| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2005-2006 Micronas USA Inc. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/videodev2.h> |
| #include <media/tuner.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/v4l2-device.h> |
| #include <linux/slab.h> |
| |
| MODULE_DESCRIPTION("sony-btf-mpx driver"); |
| MODULE_LICENSE("GPL v2"); |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "debug level 0=off(default) 1=on"); |
| |
| /* #define MPX_DEBUG */ |
| |
| /* |
| * Note: |
| * |
| * AS(IF/MPX) pin: LOW HIGH/OPEN |
| * IF/MPX address: 0x42/0x40 0x43/0x44 |
| */ |
| |
| |
| static int force_mpx_mode = -1; |
| module_param(force_mpx_mode, int, 0644); |
| |
| struct sony_btf_mpx { |
| struct v4l2_subdev sd; |
| int mpxmode; |
| u32 audmode; |
| }; |
| |
| static inline struct sony_btf_mpx *to_state(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct sony_btf_mpx, sd); |
| } |
| |
| static int mpx_write(struct i2c_client *client, int dev, int addr, int val) |
| { |
| u8 buffer[5]; |
| struct i2c_msg msg; |
| |
| buffer[0] = dev; |
| buffer[1] = addr >> 8; |
| buffer[2] = addr & 0xff; |
| buffer[3] = val >> 8; |
| buffer[4] = val & 0xff; |
| msg.addr = client->addr; |
| msg.flags = 0; |
| msg.len = 5; |
| msg.buf = buffer; |
| i2c_transfer(client->adapter, &msg, 1); |
| return 0; |
| } |
| |
| /* |
| * MPX register values for the BTF-PG472Z: |
| * |
| * FM_ NICAM_ SCART_ |
| * MODUS SOURCE ACB PRESCAL PRESCAL PRESCAL SYSTEM VOLUME |
| * 10/0030 12/0008 12/0013 12/000E 12/0010 12/0000 10/0020 12/0000 |
| * --------------------------------------------------------------- |
| * Auto 1003 0020 0100 2603 5000 XXXX 0001 7500 |
| * |
| * B/G |
| * Mono 1003 0020 0100 2603 5000 XXXX 0003 7500 |
| * A2 1003 0020 0100 2601 5000 XXXX 0003 7500 |
| * NICAM 1003 0120 0100 2603 5000 XXXX 0008 7500 |
| * |
| * I |
| * Mono 1003 0020 0100 2603 7900 XXXX 000A 7500 |
| * NICAM 1003 0120 0100 2603 7900 XXXX 000A 7500 |
| * |
| * D/K |
| * Mono 1003 0020 0100 2603 5000 XXXX 0004 7500 |
| * A2-1 1003 0020 0100 2601 5000 XXXX 0004 7500 |
| * A2-2 1003 0020 0100 2601 5000 XXXX 0005 7500 |
| * A2-3 1003 0020 0100 2601 5000 XXXX 0007 7500 |
| * NICAM 1003 0120 0100 2603 5000 XXXX 000B 7500 |
| * |
| * L/L' |
| * Mono 0003 0200 0100 7C03 5000 2200 0009 7500 |
| * NICAM 0003 0120 0100 7C03 5000 XXXX 0009 7500 |
| * |
| * M |
| * Mono 1003 0200 0100 2B03 5000 2B00 0002 7500 |
| * |
| * For Asia, replace the 0x26XX in FM_PRESCALE with 0x14XX. |
| * |
| * Bilingual selection in A2/NICAM: |
| * |
| * High byte of SOURCE Left chan Right chan |
| * 0x01 MAIN SUB |
| * 0x03 MAIN MAIN |
| * 0x04 SUB SUB |
| * |
| * Force mono in NICAM by setting the high byte of SOURCE to 0x02 (L/L') or |
| * 0x00 (all other bands). Force mono in A2 with FMONO_A2: |
| * |
| * FMONO_A2 |
| * 10/0022 |
| * -------- |
| * Forced mono ON 07F0 |
| * Forced mono OFF 0190 |
| */ |
| |
| static const struct { |
| enum { AUD_MONO, AUD_A2, AUD_NICAM, AUD_NICAM_L } audio_mode; |
| u16 modus; |
| u16 source; |
| u16 acb; |
| u16 fm_prescale; |
| u16 nicam_prescale; |
| u16 scart_prescale; |
| u16 system; |
| u16 volume; |
| } mpx_audio_modes[] = { |
| /* Auto */ { AUD_MONO, 0x1003, 0x0020, 0x0100, 0x2603, |
| 0x5000, 0x0000, 0x0001, 0x7500 }, |
| /* B/G Mono */ { AUD_MONO, 0x1003, 0x0020, 0x0100, 0x2603, |
| 0x5000, 0x0000, 0x0003, 0x7500 }, |
| /* B/G A2 */ { AUD_A2, 0x1003, 0x0020, 0x0100, 0x2601, |
| 0x5000, 0x0000, 0x0003, 0x7500 }, |
| /* B/G NICAM */ { AUD_NICAM, 0x1003, 0x0120, 0x0100, 0x2603, |
| 0x5000, 0x0000, 0x0008, 0x7500 }, |
| /* I Mono */ { AUD_MONO, 0x1003, 0x0020, 0x0100, 0x2603, |
| 0x7900, 0x0000, 0x000A, 0x7500 }, |
| /* I NICAM */ { AUD_NICAM, 0x1003, 0x0120, 0x0100, 0x2603, |
| 0x7900, 0x0000, 0x000A, 0x7500 }, |
| /* D/K Mono */ { AUD_MONO, 0x1003, 0x0020, 0x0100, 0x2603, |
| 0x5000, 0x0000, 0x0004, 0x7500 }, |
| /* D/K A2-1 */ { AUD_A2, 0x1003, 0x0020, 0x0100, 0x2601, |
| 0x5000, 0x0000, 0x0004, 0x7500 }, |
| /* D/K A2-2 */ { AUD_A2, 0x1003, 0x0020, 0x0100, 0x2601, |
| 0x5000, 0x0000, 0x0005, 0x7500 }, |
| /* D/K A2-3 */ { AUD_A2, 0x1003, 0x0020, 0x0100, 0x2601, |
| 0x5000, 0x0000, 0x0007, 0x7500 }, |
| /* D/K NICAM */ { AUD_NICAM, 0x1003, 0x0120, 0x0100, 0x2603, |
| 0x5000, 0x0000, 0x000B, 0x7500 }, |
| /* L/L' Mono */ { AUD_MONO, 0x0003, 0x0200, 0x0100, 0x7C03, |
| 0x5000, 0x2200, 0x0009, 0x7500 }, |
| /* L/L' NICAM */{ AUD_NICAM_L, 0x0003, 0x0120, 0x0100, 0x7C03, |
| 0x5000, 0x0000, 0x0009, 0x7500 }, |
| }; |
| |
| #define MPX_NUM_MODES ARRAY_SIZE(mpx_audio_modes) |
| |
| static int mpx_setup(struct sony_btf_mpx *t) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&t->sd); |
| u16 source = 0; |
| u8 buffer[3]; |
| struct i2c_msg msg; |
| int mode = t->mpxmode; |
| |
| /* reset MPX */ |
| buffer[0] = 0x00; |
| buffer[1] = 0x80; |
| buffer[2] = 0x00; |
| msg.addr = client->addr; |
| msg.flags = 0; |
| msg.len = 3; |
| msg.buf = buffer; |
| i2c_transfer(client->adapter, &msg, 1); |
| buffer[1] = 0x00; |
| i2c_transfer(client->adapter, &msg, 1); |
| |
| if (t->audmode != V4L2_TUNER_MODE_MONO) |
| mode++; |
| |
| if (mpx_audio_modes[mode].audio_mode != AUD_MONO) { |
| switch (t->audmode) { |
| case V4L2_TUNER_MODE_MONO: |
| switch (mpx_audio_modes[mode].audio_mode) { |
| case AUD_A2: |
| source = mpx_audio_modes[mode].source; |
| break; |
| case AUD_NICAM: |
| source = 0x0000; |
| break; |
| case AUD_NICAM_L: |
| source = 0x0200; |
| break; |
| default: |
| break; |
| } |
| break; |
| case V4L2_TUNER_MODE_STEREO: |
| source = mpx_audio_modes[mode].source; |
| break; |
| case V4L2_TUNER_MODE_LANG1: |
| source = 0x0300; |
| break; |
| case V4L2_TUNER_MODE_LANG2: |
| source = 0x0400; |
| break; |
| } |
| source |= mpx_audio_modes[mode].source & 0x00ff; |
| } else |
| source = mpx_audio_modes[mode].source; |
| |
| mpx_write(client, 0x10, 0x0030, mpx_audio_modes[mode].modus); |
| mpx_write(client, 0x12, 0x0008, source); |
| mpx_write(client, 0x12, 0x0013, mpx_audio_modes[mode].acb); |
| mpx_write(client, 0x12, 0x000e, |
| mpx_audio_modes[mode].fm_prescale); |
| mpx_write(client, 0x12, 0x0010, |
| mpx_audio_modes[mode].nicam_prescale); |
| mpx_write(client, 0x12, 0x000d, |
| mpx_audio_modes[mode].scart_prescale); |
| mpx_write(client, 0x10, 0x0020, mpx_audio_modes[mode].system); |
| mpx_write(client, 0x12, 0x0000, mpx_audio_modes[mode].volume); |
| if (mpx_audio_modes[mode].audio_mode == AUD_A2) |
| mpx_write(client, 0x10, 0x0022, |
| t->audmode == V4L2_TUNER_MODE_MONO ? 0x07f0 : 0x0190); |
| |
| #ifdef MPX_DEBUG |
| { |
| u8 buf1[3], buf2[2]; |
| struct i2c_msg msgs[2]; |
| |
| v4l2_info(client, |
| "MPX registers: %04x %04x %04x %04x %04x %04x %04x %04x\n", |
| mpx_audio_modes[mode].modus, |
| source, |
| mpx_audio_modes[mode].acb, |
| mpx_audio_modes[mode].fm_prescale, |
| mpx_audio_modes[mode].nicam_prescale, |
| mpx_audio_modes[mode].scart_prescale, |
| mpx_audio_modes[mode].system, |
| mpx_audio_modes[mode].volume); |
| buf1[0] = 0x11; |
| buf1[1] = 0x00; |
| buf1[2] = 0x7e; |
| msgs[0].addr = client->addr; |
| msgs[0].flags = 0; |
| msgs[0].len = 3; |
| msgs[0].buf = buf1; |
| msgs[1].addr = client->addr; |
| msgs[1].flags = I2C_M_RD; |
| msgs[1].len = 2; |
| msgs[1].buf = buf2; |
| i2c_transfer(client->adapter, msgs, 2); |
| v4l2_info(client, "MPX system: %02x%02x\n", |
| buf2[0], buf2[1]); |
| buf1[0] = 0x11; |
| buf1[1] = 0x02; |
| buf1[2] = 0x00; |
| i2c_transfer(client->adapter, msgs, 2); |
| v4l2_info(client, "MPX status: %02x%02x\n", |
| buf2[0], buf2[1]); |
| } |
| #endif |
| return 0; |
| } |
| |
| |
| static int sony_btf_mpx_s_std(struct v4l2_subdev *sd, v4l2_std_id std) |
| { |
| struct sony_btf_mpx *t = to_state(sd); |
| int default_mpx_mode = 0; |
| |
| if (std & V4L2_STD_PAL_BG) |
| default_mpx_mode = 1; |
| else if (std & V4L2_STD_PAL_I) |
| default_mpx_mode = 4; |
| else if (std & V4L2_STD_PAL_DK) |
| default_mpx_mode = 6; |
| else if (std & V4L2_STD_SECAM_L) |
| default_mpx_mode = 11; |
| |
| if (default_mpx_mode != t->mpxmode) { |
| t->mpxmode = default_mpx_mode; |
| mpx_setup(t); |
| } |
| return 0; |
| } |
| |
| static int sony_btf_mpx_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) |
| { |
| struct sony_btf_mpx *t = to_state(sd); |
| |
| vt->capability = V4L2_TUNER_CAP_NORM | |
| V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | |
| V4L2_TUNER_CAP_LANG2; |
| vt->rxsubchans = V4L2_TUNER_SUB_MONO | |
| V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | |
| V4L2_TUNER_SUB_LANG2; |
| vt->audmode = t->audmode; |
| return 0; |
| } |
| |
| static int sony_btf_mpx_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) |
| { |
| struct sony_btf_mpx *t = to_state(sd); |
| |
| if (vt->type != V4L2_TUNER_ANALOG_TV) |
| return -EINVAL; |
| |
| if (vt->audmode != t->audmode) { |
| t->audmode = vt->audmode; |
| mpx_setup(t); |
| } |
| return 0; |
| } |
| |
| /* --------------------------------------------------------------------------*/ |
| |
| static const struct v4l2_subdev_tuner_ops sony_btf_mpx_tuner_ops = { |
| .s_tuner = sony_btf_mpx_s_tuner, |
| .g_tuner = sony_btf_mpx_g_tuner, |
| }; |
| |
| static const struct v4l2_subdev_video_ops sony_btf_mpx_video_ops = { |
| .s_std = sony_btf_mpx_s_std, |
| }; |
| |
| static const struct v4l2_subdev_ops sony_btf_mpx_ops = { |
| .tuner = &sony_btf_mpx_tuner_ops, |
| .video = &sony_btf_mpx_video_ops, |
| }; |
| |
| /* --------------------------------------------------------------------------*/ |
| |
| static int sony_btf_mpx_probe(struct i2c_client *client) |
| { |
| struct sony_btf_mpx *t; |
| struct v4l2_subdev *sd; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) |
| return -ENODEV; |
| |
| v4l_info(client, "chip found @ 0x%x (%s)\n", |
| client->addr << 1, client->adapter->name); |
| |
| t = devm_kzalloc(&client->dev, sizeof(*t), GFP_KERNEL); |
| if (t == NULL) |
| return -ENOMEM; |
| |
| sd = &t->sd; |
| v4l2_i2c_subdev_init(sd, client, &sony_btf_mpx_ops); |
| |
| /* Initialize sony_btf_mpx */ |
| t->mpxmode = 0; |
| t->audmode = V4L2_TUNER_MODE_STEREO; |
| |
| return 0; |
| } |
| |
| static void sony_btf_mpx_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| |
| v4l2_device_unregister_subdev(sd); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static const struct i2c_device_id sony_btf_mpx_id[] = { |
| { "sony-btf-mpx" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, sony_btf_mpx_id); |
| |
| static struct i2c_driver sony_btf_mpx_driver = { |
| .driver = { |
| .name = "sony-btf-mpx", |
| }, |
| .probe = sony_btf_mpx_probe, |
| .remove = sony_btf_mpx_remove, |
| .id_table = sony_btf_mpx_id, |
| }; |
| module_i2c_driver(sony_btf_mpx_driver); |