[PATCH] remove old scsi data direction macros
these have been wrappers for the generic dma direction bits since 2.5.x.
This patch converts the few remaining drivers and removes the macros.
Arjan noticed there's some hunk in here that shouldn't. Updated patch
below:
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index fb2877c..550c992 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -687,7 +687,7 @@
int direction;
cmd = scb->io_ctx;
- direction = scsi_to_pci_dma_dir(cmd->sc_data_direction);
+ direction = cmd->sc_data_direction;
ahd_sync_sglist(ahd, scb, BUS_DMASYNC_POSTWRITE);
if (cmd->use_sg != 0) {
struct scatterlist *sg;
@@ -3338,7 +3338,7 @@
}
ahd_linux_dv_fill_cmd(ahd, cmd, devinfo);
- cmd->sc_data_direction = SCSI_DATA_READ;
+ cmd->sc_data_direction = DMA_FROM_DEVICE;
cmd->cmd_len = 6;
cmd->cmnd[0] = INQUIRY;
cmd->cmnd[4] = request_length;
@@ -3363,7 +3363,7 @@
#endif
/* Do a TUR to clear out any non-fatal transitional state */
ahd_linux_dv_fill_cmd(ahd, cmd, devinfo);
- cmd->sc_data_direction = SCSI_DATA_NONE;
+ cmd->sc_data_direction = DMA_NONE;
cmd->cmd_len = 6;
cmd->cmnd[0] = TEST_UNIT_READY;
}
@@ -3385,7 +3385,7 @@
free(targ->dv_buffer, M_DEVBUF);
targ->dv_buffer = malloc(AHD_REBD_LEN, M_DEVBUF, M_WAITOK);
ahd_linux_dv_fill_cmd(ahd, cmd, devinfo);
- cmd->sc_data_direction = SCSI_DATA_READ;
+ cmd->sc_data_direction = DMA_FROM_DEVICE;
cmd->cmd_len = 10;
cmd->cmnd[0] = READ_BUFFER;
cmd->cmnd[1] = 0x0b;
@@ -3407,7 +3407,7 @@
}
#endif
ahd_linux_dv_fill_cmd(ahd, cmd, devinfo);
- cmd->sc_data_direction = SCSI_DATA_WRITE;
+ cmd->sc_data_direction = DMA_TO_DEVICE;
cmd->cmd_len = 10;
cmd->cmnd[0] = WRITE_BUFFER;
cmd->cmnd[1] = 0x0a;
@@ -3429,7 +3429,7 @@
}
#endif
ahd_linux_dv_fill_cmd(ahd, cmd, devinfo);
- cmd->sc_data_direction = SCSI_DATA_READ;
+ cmd->sc_data_direction = DMA_FROM_DEVICE;
cmd->cmd_len = 10;
cmd->cmnd[0] = READ_BUFFER;
cmd->cmnd[1] = 0x0a;
@@ -3455,7 +3455,7 @@
}
#endif
ahd_linux_dv_fill_cmd(ahd, cmd, devinfo);
- cmd->sc_data_direction = SCSI_DATA_NONE;
+ cmd->sc_data_direction = DMA_NONE;
cmd->cmd_len = 6;
cmd->cmnd[0] = START_STOP_UNIT;
cmd->cmnd[4] = le | SSS_START;
@@ -4018,7 +4018,7 @@
int dir;
cur_seg = (struct scatterlist *)cmd->request_buffer;
- dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
+ dir = cmd->sc_data_direction;
nseg = pci_map_sg(ahd->dev_softc, cur_seg,
cmd->use_sg, dir);
scb->platform_data->xfer_len = 0;
@@ -4038,7 +4038,7 @@
int dir;
sg = scb->sg_list;
- dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
+ dir = cmd->sc_data_direction;
addr = pci_map_single(ahd->dev_softc,
cmd->request_buffer,
cmd->request_bufflen, dir);
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 031c6aa..35d6de5 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -693,12 +693,12 @@
sg = (struct scatterlist *)cmd->request_buffer;
pci_unmap_sg(ahc->dev_softc, sg, cmd->use_sg,
- scsi_to_pci_dma_dir(cmd->sc_data_direction));
+ cmd->sc_data_direction);
} else if (cmd->request_bufflen != 0) {
pci_unmap_single(ahc->dev_softc,
scb->platform_data->buf_busaddr,
cmd->request_bufflen,
- scsi_to_pci_dma_dir(cmd->sc_data_direction));
+ cmd->sc_data_direction);
}
}
@@ -3007,7 +3007,7 @@
}
ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
- cmd->sc_data_direction = SCSI_DATA_READ;
+ cmd->sc_data_direction = DMA_FROM_DEVICE;
cmd->cmd_len = 6;
cmd->cmnd[0] = INQUIRY;
cmd->cmnd[4] = request_length;
@@ -3032,7 +3032,7 @@
#endif
/* Do a TUR to clear out any non-fatal transitional state */
ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
- cmd->sc_data_direction = SCSI_DATA_NONE;
+ cmd->sc_data_direction = DMA_NONE;
cmd->cmd_len = 6;
cmd->cmnd[0] = TEST_UNIT_READY;
}
@@ -3054,7 +3054,7 @@
free(targ->dv_buffer, M_DEVBUF);
targ->dv_buffer = malloc(AHC_REBD_LEN, M_DEVBUF, M_WAITOK);
ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
- cmd->sc_data_direction = SCSI_DATA_READ;
+ cmd->sc_data_direction = DMA_FROM_DEVICE;
cmd->cmd_len = 10;
cmd->cmnd[0] = READ_BUFFER;
cmd->cmnd[1] = 0x0b;
@@ -3076,7 +3076,7 @@
}
#endif
ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
- cmd->sc_data_direction = SCSI_DATA_WRITE;
+ cmd->sc_data_direction = DMA_TO_DEVICE;
cmd->cmd_len = 10;
cmd->cmnd[0] = WRITE_BUFFER;
cmd->cmnd[1] = 0x0a;
@@ -3098,7 +3098,7 @@
}
#endif
ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
- cmd->sc_data_direction = SCSI_DATA_READ;
+ cmd->sc_data_direction = DMA_FROM_DEVICE;
cmd->cmd_len = 10;
cmd->cmnd[0] = READ_BUFFER;
cmd->cmnd[1] = 0x0a;
@@ -3124,7 +3124,7 @@
}
#endif
ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
- cmd->sc_data_direction = SCSI_DATA_NONE;
+ cmd->sc_data_direction = DMA_NONE;
cmd->cmd_len = 6;
cmd->cmnd[0] = START_STOP_UNIT;
cmd->cmnd[4] = le | SSS_START;
@@ -3659,7 +3659,7 @@
cur_seg = (struct scatterlist *)cmd->request_buffer;
nseg = pci_map_sg(ahc->dev_softc, cur_seg, cmd->use_sg,
- scsi_to_pci_dma_dir(cmd->sc_data_direction));
+ cmd->sc_data_direction);
end_seg = cur_seg + nseg;
/* Copy the segments into the SG list. */
sg = scb->sg_list;
@@ -3703,7 +3703,7 @@
addr = pci_map_single(ahc->dev_softc,
cmd->request_buffer,
cmd->request_bufflen,
- scsi_to_pci_dma_dir(cmd->sc_data_direction));
+ cmd->sc_data_direction);
scb->platform_data->buf_busaddr = addr;
scb->sg_count = ahc_linux_map_seg(ahc, scb,
sg, addr,
diff --git a/drivers/scsi/aic7xxx/cam.h b/drivers/scsi/aic7xxx/cam.h
index d40ba07..26f17e3 100644
--- a/drivers/scsi/aic7xxx/cam.h
+++ b/drivers/scsi/aic7xxx/cam.h
@@ -103,9 +103,9 @@
} ac_code;
typedef enum {
- CAM_DIR_IN = SCSI_DATA_READ,
- CAM_DIR_OUT = SCSI_DATA_WRITE,
- CAM_DIR_NONE = SCSI_DATA_NONE
+ CAM_DIR_IN = DMA_FROM_DEVICE,
+ CAM_DIR_OUT = DMA_TO_DEVICE,
+ CAM_DIR_NONE = DMA_NONE,
} ccb_flags;
#endif /* _AIC7XXX_CAM_H */
