diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
new file mode 100644
index 0000000..35ffc4d
--- /dev/null
+++ b/arch/arm/mm/cache-v7.S
@@ -0,0 +1,253 @@
+/*
+ *  linux/arch/arm/mm/cache-v7.S
+ *
+ *  Copyright (C) 2001 Deep Blue Solutions Ltd.
+ *  Copyright (C) 2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This is the "shell" of the ARMv7 processor support.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+#include "proc-macros.S"
+
+/*
+ *	v7_flush_dcache_all()
+ *
+ *	Flush the whole D-cache.
+ *
+ *	Corrupted registers: r0-r5, r7, r9-r11
+ *
+ *	- mm    - mm_struct describing address space
+ */
+ENTRY(v7_flush_dcache_all)
+	mrc	p15, 1, r0, c0, c0, 1		@ read clidr
+	ands	r3, r0, #0x7000000		@ extract loc from clidr
+	mov	r3, r3, lsr #23			@ left align loc bit field
+	beq	finished			@ if loc is 0, then no need to clean
+	mov	r10, #0				@ start clean at cache level 0
+loop1:
+	add	r2, r10, r10, lsr #1		@ work out 3x current cache level
+	mov	r1, r0, lsr r2			@ extract cache type bits from clidr
+	and	r1, r1, #7			@ mask of the bits for current cache only
+	cmp	r1, #2				@ see what cache we have at this level
+	blt	skip				@ skip if no cache, or just i-cache
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	isb					@ isb to sych the new cssr&csidr
+	mrc	p15, 1, r1, c0, c0, 0		@ read the new csidr
+	and	r2, r1, #7			@ extract the length of the cache lines
+	add	r2, r2, #4			@ add 4 (line length offset)
+	ldr	r4, =0x3ff
+	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
+	clz	r5, r4				@ find bit position of way size increment
+	ldr	r7, =0x7fff
+	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
+loop2:
+	mov	r9, r4				@ create working copy of max way size
+loop3:
+	orr	r11, r10, r9, lsl r5		@ factor way and cache number into r11
+	orr	r11, r11, r7, lsl r2		@ factor index number into r11
+	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
+	subs	r9, r9, #1			@ decrement the way
+	bge	loop3
+	subs	r7, r7, #1			@ decrement the index
+	bge	loop2
+skip:
+	add	r10, r10, #2			@ increment cache number
+	cmp	r3, r10
+	bgt	loop1
+finished:
+	mov	r10, #0				@ swith back to cache level 0
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	isb
+	mov	pc, lr
+
+/*
+ *	v7_flush_cache_all()
+ *
+ *	Flush the entire cache system.
+ *  The data cache flush is now achieved using atomic clean / invalidates
+ *  working outwards from L1 cache. This is done using Set/Way based cache
+ *  maintainance instructions.
+ *  The instruction cache can still be invalidated back to the point of
+ *  unification in a single instruction.
+ *
+ */
+ENTRY(v7_flush_kern_cache_all)
+	stmfd	sp!, {r4-r5, r7, r9-r11, lr}
+	bl	v7_flush_dcache_all
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
+	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}
+	mov	pc, lr
+
+/*
+ *	v7_flush_cache_all()
+ *
+ *	Flush all TLB entries in a particular address space
+ *
+ *	- mm    - mm_struct describing address space
+ */
+ENTRY(v7_flush_user_cache_all)
+	/*FALLTHROUGH*/
+
+/*
+ *	v7_flush_cache_range(start, end, flags)
+ *
+ *	Flush a range of TLB entries in the specified address space.
+ *
+ *	- start - start address (may not be aligned)
+ *	- end   - end address (exclusive, may not be aligned)
+ *	- flags	- vm_area_struct flags describing address space
+ *
+ *	It is assumed that:
+ *	- we have a VIPT cache.
+ */
+ENTRY(v7_flush_user_cache_range)
+	mov	pc, lr
+
+/*
+ *	v7_coherent_kern_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified
+ *	region.  This is typically used when code has been written to
+ *	a memory region, and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ *
+ *	It is assumed that:
+ *	- the Icache does not read data from the write buffer
+ */
+ENTRY(v7_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	v7_coherent_user_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified
+ *	region.  This is typically used when code has been written to
+ *	a memory region, and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ *
+ *	It is assumed that:
+ *	- the Icache does not read data from the write buffer
+ */
+ENTRY(v7_coherent_user_range)
+	dcache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r0, r0, r3
+1:	mcr	p15, 0, r0, c7, c11, 1		@ clean D line to the point of unification
+	dsb
+	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I line
+	add	r0, r0, r2
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
+	dsb
+	isb
+	mov	pc, lr
+
+/*
+ *	v7_flush_kern_dcache_page(kaddr)
+ *
+ *	Ensure that the data held in the page kaddr is written back
+ *	to the page in question.
+ *
+ *	- kaddr   - kernel address (guaranteed to be page aligned)
+ */
+ENTRY(v7_flush_kern_dcache_page)
+	dcache_line_size r2, r3
+	add	r1, r0, #PAGE_SZ
+1:
+	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line / unified line
+	add	r0, r0, r2
+	cmp	r0, r1
+	blo	1b
+	dsb
+	mov	pc, lr
+
+/*
+ *	v7_dma_inv_range(start,end)
+ *
+ *	Invalidate the data cache within the specified region; we will
+ *	be performing a DMA operation in this region and we want to
+ *	purge old data in the cache.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+ENTRY(v7_dma_inv_range)
+	dcache_line_size r2, r3
+	sub	r3, r2, #1
+	tst	r0, r3
+	bic	r0, r0, r3
+	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
+
+	tst	r1, r3
+	bic	r1, r1, r3
+	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D / U line
+1:
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D / U line
+	add	r0, r0, r2
+	cmp	r0, r1
+	blo	1b
+	dsb
+	mov	pc, lr
+
+/*
+ *	v7_dma_clean_range(start,end)
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+ENTRY(v7_dma_clean_range)
+	dcache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r0, r0, r3
+1:
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D / U line
+	add	r0, r0, r2
+	cmp	r0, r1
+	blo	1b
+	dsb
+	mov	pc, lr
+
+/*
+ *	v7_dma_flush_range(start,end)
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+ENTRY(v7_dma_flush_range)
+	dcache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r0, r0, r3
+1:
+	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
+	add	r0, r0, r2
+	cmp	r0, r1
+	blo	1b
+	dsb
+	mov	pc, lr
+
+	__INITDATA
+
+	.type	v7_cache_fns, #object
+ENTRY(v7_cache_fns)
+	.long	v7_flush_kern_cache_all
+	.long	v7_flush_user_cache_all
+	.long	v7_flush_user_cache_range
+	.long	v7_coherent_kern_range
+	.long	v7_coherent_user_range
+	.long	v7_flush_kern_dcache_page
+	.long	v7_dma_inv_range
+	.long	v7_dma_clean_range
+	.long	v7_dma_flush_range
+	.size	v7_cache_fns, . - v7_cache_fns