# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Brcmstb PCIe Host Controller Device Tree Bindings

maintainers:
  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

properties:
  compatible:
    items:
      - enum:
          - brcm,bcm2711-pcie # The Raspberry Pi 4
          - brcm,bcm4908-pcie
          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
          - brcm,bcm7278-pcie # Broadcom 7278 Arm
          - brcm,bcm7216-pcie # Broadcom 7216 Arm
          - brcm,bcm7445-pcie # Broadcom 7445 Arm

  reg:
    maxItems: 1

  interrupts:
    minItems: 1
    items:
      - description: PCIe host controller
      - description: builtin MSI controller

  interrupt-names:
    minItems: 1
    items:
      - const: pcie
      - const: msi

  ranges:
    minItems: 1
    maxItems: 4

  dma-ranges:
    minItems: 1
    maxItems: 6

  clocks:
    maxItems: 1

  clock-names:
    items:
      - const: sw_pcie

  msi-controller:
    description: Identifies the node as an MSI controller.

  msi-parent:
    description: MSI controller the device is capable of using.

  brcm,enable-ssc:
    description: Indicates usage of spread-spectrum clocking.
    type: boolean

  aspm-no-l0s: true

  brcm,scb-sizes:
    description: u64 giving the 64bit PCIe memory
      viewport size of a memory controller.  There may be up to
      three controllers, and each size must be a power of two
      with a size greater or equal to the amount of memory the
      controller supports.  Note that each memory controller
      may have two component regions -- base and extended -- so
      this information cannot be deduced from the dma-ranges.
    $ref: /schemas/types.yaml#/definitions/uint64-array
    items:
      minItems: 1
      maxItems: 3

required:
  - reg
  - ranges
  - dma-ranges
  - "#interrupt-cells"
  - interrupts
  - interrupt-names
  - interrupt-map-mask
  - interrupt-map
  - msi-controller

allOf:
  - $ref: /schemas/pci/pci-bus.yaml#
  - if:
      properties:
        compatible:
          contains:
            const: brcm,bcm4908-pcie
    then:
      properties:
        resets:
          items:
            - description: reset controller handling the PERST# signal

        reset-names:
          items:
            - const: perst

      required:
        - resets
        - reset-names
  - if:
      properties:
        compatible:
          contains:
            const: brcm,bcm7216-pcie
    then:
      properties:
        resets:
          items:
            - description: phandle pointing to the RESCAL reset controller

        reset-names:
          items:
            - const: rescal

      required:
        - resets
        - reset-names

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    scb {
            #address-cells = <2>;
            #size-cells = <1>;
            pcie0: pcie@7d500000 {
                    compatible = "brcm,bcm2711-pcie";
                    reg = <0x0 0x7d500000 0x9310>;
                    device_type = "pci";
                    #address-cells = <3>;
                    #size-cells = <2>;
                    #interrupt-cells = <1>;
                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
                    interrupt-names = "pcie", "msi";
                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
                    msi-parent = <&pcie0>;
                    msi-controller;
                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
                    brcm,enable-ssc;
                    brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
            };
    };