[SCSI] hpsa: make target and lun match what SCSI REPORT LUNs returns
Some distros have a "rescan-scsi-bus.sh" script which depends on
SCSI REPORT LUNs not reporting something different than what the
driver tells the kernel, even if the driver uses scan_start and
scan_finished methods of the SCSI host template to override the
usual SCSI midlayer discovery code. Previously, 1 was added to
the LUN to make room to insert the RAID controller device at
LUN 0. Now, the RAID controller is moved to bus 3, and 1 is no
longer added to the LUN. However, SCSI REPORT LUNS on Smart Array
doesn't report physical devices like tape drives or auto-loaders
as it turns out, so those particular device types still won't match.
Generally the logical drives are reported first however, so at
least those should match.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 4e7df2e..264c176 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1647,30 +1647,15 @@
*target = (lunid >> 16) & 0x3fff;
*lun = lunid & 0x00ff;
} else {
- if (likely(is_scsi_rev_5(h))) {
- /* All current smart arrays (circa 2011) */
- *bus = 0;
- *target = 0;
- *lun = (lunid & 0x3fff) + 1;
- } else {
- /* Traditional old smart array way. */
- *bus = 0;
- *target = lunid & 0x3fff;
- *lun = 0;
- }
+ *bus = 0;
+ *target = 0;
+ *lun = (lunid & 0x3fff);
}
} else {
- /* physical device */
if (is_hba_lunid(lunaddrbytes))
- if (unlikely(is_scsi_rev_5(h))) {
- *bus = 0; /* put p1210m ctlr at 0,0,0 */
- *target = 0;
- *lun = 0;
- return;
- } else
- *bus = 3; /* traditional smartarray */
+ *bus = 3; /* controller */
else
- *bus = 2; /* physical disk */
+ *bus = 2; /* physical device */
*target = -1;
*lun = -1; /* we will fill these in later. */
}
