failure.
- */
-struct sysfs_dirent *sysfs_get_active_two(struct sysfs_dirent *sd)
-{
-	if (sd) {
-		if (sd->s_parent && unlikely(!sysfs_get_active(sd->s_parent)))
-			return NULL;
-		if (unlikely(!sysfs_get_active(sd))) {
-			sysfs_put_active(sd->s_parent);
-			return NULL;
-		}
-	}
-	return sd;
-}
-
-/**
- *	sysfs_put_active_two - put active references to sysfs_dirent and parent
- *	@sd: sysfs_dirent of interest
- *
- *	Put active references to @sd and its parent.  This function is
- *	noop if @sd is NULL.
- */
-void sysfs_put_active_two(struct sysfs_dirent *sd)
-{
-	if (sd) {
-		sysfs_put_active(sd);
-		sysfs_put_active(sd->s_parent);
-	}
-}
-
-/**
  *	sysfs_deactivate - deactivate sysfs_dirent
  *	@sd: sysfs_dirent to deactivate
  *
@@ -195,6 +156,10 @@
 	int v;
 
 	BUG_ON(sd->s_sibling || !(sd->s_flags & SYSFS_FLAG_REMOVED));
+
+	if (!(sysfs_type(sd) & SYSFS_ACTIVE_REF))
+		return;
+
 	sd->s_sibling = (void *)&wait;
 
 	rwsem_acquire(&sd->dep_map, 0, 0, _RET_IP_);
@@ -354,7 +319,6 @@
 
 	atomic_set(&sd->s_count, 1);
 	atomic_set(&sd->s_active, 0);
-	sysfs_dirent_init_lockdep(sd);
 
 	sd->s_name = name;
 	sd->s_mode = mode;
@@ -681,7 +645,7 @@
 	}
 
 	/* attach dentry and inode */
-	inode = sysfs_get_inode(sd);
+	inode = sysfs_get_inode(dir->i_sb, sd);
 	if (!inode) {
 		ret = ERR_PTR(-ENOMEM);
 		goto out_unlock;
@@ -837,11 +801,46 @@
 	return (sd->s_mode >> 12) & 15;
 }
 
+static int sysfs_dir_release(struct inode *inode, struct file *filp)
+{
+	sysfs_put(filp->private_data);
+	return 0;
+}
+
+static struct sysfs_dirent *sysfs_dir_pos(struct sysfs_dirent *parent_sd,
+	ino_t ino, struct sysfs_dirent *pos)
+{
+	if (pos) {
+		int valid = !(pos->s_flags & SYSFS_FLAG_REMOVED) &&
+			pos->s_parent == parent_sd &&
+			ino == pos->s_ino;
+		sysfs_put(pos);
+		if (valid)
+			return pos;
+	}
+	pos = NULL;
+	if ((ino > 1) && (ino < INT_MAX)) {
+		pos = parent_sd->s_dir.children;
+		while (pos && (ino > pos->s_ino))
+			pos = pos->s_sibling;
+	}
+	return pos;
+}
+
+static struct sysfs_dirent *sysfs_dir_next_pos(struct sysfs_dirent *parent_sd,
+	ino_t ino, struct sysfs_dirent *pos)
+{
+	pos = sysfs_dir_pos(parent_sd, ino, pos);
+	if (pos)
+		pos = pos->s_sibling;
+	return pos;
+}
+
 static int sysfs_readdir(struct file * filp, void * dirent, filldir_t filldir)
 {
 	struct dentry *dentry = filp->f_path.dentry;
 	struct sysfs_dirent * parent_sd = dentry->d_fsdata;
-	struct sysfs_dirent *pos;
+	struct sysfs_dirent *pos = filp->private_data;
 	ino_t ino;
 
 	if (filp->f_pos == 0) {
@@ -857,29 +856,31 @@
 		if (filldir(dirent, "..", 2, filp->f_pos, ino, DT_DIR) == 0)
 			filp->f_pos++;
 	}
-	if ((filp->f_pos > 1) && (filp->f_pos < INT_MAX)) {
-		mutex_lock(&sysfs_mutex);
+	mutex_lock(&sysfs_mutex);
+	for (pos = sysfs_dir_pos(parent_sd, filp->f_pos, pos);
+	     pos;
+	     pos = sysfs_dir_next_pos(parent_sd, filp->f_pos, pos)) {
+		const char * name;
+		unsigned int type;
+		int len, ret;
 
-		/* Skip the dentries we have already reported */
-		pos = parent_sd->s_dir.children;
-		while (pos && (filp->f_pos > pos->s_ino))
-			pos = pos->s_sibling;
+		name = pos->s_name;
+		len = strlen(name);
+		ino = pos->s_ino;
+		type = dt_type(pos);
+		filp->f_pos = ino;
+		filp->private_data = sysfs_get(pos);
 
-		for ( ; pos; pos = pos->s_sibling) {
-			const char * name;
-			int len;
-
-			name = pos->s_name;
-			len = strlen(name);
-			filp->f_pos = ino = pos->s_ino;
-
-			if (filldir(dirent, name, len, filp->f_pos, ino,
-					 dt_type(pos)) < 0)
-				break;
-		}
-		if (!pos)
-			filp->f_pos = INT_MAX;
 		mutex_unlock(&sysfs_mutex);
+		ret = filldir(dirent, name, len, filp->f_pos, ino, type);
+		mutex_lock(&sysfs_mutex);
+		if (ret < 0)
+			break;
+	}
+	mutex_unlock(&sysfs_mutex);
+	if ((filp->f_pos > 1) && !pos) { /* EOF */
+		filp->f_pos = INT_MAX;
+		filp->private_data = NULL;
 	}
 	return 0;
 }
@@ -888,5 +889,6 @@
 const struct file_operations sysfs_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= sysfs_readdir,
+	.release	= sysfs_dir_release,
 	.llseek		= generic_file_llseek,
 };
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index dc30d9e..e222b25 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -53,7 +53,7 @@
 	size_t			count;
 	loff_t			pos;
 	char			* page;
-	struct sysfs_ops	* ops;
+	const struct sysfs_ops	* ops;
 	struct mutex		mutex;
 	int			needs_read_fill;
 	int			event;
@@ -75,7 +75,7 @@
 {
 	struct sysfs_dirent *attr_sd = dentry->d_fsdata;
 	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
-	struct sysfs_ops * ops = buffer->ops;
+	const struct sysfs_ops * ops = buffer->ops;
 	int ret = 0;
 	ssize_t count;
 
@@ -85,13 +85,13 @@
 		return -ENOMEM;
 
 	/* need attr_sd for attr and ops, its parent for kobj */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -ENODEV;
 
 	buffer->event = atomic_read(&attr_sd->s_attr.open->event);
 	count = ops->show(kobj, attr_sd->s_attr.attr, buffer->page);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 
 	/*
 	 * The code works fine with PAGE_SIZE return but it's likely to
@@ -199,16 +199,16 @@
 {
 	struct sysfs_dirent *attr_sd = dentry->d_fsdata;
 	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
-	struct sysfs_ops * ops = buffer->ops;
+	const struct sysfs_ops * ops = buffer->ops;
 	int rc;
 
 	/* need attr_sd for attr and ops, its parent for kobj */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -ENODEV;
 
 	rc = ops->store(kobj, attr_sd->s_attr.attr, buffer->page, count);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 
 	return rc;
 }
@@ -335,7 +335,7 @@
 	struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
 	struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
 	struct sysfs_buffer *buffer;
-	struct sysfs_ops *ops;
+	const struct sysfs_ops *ops;
 	int error = -EACCES;
 	char *p;
 
@@ -344,7 +344,7 @@
 		memmove(last_sysfs_file, p, strlen(p) + 1);
 
 	/* need attr_sd for attr and ops, its parent for kobj */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		return -ENODEV;
 
 	/* every kobject with an attribute needs a ktype assigned */
@@ -393,13 +393,13 @@
 		goto err_free;
 
 	/* open succeeded, put active references */
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return 0;
 
  err_free:
 	kfree(buffer);
  err_out:
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 	return error;
 }
 
@@ -437,12 +437,12 @@
 	struct sysfs_open_dirent *od = attr_sd->s_attr.open;
 
 	/* need parent for the kobj, grab both */
-	if (!sysfs_get_active_two(attr_sd))
+	if (!sysfs_get_active(attr_sd))
 		goto trigger;
 
 	poll_wait(filp, &od->poll, wait);
 
-	sysfs_put_active_two(attr_sd);
+	sysfs_put_active(attr_sd);
 
 	if (buffer->event != atomic_read(&od->event))
 		goto trigger;
@@ -509,6 +509,7 @@
 	if (!sd)
 		return -ENOMEM;
 	sd->s_attr.attr = (void *)attr;
+	sysfs_dirent_init_lockdep(sd);
 
 	sysfs_addrm_start(&acxt, dir_sd);
 	rc = sysfs_add_one(&acxt, sd);
@@ -542,6 +543,18 @@
 
 }
 
+int sysfs_create_files(struct kobject *kobj, const struct attribute **ptr)
+{
+	int err = 0;
+	int i;
+
+	for (i = 0; ptr[i] && !err; i++)
+		err = sysfs_create_file(kobj, ptr[i]);
+	if (err)
+		while (--i >= 0)
+			sysfs_remove_file(kobj, ptr[i]);
+	return err;
+}
 
 /**
  * sysfs_add_file_to_group - add an attribute file to a pre-existing group.
@@ -614,6 +627,12 @@
 	sysfs_hash_and_remove(kobj->sd, attr->name);
 }
 
+void sysfs_remove_files(struct kobject * kobj, const struct attribute **ptr)
+{
+	int i;
+	for (i = 0; ptr[i]; i++)
+		sysfs_remove_file(kobj, ptr[i]);
+}
 
 /**
  * sysfs_remove_file_from_group - remove an attribute file from a group.
@@ -732,3 +751,5 @@
 
 EXPORT_SYMBOL_GPL(sysfs_create_file);
 EXPORT_SYMBOL_GPL(sysfs_remove_file);
+EXPORT_SYMBOL_GPL(sysfs_remove_files);
+EXPORT_SYMBOL_GPL(sysfs_create_files);
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 6a06a1d..082daae 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -111,20 +111,20 @@
 	if (!sd)
 		return -EINVAL;
 
+	mutex_lock(&sysfs_mutex);
 	error = inode_change_ok(inode, iattr);
 	if (error)
-		return error;
+		goto out;
 
 	iattr->ia_valid &= ~ATTR_SIZE; /* ignore size changes */
 
 	error = inode_setattr(inode, iattr);
 	if (error)
-		return error;
+		goto out;
 
-	mutex_lock(&sysfs_mutex);
 	error = sysfs_sd_setattr(sd, iattr);
+out:
 	mutex_unlock(&sysfs_mutex);
-
 	return error;
 }
 
@@ -283,6 +283,7 @@
 
 /**
  *	sysfs_get_inode - get inode for sysfs_dirent
+ *	@sb: super block
  *	@sd: sysfs_dirent to allocate inode for
  *
  *	Get inode for @sd.  If such inode doesn't exist, a new inode
@@ -295,11 +296,11 @@
  *	RETURNS:
  *	Pointer to allocated inode on success, NULL on failure.
  */
-struct inode * sysfs_get_inode(struct sysfs_dirent *sd)
+struct inode * sysfs_get_inode(struct super_block *sb, struct sysfs_dirent *sd)
 {
 	struct inode *inode;
 
-	inode = iget_locked(sysfs_sb, sd->s_ino);
+	inode = iget_locked(sb, sd->s_ino);
 	if (inode && (inode->i_state & I_NEW))
 		sysfs_init_inode(sd, inode);
 
diff --git a/fs/sysfs/mount.c b/fs/sysfs/mount.c
index 4974995..0cb1088 100644
--- a/fs/sysfs/mount.c
+++ b/fs/sysfs/mount.c
@@ -23,7 +23,6 @@
 
 
 static struct vfsmount *sysfs_mount;
-struct super_block * sysfs_sb = NULL;
 struct kmem_cache *sysfs_dir_cachep;
 
 static const struct super_operations sysfs_ops = {
@@ -50,11 +49,10 @@
 	sb->s_magic = SYSFS_MAGIC;
 	sb->s_op = &sysfs_ops;
 	sb->s_time_gran = 1;
-	sysfs_sb = sb;
 
 	/* get root inode, initialize and unlock it */
 	mutex_lock(&sysfs_mutex);
-	inode = sysfs_get_inode(&sysfs_root);
+	inode = sysfs_get_inode(sb, &sysfs_root);
 	mutex_unlock(&sysfs_mutex);
 	if (!inode) {
 		pr_debug("sysfs: could not get root inode\n");
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index c5eff49..1b9a3a1 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -123,6 +123,44 @@
 	sysfs_hash_and_remove(parent_sd, name);
 }
 
+/**
+ *	sysfs_rename_link - rename symlink in object's directory.
+ *	@kobj:	object we're acting for.
+ *	@targ:	object we're pointing to.
+ *	@old:	previous name of the symlink.
+ *	@new:	new name of the symlink.
+ *
+ *	A helper function for the common rename symlink idiom.
+ */
+int sysfs_rename_link(struct kobject *kobj, struct kobject *targ,
+			const char *old, const char *new)
+{
+	struct sysfs_dirent *parent_sd, *sd = NULL;
+	int result;
+
+	if (!kobj)
+		parent_sd = &sysfs_root;
+	else
+		parent_sd = kobj->sd;
+
+	result = -ENOENT;
+	sd = sysfs_get_dirent(parent_sd, old);
+	if (!sd)
+		goto out;
+
+	result = -EINVAL;
+	if (sysfs_type(sd) != SYSFS_KOBJ_LINK)
+		goto out;
+	if (sd->s_symlink.target_sd->s_dir.kobj != targ)
+		goto out;
+
+	result = sysfs_rename(sd, parent_sd, new);
+
+out:
+	sysfs_put(sd);
+	return result;
+}
+
 static int sysfs_get_target_path(struct sysfs_dirent *parent_sd,
 				 struct sysfs_dirent *target_sd, char *path)
 {
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index cdd9377..30f5a44 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -66,8 +66,8 @@
 	};
 
 	unsigned int		s_flags;
+	unsigned short		s_mode;
 	ino_t			s_ino;
-	umode_t			s_mode;
 	struct sysfs_inode_attrs *s_iattr;
 };
 
@@ -79,6 +79,7 @@
 #define SYSFS_KOBJ_BIN_ATTR		0x0004
 #define SYSFS_KOBJ_LINK			0x0008
 #define SYSFS_COPY_NAME			(SYSFS_DIR | SYSFS_KOBJ_LINK)
+#define SYSFS_ACTIVE_REF		(SYSFS_KOBJ_ATTR | SYSFS_KOBJ_BIN_ATTR)
 
 #define SYSFS_FLAG_MASK			~SYSFS_TYPE_MASK
 #define SYSFS_FLAG_REMOVED		0x0200
@@ -91,9 +92,12 @@
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 #define sysfs_dirent_init_lockdep(sd)				\
 do {								\
-	static struct lock_class_key __key;			\
+	struct attribute *attr = sd->s_attr.attr;		\
+	struct lock_class_key *key = attr->key;			\
+	if (!key)						\
+		key = &attr->skey;				\
 								\
-	lockdep_init_map(&sd->dep_map, "s_active", &__key, 0);	\
+	lockdep_init_map(&sd->dep_map, "s_active", key, 0);	\
 } while(0)
 #else
 #define sysfs_dirent_init_lockdep(sd) do {} while(0)
@@ -111,7 +115,6 @@
  * mount.c
  */
 extern struct sysfs_dirent sysfs_root;
-extern struct super_block *sysfs_sb;
 extern struct kmem_cache *sysfs_dir_cachep;
 
 /*
@@ -124,8 +127,8 @@
 extern const struct inode_operations sysfs_dir_inode_operations;
 
 struct dentry *sysfs_get_dentry(struct sysfs_dirent *sd);
-struct sysfs_dirent *sysfs_get_active_two(struct sysfs_dirent *sd);
-void sysfs_put_active_two(struct sysfs_dirent *sd);
+struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd);
+void sysfs_put_active(struct sysfs_dirent *sd);
 void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt,
 		       struct sysfs_dirent *parent_sd);
 int __sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd);
@@ -168,7 +171,7 @@
 /*
  * inode.c
  */
-struct inode *sysfs_get_inode(struct sysfs_dirent *sd);
+struct inode *sysfs_get_inode(struct super_block *sb, struct sysfs_dirent *sd);
 void sysfs_delete_inode(struct inode *inode);
 int sysfs_sd_setattr(struct sysfs_dirent *sd, struct iattr *iattr);
 int sysfs_permission(struct inode *inode, int mask);
diff --git a/fs/udf/balloc.c b/fs/udf/balloc.c
index ccc3ad7..19626e2 100644
--- a/fs/udf/balloc.c
+++ b/fs/udf/balloc.c
@@ -31,55 +31,8 @@
 #define udf_clear_bit(nr, addr) ext2_clear_bit(nr, addr)
 #define udf_set_bit(nr, addr) ext2_set_bit(nr, addr)
 #define udf_test_bit(nr, addr) ext2_test_bit(nr, addr)
-#define udf_find_first_one_bit(addr, size) find_first_one_bit(addr, size)
 #define udf_find_next_one_bit(addr, size, offset) \
-		find_next_one_bit(addr, size, offset)
-
-#define leBPL_to_cpup(x) leNUM_to_cpup(BITS_PER_LONG, x)
-#define leNUM_to_cpup(x, y) xleNUM_to_cpup(x, y)
-#define xleNUM_to_cpup(x, y) (le ## x ## _to_cpup(y))
-#define uintBPL_t uint(BITS_PER_LONG)
-#define uint(x) xuint(x)
-#define xuint(x) __le ## x
-
-static inline int find_next_one_bit(void *addr, int size, int offset)
-{
-	uintBPL_t *p = ((uintBPL_t *) addr) + (offset / BITS_PER_LONG);
-	int result = offset & ~(BITS_PER_LONG - 1);
-	unsigned long tmp;
-
-	if (offset >= size)
-		return size;
-	size -= result;
-	offset &= (BITS_PER_LONG - 1);
-	if (offset) {
-		tmp = leBPL_to_cpup(p++);
-		tmp &= ~0UL << offset;
-		if (size < BITS_PER_LONG)
-			goto found_first;
-		if (tmp)
-			goto found_middle;
-		size -= BITS_PER_LONG;
-		result += BITS_PER_LONG;
-	}
-	while (size & ~(BITS_PER_LONG - 1)) {
-		tmp = leBPL_to_cpup(p++);
-		if (tmp)
-			goto found_middle;
-		result += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-	}
-	if (!size)
-		return result;
-	tmp = leBPL_to_cpup(p);
-found_first:
-	tmp &= ~0UL >> (BITS_PER_LONG - size);
-found_middle:
-	return result + ffz(~tmp);
-}
-
-#define find_first_one_bit(addr, size)\
-	find_next_one_bit((addr), (size), 0)
+		ext2_find_next_bit(addr, size, offset)
 
 static int read_block_bitmap(struct super_block *sb,
 			     struct udf_bitmap *bitmap, unsigned int block,
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index b57ab04..bb863fe 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -106,7 +106,7 @@
 	if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
 	    inode->i_size != iinfo->i_lenExtents) {
 		printk(KERN_WARNING "UDF-fs (%s): Inode %lu (mode %o) has "
-			"inode size %llu different from extent lenght %llu. "
+			"inode size %llu different from extent length %llu. "
 			"Filesystem need not be standards compliant.\n",
 			inode->i_sb->s_id, inode->i_ino, inode->i_mode,
 			(unsigned long long)inode->i_size,
@@ -1408,20 +1408,19 @@
 	unsigned char blocksize_bits = inode->i_sb->s_blocksize_bits;
 	struct udf_inode_info *iinfo = UDF_I(inode);
 
-	bh = udf_tread(inode->i_sb,
-			udf_get_lb_pblock(inode->i_sb,
-					  &iinfo->i_location, 0));
+	bh = udf_tgetblk(inode->i_sb,
+			udf_get_lb_pblock(inode->i_sb, &iinfo->i_location, 0));
 	if (!bh) {
-		udf_debug("bread failure\n");
-		return -EIO;
+		udf_debug("getblk failure\n");
+		return -ENOMEM;
 	}
 
-	memset(bh->b_data, 0x00, inode->i_sb->s_blocksize);
-
+	lock_buffer(bh);
+	memset(bh->b_data, 0, inode->i_sb->s_blocksize);
 	fe = (struct fileEntry *)bh->b_data;
 	efe = (struct extendedFileEntry *)bh->b_data;
 
-	if (fe->descTag.tagIdent == cpu_to_le16(TAG_IDENT_USE)) {
+	if (iinfo->i_use) {
 		struct unallocSpaceEntry *use =
 			(struct unallocSpaceEntry *)bh->b_data;
 
@@ -1429,20 +1428,18 @@
 		memcpy(bh->b_data + sizeof(struct unallocSpaceEntry),
 		       iinfo->i_ext.i_data, inode->i_sb->s_blocksize -
 					sizeof(struct unallocSpaceEntry));
+		use->descTag.tagIdent = cpu_to_le16(TAG_IDENT_USE);
+		use->descTag.tagLocation =
+				cpu_to_le32(iinfo->i_location.logicalBlockNum);
 		crclen = sizeof(struct unallocSpaceEntry) +
 				iinfo->i_lenAlloc - sizeof(struct tag);
-		use->descTag.tagLocation = cpu_to_le32(
-						iinfo->i_location.
-							logicalBlockNum);
 		use->descTag.descCRCLength = cpu_to_le16(crclen);
 		use->descTag.descCRC = cpu_to_le16(crc_itu_t(0, (char *)use +
 							   sizeof(struct tag),
 							   crclen));
 		use->descTag.tagChecksum = udf_tag_checksum(&use->descTag);
 
-		mark_buffer_dirty(bh);
-		brelse(bh);
-		return err;
+		goto out;
 	}
 
 	if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_UID_FORGET))
@@ -1597,18 +1594,21 @@
 	fe->descTag.tagSerialNum = cpu_to_le16(sbi->s_serial_number);
 	fe->descTag.tagLocation = cpu_to_le32(
 					iinfo->i_location.logicalBlockNum);
-	crclen += iinfo->i_lenEAttr + iinfo->i_lenAlloc -
-								sizeof(struct tag);
+	crclen += iinfo->i_lenEAttr + iinfo->i_lenAlloc - sizeof(struct tag);
 	fe->descTag.descCRCLength = cpu_to_le16(crclen);
 	fe->descTag.descCRC = cpu_to_le16(crc_itu_t(0, (char *)fe + sizeof(struct tag),
 						  crclen));
 	fe->descTag.tagChecksum = udf_tag_checksum(&fe->descTag);
 
+out:
+	set_buffer_uptodate(bh);
+	unlock_buffer(bh);
+
 	/* write the data blocks */
 	mark_buffer_dirty(bh);
 	if (do_sync) {
 		sync_dirty_buffer(bh);
-		if (buffer_req(bh) && !buffer_uptodate(bh)) {
+		if (buffer_write_io_error(bh)) {
 			printk(KERN_WARNING "IO error syncing udf inode "
 				"[%s:%08lx]\n", inode->i_sb->s_id,
 				inode->i_ino);
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 66b63a7..14743d9 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -1016,6 +1016,9 @@
 		case UFS_FSSTABLE:
 			UFSD("fs is stable\n");
 			break;
+		case UFS_FSLOG:
+			UFSD("fs is logging fs\n");
+			break;
 		case UFS_FSOSF1:
 			UFSD("fs is DEC OSF/1\n");
 			break;
diff --git a/fs/ufs/ufs_fs.h b/fs/ufs/ufs_fs.h
index 54bde18..6943ec67 100644
--- a/fs/ufs/ufs_fs.h
+++ b/fs/ufs/ufs_fs.h
@@ -138,6 +138,7 @@
 
 #define UFS_USEEFT  ((__u16)65535)
 
+/* fs_clean values */
 #define UFS_FSOK      0x7c269d38
 #define UFS_FSACTIVE  ((__s8)0x00)
 #define UFS_FSCLEAN   ((__s8)0x01)
@@ -145,6 +146,11 @@
 #define UFS_FSOSF1    ((__s8)0x03)	/* is this correct for DEC OSF/1? */
 #define UFS_FSBAD     ((__s8)0xff)
 
+/* Solaris-specific fs_clean values */
+#define UFS_FSSUSPEND ((__s8)0xfe)	/* temporarily suspended */
+#define UFS_FSLOG     ((__s8)0xfd)	/* logging fs */
+#define UFS_FSFIX     ((__s8)0xfc)	/* being repaired while mounted */
+
 /* From here to next blank line, s_flags for ufs_sb_info */
 /* directory entry encoding */
 #define UFS_DE_MASK		0x00000010	/* mask for the following */
@@ -227,11 +233,16 @@
  */
 #define ufs_cbtocylno(bno) \
 	((bno) * uspi->s_nspf / uspi->s_spc)
-#define ufs_cbtorpos(bno) \
+#define ufs_cbtorpos(bno)				      \
+	((UFS_SB(sb)->s_flags & UFS_CG_SUN) ?		      \
+	 (((((bno) * uspi->s_nspf % uspi->s_spc) %	      \
+	    uspi->s_nsect) *				      \
+	   uspi->s_nrpos) / uspi->s_nsect)		      \
+	 :						      \
 	((((bno) * uspi->s_nspf % uspi->s_spc / uspi->s_nsect \
 	* uspi->s_trackskew + (bno) * uspi->s_nspf % uspi->s_spc \
 	% uspi->s_nsect * uspi->s_interleave) % uspi->s_nsect \
-	* uspi->s_nrpos) / uspi->s_npsect)
+	  * uspi->s_nrpos) / uspi->s_npsect))
 
 /*
  * The following macros optimize certain frequently calculated
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 1172c27..86825dd 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -320,8 +320,16 @@
 
 #endif				/* CONFIG_CPU_FREQ */
 
-/* in processor_pdc.c */
+/* in processor_core.c */
 void acpi_processor_set_pdc(acpi_handle handle);
+#ifdef CONFIG_SMP
+int acpi_get_cpuid(acpi_handle, int type, u32 acpi_id);
+#else
+static inline int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id)
+{
+	return -1;
+}
+#endif
 
 /* in processor_throttling.c */
 int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
diff --git a/include/asm-generic/pci-dma-compat.h b/include/asm-generic/pci-dma-compat.h
index 37b3706..1437b7d 100644
--- a/include/asm-generic/pci-dma-compat.h
+++ b/include/asm-generic/pci-dma-compat.h
@@ -6,9 +6,6 @@
 
 #include <linux/dma-mapping.h>
 
-/* note pci_set_dma_mask isn't here, since it's a public function
- * exported from drivers/pci, use dma_supported instead */
-
 static inline int
 pci_dma_supported(struct pci_dev *hwdev, u64 mask)
 {
@@ -104,4 +101,16 @@
 	return dma_mapping_error(&pdev->dev, dma_addr);
 }
 
+#ifdef CONFIG_PCI
+static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return dma_set_mask(&dev->dev, mask);
+}
+
+static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return dma_set_coherent_mask(&dev->dev, mask);
+}
+#endif
+
 #endif
diff --git a/include/linux/acct.h b/include/linux/acct.h
index 882dc72..3e4737f 100644
--- a/include/linux/acct.h
+++ b/include/linux/acct.h
@@ -121,16 +121,15 @@
 struct super_block;
 struct pacct_struct;
 struct pid_namespace;
+extern int acct_parm[]; /* for sysctl */
 extern void acct_auto_close_mnt(struct vfsmount *m);
 extern void acct_auto_close(struct super_block *sb);
-extern void acct_init_pacct(struct pacct_struct *pacct);
 extern void acct_collect(long exitcode, int group_dead);
 extern void acct_process(void);
 extern void acct_exit_ns(struct pid_namespace *);
 #else
 #define acct_auto_close_mnt(x)	do { } while (0)
 #define acct_auto_close(x)	do { } while (0)
-#define acct_init_pacct(x)	do { } while (0)
 #define acct_collect(x,y)	do { } while (0)
 #define acct_process()		do { } while (0)
 #define acct_exit_ns(ns)	do { } while (0)
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index c9bbcb2..b8ad1ea9 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -37,16 +37,24 @@
 extern void cgroup_exit(struct task_struct *p, int run_callbacks);
 extern int cgroupstats_build(struct cgroupstats *stats,
 				struct dentry *dentry);
+extern int cgroup_load_subsys(struct cgroup_subsys *ss);
+extern void cgroup_unload_subsys(struct cgroup_subsys *ss);
 
 extern const struct file_operations proc_cgroup_operations;
 
-/* Define the enumeration of all cgroup subsystems */
+/* Define the enumeration of all builtin cgroup subsystems */
 #define SUBSYS(_x) _x ## _subsys_id,
 enum cgroup_subsys_id {
 #include <linux/cgroup_subsys.h>
-	CGROUP_SUBSYS_COUNT
+	CGROUP_BUILTIN_SUBSYS_COUNT
 };
 #undef SUBSYS
+/*
+ * This define indicates the maximum number of subsystems that can be loaded
+ * at once. We limit to this many since cgroupfs_root has subsys_bits to keep
+ * track of all of them.
+ */
+#define CGROUP_SUBSYS_COUNT (BITS_PER_BYTE*sizeof(unsigned long))
 
 /* Per-subsystem/per-cgroup state maintained by the system. */
 struct cgroup_subsys_state {
@@ -76,6 +84,12 @@
 	CSS_REMOVED, /* This CSS is dead */
 };
 
+/* Caller must verify that the css is not for root cgroup */
+static inline void __css_get(struct cgroup_subsys_state *css, int count)
+{
+	atomic_add(count, &css->refcnt);
+}
+
 /*
  * Call css_get() to hold a reference on the css; it can be used
  * for a reference obtained via:
@@ -87,7 +101,7 @@
 {
 	/* We don't need to reference count the root state */
 	if (!test_bit(CSS_ROOT, &css->flags))
-		atomic_inc(&css->refcnt);
+		__css_get(css, 1);
 }
 
 static inline bool css_is_removed(struct cgroup_subsys_state *css)
@@ -118,11 +132,11 @@
  * css_get() or css_tryget()
  */
 
-extern void __css_put(struct cgroup_subsys_state *css);
+extern void __css_put(struct cgroup_subsys_state *css, int count);
 static inline void css_put(struct cgroup_subsys_state *css)
 {
 	if (!test_bit(CSS_ROOT, &css->flags))
-		__css_put(css);
+		__css_put(css, 1);
 }
 
 /* bits in struct cgroup flags field */
@@ -221,6 +235,10 @@
 
 	/* For RCU-protected deletion */
 	struct rcu_head rcu_head;
+
+	/* List of events which userspace want to recieve */
+	struct list_head event_list;
+	spinlock_t event_list_lock;
 };
 
 /*
@@ -258,7 +276,8 @@
 	/*
 	 * Set of subsystem states, one for each subsystem. This array
 	 * is immutable after creation apart from the init_css_set
-	 * during subsystem registration (at boot time).
+	 * during subsystem registration (at boot time) and modular subsystem
+	 * loading/unloading.
 	 */
 	struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT];
 
@@ -363,6 +382,23 @@
 	int (*trigger)(struct cgroup *cgrp, unsigned int event);
 
 	int (*release)(struct inode *inode, struct file *file);
+
+	/*
+	 * register_event() callback will be used to add new userspace
+	 * waiter for changes related to the cftype. Implement it if
+	 * you want to provide this functionality. Use eventfd_signal()
+	 * on eventfd to send notification to userspace.
+	 */
+	int (*register_event)(struct cgroup *cgrp, struct cftype *cft,
+			struct eventfd_ctx *eventfd, const char *args);
+	/*
+	 * unregister_event() callback will be called when userspace
+	 * closes the eventfd or on cgroup removing.
+	 * This callback must be implemented, if you want provide
+	 * notification functionality.
+	 */
+	int (*unregister_event)(struct cgroup *cgrp, struct cftype *cft,
+			struct eventfd_ctx *eventfd);
 };
 
 struct cgroup_scanner {
@@ -428,6 +464,8 @@
 	void (*destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp);
 	int (*can_attach)(struct cgroup_subsys *ss, struct cgroup *cgrp,
 			  struct task_struct *tsk, bool threadgroup);
+	void (*cancel_attach)(struct cgroup_subsys *ss, struct cgroup *cgrp,
+			  struct task_struct *tsk, bool threadgroup);
 	void (*attach)(struct cgroup_subsys *ss, struct cgroup *cgrp,
 			struct cgroup *old_cgrp, struct task_struct *tsk,
 			bool threadgroup);
@@ -472,6 +510,9 @@
 	/* used when use_id == true */
 	struct idr idr;
 	spinlock_t id_lock;
+
+	/* should be defined only by modular subsystems */
+	struct module *module;
 };
 
 #define SUBSYS(_x) extern struct cgroup_subsys _x ## _subsys;
diff --git a/include/linux/compat.h b/include/linux/compat.h
index ef68119..717c691 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -23,6 +23,7 @@
 typedef __compat_uid32_t	compat_uid_t;
 typedef __compat_gid32_t	compat_gid_t;
 
+struct compat_sel_arg_struct;
 struct rusage;
 
 struct compat_itimerspec { 
@@ -249,6 +250,8 @@
 		compat_ulong_t __user *outp, compat_ulong_t __user *exp,
 		struct compat_timeval __user *tvp);
 
+asmlinkage long compat_sys_old_select(struct compat_sel_arg_struct __user *arg);
+
 asmlinkage long compat_sys_wait4(compat_pid_t pid,
 				 compat_uint_t __user *stat_addr, int options,
 				 struct compat_rusage __user *ru);
diff --git a/include/linux/coredump.h b/include/linux/coredump.h
index b3c91d7..8ba66a9 100644
--- a/include/linux/coredump.h
+++ b/include/linux/coredump.h
@@ -16,6 +16,8 @@
 
 static inline int dump_seek(struct file *file, loff_t off)
 {
+	int ret = 1;
+
 	if (file->f_op->llseek && file->f_op->llseek != no_llseek) {
 		if (file->f_op->llseek(file, off, SEEK_CUR) < 0)
 			return 0;
@@ -29,13 +31,15 @@
 
 			if (n > PAGE_SIZE)
 				n = PAGE_SIZE;
-			if (!dump_write(file, buf, n))
-				return 0;
+			if (!dump_write(file, buf, n)) {
+				ret = 0;
+				break;
+			}
 			off -= n;
 		}
 		free_page((unsigned long)buf);
 	}
-	return 1;
+	return ret;
 }
 
 #endif /* _LINUX_COREDUMP_H */
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 4db09f8..52507c3 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -280,7 +280,7 @@
  * task or by holding tasklist_lock to prevent it from being unlinked.
  */
 #define __task_cred(task) \
-	((const struct cred *)(rcu_dereference_check((task)->real_cred, rcu_read_lock_held() || lockdep_is_held(&tasklist_lock))))
+	((const struct cred *)(rcu_dereference_check((task)->real_cred, rcu_read_lock_held() || lockdep_tasklist_lock_is_held())))
 
 /**
  * get_task_cred - Get another task's objective credentials
diff --git a/include/linux/decompress/mm.h b/include/linux/decompress/mm.h
index 5032b9a..ad5ec1d 100644
--- a/include/linux/decompress/mm.h
+++ b/include/linux/decompress/mm.h
@@ -14,11 +14,21 @@
 
 /* Code active when included from pre-boot environment: */
 
+/*
+ * Some architectures want to ensure there is no local data in their
+ * pre-boot environment, so that data can arbitarily relocated (via
+ * GOT references).  This is achieved by defining STATIC_RW_DATA to
+ * be null.
+ */
+#ifndef STATIC_RW_DATA
+#define STATIC_RW_DATA static
+#endif
+
 /* A trivial malloc implementation, adapted from
  *  malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
  */
-static unsigned long malloc_ptr;
-static int malloc_count;
+STATIC_RW_DATA unsigned long malloc_ptr;
+STATIC_RW_DATA int malloc_count;
 
 static void *malloc(int size)
 {
diff --git a/include/linux/device.h b/include/linux/device.h
index b30527d..1821928 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -106,7 +106,7 @@
 
 /* All 4 notifers below get called with the target struct device *
  * as an argument. Note that those functions are likely to be called
- * with the device semaphore held in the core, so be careful.
+ * with the device lock held in the core, so be careful.
  */
 #define BUS_NOTIFY_ADD_DEVICE		0x00000001 /* device added */
 #define BUS_NOTIFY_DEL_DEVICE		0x00000002 /* device removed */
@@ -251,8 +251,10 @@
 
 struct class_attribute {
 	struct attribute attr;
-	ssize_t (*show)(struct class *class, char *buf);
-	ssize_t (*store)(struct class *class, const char *buf, size_t count);
+	ssize_t (*show)(struct class *class, struct class_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct class *class, struct class_attribute *attr,
+			const char *buf, size_t count);
 };
 
 #define CLASS_ATTR(_name, _mode, _show, _store)			\
@@ -263,6 +265,23 @@
 extern void class_remove_file(struct class *class,
 			      const struct class_attribute *attr);
 
+/* Simple class attribute that is just a static string */
+
+struct class_attribute_string {
+	struct class_attribute attr;
+	char *str;
+};
+
+/* Currently read-only only */
+#define _CLASS_ATTR_STRING(_name, _mode, _str) \
+	{ __ATTR(_name, _mode, show_class_attr_string, NULL), _str }
+#define CLASS_ATTR_STRING(_name, _mode, _str) \
+	struct class_attribute_string class_attr_##_name = \
+		_CLASS_ATTR_STRING(_name, _mode, _str)
+
+extern ssize_t show_class_attr_string(struct class *class, struct class_attribute *attr,
+                        char *buf);
+
 struct class_interface {
 	struct list_head	node;
 	struct class		*class;
@@ -489,6 +508,21 @@
 	return !!dev->power.async_suspend;
 }
 
+static inline void device_lock(struct device *dev)
+{
+	down(&dev->sem);
+}
+
+static inline int device_trylock(struct device *dev)
+{
+	return down_trylock(&dev->sem);
+}
+
+static inline void device_unlock(struct device *dev)
+{
+	up(&dev->sem);
+}
+
 void driver_init(void);
 
 /*
diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h
index c30879c..96e8769 100644
--- a/include/linux/dm9000.h
+++ b/include/linux/dm9000.h
@@ -23,7 +23,7 @@
 #define DM9000_PLATF_NO_EEPROM	(0x0010)
 #define DM9000_PLATF_SIMPLE_PHY (0x0020)  /* Use NSR to find LinkStatus */
 
-/* platfrom data for platfrom device structure's platfrom_data field */
+/* platform data for platform device structure's platform_data field */
 
 struct dm9000_plat_data {
 	unsigned int	flags;
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 91b7618..ca32ed7 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -127,6 +127,14 @@
 	return DMA_BIT_MASK(32);
 }
 
+static inline int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (!dma_supported(dev, mask))
+		return -EIO;
+	dev->coherent_dma_mask = mask;
+	return 0;
+}
+
 extern u64 dma_get_required_mask(struct device *dev);
 
 static inline unsigned int dma_get_max_seg_size(struct device *dev)
@@ -232,4 +240,20 @@
 
 #endif /* CONFIG_HAVE_DMA_ATTRS */
 
+#ifdef CONFIG_NEED_DMA_MAP_STATE
+#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)        dma_addr_t ADDR_NAME
+#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)          __u32 LEN_NAME
+#define dma_unmap_addr(PTR, ADDR_NAME)           ((PTR)->ADDR_NAME)
+#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  (((PTR)->ADDR_NAME) = (VAL))
+#define dma_unmap_len(PTR, LEN_NAME)             ((PTR)->LEN_NAME)
+#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    (((PTR)->LEN_NAME) = (VAL))
+#else
+#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)
+#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)
+#define dma_unmap_addr(PTR, ADDR_NAME)           (0)
+#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  do { } while (0)
+#define dma_unmap_len(PTR, LEN_NAME)             (0)
+#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    do { } while (0)
+#endif
+
 #endif
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index cca1c3de..b33f316 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -61,6 +61,13 @@
 				/* For PCI devices, use pci_name(pci_dev). */
 	char	reserved1[32];
 	char	reserved2[12];
+				/*
+				 * Some struct members below are filled in
+				 * using ops->get_sset_count().  Obtaining
+				 * this info from ethtool_drvinfo is now
+				 * deprecated; Use ETHTOOL_GSSET_INFO
+				 * instead.
+				 */
 	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
 	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
 	__u32	testinfo_len;
@@ -253,6 +260,17 @@
 	__u8	data[0];
 };
 
+struct ethtool_sset_info {
+	__u32	cmd;		/* ETHTOOL_GSSET_INFO */
+	__u32	reserved;
+	__u64	sset_mask;	/* input: each bit selects an sset to query */
+				/* output: each bit a returned sset */
+	__u32	data[0];	/* ETH_SS_xxx count, in order, based on bits
+				   in sset_mask.  One bit implies one
+				   __u32, two bits implies two
+				   __u32's, etc. */
+};
+
 enum ethtool_test_flags {
 	ETH_TEST_FL_OFFLINE	= (1 << 0),	/* online / offline */
 	ETH_TEST_FL_FAILED	= (1 << 1),	/* test passed / failed */
@@ -606,9 +624,9 @@
 #define	ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
 #define	ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
 #define	ETHTOOL_RESET		0x00000034 /* Reset hardware */
-
-#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
-#define ETHTOOL_GRXNTUPLE	0x00000036 /* Get n-tuple filters from device */
+#define	ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
+#define	ETHTOOL_GRXNTUPLE	0x00000036 /* Get n-tuple filters from device */
+#define	ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
diff --git a/include/linux/hil.h b/include/linux/hil.h
index 13352d7..523785a 100644
--- a/include/linux/hil.h
+++ b/include/linux/hil.h
@@ -168,14 +168,14 @@
 	HIL_CMD_PR6	= 0x45,	/* Prompt6 */
 	HIL_CMD_PR7	= 0x46,	/* Prompt7 */
 	HIL_CMD_PRM	= 0x47,	/* Prompt (General Purpose) */
-	HIL_CMD_AK1	= 0x48,	/* Acknowlege1 */  
-	HIL_CMD_AK2	= 0x49,	/* Acknowlege2 */
-	HIL_CMD_AK3	= 0x4a,	/* Acknowlege3 */
-	HIL_CMD_AK4	= 0x4b,	/* Acknowlege4 */
-	HIL_CMD_AK5	= 0x4c,	/* Acknowlege5 */
-	HIL_CMD_AK6	= 0x4d,	/* Acknowlege6 */
-	HIL_CMD_AK7	= 0x4e,	/* Acknowlege7 */
-	HIL_CMD_ACK	= 0x4f,	/* Acknowlege (General Purpose) */
+	HIL_CMD_AK1	= 0x48,	/* Acknowledge1 */  
+	HIL_CMD_AK2	= 0x49,	/* Acknowledge2 */
+	HIL_CMD_AK3	= 0x4a,	/* Acknowledge3 */
+	HIL_CMD_AK4	= 0x4b,	/* Acknowledge4 */
+	HIL_CMD_AK5	= 0x4c,	/* Acknowledge5 */
+	HIL_CMD_AK6	= 0x4d,	/* Acknowledge6 */
+	HIL_CMD_AK7	= 0x4e,	/* Acknowledge7 */
+	HIL_CMD_ACK	= 0x4f,	/* Acknowledge (General Purpose) */
 
 	/* 0x50 to 0x78 reserved for future use  */
 	/* 0x80 to 0xEF device-specific commands */
diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h
index 5977b72..c70d27a 100644
--- a/include/linux/hw_breakpoint.h
+++ b/include/linux/hw_breakpoint.h
@@ -66,14 +66,14 @@
 				perf_overflow_handler_t	triggered,
 				int cpu);
 
-extern struct perf_event **
+extern struct perf_event * __percpu *
 register_wide_hw_breakpoint(struct perf_event_attr *attr,
 			    perf_overflow_handler_t triggered);
 
 extern int register_perf_hw_breakpoint(struct perf_event *bp);
 extern int __register_perf_hw_breakpoint(struct perf_event *bp);
 extern void unregister_hw_breakpoint(struct perf_event *bp);
-extern void unregister_wide_hw_breakpoint(struct perf_event **cpu_events);
+extern void unregister_wide_hw_breakpoint(struct perf_event * __percpu *cpu_events);
 
 extern int dbg_reserve_bp_slot(struct perf_event *bp);
 extern int dbg_release_bp_slot(struct perf_event *bp);
@@ -100,7 +100,7 @@
 register_wide_hw_breakpoint_cpu(struct perf_event_attr *attr,
 				perf_overflow_handler_t	 triggered,
 				int cpu)		{ return NULL; }
-static inline struct perf_event **
+static inline struct perf_event * __percpu *
 register_wide_hw_breakpoint(struct perf_event_attr *attr,
 			    perf_overflow_handler_t triggered)	{ return NULL; }
 static inline int
@@ -109,7 +109,7 @@
 __register_perf_hw_breakpoint(struct perf_event *bp) 	{ return -ENOSYS; }
 static inline void unregister_hw_breakpoint(struct perf_event *bp)	{ }
 static inline void
-unregister_wide_hw_breakpoint(struct perf_event **cpu_events)		{ }
+unregister_wide_hw_breakpoint(struct perf_event * __percpu *cpu_events)	{ }
 static inline int
 reserve_bp_slot(struct perf_event *bp)			{return -ENOSYS; }
 static inline void release_bp_slot(struct perf_event *bp) 		{ }
diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h
index 111334f..4f98148 100644
--- a/include/linux/i2c-algo-bit.h
+++ b/include/linux/i2c-algo-bit.h
@@ -36,6 +36,8 @@
 	void (*setscl) (void *data, int state);
 	int  (*getsda) (void *data);
 	int  (*getscl) (void *data);
+	int  (*pre_xfer)  (struct i2c_adapter *);
+	void (*post_xfer) (struct i2c_adapter *);
 
 	/* local settings */
 	int udelay;		/* half clock cycle time in us,
diff --git a/include/linux/i2c-xiic.h b/include/linux/i2c-xiic.h
new file mode 100644
index 0000000..4f9f225
--- /dev/null
+++ b/include/linux/i2c-xiic.h
@@ -0,0 +1,43 @@
+/*
+ * i2c-xiic.h
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Xilinx IIC
+ */
+
+#ifndef _LINUX_I2C_XIIC_H
+#define _LINUX_I2C_XIIC_H
+
+/**
+ * struct xiic_i2c_platform_data - Platform data of the Xilinx I2C driver
+ * @num_devices:	Number of devices that shall be added when the driver
+ *			is probed.
+ * @devices:		The actuall devices to add.
+ *
+ * This purpose of this platform data struct is to be able to provide a number
+ * of devices that should be added to the I2C bus. The reason is that sometimes
+ * the I2C board info is not enough, a new PCI board can for instance be
+ * plugged into a standard PC, and the bus number might be unknown at
+ * early init time.
+ */
+struct xiic_i2c_platform_data {
+	u8				num_devices;
+	struct i2c_board_info const	*devices;
+};
+
+#endif /* _LINUX_I2C_XIIC_H */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index abec69b..b1ed1cd 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -32,14 +32,6 @@
 }
 
 extern struct nsproxy init_nsproxy;
-#define INIT_NSPROXY(nsproxy) {						\
-	.pid_ns		= &init_pid_ns,					\
-	.count		= ATOMIC_INIT(1),				\
-	.uts_ns		= &init_uts_ns,					\
-	.mnt_ns		= NULL,						\
-	INIT_NET_NS(net_ns)                                             \
-	INIT_IPC_NS(ipc_ns)						\
-}
 
 #define INIT_SIGHAND(sighand) {						\
 	.count		= ATOMIC_INIT(1), 				\
diff --git a/include/linux/input.h b/include/linux/input.h
index dc24eff..7ed2251 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -58,10 +58,10 @@
 
 #define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
 #define EVIOCGID		_IOR('E', 0x02, struct input_id)	/* get device ID */
-#define EVIOCGREP		_IOR('E', 0x03, int[2])			/* get repeat settings */
-#define EVIOCSREP		_IOW('E', 0x03, int[2])			/* set repeat settings */
-#define EVIOCGKEYCODE		_IOR('E', 0x04, int[2])			/* get keycode */
-#define EVIOCSKEYCODE		_IOW('E', 0x04, int[2])			/* set keycode */
+#define EVIOCGREP		_IOR('E', 0x03, unsigned int[2])	/* get repeat settings */
+#define EVIOCSREP		_IOW('E', 0x03, unsigned int[2])	/* set repeat settings */
+#define EVIOCGKEYCODE		_IOR('E', 0x04, unsigned int[2])	/* get keycode */
+#define EVIOCSKEYCODE		_IOW('E', 0x04, unsigned int[2])	/* set keycode */
 
 #define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
 #define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
@@ -1142,8 +1142,10 @@
 	unsigned int keycodemax;
 	unsigned int keycodesize;
 	void *keycode;
-	int (*setkeycode)(struct input_dev *dev, int scancode, int keycode);
-	int (*getkeycode)(struct input_dev *dev, int scancode, int *keycode);
+	int (*setkeycode)(struct input_dev *dev,
+			  unsigned int scancode, unsigned int keycode);
+	int (*getkeycode)(struct input_dev *dev,
+			  unsigned int scancode, unsigned int *keycode);
 
 	struct ff_device *ff;
 
@@ -1415,8 +1417,10 @@
 	dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis);
 }
 
-int input_get_keycode(struct input_dev *dev, int scancode, int *keycode);
-int input_set_keycode(struct input_dev *dev, int scancode, int keycode);
+int input_get_keycode(struct input_dev *dev,
+		      unsigned int scancode, unsigned int *keycode);
+int input_set_keycode(struct input_dev *dev,
+		      unsigned int scancode, unsigned int keycode);
 
 extern struct class input_class;
 
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index 1195a80..a0bb301 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -42,7 +42,7 @@
 	unsigned short ioprio;
 	unsigned short ioprio_changed;
 
-#ifdef CONFIG_BLK_CGROUP
+#if defined(CONFIG_BLK_CGROUP) || defined(CONFIG_BLK_CGROUP_MODULE)
 	unsigned short cgroup_changed;
 #endif
 
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index dda9841..71ab79d 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -34,22 +34,24 @@
  */
 #define IORESOURCE_BITS		0x000000ff	/* Bus-specific bits */
 
-#define IORESOURCE_TYPE_BITS	0x00000f00	/* Resource type */
+#define IORESOURCE_TYPE_BITS	0x00001f00	/* Resource type */
 #define IORESOURCE_IO		0x00000100
 #define IORESOURCE_MEM		0x00000200
 #define IORESOURCE_IRQ		0x00000400
 #define IORESOURCE_DMA		0x00000800
+#define IORESOURCE_BUS		0x00001000
 
-#define IORESOURCE_PREFETCH	0x00001000	/* No side effects */
-#define IORESOURCE_READONLY	0x00002000
-#define IORESOURCE_CACHEABLE	0x00004000
-#define IORESOURCE_RANGELENGTH	0x00008000
-#define IORESOURCE_SHADOWABLE	0x00010000
+#define IORESOURCE_PREFETCH	0x00002000	/* No side effects */
+#define IORESOURCE_READONLY	0x00004000
+#define IORESOURCE_CACHEABLE	0x00008000
+#define IORESOURCE_RANGELENGTH	0x00010000
+#define IORESOURCE_SHADOWABLE	0x00020000
 
-#define IORESOURCE_SIZEALIGN	0x00020000	/* size indicates alignment */
-#define IORESOURCE_STARTALIGN	0x00040000	/* start field is alignment */
+#define IORESOURCE_SIZEALIGN	0x00040000	/* size indicates alignment */
+#define IORESOURCE_STARTALIGN	0x00080000	/* start field is alignment */
 
 #define IORESOURCE_MEM_64	0x00100000
+#define IORESOURCE_WINDOW	0x00200000	/* forwarded by bridge */
 
 #define IORESOURCE_EXCLUSIVE	0x08000000	/* Userland may not map this resource */
 #define IORESOURCE_DISABLED	0x10000000
diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h
index 07baa38..5195298 100644
--- a/include/linux/ipc_namespace.h
+++ b/include/linux/ipc_namespace.h
@@ -62,11 +62,6 @@
 extern atomic_t nr_ipc_ns;
 
 extern spinlock_t mq_lock;
-#if defined(CONFIG_POSIX_MQUEUE) || defined(CONFIG_SYSVIPC)
-#define INIT_IPC_NS(ns)		.ns		= &init_ipc_ns,
-#else
-#define INIT_IPC_NS(ns)
-#endif
 
 #ifdef CONFIG_SYSVIPC
 extern int register_ipcns_notifier(struct ipc_namespace *);
diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h
index f7c9c75..4b48318 100644
--- a/include/linux/ipmi_smi.h
+++ b/include/linux/ipmi_smi.h
@@ -39,7 +39,6 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
-#include <linux/ipmi_smi.h>
 
 /* This files describes the interface for IPMI system management interface
    drivers to bind into the IPMI message handler. */
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index 384ca8b..facb27f 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -27,6 +27,7 @@
 #define KMOD_PATH_LEN 256
 
 #ifdef CONFIG_MODULES
+extern char modprobe_path[]; /* for sysctl */
 /* modprobe exit status on success, -ve on error.  Return value
  * usually useless though. */
 extern int __request_module(bool wait, const char *name, ...) \
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index 58ae8e00..3950d3c 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -106,7 +106,7 @@
 
 struct kobj_type {
 	void (*release)(struct kobject *kobj);
-	struct sysfs_ops *sysfs_ops;
+	const struct sysfs_ops *sysfs_ops;
 	struct attribute **default_attrs;
 };
 
@@ -118,9 +118,9 @@
 };
 
 struct kset_uevent_ops {
-	int (*filter)(struct kset *kset, struct kobject *kobj);
-	const char *(*name)(struct kset *kset, struct kobject *kobj);
-	int (*uevent)(struct kset *kset, struct kobject *kobj,
+	int (* const filter)(struct kset *kset, struct kobject *kobj);
+	const char *(* const name)(struct kset *kset, struct kobject *kobj);
+	int (* const uevent)(struct kset *kset, struct kobject *kobj,
 		      struct kobj_uevent_env *env);
 };
 
@@ -132,7 +132,7 @@
 			 const char *buf, size_t count);
 };
 
-extern struct sysfs_ops kobj_sysfs_ops;
+extern const struct sysfs_ops kobj_sysfs_ops;
 
 /**
  * struct kset - a set of kobjects of a specific type, belonging to a specific subsystem.
@@ -155,14 +155,14 @@
 	struct list_head list;
 	spinlock_t list_lock;
 	struct kobject kobj;
-	struct kset_uevent_ops *uevent_ops;
+	const struct kset_uevent_ops *uevent_ops;
 };
 
 extern void kset_init(struct kset *kset);
 extern int __must_check kset_register(struct kset *kset);
 extern void kset_unregister(struct kset *kset);
 extern struct kset * __must_check kset_create_and_add(const char *name,
-						struct kset_uevent_ops *u,
+						const struct kset_uevent_ops *u,
 						struct kobject *parent_kobj);
 
 static inline struct kset *to_kset(struct kobject *kobj)
diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
index 10206a8..a03977a9 100644
--- a/include/linux/lockdep.h
+++ b/include/linux/lockdep.h
@@ -12,6 +12,10 @@
 struct task_struct;
 struct lockdep_map;
 
+/* for sysctl */
+extern int prove_locking;
+extern int lock_stat;
+
 #ifdef CONFIG_LOCKDEP
 
 #include <linux/linkage.h>
diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h
index 3a2b2d9..de48d16 100644
--- a/include/linux/lru_cache.h
+++ b/include/linux/lru_cache.h
@@ -64,7 +64,7 @@
   usually the condition is softened to regions that _may_ have been target of
   in-flight WRITE IO, e.g. by only lazily clearing the on-disk write-intent
   bitmap, trading frequency of meta data transactions against amount of
-  (possibly unneccessary) resync traffic.
+  (possibly unnecessary) resync traffic.
 
   If we set a hard limit on the area that may be "hot" at any given time, we
   limit the amount of resync traffic needed for crash recovery.
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 1f9b119..44301c6 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -124,7 +124,6 @@
 	return false;
 }
 
-extern bool mem_cgroup_oom_called(struct task_struct *task);
 void mem_cgroup_update_file_mapped(struct page *page, int val);
 unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
 						gfp_t gfp_mask, int nid,
@@ -258,11 +257,6 @@
 	return true;
 }
 
-static inline bool mem_cgroup_oom_called(struct task_struct *task)
-{
-	return false;
-}
-
 static inline int
 mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg)
 {
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 3899395..e70f21b 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -971,7 +971,13 @@
 		*maxrss = hiwater_rss;
 }
 
+#if defined(SPLIT_RSS_COUNTING)
 void sync_mm_rss(struct task_struct *task, struct mm_struct *mm);
+#else
+static inline void sync_mm_rss(struct task_struct *task, struct mm_struct *mm)
+{
+}
+#endif
 
 /*
  * A callback you can register to apply pressure to ageable caches.
@@ -1459,5 +1465,7 @@
 extern atomic_long_t mce_bad_pages;
 extern int soft_offline_page(struct page *page, int flags);
 
+extern void dump_page(struct page *page);
+
 #endif /* __KERNEL__ */
 #endif /* _LINUX_MM_H */
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 048b462..b8bb9a6 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -203,7 +203,7 @@
 	NR_MM_COUNTERS
 };
 
-#if USE_SPLIT_PTLOCKS
+#if USE_SPLIT_PTLOCKS && defined(CONFIG_MMU)
 #define SPLIT_RSS_COUNTING
 struct mm_rss_stat {
 	atomic_long_t count[NR_MM_COUNTERS];
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index bc209d8..cf9e458 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -342,7 +342,7 @@
 	 * prev_priority holds the scanning priority for this zone.  It is
 	 * defined as the scanning priority at which we achieved our reclaim
 	 * target at the previous try_to_free_pages() or balance_pgdat()
-	 * invokation.
+	 * invocation.
 	 *
 	 * We use prev_priority as a measure of how much stress page reclaim is
 	 * under - it drives the swappiness decision: whether to unmap mapped
diff --git a/include/linux/module.h b/include/linux/module.h
index dd618eb..5e869ff 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -175,6 +175,7 @@
 
 #ifdef CONFIG_MODULES
 
+extern int modules_disabled; /* for sysctl */
 /* Get/put a kernel symbol (calls must be symmetric) */
 void *__symbol_get(const char *symbol);
 void *__symbol_get_gpl(const char *symbol);
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index ce38f1c..34066e6 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -15,6 +15,7 @@
 #define MSDOS_DPB_BITS	4		/* log2(MSDOS_DPB) */
 #define MSDOS_DPS	(SECTOR_SIZE / sizeof(struct msdos_dir_entry))
 #define MSDOS_DPS_BITS	4		/* log2(MSDOS_DPS) */
+#define MSDOS_LONGNAME	256		/* maximum name length */
 #define CF_LE_W(v)	le16_to_cpu(v)
 #define CF_LE_L(v)	le32_to_cpu(v)
 #define CT_LE_W(v)	cpu_to_le16(v)
@@ -47,8 +48,8 @@
 #define DELETED_FLAG	0xe5	/* marks file as deleted when in name[0] */
 #define IS_FREE(n)	(!*(n) || *(n) == DELETED_FLAG)
 
+#define FAT_LFN_LEN	255	/* maximum long name length */
 #define MSDOS_NAME	11	/* maximum name length */
-#define MSDOS_LONGNAME	256	/* maximum name length */
 #define MSDOS_SLOTS	21	/* max # of slots for short and long names */
 #define MSDOS_DOT	".          "	/* ".", padded to MSDOS_NAME chars */
 #define MSDOS_DOTDOT	"..         "	/* "..", padded to MSDOS_NAME chars */
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index c4fa64b..dba35e4 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -483,7 +483,7 @@
 			type *name = kmalloc(sizeof(*name), gfp_flags)
 #define NODEMASK_FREE(m)			kfree(m)
 #else
-#define NODEMASK_ALLOC(type, name, gfp_flags)	type _name, *name = &_name
+#define NODEMASK_ALLOC(type, name, gfp_flags)	type _##name, *name = &_##name
 #define NODEMASK_FREE(m)			do {} while (0)
 #endif
 
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index b0e4eb1..30b0813 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -118,6 +118,8 @@
 #include <linux/swap.h>
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
+extern unsigned short swap_cgroup_cmpxchg(swp_entry_t ent,
+					unsigned short old, unsigned short new);
 extern unsigned short swap_cgroup_record(swp_entry_t ent, unsigned short id);
 extern unsigned short lookup_swap_cgroup(swp_entry_t ent);
 extern int swap_cgroup_swapon(int type, unsigned long max_pages);
diff --git a/include/linux/pci-dma.h b/include/linux/pci-dma.h
new file mode 100644
index 0000000..549a041
--- /dev/null
+++ b/include/linux/pci-dma.h
@@ -0,0 +1,11 @@
+#ifndef _LINUX_PCI_DMA_H
+#define _LINUX_PCI_DMA_H
+
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)   DEFINE_DMA_UNMAP_LEN(LEN_NAME);
+#define pci_unmap_addr             dma_unmap_addr
+#define pci_unmap_addr_set         dma_unmap_addr_set
+#define pci_unmap_len              dma_unmap_len
+#define pci_unmap_len_set          dma_unmap_len_set
+
+#endif
diff --git a/include/linux/pci.h b/include/linux/pci.h
index cd5809a..a788fa1 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -769,8 +769,6 @@
 void pci_clear_mwi(struct pci_dev *dev);
 void pci_intx(struct pci_dev *dev, int enable);
 void pci_msi_off(struct pci_dev *dev);
-int pci_set_dma_mask(struct pci_dev *dev, u64 mask);
-int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask);
 int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size);
 int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask);
 int pcix_get_max_mmrbc(struct pci_dev *dev);
@@ -904,6 +902,7 @@
 		      unsigned int command_bits, bool change_bridge);
 /* kmem_cache style wrapper around pci_alloc_consistent() */
 
+#include <linux/pci-dma.h>
 #include <linux/dmapool.h>
 
 #define	pci_pool dma_pool
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 7b18b4fd5..6f8cd7d 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -487,9 +487,8 @@
 			struct hrtimer	hrtimer;
 		};
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-		union { /* breakpoint */
-			struct arch_hw_breakpoint	info;
-		};
+		/* breakpoint */
+		struct arch_hw_breakpoint	info;
 #endif
 	};
 	atomic64_t			prev_count;
@@ -802,6 +801,13 @@
 	struct perf_raw_record		*raw;
 };
 
+static inline
+void perf_sample_data_init(struct perf_sample_data *data, u64 addr)
+{
+	data->addr = addr;
+	data->raw  = NULL;
+}
+
 extern void perf_output_sample(struct perf_output_handle *handle,
 			       struct perf_event_header *header,
 			       struct perf_sample_data *data,
@@ -858,6 +864,21 @@
 extern int sysctl_perf_event_mlock;
 extern int sysctl_perf_event_sample_rate;
 
+static inline bool perf_paranoid_tracepoint_raw(void)
+{
+	return sysctl_perf_event_paranoid > -1;
+}
+
+static inline bool perf_paranoid_cpu(void)
+{
+	return sysctl_perf_event_paranoid > 0;
+}
+
+static inline bool perf_paranoid_kernel(void)
+{
+	return sysctl_perf_event_paranoid > 1;
+}
+
 extern void perf_event_init(void);
 extern void perf_tp_event(int event_id, u64 addr, u64 count, void *record, int entry_size);
 extern void perf_bp_event(struct perf_event *event, void *data);
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 71ff887..212da17 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -21,7 +21,7 @@
 	u32		num_resources;
 	struct resource	* resource;
 
-	struct platform_device_id	*id_entry;
+	const struct platform_device_id	*id_entry;
 
 	/* arch specific additions */
 	struct pdev_archdata	archdata;
@@ -62,7 +62,7 @@
 	int (*suspend)(struct platform_device *, pm_message_t state);
 	int (*resume)(struct platform_device *);
 	struct device_driver driver;
-	struct platform_device_id *id_table;
+	const struct platform_device_id *id_table;
 };
 
 extern int platform_driver_register(struct platform_driver *);
@@ -77,6 +77,11 @@
 #define platform_get_drvdata(_dev)	dev_get_drvdata(&(_dev)->dev)
 #define platform_set_drvdata(_dev,data)	dev_set_drvdata(&(_dev)->dev, (data))
 
+extern struct platform_device *platform_create_bundle(struct platform_driver *driver,
+					int (*probe)(struct platform_device *),
+					struct resource *res, unsigned int n_res,
+					const void *data, size_t size);
+
 /* early platform driver interface */
 struct early_platform_driver {
 	const char *class_str;
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 6673743..600cc1f 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -10,8 +10,10 @@
 #include <linux/wait.h>
 #include <linux/string.h>
 #include <linux/fs.h>
+#include <linux/sysctl.h>
 #include <asm/uaccess.h>
 
+extern struct ctl_table epoll_table[]; /* for sysctl */
 /* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
    additional memory. */
 #define MAX_STACK_ALLOC 832
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index b5d096d..ebd2b8f 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -82,6 +82,7 @@
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_ONLINE,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MAX,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN,
 	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index c5eab89..e1fb607 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -264,6 +264,9 @@
 static inline void user_disable_single_step(struct task_struct *task)
 {
 }
+#else
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
 #endif	/* arch_has_single_step */
 
 #ifndef arch_has_block_step
@@ -291,6 +294,8 @@
 {
 	BUG();			/* This can never be called.  */
 }
+#else
+extern void user_enable_block_step(struct task_struct *);
 #endif	/* arch_has_block_step */
 
 #ifdef ARCH_HAS_USER_SINGLE_STEP_INFO
diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h
index 9c29541..5210a5c 100644
--- a/include/linux/rbtree.h
+++ b/include/linux/rbtree.h
@@ -25,10 +25,10 @@
 
   Some example of insert and search follows here. The search is a plain
   normal search over an ordered tree. The insert instead must be implemented
-  int two steps: as first thing the code must insert the element in
-  order as a red leaf in the tree, then the support library function
-  rb_insert_color() must be called. Such function will do the
-  not trivial work to rebalance the rbtree if necessary.
+  in two steps: First, the code must insert the element in order as a red leaf
+  in the tree, and then the support library function rb_insert_color() must
+  be called. Such function will do the not trivial work to rebalance the
+  rbtree, if necessary.
 
 -----------------------------------------------------------------------
 static inline struct page * rb_search_page_cache(struct inode * inode,
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index c843736..3024050 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -41,6 +41,10 @@
 #include <linux/lockdep.h>
 #include <linux/completion.h>
 
+#ifdef CONFIG_RCU_TORTURE_TEST
+extern int rcutorture_runnable; /* for sysctl */
+#endif /* #ifdef CONFIG_RCU_TORTURE_TEST */
+
 /**
  * struct rcu_head - callback structure for use with RCU
  * @next: next update requests in a list
@@ -97,6 +101,11 @@
 # define rcu_read_release_sched() \
 		lock_release(&rcu_sched_lock_map, 1, _THIS_IP_)
 
+static inline int debug_lockdep_rcu_enabled(void)
+{
+	return likely(rcu_scheduler_active && debug_locks);
+}
+
 /**
  * rcu_read_lock_held - might we be in RCU read-side critical section?
  *
@@ -104,12 +113,14 @@
  * an RCU read-side critical section.  In absence of CONFIG_PROVE_LOCKING,
  * this assumes we are in an RCU read-side critical section unless it can
  * prove otherwise.
+ *
+ * Check rcu_scheduler_active to prevent false positives during boot.
  */
 static inline int rcu_read_lock_held(void)
 {
-	if (debug_locks)
-		return lock_is_held(&rcu_lock_map);
-	return 1;
+	if (!debug_lockdep_rcu_enabled())
+		return 1;
+	return lock_is_held(&rcu_lock_map);
 }
 
 /**
@@ -119,12 +130,14 @@
  * an RCU-bh read-side critical section.  In absence of CONFIG_PROVE_LOCKING,
  * this assumes we are in an RCU-bh read-side critical section unless it can
  * prove otherwise.
+ *
+ * Check rcu_scheduler_active to prevent false positives during boot.
  */
 static inline int rcu_read_lock_bh_held(void)
 {
-	if (debug_locks)
-		return lock_is_held(&rcu_bh_lock_map);
-	return 1;
+	if (!debug_lockdep_rcu_enabled())
+		return 1;
+	return lock_is_held(&rcu_bh_lock_map);
 }
 
 /**
@@ -135,15 +148,26 @@
  * this assumes we are in an RCU-sched read-side critical section unless it
  * can prove otherwise.  Note that disabling of preemption (including
  * disabling irqs) counts as an RCU-sched read-side critical section.
+ *
+ * Check rcu_scheduler_active to prevent false positives during boot.
  */
+#ifdef CONFIG_PREEMPT
 static inline int rcu_read_lock_sched_held(void)
 {
 	int lockdep_opinion = 0;
 
+	if (!debug_lockdep_rcu_enabled())
+		return 1;
 	if (debug_locks)
 		lockdep_opinion = lock_is_held(&rcu_sched_lock_map);
-	return lockdep_opinion || preempt_count() != 0 || !rcu_scheduler_active;
+	return lockdep_opinion || preempt_count() != 0;
 }
+#else /* #ifdef CONFIG_PREEMPT */
+static inline int rcu_read_lock_sched_held(void)
+{
+	return 1;
+}
+#endif /* #else #ifdef CONFIG_PREEMPT */
 
 #else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
 
@@ -164,10 +188,17 @@
 	return 1;
 }
 
+#ifdef CONFIG_PREEMPT
 static inline int rcu_read_lock_sched_held(void)
 {
-	return preempt_count() != 0 || !rcu_scheduler_active;
+	return !rcu_scheduler_active || preempt_count() != 0;
 }
+#else /* #ifdef CONFIG_PREEMPT */
+static inline int rcu_read_lock_sched_held(void)
+{
+	return 1;
+}
+#endif /* #else #ifdef CONFIG_PREEMPT */
 
 #endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
 
@@ -184,7 +215,7 @@
  */
 #define rcu_dereference_check(p, c) \
 	({ \
-		if (debug_locks && !(c)) \
+		if (debug_lockdep_rcu_enabled() && !(c)) \
 			lockdep_rcu_dereference(__FILE__, __LINE__); \
 		rcu_dereference_raw(p); \
 	})
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index 988e55f..3005d5a 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -64,6 +64,7 @@
 extern void kernel_halt(void);
 extern void kernel_power_off(void);
 
+extern int C_A_D; /* for sysctl */
 void ctrl_alt_del(void);
 
 #define POWEROFF_CMD_PATH_LEN	256
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 97059d0..4f82326 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -29,7 +29,7 @@
 /**
  * enum rfkill_type - type of rfkill switch.
  *
- * @RFKILL_TYPE_ALL: toggles all switches (userspace only)
+ * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
  * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
  * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
  * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index 60f88a7..14dbc83 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -238,6 +238,12 @@
 	return (!(year % 4) && (year % 100)) || !(year % 400);
 }
 
+#ifdef CONFIG_RTC_HCTOSYS
+extern int rtc_hctosys_ret;
+#else
+#define rtc_hctosys_ret -ENODEV
+#endif
+
 #endif /* __KERNEL__ */
 
 #endif /* _LINUX_RTC_H_ */
diff --git a/include/linux/rtmutex.h b/include/linux/rtmutex.h
index 281d8fd..8d522ff 100644
--- a/include/linux/rtmutex.h
+++ b/include/linux/rtmutex.h
@@ -16,6 +16,8 @@
 #include <linux/plist.h>
 #include <linux/spinlock_types.h>
 
+extern int max_lock_depth; /* for sysctl */
+
 /**
  * The rt_mutex structure
  *
diff --git a/include/linux/rwlock.h b/include/linux/rwlock.h
index 71e0b00..bc2994e 100644
--- a/include/linux/rwlock.h
+++ b/include/linux/rwlock.h
@@ -29,25 +29,25 @@
 #endif
 
 #ifdef CONFIG_DEBUG_SPINLOCK
- extern void do_raw_read_lock(rwlock_t *lock);
+ extern void do_raw_read_lock(rwlock_t *lock) __acquires(lock);
 #define do_raw_read_lock_flags(lock, flags) do_raw_read_lock(lock)
  extern int do_raw_read_trylock(rwlock_t *lock);
- extern void do_raw_read_unlock(rwlock_t *lock);
- extern void do_raw_write_lock(rwlock_t *lock);
+ extern void do_raw_read_unlock(rwlock_t *lock) __releases(lock);
+ extern void do_raw_write_lock(rwlock_t *lock) __acquires(lock);
 #define do_raw_write_lock_flags(lock, flags) do_raw_write_lock(lock)
  extern int do_raw_write_trylock(rwlock_t *lock);
- extern void do_raw_write_unlock(rwlock_t *lock);
+ extern void do_raw_write_unlock(rwlock_t *lock) __releases(lock);
 #else
-# define do_raw_read_lock(rwlock)	arch_read_lock(&(rwlock)->raw_lock)
+# define do_raw_read_lock(rwlock)	do {__acquire(lock); arch_read_lock(&(rwlock)->raw_lock); } while (0)
 # define do_raw_read_lock_flags(lock, flags) \
-		arch_read_lock_flags(&(lock)->raw_lock, *(flags))
+		do {__acquire(lock); arch_read_lock_flags(&(lock)->raw_lock, *(flags)); } while (0)
 # define do_raw_read_trylock(rwlock)	arch_read_trylock(&(rwlock)->raw_lock)
-# define do_raw_read_unlock(rwlock)	arch_read_unlock(&(rwlock)->raw_lock)
-# define do_raw_write_lock(rwlock)	arch_write_lock(&(rwlock)->raw_lock)
+# define do_raw_read_unlock(rwlock)	do {arch_read_unlock(&(rwlock)->raw_lock); __release(lock); } while (0)
+# define do_raw_write_lock(rwlock)	do {__acquire(lock); arch_write_lock(&(rwlock)->raw_lock); } while (0)
 # define do_raw_write_lock_flags(lock, flags) \
-		arch_write_lock_flags(&(lock)->raw_lock, *(flags))
+		do {__acquire(lock); arch_write_lock_flags(&(lock)->raw_lock, *(flags)); } while (0)
 # define do_raw_write_trylock(rwlock)	arch_write_trylock(&(rwlock)->raw_lock)
-# define do_raw_write_unlock(rwlock)	arch_write_unlock(&(rwlock)->raw_lock)
+# define do_raw_write_unlock(rwlock)	do {arch_write_unlock(&(rwlock)->raw_lock); __release(lock); } while (0)
 #endif
 
 #define read_can_lock(rwlock)		arch_read_can_lock(&(rwlock)->raw_lock)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 46c6f8d..dad7f66 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -258,6 +258,10 @@
 
 struct task_struct;
 
+#ifdef CONFIG_PROVE_RCU
+extern int lockdep_tasklist_lock_is_held(void);
+#endif /* #ifdef CONFIG_PROVE_RCU */
+
 extern void sched_init(void);
 extern void sched_init_smp(void);
 extern asmlinkage void schedule_tail(struct task_struct *prev);
@@ -1473,7 +1477,7 @@
 
 	struct list_head	*scm_work_list;
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	/* Index of current stored adress in ret_stack */
+	/* Index of current stored address in ret_stack */
 	int curr_ret_stack;
 	/* Stack of return addresses for return function tracing */
 	struct ftrace_ret_stack	*ret_stack;
@@ -2391,9 +2395,7 @@
 
 static inline void thread_group_cputime_init(struct signal_struct *sig)
 {
-	sig->cputimer.cputime = INIT_CPUTIME;
 	spin_lock_init(&sig->cputimer.lock);
-	sig->cputimer.running = 0;
 }
 
 static inline void thread_group_cputime_free(struct signal_struct *sig)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 8c3dd36..78dd1e7 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -491,9 +491,13 @@
 {
 	struct uart_state *state = uport->state;
 	struct tty_port *port = &state->port;
+	struct tty_ldisc *ld = tty_ldisc_ref(port->tty);
+	struct timespec ts;
+
+	if (ld && ld->ops->dcd_change)
+		getnstimeofday(&ts);
 
 	uport->icount.dcd++;
-
 #ifdef CONFIG_HARD_PPS
 	if ((uport->flags & UPF_HARDPPS_CD) && status)
 		hardpps();
@@ -505,6 +509,11 @@
 		else if (port->tty)
 			tty_hangup(port->tty);
 	}
+
+	if (ld && ld->ops->dcd_change)
+		ld->ops->dcd_change(port->tty, status, &ts);
+	if (ld)
+		tty_ldisc_deref(ld);
 }
 
 /**
diff --git a/include/linux/signal.h b/include/linux/signal.h
index ab9272c..fcd2b14 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -7,6 +7,8 @@
 #ifdef __KERNEL__
 #include <linux/list.h>
 
+/* for sysctl */
+extern int print_fatal_signals;
 /*
  * Real Time signals may be queued.
  */
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index e28f5a0..4435d10 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -225,6 +225,8 @@
 	LINUX_MIB_SACKSHIFTED,
 	LINUX_MIB_SACKMERGED,
 	LINUX_MIB_SACKSHIFTFALLBACK,
+	LINUX_MIB_TCPBACKLOGDROP,
+	LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */
 	__LINUX_MIB_MAX
 };
 
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index 51948eb..b4ae570 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -12,7 +12,7 @@
 };
 
 struct ads7846_platform_data {
-	u16	model;			/* 7843, 7845, 7846. */
+	u16	model;			/* 7843, 7845, 7846, 7873. */
 	u16	vref_delay_usecs;	/* 0 for external vref; etc */
 	u16	vref_mv;		/* external vref value, milliVolts */
 	bool	keep_vref_on;		/* set to keep vref on for differential
@@ -53,5 +53,6 @@
 	int	(*filter)	(void *filter_data, int data_idx, int *val);
 	void	(*filter_cleanup)(void *filter_data);
 	void	(*wait_for_sync)(void);
+	bool	wakeup;
 };
 
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 8608821..89fac6a 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -128,19 +128,21 @@
 #define raw_spin_unlock_wait(lock)	arch_spin_unlock_wait(&(lock)->raw_lock)
 
 #ifdef CONFIG_DEBUG_SPINLOCK
- extern void do_raw_spin_lock(raw_spinlock_t *lock);
+ extern void do_raw_spin_lock(raw_spinlock_t *lock) __acquires(lock);
 #define do_raw_spin_lock_flags(lock, flags) do_raw_spin_lock(lock)
  extern int do_raw_spin_trylock(raw_spinlock_t *lock);
- extern void do_raw_spin_unlock(raw_spinlock_t *lock);
+ extern void do_raw_spin_unlock(raw_spinlock_t *lock) __releases(lock);
 #else
-static inline void do_raw_spin_lock(raw_spinlock_t *lock)
+static inline void do_raw_spin_lock(raw_spinlock_t *lock) __acquires(lock)
 {
+	__acquire(lock);
 	arch_spin_lock(&lock->raw_lock);
 }
 
 static inline void
-do_raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long *flags)
+do_raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long *flags) __acquires(lock)
 {
+	__acquire(lock);
 	arch_spin_lock_flags(&lock->raw_lock, *flags);
 }
 
@@ -149,9 +151,10 @@
 	return arch_spin_trylock(&(lock)->raw_lock);
 }
 
-static inline void do_raw_spin_unlock(raw_spinlock_t *lock)
+static inline void do_raw_spin_unlock(raw_spinlock_t *lock) __releases(lock)
 {
 	arch_spin_unlock(&lock->raw_lock);
+	__release(lock);
 }
 #endif
 
diff --git a/include/linux/swap.h b/include/linux/swap.h
index a2602a8..1f59d93 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -355,6 +355,7 @@
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR
 extern void
 mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout);
+extern int mem_cgroup_count_swap_user(swp_entry_t ent, struct page **pagep);
 #else
 static inline void
 mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout)
@@ -485,6 +486,14 @@
 {
 }
 
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+static inline int
+mem_cgroup_count_swap_user(swp_entry_t ent, struct page **pagep)
+{
+	return 0;
+}
+#endif
+
 #endif /* CONFIG_SWAP */
 #endif /* __KERNEL__*/
 #endif /* _LINUX_SWAP_H */
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 8126f23..44f2ad0 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -23,6 +23,7 @@
 struct linux_dirent;
 struct linux_dirent64;
 struct list_head;
+struct mmap_arg_struct;
 struct msgbuf;
 struct msghdr;
 struct mmsghdr;
@@ -30,10 +31,13 @@
 struct new_utsname;
 struct nfsctl_arg;
 struct __old_kernel_stat;
+struct oldold_utsname;
+struct old_utsname;
 struct pollfd;
 struct rlimit;
 struct rusage;
 struct sched_param;
+struct sel_arg_struct;
 struct semaphore;
 struct sembuf;
 struct shmid_ds;
@@ -638,6 +642,7 @@
 				long timeout);
 asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 			fd_set __user *exp, struct timeval __user *tvp);
+asmlinkage long sys_old_select(struct sel_arg_struct __user *arg);
 asmlinkage long sys_epoll_create(int size);
 asmlinkage long sys_epoll_create1(int flags);
 asmlinkage long sys_epoll_ctl(int epfd, int op, int fd,
@@ -652,6 +657,8 @@
 asmlinkage long sys_sethostname(char __user *name, int len);
 asmlinkage long sys_setdomainname(char __user *name, int len);
 asmlinkage long sys_newuname(struct new_utsname __user *name);
+asmlinkage long sys_uname(struct old_utsname __user *);
+asmlinkage long sys_olduname(struct oldold_utsname __user *);
 
 asmlinkage long sys_getrlimit(unsigned int resource,
 				struct rlimit __user *rlim);
@@ -681,6 +688,8 @@
 asmlinkage long sys_shmget(key_t key, size_t size, int flag);
 asmlinkage long sys_shmdt(char __user *shmaddr);
 asmlinkage long sys_shmctl(int shmid, int cmd, struct shmid_ds __user *buf);
+asmlinkage long sys_ipc(unsigned int call, int first, int second,
+		unsigned long third, void __user *ptr, long fifth);
 
 asmlinkage long sys_mq_open(const char __user *name, int oflag, mode_t mode, struct mq_attr __user *attr);
 asmlinkage long sys_mq_unlink(const char __user *name);
@@ -836,4 +845,6 @@
 asmlinkage long sys_mmap_pgoff(unsigned long addr, unsigned long len,
 			unsigned long prot, unsigned long flags,
 			unsigned long fd, unsigned long pgoff);
+asmlinkage long sys_old_mmap(struct mmap_arg_struct __user *arg);
+
 #endif
diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h
index f395bb3..1154c29 100644
--- a/include/linux/sysdev.h
+++ b/include/linux/sysdev.h
@@ -27,10 +27,12 @@
 
 
 struct sys_device;
+struct sysdev_class_attribute;
 
 struct sysdev_class {
 	const char *name;
 	struct list_head	drivers;
+	struct sysdev_class_attribute **attrs;
 
 	/* Default operations for these types of devices */
 	int	(*shutdown)(struct sys_device *);
@@ -41,8 +43,10 @@
 
 struct sysdev_class_attribute {
 	struct attribute attr;
-	ssize_t (*show)(struct sysdev_class *, char *);
-	ssize_t (*store)(struct sysdev_class *, const char *, size_t);
+	ssize_t (*show)(struct sysdev_class *, struct sysdev_class_attribute *,
+			char *);
+	ssize_t (*store)(struct sysdev_class *, struct sysdev_class_attribute *,
+			 const char *, size_t);
 };
 
 #define _SYSDEV_CLASS_ATTR(_name,_mode,_show,_store) 		\
@@ -119,6 +123,19 @@
 extern int sysdev_create_file(struct sys_device *, struct sysdev_attribute *);
 extern void sysdev_remove_file(struct sys_device *, struct sysdev_attribute *);
 
+/* Create/remove NULL terminated attribute list */
+static inline int
+sysdev_create_files(struct sys_device *d, struct sysdev_attribute **a)
+{
+	return sysfs_create_files(&d->kobj, (const struct attribute **)a);
+}
+
+static inline void
+sysdev_remove_files(struct sys_device *d, struct sysdev_attribute **a)
+{
+	return sysfs_remove_files(&d->kobj, (const struct attribute **)a);
+}
+
 struct sysdev_ext_attribute {
 	struct sysdev_attribute attr;
 	void *var;
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index cfa8308..f0496b3 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -15,6 +15,7 @@
 #include <linux/compiler.h>
 #include <linux/errno.h>
 #include <linux/list.h>
+#include <linux/lockdep.h>
 #include <asm/atomic.h>
 
 struct kobject;
@@ -29,8 +30,33 @@
 	const char		*name;
 	struct module		*owner;
 	mode_t			mode;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lock_class_key	*key;
+	struct lock_class_key	skey;
+#endif
 };
 
+/**
+ *	sysfs_attr_init - initialize a dynamically allocated sysfs attribute
+ *	@attr: struct attribute to initialize
+ *
+ *	Initialize a dynamically allocated struct attribute so we can
+ *	make lockdep happy.  This is a new requirement for attributes
+ *	and initially this is only needed when lockdep is enabled.
+ *	Lockdep gives a nice error when your attribute is added to
+ *	sysfs if you don't have this.
+ */
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+#define sysfs_attr_init(attr)				\
+do {							\
+	static struct lock_class_key __key;		\
+							\
+	(attr)->key = &__key;				\
+} while(0)
+#else
+#define sysfs_attr_init(attr) do {} while(0)
+#endif
+
 struct attribute_group {
 	const char		*name;
 	mode_t			(*is_visible)(struct kobject *,
@@ -74,6 +100,18 @@
 		    struct vm_area_struct *vma);
 };
 
+/**
+ *	sysfs_bin_attr_init - initialize a dynamically allocated bin_attribute
+ *	@attr: struct bin_attribute to initialize
+ *
+ *	Initialize a dynamically allocated struct bin_attribute so we
+ *	can make lockdep happy.  This is a new requirement for
+ *	attributes and initially this is only needed when lockdep is
+ *	enabled.  Lockdep gives a nice error when your attribute is
+ *	added to sysfs if you don't have this.
+ */
+#define sysfs_bin_attr_init(bin_attr) sysfs_attr_init(&(bin_attr)->attr)
+
 struct sysfs_ops {
 	ssize_t	(*show)(struct kobject *, struct attribute *,char *);
 	ssize_t	(*store)(struct kobject *,struct attribute *,const char *, size_t);
@@ -94,9 +132,12 @@
 
 int __must_check sysfs_create_file(struct kobject *kobj,
 				   const struct attribute *attr);
+int __must_check sysfs_create_files(struct kobject *kobj,
+				   const struct attribute **attr);
 int __must_check sysfs_chmod_file(struct kobject *kobj, struct attribute *attr,
 				  mode_t mode);
 void sysfs_remove_file(struct kobject *kobj, const struct attribute *attr);
+void sysfs_remove_files(struct kobject *kobj, const struct attribute **attr);
 
 int __must_check sysfs_create_bin_file(struct kobject *kobj,
 				       const struct bin_attribute *attr);
@@ -110,6 +151,9 @@
 					  const char *name);
 void sysfs_remove_link(struct kobject *kobj, const char *name);
 
+int sysfs_rename_link(struct kobject *kobj, struct kobject *target,
+			const char *old_name, const char *new_name);
+
 int __must_check sysfs_create_group(struct kobject *kobj,
 				    const struct attribute_group *grp);
 int sysfs_update_group(struct kobject *kobj,
@@ -164,6 +208,12 @@
 	return 0;
 }
 
+static inline int sysfs_create_files(struct kobject *kobj,
+				    const struct attribute **attr)
+{
+	return 0;
+}
+
 static inline int sysfs_chmod_file(struct kobject *kobj,
 				   struct attribute *attr, mode_t mode)
 {
@@ -175,6 +225,11 @@
 {
 }
 
+static inline void sysfs_remove_files(struct kobject *kobj,
+				     const struct attribute **attr)
+{
+}
+
 static inline int sysfs_create_bin_file(struct kobject *kobj,
 					const struct bin_attribute *attr)
 {
@@ -203,6 +258,12 @@
 {
 }
 
+static inline int sysfs_rename_link(struct kobject *k, struct kobject *t,
+				    const char *old_name, const char *new_name)
+{
+	return 0;
+}
+
 static inline int sysfs_create_group(struct kobject *kobj,
 				     const struct attribute_group *grp)
 {
diff --git a/include/linux/taskstats_kern.h b/include/linux/taskstats_kern.h
index 3398f45..b6523c1 100644
--- a/include/linux/taskstats_kern.h
+++ b/include/linux/taskstats_kern.h
@@ -14,11 +14,6 @@
 extern struct kmem_cache *taskstats_cache;
 extern struct mutex taskstats_exit_mutex;
 
-static inline void taskstats_tgid_init(struct signal_struct *sig)
-{
-	sig->stats = NULL;
-}
-
 static inline void taskstats_tgid_free(struct signal_struct *sig)
 {
 	if (sig->stats)
@@ -30,8 +25,6 @@
 #else
 static inline void taskstats_exit(struct task_struct *tsk, int group_dead)
 {}
-static inline void taskstats_tgid_init(struct signal_struct *sig)
-{}
 static inline void taskstats_tgid_free(struct signal_struct *sig)
 {}
 static inline void taskstats_init_early(void)
diff --git a/include/linux/tty.h b/include/linux/tty.h
index d96e588..568369a 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -514,6 +514,7 @@
 
 /* n_tty.c */
 extern struct tty_ldisc_ops tty_ldisc_N_TTY;
+extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops);
 
 /* tty_audit.c */
 #ifdef CONFIG_AUDIT
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 0c4ee9b..526d66f 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -99,6 +99,12 @@
  *	cease I/O to the tty driver. Can sleep. The driver should
  *	seek to perform this action quickly but should wait until
  *	any pending driver I/O is completed.
+ *
+ * void (*dcd_change)(struct tty_struct *tty, unsigned int status,
+ * 			struct timespec *ts)
+ *
+ *	Tells the discipline that the DCD pin has changed its status and
+ *	the relative timestamp. Pointer ts can be NULL.
  */
 
 #include <linux/fs.h>
@@ -136,6 +142,8 @@
 	void	(*receive_buf)(struct tty_struct *, const unsigned char *cp,
 			       char *fp, int count);
 	void	(*write_wakeup)(struct tty_struct *);
+	void	(*dcd_change)(struct tty_struct *, unsigned int,
+				struct timespec *);
 
 	struct  module *owner;
 	
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 3492abf8..8c9f053 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -512,9 +512,9 @@
 extern void usb_put_dev(struct usb_device *dev);
 
 /* USB device locking */
-#define usb_lock_device(udev)		down(&(udev)->dev.sem)
-#define usb_unlock_device(udev)		up(&(udev)->dev.sem)
-#define usb_trylock_device(udev)	down_trylock(&(udev)->dev.sem)
+#define usb_lock_device(udev)		device_lock(&(udev)->dev)
+#define usb_unlock_device(udev)		device_unlock(&(udev)->dev)
+#define usb_trylock_device(udev)	device_trylock(&(udev)->dev)
 extern int usb_lock_device_for_reset(struct usb_device *udev,
 				     const struct usb_interface *iface);
 
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index 6bb2936..4d3e450 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -269,8 +269,8 @@
 	__u8 bLength;
 	__u8 bDescriptorType;
 	__u8 bDescriptorSubtype;
-	__u8 bSubslotSize;
 	__u8 bFormatType;
+	__u8 bSubslotSize;
 	__u8 bBitResolution;
 	__u8 bHeaderLength;
 	__u8 bControlSize;
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index f508c65..40d1709 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -98,6 +98,7 @@
 	void *priv;
 };
 
+#define dev_to_virtio(dev) container_of(dev, struct virtio_device, dev)
 int register_virtio_device(struct virtio_device *dev);
 void unregister_virtio_device(struct virtio_device *dev);
 
diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h
index 3322750..5cf1176 100644
--- a/include/linux/virtio_9p.h
+++ b/include/linux/virtio_9p.h
@@ -5,4 +5,16 @@
 #include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
 
+/* The feature bitmap for virtio 9P */
+
+/* The mount point is specified in a config variable */
+#define VIRTIO_9P_MOUNT_TAG 0
+
+struct virtio_9p_config {
+	/* length of the tag name */
+	__u16 tag_len;
+	/* non-NULL terminated tag name */
+	__u8 tag[0];
+} __attribute__((packed));
+
 #endif /* _LINUX_VIRTIO_9P_H */
diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h
index f456534..fd88226 100644
--- a/include/math-emu/op-common.h
+++ b/include/math-emu/op-common.h
@@ -29,7 +29,7 @@
   _FP_FRAC_DECL_##wc(X)
 
 /*
- * Finish truely unpacking a native fp value by classifying the kind
+ * Finish truly unpacking a native fp value by classifying the kind
  * of fp value and normalizing both the exponent and the fraction.
  */
 
diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h
index d863e5e8..4314a5f 100644
--- a/include/media/davinci/vpfe_capture.h
+++ b/include/media/davinci/vpfe_capture.h
@@ -165,7 +165,7 @@
 	u8 started;
 	/*
 	 * offset where second field starts from the starting of the
-	 * buffer for field seperated YCbCr formats
+	 * buffer for field separated YCbCr formats
 	 */
 	u32 field_off;
 };
diff --git a/include/net/9p/client.h b/include/net/9p/client.h
index 52e1fff..f076dfa 100644
--- a/include/net/9p/client.h
+++ b/include/net/9p/client.h
@@ -32,13 +32,13 @@
 /** enum p9_proto_versions - 9P protocol versions
  * @p9_proto_legacy: 9P Legacy mode, pre-9P2000.u
  * @p9_proto_2000u: 9P2000.u extension
- * @p9_proto_2010L: 9P2010.L extension
+ * @p9_proto_2000L: 9P2000.L extension
  */
 
 enum p9_proto_versions{
 	p9_proto_legacy = 0,
 	p9_proto_2000u = 1,
-	p9_proto_2010L = 2,
+	p9_proto_2000L = 2,
 };
 
 
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 4a808de..68f67836 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -37,6 +37,24 @@
 #define RT6_LOOKUP_F_SRCPREF_PUBLIC	0x00000010
 #define RT6_LOOKUP_F_SRCPREF_COA	0x00000020
 
+/*
+ * rt6_srcprefs2flags() and rt6_flags2srcprefs() translate
+ * between IPV6_ADDR_PREFERENCES socket option values
+ *	IPV6_PREFER_SRC_TMP    = 0x1
+ *	IPV6_PREFER_SRC_PUBLIC = 0x2
+ *	IPV6_PREFER_SRC_COA    = 0x4
+ * and above RT6_LOOKUP_F_SRCPREF_xxx flags.
+ */
+static inline int rt6_srcprefs2flags(unsigned int srcprefs)
+{
+	/* No need to bitmask because srcprefs have only 3 bits. */
+	return srcprefs << 3;
+}
+
+static inline unsigned int rt6_flags2srcprefs(int flags)
+{
+	return (flags >> 3) & 7;
+}
 
 extern void			ip6_route_input(struct sk_buff *skb);
 
diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h
index 83b4e00..fbf9d1c 100644
--- a/include/net/ip6_tunnel.h
+++ b/include/net/ip6_tunnel.h
@@ -15,7 +15,6 @@
 struct ip6_tnl {
 	struct ip6_tnl *next;	/* next tunnel in list */
 	struct net_device *dev;	/* virtual device associated with tunnel */
-	int recursion;		/* depth of hard_start_xmit recursion */
 	struct ip6_tnl_parm parms;	/* tunnel configuration parameters */
 	struct flowi fl;	/* flowi template for xmit */
 	struct dst_entry *dst_cache;    /* cached dst */
diff --git a/include/net/irda/irttp.h b/include/net/irda/irttp.h
index 0788c23..11aee7a 100644
--- a/include/net/irda/irttp.h
+++ b/include/net/irda/irttp.h
@@ -97,7 +97,7 @@
 #define TTP_MAX_SDU_SIZE 0x01
 
 /*
- *  This structure contains all data assosiated with one instance of a TTP 
+ *  This structure contains all data associated with one instance of a TTP 
  *  connection.
  */
 struct tsap_cb {
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 80eb7cc..45d7d44 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2426,7 +2426,8 @@
 			  struct ieee80211_sta *sta, void *priv_sta);
 	void (*rate_update)(void *priv, struct ieee80211_supported_band *sband,
 			    struct ieee80211_sta *sta,
-			    void *priv_sta, u32 changed);
+			    void *priv_sta, u32 changed,
+			    enum nl80211_channel_type oper_chan_type);
 	void (*free_sta)(void *priv, struct ieee80211_sta *sta,
 			 void *priv_sta);
 
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 82b7be4..bd10a79 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -100,14 +100,9 @@
 extern struct net init_net;
 
 #ifdef CONFIG_NET
-#define INIT_NET_NS(net_ns) .net_ns = &init_net,
-
 extern struct net *copy_net_ns(unsigned long flags, struct net *net_ns);
 
 #else /* CONFIG_NET */
-
-#define INIT_NET_NS(net_ns)
-
 static inline struct net *copy_net_ns(unsigned long flags, struct net *net_ns)
 {
 	/* There is nothing to copy so this is a noop */
diff --git a/include/net/sock.h b/include/net/sock.h
index 6cb1676..092b055 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -253,6 +253,8 @@
 	struct {
 		struct sk_buff *head;
 		struct sk_buff *tail;
+		int len;
+		int limit;
 	} sk_backlog;
 	wait_queue_head_t	*sk_sleep;
 	struct dst_entry	*sk_dst_cache;
@@ -589,8 +591,8 @@
 	return sk->sk_wmem_queued < sk->sk_sndbuf;
 }
 
-/* The per-socket spinlock must be held here. */
-static inline void sk_add_backlog(struct sock *sk, struct sk_buff *skb)
+/* OOB backlog add */
+static inline void __sk_add_backlog(struct sock *sk, struct sk_buff *skb)
 {
 	if (!sk->sk_backlog.tail) {
 		sk->sk_backlog.head = sk->sk_backlog.tail = skb;
@@ -601,6 +603,17 @@
 	skb->next = NULL;
 }
 
+/* The per-socket spinlock must be held here. */
+static inline __must_check int sk_add_backlog(struct sock *sk, struct sk_buff *skb)
+{
+	if (sk->sk_backlog.len >= max(sk->sk_backlog.limit, sk->sk_rcvbuf << 1))
+		return -ENOBUFS;
+
+	__sk_add_backlog(sk, skb);
+	sk->sk_backlog.len += skb->truesize;
+	return 0;
+}
+
 static inline int sk_backlog_rcv(struct sock *sk, struct sk_buff *skb)
 {
 	return sk->sk_backlog_rcv(sk, skb);
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 56f0aec..75be5a2 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -939,7 +939,7 @@
 
 		tp->ucopy.memory = 0;
 	} else if (skb_queue_len(&tp->ucopy.prequeue) == 1) {
-		wake_up_interruptible_poll(sk->sk_sleep,
+		wake_up_interruptible_sync_poll(sk->sk_sleep,
 					   POLLIN | POLLRDNORM | POLLRDBAND);
 		if (!inet_csk_ack_scheduled(sk))
 			inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index a7df327..d74e080b 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -275,7 +275,8 @@
 					     struct dst_entry *dst,
 					     int nfheader_len);
 	int			(*fill_dst)(struct xfrm_dst *xdst,
-					    struct net_device *dev);
+					    struct net_device *dev,
+					    struct flowi *fl);
 };
 
 extern int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo);
diff --git a/include/scsi/sg.h b/include/scsi/sg.h
index 934ae38..a9f3c6f 100644
--- a/include/scsi/sg.h
+++ b/include/scsi/sg.h
@@ -70,6 +70,9 @@
  (for the lk 2.2 series).
 */
 
+#ifdef __KERNEL__
+extern int sg_big_buff; /* for sysctl */
+#endif
 
 /* New interface introduced in the 3.x SG drivers follows */
 
diff --git a/include/sound/asound.h b/include/sound/asound.h
index 1f57bb9..0985955 100644
--- a/include/sound/asound.h
+++ b/include/sound/asound.h
@@ -544,7 +544,7 @@
  *  Timer section - /dev/snd/timer
  */
 
-#define SNDRV_TIMER_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 5)
+#define SNDRV_TIMER_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 6)
 
 enum {
 	SNDRV_TIMER_CLASS_NONE = -1,
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index 0804cd5..601ad77 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -699,9 +699,9 @@
  *	__cpu = smp_processor_id();
  *
  *	if (in_nmi())
- *		trace_buf = rcu_dereference(perf_trace_buf_nmi);
+ *		trace_buf = rcu_dereference_sched(perf_trace_buf_nmi);
  *	else
- *		trace_buf = rcu_dereference(perf_trace_buf);
+ *		trace_buf = rcu_dereference_sched(perf_trace_buf);
  *
  *	if (!trace_buf)
  *		goto end;
diff --git a/include/video/broadsheetfb.h b/include/video/broadsheetfb.h
index a758534..548d28f 100644
--- a/include/video/broadsheetfb.h
+++ b/include/video/broadsheetfb.h
@@ -29,11 +29,19 @@
 #define BS_CMD_UPD_FULL		0x33
 #define BS_CMD_UPD_GDRV_CLR	0x37
 
+/* Broadsheet register interface defines */
+#define BS_REG_REV		0x00
+#define BS_REG_PRC		0x02
+
 /* Broadsheet pin interface specific defines */
 #define BS_CS	0x01
 #define BS_DC 	0x02
 #define BS_WR 	0x03
 
+/* Broadsheet IO interface specific defines */
+#define BS_MMIO_CMD	0x01
+#define BS_MMIO_DATA	0x02
+
 /* struct used by broadsheet. board specific stuff comes from *board */
 struct broadsheetfb_par {
 	struct fb_info *info;
@@ -41,6 +49,8 @@
 	void (*write_reg)(struct broadsheetfb_par *, u16 reg, u16 val);
 	u16 (*read_reg)(struct broadsheetfb_par *, u16 reg);
 	wait_queue_head_t waitq;
+	int panel_index;
+	struct mutex io_lock;
 };
 
 /* board specific routines */
@@ -48,12 +58,17 @@
 	struct module *owner;
 	int (*init)(struct broadsheetfb_par *);
 	int (*wait_for_rdy)(struct broadsheetfb_par *);
-	void (*set_ctl)(struct broadsheetfb_par *, unsigned char, u8);
-	void (*set_hdb)(struct broadsheetfb_par *, u16);
-	u16 (*get_hdb)(struct broadsheetfb_par *);
 	void (*cleanup)(struct broadsheetfb_par *);
 	int (*get_panel_type)(void);
 	int (*setup_irq)(struct fb_info *);
-};
 
+	/* Functions for boards that use GPIO */
+	void (*set_ctl)(struct broadsheetfb_par *, unsigned char, u8);
+	void (*set_hdb)(struct broadsheetfb_par *, u16);
+	u16 (*get_hdb)(struct broadsheetfb_par *);
+
+	/* Functions for boards that have specialized MMIO */
+	void (*mmio_write)(struct broadsheetfb_par *, int type, u16);
+	u16 (*mmio_read)(struct broadsheetfb_par *);
+};
 #endif
diff --git a/init/Kconfig b/init/Kconfig
index 089a230..eb77e8c 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -463,6 +463,7 @@
 
 menuconfig CGROUPS
 	boolean "Control Group support"
+	depends on EVENTFD
 	help
 	  This option adds support for grouping sets of processes together, for
 	  use with process control subsystems such as Cpusets, CFS, memory
diff --git a/ipc/Makefile b/ipc/Makefile
index 4e1955e..9075e17 100644
--- a/ipc/Makefile
+++ b/ipc/Makefile
@@ -3,7 +3,7 @@
 #
 
 obj-$(CONFIG_SYSVIPC_COMPAT) += compat.o
-obj-$(CONFIG_SYSVIPC) += util.o msgutil.o msg.o sem.o shm.o ipcns_notifier.o
+obj-$(CONFIG_SYSVIPC) += util.o msgutil.o msg.o sem.o shm.o ipcns_notifier.o syscall.o
 obj-$(CONFIG_SYSVIPC_SYSCTL) += ipc_sysctl.o
 obj_mq-$(CONFIG_COMPAT) += compat_mq.o
 obj-$(CONFIG_POSIX_MQUEUE) += mqueue.o msgutil.o $(obj_mq-y)
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index b6cb064..e4e3f04 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -155,7 +155,7 @@
 			spin_lock(&mq_lock);
 			if (u->mq_bytes + mq_bytes < u->mq_bytes ||
 		 	    u->mq_bytes + mq_bytes >
-			    p->signal->rlim[RLIMIT_MSGQUEUE].rlim_cur) {
+			    task_rlimit(p, RLIMIT_MSGQUEUE)) {
 				spin_unlock(&mq_lock);
 				kfree(info->messages);
 				goto out_inode;
diff --git a/ipc/shm.c b/ipc/shm.c
index 23256b8..1a314c8 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -764,8 +764,7 @@
 			if (euid != shp->shm_perm.uid &&
 			    euid != shp->shm_perm.cuid)
 				goto out_unlock;
-			if (cmd == SHM_LOCK &&
-			    !current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur)
+			if (cmd == SHM_LOCK && !rlimit(RLIMIT_MEMLOCK))
 				goto out_unlock;
 		}
 
diff --git a/ipc/syscall.c b/ipc/syscall.c
new file mode 100644
index 0000000..355a3da
--- /dev/null
+++ b/ipc/syscall.c
@@ -0,0 +1,99 @@
+/*
+ * sys_ipc() is the old de-multiplexer for the SysV IPC calls.
+ *
+ * This is really horribly ugly, and new architectures should just wire up
+ * the individual syscalls instead.
+ */
+#include <linux/unistd.h>
+
+#ifdef __ARCH_WANT_SYS_IPC
+#include <linux/errno.h>
+#include <linux/ipc.h>
+#include <linux/shm.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+
+SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second,
+		unsigned long, third, void __user *, ptr, long, fifth)
+{
+	int version, ret;
+
+	version = call >> 16; /* hack for backward compatibility */
+	call &= 0xffff;
+
+	switch (call) {
+	case SEMOP:
+		return sys_semtimedop(first, (struct sembuf __user *)ptr,
+				      second, NULL);
+	case SEMTIMEDOP:
+		return sys_semtimedop(first, (struct sembuf __user *)ptr,
+				      second,
+				      (const struct timespec __user *)fifth);
+
+	case SEMGET:
+		return sys_semget(first, second, third);
+	case SEMCTL: {
+		union semun fourth;
+		if (!ptr)
+			return -EINVAL;
+		if (get_user(fourth.__pad, (void __user * __user *) ptr))
+			return -EFAULT;
+		return sys_semctl(first, second, third, fourth);
+	}
+
+	case MSGSND:
+		return sys_msgsnd(first, (struct msgbuf __user *) ptr,
+				  second, third);
+	case MSGRCV:
+		switch (version) {
+		case 0: {
+			struct ipc_kludge tmp;
+			if (!ptr)
+				return -EINVAL;
+
+			if (copy_from_user(&tmp,
+					   (struct ipc_kludge __user *) ptr,
+					   sizeof(tmp)))
+				return -EFAULT;
+			return sys_msgrcv(first, tmp.msgp, second,
+					   tmp.msgtyp, third);
+		}
+		default:
+			return sys_msgrcv(first,
+					   (struct msgbuf __user *) ptr,
+					   second, fifth, third);
+		}
+	case MSGGET:
+		return sys_msgget((key_t) first, second);
+	case MSGCTL:
+		return sys_msgctl(first, second, (struct msqid_ds __user *)ptr);
+
+	case SHMAT:
+		switch (version) {
+		default: {
+			unsigned long raddr;
+			ret = do_shmat(first, (char __user *)ptr,
+				       second, &raddr);
+			if (ret)
+				return ret;
+			return put_user(raddr, (unsigned long __user *) third);
+		}
+		case 1:
+			/*
+			 * This was the entry point for kernel-originating calls
+			 * from iBCS2 in 2.2 days.
+			 */
+			return -EINVAL;
+		}
+	case SHMDT:
+		return sys_shmdt((char __user *)ptr);
+	case SHMGET:
+		return sys_shmget(first, second, third);
+	case SHMCTL:
+		return sys_shmctl(first, second,
+				   (struct shmid_ds __user *) ptr);
+	default:
+		return -ENOSYS;
+	}
+}
+#endif
diff --git a/kernel/acct.c b/kernel/acct.c
index a6605ca..24f8c81 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -588,16 +588,6 @@
 }
 
 /**
- * acct_init_pacct - initialize a new pacct_struct
- * @pacct: per-process accounting info struct to initialize
- */
-void acct_init_pacct(struct pacct_struct *pacct)
-{
-	memset(pacct, 0, sizeof(struct pacct_struct));
-	pacct->ac_utime = pacct->ac_stime = cputime_zero;
-}
-
-/**
  * acct_collect - collect accounting information into pacct_struct
  * @exitcode: task exit code
  * @group_dead: not 0, if this thread is the last one in the process.
diff --git a/kernel/audit.c b/kernel/audit.c
index 5feed23..78f7f86 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -398,7 +398,7 @@
 	skb_get(skb);
 	err = netlink_unicast(audit_sock, skb, audit_nlk_pid, 0);
 	if (err < 0) {
-		BUG_ON(err != -ECONNREFUSED); /* Shoudn't happen */
+		BUG_ON(err != -ECONNREFUSED); /* Shouldn't happen */
 		printk(KERN_ERR "audit: *NO* daemon at audit_pid=%d\n", audit_pid);
 		audit_log_lost("auditd dissapeared\n");
 		audit_pid = 0;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 4fd90e1..ef909a3 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -4,6 +4,10 @@
  *  Based originally on the cpuset system, extracted by Paul Menage
  *  Copyright (C) 2006 Google, Inc
  *
+ *  Notifications support
+ *  Copyright (C) 2009 Nokia Corporation
+ *  Author: Kirill A. Shutemov
+ *
  *  Copyright notices from the original cpuset code:
  *  --------------------------------------------------
  *  Copyright (C) 2003 BULL SA.
@@ -44,6 +48,7 @@
 #include <linux/string.h>
 #include <linux/sort.h>
 #include <linux/kmod.h>
+#include <linux/module.h>
 #include <linux/delayacct.h>
 #include <linux/cgroupstats.h>
 #include <linux/hash.h>
@@ -52,15 +57,21 @@
 #include <linux/pid_namespace.h>
 #include <linux/idr.h>
 #include <linux/vmalloc.h> /* TODO: replace with more sophisticated array */
+#include <linux/eventfd.h>
+#include <linux/poll.h>
 
 #include <asm/atomic.h>
 
 static DEFINE_MUTEX(cgroup_mutex);
 
-/* Generate an array of cgroup subsystem pointers */
+/*
+ * Generate an array of cgroup subsystem pointers. At boot time, this is
+ * populated up to CGROUP_BUILTIN_SUBSYS_COUNT, and modular subsystems are
+ * registered after that. The mutable section of this array is protected by
+ * cgroup_mutex.
+ */
 #define SUBSYS(_x) &_x ## _subsys,
-
-static struct cgroup_subsys *subsys[] = {
+static struct cgroup_subsys *subsys[CGROUP_SUBSYS_COUNT] = {
 #include <linux/cgroup_subsys.h>
 };
 
@@ -147,6 +158,35 @@
 	unsigned short stack[0]; /* Array of Length (depth+1) */
 };
 
+/*
+ * cgroup_event represents events which userspace want to recieve.
+ */
+struct cgroup_event {
+	/*
+	 * Cgroup which the event belongs to.
+	 */
+	struct cgroup *cgrp;
+	/*
+	 * Control file which the event associated.
+	 */
+	struct cftype *cft;
+	/*
+	 * eventfd to signal userspace about the event.
+	 */
+	struct eventfd_ctx *eventfd;
+	/*
+	 * Each of these stored in a list by the cgroup.
+	 */
+	struct list_head list;
+	/*
+	 * All fields below needed to unregister event when
+	 * userspace closes eventfd.
+	 */
+	poll_table pt;
+	wait_queue_head_t *wqh;
+	wait_queue_t wait;
+	struct work_struct remove;
+};
 
 /* The list of hierarchy roots */
 
@@ -250,7 +290,8 @@
 static struct css_set init_css_set;
 static struct cg_cgroup_link init_css_set_link;
 
-static int cgroup_subsys_init_idr(struct cgroup_subsys *ss);
+static int cgroup_init_idr(struct cgroup_subsys *ss,
+			   struct cgroup_subsys_state *css);
 
 /* css_set_lock protects the list of css_set objects, and the
  * chain of tasks off each css_set.  Nests outside task->alloc_lock
@@ -448,8 +489,11 @@
 	struct hlist_node *node;
 	struct css_set *cg;
 
-	/* Built the set of subsystem state objects that we want to
-	 * see in the new css_set */
+	/*
+	 * Build the set of subsystem state objects that we want to see in the
+	 * new css_set. while subsystems can change globally, the entries here
+	 * won't change, so no need for locking.
+	 */
 	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 		if (root->subsys_bits & (1UL << i)) {
 			/* Subsystem is in this hierarchy. So we want
@@ -696,6 +740,7 @@
 {
 	mutex_lock(&cgroup_mutex);
 }
+EXPORT_SYMBOL_GPL(cgroup_lock);
 
 /**
  * cgroup_unlock - release lock on cgroup changes
@@ -706,6 +751,7 @@
 {
 	mutex_unlock(&cgroup_mutex);
 }
+EXPORT_SYMBOL_GPL(cgroup_unlock);
 
 /*
  * A couple of forward declarations required, due to cyclic reference loop:
@@ -757,6 +803,7 @@
 			if (ret)
 				break;
 		}
+
 	return ret;
 }
 
@@ -884,7 +931,11 @@
 	css_put(css);
 }
 
-
+/*
+ * Call with cgroup_mutex held. Drops reference counts on modules, including
+ * any duplicate ones that parse_cgroupfs_options took. If this function
+ * returns an error, no reference counts are touched.
+ */
 static int rebind_subsystems(struct cgroupfs_root *root,
 			      unsigned long final_bits)
 {
@@ -892,6 +943,8 @@
 	struct cgroup *cgrp = &root->top_cgroup;
 	int i;
 
+	BUG_ON(!mutex_is_locked(&cgroup_mutex));
+
 	removed_bits = root->actual_subsys_bits & ~final_bits;
 	added_bits = final_bits & ~root->actual_subsys_bits;
 	/* Check that any added subsystems are currently free */
@@ -900,6 +953,12 @@
 		struct cgroup_subsys *ss = subsys[i];
 		if (!(bit & added_bits))
 			continue;
+		/*
+		 * Nobody should tell us to do a subsys that doesn't exist:
+		 * parse_cgroupfs_options should catch that case and refcounts
+		 * ensure that subsystems won't disappear once selected.
+		 */
+		BUG_ON(ss == NULL);
 		if (ss->root != &rootnode) {
 			/* Subsystem isn't free */
 			return -EBUSY;
@@ -919,6 +978,7 @@
 		unsigned long bit = 1UL << i;
 		if (bit & added_bits) {
 			/* We're binding this subsystem to this hierarchy */
+			BUG_ON(ss == NULL);
 			BUG_ON(cgrp->subsys[i]);
 			BUG_ON(!dummytop->subsys[i]);
 			BUG_ON(dummytop->subsys[i]->cgroup != dummytop);
@@ -930,8 +990,10 @@
 			if (ss->bind)
 				ss->bind(ss, cgrp);
 			mutex_unlock(&ss->hierarchy_mutex);
+			/* refcount was already taken, and we're keeping it */
 		} else if (bit & removed_bits) {
 			/* We're removing this subsystem */
+			BUG_ON(ss == NULL);
 			BUG_ON(cgrp->subsys[i] != dummytop->subsys[i]);
 			BUG_ON(cgrp->subsys[i]->cgroup != cgrp);
 			mutex_lock(&ss->hierarchy_mutex);
@@ -942,9 +1004,20 @@
 			subsys[i]->root = &rootnode;
 			list_move(&ss->sibling, &rootnode.subsys_list);
 			mutex_unlock(&ss->hierarchy_mutex);
+			/* subsystem is now free - drop reference on module */
+			module_put(ss->module);
 		} else if (bit & final_bits) {
 			/* Subsystem state should already exist */
+			BUG_ON(ss == NULL);
 			BUG_ON(!cgrp->subsys[i]);
+			/*
+			 * a refcount was taken, but we already had one, so
+			 * drop the extra reference.
+			 */
+			module_put(ss->module);
+#ifdef CONFIG_MODULE_UNLOAD
+			BUG_ON(ss->module && !module_refcount(ss->module));
+#endif
 		} else {
 			/* Subsystem state shouldn't exist */
 			BUG_ON(cgrp->subsys[i]);
@@ -986,13 +1059,20 @@
 
 };
 
-/* Convert a hierarchy specifier into a bitmask of subsystems and
- * flags. */
-static int parse_cgroupfs_options(char *data,
-				     struct cgroup_sb_opts *opts)
+/*
+ * Convert a hierarchy specifier into a bitmask of subsystems and flags. Call
+ * with cgroup_mutex held to protect the subsys[] array. This function takes
+ * refcounts on subsystems to be used, unless it returns error, in which case
+ * no refcounts are taken.
+ */
+static int parse_cgroupfs_options(char *data, struct cgroup_sb_opts *opts)
 {
 	char *token, *o = data ?: "all";
 	unsigned long mask = (unsigned long)-1;
+	int i;
+	bool module_pin_failed = false;
+
+	BUG_ON(!mutex_is_locked(&cgroup_mutex));
 
 #ifdef CONFIG_CPUSETS
 	mask = ~(1UL << cpuset_subsys_id);
@@ -1005,10 +1085,11 @@
 			return -EINVAL;
 		if (!strcmp(token, "all")) {
 			/* Add all non-disabled subsystems */
-			int i;
 			opts->subsys_bits = 0;
 			for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 				struct cgroup_subsys *ss = subsys[i];
+				if (ss == NULL)
+					continue;
 				if (!ss->disabled)
 					opts->subsys_bits |= 1ul << i;
 			}
@@ -1026,7 +1107,6 @@
 			if (!opts->release_agent)
 				return -ENOMEM;
 		} else if (!strncmp(token, "name=", 5)) {
-			int i;
 			const char *name = token + 5;
 			/* Can't specify an empty name */
 			if (!strlen(name))
@@ -1050,9 +1130,10 @@
 				return -ENOMEM;
 		} else {
 			struct cgroup_subsys *ss;
-			int i;
 			for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 				ss = subsys[i];
+				if (ss == NULL)
+					continue;
 				if (!strcmp(token, ss->name)) {
 					if (!ss->disabled)
 						set_bit(i, &opts->subsys_bits);
@@ -1087,9 +1168,54 @@
 	if (!opts->subsys_bits && !opts->name)
 		return -EINVAL;
 
+	/*
+	 * Grab references on all the modules we'll need, so the subsystems
+	 * don't dance around before rebind_subsystems attaches them. This may
+	 * take duplicate reference counts on a subsystem that's already used,
+	 * but rebind_subsystems handles this case.
+	 */
+	for (i = CGROUP_BUILTIN_SUBSYS_COUNT; i < CGROUP_SUBSYS_COUNT; i++) {
+		unsigned long bit = 1UL << i;
+
+		if (!(bit & opts->subsys_bits))
+			continue;
+		if (!try_module_get(subsys[i]->module)) {
+			module_pin_failed = true;
+			break;
+		}
+	}
+	if (module_pin_failed) {
+		/*
+		 * oops, one of the modules was going away. this means that we
+		 * raced with a module_delete call, and to the user this is
+		 * essentially a "subsystem doesn't exist" case.
+		 */
+		for (i--; i >= CGROUP_BUILTIN_SUBSYS_COUNT; i--) {
+			/* drop refcounts only on the ones we took */
+			unsigned long bit = 1UL << i;
+
+			if (!(bit & opts->subsys_bits))
+				continue;
+			module_put(subsys[i]->module);
+		}
+		return -ENOENT;
+	}
+
 	return 0;
 }
 
+static void drop_parsed_module_refcounts(unsigned long subsys_bits)
+{
+	int i;
+	for (i = CGROUP_BUILTIN_SUBSYS_COUNT; i < CGROUP_SUBSYS_COUNT; i++) {
+		unsigned long bit = 1UL << i;
+
+		if (!(bit & subsys_bits))
+			continue;
+		module_put(subsys[i]->module);
+	}
+}
+
 static int cgroup_remount(struct super_block *sb, int *flags, char *data)
 {
 	int ret = 0;
@@ -1106,21 +1232,19 @@
 	if (ret)
 		goto out_unlock;
 
-	/* Don't allow flags to change at remount */
-	if (opts.flags != root->flags) {
+	/* Don't allow flags or name to change at remount */
+	if (opts.flags != root->flags ||
+	    (opts.name && strcmp(opts.name, root->name))) {
 		ret = -EINVAL;
-		goto out_unlock;
-	}
-
-	/* Don't allow name to change at remount */
-	if (opts.name && strcmp(opts.name, root->name)) {
-		ret = -EINVAL;
+		drop_parsed_module_refcounts(opts.subsys_bits);
 		goto out_unlock;
 	}
 
 	ret = rebind_subsystems(root, opts.subsys_bits);
-	if (ret)
+	if (ret) {
+		drop_parsed_module_refcounts(opts.subsys_bits);
 		goto out_unlock;
+	}
 
 	/* (re)populate subsystem files */
 	cgroup_populate_dir(cgrp);
@@ -1151,6 +1275,8 @@
 	INIT_LIST_HEAD(&cgrp->release_list);
 	INIT_LIST_HEAD(&cgrp->pidlists);
 	mutex_init(&cgrp->pidlist_mutex);
+	INIT_LIST_HEAD(&cgrp->event_list);
+	spin_lock_init(&cgrp->event_list_lock);
 }
 
 static void init_cgroup_root(struct cgroupfs_root *root)
@@ -1306,7 +1432,9 @@
 	struct cgroupfs_root *new_root;
 
 	/* First find the desired set of subsystems */
+	mutex_lock(&cgroup_mutex);
 	ret = parse_cgroupfs_options(data, &opts);
+	mutex_unlock(&cgroup_mutex);
 	if (ret)
 		goto out_err;
 
@@ -1317,7 +1445,7 @@
 	new_root = cgroup_root_from_opts(&opts);
 	if (IS_ERR(new_root)) {
 		ret = PTR_ERR(new_root);
-		goto out_err;
+		goto drop_modules;
 	}
 	opts.new_root = new_root;
 
@@ -1326,7 +1454,7 @@
 	if (IS_ERR(sb)) {
 		ret = PTR_ERR(sb);
 		cgroup_drop_root(opts.new_root);
-		goto out_err;
+		goto drop_modules;
 	}
 
 	root = sb->s_fs_info;
@@ -1382,6 +1510,11 @@
 			free_cg_links(&tmp_cg_links);
 			goto drop_new_super;
 		}
+		/*
+		 * There must be no failure case after here, since rebinding
+		 * takes care of subsystems' refcounts, which are explicitly
+		 * dropped in the failure exit path.
+		 */
 
 		/* EBUSY should be the only error here */
 		BUG_ON(ret);
@@ -1420,6 +1553,8 @@
 		 * any) is not needed
 		 */
 		cgroup_drop_root(opts.new_root);
+		/* no subsys rebinding, so refcounts don't change */
+		drop_parsed_module_refcounts(opts.subsys_bits);
 	}
 
 	simple_set_mnt(mnt, sb);
@@ -1429,6 +1564,8 @@
 
  drop_new_super:
 	deactivate_locked_super(sb);
+ drop_modules:
+	drop_parsed_module_refcounts(opts.subsys_bits);
  out_err:
 	kfree(opts.release_agent);
 	kfree(opts.name);
@@ -1542,6 +1679,7 @@
 	memmove(buf, start, buf + buflen - start);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(cgroup_path);
 
 /**
  * cgroup_attach_task - attach task 'tsk' to cgroup 'cgrp'
@@ -1554,7 +1692,7 @@
 int cgroup_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
 {
 	int retval = 0;
-	struct cgroup_subsys *ss;
+	struct cgroup_subsys *ss, *failed_ss = NULL;
 	struct cgroup *oldcgrp;
 	struct css_set *cg;
 	struct css_set *newcg;
@@ -1568,8 +1706,16 @@
 	for_each_subsys(root, ss) {
 		if (ss->can_attach) {
 			retval = ss->can_attach(ss, cgrp, tsk, false);
-			if (retval)
-				return retval;
+			if (retval) {
+				/*
+				 * Remember on which subsystem the can_attach()
+				 * failed, so that we only call cancel_attach()
+				 * against the subsystems whose can_attach()
+				 * succeeded. (See below)
+				 */
+				failed_ss = ss;
+				goto out;
+			}
 		}
 	}
 
@@ -1583,14 +1729,17 @@
 	 */
 	newcg = find_css_set(cg, cgrp);
 	put_css_set(cg);
-	if (!newcg)
-		return -ENOMEM;
+	if (!newcg) {
+		retval = -ENOMEM;
+		goto out;
+	}
 
 	task_lock(tsk);
 	if (tsk->flags & PF_EXITING) {
 		task_unlock(tsk);
 		put_css_set(newcg);
-		return -ESRCH;
+		retval = -ESRCH;
+		goto out;
 	}
 	rcu_assign_pointer(tsk->cgroups, newcg);
 	task_unlock(tsk);
@@ -1616,7 +1765,22 @@
 	 * is no longer empty.
 	 */
 	cgroup_wakeup_rmdir_waiter(cgrp);
-	return 0;
+out:
+	if (retval) {
+		for_each_subsys(root, ss) {
+			if (ss == failed_ss)
+				/*
+				 * This subsystem was the one that failed the
+				 * can_attach() check earlier, so we don't need
+				 * to call cancel_attach() against it or any
+				 * remaining subsystems.
+				 */
+				break;
+			if (ss->cancel_attach)
+				ss->cancel_attach(ss, cgrp, tsk, false);
+		}
+	}
+	return retval;
 }
 
 /*
@@ -1682,6 +1846,7 @@
 	}
 	return true;
 }
+EXPORT_SYMBOL_GPL(cgroup_lock_live_group);
 
 static int cgroup_release_agent_write(struct cgroup *cgrp, struct cftype *cft,
 				      const char *buffer)
@@ -1950,6 +2115,16 @@
 	.rename = cgroup_rename,
 };
 
+/*
+ * Check if a file is a control file
+ */
+static inline struct cftype *__file_cft(struct file *file)
+{
+	if (file->f_dentry->d_inode->i_fop != &cgroup_file_operations)
+		return ERR_PTR(-EINVAL);
+	return __d_cft(file->f_dentry);
+}
+
 static int cgroup_create_file(struct dentry *dentry, mode_t mode,
 				struct super_block *sb)
 {
@@ -2069,6 +2244,7 @@
 		error = PTR_ERR(dentry);
 	return error;
 }
+EXPORT_SYMBOL_GPL(cgroup_add_file);
 
 int cgroup_add_files(struct cgroup *cgrp,
 			struct cgroup_subsys *subsys,
@@ -2083,6 +2259,7 @@
 	}
 	return 0;
 }
+EXPORT_SYMBOL_GPL(cgroup_add_files);
 
 /**
  * cgroup_task_count - count the number of tasks in a cgroup.
@@ -2468,7 +2645,8 @@
 {
 	struct cgroup_pidlist *l;
 	/* don't need task_nsproxy() if we're looking at ourself */
-	struct pid_namespace *ns = get_pid_ns(current->nsproxy->pid_ns);
+	struct pid_namespace *ns = current->nsproxy->pid_ns;
+
 	/*
 	 * We can't drop the pidlist_mutex before taking the l->mutex in case
 	 * the last ref-holder is trying to remove l from the list at the same
@@ -2478,8 +2656,6 @@
 	mutex_lock(&cgrp->pidlist_mutex);
 	list_for_each_entry(l, &cgrp->pidlists, links) {
 		if (l->key.type == type && l->key.ns == ns) {
-			/* found a matching list - drop the extra refcount */
-			put_pid_ns(ns);
 			/* make sure l doesn't vanish out from under us */
 			down_write(&l->mutex);
 			mutex_unlock(&cgrp->pidlist_mutex);
@@ -2490,13 +2666,12 @@
 	l = kmalloc(sizeof(struct cgroup_pidlist), GFP_KERNEL);
 	if (!l) {
 		mutex_unlock(&cgrp->pidlist_mutex);
-		put_pid_ns(ns);
 		return l;
 	}
 	init_rwsem(&l->mutex);
 	down_write(&l->mutex);
 	l->key.type = type;
-	l->key.ns = ns;
+	l->key.ns = get_pid_ns(ns);
 	l->use_count = 0; /* don't increment here */
 	l->list = NULL;
 	l->owner = cgrp;
@@ -2804,6 +2979,174 @@
 }
 
 /*
+ * Unregister event and free resources.
+ *
+ * Gets called from workqueue.
+ */
+static void cgroup_event_remove(struct work_struct *work)
+{
+	struct cgroup_event *event = container_of(work, struct cgroup_event,
+			remove);
+	struct cgroup *cgrp = event->cgrp;
+
+	/* TODO: check return code */
+	event->cft->unregister_event(cgrp, event->cft, event->eventfd);
+
+	eventfd_ctx_put(event->eventfd);
+	kfree(event);
+	dput(cgrp->dentry);
+}
+
+/*
+ * Gets called on POLLHUP on eventfd when user closes it.
+ *
+ * Called with wqh->lock held and interrupts disabled.
+ */
+static int cgroup_event_wake(wait_queue_t *wait, unsigned mode,
+		int sync, void *key)
+{
+	struct cgroup_event *event = container_of(wait,
+			struct cgroup_event, wait);
+	struct cgroup *cgrp = event->cgrp;
+	unsigned long flags = (unsigned long)key;
+
+	if (flags & POLLHUP) {
+		remove_wait_queue_locked(event->wqh, &event->wait);
+		spin_lock(&cgrp->event_list_lock);
+		list_del(&event->list);
+		spin_unlock(&cgrp->event_list_lock);
+		/*
+		 * We are in atomic context, but cgroup_event_remove() may
+		 * sleep, so we have to call it in workqueue.
+		 */
+		schedule_work(&event->remove);
+	}
+
+	return 0;
+}
+
+static void cgroup_event_ptable_queue_proc(struct file *file,
+		wait_queue_head_t *wqh, poll_table *pt)
+{
+	struct cgroup_event *event = container_of(pt,
+			struct cgroup_event, pt);
+
+	event->wqh = wqh;
+	add_wait_queue(wqh, &event->wait);
+}
+
+/*
+ * Parse input and register new cgroup event handler.
+ *
+ * Input must be in format '<event_fd> <control_fd> <args>'.
+ * Interpretation of args is defined by control file implementation.
+ */
+static int cgroup_write_event_control(struct cgroup *cgrp, struct cftype *cft,
+				      const char *buffer)
+{
+	struct cgroup_event *event = NULL;
+	unsigned int efd, cfd;
+	struct file *efile = NULL;
+	struct file *cfile = NULL;
+	char *endp;
+	int ret;
+
+	efd = simple_strtoul(buffer, &endp, 10);
+	if (*endp != ' ')
+		return -EINVAL;
+	buffer = endp + 1;
+
+	cfd = simple_strtoul(buffer, &endp, 10);
+	if ((*endp != ' ') && (*endp != '\0'))
+		return -EINVAL;
+	buffer = endp + 1;
+
+	event = kzalloc(sizeof(*event), GFP_KERNEL);
+	if (!event)
+		return -ENOMEM;
+	event->cgrp = cgrp;
+	INIT_LIST_HEAD(&event->list);
+	init_poll_funcptr(&event->pt, cgroup_event_ptable_queue_proc);
+	init_waitqueue_func_entry(&event->wait, cgroup_event_wake);
+	INIT_WORK(&event->remove, cgroup_event_remove);
+
+	efile = eventfd_fget(efd);
+	if (IS_ERR(efile)) {
+		ret = PTR_ERR(efile);
+		goto fail;
+	}
+
+	event->eventfd = eventfd_ctx_fileget(efile);
+	if (IS_ERR(event->eventfd)) {
+		ret = PTR_ERR(event->eventfd);
+		goto fail;
+	}
+
+	cfile = fget(cfd);
+	if (!cfile) {
+		ret = -EBADF;
+		goto fail;
+	}
+
+	/* the process need read permission on control file */
+	ret = file_permission(cfile, MAY_READ);
+	if (ret < 0)
+		goto fail;
+
+	event->cft = __file_cft(cfile);
+	if (IS_ERR(event->cft)) {
+		ret = PTR_ERR(event->cft);
+		goto fail;
+	}
+
+	if (!event->cft->register_event || !event->cft->unregister_event) {
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	ret = event->cft->register_event(cgrp, event->cft,
+			event->eventfd, buffer);
+	if (ret)
+		goto fail;
+
+	if (efile->f_op->poll(efile, &event->pt) & POLLHUP) {
+		event->cft->unregister_event(cgrp, event->cft, event->eventfd);
+		ret = 0;
+		goto fail;
+	}
+
+	/*
+	 * Events should be removed after rmdir of cgroup directory, but before
+	 * destroying subsystem state objects. Let's take reference to cgroup
+	 * directory dentry to do that.
+	 */
+	dget(cgrp->dentry);
+
+	spin_lock(&cgrp->event_list_lock);
+	list_add(&event->list, &cgrp->event_list);
+	spin_unlock(&cgrp->event_list_lock);
+
+	fput(cfile);
+	fput(efile);
+
+	return 0;
+
+fail:
+	if (cfile)
+		fput(cfile);
+
+	if (event && event->eventfd && !IS_ERR(event->eventfd))
+		eventfd_ctx_put(event->eventfd);
+
+	if (!IS_ERR_OR_NULL(efile))
+		fput(efile);
+
+	kfree(event);
+
+	return ret;
+}
+
+/*
  * for the common functions, 'private' gives the type of file
  */
 /* for hysterical raisins, we can't put this on the older files */
@@ -2828,6 +3171,11 @@
 		.read_u64 = cgroup_read_notify_on_release,
 		.write_u64 = cgroup_write_notify_on_release,
 	},
+	{
+		.name = CGROUP_FILE_GENERIC_PREFIX "event_control",
+		.write_string = cgroup_write_event_control,
+		.mode = S_IWUGO,
+	},
 };
 
 static struct cftype cft_release_agent = {
@@ -2892,8 +3240,14 @@
 	/* We need to take each hierarchy_mutex in a consistent order */
 	int i;
 
+	/*
+	 * No worry about a race with rebind_subsystems that might mess up the
+	 * locking order, since both parties are under cgroup_mutex.
+	 */
 	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 		struct cgroup_subsys *ss = subsys[i];
+		if (ss == NULL)
+			continue;
 		if (ss->root == root)
 			mutex_lock(&ss->hierarchy_mutex);
 	}
@@ -2905,6 +3259,8 @@
 
 	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 		struct cgroup_subsys *ss = subsys[i];
+		if (ss == NULL)
+			continue;
 		if (ss->root == root)
 			mutex_unlock(&ss->hierarchy_mutex);
 	}
@@ -3028,11 +3384,16 @@
 	 * synchronization other than RCU, and the subsystem linked
 	 * list isn't RCU-safe */
 	int i;
+	/*
+	 * We won't need to lock the subsys array, because the subsystems
+	 * we're concerned about aren't going anywhere since our cgroup root
+	 * has a reference on them.
+	 */
 	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 		struct cgroup_subsys *ss = subsys[i];
 		struct cgroup_subsys_state *css;
-		/* Skip subsystems not in this hierarchy */
-		if (ss->root != cgrp->root)
+		/* Skip subsystems not present or not in this hierarchy */
+		if (ss == NULL || ss->root != cgrp->root)
 			continue;
 		css = cgrp->subsys[ss->subsys_id];
 		/* When called from check_for_release() it's possible
@@ -3106,6 +3467,7 @@
 	struct dentry *d;
 	struct cgroup *parent;
 	DEFINE_WAIT(wait);
+	struct cgroup_event *event, *tmp;
 	int ret;
 
 	/* the vfs holds both inode->i_mutex already */
@@ -3189,6 +3551,20 @@
 	set_bit(CGRP_RELEASABLE, &parent->flags);
 	check_for_release(parent);
 
+	/*
+	 * Unregister events and notify userspace.
+	 * Notify userspace about cgroup removing only after rmdir of cgroup
+	 * directory to avoid race between userspace and kernelspace
+	 */
+	spin_lock(&cgrp->event_list_lock);
+	list_for_each_entry_safe(event, tmp, &cgrp->event_list, list) {
+		list_del(&event->list);
+		remove_wait_queue(event->wqh, &event->wait);
+		eventfd_signal(event->eventfd, 1);
+		schedule_work(&event->remove);
+	}
+	spin_unlock(&cgrp->event_list_lock);
+
 	mutex_unlock(&cgroup_mutex);
 	return 0;
 }
@@ -3223,9 +3599,198 @@
 	mutex_init(&ss->hierarchy_mutex);
 	lockdep_set_class(&ss->hierarchy_mutex, &ss->subsys_key);
 	ss->active = 1;
+
+	/* this function shouldn't be used with modular subsystems, since they
+	 * need to register a subsys_id, among other things */
+	BUG_ON(ss->module);
 }
 
 /**
+ * cgroup_load_subsys: load and register a modular subsystem at runtime
+ * @ss: the subsystem to load
+ *
+ * This function should be called in a modular subsystem's initcall. If the
+ * subsytem is built as a module, it will be assigned a new subsys_id and set
+ * up for use. If the subsystem is built-in anyway, work is delegated to the
+ * simpler cgroup_init_subsys.
+ */
+int __init_or_module cgroup_load_subsys(struct cgroup_subsys *ss)
+{
+	int i;
+	struct cgroup_subsys_state *css;
+
+	/* check name and function validity */
+	if (ss->name == NULL || strlen(ss->name) > MAX_CGROUP_TYPE_NAMELEN ||
+	    ss->create == NULL || ss->destroy == NULL)
+		return -EINVAL;
+
+	/*
+	 * we don't support callbacks in modular subsystems. this check is
+	 * before the ss->module check for consistency; a subsystem that could
+	 * be a module should still have no callbacks even if the user isn't
+	 * compiling it as one.
+	 */
+	if (ss->fork || ss->exit)
+		return -EINVAL;
+
+	/*
+	 * an optionally modular subsystem is built-in: we want to do nothing,
+	 * since cgroup_init_subsys will have already taken care of it.
+	 */
+	if (ss->module == NULL) {
+		/* a few sanity checks */
+		BUG_ON(ss->subsys_id >= CGROUP_BUILTIN_SUBSYS_COUNT);
+		BUG_ON(subsys[ss->subsys_id] != ss);
+		return 0;
+	}
+
+	/*
+	 * need to register a subsys id before anything else - for example,
+	 * init_cgroup_css needs it.
+	 */
+	mutex_lock(&cgroup_mutex);
+	/* find the first empty slot in the array */
+	for (i = CGROUP_BUILTIN_SUBSYS_COUNT; i < CGROUP_SUBSYS_COUNT; i++) {
+		if (subsys[i] == NULL)
+			break;
+	}
+	if (i == CGROUP_SUBSYS_COUNT) {
+		/* maximum number of subsystems already registered! */
+		mutex_unlock(&cgroup_mutex);
+		return -EBUSY;
+	}
+	/* assign ourselves the subsys_id */
+	ss->subsys_id = i;
+	subsys[i] = ss;
+
+	/*
+	 * no ss->create seems to need anything important in the ss struct, so
+	 * this can happen first (i.e. before the rootnode attachment).
+	 */
+	css = ss->create(ss, dummytop);
+	if (IS_ERR(css)) {
+		/* failure case - need to deassign the subsys[] slot. */
+		subsys[i] = NULL;
+		mutex_unlock(&cgroup_mutex);
+		return PTR_ERR(css);
+	}
+
+	list_add(&ss->sibling, &rootnode.subsys_list);
+	ss->root = &rootnode;
+
+	/* our new subsystem will be attached to the dummy hierarchy. */
+	init_cgroup_css(css, ss, dummytop);
+	/* init_idr must be after init_cgroup_css because it sets css->id. */
+	if (ss->use_id) {
+		int ret = cgroup_init_idr(ss, css);
+		if (ret) {
+			dummytop->subsys[ss->subsys_id] = NULL;
+			ss->destroy(ss, dummytop);
+			subsys[i] = NULL;
+			mutex_unlock(&cgroup_mutex);
+			return ret;
+		}
+	}
+
+	/*
+	 * Now we need to entangle the css into the existing css_sets. unlike
+	 * in cgroup_init_subsys, there are now multiple css_sets, so each one
+	 * will need a new pointer to it; done by iterating the css_set_table.
+	 * furthermore, modifying the existing css_sets will corrupt the hash
+	 * table state, so each changed css_set will need its hash recomputed.
+	 * this is all done under the css_set_lock.
+	 */
+	write_lock(&css_set_lock);
+	for (i = 0; i < CSS_SET_TABLE_SIZE; i++) {
+		struct css_set *cg;
+		struct hlist_node *node, *tmp;
+		struct hlist_head *bucket = &css_set_table[i], *new_bucket;
+
+		hlist_for_each_entry_safe(cg, node, tmp, bucket, hlist) {
+			/* skip entries that we already rehashed */
+			if (cg->subsys[ss->subsys_id])
+				continue;
+			/* remove existing entry */
+			hlist_del(&cg->hlist);
+			/* set new value */
+			cg->subsys[ss->subsys_id] = css;
+			/* recompute hash and restore entry */
+			new_bucket = css_set_hash(cg->subsys);
+			hlist_add_head(&cg->hlist, new_bucket);
+		}
+	}
+	write_unlock(&css_set_lock);
+
+	mutex_init(&ss->hierarchy_mutex);
+	lockdep_set_class(&ss->hierarchy_mutex, &ss->subsys_key);
+	ss->active = 1;
+
+	/* success! */
+	mutex_unlock(&cgroup_mutex);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cgroup_load_subsys);
+
+/**
+ * cgroup_unload_subsys: unload a modular subsystem
+ * @ss: the subsystem to unload
+ *
+ * This function should be called in a modular subsystem's exitcall. When this
+ * function is invoked, the refcount on the subsystem's module will be 0, so
+ * the subsystem will not be attached to any hierarchy.
+ */
+void cgroup_unload_subsys(struct cgroup_subsys *ss)
+{
+	struct cg_cgroup_link *link;
+	struct hlist_head *hhead;
+
+	BUG_ON(ss->module == NULL);
+
+	/*
+	 * we shouldn't be called if the subsystem is in use, and the use of
+	 * try_module_get in parse_cgroupfs_options should ensure that it
+	 * doesn't start being used while we're killing it off.
+	 */
+	BUG_ON(ss->root != &rootnode);
+
+	mutex_lock(&cgroup_mutex);
+	/* deassign the subsys_id */
+	BUG_ON(ss->subsys_id < CGROUP_BUILTIN_SUBSYS_COUNT);
+	subsys[ss->subsys_id] = NULL;
+
+	/* remove subsystem from rootnode's list of subsystems */
+	list_del(&ss->sibling);
+
+	/*
+	 * disentangle the css from all css_sets attached to the dummytop. as
+	 * in loading, we need to pay our respects to the hashtable gods.
+	 */
+	write_lock(&css_set_lock);
+	list_for_each_entry(link, &dummytop->css_sets, cgrp_link_list) {
+		struct css_set *cg = link->cg;
+
+		hlist_del(&cg->hlist);
+		BUG_ON(!cg->subsys[ss->subsys_id]);
+		cg->subsys[ss->subsys_id] = NULL;
+		hhead = css_set_hash(cg->subsys);
+		hlist_add_head(&cg->hlist, hhead);
+	}
+	write_unlock(&css_set_lock);
+
+	/*
+	 * remove subsystem's css from the dummytop and free it - need to free
+	 * before marking as null because ss->destroy needs the cgrp->subsys
+	 * pointer to find their state. note that this also takes care of
+	 * freeing the css_id.
+	 */
+	ss->destroy(ss, dummytop);
+	dummytop->subsys[ss->subsys_id] = NULL;
+
+	mutex_unlock(&cgroup_mutex);
+}
+EXPORT_SYMBOL_GPL(cgroup_unload_subsys);
+
+/**
  * cgroup_init_early - cgroup initialization at system boot
  *
  * Initialize cgroups at system boot, and initialize any
@@ -3253,7 +3818,8 @@
 	for (i = 0; i < CSS_SET_TABLE_SIZE; i++)
 		INIT_HLIST_HEAD(&css_set_table[i]);
 
-	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+	/* at bootup time, we don't worry about modular subsystems */
+	for (i = 0; i < CGROUP_BUILTIN_SUBSYS_COUNT; i++) {
 		struct cgroup_subsys *ss = subsys[i];
 
 		BUG_ON(!ss->name);
@@ -3288,12 +3854,13 @@
 	if (err)
 		return err;
 
-	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+	/* at bootup time, we don't worry about modular subsystems */
+	for (i = 0; i < CGROUP_BUILTIN_SUBSYS_COUNT; i++) {
 		struct cgroup_subsys *ss = subsys[i];
 		if (!ss->early_init)
 			cgroup_init_subsys(ss);
 		if (ss->use_id)
-			cgroup_subsys_init_idr(ss);
+			cgroup_init_idr(ss, init_css_set.subsys[ss->subsys_id]);
 	}
 
 	/* Add init_css_set to the hash table */
@@ -3397,9 +3964,16 @@
 	int i;
 
 	seq_puts(m, "#subsys_name\thierarchy\tnum_cgroups\tenabled\n");
+	/*
+	 * ideally we don't want subsystems moving around while we do this.
+	 * cgroup_mutex is also necessary to guarantee an atomic snapshot of
+	 * subsys/hierarchy state.
+	 */
 	mutex_lock(&cgroup_mutex);
 	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 		struct cgroup_subsys *ss = subsys[i];
+		if (ss == NULL)
+			continue;
 		seq_printf(m, "%s\t%d\t%d\t%d\n",
 			   ss->name, ss->root->hierarchy_id,
 			   ss->root->number_of_cgroups, !ss->disabled);
@@ -3457,7 +4031,12 @@
 {
 	if (need_forkexit_callback) {
 		int i;
-		for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+		/*
+		 * forkexit callbacks are only supported for builtin
+		 * subsystems, and the builtin section of the subsys array is
+		 * immutable, so we don't need to lock the subsys array here.
+		 */
+		for (i = 0; i < CGROUP_BUILTIN_SUBSYS_COUNT; i++) {
 			struct cgroup_subsys *ss = subsys[i];
 			if (ss->fork)
 				ss->fork(ss, child);
@@ -3526,7 +4105,11 @@
 	struct css_set *cg;
 
 	if (run_callbacks && need_forkexit_callback) {
-		for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+		/*
+		 * modular subsystems can't use callbacks, so no need to lock
+		 * the subsys array
+		 */
+		for (i = 0; i < CGROUP_BUILTIN_SUBSYS_COUNT; i++) {
 			struct cgroup_subsys *ss = subsys[i];
 			if (ss->exit)
 				ss->exit(ss, tsk);
@@ -3720,12 +4303,13 @@
 	}
 }
 
-void __css_put(struct cgroup_subsys_state *css)
+/* Caller must verify that the css is not for root cgroup */
+void __css_put(struct cgroup_subsys_state *css, int count)
 {
 	struct cgroup *cgrp = css->cgroup;
 	int val;
 	rcu_read_lock();
-	val = atomic_dec_return(&css->refcnt);
+	val = atomic_sub_return(count, &css->refcnt);
 	if (val == 1) {
 		if (notify_on_release(cgrp)) {
 			set_bit(CGRP_RELEASABLE, &cgrp->flags);
@@ -3736,6 +4320,7 @@
 	rcu_read_unlock();
 	WARN_ON_ONCE(val < 1);
 }
+EXPORT_SYMBOL_GPL(__css_put);
 
 /*
  * Notify userspace when a cgroup is released, by running the
@@ -3817,8 +4402,11 @@
 	while ((token = strsep(&str, ",")) != NULL) {
 		if (!*token)
 			continue;
-
-		for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+		/*
+		 * cgroup_disable, being at boot time, can't know about module
+		 * subsystems, so we don't worry about them.
+		 */
+		for (i = 0; i < CGROUP_BUILTIN_SUBSYS_COUNT; i++) {
 			struct cgroup_subsys *ss = subsys[i];
 
 			if (!strcmp(token, ss->name)) {
@@ -3848,6 +4436,7 @@
 		return cssid->id;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(css_id);
 
 unsigned short css_depth(struct cgroup_subsys_state *css)
 {
@@ -3857,6 +4446,7 @@
 		return cssid->depth;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(css_depth);
 
 bool css_is_ancestor(struct cgroup_subsys_state *child,
 		    const struct cgroup_subsys_state *root)
@@ -3893,6 +4483,7 @@
 	spin_unlock(&ss->id_lock);
 	call_rcu(&id->rcu_head, __free_css_id_cb);
 }
+EXPORT_SYMBOL_GPL(free_css_id);
 
 /*
  * This is called by init or create(). Then, calls to this function are
@@ -3942,15 +4533,14 @@
 
 }
 
-static int __init cgroup_subsys_init_idr(struct cgroup_subsys *ss)
+static int __init_or_module cgroup_init_idr(struct cgroup_subsys *ss,
+					    struct cgroup_subsys_state *rootcss)
 {
 	struct css_id *newid;
-	struct cgroup_subsys_state *rootcss;
 
 	spin_lock_init(&ss->id_lock);
 	idr_init(&ss->idr);
 
-	rootcss = init_css_set.subsys[ss->subsys_id];
 	newid = get_new_cssid(ss, 0);
 	if (IS_ERR(newid))
 		return PTR_ERR(newid);
@@ -4010,6 +4600,7 @@
 
 	return rcu_dereference(cssid->css);
 }
+EXPORT_SYMBOL_GPL(css_lookup);
 
 /**
  * css_get_next - lookup next cgroup under specified hierarchy.
diff --git a/kernel/exit.c b/kernel/exit.c
index ce1e48c..cce59cb 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -87,7 +87,7 @@
 
 	sighand = rcu_dereference_check(tsk->sighand,
 					rcu_read_lock_held() ||
-					lockdep_is_held(&tasklist_lock));
+					lockdep_tasklist_lock_is_held());
 	spin_lock(&sighand->siglock);
 
 	posix_cpu_timers_exit(tsk);
diff --git a/kernel/fork.c b/kernel/fork.c
index b0ec34a..4799c5f 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -86,7 +86,14 @@
 DEFINE_PER_CPU(unsigned long, process_counts) = 0;
 
 __cacheline_aligned DEFINE_RWLOCK(tasklist_lock);  /* outer */
-EXPORT_SYMBOL_GPL(tasklist_lock);
+
+#ifdef CONFIG_PROVE_RCU
+int lockdep_tasklist_lock_is_held(void)
+{
+	return lockdep_is_held(&tasklist_lock);
+}
+EXPORT_SYMBOL_GPL(lockdep_tasklist_lock_is_held);
+#endif /* #ifdef CONFIG_PROVE_RCU */
 
 int nr_processes(void)
 {
@@ -833,17 +840,6 @@
 	/* Thread group counters. */
 	thread_group_cputime_init(sig);
 
-	/* Expiration times and increments. */
-	sig->it[CPUCLOCK_PROF].expires = cputime_zero;
-	sig->it[CPUCLOCK_PROF].incr = cputime_zero;
-	sig->it[CPUCLOCK_VIRT].expires = cputime_zero;
-	sig->it[CPUCLOCK_VIRT].incr = cputime_zero;
-
-	/* Cached expiration times. */
-	sig->cputime_expires.prof_exp = cputime_zero;
-	sig->cputime_expires.virt_exp = cputime_zero;
-	sig->cputime_expires.sched_exp = 0;
-
 	cpu_limit = ACCESS_ONCE(sig->rlim[RLIMIT_CPU].rlim_cur);
 	if (cpu_limit != RLIM_INFINITY) {
 		sig->cputime_expires.prof_exp = secs_to_cputime(cpu_limit);
@@ -863,7 +859,7 @@
 	if (clone_flags & CLONE_THREAD)
 		return 0;
 
-	sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
+	sig = kmem_cache_zalloc(signal_cachep, GFP_KERNEL);
 	tsk->signal = sig;
 	if (!sig)
 		return -ENOMEM;
@@ -871,46 +867,21 @@
 	atomic_set(&sig->count, 1);
 	atomic_set(&sig->live, 1);
 	init_waitqueue_head(&sig->wait_chldexit);
-	sig->flags = 0;
 	if (clone_flags & CLONE_NEWPID)
 		sig->flags |= SIGNAL_UNKILLABLE;
-	sig->group_exit_code = 0;
-	sig->group_exit_task = NULL;
-	sig->group_stop_count = 0;
 	sig->curr_target = tsk;
 	init_sigpending(&sig->shared_pending);
 	INIT_LIST_HEAD(&sig->posix_timers);
 
 	hrtimer_init(&sig->real_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	sig->it_real_incr.tv64 = 0;
 	sig->real_timer.function = it_real_fn;
 
-	sig->leader = 0;	/* session leadership doesn't inherit */
-	sig->tty_old_pgrp = NULL;
-	sig->tty = NULL;
-
-	sig->utime = sig->stime = sig->cutime = sig->cstime = cputime_zero;
-	sig->gtime = cputime_zero;
-	sig->cgtime = cputime_zero;
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
-	sig->prev_utime = sig->prev_stime = cputime_zero;
-#endif
-	sig->nvcsw = sig->nivcsw = sig->cnvcsw = sig->cnivcsw = 0;
-	sig->min_flt = sig->maj_flt = sig->cmin_flt = sig->cmaj_flt = 0;
-	sig->inblock = sig->oublock = sig->cinblock = sig->coublock = 0;
-	sig->maxrss = sig->cmaxrss = 0;
-	task_io_accounting_init(&sig->ioac);
-	sig->sum_sched_runtime = 0;
-	taskstats_tgid_init(sig);
-
 	task_lock(current->group_leader);
 	memcpy(sig->rlim, current->signal->rlim, sizeof sig->rlim);
 	task_unlock(current->group_leader);
 
 	posix_cpu_timers_init_group(sig);
 
-	acct_init_pacct(&sig->pacct);
-
 	tty_audit_fork(sig);
 
 	sig->oom_adj = current->signal->oom_adj;
diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c
index 967e6614..03808ed 100644
--- a/kernel/hw_breakpoint.c
+++ b/kernel/hw_breakpoint.c
@@ -413,17 +413,17 @@
  *
  * @return a set of per_cpu pointers to perf events
  */
-struct perf_event **
+struct perf_event * __percpu *
 register_wide_hw_breakpoint(struct perf_event_attr *attr,
 			    perf_overflow_handler_t triggered)
 {
-	struct perf_event **cpu_events, **pevent, *bp;
+	struct perf_event * __percpu *cpu_events, **pevent, *bp;
 	long err;
 	int cpu;
 
 	cpu_events = alloc_percpu(typeof(*cpu_events));
 	if (!cpu_events)
-		return ERR_PTR(-ENOMEM);
+		return (void __percpu __force *)ERR_PTR(-ENOMEM);
 
 	get_online_cpus();
 	for_each_online_cpu(cpu) {
@@ -451,7 +451,7 @@
 	put_online_cpus();
 
 	free_percpu(cpu_events);
-	return ERR_PTR(err);
+	return (void __percpu __force *)ERR_PTR(err);
 }
 EXPORT_SYMBOL_GPL(register_wide_hw_breakpoint);
 
@@ -459,7 +459,7 @@
  * unregister_wide_hw_breakpoint - unregister a wide breakpoint in the kernel
  * @cpu_events: the per cpu set of events to unregister
  */
-void unregister_wide_hw_breakpoint(struct perf_event **cpu_events)
+void unregister_wide_hw_breakpoint(struct perf_event * __percpu *cpu_events)
 {
 	int cpu;
 	struct perf_event **pevent;
@@ -489,5 +489,4 @@
 	.enable		= arch_install_hw_breakpoint,
 	.disable	= arch_uninstall_hw_breakpoint,
 	.read		= hw_breakpoint_pmu_read,
-	.unthrottle	= hw_breakpoint_pmu_unthrottle
 };
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index d70394f..42ec11b 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -554,7 +554,7 @@
  *	signal. The occurence is latched into the irq controller hardware
  *	and must be acked in order to be reenabled. After the ack another
  *	interrupt can happen on the same source even before the first one
- *	is handled by the assosiacted event handler. If this happens it
+ *	is handled by the associated event handler. If this happens it
  *	might be necessary to disable (mask) the interrupt depending on the
  *	controller hardware. This requires to reenable the interrupt inside
  *	of the loop which handles the interrupts which have arrived while
diff --git a/kernel/irq/devres.c b/kernel/irq/devres.c
index d06df9c..1ef4ffc 100644
--- a/kernel/irq/devres.c
+++ b/kernel/irq/devres.c
@@ -42,7 +42,7 @@
  *	automatically freed on driver detach.
  *
  *	If an IRQ allocated with this function needs to be freed
- *	separately, dev_free_irq() must be used.
+ *	separately, devm_free_irq() must be used.
  */
 int devm_request_threaded_irq(struct device *dev, unsigned int irq,
 			      irq_handler_t handler, irq_handler_t thread_fn,
@@ -81,7 +81,7 @@
  *	Except for the extra @dev argument, this function takes the
  *	same arguments and performs the same function as free_irq().
  *	This function instead of free_irq() should be used to manually
- *	free IRQs allocated with dev_request_irq().
+ *	free IRQs allocated with devm_request_irq().
  */
 void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id)
 {
diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c
index 6b1ccc3..21fe3c4 100644
--- a/kernel/ksysfs.c
+++ b/kernel/ksysfs.c
@@ -33,7 +33,7 @@
 }
 KERNEL_ATTR_RO(uevent_seqnum);
 
-/* uevent helper program, used during early boo */
+/* uevent helper program, used during early boot */
 static ssize_t uevent_helper_show(struct kobject *kobj,
 				  struct kobj_attribute *attr, char *buf)
 {
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 0c30d04..681bc2e 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -3822,6 +3822,7 @@
 	printk("%s:%d invoked rcu_dereference_check() without protection!\n",
 			file, line);
 	printk("\nother info that might help us debug this:\n\n");
+	printk("\nrcu_scheduler_active = %d, debug_locks = %d\n", rcu_scheduler_active, debug_locks);
 	lockdep_print_held_locks(curr);
 	printk("\nstack backtrace:\n");
 	dump_stack();
diff --git a/kernel/module.c b/kernel/module.c
index e5538d5f..c968d36 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1085,6 +1085,7 @@
 		if (sattr->name == NULL)
 			goto out;
 		sect_attrs->nsections++;
+		sysfs_attr_init(&sattr->mattr.attr);
 		sattr->mattr.show = module_sect_show;
 		sattr->mattr.store = NULL;
 		sattr->mattr.attr.name = sattr->name;
@@ -1180,6 +1181,7 @@
 		if (sect_empty(&sechdrs[i]))
 			continue;
 		if (sechdrs[i].sh_type == SHT_NOTE) {
+			sysfs_bin_attr_init(nattr);
 			nattr->attr.name = mod->sect_attrs->attrs[loaded].name;
 			nattr->attr.mode = S_IRUGO;
 			nattr->size = sechdrs[i].sh_size;
@@ -1252,6 +1254,7 @@
 		if (!attr->test ||
 		    (attr->test && attr->test(mod))) {
 			memcpy(temp_attr, attr, sizeof(*temp_attr));
+			sysfs_attr_init(&temp_attr->attr);
 			error = sysfs_create_file(&mod->mkobj.kobj,&temp_attr->attr);
 			++temp_attr;
 		}
diff --git a/kernel/nsproxy.c b/kernel/nsproxy.c
index 09b4ff9..2ab6723 100644
--- a/kernel/nsproxy.c
+++ b/kernel/nsproxy.c
@@ -24,7 +24,18 @@
 
 static struct kmem_cache *nsproxy_cachep;
 
-struct nsproxy init_nsproxy = INIT_NSPROXY(init_nsproxy);
+struct nsproxy init_nsproxy = {
+	.count	= ATOMIC_INIT(1),
+	.uts_ns	= &init_uts_ns,
+#if defined(CONFIG_POSIX_MQUEUE) || defined(CONFIG_SYSVIPC)
+	.ipc_ns	= &init_ipc_ns,
+#endif
+	.mnt_ns	= NULL,
+	.pid_ns	= &init_pid_ns,
+#ifdef CONFIG_NET
+	.net_ns	= &init_net,
+#endif
+};
 
 static inline struct nsproxy *create_nsproxy(void)
 {
diff --git a/kernel/params.c b/kernel/params.c
index 8d95f54..0b30ecd 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -401,8 +401,8 @@
 }
 
 /* sysfs output in /sys/modules/XYZ/parameters/ */
-#define to_module_attr(n) container_of(n, struct module_attribute, attr);
-#define to_module_kobject(n) container_of(n, struct module_kobject, kobj);
+#define to_module_attr(n) container_of(n, struct module_attribute, attr)
+#define to_module_kobject(n) container_of(n, struct module_kobject, kobj)
 
 extern struct kernel_param __start___param[], __stop___param[];
 
@@ -420,7 +420,7 @@
 };
 
 #ifdef CONFIG_SYSFS
-#define to_param_attr(n) container_of(n, struct param_attribute, mattr);
+#define to_param_attr(n) container_of(n, struct param_attribute, mattr)
 
 static ssize_t param_attr_show(struct module_attribute *mattr,
 			       struct module *mod, char *buf)
@@ -516,6 +516,7 @@
 	new->grp.attrs = attrs;
 
 	/* Tack new one on the end. */
+	sysfs_attr_init(&new->attrs[num].mattr.attr);
 	new->attrs[num].param = kp;
 	new->attrs[num].mattr.show = param_attr_show;
 	new->attrs[num].mattr.store = param_attr_store;
@@ -722,7 +723,7 @@
 	return ret;
 }
 
-static struct sysfs_ops module_sysfs_ops = {
+static const struct sysfs_ops module_sysfs_ops = {
 	.show = module_attr_show,
 	.store = module_attr_store,
 };
@@ -736,7 +737,7 @@
 	return 0;
 }
 
-static struct kset_uevent_ops module_uevent_ops = {
+static const struct kset_uevent_ops module_uevent_ops = {
 	.filter = uevent_filter,
 };
 
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 8e352c7..4393b9e 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -56,21 +56,6 @@
  */
 int sysctl_perf_event_paranoid __read_mostly = 1;
 
-static inline bool perf_paranoid_tracepoint_raw(void)
-{
-	return sysctl_perf_event_paranoid > -1;
-}
-
-static inline bool perf_paranoid_cpu(void)
-{
-	return sysctl_perf_event_paranoid > 0;
-}
-
-static inline bool perf_paranoid_kernel(void)
-{
-	return sysctl_perf_event_paranoid > 1;
-}
-
 int sysctl_perf_event_mlock __read_mostly = 512; /* 'free' kb per user */
 
 /*
@@ -4123,8 +4108,7 @@
 	if (rctx < 0)
 		return;
 
-	data.addr = addr;
-	data.raw  = NULL;
+	perf_sample_data_init(&data, addr);
 
 	do_perf_sw_event(PERF_TYPE_SOFTWARE, event_id, nr, nmi, &data, regs);
 
@@ -4169,11 +4153,10 @@
 	struct perf_event *event;
 	u64 period;
 
-	event	= container_of(hrtimer, struct perf_event, hw.hrtimer);
+	event = container_of(hrtimer, struct perf_event, hw.hrtimer);
 	event->pmu->read(event);
 
-	data.addr = 0;
-	data.raw = NULL;
+	perf_sample_data_init(&data, 0);
 	data.period = event->hw.last_period;
 	regs = get_irq_regs();
 	/*
@@ -4337,17 +4320,15 @@
 void perf_tp_event(int event_id, u64 addr, u64 count, void *record,
 			  int entry_size)
 {
+	struct pt_regs *regs = get_irq_regs();
+	struct perf_sample_data data;
 	struct perf_raw_record raw = {
 		.size = entry_size,
 		.data = record,
 	};
 
-	struct perf_sample_data data = {
-		.addr = addr,
-		.raw = &raw,
-	};
-
-	struct pt_regs *regs = get_irq_regs();
+	perf_sample_data_init(&data, addr);
+	data.raw = &raw;
 
 	if (!regs)
 		regs = task_pt_regs(current);
@@ -4463,8 +4444,7 @@
 	struct perf_sample_data sample;
 	struct pt_regs *regs = data;
 
-	sample.raw = NULL;
-	sample.addr = bp->attr.bp_addr;
+	perf_sample_data_init(&sample, bp->attr.bp_addr);
 
 	if (!perf_exclude_event(bp, regs))
 		perf_swevent_add(bp, 1, 1, &sample, regs);
@@ -5481,13 +5461,16 @@
 	register_cpu_notifier(&perf_cpu_nb);
 }
 
-static ssize_t perf_show_reserve_percpu(struct sysdev_class *class, char *buf)
+static ssize_t perf_show_reserve_percpu(struct sysdev_class *class,
+					struct sysdev_class_attribute *attr,
+					char *buf)
 {
 	return sprintf(buf, "%d\n", perf_reserved_percpu);
 }
 
 static ssize_t
 perf_set_reserve_percpu(struct sysdev_class *class,
+			struct sysdev_class_attribute *attr,
 			const char *buf,
 			size_t count)
 {
@@ -5516,13 +5499,17 @@
 	return count;
 }
 
-static ssize_t perf_show_overcommit(struct sysdev_class *class, char *buf)
+static ssize_t perf_show_overcommit(struct sysdev_class *class,
+				    struct sysdev_class_attribute *attr,
+				    char *buf)
 {
 	return sprintf(buf, "%d\n", perf_overcommit);
 }
 
 static ssize_t
-perf_set_overcommit(struct sysdev_class *class, const char *buf, size_t count)
+perf_set_overcommit(struct sysdev_class *class,
+		    struct sysdev_class_attribute *attr,
+		    const char *buf, size_t count)
 {
 	unsigned long val;
 	int err;
diff --git a/kernel/pid.c b/kernel/pid.c
index 86b2969..aebb30d 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -367,7 +367,9 @@
 	struct task_struct *result = NULL;
 	if (pid) {
 		struct hlist_node *first;
-		first = rcu_dereference_check(pid->tasks[type].first, rcu_read_lock_held() || lockdep_is_held(&tasklist_lock));
+		first = rcu_dereference_check(pid->tasks[type].first,
+					      rcu_read_lock_held() ||
+					      lockdep_tasklist_lock_is_held());
 		if (first)
 			result = hlist_entry(first, struct task_struct, pids[(type)].node);
 	}
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index 86b3796..79aac93 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -161,13 +161,12 @@
 		rcu_read_lock();
 
 		/*
-		 * Use force_sig() since it clears SIGNAL_UNKILLABLE ensuring
-		 * any nested-container's init processes don't ignore the
-		 * signal
+		 * Any nested-container's init processes won't ignore the
+		 * SEND_SIG_NOINFO signal, see send_signal()->si_fromuser().
 		 */
 		task = pid_task(find_vpid(nr), PIDTYPE_PID);
 		if (task)
-			force_sig(SIGKILL, task);
+			send_sig_info(SIGKILL, SEND_SIG_NOINFO, task);
 
 		rcu_read_unlock();
 
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 1439eb5..4a525a3 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -246,12 +246,21 @@
 
 #define RCU_JIFFIES_TILL_FORCE_QS	 3	/* for rsp->jiffies_force_qs */
 #ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-#define RCU_SECONDS_TILL_STALL_CHECK   (10 * HZ)  /* for rsp->jiffies_stall */
-#define RCU_SECONDS_TILL_STALL_RECHECK (30 * HZ)  /* for rsp->jiffies_stall */
-#define RCU_STALL_RAT_DELAY		2	  /* Allow other CPUs time */
-						  /*  to take at least one */
-						  /*  scheduling clock irq */
-						  /*  before ratting on them. */
+
+#ifdef CONFIG_PROVE_RCU
+#define RCU_STALL_DELAY_DELTA	       (5 * HZ)
+#else
+#define RCU_STALL_DELAY_DELTA	       0
+#endif
+
+#define RCU_SECONDS_TILL_STALL_CHECK   (10 * HZ + RCU_STALL_DELAY_DELTA)
+						/* for rsp->jiffies_stall */
+#define RCU_SECONDS_TILL_STALL_RECHECK (30 * HZ + RCU_STALL_DELAY_DELTA)
+						/* for rsp->jiffies_stall */
+#define RCU_STALL_RAT_DELAY		2	/* Allow other CPUs time */
+						/*  to take at least one */
+						/*  scheduling clock irq */
+						/*  before ratting on them. */
 
 #endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
 
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index 464ad2c..79b53bd 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -1010,6 +1010,10 @@
 	int c = 0;
 	int thatcpu;
 
+	/* Check for being in the holdoff period. */
+	if (per_cpu(rcu_dyntick_holdoff, cpu) == jiffies)
+		return rcu_needs_cpu_quick_check(cpu);
+
 	/* Don't bother unless we are the last non-dyntick-idle CPU. */
 	for_each_cpu_not(thatcpu, nohz_cpu_mask)
 		if (thatcpu != cpu) {
@@ -1041,10 +1045,8 @@
 	}
 
 	/* If RCU callbacks are still pending, RCU still needs this CPU. */
-	if (c) {
+	if (c)
 		raise_softirq(RCU_SOFTIRQ);
-		per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
-	}
 	return c;
 }
 
diff --git a/kernel/sched.c b/kernel/sched.c
index b47ceee..9ab3cd7 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -2359,7 +2359,7 @@
 {
 	int cpu, orig_cpu, this_cpu, success = 0;
 	unsigned long flags;
-	struct rq *rq, *orig_rq;
+	struct rq *rq;
 
 	if (!sched_feat(SYNC_WAKEUPS))
 		wake_flags &= ~WF_SYNC;
@@ -2367,7 +2367,7 @@
 	this_cpu = get_cpu();
 
 	smp_wmb();
-	rq = orig_rq = task_rq_lock(p, &flags);
+	rq = task_rq_lock(p, &flags);
 	update_rq_clock(rq);
 	if (!(p->state & state))
 		goto out;
@@ -7406,11 +7406,13 @@
 
 #ifdef CONFIG_SCHED_MC
 static ssize_t sched_mc_power_savings_show(struct sysdev_class *class,
+					   struct sysdev_class_attribute *attr,
 					   char *page)
 {
 	return sprintf(page, "%u\n", sched_mc_power_savings);
 }
 static ssize_t sched_mc_power_savings_store(struct sysdev_class *class,
+					    struct sysdev_class_attribute *attr,
 					    const char *buf, size_t count)
 {
 	return sched_power_savings_store(buf, count, 0);
@@ -7422,11 +7424,13 @@
 
 #ifdef CONFIG_SCHED_SMT
 static ssize_t sched_smt_power_savings_show(struct sysdev_class *dev,
+					    struct sysdev_class_attribute *attr,
 					    char *page)
 {
 	return sprintf(page, "%u\n", sched_smt_power_savings);
 }
 static ssize_t sched_smt_power_savings_store(struct sysdev_class *dev,
+					     struct sysdev_class_attribute *attr,
 					     const char *buf, size_t count)
 {
 	return sched_power_savings_store(buf, count, 1);
diff --git a/kernel/sched_cpupri.c b/kernel/sched_cpupri.c
index 82095bf..fccf9fb 100644
--- a/kernel/sched_cpupri.c
+++ b/kernel/sched_cpupri.c
@@ -56,7 +56,7 @@
  * @lowest_mask: A mask to fill in with selected CPUs (or NULL)
  *
  * Note: This function returns the recommended CPUs as calculated during the
- * current invokation.  By the time the call returns, the CPUs may have in
+ * current invocation.  By the time the call returns, the CPUs may have in
  * fact changed priorities any number of times.  While not ideal, it is not
  * an issue of correctness since the normal rebalancer logic will correct
  * any discrepancies created by racing against the uncertainty of the current
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 3e1fd96..5a5ea2c 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -3476,7 +3476,7 @@
 
 static inline int on_null_domain(int cpu)
 {
-	return !rcu_dereference(cpu_rq(cpu)->sd);
+	return !rcu_dereference_sched(cpu_rq(cpu)->sd);
 }
 
 /*
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 5a6ed1f..b5b920a 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -1146,7 +1146,12 @@
 		if (next && next->prio < idx)
 			continue;
 		list_for_each_entry(rt_se, array->queue + idx, run_list) {
-			struct task_struct *p = rt_task_of(rt_se);
+			struct task_struct *p;
+
+			if (!rt_entity_is_task(rt_se))
+				continue;
+
+			p = rt_task_of(rt_se);
 			if (pick_rt_task(rq, p, cpu)) {
 				next = p;
 				break;
diff --git a/kernel/sys.c b/kernel/sys.c
index 9814e43..8298878f 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -33,6 +33,7 @@
 #include <linux/task_io_accounting_ops.h>
 #include <linux/seccomp.h>
 #include <linux/cpu.h>
+#include <linux/personality.h>
 #include <linux/ptrace.h>
 #include <linux/fs_struct.h>
 
@@ -1114,6 +1115,15 @@
 
 DECLARE_RWSEM(uts_sem);
 
+#ifdef COMPAT_UTS_MACHINE
+#define override_architecture(name) \
+	(current->personality == PER_LINUX32 && \
+	 copy_to_user(name->machine, COMPAT_UTS_MACHINE, \
+		      sizeof(COMPAT_UTS_MACHINE)))
+#else
+#define override_architecture(name)	0
+#endif
+
 SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
 {
 	int errno = 0;
@@ -1122,9 +1132,66 @@
 	if (copy_to_user(name, utsname(), sizeof *name))
 		errno = -EFAULT;
 	up_read(&uts_sem);
+
+	if (!errno && override_architecture(name))
+		errno = -EFAULT;
 	return errno;
 }
 
+#ifdef __ARCH_WANT_SYS_OLD_UNAME
+/*
+ * Old cruft
+ */
+SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
+{
+	int error = 0;
+
+	if (!name)
+		return -EFAULT;
+
+	down_read(&uts_sem);
+	if (copy_to_user(name, utsname(), sizeof(*name)))
+		error = -EFAULT;
+	up_read(&uts_sem);
+
+	if (!error && override_architecture(name))
+		error = -EFAULT;
+	return error;
+}
+
+SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
+{
+	int error;
+
+	if (!name)
+		return -EFAULT;
+	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
+		return -EFAULT;
+
+	down_read(&uts_sem);
+	error = __copy_to_user(&name->sysname, &utsname()->sysname,
+			       __OLD_UTS_LEN);
+	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
+	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
+				__OLD_UTS_LEN);
+	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
+	error |= __copy_to_user(&name->release, &utsname()->release,
+				__OLD_UTS_LEN);
+	error |= __put_user(0, name->release + __OLD_UTS_LEN);
+	error |= __copy_to_user(&name->version, &utsname()->version,
+				__OLD_UTS_LEN);
+	error |= __put_user(0, name->version + __OLD_UTS_LEN);
+	error |= __copy_to_user(&name->machine, &utsname()->machine,
+				__OLD_UTS_LEN);
+	error |= __put_user(0, name->machine + __OLD_UTS_LEN);
+	up_read(&uts_sem);
+
+	if (!error && override_architecture(name))
+		error = -EFAULT;
+	return error ? -EFAULT : 0;
+}
+#endif
+
 SYSCALL_DEFINE2(sethostname, char __user *, name, int, len)
 {
 	int errno;
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 695384f..70f2ea7 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -126,6 +126,7 @@
 cond_syscall(sys_setuid16);
 cond_syscall(sys_vm86old);
 cond_syscall(sys_vm86);
+cond_syscall(sys_ipc);
 cond_syscall(compat_sys_ipc);
 cond_syscall(compat_sys_sysctl);
 cond_syscall(sys_flock);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 0ef19c6..8686b0f 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -23,6 +23,7 @@
 #include <linux/swap.h>
 #include <linux/slab.h>
 #include <linux/sysctl.h>
+#include <linux/signal.h>
 #include <linux/proc_fs.h>
 #include <linux/security.h>
 #include <linux/ctype.h>
@@ -60,13 +61,23 @@
 #include <asm/stacktrace.h>
 #include <asm/io.h>
 #endif
+#ifdef CONFIG_BSD_PROCESS_ACCT
+#include <linux/acct.h>
+#endif
+#ifdef CONFIG_RT_MUTEXES
+#include <linux/rtmutex.h>
+#endif
+#if defined(CONFIG_PROVE_LOCKING) || defined(CONFIG_LOCK_STAT)
+#include <linux/lockdep.h>
+#endif
+#ifdef CONFIG_CHR_DEV_SG
+#include <scsi/sg.h>
+#endif
 
 
 #if defined(CONFIG_SYSCTL)
 
 /* External variables not in a header file. */
-extern int C_A_D;
-extern int print_fatal_signals;
 extern int sysctl_overcommit_memory;
 extern int sysctl_overcommit_ratio;
 extern int sysctl_panic_on_oom;
@@ -88,9 +99,6 @@
 #ifndef CONFIG_MMU
 extern int sysctl_nr_trim_pages;
 #endif
-#ifdef CONFIG_RCU_TORTURE_TEST
-extern int rcutorture_runnable;
-#endif /* #ifdef CONFIG_RCU_TORTURE_TEST */
 #ifdef CONFIG_BLOCK
 extern int blk_iopoll_enabled;
 #endif
@@ -120,14 +128,6 @@
 
 static int ngroups_max = NGROUPS_MAX;
 
-#ifdef CONFIG_MODULES
-extern char modprobe_path[];
-extern int modules_disabled;
-#endif
-#ifdef CONFIG_CHR_DEV_SG
-extern int sg_big_buff;
-#endif
-
 #ifdef CONFIG_SPARC
 #include <asm/system.h>
 #endif
@@ -149,10 +149,6 @@
 extern int spin_retry;
 #endif
 
-#ifdef CONFIG_BSD_PROCESS_ACCT
-extern int acct_parm[];
-#endif
-
 #ifdef CONFIG_IA64
 extern int no_unaligned_warning;
 extern int unaligned_dump_stack;
@@ -160,10 +156,6 @@
 
 extern struct ratelimit_state printk_ratelimit_state;
 
-#ifdef CONFIG_RT_MUTEXES
-extern int max_lock_depth;
-#endif
-
 #ifdef CONFIG_PROC_SYSCTL
 static int proc_do_cad_pid(struct ctl_table *table, int write,
 		  void __user *buffer, size_t *lenp, loff_t *ppos);
@@ -202,9 +194,6 @@
 int sysctl_legacy_va_layout;
 #endif
 
-extern int prove_locking;
-extern int lock_stat;
-
 /* The default sysctl tables: */
 
 static struct ctl_table root_table[] = {
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 1f663d2..1f5dde6 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -592,6 +592,10 @@
  */
 static int __init clocksource_done_booting(void)
 {
+	mutex_lock(&clocksource_mutex);
+	curr_clocksource = clocksource_default_clock();
+	mutex_unlock(&clocksource_mutex);
+
 	finished_booting = 1;
 
 	/*
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 8378357..d9062f5 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -27,6 +27,7 @@
 #include <linux/ctype.h>
 #include <linux/list.h>
 #include <linux/hash.h>
+#include <linux/rcupdate.h>
 
 #include <trace/events/sched.h>
 
@@ -84,22 +85,22 @@
 ftrace_func_t __ftrace_trace_function __read_mostly = ftrace_stub;
 ftrace_func_t ftrace_pid_function __read_mostly = ftrace_stub;
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-static int ftrace_set_func(unsigned long *array, int *idx, char *buffer);
-#endif
-
+/*
+ * Traverse the ftrace_list, invoking all entries.  The reason that we
+ * can use rcu_dereference_raw() is that elements removed from this list
+ * are simply leaked, so there is no need to interact with a grace-period
+ * mechanism.  The rcu_dereference_raw() calls are needed to handle
+ * concurrent insertions into the ftrace_list.
+ *
+ * Silly Alpha and silly pointer-speculation compiler optimizations!
+ */
 static void ftrace_list_func(unsigned long ip, unsigned long parent_ip)
 {
-	struct ftrace_ops *op = ftrace_list;
-
-	/* in case someone actually ports this to alpha! */
-	read_barrier_depends();
+	struct ftrace_ops *op = rcu_dereference_raw(ftrace_list); /*see above*/
 
 	while (op != &ftrace_list_end) {
-		/* silly alpha */
-		read_barrier_depends();
 		op->func(ip, parent_ip);
-		op = op->next;
+		op = rcu_dereference_raw(op->next); /*see above*/
 	};
 }
 
@@ -154,8 +155,7 @@
 	 * the ops->next pointer is valid before another CPU sees
 	 * the ops pointer included into the ftrace_list.
 	 */
-	smp_wmb();
-	ftrace_list = ops;
+	rcu_assign_pointer(ftrace_list, ops);
 
 	if (ftrace_enabled) {
 		ftrace_func_t func;
@@ -2276,6 +2276,8 @@
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 static char ftrace_graph_buf[FTRACE_FILTER_SIZE] __initdata;
+static int ftrace_set_func(unsigned long *array, int *idx, char *buffer);
+
 static int __init set_graph_function(char *str)
 {
 	strlcpy(ftrace_graph_buf, str, FTRACE_FILTER_SIZE);
@@ -3351,6 +3353,7 @@
 {
 	/* Make sure we do not use the parent ret_stack */
 	t->ret_stack = NULL;
+	t->curr_ret_stack = -1;
 
 	if (ftrace_graph_active) {
 		struct ftrace_ret_stack *ret_stack;
@@ -3360,7 +3363,6 @@
 				GFP_KERNEL);
 		if (!ret_stack)
 			return;
-		t->curr_ret_stack = -1;
 		atomic_set(&t->tracing_graph_pause, 0);
 		atomic_set(&t->trace_overrun, 0);
 		t->ftrace_timestamp = 0;
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 0287f9f..05a9f83 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2233,12 +2233,12 @@
 	if (ring_buffer_flags != RB_BUFFERS_ON)
 		return NULL;
 
-	if (atomic_read(&buffer->record_disabled))
-		return NULL;
-
 	/* If we are tracing schedule, we don't want to recurse */
 	resched = ftrace_preempt_disable();
 
+	if (atomic_read(&buffer->record_disabled))
+		goto out_nocheck;
+
 	if (trace_recursive_lock())
 		goto out_nocheck;
 
@@ -2470,11 +2470,11 @@
 	if (ring_buffer_flags != RB_BUFFERS_ON)
 		return -EBUSY;
 
-	if (atomic_read(&buffer->record_disabled))
-		return -EBUSY;
-
 	resched = ftrace_preempt_disable();
 
+	if (atomic_read(&buffer->record_disabled))
+		goto out;
+
 	cpu = raw_smp_processor_id();
 
 	if (!cpumask_test_cpu(cpu, buffer->cpumask))
@@ -2542,7 +2542,7 @@
  * @buffer: The ring buffer to enable writes
  *
  * Note, multiple disables will need the same number of enables
- * to truely enable the writing (much like preempt_disable).
+ * to truly enable the writing (much like preempt_disable).
  */
 void ring_buffer_record_enable(struct ring_buffer *buffer)
 {
@@ -2578,7 +2578,7 @@
  * @cpu: The CPU to enable.
  *
  * Note, multiple disables will need the same number of enables
- * to truely enable the writing (much like preempt_disable).
+ * to truly enable the writing (much like preempt_disable).
  */
 void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu)
 {
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index ed01fdb..3ec2ee6 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -374,6 +374,21 @@
 }
 __setup("trace_buf_size=", set_buf_size);
 
+static int __init set_tracing_thresh(char *str)
+{
+	unsigned long threshhold;
+	int ret;
+
+	if (!str)
+		return 0;
+	ret = strict_strtoul(str, 0, &threshhold);
+	if (ret < 0)
+		return 0;
+	tracing_thresh = threshhold * 1000;
+	return 1;
+}
+__setup("tracing_thresh=", set_tracing_thresh);
+
 unsigned long nsecs_to_usecs(unsigned long nsecs)
 {
 	return nsecs / 1000;
@@ -579,9 +594,10 @@
 static arch_spinlock_t ftrace_max_lock =
 	(arch_spinlock_t)__ARCH_SPIN_LOCK_UNLOCKED;
 
+unsigned long __read_mostly	tracing_thresh;
+
 #ifdef CONFIG_TRACER_MAX_TRACE
 unsigned long __read_mostly	tracing_max_latency;
-unsigned long __read_mostly	tracing_thresh;
 
 /*
  * Copy the new maximum trace into the separate maximum-trace
@@ -592,7 +608,7 @@
 __update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu)
 {
 	struct trace_array_cpu *data = tr->data[cpu];
-	struct trace_array_cpu *max_data = tr->data[cpu];
+	struct trace_array_cpu *max_data;
 
 	max_tr.cpu = cpu;
 	max_tr.time_start = data->preempt_timestamp;
@@ -602,7 +618,7 @@
 	max_data->critical_start = data->critical_start;
 	max_data->critical_end = data->critical_end;
 
-	memcpy(data->comm, tsk->comm, TASK_COMM_LEN);
+	memcpy(max_data->comm, tsk->comm, TASK_COMM_LEN);
 	max_data->pid = tsk->pid;
 	max_data->uid = task_uid(tsk);
 	max_data->nice = tsk->static_prio - 20 - MAX_RT_PRIO;
@@ -824,10 +840,10 @@
 	mutex_unlock(&trace_types_lock);
 }
 
-static void __tracing_reset(struct trace_array *tr, int cpu)
+static void __tracing_reset(struct ring_buffer *buffer, int cpu)
 {
 	ftrace_disable_cpu();
-	ring_buffer_reset_cpu(tr->buffer, cpu);
+	ring_buffer_reset_cpu(buffer, cpu);
 	ftrace_enable_cpu();
 }
 
@@ -839,7 +855,7 @@
 
 	/* Make sure all commits have finished */
 	synchronize_sched();
-	__tracing_reset(tr, cpu);
+	__tracing_reset(buffer, cpu);
 
 	ring_buffer_record_enable(buffer);
 }
@@ -857,7 +873,7 @@
 	tr->time_start = ftrace_now(tr->cpu);
 
 	for_each_online_cpu(cpu)
-		__tracing_reset(tr, cpu);
+		__tracing_reset(buffer, cpu);
 
 	ring_buffer_record_enable(buffer);
 }
@@ -934,6 +950,8 @@
 		goto out;
 	}
 
+	/* Prevent the buffers from switching */
+	arch_spin_lock(&ftrace_max_lock);
 
 	buffer = global_trace.buffer;
 	if (buffer)
@@ -943,6 +961,8 @@
 	if (buffer)
 		ring_buffer_record_enable(buffer);
 
+	arch_spin_unlock(&ftrace_max_lock);
+
 	ftrace_start();
  out:
 	spin_unlock_irqrestore(&tracing_start_lock, flags);
@@ -964,6 +984,9 @@
 	if (trace_stop_count++)
 		goto out;
 
+	/* Prevent the buffers from switching */
+	arch_spin_lock(&ftrace_max_lock);
+
 	buffer = global_trace.buffer;
 	if (buffer)
 		ring_buffer_record_disable(buffer);
@@ -972,6 +995,8 @@
 	if (buffer)
 		ring_buffer_record_disable(buffer);
 
+	arch_spin_unlock(&ftrace_max_lock);
+
  out:
 	spin_unlock_irqrestore(&tracing_start_lock, flags);
 }
@@ -1259,6 +1284,13 @@
 	if (!(trace_flags & TRACE_ITER_USERSTACKTRACE))
 		return;
 
+	/*
+	 * NMIs can not handle page faults, even with fix ups.
+	 * The save user stack can (and often does) fault.
+	 */
+	if (unlikely(in_nmi()))
+		return;
+
 	event = trace_buffer_lock_reserve(buffer, TRACE_USER_STACK,
 					  sizeof(*entry), flags, pc);
 	if (!event)
@@ -1703,6 +1735,7 @@
 
 		ftrace_enable_cpu();
 
+		iter->leftover = 0;
 		for (p = iter; p && l < *pos; p = s_next(m, p, &l))
 			;
 
@@ -4248,10 +4281,10 @@
 #ifdef CONFIG_TRACER_MAX_TRACE
 	trace_create_file("tracing_max_latency", 0644, d_tracer,
 			&tracing_max_latency, &tracing_max_lat_fops);
+#endif
 
 	trace_create_file("tracing_thresh", 0644, d_tracer,
 			&tracing_thresh, &tracing_max_lat_fops);
-#endif
 
 	trace_create_file("README", 0444, d_tracer,
 			NULL, &tracing_readme_fops);
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index fd05bca..2825ef2 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -396,9 +396,10 @@
 
 extern unsigned long nsecs_to_usecs(unsigned long nsecs);
 
+extern unsigned long tracing_thresh;
+
 #ifdef CONFIG_TRACER_MAX_TRACE
 extern unsigned long tracing_max_latency;
-extern unsigned long tracing_thresh;
 
 void update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu);
 void update_max_tr_single(struct trace_array *tr,
@@ -550,7 +551,7 @@
  * struct trace_parser - servers for reading the user input separated by spaces
  * @cont: set if the input is not complete - no final space char was found
  * @buffer: holds the parsed user input
- * @idx: user input lenght
+ * @idx: user input length
  * @size: buffer size
  */
 struct trace_parser {
diff --git a/kernel/trace/trace_clock.c b/kernel/trace/trace_clock.c
index 84a3a7b..6fbfb8f 100644
--- a/kernel/trace/trace_clock.c
+++ b/kernel/trace/trace_clock.c
@@ -13,6 +13,7 @@
  * Tracer plugins will chose a default from these clocks.
  */
 #include <linux/spinlock.h>
+#include <linux/irqflags.h>
 #include <linux/hardirq.h>
 #include <linux/module.h>
 #include <linux/percpu.h>
diff --git a/kernel/trace/trace_event_profile.c b/kernel/trace/trace_event_profile.c
index f0d6930..c1cc3ab 100644
--- a/kernel/trace/trace_event_profile.c
+++ b/kernel/trace/trace_event_profile.c
@@ -138,9 +138,9 @@
 	cpu = smp_processor_id();
 
 	if (in_nmi())
-		trace_buf = rcu_dereference(perf_trace_buf_nmi);
+		trace_buf = rcu_dereference_sched(perf_trace_buf_nmi);
 	else
-		trace_buf = rcu_dereference(perf_trace_buf);
+		trace_buf = rcu_dereference_sched(perf_trace_buf);
 
 	if (!trace_buf)
 		goto err;
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index 3fc2a57..e6989d9 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -237,6 +237,14 @@
 	return ret;
 }
 
+int trace_graph_thresh_entry(struct ftrace_graph_ent *trace)
+{
+	if (tracing_thresh)
+		return 1;
+	else
+		return trace_graph_entry(trace);
+}
+
 static void __trace_graph_return(struct trace_array *tr,
 				struct ftrace_graph_ret *trace,
 				unsigned long flags,
@@ -290,13 +298,26 @@
 	smp_mb();
 }
 
+void trace_graph_thresh_return(struct ftrace_graph_ret *trace)
+{
+	if (tracing_thresh &&
+	    (trace->rettime - trace->calltime < tracing_thresh))
+		return;
+	else
+		trace_graph_return(trace);
+}
+
 static int graph_trace_init(struct trace_array *tr)
 {
 	int ret;
 
 	set_graph_array(tr);
-	ret = register_ftrace_graph(&trace_graph_return,
-				    &trace_graph_entry);
+	if (tracing_thresh)
+		ret = register_ftrace_graph(&trace_graph_thresh_return,
+					    &trace_graph_thresh_entry);
+	else
+		ret = register_ftrace_graph(&trace_graph_return,
+					    &trace_graph_entry);
 	if (ret)
 		return ret;
 	tracing_start_cmdline_record();
@@ -920,7 +941,7 @@
 		if (!ret)
 			return TRACE_TYPE_PARTIAL_LINE;
 	} else {
-		ret = trace_seq_printf(s, "} (%ps)\n", (void *)trace->func);
+		ret = trace_seq_printf(s, "} /* %ps */\n", (void *)trace->func);
 		if (!ret)
 			return TRACE_TYPE_PARTIAL_LINE;
 	}
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index b520ec1..8e5ec5e 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -532,6 +532,14 @@
 
 	 For more details, see Documentation/lockstat.txt
 
+	 This also enables lock events required by "perf lock",
+	 subcommand of perf.
+	 If you want to use "perf lock", you also need to turn on
+	 CONFIG_EVENT_TRACING.
+
+	 CONFIG_LOCK_STAT defines "contended" and "acquired" lock events.
+	 (CONFIG_LOCKDEP defines "acquire" and "release" events.)
+
 config DEBUG_LOCKDEP
 	bool "Lock dependency engine debugging"
 	depends on DEBUG_KERNEL && LOCKDEP
diff --git a/lib/kobject.c b/lib/kobject.c
index b512b74..8115eb1 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -700,7 +700,7 @@
 	return ret;
 }
 
-struct sysfs_ops kobj_sysfs_ops = {
+const struct sysfs_ops kobj_sysfs_ops = {
 	.show	= kobj_attr_show,
 	.store	= kobj_attr_store,
 };
@@ -789,7 +789,7 @@
  * If the kset was not able to be created, NULL will be returned.
  */
 static struct kset *kset_create(const char *name,
-				struct kset_uevent_ops *uevent_ops,
+				const struct kset_uevent_ops *uevent_ops,
 				struct kobject *parent_kobj)
 {
 	struct kset *kset;
@@ -832,7 +832,7 @@
  * If the kset was not able to be created, NULL will be returned.
  */
 struct kset *kset_create_and_add(const char *name,
-				 struct kset_uevent_ops *uevent_ops,
+				 const struct kset_uevent_ops *uevent_ops,
 				 struct kobject *parent_kobj)
 {
 	struct kset *kset;
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 920a3ca..c9d3a3e 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -95,7 +95,7 @@
 	const char *subsystem;
 	struct kobject *top_kobj;
 	struct kset *kset;
-	struct kset_uevent_ops *uevent_ops;
+	const struct kset_uevent_ops *uevent_ops;
 	u64 seq;
 	int i = 0;
 	int retval = 0;
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 0d461c7..24112e5 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -609,6 +609,12 @@
 		.precision = -1,
 		.flags = SPECIAL | SMALL | ZEROPAD,
 	};
+	static const struct printf_spec bus_spec = {
+		.base = 16,
+		.field_width = 2,
+		.precision = -1,
+		.flags = SMALL | ZEROPAD,
+	};
 	static const struct printf_spec dec_spec = {
 		.base = 10,
 		.precision = -1,
@@ -629,7 +635,7 @@
 	 * 64-bit res (sizeof==8): 20 chars in dec, 18 in hex ("0x" + 16) */
 #define RSRC_BUF_SIZE		((2 * sizeof(resource_size_t)) + 4)
 #define FLAG_BUF_SIZE		(2 * sizeof(res->flags))
-#define DECODED_BUF_SIZE	sizeof("[mem - 64bit pref disabled]")
+#define DECODED_BUF_SIZE	sizeof("[mem - 64bit pref window disabled]")
 #define RAW_BUF_SIZE		sizeof("[mem - flags 0x]")
 	char sym[max(2*RSRC_BUF_SIZE + DECODED_BUF_SIZE,
 		     2*RSRC_BUF_SIZE + FLAG_BUF_SIZE + RAW_BUF_SIZE)];
@@ -651,6 +657,9 @@
 	} else if (res->flags & IORESOURCE_DMA) {
 		p = string(p, pend, "dma ", str_spec);
 		specp = &dec_spec;
+	} else if (res->flags & IORESOURCE_BUS) {
+		p = string(p, pend, "bus ", str_spec);
+		specp = &bus_spec;
 	} else {
 		p = string(p, pend, "??? ", str_spec);
 		specp = &mem_spec;
@@ -666,6 +675,8 @@
 			p = string(p, pend, " 64bit", str_spec);
 		if (res->flags & IORESOURCE_PREFETCH)
 			p = string(p, pend, " pref", str_spec);
+		if (res->flags & IORESOURCE_WINDOW)
+			p = string(p, pend, " window", str_spec);
 		if (res->flags & IORESOURCE_DISABLED)
 			p = string(p, pend, " disabled", str_spec);
 	} else {
diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c
index 215447c..2c13ecc 100644
--- a/lib/zlib_inflate/inffast.c
+++ b/lib/zlib_inflate/inffast.c
@@ -8,21 +8,6 @@
 #include "inflate.h"
 #include "inffast.h"
 
-/* Only do the unaligned "Faster" variant when
- * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set
- *
- * On powerpc, it won't be as we don't include autoconf.h
- * automatically for the boot wrapper, which is intended as
- * we run in an environment where we may not be able to deal
- * with (even rare) alignment faults. In addition, we do not
- * define __KERNEL__ for arch/powerpc/boot unlike x86
- */
-
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-#include <asm/unaligned.h>
-#include <asm/byteorder.h>
-#endif
-
 #ifndef ASMINF
 
 /* Allow machine dependent optimization for post-increment or pre-increment.
@@ -36,14 +21,31 @@
    - Pentium III (Anderson)
    - M68060 (Nikl)
  */
+union uu {
+	unsigned short us;
+	unsigned char b[2];
+};
+
+/* Endian independed version */
+static inline unsigned short
+get_unaligned16(const unsigned short *p)
+{
+	union uu  mm;
+	unsigned char *b = (unsigned char *)p;
+
+	mm.b[0] = b[0];
+	mm.b[1] = b[1];
+	return mm.us;
+}
+
 #ifdef POSTINC
 #  define OFF 0
 #  define PUP(a) *(a)++
-#  define UP_UNALIGNED(a) get_unaligned((a)++)
+#  define UP_UNALIGNED(a) get_unaligned16((a)++)
 #else
 #  define OFF 1
 #  define PUP(a) *++(a)
-#  define UP_UNALIGNED(a) get_unaligned(++(a))
+#  define UP_UNALIGNED(a) get_unaligned16(++(a))
 #endif
 
 /*
@@ -256,7 +258,6 @@
                     }
                 }
                 else {
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 		    unsigned short *sout;
 		    unsigned long loops;
 
@@ -274,22 +275,25 @@
 			sfrom = (unsigned short *)(from - OFF);
 			loops = len >> 1;
 			do
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+			    PUP(sout) = PUP(sfrom);
+#else
 			    PUP(sout) = UP_UNALIGNED(sfrom);
+#endif
 			while (--loops);
 			out = (unsigned char *)sout + OFF;
 			from = (unsigned char *)sfrom + OFF;
 		    } else { /* dist == 1 or dist == 2 */
 			unsigned short pat16;
 
-			pat16 = *(sout-2+2*OFF);
-			if (dist == 1)
-#if defined(__BIG_ENDIAN)
-			    pat16 = (pat16 & 0xff) | ((pat16 & 0xff) << 8);
-#elif defined(__LITTLE_ENDIAN)
-			    pat16 = (pat16 & 0xff00) | ((pat16 & 0xff00) >> 8);
-#else
-#error __BIG_ENDIAN nor __LITTLE_ENDIAN is defined
-#endif
+			pat16 = *(sout-1+OFF);
+			if (dist == 1) {
+				union uu mm;
+				/* copy one char pattern to both bytes */
+				mm.us = pat16;
+				mm.b[0] = mm.b[1];
+				pat16 = mm.us;
+			}
 			loops = len >> 1;
 			do
 			    PUP(sout) = pat16;
@@ -298,20 +302,6 @@
 		    }
 		    if (len & 1)
 			PUP(out) = PUP(from);
-#else /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
-                    from = out - dist;          /* copy direct from output */
-                    do {                        /* minimum length is three */
-			 PUP(out) = PUP(from);
-			 PUP(out) = PUP(from);
-			 PUP(out) = PUP(from);
-			 len -= 3;
-                    } while (len > 2);
-                    if (len) {
-			 PUP(out) = PUP(from);
-			 if (len > 1)
-			     PUP(out) = PUP(from);
-                    }
-#endif /* !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
                 }
             }
             else if ((op & 64) == 0) {          /* 2nd level distance code */
diff --git a/mm/highmem.c b/mm/highmem.c
index 9c1e627..bed8a8b 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -220,7 +220,7 @@
  * @page: &struct page to pin
  *
  * Returns the page's current virtual memory address, or NULL if no mapping
- * exists.  When and only when a non null address is returned then a
+ * exists.  If and only if a non null address is returned then a
  * matching call to kunmap_high() is necessary.
  *
  * This can be called from any context.
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index d813823..7973b52 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -6,6 +6,10 @@
  * Copyright 2007 OpenVZ SWsoft Inc
  * Author: Pavel Emelianov <xemul@openvz.org>
  *
+ * Memory thresholds
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Kirill A. Shutemov
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -21,6 +25,7 @@
 #include <linux/memcontrol.h>
 #include <linux/cgroup.h>
 #include <linux/mm.h>
+#include <linux/hugetlb.h>
 #include <linux/pagemap.h>
 #include <linux/smp.h>
 #include <linux/page-flags.h>
@@ -32,7 +37,10 @@
 #include <linux/rbtree.h>
 #include <linux/slab.h>
 #include <linux/swap.h>
+#include <linux/swapops.h>
 #include <linux/spinlock.h>
+#include <linux/eventfd.h>
+#include <linux/sort.h>
 #include <linux/fs.h>
 #include <linux/seq_file.h>
 #include <linux/vmalloc.h>
@@ -55,7 +63,15 @@
 #define do_swap_account		(0)
 #endif
 
-#define SOFTLIMIT_EVENTS_THRESH (1000)
+/*
+ * Per memcg event counter is incremented at every pagein/pageout. This counter
+ * is used for trigger some periodic events. This is straightforward and better
+ * than using jiffies etc. to handle periodic memcg event.
+ *
+ * These values will be used as !((event) & ((1 <<(thresh)) - 1))
+ */
+#define THRESHOLDS_EVENTS_THRESH (7) /* once in 128 */
+#define SOFTLIMIT_EVENTS_THRESH (10) /* once in 1024 */
 
 /*
  * Statistics for memory cgroup.
@@ -69,62 +85,16 @@
 	MEM_CGROUP_STAT_FILE_MAPPED,  /* # of pages charged as file rss */
 	MEM_CGROUP_STAT_PGPGIN_COUNT,	/* # of pages paged in */
 	MEM_CGROUP_STAT_PGPGOUT_COUNT,	/* # of pages paged out */
-	MEM_CGROUP_STAT_EVENTS,	/* sum of pagein + pageout for internal use */
 	MEM_CGROUP_STAT_SWAPOUT, /* # of pages, swapped out */
+	MEM_CGROUP_EVENTS,	/* incremented at every  pagein/pageout */
 
 	MEM_CGROUP_STAT_NSTATS,
 };
 
 struct mem_cgroup_stat_cpu {
 	s64 count[MEM_CGROUP_STAT_NSTATS];
-} ____cacheline_aligned_in_smp;
-
-struct mem_cgroup_stat {
-	struct mem_cgroup_stat_cpu cpustat[0];
 };
 
-static inline void
-__mem_cgroup_stat_reset_safe(struct mem_cgroup_stat_cpu *stat,
-				enum mem_cgroup_stat_index idx)
-{
-	stat->count[idx] = 0;
-}
-
-static inline s64
-__mem_cgroup_stat_read_local(struct mem_cgroup_stat_cpu *stat,
-				enum mem_cgroup_stat_index idx)
-{
-	return stat->count[idx];
-}
-
-/*
- * For accounting under irq disable, no need for increment preempt count.
- */
-static inline void __mem_cgroup_stat_add_safe(struct mem_cgroup_stat_cpu *stat,
-		enum mem_cgroup_stat_index idx, int val)
-{
-	stat->count[idx] += val;
-}
-
-static s64 mem_cgroup_read_stat(struct mem_cgroup_stat *stat,
-		enum mem_cgroup_stat_index idx)
-{
-	int cpu;
-	s64 ret = 0;
-	for_each_possible_cpu(cpu)
-		ret += stat->cpustat[cpu].count[idx];
-	return ret;
-}
-
-static s64 mem_cgroup_local_usage(struct mem_cgroup_stat *stat)
-{
-	s64 ret;
-
-	ret = mem_cgroup_read_stat(stat, MEM_CGROUP_STAT_CACHE);
-	ret += mem_cgroup_read_stat(stat, MEM_CGROUP_STAT_RSS);
-	return ret;
-}
-
 /*
  * per-zone information in memory controller.
  */
@@ -174,6 +144,22 @@
 
 static struct mem_cgroup_tree soft_limit_tree __read_mostly;
 
+struct mem_cgroup_threshold {
+	struct eventfd_ctx *eventfd;
+	u64 threshold;
+};
+
+struct mem_cgroup_threshold_ary {
+	/* An array index points to threshold just below usage. */
+	atomic_t current_threshold;
+	/* Size of entries[] */
+	unsigned int size;
+	/* Array of thresholds */
+	struct mem_cgroup_threshold entries[0];
+};
+
+static void mem_cgroup_threshold(struct mem_cgroup *mem);
+
 /*
  * The memory controller data structure. The memory controller controls both
  * page cache and RSS per cgroup. We would eventually like to provide
@@ -217,7 +203,7 @@
 	 * Should the accounting and control be hierarchical, per subtree?
 	 */
 	bool use_hierarchy;
-	unsigned long	last_oom_jiffies;
+	atomic_t	oom_lock;
 	atomic_t	refcnt;
 
 	unsigned int	swappiness;
@@ -225,10 +211,48 @@
 	/* set when res.limit == memsw.limit */
 	bool		memsw_is_minimum;
 
+	/* protect arrays of thresholds */
+	struct mutex thresholds_lock;
+
+	/* thresholds for memory usage. RCU-protected */
+	struct mem_cgroup_threshold_ary *thresholds;
+
+	/* thresholds for mem+swap usage. RCU-protected */
+	struct mem_cgroup_threshold_ary *memsw_thresholds;
+
 	/*
-	 * statistics. This must be placed at the end of memcg.
+	 * Should we move charges of a task when a task is moved into this
+	 * mem_cgroup ? And what type of charges should we move ?
 	 */
-	struct mem_cgroup_stat stat;
+	unsigned long 	move_charge_at_immigrate;
+
+	/*
+	 * percpu counter.
+	 */
+	struct mem_cgroup_stat_cpu *stat;
+};
+
+/* Stuffs for move charges at task migration. */
+/*
+ * Types of charges to be moved. "move_charge_at_immitgrate" is treated as a
+ * left-shifted bitmap of these types.
+ */
+enum move_type {
+	MOVE_CHARGE_TYPE_ANON,	/* private anonymous page and swap of it */
+	NR_MOVE_TYPE,
+};
+
+/* "mc" and its members are protected by cgroup_mutex */
+static struct move_charge_struct {
+	struct mem_cgroup *from;
+	struct mem_cgroup *to;
+	unsigned long precharge;
+	unsigned long moved_charge;
+	unsigned long moved_swap;
+	struct task_struct *moving_task;	/* a task moving charges */
+	wait_queue_head_t waitq;		/* a waitq for other context */
+} mc = {
+	.waitq = __WAIT_QUEUE_HEAD_INITIALIZER(mc.waitq),
 };
 
 /*
@@ -371,23 +395,6 @@
 	spin_unlock(&mctz->lock);
 }
 
-static bool mem_cgroup_soft_limit_check(struct mem_cgroup *mem)
-{
-	bool ret = false;
-	int cpu;
-	s64 val;
-	struct mem_cgroup_stat_cpu *cpustat;
-
-	cpu = get_cpu();
-	cpustat = &mem->stat.cpustat[cpu];
-	val = __mem_cgroup_stat_read_local(cpustat, MEM_CGROUP_STAT_EVENTS);
-	if (unlikely(val > SOFTLIMIT_EVENTS_THRESH)) {
-		__mem_cgroup_stat_reset_safe(cpustat, MEM_CGROUP_STAT_EVENTS);
-		ret = true;
-	}
-	put_cpu();
-	return ret;
-}
 
 static void mem_cgroup_update_tree(struct mem_cgroup *mem, struct page *page)
 {
@@ -481,17 +488,31 @@
 	return mz;
 }
 
+static s64 mem_cgroup_read_stat(struct mem_cgroup *mem,
+		enum mem_cgroup_stat_index idx)
+{
+	int cpu;
+	s64 val = 0;
+
+	for_each_possible_cpu(cpu)
+		val += per_cpu(mem->stat->count[idx], cpu);
+	return val;
+}
+
+static s64 mem_cgroup_local_usage(struct mem_cgroup *mem)
+{
+	s64 ret;
+
+	ret = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_RSS);
+	ret += mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_CACHE);
+	return ret;
+}
+
 static void mem_cgroup_swap_statistics(struct mem_cgroup *mem,
 					 bool charge)
 {
 	int val = (charge) ? 1 : -1;
-	struct mem_cgroup_stat *stat = &mem->stat;
-	struct mem_cgroup_stat_cpu *cpustat;
-	int cpu = get_cpu();
-
-	cpustat = &stat->cpustat[cpu];
-	__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_SWAPOUT, val);
-	put_cpu();
+	this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_SWAPOUT], val);
 }
 
 static void mem_cgroup_charge_statistics(struct mem_cgroup *mem,
@@ -499,24 +520,21 @@
 					 bool charge)
 {
 	int val = (charge) ? 1 : -1;
-	struct mem_cgroup_stat *stat = &mem->stat;
-	struct mem_cgroup_stat_cpu *cpustat;
-	int cpu = get_cpu();
 
-	cpustat = &stat->cpustat[cpu];
+	preempt_disable();
+
 	if (PageCgroupCache(pc))
-		__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_CACHE, val);
+		__this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_CACHE], val);
 	else
-		__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_RSS, val);
+		__this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_RSS], val);
 
 	if (charge)
-		__mem_cgroup_stat_add_safe(cpustat,
-				MEM_CGROUP_STAT_PGPGIN_COUNT, 1);
+		__this_cpu_inc(mem->stat->count[MEM_CGROUP_STAT_PGPGIN_COUNT]);
 	else
-		__mem_cgroup_stat_add_safe(cpustat,
-				MEM_CGROUP_STAT_PGPGOUT_COUNT, 1);
-	__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_EVENTS, 1);
-	put_cpu();
+		__this_cpu_inc(mem->stat->count[MEM_CGROUP_STAT_PGPGOUT_COUNT]);
+	__this_cpu_inc(mem->stat->count[MEM_CGROUP_EVENTS]);
+
+	preempt_enable();
 }
 
 static unsigned long mem_cgroup_get_local_zonestat(struct mem_cgroup *mem,
@@ -534,6 +552,29 @@
 	return total;
 }
 
+static bool __memcg_event_check(struct mem_cgroup *mem, int event_mask_shift)
+{
+	s64 val;
+
+	val = this_cpu_read(mem->stat->count[MEM_CGROUP_EVENTS]);
+
+	return !(val & ((1 << event_mask_shift) - 1));
+}
+
+/*
+ * Check events in order.
+ *
+ */
+static void memcg_check_events(struct mem_cgroup *mem, struct page *page)
+{
+	/* threshold event is triggered in finer grain than soft limit */
+	if (unlikely(__memcg_event_check(mem, THRESHOLDS_EVENTS_THRESH))) {
+		mem_cgroup_threshold(mem);
+		if (unlikely(__memcg_event_check(mem, SOFTLIMIT_EVENTS_THRESH)))
+			mem_cgroup_update_tree(mem, page);
+	}
+}
+
 static struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont)
 {
 	return container_of(cgroup_subsys_state(cont,
@@ -1000,7 +1041,7 @@
 }
 
 /**
- * mem_cgroup_print_mem_info: Called from OOM with tasklist_lock held in read mode.
+ * mem_cgroup_print_oom_info: Called from OOM with tasklist_lock held in read mode.
  * @memcg: The memory cgroup that went over limit
  * @p: Task that is going to be killed
  *
@@ -1174,7 +1215,7 @@
 				}
 			}
 		}
-		if (!mem_cgroup_local_usage(&victim->stat)) {
+		if (!mem_cgroup_local_usage(victim)) {
 			/* this cgroup's local usage == 0 */
 			css_put(&victim->css);
 			continue;
@@ -1205,32 +1246,102 @@
 	return total;
 }
 
-bool mem_cgroup_oom_called(struct task_struct *task)
+static int mem_cgroup_oom_lock_cb(struct mem_cgroup *mem, void *data)
 {
-	bool ret = false;
-	struct mem_cgroup *mem;
-	struct mm_struct *mm;
+	int *val = (int *)data;
+	int x;
+	/*
+	 * Logically, we can stop scanning immediately when we find
+	 * a memcg is already locked. But condidering unlock ops and
+	 * creation/removal of memcg, scan-all is simple operation.
+	 */
+	x = atomic_inc_return(&mem->oom_lock);
+	*val = max(x, *val);
+	return 0;
+}
+/*
+ * Check OOM-Killer is already running under our hierarchy.
+ * If someone is running, return false.
+ */
+static bool mem_cgroup_oom_lock(struct mem_cgroup *mem)
+{
+	int lock_count = 0;
 
-	rcu_read_lock();
-	mm = task->mm;
-	if (!mm)
-		mm = &init_mm;
-	mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
-	if (mem && time_before(jiffies, mem->last_oom_jiffies + HZ/10))
-		ret = true;
-	rcu_read_unlock();
-	return ret;
+	mem_cgroup_walk_tree(mem, &lock_count, mem_cgroup_oom_lock_cb);
+
+	if (lock_count == 1)
+		return true;
+	return false;
 }
 
-static int record_last_oom_cb(struct mem_cgroup *mem, void *data)
+static int mem_cgroup_oom_unlock_cb(struct mem_cgroup *mem, void *data)
 {
-	mem->last_oom_jiffies = jiffies;
+	/*
+	 * When a new child is created while the hierarchy is under oom,
+	 * mem_cgroup_oom_lock() may not be called. We have to use
+	 * atomic_add_unless() here.
+	 */
+	atomic_add_unless(&mem->oom_lock, -1, 0);
 	return 0;
 }
 
-static void record_last_oom(struct mem_cgroup *mem)
+static void mem_cgroup_oom_unlock(struct mem_cgroup *mem)
 {
-	mem_cgroup_walk_tree(mem, NULL, record_last_oom_cb);
+	mem_cgroup_walk_tree(mem, NULL,	mem_cgroup_oom_unlock_cb);
+}
+
+static DEFINE_MUTEX(memcg_oom_mutex);
+static DECLARE_WAIT_QUEUE_HEAD(memcg_oom_waitq);
+
+/*
+ * try to call OOM killer. returns false if we should exit memory-reclaim loop.
+ */
+bool mem_cgroup_handle_oom(struct mem_cgroup *mem, gfp_t mask)
+{
+	DEFINE_WAIT(wait);
+	bool locked;
+
+	/* At first, try to OOM lock hierarchy under mem.*/
+	mutex_lock(&memcg_oom_mutex);
+	locked = mem_cgroup_oom_lock(mem);
+	/*
+	 * Even if signal_pending(), we can't quit charge() loop without
+	 * accounting. So, UNINTERRUPTIBLE is appropriate. But SIGKILL
+	 * under OOM is always welcomed, use TASK_KILLABLE here.
+	 */
+	if (!locked)
+		prepare_to_wait(&memcg_oom_waitq, &wait, TASK_KILLABLE);
+	mutex_unlock(&memcg_oom_mutex);
+
+	if (locked)
+		mem_cgroup_out_of_memory(mem, mask);
+	else {
+		schedule();
+		finish_wait(&memcg_oom_waitq, &wait);
+	}
+	mutex_lock(&memcg_oom_mutex);
+	mem_cgroup_oom_unlock(mem);
+	/*
+	 * Here, we use global waitq .....more fine grained waitq ?
+	 * Assume following hierarchy.
+	 * A/
+	 *   01
+	 *   02
+	 * assume OOM happens both in A and 01 at the same time. Tthey are
+	 * mutually exclusive by lock. (kill in 01 helps A.)
+	 * When we use per memcg waitq, we have to wake up waiters on A and 02
+	 * in addtion to waiters on 01. We use global waitq for avoiding mess.
+	 * It will not be a big problem.
+	 * (And a task may be moved to other groups while it's waiting for OOM.)
+	 */
+	wake_up_all(&memcg_oom_waitq);
+	mutex_unlock(&memcg_oom_mutex);
+
+	if (test_thread_flag(TIF_MEMDIE) || fatal_signal_pending(current))
+		return false;
+	/* Give chance to dying process */
+	schedule_timeout(1);
+	return true;
 }
 
 /*
@@ -1240,9 +1351,6 @@
 void mem_cgroup_update_file_mapped(struct page *page, int val)
 {
 	struct mem_cgroup *mem;
-	struct mem_cgroup_stat *stat;
-	struct mem_cgroup_stat_cpu *cpustat;
-	int cpu;
 	struct page_cgroup *pc;
 
 	pc = lookup_page_cgroup(page);
@@ -1258,13 +1366,10 @@
 		goto done;
 
 	/*
-	 * Preemption is already disabled, we don't need get_cpu()
+	 * Preemption is already disabled. We can use __this_cpu_xxx
 	 */
-	cpu = smp_processor_id();
-	stat = &mem->stat;
-	cpustat = &stat->cpustat[cpu];
+	__this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_FILE_MAPPED], val);
 
-	__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_FILE_MAPPED, val);
 done:
 	unlock_page_cgroup(pc);
 }
@@ -1401,19 +1506,21 @@
  * oom-killer can be invoked.
  */
 static int __mem_cgroup_try_charge(struct mm_struct *mm,
-			gfp_t gfp_mask, struct mem_cgroup **memcg,
-			bool oom, struct page *page)
+			gfp_t gfp_mask, struct mem_cgroup **memcg, bool oom)
 {
 	struct mem_cgroup *mem, *mem_over_limit;
 	int nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
 	struct res_counter *fail_res;
 	int csize = CHARGE_SIZE;
 
-	if (unlikely(test_thread_flag(TIF_MEMDIE))) {
-		/* Don't account this! */
-		*memcg = NULL;
-		return 0;
-	}
+	/*
+	 * Unlike gloval-vm's OOM-kill, we're not in memory shortage
+	 * in system level. So, allow to go ahead dying process in addition to
+	 * MEMDIE process.
+	 */
+	if (unlikely(test_thread_flag(TIF_MEMDIE)
+		     || fatal_signal_pending(current)))
+		goto bypass;
 
 	/*
 	 * We always charge the cgroup the mm_struct belongs to.
@@ -1440,7 +1547,7 @@
 		unsigned long flags = 0;
 
 		if (consume_stock(mem))
-			goto charged;
+			goto done;
 
 		ret = res_counter_charge(&mem->res, csize, &fail_res);
 		if (likely(!ret)) {
@@ -1483,28 +1590,70 @@
 		if (mem_cgroup_check_under_limit(mem_over_limit))
 			continue;
 
-		if (!nr_retries--) {
-			if (oom) {
-				mem_cgroup_out_of_memory(mem_over_limit, gfp_mask);
-				record_last_oom(mem_over_limit);
+		/* try to avoid oom while someone is moving charge */
+		if (mc.moving_task && current != mc.moving_task) {
+			struct mem_cgroup *from, *to;
+			bool do_continue = false;
+			/*
+			 * There is a small race that "from" or "to" can be
+			 * freed by rmdir, so we use css_tryget().
+			 */
+			rcu_read_lock();
+			from = mc.from;
+			to = mc.to;
+			if (from && css_tryget(&from->css)) {
+				if (mem_over_limit->use_hierarchy)
+					do_continue = css_is_ancestor(
+							&from->css,
+							&mem_over_limit->css);
+				else
+					do_continue = (from == mem_over_limit);
+				css_put(&from->css);
 			}
-			goto nomem;
+			if (!do_continue && to && css_tryget(&to->css)) {
+				if (mem_over_limit->use_hierarchy)
+					do_continue = css_is_ancestor(
+							&to->css,
+							&mem_over_limit->css);
+				else
+					do_continue = (to == mem_over_limit);
+				css_put(&to->css);
+			}
+			rcu_read_unlock();
+			if (do_continue) {
+				DEFINE_WAIT(wait);
+				prepare_to_wait(&mc.waitq, &wait,
+							TASK_INTERRUPTIBLE);
+				/* moving charge context might have finished. */
+				if (mc.moving_task)
+					schedule();
+				finish_wait(&mc.waitq, &wait);
+				continue;
+			}
+		}
+
+		if (!nr_retries--) {
+			if (!oom)
+				goto nomem;
+			if (mem_cgroup_handle_oom(mem_over_limit, gfp_mask)) {
+				nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
+				continue;
+			}
+			/* When we reach here, current task is dying .*/
+			css_put(&mem->css);
+			goto bypass;
 		}
 	}
 	if (csize > PAGE_SIZE)
 		refill_stock(mem, csize - PAGE_SIZE);
-charged:
-	/*
-	 * Insert ancestor (and ancestor's ancestors), to softlimit RB-tree.
-	 * if they exceeds softlimit.
-	 */
-	if (mem_cgroup_soft_limit_check(mem))
-		mem_cgroup_update_tree(mem, page);
 done:
 	return 0;
 nomem:
 	css_put(&mem->css);
 	return -ENOMEM;
+bypass:
+	*memcg = NULL;
+	return 0;
 }
 
 /*
@@ -1512,14 +1661,23 @@
  * This function is for that and do uncharge, put css's refcnt.
  * gotten by try_charge().
  */
-static void mem_cgroup_cancel_charge(struct mem_cgroup *mem)
+static void __mem_cgroup_cancel_charge(struct mem_cgroup *mem,
+							unsigned long count)
 {
 	if (!mem_cgroup_is_root(mem)) {
-		res_counter_uncharge(&mem->res, PAGE_SIZE);
+		res_counter_uncharge(&mem->res, PAGE_SIZE * count);
 		if (do_swap_account)
-			res_counter_uncharge(&mem->memsw, PAGE_SIZE);
+			res_counter_uncharge(&mem->memsw, PAGE_SIZE * count);
+		VM_BUG_ON(test_bit(CSS_ROOT, &mem->css.flags));
+		WARN_ON_ONCE(count > INT_MAX);
+		__css_put(&mem->css, (int)count);
 	}
-	css_put(&mem->css);
+	/* we don't need css_put for root */
+}
+
+static void mem_cgroup_cancel_charge(struct mem_cgroup *mem)
+{
+	__mem_cgroup_cancel_charge(mem, 1);
 }
 
 /*
@@ -1615,6 +1773,12 @@
 	mem_cgroup_charge_statistics(mem, pc, true);
 
 	unlock_page_cgroup(pc);
+	/*
+	 * "charge_statistics" updated event counter. Then, check it.
+	 * Insert ancestor (and ancestor's ancestors), to softlimit RB-tree.
+	 * if they exceeds softlimit.
+	 */
+	memcg_check_events(mem, pc->page);
 }
 
 /**
@@ -1622,22 +1786,22 @@
  * @pc:	page_cgroup of the page.
  * @from: mem_cgroup which the page is moved from.
  * @to:	mem_cgroup which the page is moved to. @from != @to.
+ * @uncharge: whether we should call uncharge and css_put against @from.
  *
  * The caller must confirm following.
  * - page is not on LRU (isolate_page() is useful.)
  * - the pc is locked, used, and ->mem_cgroup points to @from.
  *
- * This function does "uncharge" from old cgroup but doesn't do "charge" to
- * new cgroup. It should be done by a caller.
+ * This function doesn't do "charge" nor css_get to new cgroup. It should be
+ * done by a caller(__mem_cgroup_try_charge would be usefull). If @uncharge is
+ * true, this function does "uncharge" from old cgroup, but it doesn't if
+ * @uncharge is false, so a caller should do "uncharge".
  */
 
 static void __mem_cgroup_move_account(struct page_cgroup *pc,
-	struct mem_cgroup *from, struct mem_cgroup *to)
+	struct mem_cgroup *from, struct mem_cgroup *to, bool uncharge)
 {
 	struct page *page;
-	int cpu;
-	struct mem_cgroup_stat *stat;
-	struct mem_cgroup_stat_cpu *cpustat;
 
 	VM_BUG_ON(from == to);
 	VM_BUG_ON(PageLRU(pc->page));
@@ -1645,38 +1809,28 @@
 	VM_BUG_ON(!PageCgroupUsed(pc));
 	VM_BUG_ON(pc->mem_cgroup != from);
 
-	if (!mem_cgroup_is_root(from))
-		res_counter_uncharge(&from->res, PAGE_SIZE);
-	mem_cgroup_charge_statistics(from, pc, false);
-
 	page = pc->page;
 	if (page_mapped(page) && !PageAnon(page)) {
-		cpu = smp_processor_id();
-		/* Update mapped_file data for mem_cgroup "from" */
-		stat = &from->stat;
-		cpustat = &stat->cpustat[cpu];
-		__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_FILE_MAPPED,
-						-1);
-
-		/* Update mapped_file data for mem_cgroup "to" */
-		stat = &to->stat;
-		cpustat = &stat->cpustat[cpu];
-		__mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_FILE_MAPPED,
-						1);
+		/* Update mapped_file data for mem_cgroup */
+		preempt_disable();
+		__this_cpu_dec(from->stat->count[MEM_CGROUP_STAT_FILE_MAPPED]);
+		__this_cpu_inc(to->stat->count[MEM_CGROUP_STAT_FILE_MAPPED]);
+		preempt_enable();
 	}
+	mem_cgroup_charge_statistics(from, pc, false);
+	if (uncharge)
+		/* This is not "cancel", but cancel_charge does all we need. */
+		mem_cgroup_cancel_charge(from);
 
-	if (do_swap_account && !mem_cgroup_is_root(from))
-		res_counter_uncharge(&from->memsw, PAGE_SIZE);
-	css_put(&from->css);
-
-	css_get(&to->css);
+	/* caller should have done css_get */
 	pc->mem_cgroup = to;
 	mem_cgroup_charge_statistics(to, pc, true);
 	/*
 	 * We charges against "to" which may not have any tasks. Then, "to"
 	 * can be under rmdir(). But in current implementation, caller of
-	 * this function is just force_empty() and it's garanteed that
-	 * "to" is never removed. So, we don't check rmdir status here.
+	 * this function is just force_empty() and move charge, so it's
+	 * garanteed that "to" is never removed. So, we don't check rmdir
+	 * status here.
 	 */
 }
 
@@ -1685,15 +1839,20 @@
  * __mem_cgroup_move_account()
  */
 static int mem_cgroup_move_account(struct page_cgroup *pc,
-				struct mem_cgroup *from, struct mem_cgroup *to)
+		struct mem_cgroup *from, struct mem_cgroup *to, bool uncharge)
 {
 	int ret = -EINVAL;
 	lock_page_cgroup(pc);
 	if (PageCgroupUsed(pc) && pc->mem_cgroup == from) {
-		__mem_cgroup_move_account(pc, from, to);
+		__mem_cgroup_move_account(pc, from, to, uncharge);
 		ret = 0;
 	}
 	unlock_page_cgroup(pc);
+	/*
+	 * check events
+	 */
+	memcg_check_events(to, pc->page);
+	memcg_check_events(from, pc->page);
 	return ret;
 }
 
@@ -1722,15 +1881,13 @@
 		goto put;
 
 	parent = mem_cgroup_from_cont(pcg);
-	ret = __mem_cgroup_try_charge(NULL, gfp_mask, &parent, false, page);
+	ret = __mem_cgroup_try_charge(NULL, gfp_mask, &parent, false);
 	if (ret || !parent)
 		goto put_back;
 
-	ret = mem_cgroup_move_account(pc, child, parent);
-	if (!ret)
-		css_put(&parent->css);	/* drop extra refcnt by try_charge() */
-	else
-		mem_cgroup_cancel_charge(parent);	/* does css_put */
+	ret = mem_cgroup_move_account(pc, child, parent, true);
+	if (ret)
+		mem_cgroup_cancel_charge(parent);
 put_back:
 	putback_lru_page(page);
 put:
@@ -1760,7 +1917,7 @@
 	prefetchw(pc);
 
 	mem = memcg;
-	ret = __mem_cgroup_try_charge(mm, gfp_mask, &mem, true, page);
+	ret = __mem_cgroup_try_charge(mm, gfp_mask, &mem, true);
 	if (ret || !mem)
 		return ret;
 
@@ -1880,14 +2037,14 @@
 	if (!mem)
 		goto charge_cur_mm;
 	*ptr = mem;
-	ret = __mem_cgroup_try_charge(NULL, mask, ptr, true, page);
+	ret = __mem_cgroup_try_charge(NULL, mask, ptr, true);
 	/* drop extra refcnt from tryget */
 	css_put(&mem->css);
 	return ret;
 charge_cur_mm:
 	if (unlikely(!mm))
 		mm = &init_mm;
-	return __mem_cgroup_try_charge(mm, mask, ptr, true, page);
+	return __mem_cgroup_try_charge(mm, mask, ptr, true);
 }
 
 static void
@@ -2064,8 +2221,7 @@
 	mz = page_cgroup_zoneinfo(pc);
 	unlock_page_cgroup(pc);
 
-	if (mem_cgroup_soft_limit_check(mem))
-		mem_cgroup_update_tree(mem, page);
+	memcg_check_events(mem, page);
 	/* at swapout, this memcg will be accessed to record to swap */
 	if (ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
 		css_put(&mem->css);
@@ -2192,6 +2348,64 @@
 	}
 	rcu_read_unlock();
 }
+
+/**
+ * mem_cgroup_move_swap_account - move swap charge and swap_cgroup's record.
+ * @entry: swap entry to be moved
+ * @from:  mem_cgroup which the entry is moved from
+ * @to:  mem_cgroup which the entry is moved to
+ * @need_fixup: whether we should fixup res_counters and refcounts.
+ *
+ * It succeeds only when the swap_cgroup's record for this entry is the same
+ * as the mem_cgroup's id of @from.
+ *
+ * Returns 0 on success, -EINVAL on failure.
+ *
+ * The caller must have charged to @to, IOW, called res_counter_charge() about
+ * both res and memsw, and called css_get().
+ */
+static int mem_cgroup_move_swap_account(swp_entry_t entry,
+		struct mem_cgroup *from, struct mem_cgroup *to, bool need_fixup)
+{
+	unsigned short old_id, new_id;
+
+	old_id = css_id(&from->css);
+	new_id = css_id(&to->css);
+
+	if (swap_cgroup_cmpxchg(entry, old_id, new_id) == old_id) {
+		mem_cgroup_swap_statistics(from, false);
+		mem_cgroup_swap_statistics(to, true);
+		/*
+		 * This function is only called from task migration context now.
+		 * It postpones res_counter and refcount handling till the end
+		 * of task migration(mem_cgroup_clear_mc()) for performance
+		 * improvement. But we cannot postpone mem_cgroup_get(to)
+		 * because if the process that has been moved to @to does
+		 * swap-in, the refcount of @to might be decreased to 0.
+		 */
+		mem_cgroup_get(to);
+		if (need_fixup) {
+			if (!mem_cgroup_is_root(from))
+				res_counter_uncharge(&from->memsw, PAGE_SIZE);
+			mem_cgroup_put(from);
+			/*
+			 * we charged both to->res and to->memsw, so we should
+			 * uncharge to->res.
+			 */
+			if (!mem_cgroup_is_root(to))
+				res_counter_uncharge(&to->res, PAGE_SIZE);
+			css_put(&to->css);
+		}
+		return 0;
+	}
+	return -EINVAL;
+}
+#else
+static inline int mem_cgroup_move_swap_account(swp_entry_t entry,
+		struct mem_cgroup *from, struct mem_cgroup *to, bool need_fixup)
+{
+	return -EINVAL;
+}
 #endif
 
 /*
@@ -2216,8 +2430,7 @@
 	unlock_page_cgroup(pc);
 
 	if (mem) {
-		ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, &mem, false,
-						page);
+		ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, &mem, false);
 		css_put(&mem->css);
 	}
 	*ptr = mem;
@@ -2704,7 +2917,7 @@
 mem_cgroup_get_idx_stat(struct mem_cgroup *mem, void *data)
 {
 	struct mem_cgroup_idx_data *d = data;
-	d->val += mem_cgroup_read_stat(&mem->stat, d->idx);
+	d->val += mem_cgroup_read_stat(mem, d->idx);
 	return 0;
 }
 
@@ -2719,40 +2932,50 @@
 	*val = d.val;
 }
 
+static inline u64 mem_cgroup_usage(struct mem_cgroup *mem, bool swap)
+{
+	u64 idx_val, val;
+
+	if (!mem_cgroup_is_root(mem)) {
+		if (!swap)
+			return res_counter_read_u64(&mem->res, RES_USAGE);
+		else
+			return res_counter_read_u64(&mem->memsw, RES_USAGE);
+	}
+
+	mem_cgroup_get_recursive_idx_stat(mem, MEM_CGROUP_STAT_CACHE, &idx_val);
+	val = idx_val;
+	mem_cgroup_get_recursive_idx_stat(mem, MEM_CGROUP_STAT_RSS, &idx_val);
+	val += idx_val;
+
+	if (swap) {
+		mem_cgroup_get_recursive_idx_stat(mem,
+				MEM_CGROUP_STAT_SWAPOUT, &idx_val);
+		val += idx_val;
+	}
+
+	return val << PAGE_SHIFT;
+}
+
 static u64 mem_cgroup_read(struct cgroup *cont, struct cftype *cft)
 {
 	struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
-	u64 idx_val, val;
+	u64 val;
 	int type, name;
 
 	type = MEMFILE_TYPE(cft->private);
 	name = MEMFILE_ATTR(cft->private);
 	switch (type) {
 	case _MEM:
-		if (name == RES_USAGE && mem_cgroup_is_root(mem)) {
-			mem_cgroup_get_recursive_idx_stat(mem,
-				MEM_CGROUP_STAT_CACHE, &idx_val);
-			val = idx_val;
-			mem_cgroup_get_recursive_idx_stat(mem,
-				MEM_CGROUP_STAT_RSS, &idx_val);
-			val += idx_val;
-			val <<= PAGE_SHIFT;
-		} else
+		if (name == RES_USAGE)
+			val = mem_cgroup_usage(mem, false);
+		else
 			val = res_counter_read_u64(&mem->res, name);
 		break;
 	case _MEMSWAP:
-		if (name == RES_USAGE && mem_cgroup_is_root(mem)) {
-			mem_cgroup_get_recursive_idx_stat(mem,
-				MEM_CGROUP_STAT_CACHE, &idx_val);
-			val = idx_val;
-			mem_cgroup_get_recursive_idx_stat(mem,
-				MEM_CGROUP_STAT_RSS, &idx_val);
-			val += idx_val;
-			mem_cgroup_get_recursive_idx_stat(mem,
-				MEM_CGROUP_STAT_SWAPOUT, &idx_val);
-			val += idx_val;
-			val <<= PAGE_SHIFT;
-		} else
+		if (name == RES_USAGE)
+			val = mem_cgroup_usage(mem, true);
+		else
 			val = res_counter_read_u64(&mem->memsw, name);
 		break;
 	default:
@@ -2865,6 +3088,39 @@
 	return 0;
 }
 
+static u64 mem_cgroup_move_charge_read(struct cgroup *cgrp,
+					struct cftype *cft)
+{
+	return mem_cgroup_from_cont(cgrp)->move_charge_at_immigrate;
+}
+
+#ifdef CONFIG_MMU
+static int mem_cgroup_move_charge_write(struct cgroup *cgrp,
+					struct cftype *cft, u64 val)
+{
+	struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+
+	if (val >= (1 << NR_MOVE_TYPE))
+		return -EINVAL;
+	/*
+	 * We check this value several times in both in can_attach() and
+	 * attach(), so we need cgroup lock to prevent this value from being
+	 * inconsistent.
+	 */
+	cgroup_lock();
+	mem->move_charge_at_immigrate = val;
+	cgroup_unlock();
+
+	return 0;
+}
+#else
+static int mem_cgroup_move_charge_write(struct cgroup *cgrp,
+					struct cftype *cft, u64 val)
+{
+	return -ENOSYS;
+}
+#endif
+
 
 /* For read statistics */
 enum {
@@ -2910,18 +3166,18 @@
 	s64 val;
 
 	/* per cpu stat */
-	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_CACHE);
+	val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_CACHE);
 	s->stat[MCS_CACHE] += val * PAGE_SIZE;
-	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_RSS);
+	val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_RSS);
 	s->stat[MCS_RSS] += val * PAGE_SIZE;
-	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_FILE_MAPPED);
+	val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_FILE_MAPPED);
 	s->stat[MCS_FILE_MAPPED] += val * PAGE_SIZE;
-	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_PGPGIN_COUNT);
+	val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_PGPGIN_COUNT);
 	s->stat[MCS_PGPGIN] += val;
-	val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_PGPGOUT_COUNT);
+	val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_PGPGOUT_COUNT);
 	s->stat[MCS_PGPGOUT] += val;
 	if (do_swap_account) {
-		val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_SWAPOUT);
+		val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_SWAPOUT);
 		s->stat[MCS_SWAP] += val * PAGE_SIZE;
 	}
 
@@ -3049,12 +3305,249 @@
 	return 0;
 }
 
+static void __mem_cgroup_threshold(struct mem_cgroup *memcg, bool swap)
+{
+	struct mem_cgroup_threshold_ary *t;
+	u64 usage;
+	int i;
+
+	rcu_read_lock();
+	if (!swap)
+		t = rcu_dereference(memcg->thresholds);
+	else
+		t = rcu_dereference(memcg->memsw_thresholds);
+
+	if (!t)
+		goto unlock;
+
+	usage = mem_cgroup_usage(memcg, swap);
+
+	/*
+	 * current_threshold points to threshold just below usage.
+	 * If it's not true, a threshold was crossed after last
+	 * call of __mem_cgroup_threshold().
+	 */
+	i = atomic_read(&t->current_threshold);
+
+	/*
+	 * Iterate backward over array of thresholds starting from
+	 * current_threshold and check if a threshold is crossed.
+	 * If none of thresholds below usage is crossed, we read
+	 * only one element of the array here.
+	 */
+	for (; i >= 0 && unlikely(t->entries[i].threshold > usage); i--)
+		eventfd_signal(t->entries[i].eventfd, 1);
+
+	/* i = current_threshold + 1 */
+	i++;
+
+	/*
+	 * Iterate forward over array of thresholds starting from
+	 * current_threshold+1 and check if a threshold is crossed.
+	 * If none of thresholds above usage is crossed, we read
+	 * only one element of the array here.
+	 */
+	for (; i < t->size && unlikely(t->entries[i].threshold <= usage); i++)
+		eventfd_signal(t->entries[i].eventfd, 1);
+
+	/* Update current_threshold */
+	atomic_set(&t->current_threshold, i - 1);
+unlock:
+	rcu_read_unlock();
+}
+
+static void mem_cgroup_threshold(struct mem_cgroup *memcg)
+{
+	__mem_cgroup_threshold(memcg, false);
+	if (do_swap_account)
+		__mem_cgroup_threshold(memcg, true);
+}
+
+static int compare_thresholds(const void *a, const void *b)
+{
+	const struct mem_cgroup_threshold *_a = a;
+	const struct mem_cgroup_threshold *_b = b;
+
+	return _a->threshold - _b->threshold;
+}
+
+static int mem_cgroup_register_event(struct cgroup *cgrp, struct cftype *cft,
+		struct eventfd_ctx *eventfd, const char *args)
+{
+	struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
+	struct mem_cgroup_threshold_ary *thresholds, *thresholds_new;
+	int type = MEMFILE_TYPE(cft->private);
+	u64 threshold, usage;
+	int size;
+	int i, ret;
+
+	ret = res_counter_memparse_write_strategy(args, &threshold);
+	if (ret)
+		return ret;
+
+	mutex_lock(&memcg->thresholds_lock);
+	if (type == _MEM)
+		thresholds = memcg->thresholds;
+	else if (type == _MEMSWAP)
+		thresholds = memcg->memsw_thresholds;
+	else
+		BUG();
+
+	usage = mem_cgroup_usage(memcg, type == _MEMSWAP);
+
+	/* Check if a threshold crossed before adding a new one */
+	if (thresholds)
+		__mem_cgroup_threshold(memcg, type == _MEMSWAP);
+
+	if (thresholds)
+		size = thresholds->size + 1;
+	else
+		size = 1;
+
+	/* Allocate memory for new array of thresholds */
+	thresholds_new = kmalloc(sizeof(*thresholds_new) +
+			size * sizeof(struct mem_cgroup_threshold),
+			GFP_KERNEL);
+	if (!thresholds_new) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+	thresholds_new->size = size;
+
+	/* Copy thresholds (if any) to new array */
+	if (thresholds)
+		memcpy(thresholds_new->entries, thresholds->entries,
+				thresholds->size *
+				sizeof(struct mem_cgroup_threshold));
+	/* Add new threshold */
+	thresholds_new->entries[size - 1].eventfd = eventfd;
+	thresholds_new->entries[size - 1].threshold = threshold;
+
+	/* Sort thresholds. Registering of new threshold isn't time-critical */
+	sort(thresholds_new->entries, size,
+			sizeof(struct mem_cgroup_threshold),
+			compare_thresholds, NULL);
+
+	/* Find current threshold */
+	atomic_set(&thresholds_new->current_threshold, -1);
+	for (i = 0; i < size; i++) {
+		if (thresholds_new->entries[i].threshold < usage) {
+			/*
+			 * thresholds_new->current_threshold will not be used
+			 * until rcu_assign_pointer(), so it's safe to increment
+			 * it here.
+			 */
+			atomic_inc(&thresholds_new->current_threshold);
+		}
+	}
+
+	if (type == _MEM)
+		rcu_assign_pointer(memcg->thresholds, thresholds_new);
+	else
+		rcu_assign_pointer(memcg->memsw_thresholds, thresholds_new);
+
+	/* To be sure that nobody uses thresholds before freeing it */
+	synchronize_rcu();
+
+	kfree(thresholds);
+unlock:
+	mutex_unlock(&memcg->thresholds_lock);
+
+	return ret;
+}
+
+static int mem_cgroup_unregister_event(struct cgroup *cgrp, struct cftype *cft,
+		struct eventfd_ctx *eventfd)
+{
+	struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
+	struct mem_cgroup_threshold_ary *thresholds, *thresholds_new;
+	int type = MEMFILE_TYPE(cft->private);
+	u64 usage;
+	int size = 0;
+	int i, j, ret;
+
+	mutex_lock(&memcg->thresholds_lock);
+	if (type == _MEM)
+		thresholds = memcg->thresholds;
+	else if (type == _MEMSWAP)
+		thresholds = memcg->memsw_thresholds;
+	else
+		BUG();
+
+	/*
+	 * Something went wrong if we trying to unregister a threshold
+	 * if we don't have thresholds
+	 */
+	BUG_ON(!thresholds);
+
+	usage = mem_cgroup_usage(memcg, type == _MEMSWAP);
+
+	/* Check if a threshold crossed before removing */
+	__mem_cgroup_threshold(memcg, type == _MEMSWAP);
+
+	/* Calculate new number of threshold */
+	for (i = 0; i < thresholds->size; i++) {
+		if (thresholds->entries[i].eventfd != eventfd)
+			size++;
+	}
+
+	/* Set thresholds array to NULL if we don't have thresholds */
+	if (!size) {
+		thresholds_new = NULL;
+		goto assign;
+	}
+
+	/* Allocate memory for new array of thresholds */
+	thresholds_new = kmalloc(sizeof(*thresholds_new) +
+			size * sizeof(struct mem_cgroup_threshold),
+			GFP_KERNEL);
+	if (!thresholds_new) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+	thresholds_new->size = size;
+
+	/* Copy thresholds and find current threshold */
+	atomic_set(&thresholds_new->current_threshold, -1);
+	for (i = 0, j = 0; i < thresholds->size; i++) {
+		if (thresholds->entries[i].eventfd == eventfd)
+			continue;
+
+		thresholds_new->entries[j] = thresholds->entries[i];
+		if (thresholds_new->entries[j].threshold < usage) {
+			/*
+			 * thresholds_new->current_threshold will not be used
+			 * until rcu_assign_pointer(), so it's safe to increment
+			 * it here.
+			 */
+			atomic_inc(&thresholds_new->current_threshold);
+		}
+		j++;
+	}
+
+assign:
+	if (type == _MEM)
+		rcu_assign_pointer(memcg->thresholds, thresholds_new);
+	else
+		rcu_assign_pointer(memcg->memsw_thresholds, thresholds_new);
+
+	/* To be sure that nobody uses thresholds before freeing it */
+	synchronize_rcu();
+
+	kfree(thresholds);
+unlock:
+	mutex_unlock(&memcg->thresholds_lock);
+
+	return ret;
+}
 
 static struct cftype mem_cgroup_files[] = {
 	{
 		.name = "usage_in_bytes",
 		.private = MEMFILE_PRIVATE(_MEM, RES_USAGE),
 		.read_u64 = mem_cgroup_read,
+		.register_event = mem_cgroup_register_event,
+		.unregister_event = mem_cgroup_unregister_event,
 	},
 	{
 		.name = "max_usage_in_bytes",
@@ -3098,6 +3591,11 @@
 		.read_u64 = mem_cgroup_swappiness_read,
 		.write_u64 = mem_cgroup_swappiness_write,
 	},
+	{
+		.name = "move_charge_at_immigrate",
+		.read_u64 = mem_cgroup_move_charge_read,
+		.write_u64 = mem_cgroup_move_charge_write,
+	},
 };
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
@@ -3106,6 +3604,8 @@
 		.name = "memsw.usage_in_bytes",
 		.private = MEMFILE_PRIVATE(_MEMSWAP, RES_USAGE),
 		.read_u64 = mem_cgroup_read,
+		.register_event = mem_cgroup_register_event,
+		.unregister_event = mem_cgroup_unregister_event,
 	},
 	{
 		.name = "memsw.max_usage_in_bytes",
@@ -3180,17 +3680,12 @@
 	kfree(mem->info.nodeinfo[node]);
 }
 
-static int mem_cgroup_size(void)
-{
-	int cpustat_size = nr_cpu_ids * sizeof(struct mem_cgroup_stat_cpu);
-	return sizeof(struct mem_cgroup) + cpustat_size;
-}
-
 static struct mem_cgroup *mem_cgroup_alloc(void)
 {
 	struct mem_cgroup *mem;
-	int size = mem_cgroup_size();
+	int size = sizeof(struct mem_cgroup);
 
+	/* Can be very big if MAX_NUMNODES is very big */
 	if (size < PAGE_SIZE)
 		mem = kmalloc(size, GFP_KERNEL);
 	else
@@ -3198,6 +3693,14 @@
 
 	if (mem)
 		memset(mem, 0, size);
+	mem->stat = alloc_percpu(struct mem_cgroup_stat_cpu);
+	if (!mem->stat) {
+		if (size < PAGE_SIZE)
+			kfree(mem);
+		else
+			vfree(mem);
+		mem = NULL;
+	}
 	return mem;
 }
 
@@ -3222,7 +3725,8 @@
 	for_each_node_state(node, N_POSSIBLE)
 		free_mem_cgroup_per_zone_info(mem, node);
 
-	if (mem_cgroup_size() < PAGE_SIZE)
+	free_percpu(mem->stat);
+	if (sizeof(struct mem_cgroup) < PAGE_SIZE)
 		kfree(mem);
 	else
 		vfree(mem);
@@ -3233,9 +3737,9 @@
 	atomic_inc(&mem->refcnt);
 }
 
-static void mem_cgroup_put(struct mem_cgroup *mem)
+static void __mem_cgroup_put(struct mem_cgroup *mem, int count)
 {
-	if (atomic_dec_and_test(&mem->refcnt)) {
+	if (atomic_sub_and_test(count, &mem->refcnt)) {
 		struct mem_cgroup *parent = parent_mem_cgroup(mem);
 		__mem_cgroup_free(mem);
 		if (parent)
@@ -3243,6 +3747,11 @@
 	}
 }
 
+static void mem_cgroup_put(struct mem_cgroup *mem)
+{
+	__mem_cgroup_put(mem, 1);
+}
+
 /*
  * Returns the parent mem_cgroup in memcgroup hierarchy with hierarchy enabled.
  */
@@ -3319,7 +3828,6 @@
 			INIT_WORK(&stock->work, drain_local_stock);
 		}
 		hotcpu_notifier(memcg_stock_cpu_callback, 0);
-
 	} else {
 		parent = mem_cgroup_from_cont(cont->parent);
 		mem->use_hierarchy = parent->use_hierarchy;
@@ -3345,6 +3853,8 @@
 	if (parent)
 		mem->swappiness = get_swappiness(parent);
 	atomic_set(&mem->refcnt, 1);
+	mem->move_charge_at_immigrate = 0;
+	mutex_init(&mem->thresholds_lock);
 	return &mem->css;
 free_out:
 	__mem_cgroup_free(mem);
@@ -3381,16 +3891,444 @@
 	return ret;
 }
 
+#ifdef CONFIG_MMU
+/* Handlers for move charge at task migration. */
+#define PRECHARGE_COUNT_AT_ONCE	256
+static int mem_cgroup_do_precharge(unsigned long count)
+{
+	int ret = 0;
+	int batch_count = PRECHARGE_COUNT_AT_ONCE;
+	struct mem_cgroup *mem = mc.to;
+
+	if (mem_cgroup_is_root(mem)) {
+		mc.precharge += count;
+		/* we don't need css_get for root */
+		return ret;
+	}
+	/* try to charge at once */
+	if (count > 1) {
+		struct res_counter *dummy;
+		/*
+		 * "mem" cannot be under rmdir() because we've already checked
+		 * by cgroup_lock_live_cgroup() that it is not removed and we
+		 * are still under the same cgroup_mutex. So we can postpone
+		 * css_get().
+		 */
+		if (res_counter_charge(&mem->res, PAGE_SIZE * count, &dummy))
+			goto one_by_one;
+		if (do_swap_account && res_counter_charge(&mem->memsw,
+						PAGE_SIZE * count, &dummy)) {
+			res_counter_uncharge(&mem->res, PAGE_SIZE * count);
+			goto one_by_one;
+		}
+		mc.precharge += count;
+		VM_BUG_ON(test_bit(CSS_ROOT, &mem->css.flags));
+		WARN_ON_ONCE(count > INT_MAX);
+		__css_get(&mem->css, (int)count);
+		return ret;
+	}
+one_by_one:
+	/* fall back to one by one charge */
+	while (count--) {
+		if (signal_pending(current)) {
+			ret = -EINTR;
+			break;
+		}
+		if (!batch_count--) {
+			batch_count = PRECHARGE_COUNT_AT_ONCE;
+			cond_resched();
+		}
+		ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, &mem, false);
+		if (ret || !mem)
+			/* mem_cgroup_clear_mc() will do uncharge later */
+			return -ENOMEM;
+		mc.precharge++;
+	}
+	return ret;
+}
+#else	/* !CONFIG_MMU */
+static int mem_cgroup_can_attach(struct cgroup_subsys *ss,
+				struct cgroup *cgroup,
+				struct task_struct *p,
+				bool threadgroup)
+{
+	return 0;
+}
+static void mem_cgroup_cancel_attach(struct cgroup_subsys *ss,
+				struct cgroup *cgroup,
+				struct task_struct *p,
+				bool threadgroup)
+{
+}
 static void mem_cgroup_move_task(struct cgroup_subsys *ss,
 				struct cgroup *cont,
 				struct cgroup *old_cont,
 				struct task_struct *p,
 				bool threadgroup)
 {
+}
+#endif
+
+/**
+ * is_target_pte_for_mc - check a pte whether it is valid for move charge
+ * @vma: the vma the pte to be checked belongs
+ * @addr: the address corresponding to the pte to be checked
+ * @ptent: the pte to be checked
+ * @target: the pointer the target page or swap ent will be stored(can be NULL)
+ *
+ * Returns
+ *   0(MC_TARGET_NONE): if the pte is not a target for move charge.
+ *   1(MC_TARGET_PAGE): if the page corresponding to this pte is a target for
+ *     move charge. if @target is not NULL, the page is stored in target->page
+ *     with extra refcnt got(Callers should handle it).
+ *   2(MC_TARGET_SWAP): if the swap entry corresponding to this pte is a
+ *     target for charge migration. if @target is not NULL, the entry is stored
+ *     in target->ent.
+ *
+ * Called with pte lock held.
+ */
+union mc_target {
+	struct page	*page;
+	swp_entry_t	ent;
+};
+
+enum mc_target_type {
+	MC_TARGET_NONE,	/* not used */
+	MC_TARGET_PAGE,
+	MC_TARGET_SWAP,
+};
+
+static int is_target_pte_for_mc(struct vm_area_struct *vma,
+		unsigned long addr, pte_t ptent, union mc_target *target)
+{
+	struct page *page = NULL;
+	struct page_cgroup *pc;
+	int ret = 0;
+	swp_entry_t ent = { .val = 0 };
+	int usage_count = 0;
+	bool move_anon = test_bit(MOVE_CHARGE_TYPE_ANON,
+					&mc.to->move_charge_at_immigrate);
+
+	if (!pte_present(ptent)) {
+		/* TODO: handle swap of shmes/tmpfs */
+		if (pte_none(ptent) || pte_file(ptent))
+			return 0;
+		else if (is_swap_pte(ptent)) {
+			ent = pte_to_swp_entry(ptent);
+			if (!move_anon || non_swap_entry(ent))
+				return 0;
+			usage_count = mem_cgroup_count_swap_user(ent, &page);
+		}
+	} else {
+		page = vm_normal_page(vma, addr, ptent);
+		if (!page || !page_mapped(page))
+			return 0;
+		/*
+		 * TODO: We don't move charges of file(including shmem/tmpfs)
+		 * pages for now.
+		 */
+		if (!move_anon || !PageAnon(page))
+			return 0;
+		if (!get_page_unless_zero(page))
+			return 0;
+		usage_count = page_mapcount(page);
+	}
+	if (usage_count > 1) {
+		/*
+		 * TODO: We don't move charges of shared(used by multiple
+		 * processes) pages for now.
+		 */
+		if (page)
+			put_page(page);
+		return 0;
+	}
+	if (page) {
+		pc = lookup_page_cgroup(page);
+		/*
+		 * Do only loose check w/o page_cgroup lock.
+		 * mem_cgroup_move_account() checks the pc is valid or not under
+		 * the lock.
+		 */
+		if (PageCgroupUsed(pc) && pc->mem_cgroup == mc.from) {
+			ret = MC_TARGET_PAGE;
+			if (target)
+				target->page = page;
+		}
+		if (!ret || !target)
+			put_page(page);
+	}
+	/* throught */
+	if (ent.val && do_swap_account && !ret &&
+			css_id(&mc.from->css) == lookup_swap_cgroup(ent)) {
+		ret = MC_TARGET_SWAP;
+		if (target)
+			target->ent = ent;
+	}
+	return ret;
+}
+
+static int mem_cgroup_count_precharge_pte_range(pmd_t *pmd,
+					unsigned long addr, unsigned long end,
+					struct mm_walk *walk)
+{
+	struct vm_area_struct *vma = walk->private;
+	pte_t *pte;
+	spinlock_t *ptl;
+
+	pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
+	for (; addr != end; pte++, addr += PAGE_SIZE)
+		if (is_target_pte_for_mc(vma, addr, *pte, NULL))
+			mc.precharge++;	/* increment precharge temporarily */
+	pte_unmap_unlock(pte - 1, ptl);
+	cond_resched();
+
+	return 0;
+}
+
+static unsigned long mem_cgroup_count_precharge(struct mm_struct *mm)
+{
+	unsigned long precharge;
+	struct vm_area_struct *vma;
+
+	down_read(&mm->mmap_sem);
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		struct mm_walk mem_cgroup_count_precharge_walk = {
+			.pmd_entry = mem_cgroup_count_precharge_pte_range,
+			.mm = mm,
+			.private = vma,
+		};
+		if (is_vm_hugetlb_page(vma))
+			continue;
+		/* TODO: We don't move charges of shmem/tmpfs pages for now. */
+		if (vma->vm_flags & VM_SHARED)
+			continue;
+		walk_page_range(vma->vm_start, vma->vm_end,
+					&mem_cgroup_count_precharge_walk);
+	}
+	up_read(&mm->mmap_sem);
+
+	precharge = mc.precharge;
+	mc.precharge = 0;
+
+	return precharge;
+}
+
+static int mem_cgroup_precharge_mc(struct mm_struct *mm)
+{
+	return mem_cgroup_do_precharge(mem_cgroup_count_precharge(mm));
+}
+
+static void mem_cgroup_clear_mc(void)
+{
+	/* we must uncharge all the leftover precharges from mc.to */
+	if (mc.precharge) {
+		__mem_cgroup_cancel_charge(mc.to, mc.precharge);
+		mc.precharge = 0;
+	}
 	/*
-	 * FIXME: It's better to move charges of this process from old
-	 * memcg to new memcg. But it's just on TODO-List now.
+	 * we didn't uncharge from mc.from at mem_cgroup_move_account(), so
+	 * we must uncharge here.
 	 */
+	if (mc.moved_charge) {
+		__mem_cgroup_cancel_charge(mc.from, mc.moved_charge);
+		mc.moved_charge = 0;
+	}
+	/* we must fixup refcnts and charges */
+	if (mc.moved_swap) {
+		WARN_ON_ONCE(mc.moved_swap > INT_MAX);
+		/* uncharge swap account from the old cgroup */
+		if (!mem_cgroup_is_root(mc.from))
+			res_counter_uncharge(&mc.from->memsw,
+						PAGE_SIZE * mc.moved_swap);
+		__mem_cgroup_put(mc.from, mc.moved_swap);
+
+		if (!mem_cgroup_is_root(mc.to)) {
+			/*
+			 * we charged both to->res and to->memsw, so we should
+			 * uncharge to->res.
+			 */
+			res_counter_uncharge(&mc.to->res,
+						PAGE_SIZE * mc.moved_swap);
+			VM_BUG_ON(test_bit(CSS_ROOT, &mc.to->css.flags));
+			__css_put(&mc.to->css, mc.moved_swap);
+		}
+		/* we've already done mem_cgroup_get(mc.to) */
+
+		mc.moved_swap = 0;
+	}
+	mc.from = NULL;
+	mc.to = NULL;
+	mc.moving_task = NULL;
+	wake_up_all(&mc.waitq);
+}
+
+static int mem_cgroup_can_attach(struct cgroup_subsys *ss,
+				struct cgroup *cgroup,
+				struct task_struct *p,
+				bool threadgroup)
+{
+	int ret = 0;
+	struct mem_cgroup *mem = mem_cgroup_from_cont(cgroup);
+
+	if (mem->move_charge_at_immigrate) {
+		struct mm_struct *mm;
+		struct mem_cgroup *from = mem_cgroup_from_task(p);
+
+		VM_BUG_ON(from == mem);
+
+		mm = get_task_mm(p);
+		if (!mm)
+			return 0;
+		/* We move charges only when we move a owner of the mm */
+		if (mm->owner == p) {
+			VM_BUG_ON(mc.from);
+			VM_BUG_ON(mc.to);
+			VM_BUG_ON(mc.precharge);
+			VM_BUG_ON(mc.moved_charge);
+			VM_BUG_ON(mc.moved_swap);
+			VM_BUG_ON(mc.moving_task);
+			mc.from = from;
+			mc.to = mem;
+			mc.precharge = 0;
+			mc.moved_charge = 0;
+			mc.moved_swap = 0;
+			mc.moving_task = current;
+
+			ret = mem_cgroup_precharge_mc(mm);
+			if (ret)
+				mem_cgroup_clear_mc();
+		}
+		mmput(mm);
+	}
+	return ret;
+}
+
+static void mem_cgroup_cancel_attach(struct cgroup_subsys *ss,
+				struct cgroup *cgroup,
+				struct task_struct *p,
+				bool threadgroup)
+{
+	mem_cgroup_clear_mc();
+}
+
+static int mem_cgroup_move_charge_pte_range(pmd_t *pmd,
+				unsigned long addr, unsigned long end,
+				struct mm_walk *walk)
+{
+	int ret = 0;
+	struct vm_area_struct *vma = walk->private;
+	pte_t *pte;
+	spinlock_t *ptl;
+
+retry:
+	pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
+	for (; addr != end; addr += PAGE_SIZE) {
+		pte_t ptent = *(pte++);
+		union mc_target target;
+		int type;
+		struct page *page;
+		struct page_cgroup *pc;
+		swp_entry_t ent;
+
+		if (!mc.precharge)
+			break;
+
+		type = is_target_pte_for_mc(vma, addr, ptent, &target);
+		switch (type) {
+		case MC_TARGET_PAGE:
+			page = target.page;
+			if (isolate_lru_page(page))
+				goto put;
+			pc = lookup_page_cgroup(page);
+			if (!mem_cgroup_move_account(pc,
+						mc.from, mc.to, false)) {
+				mc.precharge--;
+				/* we uncharge from mc.from later. */
+				mc.moved_charge++;
+			}
+			putback_lru_page(page);
+put:			/* is_target_pte_for_mc() gets the page */
+			put_page(page);
+			break;
+		case MC_TARGET_SWAP:
+			ent = target.ent;
+			if (!mem_cgroup_move_swap_account(ent,
+						mc.from, mc.to, false)) {
+				mc.precharge--;
+				/* we fixup refcnts and charges later. */
+				mc.moved_swap++;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+	pte_unmap_unlock(pte - 1, ptl);
+	cond_resched();
+
+	if (addr != end) {
+		/*
+		 * We have consumed all precharges we got in can_attach().
+		 * We try charge one by one, but don't do any additional
+		 * charges to mc.to if we have failed in charge once in attach()
+		 * phase.
+		 */
+		ret = mem_cgroup_do_precharge(1);
+		if (!ret)
+			goto retry;
+	}
+
+	return ret;
+}
+
+static void mem_cgroup_move_charge(struct mm_struct *mm)
+{
+	struct vm_area_struct *vma;
+
+	lru_add_drain_all();
+	down_read(&mm->mmap_sem);
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		int ret;
+		struct mm_walk mem_cgroup_move_charge_walk = {
+			.pmd_entry = mem_cgroup_move_charge_pte_range,
+			.mm = mm,
+			.private = vma,
+		};
+		if (is_vm_hugetlb_page(vma))
+			continue;
+		/* TODO: We don't move charges of shmem/tmpfs pages for now. */
+		if (vma->vm_flags & VM_SHARED)
+			continue;
+		ret = walk_page_range(vma->vm_start, vma->vm_end,
+						&mem_cgroup_move_charge_walk);
+		if (ret)
+			/*
+			 * means we have consumed all precharges and failed in
+			 * doing additional charge. Just abandon here.
+			 */
+			break;
+	}
+	up_read(&mm->mmap_sem);
+}
+
+static void mem_cgroup_move_task(struct cgroup_subsys *ss,
+				struct cgroup *cont,
+				struct cgroup *old_cont,
+				struct task_struct *p,
+				bool threadgroup)
+{
+	struct mm_struct *mm;
+
+	if (!mc.to)
+		/* no need to move charge */
+		return;
+
+	mm = get_task_mm(p);
+	if (mm) {
+		mem_cgroup_move_charge(mm);
+		mmput(mm);
+	}
+	mem_cgroup_clear_mc();
 }
 
 struct cgroup_subsys mem_cgroup_subsys = {
@@ -3400,6 +4338,8 @@
 	.pre_destroy = mem_cgroup_pre_destroy,
 	.destroy = mem_cgroup_destroy,
 	.populate = mem_cgroup_populate,
+	.can_attach = mem_cgroup_can_attach,
+	.cancel_attach = mem_cgroup_cancel_attach,
 	.attach = mem_cgroup_move_task,
 	.early_init = 0,
 	.use_id = 1,
diff --git a/mm/memory.c b/mm/memory.c
index d1153e3..5b7f200 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -190,9 +190,6 @@
 {
 }
 
-void sync_mm_rss(struct task_struct *task, struct mm_struct *mm)
-{
-}
 #endif
 
 /*
@@ -512,12 +509,8 @@
 		"BUG: Bad page map in process %s  pte:%08llx pmd:%08llx\n",
 		current->comm,
 		(long long)pte_val(pte), (long long)pmd_val(*pmd));
-	if (page) {
-		printk(KERN_ALERT
-		"page:%p flags:%p count:%d mapcount:%d mapping:%p index:%lx\n",
-		page, (void *)page->flags, page_count(page),
-		page_mapcount(page), page->mapping, page->index);
-	}
+	if (page)
+		dump_page(page);
 	printk(KERN_ALERT
 		"addr:%p vm_flags:%08lx anon_vma:%p mapping:%p index:%lx\n",
 		(void *)addr, vma->vm_flags, vma->anon_vma, mapping, index);
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 78e34e6..be211a5 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -688,9 +688,9 @@
 			if (page_count(page))
 				not_managed++;
 #ifdef CONFIG_DEBUG_VM
-			printk(KERN_INFO "removing from LRU failed"
-					 " %lx/%d/%lx\n",
-				pfn, page_count(page), page->flags);
+			printk(KERN_ALERT "removing pfn %lx from LRU failed\n",
+			       pfn);
+			dump_page(page);
 #endif
 		}
 	}
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index bda230e..643f66e 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1756,10 +1756,12 @@
 
 	if (!new)
 		return ERR_PTR(-ENOMEM);
+	rcu_read_lock();
 	if (current_cpuset_is_being_rebound()) {
 		nodemask_t mems = cpuset_mems_allowed(current);
 		mpol_rebind_policy(old, &mems);
 	}
+	rcu_read_unlock();
 	*new = *old;
 	atomic_set(&new->refcnt, 1);
 	return new;
diff --git a/mm/mmap.c b/mm/mmap.c
index f1b4448..75557c6 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1088,6 +1088,30 @@
 	return retval;
 }
 
+#ifdef __ARCH_WANT_SYS_OLD_MMAP
+struct mmap_arg_struct {
+	unsigned long addr;
+	unsigned long len;
+	unsigned long prot;
+	unsigned long flags;
+	unsigned long fd;
+	unsigned long offset;
+};
+
+SYSCALL_DEFINE1(old_mmap, struct mmap_arg_struct __user *, arg)
+{
+	struct mmap_arg_struct a;
+
+	if (copy_from_user(&a, arg, sizeof(a)))
+		return -EFAULT;
+	if (a.offset & ~PAGE_MASK)
+		return -EINVAL;
+
+	return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
+			      a.offset >> PAGE_SHIFT);
+}
+#endif /* __ARCH_WANT_SYS_OLD_MMAP */
+
 /*
  * Some shared mappigns will want the pages marked read-only
  * to track write events. If so, we'll downgrade vm_page_prot
diff --git a/mm/nommu.c b/mm/nommu.c
index b9b5cce..605ace8 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1428,6 +1428,30 @@
 	return retval;
 }
 
+#ifdef __ARCH_WANT_SYS_OLD_MMAP
+struct mmap_arg_struct {
+	unsigned long addr;
+	unsigned long len;
+	unsigned long prot;
+	unsigned long flags;
+	unsigned long fd;
+	unsigned long offset;
+};
+
+SYSCALL_DEFINE1(old_mmap, struct mmap_arg_struct __user *, arg)
+{
+	struct mmap_arg_struct a;
+
+	if (copy_from_user(&a, arg, sizeof(a)))
+		return -EFAULT;
+	if (a.offset & ~PAGE_MASK)
+		return -EINVAL;
+
+	return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
+			      a.offset >> PAGE_SHIFT);
+}
+#endif /* __ARCH_WANT_SYS_OLD_MMAP */
+
 /*
  * split a vma into two pieces at address 'addr', a new vma is allocated either
  * for the first part or the tail.
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 35755a4..9b223af 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -473,6 +473,8 @@
 	unsigned long points = 0;
 	struct task_struct *p;
 
+	if (sysctl_panic_on_oom == 2)
+		panic("out of memory(memcg). panic_on_oom is selected.\n");
 	read_lock(&tasklist_lock);
 retry:
 	p = select_bad_process(&points, mem);
@@ -601,13 +603,6 @@
 		/* Got some memory back in the last second. */
 		return;
 
-	/*
-	 * If this is from memcg, oom-killer is already invoked.
-	 * and not worth to go system-wide-oom.
-	 */
-	if (mem_cgroup_oom_called(current))
-		goto rest_and_return;
-
 	if (sysctl_panic_on_oom)
 		panic("out of memory from page fault. panic_on_oom is selected.\n");
 
@@ -619,7 +614,6 @@
 	 * Give "p" a good chance of killing itself before we
 	 * retry to allocate memory.
 	 */
-rest_and_return:
 	if (!test_thread_flag(TIF_MEMDIE))
 		schedule_timeout_uninterruptible(1);
 }
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a8182c89..d03c946 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -50,6 +50,7 @@
 #include <linux/kmemleak.h>
 #include <linux/memory.h>
 #include <trace/events/kmem.h>
+#include <linux/ftrace_event.h>
 
 #include <asm/tlbflush.h>
 #include <asm/div64.h>
@@ -288,10 +289,7 @@
 
 	printk(KERN_ALERT "BUG: Bad page state in process %s  pfn:%05lx\n",
 		current->comm, page_to_pfn(page));
-	printk(KERN_ALERT
-		"page:%p flags:%p count:%d mapcount:%d mapping:%p index:%lx\n",
-		page, (void *)page->flags, page_count(page),
-		page_mapcount(page), page->mapping, page->index);
+	dump_page(page);
 
 	dump_stack();
 out:
@@ -3224,7 +3222,7 @@
 	int cpu;
 	unsigned long batch = zone_batchsize(zone), flags;
 
-	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+	for_each_possible_cpu(cpu) {
 		struct per_cpu_pageset *pset;
 		struct per_cpu_pages *pcp;
 
@@ -5183,3 +5181,80 @@
 	return order < MAX_ORDER;
 }
 #endif
+
+static struct trace_print_flags pageflag_names[] = {
+	{1UL << PG_locked,		"locked"	},
+	{1UL << PG_error,		"error"		},
+	{1UL << PG_referenced,		"referenced"	},
+	{1UL << PG_uptodate,		"uptodate"	},
+	{1UL << PG_dirty,		"dirty"		},
+	{1UL << PG_lru,			"lru"		},
+	{1UL << PG_active,		"active"	},
+	{1UL << PG_slab,		"slab"		},
+	{1UL << PG_owner_priv_1,	"owner_priv_1"	},
+	{1UL << PG_arch_1,		"arch_1"	},
+	{1UL << PG_reserved,		"reserved"	},
+	{1UL << PG_private,		"private"	},
+	{1UL << PG_private_2,		"private_2"	},
+	{1UL << PG_writeback,		"writeback"	},
+#ifdef CONFIG_PAGEFLAGS_EXTENDED
+	{1UL << PG_head,		"head"		},
+	{1UL << PG_tail,		"tail"		},
+#else
+	{1UL << PG_compound,		"compound"	},
+#endif
+	{1UL << PG_swapcache,		"swapcache"	},
+	{1UL << PG_mappedtodisk,	"mappedtodisk"	},
+	{1UL << PG_reclaim,		"reclaim"	},
+	{1UL << PG_buddy,		"buddy"		},
+	{1UL << PG_swapbacked,		"swapbacked"	},
+	{1UL << PG_unevictable,		"unevictable"	},
+#ifdef CONFIG_MMU
+	{1UL << PG_mlocked,		"mlocked"	},
+#endif
+#ifdef CONFIG_ARCH_USES_PG_UNCACHED
+	{1UL << PG_uncached,		"uncached"	},
+#endif
+#ifdef CONFIG_MEMORY_FAILURE
+	{1UL << PG_hwpoison,		"hwpoison"	},
+#endif
+	{-1UL,				NULL		},
+};
+
+static void dump_page_flags(unsigned long flags)
+{
+	const char *delim = "";
+	unsigned long mask;
+	int i;
+
+	printk(KERN_ALERT "page flags: %#lx(", flags);
+
+	/* remove zone id */
+	flags &= (1UL << NR_PAGEFLAGS) - 1;
+
+	for (i = 0; pageflag_names[i].name && flags; i++) {
+
+		mask = pageflag_names[i].mask;
+		if ((flags & mask) != mask)
+			continue;
+
+		flags &= ~mask;
+		printk("%s%s", delim, pageflag_names[i].name);
+		delim = "|";
+	}
+
+	/* check for left over flags */
+	if (flags)
+		printk("%s%#lx", delim, flags);
+
+	printk(")\n");
+}
+
+void dump_page(struct page *page)
+{
+	printk(KERN_ALERT
+	       "page:%p count:%d mapcount:%d mapping:%p index:%#lx\n",
+		page, page_count(page), page_mapcount(page),
+		page->mapping, page->index);
+	dump_page_flags(page->flags);
+}
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 3d535d5..3dd8853 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -335,6 +335,37 @@
 }
 
 /**
+ * swap_cgroup_cmpxchg - cmpxchg mem_cgroup's id for this swp_entry.
+ * @end: swap entry to be cmpxchged
+ * @old: old id
+ * @new: new id
+ *
+ * Returns old id at success, 0 at failure.
+ * (There is no mem_cgroup useing 0 as its id)
+ */
+unsigned short swap_cgroup_cmpxchg(swp_entry_t ent,
+					unsigned short old, unsigned short new)
+{
+	int type = swp_type(ent);
+	unsigned long offset = swp_offset(ent);
+	unsigned long idx = offset / SC_PER_PAGE;
+	unsigned long pos = offset & SC_POS_MASK;
+	struct swap_cgroup_ctrl *ctrl;
+	struct page *mappage;
+	struct swap_cgroup *sc;
+
+	ctrl = &swap_cgroup_ctrl[type];
+
+	mappage = ctrl->map[idx];
+	sc = page_address(mappage);
+	sc += pos;
+	if (cmpxchg(&sc->id, old, new) == old)
+		return old;
+	else
+		return 0;
+}
+
+/**
  * swap_cgroup_record - record mem_cgroup for this swp_entry.
  * @ent: swap entry to be recorded into
  * @mem: mem_cgroup to be recorded
@@ -358,8 +389,7 @@
 	mappage = ctrl->map[idx];
 	sc = page_address(mappage);
 	sc += pos;
-	old = sc->id;
-	sc->id = id;
+	old = xchg(&sc->id, id);
 
 	return old;
 }
diff --git a/mm/slub.c b/mm/slub.c
index 0bfd386..b364844 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2960,7 +2960,7 @@
 			/*
 			 * if n->nr_slabs > 0, slabs still exist on the node
 			 * that is going down. We were unable to free them,
-			 * and offline_pages() function shoudn't call this
+			 * and offline_pages() function shouldn't call this
 			 * callback. So, we must fail.
 			 */
 			BUG_ON(slabs_node(s, offline_node));
@@ -4390,7 +4390,7 @@
 	kfree(s);
 }
 
-static struct sysfs_ops slab_sysfs_ops = {
+static const struct sysfs_ops slab_sysfs_ops = {
 	.show = slab_attr_show,
 	.store = slab_attr_store,
 };
@@ -4409,7 +4409,7 @@
 	return 0;
 }
 
-static struct kset_uevent_ops slab_uevent_ops = {
+static const struct kset_uevent_ops slab_uevent_ops = {
 	.filter = uevent_filter,
 };
 
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 84374d8..6cd0a8f 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -723,6 +723,37 @@
 	return p != NULL;
 }
 
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+/**
+ * mem_cgroup_count_swap_user - count the user of a swap entry
+ * @ent: the swap entry to be checked
+ * @pagep: the pointer for the swap cache page of the entry to be stored
+ *
+ * Returns the number of the user of the swap entry. The number is valid only
+ * for swaps of anonymous pages.
+ * If the entry is found on swap cache, the page is stored to pagep with
+ * refcount of it being incremented.
+ */
+int mem_cgroup_count_swap_user(swp_entry_t ent, struct page **pagep)
+{
+	struct page *page;
+	struct swap_info_struct *p;
+	int count = 0;
+
+	page = find_get_page(&swapper_space, ent.val);
+	if (page)
+		count += page_mapcount(page);
+	p = swap_info_get(ent);
+	if (p) {
+		count += swap_count(p->swap_map[swp_offset(ent)]);
+		spin_unlock(&swap_lock);
+	}
+
+	*pagep = page;
+	return count;
+}
+#endif
+
 #ifdef CONFIG_HIBERNATION
 /*
  * Find the swap type that corresponds to given device (if any).
diff --git a/net/9p/client.c b/net/9p/client.c
index bde9f3d..e3e5bf4 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -60,7 +60,7 @@
 
 inline int p9_is_proto_dotl(struct p9_client *clnt)
 {
-	return (clnt->proto_version == p9_proto_2010L);
+	return (clnt->proto_version == p9_proto_2000L);
 }
 EXPORT_SYMBOL(p9_is_proto_dotl);
 
@@ -80,9 +80,9 @@
 	} else if (!strncmp("9p2000.u", name->from, name->to-name->from)) {
 		version = p9_proto_2000u;
 		P9_DPRINTK(P9_DEBUG_9P, "Protocol version: 9P2000.u\n");
-	} else if (!strncmp("9p2010.L", name->from, name->to-name->from)) {
-		version = p9_proto_2010L;
-		P9_DPRINTK(P9_DEBUG_9P, "Protocol version: 9P2010.L\n");
+	} else if (!strncmp("9p2000.L", name->from, name->to-name->from)) {
+		version = p9_proto_2000L;
+		P9_DPRINTK(P9_DEBUG_9P, "Protocol version: 9P2000.L\n");
 	} else {
 		P9_DPRINTK(P9_DEBUG_ERROR, "Unknown protocol version %s. ",
 							name->from);
@@ -672,9 +672,9 @@
 						c->msize, c->proto_version);
 
 	switch (c->proto_version) {
-	case p9_proto_2010L:
+	case p9_proto_2000L:
 		req = p9_client_rpc(c, P9_TVERSION, "ds",
-					c->msize, "9P2010.L");
+					c->msize, "9P2000.L");
 		break;
 	case p9_proto_2000u:
 		req = p9_client_rpc(c, P9_TVERSION, "ds",
@@ -700,8 +700,8 @@
 	}
 
 	P9_DPRINTK(P9_DEBUG_9P, "<<< RVERSION msize %d %s\n", msize, version);
-	if (!strncmp(version, "9P2010.L", 8))
-		c->proto_version = p9_proto_2010L;
+	if (!strncmp(version, "9P2000.L", 8))
+		c->proto_version = p9_proto_2000L;
 	else if (!strncmp(version, "9P2000.u", 8))
 		c->proto_version = p9_proto_2000u;
 	else if (!strncmp(version, "9P2000", 6))
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index 0aaed48..afde1a8 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -78,6 +78,12 @@
 	/* Scatterlist: can be too big for stack. */
 	struct scatterlist sg[VIRTQUEUE_NUM];
 
+	int tag_len;
+	/*
+	 * tag name to identify a mount Non-null terminated
+	 */
+	char *tag;
+
 	struct list_head chan_list;
 };
 
@@ -214,6 +220,20 @@
 	return 0;
 }
 
+static ssize_t p9_mount_tag_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct virtio_chan *chan;
+	struct virtio_device *vdev;
+
+	vdev = dev_to_virtio(dev);
+	chan = vdev->priv;
+
+	return snprintf(buf, chan->tag_len + 1, "%s", chan->tag);
+}
+
+static DEVICE_ATTR(mount_tag, 0444, p9_mount_tag_show, NULL);
+
 /**
  * p9_virtio_probe - probe for existence of 9P virtio channels
  * @vdev: virtio device to probe
@@ -224,6 +244,8 @@
 
 static int p9_virtio_probe(struct virtio_device *vdev)
 {
+	__u16 tag_len;
+	char *tag;
 	int err;
 	struct virtio_chan *chan;
 
@@ -248,6 +270,28 @@
 	sg_init_table(chan->sg, VIRTQUEUE_NUM);
 
 	chan->inuse = false;
+	if (virtio_has_feature(vdev, VIRTIO_9P_MOUNT_TAG)) {
+		vdev->config->get(vdev,
+				offsetof(struct virtio_9p_config, tag_len),
+				&tag_len, sizeof(tag_len));
+	} else {
+		err = -EINVAL;
+		goto out_free_vq;
+	}
+	tag = kmalloc(tag_len, GFP_KERNEL);
+	if (!tag) {
+		err = -ENOMEM;
+		goto out_free_vq;
+	}
+	vdev->config->get(vdev, offsetof(struct virtio_9p_config, tag),
+			tag, tag_len);
+	chan->tag = tag;
+	chan->tag_len = tag_len;
+	err = sysfs_create_file(&(vdev->dev.kobj), &dev_attr_mount_tag.attr);
+	if (err) {
+		kfree(tag);
+		goto out_free_vq;
+	}
 	mutex_lock(&virtio_9p_lock);
 	list_add_tail(&chan->chan_list, &virtio_chan_list);
 	mutex_unlock(&virtio_9p_lock);
@@ -284,7 +328,7 @@
 
 	mutex_lock(&virtio_9p_lock);
 	list_for_each_entry(chan, &virtio_chan_list, chan_list) {
-		if (!strcmp(devname, dev_name(&chan->vdev->dev))) {
+		if (!strncmp(devname, chan->tag, chan->tag_len)) {
 			if (!chan->inuse) {
 				chan->inuse = true;
 				found = 1;
@@ -323,6 +367,8 @@
 	mutex_lock(&virtio_9p_lock);
 	list_del(&chan->chan_list);
 	mutex_unlock(&virtio_9p_lock);
+	sysfs_remove_file(&(vdev->dev.kobj), &dev_attr_mount_tag.attr);
+	kfree(chan->tag);
 	kfree(chan);
 
 }
@@ -332,13 +378,19 @@
 	{ 0 },
 };
 
+static unsigned int features[] = {
+	VIRTIO_9P_MOUNT_TAG,
+};
+
 /* The standard "struct lguest_driver": */
 static struct virtio_driver p9_virtio_drv = {
-	.driver.name = 	KBUILD_MODNAME,
-	.driver.owner = THIS_MODULE,
-	.id_table =	id_table,
-	.probe = 	p9_virtio_probe,
-	.remove =	p9_virtio_remove,
+	.feature_table  = features,
+	.feature_table_size = ARRAY_SIZE(features),
+	.driver.name    = KBUILD_MODNAME,
+	.driver.owner	= THIS_MODULE,
+	.id_table	= id_table,
+	.probe		= p9_virtio_probe,
+	.remove		= p9_virtio_remove,
 };
 
 static struct p9_trans_module p9_virtio_trans = {
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index 1a79a6c..cafb55b 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -3,6 +3,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/debugfs.h>
+#include <linux/seq_file.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -405,20 +406,11 @@
 	.release = bt_host_release,
 };
 
-static int inquiry_cache_open(struct inode *inode, struct file *file)
+static int inquiry_cache_show(struct seq_file *f, void *p)
 {
-	file->private_data = inode->i_private;
-	return 0;
-}
-
-static ssize_t inquiry_cache_read(struct file *file, char __user *userbuf,
-						size_t count, loff_t *ppos)
-{
-	struct hci_dev *hdev = file->private_data;
+	struct hci_dev *hdev = f->private;
 	struct inquiry_cache *cache = &hdev->inq_cache;
 	struct inquiry_entry *e;
-	char buf[4096];
-	int n = 0;
 
 	hci_dev_lock_bh(hdev);
 
@@ -426,23 +418,30 @@
 		struct inquiry_data *data = &e->data;
 		bdaddr_t bdaddr;
 		baswap(&bdaddr, &data->bdaddr);
-		n += sprintf(buf + n, "%s %d %d %d 0x%.2x%.2x%.2x 0x%.4x %d %d %u\n",
-				batostr(&bdaddr),
-				data->pscan_rep_mode, data->pscan_period_mode,
-				data->pscan_mode, data->dev_class[2],
-				data->dev_class[1], data->dev_class[0],
-				__le16_to_cpu(data->clock_offset),
-				data->rssi, data->ssp_mode, e->timestamp);
+		seq_printf(f, "%s %d %d %d 0x%.2x%.2x%.2x 0x%.4x %d %d %u\n",
+			   batostr(&bdaddr),
+			   data->pscan_rep_mode, data->pscan_period_mode,
+			   data->pscan_mode, data->dev_class[2],
+			   data->dev_class[1], data->dev_class[0],
+			   __le16_to_cpu(data->clock_offset),
+			   data->rssi, data->ssp_mode, e->timestamp);
 	}
 
 	hci_dev_unlock_bh(hdev);
 
-	return simple_read_from_buffer(userbuf, count, ppos, buf, n);
+	return 0;
+}
+
+static int inquiry_cache_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, inquiry_cache_show, inode->i_private);
 }
 
 static const struct file_operations inquiry_cache_fops = {
-	.open = inquiry_cache_open,
-	.read = inquiry_cache_read,
+	.open		= inquiry_cache_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
 };
 
 int hci_register_sysfs(struct hci_dev *hdev)
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 400efa2..4db7ae2 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -3937,7 +3937,9 @@
 	return 0;
 }
 
-static ssize_t l2cap_sysfs_show(struct class *dev, char *buf)
+static ssize_t l2cap_sysfs_show(struct class *dev,
+				struct class_attribute *attr,
+				char *buf)
 {
 	struct sock *sk;
 	struct hlist_node *node;
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 89f4a59..db8a68e 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -2098,7 +2098,9 @@
 	.security_cfm	= rfcomm_security_cfm
 };
 
-static ssize_t rfcomm_dlc_sysfs_show(struct class *dev, char *buf)
+static ssize_t rfcomm_dlc_sysfs_show(struct class *dev,
+				     struct class_attribute *attr,
+				     char *buf)
 {
 	struct rfcomm_session *s;
 	struct list_head *pp, *p;
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 4b5968d..ca87d6a 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -1061,7 +1061,9 @@
 	return result;
 }
 
-static ssize_t rfcomm_sock_sysfs_show(struct class *dev, char *buf)
+static ssize_t rfcomm_sock_sysfs_show(struct class *dev,
+				      struct class_attribute *attr,
+				      char *buf)
 {
 	struct sock *sk;
 	struct hlist_node *node;
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index dd8f6ec..f93b939 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -953,7 +953,9 @@
 	return 0;
 }
 
-static ssize_t sco_sysfs_show(struct class *dev, char *buf)
+static ssize_t sco_sysfs_show(struct class *dev,
+				struct class_attribute *attr,
+				char *buf)
 {
 	struct sock *sk;
 	struct hlist_node *node;
diff --git a/net/bridge/Kconfig b/net/bridge/Kconfig
index 19a6b96..d115d5c 100644
--- a/net/bridge/Kconfig
+++ b/net/bridge/Kconfig
@@ -35,6 +35,7 @@
 config BRIDGE_IGMP_SNOOPING
 	bool "IGMP snooping"
 	depends on BRIDGE
+	depends on INET
 	default y
 	---help---
 	  If you say Y here, then the Ethernet bridge will be able selectively
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 2559fb5..fd96a8d 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -38,7 +38,7 @@
 	struct net_bridge_mdb_entry *mp;
 	struct hlist_node *p;
 
-	hlist_for_each_entry(mp, p, &mdb->mhash[hash], hlist[mdb->ver]) {
+	hlist_for_each_entry_rcu(mp, p, &mdb->mhash[hash], hlist[mdb->ver]) {
 		if (dst == mp->addr)
 			return mp;
 	}
@@ -627,8 +627,8 @@
 	struct net_bridge *br = port->br;
 
 	spin_lock(&br->multicast_lock);
-	if (port && (port->state == BR_STATE_DISABLED ||
-		     port->state == BR_STATE_BLOCKING))
+	if (port->state == BR_STATE_DISABLED ||
+	    port->state == BR_STATE_BLOCKING)
 		goto out;
 
 	if (port->multicast_startup_queries_sent <
@@ -823,6 +823,7 @@
 	unsigned long max_delay;
 	unsigned long now = jiffies;
 	__be32 group;
+	int err = 0;
 
 	spin_lock(&br->multicast_lock);
 	if (!netif_running(br->dev) ||
@@ -841,12 +842,14 @@
 			group = 0;
 		}
 	} else {
-		if (!pskb_may_pull(skb, sizeof(struct igmpv3_query)))
-			return -EINVAL;
+		if (!pskb_may_pull(skb, sizeof(struct igmpv3_query))) {
+			err = -EINVAL;
+			goto out;
+		}
 
 		ih3 = igmpv3_query_hdr(skb);
 		if (ih3->nsrcs)
-			return 0;
+			goto out;
 
 		max_delay = ih3->code ? 1 :
 			    IGMPV3_MRC(ih3->code) * (HZ / IGMP_TIMER_SCALE);
@@ -876,7 +879,7 @@
 
 out:
 	spin_unlock(&br->multicast_lock);
-	return 0;
+	return err;
 }
 
 static void br_multicast_leave_group(struct net_bridge *br,
@@ -1135,7 +1138,7 @@
 
 	if (mdb->old) {
 		spin_unlock_bh(&br->multicast_lock);
-		synchronize_rcu_bh();
+		rcu_barrier_bh();
 		spin_lock_bh(&br->multicast_lock);
 		WARN_ON(mdb->old);
 	}
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 1cf2cef..fef0384 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -423,7 +423,7 @@
 
 #ifdef CONFIG_SYSFS
 /* br_sysfs_if.c */
-extern struct sysfs_ops brport_sysfs_ops;
+extern const struct sysfs_ops brport_sysfs_ops;
 extern int br_sysfs_addif(struct net_bridge_port *p);
 
 /* br_sysfs_br.c */
diff --git a/net/bridge/br_sysfs_if.c b/net/bridge/br_sysfs_if.c
index 696596c..0b99164 100644
--- a/net/bridge/br_sysfs_if.c
+++ b/net/bridge/br_sysfs_if.c
@@ -238,7 +238,7 @@
 	return ret;
 }
 
-struct sysfs_ops brport_sysfs_ops = {
+const struct sysfs_ops brport_sysfs_ops = {
 	.show = brport_show,
 	.store = brport_store,
 };
diff --git a/net/core/dev_mcast.c b/net/core/dev_mcast.c
index fd91569..3dc295b 100644
--- a/net/core/dev_mcast.c
+++ b/net/core/dev_mcast.c
@@ -97,8 +97,9 @@
 
 	netif_addr_lock_bh(dev);
 	if (alen != dev->addr_len)
-		return -EINVAL;
-	err = __dev_addr_add(&dev->mc_list, &dev->mc_count, addr, alen, glbl);
+		err = -EINVAL;
+	else
+		err = __dev_addr_add(&dev->mc_list, &dev->mc_count, addr, alen, glbl);
 	if (!err)
 		__dev_set_rx_mode(dev);
 	netif_addr_unlock_bh(dev);
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 0f2f821..f4cb6b6 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/ethtool.h>
 #include <linux/netdevice.h>
+#include <linux/bitops.h>
 #include <asm/uaccess.h>
 
 /*
@@ -199,10 +200,7 @@
 	return dev->ethtool_ops->set_settings(dev, &cmd);
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_get_drvinfo(struct net_device *dev, void __user *useraddr)
+static noinline_for_stack int ethtool_get_drvinfo(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_drvinfo info;
 	const struct ethtool_ops *ops = dev->ethtool_ops;
@@ -214,6 +212,10 @@
 	info.cmd = ETHTOOL_GDRVINFO;
 	ops->get_drvinfo(dev, &info);
 
+	/*
+	 * this method of obtaining string set info is deprecated;
+	 * Use ETHTOOL_GSSET_INFO instead.
+	 */
 	if (ops->get_sset_count) {
 		int rc;
 
@@ -237,10 +239,67 @@
 	return 0;
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_set_rxnfc(struct net_device *dev, void __user *useraddr)
+static noinline_for_stack int ethtool_get_sset_info(struct net_device *dev,
+                                          void __user *useraddr)
+{
+	struct ethtool_sset_info info;
+	const struct ethtool_ops *ops = dev->ethtool_ops;
+	u64 sset_mask;
+	int i, idx = 0, n_bits = 0, ret, rc;
+	u32 *info_buf = NULL;
+
+	if (!ops->get_sset_count)
+		return -EOPNOTSUPP;
+
+	if (copy_from_user(&info, useraddr, sizeof(info)))
+		return -EFAULT;
+
+	/* store copy of mask, because we zero struct later on */
+	sset_mask = info.sset_mask;
+	if (!sset_mask)
+		return 0;
+
+	/* calculate size of return buffer */
+	n_bits = hweight64(sset_mask);
+
+	memset(&info, 0, sizeof(info));
+	info.cmd = ETHTOOL_GSSET_INFO;
+
+	info_buf = kzalloc(n_bits * sizeof(u32), GFP_USER);
+	if (!info_buf)
+		return -ENOMEM;
+
+	/*
+	 * fill return buffer based on input bitmask and successful
+	 * get_sset_count return
+	 */
+	for (i = 0; i < 64; i++) {
+		if (!(sset_mask & (1ULL << i)))
+			continue;
+
+		rc = ops->get_sset_count(dev, i);
+		if (rc >= 0) {
+			info.sset_mask |= (1ULL << i);
+			info_buf[idx++] = rc;
+		}
+	}
+
+	ret = -EFAULT;
+	if (copy_to_user(useraddr, &info, sizeof(info)))
+		goto out;
+
+	useraddr += offsetof(struct ethtool_sset_info, data);
+	if (copy_to_user(useraddr, info_buf, idx * sizeof(u32)))
+		goto out;
+
+	ret = 0;
+
+out:
+	kfree(info_buf);
+	return ret;
+}
+
+static noinline_for_stack int ethtool_set_rxnfc(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_rxnfc cmd;
 
@@ -253,10 +312,7 @@
 	return dev->ethtool_ops->set_rxnfc(dev, &cmd);
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_get_rxnfc(struct net_device *dev, void __user *useraddr)
+static noinline_for_stack int ethtool_get_rxnfc(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_rxnfc info;
 	const struct ethtool_ops *ops = dev->ethtool_ops;
@@ -328,10 +384,7 @@
 	list->count++;
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_set_rx_ntuple(struct net_device *dev, void __user *useraddr)
+static noinline_for_stack int ethtool_set_rx_ntuple(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_rx_ntuple cmd;
 	const struct ethtool_ops *ops = dev->ethtool_ops;
@@ -799,10 +852,7 @@
 	return ret;
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_get_coalesce(struct net_device *dev, void __user *useraddr)
+static noinline_for_stack int ethtool_get_coalesce(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_coalesce coalesce = { .cmd = ETHTOOL_GCOALESCE };
 
@@ -816,10 +866,7 @@
 	return 0;
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_set_coalesce(struct net_device *dev, void __user *useraddr)
+static noinline_for_stack int ethtool_set_coalesce(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_coalesce coalesce;
 
@@ -1229,10 +1276,7 @@
 	return actor(dev, edata.data);
 }
 
-/*
- * noinline attribute so that gcc doesnt use too much stack in dev_ethtool()
- */
-static noinline int ethtool_flash_device(struct net_device *dev, char __user *useraddr)
+static noinline_for_stack int ethtool_flash_device(struct net_device *dev, char __user *useraddr)
 {
 	struct ethtool_flash efl;
 
@@ -1471,6 +1515,9 @@
 	case ETHTOOL_GRXNTUPLE:
 		rc = ethtool_get_rx_ntuple(dev, useraddr);
 		break;
+	case ETHTOOL_GSSET_INFO:
+		rc = ethtool_get_sset_info(dev, useraddr);
+		break;
 	default:
 		rc = -EOPNOTSUPP;
 	}
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index d102f6d..6cee643 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -771,6 +771,8 @@
 }
 
 static void neigh_invalidate(struct neighbour *neigh)
+	__releases(neigh->lock)
+	__acquires(neigh->lock)
 {
 	struct sk_buff *skb;
 
diff --git a/net/core/sock.c b/net/core/sock.c
index fcd397a..c5812bb 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -340,8 +340,12 @@
 		rc = sk_backlog_rcv(sk, skb);
 
 		mutex_release(&sk->sk_lock.dep_map, 1, _RET_IP_);
-	} else
-		sk_add_backlog(sk, skb);
+	} else if (sk_add_backlog(sk, skb)) {
+		bh_unlock_sock(sk);
+		atomic_inc(&sk->sk_drops);
+		goto discard_and_relse;
+	}
+
 	bh_unlock_sock(sk);
 out:
 	sock_put(sk);
@@ -1139,6 +1143,7 @@
 		sock_lock_init(newsk);
 		bh_lock_sock(newsk);
 		newsk->sk_backlog.head	= newsk->sk_backlog.tail = NULL;
+		newsk->sk_backlog.len = 0;
 
 		atomic_set(&newsk->sk_rmem_alloc, 0);
 		/*
@@ -1542,6 +1547,12 @@
 
 		bh_lock_sock(sk);
 	} while ((skb = sk->sk_backlog.head) != NULL);
+
+	/*
+	 * Doing the zeroing here guarantee we can not loop forever
+	 * while a wild producer attempts to flood us.
+	 */
+	sk->sk_backlog.len = 0;
 }
 
 /**
@@ -1874,6 +1885,7 @@
 	sk->sk_allocation	=	GFP_KERNEL;
 	sk->sk_rcvbuf		=	sysctl_rmem_default;
 	sk->sk_sndbuf		=	sysctl_wmem_default;
+	sk->sk_backlog.limit	=	sk->sk_rcvbuf << 1;
 	sk->sk_state		=	TCP_CLOSE;
 	sk_set_socket(sk, sock);
 
@@ -2276,7 +2288,8 @@
 		prot->rsk_prot->slab = NULL;
 	}
 out_free_request_sock_slab_name:
-	kfree(prot->rsk_prot->slab_name);
+	if (prot->rsk_prot)
+		kfree(prot->rsk_prot->slab_name);
 out_free_sock_slab:
 	kmem_cache_destroy(prot->slab);
 	prot->slab = NULL;
diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c
index af226a0..0d508c3 100644
--- a/net/dccp/minisocks.c
+++ b/net/dccp/minisocks.c
@@ -254,7 +254,7 @@
 		 * in main socket hash table and lock on listening
 		 * socket does not protect us more.
 		 */
-		sk_add_backlog(child, skb);
+		__sk_add_backlog(child, skb);
 	}
 
 	bh_unlock_sock(child);
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index c0c5274..f47c9f7 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -1144,12 +1144,9 @@
 
 	if (saddr)
 		memcpy(&iph->saddr, saddr, 4);
-
-	if (daddr) {
+	if (daddr)
 		memcpy(&iph->daddr, daddr, 4);
-		return t->hlen;
-	}
-	if (iph->daddr && !ipv4_is_multicast(iph->daddr))
+	if (iph->daddr)
 		return t->hlen;
 
 	return -t->hlen;
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 10a6a60..6789092 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -187,6 +187,16 @@
 static struct ic_device *ic_first_dev __initdata = NULL;/* List of open device */
 static struct net_device *ic_dev __initdata = NULL;	/* Selected device */
 
+static bool __init ic_device_match(struct net_device *dev)
+{
+	if (user_dev_name[0] ? !strcmp(dev->name, user_dev_name) :
+	    (!(dev->flags & IFF_LOOPBACK) &&
+	     (dev->flags & (IFF_POINTOPOINT|IFF_BROADCAST)) &&
+	     strncmp(dev->name, "dummy", 5)))
+		return true;
+	return false;
+}
+
 static int __init ic_open_devs(void)
 {
 	struct ic_device *d, **last;
@@ -207,10 +217,7 @@
 	for_each_netdev(&init_net, dev) {
 		if (dev->flags & IFF_LOOPBACK)
 			continue;
-		if (user_dev_name[0] ? !strcmp(dev->name, user_dev_name) :
-		    (!(dev->flags & IFF_LOOPBACK) &&
-		     (dev->flags & (IFF_POINTOPOINT|IFF_BROADCAST)) &&
-		     strncmp(dev->name, "dummy", 5))) {
+		if (ic_device_match(dev)) {
 			int able = 0;
 			if (dev->mtu >= 364)
 				able |= IC_BOOTP;
@@ -228,7 +235,7 @@
 			}
 			if (!(d = kmalloc(sizeof(struct ic_device), GFP_KERNEL))) {
 				rtnl_unlock();
-				return -1;
+				return -ENOMEM;
 			}
 			d->dev = dev;
 			*last = d;
@@ -253,7 +260,7 @@
 			printk(KERN_ERR "IP-Config: Device `%s' not found.\n", user_dev_name);
 		else
 			printk(KERN_ERR "IP-Config: No network devices available.\n");
-		return -1;
+		return -ENODEV;
 	}
 	return 0;
 }
@@ -1303,6 +1310,32 @@
 	return addr;
 }
 
+#define DEVICE_WAIT_MAX		12 /* 12 seconds */
+
+static int __init wait_for_devices(void)
+{
+	int i;
+
+	msleep(CONF_PRE_OPEN);
+	for (i = 0; i < DEVICE_WAIT_MAX; i++) {
+		struct net_device *dev;
+		int found = 0;
+
+		rtnl_lock();
+		for_each_netdev(&init_net, dev) {
+			if (ic_device_match(dev)) {
+				found = 1;
+				break;
+			}
+		}
+		rtnl_unlock();
+		if (found)
+			return 0;
+		ssleep(1);
+	}
+	return -ENODEV;
+}
+
 /*
  *	IP Autoconfig dispatcher.
  */
@@ -1313,6 +1346,7 @@
 #ifdef IPCONFIG_DYNAMIC
 	int retries = CONF_OPEN_RETRIES;
 #endif
+	int err;
 
 #ifdef CONFIG_PROC_FS
 	proc_net_fops_create(&init_net, "pnp", S_IRUGO, &pnp_seq_fops);
@@ -1325,12 +1359,15 @@
 #ifdef IPCONFIG_DYNAMIC
  try_try_again:
 #endif
-	/* Give hardware a chance to settle */
-	msleep(CONF_PRE_OPEN);
+	/* Wait for devices to appear */
+	err = wait_for_devices();
+	if (err)
+		return err;
 
 	/* Setup all network devices */
-	if (ic_open_devs() < 0)
-		return -1;
+	err = ic_open_devs();
+	if (err)
+		return err;
 
 	/* Give drivers a chance to settle */
 	ssleep(CONF_POST_OPEN);
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 242ed23..4f1f337 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -249,6 +249,8 @@
 	SNMP_MIB_ITEM("TCPSackShifted", LINUX_MIB_SACKSHIFTED),
 	SNMP_MIB_ITEM("TCPSackMerged", LINUX_MIB_SACKMERGED),
 	SNMP_MIB_ITEM("TCPSackShiftFallback", LINUX_MIB_SACKSHIFTFALLBACK),
+	SNMP_MIB_ITEM("TCPBacklogDrop", LINUX_MIB_TCPBACKLOGDROP),
+	SNMP_MIB_ITEM("TCPMinTTLDrop", LINUX_MIB_TCPMINTTLDROP),
 	SNMP_MIB_SENTINEL
 };
 
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index b2ba558..d9b4024 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -146,7 +146,6 @@
 static void		 ipv4_link_failure(struct sk_buff *skb);
 static void		 ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu);
 static int rt_garbage_collect(struct dst_ops *ops);
-static void rt_emergency_hash_rebuild(struct net *net);
 
 
 static struct dst_ops ipv4_dst_ops = {
@@ -780,11 +779,30 @@
 #define FRACT_BITS 3
 #define ONE (1UL << FRACT_BITS)
 
+/*
+ * Given a hash chain and an item in this hash chain,
+ * find if a previous entry has the same hash_inputs
+ * (but differs on tos, mark or oif)
+ * Returns 0 if an alias is found.
+ * Returns ONE if rth has no alias before itself.
+ */
+static int has_noalias(const struct rtable *head, const struct rtable *rth)
+{
+	const struct rtable *aux = head;
+
+	while (aux != rth) {
+		if (compare_hash_inputs(&aux->fl, &rth->fl))
+			return 0;
+		aux = aux->u.dst.rt_next;
+	}
+	return ONE;
+}
+
 static void rt_check_expire(void)
 {
 	static unsigned int rover;
 	unsigned int i = rover, goal;
-	struct rtable *rth, *aux, **rthp;
+	struct rtable *rth, **rthp;
 	unsigned long samples = 0;
 	unsigned long sum = 0, sum2 = 0;
 	unsigned long delta;
@@ -835,15 +853,7 @@
 					 * attributes don't unfairly skew
 					 * the length computation
 					 */
-					for (aux = rt_hash_table[i].chain;;) {
-						if (aux == rth) {
-							length += ONE;
-							break;
-						}
-						if (compare_hash_inputs(&aux->fl, &rth->fl))
-							break;
-						aux = aux->u.dst.rt_next;
-					}
+					length += has_noalias(rt_hash_table[i].chain, rth);
 					continue;
 				}
 			} else if (!rt_may_expire(rth, tmo, ip_rt_gc_timeout))
@@ -1073,6 +1083,21 @@
 out:	return 0;
 }
 
+/*
+ * Returns number of entries in a hash chain that have different hash_inputs
+ */
+static int slow_chain_length(const struct rtable *head)
+{
+	int length = 0;
+	const struct rtable *rth = head;
+
+	while (rth) {
+		length += has_noalias(head, rth);
+		rth = rth->u.dst.rt_next;
+	}
+	return length >> FRACT_BITS;
+}
+
 static int rt_intern_hash(unsigned hash, struct rtable *rt,
 			  struct rtable **rp, struct sk_buff *skb)
 {
@@ -1185,7 +1210,8 @@
 			rt_free(cand);
 		}
 	} else {
-		if (chain_length > rt_chain_length_max) {
+		if (chain_length > rt_chain_length_max &&
+		    slow_chain_length(rt_hash_table[hash].chain) > rt_chain_length_max) {
 			struct net *net = dev_net(rt->u.dst.dev);
 			int num = ++net->ipv4.current_rt_cache_rebuild_count;
 			if (!rt_caching(dev_net(rt->u.dst.dev))) {
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index c3588b4..70df409 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1651,13 +1651,15 @@
 	if (!sk)
 		goto no_tcp_socket;
 
-	if (iph->ttl < inet_sk(sk)->min_ttl)
-		goto discard_and_relse;
-
 process:
 	if (sk->sk_state == TCP_TIME_WAIT)
 		goto do_time_wait;
 
+	if (unlikely(iph->ttl < inet_sk(sk)->min_ttl)) {
+		NET_INC_STATS_BH(net, LINUX_MIB_TCPMINTTLDROP);
+		goto discard_and_relse;
+	}
+
 	if (!xfrm4_policy_check(sk, XFRM_POLICY_IN, skb))
 		goto discard_and_relse;
 	nf_reset(skb);
@@ -1682,8 +1684,11 @@
 			if (!tcp_prequeue(sk, skb))
 				ret = tcp_v4_do_rcv(sk, skb);
 		}
-	} else
-		sk_add_backlog(sk, skb);
+	} else if (unlikely(sk_add_backlog(sk, skb))) {
+		bh_unlock_sock(sk);
+		NET_INC_STATS_BH(net, LINUX_MIB_TCPBACKLOGDROP);
+		goto discard_and_relse;
+	}
 	bh_unlock_sock(sk);
 
 	sock_put(sk);
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index f206ee5..4199bc6 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -728,7 +728,7 @@
 		 * in main socket hash table and lock on listening
 		 * socket does not protect us more.
 		 */
-		sk_add_backlog(child, skb);
+		__sk_add_backlog(child, skb);
 	}
 
 	bh_unlock_sock(child);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 4a1605d..f181b78 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2395,13 +2395,17 @@
 	struct tcp_extend_values *xvp = tcp_xv(rvp);
 	struct inet_request_sock *ireq = inet_rsk(req);
 	struct tcp_sock *tp = tcp_sk(sk);
+	const struct tcp_cookie_values *cvp = tp->cookie_values;
 	struct tcphdr *th;
 	struct sk_buff *skb;
 	struct tcp_md5sig_key *md5;
 	int tcp_header_size;
 	int mss;
+	int s_data_desired = 0;
 
-	skb = sock_wmalloc(sk, MAX_TCP_HEADER + 15, 1, GFP_ATOMIC);
+	if (cvp != NULL && cvp->s_data_constant && cvp->s_data_desired)
+		s_data_desired = cvp->s_data_desired;
+	skb = sock_wmalloc(sk, MAX_TCP_HEADER + 15 + s_data_desired, 1, GFP_ATOMIC);
 	if (skb == NULL)
 		return NULL;
 
@@ -2457,16 +2461,12 @@
 			     TCPCB_FLAG_SYN | TCPCB_FLAG_ACK);
 
 	if (OPTION_COOKIE_EXTENSION & opts.options) {
-		const struct tcp_cookie_values *cvp = tp->cookie_values;
-
-		if (cvp != NULL &&
-		    cvp->s_data_constant &&
-		    cvp->s_data_desired > 0) {
-			u8 *buf = skb_put(skb, cvp->s_data_desired);
+		if (s_data_desired) {
+			u8 *buf = skb_put(skb, s_data_desired);
 
 			/* copy data directly from the listening socket. */
-			memcpy(buf, cvp->s_data_payload, cvp->s_data_desired);
-			TCP_SKB_CB(skb)->end_seq += cvp->s_data_desired;
+			memcpy(buf, cvp->s_data_payload, s_data_desired);
+			TCP_SKB_CB(skb)->end_seq += s_data_desired;
 		}
 
 		if (opts.hash_size > 0) {
diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
index a17629b..b2e6bbc 100644
--- a/net/ipv4/tcp_timer.c
+++ b/net/ipv4/tcp_timer.c
@@ -134,7 +134,7 @@
 }
 
 /* This function calculates a "timeout" which is equivalent to the timeout of a
- * TCP connection after "boundary" unsucessful, exponentially backed-off
+ * TCP connection after "boundary" unsuccessful, exponentially backed-off
  * retransmissions with an initial RTO of TCP_RTO_MIN.
  */
 static bool retransmits_timed_out(struct sock *sk,
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 608a544..7af756d 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1371,8 +1371,10 @@
 	bh_lock_sock(sk);
 	if (!sock_owned_by_user(sk))
 		rc = __udp_queue_rcv_skb(sk, skb);
-	else
-		sk_add_backlog(sk, skb);
+	else if (sk_add_backlog(sk, skb)) {
+		bh_unlock_sock(sk);
+		goto drop;
+	}
 	bh_unlock_sock(sk);
 
 	return rc;
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 67107d6..e4a1483 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -91,11 +91,12 @@
 	return 0;
 }
 
-static int xfrm4_fill_dst(struct xfrm_dst *xdst, struct net_device *dev)
+static int xfrm4_fill_dst(struct xfrm_dst *xdst, struct net_device *dev,
+			  struct flowi *fl)
 {
 	struct rtable *rt = (struct rtable *)xdst->route;
 
-	xdst->u.rt.fl = rt->fl;
+	xdst->u.rt.fl = *fl;
 
 	xdst->u.dst.dev = dev;
 	dev_hold(dev);
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 88fd8c5..3381b43 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1380,6 +1380,8 @@
 		if (dad_failed)
 			ifp->flags |= IFA_F_DADFAILED;
 		spin_unlock_bh(&ifp->lock);
+		if (dad_failed)
+			ipv6_ifa_notify(0, ifp);
 		in6_ifa_put(ifp);
 #ifdef CONFIG_IPV6_PRIVACY
 	} else if (ifp->flags&IFA_F_TEMPORARY) {
@@ -2615,7 +2617,7 @@
 static int addrconf_ifdown(struct net_device *dev, int how)
 {
 	struct inet6_dev *idev;
-	struct inet6_ifaddr *ifa, **bifa;
+	struct inet6_ifaddr *ifa, *keep_list, **bifa;
 	struct net *net = dev_net(dev);
 	int i;
 
@@ -2649,11 +2651,11 @@
 		write_lock_bh(&addrconf_hash_lock);
 		while ((ifa = *bifa) != NULL) {
 			if (ifa->idev == idev &&
-			    (how || !(ifa->flags&IFA_F_PERMANENT))) {
+			    (how || !(ifa->flags&IFA_F_PERMANENT) ||
+			     ipv6_addr_type(&ifa->addr) & IPV6_ADDR_LINKLOCAL)) {
 				*bifa = ifa->lst_next;
 				ifa->lst_next = NULL;
-				addrconf_del_timer(ifa);
-				in6_ifa_put(ifa);
+				__in6_ifa_put(ifa);
 				continue;
 			}
 			bifa = &ifa->lst_next;
@@ -2689,31 +2691,51 @@
 		write_lock_bh(&idev->lock);
 	}
 #endif
-	bifa = &idev->addr_list;
-	while ((ifa = *bifa) != NULL) {
-		if (how == 0 && (ifa->flags&IFA_F_PERMANENT)) {
-			/* Retain permanent address on admin down */
+	keep_list = NULL;
+	bifa = &keep_list;
+	while ((ifa = idev->addr_list) != NULL) {
+		idev->addr_list = ifa->if_next;
+		ifa->if_next = NULL;
+
+		addrconf_del_timer(ifa);
+
+		/* If just doing link down, and address is permanent
+		   and not link-local, then retain it. */
+		if (how == 0 &&
+		    (ifa->flags&IFA_F_PERMANENT) &&
+		    !(ipv6_addr_type(&ifa->addr) & IPV6_ADDR_LINKLOCAL)) {
+
+			/* Move to holding list */
+			*bifa = ifa;
 			bifa = &ifa->if_next;
 
-			/* Restart DAD if needed when link comes back up */
-			if ( !((dev->flags&(IFF_NOARP|IFF_LOOPBACK)) ||
-			       idev->cnf.accept_dad <= 0 ||
-			       (ifa->flags & IFA_F_NODAD)))
-				ifa->flags |= IFA_F_TENTATIVE;
+			/* If not doing DAD on this address, just keep it. */
+			if ((dev->flags&(IFF_NOARP|IFF_LOOPBACK)) ||
+			    idev->cnf.accept_dad <= 0 ||
+			    (ifa->flags & IFA_F_NODAD))
+				continue;
+
+			/* If it was tentative already, no need to notify */
+			if (ifa->flags & IFA_F_TENTATIVE)
+				continue;
+
+			/* Flag it for later restoration when link comes up */
+			ifa->flags |= IFA_F_TENTATIVE;
+			in6_ifa_hold(ifa);
 		} else {
-			*bifa = ifa->if_next;
-			ifa->if_next = NULL;
-
 			ifa->dead = 1;
-			write_unlock_bh(&idev->lock);
-
-			__ipv6_ifa_notify(RTM_DELADDR, ifa);
-			atomic_notifier_call_chain(&inet6addr_chain, NETDEV_DOWN, ifa);
-			in6_ifa_put(ifa);
-
-			write_lock_bh(&idev->lock);
 		}
+		write_unlock_bh(&idev->lock);
+
+		__ipv6_ifa_notify(RTM_DELADDR, ifa);
+		atomic_notifier_call_chain(&inet6addr_chain, NETDEV_DOWN, ifa);
+		in6_ifa_put(ifa);
+
+		write_lock_bh(&idev->lock);
 	}
+
+	idev->addr_list = keep_list;
+
 	write_unlock_bh(&idev->lock);
 
 	/* Step 5: Discard multicast list */
@@ -2739,28 +2761,29 @@
 static void addrconf_rs_timer(unsigned long data)
 {
 	struct inet6_ifaddr *ifp = (struct inet6_ifaddr *) data;
+	struct inet6_dev *idev = ifp->idev;
 
-	if (ifp->idev->cnf.forwarding)
+	read_lock(&idev->lock);
+	if (idev->dead || !(idev->if_flags & IF_READY))
 		goto out;
 
-	if (ifp->idev->if_flags & IF_RA_RCVD) {
-		/*
-		 *	Announcement received after solicitation
-		 *	was sent
-		 */
+	if (idev->cnf.forwarding)
 		goto out;
-	}
+
+	/* Announcement received after solicitation was sent */
+	if (idev->if_flags & IF_RA_RCVD)
+		goto out;
 
 	spin_lock(&ifp->lock);
-	if (ifp->probes++ < ifp->idev->cnf.rtr_solicits) {
+	if (ifp->probes++ < idev->cnf.rtr_solicits) {
 		/* The wait after the last probe can be shorter */
 		addrconf_mod_timer(ifp, AC_RS,
-				   (ifp->probes == ifp->idev->cnf.rtr_solicits) ?
-				   ifp->idev->cnf.rtr_solicit_delay :
-				   ifp->idev->cnf.rtr_solicit_interval);
+				   (ifp->probes == idev->cnf.rtr_solicits) ?
+				   idev->cnf.rtr_solicit_delay :
+				   idev->cnf.rtr_solicit_interval);
 		spin_unlock(&ifp->lock);
 
-		ndisc_send_rs(ifp->idev->dev, &ifp->addr, &in6addr_linklocal_allrouters);
+		ndisc_send_rs(idev->dev, &ifp->addr, &in6addr_linklocal_allrouters);
 	} else {
 		spin_unlock(&ifp->lock);
 		/*
@@ -2768,10 +2791,11 @@
 		 * assumption any longer.
 		 */
 		printk(KERN_DEBUG "%s: no IPv6 routers present\n",
-		       ifp->idev->dev->name);
+		       idev->dev->name);
 	}
 
 out:
+	read_unlock(&idev->lock);
 	in6_ifa_put(ifp);
 }
 
@@ -2850,9 +2874,9 @@
 	struct inet6_dev *idev = ifp->idev;
 	struct in6_addr mcaddr;
 
-	read_lock_bh(&idev->lock);
-	if (idev->dead) {
-		read_unlock_bh(&idev->lock);
+	read_lock(&idev->lock);
+	if (idev->dead || !(idev->if_flags & IF_READY)) {
+		read_unlock(&idev->lock);
 		goto out;
 	}
 
@@ -2864,7 +2888,7 @@
 
 		ifp->flags &= ~(IFA_F_TENTATIVE|IFA_F_OPTIMISTIC|IFA_F_DADFAILED);
 		spin_unlock(&ifp->lock);
-		read_unlock_bh(&idev->lock);
+		read_unlock(&idev->lock);
 
 		addrconf_dad_completed(ifp);
 
@@ -2874,7 +2898,7 @@
 	ifp->probes--;
 	addrconf_mod_timer(ifp, AC_DAD, ifp->idev->nd_parms->retrans_time);
 	spin_unlock(&ifp->lock);
-	read_unlock_bh(&idev->lock);
+	read_unlock(&idev->lock);
 
 	/* send a neighbour solicitation for our addr */
 	addrconf_addr_solict_mult(&ifp->addr, &mcaddr);
diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index 551882b..5e463c43 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -84,18 +84,11 @@
 		if ((rule->flags & FIB_RULE_FIND_SADDR) &&
 		    r->src.plen && !(flags & RT6_LOOKUP_F_HAS_SADDR)) {
 			struct in6_addr saddr;
-			unsigned int srcprefs = 0;
-
-			if (flags & RT6_LOOKUP_F_SRCPREF_TMP)
-				srcprefs |= IPV6_PREFER_SRC_TMP;
-			if (flags & RT6_LOOKUP_F_SRCPREF_PUBLIC)
-				srcprefs |= IPV6_PREFER_SRC_PUBLIC;
-			if (flags & RT6_LOOKUP_F_SRCPREF_COA)
-				srcprefs |= IPV6_PREFER_SRC_COA;
 
 			if (ipv6_dev_get_saddr(net,
 					       ip6_dst_idev(&rt->u.dst)->dev,
-					       &flp->fl6_dst, srcprefs,
+					       &flp->fl6_dst,
+					       rt6_flags2srcprefs(flags),
 					       &saddr))
 				goto again;
 			if (!ipv6_prefix_equal(&saddr, &r->src.addr,
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index b08879e..52cd3ef 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -819,15 +819,8 @@
 
 	if (!ipv6_addr_any(&fl->fl6_src))
 		flags |= RT6_LOOKUP_F_HAS_SADDR;
-	else if (sk) {
-		unsigned int prefs = inet6_sk(sk)->srcprefs;
-		if (prefs & IPV6_PREFER_SRC_TMP)
-			flags |= RT6_LOOKUP_F_SRCPREF_TMP;
-		if (prefs & IPV6_PREFER_SRC_PUBLIC)
-			flags |= RT6_LOOKUP_F_SRCPREF_PUBLIC;
-		if (prefs & IPV6_PREFER_SRC_COA)
-			flags |= RT6_LOOKUP_F_SRCPREF_COA;
-	}
+	else if (sk)
+		flags |= rt6_srcprefs2flags(inet6_sk(sk)->srcprefs);
 
 	return fib6_rule_lookup(net, fl, flags, ip6_pol_route_output);
 }
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 6963a6b..9b6dbba 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1740,8 +1740,11 @@
 			if (!tcp_prequeue(sk, skb))
 				ret = tcp_v6_do_rcv(sk, skb);
 		}
-	} else
-		sk_add_backlog(sk, skb);
+	} else if (unlikely(sk_add_backlog(sk, skb))) {
+		bh_unlock_sock(sk);
+		NET_INC_STATS_BH(net, LINUX_MIB_TCPBACKLOGDROP);
+		goto discard_and_relse;
+	}
 	bh_unlock_sock(sk);
 
 	sock_put(sk);
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 52b8347..3c0c9c7 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -583,16 +583,20 @@
 			bh_lock_sock(sk);
 			if (!sock_owned_by_user(sk))
 				udpv6_queue_rcv_skb(sk, skb1);
-			else
-				sk_add_backlog(sk, skb1);
+			else if (sk_add_backlog(sk, skb1)) {
+				kfree_skb(skb1);
+				bh_unlock_sock(sk);
+				goto drop;
+			}
 			bh_unlock_sock(sk);
-		} else {
-			atomic_inc(&sk->sk_drops);
-			UDP6_INC_STATS_BH(sock_net(sk),
-					UDP_MIB_RCVBUFERRORS, IS_UDPLITE(sk));
-			UDP6_INC_STATS_BH(sock_net(sk),
-					UDP_MIB_INERRORS, IS_UDPLITE(sk));
+			continue;
 		}
+drop:
+		atomic_inc(&sk->sk_drops);
+		UDP6_INC_STATS_BH(sock_net(sk),
+				UDP_MIB_RCVBUFERRORS, IS_UDPLITE(sk));
+		UDP6_INC_STATS_BH(sock_net(sk),
+				UDP_MIB_INERRORS, IS_UDPLITE(sk));
 	}
 }
 /*
@@ -754,8 +758,12 @@
 	bh_lock_sock(sk);
 	if (!sock_owned_by_user(sk))
 		udpv6_queue_rcv_skb(sk, skb);
-	else
-		sk_add_backlog(sk, skb);
+	else if (sk_add_backlog(sk, skb)) {
+		atomic_inc(&sk->sk_drops);
+		bh_unlock_sock(sk);
+		sock_put(sk);
+		goto discard;
+	}
 	bh_unlock_sock(sk);
 	sock_put(sk);
 	return 0;
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index dbdc696..ae18165 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -116,7 +116,8 @@
 	return 0;
 }
 
-static int xfrm6_fill_dst(struct xfrm_dst *xdst, struct net_device *dev)
+static int xfrm6_fill_dst(struct xfrm_dst *xdst, struct net_device *dev,
+			  struct flowi *fl)
 {
 	struct rt6_info *rt = (struct rt6_info*)xdst->route;
 
diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c
index 019c780..86d6985 100644
--- a/net/llc/llc_c_ac.c
+++ b/net/llc/llc_c_ac.c
@@ -1437,7 +1437,7 @@
 			llc_conn_state_process(sk, skb);
 		else {
 			llc_set_backlog_type(skb, LLC_EVENT);
-			sk_add_backlog(sk, skb);
+			__sk_add_backlog(sk, skb);
 		}
 	}
 }
diff --git a/net/llc/llc_conn.c b/net/llc/llc_conn.c
index a8dde9b..a12144d 100644
--- a/net/llc/llc_conn.c
+++ b/net/llc/llc_conn.c
@@ -827,7 +827,8 @@
 	else {
 		dprintk("%s: adding to backlog...\n", __func__);
 		llc_set_backlog_type(skb, LLC_PACKET);
-		sk_add_backlog(sk, skb);
+		if (sk_add_backlog(sk, skb))
+			goto drop_unlock;
 	}
 out:
 	bh_unlock_sock(sk);
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index 9affe2c..b4ddb2f 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -48,20 +48,24 @@
 	ssize_t (*write)(struct ieee80211_sub_if_data *, const char *, int))
 {
 	u8 *buf;
-	ssize_t ret = -ENODEV;
+	ssize_t ret;
 
-	buf = kzalloc(count, GFP_KERNEL);
+	buf = kmalloc(count, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 
+	ret = -EFAULT;
 	if (copy_from_user(buf, userbuf, count))
-		return -EFAULT;
+		goto freebuf;
 
+	ret = -ENODEV;
 	rtnl_lock();
 	if (sdata->dev->reg_state == NETREG_REGISTERED)
 		ret = (*write)(sdata, buf, count);
 	rtnl_unlock();
 
+freebuf:
+	kfree(buf);
 	return ret;
 }
 
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index bc4e20e..1a29c4a 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -744,7 +744,7 @@
 		break;
 	default:
 		/* should not get here, PLINK_BLOCKED is dealt with at the
-		 * beggining of the function
+		 * beginning of the function
 		 */
 		spin_unlock_bh(&sta->lock);
 		break;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 41812a1..be5f723 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -177,7 +177,8 @@
 		sta = sta_info_get(sdata, bssid);
 		if (sta)
 			rate_control_rate_update(local, sband, sta,
-						 IEEE80211_RC_HT_CHANGED);
+						 IEEE80211_RC_HT_CHANGED,
+						 local->oper_channel_type);
 		rcu_read_unlock();
         }
 
@@ -435,10 +436,12 @@
 		if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
 			ieee80211_send_nullfunc(local, sdata, 1);
 
-		if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) {
-			conf->flags |= IEEE80211_CONF_PS;
-			ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
-		}
+		if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
+		    (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS))
+			return;
+
+		conf->flags |= IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
 	}
 }
 
@@ -557,7 +560,8 @@
 	    (!(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)))
 		ieee80211_send_nullfunc(local, sdata, 1);
 
-	if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) ||
+	if (!((local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) &&
+	      (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)) ||
 	    (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
 		ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
 		local->hw.conf.flags |= IEEE80211_CONF_PS;
@@ -1893,8 +1897,20 @@
 
 	mutex_lock(&ifmgd->mtx);
 	if (ifmgd->associated) {
-		mutex_unlock(&ifmgd->mtx);
-		return -EALREADY;
+		if (!req->prev_bssid ||
+		    memcmp(req->prev_bssid, ifmgd->associated->bssid,
+			   ETH_ALEN)) {
+			/*
+			 * We are already associated and the request was not a
+			 * reassociation request from the current BSS, so
+			 * reject it.
+			 */
+			mutex_unlock(&ifmgd->mtx);
+			return -EALREADY;
+		}
+
+		/* Trying to reassociate - clear previous association state */
+		ieee80211_set_disassoc(sdata);
 	}
 	mutex_unlock(&ifmgd->mtx);
 
diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h
index b6108bc..065a9619 100644
--- a/net/mac80211/rate.h
+++ b/net/mac80211/rate.h
@@ -66,7 +66,8 @@
 
 static inline void rate_control_rate_update(struct ieee80211_local *local,
 				    struct ieee80211_supported_band *sband,
-				    struct sta_info *sta, u32 changed)
+				    struct sta_info *sta, u32 changed,
+				    enum nl80211_channel_type oper_chan_type)
 {
 	struct rate_control_ref *ref = local->rate_ctrl;
 	struct ieee80211_sta *ista = &sta->sta;
@@ -74,7 +75,7 @@
 
 	if (ref && ref->ops->rate_update)
 		ref->ops->rate_update(ref->priv, sband, ista,
-				      priv_sta, changed);
+				      priv_sta, changed, oper_chan_type);
 }
 
 static inline void *rate_control_alloc_sta(struct rate_control_ref *ref,
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 211c475..56422d8 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -434,6 +434,7 @@
 	/* check if STA exists already */
 	if (sta_info_get_bss(sdata, sta->sta.addr)) {
 		spin_unlock_irqrestore(&local->sta_lock, flags);
+		mutex_unlock(&local->sta_mtx);
 		rcu_read_lock();
 		err = -EEXIST;
 		goto out_free;
diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index 8dd75d9..c6cd1b8 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -284,7 +284,7 @@
  * tabs, spaces and continuation lines, which are treated as a single whitespace
  * character.
  *
- * Some headers may appear multiple times. A comma seperated list of values is
+ * Some headers may appear multiple times. A comma separated list of values is
  * equivalent to multiple headers.
  */
 static const struct sip_header ct_sip_hdrs[] = {
@@ -421,7 +421,7 @@
 }
 EXPORT_SYMBOL_GPL(ct_sip_get_header);
 
-/* Get next header field in a list of comma seperated values */
+/* Get next header field in a list of comma separated values */
 static int ct_sip_next_header(const struct nf_conn *ct, const char *dptr,
 			      unsigned int dataoff, unsigned int datalen,
 			      enum sip_header_types type,
diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index d952806..9e9c489 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -1,6 +1,6 @@
 /*
  *	xt_hashlimit - Netfilter module to limit the number of packets per time
- *	seperately for each hashbucket (sourceip/sourceport/dstip/dstport)
+ *	separately for each hashbucket (sourceip/sourceport/dstip/dstport)
  *
  *	(C) 2003-2004 by Harald Welte <laforge@netfilter.org>
  *	Copyright © CC Computer Consultants GmbH, 2007 - 2008
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 031a5e6..1612d417 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1688,6 +1688,8 @@
 {
 	switch (i->type) {
 	case PACKET_MR_MULTICAST:
+		if (i->alen != dev->addr_len)
+			return -EINVAL;
 		if (what > 0)
 			return dev_mc_add(dev, i->addr, i->alen, 0);
 		else
@@ -1700,6 +1702,8 @@
 		return dev_set_allmulti(dev, what);
 		break;
 	case PACKET_MR_UNICAST:
+		if (i->alen != dev->addr_len)
+			return -EINVAL;
 		if (what > 0)
 			return dev_unicast_add(dev, i->addr);
 		else
@@ -1734,7 +1738,7 @@
 		goto done;
 
 	err = -EINVAL;
-	if (mreq->mr_alen != dev->addr_len)
+	if (mreq->mr_alen > dev->addr_len)
 		goto done;
 
 	err = -ENOBUFS;
diff --git a/net/rfkill/input.c b/net/rfkill/input.c
index a7295ad..3713d7e 100644
--- a/net/rfkill/input.c
+++ b/net/rfkill/input.c
@@ -212,6 +212,9 @@
 		case KEY_WIMAX:
 			rfkill_schedule_toggle(RFKILL_TYPE_WIMAX);
 			break;
+		case KEY_RFKILL:
+			rfkill_schedule_toggle(RFKILL_TYPE_ALL);
+			break;
 		}
 	} else if (type == EV_SW && code == SW_RFKILL_ALL)
 		rfkill_schedule_evsw_rfkillall(data);
@@ -295,6 +298,11 @@
 		.keybit = { [BIT_WORD(KEY_WIMAX)] = BIT_MASK(KEY_WIMAX) },
 	},
 	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(KEY_RFKILL)] = BIT_MASK(KEY_RFKILL) },
+	},
+	{
 		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT,
 		.evbit = { BIT(EV_SW) },
 		.swbit = { [BIT_WORD(SW_RFKILL_ALL)] = BIT_MASK(SW_RFKILL_ALL) },
diff --git a/net/sctp/input.c b/net/sctp/input.c
index c0c973e..3d74b26 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -75,7 +75,7 @@
 					const union sctp_addr *peer,
 					struct sctp_transport **pt);
 
-static void sctp_add_backlog(struct sock *sk, struct sk_buff *skb);
+static int sctp_add_backlog(struct sock *sk, struct sk_buff *skb);
 
 
 /* Calculate the SCTP checksum of an SCTP packet.  */
@@ -265,8 +265,13 @@
 	}
 
 	if (sock_owned_by_user(sk)) {
+		if (sctp_add_backlog(sk, skb)) {
+			sctp_bh_unlock_sock(sk);
+			sctp_chunk_free(chunk);
+			skb = NULL; /* sctp_chunk_free already freed the skb */
+			goto discard_release;
+		}
 		SCTP_INC_STATS_BH(SCTP_MIB_IN_PKT_BACKLOG);
-		sctp_add_backlog(sk, skb);
 	} else {
 		SCTP_INC_STATS_BH(SCTP_MIB_IN_PKT_SOFTIRQ);
 		sctp_inq_push(&chunk->rcvr->inqueue, chunk);
@@ -336,8 +341,10 @@
 		sctp_bh_lock_sock(sk);
 
 		if (sock_owned_by_user(sk)) {
-			sk_add_backlog(sk, skb);
-			backloged = 1;
+			if (sk_add_backlog(sk, skb))
+				sctp_chunk_free(chunk);
+			else
+				backloged = 1;
 		} else
 			sctp_inq_push(inqueue, chunk);
 
@@ -362,22 +369,27 @@
 	return 0;
 }
 
-static void sctp_add_backlog(struct sock *sk, struct sk_buff *skb)
+static int sctp_add_backlog(struct sock *sk, struct sk_buff *skb)
 {
 	struct sctp_chunk *chunk = SCTP_INPUT_CB(skb)->chunk;
 	struct sctp_ep_common *rcvr = chunk->rcvr;
+	int ret;
 
-	/* Hold the assoc/ep while hanging on the backlog queue.
-	 * This way, we know structures we need will not disappear from us
-	 */
-	if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type)
-		sctp_association_hold(sctp_assoc(rcvr));
-	else if (SCTP_EP_TYPE_SOCKET == rcvr->type)
-		sctp_endpoint_hold(sctp_ep(rcvr));
-	else
-		BUG();
+	ret = sk_add_backlog(sk, skb);
+	if (!ret) {
+		/* Hold the assoc/ep while hanging on the backlog queue.
+		 * This way, we know structures we need will not disappear
+		 * from us
+		 */
+		if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type)
+			sctp_association_hold(sctp_assoc(rcvr));
+		else if (SCTP_EP_TYPE_SOCKET == rcvr->type)
+			sctp_endpoint_hold(sctp_ep(rcvr));
+		else
+			BUG();
+	}
+	return ret;
 
-	sk_add_backlog(sk, skb);
 }
 
 /* Handle icmp frag needed error. */
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 4e4ca65..500886b 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -475,7 +475,7 @@
 	 * used to provide an upper bound to this doubling operation.
 	 *
 	 * Special Case:  the first HB doesn't trigger exponential backoff.
-	 * The first unacknowleged HB triggers it.  We do this with a flag
+	 * The first unacknowledged HB triggers it.  We do this with a flag
 	 * that indicates that we have an outstanding HB.
 	 */
 	if (!is_hb || transport->hb_sent) {
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index f6d1e59..dfc5c12 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -3720,6 +3720,9 @@
 	SCTP_DBG_OBJCNT_INC(sock);
 	percpu_counter_inc(&sctp_sockets_allocated);
 
+	/* Set socket backlog limit. */
+	sk->sk_backlog.limit = sysctl_sctp_rmem[1];
+
 	local_bh_disable();
 	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
 	local_bh_enable();
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 7018eef..f96c2fe 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -160,16 +160,15 @@
 	(void)rpc_ntop(sap, buf, sizeof(buf));
 	xprt->address_strings[RPC_DISPLAY_ADDR] = kstrdup(buf, GFP_KERNEL);
 
-	(void)snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
+	snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
 	xprt->address_strings[RPC_DISPLAY_PORT] = kstrdup(buf, GFP_KERNEL);
 
 	xprt->address_strings[RPC_DISPLAY_PROTO] = "rdma";
 
-	(void)snprintf(buf, sizeof(buf), "%02x%02x%02x%02x",
-				NIPQUAD(sin->sin_addr.s_addr));
+	snprintf(buf, sizeof(buf), "%08x", ntohl(sin->sin_addr.s_addr));
 	xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = kstrdup(buf, GFP_KERNEL);
 
-	(void)snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
+	snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
 	xprt->address_strings[RPC_DISPLAY_HEX_PORT] = kstrdup(buf, GFP_KERNEL);
 
 	/* netid */
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 7124129..75ab08e 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -297,12 +297,11 @@
 	switch (sap->sa_family) {
 	case AF_INET:
 		sin = xs_addr_in(xprt);
-		(void)snprintf(buf, sizeof(buf), "%02x%02x%02x%02x",
-					NIPQUAD(sin->sin_addr.s_addr));
+		snprintf(buf, sizeof(buf), "%08x", ntohl(sin->sin_addr.s_addr));
 		break;
 	case AF_INET6:
 		sin6 = xs_addr_in6(xprt);
-		(void)snprintf(buf, sizeof(buf), "%pi6", &sin6->sin6_addr);
+		snprintf(buf, sizeof(buf), "%pi6", &sin6->sin6_addr);
 		break;
 	default:
 		BUG();
@@ -315,10 +314,10 @@
 	struct sockaddr *sap = xs_addr(xprt);
 	char buf[128];
 
-	(void)snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
+	snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
 	xprt->address_strings[RPC_DISPLAY_PORT] = kstrdup(buf, GFP_KERNEL);
 
-	(void)snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
+	snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
 	xprt->address_strings[RPC_DISPLAY_HEX_PORT] = kstrdup(buf, GFP_KERNEL);
 }
 
diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index 327011f..7809137 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -45,10 +45,10 @@
 
 #define MAX_ADDR_STR 32
 
-static struct media *media_list = NULL;
+static struct media media_list[MAX_MEDIA];
 static u32 media_count = 0;
 
-struct bearer *tipc_bearers = NULL;
+struct bearer tipc_bearers[MAX_BEARERS];
 
 /**
  * media_name_valid - validate media name
@@ -108,9 +108,11 @@
 	int res = -EINVAL;
 
 	write_lock_bh(&tipc_net_lock);
-	if (!media_list)
-		goto exit;
 
+	if (tipc_mode != TIPC_NET_MODE) {
+		warn("Media <%s> rejected, not in networked mode yet\n", name);
+		goto exit;
+	}
 	if (!media_name_valid(name)) {
 		warn("Media <%s> rejected, illegal name\n", name);
 		goto exit;
@@ -660,33 +662,10 @@
 
 
 
-int tipc_bearer_init(void)
-{
-	int res;
-
-	write_lock_bh(&tipc_net_lock);
-	tipc_bearers = kcalloc(MAX_BEARERS, sizeof(struct bearer), GFP_ATOMIC);
-	media_list = kcalloc(MAX_MEDIA, sizeof(struct media), GFP_ATOMIC);
-	if (tipc_bearers && media_list) {
-		res = 0;
-	} else {
-		kfree(tipc_bearers);
-		kfree(media_list);
-		tipc_bearers = NULL;
-		media_list = NULL;
-		res = -ENOMEM;
-	}
-	write_unlock_bh(&tipc_net_lock);
-	return res;
-}
-
 void tipc_bearer_stop(void)
 {
 	u32 i;
 
-	if (!tipc_bearers)
-		return;
-
 	for (i = 0; i < MAX_BEARERS; i++) {
 		if (tipc_bearers[i].active)
 			tipc_bearers[i].publ.blocked = 1;
@@ -695,10 +674,6 @@
 		if (tipc_bearers[i].active)
 			bearer_disable(tipc_bearers[i].publ.name);
 	}
-	kfree(tipc_bearers);
-	kfree(media_list);
-	tipc_bearers = NULL;
-	media_list = NULL;
 	media_count = 0;
 }
 
diff --git a/net/tipc/bearer.h b/net/tipc/bearer.h
index ca57348..000228e 100644
--- a/net/tipc/bearer.h
+++ b/net/tipc/bearer.h
@@ -114,7 +114,7 @@
 
 struct link;
 
-extern struct bearer *tipc_bearers;
+extern struct bearer tipc_bearers[];
 
 void tipc_media_addr_printf(struct print_buf *pb, struct tipc_media_addr *a);
 struct sk_buff *tipc_media_get_names(void);
diff --git a/net/tipc/link.c b/net/tipc/link.c
index 6f50f64..1a7e466 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -1882,6 +1882,15 @@
 			     (msg_destnode(msg) != tipc_own_addr)))
 			goto cont;
 
+		/* Discard non-routeable messages destined for another node */
+
+		if (unlikely(!msg_isdata(msg) &&
+			     (msg_destnode(msg) != tipc_own_addr))) {
+			if ((msg_user(msg) != CONN_MANAGER) &&
+			    (msg_user(msg) != MSG_FRAGMENTER))
+				goto cont;
+		}
+
 		/* Locate unicast link endpoint that should handle message */
 
 		n_ptr = tipc_node_find(msg_prevnode(msg));
diff --git a/net/tipc/net.c b/net/tipc/net.c
index 7906608..f25b1cd 100644
--- a/net/tipc/net.c
+++ b/net/tipc/net.c
@@ -116,7 +116,8 @@
 */
 
 DEFINE_RWLOCK(tipc_net_lock);
-struct network tipc_net = { NULL };
+struct _zone *tipc_zones[256] = { NULL, };
+struct network tipc_net = { tipc_zones };
 
 struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref)
 {
@@ -158,28 +159,12 @@
 	}
 }
 
-static int net_init(void)
-{
-	memset(&tipc_net, 0, sizeof(tipc_net));
-	tipc_net.zones = kcalloc(tipc_max_zones + 1, sizeof(struct _zone *), GFP_ATOMIC);
-	if (!tipc_net.zones) {
-		return -ENOMEM;
-	}
-	return 0;
-}
-
 static void net_stop(void)
 {
 	u32 z_num;
 
-	if (!tipc_net.zones)
-		return;
-
-	for (z_num = 1; z_num <= tipc_max_zones; z_num++) {
+	for (z_num = 1; z_num <= tipc_max_zones; z_num++)
 		tipc_zone_delete(tipc_net.zones[z_num]);
-	}
-	kfree(tipc_net.zones);
-	tipc_net.zones = NULL;
 }
 
 static void net_route_named_msg(struct sk_buff *buf)
@@ -282,9 +267,7 @@
 	tipc_named_reinit();
 	tipc_port_reinit();
 
-	if ((res = tipc_bearer_init()) ||
-	    (res = net_init()) ||
-	    (res = tipc_cltr_init()) ||
+	if ((res = tipc_cltr_init()) ||
 	    (res = tipc_bclink_init())) {
 		return res;
 	}
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 1ea64f0..4b235fc 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -1322,8 +1322,10 @@
 	if (!sock_owned_by_user(sk)) {
 		res = filter_rcv(sk, buf);
 	} else {
-		sk_add_backlog(sk, buf);
-		res = TIPC_OK;
+		if (sk_add_backlog(sk, buf))
+			res = TIPC_ERR_OVERLOAD;
+		else
+			res = TIPC_OK;
 	}
 	bh_unlock_sock(sk);
 
diff --git a/net/tipc/subscr.c b/net/tipc/subscr.c
index ac91f0d..ff123e5 100644
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -76,19 +76,6 @@
 static struct top_srv topsrv = { 0 };
 
 /**
- * htohl - convert value to endianness used by destination
- * @in: value to convert
- * @swap: non-zero if endianness must be reversed
- *
- * Returns converted value
- */
-
-static u32 htohl(u32 in, int swap)
-{
-	return swap ? swab32(in) : in;
-}
-
-/**
  * subscr_send_event - send a message containing a tipc_event to the subscriber
  *
  * Note: Must not hold subscriber's server port lock, since tipc_send() will
@@ -107,11 +94,11 @@
 	msg_sect.iov_base = (void *)&sub->evt;
 	msg_sect.iov_len = sizeof(struct tipc_event);
 
-	sub->evt.event = htohl(event, sub->swap);
-	sub->evt.found_lower = htohl(found_lower, sub->swap);
-	sub->evt.found_upper = htohl(found_upper, sub->swap);
-	sub->evt.port.ref = htohl(port_ref, sub->swap);
-	sub->evt.port.node = htohl(node, sub->swap);
+	sub->evt.event = htonl(event);
+	sub->evt.found_lower = htonl(found_lower);
+	sub->evt.found_upper = htonl(found_upper);
+	sub->evt.port.ref = htonl(port_ref);
+	sub->evt.port.node = htonl(node);
 	tipc_send(sub->server_ref, 1, &msg_sect);
 }
 
@@ -287,16 +274,23 @@
 {
 	struct subscription *sub;
 	struct subscription *sub_temp;
+	__u32 type, lower, upper;
 	int found = 0;
 
 	/* Find first matching subscription, exit if not found */
 
+	type = ntohl(s->seq.type);
+	lower = ntohl(s->seq.lower);
+	upper = ntohl(s->seq.upper);
+
 	list_for_each_entry_safe(sub, sub_temp, &subscriber->subscription_list,
 				 subscription_list) {
-		if (!memcmp(s, &sub->evt.s, sizeof(struct tipc_subscr))) {
-			found = 1;
-			break;
-		}
+			if ((type == sub->seq.type) &&
+			    (lower == sub->seq.lower) &&
+			    (upper == sub->seq.upper)) {
+				found = 1;
+				break;
+			}
 	}
 	if (!found)
 		return;
@@ -325,16 +319,10 @@
 					     struct subscriber *subscriber)
 {
 	struct subscription *sub;
-	int swap;
-
-	/* Determine subscriber's endianness */
-
-	swap = !(s->filter & (TIPC_SUB_PORTS | TIPC_SUB_SERVICE));
 
 	/* Detect & process a subscription cancellation request */
 
-	if (s->filter & htohl(TIPC_SUB_CANCEL, swap)) {
-		s->filter &= ~htohl(TIPC_SUB_CANCEL, swap);
+	if (ntohl(s->filter) & TIPC_SUB_CANCEL) {
 		subscr_cancel(s, subscriber);
 		return NULL;
 	}
@@ -359,11 +347,11 @@
 
 	/* Initialize subscription object */
 
-	sub->seq.type = htohl(s->seq.type, swap);
-	sub->seq.lower = htohl(s->seq.lower, swap);
-	sub->seq.upper = htohl(s->seq.upper, swap);
-	sub->timeout = htohl(s->timeout, swap);
-	sub->filter = htohl(s->filter, swap);
+	sub->seq.type = ntohl(s->seq.type);
+	sub->seq.lower = ntohl(s->seq.lower);
+	sub->seq.upper = ntohl(s->seq.upper);
+	sub->timeout = ntohl(s->timeout);
+	sub->filter = ntohl(s->filter);
 	if ((!(sub->filter & TIPC_SUB_PORTS) ==
 	     !(sub->filter & TIPC_SUB_SERVICE)) ||
 	    (sub->seq.lower > sub->seq.upper)) {
@@ -376,7 +364,6 @@
 	INIT_LIST_HEAD(&sub->nameseq_list);
 	list_add(&sub->subscription_list, &subscriber->subscription_list);
 	sub->server_ref = subscriber->port_ref;
-	sub->swap = swap;
 	memcpy(&sub->evt.s, s, sizeof(struct tipc_subscr));
 	atomic_inc(&topsrv.subscription_count);
 	if (sub->timeout != TIPC_WAIT_FOREVER) {
diff --git a/net/tipc/subscr.h b/net/tipc/subscr.h
index 45d89bf..c20f496 100644
--- a/net/tipc/subscr.h
+++ b/net/tipc/subscr.h
@@ -53,7 +53,6 @@
  * @nameseq_list: adjacent subscriptions in name sequence's subscription list
  * @subscription_list: adjacent subscriptions in subscriber's subscription list
  * @server_ref: object reference of server port associated with subscription
- * @swap: indicates if subscriber uses opposite endianness in its messages
  * @evt: template for events generated by subscription
  */
 
@@ -66,7 +65,6 @@
 	struct list_head nameseq_list;
 	struct list_head subscription_list;
 	u32 server_ref;
-	int swap;
 	struct tipc_event evt;
 };
 
diff --git a/net/x25/x25_dev.c b/net/x25/x25_dev.c
index 3e1efe5..52e3042 100644
--- a/net/x25/x25_dev.c
+++ b/net/x25/x25_dev.c
@@ -53,7 +53,7 @@
 		if (!sock_owned_by_user(sk)) {
 			queued = x25_process_rx_frame(sk, skb);
 		} else {
-			sk_add_backlog(sk, skb);
+			queued = !sk_add_backlog(sk, skb);
 		}
 		bh_unlock_sock(sk);
 		sock_put(sk);
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 34a5ef8..843e066 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1372,7 +1372,8 @@
 	return err;
 }
 
-static inline int xfrm_fill_dst(struct xfrm_dst *xdst, struct net_device *dev)
+static inline int xfrm_fill_dst(struct xfrm_dst *xdst, struct net_device *dev,
+				struct flowi *fl)
 {
 	struct xfrm_policy_afinfo *afinfo =
 		xfrm_policy_get_afinfo(xdst->u.dst.ops->family);
@@ -1381,7 +1382,7 @@
 	if (!afinfo)
 		return -EINVAL;
 
-	err = afinfo->fill_dst(xdst, dev);
+	err = afinfo->fill_dst(xdst, dev, fl);
 
 	xfrm_policy_put_afinfo(afinfo);
 
@@ -1486,7 +1487,7 @@
 	for (dst_prev = dst0; dst_prev != dst; dst_prev = dst_prev->child) {
 		struct xfrm_dst *xdst = (struct xfrm_dst *)dst_prev;
 
-		err = xfrm_fill_dst(xdst, dev);
+		err = xfrm_fill_dst(xdst, dev, fl);
 		if (err)
 			goto free_dst;
 
diff --git a/samples/hw_breakpoint/data_breakpoint.c b/samples/hw_breakpoint/data_breakpoint.c
index c69cbe9..bd0f337 100644
--- a/samples/hw_breakpoint/data_breakpoint.c
+++ b/samples/hw_breakpoint/data_breakpoint.c
@@ -34,7 +34,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 
-struct perf_event **sample_hbp;
+struct perf_event * __percpu *sample_hbp;
 
 static char ksym_name[KSYM_NAME_LEN] = "pid_max";
 module_param_string(ksym, ksym_name, KSYM_NAME_LEN, S_IRUGO);
@@ -61,8 +61,8 @@
 	attr.bp_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
 
 	sample_hbp = register_wide_hw_breakpoint(&attr, sample_hbp_handler);
-	if (IS_ERR(sample_hbp)) {
-		ret = PTR_ERR(sample_hbp);
+	if (IS_ERR((void __force *)sample_hbp)) {
+		ret = PTR_ERR((void __force *)sample_hbp);
 		goto fail;
 	}
 
diff --git a/samples/kobject/kobject-example.c b/samples/kobject/kobject-example.c
index 8d9b55a..86ea0c3 100644
--- a/samples/kobject/kobject-example.c
+++ b/samples/kobject/kobject-example.c
@@ -44,7 +44,7 @@
 	__ATTR(foo, 0666, foo_show, foo_store);
 
 /*
- * More complex function where we determine which varible is being accessed by
+ * More complex function where we determine which variable is being accessed by
  * looking at the attribute for the "baz" and "bar" files.
  */
 static ssize_t b_show(struct kobject *kobj, struct kobj_attribute *attr,
@@ -79,7 +79,7 @@
 
 
 /*
- * Create a group of attributes so that we can create and destory them all
+ * Create a group of attributes so that we can create and destroy them all
  * at once.
  */
 static struct attribute *attrs[] = {
diff --git a/samples/kobject/kset-example.c b/samples/kobject/kset-example.c
index 45b7d56..3b126d1 100644
--- a/samples/kobject/kset-example.c
+++ b/samples/kobject/kset-example.c
@@ -87,7 +87,7 @@
 }
 
 /* Our custom sysfs_ops that we will associate with our ktype later on */
-static struct sysfs_ops foo_sysfs_ops = {
+static const struct sysfs_ops foo_sysfs_ops = {
 	.show = foo_attr_show,
 	.store = foo_attr_store,
 };
@@ -127,7 +127,7 @@
 	__ATTR(foo, 0666, foo_show, foo_store);
 
 /*
- * More complex function where we determine which varible is being accessed by
+ * More complex function where we determine which variable is being accessed by
  * looking at the attribute for the "baz" and "bar" files.
  */
 static ssize_t b_show(struct foo_obj *foo_obj, struct foo_attribute *attr,
@@ -161,7 +161,7 @@
 	__ATTR(bar, 0666, b_show, b_store);
 
 /*
- * Create a group of attributes so that we can create and destory them all
+ * Create a group of attributes so that we can create and destroy them all
  * at once.
  */
 static struct attribute *foo_default_attrs[] = {
diff --git a/scripts/gfp-translate b/scripts/gfp-translate
index 073cb6d..d81b968 100644
--- a/scripts/gfp-translate
+++ b/scripts/gfp-translate
@@ -19,7 +19,7 @@
 	exit 0
 }
 
-# Parse command-line arguements
+# Parse command-line arguments
 while [ $# -gt 0 ]; do
 	case $1 in
 		--source)
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 208ad3b..c7865c3 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -2103,7 +2103,7 @@
 		$section = $newsection;
 	    } elsif (/$doc_end/) {
 
-		if ($contents ne "") {
+		if (($contents ne "") && ($contents ne "\n")) {
 		    dump_section($file, $section, xml_escape($contents));
 		    $section = $section_default;
 		    $contents = "";
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index db0fd9f..989fef8 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -337,7 +337,7 @@
  * Look up an AVC entry that is valid for the
  * (@ssid, @tsid), interpreting the permissions
  * based on @tclass.  If a valid AVC entry exists,
- * then this function return the avc_node.
+ * then this function returns the avc_node.
  * Otherwise, this function returns NULL.
  */
 static struct avc_node *avc_lookup(u32 ssid, u32 tsid, u16 tclass)
@@ -523,7 +523,7 @@
  * @perms: permissions
  *
  * Register a callback function for events in the set @events
- * related to the SID pair (@ssid, @tsid) and
+ * related to the SID pair (@ssid, @tsid) 
  * and the permissions @perms, interpreting
  * @perms based on @tclass.  Returns %0 on success or
  * -%ENOMEM if insufficient memory exists to add the callback.
@@ -568,7 +568,7 @@
  *
  * if a valid AVC entry doesn't exist,this function returns -ENOENT.
  * if kmalloc() called internal returns NULL, this function returns -ENOMEM.
- * otherwise, this function update the AVC entry. The original AVC-entry object
+ * otherwise, this function updates the AVC entry. The original AVC-entry object
  * will release later by RCU.
  */
 static int avc_update_node(u32 event, u32 perms, u32 ssid, u32 tsid, u16 tclass,
diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index ff51f10..ef89947 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -886,6 +886,7 @@
 	ptr = kmalloc(sizeof(*ptr), GFP_KERNEL);
 	if (!tomoyo_memory_ok(ptr)) {
 		kfree(ptr);
+		ptr = NULL;
 		goto ok;
 	}
 	for (i = 0; i < TOMOYO_MAX_CONTROL_INDEX; i++)
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 6fdca97..88eec38 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -22,7 +22,6 @@
 
 #include <asm/irq.h>
 #include <mach/regs-ac97.h>
-#include <mach/pxa2xx-gpio.h>
 #include <mach/audio.h>
 
 static DEFINE_MUTEX(car_mutex);
@@ -32,6 +31,8 @@
 static struct clk *ac97conf_clk;
 static int reset_gpio;
 
+extern void pxa27x_assert_ac97reset(int reset_gpio, int on);
+
 /*
  * Beware PXA27x bugs:
  *
@@ -42,45 +43,6 @@
  * 1 jiffy timeout if interrupt never comes).
  */
 
-enum {
-	RESETGPIO_FORCE_HIGH,
-	RESETGPIO_FORCE_LOW,
-	RESETGPIO_NORMAL_ALTFUNC
-};
-
-/**
- * set_resetgpio_mode - computes and sets the AC97_RESET gpio mode on PXA
- * @mode: chosen action
- *
- * As the PXA27x CPUs suffer from a AC97 bug, a manual control of the reset line
- * must be done to insure proper work of AC97 reset line.  This function
- * computes the correct gpio_mode for further use by reset functions, and
- * applied the change through pxa_gpio_mode.
- */
-static void set_resetgpio_mode(int resetgpio_action)
-{
-	int mode = 0;
-
-	if (reset_gpio)
-		switch (resetgpio_action) {
-		case RESETGPIO_NORMAL_ALTFUNC:
-			if (reset_gpio == 113)
-				mode = 113 | GPIO_ALT_FN_2_OUT;
-			if (reset_gpio == 95)
-				mode = 95 | GPIO_ALT_FN_1_OUT;
-			break;
-		case RESETGPIO_FORCE_LOW:
-			mode = reset_gpio | GPIO_OUT | GPIO_DFLT_LOW;
-			break;
-		case RESETGPIO_FORCE_HIGH:
-			mode = reset_gpio | GPIO_OUT | GPIO_DFLT_HIGH;
-			break;
-		};
-
-	if (mode)
-		pxa_gpio_mode(mode);
-}
-
 unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
 {
 	unsigned short val = -1;
@@ -174,12 +136,11 @@
 {
 	gsr_bits = 0;
 
-	/* warm reset broken on Bulverde,
-	   so manually keep AC97 reset high */
-	set_resetgpio_mode(RESETGPIO_FORCE_HIGH);
+	/* warm reset broken on Bulverde, so manually keep AC97 reset high */
+	pxa27x_assert_ac97reset(reset_gpio, 1);
 	udelay(10);
 	GCR |= GCR_WARM_RST;
-	set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
+	pxa27x_assert_ac97reset(reset_gpio, 0);
 	udelay(500);
 }
 
@@ -345,16 +306,6 @@
 
 int pxa2xx_ac97_hw_resume(void)
 {
-	if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
-		pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
-		pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
-		pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
-		pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
-	}
-	if (cpu_is_pxa27x()) {
-		/* Use GPIO 113 or 95 as AC97 Reset on Bulverde */
-		set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
-	}
 	clk_enable(ac97_clk);
 	return 0;
 }
@@ -386,16 +337,9 @@
 			reset_gpio = 113;
 	}
 
-	if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
-		pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
-		pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
-		pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
-		pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
-	}
-
 	if (cpu_is_pxa27x()) {
 		/* Use GPIO 113 as AC97 Reset on Bulverde */
-		set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
+		pxa27x_assert_ac97reset(reset_gpio, 0);
 		ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
 		if (IS_ERR(ac97conf_clk)) {
 			ret = PTR_ERR(ac97conf_clk);
diff --git a/sound/core/timer.c b/sound/core/timer.c
index 8f8b17a..7394365 100644
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -393,7 +393,7 @@
 	    event == SNDRV_TIMER_EVENT_CONTINUE)
 		resolution = snd_timer_resolution(ti);
 	if (ti->ccallback)
-		ti->ccallback(ti, SNDRV_TIMER_EVENT_START, &tstamp, resolution);
+		ti->ccallback(ti, event, &tstamp, resolution);
 	if (ti->flags & SNDRV_TIMER_IFLG_SLAVE)
 		return;
 	timer = ti->timer;
diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index b865e45..5913717 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -1558,7 +1558,7 @@
 
 	err = pnp_activate_dev(devmc);
 	if (err < 0) {
-		snd_printk(KERN_ERR "OPL syntg pnp configure failure: %d\n",
+		snd_printk(KERN_ERR "MC pnp configure failure: %d\n",
 				    err);
 		return err;
 	}
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index a4af53b..4d2d040 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -144,12 +144,8 @@
 
 	spinlock_t lock;
 
+	long wss_base;
 	int irq;
-
-#ifdef CONFIG_PNP
-	struct pnp_dev *dev;
-	struct pnp_dev *devmpu;
-#endif	/* CONFIG_PNP */
 };
 
 static int snd_opti9xx_pnp_is_probed;
@@ -159,12 +155,17 @@
 static struct pnp_card_device_id snd_opti9xx_pnpids[] = {
 #ifndef OPTi93X
 	/* OPTi 82C924 */
-	{ .id = "OPT0924", .devs = { { "OPT0000" }, { "OPT0002" } }, .driver_data = 0x0924 },
+	{ .id = "OPT0924",
+	  .devs = { { "OPT0000" }, { "OPT0002" }, { "OPT0005" } },
+	  .driver_data = 0x0924 },
 	/* OPTi 82C925 */
-	{ .id = "OPT0925", .devs = { { "OPT9250" }, { "OPT0002" } }, .driver_data = 0x0925 },
+	{ .id = "OPT0925",
+	  .devs = { { "OPT9250" }, { "OPT0002" }, { "OPT0005" } },
+	  .driver_data = 0x0925 },
 #else
 	/* OPTi 82C931/3 */
-	{ .id = "OPT0931", .devs = { { "OPT9310" }, { "OPT0002" } }, .driver_data = 0x0931 },
+	{ .id = "OPT0931", .devs = { { "OPT9310" }, { "OPT0002" } },
+	  .driver_data = 0x0931 },
 #endif	/* OPTi93X */
 	{ .id = "" }
 };
@@ -207,24 +208,35 @@
 	chip->hardware = hardware;
 	strcpy(chip->name, snd_opti9xx_names[hardware]);
 
-	chip->mc_base_size = opti9xx_mc_size[hardware];  
-
 	spin_lock_init(&chip->lock);
 
 	chip->irq = -1;
 
+#ifndef OPTi93X
+#ifdef CONFIG_PNP
+	if (isapnp && chip->mc_base)
+		/* PnP resource gives the least 10 bits */
+		chip->mc_base |= 0xc00;
+	else
+#endif	/* CONFIG_PNP */
+	{
+		chip->mc_base = 0xf8c;
+		chip->mc_base_size = opti9xx_mc_size[hardware];
+	}
+#else
+		chip->mc_base_size = opti9xx_mc_size[hardware];
+#endif
+
 	switch (hardware) {
 #ifndef OPTi93X
 	case OPTi9XX_HW_82C928:
 	case OPTi9XX_HW_82C929:
-		chip->mc_base = 0xf8c;
 		chip->password = (hardware == OPTi9XX_HW_82C928) ? 0xe2 : 0xe3;
 		chip->pwd_reg = 3;
 		break;
 
 	case OPTi9XX_HW_82C924:
 	case OPTi9XX_HW_82C925:
-		chip->mc_base = 0xf8c;
 		chip->password = 0xe5;
 		chip->pwd_reg = 3;
 		break;
@@ -292,7 +304,7 @@
 	spin_unlock_irqrestore(&chip->lock, flags);
 	return retval;
 }
-	
+
 static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg,
 			      unsigned char value)
 {
@@ -341,7 +353,7 @@
 
 
 static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
-					   long wss_base,
+					   long port,
 					   int irq, int dma1, int dma2,
 					   long mpu_port, int mpu_irq)
 {
@@ -354,16 +366,23 @@
 	switch (chip->hardware) {
 #ifndef OPTi93X
 	case OPTi9XX_HW_82C924:
+		/* opti 929 mode (?), OPL3 clock output, audio enable */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(4), 0xf0, 0xfc);
+		/* enable wave audio */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(6), 0x02, 0x02);
 
 	case OPTi9XX_HW_82C925:
+		/* enable WSS mode */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), 0x80, 0x80);
+		/* OPL3 FM synthesis */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2), 0x00, 0x20);
+		/* disable Sound Blaster IRQ and DMA */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
 #ifdef CS4231
+		/* cs4231/4248 fix enabled */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x02, 0x02);
 #else
+		/* cs4231/4248 fix disabled */
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x00, 0x02);
 #endif	/* CS4231 */
 		break;
@@ -411,21 +430,26 @@
 		return -EINVAL;
 	}
 
-	switch (wss_base) {
-	case 0x530:
+	/* PnP resource says it decodes only 10 bits of address */
+	switch (port & 0x3ff) {
+	case 0x130:
+		chip->wss_base = 0x530;
 		wss_base_bits = 0x00;
 		break;
-	case 0x604:
+	case 0x204:
+		chip->wss_base = 0x604;
 		wss_base_bits = 0x03;
 		break;
-	case 0xe80:
+	case 0x280:
+		chip->wss_base = 0xe80;
 		wss_base_bits = 0x01;
 		break;
-	case 0xf40:
+	case 0x340:
+		chip->wss_base = 0xf40;
 		wss_base_bits = 0x02;
 		break;
 	default:
-		snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", wss_base);
+		snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", port);
 		goto __skip_base;
 	}
 	snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30);
@@ -487,7 +511,7 @@
 #endif	/* CS4231 || OPTi93X */
 
 #ifndef OPTi93X
-	 outb(irq_bits << 3 | dma_bits, wss_base);
+	 outb(irq_bits << 3 | dma_bits, chip->wss_base);
 #else /* OPTi93X */
 	snd_opti9xx_write(chip, OPTi9XX_MC_REG(3), (irq_bits << 3 | dma_bits));
 #endif /* OPTi93X */
@@ -729,15 +753,15 @@
 {
 	struct pnp_dev *pdev;
 	int err;
+	struct pnp_dev *devmpu;
+#ifndef OPTi93X
+	struct pnp_dev *devmc;
+#endif
 
-	chip->dev = pnp_request_card_device(card, pid->devs[0].id, NULL);
-	if (chip->dev == NULL)
+	pdev = pnp_request_card_device(card, pid->devs[0].id, NULL);
+	if (pdev == NULL)
 		return -EBUSY;
 
-	chip->devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
-
-	pdev = chip->dev;
-
 	err = pnp_activate_dev(pdev);
 	if (err < 0) {
 		snd_printk(KERN_ERR "AUDIO pnp configure failure: %d\n", err);
@@ -750,9 +774,24 @@
 	chip->mc_indir_index = pnp_port_start(pdev, 3) + 2;
 	chip->mc_indir_size = pnp_port_len(pdev, 3) - 2;
 #else
-	if (pid->driver_data != 0x0924)
-		port = pnp_port_start(pdev, 1);
+	devmc = pnp_request_card_device(card, pid->devs[2].id, NULL);
+	if (devmc == NULL)
+		return -EBUSY;
+
+	err = pnp_activate_dev(devmc);
+	if (err < 0) {
+		snd_printk(KERN_ERR "MC pnp configure failure: %d\n", err);
+		return err;
+	}
+
+	port = pnp_port_start(pdev, 1);
 	fm_port = pnp_port_start(pdev, 2) + 8;
+	/*
+	 * The MC(0) is never accessed and card does not
+	 * include it in the PnP resource range. OPTI93x include it.
+	 */
+	chip->mc_base = pnp_port_start(devmc, 0) - 1;
+	chip->mc_base_size = pnp_port_len(devmc, 0) + 1;
 #endif	/* OPTi93X */
 	irq = pnp_irq(pdev, 0);
 	dma1 = pnp_dma(pdev, 0);
@@ -760,16 +799,16 @@
 	dma2 = pnp_dma(pdev, 1);
 #endif	/* CS4231 || OPTi93X */
 
-	pdev = chip->devmpu;
-	if (pdev && mpu_port > 0) {
-		err = pnp_activate_dev(pdev);
+	devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
+
+	if (devmpu && mpu_port > 0) {
+		err = pnp_activate_dev(devmpu);
 		if (err < 0) {
-			snd_printk(KERN_ERR "AUDIO pnp configure failure\n");
+			snd_printk(KERN_ERR "MPU401 pnp configure failure\n");
 			mpu_port = -1;
-			chip->devmpu = NULL;
 		} else {
-			mpu_port = pnp_port_start(pdev, 0);
-			mpu_irq = pnp_irq(pdev, 0);
+			mpu_port = pnp_port_start(devmpu, 0);
+			mpu_irq = pnp_irq(devmpu, 0);
 		}
 	}
 	return pid->driver_data;
@@ -824,7 +863,7 @@
 	if (error)
 		return error;
 
-	error = snd_wss_create(card, port + 4, -1, irq, dma1, xdma2,
+	error = snd_wss_create(card, chip->wss_base + 4, -1, irq, dma1, xdma2,
 #ifdef OPTi93X
 			       WSS_HW_OPTI93X, WSS_HWSHARE_IRQ,
 #else
@@ -865,10 +904,11 @@
 	sprintf(card->shortname, "OPTi %s", card->driver);
 #if defined(CS4231) || defined(OPTi93X)
 	sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d",
-		card->shortname, pcm->name, port + 4, irq, dma1, xdma2);
+		card->shortname, pcm->name,
+		chip->wss_base + 4, irq, dma1, xdma2);
 #else
 	sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d",
-		card->shortname, pcm->name, port + 4, irq, dma1);
+		card->shortname, pcm->name, chip->wss_base + 4, irq, dma1);
 #endif	/* CS4231 || OPTi93X */
 
 	if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT)
@@ -1062,9 +1102,6 @@
 		snd_card_free(card);
 		return error;
 	}
-	if (hw <= OPTi9XX_HW_82C930)
-		chip->mc_base -= 0x80;
-
 	error = snd_opti9xx_read_check(chip);
 	if (error) {
 		snd_printk(KERN_ERR "OPTI chip not found\n");
diff --git a/sound/isa/sb/jazz16.c b/sound/isa/sb/jazz16.c
index 8d21a3f..8ccbcdd 100644
--- a/sound/isa/sb/jazz16.c
+++ b/sound/isa/sb/jazz16.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 #include <asm/dma.h>
 #include <linux/isa.h>
 #include <sound/core.h>
diff --git a/sound/oss/coproc.h b/sound/oss/coproc.h
index 7306346..7bec21b 100644
--- a/sound/oss/coproc.h
+++ b/sound/oss/coproc.h
@@ -4,7 +4,7 @@
  */
 
 /*
- * Coprocessor access types 
+ * Coprocessor access types
  */
 #define COPR_CUSTOM		0x0001	/* Custom applications */
 #define COPR_MIDI		0x0002	/* MIDI (MPU-401) emulation */
diff --git a/sound/oss/v_midi.h b/sound/oss/v_midi.h
index 1b86cb4..08e2185 100644
--- a/sound/oss/v_midi.h
+++ b/sound/oss/v_midi.h
@@ -2,9 +2,9 @@
 	   int dev;
 
 	/* State variables */
- 	   int opened;
+	   int opened;
 	   spinlock_t lock;
-	
+
 	/* MIDI fields */
 	   int my_mididev;
 	   int pair_mididev;
@@ -12,4 +12,3 @@
 	   int intr_active;
 	   void (*midi_input_intr) (int dev, unsigned char data);
 	} vmidi_devc;
-
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index 556cff9..567348b 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -157,7 +157,7 @@
 
 config SND_HDA_ELD
 	def_bool y
-	depends on SND_HDA_CODEC_INTELHDMI
+	depends on SND_HDA_CODEC_INTELHDMI || SND_HDA_CODEC_NVHDMI
 
 config SND_HDA_CODEC_CIRRUS
 	bool "Build Cirrus Logic codec support"
diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
index 315a1c4..24bc195 100644
--- a/sound/pci/hda/Makefile
+++ b/sound/pci/hda/Makefile
@@ -3,7 +3,7 @@
 snd-hda-codec-y := hda_codec.o
 snd-hda-codec-$(CONFIG_SND_HDA_GENERIC) += hda_generic.o
 snd-hda-codec-$(CONFIG_PROC_FS) += hda_proc.o
-# snd-hda-codec-$(CONFIG_SND_HDA_ELD) += hda_eld.o
+snd-hda-codec-$(CONFIG_SND_HDA_ELD) += hda_eld.o
 snd-hda-codec-$(CONFIG_SND_HDA_HWDEP) += hda_hwdep.o
 snd-hda-codec-$(CONFIG_SND_HDA_INPUT_BEEP) += hda_beep.o
 
@@ -18,7 +18,7 @@
 snd-hda-codec-conexant-objs :=	patch_conexant.o
 snd-hda-codec-via-objs :=	patch_via.o
 snd-hda-codec-nvhdmi-objs :=	patch_nvhdmi.o
-snd-hda-codec-intelhdmi-objs :=	patch_intelhdmi.o hda_eld.o
+snd-hda-codec-intelhdmi-objs :=	patch_intelhdmi.o
 
 # common driver
 obj-$(CONFIG_SND_HDA_INTEL) := snd-hda-codec.o
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 76d3c4c..5bd7cf4 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -978,8 +978,9 @@
  *
  * Returns 0 if successful, or a negative error code.
  */
-int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
-				    struct hda_codec **codecp)
+int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus,
+				unsigned int codec_addr,
+				struct hda_codec **codecp)
 {
 	struct hda_codec *codec;
 	char component[31];
@@ -1186,7 +1187,7 @@
  */
 
 /* FIXME: more better hash key? */
-#define HDA_HASH_KEY(nid,dir,idx) (u32)((nid) + ((idx) << 16) + ((dir) << 24))
+#define HDA_HASH_KEY(nid, dir, idx) (u32)((nid) + ((idx) << 16) + ((dir) << 24))
 #define HDA_HASH_PINCAP_KEY(nid) (u32)((nid) + (0x02 << 24))
 #define HDA_HASH_PARPCM_KEY(nid) (u32)((nid) + (0x03 << 24))
 #define HDA_HASH_PARSTR_KEY(nid) (u32)((nid) + (0x04 << 24))
@@ -1356,7 +1357,8 @@
 	if (!codec->no_trigger_sense) {
 		pincap = snd_hda_query_pin_caps(codec, nid);
 		if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
-			snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+			snd_hda_codec_read(codec, nid, 0,
+					AC_VERB_SET_PIN_SENSE, 0);
 	}
 	return snd_hda_codec_read(codec, nid, 0,
 				  AC_VERB_GET_PIN_SENSE, 0);
@@ -1372,8 +1374,8 @@
  */
 int snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid)
 {
-        u32 sense = snd_hda_pin_sense(codec, nid);
-        return !!(sense & AC_PINSENSE_PRESENCE);
+	u32 sense = snd_hda_pin_sense(codec, nid);
+	return !!(sense & AC_PINSENSE_PRESENCE);
 }
 EXPORT_SYMBOL_HDA(snd_hda_jack_detect);
 
@@ -1952,7 +1954,7 @@
 	err = snd_hda_ctl_add(codec, 0, kctl);
 	if (err < 0)
 		return err;
-	
+
 	for (s = slaves; *s; s++) {
 		struct snd_kcontrol *sctl;
 		int i = 0;
@@ -2439,27 +2441,27 @@
 	{
 		.access = SNDRV_CTL_ELEM_ACCESS_READ,
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK),
 		.info = snd_hda_spdif_mask_info,
 		.get = snd_hda_spdif_cmask_get,
 	},
 	{
 		.access = SNDRV_CTL_ELEM_ACCESS_READ,
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PRO_MASK),
 		.info = snd_hda_spdif_mask_info,
 		.get = snd_hda_spdif_pmask_get,
 	},
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
 		.info = snd_hda_spdif_mask_info,
 		.get = snd_hda_spdif_default_get,
 		.put = snd_hda_spdif_default_put,
 	},
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH),
+		.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH),
 		.info = snd_hda_spdif_out_switch_info,
 		.get = snd_hda_spdif_out_switch_get,
 		.put = snd_hda_spdif_out_switch_put,
@@ -2610,7 +2612,7 @@
 static struct snd_kcontrol_new dig_in_ctls[] = {
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH),
+		.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, SWITCH),
 		.info = snd_hda_spdif_in_switch_info,
 		.get = snd_hda_spdif_in_switch_get,
 		.put = snd_hda_spdif_in_switch_put,
@@ -2618,7 +2620,7 @@
 	{
 		.access = SNDRV_CTL_ELEM_ACCESS_READ,
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = SNDRV_CTL_NAME_IEC958("",CAPTURE,DEFAULT),
+		.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT),
 		.info = snd_hda_spdif_mask_info,
 		.get = snd_hda_spdif_in_status_get,
 	},
@@ -2883,7 +2885,7 @@
 		int err = snd_hda_codec_build_controls(codec);
 		if (err < 0) {
 			printk(KERN_ERR "hda_codec: cannot build controls"
-			       "for #%d (error %d)\n", codec->addr, err); 
+			       "for #%d (error %d)\n", codec->addr, err);
 			err = snd_hda_codec_reset(codec);
 			if (err < 0) {
 				printk(KERN_ERR
@@ -2979,8 +2981,12 @@
 	val |= channels - 1;
 
 	switch (snd_pcm_format_width(format)) {
-	case 8:  val |= 0x00; break;
-	case 16: val |= 0x10; break;
+	case 8:
+		val |= 0x00;
+		break;
+	case 16:
+		val |= 0x10;
+		break;
 	case 20:
 	case 24:
 	case 32:
@@ -3298,7 +3304,8 @@
 		if (!test_and_set_bit(audio_idx[type][i], bus->pcm_dev_bits))
 			return audio_idx[type][i];
 
-	snd_printk(KERN_WARNING "Too many %s devices\n", snd_hda_pcm_type_name[type]);
+	snd_printk(KERN_WARNING "Too many %s devices\n",
+		snd_hda_pcm_type_name[type]);
 	return -EAGAIN;
 }
 
@@ -3336,7 +3343,7 @@
 		err = codec->patch_ops.build_pcms(codec);
 		if (err < 0) {
 			printk(KERN_ERR "hda_codec: cannot build PCMs"
-			       "for #%d (error %d)\n", codec->addr, err); 
+			       "for #%d (error %d)\n", codec->addr, err);
 			err = snd_hda_codec_reset(codec);
 			if (err < 0) {
 				printk(KERN_ERR
@@ -3466,8 +3473,8 @@
 
 /**
  * snd_hda_check_board_codec_sid_config - compare the current codec
-				          subsystem ID with the
-					  config table
+					subsystem ID with the
+					config table
 
 	   This is important for Gateway notebooks with SB450 HDA Audio
 	   where the vendor ID of the PCI device is:
@@ -3607,7 +3614,7 @@
  *
  * Increment the power-up counter and power up the hardware really when
  * not turned on yet.
- */ 
+ */
 void snd_hda_power_up(struct hda_codec *codec)
 {
 	struct hda_bus *bus = codec->bus;
@@ -3636,7 +3643,7 @@
  *
  * Decrement the power-up counter and schedules the power-off work if
  * the counter rearches to zero.
- */ 
+ */
 void snd_hda_power_down(struct hda_codec *codec)
 {
 	--codec->power_count;
@@ -3662,7 +3669,7 @@
  *
  * This function is supposed to be set or called from the check_power_status
  * patch ops.
- */ 
+ */
 int snd_hda_check_amp_list_power(struct hda_codec *codec,
 				 struct hda_loopback_check *check,
 				 hda_nid_t nid)
@@ -3830,7 +3837,7 @@
 {
 	/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
 	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
-		set_dig_out_convert(codec, nid, 
+		set_dig_out_convert(codec, nid,
 				    codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff,
 				    -1);
 	snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format);
@@ -4089,13 +4096,13 @@
 /*
  * Sort an associated group of pins according to their sequence numbers.
  */
-static void sort_pins_by_sequence(hda_nid_t * pins, short * sequences,
+static void sort_pins_by_sequence(hda_nid_t *pins, short *sequences,
 				  int num_pins)
 {
 	int i, j;
 	short seq;
 	hda_nid_t nid;
-	
+
 	for (i = 0; i < num_pins; i++) {
 		for (j = i + 1; j < num_pins; j++) {
 			if (sequences[i] > sequences[j]) {
@@ -4123,7 +4130,7 @@
  * is detected, one of speaker of HP pins is assigned as the primary
  * output, i.e. to line_out_pins[0].  So, line_outs is always positive
  * if any analog output exists.
- * 
+ *
  * The analog input pins are assigned to input_pins array.
  * The digital input/output pins are assigned to dig_in_pin and dig_out_pin,
  * respectively.
@@ -4186,9 +4193,9 @@
 		case AC_JACK_SPEAKER:
 			seq = get_defcfg_sequence(def_conf);
 			assoc = get_defcfg_association(def_conf);
-			if (! assoc)
+			if (!assoc)
 				continue;
-			if (! assoc_speaker)
+			if (!assoc_speaker)
 				assoc_speaker = assoc;
 			else if (assoc_speaker != assoc)
 				continue;
@@ -4286,7 +4293,7 @@
 			      cfg->speaker_outs);
 	sort_pins_by_sequence(cfg->hp_pins, sequences_hp,
 			      cfg->hp_outs);
-	
+
 	/* if we have only one mic, make it AUTO_PIN_MIC */
 	if (!cfg->input_pins[AUTO_PIN_MIC] &&
 	    cfg->input_pins[AUTO_PIN_FRONT_MIC]) {
@@ -4436,7 +4443,7 @@
 /**
  * snd_array_new - get a new element from the given array
  * @array: the array object
- * 
+ *
  * Get a new element from the given array.  If it exceeds the
  * pre-allocated array size, re-allocate the array.
  *
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index 4228f2f..dcd2244 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -331,6 +331,7 @@
 	return snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_HDMI_DIP_SIZE,
 						 AC_DIPSIZE_ELD_BUF);
 }
+EXPORT_SYMBOL_HDA(snd_hdmi_get_eld_size);
 
 int snd_hdmi_get_eld(struct hdmi_eld *eld,
 		     struct hda_codec *codec, hda_nid_t nid)
@@ -366,6 +367,7 @@
 	kfree(buf);
 	return ret;
 }
+EXPORT_SYMBOL_HDA(snd_hdmi_get_eld);
 
 static void hdmi_show_short_audio_desc(struct cea_sad *a)
 {
@@ -404,6 +406,7 @@
 	}
 	buf[j] = '\0';	/* necessary when j == 0 */
 }
+EXPORT_SYMBOL_HDA(snd_print_channel_allocation);
 
 void snd_hdmi_show_eld(struct hdmi_eld *e)
 {
@@ -422,6 +425,7 @@
 	for (i = 0; i < e->sad_count; i++)
 		hdmi_show_short_audio_desc(e->sad + i);
 }
+EXPORT_SYMBOL_HDA(snd_hdmi_show_eld);
 
 #ifdef CONFIG_PROC_FS
 
@@ -580,6 +584,7 @@
 
 	return 0;
 }
+EXPORT_SYMBOL_HDA(snd_hda_eld_proc_new);
 
 void snd_hda_eld_proc_free(struct hda_codec *codec, struct hdmi_eld *eld)
 {
@@ -588,5 +593,6 @@
 		eld->proc_entry = NULL;
 	}
 }
+EXPORT_SYMBOL_HDA(snd_hda_eld_proc_free);
 
 #endif /* CONFIG_PROC_FS */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index d5c93ad..da1ac90 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -267,7 +267,8 @@
 #define RIRB_INT_MASK		0x05
 
 /* STATESTS int mask: S3,SD2,SD1,SD0 */
-#define AZX_MAX_CODECS		4
+#define AZX_MAX_CODECS		8
+#define AZX_DEFAULT_CODECS	4
 #define STATESTS_INT_MASK	((1 << AZX_MAX_CODECS) - 1)
 
 /* SD_CTL bits */
@@ -1367,6 +1368,7 @@
 
 /* number of codec slots for each chipset: 0 = default slots (i.e. 4) */
 static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] __devinitdata = {
+	[AZX_DRIVER_NVIDIA] = 8,
 	[AZX_DRIVER_TERA] = 1,
 };
 
@@ -1399,7 +1401,7 @@
 	codecs = 0;
 	max_slots = azx_max_codecs[chip->driver_type];
 	if (!max_slots)
-		max_slots = AZX_MAX_CODECS;
+		max_slots = AZX_DEFAULT_CODECS;
 
 	/* First try to probe all given codec slots */
 	for (c = 0; c < max_slots; c++) {
@@ -2263,10 +2265,12 @@
 static struct snd_pci_quirk position_fix_list[] __devinitdata = {
 	SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1565, 0x820f, "Biostar Microtech", POS_FIX_LPIB),
 	{}
 };
 
@@ -2354,6 +2358,8 @@
 static struct snd_pci_quirk msi_black_list[] __devinitdata = {
 	SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */
 	SND_PCI_QUIRK(0x1043, 0x81f6, "ASUS", 0), /* nvidia */
+	SND_PCI_QUIRK(0x1043, 0x822d, "ASUS", 0), /* Athlon64 X2 + nvidia MCP55 */
+	SND_PCI_QUIRK(0x1849, 0x0888, "ASRock", 0), /* Athlon64 X2 + nvidia */
 	{}
 };
 
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
new file mode 100644
index 0000000..2c2bafb
--- /dev/null
+++ b/sound/pci/hda/patch_hdmi.c
@@ -0,0 +1,849 @@
+/*
+ *
+ *  patch_hdmi.c - routines for HDMI/DisplayPort codecs
+ *
+ *  Copyright(c) 2008-2010 Intel Corporation. All rights reserved.
+ *
+ *  Authors:
+ *			Wu Fengguang <wfg@linux.intel.com>
+ *
+ *  Maintained by:
+ *			Wu Fengguang <wfg@linux.intel.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the Free
+ *  Software Foundation; either version 2 of the License, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ *  or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software Foundation,
+ *  Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+
+struct hdmi_spec {
+	int num_cvts;
+	int num_pins;
+	hda_nid_t cvt[MAX_HDMI_CVTS+1];  /* audio sources */
+	hda_nid_t pin[MAX_HDMI_PINS+1];  /* audio sinks */
+
+	/*
+	 * source connection for each pin
+	 */
+	hda_nid_t pin_cvt[MAX_HDMI_PINS+1];
+
+	/*
+	 * HDMI sink attached to each pin
+	 */
+	struct hdmi_eld sink_eld[MAX_HDMI_PINS];
+
+	/*
+	 * export one pcm per pipe
+	 */
+	struct hda_pcm	pcm_rec[MAX_HDMI_CVTS];
+
+	/*
+	 * nvhdmi specific
+	 */
+	struct hda_multi_out multiout;
+	unsigned int codec_type;
+};
+
+
+struct hdmi_audio_infoframe {
+	u8 type; /* 0x84 */
+	u8 ver;  /* 0x01 */
+	u8 len;  /* 0x0a */
+
+	u8 checksum;	/* PB0 */
+	u8 CC02_CT47;	/* CC in bits 0:2, CT in 4:7 */
+	u8 SS01_SF24;
+	u8 CXT04;
+	u8 CA;
+	u8 LFEPBL01_LSV36_DM_INH7;
+	u8 reserved[5];	/* PB6 - PB10 */
+};
+
+/*
+ * CEA speaker placement:
+ *
+ *        FLH       FCH        FRH
+ *  FLW    FL  FLC   FC   FRC   FR   FRW
+ *
+ *                                  LFE
+ *                     TC
+ *
+ *          RL  RLC   RC   RRC   RR
+ *
+ * The Left/Right Surround channel _notions_ LS/RS in SMPTE 320M corresponds to
+ * CEA RL/RR; The SMPTE channel _assignment_ C/LFE is swapped to CEA LFE/FC.
+ */
+enum cea_speaker_placement {
+	FL  = (1 <<  0),	/* Front Left           */
+	FC  = (1 <<  1),	/* Front Center         */
+	FR  = (1 <<  2),	/* Front Right          */
+	FLC = (1 <<  3),	/* Front Left Center    */
+	FRC = (1 <<  4),	/* Front Right Center   */
+	RL  = (1 <<  5),	/* Rear Left            */
+	RC  = (1 <<  6),	/* Rear Center          */
+	RR  = (1 <<  7),	/* Rear Right           */
+	RLC = (1 <<  8),	/* Rear Left Center     */
+	RRC = (1 <<  9),	/* Rear Right Center    */
+	LFE = (1 << 10),	/* Low Frequency Effect */
+	FLW = (1 << 11),	/* Front Left Wide      */
+	FRW = (1 << 12),	/* Front Right Wide     */
+	FLH = (1 << 13),	/* Front Left High      */
+	FCH = (1 << 14),	/* Front Center High    */
+	FRH = (1 << 15),	/* Front Right High     */
+	TC  = (1 << 16),	/* Top Center           */
+};
+
+/*
+ * ELD SA bits in the CEA Speaker Allocation data block
+ */
+static int eld_speaker_allocation_bits[] = {
+	[0] = FL | FR,
+	[1] = LFE,
+	[2] = FC,
+	[3] = RL | RR,
+	[4] = RC,
+	[5] = FLC | FRC,
+	[6] = RLC | RRC,
+	/* the following are not defined in ELD yet */
+	[7] = FLW | FRW,
+	[8] = FLH | FRH,
+	[9] = TC,
+	[10] = FCH,
+};
+
+struct cea_channel_speaker_allocation {
+	int ca_index;
+	int speakers[8];
+
+	/* derived values, just for convenience */
+	int channels;
+	int spk_mask;
+};
+
+/*
+ * ALSA sequence is:
+ *
+ *       surround40   surround41   surround50   surround51   surround71
+ * ch0   front left   =            =            =            =
+ * ch1   front right  =            =            =            =
+ * ch2   rear left    =            =            =            =
+ * ch3   rear right   =            =            =            =
+ * ch4                LFE          center       center       center
+ * ch5                                          LFE          LFE
+ * ch6                                                       side left
+ * ch7                                                       side right
+ *
+ * surround71 = {FL, FR, RLC, RRC, FC, LFE, RL, RR}
+ */
+static int hdmi_channel_mapping[0x32][8] = {
+	/* stereo */
+	[0x00] = { 0x00, 0x11, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7 },
+	/* 2.1 */
+	[0x01] = { 0x00, 0x11, 0x22, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7 },
+	/* Dolby Surround */
+	[0x02] = { 0x00, 0x11, 0x23, 0xf2, 0xf4, 0xf5, 0xf6, 0xf7 },
+	/* surround40 */
+	[0x08] = { 0x00, 0x11, 0x24, 0x35, 0xf3, 0xf2, 0xf6, 0xf7 },
+	/* 4ch */
+	[0x03] = { 0x00, 0x11, 0x23, 0x32, 0x44, 0xf5, 0xf6, 0xf7 },
+	/* surround41 */
+	[0x09] = { 0x00, 0x11, 0x24, 0x34, 0x43, 0xf2, 0xf6, 0xf7 },
+	/* surround50 */
+	[0x0a] = { 0x00, 0x11, 0x24, 0x35, 0x43, 0xf2, 0xf6, 0xf7 },
+	/* surround51 */
+	[0x0b] = { 0x00, 0x11, 0x24, 0x35, 0x43, 0x52, 0xf6, 0xf7 },
+	/* 7.1 */
+	[0x13] = { 0x00, 0x11, 0x26, 0x37, 0x43, 0x52, 0x64, 0x75 },
+};
+
+/*
+ * This is an ordered list!
+ *
+ * The preceding ones have better chances to be selected by
+ * hdmi_setup_channel_allocation().
+ */
+static struct cea_channel_speaker_allocation channel_allocations[] = {
+/*			  channel:   7     6    5    4    3     2    1    0  */
+{ .ca_index = 0x00,  .speakers = {   0,    0,   0,   0,   0,    0,  FR,  FL } },
+				 /* 2.1 */
+{ .ca_index = 0x01,  .speakers = {   0,    0,   0,   0,   0,  LFE,  FR,  FL } },
+				 /* Dolby Surround */
+{ .ca_index = 0x02,  .speakers = {   0,    0,   0,   0,  FC,    0,  FR,  FL } },
+				 /* surround40 */
+{ .ca_index = 0x08,  .speakers = {   0,    0,  RR,  RL,   0,    0,  FR,  FL } },
+				 /* surround41 */
+{ .ca_index = 0x09,  .speakers = {   0,    0,  RR,  RL,   0,  LFE,  FR,  FL } },
+				 /* surround50 */
+{ .ca_index = 0x0a,  .speakers = {   0,    0,  RR,  RL,  FC,    0,  FR,  FL } },
+				 /* surround51 */
+{ .ca_index = 0x0b,  .speakers = {   0,    0,  RR,  RL,  FC,  LFE,  FR,  FL } },
+				 /* 6.1 */
+{ .ca_index = 0x0f,  .speakers = {   0,   RC,  RR,  RL,  FC,  LFE,  FR,  FL } },
+				 /* surround71 */
+{ .ca_index = 0x13,  .speakers = { RRC,  RLC,  RR,  RL,  FC,  LFE,  FR,  FL } },
+
+{ .ca_index = 0x03,  .speakers = {   0,    0,   0,   0,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x04,  .speakers = {   0,    0,   0,  RC,   0,    0,  FR,  FL } },
+{ .ca_index = 0x05,  .speakers = {   0,    0,   0,  RC,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x06,  .speakers = {   0,    0,   0,  RC,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x07,  .speakers = {   0,    0,   0,  RC,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x0c,  .speakers = {   0,   RC,  RR,  RL,   0,    0,  FR,  FL } },
+{ .ca_index = 0x0d,  .speakers = {   0,   RC,  RR,  RL,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x0e,  .speakers = {   0,   RC,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x10,  .speakers = { RRC,  RLC,  RR,  RL,   0,    0,  FR,  FL } },
+{ .ca_index = 0x11,  .speakers = { RRC,  RLC,  RR,  RL,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x12,  .speakers = { RRC,  RLC,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x14,  .speakers = { FRC,  FLC,   0,   0,   0,    0,  FR,  FL } },
+{ .ca_index = 0x15,  .speakers = { FRC,  FLC,   0,   0,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x16,  .speakers = { FRC,  FLC,   0,   0,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x17,  .speakers = { FRC,  FLC,   0,   0,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x18,  .speakers = { FRC,  FLC,   0,  RC,   0,    0,  FR,  FL } },
+{ .ca_index = 0x19,  .speakers = { FRC,  FLC,   0,  RC,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x1a,  .speakers = { FRC,  FLC,   0,  RC,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x1b,  .speakers = { FRC,  FLC,   0,  RC,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x1c,  .speakers = { FRC,  FLC,  RR,  RL,   0,    0,  FR,  FL } },
+{ .ca_index = 0x1d,  .speakers = { FRC,  FLC,  RR,  RL,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x1e,  .speakers = { FRC,  FLC,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x1f,  .speakers = { FRC,  FLC,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x20,  .speakers = {   0,  FCH,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x21,  .speakers = {   0,  FCH,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x22,  .speakers = {  TC,    0,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x23,  .speakers = {  TC,    0,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x24,  .speakers = { FRH,  FLH,  RR,  RL,   0,    0,  FR,  FL } },
+{ .ca_index = 0x25,  .speakers = { FRH,  FLH,  RR,  RL,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x26,  .speakers = { FRW,  FLW,  RR,  RL,   0,    0,  FR,  FL } },
+{ .ca_index = 0x27,  .speakers = { FRW,  FLW,  RR,  RL,   0,  LFE,  FR,  FL } },
+{ .ca_index = 0x28,  .speakers = {  TC,   RC,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x29,  .speakers = {  TC,   RC,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x2a,  .speakers = { FCH,   RC,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x2b,  .speakers = { FCH,   RC,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x2c,  .speakers = {  TC,  FCH,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x2d,  .speakers = {  TC,  FCH,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x2e,  .speakers = { FRH,  FLH,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x2f,  .speakers = { FRH,  FLH,  RR,  RL,  FC,  LFE,  FR,  FL } },
+{ .ca_index = 0x30,  .speakers = { FRW,  FLW,  RR,  RL,  FC,    0,  FR,  FL } },
+{ .ca_index = 0x31,  .speakers = { FRW,  FLW,  RR,  RL,  FC,  LFE,  FR,  FL } },
+};
+
+
+/*
+ * HDMI routines
+ */
+
+static int hda_node_index(hda_nid_t *nids, hda_nid_t nid)
+{
+	int i;
+
+	for (i = 0; nids[i]; i++)
+		if (nids[i] == nid)
+			return i;
+
+	snd_printk(KERN_WARNING "HDMI: nid %d not registered\n", nid);
+	return -EINVAL;
+}
+
+static void hdmi_get_show_eld(struct hda_codec *codec, hda_nid_t pin_nid,
+			      struct hdmi_eld *eld)
+{
+	if (!snd_hdmi_get_eld(eld, codec, pin_nid))
+		snd_hdmi_show_eld(eld);
+}
+
+#ifdef BE_PARANOID
+static void hdmi_get_dip_index(struct hda_codec *codec, hda_nid_t pin_nid,
+				int *packet_index, int *byte_index)
+{
+	int val;
+
+	val = snd_hda_codec_read(codec, pin_nid, 0,
+				 AC_VERB_GET_HDMI_DIP_INDEX, 0);
+
+	*packet_index = val >> 5;
+	*byte_index = val & 0x1f;
+}
+#endif
+
+static void hdmi_set_dip_index(struct hda_codec *codec, hda_nid_t pin_nid,
+				int packet_index, int byte_index)
+{
+	int val;
+
+	val = (packet_index << 5) | (byte_index & 0x1f);
+
+	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_INDEX, val);
+}
+
+static void hdmi_write_dip_byte(struct hda_codec *codec, hda_nid_t pin_nid,
+				unsigned char val)
+{
+	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_DATA, val);
+}
+
+static void hdmi_enable_output(struct hda_codec *codec, hda_nid_t pin_nid)
+{
+	/* Unmute */
+	if (get_wcaps(codec, pin_nid) & AC_WCAP_OUT_AMP)
+		snd_hda_codec_write(codec, pin_nid, 0,
+				AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+	/* Enable pin out */
+	snd_hda_codec_write(codec, pin_nid, 0,
+			    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+}
+
+static int hdmi_get_channel_count(struct hda_codec *codec, hda_nid_t nid)
+{
+	return 1 + snd_hda_codec_read(codec, nid, 0,
+					AC_VERB_GET_CVT_CHAN_COUNT, 0);
+}
+
+static void hdmi_set_channel_count(struct hda_codec *codec,
+				   hda_nid_t nid, int chs)
+{
+	if (chs != hdmi_get_channel_count(codec, nid))
+		snd_hda_codec_write(codec, nid, 0,
+				    AC_VERB_SET_CVT_CHAN_COUNT, chs - 1);
+}
+
+
+/*
+ * Channel mapping routines
+ */
+
+/*
+ * Compute derived values in channel_allocations[].
+ */
+static void init_channel_allocations(void)
+{
+	int i, j;
+	struct cea_channel_speaker_allocation *p;
+
+	for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
+		p = channel_allocations + i;
+		p->channels = 0;
+		p->spk_mask = 0;
+		for (j = 0; j < ARRAY_SIZE(p->speakers); j++)
+			if (p->speakers[j]) {
+				p->channels++;
+				p->spk_mask |= p->speakers[j];
+			}
+	}
+}
+
+/*
+ * The transformation takes two steps:
+ *
+ *	eld->spk_alloc => (eld_speaker_allocation_bits[]) => spk_mask
+ *	      spk_mask => (channel_allocations[])         => ai->CA
+ *
+ * TODO: it could select the wrong CA from multiple candidates.
+*/
+static int hdmi_setup_channel_allocation(struct hda_codec *codec, hda_nid_t nid,
+					 struct hdmi_audio_infoframe *ai)
+{
+	struct hdmi_spec *spec = codec->spec;
+	struct hdmi_eld *eld;
+	int i;
+	int spk_mask = 0;
+	int channels = 1 + (ai->CC02_CT47 & 0x7);
+	char buf[SND_PRINT_CHANNEL_ALLOCATION_ADVISED_BUFSIZE];
+
+	/*
+	 * CA defaults to 0 for basic stereo audio
+	 */
+	if (channels <= 2)
+		return 0;
+
+	i = hda_node_index(spec->pin_cvt, nid);
+	if (i < 0)
+		return 0;
+	eld = &spec->sink_eld[i];
+
+	/*
+	 * HDMI sink's ELD info cannot always be retrieved for now, e.g.
+	 * in console or for audio devices. Assume the highest speakers
+	 * configuration, to _not_ prohibit multi-channel audio playback.
+	 */
+	if (!eld->spk_alloc)
+		eld->spk_alloc = 0xffff;
+
+	/*
+	 * expand ELD's speaker allocation mask
+	 *
+	 * ELD tells the speaker mask in a compact(paired) form,
+	 * expand ELD's notions to match the ones used by Audio InfoFrame.
+	 */
+	for (i = 0; i < ARRAY_SIZE(eld_speaker_allocation_bits); i++) {
+		if (eld->spk_alloc & (1 << i))
+			spk_mask |= eld_speaker_allocation_bits[i];
+	}
+
+	/* search for the first working match in the CA table */
+	for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
+		if (channels == channel_allocations[i].channels &&
+		    (spk_mask & channel_allocations[i].spk_mask) ==
+				channel_allocations[i].spk_mask) {
+			ai->CA = channel_allocations[i].ca_index;
+			break;
+		}
+	}
+
+	snd_print_channel_allocation(eld->spk_alloc, buf, sizeof(buf));
+	snd_printdd("HDMI: select CA 0x%x for %d-channel allocation: %s\n",
+		    ai->CA, channels, buf);
+
+	return ai->CA;
+}
+
+static void hdmi_debug_channel_mapping(struct hda_codec *codec,
+				       hda_nid_t pin_nid)
+{
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+	int i;
+	int slot;
+
+	for (i = 0; i < 8; i++) {
+		slot = snd_hda_codec_read(codec, pin_nid, 0,
+						AC_VERB_GET_HDMI_CHAN_SLOT, i);
+		printk(KERN_DEBUG "HDMI: ASP channel %d => slot %d\n",
+						slot >> 4, slot & 0xf);
+	}
+#endif
+}
+
+
+static void hdmi_setup_channel_mapping(struct hda_codec *codec,
+				       hda_nid_t pin_nid,
+				       struct hdmi_audio_infoframe *ai)
+{
+	int i;
+	int ca = ai->CA;
+	int err;
+
+	if (hdmi_channel_mapping[ca][1] == 0) {
+		for (i = 0; i < channel_allocations[ca].channels; i++)
+			hdmi_channel_mapping[ca][i] = i | (i << 4);
+		for (; i < 8; i++)
+			hdmi_channel_mapping[ca][i] = 0xf | (i << 4);
+	}
+
+	for (i = 0; i < 8; i++) {
+		err = snd_hda_codec_write(codec, pin_nid, 0,
+					  AC_VERB_SET_HDMI_CHAN_SLOT,
+					  hdmi_channel_mapping[ca][i]);
+		if (err) {
+			snd_printdd(KERN_NOTICE
+				    "HDMI: channel mapping failed\n");
+			break;
+		}
+	}
+
+	hdmi_debug_channel_mapping(codec, pin_nid);
+}
+
+
+/*
+ * Audio InfoFrame routines
+ */
+
+/*
+ * Enable Audio InfoFrame Transmission
+ */
+static void hdmi_start_infoframe_trans(struct hda_codec *codec,
+				       hda_nid_t pin_nid)
+{
+	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
+	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
+						AC_DIPXMIT_BEST);
+}
+
+/*
+ * Disable Audio InfoFrame Transmission
+ */
+static void hdmi_stop_infoframe_trans(struct hda_codec *codec,
+				      hda_nid_t pin_nid)
+{
+	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
+	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
+						AC_DIPXMIT_DISABLE);
+}
+
+static void hdmi_debug_dip_size(struct hda_codec *codec, hda_nid_t pin_nid)
+{
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+	int i;
+	int size;
+
+	size = snd_hdmi_get_eld_size(codec, pin_nid);
+	printk(KERN_DEBUG "HDMI: ELD buf size is %d\n", size);
+
+	for (i = 0; i < 8; i++) {
+		size = snd_hda_codec_read(codec, pin_nid, 0,
+						AC_VERB_GET_HDMI_DIP_SIZE, i);
+		printk(KERN_DEBUG "HDMI: DIP GP[%d] buf size is %d\n", i, size);
+	}
+#endif
+}
+
+static void hdmi_clear_dip_buffers(struct hda_codec *codec, hda_nid_t pin_nid)
+{
+#ifdef BE_PARANOID
+	int i, j;
+	int size;
+	int pi, bi;
+	for (i = 0; i < 8; i++) {
+		size = snd_hda_codec_read(codec, pin_nid, 0,
+						AC_VERB_GET_HDMI_DIP_SIZE, i);
+		if (size == 0)
+			continue;
+
+		hdmi_set_dip_index(codec, pin_nid, i, 0x0);
+		for (j = 1; j < 1000; j++) {
+			hdmi_write_dip_byte(codec, pin_nid, 0x0);
+			hdmi_get_dip_index(codec, pin_nid, &pi, &bi);
+			if (pi != i)
+				snd_printd(KERN_INFO "dip index %d: %d != %d\n",
+						bi, pi, i);
+			if (bi == 0) /* byte index wrapped around */
+				break;
+		}
+		snd_printd(KERN_INFO
+			"HDMI: DIP GP[%d] buf reported size=%d, written=%d\n",
+			i, size, j);
+	}
+#endif
+}
+
+static void hdmi_checksum_audio_infoframe(struct hdmi_audio_infoframe *ai)
+{
+	u8 *bytes = (u8 *)ai;
+	u8 sum = 0;
+	int i;
+
+	ai->checksum = 0;
+
+	for (i = 0; i < sizeof(*ai); i++)
+		sum += bytes[i];
+
+	ai->checksum = -sum;
+}
+
+static void hdmi_fill_audio_infoframe(struct hda_codec *codec,
+				      hda_nid_t pin_nid,
+				      struct hdmi_audio_infoframe *ai)
+{
+	u8 *bytes = (u8 *)ai;
+	int i;
+
+	hdmi_debug_dip_size(codec, pin_nid);
+	hdmi_clear_dip_buffers(codec, pin_nid); /* be paranoid */
+
+	hdmi_checksum_audio_infoframe(ai);
+
+	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
+	for (i = 0; i < sizeof(*ai); i++)
+		hdmi_write_dip_byte(codec, pin_nid, bytes[i]);
+}
+
+static bool hdmi_infoframe_uptodate(struct hda_codec *codec, hda_nid_t pin_nid,
+				    struct hdmi_audio_infoframe *ai)
+{
+	u8 *bytes = (u8 *)ai;
+	u8 val;
+	int i;
+
+	if (snd_hda_codec_read(codec, pin_nid, 0, AC_VERB_GET_HDMI_DIP_XMIT, 0)
+							    != AC_DIPXMIT_BEST)
+		return false;
+
+	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
+	for (i = 0; i < sizeof(*ai); i++) {
+		val = snd_hda_codec_read(codec, pin_nid, 0,
+					 AC_VERB_GET_HDMI_DIP_DATA, 0);
+		if (val != bytes[i])
+			return false;
+	}
+
+	return true;
+}
+
+static void hdmi_setup_audio_infoframe(struct hda_codec *codec, hda_nid_t nid,
+					struct snd_pcm_substream *substream)
+{
+	struct hdmi_spec *spec = codec->spec;
+	hda_nid_t pin_nid;
+	int i;
+	struct hdmi_audio_infoframe ai = {
+		.type		= 0x84,
+		.ver		= 0x01,
+		.len		= 0x0a,
+		.CC02_CT47	= substream->runtime->channels - 1,
+	};
+
+	hdmi_setup_channel_allocation(codec, nid, &ai);
+
+	for (i = 0; i < spec->num_pins; i++) {
+		if (spec->pin_cvt[i] != nid)
+			continue;
+		if (!spec->sink_eld[i].monitor_present)
+			continue;
+
+		pin_nid = spec->pin[i];
+		if (!hdmi_infoframe_uptodate(codec, pin_nid, &ai)) {
+			snd_printdd("hdmi_setup_audio_infoframe: "
+				    "cvt=%d pin=%d channels=%d\n",
+				    nid, pin_nid,
+				    substream->runtime->channels);
+			hdmi_setup_channel_mapping(codec, pin_nid, &ai);
+			hdmi_stop_infoframe_trans(codec, pin_nid);
+			hdmi_fill_audio_infoframe(codec, pin_nid, &ai);
+			hdmi_start_infoframe_trans(codec, pin_nid);
+		}
+	}
+}
+
+
+/*
+ * Unsolicited events
+ */
+
+static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
+{
+	struct hdmi_spec *spec = codec->spec;
+	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
+	int pind = !!(res & AC_UNSOL_RES_PD);
+	int eldv = !!(res & AC_UNSOL_RES_ELDV);
+	int index;
+
+	printk(KERN_INFO
+		"HDMI hot plug event: Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
+		tag, pind, eldv);
+
+	index = hda_node_index(spec->pin, tag);
+	if (index < 0)
+		return;
+
+	spec->sink_eld[index].monitor_present = pind;
+	spec->sink_eld[index].eld_valid = eldv;
+
+	if (pind && eldv) {
+		hdmi_get_show_eld(codec, spec->pin[index],
+				  &spec->sink_eld[index]);
+		/* TODO: do real things about ELD */
+	}
+}
+
+static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res)
+{
+	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
+	int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
+	int cp_state = !!(res & AC_UNSOL_RES_CP_STATE);
+	int cp_ready = !!(res & AC_UNSOL_RES_CP_READY);
+
+	printk(KERN_INFO
+		"HDMI CP event: PIN=%d SUBTAG=0x%x CP_STATE=%d CP_READY=%d\n",
+		tag,
+		subtag,
+		cp_state,
+		cp_ready);
+
+	/* TODO */
+	if (cp_state)
+		;
+	if (cp_ready)
+		;
+}
+
+
+static void hdmi_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+	struct hdmi_spec *spec = codec->spec;
+	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
+	int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
+
+	if (hda_node_index(spec->pin, tag) < 0) {
+		snd_printd(KERN_INFO "Unexpected HDMI event tag 0x%x\n", tag);
+		return;
+	}
+
+	if (subtag == 0)
+		hdmi_intrinsic_event(codec, res);
+	else
+		hdmi_non_intrinsic_event(codec, res);
+}
+
+/*
+ * Callbacks
+ */
+
+static void hdmi_setup_stream(struct hda_codec *codec, hda_nid_t nid,
+			      u32 stream_tag, int format)
+{
+	int tag;
+	int fmt;
+
+	tag = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONV, 0) >> 4;
+	fmt = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_STREAM_FORMAT, 0);
+
+	snd_printdd("hdmi_setup_stream: "
+		    "NID=0x%x, %sstream=0x%x, %sformat=0x%x\n",
+		    nid,
+		    tag == stream_tag ? "" : "new-",
+		    stream_tag,
+		    fmt == format ? "" : "new-",
+		    format);
+
+	if (tag != stream_tag)
+		snd_hda_codec_write(codec, nid, 0,
+				    AC_VERB_SET_CHANNEL_STREAMID,
+				    stream_tag << 4);
+	if (fmt != format)
+		snd_hda_codec_write(codec, nid, 0,
+				    AC_VERB_SET_STREAM_FORMAT, format);
+}
+
+/*
+ * HDA/HDMI auto parsing
+ */
+
+static int hdmi_read_pin_conn(struct hda_codec *codec, hda_nid_t pin_nid)
+{
+	struct hdmi_spec *spec = codec->spec;
+	hda_nid_t conn_list[HDA_MAX_CONNECTIONS];
+	int conn_len, curr;
+	int index;
+
+	if (!(get_wcaps(codec, pin_nid) & AC_WCAP_CONN_LIST)) {
+		snd_printk(KERN_WARNING
+			   "HDMI: pin %d wcaps %#x "
+			   "does not support connection list\n",
+			   pin_nid, get_wcaps(codec, pin_nid));
+		return -EINVAL;
+	}
+
+	conn_len = snd_hda_get_connections(codec, pin_nid, conn_list,
+					   HDA_MAX_CONNECTIONS);
+	if (conn_len > 1)
+		curr = snd_hda_codec_read(codec, pin_nid, 0,
+					  AC_VERB_GET_CONNECT_SEL, 0);
+	else
+		curr = 0;
+
+	index = hda_node_index(spec->pin, pin_nid);
+	if (index < 0)
+		return -EINVAL;
+
+	spec->pin_cvt[index] = conn_list[curr];
+
+	return 0;
+}
+
+static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
+			       struct hdmi_eld *eld)
+{
+	int present = snd_hda_pin_sense(codec, pin_nid);
+
+	eld->monitor_present	= !!(present & AC_PINSENSE_PRESENCE);
+	eld->eld_valid		= !!(present & AC_PINSENSE_ELDV);
+
+	if (present & AC_PINSENSE_ELDV)
+		hdmi_get_show_eld(codec, pin_nid, eld);
+}
+
+static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
+{
+	struct hdmi_spec *spec = codec->spec;
+
+	if (spec->num_pins >= MAX_HDMI_PINS) {
+		snd_printk(KERN_WARNING
+			   "HDMI: no space for pin %d\n", pin_nid);
+		return -EINVAL;
+	}
+
+	hdmi_present_sense(codec, pin_nid, &spec->sink_eld[spec->num_pins]);
+
+	spec->pin[spec->num_pins] = pin_nid;
+	spec->num_pins++;
+
+	/*
+	 * It is assumed that converter nodes come first in the node list and
+	 * hence have been registered and usable now.
+	 */
+	return hdmi_read_pin_conn(codec, pin_nid);
+}
+
+static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t nid)
+{
+	struct hdmi_spec *spec = codec->spec;
+
+	if (spec->num_cvts >= MAX_HDMI_CVTS) {
+		snd_printk(KERN_WARNING
+			   "HDMI: no space for converter %d\n", nid);
+		return -EINVAL;
+	}
+
+	spec->cvt[spec->num_cvts] = nid;
+	spec->num_cvts++;
+
+	return 0;
+}
+
+static int hdmi_parse_codec(struct hda_codec *codec)
+{
+	hda_nid_t nid;
+	int i, nodes;
+
+	nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid);
+	if (!nid || nodes < 0) {
+		snd_printk(KERN_WARNING "HDMI: failed to get afg sub nodes\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < nodes; i++, nid++) {
+		unsigned int caps;
+		unsigned int type;
+
+		caps = snd_hda_param_read(codec, nid, AC_PAR_AUDIO_WIDGET_CAP);
+		type = get_wcaps_type(caps);
+
+		if (!(caps & AC_WCAP_DIGITAL))
+			continue;
+
+		switch (type) {
+		case AC_WID_AUD_OUT:
+			if (hdmi_add_cvt(codec, nid) < 0)
+				return -EINVAL;
+			break;
+		case AC_WID_PIN:
+			caps = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
+			if (!(caps & (AC_PINCAP_HDMI | AC_PINCAP_DP)))
+				continue;
+			if (hdmi_add_pin(codec, nid) < 0)
+				return -EINVAL;
+			break;
+		}
+	}
+
+	/*
+	 * G45/IbexPeak don't support EPSS: the unsolicited pin hot plug event
+	 * can be lost and presence sense verb will become inaccurate if the
+	 * HDA link is powered off at hot plug or hw initialization time.
+	 */
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+	if (!(snd_hda_param_read(codec, codec->afg, AC_PAR_POWER_STATE) &
+	      AC_PWRST_EPSS))
+		codec->bus->power_keep_link_on = 1;
+#endif
+
+	return 0;
+}
+
diff --git a/sound/pci/hda/patch_intelhdmi.c b/sound/pci/hda/patch_intelhdmi.c
index 918f403..88d0351 100644
--- a/sound/pci/hda/patch_intelhdmi.c
+++ b/sound/pci/hda/patch_intelhdmi.c
@@ -40,814 +40,19 @@
  *
  * The HDA correspondence of pipes/ports are converter/pin nodes.
  */
-#define INTEL_HDMI_CVTS	2
-#define INTEL_HDMI_PINS	3
+#define MAX_HDMI_CVTS	2
+#define MAX_HDMI_PINS	3
 
-static char *intel_hdmi_pcm_names[INTEL_HDMI_CVTS] = {
+#include "patch_hdmi.c"
+
+static char *intel_hdmi_pcm_names[MAX_HDMI_CVTS] = {
 	"INTEL HDMI 0",
 	"INTEL HDMI 1",
 };
 
-struct intel_hdmi_spec {
-	int num_cvts;
-	int num_pins;
-	hda_nid_t cvt[INTEL_HDMI_CVTS+1];  /* audio sources */
-	hda_nid_t pin[INTEL_HDMI_PINS+1];  /* audio sinks */
-
-	/*
-	 * source connection for each pin
-	 */
-	hda_nid_t pin_cvt[INTEL_HDMI_PINS+1];
-
-	/*
-	 * HDMI sink attached to each pin
-	 */
-	struct hdmi_eld sink_eld[INTEL_HDMI_PINS];
-
-	/*
-	 * export one pcm per pipe
-	 */
-	struct hda_pcm	pcm_rec[INTEL_HDMI_CVTS];
-};
-
-struct hdmi_audio_infoframe {
-	u8 type; /* 0x84 */
-	u8 ver;  /* 0x01 */
-	u8 len;  /* 0x0a */
-
-	u8 checksum;	/* PB0 */
-	u8 CC02_CT47;	/* CC in bits 0:2, CT in 4:7 */
-	u8 SS01_SF24;
-	u8 CXT04;
-	u8 CA;
-	u8 LFEPBL01_LSV36_DM_INH7;
-	u8 reserved[5];	/* PB6 - PB10 */
-};
-
 /*
- * CEA speaker placement:
- *
- *        FLH       FCH        FRH
- *  FLW    FL  FLC   FC   FRC   FR   FRW
- *
- *                                  LFE
- *                     TC
- *
- *          RL  RLC   RC   RRC   RR
- *
- * The Left/Right Surround channel _notions_ LS/RS in SMPTE 320M corresponds to
- * CEA RL/RR; The SMPTE channel _assignment_ C/LFE is swapped to CEA LFE/FC.
+ * HDMI callbacks
  */
-enum cea_speaker_placement {
-	FL  = (1 <<  0),	/* Front Left           */
-	FC  = (1 <<  1),	/* Front Center         */
-	FR  = (1 <<  2),	/* Front Right          */
-	FLC = (1 <<  3),	/* Front Left Center    */
-	FRC = (1 <<  4),	/* Front Right Center   */
-	RL  = (1 <<  5),	/* Rear Left            */
-	RC  = (1 <<  6),	/* Rear Center          */
-	RR  = (1 <<  7),	/* Rear Right           */
-	RLC = (1 <<  8),	/* Rear Left Center     */
-	RRC = (1 <<  9),	/* Rear Right Center    */
-	LFE = (1 << 10),	/* Low Frequency Effect */
-	FLW = (1 << 11),	/* Front Left Wide      */
-	FRW = (1 << 12),	/* Front Right Wide     */
-	FLH = (1 << 13),	/* Front Left High      */
-	FCH = (1 << 14),	/* Front Center High    */
-	FRH = (1 << 15),	/* Front Right High     */
-	TC  = (1 << 16),	/* Top Center           */
-};
-
-/*
- * ELD SA bits in the CEA Speaker Allocation data block
- */
-static int eld_speaker_allocation_bits[] = {
-	[0] = FL | FR,
-	[1] = LFE,
-	[2] = FC,
-	[3] = RL | RR,
-	[4] = RC,
-	[5] = FLC | FRC,
-	[6] = RLC | RRC,
-	/* the following are not defined in ELD yet */
-	[7] = FLW | FRW,
-	[8] = FLH | FRH,
-	[9] = TC,
-	[10] = FCH,
-};
-
-struct cea_channel_speaker_allocation {
-	int ca_index;
-	int speakers[8];
-
-	/* derived values, just for convenience */
-	int channels;
-	int spk_mask;
-};
-
-/*
- * ALSA sequence is:
- *
- *       surround40   surround41   surround50   surround51   surround71
- * ch0   front left   =            =            =            =
- * ch1   front right  =            =            =            =
- * ch2   rear left    =            =            =            =
- * ch3   rear right   =            =            =            =
- * ch4                LFE          center       center       center
- * ch5                                          LFE          LFE
- * ch6                                                       side left
- * ch7                                                       side right
- *
- * surround71 = {FL, FR, RLC, RRC, FC, LFE, RL, RR}
- */
-static int hdmi_channel_mapping[0x32][8] = {
-	/* stereo */
-	[0x00] = { 0x00, 0x11, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7 },
-	/* 2.1 */
-	[0x01] = { 0x00, 0x11, 0x22, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7 },
-	/* Dolby Surround */
-	[0x02] = { 0x00, 0x11, 0x23, 0xf2, 0xf4, 0xf5, 0xf6, 0xf7 },
-	/* surround40 */
-	[0x08] = { 0x00, 0x11, 0x24, 0x35, 0xf3, 0xf2, 0xf6, 0xf7 },
-	/* 4ch */
-	[0x03] = { 0x00, 0x11, 0x23, 0x32, 0x44, 0xf5, 0xf6, 0xf7 },
-	/* surround41 */
-	[0x09] = { 0x00, 0x11, 0x24, 0x34, 0x43, 0xf2, 0xf6, 0xf7 },
-	/* surround50 */
-	[0x0a] = { 0x00, 0x11, 0x24, 0x35, 0x43, 0xf2, 0xf6, 0xf7 },
-	/* surround51 */
-	[0x0b] = { 0x00, 0x11, 0x24, 0x35, 0x43, 0x52, 0xf6, 0xf7 },
-	/* 7.1 */
-	[0x13] = { 0x00, 0x11, 0x26, 0x37, 0x43, 0x52, 0x64, 0x75 },
-};
-
-/*
- * This is an ordered list!
- *
- * The preceding ones have better chances to be selected by
- * hdmi_setup_channel_allocation().
- */
-static struct cea_channel_speaker_allocation channel_allocations[] = {
-/* 			  channel:   7     6    5    4    3     2    1    0  */
-{ .ca_index = 0x00,  .speakers = {   0,    0,   0,   0,   0,    0,  FR,  FL } },
-				 /* 2.1 */
-{ .ca_index = 0x01,  .speakers = {   0,    0,   0,   0,   0,  LFE,  FR,  FL } },
-				 /* Dolby Surround */
-{ .ca_index = 0x02,  .speakers = {   0,    0,   0,   0,  FC,    0,  FR,  FL } },
-				 /* surround40 */
-{ .ca_index = 0x08,  .speakers = {   0,    0,  RR,  RL,   0,    0,  FR,  FL } },
-				 /* surround41 */
-{ .ca_index = 0x09,  .speakers = {   0,    0,  RR,  RL,   0,  LFE,  FR,  FL } },
-				 /* surround50 */
-{ .ca_index = 0x0a,  .speakers = {   0,    0,  RR,  RL,  FC,    0,  FR,  FL } },
-				 /* surround51 */
-{ .ca_index = 0x0b,  .speakers = {   0,    0,  RR,  RL,  FC,  LFE,  FR,  FL } },
-				 /* 6.1 */
-{ .ca_index = 0x0f,  .speakers = {   0,   RC,  RR,  RL,  FC,  LFE,  FR,  FL } },
-				 /* surround71 */
-{ .ca_index = 0x13,  .speakers = { RRC,  RLC,  RR,  RL,  FC,  LFE,  FR,  FL } },
-
-{ .ca_index = 0x03,  .speakers = {   0,    0,   0,   0,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x04,  .speakers = {   0,    0,   0,  RC,   0,    0,  FR,  FL } },
-{ .ca_index = 0x05,  .speakers = {   0,    0,   0,  RC,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x06,  .speakers = {   0,    0,   0,  RC,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x07,  .speakers = {   0,    0,   0,  RC,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x0c,  .speakers = {   0,   RC,  RR,  RL,   0,    0,  FR,  FL } },
-{ .ca_index = 0x0d,  .speakers = {   0,   RC,  RR,  RL,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x0e,  .speakers = {   0,   RC,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x10,  .speakers = { RRC,  RLC,  RR,  RL,   0,    0,  FR,  FL } },
-{ .ca_index = 0x11,  .speakers = { RRC,  RLC,  RR,  RL,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x12,  .speakers = { RRC,  RLC,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x14,  .speakers = { FRC,  FLC,   0,   0,   0,    0,  FR,  FL } },
-{ .ca_index = 0x15,  .speakers = { FRC,  FLC,   0,   0,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x16,  .speakers = { FRC,  FLC,   0,   0,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x17,  .speakers = { FRC,  FLC,   0,   0,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x18,  .speakers = { FRC,  FLC,   0,  RC,   0,    0,  FR,  FL } },
-{ .ca_index = 0x19,  .speakers = { FRC,  FLC,   0,  RC,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x1a,  .speakers = { FRC,  FLC,   0,  RC,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x1b,  .speakers = { FRC,  FLC,   0,  RC,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x1c,  .speakers = { FRC,  FLC,  RR,  RL,   0,    0,  FR,  FL } },
-{ .ca_index = 0x1d,  .speakers = { FRC,  FLC,  RR,  RL,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x1e,  .speakers = { FRC,  FLC,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x1f,  .speakers = { FRC,  FLC,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x20,  .speakers = {   0,  FCH,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x21,  .speakers = {   0,  FCH,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x22,  .speakers = {  TC,    0,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x23,  .speakers = {  TC,    0,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x24,  .speakers = { FRH,  FLH,  RR,  RL,   0,    0,  FR,  FL } },
-{ .ca_index = 0x25,  .speakers = { FRH,  FLH,  RR,  RL,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x26,  .speakers = { FRW,  FLW,  RR,  RL,   0,    0,  FR,  FL } },
-{ .ca_index = 0x27,  .speakers = { FRW,  FLW,  RR,  RL,   0,  LFE,  FR,  FL } },
-{ .ca_index = 0x28,  .speakers = {  TC,   RC,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x29,  .speakers = {  TC,   RC,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x2a,  .speakers = { FCH,   RC,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x2b,  .speakers = { FCH,   RC,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x2c,  .speakers = {  TC,  FCH,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x2d,  .speakers = {  TC,  FCH,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x2e,  .speakers = { FRH,  FLH,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x2f,  .speakers = { FRH,  FLH,  RR,  RL,  FC,  LFE,  FR,  FL } },
-{ .ca_index = 0x30,  .speakers = { FRW,  FLW,  RR,  RL,  FC,    0,  FR,  FL } },
-{ .ca_index = 0x31,  .speakers = { FRW,  FLW,  RR,  RL,  FC,  LFE,  FR,  FL } },
-};
-
-/*
- * HDA/HDMI auto parsing
- */
-
-static int hda_node_index(hda_nid_t *nids, hda_nid_t nid)
-{
-	int i;
-
-	for (i = 0; nids[i]; i++)
-		if (nids[i] == nid)
-			return i;
-
-	snd_printk(KERN_WARNING "HDMI: nid %d not registered\n", nid);
-	return -EINVAL;
-}
-
-static int intel_hdmi_read_pin_conn(struct hda_codec *codec, hda_nid_t pin_nid)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-	hda_nid_t conn_list[HDA_MAX_CONNECTIONS];
-	int conn_len, curr;
-	int index;
-
-	if (!(get_wcaps(codec, pin_nid) & AC_WCAP_CONN_LIST)) {
-		snd_printk(KERN_WARNING
-			   "HDMI: pin %d wcaps %#x "
-			   "does not support connection list\n",
-			   pin_nid, get_wcaps(codec, pin_nid));
-		return -EINVAL;
-	}
-
-	conn_len = snd_hda_get_connections(codec, pin_nid, conn_list,
-					   HDA_MAX_CONNECTIONS);
-	if (conn_len > 1)
-		curr = snd_hda_codec_read(codec, pin_nid, 0,
-					  AC_VERB_GET_CONNECT_SEL, 0);
-	else
-		curr = 0;
-
-	index = hda_node_index(spec->pin, pin_nid);
-	if (index < 0)
-		return -EINVAL;
-
-	spec->pin_cvt[index] = conn_list[curr];
-
-	return 0;
-}
-
-static void hdmi_get_show_eld(struct hda_codec *codec, hda_nid_t pin_nid,
-			      struct hdmi_eld *eld)
-{
-	if (!snd_hdmi_get_eld(eld, codec, pin_nid))
-		snd_hdmi_show_eld(eld);
-}
-
-static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
-			       struct hdmi_eld *eld)
-{
-	int present = snd_hda_pin_sense(codec, pin_nid);
-
-	eld->monitor_present	= !!(present & AC_PINSENSE_PRESENCE);
-	eld->eld_valid		= !!(present & AC_PINSENSE_ELDV);
-
-	if (present & AC_PINSENSE_ELDV)
-		hdmi_get_show_eld(codec, pin_nid, eld);
-}
-
-static int intel_hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-
-	if (spec->num_pins >= INTEL_HDMI_PINS) {
-		snd_printk(KERN_WARNING
-			   "HDMI: no space for pin %d \n", pin_nid);
-		return -EINVAL;
-	}
-
-	hdmi_present_sense(codec, pin_nid, &spec->sink_eld[spec->num_pins]);
-
-	spec->pin[spec->num_pins] = pin_nid;
-	spec->num_pins++;
-
-	/*
-	 * It is assumed that converter nodes come first in the node list and
-	 * hence have been registered and usable now.
-	 */
-	return intel_hdmi_read_pin_conn(codec, pin_nid);
-}
-
-static int intel_hdmi_add_cvt(struct hda_codec *codec, hda_nid_t nid)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-
-	if (spec->num_cvts >= INTEL_HDMI_CVTS) {
-		snd_printk(KERN_WARNING
-			   "HDMI: no space for converter %d \n", nid);
-		return -EINVAL;
-	}
-
-	spec->cvt[spec->num_cvts] = nid;
-	spec->num_cvts++;
-
-	return 0;
-}
-
-static int intel_hdmi_parse_codec(struct hda_codec *codec)
-{
-	hda_nid_t nid;
-	int i, nodes;
-
-	nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid);
-	if (!nid || nodes < 0) {
-		snd_printk(KERN_WARNING "HDMI: failed to get afg sub nodes\n");
-		return -EINVAL;
-	}
-
-	for (i = 0; i < nodes; i++, nid++) {
-		unsigned int caps;
-		unsigned int type;
-
-		caps = snd_hda_param_read(codec, nid, AC_PAR_AUDIO_WIDGET_CAP);
-		type = get_wcaps_type(caps);
-
-		if (!(caps & AC_WCAP_DIGITAL))
-			continue;
-
-		switch (type) {
-		case AC_WID_AUD_OUT:
-			if (intel_hdmi_add_cvt(codec, nid) < 0)
-				return -EINVAL;
-			break;
-		case AC_WID_PIN:
-			caps = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
-			if (!(caps & (AC_PINCAP_HDMI | AC_PINCAP_DP)))
-				continue;
-			if (intel_hdmi_add_pin(codec, nid) < 0)
-				return -EINVAL;
-			break;
-		}
-	}
-
-	/*
-	 * G45/IbexPeak don't support EPSS: the unsolicited pin hot plug event
-	 * can be lost and presence sense verb will become inaccurate if the
-	 * HDA link is powered off at hot plug or hw initialization time.
-	 */
-#ifdef CONFIG_SND_HDA_POWER_SAVE
-	if (!(snd_hda_param_read(codec, codec->afg, AC_PAR_POWER_STATE) &
-	      AC_PWRST_EPSS))
-		codec->bus->power_keep_link_on = 1;
-#endif
-
-	return 0;
-}
-
-/*
- * HDMI routines
- */
-
-#ifdef BE_PARANOID
-static void hdmi_get_dip_index(struct hda_codec *codec, hda_nid_t pin_nid,
-				int *packet_index, int *byte_index)
-{
-	int val;
-
-	val = snd_hda_codec_read(codec, pin_nid, 0,
-				 AC_VERB_GET_HDMI_DIP_INDEX, 0);
-
-	*packet_index = val >> 5;
-	*byte_index = val & 0x1f;
-}
-#endif
-
-static void hdmi_set_dip_index(struct hda_codec *codec, hda_nid_t pin_nid,
-				int packet_index, int byte_index)
-{
-	int val;
-
-	val = (packet_index << 5) | (byte_index & 0x1f);
-
-	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_INDEX, val);
-}
-
-static void hdmi_write_dip_byte(struct hda_codec *codec, hda_nid_t pin_nid,
-				unsigned char val)
-{
-	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_DATA, val);
-}
-
-static void hdmi_enable_output(struct hda_codec *codec, hda_nid_t pin_nid)
-{
-	/* Unmute */
-	if (get_wcaps(codec, pin_nid) & AC_WCAP_OUT_AMP)
-		snd_hda_codec_write(codec, pin_nid, 0,
-				AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
-	/* Enable pin out */
-	snd_hda_codec_write(codec, pin_nid, 0,
-			    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
-}
-
-/*
- * Enable Audio InfoFrame Transmission
- */
-static void hdmi_start_infoframe_trans(struct hda_codec *codec,
-				       hda_nid_t pin_nid)
-{
-	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
-	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
-						AC_DIPXMIT_BEST);
-}
-
-/*
- * Disable Audio InfoFrame Transmission
- */
-static void hdmi_stop_infoframe_trans(struct hda_codec *codec,
-				      hda_nid_t pin_nid)
-{
-	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
-	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
-						AC_DIPXMIT_DISABLE);
-}
-
-static int hdmi_get_channel_count(struct hda_codec *codec, hda_nid_t nid)
-{
-	return 1 + snd_hda_codec_read(codec, nid, 0,
-					AC_VERB_GET_CVT_CHAN_COUNT, 0);
-}
-
-static void hdmi_set_channel_count(struct hda_codec *codec,
-				   hda_nid_t nid, int chs)
-{
-	if (chs != hdmi_get_channel_count(codec, nid))
-		snd_hda_codec_write(codec, nid, 0,
-				    AC_VERB_SET_CVT_CHAN_COUNT, chs - 1);
-}
-
-static void hdmi_debug_channel_mapping(struct hda_codec *codec,
-				       hda_nid_t pin_nid)
-{
-#ifdef CONFIG_SND_DEBUG_VERBOSE
-	int i;
-	int slot;
-
-	for (i = 0; i < 8; i++) {
-		slot = snd_hda_codec_read(codec, pin_nid, 0,
-						AC_VERB_GET_HDMI_CHAN_SLOT, i);
-		printk(KERN_DEBUG "HDMI: ASP channel %d => slot %d\n",
-						slot >> 4, slot & 0xf);
-	}
-#endif
-}
-
-
-/*
- * Audio InfoFrame routines
- */
-
-static void hdmi_debug_dip_size(struct hda_codec *codec, hda_nid_t pin_nid)
-{
-#ifdef CONFIG_SND_DEBUG_VERBOSE
-	int i;
-	int size;
-
-	size = snd_hdmi_get_eld_size(codec, pin_nid);
-	printk(KERN_DEBUG "HDMI: ELD buf size is %d\n", size);
-
-	for (i = 0; i < 8; i++) {
-		size = snd_hda_codec_read(codec, pin_nid, 0,
-						AC_VERB_GET_HDMI_DIP_SIZE, i);
-		printk(KERN_DEBUG "HDMI: DIP GP[%d] buf size is %d\n", i, size);
-	}
-#endif
-}
-
-static void hdmi_clear_dip_buffers(struct hda_codec *codec, hda_nid_t pin_nid)
-{
-#ifdef BE_PARANOID
-	int i, j;
-	int size;
-	int pi, bi;
-	for (i = 0; i < 8; i++) {
-		size = snd_hda_codec_read(codec, pin_nid, 0,
-						AC_VERB_GET_HDMI_DIP_SIZE, i);
-		if (size == 0)
-			continue;
-
-		hdmi_set_dip_index(codec, pin_nid, i, 0x0);
-		for (j = 1; j < 1000; j++) {
-			hdmi_write_dip_byte(codec, pin_nid, 0x0);
-			hdmi_get_dip_index(codec, pin_nid, &pi, &bi);
-			if (pi != i)
-				snd_printd(KERN_INFO "dip index %d: %d != %d\n",
-						bi, pi, i);
-			if (bi == 0) /* byte index wrapped around */
-				break;
-		}
-		snd_printd(KERN_INFO
-			"HDMI: DIP GP[%d] buf reported size=%d, written=%d\n",
-			i, size, j);
-	}
-#endif
-}
-
-static void hdmi_checksum_audio_infoframe(struct hdmi_audio_infoframe *ai)
-{
-	u8 *bytes = (u8 *)ai;
-	u8 sum = 0;
-	int i;
-
-	ai->checksum = 0;
-
-	for (i = 0; i < sizeof(*ai); i++)
-		sum += bytes[i];
-
-	ai->checksum = - sum;
-}
-
-static void hdmi_fill_audio_infoframe(struct hda_codec *codec,
-				      hda_nid_t pin_nid,
-				      struct hdmi_audio_infoframe *ai)
-{
-	u8 *bytes = (u8 *)ai;
-	int i;
-
-	hdmi_debug_dip_size(codec, pin_nid);
-	hdmi_clear_dip_buffers(codec, pin_nid); /* be paranoid */
-
-	hdmi_checksum_audio_infoframe(ai);
-
-	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
-	for (i = 0; i < sizeof(*ai); i++)
-		hdmi_write_dip_byte(codec, pin_nid, bytes[i]);
-}
-
-/*
- * Compute derived values in channel_allocations[].
- */
-static void init_channel_allocations(void)
-{
-	int i, j;
-	struct cea_channel_speaker_allocation *p;
-
-	for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
-		p = channel_allocations + i;
-		p->channels = 0;
-		p->spk_mask = 0;
-		for (j = 0; j < ARRAY_SIZE(p->speakers); j++)
-			if (p->speakers[j]) {
-				p->channels++;
-				p->spk_mask |= p->speakers[j];
-			}
-	}
-}
-
-/*
- * The transformation takes two steps:
- *
- * 	eld->spk_alloc => (eld_speaker_allocation_bits[]) => spk_mask
- * 	      spk_mask => (channel_allocations[])         => ai->CA
- *
- * TODO: it could select the wrong CA from multiple candidates.
-*/
-static int hdmi_setup_channel_allocation(struct hda_codec *codec, hda_nid_t nid,
-					 struct hdmi_audio_infoframe *ai)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-	struct hdmi_eld *eld;
-	int i;
-	int spk_mask = 0;
-	int channels = 1 + (ai->CC02_CT47 & 0x7);
-	char buf[SND_PRINT_CHANNEL_ALLOCATION_ADVISED_BUFSIZE];
-
-	/*
-	 * CA defaults to 0 for basic stereo audio
-	 */
-	if (channels <= 2)
-		return 0;
-
-	i = hda_node_index(spec->pin_cvt, nid);
-	if (i < 0)
-		return 0;
-	eld = &spec->sink_eld[i];
-
-	/*
-	 * HDMI sink's ELD info cannot always be retrieved for now, e.g.
-	 * in console or for audio devices. Assume the highest speakers
-	 * configuration, to _not_ prohibit multi-channel audio playback.
-	 */
-	if (!eld->spk_alloc)
-		eld->spk_alloc = 0xffff;
-
-	/*
-	 * expand ELD's speaker allocation mask
-	 *
-	 * ELD tells the speaker mask in a compact(paired) form,
-	 * expand ELD's notions to match the ones used by Audio InfoFrame.
-	 */
-	for (i = 0; i < ARRAY_SIZE(eld_speaker_allocation_bits); i++) {
-		if (eld->spk_alloc & (1 << i))
-			spk_mask |= eld_speaker_allocation_bits[i];
-	}
-
-	/* search for the first working match in the CA table */
-	for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
-		if (channels == channel_allocations[i].channels &&
-		    (spk_mask & channel_allocations[i].spk_mask) ==
-				channel_allocations[i].spk_mask) {
-			ai->CA = channel_allocations[i].ca_index;
-			break;
-		}
-	}
-
-	snd_print_channel_allocation(eld->spk_alloc, buf, sizeof(buf));
-	snd_printdd(KERN_INFO
-			"HDMI: select CA 0x%x for %d-channel allocation: %s\n",
-			ai->CA, channels, buf);
-
-	return ai->CA;
-}
-
-static void hdmi_setup_channel_mapping(struct hda_codec *codec,
-				       hda_nid_t pin_nid,
-				       struct hdmi_audio_infoframe *ai)
-{
-	int i;
-	int ca = ai->CA;
-	int err;
-
-	if (hdmi_channel_mapping[ca][1] == 0) {
-		for (i = 0; i < channel_allocations[ca].channels; i++)
-			hdmi_channel_mapping[ca][i] = i | (i << 4);
-		for (; i < 8; i++)
-			hdmi_channel_mapping[ca][i] = 0xf | (i << 4);
-	}
-
-	for (i = 0; i < 8; i++) {
-		err = snd_hda_codec_write(codec, pin_nid, 0,
-					  AC_VERB_SET_HDMI_CHAN_SLOT,
-					  hdmi_channel_mapping[ca][i]);
-		if (err) {
-			snd_printdd(KERN_INFO "HDMI: channel mapping failed\n");
-			break;
-		}
-	}
-
-	hdmi_debug_channel_mapping(codec, pin_nid);
-}
-
-static bool hdmi_infoframe_uptodate(struct hda_codec *codec, hda_nid_t pin_nid,
-				    struct hdmi_audio_infoframe *ai)
-{
-	u8 *bytes = (u8 *)ai;
-	u8 val;
-	int i;
-
-	if (snd_hda_codec_read(codec, pin_nid, 0, AC_VERB_GET_HDMI_DIP_XMIT, 0)
-							    != AC_DIPXMIT_BEST)
-		return false;
-
-	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
-	for (i = 0; i < sizeof(*ai); i++) {
-		val = snd_hda_codec_read(codec, pin_nid, 0,
-					 AC_VERB_GET_HDMI_DIP_DATA, 0);
-		if (val != bytes[i])
-			return false;
-	}
-
-	return true;
-}
-
-static void hdmi_setup_audio_infoframe(struct hda_codec *codec, hda_nid_t nid,
-					struct snd_pcm_substream *substream)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-	hda_nid_t pin_nid;
-	int i;
-	struct hdmi_audio_infoframe ai = {
-		.type		= 0x84,
-		.ver		= 0x01,
-		.len		= 0x0a,
-		.CC02_CT47	= substream->runtime->channels - 1,
-	};
-
-	hdmi_setup_channel_allocation(codec, nid, &ai);
-
-	for (i = 0; i < spec->num_pins; i++) {
-		if (spec->pin_cvt[i] != nid)
-			continue;
-		if (!spec->sink_eld[i].monitor_present)
-			continue;
-
-		pin_nid = spec->pin[i];
-		if (!hdmi_infoframe_uptodate(codec, pin_nid, &ai)) {
-			hdmi_setup_channel_mapping(codec, pin_nid, &ai);
-			hdmi_stop_infoframe_trans(codec, pin_nid);
-			hdmi_fill_audio_infoframe(codec, pin_nid, &ai);
-			hdmi_start_infoframe_trans(codec, pin_nid);
-		}
-	}
-}
-
-
-/*
- * Unsolicited events
- */
-
-static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
-	int pind = !!(res & AC_UNSOL_RES_PD);
-	int eldv = !!(res & AC_UNSOL_RES_ELDV);
-	int index;
-
-	printk(KERN_INFO
-		"HDMI hot plug event: Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
-		tag, pind, eldv);
-
-	index = hda_node_index(spec->pin, tag);
-	if (index < 0)
-		return;
-
-	spec->sink_eld[index].monitor_present = pind;
-	spec->sink_eld[index].eld_valid = eldv;
-
-	if (pind && eldv) {
-		hdmi_get_show_eld(codec, spec->pin[index], &spec->sink_eld[index]);
-		/* TODO: do real things about ELD */
-	}
-}
-
-static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res)
-{
-	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
-	int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
-	int cp_state = !!(res & AC_UNSOL_RES_CP_STATE);
-	int cp_ready = !!(res & AC_UNSOL_RES_CP_READY);
-
-	printk(KERN_INFO
-		"HDMI CP event: PIN=%d SUBTAG=0x%x CP_STATE=%d CP_READY=%d\n",
-		tag,
-		subtag,
-		cp_state,
-		cp_ready);
-
-	/* TODO */
-	if (cp_state)
-		;
-	if (cp_ready)
-		;
-}
-
-
-static void intel_hdmi_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
-	int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
-
-	if (hda_node_index(spec->pin, tag) < 0) {
-		snd_printd(KERN_INFO "Unexpected HDMI event tag 0x%x\n", tag);
-		return;
-	}
-
-	if (subtag == 0)
-		hdmi_intrinsic_event(codec, res);
-	else
-		hdmi_non_intrinsic_event(codec, res);
-}
-
-/*
- * Callbacks
- */
-
-static void hdmi_setup_stream(struct hda_codec *codec, hda_nid_t nid,
-			      u32 stream_tag, int format)
-{
-	int tag;
-	int fmt;
-
-	tag = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONV, 0) >> 4;
-	fmt = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_STREAM_FORMAT, 0);
-
-	snd_printdd("hdmi_setup_stream: "
-		    "NID=0x%x, %sstream=0x%x, %sformat=0x%x\n",
-		    nid,
-		    tag == stream_tag ? "" : "new-",
-		    stream_tag,
-		    fmt == format ? "" : "new-",
-		    format);
-
-	if (tag != stream_tag)
-		snd_hda_codec_write(codec, nid, 0,
-				    AC_VERB_SET_CHANNEL_STREAMID, stream_tag << 4);
-	if (fmt != format)
-		snd_hda_codec_write(codec, nid, 0,
-				    AC_VERB_SET_STREAM_FORMAT, format);
-}
 
 static int intel_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 					   struct hda_codec *codec,
@@ -882,7 +87,7 @@
 
 static int intel_hdmi_build_pcms(struct hda_codec *codec)
 {
-	struct intel_hdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	struct hda_pcm *info = spec->pcm_rec;
 	int i;
 
@@ -908,7 +113,7 @@
 
 static int intel_hdmi_build_controls(struct hda_codec *codec)
 {
-	struct intel_hdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	int err;
 	int i;
 
@@ -923,7 +128,7 @@
 
 static int intel_hdmi_init(struct hda_codec *codec)
 {
-	struct intel_hdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	int i;
 
 	for (i = 0; spec->pin[i]; i++) {
@@ -937,7 +142,7 @@
 
 static void intel_hdmi_free(struct hda_codec *codec)
 {
-	struct intel_hdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	int i;
 
 	for (i = 0; i < spec->num_pins; i++)
@@ -951,12 +156,12 @@
 	.free			= intel_hdmi_free,
 	.build_pcms		= intel_hdmi_build_pcms,
 	.build_controls 	= intel_hdmi_build_controls,
-	.unsol_event		= intel_hdmi_unsol_event,
+	.unsol_event		= hdmi_unsol_event,
 };
 
 static int patch_intel_hdmi(struct hda_codec *codec)
 {
-	struct intel_hdmi_spec *spec;
+	struct hdmi_spec *spec;
 	int i;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
@@ -964,7 +169,7 @@
 		return -ENOMEM;
 
 	codec->spec = spec;
-	if (intel_hdmi_parse_codec(codec) < 0) {
+	if (hdmi_parse_codec(codec) < 0) {
 		codec->spec = NULL;
 		kfree(spec);
 		return -EINVAL;
diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index 6afdab0..70669a2 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -29,13 +29,23 @@
 #include "hda_codec.h"
 #include "hda_local.h"
 
+#define MAX_HDMI_CVTS	1
+#define MAX_HDMI_PINS	1
+
+#include "patch_hdmi.c"
+
+static char *nvhdmi_pcm_names[MAX_HDMI_CVTS] = {
+	"NVIDIA HDMI",
+};
+
 /* define below to restrict the supported rates and formats */
 /* #define LIMITED_RATE_FMT_SUPPORT */
 
-struct nvhdmi_spec {
-	struct hda_multi_out multiout;
-
-	struct hda_pcm pcm_rec;
+enum HDACodec {
+	HDA_CODEC_NVIDIA_MCP7X,
+	HDA_CODEC_NVIDIA_MCP89,
+	HDA_CODEC_NVIDIA_GT21X,
+	HDA_CODEC_INVALID
 };
 
 #define Nv_VERB_SET_Channel_Allocation          0xF79
@@ -43,15 +53,18 @@
 #define Nv_VERB_SET_Audio_Protection_On         0xF98
 #define Nv_VERB_SET_Audio_Protection_Off        0xF99
 
-#define Nv_Master_Convert_nid   0x04
-#define Nv_Master_Pin_nid       0x05
+#define nvhdmi_master_con_nid_7x	0x04
+#define nvhdmi_master_pin_nid_7x	0x05
 
-static hda_nid_t nvhdmi_convert_nids[4] = {
+#define nvhdmi_master_con_nid_89	0x04
+#define nvhdmi_master_pin_nid_89	0x05
+
+static hda_nid_t nvhdmi_con_nids_7x[4] = {
 	/*front, rear, clfe, rear_surr */
 	0x6, 0x8, 0xa, 0xc,
 };
 
-static struct hda_verb nvhdmi_basic_init[] = {
+static struct hda_verb nvhdmi_basic_init_7x[] = {
 	/* set audio protect on */
 	{ 0x1, Nv_VERB_SET_Audio_Protection_On, 0x1},
 	/* enable digital output on pin widget */
@@ -84,22 +97,60 @@
  */
 static int nvhdmi_build_controls(struct hda_codec *codec)
 {
-	struct nvhdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	int err;
+	int i;
 
-	err = snd_hda_create_spdif_out_ctls(codec, spec->multiout.dig_out_nid);
-	if (err < 0)
-		return err;
+	if ((spec->codec_type == HDA_CODEC_NVIDIA_MCP89)
+	|| (spec->codec_type == HDA_CODEC_NVIDIA_GT21X)) {
+		for (i = 0; i < codec->num_pcms; i++) {
+			err = snd_hda_create_spdif_out_ctls(codec,
+							    spec->cvt[i]);
+			if (err < 0)
+				return err;
+		}
+	} else {
+		err = snd_hda_create_spdif_out_ctls(codec,
+						    spec->multiout.dig_out_nid);
+		if (err < 0)
+			return err;
+	}
 
 	return 0;
 }
 
 static int nvhdmi_init(struct hda_codec *codec)
 {
-	snd_hda_sequence_write(codec, nvhdmi_basic_init);
+	struct hdmi_spec *spec = codec->spec;
+	int i;
+	if ((spec->codec_type == HDA_CODEC_NVIDIA_MCP89)
+	|| (spec->codec_type == HDA_CODEC_NVIDIA_GT21X)) {
+		for (i = 0; spec->pin[i]; i++) {
+			hdmi_enable_output(codec, spec->pin[i]);
+			snd_hda_codec_write(codec, spec->pin[i], 0,
+					    AC_VERB_SET_UNSOLICITED_ENABLE,
+					    AC_USRSP_EN | spec->pin[i]);
+		}
+	} else {
+		snd_hda_sequence_write(codec, nvhdmi_basic_init_7x);
+	}
 	return 0;
 }
 
+static void nvhdmi_free(struct hda_codec *codec)
+{
+	struct hdmi_spec *spec = codec->spec;
+	int i;
+
+	if ((spec->codec_type == HDA_CODEC_NVIDIA_MCP89)
+	|| (spec->codec_type == HDA_CODEC_NVIDIA_GT21X)) {
+		for (i = 0; i < spec->num_pins; i++)
+			snd_hda_eld_proc_free(codec, &spec->sink_eld[i]);
+	}
+
+	kfree(spec);
+}
+
 /*
  * Digital out
  */
@@ -107,25 +158,25 @@
 					struct hda_codec *codec,
 					struct snd_pcm_substream *substream)
 {
-	struct nvhdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	return snd_hda_multi_out_dig_open(codec, &spec->multiout);
 }
 
-static int nvhdmi_dig_playback_pcm_close_8ch(struct hda_pcm_stream *hinfo,
+static int nvhdmi_dig_playback_pcm_close_8ch_7x(struct hda_pcm_stream *hinfo,
 					struct hda_codec *codec,
 					struct snd_pcm_substream *substream)
 {
-	struct nvhdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	int i;
 
-	snd_hda_codec_write(codec, Nv_Master_Convert_nid,
+	snd_hda_codec_write(codec, nvhdmi_master_con_nid_7x,
 			0, AC_VERB_SET_CHANNEL_STREAMID, 0);
 	for (i = 0; i < 4; i++) {
 		/* set the stream id */
-		snd_hda_codec_write(codec, nvhdmi_convert_nids[i], 0,
+		snd_hda_codec_write(codec, nvhdmi_con_nids_7x[i], 0,
 				AC_VERB_SET_CHANNEL_STREAMID, 0);
 		/* set the stream format */
-		snd_hda_codec_write(codec, nvhdmi_convert_nids[i], 0,
+		snd_hda_codec_write(codec, nvhdmi_con_nids_7x[i], 0,
 				AC_VERB_SET_STREAM_FORMAT, 0);
 	}
 
@@ -136,10 +187,25 @@
 					struct hda_codec *codec,
 					struct snd_pcm_substream *substream)
 {
-	struct nvhdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
 }
 
+static int nvhdmi_dig_playback_pcm_prepare_8ch_89(struct hda_pcm_stream *hinfo,
+					struct hda_codec *codec,
+					unsigned int stream_tag,
+					unsigned int format,
+					struct snd_pcm_substream *substream)
+{
+	hdmi_set_channel_count(codec, hinfo->nid,
+			       substream->runtime->channels);
+
+	hdmi_setup_audio_infoframe(codec, hinfo->nid, substream);
+
+	hdmi_setup_stream(codec, hinfo->nid, stream_tag, format);
+	return 0;
+}
+
 static int nvhdmi_dig_playback_pcm_prepare_8ch(struct hda_pcm_stream *hinfo,
 					struct hda_codec *codec,
 					unsigned int stream_tag,
@@ -181,29 +247,29 @@
 	/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
 	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
 		snd_hda_codec_write(codec,
-				Nv_Master_Convert_nid,
+				nvhdmi_master_con_nid_7x,
 				0,
 				AC_VERB_SET_DIGI_CONVERT_1,
 				codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
 
 	/* set the stream id */
-	snd_hda_codec_write(codec, Nv_Master_Convert_nid, 0,
+	snd_hda_codec_write(codec, nvhdmi_master_con_nid_7x, 0,
 			AC_VERB_SET_CHANNEL_STREAMID, (stream_tag << 4) | 0x0);
 
 	/* set the stream format */
-	snd_hda_codec_write(codec, Nv_Master_Convert_nid, 0,
+	snd_hda_codec_write(codec, nvhdmi_master_con_nid_7x, 0,
 			AC_VERB_SET_STREAM_FORMAT, format);
 
 	/* turn on again (if needed) */
 	/* enable and set the channel status audio/data flag */
 	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE)) {
 		snd_hda_codec_write(codec,
-				Nv_Master_Convert_nid,
+				nvhdmi_master_con_nid_7x,
 				0,
 				AC_VERB_SET_DIGI_CONVERT_1,
 				codec->spdif_ctls & 0xff);
 		snd_hda_codec_write(codec,
-				Nv_Master_Convert_nid,
+				nvhdmi_master_con_nid_7x,
 				0,
 				AC_VERB_SET_DIGI_CONVERT_2, dataDCC2);
 	}
@@ -220,19 +286,19 @@
 		if (codec->spdif_status_reset &&
 		(codec->spdif_ctls & AC_DIG1_ENABLE))
 			snd_hda_codec_write(codec,
-				nvhdmi_convert_nids[i],
+				nvhdmi_con_nids_7x[i],
 				0,
 				AC_VERB_SET_DIGI_CONVERT_1,
 				codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
 		/* set the stream id */
 		snd_hda_codec_write(codec,
-				nvhdmi_convert_nids[i],
+				nvhdmi_con_nids_7x[i],
 				0,
 				AC_VERB_SET_CHANNEL_STREAMID,
 				(stream_tag << 4) | channel_id);
 		/* set the stream format */
 		snd_hda_codec_write(codec,
-				nvhdmi_convert_nids[i],
+				nvhdmi_con_nids_7x[i],
 				0,
 				AC_VERB_SET_STREAM_FORMAT,
 				format);
@@ -241,12 +307,12 @@
 		if (codec->spdif_status_reset &&
 		(codec->spdif_ctls & AC_DIG1_ENABLE)) {
 			snd_hda_codec_write(codec,
-					nvhdmi_convert_nids[i],
+					nvhdmi_con_nids_7x[i],
 					0,
 					AC_VERB_SET_DIGI_CONVERT_1,
 					codec->spdif_ctls & 0xff);
 			snd_hda_codec_write(codec,
-					nvhdmi_convert_nids[i],
+					nvhdmi_con_nids_7x[i],
 					0,
 					AC_VERB_SET_DIGI_CONVERT_2, dataDCC2);
 		}
@@ -261,28 +327,47 @@
 	return 0;
 }
 
+static int nvhdmi_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+					   struct hda_codec *codec,
+					   struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
 static int nvhdmi_dig_playback_pcm_prepare_2ch(struct hda_pcm_stream *hinfo,
 					struct hda_codec *codec,
 					unsigned int stream_tag,
 					unsigned int format,
 					struct snd_pcm_substream *substream)
 {
-	struct nvhdmi_spec *spec = codec->spec;
+	struct hdmi_spec *spec = codec->spec;
 	return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
 					format, substream);
 }
 
-static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch = {
+static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch_89 = {
+	.substreams = 1,
+	.channels_min = 2,
+	.rates = SUPPORTED_RATES,
+	.maxbps = SUPPORTED_MAXBPS,
+	.formats = SUPPORTED_FORMATS,
+	.ops = {
+		.prepare = nvhdmi_dig_playback_pcm_prepare_8ch_89,
+		.cleanup = nvhdmi_playback_pcm_cleanup,
+	},
+};
+
+static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch_7x = {
 	.substreams = 1,
 	.channels_min = 2,
 	.channels_max = 8,
-	.nid = Nv_Master_Convert_nid,
+	.nid = nvhdmi_master_con_nid_7x,
 	.rates = SUPPORTED_RATES,
 	.maxbps = SUPPORTED_MAXBPS,
 	.formats = SUPPORTED_FORMATS,
 	.ops = {
 		.open = nvhdmi_dig_playback_pcm_open,
-		.close = nvhdmi_dig_playback_pcm_close_8ch,
+		.close = nvhdmi_dig_playback_pcm_close_8ch_7x,
 		.prepare = nvhdmi_dig_playback_pcm_prepare_8ch
 	},
 };
@@ -291,7 +376,7 @@
 	.substreams = 1,
 	.channels_min = 2,
 	.channels_max = 2,
-	.nid = Nv_Master_Convert_nid,
+	.nid = nvhdmi_master_con_nid_7x,
 	.rates = SUPPORTED_RATES,
 	.maxbps = SUPPORTED_MAXBPS,
 	.formats = SUPPORTED_FORMATS,
@@ -302,10 +387,36 @@
 	},
 };
 
-static int nvhdmi_build_pcms_8ch(struct hda_codec *codec)
+static int nvhdmi_build_pcms_8ch_89(struct hda_codec *codec)
 {
-	struct nvhdmi_spec *spec = codec->spec;
-	struct hda_pcm *info = &spec->pcm_rec;
+	struct hdmi_spec *spec = codec->spec;
+	struct hda_pcm *info = spec->pcm_rec;
+	int i;
+
+	codec->num_pcms = spec->num_cvts;
+	codec->pcm_info = info;
+
+	for (i = 0; i < codec->num_pcms; i++, info++) {
+		unsigned int chans;
+
+		chans = get_wcaps(codec, spec->cvt[i]);
+		chans = get_wcaps_channels(chans);
+
+		info->name = nvhdmi_pcm_names[i];
+		info->pcm_type = HDA_PCM_TYPE_HDMI;
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK]
+					= nvhdmi_pcm_digital_playback_8ch_89;
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->cvt[i];
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = chans;
+	}
+
+	return 0;
+}
+
+static int nvhdmi_build_pcms_8ch_7x(struct hda_codec *codec)
+{
+	struct hdmi_spec *spec = codec->spec;
+	struct hda_pcm *info = spec->pcm_rec;
 
 	codec->num_pcms = 1;
 	codec->pcm_info = info;
@@ -313,15 +424,15 @@
 	info->name = "NVIDIA HDMI";
 	info->pcm_type = HDA_PCM_TYPE_HDMI;
 	info->stream[SNDRV_PCM_STREAM_PLAYBACK]
-					= nvhdmi_pcm_digital_playback_8ch;
+					= nvhdmi_pcm_digital_playback_8ch_7x;
 
 	return 0;
 }
 
 static int nvhdmi_build_pcms_2ch(struct hda_codec *codec)
 {
-	struct nvhdmi_spec *spec = codec->spec;
-	struct hda_pcm *info = &spec->pcm_rec;
+	struct hdmi_spec *spec = codec->spec;
+	struct hda_pcm *info = spec->pcm_rec;
 
 	codec->num_pcms = 1;
 	codec->pcm_info = info;
@@ -334,14 +445,17 @@
 	return 0;
 }
 
-static void nvhdmi_free(struct hda_codec *codec)
-{
-	kfree(codec->spec);
-}
-
-static struct hda_codec_ops nvhdmi_patch_ops_8ch = {
+static struct hda_codec_ops nvhdmi_patch_ops_8ch_89 = {
 	.build_controls = nvhdmi_build_controls,
-	.build_pcms = nvhdmi_build_pcms_8ch,
+	.build_pcms = nvhdmi_build_pcms_8ch_89,
+	.init = nvhdmi_init,
+	.free = nvhdmi_free,
+	.unsol_event = hdmi_unsol_event,
+};
+
+static struct hda_codec_ops nvhdmi_patch_ops_8ch_7x = {
+	.build_controls = nvhdmi_build_controls,
+	.build_pcms = nvhdmi_build_pcms_8ch_7x,
 	.init = nvhdmi_init,
 	.free = nvhdmi_free,
 };
@@ -353,9 +467,36 @@
 	.free = nvhdmi_free,
 };
 
-static int patch_nvhdmi_8ch(struct hda_codec *codec)
+static int patch_nvhdmi_8ch_89(struct hda_codec *codec)
 {
-	struct nvhdmi_spec *spec;
+	struct hdmi_spec *spec;
+	int i;
+
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (spec == NULL)
+		return -ENOMEM;
+
+	codec->spec = spec;
+	spec->codec_type = HDA_CODEC_NVIDIA_MCP89;
+
+	if (hdmi_parse_codec(codec) < 0) {
+		codec->spec = NULL;
+		kfree(spec);
+		return -EINVAL;
+	}
+	codec->patch_ops = nvhdmi_patch_ops_8ch_89;
+
+	for (i = 0; i < spec->num_pins; i++)
+		snd_hda_eld_proc_new(codec, &spec->sink_eld[i], i);
+
+	init_channel_allocations();
+
+	return 0;
+}
+
+static int patch_nvhdmi_8ch_7x(struct hda_codec *codec)
+{
+	struct hdmi_spec *spec;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -365,16 +506,17 @@
 
 	spec->multiout.num_dacs = 0;  /* no analog */
 	spec->multiout.max_channels = 8;
-	spec->multiout.dig_out_nid = Nv_Master_Convert_nid;
+	spec->multiout.dig_out_nid = nvhdmi_master_con_nid_7x;
+	spec->codec_type = HDA_CODEC_NVIDIA_MCP7X;
 
-	codec->patch_ops = nvhdmi_patch_ops_8ch;
+	codec->patch_ops = nvhdmi_patch_ops_8ch_7x;
 
 	return 0;
 }
 
 static int patch_nvhdmi_2ch(struct hda_codec *codec)
 {
-	struct nvhdmi_spec *spec;
+	struct hdmi_spec *spec;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -384,7 +526,8 @@
 
 	spec->multiout.num_dacs = 0;  /* no analog */
 	spec->multiout.max_channels = 2;
-	spec->multiout.dig_out_nid = Nv_Master_Convert_nid;
+	spec->multiout.dig_out_nid = nvhdmi_master_con_nid_7x;
+	spec->codec_type = HDA_CODEC_NVIDIA_MCP7X;
 
 	codec->patch_ops = nvhdmi_patch_ops_2ch;
 
@@ -395,13 +538,24 @@
  * patch entries
  */
 static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
-	{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
-	{ .id = 0x10de0003, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
-	{ .id = 0x10de0005, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
-	{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
-	{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch },
 	{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
 	{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch },
+	{ .id = 0x10de0002, .name = "MCP77/78 HDMI",
+	  .patch = patch_nvhdmi_8ch_7x },
+	{ .id = 0x10de0003, .name = "MCP77/78 HDMI",
+	  .patch = patch_nvhdmi_8ch_7x },
+	{ .id = 0x10de0005, .name = "MCP77/78 HDMI",
+	  .patch = patch_nvhdmi_8ch_7x },
+	{ .id = 0x10de0006, .name = "MCP77/78 HDMI",
+	  .patch = patch_nvhdmi_8ch_7x },
+	{ .id = 0x10de0007, .name = "MCP79/7A HDMI",
+	  .patch = patch_nvhdmi_8ch_7x },
+	{ .id = 0x10de000c, .name = "MCP89 HDMI",
+	  .patch = patch_nvhdmi_8ch_89 },
+	{ .id = 0x10de000b, .name = "GT21x HDMI",
+	  .patch = patch_nvhdmi_8ch_89 },
+	{ .id = 0x10de000d, .name = "GT240 HDMI",
+	  .patch = patch_nvhdmi_8ch_89 },
 	{} /* terminator */
 };
 
@@ -412,9 +566,12 @@
 MODULE_ALIAS("snd-hda-codec-id:10de0007");
 MODULE_ALIAS("snd-hda-codec-id:10de0067");
 MODULE_ALIAS("snd-hda-codec-id:10de8001");
+MODULE_ALIAS("snd-hda-codec-id:10de000c");
+MODULE_ALIAS("snd-hda-codec-id:10de000b");
+MODULE_ALIAS("snd-hda-codec-id:10de000d");
 
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Nvidia HDMI HD-audio codec");
+MODULE_DESCRIPTION("NVIDIA HDMI HD-audio codec");
 
 static struct hda_codec_preset_list nvhdmi_list = {
 	.preset = snd_hda_preset_nvhdmi,
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index e8cbe21..3a83719 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -411,6 +411,8 @@
 	unsigned int mux_idx = snd_ctl_get_ioffidx(kcontrol, &uinfo->id);
 	if (mux_idx >= spec->num_mux_defs)
 		mux_idx = 0;
+	if (!spec->input_mux[mux_idx].num_items && mux_idx > 0)
+		mux_idx = 0;
 	return snd_hda_input_mux_info(&spec->input_mux[mux_idx], uinfo);
 }
 
@@ -439,6 +441,8 @@
 
 	mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
 	imux = &spec->input_mux[mux_idx];
+	if (!imux->num_items && mux_idx > 0)
+		imux = &spec->input_mux[0];
 
 	type = get_wcaps_type(get_wcaps(codec, nid));
 	if (type == AC_WID_AUD_MIX) {
@@ -4915,7 +4919,7 @@
 static void fixup_single_adc(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	hda_nid_t pin;
+	hda_nid_t pin = 0;
 	int i;
 
 	/* search for the input pin; there must be only one */
@@ -10105,6 +10109,8 @@
 			continue;
 		mux_idx = c >= spec->num_mux_defs ? 0 : c;
 		imux = &spec->input_mux[mux_idx];
+		if (!imux->num_items && mux_idx > 0)
+			imux = &spec->input_mux[0];
 		for (idx = 0; idx < conns; idx++) {
 			/* if the current connection is the selected one,
 			 * unmute it as default - otherwise mute it
@@ -13201,7 +13207,7 @@
 
 	if (board_config < 0 || board_config >= ALC268_MODEL_LAST)
 		board_config = snd_hda_check_board_codec_sid_config(codec,
-			ALC882_MODEL_LAST, alc268_models, alc268_ssid_cfg_tbl);
+			ALC268_MODEL_LAST, alc268_models, alc268_ssid_cfg_tbl);
 
 	if (board_config < 0 || board_config >= ALC268_MODEL_LAST) {
 		printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
@@ -13561,6 +13567,8 @@
 static void alc269_quanta_fl1_setup(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
 	spec->ext_mic.pin = 0x18;
 	spec->ext_mic.mux_idx = 0;
 	spec->int_mic.pin = 0x19;
@@ -13656,6 +13664,8 @@
 static void alc269_laptop_dmic_setup(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
 	spec->ext_mic.pin = 0x18;
 	spec->ext_mic.mux_idx = 0;
 	spec->int_mic.pin = 0x12;
@@ -13666,6 +13676,8 @@
 static void alc269vb_laptop_dmic_setup(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
 	spec->ext_mic.pin = 0x18;
 	spec->ext_mic.mux_idx = 0;
 	spec->int_mic.pin = 0x12;
@@ -13676,6 +13688,8 @@
 static void alc269_laptop_amic_setup(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
 	spec->ext_mic.pin = 0x18;
 	spec->ext_mic.mux_idx = 0;
 	spec->int_mic.pin = 0x19;
diff --git a/sound/pci/oxygen/xonar_wm87x6.c b/sound/pci/oxygen/xonar_wm87x6.c
index 7754db1..dbc4b89 100644
--- a/sound/pci/oxygen/xonar_wm87x6.c
+++ b/sound/pci/oxygen/xonar_wm87x6.c
@@ -68,7 +68,7 @@
 			 OXYGEN_SPI_CEN_LATCH_CLOCK_LO,
 			 (reg << 9) | value);
 	if (reg < ARRAY_SIZE(data->wm8776_regs)) {
-		if (reg >= WM8776_HPLVOL || reg <= WM8776_DACMASTER)
+		if (reg >= WM8776_HPLVOL && reg <= WM8776_DACMASTER)
 			value &= ~WM8776_UPDATE;
 		data->wm8776_regs[reg] = value;
 	}
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 960a227..ad44626 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -1974,9 +1974,9 @@
 	}
 	snd_iprintf(buffer, "Paths:\n");
 	i = getpaths(cif, p);
-	while (i--) {
-		snd_iprintf(buffer, "%x->%x ", p[i - 1], p[i]);
-		i--;
+	while (i >= 2) {
+		i -= 2;
+		snd_iprintf(buffer, "%x->%x ", p[i], p[i + 1]);
 	}
 	snd_iprintf(buffer, "\n");
 }
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 3d72c1e..547b713 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -2479,7 +2479,7 @@
    on MADICARD 
   - playback mixer matrix: [channelout+64] [output] [value]
   - input(thru) mixer matrix: [channelin] [output] [value]
-  (better do 2 kontrols for seperation ?)
+  (better do 2 kontrols for separation ?)
 */
 
 #define HDSPM_MIXER(xname, xindex) \
diff --git a/sound/soc/codecs/ak4104.c b/sound/soc/codecs/ak4104.c
index b9ef7e4..b68d99f 100644
--- a/sound/soc/codecs/ak4104.c
+++ b/sound/soc/codecs/ak4104.c
@@ -90,12 +90,10 @@
 	if (reg >= codec->reg_cache_size)
 		return -EINVAL;
 
-	reg &= AK4104_REG_MASK;
-	reg |= AK4104_WRITE;
-
 	/* only write to the hardware if value has changed */
 	if (cache[reg] != value) {
-		u8 tmp[2] = { reg, value };
+		u8 tmp[2] = { (reg & AK4104_REG_MASK) | AK4104_WRITE, value };
+
 		if (spi_write(spi, tmp, sizeof(tmp))) {
 			dev_err(&spi->dev, "SPI write failed\n");
 			return -EIO;
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index a54dc77b..056b787 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -990,7 +990,7 @@
 		reg = snd_soc_read(codec, WM8990_CLOCKING_2);
 		snd_soc_write(codec, WM8990_CLOCKING_2, reg | WM8990_SYSCLK_SRC);
 
-		/* set up N , fractional mode and pre-divisor if neccessary */
+		/* set up N , fractional mode and pre-divisor if necessary */
 		snd_soc_write(codec, WM8990_PLL1, pll_div.n | WM8990_SDM |
 			(pll_div.div2?WM8990_PRESCALE:0));
 		snd_soc_write(codec, WM8990_PLL2, (u8)(pll_div.k>>8));
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index e69397f..9e95e51 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -42,11 +42,14 @@
  * SSP audio private data
  */
 struct ssp_priv {
-	struct ssp_dev dev;
+	struct ssp_device *ssp;
 	unsigned int sysclk;
 	int dai_fmt;
 #ifdef CONFIG_PM
-	struct ssp_state state;
+	uint32_t	cr0;
+	uint32_t	cr1;
+	uint32_t	to;
+	uint32_t	psp;
 #endif
 };
 
@@ -61,6 +64,22 @@
 		 ssp_read_reg(ssp, SSACD));
 }
 
+static void ssp_enable(struct ssp_device *ssp)
+{
+	uint32_t sscr0;
+
+	sscr0 = __raw_readl(ssp->mmio_base + SSCR0) | SSCR0_SSE;
+	__raw_writel(sscr0, ssp->mmio_base + SSCR0);
+}
+
+static void ssp_disable(struct ssp_device *ssp)
+{
+	uint32_t sscr0;
+
+	sscr0 = __raw_readl(ssp->mmio_base + SSCR0) & ~SSCR0_SSE;
+	__raw_writel(sscr0, ssp->mmio_base + SSCR0);
+}
+
 struct pxa2xx_pcm_dma_data {
 	struct pxa2xx_pcm_dma_params params;
 	char name[20];
@@ -94,13 +113,12 @@
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct ssp_priv *priv = cpu_dai->private_data;
+	struct ssp_device *ssp = priv->ssp;
 	int ret = 0;
 
 	if (!cpu_dai->active) {
-		priv->dev.port = cpu_dai->id + 1;
-		priv->dev.irq = NO_IRQ;
-		clk_enable(priv->dev.ssp->clk);
-		ssp_disable(&priv->dev);
+		clk_enable(ssp->clk);
+		ssp_disable(ssp);
 	}
 
 	if (cpu_dai->dma_data) {
@@ -116,10 +134,11 @@
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct ssp_priv *priv = cpu_dai->private_data;
+	struct ssp_device *ssp = priv->ssp;
 
 	if (!cpu_dai->active) {
-		ssp_disable(&priv->dev);
-		clk_disable(priv->dev.ssp->clk);
+		ssp_disable(ssp);
+		clk_disable(ssp->clk);
 	}
 
 	if (cpu_dai->dma_data) {
@@ -133,27 +152,39 @@
 static int pxa_ssp_suspend(struct snd_soc_dai *cpu_dai)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
+	struct ssp_device *ssp = priv->ssp;
 
 	if (!cpu_dai->active)
-		clk_enable(priv->dev.ssp->clk);
+		clk_enable(ssp->clk);
 
-	ssp_save_state(&priv->dev, &priv->state);
-	clk_disable(priv->dev.ssp->clk);
+	priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
+	priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
+	priv->to  = __raw_readl(ssp->mmio_base + SSTO);
+	priv->psp = __raw_readl(ssp->mmio_base + SSPSP);
 
+	ssp_disable(ssp);
+	clk_disable(ssp->clk);
 	return 0;
 }
 
 static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
+	struct ssp_device *ssp = priv->ssp;
+	uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
 
-	clk_enable(priv->dev.ssp->clk);
-	ssp_restore_state(&priv->dev, &priv->state);
+	clk_enable(ssp->clk);
+
+	__raw_writel(sssr, ssp->mmio_base + SSSR);
+	__raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
+	__raw_writel(priv->cr1, ssp->mmio_base + SSCR1);
+	__raw_writel(priv->to,  ssp->mmio_base + SSTO);
+	__raw_writel(priv->psp, ssp->mmio_base + SSPSP);
 
 	if (cpu_dai->active)
-		ssp_enable(&priv->dev);
+		ssp_enable(ssp);
 	else
-		clk_disable(priv->dev.ssp->clk);
+		clk_disable(ssp->clk);
 
 	return 0;
 }
@@ -203,7 +234,7 @@
 	int clk_id, unsigned int freq, int dir)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	int val;
 
 	u32 sscr0 = ssp_read_reg(ssp, SSCR0) &
@@ -244,11 +275,11 @@
 	/* The SSP clock must be disabled when changing SSP clock mode
 	 * on PXA2xx.  On PXA3xx it must be enabled when doing so. */
 	if (!cpu_is_pxa3xx())
-		clk_disable(priv->dev.ssp->clk);
+		clk_disable(ssp->clk);
 	val = ssp_read_reg(ssp, SSCR0) | sscr0;
 	ssp_write_reg(ssp, SSCR0, val);
 	if (!cpu_is_pxa3xx())
-		clk_enable(priv->dev.ssp->clk);
+		clk_enable(ssp->clk);
 
 	return 0;
 }
@@ -260,7 +291,7 @@
 	int div_id, int div)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	int val;
 
 	switch (div_id) {
@@ -311,7 +342,7 @@
 	int source, unsigned int freq_in, unsigned int freq_out)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	u32 ssacd = ssp_read_reg(ssp, SSACD) & ~0x70;
 
 #if defined(CONFIG_PXA3xx)
@@ -380,7 +411,7 @@
 	unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	u32 sscr0;
 
 	sscr0 = ssp_read_reg(ssp, SSCR0);
@@ -415,7 +446,7 @@
 	int tristate)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	u32 sscr1;
 
 	sscr1 = ssp_read_reg(ssp, SSCR1);
@@ -437,7 +468,7 @@
 		unsigned int fmt)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	u32 sscr0;
 	u32 sscr1;
 	u32 sspsp;
@@ -532,7 +563,7 @@
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	int chn = params_channels(params);
 	u32 sscr0;
 	u32 sspsp;
@@ -642,12 +673,12 @@
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	int ret = 0;
 	struct ssp_priv *priv = cpu_dai->private_data;
-	struct ssp_device *ssp = priv->dev.ssp;
+	struct ssp_device *ssp = priv->ssp;
 	int val;
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_RESUME:
-		ssp_enable(&priv->dev);
+		ssp_enable(ssp);
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		val = ssp_read_reg(ssp, SSCR1);
@@ -666,7 +697,7 @@
 		else
 			val |= SSCR1_RSRE;
 		ssp_write_reg(ssp, SSCR1, val);
-		ssp_enable(&priv->dev);
+		ssp_enable(ssp);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 		val = ssp_read_reg(ssp, SSCR1);
@@ -677,7 +708,7 @@
 		ssp_write_reg(ssp, SSCR1, val);
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
-		ssp_disable(&priv->dev);
+		ssp_disable(ssp);
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		val = ssp_read_reg(ssp, SSCR1);
@@ -707,8 +738,8 @@
 	if (!priv)
 		return -ENOMEM;
 
-	priv->dev.ssp = ssp_request(dai->id + 1, "SoC audio");
-	if (priv->dev.ssp == NULL) {
+	priv->ssp = ssp_request(dai->id + 1, "SoC audio");
+	if (priv->ssp == NULL) {
 		ret = -ENODEV;
 		goto err_priv;
 	}
@@ -727,7 +758,7 @@
 			      struct snd_soc_dai *dai)
 {
 	struct ssp_priv *priv = dai->private_data;
-	ssp_free(priv->dev.ssp);
+	ssp_free(priv->ssp);
 }
 
 #define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c
index 93ed3aa..a72c251 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.c
@@ -22,8 +22,8 @@
 #include <sound/soc.h>
 
 #include <plat/regs-s3c2412-iis.h>
-#include <plat/gpio-bank-d.h>
-#include <plat/gpio-bank-e.h>
+#include <mach/gpio-bank-d.h>
+#include <mach/gpio-bank-e.h>
 #include <plat/gpio-cfg.h>
 
 #include <mach/map.h>
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index a03bac9..c8b0556 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -427,24 +427,24 @@
 	if (!runtime->hw.rates) {
 		printk(KERN_ERR "asoc: %s <-> %s No matching rates\n",
 			codec_dai->name, cpu_dai->name);
-		goto machine_err;
+		goto config_err;
 	}
 	if (!runtime->hw.formats) {
 		printk(KERN_ERR "asoc: %s <-> %s No matching formats\n",
 			codec_dai->name, cpu_dai->name);
-		goto machine_err;
+		goto config_err;
 	}
 	if (!runtime->hw.channels_min || !runtime->hw.channels_max) {
 		printk(KERN_ERR "asoc: %s <-> %s No matching channels\n",
 			codec_dai->name, cpu_dai->name);
-		goto machine_err;
+		goto config_err;
 	}
 
 	/* Symmetry only applies if we've already got an active stream. */
 	if (cpu_dai->active || codec_dai->active) {
 		ret = soc_pcm_apply_symmetry(substream);
 		if (ret != 0)
-			goto machine_err;
+			goto config_err;
 	}
 
 	pr_debug("asoc: %s <-> %s info:\n", codec_dai->name, cpu_dai->name);
@@ -464,10 +464,14 @@
 	mutex_unlock(&pcm_mutex);
 	return 0;
 
-machine_err:
+config_err:
 	if (machine->ops && machine->ops->shutdown)
 		machine->ops->shutdown(substream);
 
+machine_err:
+	if (codec_dai->ops->shutdown)
+		codec_dai->ops->shutdown(substream, codec_dai);
+
 codec_dai_err:
 	if (platform->pcm_ops->close)
 		platform->pcm_ops->close(substream);
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 8c29258..c570ae3 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -22,13 +22,13 @@
 	  will be called snd-usb-audio.
 
 config SND_USB_UA101
-	tristate "Edirol UA-101 driver (EXPERIMENTAL)"
+	tristate "Edirol UA-101/UA-1000 driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select SND_PCM
 	select SND_RAWMIDI
 	help
-	  Say Y here to include support for the Edirol UA-101 audio/MIDI
-	  interface.
+	  Say Y here to include support for the Edirol UA-101 and UA-1000
+	  audio/MIDI interfaces.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-ua101.
diff --git a/sound/usb/caiaq/midi.h b/sound/usb/caiaq/midi.h
index 9d16db0..380f984 100644
--- a/sound/usb/caiaq/midi.h
+++ b/sound/usb/caiaq/midi.h
@@ -3,6 +3,6 @@
 
 int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *dev);
 void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, int port, const char *buf, int len);
-void snd_usb_caiaq_midi_output_done(struct urb* urb);
+void snd_usb_caiaq_midi_output_done(struct urb *urb);
 
 #endif /* CAIAQ_MIDI_H */
diff --git a/sound/usb/ua101.c b/sound/usb/ua101.c
index 4f4ccdf..3d458d3 100644
--- a/sound/usb/ua101.c
+++ b/sound/usb/ua101.c
@@ -1,5 +1,5 @@
 /*
- * Edirol UA-101 driver
+ * Edirol UA-101/UA-1000 driver
  * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
  *
  * This driver is free software: you can redistribute it and/or modify
@@ -25,13 +25,10 @@
 #include <sound/pcm_params.h>
 #include "usbaudio.h"
 
-MODULE_DESCRIPTION("Edirol UA-101 driver");
+MODULE_DESCRIPTION("Edirol UA-101/1000 driver");
 MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
 MODULE_LICENSE("GPL v2");
-MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101}}");
-
-/* I use my UA-1A for testing because I don't have a UA-101 ... */
-#define UA1A_HACK
+MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101},{Edirol,UA-1000}}");
 
 /*
  * Should not be lower than the minimum scheduling delay of the host
@@ -132,9 +129,6 @@
 			dma_addr_t dma;
 		} buffers[MAX_MEMORY_BUFFERS];
 	} capture, playback;
-
-	unsigned int fps[10];
-	unsigned int frame_counter;
 };
 
 static DEFINE_MUTEX(devices_mutex);
@@ -424,16 +418,6 @@
 	if (do_period_elapsed)
 		snd_pcm_period_elapsed(stream->substream);
 
-	/* for debugging: measure the sample rate relative to the USB clock */
-	ua->fps[ua->frame_counter++ / ua->packets_per_second] += frames;
-	if (ua->frame_counter >= ARRAY_SIZE(ua->fps) * ua->packets_per_second) {
-		printk(KERN_DEBUG "capture rate:");
-		for (frames = 0; frames < ARRAY_SIZE(ua->fps); ++frames)
-			printk(KERN_CONT " %u", ua->fps[frames]);
-		printk(KERN_CONT "\n");
-		memset(ua->fps, 0, sizeof(ua->fps));
-		ua->frame_counter = 0;
-	}
 	return;
 
 stream_stopped:
@@ -1200,13 +1184,30 @@
 		.type = QUIRK_MIDI_FIXED_ENDPOINT,
 		.data = &midi_ep
 	};
+	static const int intf_numbers[2][3] = {
+		{	/* UA-101 */
+			[INTF_PLAYBACK] = 0,
+			[INTF_CAPTURE] = 1,
+			[INTF_MIDI] = 2,
+		},
+		{	/* UA-1000 */
+			[INTF_CAPTURE] = 1,
+			[INTF_PLAYBACK] = 2,
+			[INTF_MIDI] = 3,
+		},
+	};
 	struct snd_card *card;
 	struct ua101 *ua;
 	unsigned int card_index, i;
+	int is_ua1000;
+	const char *name;
 	char usb_path[32];
 	int err;
 
-	if (interface->altsetting->desc.bInterfaceNumber != 0)
+	is_ua1000 = usb_id->idProduct == 0x0044;
+
+	if (interface->altsetting->desc.bInterfaceNumber !=
+	    intf_numbers[is_ua1000][0])
 		return -ENODEV;
 
 	mutex_lock(&devices_mutex);
@@ -1239,20 +1240,13 @@
 	init_waitqueue_head(&ua->rate_feedback_wait);
 	init_waitqueue_head(&ua->alsa_playback_wait);
 
-#ifdef UA1A_HACK
-	if (ua->dev->descriptor.idProduct == cpu_to_le16(0x0018)) {
-		ua->intf[2] = interface;
-		ua->intf[0] = usb_ifnum_to_if(ua->dev, 1);
-		ua->intf[1] = usb_ifnum_to_if(ua->dev, 2);
-		usb_driver_claim_interface(&ua101_driver, ua->intf[0], ua);
-		usb_driver_claim_interface(&ua101_driver, ua->intf[1], ua);
-	} else {
-#endif
 	ua->intf[0] = interface;
 	for (i = 1; i < ARRAY_SIZE(ua->intf); ++i) {
-		ua->intf[i] = usb_ifnum_to_if(ua->dev, i);
+		ua->intf[i] = usb_ifnum_to_if(ua->dev,
+					      intf_numbers[is_ua1000][i]);
 		if (!ua->intf[i]) {
-			dev_err(&ua->dev->dev, "interface %u not found\n", i);
+			dev_err(&ua->dev->dev, "interface %u not found\n",
+				intf_numbers[is_ua1000][i]);
 			err = -ENXIO;
 			goto probe_error;
 		}
@@ -1264,39 +1258,19 @@
 			goto probe_error;
 		}
 	}
-#ifdef UA1A_HACK
-	}
-#endif
 
 	snd_card_set_dev(card, &interface->dev);
 
-#ifdef UA1A_HACK
-	if (ua->dev->descriptor.idProduct == cpu_to_le16(0x0018)) {
-		ua->format_bit = SNDRV_PCM_FMTBIT_S16_LE;
-		ua->rate = 44100;
-		ua->packets_per_second = 1000;
-		ua->capture.channels = 2;
-		ua->playback.channels = 2;
-		ua->capture.frame_bytes = 4;
-		ua->playback.frame_bytes = 4;
-		ua->capture.usb_pipe = usb_rcvisocpipe(ua->dev, 2);
-		ua->playback.usb_pipe = usb_sndisocpipe(ua->dev, 1);
-		ua->capture.max_packet_bytes = 192;
-		ua->playback.max_packet_bytes = 192;
-	} else {
-#endif
 	err = detect_usb_format(ua);
 	if (err < 0)
 		goto probe_error;
-#ifdef UA1A_HACK
-	}
-#endif
 
+	name = usb_id->idProduct == 0x0044 ? "UA-1000" : "UA-101";
 	strcpy(card->driver, "UA-101");
-	strcpy(card->shortname, "UA-101");
+	strcpy(card->shortname, name);
 	usb_make_path(ua->dev, usb_path, sizeof(usb_path));
 	snprintf(ua->card->longname, sizeof(ua->card->longname),
-		 "EDIROL UA-101 (serial %s), %u Hz at %s, %s speed",
+		 "EDIROL %s (serial %s), %u Hz at %s, %s speed", name,
 		 ua->dev->serial ? ua->dev->serial : "?", ua->rate, usb_path,
 		 ua->dev->speed == USB_SPEED_HIGH ? "high" : "full");
 
@@ -1314,24 +1288,18 @@
 	if (err < 0)
 		goto probe_error;
 
-	err = snd_pcm_new(card, "UA-101", 0, 1, 1, &ua->pcm);
+	err = snd_pcm_new(card, name, 0, 1, 1, &ua->pcm);
 	if (err < 0)
 		goto probe_error;
 	ua->pcm->private_data = ua;
-	strcpy(ua->pcm->name, "UA-101");
+	strcpy(ua->pcm->name, name);
 	snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_PLAYBACK, &playback_pcm_ops);
 	snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_CAPTURE, &capture_pcm_ops);
 
-#ifdef UA1A_HACK
-	if (ua->dev->descriptor.idProduct != cpu_to_le16(0x0018)) {
-#endif
 	err = snd_usbmidi_create(card, ua->intf[INTF_MIDI],
 				 &ua->midi_list, &midi_quirk);
 	if (err < 0)
 		goto probe_error;
-#ifdef UA1A_HACK
-	}
-#endif
 
 	err = snd_card_register(card);
 	if (err < 0)
@@ -1386,11 +1354,9 @@
 }
 
 static struct usb_device_id ua101_ids[] = {
-#ifdef UA1A_HACK
-	{ USB_DEVICE(0x0582, 0x0018) },
-#endif
-	{ USB_DEVICE(0x0582, 0x007d) },
-	{ USB_DEVICE(0x0582, 0x008d) },
+	{ USB_DEVICE(0x0582, 0x0044) }, /* UA-1000 high speed */
+	{ USB_DEVICE(0x0582, 0x007d) }, /* UA-101 high speed */
+	{ USB_DEVICE(0x0582, 0x008d) }, /* UA-101 full speed */
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, ua101_ids);
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index c539f7f..11b0826 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -2483,7 +2483,6 @@
 				   sample_width, sample_bytes);
 		}
 		/* check the format byte size */
-		printk(" XXXXX SAMPLE BYTES %d\n", sample_bytes);
 		switch (sample_bytes) {
 		case 1:
 			pcm_format = SNDRV_PCM_FORMAT_S8;
@@ -2581,6 +2580,9 @@
 			     chip->usb_id == USB_ID(0x0d8c, 0x0102)) &&
 			    fp->altsetting == 5 && fp->maxpacksize == 392)
 				rate = 96000;
+			/* Creative VF0470 Live Cam reports 16 kHz instead of 8kHz */
+			if (rate == 16000 && chip->usb_id == USB_ID(0x041e, 0x4068))
+				rate = 8000;
 			fp->rate_table[fp->nr_rates] = rate;
 			if (!fp->rate_min || rate < fp->rate_min)
 				fp->rate_min = rate;
@@ -3386,58 +3388,6 @@
 	return 0;
 }
 
-/*
- * Create a stream for an Edirol UA-1000 interface.
- */
-static int create_ua1000_quirk(struct snd_usb_audio *chip,
-			       struct usb_interface *iface,
-			       const struct snd_usb_audio_quirk *quirk)
-{
-	static const struct audioformat ua1000_format = {
-		.format = SNDRV_PCM_FORMAT_S32_LE,
-		.fmt_type = UAC_FORMAT_TYPE_I,
-		.altsetting = 1,
-		.altset_idx = 1,
-		.attributes = 0,
-		.rates = SNDRV_PCM_RATE_CONTINUOUS,
-	};
-	struct usb_host_interface *alts;
-	struct usb_interface_descriptor *altsd;
-	struct audioformat *fp;
-	int stream, err;
-
-	if (iface->num_altsetting != 2)
-		return -ENXIO;
-	alts = &iface->altsetting[1];
-	altsd = get_iface_desc(alts);
-	if (alts->extralen != 11 || alts->extra[1] != USB_DT_CS_INTERFACE ||
-	    altsd->bNumEndpoints != 1)
-		return -ENXIO;
-
-	fp = kmemdup(&ua1000_format, sizeof(*fp), GFP_KERNEL);
-	if (!fp)
-		return -ENOMEM;
-
-	fp->channels = alts->extra[4];
-	fp->iface = altsd->bInterfaceNumber;
-	fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
-	fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
-	fp->datainterval = parse_datainterval(chip, alts);
-	fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
-	fp->rate_max = fp->rate_min = combine_triple(&alts->extra[8]);
-
-	stream = (fp->endpoint & USB_DIR_IN)
-		? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
-	err = add_audio_endpoint(chip, stream, fp);
-	if (err < 0) {
-		kfree(fp);
-		return err;
-	}
-	/* FIXME: playback must be synchronized to capture */
-	usb_set_interface(chip->dev, fp->iface, 0);
-	return 0;
-}
-
 static int snd_usb_create_quirk(struct snd_usb_audio *chip,
 				struct usb_interface *iface,
 				const struct snd_usb_audio_quirk *quirk);
@@ -3686,7 +3636,6 @@
 		[QUIRK_MIDI_CME] = create_any_midi_quirk,
 		[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
 		[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
-		[QUIRK_AUDIO_EDIROL_UA1000] = create_ua1000_quirk,
 		[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
 		[QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk
 	};
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 6b016d4..42c299c 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -75,7 +75,6 @@
 	QUIRK_MIDI_US122L,
 	QUIRK_AUDIO_STANDARD_INTERFACE,
 	QUIRK_AUDIO_FIXED_ENDPOINT,
-	QUIRK_AUDIO_EDIROL_UA1000,
 	QUIRK_AUDIO_EDIROL_UAXX,
 	QUIRK_AUDIO_ALIGN_TRANSFER,
 
@@ -112,7 +111,7 @@
 
 /* for QUIRK_AUDIO/MIDI_STANDARD_INTERFACE, data is NULL */
 
-/* for QUIRK_AUDIO_EDIROL_UA700_UA25/UA1000, data is NULL */
+/* for QUIRK_AUDIO_EDIROL_UAXX, data is NULL */
 
 /* for QUIRK_IGNORE_INTERFACE, data is NULL */
 
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index f06faf7..2b426c1 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -1016,36 +1016,6 @@
 	}
 },
 {
-	USB_DEVICE(0x0582, 0x0044),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
-		.vendor_name = "Roland",
-		.product_name = "UA-1000",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_EDIROL_UA1000
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_EDIROL_UA1000
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
-					.out_cables = 0x0003,
-					.in_cables  = 0x0003
-				}
-			},
-			{
-				.ifnum = -1
-			}
-		}
-	}
-},
-{
 	/* has ID 0x0049 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0047),
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
diff --git a/tools/perf/Documentation/perf-lock.txt b/tools/perf/Documentation/perf-lock.txt
new file mode 100644
index 0000000..b317102
--- /dev/null
+++ b/tools/perf/Documentation/perf-lock.txt
@@ -0,0 +1,29 @@
+perf-lock(1)
+============
+
+NAME
+----
+perf-lock - Analyze lock events
+
+SYNOPSIS
+--------
+[verse]
+'perf lock' {record|report|trace}
+
+DESCRIPTION
+-----------
+You can analyze various lock behaviours
+and statistics with this 'perf lock' command.
+
+  'perf lock record <command>' records lock events
+  between start and end <command>. And this command
+  produces the file "perf.data" which contains tracing
+  results of lock events.
+
+  'perf lock trace' shows raw lock events.
+
+  'perf lock report' reports statistical data.
+
+SEE ALSO
+--------
+linkperf:perf[1]
diff --git a/tools/perf/builtin-lock.c b/tools/perf/builtin-lock.c
index fb9ab2a..e12c844 100644
--- a/tools/perf/builtin-lock.c
+++ b/tools/perf/builtin-lock.c
@@ -460,6 +460,150 @@
 		process_lock_release_event(data, event, cpu, timestamp, thread);
 }
 
+struct raw_event_queue {
+	u64			timestamp;
+	int			cpu;
+	void			*data;
+	struct thread		*thread;
+	struct list_head	list;
+};
+
+static LIST_HEAD(raw_event_head);
+
+#define FLUSH_PERIOD	(5 * NSEC_PER_SEC)
+
+static u64 flush_limit = ULLONG_MAX;
+static u64 last_flush = 0;
+struct raw_event_queue *last_inserted;
+
+static void flush_raw_event_queue(u64 limit)
+{
+	struct raw_event_queue *tmp, *iter;
+
+	list_for_each_entry_safe(iter, tmp, &raw_event_head, list) {
+		if (iter->timestamp > limit)
+			return;
+
+		if (iter == last_inserted)
+			last_inserted = NULL;
+
+		process_raw_event(iter->data, iter->cpu, iter->timestamp,
+				  iter->thread);
+
+		last_flush = iter->timestamp;
+		list_del(&iter->list);
+		free(iter->data);
+		free(iter);
+	}
+}
+
+static void __queue_raw_event_end(struct raw_event_queue *new)
+{
+	struct raw_event_queue *iter;
+
+	list_for_each_entry_reverse(iter, &raw_event_head, list) {
+		if (iter->timestamp < new->timestamp) {
+			list_add(&new->list, &iter->list);
+			return;
+		}
+	}
+
+	list_add(&new->list, &raw_event_head);
+}
+
+static void __queue_raw_event_before(struct raw_event_queue *new,
+				     struct raw_event_queue *iter)
+{
+	list_for_each_entry_continue_reverse(iter, &raw_event_head, list) {
+		if (iter->timestamp < new->timestamp) {
+			list_add(&new->list, &iter->list);
+			return;
+		}
+	}
+
+	list_add(&new->list, &raw_event_head);
+}
+
+static void __queue_raw_event_after(struct raw_event_queue *new,
+				     struct raw_event_queue *iter)
+{
+	list_for_each_entry_continue(iter, &raw_event_head, list) {
+		if (iter->timestamp > new->timestamp) {
+			list_add_tail(&new->list, &iter->list);
+			return;
+		}
+	}
+	list_add_tail(&new->list, &raw_event_head);
+}
+
+/* The queue is ordered by time */
+static void __queue_raw_event(struct raw_event_queue *new)
+{
+	if (!last_inserted) {
+		__queue_raw_event_end(new);
+		return;
+	}
+
+	/*
+	 * Most of the time the current event has a timestamp
+	 * very close to the last event inserted, unless we just switched
+	 * to another event buffer. Having a sorting based on a list and
+	 * on the last inserted event that is close to the current one is
+	 * probably more efficient than an rbtree based sorting.
+	 */
+	if (last_inserted->timestamp >= new->timestamp)
+		__queue_raw_event_before(new, last_inserted);
+	else
+		__queue_raw_event_after(new, last_inserted);
+}
+
+static void queue_raw_event(void *data, int raw_size, int cpu,
+			    u64 timestamp, struct thread *thread)
+{
+	struct raw_event_queue *new;
+
+	if (flush_limit == ULLONG_MAX)
+		flush_limit = timestamp + FLUSH_PERIOD;
+
+	if (timestamp < last_flush) {
+		printf("Warning: Timestamp below last timeslice flush\n");
+		return;
+	}
+
+	new = malloc(sizeof(*new));
+	if (!new)
+		die("Not enough memory\n");
+
+	new->timestamp = timestamp;
+	new->cpu = cpu;
+	new->thread = thread;
+
+	new->data = malloc(raw_size);
+	if (!new->data)
+		die("Not enough memory\n");
+
+	memcpy(new->data, data, raw_size);
+
+	__queue_raw_event(new);
+	last_inserted = new;
+
+	/*
+	 * We want to have a slice of events covering 2 * FLUSH_PERIOD
+	 * If FLUSH_PERIOD is big enough, it ensures every events that occured
+	 * in the first half of the timeslice have all been buffered and there
+	 * are none remaining (we need that because of the weakly ordered
+	 * event recording we have). Then once we reach the 2 * FLUSH_PERIOD
+	 * timeslice, we flush the first half to be gentle with the memory
+	 * (the second half can still get new events in the middle, so wait
+	 * another period to flush it)
+	 */
+	if (new->timestamp > flush_limit &&
+		new->timestamp - flush_limit > FLUSH_PERIOD) {
+		flush_limit += FLUSH_PERIOD;
+		flush_raw_event_queue(flush_limit);
+	}
+}
+
 static int process_sample_event(event_t *event, struct perf_session *session)
 {
 	struct thread *thread;
@@ -480,7 +624,7 @@
 	if (profile_cpu != -1 && profile_cpu != (int) data.cpu)
 		return 0;
 
-	process_raw_event(data.raw_data, data.cpu, data.time, thread);
+	queue_raw_event(data.raw_data, data.raw_size, data.cpu, data.time, thread);
 
 	return 0;
 }
@@ -576,6 +720,7 @@
 	setup_pager();
 	select_key();
 	read_events();
+	flush_raw_event_queue(ULLONG_MAX);
 	sort_result();
 	print_result();
 }
@@ -608,7 +753,6 @@
 	"record",
 	"-a",
 	"-R",
-	"-M",
 	"-f",
 	"-m", "1024",
 	"-c", "1",
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 5db687f..407041d 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -573,7 +573,8 @@
 
 	if (symbol__init() < 0)
 		return -1;
-	setup_pager();
+	if (!script_name)
+		setup_pager();
 
 	session = perf_session__new(input_name, O_RDONLY, 0);
 	if (session == NULL)
@@ -608,7 +609,6 @@
 			return -1;
 		}
 
-		perf_header__read(&session->header, input);
 		err = scripting_ops->generate_script("perf-trace");
 		goto out;
 	}
diff --git a/tools/perf/command-list.txt b/tools/perf/command-list.txt
index 9afcff2..db6ee94 100644
--- a/tools/perf/command-list.txt
+++ b/tools/perf/command-list.txt
@@ -18,3 +18,4 @@
 perf-trace			mainporcelain common
 perf-probe			mainporcelain common
 perf-kmem			mainporcelain common
+perf-lock			mainporcelain common
diff --git a/tools/perf/perf-archive.sh b/tools/perf/perf-archive.sh
index 45fbe2f..910468e 100644
--- a/tools/perf/perf-archive.sh
+++ b/tools/perf/perf-archive.sh
@@ -9,8 +9,9 @@
 
 DEBUGDIR=~/.debug/
 BUILDIDS=$(mktemp /tmp/perf-archive-buildids.XXXXXX)
+NOBUILDID=0000000000000000000000000000000000000000
 
-perf buildid-list -i $PERF_DATA --with-hits > $BUILDIDS
+perf buildid-list -i $PERF_DATA --with-hits | grep -v "^$NOBUILDID " > $BUILDIDS
 if [ ! -s $BUILDIDS ] ; then
 	echo "perf archive: no build-ids found"
 	rm -f $BUILDIDS
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index 57cb107..cd32c20 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -445,7 +445,7 @@
 
 	/*
 	 * We use PATH to find perf commands, but we prepend some higher
-	 * precidence paths: the "--exec-path" option, the PERF_EXEC_PATH
+	 * precedence paths: the "--exec-path" option, the PERF_EXEC_PATH
 	 * environment, and the $(perfexecdir) from the Makefile at build
 	 * time.
 	 */
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index 75f941b..6fb379b 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -65,9 +65,7 @@
  * Use the __kuser_memory_barrier helper in the CPU helper page. See
  * arch/arm/kernel/entry-armv.S in the kernel source for details.
  */
-#define rmb()		asm volatile("mov r0, #0xffff0fff; mov lr, pc;" \
-				     "sub pc, r0, #95" ::: "r0", "lr", "cc", \
-				     "memory")
+#define rmb()		((void(*)(void))0xffff0fa0)()
 #define cpu_relax()	asm volatile("":::"memory")
 #endif
 
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index e8daf5c..44408c2 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -321,7 +321,7 @@
 			new_depth_mask &= ~(1 << (depth - 1));
 
 		/*
-		 * But we keep the older depth mask for the line seperator
+		 * But we keep the older depth mask for the line separator
 		 * to keep the level link until we reach the last child
 		 */
 		ret += ipchain__fprintf_graph_line(fp, depth, depth_mask,
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index c971e81..53181db 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -508,8 +508,8 @@
 	struct str_node *ent;
 
 	setup_pager();
-
 	memset(&pp, 0, sizeof(pp));
+
 	fd = open_kprobe_events(O_RDONLY, 0);
 	rawlist = get_trace_kprobe_event_rawlist(fd);
 	close(fd);