.. SPDX-License-Identifier: GPL-2.0
.. include:: <isonum.txt>

============================================================
Linuxized ACPICA - Introduction to ACPICA Release Automation
============================================================

:Copyright: |copy| 2013-2016, Intel Corporation

:Author: Lv Zheng <lv.zheng@intel.com>


Abstract
========
This document describes the ACPICA project and the relationship between
ACPICA and Linux.  It also describes how ACPICA code in drivers/acpi/acpica,
include/acpi and tools/power/acpi is automatically updated to follow the
upstream.

ACPICA Project
==============

The ACPI Component Architecture (ACPICA) project provides an operating
system (OS)-independent reference implementation of the Advanced
Configuration and Power Interface Specification (ACPI).  It has been
adapted by various host OSes.  By directly integrating ACPICA, Linux can
also benefit from the application experiences of ACPICA from other host
OSes.

The homepage of ACPICA project is: www.acpica.org, it is maintained and
supported by Intel Corporation.

The following figure depicts the Linux ACPI subsystem where the ACPICA
adaptation is included::

      +---------------------------------------------------------+
      |                                                         |
      |   +---------------------------------------------------+ |
      |   | +------------------+                              | |
      |   | | Table Management |                              | |
      |   | +------------------+                              | |
      |   | +----------------------+                          | |
      |   | | Namespace Management |                          | |
      |   | +----------------------+                          | |
      |   | +------------------+       ACPICA Components      | |
      |   | | Event Management |                              | |
      |   | +------------------+                              | |
      |   | +---------------------+                           | |
      |   | | Resource Management |                           | |
      |   | +---------------------+                           | |
      |   | +---------------------+                           | |
      |   | | Hardware Management |                           | |
      |   | +---------------------+                           | |
      | +---------------------------------------------------+ | |
      | | |                            +------------------+ | | |
      | | |                            | OS Service Layer | | | |
      | | |                            +------------------+ | | |
      | | +-------------------------------------------------|-+ |
      | |   +--------------------+                          |   |
      | |   | Device Enumeration |                          |   |
      | |   +--------------------+                          |   |
      | |   +------------------+                            |   |
      | |   | Power Management |                            |   |
      | |   +------------------+     Linux/ACPI Components  |   |
      | |   +--------------------+                          |   |
      | |   | Thermal Management |                          |   |
      | |   +--------------------+                          |   |
      | |   +--------------------------+                    |   |
      | |   | Drivers for ACPI Devices |                    |   |
      | |   +--------------------------+                    |   |
      | |   +--------+                                      |   |
      | |   | ...... |                                      |   |
      | |   +--------+                                      |   |
      | +---------------------------------------------------+   |
      |                                                         |
      +---------------------------------------------------------+

                 Figure 1. Linux ACPI Software Components

.. note::
    A. OS Service Layer - Provided by Linux to offer OS dependent
       implementation of the predefined ACPICA interfaces (acpi_os_*).
       ::

         include/acpi/acpiosxf.h
         drivers/acpi/osl.c
         include/acpi/platform
         include/asm/acenv.h
    B. ACPICA Functionality - Released from ACPICA code base to offer
       OS independent implementation of the ACPICA interfaces (acpi_*).
       ::

         drivers/acpi/acpica
         include/acpi/ac*.h
         tools/power/acpi
    C. Linux/ACPI Functionality - Providing Linux specific ACPI
       functionality to the other Linux kernel subsystems and user space
       programs.
       ::

         drivers/acpi
         include/linux/acpi.h
         include/linux/acpi*.h
         include/acpi
         tools/power/acpi
    D. Architecture Specific ACPICA/ACPI Functionalities - Provided by the
       ACPI subsystem to offer architecture specific implementation of the
       ACPI interfaces.  They are Linux specific components and are out of
       the scope of this document.
       ::

         include/asm/acpi.h
         include/asm/acpi*.h
         arch/*/acpi

ACPICA Release
==============

The ACPICA project maintains its code base at the following repository URL:
https://github.com/acpica/acpica.git. As a rule, a release is made every
month.

As the coding style adopted by the ACPICA project is not acceptable by
Linux, there is a release process to convert the ACPICA git commits into
Linux patches.  The patches generated by this process are referred to as
"linuxized ACPICA patches".  The release process is carried out on a local
copy the ACPICA git repository.  Each commit in the monthly release is
converted into a linuxized ACPICA patch.  Together, they form the monthly
ACPICA release patchset for the Linux ACPI community.  This process is
illustrated in the following figure::

    +-----------------------------+
    | acpica / master (-) commits |
    +-----------------------------+
       /|\         |
        |         \|/
        |  /---------------------\    +----------------------+
        | < Linuxize repo Utility >-->| old linuxized acpica |--+
        |  \---------------------/    +----------------------+  |
        |                                                       |
     /---------\                                                |
    < git reset >                                                \
     \---------/                                                  \
       /|\                                                        /+-+
        |                                                        /   |
    +-----------------------------+                             |    |
    | acpica / master (+) commits |                             |    |
    +-----------------------------+                             |    |
                   |                                            |    |
                  \|/                                           |    |
         /-----------------------\    +----------------------+  |    |
        < Linuxize repo Utilities >-->| new linuxized acpica |--+    |
         \-----------------------/    +----------------------+       |
                                                                    \|/
    +--------------------------+                  /----------------------\
    | Linuxized ACPICA Patches |<----------------< Linuxize patch Utility >
    +--------------------------+                  \----------------------/
                   |
                  \|/
     /---------------------------\
    < Linux ACPI Community Review >
     \---------------------------/
                   |
                  \|/
    +-----------------------+    /------------------\    +----------------+
    | linux-pm / linux-next |-->< Linux Merge Window >-->| linux / master |
    +-----------------------+    \------------------/    +----------------+

                Figure 2. ACPICA -> Linux Upstream Process

.. note::
    A. Linuxize Utilities - Provided by the ACPICA repository, including a
       utility located in source/tools/acpisrc folder and a number of
       scripts located in generate/linux folder.
    B. acpica / master - "master" branch of the git repository at
       <https://github.com/acpica/acpica.git>.
    C. linux-pm / linux-next - "linux-next" branch of the git repository at
       <https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git>.
    D. linux / master - "master" branch of the git repository at
       <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git>.

   Before the linuxized ACPICA patches are sent to the Linux ACPI community
   for review, there is a quality assurance build test process to reduce
   porting issues.  Currently this build process only takes care of the
   following kernel configuration options:
   CONFIG_ACPI/CONFIG_ACPI_DEBUG/CONFIG_ACPI_DEBUGGER

ACPICA Divergences
==================

Ideally, all of the ACPICA commits should be converted into Linux patches
automatically without manual modifications, the "linux / master" tree should
contain the ACPICA code that exactly corresponds to the ACPICA code
contained in "new linuxized acpica" tree and it should be possible to run
the release process fully automatically.

As a matter of fact, however, there are source code differences between
the ACPICA code in Linux and the upstream ACPICA code, referred to as
"ACPICA Divergences".

The various sources of ACPICA divergences include:
   1. Legacy divergences - Before the current ACPICA release process was
      established, there already had been divergences between Linux and
      ACPICA. Over the past several years those divergences have been greatly
      reduced, but there still are several ones and it takes time to figure
      out the underlying reasons for their existence.
   2. Manual modifications - Any manual modification (eg. coding style fixes)
      made directly in the Linux sources obviously hurts the ACPICA release
      automation.  Thus it is recommended to fix such issues in the ACPICA
      upstream source code and generate the linuxized fix using the ACPICA
      release utilities (please refer to Section 4 below for the details).
   3. Linux specific features - Sometimes it's impossible to use the
      current ACPICA APIs to implement features required by the Linux kernel,
      so Linux developers occasionally have to change ACPICA code directly.
      Those changes may not be acceptable by ACPICA upstream and in such cases
      they are left as committed ACPICA divergences unless the ACPICA side can
      implement new mechanisms as replacements for them.
   4. ACPICA release fixups - ACPICA only tests commits using a set of the
      user space simulation utilities, thus the linuxized ACPICA patches may
      break the Linux kernel, leaving us build/boot failures.  In order to
      avoid breaking Linux bisection, fixes are applied directly to the
      linuxized ACPICA patches during the release process.  When the release
      fixups are backported to the upstream ACPICA sources, they must follow
      the upstream ACPICA rules and so further modifications may appear.
      That may result in the appearance of new divergences.
   5. Fast tracking of ACPICA commits - Some ACPICA commits are regression
      fixes or stable-candidate material, so they are applied in advance with
      respect to the ACPICA release process.  If such commits are reverted or
      rebased on the ACPICA side in order to offer better solutions, new ACPICA
      divergences are generated.

ACPICA Development
==================

This paragraph guides Linux developers to use the ACPICA upstream release
utilities to obtain Linux patches corresponding to upstream ACPICA commits
before they become available from the ACPICA release process.

   1. Cherry-pick an ACPICA commit

   First you need to git clone the ACPICA repository and the ACPICA change
   you want to cherry pick must be committed into the local repository.

   Then the gen-patch.sh command can help to cherry-pick an ACPICA commit
   from the ACPICA local repository::

   $ git clone https://github.com/acpica/acpica
   $ cd acpica
   $ generate/linux/gen-patch.sh -u [commit ID]

   Here the commit ID is the ACPICA local repository commit ID you want to
   cherry pick.  It can be omitted if the commit is "HEAD".

   2. Cherry-pick recent ACPICA commits

   Sometimes you need to rebase your code on top of the most recent ACPICA
   changes that haven't been applied to Linux yet.

   You can generate the ACPICA release series yourself and rebase your code on
   top of the generated ACPICA release patches::

   $ git clone https://github.com/acpica/acpica
   $ cd acpica
   $ generate/linux/make-patches.sh -u [commit ID]

   The commit ID should be the last ACPICA commit accepted by Linux.  Usually,
   it is the commit modifying ACPI_CA_VERSION.  It can be found by executing
   "git blame source/include/acpixf.h" and referencing the line that contains
   "ACPI_CA_VERSION".

   3. Inspect the current divergences

   If you have local copies of both Linux and upstream ACPICA, you can generate
   a diff file indicating the state of the current divergences::

   # git clone https://github.com/acpica/acpica
   # git clone https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
   # cd acpica
   # generate/linux/divergence.sh -s ../linux