drm/i915/gen11: Program ICL_DPCLKA_CFGCR0 according to PHY
Although the register name implies that it operates on DDI's,
DPCLKA_CFGCR0_ICL actually needs to be programmed according to the PHY
that's in use. I.e., when using EHL's DDI-D on combo PHY A, the bits
described as "port A" in the bspec are what we need to set. The bspec
clarifies:
"[For EHL] DDID clock tied to DDIA clock, so DPCLKA_CFGCR0 DDIA
Clock Select chooses the PLL for both DDIA and DDID and drives
port A in all cases."
Also, since the CNL DPCLKA_CFGCR0 bit defines are still port-based, we
create separate ICL-specific defines that accept the PHY rather than
trying to share the same bit definitions between CNL and ICL.
v5: Make icl_dpclka_cfgcr0_clk_off() take phy rather than port. When
splitting the original patch the hunk to handle this wound up too
late in the series. (Sparse)
v6: Since we're already changing this code,
s/DPCLKA_CFGCR0_ICL/ICL_DPCLKA_CFGCR0/ for consistency. (Jose)
Bspec: 33148
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-3-matthew.d.roper@intel.com
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5898f59..d3fc575 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9697,17 +9697,21 @@ enum skl_power_gate {
* CNL Clocks
*/
#define DPCLKA_CFGCR0 _MMIO(0x6C200)
-#define DPCLKA_CFGCR0_ICL _MMIO(0x164280)
#define DPCLKA_CFGCR0_DDI_CLK_OFF(port) (1 << ((port) == PORT_F ? 23 : \
(port) + 10))
-#define ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(port) (1 << ((port) + 10))
-#define ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port) (1 << ((tc_port) == PORT_TC4 ? \
- 21 : (tc_port) + 12))
#define DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port) ((port) == PORT_F ? 21 : \
(port) * 2)
#define DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port) (3 << DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port))
#define DPCLKA_CFGCR0_DDI_CLK_SEL(pll, port) ((pll) << DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port))
+#define ICL_DPCLKA_CFGCR0 _MMIO(0x164280)
+#define ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy) (1 << _PICK(phy, 10, 11, 24))
+#define ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port) (1 << ((tc_port) == PORT_TC4 ? \
+ 21 : (tc_port) + 12))
+#define ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy) ((phy) * 2)
+#define ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy) (3 << ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy))
+#define ICL_DPCLKA_CFGCR0_DDI_CLK_SEL(pll, phy) ((pll) << ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy))
+
/* CNL PLL */
#define DPLL0_ENABLE 0x46010
#define DPLL1_ENABLE 0x46014
