drivers/rtc/rtc-m41t80.c: clean up error paths
There is no cleanup needed when something fails in probe, so no need for
goto. Directly return when something fails.
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index c287c6d..86eccb1 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -627,37 +627,28 @@
struct m41t80_data *clientdata = NULL;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C
- | I2C_FUNC_SMBUS_BYTE_DATA)) {
- rc = -ENODEV;
- goto exit;
- }
+ | I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
clientdata = devm_kzalloc(&client->dev, sizeof(*clientdata),
GFP_KERNEL);
- if (!clientdata) {
- rc = -ENOMEM;
- goto exit;
- }
+ if (!clientdata)
+ return -ENOMEM;
clientdata->features = id->driver_data;
i2c_set_clientdata(client, clientdata);
rtc = devm_rtc_device_register(&client->dev, client->name,
&m41t80_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc)) {
- rc = PTR_ERR(rtc);
- rtc = NULL;
- goto exit;
- }
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
clientdata->rtc = rtc;
/* Make sure HT (Halt Update) bit is cleared */
rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR);
- if (rc < 0)
- goto ht_err;
- if (rc & M41T80_ALHOUR_HT) {
+ if (rc >= 0 && rc & M41T80_ALHOUR_HT) {
if (clientdata->features & M41T80_FEATURE_HT) {
m41t80_get_datetime(client, &tm);
dev_info(&client->dev, "HT bit was set!\n");
@@ -668,53 +659,44 @@
tm.tm_mon + 1, tm.tm_mday, tm.tm_hour,
tm.tm_min, tm.tm_sec);
}
- if (i2c_smbus_write_byte_data(client,
- M41T80_REG_ALARM_HOUR,
- rc & ~M41T80_ALHOUR_HT) < 0)
- goto ht_err;
+ rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_HOUR,
+ rc & ~M41T80_ALHOUR_HT);
+ }
+
+ if (rc < 0) {
+ dev_err(&client->dev, "Can't clear HT bit\n");
+ return -EIO;
}
/* Make sure ST (stop) bit is cleared */
rc = i2c_smbus_read_byte_data(client, M41T80_REG_SEC);
- if (rc < 0)
- goto st_err;
- if (rc & M41T80_SEC_ST) {
- if (i2c_smbus_write_byte_data(client, M41T80_REG_SEC,
- rc & ~M41T80_SEC_ST) < 0)
- goto st_err;
+ if (rc >= 0 && rc & M41T80_SEC_ST)
+ rc = i2c_smbus_write_byte_data(client, M41T80_REG_SEC,
+ rc & ~M41T80_SEC_ST);
+ if (rc < 0) {
+ dev_err(&client->dev, "Can't clear ST bit\n");
+ return -EIO;
}
rc = m41t80_sysfs_register(&client->dev);
if (rc)
- goto exit;
+ return rc;
#ifdef CONFIG_RTC_DRV_M41T80_WDT
if (clientdata->features & M41T80_FEATURE_HT) {
save_client = client;
rc = misc_register(&wdt_dev);
if (rc)
- goto exit;
+ return rc;
rc = register_reboot_notifier(&wdt_notifier);
if (rc) {
misc_deregister(&wdt_dev);
- goto exit;
+ return rc;
}
}
#endif
return 0;
-
-st_err:
- rc = -EIO;
- dev_err(&client->dev, "Can't clear ST bit\n");
- goto exit;
-ht_err:
- rc = -EIO;
- dev_err(&client->dev, "Can't clear HT bit\n");
- goto exit;
-
-exit:
- return rc;
}
static int m41t80_remove(struct i2c_client *client)
