[PATCH] sil24: make error_intr less verbose
sil24_error_intr logs all error interrupts. ATAPI devices generates
many harmless errors which can be ignored and all serious ones are
reported via sense data by SCSI layer. Don't log device errors from
ATAPI devices.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 340641f..e0d6f19 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -684,9 +684,15 @@
if (serror)
writel(serror, port + PORT_SERROR);
- printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
- " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
- ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
+ /*
+ * Don't log ATAPI device errors. They're supposed to happen
+ * and any serious errors will be logged using sense data by
+ * the SCSI layer.
+ */
+ if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB)
+ printk("ata%u: error interrupt on port%d\n"
+ " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
+ ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) {
/*
