ath9k_hw: add TX/RX gain register initialization for AR9003
This is done depending on what the EEPROM settings indicates.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index 1984b4f..f32665d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -105,6 +105,56 @@
3);
}
+static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
+{
+ switch (ar9003_hw_get_tx_gain_idx(ah)) {
+ case 0:
+ default:
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9300Modes_lowest_ob_db_tx_gain_table_2p0,
+ ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p0),
+ 5);
+ break;
+ case 1:
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9300Modes_high_ob_db_tx_gain_table_2p0,
+ ARRAY_SIZE(ar9300Modes_high_ob_db_tx_gain_table_2p0),
+ 5);
+ break;
+ case 2:
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9300Modes_low_ob_db_tx_gain_table_2p0,
+ ARRAY_SIZE(ar9300Modes_low_ob_db_tx_gain_table_2p0),
+ 5);
+ break;
+ }
+}
+
+static void ar9003_rx_gain_table_apply(struct ath_hw *ah)
+{
+ switch (ar9003_hw_get_rx_gain_idx(ah)) {
+ case 0:
+ default:
+ INIT_INI_ARRAY(&ah->iniModesRxGain, ar9300Common_rx_gain_table_2p0,
+ ARRAY_SIZE(ar9300Common_rx_gain_table_2p0),
+ 2);
+ break;
+ case 1:
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ ar9300Common_wo_xlna_rx_gain_table_2p0,
+ ARRAY_SIZE(ar9300Common_wo_xlna_rx_gain_table_2p0),
+ 2);
+ break;
+ }
+}
+
+/* set gain table pointers according to values read from the eeprom */
+static void ar9003_hw_init_mode_gain_regs(struct ath_hw *ah)
+{
+ ar9003_tx_gain_table_apply(ah);
+ ar9003_rx_gain_table_apply(ah);
+}
+
/*
* Helper for ASPM support.
*
@@ -143,6 +193,7 @@
struct ath_hw_ops *ops = ath9k_hw_ops(ah);
priv_ops->init_mode_regs = ar9003_hw_init_mode_regs;
+ priv_ops->init_mode_gain_regs = ar9003_hw_init_mode_gain_regs;
priv_ops->macversion_supported = ar9003_hw_macversion_supported;
ops->config_pci_powersave = ar9003_hw_configpcipowersave;