// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Xbox gamepad driver
 *
 * Copyright (c) 2002 Marko Friedemann <mfr@bmx-chemnitz.de>
 *               2004 Oliver Schwartz <Oliver.Schwartz@gmx.de>,
 *                    Steven Toth <steve@toth.demon.co.uk>,
 *                    Franz Lehner <franz@caos.at>,
 *                    Ivan Hawkes <blackhawk@ivanhawkes.com>
 *               2005 Dominic Cerquetti <binary1230@yahoo.com>
 *               2006 Adam Buchbinder <adam.buchbinder@gmail.com>
 *               2007 Jan Kratochvil <honza@jikos.cz>
 *               2010 Christoph Fritz <chf.fritz@googlemail.com>
 *
 * This driver is based on:
 *  - information from     http://euc.jp/periphs/xbox-controller.ja.html
 *  - the iForce driver    drivers/char/joystick/iforce.c
 *  - the skeleton-driver  drivers/usb/usb-skeleton.c
 *  - Xbox 360 information http://www.free60.org/wiki/Gamepad
 *  - Xbox One information https://github.com/quantus/xbox-one-controller-protocol
 *
 * Thanks to:
 *  - ITO Takayuki for providing essential xpad information on his website
 *  - Vojtech Pavlik     - iforce driver / input subsystem
 *  - Greg Kroah-Hartman - usb-skeleton driver
 *  - Xbox Linux project - extra USB IDs
 *  - Pekka Pöyry (quantus) - Xbox One controller reverse-engineering
 *
 * TODO:
 *  - fine tune axes (especially trigger axes)
 *  - fix "analog" buttons (reported as digital now)
 *  - get rumble working
 *  - need USB IDs for other dance pads
 *
 * History:
 *
 * 2002-06-27 - 0.0.1 : first version, just said "XBOX HID controller"
 *
 * 2002-07-02 - 0.0.2 : basic working version
 *  - all axes and 9 of the 10 buttons work (german InterAct device)
 *  - the black button does not work
 *
 * 2002-07-14 - 0.0.3 : rework by Vojtech Pavlik
 *  - indentation fixes
 *  - usb + input init sequence fixes
 *
 * 2002-07-16 - 0.0.4 : minor changes, merge with Vojtech's v0.0.3
 *  - verified the lack of HID and report descriptors
 *  - verified that ALL buttons WORK
 *  - fixed d-pad to axes mapping
 *
 * 2002-07-17 - 0.0.5 : simplified d-pad handling
 *
 * 2004-10-02 - 0.0.6 : DDR pad support
 *  - borrowed from the Xbox Linux kernel
 *  - USB id's for commonly used dance pads are present
 *  - dance pads will map D-PAD to buttons, not axes
 *  - pass the module paramater 'dpad_to_buttons' to force
 *    the D-PAD to map to buttons if your pad is not detected
 *
 * Later changes can be tracked in SCM.
 */

#include <linux/bits.h>
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/rcupdate.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/module.h>
#include <linux/usb/input.h>
#include <linux/usb/quirks.h>

#define XPAD_PKT_LEN 64

/*
 * xbox d-pads should map to buttons, as is required for DDR pads
 * but we map them to axes when possible to simplify things
 */
#define MAP_DPAD_TO_BUTTONS		(1 << 0)
#define MAP_TRIGGERS_TO_BUTTONS		(1 << 1)
#define MAP_STICKS_TO_NULL		(1 << 2)
#define MAP_SELECT_BUTTON		(1 << 3)
#define MAP_PADDLES			(1 << 4)
#define MAP_PROFILE_BUTTON		(1 << 5)

#define DANCEPAD_MAP_CONFIG	(MAP_DPAD_TO_BUTTONS |			\
				MAP_TRIGGERS_TO_BUTTONS | MAP_STICKS_TO_NULL)

#define XTYPE_XBOX        0
#define XTYPE_XBOX360     1
#define XTYPE_XBOX360W    2
#define XTYPE_XBOXONE     3
#define XTYPE_UNKNOWN     4

/* Send power-off packet to xpad360w after holding the mode button for this many
 * seconds
 */
#define XPAD360W_POWEROFF_TIMEOUT 5

#define PKT_XB              0
#define PKT_XBE1            1
#define PKT_XBE2_FW_OLD     2
#define PKT_XBE2_FW_5_EARLY 3
#define PKT_XBE2_FW_5_11    4

static bool dpad_to_buttons;
module_param(dpad_to_buttons, bool, S_IRUGO);
MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");

static bool triggers_to_buttons;
module_param(triggers_to_buttons, bool, S_IRUGO);
MODULE_PARM_DESC(triggers_to_buttons, "Map triggers to buttons rather than axes for unknown pads");

static bool sticks_to_null;
module_param(sticks_to_null, bool, S_IRUGO);
MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads");

static bool auto_poweroff = true;
module_param(auto_poweroff, bool, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(auto_poweroff, "Power off wireless controllers on suspend");

static const struct xpad_device {
	u16 idVendor;
	u16 idProduct;
	char *name;
	u8 mapping;
	u8 xtype;
} xpad_device[] = {
	{ 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 },
	{ 0x03eb, 0xff01, "Wooting One (Legacy)", 0, XTYPE_XBOX360 },
	{ 0x03eb, 0xff02, "Wooting Two (Legacy)", 0, XTYPE_XBOX360 },
	{ 0x03f0, 0x038D, "HyperX Clutch", 0, XTYPE_XBOX360 },			/* wired */
	{ 0x03f0, 0x048D, "HyperX Clutch", 0, XTYPE_XBOX360 },			/* wireless */
	{ 0x03f0, 0x0495, "HyperX Clutch Gladiate", 0, XTYPE_XBOXONE },
	{ 0x03f0, 0x07A0, "HyperX Clutch Gladiate RGB", 0, XTYPE_XBOXONE },
	{ 0x03f0, 0x08B6, "HyperX Clutch Gladiate", 0, XTYPE_XBOXONE },		/* v2 */
	{ 0x03f0, 0x09B4, "HyperX Clutch Tanto", 0, XTYPE_XBOXONE },
	{ 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
	{ 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
	{ 0x044f, 0x0f10, "Thrustmaster Modena GT Wheel", 0, XTYPE_XBOX },
	{ 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
	{ 0x045e, 0x0288, "Microsoft Xbox Controller S v2", 0, XTYPE_XBOX },
	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
	{ 0x045e, 0x028f, "Microsoft X-Box 360 pad v2", 0, XTYPE_XBOX360 },
	{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
	{ 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
	{ 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE },
	{ 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", MAP_PADDLES, XTYPE_XBOXONE },
	{ 0x045e, 0x0b00, "Microsoft X-Box One Elite 2 pad", MAP_PADDLES, XTYPE_XBOXONE },
	{ 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE },
	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
	{ 0x045e, 0x0b0a, "Microsoft X-Box Adaptive Controller", MAP_PROFILE_BUTTON, XTYPE_XBOXONE },
	{ 0x045e, 0x0b12, "Microsoft Xbox Series S|X Controller", MAP_SELECT_BUTTON, XTYPE_XBOXONE },
	{ 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 },
	{ 0x046d, 0xc21e, "Logitech Gamepad F510", 0, XTYPE_XBOX360 },
	{ 0x046d, 0xc21f, "Logitech Gamepad F710", 0, XTYPE_XBOX360 },
	{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX },
	{ 0x046d, 0xca8a, "Logitech Precision Vibration Feedback Wheel", 0, XTYPE_XBOX },
	{ 0x046d, 0xcaa3, "Logitech DriveFx Racing Wheel", 0, XTYPE_XBOX360 },
	{ 0x056e, 0x2004, "Elecom JC-U3613M", 0, XTYPE_XBOX360 },
	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX },
	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX },
	{ 0x05fe, 0x3030, "Chic Controller", 0, XTYPE_XBOX },
	{ 0x05fe, 0x3031, "Chic Controller", 0, XTYPE_XBOX },
	{ 0x062a, 0x0020, "Logic3 Xbox GamePad", 0, XTYPE_XBOX },
	{ 0x062a, 0x0033, "Competition Pro Steering Wheel", 0, XTYPE_XBOX },
	{ 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX },
	{ 0x06a3, 0x0201, "Saitek Adrenalin", 0, XTYPE_XBOX },
	{ 0x06a3, 0xf51a, "Saitek P3600", 0, XTYPE_XBOX360 },
	{ 0x0738, 0x4506, "Mad Catz 4506 Wireless Controller", 0, XTYPE_XBOX },
	{ 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX },
	{ 0x0738, 0x4520, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
	{ 0x0738, 0x4522, "Mad Catz LumiCON", 0, XTYPE_XBOX },
	{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
	{ 0x0738, 0x4530, "Mad Catz Universal MC2 Racing Wheel and Pedals", 0, XTYPE_XBOX },
	{ 0x0738, 0x4536, "Mad Catz MicroCON", 0, XTYPE_XBOX },
	{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
	{ 0x0738, 0x4586, "Mad Catz MicroCon Wireless Controller", 0, XTYPE_XBOX },
	{ 0x0738, 0x4588, "Mad Catz Blaster", 0, XTYPE_XBOX },
	{ 0x0738, 0x45ff, "Mad Catz Beat Pad (w/ Handle)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x0738, 0x4718, "Mad Catz Street Fighter IV FightStick SE", 0, XTYPE_XBOX360 },
	{ 0x0738, 0x4726, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0738, 0x4736, "Mad Catz MicroCon Gamepad", 0, XTYPE_XBOX360 },
	{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 },
	{ 0x0738, 0x4743, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x0738, 0x4758, "Mad Catz Arcade Game Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x0738, 0x9871, "Mad Catz Portable Drum", 0, XTYPE_XBOX360 },
	{ 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 },
	{ 0x0738, 0xb738, "Mad Catz MVC2TE Stick 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
	{ 0x0738, 0xcb02, "Saitek Cyborg Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x0738, 0xcb03, "Saitek P3200 Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x0738, 0xcb29, "Saitek Aviator Stick AV8R02", 0, XTYPE_XBOX360 },
	{ 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 },
	{ 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 },
	{ 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX },
	{ 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX },
	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
	{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
	{ 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX },
	{ 0x0e4c, 0x1103, "Radica Gamester Reflex", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX },
	{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX },
	{ 0x0e4c, 0x3510, "Radica Gamester", 0, XTYPE_XBOX },
	{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
	{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
	{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
	{ 0x0e6f, 0x0008, "After Glow Pro Controller", 0, XTYPE_XBOX },
	{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0113, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x011f, "Rock Candy Gamepad Wired Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0131, "PDP EA Sports Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0133, "Xbox 360 Wired Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0139, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x013a, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0147, "PDP Marvel Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x015c, "PDP Xbox One Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0161, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0162, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0163, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0164, "PDP Battlefield One", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0165, "PDP Titanfall 2", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0246, "Rock Candy Gamepad for Xbox One 2015", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a0, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a1, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a2, "PDP Wired Controller for Xbox One - Crimson Red", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a4, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a6, "PDP Wired Controller for Xbox One - Camo Series", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a7, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02a8, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02ab, "PDP Controller for Xbox One", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02ad, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02b3, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x02b8, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0346, "Rock Candy Gamepad for Xbox One 2016", 0, XTYPE_XBOXONE },
	{ 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0413, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0x0501, "PDP Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x0e6f, 0xf900, "PDP Afterglow AX.1", 0, XTYPE_XBOX360 },
	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
	{ 0x0e8f, 0x3008, "Generic xbox control (dealextreme)", 0, XTYPE_XBOX },
	{ 0x0f0d, 0x000a, "Hori Co. DOA4 FightStick", 0, XTYPE_XBOX360 },
	{ 0x0f0d, 0x000c, "Hori PadEX Turbo", 0, XTYPE_XBOX360 },
	{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0f0d, 0x001b, "Hori Real Arcade Pro VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0f0d, 0x0063, "Hori Real Arcade Pro Hayabusa (USA) Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
	{ 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE },
	{ 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
	{ 0x0f0d, 0x00c5, "Hori Fighting Commander ONE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
	{ 0x0f0d, 0x00dc, "HORIPAD FPS for Nintendo Switch", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX },
	{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
	{ 0x1038, 0x1430, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
	{ 0x1038, 0x1431, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
	{ 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
	{ 0x11ff, 0x0511, "PXN V900", 0, XTYPE_XBOX360 },
	{ 0x1209, 0x2882, "Ardwiino Controller", 0, XTYPE_XBOX360 },
	{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 },
	{ 0x12ab, 0x0303, "Mortal Kombat Klassic FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
	{ 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 },
	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
	{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
	{ 0x1532, 0x0a29, "Razer Wolverine V2", 0, XTYPE_XBOXONE },
	{ 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 },
	{ 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
	{ 0x15e4, 0x3f10, "Batarang Xbox 360 controller", 0, XTYPE_XBOX360 },
	{ 0x162e, 0xbeef, "Joytech Neo-Se Take2", 0, XTYPE_XBOX360 },
	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
	{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
	{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
	{ 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 },
	{ 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf018, "Mad Catz Street Fighter IV SE Fighting Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf019, "Mad Catz Brawlstick for Xbox 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf021, "Mad Cats Ghost Recon FS GamePad", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf023, "MLG Pro Circuit Controller (Xbox)", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf025, "Mad Catz Call Of Duty", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf027, "Mad Catz FPS Pro", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf02e, "Mad Catz Fightpad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf030, "Mad Catz Xbox 360 MC2 MicroCon Racing Wheel", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf036, "Mad Catz MicroCon GamePad Pro", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf038, "Street Fighter IV FightStick TE", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf039, "Mad Catz MvC2 TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf03a, "Mad Catz SFxT Fightstick Pro", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf03d, "Street Fighter IV Arcade Stick TE - Chun Li", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf03e, "Mad Catz MLG FightStick TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf03f, "Mad Catz FightStick SoulCaliber", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf042, "Mad Catz FightStick TES+", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf080, "Mad Catz FightStick TE2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf501, "HoriPad EX2 Turbo", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf502, "Hori Real Arcade Pro.VX SA", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf503, "Hori Fighting Stick VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf504, "Hori Real Arcade Pro. EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf505, "Hori Fighting Stick EX2B", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xf506, "Hori Real Arcade Pro.EX Premium VLX", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf900, "Harmonix Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf904, "PDP Versus Fighting Pad", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xf906, "MortalKombat FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 },
	{ 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 },
	{ 0x20d6, 0x2001, "BDA Xbox Series X Wired Controller", 0, XTYPE_XBOXONE },
	{ 0x20d6, 0x2009, "PowerA Enhanced Wired Controller for Xbox Series X|S", 0, XTYPE_XBOXONE },
	{ 0x20d6, 0x281f, "PowerA Wired Controller For Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x2e24, 0x0652, "Hyperkin Duke X-Box One pad", 0, XTYPE_XBOXONE },
	{ 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x530a, "Xbox 360 Pro EX Controller", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x531a, "PowerA Pro Ex", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5397, "FUS1ON Tournament Controller", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x541a, "PowerA Xbox One Mini Wired Controller", 0, XTYPE_XBOXONE },
	{ 0x24c6, 0x542a, "Xbox ONE spectra", 0, XTYPE_XBOXONE },
	{ 0x24c6, 0x543a, "PowerA Xbox One wired controller", 0, XTYPE_XBOXONE },
	{ 0x24c6, 0x5500, "Hori XBOX 360 EX 2 with Turbo", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5501, "Hori Real Arcade Pro VX-SA", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5510, "Hori Fighting Commander ONE (Xbox 360/PC Mode)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
	{ 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE },
	{ 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE },
	{ 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
	{ 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
	{ 0x2563, 0x058d, "OneXPlayer Gamepad", 0, XTYPE_XBOX360 },
	{ 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE },
	{ 0x2dc8, 0x3106, "8BitDo Pro 2 Wired Controller", 0, XTYPE_XBOX360 },
	{ 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 },
	{ 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 },
	{ 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 },
	{ 0x31e3, 0x1220, "Wooting Two HE", 0, XTYPE_XBOX360 },
	{ 0x31e3, 0x1300, "Wooting 60HE (AVR)", 0, XTYPE_XBOX360 },
	{ 0x31e3, 0x1310, "Wooting 60HE (ARM)", 0, XTYPE_XBOX360 },
	{ 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },
	{ 0x3537, 0x1004, "GameSir T4 Kaleid", 0, XTYPE_XBOX360 },
	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};

/* buttons shared with xbox and xbox360 */
static const signed short xpad_common_btn[] = {
	BTN_A, BTN_B, BTN_X, BTN_Y,			/* "analog" buttons */
	BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR,	/* start/back/sticks */
	-1						/* terminating entry */
};

/* original xbox controllers only */
static const signed short xpad_btn[] = {
	BTN_C, BTN_Z,		/* "analog" buttons */
	-1			/* terminating entry */
};

/* used when dpad is mapped to buttons */
static const signed short xpad_btn_pad[] = {
	BTN_TRIGGER_HAPPY1, BTN_TRIGGER_HAPPY2,		/* d-pad left, right */
	BTN_TRIGGER_HAPPY3, BTN_TRIGGER_HAPPY4,		/* d-pad up, down */
	-1				/* terminating entry */
};

/* used when triggers are mapped to buttons */
static const signed short xpad_btn_triggers[] = {
	BTN_TL2, BTN_TR2,		/* triggers left/right */
	-1
};

static const signed short xpad360_btn[] = {  /* buttons for x360 controller */
	BTN_TL, BTN_TR,		/* Button LB/RB */
	BTN_MODE,		/* The big X button */
	-1
};

static const signed short xpad_abs[] = {
	ABS_X, ABS_Y,		/* left stick */
	ABS_RX, ABS_RY,		/* right stick */
	-1			/* terminating entry */
};

/* used when dpad is mapped to axes */
static const signed short xpad_abs_pad[] = {
	ABS_HAT0X, ABS_HAT0Y,	/* d-pad axes */
	-1			/* terminating entry */
};

/* used when triggers are mapped to axes */
static const signed short xpad_abs_triggers[] = {
	ABS_Z, ABS_RZ,		/* triggers left/right */
	-1
};

/* used when the controller has extra paddle buttons */
static const signed short xpad_btn_paddles[] = {
	BTN_TRIGGER_HAPPY5, BTN_TRIGGER_HAPPY6, /* paddle upper right, lower right */
	BTN_TRIGGER_HAPPY7, BTN_TRIGGER_HAPPY8, /* paddle upper left, lower left */
	-1						/* terminating entry */
};

/*
 * Xbox 360 has a vendor-specific class, so we cannot match it with only
 * USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
 * match against vendor id as well. Wired Xbox 360 devices have protocol 1,
 * wireless controllers have protocol 129.
 */
#define XPAD_XBOX360_VENDOR_PROTOCOL(vend, pr) \
	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
	.idVendor = (vend), \
	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
	.bInterfaceSubClass = 93, \
	.bInterfaceProtocol = (pr)
#define XPAD_XBOX360_VENDOR(vend) \
	{ XPAD_XBOX360_VENDOR_PROTOCOL((vend), 1) }, \
	{ XPAD_XBOX360_VENDOR_PROTOCOL((vend), 129) }

/* The Xbox One controller uses subclass 71 and protocol 208. */
#define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \
	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
	.idVendor = (vend), \
	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
	.bInterfaceSubClass = 71, \
	.bInterfaceProtocol = (pr)
#define XPAD_XBOXONE_VENDOR(vend) \
	{ XPAD_XBOXONE_VENDOR_PROTOCOL((vend), 208) }

static const struct usb_device_id xpad_table[] = {
	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* Xbox USB-IF not-approved class */
	XPAD_XBOX360_VENDOR(0x0079),		/* GPD Win 2 controller */
	XPAD_XBOX360_VENDOR(0x03eb),		/* Wooting Keyboards (Legacy) */
	XPAD_XBOX360_VENDOR(0x03f0),		/* HP HyperX Xbox 360 controllers */
	XPAD_XBOXONE_VENDOR(0x03f0),		/* HP HyperX Xbox One controllers */
	XPAD_XBOX360_VENDOR(0x044f),		/* Thrustmaster Xbox 360 controllers */
	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft Xbox 360 controllers */
	XPAD_XBOXONE_VENDOR(0x045e),		/* Microsoft Xbox One controllers */
	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech Xbox 360-style controllers */
	XPAD_XBOX360_VENDOR(0x056e),		/* Elecom JC-U3613M */
	XPAD_XBOX360_VENDOR(0x06a3),		/* Saitek P3600 */
	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz Xbox 360 controllers */
	{ USB_DEVICE(0x0738, 0x4540) },		/* Mad Catz Beat Pad */
	XPAD_XBOXONE_VENDOR(0x0738),		/* Mad Catz FightStick TE 2 */
	XPAD_XBOX360_VENDOR(0x07ff),		/* Mad Catz Gamepad */
	XPAD_XBOX360_VENDOR(0x0c12),		/* Zeroplus X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f Xbox 360 controllers */
	XPAD_XBOXONE_VENDOR(0x0e6f),		/* 0x0e6f Xbox One controllers */
	XPAD_XBOX360_VENDOR(0x0f0d),		/* Hori controllers */
	XPAD_XBOXONE_VENDOR(0x0f0d),		/* Hori controllers */
	XPAD_XBOX360_VENDOR(0x1038),		/* SteelSeries controllers */
	XPAD_XBOXONE_VENDOR(0x10f5),		/* Turtle Beach Controllers */
	XPAD_XBOX360_VENDOR(0x11c9),		/* Nacon GC100XF */
	XPAD_XBOX360_VENDOR(0x11ff),		/* PXN V900 */
	XPAD_XBOX360_VENDOR(0x1209),		/* Ardwiino Controllers */
	XPAD_XBOX360_VENDOR(0x12ab),		/* Xbox 360 dance pads */
	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane Xbox 360 controllers */
	XPAD_XBOX360_VENDOR(0x146b),		/* Bigben Interactive controllers */
	XPAD_XBOX360_VENDOR(0x1532),		/* Razer Sabertooth */
	XPAD_XBOXONE_VENDOR(0x1532),		/* Razer Wildcat */
	XPAD_XBOX360_VENDOR(0x15e4),		/* Numark Xbox 360 controllers */
	XPAD_XBOX360_VENDOR(0x162e),		/* Joytech Xbox 360 controllers */
	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
	XPAD_XBOX360_VENDOR(0x17ef),		/* Lenovo */
	XPAD_XBOX360_VENDOR(0x1949),		/* Amazon controllers */
	XPAD_XBOX360_VENDOR(0x1bad),		/* Harmonix Rock Band guitar and drums */
	XPAD_XBOX360_VENDOR(0x20d6),		/* PowerA controllers */
	XPAD_XBOXONE_VENDOR(0x20d6),		/* PowerA controllers */
	XPAD_XBOX360_VENDOR(0x24c6),		/* PowerA controllers */
	XPAD_XBOXONE_VENDOR(0x24c6),		/* PowerA controllers */
	XPAD_XBOX360_VENDOR(0x2563),		/* OneXPlayer Gamepad */
	XPAD_XBOX360_VENDOR(0x260d),		/* Dareu H101 */
	XPAD_XBOX360_VENDOR(0x2c22),		/* Qanba Controllers */
	XPAD_XBOX360_VENDOR(0x2dc8),            /* 8BitDo Pro 2 Wired Controller */
	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Pro 2 Wired Controller for Xbox */
	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Duke Xbox One pad */
	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir controllers */
	XPAD_XBOX360_VENDOR(0x31e3),		/* Wooting Keyboards */
	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
	XPAD_XBOX360_VENDOR(0x3537),		/* GameSir Controllers */
	XPAD_XBOXONE_VENDOR(0x3537),		/* GameSir Controllers */
	{ }
};

MODULE_DEVICE_TABLE(usb, xpad_table);

struct xboxone_init_packet {
	u16 idVendor;
	u16 idProduct;
	const u8 *data;
	u8 len;
};

#define XBOXONE_INIT_PKT(_vid, _pid, _data)		\
	{						\
		.idVendor	= (_vid),		\
		.idProduct	= (_pid),		\
		.data		= (_data),		\
		.len		= ARRAY_SIZE(_data),	\
	}

/*
 * starting with xbox one, the game input protocol is used
 * magic numbers are taken from
 * - https://github.com/xpadneo/gip-dissector/blob/main/src/gip-dissector.lua
 * - https://github.com/medusalix/xone/blob/master/bus/protocol.c
 */
#define GIP_CMD_ACK      0x01
#define GIP_CMD_IDENTIFY 0x04
#define GIP_CMD_POWER    0x05
#define GIP_CMD_AUTHENTICATE 0x06
#define GIP_CMD_VIRTUAL_KEY  0x07
#define GIP_CMD_RUMBLE   0x09
#define GIP_CMD_LED      0x0a
#define GIP_CMD_FIRMWARE 0x0c
#define GIP_CMD_INPUT    0x20

#define GIP_SEQ0 0x00

#define GIP_OPT_ACK      0x10
#define GIP_OPT_INTERNAL 0x20

/*
 * length of the command payload encoded with
 * https://en.wikipedia.org/wiki/LEB128
 * which is a no-op for N < 128
 */
#define GIP_PL_LEN(N) (N)

/*
 * payload specific defines
 */
#define GIP_PWR_ON 0x00
#define GIP_LED_ON 0x01

#define GIP_MOTOR_R  BIT(0)
#define GIP_MOTOR_L  BIT(1)
#define GIP_MOTOR_RT BIT(2)
#define GIP_MOTOR_LT BIT(3)
#define GIP_MOTOR_ALL (GIP_MOTOR_R | GIP_MOTOR_L | GIP_MOTOR_RT | GIP_MOTOR_LT)

#define GIP_WIRED_INTF_DATA 0
#define GIP_WIRED_INTF_AUDIO 1

/*
 * This packet is required for all Xbox One pads with 2015
 * or later firmware installed (or present from the factory).
 */
static const u8 xboxone_power_on[] = {
	GIP_CMD_POWER, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(1), GIP_PWR_ON
};

/*
 * This packet is required for Xbox One S (0x045e:0x02ea)
 * and Xbox One Elite Series 2 (0x045e:0x0b00) pads to
 * initialize the controller that was previously used in
 * Bluetooth mode.
 */
static const u8 xboxone_s_init[] = {
	GIP_CMD_POWER, GIP_OPT_INTERNAL, GIP_SEQ0, 0x0f, 0x06
};

/*
 * This packet is required to get additional input data
 * from Xbox One Elite Series 2 (0x045e:0x0b00) pads.
 * We mostly do this right now to get paddle data
 */
static const u8 extra_input_packet_init[] = {
	0x4d, 0x10, 0x01, 0x02, 0x07, 0x00
};

/*
 * This packet is required for the Titanfall 2 Xbox One pads
 * (0x0e6f:0x0165) to finish initialization and for Hori pads
 * (0x0f0d:0x0067) to make the analog sticks work.
 */
static const u8 xboxone_hori_ack_id[] = {
	GIP_CMD_ACK, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(9),
	0x00, GIP_CMD_IDENTIFY, GIP_OPT_INTERNAL, 0x3a, 0x00, 0x00, 0x00, 0x80, 0x00
};

/*
 * This packet is required for most (all?) of the PDP pads to start
 * sending input reports. These pads include: (0x0e6f:0x02ab),
 * (0x0e6f:0x02a4), (0x0e6f:0x02a6).
 */
static const u8 xboxone_pdp_led_on[] = {
	GIP_CMD_LED, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(3), 0x00, GIP_LED_ON, 0x14
};

/*
 * This packet is required for most (all?) of the PDP pads to start
 * sending input reports. These pads include: (0x0e6f:0x02ab),
 * (0x0e6f:0x02a4), (0x0e6f:0x02a6).
 */
static const u8 xboxone_pdp_auth[] = {
	GIP_CMD_AUTHENTICATE, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(2), 0x01, 0x00
};

/*
 * A specific rumble packet is required for some PowerA pads to start
 * sending input reports. One of those pads is (0x24c6:0x543a).
 */
static const u8 xboxone_rumblebegin_init[] = {
	GIP_CMD_RUMBLE, 0x00, GIP_SEQ0, GIP_PL_LEN(9),
	0x00, GIP_MOTOR_ALL, 0x00, 0x00, 0x1D, 0x1D, 0xFF, 0x00, 0x00
};

/*
 * A rumble packet with zero FF intensity will immediately
 * terminate the rumbling required to init PowerA pads.
 * This should happen fast enough that the motors don't
 * spin up to enough speed to actually vibrate the gamepad.
 */
static const u8 xboxone_rumbleend_init[] = {
	GIP_CMD_RUMBLE, 0x00, GIP_SEQ0, GIP_PL_LEN(9),
	0x00, GIP_MOTOR_ALL, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

/*
 * This specifies the selection of init packets that a gamepad
 * will be sent on init *and* the order in which they will be
 * sent. The correct sequence number will be added when the
 * packet is going to be sent.
 */
static const struct xboxone_init_packet xboxone_init_packets[] = {
	XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_ack_id),
	XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_ack_id),
	XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_power_on),
	XBOXONE_INIT_PKT(0x045e, 0x02ea, xboxone_s_init),
	XBOXONE_INIT_PKT(0x045e, 0x0b00, xboxone_s_init),
	XBOXONE_INIT_PKT(0x045e, 0x0b00, extra_input_packet_init),
	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_led_on),
	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_auth),
	XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
	XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init),
	XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init),
	XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumbleend_init),
	XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumbleend_init),
	XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumbleend_init),
};

struct xpad_output_packet {
	u8 data[XPAD_PKT_LEN];
	u8 len;
	bool pending;
};

#define XPAD_OUT_CMD_IDX	0
#define XPAD_OUT_FF_IDX		1
#define XPAD_OUT_LED_IDX	(1 + IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF))
#define XPAD_NUM_OUT_PACKETS	(1 + \
				 IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF) + \
				 IS_ENABLED(CONFIG_JOYSTICK_XPAD_LEDS))

struct usb_xpad {
	struct input_dev *dev;		/* input device interface */
	struct input_dev __rcu *x360w_dev;
	struct usb_device *udev;	/* usb device */
	struct usb_interface *intf;	/* usb interface */

	bool pad_present;
	bool input_created;

	struct urb *irq_in;		/* urb for interrupt in report */
	unsigned char *idata;		/* input data */
	dma_addr_t idata_dma;

	struct urb *irq_out;		/* urb for interrupt out report */
	struct usb_anchor irq_out_anchor;
	bool irq_out_active;		/* we must not use an active URB */
	u8 odata_serial;		/* serial number for xbox one protocol */
	unsigned char *odata;		/* output data */
	dma_addr_t odata_dma;
	spinlock_t odata_lock;

	struct xpad_output_packet out_packets[XPAD_NUM_OUT_PACKETS];
	int last_out_packet;
	int init_seq;

#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
	struct xpad_led *led;
#endif

	char phys[64];			/* physical device path */

	int mapping;			/* map d-pad to buttons or to axes */
	int xtype;			/* type of xbox device */
	int packet_type;		/* type of the extended packet */
	int pad_nr;			/* the order x360 pads were attached */
	const char *name;		/* name of the device */
	struct work_struct work;	/* init/remove device from callback */
	time64_t mode_btn_down_ts;
};

static int xpad_init_input(struct usb_xpad *xpad);
static void xpad_deinit_input(struct usb_xpad *xpad);
static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num);
static void xpad360w_poweroff_controller(struct usb_xpad *xpad);

/*
 *	xpad_process_packet
 *
 *	Completes a request by converting the data into events for the
 *	input subsystem.
 *
 *	The used report descriptor was taken from ITO Takayuki's website:
 *	 http://euc.jp/periphs/xbox-controller.ja.html
 */
static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
	struct input_dev *dev = xpad->dev;

	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
		/* left stick */
		input_report_abs(dev, ABS_X,
				 (__s16) le16_to_cpup((__le16 *)(data + 12)));
		input_report_abs(dev, ABS_Y,
				 ~(__s16) le16_to_cpup((__le16 *)(data + 14)));

		/* right stick */
		input_report_abs(dev, ABS_RX,
				 (__s16) le16_to_cpup((__le16 *)(data + 16)));
		input_report_abs(dev, ABS_RY,
				 ~(__s16) le16_to_cpup((__le16 *)(data + 18)));
	}

	/* triggers left/right */
	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
		input_report_key(dev, BTN_TL2, data[10]);
		input_report_key(dev, BTN_TR2, data[11]);
	} else {
		input_report_abs(dev, ABS_Z, data[10]);
		input_report_abs(dev, ABS_RZ, data[11]);
	}

	/* digital pad */
	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
		/* dpad as buttons (left, right, up, down) */
		input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & BIT(2));
		input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & BIT(3));
		input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & BIT(0));
		input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & BIT(1));
	} else {
		input_report_abs(dev, ABS_HAT0X,
				 !!(data[2] & 0x08) - !!(data[2] & 0x04));
		input_report_abs(dev, ABS_HAT0Y,
				 !!(data[2] & 0x02) - !!(data[2] & 0x01));
	}

	/* start/back buttons and stick press left/right */
	input_report_key(dev, BTN_START,  data[2] & BIT(4));
	input_report_key(dev, BTN_SELECT, data[2] & BIT(5));
	input_report_key(dev, BTN_THUMBL, data[2] & BIT(6));
	input_report_key(dev, BTN_THUMBR, data[2] & BIT(7));

	/* "analog" buttons A, B, X, Y */
	input_report_key(dev, BTN_A, data[4]);
	input_report_key(dev, BTN_B, data[5]);
	input_report_key(dev, BTN_X, data[6]);
	input_report_key(dev, BTN_Y, data[7]);

	/* "analog" buttons black, white */
	input_report_key(dev, BTN_C, data[8]);
	input_report_key(dev, BTN_Z, data[9]);


	input_sync(dev);
}

/*
 *	xpad360_process_packet
 *
 *	Completes a request by converting the data into events for the
 *	input subsystem. It is version for xbox 360 controller
 *
 *	The used report descriptor was taken from:
 *		http://www.free60.org/wiki/Gamepad
 */

static void xpad360_process_packet(struct usb_xpad *xpad, struct input_dev *dev,
				   u16 cmd, unsigned char *data)
{
	/* valid pad data */
	if (data[0] != 0x00)
		return;

	/* digital pad */
	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
		/* dpad as buttons (left, right, up, down) */
		input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & BIT(2));
		input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & BIT(3));
		input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & BIT(0));
		input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & BIT(1));
	}

	/*
	 * This should be a simple else block. However historically
	 * xbox360w has mapped DPAD to buttons while xbox360 did not. This
	 * made no sense, but now we can not just switch back and have to
	 * support both behaviors.
	 */
	if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
	    xpad->xtype == XTYPE_XBOX360W) {
		input_report_abs(dev, ABS_HAT0X,
				 !!(data[2] & 0x08) - !!(data[2] & 0x04));
		input_report_abs(dev, ABS_HAT0Y,
				 !!(data[2] & 0x02) - !!(data[2] & 0x01));
	}

	/* start/back buttons */
	input_report_key(dev, BTN_START,  data[2] & BIT(4));
	input_report_key(dev, BTN_SELECT, data[2] & BIT(5));

	/* stick press left/right */
	input_report_key(dev, BTN_THUMBL, data[2] & BIT(6));
	input_report_key(dev, BTN_THUMBR, data[2] & BIT(7));

	/* buttons A,B,X,Y,TL,TR and MODE */
	input_report_key(dev, BTN_A,	data[3] & BIT(4));
	input_report_key(dev, BTN_B,	data[3] & BIT(5));
	input_report_key(dev, BTN_X,	data[3] & BIT(6));
	input_report_key(dev, BTN_Y,	data[3] & BIT(7));
	input_report_key(dev, BTN_TL,	data[3] & BIT(0));
	input_report_key(dev, BTN_TR,	data[3] & BIT(1));
	input_report_key(dev, BTN_MODE,	data[3] & BIT(2));

	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
		/* left stick */
		input_report_abs(dev, ABS_X,
				 (__s16) le16_to_cpup((__le16 *)(data + 6)));
		input_report_abs(dev, ABS_Y,
				 ~(__s16) le16_to_cpup((__le16 *)(data + 8)));

		/* right stick */
		input_report_abs(dev, ABS_RX,
				 (__s16) le16_to_cpup((__le16 *)(data + 10)));
		input_report_abs(dev, ABS_RY,
				 ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
	}

	/* triggers left/right */
	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
		input_report_key(dev, BTN_TL2, data[4]);
		input_report_key(dev, BTN_TR2, data[5]);
	} else {
		input_report_abs(dev, ABS_Z, data[4]);
		input_report_abs(dev, ABS_RZ, data[5]);
	}

	input_sync(dev);

	/* XBOX360W controllers can't be turned off without driver assistance */
	if (xpad->xtype == XTYPE_XBOX360W) {
		if (xpad->mode_btn_down_ts > 0 && xpad->pad_present &&
		    ((ktime_get_seconds() - xpad->mode_btn_down_ts) >=
		     XPAD360W_POWEROFF_TIMEOUT)) {
			xpad360w_poweroff_controller(xpad);
			xpad->mode_btn_down_ts = 0;
			return;
		}

		/* mode button down/up */
		if (data[3] & BIT(2))
			xpad->mode_btn_down_ts = ktime_get_seconds();
		else
			xpad->mode_btn_down_ts = 0;
	}
}

static void xpad_presence_work(struct work_struct *work)
{
	struct usb_xpad *xpad = container_of(work, struct usb_xpad, work);
	int error;

	if (xpad->pad_present) {
		error = xpad_init_input(xpad);
		if (error) {
			/* complain only, not much else we can do here */
			dev_err(&xpad->dev->dev,
				"unable to init device: %d\n", error);
		} else {
			rcu_assign_pointer(xpad->x360w_dev, xpad->dev);
		}
	} else {
		RCU_INIT_POINTER(xpad->x360w_dev, NULL);
		synchronize_rcu();
		/*
		 * Now that we are sure xpad360w_process_packet is not
		 * using input device we can get rid of it.
		 */
		xpad_deinit_input(xpad);
	}
}

/*
 * xpad360w_process_packet
 *
 * Completes a request by converting the data into events for the
 * input subsystem. It is version for xbox 360 wireless controller.
 *
 * Byte.Bit
 * 00.1 - Status change: The controller or headset has connected/disconnected
 *                       Bits 01.7 and 01.6 are valid
 * 01.7 - Controller present
 * 01.6 - Headset present
 * 01.1 - Pad state (Bytes 4+) valid
 *
 */
static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
	struct input_dev *dev;
	bool present;

	/* Presence change */
	if (data[0] & 0x08) {
		present = (data[1] & 0x80) != 0;

		if (xpad->pad_present != present) {
			xpad->pad_present = present;
			schedule_work(&xpad->work);
		}
	}

	/* Valid pad data */
	if (data[1] != 0x1)
		return;

	rcu_read_lock();
	dev = rcu_dereference(xpad->x360w_dev);
	if (dev)
		xpad360_process_packet(xpad, dev, cmd, &data[4]);
	rcu_read_unlock();
}

/*
 *	xpadone_process_packet
 *
 *	Completes a request by converting the data into events for the
 *	input subsystem. This version is for the Xbox One controller.
 *
 *	The report format was gleaned from
 *	https://github.com/kylelemons/xbox/blob/master/xbox.go
 */
static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
	struct input_dev *dev = xpad->dev;
	bool do_sync = false;

	/* the xbox button has its own special report */
	if (data[0] == GIP_CMD_VIRTUAL_KEY) {
		/*
		 * The Xbox One S controller requires these reports to be
		 * acked otherwise it continues sending them forever and
		 * won't report further mode button events.
		 */
		if (data[1] == (GIP_OPT_ACK | GIP_OPT_INTERNAL))
			xpadone_ack_mode_report(xpad, data[2]);

		input_report_key(dev, BTN_MODE, data[4] & GENMASK(1, 0));
		input_sync(dev);

		do_sync = true;
	} else if (data[0] == GIP_CMD_FIRMWARE) {
		/* Some packet formats force us to use this separate to poll paddle inputs */
		if (xpad->packet_type == PKT_XBE2_FW_5_11) {
			/* Mute paddles if controller is in a custom profile slot
			 * Checked by looking at the active profile slot to
			 * verify it's the default slot
			 */
			if (data[19] != 0)
				data[18] = 0;

			/* Elite Series 2 split packet paddle bits */
			input_report_key(dev, BTN_TRIGGER_HAPPY5, data[18] & BIT(0));
			input_report_key(dev, BTN_TRIGGER_HAPPY6, data[18] & BIT(1));
			input_report_key(dev, BTN_TRIGGER_HAPPY7, data[18] & BIT(2));
			input_report_key(dev, BTN_TRIGGER_HAPPY8, data[18] & BIT(3));

			do_sync = true;
		}
	} else if (data[0] == GIP_CMD_INPUT) { /* The main valid packet type for inputs */
		/* menu/view buttons */
		input_report_key(dev, BTN_START,  data[4] & BIT(2));
		input_report_key(dev, BTN_SELECT, data[4] & BIT(3));
		if (xpad->mapping & MAP_SELECT_BUTTON)
			input_report_key(dev, KEY_RECORD, data[22] & BIT(0));

		/* buttons A,B,X,Y */
		input_report_key(dev, BTN_A,	data[4] & BIT(4));
		input_report_key(dev, BTN_B,	data[4] & BIT(5));
		input_report_key(dev, BTN_X,	data[4] & BIT(6));
		input_report_key(dev, BTN_Y,	data[4] & BIT(7));

		/* digital pad */
		if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
			/* dpad as buttons (left, right, up, down) */
			input_report_key(dev, BTN_TRIGGER_HAPPY1, data[5] & BIT(2));
			input_report_key(dev, BTN_TRIGGER_HAPPY2, data[5] & BIT(3));
			input_report_key(dev, BTN_TRIGGER_HAPPY3, data[5] & BIT(0));
			input_report_key(dev, BTN_TRIGGER_HAPPY4, data[5] & BIT(1));
		} else {
			input_report_abs(dev, ABS_HAT0X,
					!!(data[5] & 0x08) - !!(data[5] & 0x04));
			input_report_abs(dev, ABS_HAT0Y,
					!!(data[5] & 0x02) - !!(data[5] & 0x01));
		}

		/* TL/TR */
		input_report_key(dev, BTN_TL,	data[5] & BIT(4));
		input_report_key(dev, BTN_TR,	data[5] & BIT(5));

		/* stick press left/right */
		input_report_key(dev, BTN_THUMBL, data[5] & BIT(6));
		input_report_key(dev, BTN_THUMBR, data[5] & BIT(7));

		if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
			/* left stick */
			input_report_abs(dev, ABS_X,
					(__s16) le16_to_cpup((__le16 *)(data + 10)));
			input_report_abs(dev, ABS_Y,
					~(__s16) le16_to_cpup((__le16 *)(data + 12)));

			/* right stick */
			input_report_abs(dev, ABS_RX,
					(__s16) le16_to_cpup((__le16 *)(data + 14)));
			input_report_abs(dev, ABS_RY,
					~(__s16) le16_to_cpup((__le16 *)(data + 16)));
		}

		/* triggers left/right */
		if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
			input_report_key(dev, BTN_TL2,
					(__u16) le16_to_cpup((__le16 *)(data + 6)));
			input_report_key(dev, BTN_TR2,
					(__u16) le16_to_cpup((__le16 *)(data + 8)));
		} else {
			input_report_abs(dev, ABS_Z,
					(__u16) le16_to_cpup((__le16 *)(data + 6)));
			input_report_abs(dev, ABS_RZ,
					(__u16) le16_to_cpup((__le16 *)(data + 8)));
		}

		/* Profile button has a value of 0-3, so it is reported as an axis */
		if (xpad->mapping & MAP_PROFILE_BUTTON)
			input_report_abs(dev, ABS_PROFILE, data[34]);

		/* paddle handling */
		/* based on SDL's SDL_hidapi_xboxone.c */
		if (xpad->mapping & MAP_PADDLES) {
			if (xpad->packet_type == PKT_XBE1) {
				/* Mute paddles if controller has a custom mapping applied.
				 * Checked by comparing the current mapping
				 * config against the factory mapping config
				 */
				if (memcmp(&data[4], &data[18], 2) != 0)
					data[32] = 0;

				/* OG Elite Series Controller paddle bits */
				input_report_key(dev, BTN_TRIGGER_HAPPY5, data[32] & BIT(1));
				input_report_key(dev, BTN_TRIGGER_HAPPY6, data[32] & BIT(3));
				input_report_key(dev, BTN_TRIGGER_HAPPY7, data[32] & BIT(0));
				input_report_key(dev, BTN_TRIGGER_HAPPY8, data[32] & BIT(2));
			} else if (xpad->packet_type == PKT_XBE2_FW_OLD) {
				/* Mute paddles if controller has a custom mapping applied.
				 * Checked by comparing the current mapping
				 * config against the factory mapping config
				 */
				if (data[19] != 0)
					data[18] = 0;

				/* Elite Series 2 4.x firmware paddle bits */
				input_report_key(dev, BTN_TRIGGER_HAPPY5, data[18] & BIT(0));
				input_report_key(dev, BTN_TRIGGER_HAPPY6, data[18] & BIT(1));
				input_report_key(dev, BTN_TRIGGER_HAPPY7, data[18] & BIT(2));
				input_report_key(dev, BTN_TRIGGER_HAPPY8, data[18] & BIT(3));
			} else if (xpad->packet_type == PKT_XBE2_FW_5_EARLY) {
				/* Mute paddles if controller has a custom mapping applied.
				 * Checked by comparing the current mapping
				 * config against the factory mapping config
				 */
				if (data[23] != 0)
					data[22] = 0;

				/* Elite Series 2 5.x firmware paddle bits
				 * (before the packet was split)
				 */
				input_report_key(dev, BTN_TRIGGER_HAPPY5, data[22] & BIT(0));
				input_report_key(dev, BTN_TRIGGER_HAPPY6, data[22] & BIT(1));
				input_report_key(dev, BTN_TRIGGER_HAPPY7, data[22] & BIT(2));
				input_report_key(dev, BTN_TRIGGER_HAPPY8, data[22] & BIT(3));
			}
		}

		do_sync = true;
	}

	if (do_sync)
		input_sync(dev);
}

static void xpad_irq_in(struct urb *urb)
{
	struct usb_xpad *xpad = urb->context;
	struct device *dev = &xpad->intf->dev;
	int retval, status;

	status = urb->status;

	switch (status) {
	case 0:
		/* success */
		break;
	case -ECONNRESET:
	case -ENOENT:
	case -ESHUTDOWN:
		/* this urb is terminated, clean up */
		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
			__func__, status);
		return;
	default:
		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
			__func__, status);
		goto exit;
	}

	switch (xpad->xtype) {
	case XTYPE_XBOX360:
		xpad360_process_packet(xpad, xpad->dev, 0, xpad->idata);
		break;
	case XTYPE_XBOX360W:
		xpad360w_process_packet(xpad, 0, xpad->idata);
		break;
	case XTYPE_XBOXONE:
		xpadone_process_packet(xpad, 0, xpad->idata);
		break;
	default:
		xpad_process_packet(xpad, 0, xpad->idata);
	}

exit:
	retval = usb_submit_urb(urb, GFP_ATOMIC);
	if (retval)
		dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
			__func__, retval);
}

/* Callers must hold xpad->odata_lock spinlock */
static bool xpad_prepare_next_init_packet(struct usb_xpad *xpad)
{
	const struct xboxone_init_packet *init_packet;

	if (xpad->xtype != XTYPE_XBOXONE)
		return false;

	/* Perform initialization sequence for Xbox One pads that require it */
	while (xpad->init_seq < ARRAY_SIZE(xboxone_init_packets)) {
		init_packet = &xboxone_init_packets[xpad->init_seq++];

		if (init_packet->idVendor != 0 &&
		    init_packet->idVendor != xpad->dev->id.vendor)
			continue;

		if (init_packet->idProduct != 0 &&
		    init_packet->idProduct != xpad->dev->id.product)
			continue;

		/* This packet applies to our device, so prepare to send it */
		memcpy(xpad->odata, init_packet->data, init_packet->len);
		xpad->irq_out->transfer_buffer_length = init_packet->len;

		/* Update packet with current sequence number */
		xpad->odata[2] = xpad->odata_serial++;
		return true;
	}

	return false;
}

/* Callers must hold xpad->odata_lock spinlock */
static bool xpad_prepare_next_out_packet(struct usb_xpad *xpad)
{
	struct xpad_output_packet *pkt, *packet = NULL;
	int i;

	/* We may have init packets to send before we can send user commands */
	if (xpad_prepare_next_init_packet(xpad))
		return true;

	for (i = 0; i < XPAD_NUM_OUT_PACKETS; i++) {
		if (++xpad->last_out_packet >= XPAD_NUM_OUT_PACKETS)
			xpad->last_out_packet = 0;

		pkt = &xpad->out_packets[xpad->last_out_packet];
		if (pkt->pending) {
			dev_dbg(&xpad->intf->dev,
				"%s - found pending output packet %d\n",
				__func__, xpad->last_out_packet);
			packet = pkt;
			break;
		}
	}

	if (packet) {
		memcpy(xpad->odata, packet->data, packet->len);
		xpad->irq_out->transfer_buffer_length = packet->len;
		packet->pending = false;
		return true;
	}

	return false;
}

/* Callers must hold xpad->odata_lock spinlock */
static int xpad_try_sending_next_out_packet(struct usb_xpad *xpad)
{
	int error;

	if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) {
		usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor);
		error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
		if (error) {
			dev_err(&xpad->intf->dev,
				"%s - usb_submit_urb failed with result %d\n",
				__func__, error);
			usb_unanchor_urb(xpad->irq_out);
			return -EIO;
		}

		xpad->irq_out_active = true;
	}

	return 0;
}

static void xpad_irq_out(struct urb *urb)
{
	struct usb_xpad *xpad = urb->context;
	struct device *dev = &xpad->intf->dev;
	int status = urb->status;
	int error;
	unsigned long flags;

	spin_lock_irqsave(&xpad->odata_lock, flags);

	switch (status) {
	case 0:
		/* success */
		xpad->irq_out_active = xpad_prepare_next_out_packet(xpad);
		break;

	case -ECONNRESET:
	case -ENOENT:
	case -ESHUTDOWN:
		/* this urb is terminated, clean up */
		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
			__func__, status);
		xpad->irq_out_active = false;
		break;

	default:
		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
			__func__, status);
		break;
	}

	if (xpad->irq_out_active) {
		usb_anchor_urb(urb, &xpad->irq_out_anchor);
		error = usb_submit_urb(urb, GFP_ATOMIC);
		if (error) {
			dev_err(dev,
				"%s - usb_submit_urb failed with result %d\n",
				__func__, error);
			usb_unanchor_urb(urb);
			xpad->irq_out_active = false;
		}
	}

	spin_unlock_irqrestore(&xpad->odata_lock, flags);
}

static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad,
			struct usb_endpoint_descriptor *ep_irq_out)
{
	int error;

	if (xpad->xtype == XTYPE_UNKNOWN)
		return 0;

	init_usb_anchor(&xpad->irq_out_anchor);

	xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
					 GFP_KERNEL, &xpad->odata_dma);
	if (!xpad->odata)
		return -ENOMEM;

	spin_lock_init(&xpad->odata_lock);

	xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
	if (!xpad->irq_out) {
		error = -ENOMEM;
		goto err_free_coherent;
	}

	usb_fill_int_urb(xpad->irq_out, xpad->udev,
			 usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress),
			 xpad->odata, XPAD_PKT_LEN,
			 xpad_irq_out, xpad, ep_irq_out->bInterval);
	xpad->irq_out->transfer_dma = xpad->odata_dma;
	xpad->irq_out->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

	return 0;

err_free_coherent:
	usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
	return error;
}

static void xpad_stop_output(struct usb_xpad *xpad)
{
	if (xpad->xtype != XTYPE_UNKNOWN) {
		if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor,
						   5000)) {
			dev_warn(&xpad->intf->dev,
				 "timed out waiting for output URB to complete, killing\n");
			usb_kill_anchored_urbs(&xpad->irq_out_anchor);
		}
	}
}

static void xpad_deinit_output(struct usb_xpad *xpad)
{
	if (xpad->xtype != XTYPE_UNKNOWN) {
		usb_free_urb(xpad->irq_out);
		usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
				xpad->odata, xpad->odata_dma);
	}
}

static int xpad_inquiry_pad_presence(struct usb_xpad *xpad)
{
	struct xpad_output_packet *packet =
			&xpad->out_packets[XPAD_OUT_CMD_IDX];
	unsigned long flags;
	int retval;

	spin_lock_irqsave(&xpad->odata_lock, flags);

	packet->data[0] = 0x08;
	packet->data[1] = 0x00;
	packet->data[2] = 0x0F;
	packet->data[3] = 0xC0;
	packet->data[4] = 0x00;
	packet->data[5] = 0x00;
	packet->data[6] = 0x00;
	packet->data[7] = 0x00;
	packet->data[8] = 0x00;
	packet->data[9] = 0x00;
	packet->data[10] = 0x00;
	packet->data[11] = 0x00;
	packet->len = 12;
	packet->pending = true;

	/* Reset the sequence so we send out presence first */
	xpad->last_out_packet = -1;
	retval = xpad_try_sending_next_out_packet(xpad);

	spin_unlock_irqrestore(&xpad->odata_lock, flags);

	return retval;
}

static int xpad_start_xbox_one(struct usb_xpad *xpad)
{
	unsigned long flags;
	int retval;

	if (usb_ifnum_to_if(xpad->udev, GIP_WIRED_INTF_AUDIO)) {
		/*
		 * Explicitly disable the audio interface. This is needed
		 * for some controllers, such as the PowerA Enhanced Wired
		 * Controller for Series X|S (0x20d6:0x200e) to report the
		 * guide button.
		 */
		retval = usb_set_interface(xpad->udev,
					   GIP_WIRED_INTF_AUDIO, 0);
		if (retval)
			dev_warn(&xpad->dev->dev,
				 "unable to disable audio interface: %d\n",
				 retval);
	}

	spin_lock_irqsave(&xpad->odata_lock, flags);

	/*
	 * Begin the init sequence by attempting to send a packet.
	 * We will cycle through the init packet sequence before
	 * sending any packets from the output ring.
	 */
	xpad->init_seq = 0;
	retval = xpad_try_sending_next_out_packet(xpad);

	spin_unlock_irqrestore(&xpad->odata_lock, flags);

	return retval;
}

static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num)
{
	unsigned long flags;
	struct xpad_output_packet *packet =
			&xpad->out_packets[XPAD_OUT_CMD_IDX];
	static const u8 mode_report_ack[] = {
		GIP_CMD_ACK, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(9),
		0x00, GIP_CMD_VIRTUAL_KEY, GIP_OPT_INTERNAL, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00
	};

	spin_lock_irqsave(&xpad->odata_lock, flags);

	packet->len = sizeof(mode_report_ack);
	memcpy(packet->data, mode_report_ack, packet->len);
	packet->data[2] = seq_num;
	packet->pending = true;

	/* Reset the sequence so we send out the ack now */
	xpad->last_out_packet = -1;
	xpad_try_sending_next_out_packet(xpad);

	spin_unlock_irqrestore(&xpad->odata_lock, flags);
}

#ifdef CONFIG_JOYSTICK_XPAD_FF
static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
{
	struct usb_xpad *xpad = input_get_drvdata(dev);
	struct xpad_output_packet *packet = &xpad->out_packets[XPAD_OUT_FF_IDX];
	__u16 strong;
	__u16 weak;
	int retval;
	unsigned long flags;

	if (effect->type != FF_RUMBLE)
		return 0;

	strong = effect->u.rumble.strong_magnitude;
	weak = effect->u.rumble.weak_magnitude;

	spin_lock_irqsave(&xpad->odata_lock, flags);

	switch (xpad->xtype) {
	case XTYPE_XBOX:
		packet->data[0] = 0x00;
		packet->data[1] = 0x06;
		packet->data[2] = 0x00;
		packet->data[3] = strong / 256;	/* left actuator */
		packet->data[4] = 0x00;
		packet->data[5] = weak / 256;	/* right actuator */
		packet->len = 6;
		packet->pending = true;
		break;

	case XTYPE_XBOX360:
		packet->data[0] = 0x00;
		packet->data[1] = 0x08;
		packet->data[2] = 0x00;
		packet->data[3] = strong / 256;  /* left actuator? */
		packet->data[4] = weak / 256;	/* right actuator? */
		packet->data[5] = 0x00;
		packet->data[6] = 0x00;
		packet->data[7] = 0x00;
		packet->len = 8;
		packet->pending = true;
		break;

	case XTYPE_XBOX360W:
		packet->data[0] = 0x00;
		packet->data[1] = 0x01;
		packet->data[2] = 0x0F;
		packet->data[3] = 0xC0;
		packet->data[4] = 0x00;
		packet->data[5] = strong / 256;
		packet->data[6] = weak / 256;
		packet->data[7] = 0x00;
		packet->data[8] = 0x00;
		packet->data[9] = 0x00;
		packet->data[10] = 0x00;
		packet->data[11] = 0x00;
		packet->len = 12;
		packet->pending = true;
		break;

	case XTYPE_XBOXONE:
		packet->data[0] = GIP_CMD_RUMBLE; /* activate rumble */
		packet->data[1] = 0x00;
		packet->data[2] = xpad->odata_serial++;
		packet->data[3] = GIP_PL_LEN(9);
		packet->data[4] = 0x00;
		packet->data[5] = GIP_MOTOR_ALL;
		packet->data[6] = 0x00; /* left trigger */
		packet->data[7] = 0x00; /* right trigger */
		packet->data[8] = strong / 512;	/* left actuator */
		packet->data[9] = weak / 512;	/* right actuator */
		packet->data[10] = 0xFF; /* on period */
		packet->data[11] = 0x00; /* off period */
		packet->data[12] = 0xFF; /* repeat count */
		packet->len = 13;
		packet->pending = true;
		break;

	default:
		dev_dbg(&xpad->dev->dev,
			"%s - rumble command sent to unsupported xpad type: %d\n",
			__func__, xpad->xtype);
		retval = -EINVAL;
		goto out;
	}

	retval = xpad_try_sending_next_out_packet(xpad);

out:
	spin_unlock_irqrestore(&xpad->odata_lock, flags);
	return retval;
}

static int xpad_init_ff(struct usb_xpad *xpad)
{
	if (xpad->xtype == XTYPE_UNKNOWN)
		return 0;

	input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);

	return input_ff_create_memless(xpad->dev, NULL, xpad_play_effect);
}

#else
static int xpad_init_ff(struct usb_xpad *xpad) { return 0; }
#endif

#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
#include <linux/leds.h>
#include <linux/idr.h>

static DEFINE_IDA(xpad_pad_seq);

struct xpad_led {
	char name[16];
	struct led_classdev led_cdev;
	struct usb_xpad *xpad;
};

/*
 * set the LEDs on Xbox 360 / Wireless Controllers
 * @param command
 *  0: off
 *  1: all blink, then previous setting
 *  2: 1/top-left blink, then on
 *  3: 2/top-right blink, then on
 *  4: 3/bottom-left blink, then on
 *  5: 4/bottom-right blink, then on
 *  6: 1/top-left on
 *  7: 2/top-right on
 *  8: 3/bottom-left on
 *  9: 4/bottom-right on
 * 10: rotate
 * 11: blink, based on previous setting
 * 12: slow blink, based on previous setting
 * 13: rotate with two lights
 * 14: persistent slow all blink
 * 15: blink once, then previous setting
 */
static void xpad_send_led_command(struct usb_xpad *xpad, int command)
{
	struct xpad_output_packet *packet =
			&xpad->out_packets[XPAD_OUT_LED_IDX];
	unsigned long flags;

	command %= 16;

	spin_lock_irqsave(&xpad->odata_lock, flags);

	switch (xpad->xtype) {
	case XTYPE_XBOX360:
		packet->data[0] = 0x01;
		packet->data[1] = 0x03;
		packet->data[2] = command;
		packet->len = 3;
		packet->pending = true;
		break;

	case XTYPE_XBOX360W:
		packet->data[0] = 0x00;
		packet->data[1] = 0x00;
		packet->data[2] = 0x08;
		packet->data[3] = 0x40 + command;
		packet->data[4] = 0x00;
		packet->data[5] = 0x00;
		packet->data[6] = 0x00;
		packet->data[7] = 0x00;
		packet->data[8] = 0x00;
		packet->data[9] = 0x00;
		packet->data[10] = 0x00;
		packet->data[11] = 0x00;
		packet->len = 12;
		packet->pending = true;
		break;
	}

	xpad_try_sending_next_out_packet(xpad);

	spin_unlock_irqrestore(&xpad->odata_lock, flags);
}

/*
 * Light up the segment corresponding to the pad number on
 * Xbox 360 Controllers.
 */
static void xpad_identify_controller(struct usb_xpad *xpad)
{
	led_set_brightness(&xpad->led->led_cdev, (xpad->pad_nr % 4) + 2);
}

static void xpad_led_set(struct led_classdev *led_cdev,
			 enum led_brightness value)
{
	struct xpad_led *xpad_led = container_of(led_cdev,
						 struct xpad_led, led_cdev);

	xpad_send_led_command(xpad_led->xpad, value);
}

static int xpad_led_probe(struct usb_xpad *xpad)
{
	struct xpad_led *led;
	struct led_classdev *led_cdev;
	int error;

	if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX360W)
		return 0;

	xpad->led = led = kzalloc(sizeof(struct xpad_led), GFP_KERNEL);
	if (!led)
		return -ENOMEM;

	xpad->pad_nr = ida_alloc(&xpad_pad_seq, GFP_KERNEL);
	if (xpad->pad_nr < 0) {
		error = xpad->pad_nr;
		goto err_free_mem;
	}

	snprintf(led->name, sizeof(led->name), "xpad%d", xpad->pad_nr);
	led->xpad = xpad;

	led_cdev = &led->led_cdev;
	led_cdev->name = led->name;
	led_cdev->brightness_set = xpad_led_set;
	led_cdev->flags = LED_CORE_SUSPENDRESUME;

	error = led_classdev_register(&xpad->udev->dev, led_cdev);
	if (error)
		goto err_free_id;

	xpad_identify_controller(xpad);

	return 0;

err_free_id:
	ida_free(&xpad_pad_seq, xpad->pad_nr);
err_free_mem:
	kfree(led);
	xpad->led = NULL;
	return error;
}

static void xpad_led_disconnect(struct usb_xpad *xpad)
{
	struct xpad_led *xpad_led = xpad->led;

	if (xpad_led) {
		led_classdev_unregister(&xpad_led->led_cdev);
		ida_free(&xpad_pad_seq, xpad->pad_nr);
		kfree(xpad_led);
	}
}
#else
static int xpad_led_probe(struct usb_xpad *xpad) { return 0; }
static void xpad_led_disconnect(struct usb_xpad *xpad) { }
#endif

static int xpad_start_input(struct usb_xpad *xpad)
{
	int error;

	if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
		return -EIO;

	if (xpad->xtype == XTYPE_XBOXONE) {
		error = xpad_start_xbox_one(xpad);
		if (error) {
			usb_kill_urb(xpad->irq_in);
			return error;
		}
	}
	if (xpad->xtype == XTYPE_XBOX360) {
		/*
		 * Some third-party controllers Xbox 360-style controllers
		 * require this message to finish initialization.
		 */
		u8 dummy[20];

		error = usb_control_msg_recv(xpad->udev, 0,
					     /* bRequest */ 0x01,
					     /* bmRequestType */
					     USB_TYPE_VENDOR | USB_DIR_IN |
						USB_RECIP_INTERFACE,
					     /* wValue */ 0x100,
					     /* wIndex */ 0x00,
					     dummy, sizeof(dummy),
					     25, GFP_KERNEL);
		if (error)
			dev_warn(&xpad->dev->dev,
				 "unable to receive magic message: %d\n",
				 error);
	}

	return 0;
}

static void xpad_stop_input(struct usb_xpad *xpad)
{
	usb_kill_urb(xpad->irq_in);
}

static void xpad360w_poweroff_controller(struct usb_xpad *xpad)
{
	unsigned long flags;
	struct xpad_output_packet *packet =
			&xpad->out_packets[XPAD_OUT_CMD_IDX];

	spin_lock_irqsave(&xpad->odata_lock, flags);

	packet->data[0] = 0x00;
	packet->data[1] = 0x00;
	packet->data[2] = 0x08;
	packet->data[3] = 0xC0;
	packet->data[4] = 0x00;
	packet->data[5] = 0x00;
	packet->data[6] = 0x00;
	packet->data[7] = 0x00;
	packet->data[8] = 0x00;
	packet->data[9] = 0x00;
	packet->data[10] = 0x00;
	packet->data[11] = 0x00;
	packet->len = 12;
	packet->pending = true;

	/* Reset the sequence so we send out poweroff now */
	xpad->last_out_packet = -1;
	xpad_try_sending_next_out_packet(xpad);

	spin_unlock_irqrestore(&xpad->odata_lock, flags);
}

static int xpad360w_start_input(struct usb_xpad *xpad)
{
	int error;

	error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
	if (error)
		return -EIO;

	/*
	 * Send presence packet.
	 * This will force the controller to resend connection packets.
	 * This is useful in the case we activate the module after the
	 * adapter has been plugged in, as it won't automatically
	 * send us info about the controllers.
	 */
	error = xpad_inquiry_pad_presence(xpad);
	if (error) {
		usb_kill_urb(xpad->irq_in);
		return error;
	}

	return 0;
}

static void xpad360w_stop_input(struct usb_xpad *xpad)
{
	usb_kill_urb(xpad->irq_in);

	/* Make sure we are done with presence work if it was scheduled */
	flush_work(&xpad->work);
}

static int xpad_open(struct input_dev *dev)
{
	struct usb_xpad *xpad = input_get_drvdata(dev);

	return xpad_start_input(xpad);
}

static void xpad_close(struct input_dev *dev)
{
	struct usb_xpad *xpad = input_get_drvdata(dev);

	xpad_stop_input(xpad);
}

static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
{
	struct usb_xpad *xpad = input_get_drvdata(input_dev);

	switch (abs) {
	case ABS_X:
	case ABS_Y:
	case ABS_RX:
	case ABS_RY:	/* the two sticks */
		input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128);
		break;
	case ABS_Z:
	case ABS_RZ:	/* the triggers (if mapped to axes) */
		if (xpad->xtype == XTYPE_XBOXONE)
			input_set_abs_params(input_dev, abs, 0, 1023, 0, 0);
		else
			input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
		break;
	case ABS_HAT0X:
	case ABS_HAT0Y:	/* the d-pad (only if dpad is mapped to axes */
		input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
		break;
	case ABS_PROFILE: /* 4 value profile button (such as on XAC) */
		input_set_abs_params(input_dev, abs, 0, 4, 0, 0);
		break;
	default:
		input_set_abs_params(input_dev, abs, 0, 0, 0, 0);
		break;
	}
}

static void xpad_deinit_input(struct usb_xpad *xpad)
{
	if (xpad->input_created) {
		xpad->input_created = false;
		xpad_led_disconnect(xpad);
		input_unregister_device(xpad->dev);
	}
}

static int xpad_init_input(struct usb_xpad *xpad)
{
	struct input_dev *input_dev;
	int i, error;

	input_dev = input_allocate_device();
	if (!input_dev)
		return -ENOMEM;

	xpad->dev = input_dev;
	input_dev->name = xpad->name;
	input_dev->phys = xpad->phys;
	usb_to_input_id(xpad->udev, &input_dev->id);

	if (xpad->xtype == XTYPE_XBOX360W) {
		/* x360w controllers and the receiver have different ids */
		input_dev->id.product = 0x02a1;
	}

	input_dev->dev.parent = &xpad->intf->dev;

	input_set_drvdata(input_dev, xpad);

	if (xpad->xtype != XTYPE_XBOX360W) {
		input_dev->open = xpad_open;
		input_dev->close = xpad_close;
	}

	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
		/* set up axes */
		for (i = 0; xpad_abs[i] >= 0; i++)
			xpad_set_up_abs(input_dev, xpad_abs[i]);
	}

	/* set up standard buttons */
	for (i = 0; xpad_common_btn[i] >= 0; i++)
		input_set_capability(input_dev, EV_KEY, xpad_common_btn[i]);

	/* set up model-specific ones */
	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
	    xpad->xtype == XTYPE_XBOXONE) {
		for (i = 0; xpad360_btn[i] >= 0; i++)
			input_set_capability(input_dev, EV_KEY, xpad360_btn[i]);
		if (xpad->mapping & MAP_SELECT_BUTTON)
			input_set_capability(input_dev, EV_KEY, KEY_RECORD);
	} else {
		for (i = 0; xpad_btn[i] >= 0; i++)
			input_set_capability(input_dev, EV_KEY, xpad_btn[i]);
	}

	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
		for (i = 0; xpad_btn_pad[i] >= 0; i++)
			input_set_capability(input_dev, EV_KEY,
					     xpad_btn_pad[i]);
	}

	/* set up paddles if the controller has them */
	if (xpad->mapping & MAP_PADDLES) {
		for (i = 0; xpad_btn_paddles[i] >= 0; i++)
			input_set_capability(input_dev, EV_KEY, xpad_btn_paddles[i]);
	}

	/*
	 * This should be a simple else block. However historically
	 * xbox360w has mapped DPAD to buttons while xbox360 did not. This
	 * made no sense, but now we can not just switch back and have to
	 * support both behaviors.
	 */
	if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
	    xpad->xtype == XTYPE_XBOX360W) {
		for (i = 0; xpad_abs_pad[i] >= 0; i++)
			xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
	}

	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
		for (i = 0; xpad_btn_triggers[i] >= 0; i++)
			input_set_capability(input_dev, EV_KEY,
					     xpad_btn_triggers[i]);
	} else {
		for (i = 0; xpad_abs_triggers[i] >= 0; i++)
			xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
	}

	/* setup profile button as an axis with 4 possible values */
	if (xpad->mapping & MAP_PROFILE_BUTTON)
		xpad_set_up_abs(input_dev, ABS_PROFILE);

	error = xpad_init_ff(xpad);
	if (error)
		goto err_free_input;

	error = xpad_led_probe(xpad);
	if (error)
		goto err_destroy_ff;

	error = input_register_device(xpad->dev);
	if (error)
		goto err_disconnect_led;

	xpad->input_created = true;
	return 0;

err_disconnect_led:
	xpad_led_disconnect(xpad);
err_destroy_ff:
	input_ff_destroy(input_dev);
err_free_input:
	input_free_device(input_dev);
	return error;
}

static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
	struct usb_device *udev = interface_to_usbdev(intf);
	struct usb_xpad *xpad;
	struct usb_endpoint_descriptor *ep_irq_in, *ep_irq_out;
	int i, error;

	if (intf->cur_altsetting->desc.bNumEndpoints != 2)
		return -ENODEV;

	for (i = 0; xpad_device[i].idVendor; i++) {
		if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
		    (le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct))
			break;
	}

	xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
	if (!xpad)
		return -ENOMEM;

	usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
	strlcat(xpad->phys, "/input0", sizeof(xpad->phys));

	xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN,
					 GFP_KERNEL, &xpad->idata_dma);
	if (!xpad->idata) {
		error = -ENOMEM;
		goto err_free_mem;
	}

	xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
	if (!xpad->irq_in) {
		error = -ENOMEM;
		goto err_free_idata;
	}

	xpad->udev = udev;
	xpad->intf = intf;
	xpad->mapping = xpad_device[i].mapping;
	xpad->xtype = xpad_device[i].xtype;
	xpad->name = xpad_device[i].name;
	xpad->packet_type = PKT_XB;
	INIT_WORK(&xpad->work, xpad_presence_work);

	if (xpad->xtype == XTYPE_UNKNOWN) {
		if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
			if (intf->cur_altsetting->desc.bInterfaceProtocol == 129)
				xpad->xtype = XTYPE_XBOX360W;
			else if (intf->cur_altsetting->desc.bInterfaceProtocol == 208)
				xpad->xtype = XTYPE_XBOXONE;
			else
				xpad->xtype = XTYPE_XBOX360;
		} else {
			xpad->xtype = XTYPE_XBOX;
		}

		if (dpad_to_buttons)
			xpad->mapping |= MAP_DPAD_TO_BUTTONS;
		if (triggers_to_buttons)
			xpad->mapping |= MAP_TRIGGERS_TO_BUTTONS;
		if (sticks_to_null)
			xpad->mapping |= MAP_STICKS_TO_NULL;
	}

	if (xpad->xtype == XTYPE_XBOXONE &&
	    intf->cur_altsetting->desc.bInterfaceNumber != GIP_WIRED_INTF_DATA) {
		/*
		 * The Xbox One controller lists three interfaces all with the
		 * same interface class, subclass and protocol. Differentiate by
		 * interface number.
		 */
		error = -ENODEV;
		goto err_free_in_urb;
	}

	ep_irq_in = ep_irq_out = NULL;

	for (i = 0; i < 2; i++) {
		struct usb_endpoint_descriptor *ep =
				&intf->cur_altsetting->endpoint[i].desc;

		if (usb_endpoint_xfer_int(ep)) {
			if (usb_endpoint_dir_in(ep))
				ep_irq_in = ep;
			else
				ep_irq_out = ep;
		}
	}

	if (!ep_irq_in || !ep_irq_out) {
		error = -ENODEV;
		goto err_free_in_urb;
	}

	error = xpad_init_output(intf, xpad, ep_irq_out);
	if (error)
		goto err_free_in_urb;

	usb_fill_int_urb(xpad->irq_in, udev,
			 usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
			 xpad->idata, XPAD_PKT_LEN, xpad_irq_in,
			 xpad, ep_irq_in->bInterval);
	xpad->irq_in->transfer_dma = xpad->idata_dma;
	xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

	usb_set_intfdata(intf, xpad);

	/* Packet type detection */
	if (le16_to_cpu(udev->descriptor.idVendor) == 0x045e) { /* Microsoft controllers */
		if (le16_to_cpu(udev->descriptor.idProduct) == 0x02e3) {
			/* The original elite controller always uses the oldest
			 * type of extended packet
			 */
			xpad->packet_type = PKT_XBE1;
		} else if (le16_to_cpu(udev->descriptor.idProduct) == 0x0b00) {
			/* The elite 2 controller has seen multiple packet
			 * revisions. These are tied to specific firmware
			 * versions
			 */
			if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x0500) {
				/* This is the format that the Elite 2 used
				 * prior to the BLE update
				 */
				xpad->packet_type = PKT_XBE2_FW_OLD;
			} else if (le16_to_cpu(udev->descriptor.bcdDevice) <
				   0x050b) {
				/* This is the format that the Elite 2 used
				 * prior to the update that split the packet
				 */
				xpad->packet_type = PKT_XBE2_FW_5_EARLY;
			} else {
				/* The split packet format that was introduced
				 * in firmware v5.11
				 */
				xpad->packet_type = PKT_XBE2_FW_5_11;
			}
		}
	}

	if (xpad->xtype == XTYPE_XBOX360W) {
		/*
		 * Submit the int URB immediately rather than waiting for open
		 * because we get status messages from the device whether
		 * or not any controllers are attached.  In fact, it's
		 * exactly the message that a controller has arrived that
		 * we're waiting for.
		 */
		error = xpad360w_start_input(xpad);
		if (error)
			goto err_deinit_output;
		/*
		 * Wireless controllers require RESET_RESUME to work properly
		 * after suspend. Ideally this quirk should be in usb core
		 * quirk list, but we have too many vendors producing these
		 * controllers and we'd need to maintain 2 identical lists
		 * here in this driver and in usb core.
		 */
		udev->quirks |= USB_QUIRK_RESET_RESUME;
	} else {
		error = xpad_init_input(xpad);
		if (error)
			goto err_deinit_output;
	}
	return 0;

err_deinit_output:
	xpad_deinit_output(xpad);
err_free_in_urb:
	usb_free_urb(xpad->irq_in);
err_free_idata:
	usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
err_free_mem:
	kfree(xpad);
	return error;
}

static void xpad_disconnect(struct usb_interface *intf)
{
	struct usb_xpad *xpad = usb_get_intfdata(intf);

	if (xpad->xtype == XTYPE_XBOX360W)
		xpad360w_stop_input(xpad);

	xpad_deinit_input(xpad);

	/*
	 * Now that both input device and LED device are gone we can
	 * stop output URB.
	 */
	xpad_stop_output(xpad);

	xpad_deinit_output(xpad);

	usb_free_urb(xpad->irq_in);
	usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
			xpad->idata, xpad->idata_dma);

	kfree(xpad);

	usb_set_intfdata(intf, NULL);
}

static int xpad_suspend(struct usb_interface *intf, pm_message_t message)
{
	struct usb_xpad *xpad = usb_get_intfdata(intf);
	struct input_dev *input = xpad->dev;

	if (xpad->xtype == XTYPE_XBOX360W) {
		/*
		 * Wireless controllers always listen to input so
		 * they are notified when controller shows up
		 * or goes away.
		 */
		xpad360w_stop_input(xpad);

		/*
		 * The wireless adapter is going off now, so the
		 * gamepads are going to become disconnected.
		 * Unless explicitly disabled, power them down
		 * so they don't just sit there flashing.
		 */
		if (auto_poweroff && xpad->pad_present)
			xpad360w_poweroff_controller(xpad);
	} else {
		mutex_lock(&input->mutex);
		if (input_device_enabled(input))
			xpad_stop_input(xpad);
		mutex_unlock(&input->mutex);
	}

	xpad_stop_output(xpad);

	return 0;
}

static int xpad_resume(struct usb_interface *intf)
{
	struct usb_xpad *xpad = usb_get_intfdata(intf);
	struct input_dev *input = xpad->dev;
	int retval = 0;

	if (xpad->xtype == XTYPE_XBOX360W) {
		retval = xpad360w_start_input(xpad);
	} else {
		mutex_lock(&input->mutex);
		if (input_device_enabled(input)) {
			retval = xpad_start_input(xpad);
		} else if (xpad->xtype == XTYPE_XBOXONE) {
			/*
			 * Even if there are no users, we'll send Xbox One pads
			 * the startup sequence so they don't sit there and
			 * blink until somebody opens the input device again.
			 */
			retval = xpad_start_xbox_one(xpad);
		}
		mutex_unlock(&input->mutex);
	}

	return retval;
}

static struct usb_driver xpad_driver = {
	.name		= "xpad",
	.probe		= xpad_probe,
	.disconnect	= xpad_disconnect,
	.suspend	= xpad_suspend,
	.resume		= xpad_resume,
	.id_table	= xpad_table,
};

module_usb_driver(xpad_driver);

MODULE_AUTHOR("Marko Friedemann <mfr@bmx-chemnitz.de>");
MODULE_DESCRIPTION("Xbox pad driver");
MODULE_LICENSE("GPL");