ASoC: tlv320aic32x4: Add gpio configuration to the codec
Add the ability to configure the MFP1->MFP5 registers
as GPIOs. In addition adding ALSA controls to get and set
the GPIO state.
Per the data sheet each MFP can be configured as a GPIO
input only, output only or either an input or output.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/include/sound/tlv320aic32x4.h b/include/sound/tlv320aic32x4.h
index 24e5d99..22305c0 100644
--- a/include/sound/tlv320aic32x4.h
+++ b/include/sound/tlv320aic32x4.h
@@ -22,7 +22,30 @@
#define AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K 0x00000001
#define AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K 0x00000002
+/* GPIO API */
+#define AIC32X4_MFPX_DEFAULT_VALUE 0xff
+
+#define AIC32X4_MFP1_DIN_DISABLED 0
+#define AIC32X4_MFP1_DIN_ENABLED 0x2
+#define AIC32X4_MFP1_GPIO_IN 0x4
+
+#define AIC32X4_MFP2_GPIO_OUT_LOW 0x0
+#define AIC32X4_MFP2_GPIO_OUT_HIGH 0x1
+
+#define AIC32X4_MFP_GPIO_ENABLED 0x4
+
+#define AIC32X4_MFP5_GPIO_DISABLED 0x0
+#define AIC32X4_MFP5_GPIO_INPUT 0x8
+#define AIC32X4_MFP5_GPIO_OUTPUT 0xc
+#define AIC32X4_MFP5_GPIO_OUT_LOW 0x0
+#define AIC32X4_MFP5_GPIO_OUT_HIGH 0x1
+
+struct aic32x4_setup_data {
+ unsigned int gpio_func[5];
+};
+
struct aic32x4_pdata {
+ struct aic32x4_setup_data *setup;
u32 power_cfg;
u32 micpga_routing;
bool swapdacs;
