| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * lms501kf03 TFT LCD panel driver. |
| * |
| * Copyright (c) 2012 Samsung Electronics Co., Ltd. |
| * Author: Jingoo Han <jg1.han@samsung.com> |
| */ |
| |
| #include <linux/backlight.h> |
| #include <linux/delay.h> |
| #include <linux/fb.h> |
| #include <linux/lcd.h> |
| #include <linux/module.h> |
| #include <linux/spi/spi.h> |
| #include <linux/wait.h> |
| |
| #define COMMAND_ONLY 0x00 |
| #define DATA_ONLY 0x01 |
| |
| struct lms501kf03 { |
| struct device *dev; |
| struct spi_device *spi; |
| unsigned int power; |
| struct lcd_device *ld; |
| struct lcd_platform_data *lcd_pd; |
| }; |
| |
| static const unsigned char seq_password[] = { |
| 0xb9, 0xff, 0x83, 0x69, |
| }; |
| |
| static const unsigned char seq_power[] = { |
| 0xb1, 0x01, 0x00, 0x34, 0x06, 0x00, 0x14, 0x14, 0x20, 0x28, |
| 0x12, 0x12, 0x17, 0x0a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, |
| }; |
| |
| static const unsigned char seq_display[] = { |
| 0xb2, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00, 0xff, 0x00, 0x00, |
| 0x00, 0x00, 0x03, 0x03, 0x00, 0x01, |
| }; |
| |
| static const unsigned char seq_rgb_if[] = { |
| 0xb3, 0x09, |
| }; |
| |
| static const unsigned char seq_display_inv[] = { |
| 0xb4, 0x01, 0x08, 0x77, 0x0e, 0x06, |
| }; |
| |
| static const unsigned char seq_vcom[] = { |
| 0xb6, 0x4c, 0x2e, |
| }; |
| |
| static const unsigned char seq_gate[] = { |
| 0xd5, 0x00, 0x05, 0x03, 0x29, 0x01, 0x07, 0x17, 0x68, 0x13, |
| 0x37, 0x20, 0x31, 0x8a, 0x46, 0x9b, 0x57, 0x13, 0x02, 0x75, |
| 0xb9, 0x64, 0xa8, 0x07, 0x0f, 0x04, 0x07, |
| }; |
| |
| static const unsigned char seq_panel[] = { |
| 0xcc, 0x02, |
| }; |
| |
| static const unsigned char seq_col_mod[] = { |
| 0x3a, 0x77, |
| }; |
| |
| static const unsigned char seq_w_gamma[] = { |
| 0xe0, 0x00, 0x04, 0x09, 0x0f, 0x1f, 0x3f, 0x1f, 0x2f, 0x0a, |
| 0x0f, 0x10, 0x16, 0x18, 0x16, 0x17, 0x0d, 0x15, 0x00, 0x04, |
| 0x09, 0x0f, 0x38, 0x3f, 0x20, 0x39, 0x0a, 0x0f, 0x10, 0x16, |
| 0x18, 0x16, 0x17, 0x0d, 0x15, |
| }; |
| |
| static const unsigned char seq_rgb_gamma[] = { |
| 0xc1, 0x01, 0x03, 0x07, 0x0f, 0x1a, 0x22, 0x2c, 0x33, 0x3c, |
| 0x46, 0x4f, 0x58, 0x60, 0x69, 0x71, 0x79, 0x82, 0x89, 0x92, |
| 0x9a, 0xa1, 0xa9, 0xb1, 0xb9, 0xc1, 0xc9, 0xcf, 0xd6, 0xde, |
| 0xe5, 0xec, 0xf3, 0xf9, 0xff, 0xdd, 0x39, 0x07, 0x1c, 0xcb, |
| 0xab, 0x5f, 0x49, 0x80, 0x03, 0x07, 0x0f, 0x19, 0x20, 0x2a, |
| 0x31, 0x39, 0x42, 0x4b, 0x53, 0x5b, 0x63, 0x6b, 0x73, 0x7b, |
| 0x83, 0x8a, 0x92, 0x9b, 0xa2, 0xaa, 0xb2, 0xba, 0xc2, 0xca, |
| 0xd0, 0xd8, 0xe1, 0xe8, 0xf0, 0xf8, 0xff, 0xf7, 0xd8, 0xbe, |
| 0xa7, 0x39, 0x40, 0x85, 0x8c, 0xc0, 0x04, 0x07, 0x0c, 0x17, |
| 0x1c, 0x23, 0x2b, 0x34, 0x3b, 0x43, 0x4c, 0x54, 0x5b, 0x63, |
| 0x6a, 0x73, 0x7a, 0x82, 0x8a, 0x91, 0x98, 0xa1, 0xa8, 0xb0, |
| 0xb7, 0xc1, 0xc9, 0xcf, 0xd9, 0xe3, 0xea, 0xf4, 0xff, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| }; |
| |
| static const unsigned char seq_sleep_out[] = { |
| 0x11, |
| }; |
| |
| static const unsigned char seq_display_on[] = { |
| 0x29, |
| }; |
| |
| static const unsigned char seq_display_off[] = { |
| 0x10, |
| }; |
| |
| static int lms501kf03_spi_write_byte(struct lms501kf03 *lcd, int addr, int data) |
| { |
| u16 buf[1]; |
| struct spi_message msg; |
| |
| struct spi_transfer xfer = { |
| .len = 2, |
| .tx_buf = buf, |
| }; |
| |
| buf[0] = (addr << 8) | data; |
| |
| spi_message_init(&msg); |
| spi_message_add_tail(&xfer, &msg); |
| |
| return spi_sync(lcd->spi, &msg); |
| } |
| |
| static int lms501kf03_spi_write(struct lms501kf03 *lcd, unsigned char address, |
| unsigned char command) |
| { |
| return lms501kf03_spi_write_byte(lcd, address, command); |
| } |
| |
| static int lms501kf03_panel_send_sequence(struct lms501kf03 *lcd, |
| const unsigned char *wbuf, |
| unsigned int len) |
| { |
| int ret = 0, i = 0; |
| |
| while (i < len) { |
| if (i == 0) |
| ret = lms501kf03_spi_write(lcd, COMMAND_ONLY, wbuf[i]); |
| else |
| ret = lms501kf03_spi_write(lcd, DATA_ONLY, wbuf[i]); |
| if (ret) |
| break; |
| i += 1; |
| } |
| |
| return ret; |
| } |
| |
| static int lms501kf03_ldi_init(struct lms501kf03 *lcd) |
| { |
| int ret, i; |
| static const unsigned char *init_seq[] = { |
| seq_password, |
| seq_power, |
| seq_display, |
| seq_rgb_if, |
| seq_display_inv, |
| seq_vcom, |
| seq_gate, |
| seq_panel, |
| seq_col_mod, |
| seq_w_gamma, |
| seq_rgb_gamma, |
| seq_sleep_out, |
| }; |
| |
| static const unsigned int size_seq[] = { |
| ARRAY_SIZE(seq_password), |
| ARRAY_SIZE(seq_power), |
| ARRAY_SIZE(seq_display), |
| ARRAY_SIZE(seq_rgb_if), |
| ARRAY_SIZE(seq_display_inv), |
| ARRAY_SIZE(seq_vcom), |
| ARRAY_SIZE(seq_gate), |
| ARRAY_SIZE(seq_panel), |
| ARRAY_SIZE(seq_col_mod), |
| ARRAY_SIZE(seq_w_gamma), |
| ARRAY_SIZE(seq_rgb_gamma), |
| ARRAY_SIZE(seq_sleep_out), |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(init_seq); i++) { |
| ret = lms501kf03_panel_send_sequence(lcd, init_seq[i], |
| size_seq[i]); |
| if (ret) |
| break; |
| } |
| /* |
| * According to the datasheet, 120ms delay time is required. |
| * After sleep out sequence, command is blocked for 120ms. |
| * Thus, LDI should wait for 120ms. |
| */ |
| msleep(120); |
| |
| return ret; |
| } |
| |
| static int lms501kf03_ldi_enable(struct lms501kf03 *lcd) |
| { |
| return lms501kf03_panel_send_sequence(lcd, seq_display_on, |
| ARRAY_SIZE(seq_display_on)); |
| } |
| |
| static int lms501kf03_ldi_disable(struct lms501kf03 *lcd) |
| { |
| return lms501kf03_panel_send_sequence(lcd, seq_display_off, |
| ARRAY_SIZE(seq_display_off)); |
| } |
| |
| static int lms501kf03_power_is_on(int power) |
| { |
| return (power) <= FB_BLANK_NORMAL; |
| } |
| |
| static int lms501kf03_power_on(struct lms501kf03 *lcd) |
| { |
| int ret = 0; |
| struct lcd_platform_data *pd; |
| |
| pd = lcd->lcd_pd; |
| |
| if (!pd->power_on) { |
| dev_err(lcd->dev, "power_on is NULL.\n"); |
| return -EINVAL; |
| } |
| |
| pd->power_on(lcd->ld, 1); |
| msleep(pd->power_on_delay); |
| |
| if (!pd->reset) { |
| dev_err(lcd->dev, "reset is NULL.\n"); |
| return -EINVAL; |
| } |
| |
| pd->reset(lcd->ld); |
| msleep(pd->reset_delay); |
| |
| ret = lms501kf03_ldi_init(lcd); |
| if (ret) { |
| dev_err(lcd->dev, "failed to initialize ldi.\n"); |
| return ret; |
| } |
| |
| ret = lms501kf03_ldi_enable(lcd); |
| if (ret) { |
| dev_err(lcd->dev, "failed to enable ldi.\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int lms501kf03_power_off(struct lms501kf03 *lcd) |
| { |
| int ret = 0; |
| struct lcd_platform_data *pd; |
| |
| pd = lcd->lcd_pd; |
| |
| ret = lms501kf03_ldi_disable(lcd); |
| if (ret) { |
| dev_err(lcd->dev, "lcd setting failed.\n"); |
| return -EIO; |
| } |
| |
| msleep(pd->power_off_delay); |
| |
| pd->power_on(lcd->ld, 0); |
| |
| return 0; |
| } |
| |
| static int lms501kf03_power(struct lms501kf03 *lcd, int power) |
| { |
| int ret = 0; |
| |
| if (lms501kf03_power_is_on(power) && |
| !lms501kf03_power_is_on(lcd->power)) |
| ret = lms501kf03_power_on(lcd); |
| else if (!lms501kf03_power_is_on(power) && |
| lms501kf03_power_is_on(lcd->power)) |
| ret = lms501kf03_power_off(lcd); |
| |
| if (!ret) |
| lcd->power = power; |
| |
| return ret; |
| } |
| |
| static int lms501kf03_get_power(struct lcd_device *ld) |
| { |
| struct lms501kf03 *lcd = lcd_get_data(ld); |
| |
| return lcd->power; |
| } |
| |
| static int lms501kf03_set_power(struct lcd_device *ld, int power) |
| { |
| struct lms501kf03 *lcd = lcd_get_data(ld); |
| |
| if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN && |
| power != FB_BLANK_NORMAL) { |
| dev_err(lcd->dev, "power value should be 0, 1 or 4.\n"); |
| return -EINVAL; |
| } |
| |
| return lms501kf03_power(lcd, power); |
| } |
| |
| static const struct lcd_ops lms501kf03_lcd_ops = { |
| .get_power = lms501kf03_get_power, |
| .set_power = lms501kf03_set_power, |
| }; |
| |
| static int lms501kf03_probe(struct spi_device *spi) |
| { |
| struct lms501kf03 *lcd = NULL; |
| struct lcd_device *ld = NULL; |
| int ret = 0; |
| |
| lcd = devm_kzalloc(&spi->dev, sizeof(struct lms501kf03), GFP_KERNEL); |
| if (!lcd) |
| return -ENOMEM; |
| |
| /* lms501kf03 lcd panel uses 3-wire 9-bit SPI Mode. */ |
| spi->bits_per_word = 9; |
| |
| ret = spi_setup(spi); |
| if (ret < 0) { |
| dev_err(&spi->dev, "spi setup failed.\n"); |
| return ret; |
| } |
| |
| lcd->spi = spi; |
| lcd->dev = &spi->dev; |
| |
| lcd->lcd_pd = dev_get_platdata(&spi->dev); |
| if (!lcd->lcd_pd) { |
| dev_err(&spi->dev, "platform data is NULL\n"); |
| return -EINVAL; |
| } |
| |
| ld = devm_lcd_device_register(&spi->dev, "lms501kf03", &spi->dev, lcd, |
| &lms501kf03_lcd_ops); |
| if (IS_ERR(ld)) |
| return PTR_ERR(ld); |
| |
| lcd->ld = ld; |
| |
| if (!lcd->lcd_pd->lcd_enabled) { |
| /* |
| * if lcd panel was off from bootloader then |
| * current lcd status is powerdown and then |
| * it enables lcd panel. |
| */ |
| lcd->power = FB_BLANK_POWERDOWN; |
| |
| lms501kf03_power(lcd, FB_BLANK_UNBLANK); |
| } else { |
| lcd->power = FB_BLANK_UNBLANK; |
| } |
| |
| spi_set_drvdata(spi, lcd); |
| |
| dev_info(&spi->dev, "lms501kf03 panel driver has been probed.\n"); |
| |
| return 0; |
| } |
| |
| static void lms501kf03_remove(struct spi_device *spi) |
| { |
| struct lms501kf03 *lcd = spi_get_drvdata(spi); |
| |
| lms501kf03_power(lcd, FB_BLANK_POWERDOWN); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int lms501kf03_suspend(struct device *dev) |
| { |
| struct lms501kf03 *lcd = dev_get_drvdata(dev); |
| |
| dev_dbg(dev, "lcd->power = %d\n", lcd->power); |
| |
| /* |
| * when lcd panel is suspend, lcd panel becomes off |
| * regardless of status. |
| */ |
| return lms501kf03_power(lcd, FB_BLANK_POWERDOWN); |
| } |
| |
| static int lms501kf03_resume(struct device *dev) |
| { |
| struct lms501kf03 *lcd = dev_get_drvdata(dev); |
| |
| lcd->power = FB_BLANK_POWERDOWN; |
| |
| return lms501kf03_power(lcd, FB_BLANK_UNBLANK); |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(lms501kf03_pm_ops, lms501kf03_suspend, |
| lms501kf03_resume); |
| |
| static void lms501kf03_shutdown(struct spi_device *spi) |
| { |
| struct lms501kf03 *lcd = spi_get_drvdata(spi); |
| |
| lms501kf03_power(lcd, FB_BLANK_POWERDOWN); |
| } |
| |
| static struct spi_driver lms501kf03_driver = { |
| .driver = { |
| .name = "lms501kf03", |
| .pm = &lms501kf03_pm_ops, |
| }, |
| .probe = lms501kf03_probe, |
| .remove = lms501kf03_remove, |
| .shutdown = lms501kf03_shutdown, |
| }; |
| |
| module_spi_driver(lms501kf03_driver); |
| |
| MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); |
| MODULE_DESCRIPTION("lms501kf03 LCD Driver"); |
| MODULE_LICENSE("GPL"); |