[PATCH] UHCI: various updates
This patch (as705) contains a small set of updates for uhci-hcd written
mostly by Dave Brownell:
* Root hub suspend messages come out labeled as root hub messages;
PCI messages should only come out when the pci device suspends.
* Rename the reset() method to better match its init() role
* Behave more like the other HCDs by returning -ESHUTDOWN for root-hub
suspend/resume errors.
* When an URB fails, associate the message with the usb device not
the host controller (it still hides endpoint and direction)
From: David Brownell <david-b@pacbell.net>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 5e75ad6d..dc9ed29 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -124,8 +124,9 @@
}
/*
- * Initialize a controller that was newly discovered or has just been
- * resumed. In either case we can't be sure of its previous state.
+ * Initialize a controller that was newly discovered or has lost power
+ * or otherwise been reset while it was suspended. In none of these cases
+ * can we be sure of its previous state.
*/
static void check_and_reset_hc(struct uhci_hcd *uhci)
{
@@ -198,7 +199,8 @@
int int_enable;
auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
- dev_dbg(uhci_dev(uhci), "%s%s\n", __FUNCTION__,
+ dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
+ "%s%s\n", __FUNCTION__,
(auto_stop ? " (auto-stop)" : ""));
/* If we get a suspend request when we're already auto-stopped
@@ -236,7 +238,8 @@
return;
}
if (!(inw(uhci->io_addr + USBSTS) & USBSTS_HCH))
- dev_warn(uhci_dev(uhci), "Controller not stopped yet!\n");
+ dev_warn(&uhci_to_hcd(uhci)->self.root_hub->dev,
+ "Controller not stopped yet!\n");
uhci_get_current_frame_number(uhci);
@@ -268,7 +271,8 @@
__releases(uhci->lock)
__acquires(uhci->lock)
{
- dev_dbg(uhci_dev(uhci), "%s%s\n", __FUNCTION__,
+ dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
+ "%s%s\n", __FUNCTION__,
uhci->rh_state == UHCI_RH_AUTO_STOPPED ?
" (auto-start)" : "");
@@ -406,7 +410,7 @@
uhci->frame, uhci->frame_dma_handle);
}
-static int uhci_reset(struct usb_hcd *hcd)
+static int uhci_init(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
unsigned io_size = (unsigned) hcd->rsrc_len;
@@ -672,12 +676,15 @@
static int uhci_rh_suspend(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ int rc = 0;
spin_lock_irq(&uhci->lock);
- if (!uhci->hc_inaccessible) /* Not dead */
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ rc = -ESHUTDOWN;
+ else if (!uhci->hc_inaccessible)
suspend_rh(uhci, UHCI_RH_SUSPENDED);
spin_unlock_irq(&uhci->lock);
- return 0;
+ return rc;
}
static int uhci_rh_resume(struct usb_hcd *hcd)
@@ -686,13 +693,10 @@
int rc = 0;
spin_lock_irq(&uhci->lock);
- if (uhci->hc_inaccessible) {
- if (uhci->rh_state == UHCI_RH_SUSPENDED) {
- dev_warn(uhci_dev(uhci), "HC isn't running!\n");
- rc = -ENODEV;
- }
- /* Otherwise the HC is dead */
- } else
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ dev_warn(&hcd->self.root_hub->dev, "HC isn't running!\n");
+ rc = -ESHUTDOWN;
+ } else if (!uhci->hc_inaccessible)
wakeup_rh(uhci);
spin_unlock_irq(&uhci->lock);
return rc;
@@ -746,6 +750,7 @@
if (uhci->rh_state == UHCI_RH_RESET) /* Dead */
return 0;
+
spin_lock_irq(&uhci->lock);
/* FIXME: Disable non-PME# remote wakeup? */
@@ -828,7 +833,7 @@
.flags = HCD_USB11,
/* Basic lifecycle operations */
- .reset = uhci_reset,
+ .reset = uhci_init,
.start = uhci_start,
#ifdef CONFIG_PM
.suspend = uhci_suspend,
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index cbbaa4c..b173d91 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -910,7 +910,7 @@
uhci_packetout(td_token(td)));
if ((debug == 1 && ret != -EPIPE) || debug > 1) {
/* Some debugging code */
- dev_dbg(uhci_dev(uhci),
+ dev_dbg(&urb->dev->dev,
"%s: failed with status %x\n",
__FUNCTION__, status);
