| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * DDR Self-Refresh Power Down (SRPD) support for Broadcom STB SoCs |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| |
| #define REG_MEMC_CNTRLR_CONFIG 0x00 |
| #define CNTRLR_CONFIG_LPDDR4_SHIFT 5 |
| #define CNTRLR_CONFIG_MASK 0xf |
| #define REG_MEMC_SRPD_CFG_21 0x20 |
| #define REG_MEMC_SRPD_CFG_20 0x34 |
| #define REG_MEMC_SRPD_CFG_1x 0x3c |
| #define INACT_COUNT_SHIFT 0 |
| #define INACT_COUNT_MASK 0xffff |
| #define SRPD_EN_SHIFT 16 |
| |
| struct brcmstb_memc_data { |
| u32 srpd_offset; |
| }; |
| |
| struct brcmstb_memc { |
| struct device *dev; |
| void __iomem *ddr_ctrl; |
| unsigned int timeout_cycles; |
| u32 frequency; |
| u32 srpd_offset; |
| }; |
| |
| static int brcmstb_memc_uses_lpddr4(struct brcmstb_memc *memc) |
| { |
| void __iomem *config = memc->ddr_ctrl + REG_MEMC_CNTRLR_CONFIG; |
| u32 reg; |
| |
| reg = readl_relaxed(config) & CNTRLR_CONFIG_MASK; |
| |
| return reg == CNTRLR_CONFIG_LPDDR4_SHIFT; |
| } |
| |
| static int brcmstb_memc_srpd_config(struct brcmstb_memc *memc, |
| unsigned int cycles) |
| { |
| void __iomem *cfg = memc->ddr_ctrl + memc->srpd_offset; |
| u32 val; |
| |
| /* Max timeout supported in HW */ |
| if (cycles > INACT_COUNT_MASK) |
| return -EINVAL; |
| |
| memc->timeout_cycles = cycles; |
| |
| val = (cycles << INACT_COUNT_SHIFT) & INACT_COUNT_MASK; |
| if (cycles) |
| val |= BIT(SRPD_EN_SHIFT); |
| |
| writel_relaxed(val, cfg); |
| /* Ensure the write is committed to the controller */ |
| (void)readl_relaxed(cfg); |
| |
| return 0; |
| } |
| |
| static ssize_t frequency_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct brcmstb_memc *memc = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", memc->frequency); |
| } |
| |
| static ssize_t srpd_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct brcmstb_memc *memc = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", memc->timeout_cycles); |
| } |
| |
| static ssize_t srpd_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct brcmstb_memc *memc = dev_get_drvdata(dev); |
| unsigned int val; |
| int ret; |
| |
| /* |
| * Cannot change the inactivity timeout on LPDDR4 chips because the |
| * dynamic tuning process will also get affected by the inactivity |
| * timeout, thus making it non functional. |
| */ |
| if (brcmstb_memc_uses_lpddr4(memc)) |
| return -EOPNOTSUPP; |
| |
| ret = kstrtouint(buf, 10, &val); |
| if (ret < 0) |
| return ret; |
| |
| ret = brcmstb_memc_srpd_config(memc, val); |
| if (ret) |
| return ret; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RO(frequency); |
| static DEVICE_ATTR_RW(srpd); |
| |
| static struct attribute *dev_attrs[] = { |
| &dev_attr_frequency.attr, |
| &dev_attr_srpd.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group dev_attr_group = { |
| .attrs = dev_attrs, |
| }; |
| |
| static int brcmstb_memc_probe(struct platform_device *pdev) |
| { |
| const struct brcmstb_memc_data *memc_data; |
| struct device *dev = &pdev->dev; |
| struct brcmstb_memc *memc; |
| int ret; |
| |
| memc = devm_kzalloc(dev, sizeof(*memc), GFP_KERNEL); |
| if (!memc) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, memc); |
| |
| memc_data = device_get_match_data(dev); |
| memc->srpd_offset = memc_data->srpd_offset; |
| |
| memc->ddr_ctrl = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(memc->ddr_ctrl)) |
| return PTR_ERR(memc->ddr_ctrl); |
| |
| of_property_read_u32(pdev->dev.of_node, "clock-frequency", |
| &memc->frequency); |
| |
| ret = sysfs_create_group(&dev->kobj, &dev_attr_group); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void brcmstb_memc_remove(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| |
| sysfs_remove_group(&dev->kobj, &dev_attr_group); |
| } |
| |
| enum brcmstb_memc_hwtype { |
| BRCMSTB_MEMC_V21, |
| BRCMSTB_MEMC_V20, |
| BRCMSTB_MEMC_V1X, |
| }; |
| |
| static const struct brcmstb_memc_data brcmstb_memc_versions[] = { |
| { .srpd_offset = REG_MEMC_SRPD_CFG_21 }, |
| { .srpd_offset = REG_MEMC_SRPD_CFG_20 }, |
| { .srpd_offset = REG_MEMC_SRPD_CFG_1x }, |
| }; |
| |
| static const struct of_device_id brcmstb_memc_of_match[] = { |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V1X] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.0", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V20] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.1", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.2", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.3", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.5", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.6", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.7", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.8", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-b.3.0", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-b.3.1", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-c.1.0", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-c.1.1", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-c.1.2", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-c.1.3", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| { |
| .compatible = "brcm,brcmstb-memc-ddr-rev-c.1.4", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21] |
| }, |
| /* default to the original offset */ |
| { |
| .compatible = "brcm,brcmstb-memc-ddr", |
| .data = &brcmstb_memc_versions[BRCMSTB_MEMC_V1X] |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, brcmstb_memc_of_match); |
| |
| static int brcmstb_memc_suspend(struct device *dev) |
| { |
| struct brcmstb_memc *memc = dev_get_drvdata(dev); |
| void __iomem *cfg = memc->ddr_ctrl + memc->srpd_offset; |
| u32 val; |
| |
| if (memc->timeout_cycles == 0) |
| return 0; |
| |
| /* |
| * Disable SRPD prior to suspending the system since that can |
| * cause issues with other memory clients managed by the ARM |
| * trusted firmware to access memory. |
| */ |
| val = readl_relaxed(cfg); |
| val &= ~BIT(SRPD_EN_SHIFT); |
| writel_relaxed(val, cfg); |
| /* Ensure the write is committed to the controller */ |
| (void)readl_relaxed(cfg); |
| |
| return 0; |
| } |
| |
| static int brcmstb_memc_resume(struct device *dev) |
| { |
| struct brcmstb_memc *memc = dev_get_drvdata(dev); |
| |
| if (memc->timeout_cycles == 0) |
| return 0; |
| |
| return brcmstb_memc_srpd_config(memc, memc->timeout_cycles); |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(brcmstb_memc_pm_ops, brcmstb_memc_suspend, |
| brcmstb_memc_resume); |
| |
| static struct platform_driver brcmstb_memc_driver = { |
| .probe = brcmstb_memc_probe, |
| .remove_new = brcmstb_memc_remove, |
| .driver = { |
| .name = "brcmstb_memc", |
| .of_match_table = brcmstb_memc_of_match, |
| .pm = pm_ptr(&brcmstb_memc_pm_ops), |
| }, |
| }; |
| module_platform_driver(brcmstb_memc_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Broadcom"); |
| MODULE_DESCRIPTION("DDR SRPD driver for Broadcom STB chips"); |