// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Code for Kernel probes Jump optimization.
 *
 * Copyright 2017, Anju T, IBM Corp.
 */

#include <linux/kprobes.h>
#include <linux/jump_label.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <asm/kprobes.h>
#include <asm/ptrace.h>
#include <asm/cacheflush.h>
#include <asm/code-patching.h>
#include <asm/sstep.h>
#include <asm/ppc-opcode.h>
#include <asm/inst.h>

#define TMPL_CALL_HDLR_IDX	\
	(optprobe_template_call_handler - optprobe_template_entry)
#define TMPL_EMULATE_IDX	\
	(optprobe_template_call_emulate - optprobe_template_entry)
#define TMPL_RET_IDX		\
	(optprobe_template_ret - optprobe_template_entry)
#define TMPL_OP_IDX		\
	(optprobe_template_op_address - optprobe_template_entry)
#define TMPL_INSN_IDX		\
	(optprobe_template_insn - optprobe_template_entry)
#define TMPL_END_IDX		\
	(optprobe_template_end - optprobe_template_entry)

DEFINE_INSN_CACHE_OPS(ppc_optinsn);

static bool insn_page_in_use;

static void *__ppc_alloc_insn_page(void)
{
	if (insn_page_in_use)
		return NULL;
	insn_page_in_use = true;
	return &optinsn_slot;
}

static void __ppc_free_insn_page(void *page __maybe_unused)
{
	insn_page_in_use = false;
}

struct kprobe_insn_cache kprobe_ppc_optinsn_slots = {
	.mutex = __MUTEX_INITIALIZER(kprobe_ppc_optinsn_slots.mutex),
	.pages = LIST_HEAD_INIT(kprobe_ppc_optinsn_slots.pages),
	/* insn_size initialized later */
	.alloc = __ppc_alloc_insn_page,
	.free = __ppc_free_insn_page,
	.nr_garbage = 0,
};

/*
 * Check if we can optimize this probe. Returns NIP post-emulation if this can
 * be optimized and 0 otherwise.
 */
static unsigned long can_optimize(struct kprobe *p)
{
	struct pt_regs regs;
	struct instruction_op op;
	unsigned long nip = 0;

	/*
	 * kprobe placed for kretprobe during boot time
	 * has a 'nop' instruction, which can be emulated.
	 * So further checks can be skipped.
	 */
	if (p->addr == (kprobe_opcode_t *)&kretprobe_trampoline)
		return (unsigned long)p->addr + sizeof(kprobe_opcode_t);

	/*
	 * We only support optimizing kernel addresses, but not
	 * module addresses.
	 *
	 * FIXME: Optimize kprobes placed in module addresses.
	 */
	if (!is_kernel_addr((unsigned long)p->addr))
		return 0;

	memset(&regs, 0, sizeof(struct pt_regs));
	regs.nip = (unsigned long)p->addr;
	regs.trap = 0x0;
	regs.msr = MSR_KERNEL;

	/*
	 * Kprobe placed in conditional branch instructions are
	 * not optimized, as we can't predict the nip prior with
	 * dummy pt_regs and can not ensure that the return branch
	 * from detour buffer falls in the range of address (i.e 32MB).
	 * A branch back from trampoline is set up in the detour buffer
	 * to the nip returned by the analyse_instr() here.
	 *
	 * Ensure that the instruction is not a conditional branch,
	 * and that can be emulated.
	 */
	if (!is_conditional_branch(ppc_inst_read((struct ppc_inst *)p->ainsn.insn)) &&
	    analyse_instr(&op, &regs,
			  ppc_inst_read((struct ppc_inst *)p->ainsn.insn)) == 1) {
		emulate_update_regs(&regs, &op);
		nip = regs.nip;
	}

	return nip;
}

static void optimized_callback(struct optimized_kprobe *op,
			       struct pt_regs *regs)
{
	/* This is possible if op is under delayed unoptimizing */
	if (kprobe_disabled(&op->kp))
		return;

	preempt_disable();

	if (kprobe_running()) {
		kprobes_inc_nmissed_count(&op->kp);
	} else {
		__this_cpu_write(current_kprobe, &op->kp);
		regs->nip = (unsigned long)op->kp.addr;
		get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
		opt_pre_handler(&op->kp, regs);
		__this_cpu_write(current_kprobe, NULL);
	}

	preempt_enable_no_resched();
}
NOKPROBE_SYMBOL(optimized_callback);

void arch_remove_optimized_kprobe(struct optimized_kprobe *op)
{
	if (op->optinsn.insn) {
		free_ppc_optinsn_slot(op->optinsn.insn, 1);
		op->optinsn.insn = NULL;
	}
}

/*
 * Generate instructions to load provided immediate 64-bit value
 * to register 'reg' and patch these instructions at 'addr'.
 */
static void patch_imm64_load_insns(unsigned long val, int reg, kprobe_opcode_t *addr)
{
	/* lis reg,(op)@highest */
	patch_instruction((struct ppc_inst *)addr,
			  ppc_inst(PPC_INST_ADDIS | ___PPC_RT(reg) |
				   ((val >> 48) & 0xffff)));
	addr++;

	/* ori reg,reg,(op)@higher */
	patch_instruction((struct ppc_inst *)addr,
			  ppc_inst(PPC_INST_ORI | ___PPC_RA(reg) |
				   ___PPC_RS(reg) | ((val >> 32) & 0xffff)));
	addr++;

	/* rldicr reg,reg,32,31 */
	patch_instruction((struct ppc_inst *)addr,
			  ppc_inst(PPC_INST_RLDICR | ___PPC_RA(reg) |
				   ___PPC_RS(reg) | __PPC_SH64(32) | __PPC_ME64(31)));
	addr++;

	/* oris reg,reg,(op)@h */
	patch_instruction((struct ppc_inst *)addr,
			  ppc_inst(PPC_INST_ORIS | ___PPC_RA(reg) |
				   ___PPC_RS(reg) | ((val >> 16) & 0xffff)));
	addr++;

	/* ori reg,reg,(op)@l */
	patch_instruction((struct ppc_inst *)addr,
			  ppc_inst(PPC_INST_ORI | ___PPC_RA(reg) |
				   ___PPC_RS(reg) | (val & 0xffff)));
}

int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *p)
{
	struct ppc_inst branch_op_callback, branch_emulate_step, temp;
	kprobe_opcode_t *op_callback_addr, *emulate_step_addr, *buff;
	long b_offset;
	unsigned long nip, size;
	int rc, i;

	kprobe_ppc_optinsn_slots.insn_size = MAX_OPTINSN_SIZE;

	nip = can_optimize(p);
	if (!nip)
		return -EILSEQ;

	/* Allocate instruction slot for detour buffer */
	buff = get_ppc_optinsn_slot();
	if (!buff)
		return -ENOMEM;

	/*
	 * OPTPROBE uses 'b' instruction to branch to optinsn.insn.
	 *
	 * The target address has to be relatively nearby, to permit use
	 * of branch instruction in powerpc, because the address is specified
	 * in an immediate field in the instruction opcode itself, ie 24 bits
	 * in the opcode specify the address. Therefore the address should
	 * be within 32MB on either side of the current instruction.
	 */
	b_offset = (unsigned long)buff - (unsigned long)p->addr;
	if (!is_offset_in_branch_range(b_offset))
		goto error;

	/* Check if the return address is also within 32MB range */
	b_offset = (unsigned long)(buff + TMPL_RET_IDX) -
			(unsigned long)nip;
	if (!is_offset_in_branch_range(b_offset))
		goto error;

	/* Setup template */
	/* We can optimize this via patch_instruction_window later */
	size = (TMPL_END_IDX * sizeof(kprobe_opcode_t)) / sizeof(int);
	pr_devel("Copying template to %p, size %lu\n", buff, size);
	for (i = 0; i < size; i++) {
		rc = patch_instruction((struct ppc_inst *)(buff + i),
				       ppc_inst(*(optprobe_template_entry + i)));
		if (rc < 0)
			goto error;
	}

	/*
	 * Fixup the template with instructions to:
	 * 1. load the address of the actual probepoint
	 */
	patch_imm64_load_insns((unsigned long)op, 3, buff + TMPL_OP_IDX);

	/*
	 * 2. branch to optimized_callback() and emulate_step()
	 */
	op_callback_addr = (kprobe_opcode_t *)ppc_kallsyms_lookup_name("optimized_callback");
	emulate_step_addr = (kprobe_opcode_t *)ppc_kallsyms_lookup_name("emulate_step");
	if (!op_callback_addr || !emulate_step_addr) {
		WARN(1, "Unable to lookup optimized_callback()/emulate_step()\n");
		goto error;
	}

	rc = create_branch(&branch_op_callback,
			   (struct ppc_inst *)(buff + TMPL_CALL_HDLR_IDX),
			   (unsigned long)op_callback_addr,
			   BRANCH_SET_LINK);

	rc |= create_branch(&branch_emulate_step,
			    (struct ppc_inst *)(buff + TMPL_EMULATE_IDX),
			    (unsigned long)emulate_step_addr,
			    BRANCH_SET_LINK);

	if (rc)
		goto error;

	patch_instruction((struct ppc_inst *)(buff + TMPL_CALL_HDLR_IDX),
			  branch_op_callback);
	patch_instruction((struct ppc_inst *)(buff + TMPL_EMULATE_IDX),
			  branch_emulate_step);

	/*
	 * 3. load instruction to be emulated into relevant register, and
	 */
	temp = ppc_inst_read((struct ppc_inst *)p->ainsn.insn);
	patch_imm64_load_insns(ppc_inst_as_u64(temp), 4, buff + TMPL_INSN_IDX);

	/*
	 * 4. branch back from trampoline
	 */
	patch_branch((struct ppc_inst *)(buff + TMPL_RET_IDX), (unsigned long)nip, 0);

	flush_icache_range((unsigned long)buff,
			   (unsigned long)(&buff[TMPL_END_IDX]));

	op->optinsn.insn = buff;

	return 0;

error:
	free_ppc_optinsn_slot(buff, 0);
	return -ERANGE;

}

int arch_prepared_optinsn(struct arch_optimized_insn *optinsn)
{
	return optinsn->insn != NULL;
}

/*
 * On powerpc, Optprobes always replaces one instruction (4 bytes
 * aligned and 4 bytes long). It is impossible to encounter another
 * kprobe in this address range. So always return 0.
 */
int arch_check_optimized_kprobe(struct optimized_kprobe *op)
{
	return 0;
}

void arch_optimize_kprobes(struct list_head *oplist)
{
	struct ppc_inst instr;
	struct optimized_kprobe *op;
	struct optimized_kprobe *tmp;

	list_for_each_entry_safe(op, tmp, oplist, list) {
		/*
		 * Backup instructions which will be replaced
		 * by jump address
		 */
		memcpy(op->optinsn.copied_insn, op->kp.addr,
					       RELATIVEJUMP_SIZE);
		create_branch(&instr,
			      (struct ppc_inst *)op->kp.addr,
			      (unsigned long)op->optinsn.insn, 0);
		patch_instruction((struct ppc_inst *)op->kp.addr, instr);
		list_del_init(&op->list);
	}
}

void arch_unoptimize_kprobe(struct optimized_kprobe *op)
{
	arch_arm_kprobe(&op->kp);
}

void arch_unoptimize_kprobes(struct list_head *oplist,
			     struct list_head *done_list)
{
	struct optimized_kprobe *op;
	struct optimized_kprobe *tmp;

	list_for_each_entry_safe(op, tmp, oplist, list) {
		arch_unoptimize_kprobe(op);
		list_move(&op->list, done_list);
	}
}

int arch_within_optimized_kprobe(struct optimized_kprobe *op,
				 unsigned long addr)
{
	return ((unsigned long)op->kp.addr <= addr &&
		(unsigned long)op->kp.addr + RELATIVEJUMP_SIZE > addr);
}