[SCSI] bfa: Add support for FC Arbitrated Loop topology.
- Add private loop topology support at 2G/4G/8G speeds with following
limitations
1. No support for multiple initiators in the loop
2. No public loop support. If attached to a loop with an FL_Port,
device continues to work as a private NL_Port in the loop
3. No auto topology detection. User has to manually set the
configured topology to loop if attaching to loop.
- When loop topology is configured, enabling FC port features
QoS/Trunk/TRL are not allowed and vice versa.
Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com>
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/bfa/bfa_defs.h b/drivers/scsi/bfa/bfa_defs.h
index b5a1595..f1c9314 100644
--- a/drivers/scsi/bfa/bfa_defs.h
+++ b/drivers/scsi/bfa/bfa_defs.h
@@ -159,6 +159,8 @@
BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */
BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */
BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */
+ BFA_STATUS_ERROR_TRL_ENABLED = 87, /* TRL is enabled */
+ BFA_STATUS_ERROR_QOS_ENABLED = 88, /* QoS is enabled */
BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */
BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact support */
BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */
@@ -184,6 +186,9 @@
BFA_STATUS_FAA_ACQ_ADDR = 200, /* Acquiring addr */
BFA_STATUS_ERROR_TRUNK_ENABLED = 203, /* Trunk enabled on adapter */
BFA_STATUS_MAX_ENTRY_REACHED = 212, /* MAX entry reached */
+ BFA_STATUS_TOPOLOGY_LOOP = 230, /* Topology is set to Loop */
+ BFA_STATUS_LOOP_UNSUPP_MEZZ = 231, /* Loop topology is not supported
+ * on mezz cards */
BFA_STATUS_MAX_VAL /* Unknown error code */
};
#define bfa_status_t enum bfa_status
