powerpc/pci: Make both ppc32 and ppc64 use sysdata for pci_controller

Currently, ppc32 uses sysdata for the pci_controller pointer, and
ppc64 uses it to hold the device_node pointer.  This patch moves the
of_node pointer into (struct pci_bus*)->dev.of_node and
(struct pci_dev*)->dev.of_node so that sysdata can be converted to always
use the pci_controller pointer instead.  It also fixes up the
allocating of pci devices so that the of_node pointer gets assigned
consistently and increments the ref count.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index b2c363e..9bd951c 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -74,7 +74,7 @@
 #endif /* CONFIG_EEH */
 
 	/* Scan the bus */
-	pcibios_scan_phb(phb, dev->dev.of_node);
+	pcibios_scan_phb(phb);
 	if (phb->bus == NULL)
 		return -ENXIO;
 
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index eb341be..3cd85fa 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1688,13 +1688,8 @@
 /**
  * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
  * @hose: Pointer to the PCI host controller instance structure
- * @sysdata: value to use for sysdata pointer.  ppc32 and ppc64 differ here
- *
- * Note: the 'data' pointer is a temporary measure.  As 32 and 64 bit
- * pci code gets merged, this parameter should become unnecessary because
- * both will use the same value.
  */
-void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata)
+void __devinit pcibios_scan_phb(struct pci_controller *hose)
 {
 	struct pci_bus *bus;
 	struct device_node *node = hose->dn;
@@ -1704,13 +1699,13 @@
 		 node ? node->full_name : "<NO NAME>");
 
 	/* Create an empty bus for the toplevel */
-	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops,
-			     sysdata);
+	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
 	if (bus == NULL) {
 		pr_err("Failed to create bus for PCI domain %04x\n",
 			hose->global_number);
 		return;
 	}
+	bus->dev.of_node = of_node_get(node);
 	bus->secondary = hose->first_busno;
 	hose->bus = bus;
 
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index e7db5b4..bedb370 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -381,7 +381,7 @@
 		if (pci_assign_all_buses)
 			hose->first_busno = next_busno;
 		hose->last_busno = 0xff;
-		pcibios_scan_phb(hose, hose);
+		pcibios_scan_phb(hose);
 		pci_bus_add_devices(hose->bus);
 		if (pci_assign_all_buses || next_busno <= hose->last_busno)
 			next_busno = hose->last_busno + pcibios_assign_bus_offset;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 8515776..fc6452b 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -64,7 +64,7 @@
 
 	/* Scan all of the recorded PCI controllers.  */
 	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		pcibios_scan_phb(hose, hose->dn);
+		pcibios_scan_phb(hose);
 		pci_bus_add_devices(hose->bus);
 	}
 
@@ -242,10 +242,10 @@
 			break;
 		bus = NULL;
 	}
-	if (bus == NULL || bus->sysdata == NULL)
+	if (bus == NULL || bus->dev.of_node == NULL)
 		return -ENODEV;
 
-	hose_node = (struct device_node *)bus->sysdata;
+	hose_node = bus->dev.of_node;
 	hose = PCI_DN(hose_node)->phb;
 
 	switch (which) {
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index d56b35e..2985268 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -161,7 +161,7 @@
 /*
  * This is the "slow" path for looking up a device_node from a
  * pci_dev.  It will hunt for the device under its parent's
- * phb and then update sysdata for a future fastpath.
+ * phb and then update of_node pointer.
  *
  * It may also do fixups on the actual device since this happens
  * on the first read/write.
@@ -170,16 +170,19 @@
  * In this case it may probe for real hardware ("just in case")
  * and add a device_node to the device tree if necessary.
  *
+ * Is this function necessary anymore now that dev->dev.of_node is
+ * used to store the node pointer?
+ *
  */
 struct device_node *fetch_dev_dn(struct pci_dev *dev)
 {
-	struct device_node *orig_dn = dev->sysdata;
+	struct device_node *orig_dn = dev->dev.of_node;
 	struct device_node *dn;
 	unsigned long searchval = (dev->bus->number << 8) | dev->devfn;
 
 	dn = traverse_pci_devices(orig_dn, is_devfn_node, (void *)searchval);
 	if (dn)
-		dev->sysdata = dn;
+		dev->dev.of_node = dn;
 	return dn;
 }
 EXPORT_SYMBOL(fetch_dev_dn);
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index e7515063..1e89a72 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -135,7 +135,7 @@
 	pr_debug("    create device, devfn: %x, type: %s\n", devfn, type);
 
 	dev->bus = bus;
-	dev->sysdata = node;
+	dev->dev.of_node = of_node_get(node);
 	dev->dev.parent = bus->bridge;
 	dev->dev.bus = &pci_bus_type;
 	dev->devfn = devfn;
@@ -238,7 +238,7 @@
 	bus->primary = dev->bus->number;
 	bus->subordinate = busrange[1];
 	bus->bridge_ctl = 0;
-	bus->sysdata = node;
+	bus->dev.of_node = of_node_get(node);
 
 	/* parse ranges property */
 	/* PCI #address-cells == 3 and #size-cells == 2 always */