[SCSI] mptfusion: mptctl Remove credits and update copyright
(1) mptctl.c: Remove credits and update copyright
(2) mptctl.c: cleanup in get_iocinfo
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 70b0cfb..7f9a877 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -1,40 +1,12 @@
/*
* linux/drivers/message/fusion/mptctl.c
- * Fusion MPT misc device (ioctl) driver.
- * For use with PCI chip/adapter(s):
- * LSIFC9xx/LSI409xx Fibre Channel
+ * mpt Ioctl driver.
+ * For use with LSI Logic PCI chip/adapters
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Credits:
- * This driver would not exist if not for Alan Cox's development
- * of the linux i2o driver.
- *
- * A special thanks to Pamela Delaney (LSI Logic) for tons of work
- * and countless enhancements while adding support for the 1030
- * chip family. Pam has been instrumental in the development of
- * of the 2.xx.xx series fusion drivers, and her contributions are
- * far too numerous to hope to list in one place.
- *
- * A huge debt of gratitude is owed to David S. Miller (DaveM)
- * for fixing much of the stupid and broken stuff in the early
- * driver while porting to sparc64 platform. THANK YOU!
- *
- * A big THANKS to Eddie C. Dost for fixing the ioctl path
- * and most importantly f/w download on sparc64 platform!
- * (plus Eddie's other helpful hints and insights)
- *
- * Thanks to Arnaldo Carvalho de Melo for finding and patching
- * a potential memory leak in mptctl_do_fw_download(),
- * and for some kmalloc insight:-)
- *
- * (see also mptbase.c)
- *
- * Copyright (c) 1999-2004 LSI Logic Corporation
- * Originally By: Steven J. Ralston, Noah Romer
- * (mailto:sjralston1@netscape.net)
+ * Copyright (c) 1999-2005 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
- * $Id: mptctl.c,v 1.63 2002/12/03 21:26:33 pdelaney Exp $
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
@@ -95,8 +67,8 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
-#define COPYRIGHT "Copyright (c) 1999-2004 LSI Logic Corporation"
-#define MODULEAUTHOR "Steven J. Ralston, Noah Romer, Pamela Delaney"
+#define COPYRIGHT "Copyright (c) 1999-2005 LSI Logic Corporation"
+#define MODULEAUTHOR "LSI Logic Corporation"
#include "mptbase.h"
#include "mptctl.h"
@@ -1119,7 +1091,7 @@
int numDevices = 0;
unsigned int max_id;
int ii;
- int port;
+ unsigned int port;
int cim_rev;
u8 revision;
@@ -1162,9 +1134,7 @@
return -ENODEV;
}
- /* Verify the data transfer size is correct.
- * Ignore the port setting.
- */
+ /* Verify the data transfer size is correct. */
if (karg->hdr.maxDataSize != data_size) {
printk(KERN_ERR "%s@%d::mptctl_getiocinfo - "
"Structure size mismatch. Command not completed.\n",
@@ -1181,6 +1151,8 @@
else
karg->adapterType = MPT_IOCTL_INTERFACE_SCSI;
+ if (karg->hdr.port > 1)
+ return -EINVAL;
port = karg->hdr.port;
karg->port = port;
