ide: add ->read_status method
* Remove ide_read_status() inline helper.
* Add ->read_status method for reading ATA Status register
and use it instead of ->INB.
While at it:
* Don't use HWGROUP() macro.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 76afa1f..3005a63 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -127,7 +127,7 @@
return 0;
}
-static u8 sgiioc4_INB(unsigned long);
+static u8 sgiioc4_read_status(ide_hwif_t *);
static int
sgiioc4_clearirq(ide_drive_t * drive)
@@ -141,18 +141,19 @@
intr_reg = readl((void __iomem *)other_ir);
if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
/*
- * Using sgiioc4_INB to read the Status register has a side
- * effect of clearing the interrupt. The first read should
+ * Using sgiioc4_read_status to read the Status register has a
+ * side effect of clearing the interrupt. The first read should
* clear it if it is set. The second read should return
* a "clear" status if it got cleared. If not, then spin
* for a bit trying to clear it.
*/
- u8 stat = sgiioc4_INB(io_ports->status_addr);
+ u8 stat = sgiioc4_read_status(hwif);
int count = 0;
- stat = sgiioc4_INB(io_ports->status_addr);
+
+ stat = sgiioc4_read_status(hwif);
while ((stat & 0x80) && (count++ < 100)) {
udelay(1);
- stat = sgiioc4_INB(io_ports->status_addr);
+ stat = sgiioc4_read_status(hwif);
}
if (intr_reg & 0x02) {
@@ -304,9 +305,9 @@
ide_dma_lost_irq(drive);
}
-static u8
-sgiioc4_INB(unsigned long port)
+static u8 sgiioc4_read_status(ide_hwif_t *hwif)
{
+ unsigned long port = hwif->io_ports.status_addr;
u8 reg = (u8) readb((void __iomem *) port);
if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */
@@ -628,7 +629,7 @@
/* Initializing chipset IRQ Registers */
writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
- hwif->INB = &sgiioc4_INB;
+ hwif->read_status = sgiioc4_read_status;
idx[0] = hwif->index;
