diff --git a/drivers/mfd/db8500-prcmu-regs.h b/drivers/mfd/db8500-prcmu-regs.h
index 3bbf04d..ec22e9f 100644
--- a/drivers/mfd/db8500-prcmu-regs.h
+++ b/drivers/mfd/db8500-prcmu-regs.h
@@ -9,99 +9,170 @@
  *
  * PRCM Unit registers
  */
+
 #ifndef __DB8500_PRCMU_REGS_H
 #define __DB8500_PRCMU_REGS_H
 
-#include <linux/bitops.h>
 #include <mach/hardware.h>
 
 #define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
 
-#define PRCM_ARM_PLLDIVPS 0x118
-#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE	BITS(0, 5)
-#define PRCM_ARM_PLLDIVPS_MAX_MASK	0xF
+#define PRCM_SVACLK_MGT_OFF		0x008
+#define PRCM_SIACLK_MGT_OFF		0x00C
+#define PRCM_SGACLK_MGT_OFF		0x014
+#define PRCM_UARTCLK_MGT_OFF		0x018
+#define PRCM_MSP02CLK_MGT_OFF		0x01C
+#define PRCM_I2CCLK_MGT_OFF		0x020
+#define PRCM_SDMMCCLK_MGT_OFF		0x024
+#define PRCM_SLIMCLK_MGT_OFF		0x028
+#define PRCM_PER1CLK_MGT_OFF		0x02C
+#define PRCM_PER2CLK_MGT_OFF		0x030
+#define PRCM_PER3CLK_MGT_OFF		0x034
+#define PRCM_PER5CLK_MGT_OFF		0x038
+#define PRCM_PER6CLK_MGT_OFF		0x03C
+#define PRCM_PER7CLK_MGT_OFF		0x040
+#define PRCM_PWMCLK_MGT_OFF		0x044 /* for DB5500 */
+#define PRCM_IRDACLK_MGT_OFF		0x048 /* for DB5500 */
+#define PRCM_IRRCCLK_MGT_OFF		0x04C /* for DB5500 */
+#define PRCM_LCDCLK_MGT_OFF		0x044
+#define PRCM_BMLCLK_MGT_OFF		0x04C
+#define PRCM_HSITXCLK_MGT_OFF		0x050
+#define PRCM_HSIRXCLK_MGT_OFF		0x054
+#define PRCM_HDMICLK_MGT_OFF		0x058
+#define PRCM_APEATCLK_MGT_OFF		0x05C
+#define PRCM_APETRACECLK_MGT_OFF	0x060
+#define PRCM_MCDECLK_MGT_OFF		0x064
+#define PRCM_IPI2CCLK_MGT_OFF		0x068
+#define PRCM_DSIALTCLK_MGT_OFF		0x06C
+#define PRCM_DMACLK_MGT_OFF		0x074
+#define PRCM_B2R2CLK_MGT_OFF		0x078
+#define PRCM_TVCLK_MGT_OFF		0x07C
+#define PRCM_UNIPROCLK_MGT_OFF		0x278
+#define PRCM_SSPCLK_MGT_OFF		0x280
+#define PRCM_RNGCLK_MGT_OFF		0x284
+#define PRCM_UICCCLK_MGT_OFF		0x27C
+#define PRCM_MSP1CLK_MGT_OFF		0x288
 
-#define PRCM_PLLARM_LOCKP 0x0A8
-#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 BIT(1)
+#define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
+#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE		0x3f
+#define PRCM_ARM_PLLDIVPS_MAX_MASK		0xf
 
-#define PRCM_ARM_CHGCLKREQ 0x114
-#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0)
+#define PRCM_PLLARM_LOCKP       (_PRCMU_BASE + 0x0a8)
+#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3	0x2
 
-#define PRCM_PLLARM_ENABLE 0x98
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE	BIT(0)
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON	BIT(8)
+#define PRCM_ARM_CHGCLKREQ	(_PRCMU_BASE + 0x114)
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ	0x1
 
-#define PRCM_ARMCLKFIX_MGT	0x0
-#define PRCM_A9_RESETN_CLR	0x1f4
-#define PRCM_A9_RESETN_SET	0x1f0
-#define PRCM_ARM_LS_CLAMP	0x30C
-#define PRCM_SRAM_A9		0x308
+#define PRCM_PLLARM_ENABLE	(_PRCMU_BASE + 0x98)
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE	0x1
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON	0x100
+
+#define PRCM_ARMCLKFIX_MGT	(_PRCMU_BASE + 0x0)
+#define PRCM_A9PL_FORCE_CLKEN	(_PRCMU_BASE + 0x19C)
+#define PRCM_A9_RESETN_CLR	(_PRCMU_BASE + 0x1f4)
+#define PRCM_A9_RESETN_SET	(_PRCMU_BASE + 0x1f0)
+#define PRCM_ARM_LS_CLAMP	(_PRCMU_BASE + 0x30c)
+#define PRCM_SRAM_A9		(_PRCMU_BASE + 0x308)
+
+#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN BIT(0)
+#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN BIT(1)
 
 /* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY	0x130
-#define PRCM_IOCR		0x310
-#define PRCM_IOCR_IOFORCE BIT(0)
+#define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
+#define PRCM_IOCR		(_PRCMU_BASE + 0x310)
+#define PRCM_IOCR_IOFORCE			0x1
 
 /* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL 0x0FC
-#define PRCM_MBOX_CPU_SET 0x100
+#define PRCM_MBOX_CPU_VAL	(_PRCMU_BASE + 0x0fc)
+#define PRCM_MBOX_CPU_SET	(_PRCMU_BASE + 0x100)
+#define PRCM_MBOX_CPU_CLR	(_PRCMU_BASE + 0x104)
 
 /* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ 0x328
-#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ BIT(0)
+#define PRCM_A9_MASK_REQ	(_PRCMU_BASE + 0x328)
+#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ	0x1
 
-#define PRCM_A9_MASK_ACK	0x32C
-#define PRCM_ARMITMSK31TO0	0x11C
-#define PRCM_ARMITMSK63TO32	0x120
-#define PRCM_ARMITMSK95TO64	0x124
-#define PRCM_ARMITMSK127TO96	0x128
-#define PRCM_POWER_STATE_VAL	0x25C
-#define PRCM_ARMITVAL31TO0	0x260
-#define PRCM_ARMITVAL63TO32	0x264
-#define PRCM_ARMITVAL95TO64	0x268
-#define PRCM_ARMITVAL127TO96	0x26C
+#define PRCM_A9_MASK_ACK	(_PRCMU_BASE + 0x32c)
+#define PRCM_ARMITMSK31TO0	(_PRCMU_BASE + 0x11c)
+#define PRCM_ARMITMSK63TO32	(_PRCMU_BASE + 0x120)
+#define PRCM_ARMITMSK95TO64	(_PRCMU_BASE + 0x124)
+#define PRCM_ARMITMSK127TO96	(_PRCMU_BASE + 0x128)
+#define PRCM_POWER_STATE_VAL	(_PRCMU_BASE + 0x25C)
+#define PRCM_ARMITVAL31TO0	(_PRCMU_BASE + 0x260)
+#define PRCM_ARMITVAL63TO32	(_PRCMU_BASE + 0x264)
+#define PRCM_ARMITVAL95TO64	(_PRCMU_BASE + 0x268)
+#define PRCM_ARMITVAL127TO96	(_PRCMU_BASE + 0x26C)
 
-#define PRCM_HOSTACCESS_REQ 0x334
-#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ BIT(0)
+#define PRCM_HOSTACCESS_REQ	(_PRCMU_BASE + 0x334)
+#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ 0x1
+#define ARM_WAKEUP_MODEM	0x1
 
-#define PRCM_ARM_IT1_CLR 0x48C
-#define PRCM_ARM_IT1_VAL 0x494
+#define PRCM_ARM_IT1_CLR	(_PRCMU_BASE + 0x48C)
+#define PRCM_ARM_IT1_VAL	(_PRCMU_BASE + 0x494)
+#define PRCM_HOLD_EVT		(_PRCMU_BASE + 0x174)
 
-#define PRCM_ITSTATUS0		0x148
-#define PRCM_ITSTATUS1		0x150
-#define PRCM_ITSTATUS2		0x158
-#define PRCM_ITSTATUS3		0x160
-#define PRCM_ITSTATUS4		0x168
-#define PRCM_ITSTATUS5		0x484
-#define PRCM_ITCLEAR5		0x488
-#define PRCM_ARMIT_MASKXP70_IT	0x1018
+#define PRCM_MOD_AWAKE_STATUS	(_PRCMU_BASE + 0x4A0)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE	BIT(0)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE	BIT(1)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_VMODEM_OFF_ISO	BIT(2)
+
+#define PRCM_ITSTATUS0		(_PRCMU_BASE + 0x148)
+#define PRCM_ITSTATUS1		(_PRCMU_BASE + 0x150)
+#define PRCM_ITSTATUS2		(_PRCMU_BASE + 0x158)
+#define PRCM_ITSTATUS3		(_PRCMU_BASE + 0x160)
+#define PRCM_ITSTATUS4		(_PRCMU_BASE + 0x168)
+#define PRCM_ITSTATUS5		(_PRCMU_BASE + 0x484)
+#define PRCM_ITCLEAR5		(_PRCMU_BASE + 0x488)
+#define PRCM_ARMIT_MASKXP70_IT	(_PRCMU_BASE + 0x1018)
 
 /* System reset register */
-#define PRCM_APE_SOFTRST 0x228
+#define PRCM_APE_SOFTRST	(_PRCMU_BASE + 0x228)
 
 /* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET 0x420
-#define PRCM_MMIP_LS_CLAMP_CLR 0x424
-
-/* PRCMU HW semaphore */
-#define PRCM_SEM 0x400
-#define PRCM_SEM_PRCM_SEM BIT(0)
+#define PRCM_MMIP_LS_CLAMP_SET     (_PRCMU_BASE + 0x420)
+#define PRCM_MMIP_LS_CLAMP_CLR     (_PRCMU_BASE + 0x424)
 
 /* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLDSI_FREQ	0x500
-#define PRCM_PLLDSI_ENABLE	0x504
-#define PRCM_PLLDSI_LOCKP	0x508
-#define PRCM_DSI_PLLOUT_SEL	0x530
-#define PRCM_DSITVCLK_DIV	0x52C
-#define PRCM_APE_RESETN_SET	0x1E4
-#define PRCM_APE_RESETN_CLR	0x1E8
+#define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
+#define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
+#define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
+#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + PRCM_LCDCLK_MGT_OFF)
+#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + PRCM_MCDECLK_MGT_OFF)
+#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + PRCM_HDMICLK_MGT_OFF)
+#define PRCM_TVCLK_MGT             (_PRCMU_BASE + PRCM_TVCLK_MGT_OFF)
+#define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
+#define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
+#define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
+#define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
+#define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
 
-#define PRCM_TCR		0x1C8
-#define PRCM_TCR_TENSEL_MASK	BITS(0, 7)
-#define PRCM_TCR_STOP_TIMERS	BIT(16)
-#define PRCM_TCR_DOZE_MODE	BIT(17)
+#define PRCM_CLKOCR		   (_PRCMU_BASE + 0x1CC)
+#define PRCM_CLKOCR_CLKOUT0_REF_CLK	(1 << 0)
+#define PRCM_CLKOCR_CLKOUT0_MASK	BITS(0, 13)
+#define PRCM_CLKOCR_CLKOUT1_REF_CLK	(1 << 16)
+#define PRCM_CLKOCR_CLKOUT1_MASK	BITS(16, 29)
 
-#define PRCM_CLKOCR			0x1CC
+/* ePOD and memory power signal control registers */
+#define PRCM_EPOD_C_SET            (_PRCMU_BASE + 0x410)
+#define PRCM_SRAM_LS_SLEEP         (_PRCMU_BASE + 0x304)
+
+/* Debug power control unit registers */
+#define PRCM_POWER_STATE_SET       (_PRCMU_BASE + 0x254)
+
+/* Miscellaneous unit registers */
+#define PRCM_DSI_SW_RESET          (_PRCMU_BASE + 0x324)
+#define PRCM_GPIOCR                (_PRCMU_BASE + 0x138)
+#define PRCM_GPIOCR_DBG_STM_MOD_CMD1            0x800
+#define PRCM_GPIOCR_DBG_UARTMOD_CMD0            0x1
+
+/* PRCMU HW semaphore */
+#define PRCM_SEM                   (_PRCMU_BASE + 0x400)
+#define PRCM_SEM_PRCM_SEM BIT(0)
+
+#define PRCM_TCR                   (_PRCMU_BASE + 0x1C8)
+#define PRCM_TCR_TENSEL_MASK       BITS(0, 7)
+#define PRCM_TCR_STOP_TIMERS       BIT(16)
+#define PRCM_TCR_DOZE_MODE         BIT(17)
+
 #define PRCM_CLKOCR_CLKODIV0_SHIFT	0
 #define PRCM_CLKOCR_CLKODIV0_MASK	BITS(0, 5)
 #define PRCM_CLKOCR_CLKOSEL0_SHIFT	6
@@ -112,55 +183,22 @@
 #define PRCM_CLKOCR_CLKOSEL1_MASK	BITS(22, 24)
 #define PRCM_CLKOCR_CLK1TYPE		BIT(28)
 
-#define PRCM_SGACLK_MGT		0x014
-#define PRCM_UARTCLK_MGT	0x018
-#define PRCM_MSP02CLK_MGT	0x01C
-#define PRCM_MSP1CLK_MGT	0x288
-#define PRCM_I2CCLK_MGT		0x020
-#define PRCM_SDMMCCLK_MGT	0x024
-#define PRCM_SLIMCLK_MGT	0x028
-#define PRCM_PER1CLK_MGT	0x02C
-#define PRCM_PER2CLK_MGT	0x030
-#define PRCM_PER3CLK_MGT	0x034
-#define PRCM_PER5CLK_MGT	0x038
-#define PRCM_PER6CLK_MGT	0x03C
-#define PRCM_PER7CLK_MGT	0x040
-#define PRCM_LCDCLK_MGT		0x044
-#define PRCM_BMLCLK_MGT		0x04C
-#define PRCM_HSITXCLK_MGT	0x050
-#define PRCM_HSIRXCLK_MGT	0x054
-#define PRCM_HDMICLK_MGT	0x058
-#define PRCM_APEATCLK_MGT	0x05C
-#define PRCM_APETRACECLK_MGT	0x060
-#define PRCM_MCDECLK_MGT	0x064
-#define PRCM_IPI2CCLK_MGT	0x068
-#define PRCM_DSIALTCLK_MGT	0x06C
-#define PRCM_DMACLK_MGT		0x074
-#define PRCM_B2R2CLK_MGT	0x078
-#define PRCM_TVCLK_MGT		0x07C
-#define PRCM_UNIPROCLK_MGT	0x278
-#define PRCM_SSPCLK_MGT		0x280
-#define PRCM_RNGCLK_MGT		0x284
-#define PRCM_UICCCLK_MGT	0x27C
-
 #define PRCM_CLK_MGT_CLKPLLDIV_MASK	BITS(0, 4)
 #define PRCM_CLK_MGT_CLKPLLSW_MASK	BITS(5, 7)
 #define PRCM_CLK_MGT_CLKEN		BIT(8)
 
-/* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET		0x410
-#define PRCM_SRAM_LS_SLEEP	0x304
-
-/* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET 0x254
-
-/* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET 0x324
-#define PRCM_GPIOCR		0x138
-
 /* GPIOCR register */
 #define PRCM_GPIOCR_SPI2_SELECT BIT(23)
 
-#define PRCM_DDR_SUBSYS_APE_MINBW  0x438
+#define PRCM_DDR_SUBSYS_APE_MINBW	(_PRCMU_BASE + 0x438)
+#define PRCM_CGATING_BYPASS		(_PRCMU_BASE + 0x134)
+#define PRCM_CGATING_BYPASS_ICN2	BIT(6)
+
+/* Miscellaneous unit registers */
+#define PRCM_RESOUTN_SET		(_PRCMU_BASE + 0x214)
+#define PRCM_RESOUTN_CLR		(_PRCMU_BASE + 0x218)
+
+/* System reset register */
+#define PRCM_APE_SOFTRST		(_PRCMU_BASE + 0x228)
 
 #endif /* __DB8500_PRCMU_REGS_H */
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 02a15d7..b5bd245 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -412,7 +412,7 @@
 
 static DEFINE_SPINLOCK(clk_mgt_lock);
 
-#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT), 0 }
+#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT_OFF), 0 }
 struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
 	CLK_MGT_ENTRY(SGACLK),
 	CLK_MGT_ENTRY(UARTCLK),
@@ -499,45 +499,41 @@
 	unsigned int plldsifreq;
 
 	/* Clear DSIPLL_RESETN */
-	writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_CLR));
+	writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
 	/* Unclamp DSIPLL in/out */
-	writel(PRCMU_UNCLAMP_DSIPLL, (_PRCMU_BASE + PRCM_MMIP_LS_CLAMP_CLR));
+	writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
 
 	if (prcmu_is_u8400())
 		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400;
 	else
 		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING;
 	/* Set DSI PLL FREQ */
-	writel(plldsifreq, (_PRCMU_BASE + PRCM_PLLDSI_FREQ));
-	writel(PRCMU_DSI_PLLOUT_SEL_SETTING,
-		(_PRCMU_BASE + PRCM_DSI_PLLOUT_SEL));
+	writel(plldsifreq, PRCM_PLLDSI_FREQ);
+	writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL);
 	/* Enable Escape clocks */
-	writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV,
-					(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+	writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
 
 	/* Start DSI PLL */
-	writel(PRCMU_ENABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+	writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
 	/* Reset DSI PLL */
-	writel(PRCMU_DSI_RESET_SW, (_PRCMU_BASE + PRCM_DSI_SW_RESET));
+	writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
 	for (i = 0; i < 10; i++) {
-		if ((readl(_PRCMU_BASE + PRCM_PLLDSI_LOCKP) &
-			PRCMU_PLLDSI_LOCKP_LOCKED)
+		if ((readl(PRCM_PLLDSI_LOCKP) & PRCMU_PLLDSI_LOCKP_LOCKED)
 					== PRCMU_PLLDSI_LOCKP_LOCKED)
 			break;
 		udelay(100);
 	}
 	/* Set DSIPLL_RESETN */
-	writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_SET));
+	writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET);
 	return 0;
 }
 
 int prcmu_disable_dsipll(void)
 {
 	/* Disable dsi pll */
-	writel(PRCMU_DISABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+	writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
 	/* Disable  escapeclock */
-	writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV,
-					(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+	writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
 	return 0;
 }
 
@@ -554,15 +550,15 @@
 	spin_lock_irqsave(&clk_mgt_lock, flags);
 
 	/* Grab the HW semaphore. */
-	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
-	writel(dsiclk, (_PRCMU_BASE + PRCM_HDMICLK_MGT));
-	writel(PRCMU_DSI_LP_CLOCK_SETTING, (_PRCMU_BASE + PRCM_TVCLK_MGT));
-	writel(PRCMU_DPI_CLOCK_SETTING, (_PRCMU_BASE + PRCM_LCDCLK_MGT));
+	writel(dsiclk, PRCM_HDMICLK_MGT);
+	writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
+	writel(PRCMU_DPI_CLOCK_SETTING, PRCM_LCDCLK_MGT);
 
 	/* Release the HW semaphore. */
-	writel(0, (_PRCMU_BASE + PRCM_SEM));
+	writel(0, PRCM_SEM);
 
 	spin_unlock_irqrestore(&clk_mgt_lock, flags);
 
@@ -578,8 +574,8 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&gpiocr_lock, flags);
-	reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
-	writel(reg | PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+	reg = readl(PRCM_GPIOCR);
+	writel(reg | PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
 	spin_unlock_irqrestore(&gpiocr_lock, flags);
 }
 
@@ -592,8 +588,8 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&gpiocr_lock, flags);
-	reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
-	writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+	reg = readl(PRCM_GPIOCR);
+	writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
 	spin_unlock_irqrestore(&gpiocr_lock, flags);
 }
 
@@ -701,7 +697,7 @@
 
 	spin_lock_irqsave(&clkout_lock, flags);
 
-	val = readl(_PRCMU_BASE + PRCM_CLKOCR);
+	val = readl(PRCM_CLKOCR);
 	if (val & div_mask) {
 		if (div) {
 			if ((val & mask) != bits) {
@@ -715,7 +711,7 @@
 			}
 		}
 	}
-	writel((bits | (val & ~mask)), (_PRCMU_BASE + PRCM_CLKOCR));
+	writel((bits | (val & ~mask)), PRCM_CLKOCR);
 	requests[clkout] += (div ? 1 : -1);
 
 unlock_and_return:
@@ -732,7 +728,7 @@
 
 	spin_lock_irqsave(&mb0_transfer.lock, flags);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
 		cpu_relax();
 
 	writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
@@ -741,7 +737,7 @@
 	writeb((keep_ulp_clk ? 1 : 0),
 		(tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE));
 	writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI));
-	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
 
 	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
 
@@ -770,12 +766,12 @@
 		return;
 
 	for (i = 0; i < 2; i++) {
-		while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+		while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
 			cpu_relax();
 		writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500));
 		writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500));
 		writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
-		writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+		writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
 	}
 	last_dbb_events = dbb_events;
 	last_abb_events = abb_events;
@@ -840,14 +836,14 @@
 
 	mutex_lock(&mb1_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 	writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
 	writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
 
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
@@ -876,7 +872,7 @@
  */
 int prcmu_get_ddr_opp(void)
 {
-	return readb(_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW);
+	return readb(PRCM_DDR_SUBSYS_APE_MINBW);
 }
 
 /**
@@ -892,7 +888,7 @@
 		return -EINVAL;
 	/* Changing the DDR OPP can hang the hardware pre-v21 */
 	if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20())
-		writeb(opp, (_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW));
+		writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW);
 
 	return 0;
 }
@@ -909,14 +905,14 @@
 
 	mutex_lock(&mb1_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 	writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
 	writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
 
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
@@ -966,12 +962,12 @@
 		header = MB1H_RELEASE_APE_OPP_100_VOLT;
 	}
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	if ((mb1_transfer.ack.header != header) ||
@@ -995,13 +991,13 @@
 
 	mutex_lock(&mb1_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(MB1H_RELEASE_USB_WAKEUP,
 		(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) ||
@@ -1048,7 +1044,7 @@
 	mutex_lock(&mb2_transfer.lock);
 
 	/* wait for mailbox */
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
 		cpu_relax();
 
 	/* fill in mailbox */
@@ -1058,7 +1054,7 @@
 
 	writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2));
 
-	writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(2), PRCM_MBOX_CPU_SET);
 
 	/*
 	 * The current firmware version does not handle errors correctly,
@@ -1145,13 +1141,13 @@
 
 	spin_lock_irqsave(&mb3_transfer.lock, flags);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
 		cpu_relax();
 
 	writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT));
 
 	writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3));
-	writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(3), PRCM_MBOX_CPU_SET);
 
 	spin_unlock_irqrestore(&mb3_transfer.lock, flags);
 
@@ -1177,7 +1173,7 @@
 
 	if (!enable)
 		val |= PRCM_TCR_STOP_TIMERS;
-	writel(val, (_PRCMU_BASE + PRCM_TCR));
+	writel(val, PRCM_TCR);
 
 	return 0;
 }
@@ -1190,7 +1186,7 @@
 	spin_lock_irqsave(&clk_mgt_lock, flags);
 
 	/* Grab the HW semaphore. */
-	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
 	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
@@ -1203,7 +1199,7 @@
 	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
 
 	/* Release the HW semaphore. */
-	writel(0, (_PRCMU_BASE + PRCM_SEM));
+	writel(0, PRCM_SEM);
 
 	spin_unlock_irqrestore(&clk_mgt_lock, flags);
 
@@ -1238,7 +1234,7 @@
 
 	mutex_lock(&mb4_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
 		cpu_relax();
 
 	writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
@@ -1248,7 +1244,7 @@
 	       (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE));
 	writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST));
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb4_transfer.work);
 
 	mutex_unlock(&mb4_transfer.lock);
@@ -1260,13 +1256,13 @@
 {
 	mutex_lock(&mb4_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
 		cpu_relax();
 
 	writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD));
 	writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb4_transfer.work);
 
 	mutex_unlock(&mb4_transfer.lock);
@@ -1278,7 +1274,7 @@
 {
 	mutex_lock(&mb4_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
 		cpu_relax();
 
 	writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW));
@@ -1287,7 +1283,7 @@
 		(tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG));
 	writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb4_transfer.work);
 
 	mutex_unlock(&mb4_transfer.lock);
@@ -1299,13 +1295,13 @@
 {
 	mutex_lock(&mb4_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
 		cpu_relax();
 
 	writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD));
 	writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb4_transfer.work);
 
 	mutex_unlock(&mb4_transfer.lock);
@@ -1345,7 +1341,7 @@
 	spin_lock_irqsave(&clk_mgt_lock, flags);
 
 	/* Grab the HW semaphore. */
-	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
 	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
@@ -1354,7 +1350,7 @@
 	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
 
 	/* Release the HW semaphore. */
-	writel(0, (_PRCMU_BASE + PRCM_SEM));
+	writel(0, PRCM_SEM);
 
 	spin_unlock_irqrestore(&clk_mgt_lock, flags);
 
@@ -1380,7 +1376,7 @@
 
 	mutex_lock(&mb5_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
 		cpu_relax();
 
 	writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
@@ -1388,7 +1384,7 @@
 	writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
 	writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
 
-	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
 
 	if (!wait_for_completion_timeout(&mb5_transfer.work,
 				msecs_to_jiffies(20000))) {
@@ -1426,7 +1422,7 @@
 
 	mutex_lock(&mb5_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
 		cpu_relax();
 
 	writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
@@ -1434,7 +1430,7 @@
 	writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
 	writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
 
-	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
 
 	if (!wait_for_completion_timeout(&mb5_transfer.work,
 				msecs_to_jiffies(20000))) {
@@ -1459,14 +1455,13 @@
 
 	mutex_lock(&mb0_transfer.ac_wake_lock);
 
-	val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
+	val = readl(PRCM_HOSTACCESS_REQ);
 	if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)
 		goto unlock_and_return;
 
 	atomic_set(&ac_wake_req_state, 1);
 
-	writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
-		(_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
+	writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), PRCM_HOSTACCESS_REQ);
 
 	if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
 			msecs_to_jiffies(20000))) {
@@ -1487,12 +1482,12 @@
 
 	mutex_lock(&mb0_transfer.ac_wake_lock);
 
-	val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
+	val = readl(PRCM_HOSTACCESS_REQ);
 	if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ))
 		goto unlock_and_return;
 
 	writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
-		(_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
+		PRCM_HOSTACCESS_REQ);
 
 	if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
 			msecs_to_jiffies(20000))) {
@@ -1520,7 +1515,7 @@
 void prcmu_system_reset(u16 reset_code)
 {
 	writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON));
-	writel(1, (_PRCMU_BASE + PRCM_APE_SOFTRST));
+	writel(1, PRCM_APE_SOFTRST);
 }
 
 /**
@@ -1530,11 +1525,11 @@
 {
 	mutex_lock(&mb1_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	/*
@@ -1551,11 +1546,11 @@
 
 	spin_lock_irqsave(&mb0_transfer.lock, flags);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
 		cpu_relax();
 
 	writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
-	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
 
 	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
 }
@@ -1600,7 +1595,7 @@
 		r = false;
 		break;
 	}
-	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
 	return r;
 }
 
@@ -1613,7 +1608,7 @@
 		PRCM_ACK_MB1_CURRENT_APE_OPP);
 	mb1_transfer.ack.ape_voltage_status = readb(tcdm_base +
 		PRCM_ACK_MB1_APE_VOLTAGE_STATUS);
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
 	complete(&mb1_transfer.work);
 	return false;
 }
@@ -1621,14 +1616,14 @@
 static bool read_mailbox_2(void)
 {
 	mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS);
-	writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
 	complete(&mb2_transfer.work);
 	return false;
 }
 
 static bool read_mailbox_3(void)
 {
-	writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
@@ -1650,7 +1645,7 @@
 		break;
 	}
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
 
 	if (do_complete)
 		complete(&mb4_transfer.work);
@@ -1662,20 +1657,20 @@
 {
 	mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS);
 	mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL);
-	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
 	complete(&mb5_transfer.work);
 	return false;
 }
 
 static bool read_mailbox_6(void)
 {
-	writel(MBOX_BIT(6), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
 static bool read_mailbox_7(void)
 {
-	writel(MBOX_BIT(7), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
@@ -1696,7 +1691,7 @@
 	u8 n;
 	irqreturn_t r;
 
-	bits = (readl(_PRCMU_BASE + PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
+	bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
 	if (unlikely(!bits))
 		return IRQ_NONE;
 
@@ -2025,7 +2020,7 @@
 		return -ENODEV;
 
 	/* Clean up the mailbox interrupts after pre-kernel code. */
-	writel(ALL_MBOX_BITS, (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
 
 	err = request_threaded_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler,
 		prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);