| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* Copyright(c) 1999 - 2018 Intel Corporation. */ |
| |
| #ifndef _E1000E_80003ES2LAN_H_ |
| #define _E1000E_80003ES2LAN_H_ |
| |
| #define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00 |
| #define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02 |
| #define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10 |
| #define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F |
| |
| #define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008 |
| #define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800 |
| #define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010 |
| |
| #define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004 |
| #define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000 |
| #define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000 |
| |
| #define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C |
| #define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004 |
| |
| #define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gig Carry Extend Padding */ |
| #define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000 |
| |
| #define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8 |
| #define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9 |
| |
| /* GG82563 PHY Specific Status Register (Page 0, Register 16 */ |
| #define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Dis */ |
| #define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060 |
| #define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */ |
| #define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */ |
| #define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */ |
| |
| /* PHY Specific Control Register 2 (Page 0, Register 26) */ |
| #define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Neg */ |
| |
| /* MAC Specific Control Register (Page 2, Register 21) */ |
| /* Tx clock speed for Link Down and 1000BASE-T for the following speeds */ |
| #define GG82563_MSCR_TX_CLK_MASK 0x0007 |
| #define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004 |
| #define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005 |
| #define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007 |
| |
| #define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */ |
| |
| /* DSP Distance Register (Page 5, Register 26) |
| * 0 = <50M |
| * 1 = 50-80M |
| * 2 = 80-100M |
| * 3 = 110-140M |
| * 4 = >140M |
| */ |
| #define GG82563_DSPD_CABLE_LENGTH 0x0007 |
| |
| /* Kumeran Mode Control Register (Page 193, Register 16) */ |
| #define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800 |
| |
| /* Max number of times Kumeran read/write should be validated */ |
| #define GG82563_MAX_KMRN_RETRY 0x5 |
| |
| /* Power Management Control Register (Page 193, Register 20) */ |
| /* 1=Enable SERDES Electrical Idle */ |
| #define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 |
| |
| /* In-Band Control Register (Page 194, Register 18) */ |
| #define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */ |
| |
| #endif |
