diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 4c44ad9..ab96da4 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -14,82 +14,61 @@
 	bool
 	select PCIE_DW
 
-config PCI_DRA7XX
-	tristate
-
-config PCI_DRA7XX_HOST
-	tristate "TI DRA7xx PCIe controller (host mode)"
-	depends on SOC_DRA7XX || COMPILE_TEST
-	depends on OF && HAS_IOMEM && TI_PIPE3
+config PCIE_AL
+	bool "Amazon Annapurna Labs PCIe controller"
+	depends on OF && (ARM64 || COMPILE_TEST)
 	depends on PCI_MSI
 	select PCIE_DW_HOST
-	select PCI_DRA7XX
-	default y if SOC_DRA7XX
+	select PCI_ECAM
 	help
-	  Enables support for the PCIe controller in the DRA7xx SoC to work in
-	  host mode. There are two instances of PCIe controller in DRA7xx.
-	  This controller can work either as EP or RC. In order to enable
-	  host-specific features PCI_DRA7XX_HOST must be selected and in order
-	  to enable device-specific features PCI_DRA7XX_EP must be selected.
-	  This uses the DesignWare core.
+	  Say Y here to enable support of the Amazon's Annapurna Labs PCIe
+	  controller IP on Amazon SoCs. The PCIe controller uses the DesignWare
+	  core plus Annapurna Labs proprietary hardware wrappers. This is
+	  required only for DT-based platforms. ACPI platforms with the
+	  Annapurna Labs PCIe controller don't need to enable this.
 
-config PCI_DRA7XX_EP
-	tristate "TI DRA7xx PCIe controller (endpoint mode)"
-	depends on SOC_DRA7XX || COMPILE_TEST
-	depends on OF && HAS_IOMEM && TI_PIPE3
-	depends on PCI_ENDPOINT
-	select PCIE_DW_EP
-	select PCI_DRA7XX
+config PCI_MESON
+	tristate "Amlogic Meson PCIe controller"
+	default m if ARCH_MESON
+	depends on PCI_MSI
+	select PCIE_DW_HOST
 	help
-	  Enables support for the PCIe controller in the DRA7xx SoC to work in
-	  endpoint mode. There are two instances of PCIe controller in DRA7xx.
-	  This controller can work either as EP or RC. In order to enable
-	  host-specific features PCI_DRA7XX_HOST must be selected and in order
-	  to enable device-specific features PCI_DRA7XX_EP must be selected.
-	  This uses the DesignWare core.
+	  Say Y here if you want to enable PCI controller support on Amlogic
+	  SoCs. The PCI controller on Amlogic is based on DesignWare hardware
+	  and therefore the driver re-uses the DesignWare core functions to
+	  implement the driver.
 
-config PCIE_DW_PLAT
+config PCIE_ARTPEC6
 	bool
 
-config PCIE_DW_PLAT_HOST
-	bool "Platform bus based DesignWare PCIe controller (host mode)"
+config PCIE_ARTPEC6_HOST
+	bool "Axis ARTPEC-6 PCIe controller (host mode)"
+	depends on MACH_ARTPEC6 || COMPILE_TEST
 	depends on PCI_MSI
 	select PCIE_DW_HOST
-	select PCIE_DW_PLAT
+	select PCIE_ARTPEC6
 	help
-	  Enables support for the PCIe controller in the Designware IP to
-	  work in host mode. There are two instances of PCIe controller in
-	  Designware IP.
-	  This controller can work either as EP or RC. In order to enable
-	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
-	  order to enable device-specific features PCI_DW_PLAT_EP must be
-	  selected.
+	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
+	  host mode. This uses the DesignWare core.
 
-config PCIE_DW_PLAT_EP
-	bool "Platform bus based DesignWare PCIe controller (endpoint mode)"
-	depends on PCI && PCI_MSI
+config PCIE_ARTPEC6_EP
+	bool "Axis ARTPEC-6 PCIe controller (endpoint mode)"
+	depends on MACH_ARTPEC6 || COMPILE_TEST
 	depends on PCI_ENDPOINT
 	select PCIE_DW_EP
-	select PCIE_DW_PLAT
+	select PCIE_ARTPEC6
 	help
-	  Enables support for the PCIe controller in the Designware IP to
-	  work in endpoint mode. There are two instances of PCIe controller
-	  in Designware IP.
-	  This controller can work either as EP or RC. In order to enable
-	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
-	  order to enable device-specific features PCI_DW_PLAT_EP must be
-	  selected.
+	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
+	  endpoint mode. This uses the DesignWare core.
 
-config PCI_EXYNOS
-	tristate "Samsung Exynos PCIe controller"
-	depends on ARCH_EXYNOS || COMPILE_TEST
+config PCIE_BT1
+	tristate "Baikal-T1 PCIe controller"
+	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
 	depends on PCI_MSI
 	select PCIE_DW_HOST
 	help
-	  Enables support for the PCIe controller in the Samsung Exynos SoCs
-	  to work in host mode. The PCI controller is based on the DesignWare
-	  hardware and therefore the driver re-uses the DesignWare core
-	  functions to implement the driver.
+	  Enables support for the PCIe controller in the Baikal-T1 SoC to work
+	  in host mode. It's based on the Synopsys DWC PCIe v4.60a IP-core.
 
 config PCI_IMX6
 	bool
@@ -118,41 +97,6 @@
 	  on DesignWare hardware and therefore the driver re-uses the
 	  DesignWare core functions to implement the driver.
 
-config PCIE_SPEAR13XX
-	bool "STMicroelectronics SPEAr PCIe controller"
-	depends on ARCH_SPEAR13XX || COMPILE_TEST
-	depends on PCI_MSI
-	select PCIE_DW_HOST
-	help
-	  Say Y here if you want PCIe support on SPEAr13XX SoCs.
-
-config PCI_KEYSTONE
-	bool
-
-config PCI_KEYSTONE_HOST
-	bool "TI Keystone PCIe controller (host mode)"
-	depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
-	depends on PCI_MSI
-	select PCIE_DW_HOST
-	select PCI_KEYSTONE
-	help
-	  Enables support for the PCIe controller in the Keystone SoC to
-	  work in host mode. The PCI controller on Keystone is based on
-	  DesignWare hardware and therefore the driver re-uses the
-	  DesignWare core functions to implement the driver.
-
-config PCI_KEYSTONE_EP
-	bool "TI Keystone PCIe controller (endpoint mode)"
-	depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
-	depends on PCI_ENDPOINT
-	select PCIE_DW_EP
-	select PCI_KEYSTONE
-	help
-	  Enables support for the PCIe controller in the Keystone SoC to
-	  work in endpoint mode. The PCI controller on Keystone is based
-	  on DesignWare hardware and therefore the driver re-uses the
-	  DesignWare core functions to implement the driver.
-
 config PCI_LAYERSCAPE
 	bool "Freescale Layerscape PCIe controller (host mode)"
 	depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
@@ -188,80 +132,23 @@
 	  Say Y here if you want PCIe controller support on HiSilicon
 	  Hip05 and Hip06 SoCs
 
-config PCIE_QCOM
-	bool "Qualcomm PCIe controller (host mode)"
-	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+config PCIE_KIRIN
+	depends on OF && (ARM64 || COMPILE_TEST)
+	tristate "HiSilicon Kirin PCIe controller"
 	depends on PCI_MSI
 	select PCIE_DW_HOST
-	select CRC8
+	select REGMAP_MMIO
 	help
-	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
-	  PCIe controller uses the DesignWare core plus Qualcomm-specific
-	  hardware wrappers.
+	  Say Y here if you want PCIe controller support
+	  on HiSilicon Kirin series SoCs.
 
-config PCIE_QCOM_EP
-	tristate "Qualcomm PCIe controller (endpoint mode)"
-	depends on OF && (ARCH_QCOM || COMPILE_TEST)
-	depends on PCI_ENDPOINT
-	select PCIE_DW_EP
-	help
-	  Say Y here to enable support for the PCIe controllers on Qualcomm SoCs
-	  to work in endpoint mode. The PCIe controller uses the DesignWare core
-	  plus Qualcomm-specific hardware wrappers.
-
-config PCIE_ARMADA_8K
-	bool "Marvell Armada-8K PCIe controller"
-	depends on ARCH_MVEBU || COMPILE_TEST
+config PCIE_HISI_STB
+	bool "HiSilicon STB PCIe controller"
+	depends on ARCH_HISI || COMPILE_TEST
 	depends on PCI_MSI
 	select PCIE_DW_HOST
 	help
-	  Say Y here if you want to enable PCIe controller support on
-	  Armada-8K SoCs. The PCIe controller on Armada-8K is based on
-	  DesignWare hardware and therefore the driver re-uses the
-	  DesignWare core functions to implement the driver.
-
-config PCIE_ARTPEC6
-	bool
-
-config PCIE_ARTPEC6_HOST
-	bool "Axis ARTPEC-6 PCIe controller (host mode)"
-	depends on MACH_ARTPEC6 || COMPILE_TEST
-	depends on PCI_MSI
-	select PCIE_DW_HOST
-	select PCIE_ARTPEC6
-	help
-	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
-	  host mode. This uses the DesignWare core.
-
-config PCIE_ARTPEC6_EP
-	bool "Axis ARTPEC-6 PCIe controller (endpoint mode)"
-	depends on MACH_ARTPEC6 || COMPILE_TEST
-	depends on PCI_ENDPOINT
-	select PCIE_DW_EP
-	select PCIE_ARTPEC6
-	help
-	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
-	  endpoint mode. This uses the DesignWare core.
-
-config PCIE_BT1
-	tristate "Baikal-T1 PCIe controller"
-	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
-	depends on PCI_MSI
-	select PCIE_DW_HOST
-	help
-	  Enables support for the PCIe controller in the Baikal-T1 SoC to work
-	  in host mode. It's based on the Synopsys DWC PCIe v4.60a IP-core.
-
-config PCIE_ROCKCHIP_DW_HOST
-	bool "Rockchip DesignWare PCIe controller"
-	select PCIE_DW
-	select PCIE_DW_HOST
-	depends on PCI_MSI
-	depends on ARCH_ROCKCHIP || COMPILE_TEST
-	depends on OF
-	help
-	  Enables support for the DesignWare PCIe controller in the
-	  Rockchip SoC except RK3399.
+	  Say Y here if you want PCIe controller support on HiSilicon STB SoCs
 
 config PCIE_INTEL_GW
 	bool "Intel Gateway PCIe controller "
@@ -302,34 +189,16 @@
 	  The PCIe controller is based on DesignWare Hardware and uses
 	  DesignWare core functions.
 
-config PCIE_KIRIN
-	depends on OF && (ARM64 || COMPILE_TEST)
-	tristate "HiSilicon Kirin PCIe controller"
-	depends on PCI_MSI
-	select PCIE_DW_HOST
-	select REGMAP_MMIO
-	help
-	  Say Y here if you want PCIe controller support
-	  on HiSilicon Kirin series SoCs.
-
-config PCIE_HISI_STB
-	bool "HiSilicon STB PCIe controller"
-	depends on ARCH_HISI || COMPILE_TEST
+config PCIE_ARMADA_8K
+	bool "Marvell Armada-8K PCIe controller"
+	depends on ARCH_MVEBU || COMPILE_TEST
 	depends on PCI_MSI
 	select PCIE_DW_HOST
 	help
-	  Say Y here if you want PCIe controller support on HiSilicon STB SoCs
-
-config PCI_MESON
-	tristate "Amlogic Meson PCIe controller"
-	default m if ARCH_MESON
-	depends on PCI_MSI
-	select PCIE_DW_HOST
-	help
-	  Say Y here if you want to enable PCI controller support on Amlogic
-	  SoCs. The PCI controller on Amlogic is based on DesignWare hardware
-	  and therefore the driver re-uses the DesignWare core functions to
-	  implement the driver.
+	  Say Y here if you want to enable PCIe controller support on
+	  Armada-8K SoCs. The PCIe controller on Armada-8K is based on
+	  DesignWare hardware and therefore the driver re-uses the
+	  DesignWare core functions to implement the driver.
 
 config PCIE_TEGRA194
 	tristate
@@ -364,14 +233,89 @@
 	  in order to enable device-specific features PCIE_TEGRA194_EP must be
 	  selected. This uses the DesignWare core.
 
-config PCIE_VISCONTI_HOST
-	bool "Toshiba Visconti PCIe controller"
-	depends on ARCH_VISCONTI || COMPILE_TEST
+config PCIE_DW_PLAT
+	bool
+
+config PCIE_DW_PLAT_HOST
+	bool "Platform bus based DesignWare PCIe controller (host mode)"
+	depends on PCI_MSI
+	select PCIE_DW_HOST
+	select PCIE_DW_PLAT
+	help
+	  Enables support for the PCIe controller in the Designware IP to
+	  work in host mode. There are two instances of PCIe controller in
+	  Designware IP.
+	  This controller can work either as EP or RC. In order to enable
+	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
+	  order to enable device-specific features PCI_DW_PLAT_EP must be
+	  selected.
+
+config PCIE_DW_PLAT_EP
+	bool "Platform bus based DesignWare PCIe controller (endpoint mode)"
+	depends on PCI && PCI_MSI
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	select PCIE_DW_PLAT
+	help
+	  Enables support for the PCIe controller in the Designware IP to
+	  work in endpoint mode. There are two instances of PCIe controller
+	  in Designware IP.
+	  This controller can work either as EP or RC. In order to enable
+	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
+	  order to enable device-specific features PCI_DW_PLAT_EP must be
+	  selected.
+
+config PCIE_QCOM
+	bool "Qualcomm PCIe controller (host mode)"
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	depends on PCI_MSI
+	select PCIE_DW_HOST
+	select CRC8
+	help
+	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
+	  PCIe controller uses the DesignWare core plus Qualcomm-specific
+	  hardware wrappers.
+
+config PCIE_QCOM_EP
+	tristate "Qualcomm PCIe controller (endpoint mode)"
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	help
+	  Say Y here to enable support for the PCIe controllers on Qualcomm SoCs
+	  to work in endpoint mode. The PCIe controller uses the DesignWare core
+	  plus Qualcomm-specific hardware wrappers.
+
+config PCIE_ROCKCHIP_DW_HOST
+	bool "Rockchip DesignWare PCIe controller"
+	select PCIE_DW
+	select PCIE_DW_HOST
+	depends on PCI_MSI
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on OF
+	help
+	  Enables support for the DesignWare PCIe controller in the
+	  Rockchip SoC except RK3399.
+
+config PCI_EXYNOS
+	tristate "Samsung Exynos PCIe controller"
+	depends on ARCH_EXYNOS || COMPILE_TEST
 	depends on PCI_MSI
 	select PCIE_DW_HOST
 	help
-	  Say Y here if you want PCIe controller support on Toshiba Visconti SoC.
-	  This driver supports TMPV7708 SoC.
+	  Enables support for the PCIe controller in the Samsung Exynos SoCs
+	  to work in host mode. The PCI controller is based on the DesignWare
+	  hardware and therefore the driver re-uses the DesignWare core
+	  functions to implement the driver.
+
+config PCIE_FU740
+	bool "SiFive FU740 PCIe controller"
+	depends on PCI_MSI
+	depends on SOC_SIFIVE || COMPILE_TEST
+	select PCIE_DW_HOST
+	help
+	  Say Y here if you want PCIe controller support for the SiFive
+	  FU740.
 
 config PCIE_UNIPHIER
 	bool "Socionext UniPhier PCIe controller (host mode)"
@@ -393,26 +337,82 @@
 	  Say Y here if you want PCIe endpoint controller support on
 	  UniPhier SoCs. This driver supports Pro5 SoC.
 
-config PCIE_AL
-	bool "Amazon Annapurna Labs PCIe controller"
-	depends on OF && (ARM64 || COMPILE_TEST)
+config PCIE_SPEAR13XX
+	bool "STMicroelectronics SPEAr PCIe controller"
+	depends on ARCH_SPEAR13XX || COMPILE_TEST
 	depends on PCI_MSI
 	select PCIE_DW_HOST
-	select PCI_ECAM
 	help
-	  Say Y here to enable support of the Amazon's Annapurna Labs PCIe
-	  controller IP on Amazon SoCs. The PCIe controller uses the DesignWare
-	  core plus Annapurna Labs proprietary hardware wrappers. This is
-	  required only for DT-based platforms. ACPI platforms with the
-	  Annapurna Labs PCIe controller don't need to enable this.
+	  Say Y here if you want PCIe support on SPEAr13XX SoCs.
 
-config PCIE_FU740
-	bool "SiFive FU740 PCIe controller"
+config PCI_DRA7XX
+	tristate
+
+config PCI_DRA7XX_HOST
+	tristate "TI DRA7xx PCIe controller (host mode)"
+	depends on SOC_DRA7XX || COMPILE_TEST
+	depends on OF && HAS_IOMEM && TI_PIPE3
 	depends on PCI_MSI
-	depends on SOC_SIFIVE || COMPILE_TEST
+	select PCIE_DW_HOST
+	select PCI_DRA7XX
+	default y if SOC_DRA7XX
+	help
+	  Enables support for the PCIe controller in the DRA7xx SoC to work in
+	  host mode. There are two instances of PCIe controller in DRA7xx.
+	  This controller can work either as EP or RC. In order to enable
+	  host-specific features PCI_DRA7XX_HOST must be selected and in order
+	  to enable device-specific features PCI_DRA7XX_EP must be selected.
+	  This uses the DesignWare core.
+
+config PCI_DRA7XX_EP
+	tristate "TI DRA7xx PCIe controller (endpoint mode)"
+	depends on SOC_DRA7XX || COMPILE_TEST
+	depends on OF && HAS_IOMEM && TI_PIPE3
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	select PCI_DRA7XX
+	help
+	  Enables support for the PCIe controller in the DRA7xx SoC to work in
+	  endpoint mode. There are two instances of PCIe controller in DRA7xx.
+	  This controller can work either as EP or RC. In order to enable
+	  host-specific features PCI_DRA7XX_HOST must be selected and in order
+	  to enable device-specific features PCI_DRA7XX_EP must be selected.
+	  This uses the DesignWare core.
+
+config PCI_KEYSTONE
+	bool
+
+config PCI_KEYSTONE_HOST
+	bool "TI Keystone PCIe controller (host mode)"
+	depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	depends on PCI_MSI
+	select PCIE_DW_HOST
+	select PCI_KEYSTONE
+	help
+	  Enables support for the PCIe controller in the Keystone SoC to
+	  work in host mode. The PCI controller on Keystone is based on
+	  DesignWare hardware and therefore the driver re-uses the
+	  DesignWare core functions to implement the driver.
+
+config PCI_KEYSTONE_EP
+	bool "TI Keystone PCIe controller (endpoint mode)"
+	depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	select PCI_KEYSTONE
+	help
+	  Enables support for the PCIe controller in the Keystone SoC to
+	  work in endpoint mode. The PCI controller on Keystone is based
+	  on DesignWare hardware and therefore the driver re-uses the
+	  DesignWare core functions to implement the driver.
+
+config PCIE_VISCONTI_HOST
+	bool "Toshiba Visconti PCIe controller"
+	depends on ARCH_VISCONTI || COMPILE_TEST
+	depends on PCI_MSI
 	select PCIE_DW_HOST
 	help
-	  Say Y here if you want PCIe controller support for the SiFive
-	  FU740.
+	  Say Y here if you want PCIe controller support on Toshiba Visconti SoC.
+	  This driver supports TMPV7708 SoC.
 
 endmenu