diff --git a/.mailmap b/.mailmap
index 2909c33..658003a 100644
--- a/.mailmap
+++ b/.mailmap
@@ -111,6 +111,7 @@
 Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
+Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>
diff --git a/Documentation/ABI/testing/sysfs-block-rssd b/Documentation/ABI/testing/sysfs-block-rssd
index 679ce35..beef30c 100644
--- a/Documentation/ABI/testing/sysfs-block-rssd
+++ b/Documentation/ABI/testing/sysfs-block-rssd
@@ -1,26 +1,5 @@
-What:           /sys/block/rssd*/registers
-Date:           March 2012
-KernelVersion:  3.3
-Contact:        Asai Thambi S P <asamymuthupa@micron.com>
-Description:    This is a read-only file. Dumps below driver information and
-                hardware registers.
-                    - S ACTive
-                    - Command Issue
-                    - Completed
-                    - PORT IRQ STAT
-                    - HOST IRQ STAT
-                    - Allocated
-                    - Commands in Q
-
 What:           /sys/block/rssd*/status
 Date:           April 2012
 KernelVersion:  3.4
 Contact:        Asai Thambi S P <asamymuthupa@micron.com>
 Description:    This is a read-only file. Indicates the status of the device.
-
-What:           /sys/block/rssd*/flags
-Date:           May 2012
-KernelVersion:  3.5
-Contact:        Asai Thambi S P <asamymuthupa@micron.com>
-Description:    This is a read-only file. Dumps the flags in port and driver
-                data structure
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 5bc8a47..cfedf63 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -219,6 +219,7 @@
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@@ -273,6 +274,7 @@
 What:		/sys/.../iio:deviceX/in_voltageX_scale_available
 What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
 What:		/sys/.../iio:deviceX/out_voltageX_scale_available
+What:		/sys/.../iio:deviceX/out_altvoltageX_scale_available
 What:		/sys/.../iio:deviceX/in_capacitance_scale_available
 KernelVersion:	2.635
 Contact:	linux-iio@vger.kernel.org
@@ -298,14 +300,19 @@
 		gives the 3dB frequency of the filter in Hz.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Raw (unscaled, no bias etc.) output voltage for
 		channel Y.  The number must always be specified and
 		unique if the output corresponds to a single channel.
+		While DAC like devices typically use out_voltage,
+		a continuous frequency generating device, such as
+		a DDS or PLL should use out_altvoltage.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -316,6 +323,8 @@
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -330,6 +339,8 @@
 
 What:		/sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
 What:		/sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -338,6 +349,8 @@
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -346,6 +359,24 @@
 		normal operation. Y may be suppressed if all outputs are
 		controlled together.
 
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Output frequency for channel Y in Hz. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Phase in radians of one frequency/clock output Y
+		(out_altvoltageY) relative to another frequency/clock output
+		(out_altvoltageZ) of the device X. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
+
 What:		/sys/bus/iio/devices/iio:deviceX/events
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml
index f5ac15e..e58934c 100644
--- a/Documentation/DocBook/media/v4l/pixfmt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt.xml
@@ -986,13 +986,13 @@
 	  <row id="V4L2-PIX-FMT-Y4">
 	    <entry><constant>V4L2_PIX_FMT_Y4</constant></entry>
 	    <entry>'Y04 '</entry>
-	    <entry>Old 4-bit greyscale format. Only the least significant 4 bits of each byte are used,
+	    <entry>Old 4-bit greyscale format. Only the most significant 4 bits of each byte are used,
 the other bits are set to 0.</entry>
 	  </row>
 	  <row id="V4L2-PIX-FMT-Y6">
 	    <entry><constant>V4L2_PIX_FMT_Y6</constant></entry>
 	    <entry>'Y06 '</entry>
-	    <entry>Old 6-bit greyscale format. Only the least significant 6 bits of each byte are used,
+	    <entry>Old 6-bit greyscale format. Only the most significant 6 bits of each byte are used,
 the other bits are set to 0.</entry>
 	  </row>
 	</tbody>
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index 015c561..008c2d73 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -560,6 +560,7 @@
     &sub-g-tuner;
     &sub-log-status;
     &sub-overlay;
+    &sub-prepare-buf;
     &sub-qbuf;
     &sub-querybuf;
     &sub-querycap;
@@ -567,7 +568,6 @@
     &sub-query-dv-preset;
     &sub-query-dv-timings;
     &sub-querystd;
-    &sub-prepare-buf;
     &sub-reqbufs;
     &sub-s-hw-freq-seek;
     &sub-streamon;
diff --git a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
index 765549f..a2474ec 100644
--- a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
@@ -108,10 +108,9 @@
 /></entry>
 	  </row>
 	  <row>
-	    <entry>__u32</entry>
+	    <entry>struct&nbsp;v4l2_format</entry>
 	    <entry><structfield>format</structfield></entry>
-	    <entry>Filled in by the application, preserved by the driver.
-	    See <xref linkend="v4l2-format" />.</entry>
+	    <entry>Filled in by the application, preserved by the driver.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
index e8714aa..98a856f 100644
--- a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
@@ -89,7 +89,7 @@
 	  <row>
 	    <entry></entry>
 	    <entry>&v4l2-event-frame-sync;</entry>
-            <entry><structfield>frame</structfield></entry>
+            <entry><structfield>frame_sync</structfield></entry>
 	    <entry>Event data for event V4L2_EVENT_FRAME_SYNC.</entry>
 	  </row>
 	  <row>
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
index 57aae77..65610bf5 100644
--- a/Documentation/arm/SPEAr/overview.txt
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -60,4 +60,4 @@
   Document Author
   ---------------
 
-  Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics
+  Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics
diff --git a/Documentation/device-mapper/verity.txt b/Documentation/device-mapper/verity.txt
index 32e4879..9884681 100644
--- a/Documentation/device-mapper/verity.txt
+++ b/Documentation/device-mapper/verity.txt
@@ -7,39 +7,39 @@
 
 Construction Parameters
 =======================
-    <version> <dev> <hash_dev> <hash_start>
+    <version> <dev> <hash_dev>
     <data_block_size> <hash_block_size>
     <num_data_blocks> <hash_start_block>
     <algorithm> <digest> <salt>
 
 <version>
-    This is the version number of the on-disk format.
+    This is the type of the on-disk hash format.
 
     0 is the original format used in the Chromium OS.
-	The salt is appended when hashing, digests are stored continuously and
-	the rest of the block is padded with zeros.
+      The salt is appended when hashing, digests are stored continuously and
+      the rest of the block is padded with zeros.
 
     1 is the current format that should be used for new devices.
-	The salt is prepended when hashing and each digest is
-	padded with zeros to the power of two.
+      The salt is prepended when hashing and each digest is
+      padded with zeros to the power of two.
 
 <dev>
-    This is the device containing the data the integrity of which needs to be
+    This is the device containing data, the integrity of which needs to be
     checked.  It may be specified as a path, like /dev/sdaX, or a device number,
     <major>:<minor>.
 
 <hash_dev>
-    This is the device that that supplies the hash tree data.  It may be
+    This is the device that supplies the hash tree data.  It may be
     specified similarly to the device path and may be the same device.  If the
-    same device is used, the hash_start should be outside of the dm-verity
-    configured device size.
+    same device is used, the hash_start should be outside the configured
+    dm-verity device.
 
 <data_block_size>
-    The block size on a data device.  Each block corresponds to one digest on
-    the hash device.
+    The block size on a data device in bytes.
+    Each block corresponds to one digest on the hash device.
 
 <hash_block_size>
-    The size of a hash block.
+    The size of a hash block in bytes.
 
 <num_data_blocks>
     The number of data blocks on the data device.  Additional blocks are
@@ -65,7 +65,7 @@
 Theory of operation
 ===================
 
-dm-verity is meant to be setup as part of a verified boot path.  This
+dm-verity is meant to be set up as part of a verified boot path.  This
 may be anything ranging from a boot using tboot or trustedgrub to just
 booting from a known-good device (like a USB drive or CD).
 
@@ -73,20 +73,20 @@
 has been authenticated in some way (cryptographic signatures, etc).
 After instantiation, all hashes will be verified on-demand during
 disk access.  If they cannot be verified up to the root node of the
-tree, the root hash, then the I/O will fail.  This should identify
+tree, the root hash, then the I/O will fail.  This should detect
 tampering with any data on the device and the hash data.
 
 Cryptographic hashes are used to assert the integrity of the device on a
-per-block basis.  This allows for a lightweight hash computation on first read
-into the page cache.  Block hashes are stored linearly-aligned to the nearest
-block the size of a page.
+per-block basis. This allows for a lightweight hash computation on first read
+into the page cache. Block hashes are stored linearly, aligned to the nearest
+block size.
 
 Hash Tree
 ---------
 
 Each node in the tree is a cryptographic hash.  If it is a leaf node, the hash
-is of some block data on disk.  If it is an intermediary node, then the hash is
-of a number of child nodes.
+of some data block on disk is calculated. If it is an intermediary node,
+the hash of a number of child nodes is calculated.
 
 Each entry in the tree is a collection of neighboring nodes that fit in one
 block.  The number is determined based on block_size and the size of the
@@ -110,63 +110,23 @@
 On-disk format
 ==============
 
-Below is the recommended on-disk format. The verity kernel code does not
-read the on-disk header. It only reads the hash blocks which directly
-follow the header. It is expected that a user-space tool will verify the
-integrity of the verity_header and then call dmsetup with the correct
-parameters. Alternatively, the header can be omitted and the dmsetup
-parameters can be passed via the kernel command-line in a rooted chain
-of trust where the command-line is verified.
+The verity kernel code does not read the verity metadata on-disk header.
+It only reads the hash blocks which directly follow the header.
+It is expected that a user-space tool will verify the integrity of the
+verity header.
 
-The on-disk format is especially useful in cases where the hash blocks
-are on a separate partition. The magic number allows easy identification
-of the partition contents. Alternatively, the hash blocks can be stored
-in the same partition as the data to be verified. In such a configuration
-the filesystem on the partition would be sized a little smaller than
-the full-partition, leaving room for the hash blocks.
-
-struct superblock {
-	uint8_t signature[8]
-		"verity\0\0";
-
-	uint8_t version;
-		1 - current format
-
-	uint8_t data_block_bits;
-		log2(data block size)
-
-	uint8_t hash_block_bits;
-		log2(hash block size)
-
-	uint8_t pad1[1];
-		zero padding
-
-	uint16_t salt_size;
-		big-endian salt size
-
-	uint8_t pad2[2];
-		zero padding
-
-	uint32_t data_blocks_hi;
-		big-endian high 32 bits of the 64-bit number of data blocks
-
-	uint32_t data_blocks_lo;
-		big-endian low 32 bits of the 64-bit number of data blocks
-
-	uint8_t algorithm[16];
-		cryptographic algorithm
-
-	uint8_t salt[384];
-		salt (the salt size is specified above)
-
-	uint8_t pad3[88];
-		zero padding to 512-byte boundary
-}
+Alternatively, the header can be omitted and the dmsetup parameters can
+be passed via the kernel command-line in a rooted chain of trust where
+the command-line is verified.
 
 Directly following the header (and with sector number padded to the next hash
 block boundary) are the hash blocks which are stored a depth at a time
 (starting from the root), sorted in order of increasing index.
 
+The full specification of kernel parameters and on-disk metadata format
+is available at the cryptsetup project's wiki page
+  http://code.google.com/p/cryptsetup/wiki/DMVerity
+
 Status
 ======
 V (for Valid) is returned if every check performed so far was valid.
@@ -174,21 +134,22 @@
 
 Example
 =======
-
-Setup a device:
-  dmsetup create vroot --table \
-    "0 2097152 "\
-    "verity 1 /dev/sda1 /dev/sda2 4096 4096 2097152 1 "\
+Set up a device:
+  # dmsetup create vroot --readonly --table \
+    "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\
     "4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\
     "1234000000000000000000000000000000000000000000000000000000000000"
 
 A command line tool veritysetup is available to compute or verify
-the hash tree or activate the kernel driver.  This is available from
-the LVM2 upstream repository and may be supplied as a package called
-device-mapper-verity-tools:
-    git://sources.redhat.com/git/lvm2
-    http://sourceware.org/git/?p=lvm2.git
-    http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/verity?cvsroot=lvm2
+the hash tree or activate the kernel device. This is available from
+the cryptsetup upstream repository http://code.google.com/p/cryptsetup/
+(as a libcryptsetup extension).
 
-veritysetup -a vroot /dev/sda1 /dev/sda2 \
-	4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+Create hash on the device:
+  # veritysetup format /dev/sda1 /dev/sda2
+  ...
+  Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+
+Activate the device:
+  # veritysetup create vroot /dev/sda1 /dev/sda2 \
+    4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt
index 951ca46..64fc82b 100644
--- a/Documentation/devicetree/bindings/arm/primecell.txt
+++ b/Documentation/devicetree/bindings/arm/primecell.txt
@@ -13,11 +13,17 @@
 Optional properties:
 
 - arm,primecell-periphid : Value to override the h/w value with
+- clocks : From common clock binding. First clock is phandle to clock for apb
+	pclk. Additional clocks are optional and specific to those peripherals.
+- clock-names : From common clock binding. Shall be "apb_pclk" for first clock.
 
 Example:
 
 serial@fff36000 {
 	compatible = "arm,pl011", "arm,primecell";
 	arm,primecell-periphid = <0x00341011>;
+	clocks = <&pclk>;
+	clock-names = "apb_pclk";
+	
 };
 
diff --git a/Documentation/devicetree/bindings/clock/calxeda.txt b/Documentation/devicetree/bindings/clock/calxeda.txt
new file mode 100644
index 0000000..0a6ac1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/calxeda.txt
@@ -0,0 +1,17 @@
+Device Tree Clock bindings for Calxeda highbank platform
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"calxeda,hb-pll-clock" - for a PLL clock
+	"calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the
+		A9 clock.
+	"calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock.
+	"calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller.
+- reg : shall be the control register offset from SYSREGs base for the clock.
+- clocks : shall be the input parent clock phandle for the clock. This is
+	either an oscillator or a pll output.
+- #clock-cells : from common clock binding; shall be set to 0.
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
new file mode 100644
index 0000000..eb65d41
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -0,0 +1,117 @@
+This binding is a work-in-progress, and are based on some experimental
+work by benh[1].
+
+Sources of clock signal can be represented by any node in the device
+tree.  Those nodes are designated as clock providers.  Clock consumer
+nodes use a phandle and clock specifier pair to connect clock provider
+outputs to clock inputs.  Similar to the gpio specifiers, a clock
+specifier is an array of one more more cells identifying the clock
+output on a device.  The length of a clock specifier is defined by the
+value of a #clock-cells property in the clock provider node.
+
+[1] http://patchwork.ozlabs.org/patch/31551/
+
+==Clock providers==
+
+Required properties:
+#clock-cells:	   Number of cells in a clock specifier; Typically 0 for nodes
+		   with a single clock output and 1 for nodes with multiple
+		   clock outputs.
+
+Optional properties:
+clock-output-names: Recommended to be a list of strings of clock output signal
+		    names indexed by the first cell in the clock specifier.
+		    However, the meaning of clock-output-names is domain
+		    specific to the clock provider, and is only provided to
+		    encourage using the same meaning for the majority of clock
+		    providers.  This format may not work for clock providers
+		    using a complex clock specifier format.  In those cases it
+		    is recommended to omit this property and create a binding
+		    specific names property.
+
+		    Clock consumer nodes must never directly reference
+		    the provider's clock-output-names property.
+
+For example:
+
+    oscillator {
+        #clock-cells = <1>;
+        clock-output-names = "ckil", "ckih";
+    };
+
+- this node defines a device with two clock outputs, the first named
+  "ckil" and the second named "ckih".  Consumer nodes always reference
+  clocks by index. The names should reflect the clock output signal
+  names for the device.
+
+==Clock consumers==
+
+Required properties:
+clocks:		List of phandle and clock specifier pairs, one pair
+		for each clock input to the device.  Note: if the
+		clock provider specifies '0' for #clock-cells, then
+		only the phandle portion of the pair will appear.
+
+Optional properties:
+clock-names:	List of clock input name strings sorted in the same
+		order as the clocks property.  Consumers drivers
+		will use clock-names to match clock input names
+		with clocks specifiers.
+clock-ranges:	Empty property indicating that child nodes can inherit named
+		clocks from this node. Useful for bus nodes to provide a
+		clock to their children.
+
+For example:
+
+    device {
+        clocks = <&osc 1>, <&ref 0>;
+        clock-names = "baud", "register";
+    };
+
+
+This represents a device with two clock inputs, named "baud" and "register".
+The baud clock is connected to output 1 of the &osc device, and the register
+clock is connected to output 0 of the &ref.
+
+==Example==
+
+    /* external oscillator */
+    osc: oscillator {
+        compatible = "fixed-clock";
+        #clock-cells = <1>;
+        clock-frequency  = <32678>;
+        clock-output-names = "osc";
+    };
+
+    /* phase-locked-loop device, generates a higher frequency clock
+     * from the external oscillator reference */
+    pll: pll@4c000 {
+        compatible = "vendor,some-pll-interface"
+        #clock-cells = <1>;
+        clocks = <&osc 0>;
+        clock-names = "ref";
+        reg = <0x4c000 0x1000>;
+        clock-output-names = "pll", "pll-switched";
+    };
+
+    /* UART, using the low frequency oscillator for the baud clock,
+     * and the high frequency switched PLL output for register
+     * clocking */
+    uart@a000 {
+        compatible = "fsl,imx-uart";
+        reg = <0xa000 0x1000>;
+        interrupts = <33>;
+        clocks = <&osc 0>, <&pll 1>;
+        clock-names = "baud", "register";
+    };
+
+This DT fragment defines three devices: an external oscillator to provide a
+low-frequency reference clock, a PLL device to generate a higher frequency
+clock signal, and a UART.
+
+* The oscillator is fixed-frequency, and provides one clock output, named "osc".
+* The PLL is both a clock provider and a clock consumer. It uses the clock
+  signal generated by the external oscillator, and provides two output signals
+  ("pll" and "pll-switched").
+* The UART has its baud clock connected the external oscillator and its
+  register clock connected to the PLL clock (the "pll-switched" signal)
diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.txt b/Documentation/devicetree/bindings/clock/fixed-clock.txt
new file mode 100644
index 0000000..0b1fe78
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-clock.txt
@@ -0,0 +1,21 @@
+Binding for simple fixed-rate clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "fixed-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clock-frequency : frequency of clock in Hz. Should be a single cell.
+
+Optional properties:
+- gpios : From common gpio binding; gpio connection to clock enable pin.
+- clock-output-names : From common clock binding.
+
+Example:
+	clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000000>;
+	};
diff --git a/Documentation/devicetree/bindings/input/fsl-mma8450.txt b/Documentation/devicetree/bindings/input/fsl-mma8450.txt
index a00c94c..0b96e57 100644
--- a/Documentation/devicetree/bindings/input/fsl-mma8450.txt
+++ b/Documentation/devicetree/bindings/input/fsl-mma8450.txt
@@ -2,6 +2,7 @@
 
 Required properties:
 - compatible : "fsl,mma8450".
+- reg: the I2C address of MMA8450
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
index 19f6af4..baf0798 100644
--- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -46,8 +46,8 @@
 
 ecspi@70010000 { /* ECSPI1 */
 	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
-		   <&gpio3 25 0>; /* GPIO4_25 */
+	cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
+		   <&gpio4 25 0>; /* GPIO4_25 */
 	status = "okay";
 
 	pmic: mc13892@0 {
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index c7e404b..fea541e 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -29,6 +29,6 @@
 	compatible = "fsl,imx51-esdhc";
 	reg = <0x70008000 0x4000>;
 	interrupts = <2>;
-	cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
-	wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+	cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
+	wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
 };
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 7ab9e1a..4616fc2 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -19,6 +19,6 @@
 	reg = <0x83fec000 0x4000>;
 	interrupts = <87>;
 	phy-mode = "mii";
-	phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */
+	phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
 	local-mac-address = [00 04 9F 01 1B B9];
 };
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 9841057..4256a6d 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -17,6 +17,6 @@
 	reg = <0x70010000 0x4000>;
 	interrupts = <36>;
 	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
-		   <&gpio3 25 0>; /* GPIO4_25 */
+	cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
+		   <&gpio3 25 0>; /* GPIO3_25 */
 };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 6eab917..db4d3af 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -3,6 +3,7 @@
 This isn't an exhaustive list, but you should add new prefixes to it before
 using them to avoid name-space collisions.
 
+ad	Avionic Design GmbH
 adi	Analog Devices, Inc.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 apm	Applied Micro Circuits Corporation (APM)
diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index 84d46c0..c86b50c 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -6,7 +6,9 @@
     Prefix: 'coretemp'
     CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
                               0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
-                              0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield)
+                              0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
+                              0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
+                              0x36 (Cedar Trail Atom)
     Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
                Volume 3A: System Programming Guide
                http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
@@ -52,6 +54,17 @@
 
 Process		Processor					TjMax(C)
 
+22nm		Core i5/i7 Processors
+		i7 3920XM, 3820QM, 3720QM, 3667U, 3520M		105
+		i5 3427U, 3360M/3320M				105
+		i7 3770/3770K					105
+		i5 3570/3570K, 3550, 3470/3450			105
+		i7 3770S					103
+		i5 3570S/3550S, 3475S/3470S/3450S		103
+		i7 3770T					94
+		i5 3570T					94
+		i5 3470T					91
+
 32nm		Core i3/i5/i7 Processors
 		i7 660UM/640/620, 640LM/620, 620M, 610E		105
 		i5 540UM/520/430, 540M/520/450/430		105
@@ -65,6 +78,11 @@
 		U3400						105
 		P4505/P4500 					90
 
+32nm		Atom Processors
+		Z2460						90
+		D2700/2550/2500					100
+		N2850/2800/2650/2600				100
+
 45nm		Xeon Processors 5400 Quad-Core
 		X5492, X5482, X5472, X5470, X5460, X5450	85
 		E5472, E5462, E5450/40/30/20/10/05		85
@@ -85,6 +103,8 @@
 		N475/470/455/450				100
 		N280/270					90
 		330/230						125
+		E680/660/640/620				90
+		E680T/660T/640T/620T				110
 
 45nm		Core2 Processors
 		Solo ULV SU3500/3300				100
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index ab1e8d7..5cb9a19 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -10,8 +10,8 @@
 (i.e. 7xxx/5xxx SoCs), SPEAr (arm), Loongson1B (mips) and XLINX XC2V3000
 FF1152AMT0221 D1215994A VIRTEX FPGA board.
 
-DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether MAC 10/100
-Universal version 4.0 have been used for developing this driver.
+DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether
+MAC 10/100 Universal version 4.0 have been used for developing this driver.
 
 This driver supports both the platform bus and PCI.
 
@@ -54,27 +54,27 @@
 When one or more packets are received, an interrupt happens. The interrupts
 are not queued so the driver has to scan all the descriptors in the ring during
 the receive process.
-This is based on NAPI so the interrupt handler signals only if there is work to be
-done, and it exits.
+This is based on NAPI so the interrupt handler signals only if there is work
+to be done, and it exits.
 Then the poll method will be scheduled at some future point.
 The incoming packets are stored, by the DMA, in a list of pre-allocated socket
 buffers in order to avoid the memcpy (Zero-copy).
 
 4.3) Timer-Driver Interrupt
-Instead of having the device that asynchronously notifies the frame receptions, the
-driver configures a timer to generate an interrupt at regular intervals.
-Based on the granularity of the timer, the frames that are received by the device
-will experience different levels of latency. Some NICs have dedicated timer
-device to perform this task. STMMAC can use either the RTC device or the TMU
-channel 2  on STLinux platforms.
+Instead of having the device that asynchronously notifies the frame receptions,
+the driver configures a timer to generate an interrupt at regular intervals.
+Based on the granularity of the timer, the frames that are received by the
+device will experience different levels of latency. Some NICs have dedicated
+timer device to perform this task. STMMAC can use either the RTC device or the
+TMU channel 2  on STLinux platforms.
 The timers frequency can be passed to the driver as parameter; when change it,
 take care of both hardware capability and network stability/performance impact.
-Several performance tests on STM platforms showed this optimisation allows to spare
-the CPU while having the maximum throughput.
+Several performance tests on STM platforms showed this optimisation allows to
+spare the CPU while having the maximum throughput.
 
 4.4) WOL
-Wake up on Lan feature through Magic and Unicast frames are supported for the GMAC
-core.
+Wake up on Lan feature through Magic and Unicast frames are supported for the
+GMAC core.
 
 4.5) DMA descriptors
 Driver handles both normal and enhanced descriptors. The latter has been only
@@ -106,7 +106,8 @@
 These are included in the include/linux/stmmac.h header file
 and detailed below as well:
 
- struct plat_stmmacenet_data {
+struct plat_stmmacenet_data {
+	char *phy_bus_name;
 	int bus_id;
 	int phy_addr;
 	int interface;
@@ -124,19 +125,24 @@
 	void (*bus_setup)(void __iomem *ioaddr);
 	int (*init)(struct platform_device *pdev);
 	void (*exit)(struct platform_device *pdev);
+	void *custom_cfg;
+	void *custom_data;
 	void *bsp_priv;
  };
 
 Where:
+ o phy_bus_name: phy bus name to attach to the stmmac.
  o bus_id: bus identifier.
  o phy_addr: the physical address can be passed from the platform.
 	    If it is set to -1 the driver will automatically
 	    detect it at run-time by probing all the 32 addresses.
  o interface: PHY device's interface.
  o mdio_bus_data: specific platform fields for the MDIO bus.
- o pbl: the Programmable Burst Length is maximum number of beats to
+ o dma_cfg: internal DMA parameters
+   o pbl: the Programmable Burst Length is maximum number of beats to
        be transferred in one DMA transaction.
        GMAC also enables the 4xPBL by default.
+   o fixed_burst/mixed_burst/burst_len
  o clk_csr: fixed CSR Clock range selection.
  o has_gmac: uses the GMAC core.
  o enh_desc: if sets the MAC will use the enhanced descriptor structure.
@@ -160,8 +166,9 @@
 	     this is sometime necessary on some platforms (e.g. ST boxes)
 	     where the HW needs to have set some PIO lines or system cfg
 	     registers.
- o custom_cfg: this is a custom configuration that can be passed while
-	      initialising the resources.
+ o custom_cfg/custom_data: this is a custom configuration that can be passed
+			   while initialising the resources.
+ o bsp_priv: another private poiter.
 
 For MDIO bus The we have:
 
@@ -180,7 +187,6 @@
  o irqs: list of IRQs, one per PHY.
  o probed_phy_irq: if irqs is NULL, use this for probed PHY.
 
-
 For DMA engine we have the following internal fields that should be
 tuned according to the HW capabilities.
 
diff --git a/Documentation/prctl/no_new_privs.txt b/Documentation/prctl/no_new_privs.txt
new file mode 100644
index 0000000..f7be84f
--- /dev/null
+++ b/Documentation/prctl/no_new_privs.txt
@@ -0,0 +1,57 @@
+The execve system call can grant a newly-started program privileges that
+its parent did not have.  The most obvious examples are setuid/setgid
+programs and file capabilities.  To prevent the parent program from
+gaining these privileges as well, the kernel and user code must be
+careful to prevent the parent from doing anything that could subvert the
+child.  For example:
+
+ - The dynamic loader handles LD_* environment variables differently if
+   a program is setuid.
+
+ - chroot is disallowed to unprivileged processes, since it would allow
+   /etc/passwd to be replaced from the point of view of a process that
+   inherited chroot.
+
+ - The exec code has special handling for ptrace.
+
+These are all ad-hoc fixes.  The no_new_privs bit (since Linux 3.5) is a
+new, generic mechanism to make it safe for a process to modify its
+execution environment in a manner that persists across execve.  Any task
+can set no_new_privs.  Once the bit is set, it is inherited across fork,
+clone, and execve and cannot be unset.  With no_new_privs set, execve
+promises not to grant the privilege to do anything that could not have
+been done without the execve call.  For example, the setuid and setgid
+bits will no longer change the uid or gid; file capabilities will not
+add to the permitted set, and LSMs will not relax constraints after
+execve.
+
+To set no_new_privs, use prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0).
+
+Be careful, though: LSMs might also not tighten constraints on exec
+in no_new_privs mode.  (This means that setting up a general-purpose
+service launcher to set no_new_privs before execing daemons may
+interfere with LSM-based sandboxing.)
+
+Note that no_new_privs does not prevent privilege changes that do not
+involve execve.  An appropriately privileged task can still call
+setuid(2) and receive SCM_RIGHTS datagrams.
+
+There are two main use cases for no_new_privs so far:
+
+ - Filters installed for the seccomp mode 2 sandbox persist across
+   execve and can change the behavior of newly-executed programs.
+   Unprivileged users are therefore only allowed to install such filters
+   if no_new_privs is set.
+
+ - By itself, no_new_privs can be used to reduce the attack surface
+   available to an unprivileged user.  If everything running with a
+   given uid has no_new_privs set, then that uid will be unable to
+   escalate its privileges by directly attacking setuid, setgid, and
+   fcap-using binaries; it will need to compromise something without the
+   no_new_privs bit set first.
+
+In the future, other potentially dangerous kernel features could become
+available to unprivileged tasks if no_new_privs is set.  In principle,
+several options to unshare(2) and clone(2) would be safe when
+no_new_privs is set, and no_new_privs + chroot is considerable less
+dangerous than chroot by itself.
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index f0ab5cf..4a7b54b 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -12,6 +12,12 @@
    marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
    security issue, or some "oh, that's not good" issue.  In short, something
    critical.
+ - Serious issues as reported by a user of a distribution kernel may also
+   be considered if they fix a notable performance or interactivity issue.
+   As these fixes are not as obvious and have a higher risk of a subtle
+   regression they should only be submitted by a distribution kernel
+   maintainer and include an addendum linking to a bugzilla entry if it
+   exists and additional information on the user-visible impact.
  - New device IDs and quirks are also accepted.
  - No "theoretical race condition" issues, unless an explanation of how the
    race can be exploited is also provided.
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 9301266..2c99483 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1930,6 +1930,23 @@
 PTE's RPN field (ie, it needs to be shifted left by 12 to OR it
 into the hash PTE second double word).
 
+4.75 KVM_IRQFD
+
+Capability: KVM_CAP_IRQFD
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_irqfd (in)
+Returns: 0 on success, -1 on error
+
+Allows setting an eventfd to directly trigger a guest interrupt.
+kvm_irqfd.fd specifies the file descriptor to use as the eventfd and
+kvm_irqfd.gsi specifies the irqchip pin toggled by this event.  When
+an event is tiggered on the eventfd, an interrupt is injected into
+the guest using the specified gsi pin.  The irqfd is removed using
+the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd
+and kvm_irqfd.gsi.
+
+
 5. The kvm_run structure
 ------------------------
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 14bc707..51b2e1c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -579,7 +579,7 @@
 F:	net/appletalk/
 
 ARASAN COMPACT FLASH PATA CONTROLLER
-M:	Viresh Kumar <viresh.kumar@st.com>
+M:     Viresh Kumar <viresh.linux@gmail.com>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	include/linux/pata_arasan_cf_data.h
@@ -1646,11 +1646,11 @@
 F:	drivers/gpio/gpio-bt8xx.c
 
 BTRFS FILE SYSTEM
-M:	Chris Mason <chris.mason@oracle.com>
+M:	Chris Mason <chris.mason@fusionio.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs.git
 S:	Maintained
 F:	Documentation/filesystems/btrfs.txt
 F:	fs/btrfs/
@@ -1800,6 +1800,9 @@
 CFG80211 and NL80211
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	include/linux/nl80211.h
 F:	include/net/cfg80211.h
@@ -4349,7 +4352,8 @@
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	Documentation/networking/mac80211-injection.txt
 F:	include/net/mac80211.h
@@ -4360,7 +4364,8 @@
 M:	Mattias Nissler <mattias.nissler@gmx.de>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	net/mac80211/rc80211_pid*
 
@@ -4649,8 +4654,8 @@
 L:	coreteam@netfilter.org
 W:	http://www.netfilter.org/
 W:	http://www.iptables.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
+T:	git git://1984.lsi.us.es/nf
+T:	git git://1984.lsi.us.es/nf-next
 S:	Supported
 F:	include/linux/netfilter*
 F:	include/linux/netfilter/
@@ -5291,7 +5296,7 @@
 F:	drivers/pinctrl/
 
 PIN CONTROLLER - ST SPEAR
-M:	Viresh Kumar <viresh.kumar@st.com>
+M:     Viresh Kumar <viresh.linux@gmail.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
@@ -5711,6 +5716,9 @@
 RFKILL
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	Documentation/rfkill.txt
 F:	net/rfkill/
@@ -5865,7 +5873,7 @@
 F:	drivers/tty/serial
 
 SYNOPSYS DESIGNWARE DMAC DRIVER
-M:	Viresh Kumar <viresh.kumar@st.com>
+M:     Viresh Kumar <viresh.linux@gmail.com>
 S:	Maintained
 F:	include/linux/dw_dmac.h
 F:	drivers/dma/dw_dmac_regs.h
@@ -6013,7 +6021,7 @@
 F:	drivers/mmc/host/sdhci-s3c.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
-M:	Viresh Kumar <viresh.kumar@st.com>
+M:     Viresh Kumar <viresh.linux@gmail.com>
 L:	spear-devel@list.st.com
 L:	linux-mmc@vger.kernel.org
 S:	Maintained
@@ -6369,7 +6377,7 @@
 F:	include/linux/compiler.h
 
 SPEAR PLATFORM SUPPORT
-M:	Viresh Kumar <viresh.kumar@st.com>
+M:     Viresh Kumar <viresh.linux@gmail.com>
 M:	Shiraz Hashim <shiraz.hashim@st.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -6378,7 +6386,7 @@
 F:	arch/arm/plat-spear/
 
 SPEAR13XX MACHINE SUPPORT
-M:	Viresh Kumar <viresh.kumar@st.com>
+M:     Viresh Kumar <viresh.linux@gmail.com>
 M:	Shiraz Hashim <shiraz.hashim@st.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -6387,7 +6395,7 @@
 F:	arch/arm/mach-spear13xx/
 
 SPEAR3XX MACHINE SUPPORT
-M:	Viresh Kumar <viresh.kumar@st.com>
+M:     Viresh Kumar <viresh.linux@gmail.com>
 M:	Shiraz Hashim <shiraz.hashim@st.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -6398,7 +6406,7 @@
 SPEAR6XX MACHINE SUPPORT
 M:	Rajeev Kumar <rajeev-dlh.kumar@st.com>
 M:	Shiraz Hashim <shiraz.hashim@st.com>
-M:	Viresh Kumar <viresh.kumar@st.com>
+M:     Viresh Kumar <viresh.linux@gmail.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
@@ -6406,7 +6414,7 @@
 F:	arch/arm/mach-spear6xx/
 
 SPEAR CLOCK FRAMEWORK SUPPORT
-M:	Viresh Kumar <viresh.kumar@st.com>
+M:     Viresh Kumar <viresh.linux@gmail.com>
 L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
@@ -7413,7 +7421,7 @@
 
 VME SUBSYSTEM
 M:	Martyn Welch <martyn.welch@ge.com>
-M:	Manohar Vanga <manohar.vanga@cern.ch>
+M:	Manohar Vanga <manohar.vanga@gmail.com>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	devel@driverdev.osuosl.org
 S:	Maintained
@@ -7569,6 +7577,7 @@
 S:	Supported
 F:	Documentation/hwmon/wm83??
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
+F:	drivers/clk/clk-wm83*.c
 F:	drivers/leds/leds-wm83*.c
 F:	drivers/hwmon/wm83??-hwmon.c
 F:	drivers/input/misc/wm831x-on.c
diff --git a/Makefile b/Makefile
index d845c2a..bf02707 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc6
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*
@@ -561,6 +561,8 @@
 KBUILD_CFLAGS	+= -O2
 endif
 
+include $(srctree)/arch/$(SRCARCH)/Makefile
+
 ifdef CONFIG_READABLE_ASM
 # Disable optimizations that make assembler listings hard to read.
 # reorder blocks reorders the control in the function
@@ -571,8 +573,6 @@
                  $(call cc-option,-fno-partial-inlining)
 endif
 
-include $(srctree)/arch/$(SRCARCH)/Makefile
-
 ifneq ($(CONFIG_FRAME_WARN),0)
 KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 endif
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 84449dd..f3c60ff 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -254,8 +254,8 @@
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
 	select ARCH_HAS_CPUFREQ
-	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
+	select COMMON_CLK
+	select CLK_VERSATILE
 	select HAVE_TCM
 	select ICST
 	select GENERIC_CLOCKEVENTS
@@ -277,6 +277,7 @@
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PLAT_VERSATILE
+	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_CLCD
 	select ARM_TIMER_SP804
 	select GPIO_PL061 if GPIOLIB
@@ -293,7 +294,9 @@
 	select ICST
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select NEED_MACH_IO_H if PCI
 	select PLAT_VERSATILE
+	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_CLCD
 	select PLAT_VERSATILE_FPGA_IRQ
 	select ARM_TIMER_SP804
@@ -313,6 +316,7 @@
 	select ICST
 	select NO_IOPORT
 	select PLAT_VERSATILE
+	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_CLCD
 	help
 	  This enables support for the ARM Ltd Versatile Express boards.
@@ -348,6 +352,7 @@
 	select ARM_TIMER_SP804
 	select CACHE_L2X0
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
@@ -588,6 +593,7 @@
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
+	select NEED_MACH_IO_H
 	select PLAT_ORION
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
@@ -886,7 +892,7 @@
 	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
+	select COMMON_CLK
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 83e7229..2e1cfa0 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Calxeda, Inc.
+ * Copyright 2011-2012 Calxeda, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -24,6 +24,7 @@
 	compatible = "calxeda,highbank";
 	#address-cells = <1>;
 	#size-cells = <1>;
+	clock-ranges;
 
 	cpus {
 		#address-cells = <1>;
@@ -33,24 +34,32 @@
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
 		};
 
 		cpu@1 {
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
 		};
 
 		cpu@2 {
 			compatible = "arm,cortex-a9";
 			reg = <2>;
 			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
 		};
 
 		cpu@3 {
 			compatible = "arm,cortex-a9";
 			reg = <3>;
 			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
 		};
 	};
 
@@ -75,12 +84,14 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xfff10600 0x20>;
 			interrupts = <1 13 0xf01>;
+			clocks = <&a9periphclk>;
 		};
 
 		watchdog@fff10620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0xfff10620 0x20>;
 			interrupts = <1 14 0xf01>;
+			clocks = <&a9periphclk>;
 		};
 
 		intc: interrupt-controller@fff11000 {
@@ -116,12 +127,15 @@
 			compatible = "calxeda,hb-sdhci";
 			reg = <0xffe0e000 0x1000>;
 			interrupts = <0 90 4>;
+			clocks = <&eclk>;
 		};
 
 		ipc@fff20000 {
 			compatible = "arm,pl320", "arm,primecell";
 			reg = <0xfff20000 0x1000>;
 			interrupts = <0 7 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpioe: gpio@fff30000 {
@@ -130,6 +144,8 @@
 			gpio-controller;
 			reg = <0xfff30000 0x1000>;
 			interrupts = <0 14 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpiof: gpio@fff31000 {
@@ -138,6 +154,8 @@
 			gpio-controller;
 			reg = <0xfff31000 0x1000>;
 			interrupts = <0 15 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpiog: gpio@fff32000 {
@@ -146,6 +164,8 @@
 			gpio-controller;
 			reg = <0xfff32000 0x1000>;
 			interrupts = <0 16 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpioh: gpio@fff33000 {
@@ -154,24 +174,32 @@
 			gpio-controller;
 			reg = <0xfff33000 0x1000>;
 			interrupts = <0 17 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		timer {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0xfff34000 0x1000>;
 			interrupts = <0 18 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		rtc@fff35000 {
 			compatible = "arm,pl031", "arm,primecell";
 			reg = <0xfff35000 0x1000>;
 			interrupts = <0 19 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		serial@fff36000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xfff36000 0x1000>;
 			interrupts = <0 20 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		smic@fff3a000 {
@@ -186,12 +214,73 @@
 		sregs@fff3c000 {
 			compatible = "calxeda,hb-sregs";
 			reg = <0xfff3c000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				osc: oscillator {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <33333000>;
+				};
+
+				ddrpll: ddrpll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x108>;
+				};
+
+				a9pll: a9pll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x100>;
+				};
+
+				a9periphclk: a9periphclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-a9periph-clock";
+					clocks = <&a9pll>;
+					reg = <0x104>;
+				};
+
+				a9bclk: a9bclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-a9bus-clock";
+					clocks = <&a9pll>;
+					reg = <0x104>;
+				};
+
+				emmcpll: emmcpll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x10C>;
+				};
+
+				eclk: eclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-emmc-clock";
+					clocks = <&emmcpll>;
+					reg = <0x114>;
+				};
+
+				pclk: pclk {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <150000000>;
+				};
+			};
 		};
 
 		dma@fff3d000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xfff3d000 0x1000>;
 			interrupts = <0 92 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		ethernet@fff50000 {
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
index 153a4b2..c9b4f27 100644
--- a/arch/arm/boot/dts/mmp2-brownstone.dts
+++ b/arch/arm/boot/dts/mmp2-brownstone.dts
@@ -11,7 +11,7 @@
 /include/ "mmp2.dtsi"
 
 / {
-	model = "Marvell MMP2 Aspenite Development Board";
+	model = "Marvell MMP2 Brownstone Development Board";
 	compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
 
 	chosen {
@@ -19,7 +19,7 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x04000000>;
+		reg = <0x00000000 0x08000000>;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f2ab4ea..581cb08 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -44,6 +44,8 @@
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			ti,intc-size = <96>;
+			reg = <0x480FE000 0x1000>;
 		};
 
 		uart1: serial@4806a000 {
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index 8314e41..dd4358b 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr1310 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
index 9e61da4..419ea74 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr1310 SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index 0d8472e..c9a54e0 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr1340 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index a26fc47..d71fe2a 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr1340 SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 1f8e1e1..10dcec7 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr13xx SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
index fc82b1a..d71b8d5 100644
--- a/arch/arm/boot/dts/spear300-evb.dts
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr300 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index 01c5e35..ed3627c 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr300 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
index dc5e2d4..b00544e 100644
--- a/arch/arm/boot/dts/spear310-evb.dts
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr310 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index e47081c..62fc4fb 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr310 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index 6308fa3..c13fd1f 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr320 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index 5372ca3..1f49d69 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr320 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
index 91072553..3a8bb57 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr3xx SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 9d7eb53..aa07f59 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -366,8 +366,8 @@
 	struct safe_buffer *buf;
 	unsigned long off;
 
-	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
-		__func__, addr, off, sz, dir);
+	dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+		__func__, addr, sz, dir);
 
 	buf = find_safe_buffer_dev(dev, addr, __func__);
 	if (!buf)
@@ -377,8 +377,8 @@
 
 	BUG_ON(buf->direction != dir);
 
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+		__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
 		buf->safe, buf->safe_dma_addr);
 
 	DO_STATS(dev->archdata.dmabounce->bounce_count++);
@@ -406,8 +406,8 @@
 	struct safe_buffer *buf;
 	unsigned long off;
 
-	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
-		__func__, addr, off, sz, dir);
+	dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+		__func__, addr, sz, dir);
 
 	buf = find_safe_buffer_dev(dev, addr, __func__);
 	if (!buf)
@@ -417,8 +417,8 @@
 
 	BUG_ON(buf->direction != dir);
 
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+		__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
 		buf->safe, buf->safe_dma_addr);
 
 	DO_STATS(dev->archdata.dmabounce->bounce_count++);
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 68374ba..c79f61f 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -243,7 +243,7 @@
 
 #define ATOMIC64_INIT(i) { (i) }
 
-static inline u64 atomic64_read(atomic64_t *v)
+static inline u64 atomic64_read(const atomic64_t *v)
 {
 	u64 result;
 
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
index 3d22204..6ddbe44 100644
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -60,13 +60,13 @@
 #ifndef __ASSEMBLY__
 
 #ifdef CONFIG_CPU_USE_DOMAINS
-#define set_domain(x)					\
-	do {						\
-	__asm__ __volatile__(				\
-	"mcr	p15, 0, %0, c3, c0	@ set domain"	\
-	  : : "r" (x));					\
-	isb();						\
-	} while (0)
+static inline void set_domain(unsigned val)
+{
+	asm volatile(
+	"mcr	p15, 0, %0, c3, c0	@ set domain"
+	  : : "r" (val));
+	isb();
+}
 
 #define modify_domain(dom,type)					\
 	do {							\
@@ -78,8 +78,8 @@
 	} while (0)
 
 #else
-#define set_domain(x)		do { } while (0)
-#define modify_domain(dom,type)	do { } while (0)
+static inline void set_domain(unsigned val) { }
+static inline void modify_domain(unsigned dom, unsigned type)	{ }
 #endif
 
 /*
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 7be5469..e42cf59 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -19,6 +19,7 @@
 	"	.long	1b, 4f, 2b, 4f\n"			\
 	"	.popsection\n"					\
 	"	.pushsection .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
 	"4:	mov	%0, " err_reg "\n"			\
 	"	b	3b\n"					\
 	"	.popsection"
diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h
index e0d1c0c..6b9b077 100644
--- a/arch/arm/include/asm/hardware/sp810.h
+++ b/arch/arm/include/asm/hardware/sp810.h
@@ -4,7 +4,7 @@
  * ARM PrimeXsys System Controller SP810 header file
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index b79f8e9..af7b0bd 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -148,7 +148,6 @@
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
 #define TIF_SYSCALL_AUDIT	9
-#define TIF_SYSCALL_RESTARTSYS	10
 #define TIF_POLLING_NRFLAG	16
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
@@ -164,11 +163,9 @@
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
-#define _TIF_SYSCALL_RESTARTSYS	(1 << TIF_SYSCALL_RESTARTSYS)
 
 /* Checks for any syscall work in entry-common.S */
-#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
-			   _TIF_SYSCALL_RESTARTSYS)
+#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
 
 /*
  * Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 437f0c4..0d1851c 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -495,6 +495,7 @@
  * The out of line fixup for the ldrt above.
  */
 	.pushsection .fixup, "ax"
+	.align	2
 4:	mov	pc, r9
 	.popsection
 	.pushsection __ex_table,"a"
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index ba32b39..38c1a3b 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -187,8 +187,8 @@
 	TEST_BF_R ("mov	pc, r",0,2f,"")
 	TEST_BF_RR("mov	pc, r",0,2f,", asl r",1,0,"")
 	TEST_BB(   "sub	pc, pc, #1b-2b+8")
-#if __LINUX_ARM_ARCH__ >= 6
-	TEST_BB(   "sub	pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
+	TEST_BB(   "sub	pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
 #endif
 	TEST_BB_R( "sub	pc, pc, r",14, 1f-2f+8,"")
 	TEST_BB_R( "rsb	pc, r",14,1f-2f+8,", pc")
diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c
index 8f96ec7..6123daf 100644
--- a/arch/arm/kernel/kprobes-thumb.c
+++ b/arch/arm/kernel/kprobes-thumb.c
@@ -660,7 +660,7 @@
 	/* LDRSB (literal)	1111 1001 x001 1111 xxxx xxxx xxxx xxxx */
 	/* LDRH (literal)	1111 1000 x011 1111 xxxx xxxx xxxx xxxx */
 	/* LDRSH (literal)	1111 1001 x011 1111 xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
+	DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
 						 REGS(PC, NOSPPCX, 0, 0, 0)),
 
 	/* STRB (immediate)	1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 186c8cb..a02eada 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -503,7 +503,7 @@
 	     event_requires_mode_exclusion(&event->attr)) {
 		pr_debug("ARM performance counters do not support "
 			 "mode exclusion\n");
-		return -EPERM;
+		return -EOPNOTSUPP;
 	}
 
 	/*
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 5700a7a..14e3826 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -25,7 +25,6 @@
 #include <linux/regset.h>
 #include <linux/audit.h>
 #include <linux/tracehook.h>
-#include <linux/unistd.h>
 
 #include <asm/pgtable.h>
 #include <asm/traps.h>
@@ -918,8 +917,6 @@
 		audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
-	if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS))
-		scno = __NR_restart_syscall - __NR_SYSCALL_BASE;
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		return scno;
 
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index fd2392a..536c5d6 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -27,6 +27,7 @@
  */
 #define SWI_SYS_SIGRETURN	(0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
 #define SWI_SYS_RT_SIGRETURN	(0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RESTART		(0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
 
 /*
  * With EABI, the syscall number has to be loaded into r7.
@@ -47,6 +48,18 @@
 };
 
 /*
+ * Either we support OABI only, or we have EABI with the OABI
+ * compat layer enabled.  In the later case we don't know if
+ * user space is EABI or not, and if not we must not clobber r7.
+ * Always using the OABI syscall solves that issue and works for
+ * all those cases.
+ */
+const unsigned long syscall_restart_code[2] = {
+	SWI_SYS_RESTART,	/* swi	__NR_restart_syscall */
+	0xe49df004,		/* ldr	pc, [sp], #4 */
+};
+
+/*
  * atomically swap in the new signal mask, and wait for a signal.
  */
 asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
@@ -592,10 +605,12 @@
 		case -ERESTARTNOHAND:
 		case -ERESTARTSYS:
 		case -ERESTARTNOINTR:
-		case -ERESTART_RESTARTBLOCK:
 			regs->ARM_r0 = regs->ARM_ORIG_r0;
 			regs->ARM_pc = restart_addr;
 			break;
+		case -ERESTART_RESTARTBLOCK:
+			regs->ARM_r0 = -EINTR;
+			break;
 		}
 	}
 
@@ -611,14 +626,12 @@
 		 * debugger has chosen to restart at a different PC.
 		 */
 		if (regs->ARM_pc == restart_addr) {
-			if (retval == -ERESTARTNOHAND ||
-			    retval == -ERESTART_RESTARTBLOCK
+			if (retval == -ERESTARTNOHAND
 			    || (retval == -ERESTARTSYS
 				&& !(ka.sa.sa_flags & SA_RESTART))) {
 				regs->ARM_r0 = -EINTR;
 				regs->ARM_pc = continue_addr;
 			}
-			clear_thread_flag(TIF_SYSCALL_RESTARTSYS);
 		}
 
 		handle_signal(signr, &ka, &info, regs);
@@ -632,8 +645,29 @@
 		 * ignore the restart.
 		 */
 		if (retval == -ERESTART_RESTARTBLOCK
-		    && regs->ARM_pc == restart_addr)
-			set_thread_flag(TIF_SYSCALL_RESTARTSYS);
+		    && regs->ARM_pc == continue_addr) {
+			if (thumb_mode(regs)) {
+				regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
+				regs->ARM_pc -= 2;
+			} else {
+#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
+				regs->ARM_r7 = __NR_restart_syscall;
+				regs->ARM_pc -= 4;
+#else
+				u32 __user *usp;
+
+				regs->ARM_sp -= 4;
+				usp = (u32 __user *)regs->ARM_sp;
+
+				if (put_user(regs->ARM_pc, usp) == 0) {
+					regs->ARM_pc = KERN_RESTART_CODE;
+				} else {
+					regs->ARM_sp += 4;
+					force_sigsegv(0, current);
+				}
+#endif
+			}
+		}
 	}
 
 	restore_saved_sigmask();
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
index 5ff067b7..6fcfe83 100644
--- a/arch/arm/kernel/signal.h
+++ b/arch/arm/kernel/signal.h
@@ -8,5 +8,7 @@
  * published by the Free Software Foundation.
  */
 #define KERN_SIGRETURN_CODE	(CONFIG_VECTORS_BASE + 0x00000500)
+#define KERN_RESTART_CODE	(KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
 
 extern const unsigned long sigreturn_codes[7];
+extern const unsigned long syscall_restart_code[2];
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 4928d89..3647170 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -820,6 +820,8 @@
 	 */
 	memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
 	       sigreturn_codes, sizeof(sigreturn_codes));
+	memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
+	       syscall_restart_code, sizeof(syscall_restart_code));
 
 	flush_icache_range(vectors, vectors + PAGE_SIZE);
 	modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 43a31fb..36ff15b 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -183,7 +183,9 @@
 	}
 #endif
 
+#ifdef CONFIG_SMP
 	PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
 
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index 226949d..f953bb5 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -50,5 +50,6 @@
 #define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE | 0x011c)
 
 #define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE         (BRIDGE_PHYS_BASE | 0x0300)
 
 #endif
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index ad1165d..d52b0ef 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -78,6 +78,7 @@
 
 /* North-South Bridge */
 #define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x20000)
 
 /* Cryptographic Engine */
 #define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x30000)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 573be57..6f6d13f 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -212,7 +212,7 @@
 	select EXYNOS_DEV_SYSMMU
 	select EXYNOS4_DEV_AHCI
 	select SAMSUNG_DEV_KEYPAD
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select SAMSUNG_DEV_PWM
 	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_SETUP_FIMD0
@@ -264,7 +264,7 @@
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
 	select EXYNOS_DEV_SYSMMU
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select EXYNOS_DEV_DRM
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
@@ -303,7 +303,7 @@
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
 	select S5P_SETUP_MIPIPHY
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select EXYNOS_DEV_DRM
 	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
@@ -341,7 +341,7 @@
 	select SAMSUNG_DEV_PWM
 	select EXYNOS_DEV_DRM
 	select EXYNOS_DEV_SYSMMU
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index f8437dd2..3ec8bdd 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -1,4 +1,8 @@
-obj-y					:= clock.o highbank.o system.o
+obj-y					:= highbank.o system.o smc.o
+
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)
+
 obj-$(CONFIG_DEBUG_HIGHBANK_UART)	+= lluart.o
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-highbank/clock.c b/arch/arm/mach-highbank/clock.c
deleted file mode 100644
index c25a2ae..0000000
--- a/arch/arm/mach-highbank/clock.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-
-struct clk {
-	unsigned long rate;
-};
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-
-void clk_disable(struct clk *clk)
-{}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	return 0;
-}
-
-static struct clk eclk = { .rate = 200000000 };
-static struct clk pclk = { .rate = 150000000 };
-
-static struct clk_lookup lookups[] = {
-	{ .clk = &pclk, .con_id = "apb_pclk", },
-	{ .clk = &pclk, .dev_id = "sp804", },
-	{ .clk = &eclk, .dev_id = "ffe0e000.sdhci", },
-	{ .clk = &pclk, .dev_id = "fff36000.serial", },
-};
-
-void __init highbank_clocks_init(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index d8e2d0b..141ed51 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -8,3 +8,4 @@
 static inline void highbank_lluart_map_io(void) {}
 #endif
 
+extern void highbank_smc1(int fn, int arg);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 410a112..d75b0a78 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -85,12 +85,31 @@
 	{}
 };
 
+#ifdef CONFIG_CACHE_L2X0
+static void highbank_l2x0_disable(void)
+{
+	/* Disable PL310 L2 Cache controller */
+	highbank_smc1(0x102, 0x0);
+}
+#endif
+
 static void __init highbank_init_irq(void)
 {
 	of_irq_init(irq_match);
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Enable PL310 L2 Cache controller */
+	highbank_smc1(0x102, 0x1);
 	l2x0_of_init(0, ~0UL);
+	outer_cache.disable = highbank_l2x0_disable;
+#endif
 }
 
+static struct clk_lookup lookup = {
+	.dev_id = "sp804",
+	.con_id = NULL,
+};
+
 static void __init highbank_timer_init(void)
 {
 	int irq;
@@ -108,6 +127,8 @@
 	irq = irq_of_parse_and_map(np, 0);
 
 	highbank_clocks_init();
+	lookup.clk = of_clk_get(np, 0);
+	clkdev_add(&lookup);
 
 	sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
 	sp804_clockevents_init(timer_base, irq, "timer0");
diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S
new file mode 100644
index 0000000..407d17b
--- /dev/null
+++ b/arch/arm/mach-highbank/smc.S
@@ -0,0 +1,27 @@
+/*
+ * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright 2012 Calxeda, Inc.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * This is common routine to manage secure monitor API
+ * used to modify the PL310 secure registers.
+ * 'r0' contains the value to be modified and 'r12' contains
+ * the monitor API number.
+ * Function signature : void highbank_smc1(u32 fn, u32 arg)
+ */
+
+ENTRY(highbank_smc1)
+	stmfd   sp!, {r4-r11, lr}
+	mov	r12, r0
+	mov 	r0, r1
+	dsb
+	smc	#0
+	ldmfd   sp!, {r4-r11, pc}
+ENDPROC(highbank_smc1)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0021f72..eff4db5 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -477,6 +477,7 @@
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index 0f0beb5..516ddee 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -108,8 +108,7 @@
 	clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
 	clk_register_clkdev(clk[clko], "clko", NULL);
 
-	mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
-			MX1_TIM1_INT);
+	mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index 4e4f384..ea13e61 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -180,7 +180,7 @@
 	clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
 	clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
 
-	mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
-			MX21_INT_GPT1);
+	mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
+
 	return 0;
 }
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index d9833bb..fdd8cc8 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -243,6 +243,6 @@
 	clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
 	clk_register_clkdev(clk[iim_ipg], "iim", NULL);
 
-	mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+	mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 	return 0;
 }
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 50a7ebd..295cbd7 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -263,8 +263,7 @@
 	clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
 
-	mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
-			MX27_INT_GPT1);
+	mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
 
 	clk_prepare_enable(clk[emi_ahb_gate]);
 
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index a854b9c..c9a06d8 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -175,8 +175,7 @@
 	mx31_revision();
 	clk_disable_unprepare(clk[iim_gate]);
 
-	mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
-			MX31_INT_GPT);
+	mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index a9e60bf..c6422fb 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -201,7 +201,6 @@
 			pr_err("i.MX35 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clk[i]));
 
-
 	clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
 	clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
 	clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
@@ -264,14 +263,20 @@
 	clk_prepare_enable(clk[iim_gate]);
 	clk_prepare_enable(clk[emi_gate]);
 
+	/*
+	 * SCC is needed to boot via mmc after a watchdog reset. The clock code
+	 * before conversion to common clk also enabled UART1 (which isn't
+	 * handled here and not needed for mmc) and IIM (which is enabled
+	 * unconditionally above).
+	 */
+	clk_prepare_enable(clk[scc_gate]);
+
 	imx_print_silicon_rev("i.MX35", mx35_revision());
 
 #ifdef CONFIG_MXC_USE_EPIT
-	epit_timer_init(&epit1_clk,
-			MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+	epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
 #else
-	mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR),
-			MX35_INT_GPT);
+	mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
 #endif
 
 	return 0;
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index fcd94f3..a2200c7 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -104,12 +104,12 @@
 				periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
 	clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
 				main_bus_sel, ARRAY_SIZE(main_bus_sel));
-	clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1,
+	clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
 				per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
 	clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
 	clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
 	clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
-	clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0,
+	clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1,
 				per_root_sel, ARRAY_SIZE(per_root_sel));
 	clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
 	clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
@@ -172,7 +172,7 @@
 	clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12);
 	clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
 	clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16);
-	clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18);
+	clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18);
 	clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
 	clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
 	clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
@@ -366,8 +366,7 @@
 	clk_set_rate(clk[esdhc_b_podf], 166250000);
 
 	/* System timer */
-	mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
-		MX51_INT_GPT);
+	mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
 
 	clk_prepare_enable(clk[iim_gate]);
 	imx_print_silicon_rev("i.MX51", mx51_revision());
@@ -452,8 +451,7 @@
 	clk_set_rate(clk[esdhc_b_podf], 200000000);
 
 	/* System timer */
-	mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
-		MX53_INT_GPT);
+	mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
 
 	clk_prepare_enable(clk[iim_gate]);
 	imx_print_silicon_rev("i.MX53", mx53_revision());
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index cab02d0..e1a17ac 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -122,10 +122,6 @@
 				    "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
 				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
 
-static const char * const clks_init_on[] __initconst = {
-	"mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3",
-};
-
 enum mx6q_clks {
 	dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
 	pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
@@ -156,16 +152,20 @@
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
-	ssi2_ipg, ssi3_ipg, clk_max
+	ssi2_ipg, ssi3_ipg, rom,
+	clk_max
 };
 
 static struct clk *clk[clk_max];
 
+static enum mx6q_clks const clks_init_on[] __initconst = {
+	mmdc_ch0_axi, rom,
+};
+
 int __init mx6q_clocks_init(void)
 {
 	struct device_node *np;
 	void __iomem *base;
-	struct clk *c;
 	int i, irq;
 
 	clk[dummy] = imx_clk_fixed("dummy", 0);
@@ -365,6 +365,7 @@
 	clk[gpmi_bch]     = imx_clk_gate2("gpmi_bch",      "usdhc4",            base + 0x78, 26);
 	clk[gpmi_io]      = imx_clk_gate2("gpmi_io",       "enfc",              base + 0x78, 28);
 	clk[gpmi_apb]     = imx_clk_gate2("gpmi_apb",      "usdhc3",            base + 0x78, 30);
+	clk[rom]          = imx_clk_gate2("rom",           "ahb",               base + 0x7c, 0);
 	clk[sata]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
 	clk[sdma]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
 	clk[spba]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
@@ -424,21 +425,14 @@
 	clk_register_clkdev(clk[ahb], "ahb", NULL);
 	clk_register_clkdev(clk[cko1], "cko1", NULL);
 
-	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
-		c = clk_get_sys(clks_init_on[i], NULL);
-		if (IS_ERR(c)) {
-			pr_err("%s: failed to get clk %s", __func__,
-			       clks_init_on[i]);
-			return PTR_ERR(c);
-		}
-		clk_prepare_enable(c);
-	}
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+		clk_prepare_enable(clk[clks_init_on[i]]);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
 	irq = irq_of_parse_and_map(np, 0);
-	mxc_timer_init(NULL, base, irq);
+	mxc_timer_init(base, irq);
 
 	return 0;
 }
diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c
index 4685919..0440379 100644
--- a/arch/arm/mach-imx/clk-pllv2.c
+++ b/arch/arm/mach-imx/clk-pllv2.c
@@ -74,30 +74,15 @@
 	void __iomem	*base;
 };
 
-static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
-		unsigned long parent_rate)
+static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
+		u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
 {
 	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
-	unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
-	void __iomem *pllbase;
+	unsigned long dbl;
 	s64 temp;
-	struct clk_pllv2 *pll = to_clk_pllv2(hw);
 
-	pllbase = pll->base;
-
-	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
 	dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
 
-	if (pll_hfsm == 0) {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
-	} else {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
-	}
 	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
 	mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
 	mfi = (mfi <= 5) ? 5 : mfi;
@@ -123,18 +108,30 @@
 	return temp;
 }
 
-static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
-	struct clk_pllv2 *pll = to_clk_pllv2(hw);
-	u32 reg;
+	u32 dp_op, dp_mfd, dp_mfn, dp_ctl;
 	void __iomem *pllbase;
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+	pllbase = pll->base;
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+	dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+	dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+
+	return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn);
+}
+
+static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate,
+		u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn)
+{
+	u32 reg;
 	long mfi, pdf, mfn, mfd = 999999;
 	s64 temp64;
 	unsigned long quad_parent_rate;
-	unsigned long pll_hfsm, dp_ctl;
-
-	pllbase = pll->base;
 
 	quad_parent_rate = 4 * parent_rate;
 	pdf = mfi = -1;
@@ -144,25 +141,41 @@
 		return -EINVAL;
 	pdf--;
 
-	temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
-	do_div(temp64, quad_parent_rate/1000000);
+	temp64 = rate * (pdf + 1) - quad_parent_rate * mfi;
+	do_div(temp64, quad_parent_rate / 1000000);
 	mfn = (long)temp64;
 
+	reg = mfi << 4 | pdf;
+
+	*dp_op = reg;
+	*dp_mfd = mfd;
+	*dp_mfn = mfn;
+
+	return 0;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+	void __iomem *pllbase;
+	u32 dp_ctl, dp_op, dp_mfd, dp_mfn;
+	int ret;
+
+	pllbase = pll->base;
+
+
+	ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn);
+	if (ret)
+		return ret;
+
 	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
 	/* use dpdck0_2 */
 	__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
-	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
-	if (pll_hfsm == 0) {
-		reg = mfi << 4 | pdf;
-		__raw_writel(reg, pllbase + MXC_PLL_DP_OP);
-		__raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
-		__raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
-	} else {
-		reg = mfi << 4 | pdf;
-		__raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
-		__raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
-		__raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
-	}
+
+	__raw_writel(dp_op, pllbase + MXC_PLL_DP_OP);
+	__raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD);
+	__raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN);
 
 	return 0;
 }
@@ -170,7 +183,11 @@
 static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
 		unsigned long *prate)
 {
-	return rate;
+	u32 dp_op, dp_mfd, dp_mfn;
+
+	__clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
+	return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
+			dp_op, dp_mfd, dp_mfn);
 }
 
 static int clk_pllv2_prepare(struct clk_hw *hw)
diff --git a/arch/arm/mach-imx/crm-regs-imx5.h b/arch/arm/mach-imx/crm-regs-imx5.h
index 5e11ba7..5e3f1f0 100644
--- a/arch/arm/mach-imx/crm-regs-imx5.h
+++ b/arch/arm/mach-imx/crm-regs-imx5.h
@@ -23,7 +23,7 @@
 #define MX53_DPLL1_BASE		MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
 #define MX53_DPLL2_BASE		MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
 #define MX53_DPLL3_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
 
 /* PLL Register Offsets */
 #define MXC_PLL_DP_CTL			0x00
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 89493ab..20ed2d5 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -12,6 +12,7 @@
 
 #include <linux/errno.h>
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 #include <mach/common.h>
 
 int platform_cpu_kill(unsigned int cpu)
@@ -19,6 +20,44 @@
 	return 1;
 }
 
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+		"mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, %3\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+		"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  : "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -26,9 +65,10 @@
  */
 void platform_cpu_die(unsigned int cpu)
 {
-	flush_cache_all();
+	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
 	cpu_do_idle();
+	cpu_leave_lowpower();
 
 	/* We should never return from idle */
 	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index c515f8e..6450303 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -70,7 +70,6 @@
 		I2C_BOARD_INFO("pcf8563", 0x51),
 	}, {
 		I2C_BOARD_INFO("tsc2007", 0x48),
-		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
 		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
 	},
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index ac50f16..1e09de5 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -142,7 +142,6 @@
 		I2C_BOARD_INFO("pcf8563", 0x51),
 	}, {
 		I2C_BOARD_INFO("tsc2007", 0x49),
-		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
 	},
 };
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index dff82eb..ba09552 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -38,7 +38,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/system.h>
+#include <asm/system_info.h>
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
 
@@ -116,6 +116,8 @@
 	PB23_PF_USB_PWR,
 	PB24_PF_USB_OC,
 	/* CSI */
+	TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
+	TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
 	PB10_PF_CSI_D0,
 	PB11_PF_CSI_D1,
 	PB12_PF_CSI_D2,
@@ -147,6 +149,24 @@
 	{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
 };
 
+static const struct gpio visstrim_m10_gpios[] __initconst = {
+	{
+		.gpio = TVP5150_RSTN,
+		.flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
+		.label = "tvp5150_rstn",
+	},
+	{
+		.gpio = TVP5150_PWDN,
+		.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+		.label = "tvp5150_pwdn",
+	},
+	{
+		.gpio = OTG_PHY_CS_GPIO,
+		.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+		.label = "usbotg_cs",
+	},
+};
+
 /* Camera */
 static int visstrim_camera_power(struct device *dev, int on)
 {
@@ -190,13 +210,6 @@
 	struct platform_device *pdev;
 	int dma;
 
-	/* Initialize tvp5150 gpios */
-	mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT);
-	gpio_set_value(TVP5150_RSTN, 1);
-	gpio_set_value(TVP5150_PWDN, 0);
-	ndelay(1);
-
 	gpio_set_value(TVP5150_PWDN, 1);
 	ndelay(1);
 	gpio_set_value(TVP5150_RSTN, 0);
@@ -377,10 +390,6 @@
 /* USB OTG */
 static int otg_phy_init(struct platform_device *pdev)
 {
-	gpio_set_value(OTG_PHY_CS_GPIO, 0);
-
-	mdelay(10);
-
 	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 }
 
@@ -435,6 +444,11 @@
 	if (ret)
 		pr_err("Failed to setup pins (%d)\n", ret);
 
+	ret = gpio_request_array(visstrim_m10_gpios,
+				ARRAY_SIZE(visstrim_m10_gpios));
+	if (ret)
+		pr_err("Failed to request gpios (%d)\n", ret);
+
 	imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
 	imx27_add_imx_uart0(&uart_pdata);
 
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index d14bbe9..3e7401f 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -32,7 +32,7 @@
  * Memory-mapped I/O on MX21ADS base board
  */
 #define MX21ADS_MMIO_BASE_ADDR   0xf5000000
-#define MX21ADS_MMIO_SIZE        SZ_16M
+#define MX21ADS_MMIO_SIZE        0xc00000
 
 #define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
 		(MX21ADS_MMIO_BASE_ADDR + (offset))
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 967ed5b..a8983b9 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -86,6 +86,7 @@
 
 void __init imx3_init_l2x0(void)
 {
+#ifdef CONFIG_CACHE_L2X0
 	void __iomem *l2x0_base;
 	void __iomem *clkctl_base;
 
@@ -115,6 +116,7 @@
 	}
 
 	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+#endif
 }
 
 #ifdef CONFIG_SOC_IMX31
@@ -179,6 +181,8 @@
 	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
 	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
 
+	pinctrl_provide_dummies();
+
 	if (to_version == 1) {
 		strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
 			strlen(imx31_sdma_pdata.fw_name));
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index feeee17..1d00305 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -202,6 +202,8 @@
 	mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
 	mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
 
+	pinctrl_provide_dummies();
+
 	/* i.mx51 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
 
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index eaf6c63..ebf680b 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -21,7 +21,6 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 #include <linux/io.h>
-#include <linux/clkdev.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -41,17 +40,17 @@
 #define KMI0_IRQ		{ IRQ_KMIINT0 }
 #define KMI1_IRQ		{ IRQ_KMIINT1 }
 
-static AMBA_APB_DEVICE(rtc, "mb:15", 0,
+static AMBA_APB_DEVICE(rtc, "rtc", 0,
 	INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
 
-static AMBA_APB_DEVICE(uart0, "mb:16", 0,
+static AMBA_APB_DEVICE(uart0, "uart0", 0,
 	INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
 
-static AMBA_APB_DEVICE(uart1, "mb:17", 0,
+static AMBA_APB_DEVICE(uart1, "uart1", 0,
 	INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
 
-static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
-static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&rtc_device,
@@ -61,50 +60,6 @@
 	&kmi1_device,
 };
 
-/*
- * These are fixed clocks.
- */
-static struct clk clk24mhz = {
-	.rate	= 24000000,
-};
-
-static struct clk uartclk = {
-	.rate	= 14745600,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
-	{	/* Bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {
-		/* Integrator/AP timer frequency */
-		.dev_id		= "ap_timer",
-		.clk		= &clk24mhz,
-	}, {	/* UART0 */
-		.dev_id		= "mb:16",
-		.clk		= &uartclk,
-	}, {	/* UART1 */
-		.dev_id		= "mb:17",
-		.clk		= &uartclk,
-	}, {	/* KMI0 */
-		.dev_id		= "mb:18",
-		.clk		= &clk24mhz,
-	}, {	/* KMI1 */
-		.dev_id		= "mb:19",
-		.clk		= &clk24mhz,
-	}, {	/* MMCI - IntegratorCP */
-		.dev_id		= "mb:1c",
-		.clk		= &uartclk,
-	}
-};
-
-void __init integrator_init_early(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
-
 static int __init integrator_init(void)
 {
 	int i;
diff --git a/arch/arm/mach-integrator/include/mach/clkdev.h b/arch/arm/mach-integrator/include/mach/clkdev.h
deleted file mode 100644
index bfe0767..0000000
--- a/arch/arm/mach-integrator/include/mach/clkdev.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <linux/module.h>
-#include <plat/clock.h>
-
-struct clk {
-	unsigned long		rate;
-	const struct clk_ops	*ops;
-	struct module		*owner;
-	const struct icst_params *params;
-	void __iomem		*vcoreg;
-	void			*data;
-};
-
-static inline int __clk_get(struct clk *clk)
-{
-	return try_module_get(clk->owner);
-}
-
-static inline void __clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index c857501..7b1055c 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -33,6 +33,7 @@
 #include <linux/io.h>
 #include <linux/mtd/physmap.h>
 #include <linux/clk.h>
+#include <linux/platform_data/clk-integrator.h>
 #include <video/vga.h>
 
 #include <mach/hardware.h>
@@ -174,6 +175,7 @@
 
 	fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
 		-1, INTEGRATOR_SC_VALID_INT, NULL);
+	integrator_clk_init(false);
 }
 
 #ifdef CONFIG_PM
@@ -440,6 +442,10 @@
 					0xffffU);
 }
 
+void __init ap_init_early(void)
+{
+}
+
 /*
  * Set up timer(s).
  */
@@ -471,7 +477,7 @@
 	.reserve	= integrator_reserve,
 	.map_io		= ap_map_io,
 	.nr_irqs	= NR_IRQS_INTEGRATOR_AP,
-	.init_early	= integrator_init_early,
+	.init_early	= ap_init_early,
 	.init_irq	= ap_init_irq,
 	.handle_irq	= fpga_handle_irq,
 	.timer		= &ap_timer,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a56c536..82d5c83 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -21,8 +21,8 @@
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
 #include <linux/gfp.h>
-#include <linux/clkdev.h>
 #include <linux/mtd/physmap.h>
+#include <linux/platform_data/clk-integrator.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -171,65 +171,10 @@
 
 	fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
 		      IRQ_CP_CPPLDINT, sic_mask, NULL);
+	integrator_clk_init(true);
 }
 
 /*
- * Clock handling
- */
-#define CM_LOCK		(__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
-#define CM_AUXOSC	(__io_address(INTEGRATOR_HDR_BASE)+0x1c)
-
-static const struct icst_params cp_auxvco_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min 	= 8,
-	.vd_max 	= 263,
-	.rd_min 	= 3,
-	.rd_max 	= 65,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-static void cp_auxvco_set(struct clk *clk, struct icst_vco vco)
-{
-	u32 val;
-
-	val = readl(clk->vcoreg) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, CM_LOCK);
-	writel(val, clk->vcoreg);
-	writel(0, CM_LOCK);
-}
-
-static const struct clk_ops cp_auxclk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= cp_auxvco_set,
-};
-
-static struct clk cp_auxclk = {
-	.ops	= &cp_auxclk_ops,
-	.params	= &cp_auxvco_params,
-	.vcoreg	= CM_AUXOSC,
-};
-
-static struct clk sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk_lookup cp_lookups[] = {
-	{	/* CLCD */
-		.dev_id		= "mb:c0",
-		.clk		= &cp_auxclk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.clk		= &sp804_clk,
-	},
-};
-
-/*
  * Flash handling.
  */
 static int intcp_flash_init(struct platform_device *dev)
@@ -336,10 +281,10 @@
 #define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
 #define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
 
-static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
+static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
 	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
 
-static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
+static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
 	INTEGRATOR_CP_AACI_IRQS, NULL);
 
 
@@ -393,7 +338,7 @@
 	.remove		= versatile_clcd_remove_dma,
 };
 
-static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
+static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
 	{ IRQ_CP_CLCDCINT }, &clcd_data);
 
 static struct amba_device *amba_devs[] __initdata = {
@@ -406,10 +351,6 @@
 
 static void __init intcp_init_early(void)
 {
-	clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups));
-
-	integrator_init_early();
-
 #ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK
 	versatile_sched_clock_init(REFCOUNTER, 24000000);
 #endif
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index 2222c57..b0d3cc4 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -20,9 +20,6 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 25fb3fd..f261cd2 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -159,6 +159,7 @@
 	gate_fn->gate.flags = clk_gate_flags;
 	gate_fn->gate.lock = lock;
 	gate_fn->gate.hw.init = &init;
+	gate_fn->fn = fn;
 
 	/* ops is the gate ops, but with our disable function */
 	if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {
@@ -193,9 +194,11 @@
 				    bit_idx, 0, &gating_lock, fn);
 }
 
+static struct clk *ge0, *ge1;
+
 void __init kirkwood_clk_init(void)
 {
-	struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
+	struct clk *runit, *sata0, *sata1, *usb0, *sdio;
 	struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
 
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
@@ -257,6 +260,9 @@
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
 			IRQ_KIRKWOOD_GE00_ERR);
+	/* The interface forgets the MAC address assigned by u-boot if
+	the clock is turned off, so claim the clk now. */
+	clk_prepare_enable(ge0);
 }
 
 
@@ -268,6 +274,7 @@
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
 			IRQ_KIRKWOOD_GE01_ERR);
+	clk_prepare_enable(ge1);
 }
 
 
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 3eee37a..a115142 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -38,6 +38,7 @@
 #define IRQ_MASK_HIGH_OFF	0x0014
 
 #define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
 
 #define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
 #define L2_WRITETHROUGH		0x00000010
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index fede3d5..c5b6851 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -80,6 +80,7 @@
 #define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
 
 #define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x20000)
 
 #define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x30000)
 
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
deleted file mode 100644
index 0e135a5..0000000
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_GPIO_PXA_H
-#define __ASM_MACH_GPIO_PXA_H
-
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-
-#define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-#define gpio_to_bank(gpio)	((gpio) >> 5)
-
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio)	(1 << ((gpio) & 0x1f))
-
-#define GPLR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
-#include <plat/gpio-pxa.h>
-
-#endif /* __ASM_MACH_GPIO_PXA_H */
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
index fcfe0e3..e60c7d9 100644
--- a/arch/arm/mach-mmp/irq.c
+++ b/arch/arm/mach-mmp/irq.c
@@ -241,6 +241,7 @@
 	icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
 	icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
 	icu_data[1].nr_irqs = 2;
+	icu_data[1].cascade_irq = 4;
 	icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
 	icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
 						   icu_data[1].virq_base, 0,
@@ -249,6 +250,7 @@
 	icu_data[2].reg_status = mmp_icu_base + 0x154;
 	icu_data[2].reg_mask = mmp_icu_base + 0x16c;
 	icu_data[2].nr_irqs = 2;
+	icu_data[2].cascade_irq = 5;
 	icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
 	icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
 						   icu_data[2].virq_base, 0,
@@ -257,6 +259,7 @@
 	icu_data[3].reg_status = mmp_icu_base + 0x180;
 	icu_data[3].reg_mask = mmp_icu_base + 0x17c;
 	icu_data[3].nr_irqs = 3;
+	icu_data[3].cascade_irq = 9;
 	icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
 	icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
 						   icu_data[3].virq_base, 0,
@@ -265,6 +268,7 @@
 	icu_data[4].reg_status = mmp_icu_base + 0x158;
 	icu_data[4].reg_mask = mmp_icu_base + 0x170;
 	icu_data[4].nr_irqs = 5;
+	icu_data[4].cascade_irq = 17;
 	icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
 	icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
 						   icu_data[4].virq_base, 0,
@@ -273,6 +277,7 @@
 	icu_data[5].reg_status = mmp_icu_base + 0x15c;
 	icu_data[5].reg_mask = mmp_icu_base + 0x174;
 	icu_data[5].nr_irqs = 15;
+	icu_data[5].cascade_irq = 35;
 	icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
 	icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
 						   icu_data[5].virq_base, 0,
@@ -281,6 +286,7 @@
 	icu_data[6].reg_status = mmp_icu_base + 0x160;
 	icu_data[6].reg_mask = mmp_icu_base + 0x178;
 	icu_data[6].nr_irqs = 2;
+	icu_data[6].cascade_irq = 51;
 	icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
 	icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
 						   icu_data[6].virq_base, 0,
@@ -289,6 +295,7 @@
 	icu_data[7].reg_status = mmp_icu_base + 0x188;
 	icu_data[7].reg_mask = mmp_icu_base + 0x184;
 	icu_data[7].nr_irqs = 2;
+	icu_data[7].cascade_irq = 55;
 	icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
 	icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
 						   icu_data[7].virq_base, 0,
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
index c64dbb9..eb187e0 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -31,5 +31,6 @@
 #define IRQ_MASK_HIGH_OFF	0x0014
 
 #define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
 
 #endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 3674497..e807c4c 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -42,6 +42,7 @@
 #define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
 #define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
 #define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
+#define MV78XX0_CORE_REGS_PHYS_BASE	0xfe400000
 #define MV78XX0_CORE_REGS_SIZE		SZ_16K
 
 #define MV78XX0_PCIE_IO_PHYS_BASE(i)	(0xf0800000 + ((i) << 20))
@@ -59,6 +60,7 @@
  * Core-specific peripheral registers.
  */
 #define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
+#define BRIDGE_PHYS_BASE	(MV78XX0_CORE_REGS_PHYS_BASE)
 
 /*
  * Register Map
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
index 5e90b9d..f5f0617 100644
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ b/arch/arm/mach-mxs/mach-apx4devkit.c
@@ -205,6 +205,16 @@
 	return 0;
 }
 
+static void __init apx4devkit_fec_phy_clk_enable(void)
+{
+	struct clk *clk;
+
+	/* Enable fec phy clock */
+	clk = clk_get_sys("enet_out", NULL);
+	if (!IS_ERR(clk))
+		clk_prepare_enable(clk);
+}
+
 static void __init apx4devkit_init(void)
 {
 	mx28_soc_init();
@@ -225,6 +235,7 @@
 	phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
 			apx4devkit_phy_fixup);
 
+	apx4devkit_fec_phy_clk_enable();
 	mx28_add_fec(0, &mx28_fec_pdata);
 
 	mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 70a81f90..53c39d2 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -97,11 +97,6 @@
 
 	gpmc_onenand_init(&board_onenand_data);
 }
-#else
-void
-__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
-}
 #endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
 
 #if defined(CONFIG_MTD_NAND_OMAP2) || \
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 8ca14e8..2c5d0ed 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -83,11 +83,9 @@
 };
 
 static struct musb_hdrc_platform_data tusb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
-	.mode		= MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
+#else
 	.mode		= MUSB_HOST,
 #endif
 	.set_power	= tusb_set_power,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 79c6909..580fd17 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -81,13 +81,13 @@
 static struct {
 	int mmc1_gpio_wp;
 	int usb_pwr_level;
-	int reset_gpio;
+	int dvi_pd_gpio;
 	int usr_button_gpio;
 	int mmc_caps;
 } beagle_config = {
 	.mmc1_gpio_wp = -EINVAL,
 	.usb_pwr_level = GPIOF_OUT_INIT_LOW,
-	.reset_gpio = 129,
+	.dvi_pd_gpio = -EINVAL,
 	.usr_button_gpio = 4,
 	.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 };
@@ -126,21 +126,21 @@
 		printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
 		beagle_config.mmc1_gpio_wp = 29;
-		beagle_config.reset_gpio = 170;
+		beagle_config.dvi_pd_gpio = 170;
 		beagle_config.usr_button_gpio = 7;
 		break;
 	case 6:
 		printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
 		beagle_config.mmc1_gpio_wp = 23;
-		beagle_config.reset_gpio = 170;
+		beagle_config.dvi_pd_gpio = 170;
 		beagle_config.usr_button_gpio = 7;
 		break;
 	case 5:
 		printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
 		beagle_config.mmc1_gpio_wp = 23;
-		beagle_config.reset_gpio = 170;
+		beagle_config.dvi_pd_gpio = 170;
 		beagle_config.usr_button_gpio = 7;
 		break;
 	case 0:
@@ -274,11 +274,9 @@
 		if (r)
 			pr_err("%s: unable to configure nDVI_PWR_EN\n",
 				__func__);
-		r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
-				     "DVI_LDO_EN");
-		if (r)
-			pr_err("%s: unable to configure DVI_LDO_EN\n",
-				__func__);
+
+		beagle_config.dvi_pd_gpio = gpio + 2;
+
 	} else {
 		/*
 		 * REVISIT: need ehci-omap hooks for external VBUS
@@ -287,7 +285,7 @@
 		if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
 			pr_err("%s: unable to configure EHCI_nOC\n", __func__);
 	}
-	dvi_panel.power_down_gpio = beagle_config.reset_gpio;
+	dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
 
 	gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
 			"nEN_USB_PWR");
@@ -499,7 +497,7 @@
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3_beagle_init_rev();
 
-	if (beagle_config.mmc1_gpio_wp != -EINVAL)
+	if (gpio_is_valid(beagle_config.mmc1_gpio_wp))
 		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
 	mmc[0].caps = beagle_config.mmc_caps;
 	omap_hsmmc_init(mmc);
@@ -510,15 +508,13 @@
 
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
+	if (gpio_is_valid(beagle_config.dvi_pd_gpio))
+		omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
 	omap_display_init(&beagle_dss_data);
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
 
-	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
-	/* REVISIT leave DVI powered down until it's needed ... */
-	gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
-
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 8fa2fc3..779734d 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -494,8 +494,8 @@
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_hsmmc_init(mmc);
 	overo_i2c_init();
+	omap_hsmmc_init(mmc);
 	omap_display_init(&overo_dss_data);
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ff53dec..df2534d 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -144,7 +144,6 @@
 	.release_resources = lis302_release,
 	.st_min_limits = {-32, 3, 3},
 	.st_max_limits = {-3, 32, 32},
-	.irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO),
 };
 #endif
 
@@ -1030,7 +1029,6 @@
 	{
 		I2C_BOARD_INFO("lis3lv02d", 0x1d),
 		.platform_data = &rx51_lis3lv02d_data,
-		.irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO),
 	},
 #endif
 };
@@ -1056,6 +1054,10 @@
 	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
+#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
+	rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO);
+	rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO);
+#endif
 	omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
 	return 0;
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 4e1a3b0..1efdec2 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3514,7 +3514,7 @@
 	struct omap_clk *c;
 	u32 cpu_clkflg = 0;
 
-	if (cpu_is_omap3517()) {
+	if (soc_is_am35xx()) {
 		cpu_mask = RATE_IN_34XX;
 		cpu_clkflg = CK_AM35XX;
 	} else if (cpu_is_omap3630()) {
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 2172f66..ba6f9a0 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -84,6 +84,7 @@
 
 static struct clk sys_32k_ck = {
 	.name		= "sys_32k_ck",
+	.clkdm_name	= "prm_clkdm",
 	.rate		= 32768,
 	.ops		= &clkops_null,
 };
@@ -512,6 +513,7 @@
 	.name		= "ddrphy_ck",
 	.parent		= &dpll_core_m2_ck,
 	.ops		= &clkops_null,
+	.clkdm_name	= "l3_emif_clkdm",
 	.fixed_div	= 2,
 	.recalc		= &omap_fixed_divisor_recalc,
 };
@@ -769,6 +771,7 @@
 static struct clk dpll_mpu_m2_ck = {
 	.name		= "dpll_mpu_m2_ck",
 	.parent		= &dpll_mpu_ck,
+	.clkdm_name	= "cm_clkdm",
 	.clksel		= dpll_mpu_m2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_MPU,
 	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
@@ -1149,6 +1152,7 @@
 static struct clk l3_div_ck = {
 	.name		= "l3_div_ck",
 	.parent		= &div_core_ck,
+	.clkdm_name	= "cm_clkdm",
 	.clksel		= l3_div_div,
 	.clksel_reg	= OMAP4430_CM_CLKSEL_CORE,
 	.clksel_mask	= OMAP4430_CLKSEL_L3_MASK,
@@ -2824,6 +2828,7 @@
 static struct clk trace_clk_div_ck = {
 	.name		= "trace_clk_div_ck",
 	.parent		= &pmd_trace_clk_mux_ck,
+	.clkdm_name	= "emu_sys_clkdm",
 	.clksel		= trace_clk_div_div,
 	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
 	.clksel_mask	= OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
@@ -3412,9 +3417,12 @@
 	if (cpu_is_omap443x()) {
 		cpu_mask = RATE_IN_4430;
 		cpu_clkflg = CK_443X;
-	} else if (cpu_is_omap446x()) {
+	} else if (cpu_is_omap446x() || cpu_is_omap447x()) {
 		cpu_mask = RATE_IN_4460 | RATE_IN_4430;
 		cpu_clkflg = CK_446X | CK_443X;
+
+		if (cpu_is_omap447x())
+			pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
 	} else {
 		return 0;
 	}
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index a7bc096..f24e3f7 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -22,4 +22,15 @@
  */
 #define MAX_MODULE_READY_TIME		2000
 
+/*
+ * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
+ * the PRCM to request that a module enter the inactive state in the
+ * case of OMAP2 & 3.  In the case of OMAP4 this is the max duration
+ * in microseconds for the module to reach the inactive state from
+ * a functional state.
+ * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during
+ * kernel init.
+ */
+#define MAX_MODULE_DISABLE_TIME		5000
+
 #endif
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 8c86d29..1a39945 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -313,9 +313,9 @@
 
 	omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
 			   CLKCTRL_IDLEST_DISABLED),
-			  MAX_MODULE_READY_TIME, i);
+			  MAX_MODULE_DISABLE_TIME, i);
 
-	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+	return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 54d49dd..5fb47a1 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -271,9 +271,9 @@
 		goto err;
 	}
 
-	r = omap_device_register(pdev);
+	r = platform_device_add(pdev);
 	if (r) {
-		pr_err("Could not register omap_device for %s\n", pdev_name);
+		pr_err("Could not register platform_device for %s\n", pdev_name);
 		goto err;
 	}
 
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 845309f..88ffa1e 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -20,6 +20,9 @@
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
+
+#include <asm/memblock.h>
+
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
 #ifdef CONFIG_BRIDGE_DVFS
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 0389b32..00486a8 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -247,6 +247,17 @@
 	omap_features |= OMAP3_HAS_SDRC;
 
 	/*
+	 * am35x fixups:
+	 * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as
+	 *   reserved and therefore return 0 when read.  Unfortunately,
+	 *   OMAP3_CHECK_FEATURE() will interpret some of those zeroes to
+	 *   mean that a feature is present even though it isn't so clear
+	 *   the incorrectly set feature bits.
+	 */
+	if (soc_is_am35xx())
+		omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP);
+
+	/*
 	 * TODO: Get additional info (where applicable)
 	 *       e.g. Size of L2 cache.
 	 */
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index fdc4303..6038a8c 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -149,6 +149,7 @@
 	ct->chip.irq_ack = omap_mask_ack_irq;
 	ct->chip.irq_mask = irq_gc_mask_disable_reg;
 	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+	ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE;
 
 	ct->regs.enable = INTC_MIR_CLEAR0;
 	ct->regs.disable = INTC_MIR_SET0;
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 80e55c5..9fe6829 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -41,6 +41,7 @@
 #include "control.h"
 #include "mux.h"
 #include "prm.h"
+#include "common.h"
 
 #define OMAP_MUX_BASE_OFFSET		0x30	/* Offset from CTRL_BASE */
 #define OMAP_MUX_BASE_SZ		0x5ca
@@ -217,8 +218,7 @@
 	return -ENODEV;
 }
 
-static int __init
-omap_mux_get_by_name(const char *muxname,
+int __init omap_mux_get_by_name(const char *muxname,
 			struct omap_mux_partition **found_partition,
 			struct omap_mux **found_mux)
 {
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 69fe060..471e62a7 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -59,6 +59,7 @@
 #define OMAP_PIN_OFF_WAKEUPENABLE	OMAP_WAKEUP_EN
 
 #define OMAP_MODE_GPIO(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+#define OMAP_MODE_UART(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
 
 /* Flags for omapX_mux_init */
 #define OMAP_PACKAGE_MASK		0xffff
@@ -225,8 +226,18 @@
  */
 void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
 
+int omap_mux_get_by_name(const char *muxname,
+		struct omap_mux_partition **found_partition,
+		struct omap_mux **found_mux);
 #else
 
+static inline int omap_mux_get_by_name(const char *muxname,
+		struct omap_mux_partition **found_partition,
+		struct omap_mux **found_mux)
+{
+	return 0;
+}
+
 static inline int omap_mux_init_gpio(int gpio, int val)
 {
 	return 0;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index bf86f7e..7731936 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -530,7 +530,7 @@
 	if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
 		_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
 	if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
-		_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
+		_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v);
 
 	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 950454a..b7bcba5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -393,8 +393,7 @@
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0004,
 	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -854,6 +853,11 @@
 	.name		= "dss_hdmi",
 	.class		= &omap44xx_hdmi_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
+	/*
+	 * HDMI audio requires to use no-idle mode. Hence,
+	 * set idle mode by software.
+	 */
+	.flags		= HWMOD_SWSUP_SIDLE,
 	.mpu_irqs	= omap44xx_dss_hdmi_irqs,
 	.sdma_reqs	= omap44xx_dss_hdmi_sdma_reqs,
 	.main_clk	= "dss_48mhz_clk",
@@ -1924,7 +1928,7 @@
 
 static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = {
 	{ .role = "pad_fck", .clk = "pad_clks_ck" },
-	{ .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" },
+	{ .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" },
 };
 
 static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
@@ -1959,7 +1963,7 @@
 
 static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = {
 	{ .role = "pad_fck", .clk = "pad_clks_ck" },
-	{ .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" },
+	{ .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" },
 };
 
 static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
@@ -1994,7 +1998,7 @@
 
 static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = {
 	{ .role = "pad_fck", .clk = "pad_clks_ck" },
-	{ .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" },
+	{ .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" },
 };
 
 static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
@@ -2029,7 +2033,7 @@
 
 static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = {
 	{ .role = "pad_fck", .clk = "pad_clks_ck" },
-	{ .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" },
+	{ .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" },
 };
 
 static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
@@ -3860,7 +3864,7 @@
 };
 
 /* usb_host_fs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = {
 	.master		= &omap44xx_usb_host_fs_hwmod,
 	.slave		= &omap44xx_l3_main_2_hwmod,
 	.clk		= "l3_div_ck",
@@ -3918,7 +3922,7 @@
 };
 
 /* aess -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = {
 	.master		= &omap44xx_aess_hwmod,
 	.slave		= &omap44xx_l4_abe_hwmod,
 	.clk		= "ocp_abe_iclk",
@@ -4009,7 +4013,7 @@
 };
 
 /* l4_abe -> aess */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_aess_hwmod,
 	.clk		= "ocp_abe_iclk",
@@ -4027,7 +4031,7 @@
 };
 
 /* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_aess_hwmod,
 	.clk		= "ocp_abe_iclk",
@@ -5853,7 +5857,7 @@
 };
 
 /* l4_cfg -> usb_host_fs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
 	.master		= &omap44xx_l4_cfg_hwmod,
 	.slave		= &omap44xx_usb_host_fs_hwmod,
 	.clk		= "l4_div_ck",
@@ -6010,13 +6014,13 @@
 	&omap44xx_iva__l3_main_2,
 	&omap44xx_l3_main_1__l3_main_2,
 	&omap44xx_l4_cfg__l3_main_2,
-	&omap44xx_usb_host_fs__l3_main_2,
+	/* &omap44xx_usb_host_fs__l3_main_2, */
 	&omap44xx_usb_host_hs__l3_main_2,
 	&omap44xx_usb_otg_hs__l3_main_2,
 	&omap44xx_l3_main_1__l3_main_3,
 	&omap44xx_l3_main_2__l3_main_3,
 	&omap44xx_l4_cfg__l3_main_3,
-	&omap44xx_aess__l4_abe,
+	/* &omap44xx_aess__l4_abe, */
 	&omap44xx_dsp__l4_abe,
 	&omap44xx_l3_main_1__l4_abe,
 	&omap44xx_mpu__l4_abe,
@@ -6025,8 +6029,8 @@
 	&omap44xx_l4_cfg__l4_wkup,
 	&omap44xx_mpu__mpu_private,
 	&omap44xx_l4_cfg__ocp_wp_noc,
-	&omap44xx_l4_abe__aess,
-	&omap44xx_l4_abe__aess_dma,
+	/* &omap44xx_l4_abe__aess, */
+	/* &omap44xx_l4_abe__aess_dma, */
 	&omap44xx_l3_main_2__c2c,
 	&omap44xx_l4_wkup__counter_32k,
 	&omap44xx_l4_cfg__ctrl_module_core,
@@ -6132,7 +6136,7 @@
 	&omap44xx_l4_per__uart2,
 	&omap44xx_l4_per__uart3,
 	&omap44xx_l4_per__uart4,
-	&omap44xx_l4_cfg__usb_host_fs,
+	/* &omap44xx_l4_cfg__usb_host_fs, */
 	&omap44xx_l4_cfg__usb_host_hs,
 	&omap44xx_l4_cfg__usb_otg_hs,
 	&omap44xx_l4_cfg__usb_tll_hs,
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
index a05a62f..acc2164 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/arch/arm/mach-omap2/omap_l3_smx.c
@@ -155,10 +155,11 @@
 	u8 multi = error & L3_ERROR_LOG_MULTI;
 	u32 address = omap3_l3_decode_addr(error_addr);
 
-	WARN(true, "%s seen by %s %s at address %x\n",
+	pr_err("%s seen by %s %s at address %x\n",
 			omap3_l3_code_string(code),
 			omap3_l3_initiator_string(initid),
 			multi ? "Multiple Errors" : "", address);
+	WARN_ON(1);
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index 4c90477..d52651a 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -239,21 +239,15 @@
 
 	devconf2 &= ~CONF2_OTGMODE;
 	switch (musb_mode) {
-#ifdef	CONFIG_USB_MUSB_HDRC_HCD
 	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
 		devconf2 |= CONF2_FORCE_HOST;
 		break;
-#endif
-#ifdef	CONFIG_USB_GADGET_MUSB_HDRC
 	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
 		devconf2 |= CONF2_FORCE_DEVICE;
 		break;
-#endif
-#ifdef	CONFIG_USB_MUSB_OTG
 	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
 		devconf2 |= CONF2_NO_OVERRIDE;
 		break;
-#endif
 	default:
 		pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
 	}
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index a34023d..3a595e8 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -724,6 +724,7 @@
 	ret = request_irq(omap_prcm_event_to_irq("io"),
 		_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
 		omap3_pm_init);
+	enable_irq(omap_prcm_event_to_irq("io"));
 
 	if (ret) {
 		pr_err("pm: Failed to request pm_io irq\n");
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 9ce7654..21cb740 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -15,6 +15,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/irq.h>
 
 #include "common.h"
 #include <plat/cpu.h>
@@ -303,8 +304,15 @@
 
 static int __init omap3xxx_prcm_init(void)
 {
-	if (cpu_is_omap34xx())
-		return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
-	return 0;
+	int ret = 0;
+
+	if (cpu_is_omap34xx()) {
+		ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
+		if (!ret)
+			irq_set_status_flags(omap_prcm_event_to_irq("io"),
+					     IRQ_NOAUTOEN);
+	}
+
+	return ret;
 }
 subsys_initcall(omap3xxx_prcm_init);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 292d4aa..c1b93c7 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -57,6 +57,7 @@
 
 	struct list_head node;
 	struct omap_hwmod *oh;
+	struct omap_device_pad default_omap_uart_pads[2];
 };
 
 static LIST_HEAD(uart_list);
@@ -126,11 +127,70 @@
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
+
+#define OMAP_UART_DEFAULT_PAD_NAME_LEN	28
+static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN],
+		tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata;
+
+static void  __init
+omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata,
+				struct omap_uart_state *uart)
 {
+	uart->default_omap_uart_pads[0].name = rx_pad_name;
+	uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX |
+							OMAP_DEVICE_PAD_WAKEUP;
+	uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT |
+							OMAP_MUX_MODE0;
+	uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0;
+	uart->default_omap_uart_pads[1].name = tx_pad_name;
+	uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT |
+							OMAP_MUX_MODE0;
+	bdata->pads = uart->default_omap_uart_pads;
+	bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads);
+}
+
+static void  __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+						struct omap_uart_state *uart)
+{
+	struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL;
+	struct omap_mux *rx_mux = NULL, *tx_mux = NULL;
+	char *rx_fmt, *tx_fmt;
+	int uart_nr = bdata->id + 1;
+
+	if (bdata->id != 2) {
+		rx_fmt = "uart%d_rx.uart%d_rx";
+		tx_fmt = "uart%d_tx.uart%d_tx";
+	} else {
+		rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx";
+		tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx";
+	}
+
+	snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt,
+			uart_nr, uart_nr);
+	snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt,
+			uart_nr, uart_nr);
+
+	if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 &&
+			omap_mux_get_by_name
+				(tx_pad_name, &tx_partition, &tx_mux) >= 0) {
+		u16 tx_mode, rx_mode;
+
+		tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset);
+		rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset);
+
+		/*
+		 * Check if uart is used in default tx/rx mode i.e. in mux mode0
+		 * if yes then configure rx pin for wake up capability
+		 */
+		if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode))
+			omap_serial_fill_uart_tx_rx_pads(bdata, uart);
+	}
 }
 #else
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
+static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+		struct omap_uart_state *uart)
+{
+}
 #endif
 
 static char *cmdline_find_option(char *str)
@@ -287,8 +347,7 @@
 		bdata.pads = NULL;
 		bdata.pads_cnt = 0;
 
-		if (cpu_is_omap44xx() || cpu_is_omap34xx())
-			omap_serial_fill_default_pads(&bdata);
+		omap_serial_check_wakeup(&bdata, uart);
 
 		if (!info)
 			omap_serial_init_port(&bdata, NULL);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 119d5a9..43a9790 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -32,6 +32,7 @@
 #include "twl-common.h"
 #include "pm.h"
 #include "voltage.h"
+#include "mux.h"
 
 static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.addr		= 0x48,
@@ -77,6 +78,7 @@
 		    struct twl6040_platform_data *twl6040_data, int twl6040_irq)
 {
 	/* PMIC part*/
+	omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
 	strncpy(omap4_i2c1_board_info[0].type, pmic_type,
 		sizeof(omap4_i2c1_board_info[0].type));
 	omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index b19d1b4..c4a5768 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -41,12 +41,10 @@
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+#else
 	.mode		= MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_PERIPHERAL,
 #endif
 	/* .clock is set dynamically */
 	.config		= &musb_config,
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index db84a46..805bea6 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -300,7 +300,7 @@
 		printk(error, 3, status);
 		return status;
 	}
-	tusb_resources[2].start = irq + IH_GPIO_BASE;
+	tusb_resources[2].start = gpio_to_irq(irq);
 
 	/* set up memory timings ... can speed them up later */
 	if (!ps_refclk) {
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index 96484bc..11a3c1e 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -35,5 +35,5 @@
 #define MAIN_IRQ_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x204)
 
 #define TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
+#define TIMER_PHYS_BASE		(ORION5X_BRIDGE_PHYS_BASE | 0x300)
 #endif
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
new file mode 100644
index 0000000..1aa5d0a
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/orion5x.h>
+#include <asm/sizes.h>
+
+#define IO_SPACE_LIMIT		SZ_2M
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a)			 __io(a)
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 2745f5d..683e085 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -82,6 +82,7 @@
 #define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
 
 #define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x20000)
 
 #define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
 
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index d09da6a..d3de84b 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -127,7 +127,11 @@
 	GPIO19_SSP2_SCLK,
 	GPIO86_SSP2_RXD,
 	GPIO87_SSP2_TXD,
-	GPIO88_GPIO,
+	GPIO88_GPIO | MFP_LPM_DRIVE_HIGH,	/* TSC2046_CS */
+
+	/* BQ24022 Regulator */
+	GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT,	/* BQ24022_nCHARGE_EN */
+	GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT,	/* BQ24022_ISET2 */
 
 	/* HX4700 specific input GPIOs */
 	GPIO12_GPIO | WAKEUP_ON_EDGE_RISE,	/* ASIC3_IRQ */
@@ -135,6 +139,10 @@
 	GPIO14_GPIO,	/* nWLAN_IRQ */
 
 	/* HX4700 specific output GPIOs */
+	GPIO61_GPIO | MFP_LPM_DRIVE_HIGH,	/* W3220_nRESET */
+	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* ASIC3_nRESET */
+	GPIO81_GPIO | MFP_LPM_DRIVE_HIGH,	/* CPU_GP_nRESET */
+	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* CPU_HW_nRESET */
 	GPIO102_GPIO | MFP_LPM_DRIVE_LOW,	/* SYNAPTICS_POWER_ON */
 
 	GPIO10_GPIO,	/* GSM_IRQ */
@@ -872,14 +880,19 @@
 	{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
 	{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
 	{ GPIO32_HX4700_RS232_ON,         GPIOF_OUT_INIT_HIGH, "RS232_ON" },
+	{ GPIO61_HX4700_W3220_nRESET,     GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
 	{ GPIO71_HX4700_ASIC3_nRESET,     GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
+	{ GPIO81_HX4700_CPU_GP_nRESET,    GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
 	{ GPIO82_HX4700_EUART_RESET,      GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
+	{ GPIO116_HX4700_CPU_HW_nRESET,   GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
 };
 
 static void __init hx4700_init(void)
 {
 	int ret;
 
+	PCFR = PCFR_GPR_EN | PCFR_OPDE;
+
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
 	gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
 	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 9e37026..9bd1355 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -779,6 +779,7 @@
 	.init_irq	= r8a7740_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= eva_init,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 	.dt_compat	= eva_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index 7bc5e7d..6a33cf3 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -80,6 +80,7 @@
 	.init_irq	= emev2_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= kzm9d_add_standard_devices,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 	.dt_compat	= kzm9d_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index d8e33b6..c0ae815 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -455,6 +455,7 @@
 	.init_irq	= sh73a0_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= kzm_init,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 	.dt_compat	= kzm9g_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index b577f7c..150122a 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1512,6 +1512,9 @@
 	gpio_request(GPIO_FN_SDHID0_1, NULL);
 	gpio_request(GPIO_FN_SDHID0_0, NULL);
 
+	/* SDHI0 PORT172 card-detect IRQ26 */
+	gpio_request(GPIO_FN_IRQ26_172, NULL);
+
 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
 	/* enable SDHI1 */
 	gpio_request(GPIO_FN_SDHICMD1, NULL);
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 472d1f5..3946c4b 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -475,9 +475,9 @@
 
 enum { MSTP001,
 	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
-	MSTP219,
+	MSTP219, MSTP218,
 	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-	MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
+	MSTP331, MSTP329, MSTP325, MSTP323,
 	MSTP314, MSTP313, MSTP312, MSTP311,
 	MSTP303, MSTP302, MSTP301, MSTP300,
 	MSTP411, MSTP410, MSTP403,
@@ -497,6 +497,7 @@
 	[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
 	[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
 	[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
+	[MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
 	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
 	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
 	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
@@ -508,7 +509,6 @@
 	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
 	[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
 	[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
-	[MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */
 	[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
@@ -552,6 +552,7 @@
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
 	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
+	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
@@ -563,7 +564,6 @@
 	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
 	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
-	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c
index 550b23d..f04fad4 100644
--- a/arch/arm/mach-shmobile/intc-r8a7779.c
+++ b/arch/arm/mach-shmobile/intc-r8a7779.c
@@ -35,6 +35,9 @@
 #define INT2SMSKCR3 0xfe7822ac
 #define INT2SMSKCR4 0xfe7822b0
 
+#define INT2NTSR0 0xfe700060
+#define INT2NTSR1 0xfe700064
+
 static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
 {
 	return 0; /* always allow wakeup */
@@ -49,6 +52,10 @@
 	gic_init(0, 29, gic_dist_base, gic_cpu_base);
 	gic_arch_extn.irq_set_wake = r8a7779_set_wake;
 
+	/* route all interrupts to ARM */
+	__raw_writel(0xffffffff, INT2NTSR0);
+	__raw_writel(0x3fffffff, INT2NTSR1);
+
 	/* unmask all known interrupts in INTCS2 */
 	__raw_writel(0xfffffff0, INT2SMSKCR0);
 	__raw_writel(0xfff7ffff, INT2SMSKCR1);
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index bacdd66..e859fcd 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -25,7 +25,12 @@
 #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
 			of_machine_is_compatible("renesas,sh73a0"))
 #define is_r8a7779() machine_is_marzen()
+
+#ifdef CONFIG_ARCH_EMEV2
 #define is_emev2() of_machine_is_compatible("renesas,emev2")
+#else
+#define is_emev2() (0)
+#endif
 
 static unsigned int __init shmobile_smp_get_core_count(void)
 {
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 6a4bd58..fafce9c 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -484,7 +484,7 @@
 	},
 };
 
-#define SH7372_CHCLR 0x220
+#define SH7372_CHCLR (0x220 - 0x20)
 
 static const struct sh_dmae_channel sh7372_dmae_channels[] = {
 	{
diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
index ea15646..9e3ae6b 100644
--- a/arch/arm/mach-spear13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
@@ -4,7 +4,7 @@
  * Debugging macro include header spear13xx machine family
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h
index 383ab04..d50bdb6 100644
--- a/arch/arm/mach-spear13xx/include/mach/dma.h
+++ b/arch/arm/mach-spear13xx/include/mach/dma.h
@@ -4,7 +4,7 @@
  * DMA information for SPEAr13xx machine family
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
index 6d8c45b..dac57fd 100644
--- a/arch/arm/mach-spear13xx/include/mach/generic.h
+++ b/arch/arm/mach-spear13xx/include/mach/generic.h
@@ -4,7 +4,7 @@
  * spear13xx machine family generic header file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h
index cd6f4f8..85f1763 100644
--- a/arch/arm/mach-spear13xx/include/mach/gpio.h
+++ b/arch/arm/mach-spear13xx/include/mach/gpio.h
@@ -4,7 +4,7 @@
  * GPIO macros for SPEAr13xx machine family
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h
index f542a24..271a62b 100644
--- a/arch/arm/mach-spear13xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear13xx/include/mach/irqs.h
@@ -4,7 +4,7 @@
  * IRQ helper macros for spear13xx machine family
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h
index 30c57ef..65f27de 100644
--- a/arch/arm/mach-spear13xx/include/mach/spear.h
+++ b/arch/arm/mach-spear13xx/include/mach/spear.h
@@ -4,7 +4,7 @@
  * spear13xx Machine family specific definition
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h
index 31af3e8d..3a58b82 100644
--- a/arch/arm/mach-spear13xx/include/mach/timex.h
+++ b/arch/arm/mach-spear13xx/include/mach/timex.h
@@ -4,7 +4,7 @@
  * SPEAr3XX machine family specific timex definitions
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h
index c784089..70fe72f 100644
--- a/arch/arm/mach-spear13xx/include/mach/uncompress.h
+++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h
@@ -4,7 +4,7 @@
  * Serial port stubs for kernel decompress status messages
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
index fefd15b..732d29b 100644
--- a/arch/arm/mach-spear13xx/spear1310.c
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -4,7 +4,7 @@
  * SPEAr1310 machine source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
index ee38cbc..81e4ed7 100644
--- a/arch/arm/mach-spear13xx/spear1340.c
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -4,7 +4,7 @@
  * SPEAr1340 machine source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
index 50b349a..cf936b1 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -4,7 +4,7 @@
  * SPEAr13XX machines common source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S
index 590519f..0a6381f 100644
--- a/arch/arm/mach-spear3xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-spear3xx/include/mach/debug-macro.S
@@ -4,7 +4,7 @@
  * Debugging macro include header spear3xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 4a95b94..ce19113 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -4,7 +4,7 @@
  * SPEAr3XX machine family generic header file
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h
index 451b208..2ac74c6 100644
--- a/arch/arm/mach-spear3xx/include/mach/gpio.h
+++ b/arch/arm/mach-spear3xx/include/mach/gpio.h
@@ -4,7 +4,7 @@
  * GPIO macros for SPEAr3xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
index 51bd62a..803de76 100644
--- a/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -4,7 +4,7 @@
  * IRQ helper macros for SPEAr3xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 18e2ac5..6309bf6 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -4,7 +4,7 @@
  * Miscellaneous registers definitions for SPEAr3xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index 51eb9531..8cca951 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -4,7 +4,7 @@
  * SPEAr3xx Machine family specific definition
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h
index a38cc9d..9f5d08b 100644
--- a/arch/arm/mach-spear3xx/include/mach/timex.h
+++ b/arch/arm/mach-spear3xx/include/mach/timex.h
@@ -4,7 +4,7 @@
  * SPEAr3XX machine family specific timex definitions
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h
index 53ba8bb..b909b01 100644
--- a/arch/arm/mach-spear3xx/include/mach/uncompress.h
+++ b/arch/arm/mach-spear3xx/include/mach/uncompress.h
@@ -4,7 +4,7 @@
  * Serial port stubs for kernel decompress status messages
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index f74a05b..0f882ec 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -4,7 +4,7 @@
  * SPEAr300 machine source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 84dfb09..bbcf457 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -4,7 +4,7 @@
  * SPEAr310 machine source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index a88fa84..88d483b 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -4,7 +4,7 @@
  * SPEAr320 machine source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index f22419e..0f41bd1 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -4,7 +4,7 @@
  * SPEAr3XX machines common source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h
index 3a789db..d42cefc 100644
--- a/arch/arm/mach-spear6xx/include/mach/gpio.h
+++ b/arch/arm/mach-spear6xx/include/mach/gpio.h
@@ -4,7 +4,7 @@
  * GPIO macros for SPEAr6xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 179e457..c34acc2 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -4,7 +4,7 @@
  * Miscellaneous registers definitions for SPEAr6xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 4d6a2ee9..5beb7eb 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -33,7 +33,7 @@
 
 static bool is_enabled;
 
-static void tegra_cpu_reset_handler_enable(void)
+static void __init tegra_cpu_reset_handler_enable(void)
 {
 	void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
 	void __iomem *evp_cpu_reset =
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index fd3a5c3..7e47d37 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel, U300 machine.
 #
 
-obj-y		:= core.o clock.o timer.o
+obj-y		:= core.o timer.o
 obj-m		:=
 obj-n		:=
 obj-		:=
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
deleted file mode 100644
index 5535dd0..0000000
--- a/arch/arm/mach-u300/clock.c
+++ /dev/null
@@ -1,1504 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/clock.c
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Define clocks in the app platform.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/debugfs.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/seq_file.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/syscon.h>
-
-#include "clock.h"
-
-/*
- * TODO:
- * - move all handling of the CCR register into this file and create
- *   a spinlock for the CCR register
- * - switch to the clkdevice lookup mechanism that maps clocks to
- *   device ID:s instead when it becomes available in kernel 2.6.29.
- * - implement rate get/set for all clocks that need it.
- */
-
-/*
- * Syscon clock I/O registers lock so clock requests don't collide
- * NOTE: this is a local lock only used to lock access to clock and
- * reset registers in syscon.
- */
-static DEFINE_SPINLOCK(syscon_clkreg_lock);
-static DEFINE_SPINLOCK(syscon_resetreg_lock);
-
-/*
- * The clocking hierarchy currently looks like this.
- * NOTE: the idea is NOT to show how the clocks are routed on the chip!
- * The ideas is to show dependencies, so a clock higher up in the
- * hierarchy has to be on in order for another clock to be on. Now,
- * both CPU and DMA can actually be on top of the hierarchy, and that
- * is not modeled currently. Instead we have the backbone AMBA bus on
- * top. This bus cannot be programmed in any way but conceptually it
- * needs to be active for the bridges and devices to transport data.
- *
- * Please be aware that a few clocks are hw controlled, which mean that
- * the hw itself can turn on/off or change the rate of the clock when
- * needed!
- *
- *  AMBA bus
- *  |
- *  +- CPU
- *  +- FSMC NANDIF NAND Flash interface
- *  +- SEMI Shared Memory interface
- *  +- ISP Image Signal Processor (U335 only)
- *  +- CDS (U335 only)
- *  +- DMA Direct Memory Access Controller
- *  +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
- *  +- APEX
- *  +- VIDEO_ENC AVE2/3 Video Encoder
- *  +- XGAM Graphics Accelerator Controller
- *  +- AHB
- *  |
- *  +- ahb:0 AHB Bridge
- *  |  |
- *  |  +- ahb:1 INTCON Interrupt controller
- *  |  +- ahb:3 MSPRO  Memory Stick Pro controller
- *  |  +- ahb:4 EMIF   External Memory interface
- *  |
- *  +- fast:0 FAST bridge
- *  |  |
- *  |  +- fast:1 MMCSD MMC/SD card reader controller
- *  |  +- fast:2 I2S0  PCM I2S channel 0 controller
- *  |  +- fast:3 I2S1  PCM I2S channel 1 controller
- *  |  +- fast:4 I2C0  I2C channel 0 controller
- *  |  +- fast:5 I2C1  I2C channel 1 controller
- *  |  +- fast:6 SPI   SPI controller
- *  |  +- fast:7 UART1 Secondary UART (U335 only)
- *  |
- *  +- slow:0 SLOW bridge
- *     |
- *     +- slow:1 SYSCON (not possible to control)
- *     +- slow:2 WDOG Watchdog
- *     +- slow:3 UART0 primary UART
- *     +- slow:4 TIMER_APP Application timer - used in Linux
- *     +- slow:5 KEYPAD controller
- *     +- slow:6 GPIO controller
- *     +- slow:7 RTC controller
- *     +- slow:8 BT Bus Tracer (not used currently)
- *     +- slow:9 EH Event Handler (not used currently)
- *     +- slow:a TIMER_ACC Access style timer (not used currently)
- *     +- slow:b PPM (U335 only, what is that?)
- */
-
-/*
- * Reset control functions. We remember if a block has been
- * taken out of reset and don't remove the reset assertion again
- * and vice versa. Currently we only remove resets so the
- * enablement function is defined out.
- */
-static void syscon_block_reset_enable(struct clk *clk)
-{
-	u16 val;
-	unsigned long iflags;
-
-	/* Not all blocks support resetting */
-	if (!clk->res_reg || !clk->res_mask)
-		return;
-	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
-	val = readw(clk->res_reg);
-	val |= clk->res_mask;
-	writew(val, clk->res_reg);
-	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
-	clk->reset = true;
-}
-
-static void syscon_block_reset_disable(struct clk *clk)
-{
-	u16 val;
-	unsigned long iflags;
-
-	/* Not all blocks support resetting */
-	if (!clk->res_reg || !clk->res_mask)
-		return;
-	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
-	val = readw(clk->res_reg);
-	val &= ~clk->res_mask;
-	writew(val, clk->res_reg);
-	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
-	clk->reset = false;
-}
-
-int __clk_get(struct clk *clk)
-{
-	u16 val;
-
-	/* The MMC and MSPRO clocks need some special set-up */
-	if (!strcmp(clk->name, "MCLK")) {
-		/* Set default MMC clock divisor to 18.9 MHz */
-		writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
-		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-		/* Disable the MMC feedback clock */
-		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
-		/* Disable MSPRO frequency */
-		val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
-		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-	}
-	if (!strcmp(clk->name, "MSPRO")) {
-		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-		/* Disable the MMC feedback clock */
-		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
-		/* Enable MSPRO frequency */
-		val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
-		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-	}
-	return 1;
-}
-EXPORT_SYMBOL(__clk_get);
-
-void __clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(__clk_put);
-
-static void syscon_clk_disable(struct clk *clk)
-{
-	unsigned long iflags;
-
-	/* Don't touch the hardware controlled clocks */
-	if (clk->hw_ctrld)
-		return;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void syscon_clk_enable(struct clk *clk)
-{
-	unsigned long iflags;
-
-	/* Don't touch the hardware controlled clocks */
-	if (clk->hw_ctrld)
-		return;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static u16 syscon_clk_get_rate(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-	return val;
-}
-
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-static void enable_i2s0_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Set I2S0 to use the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void enable_i2s1_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Set I2S1 to use the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void disable_i2s0_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Disable I2S0 use of the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Deactivate VCXO if no one else is using VCXO */
-	if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
-		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void disable_i2s1_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Disable I2S1 use of the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Deactivate VCXO if no one else is using VCXO */
-	if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
-		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
-
-
-static void syscon_clk_rate_set_mclk(unsigned long rate)
-{
-	u16 val;
-	u32 reg;
-	unsigned long iflags;
-
-	switch (rate) {
-	case 18900000:
-		val = 0x0054;
-		break;
-	case 20800000:
-		val = 0x0044;
-		break;
-	case 23100000:
-		val = 0x0043;
-		break;
-	case 26000000:
-		val = 0x0033;
-		break;
-	case 29700000:
-		val = 0x0032;
-		break;
-	case 34700000:
-		val = 0x0022;
-		break;
-	case 41600000:
-		val = 0x0021;
-		break;
-	case 52000000:
-		val = 0x0011;
-		break;
-	case 104000000:
-		val = 0x0000;
-		break;
-	default:
-		printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n",
-		       rate);
-		return;
-	}
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
-		~U300_SYSCON_MMF0R_MASK;
-	writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-void syscon_clk_rate_set_cpuclk(unsigned long rate)
-{
-	u16 val;
-	unsigned long iflags;
-
-	switch (rate) {
-	case 13000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
-		break;
-	case 52000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
-		break;
-	case 104000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
-		break;
-	case 208000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
-		break;
-	default:
-		return;
-	}
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) &
-		~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long iflags;
-
-	spin_lock_irqsave(&clk->lock, iflags);
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		/* some blocks lack clocking registers and cannot be disabled */
-		if (clk->disable)
-			clk->disable(clk);
-		if (likely((u32)clk->parent))
-			clk_disable(clk->parent);
-	}
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-	if (unlikely(!strcmp(clk->name, "I2S0")))
-		disable_i2s0_vcxo();
-	if (unlikely(!strcmp(clk->name, "I2S1")))
-		disable_i2s1_vcxo();
-#endif
-	spin_unlock_irqrestore(&clk->lock, iflags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-int clk_enable(struct clk *clk)
-{
-	int ret = 0;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&clk->lock, iflags);
-	if (clk->usecount++ == 0) {
-		if (likely((u32)clk->parent))
-			ret = clk_enable(clk->parent);
-
-		if (unlikely(ret != 0))
-			clk->usecount--;
-		else {
-			/* remove reset line (we never enable reset again) */
-			syscon_block_reset_disable(clk);
-			/* clocks without enable function are always on */
-			if (clk->enable)
-				clk->enable(clk);
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-			if (unlikely(!strcmp(clk->name, "I2S0")))
-				enable_i2s0_vcxo();
-			if (unlikely(!strcmp(clk->name, "I2S1")))
-				enable_i2s1_vcxo();
-#endif
-		}
-	}
-	spin_unlock_irqrestore(&clk->lock, iflags);
-	return ret;
-
-}
-EXPORT_SYMBOL(clk_enable);
-
-/* Returns the clock rate in Hz */
-static unsigned long clk_get_rate_cpuclk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 52000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-		return 104000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 208000000;
-	default:
-		break;
-	}
-	return clk->rate;
-}
-
-static unsigned long clk_get_rate_ahb_clk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 6500000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 26000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 52000000;
-	default:
-		break;
-	}
-	return clk->rate;
-
-}
-
-static unsigned long clk_get_rate_emif_clk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 52000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 104000000;
-	default:
-		break;
-	}
-	return clk->rate;
-
-}
-
-static unsigned long clk_get_rate_xgamclk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 6500000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 26000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 52000000;
-	default:
-		break;
-	}
-
-	return clk->rate;
-}
-
-static unsigned long clk_get_rate_mclk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-		/*
-		 * Here, the 208 MHz PLL gets shut down and the always
-		 * on 13 MHz PLL used for RTC etc kicks into use
-		 * instead.
-		 */
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-	{
-		/*
-		 * This clock is under program control. The register is
-		 * divided in two nybbles, bit 7-4 gives cycles-1 to count
-		 * high, bit 3-0 gives cycles-1 to count low. Distribute
-		 * these with no more than 1 cycle difference between
-		 * low and high and add low and high to get the actual
-		 * divisor. The base PLL is 208 MHz. Writing 0x00 will
-		 * divide by 1 and 1 so the highest frequency possible
-		 * is 104 MHz.
-		 *
-		 * e.g. 0x54 =>
-		 * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
-		 */
-		u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
-			U300_SYSCON_MMF0R_MASK;
-		switch (val) {
-		case 0x0054:
-			return 18900000;
-		case 0x0044:
-			return 20800000;
-		case 0x0043:
-			return 23100000;
-		case 0x0033:
-			return 26000000;
-		case 0x0032:
-			return 29700000;
-		case 0x0022:
-			return 34700000;
-		case 0x0021:
-			return 41600000;
-		case 0x0011:
-			return 52000000;
-		case 0x0000:
-			return 104000000;
-		default:
-			break;
-		}
-	}
-	default:
-		break;
-	}
-
-	return clk->rate;
-}
-
-static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 26000000;
-	default:
-		break;
-	}
-
-	return clk->rate;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-	else
-		return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
-{
-	if (rate <= 18900000)
-		return 18900000;
-	if (rate <= 20800000)
-		return 20800000;
-	if (rate <= 23100000)
-		return 23100000;
-	if (rate <= 26000000)
-		return 26000000;
-	if (rate <= 29700000)
-		return 29700000;
-	if (rate <= 34700000)
-		return 34700000;
-	if (rate <= 41600000)
-		return 41600000;
-	if (rate <= 52000000)
-		return 52000000;
-	return -EINVAL;
-}
-
-static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
-{
-	if (rate <= 13000000)
-		return 13000000;
-	if (rate <= 52000000)
-		return 52000000;
-	if (rate <= 104000000)
-		return 104000000;
-	if (rate <= 208000000)
-		return 208000000;
-	return -EINVAL;
-}
-
-/*
- * This adjusts a requested rate to the closest exact rate
- * a certain clock can provide. For a fixed clock it's
- * mostly clk->rate.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	/* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */
-	/* Else default to fixed value */
-
-	if (clk->round_rate) {
-		return (long) clk->round_rate(clk, rate);
-	} else {
-		printk(KERN_ERR "clock: Failed to round rate of %s\n",
-		       clk->name);
-	}
-	return (long) clk->rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-static int clk_set_rate_mclk(struct clk *clk, unsigned long rate)
-{
-	syscon_clk_rate_set_mclk(clk_round_rate(clk, rate));
-	return 0;
-}
-
-static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate)
-{
-	syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate));
-	return 0;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	/* TODO: set for EMIFCLK and AHBCLK */
-	/* Else assume the clock is fixed and fail */
-	if (clk->set_rate) {
-		return clk->set_rate(clk, rate);
-	} else {
-		printk(KERN_ERR "clock: Failed to set %s to %ld hz\n",
-		       clk->name, rate);
-		return -EINVAL;
-	}
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * Clock definitions. The clock parents are set to respective
- * bridge and the clock framework makes sure that the clocks have
- * parents activated and are brought out of reset when in use.
- *
- * Clocks that have hw_ctrld = true are hw controlled, and the hw
- * can by itself turn these clocks on and off.
- * So in other words, we don't really have to care about them.
- */
-
-static struct clk amba_clk = {
-	.name	    = "AMBA",
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = false,
-	.lock       = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
-};
-
-/*
- * These blocks are connected directly to the AMBA bus
- * with no bridge.
- */
-
-static struct clk cpu_clk = {
-	.name	    = "CPU",
-	.parent	    = &amba_clk,
-	.rate	    = 208000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_CPU_RESET_EN,
-	.set_rate   = clk_set_rate_cpuclk,
-	.get_rate   = clk_get_rate_cpuclk,
-	.round_rate = clk_round_rate_cpuclk,
-	.lock       = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
-};
-
-static struct clk nandif_clk = {
-	.name       = "FSMC",
-	.parent	    = &amba_clk,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_NANDIF_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
-};
-
-static struct clk semi_clk = {
-	.name       = "SEMI",
-	.parent	    = &amba_clk,
-	.rate       = 0, /* FIXME */
-	/* It is not possible to reset SEMI */
-	.hw_ctrld   = false,
-	.reset	    = false,
-	.clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk isp_clk = {
-	.name	    = "ISP",
-	.parent	    = &amba_clk,
-	.rate	    = 0, /* FIXME */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_ISP_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
-};
-
-static struct clk cds_clk = {
-	.name	    = "CDS",
-	.parent	    = &amba_clk,
-	.rate	    = 0, /* FIXME */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_CDS_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
-};
-#endif
-
-static struct clk dma_clk = {
-	.name       = "DMA",
-	.parent	    = &amba_clk,
-	.rate       = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_DMAC_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
-};
-
-static struct clk aaif_clk = {
-	.name       = "AAIF",
-	.parent	    = &amba_clk,
-	.rate       = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_AAIF_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
-};
-
-static struct clk apex_clk = {
-	.name       = "APEX",
-	.parent	    = &amba_clk,
-	.rate       = 0, /* FIXME */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_APEX_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
-};
-
-static struct clk video_enc_clk = {
-	.name       = "VIDEO_ENC",
-	.parent	    = &amba_clk,
-	.rate       = 208000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = false,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	/* This has XGAM in the name but refers to the video encoder */
-	.res_mask   = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
-};
-
-static struct clk xgam_clk = {
-	.name       = "XGAMCLK",
-	.parent	    = &amba_clk,
-	.rate       = 52000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_XGAM_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_XGAM_CLK_EN,
-	.get_rate   = clk_get_rate_xgamclk,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
-};
-
-/* This clock is used to activate the video encoder */
-static struct clk ahb_clk = {
-	.name	    = "AHB",
-	.parent	    = &amba_clk,
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = false, /* This one is set to false due to HW bug */
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_AHB_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_AHB_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_ahb_clk,
-	.lock       = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
-};
-
-
-/*
- * Clocks on the AHB bridge
- */
-
-static struct clk ahb_subsys_clk = {
-	.name	    = "AHB_SUBSYS",
-	.parent	    = &amba_clk,
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = false,
-	.clk_val    = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_ahb_clk,
-	.lock       = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
-};
-
-static struct clk intcon_clk = {
-	.name	    = "INTCON",
-	.parent	    = &ahb_subsys_clk,
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
-	/* INTCON can be reset but not clock-gated */
-	.lock       = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
-
-};
-
-static struct clk mspro_clk = {
-	.name       = "MSPRO",
-	.parent	    = &ahb_subsys_clk,
-	.rate       = 0, /* FIXME */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_MSPRO_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
-};
-
-static struct clk emif_clk = {
-	.name	    = "EMIF",
-	.parent	    = &ahb_subsys_clk,
-	.rate	    = 104000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_EMIF_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_EMIF_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_emif_clk,
-	.lock       = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
-};
-
-
-/*
- * Clocks on the FAST bridge
- */
-static struct clk fast_clk = {
-	.name	    = "FAST_BRIDGE",
-	.parent	    = &amba_clk,
-	.rate	    = 13000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
-};
-
-/*
- * The MMCI apb_pclk is hardwired to the same terminal as the
- * external MCI clock. Thus this will be referenced twice.
- */
-static struct clk mmcsd_clk = {
-	.name       = "MCLK",
-	.parent	    = &fast_clk,
-	.rate       = 18900000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_MMC_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_MMC_CLK_EN,
-	.get_rate   = clk_get_rate_mclk,
-	.set_rate   = clk_set_rate_mclk,
-	.round_rate = clk_round_rate_mclk,
-	.disable    = syscon_clk_disable,
-	.enable     = syscon_clk_enable,
-	.lock       = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
-};
-
-static struct clk i2s0_clk = {
-	.name       = "i2s0",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
-};
-
-static struct clk i2s1_clk = {
-	.name       = "i2s1",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
-};
-
-static struct clk i2c0_clk = {
-	.name       = "I2C0",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_I2C0_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2C0_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
-};
-
-static struct clk i2c1_clk = {
-	.name       = "I2C1",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_I2C1_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2C1_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
-};
-
-/*
- * The SPI apb_pclk is hardwired to the same terminal as the
- * external SPI clock. Thus this will be referenced twice.
- */
-static struct clk spi_clk = {
-	.name       = "SPI",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_SPI_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_SPI_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk uart1_pclk = {
-	.name	    = "UART1_PCLK",
-	.parent	    = &fast_clk,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_UART1_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart1_pclk.lock),
-};
-
-/* This one is hardwired to PLL13 */
-static struct clk uart1_clk = {
-	.name	    = "UART1_CLK",
-	.rate	    = 13000000,
-	.hw_ctrld   = true,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
-};
-#endif
-
-
-/*
- * Clocks on the SLOW bridge
- */
-static struct clk slow_clk = {
-	.name	    = "SLOW_BRIDGE",
-	.parent	    = &amba_clk,
-	.rate	    = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
-};
-
-/* TODO: implement SYSCON clock? */
-
-static struct clk wdog_clk = {
-	.name	    = "WDOG",
-	.parent	    = &slow_clk,
-	.hw_ctrld   = false,
-	.rate	    = 32768,
-	.reset	    = false,
-	/* This is always on, cannot be enabled/disabled or reset */
-	.lock       = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
-};
-
-static struct clk uart0_pclk = {
-	.name	    = "UART0_PCLK",
-	.parent	    = &slow_clk,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_UART_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart0_pclk.lock),
-};
-
-/* This one is hardwired to PLL13 */
-static struct clk uart0_clk = {
-	.name	    = "UART0_CLK",
-	.parent	    = &slow_clk,
-	.rate	    = 13000000,
-	.hw_ctrld   = true,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart0_clk.lock),
-};
-
-static struct clk keypad_clk = {
-	.name       = "KEYPAD",
-	.parent	    = &slow_clk,
-	.rate       = 32768,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_KEYPAD_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
-};
-
-static struct clk gpio_clk = {
-	.name       = "GPIO",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_GPIO_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
-};
-
-static struct clk rtc_clk = {
-	.name	    = "RTC",
-	.parent	    = &slow_clk,
-	.rate	    = 32768,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
-	/* This clock is always on, cannot be enabled/disabled */
-	.lock       = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
-};
-
-static struct clk bustr_clk = {
-	.name       = "BUSTR",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_BTR_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
-};
-
-static struct clk evhist_clk = {
-	.name       = "EVHIST",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_EH_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
-};
-
-static struct clk timer_clk = {
-	.name       = "TIMER",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_ACC_TMR_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
-};
-
-/*
- * There is a binary divider in the hardware that divides
- * the 13MHz PLL by 13 down to 1 MHz.
- */
-static struct clk app_timer_clk = {
-	.name       = "TIMER_APP",
-	.parent	    = &slow_clk,
-	.rate       = 1000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_APP_TMR_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk ppm_clk = {
-	.name	    = "PPM",
-	.parent	    = &slow_clk,
-	.rate	    = 0, /* FIXME */
-	.hw_ctrld   = true, /* TODO: Look up if it is hw ctrld or not */
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_PPM_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
-};
-#endif
-
-#define DEF_LOOKUP(devid, clkref)		\
-	{					\
-	.dev_id = devid,			\
-	.clk = clkref,				\
-	}
-
-#define DEF_LOOKUP_CON(devid, conid, clkref)	\
-	{					\
-	.dev_id = devid,			\
-	.con_id = conid,			\
-	.clk = clkref,				\
-	}
-
-/*
- * Here we only define clocks that are meaningful to
- * look up through clockdevice.
- */
-static struct clk_lookup lookups[] = {
-	/* Connected directly to the AMBA bus */
-	DEF_LOOKUP("amba",      &amba_clk),
-	DEF_LOOKUP("cpu",       &cpu_clk),
-	DEF_LOOKUP("fsmc-nand", &nandif_clk),
-	DEF_LOOKUP("semi",      &semi_clk),
-#ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("isp",       &isp_clk),
-	DEF_LOOKUP("cds",       &cds_clk),
-#endif
-	DEF_LOOKUP("dma",       &dma_clk),
-	DEF_LOOKUP("msl",       &aaif_clk),
-	DEF_LOOKUP("apex",      &apex_clk),
-	DEF_LOOKUP("video_enc", &video_enc_clk),
-	DEF_LOOKUP("xgam",      &xgam_clk),
-	DEF_LOOKUP("ahb",       &ahb_clk),
-	/* AHB bridge clocks */
-	DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
-	DEF_LOOKUP("intcon",    &intcon_clk),
-	DEF_LOOKUP_CON("intcon", "apb_pclk", &intcon_clk),
-	DEF_LOOKUP("mspro",     &mspro_clk),
-	DEF_LOOKUP("pl172",     &emif_clk),
-	DEF_LOOKUP_CON("pl172", "apb_pclk", &emif_clk),
-	/* FAST bridge clocks */
-	DEF_LOOKUP("fast",      &fast_clk),
-	DEF_LOOKUP("mmci",      &mmcsd_clk),
-	DEF_LOOKUP_CON("mmci", "apb_pclk", &mmcsd_clk),
-	/*
-	 * The .0 and .1 identifiers on these comes from the platform device
-	 * .id field and are assigned when the platform devices are registered.
-	 */
-	DEF_LOOKUP("i2s.0",     &i2s0_clk),
-	DEF_LOOKUP("i2s.1",     &i2s1_clk),
-	DEF_LOOKUP("stu300.0",  &i2c0_clk),
-	DEF_LOOKUP("stu300.1",  &i2c1_clk),
-	DEF_LOOKUP("pl022",     &spi_clk),
-	DEF_LOOKUP_CON("pl022", "apb_pclk", &spi_clk),
-#ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("uart1",     &uart1_clk),
-	DEF_LOOKUP_CON("uart1", "apb_pclk", &uart1_pclk),
-#endif
-	/* SLOW bridge clocks */
-	DEF_LOOKUP("slow",      &slow_clk),
-	DEF_LOOKUP("coh901327_wdog",      &wdog_clk),
-	DEF_LOOKUP("uart0",     &uart0_clk),
-	DEF_LOOKUP_CON("uart0", "apb_pclk", &uart0_pclk),
-	DEF_LOOKUP("apptimer",  &app_timer_clk),
-	DEF_LOOKUP("coh901461-keypad",    &keypad_clk),
-	DEF_LOOKUP("u300-gpio", &gpio_clk),
-	DEF_LOOKUP("rtc-coh901331",      &rtc_clk),
-	DEF_LOOKUP("bustr",     &bustr_clk),
-	DEF_LOOKUP("evhist",    &evhist_clk),
-	DEF_LOOKUP("timer",     &timer_clk),
-#ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("ppm",       &ppm_clk),
-#endif
-};
-
-static void __init clk_register(void)
-{
-	/* Register the lookups */
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
-
-#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
-/*
- * The following makes it possible to view the status (especially
- * reference count and reset status) for the clocks in the platform
- * by looking into the special file <debugfs>/u300_clocks
- */
-
-/* A list of all clocks in the platform */
-static struct clk *clks[] = {
-	/* Top node clock for the AMBA bus */
-	&amba_clk,
-	/* Connected directly to the AMBA bus */
-	&cpu_clk,
-	&nandif_clk,
-	&semi_clk,
-#ifdef CONFIG_MACH_U300_BS335
-	&isp_clk,
-	&cds_clk,
-#endif
-	&dma_clk,
-	&aaif_clk,
-	&apex_clk,
-	&video_enc_clk,
-	&xgam_clk,
-	&ahb_clk,
-
-	/* AHB bridge clocks */
-	&ahb_subsys_clk,
-	&intcon_clk,
-	&mspro_clk,
-	&emif_clk,
-	/* FAST bridge clocks */
-	&fast_clk,
-	&mmcsd_clk,
-	&i2s0_clk,
-	&i2s1_clk,
-	&i2c0_clk,
-	&i2c1_clk,
-	&spi_clk,
-#ifdef CONFIG_MACH_U300_BS335
-	&uart1_clk,
-	&uart1_pclk,
-#endif
-	/* SLOW bridge clocks */
-	&slow_clk,
-	&wdog_clk,
-	&uart0_clk,
-	&uart0_pclk,
-	&app_timer_clk,
-	&keypad_clk,
-	&gpio_clk,
-	&rtc_clk,
-	&bustr_clk,
-	&evhist_clk,
-	&timer_clk,
-#ifdef CONFIG_MACH_U300_BS335
-	&ppm_clk,
-#endif
-};
-
-static int u300_clocks_show(struct seq_file *s, void *data)
-{
-	struct clk *clk;
-	int i;
-
-	seq_printf(s, "CLOCK           DEVICE          RESET STATE\t" \
-		   "ACTIVE\tUSERS\tHW CTRL FREQ\n");
-	seq_printf(s, "---------------------------------------------" \
-		   "-----------------------------------------\n");
-	for (i = 0; i < ARRAY_SIZE(clks); i++) {
-		clk = clks[i];
-		if (clk != ERR_PTR(-ENOENT)) {
-			/* Format clock and device name nicely */
-			char cdp[33];
-			int chars;
-
-			chars = snprintf(&cdp[0], 17, "%s", clk->name);
-			while (chars < 16) {
-				cdp[chars] = ' ';
-				chars++;
-			}
-			chars = snprintf(&cdp[16], 17, "%s", clk->dev ?
-					 dev_name(clk->dev) : "N/A");
-			while (chars < 16) {
-				cdp[chars+16] = ' ';
-				chars++;
-			}
-			cdp[32] = '\0';
-			if (clk->get_rate || clk->rate != 0)
-				seq_printf(s,
-					   "%s%s\t%s\t%d\t%s\t%lu Hz\n",
-					   &cdp[0],
-					   clk->reset ?
-					   "ASSERTED" : "RELEASED",
-					   clk->usecount ? "ON" : "OFF",
-					   clk->usecount,
-					   clk->hw_ctrld  ? "YES" : "NO ",
-					   clk_get_rate(clk));
-			else
-				seq_printf(s,
-					   "%s%s\t%s\t%d\t%s\t" \
-					   "(unknown rate)\n",
-					   &cdp[0],
-					   clk->reset ?
-					   "ASSERTED" : "RELEASED",
-					   clk->usecount ? "ON" : "OFF",
-					   clk->usecount,
-					   clk->hw_ctrld  ? "YES" : "NO ");
-		}
-	}
-	return 0;
-}
-
-static int u300_clocks_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, u300_clocks_show, NULL);
-}
-
-static const struct file_operations u300_clocks_operations = {
-	.open		= u300_clocks_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init init_clk_read_debugfs(void)
-{
-	/* Expose a simple debugfs interface to view all clocks */
-	(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
-				   NULL, NULL,
-				   &u300_clocks_operations);
-	return 0;
-}
-/*
- * This needs to come in after the core_initcall() for the
- * overall clocks, because debugfs is not available until
- * the subsystems come up.
- */
-module_init(init_clk_read_debugfs);
-#endif
-
-int __init u300_clock_init(void)
-{
-	u16 val;
-
-	/*
-	 * FIXME: shall all this powermanagement stuff really live here???
-	 */
-
-	/* Set system to run at PLL208, max performance, a known state. */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Wait for the PLL208 to lock if not locked in yet */
-	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
-		 U300_SYSCON_CSR_PLL208_LOCK_IND));
-
-	/* Power management enable */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
-	val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
-
-	clk_register();
-
-	/*
-	 * Some of these may be on when we boot the system so make sure they
-	 * are turned OFF.
-	 */
-	syscon_block_reset_enable(&timer_clk);
-	timer_clk.disable(&timer_clk);
-
-	/*
-	 * These shall be turned on by default when we boot the system
-	 * so make sure they are ON. (Adding CPU here is a bit too much.)
-	 * These clocks will be claimed by drivers later.
-	 */
-	syscon_block_reset_disable(&semi_clk);
-	syscon_block_reset_disable(&emif_clk);
-	clk_enable(&semi_clk);
-	clk_enable(&emif_clk);
-
-	return 0;
-}
diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h
deleted file mode 100644
index 4f50ca8..0000000
--- a/arch/arm/mach-u300/clock.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-u300/include/mach/clock.h
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * Adopted to ST-Ericsson U300 platforms by
- * Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __MACH_CLOCK_H
-#define __MACH_CLOCK_H
-
-#include <linux/clk.h>
-
-struct clk {
-	struct list_head node;
-	struct module *owner;
-	struct device *dev;
-	const char *name;
-	struct clk *parent;
-
-	spinlock_t lock;
-	unsigned long rate;
-	bool reset;
-	__u16 clk_val;
-	__s8 usecount;
-	void __iomem * res_reg;
-	__u16 res_mask;
-
-	bool hw_ctrld;
-
-	void (*recalc) (struct clk *);
-	int (*set_rate) (struct clk *, unsigned long);
-	unsigned long (*get_rate) (struct clk *);
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	void (*init) (struct clk *);
-	void (*enable) (struct clk *);
-	void (*disable) (struct clk *);
-};
-
-int u300_clock_init(void);
-
-#endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 3333974..03acf18 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -30,6 +30,7 @@
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/dma-mapping.h>
+#include <linux/platform_data/clk-u300.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -44,7 +45,6 @@
 #include <mach/dma_channels.h>
 #include <mach/gpio-u300.h>
 
-#include "clock.h"
 #include "spi.h"
 #include "i2c.h"
 #include "u300-gpio.h"
@@ -1658,12 +1658,20 @@
 	int i;
 
 	/* initialize clocking early, we want to clock the INTCON */
-	u300_clock_init();
+	u300_clk_init(U300_SYSCON_VBASE);
+
+	/* Bootstrap EMIF and SEMI clocks */
+	clk = clk_get_sys("pl172", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_prepare_enable(clk);
+	clk = clk_get_sys("semi", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_prepare_enable(clk);
 
 	/* Clock the interrupt controller */
 	clk = clk_get_sys("intcon", NULL);
 	BUG_ON(IS_ERR(clk));
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 
 	for (i = 0; i < U300_VIC_IRQS_END; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
@@ -1811,13 +1819,6 @@
 	/* Check what platform we run and print some status information */
 	u300_init_check_chip();
 
-	/* Set system to run at PLL208, max performance, a known state. */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Wait for the PLL208 to lock if not locked in yet */
-	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
-		 U300_SYSCON_CSR_PLL208_LOCK_IND));
 	/* Initialize SPI device with some board specifics */
 	u300_spi_init(&pl022_device);
 
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index bc1c789..56ac06d 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -354,7 +354,7 @@
 	/* Clock the interrupt controller */
 	clk = clk_get_sys("apptimer", NULL);
 	BUG_ON(IS_ERR(clk));
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 	rate = clk_get_rate(clk);
 
 	setup_sched_clock(u300_read_sched_clock, 32, rate);
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 9c74ac5..1509a3c 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -580,43 +580,12 @@
 	udelay(1);
 }
 
-/* This needs to be referenced by callbacks */
-struct pinctrl *u0_p;
-struct pinctrl_state *u0_def;
-struct pinctrl_state *u0_sleep;
-
-static void ux500_uart0_init(void)
-{
-	int ret;
-
-	if (IS_ERR(u0_p) || IS_ERR(u0_def))
-		return;
-
-	ret = pinctrl_select_state(u0_p, u0_def);
-	if (ret)
-		pr_err("could not set UART0 defstate\n");
-}
-
-static void ux500_uart0_exit(void)
-{
-	int ret;
-
-	if (IS_ERR(u0_p) || IS_ERR(u0_sleep))
-		return;
-
-	ret = pinctrl_select_state(u0_p, u0_sleep);
-	if (ret)
-		pr_err("could not set UART0 idlestate\n");
-}
-
 static struct amba_pl011_data uart0_plat = {
 #ifdef CONFIG_STE_DMA40
 	.dma_filter = stedma40_filter,
 	.dma_rx_param = &uart0_dma_cfg_rx,
 	.dma_tx_param = &uart0_dma_cfg_tx,
 #endif
-	.init = ux500_uart0_init,
-	.exit = ux500_uart0_exit,
 	.reset = ux500_uart0_reset,
 };
 
@@ -638,28 +607,7 @@
 
 static void __init mop500_uart_init(struct device *parent)
 {
-	struct amba_device *uart0_device;
-
-	uart0_device = db8500_add_uart0(parent, &uart0_plat);
-	if (uart0_device) {
-		u0_p = pinctrl_get(&uart0_device->dev);
-		if (IS_ERR(u0_p))
-			dev_err(&uart0_device->dev,
-				"could not get UART0 pinctrl\n");
-		else {
-			u0_def = pinctrl_lookup_state(u0_p,
-						      PINCTRL_STATE_DEFAULT);
-			if (IS_ERR(u0_def)) {
-				dev_err(&uart0_device->dev,
-					"could not get UART0 defstate\n");
-			}
-			u0_sleep = pinctrl_lookup_state(u0_p,
-							PINCTRL_STATE_SLEEP);
-			if (IS_ERR(u0_sleep))
-				dev_err(&uart0_device->dev,
-					"could not get UART0 idlestate\n");
-		}
-	}
+	db8500_add_uart0(parent, &uart0_plat);
 	db8500_add_uart1(parent, &uart1_plat);
 	db8500_add_uart2(parent, &uart2_plat);
 }
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index cf4687e..cd8ea35 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -169,26 +169,13 @@
 		.pfn		= __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
 		.length		= VERSATILE_PCI_CFG_BASE_SIZE,
 		.type		= MT_DEVICE
-	},
-#if 0
- 	{
-		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE0,
+	}, {
+		.virtual	=  (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0,
 		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE1,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE2,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
-		.length		= SZ_16M,
+		.length		= IO_SPACE_LIMIT,
 		.type		= MT_DEVICE
 	},
 #endif
-#endif
 };
 
 void __init versatile_map_io(void)
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
index 4d4973d..408e58d 100644
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -29,8 +29,9 @@
  */
 #define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
 #define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
+#define VERSATILE_PCI_VIRT_MEM_BASE0	(void __iomem *)PCIO_BASE
 
-/* macro to get at IO space when running virtually */
+/* macro to get at MMIO space when running virtually */
 #define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
 
 #define __io_address(n)		((void __iomem __force *)IO_ADDRESS(n))
diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h
new file mode 100644
index 0000000..0406513
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define PCIO_BASE	0xeb000000ul
+
+#define __io(a)		((a) + PCIO_BASE)
+
+#endif
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 15c6a00..e95bf84 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -169,11 +169,18 @@
 	.write	= versatile_write_config,
 };
 
+static struct resource io_port = {
+	.name	= "PCI",
+	.start	= 0,
+	.end	= IO_SPACE_LIMIT,
+	.flags	= IORESOURCE_IO,
+};
+
 static struct resource io_mem = {
 	.name	= "PCI I/O space",
 	.start	= VERSATILE_PCI_MEM_BASE0,
 	.end	= VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
-	.flags	= IORESOURCE_IO,
+	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource non_mem = {
@@ -200,6 +207,12 @@
 		       "memory region (%d)\n", ret);
 		goto out;
 	}
+	ret = request_resource(&ioport_resource, &io_port);
+	if (ret) {
+		printk(KERN_ERR "PCI: unable to allocate I/O "
+		       "port region (%d)\n", ret);
+		goto out;
+	}
 	ret = request_resource(&iomem_resource, &non_mem);
 	if (ret) {
 		printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
@@ -218,7 +231,7 @@
 	 * the mem resource for this bus
 	 * the prefetch mem resource for this bus
 	 */
-	pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset);
+	pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset);
 	pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
 
@@ -249,6 +262,7 @@
 
 	if (nr == 0) {
 		sys->mem_offset = 0;
+		sys->io_offset = 0;
 		ret = pci_versatile_setup_resources(sys);
 		if (ret < 0) {
 			printk("pci_versatile_setup: resources... oops?\n");
@@ -325,7 +339,6 @@
 static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
-	int devslot = PCI_SLOT(dev->devfn);
 
 	/* slot,  pin,	irq
 	 *  24     1     27
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 106c4c0..4044abc 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -228,7 +228,7 @@
 
 #define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
 
-unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
 
 void __init init_consistent_dma_size(unsigned long size)
 {
@@ -321,7 +321,7 @@
 	.vm_list	= LIST_HEAD_INIT(coherent_head.vm_list),
 };
 
-size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
+static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
 
 static int __init early_coherent_pool(char *p)
 {
@@ -1067,7 +1067,7 @@
 		return NULL;
 
 	while (count) {
-		int j, order = __ffs(count);
+		int j, order = __fls(count);
 
 		pages[i] = alloc_pages(gfp | __GFP_NOWARN, order);
 		while (!pages[i] && order)
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index c21d06c..f54d592 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -212,7 +212,7 @@
  * allocations.  This must be the smallest DMA mask in the system,
  * so a successful GFP_DMA allocation will always satisfy this.
  */
-u32 arm_dma_limit;
+phys_addr_t arm_dma_limit;
 
 static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
 	unsigned long dma_size)
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 93dc0c1..2e8a1ef 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -62,9 +62,9 @@
 #endif
 
 #ifdef CONFIG_ZONE_DMA
-extern u32 arm_dma_limit;
+extern phys_addr_t arm_dma_limit;
 #else
-#define arm_dma_limit ((u32)~0)
+#define arm_dma_limit ((phys_addr_t)~0)
 #endif
 
 extern phys_addr_t arm_lowmem_limit;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e5dad60..cf4528d 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -791,6 +791,79 @@
 	}
 }
 
+#ifndef CONFIG_ARM_LPAE
+
+/*
+ * The Linux PMD is made of two consecutive section entries covering 2MB
+ * (see definition in include/asm/pgtable-2level.h).  However a call to
+ * create_mapping() may optimize static mappings by using individual
+ * 1MB section mappings.  This leaves the actual PMD potentially half
+ * initialized if the top or bottom section entry isn't used, leaving it
+ * open to problems if a subsequent ioremap() or vmalloc() tries to use
+ * the virtual space left free by that unused section entry.
+ *
+ * Let's avoid the issue by inserting dummy vm entries covering the unused
+ * PMD halves once the static mappings are in place.
+ */
+
+static void __init pmd_empty_section_gap(unsigned long addr)
+{
+	struct vm_struct *vm;
+
+	vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
+	vm->addr = (void *)addr;
+	vm->size = SECTION_SIZE;
+	vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+	vm->caller = pmd_empty_section_gap;
+	vm_area_add_early(vm);
+}
+
+static void __init fill_pmd_gaps(void)
+{
+	struct vm_struct *vm;
+	unsigned long addr, next = 0;
+	pmd_t *pmd;
+
+	/* we're still single threaded hence no lock needed here */
+	for (vm = vmlist; vm; vm = vm->next) {
+		if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+			continue;
+		addr = (unsigned long)vm->addr;
+		if (addr < next)
+			continue;
+
+		/*
+		 * Check if this vm starts on an odd section boundary.
+		 * If so and the first section entry for this PMD is free
+		 * then we block the corresponding virtual address.
+		 */
+		if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+			pmd = pmd_off_k(addr);
+			if (pmd_none(*pmd))
+				pmd_empty_section_gap(addr & PMD_MASK);
+		}
+
+		/*
+		 * Then check if this vm ends on an odd section boundary.
+		 * If so and the second section entry for this PMD is empty
+		 * then we block the corresponding virtual address.
+		 */
+		addr += vm->size;
+		if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+			pmd = pmd_off_k(addr) + 1;
+			if (pmd_none(*pmd))
+				pmd_empty_section_gap(addr);
+		}
+
+		/* no need to look at any vm entry until we hit the next PMD */
+		next = (addr + PMD_SIZE - 1) & PMD_MASK;
+	}
+}
+
+#else
+#define fill_pmd_gaps() do { } while (0)
+#endif
+
 static void * __initdata vmalloc_min =
 	(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
 
@@ -1072,6 +1145,7 @@
 	 */
 	if (mdesc->map_io)
 		mdesc->map_io();
+	fill_pmd_gaps();
 
 	/*
 	 * Finally flush the caches and tlb to ensure that we're in a
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 62135849..c641fb6 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -762,6 +762,11 @@
 			update_on_xread(ctx);
 			emit(ARM_MOV_R(r_A, r_X), ctx);
 			break;
+		case BPF_S_ANC_ALU_XOR_X:
+			/* A ^= X */
+			update_on_xread(ctx);
+			emit(ARM_EOR_R(r_A, r_A, r_X), ctx);
+			break;
 		case BPF_S_ANC_PROTOCOL:
 			/* A = ntohs(skb->protocol) */
 			ctx->seen |= SEEN_SKB;
diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h
index 99ae5e3f..7fa2f7d 100644
--- a/arch/arm/net/bpf_jit_32.h
+++ b/arch/arm/net/bpf_jit_32.h
@@ -68,6 +68,8 @@
 #define ARM_INST_CMP_R		0x01500000
 #define ARM_INST_CMP_I		0x03500000
 
+#define ARM_INST_EOR_R		0x00200000
+
 #define ARM_INST_LDRB_I		0x05d00000
 #define ARM_INST_LDRB_R		0x07d00000
 #define ARM_INST_LDRH_I		0x01d000b0
@@ -132,6 +134,8 @@
 #define ARM_CMP_R(rn, rm)	_AL3_R(ARM_INST_CMP, 0, rn, rm)
 #define ARM_CMP_I(rn, imm)	_AL3_I(ARM_INST_CMP, 0, rn, imm)
 
+#define ARM_EOR_R(rd, rn, rm)	_AL3_R(ARM_INST_EOR, rd, rn, rm)
+
 #define ARM_LDR_I(rt, rn, off)	(ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \
 				 | (off))
 #define ARM_LDRB_I(rt, rn, off)	(ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index 9129c9e..88726f4 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -50,6 +50,7 @@
 #include <linux/irq.h>
 #include <linux/clockchips.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 
 #include <mach/hardware.h>
 #include <asm/mach/time.h>
@@ -201,8 +202,16 @@
 	return 0;
 }
 
-void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init epit_timer_init(void __iomem *base, int irq)
 {
+	struct clk *timer_clk;
+
+	timer_clk = clk_get_sys("imx-epit.0", NULL);
+	if (IS_ERR(timer_clk)) {
+		pr_err("i.MX epit: unable to get clk\n");
+		return;
+	}
+
 	clk_prepare_enable(timer_clk);
 
 	timer_base = base;
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index cf663d8..e429ca1 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -54,8 +54,8 @@
 extern void imx51_soc_init(void);
 extern void imx53_soc_init(void);
 extern void imx51_init_late(void);
-extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
-extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
+extern void epit_timer_init(void __iomem *base, int irq);
+extern void mxc_timer_init(void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
 extern int mx25_clocks_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
index 7ded6f1..3c080a3 100644
--- a/arch/arm/plat-mxc/include/mach/mx2_cam.h
+++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h
@@ -23,6 +23,7 @@
 #ifndef __MACH_MX2_CAM_H_
 #define __MACH_MX2_CAM_H_
 
+#define MX2_CAMERA_SWAP16		(1 << 0)
 #define MX2_CAMERA_EXT_VSYNC		(1 << 1)
 #define MX2_CAMERA_CCIR			(1 << 2)
 #define MX2_CAMERA_CCIR_INTERLACE	(1 << 3)
@@ -30,6 +31,7 @@
 #define MX2_CAMERA_GATED_CLOCK		(1 << 5)
 #define MX2_CAMERA_INV_DATA		(1 << 6)
 #define MX2_CAMERA_PCLK_SAMPLE_RISING	(1 << 7)
+#define MX2_CAMERA_PACK_DIR_MSB		(1 << 8)
 
 /**
  * struct mx2_camera_platform_data - optional platform data for mx2_camera
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 99f958c..00e8e659 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -58,6 +58,7 @@
 /* MX31, MX35, MX25, MX5 */
 #define V2_TCTL_WAITEN		(1 << 3) /* Wait enable mode */
 #define V2_TCTL_CLK_IPG		(1 << 6)
+#define V2_TCTL_CLK_PER		(2 << 6)
 #define V2_TCTL_FRR		(1 << 9)
 #define V2_IR			0x0c
 #define V2_TSTAT		0x08
@@ -280,23 +281,22 @@
 	return 0;
 }
 
-void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init mxc_timer_init(void __iomem *base, int irq)
 {
 	uint32_t tctl_val;
+	struct clk *timer_clk;
 	struct clk *timer_ipg_clk;
 
-	if (!timer_clk) {
-		timer_clk = clk_get_sys("imx-gpt.0", "per");
-		if (IS_ERR(timer_clk)) {
-			pr_err("i.MX timer: unable to get clk\n");
-			return;
-		}
-
-		timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
-		if (!IS_ERR(timer_ipg_clk))
-			clk_prepare_enable(timer_ipg_clk);
+	timer_clk = clk_get_sys("imx-gpt.0", "per");
+	if (IS_ERR(timer_clk)) {
+		pr_err("i.MX timer: unable to get clk\n");
+		return;
 	}
 
+	timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
+	if (!IS_ERR(timer_ipg_clk))
+		clk_prepare_enable(timer_ipg_clk);
+
 	clk_prepare_enable(timer_clk);
 
 	timer_base = base;
@@ -309,7 +309,7 @@
 	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
 	if (timer_is_v2())
-		tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+		tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
 	else
 		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
 
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 62ec5c4..706b7e29 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -461,6 +461,7 @@
 	struct clk *c;
 	struct clk *pa;
 
+	mutex_lock(&clocks_mutex);
 	seq_printf(s, "%-30s %-30s %-10s %s\n",
 		"clock-name", "parent-name", "rate", "use-count");
 
@@ -469,6 +470,7 @@
 		seq_printf(s, "%-30s %-30s %-10lu %d\n",
 			c->name, pa ? pa->name : "none", c->rate, c->usecount);
 	}
+	mutex_unlock(&clocks_mutex);
 
 	return 0;
 }
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 297245d..de6c0a0 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -252,8 +252,6 @@
  * cpu_is_omap2423():	True for OMAP2423
  * cpu_is_omap2430():	True for OMAP2430
  * cpu_is_omap3430():	True for OMAP3430
- * cpu_is_omap3505():	True for OMAP3505
- * cpu_is_omap3517():	True for OMAP3517
  */
 #define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
 
@@ -277,8 +275,6 @@
 IS_OMAP_TYPE(2423, 0x2423)
 IS_OMAP_TYPE(2430, 0x2430)
 IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3517)
-IS_OMAP_TYPE(3517, 0x3517)
 
 #define cpu_is_omap310()		0
 #define cpu_is_omap730()		0
@@ -293,12 +289,6 @@
 #define cpu_is_omap2422()		0
 #define cpu_is_omap2423()		0
 #define cpu_is_omap2430()		0
-#define cpu_is_omap3503()		0
-#define cpu_is_omap3515()		0
-#define cpu_is_omap3525()		0
-#define cpu_is_omap3530()		0
-#define cpu_is_omap3505()		0
-#define cpu_is_omap3517()		0
 #define cpu_is_omap3430()		0
 #define cpu_is_omap3630()		0
 
@@ -350,12 +340,6 @@
 
 #if defined(CONFIG_ARCH_OMAP3)
 # undef cpu_is_omap3430
-# undef cpu_is_omap3503
-# undef cpu_is_omap3515
-# undef cpu_is_omap3525
-# undef cpu_is_omap3530
-# undef cpu_is_omap3505
-# undef cpu_is_omap3517
 # undef cpu_is_ti81xx
 # undef cpu_is_ti816x
 # undef cpu_is_ti814x
@@ -363,19 +347,6 @@
 # undef cpu_is_am33xx
 # undef cpu_is_am335x
 # define cpu_is_omap3430()		is_omap3430()
-# define cpu_is_omap3503()		(cpu_is_omap3430() &&		\
-						(!omap3_has_iva()) &&	\
-						(!omap3_has_sgx()))
-# define cpu_is_omap3515()		(cpu_is_omap3430() &&		\
-						(!omap3_has_iva()) &&	\
-						(omap3_has_sgx()))
-# define cpu_is_omap3525()		(cpu_is_omap3430() &&		\
-						(!omap3_has_sgx()) &&	\
-						(omap3_has_iva()))
-# define cpu_is_omap3530()		(cpu_is_omap3430())
-# define cpu_is_omap3517()		is_omap3517()
-# define cpu_is_omap3505()		(cpu_is_omap3517() &&		\
-						!omap3_has_sgx())
 # undef cpu_is_omap3630
 # define cpu_is_omap3630()		is_omap363x()
 # define cpu_is_ti81xx()		is_ti81xx()
@@ -424,10 +395,6 @@
 #define OMAP3630_REV_ES1_1	(OMAP363X_CLASS | (0x1 << 8))
 #define OMAP3630_REV_ES1_2	(OMAP363X_CLASS | (0x2 << 8))
 
-#define OMAP3517_CLASS		0x35170034
-#define OMAP3517_REV_ES1_0	OMAP3517_CLASS
-#define OMAP3517_REV_ES1_1	(OMAP3517_CLASS | (0x1 << 8))
-
 #define TI816X_CLASS		0x81600034
 #define TI8168_REV_ES1_0	TI816X_CLASS
 #define TI8168_REV_ES1_1	(TI816X_CLASS | (0x1 << 8))
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index a7754a8..5493bd9 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -172,8 +172,7 @@
 extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
 					int is_closed);
 
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
-	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers);
 void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
@@ -185,7 +184,6 @@
 static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
 {
 }
-
 #endif
 
 extern int omap_msdi_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 61fd837..c179378 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -582,7 +582,7 @@
  * Watchdog
  ****************************************************************************/
 static struct resource orion_wdt_resource =
-		DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
+		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
 
 static struct platform_device orion_wdt_device = {
 	.name		= "orion_wdt",
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index 58b7980..584c9bf 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -193,6 +193,7 @@
 	{ "pxa25x-nssp",	PXA25x_NSSP },
 	{ "pxa27x-ssp",		PXA27x_SSP },
 	{ "pxa168-ssp",		PXA168_SSP },
+	{ "pxa910-ssp",		PXA910_SSP },
 	{ },
 };
 
diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h
index 7d04875..c0c70a8 100644
--- a/arch/arm/plat-samsung/include/plat/map-s3c.h
+++ b/arch/arm/plat-samsung/include/plat/map-s3c.h
@@ -22,7 +22,7 @@
 #define S3C24XX_VA_WATCHDOG	S3C_VA_WATCHDOG
 
 #define S3C2412_VA_SSMC		S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00010000)
+#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00100000)
 
 #define S3C2410_PA_UART		(0x50000000)
 #define S3C24XX_PA_UART		S3C2410_PA_UART
diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
index f19aff1..bc4db9b 100644
--- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
@@ -25,7 +25,7 @@
 
 	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
 
-	if (s3c2410_wdtclk)
+	if (!IS_ERR(s3c2410_wdtclk))
 		clk_enable(s3c2410_wdtclk);
 
 	/* put initial values into count and data */
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index ab3de72..75b05ad 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -4,7 +4,7 @@
  * Debugging macro include header for spear platform
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h
index e14a3e4..2bc6b54 100644
--- a/arch/arm/plat-spear/include/plat/pl080.h
+++ b/arch/arm/plat-spear/include/plat/pl080.h
@@ -4,7 +4,7 @@
  * DMAC pl080 definitions for SPEAr platform
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h
index 03ed8b5..88a7fbd 100644
--- a/arch/arm/plat-spear/include/plat/shirq.h
+++ b/arch/arm/plat-spear/include/plat/shirq.h
@@ -4,7 +4,7 @@
  * SPEAr platform shared irq layer header file
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h
index 914d09d..ef95e5b 100644
--- a/arch/arm/plat-spear/include/plat/timex.h
+++ b/arch/arm/plat-spear/include/plat/timex.h
@@ -4,7 +4,7 @@
  * SPEAr platform specific timex definitions
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 6dd455b..2ce6cb1 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -4,7 +4,7 @@
  * Serial port stubs for kernel decompress status messages
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c
index a56a067..12cf27f 100644
--- a/arch/arm/plat-spear/pl080.c
+++ b/arch/arm/plat-spear/pl080.c
@@ -4,7 +4,7 @@
  * DMAC pl080 definitions for SPEAr platform
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
index ea0a613..4f99011 100644
--- a/arch/arm/plat-spear/restart.c
+++ b/arch/arm/plat-spear/restart.c
@@ -4,7 +4,7 @@
  * SPEAr platform specific restart functions
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c
index 961fb72..853e891e 100644
--- a/arch/arm/plat-spear/shirq.c
+++ b/arch/arm/plat-spear/shirq.c
@@ -4,7 +4,7 @@
  * SPEAr platform shared irq layer source file
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 81ee7cc..8d5c10a 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -1,5 +1,8 @@
 if PLAT_VERSATILE
 
+config PLAT_VERSATILE_CLOCK
+	bool
+
 config PLAT_VERSATILE_CLCD
 	bool
 
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index a5cb194..272769a8 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -1,4 +1,4 @@
-obj-y	:= clock.o
+obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o
 obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o
 obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
 obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
index 68d6510..d0b1607 100644
--- a/arch/h8300/kernel/setup.c
+++ b/arch/h8300/kernel/setup.c
@@ -35,6 +35,7 @@
 #include <asm/setup.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
+#include <asm/sections.h>
 
 #if defined(__H8300H__)
 #define CPU "H8/300H"
@@ -54,7 +55,6 @@
 
 char __initdata command_line[COMMAND_LINE_SIZE];
 
-extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
 extern int _ramstart, _ramend;
 extern char _target_name[];
 extern void h8300_gpio_init(void);
@@ -119,9 +119,9 @@
 	    memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS; 
 #endif
 
-	init_mm.start_code = (unsigned long) &_stext;
-	init_mm.end_code = (unsigned long) &_etext;
-	init_mm.end_data = (unsigned long) &_edata;
+	init_mm.start_code = (unsigned long) _stext;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
 	init_mm.brk = (unsigned long) 0; 
 
 #if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
@@ -134,15 +134,12 @@
 	printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n");
 
 #ifdef DEBUG
-	printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
-		"BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
-		(int) &_sdata, (int) &_edata,
-		(int) &_sbss, (int) &_ebss);
-	printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x "
-		"STACK=0x%06x-0x%06x\n",
-	       (int) &_ebss, (int) memory_start,
-		(int) memory_start, (int) memory_end,
-		(int) memory_end, (int) &_ramend);
+	printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p "
+		"BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start,
+		__bss_stop);
+	printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx "
+		"STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start,
+		memory_end, memory_end, &_ramend);
 #endif
 
 #ifdef CONFIG_DEFAULT_CMDLINE
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
index 973369c..981e250 100644
--- a/arch/h8300/mm/init.c
+++ b/arch/h8300/mm/init.c
@@ -36,6 +36,7 @@
 #include <asm/segment.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <asm/sections.h>
 
 #undef DEBUG
 
@@ -123,7 +124,6 @@
 	int codek = 0, datak = 0, initk = 0;
 	/* DAVIDM look at setup memory map generically with reserved area */
 	unsigned long tmp;
-	extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end;
 	extern unsigned long  _ramend, _ramstart;
 	unsigned long len = &_ramend - &_ramstart;
 	unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
@@ -142,9 +142,9 @@
 	/* this will put all memory onto the freelists */
 	totalram_pages = free_all_bootmem();
 
-	codek = (&_etext - &_stext) >> 10;
-	datak = (&_ebss - &_sdata) >> 10;
-	initk = (&__init_begin - &__init_end) >> 10;
+	codek = (_etext - _stext) >> 10;
+	datak = (__bss_stop - _sdata) >> 10;
+	initk = (__init_begin - __init_end) >> 10;
 
 	tmp = nr_free_pages() << PAGE_SHIFT;
 	printk(KERN_INFO "Memory available: %luk/%luk RAM, %luk/%luk ROM (%dk kernel code, %dk data)\n",
@@ -178,22 +178,21 @@
 {
 #ifdef CONFIG_RAMKERNEL
 	unsigned long addr;
-	extern char __init_begin, __init_end;
 /*
  *	the following code should be cool even if these sections
  *	are not page aligned.
  */
-	addr = PAGE_ALIGN((unsigned long)(&__init_begin));
+	addr = PAGE_ALIGN((unsigned long)(__init_begin));
 	/* next to check that the page we free is not a partial page */
-	for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) {
+	for (; addr + PAGE_SIZE < (unsigned long)__init_end; addr +=PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
 		free_page(addr);
 		totalram_pages++;
 	}
 	printk(KERN_INFO "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n",
-			(addr - PAGE_ALIGN((long) &__init_begin)) >> 10,
-			(int)(PAGE_ALIGN((unsigned long)(&__init_begin))),
+			(addr - PAGE_ALIGN((long) __init_begin)) >> 10,
+			(int)(PAGE_ALIGN((unsigned long)__init_begin)),
 			(int)(addr - PAGE_SIZE));
 #endif
 }
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index cac5b6b..1471201 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -7,6 +7,8 @@
 	select GENERIC_IRQ_SHOW
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 	select GENERIC_CPU_DEVICES
+	select GENERIC_STRNCPY_FROM_USER if MMU
+	select GENERIC_STRNLEN_USER if MMU
 	select FPU if MMU
 	select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE
 
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index 1a922fa..eafa253 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -1,2 +1,4 @@
 include include/asm-generic/Kbuild.asm
 header-y += cachectl.h
+
+generic-y += word-at-a-time.h
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index d63b99f..497c31c 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -86,7 +86,7 @@
 /*
  *	QSPI module.
  */
-#define	MCFQSPI_IOBASE		(MCF_IPSBAR + 0x340)
+#define	MCFQSPI_BASE		(MCF_IPSBAR + 0x340)
 #define	MCFQSPI_SIZE		0x40
 
 #define	MCFQSPI_CS0		147
diff --git a/arch/m68k/include/asm/uaccess_mm.h b/arch/m68k/include/asm/uaccess_mm.h
index 9c80cd5..472c891 100644
--- a/arch/m68k/include/asm/uaccess_mm.h
+++ b/arch/m68k/include/asm/uaccess_mm.h
@@ -379,12 +379,15 @@
 #define copy_from_user(to, from, n)	__copy_from_user(to, from, n)
 #define copy_to_user(to, from, n)	__copy_to_user(to, from, n)
 
-long strncpy_from_user(char *dst, const char __user *src, long count);
-long strnlen_user(const char __user *src, long n);
+#define user_addr_max() \
+	(segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL)
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
+
 unsigned long __clear_user(void __user *to, unsigned long n);
 
 #define clear_user	__clear_user
 
-#define strlen_user(str) strnlen_user(str, 32767)
-
 #endif /* _M68K_UACCESS_H */
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index 8b4a222..1bc10e6 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -286,7 +286,7 @@
 	}
 }
 
-#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU)
 asmlinkage int syscall_trace_enter(void)
 {
 	int ret = 0;
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index d7deb7f..707f057 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -85,7 +85,7 @@
 	mach_sched_init(timer_interrupt);
 }
 
-#ifdef CONFIG_M68KCLASSIC
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 
 u32 arch_gettimeoffset(void)
 {
@@ -108,4 +108,4 @@
 
 module_init(rtc_init);
 
-#endif /* CONFIG_M68KCLASSIC */
+#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
diff --git a/arch/m68k/lib/uaccess.c b/arch/m68k/lib/uaccess.c
index 5664386..5e97f2e 100644
--- a/arch/m68k/lib/uaccess.c
+++ b/arch/m68k/lib/uaccess.c
@@ -104,80 +104,6 @@
 EXPORT_SYMBOL(__generic_copy_to_user);
 
 /*
- * Copy a null terminated string from userspace.
- */
-long strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res;
-	char c;
-
-	if (count <= 0)
-		return count;
-
-	asm volatile ("\n"
-		"1:	"MOVES".b	(%2)+,%4\n"
-		"	move.b	%4,(%1)+\n"
-		"	jeq	2f\n"
-		"	subq.l	#1,%3\n"
-		"	jne	1b\n"
-		"2:	sub.l	%3,%0\n"
-		"3:\n"
-		"	.section .fixup,\"ax\"\n"
-		"	.even\n"
-		"10:	move.l	%5,%0\n"
-		"	jra	3b\n"
-		"	.previous\n"
-		"\n"
-		"	.section __ex_table,\"a\"\n"
-		"	.align	4\n"
-		"	.long	1b,10b\n"
-		"	.previous"
-		: "=d" (res), "+a" (dst), "+a" (src), "+r" (count), "=&d" (c)
-		: "i" (-EFAULT), "0" (count));
-
-	return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-long strnlen_user(const char __user *src, long n)
-{
-	char c;
-	long res;
-
-	asm volatile ("\n"
-		"1:	subq.l	#1,%1\n"
-		"	jmi	3f\n"
-		"2:	"MOVES".b	(%0)+,%2\n"
-		"	tst.b	%2\n"
-		"	jne	1b\n"
-		"	jra	4f\n"
-		"\n"
-		"3:	addq.l	#1,%0\n"
-		"4:	sub.l	%4,%0\n"
-		"5:\n"
-		"	.section .fixup,\"ax\"\n"
-		"	.even\n"
-		"20:	sub.l	%0,%0\n"
-		"	jra	5b\n"
-		"	.previous\n"
-		"\n"
-		"	.section __ex_table,\"a\"\n"
-		"	.align	4\n"
-		"	.long	2b,20b\n"
-		"	.previous\n"
-		: "=&a" (res), "+d" (n), "=&d" (c)
-		: "0" (src), "r" (src));
-
-	return res;
-}
-EXPORT_SYMBOL(strnlen_user);
-
-/*
  * Zero Userspace
  */
 
diff --git a/arch/m68k/platform/68328/timers.c b/arch/m68k/platform/68328/timers.c
index c801c17..f4dc9b2 100644
--- a/arch/m68k/platform/68328/timers.c
+++ b/arch/m68k/platform/68328/timers.c
@@ -53,6 +53,7 @@
 #endif
 
 static u32 m68328_tick_cnt;
+static irq_handler_t timer_interrupt;
 
 /***************************************************************************/
 
@@ -62,7 +63,7 @@
 	TSTAT &= 0;
 
 	m68328_tick_cnt += TICKS_PER_JIFFY;
-	return arch_timer_interrupt(irq, dummy);
+	return timer_interrupt(irq, dummy);
 }
 
 /***************************************************************************/
@@ -99,7 +100,7 @@
 
 /***************************************************************************/
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
 	/* disable timer 1 */
 	TCTL = 0;
@@ -115,6 +116,7 @@
 	/* Enable timer 1 */
 	TCTL |= TCTL_TEN;
 	clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
+	timer_interrupt = handler;
 }
 
 /***************************************************************************/
diff --git a/arch/m68k/platform/68360/config.c b/arch/m68k/platform/68360/config.c
index 255fc03..9877cef 100644
--- a/arch/m68k/platform/68360/config.c
+++ b/arch/m68k/platform/68360/config.c
@@ -35,6 +35,7 @@
 #define OSCILLATOR  (unsigned long int)33000000
 #endif
 
+static irq_handler_t timer_interrupt;
 unsigned long int system_clock;
 
 extern QUICC *pquicc;
@@ -52,7 +53,7 @@
 
   pquicc->timer_ter1 = 0x0002; /* clear timer event */
 
-  return arch_timer_interrupt(irq, dummy);
+  return timer_interrupt(irq, dummy);
 }
 
 static struct irqaction m68360_timer_irq = {
@@ -61,7 +62,7 @@
 	.handler = hw_tick,
 };
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
   unsigned char prescaler;
   unsigned short tgcr_save;
@@ -94,6 +95,8 @@
 
   pquicc->timer_ter1 = 0x0003; /* clear timer events */
 
+  timer_interrupt = handler;
+
   /* enable timer 1 interrupt in CIMR */
   setup_irq(CPMVEC_TIMER1, &m68360_timer_irq);
 
diff --git a/arch/m68k/platform/coldfire/clk.c b/arch/m68k/platform/coldfire/clk.c
index 9f1260c..44da406 100644
--- a/arch/m68k/platform/coldfire/clk.c
+++ b/arch/m68k/platform/coldfire/clk.c
@@ -42,4 +42,11 @@
 	return MCF_CLK;
 }
 EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *devm_clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+EXPORT_SYMBOL(devm_clk_get);
+
 /***************************************************************************/
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index c9aac24..6eb75b8 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -100,6 +100,14 @@
 	get_paca()->irq_happened |= PACA_IRQ_HARD_DIS;
 }
 
+/* include/linux/interrupt.h needs hard_irq_disable to be a macro */
+#define hard_irq_disable	hard_irq_disable
+
+static inline bool lazy_irq_pending(void)
+{
+	return !!(get_paca()->irq_happened & ~PACA_IRQ_HARD_DIS);
+}
+
 /*
  * This is called by asynchronous interrupts to conditionally
  * re-enable hard interrupts when soft-disabled after having
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index ed1718f..5971c85 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -558,27 +558,54 @@
 	mtmsrd	r10,1		  /* Update machine state */
 #endif /* CONFIG_PPC_BOOK3E */
 
-#ifdef CONFIG_PREEMPT
 	clrrdi	r9,r1,THREAD_SHIFT	/* current_thread_info() */
-	li	r0,_TIF_NEED_RESCHED	/* bits to check */
 	ld	r3,_MSR(r1)
 	ld	r4,TI_FLAGS(r9)
-	/* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */
-	rlwimi	r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING
-	and.	r0,r4,r0	/* check NEED_RESCHED and maybe SIGPENDING */
-	bne	do_work
-
-#else /* !CONFIG_PREEMPT */
-	ld	r3,_MSR(r1)	/* Returning to user mode? */
 	andi.	r3,r3,MSR_PR
-	beq	restore		/* if not, just restore regs and return */
+	beq	resume_kernel
 
 	/* Check current_thread_info()->flags */
+	andi.	r0,r4,_TIF_USER_WORK_MASK
+	beq	restore
+
+	andi.	r0,r4,_TIF_NEED_RESCHED
+	beq	1f
+	bl	.restore_interrupts
+	bl	.schedule
+	b	.ret_from_except_lite
+
+1:	bl	.save_nvgprs
+	bl	.restore_interrupts
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.do_notify_resume
+	b	.ret_from_except
+
+resume_kernel:
+#ifdef CONFIG_PREEMPT
+	/* Check if we need to preempt */
+	andi.	r0,r4,_TIF_NEED_RESCHED
+	beq+	restore
+	/* Check that preempt_count() == 0 and interrupts are enabled */
+	lwz	r8,TI_PREEMPT(r9)
+	cmpwi	cr1,r8,0
+	ld	r0,SOFTE(r1)
+	cmpdi	r0,0
+	crandc	eq,cr1*4+eq,eq
+	bne	restore
+
+	/*
+	 * Here we are preempting the current task. We want to make
+	 * sure we are soft-disabled first
+	 */
+	SOFT_DISABLE_INTS(r3,r4)
+1:	bl	.preempt_schedule_irq
+
+	/* Re-test flags and eventually loop */
 	clrrdi	r9,r1,THREAD_SHIFT
 	ld	r4,TI_FLAGS(r9)
-	andi.	r0,r4,_TIF_USER_WORK_MASK
-	bne	do_work
-#endif /* !CONFIG_PREEMPT */
+	andi.	r0,r4,_TIF_NEED_RESCHED
+	bne	1b
+#endif /* CONFIG_PREEMPT */
 
 	.globl	fast_exc_return_irq
 fast_exc_return_irq:
@@ -759,50 +786,6 @@
 #endif /* CONFIG_PPC_BOOK3E */
 1:	b	.ret_from_except /* What else to do here ? */
  
-
-
-3:
-do_work:
-#ifdef CONFIG_PREEMPT
-	andi.	r0,r3,MSR_PR	/* Returning to user mode? */
-	bne	user_work
-	/* Check that preempt_count() == 0 and interrupts are enabled */
-	lwz	r8,TI_PREEMPT(r9)
-	cmpwi	cr1,r8,0
-	ld	r0,SOFTE(r1)
-	cmpdi	r0,0
-	crandc	eq,cr1*4+eq,eq
-	bne	restore
-
-	/*
-	 * Here we are preempting the current task. We want to make
-	 * sure we are soft-disabled first
-	 */
-	SOFT_DISABLE_INTS(r3,r4)
-1:	bl	.preempt_schedule_irq
-
-	/* Re-test flags and eventually loop */
-	clrrdi	r9,r1,THREAD_SHIFT
-	ld	r4,TI_FLAGS(r9)
-	andi.	r0,r4,_TIF_NEED_RESCHED
-	bne	1b
-	b	restore
-
-user_work:
-#endif /* CONFIG_PREEMPT */
-
-	andi.	r0,r4,_TIF_NEED_RESCHED
-	beq	1f
-	bl	.restore_interrupts
-	bl	.schedule
-	b	.ret_from_except_lite
-
-1:	bl	.save_nvgprs
-	bl	.restore_interrupts
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_notify_resume
-	b	.ret_from_except
-
 unrecov_restore:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.unrecoverable_exception
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 7835a5e..1b41502 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -277,7 +277,7 @@
  * NOTE: This is called with interrupts hard disabled but not marked
  * as such in paca->irq_happened, so we need to resync this.
  */
-void restore_interrupts(void)
+void notrace restore_interrupts(void)
 {
 	if (irqs_disabled()) {
 		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 1b488e5..0794a30 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1312,7 +1312,7 @@
 
 extern char opal_secondary_entry;
 
-static void prom_query_opal(void)
+static void __init prom_query_opal(void)
 {
 	long rc;
 
@@ -1436,7 +1436,7 @@
 	prom_debug("prom_opal_hold_cpus: end...\n");
 }
 
-static void prom_opal_takeover(void)
+static void __init prom_opal_takeover(void)
 {
 	struct opal_secondary_data *data = &RELOC(opal_secondary_data);
 	struct opal_takeover_args *args = &data->args;
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index c6af1d6..3abe1b86 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -268,24 +268,45 @@
 	return err;
 }
 
-static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap)
+static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap)
 {
+	struct kvm *kvm = vcpu->kvm;
 	void *va;
 	unsigned long nb;
+	unsigned long gpa;
+
+	/*
+	 * We need to pin the page pointed to by vpap->next_gpa,
+	 * but we can't call kvmppc_pin_guest_page under the lock
+	 * as it does get_user_pages() and down_read().  So we
+	 * have to drop the lock, pin the page, then get the lock
+	 * again and check that a new area didn't get registered
+	 * in the meantime.
+	 */
+	for (;;) {
+		gpa = vpap->next_gpa;
+		spin_unlock(&vcpu->arch.vpa_update_lock);
+		va = NULL;
+		nb = 0;
+		if (gpa)
+			va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
+		spin_lock(&vcpu->arch.vpa_update_lock);
+		if (gpa == vpap->next_gpa)
+			break;
+		/* sigh... unpin that one and try again */
+		if (va)
+			kvmppc_unpin_guest_page(kvm, va);
+	}
 
 	vpap->update_pending = 0;
-	va = NULL;
-	if (vpap->next_gpa) {
-		va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
-		if (nb < vpap->len) {
-			/*
-			 * If it's now too short, it must be that userspace
-			 * has changed the mappings underlying guest memory,
-			 * so unregister the region.
-			 */
-			kvmppc_unpin_guest_page(kvm, va);
-			va = NULL;
-		}
+	if (va && nb < vpap->len) {
+		/*
+		 * If it's now too short, it must be that userspace
+		 * has changed the mappings underlying guest memory,
+		 * so unregister the region.
+		 */
+		kvmppc_unpin_guest_page(kvm, va);
+		va = NULL;
 	}
 	if (vpap->pinned_addr)
 		kvmppc_unpin_guest_page(kvm, vpap->pinned_addr);
@@ -296,20 +317,18 @@
 
 static void kvmppc_update_vpas(struct kvm_vcpu *vcpu)
 {
-	struct kvm *kvm = vcpu->kvm;
-
 	spin_lock(&vcpu->arch.vpa_update_lock);
 	if (vcpu->arch.vpa.update_pending) {
-		kvmppc_update_vpa(kvm, &vcpu->arch.vpa);
+		kvmppc_update_vpa(vcpu, &vcpu->arch.vpa);
 		init_vpa(vcpu, vcpu->arch.vpa.pinned_addr);
 	}
 	if (vcpu->arch.dtl.update_pending) {
-		kvmppc_update_vpa(kvm, &vcpu->arch.dtl);
+		kvmppc_update_vpa(vcpu, &vcpu->arch.dtl);
 		vcpu->arch.dtl_ptr = vcpu->arch.dtl.pinned_addr;
 		vcpu->arch.dtl_index = 0;
 	}
 	if (vcpu->arch.slb_shadow.update_pending)
-		kvmppc_update_vpa(kvm, &vcpu->arch.slb_shadow);
+		kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow);
 	spin_unlock(&vcpu->arch.vpa_update_lock);
 }
 
@@ -800,12 +819,39 @@
 	struct kvm_vcpu *vcpu, *vcpu0, *vnext;
 	long ret;
 	u64 now;
-	int ptid, i;
+	int ptid, i, need_vpa_update;
 
 	/* don't start if any threads have a signal pending */
-	list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+	need_vpa_update = 0;
+	list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
 		if (signal_pending(vcpu->arch.run_task))
 			return 0;
+		need_vpa_update |= vcpu->arch.vpa.update_pending |
+			vcpu->arch.slb_shadow.update_pending |
+			vcpu->arch.dtl.update_pending;
+	}
+
+	/*
+	 * Initialize *vc, in particular vc->vcore_state, so we can
+	 * drop the vcore lock if necessary.
+	 */
+	vc->n_woken = 0;
+	vc->nap_count = 0;
+	vc->entry_exit_count = 0;
+	vc->vcore_state = VCORE_RUNNING;
+	vc->in_guest = 0;
+	vc->napping_threads = 0;
+
+	/*
+	 * Updating any of the vpas requires calling kvmppc_pin_guest_page,
+	 * which can't be called with any spinlocks held.
+	 */
+	if (need_vpa_update) {
+		spin_unlock(&vc->lock);
+		list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+			kvmppc_update_vpas(vcpu);
+		spin_lock(&vc->lock);
+	}
 
 	/*
 	 * Make sure we are running on thread 0, and that
@@ -838,20 +884,10 @@
 		if (vcpu->arch.ceded)
 			vcpu->arch.ptid = ptid++;
 
-	vc->n_woken = 0;
-	vc->nap_count = 0;
-	vc->entry_exit_count = 0;
-	vc->vcore_state = VCORE_RUNNING;
 	vc->stolen_tb += mftb() - vc->preempt_tb;
-	vc->in_guest = 0;
 	vc->pcpu = smp_processor_id();
-	vc->napping_threads = 0;
 	list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
 		kvmppc_start_thread(vcpu);
-		if (vcpu->arch.vpa.update_pending ||
-		    vcpu->arch.slb_shadow.update_pending ||
-		    vcpu->arch.dtl.update_pending)
-			kvmppc_update_vpas(vcpu);
 		kvmppc_create_dtl_entry(vcpu, vc);
 	}
 	/* Grab any remaining hw threads so they can't go into the kernel */
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index a84aafc..a1044f4 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -810,7 +810,7 @@
 	lwz	r3,VCORE_NAPPING_THREADS(r5)
 	lwz	r4,VCPU_PTID(r9)
 	li	r0,1
-	sldi	r0,r0,r4
+	sld	r0,r0,r4
 	andc.	r3,r3,r0		/* no sense IPI'ing ourselves */
 	beq	43f
 	mulli	r4,r4,PACA_SIZE		/* get paca for thread 0 */
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index b6edbb3..6e8f677 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -635,7 +635,7 @@
  */
 static void __init parse_drconf_memory(struct device_node *memory)
 {
-	const u32 *dm, *usm;
+	const u32 *uninitialized_var(dm), *usm;
 	unsigned int n, rc, ranges, is_kexec_kdump = 0;
 	unsigned long lmb_size, base, size, sz;
 	int nid;
diff --git a/arch/powerpc/net/bpf_jit_64.S b/arch/powerpc/net/bpf_jit_64.S
index 55ba385..7d3a3b5 100644
--- a/arch/powerpc/net/bpf_jit_64.S
+++ b/arch/powerpc/net/bpf_jit_64.S
@@ -105,6 +105,7 @@
 	mr	r4, r_addr;					\
 	li	r6, SIZE;					\
 	bl	skb_copy_bits;					\
+	nop;							\
 	/* R3 = 0 on success */					\
 	addi	r1, r1, BPF_PPC_SLOWPATH_FRAME;			\
 	ld	r0, 16(r1);					\
@@ -156,6 +157,7 @@
 	mr	r4, r_addr;					\
 	li	r5, SIZE;					\
 	bl	bpf_internal_load_pointer_neg_helper;		\
+	nop;							\
 	/* R3 != 0 on success */				\
 	addi	r1, r1, BPF_PPC_SLOWPATH_FRAME;			\
 	ld	r0, 16(r1);					\
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 0915b1a..2d311c0 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -106,7 +106,7 @@
 		tcep++;
 	}
 
-	if (tbl->it_type == TCE_PCI_SWINV_CREATE)
+	if (tbl->it_type & TCE_PCI_SWINV_CREATE)
 		tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
 	return 0;
 }
@@ -121,7 +121,7 @@
 	while (npages--)
 		*(tcep++) = 0;
 
-	if (tbl->it_type == TCE_PCI_SWINV_FREE)
+	if (tbl->it_type & TCE_PCI_SWINV_FREE)
 		tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
 }
 
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 36f957f..8733a86 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -68,9 +68,7 @@
 };
 
 static void oops_to_nvram(struct kmsg_dumper *dumper,
-		enum kmsg_dump_reason reason,
-		const char *old_msgs, unsigned long old_len,
-		const char *new_msgs, unsigned long new_len);
+			  enum kmsg_dump_reason reason);
 
 static struct kmsg_dumper nvram_kmsg_dumper = {
 	.dump = oops_to_nvram
@@ -504,28 +502,6 @@
 }
 
 /*
- * Try to capture the last capture_len bytes of the printk buffer.  Return
- * the amount actually captured.
- */
-static size_t capture_last_msgs(const char *old_msgs, size_t old_len,
-				const char *new_msgs, size_t new_len,
-				char *captured, size_t capture_len)
-{
-	if (new_len >= capture_len) {
-		memcpy(captured, new_msgs + (new_len - capture_len),
-								capture_len);
-		return capture_len;
-	} else {
-		/* Grab the end of old_msgs. */
-		size_t old_tail_len = min(old_len, capture_len - new_len);
-		memcpy(captured, old_msgs + (old_len - old_tail_len),
-								old_tail_len);
-		memcpy(captured + old_tail_len, new_msgs, new_len);
-		return old_tail_len + new_len;
-	}
-}
-
-/*
  * Are we using the ibm,rtas-log for oops/panic reports?  And if so,
  * would logging this oops/panic overwrite an RTAS event that rtas_errd
  * hasn't had a chance to read and process?  Return 1 if so, else 0.
@@ -541,27 +517,6 @@
 						NVRAM_RTAS_READ_TIMEOUT);
 }
 
-/* Squeeze out each line's <n> severity prefix. */
-static size_t elide_severities(char *buf, size_t len)
-{
-	char *in, *out, *buf_end = buf + len;
-	/* Assume a <n> at the very beginning marks the start of a line. */
-	int newline = 1;
-
-	in = out = buf;
-	while (in < buf_end) {
-		if (newline && in+3 <= buf_end &&
-				*in == '<' && isdigit(in[1]) && in[2] == '>') {
-			in += 3;
-			newline = 0;
-		} else {
-			newline = (*in == '\n');
-			*out++ = *in++;
-		}
-	}
-	return out - buf;
-}
-
 /* Derived from logfs_compress() */
 static int nvram_compress(const void *in, void *out, size_t inlen,
 							size_t outlen)
@@ -619,9 +574,7 @@
  * partition.  If that's too much, go back and capture uncompressed text.
  */
 static void oops_to_nvram(struct kmsg_dumper *dumper,
-		enum kmsg_dump_reason reason,
-		const char *old_msgs, unsigned long old_len,
-		const char *new_msgs, unsigned long new_len)
+			  enum kmsg_dump_reason reason)
 {
 	static unsigned int oops_count = 0;
 	static bool panicking = false;
@@ -660,14 +613,14 @@
 		return;
 
 	if (big_oops_buf) {
-		text_len = capture_last_msgs(old_msgs, old_len,
-			new_msgs, new_len, big_oops_buf, big_oops_buf_sz);
-		text_len = elide_severities(big_oops_buf, text_len);
+		kmsg_dump_get_buffer(dumper, false,
+				     big_oops_buf, big_oops_buf_sz, &text_len);
 		rc = zip_oops(text_len);
 	}
 	if (rc != 0) {
-		text_len = capture_last_msgs(old_msgs, old_len,
-				new_msgs, new_len, oops_data, oops_data_sz);
+		kmsg_dump_rewind(dumper);
+		kmsg_dump_get_buffer(dumper, true,
+				     oops_data, oops_data_sz, &text_len);
 		err_type = ERR_TYPE_KERNEL_PANIC;
 		*oops_len = (u16) text_len;
 	}
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index 41a34bc..e61483e 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -106,7 +106,7 @@
 	 * we first hard disable then check.
 	 */
 	hard_irq_disable();
-	if (get_paca()->irq_happened == 0)
+	if (!lazy_irq_pending())
 		cede_processor();
 }
 
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 0f3ab06..eab3492 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -971,7 +971,7 @@
 		/* print cpus waiting or in xmon */
 		printf("cpus stopped:");
 		count = 0;
-		for (cpu = 0; cpu < NR_CPUS; ++cpu) {
+		for_each_possible_cpu(cpu) {
 			if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
 				if (count == 0)
 					printf(" %x", cpu);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 99bcd0e..31d9db7 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -32,6 +32,8 @@
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
+	select GENERIC_STRNCPY_FROM_USER
+	select GENERIC_STRNLEN_USER
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 46edf07..aed701c 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -9,6 +9,12 @@
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
 #
+ifneq ($(SUBARCH),$(ARCH))
+  ifeq ($(CROSS_COMPILE),)
+    CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux-  $(UTS_MACHINE)-linux-gnu-  $(UTS_MACHINE)-unknown-linux-gnu-)
+  endif
+endif
+
 isa-y					:= any
 isa-$(CONFIG_SH_DSP)			:= sh
 isa-$(CONFIG_CPU_SH2)			:= sh2
@@ -106,19 +112,13 @@
 KBUILD_DEFCONFIG	:= cayman_defconfig
 endif
 
-ifneq ($(SUBARCH),$(ARCH))
-  ifeq ($(CROSS_COMPILE),)
-    CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux-  $(UTS_MACHINE)-linux-gnu-  $(UTS_MACHINE)-unknown-linux-gnu-)
-  endif
-endif
-
 ifdef CONFIG_CPU_LITTLE_ENDIAN
 ld-bfd			:= elf32-$(UTS_MACHINE)-linux
-LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd)
+LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64 --oformat $(ld-bfd)
 LDFLAGS			+= -EL
 else
 ld-bfd			:= elf32-$(UTS_MACHINE)big-linux
-LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd)
+LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)
 LDFLAGS			+= -EB
 endif
 
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 158c917..43a179c 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -201,8 +201,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= evtirq(0xa20),
-		.end	= evtirq(0xa20),
+		.start	= evt2irq(0xa20),
+		.end	= evt2irq(0xa20),
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
index c045142..9e702f2 100644
--- a/arch/sh/drivers/pci/pcie-sh7786.c
+++ b/arch/sh/drivers/pci/pcie-sh7786.c
@@ -239,7 +239,7 @@
 	clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR);
 	clk->enable_bit = BITS_CKE;
 
-	ret = sh_clk_mstp32_register(clk, 1);
+	ret = sh_clk_mstp_register(clk, 1);
 	if (unlikely(ret < 0))
 		goto err_phy;
 
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index 7beb423..7b673dd 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -1,5 +1,39 @@
 include include/asm-generic/Kbuild.asm
 
+generic-y += bitsperlong.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += delay.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kvm_para.h
+generic-y += local.h
+generic-y += local64.h
+generic-y += param.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += shmbuf.h
+generic-y += siginfo.h
+generic-y += sizes.h
+generic-y += socket.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += ucontext.h
+generic-y += xor.h
+
 header-y += cachectl.h
 header-y += cpu-features.h
 header-y += hw_breakpoint.h
diff --git a/arch/sh/include/asm/bitsperlong.h b/arch/sh/include/asm/bitsperlong.h
deleted file mode 100644
index 6dc0bb0..0000000
--- a/arch/sh/include/asm/bitsperlong.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/bitsperlong.h>
diff --git a/arch/sh/include/asm/cputime.h b/arch/sh/include/asm/cputime.h
deleted file mode 100644
index 6ca395d..0000000
--- a/arch/sh/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __SH_CPUTIME_H
-#define __SH_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __SH_CPUTIME_H */
diff --git a/arch/sh/include/asm/current.h b/arch/sh/include/asm/current.h
deleted file mode 100644
index 4c51401..0000000
--- a/arch/sh/include/asm/current.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/current.h>
diff --git a/arch/sh/include/asm/delay.h b/arch/sh/include/asm/delay.h
deleted file mode 100644
index 9670e12..0000000
--- a/arch/sh/include/asm/delay.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/delay.h>
diff --git a/arch/sh/include/asm/div64.h b/arch/sh/include/asm/div64.h
deleted file mode 100644
index 6cd978c..0000000
--- a/arch/sh/include/asm/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/arch/sh/include/asm/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h
deleted file mode 100644
index 108d8c4..0000000
--- a/arch/sh/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/sh/include/asm/errno.h b/arch/sh/include/asm/errno.h
deleted file mode 100644
index 51cf6f9..0000000
--- a/arch/sh/include/asm/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_ERRNO_H
-#define __ASM_SH_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* __ASM_SH_ERRNO_H */
diff --git a/arch/sh/include/asm/fcntl.h b/arch/sh/include/asm/fcntl.h
deleted file mode 100644
index 46ab12d..0000000
--- a/arch/sh/include/asm/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/fcntl.h>
diff --git a/arch/sh/include/asm/ioctl.h b/arch/sh/include/asm/ioctl.h
deleted file mode 100644
index b279fe0..0000000
--- a/arch/sh/include/asm/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/arch/sh/include/asm/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h
deleted file mode 100644
index 84c7e51..0000000
--- a/arch/sh/include/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff --git a/arch/sh/include/asm/irq_regs.h b/arch/sh/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b..0000000
--- a/arch/sh/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/sh/include/asm/kvm_para.h b/arch/sh/include/asm/kvm_para.h
deleted file mode 100644
index 14fab8f..0000000
--- a/arch/sh/include/asm/kvm_para.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>
diff --git a/arch/sh/include/asm/local.h b/arch/sh/include/asm/local.h
deleted file mode 100644
index 9ed9b9c..0000000
--- a/arch/sh/include/asm/local.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_SH_LOCAL_H
-#define __ASM_SH_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __ASM_SH_LOCAL_H */
-
diff --git a/arch/sh/include/asm/local64.h b/arch/sh/include/asm/local64.h
deleted file mode 100644
index 36c93b5..0000000
--- a/arch/sh/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h
deleted file mode 100644
index 8eebf89..0000000
--- a/arch/sh/include/asm/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/mman.h>
diff --git a/arch/sh/include/asm/msgbuf.h b/arch/sh/include/asm/msgbuf.h
deleted file mode 100644
index 809134c..0000000
--- a/arch/sh/include/asm/msgbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/msgbuf.h>
diff --git a/arch/sh/include/asm/param.h b/arch/sh/include/asm/param.h
deleted file mode 100644
index 965d454..0000000
--- a/arch/sh/include/asm/param.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/param.h>
diff --git a/arch/sh/include/asm/parport.h b/arch/sh/include/asm/parport.h
deleted file mode 100644
index cf252af..0000000
--- a/arch/sh/include/asm/parport.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/parport.h>
diff --git a/arch/sh/include/asm/percpu.h b/arch/sh/include/asm/percpu.h
deleted file mode 100644
index 4db4b39..0000000
--- a/arch/sh/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARCH_SH_PERCPU
-#define __ARCH_SH_PERCPU
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_SH_PERCPU */
diff --git a/arch/sh/include/asm/poll.h b/arch/sh/include/asm/poll.h
deleted file mode 100644
index c98509d..0000000
--- a/arch/sh/include/asm/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/poll.h>
diff --git a/arch/sh/include/asm/resource.h b/arch/sh/include/asm/resource.h
deleted file mode 100644
index 9c2499a..0000000
--- a/arch/sh/include/asm/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_RESOURCE_H
-#define __ASM_SH_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* __ASM_SH_RESOURCE_H */
diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h
deleted file mode 100644
index 98dfc35..0000000
--- a/arch/sh/include/asm/scatterlist.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SCATTERLIST_H
-#define __ASM_SH_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* __ASM_SH_SCATTERLIST_H */
diff --git a/arch/sh/include/asm/sembuf.h b/arch/sh/include/asm/sembuf.h
deleted file mode 100644
index 7673b83..0000000
--- a/arch/sh/include/asm/sembuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/sembuf.h>
diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h
deleted file mode 100644
index a0cb0caf..0000000
--- a/arch/sh/include/asm/serial.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/serial.h>
diff --git a/arch/sh/include/asm/shmbuf.h b/arch/sh/include/asm/shmbuf.h
deleted file mode 100644
index 83c05fc..0000000
--- a/arch/sh/include/asm/shmbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/shmbuf.h>
diff --git a/arch/sh/include/asm/siginfo.h b/arch/sh/include/asm/siginfo.h
deleted file mode 100644
index 813040e..0000000
--- a/arch/sh/include/asm/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SIGINFO_H
-#define __ASM_SH_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif /* __ASM_SH_SIGINFO_H */
diff --git a/arch/sh/include/asm/sizes.h b/arch/sh/include/asm/sizes.h
deleted file mode 100644
index dd248c2..0000000
--- a/arch/sh/include/asm/sizes.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/sizes.h>
diff --git a/arch/sh/include/asm/socket.h b/arch/sh/include/asm/socket.h
deleted file mode 100644
index 6b71384..0000000
--- a/arch/sh/include/asm/socket.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/socket.h>
diff --git a/arch/sh/include/asm/statfs.h b/arch/sh/include/asm/statfs.h
deleted file mode 100644
index 9202a02..0000000
--- a/arch/sh/include/asm/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_STATFS_H
-#define __ASM_SH_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* __ASM_SH_STATFS_H */
diff --git a/arch/sh/include/asm/termbits.h b/arch/sh/include/asm/termbits.h
deleted file mode 100644
index 3935b10..0000000
--- a/arch/sh/include/asm/termbits.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/termbits.h>
diff --git a/arch/sh/include/asm/termios.h b/arch/sh/include/asm/termios.h
deleted file mode 100644
index 280d78a9d..0000000
--- a/arch/sh/include/asm/termios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/termios.h>
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
index 050f221..8698a80 100644
--- a/arch/sh/include/asm/uaccess.h
+++ b/arch/sh/include/asm/uaccess.h
@@ -25,6 +25,8 @@
 	(__chk_user_ptr(addr),		\
 	 __access_ok((unsigned long __force)(addr), (size)))
 
+#define user_addr_max()	(current_thread_info()->addr_limit.seg)
+
 /*
  * Uh, these should become the main single-value transfer routines ...
  * They automatically use the right size if we just have the right
@@ -100,6 +102,11 @@
 # include "uaccess_64.h"
 #endif
 
+extern long strncpy_from_user(char *dest, const char __user *src, long count);
+
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
+
 /* Generic arbitrary sized copy.  */
 /* Return the number of bytes NOT copied */
 __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
@@ -137,37 +144,6 @@
 	__cl_size;							\
 })
 
-/**
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst:   Destination address, in kernel space.  This buffer must be at
- *         least @count bytes long.
- * @src:   Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-#define strncpy_from_user(dest,src,count)				\
-({									\
-	unsigned long __sfu_src = (unsigned long)(src);			\
-	int __sfu_count = (int)(count);					\
-	long __sfu_res = -EFAULT;					\
-									\
-	if (__access_ok(__sfu_src, __sfu_count))			\
-		__sfu_res = __strncpy_from_user((unsigned long)(dest),	\
-				__sfu_src, __sfu_count);		\
-									\
-	__sfu_res;							\
-})
-
 static inline unsigned long
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
@@ -192,43 +168,6 @@
 	return __copy_size;
 }
 
-/**
- * strnlen_user: - Get the size of a string in user space.
- * @s: The string to measure.
- * @n: The maximum valid length
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- * If the string is too long, returns a value greater than @n.
- */
-static inline long strnlen_user(const char __user *s, long n)
-{
-	if (!__addr_ok(s))
-		return 0;
-	else
-		return __strnlen_user(s, n);
-}
-
-/**
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
- */
-#define strlen_user(str)	strnlen_user(str, ~0UL >> 1)
-
 /*
  * The exception table consists of pairs of addresses: the first is the
  * address of an instruction that is allowed to fault, and the second is
diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h
index ae0d24f..c0de7ee 100644
--- a/arch/sh/include/asm/uaccess_32.h
+++ b/arch/sh/include/asm/uaccess_32.h
@@ -170,79 +170,4 @@
 
 extern void __put_user_unknown(void);
 
-static inline int
-__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
-{
-	__kernel_size_t res;
-	unsigned long __dummy, _d, _s, _c;
-
-	__asm__ __volatile__(
-		"9:\n"
-		"mov.b	@%2+, %1\n\t"
-		"cmp/eq	#0, %1\n\t"
-		"bt/s	2f\n"
-		"1:\n"
-		"mov.b	%1, @%3\n\t"
-		"dt	%4\n\t"
-		"bf/s	9b\n\t"
-		" add	#1, %3\n\t"
-		"2:\n\t"
-		"sub	%4, %0\n"
-		"3:\n"
-		".section .fixup,\"ax\"\n"
-		"4:\n\t"
-		"mov.l	5f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	%9, %0\n\t"
-		".balign 4\n"
-		"5:	.long 3b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 9b,4b\n"
-		".previous"
-		: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c)
-		: "0" (__count), "2" (__src), "3" (__dest), "4" (__count),
-		  "i" (-EFAULT)
-		: "memory", "t");
-
-	return res;
-}
-
-/*
- * Return the size of a string (including the ending 0 even when we have
- * exceeded the maximum string length).
- */
-static inline long __strnlen_user(const char __user *__s, long __n)
-{
-	unsigned long res;
-	unsigned long __dummy;
-
-	__asm__ __volatile__(
-		"1:\t"
-		"mov.b	@(%0,%3), %1\n\t"
-		"cmp/eq	%4, %0\n\t"
-		"bt/s	2f\n\t"
-		" add	#1, %0\n\t"
-		"tst	%1, %1\n\t"
-		"bf	1b\n\t"
-		"2:\n"
-		".section .fixup,\"ax\"\n"
-		"3:\n\t"
-		"mov.l	4f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	#0, %0\n"
-		".balign 4\n"
-		"4:	.long 2b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 1b,3b\n"
-		".previous"
-		: "=z" (res), "=&r" (__dummy)
-		: "0" (0), "r" (__s), "r" (__n)
-		: "t");
-	return res;
-}
-
 #endif /* __ASM_SH_UACCESS_32_H */
diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
index 56fd20b..2e07e0f 100644
--- a/arch/sh/include/asm/uaccess_64.h
+++ b/arch/sh/include/asm/uaccess_64.h
@@ -84,8 +84,4 @@
 extern long __put_user_asm_q(void *, long);
 extern void __put_user_unknown(void);
 
-extern long __strnlen_user(const char *__s, long __n);
-extern int __strncpy_from_user(unsigned long __dest,
-	       unsigned long __user __src, int __count);
-
 #endif /* __ASM_SH_UACCESS_64_H */
diff --git a/arch/sh/include/asm/ucontext.h b/arch/sh/include/asm/ucontext.h
deleted file mode 100644
index 9bc07b9..0000000
--- a/arch/sh/include/asm/ucontext.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ucontext.h>
diff --git a/arch/sh/include/asm/word-at-a-time.h b/arch/sh/include/asm/word-at-a-time.h
new file mode 100644
index 0000000..6e38953
--- /dev/null
+++ b/arch/sh/include/asm/word-at-a-time.h
@@ -0,0 +1,53 @@
+#ifndef __ASM_SH_WORD_AT_A_TIME_H
+#define __ASM_SH_WORD_AT_A_TIME_H
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+# include <asm-generic/word-at-a-time.h>
+#else
+/*
+ * Little-endian version cribbed from x86.
+ */
+struct word_at_a_time {
+	const unsigned long one_bits, high_bits;
+};
+
+#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
+
+/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */
+static inline long count_masked_bytes(long mask)
+{
+	/* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
+	long a = (0x0ff0001+mask) >> 23;
+	/* Fix the 1 for 00 case */
+	return a & mask;
+}
+
+/* Return nonzero if it has a zero */
+static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c)
+{
+	unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
+	*bits = mask;
+	return mask;
+}
+
+static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c)
+{
+	return bits;
+}
+
+static inline unsigned long create_zero_mask(unsigned long bits)
+{
+	bits = (bits - 1) & ~bits;
+	return bits >> 7;
+}
+
+/* The mask we created is directly usable as a bytemask */
+#define zero_bytemask(mask) (mask)
+
+static inline unsigned long find_zero(unsigned long mask)
+{
+	return count_masked_bytes(mask);
+}
+#endif
+
+#endif
diff --git a/arch/sh/include/asm/xor.h b/arch/sh/include/asm/xor.h
deleted file mode 100644
index c82eb12..0000000
--- a/arch/sh/include/asm/xor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/xor.h>
diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h
deleted file mode 100644
index 1192e1c..0000000
--- a/arch/sh/include/cpu-sh2a/cpu/ubc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * SH-2A UBC definitions
- *
- * Copyright (C) 2008 Kieran Bingham
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ASM_CPU_SH2A_UBC_H
-#define __ASM_CPU_SH2A_UBC_H
-
-#define UBC_BARA                0xfffc0400
-#define UBC_BAMRA               0xfffc0404
-#define UBC_BBRA                0xfffc04a0	/* 16 bit access */
-#define UBC_BDRA                0xfffc0408
-#define UBC_BDMRA               0xfffc040c
-
-#define UBC_BARB                0xfffc0410
-#define UBC_BAMRB               0xfffc0414
-#define UBC_BBRB                0xfffc04b0	/* 16 bit access */
-#define UBC_BDRB                0xfffc0418
-#define UBC_BDMRB               0xfffc041c
-
-#define UBC_BRCR                0xfffc04c0
-
-#endif /* __ASM_CPU_SH2A_UBC_H */
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
index ea01a72..53638e2 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
@@ -283,7 +283,7 @@
 		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
index 7ac07b4..22e485d 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
@@ -276,7 +276,7 @@
 		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 8e1f970..c4cb740 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -261,7 +261,7 @@
 		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+		ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
index 35f75cf..37c41c7 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -311,7 +311,7 @@
 		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+		ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 2a87901..c87e78f 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -375,7 +375,7 @@
 		ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+		ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
index 1697642..deb683a 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
@@ -260,7 +260,7 @@
 			&div4_table);
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
index 04ab5ae..e84a432 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -148,7 +148,7 @@
 		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
 					   &div4_table);
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
index ab1c58f..1c83788 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -175,7 +175,7 @@
 		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
 					   &div4_table);
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
index 4917094..8bba6f1 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
@@ -194,7 +194,7 @@
 		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
 					   &div4_table);
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
index 0f11b39..a9422da 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -149,7 +149,7 @@
 		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
 					   &div4_table);
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index ff1f0e6..b7cf6a5 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -1569,86 +1569,6 @@
 #endif /* CONFIG_MMU */
 
 /*
- * int __strncpy_from_user(unsigned long __dest, unsigned long __src,
- *			   int __count)
- *
- * Inputs:
- * (r2)  target address
- * (r3)  source address
- * (r4)  maximum size in bytes
- *
- * Ouputs:
- * (*r2) copied data
- * (r2)  -EFAULT (in case of faulting)
- *       copied data (otherwise)
- */
-	.global	__strncpy_from_user
-__strncpy_from_user:
-	pta	___strncpy_from_user1, tr0
-	pta	___strncpy_from_user_done, tr1
-	or	r4, ZERO, r5		/* r5 = original count */
-	beq/u	r4, r63, tr1		/* early exit if r4==0 */
-	movi	-(EFAULT), r6		/* r6 = reply, no real fixup */
-	or	ZERO, ZERO, r7		/* r7 = data, clear top byte of data */
-
-___strncpy_from_user1:
-	ld.b	r3, 0, r7		/* Fault address: only in reading */
-	st.b	r2, 0, r7
-	addi	r2, 1, r2
-	addi	r3, 1, r3
-	beq/u	ZERO, r7, tr1
-	addi	r4, -1, r4		/* return real number of copied bytes */
-	bne/l	ZERO, r4, tr0
-
-___strncpy_from_user_done:
-	sub	r5, r4, r6		/* If done, return copied */
-
-___strncpy_from_user_exit:
-	or	r6, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-/*
- * extern long __strnlen_user(const char *__s, long __n)
- *
- * Inputs:
- * (r2)  source address
- * (r3)  source size in bytes
- *
- * Ouputs:
- * (r2)  -EFAULT (in case of faulting)
- *       string length (otherwise)
- */
-	.global	__strnlen_user
-__strnlen_user:
-	pta	___strnlen_user_set_reply, tr0
-	pta	___strnlen_user1, tr1
-	or	ZERO, ZERO, r5		/* r5 = counter */
-	movi	-(EFAULT), r6		/* r6 = reply, no real fixup */
-	or	ZERO, ZERO, r7		/* r7 = data, clear top byte of data */
-	beq	r3, ZERO, tr0
-
-___strnlen_user1:
-	ldx.b	r2, r5, r7		/* Fault address: only in reading */
-	addi	r3, -1, r3		/* No real fixup */
-	addi	r5, 1, r5
-	beq	r3, ZERO, tr0
-	bne	r7, ZERO, tr1
-! The line below used to be active.  This meant led to a junk byte lying between each pair
-! of entries in the argv & envp structures in memory.  Whilst the program saw the right data
-! via the argv and envp arguments to main, it meant the 'flat' representation visible through
-! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example.
-!	addi	r5, 1, r5		/* Include '\0' */
-
-___strnlen_user_set_reply:
-	or	r5, ZERO, r6		/* If done, return counter */
-
-___strnlen_user_exit:
-	or	r6, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-/*
  * extern long __get_user_asm_?(void *val, long addr)
  *
  * Inputs:
@@ -1982,8 +1902,6 @@
 	.long	___copy_user2, ___copy_user_exit
 	.long	___clear_user1, ___clear_user_exit
 #endif
-	.long	___strncpy_from_user1, ___strncpy_from_user_exit
-	.long	___strnlen_user1, ___strnlen_user_exit
 	.long	___get_user_asm_b1, ___get_user_asm_b_exit
 	.long	___get_user_asm_w1, ___get_user_asm_w_exit
 	.long	___get_user_asm_l1, ___get_user_asm_l_exit
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index 9b7a459..055d91b 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -4,6 +4,7 @@
 #include <linux/sched.h>
 #include <linux/export.h>
 #include <linux/stackprotector.h>
+#include <asm/fpu.h>
 
 struct kmem_cache *task_xstate_cachep = NULL;
 unsigned int xstate_size;
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 4264583e..602545b 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -33,6 +33,7 @@
 #include <asm/switch_to.h>
 
 struct task_struct *last_task_used_math = NULL;
+struct pt_regs fake_swapper_regs = { 0, };
 
 void show_regs(struct pt_regs *regs)
 {
diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
index 45afa5c..26a0774 100644
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ b/arch/sh/kernel/sh_ksyms_64.c
@@ -32,8 +32,6 @@
 EXPORT_SYMBOL(__get_user_asm_w);
 EXPORT_SYMBOL(__get_user_asm_l);
 EXPORT_SYMBOL(__get_user_asm_q);
-EXPORT_SYMBOL(__strnlen_user);
-EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(__copy_user);
diff --git a/arch/sparc/include/asm/cmt.h b/arch/sparc/include/asm/cmt.h
deleted file mode 100644
index 870db59..0000000
--- a/arch/sparc/include/asm/cmt.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef _SPARC64_CMT_H
-#define _SPARC64_CMT_H
-
-/* cmt.h: Chip Multi-Threading register definitions
- *
- * Copyright (C) 2004 David S. Miller (davem@redhat.com)
- */
-
-/* ASI_CORE_ID - private */
-#define LP_ID		0x0000000000000010UL
-#define  LP_ID_MAX	0x00000000003f0000UL
-#define  LP_ID_ID	0x000000000000003fUL
-
-/* ASI_INTR_ID - private */
-#define LP_INTR_ID	0x0000000000000000UL
-#define  LP_INTR_ID_ID	0x00000000000003ffUL
-
-/* ASI_CESR_ID - private */
-#define CESR_ID		0x0000000000000040UL
-#define  CESR_ID_ID	0x00000000000000ffUL
-
-/* ASI_CORE_AVAILABLE - shared */
-#define LP_AVAIL	0x0000000000000000UL
-#define  LP_AVAIL_1	0x0000000000000002UL
-#define  LP_AVAIL_0	0x0000000000000001UL
-
-/* ASI_CORE_ENABLE_STATUS - shared */
-#define LP_ENAB_STAT	0x0000000000000010UL
-#define  LP_ENAB_STAT_1	0x0000000000000002UL
-#define  LP_ENAB_STAT_0	0x0000000000000001UL
-
-/* ASI_CORE_ENABLE - shared */
-#define LP_ENAB		0x0000000000000020UL
-#define  LP_ENAB_1	0x0000000000000002UL
-#define  LP_ENAB_0	0x0000000000000001UL
-
-/* ASI_CORE_RUNNING - shared */
-#define LP_RUNNING_RW	0x0000000000000050UL
-#define LP_RUNNING_W1S	0x0000000000000060UL
-#define LP_RUNNING_W1C	0x0000000000000068UL
-#define  LP_RUNNING_1	0x0000000000000002UL
-#define  LP_RUNNING_0	0x0000000000000001UL
-
-/* ASI_CORE_RUNNING_STAT - shared */
-#define LP_RUN_STAT	0x0000000000000058UL
-#define  LP_RUN_STAT_1	0x0000000000000002UL
-#define  LP_RUN_STAT_0	0x0000000000000001UL
-
-/* ASI_XIR_STEERING - shared */
-#define LP_XIR_STEER	0x0000000000000030UL
-#define  LP_XIR_STEER_1	0x0000000000000002UL
-#define  LP_XIR_STEER_0	0x0000000000000001UL
-
-/* ASI_CMT_ERROR_STEERING - shared */
-#define CMT_ER_STEER	0x0000000000000040UL
-#define  CMT_ER_STEER_1	0x0000000000000002UL
-#define  CMT_ER_STEER_0	0x0000000000000001UL
-
-#endif /* _SPARC64_CMT_H */
diff --git a/arch/sparc/include/asm/mpmbox.h b/arch/sparc/include/asm/mpmbox.h
deleted file mode 100644
index f842303..0000000
--- a/arch/sparc/include/asm/mpmbox.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * mpmbox.h:  Interface and defines for the OpenProm mailbox
- *               facilities for MP machines under Linux.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_MPMBOX_H
-#define _SPARC_MPMBOX_H
-
-/* The prom allocates, for each CPU on the machine an unsigned
- * byte in physical ram.  You probe the device tree prom nodes
- * for these values.  The purpose of this byte is to be able to
- * pass messages from one cpu to another.
- */
-
-/* These are the main message types we have to look for in our
- * Cpu mailboxes, based upon these values we decide what course
- * of action to take.
- */
-
-/* The CPU is executing code in the kernel. */
-#define MAILBOX_ISRUNNING     0xf0
-
-/* Another CPU called romvec->pv_exit(), you should call
- * prom_stopcpu() when you see this in your mailbox.
- */
-#define MAILBOX_EXIT          0xfb
-
-/* Another CPU called romvec->pv_enter(), you should call
- * prom_cpuidle() when this is seen.
- */
-#define MAILBOX_GOSPIN        0xfc
-
-/* Another CPU has hit a breakpoint either into kadb or the prom
- * itself.  Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
- * at this point.
- */
-#define MAILBOX_BPT_SPIN      0xfd
-
-/* Oh geese, some other nitwit got a damn watchdog reset.  The party's
- * over so go call prom_stopcpu().
- */
-#define MAILBOX_WDOG_STOP     0xfe
-
-#ifndef __ASSEMBLY__
-
-/* Handy macro's to determine a cpu's state. */
-
-/* Is the cpu still in Power On Self Test? */
-#define MBOX_POST_P(letter)  ((letter) >= 0x00 && (letter) <= 0x7f)
-
-/* Is the cpu at the 'ok' prompt of the PROM? */
-#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
-
-/* Is the cpu spinning in the PROM? */
-#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
-
-/* Sanity check... This is junk mail, throw it out. */
-#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
-
-/* Is the cpu actively running an application/kernel-code? */
-#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC_MPMBOX_H) */
diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c
index 5cffdc5..3e244f3 100644
--- a/arch/sparc/kernel/vio.c
+++ b/arch/sparc/kernel/vio.c
@@ -443,7 +443,7 @@
 	root_vdev = vio_create_one(hp, root, NULL);
 	err = -ENODEV;
 	if (!root_vdev) {
-		printk(KERN_ERR "VIO: Coult not create root device.\n");
+		printk(KERN_ERR "VIO: Could not create root device.\n");
 		goto out_release;
 	}
 
diff --git a/arch/tile/include/asm/uaccess.h b/arch/tile/include/asm/uaccess.h
index c3dd275..9ab078a 100644
--- a/arch/tile/include/asm/uaccess.h
+++ b/arch/tile/include/asm/uaccess.h
@@ -146,7 +146,7 @@
 #ifdef __tilegx__
 #define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret)
 #define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret)
-#define __get_user_4(x, ptr, ret) __get_user_asm(ld4u, x, ptr, ret)
+#define __get_user_4(x, ptr, ret) __get_user_asm(ld4s, x, ptr, ret)
 #define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret)
 #else
 #define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret)
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index be6d9e3..3470624 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -2460,10 +2460,12 @@
 	pxor IN3, STATE4
 	movaps IN4, IV
 #else
-	pxor (INP), STATE2
-	pxor 0x10(INP), STATE3
 	pxor IN1, STATE4
 	movaps IN2, IV
+	movups (INP), IN1
+	pxor IN1, STATE2
+	movups 0x10(INP), IN2
+	pxor IN2, STATE3
 #endif
 	movups STATE1, (OUTP)
 	movups STATE2, 0x10(OUTP)
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index daeca56..673ac9b 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -38,7 +38,7 @@
 int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
 {
 	int err = 0;
-	bool ia32 = is_ia32_task();
+	bool ia32 = test_thread_flag(TIF_IA32);
 
 	if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
 		return -EFAULT;
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 340ee49..f91e80f 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -176,7 +176,7 @@
 #define X86_FEATURE_XSAVEOPT	(7*32+ 4) /* Optimized Xsave */
 #define X86_FEATURE_PLN		(7*32+ 5) /* Intel Power Limit Notification */
 #define X86_FEATURE_PTS		(7*32+ 6) /* Intel Package Thermal Status */
-#define X86_FEATURE_DTS		(7*32+ 7) /* Digital Thermal Sensor */
+#define X86_FEATURE_DTHERM	(7*32+ 7) /* Digital Thermal Sensor */
 #define X86_FEATURE_HW_PSTATE	(7*32+ 8) /* AMD HW-PState */
 
 /* Virtualization flags: Linux defined, word 8 */
diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index 43876f1..cb00ccc 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -47,16 +47,26 @@
  * they can run pmd_offset_map_lock or pmd_trans_huge or other pmd
  * operations.
  *
- * Without THP if the mmap_sem is hold for reading, the
- * pmd can only transition from null to not null while pmd_read_atomic runs.
- * So there's no need of literally reading it atomically.
+ * Without THP if the mmap_sem is hold for reading, the pmd can only
+ * transition from null to not null while pmd_read_atomic runs. So
+ * we can always return atomic pmd values with this function.
  *
  * With THP if the mmap_sem is hold for reading, the pmd can become
- * THP or null or point to a pte (and in turn become "stable") at any
- * time under pmd_read_atomic, so it's mandatory to read it atomically
- * with cmpxchg8b.
+ * trans_huge or none or point to a pte (and in turn become "stable")
+ * at any time under pmd_read_atomic. We could read it really
+ * atomically here with a atomic64_read for the THP enabled case (and
+ * it would be a whole lot simpler), but to avoid using cmpxchg8b we
+ * only return an atomic pmdval if the low part of the pmdval is later
+ * found stable (i.e. pointing to a pte). And we're returning a none
+ * pmdval if the low part of the pmd is none. In some cases the high
+ * and low part of the pmdval returned may not be consistent if THP is
+ * enabled (the low part may point to previously mapped hugepage,
+ * while the high part may point to a more recently mapped hugepage),
+ * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part
+ * of the pmd to be read atomically to decide if the pmd is unstable
+ * or not, with the only exception of when the low part of the pmd is
+ * zero in which case we return a none pmd.
  */
-#ifndef CONFIG_TRANSPARENT_HUGEPAGE
 static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
 {
 	pmdval_t ret;
@@ -74,12 +84,6 @@
 
 	return (pmd_t) { ret };
 }
-#else /* CONFIG_TRANSPARENT_HUGEPAGE */
-static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
-{
-	return (pmd_t) { atomic64_read((atomic64_t *)pmdp) };
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
 {
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 8afb693..b2297e5 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -422,12 +422,14 @@
 		return 0;
 	}
 
-	if (intsrc->source_irq == 0 && intsrc->global_irq == 2) {
+	if (intsrc->source_irq == 0) {
 		if (acpi_skip_timer_override) {
-			printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+			printk(PREFIX "BIOS IRQ0 override ignored.\n");
 			return 0;
 		}
-		if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
+
+		if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity
+			&& (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
 			intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
 			printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
 		}
@@ -1334,17 +1336,12 @@
 }
 
 /*
- * Force ignoring BIOS IRQ0 pin2 override
+ * Force ignoring BIOS IRQ0 override
  */
 static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
 {
-	/*
-	 * The ati_ixp4x0_rev() early PCI quirk should have set
-	 * the acpi_skip_timer_override flag already:
-	 */
 	if (!acpi_skip_timer_override) {
-		WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
-		pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+		pr_notice("%s detected: Ignoring BIOS IRQ0 override\n",
 			d->ident);
 		acpi_skip_timer_override = 1;
 	}
@@ -1438,7 +1435,7 @@
 	 * is enabled.  This input is incorrectly designated the
 	 * ISA IRQ 0 via an interrupt source override even though
 	 * it is wired to the output of the master 8259A and INTIN0
-	 * is not connected at all.  Force ignoring BIOS IRQ0 pin2
+	 * is not connected at all.  Force ignoring BIOS IRQ0
 	 * override in that cases.
 	 */
 	{
@@ -1473,6 +1470,14 @@
 		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
 		     },
 	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "FUJITSU SIEMENS",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+		     },
+	 },
 	{}
 };
 
diff --git a/arch/x86/kernel/cpu/mkcapflags.pl b/arch/x86/kernel/cpu/mkcapflags.pl
index dfea390..c7b3fe2 100644
--- a/arch/x86/kernel/cpu/mkcapflags.pl
+++ b/arch/x86/kernel/cpu/mkcapflags.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/perl -w
 #
 # Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h
 #
@@ -11,22 +11,35 @@
 print OUT "#include <asm/cpufeature.h>\n\n";
 print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n";
 
+%features = ();
+$err = 0;
+
 while (defined($line = <IN>)) {
 	if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) {
 		$macro = $1;
-		$feature = $2;
+		$feature = "\L$2";
 		$tail = $3;
 		if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) {
-			$feature = $1;
+			$feature = "\L$1";
 		}
 
-		if ($feature ne '') {
-			printf OUT "\t%-32s = \"%s\",\n",
-				"[$macro]", "\L$feature";
+		next if ($feature eq '');
+
+		if ($features{$feature}++) {
+			print STDERR "$in: duplicate feature name: $feature\n";
+			$err++;
 		}
+		printf OUT "\t%-32s = \"%s\",\n", "[$macro]", $feature;
 	}
 }
 print OUT "};\n";
 
 close(IN);
 close(OUT);
+
+if ($err) {
+	unlink($out);
+	exit(1);
+}
+
+exit(0);
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index addf9e8..ee8e9ab 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -31,7 +31,7 @@
 	const struct cpuid_bit *cb;
 
 	static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
-		{ X86_FEATURE_DTS,		CR_EAX, 0, 0x00000006, 0 },
+		{ X86_FEATURE_DTHERM,		CR_EAX, 0, 0x00000006, 0 },
 		{ X86_FEATURE_IDA,		CR_EAX, 1, 0x00000006, 0 },
 		{ X86_FEATURE_ARAT,		CR_EAX, 2, 0x00000006, 0 },
 		{ X86_FEATURE_PLN,		CR_EAX, 4, 0x00000006, 0 },
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 8bfb614..3f61904 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -444,12 +444,12 @@
 
 /**
  *	kgdb_arch_handle_exception - Handle architecture specific GDB packets.
- *	@vector: The error vector of the exception that happened.
+ *	@e_vector: The error vector of the exception that happened.
  *	@signo: The signal number of the exception that happened.
  *	@err_code: The error code of the exception that happened.
- *	@remcom_in_buffer: The buffer of the packet we have read.
- *	@remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
- *	@regs: The &struct pt_regs of the current process.
+ *	@remcomInBuffer: The buffer of the packet we have read.
+ *	@remcomOutBuffer: The buffer of %BUFMAX bytes to write a packet into.
+ *	@linux_regs: The &struct pt_regs of the current process.
  *
  *	This function MUST handle the 'c' and 's' command packets,
  *	as well packets to set / remove a hardware breakpoint, if used.
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 086eb58..f1b42b3 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -120,11 +120,6 @@
 	bool ret = false;
 	struct pvclock_vcpu_time_info *src;
 
-	/*
-	 * per_cpu() is safe here because this function is only called from
-	 * timer functions where preemption is already disabled.
-	 */
-	WARN_ON(!in_atomic());
 	src = &__get_cpu_var(hv_clock);
 	if ((src->flags & PVCLOCK_GUEST_STOPPED) != 0) {
 		__this_cpu_and(hv_clock.flags, ~PVCLOCK_GUEST_STOPPED);
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 62c9457..c0f420f 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -100,7 +100,7 @@
 				 struct dma_attrs *attrs)
 {
 	unsigned long dma_mask;
-	struct page *page = NULL;
+	struct page *page;
 	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	dma_addr_t addr;
 
@@ -108,6 +108,7 @@
 
 	flag |= __GFP_ZERO;
 again:
+	page = NULL;
 	if (!(flag & GFP_ATOMIC))
 		page = dma_alloc_from_contiguous(dev, count, get_order(size));
 	if (!page)
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 25b48ed..5de92f1 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -451,6 +451,14 @@
 			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
 		},
 	},
+	{	/* Handle problems with rebooting on the Precision M6600. */
+		.callback = set_pci_reboot,
+		.ident = "Dell OptiPlex 990",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"),
+		},
+	},
 	{ }
 };
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 3fab55b..7bd8a082 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -349,9 +349,12 @@
 
 static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
 {
-	if (c->phys_proc_id == o->phys_proc_id)
-		return topology_sane(c, o, "mc");
+	if (c->phys_proc_id == o->phys_proc_id) {
+		if (cpu_has(c, X86_FEATURE_AMD_DCM))
+			return true;
 
+		return topology_sane(c, o, "mc");
+	}
 	return false;
 }
 
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index be3cea4..57e168e 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3934,6 +3934,9 @@
 {
 	struct kvm_mmu_page *page;
 
+	if (list_empty(&kvm->arch.active_mmu_pages))
+		return;
+
 	page = container_of(kvm->arch.active_mmu_pages.prev,
 			    struct kvm_mmu_page, link);
 	kvm_mmu_prepare_zap_page(kvm, page, invalid_list);
diff --git a/arch/x86/lib/csum-wrappers_64.c b/arch/x86/lib/csum-wrappers_64.c
index 459b58a..25b7ae8 100644
--- a/arch/x86/lib/csum-wrappers_64.c
+++ b/arch/x86/lib/csum-wrappers_64.c
@@ -115,7 +115,7 @@
  * @src: source address
  * @dst: destination address
  * @len: number of bytes to be copied.
- * @isum: initial sum that is added into the result (32bit unfolded)
+ * @sum: initial sum that is added into the result (32bit unfolded)
  *
  * Returns an 32bit unfolded checksum of the buffer.
  */
diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c
index 677b1ed..4f74d94 100644
--- a/arch/x86/lib/usercopy.c
+++ b/arch/x86/lib/usercopy.c
@@ -22,7 +22,7 @@
 	void *map;
 	int ret;
 
-	if (__range_not_ok(from, n, TASK_SIZE) == 0)
+	if (__range_not_ok(from, n, TASK_SIZE))
 		return len;
 
 	do {
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index be1ef57..78fe3f1 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -180,7 +180,7 @@
 
 /**
  * ioremap_nocache     -   map bus memory into CPU space
- * @offset:    bus address of the memory
+ * @phys_addr:    bus address of the memory
  * @size:      size of the resource to map
  *
  * ioremap_nocache performs a platform specific sequence of operations to
@@ -217,7 +217,7 @@
 
 /**
  * ioremap_wc	-	map memory into CPU space write combined
- * @offset:	bus address of the memory
+ * @phys_addr:	bus address of the memory
  * @size:	size of the resource to map
  *
  * This version of ioremap ensures that the memory is marked write combining.
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index e1ebde3..a718e0d 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -122,7 +122,7 @@
 
 /**
  * clflush_cache_range - flush a cache range with clflush
- * @addr:	virtual start address
+ * @vaddr:	virtual start address
  * @size:	number of bytes to flush
  *
  * clflush is an unordered instruction which needs fencing with mfence
diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
index 3c6e328..028454f 100644
--- a/arch/x86/platform/mrst/early_printk_mrst.c
+++ b/arch/x86/platform/mrst/early_printk_mrst.c
@@ -110,19 +110,16 @@
 static int dumper_registered;
 
 static void dw_kmsg_dump(struct kmsg_dumper *dumper,
-			enum kmsg_dump_reason reason,
-			const char *s1, unsigned long l1,
-			const char *s2, unsigned long l2)
+			 enum kmsg_dump_reason reason)
 {
-	int i;
+	static char line[1024];
+	size_t len;
 
 	/* When run to this, we'd better re-init the HW */
 	mrst_early_console_init();
 
-	for (i = 0; i < l1; i++)
-		early_mrst_console.write(&early_mrst_console, s1 + i, 1);
-	for (i = 0; i < l2; i++)
-		early_mrst_console.write(&early_mrst_console, s2 + i, 1);
+	while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
+		early_mrst_console.write(&early_mrst_console, line, len);
 }
 
 /* Set the ratio rate to 115200, 8n1, IRQ disabled */
diff --git a/arch/x86/um/sys_call_table_32.c b/arch/x86/um/sys_call_table_32.c
index 416bd40..68d1dc9 100644
--- a/arch/x86/um/sys_call_table_32.c
+++ b/arch/x86/um/sys_call_table_32.c
@@ -39,9 +39,9 @@
 #undef __SYSCALL_I386
 #define __SYSCALL_I386(nr, sym, compat) [ nr ] = sym,
 
-typedef void (*sys_call_ptr_t)(void);
+typedef asmlinkage void (*sys_call_ptr_t)(void);
 
-extern void sys_ni_syscall(void);
+extern asmlinkage void sys_ni_syscall(void);
 
 const sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
 	/*
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index e74df95..ff962d4 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -209,6 +209,9 @@
 	       xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
 }
 
+#define CPUID_THERM_POWER_LEAF 6
+#define APERFMPERF_PRESENT 0
+
 static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
 static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
 
@@ -242,6 +245,11 @@
 		*dx = cpuid_leaf5_edx_val;
 		return;
 
+	case CPUID_THERM_POWER_LEAF:
+		/* Disabling APERFMPERF for kernel usage */
+		maskecx = ~(1 << APERFMPERF_PRESENT);
+		break;
+
 	case 0xb:
 		/* Suppress extended topology stuff */
 		maskebx = 0;
diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
index ffd08c4..64effdc6 100644
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -706,6 +706,7 @@
 	unsigned long uninitialized_var(address);
 	unsigned level;
 	pte_t *ptep = NULL;
+	int ret = 0;
 
 	pfn = page_to_pfn(page);
 	if (!PageHighMem(page)) {
@@ -741,6 +742,24 @@
 	list_add(&page->lru,  &m2p_overrides[mfn_hash(mfn)]);
 	spin_unlock_irqrestore(&m2p_override_lock, flags);
 
+	/* p2m(m2p(mfn)) == mfn: the mfn is already present somewhere in
+	 * this domain. Set the FOREIGN_FRAME_BIT in the p2m for the other
+	 * pfn so that the following mfn_to_pfn(mfn) calls will return the
+	 * pfn from the m2p_override (the backend pfn) instead.
+	 * We need to do this because the pages shared by the frontend
+	 * (xen-blkfront) can be already locked (lock_page, called by
+	 * do_read_cache_page); when the userspace backend tries to use them
+	 * with direct_IO, mfn_to_pfn returns the pfn of the frontend, so
+	 * do_blockdev_direct_IO is going to try to lock the same pages
+	 * again resulting in a deadlock.
+	 * As a side effect get_user_pages_fast might not be safe on the
+	 * frontend pages while they are being shared with the backend,
+	 * because mfn_to_pfn (that ends up being called by GUPF) will
+	 * return the backend pfn rather than the frontend pfn. */
+	ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+	if (ret == 0 && get_phys_to_machine(pfn) == mfn)
+		set_phys_to_machine(pfn, FOREIGN_FRAME(mfn));
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(m2p_add_override);
@@ -752,6 +771,7 @@
 	unsigned long uninitialized_var(address);
 	unsigned level;
 	pte_t *ptep = NULL;
+	int ret = 0;
 
 	pfn = page_to_pfn(page);
 	mfn = get_phys_to_machine(pfn);
@@ -821,6 +841,22 @@
 	} else
 		set_phys_to_machine(pfn, page->index);
 
+	/* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present
+	 * somewhere in this domain, even before being added to the
+	 * m2p_override (see comment above in m2p_add_override).
+	 * If there are no other entries in the m2p_override corresponding
+	 * to this mfn, then remove the FOREIGN_FRAME_BIT from the p2m for
+	 * the original pfn (the one shared by the frontend): the backend
+	 * cannot do any IO on this page anymore because it has been
+	 * unshared. Removing the FOREIGN_FRAME_BIT from the p2m entry of
+	 * the original pfn causes mfn_to_pfn(mfn) to return the frontend
+	 * pfn again. */
+	mfn &= ~FOREIGN_FRAME_BIT;
+	ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+	if (ret == 0 && get_phys_to_machine(pfn) == FOREIGN_FRAME(mfn) &&
+			m2p_find_override(mfn) == NULL)
+		set_phys_to_machine(pfn, mfn);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(m2p_remove_override);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 3ebba07..a4790bf 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -371,7 +371,8 @@
 	populated = xen_populate_chunk(map, memmap.nr_entries,
 			max_pfn, &last_pfn, xen_released_pages);
 
-	extra_pages += (xen_released_pages - populated);
+	xen_released_pages -= populated;
+	extra_pages += xen_released_pages;
 
 	if (last_pfn > max_pfn) {
 		max_pfn = min(MAX_DOMAIN_PAGES, last_pfn);
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 7608559..f973754 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -68,8 +68,8 @@
 
 # Only build variant and/or platform if it includes a Makefile
 
-buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
-buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
+buildvar := $(shell test -e $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
+buildplf := $(shell test -e $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
 
 # Find libgcc.a
 
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 88ecea3..ee2e208 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -83,7 +83,6 @@
 
   _text = .;
   _stext = .;
-  _ftext = .;
 
   .text :
   {
@@ -112,7 +111,7 @@
   EXCEPTION_TABLE(16)
   /* Data section */
 
-  _fdata = .;
+  _sdata = .;
   RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE)
   _edata = .;
 
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index ba150e5..db955179 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -26,11 +26,7 @@
 
 #include <asm/bootparam.h>
 #include <asm/page.h>
-
-/* References to section boundaries */
-
-extern char _ftext, _etext, _fdata, _edata, _rodata_end;
-extern char __init_begin, __init_end;
+#include <asm/sections.h>
 
 /*
  * mem_reserve(start, end, must_exist)
@@ -197,9 +193,9 @@
 			reservedpages++;
 	}
 
-	codesize =  (unsigned long) &_etext - (unsigned long) &_ftext;
-	datasize =  (unsigned long) &_edata - (unsigned long) &_fdata;
-	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
+	codesize =  (unsigned long) _etext - (unsigned long) _stext;
+	datasize =  (unsigned long) _edata - (unsigned long) _sdata;
+	initsize =  (unsigned long) __init_end - (unsigned long) __init_begin;
 
 	printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, "
 	       "%ldk data, %ldk init %ldk highmem)\n",
@@ -237,7 +233,7 @@
 
 void free_initmem(void)
 {
-	free_reserved_mem(&__init_begin, &__init_end);
-	printk("Freeing unused kernel memory: %dk freed\n",
-	       (&__init_end - &__init_begin) >> 10);
+	free_reserved_mem(__init_begin, __init_end);
+	printk("Freeing unused kernel memory: %zuk freed\n",
+	       (__init_end - __init_begin) >> 10);
 }
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 02cf633..e7dee61 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -125,12 +125,8 @@
 
 		blkg->pd[i] = pd;
 		pd->blkg = blkg;
-	}
 
-	/* invoke per-policy init */
-	for (i = 0; i < BLKCG_MAX_POLS; i++) {
-		struct blkcg_policy *pol = blkcg_policy[i];
-
+		/* invoke per-policy init */
 		if (blkcg_policy_enabled(blkg->q, pol))
 			pol->pd_init_fn(blkg);
 	}
@@ -245,10 +241,9 @@
 
 static void blkg_destroy(struct blkcg_gq *blkg)
 {
-	struct request_queue *q = blkg->q;
 	struct blkcg *blkcg = blkg->blkcg;
 
-	lockdep_assert_held(q->queue_lock);
+	lockdep_assert_held(blkg->q->queue_lock);
 	lockdep_assert_held(&blkcg->lock);
 
 	/* Something wrong if we are trying to remove same group twice */
diff --git a/block/blk-core.c b/block/blk-core.c
index 3c923a7..93eb3e4 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -361,9 +361,10 @@
  */
 void blk_drain_queue(struct request_queue *q, bool drain_all)
 {
+	int i;
+
 	while (true) {
 		bool drain = false;
-		int i;
 
 		spin_lock_irq(q->queue_lock);
 
@@ -408,6 +409,18 @@
 			break;
 		msleep(10);
 	}
+
+	/*
+	 * With queue marked dead, any woken up waiter will fail the
+	 * allocation path, so the wakeup chaining is lost and we're
+	 * left with hung waiters. We need to wake up those waiters.
+	 */
+	if (q->request_fn) {
+		spin_lock_irq(q->queue_lock);
+		for (i = 0; i < ARRAY_SIZE(q->rq.wait); i++)
+			wake_up_all(&q->rq.wait[i]);
+		spin_unlock_irq(q->queue_lock);
+	}
 }
 
 /**
@@ -467,7 +480,6 @@
 	/* mark @q DEAD, no new request or merges will be allowed afterwards */
 	mutex_lock(&q->sysfs_lock);
 	queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q);
-
 	spin_lock_irq(lock);
 
 	/*
@@ -485,10 +497,6 @@
 	queue_flag_set(QUEUE_FLAG_NOMERGES, q);
 	queue_flag_set(QUEUE_FLAG_NOXMERGES, q);
 	queue_flag_set(QUEUE_FLAG_DEAD, q);
-
-	if (q->queue_lock != &q->__queue_lock)
-		q->queue_lock = &q->__queue_lock;
-
 	spin_unlock_irq(lock);
 	mutex_unlock(&q->sysfs_lock);
 
@@ -499,6 +507,11 @@
 	del_timer_sync(&q->backing_dev_info.laptop_mode_wb_timer);
 	blk_sync_queue(q);
 
+	spin_lock_irq(lock);
+	if (q->queue_lock != &q->__queue_lock)
+		q->queue_lock = &q->__queue_lock;
+	spin_unlock_irq(lock);
+
 	/* @q is and will stay empty, shutdown and put */
 	blk_put_queue(q);
 }
diff --git a/block/blk-timeout.c b/block/blk-timeout.c
index 7803548..6e4744c 100644
--- a/block/blk-timeout.c
+++ b/block/blk-timeout.c
@@ -197,44 +197,3 @@
 		mod_timer(&q->timeout, expiry);
 }
 
-/**
- * blk_abort_queue -- Abort all request on given queue
- * @queue:	pointer to queue
- *
- */
-void blk_abort_queue(struct request_queue *q)
-{
-	unsigned long flags;
-	struct request *rq, *tmp;
-	LIST_HEAD(list);
-
-	/*
-	 * Not a request based block device, nothing to abort
-	 */
-	if (!q->request_fn)
-		return;
-
-	spin_lock_irqsave(q->queue_lock, flags);
-
-	elv_abort_queue(q);
-
-	/*
-	 * Splice entries to local list, to avoid deadlocking if entries
-	 * get readded to the timeout list by error handling
-	 */
-	list_splice_init(&q->timeout_list, &list);
-
-	list_for_each_entry_safe(rq, tmp, &list, timeout_list)
-		blk_abort_request(rq);
-
-	/*
-	 * Occasionally, blk_abort_request() will return without
-	 * deleting the element from the list. Make sure we add those back
-	 * instead of leaving them on the local stack list.
-	 */
-	list_splice(&list, &q->timeout_list);
-
-	spin_unlock_irqrestore(q->queue_lock, flags);
-
-}
-EXPORT_SYMBOL_GPL(blk_abort_queue);
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 673c977..fb52df97 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -17,8 +17,6 @@
 #include "blk.h"
 #include "blk-cgroup.h"
 
-static struct blkcg_policy blkcg_policy_cfq __maybe_unused;
-
 /*
  * tunables
  */
@@ -418,11 +416,6 @@
 	return pd ? container_of(pd, struct cfq_group, pd) : NULL;
 }
 
-static inline struct cfq_group *blkg_to_cfqg(struct blkcg_gq *blkg)
-{
-	return pd_to_cfqg(blkg_to_pd(blkg, &blkcg_policy_cfq));
-}
-
 static inline struct blkcg_gq *cfqg_to_blkg(struct cfq_group *cfqg)
 {
 	return pd_to_blkg(&cfqg->pd);
@@ -572,6 +565,13 @@
 
 #ifdef CONFIG_CFQ_GROUP_IOSCHED
 
+static struct blkcg_policy blkcg_policy_cfq;
+
+static inline struct cfq_group *blkg_to_cfqg(struct blkcg_gq *blkg)
+{
+	return pd_to_cfqg(blkg_to_pd(blkg, &blkcg_policy_cfq));
+}
+
 static inline void cfqg_get(struct cfq_group *cfqg)
 {
 	return blkg_get(cfqg_to_blkg(cfqg));
@@ -3951,10 +3951,11 @@
 
 	cfq_shutdown_timer_wq(cfqd);
 
-#ifndef CONFIG_CFQ_GROUP_IOSCHED
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+	blkcg_deactivate_policy(q, &blkcg_policy_cfq);
+#else
 	kfree(cfqd->root_group);
 #endif
-	blkcg_deactivate_policy(q, &blkcg_policy_cfq);
 	kfree(cfqd);
 }
 
@@ -4194,14 +4195,15 @@
 #ifdef CONFIG_CFQ_GROUP_IOSCHED
 	if (!cfq_group_idle)
 		cfq_group_idle = 1;
-#else
-		cfq_group_idle = 0;
-#endif
 
 	ret = blkcg_policy_register(&blkcg_policy_cfq);
 	if (ret)
 		return ret;
+#else
+	cfq_group_idle = 0;
+#endif
 
+	ret = -ENOMEM;
 	cfq_pool = KMEM_CACHE(cfq_queue, 0);
 	if (!cfq_pool)
 		goto err_pol_unreg;
@@ -4215,13 +4217,17 @@
 err_free_pool:
 	kmem_cache_destroy(cfq_pool);
 err_pol_unreg:
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkcg_policy_unregister(&blkcg_policy_cfq);
+#endif
 	return ret;
 }
 
 static void __exit cfq_exit(void)
 {
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkcg_policy_unregister(&blkcg_policy_cfq);
+#endif
 	elv_unregister(&iosched_cfq);
 	kmem_cache_destroy(cfq_pool);
 }
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 260fa80e..9a87daa 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -721,11 +721,14 @@
 		break;
 	}
 
+	if (capable(CAP_SYS_RAWIO))
+		return 0;
+
 	/* In particular, rule out all resets and host-specific ioctls.  */
 	printk_ratelimited(KERN_WARNING
 			   "%s: sending ioctl %x to a partition!\n", current->comm, cmd);
 
-	return capable(CAP_SYS_RAWIO) ? 0 : -ENOIOCTLCMD;
+	return -ENOIOCTLCMD;
 }
 EXPORT_SYMBOL(scsi_verify_blk_ioctl);
 
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index a43fa1a..1502c502 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -36,6 +36,7 @@
 #define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator"
 #define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80
 static DEFINE_MUTEX(isolated_cpus_lock);
+static DEFINE_MUTEX(round_robin_lock);
 
 static unsigned long power_saving_mwait_eax;
 
@@ -107,7 +108,7 @@
 	if (!alloc_cpumask_var(&tmp, GFP_KERNEL))
 		return;
 
-	mutex_lock(&isolated_cpus_lock);
+	mutex_lock(&round_robin_lock);
 	cpumask_clear(tmp);
 	for_each_cpu(cpu, pad_busy_cpus)
 		cpumask_or(tmp, tmp, topology_thread_cpumask(cpu));
@@ -116,7 +117,7 @@
 	if (cpumask_empty(tmp))
 		cpumask_andnot(tmp, cpu_online_mask, pad_busy_cpus);
 	if (cpumask_empty(tmp)) {
-		mutex_unlock(&isolated_cpus_lock);
+		mutex_unlock(&round_robin_lock);
 		return;
 	}
 	for_each_cpu(cpu, tmp) {
@@ -131,7 +132,7 @@
 	tsk_in_cpu[tsk_index] = preferred_cpu;
 	cpumask_set_cpu(preferred_cpu, pad_busy_cpus);
 	cpu_weight[preferred_cpu]++;
-	mutex_unlock(&isolated_cpus_lock);
+	mutex_unlock(&round_robin_lock);
 
 	set_cpus_allowed_ptr(current, cpumask_of(preferred_cpu));
 }
diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c
index 5577762..6686b1e 100644
--- a/drivers/acpi/apei/apei-base.c
+++ b/drivers/acpi/apei/apei-base.c
@@ -243,7 +243,7 @@
 	u8 ins = entry->instruction;
 
 	if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)
-		return acpi_os_map_generic_address(&entry->register_region);
+		return apei_map_generic_address(&entry->register_region);
 
 	return 0;
 }
@@ -276,7 +276,7 @@
 	u8 ins = entry->instruction;
 
 	if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)
-		acpi_os_unmap_generic_address(&entry->register_region);
+		apei_unmap_generic_address(&entry->register_region);
 
 	return 0;
 }
@@ -606,6 +606,19 @@
 	return 0;
 }
 
+int apei_map_generic_address(struct acpi_generic_address *reg)
+{
+	int rc;
+	u32 access_bit_width;
+	u64 address;
+
+	rc = apei_check_gar(reg, &address, &access_bit_width);
+	if (rc)
+		return rc;
+	return acpi_os_map_generic_address(reg);
+}
+EXPORT_SYMBOL_GPL(apei_map_generic_address);
+
 /* read GAR in interrupt (including NMI) or process context */
 int apei_read(u64 *val, struct acpi_generic_address *reg)
 {
diff --git a/drivers/acpi/apei/apei-internal.h b/drivers/acpi/apei/apei-internal.h
index cca240a..f220d64 100644
--- a/drivers/acpi/apei/apei-internal.h
+++ b/drivers/acpi/apei/apei-internal.h
@@ -7,6 +7,8 @@
 #define APEI_INTERNAL_H
 
 #include <linux/cper.h>
+#include <linux/acpi.h>
+#include <linux/acpi_io.h>
 
 struct apei_exec_context;
 
@@ -68,6 +70,13 @@
 /* IP has been set in instruction function */
 #define APEI_EXEC_SET_IP	1
 
+int apei_map_generic_address(struct acpi_generic_address *reg);
+
+static inline void apei_unmap_generic_address(struct acpi_generic_address *reg)
+{
+	acpi_os_unmap_generic_address(reg);
+}
+
 int apei_read(u64 *val, struct acpi_generic_address *reg);
 int apei_write(u64 val, struct acpi_generic_address *reg);
 
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 9b3cac0..1599566 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -301,7 +301,7 @@
 	if (!ghes)
 		return ERR_PTR(-ENOMEM);
 	ghes->generic = generic;
-	rc = acpi_os_map_generic_address(&generic->error_status_address);
+	rc = apei_map_generic_address(&generic->error_status_address);
 	if (rc)
 		goto err_free;
 	error_block_length = generic->error_block_length;
@@ -321,7 +321,7 @@
 	return ghes;
 
 err_unmap:
-	acpi_os_unmap_generic_address(&generic->error_status_address);
+	apei_unmap_generic_address(&generic->error_status_address);
 err_free:
 	kfree(ghes);
 	return ERR_PTR(rc);
@@ -330,7 +330,7 @@
 static void ghes_fini(struct ghes *ghes)
 {
 	kfree(ghes->estatus);
-	acpi_os_unmap_generic_address(&ghes->generic->error_status_address);
+	apei_unmap_generic_address(&ghes->generic->error_status_address);
 }
 
 enum {
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index f3decb3..47a8caa 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -224,6 +224,7 @@
 /*
  * Suspend / resume control
  */
+static int acpi_idle_suspend;
 static u32 saved_bm_rld;
 
 static void acpi_idle_bm_rld_save(void)
@@ -242,13 +243,21 @@
 
 int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
 {
+	if (acpi_idle_suspend == 1)
+		return 0;
+
 	acpi_idle_bm_rld_save();
+	acpi_idle_suspend = 1;
 	return 0;
 }
 
 int acpi_processor_resume(struct acpi_device * device)
 {
+	if (acpi_idle_suspend == 0)
+		return 0;
+
 	acpi_idle_bm_rld_restore();
+	acpi_idle_suspend = 0;
 	return 0;
 }
 
@@ -754,6 +763,12 @@
 
 	local_irq_disable();
 
+	if (acpi_idle_suspend) {
+		local_irq_enable();
+		cpu_relax();
+		return -EBUSY;
+	}
+
 	lapic_timer_state_broadcast(pr, cx, 1);
 	kt1 = ktime_get_real();
 	acpi_idle_do_entry(cx);
@@ -823,6 +838,12 @@
 
 	local_irq_disable();
 
+	if (acpi_idle_suspend) {
+		local_irq_enable();
+		cpu_relax();
+		return -EBUSY;
+	}
+
 	if (cx->entry_method != ACPI_CSTATE_FFH) {
 		current_thread_info()->status &= ~TS_POLLING;
 		/*
@@ -907,14 +928,21 @@
 						drv, drv->safe_state_index);
 		} else {
 			local_irq_disable();
-			acpi_safe_halt();
+			if (!acpi_idle_suspend)
+				acpi_safe_halt();
 			local_irq_enable();
-			return -EINVAL;
+			return -EBUSY;
 		}
 	}
 
 	local_irq_disable();
 
+	if (acpi_idle_suspend) {
+		local_irq_enable();
+		cpu_relax();
+		return -EBUSY;
+	}
+
 	if (cx->entry_method != ACPI_CSTATE_FFH) {
 		current_thread_info()->status &= ~TS_POLLING;
 		/*
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index 9f66181..240a244 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -173,7 +173,7 @@
 {
 	int result = 0;
 
-	if (!strncmp(val, "enable", strlen("enable") - 1)) {
+	if (!strncmp(val, "enable", strlen("enable"))) {
 		result = acpi_debug_trace(trace_method_name, trace_debug_level,
 					  trace_debug_layer, 0);
 		if (result)
@@ -181,7 +181,7 @@
 		goto exit;
 	}
 
-	if (!strncmp(val, "disable", strlen("disable") - 1)) {
+	if (!strncmp(val, "disable", strlen("disable"))) {
 		int name = 0;
 		result = acpi_debug_trace((char *)&name, trace_debug_level,
 					  trace_debug_layer, 0);
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index a576575..1e0a9e1 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -558,6 +558,8 @@
 	union acpi_object arg0 = { ACPI_TYPE_INTEGER };
 	struct acpi_object_list args = { 1, &arg0 };
 
+	if (!video->cap._DOS)
+		return 0;
 
 	if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1)
 		return -EINVAL;
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 3239517..ac6a5be 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -4,7 +4,7 @@
  * Arasan Compact Flash host controller source file
  *
  * Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -959,7 +959,7 @@
 
 module_platform_driver(arasan_cf_driver);
 
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
 MODULE_DESCRIPTION("Arasan ATA Compact Flash driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 1b1cbb5..dcb8a6e 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -100,7 +100,7 @@
 	mutex_lock(&deferred_probe_mutex);
 	if (list_empty(&dev->p->deferred_probe)) {
 		dev_dbg(dev, "Added to deferred list\n");
-		list_add(&dev->p->deferred_probe, &deferred_probe_pending_list);
+		list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list);
 	}
 	mutex_unlock(&deferred_probe_mutex);
 }
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index e0fb5b04..9cb845e 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -1031,7 +1031,7 @@
 	dpm_wait_for_children(dev, async);
 
 	if (async_error)
-		return 0;
+		goto Complete;
 
 	pm_runtime_get_noresume(dev);
 	if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
@@ -1040,7 +1040,7 @@
 	if (pm_wakeup_pending()) {
 		pm_runtime_put_sync(dev);
 		async_error = -EBUSY;
-		return 0;
+		goto Complete;
 	}
 
 	device_lock(dev);
@@ -1097,6 +1097,8 @@
 	}
 
 	device_unlock(dev);
+
+ Complete:
 	complete_all(&dev->power.completion);
 
 	if (error) {
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 0bcda48..c89aa01 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -246,11 +246,11 @@
 		map->lock = regmap_lock_mutex;
 		map->unlock = regmap_unlock_mutex;
 	}
-	map->format.buf_size = (config->reg_bits + config->val_bits) / 8;
 	map->format.reg_bytes = DIV_ROUND_UP(config->reg_bits, 8);
 	map->format.pad_bytes = config->pad_bits / 8;
 	map->format.val_bytes = DIV_ROUND_UP(config->val_bits, 8);
-	map->format.buf_size += map->format.pad_bytes;
+	map->format.buf_size = DIV_ROUND_UP(config->reg_bits +
+			config->val_bits + config->pad_bits, 8);
 	map->reg_shift = config->pad_bits % 8;
 	if (config->reg_stride)
 		map->reg_stride = config->reg_stride;
@@ -368,7 +368,7 @@
 
 	ret = regcache_init(map, config);
 	if (ret < 0)
-		goto err_free_workbuf;
+		goto err_debugfs;
 
 	/* Add a devres resource for dev_get_regmap() */
 	m = devres_alloc(dev_get_regmap_release, sizeof(*m), GFP_KERNEL);
@@ -383,7 +383,8 @@
 
 err_cache:
 	regcache_exit(map);
-err_free_workbuf:
+err_debugfs:
+	regmap_debugfs_exit(map);
 	kfree(map->work_buf);
 err_map:
 	kfree(map);
@@ -471,6 +472,7 @@
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(regmap_reinit_cache);
 
 /**
  * regmap_exit(): Free a previously allocated register map
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
index a058842..61ce405 100644
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -139,7 +139,9 @@
 		bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
 		break;
 	case 0x4331:
-		/* BCM4331 workaround is SPROM-related, we put it in sprom.c */
+	case 43431:
+		/* Ext PA lines must be enabled for tx on BCM4331 */
+		bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true);
 		break;
 	case 43224:
 		if (bus->chipinfo.rev == 0) {
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index 9a96f14..c32ebd5 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -232,17 +232,19 @@
 int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
 			  bool enable)
 {
-	struct pci_dev *pdev = pc->core->bus->host_pci;
+	struct pci_dev *pdev;
 	u32 coremask, tmp;
 	int err = 0;
 
-	if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+	if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
 		/* This bcma device is not on a PCI host-bus. So the IRQs are
 		 * not routed through the PCI core.
 		 * So we must not enable routing through the PCI core. */
 		goto out;
 	}
 
+	pdev = pc->core->bus->host_pci;
+
 	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
 	if (err)
 		goto out;
diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c
index c7f9335..f16f42d3 100644
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -579,13 +579,13 @@
 	if (!sprom)
 		return -ENOMEM;
 
-	if (bus->chipinfo.id == 0x4331)
+	if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431)
 		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
 
 	pr_debug("SPROM offset 0x%x\n", offset);
 	bcma_sprom_read(bus, offset, sprom);
 
-	if (bus->chipinfo.id == 0x4331)
+	if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431)
 		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
 
 	err = bcma_sprom_valid(sprom);
diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c
index b5c5ff5..fcb956b 100644
--- a/drivers/block/drbd/drbd_bitmap.c
+++ b/drivers/block/drbd/drbd_bitmap.c
@@ -1475,10 +1475,17 @@
 		first_word = 0;
 		spin_lock_irq(&b->bm_lock);
 	}
-
 	/* last page (respectively only page, for first page == last page) */
 	last_word = MLPP(el >> LN2_BPL);
-	bm_set_full_words_within_one_page(mdev->bitmap, last_page, first_word, last_word);
+
+	/* consider bitmap->bm_bits = 32768, bitmap->bm_number_of_pages = 1. (or multiples).
+	 * ==> e = 32767, el = 32768, last_page = 2,
+	 * and now last_word = 0.
+	 * We do not want to touch last_page in this case,
+	 * as we did not allocate it, it is not present in bitmap->bm_pages.
+	 */
+	if (last_word)
+		bm_set_full_words_within_one_page(mdev->bitmap, last_page, first_word, last_word);
 
 	/* possibly trailing bits.
 	 * example: (e & 63) == 63, el will be e+1.
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index 9c5c849..8e93a6a 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -472,12 +472,17 @@
 		req->rq_state |= RQ_LOCAL_COMPLETED;
 		req->rq_state &= ~RQ_LOCAL_PENDING;
 
-		D_ASSERT(!(req->rq_state & RQ_NET_MASK));
+		if (req->rq_state & RQ_LOCAL_ABORTED) {
+			_req_may_be_done(req, m);
+			break;
+		}
 
 		__drbd_chk_io_error(mdev, false);
 
 	goto_queue_for_net_read:
 
+		D_ASSERT(!(req->rq_state & RQ_NET_MASK));
+
 		/* no point in retrying if there is no good remote data,
 		 * or we have no connection. */
 		if (mdev->state.pdsk != D_UP_TO_DATE) {
@@ -765,6 +770,40 @@
 	return 0 == drbd_bm_count_bits(mdev, sbnr, ebnr);
 }
 
+static void maybe_pull_ahead(struct drbd_conf *mdev)
+{
+	int congested = 0;
+
+	/* If I don't even have good local storage, we can not reasonably try
+	 * to pull ahead of the peer. We also need the local reference to make
+	 * sure mdev->act_log is there.
+	 * Note: caller has to make sure that net_conf is there.
+	 */
+	if (!get_ldev_if_state(mdev, D_UP_TO_DATE))
+		return;
+
+	if (mdev->net_conf->cong_fill &&
+	    atomic_read(&mdev->ap_in_flight) >= mdev->net_conf->cong_fill) {
+		dev_info(DEV, "Congestion-fill threshold reached\n");
+		congested = 1;
+	}
+
+	if (mdev->act_log->used >= mdev->net_conf->cong_extents) {
+		dev_info(DEV, "Congestion-extents threshold reached\n");
+		congested = 1;
+	}
+
+	if (congested) {
+		queue_barrier(mdev); /* last barrier, after mirrored writes */
+
+		if (mdev->net_conf->on_congestion == OC_PULL_AHEAD)
+			_drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL);
+		else  /*mdev->net_conf->on_congestion == OC_DISCONNECT */
+			_drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL);
+	}
+	put_ldev(mdev);
+}
+
 static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, unsigned long start_time)
 {
 	const int rw = bio_rw(bio);
@@ -972,29 +1011,8 @@
 		_req_mod(req, queue_for_send_oos);
 
 	if (remote &&
-	    mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96) {
-		int congested = 0;
-
-		if (mdev->net_conf->cong_fill &&
-		    atomic_read(&mdev->ap_in_flight) >= mdev->net_conf->cong_fill) {
-			dev_info(DEV, "Congestion-fill threshold reached\n");
-			congested = 1;
-		}
-
-		if (mdev->act_log->used >= mdev->net_conf->cong_extents) {
-			dev_info(DEV, "Congestion-extents threshold reached\n");
-			congested = 1;
-		}
-
-		if (congested) {
-			queue_barrier(mdev); /* last barrier, after mirrored writes */
-
-			if (mdev->net_conf->on_congestion == OC_PULL_AHEAD)
-				_drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL);
-			else  /*mdev->net_conf->on_congestion == OC_DISCONNECT */
-				_drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL);
-		}
-	}
+	    mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96)
+		maybe_pull_ahead(mdev);
 
 	spin_unlock_irq(&mdev->req_lock);
 	kfree(b); /* if someone else has beaten us to it... */
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index cce7df3..553f43a 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -671,6 +671,7 @@
 
 	if (drive == current_reqD)
 		drive = current_drive;
+	__cancel_delayed_work(&fd_timeout);
 
 	if (drive < 0 || drive >= N_DRIVE) {
 		delay = 20UL * HZ;
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 264bc77..a8fddeb 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -37,6 +37,7 @@
 #include <linux/kthread.h>
 #include <../drivers/ata/ahci.h>
 #include <linux/export.h>
+#include <linux/debugfs.h>
 #include "mtip32xx.h"
 
 #define HW_CMD_SLOT_SZ		(MTIP_MAX_COMMAND_SLOTS * 32)
@@ -85,6 +86,7 @@
  * allocated in mtip_init().
  */
 static int mtip_major;
+static struct dentry *dfs_parent;
 
 static DEFINE_SPINLOCK(rssd_index_lock);
 static DEFINE_IDA(rssd_index_ida);
@@ -2546,7 +2548,7 @@
 }
 
 /*
- * Sysfs register/status dump.
+ * Sysfs status dump.
  *
  * @dev  Pointer to the device structure, passed by the kernrel.
  * @attr Pointer to the device_attribute structure passed by the kernel.
@@ -2555,71 +2557,6 @@
  * return value
  *	The size, in bytes, of the data copied into buf.
  */
-static ssize_t mtip_hw_show_registers(struct device *dev,
-				struct device_attribute *attr,
-				char *buf)
-{
-	u32 group_allocated;
-	struct driver_data *dd = dev_to_disk(dev)->private_data;
-	int size = 0;
-	int n;
-
-	size += sprintf(&buf[size], "Hardware\n--------\n");
-	size += sprintf(&buf[size], "S ACTive      : [ 0x");
-
-	for (n = dd->slot_groups-1; n >= 0; n--)
-		size += sprintf(&buf[size], "%08X ",
-					 readl(dd->port->s_active[n]));
-
-	size += sprintf(&buf[size], "]\n");
-	size += sprintf(&buf[size], "Command Issue : [ 0x");
-
-	for (n = dd->slot_groups-1; n >= 0; n--)
-		size += sprintf(&buf[size], "%08X ",
-					readl(dd->port->cmd_issue[n]));
-
-	size += sprintf(&buf[size], "]\n");
-	size += sprintf(&buf[size], "Completed     : [ 0x");
-
-	for (n = dd->slot_groups-1; n >= 0; n--)
-		size += sprintf(&buf[size], "%08X ",
-				readl(dd->port->completed[n]));
-
-	size += sprintf(&buf[size], "]\n");
-	size += sprintf(&buf[size], "PORT IRQ STAT : [ 0x%08X ]\n",
-				readl(dd->port->mmio + PORT_IRQ_STAT));
-	size += sprintf(&buf[size], "HOST IRQ STAT : [ 0x%08X ]\n",
-				readl(dd->mmio + HOST_IRQ_STAT));
-	size += sprintf(&buf[size], "\n");
-
-	size += sprintf(&buf[size], "Local\n-----\n");
-	size += sprintf(&buf[size], "Allocated    : [ 0x");
-
-	for (n = dd->slot_groups-1; n >= 0; n--) {
-		if (sizeof(long) > sizeof(u32))
-			group_allocated =
-				dd->port->allocated[n/2] >> (32*(n&1));
-		else
-			group_allocated = dd->port->allocated[n];
-		size += sprintf(&buf[size], "%08X ", group_allocated);
-	}
-	size += sprintf(&buf[size], "]\n");
-
-	size += sprintf(&buf[size], "Commands in Q: [ 0x");
-
-	for (n = dd->slot_groups-1; n >= 0; n--) {
-		if (sizeof(long) > sizeof(u32))
-			group_allocated =
-				dd->port->cmds_to_issue[n/2] >> (32*(n&1));
-		else
-			group_allocated = dd->port->cmds_to_issue[n];
-		size += sprintf(&buf[size], "%08X ", group_allocated);
-	}
-	size += sprintf(&buf[size], "]\n");
-
-	return size;
-}
-
 static ssize_t mtip_hw_show_status(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
@@ -2637,24 +2574,121 @@
 	return size;
 }
 
-static ssize_t mtip_hw_show_flags(struct device *dev,
-				struct device_attribute *attr,
-				char *buf)
+static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
+
+static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf,
+				  size_t len, loff_t *offset)
 {
-	struct driver_data *dd = dev_to_disk(dev)->private_data;
-	int size = 0;
+	struct driver_data *dd =  (struct driver_data *)f->private_data;
+	char buf[MTIP_DFS_MAX_BUF_SIZE];
+	u32 group_allocated;
+	int size = *offset;
+	int n;
 
-	size += sprintf(&buf[size], "Flag in port struct : [ %08lX ]\n",
-							dd->port->flags);
-	size += sprintf(&buf[size], "Flag in dd struct   : [ %08lX ]\n",
-							dd->dd_flag);
+	if (!len || size)
+		return 0;
 
-	return size;
+	if (size < 0)
+		return -EINVAL;
+
+	size += sprintf(&buf[size], "H/ S ACTive      : [ 0x");
+
+	for (n = dd->slot_groups-1; n >= 0; n--)
+		size += sprintf(&buf[size], "%08X ",
+					 readl(dd->port->s_active[n]));
+
+	size += sprintf(&buf[size], "]\n");
+	size += sprintf(&buf[size], "H/ Command Issue : [ 0x");
+
+	for (n = dd->slot_groups-1; n >= 0; n--)
+		size += sprintf(&buf[size], "%08X ",
+					readl(dd->port->cmd_issue[n]));
+
+	size += sprintf(&buf[size], "]\n");
+	size += sprintf(&buf[size], "H/ Completed     : [ 0x");
+
+	for (n = dd->slot_groups-1; n >= 0; n--)
+		size += sprintf(&buf[size], "%08X ",
+				readl(dd->port->completed[n]));
+
+	size += sprintf(&buf[size], "]\n");
+	size += sprintf(&buf[size], "H/ PORT IRQ STAT : [ 0x%08X ]\n",
+				readl(dd->port->mmio + PORT_IRQ_STAT));
+	size += sprintf(&buf[size], "H/ HOST IRQ STAT : [ 0x%08X ]\n",
+				readl(dd->mmio + HOST_IRQ_STAT));
+	size += sprintf(&buf[size], "\n");
+
+	size += sprintf(&buf[size], "L/ Allocated     : [ 0x");
+
+	for (n = dd->slot_groups-1; n >= 0; n--) {
+		if (sizeof(long) > sizeof(u32))
+			group_allocated =
+				dd->port->allocated[n/2] >> (32*(n&1));
+		else
+			group_allocated = dd->port->allocated[n];
+		size += sprintf(&buf[size], "%08X ", group_allocated);
+	}
+	size += sprintf(&buf[size], "]\n");
+
+	size += sprintf(&buf[size], "L/ Commands in Q : [ 0x");
+
+	for (n = dd->slot_groups-1; n >= 0; n--) {
+		if (sizeof(long) > sizeof(u32))
+			group_allocated =
+				dd->port->cmds_to_issue[n/2] >> (32*(n&1));
+		else
+			group_allocated = dd->port->cmds_to_issue[n];
+		size += sprintf(&buf[size], "%08X ", group_allocated);
+	}
+	size += sprintf(&buf[size], "]\n");
+
+	*offset = size <= len ? size : len;
+	size = copy_to_user(ubuf, buf, *offset);
+	if (size)
+		return -EFAULT;
+
+	return *offset;
 }
 
-static DEVICE_ATTR(registers, S_IRUGO, mtip_hw_show_registers, NULL);
-static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
-static DEVICE_ATTR(flags, S_IRUGO, mtip_hw_show_flags, NULL);
+static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf,
+				  size_t len, loff_t *offset)
+{
+	struct driver_data *dd =  (struct driver_data *)f->private_data;
+	char buf[MTIP_DFS_MAX_BUF_SIZE];
+	int size = *offset;
+
+	if (!len || size)
+		return 0;
+
+	if (size < 0)
+		return -EINVAL;
+
+	size += sprintf(&buf[size], "Flag-port : [ %08lX ]\n",
+							dd->port->flags);
+	size += sprintf(&buf[size], "Flag-dd   : [ %08lX ]\n",
+							dd->dd_flag);
+
+	*offset = size <= len ? size : len;
+	size = copy_to_user(ubuf, buf, *offset);
+	if (size)
+		return -EFAULT;
+
+	return *offset;
+}
+
+static const struct file_operations mtip_regs_fops = {
+	.owner  = THIS_MODULE,
+	.open   = simple_open,
+	.read   = mtip_hw_read_registers,
+	.llseek = no_llseek,
+};
+
+static const struct file_operations mtip_flags_fops = {
+	.owner  = THIS_MODULE,
+	.open   = simple_open,
+	.read   = mtip_hw_read_flags,
+	.llseek = no_llseek,
+};
 
 /*
  * Create the sysfs related attributes.
@@ -2671,15 +2705,9 @@
 	if (!kobj || !dd)
 		return -EINVAL;
 
-	if (sysfs_create_file(kobj, &dev_attr_registers.attr))
-		dev_warn(&dd->pdev->dev,
-			"Error creating 'registers' sysfs entry\n");
 	if (sysfs_create_file(kobj, &dev_attr_status.attr))
 		dev_warn(&dd->pdev->dev,
 			"Error creating 'status' sysfs entry\n");
-	if (sysfs_create_file(kobj, &dev_attr_flags.attr))
-		dev_warn(&dd->pdev->dev,
-			"Error creating 'flags' sysfs entry\n");
 	return 0;
 }
 
@@ -2698,13 +2726,39 @@
 	if (!kobj || !dd)
 		return -EINVAL;
 
-	sysfs_remove_file(kobj, &dev_attr_registers.attr);
 	sysfs_remove_file(kobj, &dev_attr_status.attr);
-	sysfs_remove_file(kobj, &dev_attr_flags.attr);
 
 	return 0;
 }
 
+static int mtip_hw_debugfs_init(struct driver_data *dd)
+{
+	if (!dfs_parent)
+		return -1;
+
+	dd->dfs_node = debugfs_create_dir(dd->disk->disk_name, dfs_parent);
+	if (IS_ERR_OR_NULL(dd->dfs_node)) {
+		dev_warn(&dd->pdev->dev,
+			"Error creating node %s under debugfs\n",
+						dd->disk->disk_name);
+		dd->dfs_node = NULL;
+		return -1;
+	}
+
+	debugfs_create_file("flags", S_IRUGO, dd->dfs_node, dd,
+							&mtip_flags_fops);
+	debugfs_create_file("registers", S_IRUGO, dd->dfs_node, dd,
+							&mtip_regs_fops);
+
+	return 0;
+}
+
+static void mtip_hw_debugfs_exit(struct driver_data *dd)
+{
+	debugfs_remove_recursive(dd->dfs_node);
+}
+
+
 /*
  * Perform any init/resume time hardware setup
  *
@@ -3730,6 +3784,7 @@
 		mtip_hw_sysfs_init(dd, kobj);
 		kobject_put(kobj);
 	}
+	mtip_hw_debugfs_init(dd);
 
 	if (dd->mtip_svc_handler) {
 		set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag);
@@ -3755,6 +3810,8 @@
 	return rv;
 
 kthread_run_error:
+	mtip_hw_debugfs_exit(dd);
+
 	/* Delete our gendisk. This also removes the device from /dev */
 	del_gendisk(dd->disk);
 
@@ -3805,6 +3862,7 @@
 			kobject_put(kobj);
 		}
 	}
+	mtip_hw_debugfs_exit(dd);
 
 	/*
 	 * Delete our gendisk structure. This also removes the device
@@ -4152,10 +4210,20 @@
 	}
 	mtip_major = error;
 
+	if (!dfs_parent) {
+		dfs_parent = debugfs_create_dir("rssd", NULL);
+		if (IS_ERR_OR_NULL(dfs_parent)) {
+			printk(KERN_WARNING "Error creating debugfs parent\n");
+			dfs_parent = NULL;
+		}
+	}
+
 	/* Register our PCI operations. */
 	error = pci_register_driver(&mtip_pci_driver);
-	if (error)
+	if (error) {
+		debugfs_remove(dfs_parent);
 		unregister_blkdev(mtip_major, MTIP_DRV_NAME);
+	}
 
 	return error;
 }
@@ -4172,6 +4240,8 @@
  */
 static void __exit mtip_exit(void)
 {
+	debugfs_remove_recursive(dfs_parent);
+
 	/* Release the allocated major block device number. */
 	unregister_blkdev(mtip_major, MTIP_DRV_NAME);
 
diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h
index b2c88da..f51fc23 100644
--- a/drivers/block/mtip32xx/mtip32xx.h
+++ b/drivers/block/mtip32xx/mtip32xx.h
@@ -26,7 +26,6 @@
 #include <linux/ata.h>
 #include <linux/interrupt.h>
 #include <linux/genhd.h>
-#include <linux/version.h>
 
 /* Offset of Subsystem Device ID in pci confoguration space */
 #define PCI_SUBSYSTEM_DEVICEID	0x2E
@@ -111,6 +110,8 @@
  #define dbg_printk(format, arg...)
 #endif
 
+#define MTIP_DFS_MAX_BUF_SIZE 1024
+
 #define __force_bit2int (unsigned int __force)
 
 enum {
@@ -447,6 +448,8 @@
 	unsigned long dd_flag; /* NOTE: use atomic bit operations on this */
 
 	struct task_struct *mtip_svc_handler; /* task_struct of svc thd */
+
+	struct dentry *dfs_node;
 };
 
 #endif
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index aa27120..9a72277 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -513,6 +513,44 @@
 	}
 }
 
+struct mm_plug_cb {
+	struct blk_plug_cb cb;
+	struct cardinfo *card;
+};
+
+static void mm_unplug(struct blk_plug_cb *cb)
+{
+	struct mm_plug_cb *mmcb = container_of(cb, struct mm_plug_cb, cb);
+
+	spin_lock_irq(&mmcb->card->lock);
+	activate(mmcb->card);
+	spin_unlock_irq(&mmcb->card->lock);
+	kfree(mmcb);
+}
+
+static int mm_check_plugged(struct cardinfo *card)
+{
+	struct blk_plug *plug = current->plug;
+	struct mm_plug_cb *mmcb;
+
+	if (!plug)
+		return 0;
+
+	list_for_each_entry(mmcb, &plug->cb_list, cb.list) {
+		if (mmcb->cb.callback == mm_unplug && mmcb->card == card)
+			return 1;
+	}
+	/* Not currently on the callback list */
+	mmcb = kmalloc(sizeof(*mmcb), GFP_ATOMIC);
+	if (!mmcb)
+		return 0;
+
+	mmcb->card = card;
+	mmcb->cb.callback = mm_unplug;
+	list_add(&mmcb->cb.list, &plug->cb_list);
+	return 1;
+}
+
 static void mm_make_request(struct request_queue *q, struct bio *bio)
 {
 	struct cardinfo *card = q->queuedata;
@@ -523,6 +561,8 @@
 	*card->biotail = bio;
 	bio->bi_next = NULL;
 	card->biotail = &bio->bi_next;
+	if (bio->bi_rw & REQ_SYNC || !mm_check_plugged(card))
+		activate(card);
 	spin_unlock_irq(&card->lock);
 
 	return;
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index 773cf27..9ad3b5e 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -257,6 +257,7 @@
 		break;
 	case BLKIF_OP_DISCARD:
 		dst->u.discard.flag = src->u.discard.flag;
+		dst->u.discard.id = src->u.discard.id;
 		dst->u.discard.sector_number = src->u.discard.sector_number;
 		dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
 		break;
@@ -287,6 +288,7 @@
 		break;
 	case BLKIF_OP_DISCARD:
 		dst->u.discard.flag = src->u.discard.flag;
+		dst->u.discard.id = src->u.discard.id;
 		dst->u.discard.sector_number = src->u.discard.sector_number;
 		dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
 		break;
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 60eed4b..e4fb337 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -141,14 +141,36 @@
 	return free;
 }
 
-static void add_id_to_freelist(struct blkfront_info *info,
+static int add_id_to_freelist(struct blkfront_info *info,
 			       unsigned long id)
 {
+	if (info->shadow[id].req.u.rw.id != id)
+		return -EINVAL;
+	if (info->shadow[id].request == NULL)
+		return -EINVAL;
 	info->shadow[id].req.u.rw.id  = info->shadow_free;
 	info->shadow[id].request = NULL;
 	info->shadow_free = id;
+	return 0;
 }
 
+static const char *op_name(int op)
+{
+	static const char *const names[] = {
+		[BLKIF_OP_READ] = "read",
+		[BLKIF_OP_WRITE] = "write",
+		[BLKIF_OP_WRITE_BARRIER] = "barrier",
+		[BLKIF_OP_FLUSH_DISKCACHE] = "flush",
+		[BLKIF_OP_DISCARD] = "discard" };
+
+	if (op < 0 || op >= ARRAY_SIZE(names))
+		return "unknown";
+
+	if (!names[op])
+		return "reserved";
+
+	return names[op];
+}
 static int xlbd_reserve_minors(unsigned int minor, unsigned int nr)
 {
 	unsigned int end = minor + nr;
@@ -746,20 +768,36 @@
 
 		bret = RING_GET_RESPONSE(&info->ring, i);
 		id   = bret->id;
+		/*
+		 * The backend has messed up and given us an id that we would
+		 * never have given to it (we stamp it up to BLK_RING_SIZE -
+		 * look in get_id_from_freelist.
+		 */
+		if (id >= BLK_RING_SIZE) {
+			WARN(1, "%s: response to %s has incorrect id (%ld)\n",
+			     info->gd->disk_name, op_name(bret->operation), id);
+			/* We can't safely get the 'struct request' as
+			 * the id is busted. */
+			continue;
+		}
 		req  = info->shadow[id].request;
 
 		if (bret->operation != BLKIF_OP_DISCARD)
 			blkif_completion(&info->shadow[id]);
 
-		add_id_to_freelist(info, id);
+		if (add_id_to_freelist(info, id)) {
+			WARN(1, "%s: response to %s (id %ld) couldn't be recycled!\n",
+			     info->gd->disk_name, op_name(bret->operation), id);
+			continue;
+		}
 
 		error = (bret->status == BLKIF_RSP_OKAY) ? 0 : -EIO;
 		switch (bret->operation) {
 		case BLKIF_OP_DISCARD:
 			if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
 				struct request_queue *rq = info->rq;
-				printk(KERN_WARNING "blkfront: %s: discard op failed\n",
-					   info->gd->disk_name);
+				printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+					   info->gd->disk_name, op_name(bret->operation));
 				error = -EOPNOTSUPP;
 				info->feature_discard = 0;
 				info->feature_secdiscard = 0;
@@ -771,18 +809,14 @@
 		case BLKIF_OP_FLUSH_DISKCACHE:
 		case BLKIF_OP_WRITE_BARRIER:
 			if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
-				printk(KERN_WARNING "blkfront: %s: write %s op failed\n",
-				       info->flush_op == BLKIF_OP_WRITE_BARRIER ?
-				       "barrier" :  "flush disk cache",
-				       info->gd->disk_name);
+				printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+				       info->gd->disk_name, op_name(bret->operation));
 				error = -EOPNOTSUPP;
 			}
 			if (unlikely(bret->status == BLKIF_RSP_ERROR &&
 				     info->shadow[id].req.u.rw.nr_segments == 0)) {
-				printk(KERN_WARNING "blkfront: %s: empty write %s op failed\n",
-				       info->flush_op == BLKIF_OP_WRITE_BARRIER ?
-				       "barrier" :  "flush disk cache",
-				       info->gd->disk_name);
+				printk(KERN_WARNING "blkfront: %s: empty %s op failed\n",
+				       info->gd->disk_name, op_name(bret->operation));
 				error = -EOPNOTSUPP;
 			}
 			if (unlikely(error)) {
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index ad591bd..10308cd 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -63,6 +63,7 @@
 
 	/* Atheros AR3011 with sflash firmware*/
 	{ USB_DEVICE(0x0CF3, 0x3002) },
+	{ USB_DEVICE(0x0CF3, 0xE019) },
 	{ USB_DEVICE(0x13d3, 0x3304) },
 	{ USB_DEVICE(0x0930, 0x0215) },
 	{ USB_DEVICE(0x0489, 0xE03D) },
@@ -77,6 +78,7 @@
 	{ USB_DEVICE(0x04CA, 0x3005) },
 	{ USB_DEVICE(0x13d3, 0x3362) },
 	{ USB_DEVICE(0x0CF3, 0xE004) },
+	{ USB_DEVICE(0x0930, 0x0219) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -101,6 +103,7 @@
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index 94f2d651..27068d1 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -136,7 +136,7 @@
 
 void btmrvl_interrupt(struct btmrvl_private *priv);
 
-void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
+bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
 int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb);
 
 int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd);
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 681ca9d..dc304de 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -44,23 +44,33 @@
 }
 EXPORT_SYMBOL_GPL(btmrvl_interrupt);
 
-void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
+bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
 {
 	struct hci_event_hdr *hdr = (void *) skb->data;
 	struct hci_ev_cmd_complete *ec;
-	u16 opcode, ocf;
+	u16 opcode, ocf, ogf;
 
 	if (hdr->evt == HCI_EV_CMD_COMPLETE) {
 		ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE);
 		opcode = __le16_to_cpu(ec->opcode);
 		ocf = hci_opcode_ocf(opcode);
+		ogf = hci_opcode_ogf(opcode);
+
 		if (ocf == BT_CMD_MODULE_CFG_REQ &&
 					priv->btmrvl_dev.sendcmdflag) {
 			priv->btmrvl_dev.sendcmdflag = false;
 			priv->adapter->cmd_complete = true;
 			wake_up_interruptible(&priv->adapter->cmd_wait_q);
 		}
+
+		if (ogf == OGF) {
+			BT_DBG("vendor event skipped: ogf 0x%4.4x", ogf);
+			kfree_skb(skb);
+			return false;
+		}
 	}
+
+	return true;
 }
 EXPORT_SYMBOL_GPL(btmrvl_check_evtpkt);
 
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index a853244..0cd61d9 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -562,10 +562,12 @@
 		skb_put(skb, buf_len);
 		skb_pull(skb, SDIO_HEADER_LEN);
 
-		if (type == HCI_EVENT_PKT)
-			btmrvl_check_evtpkt(priv, skb);
+		if (type == HCI_EVENT_PKT) {
+			if (btmrvl_check_evtpkt(priv, skb))
+				hci_recv_frame(skb);
+		} else
+			hci_recv_frame(skb);
 
-		hci_recv_frame(skb);
 		hdev->stat.byte_rx += buf_len;
 		break;
 
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c9463af..83ebb24 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -125,6 +125,7 @@
 
 	/* Atheros 3011 with sflash firmware */
 	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
@@ -139,6 +140,7 @@
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
index f518b99..731c904 100644
--- a/drivers/char/hw_random/atmel-rng.c
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -34,8 +34,15 @@
 	u32 *data = buf;
 
 	/* data ready? */
-	if (readl(trng->base + TRNG_ODATA) & 1) {
+	if (readl(trng->base + TRNG_ISR) & 1) {
 		*data = readl(trng->base + TRNG_ODATA);
+		/*
+		  ensure data ready is only set again AFTER the next data
+		  word is ready in case it got set between checking ISR
+		  and reading ODATA, so we don't risk re-reading the
+		  same word
+		*/
+		readl(trng->base + TRNG_ISR);
 		return 4;
 	} else
 		return 0;
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 4864407..3f99b9099 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -34,4 +34,11 @@
 	  clk_flags, clk_prepare_count, clk_enable_count &
 	  clk_notifier_count.
 
+config COMMON_CLK_WM831X
+	tristate "Clock driver for WM831x/2x PMICs"
+	depends on MFD_WM831X
+	---help---
+          Supports the clocking subsystem of the WM831x/2x series of
+	  PMICs from Wolfson Microlectronics.
+
 endmenu
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index b9a5158..02ffdf6 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -1,7 +1,13 @@
-
+# common clock types
 obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-fixed-rate.o clk-gate.o \
 				   clk-mux.o clk-divider.o clk-fixed-factor.o
 # SoCs specific
+obj-$(CONFIG_ARCH_HIGHBANK)	+= clk-highbank.o
 obj-$(CONFIG_ARCH_MXS)		+= mxs/
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
+obj-$(CONFIG_ARCH_U300)		+= clk-u300.o
+obj-$(CONFIG_ARCH_INTEGRATOR)	+= versatile/
+
+# Chip specific
+obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 8ea11b44..a9204c6 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -30,18 +30,89 @@
 #define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
 
 #define div_mask(d)	((1 << (d->width)) - 1)
+#define is_power_of_two(i)	!(i & ~i)
+
+static unsigned int _get_table_maxdiv(const struct clk_div_table *table)
+{
+	unsigned int maxdiv = 0;
+	const struct clk_div_table *clkt;
+
+	for (clkt = table; clkt->div; clkt++)
+		if (clkt->div > maxdiv)
+			maxdiv = clkt->div;
+	return maxdiv;
+}
+
+static unsigned int _get_maxdiv(struct clk_divider *divider)
+{
+	if (divider->flags & CLK_DIVIDER_ONE_BASED)
+		return div_mask(divider);
+	if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+		return 1 << div_mask(divider);
+	if (divider->table)
+		return _get_table_maxdiv(divider->table);
+	return div_mask(divider) + 1;
+}
+
+static unsigned int _get_table_div(const struct clk_div_table *table,
+							unsigned int val)
+{
+	const struct clk_div_table *clkt;
+
+	for (clkt = table; clkt->div; clkt++)
+		if (clkt->val == val)
+			return clkt->div;
+	return 0;
+}
+
+static unsigned int _get_div(struct clk_divider *divider, unsigned int val)
+{
+	if (divider->flags & CLK_DIVIDER_ONE_BASED)
+		return val;
+	if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+		return 1 << val;
+	if (divider->table)
+		return _get_table_div(divider->table, val);
+	return val + 1;
+}
+
+static unsigned int _get_table_val(const struct clk_div_table *table,
+							unsigned int div)
+{
+	const struct clk_div_table *clkt;
+
+	for (clkt = table; clkt->div; clkt++)
+		if (clkt->div == div)
+			return clkt->val;
+	return 0;
+}
+
+static unsigned int _get_val(struct clk_divider *divider, u8 div)
+{
+	if (divider->flags & CLK_DIVIDER_ONE_BASED)
+		return div;
+	if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+		return __ffs(div);
+	if (divider->table)
+		return  _get_table_val(divider->table, div);
+	return div - 1;
+}
 
 static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
 	struct clk_divider *divider = to_clk_divider(hw);
-	unsigned int div;
+	unsigned int div, val;
 
-	div = readl(divider->reg) >> divider->shift;
-	div &= div_mask(divider);
+	val = readl(divider->reg) >> divider->shift;
+	val &= div_mask(divider);
 
-	if (!(divider->flags & CLK_DIVIDER_ONE_BASED))
-		div++;
+	div = _get_div(divider, val);
+	if (!div) {
+		WARN(1, "%s: Invalid divisor for clock %s\n", __func__,
+						__clk_get_name(hw->clk));
+		return parent_rate;
+	}
 
 	return parent_rate / div;
 }
@@ -52,6 +123,26 @@
  */
 #define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1)
 
+static bool _is_valid_table_div(const struct clk_div_table *table,
+							 unsigned int div)
+{
+	const struct clk_div_table *clkt;
+
+	for (clkt = table; clkt->div; clkt++)
+		if (clkt->div == div)
+			return true;
+	return false;
+}
+
+static bool _is_valid_div(struct clk_divider *divider, unsigned int div)
+{
+	if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+		return is_power_of_two(div);
+	if (divider->table)
+		return _is_valid_table_div(divider->table, div);
+	return true;
+}
+
 static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 		unsigned long *best_parent_rate)
 {
@@ -62,10 +153,7 @@
 	if (!rate)
 		rate = 1;
 
-	maxdiv = (1 << divider->width);
-
-	if (divider->flags & CLK_DIVIDER_ONE_BASED)
-		maxdiv--;
+	maxdiv = _get_maxdiv(divider);
 
 	if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
 		parent_rate = *best_parent_rate;
@@ -82,6 +170,8 @@
 	maxdiv = min(ULONG_MAX / rate, maxdiv);
 
 	for (i = 1; i <= maxdiv; i++) {
+		if (!_is_valid_div(divider, i))
+			continue;
 		parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
 				MULT_ROUND_UP(rate, i));
 		now = parent_rate / i;
@@ -93,9 +183,7 @@
 	}
 
 	if (!bestdiv) {
-		bestdiv = (1 << divider->width);
-		if (divider->flags & CLK_DIVIDER_ONE_BASED)
-			bestdiv--;
+		bestdiv = _get_maxdiv(divider);
 		*best_parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), 1);
 	}
 
@@ -115,24 +203,22 @@
 				unsigned long parent_rate)
 {
 	struct clk_divider *divider = to_clk_divider(hw);
-	unsigned int div;
+	unsigned int div, value;
 	unsigned long flags = 0;
 	u32 val;
 
 	div = parent_rate / rate;
+	value = _get_val(divider, div);
 
-	if (!(divider->flags & CLK_DIVIDER_ONE_BASED))
-		div--;
-
-	if (div > div_mask(divider))
-		div = div_mask(divider);
+	if (value > div_mask(divider))
+		value = div_mask(divider);
 
 	if (divider->lock)
 		spin_lock_irqsave(divider->lock, flags);
 
 	val = readl(divider->reg);
 	val &= ~(div_mask(divider) << divider->shift);
-	val |= div << divider->shift;
+	val |= value << divider->shift;
 	writel(val, divider->reg);
 
 	if (divider->lock)
@@ -148,6 +234,47 @@
 };
 EXPORT_SYMBOL_GPL(clk_divider_ops);
 
+static struct clk *_register_divider(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_divider_flags, const struct clk_div_table *table,
+		spinlock_t *lock)
+{
+	struct clk_divider *div;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	/* allocate the divider */
+	div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL);
+	if (!div) {
+		pr_err("%s: could not allocate divider clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	init.name = name;
+	init.ops = &clk_divider_ops;
+	init.flags = flags | CLK_IS_BASIC;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	/* struct clk_divider assignments */
+	div->reg = reg;
+	div->shift = shift;
+	div->width = width;
+	div->flags = clk_divider_flags;
+	div->lock = lock;
+	div->hw.init = &init;
+	div->table = table;
+
+	/* register the clock */
+	clk = clk_register(dev, &div->hw);
+
+	if (IS_ERR(clk))
+		kfree(div);
+
+	return clk;
+}
+
 /**
  * clk_register_divider - register a divider clock with the clock framework
  * @dev: device registering this clock
@@ -165,36 +292,30 @@
 		void __iomem *reg, u8 shift, u8 width,
 		u8 clk_divider_flags, spinlock_t *lock)
 {
-	struct clk_divider *div;
-	struct clk *clk;
-	struct clk_init_data init;
+	return _register_divider(dev, name, parent_name, flags, reg, shift,
+			width, clk_divider_flags, NULL, lock);
+}
 
-	/* allocate the divider */
-	div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL);
-	if (!div) {
-		pr_err("%s: could not allocate divider clk\n", __func__);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	init.name = name;
-	init.ops = &clk_divider_ops;
-	init.flags = flags;
-	init.parent_names = (parent_name ? &parent_name: NULL);
-	init.num_parents = (parent_name ? 1 : 0);
-
-	/* struct clk_divider assignments */
-	div->reg = reg;
-	div->shift = shift;
-	div->width = width;
-	div->flags = clk_divider_flags;
-	div->lock = lock;
-	div->hw.init = &init;
-
-	/* register the clock */
-	clk = clk_register(dev, &div->hw);
-
-	if (IS_ERR(clk))
-		kfree(div);
-
-	return clk;
+/**
+ * clk_register_divider_table - register a table based divider clock with
+ * the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @table: array of divider/value pairs ending with a div set to 0
+ * @lock: shared register lock for this clock
+ */
+struct clk *clk_register_divider_table(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_divider_flags, const struct clk_div_table *table,
+		spinlock_t *lock)
+{
+	return _register_divider(dev, name, parent_name, flags, reg, shift,
+			width, clk_divider_flags, table, lock);
 }
diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
index c8c003e..a489985 100644
--- a/drivers/clk/clk-fixed-factor.c
+++ b/drivers/clk/clk-fixed-factor.c
@@ -82,7 +82,7 @@
 
 	init.name = name;
 	init.ops = &clk_fixed_factor_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = &parent_name;
 	init.num_parents = 1;
 
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index cbd2462..f5ec0ee 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/err.h>
+#include <linux/of.h>
 
 /*
  * DOC: basic fixed-rate clock that cannot gate
@@ -63,7 +64,7 @@
 
 	init.name = name;
 	init.ops = &clk_fixed_rate_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = (parent_name ? &parent_name: NULL);
 	init.num_parents = (parent_name ? 1 : 0);
 
@@ -79,3 +80,25 @@
 
 	return clk;
 }
+
+#ifdef CONFIG_OF
+/**
+ * of_fixed_clk_setup() - Setup function for simple fixed rate clock
+ */
+void __init of_fixed_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	u32 rate;
+
+	if (of_property_read_u32(node, "clock-frequency", &rate))
+		return;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, rate);
+	if (clk)
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+EXPORT_SYMBOL_GPL(of_fixed_clk_setup);
+#endif
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 578465e0..15114fe 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -130,7 +130,7 @@
 
 	init.name = name;
 	init.ops = &clk_gate_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = (parent_name ? &parent_name: NULL);
 	init.num_parents = (parent_name ? 1 : 0);
 
diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c
new file mode 100644
index 0000000..52fecad
--- /dev/null
+++ b/drivers/clk/clk-highbank.c
@@ -0,0 +1,346 @@
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+extern void __iomem *sregs_base;
+
+#define HB_PLL_LOCK_500		0x20000000
+#define HB_PLL_LOCK		0x10000000
+#define HB_PLL_DIVF_SHIFT	20
+#define HB_PLL_DIVF_MASK	0x0ff00000
+#define HB_PLL_DIVQ_SHIFT	16
+#define HB_PLL_DIVQ_MASK	0x00070000
+#define HB_PLL_DIVR_SHIFT	8
+#define HB_PLL_DIVR_MASK	0x00001f00
+#define HB_PLL_RANGE_SHIFT	4
+#define HB_PLL_RANGE_MASK	0x00000070
+#define HB_PLL_BYPASS		0x00000008
+#define HB_PLL_RESET		0x00000004
+#define HB_PLL_EXT_BYPASS	0x00000002
+#define HB_PLL_EXT_ENA		0x00000001
+
+#define HB_PLL_VCO_MIN_FREQ	2133000000
+#define HB_PLL_MAX_FREQ		HB_PLL_VCO_MIN_FREQ
+#define HB_PLL_MIN_FREQ		(HB_PLL_VCO_MIN_FREQ / 64)
+
+#define HB_A9_BCLK_DIV_MASK	0x00000006
+#define HB_A9_BCLK_DIV_SHIFT	1
+#define HB_A9_PCLK_DIV		0x00000001
+
+struct hb_clk {
+        struct clk_hw	hw;
+	void __iomem	*reg;
+	char *parent_name;
+};
+#define to_hb_clk(p) container_of(p, struct hb_clk, hw)
+
+static int clk_pll_prepare(struct clk_hw *hwclk)
+	{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 reg;
+
+	reg = readl(hbclk->reg);
+	reg &= ~HB_PLL_RESET;
+	writel(reg, hbclk->reg);
+
+	while ((readl(hbclk->reg) & HB_PLL_LOCK) == 0)
+		;
+	while ((readl(hbclk->reg) & HB_PLL_LOCK_500) == 0)
+		;
+
+	return 0;
+}
+
+static void clk_pll_unprepare(struct clk_hw *hwclk)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 reg;
+
+	reg = readl(hbclk->reg);
+	reg |= HB_PLL_RESET;
+	writel(reg, hbclk->reg);
+}
+
+static int clk_pll_enable(struct clk_hw *hwclk)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 reg;
+
+	reg = readl(hbclk->reg);
+	reg |= HB_PLL_EXT_ENA;
+	writel(reg, hbclk->reg);
+
+	return 0;
+}
+
+static void clk_pll_disable(struct clk_hw *hwclk)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 reg;
+
+	reg = readl(hbclk->reg);
+	reg &= ~HB_PLL_EXT_ENA;
+	writel(reg, hbclk->reg);
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hwclk,
+					 unsigned long parent_rate)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	unsigned long divf, divq, vco_freq, reg;
+
+	reg = readl(hbclk->reg);
+	if (reg & HB_PLL_EXT_BYPASS)
+		return parent_rate;
+
+	divf = (reg & HB_PLL_DIVF_MASK) >> HB_PLL_DIVF_SHIFT;
+	divq = (reg & HB_PLL_DIVQ_MASK) >> HB_PLL_DIVQ_SHIFT;
+	vco_freq = parent_rate * (divf + 1);
+
+	return vco_freq / (1 << divq);
+}
+
+static void clk_pll_calc(unsigned long rate, unsigned long ref_freq,
+			u32 *pdivq, u32 *pdivf)
+{
+	u32 divq, divf;
+	unsigned long vco_freq;
+
+	if (rate < HB_PLL_MIN_FREQ)
+		rate = HB_PLL_MIN_FREQ;
+	if (rate > HB_PLL_MAX_FREQ)
+		rate = HB_PLL_MAX_FREQ;
+
+	for (divq = 1; divq <= 6; divq++) {
+		if ((rate * (1 << divq)) >= HB_PLL_VCO_MIN_FREQ)
+			break;
+	}
+
+	vco_freq = rate * (1 << divq);
+	divf = (vco_freq + (ref_freq / 2)) / ref_freq;
+	divf--;
+
+	*pdivq = divq;
+	*pdivf = divf;
+}
+
+static long clk_pll_round_rate(struct clk_hw *hwclk, unsigned long rate,
+			       unsigned long *parent_rate)
+{
+	u32 divq, divf;
+	unsigned long ref_freq = *parent_rate;
+
+	clk_pll_calc(rate, ref_freq, &divq, &divf);
+
+	return (ref_freq * (divf + 1)) / (1 << divq);
+}
+
+static int clk_pll_set_rate(struct clk_hw *hwclk, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 divq, divf;
+	u32 reg;
+
+	clk_pll_calc(rate, parent_rate, &divq, &divf);
+
+	reg = readl(hbclk->reg);
+	if (divf != ((reg & HB_PLL_DIVF_MASK) >> HB_PLL_DIVF_SHIFT)) {
+		/* Need to re-lock PLL, so put it into bypass mode */
+		reg |= HB_PLL_EXT_BYPASS;
+		writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
+
+		writel(reg | HB_PLL_RESET, hbclk->reg);
+		reg &= ~(HB_PLL_DIVF_MASK | HB_PLL_DIVQ_MASK);
+		reg |= (divf << HB_PLL_DIVF_SHIFT) | (divq << HB_PLL_DIVQ_SHIFT);
+		writel(reg | HB_PLL_RESET, hbclk->reg);
+		writel(reg, hbclk->reg);
+
+		while ((readl(hbclk->reg) & HB_PLL_LOCK) == 0)
+			;
+		while ((readl(hbclk->reg) & HB_PLL_LOCK_500) == 0)
+			;
+		reg |= HB_PLL_EXT_ENA;
+		reg &= ~HB_PLL_EXT_BYPASS;
+	} else {
+		reg &= ~HB_PLL_DIVQ_MASK;
+		reg |= divq << HB_PLL_DIVQ_SHIFT;
+	}
+	writel(reg, hbclk->reg);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pll_ops = {
+	.prepare = clk_pll_prepare,
+	.unprepare = clk_pll_unprepare,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+	.recalc_rate = clk_pll_recalc_rate,
+	.round_rate = clk_pll_round_rate,
+	.set_rate = clk_pll_set_rate,
+};
+
+static unsigned long clk_cpu_periphclk_recalc_rate(struct clk_hw *hwclk,
+						   unsigned long parent_rate)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 div = (readl(hbclk->reg) & HB_A9_PCLK_DIV) ? 8 : 4;
+	return parent_rate / div;
+}
+
+static const struct clk_ops a9periphclk_ops = {
+	.recalc_rate = clk_cpu_periphclk_recalc_rate,
+};
+
+static unsigned long clk_cpu_a9bclk_recalc_rate(struct clk_hw *hwclk,
+						unsigned long parent_rate)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 div = (readl(hbclk->reg) & HB_A9_BCLK_DIV_MASK) >> HB_A9_BCLK_DIV_SHIFT;
+
+	return parent_rate / (div + 2);
+}
+
+static const struct clk_ops a9bclk_ops = {
+	.recalc_rate = clk_cpu_a9bclk_recalc_rate,
+};
+
+static unsigned long clk_periclk_recalc_rate(struct clk_hw *hwclk,
+					     unsigned long parent_rate)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 div;
+
+	div = readl(hbclk->reg) & 0x1f;
+	div++;
+	div *= 2;
+
+	return parent_rate / div;
+}
+
+static long clk_periclk_round_rate(struct clk_hw *hwclk, unsigned long rate,
+				   unsigned long *parent_rate)
+{
+	u32 div;
+
+	div = *parent_rate / rate;
+	div++;
+	div &= ~0x1;
+
+	return *parent_rate / div;
+}
+
+static int clk_periclk_set_rate(struct clk_hw *hwclk, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 div;
+
+	div = parent_rate / rate;
+	if (div & 0x1)
+		return -EINVAL;
+
+	writel(div >> 1, hbclk->reg);
+	return 0;
+}
+
+static const struct clk_ops periclk_ops = {
+	.recalc_rate = clk_periclk_recalc_rate,
+	.round_rate = clk_periclk_round_rate,
+	.set_rate = clk_periclk_set_rate,
+};
+
+static __init struct clk *hb_clk_init(struct device_node *node, const struct clk_ops *ops)
+{
+	u32 reg;
+	struct clk *clk;
+	struct hb_clk *hb_clk;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	struct clk_init_data init;
+	int rc;
+
+	rc = of_property_read_u32(node, "reg", &reg);
+	if (WARN_ON(rc))
+		return NULL;
+
+	hb_clk = kzalloc(sizeof(*hb_clk), GFP_KERNEL);
+	if (WARN_ON(!hb_clk))
+		return NULL;
+
+	hb_clk->reg = sregs_base + reg;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	init.name = clk_name;
+	init.ops = ops;
+	init.flags = 0;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	hb_clk->hw.init = &init;
+
+	clk = clk_register(NULL, &hb_clk->hw);
+	if (WARN_ON(IS_ERR(clk))) {
+		kfree(hb_clk);
+		return NULL;
+	}
+	rc = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	return clk;
+}
+
+static void __init hb_pll_init(struct device_node *node)
+{
+	hb_clk_init(node, &clk_pll_ops);
+}
+
+static void __init hb_a9periph_init(struct device_node *node)
+{
+	hb_clk_init(node, &a9periphclk_ops);
+}
+
+static void __init hb_a9bus_init(struct device_node *node)
+{
+	struct clk *clk = hb_clk_init(node, &a9bclk_ops);
+	clk_prepare_enable(clk);
+}
+
+static void __init hb_emmc_init(struct device_node *node)
+{
+	hb_clk_init(node, &periclk_ops);
+}
+
+static const __initconst struct of_device_id clk_match[] = {
+	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+	{ .compatible = "calxeda,hb-pll-clock", .data = hb_pll_init, },
+	{ .compatible = "calxeda,hb-a9periph-clock", .data = hb_a9periph_init, },
+	{ .compatible = "calxeda,hb-a9bus-clock", .data = hb_a9bus_init, },
+	{ .compatible = "calxeda,hb-emmc-clock", .data = hb_emmc_init, },
+	{}
+};
+
+void __init highbank_clocks_init(void)
+{
+	of_clk_init(clk_match);
+}
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index fd36a8e..508c032 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -106,7 +106,7 @@
 
 	init.name = name;
 	init.ops = &clk_mux_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = parent_names;
 	init.num_parents = num_parents;
 
diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c
new file mode 100644
index 0000000..a15f792
--- /dev/null
+++ b/drivers/clk/clk-u300.c
@@ -0,0 +1,746 @@
+/*
+ * U300 clock implementation
+ * Copyright (C) 2007-2012 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+#include <mach/syscon.h>
+
+/*
+ * The clocking hierarchy currently looks like this.
+ * NOTE: the idea is NOT to show how the clocks are routed on the chip!
+ * The ideas is to show dependencies, so a clock higher up in the
+ * hierarchy has to be on in order for another clock to be on. Now,
+ * both CPU and DMA can actually be on top of the hierarchy, and that
+ * is not modeled currently. Instead we have the backbone AMBA bus on
+ * top. This bus cannot be programmed in any way but conceptually it
+ * needs to be active for the bridges and devices to transport data.
+ *
+ * Please be aware that a few clocks are hw controlled, which mean that
+ * the hw itself can turn on/off or change the rate of the clock when
+ * needed!
+ *
+ *  AMBA bus
+ *  |
+ *  +- CPU
+ *  +- FSMC NANDIF NAND Flash interface
+ *  +- SEMI Shared Memory interface
+ *  +- ISP Image Signal Processor (U335 only)
+ *  +- CDS (U335 only)
+ *  +- DMA Direct Memory Access Controller
+ *  +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
+ *  +- APEX
+ *  +- VIDEO_ENC AVE2/3 Video Encoder
+ *  +- XGAM Graphics Accelerator Controller
+ *  +- AHB
+ *  |
+ *  +- ahb:0 AHB Bridge
+ *  |  |
+ *  |  +- ahb:1 INTCON Interrupt controller
+ *  |  +- ahb:3 MSPRO  Memory Stick Pro controller
+ *  |  +- ahb:4 EMIF   External Memory interface
+ *  |
+ *  +- fast:0 FAST bridge
+ *  |  |
+ *  |  +- fast:1 MMCSD MMC/SD card reader controller
+ *  |  +- fast:2 I2S0  PCM I2S channel 0 controller
+ *  |  +- fast:3 I2S1  PCM I2S channel 1 controller
+ *  |  +- fast:4 I2C0  I2C channel 0 controller
+ *  |  +- fast:5 I2C1  I2C channel 1 controller
+ *  |  +- fast:6 SPI   SPI controller
+ *  |  +- fast:7 UART1 Secondary UART (U335 only)
+ *  |
+ *  +- slow:0 SLOW bridge
+ *     |
+ *     +- slow:1 SYSCON (not possible to control)
+ *     +- slow:2 WDOG Watchdog
+ *     +- slow:3 UART0 primary UART
+ *     +- slow:4 TIMER_APP Application timer - used in Linux
+ *     +- slow:5 KEYPAD controller
+ *     +- slow:6 GPIO controller
+ *     +- slow:7 RTC controller
+ *     +- slow:8 BT Bus Tracer (not used currently)
+ *     +- slow:9 EH Event Handler (not used currently)
+ *     +- slow:a TIMER_ACC Access style timer (not used currently)
+ *     +- slow:b PPM (U335 only, what is that?)
+ */
+
+/* Global syscon virtual base */
+static void __iomem *syscon_vbase;
+
+/**
+ * struct clk_syscon - U300 syscon clock
+ * @hw: corresponding clock hardware entry
+ * @hw_ctrld: whether this clock is hardware controlled (for refcount etc)
+ *	and does not need any magic pokes to be enabled/disabled
+ * @reset: state holder, whether this block's reset line is asserted or not
+ * @res_reg: reset line enable/disable flag register
+ * @res_bit: bit for resetting or taking this consumer out of reset
+ * @en_reg: clock line enable/disable flag register
+ * @en_bit: bit for enabling/disabling this consumer clock line
+ * @clk_val: magic value to poke in the register to enable/disable
+ *	this one clock
+ */
+struct clk_syscon {
+	struct clk_hw hw;
+	bool hw_ctrld;
+	bool reset;
+	void __iomem *res_reg;
+	u8 res_bit;
+	void __iomem *en_reg;
+	u8 en_bit;
+	u16 clk_val;
+};
+
+#define to_syscon(_hw) container_of(_hw, struct clk_syscon, hw)
+
+static DEFINE_SPINLOCK(syscon_resetreg_lock);
+
+/*
+ * Reset control functions. We remember if a block has been
+ * taken out of reset and don't remove the reset assertion again
+ * and vice versa. Currently we only remove resets so the
+ * enablement function is defined out.
+ */
+static void syscon_block_reset_enable(struct clk_syscon *sclk)
+{
+	unsigned long iflags;
+	u16 val;
+
+	/* Not all blocks support resetting */
+	if (!sclk->res_reg)
+		return;
+	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+	val = readw(sclk->res_reg);
+	val |= BIT(sclk->res_bit);
+	writew(val, sclk->res_reg);
+	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+	sclk->reset = true;
+}
+
+static void syscon_block_reset_disable(struct clk_syscon *sclk)
+{
+	unsigned long iflags;
+	u16 val;
+
+	/* Not all blocks support resetting */
+	if (!sclk->res_reg)
+		return;
+	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+	val = readw(sclk->res_reg);
+	val &= ~BIT(sclk->res_bit);
+	writew(val, sclk->res_reg);
+	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+	sclk->reset = false;
+}
+
+static int syscon_clk_prepare(struct clk_hw *hw)
+{
+	struct clk_syscon *sclk = to_syscon(hw);
+
+	/* If the block is in reset, bring it out */
+	if (sclk->reset)
+		syscon_block_reset_disable(sclk);
+	return 0;
+}
+
+static void syscon_clk_unprepare(struct clk_hw *hw)
+{
+	struct clk_syscon *sclk = to_syscon(hw);
+
+	/* Please don't force the console into reset */
+	if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN)
+		return;
+	/* When unpreparing, force block into reset */
+	if (!sclk->reset)
+		syscon_block_reset_enable(sclk);
+}
+
+static int syscon_clk_enable(struct clk_hw *hw)
+{
+	struct clk_syscon *sclk = to_syscon(hw);
+
+	/* Don't touch the hardware controlled clocks */
+	if (sclk->hw_ctrld)
+		return 0;
+	/* These cannot be controlled */
+	if (sclk->clk_val == 0xFFFFU)
+		return 0;
+
+	writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCER);
+	return 0;
+}
+
+static void syscon_clk_disable(struct clk_hw *hw)
+{
+	struct clk_syscon *sclk = to_syscon(hw);
+
+	/* Don't touch the hardware controlled clocks */
+	if (sclk->hw_ctrld)
+		return;
+	if (sclk->clk_val == 0xFFFFU)
+		return;
+	/* Please don't disable the console port */
+	if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN)
+		return;
+
+	writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCDR);
+}
+
+static int syscon_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_syscon *sclk = to_syscon(hw);
+	u16 val;
+
+	/* If no enable register defined, it's always-on */
+	if (!sclk->en_reg)
+		return 1;
+
+	val = readw(sclk->en_reg);
+	val &= BIT(sclk->en_bit);
+
+	return val ? 1 : 0;
+}
+
+static u16 syscon_get_perf(void)
+{
+	u16 val;
+
+	val = readw(syscon_vbase + U300_SYSCON_CCR);
+	val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	return val;
+}
+
+static unsigned long
+syscon_clk_recalc_rate(struct clk_hw *hw,
+		       unsigned long parent_rate)
+{
+	struct clk_syscon *sclk = to_syscon(hw);
+	u16 perf = syscon_get_perf();
+
+	switch(sclk->clk_val) {
+	case U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN:
+	case U300_SYSCON_SBCER_I2C0_CLK_EN:
+	case U300_SYSCON_SBCER_I2C1_CLK_EN:
+	case U300_SYSCON_SBCER_MMC_CLK_EN:
+	case U300_SYSCON_SBCER_SPI_CLK_EN:
+		/* The FAST clocks have one progression */
+		switch(perf) {
+		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+			return 13000000;
+		default:
+			return parent_rate; /* 26 MHz */
+		}
+	case U300_SYSCON_SBCER_DMAC_CLK_EN:
+	case U300_SYSCON_SBCER_NANDIF_CLK_EN:
+	case U300_SYSCON_SBCER_XGAM_CLK_EN:
+		/* AMBA interconnect peripherals */
+		switch(perf) {
+		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+			return 6500000;
+		case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+			return 26000000;
+		default:
+			return parent_rate; /* 52 MHz */
+		}
+	case U300_SYSCON_SBCER_SEMI_CLK_EN:
+	case U300_SYSCON_SBCER_EMIF_CLK_EN:
+		/* EMIF speeds */
+		switch(perf) {
+		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+			return 13000000;
+		case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+			return 52000000;
+		default:
+			return 104000000;
+		}
+	case U300_SYSCON_SBCER_CPU_CLK_EN:
+		/* And the fast CPU clock */
+		switch(perf) {
+		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+			return 13000000;
+		case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+			return 52000000;
+		case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+			return 104000000;
+		default:
+			return parent_rate; /* 208 MHz */
+		}
+	default:
+		/*
+		 * The SLOW clocks and default just inherit the rate of
+		 * their parent (typically PLL13 13 MHz).
+		 */
+		return parent_rate;
+	}
+}
+
+static long
+syscon_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+		      unsigned long *prate)
+{
+	struct clk_syscon *sclk = to_syscon(hw);
+
+	if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN)
+		return *prate;
+	/* We really only support setting the rate of the CPU clock */
+	if (rate <= 13000000)
+		return 13000000;
+	if (rate <= 52000000)
+		return 52000000;
+	if (rate <= 104000000)
+		return 104000000;
+	return 208000000;
+}
+
+static int syscon_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	struct clk_syscon *sclk = to_syscon(hw);
+	u16 val;
+
+	/* We only support setting the rate of the CPU clock */
+	if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN)
+		return -EINVAL;
+	switch (rate) {
+	case 13000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
+		break;
+	case 52000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
+		break;
+	case 104000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
+		break;
+	case 208000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
+		break;
+	default:
+		return -EINVAL;
+	}
+	val |= readw(syscon_vbase + U300_SYSCON_CCR) &
+		~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
+	writew(val, syscon_vbase + U300_SYSCON_CCR);
+	return 0;
+}
+
+static const struct clk_ops syscon_clk_ops = {
+	.prepare = syscon_clk_prepare,
+	.unprepare = syscon_clk_unprepare,
+	.enable = syscon_clk_enable,
+	.disable = syscon_clk_disable,
+	.is_enabled = syscon_clk_is_enabled,
+	.recalc_rate = syscon_clk_recalc_rate,
+	.round_rate = syscon_clk_round_rate,
+	.set_rate = syscon_clk_set_rate,
+};
+
+static struct clk * __init
+syscon_clk_register(struct device *dev, const char *name,
+		    const char *parent_name, unsigned long flags,
+		    bool hw_ctrld,
+		    void __iomem *res_reg, u8 res_bit,
+		    void __iomem *en_reg, u8 en_bit,
+		    u16 clk_val)
+{
+	struct clk *clk;
+	struct clk_syscon *sclk;
+	struct clk_init_data init;
+
+	sclk = kzalloc(sizeof(struct clk_syscon), GFP_KERNEL);
+	if (!sclk) {
+		pr_err("could not allocate syscon clock %s\n",
+			name);
+		return ERR_PTR(-ENOMEM);
+	}
+	init.name = name;
+	init.ops = &syscon_clk_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+	sclk->hw.init = &init;
+	sclk->hw_ctrld = hw_ctrld;
+	/* Assume the block is in reset at registration */
+	sclk->reset = true;
+	sclk->res_reg = res_reg;
+	sclk->res_bit = res_bit;
+	sclk->en_reg = en_reg;
+	sclk->en_bit = en_bit;
+	sclk->clk_val = clk_val;
+
+	clk = clk_register(dev, &sclk->hw);
+	if (IS_ERR(clk))
+		kfree(sclk);
+
+	return clk;
+}
+
+/**
+ * struct clk_mclk - U300 MCLK clock (MMC/SD clock)
+ * @hw: corresponding clock hardware entry
+ * @is_mspro: if this is the memory stick clock rather than MMC/SD
+ */
+struct clk_mclk {
+	struct clk_hw hw;
+	bool is_mspro;
+};
+
+#define to_mclk(_hw) container_of(_hw, struct clk_mclk, hw)
+
+static int mclk_clk_prepare(struct clk_hw *hw)
+{
+	struct clk_mclk *mclk = to_mclk(hw);
+	u16 val;
+
+	/* The MMC and MSPRO clocks need some special set-up */
+	if (!mclk->is_mspro) {
+		/* Set default MMC clock divisor to 18.9 MHz */
+		writew(0x0054U, syscon_vbase + U300_SYSCON_MMF0R);
+		val = readw(syscon_vbase + U300_SYSCON_MMCR);
+		/* Disable the MMC feedback clock */
+		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+		/* Disable MSPRO frequency */
+		val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+		writew(val, syscon_vbase + U300_SYSCON_MMCR);
+	} else {
+		val = readw(syscon_vbase + U300_SYSCON_MMCR);
+		/* Disable the MMC feedback clock */
+		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+		/* Enable MSPRO frequency */
+		val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+		writew(val, syscon_vbase + U300_SYSCON_MMCR);
+	}
+
+	return 0;
+}
+
+static unsigned long
+mclk_clk_recalc_rate(struct clk_hw *hw,
+		     unsigned long parent_rate)
+{
+	u16 perf = syscon_get_perf();
+
+	switch (perf) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+		/*
+		 * Here, the 208 MHz PLL gets shut down and the always
+		 * on 13 MHz PLL used for RTC etc kicks into use
+		 * instead.
+		 */
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+	{
+		/*
+		 * This clock is under program control. The register is
+		 * divided in two nybbles, bit 7-4 gives cycles-1 to count
+		 * high, bit 3-0 gives cycles-1 to count low. Distribute
+		 * these with no more than 1 cycle difference between
+		 * low and high and add low and high to get the actual
+		 * divisor. The base PLL is 208 MHz. Writing 0x00 will
+		 * divide by 1 and 1 so the highest frequency possible
+		 * is 104 MHz.
+		 *
+		 * e.g. 0x54 =>
+		 * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
+		 */
+		u16 val = readw(syscon_vbase + U300_SYSCON_MMF0R) &
+			U300_SYSCON_MMF0R_MASK;
+		switch (val) {
+		case 0x0054:
+			return 18900000;
+		case 0x0044:
+			return 20800000;
+		case 0x0043:
+			return 23100000;
+		case 0x0033:
+			return 26000000;
+		case 0x0032:
+			return 29700000;
+		case 0x0022:
+			return 34700000;
+		case 0x0021:
+			return 41600000;
+		case 0x0011:
+			return 52000000;
+		case 0x0000:
+			return 104000000;
+		default:
+			break;
+		}
+	}
+	default:
+		break;
+	}
+	return parent_rate;
+}
+
+static long
+mclk_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+		    unsigned long *prate)
+{
+	if (rate <= 18900000)
+		return 18900000;
+	if (rate <= 20800000)
+		return 20800000;
+	if (rate <= 23100000)
+		return 23100000;
+	if (rate <= 26000000)
+		return 26000000;
+	if (rate <= 29700000)
+		return 29700000;
+	if (rate <= 34700000)
+		return 34700000;
+	if (rate <= 41600000)
+		return 41600000;
+	/* Highest rate */
+	return 52000000;
+}
+
+static int mclk_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	u16 val;
+	u16 reg;
+
+	switch (rate) {
+	case 18900000:
+		val = 0x0054;
+		break;
+	case 20800000:
+		val = 0x0044;
+		break;
+	case 23100000:
+		val = 0x0043;
+		break;
+	case 26000000:
+		val = 0x0033;
+		break;
+	case 29700000:
+		val = 0x0032;
+		break;
+	case 34700000:
+		val = 0x0022;
+		break;
+	case 41600000:
+		val = 0x0021;
+		break;
+	case 52000000:
+		val = 0x0011;
+		break;
+	case 104000000:
+		val = 0x0000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	reg = readw(syscon_vbase + U300_SYSCON_MMF0R) &
+		~U300_SYSCON_MMF0R_MASK;
+	writew(reg | val, syscon_vbase + U300_SYSCON_MMF0R);
+	return 0;
+}
+
+static const struct clk_ops mclk_ops = {
+	.prepare = mclk_clk_prepare,
+	.recalc_rate = mclk_clk_recalc_rate,
+	.round_rate = mclk_clk_round_rate,
+	.set_rate = mclk_clk_set_rate,
+};
+
+static struct clk * __init
+mclk_clk_register(struct device *dev, const char *name,
+		  const char *parent_name, bool is_mspro)
+{
+	struct clk *clk;
+	struct clk_mclk *mclk;
+	struct clk_init_data init;
+
+	mclk = kzalloc(sizeof(struct clk_mclk), GFP_KERNEL);
+	if (!mclk) {
+		pr_err("could not allocate MMC/SD clock %s\n",
+		       name);
+		return ERR_PTR(-ENOMEM);
+	}
+	init.name = "mclk";
+	init.ops = &mclk_ops;
+	init.flags = 0;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+	mclk->hw.init = &init;
+	mclk->is_mspro = is_mspro;
+
+	clk = clk_register(dev, &mclk->hw);
+	if (IS_ERR(clk))
+		kfree(mclk);
+
+	return clk;
+}
+
+void __init u300_clk_init(void __iomem *base)
+{
+	u16 val;
+	struct clk *clk;
+
+	syscon_vbase = base;
+
+	/* Set system to run at PLL208, max performance, a known state. */
+	val = readw(syscon_vbase + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	writew(val, syscon_vbase + U300_SYSCON_CCR);
+	/* Wait for the PLL208 to lock if not locked in yet */
+	while (!(readw(syscon_vbase + U300_SYSCON_CSR) &
+		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+	/* Power management enable */
+	val = readw(syscon_vbase + U300_SYSCON_PMCR);
+	val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
+	writew(val, syscon_vbase + U300_SYSCON_PMCR);
+
+	/* These are always available (RTC and PLL13) */
+	clk = clk_register_fixed_rate(NULL, "app_32_clk", NULL,
+				      CLK_IS_ROOT, 32768);
+	/* The watchdog sits directly on the 32 kHz clock */
+	clk_register_clkdev(clk, NULL, "coh901327_wdog");
+	clk = clk_register_fixed_rate(NULL, "pll13", NULL,
+				      CLK_IS_ROOT, 13000000);
+
+	/* These derive from PLL208 */
+	clk = clk_register_fixed_rate(NULL, "pll208", NULL,
+				      CLK_IS_ROOT, 208000000);
+	clk = clk_register_fixed_factor(NULL, "app_208_clk", "pll208",
+					0, 1, 1);
+	clk = clk_register_fixed_factor(NULL, "app_104_clk", "pll208",
+					0, 1, 2);
+	clk = clk_register_fixed_factor(NULL, "app_52_clk", "pll208",
+					0, 1, 4);
+	/* The 52 MHz is divided down to 26 MHz */
+	clk = clk_register_fixed_factor(NULL, "app_26_clk", "app_52_clk",
+					0, 1, 2);
+
+	/* Directly on the AMBA interconnect */
+	clk = syscon_clk_register(NULL, "cpu_clk", "app_208_clk", 0, true,
+				  syscon_vbase + U300_SYSCON_RRR, 3,
+				  syscon_vbase + U300_SYSCON_CERR, 3,
+				  U300_SYSCON_SBCER_CPU_CLK_EN);
+	clk = syscon_clk_register(NULL, "dmac_clk", "app_52_clk", 0, true,
+				  syscon_vbase + U300_SYSCON_RRR, 4,
+				  syscon_vbase + U300_SYSCON_CERR, 4,
+				  U300_SYSCON_SBCER_DMAC_CLK_EN);
+	clk_register_clkdev(clk, NULL, "dma");
+	clk = syscon_clk_register(NULL, "fsmc_clk", "app_52_clk", 0, false,
+				  syscon_vbase + U300_SYSCON_RRR, 6,
+				  syscon_vbase + U300_SYSCON_CERR, 6,
+				  U300_SYSCON_SBCER_NANDIF_CLK_EN);
+	clk_register_clkdev(clk, NULL, "fsmc-nand");
+	clk = syscon_clk_register(NULL, "xgam_clk", "app_52_clk", 0, true,
+				  syscon_vbase + U300_SYSCON_RRR, 8,
+				  syscon_vbase + U300_SYSCON_CERR, 8,
+				  U300_SYSCON_SBCER_XGAM_CLK_EN);
+	clk_register_clkdev(clk, NULL, "xgam");
+	clk = syscon_clk_register(NULL, "semi_clk", "app_104_clk", 0, false,
+				  syscon_vbase + U300_SYSCON_RRR, 9,
+				  syscon_vbase + U300_SYSCON_CERR, 9,
+				  U300_SYSCON_SBCER_SEMI_CLK_EN);
+	clk_register_clkdev(clk, NULL, "semi");
+
+	/* AHB bridge clocks */
+	clk = syscon_clk_register(NULL, "ahb_subsys_clk", "app_52_clk", 0, true,
+				  syscon_vbase + U300_SYSCON_RRR, 10,
+				  syscon_vbase + U300_SYSCON_CERR, 10,
+				  U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN);
+	clk = syscon_clk_register(NULL, "intcon_clk", "ahb_subsys_clk", 0, false,
+				  syscon_vbase + U300_SYSCON_RRR, 12,
+				  syscon_vbase + U300_SYSCON_CERR, 12,
+				  /* Cannot be enabled, just taken out of reset */
+				  0xFFFFU);
+	clk_register_clkdev(clk, NULL, "intcon");
+	clk = syscon_clk_register(NULL, "emif_clk", "ahb_subsys_clk", 0, false,
+				  syscon_vbase + U300_SYSCON_RRR, 5,
+				  syscon_vbase + U300_SYSCON_CERR, 5,
+				  U300_SYSCON_SBCER_EMIF_CLK_EN);
+	clk_register_clkdev(clk, NULL, "pl172");
+
+	/* FAST bridge clocks */
+	clk = syscon_clk_register(NULL, "fast_clk", "app_26_clk", 0, true,
+				  syscon_vbase + U300_SYSCON_RFR, 0,
+				  syscon_vbase + U300_SYSCON_CEFR, 0,
+				  U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN);
+	clk = syscon_clk_register(NULL, "i2c0_p_clk", "fast_clk", 0, false,
+				  syscon_vbase + U300_SYSCON_RFR, 1,
+				  syscon_vbase + U300_SYSCON_CEFR, 1,
+				  U300_SYSCON_SBCER_I2C0_CLK_EN);
+	clk_register_clkdev(clk, NULL, "stu300.0");
+	clk = syscon_clk_register(NULL, "i2c1_p_clk", "fast_clk", 0, false,
+				  syscon_vbase + U300_SYSCON_RFR, 2,
+				  syscon_vbase + U300_SYSCON_CEFR, 2,
+				  U300_SYSCON_SBCER_I2C1_CLK_EN);
+	clk_register_clkdev(clk, NULL, "stu300.1");
+	clk = syscon_clk_register(NULL, "mmc_p_clk", "fast_clk", 0, false,
+				  syscon_vbase + U300_SYSCON_RFR, 5,
+				  syscon_vbase + U300_SYSCON_CEFR, 5,
+				  U300_SYSCON_SBCER_MMC_CLK_EN);
+	clk_register_clkdev(clk, "apb_pclk", "mmci");
+	clk = syscon_clk_register(NULL, "spi_p_clk", "fast_clk", 0, false,
+				  syscon_vbase + U300_SYSCON_RFR, 6,
+				  syscon_vbase + U300_SYSCON_CEFR, 6,
+				  U300_SYSCON_SBCER_SPI_CLK_EN);
+	/* The SPI has no external clock for the outward bus, uses the pclk */
+	clk_register_clkdev(clk, NULL, "pl022");
+	clk_register_clkdev(clk, "apb_pclk", "pl022");
+
+	/* SLOW bridge clocks */
+	clk = syscon_clk_register(NULL, "slow_clk", "pll13", 0, true,
+				  syscon_vbase + U300_SYSCON_RSR, 0,
+				  syscon_vbase + U300_SYSCON_CESR, 0,
+				  U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN);
+	clk = syscon_clk_register(NULL, "uart0_clk", "slow_clk", 0, false,
+				  syscon_vbase + U300_SYSCON_RSR, 1,
+				  syscon_vbase + U300_SYSCON_CESR, 1,
+				  U300_SYSCON_SBCER_UART_CLK_EN);
+	/* Same clock is used for APB and outward bus */
+	clk_register_clkdev(clk, NULL, "uart0");
+	clk_register_clkdev(clk, "apb_pclk", "uart0");
+	clk = syscon_clk_register(NULL, "gpio_clk", "slow_clk", 0, false,
+				  syscon_vbase + U300_SYSCON_RSR, 4,
+				  syscon_vbase + U300_SYSCON_CESR, 4,
+				  U300_SYSCON_SBCER_GPIO_CLK_EN);
+	clk_register_clkdev(clk, NULL, "u300-gpio");
+	clk = syscon_clk_register(NULL, "keypad_clk", "slow_clk", 0, false,
+				  syscon_vbase + U300_SYSCON_RSR, 5,
+				  syscon_vbase + U300_SYSCON_CESR, 6,
+				  U300_SYSCON_SBCER_KEYPAD_CLK_EN);
+	clk_register_clkdev(clk, NULL, "coh901461-keypad");
+	clk = syscon_clk_register(NULL, "rtc_clk", "slow_clk", 0, true,
+				  syscon_vbase + U300_SYSCON_RSR, 6,
+				  /* No clock enable register bit */
+				  NULL, 0, 0xFFFFU);
+	clk_register_clkdev(clk, NULL, "rtc-coh901331");
+	clk = syscon_clk_register(NULL, "app_tmr_clk", "slow_clk", 0, false,
+				  syscon_vbase + U300_SYSCON_RSR, 7,
+				  syscon_vbase + U300_SYSCON_CESR, 7,
+				  U300_SYSCON_SBCER_APP_TMR_CLK_EN);
+	clk_register_clkdev(clk, NULL, "apptimer");
+	clk = syscon_clk_register(NULL, "acc_tmr_clk", "slow_clk", 0, false,
+				  syscon_vbase + U300_SYSCON_RSR, 8,
+				  syscon_vbase + U300_SYSCON_CESR, 8,
+				  U300_SYSCON_SBCER_ACC_TMR_CLK_EN);
+	clk_register_clkdev(clk, NULL, "timer");
+
+	/* Then this special MMC/SD clock */
+	clk = mclk_clk_register(NULL, "mmc_clk", "mmc_p_clk", false);
+	clk_register_clkdev(clk, NULL, "mmci");
+}
diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c
new file mode 100644
index 0000000..e7b7765
--- /dev/null
+++ b/drivers/clk/clk-wm831x.c
@@ -0,0 +1,428 @@
+/*
+ * WM831x clock control
+ *
+ * Copyright 2011-2 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/wm831x/core.h>
+
+struct wm831x_clk {
+	struct wm831x *wm831x;
+	struct clk_hw xtal_hw;
+	struct clk_hw fll_hw;
+	struct clk_hw clkout_hw;
+	struct clk *xtal;
+	struct clk *fll;
+	struct clk *clkout;
+	bool xtal_ena;
+};
+
+static int wm831x_xtal_is_enabled(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  xtal_hw);
+
+	return clkdata->xtal_ena;
+}
+
+static unsigned long wm831x_xtal_recalc_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  xtal_hw);
+
+	if (clkdata->xtal_ena)
+		return 32768;
+	else
+		return 0;
+}
+
+static const struct clk_ops wm831x_xtal_ops = {
+	.is_enabled = wm831x_xtal_is_enabled,
+	.recalc_rate = wm831x_xtal_recalc_rate,
+};
+
+static struct clk_init_data wm831x_xtal_init = {
+	.name = "xtal",
+	.ops = &wm831x_xtal_ops,
+	.flags = CLK_IS_ROOT,
+};
+
+static const unsigned long wm831x_fll_auto_rates[] = {
+	 2048000,
+	11289600,
+	12000000,
+	12288000,
+	19200000,
+	22579600,
+	24000000,
+	24576000,
+};
+
+static int wm831x_fll_is_enabled(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  fll_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_FLL_CONTROL_1);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read FLL_CONTROL_1: %d\n",
+			ret);
+		return true;
+	}
+
+	return (ret & WM831X_FLL_ENA) != 0;
+}
+
+static int wm831x_fll_prepare(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  fll_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_2,
+			      WM831X_FLL_ENA, WM831X_FLL_ENA);
+	if (ret != 0)
+		dev_crit(wm831x->dev, "Failed to enable FLL: %d\n", ret);
+
+	usleep_range(2000, 2000);
+
+	return ret;
+}
+
+static void wm831x_fll_unprepare(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  fll_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_2, WM831X_FLL_ENA, 0);
+	if (ret != 0)
+		dev_crit(wm831x->dev, "Failed to disaable FLL: %d\n", ret);
+}
+
+static unsigned long wm831x_fll_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  fll_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n",
+			ret);
+		return 0;
+	}
+
+	if (ret & WM831X_FLL_AUTO)
+		return wm831x_fll_auto_rates[ret & WM831X_FLL_AUTO_FREQ_MASK];
+
+	dev_err(wm831x->dev, "FLL only supported in AUTO mode\n");
+
+	return 0;
+}
+
+static long wm831x_fll_round_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long *unused)
+{
+	int best = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_fll_auto_rates); i++)
+		if (abs(wm831x_fll_auto_rates[i] - rate) <
+		    abs(wm831x_fll_auto_rates[best] - rate))
+			best = i;
+
+	return wm831x_fll_auto_rates[best];
+}
+
+static int wm831x_fll_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  fll_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_fll_auto_rates); i++)
+		if (wm831x_fll_auto_rates[i] == rate)
+			break;
+	if (i == ARRAY_SIZE(wm831x_fll_auto_rates))
+		return -EINVAL;
+
+	if (wm831x_fll_is_enabled(hw))
+		return -EPERM;
+
+	return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_2,
+			       WM831X_FLL_AUTO_FREQ_MASK, i);
+}
+
+static const char *wm831x_fll_parents[] = {
+	"xtal",
+	"clkin",
+};
+
+static u8 wm831x_fll_get_parent(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  fll_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	/* AUTO mode is always clocked from the crystal */
+	ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n",
+			ret);
+		return 0;
+	}
+
+	if (ret & WM831X_FLL_AUTO)
+		return 0;
+
+	ret = wm831x_reg_read(wm831x, WM831X_FLL_CONTROL_5);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read FLL_CONTROL_5: %d\n",
+			ret);
+		return 0;
+	}
+
+	switch (ret & WM831X_FLL_CLK_SRC_MASK) {
+	case 0:
+		return 0;
+	case 1:
+		return 1;
+	default:
+		dev_err(wm831x->dev, "Unsupported FLL clock source %d\n",
+			ret & WM831X_FLL_CLK_SRC_MASK);
+		return 0;
+	}
+}
+
+static const struct clk_ops wm831x_fll_ops = {
+	.is_enabled = wm831x_fll_is_enabled,
+	.prepare = wm831x_fll_prepare,
+	.unprepare = wm831x_fll_unprepare,
+	.round_rate = wm831x_fll_round_rate,
+	.recalc_rate = wm831x_fll_recalc_rate,
+	.set_rate = wm831x_fll_set_rate,
+	.get_parent = wm831x_fll_get_parent,
+};
+
+static struct clk_init_data wm831x_fll_init = {
+	.name = "fll",
+	.ops = &wm831x_fll_ops,
+	.parent_names = wm831x_fll_parents,
+	.num_parents = ARRAY_SIZE(wm831x_fll_parents),
+	.flags = CLK_SET_RATE_GATE,
+};
+
+static int wm831x_clkout_is_enabled(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  clkout_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_1);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_1: %d\n",
+			ret);
+		return true;
+	}
+
+	return (ret & WM831X_CLKOUT_ENA) != 0;
+}
+
+static int wm831x_clkout_prepare(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  clkout_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret != 0) {
+		dev_crit(wm831x->dev, "Failed to lock registers: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1,
+			      WM831X_CLKOUT_ENA, WM831X_CLKOUT_ENA);
+	if (ret != 0)
+		dev_crit(wm831x->dev, "Failed to enable CLKOUT: %d\n", ret);
+
+	wm831x_reg_lock(wm831x);
+
+	return ret;
+}
+
+static void wm831x_clkout_unprepare(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  clkout_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret != 0) {
+		dev_crit(wm831x->dev, "Failed to lock registers: %d\n", ret);
+		return;
+	}
+
+	ret = wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1,
+			      WM831X_CLKOUT_ENA, 0);
+	if (ret != 0)
+		dev_crit(wm831x->dev, "Failed to disable CLKOUT: %d\n", ret);
+
+	wm831x_reg_lock(wm831x);
+}
+
+static const char *wm831x_clkout_parents[] = {
+	"xtal",
+	"fll",
+};
+
+static u8 wm831x_clkout_get_parent(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  clkout_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_1);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_1: %d\n",
+			ret);
+		return 0;
+	}
+
+	if (ret & WM831X_CLKOUT_SRC)
+		return 0;
+	else
+		return 1;
+}
+
+static int wm831x_clkout_set_parent(struct clk_hw *hw, u8 parent)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  clkout_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+
+	return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1,
+			       WM831X_CLKOUT_SRC,
+			       parent << WM831X_CLKOUT_SRC_SHIFT);
+}
+
+static const struct clk_ops wm831x_clkout_ops = {
+	.is_enabled = wm831x_clkout_is_enabled,
+	.prepare = wm831x_clkout_prepare,
+	.unprepare = wm831x_clkout_unprepare,
+	.get_parent = wm831x_clkout_get_parent,
+	.set_parent = wm831x_clkout_set_parent,
+};
+
+static struct clk_init_data wm831x_clkout_init = {
+	.name = "clkout",
+	.ops = &wm831x_clkout_ops,
+	.parent_names = wm831x_clkout_parents,
+	.num_parents = ARRAY_SIZE(wm831x_clkout_parents),
+	.flags = CLK_SET_RATE_PARENT,
+};
+
+static __devinit int wm831x_clk_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_clk *clkdata;
+	int ret;
+
+	clkdata = devm_kzalloc(&pdev->dev, sizeof(*clkdata), GFP_KERNEL);
+	if (!clkdata)
+		return -ENOMEM;
+
+	/* XTAL_ENA can only be set via OTP/InstantConfig so just read once */
+	ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n",
+			ret);
+		return ret;
+	}
+	clkdata->xtal_ena = ret & WM831X_XTAL_ENA;
+
+	clkdata->xtal_hw.init = &wm831x_xtal_init;
+	clkdata->xtal = clk_register(&pdev->dev, &clkdata->xtal_hw);
+	if (!clkdata->xtal)
+		return -EINVAL;
+
+	clkdata->fll_hw.init = &wm831x_fll_init;
+	clkdata->fll = clk_register(&pdev->dev, &clkdata->fll_hw);
+	if (!clkdata->fll) {
+		ret = -EINVAL;
+		goto err_xtal;
+	}
+
+	clkdata->clkout_hw.init = &wm831x_clkout_init;
+	clkdata->clkout = clk_register(&pdev->dev, &clkdata->clkout_hw);
+	if (!clkdata->clkout) {
+		ret = -EINVAL;
+		goto err_fll;
+	}
+
+	dev_set_drvdata(&pdev->dev, clkdata);
+
+	return 0;
+
+err_fll:
+	clk_unregister(clkdata->fll);
+err_xtal:
+	clk_unregister(clkdata->xtal);
+	return ret;
+}
+
+static int __devexit wm831x_clk_remove(struct platform_device *pdev)
+{
+	struct wm831x_clk *clkdata = dev_get_drvdata(&pdev->dev);
+
+	clk_unregister(clkdata->clkout);
+	clk_unregister(clkdata->fll);
+	clk_unregister(clkdata->xtal);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_clk_driver = {
+	.probe = wm831x_clk_probe,
+	.remove = __devexit_p(wm831x_clk_remove),
+	.driver		= {
+		.name	= "wm831x-clk",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(wm831x_clk_driver);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x clock driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-clk");
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 687b00d..c87fdd7 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/list.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 static DEFINE_SPINLOCK(enable_lock);
 static DEFINE_MUTEX(prepare_lock);
@@ -850,18 +851,21 @@
 {
 	struct clk *child;
 	unsigned long old_rate;
+	unsigned long best_parent_rate = 0;
 	struct hlist_node *tmp;
 
 	old_rate = clk->rate;
 
+	if (clk->parent)
+		best_parent_rate = clk->parent->rate;
+
 	if (clk->ops->set_rate)
-		clk->ops->set_rate(clk->hw, clk->new_rate, clk->parent->rate);
+		clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
 
 	if (clk->ops->recalc_rate)
-		clk->rate = clk->ops->recalc_rate(clk->hw,
-				clk->parent->rate);
+		clk->rate = clk->ops->recalc_rate(clk->hw, best_parent_rate);
 	else
-		clk->rate = clk->parent->rate;
+		clk->rate = best_parent_rate;
 
 	if (clk->notifier_count && old_rate != clk->rate)
 		__clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
@@ -999,7 +1003,7 @@
 
 	if (!clk->parents)
 		clk->parents =
-			kmalloc((sizeof(struct clk*) * clk->num_parents),
+			kzalloc((sizeof(struct clk*) * clk->num_parents),
 					GFP_KERNEL);
 
 	if (!clk->parents)
@@ -1064,21 +1068,24 @@
 
 	old_parent = clk->parent;
 
-	/* find index of new parent clock using cached parent ptrs */
-	for (i = 0; i < clk->num_parents; i++)
-		if (clk->parents[i] == parent)
-			break;
+	if (!clk->parents)
+		clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents),
+								GFP_KERNEL);
 
 	/*
-	 * find index of new parent clock using string name comparison
-	 * also try to cache the parent to avoid future calls to __clk_lookup
+	 * find index of new parent clock using cached parent ptrs,
+	 * or if not yet cached, use string name comparison and cache
+	 * them now to avoid future calls to __clk_lookup.
 	 */
-	if (i == clk->num_parents)
-		for (i = 0; i < clk->num_parents; i++)
-			if (!strcmp(clk->parent_names[i], parent->name)) {
+	for (i = 0; i < clk->num_parents; i++) {
+		if (clk->parents && clk->parents[i] == parent)
+			break;
+		else if (!strcmp(clk->parent_names[i], parent->name)) {
+			if (clk->parents)
 				clk->parents[i] = __clk_lookup(parent->name);
-				break;
-			}
+			break;
+		}
+	}
 
 	if (i == clk->num_parents) {
 		pr_debug("%s: clock %s is not a possible parent of clock %s\n",
@@ -1229,8 +1236,8 @@
 	 * If clk->parents is not NULL we skip this entire block.  This allows
 	 * for clock drivers to statically initialize clk->parents.
 	 */
-	if (clk->num_parents && !clk->parents) {
-		clk->parents = kmalloc((sizeof(struct clk*) * clk->num_parents),
+	if (clk->num_parents > 1 && !clk->parents) {
+		clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents),
 				GFP_KERNEL);
 		/*
 		 * __clk_lookup returns NULL for parents that have not been
@@ -1544,3 +1551,142 @@
 	return ret;
 }
 EXPORT_SYMBOL_GPL(clk_notifier_unregister);
+
+#ifdef CONFIG_OF
+/**
+ * struct of_clk_provider - Clock provider registration structure
+ * @link: Entry in global list of clock providers
+ * @node: Pointer to device tree node of clock provider
+ * @get: Get clock callback.  Returns NULL or a struct clk for the
+ *       given clock specifier
+ * @data: context pointer to be passed into @get callback
+ */
+struct of_clk_provider {
+	struct list_head link;
+
+	struct device_node *node;
+	struct clk *(*get)(struct of_phandle_args *clkspec, void *data);
+	void *data;
+};
+
+static LIST_HEAD(of_clk_providers);
+static DEFINE_MUTEX(of_clk_lock);
+
+struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
+				     void *data)
+{
+	return data;
+}
+EXPORT_SYMBOL_GPL(of_clk_src_simple_get);
+
+/**
+ * of_clk_add_provider() - Register a clock provider for a node
+ * @np: Device node pointer associated with clock provider
+ * @clk_src_get: callback for decoding clock
+ * @data: context pointer for @clk_src_get callback.
+ */
+int of_clk_add_provider(struct device_node *np,
+			struct clk *(*clk_src_get)(struct of_phandle_args *clkspec,
+						   void *data),
+			void *data)
+{
+	struct of_clk_provider *cp;
+
+	cp = kzalloc(sizeof(struct of_clk_provider), GFP_KERNEL);
+	if (!cp)
+		return -ENOMEM;
+
+	cp->node = of_node_get(np);
+	cp->data = data;
+	cp->get = clk_src_get;
+
+	mutex_lock(&of_clk_lock);
+	list_add(&cp->link, &of_clk_providers);
+	mutex_unlock(&of_clk_lock);
+	pr_debug("Added clock from %s\n", np->full_name);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_clk_add_provider);
+
+/**
+ * of_clk_del_provider() - Remove a previously registered clock provider
+ * @np: Device node pointer associated with clock provider
+ */
+void of_clk_del_provider(struct device_node *np)
+{
+	struct of_clk_provider *cp;
+
+	mutex_lock(&of_clk_lock);
+	list_for_each_entry(cp, &of_clk_providers, link) {
+		if (cp->node == np) {
+			list_del(&cp->link);
+			of_node_put(cp->node);
+			kfree(cp);
+			break;
+		}
+	}
+	mutex_unlock(&of_clk_lock);
+}
+EXPORT_SYMBOL_GPL(of_clk_del_provider);
+
+struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec)
+{
+	struct of_clk_provider *provider;
+	struct clk *clk = ERR_PTR(-ENOENT);
+
+	/* Check if we have such a provider in our array */
+	mutex_lock(&of_clk_lock);
+	list_for_each_entry(provider, &of_clk_providers, link) {
+		if (provider->node == clkspec->np)
+			clk = provider->get(clkspec, provider->data);
+		if (!IS_ERR(clk))
+			break;
+	}
+	mutex_unlock(&of_clk_lock);
+
+	return clk;
+}
+
+const char *of_clk_get_parent_name(struct device_node *np, int index)
+{
+	struct of_phandle_args clkspec;
+	const char *clk_name;
+	int rc;
+
+	if (index < 0)
+		return NULL;
+
+	rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", index,
+					&clkspec);
+	if (rc)
+		return NULL;
+
+	if (of_property_read_string_index(clkspec.np, "clock-output-names",
+					  clkspec.args_count ? clkspec.args[0] : 0,
+					  &clk_name) < 0)
+		clk_name = clkspec.np->name;
+
+	of_node_put(clkspec.np);
+	return clk_name;
+}
+EXPORT_SYMBOL_GPL(of_clk_get_parent_name);
+
+/**
+ * of_clk_init() - Scan and init clock providers from the DT
+ * @matches: array of compatible values and init functions for providers.
+ *
+ * This function scans the device tree for matching clock providers and
+ * calls their initialization functions
+ */
+void __init of_clk_init(const struct of_device_id *matches)
+{
+	struct device_node *np;
+
+	for_each_matching_node(np, matches) {
+		const struct of_device_id *match = of_match_node(matches, np);
+		of_clk_init_cb_t clk_init_cb = match->data;
+		clk_init_cb(np);
+	}
+}
+#endif
diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c
index c535cf8..20649b3 100644
--- a/drivers/clk/clkdev.c
+++ b/drivers/clk/clkdev.c
@@ -19,10 +19,80 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/of.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 
+#ifdef CONFIG_OF
+struct clk *of_clk_get(struct device_node *np, int index)
+{
+	struct of_phandle_args clkspec;
+	struct clk *clk;
+	int rc;
+
+	if (index < 0)
+		return ERR_PTR(-EINVAL);
+
+	rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", index,
+					&clkspec);
+	if (rc)
+		return ERR_PTR(rc);
+
+	clk = of_clk_get_from_provider(&clkspec);
+	of_node_put(clkspec.np);
+	return clk;
+}
+EXPORT_SYMBOL(of_clk_get);
+
+/**
+ * of_clk_get_by_name() - Parse and lookup a clock referenced by a device node
+ * @np: pointer to clock consumer node
+ * @name: name of consumer's clock input, or NULL for the first clock reference
+ *
+ * This function parses the clocks and clock-names properties,
+ * and uses them to look up the struct clk from the registered list of clock
+ * providers.
+ */
+struct clk *of_clk_get_by_name(struct device_node *np, const char *name)
+{
+	struct clk *clk = ERR_PTR(-ENOENT);
+
+	/* Walk up the tree of devices looking for a clock that matches */
+	while (np) {
+		int index = 0;
+
+		/*
+		 * For named clocks, first look up the name in the
+		 * "clock-names" property.  If it cannot be found, then
+		 * index will be an error code, and of_clk_get() will fail.
+		 */
+		if (name)
+			index = of_property_match_string(np, "clock-names", name);
+		clk = of_clk_get(np, index);
+		if (!IS_ERR(clk))
+			break;
+		else if (name && index >= 0) {
+			pr_err("ERROR: could not get clock %s:%s(%i)\n",
+				np->full_name, name ? name : "", index);
+			return clk;
+		}
+
+		/*
+		 * No matching clock found on this node.  If the parent node
+		 * has a "clock-ranges" property, then we can try one of its
+		 * clocks.
+		 */
+		np = np->parent;
+		if (np && !of_get_property(np, "clock-ranges", NULL))
+			break;
+	}
+
+	return clk;
+}
+EXPORT_SYMBOL(of_clk_get_by_name);
+#endif
+
 /*
  * Find the correct struct clk for the device and connection ID.
  * We do slightly fuzzy matching here:
@@ -83,6 +153,13 @@
 struct clk *clk_get(struct device *dev, const char *con_id)
 {
 	const char *dev_id = dev ? dev_name(dev) : NULL;
+	struct clk *clk;
+
+	if (dev) {
+		clk = of_clk_get_by_name(dev->of_node, con_id);
+		if (clk && __clk_get(clk))
+			return clk;
+	}
 
 	return clk_get_sys(dev_id, con_id);
 }
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
index c14b021..844043a 100644
--- a/drivers/clk/mxs/clk-imx23.c
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -71,7 +71,7 @@
 	__mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
 }
 
-static struct clk_lookup uart_lookups[] __initdata = {
+static struct clk_lookup uart_lookups[] = {
 	{ .dev_id = "duart", },
 	{ .dev_id = "mxs-auart.0", },
 	{ .dev_id = "mxs-auart.1", },
@@ -80,31 +80,31 @@
 	{ .dev_id = "80070000.serial", },
 };
 
-static struct clk_lookup hbus_lookups[] __initdata = {
+static struct clk_lookup hbus_lookups[] = {
 	{ .dev_id = "imx23-dma-apbh", },
 	{ .dev_id = "80004000.dma-apbh", },
 };
 
-static struct clk_lookup xbus_lookups[] __initdata = {
+static struct clk_lookup xbus_lookups[] = {
 	{ .dev_id = "duart", .con_id = "apb_pclk"},
 	{ .dev_id = "80070000.serial", .con_id = "apb_pclk"},
 	{ .dev_id = "imx23-dma-apbx", },
 	{ .dev_id = "80024000.dma-apbx", },
 };
 
-static struct clk_lookup ssp_lookups[] __initdata = {
+static struct clk_lookup ssp_lookups[] = {
 	{ .dev_id = "imx23-mmc.0", },
 	{ .dev_id = "imx23-mmc.1", },
 	{ .dev_id = "80010000.ssp", },
 	{ .dev_id = "80034000.ssp", },
 };
 
-static struct clk_lookup lcdif_lookups[] __initdata = {
+static struct clk_lookup lcdif_lookups[] = {
 	{ .dev_id = "imx23-fb", },
 	{ .dev_id = "80030000.lcdif", },
 };
 
-static struct clk_lookup gpmi_lookups[] __initdata = {
+static struct clk_lookup gpmi_lookups[] = {
 	{ .dev_id = "imx23-gpmi-nand", },
 	{ .dev_id = "8000c000.gpmi-nand", },
 };
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index eb430bb..e3aab67 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -120,7 +120,7 @@
 	writel_relaxed(val, FRAC0);
 }
 
-static struct clk_lookup uart_lookups[] __initdata = {
+static struct clk_lookup uart_lookups[] = {
 	{ .dev_id = "duart", },
 	{ .dev_id = "mxs-auart.0", },
 	{ .dev_id = "mxs-auart.1", },
@@ -135,71 +135,71 @@
 	{ .dev_id = "80074000.serial", },
 };
 
-static struct clk_lookup hbus_lookups[] __initdata = {
+static struct clk_lookup hbus_lookups[] = {
 	{ .dev_id = "imx28-dma-apbh", },
 	{ .dev_id = "80004000.dma-apbh", },
 };
 
-static struct clk_lookup xbus_lookups[] __initdata = {
+static struct clk_lookup xbus_lookups[] = {
 	{ .dev_id = "duart", .con_id = "apb_pclk"},
 	{ .dev_id = "80074000.serial", .con_id = "apb_pclk"},
 	{ .dev_id = "imx28-dma-apbx", },
 	{ .dev_id = "80024000.dma-apbx", },
 };
 
-static struct clk_lookup ssp0_lookups[] __initdata = {
+static struct clk_lookup ssp0_lookups[] = {
 	{ .dev_id = "imx28-mmc.0", },
 	{ .dev_id = "80010000.ssp", },
 };
 
-static struct clk_lookup ssp1_lookups[] __initdata = {
+static struct clk_lookup ssp1_lookups[] = {
 	{ .dev_id = "imx28-mmc.1", },
 	{ .dev_id = "80012000.ssp", },
 };
 
-static struct clk_lookup ssp2_lookups[] __initdata = {
+static struct clk_lookup ssp2_lookups[] = {
 	{ .dev_id = "imx28-mmc.2", },
 	{ .dev_id = "80014000.ssp", },
 };
 
-static struct clk_lookup ssp3_lookups[] __initdata = {
+static struct clk_lookup ssp3_lookups[] = {
 	{ .dev_id = "imx28-mmc.3", },
 	{ .dev_id = "80016000.ssp", },
 };
 
-static struct clk_lookup lcdif_lookups[] __initdata = {
+static struct clk_lookup lcdif_lookups[] = {
 	{ .dev_id = "imx28-fb", },
 	{ .dev_id = "80030000.lcdif", },
 };
 
-static struct clk_lookup gpmi_lookups[] __initdata = {
+static struct clk_lookup gpmi_lookups[] = {
 	{ .dev_id = "imx28-gpmi-nand", },
 	{ .dev_id = "8000c000.gpmi-nand", },
 };
 
-static struct clk_lookup fec_lookups[] __initdata = {
+static struct clk_lookup fec_lookups[] = {
 	{ .dev_id = "imx28-fec.0", },
 	{ .dev_id = "imx28-fec.1", },
 	{ .dev_id = "800f0000.ethernet", },
 	{ .dev_id = "800f4000.ethernet", },
 };
 
-static struct clk_lookup can0_lookups[] __initdata = {
+static struct clk_lookup can0_lookups[] = {
 	{ .dev_id = "flexcan.0", },
 	{ .dev_id = "80032000.can", },
 };
 
-static struct clk_lookup can1_lookups[] __initdata = {
+static struct clk_lookup can1_lookups[] = {
 	{ .dev_id = "flexcan.1", },
 	{ .dev_id = "80034000.can", },
 };
 
-static struct clk_lookup saif0_lookups[] __initdata = {
+static struct clk_lookup saif0_lookups[] = {
 	{ .dev_id = "mxs-saif.0", },
 	{ .dev_id = "80042000.saif", },
 };
 
-static struct clk_lookup saif1_lookups[] __initdata = {
+static struct clk_lookup saif1_lookups[] = {
 	{ .dev_id = "mxs-saif.1", },
 	{ .dev_id = "80046000.saif", },
 };
@@ -245,8 +245,8 @@
 	clks[pll2] = mxs_clk_pll("pll2", "ref_xtal", PLL2CTRL0, 23, 50000000);
 	clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll0", FRAC0, 0);
 	clks[ref_emi] = mxs_clk_ref("ref_emi", "pll0", FRAC0, 1);
-	clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 2);
-	clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 3);
+	clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 2);
+	clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 3);
 	clks[ref_pix] = mxs_clk_ref("ref_pix", "pll0", FRAC1, 0);
 	clks[ref_hsadc] = mxs_clk_ref("ref_hsadc", "pll0", FRAC1, 1);
 	clks[ref_gpmi] = mxs_clk_ref("ref_gpmi", "pll0", FRAC1, 2);
diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c
index af34074..6756e7c 100644
--- a/drivers/clk/spear/clk-aux-synth.c
+++ b/drivers/clk/spear/clk-aux-synth.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk-frac-synth.c b/drivers/clk/spear/clk-frac-synth.c
index 4dbdb3f..958aa3a 100644
--- a/drivers/clk/spear/clk-frac-synth.c
+++ b/drivers/clk/spear/clk-frac-synth.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk-gpt-synth.c b/drivers/clk/spear/clk-gpt-synth.c
index b471c97..1afc18c 100644
--- a/drivers/clk/spear/clk-gpt-synth.c
+++ b/drivers/clk/spear/clk-gpt-synth.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c
index dcd4bdf..5f1b6ba 100644
--- a/drivers/clk/spear/clk-vco-pll.c
+++ b/drivers/clk/spear/clk-vco-pll.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c
index 376d4e5..7cd6378 100644
--- a/drivers/clk/spear/clk.c
+++ b/drivers/clk/spear/clk.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h
index 3321c46..9317376 100644
--- a/drivers/clk/spear/clk.h
+++ b/drivers/clk/spear/clk.h
@@ -2,7 +2,7 @@
  * Clock framework definitions for SPEAr platform
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c
index 42b68df..8f05652d 100644
--- a/drivers/clk/spear/spear1310_clock.c
+++ b/drivers/clk/spear/spear1310_clock.c
@@ -4,7 +4,7 @@
  * SPEAr1310 machine clock framework source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c
index f130919..e3ea721 100644
--- a/drivers/clk/spear/spear1340_clock.c
+++ b/drivers/clk/spear/spear1340_clock.c
@@ -4,7 +4,7 @@
  * SPEAr1340 machine clock framework source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c
index 440bb3e..01dd6da 100644
--- a/drivers/clk/spear/spear3xx_clock.c
+++ b/drivers/clk/spear/spear3xx_clock.c
@@ -2,7 +2,7 @@
  * SPEAr3xx machines clock framework source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c
index f9a20b3..61026ae 100644
--- a/drivers/clk/spear/spear6xx_clock.c
+++ b/drivers/clk/spear/spear6xx_clock.c
@@ -2,7 +2,7 @@
  * SPEAr6xx machines clock framework source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -298,7 +298,7 @@
 
 	clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
 			GMAC_CLK_ENB, 0, &_lock);
-	clk_register_clkdev(clk, NULL, "gmac");
+	clk_register_clkdev(clk, NULL, "e0800000.ethernet");
 
 	clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
 			I2C_CLK_ENB, 0, &_lock);
diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
new file mode 100644
index 0000000..50cf6a2
--- /dev/null
+++ b/drivers/clk/versatile/Makefile
@@ -0,0 +1,3 @@
+# Makefile for Versatile-specific clocks
+obj-$(CONFIG_ICST)		+= clk-icst.o
+obj-$(CONFIG_ARCH_INTEGRATOR)	+= clk-integrator.o
diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
new file mode 100644
index 0000000..f555b50
--- /dev/null
+++ b/drivers/clk/versatile/clk-icst.c
@@ -0,0 +1,100 @@
+/*
+ * Driver for the ICST307 VCO clock found in the ARM Reference designs.
+ * We wrap the custom interface from <asm/hardware/icst.h> into the generic
+ * clock framework.
+ *
+ * TODO: when all ARM reference designs are migrated to generic clocks, the
+ * ICST clock code from the ARM tree should probably be merged into this
+ * file.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+
+#include "clk-icst.h"
+
+/**
+ * struct clk_icst - ICST VCO clock wrapper
+ * @hw: corresponding clock hardware entry
+ * @params: parameters for this ICST instance
+ * @rate: current rate
+ * @setvco: function to commit ICST settings to hardware
+ */
+struct clk_icst {
+	struct clk_hw hw;
+	const struct icst_params *params;
+	unsigned long rate;
+	struct icst_vco (*getvco)(void);
+	void (*setvco)(struct icst_vco);
+};
+
+#define to_icst(_hw) container_of(_hw, struct clk_icst, hw)
+
+static unsigned long icst_recalc_rate(struct clk_hw *hw,
+				      unsigned long parent_rate)
+{
+	struct clk_icst *icst = to_icst(hw);
+	struct icst_vco vco;
+
+	vco = icst->getvco();
+	icst->rate = icst_hz(icst->params, vco);
+	return icst->rate;
+}
+
+static long icst_round_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long *prate)
+{
+	struct clk_icst *icst = to_icst(hw);
+	struct icst_vco vco;
+
+	vco = icst_hz_to_vco(icst->params, rate);
+	return icst_hz(icst->params, vco);
+}
+
+static int icst_set_rate(struct clk_hw *hw, unsigned long rate,
+			 unsigned long parent_rate)
+{
+	struct clk_icst *icst = to_icst(hw);
+	struct icst_vco vco;
+
+	vco = icst_hz_to_vco(icst->params, rate);
+	icst->rate = icst_hz(icst->params, vco);
+	icst->setvco(vco);
+	return 0;
+}
+
+static const struct clk_ops icst_ops = {
+	.recalc_rate = icst_recalc_rate,
+	.round_rate = icst_round_rate,
+	.set_rate = icst_set_rate,
+};
+
+struct clk * __init icst_clk_register(struct device *dev,
+				      const struct clk_icst_desc *desc)
+{
+	struct clk *clk;
+	struct clk_icst *icst;
+	struct clk_init_data init;
+
+	icst = kzalloc(sizeof(struct clk_icst), GFP_KERNEL);
+	if (!icst) {
+		pr_err("could not allocate ICST clock!\n");
+		return ERR_PTR(-ENOMEM);
+	}
+	init.name = "icst";
+	init.ops = &icst_ops;
+	init.flags = CLK_IS_ROOT;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	icst->hw.init = &init;
+	icst->params = desc->params;
+	icst->getvco = desc->getvco;
+	icst->setvco = desc->setvco;
+
+	clk = clk_register(dev, &icst->hw);
+	if (IS_ERR(clk))
+		kfree(icst);
+
+	return clk;
+}
diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h
new file mode 100644
index 0000000..71b4c56
--- /dev/null
+++ b/drivers/clk/versatile/clk-icst.h
@@ -0,0 +1,10 @@
+#include <asm/hardware/icst.h>
+
+struct clk_icst_desc {
+	const struct icst_params *params;
+	struct icst_vco (*getvco)(void);
+	void (*setvco)(struct icst_vco);
+};
+
+struct clk *icst_clk_register(struct device *dev,
+			      const struct clk_icst_desc *desc);
diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-integrator.c
new file mode 100644
index 0000000..a505392
--- /dev/null
+++ b/drivers/clk/versatile/clk-integrator.c
@@ -0,0 +1,111 @@
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#include "clk-icst.h"
+
+/*
+ * Implementation of the ARM Integrator/AP and Integrator/CP clock tree.
+ * Inspired by portions of:
+ * plat-versatile/clock.c and plat-versatile/include/plat/clock.h
+ */
+#define CM_LOCK		(__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
+#define CM_AUXOSC	(__io_address(INTEGRATOR_HDR_BASE)+0x1c)
+
+/**
+ * cp_auxvco_get() - get ICST VCO settings for the Integrator/CP
+ * @vco: ICST VCO parameters to update with hardware status
+ */
+static struct icst_vco cp_auxvco_get(void)
+{
+	u32 val;
+	struct icst_vco vco;
+
+	val = readl(CM_AUXOSC);
+	vco.v = val & 0x1ff;
+	vco.r = (val >> 9) & 0x7f;
+	vco.s = (val >> 16) & 03;
+	return vco;
+}
+
+/**
+ * cp_auxvco_set() - commit changes to Integrator/CP ICST VCO
+ * @vco: ICST VCO parameters to commit
+ */
+static void cp_auxvco_set(struct icst_vco vco)
+{
+	u32 val;
+
+	val = readl(CM_AUXOSC) & ~0x7ffff;
+	val |= vco.v | (vco.r << 9) | (vco.s << 16);
+
+	/* This magic unlocks the CM VCO so it can be controlled */
+	writel(0xa05f, CM_LOCK);
+	writel(val, CM_AUXOSC);
+	/* This locks the CM again */
+	writel(0, CM_LOCK);
+}
+
+static const struct icst_params cp_auxvco_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST525_VCO_MAX_5V,
+	.vco_min	= ICST525_VCO_MIN,
+	.vd_min 	= 8,
+	.vd_max 	= 263,
+	.rd_min 	= 3,
+	.rd_max 	= 65,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
+};
+
+static const struct clk_icst_desc __initdata cp_icst_desc = {
+	.params = &cp_auxvco_params,
+	.getvco = cp_auxvco_get,
+	.setvco = cp_auxvco_set,
+};
+
+/*
+ * integrator_clk_init() - set up the integrator clock tree
+ * @is_cp: pass true if it's the Integrator/CP else AP is assumed
+ */
+void __init integrator_clk_init(bool is_cp)
+{
+	struct clk *clk;
+
+	/* APB clock dummy */
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	/* UART reference clock */
+	clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
+				14745600);
+	clk_register_clkdev(clk, NULL, "uart0");
+	clk_register_clkdev(clk, NULL, "uart1");
+	if (is_cp)
+		clk_register_clkdev(clk, NULL, "mmci");
+
+	/* 24 MHz clock */
+	clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT,
+				24000000);
+	clk_register_clkdev(clk, NULL, "kmi0");
+	clk_register_clkdev(clk, NULL, "kmi1");
+	if (!is_cp)
+		clk_register_clkdev(clk, NULL, "ap_timer");
+
+	if (!is_cp)
+		return;
+
+	/* 1 MHz clock */
+	clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT,
+				1000000);
+	clk_register_clkdev(clk, NULL, "sp804");
+
+	/* ICST VCO clock used on the Integrator/CP CLCD */
+	clk = icst_clk_register(NULL, &cp_icst_desc);
+	clk_register_clkdev(clk, NULL, "clcd");
+}
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 32fe9ef5..98b06ba 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -48,13 +48,13 @@
 	unsigned long next_match_value;
 	unsigned long max_match_value;
 	unsigned long rate;
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	struct clock_event_device ced;
 	struct clocksource cs;
 	unsigned long total_cycles;
 };
 
-static DEFINE_SPINLOCK(sh_cmt_lock);
+static DEFINE_RAW_SPINLOCK(sh_cmt_lock);
 
 #define CMSTR -1 /* shared register */
 #define CMCSR 0 /* channel register */
@@ -139,7 +139,7 @@
 	unsigned long flags, value;
 
 	/* start stop register shared by multiple timer channels */
-	spin_lock_irqsave(&sh_cmt_lock, flags);
+	raw_spin_lock_irqsave(&sh_cmt_lock, flags);
 	value = sh_cmt_read(p, CMSTR);
 
 	if (start)
@@ -148,7 +148,7 @@
 		value &= ~(1 << cfg->timer_bit);
 
 	sh_cmt_write(p, CMSTR, value);
-	spin_unlock_irqrestore(&sh_cmt_lock, flags);
+	raw_spin_unlock_irqrestore(&sh_cmt_lock, flags);
 }
 
 static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate)
@@ -328,9 +328,9 @@
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&p->lock, flags);
+	raw_spin_lock_irqsave(&p->lock, flags);
 	__sh_cmt_set_next(p, delta);
-	spin_unlock_irqrestore(&p->lock, flags);
+	raw_spin_unlock_irqrestore(&p->lock, flags);
 }
 
 static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id)
@@ -385,7 +385,7 @@
 	int ret = 0;
 	unsigned long flags;
 
-	spin_lock_irqsave(&p->lock, flags);
+	raw_spin_lock_irqsave(&p->lock, flags);
 
 	if (!(p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE)))
 		ret = sh_cmt_enable(p, &p->rate);
@@ -398,7 +398,7 @@
 	if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT)))
 		__sh_cmt_set_next(p, p->max_match_value);
  out:
-	spin_unlock_irqrestore(&p->lock, flags);
+	raw_spin_unlock_irqrestore(&p->lock, flags);
 
 	return ret;
 }
@@ -408,7 +408,7 @@
 	unsigned long flags;
 	unsigned long f;
 
-	spin_lock_irqsave(&p->lock, flags);
+	raw_spin_lock_irqsave(&p->lock, flags);
 
 	f = p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE);
 	p->flags &= ~flag;
@@ -420,7 +420,7 @@
 	if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE))
 		__sh_cmt_set_next(p, p->max_match_value);
 
-	spin_unlock_irqrestore(&p->lock, flags);
+	raw_spin_unlock_irqrestore(&p->lock, flags);
 }
 
 static struct sh_cmt_priv *cs_to_sh_cmt(struct clocksource *cs)
@@ -435,13 +435,13 @@
 	unsigned long value;
 	int has_wrapped;
 
-	spin_lock_irqsave(&p->lock, flags);
+	raw_spin_lock_irqsave(&p->lock, flags);
 	value = p->total_cycles;
 	raw = sh_cmt_get_counter(p, &has_wrapped);
 
 	if (unlikely(has_wrapped))
 		raw += p->match_value + 1;
-	spin_unlock_irqrestore(&p->lock, flags);
+	raw_spin_unlock_irqrestore(&p->lock, flags);
 
 	return value + raw;
 }
@@ -591,7 +591,7 @@
 		p->max_match_value = (1 << p->width) - 1;
 
 	p->match_value = p->max_match_value;
-	spin_lock_init(&p->lock);
+	raw_spin_lock_init(&p->lock);
 
 	if (clockevent_rating)
 		sh_cmt_register_clockevent(p, name, clockevent_rating);
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index a2172f6..d9b76ca 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -43,7 +43,7 @@
 	struct clock_event_device ced;
 };
 
-static DEFINE_SPINLOCK(sh_mtu2_lock);
+static DEFINE_RAW_SPINLOCK(sh_mtu2_lock);
 
 #define TSTR -1 /* shared register */
 #define TCR  0 /* channel register */
@@ -107,7 +107,7 @@
 	unsigned long flags, value;
 
 	/* start stop register shared by multiple timer channels */
-	spin_lock_irqsave(&sh_mtu2_lock, flags);
+	raw_spin_lock_irqsave(&sh_mtu2_lock, flags);
 	value = sh_mtu2_read(p, TSTR);
 
 	if (start)
@@ -116,7 +116,7 @@
 		value &= ~(1 << cfg->timer_bit);
 
 	sh_mtu2_write(p, TSTR, value);
-	spin_unlock_irqrestore(&sh_mtu2_lock, flags);
+	raw_spin_unlock_irqrestore(&sh_mtu2_lock, flags);
 }
 
 static int sh_mtu2_enable(struct sh_mtu2_priv *p)
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 97f54b6..c1b51d4 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -45,7 +45,7 @@
 	struct clocksource cs;
 };
 
-static DEFINE_SPINLOCK(sh_tmu_lock);
+static DEFINE_RAW_SPINLOCK(sh_tmu_lock);
 
 #define TSTR -1 /* shared register */
 #define TCOR  0 /* channel register */
@@ -95,7 +95,7 @@
 	unsigned long flags, value;
 
 	/* start stop register shared by multiple timer channels */
-	spin_lock_irqsave(&sh_tmu_lock, flags);
+	raw_spin_lock_irqsave(&sh_tmu_lock, flags);
 	value = sh_tmu_read(p, TSTR);
 
 	if (start)
@@ -104,7 +104,7 @@
 		value &= ~(1 << cfg->timer_bit);
 
 	sh_tmu_write(p, TSTR, value);
-	spin_unlock_irqrestore(&sh_tmu_lock, flags);
+	raw_spin_unlock_irqrestore(&sh_tmu_lock, flags);
 }
 
 static int sh_tmu_enable(struct sh_tmu_priv *p)
@@ -245,12 +245,7 @@
 
 	sh_tmu_enable(p);
 
-	/* TODO: calculate good shift from rate and counter bit width */
-
-	ced->shift = 32;
-	ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift);
-	ced->max_delta_ns = clockevent_delta2ns(0xffffffff, ced);
-	ced->min_delta_ns = 5000;
+	clockevents_config(ced, p->rate);
 
 	if (periodic) {
 		p->periodic = (p->rate + HZ/2) / HZ;
@@ -323,7 +318,8 @@
 	ced->set_mode = sh_tmu_clock_event_mode;
 
 	dev_info(&p->pdev->dev, "used for clock events\n");
-	clockevents_register_device(ced);
+
+	clockevents_config_and_register(ced, 1, 0x300, 0xffffffff);
 
 	ret = setup_irq(p->irqaction.irq, &p->irqaction);
 	if (ret) {
diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index e23dc82..7212961 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -1626,4 +1626,4 @@
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
 MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index fb4f499..1dc2a4a 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -815,8 +815,6 @@
 
 	init_completion(&sdmac->done);
 
-	sdmac->buf_tail = 0;
-
 	return 0;
 out:
 
@@ -927,6 +925,8 @@
 
 	sdmac->flags = 0;
 
+	sdmac->buf_tail = 0;
+
 	dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n",
 			sg_len, channel);
 
@@ -1027,6 +1027,8 @@
 
 	sdmac->status = DMA_IN_PROGRESS;
 
+	sdmac->buf_tail = 0;
+
 	sdmac->flags |= IMX_DMA_SG_LOOP;
 	sdmac->direction = direction;
 	ret = sdma_load_context(sdmac);
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index cbcc28e..e4feba6 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -392,6 +392,8 @@
 	struct pl330_reqcfg *cfg;
 	/* Pointer to first xfer in the request. */
 	struct pl330_xfer *x;
+	/* Hook to attach to DMAC's list of reqs with due callback */
+	struct list_head rqd;
 };
 
 /*
@@ -461,8 +463,6 @@
 	/* Number of bytes taken to setup MC for the req */
 	u32 mc_len;
 	struct pl330_req *r;
-	/* Hook to attach to DMAC's list of reqs with due callback */
-	struct list_head rqd;
 };
 
 /* ToBeDone for tasklet */
@@ -1683,7 +1683,7 @@
 /* Returns 1 if state was updated, 0 otherwise */
 static int pl330_update(const struct pl330_info *pi)
 {
-	struct _pl330_req *rqdone;
+	struct pl330_req *rqdone, *tmp;
 	struct pl330_dmac *pl330;
 	unsigned long flags;
 	void __iomem *regs;
@@ -1750,7 +1750,10 @@
 			if (active == -1) /* Aborted */
 				continue;
 
-			rqdone = &thrd->req[active];
+			/* Detach the req */
+			rqdone = thrd->req[active].r;
+			thrd->req[active].r = NULL;
+
 			mark_free(thrd, active);
 
 			/* Get going again ASAP */
@@ -1762,20 +1765,11 @@
 	}
 
 	/* Now that we are in no hurry, do the callbacks */
-	while (!list_empty(&pl330->req_done)) {
-		struct pl330_req *r;
-
-		rqdone = container_of(pl330->req_done.next,
-					struct _pl330_req, rqd);
-
-		list_del_init(&rqdone->rqd);
-
-		/* Detach the req */
-		r = rqdone->r;
-		rqdone->r = NULL;
+	list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) {
+		list_del(&rqdone->rqd);
 
 		spin_unlock_irqrestore(&pl330->lock, flags);
-		_callback(r, PL330_ERR_NONE);
+		_callback(rqdone, PL330_ERR_NONE);
 		spin_lock_irqsave(&pl330->lock, flags);
 	}
 
@@ -2321,7 +2315,7 @@
 	/* Pick up ripe tomatoes */
 	list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
 		if (desc->status == DONE) {
-			if (pch->cyclic)
+			if (!pch->cyclic)
 				dma_cookie_complete(&desc->txd);
 			list_move_tail(&desc->node, &list);
 		}
@@ -2539,7 +2533,7 @@
 }
 
 /* Returns the number of descriptors added to the DMAC pool */
-int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
+static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
 {
 	struct dma_pl330_desc *desc;
 	unsigned long flags;
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 10f3750..de5ba86e 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -164,7 +164,7 @@
 	else
 		return (char *)ptr;
 
-	r = size % align;
+	r = (unsigned long)p % align;
 
 	if (r == 0)
 		return (char *)ptr;
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index d27778f..a499c7e 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -1814,12 +1814,6 @@
 	if (mce->bank != 8)
 		return NOTIFY_DONE;
 
-#ifdef CONFIG_SMP
-	/* Only handle if it is the right mc controller */
-	if (mce->socketid != pvt->i7core_dev->socket)
-		return NOTIFY_DONE;
-#endif
-
 	smp_rmb();
 	if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
 		smp_wmb();
@@ -2116,8 +2110,6 @@
 	if (pvt->enable_scrub)
 		disable_sdram_scrub_setting(mci);
 
-	mce_unregister_decode_chain(&i7_mce_dec);
-
 	/* Disable EDAC polling */
 	i7core_pci_ctl_release(pvt);
 
@@ -2222,8 +2214,6 @@
 	/* DCLK for scrub rate setting */
 	pvt->dclk_freq = get_dclk_freq();
 
-	mce_register_decode_chain(&i7_mce_dec);
-
 	return 0;
 
 fail0:
@@ -2367,8 +2357,10 @@
 
 	pci_rc = pci_register_driver(&i7core_driver);
 
-	if (pci_rc >= 0)
+	if (pci_rc >= 0) {
+		mce_register_decode_chain(&i7_mce_dec);
 		return 0;
+	}
 
 	i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
 		      pci_rc);
@@ -2384,6 +2376,7 @@
 {
 	debugf2("MC: " __FILE__ ": %s()\n", __func__);
 	pci_unregister_driver(&i7core_driver);
+	mce_unregister_decode_chain(&i7_mce_dec);
 }
 
 module_init(i7core_init);
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 4c402353..0e37462 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -980,7 +980,8 @@
 	layers[1].type = EDAC_MC_LAYER_CHANNEL;
 	layers[1].size = 1;
 	layers[1].is_virt_csrow = false;
-	mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), sizeof(*pdata));
+	mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers,
+			    sizeof(*pdata));
 	if (!mci) {
 		devres_release_group(&op->dev, mpc85xx_mc_err_probe);
 		return -ENOMEM;
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 4adaf4b..36ad17e 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -555,7 +555,7 @@
 		pvt->is_close_pg = false;
 	}
 
-	pci_read_config_dword(pvt->pci_ta, RANK_CFG_A, &reg);
+	pci_read_config_dword(pvt->pci_ddrio, RANK_CFG_A, &reg);
 	if (IS_RDIMM_ENABLED(reg)) {
 		/* FIXME: Can also be LRDIMM */
 		debugf0("Memory is registered\n");
@@ -1604,8 +1604,6 @@
 	debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
 		__func__, mci, &sbridge_dev->pdev[0]->dev);
 
-	mce_unregister_decode_chain(&sbridge_mce_dec);
-
 	/* Remove MC sysfs nodes */
 	edac_mc_del_mc(mci->dev);
 
@@ -1682,7 +1680,6 @@
 		goto fail0;
 	}
 
-	mce_register_decode_chain(&sbridge_mce_dec);
 	return 0;
 
 fail0:
@@ -1811,8 +1808,10 @@
 
 	pci_rc = pci_register_driver(&sbridge_driver);
 
-	if (pci_rc >= 0)
+	if (pci_rc >= 0) {
+		mce_register_decode_chain(&sbridge_mce_dec);
 		return 0;
+	}
 
 	sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n",
 		      pci_rc);
@@ -1828,6 +1827,7 @@
 {
 	debugf2("MC: " __FILE__ ": %s()\n", __func__);
 	pci_unregister_driver(&sbridge_driver);
+	mce_unregister_decode_chain(&sbridge_mce_dec);
 }
 
 module_init(sbridge_init);
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 23416e4..a4ed30b 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -116,8 +116,8 @@
 	[5] = "Charge-downstream",
 	[6] = "MHL",
 	[7] = "Dock-desk",
-	[7] = "Dock-card",
-	[8] = "JIG",
+	[8] = "Dock-card",
+	[9] = "JIG",
 
 	NULL,
 };
@@ -514,6 +514,7 @@
 
 	extcon_dev_unregister(info->edev);
 
+	kfree(info->edev);
 	kfree(info);
 
 	return 0;
diff --git a/drivers/extcon/extcon_class.c b/drivers/extcon/extcon_class.c
index f598a70..159aeb0 100644
--- a/drivers/extcon/extcon_class.c
+++ b/drivers/extcon/extcon_class.c
@@ -762,7 +762,7 @@
 #if defined(CONFIG_ANDROID)
 	if (switch_class)
 		ret = class_compat_create_link(switch_class, edev->dev,
-					       dev);
+					       NULL);
 #endif /* CONFIG_ANDROID */
 
 	spin_lock_init(&edev->lock);
diff --git a/drivers/extcon/extcon_gpio.c b/drivers/extcon/extcon_gpio.c
index fe7a07b..8a0dcc1 100644
--- a/drivers/extcon/extcon_gpio.c
+++ b/drivers/extcon/extcon_gpio.c
@@ -125,6 +125,7 @@
 	if (ret < 0)
 		goto err_request_irq;
 
+	platform_set_drvdata(pdev, extcon_data);
 	/* Perform initial detection */
 	gpio_extcon_work(&extcon_data->work.work);
 
@@ -146,6 +147,7 @@
 	struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev);
 
 	cancel_delayed_work_sync(&extcon_data->work);
+	free_irq(extcon_data->irq, extcon_data);
 	gpio_free(extcon_data->gpio);
 	extcon_dev_unregister(&extcon_data->edev);
 	devm_kfree(&pdev->dev, extcon_data);
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index eb92fe2..a8743c3 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -610,7 +610,7 @@
 drm_monitor_supports_rb(struct edid *edid)
 {
 	if (edid->revision >= 4) {
-		bool ret;
+		bool ret = false;
 		drm_for_each_detailed_block((u8 *)edid, is_rb, &ret);
 		return ret;
 	}
@@ -1039,6 +1039,24 @@
 	return true;
 }
 
+static bool valid_inferred_mode(const struct drm_connector *connector,
+				const struct drm_display_mode *mode)
+{
+	struct drm_display_mode *m;
+	bool ok = false;
+
+	list_for_each_entry(m, &connector->probed_modes, head) {
+		if (mode->hdisplay == m->hdisplay &&
+		    mode->vdisplay == m->vdisplay &&
+		    drm_mode_vrefresh(mode) == drm_mode_vrefresh(m))
+			return false; /* duplicated */
+		if (mode->hdisplay <= m->hdisplay &&
+		    mode->vdisplay <= m->vdisplay)
+			ok = true;
+	}
+	return ok;
+}
+
 static int
 drm_dmt_modes_for_range(struct drm_connector *connector, struct edid *edid,
 			struct detailed_timing *timing)
@@ -1048,7 +1066,8 @@
 	struct drm_device *dev = connector->dev;
 
 	for (i = 0; i < drm_num_dmt_modes; i++) {
-		if (mode_in_range(drm_dmt_modes + i, edid, timing)) {
+		if (mode_in_range(drm_dmt_modes + i, edid, timing) &&
+		    valid_inferred_mode(connector, drm_dmt_modes + i)) {
 			newmode = drm_mode_duplicate(dev, &drm_dmt_modes[i]);
 			if (newmode) {
 				drm_mode_probed_add(connector, newmode);
@@ -1088,7 +1107,8 @@
 			return modes;
 
 		fixup_mode_1366x768(newmode);
-		if (!mode_in_range(newmode, edid, timing)) {
+		if (!mode_in_range(newmode, edid, timing) ||
+		    !valid_inferred_mode(connector, newmode)) {
 			drm_mode_destroy(dev, newmode);
 			continue;
 		}
@@ -1116,7 +1136,8 @@
 			return modes;
 
 		fixup_mode_1366x768(newmode);
-		if (!mode_in_range(newmode, edid, timing)) {
+		if (!mode_in_range(newmode, edid, timing) ||
+		    !valid_inferred_mode(connector, newmode)) {
 			drm_mode_destroy(dev, newmode);
 			continue;
 		}
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index f947926..36822b9 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1401,6 +1401,27 @@
 	}
 }
 
+static void i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
+{
+	struct apertures_struct *ap;
+	struct pci_dev *pdev = dev_priv->dev->pdev;
+	bool primary;
+
+	ap = alloc_apertures(1);
+	if (!ap)
+		return;
+
+	ap->ranges[0].base = dev_priv->dev->agp->base;
+	ap->ranges[0].size =
+		dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
+	primary =
+		pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+
+	remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
+
+	kfree(ap);
+}
+
 /**
  * i915_driver_load - setup chip and create an initial config
  * @dev: DRM device
@@ -1446,6 +1467,15 @@
 		goto free_priv;
 	}
 
+	dev_priv->mm.gtt = intel_gtt_get();
+	if (!dev_priv->mm.gtt) {
+		DRM_ERROR("Failed to initialize GTT\n");
+		ret = -ENODEV;
+		goto put_bridge;
+	}
+
+	i915_kick_out_firmware_fb(dev_priv);
+
 	pci_set_master(dev->pdev);
 
 	/* overlay on gen2 is broken and can't address above 1G */
@@ -1471,13 +1501,6 @@
 		goto put_bridge;
 	}
 
-	dev_priv->mm.gtt = intel_gtt_get();
-	if (!dev_priv->mm.gtt) {
-		DRM_ERROR("Failed to initialize GTT\n");
-		ret = -ENODEV;
-		goto out_rmmap;
-	}
-
 	aperture_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
 
 	dev_priv->mm.gtt_mapping =
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index b1fe0ed..ed3224c 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -412,7 +412,6 @@
 	 */
 
 	spin_lock_irqsave(&dev_priv->rps_lock, flags);
-	WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n");
 	dev_priv->pm_iir |= pm_iir;
 	I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
 	POSTING_READ(GEN6_PMIMR);
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 0ede02a..a748e5c 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -740,8 +740,11 @@
 	if (HAS_PCH_SPLIT(dev)) {
 		I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL);
 		I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2);
-		I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
+		/* NOTE: BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2;
+		 * otherwise we get blank eDP screen after S3 on some machines
+		 */
 		I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2);
+		I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
 		I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
 		I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
 		I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e0aa064..a8538ac 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6558,7 +6558,7 @@
 		if (I915_READ(HDMIC) & PORT_DETECTED)
 			intel_hdmi_init(dev, HDMIC);
 
-		if (I915_READ(HDMID) & PORT_DETECTED)
+		if (!dpd_is_edp && I915_READ(HDMID) & PORT_DETECTED)
 			intel_hdmi_init(dev, HDMID);
 
 		if (I915_READ(PCH_DP_C) & DP_DETECTED)
@@ -6921,19 +6921,6 @@
 	POSTING_READ(vga_reg);
 }
 
-static void ivb_pch_pwm_override(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	/*
-	 * IVB has CPU eDP backlight regs too, set things up to let the
-	 * PCH regs control the backlight
-	 */
-	I915_WRITE(BLC_PWM_CPU_CTL2, PWM_ENABLE);
-	I915_WRITE(BLC_PWM_CPU_CTL, 0);
-	I915_WRITE(BLC_PWM_PCH_CTL1, PWM_ENABLE | (1<<30));
-}
-
 void intel_modeset_init_hw(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -6950,9 +6937,6 @@
 		gen6_enable_rps(dev_priv);
 		gen6_update_ring_freq(dev_priv);
 	}
-
-	if (IS_IVYBRIDGE(dev))
-		ivb_pch_pwm_override(dev);
 }
 
 void intel_modeset_init(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 296cfc2..c044932 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -32,6 +32,7 @@
 #include "drm.h"
 #include "drm_crtc.h"
 #include "drm_crtc_helper.h"
+#include "drm_edid.h"
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
@@ -67,6 +68,8 @@
 	struct drm_display_mode *panel_fixed_mode;  /* for eDP */
 	struct delayed_work panel_vdd_work;
 	bool want_panel_vdd;
+	struct edid *edid; /* cached EDID for eDP */
+	int edid_mode_count;
 };
 
 /**
@@ -371,7 +374,7 @@
 	int recv_bytes;
 	uint32_t status;
 	uint32_t aux_clock_divider;
-	int try, precharge = 5;
+	int try, precharge;
 
 	intel_dp_check_edp(intel_dp);
 	/* The clock divider is based off the hrawclk,
@@ -391,6 +394,11 @@
 	else
 		aux_clock_divider = intel_hrawclk(dev) / 2;
 
+	if (IS_GEN6(dev))
+		precharge = 3;
+	else
+		precharge = 5;
+
 	/* Try to wait for any previous AUX channel activity */
 	for (try = 0; try < 3; try++) {
 		status = I915_READ(ch_ctl);
@@ -1973,6 +1981,8 @@
 	if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT))
 		return;
 
+	ironlake_edp_panel_vdd_on(intel_dp);
+
 	if (intel_dp_aux_native_read_retry(intel_dp, DP_SINK_OUI, buf, 3))
 		DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n",
 			      buf[0], buf[1], buf[2]);
@@ -1980,6 +1990,8 @@
 	if (intel_dp_aux_native_read_retry(intel_dp, DP_BRANCH_OUI, buf, 3))
 		DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n",
 			      buf[0], buf[1], buf[2]);
+
+	ironlake_edp_panel_vdd_off(intel_dp, false);
 }
 
 static bool
@@ -2116,10 +2128,22 @@
 {
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
 	struct edid	*edid;
+	int size;
 
-	ironlake_edp_panel_vdd_on(intel_dp);
+	if (is_edp(intel_dp)) {
+		if (!intel_dp->edid)
+			return NULL;
+
+		size = (intel_dp->edid->extensions + 1) * EDID_LENGTH;
+		edid = kmalloc(size, GFP_KERNEL);
+		if (!edid)
+			return NULL;
+
+		memcpy(edid, intel_dp->edid, size);
+		return edid;
+	}
+
 	edid = drm_get_edid(connector, adapter);
-	ironlake_edp_panel_vdd_off(intel_dp, false);
 	return edid;
 }
 
@@ -2129,9 +2153,17 @@
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
 	int	ret;
 
-	ironlake_edp_panel_vdd_on(intel_dp);
+	if (is_edp(intel_dp)) {
+		drm_mode_connector_update_edid_property(connector,
+							intel_dp->edid);
+		ret = drm_add_edid_modes(connector, intel_dp->edid);
+		drm_edid_to_eld(connector,
+				intel_dp->edid);
+		connector->display_info.raw_edid = NULL;
+		return intel_dp->edid_mode_count;
+	}
+
 	ret = intel_ddc_get_modes(connector, adapter);
-	ironlake_edp_panel_vdd_off(intel_dp, false);
 	return ret;
 }
 
@@ -2321,6 +2353,7 @@
 	i2c_del_adapter(&intel_dp->adapter);
 	drm_encoder_cleanup(encoder);
 	if (is_edp(intel_dp)) {
+		kfree(intel_dp->edid);
 		cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
 		ironlake_panel_vdd_off_sync(intel_dp);
 	}
@@ -2504,11 +2537,14 @@
 			break;
 	}
 
+	intel_dp_i2c_init(intel_dp, intel_connector, name);
+
 	/* Cache some DPCD data in the eDP case */
 	if (is_edp(intel_dp)) {
 		bool ret;
 		struct edp_power_seq	cur, vbt;
 		u32 pp_on, pp_off, pp_div;
+		struct edid *edid;
 
 		pp_on = I915_READ(PCH_PP_ON_DELAYS);
 		pp_off = I915_READ(PCH_PP_OFF_DELAYS);
@@ -2576,9 +2612,19 @@
 			intel_dp_destroy(&intel_connector->base);
 			return;
 		}
-	}
 
-	intel_dp_i2c_init(intel_dp, intel_connector, name);
+		ironlake_edp_panel_vdd_on(intel_dp);
+		edid = drm_get_edid(connector, &intel_dp->adapter);
+		if (edid) {
+			drm_mode_connector_update_edid_property(connector,
+								edid);
+			intel_dp->edid_mode_count =
+				drm_add_edid_modes(connector, edid);
+			drm_edid_to_eld(connector, edid);
+			intel_dp->edid = edid;
+		}
+		ironlake_edp_panel_vdd_off(intel_dp, false);
+	}
 
 	intel_encoder->hot_plug = intel_dp_hot_plug;
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 153b9a1..1074bc5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -467,7 +467,7 @@
 	nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs;
 
 	ret = drm_fb_helper_init(dev, &nfbdev->helper,
-				 nv_two_heads(dev) ? 2 : 1, 4);
+				 dev->mode_config.num_crtc, 4);
 	if (ret) {
 		kfree(nfbdev);
 		return ret;
diff --git a/drivers/gpu/drm/nouveau/nouveau_prime.c b/drivers/gpu/drm/nouveau/nouveau_prime.c
index a89240e..a25cf2cb 100644
--- a/drivers/gpu/drm/nouveau/nouveau_prime.c
+++ b/drivers/gpu/drm/nouveau/nouveau_prime.c
@@ -1,3 +1,26 @@
+/*
+ * Copyright 2011 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ */
 
 #include "drmP.h"
 #include "drm.h"
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 01d77d1..3904d79 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1149,7 +1149,9 @@
 	}
 
 	if (tiling_flags & RADEON_TILING_MACRO) {
-		if (rdev->family >= CHIP_CAYMAN)
+		if (rdev->family >= CHIP_TAHITI)
+			tmp = rdev->config.si.tile_config;
+		else if (rdev->family >= CHIP_CAYMAN)
 			tmp = rdev->config.cayman.tile_config;
 		else
 			tmp = rdev->config.evergreen.tile_config;
@@ -1177,6 +1179,12 @@
 	} else if (tiling_flags & RADEON_TILING_MICRO)
 		fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1);
 
+	if ((rdev->family == CHIP_TAHITI) ||
+	    (rdev->family == CHIP_PITCAIRN))
+		fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P8_32x32_8x16);
+	else if (rdev->family == CHIP_VERDE)
+		fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P4_8x16);
+
 	switch (radeon_crtc->crtc_id) {
 	case 0:
 		WREG32(AVIVO_D1VGA_CONTROL, 0);
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index e7b1ec5..486ccdf 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -1926,7 +1926,9 @@
 
 	if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
 		r600_hdmi_enable(encoder);
-		if (ASIC_IS_DCE4(rdev))
+		if (ASIC_IS_DCE6(rdev))
+			; /* TODO (use pointers instead of if-s?) */
+		else if (ASIC_IS_DCE4(rdev))
 			evergreen_hdmi_setmode(encoder, adjusted_mode);
 		else
 			r600_hdmi_setmode(encoder, adjusted_mode);
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 01550d0..7fb3d2e 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1932,6 +1932,9 @@
 	smx_dc_ctl0 |= NUMBER_OF_SETS(rdev->config.evergreen.sx_num_of_sets);
 	WREG32(SMX_DC_CTL0, smx_dc_ctl0);
 
+	if (rdev->family <= CHIP_SUMO2)
+		WREG32(SMX_SAR_CTL0, 0x00010000);
+
 	WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_size / 4) - 1) |
 					POSITION_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_pos_size / 4) - 1) |
 					SMX_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_smx_size / 4) - 1)));
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
index 4e7dd2b..c1655412 100644
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -52,6 +52,7 @@
 	u32			cb_color_view[12];
 	u32			cb_color_pitch[12];
 	u32			cb_color_slice[12];
+	u32			cb_color_slice_idx[12];
 	u32			cb_color_attrib[12];
 	u32			cb_color_cmask_slice[8];/* unused */
 	u32			cb_color_fmask_slice[8];/* unused */
@@ -127,12 +128,14 @@
 		track->cb_color_info[i] = 0;
 		track->cb_color_view[i] = 0xFFFFFFFF;
 		track->cb_color_pitch[i] = 0;
-		track->cb_color_slice[i] = 0;
+		track->cb_color_slice[i] = 0xfffffff;
+		track->cb_color_slice_idx[i] = 0;
 	}
 	track->cb_target_mask = 0xFFFFFFFF;
 	track->cb_shader_mask = 0xFFFFFFFF;
 	track->cb_dirty = true;
 
+	track->db_depth_slice = 0xffffffff;
 	track->db_depth_view = 0xFFFFC000;
 	track->db_depth_size = 0xFFFFFFFF;
 	track->db_depth_control = 0xFFFFFFFF;
@@ -250,10 +253,9 @@
 {
 	struct evergreen_cs_track *track = p->track;
 	unsigned palign, halign, tileb, slice_pt;
+	unsigned mtile_pr, mtile_ps, mtileb;
 
 	tileb = 64 * surf->bpe * surf->nsamples;
-	palign = track->group_size / (8 * surf->bpe * surf->nsamples);
-	palign = MAX(8, palign);
 	slice_pt = 1;
 	if (tileb > surf->tsplit) {
 		slice_pt = tileb / surf->tsplit;
@@ -262,7 +264,10 @@
 	/* macro tile width & height */
 	palign = (8 * surf->bankw * track->npipes) * surf->mtilea;
 	halign = (8 * surf->bankh * surf->nbanks) / surf->mtilea;
-	surf->layer_size = surf->nbx * surf->nby * surf->bpe * slice_pt;
+	mtileb = (palign / 8) * (halign / 8) * tileb;;
+	mtile_pr = surf->nbx / palign;
+	mtile_ps = (mtile_pr * surf->nby) / halign;
+	surf->layer_size = mtile_ps * mtileb * slice_pt;
 	surf->base_align = (palign / 8) * (halign / 8) * tileb;
 	surf->palign = palign;
 	surf->halign = halign;
@@ -434,6 +439,39 @@
 
 	offset += surf.layer_size * mslice;
 	if (offset > radeon_bo_size(track->cb_color_bo[id])) {
+		/* old ddx are broken they allocate bo with w*h*bpp but
+		 * program slice with ALIGN(h, 8), catch this and patch
+		 * command stream.
+		 */
+		if (!surf.mode) {
+			volatile u32 *ib = p->ib.ptr;
+			unsigned long tmp, nby, bsize, size, min = 0;
+
+			/* find the height the ddx wants */
+			if (surf.nby > 8) {
+				min = surf.nby - 8;
+			}
+			bsize = radeon_bo_size(track->cb_color_bo[id]);
+			tmp = track->cb_color_bo_offset[id] << 8;
+			for (nby = surf.nby; nby > min; nby--) {
+				size = nby * surf.nbx * surf.bpe * surf.nsamples;
+				if ((tmp + size * mslice) <= bsize) {
+					break;
+				}
+			}
+			if (nby > min) {
+				surf.nby = nby;
+				slice = ((nby * surf.nbx) / 64) - 1;
+				if (!evergreen_surface_check(p, &surf, "cb")) {
+					/* check if this one works */
+					tmp += surf.layer_size * mslice;
+					if (tmp <= bsize) {
+						ib[track->cb_color_slice_idx[id]] = slice;
+						goto old_ddx_ok;
+					}
+				}
+			}
+		}
 		dev_warn(p->dev, "%s:%d cb[%d] bo too small (layer size %d, "
 			 "offset %d, max layer %d, bo size %ld, slice %d)\n",
 			 __func__, __LINE__, id, surf.layer_size,
@@ -446,6 +484,7 @@
 			surf.tsplit, surf.mtilea);
 		return -EINVAL;
 	}
+old_ddx_ok:
 
 	return 0;
 }
@@ -1532,6 +1571,7 @@
 	case CB_COLOR7_SLICE:
 		tmp = (reg - CB_COLOR0_SLICE) / 0x3c;
 		track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx);
+		track->cb_color_slice_idx[tmp] = idx;
 		track->cb_dirty = true;
 		break;
 	case CB_COLOR8_SLICE:
@@ -1540,6 +1580,7 @@
 	case CB_COLOR11_SLICE:
 		tmp = ((reg - CB_COLOR8_SLICE) / 0x1c) + 8;
 		track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx);
+		track->cb_color_slice_idx[tmp] = idx;
 		track->cb_dirty = true;
 		break;
 	case CB_COLOR0_ATTRIB:
diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c
index a51f880..65c5416 100644
--- a/drivers/gpu/drm/radeon/evergreen_hdmi.c
+++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c
@@ -156,9 +156,6 @@
 	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
 	uint32_t offset;
 
-	if (ASIC_IS_DCE5(rdev))
-		return;
-
 	/* Silent, r600_hdmi_enable will raise WARN for us */
 	if (!dig->afmt->enabled)
 		return;
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index 2773039..b50b15c70 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -503,6 +503,7 @@
 #define	SCRATCH_UMSK					0x8540
 #define	SCRATCH_ADDR					0x8544
 
+#define	SMX_SAR_CTL0					0xA008
 #define	SMX_DC_CTL0					0xA020
 #define		USE_HASH_FUNCTION				(1 << 0)
 #define		NUMBER_OF_SETS(x)				((x) << 1)
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 3186522..b7bf18e 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1303,6 +1303,10 @@
 	if (r)
 		return r;
 
+	r = r600_audio_init(rdev);
+	if (r)
+		return r;
+
 	return 0;
 }
 
@@ -1329,6 +1333,7 @@
 
 int cayman_suspend(struct radeon_device *rdev)
 {
+	r600_audio_fini(rdev);
 	/* FIXME: we should wait for ring to be empty */
 	radeon_ib_pool_suspend(rdev);
 	radeon_vm_manager_suspend(rdev);
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index f30dc95..bff6272 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -1839,6 +1839,7 @@
 	WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
 			       NUM_CLIP_SEQ(3)));
 	WREG32(PA_SC_ENHANCE, FORCE_EOV_MAX_CLK_CNT(4095));
+	WREG32(VC_ENHANCE, 0);
 }
 
 
diff --git a/drivers/gpu/drm/radeon/r600_audio.c b/drivers/gpu/drm/radeon/r600_audio.c
index 7479a5c..79b5591 100644
--- a/drivers/gpu/drm/radeon/r600_audio.c
+++ b/drivers/gpu/drm/radeon/r600_audio.c
@@ -57,7 +57,7 @@
  */
 static int r600_audio_chipset_supported(struct radeon_device *rdev)
 {
-	return (rdev->family >= CHIP_R600 && !ASIC_IS_DCE5(rdev))
+	return (rdev->family >= CHIP_R600 && !ASIC_IS_DCE6(rdev))
 		|| rdev->family == CHIP_RS600
 		|| rdev->family == CHIP_RS690
 		|| rdev->family == CHIP_RS740;
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 0133f5f..ca87f7a 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -2079,6 +2079,48 @@
 			return -EINVAL;
 		}
 		break;
+	case PACKET3_STRMOUT_BASE_UPDATE:
+		if (p->family < CHIP_RV770) {
+			DRM_ERROR("STRMOUT_BASE_UPDATE only supported on 7xx\n");
+			return -EINVAL;
+		}
+		if (pkt->count != 1) {
+			DRM_ERROR("bad STRMOUT_BASE_UPDATE packet count\n");
+			return -EINVAL;
+		}
+		if (idx_value > 3) {
+			DRM_ERROR("bad STRMOUT_BASE_UPDATE index\n");
+			return -EINVAL;
+		}
+		{
+			u64 offset;
+
+			r = r600_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("bad STRMOUT_BASE_UPDATE reloc\n");
+				return -EINVAL;
+			}
+
+			if (reloc->robj != track->vgt_strmout_bo[idx_value]) {
+				DRM_ERROR("bad STRMOUT_BASE_UPDATE, bo does not match\n");
+				return -EINVAL;
+			}
+
+			offset = radeon_get_ib_value(p, idx+1) << 8;
+			if (offset != track->vgt_strmout_bo_offset[idx_value]) {
+				DRM_ERROR("bad STRMOUT_BASE_UPDATE, bo offset does not match: 0x%llx, 0x%x\n",
+					  offset, track->vgt_strmout_bo_offset[idx_value]);
+				return -EINVAL;
+			}
+
+			if ((offset + 4) > radeon_bo_size(reloc->robj)) {
+				DRM_ERROR("bad STRMOUT_BASE_UPDATE bo too small: 0x%llx, 0x%lx\n",
+					  offset + 4, radeon_bo_size(reloc->robj));
+				return -EINVAL;
+			}
+			ib[idx+1] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+		}
+		break;
 	case PACKET3_SURFACE_BASE_UPDATE:
 		if (p->family >= CHIP_RV770 || p->family == CHIP_R600) {
 			DRM_ERROR("bad SURFACE_BASE_UPDATE\n");
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index 969c275..82a0a4c 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -322,9 +322,6 @@
 	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
 	uint32_t offset;
 
-	if (ASIC_IS_DCE5(rdev))
-		return;
-
 	/* Silent, r600_hdmi_enable will raise WARN for us */
 	if (!dig->afmt->enabled)
 		return;
@@ -483,7 +480,7 @@
 	uint32_t offset;
 	u32 hdmi;
 
-	if (ASIC_IS_DCE5(rdev))
+	if (ASIC_IS_DCE6(rdev))
 		return;
 
 	/* Silent, r600_hdmi_enable will raise WARN for us */
@@ -543,7 +540,7 @@
 	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
 	uint32_t offset;
 
-	if (ASIC_IS_DCE5(rdev))
+	if (ASIC_IS_DCE6(rdev))
 		return;
 
 	/* Called for ATOM_ENCODER_MODE_HDMI only */
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index a0dbf1f..025fd5b 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -485,6 +485,7 @@
 #define		TC_L2_SIZE(x)					((x)<<5)
 #define		L2_DISABLE_LATE_HIT				(1<<9)
 
+#define	VC_ENHANCE					0x9714
 
 #define	VGT_CACHE_INVALIDATION				0x88C4
 #define		CACHE_INVALIDATION(x)				((x)<<0)
@@ -1163,6 +1164,7 @@
 #define	PACKET3_SET_CTL_CONST				0x6F
 #define		PACKET3_SET_CTL_CONST_OFFSET			0x0003cff0
 #define		PACKET3_SET_CTL_CONST_END			0x0003e200
+#define	PACKET3_STRMOUT_BASE_UPDATE			0x72 /* r7xx */
 #define	PACKET3_SURFACE_BASE_UPDATE			0x73
 
 
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index f0bb2b5..2c4d53f 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -57,9 +57,11 @@
  *   2.13.0 - virtual memory support, streamout
  *   2.14.0 - add evergreen tiling informations
  *   2.15.0 - add max_pipes query
+ *   2.16.0 - fix evergreen 2D tiled surface calculation
+ *   2.17.0 - add STRMOUT_BASE_UPDATE for r7xx
  */
 #define KMS_DRIVER_MAJOR	2
-#define KMS_DRIVER_MINOR	15
+#define KMS_DRIVER_MINOR	17
 #define KMS_DRIVER_PATCHLEVEL	0
 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
 int radeon_driver_unload_kms(struct drm_device *dev);
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index 59d4493..84b648a 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -289,8 +289,9 @@
 	rdev->vm_manager.enabled = false;
 
 	/* mark first vm as always in use, it's the system one */
+	/* allocate enough for 2 full VM pts */
 	r = radeon_sa_bo_manager_init(rdev, &rdev->vm_manager.sa_manager,
-				      rdev->vm_manager.max_pfn * 8,
+				      rdev->vm_manager.max_pfn * 8 * 2,
 				      RADEON_GEM_DOMAIN_VRAM);
 	if (r) {
 		dev_err(rdev->dev, "failed to allocate vm bo (%dKB)\n",
@@ -633,7 +634,15 @@
 	mutex_init(&vm->mutex);
 	INIT_LIST_HEAD(&vm->list);
 	INIT_LIST_HEAD(&vm->va);
-	vm->last_pfn = 0;
+	/* SI requires equal sized PTs for all VMs, so always set
+	 * last_pfn to max_pfn.  cayman allows variable sized
+	 * pts so we can grow then as needed.  Once we switch
+	 * to two level pts we can unify this again.
+	 */
+	if (rdev->family >= CHIP_TAHITI)
+		vm->last_pfn = rdev->vm_manager.max_pfn;
+	else
+		vm->last_pfn = 0;
 	/* map the ib pool buffer at 0 in virtual address space, set
 	 * read only
 	 */
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index f28bd4b..21ec9f5 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -292,6 +292,7 @@
 int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
 			  struct drm_file *filp)
 {
+	struct radeon_device *rdev = dev->dev_private;
 	struct drm_radeon_gem_busy *args = data;
 	struct drm_gem_object *gobj;
 	struct radeon_bo *robj;
@@ -317,13 +318,14 @@
 		break;
 	}
 	drm_gem_object_unreference_unlocked(gobj);
-	r = radeon_gem_handle_lockup(robj->rdev, r);
+	r = radeon_gem_handle_lockup(rdev, r);
 	return r;
 }
 
 int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
 			      struct drm_file *filp)
 {
+	struct radeon_device *rdev = dev->dev_private;
 	struct drm_radeon_gem_wait_idle *args = data;
 	struct drm_gem_object *gobj;
 	struct radeon_bo *robj;
@@ -336,10 +338,10 @@
 	robj = gem_to_radeon_bo(gobj);
 	r = radeon_bo_wait(robj, NULL, false);
 	/* callback hw specific functions if any */
-	if (robj->rdev->asic->ioctl_wait_idle)
-		robj->rdev->asic->ioctl_wait_idle(robj->rdev, robj);
+	if (rdev->asic->ioctl_wait_idle)
+		robj->rdev->asic->ioctl_wait_idle(rdev, robj);
 	drm_gem_object_unreference_unlocked(gobj);
-	r = radeon_gem_handle_lockup(robj->rdev, r);
+	r = radeon_gem_handle_lockup(rdev, r);
 	return r;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 0882554..5b37e28 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -801,9 +801,13 @@
 		int i;
 
 		for (i = 0; i < RADEON_NUM_RINGS; ++i) {
-			not_processed += radeon_fence_count_emitted(rdev, i);
-			if (not_processed >= 3)
-				break;
+			struct radeon_ring *ring = &rdev->ring[i];
+
+			if (ring->ready) {
+				not_processed += radeon_fence_count_emitted(rdev, i);
+				if (not_processed >= 3)
+					break;
+			}
 		}
 
 		if (not_processed >= 3) { /* should upclock */
diff --git a/drivers/gpu/drm/radeon/radeon_prime.c b/drivers/gpu/drm/radeon/radeon_prime.c
index 8ddab4c7..6bef46a 100644
--- a/drivers/gpu/drm/radeon/radeon_prime.c
+++ b/drivers/gpu/drm/radeon/radeon_prime.c
@@ -169,11 +169,17 @@
 	struct radeon_bo *bo = gem_to_radeon_bo(obj);
 	int ret = 0;
 
-	/* pin buffer into GTT */
-	ret = radeon_bo_pin(bo, RADEON_GEM_DOMAIN_GTT, NULL);
-	if (ret)
+	ret = radeon_bo_reserve(bo, false);
+	if (unlikely(ret != 0))
 		return ERR_PTR(ret);
 
+	/* pin buffer into GTT */
+	ret = radeon_bo_pin(bo, RADEON_GEM_DOMAIN_GTT, NULL);
+	if (ret) {
+		radeon_bo_unreserve(bo);
+		return ERR_PTR(ret);
+	}
+	radeon_bo_unreserve(bo);
 	return dma_buf_export(bo, &radeon_dmabuf_ops, obj->size, flags);
 }
 
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 4ad0281..b4f51c5 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -616,6 +616,9 @@
 				       ACK_FLUSH_CTL(3) |
 				       SYNC_FLUSH_CTL));
 
+	if (rdev->family != CHIP_RV770)
+		WREG32(SMX_SAR_CTL0, 0x00003f3f);
+
 	db_debug3 = RREG32(DB_DEBUG3);
 	db_debug3 &= ~DB_CLK_OFF_DELAY(0x1f);
 	switch (rdev->family) {
@@ -792,7 +795,7 @@
 
 	WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
 					  NUM_CLIP_SEQ(3)));
-
+	WREG32(VC_ENHANCE, 0);
 }
 
 void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
diff --git a/drivers/gpu/drm/radeon/rv770d.h b/drivers/gpu/drm/radeon/rv770d.h
index fdc0898..b0adfc5 100644
--- a/drivers/gpu/drm/radeon/rv770d.h
+++ b/drivers/gpu/drm/radeon/rv770d.h
@@ -211,6 +211,7 @@
 #define	SCRATCH_UMSK					0x8540
 #define	SCRATCH_ADDR					0x8544
 
+#define	SMX_SAR_CTL0					0xA008
 #define	SMX_DC_CTL0					0xA020
 #define		USE_HASH_FUNCTION				(1 << 0)
 #define		CACHE_DEPTH(x)					((x) << 1)
@@ -310,6 +311,8 @@
 #define	TCP_CNTL					0x9610
 #define	TCP_CHAN_STEER					0x9614
 
+#define	VC_ENHANCE					0x9714
+
 #define	VGT_CACHE_INVALIDATION				0x88C4
 #define		CACHE_INVALIDATION(x)				((x)<<0)
 #define			VC_ONLY						0
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index c7b61f1..0b02792 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -2365,12 +2365,12 @@
 	WREG32(0x15DC, 0);
 
 	/* empty context1-15 */
-	/* FIXME start with 1G, once using 2 level pt switch to full
+	/* FIXME start with 4G, once using 2 level pt switch to full
 	 * vm size space
 	 */
 	/* set vm size, must be a multiple of 4 */
 	WREG32(VM_CONTEXT1_PAGE_TABLE_START_ADDR, 0);
-	WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, (1 << 30) / RADEON_GPU_PAGE_SIZE);
+	WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn);
 	for (i = 1; i < 16; i++) {
 		if (i < 8)
 			WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2),
diff --git a/drivers/gpu/drm/radeon/si_reg.h b/drivers/gpu/drm/radeon/si_reg.h
index eda938a..501f9d43 100644
--- a/drivers/gpu/drm/radeon/si_reg.h
+++ b/drivers/gpu/drm/radeon/si_reg.h
@@ -30,4 +30,76 @@
 #define SI_DC_GPIO_HPD_EN                        0x65b8
 #define SI_DC_GPIO_HPD_Y                         0x65bc
 
+#define SI_GRPH_CONTROL                          0x6804
+#       define SI_GRPH_DEPTH(x)                  (((x) & 0x3) << 0)
+#       define SI_GRPH_DEPTH_8BPP                0
+#       define SI_GRPH_DEPTH_16BPP               1
+#       define SI_GRPH_DEPTH_32BPP               2
+#       define SI_GRPH_NUM_BANKS(x)              (((x) & 0x3) << 2)
+#       define SI_ADDR_SURF_2_BANK               0
+#       define SI_ADDR_SURF_4_BANK               1
+#       define SI_ADDR_SURF_8_BANK               2
+#       define SI_ADDR_SURF_16_BANK              3
+#       define SI_GRPH_Z(x)                      (((x) & 0x3) << 4)
+#       define SI_GRPH_BANK_WIDTH(x)             (((x) & 0x3) << 6)
+#       define SI_ADDR_SURF_BANK_WIDTH_1         0
+#       define SI_ADDR_SURF_BANK_WIDTH_2         1
+#       define SI_ADDR_SURF_BANK_WIDTH_4         2
+#       define SI_ADDR_SURF_BANK_WIDTH_8         3
+#       define SI_GRPH_FORMAT(x)                 (((x) & 0x7) << 8)
+/* 8 BPP */
+#       define SI_GRPH_FORMAT_INDEXED            0
+/* 16 BPP */
+#       define SI_GRPH_FORMAT_ARGB1555           0
+#       define SI_GRPH_FORMAT_ARGB565            1
+#       define SI_GRPH_FORMAT_ARGB4444           2
+#       define SI_GRPH_FORMAT_AI88               3
+#       define SI_GRPH_FORMAT_MONO16             4
+#       define SI_GRPH_FORMAT_BGRA5551           5
+/* 32 BPP */
+#       define SI_GRPH_FORMAT_ARGB8888           0
+#       define SI_GRPH_FORMAT_ARGB2101010        1
+#       define SI_GRPH_FORMAT_32BPP_DIG          2
+#       define SI_GRPH_FORMAT_8B_ARGB2101010     3
+#       define SI_GRPH_FORMAT_BGRA1010102        4
+#       define SI_GRPH_FORMAT_8B_BGRA1010102     5
+#       define SI_GRPH_FORMAT_RGB111110          6
+#       define SI_GRPH_FORMAT_BGR101111          7
+#       define SI_GRPH_BANK_HEIGHT(x)            (((x) & 0x3) << 11)
+#       define SI_ADDR_SURF_BANK_HEIGHT_1        0
+#       define SI_ADDR_SURF_BANK_HEIGHT_2        1
+#       define SI_ADDR_SURF_BANK_HEIGHT_4        2
+#       define SI_ADDR_SURF_BANK_HEIGHT_8        3
+#       define SI_GRPH_TILE_SPLIT(x)             (((x) & 0x7) << 13)
+#       define SI_ADDR_SURF_TILE_SPLIT_64B       0
+#       define SI_ADDR_SURF_TILE_SPLIT_128B      1
+#       define SI_ADDR_SURF_TILE_SPLIT_256B      2
+#       define SI_ADDR_SURF_TILE_SPLIT_512B      3
+#       define SI_ADDR_SURF_TILE_SPLIT_1KB       4
+#       define SI_ADDR_SURF_TILE_SPLIT_2KB       5
+#       define SI_ADDR_SURF_TILE_SPLIT_4KB       6
+#       define SI_GRPH_MACRO_TILE_ASPECT(x)      (((x) & 0x3) << 18)
+#       define SI_ADDR_SURF_MACRO_TILE_ASPECT_1  0
+#       define SI_ADDR_SURF_MACRO_TILE_ASPECT_2  1
+#       define SI_ADDR_SURF_MACRO_TILE_ASPECT_4  2
+#       define SI_ADDR_SURF_MACRO_TILE_ASPECT_8  3
+#       define SI_GRPH_ARRAY_MODE(x)             (((x) & 0x7) << 20)
+#       define SI_GRPH_ARRAY_LINEAR_GENERAL      0
+#       define SI_GRPH_ARRAY_LINEAR_ALIGNED      1
+#       define SI_GRPH_ARRAY_1D_TILED_THIN1      2
+#       define SI_GRPH_ARRAY_2D_TILED_THIN1      4
+#       define SI_GRPH_PIPE_CONFIG(x)		 (((x) & 0x1f) << 24)
+#       define SI_ADDR_SURF_P2			 0
+#       define SI_ADDR_SURF_P4_8x16		 4
+#       define SI_ADDR_SURF_P4_16x16		 5
+#       define SI_ADDR_SURF_P4_16x32		 6
+#       define SI_ADDR_SURF_P4_32x32		 7
+#       define SI_ADDR_SURF_P8_16x16_8x16	 8
+#       define SI_ADDR_SURF_P8_16x32_8x16	 9
+#       define SI_ADDR_SURF_P8_32x32_8x16	 10
+#       define SI_ADDR_SURF_P8_16x32_16x16	 11
+#       define SI_ADDR_SURF_P8_32x32_16x16	 12
+#       define SI_ADDR_SURF_P8_32x32_16x32	 13
+#       define SI_ADDR_SURF_P8_32x64_32x32	 14
+
 #endif
diff --git a/drivers/gpu/drm/sis/sis_drv.c b/drivers/gpu/drm/sis/sis_drv.c
index 30d98d1..dd14cd1 100644
--- a/drivers/gpu/drm/sis/sis_drv.c
+++ b/drivers/gpu/drm/sis/sis_drv.c
@@ -47,9 +47,9 @@
 	if (dev_priv == NULL)
 		return -ENOMEM;
 
+	idr_init(&dev_priv->object_idr);
 	dev->dev_private = (void *)dev_priv;
 	dev_priv->chipset = chipset;
-	idr_init(&dev->object_name_idr);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index b67cfca..36f4b28 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -1204,6 +1204,7 @@
 			(*destroy)(bo);
 		else
 			kfree(bo);
+		ttm_mem_global_free(mem_glob, acc_size);
 		return -EINVAL;
 	}
 	bo->destroy = destroy;
@@ -1307,22 +1308,14 @@
 			struct ttm_buffer_object **p_bo)
 {
 	struct ttm_buffer_object *bo;
-	struct ttm_mem_global *mem_glob = bdev->glob->mem_glob;
 	size_t acc_size;
 	int ret;
 
-	acc_size = ttm_bo_acc_size(bdev, size, sizeof(struct ttm_buffer_object));
-	ret = ttm_mem_global_alloc(mem_glob, acc_size, false, false);
-	if (unlikely(ret != 0))
-		return ret;
-
 	bo = kzalloc(sizeof(*bo), GFP_KERNEL);
-
-	if (unlikely(bo == NULL)) {
-		ttm_mem_global_free(mem_glob, acc_size);
+	if (unlikely(bo == NULL))
 		return -ENOMEM;
-	}
 
+	acc_size = ttm_bo_acc_size(bdev, size, sizeof(struct ttm_buffer_object));
 	ret = ttm_bo_init(bdev, bo, size, type, placement, page_alignment,
 				buffer_start, interruptible,
 			  persistent_swap_storage, acc_size, NULL, NULL);
diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c
index 4d02c46..6e52069 100644
--- a/drivers/gpu/drm/udl/udl_drv.c
+++ b/drivers/gpu/drm/udl/udl_drv.c
@@ -13,8 +13,21 @@
 
 static struct drm_driver driver;
 
+/*
+ * There are many DisplayLink-based graphics products, all with unique PIDs.
+ * So we match on DisplayLink's VID + Vendor-Defined Interface Class (0xff)
+ * We also require a match on SubClass (0x00) and Protocol (0x00),
+ * which is compatible with all known USB 2.0 era graphics chips and firmware,
+ * but allows DisplayLink to increment those for any future incompatible chips
+ */
 static struct usb_device_id id_table[] = {
-	{.idVendor = 0x17e9, .match_flags = USB_DEVICE_ID_MATCH_VENDOR,},
+	{.idVendor = 0x17e9, .bInterfaceClass = 0xff,
+	 .bInterfaceSubClass = 0x00,
+	 .bInterfaceProtocol = 0x00,
+	 .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
+			USB_DEVICE_ID_MATCH_INT_CLASS |
+			USB_DEVICE_ID_MATCH_INT_SUBCLASS |
+			USB_DEVICE_ID_MATCH_INT_PROTOCOL,},
 	{},
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/gpu/drm/udl/udl_main.c b/drivers/gpu/drm/udl/udl_main.c
index a8d5f09..4c2d836 100644
--- a/drivers/gpu/drm/udl/udl_main.c
+++ b/drivers/gpu/drm/udl/udl_main.c
@@ -61,7 +61,7 @@
 			u8 length;
 			u16 key;
 
-			key = *((u16 *) desc);
+			key = le16_to_cpu(*((u16 *) desc));
 			desc += sizeof(u16);
 			length = *desc;
 			desc++;
diff --git a/drivers/gpu/drm/via/via_map.c b/drivers/gpu/drm/via/via_map.c
index 1f18225..c126182 100644
--- a/drivers/gpu/drm/via/via_map.c
+++ b/drivers/gpu/drm/via/via_map.c
@@ -100,12 +100,11 @@
 	if (dev_priv == NULL)
 		return -ENOMEM;
 
+	idr_init(&dev_priv->object_idr);
 	dev->dev_private = (void *)dev_priv;
 
 	dev_priv->chipset = chipset;
 
-	idr_init(&dev->object_name_idr);
-
 	pci_set_master(dev->pdev);
 
 	ret = drm_vblank_init(dev, 1);
diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c
index 38f9534..5b3c7d1 100644
--- a/drivers/gpu/vga/vga_switcheroo.c
+++ b/drivers/gpu/vga/vga_switcheroo.c
@@ -190,6 +190,19 @@
 	return NULL;
 }
 
+int vga_switcheroo_get_client_state(struct pci_dev *pdev)
+{
+	struct vga_switcheroo_client *client;
+
+	client = find_client_from_pci(&vgasr_priv.clients, pdev);
+	if (!client)
+		return VGA_SWITCHEROO_NOT_FOUND;
+	if (!vgasr_priv.active)
+		return VGA_SWITCHEROO_INIT;
+	return client->pwr_state;
+}
+EXPORT_SYMBOL(vga_switcheroo_get_client_state);
+
 void vga_switcheroo_unregister_client(struct pci_dev *pdev)
 {
 	struct vga_switcheroo_client *client;
@@ -291,8 +304,6 @@
 		vga_switchon(new_client);
 
 	vga_set_default_device(new_client->pdev);
-	set_audio_state(new_client->id, VGA_SWITCHEROO_ON);
-
 	return 0;
 }
 
@@ -308,6 +319,8 @@
 
 	active->active = false;
 
+	set_audio_state(active->id, VGA_SWITCHEROO_OFF);
+
 	if (new_client->fb_info) {
 		struct fb_event event;
 		event.info = new_client->fb_info;
@@ -321,11 +334,11 @@
 	if (new_client->ops->reprobe)
 		new_client->ops->reprobe(new_client->pdev);
 
-	set_audio_state(active->id, VGA_SWITCHEROO_OFF);
-
 	if (active->pwr_state == VGA_SWITCHEROO_ON)
 		vga_switchoff(active);
 
+	set_audio_state(new_client->id, VGA_SWITCHEROO_ON);
+
 	new_client->active = true;
 	return 0;
 }
@@ -371,8 +384,9 @@
 	/* pwr off the device not in use */
 	if (strncmp(usercmd, "OFF", 3) == 0) {
 		list_for_each_entry(client, &vgasr_priv.clients, list) {
-			if (client->active)
+			if (client->active || client_is_audio(client))
 				continue;
+			set_audio_state(client->id, VGA_SWITCHEROO_OFF);
 			if (client->pwr_state == VGA_SWITCHEROO_ON)
 				vga_switchoff(client);
 		}
@@ -381,10 +395,11 @@
 	/* pwr on the device not in use */
 	if (strncmp(usercmd, "ON", 2) == 0) {
 		list_for_each_entry(client, &vgasr_priv.clients, list) {
-			if (client->active)
+			if (client->active || client_is_audio(client))
 				continue;
 			if (client->pwr_state == VGA_SWITCHEROO_OFF)
 				vga_switchon(client);
+			set_audio_state(client->id, VGA_SWITCHEROO_ON);
 		}
 		goto out;
 	}
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 034c80a1..bef04c1 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1,20 +1,11 @@
 #
 # HID driver configuration
 #
-menuconfig HID_SUPPORT
-	bool "HID Devices"
-	depends on INPUT
-	default y
-	---help---
-	  Say Y here to get to see options for various computer-human interface
-	  device drivers. This option alone does not add any kernel code.
-
-	  If you say N, all options in this submenu will be skipped and disabled.
-
-if HID_SUPPORT
+menu "HID support"
+     depends on INPUT
 
 config HID
-	tristate "Generic HID support"
+	tristate "HID bus support"
 	depends on INPUT
 	default y
 	---help---
@@ -23,14 +14,17 @@
 	  most commonly used to refer to the USB-HID specification, but other
 	  devices (such as, but not strictly limited to, Bluetooth) are
 	  designed using HID specification (this involves certain keyboards,
-	  mice, tablets, etc). This option compiles into kernel the generic
-	  HID layer code (parser, usages, etc.), which can then be used by
-	  transport-specific HID implementation (like USB or Bluetooth).
+	  mice, tablets, etc). This option adds the HID bus to the kernel,
+	  together with generic HID layer code. The HID devices are added and
+	  removed from the HID bus by the transport-layer drivers, such as
+	  usbhid (USB_HID) and hidp (BT_HIDP).
 
 	  For docs and specs, see http://www.usb.org/developers/hidpage/
 
 	  If unsure, say Y.
 
+if HID
+
 config HID_BATTERY_STRENGTH
 	bool "Battery level reporting for HID devices"
 	depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY
@@ -59,23 +53,22 @@
 
 	If unsure, say Y.
 
-source "drivers/hid/usbhid/Kconfig"
-
-menu "Special HID drivers"
-	depends on HID
-
 config HID_GENERIC
 	tristate "Generic HID driver"
 	depends on HID
-	default y
+	default HID
 	---help---
-	Support for generic HID devices.
+	Support for generic devices on the HID bus. This includes most
+	keyboards and mice, joysticks, tablets and digitizers.
 
 	To compile this driver as a module, choose M here: the module
 	will be called hid-generic.
 
 	If unsure, say Y.
 
+menu "Special HID drivers"
+	depends on HID
+
 config HID_A4TECH
 	tristate "A4 tech mice" if EXPERT
 	depends on USB_HID
@@ -662,4 +655,8 @@
 
 endmenu
 
-endif # HID_SUPPORT
+endif # HID
+
+source "drivers/hid/usbhid/Kconfig"
+
+endmenu
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 8e3a6b2..6ac0286 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1880,6 +1880,7 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)},
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)},
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_AXENTIA, USB_DEVICE_ID_AXENTIA_FM_RADIO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 9373f53..d1cdd2d 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -160,6 +160,9 @@
 #define USB_VENDOR_ID_AVERMEDIA		0x07ca
 #define USB_DEVICE_ID_AVER_FM_MR800	0xb800
 
+#define USB_VENDOR_ID_AXENTIA		0x12cf
+#define USB_DEVICE_ID_AXENTIA_FM_RADIO	0x7111
+
 #define USB_VENDOR_ID_BAANTO		0x2453
 #define USB_DEVICE_ID_BAANTO_MT_190W2	0x0100
 
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 5e8a7ed..0f9c146 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -436,27 +436,37 @@
 
 static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
 {
-	struct dj_report dj_report;
+	struct dj_report *dj_report;
+	int retval;
 
-	memset(&dj_report, 0, sizeof(dj_report));
-	dj_report.report_id = REPORT_ID_DJ_SHORT;
-	dj_report.device_index = 0xFF;
-	dj_report.report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
-	return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+	dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+	if (!dj_report)
+		return -ENOMEM;
+	dj_report->report_id = REPORT_ID_DJ_SHORT;
+	dj_report->device_index = 0xFF;
+	dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
+	retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+	kfree(dj_report);
+	return retval;
 }
 
 static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
 					  unsigned timeout)
 {
-	struct dj_report dj_report;
+	struct dj_report *dj_report;
+	int retval;
 
-	memset(&dj_report, 0, sizeof(dj_report));
-	dj_report.report_id = REPORT_ID_DJ_SHORT;
-	dj_report.device_index = 0xFF;
-	dj_report.report_type = REPORT_TYPE_CMD_SWITCH;
-	dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
-	dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
-	return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+	dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+	if (!dj_report)
+		return -ENOMEM;
+	dj_report->report_id = REPORT_ID_DJ_SHORT;
+	dj_report->device_index = 0xFF;
+	dj_report->report_type = REPORT_TYPE_CMD_SWITCH;
+	dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
+	dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
+	retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+	kfree(dj_report);
+	return retval;
 }
 
 
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index 7cf3ffe..40ac665 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -426,8 +426,10 @@
 		__set_bit(EV_ABS, input->evbit);
 
 		input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0);
-		input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0);
-		input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0);
+		input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255 << 2,
+				     4, 0);
+		input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255 << 2,
+				     4, 0);
 		input_set_abs_params(input, ABS_MT_ORIENTATION, -31, 32, 1, 0);
 
 		/* Note: Touch Y position from the device is inverted relative
diff --git a/drivers/hid/usbhid/Kconfig b/drivers/hid/usbhid/Kconfig
index 0f20fd1..0108c59 100644
--- a/drivers/hid/usbhid/Kconfig
+++ b/drivers/hid/usbhid/Kconfig
@@ -1,13 +1,13 @@
-comment "USB Input Devices"
+menu "USB HID support"
 	depends on USB
 
 config USB_HID
-	tristate "USB Human Interface Device (full HID) support"
+	tristate "USB HID transport layer"
 	default y
 	depends on USB && INPUT
 	select HID
 	---help---
-	  Say Y here if you want full HID support to connect USB keyboards,
+	  Say Y here if you want to connect USB keyboards,
 	  mice, joysticks, graphic tablets, or any other HID based devices
 	  to your computer via USB, as well as Uninterruptible Power Supply
 	  (UPS) and monitor control devices.
@@ -81,4 +81,4 @@
 
 endmenu
 
-
+endmenu
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index f082e48..2cde9ec 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -8,7 +8,7 @@
  *
  * Based on hdaps.c driver:
  * Copyright (C) 2005 Robert Love <rml@novell.com>
- * Copyright (C) 2005 Jesper Juhl <jesper.juhl@gmail.com>
+ * Copyright (C) 2005 Jesper Juhl <jj@chaosbits.net>
  *
  * Fan control based on smcFanControl:
  * Copyright (C) 2006 Hendrik Holtmann <holtmann@mac.com>
@@ -215,7 +215,7 @@
 	int i;
 
 	if (send_command(cmd) || send_argument(key)) {
-		pr_warn("%s: read arg fail\n", key);
+		pr_warn("%.4s: read arg fail\n", key);
 		return -EIO;
 	}
 
@@ -223,7 +223,7 @@
 
 	for (i = 0; i < len; i++) {
 		if (__wait_status(0x05)) {
-			pr_warn("%s: read data fail\n", key);
+			pr_warn("%.4s: read data fail\n", key);
 			return -EIO;
 		}
 		buffer[i] = inb(APPLESMC_DATA_PORT);
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index b9d5123..637c51c 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -191,6 +191,24 @@
 	return tdata->valid ? sprintf(buf, "%d\n", tdata->temp) : -EAGAIN;
 }
 
+struct tjmax {
+	char const *id;
+	int tjmax;
+};
+
+static struct tjmax __cpuinitconst tjmax_table[] = {
+	{ "CPU D410", 100000 },
+	{ "CPU D425", 100000 },
+	{ "CPU D510", 100000 },
+	{ "CPU D525", 100000 },
+	{ "CPU N450", 100000 },
+	{ "CPU N455", 100000 },
+	{ "CPU N470", 100000 },
+	{ "CPU N475", 100000 },
+	{ "CPU  230", 100000 },
+	{ "CPU  330", 125000 },
+};
+
 static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id,
 				  struct device *dev)
 {
@@ -202,6 +220,13 @@
 	int err;
 	u32 eax, edx;
 	struct pci_dev *host_bridge;
+	int i;
+
+	/* explicit tjmax table entries override heuristics */
+	for (i = 0; i < ARRAY_SIZE(tjmax_table); i++) {
+		if (strstr(c->x86_model_id, tjmax_table[i].id))
+			return tjmax_table[i].tjmax;
+	}
 
 	/* Early chips have no MSR for TjMax */
 
@@ -210,7 +235,8 @@
 
 	/* Atom CPUs */
 
-	if (c->x86_model == 0x1c) {
+	if (c->x86_model == 0x1c || c->x86_model == 0x26
+	    || c->x86_model == 0x27) {
 		usemsr_ee = 0;
 
 		host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
@@ -223,6 +249,9 @@
 			tjmax = 90000;
 
 		pci_dev_put(host_bridge);
+	} else if (c->x86_model == 0x36) {
+		usemsr_ee = 0;
+		tjmax = 100000;
 	}
 
 	if (c->x86_model > 0xe && usemsr_ee) {
@@ -664,7 +693,7 @@
 	 * sensors. We check this bit only, all the early CPUs
 	 * without thermal sensors will be filtered out.
 	 */
-	if (!cpu_has(c, X86_FEATURE_DTS))
+	if (!cpu_has(c, X86_FEATURE_DTHERM))
 		return;
 
 	if (!pdev) {
@@ -765,14 +794,14 @@
 };
 
 static const struct x86_cpu_id coretemp_ids[] = {
-	{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTS },
+	{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTHERM },
 	{}
 };
 MODULE_DEVICE_TABLE(x86cpu, coretemp_ids);
 
 static int __init coretemp_init(void)
 {
-	int i, err = -ENODEV;
+	int i, err;
 
 	/*
 	 * CPUID.06H.EAX[0] indicates whether the CPU has thermal
diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
index 9691f66..e7d234b5 100644
--- a/drivers/hwmon/emc2103.c
+++ b/drivers/hwmon/emc2103.c
@@ -451,11 +451,15 @@
 		data->fan_rpm_control = true;
 		break;
 	default:
-		mutex_unlock(&data->update_lock);
-		return -EINVAL;
+		count = -EINVAL;
+		goto err;
 	}
 
-	read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+	result = read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+	if (result) {
+		count = result;
+		goto err;
+	}
 
 	if (data->fan_rpm_control)
 		conf_reg |= 0x80;
@@ -463,7 +467,7 @@
 		conf_reg &= ~0x80;
 
 	i2c_smbus_write_byte_data(client, REG_FAN_CONF1, conf_reg);
-
+err:
 	mutex_unlock(&data->update_lock);
 	return count;
 }
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index a9bfd67..e72ba5d 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -590,6 +590,6 @@
 
 module_i2c_driver(jc42_driver);
 
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
 MODULE_DESCRIPTION("JC42 driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/lineage-pem.c b/drivers/hwmon/lineage-pem.c
index d264937..bd75d24 100644
--- a/drivers/hwmon/lineage-pem.c
+++ b/drivers/hwmon/lineage-pem.c
@@ -567,6 +567,6 @@
 
 module_i2c_driver(pem_driver);
 
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
 MODULE_DESCRIPTION("Lineage CPL PEM hardware monitoring driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/ltc4261.c b/drivers/hwmon/ltc4261.c
index 069b7d34..77476a5 100644
--- a/drivers/hwmon/ltc4261.c
+++ b/drivers/hwmon/ltc4261.c
@@ -292,6 +292,6 @@
 
 module_i2c_driver(ltc4261_driver);
 
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
 MODULE_DESCRIPTION("LTC4261 driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/max16065.c b/drivers/hwmon/max16065.c
index 822261b..019427d 100644
--- a/drivers/hwmon/max16065.c
+++ b/drivers/hwmon/max16065.c
@@ -692,6 +692,6 @@
 
 module_i2c_driver(max16065_driver);
 
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
 MODULE_DESCRIPTION("MAX16065 driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 8716066..bcb507b 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -236,7 +236,7 @@
  */
 static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	unsigned long cycle_time;
+	unsigned long cycle_time = 0;
 	int use_dma_info = 0;
 	const u8 xfer_mode = drive->dma_mode;
 
@@ -271,9 +271,9 @@
 
 	ide_set_drivedata(drive, (void *)cycle_time);
 
-	printk("%s: %s selected (peak %dMB/s)\n", drive->name,
-		ide_xfer_verbose(xfer_mode),
-		2000 / (unsigned long)ide_get_drivedata(drive));
+	printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n",
+	       drive->name, ide_xfer_verbose(xfer_mode),
+	       2000 / (cycle_time ? cycle_time : (unsigned long) -1));
 }
 
 static const struct ide_port_ops icside_v6_port_ops = {
@@ -375,8 +375,6 @@
 	.dma_test_irq		= icside_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
 };
-#else
-#define icside_v6_dma_ops NULL
 #endif
 
 static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
@@ -456,7 +454,6 @@
 static const struct ide_port_info icside_v6_port_info __initdata = {
 	.init_dma		= icside_dma_off_init,
 	.port_ops		= &icside_v6_no_dma_port_ops,
-	.dma_ops		= &icside_v6_dma_ops,
 	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
 	.mwdma_mask		= ATA_MWDMA2,
 	.swdma_mask		= ATA_SWDMA2,
@@ -518,11 +515,13 @@
 
 	ecard_set_drvdata(ec, state);
 
+#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
 	if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
 		d.init_dma = icside_dma_init;
 		d.port_ops = &icside_v6_port_ops;
-	} else
-		d.dma_ops = NULL;
+		d.dma_ops  = &icside_v6_dma_ops;
+	}
+#endif
 
 	ret = ide_host_register(host, &d, hws);
 	if (ret)
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 28e344e..f1e922e 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -167,7 +167,8 @@
 {
 	int *is_kme = priv_data;
 
-	if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) {
+	if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH)
+	    != IO_DATA_PATH_WIDTH_8) {
 		pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 		pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	}
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 56eecef..2ec93da 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -8,8 +8,7 @@
 	help
 	  The industrial I/O subsystem provides a unified framework for
 	  drivers for many different types of embedded sensors using a
-	  number of different physical interfaces (i2c, spi, etc). See
-	  Documentation/iio for more information.
+	  number of different physical interfaces (i2c, spi, etc).
 
 if IIO
 
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 1ddd886..4f947e4 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -661,7 +661,6 @@
 	 * New channel registration method - relies on the fact a group does
 	 * not need to be initialized if it is name is NULL.
 	 */
-	INIT_LIST_HEAD(&indio_dev->channel_attr_list);
 	if (indio_dev->channels)
 		for (i = 0; i < indio_dev->num_channels; i++) {
 			ret = iio_device_add_channel_sysfs(indio_dev,
@@ -725,12 +724,16 @@
 static void iio_dev_release(struct device *device)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(device);
-	cdev_del(&indio_dev->chrdev);
+	if (indio_dev->chrdev.dev)
+		cdev_del(&indio_dev->chrdev);
 	if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
 		iio_device_unregister_trigger_consumer(indio_dev);
 	iio_device_unregister_eventset(indio_dev);
 	iio_device_unregister_sysfs(indio_dev);
 	iio_device_unregister_debugfs(indio_dev);
+
+	ida_simple_remove(&iio_ida, indio_dev->id);
+	kfree(indio_dev);
 }
 
 static struct device_type iio_dev_type = {
@@ -761,6 +764,7 @@
 		dev_set_drvdata(&dev->dev, (void *)dev);
 		mutex_init(&dev->mlock);
 		mutex_init(&dev->info_exist_lock);
+		INIT_LIST_HEAD(&dev->channel_attr_list);
 
 		dev->id = ida_simple_get(&iio_ida, 0, 0, GFP_KERNEL);
 		if (dev->id < 0) {
@@ -778,10 +782,8 @@
 
 void iio_device_free(struct iio_dev *dev)
 {
-	if (dev) {
-		ida_simple_remove(&iio_ida, dev->id);
-		kfree(dev);
-	}
+	if (dev)
+		put_device(&dev->dev);
 }
 EXPORT_SYMBOL(iio_device_free);
 
@@ -902,7 +904,7 @@
 	mutex_lock(&indio_dev->info_exist_lock);
 	indio_dev->info = NULL;
 	mutex_unlock(&indio_dev->info_exist_lock);
-	device_unregister(&indio_dev->dev);
+	device_del(&indio_dev->dev);
 }
 EXPORT_SYMBOL(iio_device_unregister);
 subsys_initcall(iio_init);
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 55d5642..2e826f9 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -1184,7 +1184,7 @@
 
 static int cma_check_req_qp_type(struct rdma_cm_id *id, struct ib_cm_event *ib_event)
 {
-	return (((ib_event->event == IB_CM_REQ_RECEIVED) ||
+	return (((ib_event->event == IB_CM_REQ_RECEIVED) &&
 		 (ib_event->param.req_rcvd.qp_type == id->qp_type)) ||
 		((ib_event->event == IB_CM_SIDR_REQ_RECEIVED) &&
 		 (id->qp_type == IB_QPT_UD)) ||
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma.h b/drivers/infiniband/hw/ocrdma/ocrdma.h
index 037f5ce..48970af 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma.h
+++ b/drivers/infiniband/hw/ocrdma/ocrdma.h
@@ -61,6 +61,7 @@
 	u32 max_inline_data;
 	int max_send_sge;
 	int max_recv_sge;
+	int max_srq_sge;
 	int max_mr;
 	u64 max_mr_size;
 	u32 max_num_mr_pbl;
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
index 9343a15..71942af 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c
@@ -990,8 +990,6 @@
 			      struct ocrdma_dev_attr *attr,
 			      struct ocrdma_mbx_query_config *rsp)
 {
-	int max_q_mem;
-
 	attr->max_pd =
 	    (rsp->max_pd_ca_ack_delay & OCRDMA_MBX_QUERY_CFG_MAX_PD_MASK) >>
 	    OCRDMA_MBX_QUERY_CFG_MAX_PD_SHIFT;
@@ -1004,6 +1002,9 @@
 	attr->max_recv_sge = (rsp->max_write_send_sge &
 			      OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK) >>
 	    OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT;
+	attr->max_srq_sge = (rsp->max_srq_rqe_sge &
+			      OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_MASK) >>
+	    OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_OFFSET;
 	attr->max_ord_per_qp = (rsp->max_ird_ord_per_qp &
 				OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK) >>
 	    OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT;
@@ -1037,18 +1038,15 @@
 	attr->max_inline_data =
 	    attr->wqe_size - (sizeof(struct ocrdma_hdr_wqe) +
 			      sizeof(struct ocrdma_sge));
-	max_q_mem = OCRDMA_Q_PAGE_BASE_SIZE << (OCRDMA_MAX_Q_PAGE_SIZE_CNT - 1);
-	/* hw can queue one less then the configured size,
-	 * so publish less by one to stack.
-	 */
 	if (dev->nic_info.dev_family == OCRDMA_GEN2_FAMILY) {
-		dev->attr.max_wqe = max_q_mem / dev->attr.wqe_size;
 		attr->ird = 1;
 		attr->ird_page_size = OCRDMA_MIN_Q_PAGE_SIZE;
 		attr->num_ird_pages = MAX_OCRDMA_IRD_PAGES;
-	} else
-		dev->attr.max_wqe = (max_q_mem / dev->attr.wqe_size) - 1;
-	dev->attr.max_rqe = (max_q_mem / dev->attr.rqe_size) - 1;
+	}
+	dev->attr.max_wqe = rsp->max_wqes_rqes_per_q >>
+		 OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET;
+	dev->attr.max_rqe = rsp->max_wqes_rqes_per_q &
+		OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK;
 }
 
 static int ocrdma_check_fw_config(struct ocrdma_dev *dev,
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_main.c b/drivers/infiniband/hw/ocrdma/ocrdma_main.c
index 04fef3d..b050e62 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_main.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_main.c
@@ -97,13 +97,11 @@
 	sgid->raw[15] = mac_addr[5];
 }
 
-static void ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
+static bool ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
 			    bool is_vlan, u16 vlan_id)
 {
 	int i;
-	bool found = false;
 	union ib_gid new_sgid;
-	int free_idx = OCRDMA_MAX_SGID;
 	unsigned long flags;
 
 	memset(&ocrdma_zero_sgid, 0, sizeof(union ib_gid));
@@ -115,23 +113,19 @@
 		if (!memcmp(&dev->sgid_tbl[i], &ocrdma_zero_sgid,
 			    sizeof(union ib_gid))) {
 			/* found free entry */
-			if (!found) {
-				free_idx = i;
-				found = true;
-				break;
-			}
+			memcpy(&dev->sgid_tbl[i], &new_sgid,
+			       sizeof(union ib_gid));
+			spin_unlock_irqrestore(&dev->sgid_lock, flags);
+			return true;
 		} else if (!memcmp(&dev->sgid_tbl[i], &new_sgid,
 				   sizeof(union ib_gid))) {
 			/* entry already present, no addition is required. */
 			spin_unlock_irqrestore(&dev->sgid_lock, flags);
-			return;
+			return false;
 		}
 	}
-	/* if entry doesn't exist and if table has some space, add entry */
-	if (found)
-		memcpy(&dev->sgid_tbl[free_idx], &new_sgid,
-		       sizeof(union ib_gid));
 	spin_unlock_irqrestore(&dev->sgid_lock, flags);
+	return false;
 }
 
 static bool ocrdma_del_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
@@ -167,7 +161,8 @@
 	ocrdma_get_guid(dev, &sgid->raw[8]);
 }
 
-static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev)
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev)
 {
 	struct net_device *netdev, *tmp;
 	u16 vlan_id;
@@ -175,8 +170,6 @@
 
 	netdev = dev->nic_info.netdev;
 
-	ocrdma_add_default_sgid(dev);
-
 	rcu_read_lock();
 	for_each_netdev_rcu(&init_net, tmp) {
 		if (netdev == tmp || vlan_dev_real_dev(tmp) == netdev) {
@@ -194,10 +187,23 @@
 		}
 	}
 	rcu_read_unlock();
+}
+#else
+static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev)
+{
+
+}
+#endif /* VLAN */
+
+static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev)
+{
+	ocrdma_add_default_sgid(dev);
+	ocrdma_add_vlan_sgids(dev);
 	return 0;
 }
 
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) || \
+defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
 
 static int ocrdma_inet6addr_event(struct notifier_block *notifier,
 				  unsigned long event, void *ptr)
@@ -208,6 +214,7 @@
 	struct ib_event gid_event;
 	struct ocrdma_dev *dev;
 	bool found = false;
+	bool updated = false;
 	bool is_vlan = false;
 	u16 vid = 0;
 
@@ -233,23 +240,21 @@
 	mutex_lock(&dev->dev_lock);
 	switch (event) {
 	case NETDEV_UP:
-		ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid);
+		updated = ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid);
 		break;
 	case NETDEV_DOWN:
-		found = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid);
-		if (found) {
-			/* found the matching entry, notify
-			 * the consumers about it
-			 */
-			gid_event.device = &dev->ibdev;
-			gid_event.element.port_num = 1;
-			gid_event.event = IB_EVENT_GID_CHANGE;
-			ib_dispatch_event(&gid_event);
-		}
+		updated = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid);
 		break;
 	default:
 		break;
 	}
+	if (updated) {
+		/* GID table updated, notify the consumers about it */
+		gid_event.device = &dev->ibdev;
+		gid_event.element.port_num = 1;
+		gid_event.event = IB_EVENT_GID_CHANGE;
+		ib_dispatch_event(&gid_event);
+	}
 	mutex_unlock(&dev->dev_lock);
 	return NOTIFY_OK;
 }
@@ -258,7 +263,7 @@
 	.notifier_call = ocrdma_inet6addr_event
 };
 
-#endif /* IPV6 */
+#endif /* IPV6 and VLAN */
 
 static enum rdma_link_layer ocrdma_link_layer(struct ib_device *device,
 					      u8 port_num)
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h
index 7fd80cc..c75cbdf 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h
@@ -418,6 +418,9 @@
 
 	OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT		= 0,
 	OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK		= 0xFFFF,
+	OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT	= 16,
+	OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_MASK		= 0xFFFF <<
+				OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT,
 
 	OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT	= 0,
 	OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK	= 0xFFFF,
@@ -458,7 +461,7 @@
 				OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET,
 	OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET	= 0,
 	OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK	= 0xFFFF <<
-				OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET,
+				OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET,
 
 	OCRDMA_MBX_QUERY_CFG_MAX_CQ_OFFSET		= 16,
 	OCRDMA_MBX_QUERY_CFG_MAX_CQ_MASK		= 0xFFFF <<
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
index d16d172..2e2e7ae 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
@@ -53,7 +53,7 @@
 
 	dev = get_ocrdma_dev(ibdev);
 	memset(sgid, 0, sizeof(*sgid));
-	if (index > OCRDMA_MAX_SGID)
+	if (index >= OCRDMA_MAX_SGID)
 		return -EINVAL;
 
 	memcpy(sgid, &dev->sgid_tbl[index], sizeof(*sgid));
@@ -83,8 +83,8 @@
 					IB_DEVICE_SHUTDOWN_PORT |
 					IB_DEVICE_SYS_IMAGE_GUID |
 					IB_DEVICE_LOCAL_DMA_LKEY;
-	attr->max_sge = dev->attr.max_send_sge;
-	attr->max_sge_rd = dev->attr.max_send_sge;
+	attr->max_sge = min(dev->attr.max_send_sge, dev->attr.max_srq_sge);
+	attr->max_sge_rd = 0;
 	attr->max_cq = dev->attr.max_cq;
 	attr->max_cqe = dev->attr.max_cqe;
 	attr->max_mr = dev->attr.max_mr;
@@ -97,7 +97,7 @@
 	    min(dev->attr.max_ord_per_qp, dev->attr.max_ird_per_qp);
 	attr->max_qp_init_rd_atom = dev->attr.max_ord_per_qp;
 	attr->max_srq = (dev->attr.max_qp - 1);
-	attr->max_srq_sge = attr->max_sge;
+	attr->max_srq_sge = attr->max_srq_sge;
 	attr->max_srq_wr = dev->attr.max_rqe;
 	attr->local_ca_ack_delay = dev->attr.local_ca_ack_delay;
 	attr->max_fast_reg_page_list_len = 0;
@@ -2301,8 +2301,10 @@
 			*stop = true;
 			expand = false;
 		}
-	} else
+	} else {
+		*polled = true;
 		expand = ocrdma_update_err_rcqe(ibwc, cqe, qp, status);
+	}
 	return expand;
 }
 
diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c
index 57d19d4..c96653b 100644
--- a/drivers/input/joystick/as5011.c
+++ b/drivers/input/joystick/as5011.c
@@ -282,7 +282,8 @@
 
 	error = request_threaded_irq(as5011->button_irq,
 				     NULL, as5011_button_interrupt,
-				     IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				     IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 				     "as5011_button", as5011);
 	if (error < 0) {
 		dev_err(&client->dev,
@@ -296,7 +297,7 @@
 
 	error = request_threaded_irq(as5011->axis_irq, NULL,
 				     as5011_axis_interrupt,
-				     plat_data->axis_irqflags,
+				     plat_data->axis_irqflags | IRQF_ONESHOT,
 				     "as5011_joystick", as5011);
 	if (error) {
 		dev_err(&client->dev,
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
index 64a0ca4..0d77f6c 100644
--- a/drivers/input/keyboard/mcs_touchkey.c
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -178,7 +178,8 @@
 	}
 
 	error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt,
-			IRQF_TRIGGER_FALLING, client->dev.driver->name, data);
+				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				     client->dev.driver->name, data);
 	if (error) {
 		dev_err(&client->dev, "Failed to register interrupt\n");
 		goto err_free_mem;
diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
index caa218a..7613f1c 100644
--- a/drivers/input/keyboard/mpr121_touchkey.c
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -248,7 +248,7 @@
 
 	error = request_threaded_irq(client->irq, NULL,
 				     mpr_touchkey_interrupt,
-				     IRQF_TRIGGER_FALLING,
+				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 				     client->dev.driver->name, mpr121);
 	if (error) {
 		dev_err(&client->dev, "Failed to register interrupt\n");
diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c
index 0b7b2f8..ca68f29 100644
--- a/drivers/input/keyboard/qt1070.c
+++ b/drivers/input/keyboard/qt1070.c
@@ -201,7 +201,8 @@
 	msleep(QT1070_RESET_TIME);
 
 	err = request_threaded_irq(client->irq, NULL, qt1070_interrupt,
-		IRQF_TRIGGER_NONE, client->dev.driver->name, data);
+				   IRQF_TRIGGER_NONE | IRQF_ONESHOT,
+				   client->dev.driver->name, data);
 	if (err) {
 		dev_err(&client->dev, "fail to request irq\n");
 		goto err_free_mem;
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 3afea3f..c355cdd 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -278,7 +278,8 @@
 
 		error = request_threaded_irq(chip->irqnum, NULL,
 					     tca6416_keys_isr,
-					     IRQF_TRIGGER_FALLING,
+					     IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
 					     "tca6416-keypad", chip);
 		if (error) {
 			dev_dbg(&client->dev,
diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
index 5f87b28..893869b 100644
--- a/drivers/input/keyboard/tca8418_keypad.c
+++ b/drivers/input/keyboard/tca8418_keypad.c
@@ -360,7 +360,7 @@
 		client->irq = gpio_to_irq(client->irq);
 
 	error = request_threaded_irq(client->irq, NULL, tca8418_irq_handler,
-				     IRQF_TRIGGER_FALLING,
+				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 				     client->name, keypad_data);
 	if (error) {
 		dev_dbg(&client->dev,
diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c
index a4a445f..4c34f21 100644
--- a/drivers/input/keyboard/tnetv107x-keypad.c
+++ b/drivers/input/keyboard/tnetv107x-keypad.c
@@ -227,15 +227,15 @@
 		goto error_clk;
 	}
 
-	error = request_threaded_irq(kp->irq_press, NULL, keypad_irq, 0,
-				     dev_name(dev), kp);
+	error = request_threaded_irq(kp->irq_press, NULL, keypad_irq,
+				     IRQF_ONESHOT, dev_name(dev), kp);
 	if (error < 0) {
 		dev_err(kp->dev, "Could not allocate keypad press key irq\n");
 		goto error_irq_press;
 	}
 
-	error = request_threaded_irq(kp->irq_release, NULL, keypad_irq, 0,
-				     dev_name(dev), kp);
+	error = request_threaded_irq(kp->irq_release, NULL, keypad_irq,
+				     IRQF_ONESHOT, dev_name(dev), kp);
 	if (error < 0) {
 		dev_err(kp->dev, "Could not allocate keypad release key irq\n");
 		goto error_irq_release;
diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c
index 0ac75bb..2e5d5e1 100644
--- a/drivers/input/misc/ad714x.c
+++ b/drivers/input/misc/ad714x.c
@@ -972,6 +972,7 @@
 	struct ad714x_platform_data *plat_data = dev->platform_data;
 	struct ad714x_chip *ad714x;
 	void *drv_mem;
+	unsigned long irqflags;
 
 	struct ad714x_button_drv *bt_drv;
 	struct ad714x_slider_drv *sd_drv;
@@ -1162,10 +1163,11 @@
 		alloc_idx++;
 	}
 
+	irqflags = plat_data->irqflags ?: IRQF_TRIGGER_FALLING;
+	irqflags |= IRQF_ONESHOT;
+
 	error = request_threaded_irq(ad714x->irq, NULL, ad714x_interrupt_thread,
-				plat_data->irqflags ?
-					plat_data->irqflags : IRQF_TRIGGER_FALLING,
-				"ad714x_captouch", ad714x);
+				     irqflags, "ad714x_captouch", ad714x);
 	if (error) {
 		dev_err(dev, "can't allocate irq %d\n", ad714x->irq);
 		goto err_unreg_dev;
diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c
index 35083c6..c1313d8 100644
--- a/drivers/input/misc/dm355evm_keys.c
+++ b/drivers/input/misc/dm355evm_keys.c
@@ -213,7 +213,8 @@
 	/* REVISIT:  flush the event queue? */
 
 	status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq,
-			IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys);
+				      IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				      dev_name(&pdev->dev), keys);
 	if (status < 0)
 		goto fail2;
 
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index cad5602..8b31473 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -216,7 +216,7 @@
 
 		rep_data[0] = 12;
 		result = wacom_get_report(intf, WAC_HID_FEATURE_REPORT,
-					  rep_data[0], &rep_data, 2,
+					  rep_data[0], rep_data, 2,
 					  WAC_MSG_RETRIES);
 
 		if (result >= 0 && rep_data[1] > 2)
@@ -401,7 +401,9 @@
 				break;
 
 			case HID_USAGE_CONTACTMAX:
-				wacom_retrieve_report_data(intf, features);
+				/* leave touch_max as is if predefined */
+				if (!features->touch_max)
+					wacom_retrieve_report_data(intf, features);
 				i++;
 				break;
 			}
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index e2482b4..bd4eb42 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -597,7 +597,7 @@
 			AD7879_TMR(ts->pen_down_acc_interval);
 
 	err = request_threaded_irq(ts->irq, NULL, ad7879_irq,
-				   IRQF_TRIGGER_FALLING,
+				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 				   dev_name(dev), ts);
 	if (err) {
 		dev_err(dev, "irq %d busy?\n", ts->irq);
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 42e6450..25fd056 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1149,7 +1149,8 @@
 		goto err_free_object;
 
 	error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
-			pdata->irqflags, client->dev.driver->name, data);
+				     pdata->irqflags | IRQF_ONESHOT,
+				     client->dev.driver->name, data);
 	if (error) {
 		dev_err(&client->dev, "Failed to register interrupt\n");
 		goto err_free_object;
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index f2d03c0..5c487d2 100644
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -509,7 +509,8 @@
 	input_set_drvdata(in_dev, bu21013_data);
 
 	error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq,
-				     IRQF_TRIGGER_FALLING | IRQF_SHARED,
+				     IRQF_TRIGGER_FALLING | IRQF_SHARED |
+					IRQF_ONESHOT,
 				     DRIVER_TP, bu21013_data);
 	if (error) {
 		dev_err(&client->dev, "request irq %d failed\n", pdata->irq);
diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c
index 237753a..464f1bf 100644
--- a/drivers/input/touchscreen/cy8ctmg110_ts.c
+++ b/drivers/input/touchscreen/cy8ctmg110_ts.c
@@ -251,7 +251,8 @@
 	}
 
 	err = request_threaded_irq(client->irq, NULL, cy8ctmg110_irq_thread,
-				   IRQF_TRIGGER_RISING, "touch_reset_key", ts);
+				   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				   "touch_reset_key", ts);
 	if (err < 0) {
 		dev_err(&client->dev,
 			"irq %d busy? error %d\n", client->irq, err);
diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
index 3cd7a83..cf29937 100644
--- a/drivers/input/touchscreen/intel-mid-touch.c
+++ b/drivers/input/touchscreen/intel-mid-touch.c
@@ -620,7 +620,7 @@
 			     MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0);
 
 	err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq,
-				   0, "mrstouch", tsdev);
+				   IRQF_ONESHOT, "mrstouch", tsdev);
 	if (err) {
 		dev_err(tsdev->dev, "unable to allocate irq\n");
 		goto err_free_mem;
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 72f6ba3..953b4c1 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -165,7 +165,7 @@
 	input_set_drvdata(input, tsdata);
 
 	error = request_threaded_irq(client->irq, NULL, pixcir_ts_isr,
-				     IRQF_TRIGGER_FALLING,
+				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 				     client->name, tsdata);
 	if (error) {
 		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c
index 7e74880..368d2c6c 100644
--- a/drivers/input/touchscreen/tnetv107x-ts.c
+++ b/drivers/input/touchscreen/tnetv107x-ts.c
@@ -297,7 +297,7 @@
 		goto error_clk;
 	}
 
-	error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, 0,
+	error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, IRQF_ONESHOT,
 				     dev_name(dev), ts);
 	if (error < 0) {
 		dev_err(ts->dev, "Could not allocate ts irq\n");
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
index b6adeae..5ce3fa8 100644
--- a/drivers/input/touchscreen/tsc2005.c
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -650,7 +650,8 @@
 	tsc2005_stop_scan(ts);
 
 	error = request_threaded_irq(spi->irq, NULL, tsc2005_irq_thread,
-				     IRQF_TRIGGER_RISING, "tsc2005", ts);
+				     IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				     "tsc2005", ts);
 	if (error) {
 		dev_err(&spi->dev, "Failed to request irq, err: %d\n", error);
 		goto err_free_mem;
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 04cb8c8..12b2b55 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -379,7 +379,7 @@
 
 config LEDS_ASIC3
 	bool "LED support for the HTC ASIC3"
-	depends on LEDS_CLASS
+	depends on LEDS_CLASS=y
 	depends on MFD_ASIC3
 	default y
 	help
@@ -390,7 +390,7 @@
 
 config LEDS_RENESAS_TPU
 	bool "LED support for Renesas TPU"
-	depends on LEDS_CLASS && HAVE_CLK && GENERIC_GPIO
+	depends on LEDS_CLASS=y && HAVE_CLK && GENERIC_GPIO
 	help
 	  This option enables build of the LED TPU platform driver,
 	  suitable to drive any TPU channel on newer Renesas SoCs.
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 8ee92c8..e663e6f 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -29,7 +29,7 @@
 		led_cdev->brightness = led_cdev->brightness_get(led_cdev);
 }
 
-static ssize_t led_brightness_show(struct device *dev, 
+static ssize_t led_brightness_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
index d686004..d65353d 100644
--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -44,13 +44,6 @@
 	if (!led_cdev->blink_brightness)
 		led_cdev->blink_brightness = led_cdev->max_brightness;
 
-	if (led_get_trigger_data(led_cdev) &&
-	    delay_on == led_cdev->blink_delay_on &&
-	    delay_off == led_cdev->blink_delay_off)
-		return;
-
-	led_stop_software_blink(led_cdev);
-
 	led_cdev->blink_delay_on = delay_on;
 	led_cdev->blink_delay_off = delay_off;
 
diff --git a/drivers/leds/ledtrig-heartbeat.c b/drivers/leds/ledtrig-heartbeat.c
index 41dc76d..a019fbb 100644
--- a/drivers/leds/ledtrig-heartbeat.c
+++ b/drivers/leds/ledtrig-heartbeat.c
@@ -21,6 +21,8 @@
 #include <linux/reboot.h>
 #include "leds.h"
 
+static int panic_heartbeats;
+
 struct heartbeat_trig_data {
 	unsigned int phase;
 	unsigned int period;
@@ -34,6 +36,11 @@
 	unsigned long brightness = LED_OFF;
 	unsigned long delay = 0;
 
+	if (unlikely(panic_heartbeats)) {
+		led_set_brightness(led_cdev, LED_OFF);
+		return;
+	}
+
 	/* acts like an actual heart beat -- ie thump-thump-pause... */
 	switch (heartbeat_data->phase) {
 	case 0:
@@ -111,12 +118,19 @@
 	return NOTIFY_DONE;
 }
 
+static int heartbeat_panic_notifier(struct notifier_block *nb,
+				     unsigned long code, void *unused)
+{
+	panic_heartbeats = 1;
+	return NOTIFY_DONE;
+}
+
 static struct notifier_block heartbeat_reboot_nb = {
 	.notifier_call = heartbeat_reboot_notifier,
 };
 
 static struct notifier_block heartbeat_panic_nb = {
-	.notifier_call = heartbeat_reboot_notifier,
+	.notifier_call = heartbeat_panic_notifier,
 };
 
 static int __init heartbeat_trig_init(void)
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 37fdaf8..ce59824 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -2292,6 +2292,13 @@
 	if (r)
 		return r;
 
+	r = dm_pool_commit_metadata(pool->pmd);
+	if (r) {
+		DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+		      __func__, r);
+		return r;
+	}
+
 	r = dm_pool_reserve_metadata_snap(pool->pmd);
 	if (r)
 		DMWARN("reserve_metadata_snap message failed.");
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 1c2f904..a4c219e 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5784,8 +5784,7 @@
 			super_types[mddev->major_version].
 				validate_super(mddev, rdev);
 		if ((info->state & (1<<MD_DISK_SYNC)) &&
-		    (!test_bit(In_sync, &rdev->flags) ||
-		     rdev->raid_disk != info->raid_disk)) {
+		     rdev->raid_disk != info->raid_disk) {
 			/* This was a hot-add request, but events doesn't
 			 * match, so reject it.
 			 */
@@ -6751,7 +6750,7 @@
 	thread->tsk = kthread_run(md_thread, thread,
 				  "%s_%s",
 				  mdname(thread->mddev),
-				  name ?: mddev->pers->name);
+				  name);
 	if (IS_ERR(thread->tsk)) {
 		kfree(thread);
 		return NULL;
@@ -7298,6 +7297,7 @@
 	int skipped = 0;
 	struct md_rdev *rdev;
 	char *desc;
+	struct blk_plug plug;
 
 	/* just incase thread restarts... */
 	if (test_bit(MD_RECOVERY_DONE, &mddev->recovery))
@@ -7447,6 +7447,7 @@
 	}
 	mddev->curr_resync_completed = j;
 
+	blk_start_plug(&plug);
 	while (j < max_sectors) {
 		sector_t sectors;
 
@@ -7552,6 +7553,7 @@
 	 * this also signals 'finished resyncing' to md_stop
 	 */
  out:
+	blk_finish_plug(&plug);
 	wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active));
 
 	/* tell personality that we are finished */
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 9339e67..61a1833 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -474,7 +474,8 @@
 	}
 
 	{
-		mddev->thread = md_register_thread(multipathd, mddev, NULL);
+		mddev->thread = md_register_thread(multipathd, mddev,
+						   "multipath");
 		if (!mddev->thread) {
 			printk(KERN_ERR "multipath: couldn't allocate thread"
 				" for %s\n", mdname(mddev));
diff --git a/drivers/md/persistent-data/dm-space-map-checker.c b/drivers/md/persistent-data/dm-space-map-checker.c
index 50ed53b..fc90c11 100644
--- a/drivers/md/persistent-data/dm-space-map-checker.c
+++ b/drivers/md/persistent-data/dm-space-map-checker.c
@@ -8,6 +8,7 @@
 
 #include <linux/device-mapper.h>
 #include <linux/export.h>
+#include <linux/vmalloc.h>
 
 #ifdef CONFIG_DM_DEBUG_SPACE_MAPS
 
@@ -89,13 +90,23 @@
 
 	ca->nr = nr_blocks;
 	ca->nr_free = nr_blocks;
-	ca->counts = kzalloc(sizeof(*ca->counts) * nr_blocks, GFP_KERNEL);
-	if (!ca->counts)
-		return -ENOMEM;
+
+	if (!nr_blocks)
+		ca->counts = NULL;
+	else {
+		ca->counts = vzalloc(sizeof(*ca->counts) * nr_blocks);
+		if (!ca->counts)
+			return -ENOMEM;
+	}
 
 	return 0;
 }
 
+static void ca_destroy(struct count_array *ca)
+{
+	vfree(ca->counts);
+}
+
 static int ca_load(struct count_array *ca, struct dm_space_map *sm)
 {
 	int r;
@@ -126,12 +137,14 @@
 static int ca_extend(struct count_array *ca, dm_block_t extra_blocks)
 {
 	dm_block_t nr_blocks = ca->nr + extra_blocks;
-	uint32_t *counts = kzalloc(sizeof(*counts) * nr_blocks, GFP_KERNEL);
+	uint32_t *counts = vzalloc(sizeof(*counts) * nr_blocks);
 	if (!counts)
 		return -ENOMEM;
 
-	memcpy(counts, ca->counts, sizeof(*counts) * ca->nr);
-	kfree(ca->counts);
+	if (ca->counts) {
+		memcpy(counts, ca->counts, sizeof(*counts) * ca->nr);
+		ca_destroy(ca);
+	}
 	ca->nr = nr_blocks;
 	ca->nr_free += extra_blocks;
 	ca->counts = counts;
@@ -151,11 +164,6 @@
 	return 0;
 }
 
-static void ca_destroy(struct count_array *ca)
-{
-	kfree(ca->counts);
-}
-
 /*----------------------------------------------------------------*/
 
 struct sm_checker {
@@ -343,25 +351,25 @@
 	int r;
 	struct sm_checker *smc;
 
-	if (!sm)
-		return NULL;
+	if (IS_ERR_OR_NULL(sm))
+		return ERR_PTR(-EINVAL);
 
 	smc = kmalloc(sizeof(*smc), GFP_KERNEL);
 	if (!smc)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	memcpy(&smc->sm, &ops_, sizeof(smc->sm));
 	r = ca_create(&smc->old_counts, sm);
 	if (r) {
 		kfree(smc);
-		return NULL;
+		return ERR_PTR(r);
 	}
 
 	r = ca_create(&smc->counts, sm);
 	if (r) {
 		ca_destroy(&smc->old_counts);
 		kfree(smc);
-		return NULL;
+		return ERR_PTR(r);
 	}
 
 	smc->real_sm = sm;
@@ -371,7 +379,7 @@
 		ca_destroy(&smc->counts);
 		ca_destroy(&smc->old_counts);
 		kfree(smc);
-		return NULL;
+		return ERR_PTR(r);
 	}
 
 	r = ca_commit(&smc->old_counts, &smc->counts);
@@ -379,7 +387,7 @@
 		ca_destroy(&smc->counts);
 		ca_destroy(&smc->old_counts);
 		kfree(smc);
-		return NULL;
+		return ERR_PTR(r);
 	}
 
 	return &smc->sm;
@@ -391,25 +399,25 @@
 	int r;
 	struct sm_checker *smc;
 
-	if (!sm)
-		return NULL;
+	if (IS_ERR_OR_NULL(sm))
+		return ERR_PTR(-EINVAL);
 
 	smc = kmalloc(sizeof(*smc), GFP_KERNEL);
 	if (!smc)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	memcpy(&smc->sm, &ops_, sizeof(smc->sm));
 	r = ca_create(&smc->old_counts, sm);
 	if (r) {
 		kfree(smc);
-		return NULL;
+		return ERR_PTR(r);
 	}
 
 	r = ca_create(&smc->counts, sm);
 	if (r) {
 		ca_destroy(&smc->old_counts);
 		kfree(smc);
-		return NULL;
+		return ERR_PTR(r);
 	}
 
 	smc->real_sm = sm;
diff --git a/drivers/md/persistent-data/dm-space-map-disk.c b/drivers/md/persistent-data/dm-space-map-disk.c
index fc469ba..3d0ed53 100644
--- a/drivers/md/persistent-data/dm-space-map-disk.c
+++ b/drivers/md/persistent-data/dm-space-map-disk.c
@@ -290,7 +290,16 @@
 				       dm_block_t nr_blocks)
 {
 	struct dm_space_map *sm = dm_sm_disk_create_real(tm, nr_blocks);
-	return dm_sm_checker_create_fresh(sm);
+	struct dm_space_map *smc;
+
+	if (IS_ERR_OR_NULL(sm))
+		return sm;
+
+	smc = dm_sm_checker_create_fresh(sm);
+	if (IS_ERR(smc))
+		dm_sm_destroy(sm);
+
+	return smc;
 }
 EXPORT_SYMBOL_GPL(dm_sm_disk_create);
 
diff --git a/drivers/md/persistent-data/dm-transaction-manager.c b/drivers/md/persistent-data/dm-transaction-manager.c
index 400fe14..e5604b3 100644
--- a/drivers/md/persistent-data/dm-transaction-manager.c
+++ b/drivers/md/persistent-data/dm-transaction-manager.c
@@ -138,6 +138,9 @@
 
 void dm_tm_destroy(struct dm_transaction_manager *tm)
 {
+	if (!tm->is_clone)
+		wipe_shadow_table(tm);
+
 	kfree(tm);
 }
 EXPORT_SYMBOL_GPL(dm_tm_destroy);
@@ -344,8 +347,10 @@
 		}
 
 		*sm = dm_sm_checker_create(inner);
-		if (!*sm)
+		if (IS_ERR(*sm)) {
+			r = PTR_ERR(*sm);
 			goto bad2;
+		}
 
 	} else {
 		r = dm_bm_write_lock(dm_tm_get_bm(*tm), sb_location,
@@ -364,8 +369,10 @@
 		}
 
 		*sm = dm_sm_checker_create(inner);
-		if (!*sm)
+		if (IS_ERR(*sm)) {
+			r = PTR_ERR(*sm);
 			goto bad2;
+		}
 	}
 
 	return 0;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index a9c7981..8c2754f 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -517,8 +517,8 @@
 		int bad_sectors;
 
 		int disk = start_disk + i;
-		if (disk >= conf->raid_disks)
-			disk -= conf->raid_disks;
+		if (disk >= conf->raid_disks * 2)
+			disk -= conf->raid_disks * 2;
 
 		rdev = rcu_dereference(conf->mirrors[disk].rdev);
 		if (r1_bio->bios[disk] == IO_BLOCKED
@@ -883,7 +883,6 @@
 	const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
 	const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA));
 	struct md_rdev *blocked_rdev;
-	int plugged;
 	int first_clone;
 	int sectors_handled;
 	int max_sectors;
@@ -1034,7 +1033,6 @@
 	 * the bad blocks.  Each set of writes gets it's own r1bio
 	 * with a set of bios attached.
 	 */
-	plugged = mddev_check_plugged(mddev);
 
 	disks = conf->raid_disks * 2;
  retry_write:
@@ -1191,6 +1189,8 @@
 		bio_list_add(&conf->pending_bio_list, mbio);
 		conf->pending_count++;
 		spin_unlock_irqrestore(&conf->device_lock, flags);
+		if (!mddev_check_plugged(mddev))
+			md_wakeup_thread(mddev->thread);
 	}
 	/* Mustn't call r1_bio_write_done before this next test,
 	 * as it could result in the bio being freed.
@@ -1213,9 +1213,6 @@
 
 	/* In case raid1d snuck in to freeze_array */
 	wake_up(&conf->wait_barrier);
-
-	if (do_sync || !bitmap || !plugged)
-		md_wakeup_thread(mddev->thread);
 }
 
 static void status(struct seq_file *seq, struct mddev *mddev)
@@ -2621,7 +2618,7 @@
 		goto abort;
 	}
 	err = -ENOMEM;
-	conf->thread = md_register_thread(raid1d, mddev, NULL);
+	conf->thread = md_register_thread(raid1d, mddev, "raid1");
 	if (!conf->thread) {
 		printk(KERN_ERR
 		       "md/raid1:%s: couldn't allocate thread\n",
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 99ae606..8da6282 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1039,7 +1039,6 @@
 	const unsigned long do_fua = (bio->bi_rw & REQ_FUA);
 	unsigned long flags;
 	struct md_rdev *blocked_rdev;
-	int plugged;
 	int sectors_handled;
 	int max_sectors;
 	int sectors;
@@ -1239,7 +1238,6 @@
 	 * of r10_bios is recored in bio->bi_phys_segments just as with
 	 * the read case.
 	 */
-	plugged = mddev_check_plugged(mddev);
 
 	r10_bio->read_slot = -1; /* make sure repl_bio gets freed */
 	raid10_find_phys(conf, r10_bio);
@@ -1396,6 +1394,8 @@
 		bio_list_add(&conf->pending_bio_list, mbio);
 		conf->pending_count++;
 		spin_unlock_irqrestore(&conf->device_lock, flags);
+		if (!mddev_check_plugged(mddev))
+			md_wakeup_thread(mddev->thread);
 
 		if (!r10_bio->devs[i].repl_bio)
 			continue;
@@ -1423,6 +1423,8 @@
 		bio_list_add(&conf->pending_bio_list, mbio);
 		conf->pending_count++;
 		spin_unlock_irqrestore(&conf->device_lock, flags);
+		if (!mddev_check_plugged(mddev))
+			md_wakeup_thread(mddev->thread);
 	}
 
 	/* Don't remove the bias on 'remaining' (one_write_done) until
@@ -1448,9 +1450,6 @@
 
 	/* In case raid10d snuck in to freeze_array */
 	wake_up(&conf->wait_barrier);
-
-	if (do_sync || !mddev->bitmap || !plugged)
-		md_wakeup_thread(mddev->thread);
 }
 
 static void status(struct seq_file *seq, struct mddev *mddev)
@@ -2310,7 +2309,7 @@
 			if (r10_sync_page_io(rdev,
 					     r10_bio->devs[sl].addr +
 					     sect,
-					     s<<9, conf->tmppage, WRITE)
+					     s, conf->tmppage, WRITE)
 			    == 0) {
 				/* Well, this device is dead */
 				printk(KERN_NOTICE
@@ -2349,7 +2348,7 @@
 			switch (r10_sync_page_io(rdev,
 					     r10_bio->devs[sl].addr +
 					     sect,
-					     s<<9, conf->tmppage,
+					     s, conf->tmppage,
 						 READ)) {
 			case 0:
 				/* Well, this device is dead */
@@ -2512,7 +2511,7 @@
 	slot = r10_bio->read_slot;
 	printk_ratelimited(
 		KERN_ERR
-		"md/raid10:%s: %s: redirecting"
+		"md/raid10:%s: %s: redirecting "
 		"sector %llu to another mirror\n",
 		mdname(mddev),
 		bdevname(rdev->bdev, b),
@@ -2661,7 +2660,8 @@
 	blk_start_plug(&plug);
 	for (;;) {
 
-		flush_pending_writes(conf);
+		if (atomic_read(&mddev->plug_cnt) == 0)
+			flush_pending_writes(conf);
 
 		spin_lock_irqsave(&conf->device_lock, flags);
 		if (list_empty(head)) {
@@ -2890,6 +2890,12 @@
 			/* want to reconstruct this device */
 			rb2 = r10_bio;
 			sect = raid10_find_virt(conf, sector_nr, i);
+			if (sect >= mddev->resync_max_sectors) {
+				/* last stripe is not complete - don't
+				 * try to recover this sector.
+				 */
+				continue;
+			}
 			/* Unless we are doing a full sync, or a replacement
 			 * we only need to recover the block if it is set in
 			 * the bitmap
@@ -3421,7 +3427,7 @@
 	spin_lock_init(&conf->resync_lock);
 	init_waitqueue_head(&conf->wait_barrier);
 
-	conf->thread = md_register_thread(raid10d, mddev, NULL);
+	conf->thread = md_register_thread(raid10d, mddev, "raid10");
 	if (!conf->thread)
 		goto out;
 
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index d267672..04348d7 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -196,12 +196,14 @@
 		BUG_ON(!list_empty(&sh->lru));
 		BUG_ON(atomic_read(&conf->active_stripes)==0);
 		if (test_bit(STRIPE_HANDLE, &sh->state)) {
-			if (test_bit(STRIPE_DELAYED, &sh->state))
+			if (test_bit(STRIPE_DELAYED, &sh->state) &&
+			    !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
 				list_add_tail(&sh->lru, &conf->delayed_list);
 			else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
 				   sh->bm_seq - conf->seq_write > 0)
 				list_add_tail(&sh->lru, &conf->bitmap_list);
 			else {
+				clear_bit(STRIPE_DELAYED, &sh->state);
 				clear_bit(STRIPE_BIT_DELAY, &sh->state);
 				list_add_tail(&sh->lru, &conf->handle_list);
 			}
@@ -606,6 +608,12 @@
 					 * a chance*/
 					md_check_recovery(conf->mddev);
 				}
+				/*
+				 * Because md_wait_for_blocked_rdev
+				 * will dec nr_pending, we must
+				 * increment it first.
+				 */
+				atomic_inc(&rdev->nr_pending);
 				md_wait_for_blocked_rdev(rdev, conf->mddev);
 			} else {
 				/* Acknowledged bad block - skip the write */
@@ -1737,6 +1745,7 @@
 	} else {
 		const char *bdn = bdevname(rdev->bdev, b);
 		int retry = 0;
+		int set_bad = 0;
 
 		clear_bit(R5_UPTODATE, &sh->dev[i].flags);
 		atomic_inc(&rdev->read_errors);
@@ -1748,7 +1757,8 @@
 				mdname(conf->mddev),
 				(unsigned long long)s,
 				bdn);
-		else if (conf->mddev->degraded >= conf->max_degraded)
+		else if (conf->mddev->degraded >= conf->max_degraded) {
+			set_bad = 1;
 			printk_ratelimited(
 				KERN_WARNING
 				"md/raid:%s: read error not correctable "
@@ -1756,8 +1766,9 @@
 				mdname(conf->mddev),
 				(unsigned long long)s,
 				bdn);
-		else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
+		} else if (test_bit(R5_ReWrite, &sh->dev[i].flags)) {
 			/* Oh, no!!! */
+			set_bad = 1;
 			printk_ratelimited(
 				KERN_WARNING
 				"md/raid:%s: read error NOT corrected!! "
@@ -1765,7 +1776,7 @@
 				mdname(conf->mddev),
 				(unsigned long long)s,
 				bdn);
-		else if (atomic_read(&rdev->read_errors)
+		} else if (atomic_read(&rdev->read_errors)
 			 > conf->max_nr_stripes)
 			printk(KERN_WARNING
 			       "md/raid:%s: Too many read errors, failing device %s.\n",
@@ -1777,7 +1788,11 @@
 		else {
 			clear_bit(R5_ReadError, &sh->dev[i].flags);
 			clear_bit(R5_ReWrite, &sh->dev[i].flags);
-			md_error(conf->mddev, rdev);
+			if (!(set_bad
+			      && test_bit(In_sync, &rdev->flags)
+			      && rdev_set_badblocks(
+				      rdev, sh->sector, STRIPE_SECTORS, 0)))
+				md_error(conf->mddev, rdev);
 		}
 	}
 	rdev_dec_pending(rdev, conf->mddev);
@@ -3582,8 +3597,18 @@
 
 finish:
 	/* wait for this device to become unblocked */
-	if (conf->mddev->external && unlikely(s.blocked_rdev))
-		md_wait_for_blocked_rdev(s.blocked_rdev, conf->mddev);
+	if (unlikely(s.blocked_rdev)) {
+		if (conf->mddev->external)
+			md_wait_for_blocked_rdev(s.blocked_rdev,
+						 conf->mddev);
+		else
+			/* Internal metadata will immediately
+			 * be written by raid5d, so we don't
+			 * need to wait here.
+			 */
+			rdev_dec_pending(s.blocked_rdev,
+					 conf->mddev);
+	}
 
 	if (s.handle_bad_blocks)
 		for (i = disks; i--; ) {
@@ -3881,8 +3906,6 @@
 		raid_bio->bi_next = (void*)rdev;
 		align_bi->bi_bdev =  rdev->bdev;
 		align_bi->bi_flags &= ~(1 << BIO_SEG_VALID);
-		/* No reshape active, so we can trust rdev->data_offset */
-		align_bi->bi_sector += rdev->data_offset;
 
 		if (!bio_fits_rdev(align_bi) ||
 		    is_badblock(rdev, align_bi->bi_sector, align_bi->bi_size>>9,
@@ -3893,6 +3916,9 @@
 			return 0;
 		}
 
+		/* No reshape active, so we can trust rdev->data_offset */
+		align_bi->bi_sector += rdev->data_offset;
+
 		spin_lock_irq(&conf->device_lock);
 		wait_event_lock_irq(conf->wait_for_stripe,
 				    conf->quiesce == 0,
@@ -3971,7 +3997,6 @@
 	struct stripe_head *sh;
 	const int rw = bio_data_dir(bi);
 	int remaining;
-	int plugged;
 
 	if (unlikely(bi->bi_rw & REQ_FLUSH)) {
 		md_flush_request(mddev, bi);
@@ -3990,7 +4015,6 @@
 	bi->bi_next = NULL;
 	bi->bi_phys_segments = 1;	/* over-loaded to count active stripes */
 
-	plugged = mddev_check_plugged(mddev);
 	for (;logical_sector < last_sector; logical_sector += STRIPE_SECTORS) {
 		DEFINE_WAIT(w);
 		int previous;
@@ -4092,6 +4116,7 @@
 			if ((bi->bi_rw & REQ_SYNC) &&
 			    !test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
 				atomic_inc(&conf->preread_active_stripes);
+			mddev_check_plugged(mddev);
 			release_stripe(sh);
 		} else {
 			/* cannot get stripe for read-ahead, just give-up */
@@ -4099,10 +4124,7 @@
 			finish_wait(&conf->wait_for_overlap, &w);
 			break;
 		}
-			
 	}
-	if (!plugged)
-		md_wakeup_thread(mddev->thread);
 
 	spin_lock_irq(&conf->device_lock);
 	remaining = raid5_dec_bi_phys_segments(bi);
@@ -4823,6 +4845,7 @@
 	int raid_disk, memory, max_disks;
 	struct md_rdev *rdev;
 	struct disk_info *disk;
+	char pers_name[6];
 
 	if (mddev->new_level != 5
 	    && mddev->new_level != 4
@@ -4946,7 +4969,8 @@
 		printk(KERN_INFO "md/raid:%s: allocated %dkB\n",
 		       mdname(mddev), memory);
 
-	conf->thread = md_register_thread(raid5d, mddev, NULL);
+	sprintf(pers_name, "raid%d", mddev->new_level);
+	conf->thread = md_register_thread(raid5d, mddev, pers_name);
 	if (!conf->thread) {
 		printk(KERN_ERR
 		       "md/raid:%s: couldn't allocate thread.\n",
@@ -5465,10 +5489,9 @@
 	if (rdev->saved_raid_disk >= 0 &&
 	    rdev->saved_raid_disk >= first &&
 	    conf->disks[rdev->saved_raid_disk].rdev == NULL)
-		disk = rdev->saved_raid_disk;
-	else
-		disk = first;
-	for ( ; disk <= last ; disk++) {
+		first = rdev->saved_raid_disk;
+
+	for (disk = first; disk <= last; disk++) {
 		p = conf->disks + disk;
 		if (p->rdev == NULL) {
 			clear_bit(In_sync, &rdev->flags);
@@ -5477,8 +5500,11 @@
 			if (rdev->saved_raid_disk != disk)
 				conf->fullsync = 1;
 			rcu_assign_pointer(p->rdev, rdev);
-			break;
+			goto out;
 		}
+	}
+	for (disk = first; disk <= last; disk++) {
+		p = conf->disks + disk;
 		if (test_bit(WantReplacement, &p->rdev->flags) &&
 		    p->replacement == NULL) {
 			clear_bit(In_sync, &rdev->flags);
@@ -5490,6 +5516,7 @@
 			break;
 		}
 	}
+out:
 	print_raid5_conf(conf);
 	return err;
 }
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index 7d42c11..0cdbd74 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -198,7 +198,6 @@
 	struct saa7146_dev *dev = video_drvdata(file);
 	struct saa7146_fh *fh = NULL;
 	int result = 0;
-	enum v4l2_buf_type type;
 
 	DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev));
 
@@ -207,10 +206,6 @@
 
 	DEB_D("using: %p\n", dev);
 
-	type = vdev->vfl_type == VFL_TYPE_GRABBER
-	     ? V4L2_BUF_TYPE_VIDEO_CAPTURE
-	     : V4L2_BUF_TYPE_VBI_CAPTURE;
-
 	/* check if an extension is registered */
 	if( NULL == dev->ext ) {
 		DEB_S("no extension registered for this device\n");
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index 98ecaf0..3180f5b 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -516,9 +516,9 @@
 	if(cx24110_readreg(state,0x10)&0x40) {
 		/* the RS error counter has finished one counting window */
 		cx24110_writereg(state,0x10,0x60); /* select the byer reg */
-		cx24110_readreg(state, 0x12) |
+		(void)(cx24110_readreg(state, 0x12) |
 			(cx24110_readreg(state, 0x13) << 8) |
-			(cx24110_readreg(state, 0x14) << 16);
+			(cx24110_readreg(state, 0x14) << 16));
 		cx24110_writereg(state,0x10,0x70); /* select the bler reg */
 		state->lastbler=cx24110_readreg(state,0x12)|
 			(cx24110_readreg(state,0x13)<<8)|
diff --git a/drivers/media/dvb/frontends/cxd2820r_c.c b/drivers/media/dvb/frontends/cxd2820r_c.c
index 9454049..ed3b0ba6 100644
--- a/drivers/media/dvb/frontends/cxd2820r_c.c
+++ b/drivers/media/dvb/frontends/cxd2820r_c.c
@@ -121,7 +121,7 @@
 	if (ret)
 		goto error;
 
-	switch ((buf[0] >> 0) & 0x03) {
+	switch ((buf[0] >> 0) & 0x07) {
 	case 0:
 		c->modulation = QAM_16;
 		break;
diff --git a/drivers/media/dvb/frontends/lg2160.c b/drivers/media/dvb/frontends/lg2160.c
index a3ab1a5..cc11260 100644
--- a/drivers/media/dvb/frontends/lg2160.c
+++ b/drivers/media/dvb/frontends/lg2160.c
@@ -126,7 +126,7 @@
 
 	lg_reg("writing %d registers...\n", len);
 
-	for (i = 0; i < len - 1; i++) {
+	for (i = 0; i < len; i++) {
 		ret = lg216x_write_reg(state, regs[i].reg, regs[i].val);
 		if (lg_fail(ret))
 			return ret;
diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c
index 63c004a..664e460 100644
--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -544,6 +544,8 @@
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
 	{ USB_DEVICE(0x2040, 0xc0a0),
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+	{ USB_DEVICE(0x2040, 0xf5a0),
+		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
 	{ } /* Terminating entry */
 	};
 
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index 740a3d5..b415211 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -157,7 +157,7 @@
 		goto err_out_free_region;
 
 	dev->io = pci_resource_start(pdev, 0);
-	if (snd_tea575x_init(&dev->tea)) {
+	if (snd_tea575x_init(&dev->tea, THIS_MODULE)) {
 		printk(KERN_ERR "radio-maxiradio: Unable to detect TEA575x tuner\n");
 		goto err_out_free_region;
 	}
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index 52b8011..4efcbec 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -238,7 +238,7 @@
 	snprintf(fmr2->tea.bus_info, sizeof(fmr2->tea.bus_info), "%s:%s",
 			fmr2->is_fmd2 ? "PnP" : "ISA", dev_name(pdev));
 
-	if (snd_tea575x_init(&fmr2->tea)) {
+	if (snd_tea575x_init(&fmr2->tea, THIS_MODULE)) {
 		printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n");
 		release_region(fmr2->io, 2);
 		return -ENODEV;
diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index e9f6387..f412f7a 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -51,6 +51,8 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) },
 	/* Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x10c5, 0x819a, USB_CLASS_HID, 0, 0) },
+	/* Axentia ALERT FM USB Receiver */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x12cf, 0x7111, USB_CLASS_HID, 0, 0) },
 	/* Terminating entry */
 	{ }
 };
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index ff2933a..856ab96 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -371,7 +371,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 2, 0, 0, 0 },
 		.gpiomute 	= 10,
-		.needs_tvaudio	= 1,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
 	},
@@ -384,7 +383,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0, 1, 2, 3 },
 		.gpiomute 	= 4,
-		.needs_tvaudio	= 1,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
 	},
@@ -398,7 +396,6 @@
 		.gpiomux 	= { 4, 0, 2, 3 },
 		.gpiomute 	= 1,
 		.no_msp34xx	= 1,
-		.needs_tvaudio	= 1,
 		.tuner_type     = TUNER_PHILIPS_NTSC,
 		.tuner_addr	= ADDR_UNSET,
 		.pll            = PLL_28,
@@ -414,7 +411,6 @@
 		.gpiomask	= 0,
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0 },
-		.needs_tvaudio	= 0,
 		.tuner_type	= TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
 	},
@@ -427,7 +423,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 0),
 		.gpiomux 	= { 0, 1, 0, 1 },
 		.gpiomute 	= 3,
-		.needs_tvaudio	= 1,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
 	},
@@ -440,7 +435,6 @@
 		.gpiomask	= 0x0f,
 		.gpiomux 	= { 0x0c, 0x04, 0x08, 0x04 },
 		/*                0x04 for some cards ?? */
-		.needs_tvaudio	= 1,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.audio_mode_gpio= avermedia_tvphone_audio,
@@ -454,7 +448,6 @@
 		.gpiomask	= 0,
 		.muxsel		= MUXSEL(2, 3, 1, 0, 0),
 		.gpiomux 	= { 0 },
-		.needs_tvaudio	= 1,
 		.tuner_type	= TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
 	},
@@ -469,7 +462,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0, 0xc00, 0x800, 0x400 },
 		.gpiomute 	= 0xc00,
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
@@ -482,7 +474,6 @@
 		.gpiomask	= 3,
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 1, 1, 2, 3 },
-		.needs_tvaudio	= 0,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_TEMIC_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -496,7 +487,6 @@
 		.muxsel		= MUXSEL(2, 0, 1, 1),
 		.gpiomux 	= { 0, 1, 2, 3 },
 		.gpiomute 	= 4,
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
@@ -510,7 +500,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0x20001,0x10001, 0, 0 },
 		.gpiomute 	= 10,
-		.needs_tvaudio	= 1,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
 	},
@@ -524,7 +513,6 @@
 		.gpiomask	= 15,
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 13, 14, 11, 7 },
-		.needs_tvaudio	= 1,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
 	},
@@ -536,7 +524,6 @@
 		.gpiomask	= 15,
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 13, 14, 11, 7 },
-		.needs_tvaudio	= 1,
 		.msp34xx_alt    = 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL,
@@ -553,7 +540,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
 		.gpiomute 	= 4,
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
@@ -567,7 +553,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0, 0, 1, 0 },
 		.gpiomute 	= 10,
-		.needs_tvaudio	= 1,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
 	},
@@ -583,7 +568,6 @@
 		/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 		.gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 		.gpiomute 	= 0x002000,
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= UNSET,
 		.tuner_addr     = ADDR_UNSET,
@@ -597,7 +581,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1, 0),
 		.gpiomux 	= { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
 		.gpiomute 	= 0xcfa007,
-		.needs_tvaudio	= 1,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.volume_gpio	= winview_volume,
@@ -611,7 +594,6 @@
 		.gpiomask	= 0,
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 1, 0, 0, 0 },
-		.needs_tvaudio	= 1,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
 	},
@@ -660,7 +642,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0, 1, 0x800, 0x400 },
 		.gpiomute 	= 0xc00,
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
@@ -691,7 +672,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= {0x400, 0x400, 0x400, 0x400 },
 		.gpiomute 	= 0xc00,
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
@@ -706,7 +686,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
 		.gpiomute 	= 0x40000,
-		.needs_tvaudio	= 0,
 		.tuner_type	= TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
 		.audio_mode_gpio= terratv_audio,
@@ -720,7 +699,6 @@
 		.muxsel		= MUXSEL(2, 0, 1, 1),
 		.gpiomux 	= { 0, 1, 2, 3 },
 		.gpiomute 	= 4,
-		.needs_tvaudio	= 1,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
 	},
@@ -748,7 +726,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0x20000, 0x30000, 0x10000, 0x00000 },
 		.gpiomute 	= 0x40000,
-		.needs_tvaudio	= 0,
 		.tuner_type	= TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
 		.audio_mode_gpio= terratv_audio,
@@ -793,7 +770,6 @@
 		.gpiomask	= 0,
 		.muxsel		= MUXSEL(2, 3, 1, 0, 0),
 		.gpiomux 	= { 0 },
-		.needs_tvaudio	= 1,
 		.tuner_type	= TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
 		.muxsel_hook    = PXC200_muxsel,
@@ -834,7 +810,6 @@
 		.gpiomask	= 0,
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0 },
-		.needs_tvaudio	= 0,
 		.tuner_type	= TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
 	},
@@ -847,7 +822,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0x500, 0, 0x300, 0x900 },
 		.gpiomute 	= 0x900,
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -874,7 +848,6 @@
 		Note: There exists another variant "Winfast 2000" with tv stereo !?
 		Note: eeprom only contains FF and pci subsystem id 107d:6606
 		*/
-		.needs_tvaudio	= 0,
 		.pll		= PLL_28,
 		.has_radio	= 1,
 		.tuner_type	= TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
@@ -934,7 +907,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 0),
 		.gpiomux 	= { 0x551400, 0x551200, 0, 0 },
 		.gpiomute 	= 0x551c00,
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL_I,
 		.tuner_addr	= ADDR_UNSET,
@@ -949,7 +921,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 2, 0xd0001, 0, 0 },
 		.gpiomute 	= 1,
-		.needs_tvaudio	= 0,
 		.pll		= PLL_28,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
@@ -966,7 +937,6 @@
 		.gpiomux 	= { 4, 0, 2, 3 },
 		.gpiomute 	= 1,
 		.no_msp34xx	= 1,
-		.needs_tvaudio	= 1,
 		.tuner_type     = TUNER_PHILIPS_NTSC,
 		.tuner_addr	= ADDR_UNSET,
 		.pll            = PLL_28,
@@ -980,7 +950,6 @@
 		.gpiomask	= 15,
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 13, 4, 11, 7 },
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
@@ -995,7 +964,6 @@
 		.gpiomask	= 0,
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0, 0, 0, 0},
-		.needs_tvaudio	= 1,
 		.no_msp34xx	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL_I,
@@ -1066,7 +1034,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0x20000, 0x30000, 0x10000, 0 },
 		.gpiomute 	= 0x40000,
-		.needs_tvaudio	= 1,
 		.no_msp34xx	= 1,
 		.pll		= PLL_35,
 		.tuner_type	= TUNER_PHILIPS_PAL_I,
@@ -1084,7 +1051,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= {2,0,0,0 },
 		.gpiomute 	= 1,
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
@@ -1163,7 +1129,6 @@
 				MUX2 (mask 0x30000):
 					0,2,3= from MSP34xx
 					1= FM stereo Radio from Tuner */
-		.needs_tvaudio  = 0,
 		.pll            = PLL_28,
 		.tuner_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
@@ -1179,7 +1144,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0, 0, 0x10, 8 },
 		.gpiomute 	= 4,
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -1218,7 +1182,6 @@
 		.muxsel         = MUXSEL(2, 3, 1, 0),
 		.gpiomux        = { 2, 0, 0, 0 },
 		.gpiomute 	= 10,
-		.needs_tvaudio  = 0,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_TEMIC_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -1250,7 +1213,6 @@
 		.gpiomask       = 0,
 		.muxsel         = MUXSEL(3, 1),
 		.gpiomux        = { 0 },
-		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.pll            = PLL_35,
 		.tuner_type     = TUNER_ABSENT,
@@ -1266,7 +1228,6 @@
 		.muxsel         = MUXSEL(2, 3, 1, 1),
 		.gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
 		.gpiomute 	= 0x800,
-		.needs_tvaudio  = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
 		.tuner_addr	= ADDR_UNSET,
@@ -1312,7 +1273,6 @@
 		.muxsel		= MUXSEL(2, 2),
 		.gpiomux        = { },
 		.no_msp34xx     = 1,
-		.needs_tvaudio  = 0,
 		.pll		= PLL_28,
 		.tuner_type     = TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
@@ -1329,7 +1289,6 @@
 		.muxsel         = MUXSEL(2, 3, 1, 0),
 		.gpiomux        = { 1, 0, 4, 4 },
 		.gpiomute 	= 9,
-		.needs_tvaudio  = 0,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -1379,7 +1338,6 @@
 		.gpiomute 	= 0x1800,
 		.audio_mode_gpio= fv2000s_audio,
 		.no_msp34xx	= 1,
-		.needs_tvaudio  = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -1393,7 +1351,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0x500, 0x500, 0x300, 0x900 },
 		.gpiomute 	= 0x900,
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -1477,7 +1434,6 @@
 		.muxsel         = MUXSEL(2, 3, 1, 1),
 		.gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
 		.gpiomute 	= 13,
-		.needs_tvaudio  = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_LG_PAL_I_FM,
 		.tuner_addr	= ADDR_UNSET,
@@ -1514,7 +1470,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 0x01, 0x00, 0x03, 0x03 },
 		.gpiomute 	= 0x09,
-		.needs_tvaudio  = 1,
 		.no_msp34xx	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_PAL,
@@ -1540,7 +1495,6 @@
 		.gpiomask       = 0,
 		.muxsel         = MUXSEL(2, 3, 1, 0, 0),
 		.gpiomux        = { 0 },
-		.needs_tvaudio  = 0,
 		.tuner_type     = TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
 	},
@@ -1567,7 +1521,6 @@
 		.muxsel         = MUXSEL(2, 1, 1),
 		.gpiomux        = { 0, 1, 2, 2 },
 		.gpiomute 	= 4,
-		.needs_tvaudio  = 0,
 		.tuner_type     = TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
 		.pll		= PLL_28,
@@ -1597,7 +1550,6 @@
 		.gpiomask       = 0,
 		.muxsel         = MUXSEL(2, 3, 1, 0),
 		.gpiomux        = { 0 },
-		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_ABSENT,
@@ -1619,7 +1571,6 @@
 						* btwincap uses 0x80000/0x80003
 						*/
 		.gpiomute 	= 4,
-		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_PHILIPS_PAL,
@@ -1655,7 +1606,6 @@
 		/* .audio_inputs= 1, */
 		.svhs           = 2,
 		.muxsel         = MUXSEL(2, 0, 1, 1),
-		.needs_tvaudio  = 1,
 		.pll            = PLL_28,
 		.tuner_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
@@ -1875,7 +1825,6 @@
 		.muxsel         = MUXSEL(2, 3, 1, 1),
 		.gpiomux        = { 0, 1, 2, 3},
 		.gpiomute 	= 4,
-		.needs_tvaudio  = 1,
 		.tuner_type     = TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
 		.pll            = PLL_28,
@@ -1902,7 +1851,6 @@
 		.gpiomask       = 0,
 		.muxsel         = MUXSEL(2, 3),
 		.gpiomux        = { 0 },
-		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_ABSENT,
@@ -1920,7 +1868,6 @@
 		/*                  Tuner, Radio, external, internal, off,  on */
 		.gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
 		.gpiomute 	= 0x0f,
-		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_PHILIPS_NTSC,
@@ -1936,7 +1883,6 @@
 		.svhs           = 2,
 		.gpiomask       = 0x00,
 		.muxsel         = MUXSEL(2, 3, 1, 1),
-		.needs_tvaudio  = 1,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_PHILIPS_PAL,
@@ -2034,7 +1980,6 @@
 		.gpiomask       = 0,
 		.muxsel         = MUXSEL(2, 3, 1, 0),
 		.gpiomux        = { 0 },
-		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_ABSENT,
@@ -2049,7 +1994,6 @@
 		.gpiomask       = 0x00,
 		.muxsel         = MUXSEL(2, 3, 1, 0),
 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
-		.needs_tvaudio  = 0,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
@@ -2062,7 +2006,6 @@
 		.gpiomask       = 0x00,
 		.muxsel         = MUXSEL(2, 3, 1, 1),
 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
-		.needs_tvaudio  = 0,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
@@ -2079,7 +2022,6 @@
 		.muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
 		.muxsel_hook	= phytec_muxsel,
 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
-		.needs_tvaudio  = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
@@ -2094,7 +2036,6 @@
 		.muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
 		.muxsel_hook	= phytec_muxsel,
 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
-		.needs_tvaudio  = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
@@ -2118,7 +2059,6 @@
 		.tuner_type     = TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
 		.svhs           = NO_SVHS,   /* card has no svhs */
-		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.no_tda7432     = 1,
 		.gpiomask       = 0x00,
@@ -2168,7 +2108,6 @@
 		.gpiomask       = 3,
 		.muxsel         = MUXSEL(2, 3, 1, 1),
 		.gpiomux        = { 1, 1, 1, 1 },
-		.needs_tvaudio  = 1,
 		.tuner_type     = TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
 		.pll            = PLL_35,
@@ -2210,7 +2149,6 @@
 		.muxsel         = MUXSEL(2, 3, 1, 0),
 		.no_msp34xx     = 1,
 		.no_tda7432     = 1,
-		.needs_tvaudio  = 0,
 		.tuner_type     = TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
 	},
@@ -2222,7 +2160,6 @@
 		.tuner_type     = TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
 		.svhs           = 2,
-		.needs_tvaudio  = 0,
 		.gpiomask       = 0x68,
 		.muxsel         = MUXSEL(2, 3, 1),
 		.gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
@@ -2241,7 +2178,6 @@
 		.muxsel         = MUXSEL(2, 3, 1, 1),
 		.gpiomux        = { 0, 1, 2, 2 },
 		.gpiomute 	= 3,
-		.needs_tvaudio  = 0,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -2265,7 +2201,6 @@
 		.muxsel         = MUXSEL(2, 2, 2, 2),
 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
 		.pll            = PLL_28,
-		.needs_tvaudio  = 0,
 		.muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
 		.tuner_type     = TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
@@ -2358,7 +2293,6 @@
 		.muxsel         = MUXSEL(2, 3, 1, 1),
 		.gpiomux        = { 2, 0, 0, 0 },
 		.gpiomute 	= 10,
-		.needs_tvaudio  = 0,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_PHILIPS_PAL,
 		.tuner_addr	= ADDR_UNSET,
@@ -2405,7 +2339,6 @@
 		.tuner_addr	= ADDR_UNSET,
 		.gpiomask       = 0x008007,
 		.gpiomux        = { 0, 0x000001,0,0 },
-		.needs_tvaudio  = 1,
 		.has_radio      = 1,
 	},
 	[BTTV_BOARD_TIBET_CS16] = {
@@ -2518,7 +2451,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 		.gpiomute 	= 0x002000,
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_YMEC_TVF66T5_B_DFF,
 		.tuner_addr	= 0xc1 >>1,
@@ -2534,7 +2466,6 @@
 		.muxsel         = MUXSEL(2, 3, 1, 1),
 		.gpiomux        = { 0, 1, 2, 2 },
 		.gpiomute 	= 3,
-		.needs_tvaudio  = 0,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_TENA_9533_DI,
 		.tuner_addr	= ADDR_UNSET,
@@ -2615,7 +2546,6 @@
 		.muxsel		= MUXSEL(2, 3, 1, 1),
 		.gpiomux 	= { 2, 0, 0, 0 },
 		.gpiomute 	= 1,
-		.needs_tvaudio	= 1,
 		.pll		= PLL_28,
 		.tuner_type	= TUNER_PHILIPS_NTSC,
 		.tuner_addr	= ADDR_UNSET,
@@ -2714,7 +2644,6 @@
 		.muxsel         = MUXSEL(2, 3, 1, 1),
 		.gpiomux        = { 0x20001,0x10001, 0, 0 },
 		.gpiomute       = 10,
-		.needs_tvaudio  = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_PHILIPS_PAL_I,
 		.tuner_addr     = ADDR_UNSET,
@@ -2746,7 +2675,6 @@
 		.muxsel         = MUXSEL(2, 3, 1, 1),
 		.gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
 		.gpiomute 	= 3, /* CONTVFMi */
-		.needs_tvaudio  = 0,
 		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
 		.tuner_addr     = ADDR_UNSET,
 		.pll            = PLL_28,
@@ -2785,7 +2713,6 @@
 		.gpiomask       = 0x00,
 		.muxsel         = MUXSEL(0, 2, 3, 1),
 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
-		.needs_tvaudio  = 0,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
@@ -2799,7 +2726,6 @@
 		.gpiomask       = 0x00,
 		.muxsel         = MUXSEL(2, 3, 1),
 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
-		.needs_tvaudio  = 0,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
@@ -2813,7 +2739,6 @@
 		.gpiomask       = 0x00,
 		.muxsel         = MUXSEL(3, 2, 1),
 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
-		.needs_tvaudio  = 0,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_ABSENT,
 		.tuner_addr	= ADDR_UNSET,
@@ -2877,7 +2802,6 @@
 		.gpiomask       = 0,
 		.muxsel         = MUXSEL(2, 3),
 		.gpiomux        = { 0 },
-		.needs_tvaudio  = 0,
 		.no_msp34xx     = 1,
 		.pll            = PLL_28,
 		.tuner_type     = TUNER_ABSENT,
@@ -3649,7 +3573,7 @@
 		struct tuner_setup tun_setup;
 
 		/* Load tuner module before issuing tuner config call! */
-		if (bttv_tvcards[btv->c.type].has_radio)
+		if (btv->has_radio)
 			v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
 				&btv->c.i2c_adap, "tuner",
 				0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
@@ -3664,7 +3588,7 @@
 		tun_setup.type = btv->tuner_type;
 		tun_setup.addr = addr;
 
-		if (bttv_tvcards[btv->c.type].has_radio)
+		if (btv->has_radio)
 			tun_setup.mode_mask |= T_RADIO;
 
 		bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
@@ -3724,6 +3648,10 @@
 			bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
 		btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
 	}
+
+	/* The 61334 needs the msp3410 to do the radio demod to get sound */
+	if (tv.model == 61334)
+		btv->radio_uses_msp_demodulator = 1;
 }
 
 static int terratec_active_radio_upgrade(struct bttv *btv)
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index a9cfb0f..ff7a589 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -1218,6 +1218,11 @@
 		   For now this is sufficient. */
 		switch (input) {
 		case TVAUDIO_INPUT_RADIO:
+			/* Some boards need the msp do to the radio demod */
+			if (btv->radio_uses_msp_demodulator) {
+				in = MSP_INPUT_DEFAULT;
+				break;
+			}
 			in = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1,
 				    MSP_DSP_IN_SCART, MSP_DSP_IN_SCART);
 			break;
diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h
index c517161..acfe2f3 100644
--- a/drivers/media/video/bt8xx/bttv.h
+++ b/drivers/media/video/bt8xx/bttv.h
@@ -236,7 +236,6 @@
 	/* i2c audio flags */
 	unsigned int no_msp34xx:1;
 	unsigned int no_tda7432:1;
-	unsigned int needs_tvaudio:1;
 	unsigned int msp34xx_alt:1;
 	/* Note: currently no card definition needs to mark the presence
 	   of a RDS saa6588 chip. If this is ever needed, then add a new
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index db943a8d..70fd4f23 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -440,6 +440,7 @@
 	/* radio data/state */
 	int has_radio;
 	int radio_user;
+	int radio_uses_msp_demodulator;
 
 	/* miro/pinnacle + Aimslab VHX
 	   philips matchbox (tea5757 radio tuner) support */
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index 2520219..5b75a64 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -607,8 +607,9 @@
 				}
 				o = i * pixels_per_line + pixels_read + k;
 				if (o < len) {
+					u8 ch = invert - buffer[k];
 					got++;
-					put_user((invert - buffer[k]) << shift, buf + o);
+					put_user(ch << shift, buf + o);
 				}
 			}
 			pixels_read += bytes;
@@ -648,8 +649,8 @@
 	struct qcam *qcam = video_drvdata(file);
 
 	strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
-	strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card));
-	strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
+	strlcpy(vcap->card, "Connectix B&W Quickcam", sizeof(vcap->card));
+	strlcpy(vcap->bus_info, qcam->pport->name, sizeof(vcap->bus_info));
 	vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 	vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS;
 	return 0;
@@ -688,8 +689,8 @@
 	pix->height = qcam->height / qcam->transfer_scale;
 	pix->pixelformat = (qcam->bpp == 4) ? V4L2_PIX_FMT_Y4 : V4L2_PIX_FMT_Y6;
 	pix->field = V4L2_FIELD_NONE;
-	pix->bytesperline = qcam->width;
-	pix->sizeimage = qcam->width * qcam->height;
+	pix->bytesperline = pix->width;
+	pix->sizeimage = pix->width * pix->height;
 	/* Just a guess */
 	pix->colorspace = V4L2_COLORSPACE_SRGB;
 	return 0;
@@ -757,7 +758,7 @@
 		  "4-Bit Monochrome", V4L2_PIX_FMT_Y4,
 		  { 0, 0, 0, 0 }
 		},
-		{ 0, 0, 0,
+		{ 1, 0, 0,
 		  "6-Bit Monochrome", V4L2_PIX_FMT_Y6,
 		  { 0, 0, 0, 0 }
 		},
@@ -772,6 +773,25 @@
 	return 0;
 }
 
+static int qcam_enum_framesizes(struct file *file, void *fh,
+					 struct v4l2_frmsizeenum *fsize)
+{
+	static const struct v4l2_frmsize_discrete sizes[] = {
+		{  80,  60 },
+		{ 160, 120 },
+		{ 320, 240 },
+	};
+
+	if (fsize->index > 2)
+		return -EINVAL;
+	if (fsize->pixel_format != V4L2_PIX_FMT_Y4 &&
+	    fsize->pixel_format != V4L2_PIX_FMT_Y6)
+		return -EINVAL;
+	fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+	fsize->discrete = sizes[fsize->index];
+	return 0;
+}
+
 static ssize_t qcam_read(struct file *file, char __user *buf,
 		size_t count, loff_t *ppos)
 {
@@ -795,6 +815,11 @@
 	return len;
 }
 
+static unsigned int qcam_poll(struct file *filp, poll_table *wait)
+{
+	return v4l2_ctrl_poll(filp, wait) | POLLIN | POLLRDNORM;
+}
+
 static int qcam_s_ctrl(struct v4l2_ctrl *ctrl)
 {
 	struct qcam *qcam =
@@ -828,7 +853,7 @@
 	.owner		= THIS_MODULE,
 	.open		= v4l2_fh_open,
 	.release	= v4l2_fh_release,
-	.poll		= v4l2_ctrl_poll,
+	.poll		= qcam_poll,
 	.unlocked_ioctl = video_ioctl2,
 	.read		= qcam_read,
 };
@@ -839,6 +864,7 @@
 	.vidioc_s_input      		    = qcam_s_input,
 	.vidioc_enum_input   		    = qcam_enum_input,
 	.vidioc_enum_fmt_vid_cap 	    = qcam_enum_fmt_vid_cap,
+	.vidioc_enum_framesizes		    = qcam_enum_framesizes,
 	.vidioc_g_fmt_vid_cap 		    = qcam_g_fmt_vid_cap,
 	.vidioc_s_fmt_vid_cap  		    = qcam_s_fmt_vid_cap,
 	.vidioc_try_fmt_vid_cap  	    = qcam_try_fmt_vid_cap,
@@ -864,9 +890,9 @@
 		return NULL;
 
 	v4l2_dev = &qcam->v4l2_dev;
-	strlcpy(v4l2_dev->name, "bw-qcam", sizeof(v4l2_dev->name));
+	snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), "bw-qcam%d", num_cams);
 
-	if (v4l2_device_register(NULL, v4l2_dev) < 0) {
+	if (v4l2_device_register(port->dev, v4l2_dev) < 0) {
 		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
 		kfree(qcam);
 		return NULL;
@@ -886,7 +912,7 @@
 		return NULL;
 	}
 	qcam->pport = port;
-	qcam->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
+	qcam->pdev = parport_register_device(port, v4l2_dev->name, NULL, NULL,
 			NULL, 0, NULL);
 	if (qcam->pdev == NULL) {
 		v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
@@ -975,6 +1001,7 @@
 		return -ENODEV;
 	}
 	qc_calibrate(qcam);
+	v4l2_ctrl_handler_setup(&qcam->hdl);
 
 	parport_release(qcam->pdev);
 
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index b55d57cc..7e5ffd6 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -838,10 +838,10 @@
 	}
 
 	CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, "
-		   "irq: %d, latency: %d, memory: 0x%lx\n",
+		   "irq: %d, latency: %d, memory: 0x%llx\n",
 		   cx->pci_dev->device, cx->card_rev, pci_dev->bus->number,
 		   PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn),
-		   cx->pci_dev->irq, pci_latency, (unsigned long)cx->base_addr);
+		   cx->pci_dev->irq, pci_latency, (u64)cx->base_addr);
 
 	return 0;
 }
@@ -938,7 +938,7 @@
 	if (retval)
 		goto err;
 
-	CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr);
+	CX18_DEBUG_INFO("base addr: 0x%llx\n", (u64)cx->base_addr);
 
 	/* PCI Device Setup */
 	retval = cx18_setup_pci(cx, pci_dev, pci_id);
@@ -946,8 +946,8 @@
 		goto free_workqueues;
 
 	/* map io memory */
-	CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
-		   cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
+	CX18_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+		   (u64)cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
 	cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
 				       CX18_MEM_SIZE);
 	if (!cx->enc_mem) {
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 7a37e0e..2767c64 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -622,7 +622,7 @@
 				   unique ID. Starts at 1, so 0 can be used as
 				   uninitialized value in the stream->id. */
 
-	u32 base_addr;
+	resource_size_t base_addr;
 
 	u8 card_rev;
 	void __iomem *enc_mem, *reg_mem;
diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c
index 1b3fb50..b85c292 100644
--- a/drivers/media/video/cx18/cx18-firmware.c
+++ b/drivers/media/video/cx18/cx18-firmware.c
@@ -164,8 +164,13 @@
 
 	apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32];
 	while (offset + sizeof(seghdr) < fw->size) {
-		/* TODO: byteswapping */
-		memcpy(&seghdr, src + offset / 4, sizeof(seghdr));
+		const u32 *shptr = src + offset / 4;
+
+		seghdr.sync1 = le32_to_cpu(shptr[0]);
+		seghdr.sync2 = le32_to_cpu(shptr[1]);
+		seghdr.addr = le32_to_cpu(shptr[2]);
+		seghdr.size = le32_to_cpu(shptr[3]);
+
 		offset += sizeof(seghdr);
 		if (seghdr.sync1 != APU_ROM_SYNC1 ||
 		    seghdr.sync2 != APU_ROM_SYNC2) {
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index ed81183..eabf00c 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -434,6 +434,7 @@
 {
 	u32 handle, mdl_ack_offset, mdl_ack_count;
 	struct cx18_mailbox *mb;
+	int i;
 
 	mb = &order->mb;
 	handle = mb->args[0];
@@ -447,8 +448,9 @@
 		return -1;
 	}
 
-	cx18_memcpy_fromio(cx, order->mdl_ack, cx->enc_mem + mdl_ack_offset,
-			   sizeof(struct cx18_mdl_ack) * mdl_ack_count);
+	for (i = 0; i < sizeof(struct cx18_mdl_ack) * mdl_ack_count; i += sizeof(u32))
+		((u32 *)order->mdl_ack)[i / sizeof(u32)] =
+			cx18_readl(cx, cx->enc_mem + mdl_ack_offset + i);
 
 	if ((order->flags & CX18_F_EWO_MB_STALE) == 0)
 		mb_ack_irq(cx, order);
@@ -538,6 +540,7 @@
 	struct cx18_mailbox *order_mb;
 	struct cx18_in_work_order *order;
 	int submit;
+	int i;
 
 	switch (rpu) {
 	case CPU:
@@ -562,10 +565,12 @@
 	order_mb = &order->mb;
 
 	/* mb->cmd and mb->args[0] through mb->args[2] */
-	cx18_memcpy_fromio(cx, &order_mb->cmd, &mb->cmd, 4 * sizeof(u32));
+	for (i = 0; i < 4; i++)
+		(&order_mb->cmd)[i] = cx18_readl(cx, &mb->cmd + i);
+
 	/* mb->request and mb->ack.  N.B. we want to read mb->ack last */
-	cx18_memcpy_fromio(cx, &order_mb->request, &mb->request,
-			   2 * sizeof(u32));
+	for (i = 0; i < 2; i++)
+		(&order_mb->request)[i] = cx18_readl(cx, &mb->request + i);
 
 	if (order_mb->request == order_mb->ack) {
 		CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index e46446a..ed7b2aa 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -471,7 +471,7 @@
 	dprintk(1,"Loading firmware ...\n");
 	dataptr = (u32*)firmware->data;
 	for (i = 0; i < (firmware->size >> 2); i++) {
-		value = *dataptr;
+		value = le32_to_cpu(*dataptr);
 		checksum += ~value;
 		memory_write(dev->core, i, value);
 		dataptr++;
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 20a7e24..92da7c2 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -974,6 +974,7 @@
 	[EM2884_BOARD_CINERGY_HTC_STICK] = {
 		.name         = "Terratec Cinergy HTC Stick",
 		.has_dvb      = 1,
+		.ir_codes     = RC_MAP_NEC_TERRATEC_CINERGY_XS,
 #if 0
 		.tuner_type   = TUNER_PHILIPS_TDA8290,
 		.tuner_addr   = 0x41,
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index fce5f76..5e30c4f3 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -527,6 +527,8 @@
 
 	if (dev->board.ir_codes == NULL) {
 		/* No remote control support */
+		em28xx_warn("Remote control support is not available for "
+				"this card.\n");
 		return 0;
 	}
 
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 137166d..31721ea 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1653,7 +1653,7 @@
 				enum v4l2_buf_type buf_type)
 {
 	struct gspca_dev *gspca_dev = video_drvdata(file);
-	int ret;
+	int i, ret;
 
 	if (buf_type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
@@ -1678,6 +1678,8 @@
 	wake_up_interruptible(&gspca_dev->wq);
 
 	/* empty the transfer queues */
+	for (i = 0; i < gspca_dev->nframes; i++)
+		gspca_dev->frame[i].v4l2_buf.flags &= ~BUF_ALL_FLAGS;
 	atomic_set(&gspca_dev->fr_q, 0);
 	atomic_set(&gspca_dev->fr_i, 0);
 	gspca_dev->fr_o = 0;
diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c
index b5acb1e..80c81dd 100644
--- a/drivers/media/video/gspca/ov534.c
+++ b/drivers/media/video/gspca/ov534.c
@@ -96,7 +96,7 @@
 static void setcontrast(struct gspca_dev *gspca_dev);
 static void setgain(struct gspca_dev *gspca_dev);
 static void setexposure(struct gspca_dev *gspca_dev);
-static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val);
+static void setagc(struct gspca_dev *gspca_dev);
 static void setawb(struct gspca_dev *gspca_dev);
 static void setaec(struct gspca_dev *gspca_dev);
 static void setsharpness(struct gspca_dev *gspca_dev);
@@ -189,7 +189,7 @@
 			.step    = 1,
 			.default_value = 1,
 		},
-		.set = sd_setagc
+		.set_control = setagc
 	},
 [AWB] = {
 		{
@@ -851,6 +851,7 @@
 	int i;
 
 	for (i = 0; i < 5; i++) {
+		msleep(10);
 		data = ov534_reg_read(gspca_dev, OV534_REG_STATUS);
 
 		switch (data) {
@@ -1242,10 +1243,6 @@
 
 	cam->ctrls = sd->ctrls;
 
-	/* the auto white balance control works only when auto gain is set */
-	if (sd_ctrls[AGC].qctrl.default_value == 0)
-		gspca_dev->ctrl_inac |= (1 << AWB);
-
 	cam->cam_mode = ov772x_mode;
 	cam->nmodes = ARRAY_SIZE(ov772x_mode);
 
@@ -1486,29 +1483,6 @@
 	} while (remaining_len > 0);
 }
 
-static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->ctrls[AGC].val = val;
-
-	/* the auto white balance control works only
-	 * when auto gain is set */
-	if (val) {
-		gspca_dev->ctrl_inac &= ~(1 << AWB);
-	} else {
-		gspca_dev->ctrl_inac |= (1 << AWB);
-		if (sd->ctrls[AWB].val) {
-			sd->ctrls[AWB].val = 0;
-			if (gspca_dev->streaming)
-				setawb(gspca_dev);
-		}
-	}
-	if (gspca_dev->streaming)
-		setagc(gspca_dev);
-	return gspca_dev->usb_err;
-}
-
 static int sd_querymenu(struct gspca_dev *gspca_dev,
 		struct v4l2_querymenu *menu)
 {
diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/video/gspca/ov534_9.c
index b579730..1fd41f0 100644
--- a/drivers/media/video/gspca/ov534_9.c
+++ b/drivers/media/video/gspca/ov534_9.c
@@ -1008,6 +1008,7 @@
 	int i;
 
 	for (i = 0; i < 5; i++) {
+		msleep(10);
 		data = reg_r(gspca_dev, OV534_REG_STATUS);
 
 		switch (data) {
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 2cb7d95..115da16 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -418,7 +418,7 @@
 	struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler;
 
 	gspca_dev->vdev.ctrl_handler = hdl;
-	v4l2_ctrl_handler_init(hdl, 4);
+	v4l2_ctrl_handler_init(hdl, 5);
 
 	sd->contrast = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
 					V4L2_CID_CONTRAST, 0, 15, 1, 7);
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index ad09820..6c31e46 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -1761,7 +1761,6 @@
 			V4L2_CID_SATURATION, 0, 255, 1, 127);
 	sd->hue = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
 			V4L2_CID_HUE, -180, 180, 1, 0);
-	v4l2_ctrl_cluster(4, &sd->brightness);
 
 	sd->gamma = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
 			V4L2_CID_GAMMA, 0, 255, 1, 0x10);
@@ -1770,7 +1769,6 @@
 			V4L2_CID_BLUE_BALANCE, 0, 127, 1, 0x28);
 	sd->red = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
 			V4L2_CID_RED_BALANCE, 0, 127, 1, 0x28);
-	v4l2_ctrl_cluster(2, &sd->blue);
 
 	if (sd->sensor != SENSOR_OV9655 && sd->sensor != SENSOR_SOI968 &&
 	    sd->sensor != SENSOR_OV7670 && sd->sensor != SENSOR_MT9M001 &&
@@ -1779,7 +1777,6 @@
 			V4L2_CID_HFLIP, 0, 1, 1, 0);
 		sd->vflip = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
 			V4L2_CID_VFLIP, 0, 1, 1, 0);
-		v4l2_ctrl_cluster(2, &sd->hflip);
 	}
 
 	if (sd->sensor != SENSOR_SOI968 && sd->sensor != SENSOR_MT9VPRB &&
@@ -1794,6 +1791,20 @@
 			V4L2_CID_GAIN, 0, 28, 1, 0);
 		sd->autogain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
 			V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+	}
+
+	sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
+			V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80);
+	if (hdl->error) {
+		pr_err("Could not initialize controls\n");
+		return hdl->error;
+	}
+
+	v4l2_ctrl_cluster(4, &sd->brightness);
+	v4l2_ctrl_cluster(2, &sd->blue);
+	if (sd->hflip)
+		v4l2_ctrl_cluster(2, &sd->hflip);
+	if (sd->autogain) {
 		if (sd->sensor == SENSOR_SOI968)
 			/* this sensor doesn't have the exposure control and
 			   autogain is clustered with gain instead. This works
@@ -1803,13 +1814,6 @@
 			/* Otherwise autogain is clustered with exposure. */
 			v4l2_ctrl_auto_cluster(2, &sd->autogain, 0, false);
 	}
-
-	sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
-			V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80);
-	if (hdl->error) {
-		pr_err("Could not initialize controls\n");
-		return hdl->error;
-	}
 	return 0;
 }
 
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 4d1696d..f38faa9 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -3120,7 +3120,7 @@
 			| (SENSOR_ ## sensor << 8) \
 			| (flags)
 static const struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)},
+	{USB_DEVICE(0x0458, 0x7025), BSF(SN9C120, MI0360B, F_PDN_INV)},
 	{USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)},
 	{USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, F_PDN_INV)},
 	{USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, F_PDN_INV)},
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 057929e..5462ce2 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -866,10 +866,10 @@
 	pci_write_config_dword(pdev, 0x40, 0xffff);
 
 	IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
-		   "irq: %d, latency: %d, memory: 0x%lx\n",
+		   "irq: %d, latency: %d, memory: 0x%llx\n",
 		   pdev->device, pdev->revision, pdev->bus->number,
 		   PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
-		   pdev->irq, pci_latency, (unsigned long)itv->base_addr);
+		   pdev->irq, pci_latency, (u64)itv->base_addr);
 
 	return 0;
 }
@@ -1007,7 +1007,7 @@
 	itv->cxhdl.priv = itv;
 	itv->cxhdl.func = ivtv_api_func;
 
-	IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr);
+	IVTV_DEBUG_INFO("base addr: 0x%llx\n", (u64)itv->base_addr);
 
 	/* PCI Device Setup */
 	retval = ivtv_setup_pci(itv, pdev, pci_id);
@@ -1017,8 +1017,8 @@
 		goto free_mem;
 
 	/* map io memory */
-	IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
-		   itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE);
+	IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+		   (u64)itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE);
 	itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET,
 				       IVTV_ENCODER_SIZE);
 	if (!itv->enc_mem) {
@@ -1034,8 +1034,8 @@
 	}
 
 	if (itv->has_cx23415) {
-		IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
-				itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
+		IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+				(u64)itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
 		itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET,
 				IVTV_DECODER_SIZE);
 		if (!itv->dec_mem) {
@@ -1056,8 +1056,8 @@
 	}
 
 	/* map registers memory */
-	IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
-		   itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
+	IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+		   (u64)itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
 	itv->reg_mem =
 	    ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
 	if (!itv->reg_mem) {
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index 2e22002..a7e00f8 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -622,7 +622,7 @@
 	struct v4l2_subdev *sd_video;	/* controlling video decoder subdev */
 	struct v4l2_subdev *sd_audio;	/* controlling audio subdev */
 	struct v4l2_subdev *sd_muxer;	/* controlling audio muxer subdev */
-	u32 base_addr;                  /* PCI resource base address */
+	resource_size_t base_addr;      /* PCI resource base address */
 	volatile void __iomem *enc_mem; /* pointer to mapped encoder memory */
 	volatile void __iomem *dec_mem; /* pointer to mapped decoder memory */
 	volatile void __iomem *reg_mem; /* pointer to mapped registers */
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index d2dec58..3945556 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -110,22 +110,6 @@
 	V4L2_M2M_DST = 1,
 };
 
-/* Source and destination queue data */
-static struct m2mtest_q_data q_data[2];
-
-static struct m2mtest_q_data *get_q_data(enum v4l2_buf_type type)
-{
-	switch (type) {
-	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		return &q_data[V4L2_M2M_SRC];
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		return &q_data[V4L2_M2M_DST];
-	default:
-		BUG();
-	}
-	return NULL;
-}
-
 #define V4L2_CID_TRANS_TIME_MSEC	V4L2_CID_PRIVATE_BASE
 #define V4L2_CID_TRANS_NUM_BUFS		(V4L2_CID_PRIVATE_BASE + 1)
 
@@ -198,8 +182,26 @@
 	int			aborting;
 
 	struct v4l2_m2m_ctx	*m2m_ctx;
+
+	/* Source and destination queue data */
+	struct m2mtest_q_data   q_data[2];
 };
 
+static struct m2mtest_q_data *get_q_data(struct m2mtest_ctx *ctx,
+					 enum v4l2_buf_type type)
+{
+	switch (type) {
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+		return &ctx->q_data[V4L2_M2M_SRC];
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		return &ctx->q_data[V4L2_M2M_DST];
+	default:
+		BUG();
+	}
+	return NULL;
+}
+
+
 static struct v4l2_queryctrl *get_ctrl(int id)
 {
 	int i;
@@ -223,7 +225,7 @@
 	int tile_w, bytes_left;
 	int width, height, bytesperline;
 
-	q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_OUTPUT);
+	q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
 
 	width	= q_data->width;
 	height	= q_data->height;
@@ -436,7 +438,7 @@
 	if (!vq)
 		return -EINVAL;
 
-	q_data = get_q_data(f->type);
+	q_data = get_q_data(ctx, f->type);
 
 	f->fmt.pix.width	= q_data->width;
 	f->fmt.pix.height	= q_data->height;
@@ -535,7 +537,7 @@
 	if (!vq)
 		return -EINVAL;
 
-	q_data = get_q_data(f->type);
+	q_data = get_q_data(ctx, f->type);
 	if (!q_data)
 		return -EINVAL;
 
@@ -747,7 +749,7 @@
 	struct m2mtest_q_data *q_data;
 	unsigned int size, count = *nbuffers;
 
-	q_data = get_q_data(vq->type);
+	q_data = get_q_data(ctx, vq->type);
 
 	size = q_data->width * q_data->height * q_data->fmt->depth >> 3;
 
@@ -775,7 +777,7 @@
 
 	dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type);
 
-	q_data = get_q_data(vb->vb2_queue->type);
+	q_data = get_q_data(ctx, vb->vb2_queue->type);
 
 	if (vb2_plane_size(vb, 0) < q_data->sizeimage) {
 		dprintk(ctx->dev, "%s data will not fit into plane (%lu < %lu)\n",
@@ -860,6 +862,9 @@
 	ctx->transtime = MEM2MEM_DEF_TRANSTIME;
 	ctx->num_processed = 0;
 
+	ctx->q_data[V4L2_M2M_SRC].fmt = &formats[0];
+	ctx->q_data[V4L2_M2M_DST].fmt = &formats[0];
+
 	ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init);
 
 	if (IS_ERR(ctx->m2m_ctx)) {
@@ -986,9 +991,6 @@
 		goto err_m2m;
 	}
 
-	q_data[V4L2_M2M_SRC].fmt = &formats[0];
-	q_data[V4L2_M2M_DST].fmt = &formats[0];
-
 	return 0;
 
 	v4l2_m2m_release(dev->m2m_dev);
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index ded26b7..41f9a25 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -345,19 +345,6 @@
 					PRP_INTR_CH2OVF,
 		}
 	},
-	{
-		.in_fmt		= V4L2_MBUS_FMT_UYVY8_2X8,
-		.out_fmt	= V4L2_PIX_FMT_YUV420,
-		.cfg		= {
-			.channel	= 2,
-			.in_fmt		= PRP_CNTL_DATA_IN_YUV422,
-			.out_fmt	= PRP_CNTL_CH2_OUT_YUV420,
-			.src_pixel	= 0x22000888, /* YUV422 (YUYV) */
-			.irq_flags	= PRP_INTR_RDERR | PRP_INTR_CH2WERR |
-					PRP_INTR_CH2FC | PRP_INTR_LBOVF |
-					PRP_INTR_CH2OVF,
-		}
-	},
 };
 
 static struct mx2_fmt_cfg *mx27_emma_prp_get_format(
@@ -984,7 +971,6 @@
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
-	const struct soc_camera_format_xlate *xlate;
 	unsigned long common_flags;
 	int ret;
 	int bytesperline;
@@ -1029,31 +1015,14 @@
 		return ret;
 	}
 
-	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
-	if (!xlate) {
-		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
-		return -EINVAL;
-	}
-
-	if (xlate->code == V4L2_MBUS_FMT_YUYV8_2X8) {
-		csicr1 |= CSICR1_PACK_DIR;
-		csicr1 &= ~CSICR1_SWAP16_EN;
-		dev_dbg(icd->parent, "already yuyv format, don't convert\n");
-	} else if (xlate->code == V4L2_MBUS_FMT_UYVY8_2X8) {
-		csicr1 &= ~CSICR1_PACK_DIR;
-		csicr1 |= CSICR1_SWAP16_EN;
-		dev_dbg(icd->parent, "convert uyvy mbus format into yuyv\n");
-	} else {
-		dev_warn(icd->parent, "mbus format not supported\n");
-		return -EINVAL;
-	}
-
 	if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
 		csicr1 |= CSICR1_REDGE;
 	if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
 		csicr1 |= CSICR1_SOF_POL;
 	if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
 		csicr1 |= CSICR1_HSYNC_POL;
+	if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
+		csicr1 |= CSICR1_SWAP16_EN;
 	if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC)
 		csicr1 |= CSICR1_EXT_VSYNC;
 	if (pcdev->platform_flags & MX2_CAMERA_CCIR)
@@ -1064,6 +1033,8 @@
 		csicr1 |= CSICR1_GCLK_MODE;
 	if (pcdev->platform_flags & MX2_CAMERA_INV_DATA)
 		csicr1 |= CSICR1_INV_DATA;
+	if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB)
+		csicr1 |= CSICR1_PACK_DIR;
 
 	pcdev->csicr1 = csicr1;
 
@@ -1138,8 +1109,7 @@
 		return 0;
 	}
 
-	if (code == V4L2_MBUS_FMT_YUYV8_2X8 ||
-	    code == V4L2_MBUS_FMT_UYVY8_2X8) {
+	if (code == V4L2_MBUS_FMT_YUYV8_2X8) {
 		formats++;
 		if (xlate) {
 			/*
@@ -1155,18 +1125,6 @@
 		}
 	}
 
-	if (code == V4L2_MBUS_FMT_UYVY8_2X8) {
-		formats++;
-		if (xlate) {
-			xlate->host_fmt =
-				soc_mbus_get_fmtdesc(V4L2_MBUS_FMT_YUYV8_2X8);
-			xlate->code	= code;
-			dev_dbg(dev, "Providing host format %s for sensor code %d\n",
-				xlate->host_fmt->name, code);
-			xlate++;
-		}
-	}
-
 	/* Generic pass-trough */
 	formats++;
 	if (xlate) {
diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index af2d908..c370c2d 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -29,6 +29,7 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/mutex.h>
+#include <linux/slab.h>
 #include <linux/uaccess.h>
 #include <linux/isa.h>
 #include <asm/io.h>
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index fedcd56..92fc5a2 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -615,7 +615,7 @@
 	ctx->effect.type = FIMC_REG_CIIMGEFF_FIN_BYPASS;
 
 	if (!handler->error) {
-		v4l2_ctrl_cluster(3, &ctrls->colorfx);
+		v4l2_ctrl_cluster(2, &ctrls->colorfx);
 		ctrls->ready = true;
 	}
 
diff --git a/drivers/media/video/s5p-mfc/regs-mfc.h b/drivers/media/video/s5p-mfc/regs-mfc.h
index 053a8a8..a19bece 100644
--- a/drivers/media/video/s5p-mfc/regs-mfc.h
+++ b/drivers/media/video/s5p-mfc/regs-mfc.h
@@ -164,10 +164,15 @@
 								decoded pic */
 #define S5P_FIMV_SI_DISPLAY_Y_ADR	0x2010 /* luma addr of displayed pic */
 #define S5P_FIMV_SI_DISPLAY_C_ADR	0x2014 /* chroma addrof displayed pic */
+
 #define S5P_FIMV_SI_CONSUMED_BYTES	0x2018 /* Consumed number of bytes to
 							decode a frame */
 #define S5P_FIMV_SI_DISPLAY_STATUS	0x201c /* status of decoded picture */
 
+#define S5P_FIMV_SI_DECODE_Y_ADR	0x2024 /* luma addr of decoded pic */
+#define S5P_FIMV_SI_DECODE_C_ADR	0x2028 /* chroma addrof decoded pic */
+#define S5P_FIMV_SI_DECODE_STATUS	0x202c /* status of decoded picture */
+
 #define S5P_FIMV_SI_CH0_SB_ST_ADR	0x2044 /* start addr of stream buf */
 #define S5P_FIMV_SI_CH0_SB_FRM_SIZE	0x2048 /* size of stream buf */
 #define S5P_FIMV_SI_CH0_DESC_ADR	0x204c /* addr of descriptor buf */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
index c25ec02..4dd32fc 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
@@ -627,13 +627,13 @@
 
 	switch (ctrl->id) {
 	case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY:
-		ctx->loop_filter_mpeg4 = ctrl->val;
+		ctx->display_delay = ctrl->val;
 		break;
 	case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE:
 		ctx->display_delay_enable = ctrl->val;
 		break;
 	case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:
-		ctx->display_delay = ctrl->val;
+		ctx->loop_filter_mpeg4 = ctrl->val;
 		break;
 	case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:
 		ctx->slice_interface = ctrl->val;
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
index acedb20..03d8334 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
@@ -243,12 +243,6 @@
 		.minimum = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
 		.maximum = V4L2_MPEG_VIDEO_H264_LEVEL_4_0,
 		.default_value = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
-		.menu_skip_mask = ~(
-				(1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_1) |
-				(1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_2) |
-				(1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_0) |
-				(1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_1)
-				),
 	},
 	{
 		.id = V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL,
@@ -494,7 +488,7 @@
 		.type = V4L2_CTRL_TYPE_MENU,
 		.minimum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED,
 		.maximum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED,
-		.default_value = 0,
+		.default_value = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED,
 		.menu_skip_mask = 0,
 	},
 	{
@@ -534,7 +528,7 @@
 		.type = V4L2_CTRL_TYPE_MENU,
 		.minimum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
 		.maximum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE,
-		.default_value = 0,
+		.default_value = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
 		.menu_skip_mask = 0,
 	},
 	{
@@ -907,6 +901,8 @@
 			mfc_err("failed to try output format\n");
 			return -EINVAL;
 		}
+		v4l_bound_align_image(&pix_fmt_mp->width, 8, 1920, 1,
+			&pix_fmt_mp->height, 4, 1080, 1, 0);
 	} else {
 		mfc_err("invalid buf type\n");
 		return -EINVAL;
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_opr.h b/drivers/media/video/s5p-mfc/s5p_mfc_opr.h
index db83836..5932d1c 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_opr.h
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_opr.h
@@ -57,10 +57,12 @@
 					S5P_FIMV_SI_DISPLAY_Y_ADR) << \
 					MFC_OFFSET_SHIFT)
 #define s5p_mfc_get_dec_y_adr()		(readl(dev->regs_base + \
-					S5P_FIMV_SI_DISPLAY_Y_ADR) << \
+					S5P_FIMV_SI_DECODE_Y_ADR) << \
 					MFC_OFFSET_SHIFT)
 #define s5p_mfc_get_dspl_status()	readl(dev->regs_base + \
 						S5P_FIMV_SI_DISPLAY_STATUS)
+#define s5p_mfc_get_dec_status()	readl(dev->regs_base + \
+						S5P_FIMV_SI_DECODE_STATUS)
 #define s5p_mfc_get_frame_type()	(readl(dev->regs_base + \
 						S5P_FIMV_DECODE_FRAME_TYPE) \
 					& S5P_FIMV_DECODE_FRAME_MASK)
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_shm.h b/drivers/media/video/s5p-mfc/s5p_mfc_shm.h
index 764eac6..cf962a4 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_shm.h
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_shm.h
@@ -13,8 +13,7 @@
 #ifndef S5P_MFC_SHM_H_
 #define S5P_MFC_SHM_H_
 
-enum MFC_SHM_OFS
-{
+enum MFC_SHM_OFS {
 	EXTENEDED_DECODE_STATUS	= 0x00,	/* D */
 	SET_FRAME_TAG		= 0x04, /* D */
 	GET_FRAME_TAG_TOP	= 0x08, /* D */
diff --git a/drivers/media/video/smiapp/Kconfig b/drivers/media/video/smiapp/Kconfig
index f7b35ff..fb99ff1 100644
--- a/drivers/media/video/smiapp/Kconfig
+++ b/drivers/media/video/smiapp/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_SMIAPP
 	tristate "SMIA++/SMIA sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK
 	select VIDEO_SMIAPP_PLL
 	---help---
 	  This is a generic driver for SMIA++/SMIA camera modules.
diff --git a/drivers/media/video/smiapp/smiapp-core.c b/drivers/media/video/smiapp/smiapp-core.c
index f518026..e8c93c8 100644
--- a/drivers/media/video/smiapp/smiapp-core.c
+++ b/drivers/media/video/smiapp/smiapp-core.c
@@ -32,6 +32,7 @@
 #include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/regulator/consumer.h>
+#include <linux/slab.h>
 #include <linux/v4l2-mediabus.h>
 #include <media/v4l2-device.h>
 
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 3e050e1..1ad5ab6 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -1178,7 +1178,7 @@
 		return 0;
 	if (vt->type == t->mode && analog_ops->get_afc)
 		vt->afc = analog_ops->get_afc(&t->fe);
-	if (t->mode != V4L2_TUNER_RADIO) {
+	if (vt->type != V4L2_TUNER_RADIO) {
 		vt->capability |= V4L2_TUNER_CAP_NORM;
 		vt->rangelow = tv_range[0] * 16;
 		vt->rangehigh = tv_range[1] * 16;
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 5ccbd46..83dbb2d 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -656,7 +656,7 @@
 	SET_VALID_IOCTL(ops, VIDIOC_TRY_ENCODER_CMD, vidioc_try_encoder_cmd);
 	SET_VALID_IOCTL(ops, VIDIOC_DECODER_CMD, vidioc_decoder_cmd);
 	SET_VALID_IOCTL(ops, VIDIOC_TRY_DECODER_CMD, vidioc_try_decoder_cmd);
-	if (ops->vidioc_g_parm || vdev->current_norm)
+	if (ops->vidioc_g_parm || vdev->vfl_type == VFL_TYPE_GRABBER)
 		set_bit(_IOC_NR(VIDIOC_G_PARM), valid_ioctls);
 	SET_VALID_IOCTL(ops, VIDIOC_S_PARM, vidioc_s_parm);
 	SET_VALID_IOCTL(ops, VIDIOC_G_TUNER, vidioc_g_tuner);
@@ -679,6 +679,8 @@
 	SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_PRESET, vidioc_query_dv_preset);
 	SET_VALID_IOCTL(ops, VIDIOC_S_DV_TIMINGS, vidioc_s_dv_timings);
 	SET_VALID_IOCTL(ops, VIDIOC_G_DV_TIMINGS, vidioc_g_dv_timings);
+	SET_VALID_IOCTL(ops, VIDIOC_ENUM_DV_TIMINGS, vidioc_enum_dv_timings);
+	SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_TIMINGS, vidioc_query_dv_timings);
 	/* yes, really vidioc_subscribe_event */
 	SET_VALID_IOCTL(ops, VIDIOC_DQEVENT, vidioc_subscribe_event);
 	SET_VALID_IOCTL(ops, VIDIOC_SUBSCRIBE_EVENT, vidioc_subscribe_event);
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 91be4e8..d7fa896 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -1680,6 +1680,7 @@
 				break;
 
 			ret = 0;
+			p->parm.capture.readbuffers = 2;
 			if (ops->vidioc_g_std)
 				ret = ops->vidioc_g_std(file, fh, &std);
 			if (ret == 0)
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index 4d7391e..aae1720 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -2561,7 +2561,7 @@
 	} else if (vino_drvdata->decoder
 		   && (vino_drvdata->decoder_owner == VINO_NO_CHANNEL)) {
 		int input;
-		int data_norm;
+		int data_norm = 0;
 		v4l2_std_id norm;
 
 		input = VINO_INPUT_COMPOSITE;
@@ -2651,7 +2651,7 @@
 		}
 
 		if (vino_drvdata->decoder_owner == vcs->channel) {
-			int data_norm;
+			int data_norm = 0;
 			v4l2_std_id norm;
 
 			ret = decoder_call(video, s_routing,
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 0960d7f..08c1024 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -1149,10 +1149,14 @@
 vivi_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
 {
 	struct vivi_dev *dev = video_drvdata(file);
+	int err;
 
 	dprintk(dev, 1, "read called\n");
-	return vb2_read(&dev->vb_vidq, data, count, ppos,
+	mutex_lock(&dev->mutex);
+	err = vb2_read(&dev->vb_vidq, data, count, ppos,
 		       file->f_flags & O_NONBLOCK);
+	mutex_unlock(&dev->mutex);
+	return err;
 }
 
 static unsigned int
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index 373f423..947a06a 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -6,7 +6,7 @@
  *
  * License Terms: GNU General Public License, version 2
  * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
  */
 
 #include <linux/i2c.h>
diff --git a/drivers/mfd/stmpe-spi.c b/drivers/mfd/stmpe-spi.c
index afd4590..9edfe86 100644
--- a/drivers/mfd/stmpe-spi.c
+++ b/drivers/mfd/stmpe-spi.c
@@ -4,7 +4,7 @@
  * Copyright (C) ST Microelectronics SA 2011
  *
  * License Terms: GNU General Public License, version 2
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
  */
 
 #include <linux/spi/spi.h>
@@ -146,4 +146,4 @@
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("STMPE MFD SPI Interface Driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index 93936f1..23f5463 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -835,7 +835,7 @@
 			struct mei_cl *cl,
 			struct mei_io_list *cmpl_list)
 {
-	if ((*slots * sizeof(u32)) >= (sizeof(struct mei_msg_hdr) +
+	if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) +
 			sizeof(struct hbm_flow_control))) {
 		/* return the cancel routine */
 		list_del(&cb_pos->cb_list);
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index c703332..7de1389 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -982,7 +982,7 @@
 		err = request_threaded_irq(pdev->irq,
 			NULL,
 			mei_interrupt_thread_handler,
-			0, mei_driver_name, dev);
+			IRQF_ONESHOT, mei_driver_name, dev);
 	else
 		err = request_threaded_irq(pdev->irq,
 			mei_interrupt_quick_handler,
@@ -992,7 +992,7 @@
 	if (err) {
 		dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n",
 		       pdev->irq);
-		goto unmap_memory;
+		goto disable_msi;
 	}
 	INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
 	if (mei_hw_init(dev)) {
@@ -1023,8 +1023,8 @@
 	mei_disable_interrupts(dev);
 	flush_scheduled_work();
 	free_irq(pdev->irq, dev);
+disable_msi:
 	pci_disable_msi(pdev);
-unmap_memory:
 	pci_iounmap(pdev, dev->mem_addr);
 free_device:
 	kfree(dev);
@@ -1101,6 +1101,8 @@
 
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
+
+	misc_deregister(&mei_misc_device);
 }
 #ifdef CONFIG_PM
 static int mei_pci_suspend(struct device *device)
@@ -1216,7 +1218,6 @@
  */
 static void __exit mei_exit_module(void)
 {
-	misc_deregister(&mei_misc_device);
 	pci_unregister_driver(&mei_driver);
 
 	pr_debug("unloaded successfully.\n");
diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c
index 6be5605..e2ec050 100644
--- a/drivers/misc/mei/wd.c
+++ b/drivers/misc/mei/wd.c
@@ -341,7 +341,7 @@
 };
 static const struct watchdog_info wd_info = {
 		.identity = INTEL_AMT_WATCHDOG_ID,
-		.options = WDIOF_KEEPALIVEPING,
+		.options = WDIOF_KEEPALIVEPING | WDIOF_ALARMONLY,
 };
 
 static struct watchdog_device amt_wd_dev = {
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index dd2d374..276d21c 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -554,7 +554,6 @@
 	struct mmc_request mrq = {NULL};
 	struct mmc_command cmd = {0};
 	struct mmc_data data = {0};
-	unsigned int timeout_us;
 
 	struct scatterlist sg;
 
@@ -574,23 +573,12 @@
 	cmd.arg = 0;
 	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
 
-	data.timeout_ns = card->csd.tacc_ns * 100;
-	data.timeout_clks = card->csd.tacc_clks * 100;
-
-	timeout_us = data.timeout_ns / 1000;
-	timeout_us += data.timeout_clks * 1000 /
-		(card->host->ios.clock / 1000);
-
-	if (timeout_us > 100000) {
-		data.timeout_ns = 100000000;
-		data.timeout_clks = 0;
-	}
-
 	data.blksz = 4;
 	data.blocks = 1;
 	data.flags = MMC_DATA_READ;
 	data.sg = &sg;
 	data.sg_len = 1;
+	mmc_set_data_timeout(&data, card);
 
 	mrq.cmd = &cmd;
 	mrq.data = &data;
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 2d4a4b7..258b203 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1326,7 +1326,7 @@
 		if (!err)
 			mmc_card_set_sleep(host->card);
 	} else if (!mmc_host_is_spi(host))
-		mmc_deselect_cards(host);
+		err = mmc_deselect_cards(host);
 	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
 	mmc_release_host(host);
 
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index c272c686..b2b43f6 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -1075,16 +1075,18 @@
  */
 static int mmc_sd_suspend(struct mmc_host *host)
 {
+	int err = 0;
+
 	BUG_ON(!host);
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
 	if (!mmc_host_is_spi(host))
-		mmc_deselect_cards(host);
+		err = mmc_deselect_cards(host);
 	host->card->state &= ~MMC_STATE_HIGHSPEED;
 	mmc_release_host(host);
 
-	return 0;
+	return err;
 }
 
 /*
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 13d0e95..41c5fd8 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -218,6 +218,12 @@
 	if (ret)
 		return ret;
 
+	if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED)
+		pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
+			   mmc_hostname(card->host), ctrl);
+
+	/* set as 4-bit bus width */
+	ctrl &= ~SDIO_BUS_WIDTH_MASK;
 	ctrl |= SDIO_BUS_WIDTH_4BIT;
 
 	ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index 787aba1..ab56f7d 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -140,4 +140,18 @@
 #define atmci_writel(port,reg,value)			\
 	__raw_writel((value), (port)->regs + reg)
 
+/*
+ * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
+ * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
+ *
+ * This can be done by finding most significant bit set.
+ */
+static inline unsigned int atmci_convert_chksize(unsigned int maxburst)
+{
+	if (maxburst > 1)
+		return fls(maxburst) - 2;
+	else
+		return 0;
+}
+
 #endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 420aca6..f2c115e 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -910,6 +910,7 @@
 	enum dma_data_direction		direction;
 	enum dma_transfer_direction	slave_dirn;
 	unsigned int			sglen;
+	u32				maxburst;
 	u32 iflags;
 
 	data->error = -EINPROGRESS;
@@ -943,17 +944,18 @@
 	if (!chan)
 		return -ENODEV;
 
-	if (host->caps.has_dma)
-		atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN);
-
 	if (data->flags & MMC_DATA_READ) {
 		direction = DMA_FROM_DEVICE;
 		host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
+		maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst);
 	} else {
 		direction = DMA_TO_DEVICE;
 		host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
+		maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst);
 	}
 
+	atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | ATMCI_DMAEN);
+
 	sglen = dma_map_sg(chan->device->dev, data->sg,
 			data->sg_len, direction);
 
@@ -2314,6 +2316,8 @@
 
 	platform_set_drvdata(pdev, host);
 
+	setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
+
 	/* We need at least one slot to succeed */
 	nr_slots = 0;
 	ret = -ENODEV;
@@ -2352,8 +2356,6 @@
 		}
 	}
 
-	setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
-
 	dev_info(&pdev->dev,
 			"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
 			host->mapbase, irq, nr_slots);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 9bbf45f..1ca5e72 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -418,6 +418,8 @@
 	p->des3 = host->sg_dma;
 	p->des0 = IDMAC_DES0_ER;
 
+	mci_writel(host, BMOD, SDMMC_IDMAC_SWRESET);
+
 	/* Mask out interrupts - get Tx & Rx complete only */
 	mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI |
 		   SDMMC_IDMAC_INT_TI);
@@ -615,14 +617,15 @@
 	u32 div;
 
 	if (slot->clock != host->current_speed) {
-		if (host->bus_hz % slot->clock)
+		div = host->bus_hz / slot->clock;
+		if (host->bus_hz % slot->clock && host->bus_hz > slot->clock)
 			/*
 			 * move the + 1 after the divide to prevent
 			 * over-clocking the card.
 			 */
-			div = ((host->bus_hz / slot->clock) >> 1) + 1;
-		else
-			div = (host->bus_hz  / slot->clock) >> 1;
+			div += 1;
+
+		div = (host->bus_hz != slot->clock) ? DIV_ROUND_UP(div, 2) : 0;
 
 		dev_info(&slot->mmc->class_dev,
 			 "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ"
@@ -939,8 +942,8 @@
 			mdelay(20);
 
 		if (cmd->data) {
-			host->data = NULL;
 			dw_mci_stop_dma(host);
+			host->data = NULL;
 		}
 	}
 }
@@ -1623,7 +1626,6 @@
 	if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
 		mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
 		mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
-		set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
 		host->dma_ops->complete(host);
 	}
 #endif
@@ -1725,7 +1727,8 @@
 
 #ifdef CONFIG_MMC_DW_IDMAC
 				ctrl = mci_readl(host, BMOD);
-				ctrl |= 0x01; /* Software reset of DMA */
+				/* Software reset of DMA */
+				ctrl |= SDMMC_IDMAC_SWRESET;
 				mci_writel(host, BMOD, ctrl);
 #endif
 
@@ -1950,10 +1953,6 @@
 	spin_lock_init(&host->lock);
 	INIT_LIST_HEAD(&host->queue);
 
-
-	host->dma_ops = host->pdata->dma_ops;
-	dw_mci_init_dma(host);
-
 	/*
 	 * Get the host data width - this assumes that HCON has been set with
 	 * the correct values.
@@ -1981,10 +1980,11 @@
 	}
 
 	/* Reset all blocks */
-	if (!mci_wait_reset(&host->dev, host)) {
-		ret = -ENODEV;
-		goto err_dmaunmap;
-	}
+	if (!mci_wait_reset(&host->dev, host))
+		return -ENODEV;
+
+	host->dma_ops = host->pdata->dma_ops;
+	dw_mci_init_dma(host);
 
 	/* Clear the interrupts for the host controller */
 	mci_writel(host, RINTSTS, 0xFFFFFFFF);
@@ -2170,14 +2170,14 @@
 	if (host->vmmc)
 		regulator_enable(host->vmmc);
 
-	if (host->dma_ops->init)
-		host->dma_ops->init(host);
-
 	if (!mci_wait_reset(&host->dev, host)) {
 		ret = -ENODEV;
 		return ret;
 	}
 
+	if (host->dma_ops->init)
+		host->dma_ops->init(host);
+
 	/* Restore the old value at FIFOTH register */
 	mci_writel(host, FIFOTH, host->fifoth_val);
 
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index f0fcce4..50ff19a 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1216,12 +1216,7 @@
 	int bus_width = 0;
 
 	pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
-	if (!pdata->gpio_wp)
-		pdata->gpio_wp = -1;
-
 	pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0);
-	if (!pdata->gpio_cd)
-		pdata->gpio_cd = -1;
 
 	if (of_get_property(np, "cd-inverted", NULL))
 		pdata->cd_invert = true;
@@ -1276,6 +1271,12 @@
 		return -EINVAL;
 	}
 
+	if (!plat) {
+		plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL);
+		if (!plat)
+			return -ENOMEM;
+	}
+
 	if (np)
 		mmci_dt_populate_generic_pdata(np, plat);
 
@@ -1424,6 +1425,10 @@
 	writel(0, host->base + MMCIMASK1);
 	writel(0xfff, host->base + MMCICLEAR);
 
+	if (plat->gpio_cd == -EPROBE_DEFER) {
+		ret = -EPROBE_DEFER;
+		goto err_gpio_cd;
+	}
 	if (gpio_is_valid(plat->gpio_cd)) {
 		ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
 		if (ret == 0)
@@ -1447,6 +1452,10 @@
 		if (ret >= 0)
 			host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
 	}
+	if (plat->gpio_wp == -EPROBE_DEFER) {
+		ret = -EPROBE_DEFER;
+		goto err_gpio_wp;
+	}
 	if (gpio_is_valid(plat->gpio_wp)) {
 		ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
 		if (ret == 0)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 34a9026..277161d 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -894,8 +894,8 @@
 		.owner	= THIS_MODULE,
 #ifdef CONFIG_PM
 		.pm	= &mxs_mmc_pm_ops,
-		.of_match_table = mxs_mmc_dt_ids,
 #endif
+		.of_match_table = mxs_mmc_dt_ids,
 	},
 };
 
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 552196c..3e8dcf8 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1300,7 +1300,7 @@
 	.set_ios	= mmc_omap_set_ios,
 };
 
-static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
+static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id)
 {
 	struct mmc_omap_slot *slot = NULL;
 	struct mmc_host *mmc;
@@ -1485,24 +1485,26 @@
 	}
 
 	host->nr_slots = pdata->nr_slots;
-	for (i = 0; i < pdata->nr_slots; i++) {
-		ret = mmc_omap_new_slot(host, i);
-		if (ret < 0) {
-			while (--i >= 0)
-				mmc_omap_remove_slot(host->slots[i]);
-
-			goto err_plat_cleanup;
-		}
-	}
-
 	host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
 
 	host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
 	if (!host->mmc_omap_wq)
 		goto err_plat_cleanup;
 
+	for (i = 0; i < pdata->nr_slots; i++) {
+		ret = mmc_omap_new_slot(host, i);
+		if (ret < 0) {
+			while (--i >= 0)
+				mmc_omap_remove_slot(host->slots[i]);
+
+			goto err_destroy_wq;
+		}
+	}
+
 	return 0;
 
+err_destroy_wq:
+	destroy_workqueue(host->mmc_omap_wq);
 err_plat_cleanup:
 	if (pdata->cleanup)
 		pdata->cleanup(&pdev->dev);
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 9a7a60a..389a3ee 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -85,7 +85,6 @@
 #define BRR_ENABLE		(1 << 5)
 #define DTO_ENABLE		(1 << 20)
 #define INIT_STREAM		(1 << 1)
-#define ACEN_ACMD12		(1 << 2)
 #define DP_SELECT		(1 << 21)
 #define DDIR			(1 << 4)
 #define DMA_EN			0x1
@@ -117,7 +116,6 @@
 #define OMAP_MMC_MAX_CLOCK	52000000
 #define DRIVER_NAME		"omap_hsmmc"
 
-#define AUTO_CMD12		(1 << 0)	/* Auto CMD12 support */
 /*
  * One controller can have multiple slots, like on some omap boards using
  * omap.c controller driver. Luckily this is not currently done on any known
@@ -177,7 +175,6 @@
 	int			reqs_blocked;
 	int			use_reg;
 	int			req_in_progress;
-	unsigned int		flags;
 	struct omap_hsmmc_next	next_data;
 
 	struct	omap_mmc_platform_data	*pdata;
@@ -773,8 +770,6 @@
 		cmdtype = 0x3;
 
 	cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
-	if ((host->flags & AUTO_CMD12) && mmc_op_multi(cmd->opcode))
-		cmdreg |= ACEN_ACMD12;
 
 	if (data) {
 		cmdreg |= DP_SELECT | MSBS | BCE;
@@ -847,14 +842,11 @@
 	else
 		data->bytes_xfered = 0;
 
-	if (data->stop && ((!(host->flags & AUTO_CMD12)) || data->error)) {
-		omap_hsmmc_start_command(host, data->stop, NULL);
-	} else {
-		if (data->stop)
-			data->stop->resp[0] = OMAP_HSMMC_READ(host->base,
-							RSP76);
+	if (!data->stop) {
 		omap_hsmmc_request_done(host, data->mrq);
+		return;
 	}
+	omap_hsmmc_start_command(host, data->stop, NULL);
 }
 
 /*
@@ -1859,7 +1851,6 @@
 	host->mapbase	= res->start + pdata->reg_offset;
 	host->base	= ioremap(host->mapbase, SZ_4K);
 	host->power_mode = MMC_POWER_OFF;
-	host->flags	= AUTO_CMD12;
 	host->next_data.cookie = 1;
 
 	platform_set_drvdata(pdev, host);
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 55a164f..a50c205 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -404,7 +404,7 @@
 		if (sc->ext_cd_irq &&
 		    request_threaded_irq(sc->ext_cd_irq, NULL,
 					 sdhci_s3c_gpio_card_detect_thread,
-					 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+					 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 					 dev_name(dev), sc) == 0) {
 			int status = gpio_get_value(sc->ext_cd_gpio);
 			if (pdata->ext_cd_gpio_invert)
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 1fe32df..423da81 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -4,7 +4,7 @@
  * Support of SDHCI platform devices for spear soc family
  *
  * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * Inspired by sdhci-pltfm.c
  *
@@ -289,5 +289,5 @@
 module_platform_driver(sdhci_driver);
 
 MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index e626732..f4b8b4d 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -680,8 +680,8 @@
 	}
 
 	if (count >= 0xF) {
-		pr_warning("%s: Too large timeout 0x%x requested for CMD%d!\n",
-			   mmc_hostname(host->mmc), count, cmd->opcode);
+		DBG("%s: Too large timeout 0x%x requested for CMD%d!\n",
+		    mmc_hostname(host->mmc), count, cmd->opcode);
 		count = 0xE;
 	}
 
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index ae36d7e..551e316 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -304,32 +304,17 @@
 }
 
 static void mtdoops_do_dump(struct kmsg_dumper *dumper,
-		enum kmsg_dump_reason reason, const char *s1, unsigned long l1,
-		const char *s2, unsigned long l2)
+			    enum kmsg_dump_reason reason)
 {
 	struct mtdoops_context *cxt = container_of(dumper,
 			struct mtdoops_context, dump);
-	unsigned long s1_start, s2_start;
-	unsigned long l1_cpy, l2_cpy;
-	char *dst;
-
-	if (reason != KMSG_DUMP_OOPS &&
-	    reason != KMSG_DUMP_PANIC)
-		return;
 
 	/* Only dump oopses if dump_oops is set */
 	if (reason == KMSG_DUMP_OOPS && !dump_oops)
 		return;
 
-	dst = cxt->oops_buf + MTDOOPS_HEADER_SIZE; /* Skip the header */
-	l2_cpy = min(l2, record_size - MTDOOPS_HEADER_SIZE);
-	l1_cpy = min(l1, record_size - MTDOOPS_HEADER_SIZE - l2_cpy);
-
-	s2_start = l2 - l2_cpy;
-	s1_start = l1 - l1_cpy;
-
-	memcpy(dst, s1 + s1_start, l1_cpy);
-	memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
+	kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE,
+			     record_size - MTDOOPS_HEADER_SIZE, NULL);
 
 	/* Panics must be written immediately */
 	if (reason != KMSG_DUMP_OOPS)
@@ -375,6 +360,7 @@
 		return;
 	}
 
+	cxt->dump.max_reason = KMSG_DUMP_OOPS;
 	cxt->dump.dump = mtdoops_do_dump;
 	err = kmsg_dump_register(&cxt->dump);
 	if (err) {
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 41371ba1..f3f6cfed 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -102,7 +102,7 @@
 static int cafe_device_ready(struct mtd_info *mtd)
 {
 	struct cafe_priv *cafe = mtd->priv;
-	int result = !!(cafe_readl(cafe, NAND_STATUS) | 0x40000000);
+	int result = !!(cafe_readl(cafe, NAND_STATUS) & 0x40000000);
 	uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
 
 	cafe_writel(cafe, irqs, NAND_IRQ);
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index d47586c..a11253a0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3501,6 +3501,13 @@
 	/* propagate ecc info to mtd_info */
 	mtd->ecclayout = chip->ecc.layout;
 	mtd->ecc_strength = chip->ecc.strength;
+	/*
+	 * Initialize bitflip_threshold to its default prior scan_bbt() call.
+	 * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
+	 * properly set.
+	 */
+	if (!mtd->bitflip_threshold)
+		mtd->bitflip_threshold = mtd->ecc_strength;
 
 	/* Check, if we should skip the bad block table scan */
 	if (chip->options & NAND_SKIP_BBTSCAN)
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index 09d4f8d..7c13803 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -264,7 +264,7 @@
  */
 int ubi_debugfs_init(void)
 {
-	if (!IS_ENABLED(DEBUG_FS))
+	if (!IS_ENABLED(CONFIG_DEBUG_FS))
 		return 0;
 
 	dfs_rootdir = debugfs_create_dir("ubi", NULL);
@@ -284,7 +284,7 @@
  */
 void ubi_debugfs_exit(void)
 {
-	if (IS_ENABLED(DEBUG_FS))
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
 		debugfs_remove(dfs_rootdir);
 }
 
@@ -407,7 +407,7 @@
 	struct dentry *dent;
 	struct ubi_debug_info *d = ubi->dbg;
 
-	if (!IS_ENABLED(DEBUG_FS))
+	if (!IS_ENABLED(CONFIG_DEBUG_FS))
 		return 0;
 
 	n = snprintf(d->dfs_dir_name, UBI_DFS_DIR_LEN + 1, UBI_DFS_DIR_NAME,
@@ -477,6 +477,6 @@
  */
 void ubi_debugfs_exit_dev(struct ubi_device *ubi)
 {
-	if (IS_ENABLED(DEBUG_FS))
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
 		debugfs_remove_recursive(ubi->dbg->dfs_dir);
 }
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2ee8cf9..b9c2ae62 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -76,6 +76,7 @@
 #include <net/route.h>
 #include <net/net_namespace.h>
 #include <net/netns/generic.h>
+#include <net/pkt_sched.h>
 #include "bonding.h"
 #include "bond_3ad.h"
 #include "bond_alb.h"
@@ -381,8 +382,6 @@
 	return next;
 }
 
-#define bond_queue_mapping(skb) (*(u16 *)((skb)->cb))
-
 /**
  * bond_dev_queue_xmit - Prepare skb for xmit.
  *
@@ -395,7 +394,9 @@
 {
 	skb->dev = slave_dev;
 
-	skb->queue_mapping = bond_queue_mapping(skb);
+	BUILD_BUG_ON(sizeof(skb->queue_mapping) !=
+		     sizeof(qdisc_skb_cb(skb)->bond_queue_mapping));
+	skb->queue_mapping = qdisc_skb_cb(skb)->bond_queue_mapping;
 
 	if (unlikely(netpoll_tx_running(slave_dev)))
 		bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb);
@@ -4171,7 +4172,7 @@
 	/*
 	 * Save the original txq to restore before passing to the driver
 	 */
-	bond_queue_mapping(skb) = skb->queue_mapping;
+	qdisc_skb_cb(skb)->bond_queue_mapping = skb->queue_mapping;
 
 	if (unlikely(txq >= dev->real_num_tx_queues)) {
 		do {
diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c
index ad284ba..3cea38d 100644
--- a/drivers/net/bonding/bond_procfs.c
+++ b/drivers/net/bonding/bond_procfs.c
@@ -150,14 +150,25 @@
 	}
 }
 
+static const char *bond_slave_link_status(s8 link)
+{
+	static const char * const status[] = {
+		[BOND_LINK_UP] = "up",
+		[BOND_LINK_FAIL] = "going down",
+		[BOND_LINK_DOWN] = "down",
+		[BOND_LINK_BACK] = "going back",
+	};
+
+	return status[link];
+}
+
 static void bond_info_show_slave(struct seq_file *seq,
 				 const struct slave *slave)
 {
 	struct bonding *bond = seq->private;
 
 	seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name);
-	seq_printf(seq, "MII Status: %s\n",
-		   (slave->link == BOND_LINK_UP) ?  "up" : "down");
+	seq_printf(seq, "MII Status: %s\n", bond_slave_link_status(slave->link));
 	if (slave->speed == SPEED_UNKNOWN)
 		seq_printf(seq, "Speed: %s\n", "Unknown");
 	else
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index aef42f0..485bedb 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1082,8 +1082,12 @@
 		}
 	}
 
-	pr_info("%s: Unable to set %.*s as primary slave.\n",
-		bond->dev->name, (int)strlen(buf) - 1, buf);
+	strncpy(bond->params.primary, ifname, IFNAMSIZ);
+	bond->params.primary[IFNAMSIZ - 1] = 0;
+
+	pr_info("%s: Recording %s as primary, "
+		"but it has not been enslaved to %s yet.\n",
+		bond->dev->name, ifname, bond->dev->name);
 out:
 	write_unlock_bh(&bond->curr_slave_lock);
 	read_unlock(&bond->lock);
diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c
index 1520814..4a27adb 100644
--- a/drivers/net/caif/caif_hsi.c
+++ b/drivers/net/caif/caif_hsi.c
@@ -693,8 +693,6 @@
 			 */
 			memcpy(rx_buf, (u8 *)piggy_desc,
 					CFHSI_DESC_SHORT_SZ);
-			/* Mark no embedded frame here */
-			piggy_desc->offset = 0;
 			if (desc_pld_len == -EPROTO)
 				goto out_of_sync;
 		}
@@ -737,6 +735,8 @@
 			/* Extract any payload in piggyback descriptor. */
 			if (cfhsi_rx_desc(piggy_desc, cfhsi) < 0)
 				goto out_of_sync;
+			/* Mark no embedded frame after extracting it */
+			piggy_desc->offset = 0;
 		}
 	}
 
@@ -1178,6 +1178,7 @@
 		dev_err(&ndev->dev, "%s: Registration error: %d.\n",
 			__func__, res);
 		free_netdev(ndev);
+		return -ENODEV;
 	}
 	/* Add CAIF HSI device to list. */
 	spin_lock(&cfhsi_list_lock);
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 536bda0..86cd532 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -590,8 +590,8 @@
 	priv->write_reg(priv, &priv->regs->control,
 			CONTROL_ENABLE_AR);
 
-	if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY &
-					CAN_CTRLMODE_LOOPBACK)) {
+	if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) &&
+	    (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) {
 		/* loopback + silent mode : useful for hot self-test */
 		priv->write_reg(priv, &priv->regs->control, CONTROL_EIE |
 				CONTROL_SIE | CONTROL_IE | CONTROL_TEST);
@@ -686,7 +686,7 @@
  *
  * We iterate from priv->tx_echo to priv->tx_next and check if the
  * packet has been transmitted, echo it back to the CAN framework.
- * If we discover a not yet transmitted package, stop looking for more.
+ * If we discover a not yet transmitted packet, stop looking for more.
  */
 static void c_can_do_tx(struct net_device *dev)
 {
@@ -698,7 +698,7 @@
 	for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
 		msg_obj_no = get_tx_echo_msg_obj(priv);
 		val = c_can_read_reg32(priv, &priv->regs->txrqst1);
-		if (!(val & (1 << msg_obj_no))) {
+		if (!(val & (1 << (msg_obj_no - 1)))) {
 			can_get_echo_skb(dev,
 					msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
 			stats->tx_bytes += priv->read_reg(priv,
@@ -706,6 +706,8 @@
 					& IF_MCONT_DLC_MASK;
 			stats->tx_packets++;
 			c_can_inval_msg_object(dev, 0, msg_obj_no);
+		} else {
+			break;
 		}
 	}
 
@@ -950,7 +952,7 @@
 	struct net_device *dev = napi->dev;
 	struct c_can_priv *priv = netdev_priv(dev);
 
-	irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+	irqstatus = priv->irqstatus;
 	if (!irqstatus)
 		goto end;
 
@@ -1028,12 +1030,11 @@
 
 static irqreturn_t c_can_isr(int irq, void *dev_id)
 {
-	u16 irqstatus;
 	struct net_device *dev = (struct net_device *)dev_id;
 	struct c_can_priv *priv = netdev_priv(dev);
 
-	irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
-	if (!irqstatus)
+	priv->irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+	if (!priv->irqstatus)
 		return IRQ_NONE;
 
 	/* disable all interrupts and schedule the NAPI */
@@ -1063,10 +1064,11 @@
 		goto exit_irq_fail;
 	}
 
+	napi_enable(&priv->napi);
+
 	/* start the c_can controller */
 	c_can_start(dev);
 
-	napi_enable(&priv->napi);
 	netif_start_queue(dev);
 
 	return 0;
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 9b7fbef..5f32d34 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -76,6 +76,7 @@
 	unsigned int tx_next;
 	unsigned int tx_echo;
 	void *priv;		/* for board-specific data */
+	u16 irqstatus;
 };
 
 struct net_device *alloc_c_can_dev(void);
diff --git a/drivers/net/can/cc770/cc770_platform.c b/drivers/net/can/cc770/cc770_platform.c
index 53115ee..688371c 100644
--- a/drivers/net/can/cc770/cc770_platform.c
+++ b/drivers/net/can/cc770/cc770_platform.c
@@ -154,7 +154,7 @@
 	struct cc770_platform_data *pdata = pdev->dev.platform_data;
 
 	priv->can.clock.freq = pdata->osc_freq;
-	if (priv->cpu_interface | CPUIF_DSC)
+	if (priv->cpu_interface & CPUIF_DSC)
 		priv->can.clock.freq /= 2;
 	priv->clkout = pdata->cor;
 	priv->bus_config = pdata->bcr;
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 38c0690..81d4741 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -939,12 +939,12 @@
 		return PTR_ERR(pinctrl);
 
 	if (pdev->dev.of_node) {
-		const u32 *clock_freq_p;
+		const __be32 *clock_freq_p;
 
 		clock_freq_p = of_get_property(pdev->dev.of_node,
 						"clock-frequency", NULL);
 		if (clock_freq_p)
-			clock_freq = *clock_freq_p;
+			clock_freq = be32_to_cpup(clock_freq_p);
 	}
 
 	if (!clock_freq) {
diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c
index 442d91a..bab0158 100644
--- a/drivers/net/dummy.c
+++ b/drivers/net/dummy.c
@@ -187,8 +187,10 @@
 	rtnl_lock();
 	err = __rtnl_link_register(&dummy_link_ops);
 
-	for (i = 0; i < numdummies && !err; i++)
+	for (i = 0; i < numdummies && !err; i++) {
 		err = dummy_init_one();
+		cond_resched();
+	}
 	if (err < 0)
 		__rtnl_link_unregister(&dummy_link_ops);
 	rtnl_unlock();
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index e30e2a2..7de8241 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -747,21 +747,6 @@
 
 #define ETH_RX_ERROR_FALGS		ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG
 
-#define BNX2X_IP_CSUM_ERR(cqe) \
-			(!((cqe)->fast_path_cqe.status_flags & \
-			   ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG) && \
-			 ((cqe)->fast_path_cqe.type_error_flags & \
-			  ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG))
-
-#define BNX2X_L4_CSUM_ERR(cqe) \
-			(!((cqe)->fast_path_cqe.status_flags & \
-			   ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) && \
-			 ((cqe)->fast_path_cqe.type_error_flags & \
-			  ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG))
-
-#define BNX2X_RX_CSUM_OK(cqe) \
-			(!(BNX2X_L4_CSUM_ERR(cqe) || BNX2X_IP_CSUM_ERR(cqe)))
-
 #define BNX2X_PRS_FLAG_OVERETH_IPV4(flags) \
 				(((le16_to_cpu(flags) & \
 				   PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) >> \
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index ad0743b..8098eea 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -190,7 +190,7 @@
 
 		if ((netif_tx_queue_stopped(txq)) &&
 		    (bp->state == BNX2X_STATE_OPEN) &&
-		    (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3))
+		    (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4))
 			netif_tx_wake_queue(txq);
 
 		__netif_tx_unlock(txq);
@@ -617,6 +617,25 @@
 	return 0;
 }
 
+static void bnx2x_csum_validate(struct sk_buff *skb, union eth_rx_cqe *cqe,
+				struct bnx2x_fastpath *fp)
+{
+	/* Do nothing if no IP/L4 csum validation was done */
+
+	if (cqe->fast_path_cqe.status_flags &
+	    (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG |
+	     ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG))
+		return;
+
+	/* If both IP/L4 validation were done, check if an error was found. */
+
+	if (cqe->fast_path_cqe.type_error_flags &
+	    (ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG |
+	     ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG))
+		fp->eth_q_stats.hw_csum_err++;
+	else
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
 
 int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 {
@@ -806,13 +825,9 @@
 
 		skb_checksum_none_assert(skb);
 
-		if (bp->dev->features & NETIF_F_RXCSUM) {
+		if (bp->dev->features & NETIF_F_RXCSUM)
+			bnx2x_csum_validate(skb, cqe, fp);
 
-			if (likely(BNX2X_RX_CSUM_OK(cqe)))
-				skb->ip_summed = CHECKSUM_UNNECESSARY;
-			else
-				fp->eth_q_stats.hw_csum_err++;
-		}
 
 		skb_record_rx_queue(skb, fp->rx_queue);
 
@@ -2501,8 +2516,6 @@
 /* we split the first BD into headers and data BDs
  * to ease the pain of our fellow microcode engineers
  * we use one mapping for both BDs
- * So far this has only been observed to happen
- * in Other Operating Systems(TM)
  */
 static noinline u16 bnx2x_tx_split(struct bnx2x *bp,
 				   struct bnx2x_fp_txdata *txdata,
@@ -3156,7 +3169,7 @@
 
 	txdata->tx_bd_prod += nbd;
 
-	if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 3)) {
+	if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 4)) {
 		netif_tx_stop_queue(txq);
 
 		/* paired memory barrier is in bnx2x_tx_int(), we have to keep
@@ -3165,7 +3178,7 @@
 		smp_mb();
 
 		fp->eth_q_stats.driver_xoff++;
-		if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3)
+		if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 4)
 			netif_tx_wake_queue(txq);
 	}
 	txdata->tx_pkt++;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index a3fb721..6e7d5c0 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -40,6 +40,7 @@
 #define I2C_BSC0			0
 #define I2C_BSC1			1
 #define I2C_WA_RETRY_CNT		3
+#define I2C_WA_PWR_ITER			(I2C_WA_RETRY_CNT - 1)
 #define MCPR_IMC_COMMAND_READ_OP	1
 #define MCPR_IMC_COMMAND_WRITE_OP	2
 
@@ -7659,6 +7660,28 @@
 	return -EINVAL;
 }
 
+static void bnx2x_warpcore_power_module(struct link_params *params,
+					struct bnx2x_phy *phy,
+					u8 power)
+{
+	u32 pin_cfg;
+	struct bnx2x *bp = params->bp;
+
+	pin_cfg = (REG_RD(bp, params->shmem_base +
+			  offsetof(struct shmem_region,
+			dev_info.port_hw_config[params->port].e3_sfp_ctrl)) &
+			PORT_HW_CFG_E3_PWR_DIS_MASK) >>
+			PORT_HW_CFG_E3_PWR_DIS_SHIFT;
+
+	if (pin_cfg == PIN_CFG_NA)
+		return;
+	DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n",
+		       power, pin_cfg);
+	/* Low ==> corresponding SFP+ module is powered
+	 * high ==> the SFP+ module is powered down
+	 */
+	bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1);
+}
 static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 						 struct link_params *params,
 						 u16 addr, u8 byte_cnt,
@@ -7678,6 +7701,12 @@
 	/* 4 byte aligned address */
 	addr32 = addr & (~0x3);
 	do {
+		if (cnt == I2C_WA_PWR_ITER) {
+			bnx2x_warpcore_power_module(params, phy, 0);
+			/* Note that 100us are not enough here */
+			usleep_range(1000,1000);
+			bnx2x_warpcore_power_module(params, phy, 1);
+		}
 		rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt,
 				    data_array);
 	} while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT));
@@ -8200,29 +8229,6 @@
 		bnx2x_set_e1e2_module_fault_led(params, gpio_mode);
 }
 
-static void bnx2x_warpcore_power_module(struct link_params *params,
-					struct bnx2x_phy *phy,
-					u8 power)
-{
-	u32 pin_cfg;
-	struct bnx2x *bp = params->bp;
-
-	pin_cfg = (REG_RD(bp, params->shmem_base +
-			  offsetof(struct shmem_region,
-			dev_info.port_hw_config[params->port].e3_sfp_ctrl)) &
-			PORT_HW_CFG_E3_PWR_DIS_MASK) >>
-			PORT_HW_CFG_E3_PWR_DIS_SHIFT;
-
-	if (pin_cfg == PIN_CFG_NA)
-		return;
-	DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n",
-		       power, pin_cfg);
-	/* Low ==> corresponding SFP+ module is powered
-	 * high ==> the SFP+ module is powered down
-	 */
-	bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1);
-}
-
 static void bnx2x_warpcore_hw_reset(struct bnx2x_phy *phy,
 				    struct link_params *params)
 {
@@ -9748,7 +9754,7 @@
 
 	msleep(1);
 
-	if (!(CHIP_IS_E1(bp)))
+	if (!(CHIP_IS_E1x(bp)))
 		port = BP_PATH(bp);
 	else
 		port = params->port;
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index edeeb51..e47ff8b 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -14275,7 +14275,8 @@
 		}
 	}
 
-	if (tg3_flag(tp, 5755_PLUS))
+	if (tg3_flag(tp, 5755_PLUS) ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
 		tg3_flag_set(tp, SHORT_DMA_BUG);
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 8d06ea3..921c208 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -122,15 +122,15 @@
 			goto done;
 
 		if (compl_status == MCC_STATUS_UNAUTHORIZED_REQUEST) {
-			dev_warn(&adapter->pdev->dev, "This domain(VM) is not "
-				"permitted to execute this cmd (opcode %d)\n",
-				opcode);
+			dev_warn(&adapter->pdev->dev,
+				 "opcode %d-%d is not permitted\n",
+				 opcode, subsystem);
 		} else {
 			extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
 					CQE_STATUS_EXTD_MASK;
-			dev_err(&adapter->pdev->dev, "Cmd (opcode %d) failed:"
-				"status %d, extd-status %d\n",
-				opcode, compl_status, extd_status);
+			dev_err(&adapter->pdev->dev,
+				"opcode %d-%d failed:status %d-%d\n",
+				opcode, subsystem, compl_status, extd_status);
 		}
 	}
 done:
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 9625bf4..b3f3fc3d 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -1566,7 +1566,7 @@
 	u32 rsvd0[BE_TXP_SW_SZ];
 	struct be_erx_stats_v1 erx;
 	struct be_pmem_stats pmem;
-	u32 rsvd1[3];
+	u32 rsvd1[18];
 };
 
 struct be_cmd_req_get_stats_v1 {
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 08efd30..501dfa9 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -736,6 +736,8 @@
 
 	copied = make_tx_wrbs(adapter, txq, skb, wrb_cnt, dummy_wrb);
 	if (copied) {
+		int gso_segs = skb_shinfo(skb)->gso_segs;
+
 		/* record the sent skb in the sent_skb table */
 		BUG_ON(txo->sent_skb_list[start]);
 		txo->sent_skb_list[start] = skb;
@@ -753,8 +755,7 @@
 
 		be_txq_notify(adapter, txq->id, wrb_cnt);
 
-		be_tx_stats_update(txo, wrb_cnt, copied,
-				skb_shinfo(skb)->gso_segs, stopped);
+		be_tx_stats_update(txo, wrb_cnt, copied, gso_segs, stopped);
 	} else {
 		txq->head = start;
 		dev_kfree_skb_any(skb);
@@ -3236,7 +3237,7 @@
 
 	netdev->flags |= IFF_MULTICAST;
 
-	netif_set_gso_max_size(netdev, 65535);
+	netif_set_gso_max_size(netdev, 65535 - ETH_HLEN);
 
 	netdev->netdev_ops = &be_netdev_ops;
 
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 0741ade..f2db8fc 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1804,18 +1804,16 @@
 	if (priv->mode == MQ_MG_MODE) {
 		baddr = &regs->txic0;
 		for_each_set_bit(i, &tx_mask, priv->num_tx_queues) {
-			if (likely(priv->tx_queue[i]->txcoalescing)) {
-				gfar_write(baddr + i, 0);
+			gfar_write(baddr + i, 0);
+			if (likely(priv->tx_queue[i]->txcoalescing))
 				gfar_write(baddr + i, priv->tx_queue[i]->txic);
-			}
 		}
 
 		baddr = &regs->rxic0;
 		for_each_set_bit(i, &rx_mask, priv->num_rx_queues) {
-			if (likely(priv->rx_queue[i]->rxcoalescing)) {
-				gfar_write(baddr + i, 0);
+			gfar_write(baddr + i, 0);
+			if (likely(priv->rx_queue[i]->rxcoalescing))
 				gfar_write(baddr + i, priv->rx_queue[i]->rxic);
-			}
 		}
 	}
 }
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 79b07ec..0cafe4f 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -122,8 +122,10 @@
 
 config IGB_PTP
 	bool "PTP Hardware Clock (PHC)"
-	default y
-	depends on IGB && PTP_1588_CLOCK
+	default n
+	depends on IGB && EXPERIMENTAL
+	select PPS
+	select PTP_1588_CLOCK
 	---help---
 	  Say Y here if you want to use PTP Hardware Clock (PHC) in the
 	  driver.  Only the basic clock operations have been implemented.
@@ -223,7 +225,9 @@
 config IXGBE_PTP
 	bool "PTP Clock Support"
 	default n
-	depends on IXGBE && PTP_1588_CLOCK
+	depends on IXGBE && EXPERIMENTAL
+	select PPS
+	select PTP_1588_CLOCK
 	---help---
 	  Say Y here if you want support for 1588 Timestamping with a
 	  PHC device, using the PTP 1588 Clock support. This is
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 351a409..76edbc1 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -103,6 +103,7 @@
 #define E1000_RXD_ERR_SEQ       0x04    /* Sequence Error */
 #define E1000_RXD_ERR_CXE       0x10    /* Carrier Extension Error */
 #define E1000_RXD_ERR_TCPE      0x20    /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE       0x40    /* IP Checksum Error */
 #define E1000_RXD_ERR_RXE       0x80    /* Rx Data Error */
 #define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */
 
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index d863075..905e214 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -258,7 +258,8 @@
 	 * When SoL/IDER sessions are active, autoneg/speed/duplex
 	 * cannot be changed
 	 */
-	if (hw->phy.ops.check_reset_block(hw)) {
+	if (hw->phy.ops.check_reset_block &&
+	    hw->phy.ops.check_reset_block(hw)) {
 		e_err("Cannot change link characteristics when SoL/IDER is active.\n");
 		return -EINVAL;
 	}
@@ -1615,7 +1616,8 @@
 	 * PHY loopback cannot be performed if SoL/IDER
 	 * sessions are active
 	 */
-	if (hw->phy.ops.check_reset_block(hw)) {
+	if (hw->phy.ops.check_reset_block &&
+	    hw->phy.ops.check_reset_block(hw)) {
 		e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
 		*data = 0;
 		goto out;
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index 026e8b3..a134399 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -709,7 +709,7 @@
 	 * In the case of the phy reset being blocked, we already have a link.
 	 * We do not need to set it up again.
 	 */
-	if (hw->phy.ops.check_reset_block(hw))
+	if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
 		return 0;
 
 	/*
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index a4b0435..623e30b 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -496,7 +496,7 @@
  * @sk_buff: socket buffer with received data
  **/
 static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
-			      __le16 csum, struct sk_buff *skb)
+			      struct sk_buff *skb)
 {
 	u16 status = (u16)status_err;
 	u8 errors = (u8)(status_err >> 24);
@@ -511,8 +511,8 @@
 	if (status & E1000_RXD_STAT_IXSM)
 		return;
 
-	/* TCP/UDP checksum error bit is set */
-	if (errors & E1000_RXD_ERR_TCPE) {
+	/* TCP/UDP checksum error bit or IP checksum error bit is set */
+	if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) {
 		/* let the stack verify checksum errors */
 		adapter->hw_csum_err++;
 		return;
@@ -523,19 +523,7 @@
 		return;
 
 	/* It must be a TCP or UDP packet with a valid checksum */
-	if (status & E1000_RXD_STAT_TCPCS) {
-		/* TCP checksum is good */
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
-	} else {
-		/*
-		 * IP fragment with UDP payload
-		 * Hardware complements the payload checksum, so we undo it
-		 * and then put the value in host order for further stack use.
-		 */
-		__sum16 sum = (__force __sum16)swab16((__force u16)csum);
-		skb->csum = csum_unfold(~sum);
-		skb->ip_summed = CHECKSUM_COMPLETE;
-	}
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
 	adapter->hw_csum_good++;
 }
 
@@ -954,8 +942,7 @@
 		skb_put(skb, length);
 
 		/* Receive Checksum Offload */
-		e1000_rx_checksum(adapter, staterr,
-				  rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+		e1000_rx_checksum(adapter, staterr, skb);
 
 		e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
 
@@ -1341,8 +1328,7 @@
 		total_rx_bytes += skb->len;
 		total_rx_packets++;
 
-		e1000_rx_checksum(adapter, staterr,
-				  rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+		e1000_rx_checksum(adapter, staterr, skb);
 
 		e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
 
@@ -1512,9 +1498,8 @@
 			}
 		}
 
-		/* Receive Checksum Offload XXX recompute due to CRC strip? */
-		e1000_rx_checksum(adapter, staterr,
-				  rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+		/* Receive Checksum Offload */
+		e1000_rx_checksum(adapter, staterr, skb);
 
 		e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
 
@@ -3098,19 +3083,10 @@
 
 	/* Enable Receive Checksum Offload for TCP and UDP */
 	rxcsum = er32(RXCSUM);
-	if (adapter->netdev->features & NETIF_F_RXCSUM) {
+	if (adapter->netdev->features & NETIF_F_RXCSUM)
 		rxcsum |= E1000_RXCSUM_TUOFL;
-
-		/*
-		 * IPv4 payload checksum for UDP fragments must be
-		 * used in conjunction with packet-split.
-		 */
-		if (adapter->rx_ps_pages)
-			rxcsum |= E1000_RXCSUM_IPPCSE;
-	} else {
+	else
 		rxcsum &= ~E1000_RXCSUM_TUOFL;
-		/* no need to clear IPPCSE as it defaults to 0 */
-	}
 	ew32(RXCSUM, rxcsum);
 
 	if (adapter->hw.mac.type == e1000_pch2lan) {
@@ -5241,22 +5217,10 @@
 	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
 
 	/* Jumbo frame support */
-	if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
-		if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
-			e_err("Jumbo Frames not supported.\n");
-			return -EINVAL;
-		}
-
-		/*
-		 * IP payload checksum (enabled with jumbos/packet-split when
-		 * Rx checksum is enabled) and generation of RSS hash is
-		 * mutually exclusive in the hardware.
-		 */
-		if ((netdev->features & NETIF_F_RXCSUM) &&
-		    (netdev->features & NETIF_F_RXHASH)) {
-			e_err("Jumbo frames cannot be enabled when both receive checksum offload and receive hashing are enabled.  Disable one of the receive offload features before enabling jumbos.\n");
-			return -EINVAL;
-		}
+	if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+	    !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
+		e_err("Jumbo Frames not supported.\n");
+		return -EINVAL;
 	}
 
 	/* Supported frame sizes */
@@ -6030,17 +5994,6 @@
 			 NETIF_F_RXALL)))
 		return 0;
 
-	/*
-	 * IP payload checksum (enabled with jumbos/packet-split when Rx
-	 * checksum is enabled) and generation of RSS hash is mutually
-	 * exclusive in the hardware.
-	 */
-	if (adapter->rx_ps_pages &&
-	    (features & NETIF_F_RXCSUM) && (features & NETIF_F_RXHASH)) {
-		e_err("Enabling both receive checksum offload and receive hashing is not possible with jumbo frames.  Disable jumbos or enable only one of the receive offload features.\n");
-		return -EINVAL;
-	}
-
 	if (changed & NETIF_F_RXFCS) {
 		if (features & NETIF_F_RXFCS) {
 			adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
@@ -6237,7 +6190,7 @@
 		adapter->hw.phy.ms_type = e1000_ms_hw_default;
 	}
 
-	if (hw->phy.ops.check_reset_block(hw))
+	if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
 		e_info("PHY reset is blocked due to SOL/IDER session.\n");
 
 	/* Set initial default active device features */
@@ -6404,7 +6357,7 @@
 	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000e_release_hw_control(adapter);
 err_eeprom:
-	if (!hw->phy.ops.check_reset_block(hw))
+	if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw))
 		e1000_phy_hw_reset(&adapter->hw);
 err_hw_init:
 	kfree(adapter->tx_ring);
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 0334d01..b860d4f 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -2155,9 +2155,11 @@
 	s32 ret_val;
 	u32 ctrl;
 
-	ret_val = phy->ops.check_reset_block(hw);
-	if (ret_val)
-		return 0;
+	if (phy->ops.check_reset_block) {
+		ret_val = phy->ops.check_reset_block(hw);
+		if (ret_val)
+			return 0;
+	}
 
 	ret_val = phy->ops.acquire(hw);
 	if (ret_val)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index e650839..5e84eaa 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -206,8 +206,6 @@
 		mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
 		break;
 	case e1000_i350:
-	case e1000_i210:
-	case e1000_i211:
 		mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
 		break;
 	default:
diff --git a/drivers/net/ethernet/intel/igbvf/ethtool.c b/drivers/net/ethernet/intel/igbvf/ethtool.c
index 8ce6706..90eef07 100644
--- a/drivers/net/ethernet/intel/igbvf/ethtool.c
+++ b/drivers/net/ethernet/intel/igbvf/ethtool.c
@@ -357,21 +357,28 @@
 	struct igbvf_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
-	if ((ec->rx_coalesce_usecs > IGBVF_MAX_ITR_USECS) ||
-	    ((ec->rx_coalesce_usecs > 3) &&
-	     (ec->rx_coalesce_usecs < IGBVF_MIN_ITR_USECS)) ||
-	    (ec->rx_coalesce_usecs == 2))
-		return -EINVAL;
-
-	/* convert to rate of irq's per second */
-	if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) {
-		adapter->current_itr = IGBVF_START_ITR;
-		adapter->requested_itr = ec->rx_coalesce_usecs;
-	} else {
+	if ((ec->rx_coalesce_usecs >= IGBVF_MIN_ITR_USECS) &&
+	     (ec->rx_coalesce_usecs <= IGBVF_MAX_ITR_USECS)) {
 		adapter->current_itr = ec->rx_coalesce_usecs << 2;
 		adapter->requested_itr = 1000000000 /
 					(adapter->current_itr * 256);
-	}
+	} else if ((ec->rx_coalesce_usecs == 3) ||
+		   (ec->rx_coalesce_usecs == 2)) {
+		adapter->current_itr = IGBVF_START_ITR;
+		adapter->requested_itr = ec->rx_coalesce_usecs;
+	} else if (ec->rx_coalesce_usecs == 0) {
+		/*
+		 * The user's desire is to turn off interrupt throttling
+		 * altogether, but due to HW limitations, we can't do that.
+		 * Instead we set a very small value in EITR, which would
+		 * allow ~967k interrupts per second, but allow the adapter's
+		 * internal clocking to still function properly.
+		 */
+		adapter->current_itr = 4;
+		adapter->requested_itr = 1000000000 /
+					(adapter->current_itr * 256);
+	} else
+		return -EINVAL;
 
 	writel(adapter->current_itr,
 	       hw->hw_addr + adapter->rx_ring->itr_register);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 3ef3c52..7af291e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -196,7 +196,7 @@
 	__IXGBE_HANG_CHECK_ARMED,
 	__IXGBE_RX_RSC_ENABLED,
 	__IXGBE_RX_CSUM_UDP_ZERO_ERR,
-	__IXGBE_RX_FCOE_BUFSZ,
+	__IXGBE_RX_FCOE,
 };
 
 #define check_for_tx_hang(ring) \
@@ -290,7 +290,7 @@
 #if defined(IXGBE_FCOE) && (PAGE_SIZE < 8192)
 static inline unsigned int ixgbe_rx_pg_order(struct ixgbe_ring *ring)
 {
-	return test_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state) ? 1 : 0;
+	return test_bit(__IXGBE_RX_FCOE, &ring->state) ? 1 : 0;
 }
 #else
 #define ixgbe_rx_pg_order(_ring) 0
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
index af1a531..c377706 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
@@ -634,7 +634,7 @@
 			f = &adapter->ring_feature[RING_F_FCOE];
 			if ((rxr_idx >= f->mask) &&
 			    (rxr_idx < f->mask + f->indices))
-				set_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state);
+				set_bit(__IXGBE_RX_FCOE, &ring->state);
 		}
 
 #endif /* IXGBE_FCOE */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index bf20457..18ca3bc 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1058,17 +1058,17 @@
 #ifdef IXGBE_FCOE
 /**
  * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type
- * @adapter: address of board private structure
+ * @ring: structure containing ring specific data
  * @rx_desc: advanced rx descriptor
  *
  * Returns : true if it is FCoE pkt
  */
-static inline bool ixgbe_rx_is_fcoe(struct ixgbe_adapter *adapter,
+static inline bool ixgbe_rx_is_fcoe(struct ixgbe_ring *ring,
 				    union ixgbe_adv_rx_desc *rx_desc)
 {
 	__le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
 
-	return (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+	return test_bit(__IXGBE_RX_FCOE, &ring->state) &&
 	       ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) ==
 		(cpu_to_le16(IXGBE_ETQF_FILTER_FCOE <<
 			     IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT)));
@@ -1148,7 +1148,7 @@
 
 	/* alloc new page for storage */
 	if (likely(!page)) {
-		page = alloc_pages(GFP_ATOMIC | __GFP_COLD,
+		page = alloc_pages(GFP_ATOMIC | __GFP_COLD | __GFP_COMP,
 				   ixgbe_rx_pg_order(rx_ring));
 		if (unlikely(!page)) {
 			rx_ring->rx_stats.alloc_rx_page_failed++;
@@ -1390,6 +1390,8 @@
 				     union ixgbe_adv_rx_desc *rx_desc,
 				     struct sk_buff *skb)
 {
+	struct net_device *dev = rx_ring->netdev;
+
 	ixgbe_update_rsc_stats(rx_ring, skb);
 
 	ixgbe_rx_hash(rx_ring, rx_desc, skb);
@@ -1401,14 +1403,15 @@
 		ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, skb);
 #endif
 
-	if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) {
+	if ((dev->features & NETIF_F_HW_VLAN_RX) &&
+	    ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) {
 		u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan);
 		__vlan_hwaccel_put_tag(skb, vid);
 	}
 
 	skb_record_rx_queue(skb, rx_ring->queue_index);
 
-	skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+	skb->protocol = eth_type_trans(skb, dev);
 }
 
 static void ixgbe_rx_skb(struct ixgbe_q_vector *q_vector,
@@ -1546,6 +1549,12 @@
 		skb->truesize -= ixgbe_rx_bufsz(rx_ring);
 	}
 
+#ifdef IXGBE_FCOE
+	/* do not attempt to pad FCoE Frames as this will disrupt DDP */
+	if (ixgbe_rx_is_fcoe(rx_ring, rx_desc))
+		return false;
+
+#endif
 	/* if skb_pad returns an error the skb was freed */
 	if (unlikely(skb->len < 60)) {
 		int pad_len = 60 - skb->len;
@@ -1772,7 +1781,7 @@
 
 #ifdef IXGBE_FCOE
 		/* if ddp, not passing to ULD unless for FCP_RSP or error */
-		if (ixgbe_rx_is_fcoe(adapter, rx_desc)) {
+		if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) {
 			ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb);
 			if (!ddp_bytes) {
 				dev_kfree_skb_any(skb);
@@ -3607,10 +3616,6 @@
 	if (hw->mac.type == ixgbe_mac_82598EB)
 		netif_set_gso_max_size(adapter->netdev, 32768);
 
-
-	/* Enable VLAN tag insert/strip */
-	adapter->netdev->features |= NETIF_F_HW_VLAN_RX;
-
 	hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true);
 
 #ifdef IXGBE_FCOE
@@ -6701,11 +6706,6 @@
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 
-#ifdef CONFIG_DCB
-	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
-		features &= ~NETIF_F_HW_VLAN_RX;
-#endif
-
 	/* return error if RXHASH is being enabled when RSS is not supported */
 	if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
 		features &= ~NETIF_F_RXHASH;
@@ -6718,7 +6718,6 @@
 	if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
 		features &= ~NETIF_F_LRO;
 
-
 	return features;
 }
 
@@ -6766,6 +6765,11 @@
 		need_reset = true;
 	}
 
+	if (features & NETIF_F_HW_VLAN_RX)
+		ixgbe_vlan_strip_enable(adapter);
+	else
+		ixgbe_vlan_strip_disable(adapter);
+
 	if (changed & NETIF_F_RXALL)
 		need_reset = true;
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index ddc6a4d..dcebd12 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -708,6 +708,7 @@
 {
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 incval = 0;
+	u32 timinca = 0;
 	u32 shift = 0;
 	u32 cycle_speed;
 	unsigned long flags;
@@ -730,8 +731,16 @@
 		break;
 	}
 
-	/* Bail if the cycle speed didn't change */
-	if (adapter->cycle_speed == cycle_speed)
+	/*
+	 * grab the current TIMINCA value from the register so that it can be
+	 * double checked. If the register value has been cleared, it must be
+	 * reset to the correct value for generating a cyclecounter. If
+	 * TIMINCA is zero, the SYSTIME registers do not increment at all.
+	 */
+	timinca = IXGBE_READ_REG(hw, IXGBE_TIMINCA);
+
+	/* Bail if the cycle speed didn't change and TIMINCA is non-zero */
+	if (adapter->cycle_speed == cycle_speed && timinca)
 		return;
 
 	/* disable the SDP clock out */
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 04d901d..f0f06b2 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -436,7 +436,9 @@
 	/*
 	 * Hardware-specific parameters.
 	 */
+#if defined(CONFIG_HAVE_CLK)
 	struct clk *clk;
+#endif
 	unsigned int t_clk;
 };
 
@@ -2895,17 +2897,17 @@
 	mp->dev = dev;
 
 	/*
-	 * Get the clk rate, if there is one, otherwise use the default.
+	 * Start with a default rate, and if there is a clock, allow
+	 * it to override the default.
 	 */
+	mp->t_clk = 133000000;
+#if defined(CONFIG_HAVE_CLK)
 	mp->clk = clk_get(&pdev->dev, (pdev->id ? "1" : "0"));
 	if (!IS_ERR(mp->clk)) {
 		clk_prepare_enable(mp->clk);
 		mp->t_clk = clk_get_rate(mp->clk);
-	} else {
-		mp->t_clk = 133000000;
-		printk(KERN_WARNING "Unable to get clock");
 	}
-
+#endif
 	set_params(mp, pd);
 	netif_set_real_num_tx_queues(dev, mp->txq_count);
 	netif_set_real_num_rx_queues(dev, mp->rxq_count);
@@ -2995,10 +2997,13 @@
 		phy_detach(mp->phy);
 	cancel_work_sync(&mp->tx_timeout_task);
 
+#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(mp->clk)) {
 		clk_disable_unprepare(mp->clk);
 		clk_put(mp->clk);
 	}
+#endif
+
 	free_netdev(mp->dev);
 
 	platform_set_drvdata(pdev, NULL);
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index cace36f..28a5445 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -4381,10 +4381,12 @@
 	struct sky2_port *sky2 = netdev_priv(dev);
 	netdev_features_t changed = dev->features ^ features;
 
-	if (changed & NETIF_F_RXCSUM) {
-		bool on = features & NETIF_F_RXCSUM;
-		sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
-			     on ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
+	if ((changed & NETIF_F_RXCSUM) &&
+	    !(sky2->hw->flags & SKY2_HW_NEW_LE)) {
+		sky2_write32(sky2->hw,
+			     Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+			     (features & NETIF_F_RXCSUM)
+			     ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
 	}
 
 	if (changed & NETIF_F_RXHASH)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 926d8aa..073b85b4 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -929,15 +929,20 @@
 		if (priv->rx_cq[i].buf)
 			mlx4_en_destroy_cq(priv, &priv->rx_cq[i]);
 	}
+
+	if (priv->base_tx_qpn) {
+		mlx4_qp_release_range(priv->mdev->dev, priv->base_tx_qpn, priv->tx_ring_num);
+		priv->base_tx_qpn = 0;
+	}
 }
 
 int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
 {
 	struct mlx4_en_port_profile *prof = priv->prof;
 	int i;
-	int base_tx_qpn, err;
+	int err;
 
-	err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &base_tx_qpn);
+	err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &priv->base_tx_qpn);
 	if (err) {
 		en_err(priv, "failed reserving range for TX rings\n");
 		return err;
@@ -949,7 +954,7 @@
 				      prof->tx_ring_size, i, TX))
 			goto err;
 
-		if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], base_tx_qpn + i,
+		if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], priv->base_tx_qpn + i,
 					   prof->tx_ring_size, TXBB_SIZE))
 			goto err;
 	}
@@ -969,7 +974,6 @@
 
 err:
 	en_err(priv, "Failed to allocate NIC resources\n");
-	mlx4_qp_release_range(priv->mdev->dev, base_tx_qpn, priv->tx_ring_num);
 	return -ENOMEM;
 }
 
@@ -1204,9 +1208,11 @@
 	en_warn(priv, "Using %d RX rings\n", prof->rx_ring_num);
 
 	/* Configure port */
+	mlx4_en_calc_rx_buf(dev);
 	err = mlx4_SET_PORT_general(mdev->dev, priv->port,
-				    MLX4_EN_MIN_MTU,
-				    0, 0, 0, 0);
+				    priv->rx_skb_size + ETH_FCS_LEN,
+				    prof->tx_pause, prof->tx_ppp,
+				    prof->rx_pause, prof->rx_ppp);
 	if (err) {
 		en_err(priv, "Failed setting port general configurations "
 		       "for port %d, with error %d\n", priv->port, err);
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index ee6f4fe..a0313de 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1975,6 +1975,8 @@
 	if (err == -EBUSY && (dev->flags & MLX4_FLAG_MSI_X) &&
 	    !mlx4_is_mfunc(dev)) {
 		dev->flags &= ~MLX4_FLAG_MSI_X;
+		dev->caps.num_comp_vectors = 1;
+		dev->caps.comp_pool	   = 0;
 		pci_disable_msix(pdev);
 		err = mlx4_setup_hca(dev);
 	}
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 6ae3509..225c20d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -495,6 +495,7 @@
 	int vids[128];
 	bool wol;
 	struct device *ddev;
+	int base_tx_qpn;
 
 #ifdef CONFIG_MLX4_EN_DCB
 	struct ieee_ets ets;
diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 8d2666f..083d671 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -946,16 +946,16 @@
 			/* Update stats */
 			ndev->stats.tx_packets++;
 			ndev->stats.tx_bytes += skb->len;
-
-			/* Free buffer */
-			dev_kfree_skb_irq(skb);
 		}
+		dev_kfree_skb_irq(skb);
 
 		txcidx = readl(LPC_ENET_TXCONSUMEINDEX(pldat->net_base));
 	}
 
-	if (netif_queue_stopped(ndev))
-		netif_wake_queue(ndev);
+	if (pldat->num_used_tx_buffs <= ENET_TX_DESC/2) {
+		if (netif_queue_stopped(ndev))
+			netif_wake_queue(ndev);
+	}
 }
 
 static int __lpc_handle_recv(struct net_device *ndev, int budget)
@@ -1320,6 +1320,7 @@
 	.ndo_set_rx_mode	= lpc_eth_set_multicast_list,
 	.ndo_do_ioctl		= lpc_eth_ioctl,
 	.ndo_set_mac_address	= lpc_set_mac_address,
+	.ndo_change_mtu		= eth_change_mtu,
 };
 
 static int lpc_eth_drv_probe(struct platform_device *pdev)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 46e77a2..ad98f4d 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -479,7 +479,7 @@
 
 	for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
 		pfn = pci_info[i].id;
-		if (pfn > QLCNIC_MAX_PCI_FUNC) {
+		if (pfn >= QLCNIC_MAX_PCI_FUNC) {
 			ret = QL_STATUS_INVALID_PARAM;
 			goto err_eswitch;
 		}
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 9757ce3..d7a04e0 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -3894,6 +3894,7 @@
 	case RTL_GIGA_MAC_VER_22:
 	case RTL_GIGA_MAC_VER_23:
 	case RTL_GIGA_MAC_VER_24:
+	case RTL_GIGA_MAC_VER_34:
 		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST);
 		break;
 	default:
@@ -5889,11 +5890,7 @@
 	if (status & LinkChg)
 		__rtl8169_check_link_status(dev, tp, tp->mmio_addr, true);
 
-	napi_disable(&tp->napi);
-	rtl_irq_disable(tp);
-
-	napi_enable(&tp->napi);
-	napi_schedule(&tp->napi);
+	rtl_irq_enable_all(tp);
 }
 
 static void rtl_task(struct work_struct *work)
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 667169b..79bf09b 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1011,7 +1011,7 @@
 }
 
 /* Packet receive function */
-static int sh_eth_rx(struct net_device *ndev)
+static int sh_eth_rx(struct net_device *ndev, u32 intr_status)
 {
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 	struct sh_eth_rxdesc *rxdesc;
@@ -1102,9 +1102,11 @@
 	/* Restart Rx engine if stopped. */
 	/* If we don't need to check status, don't. -KDU */
 	if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) {
-		/* fix the values for the next receiving */
-		mdp->cur_rx = mdp->dirty_rx = (sh_eth_read(ndev, RDFAR) -
-					       sh_eth_read(ndev, RDLAR)) >> 4;
+		/* fix the values for the next receiving if RDE is set */
+		if (intr_status & EESR_RDE)
+			mdp->cur_rx = mdp->dirty_rx =
+				(sh_eth_read(ndev, RDFAR) -
+				 sh_eth_read(ndev, RDLAR)) >> 4;
 		sh_eth_write(ndev, EDRRR_R, EDRRR);
 	}
 
@@ -1273,7 +1275,7 @@
 			EESR_RTSF | /* short frame recv */
 			EESR_PRE  | /* PHY-LSI recv error */
 			EESR_CERF)){ /* recv frame CRC error */
-		sh_eth_rx(ndev);
+		sh_eth_rx(ndev, intr_status);
 	}
 
 	/* Tx Check */
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 0364283..9f44827 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -13,7 +13,7 @@
 if STMMAC_ETH
 
 config STMMAC_PLATFORM
-	tristate "STMMAC platform bus support"
+	bool "STMMAC Platform bus support"
 	depends on STMMAC_ETH
 	default y
 	---help---
@@ -26,7 +26,7 @@
 	  If unsure, say N.
 
 config STMMAC_PCI
-	tristate "STMMAC support on PCI bus (EXPERIMENTAL)"
+	bool "STMMAC PCI bus support (EXPERIMENTAL)"
 	depends on STMMAC_ETH && PCI && EXPERIMENTAL
 	---help---
 	  This is to select the Synopsys DWMAC available on PCI devices,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 6b5d060..dc20c56 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -26,6 +26,7 @@
 #include <linux/clk.h>
 #include <linux/stmmac.h>
 #include <linux/phy.h>
+#include <linux/pci.h>
 #include "common.h"
 #ifdef CONFIG_STMMAC_TIMER
 #include "stmmac_timer.h"
@@ -95,7 +96,6 @@
 extern void stmmac_set_ethtool_ops(struct net_device *netdev);
 extern const struct stmmac_desc_ops enh_desc_ops;
 extern const struct stmmac_desc_ops ndesc_ops;
-
 int stmmac_freeze(struct net_device *ndev);
 int stmmac_restore(struct net_device *ndev);
 int stmmac_resume(struct net_device *ndev);
@@ -109,7 +109,7 @@
 static inline int stmmac_clk_enable(struct stmmac_priv *priv)
 {
 	if (!IS_ERR(priv->stmmac_clk))
-		return clk_enable(priv->stmmac_clk);
+		return clk_prepare_enable(priv->stmmac_clk);
 
 	return 0;
 }
@@ -119,7 +119,7 @@
 	if (IS_ERR(priv->stmmac_clk))
 		return;
 
-	clk_disable(priv->stmmac_clk);
+	clk_disable_unprepare(priv->stmmac_clk);
 }
 static inline int stmmac_clk_get(struct stmmac_priv *priv)
 {
@@ -143,3 +143,60 @@
 	return 0;
 }
 #endif /* CONFIG_HAVE_CLK */
+
+
+#ifdef CONFIG_STMMAC_PLATFORM
+extern struct platform_driver stmmac_pltfr_driver;
+static inline int stmmac_register_platform(void)
+{
+	int err;
+
+	err = platform_driver_register(&stmmac_pltfr_driver);
+	if (err)
+		pr_err("stmmac: failed to register the platform driver\n");
+
+	return err;
+}
+static inline void stmmac_unregister_platform(void)
+{
+	platform_driver_register(&stmmac_pltfr_driver);
+}
+#else
+static inline int stmmac_register_platform(void)
+{
+	pr_debug("stmmac: do not register the platf driver\n");
+
+	return -EINVAL;
+}
+static inline void stmmac_unregister_platform(void)
+{
+}
+#endif /* CONFIG_STMMAC_PLATFORM */
+
+#ifdef CONFIG_STMMAC_PCI
+extern struct pci_driver stmmac_pci_driver;
+static inline int stmmac_register_pci(void)
+{
+	int err;
+
+	err = pci_register_driver(&stmmac_pci_driver);
+	if (err)
+		pr_err("stmmac: failed to register the PCI driver\n");
+
+	return err;
+}
+static inline void stmmac_unregister_pci(void)
+{
+	pci_unregister_driver(&stmmac_pci_driver);
+}
+#else
+static inline int stmmac_register_pci(void)
+{
+	pr_debug("stmmac: do not register the PCI driver\n");
+
+	return -EINVAL;
+}
+static inline void stmmac_unregister_pci(void)
+{
+}
+#endif /* CONFIG_STMMAC_PCI */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 7096633..51b3b68 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -833,8 +833,9 @@
 
 /**
  * stmmac_selec_desc_mode
- * @dev : device pointer
- * Description: select the Enhanced/Alternate or Normal descriptors */
+ * @priv : private structure
+ * Description: select the Enhanced/Alternate or Normal descriptors
+ */
 static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
 {
 	if (priv->plat->enh_desc) {
@@ -1861,6 +1862,8 @@
 /**
  * stmmac_dvr_probe
  * @device: device pointer
+ * @plat_dat: platform data pointer
+ * @addr: iobase memory address
  * Description: this is the main probe function used to
  * call the alloc_etherdev, allocate the priv structure.
  */
@@ -2090,6 +2093,34 @@
 }
 #endif /* CONFIG_PM */
 
+/* Driver can be configured w/ and w/ both PCI and Platf drivers
+ * depending on the configuration selected.
+ */
+static int __init stmmac_init(void)
+{
+	int err_plt = 0;
+	int err_pci = 0;
+
+	err_plt = stmmac_register_platform();
+	err_pci = stmmac_register_pci();
+
+	if ((err_pci) && (err_plt)) {
+		pr_err("stmmac: driver registration failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void __exit stmmac_exit(void)
+{
+	stmmac_unregister_platform();
+	stmmac_unregister_pci();
+}
+
+module_init(stmmac_init);
+module_exit(stmmac_exit);
+
 #ifndef MODULE
 static int __init stmmac_cmdline_opt(char *str)
 {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 58fab53..cf826e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -179,7 +179,7 @@
 
 MODULE_DEVICE_TABLE(pci, stmmac_id_table);
 
-static struct pci_driver stmmac_driver = {
+struct pci_driver stmmac_pci_driver = {
 	.name = STMMAC_RESOURCE_NAME,
 	.id_table = stmmac_id_table,
 	.probe = stmmac_pci_probe,
@@ -190,33 +190,6 @@
 #endif
 };
 
-/**
- * stmmac_init_module - Entry point for the driver
- * Description: This function is the entry point for the driver.
- */
-static int __init stmmac_init_module(void)
-{
-	int ret;
-
-	ret = pci_register_driver(&stmmac_driver);
-	if (ret < 0)
-		pr_err("%s: ERROR: driver registration failed\n", __func__);
-
-	return ret;
-}
-
-/**
- * stmmac_cleanup_module - Cleanup routine for the driver
- * Description: This function is the cleanup routine for the driver.
- */
-static void __exit stmmac_cleanup_module(void)
-{
-	pci_unregister_driver(&stmmac_driver);
-}
-
-module_init(stmmac_init_module);
-module_exit(stmmac_cleanup_module);
-
 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PCI driver");
 MODULE_AUTHOR("Rayagond Kokatanur <rayagond.kokatanur@vayavyalabs.com>");
 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 3dd8f08..680d2b8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -255,7 +255,7 @@
 };
 MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
 
-static struct platform_driver stmmac_driver = {
+struct platform_driver stmmac_pltfr_driver = {
 	.probe = stmmac_pltfr_probe,
 	.remove = stmmac_pltfr_remove,
 	.driver = {
@@ -266,8 +266,6 @@
 		   },
 };
 
-module_platform_driver(stmmac_driver);
-
 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PLATFORM driver");
 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c
index 703c8cc..8c726b7 100644
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -3598,7 +3598,6 @@
 static void niu_tx_work(struct niu *np, struct tx_ring_info *rp)
 {
 	struct netdev_queue *txq;
-	unsigned int tx_bytes;
 	u16 pkt_cnt, tmp;
 	int cons, index;
 	u64 cs;
@@ -3621,18 +3620,12 @@
 	netif_printk(np, tx_done, KERN_DEBUG, np->dev,
 		     "%s() pkt_cnt[%u] cons[%d]\n", __func__, pkt_cnt, cons);
 
-	tx_bytes = 0;
-	tmp = pkt_cnt;
-	while (tmp--) {
-		tx_bytes += rp->tx_buffs[cons].skb->len;
+	while (pkt_cnt--)
 		cons = release_tx_packet(np, rp, cons);
-	}
 
 	rp->cons = cons;
 	smp_mb();
 
-	netdev_tx_completed_queue(txq, pkt_cnt, tx_bytes);
-
 out:
 	if (unlikely(netif_tx_queue_stopped(txq) &&
 		     (niu_tx_avail(rp) > NIU_TX_WAKEUP_THRESH(rp)))) {
@@ -4333,7 +4326,6 @@
 			struct tx_ring_info *rp = &np->tx_rings[i];
 
 			niu_free_tx_ring_info(np, rp);
-			netdev_tx_reset_queue(netdev_get_tx_queue(np->dev, i));
 		}
 		kfree(np->tx_rings);
 		np->tx_rings = NULL;
@@ -6739,8 +6731,6 @@
 		prod = NEXT_TX(rp, prod);
 	}
 
-	netdev_tx_sent_queue(txq, skb->len);
-
 	if (prod < rp->prod)
 		rp->wrap_bit ^= TX_RING_KICK_WRAP;
 	rp->prod = prod;
diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
index d614c37..3b5c457 100644
--- a/drivers/net/ethernet/ti/davinci_cpdma.c
+++ b/drivers/net/ethernet/ti/davinci_cpdma.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/net/ethernet/tile/Kconfig b/drivers/net/ethernet/tile/Kconfig
index 2d9218f..098b1c4 100644
--- a/drivers/net/ethernet/tile/Kconfig
+++ b/drivers/net/ethernet/tile/Kconfig
@@ -7,6 +7,8 @@
 	depends on TILE
 	default y
 	select CRC32
+	select TILE_GXIO_MPIPE if TILEGX
+	select HIGH_RES_TIMERS if TILEGX
 	---help---
 	  This is a standard Linux network device driver for the
 	  on-chip Tilera Gigabit Ethernet and XAUI interfaces.
diff --git a/drivers/net/ethernet/tile/Makefile b/drivers/net/ethernet/tile/Makefile
index f634f14..0ef9eef 100644
--- a/drivers/net/ethernet/tile/Makefile
+++ b/drivers/net/ethernet/tile/Makefile
@@ -4,7 +4,7 @@
 
 obj-$(CONFIG_TILE_NET) += tile_net.o
 ifdef CONFIG_TILEGX
-tile_net-objs := tilegx.o mpipe.o iorpc_mpipe.o dma_queue.o
+tile_net-y := tilegx.o
 else
-tile_net-objs := tilepro.o
+tile_net-y := tilepro.o
 endif
diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c
new file mode 100644
index 0000000..83b4b38
--- /dev/null
+++ b/drivers/net/ethernet/tile/tilegx.c
@@ -0,0 +1,1898 @@
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>      /* printk() */
+#include <linux/slab.h>        /* kmalloc() */
+#include <linux/errno.h>       /* error codes */
+#include <linux/types.h>       /* size_t */
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/irq.h>
+#include <linux/netdevice.h>   /* struct device, and other headers */
+#include <linux/etherdevice.h> /* eth_type_trans */
+#include <linux/skbuff.h>
+#include <linux/ioctl.h>
+#include <linux/cdev.h>
+#include <linux/hugetlb.h>
+#include <linux/in6.h>
+#include <linux/timer.h>
+#include <linux/hrtimer.h>
+#include <linux/ktime.h>
+#include <linux/io.h>
+#include <linux/ctype.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+
+#include <asm/checksum.h>
+#include <asm/homecache.h>
+#include <gxio/mpipe.h>
+#include <arch/sim.h>
+
+/* Default transmit lockup timeout period, in jiffies. */
+#define TILE_NET_TIMEOUT (5 * HZ)
+
+/* The maximum number of distinct channels (idesc.channel is 5 bits). */
+#define TILE_NET_CHANNELS 32
+
+/* Maximum number of idescs to handle per "poll". */
+#define TILE_NET_BATCH 128
+
+/* Maximum number of packets to handle per "poll". */
+#define TILE_NET_WEIGHT 64
+
+/* Number of entries in each iqueue. */
+#define IQUEUE_ENTRIES 512
+
+/* Number of entries in each equeue. */
+#define EQUEUE_ENTRIES 2048
+
+/* Total header bytes per equeue slot.  Must be big enough for 2 bytes
+ * of NET_IP_ALIGN alignment, plus 14 bytes (?) of L2 header, plus up to
+ * 60 bytes of actual TCP header.  We round up to align to cache lines.
+ */
+#define HEADER_BYTES 128
+
+/* Maximum completions per cpu per device (must be a power of two).
+ * ISSUE: What is the right number here?  If this is too small, then
+ * egress might block waiting for free space in a completions array.
+ * ISSUE: At the least, allocate these only for initialized echannels.
+ */
+#define TILE_NET_MAX_COMPS 64
+
+#define MAX_FRAGS (MAX_SKB_FRAGS + 1)
+
+/* Size of completions data to allocate.
+ * ISSUE: Probably more than needed since we don't use all the channels.
+ */
+#define COMPS_SIZE (TILE_NET_CHANNELS * sizeof(struct tile_net_comps))
+
+/* Size of NotifRing data to allocate. */
+#define NOTIF_RING_SIZE (IQUEUE_ENTRIES * sizeof(gxio_mpipe_idesc_t))
+
+/* Timeout to wake the per-device TX timer after we stop the queue.
+ * We don't want the timeout too short (adds overhead, and might end
+ * up causing stop/wake/stop/wake cycles) or too long (affects performance).
+ * For the 10 Gb NIC, 30 usec means roughly 30+ 1500-byte packets.
+ */
+#define TX_TIMER_DELAY_USEC 30
+
+/* Timeout to wake the per-cpu egress timer to free completions. */
+#define EGRESS_TIMER_DELAY_USEC 1000
+
+MODULE_AUTHOR("Tilera Corporation");
+MODULE_LICENSE("GPL");
+
+/* A "packet fragment" (a chunk of memory). */
+struct frag {
+	void *buf;
+	size_t length;
+};
+
+/* A single completion. */
+struct tile_net_comp {
+	/* The "complete_count" when the completion will be complete. */
+	s64 when;
+	/* The buffer to be freed when the completion is complete. */
+	struct sk_buff *skb;
+};
+
+/* The completions for a given cpu and echannel. */
+struct tile_net_comps {
+	/* The completions. */
+	struct tile_net_comp comp_queue[TILE_NET_MAX_COMPS];
+	/* The number of completions used. */
+	unsigned long comp_next;
+	/* The number of completions freed. */
+	unsigned long comp_last;
+};
+
+/* The transmit wake timer for a given cpu and echannel. */
+struct tile_net_tx_wake {
+	struct hrtimer timer;
+	struct net_device *dev;
+};
+
+/* Info for a specific cpu. */
+struct tile_net_info {
+	/* The NAPI struct. */
+	struct napi_struct napi;
+	/* Packet queue. */
+	gxio_mpipe_iqueue_t iqueue;
+	/* Our cpu. */
+	int my_cpu;
+	/* True if iqueue is valid. */
+	bool has_iqueue;
+	/* NAPI flags. */
+	bool napi_added;
+	bool napi_enabled;
+	/* Number of small sk_buffs which must still be provided. */
+	unsigned int num_needed_small_buffers;
+	/* Number of large sk_buffs which must still be provided. */
+	unsigned int num_needed_large_buffers;
+	/* A timer for handling egress completions. */
+	struct hrtimer egress_timer;
+	/* True if "egress_timer" is scheduled. */
+	bool egress_timer_scheduled;
+	/* Comps for each egress channel. */
+	struct tile_net_comps *comps_for_echannel[TILE_NET_CHANNELS];
+	/* Transmit wake timer for each egress channel. */
+	struct tile_net_tx_wake tx_wake[TILE_NET_CHANNELS];
+};
+
+/* Info for egress on a particular egress channel. */
+struct tile_net_egress {
+	/* The "equeue". */
+	gxio_mpipe_equeue_t *equeue;
+	/* The headers for TSO. */
+	unsigned char *headers;
+};
+
+/* Info for a specific device. */
+struct tile_net_priv {
+	/* Our network device. */
+	struct net_device *dev;
+	/* The primary link. */
+	gxio_mpipe_link_t link;
+	/* The primary channel, if open, else -1. */
+	int channel;
+	/* The "loopify" egress link, if needed. */
+	gxio_mpipe_link_t loopify_link;
+	/* The "loopify" egress channel, if open, else -1. */
+	int loopify_channel;
+	/* The egress channel (channel or loopify_channel). */
+	int echannel;
+	/* Total stats. */
+	struct net_device_stats stats;
+};
+
+/* Egress info, indexed by "priv->echannel" (lazily created as needed). */
+static struct tile_net_egress egress_for_echannel[TILE_NET_CHANNELS];
+
+/* Devices currently associated with each channel.
+ * NOTE: The array entry can become NULL after ifconfig down, but
+ * we do not free the underlying net_device structures, so it is
+ * safe to use a pointer after reading it from this array.
+ */
+static struct net_device *tile_net_devs_for_channel[TILE_NET_CHANNELS];
+
+/* A mutex for "tile_net_devs_for_channel". */
+static DEFINE_MUTEX(tile_net_devs_for_channel_mutex);
+
+/* The per-cpu info. */
+static DEFINE_PER_CPU(struct tile_net_info, per_cpu_info);
+
+/* The "context" for all devices. */
+static gxio_mpipe_context_t context;
+
+/* Buffer sizes and mpipe enum codes for buffer stacks.
+ * See arch/tile/include/gxio/mpipe.h for the set of possible values.
+ */
+#define BUFFER_SIZE_SMALL_ENUM GXIO_MPIPE_BUFFER_SIZE_128
+#define BUFFER_SIZE_SMALL 128
+#define BUFFER_SIZE_LARGE_ENUM GXIO_MPIPE_BUFFER_SIZE_1664
+#define BUFFER_SIZE_LARGE 1664
+
+/* The small/large "buffer stacks". */
+static int small_buffer_stack = -1;
+static int large_buffer_stack = -1;
+
+/* Amount of memory allocated for each buffer stack. */
+static size_t buffer_stack_size;
+
+/* The actual memory allocated for the buffer stacks. */
+static void *small_buffer_stack_va;
+static void *large_buffer_stack_va;
+
+/* The buckets. */
+static int first_bucket = -1;
+static int num_buckets = 1;
+
+/* The ingress irq. */
+static int ingress_irq = -1;
+
+/* Text value of tile_net.cpus if passed as a module parameter. */
+static char *network_cpus_string;
+
+/* The actual cpus in "network_cpus". */
+static struct cpumask network_cpus_map;
+
+/* If "loopify=LINK" was specified, this is "LINK". */
+static char *loopify_link_name;
+
+/* If "tile_net.custom" was specified, this is non-NULL. */
+static char *custom_str;
+
+/* The "tile_net.cpus" argument specifies the cpus that are dedicated
+ * to handle ingress packets.
+ *
+ * The parameter should be in the form "tile_net.cpus=m-n[,x-y]", where
+ * m, n, x, y are integer numbers that represent the cpus that can be
+ * neither a dedicated cpu nor a dataplane cpu.
+ */
+static bool network_cpus_init(void)
+{
+	char buf[1024];
+	int rc;
+
+	if (network_cpus_string == NULL)
+		return false;
+
+	rc = cpulist_parse_crop(network_cpus_string, &network_cpus_map);
+	if (rc != 0) {
+		pr_warn("tile_net.cpus=%s: malformed cpu list\n",
+			network_cpus_string);
+		return false;
+	}
+
+	/* Remove dedicated cpus. */
+	cpumask_and(&network_cpus_map, &network_cpus_map, cpu_possible_mask);
+
+	if (cpumask_empty(&network_cpus_map)) {
+		pr_warn("Ignoring empty tile_net.cpus='%s'.\n",
+			network_cpus_string);
+		return false;
+	}
+
+	cpulist_scnprintf(buf, sizeof(buf), &network_cpus_map);
+	pr_info("Linux network CPUs: %s\n", buf);
+	return true;
+}
+
+module_param_named(cpus, network_cpus_string, charp, 0444);
+MODULE_PARM_DESC(cpus, "cpulist of cores that handle network interrupts");
+
+/* The "tile_net.loopify=LINK" argument causes the named device to
+ * actually use "loop0" for ingress, and "loop1" for egress.  This
+ * allows an app to sit between the actual link and linux, passing
+ * (some) packets along to linux, and forwarding (some) packets sent
+ * out by linux.
+ */
+module_param_named(loopify, loopify_link_name, charp, 0444);
+MODULE_PARM_DESC(loopify, "name the device to use loop0/1 for ingress/egress");
+
+/* The "tile_net.custom" argument causes us to ignore the "conventional"
+ * classifier metadata, in particular, the "l2_offset".
+ */
+module_param_named(custom, custom_str, charp, 0444);
+MODULE_PARM_DESC(custom, "indicates a (heavily) customized classifier");
+
+/* Atomically update a statistics field.
+ * Note that on TILE-Gx, this operation is fire-and-forget on the
+ * issuing core (single-cycle dispatch) and takes only a few cycles
+ * longer than a regular store when the request reaches the home cache.
+ * No expensive bus management overhead is required.
+ */
+static void tile_net_stats_add(unsigned long value, unsigned long *field)
+{
+	BUILD_BUG_ON(sizeof(atomic_long_t) != sizeof(unsigned long));
+	atomic_long_add(value, (atomic_long_t *)field);
+}
+
+/* Allocate and push a buffer. */
+static bool tile_net_provide_buffer(bool small)
+{
+	int stack = small ? small_buffer_stack : large_buffer_stack;
+	const unsigned long buffer_alignment = 128;
+	struct sk_buff *skb;
+	int len;
+
+	len = sizeof(struct sk_buff **) + buffer_alignment;
+	len += (small ? BUFFER_SIZE_SMALL : BUFFER_SIZE_LARGE);
+	skb = dev_alloc_skb(len);
+	if (skb == NULL)
+		return false;
+
+	/* Make room for a back-pointer to 'skb' and guarantee alignment. */
+	skb_reserve(skb, sizeof(struct sk_buff **));
+	skb_reserve(skb, -(long)skb->data & (buffer_alignment - 1));
+
+	/* Save a back-pointer to 'skb'. */
+	*(struct sk_buff **)(skb->data - sizeof(struct sk_buff **)) = skb;
+
+	/* Make sure "skb" and the back-pointer have been flushed. */
+	wmb();
+
+	gxio_mpipe_push_buffer(&context, stack,
+			       (void *)va_to_tile_io_addr(skb->data));
+
+	return true;
+}
+
+/* Convert a raw mpipe buffer to its matching skb pointer. */
+static struct sk_buff *mpipe_buf_to_skb(void *va)
+{
+	/* Acquire the associated "skb". */
+	struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+	struct sk_buff *skb = *skb_ptr;
+
+	/* Paranoia. */
+	if (skb->data != va) {
+		/* Panic here since there's a reasonable chance
+		 * that corrupt buffers means generic memory
+		 * corruption, with unpredictable system effects.
+		 */
+		panic("Corrupt linux buffer! va=%p, skb=%p, skb->data=%p",
+		      va, skb, skb->data);
+	}
+
+	return skb;
+}
+
+static void tile_net_pop_all_buffers(int stack)
+{
+	for (;;) {
+		tile_io_addr_t addr =
+			(tile_io_addr_t)gxio_mpipe_pop_buffer(&context, stack);
+		if (addr == 0)
+			break;
+		dev_kfree_skb_irq(mpipe_buf_to_skb(tile_io_addr_to_va(addr)));
+	}
+}
+
+/* Provide linux buffers to mPIPE. */
+static void tile_net_provide_needed_buffers(void)
+{
+	struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+
+	while (info->num_needed_small_buffers != 0) {
+		if (!tile_net_provide_buffer(true))
+			goto oops;
+		info->num_needed_small_buffers--;
+	}
+
+	while (info->num_needed_large_buffers != 0) {
+		if (!tile_net_provide_buffer(false))
+			goto oops;
+		info->num_needed_large_buffers--;
+	}
+
+	return;
+
+oops:
+	/* Add a description to the page allocation failure dump. */
+	pr_notice("Tile %d still needs some buffers\n", info->my_cpu);
+}
+
+static inline bool filter_packet(struct net_device *dev, void *buf)
+{
+	/* Filter packets received before we're up. */
+	if (dev == NULL || !(dev->flags & IFF_UP))
+		return true;
+
+	/* Filter out packets that aren't for us. */
+	if (!(dev->flags & IFF_PROMISC) &&
+	    !is_multicast_ether_addr(buf) &&
+	    compare_ether_addr(dev->dev_addr, buf) != 0)
+		return true;
+
+	return false;
+}
+
+static void tile_net_receive_skb(struct net_device *dev, struct sk_buff *skb,
+				 gxio_mpipe_idesc_t *idesc, unsigned long len)
+{
+	struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	/* Encode the actual packet length. */
+	skb_put(skb, len);
+
+	skb->protocol = eth_type_trans(skb, dev);
+
+	/* Acknowledge "good" hardware checksums. */
+	if (idesc->cs && idesc->csum_seed_val == 0xFFFF)
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+	netif_receive_skb(skb);
+
+	/* Update stats. */
+	tile_net_stats_add(1, &priv->stats.rx_packets);
+	tile_net_stats_add(len, &priv->stats.rx_bytes);
+
+	/* Need a new buffer. */
+	if (idesc->size == BUFFER_SIZE_SMALL_ENUM)
+		info->num_needed_small_buffers++;
+	else
+		info->num_needed_large_buffers++;
+}
+
+/* Handle a packet.  Return true if "processed", false if "filtered". */
+static bool tile_net_handle_packet(gxio_mpipe_idesc_t *idesc)
+{
+	struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+	struct net_device *dev = tile_net_devs_for_channel[idesc->channel];
+	uint8_t l2_offset;
+	void *va;
+	void *buf;
+	unsigned long len;
+	bool filter;
+
+	/* Drop packets for which no buffer was available.
+	 * NOTE: This happens under heavy load.
+	 */
+	if (idesc->be) {
+		struct tile_net_priv *priv = netdev_priv(dev);
+		tile_net_stats_add(1, &priv->stats.rx_dropped);
+		gxio_mpipe_iqueue_consume(&info->iqueue, idesc);
+		if (net_ratelimit())
+			pr_info("Dropping packet (insufficient buffers).\n");
+		return false;
+	}
+
+	/* Get the "l2_offset", if allowed. */
+	l2_offset = custom_str ? 0 : gxio_mpipe_idesc_get_l2_offset(idesc);
+
+	/* Get the raw buffer VA (includes "headroom"). */
+	va = tile_io_addr_to_va((unsigned long)(long)idesc->va);
+
+	/* Get the actual packet start/length. */
+	buf = va + l2_offset;
+	len = idesc->l2_size - l2_offset;
+
+	/* Point "va" at the raw buffer. */
+	va -= NET_IP_ALIGN;
+
+	filter = filter_packet(dev, buf);
+	if (filter) {
+		gxio_mpipe_iqueue_drop(&info->iqueue, idesc);
+	} else {
+		struct sk_buff *skb = mpipe_buf_to_skb(va);
+
+		/* Skip headroom, and any custom header. */
+		skb_reserve(skb, NET_IP_ALIGN + l2_offset);
+
+		tile_net_receive_skb(dev, skb, idesc, len);
+	}
+
+	gxio_mpipe_iqueue_consume(&info->iqueue, idesc);
+	return !filter;
+}
+
+/* Handle some packets for the current CPU.
+ *
+ * This function handles up to TILE_NET_BATCH idescs per call.
+ *
+ * ISSUE: Since we do not provide new buffers until this function is
+ * complete, we must initially provide enough buffers for each network
+ * cpu to fill its iqueue and also its batched idescs.
+ *
+ * ISSUE: The "rotting packet" race condition occurs if a packet
+ * arrives after the queue appears to be empty, and before the
+ * hypervisor interrupt is re-enabled.
+ */
+static int tile_net_poll(struct napi_struct *napi, int budget)
+{
+	struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+	unsigned int work = 0;
+	gxio_mpipe_idesc_t *idesc;
+	int i, n;
+
+	/* Process packets. */
+	while ((n = gxio_mpipe_iqueue_try_peek(&info->iqueue, &idesc)) > 0) {
+		for (i = 0; i < n; i++) {
+			if (i == TILE_NET_BATCH)
+				goto done;
+			if (tile_net_handle_packet(idesc + i)) {
+				if (++work >= budget)
+					goto done;
+			}
+		}
+	}
+
+	/* There are no packets left. */
+	napi_complete(&info->napi);
+
+	/* Re-enable hypervisor interrupts. */
+	gxio_mpipe_enable_notif_ring_interrupt(&context, info->iqueue.ring);
+
+	/* HACK: Avoid the "rotting packet" problem. */
+	if (gxio_mpipe_iqueue_try_peek(&info->iqueue, &idesc) > 0)
+		napi_schedule(&info->napi);
+
+	/* ISSUE: Handle completions? */
+
+done:
+	tile_net_provide_needed_buffers();
+
+	return work;
+}
+
+/* Handle an ingress interrupt on the current cpu. */
+static irqreturn_t tile_net_handle_ingress_irq(int irq, void *unused)
+{
+	struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+	napi_schedule(&info->napi);
+	return IRQ_HANDLED;
+}
+
+/* Free some completions.  This must be called with interrupts blocked. */
+static int tile_net_free_comps(gxio_mpipe_equeue_t *equeue,
+				struct tile_net_comps *comps,
+				int limit, bool force_update)
+{
+	int n = 0;
+	while (comps->comp_last < comps->comp_next) {
+		unsigned int cid = comps->comp_last % TILE_NET_MAX_COMPS;
+		struct tile_net_comp *comp = &comps->comp_queue[cid];
+		if (!gxio_mpipe_equeue_is_complete(equeue, comp->when,
+						   force_update || n == 0))
+			break;
+		dev_kfree_skb_irq(comp->skb);
+		comps->comp_last++;
+		if (++n == limit)
+			break;
+	}
+	return n;
+}
+
+/* Add a completion.  This must be called with interrupts blocked.
+ * tile_net_equeue_try_reserve() will have ensured a free completion entry.
+ */
+static void add_comp(gxio_mpipe_equeue_t *equeue,
+		     struct tile_net_comps *comps,
+		     uint64_t when, struct sk_buff *skb)
+{
+	int cid = comps->comp_next % TILE_NET_MAX_COMPS;
+	comps->comp_queue[cid].when = when;
+	comps->comp_queue[cid].skb = skb;
+	comps->comp_next++;
+}
+
+static void tile_net_schedule_tx_wake_timer(struct net_device *dev)
+{
+	struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	hrtimer_start(&info->tx_wake[priv->echannel].timer,
+		      ktime_set(0, TX_TIMER_DELAY_USEC * 1000UL),
+		      HRTIMER_MODE_REL_PINNED);
+}
+
+static enum hrtimer_restart tile_net_handle_tx_wake_timer(struct hrtimer *t)
+{
+	struct tile_net_tx_wake *tx_wake =
+		container_of(t, struct tile_net_tx_wake, timer);
+	netif_wake_subqueue(tx_wake->dev, smp_processor_id());
+	return HRTIMER_NORESTART;
+}
+
+/* Make sure the egress timer is scheduled. */
+static void tile_net_schedule_egress_timer(void)
+{
+	struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+
+	if (!info->egress_timer_scheduled) {
+		hrtimer_start(&info->egress_timer,
+			      ktime_set(0, EGRESS_TIMER_DELAY_USEC * 1000UL),
+			      HRTIMER_MODE_REL_PINNED);
+		info->egress_timer_scheduled = true;
+	}
+}
+
+/* The "function" for "info->egress_timer".
+ *
+ * This timer will reschedule itself as long as there are any pending
+ * completions expected for this tile.
+ */
+static enum hrtimer_restart tile_net_handle_egress_timer(struct hrtimer *t)
+{
+	struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+	unsigned long irqflags;
+	bool pending = false;
+	int i;
+
+	local_irq_save(irqflags);
+
+	/* The timer is no longer scheduled. */
+	info->egress_timer_scheduled = false;
+
+	/* Free all possible comps for this tile. */
+	for (i = 0; i < TILE_NET_CHANNELS; i++) {
+		struct tile_net_egress *egress = &egress_for_echannel[i];
+		struct tile_net_comps *comps = info->comps_for_echannel[i];
+		if (comps->comp_last >= comps->comp_next)
+			continue;
+		tile_net_free_comps(egress->equeue, comps, -1, true);
+		pending = pending || (comps->comp_last < comps->comp_next);
+	}
+
+	/* Reschedule timer if needed. */
+	if (pending)
+		tile_net_schedule_egress_timer();
+
+	local_irq_restore(irqflags);
+
+	return HRTIMER_NORESTART;
+}
+
+/* Helper function for "tile_net_update()".
+ * "dev" (i.e. arg) is the device being brought up or down,
+ * or NULL if all devices are now down.
+ */
+static void tile_net_update_cpu(void *arg)
+{
+	struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+	struct net_device *dev = arg;
+
+	if (!info->has_iqueue)
+		return;
+
+	if (dev != NULL) {
+		if (!info->napi_added) {
+			netif_napi_add(dev, &info->napi,
+				       tile_net_poll, TILE_NET_WEIGHT);
+			info->napi_added = true;
+		}
+		if (!info->napi_enabled) {
+			napi_enable(&info->napi);
+			info->napi_enabled = true;
+		}
+		enable_percpu_irq(ingress_irq, 0);
+	} else {
+		disable_percpu_irq(ingress_irq);
+		if (info->napi_enabled) {
+			napi_disable(&info->napi);
+			info->napi_enabled = false;
+		}
+		/* FIXME: Drain the iqueue. */
+	}
+}
+
+/* Helper function for tile_net_open() and tile_net_stop().
+ * Always called under tile_net_devs_for_channel_mutex.
+ */
+static int tile_net_update(struct net_device *dev)
+{
+	static gxio_mpipe_rules_t rules;  /* too big to fit on the stack */
+	bool saw_channel = false;
+	int channel;
+	int rc;
+	int cpu;
+
+	gxio_mpipe_rules_init(&rules, &context);
+
+	for (channel = 0; channel < TILE_NET_CHANNELS; channel++) {
+		if (tile_net_devs_for_channel[channel] == NULL)
+			continue;
+		if (!saw_channel) {
+			saw_channel = true;
+			gxio_mpipe_rules_begin(&rules, first_bucket,
+					       num_buckets, NULL);
+			gxio_mpipe_rules_set_headroom(&rules, NET_IP_ALIGN);
+		}
+		gxio_mpipe_rules_add_channel(&rules, channel);
+	}
+
+	/* NOTE: This can fail if there is no classifier.
+	 * ISSUE: Can anything else cause it to fail?
+	 */
+	rc = gxio_mpipe_rules_commit(&rules);
+	if (rc != 0) {
+		netdev_warn(dev, "gxio_mpipe_rules_commit failed: %d\n", rc);
+		return -EIO;
+	}
+
+	/* Update all cpus, sequentially (to protect "netif_napi_add()"). */
+	for_each_online_cpu(cpu)
+		smp_call_function_single(cpu, tile_net_update_cpu,
+					 (saw_channel ? dev : NULL), 1);
+
+	/* HACK: Allow packets to flow in the simulator. */
+	if (saw_channel)
+		sim_enable_mpipe_links(0, -1);
+
+	return 0;
+}
+
+/* Allocate and initialize mpipe buffer stacks, and register them in
+ * the mPIPE TLBs, for both small and large packet sizes.
+ * This routine supports tile_net_init_mpipe(), below.
+ */
+static int init_buffer_stacks(struct net_device *dev, int num_buffers)
+{
+	pte_t hash_pte = pte_set_home((pte_t) { 0 }, PAGE_HOME_HASH);
+	int rc;
+
+	/* Compute stack bytes; we round up to 64KB and then use
+	 * alloc_pages() so we get the required 64KB alignment as well.
+	 */
+	buffer_stack_size =
+		ALIGN(gxio_mpipe_calc_buffer_stack_bytes(num_buffers),
+		      64 * 1024);
+
+	/* Allocate two buffer stack indices. */
+	rc = gxio_mpipe_alloc_buffer_stacks(&context, 2, 0, 0);
+	if (rc < 0) {
+		netdev_err(dev, "gxio_mpipe_alloc_buffer_stacks failed: %d\n",
+			   rc);
+		return rc;
+	}
+	small_buffer_stack = rc;
+	large_buffer_stack = rc + 1;
+
+	/* Allocate the small memory stack. */
+	small_buffer_stack_va =
+		alloc_pages_exact(buffer_stack_size, GFP_KERNEL);
+	if (small_buffer_stack_va == NULL) {
+		netdev_err(dev,
+			   "Could not alloc %zd bytes for buffer stacks\n",
+			   buffer_stack_size);
+		return -ENOMEM;
+	}
+	rc = gxio_mpipe_init_buffer_stack(&context, small_buffer_stack,
+					  BUFFER_SIZE_SMALL_ENUM,
+					  small_buffer_stack_va,
+					  buffer_stack_size, 0);
+	if (rc != 0) {
+		netdev_err(dev, "gxio_mpipe_init_buffer_stack: %d\n", rc);
+		return rc;
+	}
+	rc = gxio_mpipe_register_client_memory(&context, small_buffer_stack,
+					       hash_pte, 0);
+	if (rc != 0) {
+		netdev_err(dev,
+			   "gxio_mpipe_register_buffer_memory failed: %d\n",
+			   rc);
+		return rc;
+	}
+
+	/* Allocate the large buffer stack. */
+	large_buffer_stack_va =
+		alloc_pages_exact(buffer_stack_size, GFP_KERNEL);
+	if (large_buffer_stack_va == NULL) {
+		netdev_err(dev,
+			   "Could not alloc %zd bytes for buffer stacks\n",
+			   buffer_stack_size);
+		return -ENOMEM;
+	}
+	rc = gxio_mpipe_init_buffer_stack(&context, large_buffer_stack,
+					  BUFFER_SIZE_LARGE_ENUM,
+					  large_buffer_stack_va,
+					  buffer_stack_size, 0);
+	if (rc != 0) {
+		netdev_err(dev, "gxio_mpipe_init_buffer_stack failed: %d\n",
+			   rc);
+		return rc;
+	}
+	rc = gxio_mpipe_register_client_memory(&context, large_buffer_stack,
+					       hash_pte, 0);
+	if (rc != 0) {
+		netdev_err(dev,
+			   "gxio_mpipe_register_buffer_memory failed: %d\n",
+			   rc);
+		return rc;
+	}
+
+	return 0;
+}
+
+/* Allocate per-cpu resources (memory for completions and idescs).
+ * This routine supports tile_net_init_mpipe(), below.
+ */
+static int alloc_percpu_mpipe_resources(struct net_device *dev,
+					int cpu, int ring)
+{
+	struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+	int order, i, rc;
+	struct page *page;
+	void *addr;
+
+	/* Allocate the "comps". */
+	order = get_order(COMPS_SIZE);
+	page = homecache_alloc_pages(GFP_KERNEL, order, cpu);
+	if (page == NULL) {
+		netdev_err(dev, "Failed to alloc %zd bytes comps memory\n",
+			   COMPS_SIZE);
+		return -ENOMEM;
+	}
+	addr = pfn_to_kaddr(page_to_pfn(page));
+	memset(addr, 0, COMPS_SIZE);
+	for (i = 0; i < TILE_NET_CHANNELS; i++)
+		info->comps_for_echannel[i] =
+			addr + i * sizeof(struct tile_net_comps);
+
+	/* If this is a network cpu, create an iqueue. */
+	if (cpu_isset(cpu, network_cpus_map)) {
+		order = get_order(NOTIF_RING_SIZE);
+		page = homecache_alloc_pages(GFP_KERNEL, order, cpu);
+		if (page == NULL) {
+			netdev_err(dev,
+				   "Failed to alloc %zd bytes iqueue memory\n",
+				   NOTIF_RING_SIZE);
+			return -ENOMEM;
+		}
+		addr = pfn_to_kaddr(page_to_pfn(page));
+		rc = gxio_mpipe_iqueue_init(&info->iqueue, &context, ring++,
+					    addr, NOTIF_RING_SIZE, 0);
+		if (rc < 0) {
+			netdev_err(dev,
+				   "gxio_mpipe_iqueue_init failed: %d\n", rc);
+			return rc;
+		}
+		info->has_iqueue = true;
+	}
+
+	return ring;
+}
+
+/* Initialize NotifGroup and buckets.
+ * This routine supports tile_net_init_mpipe(), below.
+ */
+static int init_notif_group_and_buckets(struct net_device *dev,
+					int ring, int network_cpus_count)
+{
+	int group, rc;
+
+	/* Allocate one NotifGroup. */
+	rc = gxio_mpipe_alloc_notif_groups(&context, 1, 0, 0);
+	if (rc < 0) {
+		netdev_err(dev, "gxio_mpipe_alloc_notif_groups failed: %d\n",
+			   rc);
+		return rc;
+	}
+	group = rc;
+
+	/* Initialize global num_buckets value. */
+	if (network_cpus_count > 4)
+		num_buckets = 256;
+	else if (network_cpus_count > 1)
+		num_buckets = 16;
+
+	/* Allocate some buckets, and set global first_bucket value. */
+	rc = gxio_mpipe_alloc_buckets(&context, num_buckets, 0, 0);
+	if (rc < 0) {
+		netdev_err(dev, "gxio_mpipe_alloc_buckets failed: %d\n", rc);
+		return rc;
+	}
+	first_bucket = rc;
+
+	/* Init group and buckets. */
+	rc = gxio_mpipe_init_notif_group_and_buckets(
+		&context, group, ring, network_cpus_count,
+		first_bucket, num_buckets,
+		GXIO_MPIPE_BUCKET_STICKY_FLOW_LOCALITY);
+	if (rc != 0) {
+		netdev_err(
+			dev,
+			"gxio_mpipe_init_notif_group_and_buckets failed: %d\n",
+			rc);
+		return rc;
+	}
+
+	return 0;
+}
+
+/* Create an irq and register it, then activate the irq and request
+ * interrupts on all cores.  Note that "ingress_irq" being initialized
+ * is how we know not to call tile_net_init_mpipe() again.
+ * This routine supports tile_net_init_mpipe(), below.
+ */
+static int tile_net_setup_interrupts(struct net_device *dev)
+{
+	int cpu, rc;
+
+	rc = create_irq();
+	if (rc < 0) {
+		netdev_err(dev, "create_irq failed: %d\n", rc);
+		return rc;
+	}
+	ingress_irq = rc;
+	tile_irq_activate(ingress_irq, TILE_IRQ_PERCPU);
+	rc = request_irq(ingress_irq, tile_net_handle_ingress_irq,
+			 0, NULL, NULL);
+	if (rc != 0) {
+		netdev_err(dev, "request_irq failed: %d\n", rc);
+		destroy_irq(ingress_irq);
+		ingress_irq = -1;
+		return rc;
+	}
+
+	for_each_online_cpu(cpu) {
+		struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+		if (info->has_iqueue) {
+			gxio_mpipe_request_notif_ring_interrupt(
+				&context, cpu_x(cpu), cpu_y(cpu),
+				1, ingress_irq, info->iqueue.ring);
+		}
+	}
+
+	return 0;
+}
+
+/* Undo any state set up partially by a failed call to tile_net_init_mpipe. */
+static void tile_net_init_mpipe_fail(void)
+{
+	int cpu;
+
+	/* Do cleanups that require the mpipe context first. */
+	if (small_buffer_stack >= 0)
+		tile_net_pop_all_buffers(small_buffer_stack);
+	if (large_buffer_stack >= 0)
+		tile_net_pop_all_buffers(large_buffer_stack);
+
+	/* Destroy mpipe context so the hardware no longer owns any memory. */
+	gxio_mpipe_destroy(&context);
+
+	for_each_online_cpu(cpu) {
+		struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+		free_pages((unsigned long)(info->comps_for_echannel[0]),
+			   get_order(COMPS_SIZE));
+		info->comps_for_echannel[0] = NULL;
+		free_pages((unsigned long)(info->iqueue.idescs),
+			   get_order(NOTIF_RING_SIZE));
+		info->iqueue.idescs = NULL;
+	}
+
+	if (small_buffer_stack_va)
+		free_pages_exact(small_buffer_stack_va, buffer_stack_size);
+	if (large_buffer_stack_va)
+		free_pages_exact(large_buffer_stack_va, buffer_stack_size);
+
+	small_buffer_stack_va = NULL;
+	large_buffer_stack_va = NULL;
+	large_buffer_stack = -1;
+	small_buffer_stack = -1;
+	first_bucket = -1;
+}
+
+/* The first time any tilegx network device is opened, we initialize
+ * the global mpipe state.  If this step fails, we fail to open the
+ * device, but if it succeeds, we never need to do it again, and since
+ * tile_net can't be unloaded, we never undo it.
+ *
+ * Note that some resources in this path (buffer stack indices,
+ * bindings from init_buffer_stack, etc.) are hypervisor resources
+ * that are freed implicitly by gxio_mpipe_destroy().
+ */
+static int tile_net_init_mpipe(struct net_device *dev)
+{
+	int i, num_buffers, rc;
+	int cpu;
+	int first_ring, ring;
+	int network_cpus_count = cpus_weight(network_cpus_map);
+
+	if (!hash_default) {
+		netdev_err(dev, "Networking requires hash_default!\n");
+		return -EIO;
+	}
+
+	rc = gxio_mpipe_init(&context, 0);
+	if (rc != 0) {
+		netdev_err(dev, "gxio_mpipe_init failed: %d\n", rc);
+		return -EIO;
+	}
+
+	/* Set up the buffer stacks. */
+	num_buffers =
+		network_cpus_count * (IQUEUE_ENTRIES + TILE_NET_BATCH);
+	rc = init_buffer_stacks(dev, num_buffers);
+	if (rc != 0)
+		goto fail;
+
+	/* Provide initial buffers. */
+	rc = -ENOMEM;
+	for (i = 0; i < num_buffers; i++) {
+		if (!tile_net_provide_buffer(true)) {
+			netdev_err(dev, "Cannot allocate initial sk_bufs!\n");
+			goto fail;
+		}
+	}
+	for (i = 0; i < num_buffers; i++) {
+		if (!tile_net_provide_buffer(false)) {
+			netdev_err(dev, "Cannot allocate initial sk_bufs!\n");
+			goto fail;
+		}
+	}
+
+	/* Allocate one NotifRing for each network cpu. */
+	rc = gxio_mpipe_alloc_notif_rings(&context, network_cpus_count, 0, 0);
+	if (rc < 0) {
+		netdev_err(dev, "gxio_mpipe_alloc_notif_rings failed %d\n",
+			   rc);
+		goto fail;
+	}
+
+	/* Init NotifRings per-cpu. */
+	first_ring = rc;
+	ring = first_ring;
+	for_each_online_cpu(cpu) {
+		rc = alloc_percpu_mpipe_resources(dev, cpu, ring);
+		if (rc < 0)
+			goto fail;
+		ring = rc;
+	}
+
+	/* Initialize NotifGroup and buckets. */
+	rc = init_notif_group_and_buckets(dev, first_ring, network_cpus_count);
+	if (rc != 0)
+		goto fail;
+
+	/* Create and enable interrupts. */
+	rc = tile_net_setup_interrupts(dev);
+	if (rc != 0)
+		goto fail;
+
+	return 0;
+
+fail:
+	tile_net_init_mpipe_fail();
+	return rc;
+}
+
+/* Create persistent egress info for a given egress channel.
+ * Note that this may be shared between, say, "gbe0" and "xgbe0".
+ * ISSUE: Defer header allocation until TSO is actually needed?
+ */
+static int tile_net_init_egress(struct net_device *dev, int echannel)
+{
+	struct page *headers_page, *edescs_page, *equeue_page;
+	gxio_mpipe_edesc_t *edescs;
+	gxio_mpipe_equeue_t *equeue;
+	unsigned char *headers;
+	int headers_order, edescs_order, equeue_order;
+	size_t edescs_size;
+	int edma;
+	int rc = -ENOMEM;
+
+	/* Only initialize once. */
+	if (egress_for_echannel[echannel].equeue != NULL)
+		return 0;
+
+	/* Allocate memory for the "headers". */
+	headers_order = get_order(EQUEUE_ENTRIES * HEADER_BYTES);
+	headers_page = alloc_pages(GFP_KERNEL, headers_order);
+	if (headers_page == NULL) {
+		netdev_warn(dev,
+			    "Could not alloc %zd bytes for TSO headers.\n",
+			    PAGE_SIZE << headers_order);
+		goto fail;
+	}
+	headers = pfn_to_kaddr(page_to_pfn(headers_page));
+
+	/* Allocate memory for the "edescs". */
+	edescs_size = EQUEUE_ENTRIES * sizeof(*edescs);
+	edescs_order = get_order(edescs_size);
+	edescs_page = alloc_pages(GFP_KERNEL, edescs_order);
+	if (edescs_page == NULL) {
+		netdev_warn(dev,
+			    "Could not alloc %zd bytes for eDMA ring.\n",
+			    edescs_size);
+		goto fail_headers;
+	}
+	edescs = pfn_to_kaddr(page_to_pfn(edescs_page));
+
+	/* Allocate memory for the "equeue". */
+	equeue_order = get_order(sizeof(*equeue));
+	equeue_page = alloc_pages(GFP_KERNEL, equeue_order);
+	if (equeue_page == NULL) {
+		netdev_warn(dev,
+			    "Could not alloc %zd bytes for equeue info.\n",
+			    PAGE_SIZE << equeue_order);
+		goto fail_edescs;
+	}
+	equeue = pfn_to_kaddr(page_to_pfn(equeue_page));
+
+	/* Allocate an edma ring.  Note that in practice this can't
+	 * fail, which is good, because we will leak an edma ring if so.
+	 */
+	rc = gxio_mpipe_alloc_edma_rings(&context, 1, 0, 0);
+	if (rc < 0) {
+		netdev_warn(dev, "gxio_mpipe_alloc_edma_rings failed: %d\n",
+			    rc);
+		goto fail_equeue;
+	}
+	edma = rc;
+
+	/* Initialize the equeue. */
+	rc = gxio_mpipe_equeue_init(equeue, &context, edma, echannel,
+				    edescs, edescs_size, 0);
+	if (rc != 0) {
+		netdev_err(dev, "gxio_mpipe_equeue_init failed: %d\n", rc);
+		goto fail_equeue;
+	}
+
+	/* Done. */
+	egress_for_echannel[echannel].equeue = equeue;
+	egress_for_echannel[echannel].headers = headers;
+	return 0;
+
+fail_equeue:
+	__free_pages(equeue_page, equeue_order);
+
+fail_edescs:
+	__free_pages(edescs_page, edescs_order);
+
+fail_headers:
+	__free_pages(headers_page, headers_order);
+
+fail:
+	return rc;
+}
+
+/* Return channel number for a newly-opened link. */
+static int tile_net_link_open(struct net_device *dev, gxio_mpipe_link_t *link,
+			      const char *link_name)
+{
+	int rc = gxio_mpipe_link_open(link, &context, link_name, 0);
+	if (rc < 0) {
+		netdev_err(dev, "Failed to open '%s'\n", link_name);
+		return rc;
+	}
+	rc = gxio_mpipe_link_channel(link);
+	if (rc < 0 || rc >= TILE_NET_CHANNELS) {
+		netdev_err(dev, "gxio_mpipe_link_channel bad value: %d\n", rc);
+		gxio_mpipe_link_close(link);
+		return -EINVAL;
+	}
+	return rc;
+}
+
+/* Help the kernel activate the given network interface. */
+static int tile_net_open(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int cpu, rc;
+
+	mutex_lock(&tile_net_devs_for_channel_mutex);
+
+	/* Do one-time initialization the first time any device is opened. */
+	if (ingress_irq < 0) {
+		rc = tile_net_init_mpipe(dev);
+		if (rc != 0)
+			goto fail;
+	}
+
+	/* Determine if this is the "loopify" device. */
+	if (unlikely((loopify_link_name != NULL) &&
+		     !strcmp(dev->name, loopify_link_name))) {
+		rc = tile_net_link_open(dev, &priv->link, "loop0");
+		if (rc < 0)
+			goto fail;
+		priv->channel = rc;
+		rc = tile_net_link_open(dev, &priv->loopify_link, "loop1");
+		if (rc < 0)
+			goto fail;
+		priv->loopify_channel = rc;
+		priv->echannel = rc;
+	} else {
+		rc = tile_net_link_open(dev, &priv->link, dev->name);
+		if (rc < 0)
+			goto fail;
+		priv->channel = rc;
+		priv->echannel = rc;
+	}
+
+	/* Initialize egress info (if needed).  Once ever, per echannel. */
+	rc = tile_net_init_egress(dev, priv->echannel);
+	if (rc != 0)
+		goto fail;
+
+	tile_net_devs_for_channel[priv->channel] = dev;
+
+	rc = tile_net_update(dev);
+	if (rc != 0)
+		goto fail;
+
+	mutex_unlock(&tile_net_devs_for_channel_mutex);
+
+	/* Initialize the transmit wake timer for this device for each cpu. */
+	for_each_online_cpu(cpu) {
+		struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+		struct tile_net_tx_wake *tx_wake =
+			&info->tx_wake[priv->echannel];
+
+		hrtimer_init(&tx_wake->timer, CLOCK_MONOTONIC,
+			     HRTIMER_MODE_REL);
+		tx_wake->timer.function = tile_net_handle_tx_wake_timer;
+		tx_wake->dev = dev;
+	}
+
+	for_each_online_cpu(cpu)
+		netif_start_subqueue(dev, cpu);
+	netif_carrier_on(dev);
+	return 0;
+
+fail:
+	if (priv->loopify_channel >= 0) {
+		if (gxio_mpipe_link_close(&priv->loopify_link) != 0)
+			netdev_warn(dev, "Failed to close loopify link!\n");
+		priv->loopify_channel = -1;
+	}
+	if (priv->channel >= 0) {
+		if (gxio_mpipe_link_close(&priv->link) != 0)
+			netdev_warn(dev, "Failed to close link!\n");
+		priv->channel = -1;
+	}
+	priv->echannel = -1;
+	tile_net_devs_for_channel[priv->channel] = NULL;
+	mutex_unlock(&tile_net_devs_for_channel_mutex);
+
+	/* Don't return raw gxio error codes to generic Linux. */
+	return (rc > -512) ? rc : -EIO;
+}
+
+/* Help the kernel deactivate the given network interface. */
+static int tile_net_stop(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int cpu;
+
+	for_each_online_cpu(cpu) {
+		struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
+		struct tile_net_tx_wake *tx_wake =
+			&info->tx_wake[priv->echannel];
+
+		hrtimer_cancel(&tx_wake->timer);
+		netif_stop_subqueue(dev, cpu);
+	}
+
+	mutex_lock(&tile_net_devs_for_channel_mutex);
+	tile_net_devs_for_channel[priv->channel] = NULL;
+	(void)tile_net_update(dev);
+	if (priv->loopify_channel >= 0) {
+		if (gxio_mpipe_link_close(&priv->loopify_link) != 0)
+			netdev_warn(dev, "Failed to close loopify link!\n");
+		priv->loopify_channel = -1;
+	}
+	if (priv->channel >= 0) {
+		if (gxio_mpipe_link_close(&priv->link) != 0)
+			netdev_warn(dev, "Failed to close link!\n");
+		priv->channel = -1;
+	}
+	priv->echannel = -1;
+	mutex_unlock(&tile_net_devs_for_channel_mutex);
+
+	return 0;
+}
+
+/* Determine the VA for a fragment. */
+static inline void *tile_net_frag_buf(skb_frag_t *f)
+{
+	unsigned long pfn = page_to_pfn(skb_frag_page(f));
+	return pfn_to_kaddr(pfn) + f->page_offset;
+}
+
+/* Acquire a completion entry and an egress slot, or if we can't,
+ * stop the queue and schedule the tx_wake timer.
+ */
+static s64 tile_net_equeue_try_reserve(struct net_device *dev,
+				       struct tile_net_comps *comps,
+				       gxio_mpipe_equeue_t *equeue,
+				       int num_edescs)
+{
+	/* Try to acquire a completion entry. */
+	if (comps->comp_next - comps->comp_last < TILE_NET_MAX_COMPS - 1 ||
+	    tile_net_free_comps(equeue, comps, 32, false) != 0) {
+
+		/* Try to acquire an egress slot. */
+		s64 slot = gxio_mpipe_equeue_try_reserve(equeue, num_edescs);
+		if (slot >= 0)
+			return slot;
+
+		/* Freeing some completions gives the equeue time to drain. */
+		tile_net_free_comps(equeue, comps, TILE_NET_MAX_COMPS, false);
+
+		slot = gxio_mpipe_equeue_try_reserve(equeue, num_edescs);
+		if (slot >= 0)
+			return slot;
+	}
+
+	/* Still nothing; give up and stop the queue for a short while. */
+	netif_stop_subqueue(dev, smp_processor_id());
+	tile_net_schedule_tx_wake_timer(dev);
+	return -1;
+}
+
+/* Determine how many edesc's are needed for TSO.
+ *
+ * Sometimes, if "sendfile()" requires copying, we will be called with
+ * "data" containing the header and payload, with "frags" being empty.
+ * Sometimes, for example when using NFS over TCP, a single segment can
+ * span 3 fragments.  This requires special care.
+ */
+static int tso_count_edescs(struct sk_buff *skb)
+{
+	struct skb_shared_info *sh = skb_shinfo(skb);
+	unsigned int data_len = skb->data_len;
+	unsigned int p_len = sh->gso_size;
+	long f_id = -1;    /* id of the current fragment */
+	long f_size = -1;  /* size of the current fragment */
+	long f_used = -1;  /* bytes used from the current fragment */
+	long n;            /* size of the current piece of payload */
+	int num_edescs = 0;
+	int segment;
+
+	for (segment = 0; segment < sh->gso_segs; segment++) {
+
+		unsigned int p_used = 0;
+
+		/* One edesc for header and for each piece of the payload. */
+		for (num_edescs++; p_used < p_len; num_edescs++) {
+
+			/* Advance as needed. */
+			while (f_used >= f_size) {
+				f_id++;
+				f_size = sh->frags[f_id].size;
+				f_used = 0;
+			}
+
+			/* Use bytes from the current fragment. */
+			n = p_len - p_used;
+			if (n > f_size - f_used)
+				n = f_size - f_used;
+			f_used += n;
+			p_used += n;
+		}
+
+		/* The last segment may be less than gso_size. */
+		data_len -= p_len;
+		if (data_len < p_len)
+			p_len = data_len;
+	}
+
+	return num_edescs;
+}
+
+/* Prepare modified copies of the skbuff headers.
+ * FIXME: add support for IPv6.
+ */
+static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers,
+				s64 slot)
+{
+	struct skb_shared_info *sh = skb_shinfo(skb);
+	struct iphdr *ih;
+	struct tcphdr *th;
+	unsigned int data_len = skb->data_len;
+	unsigned char *data = skb->data;
+	unsigned int ih_off, th_off, sh_len, p_len;
+	unsigned int isum_seed, tsum_seed, id, seq;
+	long f_id = -1;    /* id of the current fragment */
+	long f_size = -1;  /* size of the current fragment */
+	long f_used = -1;  /* bytes used from the current fragment */
+	long n;            /* size of the current piece of payload */
+	int segment;
+
+	/* Locate original headers and compute various lengths. */
+	ih = ip_hdr(skb);
+	th = tcp_hdr(skb);
+	ih_off = skb_network_offset(skb);
+	th_off = skb_transport_offset(skb);
+	sh_len = th_off + tcp_hdrlen(skb);
+	p_len = sh->gso_size;
+
+	/* Set up seed values for IP and TCP csum and initialize id and seq. */
+	isum_seed = ((0xFFFF - ih->check) +
+		     (0xFFFF - ih->tot_len) +
+		     (0xFFFF - ih->id));
+	tsum_seed = th->check + (0xFFFF ^ htons(skb->len));
+	id = ntohs(ih->id);
+	seq = ntohl(th->seq);
+
+	/* Prepare all the headers. */
+	for (segment = 0; segment < sh->gso_segs; segment++) {
+		unsigned char *buf;
+		unsigned int p_used = 0;
+
+		/* Copy to the header memory for this segment. */
+		buf = headers + (slot % EQUEUE_ENTRIES) * HEADER_BYTES +
+			NET_IP_ALIGN;
+		memcpy(buf, data, sh_len);
+
+		/* Update copied ip header. */
+		ih = (struct iphdr *)(buf + ih_off);
+		ih->tot_len = htons(sh_len + p_len - ih_off);
+		ih->id = htons(id);
+		ih->check = csum_long(isum_seed + ih->tot_len +
+				      ih->id) ^ 0xffff;
+
+		/* Update copied tcp header. */
+		th = (struct tcphdr *)(buf + th_off);
+		th->seq = htonl(seq);
+		th->check = csum_long(tsum_seed + htons(sh_len + p_len));
+		if (segment != sh->gso_segs - 1) {
+			th->fin = 0;
+			th->psh = 0;
+		}
+
+		/* Skip past the header. */
+		slot++;
+
+		/* Skip past the payload. */
+		while (p_used < p_len) {
+
+			/* Advance as needed. */
+			while (f_used >= f_size) {
+				f_id++;
+				f_size = sh->frags[f_id].size;
+				f_used = 0;
+			}
+
+			/* Use bytes from the current fragment. */
+			n = p_len - p_used;
+			if (n > f_size - f_used)
+				n = f_size - f_used;
+			f_used += n;
+			p_used += n;
+
+			slot++;
+		}
+
+		id++;
+		seq += p_len;
+
+		/* The last segment may be less than gso_size. */
+		data_len -= p_len;
+		if (data_len < p_len)
+			p_len = data_len;
+	}
+
+	/* Flush the headers so they are ready for hardware DMA. */
+	wmb();
+}
+
+/* Pass all the data to mpipe for egress. */
+static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue,
+		       struct sk_buff *skb, unsigned char *headers, s64 slot)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	struct skb_shared_info *sh = skb_shinfo(skb);
+	unsigned int data_len = skb->data_len;
+	unsigned int p_len = sh->gso_size;
+	gxio_mpipe_edesc_t edesc_head = { { 0 } };
+	gxio_mpipe_edesc_t edesc_body = { { 0 } };
+	long f_id = -1;    /* id of the current fragment */
+	long f_size = -1;  /* size of the current fragment */
+	long f_used = -1;  /* bytes used from the current fragment */
+	long n;            /* size of the current piece of payload */
+	unsigned long tx_packets = 0, tx_bytes = 0;
+	unsigned int csum_start, sh_len;
+	int segment;
+
+	/* Prepare to egress the headers: set up header edesc. */
+	csum_start = skb_checksum_start_offset(skb);
+	sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+	edesc_head.csum = 1;
+	edesc_head.csum_start = csum_start;
+	edesc_head.csum_dest = csum_start + skb->csum_offset;
+	edesc_head.xfer_size = sh_len;
+
+	/* This is only used to specify the TLB. */
+	edesc_head.stack_idx = large_buffer_stack;
+	edesc_body.stack_idx = large_buffer_stack;
+
+	/* Egress all the edescs. */
+	for (segment = 0; segment < sh->gso_segs; segment++) {
+		void *va;
+		unsigned char *buf;
+		unsigned int p_used = 0;
+
+		/* Egress the header. */
+		buf = headers + (slot % EQUEUE_ENTRIES) * HEADER_BYTES +
+			NET_IP_ALIGN;
+		edesc_head.va = va_to_tile_io_addr(buf);
+		gxio_mpipe_equeue_put_at(equeue, edesc_head, slot);
+		slot++;
+
+		/* Egress the payload. */
+		while (p_used < p_len) {
+
+			/* Advance as needed. */
+			while (f_used >= f_size) {
+				f_id++;
+				f_size = sh->frags[f_id].size;
+				f_used = 0;
+			}
+
+			va = tile_net_frag_buf(&sh->frags[f_id]) + f_used;
+
+			/* Use bytes from the current fragment. */
+			n = p_len - p_used;
+			if (n > f_size - f_used)
+				n = f_size - f_used;
+			f_used += n;
+			p_used += n;
+
+			/* Egress a piece of the payload. */
+			edesc_body.va = va_to_tile_io_addr(va);
+			edesc_body.xfer_size = n;
+			edesc_body.bound = !(p_used < p_len);
+			gxio_mpipe_equeue_put_at(equeue, edesc_body, slot);
+			slot++;
+		}
+
+		tx_packets++;
+		tx_bytes += sh_len + p_len;
+
+		/* The last segment may be less than gso_size. */
+		data_len -= p_len;
+		if (data_len < p_len)
+			p_len = data_len;
+	}
+
+	/* Update stats. */
+	tile_net_stats_add(tx_packets, &priv->stats.tx_packets);
+	tile_net_stats_add(tx_bytes, &priv->stats.tx_bytes);
+}
+
+/* Do "TSO" handling for egress.
+ *
+ * Normally drivers set NETIF_F_TSO only to support hardware TSO;
+ * otherwise the stack uses scatter-gather to implement GSO in software.
+ * On our testing, enabling GSO support (via NETIF_F_SG) drops network
+ * performance down to around 7.5 Gbps on the 10G interfaces, although
+ * also dropping cpu utilization way down, to under 8%.  But
+ * implementing "TSO" in the driver brings performance back up to line
+ * rate, while dropping cpu usage even further, to less than 4%.  In
+ * practice, profiling of GSO shows that skb_segment() is what causes
+ * the performance overheads; we benefit in the driver from using
+ * preallocated memory to duplicate the TCP/IP headers.
+ */
+static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev)
+{
+	struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int channel = priv->echannel;
+	struct tile_net_egress *egress = &egress_for_echannel[channel];
+	struct tile_net_comps *comps = info->comps_for_echannel[channel];
+	gxio_mpipe_equeue_t *equeue = egress->equeue;
+	unsigned long irqflags;
+	int num_edescs;
+	s64 slot;
+
+	/* Determine how many mpipe edesc's are needed. */
+	num_edescs = tso_count_edescs(skb);
+
+	local_irq_save(irqflags);
+
+	/* Try to acquire a completion entry and an egress slot. */
+	slot = tile_net_equeue_try_reserve(dev, comps, equeue, num_edescs);
+	if (slot < 0) {
+		local_irq_restore(irqflags);
+		return NETDEV_TX_BUSY;
+	}
+
+	/* Set up copies of header data properly. */
+	tso_headers_prepare(skb, egress->headers, slot);
+
+	/* Actually pass the data to the network hardware. */
+	tso_egress(dev, equeue, skb, egress->headers, slot);
+
+	/* Add a completion record. */
+	add_comp(equeue, comps, slot + num_edescs - 1, skb);
+
+	local_irq_restore(irqflags);
+
+	/* Make sure the egress timer is scheduled. */
+	tile_net_schedule_egress_timer();
+
+	return NETDEV_TX_OK;
+}
+
+/* Analyze the body and frags for a transmit request. */
+static unsigned int tile_net_tx_frags(struct frag *frags,
+				       struct sk_buff *skb,
+				       void *b_data, unsigned int b_len)
+{
+	unsigned int i, n = 0;
+
+	struct skb_shared_info *sh = skb_shinfo(skb);
+
+	if (b_len != 0) {
+		frags[n].buf = b_data;
+		frags[n++].length = b_len;
+	}
+
+	for (i = 0; i < sh->nr_frags; i++) {
+		skb_frag_t *f = &sh->frags[i];
+		frags[n].buf = tile_net_frag_buf(f);
+		frags[n++].length = skb_frag_size(f);
+	}
+
+	return n;
+}
+
+/* Help the kernel transmit a packet. */
+static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+	struct tile_net_priv *priv = netdev_priv(dev);
+	struct tile_net_egress *egress = &egress_for_echannel[priv->echannel];
+	gxio_mpipe_equeue_t *equeue = egress->equeue;
+	struct tile_net_comps *comps =
+		info->comps_for_echannel[priv->echannel];
+	unsigned int len = skb->len;
+	unsigned char *data = skb->data;
+	unsigned int num_edescs;
+	struct frag frags[MAX_FRAGS];
+	gxio_mpipe_edesc_t edescs[MAX_FRAGS];
+	unsigned long irqflags;
+	gxio_mpipe_edesc_t edesc = { { 0 } };
+	unsigned int i;
+	s64 slot;
+
+	if (skb_is_gso(skb))
+		return tile_net_tx_tso(skb, dev);
+
+	num_edescs = tile_net_tx_frags(frags, skb, data, skb_headlen(skb));
+
+	/* This is only used to specify the TLB. */
+	edesc.stack_idx = large_buffer_stack;
+
+	/* Prepare the edescs. */
+	for (i = 0; i < num_edescs; i++) {
+		edesc.xfer_size = frags[i].length;
+		edesc.va = va_to_tile_io_addr(frags[i].buf);
+		edescs[i] = edesc;
+	}
+
+	/* Mark the final edesc. */
+	edescs[num_edescs - 1].bound = 1;
+
+	/* Add checksum info to the initial edesc, if needed. */
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		unsigned int csum_start = skb_checksum_start_offset(skb);
+		edescs[0].csum = 1;
+		edescs[0].csum_start = csum_start;
+		edescs[0].csum_dest = csum_start + skb->csum_offset;
+	}
+
+	local_irq_save(irqflags);
+
+	/* Try to acquire a completion entry and an egress slot. */
+	slot = tile_net_equeue_try_reserve(dev, comps, equeue, num_edescs);
+	if (slot < 0) {
+		local_irq_restore(irqflags);
+		return NETDEV_TX_BUSY;
+	}
+
+	for (i = 0; i < num_edescs; i++)
+		gxio_mpipe_equeue_put_at(equeue, edescs[i], slot++);
+
+	/* Add a completion record. */
+	add_comp(equeue, comps, slot - 1, skb);
+
+	/* NOTE: Use ETH_ZLEN for short packets (e.g. 42 < 60). */
+	tile_net_stats_add(1, &priv->stats.tx_packets);
+	tile_net_stats_add(max_t(unsigned int, len, ETH_ZLEN),
+			   &priv->stats.tx_bytes);
+
+	local_irq_restore(irqflags);
+
+	/* Make sure the egress timer is scheduled. */
+	tile_net_schedule_egress_timer();
+
+	return NETDEV_TX_OK;
+}
+
+/* Return subqueue id on this core (one per core). */
+static u16 tile_net_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+	return smp_processor_id();
+}
+
+/* Deal with a transmit timeout. */
+static void tile_net_tx_timeout(struct net_device *dev)
+{
+	int cpu;
+
+	for_each_online_cpu(cpu)
+		netif_wake_subqueue(dev, cpu);
+}
+
+/* Ioctl commands. */
+static int tile_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	return -EOPNOTSUPP;
+}
+
+/* Get system network statistics for device. */
+static struct net_device_stats *tile_net_get_stats(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	return &priv->stats;
+}
+
+/* Change the MTU. */
+static int tile_net_change_mtu(struct net_device *dev, int new_mtu)
+{
+	if ((new_mtu < 68) || (new_mtu > 1500))
+		return -EINVAL;
+	dev->mtu = new_mtu;
+	return 0;
+}
+
+/* Change the Ethernet address of the NIC.
+ *
+ * The hypervisor driver does not support changing MAC address.  However,
+ * the hardware does not do anything with the MAC address, so the address
+ * which gets used on outgoing packets, and which is accepted on incoming
+ * packets, is completely up to us.
+ *
+ * Returns 0 on success, negative on failure.
+ */
+static int tile_net_set_mac_address(struct net_device *dev, void *p)
+{
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+	return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void tile_net_netpoll(struct net_device *dev)
+{
+	disable_percpu_irq(ingress_irq);
+	tile_net_handle_ingress_irq(ingress_irq, NULL);
+	enable_percpu_irq(ingress_irq, 0);
+}
+#endif
+
+static const struct net_device_ops tile_net_ops = {
+	.ndo_open = tile_net_open,
+	.ndo_stop = tile_net_stop,
+	.ndo_start_xmit = tile_net_tx,
+	.ndo_select_queue = tile_net_select_queue,
+	.ndo_do_ioctl = tile_net_ioctl,
+	.ndo_get_stats = tile_net_get_stats,
+	.ndo_change_mtu = tile_net_change_mtu,
+	.ndo_tx_timeout = tile_net_tx_timeout,
+	.ndo_set_mac_address = tile_net_set_mac_address,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = tile_net_netpoll,
+#endif
+};
+
+/* The setup function.
+ *
+ * This uses ether_setup() to assign various fields in dev, including
+ * setting IFF_BROADCAST and IFF_MULTICAST, then sets some extra fields.
+ */
+static void tile_net_setup(struct net_device *dev)
+{
+	ether_setup(dev);
+	dev->netdev_ops = &tile_net_ops;
+	dev->watchdog_timeo = TILE_NET_TIMEOUT;
+	dev->features |= NETIF_F_LLTX;
+	dev->features |= NETIF_F_HW_CSUM;
+	dev->features |= NETIF_F_SG;
+	dev->features |= NETIF_F_TSO;
+	dev->mtu = 1500;
+}
+
+/* Allocate the device structure, register the device, and obtain the
+ * MAC address from the hypervisor.
+ */
+static void tile_net_dev_init(const char *name, const uint8_t *mac)
+{
+	int ret;
+	int i;
+	int nz_addr = 0;
+	struct net_device *dev;
+	struct tile_net_priv *priv;
+
+	/* HACK: Ignore "loop" links. */
+	if (strncmp(name, "loop", 4) == 0)
+		return;
+
+	/* Allocate the device structure.  Normally, "name" is a
+	 * template, instantiated by register_netdev(), but not for us.
+	 */
+	dev = alloc_netdev_mqs(sizeof(*priv), name, tile_net_setup,
+			       NR_CPUS, 1);
+	if (!dev) {
+		pr_err("alloc_netdev_mqs(%s) failed\n", name);
+		return;
+	}
+
+	/* Initialize "priv". */
+	priv = netdev_priv(dev);
+	memset(priv, 0, sizeof(*priv));
+	priv->dev = dev;
+	priv->channel = -1;
+	priv->loopify_channel = -1;
+	priv->echannel = -1;
+
+	/* Get the MAC address and set it in the device struct; this must
+	 * be done before the device is opened.  If the MAC is all zeroes,
+	 * we use a random address, since we're probably on the simulator.
+	 */
+	for (i = 0; i < 6; i++)
+		nz_addr |= mac[i];
+
+	if (nz_addr) {
+		memcpy(dev->dev_addr, mac, 6);
+		dev->addr_len = 6;
+	} else {
+		random_ether_addr(dev->dev_addr);
+	}
+
+	/* Register the network device. */
+	ret = register_netdev(dev);
+	if (ret) {
+		netdev_err(dev, "register_netdev failed %d\n", ret);
+		free_netdev(dev);
+		return;
+	}
+}
+
+/* Per-cpu module initialization. */
+static void tile_net_init_module_percpu(void *unused)
+{
+	struct tile_net_info *info = &__get_cpu_var(per_cpu_info);
+	int my_cpu = smp_processor_id();
+
+	info->has_iqueue = false;
+
+	info->my_cpu = my_cpu;
+
+	/* Initialize the egress timer. */
+	hrtimer_init(&info->egress_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	info->egress_timer.function = tile_net_handle_egress_timer;
+}
+
+/* Module initialization. */
+static int __init tile_net_init_module(void)
+{
+	int i;
+	char name[GXIO_MPIPE_LINK_NAME_LEN];
+	uint8_t mac[6];
+
+	pr_info("Tilera Network Driver\n");
+
+	mutex_init(&tile_net_devs_for_channel_mutex);
+
+	/* Initialize each CPU. */
+	on_each_cpu(tile_net_init_module_percpu, NULL, 1);
+
+	/* Find out what devices we have, and initialize them. */
+	for (i = 0; gxio_mpipe_link_enumerate_mac(i, name, mac) >= 0; i++)
+		tile_net_dev_init(name, mac);
+
+	if (!network_cpus_init())
+		network_cpus_map = *cpu_online_mask;
+
+	return 0;
+}
+
+module_init(tile_net_init_module);
diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 4ffcd57..2857ab07 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -478,6 +478,7 @@
 	u32 nvsp_version;
 
 	atomic_t num_outstanding_sends;
+	wait_queue_head_t wait_drain;
 	bool start_remove;
 	bool destroy;
 	/*
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 8b91947..0c56983 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -42,6 +42,7 @@
 	if (!net_device)
 		return NULL;
 
+	init_waitqueue_head(&net_device->wait_drain);
 	net_device->start_remove = false;
 	net_device->destroy = false;
 	net_device->dev = device;
@@ -387,12 +388,8 @@
 	spin_unlock_irqrestore(&device->channel->inbound_lock, flags);
 
 	/* Wait for all send completions */
-	while (atomic_read(&net_device->num_outstanding_sends)) {
-		dev_info(&device->device,
-			"waiting for %d requests to complete...\n",
-			atomic_read(&net_device->num_outstanding_sends));
-		udelay(100);
-	}
+	wait_event(net_device->wait_drain,
+		   atomic_read(&net_device->num_outstanding_sends) == 0);
 
 	netvsc_disconnect_vsp(net_device);
 
@@ -486,6 +483,9 @@
 		num_outstanding_sends =
 			atomic_dec_return(&net_device->num_outstanding_sends);
 
+		if (net_device->destroy && num_outstanding_sends == 0)
+			wake_up(&net_device->wait_drain);
+
 		if (netif_queue_stopped(ndev) && !net_device->start_remove &&
 			(hv_ringbuf_avail_percent(&device->channel->outbound)
 			> RING_AVAIL_PERCENT_HIWATER ||
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 5ac46f5..47f8e89 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -41,6 +41,8 @@
 #define IP1001_APS_ON			11	/* IP1001 APS Mode  bit */
 #define IP101A_G_APS_ON			2	/* IP101A/G APS Mode bit */
 #define IP101A_G_IRQ_CONF_STATUS	0x11	/* Conf Info IRQ & Status Reg */
+#define	IP101A_G_IRQ_PIN_USED		(1<<15) /* INTR pin used */
+#define	IP101A_G_IRQ_DEFAULT		IP101A_G_IRQ_PIN_USED
 
 static int ip175c_config_init(struct phy_device *phydev)
 {
@@ -136,6 +138,11 @@
 	if (c < 0)
 		return c;
 
+	/* INTR pin used: speed/link/duplex will cause an interrupt */
+	c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT);
+	if (c < 0)
+		return c;
+
 	if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
 		/* Additional delay (2ns) used to adjust RX clock phase
 		 * at RGMII interface */
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 683ef1c..5061608 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -96,7 +96,7 @@
 }
 /**
  * of_mdio_find_bus - Given an mii_bus node, find the mii_bus.
- * @mdio_np: Pointer to the mii_bus.
+ * @mdio_bus_np: Pointer to the mii_bus.
  *
  * Returns a pointer to the mii_bus, or NULL if none found.
  *
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 590f902..9d6c80c 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -161,7 +161,7 @@
 static struct phy_driver ks8001_driver = {
 	.phy_id		= PHY_ID_KS8001,
 	.name		= "Micrel KS8001 or KS8721",
-	.phy_id_mask	= 0x00fffff0,
+	.phy_id_mask	= 0x00ffffff,
 	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 	.config_init	= kszphy_config_init,
@@ -174,7 +174,7 @@
 
 static struct phy_driver ksz9021_driver = {
 	.phy_id		= PHY_ID_KSZ9021,
-	.phy_id_mask	= 0x000fff10,
+	.phy_id_mask	= 0x000ffffe,
 	.name		= "Micrel KSZ9021 Gigabit PHY",
 	.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause
 				| SUPPORTED_Asym_Pause),
@@ -240,8 +240,8 @@
 MODULE_LICENSE("GPL");
 
 static struct mdio_device_id __maybe_unused micrel_tbl[] = {
-	{ PHY_ID_KSZ9021, 0x000fff10 },
-	{ PHY_ID_KS8001, 0x00fffff0 },
+	{ PHY_ID_KSZ9021, 0x000ffffe },
+	{ PHY_ID_KS8001, 0x00ffffff },
 	{ PHY_ID_KS8737, 0x00fffff0 },
 	{ PHY_ID_KS8041, 0x00fffff0 },
 	{ PHY_ID_KS8051, 0x00fffff0 },
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index 964031e..a28a983d 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -59,6 +59,7 @@
 #define USB_PRODUCT_IPHONE_3G   0x1292
 #define USB_PRODUCT_IPHONE_3GS  0x1294
 #define USB_PRODUCT_IPHONE_4	0x1297
+#define USB_PRODUCT_IPAD 0x129a
 #define USB_PRODUCT_IPHONE_4_VZW 0x129c
 #define USB_PRODUCT_IPHONE_4S	0x12a0
 
@@ -101,6 +102,10 @@
 		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
 		IPHETH_USBINTF_PROTO) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPAD,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
 		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
 		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
 		IPHETH_USBINTF_PROTO) },
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 3b20678..b01960f 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -197,6 +197,10 @@
 static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
 {
 	struct usbnet *dev = usb_get_intfdata(intf);
+
+	/* can be called while disconnecting */
+	if (!dev)
+		return 0;
 	return qmi_wwan_manage_power(dev, on);
 }
 
@@ -257,29 +261,6 @@
 	return rv;
 }
 
-/* Gobi devices uses identical class/protocol codes for all interfaces regardless
- * of function. Some of these are CDC ACM like and have the exact same endpoints
- * we are looking for. This leaves two possible strategies for identifying the
- * correct interface:
- *   a) hardcoding interface number, or
- *   b) use the fact that the wwan interface is the only one lacking additional
- *      (CDC functional) descriptors
- *
- * Let's see if we can get away with the generic b) solution.
- */
-static int qmi_wwan_bind_gobi(struct usbnet *dev, struct usb_interface *intf)
-{
-	int rv = -EINVAL;
-
-	/* ignore any interface with additional descriptors */
-	if (intf->cur_altsetting->extralen)
-		goto err;
-
-	rv = qmi_wwan_bind_shared(dev, intf);
-err:
-	return rv;
-}
-
 static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf)
 {
 	struct usb_driver *subdriver = (void *)dev->data[0];
@@ -347,15 +328,15 @@
 	.manage_power	= qmi_wwan_manage_power,
 };
 
-static const struct driver_info	qmi_wwan_gobi = {
-	.description	= "Qualcomm Gobi wwan/QMI device",
+static const struct driver_info	qmi_wwan_force_int0 = {
+	.description	= "Qualcomm WWAN/QMI device",
 	.flags		= FLAG_WWAN,
-	.bind		= qmi_wwan_bind_gobi,
+	.bind		= qmi_wwan_bind_shared,
 	.unbind		= qmi_wwan_unbind_shared,
 	.manage_power	= qmi_wwan_manage_power,
+	.data		= BIT(0), /* interface whitelist bitmap */
 };
 
-/* ZTE suck at making USB descriptors */
 static const struct driver_info	qmi_wwan_force_int1 = {
 	.description	= "Qualcomm WWAN/QMI device",
 	.flags		= FLAG_WWAN,
@@ -365,6 +346,15 @@
 	.data		= BIT(1), /* interface whitelist bitmap */
 };
 
+static const struct driver_info	qmi_wwan_force_int3 = {
+	.description	= "Qualcomm WWAN/QMI device",
+	.flags		= FLAG_WWAN,
+	.bind		= qmi_wwan_bind_shared,
+	.unbind		= qmi_wwan_unbind_shared,
+	.manage_power	= qmi_wwan_manage_power,
+	.data		= BIT(3), /* interface whitelist bitmap */
+};
+
 static const struct driver_info	qmi_wwan_force_int4 = {
 	.description	= "Qualcomm WWAN/QMI device",
 	.flags		= FLAG_WWAN,
@@ -390,16 +380,23 @@
 static const struct driver_info	qmi_wwan_sierra = {
 	.description	= "Sierra Wireless wwan/QMI device",
 	.flags		= FLAG_WWAN,
-	.bind		= qmi_wwan_bind_gobi,
+	.bind		= qmi_wwan_bind_shared,
 	.unbind		= qmi_wwan_unbind_shared,
 	.manage_power	= qmi_wwan_manage_power,
 	.data		= BIT(8) | BIT(19), /* interface whitelist bitmap */
 };
 
 #define HUAWEI_VENDOR_ID	0x12D1
+
+/* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */
+#define QMI_GOBI1K_DEVICE(vend, prod) \
+	USB_DEVICE(vend, prod), \
+	.driver_info = (unsigned long)&qmi_wwan_force_int3
+
+/* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */
 #define QMI_GOBI_DEVICE(vend, prod) \
 	USB_DEVICE(vend, prod), \
-	.driver_info = (unsigned long)&qmi_wwan_gobi
+	.driver_info = (unsigned long)&qmi_wwan_force_int0
 
 static const struct usb_device_id products[] = {
 	{	/* Huawei E392, E398 and possibly others sharing both device id and more... */
@@ -510,20 +507,24 @@
 		.bInterfaceProtocol = 0xff,
 		.driver_info        = (unsigned long)&qmi_wwan_sierra,
 	},
-	{QMI_GOBI_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
-	{QMI_GOBI_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
-	{QMI_GOBI_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */
-	{QMI_GOBI_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x05c6, 0x9001)},	/* Generic Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
+
+	/* Gobi 1000 devices */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
+	{QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
+	{QMI_GOBI1K_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */
+	{QMI_GOBI1K_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9001)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
+
+	/* Gobi 2000 and 3000 devices */
 	{QMI_GOBI_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
 	{QMI_GOBI_DEVICE(0x05c6, 0x920b)},	/* Generic Gobi 2000 Modem device */
 	{QMI_GOBI_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */
diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c
index 3faef56..d75d1f5 100644
--- a/drivers/net/usb/sierra_net.c
+++ b/drivers/net/usb/sierra_net.c
@@ -946,7 +946,7 @@
 }
 
 static const u8 sierra_net_ifnum_list[] = { 7, 10, 11 };
-static const struct sierra_net_info_data sierra_net_info_data_68A3 = {
+static const struct sierra_net_info_data sierra_net_info_data_direct_ip = {
 	.rx_urb_size = 8 * 1024,
 	.whitelist = {
 		.infolen = ARRAY_SIZE(sierra_net_ifnum_list),
@@ -954,7 +954,7 @@
 	}
 };
 
-static const struct driver_info sierra_net_info_68A3 = {
+static const struct driver_info sierra_net_info_direct_ip = {
 	.description = "Sierra Wireless USB-to-WWAN Modem",
 	.flags = FLAG_WWAN | FLAG_SEND_ZLP,
 	.bind = sierra_net_bind,
@@ -962,12 +962,18 @@
 	.status = sierra_net_status,
 	.rx_fixup = sierra_net_rx_fixup,
 	.tx_fixup = sierra_net_tx_fixup,
-	.data = (unsigned long)&sierra_net_info_data_68A3,
+	.data = (unsigned long)&sierra_net_info_data_direct_ip,
 };
 
 static const struct usb_device_id products[] = {
 	{USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */
-	.driver_info = (unsigned long) &sierra_net_info_68A3},
+	.driver_info = (unsigned long) &sierra_net_info_direct_ip},
+	{USB_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */
+	.driver_info = (unsigned long) &sierra_net_info_direct_ip},
+	{USB_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */
+	.driver_info = (unsigned long) &sierra_net_info_direct_ip},
+	{USB_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */
+	.driver_info = (unsigned long) &sierra_net_info_direct_ip},
 
 	{}, /* last item */
 };
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 9f58330..aba769d 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -796,11 +796,13 @@
 	if (info->manage_power) {
 		retval = info->manage_power(dev, 1);
 		if (retval < 0)
-			goto done;
+			goto done_manage_power_error;
 		usb_autopm_put_interface(dev->intf);
 	}
 	return retval;
 
+done_manage_power_error:
+	clear_bit(EVENT_DEV_OPEN, &dev->flags);
 done:
 	usb_autopm_put_interface(dev->intf);
 done_nopm:
@@ -876,9 +878,9 @@
 {
 	struct usbnet *dev = netdev_priv(net);
 
-	strncpy (info->driver, dev->driver_name, sizeof info->driver);
-	strncpy (info->version, DRIVER_VERSION, sizeof info->version);
-	strncpy (info->fw_version, dev->driver_info->description,
+	strlcpy (info->driver, dev->driver_name, sizeof info->driver);
+	strlcpy (info->version, DRIVER_VERSION, sizeof info->version);
+	strlcpy (info->fw_version, dev->driver_info->description,
 		sizeof info->fw_version);
 	usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
 }
@@ -1202,6 +1204,21 @@
 }
 EXPORT_SYMBOL_GPL(usbnet_start_xmit);
 
+static void rx_alloc_submit(struct usbnet *dev, gfp_t flags)
+{
+	struct urb	*urb;
+	int		i;
+
+	/* don't refill the queue all at once */
+	for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) {
+		urb = usb_alloc_urb(0, flags);
+		if (urb != NULL) {
+			if (rx_submit(dev, urb, flags) == -ENOLINK)
+				return;
+		}
+	}
+}
+
 /*-------------------------------------------------------------------------*/
 
 // tasklet (work deferred from completions, in_irq) or timer
@@ -1241,26 +1258,14 @@
 		   !timer_pending (&dev->delay) &&
 		   !test_bit (EVENT_RX_HALT, &dev->flags)) {
 		int	temp = dev->rxq.qlen;
-		int	qlen = RX_QLEN (dev);
 
-		if (temp < qlen) {
-			struct urb	*urb;
-			int		i;
-
-			// don't refill the queue all at once
-			for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) {
-				urb = usb_alloc_urb (0, GFP_ATOMIC);
-				if (urb != NULL) {
-					if (rx_submit (dev, urb, GFP_ATOMIC) ==
-					    -ENOLINK)
-						return;
-				}
-			}
+		if (temp < RX_QLEN(dev)) {
+			rx_alloc_submit(dev, GFP_ATOMIC);
 			if (temp != dev->rxq.qlen)
 				netif_dbg(dev, link, dev->net,
 					  "rxqlen %d --> %d\n",
 					  temp, dev->rxq.qlen);
-			if (dev->rxq.qlen < qlen)
+			if (dev->rxq.qlen < RX_QLEN(dev))
 				tasklet_schedule (&dev->bh);
 		}
 		if (dev->txq.qlen < TX_QLEN (dev))
@@ -1513,6 +1518,7 @@
 		spin_lock_irq(&dev->txq.lock);
 		/* don't autosuspend while transmitting */
 		if (dev->txq.qlen && PMSG_IS_AUTO(message)) {
+			dev->suspend_count--;
 			spin_unlock_irq(&dev->txq.lock);
 			return -EBUSY;
 		} else {
@@ -1569,6 +1575,13 @@
 		spin_unlock_irq(&dev->txq.lock);
 
 		if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
+			/* handle remote wakeup ASAP */
+			if (!dev->wait &&
+				netif_device_present(dev->net) &&
+				!timer_pending(&dev->delay) &&
+				!test_bit(EVENT_RX_HALT, &dev->flags))
+					rx_alloc_submit(dev, GFP_KERNEL);
+
 			if (!(dev->txq.qlen >= TX_QLEN(dev)))
 				netif_tx_wake_all_queues(dev->net);
 			tasklet_schedule (&dev->bh);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 5214b1e..f18149a 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -42,7 +42,8 @@
 #define VIRTNET_DRIVER_VERSION "1.0.0"
 
 struct virtnet_stats {
-	struct u64_stats_sync syncp;
+	struct u64_stats_sync tx_syncp;
+	struct u64_stats_sync rx_syncp;
 	u64 tx_bytes;
 	u64 tx_packets;
 
@@ -300,10 +301,10 @@
 
 	hdr = skb_vnet_hdr(skb);
 
-	u64_stats_update_begin(&stats->syncp);
+	u64_stats_update_begin(&stats->rx_syncp);
 	stats->rx_bytes += skb->len;
 	stats->rx_packets++;
-	u64_stats_update_end(&stats->syncp);
+	u64_stats_update_end(&stats->rx_syncp);
 
 	if (hdr->hdr.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
 		pr_debug("Needs csum!\n");
@@ -565,10 +566,10 @@
 	while ((skb = virtqueue_get_buf(vi->svq, &len)) != NULL) {
 		pr_debug("Sent skb %p\n", skb);
 
-		u64_stats_update_begin(&stats->syncp);
+		u64_stats_update_begin(&stats->tx_syncp);
 		stats->tx_bytes += skb->len;
 		stats->tx_packets++;
-		u64_stats_update_end(&stats->syncp);
+		u64_stats_update_end(&stats->tx_syncp);
 
 		tot_sgs += skb_vnet_hdr(skb)->num_sg;
 		dev_kfree_skb_any(skb);
@@ -703,12 +704,16 @@
 		u64 tpackets, tbytes, rpackets, rbytes;
 
 		do {
-			start = u64_stats_fetch_begin(&stats->syncp);
+			start = u64_stats_fetch_begin(&stats->tx_syncp);
 			tpackets = stats->tx_packets;
 			tbytes   = stats->tx_bytes;
+		} while (u64_stats_fetch_retry(&stats->tx_syncp, start));
+
+		do {
+			start = u64_stats_fetch_begin(&stats->rx_syncp);
 			rpackets = stats->rx_packets;
 			rbytes   = stats->rx_bytes;
-		} while (u64_stats_fetch_retry(&stats->syncp, start));
+		} while (u64_stats_fetch_retry(&stats->rx_syncp, start));
 
 		tot->rx_packets += rpackets;
 		tot->tx_packets += tpackets;
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 520a4b2..a747c63 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -7233,8 +7233,8 @@
 		}
 	} else {
 		dwrq->flags = 1; /* Should be define'd */
-		memcpy(extra + sizeof(struct sockaddr)*i,
-		       &qual,  sizeof(struct iw_quality)*i);
+		memcpy(extra + sizeof(struct sockaddr) * i, qual,
+		       sizeof(struct iw_quality) * i);
 	}
 	dwrq->length = i;
 
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index c54b7d37..420d69b 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -143,6 +143,7 @@
 	u32 keymax;
 	DECLARE_BITMAP(keymap, ATH_KEYMAX);
 	DECLARE_BITMAP(tkip_keymap, ATH_KEYMAX);
+	DECLARE_BITMAP(ccmp_keymap, ATH_KEYMAX);
 	enum ath_crypt_caps crypt_caps;
 
 	unsigned int clockrate;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index fbaa309..44ad6fe 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1045,11 +1045,11 @@
 
 				ath5k_txbuf_free_skb(ah, bf);
 
-				spin_lock_bh(&ah->txbuflock);
+				spin_lock(&ah->txbuflock);
 				list_move_tail(&bf->list, &ah->txbuf);
 				ah->txbuf_len++;
 				txq->txq_len--;
-				spin_unlock_bh(&ah->txbuflock);
+				spin_unlock(&ah->txbuflock);
 			}
 			txq->link = NULL;
 			txq->txq_poll_mark = false;
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index a277cf6..4866550 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -214,6 +214,7 @@
 	enum ath9k_key_type keytype;
 	u8 keyix;
 	u8 retries;
+	u8 rtscts_rate;
 };
 
 struct ath_buf_state {
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 2b8f61c..abbd6ef 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1496,6 +1496,7 @@
 			priv->num_sta_assoc_vif++ : priv->num_sta_assoc_vif--;
 
 		if (priv->ah->opmode == NL80211_IFTYPE_STATION) {
+			ath9k_htc_choose_set_bssid(priv);
 			if (bss_conf->assoc && (priv->num_sta_assoc_vif == 1))
 				ath9k_htc_start_ani(priv);
 			else if (priv->num_sta_assoc_vif == 0)
@@ -1503,13 +1504,11 @@
 		}
 	}
 
-	if (changed & BSS_CHANGED_BSSID) {
+	if (changed & BSS_CHANGED_IBSS) {
 		if (priv->ah->opmode == NL80211_IFTYPE_ADHOC) {
 			common->curaid = bss_conf->aid;
 			memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
 			ath9k_htc_set_bssid(priv);
-		} else if (priv->ah->opmode == NL80211_IFTYPE_STATION) {
-			ath9k_htc_choose_set_bssid(priv);
 		}
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 7db1890..995ca8e 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -622,7 +622,7 @@
 
 	if (NR_CPUS > 1 && ah->config.serialize_regmode == SER_REG_MODE_AUTO) {
 		if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCI ||
-		    ((AR_SREV_9160(ah) || AR_SREV_9280(ah)) &&
+		    ((AR_SREV_9160(ah) || AR_SREV_9280(ah) || AR_SREV_9287(ah)) &&
 		     !ah->is_pciexpress)) {
 			ah->config.serialize_regmode =
 				SER_REG_MODE_ON;
@@ -784,13 +784,25 @@
 
 u32 ar9003_get_pll_sqsum_dvc(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
+	int i = 0;
+
 	REG_CLR_BIT(ah, PLL3, PLL3_DO_MEAS_MASK);
 	udelay(100);
 	REG_SET_BIT(ah, PLL3, PLL3_DO_MEAS_MASK);
 
-	while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0)
+	while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0) {
+
 		udelay(100);
 
+		if (WARN_ON_ONCE(i >= 100)) {
+			ath_err(common, "PLL4 meaurement not done\n");
+			break;
+		}
+
+		i++;
+	}
+
 	return (REG_READ(ah, PLL3) & SQSUM_DVC_MASK) >> 3;
 }
 EXPORT_SYMBOL(ar9003_get_pll_sqsum_dvc);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 4de4473..dac1a27 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -971,6 +971,15 @@
 					    hw_pll_work.work);
 	u32 pll_sqsum;
 
+	/*
+	 * ensure that the PLL WAR is executed only
+	 * after the STA is associated (or) if the
+	 * beaconing had started in interfaces that
+	 * uses beacons.
+	 */
+	if (!(sc->sc_flags & SC_OP_BEACONS))
+		return;
+
 	if (AR_SREV_9485(sc->sc_ah)) {
 
 		ath9k_ps_wakeup(sc);
@@ -1443,15 +1452,6 @@
 		}
 	}
 
-	if ((ah->opmode == NL80211_IFTYPE_ADHOC) ||
-	    ((vif->type == NL80211_IFTYPE_ADHOC) &&
-	     sc->nvifs > 0)) {
-		ath_err(common, "Cannot create ADHOC interface when other"
-			" interfaces already exist.\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
 	ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type);
 
 	sc->nvifs++;
@@ -1476,15 +1476,6 @@
 	mutex_lock(&sc->mutex);
 	ath9k_ps_wakeup(sc);
 
-	/* See if new interface type is valid. */
-	if ((new_type == NL80211_IFTYPE_ADHOC) &&
-	    (sc->nvifs > 1)) {
-		ath_err(common, "When using ADHOC, it must be the only"
-			" interface.\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
 	if (ath9k_uses_beacons(new_type) &&
 	    !ath9k_uses_beacons(vif->type)) {
 		if (sc->nbcnvifs >= ATH_BCBUF) {
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index e1fcc68..0735aeb 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -695,9 +695,9 @@
 			__skb_unlink(skb, &rx_edma->rx_fifo);
 			list_add_tail(&bf->list, &sc->rx.rxbuf);
 			ath_rx_edma_buf_link(sc, qtype);
-		} else {
-			bf = NULL;
 		}
+
+		bf = NULL;
 	}
 
 	*dest = bf;
@@ -822,7 +822,8 @@
 	 * descriptor does contain a valid key index. This has been observed
 	 * mostly with CCMP encryption.
 	 */
-	if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID)
+	if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID ||
+	    !test_bit(rx_stats->rs_keyix, common->ccmp_keymap))
 		rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
 
 	if (!rx_stats->rs_datalen) {
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index d59dd01..4d57139 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -938,6 +938,7 @@
 	struct ieee80211_tx_rate *rates;
 	const struct ieee80211_rate *rate;
 	struct ieee80211_hdr *hdr;
+	struct ath_frame_info *fi = get_frame_info(bf->bf_mpdu);
 	int i;
 	u8 rix = 0;
 
@@ -948,18 +949,7 @@
 
 	/* set dur_update_en for l-sig computation except for PS-Poll frames */
 	info->dur_update = !ieee80211_is_pspoll(hdr->frame_control);
-
-	/*
-	 * We check if Short Preamble is needed for the CTS rate by
-	 * checking the BSS's global flag.
-	 * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used.
-	 */
-	rate = ieee80211_get_rts_cts_rate(sc->hw, tx_info);
-	info->rtscts_rate = rate->hw_value;
-
-	if (tx_info->control.vif &&
-	    tx_info->control.vif->bss_conf.use_short_preamble)
-		info->rtscts_rate |= rate->hw_value_short;
+	info->rtscts_rate = fi->rtscts_rate;
 
 	for (i = 0; i < 4; i++) {
 		bool is_40, is_sgi, is_sp;
@@ -1001,13 +991,13 @@
 		}
 
 		/* legacy rates */
+		rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx];
 		if ((tx_info->band == IEEE80211_BAND_2GHZ) &&
 		    !(rate->flags & IEEE80211_RATE_ERP_G))
 			phy = WLAN_RC_PHY_CCK;
 		else
 			phy = WLAN_RC_PHY_OFDM;
 
-		rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx];
 		info->rates[i].Rate = rate->hw_value;
 		if (rate->hw_value_short) {
 			if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
@@ -1776,10 +1766,22 @@
 	struct ieee80211_sta *sta = tx_info->control.sta;
 	struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	const struct ieee80211_rate *rate;
 	struct ath_frame_info *fi = get_frame_info(skb);
 	struct ath_node *an = NULL;
 	enum ath9k_key_type keytype;
+	bool short_preamble = false;
 
+	/*
+	 * We check if Short Preamble is needed for the CTS rate by
+	 * checking the BSS's global flag.
+	 * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used.
+	 */
+	if (tx_info->control.vif &&
+	    tx_info->control.vif->bss_conf.use_short_preamble)
+		short_preamble = true;
+
+	rate = ieee80211_get_rts_cts_rate(hw, tx_info);
 	keytype = ath9k_cmn_get_hw_crypto_keytype(skb);
 
 	if (sta)
@@ -1794,6 +1796,9 @@
 		fi->keyix = ATH9K_TXKEYIX_INVALID;
 	fi->keytype = keytype;
 	fi->framelen = framelen;
+	fi->rtscts_rate = rate->hw_value;
+	if (short_preamble)
+		fi->rtscts_rate |= rate->hw_value_short;
 }
 
 u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate)
diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c
index 0e81904..5c54aa4 100644
--- a/drivers/net/wireless/ath/key.c
+++ b/drivers/net/wireless/ath/key.c
@@ -556,6 +556,9 @@
 		return -EIO;
 
 	set_bit(idx, common->keymap);
+	if (key->cipher == WLAN_CIPHER_SUITE_CCMP)
+		set_bit(idx, common->ccmp_keymap);
+
 	if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
 		set_bit(idx + 64, common->keymap);
 		set_bit(idx, common->tkip_keymap);
@@ -582,6 +585,7 @@
 		return;
 
 	clear_bit(key->hw_key_idx, common->keymap);
+	clear_bit(key->hw_key_idx, common->ccmp_keymap);
 	if (key->cipher != WLAN_CIPHER_SUITE_TKIP)
 		return;
 
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 67c13af..c06b6cb 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -877,6 +877,10 @@
 	 * from the mac80211 subsystem. */
 	u16 mac80211_initially_registered_queues;
 
+	/* Set this if we call ieee80211_register_hw() and check if we call
+	 * ieee80211_unregister_hw(). */
+	bool hw_registred;
+
 	/* We can only have one operating interface (802.11 core)
 	 * at a time. General information about this interface follows.
 	 */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 5a39b22..1b988f2 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2437,6 +2437,7 @@
 	err = ieee80211_register_hw(wl->hw);
 	if (err)
 		goto err_one_core_detach;
+	wl->hw_registred = true;
 	b43_leds_register(wl->current_dev);
 	goto out;
 
@@ -3766,7 +3767,7 @@
 	if (prev_status >= B43_STAT_STARTED) {
 		err = b43_wireless_core_start(up_dev);
 		if (err) {
-			b43err(wl, "Fatal: Coult not start device for "
+			b43err(wl, "Fatal: Could not start device for "
 			       "selected %s-GHz band\n",
 			       band_to_string(chan->band));
 			b43_wireless_core_exit(up_dev);
@@ -5299,6 +5300,7 @@
 
 	hw->queues = modparam_qos ? B43_QOS_QUEUE_NUM : 1;
 	wl->mac80211_initially_registered_queues = hw->queues;
+	wl->hw_registred = false;
 	hw->max_rates = 2;
 	SET_IEEE80211_DEV(hw, dev->dev);
 	if (is_valid_ether_addr(sprom->et1mac))
@@ -5370,12 +5372,15 @@
 	 * as the ieee80211 unreg will destroy the workqueue. */
 	cancel_work_sync(&wldev->restart_work);
 
-	/* Restore the queues count before unregistering, because firmware detect
-	 * might have modified it. Restoring is important, so the networking
-	 * stack can properly free resources. */
-	wl->hw->queues = wl->mac80211_initially_registered_queues;
-	b43_leds_stop(wldev);
-	ieee80211_unregister_hw(wl->hw);
+	B43_WARN_ON(!wl);
+	if (wl->current_dev == wldev && wl->hw_registred) {
+		/* Restore the queues count before unregistering, because firmware detect
+		 * might have modified it. Restoring is important, so the networking
+		 * stack can properly free resources. */
+		wl->hw->queues = wl->mac80211_initially_registered_queues;
+		b43_leds_stop(wldev);
+		ieee80211_unregister_hw(wl->hw);
+	}
 
 	b43_one_core_detach(wldev->dev);
 
@@ -5446,7 +5451,7 @@
 	cancel_work_sync(&wldev->restart_work);
 
 	B43_WARN_ON(!wl);
-	if (wl->current_dev == wldev) {
+	if (wl->current_dev == wldev && wl->hw_registred) {
 		/* Restore the queues count before unregistering, because firmware detect
 		 * might have modified it. Restoring is important, so the networking
 		 * stack can properly free resources. */
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index cd9c9bc..eae691e 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2633,7 +2633,7 @@
 	if (prev_status >= B43legacy_STAT_STARTED) {
 		err = b43legacy_wireless_core_start(up_dev);
 		if (err) {
-			b43legacyerr(wl, "Fatal: Coult not start device for "
+			b43legacyerr(wl, "Fatal: Could not start device for "
 			       "newly selected %s-PHY mode\n",
 			       phymode_to_string(new_mode));
 			b43legacy_wireless_core_exit(up_dev);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index e2480d1..8e7e692 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -89,9 +89,9 @@
 	data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
 	brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
 
-	/* redirect, configure ane enable io for interrupt signal */
+	/* redirect, configure and enable io for interrupt signal */
 	data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
-	if (sdiodev->irq_flags | IRQF_TRIGGER_HIGH)
+	if (sdiodev->irq_flags & IRQF_TRIGGER_HIGH)
 		data |= SDIO_SEPINT_ACT_HI;
 	brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
 
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 9cfae0c..95aa8e1 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1903,14 +1903,6 @@
 	netif_stop_queue(priv->net_dev);
 }
 
-/* Called by register_netdev() */
-static int ipw2100_net_init(struct net_device *dev)
-{
-	struct ipw2100_priv *priv = libipw_priv(dev);
-
-	return ipw2100_up(priv, 1);
-}
-
 static int ipw2100_wdev_init(struct net_device *dev)
 {
 	struct ipw2100_priv *priv = libipw_priv(dev);
@@ -6087,7 +6079,6 @@
 	.ndo_stop		= ipw2100_close,
 	.ndo_start_xmit		= libipw_xmit,
 	.ndo_change_mtu		= libipw_change_mtu,
-	.ndo_init		= ipw2100_net_init,
 	.ndo_tx_timeout		= ipw2100_tx_timeout,
 	.ndo_set_mac_address	= ipw2100_set_address,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -6329,6 +6320,10 @@
 	printk(KERN_INFO DRV_NAME
 	       ": Detected Intel PRO/Wireless 2100 Network Connection\n");
 
+	err = ipw2100_up(priv, 1);
+	if (err)
+		goto fail;
+
 	err = ipw2100_wdev_init(dev);
 	if (err)
 		goto fail;
@@ -6338,12 +6333,7 @@
 	 * network device we would call ipw2100_up.  This introduced a race
 	 * condition with newer hotplug configurations (network was coming
 	 * up and making calls before the device was initialized).
-	 *
-	 * If we called ipw2100_up before we registered the device, then the
-	 * device name wasn't registered.  So, we instead use the net_dev->init
-	 * member to call a function that then just turns and calls ipw2100_up.
-	 * net_dev->init is called after name allocation but before the
-	 * notifier chain is called */
+	 */
 	err = register_netdev(dev);
 	if (err) {
 		printk(KERN_WARNING DRV_NAME
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 19f7ee8..e5e8ada 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -35,17 +35,20 @@
 #define IWL6000_UCODE_API_MAX 6
 #define IWL6050_UCODE_API_MAX 5
 #define IWL6000G2_UCODE_API_MAX 6
+#define IWL6035_UCODE_API_MAX 6
 
 /* Oldest version we won't warn about */
 #define IWL6000_UCODE_API_OK 4
 #define IWL6000G2_UCODE_API_OK 5
 #define IWL6050_UCODE_API_OK 5
 #define IWL6000G2B_UCODE_API_OK 6
+#define IWL6035_UCODE_API_OK 6
 
 /* Lowest firmware API version supported */
 #define IWL6000_UCODE_API_MIN 4
 #define IWL6050_UCODE_API_MIN 4
-#define IWL6000G2_UCODE_API_MIN 4
+#define IWL6000G2_UCODE_API_MIN 5
+#define IWL6035_UCODE_API_MIN 6
 
 /* EEPROM versions */
 #define EEPROM_6000_TX_POWER_VERSION	(4)
@@ -227,9 +230,25 @@
 	IWL_DEVICE_6030,
 };
 
+#define IWL_DEVICE_6035						\
+	.fw_name_pre = IWL6030_FW_PRE,				\
+	.ucode_api_max = IWL6035_UCODE_API_MAX,			\
+	.ucode_api_ok = IWL6035_UCODE_API_OK,			\
+	.ucode_api_min = IWL6035_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_6030,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.eeprom_ver = EEPROM_6030_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\
+	.base_params = &iwl6000_g2_base_params,			\
+	.bt_params = &iwl6000_bt_params,			\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.adv_pm = true
+
 const struct iwl_cfg iwl6035_2agn_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6235 AGN",
-	IWL_DEVICE_6030,
+	IWL_DEVICE_6035,
 	.ht_params = &iwl6000_ht_params,
 };
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
index aea07aa..eb6a8ea 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
@@ -1267,7 +1267,7 @@
 		key_flags |= STA_KEY_MULTICAST_MSK;
 
 	sta_cmd.key.key_flags = key_flags;
-	sta_cmd.key.key_offset = WEP_INVALID_OFFSET;
+	sta_cmd.key.key_offset = keyconf->hw_key_idx;
 	sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK;
 	sta_cmd.mode = STA_CONTROL_MODIFY_MSK;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index e7c157e..7f97dec 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -2239,6 +2239,7 @@
 	return count;
 }
 
+#ifdef CONFIG_IWLWIFI_DEBUG
 static ssize_t iwl_dbgfs_log_event_read(struct file *file,
 					 char __user *user_buf,
 					 size_t count, loff_t *ppos)
@@ -2276,6 +2277,7 @@
 
 	return count;
 }
+#endif
 
 static ssize_t iwl_dbgfs_calib_disabled_read(struct file *file,
 					 char __user *user_buf,
@@ -2345,7 +2347,9 @@
 DEBUGFS_READ_WRITE_FILE_OPS(protection_mode);
 DEBUGFS_READ_FILE_OPS(reply_tx_error);
 DEBUGFS_WRITE_FILE_OPS(echo_test);
+#ifdef CONFIG_IWLWIFI_DEBUG
 DEBUGFS_READ_WRITE_FILE_OPS(log_event);
+#endif
 DEBUGFS_READ_WRITE_FILE_OPS(calib_disabled);
 
 /*
@@ -2405,7 +2409,9 @@
 	DEBUGFS_ADD_FILE(rxon_flags, dir_debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(rxon_filter_flags, dir_debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(echo_test, dir_debug, S_IWUSR);
+#ifdef CONFIG_IWLWIFI_DEBUG
 	DEBUGFS_ADD_FILE(log_event, dir_debug, S_IWUSR | S_IRUSR);
+#endif
 
 	if (iwl_advanced_bt_coexist(priv))
 		DEBUGFS_ADD_FILE(bt_traffic, dir_debug, S_IRUSR);
diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c
index d742900..fac67a5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.c
@@ -861,13 +861,18 @@
 
 	/* We have our copies now, allow OS release its copies */
 	release_firmware(ucode_raw);
-	complete(&drv->request_firmware_complete);
 
 	drv->op_mode = iwl_dvm_ops.start(drv->trans, drv->cfg, &drv->fw);
 
 	if (!drv->op_mode)
-		goto out_free_fw;
+		goto out_unbind;
 
+	/*
+	 * Complete the firmware request last so that
+	 * a driver unbind (stop) doesn't run while we
+	 * are doing the start() above.
+	 */
+	complete(&drv->request_firmware_complete);
 	return;
 
  try_again:
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 50c5891..b8e2b22 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -568,28 +568,28 @@
  * iwl_get_max_txpower_avg - get the highest tx power from all chains.
  *     find the highest tx power from all chains for the channel
  */
-static s8 iwl_get_max_txpower_avg(const struct iwl_cfg *cfg,
+static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
 		struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
 		int element, s8 *max_txpower_in_half_dbm)
 {
 	s8 max_txpower_avg = 0; /* (dBm) */
 
 	/* Take the highest tx power from any valid chains */
-	if ((cfg->valid_tx_ant & ANT_A) &&
+	if ((priv->hw_params.valid_tx_ant & ANT_A) &&
 	    (enhanced_txpower[element].chain_a_max > max_txpower_avg))
 		max_txpower_avg = enhanced_txpower[element].chain_a_max;
-	if ((cfg->valid_tx_ant & ANT_B) &&
+	if ((priv->hw_params.valid_tx_ant & ANT_B) &&
 	    (enhanced_txpower[element].chain_b_max > max_txpower_avg))
 		max_txpower_avg = enhanced_txpower[element].chain_b_max;
-	if ((cfg->valid_tx_ant & ANT_C) &&
+	if ((priv->hw_params.valid_tx_ant & ANT_C) &&
 	    (enhanced_txpower[element].chain_c_max > max_txpower_avg))
 		max_txpower_avg = enhanced_txpower[element].chain_c_max;
-	if (((cfg->valid_tx_ant == ANT_AB) |
-	    (cfg->valid_tx_ant == ANT_BC) |
-	    (cfg->valid_tx_ant == ANT_AC)) &&
+	if (((priv->hw_params.valid_tx_ant == ANT_AB) |
+	    (priv->hw_params.valid_tx_ant == ANT_BC) |
+	    (priv->hw_params.valid_tx_ant == ANT_AC)) &&
 	    (enhanced_txpower[element].mimo2_max > max_txpower_avg))
 		max_txpower_avg =  enhanced_txpower[element].mimo2_max;
-	if ((cfg->valid_tx_ant == ANT_ABC) &&
+	if ((priv->hw_params.valid_tx_ant == ANT_ABC) &&
 	    (enhanced_txpower[element].mimo3_max > max_txpower_avg))
 		max_txpower_avg = enhanced_txpower[element].mimo3_max;
 
@@ -691,7 +691,7 @@
 				 ((txp->delta_20_in_40 & 0xf0) >> 4),
 				 (txp->delta_20_in_40 & 0x0f));
 
-		max_txp_avg = iwl_get_max_txpower_avg(priv->cfg, txp_array, idx,
+		max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx,
 						      &max_txp_avg_halfdbm);
 
 		/*
diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
index ab2f4d75..0136803 100644
--- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c
+++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
@@ -199,6 +199,7 @@
 			    WIPHY_FLAG_DISABLE_BEACON_HINTS |
 			    WIPHY_FLAG_IBSS_RSN;
 
+#ifdef CONFIG_PM_SLEEP
 	if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len &&
 	    priv->trans->ops->wowlan_suspend &&
 	    device_can_wakeup(priv->trans->dev)) {
@@ -217,6 +218,7 @@
 		hw->wiphy->wowlan.pattern_max_len =
 					IWLAGN_WOWLAN_MAX_PATTERN_LEN;
 	}
+#endif
 
 	if (iwlwifi_mod_params.power_save)
 		hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
@@ -249,6 +251,7 @@
 	ret = ieee80211_register_hw(priv->hw);
 	if (ret) {
 		IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
+		iwl_leds_exit(priv);
 		return ret;
 	}
 	priv->mac80211_registered = 1;
@@ -793,6 +796,18 @@
 	switch (op) {
 	case ADD:
 		ret = iwlagn_mac_sta_add(hw, vif, sta);
+		if (ret)
+			break;
+		/*
+		 * Clear the in-progress flag, the AP station entry was added
+		 * but we'll initialize LQ only when we've associated (which
+		 * would also clear the in-progress flag). This is necessary
+		 * in case we never initialize LQ because association fails.
+		 */
+		spin_lock_bh(&priv->sta_lock);
+		priv->stations[iwl_sta_id(sta)].used &=
+			~IWL_STA_UCODE_INPROGRESS;
+		spin_unlock_bh(&priv->sta_lock);
 		break;
 	case REMOVE:
 		ret = iwlagn_mac_sta_remove(hw, vif, sta);
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 3b106929..dfd5466 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -224,6 +224,7 @@
 #define SCD_TXFACT		(SCD_BASE + 0x10)
 #define SCD_ACTIVE		(SCD_BASE + 0x14)
 #define SCD_QUEUECHAIN_SEL	(SCD_BASE + 0xe8)
+#define SCD_CHAINEXT_EN		(SCD_BASE + 0x244)
 #define SCD_AGGR_SEL		(SCD_BASE + 0x248)
 #define SCD_INTERRUPT_MASK	(SCD_BASE + 0x108)
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index ec6fb39..79c6b91 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -1058,6 +1058,11 @@
 	iwl_write_prph(trans, SCD_DRAM_BASE_ADDR,
 		       trans_pcie->scd_bc_tbls.dma >> 10);
 
+	/* The chain extension of the SCD doesn't work well. This feature is
+	 * enabled by default by the HW, so we need to disable it manually.
+	 */
+	iwl_write_prph(trans, SCD_CHAINEXT_EN, 0);
+
 	/* Enable DMA channel */
 	for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++)
 		iwl_write_direct32(trans, FH_TCSR_CHNL_TX_CONFIG_REG(chan),
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index fb787df..a0b7cfd 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1555,6 +1555,7 @@
 			hdr = (struct ieee80211_hdr *) skb->data;
 			mac80211_hwsim_monitor_ack(data2->hw, hdr->addr2);
 		}
+		txi->flags |= IEEE80211_TX_STAT_ACK;
 	}
 	ieee80211_tx_status_irqsafe(data2->hw, skb);
 	return 0;
@@ -1721,6 +1722,24 @@
 		       "unregister family %i\n", ret);
 }
 
+static const struct ieee80211_iface_limit hwsim_if_limits[] = {
+	{ .max = 1, .types = BIT(NL80211_IFTYPE_ADHOC) },
+	{ .max = 2048,  .types = BIT(NL80211_IFTYPE_STATION) |
+				 BIT(NL80211_IFTYPE_P2P_CLIENT) |
+#ifdef CONFIG_MAC80211_MESH
+				 BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+				 BIT(NL80211_IFTYPE_AP) |
+				 BIT(NL80211_IFTYPE_P2P_GO) },
+};
+
+static const struct ieee80211_iface_combination hwsim_if_comb = {
+	.limits = hwsim_if_limits,
+	.n_limits = ARRAY_SIZE(hwsim_if_limits),
+	.max_interfaces = 2048,
+	.num_different_channels = 1,
+};
+
 static int __init init_mac80211_hwsim(void)
 {
 	int i, err = 0;
@@ -1782,6 +1801,9 @@
 		hw->wiphy->n_addresses = 2;
 		hw->wiphy->addresses = data->addresses;
 
+		hw->wiphy->iface_combinations = &hwsim_if_comb;
+		hw->wiphy->n_iface_combinations = 1;
+
 		if (fake_hw_scan) {
 			hw->wiphy->max_scan_ssids = 255;
 			hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index 9c44088..900ee12 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -256,7 +256,8 @@
 	else
 		last_seq = priv->rx_seq[tid];
 
-	if (last_seq >= new_node->start_win)
+	if (last_seq != MWIFIEX_DEF_11N_RX_SEQ_NUM &&
+	    last_seq >= new_node->start_win)
 		new_node->start_win = last_seq + 1;
 
 	new_node->win_size = win_size;
@@ -596,5 +597,5 @@
 	spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 
 	INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr);
-	memset(priv->rx_seq, 0, sizeof(priv->rx_seq));
+	mwifiex_reset_11n_rx_seq_num(priv);
 }
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.h b/drivers/net/wireless/mwifiex/11n_rxreorder.h
index f1bffeb..6c9815a 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.h
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.h
@@ -37,6 +37,13 @@
 
 #define ADDBA_RSP_STATUS_ACCEPT 0
 
+#define MWIFIEX_DEF_11N_RX_SEQ_NUM	0xffff
+
+static inline void mwifiex_reset_11n_rx_seq_num(struct mwifiex_private *priv)
+{
+	memset(priv->rx_seq, 0xff, sizeof(priv->rx_seq));
+}
+
 int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *,
 			       u16 seqNum,
 			       u16 tid, u8 *ta,
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 8767144..ce61b6f 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -948,6 +948,19 @@
 		bss_cfg->ssid.ssid_len = params->ssid_len;
 	}
 
+	switch (params->hidden_ssid) {
+	case NL80211_HIDDEN_SSID_NOT_IN_USE:
+		bss_cfg->bcast_ssid_ctl = 1;
+		break;
+	case NL80211_HIDDEN_SSID_ZERO_LEN:
+		bss_cfg->bcast_ssid_ctl = 0;
+		break;
+	case NL80211_HIDDEN_SSID_ZERO_CONTENTS:
+		/* firmware doesn't support this type of hidden SSID */
+	default:
+		return -EINVAL;
+	}
+
 	if (mwifiex_set_secure_params(priv, bss_cfg, params)) {
 		kfree(bss_cfg);
 		wiphy_err(wiphy, "Failed to parse secuirty parameters!\n");
@@ -1471,7 +1484,7 @@
 	struct wireless_dev *wdev;
 
 	if (!adapter)
-		return NULL;
+		return ERR_PTR(-EFAULT);
 
 	switch (type) {
 	case NL80211_IFTYPE_UNSPECIFIED:
@@ -1481,12 +1494,12 @@
 		if (priv->bss_mode) {
 			wiphy_err(wiphy,
 				  "cannot create multiple sta/adhoc ifaces\n");
-			return NULL;
+			return ERR_PTR(-EINVAL);
 		}
 
 		wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
 		if (!wdev)
-			return NULL;
+			return ERR_PTR(-ENOMEM);
 
 		wdev->wiphy = wiphy;
 		priv->wdev = wdev;
@@ -1509,12 +1522,12 @@
 
 		if (priv->bss_mode) {
 			wiphy_err(wiphy, "Can't create multiple AP interfaces");
-			return NULL;
+			return ERR_PTR(-EINVAL);
 		}
 
 		wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
 		if (!wdev)
-			return NULL;
+			return ERR_PTR(-ENOMEM);
 
 		priv->wdev = wdev;
 		wdev->wiphy = wiphy;
@@ -1531,14 +1544,15 @@
 		break;
 	default:
 		wiphy_err(wiphy, "type not supported\n");
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	dev = alloc_netdev_mq(sizeof(struct mwifiex_private *), name,
 			      ether_setup, 1);
 	if (!dev) {
 		wiphy_err(wiphy, "no memory available for netdevice\n");
-		goto error;
+		priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	mwifiex_init_priv_params(priv, dev);
@@ -1569,7 +1583,9 @@
 	/* Register network device */
 	if (register_netdevice(dev)) {
 		wiphy_err(wiphy, "cannot register virtual network device\n");
-		goto error;
+		free_netdev(dev);
+		priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
+		return ERR_PTR(-EFAULT);
 	}
 
 	sema_init(&priv->async_sem, 1);
@@ -1581,12 +1597,6 @@
 	mwifiex_dev_debugfs_init(priv);
 #endif
 	return dev;
-error:
-	if (dev && (dev->reg_state == NETREG_UNREGISTERED))
-		free_netdev(dev);
-	priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
-
-	return NULL;
 }
 EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf);
 
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 9f674bb..561452a 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -122,6 +122,7 @@
 #define TLV_TYPE_CHANNELBANDLIST    (PROPRIETARY_TLV_BASE_ID + 42)
 #define TLV_TYPE_UAP_BEACON_PERIOD  (PROPRIETARY_TLV_BASE_ID + 44)
 #define TLV_TYPE_UAP_DTIM_PERIOD    (PROPRIETARY_TLV_BASE_ID + 45)
+#define TLV_TYPE_UAP_BCAST_SSID     (PROPRIETARY_TLV_BASE_ID + 48)
 #define TLV_TYPE_UAP_RTS_THRESHOLD  (PROPRIETARY_TLV_BASE_ID + 51)
 #define TLV_TYPE_UAP_WPA_PASSPHRASE (PROPRIETARY_TLV_BASE_ID + 60)
 #define TLV_TYPE_UAP_ENCRY_PROTOCOL (PROPRIETARY_TLV_BASE_ID + 64)
@@ -1209,6 +1210,11 @@
 	u8 ssid[0];
 } __packed;
 
+struct host_cmd_tlv_bcast_ssid {
+	struct host_cmd_tlv tlv;
+	u8 bcast_ctl;
+} __packed;
+
 struct host_cmd_tlv_beacon_period {
 	struct host_cmd_tlv tlv;
 	__le16 period;
diff --git a/drivers/net/wireless/mwifiex/ie.c b/drivers/net/wireless/mwifiex/ie.c
index ceb82cd..383820a 100644
--- a/drivers/net/wireless/mwifiex/ie.c
+++ b/drivers/net/wireless/mwifiex/ie.c
@@ -213,6 +213,7 @@
 		/* save assoc resp ie index after auto-indexing */
 		*assoc_idx = *((u16 *)pos);
 
+	kfree(ap_custom_ie);
 	return ret;
 }
 
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index e037747..fc8a9bf 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -978,10 +978,10 @@
 		dev_dbg(adapter->dev, "info: --- Rx: Event ---\n");
 		adapter->event_cause = *(u32 *) skb->data;
 
-		skb_pull(skb, MWIFIEX_EVENT_HEADER_LEN);
-
 		if ((skb->len > 0) && (skb->len  < MAX_EVENT_SIZE))
-			memcpy(adapter->event_body, skb->data, skb->len);
+			memcpy(adapter->event_body,
+			       skb->data + MWIFIEX_EVENT_HEADER_LEN,
+			       skb->len);
 
 		/* event cause has been saved to adapter->event_cause */
 		adapter->event_received = true;
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index 4ace5a3..11e731f 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -406,9 +406,9 @@
 		break;
 
 	case EVENT_UAP_STA_ASSOC:
-		skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER);
 		memset(&sinfo, 0, sizeof(sinfo));
-		event = (struct mwifiex_assoc_event *)adapter->event_skb->data;
+		event = (struct mwifiex_assoc_event *)
+			(adapter->event_body + MWIFIEX_UAP_EVENT_EXTRA_HEADER);
 		if (le16_to_cpu(event->type) == TLV_TYPE_UAP_MGMT_FRAME) {
 			len = -1;
 
@@ -433,9 +433,8 @@
 				 GFP_KERNEL);
 		break;
 	case EVENT_UAP_STA_DEAUTH:
-		skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER);
-		cfg80211_del_sta(priv->netdev, adapter->event_skb->data,
-				 GFP_KERNEL);
+		cfg80211_del_sta(priv->netdev, adapter->event_body +
+				 MWIFIEX_UAP_EVENT_EXTRA_HEADER, GFP_KERNEL);
 		break;
 	case EVENT_UAP_BSS_IDLE:
 		priv->media_connected = false;
diff --git a/drivers/net/wireless/mwifiex/txrx.c b/drivers/net/wireless/mwifiex/txrx.c
index e2faec4..cecb272 100644
--- a/drivers/net/wireless/mwifiex/txrx.c
+++ b/drivers/net/wireless/mwifiex/txrx.c
@@ -161,15 +161,11 @@
 		goto done;
 
 	for (i = 0; i < adapter->priv_num; i++) {
-
 		tpriv = adapter->priv[i];
 
-		if ((GET_BSS_ROLE(tpriv) == MWIFIEX_BSS_ROLE_STA) &&
-		    (tpriv->media_connected)) {
-			if (netif_queue_stopped(tpriv->netdev))
-				mwifiex_wake_up_net_dev_queue(tpriv->netdev,
-							      adapter);
-		}
+		if (tpriv->media_connected &&
+		    netif_queue_stopped(tpriv->netdev))
+			mwifiex_wake_up_net_dev_queue(tpriv->netdev, adapter);
 	}
 done:
 	dev_kfree_skb_any(skb);
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index 76dfbc4..89f9a2a 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -27,6 +27,17 @@
 			      struct cfg80211_ap_settings *params) {
 	int i;
 
+	if (!params->privacy) {
+		bss_config->protocol = PROTOCOL_NO_SECURITY;
+		bss_config->key_mgmt = KEY_MGMT_NONE;
+		bss_config->wpa_cfg.length = 0;
+		priv->sec_info.wep_enabled = 0;
+		priv->sec_info.wpa_enabled = 0;
+		priv->sec_info.wpa2_enabled = 0;
+
+		return 0;
+	}
+
 	switch (params->auth_type) {
 	case NL80211_AUTHTYPE_OPEN_SYSTEM:
 		bss_config->auth_mode = WLAN_AUTH_OPEN;
@@ -132,6 +143,7 @@
 	struct host_cmd_tlv_dtim_period *dtim_period;
 	struct host_cmd_tlv_beacon_period *beacon_period;
 	struct host_cmd_tlv_ssid *ssid;
+	struct host_cmd_tlv_bcast_ssid *bcast_ssid;
 	struct host_cmd_tlv_channel_band *chan_band;
 	struct host_cmd_tlv_frag_threshold *frag_threshold;
 	struct host_cmd_tlv_rts_threshold *rts_threshold;
@@ -153,6 +165,14 @@
 		cmd_size += sizeof(struct host_cmd_tlv) +
 			    bss_cfg->ssid.ssid_len;
 		tlv += sizeof(struct host_cmd_tlv) + bss_cfg->ssid.ssid_len;
+
+		bcast_ssid = (struct host_cmd_tlv_bcast_ssid *)tlv;
+		bcast_ssid->tlv.type = cpu_to_le16(TLV_TYPE_UAP_BCAST_SSID);
+		bcast_ssid->tlv.len =
+				cpu_to_le16(sizeof(bcast_ssid->bcast_ctl));
+		bcast_ssid->bcast_ctl = bss_cfg->bcast_ssid_ctl;
+		cmd_size += sizeof(struct host_cmd_tlv_bcast_ssid);
+		tlv += sizeof(struct host_cmd_tlv_bcast_ssid);
 	}
 	if (bss_cfg->channel && bss_cfg->channel <= MAX_CHANNEL_BAND_BG) {
 		chan_band = (struct host_cmd_tlv_channel_band *)tlv;
@@ -416,6 +436,7 @@
 	if (!bss_cfg)
 		return -ENOMEM;
 
+	mwifiex_set_sys_config_invalid_data(bss_cfg);
 	bss_cfg->band_cfg = BAND_CONFIG_MANUAL;
 	bss_cfg->channel = channel;
 
diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c
index 49ebf20..22a5916 100644
--- a/drivers/net/wireless/mwifiex/usb.c
+++ b/drivers/net/wireless/mwifiex/usb.c
@@ -49,6 +49,7 @@
 	struct device *dev = adapter->dev;
 	u32 recv_type;
 	__le32 tmp;
+	int ret;
 
 	if (adapter->hs_activated)
 		mwifiex_process_hs_config(adapter);
@@ -69,16 +70,19 @@
 		case MWIFIEX_USB_TYPE_CMD:
 			if (skb->len > MWIFIEX_SIZE_OF_CMD_BUFFER) {
 				dev_err(dev, "CMD: skb->len too large\n");
-				return -1;
+				ret = -1;
+				goto exit_restore_skb;
 			} else if (!adapter->curr_cmd) {
 				dev_dbg(dev, "CMD: no curr_cmd\n");
 				if (adapter->ps_state == PS_STATE_SLEEP_CFM) {
 					mwifiex_process_sleep_confirm_resp(
 							adapter, skb->data,
 							skb->len);
-					return 0;
+					ret = 0;
+					goto exit_restore_skb;
 				}
-				return -1;
+				ret = -1;
+				goto exit_restore_skb;
 			}
 
 			adapter->curr_cmd->resp_skb = skb;
@@ -87,20 +91,22 @@
 		case MWIFIEX_USB_TYPE_EVENT:
 			if (skb->len < sizeof(u32)) {
 				dev_err(dev, "EVENT: skb->len too small\n");
-				return -1;
+				ret = -1;
+				goto exit_restore_skb;
 			}
 			skb_copy_from_linear_data(skb, &tmp, sizeof(u32));
 			adapter->event_cause = le32_to_cpu(tmp);
-			skb_pull(skb, sizeof(u32));
 			dev_dbg(dev, "event_cause %#x\n", adapter->event_cause);
 
 			if (skb->len > MAX_EVENT_SIZE) {
 				dev_err(dev, "EVENT: event body too large\n");
-				return -1;
+				ret = -1;
+				goto exit_restore_skb;
 			}
 
-			skb_copy_from_linear_data(skb, adapter->event_body,
-						  skb->len);
+			memcpy(adapter->event_body, skb->data +
+			       MWIFIEX_EVENT_HEADER_LEN, skb->len);
+
 			adapter->event_received = true;
 			adapter->event_skb = skb;
 			break;
@@ -124,6 +130,12 @@
 	}
 
 	return -EINPROGRESS;
+
+exit_restore_skb:
+	/* The buffer will be reused for further cmds/events */
+	skb_push(skb, INTF_HEADER_LEN);
+
+	return ret;
 }
 
 static void mwifiex_usb_rx_complete(struct urb *urb)
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index f3fc655..3fa4d41 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -404,6 +404,8 @@
 		priv->add_ba_param.tx_win_size = MWIFIEX_AMPDU_DEF_TXWINSIZE;
 		priv->add_ba_param.rx_win_size = MWIFIEX_AMPDU_DEF_RXWINSIZE;
 
+		mwifiex_reset_11n_rx_seq_num(priv);
+
 		atomic_set(&priv->wmm.tx_pkts_queued, 0);
 		atomic_set(&priv->wmm.highest_queued_prio, HIGH_PRIO_TID);
 	}
@@ -1221,6 +1223,7 @@
 
 	if (!ptr->is_11n_enabled ||
 	    mwifiex_is_ba_stream_setup(priv, ptr, tid) ||
+	    priv->wps.session_enable ||
 	    ((priv->sec_info.wpa_enabled ||
 	      priv->sec_info.wpa2_enabled) &&
 	     !priv->wpa_is_gtk_set)) {
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 2e9e6af..dfcd02a 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -2110,7 +2110,7 @@
 	while (check_bssid_list_item(bssid, bssid_len, buf, len)) {
 		if (rndis_bss_info_update(usbdev, bssid) && match_bssid &&
 		    matched) {
-			if (!ether_addr_equal(bssid->mac, match_bssid))
+			if (ether_addr_equal(bssid->mac, match_bssid))
 				*matched = true;
 		}
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index ca36ccc..8f75402 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -396,8 +396,7 @@
 	 * for hardware which doesn't support hardware
 	 * sequence counting.
 	 */
-	spinlock_t seqlock;
-	u16 seqno;
+	atomic_t seqno;
 };
 
 static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index b49773ef..dd24b26 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -277,7 +277,6 @@
 	else
 		rt2x00dev->intf_sta_count++;
 
-	spin_lock_init(&intf->seqlock);
 	mutex_init(&intf->beacon_skb_mutex);
 	intf->beacon = entry;
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 4c662ec..2fd8301 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -207,6 +207,7 @@
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
+	u16 seqno;
 
 	if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
 		return;
@@ -238,15 +239,13 @@
 	 * sequence counting per-frame, since those will override the
 	 * sequence counter given by mac80211.
 	 */
-	spin_lock(&intf->seqlock);
-
 	if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
-		intf->seqno += 0x10;
+		seqno = atomic_add_return(0x10, &intf->seqno);
+	else
+		seqno = atomic_read(&intf->seqno);
+
 	hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
-	hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
-
-	spin_unlock(&intf->seqlock);
-
+	hdr->seq_ctrl |= cpu_to_le16(seqno);
 }
 
 static void rt2x00queue_create_tx_descriptor_plcp(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rtl818x/rtl8187/leds.c b/drivers/net/wireless/rtl818x/rtl8187/leds.c
index 2e0de2f..c2d5b49 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/leds.c
@@ -117,7 +117,7 @@
 			radio_on = true;
 		} else if (radio_on) {
 			radio_on = false;
-			cancel_delayed_work_sync(&priv->led_on);
+			cancel_delayed_work(&priv->led_on);
 			ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
 		}
 	} else if (radio_on) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index d228358..9970c2b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -301,9 +301,11 @@
 	{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
 	{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
 	{RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
+	{RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
 	{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
 	{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
 	{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
+	{RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/
 	/* HP - Lite-On ,8188CUS Slim Combo */
 	{RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)},
 	{RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */
@@ -346,6 +348,7 @@
 	{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
 	{RTL_USB_DEVICE(0x0846, 0x9021, rtl92cu_hal_cfg)}, /*Netgear-Sercomm*/
 	{RTL_USB_DEVICE(0x0b05, 0x17ab, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
+	{RTL_USB_DEVICE(0x0bda, 0x8186, rtl92cu_hal_cfg)}, /*Realtek 92CE-VAU*/
 	{RTL_USB_DEVICE(0x0df6, 0x0061, rtl92cu_hal_cfg)}, /*Sitecom-Edimax*/
 	{RTL_USB_DEVICE(0x0e66, 0x0019, rtl92cu_hal_cfg)}, /*Hawking-Edimax*/
 	{RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/
diff --git a/drivers/net/wireless/ti/wl1251/acx.c b/drivers/net/wireless/ti/wl1251/acx.c
index ad87a1a..db6430c 100644
--- a/drivers/net/wireless/ti/wl1251/acx.c
+++ b/drivers/net/wireless/ti/wl1251/acx.c
@@ -869,7 +869,7 @@
 	}
 
 	*mactime = tsf_info->current_tsf_lsb |
-		(tsf_info->current_tsf_msb << 31);
+		((u64)tsf_info->current_tsf_msb << 32);
 
 out:
 	kfree(tsf_info);
diff --git a/drivers/net/wireless/ti/wl1251/event.c b/drivers/net/wireless/ti/wl1251/event.c
index 9f15cca..5ec50a4 100644
--- a/drivers/net/wireless/ti/wl1251/event.c
+++ b/drivers/net/wireless/ti/wl1251/event.c
@@ -76,8 +76,7 @@
 		}
 	}
 
-	if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID &&
-	    wl->station_mode != STATION_ACTIVE_MODE) {
+	if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID) {
 		wl1251_debug(DEBUG_EVENT, "SYNCHRONIZATION_TIMEOUT_EVENT");
 
 		/* indicate to the stack, that beacons have been lost */
diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index 87f6305b..567660c 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -73,6 +73,8 @@
 	spi_sync(wl_to_spi(wl), &m);
 
 	wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
+
+	kfree(cmd);
 }
 
 static void wl1251_spi_wake(struct wl1251 *wl)
@@ -127,6 +129,8 @@
 	spi_sync(wl_to_spi(wl), &m);
 
 	wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
+
+	kfree(cmd);
 }
 
 static void wl1251_spi_reset_wake(struct wl1251 *wl)
diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig
index 54156b0..d7b907e 100644
--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
@@ -1,7 +1,6 @@
 config WLCORE
 	tristate "TI wlcore support"
 	depends on WL_TI && GENERIC_HARDIRQS && MAC80211
-	depends on INET
 	select FW_LOADER
 	---help---
 	  This module contains the main code for TI WLAN chips.  It abstracts
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 2027afe..3089990 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1935,14 +1935,14 @@
 
 	dev_dbg(&dev->dev, "%s\n", dev->nodename);
 
-	unregister_netdev(info->netdev);
-
 	xennet_disconnect_backend(info);
 
-	del_timer_sync(&info->rx_refill_timer);
-
 	xennet_sysfs_delif(info->netdev);
 
+	unregister_netdev(info->netdev);
+
+	del_timer_sync(&info->rx_refill_timer);
+
 	free_percpu(info->stats);
 
 	free_netdev(info->netdev);
diff --git a/drivers/of/base.c b/drivers/of/base.c
index d9bfd49..eada3f4 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -511,6 +511,22 @@
 }
 EXPORT_SYMBOL(of_find_node_with_property);
 
+static const struct of_device_id *of_match_compat(const struct of_device_id *matches,
+						  const char *compat)
+{
+	while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
+		const char *cp = matches->compatible;
+		int len = strlen(cp);
+
+		if (len > 0 && of_compat_cmp(compat, cp, len) == 0)
+			return matches;
+
+		matches++;
+	}
+
+	return NULL;
+}
+
 /**
  * of_match_node - Tell if an device_node has a matching of_match structure
  *	@matches:	array of of device match structures to search in
@@ -521,9 +537,18 @@
 const struct of_device_id *of_match_node(const struct of_device_id *matches,
 					 const struct device_node *node)
 {
+	struct property *prop;
+	const char *cp;
+
 	if (!matches)
 		return NULL;
 
+	of_property_for_each_string(node, "compatible", prop, cp) {
+		const struct of_device_id *match = of_match_compat(matches, cp);
+		if (match)
+			return match;
+	}
+
 	while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
 		int match = 1;
 		if (matches->name[0])
@@ -532,10 +557,7 @@
 		if (matches->type[0])
 			match &= node->type
 				&& !strcmp(matches->type, node->type);
-		if (matches->compatible[0])
-			match &= of_device_is_compatible(node,
-						matches->compatible);
-		if (match)
+		if (match && !matches->compatible[0])
 			return matches;
 		matches++;
 	}
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 343ad29..3132ea0 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -462,4 +462,5 @@
 	of_node_put(root);
 	return rc;
 }
+EXPORT_SYMBOL_GPL(of_platform_populate);
 #endif /* CONFIG_OF_ADDRESS */
diff --git a/drivers/oprofile/oprofile_perf.c b/drivers/oprofile/oprofile_perf.c
index da14432..efc4b7f 100644
--- a/drivers/oprofile/oprofile_perf.c
+++ b/drivers/oprofile/oprofile_perf.c
@@ -25,7 +25,7 @@
 static DEFINE_MUTEX(oprofile_perf_mutex);
 
 static struct op_counter_config *counter_config;
-static struct perf_event **perf_events[nr_cpumask_bits];
+static struct perf_event **perf_events[NR_CPUS];
 static int num_counters;
 
 /*
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 447e834..77cb54a 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1744,6 +1744,11 @@
 	if (target_state == PCI_POWER_ERROR)
 		return -EIO;
 
+	/* Some devices mustn't be in D3 during system sleep */
+	if (target_state == PCI_D3hot &&
+			(dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP))
+		return 0;
+
 	pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
 
 	error = pci_set_power_state(dev, target_state);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 2a75216..194b243a 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2929,6 +2929,32 @@
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
 
+/*
+ * The Intel 6 Series/C200 Series chipset's EHCI controllers on many
+ * ASUS motherboards will cause memory corruption or a system crash
+ * if they are in D3 while the system is put into S3 sleep.
+ */
+static void __devinit asus_ehci_no_d3(struct pci_dev *dev)
+{
+	const char *sys_info;
+	static const char good_Asus_board[] = "P8Z68-V";
+
+	if (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP)
+		return;
+	if (dev->subsystem_vendor != PCI_VENDOR_ID_ASUSTEK)
+		return;
+	sys_info = dmi_get_system_info(DMI_BOARD_NAME);
+	if (sys_info && memcmp(sys_info, good_Asus_board,
+			sizeof(good_Asus_board) - 1) == 0)
+		return;
+
+	dev_info(&dev->dev, "broken D3 during system sleep on ASUS\n");
+	dev->dev_flags |= PCI_DEV_FLAGS_NO_D3_DURING_SLEEP;
+	device_set_wakeup_capable(&dev->dev, false);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c26, asus_ehci_no_d3);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c2d, asus_ehci_no_d3);
+
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
 			  struct pci_fixup *end)
 {
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index c3b331b..0cc053a 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -61,7 +61,7 @@
 	list_for_each_entry(_maps_node_, &pinctrl_maps, node) \
 		for (_i_ = 0, _map_ = &_maps_node_->maps[_i_]; \
 			_i_ < _maps_node_->num_maps; \
-			i++, _map_ = &_maps_node_->maps[_i_])
+			_i_++, _map_ = &_maps_node_->maps[_i_])
 
 /**
  * pinctrl_provide_dummies() - indicate if pinctrl provides dummy state support
diff --git a/drivers/pinctrl/pinctrl-imx.c b/drivers/pinctrl/pinctrl-imx.c
index f6e7c67..dd6d93a 100644
--- a/drivers/pinctrl/pinctrl-imx.c
+++ b/drivers/pinctrl/pinctrl-imx.c
@@ -27,16 +27,16 @@
 #include "core.h"
 #include "pinctrl-imx.h"
 
-#define IMX_PMX_DUMP(info, p, m, c, n)		\
-{						\
-	int i, j;				\
-	printk("Format: Pin Mux Config\n");	\
-	for (i = 0; i < n; i++) {		\
-		j = p[i];			\
-		printk("%s %d 0x%lx\n",		\
-			info->pins[j].name,	\
-			m[i], c[i]);		\
-	}					\
+#define IMX_PMX_DUMP(info, p, m, c, n)			\
+{							\
+	int i, j;					\
+	printk(KERN_DEBUG "Format: Pin Mux Config\n");	\
+	for (i = 0; i < n; i++) {			\
+		j = p[i];				\
+		printk(KERN_DEBUG "%s %d 0x%lx\n",	\
+			info->pins[j].name,		\
+			m[i], c[i]);			\
+	}						\
 }
 
 /* The bits in CONFIG cell defined in binding doc*/
@@ -173,8 +173,10 @@
 
 	/* create mux map */
 	parent = of_get_parent(np);
-	if (!parent)
+	if (!parent) {
+		kfree(new_map);
 		return -EINVAL;
+	}
 	new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
 	new_map[0].data.mux.function = parent->name;
 	new_map[0].data.mux.group = np->name;
@@ -193,7 +195,7 @@
 	}
 
 	dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n",
-		new_map->data.mux.function, new_map->data.mux.group, map_num);
+		(*map)->data.mux.function, (*map)->data.mux.group, map_num);
 
 	return 0;
 }
@@ -201,10 +203,7 @@
 static void imx_dt_free_map(struct pinctrl_dev *pctldev,
 				struct pinctrl_map *map, unsigned num_maps)
 {
-	int i;
-
-	for (i = 0; i < num_maps; i++)
-		kfree(map);
+	kfree(map);
 }
 
 static struct pinctrl_ops imx_pctrl_ops = {
@@ -475,9 +474,8 @@
 		grp->configs[j] = config & ~IMX_PAD_SION;
 	}
 
-#ifdef DEBUG
 	IMX_PMX_DUMP(info, grp->pins, grp->mux_mode, grp->configs, grp->npins);
-#endif
+
 	return 0;
 }
 
diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c
index 556e45a..4ba4636 100644
--- a/drivers/pinctrl/pinctrl-mxs.c
+++ b/drivers/pinctrl/pinctrl-mxs.c
@@ -107,8 +107,10 @@
 
 		/* Compose group name */
 		group = kzalloc(length, GFP_KERNEL);
-		if (!group)
-			return -ENOMEM;
+		if (!group) {
+			ret = -ENOMEM;
+			goto free;
+		}
 		snprintf(group, length, "%s.%d", np->name, reg);
 		new_map[i].data.mux.group = group;
 		i++;
@@ -118,7 +120,7 @@
 		pconfig = kmemdup(&config, sizeof(config), GFP_KERNEL);
 		if (!pconfig) {
 			ret = -ENOMEM;
-			goto free;
+			goto free_group;
 		}
 
 		new_map[i].type = PIN_MAP_TYPE_CONFIGS_GROUP;
@@ -133,6 +135,9 @@
 
 	return 0;
 
+free_group:
+	if (!purecfg)
+		kfree(group);
 free:
 	kfree(new_map);
 	return ret;
@@ -511,6 +516,7 @@
 	return 0;
 
 err:
+	platform_set_drvdata(pdev, NULL);
 	iounmap(d->base);
 	return ret;
 }
@@ -520,6 +526,7 @@
 {
 	struct mxs_pinctrl_data *d = platform_get_drvdata(pdev);
 
+	platform_set_drvdata(pdev, NULL);
 	pinctrl_unregister(d->pctl);
 	iounmap(d->base);
 
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index b26395d..3e7e47d 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -673,7 +673,7 @@
 	 * wakeup is anyhow controlled by the RIMSC and FIMSC registers.
 	 */
 	if (nmk_chip->sleepmode && on) {
-		__nmk_gpio_set_slpm(nmk_chip, gpio % nmk_chip->chip.base,
+		__nmk_gpio_set_slpm(nmk_chip, gpio % NMK_GPIO_PER_CHIP,
 				    NMK_GPIO_SLPM_WAKEUP_ENABLE);
 	}
 
@@ -1246,6 +1246,7 @@
 		ret = PTR_ERR(clk);
 		goto out_unmap;
 	}
+	clk_prepare(clk);
 
 	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
 	if (!nmk_chip) {
@@ -1437,7 +1438,27 @@
 
 	dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins);
 
-	/* Handle this special glitch on altfunction C */
+	/*
+	 * If we're setting altfunc C by setting both AFSLA and AFSLB to 1,
+	 * we may pass through an undesired state. In this case we take
+	 * some extra care.
+	 *
+	 * Safe sequence used to switch IOs between GPIO and Alternate-C mode:
+	 *  - Save SLPM registers (since we have a shadow register in the
+	 *    nmk_chip we're using that as backup)
+	 *  - Set SLPM=0 for the IOs you want to switch and others to 1
+	 *  - Configure the GPIO registers for the IOs that are being switched
+	 *  - Set IOFORCE=1
+	 *  - Modify the AFLSA/B registers for the IOs that are being switched
+	 *  - Set IOFORCE=0
+	 *  - Restore SLPM registers
+	 *  - Any spurious wake up event during switch sequence to be ignored
+	 *    and cleared
+	 *
+	 * We REALLY need to save ALL slpm registers, because the external
+	 * IOFORCE will switch *all* ports to their sleepmode setting to as
+	 * to avoid glitches. (Not just one port!)
+	 */
 	glitch = (g->altsetting == NMK_GPIO_ALT_C);
 
 	if (glitch) {
diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c
index ba15b1a..e9f8e7d 100644
--- a/drivers/pinctrl/pinctrl-sirf.c
+++ b/drivers/pinctrl/pinctrl-sirf.c
@@ -1184,7 +1184,7 @@
 	return ret;
 }
 
-static const struct of_device_id pinmux_ids[]  = {
+static const struct of_device_id pinmux_ids[] __devinitconst = {
 	{ .compatible = "sirf,prima2-gpio-pinmux" },
 	{}
 };
diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c
index 5ae50aa..b3f6b28 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.c
+++ b/drivers/pinctrl/spear/pinctrl-spear.c
@@ -2,7 +2,7 @@
  * Driver for the ST Microelectronics SPEAr pinmux
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * Inspired from:
  * - U300 Pinctl drivers
diff --git a/drivers/pinctrl/spear/pinctrl-spear.h b/drivers/pinctrl/spear/pinctrl-spear.h
index 9155783..d950eb7 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.h
+++ b/drivers/pinctrl/spear/pinctrl-spear.h
@@ -2,7 +2,7 @@
  * Driver header file for the ST Microelectronics SPEAr pinmux
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c
index fff168b..d6cca8c 100644
--- a/drivers/pinctrl/spear/pinctrl-spear1310.c
+++ b/drivers/pinctrl/spear/pinctrl-spear1310.c
@@ -2,7 +2,7 @@
  * Driver for the ST Microelectronics SPEAr1310 pinmux
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -2192,7 +2192,7 @@
 }
 module_exit(spear1310_pinctrl_exit);
 
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
 MODULE_DESCRIPTION("ST Microelectronics SPEAr1310 pinctrl driver");
 MODULE_LICENSE("GPL v2");
 MODULE_DEVICE_TABLE(of, spear1310_pinctrl_of_match);
diff --git a/drivers/pinctrl/spear/pinctrl-spear1340.c b/drivers/pinctrl/spear/pinctrl-spear1340.c
index a8ab2a6..a0eb057 100644
--- a/drivers/pinctrl/spear/pinctrl-spear1340.c
+++ b/drivers/pinctrl/spear/pinctrl-spear1340.c
@@ -2,7 +2,7 @@
  * Driver for the ST Microelectronics SPEAr1340 pinmux
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -1983,7 +1983,7 @@
 }
 module_exit(spear1340_pinctrl_exit);
 
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
 MODULE_DESCRIPTION("ST Microelectronics SPEAr1340 pinctrl driver");
 MODULE_LICENSE("GPL v2");
 MODULE_DEVICE_TABLE(of, spear1340_pinctrl_of_match);
diff --git a/drivers/pinctrl/spear/pinctrl-spear300.c b/drivers/pinctrl/spear/pinctrl-spear300.c
index 9c82a35..4dfc284 100644
--- a/drivers/pinctrl/spear/pinctrl-spear300.c
+++ b/drivers/pinctrl/spear/pinctrl-spear300.c
@@ -2,7 +2,7 @@
  * Driver for the ST Microelectronics SPEAr300 pinmux
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -702,7 +702,7 @@
 }
 module_exit(spear300_pinctrl_exit);
 
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
 MODULE_DESCRIPTION("ST Microelectronics SPEAr300 pinctrl driver");
 MODULE_LICENSE("GPL v2");
 MODULE_DEVICE_TABLE(of, spear300_pinctrl_of_match);
diff --git a/drivers/pinctrl/spear/pinctrl-spear310.c b/drivers/pinctrl/spear/pinctrl-spear310.c
index 1a97076..9688369 100644
--- a/drivers/pinctrl/spear/pinctrl-spear310.c
+++ b/drivers/pinctrl/spear/pinctrl-spear310.c
@@ -2,7 +2,7 @@
  * Driver for the ST Microelectronics SPEAr310 pinmux
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -425,7 +425,7 @@
 }
 module_exit(spear310_pinctrl_exit);
 
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
 MODULE_DESCRIPTION("ST Microelectronics SPEAr310 pinctrl driver");
 MODULE_LICENSE("GPL v2");
 MODULE_DEVICE_TABLE(of, SPEAr310_pinctrl_of_match);
diff --git a/drivers/pinctrl/spear/pinctrl-spear320.c b/drivers/pinctrl/spear/pinctrl-spear320.c
index de726e6..020b1e0 100644
--- a/drivers/pinctrl/spear/pinctrl-spear320.c
+++ b/drivers/pinctrl/spear/pinctrl-spear320.c
@@ -2,7 +2,7 @@
  * Driver for the ST Microelectronics SPEAr320 pinmux
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -3462,7 +3462,7 @@
 }
 module_exit(spear320_pinctrl_exit);
 
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
 MODULE_DESCRIPTION("ST Microelectronics SPEAr320 pinctrl driver");
 MODULE_LICENSE("GPL v2");
 MODULE_DEVICE_TABLE(of, spear320_pinctrl_of_match);
diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.c b/drivers/pinctrl/spear/pinctrl-spear3xx.c
index 91c883b..0242378 100644
--- a/drivers/pinctrl/spear/pinctrl-spear3xx.c
+++ b/drivers/pinctrl/spear/pinctrl-spear3xx.c
@@ -2,7 +2,7 @@
  * Driver for the ST Microelectronics SPEAr3xx pinmux
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.h b/drivers/pinctrl/spear/pinctrl-spear3xx.h
index 5d5fdd8..31f4434 100644
--- a/drivers/pinctrl/spear/pinctrl-spear3xx.h
+++ b/drivers/pinctrl/spear/pinctrl-spear3xx.h
@@ -2,7 +2,7 @@
  * Header file for the ST Microelectronics SPEAr3xx pinmux
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index e1b8c54..a739f5c 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -794,17 +794,17 @@
 }
 
 static struct of_regulator_match ab8500_regulator_matches[] = {
-	{ .name	= "LDO-AUX1",    .driver_data = (void *) AB8500_LDO_AUX1, },
-	{ .name	= "LDO-AUX2",    .driver_data = (void *) AB8500_LDO_AUX2, },
-	{ .name	= "LDO-AUX3",    .driver_data = (void *) AB8500_LDO_AUX3, },
-	{ .name	= "LDO-INTCORE", .driver_data = (void *) AB8500_LDO_INTCORE, },
-	{ .name	= "LDO-TVOUT",   .driver_data = (void *) AB8500_LDO_TVOUT, },
-	{ .name = "LDO-USB",     .driver_data = (void *) AB8500_LDO_USB, },
-	{ .name = "LDO-AUDIO",   .driver_data = (void *) AB8500_LDO_AUDIO, },
-	{ .name	= "LDO-ANAMIC1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
-	{ .name	= "LDO-ANAMIC2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
-	{ .name	= "LDO-DMIC",    .driver_data = (void *) AB8500_LDO_DMIC, },
-	{ .name	= "LDO-ANA",     .driver_data = (void *) AB8500_LDO_ANA, },
+	{ .name	= "ab8500_ldo_aux1",    .driver_data = (void *) AB8500_LDO_AUX1, },
+	{ .name	= "ab8500_ldo_aux2",    .driver_data = (void *) AB8500_LDO_AUX2, },
+	{ .name	= "ab8500_ldo_aux3",    .driver_data = (void *) AB8500_LDO_AUX3, },
+	{ .name	= "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
+	{ .name	= "ab8500_ldo_tvout",   .driver_data = (void *) AB8500_LDO_TVOUT, },
+	{ .name = "ab8500_ldo_usb",     .driver_data = (void *) AB8500_LDO_USB, },
+	{ .name = "ab8500_ldo_audio",   .driver_data = (void *) AB8500_LDO_AUDIO, },
+	{ .name	= "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
+	{ .name	= "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
+	{ .name	= "ab8500_ldo_dmic",    .driver_data = (void *) AB8500_LDO_DMIC, },
+	{ .name	= "ab8500_ldo_ana",     .driver_data = (void *) AB8500_LDO_ANA, },
 };
 
 static __devinit int
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 3660bac..e82e7ea 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -224,7 +224,7 @@
 		.of_match_table = of_anatop_regulator_match_tbl,
 	},
 	.probe	= anatop_regulator_probe,
-	.remove	= anatop_regulator_remove,
+	.remove	= __devexit_p(anatop_regulator_remove),
 };
 
 static int __init anatop_regulator_init(void)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 7584a74..09a737c 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2050,6 +2050,9 @@
 		return -EINVAL;
 	}
 
+	if (min_uV < rdev->desc->min_uV)
+		min_uV = rdev->desc->min_uV;
+
 	ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c
index 968f97f..9dbb491 100644
--- a/drivers/regulator/db8500-prcmu.c
+++ b/drivers/regulator/db8500-prcmu.c
@@ -452,26 +452,26 @@
 }
 
 static struct of_regulator_match db8500_regulator_matches[] = {
-	{ .name	= "db8500-vape",          .driver_data = (void *) DB8500_REGULATOR_VAPE, },
-	{ .name	= "db8500-varm",          .driver_data = (void *) DB8500_REGULATOR_VARM, },
-	{ .name	= "db8500-vmodem",        .driver_data = (void *) DB8500_REGULATOR_VMODEM, },
-	{ .name	= "db8500-vpll",          .driver_data = (void *) DB8500_REGULATOR_VPLL, },
-	{ .name	= "db8500-vsmps1",        .driver_data = (void *) DB8500_REGULATOR_VSMPS1, },
-	{ .name	= "db8500-vsmps2",        .driver_data = (void *) DB8500_REGULATOR_VSMPS2, },
-	{ .name	= "db8500-vsmps3",        .driver_data = (void *) DB8500_REGULATOR_VSMPS3, },
-	{ .name	= "db8500-vrf1",          .driver_data = (void *) DB8500_REGULATOR_VRF1, },
-	{ .name	= "db8500-sva-mmdsp",     .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, },
-	{ .name	= "db8500-sva-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, },
-	{ .name	= "db8500-sva-pipe",      .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, },
-	{ .name	= "db8500-sia-mmdsp",     .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, },
-	{ .name	= "db8500-sia-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, },
-	{ .name	= "db8500-sia-pipe",      .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, },
-	{ .name	= "db8500-sga",           .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, },
-	{ .name	= "db8500-b2r2-mcde",     .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, },
-	{ .name	= "db8500-esram12",       .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, },
-	{ .name	= "db8500-esram12-ret",   .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, },
-	{ .name	= "db8500-esram34",       .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, },
-	{ .name	= "db8500-esram34-ret",   .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, },
+	{ .name	= "db8500_vape",          .driver_data = (void *) DB8500_REGULATOR_VAPE, },
+	{ .name	= "db8500_varm",          .driver_data = (void *) DB8500_REGULATOR_VARM, },
+	{ .name	= "db8500_vmodem",        .driver_data = (void *) DB8500_REGULATOR_VMODEM, },
+	{ .name	= "db8500_vpll",          .driver_data = (void *) DB8500_REGULATOR_VPLL, },
+	{ .name	= "db8500_vsmps1",        .driver_data = (void *) DB8500_REGULATOR_VSMPS1, },
+	{ .name	= "db8500_vsmps2",        .driver_data = (void *) DB8500_REGULATOR_VSMPS2, },
+	{ .name	= "db8500_vsmps3",        .driver_data = (void *) DB8500_REGULATOR_VSMPS3, },
+	{ .name	= "db8500_vrf1",          .driver_data = (void *) DB8500_REGULATOR_VRF1, },
+	{ .name	= "db8500_sva_mmdsp",     .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, },
+	{ .name	= "db8500_sva_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, },
+	{ .name	= "db8500_sva_pipe",      .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, },
+	{ .name	= "db8500_sia_mmdsp",     .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, },
+	{ .name	= "db8500_sia_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, },
+	{ .name	= "db8500_sia_pipe",      .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, },
+	{ .name	= "db8500_sga",           .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, },
+	{ .name	= "db8500_b2r2_mcde",     .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, },
+	{ .name	= "db8500_esram12",       .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, },
+	{ .name	= "db8500_esram12_ret",   .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, },
+	{ .name	= "db8500_esram34",       .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, },
+	{ .name	= "db8500_esram34_ret",   .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, },
 };
 
 static __devinit int
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index 9997d7a..242851a 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -101,16 +101,20 @@
 }
 
 static int gpio_regulator_set_value(struct regulator_dev *dev,
-					int min, int max)
+					int min, int max, unsigned *selector)
 {
 	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
-	int ptr, target, state, best_val = INT_MAX;
+	int ptr, target = 0, state, best_val = INT_MAX;
 
 	for (ptr = 0; ptr < data->nr_states; ptr++)
 		if (data->states[ptr].value < best_val &&
 		    data->states[ptr].value >= min &&
-		    data->states[ptr].value <= max)
+		    data->states[ptr].value <= max) {
 			target = data->states[ptr].gpios;
+			best_val = data->states[ptr].value;
+			if (selector)
+				*selector = ptr;
+		}
 
 	if (best_val == INT_MAX)
 		return -EINVAL;
@@ -128,7 +132,7 @@
 					int min_uV, int max_uV,
 					unsigned *selector)
 {
-	return gpio_regulator_set_value(dev, min_uV, max_uV);
+	return gpio_regulator_set_value(dev, min_uV, max_uV, selector);
 }
 
 static int gpio_regulator_list_voltage(struct regulator_dev *dev,
@@ -145,7 +149,7 @@
 static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
 					int min_uA, int max_uA)
 {
-	return gpio_regulator_set_value(dev, min_uA, max_uA);
+	return gpio_regulator_set_value(dev, min_uA, max_uA, NULL);
 }
 
 static struct regulator_ops gpio_regulator_voltage_ops = {
@@ -286,7 +290,7 @@
 
 	cfg.dev = &pdev->dev;
 	cfg.init_data = config->init_data;
-	cfg.driver_data = &drvdata;
+	cfg.driver_data = drvdata;
 
 	drvdata->dev = regulator_register(&drvdata->desc, &cfg);
 	if (IS_ERR(drvdata->dev)) {
diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c
index 1f4bb80..9d540cd 100644
--- a/drivers/regulator/max8649.c
+++ b/drivers/regulator/max8649.c
@@ -259,6 +259,7 @@
 	config.dev = &client->dev;
 	config.init_data = pdata->regulator;
 	config.driver_data = info;
+	config.regmap = info->regmap;
 
 	info->regulator = regulator_register(&dcdc_desc, &config);
 	if (IS_ERR(info->regulator)) {
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index c4435f6..795f75a 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -673,7 +673,9 @@
 			pmic->desc[id].ops = &palmas_ops_smps10;
 			pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL;
 			pmic->desc[id].vsel_mask = SMPS10_VSEL;
-			pmic->desc[id].enable_reg = PALMAS_SMPS10_STATUS;
+			pmic->desc[id].enable_reg =
+					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+							PALMAS_SMPS10_STATUS);
 			pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
 		}
 
@@ -739,7 +741,8 @@
 
 		pmic->desc[id].type = REGULATOR_VOLTAGE;
 		pmic->desc[id].owner = THIS_MODULE;
-		pmic->desc[id].enable_reg = palmas_regs_info[id].ctrl_addr;
+		pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
+						palmas_regs_info[id].ctrl_addr);
 		pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
 
 		if (pdata && pdata->reg_data)
@@ -775,9 +778,6 @@
 err_unregister_regulator:
 	while (--id >= 0)
 		regulator_unregister(pmic->rdev[id]);
-	kfree(pmic->rdev);
-	kfree(pmic->desc);
-	kfree(pmic);
 	return ret;
 }
 
@@ -788,10 +788,6 @@
 
 	for (id = 0; id < PALMAS_NUM_REGS; id++)
 		regulator_unregister(pmic->rdev[id]);
-
-	kfree(pmic->rdev);
-	kfree(pmic->desc);
-	kfree(pmic);
 	return 0;
 }
 
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 290d6fc..9caadb4 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -451,7 +451,7 @@
 
 	desc = reg_voltage_map[reg_id];
 
-	if (old_sel < new_sel)
+	if ((old_sel < new_sel) && s5m8767->ramp_delay)
 		return DIV_ROUND_UP(desc->step * (new_sel - old_sel),
 					s5m8767->ramp_delay * 1000);
 	return 0;
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index f841bd0..8f1be85 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -71,7 +71,7 @@
 
 /* LDO_CTRL bitfields */
 #define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id)	((ldo_id)*4)
-#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id)	(0x0F << ((ldo_id)*4))
+#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id)	(0x07 << ((ldo_id)*4))
 
 /* Number of step-down converters available */
 #define TPS65023_NUM_DCDC		3
diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c
index b88b3df..1b299aa 100644
--- a/drivers/regulator/tps6524x-regulator.c
+++ b/drivers/regulator/tps6524x-regulator.c
@@ -482,7 +482,7 @@
 	info	= &supply_info[rdev_get_id(rdev)];
 
 	if (info->flags & FIXED_VOLTAGE)
-		return info->fixed_voltage;
+		return 0;
 
 	ret = read_field(hw, &info->voltage);
 	if (ret < 0)
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index 69425c4..de138e3 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -182,7 +182,7 @@
 
 	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (ret) {
-		dev_err(pdev->dev.parent, "dma_set_coherent_mask: %d\n", ret);
+		dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret);
 		return ret;
 	}
 
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 8ea7bcc..66324ee 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -247,7 +247,7 @@
 		}
 
 		if (offset + filesz > len) {
-			dev_err(dev, "truncated fw: need 0x%x avail 0x%x\n",
+			dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n",
 					offset + filesz, len);
 			ret = -EINVAL;
 			break;
@@ -934,7 +934,7 @@
 		unmapped = iommu_unmap(rproc->domain, entry->da, entry->len);
 		if (unmapped != entry->len) {
 			/* nothing much to do besides complaining */
-			dev_err(dev, "failed to unmap %u/%u\n", entry->len,
+			dev_err(dev, "failed to unmap %u/%zu\n", entry->len,
 								unmapped);
 		}
 
@@ -1020,7 +1020,7 @@
 
 	ehdr = (struct elf32_hdr *)fw->data;
 
-	dev_info(dev, "Booting fw image %s, size %d\n", name, fw->size);
+	dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size);
 
 	/*
 	 * if enabling an IOMMU isn't relevant for this rproc, this is
@@ -1041,8 +1041,10 @@
 
 	/* look for the resource table */
 	table = rproc_find_rsc_table(rproc, fw->data, fw->size, &tablesz);
-	if (!table)
+	if (!table) {
+		ret = -EINVAL;
 		goto clean_up;
+	}
 
 	/* handle fw resources which are required to boot rproc */
 	ret = rproc_handle_boot_rsc(rproc, table, tablesz);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 6102ef2..9d46fcb 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -1792,7 +1792,7 @@
 static inline u8
 _base_get_msix_index(struct MPT2SAS_ADAPTER *ioc)
 {
-	return ioc->cpu_msix_table[smp_processor_id()];
+	return ioc->cpu_msix_table[raw_smp_processor_id()];
 }
 
 /**
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 04f80eb..77759c7 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -26,7 +26,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/types.h>
-#include <linux/version.h>
 #include <linux/blkdev.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
@@ -2477,11 +2476,9 @@
 	}
 
 	cmd = qlt_ctio_to_cmd(vha, handle, ctio);
-	if (cmd == NULL) {
-		if (status != CTIO_SUCCESS)
-			qlt_term_ctio_exchange(vha, ctio, NULL, status);
+	if (cmd == NULL)
 		return;
-	}
+
 	se_cmd = &cmd->se_cmd;
 	tfo = se_cmd->se_tfo;
 
@@ -2727,10 +2724,12 @@
 out_term:
 	ql_dbg(ql_dbg_tgt_mgt, vha, 0xf020, "Terminating work cmd %p", cmd);
 	/*
-	 * cmd has not sent to target yet, so pass NULL as the second argument
+	 * cmd has not sent to target yet, so pass NULL as the second
+	 * argument to qlt_send_term_exchange() and free the memory here.
 	 */
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	qlt_send_term_exchange(vha, NULL, &cmd->atio, 1);
+	kmem_cache_free(qla_tgt_cmd_cachep, cmd);
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	if (sess)
 		ha->tgt.tgt_ops->put_sess(sess);
@@ -3961,7 +3960,7 @@
 {
 	struct qla_hw_data *ha = vha->hw;
 	struct qla_tgt *tgt = ha->tgt.qla_tgt;
-	int reason_code;
+	int login_code;
 
 	ql_dbg(ql_dbg_tgt, vha, 0xe039,
 	    "scsi(%ld): ha state %d init_done %d oper_mode %d topo %d\n",
@@ -4004,9 +4003,9 @@
 	{
 		ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03b,
 		    "qla_target(%d): Async LOOP_UP occured "
-		    "(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
-		    le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
-		    le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+		    "(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx,
+		    le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+		    le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
 		if (tgt->link_reinit_iocb_pending) {
 			qlt_send_notify_ack(vha, (void *)&tgt->link_reinit_iocb,
 			    0, 0, 0, 0, 0, 0);
@@ -4021,23 +4020,24 @@
 	case MBA_RSCN_UPDATE:
 		ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03c,
 		    "qla_target(%d): Async event %#x occured "
-		    "(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx, code,
-		    le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
-		    le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+		    "(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx, code,
+		    le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+		    le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
 		break;
 
 	case MBA_PORT_UPDATE:
 		ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03d,
 		    "qla_target(%d): Port update async event %#x "
-		    "occured: updating the ports database (m[1]=%x, m[2]=%x, "
-		    "m[3]=%x, m[4]=%x)", vha->vp_idx, code,
-		    le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
-		    le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
-		reason_code = le16_to_cpu(mailbox[2]);
-		if (reason_code == 0x4)
+		    "occured: updating the ports database (m[0]=%x, m[1]=%x, "
+		    "m[2]=%x, m[3]=%x)", vha->vp_idx, code,
+		    le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+		    le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
+
+		login_code = le16_to_cpu(mailbox[2]);
+		if (login_code == 0x4)
 			ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03e,
 			    "Async MB 2: Got PLOGI Complete\n");
-		else if (reason_code == 0x7)
+		else if (login_code == 0x7)
 			ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03f,
 			    "Async MB 2: Port Logged Out\n");
 		break;
@@ -4045,9 +4045,9 @@
 	default:
 		ql_dbg(ql_dbg_tgt_mgt, vha, 0xf040,
 		    "qla_target(%d): Async event %#x occured: "
-		    "ignore (m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
-		    code, le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
-		    le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+		    "ignore (m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx,
+		    code, le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+		    le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
 		break;
 	}
 
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index 9ec19bc..9f9ef16 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -919,7 +919,6 @@
 #define QLA_TGT_XMIT_STATUS		2
 #define QLA_TGT_XMIT_ALL		(QLA_TGT_XMIT_STATUS|QLA_TGT_XMIT_DATA)
 
-#include <linux/version.h>
 
 extern struct qla_tgt_data qla_target;
 /*
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 436598f5..6e64314 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -137,13 +137,15 @@
  */
 static int tcm_qla2xxx_npiv_extract_wwn(const char *ns, u64 *nm)
 {
-	unsigned int i, j, value;
+	unsigned int i, j;
 	u8 wwn[8];
 
 	memset(wwn, 0, sizeof(wwn));
 
 	/* Validate and store the new name */
 	for (i = 0, j = 0; i < 16; i++) {
+		int value;
+
 		value = hex_to_bin(*ns++);
 		if (value >= 0)
 			j = (j << 4) | value;
@@ -652,8 +654,8 @@
 /*
  * Called from qla_target.c:qlt_issue_task_mgmt()
  */
-int tcm_qla2xxx_handle_tmr(struct qla_tgt_mgmt_cmd *mcmd, uint32_t lun,
-			uint8_t tmr_func, uint32_t tag)
+static int tcm_qla2xxx_handle_tmr(struct qla_tgt_mgmt_cmd *mcmd, uint32_t lun,
+	uint8_t tmr_func, uint32_t tag)
 {
 	struct qla_tgt_sess *sess = mcmd->sess;
 	struct se_cmd *se_cmd = &mcmd->se_cmd;
@@ -762,65 +764,8 @@
 struct target_fabric_configfs *tcm_qla2xxx_fabric_configfs;
 struct target_fabric_configfs *tcm_qla2xxx_npiv_fabric_configfs;
 
-static int tcm_qla2xxx_setup_nacl_from_rport(
-	struct se_portal_group *se_tpg,
-	struct se_node_acl *se_nacl,
-	struct tcm_qla2xxx_lport *lport,
-	struct tcm_qla2xxx_nacl *nacl,
-	u64 rport_wwnn)
-{
-	struct scsi_qla_host *vha = lport->qla_vha;
-	struct Scsi_Host *sh = vha->host;
-	struct fc_host_attrs *fc_host = shost_to_fc_host(sh);
-	struct fc_rport *rport;
-	unsigned long flags;
-	void *node;
-	int rc;
-
-	/*
-	 * Scan the existing rports, and create a session for the
-	 * explict NodeACL is an matching rport->node_name already
-	 * exists.
-	 */
-	spin_lock_irqsave(sh->host_lock, flags);
-	list_for_each_entry(rport, &fc_host->rports, peers) {
-		if (rport_wwnn != rport->node_name)
-			continue;
-
-		pr_debug("Located existing rport_wwpn and rport->node_name: 0x%016LX, port_id: 0x%04x\n",
-		    rport->node_name, rport->port_id);
-		nacl->nport_id = rport->port_id;
-
-		spin_unlock_irqrestore(sh->host_lock, flags);
-
-		spin_lock_irqsave(&vha->hw->hardware_lock, flags);
-		node = btree_lookup32(&lport->lport_fcport_map, rport->port_id);
-		if (node) {
-			rc = btree_update32(&lport->lport_fcport_map,
-					    rport->port_id, se_nacl);
-		} else {
-			rc = btree_insert32(&lport->lport_fcport_map,
-					    rport->port_id, se_nacl,
-					    GFP_ATOMIC);
-		}
-		spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
-
-		if (rc) {
-			pr_err("Unable to insert se_nacl into fcport_map");
-			WARN_ON(rc > 0);
-			return rc;
-		}
-
-		pr_debug("Inserted into fcport_map: %p for WWNN: 0x%016LX, port_id: 0x%08x\n",
-		    se_nacl, rport_wwnn, nacl->nport_id);
-
-		return 1;
-	}
-	spin_unlock_irqrestore(sh->host_lock, flags);
-
-	return 0;
-}
-
+static void tcm_qla2xxx_clear_sess_lookup(struct tcm_qla2xxx_lport *,
+			struct tcm_qla2xxx_nacl *, struct qla_tgt_sess *);
 /*
  * Expected to be called with struct qla_hw_data->hardware_lock held
  */
@@ -842,11 +787,40 @@
 
 	pr_debug("Removed from fcport_map: %p for WWNN: 0x%016LX, port_id: 0x%06x\n",
 	    se_nacl, nacl->nport_wwnn, nacl->nport_id);
+	/*
+	 * Now clear the se_nacl and session pointers from our HW lport lookup
+	 * table mapping for this initiator's fabric S_ID and LOOP_ID entries.
+	 *
+	 * This is done ahead of callbacks into tcm_qla2xxx_free_session() ->
+	 * target_wait_for_sess_cmds() before the session waits for outstanding
+	 * I/O to complete, to avoid a race between session shutdown execution
+	 * and incoming ATIOs or TMRs picking up a stale se_node_act reference.
+	 */
+	tcm_qla2xxx_clear_sess_lookup(lport, nacl, sess);
+}
+
+static void tcm_qla2xxx_release_session(struct kref *kref)
+{
+	struct se_session *se_sess = container_of(kref,
+			struct se_session, sess_kref);
+
+	qlt_unreg_sess(se_sess->fabric_sess_ptr);
+}
+
+static void tcm_qla2xxx_put_session(struct se_session *se_sess)
+{
+	struct qla_tgt_sess *sess = se_sess->fabric_sess_ptr;
+	struct qla_hw_data *ha = sess->vha->hw;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+	kref_put(&se_sess->sess_kref, tcm_qla2xxx_release_session);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 }
 
 static void tcm_qla2xxx_put_sess(struct qla_tgt_sess *sess)
 {
-	target_put_session(sess->se_sess);
+	tcm_qla2xxx_put_session(sess->se_sess);
 }
 
 static void tcm_qla2xxx_shutdown_sess(struct qla_tgt_sess *sess)
@@ -859,14 +833,10 @@
 	struct config_group *group,
 	const char *name)
 {
-	struct se_wwn *se_wwn = se_tpg->se_tpg_wwn;
-	struct tcm_qla2xxx_lport *lport = container_of(se_wwn,
-				struct tcm_qla2xxx_lport, lport_wwn);
 	struct se_node_acl *se_nacl, *se_nacl_new;
 	struct tcm_qla2xxx_nacl *nacl;
 	u64 wwnn;
 	u32 qla2xxx_nexus_depth;
-	int rc;
 
 	if (tcm_qla2xxx_parse_wwn(name, &wwnn, 1) < 0)
 		return ERR_PTR(-EINVAL);
@@ -893,16 +863,6 @@
 	nacl = container_of(se_nacl, struct tcm_qla2xxx_nacl, se_node_acl);
 	nacl->nport_wwnn = wwnn;
 	tcm_qla2xxx_format_wwn(&nacl->nport_name[0], TCM_QLA2XXX_NAMELEN, wwnn);
-	/*
-	 * Setup a se_nacl handle based on an a matching struct fc_rport setup
-	 * via drivers/scsi/qla2xxx/qla_init.c:qla2x00_reg_remote_port()
-	 */
-	rc = tcm_qla2xxx_setup_nacl_from_rport(se_tpg, se_nacl, lport,
-					nacl, wwnn);
-	if (rc < 0) {
-		tcm_qla2xxx_release_fabric_acl(se_tpg, se_nacl_new);
-		return ERR_PTR(rc);
-	}
 
 	return se_nacl;
 }
@@ -1390,6 +1350,25 @@
 	    nacl->qla_tgt_sess, new_se_nacl, new_se_nacl->initiatorname);
 }
 
+/*
+ * Should always be called with qla_hw_data->hardware_lock held.
+ */
+static void tcm_qla2xxx_clear_sess_lookup(struct tcm_qla2xxx_lport *lport,
+		struct tcm_qla2xxx_nacl *nacl, struct qla_tgt_sess *sess)
+{
+	struct se_session *se_sess = sess->se_sess;
+	unsigned char be_sid[3];
+
+	be_sid[0] = sess->s_id.b.domain;
+	be_sid[1] = sess->s_id.b.area;
+	be_sid[2] = sess->s_id.b.al_pa;
+
+	tcm_qla2xxx_set_sess_by_s_id(lport, NULL, nacl, se_sess,
+				sess, be_sid);
+	tcm_qla2xxx_set_sess_by_loop_id(lport, NULL, nacl, se_sess,
+				sess, sess->loop_id);
+}
+
 static void tcm_qla2xxx_free_session(struct qla_tgt_sess *sess)
 {
 	struct qla_tgt *tgt = sess->tgt;
@@ -1398,8 +1377,6 @@
 	struct se_node_acl *se_nacl;
 	struct tcm_qla2xxx_lport *lport;
 	struct tcm_qla2xxx_nacl *nacl;
-	unsigned char be_sid[3];
-	unsigned long flags;
 
 	BUG_ON(in_interrupt());
 
@@ -1419,21 +1396,6 @@
 		return;
 	}
 	target_wait_for_sess_cmds(se_sess, 0);
-	/*
-	 * And now clear the se_nacl and session pointers from our HW lport
-	 * mappings for fabric S_ID and LOOP_ID.
-	 */
-	memset(&be_sid, 0, 3);
-	be_sid[0] = sess->s_id.b.domain;
-	be_sid[1] = sess->s_id.b.area;
-	be_sid[2] = sess->s_id.b.al_pa;
-
-	spin_lock_irqsave(&ha->hardware_lock, flags);
-	tcm_qla2xxx_set_sess_by_s_id(lport, NULL, nacl, se_sess,
-			sess, be_sid);
-	tcm_qla2xxx_set_sess_by_loop_id(lport, NULL, nacl, se_sess,
-			sess, sess->loop_id);
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	transport_deregister_session_configfs(sess->se_sess);
 	transport_deregister_session(sess->se_sess);
@@ -1731,6 +1693,7 @@
 	.new_cmd_map			= NULL,
 	.check_stop_free		= tcm_qla2xxx_check_stop_free,
 	.release_cmd			= tcm_qla2xxx_release_cmd,
+	.put_session			= tcm_qla2xxx_put_session,
 	.shutdown_session		= tcm_qla2xxx_shutdown_session,
 	.close_session			= tcm_qla2xxx_close_session,
 	.sess_get_index			= tcm_qla2xxx_sess_get_index,
@@ -1779,6 +1742,7 @@
 	.tpg_release_fabric_acl		= tcm_qla2xxx_release_fabric_acl,
 	.tpg_get_inst_index		= tcm_qla2xxx_tpg_get_inst_index,
 	.release_cmd			= tcm_qla2xxx_release_cmd,
+	.put_session			= tcm_qla2xxx_put_session,
 	.shutdown_session		= tcm_qla2xxx_shutdown_session,
 	.close_session			= tcm_qla2xxx_close_session,
 	.sess_get_index			= tcm_qla2xxx_sess_get_index,
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 61c82a3..bbbc9c91 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -90,11 +90,9 @@
 EXPORT_SYMBOL(scsi_logging_level);
 #endif
 
-#if IS_ENABLED(CONFIG_PM) || IS_ENABLED(CONFIG_BLK_DEV_SD)
-/* sd and scsi_pm need to coordinate flushing async actions */
+/* sd, scsi core and power management need to coordinate flushing async actions */
 LIST_HEAD(scsi_sd_probe_domain);
 EXPORT_SYMBOL(scsi_sd_probe_domain);
-#endif
 
 /* NB: These are exposed through /proc/scsi/scsi and form part of the ABI.
  * You may not alter any existing entry (although adding new ones is
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 6f0a4c6..6f72b80 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1899,6 +1899,8 @@
 {
 	if (sdp->host->max_cmd_len < 16)
 		return 0;
+	if (sdp->try_rc_10_first)
+		return 0;
 	if (sdp->scsi_level > SCSI_SPC_2)
 		return 1;
 	if (scsi_device_protection(sdp))
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 46ef5fe..0c73dd4 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -801,7 +801,7 @@
 	mcspi_dma = &mcspi->dma_channels[spi->chip_select];
 
 	if (!cs) {
-		cs = devm_kzalloc(&spi->dev , sizeof *cs, GFP_KERNEL);
+		cs = kzalloc(sizeof *cs, GFP_KERNEL);
 		if (!cs)
 			return -ENOMEM;
 		cs->base = mcspi->base + spi->chip_select * 0x14;
@@ -842,6 +842,7 @@
 		cs = spi->controller_state;
 		list_del(&cs->node);
 
+		kfree(cs);
 	}
 
 	if (spi->chip_select < spi->master->num_chipselect) {
diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c
index 1c3d638..aeac1ca 100644
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@@ -30,6 +30,7 @@
 #include <linux/pci.h>
 #include <linux/usb.h>
 #include <linux/errno.h>
+#include <linux/kconfig.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/fcntl.h>
@@ -981,6 +982,8 @@
 }
 EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
 
+#if IS_ENABLED(CONFIG_USB)
+
 static int comedi_old_usb_auto_config(struct usb_interface *intf,
 				      struct comedi_driver *driver)
 {
@@ -1043,3 +1046,5 @@
 	comedi_driver_unregister(comedi_driver);
 }
 EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister);
+
+#endif
diff --git a/drivers/staging/gdm72xx/netlink_k.c b/drivers/staging/gdm72xx/netlink_k.c
index 292af0f..5166513 100644
--- a/drivers/staging/gdm72xx/netlink_k.c
+++ b/drivers/staging/gdm72xx/netlink_k.c
@@ -104,7 +104,7 @@
 
 void netlink_exit(struct sock *sock)
 {
-	sock_release(sock->sk_socket);
+	netlink_kernel_release(sock);
 }
 
 int netlink_send(struct sock *sock, int group, u16 type, void *msg, int len)
diff --git a/drivers/staging/iio/Documentation/device.txt b/drivers/staging/iio/Documentation/device.txt
index 0338c7c..f03fbd3 100644
--- a/drivers/staging/iio/Documentation/device.txt
+++ b/drivers/staging/iio/Documentation/device.txt
@@ -29,8 +29,6 @@
 	* info->driver_module:
 		Set to THIS_MODULE. Used to ensure correct ownership
 		of various resources allocate by the core.
-	* info->num_interrupt_lines:
-		Number of event triggering hardware lines the device has.
 	* info->event_attrs:
 		Attributes used to enable / disable hardware events.
 	* info->attrs:
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index 2490dd2..8f1b3af 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -13,6 +13,7 @@
 config AD7298
 	tristate "Analog Devices AD7298 ADC driver"
 	depends on SPI
+	select IIO_KFIFO_BUF if IIO_BUFFER
 	help
 	  Say yes here to build support for Analog Devices AD7298
 	  8 Channel ADC with temperature sensor.
diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c
index 10ab6dc..a13afff 100644
--- a/drivers/staging/iio/adc/ad7606_core.c
+++ b/drivers/staging/iio/adc/ad7606_core.c
@@ -235,7 +235,8 @@
 		.indexed = 1,					\
 		.channel = num,					\
 		.address = num,					\
-		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,	\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+				IIO_CHAN_INFO_SCALE_SHARED_BIT, \
 		.scan_index = num,				\
 		.scan_type = IIO_ST('s', 16, 16, 0),		\
 	}
diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c
index 3295ea6..97ef670 100644
--- a/drivers/staging/media/lirc/lirc_serial.c
+++ b/drivers/staging/media/lirc/lirc_serial.c
@@ -129,6 +129,7 @@
 
 static struct lirc_serial hardware[] = {
 	[LIRC_HOMEBREW] = {
+		.lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_HOMEBREW].lock),
 		.signal_pin        = UART_MSR_DCD,
 		.signal_pin_change = UART_MSR_DDCD,
 		.on  = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
@@ -145,6 +146,7 @@
 	},
 
 	[LIRC_IRDEO] = {
+		.lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO].lock),
 		.signal_pin        = UART_MSR_DSR,
 		.signal_pin_change = UART_MSR_DDSR,
 		.on  = UART_MCR_OUT2,
@@ -156,6 +158,7 @@
 	},
 
 	[LIRC_IRDEO_REMOTE] = {
+		.lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO_REMOTE].lock),
 		.signal_pin        = UART_MSR_DSR,
 		.signal_pin_change = UART_MSR_DDSR,
 		.on  = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
@@ -167,6 +170,7 @@
 	},
 
 	[LIRC_ANIMAX] = {
+		.lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_ANIMAX].lock),
 		.signal_pin        = UART_MSR_DCD,
 		.signal_pin_change = UART_MSR_DDCD,
 		.on  = 0,
@@ -177,6 +181,7 @@
 	},
 
 	[LIRC_IGOR] = {
+		.lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IGOR].lock),
 		.signal_pin        = UART_MSR_DSR,
 		.signal_pin_change = UART_MSR_DDSR,
 		.on  = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
@@ -201,6 +206,7 @@
 	 * See also http://www.nslu2-linux.org for this device
 	 */
 	[LIRC_NSLU2] = {
+		.lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_NSLU2].lock),
 		.signal_pin        = UART_MSR_CTS,
 		.signal_pin_change = UART_MSR_DCTS,
 		.on  = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
diff --git a/drivers/staging/omapdrm/omap_fbdev.c b/drivers/staging/omapdrm/omap_fbdev.c
index 11acd4c..8c6ed3b 100644
--- a/drivers/staging/omapdrm/omap_fbdev.c
+++ b/drivers/staging/omapdrm/omap_fbdev.c
@@ -208,7 +208,8 @@
 	 */
 	ret = omap_gem_get_paddr(fbdev->bo, &paddr, true);
 	if (ret) {
-		dev_err(dev->dev, "could not map (paddr)!\n");
+		dev_err(dev->dev,
+			"could not map (paddr)!  Skipping framebuffer alloc\n");
 		ret = -ENOMEM;
 		goto fail;
 	}
@@ -388,8 +389,11 @@
 
 	fbi = helper->fbdev;
 
-	unregister_framebuffer(fbi);
-	framebuffer_release(fbi);
+	/* only cleanup framebuffer if it is present */
+	if (fbi) {
+		unregister_framebuffer(fbi);
+		framebuffer_release(fbi);
+	}
 
 	drm_fb_helper_fini(helper);
 
diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index 9bd18e2..69f616c 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -102,6 +102,8 @@
 	/* - */
 	{USB_DEVICE(0x20F4, 0x646B)},
 	{USB_DEVICE(0x083A, 0xC512)},
+	{USB_DEVICE(0x25D4, 0x4CA1)},
+	{USB_DEVICE(0x25D4, 0x4CAB)},
 
 /* RTL8191SU */
 	/* Realtek */
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index e624b83..9179997 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -374,8 +374,9 @@
 
 out:
 	transport_kunmap_data_sg(cmd);
-	target_complete_cmd(cmd, GOOD);
-	return 0;
+	if (!rc)
+		target_complete_cmd(cmd, GOOD);
+	return rc;
 }
 
 static inline int core_alua_state_nonoptimized(
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index b05fdc0..634d0f3 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -315,7 +315,7 @@
 }
 EXPORT_SYMBOL(transport_register_session);
 
-static void target_release_session(struct kref *kref)
+void target_release_session(struct kref *kref)
 {
 	struct se_session *se_sess = container_of(kref,
 			struct se_session, sess_kref);
@@ -332,6 +332,12 @@
 
 void target_put_session(struct se_session *se_sess)
 {
+	struct se_portal_group *tpg = se_sess->se_tpg;
+
+	if (tpg->se_tpg_tfo->put_session != NULL) {
+		tpg->se_tpg_tfo->put_session(se_sess);
+		return;
+	}
 	kref_put(&se_sess->sess_kref, target_release_session);
 }
 EXPORT_SYMBOL(target_put_session);
diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c
index cb99da9..87901fa 100644
--- a/drivers/target/tcm_fc/tfc_sess.c
+++ b/drivers/target/tcm_fc/tfc_sess.c
@@ -58,7 +58,8 @@
 	struct ft_tport *tport;
 	int i;
 
-	tport = rcu_dereference(lport->prov[FC_TYPE_FCP]);
+	tport = rcu_dereference_protected(lport->prov[FC_TYPE_FCP],
+					  lockdep_is_held(&ft_lport_lock));
 	if (tport && tport->tpg)
 		return tport;
 
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index d3d91da..944eaeb 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -214,24 +214,24 @@
 	/* already configured */
 	if (info->intf != NULL)
 		return 0;
-
+	/*
+	 * If the toolstack (or the hypervisor) hasn't set these values, the
+	 * default value is 0. Even though mfn = 0 and evtchn = 0 are
+	 * theoretically correct values, in practice they never are and they
+	 * mean that a legacy toolstack hasn't initialized the pv console correctly.
+	 */
 	r = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v);
-	if (r < 0) {
-		kfree(info);
-		return -ENODEV;
-	}
+	if (r < 0 || v == 0)
+		goto err;
 	info->evtchn = v;
-	hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v);
-	if (r < 0) {
-		kfree(info);
-		return -ENODEV;
-	}
+	v = 0;
+	r = hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v);
+	if (r < 0 || v == 0)
+		goto err;
 	mfn = v;
 	info->intf = ioremap(mfn << PAGE_SHIFT, PAGE_SIZE);
-	if (info->intf == NULL) {
-		kfree(info);
-		return -ENODEV;
-	}
+	if (info->intf == NULL)
+		goto err;
 	info->vtermno = HVC_COOKIE;
 
 	spin_lock(&xencons_lock);
@@ -239,6 +239,9 @@
 	spin_unlock(&xencons_lock);
 
 	return 0;
+err:
+	kfree(info);
+	return -ENODEV;
 }
 
 static int xen_pv_console_init(void)
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 47d061b..6e1958a 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -3113,7 +3113,7 @@
 
 /**
  *	serial8250_register_8250_port - register a serial port
- *	@port: serial port template
+ *	@up: serial port template
  *
  *	Configure the serial port specified by the request. If the
  *	port exists and is in use, it is hung up and unregistered
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 4ad721f..c17923e 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -133,6 +133,10 @@
 struct uart_amba_port {
 	struct uart_port	port;
 	struct clk		*clk;
+	/* Two optional pin states - default & sleep */
+	struct pinctrl		*pinctrl;
+	struct pinctrl_state	*pins_default;
+	struct pinctrl_state	*pins_sleep;
 	const struct vendor_data *vendor;
 	unsigned int		dmacr;		/* dma control reg */
 	unsigned int		im;		/* interrupt mask */
@@ -1312,6 +1316,14 @@
 	unsigned int cr;
 	int retval;
 
+	/* Optionaly enable pins to be muxed in and configured */
+	if (!IS_ERR(uap->pins_default)) {
+		retval = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+		if (retval)
+			dev_err(port->dev,
+				"could not set default pins\n");
+	}
+
 	retval = clk_prepare(uap->clk);
 	if (retval)
 		goto out;
@@ -1420,6 +1432,7 @@
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
 	unsigned int cr;
+	int retval;
 
 	/*
 	 * disable all interrupts
@@ -1462,6 +1475,14 @@
 	 */
 	clk_disable(uap->clk);
 	clk_unprepare(uap->clk);
+	/* Optionally let pins go into sleep states */
+	if (!IS_ERR(uap->pins_sleep)) {
+		retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep);
+		if (retval)
+			dev_err(port->dev,
+				"could not set pins to sleep state\n");
+	}
+
 
 	if (uap->port.dev->platform_data) {
 		struct amba_pl011_data *plat;
@@ -1792,6 +1813,14 @@
 	if (!uap)
 		return -ENODEV;
 
+	/* Allow pins to be muxed in and configured */
+	if (!IS_ERR(uap->pins_default)) {
+		ret = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+		if (ret)
+			dev_err(uap->port.dev,
+				"could not set default pins\n");
+	}
+
 	ret = clk_prepare(uap->clk);
 	if (ret)
 		return ret;
@@ -1844,7 +1873,6 @@
 {
 	struct uart_amba_port *uap;
 	struct vendor_data *vendor = id->data;
-	struct pinctrl *pinctrl;
 	void __iomem *base;
 	int i, ret;
 
@@ -1869,11 +1897,20 @@
 		goto free;
 	}
 
-	pinctrl = devm_pinctrl_get_select_default(&dev->dev);
-	if (IS_ERR(pinctrl)) {
-		ret = PTR_ERR(pinctrl);
+	uap->pinctrl = devm_pinctrl_get(&dev->dev);
+	if (IS_ERR(uap->pinctrl)) {
+		ret = PTR_ERR(uap->pinctrl);
 		goto unmap;
 	}
+	uap->pins_default = pinctrl_lookup_state(uap->pinctrl,
+						 PINCTRL_STATE_DEFAULT);
+	if (IS_ERR(uap->pins_default))
+		dev_err(&dev->dev, "could not get default pinstate\n");
+
+	uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl,
+					       PINCTRL_STATE_SLEEP);
+	if (IS_ERR(uap->pins_sleep))
+		dev_dbg(&dev->dev, "could not get sleep pinstate\n");
 
 	uap->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(uap->clk)) {
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 34bd345..6ae2a58 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -466,7 +466,7 @@
 	spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
-#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL)
+#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
 /*
  *	Wait for transmitter & holding register to empty
  */
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 4604153..1bd9163 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2179,6 +2179,16 @@
 	return 0;
 }
 
+static void sci_cleanup_single(struct sci_port *port)
+{
+	sci_free_gpios(port);
+
+	clk_put(port->iclk);
+	clk_put(port->fclk);
+
+	pm_runtime_disable(port->port.dev);
+}
+
 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
 static void serial_console_putchar(struct uart_port *port, int ch)
 {
@@ -2360,14 +2370,10 @@
 	cpufreq_unregister_notifier(&port->freq_transition,
 				    CPUFREQ_TRANSITION_NOTIFIER);
 
-	sci_free_gpios(port);
-
 	uart_remove_one_port(&sci_uart_driver, &port->port);
 
-	clk_put(port->iclk);
-	clk_put(port->fclk);
+	sci_cleanup_single(port);
 
-	pm_runtime_disable(&dev->dev);
 	return 0;
 }
 
@@ -2385,14 +2391,20 @@
 			   index+1, SCI_NPORTS);
 		dev_notice(&dev->dev, "Consider bumping "
 			   "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
-		return 0;
+		return -EINVAL;
 	}
 
 	ret = sci_init_single(dev, sciport, index, p);
 	if (ret)
 		return ret;
 
-	return uart_add_one_port(&sci_uart_driver, &sciport->port);
+	ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
+	if (ret) {
+		sci_cleanup_single(sciport);
+		return ret;
+	}
+
+	return 0;
 }
 
 static int __devinit sci_probe(struct platform_device *dev)
@@ -2413,24 +2425,22 @@
 
 	ret = sci_probe_single(dev, dev->id, p, sp);
 	if (ret)
-		goto err_unreg;
+		return ret;
 
 	sp->freq_transition.notifier_call = sci_notifier;
 
 	ret = cpufreq_register_notifier(&sp->freq_transition,
 					CPUFREQ_TRANSITION_NOTIFIER);
-	if (unlikely(ret < 0))
-		goto err_unreg;
+	if (unlikely(ret < 0)) {
+		sci_cleanup_single(sp);
+		return ret;
+	}
 
 #ifdef CONFIG_SH_STANDARD_BIOS
 	sh_bios_gdb_detach();
 #endif
 
 	return 0;
-
-err_unreg:
-	sci_remove(dev);
-	return ret;
 }
 
 static int sci_suspend(struct device *dev)
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index c691eea..f5ed3d7 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -46,7 +46,7 @@
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB)		+= misc/
-obj-$(CONFIG_USB)		+= phy/
+obj-$(CONFIG_USB_COMMON)	+= phy/
 obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index f2a120e..36a2a0b 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -567,6 +567,14 @@
 
 	usb_autopm_put_interface(acm->control);
 
+	/*
+	 * Unthrottle device in case the TTY was closed while throttled.
+	 */
+	spin_lock_irq(&acm->read_lock);
+	acm->throttled = 0;
+	acm->throttle_req = 0;
+	spin_unlock_irq(&acm->read_lock);
+
 	if (acm_submit_read_urbs(acm, GFP_KERNEL))
 		goto error_submit_read_urbs;
 
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index ea8b304..8fd398d 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -55,6 +55,15 @@
 		.bInterfaceSubClass = 1,
 		.bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */
 	},
+	{
+		 /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
+		.match_flags        = USB_DEVICE_ID_MATCH_VENDOR |
+				      USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor           = HUAWEI_VENDOR_ID,
+		.bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
+		.bInterfaceSubClass = 1,
+		.bInterfaceProtocol = 57, /* NOTE: CDC ECM control interface! */
+	},
 	{ }
 };
 
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 57ed9e4..622b4a4 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -493,15 +493,6 @@
 
 	pci_save_state(pci_dev);
 
-	/*
-	 * Some systems crash if an EHCI controller is in D3 during
-	 * a sleep transition.  We have to leave such controllers in D0.
-	 */
-	if (hcd->broken_pci_sleep) {
-		dev_dbg(dev, "Staying in PCI D0\n");
-		return retval;
-	}
-
 	/* If the root hub is dead rather than suspended, disallow remote
 	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
 	 * dying, so we only need to check the primary roothub.
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 04fb834..25a7422 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3379,7 +3379,7 @@
 		return 0;
 
 	udev->lpm_disable_count++;
-	if ((udev->u1_params.timeout == 0 && udev->u1_params.timeout == 0))
+	if ((udev->u1_params.timeout == 0 && udev->u2_params.timeout == 0))
 		return 0;
 
 	/* If LPM is enabled, attempt to disable it. */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b548cf1..bdd1c67 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1838,7 +1838,6 @@
 		intfc = cp->intf_cache[i];
 		intf->altsetting = intfc->altsetting;
 		intf->num_altsetting = intfc->num_altsetting;
-		intf->intf_assoc = find_iad(dev, cp, i);
 		kref_get(&intfc->ref);
 
 		alt = usb_altnum_to_altsetting(intf, 0);
@@ -1851,6 +1850,8 @@
 		if (!alt)
 			alt = &intf->altsetting[0];
 
+		intf->intf_assoc =
+			find_iad(dev, cp, alt->desc.bInterfaceNumber);
 		intf->cur_altsetting = alt;
 		usb_enable_interface(dev, intf, true);
 		intf->dev.parent = &dev->dev;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 3df1a19..ec70df7 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1091,7 +1091,7 @@
 		if (r == req) {
 			/* wait until it is processed */
 			dwc3_stop_active_transfer(dwc, dep->number);
-			goto out0;
+			goto out1;
 		}
 		dev_err(dwc->dev, "request %p was not queued to %s\n",
 				request, ep->name);
@@ -1099,6 +1099,7 @@
 		goto out0;
 	}
 
+out1:
 	/* giveback the request */
 	dwc3_gadget_giveback(dep, req, -ECONNRESET);
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index e23bf79..9a9bced 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -599,12 +599,6 @@
 
 	spin_lock_irqsave(&ep->udc->lock, flags);
 
-	if (ep->ep.desc) {
-		spin_unlock_irqrestore(&ep->udc->lock, flags);
-		DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
-		return -EBUSY;
-	}
-
 	ep->ep.desc = desc;
 	ep->ep.maxpacket = maxpacket;
 
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 51881f3..b09452d 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -1596,7 +1596,7 @@
 	ep = container_of(_ep, struct qe_ep, ep);
 
 	/* catch various bogus parameters */
-	if (!_ep || !desc || ep->ep.desc || _ep->name == ep_name[0] ||
+	if (!_ep || !desc || _ep->name == ep_name[0] ||
 			(desc->bDescriptorType != USB_DT_ENDPOINT))
 		return -EINVAL;
 
diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h
index 4c07ca9..7026919 100644
--- a/drivers/usb/gadget/fsl_qe_udc.h
+++ b/drivers/usb/gadget/fsl_qe_udc.h
@@ -153,10 +153,10 @@
 #define USB_BUSMODE_DTB		0x02
 
 /* Endpoint basic handle */
-#define ep_index(EP)		((EP)->desc->bEndpointAddress & 0xF)
+#define ep_index(EP)		((EP)->ep.desc->bEndpointAddress & 0xF)
 #define ep_maxpacket(EP)	((EP)->ep.maxpacket)
 #define ep_is_in(EP)	((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
-			USB_DIR_IN) : ((EP)->desc->bEndpointAddress \
+			USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
 			& USB_DIR_IN) == USB_DIR_IN)
 
 /* ep0 transfer state */
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 28316858..bc6f9bb 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -567,7 +567,7 @@
 	ep = container_of(_ep, struct fsl_ep, ep);
 
 	/* catch various bogus parameters */
-	if (!_ep || !desc || ep->ep.desc
+	if (!_ep || !desc
 			|| (desc->bDescriptorType != USB_DT_ENDPOINT))
 		return -EINVAL;
 
@@ -2575,7 +2575,7 @@
 	/* for ep0: the desc defined here;
 	 * for other eps, gadget layer called ep_enable with defined desc
 	 */
-	udc_controller->eps[0].desc = &fsl_ep0_desc;
+	udc_controller->eps[0].ep.desc = &fsl_ep0_desc;
 	udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD;
 
 	/* setup the udc->eps[] for non-control endpoints and link
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index 5cd7b7e..f61a967 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -568,10 +568,10 @@
 /*
  * ### internal used help routines.
  */
-#define ep_index(EP)		((EP)->desc->bEndpointAddress&0xF)
+#define ep_index(EP)		((EP)->ep.desc->bEndpointAddress&0xF)
 #define ep_maxpacket(EP)	((EP)->ep.maxpacket)
 #define ep_is_in(EP)	( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
-			USB_DIR_IN ):((EP)->desc->bEndpointAddress \
+			USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
 			& USB_DIR_IN)==USB_DIR_IN)
 #define get_ep_by_pipe(udc, pipe)	((pipe == 1)? &udc->eps[0]: \
 					&udc->eps[pipe])
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index b241e6c..3d28fb9 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -102,7 +102,7 @@
 	unsigned long	flags;
 
 	ep = container_of(_ep, struct goku_ep, ep);
-	if (!_ep || !desc || ep->ep.desc
+	if (!_ep || !desc
 			|| desc->bDescriptorType != USB_DT_ENDPOINT)
 		return -EINVAL;
 	dev = ep->dev;
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index 262acfd..2ab0388 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -61,6 +61,7 @@
 #include <mach/irqs.h>
 #include <mach/board.h>
 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
+#include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #endif
 
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index dbcd132..117a4bb 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -464,7 +464,7 @@
 	ep = container_of(_ep, struct mv_ep, ep);
 	udc = ep->udc;
 
-	if (!_ep || !desc || ep->ep.desc
+	if (!_ep || !desc
 			|| desc->bDescriptorType != USB_DT_ENDPOINT)
 		return -EINVAL;
 
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 7ba3246..a460e8c 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -153,7 +153,7 @@
 	u16		maxp;
 
 	/* catch various bogus parameters */
-	if (!_ep || !desc || ep->ep.desc
+	if (!_ep || !desc
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| ep->bEndpointAddress != desc->bEndpointAddress
 			|| ep->maxpacket < usb_endpoint_maxp(desc)) {
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index d7c8cb3..f7ff9e8 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -218,7 +218,7 @@
 	struct pxa25x_udc       *dev;
 
 	ep = container_of (_ep, struct pxa25x_ep, ep);
-	if (!_ep || !desc || ep->ep.desc || _ep->name == ep0name
+	if (!_ep || !desc || _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| ep->bEndpointAddress != desc->bEndpointAddress
 			|| ep->fifo_size < usb_endpoint_maxp (desc)) {
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 36c6836..236b271 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -760,7 +760,7 @@
 	u32 ecr = 0;
 
 	hsep = our_ep(_ep);
-	if (!_ep || !desc || hsep->ep.desc || _ep->name == ep0name
+	if (!_ep || !desc || _ep->name == ep0name
 		|| desc->bDescriptorType != USB_DT_ENDPOINT
 		|| hsep->bEndpointAddress != desc->bEndpointAddress
 		|| ep_maxpacket(hsep) < usb_endpoint_maxp(desc))
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 3de71d3..f2e51f5 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1062,7 +1062,7 @@
 
 	ep = to_s3c2410_ep(_ep);
 
-	if (!_ep || !desc || ep->ep.desc
+	if (!_ep || !desc
 			|| _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT)
 		return -EINVAL;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index b100f5f..800be38 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -671,7 +671,9 @@
 	hw = ehci->async->hw;
 	hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
 	hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
+#if defined(CONFIG_PPC_PS3)
 	hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7));	/* I = 1 */
+#endif
 	hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
 	hw->hw_qtd_next = EHCI_LIST_END(ehci);
 	ehci->async->qh_state = QH_STATE_LINKED;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index a44294d..17cfb8a 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -43,6 +43,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/gpio.h>
+#include <linux/clk.h>
 
 /* EHCI Register Set */
 #define EHCI_INSNREG04					(0xA0)
@@ -55,6 +56,15 @@
 #define	EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT		8
 #define	EHCI_INSNREG05_ULPI_WRDATA_SHIFT		0
 
+/* Errata i693 */
+static struct clk	*utmi_p1_fck;
+static struct clk	*utmi_p2_fck;
+static struct clk	*xclk60mhsp1_ck;
+static struct clk	*xclk60mhsp2_ck;
+static struct clk	*usbhost_p1_fck;
+static struct clk	*usbhost_p2_fck;
+static struct clk	*init_60m_fclk;
+
 /*-------------------------------------------------------------------------*/
 
 static const struct hc_driver ehci_omap_hc_driver;
@@ -70,6 +80,41 @@
 	return __raw_readl(base + reg);
 }
 
+/* Erratum i693 workaround sequence */
+static void omap_ehci_erratum_i693(struct ehci_hcd *ehci)
+{
+	int ret = 0;
+
+	/* Switch to the internal 60 MHz clock */
+	ret = clk_set_parent(utmi_p1_fck, init_60m_fclk);
+	if (ret != 0)
+		ehci_err(ehci, "init_60m_fclk set parent"
+			"failed error:%d\n", ret);
+
+	ret = clk_set_parent(utmi_p2_fck, init_60m_fclk);
+	if (ret != 0)
+		ehci_err(ehci, "init_60m_fclk set parent"
+			"failed error:%d\n", ret);
+
+	clk_enable(usbhost_p1_fck);
+	clk_enable(usbhost_p2_fck);
+
+	/* Wait 1ms and switch back to the external clock */
+	mdelay(1);
+	ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck);
+	if (ret != 0)
+		ehci_err(ehci, "xclk60mhsp1_ck set parent"
+			"failed error:%d\n", ret);
+
+	ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck);
+	if (ret != 0)
+		ehci_err(ehci, "xclk60mhsp2_ck set parent"
+			"failed error:%d\n", ret);
+
+	clk_disable(usbhost_p1_fck);
+	clk_disable(usbhost_p2_fck);
+}
+
 static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port)
 {
 	struct usb_hcd	*hcd = dev_get_drvdata(&pdev->dev);
@@ -100,6 +145,50 @@
 	}
 }
 
+static int omap_ehci_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength
+)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+	u32 __iomem *status_reg = &ehci->regs->port_status[
+				(wIndex & 0xff) - 1];
+	u32		temp;
+	unsigned long	flags;
+	int		retval = 0;
+
+	spin_lock_irqsave(&ehci->lock, flags);
+
+	if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
+		temp = ehci_readl(ehci, status_reg);
+		if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
+			retval = -EPIPE;
+			goto done;
+		}
+
+		temp &= ~PORT_WKCONN_E;
+		temp |= PORT_WKDISC_E | PORT_WKOC_E;
+		ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
+		omap_ehci_erratum_i693(ehci);
+
+		set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
+		goto done;
+	}
+
+	spin_unlock_irqrestore(&ehci->lock, flags);
+
+	/* Handle the hub control events here */
+	return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+done:
+	spin_unlock_irqrestore(&ehci->lock, flags);
+	return retval;
+}
+
 static void disable_put_regulator(
 		struct ehci_hcd_omap_platform_data *pdata)
 {
@@ -264,8 +353,76 @@
 	/* root ports should always stay powered */
 	ehci_port_power(omap_ehci, 1);
 
+	/* get clocks */
+	utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
+	if (IS_ERR(utmi_p1_fck)) {
+		ret = PTR_ERR(utmi_p1_fck);
+		dev_err(dev, "utmi_p1_gfclk failed error:%d\n",	ret);
+		goto err_add_hcd;
+	}
+
+	xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+	if (IS_ERR(xclk60mhsp1_ck)) {
+		ret = PTR_ERR(xclk60mhsp1_ck);
+		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
+		goto err_utmi_p1_fck;
+	}
+
+	utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
+	if (IS_ERR(utmi_p2_fck)) {
+		ret = PTR_ERR(utmi_p2_fck);
+		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
+		goto err_xclk60mhsp1_ck;
+	}
+
+	xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+	if (IS_ERR(xclk60mhsp2_ck)) {
+		ret = PTR_ERR(xclk60mhsp2_ck);
+		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
+		goto err_utmi_p2_fck;
+	}
+
+	usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
+	if (IS_ERR(usbhost_p1_fck)) {
+		ret = PTR_ERR(usbhost_p1_fck);
+		dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
+		goto err_xclk60mhsp2_ck;
+	}
+
+	usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
+	if (IS_ERR(usbhost_p2_fck)) {
+		ret = PTR_ERR(usbhost_p2_fck);
+		dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
+		goto err_usbhost_p1_fck;
+	}
+
+	init_60m_fclk = clk_get(dev, "init_60m_fclk");
+	if (IS_ERR(init_60m_fclk)) {
+		ret = PTR_ERR(init_60m_fclk);
+		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
+		goto err_usbhost_p2_fck;
+	}
+
 	return 0;
 
+err_usbhost_p2_fck:
+	clk_put(usbhost_p2_fck);
+
+err_usbhost_p1_fck:
+	clk_put(usbhost_p1_fck);
+
+err_xclk60mhsp2_ck:
+	clk_put(xclk60mhsp2_ck);
+
+err_utmi_p2_fck:
+	clk_put(utmi_p2_fck);
+
+err_xclk60mhsp1_ck:
+	clk_put(xclk60mhsp1_ck);
+
+err_utmi_p1_fck:
+	clk_put(utmi_p1_fck);
+
 err_add_hcd:
 	disable_put_regulator(pdata);
 	pm_runtime_put_sync(dev);
@@ -294,6 +451,15 @@
 	disable_put_regulator(dev->platform_data);
 	iounmap(hcd->regs);
 	usb_put_hcd(hcd);
+
+	clk_put(utmi_p1_fck);
+	clk_put(utmi_p2_fck);
+	clk_put(xclk60mhsp1_ck);
+	clk_put(xclk60mhsp2_ck);
+	clk_put(usbhost_p1_fck);
+	clk_put(usbhost_p2_fck);
+	clk_put(init_60m_fclk);
+
 	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
 
@@ -364,7 +530,7 @@
 	 * root hub support
 	 */
 	.hub_status_data	= ehci_hub_status_data,
-	.hub_control		= ehci_hub_control,
+	.hub_control		= omap_ehci_hub_control,
 	.bus_suspend		= ehci_bus_suspend,
 	.bus_resume		= ehci_bus_resume,
 
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index bc94d7b..1234817 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -144,14 +144,6 @@
 			hcd->has_tt = 1;
 			tdi_reset(ehci);
 		}
-		if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
-			/* EHCI #1 or #2 on 6 Series/C200 Series chipset */
-			if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
-				ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
-				hcd->broken_pci_sleep = 1;
-				device_set_wakeup_capable(&pdev->dev, false);
-			}
-		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index ca819cd..e7cb392 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -126,8 +126,7 @@
 		goto fail_create_hcd;
 	}
 
-	if (pdev->dev.platform_data != NULL)
-		pdata = pdev->dev.platform_data;
+	pdata = pdev->dev.platform_data;
 
 	/* initialize hcd */
 	hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev,
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index 9c2cc46..e9713d5 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -270,14 +270,12 @@
  *
  * Properly shutdown the hcd, call driver's shutdown routine.
  */
-static int ehci_hcd_xilinx_of_shutdown(struct platform_device *op)
+static void ehci_hcd_xilinx_of_shutdown(struct platform_device *op)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
 
 	if (hcd->driver->shutdown)
 		hcd->driver->shutdown(hcd);
-
-	return 0;
 }
 
 
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 836772d..2f3619e 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -317,7 +317,7 @@
 }
 
 /* Carry out the final steps of resuming the controller device */
-static void ohci_finish_controller_resume(struct usb_hcd *hcd)
+static void __maybe_unused ohci_finish_controller_resume(struct usb_hcd *hcd)
 {
 	struct ohci_hcd		*ohci = hcd_to_ohci(hcd);
 	int			port;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index ec4338e..77689bd 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -793,10 +793,9 @@
 		struct xhci_virt_device *virt_dev,
 		int slot_id)
 {
-	struct list_head *tt;
 	struct list_head *tt_list_head;
-	struct list_head *tt_next;
-	struct xhci_tt_bw_info *tt_info;
+	struct xhci_tt_bw_info *tt_info, *next;
+	bool slot_found = false;
 
 	/* If the device never made it past the Set Address stage,
 	 * it may not have the real_port set correctly.
@@ -808,34 +807,16 @@
 	}
 
 	tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
-	if (list_empty(tt_list_head))
-		return;
-
-	list_for_each(tt, tt_list_head) {
-		tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
-		if (tt_info->slot_id == slot_id)
+	list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+		/* Multi-TT hubs will have more than one entry */
+		if (tt_info->slot_id == slot_id) {
+			slot_found = true;
+			list_del(&tt_info->tt_list);
+			kfree(tt_info);
+		} else if (slot_found) {
 			break;
+		}
 	}
-	/* Cautionary measure in case the hub was disconnected before we
-	 * stored the TT information.
-	 */
-	if (tt_info->slot_id != slot_id)
-		return;
-
-	tt_next = tt->next;
-	tt_info = list_entry(tt, struct xhci_tt_bw_info,
-			tt_list);
-	/* Multi-TT hubs will have more than one entry */
-	do {
-		list_del(tt);
-		kfree(tt_info);
-		tt = tt_next;
-		if (list_empty(tt_list_head))
-			break;
-		tt_next = tt->next;
-		tt_info = list_entry(tt, struct xhci_tt_bw_info,
-				tt_list);
-	} while (tt_info->slot_id == slot_id);
 }
 
 int xhci_alloc_tt_info(struct xhci_hcd *xhci,
@@ -1791,17 +1772,9 @@
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 	struct dev_info	*dev_info, *next;
-	struct list_head *tt_list_head;
-	struct list_head *tt;
-	struct list_head *endpoints;
-	struct list_head *ep, *q;
-	struct xhci_tt_bw_info *tt_info;
-	struct xhci_interval_bw_table *bwt;
-	struct xhci_virt_ep *virt_ep;
-
 	unsigned long	flags;
 	int size;
-	int i;
+	int i, j, num_ports;
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
@@ -1860,21 +1833,22 @@
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
-	bwt = &xhci->rh_bw->bw_table;
-	for (i = 0; i < XHCI_MAX_INTERVAL; i++) {
-		endpoints = &bwt->interval_bw[i].endpoints;
-		list_for_each_safe(ep, q, endpoints) {
-			virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list);
-			list_del(&virt_ep->bw_endpoint_list);
-			kfree(virt_ep);
+	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	for (i = 0; i < num_ports; i++) {
+		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
+		for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
+			struct list_head *ep = &bwt->interval_bw[j].endpoints;
+			while (!list_empty(ep))
+				list_del_init(ep->next);
 		}
 	}
 
-	tt_list_head = &xhci->rh_bw->tts;
-	list_for_each_safe(tt, q, tt_list_head) {
-		tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
-		list_del(tt);
-		kfree(tt_info);
+	for (i = 0; i < num_ports; i++) {
+		struct xhci_tt_bw_info *tt, *n;
+		list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) {
+			list_del(&tt->tt_list);
+			kfree(tt);
+		}
 	}
 
 	xhci->num_usb2_ports = 0;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index afdc73e..a979cd0 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -795,8 +795,8 @@
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_CSS;
 	xhci_writel(xhci, command, &xhci->op_regs->command);
-	if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) {
-		xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n");
+	if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) {
+		xhci_warn(xhci, "WARN: xHC save state timeout\n");
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
 	}
@@ -848,8 +848,8 @@
 		command |= CMD_CRS;
 		xhci_writel(xhci, command, &xhci->op_regs->command);
 		if (handshake(xhci, &xhci->op_regs->status,
-			      STS_RESTORE, 0, 10*100)) {
-			xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n");
+			      STS_RESTORE, 0, 10 * 1000)) {
+			xhci_warn(xhci, "WARN: xHC restore state timeout\n");
 			spin_unlock_irq(&xhci->lock);
 			return -ETIMEDOUT;
 		}
@@ -3906,7 +3906,7 @@
 	default:
 		dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n",
 				__func__);
-		return -EINVAL;
+		return USB3_LPM_DISABLED;
 	}
 
 	if (sel <= max_sel_pel && pel <= max_sel_pel)
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 768b4b5..9d63ba4 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -34,6 +34,7 @@
 #include <linux/dma-mapping.h>
 
 #include <mach/cputype.h>
+#include <mach/hardware.h>
 
 #include <asm/mach-types.h>
 
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
index 046c844..371baa0 100644
--- a/drivers/usb/musb/davinci.h
+++ b/drivers/usb/musb/davinci.h
@@ -15,7 +15,7 @@
  */
 
 /* Integrated highspeed/otg PHY */
-#define USBPHY_CTL_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define USBPHY_CTL_PADDR	0x01c40034
 #define USBPHY_DATAPOL		BIT(11)	/* (dm355) switch D+/D- */
 #define USBPHY_PHYCLKGD		BIT(8)
 #define USBPHY_SESNDEN		BIT(7)	/* v(sess_end) comparator */
@@ -27,7 +27,7 @@
 #define USBPHY_OTGPDWN		BIT(1)
 #define USBPHY_PHYPDWN		BIT(0)
 
-#define DM355_DEEPSLEEP_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x48)
+#define DM355_DEEPSLEEP_PADDR	0x01c40048
 #define DRVVBUS_FORCE		BIT(2)
 #define DRVVBUS_OVERRIDE	BIT(1)
 
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f42c29b..95918da 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1232,6 +1232,7 @@
 	}
 
 	musb_ep->desc = NULL;
+	musb_ep->end_point.desc = NULL;
 
 	/* abort all pending DMA and requests */
 	nuke(musb_ep, -ESHUTDOWN);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index ef8d744..e090c79 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -375,11 +375,21 @@
 	 */
 	if (list_empty(&qh->hep->urb_list)) {
 		struct list_head	*head;
+		struct dma_controller	*dma = musb->dma_controller;
 
-		if (is_in)
+		if (is_in) {
 			ep->rx_reinit = 1;
-		else
+			if (ep->rx_channel) {
+				dma->channel_release(ep->rx_channel);
+				ep->rx_channel = NULL;
+			}
+		} else {
 			ep->tx_reinit = 1;
+			if (ep->tx_channel) {
+				dma->channel_release(ep->tx_channel);
+				ep->tx_channel = NULL;
+			}
+		}
 
 		/* Clobber old pointers to this qh */
 		musb_ep_set_qh(ep, is_in, NULL);
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index d2a9a8e..0eabb049 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -305,9 +305,8 @@
 
 		regulator_enable(twl->usb3v3);
 		twl->asleep = 1;
-		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
-		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
-								0x10);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
 		status = USB_EVENT_ID;
 		otg->default_a = true;
 		twl->phy.state = OTG_STATE_A_IDLE;
@@ -316,12 +315,10 @@
 		atomic_notifier_call_chain(&twl->phy.notifier, status,
 							otg->gadget);
 	} else  {
-		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
-								0x10);
-		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
-								0x1);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
 	}
-	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
+	twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
 
 	return IRQ_HANDLED;
 }
@@ -343,7 +340,7 @@
 {
 	struct twl6030_usb *twl = phy_to_twl(x);
 
-	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
 	twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
 	twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
 
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 3cfabcb..e7cf84f 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -2,11 +2,11 @@
 # Physical Layer USB driver configuration
 #
 comment "USB Physical Layer drivers"
-	depends on USB
+	depends on USB || USB_GADGET
 
 config USB_ISP1301
 	tristate "NXP ISP1301 USB transceiver support"
-	depends on USB
+	depends on USB || USB_GADGET
 	depends on I2C
 	help
 	  Say Y here to add support for the NXP ISP1301 USB transceiver driver.
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 1b19262..1e71079 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -82,6 +82,7 @@
 	{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
 	{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
 	{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+	{ USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
 	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
 	{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
 	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
@@ -92,6 +93,7 @@
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
 	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+	{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
 	{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
 	{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
 	{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
@@ -133,7 +135,13 @@
 	{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
 	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
 	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+	{ USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
+	{ USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+	{ USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
+	{ USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
+	{ USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
+	{ USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
 	{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
@@ -145,7 +153,11 @@
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
+	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
+	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
+	{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
 	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8c084ea..bc912e5 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -737,6 +737,7 @@
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index f3c7c78..5661c7e 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -784,6 +784,7 @@
 #define RTSYSTEMS_VID			0x2100	/* Vendor ID */
 #define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
 #define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
+#define RTSYSTEMS_RTS01_PID		0x9e57	/* USB-RTS01 Radio Cable */
 
 
 /*
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 105a6d8..9b026bf 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -39,13 +39,6 @@
 
 static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
 
-/* we want to look at all devices, as the vendor/product id can change
- * depending on the command line argument */
-static const struct usb_device_id generic_serial_ids[] = {
-	{.driver_info = 42},
-	{}
-};
-
 /* All of the device info needed for the Generic Serial Converter */
 struct usb_serial_driver usb_serial_generic_device = {
 	.driver = {
@@ -79,7 +72,8 @@
 		USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;
 
 	/* register our generic driver with ourselves */
-	retval = usb_serial_register_drivers(serial_drivers, "usbserial_generic", generic_serial_ids);
+	retval = usb_serial_register_drivers(serial_drivers,
+			"usbserial_generic", generic_device_ids);
 #endif
 	return retval;
 }
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index d0ec1aa..a71fa0a 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -309,13 +309,16 @@
 			MCT_U232_SET_REQUEST_TYPE,
 			0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
 			WDR_TIMEOUT);
-	if (rc < 0)
-		dev_err(&serial->dev->dev,
-			"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+	kfree(buf);
+
 	dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
 
-	kfree(buf);
-	return rc;
+	if (rc < 0) {
+		dev_err(&serial->dev->dev,
+			"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+		return rc;
+	}
+	return 0;
 } /* mct_u232_set_modem_ctrl */
 
 static int mct_u232_get_modem_stat(struct usb_serial *serial,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 29160f8b..57eca24 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -190,7 +190,7 @@
 
 static int device_type;
 
-static const struct usb_device_id id_table[] __devinitconst = {
+static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)},
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 1aae902..adf8ce7 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -47,6 +47,7 @@
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
+static void option_release(struct usb_serial *serial);
 static int option_send_setup(struct usb_serial_port *port);
 static void option_instat_callback(struct urb *urb);
 
@@ -150,6 +151,7 @@
 #define HUAWEI_PRODUCT_E14AC			0x14AC
 #define HUAWEI_PRODUCT_K3806			0x14AE
 #define HUAWEI_PRODUCT_K4605			0x14C6
+#define HUAWEI_PRODUCT_K5005			0x14C8
 #define HUAWEI_PRODUCT_K3770			0x14C9
 #define HUAWEI_PRODUCT_K3771			0x14CA
 #define HUAWEI_PRODUCT_K4510			0x14CB
@@ -234,6 +236,7 @@
 #define NOVATELWIRELESS_PRODUCT_G1		0xA001
 #define NOVATELWIRELESS_PRODUCT_G1_M		0xA002
 #define NOVATELWIRELESS_PRODUCT_G2		0xA010
+#define NOVATELWIRELESS_PRODUCT_MC551		0xB001
 
 /* AMOI PRODUCTS */
 #define AMOI_VENDOR_ID				0x1614
@@ -425,7 +428,7 @@
 #define SAMSUNG_VENDOR_ID                       0x04e8
 #define SAMSUNG_PRODUCT_GT_B3730                0x6889
 
-/* YUGA products  www.yuga-info.com*/
+/* YUGA products  www.yuga-info.com gavin.kx@qq.com */
 #define YUGA_VENDOR_ID				0x257A
 #define YUGA_PRODUCT_CEM600			0x1601
 #define YUGA_PRODUCT_CEM610			0x1602
@@ -442,6 +445,8 @@
 #define YUGA_PRODUCT_CEU516			0x160C
 #define YUGA_PRODUCT_CEU528			0x160D
 #define YUGA_PRODUCT_CEU526			0x160F
+#define YUGA_PRODUCT_CEU881			0x161F
+#define YUGA_PRODUCT_CEU882			0x162F
 
 #define YUGA_PRODUCT_CWM600			0x2601
 #define YUGA_PRODUCT_CWM610			0x2602
@@ -457,23 +462,26 @@
 #define YUGA_PRODUCT_CWU518			0x260B
 #define YUGA_PRODUCT_CWU516			0x260C
 #define YUGA_PRODUCT_CWU528			0x260D
+#define YUGA_PRODUCT_CWU581			0x260E
 #define YUGA_PRODUCT_CWU526			0x260F
+#define YUGA_PRODUCT_CWU582			0x261F
+#define YUGA_PRODUCT_CWU583			0x262F
 
-#define YUGA_PRODUCT_CLM600			0x2601
-#define YUGA_PRODUCT_CLM610			0x2602
-#define YUGA_PRODUCT_CLM500			0x2603
-#define YUGA_PRODUCT_CLM510			0x2604
-#define YUGA_PRODUCT_CLM800			0x2605
-#define YUGA_PRODUCT_CLM900			0x2606
+#define YUGA_PRODUCT_CLM600			0x3601
+#define YUGA_PRODUCT_CLM610			0x3602
+#define YUGA_PRODUCT_CLM500			0x3603
+#define YUGA_PRODUCT_CLM510			0x3604
+#define YUGA_PRODUCT_CLM800			0x3605
+#define YUGA_PRODUCT_CLM900			0x3606
 
-#define YUGA_PRODUCT_CLU718			0x2607
-#define YUGA_PRODUCT_CLU716			0x2608
-#define YUGA_PRODUCT_CLU728			0x2609
-#define YUGA_PRODUCT_CLU726			0x260A
-#define YUGA_PRODUCT_CLU518			0x260B
-#define YUGA_PRODUCT_CLU516			0x260C
-#define YUGA_PRODUCT_CLU528			0x260D
-#define YUGA_PRODUCT_CLU526			0x260F
+#define YUGA_PRODUCT_CLU718			0x3607
+#define YUGA_PRODUCT_CLU716			0x3608
+#define YUGA_PRODUCT_CLU728			0x3609
+#define YUGA_PRODUCT_CLU726			0x360A
+#define YUGA_PRODUCT_CLU518			0x360B
+#define YUGA_PRODUCT_CLU516			0x360C
+#define YUGA_PRODUCT_CLU528			0x360D
+#define YUGA_PRODUCT_CLU526			0x360F
 
 /* Viettel products */
 #define VIETTEL_VENDOR_ID			0x2262
@@ -490,6 +498,10 @@
 /* MediaTek products */
 #define MEDIATEK_VENDOR_ID			0x0e8d
 
+/* Cellient products */
+#define CELLIENT_VENDOR_ID			0x2692
+#define CELLIENT_PRODUCT_MEN200			0x9005
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -666,6 +678,11 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },
@@ -722,6 +739,8 @@
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
+	/* Novatel Ovation MC551 a.k.a. Verizon USB551L */
+	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
 
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -1209,6 +1228,11 @@
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU881) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU882) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU581) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU582) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU583) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
@@ -1216,6 +1240,7 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) },        /* MediaTek MT6276M modem & app port */
+	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -1245,7 +1270,7 @@
 	.ioctl             = usb_wwan_ioctl,
 	.attach            = usb_wwan_startup,
 	.disconnect        = usb_wwan_disconnect,
-	.release           = usb_wwan_release,
+	.release           = option_release,
 	.read_int_callback = option_instat_callback,
 #ifdef CONFIG_PM
 	.suspend           = usb_wwan_suspend,
@@ -1259,35 +1284,6 @@
 
 static bool debug;
 
-/* per port private data */
-
-#define N_IN_URB 4
-#define N_OUT_URB 4
-#define IN_BUFLEN 4096
-#define OUT_BUFLEN 4096
-
-struct option_port_private {
-	/* Input endpoints and buffer for this port */
-	struct urb *in_urbs[N_IN_URB];
-	u8 *in_buffer[N_IN_URB];
-	/* Output endpoints and buffer for this port */
-	struct urb *out_urbs[N_OUT_URB];
-	u8 *out_buffer[N_OUT_URB];
-	unsigned long out_busy;		/* Bit vector of URBs in use */
-	int opened;
-	struct usb_anchor delayed;
-
-	/* Settings for the port */
-	int rts_state;	/* Handshaking pins (outputs) */
-	int dtr_state;
-	int cts_state;	/* Handshaking pins (inputs) */
-	int dsr_state;
-	int dcd_state;
-	int ri_state;
-
-	unsigned long tx_start_time[N_OUT_URB];
-};
-
 module_usb_serial_driver(serial_drivers, option_ids);
 
 static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
@@ -1356,12 +1352,22 @@
 	return 0;
 }
 
+static void option_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
+
+	usb_wwan_release(serial);
+
+	kfree(priv);
+}
+
 static void option_instat_callback(struct urb *urb)
 {
 	int err;
 	int status = urb->status;
 	struct usb_serial_port *port =  urb->context;
-	struct option_port_private *portdata = usb_get_serial_port_data(port);
+	struct usb_wwan_port_private *portdata =
+					usb_get_serial_port_data(port);
 
 	dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
 
@@ -1421,7 +1427,7 @@
 	struct usb_serial *serial = port->serial;
 	struct usb_wwan_intf_private *intfdata =
 		(struct usb_wwan_intf_private *) serial->private;
-	struct option_port_private *portdata;
+	struct usb_wwan_port_private *portdata;
 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
 	int val = 0;
 
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 0d5fe59..996015c 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -105,7 +105,13 @@
 	{USB_DEVICE(0x1410, 0xa021)},	/* Novatel Gobi 3000 Composite */
 	{USB_DEVICE(0x413c, 0x8193)},	/* Dell Gobi 3000 QDL */
 	{USB_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */
+	{USB_DEVICE(0x1199, 0x9010)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9012)},	/* Sierra Wireless Gobi 3000 QDL */
 	{USB_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+	{USB_DEVICE(0x1199, 0x9014)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9015)},	/* Sierra Wireless Gobi 3000 Modem device */
+	{USB_DEVICE(0x1199, 0x9018)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9019)},	/* Sierra Wireless Gobi 3000 Modem device */
 	{USB_DEVICE(0x12D1, 0x14F0)},	/* Sony Gobi 3000 QDL */
 	{USB_DEVICE(0x12D1, 0x14F1)},	/* Sony Gobi 3000 Composite */
 	{ }				/* Terminating entry */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ba54a0a..d423d36 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -294,6 +294,10 @@
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+	/* AT&T Direct IP LTE modems */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
 	{ USB_DEVICE(0x0f3d, 0x68A3), 	/* Airprime/Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 6a1b609..27483f9 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -659,12 +659,14 @@
 static struct usb_serial_driver *search_serial_device(
 					struct usb_interface *iface)
 {
-	const struct usb_device_id *id;
+	const struct usb_device_id *id = NULL;
 	struct usb_serial_driver *drv;
+	struct usb_driver *driver = to_usb_driver(iface->dev.driver);
 
 	/* Check if the usb id matches a known device */
 	list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
-		id = get_iface_id(drv, iface);
+		if (drv->usb_driver == driver)
+			id = get_iface_id(drv, iface);
 		if (id)
 			return drv;
 	}
@@ -755,7 +757,7 @@
 
 		if (retval) {
 			dbg("sub driver rejected device");
-			kfree(serial);
+			usb_serial_put(serial);
 			module_put(type->driver.owner);
 			return retval;
 		}
@@ -827,7 +829,7 @@
 		 */
 		if (num_bulk_in == 0 || num_bulk_out == 0) {
 			dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n");
-			kfree(serial);
+			usb_serial_put(serial);
 			module_put(type->driver.owner);
 			return -ENODEV;
 		}
@@ -841,7 +843,7 @@
 		if (num_ports == 0) {
 			dev_err(&interface->dev,
 			    "Generic device with no bulk out, not allowed.\n");
-			kfree(serial);
+			usb_serial_put(serial);
 			module_put(type->driver.owner);
 			return -EIO;
 		}
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index a324a5d..11418da 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -202,6 +202,12 @@
 		if (us->fflags & US_FL_NO_READ_CAPACITY_16)
 			sdev->no_read_capacity_16 = 1;
 
+		/*
+		 * Many devices do not respond properly to READ_CAPACITY_16.
+		 * Tell the SCSI layer to try READ_CAPACITY_10 first.
+		 */
+		sdev->try_rc_10_first = 1;
+
 		/* assume SPC3 or latter devices support sense size > 18 */
 		if (sdev->scsi_level > SCSI_SPC_2)
 			us->fflags |= US_FL_SANE_SENSE;
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 94dbd25..112156f 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -191,7 +191,9 @@
 	struct vhost_dev *dev = data;
 	struct vhost_work *work = NULL;
 	unsigned uninitialized_var(seq);
+	mm_segment_t oldfs = get_fs();
 
+	set_fs(USER_DS);
 	use_mm(dev->mm);
 
 	for (;;) {
@@ -229,6 +231,7 @@
 
 	}
 	unuse_mm(dev->mm);
+	set_fs(oldfs);
 	return 0;
 }
 
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index fa2b037..2979292 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -88,7 +88,7 @@
 
 config LCD_TOSA
 	tristate "Sharp SL-6000 LCD Driver"
-	depends on SPI && MACH_TOSA
+	depends on I2C && SPI && MACH_TOSA
 	help
 	  If you have an Sharp SL-6000 Zaurus say Y to enable a driver
 	  for its LCD.
diff --git a/drivers/video/backlight/ili9320.c b/drivers/video/backlight/ili9320.c
index 6c93993..9327cd1 100644
--- a/drivers/video/backlight/ili9320.c
+++ b/drivers/video/backlight/ili9320.c
@@ -263,7 +263,7 @@
 
 EXPORT_SYMBOL_GPL(ili9320_probe_spi);
 
-int __devexit ili9320_remove(struct ili9320 *ili)
+int ili9320_remove(struct ili9320 *ili)
 {
 	ili9320_power(ili, FB_BLANK_POWERDOWN);
 
diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/bfin_adv7393fb.c
index 33ea874..9bdd4b0 100644
--- a/drivers/video/bfin_adv7393fb.c
+++ b/drivers/video/bfin_adv7393fb.c
@@ -353,18 +353,16 @@
 
 static int
 adv7393_write_proc(struct file *file, const char __user * buffer,
-		   unsigned long count, void *data)
+		   size_t count, void *data)
 {
 	struct adv7393fb_device *fbdev = data;
-	char line[8];
 	unsigned int val;
 	int ret;
 
-	ret = copy_from_user(line, buffer, count);
+	ret = kstrtouint_from_user(buffer, count, 0, &val);
 	if (ret)
 		return -EFAULT;
 
-	val = simple_strtoul(line, NULL, 0);
 	adv7393_write(fbdev->client, val >> 8, val & 0xff);
 
 	return count;
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c
index 377dde3..c95b417 100644
--- a/drivers/video/broadsheetfb.c
+++ b/drivers/video/broadsheetfb.c
@@ -1211,7 +1211,7 @@
 
 static struct platform_driver broadsheetfb_driver = {
 	.probe	= broadsheetfb_probe,
-	.remove = broadsheetfb_remove,
+	.remove = __devexit_p(broadsheetfb_remove),
 	.driver	= {
 		.owner	= THIS_MODULE,
 		.name	= "broadsheetfb",
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index c2d11fe..e2c96d0 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -224,5 +224,19 @@
 	  big letters. It fits between the sun 12x22 and the normal 8x16 font.
 	  If other fonts are too big or too small for you, say Y, otherwise say N.
 
+config FONT_AUTOSELECT
+	def_bool y
+	depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE || STI_CONSOLE || USB_SISUSBVGA_CON
+	depends on !FONT_8x8
+	depends on !FONT_6x11
+	depends on !FONT_7x14
+	depends on !FONT_PEARL_8x8
+	depends on !FONT_ACORN_8x8
+	depends on !FONT_MINI_4x6
+	depends on !FONT_SUN8x16
+	depends on !FONT_SUN12x22
+	depends on !FONT_10x18
+	select FONT_8x16
+
 endmenu
 
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c
index ab0a8e5..85e4f44 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/mbx/mbxfb.c
@@ -1045,7 +1045,7 @@
 
 static struct platform_driver mbxfb_driver = {
 	.probe = mbxfb_probe,
-	.remove = mbxfb_remove,
+	.remove = __devexit_p(mbxfb_remove),
 	.suspend = mbxfb_suspend,
 	.resume = mbxfb_resume,
 	.driver = {
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 2ce9992..901576e 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -526,7 +526,7 @@
 {
 	struct omap_dss_device *dssdev = to_dss_device(dev);
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	u8 errors;
+	u8 errors = 0;
 	int r;
 
 	mutex_lock(&td->lock);
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 72ded9c..5066eee 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -194,8 +194,7 @@
 static inline void dss_uninitialize_debugfs(void)
 {
 }
-static inline int dss_debugfs_create_file(const char *name,
-		void (*write)(struct seq_file *))
+int dss_debugfs_create_file(const char *name, void (*write)(struct seq_file *))
 {
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index ec363d8..ca8382d 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -3724,7 +3724,7 @@
 	/* CLKIN4DDR = 16 * TXBYTECLKHS */
 	tlp_avail = thsbyte_clk * (blank - trans_lp);
 
-	ttxclkesc = tdsi_fclk / lp_clk_div;
+	ttxclkesc = tdsi_fclk * lp_clk_div;
 
 	lp_inter = ((tlp_avail - 8 * thsbyte_clk - 5 * tdsi_fclk) / ttxclkesc -
 			26) / 16;
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 6ea1ff1..7706323 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -731,7 +731,7 @@
 	DSSDBG("dss_runtime_put\n");
 
 	r = pm_runtime_put_sync(&dss.pdev->dev);
-	WARN_ON(r < 0);
+	WARN_ON(r < 0 && r != -EBUSY);
 }
 
 /* DEBUGFS */
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 5f9d8e690..ea7b661 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -361,7 +361,7 @@
 	result = (unsigned int)tmp / 1000;
 
 	dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
-		pixclk, clk, result, clk / result);
+		pixclk, clk, result, result ? clk / result : clk);
 
 	return result;
 }
@@ -1348,8 +1348,14 @@
 	writel(0, regs + VIDOSD_A(win, sfb->variant));
 	writel(0, regs + VIDOSD_B(win, sfb->variant));
 	writel(0, regs + VIDOSD_C(win, sfb->variant));
-	reg = readl(regs + SHADOWCON);
-	writel(reg & ~SHADOWCON_WINx_PROTECT(win), regs + SHADOWCON);
+
+	if (sfb->variant.has_shadowcon) {
+		reg = readl(sfb->regs + SHADOWCON);
+		reg &= ~(SHADOWCON_WINx_PROTECT(win) |
+			SHADOWCON_CHx_ENABLE(win) |
+			SHADOWCON_CHx_LOCAL_ENABLE(win));
+		writel(reg, sfb->regs + SHADOWCON);
+	}
 }
 
 static int __devinit s3c_fb_probe(struct platform_device *pdev)
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index cee7803..f3d3b9c 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -1351,7 +1351,7 @@
 	/* following part not present in X11 driver */
 	cr67 = vga_in8(0x3d5, par) & 0xf;
 	vga_out8(0x3d5, 0x50 | cr67, par);
-	udelay(10000);
+	mdelay(10);
 	vga_out8(0x3d4, 0x67, par);
 	/* end of part */
 	vga_out8(0x3d5, reg->CR67 & ~0x0c, par);
@@ -1904,11 +1904,11 @@
 	vga_out8(0x3d4, 0x66, par);
 	cr66 = vga_in8(0x3d5, par);
 	vga_out8(0x3d5, cr66 | 0x02, par);
-	udelay(10000);
+	mdelay(10);
 
 	vga_out8(0x3d4, 0x66, par);
 	vga_out8(0x3d5, cr66 & ~0x02, par);	/* clear reset flag */
-	udelay(10000);
+	mdelay(10);
 
 
 	/*
@@ -1918,11 +1918,11 @@
 	vga_out8(0x3d4, 0x3f, par);
 	cr3f = vga_in8(0x3d5, par);
 	vga_out8(0x3d5, cr3f | 0x08, par);
-	udelay(10000);
+	mdelay(10);
 
 	vga_out8(0x3d4, 0x3f, par);
 	vga_out8(0x3d5, cr3f & ~0x08, par);	/* clear reset flags */
-	udelay(10000);
+	mdelay(10);
 
 	/* Savage ramdac speeds */
 	par->numClocks = 4;
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 2b76381..1eff743 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -146,7 +146,7 @@
 }  __attribute__((packed));
 
 static unsigned int hpwdt_nmi_decoding;
-static unsigned int allow_kdump;
+static unsigned int allow_kdump = 1;
 static unsigned int is_icru;
 static DEFINE_SPINLOCK(rom_lock);
 static void *cru_rom_addr;
@@ -756,6 +756,8 @@
 static void hpwdt_exit_nmi_decoding(void)
 {
 	unregister_nmi_handler(NMI_UNKNOWN, "hpwdt");
+	unregister_nmi_handler(NMI_SERR, "hpwdt");
+	unregister_nmi_handler(NMI_IO_CHECK, "hpwdt");
 	if (cru_rom_addr)
 		iounmap(cru_rom_addr);
 }
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index bc47e90..9c2c27c 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -699,3 +699,4 @@
 MODULE_VERSION(DRV_VERSION);
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index afcd136..e4841c3 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -4,7 +4,7 @@
  * Watchdog driver for ARM SP805 watchdog module
  *
  * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2 or later. This program is licensed "as is" without any
@@ -331,6 +331,6 @@
 
 module_amba_driver(sp805_wdt_driver);
 
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
 MODULE_DESCRIPTION("ARM SP805 Watchdog Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index 672d169..ef8edec 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -349,7 +349,7 @@
 			sizeof(struct watchdog_info)) ? -EFAULT : 0;
 	case WDIOC_GETSTATUS:
 		err = watchdog_get_status(wdd, &val);
-		if (err)
+		if (err == -ENODEV)
 			return err;
 		return put_user(val, p);
 	case WDIOC_GETBOOTSTATUS:
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 6908e4c..7595581 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -827,6 +827,9 @@
 					      handle_edge_irq, "event");
 
 		xen_irq_info_evtchn_init(irq, evtchn);
+	} else {
+		struct irq_info *info = info_for_irq(irq);
+		WARN_ON(info == NULL || info->type != IRQT_EVTCHN);
 	}
 
 out:
@@ -862,6 +865,9 @@
 		xen_irq_info_ipi_init(cpu, irq, evtchn, ipi);
 
 		bind_evtchn_to_cpu(evtchn, cpu);
+	} else {
+		struct irq_info *info = info_for_irq(irq);
+		WARN_ON(info == NULL || info->type != IRQT_IPI);
 	}
 
  out:
@@ -939,6 +945,9 @@
 		xen_irq_info_virq_init(cpu, irq, evtchn, virq);
 
 		bind_evtchn_to_cpu(evtchn, cpu);
+	} else {
+		struct irq_info *info = info_for_irq(irq);
+		WARN_ON(info == NULL || info->type != IRQT_VIRQ);
 	}
 
 out:
diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c
index b84bf0b..18fff88 100644
--- a/drivers/xen/pci.c
+++ b/drivers/xen/pci.c
@@ -59,7 +59,7 @@
 
 #ifdef CONFIG_ACPI
 		handle = DEVICE_ACPI_HANDLE(&pci_dev->dev);
-		if (!handle)
+		if (!handle && pci_dev->bus->bridge)
 			handle = DEVICE_ACPI_HANDLE(pci_dev->bus->bridge);
 #ifdef CONFIG_PCI_IOV
 		if (!handle && pci_dev->is_virtfn)
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 3f75895..a383c18 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -179,60 +179,74 @@
 
 static int add_all_parents(struct btrfs_root *root, struct btrfs_path *path,
 				struct ulist *parents, int level,
-				struct btrfs_key *key, u64 wanted_disk_byte,
+				struct btrfs_key *key_for_search, u64 time_seq,
+				u64 wanted_disk_byte,
 				const u64 *extent_item_pos)
 {
-	int ret;
-	int slot = path->slots[level];
-	struct extent_buffer *eb = path->nodes[level];
+	int ret = 0;
+	int slot;
+	struct extent_buffer *eb;
+	struct btrfs_key key;
 	struct btrfs_file_extent_item *fi;
 	struct extent_inode_elem *eie = NULL;
 	u64 disk_byte;
-	u64 wanted_objectid = key->objectid;
 
-add_parent:
-	if (level == 0 && extent_item_pos) {
-		fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
-		ret = check_extent_in_eb(key, eb, fi, *extent_item_pos, &eie);
+	if (level != 0) {
+		eb = path->nodes[level];
+		ret = ulist_add(parents, eb->start, 0, GFP_NOFS);
 		if (ret < 0)
 			return ret;
-	}
-	ret = ulist_add(parents, eb->start, (unsigned long)eie, GFP_NOFS);
-	if (ret < 0)
-		return ret;
-
-	if (level != 0)
 		return 0;
+	}
 
 	/*
-	 * if the current leaf is full with EXTENT_DATA items, we must
-	 * check the next one if that holds a reference as well.
-	 * ref->count cannot be used to skip this check.
-	 * repeat this until we don't find any additional EXTENT_DATA items.
+	 * We normally enter this function with the path already pointing to
+	 * the first item to check. But sometimes, we may enter it with
+	 * slot==nritems. In that case, go to the next leaf before we continue.
 	 */
-	while (1) {
-		eie = NULL;
-		ret = btrfs_next_leaf(root, path);
-		if (ret < 0)
-			return ret;
-		if (ret)
-			return 0;
+	if (path->slots[0] >= btrfs_header_nritems(path->nodes[0]))
+		ret = btrfs_next_old_leaf(root, path, time_seq);
 
+	while (!ret) {
 		eb = path->nodes[0];
-		for (slot = 0; slot < btrfs_header_nritems(eb); ++slot) {
-			btrfs_item_key_to_cpu(eb, key, slot);
-			if (key->objectid != wanted_objectid ||
-			    key->type != BTRFS_EXTENT_DATA_KEY)
-				return 0;
-			fi = btrfs_item_ptr(eb, slot,
-						struct btrfs_file_extent_item);
-			disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
-			if (disk_byte == wanted_disk_byte)
-				goto add_parent;
+		slot = path->slots[0];
+
+		btrfs_item_key_to_cpu(eb, &key, slot);
+
+		if (key.objectid != key_for_search->objectid ||
+		    key.type != BTRFS_EXTENT_DATA_KEY)
+			break;
+
+		fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
+		disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
+
+		if (disk_byte == wanted_disk_byte) {
+			eie = NULL;
+			if (extent_item_pos) {
+				ret = check_extent_in_eb(&key, eb, fi,
+						*extent_item_pos,
+						&eie);
+				if (ret < 0)
+					break;
+			}
+			if (!ret) {
+				ret = ulist_add(parents, eb->start,
+						(unsigned long)eie, GFP_NOFS);
+				if (ret < 0)
+					break;
+				if (!extent_item_pos) {
+					ret = btrfs_next_old_leaf(root, path,
+							time_seq);
+					continue;
+				}
+			}
 		}
+		ret = btrfs_next_old_item(root, path, time_seq);
 	}
 
-	return 0;
+	if (ret > 0)
+		ret = 0;
+	return ret;
 }
 
 /*
@@ -249,7 +263,6 @@
 	struct btrfs_path *path;
 	struct btrfs_root *root;
 	struct btrfs_key root_key;
-	struct btrfs_key key = {0};
 	struct extent_buffer *eb;
 	int ret = 0;
 	int root_level;
@@ -288,25 +301,19 @@
 		goto out;
 
 	eb = path->nodes[level];
-	if (!eb) {
-		WARN_ON(1);
-		ret = 1;
-		goto out;
-	}
-
-	if (level == 0) {
-		if (ret == 1 && path->slots[0] >= btrfs_header_nritems(eb)) {
-			ret = btrfs_next_leaf(root, path);
-			if (ret)
-				goto out;
-			eb = path->nodes[0];
+	while (!eb) {
+		if (!level) {
+			WARN_ON(1);
+			ret = 1;
+			goto out;
 		}
-
-		btrfs_item_key_to_cpu(eb, &key, path->slots[0]);
+		level--;
+		eb = path->nodes[level];
 	}
 
-	ret = add_all_parents(root, path, parents, level, &key,
-				ref->wanted_disk_byte, extent_item_pos);
+	ret = add_all_parents(root, path, parents, level, &ref->key_for_search,
+				time_seq, ref->wanted_disk_byte,
+				extent_item_pos);
 out:
 	btrfs_free_path(path);
 	return ret;
@@ -832,6 +839,7 @@
 			}
 			ret = __add_delayed_refs(head, delayed_ref_seq,
 						 &prefs_delayed);
+			mutex_unlock(&head->mutex);
 			if (ret) {
 				spin_unlock(&delayed_refs->lock);
 				goto out;
@@ -925,8 +933,6 @@
 	}
 
 out:
-	if (head)
-		mutex_unlock(&head->mutex);
 	btrfs_free_path(path);
 	while (!list_empty(&prefs)) {
 		ref = list_first_entry(&prefs, struct __prelim_ref, list);
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index e616f887..12394a9 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -37,6 +37,7 @@
 #define BTRFS_INODE_IN_DEFRAG			3
 #define BTRFS_INODE_DELALLOC_META_RESERVED	4
 #define BTRFS_INODE_HAS_ORPHAN_ITEM		5
+#define BTRFS_INODE_HAS_ASYNC_EXTENT		6
 
 /* in memory btrfs inode */
 struct btrfs_inode {
diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c
index 9cebb1f..da6e936 100644
--- a/fs/btrfs/check-integrity.c
+++ b/fs/btrfs/check-integrity.c
@@ -93,6 +93,7 @@
 #include "print-tree.h"
 #include "locking.h"
 #include "check-integrity.h"
+#include "rcu-string.h"
 
 #define BTRFSIC_BLOCK_HASHTABLE_SIZE 0x10000
 #define BTRFSIC_BLOCK_LINK_HASHTABLE_SIZE 0x10000
@@ -843,13 +844,14 @@
 		superblock_tmp->never_written = 0;
 		superblock_tmp->mirror_num = 1 + superblock_mirror_num;
 		if (state->print_mask & BTRFSIC_PRINT_MASK_SUPERBLOCK_WRITE)
-			printk(KERN_INFO "New initial S-block (bdev %p, %s)"
-			       " @%llu (%s/%llu/%d)\n",
-			       superblock_bdev, device->name,
-			       (unsigned long long)dev_bytenr,
-			       dev_state->name,
-			       (unsigned long long)dev_bytenr,
-			       superblock_mirror_num);
+			printk_in_rcu(KERN_INFO "New initial S-block (bdev %p, %s)"
+				     " @%llu (%s/%llu/%d)\n",
+				     superblock_bdev,
+				     rcu_str_deref(device->name),
+				     (unsigned long long)dev_bytenr,
+				     dev_state->name,
+				     (unsigned long long)dev_bytenr,
+				     superblock_mirror_num);
 		list_add(&superblock_tmp->all_blocks_node,
 			 &state->all_blocks_list);
 		btrfsic_block_hashtable_add(superblock_tmp,
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index d7a96cf..8206b39 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -467,6 +467,15 @@
 	return 0;
 }
 
+/*
+ * This allocates memory and gets a tree modification sequence number when
+ * needed.
+ *
+ * Returns 0 when no sequence number is needed, < 0 on error.
+ * Returns 1 when a sequence number was added. In this case,
+ * fs_info->tree_mod_seq_lock was acquired and must be released by the caller
+ * after inserting into the rb tree.
+ */
 static inline int tree_mod_alloc(struct btrfs_fs_info *fs_info, gfp_t flags,
 				 struct tree_mod_elem **tm_ret)
 {
@@ -491,11 +500,11 @@
 		 */
 		kfree(tm);
 		seq = 0;
+		spin_unlock(&fs_info->tree_mod_seq_lock);
 	} else {
 		__get_tree_mod_seq(fs_info, &tm->elem);
 		seq = tm->elem.seq;
 	}
-	spin_unlock(&fs_info->tree_mod_seq_lock);
 
 	return seq;
 }
@@ -521,7 +530,9 @@
 	tm->slot = slot;
 	tm->generation = btrfs_node_ptr_generation(eb, slot);
 
-	return __tree_mod_log_insert(fs_info, tm);
+	ret = __tree_mod_log_insert(fs_info, tm);
+	spin_unlock(&fs_info->tree_mod_seq_lock);
+	return ret;
 }
 
 static noinline int
@@ -559,7 +570,9 @@
 	tm->move.nr_items = nr_items;
 	tm->op = MOD_LOG_MOVE_KEYS;
 
-	return __tree_mod_log_insert(fs_info, tm);
+	ret = __tree_mod_log_insert(fs_info, tm);
+	spin_unlock(&fs_info->tree_mod_seq_lock);
+	return ret;
 }
 
 static noinline int
@@ -580,7 +593,9 @@
 	tm->generation = btrfs_header_generation(old_root);
 	tm->op = MOD_LOG_ROOT_REPLACE;
 
-	return __tree_mod_log_insert(fs_info, tm);
+	ret = __tree_mod_log_insert(fs_info, tm);
+	spin_unlock(&fs_info->tree_mod_seq_lock);
+	return ret;
 }
 
 static struct tree_mod_elem *
@@ -1009,11 +1024,18 @@
 		if (!looped && !tm)
 			return 0;
 		/*
-		 * we must have key remove operations in the log before the
-		 * replace operation.
+		 * if there are no tree operation for the oldest root, we simply
+		 * return it. this should only happen if that (old) root is at
+		 * level 0.
 		 */
-		BUG_ON(!tm);
+		if (!tm)
+			break;
 
+		/*
+		 * if there's an operation that's not a root replacement, we
+		 * found the oldest version of our root. normally, we'll find a
+		 * MOD_LOG_KEY_REMOVE_WHILE_FREEING operation here.
+		 */
 		if (tm->op != MOD_LOG_ROOT_REPLACE)
 			break;
 
@@ -1023,6 +1045,10 @@
 		looped = 1;
 	}
 
+	/* if there's no old root to return, return what we found instead */
+	if (!found)
+		found = tm;
+
 	return found;
 }
 
@@ -1068,11 +1094,7 @@
 						      tm->generation);
 			break;
 		case MOD_LOG_KEY_ADD:
-			if (tm->slot != n - 1) {
-				o_dst = btrfs_node_key_ptr_offset(tm->slot);
-				o_src = btrfs_node_key_ptr_offset(tm->slot + 1);
-				memmove_extent_buffer(eb, o_dst, o_src, p_size);
-			}
+			/* if a move operation is needed it's in the log */
 			n--;
 			break;
 		case MOD_LOG_MOVE_KEYS:
@@ -1143,45 +1165,57 @@
 	return eb_rewin;
 }
 
+/*
+ * get_old_root() rewinds the state of @root's root node to the given @time_seq
+ * value. If there are no changes, the current root->root_node is returned. If
+ * anything changed in between, there's a fresh buffer allocated on which the
+ * rewind operations are done. In any case, the returned buffer is read locked.
+ * Returns NULL on error (with no locks held).
+ */
 static inline struct extent_buffer *
 get_old_root(struct btrfs_root *root, u64 time_seq)
 {
 	struct tree_mod_elem *tm;
 	struct extent_buffer *eb;
-	struct tree_mod_root *old_root;
-	u64 old_generation;
+	struct tree_mod_root *old_root = NULL;
+	u64 old_generation = 0;
+	u64 logical;
 
+	eb = btrfs_read_lock_root_node(root);
 	tm = __tree_mod_log_oldest_root(root->fs_info, root, time_seq);
 	if (!tm)
 		return root->node;
 
-	old_root = &tm->old_root;
-	old_generation = tm->generation;
-
-	tm = tree_mod_log_search(root->fs_info, old_root->logical, time_seq);
-	/*
-	 * there was an item in the log when __tree_mod_log_oldest_root
-	 * returned. this one must not go away, because the time_seq passed to
-	 * us must be blocking its removal.
-	 */
-	BUG_ON(!tm);
-
-	if (old_root->logical == root->node->start) {
-		/* there are logged operations for the current root */
-		eb = btrfs_clone_extent_buffer(root->node);
+	if (tm->op == MOD_LOG_ROOT_REPLACE) {
+		old_root = &tm->old_root;
+		old_generation = tm->generation;
+		logical = old_root->logical;
 	} else {
-		/* there's a root replace operation for the current root */
-		eb = alloc_dummy_extent_buffer(tm->index << PAGE_CACHE_SHIFT,
-					       root->nodesize);
+		logical = root->node->start;
+	}
+
+	tm = tree_mod_log_search(root->fs_info, logical, time_seq);
+	if (old_root)
+		eb = alloc_dummy_extent_buffer(logical, root->nodesize);
+	else
+		eb = btrfs_clone_extent_buffer(root->node);
+	btrfs_tree_read_unlock(root->node);
+	free_extent_buffer(root->node);
+	if (!eb)
+		return NULL;
+	btrfs_tree_read_lock(eb);
+	if (old_root) {
 		btrfs_set_header_bytenr(eb, eb->start);
 		btrfs_set_header_backref_rev(eb, BTRFS_MIXED_BACKREF_REV);
 		btrfs_set_header_owner(eb, root->root_key.objectid);
+		btrfs_set_header_level(eb, old_root->level);
+		btrfs_set_header_generation(eb, old_generation);
 	}
-	if (!eb)
-		return NULL;
-	btrfs_set_header_level(eb, old_root->level);
-	btrfs_set_header_generation(eb, old_generation);
-	__tree_mod_log_rewind(eb, time_seq, tm);
+	if (tm)
+		__tree_mod_log_rewind(eb, time_seq, tm);
+	else
+		WARN_ON(btrfs_header_level(eb) != 0);
+	extent_buffer_get(eb);
 
 	return eb;
 }
@@ -1650,8 +1684,6 @@
 	    BTRFS_NODEPTRS_PER_BLOCK(root) / 4)
 		return 0;
 
-	btrfs_header_nritems(mid);
-
 	left = read_node_slot(root, parent, pslot - 1);
 	if (left) {
 		btrfs_tree_lock(left);
@@ -1681,7 +1713,6 @@
 		wret = push_node_left(trans, root, left, mid, 1);
 		if (wret < 0)
 			ret = wret;
-		btrfs_header_nritems(mid);
 	}
 
 	/*
@@ -2615,9 +2646,7 @@
 
 again:
 	b = get_old_root(root, time_seq);
-	extent_buffer_get(b);
 	level = btrfs_header_level(b);
-	btrfs_tree_read_lock(b);
 	p->locks[level] = BTRFS_READ_LOCK;
 
 	while (b) {
@@ -2964,7 +2993,7 @@
 static void insert_ptr(struct btrfs_trans_handle *trans,
 		       struct btrfs_root *root, struct btrfs_path *path,
 		       struct btrfs_disk_key *key, u64 bytenr,
-		       int slot, int level, int tree_mod_log)
+		       int slot, int level)
 {
 	struct extent_buffer *lower;
 	int nritems;
@@ -2977,7 +3006,7 @@
 	BUG_ON(slot > nritems);
 	BUG_ON(nritems == BTRFS_NODEPTRS_PER_BLOCK(root));
 	if (slot != nritems) {
-		if (tree_mod_log && level)
+		if (level)
 			tree_mod_log_eb_move(root->fs_info, lower, slot + 1,
 					     slot, nritems - slot);
 		memmove_extent_buffer(lower,
@@ -2985,7 +3014,7 @@
 			      btrfs_node_key_ptr_offset(slot),
 			      (nritems - slot) * sizeof(struct btrfs_key_ptr));
 	}
-	if (tree_mod_log && level) {
+	if (level) {
 		ret = tree_mod_log_insert_key(root->fs_info, lower, slot,
 					      MOD_LOG_KEY_ADD);
 		BUG_ON(ret < 0);
@@ -3073,7 +3102,7 @@
 	btrfs_mark_buffer_dirty(split);
 
 	insert_ptr(trans, root, path, &disk_key, split->start,
-		   path->slots[level + 1] + 1, level + 1, 1);
+		   path->slots[level + 1] + 1, level + 1);
 
 	if (path->slots[level] >= mid) {
 		path->slots[level] -= mid;
@@ -3610,7 +3639,7 @@
 	btrfs_set_header_nritems(l, mid);
 	btrfs_item_key(right, &disk_key, 0);
 	insert_ptr(trans, root, path, &disk_key, right->start,
-		   path->slots[1] + 1, 1, 0);
+		   path->slots[1] + 1, 1);
 
 	btrfs_mark_buffer_dirty(right);
 	btrfs_mark_buffer_dirty(l);
@@ -3817,7 +3846,7 @@
 		if (mid <= slot) {
 			btrfs_set_header_nritems(right, 0);
 			insert_ptr(trans, root, path, &disk_key, right->start,
-				   path->slots[1] + 1, 1, 0);
+				   path->slots[1] + 1, 1);
 			btrfs_tree_unlock(path->nodes[0]);
 			free_extent_buffer(path->nodes[0]);
 			path->nodes[0] = right;
@@ -3826,7 +3855,7 @@
 		} else {
 			btrfs_set_header_nritems(right, 0);
 			insert_ptr(trans, root, path, &disk_key, right->start,
-					  path->slots[1], 1, 0);
+					  path->slots[1], 1);
 			btrfs_tree_unlock(path->nodes[0]);
 			free_extent_buffer(path->nodes[0]);
 			path->nodes[0] = right;
@@ -5001,6 +5030,12 @@
  */
 int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path)
 {
+	return btrfs_next_old_leaf(root, path, 0);
+}
+
+int btrfs_next_old_leaf(struct btrfs_root *root, struct btrfs_path *path,
+			u64 time_seq)
+{
 	int slot;
 	int level;
 	struct extent_buffer *c;
@@ -5025,7 +5060,10 @@
 	path->keep_locks = 1;
 	path->leave_spinning = 1;
 
-	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+	if (time_seq)
+		ret = btrfs_search_old_slot(root, &key, path, time_seq);
+	else
+		ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
 	path->keep_locks = 0;
 
 	if (ret < 0)
@@ -5081,6 +5119,18 @@
 
 		if (!path->skip_locking) {
 			ret = btrfs_try_tree_read_lock(next);
+			if (!ret && time_seq) {
+				/*
+				 * If we don't get the lock, we may be racing
+				 * with push_leaf_left, holding that lock while
+				 * itself waiting for the leaf we've currently
+				 * locked. To solve this situation, we give up
+				 * on our lock and cycle.
+				 */
+				btrfs_release_path(path);
+				cond_resched();
+				goto again;
+			}
 			if (!ret) {
 				btrfs_set_path_blocking(path);
 				btrfs_tree_read_lock(next);
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 0236d03..fa5c45b 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2753,13 +2753,20 @@
 }
 
 int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path);
-static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p)
+int btrfs_next_old_leaf(struct btrfs_root *root, struct btrfs_path *path,
+			u64 time_seq);
+static inline int btrfs_next_old_item(struct btrfs_root *root,
+				      struct btrfs_path *p, u64 time_seq)
 {
 	++p->slots[0];
 	if (p->slots[0] >= btrfs_header_nritems(p->nodes[0]))
-		return btrfs_next_leaf(root, p);
+		return btrfs_next_old_leaf(root, p, time_seq);
 	return 0;
 }
+static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p)
+{
+	return btrfs_next_old_item(root, p, 0);
+}
 int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path);
 int btrfs_leaf_free_space(struct btrfs_root *root, struct extent_buffer *leaf);
 int __must_check btrfs_drop_snapshot(struct btrfs_root *root,
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index c18d044..2399f40 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -1879,3 +1879,21 @@
 		}
 	}
 }
+
+void btrfs_destroy_delayed_inodes(struct btrfs_root *root)
+{
+	struct btrfs_delayed_root *delayed_root;
+	struct btrfs_delayed_node *curr_node, *prev_node;
+
+	delayed_root = btrfs_get_delayed_root(root);
+
+	curr_node = btrfs_first_delayed_node(delayed_root);
+	while (curr_node) {
+		__btrfs_kill_delayed_node(curr_node);
+
+		prev_node = curr_node;
+		curr_node = btrfs_next_delayed_node(curr_node);
+		btrfs_release_delayed_node(prev_node);
+	}
+}
+
diff --git a/fs/btrfs/delayed-inode.h b/fs/btrfs/delayed-inode.h
index 7083d08..f5aa402 100644
--- a/fs/btrfs/delayed-inode.h
+++ b/fs/btrfs/delayed-inode.h
@@ -124,6 +124,9 @@
 /* Used for drop dead root */
 void btrfs_kill_all_delayed_nodes(struct btrfs_root *root);
 
+/* Used for clean the transaction */
+void btrfs_destroy_delayed_inodes(struct btrfs_root *root);
+
 /* Used for readdir() */
 void btrfs_get_delayed_items(struct inode *inode, struct list_head *ins_list,
 			     struct list_head *del_list);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 7ae51de..2936ca4 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -44,6 +44,7 @@
 #include "free-space-cache.h"
 #include "inode-map.h"
 #include "check-integrity.h"
+#include "rcu-string.h"
 
 static struct extent_io_ops btree_extent_io_ops;
 static void end_workqueue_fn(struct btrfs_work *work);
@@ -2118,7 +2119,7 @@
 
 	features = btrfs_super_incompat_flags(disk_super);
 	features |= BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF;
-	if (tree_root->fs_info->compress_type & BTRFS_COMPRESS_LZO)
+	if (tree_root->fs_info->compress_type == BTRFS_COMPRESS_LZO)
 		features |= BTRFS_FEATURE_INCOMPAT_COMPRESS_LZO;
 
 	/*
@@ -2353,12 +2354,17 @@
 				  BTRFS_CSUM_TREE_OBJECTID, csum_root);
 	if (ret)
 		goto recovery_tree_root;
-
 	csum_root->track_dirty = 1;
 
 	fs_info->generation = generation;
 	fs_info->last_trans_committed = generation;
 
+	ret = btrfs_recover_balance(fs_info);
+	if (ret) {
+		printk(KERN_WARNING "btrfs: failed to recover balance\n");
+		goto fail_block_groups;
+	}
+
 	ret = btrfs_init_dev_stats(fs_info);
 	if (ret) {
 		printk(KERN_ERR "btrfs: failed to init dev_stats: %d\n",
@@ -2484,20 +2490,23 @@
 		goto fail_trans_kthread;
 	}
 
-	if (!(sb->s_flags & MS_RDONLY)) {
-		down_read(&fs_info->cleanup_work_sem);
-		err = btrfs_orphan_cleanup(fs_info->fs_root);
-		if (!err)
-			err = btrfs_orphan_cleanup(fs_info->tree_root);
+	if (sb->s_flags & MS_RDONLY)
+		return 0;
+
+	down_read(&fs_info->cleanup_work_sem);
+	if ((ret = btrfs_orphan_cleanup(fs_info->fs_root)) ||
+	    (ret = btrfs_orphan_cleanup(fs_info->tree_root))) {
 		up_read(&fs_info->cleanup_work_sem);
+		close_ctree(tree_root);
+		return ret;
+	}
+	up_read(&fs_info->cleanup_work_sem);
 
-		if (!err)
-			err = btrfs_recover_balance(fs_info->tree_root);
-
-		if (err) {
-			close_ctree(tree_root);
-			return err;
-		}
+	ret = btrfs_resume_balance_async(fs_info);
+	if (ret) {
+		printk(KERN_WARNING "btrfs: failed to resume balance\n");
+		close_ctree(tree_root);
+		return ret;
 	}
 
 	return 0;
@@ -2575,8 +2584,9 @@
 		struct btrfs_device *device = (struct btrfs_device *)
 			bh->b_private;
 
-		printk_ratelimited(KERN_WARNING "lost page write due to "
-				   "I/O error on %s\n", device->name);
+		printk_ratelimited_in_rcu(KERN_WARNING "lost page write due to "
+					  "I/O error on %s\n",
+					  rcu_str_deref(device->name));
 		/* note, we dont' set_buffer_write_io_error because we have
 		 * our own ways of dealing with the IO errors
 		 */
@@ -2749,8 +2759,8 @@
 		wait_for_completion(&device->flush_wait);
 
 		if (bio_flagged(bio, BIO_EOPNOTSUPP)) {
-			printk("btrfs: disabling barriers on dev %s\n",
-			       device->name);
+			printk_in_rcu("btrfs: disabling barriers on dev %s\n",
+				      rcu_str_deref(device->name));
 			device->nobarriers = 1;
 		}
 		if (!bio_flagged(bio, BIO_UPTODATE)) {
@@ -3400,7 +3410,6 @@
 
 	delayed_refs = &trans->delayed_refs;
 
-again:
 	spin_lock(&delayed_refs->lock);
 	if (delayed_refs->num_entries == 0) {
 		spin_unlock(&delayed_refs->lock);
@@ -3408,31 +3417,37 @@
 		return ret;
 	}
 
-	node = rb_first(&delayed_refs->root);
-	while (node) {
+	while ((node = rb_first(&delayed_refs->root)) != NULL) {
 		ref = rb_entry(node, struct btrfs_delayed_ref_node, rb_node);
-		node = rb_next(node);
-
-		ref->in_tree = 0;
-		rb_erase(&ref->rb_node, &delayed_refs->root);
-		delayed_refs->num_entries--;
 
 		atomic_set(&ref->refs, 1);
 		if (btrfs_delayed_ref_is_head(ref)) {
 			struct btrfs_delayed_ref_head *head;
 
 			head = btrfs_delayed_node_to_head(ref);
-			spin_unlock(&delayed_refs->lock);
-			mutex_lock(&head->mutex);
+			if (!mutex_trylock(&head->mutex)) {
+				atomic_inc(&ref->refs);
+				spin_unlock(&delayed_refs->lock);
+
+				/* Need to wait for the delayed ref to run */
+				mutex_lock(&head->mutex);
+				mutex_unlock(&head->mutex);
+				btrfs_put_delayed_ref(ref);
+
+				spin_lock(&delayed_refs->lock);
+				continue;
+			}
+
 			kfree(head->extent_op);
 			delayed_refs->num_heads--;
 			if (list_empty(&head->cluster))
 				delayed_refs->num_heads_ready--;
 			list_del_init(&head->cluster);
-			mutex_unlock(&head->mutex);
-			btrfs_put_delayed_ref(ref);
-			goto again;
 		}
+		ref->in_tree = 0;
+		rb_erase(&ref->rb_node, &delayed_refs->root);
+		delayed_refs->num_entries--;
+
 		spin_unlock(&delayed_refs->lock);
 		btrfs_put_delayed_ref(ref);
 
@@ -3520,11 +3535,9 @@
 			     &(&BTRFS_I(page->mapping->host)->io_tree)->buffer,
 					       offset >> PAGE_CACHE_SHIFT);
 			spin_unlock(&dirty_pages->buffer_lock);
-			if (eb) {
+			if (eb)
 				ret = test_and_clear_bit(EXTENT_BUFFER_DIRTY,
 							 &eb->bflags);
-				atomic_set(&eb->refs, 1);
-			}
 			if (PageWriteback(page))
 				end_page_writeback(page);
 
@@ -3538,8 +3551,8 @@
 				spin_unlock_irq(&page->mapping->tree_lock);
 			}
 
-			page->mapping->a_ops->invalidatepage(page, 0);
 			unlock_page(page);
+			page_cache_release(page);
 		}
 	}
 
@@ -3553,8 +3566,10 @@
 	u64 start;
 	u64 end;
 	int ret;
+	bool loop = true;
 
 	unpin = pinned_extents;
+again:
 	while (1) {
 		ret = find_first_extent_bit(unpin, 0, &start, &end,
 					    EXTENT_DIRTY);
@@ -3572,6 +3587,15 @@
 		cond_resched();
 	}
 
+	if (loop) {
+		if (unpin == &root->fs_info->freed_extents[0])
+			unpin = &root->fs_info->freed_extents[1];
+		else
+			unpin = &root->fs_info->freed_extents[0];
+		loop = false;
+		goto again;
+	}
+
 	return 0;
 }
 
@@ -3585,21 +3609,23 @@
 	/* FIXME: cleanup wait for commit */
 	cur_trans->in_commit = 1;
 	cur_trans->blocked = 1;
-	if (waitqueue_active(&root->fs_info->transaction_blocked_wait))
-		wake_up(&root->fs_info->transaction_blocked_wait);
+	wake_up(&root->fs_info->transaction_blocked_wait);
 
 	cur_trans->blocked = 0;
-	if (waitqueue_active(&root->fs_info->transaction_wait))
-		wake_up(&root->fs_info->transaction_wait);
+	wake_up(&root->fs_info->transaction_wait);
 
 	cur_trans->commit_done = 1;
-	if (waitqueue_active(&cur_trans->commit_wait))
-		wake_up(&cur_trans->commit_wait);
+	wake_up(&cur_trans->commit_wait);
+
+	btrfs_destroy_delayed_inodes(root);
+	btrfs_assert_delayed_root_empty(root);
 
 	btrfs_destroy_pending_snapshots(cur_trans);
 
 	btrfs_destroy_marked_extents(root, &cur_trans->dirty_pages,
 				     EXTENT_DIRTY);
+	btrfs_destroy_pinned_extent(root,
+				    root->fs_info->pinned_extents);
 
 	/*
 	memset(cur_trans, 0, sizeof(*cur_trans));
@@ -3648,6 +3674,9 @@
 		if (waitqueue_active(&t->commit_wait))
 			wake_up(&t->commit_wait);
 
+		btrfs_destroy_delayed_inodes(root);
+		btrfs_assert_delayed_root_empty(root);
+
 		btrfs_destroy_pending_snapshots(t);
 
 		btrfs_destroy_delalloc_inodes(root);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 4b5a1e1..6e1d367 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -2347,12 +2347,10 @@
 	return count;
 }
 
-
 static void wait_for_more_refs(struct btrfs_delayed_ref_root *delayed_refs,
-			unsigned long num_refs)
+			       unsigned long num_refs,
+			       struct list_head *first_seq)
 {
-	struct list_head *first_seq = delayed_refs->seq_head.next;
-
 	spin_unlock(&delayed_refs->lock);
 	pr_debug("waiting for more refs (num %ld, first %p)\n",
 		 num_refs, first_seq);
@@ -2381,6 +2379,7 @@
 	struct btrfs_delayed_ref_root *delayed_refs;
 	struct btrfs_delayed_ref_node *ref;
 	struct list_head cluster;
+	struct list_head *first_seq = NULL;
 	int ret;
 	u64 delayed_start;
 	int run_all = count == (unsigned long)-1;
@@ -2436,8 +2435,10 @@
 				 */
 				consider_waiting = 1;
 				num_refs = delayed_refs->num_entries;
+				first_seq = root->fs_info->tree_mod_seq_list.next;
 			} else {
-				wait_for_more_refs(delayed_refs, num_refs);
+				wait_for_more_refs(delayed_refs,
+						   num_refs, first_seq);
 				/*
 				 * after waiting, things have changed. we
 				 * dropped the lock and someone else might have
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 2c8f7b2..01c21b6 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -20,6 +20,7 @@
 #include "volumes.h"
 #include "check-integrity.h"
 #include "locking.h"
+#include "rcu-string.h"
 
 static struct kmem_cache *extent_state_cache;
 static struct kmem_cache *extent_buffer_cache;
@@ -1917,9 +1918,9 @@
 		return -EIO;
 	}
 
-	printk(KERN_INFO "btrfs read error corrected: ino %lu off %llu (dev %s "
-			"sector %llu)\n", page->mapping->host->i_ino, start,
-			dev->name, sector);
+	printk_in_rcu(KERN_INFO "btrfs read error corrected: ino %lu off %llu "
+		      "(dev %s sector %llu)\n", page->mapping->host->i_ino,
+		      start, rcu_str_deref(dev->name), sector);
 
 	bio_put(bio);
 	return 0;
@@ -3323,6 +3324,7 @@
 			     writepage_t writepage, void *data,
 			     void (*flush_fn)(void *))
 {
+	struct inode *inode = mapping->host;
 	int ret = 0;
 	int done = 0;
 	int nr_to_write_done = 0;
@@ -3333,6 +3335,18 @@
 	int scanned = 0;
 	int tag;
 
+	/*
+	 * We have to hold onto the inode so that ordered extents can do their
+	 * work when the IO finishes.  The alternative to this is failing to add
+	 * an ordered extent if the igrab() fails there and that is a huge pain
+	 * to deal with, so instead just hold onto the inode throughout the
+	 * writepages operation.  If it fails here we are freeing up the inode
+	 * anyway and we'd rather not waste our time writing out stuff that is
+	 * going to be truncated anyway.
+	 */
+	if (!igrab(inode))
+		return 0;
+
 	pagevec_init(&pvec, 0);
 	if (wbc->range_cyclic) {
 		index = mapping->writeback_index; /* Start from prev offset */
@@ -3427,6 +3441,7 @@
 		index = 0;
 		goto retry;
 	}
+	btrfs_add_delayed_iput(inode);
 	return ret;
 }
 
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 70dc8ca..9aa01ec 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1334,7 +1334,6 @@
 				    loff_t *ppos, size_t count, size_t ocount)
 {
 	struct file *file = iocb->ki_filp;
-	struct inode *inode = fdentry(file)->d_inode;
 	struct iov_iter i;
 	ssize_t written;
 	ssize_t written_buffered;
@@ -1344,18 +1343,6 @@
 	written = generic_file_direct_write(iocb, iov, &nr_segs, pos, ppos,
 					    count, ocount);
 
-	/*
-	 * the generic O_DIRECT will update in-memory i_size after the
-	 * DIOs are done.  But our endio handlers that update the on
-	 * disk i_size never update past the in memory i_size.  So we
-	 * need one more update here to catch any additions to the
-	 * file
-	 */
-	if (inode->i_size != BTRFS_I(inode)->disk_i_size) {
-		btrfs_ordered_update_i_size(inode, inode->i_size, NULL);
-		mark_inode_dirty(inode);
-	}
-
 	if (written < 0 || written == count)
 		return written;
 
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 81296c5..6c4e2ba 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -1543,29 +1543,26 @@
 	end = bitmap_info->offset + (u64)(BITS_PER_BITMAP * ctl->unit) - 1;
 
 	/*
-	 * XXX - this can go away after a few releases.
-	 *
-	 * since the only user of btrfs_remove_free_space is the tree logging
-	 * stuff, and the only way to test that is under crash conditions, we
-	 * want to have this debug stuff here just in case somethings not
-	 * working.  Search the bitmap for the space we are trying to use to
-	 * make sure its actually there.  If its not there then we need to stop
-	 * because something has gone wrong.
+	 * We need to search for bits in this bitmap.  We could only cover some
+	 * of the extent in this bitmap thanks to how we add space, so we need
+	 * to search for as much as it as we can and clear that amount, and then
+	 * go searching for the next bit.
 	 */
 	search_start = *offset;
-	search_bytes = *bytes;
+	search_bytes = ctl->unit;
 	search_bytes = min(search_bytes, end - search_start + 1);
 	ret = search_bitmap(ctl, bitmap_info, &search_start, &search_bytes);
 	BUG_ON(ret < 0 || search_start != *offset);
 
-	if (*offset > bitmap_info->offset && *offset + *bytes > end) {
-		bitmap_clear_bits(ctl, bitmap_info, *offset, end - *offset + 1);
-		*bytes -= end - *offset + 1;
-		*offset = end + 1;
-	} else if (*offset >= bitmap_info->offset && *offset + *bytes <= end) {
-		bitmap_clear_bits(ctl, bitmap_info, *offset, *bytes);
-		*bytes = 0;
-	}
+	/* We may have found more bits than what we need */
+	search_bytes = min(search_bytes, *bytes);
+
+	/* Cannot clear past the end of the bitmap */
+	search_bytes = min(search_bytes, end - search_start + 1);
+
+	bitmap_clear_bits(ctl, bitmap_info, search_start, search_bytes);
+	*offset += search_bytes;
+	*bytes -= search_bytes;
 
 	if (*bytes) {
 		struct rb_node *next = rb_next(&bitmap_info->offset_index);
@@ -1596,7 +1593,7 @@
 		 * everything over again.
 		 */
 		search_start = *offset;
-		search_bytes = *bytes;
+		search_bytes = ctl->unit;
 		ret = search_bitmap(ctl, bitmap_info, &search_start,
 				    &search_bytes);
 		if (ret < 0 || search_start != *offset)
@@ -1879,12 +1876,14 @@
 {
 	struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
 	struct btrfs_free_space *info;
-	struct btrfs_free_space *next_info = NULL;
 	int ret = 0;
 
 	spin_lock(&ctl->tree_lock);
 
 again:
+	if (!bytes)
+		goto out_lock;
+
 	info = tree_search_offset(ctl, offset, 0, 0);
 	if (!info) {
 		/*
@@ -1905,88 +1904,48 @@
 		}
 	}
 
-	if (info->bytes < bytes && rb_next(&info->offset_index)) {
-		u64 end;
-		next_info = rb_entry(rb_next(&info->offset_index),
-					     struct btrfs_free_space,
-					     offset_index);
-
-		if (next_info->bitmap)
-			end = next_info->offset +
-			      BITS_PER_BITMAP * ctl->unit - 1;
-		else
-			end = next_info->offset + next_info->bytes;
-
-		if (next_info->bytes < bytes ||
-		    next_info->offset > offset || offset > end) {
-			printk(KERN_CRIT "Found free space at %llu, size %llu,"
-			      " trying to use %llu\n",
-			      (unsigned long long)info->offset,
-			      (unsigned long long)info->bytes,
-			      (unsigned long long)bytes);
-			WARN_ON(1);
-			ret = -EINVAL;
-			goto out_lock;
-		}
-
-		info = next_info;
-	}
-
-	if (info->bytes == bytes) {
+	if (!info->bitmap) {
 		unlink_free_space(ctl, info);
-		if (info->bitmap) {
-			kfree(info->bitmap);
-			ctl->total_bitmaps--;
-		}
-		kmem_cache_free(btrfs_free_space_cachep, info);
-		ret = 0;
-		goto out_lock;
-	}
+		if (offset == info->offset) {
+			u64 to_free = min(bytes, info->bytes);
 
-	if (!info->bitmap && info->offset == offset) {
-		unlink_free_space(ctl, info);
-		info->offset += bytes;
-		info->bytes -= bytes;
-		ret = link_free_space(ctl, info);
-		WARN_ON(ret);
-		goto out_lock;
-	}
+			info->bytes -= to_free;
+			info->offset += to_free;
+			if (info->bytes) {
+				ret = link_free_space(ctl, info);
+				WARN_ON(ret);
+			} else {
+				kmem_cache_free(btrfs_free_space_cachep, info);
+			}
 
-	if (!info->bitmap && info->offset <= offset &&
-	    info->offset + info->bytes >= offset + bytes) {
-		u64 old_start = info->offset;
-		/*
-		 * we're freeing space in the middle of the info,
-		 * this can happen during tree log replay
-		 *
-		 * first unlink the old info and then
-		 * insert it again after the hole we're creating
-		 */
-		unlink_free_space(ctl, info);
-		if (offset + bytes < info->offset + info->bytes) {
-			u64 old_end = info->offset + info->bytes;
+			offset += to_free;
+			bytes -= to_free;
+			goto again;
+		} else {
+			u64 old_end = info->bytes + info->offset;
 
-			info->offset = offset + bytes;
-			info->bytes = old_end - info->offset;
+			info->bytes = offset - info->offset;
 			ret = link_free_space(ctl, info);
 			WARN_ON(ret);
 			if (ret)
 				goto out_lock;
-		} else {
-			/* the hole we're creating ends at the end
-			 * of the info struct, just free the info
-			 */
-			kmem_cache_free(btrfs_free_space_cachep, info);
-		}
-		spin_unlock(&ctl->tree_lock);
 
-		/* step two, insert a new info struct to cover
-		 * anything before the hole
-		 */
-		ret = btrfs_add_free_space(block_group, old_start,
-					   offset - old_start);
-		WARN_ON(ret); /* -ENOMEM */
-		goto out;
+			/* Not enough bytes in this entry to satisfy us */
+			if (old_end < offset + bytes) {
+				bytes -= old_end - offset;
+				offset = old_end;
+				goto again;
+			} else if (old_end == offset + bytes) {
+				/* all done */
+				goto out_lock;
+			}
+			spin_unlock(&ctl->tree_lock);
+
+			ret = btrfs_add_free_space(block_group, offset + bytes,
+						   old_end - (offset + bytes));
+			WARN_ON(ret);
+			goto out;
+		}
 	}
 
 	ret = remove_from_bitmap(ctl, info, &offset, &bytes);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index f6ab6f5..a7d1921 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -830,7 +830,7 @@
 	if (IS_ERR(trans)) {
 		extent_clear_unlock_delalloc(inode,
 			     &BTRFS_I(inode)->io_tree,
-			     start, end, NULL,
+			     start, end, locked_page,
 			     EXTENT_CLEAR_UNLOCK_PAGE |
 			     EXTENT_CLEAR_UNLOCK |
 			     EXTENT_CLEAR_DELALLOC |
@@ -963,7 +963,7 @@
 out_unlock:
 	extent_clear_unlock_delalloc(inode,
 		     &BTRFS_I(inode)->io_tree,
-		     start, end, NULL,
+		     start, end, locked_page,
 		     EXTENT_CLEAR_UNLOCK_PAGE |
 		     EXTENT_CLEAR_UNLOCK |
 		     EXTENT_CLEAR_DELALLOC |
@@ -986,8 +986,10 @@
 	compress_file_range(async_cow->inode, async_cow->locked_page,
 			    async_cow->start, async_cow->end, async_cow,
 			    &num_added);
-	if (num_added == 0)
+	if (num_added == 0) {
+		btrfs_add_delayed_iput(async_cow->inode);
 		async_cow->inode = NULL;
+	}
 }
 
 /*
@@ -1020,6 +1022,8 @@
 {
 	struct async_cow *async_cow;
 	async_cow = container_of(work, struct async_cow, work);
+	if (async_cow->inode)
+		btrfs_add_delayed_iput(async_cow->inode);
 	kfree(async_cow);
 }
 
@@ -1038,7 +1042,7 @@
 	while (start < end) {
 		async_cow = kmalloc(sizeof(*async_cow), GFP_NOFS);
 		BUG_ON(!async_cow); /* -ENOMEM */
-		async_cow->inode = inode;
+		async_cow->inode = igrab(inode);
 		async_cow->root = root;
 		async_cow->locked_page = locked_page;
 		async_cow->start = start;
@@ -1136,8 +1140,18 @@
 	u64 ino = btrfs_ino(inode);
 
 	path = btrfs_alloc_path();
-	if (!path)
+	if (!path) {
+		extent_clear_unlock_delalloc(inode,
+			     &BTRFS_I(inode)->io_tree,
+			     start, end, locked_page,
+			     EXTENT_CLEAR_UNLOCK_PAGE |
+			     EXTENT_CLEAR_UNLOCK |
+			     EXTENT_CLEAR_DELALLOC |
+			     EXTENT_CLEAR_DIRTY |
+			     EXTENT_SET_WRITEBACK |
+			     EXTENT_END_WRITEBACK);
 		return -ENOMEM;
+	}
 
 	nolock = btrfs_is_free_space_inode(root, inode);
 
@@ -1147,6 +1161,15 @@
 		trans = btrfs_join_transaction(root);
 
 	if (IS_ERR(trans)) {
+		extent_clear_unlock_delalloc(inode,
+			     &BTRFS_I(inode)->io_tree,
+			     start, end, locked_page,
+			     EXTENT_CLEAR_UNLOCK_PAGE |
+			     EXTENT_CLEAR_UNLOCK |
+			     EXTENT_CLEAR_DELALLOC |
+			     EXTENT_CLEAR_DIRTY |
+			     EXTENT_SET_WRITEBACK |
+			     EXTENT_END_WRITEBACK);
 		btrfs_free_path(path);
 		return PTR_ERR(trans);
 	}
@@ -1327,8 +1350,11 @@
 	}
 	btrfs_release_path(path);
 
-	if (cur_offset <= end && cow_start == (u64)-1)
+	if (cur_offset <= end && cow_start == (u64)-1) {
 		cow_start = cur_offset;
+		cur_offset = end;
+	}
+
 	if (cow_start != (u64)-1) {
 		ret = cow_file_range(inode, locked_page, cow_start, end,
 				     page_started, nr_written, 1);
@@ -1347,6 +1373,17 @@
 	if (!ret)
 		ret = err;
 
+	if (ret && cur_offset < end)
+		extent_clear_unlock_delalloc(inode,
+			     &BTRFS_I(inode)->io_tree,
+			     cur_offset, end, locked_page,
+			     EXTENT_CLEAR_UNLOCK_PAGE |
+			     EXTENT_CLEAR_UNLOCK |
+			     EXTENT_CLEAR_DELALLOC |
+			     EXTENT_CLEAR_DIRTY |
+			     EXTENT_SET_WRITEBACK |
+			     EXTENT_END_WRITEBACK);
+
 	btrfs_free_path(path);
 	return ret;
 }
@@ -1361,20 +1398,23 @@
 	int ret;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 
-	if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATACOW)
+	if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATACOW) {
 		ret = run_delalloc_nocow(inode, locked_page, start, end,
 					 page_started, 1, nr_written);
-	else if (BTRFS_I(inode)->flags & BTRFS_INODE_PREALLOC)
+	} else if (BTRFS_I(inode)->flags & BTRFS_INODE_PREALLOC) {
 		ret = run_delalloc_nocow(inode, locked_page, start, end,
 					 page_started, 0, nr_written);
-	else if (!btrfs_test_opt(root, COMPRESS) &&
-		 !(BTRFS_I(inode)->force_compress) &&
-		 !(BTRFS_I(inode)->flags & BTRFS_INODE_COMPRESS))
+	} else if (!btrfs_test_opt(root, COMPRESS) &&
+		   !(BTRFS_I(inode)->force_compress) &&
+		   !(BTRFS_I(inode)->flags & BTRFS_INODE_COMPRESS)) {
 		ret = cow_file_range(inode, locked_page, start, end,
 				      page_started, nr_written, 1);
-	else
+	} else {
+		set_bit(BTRFS_INODE_HAS_ASYNC_EXTENT,
+			&BTRFS_I(inode)->runtime_flags);
 		ret = cow_file_range_async(inode, locked_page, start, end,
 					   page_started, nr_written);
+	}
 	return ret;
 }
 
@@ -3714,7 +3754,7 @@
 	btrfs_wait_ordered_range(inode, 0, (u64)-1);
 
 	if (root->fs_info->log_root_recovering) {
-		BUG_ON(!test_bit(BTRFS_INODE_HAS_ORPHAN_ITEM,
+		BUG_ON(test_bit(BTRFS_INODE_HAS_ORPHAN_ITEM,
 				 &BTRFS_I(inode)->runtime_flags));
 		goto no_delete;
 	}
@@ -5836,8 +5876,17 @@
 	bh_result->b_size = len;
 	bh_result->b_bdev = em->bdev;
 	set_buffer_mapped(bh_result);
-	if (create && !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
-		set_buffer_new(bh_result);
+	if (create) {
+		if (!test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
+			set_buffer_new(bh_result);
+
+		/*
+		 * Need to update the i_size under the extent lock so buffered
+		 * readers will get the updated i_size when we unlock.
+		 */
+		if (start + len > i_size_read(inode))
+			i_size_write(inode, start + len);
+	}
 
 	free_extent_map(em);
 
@@ -6320,12 +6369,48 @@
 		 */
 		ordered = btrfs_lookup_ordered_range(inode, lockstart,
 						     lockend - lockstart + 1);
-		if (!ordered)
+
+		/*
+		 * We need to make sure there are no buffered pages in this
+		 * range either, we could have raced between the invalidate in
+		 * generic_file_direct_write and locking the extent.  The
+		 * invalidate needs to happen so that reads after a write do not
+		 * get stale data.
+		 */
+		if (!ordered && (!writing ||
+		    !test_range_bit(&BTRFS_I(inode)->io_tree,
+				    lockstart, lockend, EXTENT_UPTODATE, 0,
+				    cached_state)))
 			break;
+
 		unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart, lockend,
 				     &cached_state, GFP_NOFS);
-		btrfs_start_ordered_extent(inode, ordered, 1);
-		btrfs_put_ordered_extent(ordered);
+
+		if (ordered) {
+			btrfs_start_ordered_extent(inode, ordered, 1);
+			btrfs_put_ordered_extent(ordered);
+		} else {
+			/* Screw you mmap */
+			ret = filemap_write_and_wait_range(file->f_mapping,
+							   lockstart,
+							   lockend);
+			if (ret)
+				goto out;
+
+			/*
+			 * If we found a page that couldn't be invalidated just
+			 * fall back to buffered.
+			 */
+			ret = invalidate_inode_pages2_range(file->f_mapping,
+					lockstart >> PAGE_CACHE_SHIFT,
+					lockend >> PAGE_CACHE_SHIFT);
+			if (ret) {
+				if (ret == -EBUSY)
+					ret = 0;
+				goto out;
+			}
+		}
+
 		cond_resched();
 	}
 
@@ -7054,10 +7139,13 @@
 	else
 		b_inode->flags &= ~BTRFS_INODE_NODATACOW;
 
-	if (b_dir->flags & BTRFS_INODE_COMPRESS)
+	if (b_dir->flags & BTRFS_INODE_COMPRESS) {
 		b_inode->flags |= BTRFS_INODE_COMPRESS;
-	else
-		b_inode->flags &= ~BTRFS_INODE_COMPRESS;
+		b_inode->flags &= ~BTRFS_INODE_NOCOMPRESS;
+	} else {
+		b_inode->flags &= ~(BTRFS_INODE_COMPRESS |
+				    BTRFS_INODE_NOCOMPRESS);
+	}
 }
 
 static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 24b776c..0e92e57 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -52,6 +52,7 @@
 #include "locking.h"
 #include "inode-map.h"
 #include "backref.h"
+#include "rcu-string.h"
 
 /* Mask out flags that are inappropriate for the given type of inode. */
 static inline __u32 btrfs_mask_flags(umode_t mode, __u32 flags)
@@ -785,48 +786,12 @@
 	return -ENOENT;
 }
 
-/*
- * Validaty check of prev em and next em:
- * 1) no prev/next em
- * 2) prev/next em is an hole/inline extent
- */
-static int check_adjacent_extents(struct inode *inode, struct extent_map *em)
+static struct extent_map *defrag_lookup_extent(struct inode *inode, u64 start)
 {
 	struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
-	struct extent_map *prev = NULL, *next = NULL;
-	int ret = 0;
-
-	read_lock(&em_tree->lock);
-	prev = lookup_extent_mapping(em_tree, em->start - 1, (u64)-1);
-	next = lookup_extent_mapping(em_tree, em->start + em->len, (u64)-1);
-	read_unlock(&em_tree->lock);
-
-	if ((!prev || prev->block_start >= EXTENT_MAP_LAST_BYTE) &&
-	    (!next || next->block_start >= EXTENT_MAP_LAST_BYTE))
-		ret = 1;
-	free_extent_map(prev);
-	free_extent_map(next);
-
-	return ret;
-}
-
-static int should_defrag_range(struct inode *inode, u64 start, u64 len,
-			       int thresh, u64 *last_len, u64 *skip,
-			       u64 *defrag_end)
-{
 	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
-	struct extent_map *em = NULL;
-	struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
-	int ret = 1;
-
-	/*
-	 * make sure that once we start defragging an extent, we keep on
-	 * defragging it
-	 */
-	if (start < *defrag_end)
-		return 1;
-
-	*skip = 0;
+	struct extent_map *em;
+	u64 len = PAGE_CACHE_SIZE;
 
 	/*
 	 * hopefully we have this extent in the tree already, try without
@@ -843,27 +808,64 @@
 		unlock_extent(io_tree, start, start + len - 1);
 
 		if (IS_ERR(em))
-			return 0;
+			return NULL;
 	}
 
+	return em;
+}
+
+static bool defrag_check_next_extent(struct inode *inode, struct extent_map *em)
+{
+	struct extent_map *next;
+	bool ret = true;
+
+	/* this is the last extent */
+	if (em->start + em->len >= i_size_read(inode))
+		return false;
+
+	next = defrag_lookup_extent(inode, em->start + em->len);
+	if (!next || next->block_start >= EXTENT_MAP_LAST_BYTE)
+		ret = false;
+
+	free_extent_map(next);
+	return ret;
+}
+
+static int should_defrag_range(struct inode *inode, u64 start, int thresh,
+			       u64 *last_len, u64 *skip, u64 *defrag_end)
+{
+	struct extent_map *em;
+	int ret = 1;
+	bool next_mergeable = true;
+
+	/*
+	 * make sure that once we start defragging an extent, we keep on
+	 * defragging it
+	 */
+	if (start < *defrag_end)
+		return 1;
+
+	*skip = 0;
+
+	em = defrag_lookup_extent(inode, start);
+	if (!em)
+		return 0;
+
 	/* this will cover holes, and inline extents */
 	if (em->block_start >= EXTENT_MAP_LAST_BYTE) {
 		ret = 0;
 		goto out;
 	}
 
-	/* If we have nothing to merge with us, just skip. */
-	if (check_adjacent_extents(inode, em)) {
-		ret = 0;
-		goto out;
-	}
+	next_mergeable = defrag_check_next_extent(inode, em);
 
 	/*
-	 * we hit a real extent, if it is big don't bother defragging it again
+	 * we hit a real extent, if it is big or the next extent is not a
+	 * real extent, don't bother defragging it
 	 */
-	if ((*last_len == 0 || *last_len >= thresh) && em->len >= thresh)
+	if ((*last_len == 0 || *last_len >= thresh) &&
+	    (em->len >= thresh || !next_mergeable))
 		ret = 0;
-
 out:
 	/*
 	 * last_len ends up being a counter of how many bytes we've defragged.
@@ -1142,8 +1144,8 @@
 			break;
 
 		if (!should_defrag_range(inode, (u64)i << PAGE_CACHE_SHIFT,
-					 PAGE_CACHE_SIZE, extent_thresh,
-					 &last_len, &skip, &defrag_end)) {
+					 extent_thresh, &last_len, &skip,
+					 &defrag_end)) {
 			unsigned long next;
 			/*
 			 * the should_defrag function tells us how much to skip
@@ -1304,6 +1306,14 @@
 		ret = -EINVAL;
 		goto out_free;
 	}
+	if (device->fs_devices && device->fs_devices->seeding) {
+		printk(KERN_INFO "btrfs: resizer unable to apply on "
+		       "seeding device %llu\n",
+		       (unsigned long long)devid);
+		ret = -EINVAL;
+		goto out_free;
+	}
+
 	if (!strcmp(sizestr, "max"))
 		new_size = device->bdev->bd_inode->i_size;
 	else {
@@ -1345,8 +1355,9 @@
 	do_div(new_size, root->sectorsize);
 	new_size *= root->sectorsize;
 
-	printk(KERN_INFO "btrfs: new size for %s is %llu\n",
-		device->name, (unsigned long long)new_size);
+	printk_in_rcu(KERN_INFO "btrfs: new size for %s is %llu\n",
+		      rcu_str_deref(device->name),
+		      (unsigned long long)new_size);
 
 	if (new_size > old_size) {
 		trans = btrfs_start_transaction(root, 0);
@@ -2264,7 +2275,12 @@
 	di_args->total_bytes = dev->total_bytes;
 	memcpy(di_args->uuid, dev->uuid, sizeof(di_args->uuid));
 	if (dev->name) {
-		strncpy(di_args->path, dev->name, sizeof(di_args->path));
+		struct rcu_string *name;
+
+		rcu_read_lock();
+		name = rcu_dereference(dev->name);
+		strncpy(di_args->path, name->str, sizeof(di_args->path));
+		rcu_read_unlock();
 		di_args->path[sizeof(di_args->path) - 1] = 0;
 	} else {
 		di_args->path[0] = '\0';
diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h
index 497c530..e440aa65 100644
--- a/fs/btrfs/ioctl.h
+++ b/fs/btrfs/ioctl.h
@@ -339,7 +339,7 @@
 #define BTRFS_IOC_WAIT_SYNC  _IOW(BTRFS_IOCTL_MAGIC, 22, __u64)
 #define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \
 				   struct btrfs_ioctl_vol_args_v2)
-#define BTRFS_IOC_SUBVOL_GETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 25, __u64)
+#define BTRFS_IOC_SUBVOL_GETFLAGS _IOR(BTRFS_IOCTL_MAGIC, 25, __u64)
 #define BTRFS_IOC_SUBVOL_SETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 26, __u64)
 #define BTRFS_IOC_SCRUB _IOWR(BTRFS_IOCTL_MAGIC, 27, \
 			      struct btrfs_ioctl_scrub_args)
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index 9e138cd..643335a 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -627,7 +627,27 @@
 	/* start IO across the range first to instantiate any delalloc
 	 * extents
 	 */
-	filemap_write_and_wait_range(inode->i_mapping, start, orig_end);
+	filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
+
+	/*
+	 * So with compression we will find and lock a dirty page and clear the
+	 * first one as dirty, setup an async extent, and immediately return
+	 * with the entire range locked but with nobody actually marked with
+	 * writeback.  So we can't just filemap_write_and_wait_range() and
+	 * expect it to work since it will just kick off a thread to do the
+	 * actual work.  So we need to call filemap_fdatawrite_range _again_
+	 * since it will wait on the page lock, which won't be unlocked until
+	 * after the pages have been marked as writeback and so we're good to go
+	 * from there.  We have to do this otherwise we'll miss the ordered
+	 * extents and that results in badness.  Please Josef, do not think you
+	 * know better and pull this out at some point in the future, it is
+	 * right and you are wrong.
+	 */
+	if (test_bit(BTRFS_INODE_HAS_ASYNC_EXTENT,
+		     &BTRFS_I(inode)->runtime_flags))
+		filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
+
+	filemap_fdatawait_range(inode->i_mapping, start, orig_end);
 
 	end = orig_end;
 	found = 0;
diff --git a/fs/btrfs/rcu-string.h b/fs/btrfs/rcu-string.h
new file mode 100644
index 0000000..9e111e4
--- /dev/null
+++ b/fs/btrfs/rcu-string.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Red Hat.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+struct rcu_string {
+	struct rcu_head rcu;
+	char str[0];
+};
+
+static inline struct rcu_string *rcu_string_strdup(const char *src, gfp_t mask)
+{
+	size_t len = strlen(src) + 1;
+	struct rcu_string *ret = kzalloc(sizeof(struct rcu_string) +
+					 (len * sizeof(char)), mask);
+	if (!ret)
+		return ret;
+	strncpy(ret->str, src, len);
+	return ret;
+}
+
+static inline void rcu_string_free(struct rcu_string *str)
+{
+	if (str)
+		kfree_rcu(str, rcu);
+}
+
+#define printk_in_rcu(fmt, ...) do {	\
+	rcu_read_lock();		\
+	printk(fmt, __VA_ARGS__);	\
+	rcu_read_unlock();		\
+} while (0)
+
+#define printk_ratelimited_in_rcu(fmt, ...) do {	\
+	rcu_read_lock();				\
+	printk_ratelimited(fmt, __VA_ARGS__);		\
+	rcu_read_unlock();				\
+} while (0)
+
+#define rcu_str_deref(rcu_str) ({				\
+	struct rcu_string *__str = rcu_dereference(rcu_str);	\
+	__str->str;						\
+})
diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index a38cfa4..b223620 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -26,6 +26,7 @@
 #include "backref.h"
 #include "extent_io.h"
 #include "check-integrity.h"
+#include "rcu-string.h"
 
 /*
  * This is only the first step towards a full-features scrub. It reads all
@@ -320,10 +321,10 @@
 	 * hold all of the paths here
 	 */
 	for (i = 0; i < ipath->fspath->elem_cnt; ++i)
-		printk(KERN_WARNING "btrfs: %s at logical %llu on dev "
+		printk_in_rcu(KERN_WARNING "btrfs: %s at logical %llu on dev "
 			"%s, sector %llu, root %llu, inode %llu, offset %llu, "
 			"length %llu, links %u (path: %s)\n", swarn->errstr,
-			swarn->logical, swarn->dev->name,
+			swarn->logical, rcu_str_deref(swarn->dev->name),
 			(unsigned long long)swarn->sector, root, inum, offset,
 			min(isize - offset, (u64)PAGE_SIZE), nlink,
 			(char *)(unsigned long)ipath->fspath->val[i]);
@@ -332,10 +333,10 @@
 	return 0;
 
 err:
-	printk(KERN_WARNING "btrfs: %s at logical %llu on dev "
+	printk_in_rcu(KERN_WARNING "btrfs: %s at logical %llu on dev "
 		"%s, sector %llu, root %llu, inode %llu, offset %llu: path "
 		"resolving failed with ret=%d\n", swarn->errstr,
-		swarn->logical, swarn->dev->name,
+		swarn->logical, rcu_str_deref(swarn->dev->name),
 		(unsigned long long)swarn->sector, root, inum, offset, ret);
 
 	free_ipath(ipath);
@@ -390,10 +391,11 @@
 		do {
 			ret = tree_backref_for_extent(&ptr, eb, ei, item_size,
 							&ref_root, &ref_level);
-			printk(KERN_WARNING
+			printk_in_rcu(KERN_WARNING
 				"btrfs: %s at logical %llu on dev %s, "
 				"sector %llu: metadata %s (level %d) in tree "
-				"%llu\n", errstr, swarn.logical, dev->name,
+				"%llu\n", errstr, swarn.logical,
+				rcu_str_deref(dev->name),
 				(unsigned long long)swarn.sector,
 				ref_level ? "node" : "leaf",
 				ret < 0 ? -1 : ref_level,
@@ -580,9 +582,11 @@
 		spin_lock(&sdev->stat_lock);
 		++sdev->stat.uncorrectable_errors;
 		spin_unlock(&sdev->stat_lock);
-		printk_ratelimited(KERN_ERR
+
+		printk_ratelimited_in_rcu(KERN_ERR
 			"btrfs: unable to fixup (nodatasum) error at logical %llu on dev %s\n",
-			(unsigned long long)fixup->logical, sdev->dev->name);
+			(unsigned long long)fixup->logical,
+			rcu_str_deref(sdev->dev->name));
 	}
 
 	btrfs_free_path(path);
@@ -936,18 +940,20 @@
 			spin_lock(&sdev->stat_lock);
 			sdev->stat.corrected_errors++;
 			spin_unlock(&sdev->stat_lock);
-			printk_ratelimited(KERN_ERR
+			printk_ratelimited_in_rcu(KERN_ERR
 				"btrfs: fixed up error at logical %llu on dev %s\n",
-				(unsigned long long)logical, sdev->dev->name);
+				(unsigned long long)logical,
+				rcu_str_deref(sdev->dev->name));
 		}
 	} else {
 did_not_correct_error:
 		spin_lock(&sdev->stat_lock);
 		sdev->stat.uncorrectable_errors++;
 		spin_unlock(&sdev->stat_lock);
-		printk_ratelimited(KERN_ERR
+		printk_ratelimited_in_rcu(KERN_ERR
 			"btrfs: unable to fixup (regular) error at logical %llu on dev %s\n",
-			(unsigned long long)logical, sdev->dev->name);
+			(unsigned long long)logical,
+			rcu_str_deref(sdev->dev->name));
 	}
 
 out:
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 96eb9fe..e239915 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -54,6 +54,7 @@
 #include "version.h"
 #include "export.h"
 #include "compression.h"
+#include "rcu-string.h"
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/btrfs.h>
@@ -1186,6 +1187,10 @@
 		if (ret)
 			goto restore;
 
+		ret = btrfs_resume_balance_async(fs_info);
+		if (ret)
+			goto restore;
+
 		sb->s_flags &= ~MS_RDONLY;
 	}
 
@@ -1482,12 +1487,44 @@
 				   "error %d\n", btrfs_ino(inode), ret);
 }
 
+static int btrfs_show_devname(struct seq_file *m, struct dentry *root)
+{
+	struct btrfs_fs_info *fs_info = btrfs_sb(root->d_sb);
+	struct btrfs_fs_devices *cur_devices;
+	struct btrfs_device *dev, *first_dev = NULL;
+	struct list_head *head;
+	struct rcu_string *name;
+
+	mutex_lock(&fs_info->fs_devices->device_list_mutex);
+	cur_devices = fs_info->fs_devices;
+	while (cur_devices) {
+		head = &cur_devices->devices;
+		list_for_each_entry(dev, head, dev_list) {
+			if (!first_dev || dev->devid < first_dev->devid)
+				first_dev = dev;
+		}
+		cur_devices = cur_devices->seed;
+	}
+
+	if (first_dev) {
+		rcu_read_lock();
+		name = rcu_dereference(first_dev->name);
+		seq_escape(m, name->str, " \t\n\\");
+		rcu_read_unlock();
+	} else {
+		WARN_ON(1);
+	}
+	mutex_unlock(&fs_info->fs_devices->device_list_mutex);
+	return 0;
+}
+
 static const struct super_operations btrfs_super_ops = {
 	.drop_inode	= btrfs_drop_inode,
 	.evict_inode	= btrfs_evict_inode,
 	.put_super	= btrfs_put_super,
 	.sync_fs	= btrfs_sync_fs,
 	.show_options	= btrfs_show_options,
+	.show_devname	= btrfs_show_devname,
 	.write_inode	= btrfs_write_inode,
 	.dirty_inode	= btrfs_fs_dirty_inode,
 	.alloc_inode	= btrfs_alloc_inode,
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 1791c6e..b72b068 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -100,6 +100,10 @@
 		kmem_cache_free(btrfs_transaction_cachep, cur_trans);
 		cur_trans = fs_info->running_transaction;
 		goto loop;
+	} else if (root->fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) {
+		spin_unlock(&root->fs_info->trans_lock);
+		kmem_cache_free(btrfs_transaction_cachep, cur_trans);
+		return -EROFS;
 	}
 
 	atomic_set(&cur_trans->num_writers, 1);
@@ -1213,14 +1217,20 @@
 
 
 static void cleanup_transaction(struct btrfs_trans_handle *trans,
-				struct btrfs_root *root)
+				struct btrfs_root *root, int err)
 {
 	struct btrfs_transaction *cur_trans = trans->transaction;
 
 	WARN_ON(trans->use_count > 1);
 
+	btrfs_abort_transaction(trans, root, err);
+
 	spin_lock(&root->fs_info->trans_lock);
 	list_del_init(&cur_trans->list);
+	if (cur_trans == root->fs_info->running_transaction) {
+		root->fs_info->running_transaction = NULL;
+		root->fs_info->trans_no_join = 0;
+	}
 	spin_unlock(&root->fs_info->trans_lock);
 
 	btrfs_cleanup_one_transaction(trans->transaction, root);
@@ -1526,7 +1536,7 @@
 //	WARN_ON(1);
 	if (current->journal_info == trans)
 		current->journal_info = NULL;
-	cleanup_transaction(trans, root);
+	cleanup_transaction(trans, root, ret);
 
 	return ret;
 }
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 2017d0f..8abeae4 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -690,6 +690,8 @@
 	kfree(name);
 
 	iput(inode);
+
+	btrfs_run_delayed_items(trans, root);
 	return ret;
 }
 
@@ -895,6 +897,7 @@
 				ret = btrfs_unlink_inode(trans, root, dir,
 							 inode, victim_name,
 							 victim_name_len);
+				btrfs_run_delayed_items(trans, root);
 			}
 			kfree(victim_name);
 			ptr = (unsigned long)(victim_ref + 1) + victim_name_len;
@@ -1475,6 +1478,9 @@
 			ret = btrfs_unlink_inode(trans, root, dir, inode,
 						 name, name_len);
 			BUG_ON(ret);
+
+			btrfs_run_delayed_items(trans, root);
+
 			kfree(name);
 			iput(inode);
 
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 7782020..ecaad40 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -35,6 +35,7 @@
 #include "volumes.h"
 #include "async-thread.h"
 #include "check-integrity.h"
+#include "rcu-string.h"
 
 static int init_first_rw_device(struct btrfs_trans_handle *trans,
 				struct btrfs_root *root,
@@ -64,7 +65,7 @@
 		device = list_entry(fs_devices->devices.next,
 				    struct btrfs_device, dev_list);
 		list_del(&device->dev_list);
-		kfree(device->name);
+		rcu_string_free(device->name);
 		kfree(device);
 	}
 	kfree(fs_devices);
@@ -334,8 +335,8 @@
 {
 	struct btrfs_device *device;
 	struct btrfs_fs_devices *fs_devices;
+	struct rcu_string *name;
 	u64 found_transid = btrfs_super_generation(disk_super);
-	char *name;
 
 	fs_devices = find_fsid(disk_super->fsid);
 	if (!fs_devices) {
@@ -369,11 +370,13 @@
 		memcpy(device->uuid, disk_super->dev_item.uuid,
 		       BTRFS_UUID_SIZE);
 		spin_lock_init(&device->io_lock);
-		device->name = kstrdup(path, GFP_NOFS);
-		if (!device->name) {
+
+		name = rcu_string_strdup(path, GFP_NOFS);
+		if (!name) {
 			kfree(device);
 			return -ENOMEM;
 		}
+		rcu_assign_pointer(device->name, name);
 		INIT_LIST_HEAD(&device->dev_alloc_list);
 
 		/* init readahead state */
@@ -390,12 +393,12 @@
 
 		device->fs_devices = fs_devices;
 		fs_devices->num_devices++;
-	} else if (!device->name || strcmp(device->name, path)) {
-		name = kstrdup(path, GFP_NOFS);
+	} else if (!device->name || strcmp(device->name->str, path)) {
+		name = rcu_string_strdup(path, GFP_NOFS);
 		if (!name)
 			return -ENOMEM;
-		kfree(device->name);
-		device->name = name;
+		rcu_string_free(device->name);
+		rcu_assign_pointer(device->name, name);
 		if (device->missing) {
 			fs_devices->missing_devices--;
 			device->missing = 0;
@@ -430,15 +433,22 @@
 
 	/* We have held the volume lock, it is safe to get the devices. */
 	list_for_each_entry(orig_dev, &orig->devices, dev_list) {
+		struct rcu_string *name;
+
 		device = kzalloc(sizeof(*device), GFP_NOFS);
 		if (!device)
 			goto error;
 
-		device->name = kstrdup(orig_dev->name, GFP_NOFS);
-		if (!device->name) {
+		/*
+		 * This is ok to do without rcu read locked because we hold the
+		 * uuid mutex so nothing we touch in here is going to disappear.
+		 */
+		name = rcu_string_strdup(orig_dev->name->str, GFP_NOFS);
+		if (!name) {
 			kfree(device);
 			goto error;
 		}
+		rcu_assign_pointer(device->name, name);
 
 		device->devid = orig_dev->devid;
 		device->work.func = pending_bios_fn;
@@ -491,7 +501,7 @@
 		}
 		list_del_init(&device->dev_list);
 		fs_devices->num_devices--;
-		kfree(device->name);
+		rcu_string_free(device->name);
 		kfree(device);
 	}
 
@@ -516,7 +526,7 @@
 	if (device->bdev)
 		blkdev_put(device->bdev, device->mode);
 
-	kfree(device->name);
+	rcu_string_free(device->name);
 	kfree(device);
 }
 
@@ -540,6 +550,7 @@
 	mutex_lock(&fs_devices->device_list_mutex);
 	list_for_each_entry(device, &fs_devices->devices, dev_list) {
 		struct btrfs_device *new_device;
+		struct rcu_string *name;
 
 		if (device->bdev)
 			fs_devices->open_devices--;
@@ -555,8 +566,11 @@
 		new_device = kmalloc(sizeof(*new_device), GFP_NOFS);
 		BUG_ON(!new_device); /* -ENOMEM */
 		memcpy(new_device, device, sizeof(*new_device));
-		new_device->name = kstrdup(device->name, GFP_NOFS);
-		BUG_ON(device->name && !new_device->name); /* -ENOMEM */
+
+		/* Safe because we are under uuid_mutex */
+		name = rcu_string_strdup(device->name->str, GFP_NOFS);
+		BUG_ON(device->name && !name); /* -ENOMEM */
+		rcu_assign_pointer(new_device->name, name);
 		new_device->bdev = NULL;
 		new_device->writeable = 0;
 		new_device->in_fs_metadata = 0;
@@ -621,9 +635,9 @@
 		if (!device->name)
 			continue;
 
-		bdev = blkdev_get_by_path(device->name, flags, holder);
+		bdev = blkdev_get_by_path(device->name->str, flags, holder);
 		if (IS_ERR(bdev)) {
-			printk(KERN_INFO "open %s failed\n", device->name);
+			printk(KERN_INFO "open %s failed\n", device->name->str);
 			goto error;
 		}
 		filemap_write_and_wait(bdev->bd_inode->i_mapping);
@@ -1632,6 +1646,7 @@
 	struct block_device *bdev;
 	struct list_head *devices;
 	struct super_block *sb = root->fs_info->sb;
+	struct rcu_string *name;
 	u64 total_bytes;
 	int seeding_dev = 0;
 	int ret = 0;
@@ -1671,23 +1686,24 @@
 		goto error;
 	}
 
-	device->name = kstrdup(device_path, GFP_NOFS);
-	if (!device->name) {
+	name = rcu_string_strdup(device_path, GFP_NOFS);
+	if (!name) {
 		kfree(device);
 		ret = -ENOMEM;
 		goto error;
 	}
+	rcu_assign_pointer(device->name, name);
 
 	ret = find_next_devid(root, &device->devid);
 	if (ret) {
-		kfree(device->name);
+		rcu_string_free(device->name);
 		kfree(device);
 		goto error;
 	}
 
 	trans = btrfs_start_transaction(root, 0);
 	if (IS_ERR(trans)) {
-		kfree(device->name);
+		rcu_string_free(device->name);
 		kfree(device);
 		ret = PTR_ERR(trans);
 		goto error;
@@ -1796,7 +1812,7 @@
 	unlock_chunks(root);
 	btrfs_abort_transaction(trans, root, ret);
 	btrfs_end_transaction(trans, root);
-	kfree(device->name);
+	rcu_string_free(device->name);
 	kfree(device);
 error:
 	blkdev_put(bdev, FMODE_EXCL);
@@ -2829,31 +2845,48 @@
 
 static int balance_kthread(void *data)
 {
-	struct btrfs_balance_control *bctl =
-			(struct btrfs_balance_control *)data;
-	struct btrfs_fs_info *fs_info = bctl->fs_info;
+	struct btrfs_fs_info *fs_info = data;
 	int ret = 0;
 
 	mutex_lock(&fs_info->volume_mutex);
 	mutex_lock(&fs_info->balance_mutex);
 
-	set_balance_control(bctl);
-
-	if (btrfs_test_opt(fs_info->tree_root, SKIP_BALANCE)) {
-		printk(KERN_INFO "btrfs: force skipping balance\n");
-	} else {
+	if (fs_info->balance_ctl) {
 		printk(KERN_INFO "btrfs: continuing balance\n");
-		ret = btrfs_balance(bctl, NULL);
+		ret = btrfs_balance(fs_info->balance_ctl, NULL);
 	}
 
 	mutex_unlock(&fs_info->balance_mutex);
 	mutex_unlock(&fs_info->volume_mutex);
+
 	return ret;
 }
 
-int btrfs_recover_balance(struct btrfs_root *tree_root)
+int btrfs_resume_balance_async(struct btrfs_fs_info *fs_info)
 {
 	struct task_struct *tsk;
+
+	spin_lock(&fs_info->balance_lock);
+	if (!fs_info->balance_ctl) {
+		spin_unlock(&fs_info->balance_lock);
+		return 0;
+	}
+	spin_unlock(&fs_info->balance_lock);
+
+	if (btrfs_test_opt(fs_info->tree_root, SKIP_BALANCE)) {
+		printk(KERN_INFO "btrfs: force skipping balance\n");
+		return 0;
+	}
+
+	tsk = kthread_run(balance_kthread, fs_info, "btrfs-balance");
+	if (IS_ERR(tsk))
+		return PTR_ERR(tsk);
+
+	return 0;
+}
+
+int btrfs_recover_balance(struct btrfs_fs_info *fs_info)
+{
 	struct btrfs_balance_control *bctl;
 	struct btrfs_balance_item *item;
 	struct btrfs_disk_balance_args disk_bargs;
@@ -2866,29 +2899,30 @@
 	if (!path)
 		return -ENOMEM;
 
+	key.objectid = BTRFS_BALANCE_OBJECTID;
+	key.type = BTRFS_BALANCE_ITEM_KEY;
+	key.offset = 0;
+
+	ret = btrfs_search_slot(NULL, fs_info->tree_root, &key, path, 0, 0);
+	if (ret < 0)
+		goto out;
+	if (ret > 0) { /* ret = -ENOENT; */
+		ret = 0;
+		goto out;
+	}
+
 	bctl = kzalloc(sizeof(*bctl), GFP_NOFS);
 	if (!bctl) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
-	key.objectid = BTRFS_BALANCE_OBJECTID;
-	key.type = BTRFS_BALANCE_ITEM_KEY;
-	key.offset = 0;
-
-	ret = btrfs_search_slot(NULL, tree_root, &key, path, 0, 0);
-	if (ret < 0)
-		goto out_bctl;
-	if (ret > 0) { /* ret = -ENOENT; */
-		ret = 0;
-		goto out_bctl;
-	}
-
 	leaf = path->nodes[0];
 	item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_balance_item);
 
-	bctl->fs_info = tree_root->fs_info;
-	bctl->flags = btrfs_balance_flags(leaf, item) | BTRFS_BALANCE_RESUME;
+	bctl->fs_info = fs_info;
+	bctl->flags = btrfs_balance_flags(leaf, item);
+	bctl->flags |= BTRFS_BALANCE_RESUME;
 
 	btrfs_balance_data(leaf, item, &disk_bargs);
 	btrfs_disk_balance_args_to_cpu(&bctl->data, &disk_bargs);
@@ -2897,14 +2931,13 @@
 	btrfs_balance_sys(leaf, item, &disk_bargs);
 	btrfs_disk_balance_args_to_cpu(&bctl->sys, &disk_bargs);
 
-	tsk = kthread_run(balance_kthread, bctl, "btrfs-balance");
-	if (IS_ERR(tsk))
-		ret = PTR_ERR(tsk);
-	else
-		goto out;
+	mutex_lock(&fs_info->volume_mutex);
+	mutex_lock(&fs_info->balance_mutex);
 
-out_bctl:
-	kfree(bctl);
+	set_balance_control(bctl);
+
+	mutex_unlock(&fs_info->balance_mutex);
+	mutex_unlock(&fs_info->volume_mutex);
 out:
 	btrfs_free_path(path);
 	return ret;
@@ -4045,16 +4078,18 @@
 
 			BUG_ON(stripe_index >= bbio->num_stripes);
 			dev = bbio->stripes[stripe_index].dev;
-			if (bio->bi_rw & WRITE)
-				btrfs_dev_stat_inc(dev,
-						   BTRFS_DEV_STAT_WRITE_ERRS);
-			else
-				btrfs_dev_stat_inc(dev,
-						   BTRFS_DEV_STAT_READ_ERRS);
-			if ((bio->bi_rw & WRITE_FLUSH) == WRITE_FLUSH)
-				btrfs_dev_stat_inc(dev,
-						   BTRFS_DEV_STAT_FLUSH_ERRS);
-			btrfs_dev_stat_print_on_error(dev);
+			if (dev->bdev) {
+				if (bio->bi_rw & WRITE)
+					btrfs_dev_stat_inc(dev,
+						BTRFS_DEV_STAT_WRITE_ERRS);
+				else
+					btrfs_dev_stat_inc(dev,
+						BTRFS_DEV_STAT_READ_ERRS);
+				if ((bio->bi_rw & WRITE_FLUSH) == WRITE_FLUSH)
+					btrfs_dev_stat_inc(dev,
+						BTRFS_DEV_STAT_FLUSH_ERRS);
+				btrfs_dev_stat_print_on_error(dev);
+			}
 		}
 	}
 
@@ -4204,10 +4239,17 @@
 		bio->bi_sector = bbio->stripes[dev_nr].physical >> 9;
 		dev = bbio->stripes[dev_nr].dev;
 		if (dev && dev->bdev && (rw != WRITE || dev->writeable)) {
+#ifdef DEBUG
+			struct rcu_string *name;
+
+			rcu_read_lock();
+			name = rcu_dereference(dev->name);
 			pr_debug("btrfs_map_bio: rw %d, secor=%llu, dev=%lu "
 				 "(%s id %llu), size=%u\n", rw,
 				 (u64)bio->bi_sector, (u_long)dev->bdev->bd_dev,
-				 dev->name, dev->devid, bio->bi_size);
+				 name->str, dev->devid, bio->bi_size);
+			rcu_read_unlock();
+#endif
 			bio->bi_bdev = dev->bdev;
 			if (async_submit)
 				schedule_bio(root, dev, rw, bio);
@@ -4694,8 +4736,9 @@
 		key.offset = device->devid;
 		ret = btrfs_search_slot(NULL, dev_root, &key, path, 0, 0);
 		if (ret) {
-			printk(KERN_WARNING "btrfs: no dev_stats entry found for device %s (devid %llu) (OK on first mount after mkfs)\n",
-			       device->name, (unsigned long long)device->devid);
+			printk_in_rcu(KERN_WARNING "btrfs: no dev_stats entry found for device %s (devid %llu) (OK on first mount after mkfs)\n",
+				      rcu_str_deref(device->name),
+				      (unsigned long long)device->devid);
 			__btrfs_reset_dev_stats(device);
 			device->dev_stats_valid = 1;
 			btrfs_release_path(path);
@@ -4747,8 +4790,8 @@
 	BUG_ON(!path);
 	ret = btrfs_search_slot(trans, dev_root, &key, path, -1, 1);
 	if (ret < 0) {
-		printk(KERN_WARNING "btrfs: error %d while searching for dev_stats item for device %s!\n",
-		       ret, device->name);
+		printk_in_rcu(KERN_WARNING "btrfs: error %d while searching for dev_stats item for device %s!\n",
+			      ret, rcu_str_deref(device->name));
 		goto out;
 	}
 
@@ -4757,8 +4800,8 @@
 		/* need to delete old one and insert a new one */
 		ret = btrfs_del_item(trans, dev_root, path);
 		if (ret != 0) {
-			printk(KERN_WARNING "btrfs: delete too small dev_stats item for device %s failed %d!\n",
-			       device->name, ret);
+			printk_in_rcu(KERN_WARNING "btrfs: delete too small dev_stats item for device %s failed %d!\n",
+				      rcu_str_deref(device->name), ret);
 			goto out;
 		}
 		ret = 1;
@@ -4770,8 +4813,8 @@
 		ret = btrfs_insert_empty_item(trans, dev_root, path,
 					      &key, sizeof(*ptr));
 		if (ret < 0) {
-			printk(KERN_WARNING "btrfs: insert dev_stats item for device %s failed %d!\n",
-			       device->name, ret);
+			printk_in_rcu(KERN_WARNING "btrfs: insert dev_stats item for device %s failed %d!\n",
+				      rcu_str_deref(device->name), ret);
 			goto out;
 		}
 	}
@@ -4823,9 +4866,9 @@
 {
 	if (!dev->dev_stats_valid)
 		return;
-	printk_ratelimited(KERN_ERR
+	printk_ratelimited_in_rcu(KERN_ERR
 			   "btrfs: bdev %s errs: wr %u, rd %u, flush %u, corrupt %u, gen %u\n",
-			   dev->name,
+			   rcu_str_deref(dev->name),
 			   btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_WRITE_ERRS),
 			   btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_READ_ERRS),
 			   btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_FLUSH_ERRS),
@@ -4837,8 +4880,8 @@
 
 static void btrfs_dev_stat_print_on_load(struct btrfs_device *dev)
 {
-	printk(KERN_INFO "btrfs: bdev %s errs: wr %u, rd %u, flush %u, corrupt %u, gen %u\n",
-	       dev->name,
+	printk_in_rcu(KERN_INFO "btrfs: bdev %s errs: wr %u, rd %u, flush %u, corrupt %u, gen %u\n",
+	       rcu_str_deref(dev->name),
 	       btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_WRITE_ERRS),
 	       btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_READ_ERRS),
 	       btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_FLUSH_ERRS),
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index 3406a88..95f66376 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -58,7 +58,7 @@
 	/* the mode sent to blkdev_get */
 	fmode_t mode;
 
-	char *name;
+	struct rcu_string *name;
 
 	/* the internal btrfs device id */
 	u64 devid;
@@ -281,7 +281,8 @@
 int btrfs_init_new_device(struct btrfs_root *root, char *path);
 int btrfs_balance(struct btrfs_balance_control *bctl,
 		  struct btrfs_ioctl_balance_args *bargs);
-int btrfs_recover_balance(struct btrfs_root *tree_root);
+int btrfs_resume_balance_async(struct btrfs_fs_info *fs_info);
+int btrfs_recover_balance(struct btrfs_fs_info *fs_info);
 int btrfs_pause_balance(struct btrfs_fs_info *fs_info);
 int btrfs_cancel_balance(struct btrfs_fs_info *fs_info);
 int btrfs_chunk_readonly(struct btrfs_root *root, u64 chunk_offset);
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 173b1d2..8b67304 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -54,7 +54,12 @@
 	(CONGESTION_ON_THRESH(congestion_kb) -				\
 	 (CONGESTION_ON_THRESH(congestion_kb) >> 2))
 
-
+static inline struct ceph_snap_context *page_snap_context(struct page *page)
+{
+	if (PagePrivate(page))
+		return (void *)page->private;
+	return NULL;
+}
 
 /*
  * Dirty a page.  Optimistically adjust accounting, on the assumption
@@ -142,10 +147,9 @@
 {
 	struct inode *inode;
 	struct ceph_inode_info *ci;
-	struct ceph_snap_context *snapc = (void *)page->private;
+	struct ceph_snap_context *snapc = page_snap_context(page);
 
 	BUG_ON(!PageLocked(page));
-	BUG_ON(!page->private);
 	BUG_ON(!PagePrivate(page));
 	BUG_ON(!page->mapping);
 
@@ -182,7 +186,6 @@
 	struct inode *inode = page->mapping ? page->mapping->host : NULL;
 	dout("%p releasepage %p idx %lu\n", inode, page, page->index);
 	WARN_ON(PageDirty(page));
-	WARN_ON(page->private);
 	WARN_ON(PagePrivate(page));
 	return 0;
 }
@@ -443,7 +446,7 @@
 	osdc = &fsc->client->osdc;
 
 	/* verify this is a writeable snap context */
-	snapc = (void *)page->private;
+	snapc = page_snap_context(page);
 	if (snapc == NULL) {
 		dout("writepage %p page %p not dirty?\n", inode, page);
 		goto out;
@@ -451,7 +454,7 @@
 	oldest = get_oldest_context(inode, &snap_size);
 	if (snapc->seq > oldest->seq) {
 		dout("writepage %p page %p snapc %p not writeable - noop\n",
-		     inode, page, (void *)page->private);
+		     inode, page, snapc);
 		/* we should only noop if called by kswapd */
 		WARN_ON((current->flags & PF_MEMALLOC) == 0);
 		ceph_put_snap_context(oldest);
@@ -591,7 +594,7 @@
 			clear_bdi_congested(&fsc->backing_dev_info,
 					    BLK_RW_ASYNC);
 
-		ceph_put_snap_context((void *)page->private);
+		ceph_put_snap_context(page_snap_context(page));
 		page->private = 0;
 		ClearPagePrivate(page);
 		dout("unlocking %d %p\n", i, page);
@@ -795,7 +798,7 @@
 			}
 
 			/* only if matching snap context */
-			pgsnapc = (void *)page->private;
+			pgsnapc = page_snap_context(page);
 			if (pgsnapc->seq > snapc->seq) {
 				dout("page snapc %p %lld > oldest %p %lld\n",
 				     pgsnapc, pgsnapc->seq, snapc, snapc->seq);
@@ -984,7 +987,7 @@
 	BUG_ON(!ci->i_snap_realm);
 	down_read(&mdsc->snap_rwsem);
 	BUG_ON(!ci->i_snap_realm->cached_context);
-	snapc = (void *)page->private;
+	snapc = page_snap_context(page);
 	if (snapc && snapc != ci->i_head_snapc) {
 		/*
 		 * this page is already dirty in another (older) snap
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 78db68a..0ae86dd 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1653,24 +1653,26 @@
 			 * If yes, we have encountered a double deliminator
 			 * reset the NULL character to the deliminator
 			 */
-			if (tmp_end < end && tmp_end[1] == delim)
+			if (tmp_end < end && tmp_end[1] == delim) {
 				tmp_end[0] = delim;
 
-			/* Keep iterating until we get to a single deliminator
-			 * OR the end
-			 */
-			while ((tmp_end = strchr(tmp_end, delim)) != NULL &&
-			       (tmp_end[1] == delim)) {
-				tmp_end = (char *) &tmp_end[2];
-			}
+				/* Keep iterating until we get to a single
+				 * deliminator OR the end
+				 */
+				while ((tmp_end = strchr(tmp_end, delim))
+					!= NULL && (tmp_end[1] == delim)) {
+						tmp_end = (char *) &tmp_end[2];
+				}
 
-			/* Reset var options to point to next element */
-			if (tmp_end) {
-				tmp_end[0] = '\0';
-				options = (char *) &tmp_end[1];
-			} else
-				/* Reached the end of the mount option string */
-				options = end;
+				/* Reset var options to point to next element */
+				if (tmp_end) {
+					tmp_end[0] = '\0';
+					options = (char *) &tmp_end[1];
+				} else
+					/* Reached the end of the mount option
+					 * string */
+					options = end;
+			}
 
 			/* Now build new password string */
 			temp_len = strlen(value);
@@ -3493,18 +3495,15 @@
 	 * MS-CIFS indicates that servers are only limited by the client's
 	 * bufsize for reads, testing against win98se shows that it throws
 	 * INVALID_PARAMETER errors if you try to request too large a read.
+	 * OS/2 just sends back short reads.
 	 *
-	 * If the server advertises a MaxBufferSize of less than one page,
-	 * assume that it also can't satisfy reads larger than that either.
-	 *
-	 * FIXME: Is there a better heuristic for this?
+	 * If the server doesn't advertise CAP_LARGE_READ_X, then assume that
+	 * it can't handle a read request larger than its MaxBufferSize either.
 	 */
 	if (tcon->unix_ext && (unix_cap & CIFS_UNIX_LARGE_READ_CAP))
 		defsize = CIFS_DEFAULT_IOSIZE;
 	else if (server->capabilities & CAP_LARGE_READ_X)
 		defsize = CIFS_DEFAULT_NON_POSIX_RSIZE;
-	else if (server->maxBuf >= PAGE_CACHE_SIZE)
-		defsize = CIFSMaxBufSize;
 	else
 		defsize = server->maxBuf - sizeof(READ_RSP);
 
diff --git a/fs/ecryptfs/kthread.c b/fs/ecryptfs/kthread.c
index 69f994a..0dbe58a 100644
--- a/fs/ecryptfs/kthread.c
+++ b/fs/ecryptfs/kthread.c
@@ -149,7 +149,7 @@
 	(*lower_file) = dentry_open(lower_dentry, lower_mnt, flags, cred);
 	if (!IS_ERR(*lower_file))
 		goto out;
-	if (flags & O_RDONLY) {
+	if ((flags & O_ACCMODE) == O_RDONLY) {
 		rc = PTR_ERR((*lower_file));
 		goto out;
 	}
diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index 3a06f40..c0038f6 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -49,7 +49,10 @@
 	mutex_lock(&ecryptfs_daemon_hash_mux);
 	/* TODO: Just use file->private_data? */
 	rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
-	BUG_ON(rc || !daemon);
+	if (rc || !daemon) {
+		mutex_unlock(&ecryptfs_daemon_hash_mux);
+		return -EINVAL;
+	}
 	mutex_lock(&daemon->mux);
 	mutex_unlock(&ecryptfs_daemon_hash_mux);
 	if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
@@ -122,6 +125,7 @@
 		goto out_unlock_daemon;
 	}
 	daemon->flags |= ECRYPTFS_DAEMON_MISCDEV_OPEN;
+	file->private_data = daemon;
 	atomic_inc(&ecryptfs_num_miscdev_opens);
 out_unlock_daemon:
 	mutex_unlock(&daemon->mux);
@@ -152,9 +156,9 @@
 
 	mutex_lock(&ecryptfs_daemon_hash_mux);
 	rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
-	BUG_ON(rc || !daemon);
+	if (rc || !daemon)
+		daemon = file->private_data;
 	mutex_lock(&daemon->mux);
-	BUG_ON(daemon->pid != task_pid(current));
 	BUG_ON(!(daemon->flags & ECRYPTFS_DAEMON_MISCDEV_OPEN));
 	daemon->flags &= ~ECRYPTFS_DAEMON_MISCDEV_OPEN;
 	atomic_dec(&ecryptfs_num_miscdev_opens);
@@ -191,31 +195,32 @@
 			  struct ecryptfs_msg_ctx *msg_ctx, u8 msg_type,
 			  u16 msg_flags, struct ecryptfs_daemon *daemon)
 {
-	int rc = 0;
+	struct ecryptfs_message *msg;
 
-	mutex_lock(&msg_ctx->mux);
-	msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
-			       GFP_KERNEL);
-	if (!msg_ctx->msg) {
-		rc = -ENOMEM;
+	msg = kmalloc((sizeof(*msg) + data_size), GFP_KERNEL);
+	if (!msg) {
 		printk(KERN_ERR "%s: Out of memory whilst attempting "
 		       "to kmalloc(%zd, GFP_KERNEL)\n", __func__,
-		       (sizeof(*msg_ctx->msg) + data_size));
-		goto out_unlock;
+		       (sizeof(*msg) + data_size));
+		return -ENOMEM;
 	}
+
+	mutex_lock(&msg_ctx->mux);
+	msg_ctx->msg = msg;
 	msg_ctx->msg->index = msg_ctx->index;
 	msg_ctx->msg->data_len = data_size;
 	msg_ctx->type = msg_type;
 	memcpy(msg_ctx->msg->data, data, data_size);
 	msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
-	mutex_lock(&daemon->mux);
 	list_add_tail(&msg_ctx->daemon_out_list, &daemon->msg_ctx_out_queue);
+	mutex_unlock(&msg_ctx->mux);
+
+	mutex_lock(&daemon->mux);
 	daemon->num_queued_msg_ctx++;
 	wake_up_interruptible(&daemon->wait);
 	mutex_unlock(&daemon->mux);
-out_unlock:
-	mutex_unlock(&msg_ctx->mux);
-	return rc;
+
+	return 0;
 }
 
 /*
@@ -269,8 +274,16 @@
 	mutex_lock(&ecryptfs_daemon_hash_mux);
 	/* TODO: Just use file->private_data? */
 	rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
-	BUG_ON(rc || !daemon);
+	if (rc || !daemon) {
+		mutex_unlock(&ecryptfs_daemon_hash_mux);
+		return -EINVAL;
+	}
 	mutex_lock(&daemon->mux);
+	if (task_pid(current) != daemon->pid) {
+		mutex_unlock(&daemon->mux);
+		mutex_unlock(&ecryptfs_daemon_hash_mux);
+		return -EPERM;
+	}
 	if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
 		rc = 0;
 		mutex_unlock(&ecryptfs_daemon_hash_mux);
@@ -307,9 +320,6 @@
 		 * message from the queue; try again */
 		goto check_list;
 	}
-	BUG_ON(euid != daemon->euid);
-	BUG_ON(current_user_ns() != daemon->user_ns);
-	BUG_ON(task_pid(current) != daemon->pid);
 	msg_ctx = list_first_entry(&daemon->msg_ctx_out_queue,
 				   struct ecryptfs_msg_ctx, daemon_out_list);
 	BUG_ON(!msg_ctx);
diff --git a/fs/exec.c b/fs/exec.c
index a79786a..da27b91 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -819,10 +819,10 @@
 	/* Notify parent that we're no longer interested in the old VM */
 	tsk = current;
 	old_mm = current->mm;
-	sync_mm_rss(old_mm);
 	mm_release(tsk, old_mm);
 
 	if (old_mm) {
+		sync_mm_rss(old_mm);
 		/*
 		 * Make sure that if there is a core dump in progress
 		 * for the old mm, we get out and die instead of going
diff --git a/fs/exofs/sys.c b/fs/exofs/sys.c
index e32bc91..5a7b691 100644
--- a/fs/exofs/sys.c
+++ b/fs/exofs/sys.c
@@ -109,7 +109,7 @@
 static struct kobj_type uuid_ktype = {
 };
 
-void exofs_sysfs_dbg_print()
+void exofs_sysfs_dbg_print(void)
 {
 #ifdef CONFIG_EXOFS_DEBUG
 	struct kobject *k_name, *k_tmp;
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 8d2fb8c..41a3ccf 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -664,6 +664,7 @@
 			/* Wait for I_SYNC. This function drops i_lock... */
 			inode_sleep_on_writeback(inode);
 			/* Inode may be gone, start again */
+			spin_lock(&wb->list_lock);
 			continue;
 		}
 		inode->i_state |= I_SYNC;
diff --git a/fs/hfsplus/ioctl.c b/fs/hfsplus/ioctl.c
index c640ba5..09addc8 100644
--- a/fs/hfsplus/ioctl.c
+++ b/fs/hfsplus/ioctl.c
@@ -31,6 +31,7 @@
 	struct hfsplus_sb_info *sbi = HFSPLUS_SB(inode->i_sb);
 	struct hfsplus_vh *vh = sbi->s_vhdr;
 	struct hfsplus_vh *bvh = sbi->s_backup_vhdr;
+	u32 cnid = (unsigned long)dentry->d_fsdata;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
@@ -41,8 +42,12 @@
 	vh->finder_info[0] = bvh->finder_info[0] =
 		cpu_to_be32(parent_ino(dentry));
 
-	/* Bootloader */
-	vh->finder_info[1] = bvh->finder_info[1] = cpu_to_be32(inode->i_ino);
+	/*
+	 * Bootloader. Just using the inode here breaks in the case of
+	 * hard links - the firmware wants the ID of the hard link file,
+	 * but the inode points at the indirect inode
+	 */
+	vh->finder_info[1] = bvh->finder_info[1] = cpu_to_be32(cnid);
 
 	/* Per spec, the OS X system folder - same as finder_info[0] here */
 	vh->finder_info[5] = bvh->finder_info[5] =
diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c
index 7daf4b8..90effcc 100644
--- a/fs/hfsplus/wrapper.c
+++ b/fs/hfsplus/wrapper.c
@@ -56,7 +56,7 @@
 	DECLARE_COMPLETION_ONSTACK(wait);
 	struct bio *bio;
 	int ret = 0;
-	unsigned int io_size;
+	u64 io_size;
 	loff_t start;
 	int offset;
 
diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
index 970659d..23ff18f 100644
--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -17,7 +17,6 @@
 #include <linux/kthread.h>
 #include <linux/sunrpc/svcauth_gss.h>
 #include <linux/sunrpc/bc_xprt.h>
-#include <linux/nsproxy.h>
 
 #include <net/inet_sock.h>
 
@@ -107,7 +106,7 @@
 {
 	int ret;
 
-	ret = svc_create_xprt(serv, "tcp", xprt->xprt_net, PF_INET,
+	ret = svc_create_xprt(serv, "tcp", &init_net, PF_INET,
 				nfs_callback_set_tcpport, SVC_SOCK_ANONYMOUS);
 	if (ret <= 0)
 		goto out_err;
@@ -115,7 +114,7 @@
 	dprintk("NFS: Callback listener port = %u (af %u)\n",
 			nfs_callback_tcpport, PF_INET);
 
-	ret = svc_create_xprt(serv, "tcp", xprt->xprt_net, PF_INET6,
+	ret = svc_create_xprt(serv, "tcp", &init_net, PF_INET6,
 				nfs_callback_set_tcpport, SVC_SOCK_ANONYMOUS);
 	if (ret > 0) {
 		nfs_callback_tcpport6 = ret;
@@ -184,7 +183,7 @@
 	 * fore channel connection.
 	 * Returns the input port (0) and sets the svc_serv bc_xprt on success
 	 */
-	ret = svc_create_xprt(serv, "tcp-bc", xprt->xprt_net, PF_INET, 0,
+	ret = svc_create_xprt(serv, "tcp-bc", &init_net, PF_INET, 0,
 			      SVC_SOCK_ANONYMOUS);
 	if (ret < 0) {
 		rqstp = ERR_PTR(ret);
@@ -254,7 +253,7 @@
 	char svc_name[12];
 	int ret = 0;
 	int minorversion_setup;
-	struct net *net = current->nsproxy->net_ns;
+	struct net *net = &init_net;
 
 	mutex_lock(&nfs_callback_mutex);
 	if (cb_info->users++ || cb_info->task != NULL) {
@@ -330,7 +329,7 @@
 	cb_info->users--;
 	if (cb_info->users == 0 && cb_info->task != NULL) {
 		kthread_stop(cb_info->task);
-		svc_shutdown_net(cb_info->serv, current->nsproxy->net_ns);
+		svc_shutdown_net(cb_info->serv, &init_net);
 		svc_exit_thread(cb_info->rqst);
 		cb_info->serv = NULL;
 		cb_info->rqst = NULL;
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index 95bfc24..e64b01d 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -455,9 +455,9 @@
 	args->csa_nrclists = ntohl(*p++);
 	args->csa_rclists = NULL;
 	if (args->csa_nrclists) {
-		args->csa_rclists = kmalloc(args->csa_nrclists *
-					    sizeof(*args->csa_rclists),
-					    GFP_KERNEL);
+		args->csa_rclists = kmalloc_array(args->csa_nrclists,
+						  sizeof(*args->csa_rclists),
+						  GFP_KERNEL);
 		if (unlikely(args->csa_rclists == NULL))
 			goto out;
 
@@ -696,7 +696,7 @@
 				       const struct cb_sequenceres *res)
 {
 	__be32 *p;
-	unsigned status = res->csr_status;
+	__be32 status = res->csr_status;
 
 	if (unlikely(status != 0))
 		goto out;
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 7d10875..f005b5b 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -207,7 +207,6 @@
 static void nfs4_shutdown_session(struct nfs_client *clp)
 {
 	if (nfs4_has_session(clp)) {
-		nfs4_deviceid_purge_client(clp);
 		nfs4_destroy_session(clp->cl_session);
 		nfs4_destroy_clientid(clp);
 	}
@@ -544,8 +543,6 @@
 
 	smp_rmb();
 
-	BUG_ON(clp->cl_cons_state != NFS_CS_READY);
-
 	dprintk("<-- %s found nfs_client %p for %s\n",
 		__func__, clp, cl_init->hostname ?: "");
 	return clp;
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index ad2775d3..9a4cbfc 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -490,6 +490,7 @@
 			dreq->error = -EIO;
 			spin_unlock(cinfo.lock);
 		}
+		nfs_release_request(req);
 	}
 	nfs_pageio_complete(&desc);
 
@@ -523,9 +524,9 @@
 		nfs_list_remove_request(req);
 		if (dreq->flags == NFS_ODIRECT_RESCHED_WRITES) {
 			/* Note the rewrite will go through mds */
-			kref_get(&req->wb_kref);
 			nfs_mark_request_commit(req, NULL, &cinfo);
-		}
+		} else
+			nfs_release_request(req);
 		nfs_unlock_and_release_request(req);
 	}
 
@@ -716,12 +717,12 @@
 			if (dreq->flags == NFS_ODIRECT_RESCHED_WRITES)
 				bit = NFS_IOHDR_NEED_RESCHED;
 			else if (dreq->flags == 0) {
-				memcpy(&dreq->verf, &req->wb_verf,
+				memcpy(&dreq->verf, hdr->verf,
 				       sizeof(dreq->verf));
 				bit = NFS_IOHDR_NEED_COMMIT;
 				dreq->flags = NFS_ODIRECT_DO_COMMIT;
 			} else if (dreq->flags == NFS_ODIRECT_DO_COMMIT) {
-				if (memcmp(&dreq->verf, &req->wb_verf, sizeof(dreq->verf))) {
+				if (memcmp(&dreq->verf, hdr->verf, sizeof(dreq->verf))) {
 					dreq->flags = NFS_ODIRECT_RESCHED_WRITES;
 					bit = NFS_IOHDR_NEED_RESCHED;
 				} else
diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c
index b5b86a0..864c51e 100644
--- a/fs/nfs/idmap.c
+++ b/fs/nfs/idmap.c
@@ -57,6 +57,11 @@
 static const struct cred *id_resolver_cache;
 static struct key_type key_type_id_resolver_legacy;
 
+struct idmap {
+	struct rpc_pipe		*idmap_pipe;
+	struct key_construction	*idmap_key_cons;
+	struct mutex		idmap_mutex;
+};
 
 /**
  * nfs_fattr_init_names - initialise the nfs_fattr owner_name/group_name fields
@@ -310,9 +315,11 @@
 					    name, namelen, type, data,
 					    data_size, NULL);
 	if (ret < 0) {
+		mutex_lock(&idmap->idmap_mutex);
 		ret = nfs_idmap_request_key(&key_type_id_resolver_legacy,
 					    name, namelen, type, data,
 					    data_size, idmap);
+		mutex_unlock(&idmap->idmap_mutex);
 	}
 	return ret;
 }
@@ -354,11 +361,6 @@
 /* idmap classic begins here */
 module_param(nfs_idmap_cache_timeout, int, 0644);
 
-struct idmap {
-	struct rpc_pipe		*idmap_pipe;
-	struct key_construction	*idmap_key_cons;
-};
-
 enum {
 	Opt_find_uid, Opt_find_gid, Opt_find_user, Opt_find_group, Opt_find_err
 };
@@ -469,6 +471,7 @@
 		return error;
 	}
 	idmap->idmap_pipe = pipe;
+	mutex_init(&idmap->idmap_mutex);
 
 	clp->cl_idmap = idmap;
 	return 0;
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index e605d69..f729698 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1530,7 +1530,6 @@
 	nfsi->delegation_state = 0;
 	init_rwsem(&nfsi->rwsem);
 	nfsi->layout = NULL;
-	atomic_set(&nfsi->commit_info.rpcs_out, 0);
 #endif
 }
 
@@ -1545,6 +1544,7 @@
 	INIT_LIST_HEAD(&nfsi->commit_info.list);
 	nfsi->npages = 0;
 	nfsi->commit_info.ncommit = 0;
+	atomic_set(&nfsi->commit_info.rpcs_out, 0);
 	atomic_set(&nfsi->silly_count, 1);
 	INIT_HLIST_HEAD(&nfsi->silly_list);
 	init_waitqueue_head(&nfsi->waitqueue);
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index c6827f93..cc5900a 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -295,7 +295,7 @@
 
 extern const struct nfs4_minor_version_ops *nfs_v4_minor_ops[];
 
-extern const u32 nfs4_fattr_bitmap[2];
+extern const u32 nfs4_fattr_bitmap[3];
 extern const u32 nfs4_statfs_bitmap[2];
 extern const u32 nfs4_pathconf_bitmap[2];
 extern const u32 nfs4_fsinfo_bitmap[3];
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index d48dbef..15fc7e4 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -105,6 +105,8 @@
 		return -EINVAL;
 	case -NFS4ERR_SHARE_DENIED:
 		return -EACCES;
+	case -NFS4ERR_MINOR_VERS_MISMATCH:
+		return -EPROTONOSUPPORT;
 	default:
 		dprintk("%s could not handle NFSv4 error %d\n",
 				__func__, -err);
@@ -116,7 +118,7 @@
 /*
  * This is our standard bitmap for GETATTR requests.
  */
-const u32 nfs4_fattr_bitmap[2] = {
+const u32 nfs4_fattr_bitmap[3] = {
 	FATTR4_WORD0_TYPE
 	| FATTR4_WORD0_CHANGE
 	| FATTR4_WORD0_SIZE
@@ -133,6 +135,24 @@
 	| FATTR4_WORD1_TIME_MODIFY
 };
 
+static const u32 nfs4_pnfs_open_bitmap[3] = {
+	FATTR4_WORD0_TYPE
+	| FATTR4_WORD0_CHANGE
+	| FATTR4_WORD0_SIZE
+	| FATTR4_WORD0_FSID
+	| FATTR4_WORD0_FILEID,
+	FATTR4_WORD1_MODE
+	| FATTR4_WORD1_NUMLINKS
+	| FATTR4_WORD1_OWNER
+	| FATTR4_WORD1_OWNER_GROUP
+	| FATTR4_WORD1_RAWDEV
+	| FATTR4_WORD1_SPACE_USED
+	| FATTR4_WORD1_TIME_ACCESS
+	| FATTR4_WORD1_TIME_METADATA
+	| FATTR4_WORD1_TIME_MODIFY,
+	FATTR4_WORD2_MDSTHRESHOLD
+};
+
 const u32 nfs4_statfs_bitmap[2] = {
 	FATTR4_WORD0_FILES_AVAIL
 	| FATTR4_WORD0_FILES_FREE
@@ -844,6 +864,7 @@
 	p->o_arg.name = &dentry->d_name;
 	p->o_arg.server = server;
 	p->o_arg.bitmask = server->attr_bitmask;
+	p->o_arg.open_bitmap = &nfs4_fattr_bitmap[0];
 	p->o_arg.claim = NFS4_OPEN_CLAIM_NULL;
 	if (attrs != NULL && attrs->ia_valid != 0) {
 		__be32 verf[2];
@@ -1820,6 +1841,7 @@
 		opendata->f_attr.mdsthreshold = pnfs_mdsthreshold_alloc();
 		if (!opendata->f_attr.mdsthreshold)
 			goto err_opendata_put;
+		opendata->o_arg.open_bitmap = &nfs4_pnfs_open_bitmap[0];
 	}
 	if (dentry->d_inode != NULL)
 		opendata->state = nfs4_get_open_state(dentry->d_inode, sp);
@@ -1880,6 +1902,7 @@
 	struct nfs4_state *res;
 	int status;
 
+	fmode &= FMODE_READ|FMODE_WRITE;
 	do {
 		status = _nfs4_do_open(dir, dentry, fmode, flags, sattr, cred,
 				       &res, ctx_th);
@@ -2526,6 +2549,14 @@
 
 	nfs_fattr_init(fattr);
 	
+	/* Deal with open(O_TRUNC) */
+	if (sattr->ia_valid & ATTR_OPEN)
+		sattr->ia_valid &= ~(ATTR_MTIME|ATTR_CTIME|ATTR_OPEN);
+
+	/* Optimization: if the end result is no change, don't RPC */
+	if ((sattr->ia_valid & ~(ATTR_FILE)) == 0)
+		return 0;
+
 	/* Search for an existing open(O_WRITE) file */
 	if (sattr->ia_valid & ATTR_FILE) {
 		struct nfs_open_context *ctx;
@@ -2537,10 +2568,6 @@
 		}
 	}
 
-	/* Deal with open(O_TRUNC) */
-	if (sattr->ia_valid & ATTR_OPEN)
-		sattr->ia_valid &= ~(ATTR_MTIME|ATTR_CTIME|ATTR_OPEN);
-
 	status = nfs4_do_setattr(inode, cred, fattr, sattr, state);
 	if (status == 0)
 		nfs_setattr_update_inode(inode, sattr);
@@ -5275,7 +5302,7 @@
 
 	status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
 	if (status)
-		pr_warn("NFS: Got error %d from the server %s on "
+		dprintk("NFS: Got error %d from the server %s on "
 			"DESTROY_CLIENTID.", status, clp->cl_hostname);
 	return status;
 }
@@ -5746,8 +5773,7 @@
 	status = rpc_call_sync(session->clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
 
 	if (status)
-		printk(KERN_WARNING
-			"NFS: Got error %d from the server on DESTROY_SESSION. "
+		dprintk("NFS: Got error %d from the server on DESTROY_SESSION. "
 			"Session has been destroyed regardless...\n", status);
 
 	dprintk("<-- nfs4_proc_destroy_session\n");
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index c679b9e..f38300e 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -244,6 +244,16 @@
 	return nfs4_wait_on_slot_tbl(&ses->fc_slot_table);
 }
 
+static void nfs41_finish_session_reset(struct nfs_client *clp)
+{
+	clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
+	clear_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state);
+	/* create_session negotiated new slot table */
+	clear_bit(NFS4CLNT_RECALL_SLOT, &clp->cl_state);
+	clear_bit(NFS4CLNT_BIND_CONN_TO_SESSION, &clp->cl_state);
+	nfs41_setup_state_renewal(clp);
+}
+
 int nfs41_init_clientid(struct nfs_client *clp, struct rpc_cred *cred)
 {
 	int status;
@@ -259,8 +269,7 @@
 	status = nfs4_proc_create_session(clp, cred);
 	if (status != 0)
 		goto out;
-	clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
-	nfs41_setup_state_renewal(clp);
+	nfs41_finish_session_reset(clp);
 	nfs_mark_client_ready(clp, NFS_CS_READY);
 out:
 	return status;
@@ -1772,16 +1781,9 @@
 		status = nfs4_handle_reclaim_lease_error(clp, status);
 		goto out;
 	}
-	clear_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state);
-	/* create_session negotiated new slot table */
-	clear_bit(NFS4CLNT_RECALL_SLOT, &clp->cl_state);
-	clear_bit(NFS4CLNT_BIND_CONN_TO_SESSION, &clp->cl_state);
+	nfs41_finish_session_reset(clp);
 	dprintk("%s: session reset was successful for server %s!\n",
 			__func__, clp->cl_hostname);
-
-	 /* Let the state manager reestablish state */
-	if (!test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state))
-		nfs41_setup_state_renewal(clp);
 out:
 	if (cred)
 		put_rpccred(cred);
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index ee4a74d..18fae29 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -1198,12 +1198,13 @@
 }
 
 static void encode_getfattr_open(struct xdr_stream *xdr, const u32 *bitmask,
+				 const u32 *open_bitmap,
 				 struct compound_hdr *hdr)
 {
 	encode_getattr_three(xdr,
-			     bitmask[0] & nfs4_fattr_bitmap[0],
-			     bitmask[1] & nfs4_fattr_bitmap[1],
-			     bitmask[2] & FATTR4_WORD2_MDSTHRESHOLD,
+			     bitmask[0] & open_bitmap[0],
+			     bitmask[1] & open_bitmap[1],
+			     bitmask[2] & open_bitmap[2],
 			     hdr);
 }
 
@@ -2221,7 +2222,7 @@
 	encode_putfh(xdr, args->fh, &hdr);
 	encode_open(xdr, args, &hdr);
 	encode_getfh(xdr, &hdr);
-	encode_getfattr_open(xdr, args->bitmask, &hdr);
+	encode_getfattr_open(xdr, args->bitmask, args->open_bitmap, &hdr);
 	encode_nops(&hdr);
 }
 
@@ -4359,7 +4360,10 @@
 
 	if (unlikely(bitmap[2] & (FATTR4_WORD2_MDSTHRESHOLD - 1U)))
 		return -EIO;
-	if (likely(bitmap[2] & FATTR4_WORD2_MDSTHRESHOLD)) {
+	if (bitmap[2] & FATTR4_WORD2_MDSTHRESHOLD) {
+		/* Did the server return an unrequested attribute? */
+		if (unlikely(res == NULL))
+			return -EREMOTEIO;
 		p = xdr_inline_decode(xdr, 4);
 		if (unlikely(!p))
 			goto out_overflow;
@@ -4372,6 +4376,7 @@
 				__func__);
 
 		status = decode_first_threshold_item4(xdr, res);
+		bitmap[2] &= ~FATTR4_WORD2_MDSTHRESHOLD;
 	}
 	return status;
 out_overflow:
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index b8323aa..bbc49ca 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -70,6 +70,10 @@
 
 	spin_lock(&pnfs_spinlock);
 	local = find_pnfs_driver_locked(id);
+	if (local != NULL && !try_module_get(local->owner)) {
+		dprintk("%s: Could not grab reference on module\n", __func__);
+		local = NULL;
+	}
 	spin_unlock(&pnfs_spinlock);
 	return local;
 }
@@ -80,6 +84,9 @@
 	if (nfss->pnfs_curr_ld) {
 		if (nfss->pnfs_curr_ld->clear_layoutdriver)
 			nfss->pnfs_curr_ld->clear_layoutdriver(nfss);
+		/* Decrement the MDS count. Purge the deviceid cache if zero */
+		if (atomic_dec_and_test(&nfss->nfs_client->cl_mds_count))
+			nfs4_deviceid_purge_client(nfss->nfs_client);
 		module_put(nfss->pnfs_curr_ld->owner);
 	}
 	nfss->pnfs_curr_ld = NULL;
@@ -115,10 +122,6 @@
 			goto out_no_driver;
 		}
 	}
-	if (!try_module_get(ld_type->owner)) {
-		dprintk("%s: Could not grab reference on module\n", __func__);
-		goto out_no_driver;
-	}
 	server->pnfs_curr_ld = ld_type;
 	if (ld_type->set_layoutdriver
 	    && ld_type->set_layoutdriver(server, mntfh)) {
@@ -127,6 +130,8 @@
 		module_put(ld_type->owner);
 		goto out_no_driver;
 	}
+	/* Bump the MDS count */
+	atomic_inc(&server->nfs_client->cl_mds_count);
 
 	dprintk("%s: pNFS module for %u set\n", __func__, id);
 	return;
diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h
index 29fd23c..64f90d8 100644
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -365,7 +365,7 @@
 pnfs_use_threshold(struct nfs4_threshold **dst, struct nfs4_threshold *src,
 		   struct nfs_server *nfss)
 {
-	return (dst && src && src->bm != 0 &&
+	return (dst && src && src->bm != 0 && nfss->pnfs_curr_ld &&
 					nfss->pnfs_curr_ld->id == src->l_type);
 }
 
diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c
index a706b6b..617c741 100644
--- a/fs/nfs/proc.c
+++ b/fs/nfs/proc.c
@@ -651,7 +651,7 @@
 		/* Emulate the eof flag, which isn't normally needed in NFSv2
 		 * as it is guaranteed to always return the file attributes
 		 */
-		if (data->args.offset + data->args.count >= data->res.fattr->size)
+		if (data->args.offset + data->res.count >= data->res.fattr->size)
 			data->res.eof = 1;
 	}
 	return 0;
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index ff656c0..906f09c 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1867,6 +1867,7 @@
 	if (data == NULL)
 		goto out_no_data;
 
+	args->version = NFS_DEFAULT_VERSION;
 	switch (data->version) {
 	case 1:
 		data->namlen = 0;
@@ -2637,6 +2638,8 @@
 	if (data == NULL)
 		goto out_no_data;
 
+	args->version = 4;
+
 	switch (data->version) {
 	case 1:
 		if (data->host_addrlen > sizeof(args->nfs_server.address))
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index e6fe3d6..4d6861c 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -80,6 +80,7 @@
 		INIT_LIST_HEAD(&hdr->rpc_list);
 		spin_lock_init(&hdr->lock);
 		atomic_set(&hdr->refcnt, 0);
+		hdr->verf = &p->verf;
 	}
 	return p;
 }
@@ -619,6 +620,7 @@
 			goto next;
 		}
 		if (test_bit(NFS_IOHDR_NEED_COMMIT, &hdr->flags)) {
+			memcpy(&req->wb_verf, hdr->verf, sizeof(req->wb_verf));
 			nfs_mark_request_commit(req, hdr->lseg, &cinfo);
 			goto next;
 		}
@@ -1255,15 +1257,14 @@
 	struct nfs_write_data	*data = calldata;
 	struct nfs_pgio_header *hdr = data->header;
 	int status = data->task.tk_status;
-	struct nfs_page *req = hdr->req;
 
 	if ((status >= 0) && nfs_write_need_commit(data)) {
 		spin_lock(&hdr->lock);
 		if (test_bit(NFS_IOHDR_NEED_RESCHED, &hdr->flags))
 			; /* Do nothing */
 		else if (!test_and_set_bit(NFS_IOHDR_NEED_COMMIT, &hdr->flags))
-			memcpy(&req->wb_verf, &data->verf, sizeof(req->wb_verf));
-		else if (memcmp(&req->wb_verf, &data->verf, sizeof(req->wb_verf)))
+			memcpy(hdr->verf, &data->verf, sizeof(*hdr->verf));
+		else if (memcmp(hdr->verf, &data->verf, sizeof(*hdr->verf)))
 			set_bit(NFS_IOHDR_NEED_RESCHED, &hdr->flags);
 		spin_unlock(&hdr->lock);
 	}
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 8fdc9ec..94effd5 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -900,7 +900,7 @@
 	struct nfsd4_session *ses;
 	int mem;
 
-	BUG_ON(!spin_is_locked(&client_lock));
+	lockdep_assert_held(&client_lock);
 	ses = container_of(kref, struct nfsd4_session, se_ref);
 	nfsd4_del_conns(ses);
 	spin_lock(&nfsd_drc_lock);
@@ -1080,7 +1080,7 @@
 static inline void
 free_client(struct nfs4_client *clp)
 {
-	BUG_ON(!spin_is_locked(&client_lock));
+	lockdep_assert_held(&client_lock);
 	while (!list_empty(&clp->cl_sessions)) {
 		struct nfsd4_session *ses;
 		ses = list_entry(clp->cl_sessions.next, struct nfsd4_session,
diff --git a/fs/nilfs2/gcinode.c b/fs/nilfs2/gcinode.c
index 08a07a2..57ceaf3 100644
--- a/fs/nilfs2/gcinode.c
+++ b/fs/nilfs2/gcinode.c
@@ -191,6 +191,8 @@
 	while (!list_empty(head)) {
 		ii = list_first_entry(head, struct nilfs_inode_info, i_dirty);
 		list_del_init(&ii->i_dirty);
+		truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+		nilfs_btnode_cache_clear(&ii->i_btnode_cache);
 		iput(&ii->vfs_inode);
 	}
 }
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index 0e72ad6..88e11fb 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2309,6 +2309,8 @@
 		if (!test_bit(NILFS_I_UPDATED, &ii->i_state))
 			continue;
 		list_del_init(&ii->i_dirty);
+		truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+		nilfs_btnode_cache_clear(&ii->i_btnode_cache);
 		iput(&ii->vfs_inode);
 	}
 }
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 81a4cd2..4f7795f 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -456,7 +456,7 @@
 	stats->ls_gets++;
 	stats->ls_total += ktime_to_ns(kt);
 	/* overflow */
-	if (unlikely(stats->ls_gets) == 0) {
+	if (unlikely(stats->ls_gets == 0)) {
 		stats->ls_gets++;
 		stats->ls_total = ktime_to_ns(kt);
 	}
@@ -3932,6 +3932,8 @@
 static void ocfs2_schedule_blocked_lock(struct ocfs2_super *osb,
 					struct ocfs2_lock_res *lockres)
 {
+	unsigned long flags;
+
 	assert_spin_locked(&lockres->l_lock);
 
 	if (lockres->l_flags & OCFS2_LOCK_FREEING) {
@@ -3945,21 +3947,22 @@
 
 	lockres_or_flags(lockres, OCFS2_LOCK_QUEUED);
 
-	spin_lock(&osb->dc_task_lock);
+	spin_lock_irqsave(&osb->dc_task_lock, flags);
 	if (list_empty(&lockres->l_blocked_list)) {
 		list_add_tail(&lockres->l_blocked_list,
 			      &osb->blocked_lock_list);
 		osb->blocked_lock_count++;
 	}
-	spin_unlock(&osb->dc_task_lock);
+	spin_unlock_irqrestore(&osb->dc_task_lock, flags);
 }
 
 static void ocfs2_downconvert_thread_do_work(struct ocfs2_super *osb)
 {
 	unsigned long processed;
+	unsigned long flags;
 	struct ocfs2_lock_res *lockres;
 
-	spin_lock(&osb->dc_task_lock);
+	spin_lock_irqsave(&osb->dc_task_lock, flags);
 	/* grab this early so we know to try again if a state change and
 	 * wake happens part-way through our work  */
 	osb->dc_work_sequence = osb->dc_wake_sequence;
@@ -3972,38 +3975,40 @@
 				     struct ocfs2_lock_res, l_blocked_list);
 		list_del_init(&lockres->l_blocked_list);
 		osb->blocked_lock_count--;
-		spin_unlock(&osb->dc_task_lock);
+		spin_unlock_irqrestore(&osb->dc_task_lock, flags);
 
 		BUG_ON(!processed);
 		processed--;
 
 		ocfs2_process_blocked_lock(osb, lockres);
 
-		spin_lock(&osb->dc_task_lock);
+		spin_lock_irqsave(&osb->dc_task_lock, flags);
 	}
-	spin_unlock(&osb->dc_task_lock);
+	spin_unlock_irqrestore(&osb->dc_task_lock, flags);
 }
 
 static int ocfs2_downconvert_thread_lists_empty(struct ocfs2_super *osb)
 {
 	int empty = 0;
+	unsigned long flags;
 
-	spin_lock(&osb->dc_task_lock);
+	spin_lock_irqsave(&osb->dc_task_lock, flags);
 	if (list_empty(&osb->blocked_lock_list))
 		empty = 1;
 
-	spin_unlock(&osb->dc_task_lock);
+	spin_unlock_irqrestore(&osb->dc_task_lock, flags);
 	return empty;
 }
 
 static int ocfs2_downconvert_thread_should_wake(struct ocfs2_super *osb)
 {
 	int should_wake = 0;
+	unsigned long flags;
 
-	spin_lock(&osb->dc_task_lock);
+	spin_lock_irqsave(&osb->dc_task_lock, flags);
 	if (osb->dc_work_sequence != osb->dc_wake_sequence)
 		should_wake = 1;
-	spin_unlock(&osb->dc_task_lock);
+	spin_unlock_irqrestore(&osb->dc_task_lock, flags);
 
 	return should_wake;
 }
@@ -4033,10 +4038,12 @@
 
 void ocfs2_wake_downconvert_thread(struct ocfs2_super *osb)
 {
-	spin_lock(&osb->dc_task_lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&osb->dc_task_lock, flags);
 	/* make sure the voting thread gets a swipe at whatever changes
 	 * the caller may have made to the voting state */
 	osb->dc_wake_sequence++;
-	spin_unlock(&osb->dc_task_lock);
+	spin_unlock_irqrestore(&osb->dc_task_lock, flags);
 	wake_up(&osb->dc_event);
 }
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index 2f5b92e..70b5863 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -923,8 +923,6 @@
 
 	ocfs2_inode_unlock(inode, 0);
 out:
-	if (ret && ret != -ENXIO)
-		ret = -ENXIO;
 	return ret;
 }
 
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 061591a..98513c8 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2422,8 +2422,10 @@
 		unaligned_dio = 0;
 	}
 
-	if (unaligned_dio)
+	if (unaligned_dio) {
+		ocfs2_iocb_clear_unaligned_aio(iocb);
 		atomic_dec(&OCFS2_I(inode)->ip_unaligned_aio);
+	}
 
 out:
 	if (rw_level != -1)
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 92fcd575..0a86e30 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -399,8 +399,6 @@
 			      msecs_to_jiffies(oinfo->dqi_syncms));
 
 out_err:
-	if (status)
-		mlog_errno(status);
 	return status;
 out_unlock:
 	ocfs2_unlock_global_qf(oinfo, 0);
diff --git a/fs/open.c b/fs/open.c
index d6c79a0..1540632 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -397,10 +397,10 @@
 {
 	struct file *file;
 	struct inode *inode;
-	int error;
+	int error, fput_needed;
 
 	error = -EBADF;
-	file = fget(fd);
+	file = fget_raw_light(fd, &fput_needed);
 	if (!file)
 		goto out;
 
@@ -414,7 +414,7 @@
 	if (!error)
 		set_fs_pwd(current->fs, &file->f_path);
 out_putf:
-	fput(file);
+	fput_light(file, fput_needed);
 out:
 	return error;
 }
diff --git a/fs/pstore/inode.c b/fs/pstore/inode.c
index aeb19e6..11a2aa2 100644
--- a/fs/pstore/inode.c
+++ b/fs/pstore/inode.c
@@ -258,7 +258,7 @@
 	return rc;
 }
 
-int pstore_fill_super(struct super_block *sb, void *data, int silent)
+static int pstore_fill_super(struct super_block *sb, void *data, int silent)
 {
 	struct inode *inode;
 
diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index 82c585f..03ce7a9 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -94,20 +94,15 @@
  * as we can from the end of the buffer.
  */
 static void pstore_dump(struct kmsg_dumper *dumper,
-	    enum kmsg_dump_reason reason,
-	    const char *s1, unsigned long l1,
-	    const char *s2, unsigned long l2)
+			enum kmsg_dump_reason reason)
 {
-	unsigned long	s1_start, s2_start;
-	unsigned long	l1_cpy, l2_cpy;
-	unsigned long	size, total = 0;
-	char		*dst;
+	unsigned long	total = 0;
 	const char	*why;
 	u64		id;
-	int		hsize, ret;
 	unsigned int	part = 1;
 	unsigned long	flags = 0;
 	int		is_locked = 0;
+	int		ret;
 
 	why = get_reason_str(reason);
 
@@ -119,30 +114,25 @@
 		spin_lock_irqsave(&psinfo->buf_lock, flags);
 	oopscount++;
 	while (total < kmsg_bytes) {
+		char *dst;
+		unsigned long size;
+		int hsize;
+		size_t len;
+
 		dst = psinfo->buf;
 		hsize = sprintf(dst, "%s#%d Part%d\n", why, oopscount, part);
 		size = psinfo->bufsize - hsize;
 		dst += hsize;
 
-		l2_cpy = min(l2, size);
-		l1_cpy = min(l1, size - l2_cpy);
-
-		if (l1_cpy + l2_cpy == 0)
+		if (!kmsg_dump_get_buffer(dumper, true, dst, size, &len))
 			break;
 
-		s2_start = l2 - l2_cpy;
-		s1_start = l1 - l1_cpy;
-
-		memcpy(dst, s1 + s1_start, l1_cpy);
-		memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
-
 		ret = psinfo->write(PSTORE_TYPE_DMESG, reason, &id, part,
-				   hsize + l1_cpy + l2_cpy, psinfo);
+				    hsize + len, psinfo);
 		if (ret == 0 && reason == KMSG_DUMP_OOPS && pstore_is_mounted())
 			pstore_new_entry = 1;
-		l1 -= l1_cpy;
-		l2 -= l2_cpy;
-		total += l1_cpy + l2_cpy;
+
+		total += hsize + len;
 		part++;
 	}
 	if (in_nmi()) {
diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c
index 9123cce..453030f 100644
--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -106,6 +106,8 @@
 	time->tv_sec = 0;
 	time->tv_nsec = 0;
 
+	/* Update old/shadowed buffer. */
+	persistent_ram_save_old(prz);
 	size = persistent_ram_old_size(prz);
 	*buf = kmalloc(size, GFP_KERNEL);
 	if (*buf == NULL)
@@ -184,6 +186,7 @@
 		return -EINVAL;
 
 	persistent_ram_free_old(cxt->przs[id]);
+	persistent_ram_zap(cxt->przs[id]);
 
 	return 0;
 }
diff --git a/fs/pstore/ram_core.c b/fs/pstore/ram_core.c
index 31f8d18..c5fbdbb 100644
--- a/fs/pstore/ram_core.c
+++ b/fs/pstore/ram_core.c
@@ -250,23 +250,24 @@
 	persistent_ram_update_ecc(prz, start, count);
 }
 
-static void __init
-persistent_ram_save_old(struct persistent_ram_zone *prz)
+void persistent_ram_save_old(struct persistent_ram_zone *prz)
 {
 	struct persistent_ram_buffer *buffer = prz->buffer;
 	size_t size = buffer_size(prz);
 	size_t start = buffer_start(prz);
-	char *dest;
 
-	persistent_ram_ecc_old(prz);
+	if (!size)
+		return;
 
-	dest = kmalloc(size, GFP_KERNEL);
-	if (dest == NULL) {
+	if (!prz->old_log) {
+		persistent_ram_ecc_old(prz);
+		prz->old_log = kmalloc(size, GFP_KERNEL);
+	}
+	if (!prz->old_log) {
 		pr_err("persistent_ram: failed to allocate buffer\n");
 		return;
 	}
 
-	prz->old_log = dest;
 	prz->old_log_size = size;
 	memcpy(prz->old_log, &buffer->data[start], size - start);
 	memcpy(prz->old_log + size - start, &buffer->data[0], start);
@@ -319,6 +320,13 @@
 	prz->old_log_size = 0;
 }
 
+void persistent_ram_zap(struct persistent_ram_zone *prz)
+{
+	atomic_set(&prz->buffer->start, 0);
+	atomic_set(&prz->buffer->size, 0);
+	persistent_ram_update_header_ecc(prz);
+}
+
 static void *persistent_ram_vmap(phys_addr_t start, size_t size)
 {
 	struct page **pages;
@@ -405,6 +413,7 @@
 				" size %zu, start %zu\n",
 			       buffer_size(prz), buffer_start(prz));
 			persistent_ram_save_old(prz);
+			return 0;
 		}
 	} else {
 		pr_info("persistent_ram: no valid data in buffer"
@@ -412,8 +421,7 @@
 	}
 
 	prz->buffer->sig = PERSISTENT_RAM_SIG;
-	atomic_set(&prz->buffer->start, 0);
-	atomic_set(&prz->buffer->size, 0);
+	persistent_ram_zap(prz);
 
 	return 0;
 }
@@ -448,7 +456,6 @@
 		goto err;
 
 	persistent_ram_post_init(prz, ecc);
-	persistent_ram_update_header_ecc(prz);
 
 	return prz;
 err:
diff --git a/fs/splice.c b/fs/splice.c
index c9f1318..7bf08fa 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -273,13 +273,16 @@
  * Check if we need to grow the arrays holding pages and partial page
  * descriptions.
  */
-int splice_grow_spd(struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
+int splice_grow_spd(const struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
 {
-	if (pipe->buffers <= PIPE_DEF_BUFFERS)
+	unsigned int buffers = ACCESS_ONCE(pipe->buffers);
+
+	spd->nr_pages_max = buffers;
+	if (buffers <= PIPE_DEF_BUFFERS)
 		return 0;
 
-	spd->pages = kmalloc(pipe->buffers * sizeof(struct page *), GFP_KERNEL);
-	spd->partial = kmalloc(pipe->buffers * sizeof(struct partial_page), GFP_KERNEL);
+	spd->pages = kmalloc(buffers * sizeof(struct page *), GFP_KERNEL);
+	spd->partial = kmalloc(buffers * sizeof(struct partial_page), GFP_KERNEL);
 
 	if (spd->pages && spd->partial)
 		return 0;
@@ -289,10 +292,9 @@
 	return -ENOMEM;
 }
 
-void splice_shrink_spd(struct pipe_inode_info *pipe,
-		       struct splice_pipe_desc *spd)
+void splice_shrink_spd(struct splice_pipe_desc *spd)
 {
-	if (pipe->buffers <= PIPE_DEF_BUFFERS)
+	if (spd->nr_pages_max <= PIPE_DEF_BUFFERS)
 		return;
 
 	kfree(spd->pages);
@@ -315,6 +317,7 @@
 	struct splice_pipe_desc spd = {
 		.pages = pages,
 		.partial = partial,
+		.nr_pages_max = PIPE_DEF_BUFFERS,
 		.flags = flags,
 		.ops = &page_cache_pipe_buf_ops,
 		.spd_release = spd_release_page,
@@ -326,7 +329,7 @@
 	index = *ppos >> PAGE_CACHE_SHIFT;
 	loff = *ppos & ~PAGE_CACHE_MASK;
 	req_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
-	nr_pages = min(req_pages, pipe->buffers);
+	nr_pages = min(req_pages, spd.nr_pages_max);
 
 	/*
 	 * Lookup the (hopefully) full range of pages we need.
@@ -497,7 +500,7 @@
 	if (spd.nr_pages)
 		error = splice_to_pipe(pipe, &spd);
 
-	splice_shrink_spd(pipe, &spd);
+	splice_shrink_spd(&spd);
 	return error;
 }
 
@@ -598,6 +601,7 @@
 	struct splice_pipe_desc spd = {
 		.pages = pages,
 		.partial = partial,
+		.nr_pages_max = PIPE_DEF_BUFFERS,
 		.flags = flags,
 		.ops = &default_pipe_buf_ops,
 		.spd_release = spd_release_page,
@@ -608,8 +612,8 @@
 
 	res = -ENOMEM;
 	vec = __vec;
-	if (pipe->buffers > PIPE_DEF_BUFFERS) {
-		vec = kmalloc(pipe->buffers * sizeof(struct iovec), GFP_KERNEL);
+	if (spd.nr_pages_max > PIPE_DEF_BUFFERS) {
+		vec = kmalloc(spd.nr_pages_max * sizeof(struct iovec), GFP_KERNEL);
 		if (!vec)
 			goto shrink_ret;
 	}
@@ -617,7 +621,7 @@
 	offset = *ppos & ~PAGE_CACHE_MASK;
 	nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
 
-	for (i = 0; i < nr_pages && i < pipe->buffers && len; i++) {
+	for (i = 0; i < nr_pages && i < spd.nr_pages_max && len; i++) {
 		struct page *page;
 
 		page = alloc_page(GFP_USER);
@@ -665,7 +669,7 @@
 shrink_ret:
 	if (vec != __vec)
 		kfree(vec);
-	splice_shrink_spd(pipe, &spd);
+	splice_shrink_spd(&spd);
 	return res;
 
 err:
@@ -1614,6 +1618,7 @@
 	struct splice_pipe_desc spd = {
 		.pages = pages,
 		.partial = partial,
+		.nr_pages_max = PIPE_DEF_BUFFERS,
 		.flags = flags,
 		.ops = &user_page_pipe_buf_ops,
 		.spd_release = spd_release_page,
@@ -1629,13 +1634,13 @@
 
 	spd.nr_pages = get_iovec_page_array(iov, nr_segs, spd.pages,
 					    spd.partial, false,
-					    pipe->buffers);
+					    spd.nr_pages_max);
 	if (spd.nr_pages <= 0)
 		ret = spd.nr_pages;
 	else
 		ret = splice_to_pipe(pipe, &spd);
 
-	splice_shrink_spd(pipe, &spd);
+	splice_shrink_spd(&spd);
 	return ret;
 }
 
diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c
index 84a7e6f..92df3b0 100644
--- a/fs/ubifs/debug.c
+++ b/fs/ubifs/debug.c
@@ -2918,7 +2918,7 @@
 	struct dentry *dent;
 	struct ubifs_debug_info *d = c->dbg;
 
-	if (!IS_ENABLED(DEBUG_FS))
+	if (!IS_ENABLED(CONFIG_DEBUG_FS))
 		return 0;
 
 	n = snprintf(d->dfs_dir_name, UBIFS_DFS_DIR_LEN + 1, UBIFS_DFS_DIR_NAME,
@@ -3013,7 +3013,7 @@
  */
 void dbg_debugfs_exit_fs(struct ubifs_info *c)
 {
-	if (IS_ENABLED(DEBUG_FS))
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
 		debugfs_remove_recursive(c->dbg->dfs_dir);
 }
 
@@ -3099,7 +3099,7 @@
 	const char *fname;
 	struct dentry *dent;
 
-	if (!IS_ENABLED(DEBUG_FS))
+	if (!IS_ENABLED(CONFIG_DEBUG_FS))
 		return 0;
 
 	fname = "ubifs";
@@ -3166,7 +3166,7 @@
  */
 void dbg_debugfs_exit(void)
 {
-	if (IS_ENABLED(DEBUG_FS))
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
 		debugfs_remove_recursive(dfs_rootdir);
 }
 
diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c
index 2559d17..28ec13a 100644
--- a/fs/ubifs/find.c
+++ b/fs/ubifs/find.c
@@ -939,8 +939,8 @@
 	}
 	dbg_find("LEB %d, dirty %d and free %d flags %#x", lp->lnum, lp->dirty,
 		 lp->free, lp->flags);
-	ubifs_assert(lp->flags | LPROPS_TAKEN);
-	ubifs_assert(lp->flags | LPROPS_INDEX);
+	ubifs_assert(lp->flags & LPROPS_TAKEN);
+	ubifs_assert(lp->flags & LPROPS_INDEX);
 	return lnum;
 }
 
diff --git a/fs/udf/super.c b/fs/udf/super.c
index ac8a348..8d86a87 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -56,6 +56,7 @@
 #include <linux/seq_file.h>
 #include <linux/bitmap.h>
 #include <linux/crc-itu-t.h>
+#include <linux/log2.h>
 #include <asm/byteorder.h>
 
 #include "udf_sb.h"
@@ -1215,16 +1216,65 @@
 	return ret;
 }
 
+static int udf_load_sparable_map(struct super_block *sb,
+				 struct udf_part_map *map,
+				 struct sparablePartitionMap *spm)
+{
+	uint32_t loc;
+	uint16_t ident;
+	struct sparingTable *st;
+	struct udf_sparing_data *sdata = &map->s_type_specific.s_sparing;
+	int i;
+	struct buffer_head *bh;
+
+	map->s_partition_type = UDF_SPARABLE_MAP15;
+	sdata->s_packet_len = le16_to_cpu(spm->packetLength);
+	if (!is_power_of_2(sdata->s_packet_len)) {
+		udf_err(sb, "error loading logical volume descriptor: "
+			"Invalid packet length %u\n",
+			(unsigned)sdata->s_packet_len);
+		return -EIO;
+	}
+	if (spm->numSparingTables > 4) {
+		udf_err(sb, "error loading logical volume descriptor: "
+			"Too many sparing tables (%d)\n",
+			(int)spm->numSparingTables);
+		return -EIO;
+	}
+
+	for (i = 0; i < spm->numSparingTables; i++) {
+		loc = le32_to_cpu(spm->locSparingTable[i]);
+		bh = udf_read_tagged(sb, loc, loc, &ident);
+		if (!bh)
+			continue;
+
+		st = (struct sparingTable *)bh->b_data;
+		if (ident != 0 ||
+		    strncmp(st->sparingIdent.ident, UDF_ID_SPARING,
+			    strlen(UDF_ID_SPARING)) ||
+		    sizeof(*st) + le16_to_cpu(st->reallocationTableLen) >
+							sb->s_blocksize) {
+			brelse(bh);
+			continue;
+		}
+
+		sdata->s_spar_map[i] = bh;
+	}
+	map->s_partition_func = udf_get_pblock_spar15;
+	return 0;
+}
+
 static int udf_load_logicalvol(struct super_block *sb, sector_t block,
 			       struct kernel_lb_addr *fileset)
 {
 	struct logicalVolDesc *lvd;
-	int i, j, offset;
+	int i, offset;
 	uint8_t type;
 	struct udf_sb_info *sbi = UDF_SB(sb);
 	struct genericPartitionMap *gpm;
 	uint16_t ident;
 	struct buffer_head *bh;
+	unsigned int table_len;
 	int ret = 0;
 
 	bh = udf_read_tagged(sb, block, block, &ident);
@@ -1232,15 +1282,20 @@
 		return 1;
 	BUG_ON(ident != TAG_IDENT_LVD);
 	lvd = (struct logicalVolDesc *)bh->b_data;
-
-	i = udf_sb_alloc_partition_maps(sb, le32_to_cpu(lvd->numPartitionMaps));
-	if (i != 0) {
-		ret = i;
+	table_len = le32_to_cpu(lvd->mapTableLength);
+	if (sizeof(*lvd) + table_len > sb->s_blocksize) {
+		udf_err(sb, "error loading logical volume descriptor: "
+			"Partition table too long (%u > %lu)\n", table_len,
+			sb->s_blocksize - sizeof(*lvd));
 		goto out_bh;
 	}
 
+	ret = udf_sb_alloc_partition_maps(sb, le32_to_cpu(lvd->numPartitionMaps));
+	if (ret)
+		goto out_bh;
+
 	for (i = 0, offset = 0;
-	     i < sbi->s_partitions && offset < le32_to_cpu(lvd->mapTableLength);
+	     i < sbi->s_partitions && offset < table_len;
 	     i++, offset += gpm->partitionMapLength) {
 		struct udf_part_map *map = &sbi->s_partmaps[i];
 		gpm = (struct genericPartitionMap *)
@@ -1275,38 +1330,9 @@
 			} else if (!strncmp(upm2->partIdent.ident,
 						UDF_ID_SPARABLE,
 						strlen(UDF_ID_SPARABLE))) {
-				uint32_t loc;
-				struct sparingTable *st;
-				struct sparablePartitionMap *spm =
-					(struct sparablePartitionMap *)gpm;
-
-				map->s_partition_type = UDF_SPARABLE_MAP15;
-				map->s_type_specific.s_sparing.s_packet_len =
-						le16_to_cpu(spm->packetLength);
-				for (j = 0; j < spm->numSparingTables; j++) {
-					struct buffer_head *bh2;
-
-					loc = le32_to_cpu(
-						spm->locSparingTable[j]);
-					bh2 = udf_read_tagged(sb, loc, loc,
-							     &ident);
-					map->s_type_specific.s_sparing.
-							s_spar_map[j] = bh2;
-
-					if (bh2 == NULL)
-						continue;
-
-					st = (struct sparingTable *)bh2->b_data;
-					if (ident != 0 || strncmp(
-						st->sparingIdent.ident,
-						UDF_ID_SPARING,
-						strlen(UDF_ID_SPARING))) {
-						brelse(bh2);
-						map->s_type_specific.s_sparing.
-							s_spar_map[j] = NULL;
-					}
-				}
-				map->s_partition_func = udf_get_pblock_spar15;
+				if (udf_load_sparable_map(sb, map,
+				    (struct sparablePartitionMap *)gpm) < 0)
+					goto out_bh;
 			} else if (!strncmp(upm2->partIdent.ident,
 						UDF_ID_METADATA,
 						strlen(UDF_ID_METADATA))) {
diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c
index 229641f..9d1aeb7 100644
--- a/fs/xfs/xfs_alloc.c
+++ b/fs/xfs/xfs_alloc.c
@@ -1080,6 +1080,7 @@
 			goto restart;
 		}
 
+		xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
 		trace_xfs_alloc_size_neither(args);
 		args->agbno = NULLAGBLOCK;
 		return 0;
@@ -2441,7 +2442,7 @@
 	DECLARE_COMPLETION_ONSTACK(done);
 
 	args->done = &done;
-	INIT_WORK(&args->work, xfs_alloc_vextent_worker);
+	INIT_WORK_ONSTACK(&args->work, xfs_alloc_vextent_worker);
 	queue_work(xfs_alloc_wq, &args->work);
 	wait_for_completion(&done);
 	return args->result;
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index ae31c31..8dad722 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -981,10 +981,15 @@
 				imap_valid = 0;
 			}
 		} else {
-			if (PageUptodate(page)) {
+			if (PageUptodate(page))
 				ASSERT(buffer_mapped(bh));
-				imap_valid = 0;
-			}
+			/*
+			 * This buffer is not uptodate and will not be
+			 * written to disk.  Ensure that we will put any
+			 * subsequent writeable buffers into a new
+			 * ioend.
+			 */
+			imap_valid = 0;
 			continue;
 		}
 
diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index 172d3cc..a4beb42 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -201,14 +201,7 @@
 	bp->b_length = numblks;
 	bp->b_io_length = numblks;
 	bp->b_flags = flags;
-
-	/*
-	 * We do not set the block number here in the buffer because we have not
-	 * finished initialising the buffer. We insert the buffer into the cache
-	 * in this state, so this ensures that we are unable to do IO on a
-	 * buffer that hasn't been fully initialised.
-	 */
-	bp->b_bn = XFS_BUF_DADDR_NULL;
+	bp->b_bn = blkno;
 	atomic_set(&bp->b_pin_count, 0);
 	init_waitqueue_head(&bp->b_waiters);
 
@@ -567,11 +560,6 @@
 	if (bp != new_bp)
 		xfs_buf_free(new_bp);
 
-	/*
-	 * Now we have a workable buffer, fill in the block number so
-	 * that we can do IO on it.
-	 */
-	bp->b_bn = blkno;
 	bp->b_io_length = bp->b_length;
 
 found:
@@ -772,7 +760,7 @@
 	int			error, i;
 	xfs_buf_t		*bp;
 
-	bp = xfs_buf_alloc(target, 0, numblks, 0);
+	bp = xfs_buf_alloc(target, XFS_BUF_DADDR_NULL, numblks, 0);
 	if (unlikely(bp == NULL))
 		goto fail;
 
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 6cdbf90c..d041d47 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -505,6 +505,14 @@
 	}
 
 	/*
+	 * Stale inode items should force out the iclog.
+	 */
+	if (ip->i_flags & XFS_ISTALE) {
+		rval = XFS_ITEM_PINNED;
+		goto out_unlock;
+	}
+
+	/*
 	 * Someone else is already flushing the inode.  Nothing we can do
 	 * here but wait for the flush to finish and remove the item from
 	 * the AIL.
@@ -514,15 +522,6 @@
 		goto out_unlock;
 	}
 
-	/*
-	 * Stale inode items should force out the iclog.
-	 */
-	if (ip->i_flags & XFS_ISTALE) {
-		xfs_ifunlock(ip);
-		xfs_iunlock(ip, XFS_ILOCK_SHARED);
-		return XFS_ITEM_PINNED;
-	}
-
 	ASSERT(iip->ili_fields != 0 || XFS_FORCED_SHUTDOWN(ip->i_mount));
 	ASSERT(iip->ili_logged == 0 || XFS_FORCED_SHUTDOWN(ip->i_mount));
 
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index f30d980..d90d4a3 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -38,13 +38,21 @@
 kmem_zone_t	*xfs_log_ticket_zone;
 
 /* Local miscellaneous function prototypes */
-STATIC int	 xlog_commit_record(struct log *log, struct xlog_ticket *ticket,
-				    xlog_in_core_t **, xfs_lsn_t *);
+STATIC int
+xlog_commit_record(
+	struct xlog		*log,
+	struct xlog_ticket	*ticket,
+	struct xlog_in_core	**iclog,
+	xfs_lsn_t		*commitlsnp);
+
 STATIC xlog_t *  xlog_alloc_log(xfs_mount_t	*mp,
 				xfs_buftarg_t	*log_target,
 				xfs_daddr_t	blk_offset,
 				int		num_bblks);
-STATIC int	 xlog_space_left(struct log *log, atomic64_t *head);
+STATIC int
+xlog_space_left(
+	struct xlog		*log,
+	atomic64_t		*head);
 STATIC int	 xlog_sync(xlog_t *log, xlog_in_core_t *iclog);
 STATIC void	 xlog_dealloc_log(xlog_t *log);
 
@@ -64,8 +72,10 @@
 				     int		eventual_size);
 STATIC void xlog_state_want_sync(xlog_t	*log, xlog_in_core_t *iclog);
 
-STATIC void xlog_grant_push_ail(struct log	*log,
-				int		need_bytes);
+STATIC void
+xlog_grant_push_ail(
+	struct xlog	*log,
+	int		need_bytes);
 STATIC void xlog_regrant_reserve_log_space(xlog_t	 *log,
 					   xlog_ticket_t *ticket);
 STATIC void xlog_ungrant_log_space(xlog_t	 *log,
@@ -73,7 +83,9 @@
 
 #if defined(DEBUG)
 STATIC void	xlog_verify_dest_ptr(xlog_t *log, char *ptr);
-STATIC void	xlog_verify_grant_tail(struct log *log);
+STATIC void
+xlog_verify_grant_tail(
+	struct xlog	*log);
 STATIC void	xlog_verify_iclog(xlog_t *log, xlog_in_core_t *iclog,
 				  int count, boolean_t syncing);
 STATIC void	xlog_verify_tail_lsn(xlog_t *log, xlog_in_core_t *iclog,
@@ -89,9 +101,9 @@
 
 static void
 xlog_grant_sub_space(
-	struct log	*log,
-	atomic64_t	*head,
-	int		bytes)
+	struct xlog		*log,
+	atomic64_t		*head,
+	int			bytes)
 {
 	int64_t	head_val = atomic64_read(head);
 	int64_t new, old;
@@ -115,9 +127,9 @@
 
 static void
 xlog_grant_add_space(
-	struct log	*log,
-	atomic64_t	*head,
-	int		bytes)
+	struct xlog		*log,
+	atomic64_t		*head,
+	int			bytes)
 {
 	int64_t	head_val = atomic64_read(head);
 	int64_t new, old;
@@ -165,7 +177,7 @@
 
 static inline int
 xlog_ticket_reservation(
-	struct log		*log,
+	struct xlog		*log,
 	struct xlog_grant_head	*head,
 	struct xlog_ticket	*tic)
 {
@@ -182,7 +194,7 @@
 
 STATIC bool
 xlog_grant_head_wake(
-	struct log		*log,
+	struct xlog		*log,
 	struct xlog_grant_head	*head,
 	int			*free_bytes)
 {
@@ -204,7 +216,7 @@
 
 STATIC int
 xlog_grant_head_wait(
-	struct log		*log,
+	struct xlog		*log,
 	struct xlog_grant_head	*head,
 	struct xlog_ticket	*tic,
 	int			need_bytes)
@@ -256,7 +268,7 @@
  */
 STATIC int
 xlog_grant_head_check(
-	struct log		*log,
+	struct xlog		*log,
 	struct xlog_grant_head	*head,
 	struct xlog_ticket	*tic,
 	int			*need_bytes)
@@ -323,7 +335,7 @@
 	struct xfs_mount	*mp,
 	struct xlog_ticket	*tic)
 {
-	struct log		*log = mp->m_log;
+	struct xlog		*log = mp->m_log;
 	int			need_bytes;
 	int			error = 0;
 
@@ -389,7 +401,7 @@
 	bool			permanent,
 	uint		 	t_type)
 {
-	struct log		*log = mp->m_log;
+	struct xlog		*log = mp->m_log;
 	struct xlog_ticket	*tic;
 	int			need_bytes;
 	int			error = 0;
@@ -465,7 +477,7 @@
 	struct xlog_in_core	**iclog,
 	uint			flags)
 {
-	struct log		*log = mp->m_log;
+	struct xlog		*log = mp->m_log;
 	xfs_lsn_t		lsn = 0;
 
 	if (XLOG_FORCED_SHUTDOWN(log) ||
@@ -810,6 +822,7 @@
 void
 xfs_log_unmount(xfs_mount_t *mp)
 {
+	cancel_delayed_work_sync(&mp->m_sync_work);
 	xfs_trans_ail_destroy(mp);
 	xlog_dealloc_log(mp->m_log);
 }
@@ -838,7 +851,7 @@
 xfs_log_space_wake(
 	struct xfs_mount	*mp)
 {
-	struct log		*log = mp->m_log;
+	struct xlog		*log = mp->m_log;
 	int			free_bytes;
 
 	if (XLOG_FORCED_SHUTDOWN(log))
@@ -916,7 +929,7 @@
 xlog_assign_tail_lsn_locked(
 	struct xfs_mount	*mp)
 {
-	struct log		*log = mp->m_log;
+	struct xlog		*log = mp->m_log;
 	struct xfs_log_item	*lip;
 	xfs_lsn_t		tail_lsn;
 
@@ -965,7 +978,7 @@
  */
 STATIC int
 xlog_space_left(
-	struct log	*log,
+	struct xlog	*log,
 	atomic64_t	*head)
 {
 	int		free_bytes;
@@ -1277,7 +1290,7 @@
  */
 STATIC int
 xlog_commit_record(
-	struct log		*log,
+	struct xlog		*log,
 	struct xlog_ticket	*ticket,
 	struct xlog_in_core	**iclog,
 	xfs_lsn_t		*commitlsnp)
@@ -1311,7 +1324,7 @@
  */
 STATIC void
 xlog_grant_push_ail(
-	struct log	*log,
+	struct xlog	*log,
 	int		need_bytes)
 {
 	xfs_lsn_t	threshold_lsn = 0;
@@ -1790,7 +1803,7 @@
 
 static xlog_op_header_t *
 xlog_write_setup_ophdr(
-	struct log		*log,
+	struct xlog		*log,
 	struct xlog_op_header	*ophdr,
 	struct xlog_ticket	*ticket,
 	uint			flags)
@@ -1873,7 +1886,7 @@
 
 static int
 xlog_write_copy_finish(
-	struct log		*log,
+	struct xlog		*log,
 	struct xlog_in_core	*iclog,
 	uint			flags,
 	int			*record_cnt,
@@ -1958,7 +1971,7 @@
  */
 int
 xlog_write(
-	struct log		*log,
+	struct xlog		*log,
 	struct xfs_log_vec	*log_vector,
 	struct xlog_ticket	*ticket,
 	xfs_lsn_t		*start_lsn,
@@ -2821,7 +2834,7 @@
 	uint			flags,
 	int			*log_flushed)
 {
-	struct log		*log = mp->m_log;
+	struct xlog		*log = mp->m_log;
 	struct xlog_in_core	*iclog;
 	xfs_lsn_t		lsn;
 
@@ -2969,7 +2982,7 @@
 	uint			flags,
 	int			*log_flushed)
 {
-	struct log		*log = mp->m_log;
+	struct xlog		*log = mp->m_log;
 	struct xlog_in_core	*iclog;
 	int			already_slept = 0;
 
@@ -3147,7 +3160,7 @@
  */
 xlog_ticket_t *
 xlog_ticket_alloc(
-	struct log	*log,
+	struct xlog	*log,
 	int		unit_bytes,
 	int		cnt,
 	char		client,
@@ -3278,7 +3291,7 @@
  */
 void
 xlog_verify_dest_ptr(
-	struct log	*log,
+	struct xlog	*log,
 	char		*ptr)
 {
 	int i;
@@ -3307,7 +3320,7 @@
  */
 STATIC void
 xlog_verify_grant_tail(
-	struct log	*log)
+	struct xlog	*log)
 {
 	int		tail_cycle, tail_blocks;
 	int		cycle, space;
diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c
index 7d6197c..ddc4529 100644
--- a/fs/xfs/xfs_log_cil.c
+++ b/fs/xfs/xfs_log_cil.c
@@ -44,7 +44,7 @@
  */
 static struct xlog_ticket *
 xlog_cil_ticket_alloc(
-	struct log	*log)
+	struct xlog	*log)
 {
 	struct xlog_ticket *tic;
 
@@ -72,7 +72,7 @@
  */
 void
 xlog_cil_init_post_recovery(
-	struct log	*log)
+	struct xlog	*log)
 {
 	log->l_cilp->xc_ctx->ticket = xlog_cil_ticket_alloc(log);
 	log->l_cilp->xc_ctx->sequence = 1;
@@ -182,7 +182,7 @@
  */
 STATIC void
 xfs_cil_prepare_item(
-	struct log		*log,
+	struct xlog		*log,
 	struct xfs_log_vec	*lv,
 	int			*len,
 	int			*diff_iovecs)
@@ -231,7 +231,7 @@
  */
 static void
 xlog_cil_insert_items(
-	struct log		*log,
+	struct xlog		*log,
 	struct xfs_log_vec	*log_vector,
 	struct xlog_ticket	*ticket)
 {
@@ -373,7 +373,7 @@
  */
 STATIC int
 xlog_cil_push(
-	struct log		*log)
+	struct xlog		*log)
 {
 	struct xfs_cil		*cil = log->l_cilp;
 	struct xfs_log_vec	*lv;
@@ -601,7 +601,7 @@
  */
 static void
 xlog_cil_push_background(
-	struct log	*log)
+	struct xlog	*log)
 {
 	struct xfs_cil	*cil = log->l_cilp;
 
@@ -629,7 +629,7 @@
 
 static void
 xlog_cil_push_foreground(
-	struct log	*log,
+	struct xlog	*log,
 	xfs_lsn_t	push_seq)
 {
 	struct xfs_cil	*cil = log->l_cilp;
@@ -683,7 +683,7 @@
 	xfs_lsn_t		*commit_lsn,
 	int			flags)
 {
-	struct log		*log = mp->m_log;
+	struct xlog		*log = mp->m_log;
 	int			log_flags = 0;
 	struct xfs_log_vec	*log_vector;
 
@@ -754,7 +754,7 @@
  */
 xfs_lsn_t
 xlog_cil_force_lsn(
-	struct log	*log,
+	struct xlog	*log,
 	xfs_lsn_t	sequence)
 {
 	struct xfs_cil		*cil = log->l_cilp;
@@ -833,7 +833,7 @@
  */
 int
 xlog_cil_init(
-	struct log	*log)
+	struct xlog	*log)
 {
 	struct xfs_cil	*cil;
 	struct xfs_cil_ctx *ctx;
@@ -869,7 +869,7 @@
 
 void
 xlog_cil_destroy(
-	struct log	*log)
+	struct xlog	*log)
 {
 	if (log->l_cilp->xc_ctx) {
 		if (log->l_cilp->xc_ctx->ticket)
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index 5bc3326..72eba22 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -19,7 +19,7 @@
 #define __XFS_LOG_PRIV_H__
 
 struct xfs_buf;
-struct log;
+struct xlog;
 struct xlog_ticket;
 struct xfs_mount;
 
@@ -352,7 +352,7 @@
 	struct xlog_in_core	*ic_next;
 	struct xlog_in_core	*ic_prev;
 	struct xfs_buf		*ic_bp;
-	struct log		*ic_log;
+	struct xlog		*ic_log;
 	int			ic_size;
 	int			ic_offset;
 	int			ic_bwritecnt;
@@ -409,7 +409,7 @@
  * operations almost as efficient as the old logging methods.
  */
 struct xfs_cil {
-	struct log		*xc_log;
+	struct xlog		*xc_log;
 	struct list_head	xc_cil;
 	spinlock_t		xc_cil_lock;
 	struct xfs_cil_ctx	*xc_ctx;
@@ -487,7 +487,7 @@
  * overflow 31 bits worth of byte offset, so using a byte number will mean
  * that round off problems won't occur when releasing partial reservations.
  */
-typedef struct log {
+typedef struct xlog {
 	/* The following fields don't need locking */
 	struct xfs_mount	*l_mp;	        /* mount point */
 	struct xfs_ail		*l_ailp;	/* AIL log is working with */
@@ -553,9 +553,14 @@
 extern void	 xlog_pack_data(xlog_t *log, xlog_in_core_t *iclog, int);
 
 extern kmem_zone_t *xfs_log_ticket_zone;
-struct xlog_ticket *xlog_ticket_alloc(struct log *log, int unit_bytes,
-				int count, char client, bool permanent,
-				xfs_km_flags_t alloc_flags);
+struct xlog_ticket *
+xlog_ticket_alloc(
+	struct xlog	*log,
+	int		unit_bytes,
+	int		count,
+	char		client,
+	bool		permanent,
+	xfs_km_flags_t	alloc_flags);
 
 
 static inline void
@@ -567,9 +572,14 @@
 }
 
 void	xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);
-int	xlog_write(struct log *log, struct xfs_log_vec *log_vector,
-				struct xlog_ticket *tic, xfs_lsn_t *start_lsn,
-				xlog_in_core_t **commit_iclog, uint flags);
+int
+xlog_write(
+	struct xlog		*log,
+	struct xfs_log_vec	*log_vector,
+	struct xlog_ticket	*tic,
+	xfs_lsn_t		*start_lsn,
+	struct xlog_in_core	**commit_iclog,
+	uint			flags);
 
 /*
  * When we crack an atomic LSN, we sample it first so that the value will not
@@ -629,17 +639,23 @@
 /*
  * Committed Item List interfaces
  */
-int	xlog_cil_init(struct log *log);
-void	xlog_cil_init_post_recovery(struct log *log);
-void	xlog_cil_destroy(struct log *log);
+int
+xlog_cil_init(struct xlog *log);
+void
+xlog_cil_init_post_recovery(struct xlog *log);
+void
+xlog_cil_destroy(struct xlog *log);
 
 /*
  * CIL force routines
  */
-xfs_lsn_t xlog_cil_force_lsn(struct log *log, xfs_lsn_t sequence);
+xfs_lsn_t
+xlog_cil_force_lsn(
+	struct xlog *log,
+	xfs_lsn_t sequence);
 
 static inline void
-xlog_cil_force(struct log *log)
+xlog_cil_force(struct xlog *log)
 {
 	xlog_cil_force_lsn(log, log->l_cilp->xc_current_sequence);
 }
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index ca38690..a7be98a 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -1471,8 +1471,8 @@
 
 STATIC int
 xlog_recover_add_to_cont_trans(
-	struct log		*log,
-	xlog_recover_t		*trans,
+	struct xlog		*log,
+	struct xlog_recover	*trans,
 	xfs_caddr_t		dp,
 	int			len)
 {
@@ -1517,8 +1517,8 @@
  */
 STATIC int
 xlog_recover_add_to_trans(
-	struct log		*log,
-	xlog_recover_t		*trans,
+	struct xlog		*log,
+	struct xlog_recover	*trans,
 	xfs_caddr_t		dp,
 	int			len)
 {
@@ -1588,8 +1588,8 @@
  */
 STATIC int
 xlog_recover_reorder_trans(
-	struct log		*log,
-	xlog_recover_t		*trans,
+	struct xlog		*log,
+	struct xlog_recover	*trans,
 	int			pass)
 {
 	xlog_recover_item_t	*item, *n;
@@ -1642,8 +1642,8 @@
  */
 STATIC int
 xlog_recover_buffer_pass1(
-	struct log		*log,
-	xlog_recover_item_t	*item)
+	struct xlog			*log,
+	struct xlog_recover_item	*item)
 {
 	xfs_buf_log_format_t	*buf_f = item->ri_buf[0].i_addr;
 	struct list_head	*bucket;
@@ -1696,7 +1696,7 @@
  */
 STATIC int
 xlog_check_buffer_cancelled(
-	struct log		*log,
+	struct xlog		*log,
 	xfs_daddr_t		blkno,
 	uint			len,
 	ushort			flags)
@@ -2689,9 +2689,9 @@
 
 STATIC int
 xlog_recover_commit_pass1(
-	struct log		*log,
-	struct xlog_recover	*trans,
-	xlog_recover_item_t	*item)
+	struct xlog			*log,
+	struct xlog_recover		*trans,
+	struct xlog_recover_item	*item)
 {
 	trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS1);
 
@@ -2716,10 +2716,10 @@
 
 STATIC int
 xlog_recover_commit_pass2(
-	struct log		*log,
-	struct xlog_recover	*trans,
-	struct list_head	*buffer_list,
-	xlog_recover_item_t	*item)
+	struct xlog			*log,
+	struct xlog_recover		*trans,
+	struct list_head		*buffer_list,
+	struct xlog_recover_item	*item)
 {
 	trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS2);
 
@@ -2753,7 +2753,7 @@
  */
 STATIC int
 xlog_recover_commit_trans(
-	struct log		*log,
+	struct xlog		*log,
 	struct xlog_recover	*trans,
 	int			pass)
 {
@@ -2793,8 +2793,8 @@
 
 STATIC int
 xlog_recover_unmount_trans(
-	struct log		*log,
-	xlog_recover_t		*trans)
+	struct xlog		*log,
+	struct xlog_recover	*trans)
 {
 	/* Do nothing now */
 	xfs_warn(log->l_mp, "%s: Unmount LR", __func__);
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 8b89c5a..90c1fc9 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -53,7 +53,7 @@
 
 #include "xfs_sync.h"
 
-struct log;
+struct xlog;
 struct xfs_mount_args;
 struct xfs_inode;
 struct xfs_bmbt_irec;
@@ -133,7 +133,7 @@
 	uint			m_readio_blocks; /* min read size blocks */
 	uint			m_writeio_log;	/* min write size log bytes */
 	uint			m_writeio_blocks; /* min write size blocks */
-	struct log		*m_log;		/* log specific stuff */
+	struct xlog		*m_log;		/* log specific stuff */
 	int			m_logbufs;	/* number of log buffers */
 	int			m_logbsize;	/* size of each log buffer */
 	uint			m_rsumlevels;	/* rt summary levels */
diff --git a/fs/xfs/xfs_sync.c b/fs/xfs/xfs_sync.c
index c9d3409..1e9ee06 100644
--- a/fs/xfs/xfs_sync.c
+++ b/fs/xfs/xfs_sync.c
@@ -386,23 +386,23 @@
 	 * We shouldn't write/force the log if we are in the mount/unmount
 	 * process or on a read only filesystem. The workqueue still needs to be
 	 * active in both cases, however, because it is used for inode reclaim
-	 * during these times.  Use the s_umount semaphore to provide exclusion
-	 * with unmount.
+	 * during these times.  Use the MS_ACTIVE flag to avoid doing anything
+	 * during mount.  Doing work during unmount is avoided by calling
+	 * cancel_delayed_work_sync on this work queue before tearing down
+	 * the ail and the log in xfs_log_unmount.
 	 */
-	if (down_read_trylock(&mp->m_super->s_umount)) {
-		if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
-			/* dgc: errors ignored here */
-			if (mp->m_super->s_frozen == SB_UNFROZEN &&
-			    xfs_log_need_covered(mp))
-				error = xfs_fs_log_dummy(mp);
-			else
-				xfs_log_force(mp, 0);
+	if (!(mp->m_super->s_flags & MS_ACTIVE) &&
+	    !(mp->m_flags & XFS_MOUNT_RDONLY)) {
+		/* dgc: errors ignored here */
+		if (mp->m_super->s_frozen == SB_UNFROZEN &&
+		    xfs_log_need_covered(mp))
+			error = xfs_fs_log_dummy(mp);
+		else
+			xfs_log_force(mp, 0);
 
-			/* start pushing all the metadata that is currently
-			 * dirty */
-			xfs_ail_push_all(mp->m_ail);
-		}
-		up_read(&mp->m_super->s_umount);
+		/* start pushing all the metadata that is currently
+		 * dirty */
+		xfs_ail_push_all(mp->m_ail);
 	}
 
 	/* queue us up again */
diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h
index 7cf9d35..caf5dab 100644
--- a/fs/xfs/xfs_trace.h
+++ b/fs/xfs/xfs_trace.h
@@ -32,7 +32,7 @@
 struct xfs_dquot;
 struct xfs_log_item;
 struct xlog_ticket;
-struct log;
+struct xlog;
 struct xlog_recover;
 struct xlog_recover_item;
 struct xfs_buf_log_format;
@@ -762,7 +762,7 @@
 DEFINE_DQUOT_EVENT(xfs_dqflush_done);
 
 DECLARE_EVENT_CLASS(xfs_loggrant_class,
-	TP_PROTO(struct log *log, struct xlog_ticket *tic),
+	TP_PROTO(struct xlog *log, struct xlog_ticket *tic),
 	TP_ARGS(log, tic),
 	TP_STRUCT__entry(
 		__field(dev_t, dev)
@@ -830,7 +830,7 @@
 
 #define DEFINE_LOGGRANT_EVENT(name) \
 DEFINE_EVENT(xfs_loggrant_class, name, \
-	TP_PROTO(struct log *log, struct xlog_ticket *tic), \
+	TP_PROTO(struct xlog *log, struct xlog_ticket *tic), \
 	TP_ARGS(log, tic))
 DEFINE_LOGGRANT_EVENT(xfs_log_done_nonperm);
 DEFINE_LOGGRANT_EVENT(xfs_log_done_perm);
@@ -1664,7 +1664,7 @@
 DEFINE_SWAPEXT_EVENT(xfs_swap_extent_after);
 
 DECLARE_EVENT_CLASS(xfs_log_recover_item_class,
-	TP_PROTO(struct log *log, struct xlog_recover *trans,
+	TP_PROTO(struct xlog *log, struct xlog_recover *trans,
 		struct xlog_recover_item *item, int pass),
 	TP_ARGS(log, trans, item, pass),
 	TP_STRUCT__entry(
@@ -1698,7 +1698,7 @@
 
 #define DEFINE_LOG_RECOVER_ITEM(name) \
 DEFINE_EVENT(xfs_log_recover_item_class, name, \
-	TP_PROTO(struct log *log, struct xlog_recover *trans, \
+	TP_PROTO(struct xlog *log, struct xlog_recover *trans, \
 		struct xlog_recover_item *item, int pass), \
 	TP_ARGS(log, trans, item, pass))
 
@@ -1709,7 +1709,7 @@
 DEFINE_LOG_RECOVER_ITEM(xfs_log_recover_item_recover);
 
 DECLARE_EVENT_CLASS(xfs_log_recover_buf_item_class,
-	TP_PROTO(struct log *log, struct xfs_buf_log_format *buf_f),
+	TP_PROTO(struct xlog *log, struct xfs_buf_log_format *buf_f),
 	TP_ARGS(log, buf_f),
 	TP_STRUCT__entry(
 		__field(dev_t, dev)
@@ -1739,7 +1739,7 @@
 
 #define DEFINE_LOG_RECOVER_BUF_ITEM(name) \
 DEFINE_EVENT(xfs_log_recover_buf_item_class, name, \
-	TP_PROTO(struct log *log, struct xfs_buf_log_format *buf_f), \
+	TP_PROTO(struct xlog *log, struct xfs_buf_log_format *buf_f), \
 	TP_ARGS(log, buf_f))
 
 DEFINE_LOG_RECOVER_BUF_ITEM(xfs_log_recover_buf_not_cancel);
@@ -1752,7 +1752,7 @@
 DEFINE_LOG_RECOVER_BUF_ITEM(xfs_log_recover_buf_dquot_buf);
 
 DECLARE_EVENT_CLASS(xfs_log_recover_ino_item_class,
-	TP_PROTO(struct log *log, struct xfs_inode_log_format *in_f),
+	TP_PROTO(struct xlog *log, struct xfs_inode_log_format *in_f),
 	TP_ARGS(log, in_f),
 	TP_STRUCT__entry(
 		__field(dev_t, dev)
@@ -1790,7 +1790,7 @@
 )
 #define DEFINE_LOG_RECOVER_INO_ITEM(name) \
 DEFINE_EVENT(xfs_log_recover_ino_item_class, name, \
-	TP_PROTO(struct log *log, struct xfs_inode_log_format *in_f), \
+	TP_PROTO(struct xlog *log, struct xfs_inode_log_format *in_f), \
 	TP_ARGS(log, in_f))
 
 DEFINE_LOG_RECOVER_INO_ITEM(xfs_log_recover_inode_recover);
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index 2520a6e..7d10f96 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -3,10 +3,18 @@
 
 #include <linux/compiler.h>
 
+#ifdef CONFIG_GENERIC_BUG
+#define BUGFLAG_WARNING		(1 << 0)
+#define BUGFLAG_TAINT(taint)	(BUGFLAG_WARNING | ((taint) << 8))
+#define BUG_GET_TAINT(bug)	((bug)->flags >> 8)
+#endif
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+
 #ifdef CONFIG_BUG
 
 #ifdef CONFIG_GENERIC_BUG
-#ifndef __ASSEMBLY__
 struct bug_entry {
 #ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
 	unsigned long	bug_addr;
@@ -23,12 +31,6 @@
 #endif
 	unsigned short	flags;
 };
-#endif		/* __ASSEMBLY__ */
-
-#define BUGFLAG_WARNING		(1 << 0)
-#define BUGFLAG_TAINT(taint)	(BUGFLAG_WARNING | ((taint) << 8))
-#define BUG_GET_TAINT(bug)	((bug)->flags >> 8)
-
 #endif	/* CONFIG_GENERIC_BUG */
 
 /*
@@ -60,7 +62,6 @@
  * to provide better diagnostics.
  */
 #ifndef __WARN_TAINT
-#ifndef __ASSEMBLY__
 extern __printf(3, 4)
 void warn_slowpath_fmt(const char *file, const int line,
 		       const char *fmt, ...);
@@ -69,7 +70,6 @@
 			     const char *fmt, ...);
 extern void warn_slowpath_null(const char *file, const int line);
 #define WANT_WARN_ON_SLOWPATH
-#endif
 #define __WARN()		warn_slowpath_null(__FILE__, __LINE__)
 #define __WARN_printf(arg...)	warn_slowpath_fmt(__FILE__, __LINE__, arg)
 #define __WARN_printf_taint(taint, arg...)				\
@@ -202,4 +202,6 @@
 # define WARN_ON_SMP(x)			({0;})
 #endif
 
+#endif /* __ASSEMBLY__ */
+
 #endif
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 6f2b45a..ff4947b 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -484,6 +484,16 @@
 	/*
 	 * The barrier will stabilize the pmdval in a register or on
 	 * the stack so that it will stop changing under the code.
+	 *
+	 * When CONFIG_TRANSPARENT_HUGEPAGE=y on x86 32bit PAE,
+	 * pmd_read_atomic is allowed to return a not atomic pmdval
+	 * (for example pointing to an hugepage that has never been
+	 * mapped in the pmd). The below checks will only care about
+	 * the low part of the pmd with 32bit PAE x86 anyway, with the
+	 * exception of pmd_none(). So the important thing is that if
+	 * the low part of the pmd is found null, the high part will
+	 * be also null or the pmd_none() check below would be
+	 * confused.
 	 */
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 	barrier();
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 73e4560..bac55c2 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -54,7 +54,7 @@
 	struct drm_object_properties *properties;
 };
 
-#define DRM_OBJECT_MAX_PROPERTY 16
+#define DRM_OBJECT_MAX_PROPERTY 24
 struct drm_object_properties {
 	int count;
 	uint32_t ids[DRM_OBJECT_MAX_PROPERTY];
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 81368ab..a7aec39 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -1,7 +1,3 @@
-/*
-   This file is auto-generated from the drm_pciids.txt in the DRM CVS
-   Please contact dri-devel@lists.sf.net to add new cards to this list
-*/
 #define radeon_PCI_IDS \
 	{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
diff --git a/include/linux/aio.h b/include/linux/aio.h
index 2314ad8..b1a520e 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -140,6 +140,7 @@
 		(x)->ki_dtor = NULL;			\
 		(x)->ki_obj.tsk = tsk;			\
 		(x)->ki_user_data = 0;                  \
+		(x)->private = NULL;			\
 	} while (0)
 
 #define AIO_RING_MAGIC			0xa10a10a1
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ba43f40..07954b0 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -827,7 +827,6 @@
 extern void blk_complete_request(struct request *);
 extern void __blk_complete_request(struct request *);
 extern void blk_abort_request(struct request *);
-extern void blk_abort_queue(struct request_queue *);
 extern void blk_unprep_request(struct request *);
 
 /*
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
index eb3f84b..9c7f580 100644
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -64,7 +64,7 @@
 		.parent_names = _parent_names,			\
 		.num_parents = ARRAY_SIZE(_parent_names),	\
 		.parents = _parents,				\
-		.flags = _flags,				\
+		.flags = _flags | CLK_IS_BASIC,			\
 	}
 
 #define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate,		\
@@ -103,9 +103,9 @@
 	DEFINE_CLK(_name, clk_gate_ops, _flags,			\
 			_name##_parent_names, _name##_parents);
 
-#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
+#define _DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
 				_flags, _reg, _shift, _width,	\
-				_divider_flags, _lock)		\
+				_divider_flags, _table, _lock)	\
 	static struct clk _name;				\
 	static const char *_name##_parent_names[] = {		\
 		_parent_name,					\
@@ -121,11 +121,27 @@
 		.shift = _shift,				\
 		.width = _width,				\
 		.flags = _divider_flags,			\
+		.table = _table,				\
 		.lock = _lock,					\
 	};							\
 	DEFINE_CLK(_name, clk_divider_ops, _flags,		\
 			_name##_parent_names, _name##_parents);
 
+#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
+				_flags, _reg, _shift, _width,	\
+				_divider_flags, _lock)		\
+	_DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
+				_flags, _reg, _shift, _width,	\
+				_divider_flags, NULL, _lock)
+
+#define DEFINE_CLK_DIVIDER_TABLE(_name, _parent_name,		\
+				_parent_ptr, _flags, _reg,	\
+				_shift, _width, _divider_flags,	\
+				_table, _lock)			\
+	_DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
+				_flags, _reg, _shift, _width,	\
+				_divider_flags, _table, _lock)	\
+
 #define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags,	\
 				_reg, _shift, _width,		\
 				_mux_flags, _lock)		\
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 4a0b483..77335fa 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -25,6 +25,7 @@
 #define CLK_SET_RATE_PARENT	BIT(2) /* propagate rate change up one level */
 #define CLK_IGNORE_UNUSED	BIT(3) /* do not gate even if unused */
 #define CLK_IS_ROOT		BIT(4) /* root clk, has no parent */
+#define CLK_IS_BASIC		BIT(5) /* Basic clk, can't do a to_clk_foo() */
 
 struct clk_hw;
 
@@ -143,7 +144,7 @@
  */
 struct clk_hw {
 	struct clk *clk;
-	struct clk_init_data *init;
+	const struct clk_init_data *init;
 };
 
 /*
@@ -171,6 +172,8 @@
 		const char *parent_name, unsigned long flags,
 		unsigned long fixed_rate);
 
+void of_fixed_clk_setup(struct device_node *np);
+
 /**
  * struct clk_gate - gating clock
  *
@@ -203,6 +206,11 @@
 		void __iomem *reg, u8 bit_idx,
 		u8 clk_gate_flags, spinlock_t *lock);
 
+struct clk_div_table {
+	unsigned int	val;
+	unsigned int	div;
+};
+
 /**
  * struct clk_divider - adjustable divider clock
  *
@@ -210,6 +218,7 @@
  * @reg:	register containing the divider
  * @shift:	shift to the divider bit field
  * @width:	width of the divider bit field
+ * @table:	array of value/divider pairs, last entry should have div = 0
  * @lock:	register lock
  *
  * Clock with an adjustable divider affecting its output frequency.  Implements
@@ -229,6 +238,7 @@
 	u8		shift;
 	u8		width;
 	u8		flags;
+	const struct clk_div_table	*table;
 	spinlock_t	*lock;
 };
 
@@ -240,6 +250,11 @@
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
 		u8 clk_divider_flags, spinlock_t *lock);
+struct clk *clk_register_divider_table(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_divider_flags, const struct clk_div_table *table,
+		spinlock_t *lock);
 
 /**
  * struct clk_mux - multiplexer clock
@@ -334,5 +349,19 @@
 void __clk_reparent(struct clk *clk, struct clk *new_parent);
 unsigned long __clk_round_rate(struct clk *clk, unsigned long rate);
 
+struct of_device_id;
+
+typedef void (*of_clk_init_cb_t)(struct device_node *);
+
+int of_clk_add_provider(struct device_node *np,
+			struct clk *(*clk_src_get)(struct of_phandle_args *args,
+						   void *data),
+			void *data);
+void of_clk_del_provider(struct device_node *np);
+struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
+				  void *data);
+const char *of_clk_get_parent_name(struct device_node *np, int index);
+void of_clk_init(const struct of_device_id *matches);
+
 #endif /* CONFIG_COMMON_CLK */
 #endif /* CLK_PROVIDER_H */
diff --git a/include/linux/clk.h b/include/linux/clk.h
index ad5c43e..8b70342 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -310,4 +310,23 @@
 int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
 			struct device *dev);
 
+struct device_node;
+struct of_phandle_args;
+
+#ifdef CONFIG_OF
+struct clk *of_clk_get(struct device_node *np, int index);
+struct clk *of_clk_get_by_name(struct device_node *np, const char *name);
+struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec);
+#else
+static inline struct clk *of_clk_get(struct device_node *np, int index)
+{
+	return NULL;
+}
+static inline struct clk *of_clk_get_by_name(struct device_node *np,
+					     const char *name)
+{
+	return NULL;
+}
+#endif
+
 #endif
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index e5834aa..6a6d7ae 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -47,9 +47,9 @@
  */
 #if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \
     !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4)
-# define inline		inline		__attribute__((always_inline))
-# define __inline__	__inline__	__attribute__((always_inline))
-# define __inline	__inline	__attribute__((always_inline))
+# define inline		inline		__attribute__((always_inline)) notrace
+# define __inline__	__inline__	__attribute__((always_inline)) notrace
+# define __inline	__inline	__attribute__((always_inline)) notrace
 #else
 /* A lot of inline functions can cause havoc with function tracing */
 # define inline		inline		notrace
diff --git a/include/linux/input.h b/include/linux/input.h
index a816714..2740d08 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -116,6 +116,7 @@
 
 /**
  * EVIOCGMTSLOTS(len) - get MT slot values
+ * @len: size of the data buffer in bytes
  *
  * The ioctl buffer argument should be binary equivalent to
  *
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 61f5cec..a5261e3 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -301,8 +301,6 @@
  * @irq_pm_shutdown:	function called from core code on shutdown once per chip
  * @irq_print_chip:	optional to print special chip info in show_interrupts
  * @flags:		chip specific flags
- *
- * @release:		release function solely used by UML
  */
 struct irq_chip {
 	const char	*name;
diff --git a/include/linux/kmsg_dump.h b/include/linux/kmsg_dump.h
index 35f7237..d6bd501 100644
--- a/include/linux/kmsg_dump.h
+++ b/include/linux/kmsg_dump.h
@@ -21,6 +21,7 @@
  * is passed to the kernel.
  */
 enum kmsg_dump_reason {
+	KMSG_DUMP_UNDEF,
 	KMSG_DUMP_PANIC,
 	KMSG_DUMP_OOPS,
 	KMSG_DUMP_EMERG,
@@ -31,23 +32,37 @@
 
 /**
  * struct kmsg_dumper - kernel crash message dumper structure
- * @dump:	The callback which gets called on crashes. The buffer is passed
- * 		as two sections, where s1 (length l1) contains the older
- * 		messages and s2 (length l2) contains the newer.
  * @list:	Entry in the dumper list (private)
+ * @dump:	Call into dumping code which will retrieve the data with
+ * 		through the record iterator
+ * @max_reason:	filter for highest reason number that should be dumped
  * @registered:	Flag that specifies if this is already registered
  */
 struct kmsg_dumper {
-	void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason,
-			const char *s1, unsigned long l1,
-			const char *s2, unsigned long l2);
 	struct list_head list;
-	int registered;
+	void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason);
+	enum kmsg_dump_reason max_reason;
+	bool active;
+	bool registered;
+
+	/* private state of the kmsg iterator */
+	u32 cur_idx;
+	u32 next_idx;
+	u64 cur_seq;
+	u64 next_seq;
 };
 
 #ifdef CONFIG_PRINTK
 void kmsg_dump(enum kmsg_dump_reason reason);
 
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+			char *line, size_t size, size_t *len);
+
+bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+			  char *buf, size_t size, size_t *len);
+
+void kmsg_dump_rewind(struct kmsg_dumper *dumper);
+
 int kmsg_dump_register(struct kmsg_dumper *dumper);
 
 int kmsg_dump_unregister(struct kmsg_dumper *dumper);
@@ -56,6 +71,22 @@
 {
 }
 
+static inline bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+				const char *line, size_t size, size_t *len)
+{
+	return false;
+}
+
+static inline bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+					char *buf, size_t size, size_t *len)
+{
+	return false;
+}
+
+static inline void kmsg_dump_rewind(struct kmsg_dumper *dumper)
+{
+}
+
 static inline int kmsg_dump_register(struct kmsg_dumper *dumper)
 {
 	return -EINVAL;
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index c446435..96c158a 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -815,7 +815,7 @@
 #ifdef CONFIG_HAVE_KVM_EVENTFD
 
 void kvm_eventfd_init(struct kvm *kvm);
-int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags);
+int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args);
 void kvm_irqfd_release(struct kvm *kvm);
 void kvm_irq_routing_update(struct kvm *, struct kvm_irq_routing_table *);
 int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args);
@@ -824,7 +824,7 @@
 
 static inline void kvm_eventfd_init(struct kvm *kvm) {}
 
-static inline int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
+static inline int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
 {
 	return -EINVAL;
 }
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index dad95bd..704a626 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -57,8 +57,18 @@
 		};
 
 		union {
+#if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \
+	defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE)
 			/* Used for cmpxchg_double in slub */
 			unsigned long counters;
+#else
+			/*
+			 * Keep _count separate from slub cmpxchg_double data.
+			 * As the rest of the double word is protected by
+			 * slab_lock but _count is not.
+			 */
+			unsigned counters;
+#endif
 
 			struct {
 
diff --git a/include/linux/mmc/sdhci-spear.h b/include/linux/mmc/sdhci-spear.h
index 5cdc96d..e78c0e2 100644
--- a/include/linux/mmc/sdhci-spear.h
+++ b/include/linux/mmc/sdhci-spear.h
@@ -4,7 +4,7 @@
  * SDHCI declarations specific to ST SPEAr platform
  *
  * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
index c9fe66c..17446d3 100644
--- a/include/linux/mmc/sdio.h
+++ b/include/linux/mmc/sdio.h
@@ -98,7 +98,9 @@
 
 #define SDIO_CCCR_IF		0x07	/* bus interface controls */
 
+#define  SDIO_BUS_WIDTH_MASK	0x03	/* data bus width setting */
 #define  SDIO_BUS_WIDTH_1BIT	0x00
+#define  SDIO_BUS_WIDTH_RESERVED 0x01
 #define  SDIO_BUS_WIDTH_4BIT	0x02
 #define  SDIO_BUS_ECSI		0x20	/* Enable continuous SPI interrupt */
 #define  SDIO_BUS_SCSI		0x40	/* Support continuous SPI interrupt */
diff --git a/include/linux/netfilter/xt_HMARK.h b/include/linux/netfilter/xt_HMARK.h
index abb1650..826fc58 100644
--- a/include/linux/netfilter/xt_HMARK.h
+++ b/include/linux/netfilter/xt_HMARK.h
@@ -27,7 +27,12 @@
 		__u16	src;
 		__u16	dst;
 	} p16;
+	struct {
+		__be16	src;
+		__be16	dst;
+	} b16;
 	__u32	v32;
+	__be32	b32;
 };
 
 struct xt_hmark_info {
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
index fbb78fb..f58325a 100644
--- a/include/linux/nfs_fs_sb.h
+++ b/include/linux/nfs_fs_sb.h
@@ -25,6 +25,7 @@
  */
 struct nfs_client {
 	atomic_t		cl_count;
+	atomic_t		cl_mds_count;
 	int			cl_cons_state;	/* current construction state (-ve: init error) */
 #define NFS_CS_READY		0		/* ready to be used */
 #define NFS_CS_INITING		1		/* busy initialising */
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index d1a7bf5..8aadd90 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -348,6 +348,7 @@
 	const struct qstr *	name;
 	const struct nfs_server *server;	 /* Needed for ID mapping */
 	const u32 *		bitmask;
+	const u32 *		open_bitmap;
 	__u32			claim;
 	struct nfs4_sequence_args	seq_args;
 };
@@ -1236,6 +1237,7 @@
 	struct list_head	rpc_list;
 	atomic_t		refcnt;
 	struct nfs_page		*req;
+	struct nfs_writeverf	*verf;
 	struct pnfs_layout_segment *lseg;
 	loff_t			io_start;
 	const struct rpc_call_ops *mds_ops;
@@ -1273,6 +1275,7 @@
 struct nfs_write_header {
 	struct nfs_pgio_header	header;
 	struct nfs_write_data	rpc_data;
+	struct nfs_writeverf	verf;
 };
 
 struct nfs_mds_commit_info {
diff --git a/include/linux/pata_arasan_cf_data.h b/include/linux/pata_arasan_cf_data.h
index a6ee9aa..a7b4fc3 100644
--- a/include/linux/pata_arasan_cf_data.h
+++ b/include/linux/pata_arasan_cf_data.h
@@ -4,7 +4,7 @@
  * Arasan Compact Flash host controller platform data header file
  *
  * Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d8c379d..fefb4e1 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -176,6 +176,8 @@
 	PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
 	/* Provide indication device is assigned by a Virtual Machine Manager */
 	PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
+	/* Device causes system crash if in D3 during S3 sleep */
+	PCI_DEV_FLAGS_NO_D3_DURING_SLEEP = (__force pci_dev_flags_t) 8,
 };
 
 enum pci_irq_reroute_variant {
diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h
new file mode 100644
index 0000000..83fe9c2
--- /dev/null
+++ b/include/linux/platform_data/clk-integrator.h
@@ -0,0 +1 @@
+void integrator_clk_init(bool is_cp);
diff --git a/include/linux/platform_data/clk-u300.h b/include/linux/platform_data/clk-u300.h
new file mode 100644
index 0000000..8429e73
--- /dev/null
+++ b/include/linux/platform_data/clk-u300.h
@@ -0,0 +1 @@
+void __init u300_clk_init(void __iomem *base);
diff --git a/include/linux/prctl.h b/include/linux/prctl.h
index 3988012..289760f 100644
--- a/include/linux/prctl.h
+++ b/include/linux/prctl.h
@@ -141,6 +141,8 @@
  * Changing LSM security domain is considered a new privilege.  So, for example,
  * asking selinux for a specific new context (e.g. with runcon) will result
  * in execve returning -EPERM.
+ *
+ * See Documentation/prctl/no_new_privs.txt for more details.
  */
 #define PR_SET_NO_NEW_PRIVS	38
 #define PR_GET_NO_NEW_PRIVS	39
diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h
index 7ed7fd4..3b823d4 100644
--- a/include/linux/pstore_ram.h
+++ b/include/linux/pstore_ram.h
@@ -69,12 +69,14 @@
 						       size_t size,
 						       bool ecc);
 void persistent_ram_free(struct persistent_ram_zone *prz);
+void persistent_ram_zap(struct persistent_ram_zone *prz);
 struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev,
 		bool ecc);
 
 int persistent_ram_write(struct persistent_ram_zone *prz, const void *s,
 	unsigned int count);
 
+void persistent_ram_save_old(struct persistent_ram_zone *prz);
 size_t persistent_ram_old_size(struct persistent_ram_zone *prz);
 void *persistent_ram_old(struct persistent_ram_zone *prz);
 void persistent_ram_free_old(struct persistent_ram_zone *prz);
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 44835fb..f366320 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -160,7 +160,9 @@
 	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
 	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
 	PXA27x_SSP,
+	PXA3xx_SSP,
 	PXA168_SSP,
+	PXA910_SSP,
 	CE4100_SSP,
 };
 
diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h
index adb5e5a..854dc4c 100644
--- a/include/linux/rcutiny.h
+++ b/include/linux/rcutiny.h
@@ -87,8 +87,9 @@
 
 #ifdef CONFIG_TINY_RCU
 
-static inline int rcu_needs_cpu(int cpu)
+static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
 {
+	*delta_jiffies = ULONG_MAX;
 	return 0;
 }
 
@@ -96,8 +97,9 @@
 
 int rcu_preempt_needs_cpu(void);
 
-static inline int rcu_needs_cpu(int cpu)
+static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
 {
+	*delta_jiffies = ULONG_MAX;
 	return rcu_preempt_needs_cpu();
 }
 
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 3c6083c..952b793 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -32,7 +32,7 @@
 
 extern void rcu_init(void);
 extern void rcu_note_context_switch(int cpu);
-extern int rcu_needs_cpu(int cpu);
+extern int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies);
 extern void rcu_cpu_stall_reset(void);
 
 /*
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index b534a1b..642cb73 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -225,14 +225,11 @@
 	/* device driver is going to provide hardware time stamp */
 	SKBTX_IN_PROGRESS = 1 << 2,
 
-	/* ensure the originating sk reference is available on driver level */
-	SKBTX_DRV_NEEDS_SK_REF = 1 << 3,
-
 	/* device driver supports TX zero-copy buffers */
-	SKBTX_DEV_ZEROCOPY = 1 << 4,
+	SKBTX_DEV_ZEROCOPY = 1 << 3,
 
 	/* generate wifi status information (where possible) */
-	SKBTX_WIFI_STATUS = 1 << 5,
+	SKBTX_WIFI_STATUS = 1 << 4,
 };
 
 /*
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
index d3e1075..c73d144 100644
--- a/include/linux/spi/pxa2xx_spi.h
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -43,7 +43,7 @@
 	void (*cs_control)(u32 command);
 };
 
-#ifdef CONFIG_ARCH_PXA
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
 
 #include <linux/clk.h>
 #include <mach/dma.h>
diff --git a/include/linux/splice.h b/include/linux/splice.h
index 26e5b61..09a545a 100644
--- a/include/linux/splice.h
+++ b/include/linux/splice.h
@@ -51,7 +51,8 @@
 struct splice_pipe_desc {
 	struct page **pages;		/* page map */
 	struct partial_page *partial;	/* pages[] may not be contig */
-	int nr_pages;			/* number of pages in map */
+	int nr_pages;			/* number of populated pages in map */
+	unsigned int nr_pages_max;	/* pages[] & partial[] arrays size */
 	unsigned int flags;		/* splice flags */
 	const struct pipe_buf_operations *ops;/* ops associated with output pipe */
 	void (*spd_release)(struct splice_pipe_desc *, unsigned int);
@@ -85,9 +86,8 @@
 /*
  * for dynamic pipe sizing
  */
-extern int splice_grow_spd(struct pipe_inode_info *, struct splice_pipe_desc *);
-extern void splice_shrink_spd(struct pipe_inode_info *,
-				struct splice_pipe_desc *);
+extern int splice_grow_spd(const struct pipe_inode_info *, struct splice_pipe_desc *);
+extern void splice_shrink_spd(struct splice_pipe_desc *);
 extern void spd_release_page(struct splice_pipe_desc *, unsigned int);
 
 extern const struct pipe_buf_operations page_cache_pipe_buf_ops;
diff --git a/include/linux/swapops.h b/include/linux/swapops.h
index 792d16d..47ead51 100644
--- a/include/linux/swapops.h
+++ b/include/linux/swapops.h
@@ -9,13 +9,15 @@
  * get good packing density in that tree, so the index should be dense in
  * the low-order bits.
  *
- * We arrange the `type' and `offset' fields so that `type' is at the five
+ * We arrange the `type' and `offset' fields so that `type' is at the seven
  * high-order bits of the swp_entry_t and `offset' is right-aligned in the
- * remaining bits.
+ * remaining bits.  Although `type' itself needs only five bits, we allow for
+ * shmem/tmpfs to shift it all up a further two bits: see swp_to_radix_entry().
  *
  * swp_entry_t's are *never* stored anywhere in their arch-dependent format.
  */
-#define SWP_TYPE_SHIFT(e)	(sizeof(e.val) * 8 - MAX_SWAPFILES_SHIFT)
+#define SWP_TYPE_SHIFT(e)	((sizeof(e.val) * 8) - \
+			(MAX_SWAPFILES_SHIFT + RADIX_TREE_EXCEPTIONAL_SHIFT))
 #define SWP_OFFSET_MASK(e)	((1UL << SWP_TYPE_SHIFT(e)) - 1)
 
 /*
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 4c5b632..5f359db 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -69,16 +69,16 @@
 #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
 
 enum { 
-	TCP_FLAG_CWR = __cpu_to_be32(0x00800000),
-	TCP_FLAG_ECE = __cpu_to_be32(0x00400000),
-	TCP_FLAG_URG = __cpu_to_be32(0x00200000),
-	TCP_FLAG_ACK = __cpu_to_be32(0x00100000),
-	TCP_FLAG_PSH = __cpu_to_be32(0x00080000),
-	TCP_FLAG_RST = __cpu_to_be32(0x00040000),
-	TCP_FLAG_SYN = __cpu_to_be32(0x00020000),
-	TCP_FLAG_FIN = __cpu_to_be32(0x00010000),
-	TCP_RESERVED_BITS = __cpu_to_be32(0x0F000000),
-	TCP_DATA_OFFSET = __cpu_to_be32(0xF0000000)
+	TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000),
+	TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000),
+	TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000),
+	TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000),
+	TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000),
+	TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000),
+	TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000),
+	TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000),
+	TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000),
+	TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000)
 }; 
 
 /*
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 7f855d5..49b3ac2 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -126,8 +126,6 @@
 	unsigned		wireless:1;	/* Wireless USB HCD */
 	unsigned		authorized_default:1;
 	unsigned		has_tt:1;	/* Integrated TT in root hub */
-	unsigned		broken_pci_sleep:1;	/* Don't put the
-			controller in PCI-D3 for system sleep */
 
 	unsigned int		irq;		/* irq allocated */
 	void __iomem		*regs;		/* device memory/io */
diff --git a/include/linux/vga_switcheroo.h b/include/linux/vga_switcheroo.h
index b455c7c..ddb419c 100644
--- a/include/linux/vga_switcheroo.h
+++ b/include/linux/vga_switcheroo.h
@@ -7,11 +7,19 @@
  * vga_switcheroo.h - Support for laptop with dual GPU using one set of outputs
  */
 
+#ifndef _LINUX_VGA_SWITCHEROO_H_
+#define _LINUX_VGA_SWITCHEROO_H_
+
 #include <linux/fb.h>
 
+struct pci_dev;
+
 enum vga_switcheroo_state {
 	VGA_SWITCHEROO_OFF,
 	VGA_SWITCHEROO_ON,
+	/* below are referred only from vga_switcheroo_get_client_state() */
+	VGA_SWITCHEROO_INIT,
+	VGA_SWITCHEROO_NOT_FOUND,
 };
 
 enum vga_switcheroo_client_id {
@@ -50,6 +58,8 @@
 
 int vga_switcheroo_process_delayed_switch(void);
 
+int vga_switcheroo_get_client_state(struct pci_dev *dev);
+
 #else
 
 static inline void vga_switcheroo_unregister_client(struct pci_dev *dev) {}
@@ -62,5 +72,8 @@
 	int id, bool active) { return 0; }
 static inline void vga_switcheroo_unregister_handler(void) {}
 static inline int vga_switcheroo_process_delayed_switch(void) { return 0; }
+static inline int vga_switcheroo_get_client_state(struct pci_dev *dev) { return VGA_SWITCHEROO_ON; }
+
 
 #endif
+#endif /* _LINUX_VGA_SWITCHEROO_H_ */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 370d111..2039c5d3 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -2640,9 +2640,9 @@
 
 /* Experimental, these three ioctls may change over the next couple of kernel
    versions. */
-#define VIDIOC_ENUM_DV_TIMINGS  _IOWR('V', 96, struct v4l2_enum_dv_timings)
-#define VIDIOC_QUERY_DV_TIMINGS  _IOR('V', 97, struct v4l2_dv_timings)
-#define VIDIOC_DV_TIMINGS_CAP   _IOWR('V', 98, struct v4l2_dv_timings_cap)
+#define VIDIOC_ENUM_DV_TIMINGS  _IOWR('V', 98, struct v4l2_enum_dv_timings)
+#define VIDIOC_QUERY_DV_TIMINGS  _IOR('V', 99, struct v4l2_dv_timings)
+#define VIDIOC_DV_TIMINGS_CAP   _IOWR('V', 100, struct v4l2_dv_timings_cap)
 
 /* Reminder: when adding new ioctls please add support for them to
    drivers/media/video/v4l2-compat-ioctl32.c as well! */
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 66a7b57..3def64b 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1144,6 +1144,12 @@
 	__u8     data[240];
 } __packed;
 
+#define HCI_EV_KEY_REFRESH_COMPLETE	0x30
+struct hci_ev_key_refresh_complete {
+	__u8	status;
+	__le16	handle;
+} __packed;
+
 #define HCI_EV_IO_CAPA_REQUEST		0x31
 struct hci_ev_io_capa_request {
 	bdaddr_t bdaddr;
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
index b94765e..2040bff 100644
--- a/include/net/inetpeer.h
+++ b/include/net/inetpeer.h
@@ -40,7 +40,10 @@
 	u32			pmtu_orig;
 	u32			pmtu_learned;
 	struct inetpeer_addr_base redirect_learned;
-	struct list_head	gc_list;
+	union {
+		struct list_head	gc_list;
+		struct rcu_head     gc_rcu;
+	};
 	/*
 	 * Once inet_peer is queued for deletion (refcnt == -1), following fields
 	 * are not available: rid, ip_id_count, tcp_ts, tcp_ts_stamp
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 1937c7d..95e39b6 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1940,6 +1940,11 @@
  *	to also unregister the device. If it returns 1, then mac80211
  *	will also go through the regular complete restart on resume.
  *
+ * @set_wakeup: Enable or disable wakeup when WoWLAN configuration is
+ *	modified. The reason is that device_set_wakeup_enable() is
+ *	supposed to be called when the configuration changes, not only
+ *	in suspend().
+ *
  * @add_interface: Called when a netdevice attached to the hardware is
  *	enabled. Because it is not called for monitor mode devices, @start
  *	and @stop must be implemented.
@@ -2966,6 +2971,7 @@
  * ieee80211_generic_frame_duration - Calculate the duration field for a frame
  * @hw: pointer obtained from ieee80211_alloc_hw().
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @band: the band to calculate the frame duration on
  * @frame_len: the length of the frame.
  * @rate: the rate at which the frame is going to be transmitted.
  *
diff --git a/include/net/phonet/gprs.h b/include/net/phonet/gprs.h
index 928daf5..bcd525e 100644
--- a/include/net/phonet/gprs.h
+++ b/include/net/phonet/gprs.h
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2008 Nokia Corporation.
  *
- * Author: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/include/net/route.h b/include/net/route.h
index ed2b78e..9870546 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -130,9 +130,9 @@
 {
 	struct flowi4 fl4 = {
 		.flowi4_oif = oif,
+		.flowi4_tos = tos,
 		.daddr = daddr,
 		.saddr = saddr,
-		.flowi4_tos = tos,
 	};
 	return ip_route_output_key(net, &fl4);
 }
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 55ce96b..9d7d54a 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -220,13 +220,16 @@
 
 struct qdisc_skb_cb {
 	unsigned int		pkt_len;
-	unsigned char		data[24];
+	u16			bond_queue_mapping;
+	u16			_pad;
+	unsigned char		data[20];
 };
 
 static inline void qdisc_cb_private_validate(const struct sk_buff *skb, int sz)
 {
 	struct qdisc_skb_cb *qcb;
-	BUILD_BUG_ON(sizeof(skb->cb) < sizeof(unsigned int) + sz);
+
+	BUILD_BUG_ON(sizeof(skb->cb) < offsetof(struct qdisc_skb_cb, data) + sz);
 	BUILD_BUG_ON(sizeof(qcb->data) < sz);
 }
 
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index e4652fe..fecdf31 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -912,6 +912,9 @@
 		/* Is this structure kfree()able? */
 		malloced:1;
 
+	/* Has this transport moved the ctsn since we last sacked */
+	__u32 sack_generation;
+
 	struct flowi fl;
 
 	/* This is the peer's IP address and port. */
@@ -1584,6 +1587,7 @@
 		 */
 		__u8    sack_needed;     /* Do we need to sack the peer? */
 		__u32	sack_cnt;
+		__u32	sack_generation;
 
 		/* These are capabilities which our peer advertised.  */
 		__u8	ecn_capable:1,	    /* Can peer do ECN? */
diff --git a/include/net/sctp/tsnmap.h b/include/net/sctp/tsnmap.h
index e7728bc..2c5d2b4 100644
--- a/include/net/sctp/tsnmap.h
+++ b/include/net/sctp/tsnmap.h
@@ -117,7 +117,8 @@
 int sctp_tsnmap_check(const struct sctp_tsnmap *, __u32 tsn);
 
 /* Mark this TSN as seen.  */
-int sctp_tsnmap_mark(struct sctp_tsnmap *, __u32 tsn);
+int sctp_tsnmap_mark(struct sctp_tsnmap *, __u32 tsn,
+		     struct sctp_transport *trans);
 
 /* Mark this TSN and all lower as seen. */
 void sctp_tsnmap_skip(struct sctp_tsnmap *map, __u32 tsn);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 6efb2e1..ba96988 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -151,6 +151,7 @@
 					   SD_LAST_BUGGY_SECTORS */
 	unsigned no_read_disc_info:1;	/* Avoid READ_DISC_INFO cmds */
 	unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
+	unsigned try_rc_10_first:1;	/* Try READ_CAPACACITY_10 first */
 	unsigned is_visible:1;	/* is the device visible in sysfs */
 
 	DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
diff --git a/include/sound/tea575x-tuner.h b/include/sound/tea575x-tuner.h
index ec3f910..0c3c2fb 100644
--- a/include/sound/tea575x-tuner.h
+++ b/include/sound/tea575x-tuner.h
@@ -44,6 +44,7 @@
 
 struct snd_tea575x {
 	struct v4l2_device *v4l2_dev;
+	struct v4l2_file_operations fops;
 	struct video_device vd;		/* video device */
 	int radio_nr;			/* radio_nr */
 	bool tea5759;			/* 5759 chip is present */
@@ -62,7 +63,7 @@
 	int (*ext_init)(struct snd_tea575x *tea);
 };
 
-int snd_tea575x_init(struct snd_tea575x *tea);
+int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner);
 void snd_tea575x_exit(struct snd_tea575x *tea);
 
 #endif /* __SOUND_TEA575X_TUNER_H */
diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h
index 1169599..c78a233 100644
--- a/include/target/target_core_fabric.h
+++ b/include/target/target_core_fabric.h
@@ -47,6 +47,7 @@
 	 */
 	int (*check_stop_free)(struct se_cmd *);
 	void (*release_cmd)(struct se_cmd *);
+	void (*put_session)(struct se_session *);
 	/*
 	 * Called with spin_lock_bh(struct se_portal_group->session_lock held.
 	 */
diff --git a/include/trace/events/rcu.h b/include/trace/events/rcu.h
index 1480900..d274734 100644
--- a/include/trace/events/rcu.h
+++ b/include/trace/events/rcu.h
@@ -289,6 +289,7 @@
  *	"In holdoff": Nothing to do, holding off after unsuccessful attempt.
  *	"Begin holdoff": Attempt failed, don't retry until next jiffy.
  *	"Dyntick with callbacks": Entering dyntick-idle despite callbacks.
+ *	"Dyntick with lazy callbacks": Entering dyntick-idle w/lazy callbacks.
  *	"More callbacks": Still more callbacks, try again to clear them out.
  *	"Callbacks drained": All callbacks processed, off to dyntick idle!
  *	"Timer": Timer fired to cause CPU to continue processing callbacks.
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 72fcd30..2097684 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -255,12 +255,17 @@
 
 EXPORT_SYMBOL_GPL(cgroup_lock_is_held);
 
+static int css_unbias_refcnt(int refcnt)
+{
+	return refcnt >= 0 ? refcnt : refcnt - CSS_DEACT_BIAS;
+}
+
 /* the current nr of refs, always >= 0 whether @css is deactivated or not */
 static int css_refcnt(struct cgroup_subsys_state *css)
 {
 	int v = atomic_read(&css->refcnt);
 
-	return v >= 0 ? v : v - CSS_DEACT_BIAS;
+	return css_unbias_refcnt(v);
 }
 
 /* convenient tests for these bits */
@@ -4982,10 +4987,12 @@
 void __css_put(struct cgroup_subsys_state *css)
 {
 	struct cgroup *cgrp = css->cgroup;
+	int v;
 
 	rcu_read_lock();
-	atomic_dec(&css->refcnt);
-	switch (css_refcnt(css)) {
+	v = css_unbias_refcnt(atomic_dec_return(&css->refcnt));
+
+	switch (v) {
 	case 1:
 		if (notify_on_release(cgrp)) {
 			set_bit(CGRP_RELEASABLE, &cgrp->flags);
diff --git a/kernel/events/core.c b/kernel/events/core.c
index f85c015..d7d71d6 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -253,9 +253,9 @@
 	return !event->cgrp || event->cgrp == cpuctx->cgrp;
 }
 
-static inline void perf_get_cgroup(struct perf_event *event)
+static inline bool perf_tryget_cgroup(struct perf_event *event)
 {
-	css_get(&event->cgrp->css);
+	return css_tryget(&event->cgrp->css);
 }
 
 static inline void perf_put_cgroup(struct perf_event *event)
@@ -484,7 +484,11 @@
 	event->cgrp = cgrp;
 
 	/* must be done before we fput() the file */
-	perf_get_cgroup(event);
+	if (!perf_tryget_cgroup(event)) {
+		event->cgrp = NULL;
+		ret = -ENOENT;
+		goto out;
+	}
 
 	/*
 	 * all events in a group must monitor
diff --git a/kernel/exit.c b/kernel/exit.c
index 34867cc..2f59cc3 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -72,6 +72,18 @@
 		list_del_rcu(&p->tasks);
 		list_del_init(&p->sibling);
 		__this_cpu_dec(process_counts);
+		/*
+		 * If we are the last child process in a pid namespace to be
+		 * reaped, notify the reaper sleeping zap_pid_ns_processes().
+		 */
+		if (IS_ENABLED(CONFIG_PID_NS)) {
+			struct task_struct *parent = p->real_parent;
+
+			if ((task_active_pid_ns(parent)->child_reaper == parent) &&
+			    list_empty(&parent->children) &&
+			    (parent->flags & PF_EXITING))
+				wake_up_process(parent);
+		}
 	}
 	list_del_rcu(&p->thread_group);
 }
@@ -643,6 +655,7 @@
 	mm_release(tsk, mm);
 	if (!mm)
 		return;
+	sync_mm_rss(mm);
 	/*
 	 * Serialize with any possible pending coredump.
 	 * We must hold mmap_sem around checking core_state
@@ -719,12 +732,6 @@
 
 		zap_pid_ns_processes(pid_ns);
 		write_lock_irq(&tasklist_lock);
-		/*
-		 * We can not clear ->child_reaper or leave it alone.
-		 * There may by stealth EXIT_DEAD tasks on ->children,
-		 * forget_original_parent() must move them somewhere.
-		 */
-		pid_ns->child_reaper = init_pid_ns.child_reaper;
 	} else if (father->signal->has_child_subreaper) {
 		struct task_struct *reaper;
 
diff --git a/kernel/panic.c b/kernel/panic.c
index 8ed89a1..d2a5f4e 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -27,7 +27,7 @@
 #define PANIC_TIMER_STEP 100
 #define PANIC_BLINK_SPD 18
 
-int panic_on_oops;
+int panic_on_oops = CONFIG_PANIC_ON_OOPS_VALUE;
 static unsigned long tainted_mask;
 static int pause_on_oops;
 static int pause_on_oops_flag;
@@ -108,8 +108,6 @@
 	 */
 	crash_kexec(NULL);
 
-	kmsg_dump(KMSG_DUMP_PANIC);
-
 	/*
 	 * Note smp_send_stop is the usual smp shutdown function, which
 	 * unfortunately means it may not be hardened to work in a panic
@@ -117,6 +115,8 @@
 	 */
 	smp_send_stop();
 
+	kmsg_dump(KMSG_DUMP_PANIC);
+
 	atomic_notifier_call_chain(&panic_notifier_list, 0, buf);
 
 	bust_spinlocks(0);
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index 16b20e3..b3c7fd5 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -184,11 +184,31 @@
 	}
 	read_unlock(&tasklist_lock);
 
+	/* Firstly reap the EXIT_ZOMBIE children we may have. */
 	do {
 		clear_thread_flag(TIF_SIGPENDING);
 		rc = sys_wait4(-1, NULL, __WALL, NULL);
 	} while (rc != -ECHILD);
 
+	/*
+	 * sys_wait4() above can't reap the TASK_DEAD children.
+	 * Make sure they all go away, see __unhash_process().
+	 */
+	for (;;) {
+		bool need_wait = false;
+
+		read_lock(&tasklist_lock);
+		if (!list_empty(&current->children)) {
+			__set_current_state(TASK_UNINTERRUPTIBLE);
+			need_wait = true;
+		}
+		read_unlock(&tasklist_lock);
+
+		if (!need_wait)
+			break;
+		schedule();
+	}
+
 	if (pid_ns->reboot)
 		current->signal->group_exit_code = pid_ns->reboot;
 
diff --git a/kernel/printk.c b/kernel/printk.c
index 32462d2..dba1821 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -193,12 +193,19 @@
  * separated by ',', and find the message after the ';' character.
  */
 
+enum log_flags {
+	LOG_DEFAULT = 0,
+	LOG_NOCONS = 1,		/* already flushed, do not print to console */
+};
+
 struct log {
 	u64 ts_nsec;		/* timestamp in nanoseconds */
 	u16 len;		/* length of entire record */
 	u16 text_len;		/* length of text buffer */
 	u16 dict_len;		/* length of dictionary buffer */
-	u16 level;		/* syslog level + facility */
+	u8 facility;		/* syslog facility */
+	u8 flags:5;		/* internal record flags */
+	u8 level:3;		/* syslog level */
 };
 
 /*
@@ -227,10 +234,10 @@
 #define LOG_LINE_MAX 1024
 
 /* record buffer */
-#if !defined(CONFIG_64BIT) || defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
+#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
 #define LOG_ALIGN 4
 #else
-#define LOG_ALIGN 8
+#define LOG_ALIGN __alignof__(struct log)
 #endif
 #define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
 static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
@@ -286,6 +293,7 @@
 
 /* insert record into the buffer, discard old ones, update heads */
 static void log_store(int facility, int level,
+		      enum log_flags flags, u64 ts_nsec,
 		      const char *dict, u16 dict_len,
 		      const char *text, u16 text_len)
 {
@@ -329,8 +337,13 @@
 	msg->text_len = text_len;
 	memcpy(log_dict(msg), dict, dict_len);
 	msg->dict_len = dict_len;
-	msg->level = (facility << 3) | (level & 7);
-	msg->ts_nsec = local_clock();
+	msg->facility = facility;
+	msg->level = level & 7;
+	msg->flags = flags & 0x1f;
+	if (ts_nsec > 0)
+		msg->ts_nsec = ts_nsec;
+	else
+		msg->ts_nsec = local_clock();
 	memset(log_dict(msg) + dict_len, 0, pad_len);
 	msg->len = sizeof(struct log) + text_len + dict_len + pad_len;
 
@@ -414,7 +427,9 @@
 	if (!user)
 		return -EBADF;
 
-	mutex_lock(&user->lock);
+	ret = mutex_lock_interruptible(&user->lock);
+	if (ret)
+		return ret;
 	raw_spin_lock(&logbuf_lock);
 	while (user->seq == log_next_seq) {
 		if (file->f_flags & O_NONBLOCK) {
@@ -444,7 +459,7 @@
 	ts_usec = msg->ts_nsec;
 	do_div(ts_usec, 1000);
 	len = sprintf(user->buf, "%u,%llu,%llu;",
-		      msg->level, user->seq, ts_usec);
+		      (msg->facility << 3) | msg->level, user->seq, ts_usec);
 
 	/* escape non-printable characters */
 	for (i = 0; i < msg->text_len; i++) {
@@ -785,6 +800,21 @@
 #endif
 module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR);
 
+static size_t print_time(u64 ts, char *buf)
+{
+	unsigned long rem_nsec;
+
+	if (!printk_time)
+		return 0;
+
+	if (!buf)
+		return 15;
+
+	rem_nsec = do_div(ts, 1000000000);
+	return sprintf(buf, "[%5lu.%06lu] ",
+		       (unsigned long)ts, rem_nsec / 1000);
+}
+
 static size_t print_prefix(const struct log *msg, bool syslog, char *buf)
 {
 	size_t len = 0;
@@ -801,18 +831,7 @@
 		}
 	}
 
-	if (printk_time) {
-		if (buf) {
-			unsigned long long ts = msg->ts_nsec;
-			unsigned long rem_nsec = do_div(ts, 1000000000);
-
-			len += sprintf(buf + len, "[%5lu.%06lu] ",
-					 (unsigned long) ts, rem_nsec / 1000);
-		} else {
-			len += 15;
-		}
-	}
-
+	len += print_time(msg->ts_nsec, buf ? buf + len : NULL);
 	return len;
 }
 
@@ -860,26 +879,49 @@
 {
 	char *text;
 	struct log *msg;
-	int len;
+	int len = 0;
 
 	text = kmalloc(LOG_LINE_MAX, GFP_KERNEL);
 	if (!text)
 		return -ENOMEM;
 
-	raw_spin_lock_irq(&logbuf_lock);
-	if (syslog_seq < log_first_seq) {
-		/* messages are gone, move to first one */
-		syslog_seq = log_first_seq;
-		syslog_idx = log_first_idx;
-	}
-	msg = log_from_idx(syslog_idx);
-	len = msg_print_text(msg, true, text, LOG_LINE_MAX);
-	syslog_idx = log_next(syslog_idx);
-	syslog_seq++;
-	raw_spin_unlock_irq(&logbuf_lock);
+	while (size > 0) {
+		size_t n;
 
-	if (len > 0 && copy_to_user(buf, text, len))
-		len = -EFAULT;
+		raw_spin_lock_irq(&logbuf_lock);
+		if (syslog_seq < log_first_seq) {
+			/* messages are gone, move to first one */
+			syslog_seq = log_first_seq;
+			syslog_idx = log_first_idx;
+		}
+		if (syslog_seq == log_next_seq) {
+			raw_spin_unlock_irq(&logbuf_lock);
+			break;
+		}
+		msg = log_from_idx(syslog_idx);
+		n = msg_print_text(msg, true, text, LOG_LINE_MAX);
+		if (n <= size) {
+			syslog_idx = log_next(syslog_idx);
+			syslog_seq++;
+		} else
+			n = 0;
+		raw_spin_unlock_irq(&logbuf_lock);
+
+		if (!n)
+			break;
+
+		len += n;
+		size -= n;
+		buf += n;
+		n = copy_to_user(buf - n, text, n);
+
+		if (n) {
+			len -= n;
+			if (!len)
+				len = -EFAULT;
+			break;
+		}
+	}
 
 	kfree(text);
 	return len;
@@ -909,7 +951,7 @@
 		/*
 		 * Find first record that fits, including all following records,
 		 * into the user-provided buffer for this dump.
-		*/
+		 */
 		seq = clear_seq;
 		idx = clear_idx;
 		while (seq < log_next_seq) {
@@ -919,6 +961,8 @@
 			idx = log_next(idx);
 			seq++;
 		}
+
+		/* move first record forward until length fits into the buffer */
 		seq = clear_seq;
 		idx = clear_idx;
 		while (len > size && seq < log_next_seq) {
@@ -929,7 +973,7 @@
 			seq++;
 		}
 
-		/* last message in this dump */
+		/* last message fitting into this dump */
 		next_seq = log_next_seq;
 
 		len = 0;
@@ -974,6 +1018,7 @@
 {
 	bool clear = false;
 	static int saved_console_loglevel = -1;
+	static DEFINE_MUTEX(syslog_mutex);
 	int error;
 
 	error = check_syslog_permissions(type, from_file);
@@ -1000,11 +1045,17 @@
 			error = -EFAULT;
 			goto out;
 		}
-		error = wait_event_interruptible(log_wait,
-						 syslog_seq != log_next_seq);
+		error = mutex_lock_interruptible(&syslog_mutex);
 		if (error)
 			goto out;
+		error = wait_event_interruptible(log_wait,
+						 syslog_seq != log_next_seq);
+		if (error) {
+			mutex_unlock(&syslog_mutex);
+			goto out;
+		}
 		error = syslog_print(buf, len);
+		mutex_unlock(&syslog_mutex);
 		break;
 	/* Read/clear last kernel messages */
 	case SYSLOG_ACTION_READ_CLEAR:
@@ -1027,6 +1078,7 @@
 	/* Clear ring buffer */
 	case SYSLOG_ACTION_CLEAR:
 		syslog_print_all(NULL, 0, true);
+		break;
 	/* Disable logging to console */
 	case SYSLOG_ACTION_CONSOLE_OFF:
 		if (saved_console_loglevel == -1)
@@ -1259,15 +1311,92 @@
 	}
 }
 
+/*
+ * Continuation lines are buffered, and not committed to the record buffer
+ * until the line is complete, or a race forces it. The line fragments
+ * though, are printed immediately to the consoles to ensure everything has
+ * reached the console in case of a kernel crash.
+ */
+static struct cont {
+	char buf[LOG_LINE_MAX];
+	size_t len;			/* length == 0 means unused buffer */
+	size_t cons;			/* bytes written to console */
+	struct task_struct *owner;	/* task of first print*/
+	u64 ts_nsec;			/* time of first print */
+	u8 level;			/* log level of first message */
+	u8 facility;			/* log level of first message */
+	bool flushed:1;			/* buffer sealed and committed */
+} cont;
+
+static void cont_flush(void)
+{
+	if (cont.flushed)
+		return;
+	if (cont.len == 0)
+		return;
+
+	log_store(cont.facility, cont.level, LOG_NOCONS, cont.ts_nsec,
+		  NULL, 0, cont.buf, cont.len);
+
+	cont.flushed = true;
+}
+
+static bool cont_add(int facility, int level, const char *text, size_t len)
+{
+	if (cont.len && cont.flushed)
+		return false;
+
+	if (cont.len + len > sizeof(cont.buf)) {
+		cont_flush();
+		return false;
+	}
+
+	if (!cont.len) {
+		cont.facility = facility;
+		cont.level = level;
+		cont.owner = current;
+		cont.ts_nsec = local_clock();
+		cont.cons = 0;
+		cont.flushed = false;
+	}
+
+	memcpy(cont.buf + cont.len, text, len);
+	cont.len += len;
+	return true;
+}
+
+static size_t cont_print_text(char *text, size_t size)
+{
+	size_t textlen = 0;
+	size_t len;
+
+	if (cont.cons == 0) {
+		textlen += print_time(cont.ts_nsec, text);
+		size -= textlen;
+	}
+
+	len = cont.len - cont.cons;
+	if (len > 0) {
+		if (len+1 > size)
+			len = size-1;
+		memcpy(text + textlen, cont.buf + cont.cons, len);
+		textlen += len;
+		cont.cons = cont.len;
+	}
+
+	if (cont.flushed) {
+		text[textlen++] = '\n';
+		/* got everything, release buffer */
+		cont.len = 0;
+	}
+	return textlen;
+}
+
 asmlinkage int vprintk_emit(int facility, int level,
 			    const char *dict, size_t dictlen,
 			    const char *fmt, va_list args)
 {
 	static int recursion_bug;
-	static char cont_buf[LOG_LINE_MAX];
-	static size_t cont_len;
-	static int cont_level;
-	static struct task_struct *cont_task;
 	static char textbuf[LOG_LINE_MAX];
 	char *text = textbuf;
 	size_t text_len;
@@ -1313,7 +1442,8 @@
 		recursion_bug = 0;
 		printed_len += strlen(recursion_msg);
 		/* emit KERN_CRIT message */
-		log_store(0, 2, NULL, 0, recursion_msg, printed_len);
+		log_store(0, 2, LOG_DEFAULT, 0,
+			  NULL, 0, recursion_msg, printed_len);
 	}
 
 	/*
@@ -1351,55 +1481,37 @@
 	}
 
 	if (!newline) {
-		if (cont_len && (prefix || cont_task != current)) {
-			/*
-			 * Flush earlier buffer, which is either from a
-			 * different thread, or when we got a new prefix.
-			 */
-			log_store(facility, cont_level, NULL, 0, cont_buf, cont_len);
-			cont_len = 0;
-		}
+		/*
+		 * Flush the conflicting buffer. An earlier newline was missing,
+		 * or another task also prints continuation lines.
+		 */
+		if (cont.len && (prefix || cont.owner != current))
+			cont_flush();
 
-		if (!cont_len) {
-			cont_level = level;
-			cont_task = current;
-		}
-
-		/* buffer or append to earlier buffer from the same thread */
-		if (cont_len + text_len > sizeof(cont_buf))
-			text_len = sizeof(cont_buf) - cont_len;
-		memcpy(cont_buf + cont_len, text, text_len);
-		cont_len += text_len;
-	} else {
-		if (cont_len && cont_task == current) {
-			if (prefix) {
-				/*
-				 * New prefix from the same thread; flush. We
-				 * either got no earlier newline, or we race
-				 * with an interrupt.
-				 */
-				log_store(facility, cont_level,
-					  NULL, 0, cont_buf, cont_len);
-				cont_len = 0;
-			}
-
-			/* append to the earlier buffer and flush */
-			if (cont_len + text_len > sizeof(cont_buf))
-				text_len = sizeof(cont_buf) - cont_len;
-			memcpy(cont_buf + cont_len, text, text_len);
-			cont_len += text_len;
-			log_store(facility, cont_level,
-				  NULL, 0, cont_buf, cont_len);
-			cont_len = 0;
-			cont_task = NULL;
-			printed_len = cont_len;
-		} else {
-			/* ordinary single and terminated line */
-			log_store(facility, level,
+		/* buffer line if possible, otherwise store it right away */
+		if (!cont_add(facility, level, text, text_len))
+			log_store(facility, level, LOG_DEFAULT, 0,
 				  dict, dictlen, text, text_len);
-			printed_len = text_len;
+	} else {
+		bool stored = false;
+
+		/*
+		 * If an earlier newline was missing and it was the same task,
+		 * either merge it with the current buffer and flush, or if
+		 * there was a race with interrupts (prefix == true) then just
+		 * flush it out and store this line separately.
+		 */
+		if (cont.len && cont.owner == current) {
+			if (!prefix)
+				stored = cont_add(facility, level, text, text_len);
+			cont_flush();
 		}
+
+		if (!stored)
+			log_store(facility, level, LOG_DEFAULT, 0,
+				  dict, dictlen, text, text_len);
 	}
+	printed_len += text_len;
 
 	/*
 	 * Try to acquire and then immediately release the console semaphore.
@@ -1486,11 +1598,18 @@
 #else
 
 #define LOG_LINE_MAX 0
+static struct cont {
+	size_t len;
+	size_t cons;
+	u8 level;
+	bool flushed:1;
+} cont;
 static struct log *log_from_idx(u32 idx) { return NULL; }
 static u32 log_next(u32 idx) { return 0; }
 static void call_console_drivers(int level, const char *text, size_t len) {}
 static size_t msg_print_text(const struct log *msg, bool syslog,
 			     char *buf, size_t size) { return 0; }
+static size_t cont_print_text(char *text, size_t size) { return 0; }
 
 #endif /* CONFIG_PRINTK */
 
@@ -1782,6 +1901,7 @@
  */
 void console_unlock(void)
 {
+	static char text[LOG_LINE_MAX];
 	static u64 seen_seq;
 	unsigned long flags;
 	bool wake_klogd = false;
@@ -1794,10 +1914,23 @@
 
 	console_may_schedule = 0;
 
+	/* flush buffered message fragment immediately to console */
+	raw_spin_lock_irqsave(&logbuf_lock, flags);
+	if (cont.len && (cont.cons < cont.len || cont.flushed)) {
+		size_t len;
+
+		len = cont_print_text(text, sizeof(text));
+		raw_spin_unlock(&logbuf_lock);
+		stop_critical_timings();
+		call_console_drivers(cont.level, text, len);
+		start_critical_timings();
+		local_irq_restore(flags);
+	} else
+		raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
 again:
 	for (;;) {
 		struct log *msg;
-		static char text[LOG_LINE_MAX];
 		size_t len;
 		int level;
 
@@ -1812,13 +1945,22 @@
 			console_seq = log_first_seq;
 			console_idx = log_first_idx;
 		}
-
+skip:
 		if (console_seq == log_next_seq)
 			break;
 
 		msg = log_from_idx(console_idx);
-		level = msg->level & 7;
+		if (msg->flags & LOG_NOCONS) {
+			/*
+			 * Skip record we have buffered and already printed
+			 * directly to the console when we received it.
+			 */
+			console_idx = log_next(console_idx);
+			console_seq++;
+			goto skip;
+		}
 
+		level = msg->level;
 		len = msg_print_text(msg, false, text, sizeof(text));
 
 		console_idx = log_next(console_idx);
@@ -2300,48 +2442,210 @@
  * kmsg_dump - dump kernel log to kernel message dumpers.
  * @reason: the reason (oops, panic etc) for dumping
  *
- * Iterate through each of the dump devices and call the oops/panic
- * callbacks with the log buffer.
+ * Call each of the registered dumper's dump() callback, which can
+ * retrieve the kmsg records with kmsg_dump_get_line() or
+ * kmsg_dump_get_buffer().
  */
 void kmsg_dump(enum kmsg_dump_reason reason)
 {
-	u64 idx;
 	struct kmsg_dumper *dumper;
-	const char *s1, *s2;
-	unsigned long l1, l2;
 	unsigned long flags;
 
 	if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump)
 		return;
 
-	/* Theoretically, the log could move on after we do this, but
-	   there's not a lot we can do about that. The new messages
-	   will overwrite the start of what we dump. */
-
-	raw_spin_lock_irqsave(&logbuf_lock, flags);
-	if (syslog_seq < log_first_seq)
-		idx = syslog_idx;
-	else
-		idx = log_first_idx;
-
-	if (idx > log_next_idx) {
-		s1 = log_buf;
-		l1 = log_next_idx;
-
-		s2 = log_buf + idx;
-		l2 = log_buf_len - idx;
-	} else {
-		s1 = "";
-		l1 = 0;
-
-		s2 = log_buf + idx;
-		l2 = log_next_idx - idx;
-	}
-	raw_spin_unlock_irqrestore(&logbuf_lock, flags);
-
 	rcu_read_lock();
-	list_for_each_entry_rcu(dumper, &dump_list, list)
-		dumper->dump(dumper, reason, s1, l1, s2, l2);
+	list_for_each_entry_rcu(dumper, &dump_list, list) {
+		if (dumper->max_reason && reason > dumper->max_reason)
+			continue;
+
+		/* initialize iterator with data about the stored records */
+		dumper->active = true;
+
+		raw_spin_lock_irqsave(&logbuf_lock, flags);
+		dumper->cur_seq = clear_seq;
+		dumper->cur_idx = clear_idx;
+		dumper->next_seq = log_next_seq;
+		dumper->next_idx = log_next_idx;
+		raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+		/* invoke dumper which will iterate over records */
+		dumper->dump(dumper, reason);
+
+		/* reset iterator */
+		dumper->active = false;
+	}
 	rcu_read_unlock();
 }
+
+/**
+ * kmsg_dump_get_line - retrieve one kmsg log line
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @line: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the beginning of the kmsg buffer, with the oldest kmsg
+ * record, and copy one record into the provided buffer.
+ *
+ * Consecutive calls will return the next available record moving
+ * towards the end of the buffer with the youngest messages.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+			char *line, size_t size, size_t *len)
+{
+	unsigned long flags;
+	struct log *msg;
+	size_t l = 0;
+	bool ret = false;
+
+	if (!dumper->active)
+		goto out;
+
+	raw_spin_lock_irqsave(&logbuf_lock, flags);
+	if (dumper->cur_seq < log_first_seq) {
+		/* messages are gone, move to first available one */
+		dumper->cur_seq = log_first_seq;
+		dumper->cur_idx = log_first_idx;
+	}
+
+	/* last entry */
+	if (dumper->cur_seq >= log_next_seq) {
+		raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+		goto out;
+	}
+
+	msg = log_from_idx(dumper->cur_idx);
+	l = msg_print_text(msg, syslog,
+			      line, size);
+
+	dumper->cur_idx = log_next(dumper->cur_idx);
+	dumper->cur_seq++;
+	ret = true;
+	raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+out:
+	if (len)
+		*len = l;
+	return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
+
+/**
+ * kmsg_dump_get_buffer - copy kmsg log lines
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @buf: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the end of the kmsg buffer and fill the provided buffer
+ * with as many of the the *youngest* kmsg records that fit into it.
+ * If the buffer is large enough, all available kmsg records will be
+ * copied with a single call.
+ *
+ * Consecutive calls will fill the buffer with the next block of
+ * available older records, not including the earlier retrieved ones.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+			  char *buf, size_t size, size_t *len)
+{
+	unsigned long flags;
+	u64 seq;
+	u32 idx;
+	u64 next_seq;
+	u32 next_idx;
+	size_t l = 0;
+	bool ret = false;
+
+	if (!dumper->active)
+		goto out;
+
+	raw_spin_lock_irqsave(&logbuf_lock, flags);
+	if (dumper->cur_seq < log_first_seq) {
+		/* messages are gone, move to first available one */
+		dumper->cur_seq = log_first_seq;
+		dumper->cur_idx = log_first_idx;
+	}
+
+	/* last entry */
+	if (dumper->cur_seq >= dumper->next_seq) {
+		raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+		goto out;
+	}
+
+	/* calculate length of entire buffer */
+	seq = dumper->cur_seq;
+	idx = dumper->cur_idx;
+	while (seq < dumper->next_seq) {
+		struct log *msg = log_from_idx(idx);
+
+		l += msg_print_text(msg, true, NULL, 0);
+		idx = log_next(idx);
+		seq++;
+	}
+
+	/* move first record forward until length fits into the buffer */
+	seq = dumper->cur_seq;
+	idx = dumper->cur_idx;
+	while (l > size && seq < dumper->next_seq) {
+		struct log *msg = log_from_idx(idx);
+
+		l -= msg_print_text(msg, true, NULL, 0);
+		idx = log_next(idx);
+		seq++;
+	}
+
+	/* last message in next interation */
+	next_seq = seq;
+	next_idx = idx;
+
+	l = 0;
+	while (seq < dumper->next_seq) {
+		struct log *msg = log_from_idx(idx);
+
+		l += msg_print_text(msg, syslog,
+				    buf + l, size - l);
+
+		idx = log_next(idx);
+		seq++;
+	}
+
+	dumper->next_seq = next_seq;
+	dumper->next_idx = next_idx;
+	ret = true;
+	raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+out:
+	if (len)
+		*len = l;
+	return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer);
+
+/**
+ * kmsg_dump_rewind - reset the interator
+ * @dumper: registered kmsg dumper
+ *
+ * Reset the dumper's iterator so that kmsg_dump_get_line() and
+ * kmsg_dump_get_buffer() can be called again and used multiple
+ * times within the same dumper.dump() callback.
+ */
+void kmsg_dump_rewind(struct kmsg_dumper *dumper)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&logbuf_lock, flags);
+	dumper->cur_seq = clear_seq;
+	dumper->cur_idx = clear_idx;
+	dumper->next_seq = log_next_seq;
+	dumper->next_idx = log_next_idx;
+	raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_rewind);
 #endif
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 0da7b88..38ecdda 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -1397,6 +1397,8 @@
 	rdp->qlen_lazy += rsp->qlen_lazy;
 	rdp->qlen += rsp->qlen;
 	rdp->n_cbs_adopted += rsp->qlen;
+	if (rsp->qlen_lazy != rsp->qlen)
+		rcu_idle_count_callbacks_posted();
 	rsp->qlen_lazy = 0;
 	rsp->qlen = 0;
 
@@ -1528,7 +1530,7 @@
 {
 	unsigned long flags;
 	struct rcu_head *next, *list, **tail;
-	int bl, count, count_lazy;
+	int bl, count, count_lazy, i;
 
 	/* If no callbacks are ready, just return.*/
 	if (!cpu_has_callbacks_ready_to_invoke(rdp)) {
@@ -1551,9 +1553,9 @@
 	rdp->nxtlist = *rdp->nxttail[RCU_DONE_TAIL];
 	*rdp->nxttail[RCU_DONE_TAIL] = NULL;
 	tail = rdp->nxttail[RCU_DONE_TAIL];
-	for (count = RCU_NEXT_SIZE - 1; count >= 0; count--)
-		if (rdp->nxttail[count] == rdp->nxttail[RCU_DONE_TAIL])
-			rdp->nxttail[count] = &rdp->nxtlist;
+	for (i = RCU_NEXT_SIZE - 1; i >= 0; i--)
+		if (rdp->nxttail[i] == rdp->nxttail[RCU_DONE_TAIL])
+			rdp->nxttail[i] = &rdp->nxtlist;
 	local_irq_restore(flags);
 
 	/* Invoke callbacks. */
@@ -1581,9 +1583,9 @@
 	if (list != NULL) {
 		*tail = rdp->nxtlist;
 		rdp->nxtlist = list;
-		for (count = 0; count < RCU_NEXT_SIZE; count++)
-			if (&rdp->nxtlist == rdp->nxttail[count])
-				rdp->nxttail[count] = tail;
+		for (i = 0; i < RCU_NEXT_SIZE; i++)
+			if (&rdp->nxtlist == rdp->nxttail[i])
+				rdp->nxttail[i] = tail;
 			else
 				break;
 	}
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 7f5d138..ea05649 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -84,6 +84,20 @@
 				    /* Process level is worth LLONG_MAX/2. */
 	int dynticks_nmi_nesting;   /* Track NMI nesting level. */
 	atomic_t dynticks;	    /* Even value for idle, else odd. */
+#ifdef CONFIG_RCU_FAST_NO_HZ
+	int dyntick_drain;	    /* Prepare-for-idle state variable. */
+	unsigned long dyntick_holdoff;
+				    /* No retries for the jiffy of failure. */
+	struct timer_list idle_gp_timer;
+				    /* Wake up CPU sleeping with callbacks. */
+	unsigned long idle_gp_timer_expires;
+				    /* When to wake up CPU (for repost). */
+	bool idle_first_pass;	    /* First pass of attempt to go idle? */
+	unsigned long nonlazy_posted;
+				    /* # times non-lazy CBs posted to CPU. */
+	unsigned long nonlazy_posted_snap;
+				    /* idle-period nonlazy_posted snapshot. */
+#endif /* #ifdef CONFIG_RCU_FAST_NO_HZ */
 };
 
 /* RCU's kthread states for tracing. */
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index 2411000..5271a02 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -1886,8 +1886,9 @@
  * Because we not have RCU_FAST_NO_HZ, just check whether this CPU needs
  * any flavor of RCU.
  */
-int rcu_needs_cpu(int cpu)
+int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
 {
+	*delta_jiffies = ULONG_MAX;
 	return rcu_cpu_has_callbacks(cpu);
 }
 
@@ -1962,41 +1963,6 @@
 #define RCU_IDLE_GP_DELAY 6		/* Roughly one grace period. */
 #define RCU_IDLE_LAZY_GP_DELAY (6 * HZ)	/* Roughly six seconds. */
 
-/* Loop counter for rcu_prepare_for_idle(). */
-static DEFINE_PER_CPU(int, rcu_dyntick_drain);
-/* If rcu_dyntick_holdoff==jiffies, don't try to enter dyntick-idle mode. */
-static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff);
-/* Timer to awaken the CPU if it enters dyntick-idle mode with callbacks. */
-static DEFINE_PER_CPU(struct timer_list, rcu_idle_gp_timer);
-/* Scheduled expiry time for rcu_idle_gp_timer to allow reposting. */
-static DEFINE_PER_CPU(unsigned long, rcu_idle_gp_timer_expires);
-/* Enable special processing on first attempt to enter dyntick-idle mode. */
-static DEFINE_PER_CPU(bool, rcu_idle_first_pass);
-/* Running count of non-lazy callbacks posted, never decremented. */
-static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted);
-/* Snapshot of rcu_nonlazy_posted to detect meaningful exits from idle. */
-static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted_snap);
-
-/*
- * Allow the CPU to enter dyntick-idle mode if either: (1) There are no
- * callbacks on this CPU, (2) this CPU has not yet attempted to enter
- * dyntick-idle mode, or (3) this CPU is in the process of attempting to
- * enter dyntick-idle mode.  Otherwise, if we have recently tried and failed
- * to enter dyntick-idle mode, we refuse to try to enter it.  After all,
- * it is better to incur scheduling-clock interrupts than to spin
- * continuously for the same time duration!
- */
-int rcu_needs_cpu(int cpu)
-{
-	/* Flag a new idle sojourn to the idle-entry state machine. */
-	per_cpu(rcu_idle_first_pass, cpu) = 1;
-	/* If no callbacks, RCU doesn't need the CPU. */
-	if (!rcu_cpu_has_callbacks(cpu))
-		return 0;
-	/* Otherwise, RCU needs the CPU only if it recently tried and failed. */
-	return per_cpu(rcu_dyntick_holdoff, cpu) == jiffies;
-}
-
 /*
  * Does the specified flavor of RCU have non-lazy callbacks pending on
  * the specified CPU?  Both RCU flavor and CPU are specified by the
@@ -2040,6 +2006,47 @@
 }
 
 /*
+ * Allow the CPU to enter dyntick-idle mode if either: (1) There are no
+ * callbacks on this CPU, (2) this CPU has not yet attempted to enter
+ * dyntick-idle mode, or (3) this CPU is in the process of attempting to
+ * enter dyntick-idle mode.  Otherwise, if we have recently tried and failed
+ * to enter dyntick-idle mode, we refuse to try to enter it.  After all,
+ * it is better to incur scheduling-clock interrupts than to spin
+ * continuously for the same time duration!
+ *
+ * The delta_jiffies argument is used to store the time when RCU is
+ * going to need the CPU again if it still has callbacks.  The reason
+ * for this is that rcu_prepare_for_idle() might need to post a timer,
+ * but if so, it will do so after tick_nohz_stop_sched_tick() has set
+ * the wakeup time for this CPU.  This means that RCU's timer can be
+ * delayed until the wakeup time, which defeats the purpose of posting
+ * a timer.
+ */
+int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
+{
+	struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+	/* Flag a new idle sojourn to the idle-entry state machine. */
+	rdtp->idle_first_pass = 1;
+	/* If no callbacks, RCU doesn't need the CPU. */
+	if (!rcu_cpu_has_callbacks(cpu)) {
+		*delta_jiffies = ULONG_MAX;
+		return 0;
+	}
+	if (rdtp->dyntick_holdoff == jiffies) {
+		/* RCU recently tried and failed, so don't try again. */
+		*delta_jiffies = 1;
+		return 1;
+	}
+	/* Set up for the possibility that RCU will post a timer. */
+	if (rcu_cpu_has_nonlazy_callbacks(cpu))
+		*delta_jiffies = RCU_IDLE_GP_DELAY;
+	else
+		*delta_jiffies = RCU_IDLE_LAZY_GP_DELAY;
+	return 0;
+}
+
+/*
  * Handler for smp_call_function_single().  The only point of this
  * handler is to wake the CPU up, so the handler does only tracing.
  */
@@ -2075,21 +2082,24 @@
  */
 static void rcu_prepare_for_idle_init(int cpu)
 {
-	per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1;
-	setup_timer(&per_cpu(rcu_idle_gp_timer, cpu),
-		    rcu_idle_gp_timer_func, cpu);
-	per_cpu(rcu_idle_gp_timer_expires, cpu) = jiffies - 1;
-	per_cpu(rcu_idle_first_pass, cpu) = 1;
+	struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+	rdtp->dyntick_holdoff = jiffies - 1;
+	setup_timer(&rdtp->idle_gp_timer, rcu_idle_gp_timer_func, cpu);
+	rdtp->idle_gp_timer_expires = jiffies - 1;
+	rdtp->idle_first_pass = 1;
 }
 
 /*
  * Clean up for exit from idle.  Because we are exiting from idle, there
- * is no longer any point to rcu_idle_gp_timer, so cancel it.  This will
+ * is no longer any point to ->idle_gp_timer, so cancel it.  This will
  * do nothing if this timer is not active, so just cancel it unconditionally.
  */
 static void rcu_cleanup_after_idle(int cpu)
 {
-	del_timer(&per_cpu(rcu_idle_gp_timer, cpu));
+	struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+	del_timer(&rdtp->idle_gp_timer);
 	trace_rcu_prep_idle("Cleanup after idle");
 }
 
@@ -2108,42 +2118,41 @@
  * Because it is not legal to invoke rcu_process_callbacks() with irqs
  * disabled, we do one pass of force_quiescent_state(), then do a
  * invoke_rcu_core() to cause rcu_process_callbacks() to be invoked
- * later.  The per-cpu rcu_dyntick_drain variable controls the sequencing.
+ * later.  The ->dyntick_drain field controls the sequencing.
  *
  * The caller must have disabled interrupts.
  */
 static void rcu_prepare_for_idle(int cpu)
 {
 	struct timer_list *tp;
+	struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
 
 	/*
 	 * If this is an idle re-entry, for example, due to use of
 	 * RCU_NONIDLE() or the new idle-loop tracing API within the idle
 	 * loop, then don't take any state-machine actions, unless the
 	 * momentary exit from idle queued additional non-lazy callbacks.
-	 * Instead, repost the rcu_idle_gp_timer if this CPU has callbacks
+	 * Instead, repost the ->idle_gp_timer if this CPU has callbacks
 	 * pending.
 	 */
-	if (!per_cpu(rcu_idle_first_pass, cpu) &&
-	    (per_cpu(rcu_nonlazy_posted, cpu) ==
-	     per_cpu(rcu_nonlazy_posted_snap, cpu))) {
+	if (!rdtp->idle_first_pass &&
+	    (rdtp->nonlazy_posted == rdtp->nonlazy_posted_snap)) {
 		if (rcu_cpu_has_callbacks(cpu)) {
-			tp = &per_cpu(rcu_idle_gp_timer, cpu);
-			mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu));
+			tp = &rdtp->idle_gp_timer;
+			mod_timer_pinned(tp, rdtp->idle_gp_timer_expires);
 		}
 		return;
 	}
-	per_cpu(rcu_idle_first_pass, cpu) = 0;
-	per_cpu(rcu_nonlazy_posted_snap, cpu) =
-		per_cpu(rcu_nonlazy_posted, cpu) - 1;
+	rdtp->idle_first_pass = 0;
+	rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted - 1;
 
 	/*
 	 * If there are no callbacks on this CPU, enter dyntick-idle mode.
 	 * Also reset state to avoid prejudicing later attempts.
 	 */
 	if (!rcu_cpu_has_callbacks(cpu)) {
-		per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1;
-		per_cpu(rcu_dyntick_drain, cpu) = 0;
+		rdtp->dyntick_holdoff = jiffies - 1;
+		rdtp->dyntick_drain = 0;
 		trace_rcu_prep_idle("No callbacks");
 		return;
 	}
@@ -2152,36 +2161,37 @@
 	 * If in holdoff mode, just return.  We will presumably have
 	 * refrained from disabling the scheduling-clock tick.
 	 */
-	if (per_cpu(rcu_dyntick_holdoff, cpu) == jiffies) {
+	if (rdtp->dyntick_holdoff == jiffies) {
 		trace_rcu_prep_idle("In holdoff");
 		return;
 	}
 
-	/* Check and update the rcu_dyntick_drain sequencing. */
-	if (per_cpu(rcu_dyntick_drain, cpu) <= 0) {
+	/* Check and update the ->dyntick_drain sequencing. */
+	if (rdtp->dyntick_drain <= 0) {
 		/* First time through, initialize the counter. */
-		per_cpu(rcu_dyntick_drain, cpu) = RCU_IDLE_FLUSHES;
-	} else if (per_cpu(rcu_dyntick_drain, cpu) <= RCU_IDLE_OPT_FLUSHES &&
+		rdtp->dyntick_drain = RCU_IDLE_FLUSHES;
+	} else if (rdtp->dyntick_drain <= RCU_IDLE_OPT_FLUSHES &&
 		   !rcu_pending(cpu) &&
 		   !local_softirq_pending()) {
 		/* Can we go dyntick-idle despite still having callbacks? */
-		trace_rcu_prep_idle("Dyntick with callbacks");
-		per_cpu(rcu_dyntick_drain, cpu) = 0;
-		per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
-		if (rcu_cpu_has_nonlazy_callbacks(cpu))
-			per_cpu(rcu_idle_gp_timer_expires, cpu) =
+		rdtp->dyntick_drain = 0;
+		rdtp->dyntick_holdoff = jiffies;
+		if (rcu_cpu_has_nonlazy_callbacks(cpu)) {
+			trace_rcu_prep_idle("Dyntick with callbacks");
+			rdtp->idle_gp_timer_expires =
 					   jiffies + RCU_IDLE_GP_DELAY;
-		else
-			per_cpu(rcu_idle_gp_timer_expires, cpu) =
+		} else {
+			rdtp->idle_gp_timer_expires =
 					   jiffies + RCU_IDLE_LAZY_GP_DELAY;
-		tp = &per_cpu(rcu_idle_gp_timer, cpu);
-		mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu));
-		per_cpu(rcu_nonlazy_posted_snap, cpu) =
-			per_cpu(rcu_nonlazy_posted, cpu);
+			trace_rcu_prep_idle("Dyntick with lazy callbacks");
+		}
+		tp = &rdtp->idle_gp_timer;
+		mod_timer_pinned(tp, rdtp->idle_gp_timer_expires);
+		rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted;
 		return; /* Nothing more to do immediately. */
-	} else if (--per_cpu(rcu_dyntick_drain, cpu) <= 0) {
+	} else if (--(rdtp->dyntick_drain) <= 0) {
 		/* We have hit the limit, so time to give up. */
-		per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
+		rdtp->dyntick_holdoff = jiffies;
 		trace_rcu_prep_idle("Begin holdoff");
 		invoke_rcu_core();  /* Force the CPU out of dyntick-idle. */
 		return;
@@ -2227,7 +2237,7 @@
  */
 static void rcu_idle_count_callbacks_posted(void)
 {
-	__this_cpu_add(rcu_nonlazy_posted, 1);
+	__this_cpu_add(rcu_dynticks.nonlazy_posted, 1);
 }
 
 #endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */
@@ -2238,11 +2248,12 @@
 
 static void print_cpu_stall_fast_no_hz(char *cp, int cpu)
 {
-	struct timer_list *tltp = &per_cpu(rcu_idle_gp_timer, cpu);
+	struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+	struct timer_list *tltp = &rdtp->idle_gp_timer;
 
 	sprintf(cp, "drain=%d %c timer=%lu",
-		per_cpu(rcu_dyntick_drain, cpu),
-		per_cpu(rcu_dyntick_holdoff, cpu) == jiffies ? 'H' : '.',
+		rdtp->dyntick_drain,
+		rdtp->dyntick_holdoff == jiffies ? 'H' : '.',
 		timer_pending(tltp) ? tltp->expires - jiffies : -1);
 }
 
diff --git a/kernel/relay.c b/kernel/relay.c
index ab56a17..e8cd202 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -1235,6 +1235,7 @@
 	struct splice_pipe_desc spd = {
 		.pages = pages,
 		.nr_pages = 0,
+		.nr_pages_max = PIPE_DEF_BUFFERS,
 		.partial = partial,
 		.flags = flags,
 		.ops = &relay_pipe_buf_ops,
@@ -1302,8 +1303,8 @@
                 ret += padding;
 
 out:
-	splice_shrink_spd(pipe, &spd);
-        return ret;
+	splice_shrink_spd(&spd);
+	return ret;
 }
 
 static ssize_t relay_file_splice_read(struct file *in,
diff --git a/kernel/sys.c b/kernel/sys.c
index f0ec44d..e0c8ffc 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -2127,9 +2127,6 @@
 				else
 					return -EINVAL;
 				break;
-		case PR_GET_TID_ADDRESS:
-			error = prctl_get_tid_address(me, (int __user **)arg2);
-			break;
 			default:
 				return -EINVAL;
 			}
@@ -2147,6 +2144,9 @@
 		case PR_SET_MM:
 			error = prctl_set_mm(arg2, arg3, arg4, arg5);
 			break;
+		case PR_GET_TID_ADDRESS:
+			error = prctl_get_tid_address(me, (int __user **)arg2);
+			break;
 		case PR_SET_CHILD_SUBREAPER:
 			me->signal->is_child_subreaper = !!arg2;
 			error = 0;
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index da70c6d..8699978 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -274,6 +274,7 @@
 static void tick_nohz_stop_sched_tick(struct tick_sched *ts)
 {
 	unsigned long seq, last_jiffies, next_jiffies, delta_jiffies;
+	unsigned long rcu_delta_jiffies;
 	ktime_t last_update, expires, now;
 	struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
 	u64 time_delta;
@@ -322,7 +323,7 @@
 		time_delta = timekeeping_max_deferment();
 	} while (read_seqretry(&xtime_lock, seq));
 
-	if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) ||
+	if (rcu_needs_cpu(cpu, &rcu_delta_jiffies) || printk_needs_cpu(cpu) ||
 	    arch_needs_cpu(cpu)) {
 		next_jiffies = last_jiffies + 1;
 		delta_jiffies = 1;
@@ -330,6 +331,10 @@
 		/* Get the next timer wheel timer */
 		next_jiffies = get_next_timer_interrupt(last_jiffies);
 		delta_jiffies = next_jiffies - last_jiffies;
+		if (rcu_delta_jiffies < delta_jiffies) {
+			next_jiffies = last_jiffies + rcu_delta_jiffies;
+			delta_jiffies = rcu_delta_jiffies;
+		}
 	}
 	/*
 	 * Do not stop the tick, if we are only one off
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 68032c6..a7fa070 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -371,7 +371,7 @@
 void tracing_off(void)
 {
 	if (global_trace.buffer)
-		ring_buffer_record_on(global_trace.buffer);
+		ring_buffer_record_off(global_trace.buffer);
 	/*
 	 * This flag is only looked at when buffers haven't been
 	 * allocated yet. We don't really care about the race
@@ -3609,6 +3609,7 @@
 		.pages		= pages_def,
 		.partial	= partial_def,
 		.nr_pages	= 0, /* This gets updated below. */
+		.nr_pages_max	= PIPE_DEF_BUFFERS,
 		.flags		= flags,
 		.ops		= &tracing_pipe_buf_ops,
 		.spd_release	= tracing_spd_release_pipe,
@@ -3680,7 +3681,7 @@
 
 	ret = splice_to_pipe(pipe, &spd);
 out:
-	splice_shrink_spd(pipe, &spd);
+	splice_shrink_spd(&spd);
 	return ret;
 
 out_err:
@@ -4231,6 +4232,7 @@
 	struct splice_pipe_desc spd = {
 		.pages		= pages_def,
 		.partial	= partial_def,
+		.nr_pages_max	= PIPE_DEF_BUFFERS,
 		.flags		= flags,
 		.ops		= &buffer_pipe_buf_ops,
 		.spd_release	= buffer_spd_release,
@@ -4318,7 +4320,7 @@
 	}
 
 	ret = splice_to_pipe(pipe, &spd);
-	splice_shrink_spd(pipe, &spd);
+	splice_shrink_spd(&spd);
 out:
 	return ret;
 }
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index e5e1d85b..4b1dfba 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -372,6 +372,13 @@
 
 
 #ifdef CONFIG_HARDLOCKUP_DETECTOR
+/*
+ * People like the simple clean cpu node info on boot.
+ * Reduce the watchdog noise by only printing messages
+ * that are different from what cpu0 displayed.
+ */
+static unsigned long cpu0_err;
+
 static int watchdog_nmi_enable(int cpu)
 {
 	struct perf_event_attr *wd_attr;
@@ -390,11 +397,21 @@
 
 	/* Try to register using hardware perf events */
 	event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL);
+
+	/* save cpu0 error for future comparision */
+	if (cpu == 0 && IS_ERR(event))
+		cpu0_err = PTR_ERR(event);
+
 	if (!IS_ERR(event)) {
-		pr_info("enabled, takes one hw-pmu counter.\n");
+		/* only print for cpu0 or different than cpu0 */
+		if (cpu == 0 || cpu0_err)
+			pr_info("enabled on all CPUs, permanently consumes one hw-PMU counter.\n");
 		goto out_save;
 	}
 
+	/* skip displaying the same error again */
+	if (cpu > 0 && (PTR_ERR(event) == cpu0_err))
+		return PTR_ERR(event);
 
 	/* vary the KERN level based on the returned errno */
 	if (PTR_ERR(event) == -EOPNOTSUPP)
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index a42d3ae..ff5bdee 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -241,6 +241,26 @@
 	default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC
 	default 1 if BOOTPARAM_SOFTLOCKUP_PANIC
 
+config PANIC_ON_OOPS
+	bool "Panic on Oops" if EXPERT
+	default n
+	help
+	  Say Y here to enable the kernel to panic when it oopses. This
+	  has the same effect as setting oops=panic on the kernel command
+	  line.
+
+	  This feature is useful to ensure that the kernel does not do
+	  anything erroneous after an oops which could result in data
+	  corruption or other issues.
+
+	  Say N if unsure.
+
+config PANIC_ON_OOPS_VALUE
+	int
+	range 0 1
+	default 0 if !PANIC_ON_OOPS
+	default 1 if PANIC_ON_OOPS
+
 config DETECT_HUNG_TASK
 	bool "Detect Hung Tasks"
 	depends on DEBUG_KERNEL
diff --git a/lib/fault-inject.c b/lib/fault-inject.c
index 6805453..f7210ad 100644
--- a/lib/fault-inject.c
+++ b/lib/fault-inject.c
@@ -101,6 +101,10 @@
 
 bool should_fail(struct fault_attr *attr, ssize_t size)
 {
+	/* No need to check any other properties if the probability is 0 */
+	if (attr->probability == 0)
+		return false;
+
 	if (attr->task_filter && !fail_task(attr, current))
 		return false;
 
diff --git a/lib/spinlock_debug.c b/lib/spinlock_debug.c
index d0ec4f3..e91fbc2 100644
--- a/lib/spinlock_debug.c
+++ b/lib/spinlock_debug.c
@@ -118,7 +118,7 @@
 		/* lockup suspected: */
 		if (print_once) {
 			print_once = 0;
-			spin_dump(lock, "lockup");
+			spin_dump(lock, "lockup suspected");
 #ifdef CONFIG_SMP
 			trigger_all_cpu_backtrace();
 #endif
diff --git a/mm/madvise.c b/mm/madvise.c
index deff1b6..14d260fa 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -15,6 +15,7 @@
 #include <linux/sched.h>
 #include <linux/ksm.h>
 #include <linux/fs.h>
+#include <linux/file.h>
 
 /*
  * Any behaviour which results in changes to the vma->vm_flags needs to
@@ -204,14 +205,16 @@
 {
 	loff_t offset;
 	int error;
+	struct file *f;
 
 	*prev = NULL;	/* tell sys_madvise we drop mmap_sem */
 
 	if (vma->vm_flags & (VM_LOCKED|VM_NONLINEAR|VM_HUGETLB))
 		return -EINVAL;
 
-	if (!vma->vm_file || !vma->vm_file->f_mapping
-		|| !vma->vm_file->f_mapping->host) {
+	f = vma->vm_file;
+
+	if (!f || !f->f_mapping || !f->f_mapping->host) {
 			return -EINVAL;
 	}
 
@@ -221,11 +224,18 @@
 	offset = (loff_t)(start - vma->vm_start)
 			+ ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
 
-	/* filesystem's fallocate may need to take i_mutex */
+	/*
+	 * Filesystem's fallocate may need to take i_mutex.  We need to
+	 * explicitly grab a reference because the vma (and hence the
+	 * vma's reference to the file) can go away as soon as we drop
+	 * mmap_sem.
+	 */
+	get_file(f);
 	up_read(&current->mm->mmap_sem);
-	error = do_fallocate(vma->vm_file,
+	error = do_fallocate(f,
 				FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
 				offset, end - start);
+	fput(f);
 	down_read(&current->mm->mmap_sem);
 	return error;
 }
diff --git a/mm/memblock.c b/mm/memblock.c
index 952123e..d438209 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -184,7 +184,24 @@
 	}
 }
 
-static int __init_memblock memblock_double_array(struct memblock_type *type)
+/**
+ * memblock_double_array - double the size of the memblock regions array
+ * @type: memblock type of the regions array being doubled
+ * @new_area_start: starting address of memory range to avoid overlap with
+ * @new_area_size: size of memory range to avoid overlap with
+ *
+ * Double the size of the @type regions array. If memblock is being used to
+ * allocate memory for a new reserved regions array and there is a previously
+ * allocated memory range [@new_area_start,@new_area_start+@new_area_size]
+ * waiting to be reserved, ensure the memory used by the new array does
+ * not overlap.
+ *
+ * RETURNS:
+ * 0 on success, -1 on failure.
+ */
+static int __init_memblock memblock_double_array(struct memblock_type *type,
+						phys_addr_t new_area_start,
+						phys_addr_t new_area_size)
 {
 	struct memblock_region *new_array, *old_array;
 	phys_addr_t old_size, new_size, addr;
@@ -222,7 +239,18 @@
 		new_array = kmalloc(new_size, GFP_KERNEL);
 		addr = new_array ? __pa(new_array) : 0;
 	} else {
-		addr = memblock_find_in_range(0, MEMBLOCK_ALLOC_ACCESSIBLE, new_size, sizeof(phys_addr_t));
+		/* only exclude range when trying to double reserved.regions */
+		if (type != &memblock.reserved)
+			new_area_start = new_area_size = 0;
+
+		addr = memblock_find_in_range(new_area_start + new_area_size,
+						memblock.current_limit,
+						new_size, sizeof(phys_addr_t));
+		if (!addr && new_area_size)
+			addr = memblock_find_in_range(0,
+					min(new_area_start, memblock.current_limit),
+					new_size, sizeof(phys_addr_t));
+
 		new_array = addr ? __va(addr) : 0;
 	}
 	if (!addr) {
@@ -399,7 +427,7 @@
 	 */
 	if (!insert) {
 		while (type->cnt + nr_new > type->max)
-			if (memblock_double_array(type) < 0)
+			if (memblock_double_array(type, obase, size) < 0)
 				return -ENOMEM;
 		insert = true;
 		goto repeat;
@@ -450,7 +478,7 @@
 
 	/* we'll create at most two more regions */
 	while (type->cnt + 2 > type->max)
-		if (memblock_double_array(type) < 0)
+		if (memblock_double_array(type, base, size) < 0)
 			return -ENOMEM;
 
 	for (i = 0; i < type->cnt; i++) {
@@ -540,9 +568,9 @@
  * __next_free_mem_range - next function for for_each_free_mem_range()
  * @idx: pointer to u64 loop variable
  * @nid: nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
+ * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @out_nid: ptr to int for nid of the range, can be %NULL
  *
  * Find the first free area from *@idx which matches @nid, fill the out
  * parameters, and update *@idx for the next iteration.  The lower 32bit of
@@ -616,9 +644,9 @@
  * __next_free_mem_range_rev - next function for for_each_free_mem_range_reverse()
  * @idx: pointer to u64 loop variable
  * @nid: nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
+ * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @out_nid: ptr to int for nid of the range, can be %NULL
  *
  * Reverse of __next_free_mem_range().
  */
@@ -867,6 +895,16 @@
 	return memblock_search(&memblock.memory, addr) != -1;
 }
 
+/**
+ * memblock_is_region_memory - check if a region is a subset of memory
+ * @base: base of region to check
+ * @size: size of region to check
+ *
+ * Check if the region [@base, @base+@size) is a subset of a memory block.
+ *
+ * RETURNS:
+ * 0 if false, non-zero if true
+ */
 int __init_memblock memblock_is_region_memory(phys_addr_t base, phys_addr_t size)
 {
 	int idx = memblock_search(&memblock.memory, base);
@@ -879,6 +917,16 @@
 		 memblock.memory.regions[idx].size) >= end;
 }
 
+/**
+ * memblock_is_region_reserved - check if a region intersects reserved memory
+ * @base: base of region to check
+ * @size: size of region to check
+ *
+ * Check if the region [@base, @base+@size) intersects a reserved memory block.
+ *
+ * RETURNS:
+ * 0 if false, non-zero if true
+ */
 int __init_memblock memblock_is_region_reserved(phys_addr_t base, phys_addr_t size)
 {
 	memblock_cap_size(base, &size);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index ac35bcc..f72b5e5 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1148,7 +1148,7 @@
 {
 	if (root_memcg == memcg)
 		return true;
-	if (!root_memcg->use_hierarchy)
+	if (!root_memcg->use_hierarchy || !memcg)
 		return false;
 	return css_is_ancestor(&memcg->css, &root_memcg->css);
 }
@@ -1234,7 +1234,7 @@
 
 /**
  * mem_cgroup_margin - calculate chargeable space of a memory cgroup
- * @mem: the memory cgroup
+ * @memcg: the memory cgroup
  *
  * Returns the maximum amount of memory @mem can be charged with, in
  * pages.
@@ -1508,7 +1508,7 @@
 
 /**
  * test_mem_cgroup_node_reclaimable
- * @mem: the target memcg
+ * @memcg: the target memcg
  * @nid: the node ID to be checked.
  * @noswap : specify true here if the user wants flle only information.
  *
diff --git a/mm/memory.c b/mm/memory.c
index 1b7dc66..2466d12 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1225,7 +1225,15 @@
 		next = pmd_addr_end(addr, end);
 		if (pmd_trans_huge(*pmd)) {
 			if (next - addr != HPAGE_PMD_SIZE) {
-				VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem));
+#ifdef CONFIG_DEBUG_VM
+				if (!rwsem_is_locked(&tlb->mm->mmap_sem)) {
+					pr_err("%s: mmap_sem is unlocked! addr=0x%lx end=0x%lx vma->vm_start=0x%lx vma->vm_end=0x%lx\n",
+						__func__, addr, end,
+						vma->vm_start,
+						vma->vm_end);
+					BUG();
+				}
+#endif
 				split_huge_page_pmd(vma->vm_mm, pmd);
 			} else if (zap_huge_pmd(tlb, vma, pmd, addr))
 				goto next;
@@ -1366,7 +1374,7 @@
 /**
  * zap_page_range - remove user pages in a given range
  * @vma: vm_area_struct holding the applicable pages
- * @address: starting address of pages to zap
+ * @start: starting address of pages to zap
  * @size: number of bytes to zap
  * @details: details of nonlinear truncation or shared cache invalidation
  *
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index f15c1b2..1d771e4 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1177,7 +1177,7 @@
 		if (!list_empty(&pagelist)) {
 			nr_failed = migrate_pages(&pagelist, new_vma_page,
 						(unsigned long)vma,
-						false, true);
+						false, MIGRATE_SYNC);
 			if (nr_failed)
 				putback_lru_pages(&pagelist);
 		}
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 416637f..ac300c9 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -184,6 +184,7 @@
 			  const nodemask_t *nodemask, unsigned long totalpages)
 {
 	long points;
+	long adj;
 
 	if (oom_unkillable_task(p, memcg, nodemask))
 		return 0;
@@ -192,7 +193,8 @@
 	if (!p)
 		return 0;
 
-	if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) {
+	adj = p->signal->oom_score_adj;
+	if (adj == OOM_SCORE_ADJ_MIN) {
 		task_unlock(p);
 		return 0;
 	}
@@ -210,14 +212,11 @@
 	 * implementation used by LSMs.
 	 */
 	if (has_capability_noaudit(p, CAP_SYS_ADMIN))
-		points -= 30 * totalpages / 1000;
+		adj -= 30;
 
-	/*
-	 * /proc/pid/oom_score_adj ranges from -1000 to +1000 such that it may
-	 * either completely disable oom killing or always prefer a certain
-	 * task.
-	 */
-	points += p->signal->oom_score_adj * totalpages / 1000;
+	/* Normalize to oom_score_adj units */
+	adj *= totalpages / 1000;
+	points += adj;
 
 	/*
 	 * Never return 0 for an eligible task regardless of the root bonus and
@@ -366,7 +365,7 @@
 
 /**
  * dump_tasks - dump current memory state of all system tasks
- * @mem: current's memory controller, if constrained
+ * @memcg: current's memory controller, if constrained
  * @nodemask: nodemask passed to page allocator for mempolicy ooms
  *
  * Dumps the current memory state of all eligible tasks.  Tasks not in the same
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 1ccbd71..eb750f8 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -392,7 +392,7 @@
 
 /**
  * swap_cgroup_cmpxchg - cmpxchg mem_cgroup's id for this swp_entry.
- * @end: swap entry to be cmpxchged
+ * @ent: swap entry to be cmpxchged
  * @old: old id
  * @new: new id
  *
@@ -422,7 +422,7 @@
 /**
  * swap_cgroup_record - record mem_cgroup for this swp_entry.
  * @ent: swap entry to be recorded into
- * @mem: mem_cgroup to be recorded
+ * @id: mem_cgroup to be recorded
  *
  * Returns old value at success, 0 at failure.
  * (Of course, old value can be 0.)
diff --git a/mm/pagewalk.c b/mm/pagewalk.c
index aa9701e..6c118d0 100644
--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -162,7 +162,6 @@
 
 /**
  * walk_page_range - walk a memory map's page tables with a callback
- * @mm: memory map to walk
  * @addr: starting address
  * @end: ending address
  * @walk: set of callbacks to invoke for each level of the tree
diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c
index 405d331..3707c71 100644
--- a/mm/percpu-vm.c
+++ b/mm/percpu-vm.c
@@ -360,7 +360,6 @@
  * @chunk: chunk to depopulate
  * @off: offset to the area to depopulate
  * @size: size of the area to depopulate in bytes
- * @flush: whether to flush cache and tlb or not
  *
  * For each cpu, depopulate and unmap pages [@page_start,@page_end)
  * from @chunk.  If @flush is true, vcache is flushed before unmapping
diff --git a/mm/shmem.c b/mm/shmem.c
index a15a466..4ce02e0 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1594,6 +1594,7 @@
 	struct splice_pipe_desc spd = {
 		.pages = pages,
 		.partial = partial,
+		.nr_pages_max = PIPE_DEF_BUFFERS,
 		.flags = flags,
 		.ops = &page_cache_pipe_buf_ops,
 		.spd_release = spd_release_page,
@@ -1682,7 +1683,7 @@
 	if (spd.nr_pages)
 		error = splice_to_pipe(pipe, &spd);
 
-	splice_shrink_spd(pipe, &spd);
+	splice_shrink_spd(&spd);
 
 	if (error > 0) {
 		*ppos += error;
diff --git a/mm/swapfile.c b/mm/swapfile.c
index de5bc51..71373d0 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1916,24 +1916,20 @@
 
 	/*
 	 * Find out how many pages are allowed for a single swap
-	 * device. There are three limiting factors: 1) the number
+	 * device. There are two limiting factors: 1) the number
 	 * of bits for the swap offset in the swp_entry_t type, and
 	 * 2) the number of bits in the swap pte as defined by the
-	 * the different architectures, and 3) the number of free bits
-	 * in an exceptional radix_tree entry. In order to find the
+	 * different architectures. In order to find the
 	 * largest possible bit mask, a swap entry with swap type 0
 	 * and swap offset ~0UL is created, encoded to a swap pte,
 	 * decoded to a swp_entry_t again, and finally the swap
 	 * offset is extracted. This will mask all the bits from
 	 * the initial ~0UL mask that can't be encoded in either
 	 * the swp_entry_t or the architecture definition of a
-	 * swap pte.  Then the same is done for a radix_tree entry.
+	 * swap pte.
 	 */
 	maxpages = swp_offset(pte_to_swp_entry(
-			swp_entry_to_pte(swp_entry(0, ~0UL))));
-	maxpages = swp_offset(radix_to_swp_entry(
-			swp_to_radix_entry(swp_entry(0, maxpages)))) + 1;
-
+			swp_entry_to_pte(swp_entry(0, ~0UL)))) + 1;
 	if (maxpages > swap_header->info.last_page) {
 		maxpages = swap_header->info.last_page + 1;
 		/* p->max is an unsigned int: don't overflow it */
diff --git a/net/9p/protocol.c b/net/9p/protocol.c
index 9ee48cb..3d33ecf 100644
--- a/net/9p/protocol.c
+++ b/net/9p/protocol.c
@@ -368,7 +368,7 @@
 				const char *sptr = va_arg(ap, const char *);
 				uint16_t len = 0;
 				if (sptr)
-					len = min_t(uint16_t, strlen(sptr),
+					len = min_t(size_t, strlen(sptr),
 								USHRT_MAX);
 
 				errcode = p9pdu_writef(pdu, proto_version,
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index 5af18d1..2a16765 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -192,10 +192,10 @@
 		s = rest_of_page(data);
 		if (s > count)
 			s = count;
+		BUG_ON(index > limit);
 		sg_set_buf(&sg[index++], data, s);
 		count -= s;
 		data += s;
-		BUG_ON(index > limit);
 	}
 
 	return index-start;
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 0301b32..8685296 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -1208,9 +1208,7 @@
 	if (addr->sat_addr.s_node == ATADDR_BCAST &&
 	    !sock_flag(sk, SOCK_BROADCAST)) {
 #if 1
-		printk(KERN_WARNING "%s is broken and did not set "
-				    "SO_BROADCAST. It will break when 2.2 is "
-				    "released.\n",
+		pr_warn("atalk_connect: %s is broken and did not set SO_BROADCAST.\n",
 			current->comm);
 #else
 		return -EACCES;
diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c
index 840e2c6..015471d 100644
--- a/net/batman-adv/routing.c
+++ b/net/batman-adv/routing.c
@@ -617,6 +617,8 @@
 			 * changes */
 			if (skb_linearize(skb) < 0)
 				goto out;
+			/* skb_linearize() possibly changed skb->data */
+			tt_query = (struct tt_query_packet *)skb->data;
 
 			tt_len = tt_query->tt_data * sizeof(struct tt_change);
 
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index a66c2dc..2ab83d7 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -141,13 +141,14 @@
 	struct tt_orig_list_entry *orig_entry;
 
 	orig_entry = container_of(rcu, struct tt_orig_list_entry, rcu);
-	atomic_dec(&orig_entry->orig_node->tt_size);
 	orig_node_free_ref(orig_entry->orig_node);
 	kfree(orig_entry);
 }
 
 static void tt_orig_list_entry_free_ref(struct tt_orig_list_entry *orig_entry)
 {
+	/* to avoid race conditions, immediately decrease the tt counter */
+	atomic_dec(&orig_entry->orig_node->tt_size);
 	call_rcu(&orig_entry->rcu, tt_orig_list_entry_free_rcu);
 }
 
@@ -910,7 +911,6 @@
 		}
 		spin_unlock_bh(list_lock);
 	}
-	atomic_set(&orig_node->tt_size, 0);
 	orig_node->tt_initialised = false;
 }
 
@@ -2031,10 +2031,10 @@
 {
 	struct tt_local_entry *tt_local_entry = NULL;
 	struct tt_global_entry *tt_global_entry = NULL;
-	bool ret = true;
+	bool ret = false;
 
 	if (!atomic_read(&bat_priv->ap_isolation))
-		return false;
+		goto out;
 
 	tt_local_entry = tt_local_hash_find(bat_priv, dst);
 	if (!tt_local_entry)
@@ -2044,10 +2044,10 @@
 	if (!tt_global_entry)
 		goto out;
 
-	if (_is_ap_isolated(tt_local_entry, tt_global_entry))
+	if (!_is_ap_isolated(tt_local_entry, tt_global_entry))
 		goto out;
 
-	ret = false;
+	ret = true;
 
 out:
 	if (tt_global_entry)
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 46e7f86..3e18af4 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -210,7 +210,7 @@
 		}
 
 		if (sk->sk_state == BT_CONNECTED || !newsock ||
-		    test_bit(BT_DEFER_SETUP, &bt_sk(parent)->flags)) {
+		    test_bit(BT_SK_DEFER_SETUP, &bt_sk(parent)->flags)) {
 			bt_accept_unlink(sk);
 			if (newsock)
 				sock_graft(sk, newsock);
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 4eefb7f..94ad124 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3043,6 +3043,50 @@
 	hci_dev_unlock(hdev);
 }
 
+static void hci_key_refresh_complete_evt(struct hci_dev *hdev,
+					 struct sk_buff *skb)
+{
+	struct hci_ev_key_refresh_complete *ev = (void *) skb->data;
+	struct hci_conn *conn;
+
+	BT_DBG("%s status %u handle %u", hdev->name, ev->status,
+	       __le16_to_cpu(ev->handle));
+
+	hci_dev_lock(hdev);
+
+	conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
+	if (!conn)
+		goto unlock;
+
+	if (!ev->status)
+		conn->sec_level = conn->pending_sec_level;
+
+	clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
+
+	if (ev->status && conn->state == BT_CONNECTED) {
+		hci_acl_disconn(conn, HCI_ERROR_AUTH_FAILURE);
+		hci_conn_put(conn);
+		goto unlock;
+	}
+
+	if (conn->state == BT_CONFIG) {
+		if (!ev->status)
+			conn->state = BT_CONNECTED;
+
+		hci_proto_connect_cfm(conn, ev->status);
+		hci_conn_put(conn);
+	} else {
+		hci_auth_cfm(conn, ev->status);
+
+		hci_conn_hold(conn);
+		conn->disc_timeout = HCI_DISCONN_TIMEOUT;
+		hci_conn_put(conn);
+	}
+
+unlock:
+	hci_dev_unlock(hdev);
+}
+
 static inline u8 hci_get_auth_req(struct hci_conn *conn)
 {
 	/* If remote requests dedicated bonding follow that lead */
@@ -3559,6 +3603,10 @@
 		hci_extended_inquiry_result_evt(hdev, skb);
 		break;
 
+	case HCI_EV_KEY_REFRESH_COMPLETE:
+		hci_key_refresh_complete_evt(hdev, skb);
+		break;
+
 	case HCI_EV_IO_CAPA_REQUEST:
 		hci_io_capa_request_evt(hdev, skb);
 		break;
diff --git a/net/bluetooth/hidp/Kconfig b/net/bluetooth/hidp/Kconfig
index 4deaca7..9332bc7 100644
--- a/net/bluetooth/hidp/Kconfig
+++ b/net/bluetooth/hidp/Kconfig
@@ -1,6 +1,6 @@
 config BT_HIDP
 	tristate "HIDP protocol support"
-	depends on BT && INPUT && HID_SUPPORT
+	depends on BT && INPUT
 	select HID
 	help
 	  HIDP (Human Interface Device Protocol) is a transport layer
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 24f144b..4554e80 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1295,7 +1295,12 @@
 	struct l2cap_conn *conn = container_of(work, struct l2cap_conn,
 						security_timer.work);
 
-	l2cap_conn_del(conn->hcon, ETIMEDOUT);
+	BT_DBG("conn %p", conn);
+
+	if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags)) {
+		smp_chan_destroy(conn);
+		l2cap_conn_del(conn->hcon, ETIMEDOUT);
+	}
 }
 
 static struct l2cap_conn *l2cap_conn_add(struct hci_conn *hcon, u8 status)
@@ -2910,12 +2915,14 @@
 	while (len >= L2CAP_CONF_OPT_SIZE) {
 		len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
 
-		switch (type) {
-		case L2CAP_CONF_RFC:
-			if (olen == sizeof(rfc))
-				memcpy(&rfc, (void *)val, olen);
-			goto done;
-		}
+		if (type != L2CAP_CONF_RFC)
+			continue;
+
+		if (olen != sizeof(rfc))
+			break;
+
+		memcpy(&rfc, (void *)val, olen);
+		goto done;
 	}
 
 	/* Use sane default values in case a misbehaving remote device
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 25d2207..3e5e336 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -1598,7 +1598,7 @@
 	else
 		conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, &cp->addr.bdaddr);
 
-	if (!conn) {
+	if (!conn || conn->state == BT_OPEN || conn->state == BT_CLOSED) {
 		err = cmd_status(sk, hdev->id, MGMT_OP_DISCONNECT,
 				 MGMT_STATUS_NOT_CONNECTED);
 		goto failed;
@@ -1873,6 +1873,22 @@
 		pairing_complete(cmd, mgmt_status(status));
 }
 
+static void le_connect_complete_cb(struct hci_conn *conn, u8 status)
+{
+	struct pending_cmd *cmd;
+
+	BT_DBG("status %u", status);
+
+	if (!status)
+		return;
+
+	cmd = find_pairing(conn);
+	if (!cmd)
+		BT_DBG("Unable to find a pending command");
+	else
+		pairing_complete(cmd, mgmt_status(status));
+}
+
 static int pair_device(struct sock *sk, struct hci_dev *hdev, void *data,
 		       u16 len)
 {
@@ -1934,6 +1950,8 @@
 	/* For LE, just connecting isn't a proof that the pairing finished */
 	if (cp->addr.type == BDADDR_BREDR)
 		conn->connect_cfm_cb = pairing_complete_cb;
+	else
+		conn->connect_cfm_cb = le_connect_complete_cb;
 
 	conn->security_cfm_cb = pairing_complete_cb;
 	conn->disconn_cfm_cb = pairing_complete_cb;
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index 6fc7c47..37df4e9 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -648,7 +648,7 @@
 
 	auth |= (req->auth_req | rsp->auth_req) & SMP_AUTH_MITM;
 
-	ret = tk_request(conn, 0, auth, rsp->io_capability, req->io_capability);
+	ret = tk_request(conn, 0, auth, req->io_capability, rsp->io_capability);
 	if (ret)
 		return SMP_UNSPECIFIED;
 
@@ -703,7 +703,7 @@
 	return 0;
 }
 
-static u8 smp_ltk_encrypt(struct l2cap_conn *conn)
+static u8 smp_ltk_encrypt(struct l2cap_conn *conn, u8 sec_level)
 {
 	struct smp_ltk *key;
 	struct hci_conn *hcon = conn->hcon;
@@ -712,6 +712,9 @@
 	if (!key)
 		return 0;
 
+	if (sec_level > BT_SECURITY_MEDIUM && !key->authenticated)
+		return 0;
+
 	if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &hcon->flags))
 		return 1;
 
@@ -732,7 +735,7 @@
 
 	hcon->pending_sec_level = authreq_to_seclevel(rp->auth_req);
 
-	if (smp_ltk_encrypt(conn))
+	if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
 		return 0;
 
 	if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags))
@@ -771,7 +774,7 @@
 		return 1;
 
 	if (hcon->link_mode & HCI_LM_MASTER)
-		if (smp_ltk_encrypt(conn))
+		if (smp_ltk_encrypt(conn, sec_level))
 			goto done;
 
 	if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags))
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 0a942fb..e1144e1 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -240,6 +240,7 @@
 		return -ENOMEM;
 
 	dev_net_set(dev, net);
+	dev->rtnl_link_ops = &br_link_ops;
 
 	res = register_netdev(dev);
 	if (res)
diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index 2080485..fe41260 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -208,7 +208,7 @@
 	return 0;
 }
 
-static struct rtnl_link_ops br_link_ops __read_mostly = {
+struct rtnl_link_ops br_link_ops __read_mostly = {
 	.kind		= "bridge",
 	.priv_size	= sizeof(struct net_bridge),
 	.setup		= br_dev_setup,
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 1a8ad4f..a768b24 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -549,6 +549,7 @@
 #endif
 
 /* br_netlink.c */
+extern struct rtnl_link_ops br_link_ops;
 extern int br_netlink_init(void);
 extern void br_netlink_fini(void);
 extern void br_ifinfo_notify(int event, struct net_bridge_port *port);
diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c
index aa6f716..554b312 100644
--- a/net/caif/caif_dev.c
+++ b/net/caif/caif_dev.c
@@ -4,8 +4,7 @@
  * Author:	Sjur Brendeland/sjur.brandeland@stericsson.com
  * License terms: GNU General Public License (GPL) version 2
  *
- * Borrowed heavily from file: pn_dev.c. Thanks to
- *  Remi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Borrowed heavily from file: pn_dev.c. Thanks to Remi Denis-Courmont
  *  and Sakari Ailus <sakari.ailus@nokia.com>
  */
 
diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c
index fb89443..78f1cda 100644
--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -220,6 +220,7 @@
 						cfsk_hold, cfsk_put);
 		cf_sk->sk.sk_state = CAIF_CONNECTED;
 		set_tx_flow_on(cf_sk);
+		cf_sk->sk.sk_shutdown = 0;
 		cf_sk->sk.sk_state_change(&cf_sk->sk);
 		break;
 
diff --git a/net/can/raw.c b/net/can/raw.c
index cde1b4a..46cca3a 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -681,9 +681,6 @@
 	if (err < 0)
 		goto free_skb;
 
-	/* to be able to check the received tx sock reference in raw_rcv() */
-	skb_shinfo(skb)->tx_flags |= SKBTX_DRV_NEEDS_SK_REF;
-
 	skb->dev = dev;
 	skb->sk  = sk;
 
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index a776f75..ba4323b 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -504,13 +504,6 @@
 	/* unmount */
 	ceph_osdc_stop(&client->osdc);
 
-	/*
-	 * make sure osd connections close out before destroying the
-	 * auth module, which is needed to free those connections'
-	 * ceph_authorizers.
-	 */
-	ceph_msgr_flush();
-
 	ceph_monc_stop(&client->monc);
 
 	ceph_debugfs_client_cleanup(client);
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 524f4e4..b332c3d 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -563,6 +563,10 @@
 		m->hdr.seq = cpu_to_le64(++con->out_seq);
 		m->needs_out_seq = false;
 	}
+#ifdef CONFIG_BLOCK
+	else
+		m->bio_iter = NULL;
+#endif
 
 	dout("prepare_write_message %p seq %lld type %d len %d+%d+%d %d pgs\n",
 	     m, con->out_seq, le16_to_cpu(m->hdr.type),
diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c
index 10d6008..d0649a9 100644
--- a/net/ceph/mon_client.c
+++ b/net/ceph/mon_client.c
@@ -847,6 +847,14 @@
 
 	mutex_unlock(&monc->mutex);
 
+	/*
+	 * flush msgr queue before we destroy ourselves to ensure that:
+	 *  - any work that references our embedded con is finished.
+	 *  - any osd_client or other work that may reference an authorizer
+	 *    finishes before we shut down the auth subsystem.
+	 */
+	ceph_msgr_flush();
+
 	ceph_auth_destroy(monc->auth);
 
 	ceph_msg_put(monc->m_auth);
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 1ffebed..ca59e66 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -139,15 +139,15 @@
 
 	if (req->r_request)
 		ceph_msg_put(req->r_request);
-	if (req->r_reply)
-		ceph_msg_put(req->r_reply);
 	if (req->r_con_filling_msg) {
 		dout("release_request revoking pages %p from con %p\n",
 		     req->r_pages, req->r_con_filling_msg);
 		ceph_con_revoke_message(req->r_con_filling_msg,
 				      req->r_reply);
-		ceph_con_put(req->r_con_filling_msg);
+		req->r_con_filling_msg->ops->put(req->r_con_filling_msg);
 	}
+	if (req->r_reply)
+		ceph_msg_put(req->r_reply);
 	if (req->r_own_pages)
 		ceph_release_page_vector(req->r_pages,
 					 req->r_num_pages);
@@ -1216,7 +1216,7 @@
 	if (req->r_con_filling_msg == con && req->r_reply == msg) {
 		dout(" dropping con_filling_msg ref %p\n", con);
 		req->r_con_filling_msg = NULL;
-		ceph_con_put(con);
+		con->ops->put(con);
 	}
 
 	if (!req->r_got_reply) {
@@ -2028,7 +2028,7 @@
 		dout("get_reply revoking msg %p from old con %p\n",
 		     req->r_reply, req->r_con_filling_msg);
 		ceph_con_revoke_message(req->r_con_filling_msg, req->r_reply);
-		ceph_con_put(req->r_con_filling_msg);
+		req->r_con_filling_msg->ops->put(req->r_con_filling_msg);
 		req->r_con_filling_msg = NULL;
 	}
 
@@ -2063,7 +2063,7 @@
 #endif
 	}
 	*skip = 0;
-	req->r_con_filling_msg = ceph_con_get(con);
+	req->r_con_filling_msg = con->ops->get(con);
 	dout("get_reply tid %lld %p\n", tid, m);
 
 out:
diff --git a/net/core/dev.c b/net/core/dev.c
index cd09819..84f01ba 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1136,8 +1136,8 @@
 		no_module = request_module("netdev-%s", name);
 	if (no_module && capable(CAP_SYS_MODULE)) {
 		if (!request_module("%s", name))
-			pr_err("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev-%s instead.\n",
-			       name);
+			pr_warn("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev-%s instead.\n",
+				name);
 	}
 }
 EXPORT_SYMBOL(dev_load);
@@ -2089,25 +2089,6 @@
 	return 0;
 }
 
-/*
- * Try to orphan skb early, right before transmission by the device.
- * We cannot orphan skb if tx timestamp is requested or the sk-reference
- * is needed on driver level for other reasons, e.g. see net/can/raw.c
- */
-static inline void skb_orphan_try(struct sk_buff *skb)
-{
-	struct sock *sk = skb->sk;
-
-	if (sk && !skb_shinfo(skb)->tx_flags) {
-		/* skb_tx_hash() wont be able to get sk.
-		 * We copy sk_hash into skb->rxhash
-		 */
-		if (!skb->rxhash)
-			skb->rxhash = sk->sk_hash;
-		skb_orphan(skb);
-	}
-}
-
 static bool can_checksum_protocol(netdev_features_t features, __be16 protocol)
 {
 	return ((features & NETIF_F_GEN_CSUM) ||
@@ -2193,8 +2174,6 @@
 		if (!list_empty(&ptype_all))
 			dev_queue_xmit_nit(skb, dev);
 
-		skb_orphan_try(skb);
-
 		features = netif_skb_features(skb);
 
 		if (vlan_tx_tag_present(skb) &&
@@ -2304,7 +2283,7 @@
 	if (skb->sk && skb->sk->sk_hash)
 		hash = skb->sk->sk_hash;
 	else
-		hash = (__force u16) skb->protocol ^ skb->rxhash;
+		hash = (__force u16) skb->protocol;
 	hash = jhash_1word(hash, hashrnd);
 
 	return (u16) (((u64) hash * qcount) >> 32) + qoffset;
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index ea5fb9f..d23b668 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -36,9 +36,6 @@
 #define TRACE_ON 1
 #define TRACE_OFF 0
 
-static void send_dm_alert(struct work_struct *unused);
-
-
 /*
  * Globals, our netlink socket pointer
  * and the work handle that will send up
@@ -48,11 +45,10 @@
 static DEFINE_MUTEX(trace_state_mutex);
 
 struct per_cpu_dm_data {
-	struct work_struct dm_alert_work;
-	struct sk_buff __rcu *skb;
-	atomic_t dm_hit_count;
-	struct timer_list send_timer;
-	int cpu;
+	spinlock_t		lock;
+	struct sk_buff		*skb;
+	struct work_struct	dm_alert_work;
+	struct timer_list	send_timer;
 };
 
 struct dm_hw_stat_delta {
@@ -78,13 +74,13 @@
 static unsigned long dm_hw_check_delta = 2*HZ;
 static LIST_HEAD(hw_stats_list);
 
-static void reset_per_cpu_data(struct per_cpu_dm_data *data)
+static struct sk_buff *reset_per_cpu_data(struct per_cpu_dm_data *data)
 {
 	size_t al;
 	struct net_dm_alert_msg *msg;
 	struct nlattr *nla;
 	struct sk_buff *skb;
-	struct sk_buff *oskb = rcu_dereference_protected(data->skb, 1);
+	unsigned long flags;
 
 	al = sizeof(struct net_dm_alert_msg);
 	al += dm_hit_limit * sizeof(struct net_dm_drop_point);
@@ -99,65 +95,40 @@
 				  sizeof(struct net_dm_alert_msg));
 		msg = nla_data(nla);
 		memset(msg, 0, al);
-	} else
-		schedule_work_on(data->cpu, &data->dm_alert_work);
-
-	/*
-	 * Don't need to lock this, since we are guaranteed to only
-	 * run this on a single cpu at a time.
-	 * Note also that we only update data->skb if the old and new skb
-	 * pointers don't match.  This ensures that we don't continually call
-	 * synchornize_rcu if we repeatedly fail to alloc a new netlink message.
-	 */
-	if (skb != oskb) {
-		rcu_assign_pointer(data->skb, skb);
-
-		synchronize_rcu();
-
-		atomic_set(&data->dm_hit_count, dm_hit_limit);
+	} else {
+		mod_timer(&data->send_timer, jiffies + HZ / 10);
 	}
 
+	spin_lock_irqsave(&data->lock, flags);
+	swap(data->skb, skb);
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return skb;
 }
 
-static void send_dm_alert(struct work_struct *unused)
+static void send_dm_alert(struct work_struct *work)
 {
 	struct sk_buff *skb;
-	struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data);
+	struct per_cpu_dm_data *data;
 
-	WARN_ON_ONCE(data->cpu != smp_processor_id());
+	data = container_of(work, struct per_cpu_dm_data, dm_alert_work);
 
-	/*
-	 * Grab the skb we're about to send
-	 */
-	skb = rcu_dereference_protected(data->skb, 1);
+	skb = reset_per_cpu_data(data);
 
-	/*
-	 * Replace it with a new one
-	 */
-	reset_per_cpu_data(data);
-
-	/*
-	 * Ship it!
-	 */
 	if (skb)
 		genlmsg_multicast(skb, 0, NET_DM_GRP_ALERT, GFP_KERNEL);
-
-	put_cpu_var(dm_cpu_data);
 }
 
 /*
  * This is the timer function to delay the sending of an alert
  * in the event that more drops will arrive during the
- * hysteresis period.  Note that it operates under the timer interrupt
- * so we don't need to disable preemption here
+ * hysteresis period.
  */
-static void sched_send_work(unsigned long unused)
+static void sched_send_work(unsigned long _data)
 {
-	struct per_cpu_dm_data *data =  &get_cpu_var(dm_cpu_data);
+	struct per_cpu_dm_data *data = (struct per_cpu_dm_data *)_data;
 
-	schedule_work_on(smp_processor_id(), &data->dm_alert_work);
-
-	put_cpu_var(dm_cpu_data);
+	schedule_work(&data->dm_alert_work);
 }
 
 static void trace_drop_common(struct sk_buff *skb, void *location)
@@ -167,33 +138,28 @@
 	struct nlattr *nla;
 	int i;
 	struct sk_buff *dskb;
-	struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data);
+	struct per_cpu_dm_data *data;
+	unsigned long flags;
 
-
-	rcu_read_lock();
-	dskb = rcu_dereference(data->skb);
+	local_irq_save(flags);
+	data = &__get_cpu_var(dm_cpu_data);
+	spin_lock(&data->lock);
+	dskb = data->skb;
 
 	if (!dskb)
 		goto out;
 
-	if (!atomic_add_unless(&data->dm_hit_count, -1, 0)) {
-		/*
-		 * we're already at zero, discard this hit
-		 */
-		goto out;
-	}
-
 	nlh = (struct nlmsghdr *)dskb->data;
 	nla = genlmsg_data(nlmsg_data(nlh));
 	msg = nla_data(nla);
 	for (i = 0; i < msg->entries; i++) {
 		if (!memcmp(&location, msg->points[i].pc, sizeof(void *))) {
 			msg->points[i].count++;
-			atomic_inc(&data->dm_hit_count);
 			goto out;
 		}
 	}
-
+	if (msg->entries == dm_hit_limit)
+		goto out;
 	/*
 	 * We need to create a new entry
 	 */
@@ -205,13 +171,11 @@
 
 	if (!timer_pending(&data->send_timer)) {
 		data->send_timer.expires = jiffies + dm_delay * HZ;
-		add_timer_on(&data->send_timer, smp_processor_id());
+		add_timer(&data->send_timer);
 	}
 
 out:
-	rcu_read_unlock();
-	put_cpu_var(dm_cpu_data);
-	return;
+	spin_unlock_irqrestore(&data->lock, flags);
 }
 
 static void trace_kfree_skb_hit(void *ignore, struct sk_buff *skb, void *location)
@@ -418,11 +382,11 @@
 
 	for_each_possible_cpu(cpu) {
 		data = &per_cpu(dm_cpu_data, cpu);
-		data->cpu = cpu;
 		INIT_WORK(&data->dm_alert_work, send_dm_alert);
 		init_timer(&data->send_timer);
-		data->send_timer.data = cpu;
+		data->send_timer.data = (unsigned long)data;
 		data->send_timer.function = sched_send_work;
+		spin_lock_init(&data->lock);
 		reset_per_cpu_data(data);
 	}
 
diff --git a/net/core/filter.c b/net/core/filter.c
index a3eddb5..d4ce2dc 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -616,9 +616,9 @@
 /**
  *	sk_unattached_filter_create - create an unattached filter
  *	@fprog: the filter program
- *	@sk: the socket to use
+ *	@pfp: the unattached filter that is created
  *
- * Create a filter independent ofr any socket. We first run some
+ * Create a filter independent of any socket. We first run some
  * sanity checks on it to make sure it does not explode on us later.
  * If an error occurs or there is insufficient memory for the filter
  * a negative errno code is returned. On success the return is zero.
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index eb09f8b..d81d026 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -2219,9 +2219,7 @@
 	rcu_read_lock_bh();
 	nht = rcu_dereference_bh(tbl->nht);
 
-	for (h = 0; h < (1 << nht->hash_shift); h++) {
-		if (h < s_h)
-			continue;
+	for (h = s_h; h < (1 << nht->hash_shift); h++) {
 		if (h > s_h)
 			s_idx = 0;
 		for (n = rcu_dereference_bh(nht->hash_buckets[h]), idx = 0;
@@ -2260,9 +2258,7 @@
 
 	read_lock_bh(&tbl->lock);
 
-	for (h = 0; h <= PNEIGH_HASHMASK; h++) {
-		if (h < s_h)
-			continue;
+	for (h = s_h; h <= PNEIGH_HASHMASK; h++) {
 		if (h > s_h)
 			s_idx = 0;
 		for (n = tbl->phash_buckets[h], idx = 0; n; n = n->next) {
@@ -2297,7 +2293,7 @@
 	struct neigh_table *tbl;
 	int t, family, s_t;
 	int proxy = 0;
-	int err = 0;
+	int err;
 
 	read_lock(&neigh_tbl_lock);
 	family = ((struct rtgenmsg *) nlmsg_data(cb->nlh))->rtgen_family;
@@ -2311,7 +2307,7 @@
 
 	s_t = cb->args[0];
 
-	for (tbl = neigh_tables, t = 0; tbl && (err >= 0);
+	for (tbl = neigh_tables, t = 0; tbl;
 	     tbl = tbl->next, t++) {
 		if (t < s_t || (family && tbl->family != family))
 			continue;
@@ -2322,6 +2318,8 @@
 			err = pneigh_dump_table(tbl, skb, cb);
 		else
 			err = neigh_dump_table(tbl, skb, cb);
+		if (err < 0)
+			break;
 	}
 	read_unlock(&neigh_tbl_lock);
 
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 3d84fb9..f9f40b9 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -362,22 +362,23 @@
 
 void netpoll_send_udp(struct netpoll *np, const char *msg, int len)
 {
-	int total_len, eth_len, ip_len, udp_len;
+	int total_len, ip_len, udp_len;
 	struct sk_buff *skb;
 	struct udphdr *udph;
 	struct iphdr *iph;
 	struct ethhdr *eth;
 
 	udp_len = len + sizeof(*udph);
-	ip_len = eth_len = udp_len + sizeof(*iph);
-	total_len = eth_len + ETH_HLEN + NET_IP_ALIGN;
+	ip_len = udp_len + sizeof(*iph);
+	total_len = ip_len + LL_RESERVED_SPACE(np->dev);
 
-	skb = find_skb(np, total_len, total_len - len);
+	skb = find_skb(np, total_len + np->dev->needed_tailroom,
+		       total_len - len);
 	if (!skb)
 		return;
 
 	skb_copy_to_linear_data(skb, msg, len);
-	skb->len += len;
+	skb_put(skb, len);
 
 	skb_push(skb, sizeof(*udph));
 	skb_reset_transport_header(skb);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 016694d..46a3d23 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -1755,6 +1755,7 @@
 	struct splice_pipe_desc spd = {
 		.pages = pages,
 		.partial = partial,
+		.nr_pages_max = MAX_SKB_FRAGS,
 		.flags = flags,
 		.ops = &sock_pipe_buf_ops,
 		.spd_release = sock_spd_release,
@@ -3361,7 +3362,7 @@
  * @to: prior buffer
  * @from: buffer to add
  * @fragstolen: pointer to boolean
- *
+ * @delta_truesize: how much more was allocated than was requested
  */
 bool skb_try_coalesce(struct sk_buff *to, struct sk_buff *from,
 		      bool *fragstolen, int *delta_truesize)
diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c
index d4d61b6..dfba343 100644
--- a/net/ipv4/inetpeer.c
+++ b/net/ipv4/inetpeer.c
@@ -560,6 +560,17 @@
 }
 EXPORT_SYMBOL(inet_peer_xrlim_allow);
 
+static void inetpeer_inval_rcu(struct rcu_head *head)
+{
+	struct inet_peer *p = container_of(head, struct inet_peer, gc_rcu);
+
+	spin_lock_bh(&gc_lock);
+	list_add_tail(&p->gc_list, &gc_list);
+	spin_unlock_bh(&gc_lock);
+
+	schedule_delayed_work(&gc_work, gc_delay);
+}
+
 void inetpeer_invalidate_tree(int family)
 {
 	struct inet_peer *old, *new, *prev;
@@ -576,10 +587,7 @@
 	prev = cmpxchg(&base->root, old, new);
 	if (prev == old) {
 		base->total = 0;
-		spin_lock(&gc_lock);
-		list_add_tail(&prev->gc_list, &gc_list);
-		spin_unlock(&gc_lock);
-		schedule_delayed_work(&gc_work, gc_delay);
+		call_rcu(&prev->gc_rcu, inetpeer_inval_rcu);
 	}
 
 out:
diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c
index e5c44fc..ab09b12 100644
--- a/net/ipv4/ip_forward.c
+++ b/net/ipv4/ip_forward.c
@@ -44,6 +44,7 @@
 	struct ip_options *opt	= &(IPCB(skb)->opt);
 
 	IP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
+	IP_ADD_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTOCTETS, skb->len);
 
 	if (unlikely(opt->optlen))
 		ip_forward_options(skb);
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index a9e519a..c94bbc6 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -1574,6 +1574,7 @@
 	struct ip_options *opt = &(IPCB(skb)->opt);
 
 	IP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
+	IP_ADD_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTOCTETS, skb->len);
 
 	if (unlikely(opt->optlen))
 		ip_forward_options(skb);
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 0c220a4..6083276 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1349,8 +1349,8 @@
 			if (w->leaf && fn->fn_flags & RTN_RTINFO) {
 				int err;
 
-				if (w->count < w->skip) {
-					w->count++;
+				if (w->skip) {
+					w->skip--;
 					continue;
 				}
 
@@ -1561,7 +1561,7 @@
 				neigh_flags = neigh->flags;
 				neigh_release(neigh);
 			}
-			if (neigh_flags & NTF_ROUTER) {
+			if (!(neigh_flags & NTF_ROUTER)) {
 				RT6_TRACE("purging route %p via non-router but gateway\n",
 					  rt);
 				return -1;
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 17b8c67..decc21d1 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -526,6 +526,7 @@
 	hdr->hop_limit--;
 
 	IP6_INC_STATS_BH(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTFORWDATAGRAMS);
+	IP6_ADD_STATS_BH(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTOCTETS, skb->len);
 	return NF_HOOK(NFPROTO_IPV6, NF_INET_FORWARD, skb, skb->dev, dst->dev,
 		       ip6_forward_finish);
 
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index b15dc08..461e47c 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -1886,6 +1886,8 @@
 {
 	IP6_INC_STATS_BH(dev_net(skb_dst(skb)->dev), ip6_dst_idev(skb_dst(skb)),
 			 IPSTATS_MIB_OUTFORWDATAGRAMS);
+	IP6_ADD_STATS_BH(dev_net(skb_dst(skb)->dev), ip6_dst_idev(skb_dst(skb)),
+			 IPSTATS_MIB_OUTOCTETS, skb->len);
 	return dst_output(skb);
 }
 
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 999a982..becb048 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -2957,10 +2957,6 @@
 	net->ipv6.sysctl.ip6_rt_mtu_expires = 10*60*HZ;
 	net->ipv6.sysctl.ip6_rt_min_advmss = IPV6_MIN_MTU - 20 - 40;
 
-#ifdef CONFIG_PROC_FS
-	proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops);
-	proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops);
-#endif
 	net->ipv6.ip6_rt_gc_expire = 30*HZ;
 
 	ret = 0;
@@ -2981,10 +2977,6 @@
 
 static void __net_exit ip6_route_net_exit(struct net *net)
 {
-#ifdef CONFIG_PROC_FS
-	proc_net_remove(net, "ipv6_route");
-	proc_net_remove(net, "rt6_stats");
-#endif
 	kfree(net->ipv6.ip6_null_entry);
 #ifdef CONFIG_IPV6_MULTIPLE_TABLES
 	kfree(net->ipv6.ip6_prohibit_entry);
@@ -2993,11 +2985,33 @@
 	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
 }
 
+static int __net_init ip6_route_net_init_late(struct net *net)
+{
+#ifdef CONFIG_PROC_FS
+	proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops);
+	proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops);
+#endif
+	return 0;
+}
+
+static void __net_exit ip6_route_net_exit_late(struct net *net)
+{
+#ifdef CONFIG_PROC_FS
+	proc_net_remove(net, "ipv6_route");
+	proc_net_remove(net, "rt6_stats");
+#endif
+}
+
 static struct pernet_operations ip6_route_net_ops = {
 	.init = ip6_route_net_init,
 	.exit = ip6_route_net_exit,
 };
 
+static struct pernet_operations ip6_route_net_late_ops = {
+	.init = ip6_route_net_init_late,
+	.exit = ip6_route_net_exit_late,
+};
+
 static struct notifier_block ip6_route_dev_notifier = {
 	.notifier_call = ip6_route_dev_notify,
 	.priority = 0,
@@ -3047,19 +3061,25 @@
 	if (ret)
 		goto xfrm6_init;
 
+	ret = register_pernet_subsys(&ip6_route_net_late_ops);
+	if (ret)
+		goto fib6_rules_init;
+
 	ret = -ENOBUFS;
 	if (__rtnl_register(PF_INET6, RTM_NEWROUTE, inet6_rtm_newroute, NULL, NULL) ||
 	    __rtnl_register(PF_INET6, RTM_DELROUTE, inet6_rtm_delroute, NULL, NULL) ||
 	    __rtnl_register(PF_INET6, RTM_GETROUTE, inet6_rtm_getroute, NULL, NULL))
-		goto fib6_rules_init;
+		goto out_register_late_subsys;
 
 	ret = register_netdevice_notifier(&ip6_route_dev_notifier);
 	if (ret)
-		goto fib6_rules_init;
+		goto out_register_late_subsys;
 
 out:
 	return ret;
 
+out_register_late_subsys:
+	unregister_pernet_subsys(&ip6_route_net_late_ops);
 fib6_rules_init:
 	fib6_rules_cleanup();
 xfrm6_init:
@@ -3078,6 +3098,7 @@
 void ip6_route_cleanup(void)
 {
 	unregister_netdevice_notifier(&ip6_route_dev_notifier);
+	unregister_pernet_subsys(&ip6_route_net_late_ops);
 	fib6_rules_cleanup();
 	xfrm6_fini();
 	fib6_gc_cleanup();
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 3a9aec2..9df64a5 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1212,7 +1212,8 @@
 	tcp_rsk(req)->snt_isn = isn;
 	tcp_rsk(req)->snt_synack = tcp_time_stamp;
 
-	security_inet_conn_request(sk, skb, req);
+	if (security_inet_conn_request(sk, skb, req))
+		goto drop_and_release;
 
 	if (tcp_v6_send_synack(sk, req,
 			       (struct request_values *)&tmp_ext,
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 07d7d55..cd6f7a9 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -372,7 +372,6 @@
 			skb_trim(skb, skb->dev->mtu);
 	}
 	skb->protocol = ETH_P_AF_IUCV;
-	skb_shinfo(skb)->tx_flags |= SKBTX_DRV_NEEDS_SK_REF;
 	nskb = skb_clone(skb, GFP_ATOMIC);
 	if (!nskb)
 		return -ENOMEM;
diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c
index 443591d..47b259f 100644
--- a/net/l2tp/l2tp_eth.c
+++ b/net/l2tp/l2tp_eth.c
@@ -42,6 +42,11 @@
 	struct sock		*tunnel_sock;
 	struct l2tp_session	*session;
 	struct list_head	list;
+	atomic_long_t		tx_bytes;
+	atomic_long_t		tx_packets;
+	atomic_long_t		rx_bytes;
+	atomic_long_t		rx_packets;
+	atomic_long_t		rx_errors;
 };
 
 /* via l2tp_session_priv() */
@@ -88,24 +93,40 @@
 	struct l2tp_eth *priv = netdev_priv(dev);
 	struct l2tp_session *session = priv->session;
 
+	atomic_long_add(skb->len, &priv->tx_bytes);
+	atomic_long_inc(&priv->tx_packets);
+
 	l2tp_xmit_skb(session, skb, session->hdr_len);
 
-	dev->stats.tx_bytes += skb->len;
-	dev->stats.tx_packets++;
-
-	return 0;
+	return NETDEV_TX_OK;
 }
 
+static struct rtnl_link_stats64 *l2tp_eth_get_stats64(struct net_device *dev,
+						      struct rtnl_link_stats64 *stats)
+{
+	struct l2tp_eth *priv = netdev_priv(dev);
+
+	stats->tx_bytes   = atomic_long_read(&priv->tx_bytes);
+	stats->tx_packets = atomic_long_read(&priv->tx_packets);
+	stats->rx_bytes   = atomic_long_read(&priv->rx_bytes);
+	stats->rx_packets = atomic_long_read(&priv->rx_packets);
+	stats->rx_errors  = atomic_long_read(&priv->rx_errors);
+	return stats;
+}
+
+
 static struct net_device_ops l2tp_eth_netdev_ops = {
 	.ndo_init		= l2tp_eth_dev_init,
 	.ndo_uninit		= l2tp_eth_dev_uninit,
 	.ndo_start_xmit		= l2tp_eth_dev_xmit,
+	.ndo_get_stats64	= l2tp_eth_get_stats64,
 };
 
 static void l2tp_eth_dev_setup(struct net_device *dev)
 {
 	ether_setup(dev);
-	dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+	dev->priv_flags		&= ~IFF_TX_SKB_SHARING;
+	dev->features		|= NETIF_F_LLTX;
 	dev->netdev_ops		= &l2tp_eth_netdev_ops;
 	dev->destructor		= free_netdev;
 }
@@ -114,17 +135,17 @@
 {
 	struct l2tp_eth_sess *spriv = l2tp_session_priv(session);
 	struct net_device *dev = spriv->dev;
+	struct l2tp_eth *priv = netdev_priv(dev);
 
 	if (session->debug & L2TP_MSG_DATA) {
 		unsigned int length;
-		u8 *ptr = skb->data;
 
 		length = min(32u, skb->len);
 		if (!pskb_may_pull(skb, length))
 			goto error;
 
 		pr_debug("%s: eth recv\n", session->name);
-		print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, ptr, length);
+		print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, skb->data, length);
 	}
 
 	if (!pskb_may_pull(skb, sizeof(ETH_HLEN)))
@@ -139,15 +160,15 @@
 	nf_reset(skb);
 
 	if (dev_forward_skb(dev, skb) == NET_RX_SUCCESS) {
-		dev->stats.rx_packets++;
-		dev->stats.rx_bytes += data_len;
-	} else
-		dev->stats.rx_errors++;
-
+		atomic_long_inc(&priv->rx_packets);
+		atomic_long_add(data_len, &priv->rx_bytes);
+	} else {
+		atomic_long_inc(&priv->rx_errors);
+	}
 	return;
 
 error:
-	dev->stats.rx_errors++;
+	atomic_long_inc(&priv->rx_errors);
 	kfree_skb(skb);
 }
 
@@ -162,6 +183,7 @@
 		if (dev) {
 			unregister_netdev(dev);
 			spriv->dev = NULL;
+			module_put(THIS_MODULE);
 		}
 	}
 }
@@ -249,6 +271,7 @@
 	if (rc < 0)
 		goto out_del_dev;
 
+	__module_get(THIS_MODULE);
 	/* Must be done after register_netdev() */
 	strlcpy(session->ifname, dev->name, IFNAMSIZ);
 
diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c
index 70614e7..61d8b75 100644
--- a/net/l2tp/l2tp_ip.c
+++ b/net/l2tp/l2tp_ip.c
@@ -464,10 +464,12 @@
 					   sk->sk_bound_dev_if);
 		if (IS_ERR(rt))
 			goto no_route;
-		if (connected)
+		if (connected) {
 			sk_setup_caps(sk, &rt->dst);
-		else
-			dst_release(&rt->dst); /* safe since we hold rcu_read_lock */
+		} else {
+			skb_dst_set(skb, &rt->dst);
+			goto xmit;
+		}
 	}
 
 	/* We dont need to clone dst here, it is guaranteed to not disappear.
@@ -475,6 +477,7 @@
 	 */
 	skb_dst_set_noref(skb, &rt->dst);
 
+xmit:
 	/* Queue the packet to IP for output */
 	rc = ip_queue_xmit(skb, &inet->cork.fl);
 	rcu_read_unlock();
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 26ddb69..c649188 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -145,15 +145,20 @@
 	struct tid_ampdu_rx *tid_rx;
 	unsigned long timeout;
 
+	rcu_read_lock();
 	tid_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[*ptid]);
-	if (!tid_rx)
+	if (!tid_rx) {
+		rcu_read_unlock();
 		return;
+	}
 
 	timeout = tid_rx->last_rx + TU_TO_JIFFIES(tid_rx->timeout);
 	if (time_is_after_jiffies(timeout)) {
 		mod_timer(&tid_rx->session_timer, timeout);
+		rcu_read_unlock();
 		return;
 	}
+	rcu_read_unlock();
 
 #ifdef CONFIG_MAC80211_HT_DEBUG
 	printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 495831e..7d5108a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -533,16 +533,16 @@
 		sinfo.filled = 0;
 		sta_set_sinfo(sta, &sinfo);
 
-		if (sinfo.filled | STATION_INFO_TX_BITRATE)
+		if (sinfo.filled & STATION_INFO_TX_BITRATE)
 			data[i] = 100000 *
 				cfg80211_calculate_bitrate(&sinfo.txrate);
 		i++;
-		if (sinfo.filled | STATION_INFO_RX_BITRATE)
+		if (sinfo.filled & STATION_INFO_RX_BITRATE)
 			data[i] = 100000 *
 				cfg80211_calculate_bitrate(&sinfo.rxrate);
 		i++;
 
-		if (sinfo.filled | STATION_INFO_SIGNAL_AVG)
+		if (sinfo.filled & STATION_INFO_SIGNAL_AVG)
 			data[i] = (u8)sinfo.signal_avg;
 		i++;
 	} else {
@@ -2093,6 +2093,9 @@
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	int i, ret;
 
+	if (!ieee80211_sdata_running(sdata))
+		return -ENETDOWN;
+
 	if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) {
 		ret = drv_set_bitrate_mask(local, sdata, mask);
 		if (ret)
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index d4c19a7..8664111 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -637,6 +637,18 @@
 		ieee80211_configure_filter(local);
 		break;
 	default:
+		mutex_lock(&local->mtx);
+		if (local->hw_roc_dev == sdata->dev &&
+		    local->hw_roc_channel) {
+			/* ignore return value since this is racy */
+			drv_cancel_remain_on_channel(local);
+			ieee80211_queue_work(&local->hw, &local->hw_roc_done);
+		}
+		mutex_unlock(&local->mtx);
+
+		flush_work(&local->hw_roc_start);
+		flush_work(&local->hw_roc_done);
+
 		flush_work(&sdata->work);
 		/*
 		 * When we get here, the interface is marked down.
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 04c3063..a4bb856 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1220,6 +1220,22 @@
 	sdata->vif.bss_conf.qos = true;
 }
 
+static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
+{
+	lockdep_assert_held(&sdata->local->mtx);
+
+	sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+				IEEE80211_STA_BEACON_POLL);
+	ieee80211_run_deferred_scan(sdata->local);
+}
+
+static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
+{
+	mutex_lock(&sdata->local->mtx);
+	__ieee80211_stop_poll(sdata);
+	mutex_unlock(&sdata->local->mtx);
+}
+
 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
 					   u16 capab, bool erp_valid, u8 erp)
 {
@@ -1285,8 +1301,7 @@
 	sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
 
 	/* just to be sure */
-	sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
-				IEEE80211_STA_BEACON_POLL);
+	ieee80211_stop_poll(sdata);
 
 	ieee80211_led_assoc(local, 1);
 
@@ -1327,7 +1342,6 @@
 	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
 	u32 changed = 0;
-	u8 bssid[ETH_ALEN];
 
 	ASSERT_MGD_MTX(ifmgd);
 
@@ -1337,10 +1351,9 @@
 	if (WARN_ON(!ifmgd->associated))
 		return;
 
-	memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
+	ieee80211_stop_poll(sdata);
 
 	ifmgd->associated = NULL;
-	memset(ifmgd->bssid, 0, ETH_ALEN);
 
 	/*
 	 * we need to commit the associated = NULL change because the
@@ -1360,7 +1373,7 @@
 	netif_carrier_off(sdata->dev);
 
 	mutex_lock(&local->sta_mtx);
-	sta = sta_info_get(sdata, bssid);
+	sta = sta_info_get(sdata, ifmgd->bssid);
 	if (sta) {
 		set_sta_flag(sta, WLAN_STA_BLOCK_BA);
 		ieee80211_sta_tear_down_BA_sessions(sta, tx);
@@ -1369,13 +1382,16 @@
 
 	/* deauthenticate/disassociate now */
 	if (tx || frame_buf)
-		ieee80211_send_deauth_disassoc(sdata, bssid, stype, reason,
-					       tx, frame_buf);
+		ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
+					       reason, tx, frame_buf);
 
 	/* flush out frame */
 	if (tx)
 		drv_flush(local, false);
 
+	/* clear bssid only after building the needed mgmt frames */
+	memset(ifmgd->bssid, 0, ETH_ALEN);
+
 	/* remove AP and TDLS peers */
 	sta_info_flush(local, sdata);
 
@@ -1456,8 +1472,7 @@
 		return;
 	}
 
-	ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
-			  IEEE80211_STA_BEACON_POLL);
+	__ieee80211_stop_poll(sdata);
 
 	mutex_lock(&local->iflist_mtx);
 	ieee80211_recalc_ps(local, -1);
@@ -1477,7 +1492,6 @@
 		  round_jiffies_up(jiffies +
 				   IEEE80211_CONNECTION_IDLE_TIME));
 out:
-	ieee80211_run_deferred_scan(local);
 	mutex_unlock(&local->mtx);
 }
 
@@ -2408,7 +2422,11 @@
 		net_dbg_ratelimited("%s: cancelling probereq poll due to a received beacon\n",
 				    sdata->name);
 #endif
+		mutex_lock(&local->mtx);
 		ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL;
+		ieee80211_run_deferred_scan(local);
+		mutex_unlock(&local->mtx);
+
 		mutex_lock(&local->iflist_mtx);
 		ieee80211_recalc_ps(local, -1);
 		mutex_unlock(&local->iflist_mtx);
@@ -2595,9 +2613,6 @@
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	u8 frame_buf[DEAUTH_DISASSOC_LEN];
 
-	ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
-			  IEEE80211_STA_BEACON_POLL);
-
 	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
 			       false, frame_buf);
 	mutex_unlock(&ifmgd->mtx);
@@ -2874,8 +2889,7 @@
 	u32 flags;
 
 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
-		sdata->u.mgd.flags &= ~(IEEE80211_STA_BEACON_POLL |
-					IEEE80211_STA_CONNECTION_POLL);
+		__ieee80211_stop_poll(sdata);
 
 		/* let's probe the connection once */
 		flags = sdata->local->hw.flags;
@@ -2944,7 +2958,10 @@
 	if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running))
 		add_timer(&ifmgd->chswitch_timer);
 	ieee80211_sta_reset_beacon_monitor(sdata);
+
+	mutex_lock(&sdata->local->mtx);
 	ieee80211_restart_sta_timer(sdata);
+	mutex_unlock(&sdata->local->mtx);
 }
 #endif
 
@@ -3106,7 +3123,7 @@
 	}
 
 	local->oper_channel = cbss->channel;
-	ieee80211_hw_config(local, 0);
+	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
 
 	if (!have_sta) {
 		u32 rates = 0, basic_rates = 0;
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index f054e94..935aa4b 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -234,6 +234,22 @@
 		return;
 	}
 
+	/* was never transmitted */
+	if (local->hw_roc_skb) {
+		u64 cookie;
+
+		cookie = local->hw_roc_cookie ^ 2;
+
+		cfg80211_mgmt_tx_status(local->hw_roc_dev, cookie,
+					local->hw_roc_skb->data,
+					local->hw_roc_skb->len, false,
+					GFP_KERNEL);
+
+		kfree_skb(local->hw_roc_skb);
+		local->hw_roc_skb = NULL;
+		local->hw_roc_skb_for_status = NULL;
+	}
+
 	if (!local->hw_roc_for_tx)
 		cfg80211_remain_on_channel_expired(local->hw_roc_dev,
 						   local->hw_roc_cookie,
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 7bcecf7..965e6ec 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2455,7 +2455,7 @@
 	 * frames that we didn't handle, including returning unknown
 	 * ones. For all other modes we will return them to the sender,
 	 * setting the 0x80 bit in the action category, as required by
-	 * 802.11-2007 7.3.1.11.
+	 * 802.11-2012 9.24.4.
 	 * Newer versions of hostapd shall also use the management frame
 	 * registration mechanisms, but older ones still use cooked
 	 * monitor interfaces so push all frames there.
@@ -2465,6 +2465,9 @@
 	     sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
 		return RX_DROP_MONITOR;
 
+	if (is_multicast_ether_addr(mgmt->da))
+		return RX_DROP_MONITOR;
+
 	/* do not return rejected action frames */
 	if (mgmt->u.action.category & 0x80)
 		return RX_DROP_UNUSABLE;
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index f5b1638..de455f8 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -378,7 +378,7 @@
 	/* make the station visible */
 	sta_info_hash_add(local, sta);
 
-	list_add(&sta->list, &local->sta_list);
+	list_add_rcu(&sta->list, &local->sta_list);
 
 	set_sta_flag(sta, WLAN_STA_INSERTED);
 
@@ -688,7 +688,7 @@
 	if (ret)
 		return ret;
 
-	list_del(&sta->list);
+	list_del_rcu(&sta->list);
 
 	mutex_lock(&local->key_mtx);
 	for (i = 0; i < NUM_DEFAULT_KEYS; i++)
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 3bb24a1..a470e11 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -271,6 +271,9 @@
  * @plink_timer: peer link watch timer
  * @plink_timer_was_running: used by suspend/resume to restore timers
  * @t_offset: timing offset relative to this host
+ * @t_offset_setpoint: reference timing offset of this sta to be used when
+ * 	calculating clockdrift
+ * @ch_type: peer's channel type
  * @debugfs: debug filesystem info
  * @dead: set to true when sta is unlinked
  * @uploaded: set to true when sta is uploaded to the driver
@@ -278,6 +281,8 @@
  * @sta: station information we share with the driver
  * @sta_state: duplicates information about station state (for debug)
  * @beacon_loss_count: number of times beacon loss has triggered
+ * @supports_40mhz: tracks whether the station advertised 40 MHz support
+ *	as we overwrite its HT parameters with the currently used value
  */
 struct sta_info {
 	/* General information, mostly static */
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 847215b..e453212 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1737,7 +1737,7 @@
 	__le16 fc;
 	struct ieee80211_hdr hdr;
 	struct ieee80211s_hdr mesh_hdr __maybe_unused;
-	struct mesh_path __maybe_unused *mppath = NULL;
+	struct mesh_path __maybe_unused *mppath = NULL, *mpath = NULL;
 	const u8 *encaps_data;
 	int encaps_len, skip_header_bytes;
 	int nh_pos, h_pos;
@@ -1803,8 +1803,11 @@
 			goto fail;
 		}
 		rcu_read_lock();
-		if (!is_multicast_ether_addr(skb->data))
-			mppath = mpp_path_lookup(skb->data, sdata);
+		if (!is_multicast_ether_addr(skb->data)) {
+			mpath = mesh_path_lookup(skb->data, sdata);
+			if (!mpath)
+				mppath = mpp_path_lookup(skb->data, sdata);
+		}
 
 		/*
 		 * Use address extension if it is a packet from
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index a44c680..8dd4712 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1271,7 +1271,7 @@
 			enum ieee80211_sta_state state;
 
 			for (state = IEEE80211_STA_NOTEXIST;
-			     state < sta->sta_state - 1; state++)
+			     state < sta->sta_state; state++)
 				WARN_ON(drv_sta_state(local, sta->sdata, sta,
 						      state, state + 1));
 		}
diff --git a/net/mac802154/tx.c b/net/mac802154/tx.c
index 8781d8f9..434b687 100644
--- a/net/mac802154/tx.c
+++ b/net/mac802154/tx.c
@@ -83,9 +83,10 @@
 {
 	struct xmit_work *work;
 
-	if (!(priv->phy->channels_supported[page] & (1 << chan)))
+	if (!(priv->phy->channels_supported[page] & (1 << chan))) {
 		WARN_ON(1);
 		return NETDEV_TX_OK;
+	}
 
 	if (!(priv->hw.flags & IEEE802154_HW_OMIT_CKSUM)) {
 		u16 crc = crc_ccitt(0, skb->data, skb->len);
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index 819c342f..9730882 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -640,6 +640,14 @@
 }
 
 static int
+ip_set_none(struct sock *ctnl, struct sk_buff *skb,
+	    const struct nlmsghdr *nlh,
+	    const struct nlattr * const attr[])
+{
+	return -EOPNOTSUPP;
+}
+
+static int
 ip_set_create(struct sock *ctnl, struct sk_buff *skb,
 	      const struct nlmsghdr *nlh,
 	      const struct nlattr * const attr[])
@@ -1539,6 +1547,10 @@
 }
 
 static const struct nfnl_callback ip_set_netlink_subsys_cb[IPSET_MSG_MAX] = {
+	[IPSET_CMD_NONE]	= {
+		.call		= ip_set_none,
+		.attr_count	= IPSET_ATTR_CMD_MAX,
+	},
 	[IPSET_CMD_CREATE]	= {
 		.call		= ip_set_create,
 		.attr_count	= IPSET_ATTR_CMD_MAX,
diff --git a/net/netfilter/ipset/ip_set_hash_netiface.c b/net/netfilter/ipset/ip_set_hash_netiface.c
index ee863943..d5d3607 100644
--- a/net/netfilter/ipset/ip_set_hash_netiface.c
+++ b/net/netfilter/ipset/ip_set_hash_netiface.c
@@ -38,30 +38,6 @@
 
 #define iface_data(n)	(rb_entry(n, struct iface_node, node)->iface)
 
-static inline long
-ifname_compare(const char *_a, const char *_b)
-{
-	const long *a = (const long *)_a;
-	const long *b = (const long *)_b;
-
-	BUILD_BUG_ON(IFNAMSIZ > 4 * sizeof(unsigned long));
-	if (a[0] != b[0])
-		return a[0] - b[0];
-	if (IFNAMSIZ > sizeof(long)) {
-		if (a[1] != b[1])
-			return a[1] - b[1];
-	}
-	if (IFNAMSIZ > 2 * sizeof(long)) {
-		if (a[2] != b[2])
-			return a[2] - b[2];
-	}
-	if (IFNAMSIZ > 3 * sizeof(long)) {
-		if (a[3] != b[3])
-			return a[3] - b[3];
-	}
-	return 0;
-}
-
 static void
 rbtree_destroy(struct rb_root *root)
 {
@@ -99,7 +75,7 @@
 
 	while (n) {
 		const char *d = iface_data(n);
-		long res = ifname_compare(*iface, d);
+		int res = strcmp(*iface, d);
 
 		if (res < 0)
 			n = n->rb_left;
@@ -121,7 +97,7 @@
 
 	while (*n) {
 		char *ifname = iface_data(*n);
-		long res = ifname_compare(*iface, ifname);
+		int res = strcmp(*iface, ifname);
 
 		p = *n;
 		if (res < 0)
@@ -366,7 +342,7 @@
 	struct hash_netiface4_elem data = { .cidr = HOST_MASK };
 	u32 ip = 0, ip_to, last;
 	u32 timeout = h->timeout;
-	char iface[IFNAMSIZ] = {};
+	char iface[IFNAMSIZ];
 	int ret;
 
 	if (unlikely(!tb[IPSET_ATTR_IP] ||
@@ -663,7 +639,7 @@
 	ipset_adtfn adtfn = set->variant->adt[adt];
 	struct hash_netiface6_elem data = { .cidr = HOST_MASK };
 	u32 timeout = h->timeout;
-	char iface[IFNAMSIZ] = {};
+	char iface[IFNAMSIZ];
 	int ret;
 
 	if (unlikely(!tb[IPSET_ATTR_IP] ||
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index dd811b8..d43e3c1 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -76,19 +76,19 @@
 
 #ifdef CONFIG_IP_VS_IPV6
 /* Taken from rt6_fill_node() in net/ipv6/route.c, is there a better way? */
-static int __ip_vs_addr_is_local_v6(struct net *net,
-				    const struct in6_addr *addr)
+static bool __ip_vs_addr_is_local_v6(struct net *net,
+				     const struct in6_addr *addr)
 {
-	struct rt6_info *rt;
 	struct flowi6 fl6 = {
 		.daddr = *addr,
 	};
+	struct dst_entry *dst = ip6_route_output(net, NULL, &fl6);
+	bool is_local;
 
-	rt = (struct rt6_info *)ip6_route_output(net, NULL, &fl6);
-	if (rt && rt->dst.dev && (rt->dst.dev->flags & IFF_LOOPBACK))
-		return 1;
+	is_local = !dst->error && dst->dev && (dst->dev->flags & IFF_LOOPBACK);
 
-	return 0;
+	dst_release(dst);
+	return is_local;
 }
 #endif
 
diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c
index 46d69d7..31f50bc 100644
--- a/net/netfilter/nf_conntrack_h323_main.c
+++ b/net/netfilter/nf_conntrack_h323_main.c
@@ -270,9 +270,8 @@
 		return 0;
 
 	/* RTP port is even */
-	port &= htons(~1);
-	rtp_port = port;
-	rtcp_port = htons(ntohs(port) + 1);
+	rtp_port = port & ~htons(1);
+	rtcp_port = port | htons(1);
 
 	/* Create expect for RTP */
 	if ((rtp_exp = nf_ct_expect_alloc(ct)) == NULL)
diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index 3e797d1..791d56b 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -169,8 +169,10 @@
 
 		err = nla_parse(cda, ss->cb[cb_id].attr_count,
 				attr, attrlen, ss->cb[cb_id].policy);
-		if (err < 0)
+		if (err < 0) {
+			rcu_read_unlock();
 			return err;
+		}
 
 		if (nc->call_rcu) {
 			err = nc->call_rcu(net->nfnl, skb, nlh,
diff --git a/net/netfilter/xt_HMARK.c b/net/netfilter/xt_HMARK.c
index 0a96a43..1686ca1 100644
--- a/net/netfilter/xt_HMARK.c
+++ b/net/netfilter/xt_HMARK.c
@@ -32,13 +32,13 @@
 MODULE_ALIAS("ip6t_HMARK");
 
 struct hmark_tuple {
-	u32			src;
-	u32			dst;
+	__be32			src;
+	__be32			dst;
 	union hmark_ports	uports;
-	uint8_t			proto;
+	u8			proto;
 };
 
-static inline u32 hmark_addr6_mask(const __u32 *addr32, const __u32 *mask)
+static inline __be32 hmark_addr6_mask(const __be32 *addr32, const __be32 *mask)
 {
 	return (addr32[0] & mask[0]) ^
 	       (addr32[1] & mask[1]) ^
@@ -46,8 +46,8 @@
 	       (addr32[3] & mask[3]);
 }
 
-static inline u32
-hmark_addr_mask(int l3num, const __u32 *addr32, const __u32 *mask)
+static inline __be32
+hmark_addr_mask(int l3num, const __be32 *addr32, const __be32 *mask)
 {
 	switch (l3num) {
 	case AF_INET:
@@ -58,6 +58,22 @@
 	return 0;
 }
 
+static inline void hmark_swap_ports(union hmark_ports *uports,
+				    const struct xt_hmark_info *info)
+{
+	union hmark_ports hp;
+	u16 src, dst;
+
+	hp.b32 = (uports->b32 & info->port_mask.b32) | info->port_set.b32;
+	src = ntohs(hp.b16.src);
+	dst = ntohs(hp.b16.dst);
+
+	if (dst > src)
+		uports->v32 = (dst << 16) | src;
+	else
+		uports->v32 = (src << 16) | dst;
+}
+
 static int
 hmark_ct_set_htuple(const struct sk_buff *skb, struct hmark_tuple *t,
 		    const struct xt_hmark_info *info)
@@ -74,22 +90,19 @@
 	otuple = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
 	rtuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
 
-	t->src = hmark_addr_mask(otuple->src.l3num, otuple->src.u3.all,
-				 info->src_mask.all);
-	t->dst = hmark_addr_mask(otuple->src.l3num, rtuple->src.u3.all,
-				 info->dst_mask.all);
+	t->src = hmark_addr_mask(otuple->src.l3num, otuple->src.u3.ip6,
+				 info->src_mask.ip6);
+	t->dst = hmark_addr_mask(otuple->src.l3num, rtuple->src.u3.ip6,
+				 info->dst_mask.ip6);
 
 	if (info->flags & XT_HMARK_FLAG(XT_HMARK_METHOD_L3))
 		return 0;
 
 	t->proto = nf_ct_protonum(ct);
 	if (t->proto != IPPROTO_ICMP) {
-		t->uports.p16.src = otuple->src.u.all;
-		t->uports.p16.dst = rtuple->src.u.all;
-		t->uports.v32 = (t->uports.v32 & info->port_mask.v32) |
-				info->port_set.v32;
-		if (t->uports.p16.dst < t->uports.p16.src)
-			swap(t->uports.p16.dst, t->uports.p16.src);
+		t->uports.b16.src = otuple->src.u.all;
+		t->uports.b16.dst = rtuple->src.u.all;
+		hmark_swap_ports(&t->uports, info);
 	}
 
 	return 0;
@@ -98,15 +111,19 @@
 #endif
 }
 
+/* This hash function is endian independent, to ensure consistent hashing if
+ * the cluster is composed of big and little endian systems. */
 static inline u32
 hmark_hash(struct hmark_tuple *t, const struct xt_hmark_info *info)
 {
 	u32 hash;
+	u32 src = ntohl(t->src);
+	u32 dst = ntohl(t->dst);
 
-	if (t->dst < t->src)
-		swap(t->src, t->dst);
+	if (dst < src)
+		swap(src, dst);
 
-	hash = jhash_3words(t->src, t->dst, t->uports.v32, info->hashrnd);
+	hash = jhash_3words(src, dst, t->uports.v32, info->hashrnd);
 	hash = hash ^ (t->proto & info->proto_mask);
 
 	return (((u64)hash * info->hmodulus) >> 32) + info->hoffset;
@@ -126,11 +143,7 @@
 	if (skb_copy_bits(skb, nhoff, &t->uports, sizeof(t->uports)) < 0)
 		return;
 
-	t->uports.v32 = (t->uports.v32 & info->port_mask.v32) |
-			info->port_set.v32;
-
-	if (t->uports.p16.dst < t->uports.p16.src)
-		swap(t->uports.p16.dst, t->uports.p16.src);
+	hmark_swap_ports(&t->uports, info);
 }
 
 #if IS_ENABLED(CONFIG_IP6_NF_IPTABLES)
@@ -178,8 +191,8 @@
 			return -1;
 	}
 noicmp:
-	t->src = hmark_addr6_mask(ip6->saddr.s6_addr32, info->src_mask.all);
-	t->dst = hmark_addr6_mask(ip6->daddr.s6_addr32, info->dst_mask.all);
+	t->src = hmark_addr6_mask(ip6->saddr.s6_addr32, info->src_mask.ip6);
+	t->dst = hmark_addr6_mask(ip6->daddr.s6_addr32, info->dst_mask.ip6);
 
 	if (info->flags & XT_HMARK_FLAG(XT_HMARK_METHOD_L3))
 		return 0;
@@ -255,11 +268,8 @@
 		}
 	}
 
-	t->src = (__force u32) ip->saddr;
-	t->dst = (__force u32) ip->daddr;
-
-	t->src &= info->src_mask.ip;
-	t->dst &= info->dst_mask.ip;
+	t->src = ip->saddr & info->src_mask.ip;
+	t->dst = ip->daddr & info->dst_mask.ip;
 
 	if (info->flags & XT_HMARK_FLAG(XT_HMARK_METHOD_L3))
 		return 0;
diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c
index 3f339b1..17a707d 100644
--- a/net/nfc/llcp/sock.c
+++ b/net/nfc/llcp/sock.c
@@ -292,6 +292,9 @@
 
 	pr_debug("%p\n", sk);
 
+	if (llcp_sock == NULL)
+		return -EBADFD;
+
 	addr->sa_family = AF_NFC;
 	*len = sizeof(struct sockaddr_nfc_llcp);
 
diff --git a/net/nfc/nci/ntf.c b/net/nfc/nci/ntf.c
index cb26461..2ab196a 100644
--- a/net/nfc/nci/ntf.c
+++ b/net/nfc/nci/ntf.c
@@ -106,7 +106,7 @@
 	nfca_poll->sens_res = __le16_to_cpu(*((__u16 *)data));
 	data += 2;
 
-	nfca_poll->nfcid1_len = *data++;
+	nfca_poll->nfcid1_len = min_t(__u8, *data++, NFC_NFCID1_MAXSIZE);
 
 	pr_debug("sens_res 0x%x, nfcid1_len %d\n",
 		 nfca_poll->sens_res, nfca_poll->nfcid1_len);
@@ -130,7 +130,7 @@
 			struct rf_tech_specific_params_nfcb_poll *nfcb_poll,
 						     __u8 *data)
 {
-	nfcb_poll->sensb_res_len = *data++;
+	nfcb_poll->sensb_res_len = min_t(__u8, *data++, NFC_SENSB_RES_MAXSIZE);
 
 	pr_debug("sensb_res_len %d\n", nfcb_poll->sensb_res_len);
 
@@ -145,7 +145,7 @@
 						     __u8 *data)
 {
 	nfcf_poll->bit_rate = *data++;
-	nfcf_poll->sensf_res_len = *data++;
+	nfcf_poll->sensf_res_len = min_t(__u8, *data++, NFC_SENSF_RES_MAXSIZE);
 
 	pr_debug("bit_rate %d, sensf_res_len %d\n",
 		 nfcf_poll->bit_rate, nfcf_poll->sensf_res_len);
@@ -331,7 +331,7 @@
 	switch (ntf->activation_rf_tech_and_mode) {
 	case NCI_NFC_A_PASSIVE_POLL_MODE:
 		nfca_poll = &ntf->activation_params.nfca_poll_iso_dep;
-		nfca_poll->rats_res_len = *data++;
+		nfca_poll->rats_res_len = min_t(__u8, *data++, 20);
 		pr_debug("rats_res_len %d\n", nfca_poll->rats_res_len);
 		if (nfca_poll->rats_res_len > 0) {
 			memcpy(nfca_poll->rats_res,
@@ -341,7 +341,7 @@
 
 	case NCI_NFC_B_PASSIVE_POLL_MODE:
 		nfcb_poll = &ntf->activation_params.nfcb_poll_iso_dep;
-		nfcb_poll->attrib_res_len = *data++;
+		nfcb_poll->attrib_res_len = min_t(__u8, *data++, 50);
 		pr_debug("attrib_res_len %d\n", nfcb_poll->attrib_res_len);
 		if (nfcb_poll->attrib_res_len > 0) {
 			memcpy(nfcb_poll->attrib_res,
diff --git a/net/nfc/rawsock.c b/net/nfc/rawsock.c
index ec1134c..8b8a6a2 100644
--- a/net/nfc/rawsock.c
+++ b/net/nfc/rawsock.c
@@ -54,7 +54,10 @@
 {
 	struct sock *sk = sock->sk;
 
-	pr_debug("sock=%p\n", sock);
+	pr_debug("sock=%p sk=%p\n", sock, sk);
+
+	if (!sk)
+		return 0;
 
 	sock_orphan(sk);
 	sock_put(sk);
diff --git a/net/phonet/af_phonet.c b/net/phonet/af_phonet.c
index 779ce4f..5a940db 100644
--- a/net/phonet/af_phonet.c
+++ b/net/phonet/af_phonet.c
@@ -5,8 +5,8 @@
  *
  * Copyright (C) 2008 Nokia Corporation.
  *
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ *          Rémi Denis-Courmont
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/net/phonet/datagram.c b/net/phonet/datagram.c
index bf35b4e..12c30f3e 100644
--- a/net/phonet/datagram.c
+++ b/net/phonet/datagram.c
@@ -5,8 +5,8 @@
  *
  * Copyright (C) 2008 Nokia Corporation.
  *
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ *          Rémi Denis-Courmont
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/net/phonet/pep-gprs.c b/net/phonet/pep-gprs.c
index d012089..a2fba7e 100644
--- a/net/phonet/pep-gprs.c
+++ b/net/phonet/pep-gprs.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2008 Nokia Corporation.
  *
- * Author: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index 9dd4f92..576f22c 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2008 Nokia Corporation.
  *
- * Author: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index 36f75a9..5bf6341 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -5,8 +5,8 @@
  *
  * Copyright (C) 2008 Nokia Corporation.
  *
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ *          Rémi Denis-Courmont
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index cfdf135..7dd762a 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -5,8 +5,8 @@
  *
  * Copyright (C) 2008 Nokia Corporation.
  *
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ *          Remi Denis-Courmont
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/net/phonet/socket.c b/net/phonet/socket.c
index 89cfa9c..0acc943 100644
--- a/net/phonet/socket.c
+++ b/net/phonet/socket.c
@@ -5,8 +5,8 @@
  *
  * Copyright (C) 2008 Nokia Corporation.
  *
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
- * Original author: Sakari Ailus <sakari.ailus@nokia.com>
+ * Authors: Sakari Ailus <sakari.ailus@nokia.com>
+ *          Rémi Denis-Courmont
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/net/phonet/sysctl.c b/net/phonet/sysctl.c
index 696348f..d6bbbbd 100644
--- a/net/phonet/sysctl.c
+++ b/net/phonet/sysctl.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2008 Nokia Corporation.
  *
- * Contact: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
+ * Author: Rémi Denis-Courmont
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 5bc9ab1..b16517e 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -271,6 +271,7 @@
 	 */
 	asoc->peer.sack_needed = 1;
 	asoc->peer.sack_cnt = 0;
+	asoc->peer.sack_generation = 1;
 
 	/* Assume that the peer will tell us if he recognizes ASCONF
 	 * as part of INIT exchange.
diff --git a/net/sctp/output.c b/net/sctp/output.c
index f1b7d4b..6ae47aca 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -248,6 +248,11 @@
 		/* If the SACK timer is running, we have a pending SACK */
 		if (timer_pending(timer)) {
 			struct sctp_chunk *sack;
+
+			if (pkt->transport->sack_generation !=
+			    pkt->transport->asoc->peer.sack_generation)
+				return retval;
+
 			asoc->a_rwnd = asoc->rwnd;
 			sack = sctp_make_sack(asoc);
 			if (sack) {
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 5942d27..9c90811 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -673,7 +673,9 @@
 				SCTP_DEBUG_PRINTK("sctp_addrwq_timo_handler: sctp_asconf_mgmt failed\n");
 			sctp_bh_unlock_sock(sk);
 		}
+#if IS_ENABLED(CONFIG_IPV6)
 free_next:
+#endif
 		list_del(&addrw->list);
 		kfree(addrw);
 	}
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index a85eeeb..b6de71ef 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -734,8 +734,10 @@
 	int len;
 	__u32 ctsn;
 	__u16 num_gabs, num_dup_tsns;
+	struct sctp_association *aptr = (struct sctp_association *)asoc;
 	struct sctp_tsnmap *map = (struct sctp_tsnmap *)&asoc->peer.tsn_map;
 	struct sctp_gap_ack_block gabs[SCTP_MAX_GABS];
+	struct sctp_transport *trans;
 
 	memset(gabs, 0, sizeof(gabs));
 	ctsn = sctp_tsnmap_get_ctsn(map);
@@ -805,6 +807,20 @@
 		sctp_addto_chunk(retval, sizeof(__u32) * num_dup_tsns,
 				 sctp_tsnmap_get_dups(map));
 
+	/* Once we have a sack generated, check to see what our sack
+	 * generation is, if its 0, reset the transports to 0, and reset
+	 * the association generation to 1
+	 *
+	 * The idea is that zero is never used as a valid generation for the
+	 * association so no transport will match after a wrap event like this,
+	 * Until the next sack
+	 */
+	if (++aptr->peer.sack_generation == 0) {
+		list_for_each_entry(trans, &asoc->peer.transport_addr_list,
+				    transports)
+			trans->sack_generation = 0;
+		aptr->peer.sack_generation = 1;
+	}
 nodata:
 	return retval;
 }
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index c96d1a8..8716da1 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -1268,7 +1268,7 @@
 		case SCTP_CMD_REPORT_TSN:
 			/* Record the arrival of a TSN.  */
 			error = sctp_tsnmap_mark(&asoc->peer.tsn_map,
-						 cmd->obj.u32);
+						 cmd->obj.u32, NULL);
 			break;
 
 		case SCTP_CMD_REPORT_FWDTSN:
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index b026ba0..1dcceb6 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -68,6 +68,8 @@
 	peer->af_specific = sctp_get_af_specific(addr->sa.sa_family);
 	memset(&peer->saddr, 0, sizeof(union sctp_addr));
 
+	peer->sack_generation = 0;
+
 	/* From 6.3.1 RTO Calculation:
 	 *
 	 * C1) Until an RTT measurement has been made for a packet sent to the
diff --git a/net/sctp/tsnmap.c b/net/sctp/tsnmap.c
index f1e40ceb..b5fb7c40 100644
--- a/net/sctp/tsnmap.c
+++ b/net/sctp/tsnmap.c
@@ -114,7 +114,8 @@
 
 
 /* Mark this TSN as seen.  */
-int sctp_tsnmap_mark(struct sctp_tsnmap *map, __u32 tsn)
+int sctp_tsnmap_mark(struct sctp_tsnmap *map, __u32 tsn,
+		     struct sctp_transport *trans)
 {
 	u16 gap;
 
@@ -133,6 +134,9 @@
 		 */
 		map->max_tsn_seen++;
 		map->cumulative_tsn_ack_point++;
+		if (trans)
+			trans->sack_generation =
+				trans->asoc->peer.sack_generation;
 		map->base_tsn++;
 	} else {
 		/* Either we already have a gap, or about to record a gap, so
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index 8a84017..33d8947 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -715,7 +715,8 @@
 	 * can mark it as received so the tsn_map is updated correctly.
 	 */
 	if (sctp_tsnmap_mark(&asoc->peer.tsn_map,
-			     ntohl(chunk->subh.data_hdr->tsn)))
+			     ntohl(chunk->subh.data_hdr->tsn),
+			     chunk->transport))
 		goto fail_mark;
 
 	/* First calculate the padding, so we don't inadvertently
diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c
index f2d1de7..f5a6a4f 100644
--- a/net/sctp/ulpqueue.c
+++ b/net/sctp/ulpqueue.c
@@ -1051,7 +1051,7 @@
 	if (chunk && (freed >= needed)) {
 		__u32 tsn;
 		tsn = ntohl(chunk->subh.data_hdr->tsn);
-		sctp_tsnmap_mark(&asoc->peer.tsn_map, tsn);
+		sctp_tsnmap_mark(&asoc->peer.tsn_map, tsn, chunk->transport);
 		sctp_ulpq_tail_data(ulpq, chunk, gfp);
 
 		sctp_ulpq_partial_delivery(ulpq, chunk, gfp);
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index 0404047..21fde99 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -71,7 +71,9 @@
 		msg->errno = err;
 		destroy_msg(msg);
 	} while (!list_empty(head));
-	wake_up(waitq);
+
+	if (waitq)
+		wake_up(waitq);
 }
 
 static void
@@ -91,11 +93,9 @@
 	}
 	dentry = dget(pipe->dentry);
 	spin_unlock(&pipe->lock);
-	if (dentry) {
-		rpc_purge_list(&RPC_I(dentry->d_inode)->waitq,
-			       &free_list, destroy_msg, -ETIMEDOUT);
-		dput(dentry);
-	}
+	rpc_purge_list(dentry ? &RPC_I(dentry->d_inode)->waitq : NULL,
+			&free_list, destroy_msg, -ETIMEDOUT);
+	dput(dentry);
 }
 
 ssize_t rpc_pipe_generic_upcall(struct file *filp, struct rpc_pipe_msg *msg,
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index 7e9baaa..3ee7461 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -1374,7 +1374,8 @@
 						sizeof(req->rq_snd_buf));
 		return bc_send(req);
 	} else {
-		/* Nothing to do to drop request */
+		/* drop request */
+		xprt_free_bc_request(req);
 		return 0;
 	}
 }
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
index d2a19b0f..89baa33 100644
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -42,6 +42,7 @@
 	cfg80211_hold_bss(bss_from_pub(bss));
 	wdev->current_bss = bss_from_pub(bss);
 
+	wdev->sme_state = CFG80211_SME_CONNECTED;
 	cfg80211_upload_connect_keys(wdev);
 
 	nl80211_send_ibss_bssid(wiphy_to_dev(wdev->wiphy), dev, bssid,
@@ -60,7 +61,7 @@
 	struct cfg80211_event *ev;
 	unsigned long flags;
 
-	CFG80211_DEV_WARN_ON(!wdev->ssid_len);
+	CFG80211_DEV_WARN_ON(wdev->sme_state != CFG80211_SME_CONNECTING);
 
 	ev = kzalloc(sizeof(*ev), gfp);
 	if (!ev)
@@ -115,9 +116,11 @@
 #ifdef CONFIG_CFG80211_WEXT
 	wdev->wext.ibss.channel = params->channel;
 #endif
+	wdev->sme_state = CFG80211_SME_CONNECTING;
 	err = rdev->ops->join_ibss(&rdev->wiphy, dev, params);
 	if (err) {
 		wdev->connect_keys = NULL;
+		wdev->sme_state = CFG80211_SME_IDLE;
 		return err;
 	}
 
@@ -169,6 +172,7 @@
 	}
 
 	wdev->current_bss = NULL;
+	wdev->sme_state = CFG80211_SME_IDLE;
 	wdev->ssid_len = 0;
 #ifdef CONFIG_CFG80211_WEXT
 	if (!nowext)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 15f3474..baf5704 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1389,7 +1389,7 @@
 	spin_unlock(&reg_requests_lock);
 
 	if (last_request->initiator == NL80211_REGDOM_SET_BY_USER)
-		cancel_delayed_work_sync(&reg_timeout);
+		cancel_delayed_work(&reg_timeout);
 
 	if (need_more_processing)
 		schedule_work(&reg_work);
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 55d9946..316cfd0 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -804,7 +804,7 @@
 	     ntype == NL80211_IFTYPE_P2P_CLIENT))
 		return -EBUSY;
 
-	if (ntype != otype) {
+	if (ntype != otype && netif_running(dev)) {
 		err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr,
 						    ntype);
 		if (err)
@@ -935,6 +935,7 @@
 				  enum nl80211_iftype iftype)
 {
 	struct wireless_dev *wdev_iter;
+	u32 used_iftypes = BIT(iftype);
 	int num[NUM_NL80211_IFTYPES];
 	int total = 1;
 	int i, j;
@@ -961,6 +962,7 @@
 
 		num[wdev_iter->iftype]++;
 		total++;
+		used_iftypes |= BIT(wdev_iter->iftype);
 	}
 	mutex_unlock(&rdev->devlist_mtx);
 
@@ -970,6 +972,7 @@
 	for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) {
 		const struct ieee80211_iface_combination *c;
 		struct ieee80211_iface_limit *limits;
+		u32 all_iftypes = 0;
 
 		c = &rdev->wiphy.iface_combinations[i];
 
@@ -984,6 +987,7 @@
 			if (rdev->wiphy.software_iftypes & BIT(iftype))
 				continue;
 			for (j = 0; j < c->n_limits; j++) {
+				all_iftypes |= limits[j].types;
 				if (!(limits[j].types & BIT(iftype)))
 					continue;
 				if (limits[j].max < num[iftype])
@@ -991,7 +995,20 @@
 				limits[j].max -= num[iftype];
 			}
 		}
-		/* yay, it fits */
+
+		/*
+		 * Finally check that all iftypes that we're currently
+		 * using are actually part of this combination. If they
+		 * aren't then we can't use this combination and have
+		 * to continue to the next.
+		 */
+		if ((all_iftypes & used_iftypes) != used_iftypes)
+			goto cont;
+
+		/*
+		 * This combination covered all interface types and
+		 * supported the requested numbers, so we're good.
+		 */
 		kfree(limits);
 		return 0;
  cont:
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 0948c6b..8b673dd 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -83,6 +83,8 @@
 push(@signature_tags, "Reviewed-by:");
 push(@signature_tags, "Acked-by:");
 
+my $signature_pattern = "\(" . join("|", @signature_tags) . "\)";
+
 # rfc822 email address - preloaded methods go here.
 my $rfc822_lwsp = "(?:(?:\\r\\n)?[ \\t])";
 my $rfc822_char = '[\\000-\\377]';
@@ -473,7 +475,6 @@
 my @status = ();
 my %deduplicate_name_hash = ();
 my %deduplicate_address_hash = ();
-my $signature_pattern;
 
 my @maintainers = get_maintainers();
 
diff --git a/scripts/gfp-translate b/scripts/gfp-translate
old mode 100644
new mode 100755
diff --git a/security/security.c b/security/security.c
index 3efc9b1..860aeb3 100644
--- a/security/security.c
+++ b/security/security.c
@@ -23,6 +23,7 @@
 #include <linux/mman.h>
 #include <linux/mount.h>
 #include <linux/personality.h>
+#include <linux/backing-dev.h>
 #include <net/flow.h>
 
 #define MAX_LSM_EVM_XATTR	2
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index a68aed7..ec2118d 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -502,10 +502,8 @@
 	if (stream->runtime->state != SNDRV_PCM_STATE_RUNNING)
 		return -EPERM;
 	retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_PAUSE_PUSH);
-	if (!retval) {
+	if (!retval)
 		stream->runtime->state = SNDRV_PCM_STATE_PAUSED;
-		wake_up(&stream->runtime->sleep);
-	}
 	return retval;
 }
 
@@ -544,6 +542,10 @@
 	if (!retval) {
 		stream->runtime->state = SNDRV_PCM_STATE_SETUP;
 		wake_up(&stream->runtime->sleep);
+		stream->runtime->hw_pointer = 0;
+		stream->runtime->app_pointer = 0;
+		stream->runtime->total_bytes_available = 0;
+		stream->runtime->total_bytes_transferred = 0;
 	}
 	return retval;
 }
diff --git a/sound/i2c/other/tea575x-tuner.c b/sound/i2c/other/tea575x-tuner.c
index 582aace..7eca25f 100644
--- a/sound/i2c/other/tea575x-tuner.c
+++ b/sound/i2c/other/tea575x-tuner.c
@@ -37,8 +37,8 @@
 MODULE_DESCRIPTION("Routines for control of TEA5757/5759 Philips AM/FM radio tuner chips");
 MODULE_LICENSE("GPL");
 
-#define FREQ_LO		 (76U * 16000)
-#define FREQ_HI		(108U * 16000)
+#define FREQ_LO		((tea->tea5759 ? 760 :  875) * 1600U)
+#define FREQ_HI		((tea->tea5759 ? 910 : 1080) * 1600U)
 
 /*
  * definitions
@@ -120,9 +120,9 @@
 	return data;
 }
 
-static u32 snd_tea575x_get_freq(struct snd_tea575x *tea)
+static u32 snd_tea575x_val_to_freq(struct snd_tea575x *tea, u32 val)
 {
-	u32 freq = snd_tea575x_read(tea) & TEA575X_BIT_FREQ_MASK;
+	u32 freq = val & TEA575X_BIT_FREQ_MASK;
 
 	if (freq == 0)
 		return freq;
@@ -139,6 +139,11 @@
 	return clamp(freq * 16, FREQ_LO, FREQ_HI); /* from kHz */
 }
 
+static u32 snd_tea575x_get_freq(struct snd_tea575x *tea)
+{
+	return snd_tea575x_val_to_freq(tea, snd_tea575x_read(tea));
+}
+
 static void snd_tea575x_set_freq(struct snd_tea575x *tea)
 {
 	u32 freq = tea->freq;
@@ -156,6 +161,7 @@
 	tea->val &= ~TEA575X_BIT_FREQ_MASK;
 	tea->val |= freq & TEA575X_BIT_FREQ_MASK;
 	snd_tea575x_write(tea, tea->val);
+	tea->freq = snd_tea575x_val_to_freq(tea, tea->val);
 }
 
 /*
@@ -317,7 +323,6 @@
 }
 
 static const struct v4l2_file_operations tea575x_fops = {
-	.owner		= THIS_MODULE,
 	.unlocked_ioctl	= video_ioctl2,
 	.open           = v4l2_fh_open,
 	.release        = v4l2_fh_release,
@@ -337,7 +342,6 @@
 };
 
 static const struct video_device tea575x_radio = {
-	.fops           = &tea575x_fops,
 	.ioctl_ops 	= &tea575x_ioctl_ops,
 	.release        = video_device_release_empty,
 };
@@ -349,7 +353,7 @@
 /*
  * initialize all the tea575x chips
  */
-int snd_tea575x_init(struct snd_tea575x *tea)
+int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner)
 {
 	int retval;
 
@@ -374,6 +378,9 @@
 	tea->vd.lock = &tea->mutex;
 	tea->vd.v4l2_dev = tea->v4l2_dev;
 	tea->vd.ctrl_handler = &tea->ctrl_handler;
+	tea->fops = tea575x_fops;
+	tea->fops.owner = owner;
+	tea->vd.fops = &tea->fops;
 	set_bit(V4L2_FL_USE_FH_PRIO, &tea->vd.flags);
 	/* disable hw_freq_seek if we can't use it */
 	if (tea->cannot_read_data)
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 67f47d8..52b5c0b 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -2769,7 +2769,7 @@
 	chip->tea.ops = &snd_es1968_tea_ops;
 	strlcpy(chip->tea.card, "SF64-PCE2", sizeof(chip->tea.card));
 	sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci));
-	if (!snd_tea575x_init(&chip->tea))
+	if (!snd_tea575x_init(&chip->tea, THIS_MODULE))
 		printk(KERN_INFO "es1968: detected TEA575x radio\n");
 #endif
 
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index f696623..b32e802 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -1254,7 +1254,7 @@
 	sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci));
 	if ((tea575x_tuner & TUNER_TYPE_MASK) > 0 &&
 	    (tea575x_tuner & TUNER_TYPE_MASK) < 4) {
-		if (snd_tea575x_init(&chip->tea)) {
+		if (snd_tea575x_init(&chip->tea, THIS_MODULE)) {
 			snd_printk(KERN_ERR "TEA575x radio not found\n");
 			snd_fm801_free(chip);
 			return -ENODEV;
@@ -1263,7 +1263,7 @@
 		/* autodetect tuner connection */
 		for (tea575x_tuner = 1; tea575x_tuner <= 3; tea575x_tuner++) {
 			chip->tea575x_tuner = tea575x_tuner;
-			if (!snd_tea575x_init(&chip->tea)) {
+			if (!snd_tea575x_init(&chip->tea, THIS_MODULE)) {
 				snd_printk(KERN_INFO "detected TEA575x radio type %s\n",
 					   get_tea575x_gpio(chip)->name);
 				break;
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index 163b6b5..d030797 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -97,19 +97,6 @@
 	  snd-hda-codec-realtek.
 	  This module is automatically loaded at probing.
 
-config SND_HDA_ENABLE_REALTEK_QUIRKS
-	bool "Build static quirks for Realtek codecs"
-	depends on SND_HDA_CODEC_REALTEK
-	default y
-	help
-	  Say Y here to build the static quirks codes for Realtek codecs.
-	  If you need the "model" preset that the default BIOS auto-parser
-	  can't handle, turn this option on.
-
-	  If your device works with model=auto option, basically you don't
-	  need the quirk code.  By turning this off, you can reduce the
-	  module size quite a lot.
-
 config SND_HDA_CODEC_ANALOG
 	bool "Build Analog Device HD-audio codec support"
 	default y
diff --git a/sound/pci/hda/hda_auto_parser.c b/sound/pci/hda/hda_auto_parser.c
index 6e9ef3e..f7520b9 100644
--- a/sound/pci/hda/hda_auto_parser.c
+++ b/sound/pci/hda/hda_auto_parser.c
@@ -618,7 +618,6 @@
 			  const struct hda_verb *list)
 {
 	const struct hda_verb **v;
-	snd_array_init(&spec->verbs, sizeof(struct hda_verb *), 8);
 	v = snd_array_new(&spec->verbs);
 	if (!v)
 		return -ENOMEM;
diff --git a/sound/pci/hda/hda_auto_parser.h b/sound/pci/hda/hda_auto_parser.h
index 2a7889d..632ad0a 100644
--- a/sound/pci/hda/hda_auto_parser.h
+++ b/sound/pci/hda/hda_auto_parser.h
@@ -157,4 +157,14 @@
 			const struct snd_pci_quirk *quirk,
 			const struct hda_fixup *fixlist);
 
+static inline void snd_hda_gen_init(struct hda_gen_spec *spec)
+{
+	snd_array_init(&spec->verbs, sizeof(struct hda_verb *), 8);
+}
+
+static inline void snd_hda_gen_free(struct hda_gen_spec *spec)
+{
+	snd_array_free(&spec->verbs);
+}
+
 #endif /* __SOUND_HDA_AUTO_PARSER_H */
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 41ca803..51cb2a2 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1184,6 +1184,7 @@
 {
 	if (!codec)
 		return;
+	snd_hda_jack_tbl_clear(codec);
 	restore_init_pincfgs(codec);
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	cancel_delayed_work(&codec->power_work);
@@ -1192,6 +1193,7 @@
 	list_del(&codec->list);
 	snd_array_free(&codec->mixers);
 	snd_array_free(&codec->nids);
+	snd_array_free(&codec->cvt_setups);
 	snd_array_free(&codec->conn_lists);
 	snd_array_free(&codec->spdif_out);
 	codec->bus->caddr_tbl[codec->addr] = NULL;
@@ -2333,6 +2335,8 @@
 	/* free only driver_pins so that init_pins + user_pins are restored */
 	snd_array_free(&codec->driver_pins);
 	restore_pincfgs(codec);
+	snd_array_free(&codec->cvt_setups);
+	snd_array_free(&codec->spdif_out);
 	codec->num_pcms = 0;
 	codec->pcm_info = NULL;
 	codec->preset = NULL;
@@ -4393,20 +4397,19 @@
 	codec->power_jiffies += delta;
 }
 
-/**
- * snd_hda_power_up - Power-up the codec
- * @codec: HD-audio codec
- *
- * Increment the power-up counter and power up the hardware really when
- * not turned on yet.
- */
-void snd_hda_power_up(struct hda_codec *codec)
+/* Transition to powered up, if wait_power_down then wait for a pending
+ * transition to D3 to complete. A pending D3 transition is indicated
+ * with power_transition == -1. */
+static void __snd_hda_power_up(struct hda_codec *codec, bool wait_power_down)
 {
 	struct hda_bus *bus = codec->bus;
 
 	spin_lock(&codec->power_lock);
 	codec->power_count++;
-	if (codec->power_on || codec->power_transition > 0) {
+	/* Return if power_on or transitioning to power_on, unless currently
+	 * powering down. */
+	if ((codec->power_on || codec->power_transition > 0) &&
+	    !(wait_power_down && codec->power_transition < 0)) {
 		spin_unlock(&codec->power_lock);
 		return;
 	}
@@ -4430,8 +4433,37 @@
 	codec->power_transition = 0;
 	spin_unlock(&codec->power_lock);
 }
+
+/**
+ * snd_hda_power_up - Power-up the codec
+ * @codec: HD-audio codec
+ *
+ * Increment the power-up counter and power up the hardware really when
+ * not turned on yet.
+ */
+void snd_hda_power_up(struct hda_codec *codec)
+{
+	__snd_hda_power_up(codec, false);
+}
 EXPORT_SYMBOL_HDA(snd_hda_power_up);
 
+/**
+ * snd_hda_power_up_d3wait - Power-up the codec after waiting for any pending
+ *   D3 transition to complete.  This differs from snd_hda_power_up() when
+ *   power_transition == -1.  snd_hda_power_up sees this case as a nop,
+ *   snd_hda_power_up_d3wait waits for the D3 transition to complete then powers
+ *   back up.
+ * @codec: HD-audio codec
+ *
+ * Cancel any power down operation hapenning on the work queue, then power up.
+ */
+void snd_hda_power_up_d3wait(struct hda_codec *codec)
+{
+	/* This will cancel and wait for pending power_work to complete. */
+	__snd_hda_power_up(codec, true);
+}
+EXPORT_SYMBOL_HDA(snd_hda_power_up_d3wait);
+
 #define power_save(codec)	\
 	((codec)->bus->power_save ? *(codec)->bus->power_save : 0)
 
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 4fc3960..2fdaadb 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -1056,10 +1056,12 @@
  */
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 void snd_hda_power_up(struct hda_codec *codec);
+void snd_hda_power_up_d3wait(struct hda_codec *codec);
 void snd_hda_power_down(struct hda_codec *codec);
 void snd_hda_update_power_acct(struct hda_codec *codec);
 #else
 static inline void snd_hda_power_up(struct hda_codec *codec) {}
+static inline void snd_hda_power_up_d3wait(struct hda_codec *codec) {}
 static inline void snd_hda_power_down(struct hda_codec *codec) {}
 #endif
 
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 2b6392b..7757536 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1766,7 +1766,7 @@
 				   buff_step);
 	snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
 				   buff_step);
-	snd_hda_power_up(apcm->codec);
+	snd_hda_power_up_d3wait(apcm->codec);
 	err = hinfo->ops.open(hinfo, apcm->codec, substream);
 	if (err < 0) {
 		azx_release_device(azx_dev);
@@ -2484,9 +2484,9 @@
 static int DELAYED_INIT_MARK azx_first_init(struct azx *chip);
 static int DELAYED_INIT_MARK azx_probe_continue(struct azx *chip);
 
+#ifdef SUPPORT_VGA_SWITCHEROO
 static struct pci_dev __devinit *get_bound_vga(struct pci_dev *pci);
 
-#ifdef SUPPORT_VGA_SWITCHEROO
 static void azx_vs_set_state(struct pci_dev *pci,
 			     enum vga_switcheroo_state state)
 {
@@ -2578,6 +2578,7 @@
 #else
 #define init_vga_switcheroo(chip)		/* NOP */
 #define register_vga_switcheroo(chip)		0
+#define check_hdmi_disabled(pci)	false
 #endif /* SUPPORT_VGA_SWITCHER */
 
 /*
@@ -2638,6 +2639,7 @@
 	return azx_free(device->device_data);
 }
 
+#ifdef SUPPORT_VGA_SWITCHEROO
 /*
  * Check of disabled HDMI controller by vga-switcheroo
  */
@@ -2670,12 +2672,13 @@
 	struct pci_dev *p = get_bound_vga(pci);
 
 	if (p) {
-		if (vga_default_device() && p != vga_default_device())
+		if (vga_switcheroo_get_client_state(p) == VGA_SWITCHEROO_OFF)
 			vga_inactive = true;
 		pci_dev_put(p);
 	}
 	return vga_inactive;
 }
+#endif /* SUPPORT_VGA_SWITCHEROO */
 
 /*
  * white/black-listing for position_fix
@@ -3351,6 +3354,11 @@
 	{ PCI_DEVICE(0x6549, 0x1200),
 	  .driver_data = AZX_DRIVER_TERA | AZX_DCAPS_NO_64BIT },
 	/* Creative X-Fi (CA0110-IBG) */
+	/* CTHDA chips */
+	{ PCI_DEVICE(0x1102, 0x0010),
+	  .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
+	{ PCI_DEVICE(0x1102, 0x0012),
+	  .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
 #if !defined(CONFIG_SND_CTXFI) && !defined(CONFIG_SND_CTXFI_MODULE)
 	/* the following entry conflicts with snd-ctxfi driver,
 	 * as ctxfi driver mutates from HD-audio to native mode with
@@ -3367,11 +3375,6 @@
 	  .driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
 	  AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
 #endif
-	/* CTHDA chips */
-	{ PCI_DEVICE(0x1102, 0x0010),
-	  .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
-	{ PCI_DEVICE(0x1102, 0x0012),
-	  .driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
 	/* Vortex86MX */
 	{ PCI_DEVICE(0x17f3, 0x3010), .driver_data = AZX_DRIVER_GENERIC },
 	/* VMware HDAudio */
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 3acb582..2bf99fc 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -445,8 +445,10 @@
 
 static void conexant_free(struct hda_codec *codec)
 {
+	struct conexant_spec *spec = codec->spec;
+	snd_hda_gen_free(&spec->gen);
 	snd_hda_detach_beep_device(codec);
-	kfree(codec->spec);
+	kfree(spec);
 }
 
 static const struct snd_kcontrol_new cxt_capture_mixers[] = {
@@ -4061,7 +4063,7 @@
 static int cx_auto_init(struct hda_codec *codec)
 {
 	struct conexant_spec *spec = codec->spec;
-	/*snd_hda_sequence_write(codec, cx_auto_init_verbs);*/
+	snd_hda_gen_apply_verbs(codec);
 	cx_auto_init_output(codec);
 	cx_auto_init_input(codec);
 	cx_auto_init_digital(codec);
@@ -4466,6 +4468,7 @@
 	SND_PCI_QUIRK(0x17aa, 0x21ce, "Lenovo T420", CXT_PINCFG_LENOVO_TP410),
 	SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410),
 	SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
+	SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC),
 	{}
 };
 
@@ -4497,6 +4500,7 @@
 	if (!spec)
 		return -ENOMEM;
 	codec->spec = spec;
+	snd_hda_gen_init(&spec->gen);
 
 	switch (codec->vendor_id) {
 	case 0x14f15045:
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 224410e..aa4c25e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1896,6 +1896,7 @@
 	alc_fix_pll(codec);
 	alc_auto_init_amp(codec, spec->init_amp);
 
+	snd_hda_gen_apply_verbs(codec);
 	alc_init_special_input_src(codec);
 	alc_auto_init_std(codec);
 
@@ -2288,6 +2289,7 @@
 	alc_shutup(codec);
 	alc_free_kctls(codec);
 	alc_free_bind_ctls(codec);
+	snd_hda_gen_free(&spec->gen);
 	kfree(spec);
 	snd_hda_detach_beep_device(codec);
 }
@@ -4252,6 +4254,7 @@
 		return -ENOMEM;
 	codec->spec = spec;
 	spec->mixer_nid = mixer_nid;
+	snd_hda_gen_init(&spec->gen);
 
 	err = alc_codec_rename_from_preset(codec);
 	if (err < 0) {
@@ -6439,6 +6442,7 @@
 	ALC662_FIXUP_ASUS_MODE7,
 	ALC662_FIXUP_ASUS_MODE8,
 	ALC662_FIXUP_NO_JACK_DETECT,
+	ALC662_FIXUP_ZOTAC_Z68,
 };
 
 static const struct alc_fixup alc662_fixups[] = {
@@ -6588,6 +6592,13 @@
 		.type = ALC_FIXUP_FUNC,
 		.v.func = alc_fixup_no_jack_detect,
 	},
+	[ALC662_FIXUP_ZOTAC_Z68] = {
+		.type = ALC_FIXUP_PINS,
+		.v.pins = (const struct alc_pincfg[]) {
+			{ 0x1b, 0x02214020 }, /* Front HP */
+			{ }
+		}
+	},
 };
 
 static const struct snd_pci_quirk alc662_fixup_tbl[] = {
@@ -6601,6 +6612,7 @@
 	SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
+	SND_PCI_QUIRK(0x19da, 0xa130, "Zotac Z68", ALC662_FIXUP_ZOTAC_Z68),
 	SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T),
 
 #if 0
@@ -6676,6 +6688,31 @@
 	{}
 };
 
+static void alc662_fill_coef(struct hda_codec *codec)
+{
+	int val, coef;
+
+	coef = alc_get_coef0(codec);
+
+	switch (codec->vendor_id) {
+	case 0x10ec0662:
+		if ((coef & 0x00f0) == 0x0030) {
+			val = alc_read_coef_idx(codec, 0x4); /* EAPD Ctrl */
+			alc_write_coef_idx(codec, 0x4, val & ~(1<<10));
+		}
+		break;
+	case 0x10ec0272:
+	case 0x10ec0273:
+	case 0x10ec0663:
+	case 0x10ec0665:
+	case 0x10ec0670:
+	case 0x10ec0671:
+	case 0x10ec0672:
+		val = alc_read_coef_idx(codec, 0xd); /* EAPD Ctrl */
+		alc_write_coef_idx(codec, 0xd, val | (1<<14));
+		break;
+	}
+}
 
 /*
  */
@@ -6695,12 +6732,8 @@
 
 	alc_fix_pll_init(codec, 0x20, 0x04, 15);
 
-	if ((alc_get_coef0(codec) & (1 << 14)) &&
-	    codec->bus->pci->subsystem_vendor == 0x1025 &&
-	    spec->cdefine.platform_type == 1) {
-		if (alc_codec_rename(codec, "ALC272X") < 0)
-			goto error;
-	}
+	spec->init_hook = alc662_fill_coef;
+	alc662_fill_coef(codec);
 
 	alc_pick_fixup(codec, alc662_fixup_models,
 		       alc662_fixup_tbl, alc662_fixups);
@@ -6708,6 +6741,13 @@
 
 	alc_auto_parse_customize_define(codec);
 
+	if ((alc_get_coef0(codec) & (1 << 14)) &&
+	    codec->bus->pci->subsystem_vendor == 0x1025 &&
+	    spec->cdefine.platform_type == 1) {
+		if (alc_codec_rename(codec, "ALC272X") < 0)
+			goto error;
+	}
+
 	/* automatic parse from the BIOS config */
 	err = alc662_parse_auto_config(codec);
 	if (err < 0)
@@ -6790,6 +6830,7 @@
 	{ .id = 0x10ec0272, .name = "ALC272", .patch = patch_alc662 },
 	{ .id = 0x10ec0275, .name = "ALC275", .patch = patch_alc269 },
 	{ .id = 0x10ec0276, .name = "ALC276", .patch = patch_alc269 },
+	{ .id = 0x10ec0280, .name = "ALC280", .patch = patch_alc269 },
 	{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
 	  .patch = patch_alc861 },
 	{ .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd },
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 7db8228..0767528 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4367,7 +4367,7 @@
 					 AC_PINCTL_IN_EN);
 	for (i = 0; i < spec->num_pwrs; i++)  {
 		hda_nid_t nid = spec->pwr_nids[i];
-		int pinctl, def_conf;
+		unsigned int pinctl, def_conf;
 
 		def_conf = snd_hda_codec_get_pincfg(codec, nid);
 		def_conf = get_defcfg_connect(def_conf);
@@ -4376,6 +4376,11 @@
 			stac_toggle_power_map(codec, nid, 0);
 			continue;
 		}
+		if (def_conf == AC_JACK_PORT_FIXED) {
+			/* no need for jack detection for fixed pins */
+			stac_toggle_power_map(codec, nid, 1);
+			continue;
+		}
 		/* power on when no jack detection is available */
 		/* or when the VREF is used for controlling LED */
 		if (!spec->hp_detect ||
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 64d2a4f..e9b62b5 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -935,9 +935,7 @@
 	}
 
 found:
-	data = snd_soc_read(codec, AIC3X_PLL_PROGA_REG);
-	snd_soc_write(codec, AIC3X_PLL_PROGA_REG,
-		      data | (pll_p << PLLP_SHIFT));
+	snd_soc_update_bits(codec, AIC3X_PLL_PROGA_REG, PLLP_MASK, pll_p);
 	snd_soc_write(codec, AIC3X_OVRF_STATUS_AND_PLLR_REG,
 		      pll_r << PLLR_SHIFT);
 	snd_soc_write(codec, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT);
diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h
index 6f097fb..08c7f66 100644
--- a/sound/soc/codecs/tlv320aic3x.h
+++ b/sound/soc/codecs/tlv320aic3x.h
@@ -166,6 +166,7 @@
 
 /* PLL registers bitfields */
 #define PLLP_SHIFT		0
+#define PLLP_MASK		7
 #define PLLQ_SHIFT		3
 #define PLLR_SHIFT		0
 #define PLLJ_SHIFT		2
diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c
index a75c376..0418fa1 100644
--- a/sound/soc/codecs/wm2000.c
+++ b/sound/soc/codecs/wm2000.c
@@ -99,8 +99,9 @@
 }
 
 static int wm2000_poll_bit(struct i2c_client *i2c,
-			   unsigned int reg, u8 mask, int timeout)
+			   unsigned int reg, u8 mask)
 {
+	int timeout = 4000;
 	int val;
 
 	val = wm2000_read(i2c, reg);
@@ -119,7 +120,7 @@
 static int wm2000_power_up(struct i2c_client *i2c, int analogue)
 {
 	struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
-	int ret, timeout;
+	int ret;
 
 	BUG_ON(wm2000->anc_mode != ANC_OFF);
 
@@ -140,13 +141,13 @@
 
 	/* Wait for ANC engine to become ready */
 	if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
-			     WM2000_ANC_ENG_IDLE, 1)) {
+			     WM2000_ANC_ENG_IDLE)) {
 		dev_err(&i2c->dev, "ANC engine failed to reset\n");
 		return -ETIMEDOUT;
 	}
 
 	if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-			     WM2000_STATUS_BOOT_COMPLETE, 1)) {
+			     WM2000_STATUS_BOOT_COMPLETE)) {
 		dev_err(&i2c->dev, "ANC engine failed to initialise\n");
 		return -ETIMEDOUT;
 	}
@@ -173,16 +174,13 @@
 	dev_dbg(&i2c->dev, "Download complete\n");
 
 	if (analogue) {
-		timeout = 248;
-		wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4);
+		wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
 
 		wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
 			     WM2000_MODE_ANA_SEQ_INCLUDE |
 			     WM2000_MODE_MOUSE_ENABLE |
 			     WM2000_MODE_THERMAL_ENABLE);
 	} else {
-		timeout = 10;
-
 		wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
 			     WM2000_MODE_MOUSE_ENABLE |
 			     WM2000_MODE_THERMAL_ENABLE);
@@ -201,9 +199,8 @@
 	wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
 
 	if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-			     WM2000_STATUS_MOUSE_ACTIVE, timeout)) {
-		dev_err(&i2c->dev, "Timed out waiting for device after %dms\n",
-			timeout * 10);
+			     WM2000_STATUS_MOUSE_ACTIVE)) {
+		dev_err(&i2c->dev, "Timed out waiting for device\n");
 		return -ETIMEDOUT;
 	}
 
@@ -218,28 +215,25 @@
 static int wm2000_power_down(struct i2c_client *i2c, int analogue)
 {
 	struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
-	int timeout;
 
 	if (analogue) {
-		timeout = 248;
-		wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4);
+		wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
 		wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
 			     WM2000_MODE_ANA_SEQ_INCLUDE |
 			     WM2000_MODE_POWER_DOWN);
 	} else {
-		timeout = 10;
 		wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
 			     WM2000_MODE_POWER_DOWN);
 	}
 
 	if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-			     WM2000_STATUS_POWER_DOWN_COMPLETE, timeout)) {
+			     WM2000_STATUS_POWER_DOWN_COMPLETE)) {
 		dev_err(&i2c->dev, "Timeout waiting for ANC power down\n");
 		return -ETIMEDOUT;
 	}
 
 	if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
-			     WM2000_ANC_ENG_IDLE, 1)) {
+			     WM2000_ANC_ENG_IDLE)) {
 		dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
 		return -ETIMEDOUT;
 	}
@@ -268,13 +262,13 @@
 	}
 
 	if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-			     WM2000_STATUS_ANC_DISABLED, 10)) {
+			     WM2000_STATUS_ANC_DISABLED)) {
 		dev_err(&i2c->dev, "Timeout waiting for ANC disable\n");
 		return -ETIMEDOUT;
 	}
 
 	if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
-			     WM2000_ANC_ENG_IDLE, 1)) {
+			     WM2000_ANC_ENG_IDLE)) {
 		dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
 		return -ETIMEDOUT;
 	}
@@ -311,7 +305,7 @@
 	wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
 
 	if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-			     WM2000_STATUS_MOUSE_ACTIVE, 10)) {
+			     WM2000_STATUS_MOUSE_ACTIVE)) {
 		dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
 		return -ETIMEDOUT;
 	}
@@ -325,38 +319,32 @@
 static int wm2000_enter_standby(struct i2c_client *i2c, int analogue)
 {
 	struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
-	int timeout;
 
 	BUG_ON(wm2000->anc_mode != ANC_ACTIVE);
 
 	if (analogue) {
-		timeout = 248;
-		wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4);
+		wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4);
 
 		wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
 			     WM2000_MODE_ANA_SEQ_INCLUDE |
 			     WM2000_MODE_THERMAL_ENABLE |
 			     WM2000_MODE_STANDBY_ENTRY);
 	} else {
-		timeout = 10;
-
 		wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
 			     WM2000_MODE_THERMAL_ENABLE |
 			     WM2000_MODE_STANDBY_ENTRY);
 	}
 
 	if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-			     WM2000_STATUS_ANC_DISABLED, timeout)) {
+			     WM2000_STATUS_ANC_DISABLED)) {
 		dev_err(&i2c->dev,
 			"Timed out waiting for ANC disable after 1ms\n");
 		return -ETIMEDOUT;
 	}
 
-	if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE,
-			     1)) {
+	if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE)) {
 		dev_err(&i2c->dev,
-			"Timed out waiting for standby after %dms\n",
-			timeout * 10);
+			"Timed out waiting for standby\n");
 		return -ETIMEDOUT;
 	}
 
@@ -374,23 +362,19 @@
 static int wm2000_exit_standby(struct i2c_client *i2c, int analogue)
 {
 	struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
-	int timeout;
 
 	BUG_ON(wm2000->anc_mode != ANC_STANDBY);
 
 	wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0);
 
 	if (analogue) {
-		timeout = 248;
-		wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4);
+		wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4);
 
 		wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
 			     WM2000_MODE_ANA_SEQ_INCLUDE |
 			     WM2000_MODE_THERMAL_ENABLE |
 			     WM2000_MODE_MOUSE_ENABLE);
 	} else {
-		timeout = 10;
-
 		wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
 			     WM2000_MODE_THERMAL_ENABLE |
 			     WM2000_MODE_MOUSE_ENABLE);
@@ -400,9 +384,8 @@
 	wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
 
 	if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
-			     WM2000_STATUS_MOUSE_ACTIVE, timeout)) {
-		dev_err(&i2c->dev, "Timed out waiting for MOUSE after %dms\n",
-			timeout * 10);
+			     WM2000_STATUS_MOUSE_ACTIVE)) {
+		dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
 		return -ETIMEDOUT;
 	}
 
diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c
index acbdc5f..32682c1 100644
--- a/sound/soc/codecs/wm2200.c
+++ b/sound/soc/codecs/wm2200.c
@@ -1491,6 +1491,7 @@
 
 static int wm2200_bclk_rates_cd[WM2200_NUM_BCLK_RATES] = {
 	5644800,
+	3763200,
 	2882400,
 	1881600,
 	1411200,
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 65d525d..812acd8 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -1863,6 +1863,7 @@
 				return ret;
 			}
 
+			regcache_cache_only(wm8904->regmap, false);
 			regcache_sync(wm8904->regmap);
 
 			/* Enable bias */
@@ -1899,14 +1900,8 @@
 		snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
 				    WM8904_BIAS_ENA, 0);
 
-#ifdef CONFIG_REGULATOR
-		/* Post 2.6.34 we will be able to get a callback when
-		 * the regulators are disabled which we can use but
-		 * for now just assume that the power will be cut if
-		 * the regulator API is in use.
-		 */
-		codec->cache_sync = 1;
-#endif
+		regcache_cache_only(wm8904->regmap, true);
+		regcache_mark_dirty(wm8904->regmap);
 
 		regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies),
 				       wm8904->supplies);
@@ -2084,10 +2079,8 @@
 {
 	struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
 	struct wm8904_pdata *pdata = wm8904->pdata;
-	u16 *reg_cache = codec->reg_cache;
 	int ret, i;
 
-	codec->cache_sync = 1;
 	codec->control_data = wm8904->regmap;
 
 	switch (wm8904->devtype) {
@@ -2150,6 +2143,7 @@
 		goto err_enable;
 	}
 
+	regcache_cache_only(wm8904->regmap, true);
 	/* Change some default settings - latch VU and enable ZC */
 	snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_LEFT,
 			    WM8904_ADC_VU, WM8904_ADC_VU);
@@ -2180,14 +2174,18 @@
 			if (!pdata->gpio_cfg[i])
 				continue;
 
-			reg_cache[WM8904_GPIO_CONTROL_1 + i]
-				= pdata->gpio_cfg[i] & 0xffff;
+			regmap_update_bits(wm8904->regmap,
+					   WM8904_GPIO_CONTROL_1 + i,
+					   0xffff,
+					   pdata->gpio_cfg[i]);
 		}
 
 		/* Zero is the default value for these anyway */
 		for (i = 0; i < WM8904_MIC_REGS; i++)
-			reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
-				= pdata->mic_cfg[i];
+			regmap_update_bits(wm8904->regmap,
+					   WM8904_MIC_BIAS_CONTROL_0 + i,
+					   0xffff,
+					   pdata->mic_cfg[i]);
 	}
 
 	/* Set Class W by default - this will be managed by the Class
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 993639d6..1436b6c 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -46,6 +46,39 @@
 #define WM8994_NUM_DRC 3
 #define WM8994_NUM_EQ  3
 
+static struct {
+	unsigned int reg;
+	unsigned int mask;
+} wm8994_vu_bits[] = {
+	{ WM8994_LEFT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU },
+	{ WM8994_RIGHT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU },
+	{ WM8994_LEFT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU },
+	{ WM8994_RIGHT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU },
+	{ WM8994_SPEAKER_VOLUME_LEFT, WM8994_SPKOUT_VU },
+	{ WM8994_SPEAKER_VOLUME_RIGHT, WM8994_SPKOUT_VU },
+	{ WM8994_LEFT_OUTPUT_VOLUME, WM8994_HPOUT1_VU },
+	{ WM8994_RIGHT_OUTPUT_VOLUME, WM8994_HPOUT1_VU },
+	{ WM8994_LEFT_OPGA_VOLUME, WM8994_MIXOUT_VU },
+	{ WM8994_RIGHT_OPGA_VOLUME, WM8994_MIXOUT_VU },
+
+	{ WM8994_AIF1_DAC1_LEFT_VOLUME, WM8994_AIF1DAC1_VU },
+	{ WM8994_AIF1_DAC1_RIGHT_VOLUME, WM8994_AIF1DAC1_VU },
+	{ WM8994_AIF1_DAC2_LEFT_VOLUME, WM8994_AIF1DAC2_VU },
+	{ WM8994_AIF1_DAC2_RIGHT_VOLUME, WM8994_AIF1DAC2_VU },
+	{ WM8994_AIF2_DAC_LEFT_VOLUME, WM8994_AIF2DAC_VU },
+	{ WM8994_AIF2_DAC_RIGHT_VOLUME, WM8994_AIF2DAC_VU },
+	{ WM8994_AIF1_ADC1_LEFT_VOLUME, WM8994_AIF1ADC1_VU },
+	{ WM8994_AIF1_ADC1_RIGHT_VOLUME, WM8994_AIF1ADC1_VU },
+	{ WM8994_AIF1_ADC2_LEFT_VOLUME, WM8994_AIF1ADC2_VU },
+	{ WM8994_AIF1_ADC2_RIGHT_VOLUME, WM8994_AIF1ADC2_VU },
+	{ WM8994_AIF2_ADC_LEFT_VOLUME, WM8994_AIF2ADC_VU },
+	{ WM8994_AIF2_ADC_RIGHT_VOLUME, WM8994_AIF1ADC2_VU },
+	{ WM8994_DAC1_LEFT_VOLUME, WM8994_DAC1_VU },
+	{ WM8994_DAC1_RIGHT_VOLUME, WM8994_DAC1_VU },
+	{ WM8994_DAC2_LEFT_VOLUME, WM8994_DAC2_VU },
+	{ WM8994_DAC2_RIGHT_VOLUME, WM8994_DAC2_VU },
+};
+
 static int wm8994_drc_base[] = {
 	WM8994_AIF1_DRC1_1,
 	WM8994_AIF1_DRC2_1,
@@ -694,9 +727,6 @@
 	if (!wm8994->jackdet || !wm8994->jack_cb)
 		return;
 
-	if (!wm8994->jackdet || !wm8994->jack_cb)
-		return;
-
 	if (wm8994->active_refcount)
 		mode = WM1811_JACKDET_MODE_AUDIO;
 
@@ -989,6 +1019,7 @@
 	struct snd_soc_codec *codec = w->codec;
 	struct wm8994 *control = codec->control_data;
 	int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA;
+	int i;
 	int dac;
 	int adc;
 	int val;
@@ -1047,6 +1078,13 @@
 				    WM8994_AIF1DAC2L_ENA);
 		break;
 
+	case SND_SOC_DAPM_POST_PMU:
+		for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+			snd_soc_write(codec, wm8994_vu_bits[i].reg,
+				      snd_soc_read(codec,
+						   wm8994_vu_bits[i].reg));
+		break;
+
 	case SND_SOC_DAPM_PRE_PMD:
 	case SND_SOC_DAPM_POST_PMD:
 		snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
@@ -1072,6 +1110,7 @@
 		      struct snd_kcontrol *kcontrol, int event)
 {
 	struct snd_soc_codec *codec = w->codec;
+	int i;
 	int dac;
 	int adc;
 	int val;
@@ -1122,6 +1161,13 @@
 				    WM8994_AIF2DACR_ENA);
 		break;
 
+	case SND_SOC_DAPM_POST_PMU:
+		for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+			snd_soc_write(codec, wm8994_vu_bits[i].reg,
+				      snd_soc_read(codec,
+						   wm8994_vu_bits[i].reg));
+		break;
+
 	case SND_SOC_DAPM_PRE_PMD:
 	case SND_SOC_DAPM_POST_PMD:
 		snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
@@ -1190,17 +1236,19 @@
 	switch (event) {
 	case SND_SOC_DAPM_PRE_PMU:
 		if (wm8994->aif1clk_enable) {
-			aif1clk_ev(w, kcontrol, event);
+			aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU);
 			snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
 					    WM8994_AIF1CLK_ENA_MASK,
 					    WM8994_AIF1CLK_ENA);
+			aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU);
 			wm8994->aif1clk_enable = 0;
 		}
 		if (wm8994->aif2clk_enable) {
-			aif2clk_ev(w, kcontrol, event);
+			aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU);
 			snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
 					    WM8994_AIF2CLK_ENA_MASK,
 					    WM8994_AIF2CLK_ENA);
+			aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU);
 			wm8994->aif2clk_enable = 0;
 		}
 		break;
@@ -1221,15 +1269,17 @@
 	switch (event) {
 	case SND_SOC_DAPM_POST_PMD:
 		if (wm8994->aif1clk_disable) {
+			aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD);
 			snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
 					    WM8994_AIF1CLK_ENA_MASK, 0);
-			aif1clk_ev(w, kcontrol, event);
+			aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD);
 			wm8994->aif1clk_disable = 0;
 		}
 		if (wm8994->aif2clk_disable) {
+			aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD);
 			snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
 					    WM8994_AIF2CLK_ENA_MASK, 0);
-			aif2clk_ev(w, kcontrol, event);
+			aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD);
 			wm8994->aif2clk_disable = 0;
 		}
 		break;
@@ -1527,9 +1577,11 @@
 
 static const struct snd_soc_dapm_widget wm8994_lateclk_widgets[] = {
 SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, aif1clk_ev,
-		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+		    SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, aif2clk_ev,
-		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+		    SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MIXER("SPKL", WM8994_POWER_MANAGEMENT_3, 8, 0,
 		   left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
@@ -3879,39 +3931,11 @@
 
 	pm_runtime_put(codec->dev);
 
-	/* Latch volume updates (right only; we always do left then right). */
-	snd_soc_update_bits(codec, WM8994_AIF1_DAC1_LEFT_VOLUME,
-			    WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_DAC1_RIGHT_VOLUME,
-			    WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_DAC2_LEFT_VOLUME,
-			    WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_DAC2_RIGHT_VOLUME,
-			    WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF2_DAC_LEFT_VOLUME,
-			    WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
-	snd_soc_update_bits(codec, WM8994_AIF2_DAC_RIGHT_VOLUME,
-			    WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_ADC1_LEFT_VOLUME,
-			    WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_ADC1_RIGHT_VOLUME,
-			    WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_ADC2_LEFT_VOLUME,
-			    WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_ADC2_RIGHT_VOLUME,
-			    WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF2_ADC_LEFT_VOLUME,
-			    WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF2_ADC_RIGHT_VOLUME,
-			    WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
-	snd_soc_update_bits(codec, WM8994_DAC1_LEFT_VOLUME,
-			    WM8994_DAC1_VU, WM8994_DAC1_VU);
-	snd_soc_update_bits(codec, WM8994_DAC1_RIGHT_VOLUME,
-			    WM8994_DAC1_VU, WM8994_DAC1_VU);
-	snd_soc_update_bits(codec, WM8994_DAC2_LEFT_VOLUME,
-			    WM8994_DAC2_VU, WM8994_DAC2_VU);
-	snd_soc_update_bits(codec, WM8994_DAC2_RIGHT_VOLUME,
-			    WM8994_DAC2_VU, WM8994_DAC2_VU);
+	/* Latch volume update bits */
+	for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+		snd_soc_update_bits(codec, wm8994_vu_bits[i].reg,
+				    wm8994_vu_bits[i].mask,
+				    wm8994_vu_bits[i].mask);
 
 	/* Set the low bit of the 3D stereo depth so TLV matches */
 	snd_soc_update_bits(codec, WM8994_AIF1_DAC1_FILTERS_2,
diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c
index 8af422e..dc9b42b 100644
--- a/sound/soc/codecs/wm8996.c
+++ b/sound/soc/codecs/wm8996.c
@@ -2837,8 +2837,6 @@
 		}
 	}
 
-	regcache_cache_only(codec->control_data, true);
-
 	/* Apply platform data settings */
 	snd_soc_update_bits(codec, WM8996_LINE_INPUT_CONTROL,
 			    WM8996_INL_MODE_MASK | WM8996_INR_MODE_MASK,
@@ -3051,7 +3049,6 @@
 	for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++)
 		regulator_unregister_notifier(wm8996->supplies[i].consumer,
 					      &wm8996->disable_nb[i]);
-	regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
 
 	return 0;
 }
@@ -3206,14 +3203,15 @@
 	dev_info(&i2c->dev, "revision %c\n",
 		 (reg & WM8996_CHIP_REV_MASK) + 'A');
 
-	regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
-
 	ret = wm8996_reset(wm8996);
 	if (ret < 0) {
 		dev_err(&i2c->dev, "Failed to issue reset\n");
 		goto err_regmap;
 	}
 
+	regcache_cache_only(wm8996->regmap, true);
+	regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
+
 	wm8996_init_gpio(wm8996);
 
 	ret = snd_soc_register_codec(&i2c->dev,
diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
index f237003..0803274 100644
--- a/sound/soc/fsl/imx-audmux.c
+++ b/sound/soc/fsl/imx-audmux.c
@@ -26,6 +26,7 @@
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/pinctrl/consumer.h>
 
 #include "imx-audmux.h"
 
@@ -249,6 +250,7 @@
 static int __devinit imx_audmux_probe(struct platform_device *pdev)
 {
 	struct resource *res;
+	struct pinctrl *pinctrl;
 	const struct of_device_id *of_id =
 			of_match_device(imx_audmux_dt_ids, &pdev->dev);
 
@@ -257,6 +259,12 @@
 	if (!audmux_base)
 		return -EADDRNOTAVAIL;
 
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl)) {
+		dev_err(&pdev->dev, "setup pinctrl failed!");
+		return PTR_ERR(pinctrl);
+	}
+
 	audmux_clk = clk_get(&pdev->dev, "audmux");
 	if (IS_ERR(audmux_clk)) {
 		dev_dbg(&pdev->dev, "cannot get clock: %ld\n",
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 1c2aa7f..4da5fc5 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -33,7 +33,6 @@
 
 #include <mach/hardware.h>
 #include <mach/dma.h>
-#include <mach/audio.h>
 
 #include "../../arm/pxa2xx-pcm.h"
 #include "pxa-ssp.h"
@@ -194,7 +193,7 @@
 {
 	u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
 
-	if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
+	if (ssp->type == PXA25x_SSP) {
 		sscr0 &= ~0x0000ff00;
 		sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
 	} else {
@@ -212,7 +211,7 @@
 	u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
 	u32 div;
 
-	if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
+	if (ssp->type == PXA25x_SSP)
 		div = ((sscr0 >> 8) & 0xff) * 2 + 2;
 	else
 		div = ((sscr0 >> 8) & 0xfff) + 1;
@@ -242,7 +241,7 @@
 		break;
 	case PXA_SSP_CLK_PLL:
 		/* Internal PLL is fixed */
-		if (cpu_is_pxa25x())
+		if (ssp->type == PXA25x_SSP)
 			priv->sysclk = 1843200;
 		else
 			priv->sysclk = 13000000;
@@ -266,11 +265,11 @@
 
 	/* The SSP clock must be disabled when changing SSP clock mode
 	 * on PXA2xx.  On PXA3xx it must be enabled when doing so. */
-	if (!cpu_is_pxa3xx())
+	if (ssp->type != PXA3xx_SSP)
 		clk_disable(ssp->clk);
 	val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0;
 	pxa_ssp_write_reg(ssp, SSCR0, val);
-	if (!cpu_is_pxa3xx())
+	if (ssp->type != PXA3xx_SSP)
 		clk_enable(ssp->clk);
 
 	return 0;
@@ -294,24 +293,20 @@
 	case PXA_SSP_AUDIO_DIV_SCDB:
 		val = pxa_ssp_read_reg(ssp, SSACD);
 		val &= ~SSACD_SCDB;
-#if defined(CONFIG_PXA3xx)
-		if (cpu_is_pxa3xx())
+		if (ssp->type == PXA3xx_SSP)
 			val &= ~SSACD_SCDX8;
-#endif
 		switch (div) {
 		case PXA_SSP_CLK_SCDB_1:
 			val |= SSACD_SCDB;
 			break;
 		case PXA_SSP_CLK_SCDB_4:
 			break;
-#if defined(CONFIG_PXA3xx)
 		case PXA_SSP_CLK_SCDB_8:
-			if (cpu_is_pxa3xx())
+			if (ssp->type == PXA3xx_SSP)
 				val |= SSACD_SCDX8;
 			else
 				return -EINVAL;
 			break;
-#endif
 		default:
 			return -EINVAL;
 		}
@@ -337,10 +332,8 @@
 	struct ssp_device *ssp = priv->ssp;
 	u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70;
 
-#if defined(CONFIG_PXA3xx)
-	if (cpu_is_pxa3xx())
+	if (ssp->type == PXA3xx_SSP)
 		pxa_ssp_write_reg(ssp, SSACDD, 0);
-#endif
 
 	switch (freq_out) {
 	case 5622000:
@@ -365,11 +358,10 @@
 		break;
 
 	default:
-#ifdef CONFIG_PXA3xx
 		/* PXA3xx has a clock ditherer which can be used to generate
 		 * a wider range of frequencies - calculate a value for it.
 		 */
-		if (cpu_is_pxa3xx()) {
+		if (ssp->type == PXA3xx_SSP) {
 			u32 val;
 			u64 tmp = 19968;
 			tmp *= 1000000;
@@ -386,7 +378,6 @@
 				val, freq_out);
 			break;
 		}
-#endif
 
 		return -EINVAL;
 	}
@@ -590,10 +581,8 @@
 	/* bit size */
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S16_LE:
-#ifdef CONFIG_PXA3xx
-		if (cpu_is_pxa3xx())
+		if (ssp->type == PXA3xx_SSP)
 			sscr0 |= SSCR0_FPCKE;
-#endif
 		sscr0 |= SSCR0_DataSize(16);
 		break;
 	case SNDRV_PCM_FORMAT_S24_LE:
@@ -618,9 +607,7 @@
 			* trying and failing a lot; some of the registers
 			* needed for that mode are only available on PXA3xx.
 			*/
-
-#ifdef CONFIG_PXA3xx
-			if (!cpu_is_pxa3xx())
+			if (ssp->type != PXA3xx_SSP)
 				return -EINVAL;
 
 			sspsp |= SSPSP_SFRMWDTH(width * 2);
@@ -628,9 +615,6 @@
 			sspsp |= SSPSP_EDMYSTOP(3);
 			sspsp |= SSPSP_DMYSTOP(3);
 			sspsp |= SSPSP_DMYSTRT(1);
-#else
-			return -EINVAL;
-#endif
 		} else {
 			/* The frame width is the width the LRCLK is
 			 * asserted for; the delay is expressed in
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 90ee77d..89eae93 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -913,7 +913,7 @@
 			/* do we need to add this widget to the list ? */
 			if (list) {
 				int err;
-				err = dapm_list_add_widget(list, path->sink);
+				err = dapm_list_add_widget(list, path->source);
 				if (err < 0) {
 					dev_err(widget->dapm->dev, "could not add widget %s\n",
 						widget->name);
@@ -954,7 +954,7 @@
 	if (stream == SNDRV_PCM_STREAM_PLAYBACK)
 		paths = is_connected_output_ep(dai->playback_widget, list);
 	else
-		paths = is_connected_input_ep(dai->playback_widget, list);
+		paths = is_connected_input_ep(dai->capture_widget, list);
 
 	trace_snd_soc_dapm_connected(paths, stream);
 	dapm_clear_walk(&card->dapm);
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index bedd171..48fd15b 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -794,6 +794,9 @@
 		for (i = 0; i < card->num_links; i++) {
 			be = &card->rtd[i];
 
+			if (!be->dai_link->no_pcm)
+				continue;
+
 			if (be->cpu_dai->playback_widget == widget ||
 				be->codec_dai->playback_widget == widget)
 				return be;
@@ -803,6 +806,9 @@
 		for (i = 0; i < card->num_links; i++) {
 			be = &card->rtd[i];
 
+			if (!be->dai_link->no_pcm)
+				continue;
+
 			if (be->cpu_dai->capture_widget == widget ||
 				be->codec_dai->capture_widget == widget)
 				return be;
diff --git a/sound/soc/tegra/tegra30_ahub.c b/sound/soc/tegra/tegra30_ahub.c
index 57cd419..f43edb3 100644
--- a/sound/soc/tegra/tegra30_ahub.c
+++ b/sound/soc/tegra/tegra30_ahub.c
@@ -629,3 +629,4 @@
 MODULE_DESCRIPTION("Tegra30 AHUB driver");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DEVICE_TABLE(of, tegra30_ahub_of_match);
diff --git a/sound/soc/tegra/tegra_wm8903.c b/sound/soc/tegra/tegra_wm8903.c
index 0b0df49..3b6da91 100644
--- a/sound/soc/tegra/tegra_wm8903.c
+++ b/sound/soc/tegra/tegra_wm8903.c
@@ -346,6 +346,17 @@
 	return 0;
 }
 
+static int tegra_wm8903_remove(struct snd_soc_card *card)
+{
+	struct snd_soc_pcm_runtime *rtd = &(card->rtd[0]);
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_codec *codec = codec_dai->codec;
+
+	wm8903_mic_detect(codec, NULL, 0, 0);
+
+	return 0;
+}
+
 static struct snd_soc_dai_link tegra_wm8903_dai = {
 	.name = "WM8903",
 	.stream_name = "WM8903 PCM",
@@ -363,6 +374,8 @@
 	.dai_link = &tegra_wm8903_dai,
 	.num_links = 1,
 
+	.remove = tegra_wm8903_remove,
+
 	.controls = tegra_wm8903_controls,
 	.num_controls = ARRAY_SIZE(tegra_wm8903_controls),
 	.dapm_widgets = tegra_wm8903_dapm_widgets,
diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c
index 6f9715a..56ad923 100644
--- a/sound/usb/6fire/firmware.c
+++ b/sound/usb/6fire/firmware.c
@@ -209,7 +209,7 @@
 	int ret;
 	u8 data;
 	struct usb_device *device = interface_to_usbdev(intf);
-	const struct firmware *fw = 0;
+	const struct firmware *fw = NULL;
 	struct ihex_record *rec = kmalloc(sizeof(struct ihex_record),
 			GFP_KERNEL);
 
diff --git a/sound/usb/card.h b/sound/usb/card.h
index 0d37238..2b9ffff 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -119,6 +119,7 @@
 	unsigned long unlink_mask;	/* bitmask of unlinked urbs */
 
 	/* data and sync endpoints for this stream */
+	unsigned int ep_num;		/* the endpoint number */
 	struct snd_usb_endpoint *data_endpoint;
 	struct snd_usb_endpoint *sync_endpoint;
 	unsigned long flags;
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index 41daaa2..e71fe55 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -341,6 +341,14 @@
 		.map = audigy2nx_map,
 		.selector_map = audigy2nx_selectors,
 	},
+	{	/* Logitech, Inc. QuickCam Pro for Notebooks */
+		.id = USB_ID(0x046d, 0x0991),
+		.ignore_ctl_error = 1,
+	},
+	{	/* Logitech, Inc. QuickCam E 3500 */
+		.id = USB_ID(0x046d, 0x09a4),
+		.ignore_ctl_error = 1,
+	},
 	{
 		/* Hercules DJ Console (Windows Edition) */
 		.id = USB_ID(0x06f8, 0xb000),
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index cdf8b76..54607f8 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -354,17 +354,21 @@
 		    (get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
 		     get_endpoint(alts, 1)->bSynchAddress != 0 &&
 		     !implicit_fb)) {
-			snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
-				   dev->devnum, fmt->iface, fmt->altsetting);
+			snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. bmAttributes %02x, bLength %d, bSynchAddress %02x\n",
+				   dev->devnum, fmt->iface, fmt->altsetting,
+				   get_endpoint(alts, 1)->bmAttributes,
+				   get_endpoint(alts, 1)->bLength,
+				   get_endpoint(alts, 1)->bSynchAddress);
 			return -EINVAL;
 		}
 		ep = get_endpoint(alts, 1)->bEndpointAddress;
-		if (get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
+		if (!implicit_fb &&
+		    get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
 		    (( is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress | USB_DIR_IN)) ||
-		     (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)) ||
-		     ( is_playback && !implicit_fb))) {
-			snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
-				   dev->devnum, fmt->iface, fmt->altsetting);
+		     (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)))) {
+			snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. is_playback %d, ep %02x, bSynchAddress %02x\n",
+				   dev->devnum, fmt->iface, fmt->altsetting,
+				   is_playback, ep, get_endpoint(alts, 0)->bSynchAddress);
 			return -EINVAL;
 		}
 
@@ -1147,7 +1151,8 @@
 	return -EINVAL;
 }
 
-int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream,
+					     int cmd)
 {
 	int err;
 	struct snd_usb_substream *subs = substream->runtime->private_data;
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index d89ab4c..79780fa 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -1831,6 +1831,36 @@
 		}
 	}
 },
+{
+	USB_DEVICE(0x0582, 0x014d),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		/* .vendor_name = "BOSS", */
+		/* .product_name = "GT-100", */
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 1,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 3,
+				.type = QUIRK_MIDI_FIXED_ENDPOINT,
+				.data = & (const struct snd_usb_midi_endpoint_info) {
+					.out_cables = 0x0001,
+					.in_cables  = 0x0001
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 
 /* Guillemot devices */
 {
diff --git a/sound/usb/stream.c b/sound/usb/stream.c
index 6b7d7a2..083ed81 100644
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -97,6 +97,7 @@
 	subs->formats |= fp->formats;
 	subs->num_formats++;
 	subs->fmt_type = fp->fmt_type;
+	subs->ep_num = fp->endpoint;
 }
 
 /*
@@ -119,9 +120,7 @@
 		if (as->fmt_type != fp->fmt_type)
 			continue;
 		subs = &as->substream[stream];
-		if (!subs->data_endpoint)
-			continue;
-		if (subs->data_endpoint->ep_num == fp->endpoint) {
+		if (subs->ep_num == fp->endpoint) {
 			list_add_tail(&fp->list, &subs->fmt_list);
 			subs->num_formats++;
 			subs->formats |= fp->formats;
@@ -134,7 +133,7 @@
 		if (as->fmt_type != fp->fmt_type)
 			continue;
 		subs = &as->substream[stream];
-		if (subs->data_endpoint)
+		if (subs->ep_num)
 			continue;
 		err = snd_pcm_new_stream(as->pcm, stream, 1);
 		if (err < 0)
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index 146fd61..d9834b3 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -701,14 +701,18 @@
 	pfd.fd = fd;
 
 	while (1) {
+		struct sockaddr *addr_p = (struct sockaddr *) &addr;
+		socklen_t addr_l = sizeof(addr);
 		pfd.events = POLLIN;
 		pfd.revents = 0;
 		poll(&pfd, 1, -1);
 
-		len = recv(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0);
+		len = recvfrom(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0,
+				addr_p, &addr_l);
 
-		if (len < 0) {
-			syslog(LOG_ERR, "recv failed; error:%d", len);
+		if (len < 0 || addr.nl_pid) {
+			syslog(LOG_ERR, "recvfrom failed; pid:%u error:%d %s",
+					addr.nl_pid, errno, strerror(errno));
 			close(fd);
 			return -1;
 		}
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 2625899..07b5c77 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -1179,6 +1179,12 @@
 		fprintf(stderr, "cannot use both --output and --log-fd\n");
 		usage_with_options(stat_usage, options);
 	}
+
+	if (output_fd < 0) {
+		fprintf(stderr, "argument to --log-fd must be a > 0\n");
+		usage_with_options(stat_usage, options);
+	}
+
 	if (!output) {
 		struct timespec tm;
 		mode = append_file ? "a" : "w";
@@ -1190,7 +1196,7 @@
 		}
 		clock_gettime(CLOCK_REALTIME, &tm);
 		fprintf(output, "# started on %s\n", ctime(&tm.tv_sec));
-	} else if (output_fd != 2) {
+	} else if (output_fd > 0) {
 		mode = append_file ? "a" : "w";
 		output = fdopen(output_fd, mode);
 		if (!output) {
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 2dd5edf..e909d43 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -1942,7 +1942,6 @@
 		else
 			return -1;
 	} else if (ph->needs_swap) {
-		unsigned int i;
 		/*
 		 * feature bitmap is declared as an array of unsigned longs --
 		 * not good since its size can differ between the host that
@@ -1958,14 +1957,17 @@
 		 * file), punt and fallback to the original behavior --
 		 * clearing all feature bits and setting buildid.
 		 */
-		for (i = 0; i < BITS_TO_LONGS(HEADER_FEAT_BITS); ++i)
-			header->adds_features[i] = bswap_64(header->adds_features[i]);
+		mem_bswap_64(&header->adds_features,
+			    BITS_TO_U64(HEADER_FEAT_BITS));
 
 		if (!test_bit(HEADER_HOSTNAME, header->adds_features)) {
-			for (i = 0; i < BITS_TO_LONGS(HEADER_FEAT_BITS); ++i) {
-				header->adds_features[i] = bswap_64(header->adds_features[i]);
-				header->adds_features[i] = bswap_32(header->adds_features[i]);
-			}
+			/* unswap as u64 */
+			mem_bswap_64(&header->adds_features,
+				    BITS_TO_U64(HEADER_FEAT_BITS));
+
+			/* unswap as u32 */
+			mem_bswap_32(&header->adds_features,
+				    BITS_TO_U32(HEADER_FEAT_BITS));
 		}
 
 		if (!test_bit(HEADER_HOSTNAME, header->adds_features)) {
@@ -2091,6 +2093,35 @@
 	return ret <= 0 ? -1 : 0;
 }
 
+static int perf_evsel__set_tracepoint_name(struct perf_evsel *evsel)
+{
+	struct event_format *event = trace_find_event(evsel->attr.config);
+	char bf[128];
+
+	if (event == NULL)
+		return -1;
+
+	snprintf(bf, sizeof(bf), "%s:%s", event->system, event->name);
+	evsel->name = strdup(bf);
+	if (event->name == NULL)
+		return -1;
+
+	return 0;
+}
+
+static int perf_evlist__set_tracepoint_names(struct perf_evlist *evlist)
+{
+	struct perf_evsel *pos;
+
+	list_for_each_entry(pos, &evlist->entries, node) {
+		if (pos->attr.type == PERF_TYPE_TRACEPOINT &&
+		    perf_evsel__set_tracepoint_name(pos))
+			return -1;
+	}
+
+	return 0;
+}
+
 int perf_session__read_header(struct perf_session *session, int fd)
 {
 	struct perf_header *header = &session->header;
@@ -2172,6 +2203,9 @@
 
 	lseek(fd, header->data_offset, SEEK_SET);
 
+	if (perf_evlist__set_tracepoint_names(session->evlist))
+		goto out_delete_evlist;
+
 	header->frozen = 1;
 	return 0;
 out_errno:
diff --git a/tools/perf/util/include/linux/bitops.h b/tools/perf/util/include/linux/bitops.h
index f1584833..587a230 100644
--- a/tools/perf/util/include/linux/bitops.h
+++ b/tools/perf/util/include/linux/bitops.h
@@ -8,6 +8,8 @@
 #define BITS_PER_LONG __WORDSIZE
 #define BITS_PER_BYTE           8
 #define BITS_TO_LONGS(nr)       DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
+#define BITS_TO_U64(nr)         DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u64))
+#define BITS_TO_U32(nr)         DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u32))
 
 #define for_each_set_bit(bit, addr, size) \
 	for ((bit) = find_first_bit((addr), (size));		\
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 2600916..c3e399b 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -442,6 +442,16 @@
 			tool->finished_round = process_finished_round_stub;
 	}
 }
+ 
+void mem_bswap_32(void *src, int byte_size)
+{
+	u32 *m = src;
+	while (byte_size > 0) {
+		*m = bswap_32(*m);
+		byte_size -= sizeof(u32);
+		++m;
+	}
+}
 
 void mem_bswap_64(void *src, int byte_size)
 {
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 7a5434c..0c702e3 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -80,6 +80,7 @@
 bool perf_session__has_traces(struct perf_session *self, const char *msg);
 
 void mem_bswap_64(void *src, int byte_size);
+void mem_bswap_32(void *src, int byte_size);
 void perf_event__attr_swap(struct perf_event_attr *attr);
 
 int perf_session__create_kernel_maps(struct perf_session *self);
diff --git a/virt/kvm/assigned-dev.c b/virt/kvm/assigned-dev.c
index 01f572c..b1e091a 100644
--- a/virt/kvm/assigned-dev.c
+++ b/virt/kvm/assigned-dev.c
@@ -635,7 +635,6 @@
 	int r = 0, idx;
 	struct kvm_assigned_dev_kernel *match;
 	struct pci_dev *dev;
-	u8 header_type;
 
 	if (!(assigned_dev->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU))
 		return -EINVAL;
@@ -668,8 +667,7 @@
 	}
 
 	/* Don't allow bridges to be assigned */
-	pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
-	if ((header_type & PCI_HEADER_TYPE) != PCI_HEADER_TYPE_NORMAL) {
+	if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL) {
 		r = -EPERM;
 		goto out_put;
 	}
diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index f59c1e8..7d7e2aa 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -198,7 +198,7 @@
 }
 
 static int
-kvm_irqfd_assign(struct kvm *kvm, int fd, int gsi)
+kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args)
 {
 	struct kvm_irq_routing_table *irq_rt;
 	struct _irqfd *irqfd, *tmp;
@@ -212,12 +212,12 @@
 		return -ENOMEM;
 
 	irqfd->kvm = kvm;
-	irqfd->gsi = gsi;
+	irqfd->gsi = args->gsi;
 	INIT_LIST_HEAD(&irqfd->list);
 	INIT_WORK(&irqfd->inject, irqfd_inject);
 	INIT_WORK(&irqfd->shutdown, irqfd_shutdown);
 
-	file = eventfd_fget(fd);
+	file = eventfd_fget(args->fd);
 	if (IS_ERR(file)) {
 		ret = PTR_ERR(file);
 		goto fail;
@@ -298,19 +298,19 @@
  * shutdown any irqfd's that match fd+gsi
  */
 static int
-kvm_irqfd_deassign(struct kvm *kvm, int fd, int gsi)
+kvm_irqfd_deassign(struct kvm *kvm, struct kvm_irqfd *args)
 {
 	struct _irqfd *irqfd, *tmp;
 	struct eventfd_ctx *eventfd;
 
-	eventfd = eventfd_ctx_fdget(fd);
+	eventfd = eventfd_ctx_fdget(args->fd);
 	if (IS_ERR(eventfd))
 		return PTR_ERR(eventfd);
 
 	spin_lock_irq(&kvm->irqfds.lock);
 
 	list_for_each_entry_safe(irqfd, tmp, &kvm->irqfds.items, list) {
-		if (irqfd->eventfd == eventfd && irqfd->gsi == gsi) {
+		if (irqfd->eventfd == eventfd && irqfd->gsi == args->gsi) {
 			/*
 			 * This rcu_assign_pointer is needed for when
 			 * another thread calls kvm_irq_routing_update before
@@ -338,12 +338,15 @@
 }
 
 int
-kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
+kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
 {
-	if (flags & KVM_IRQFD_FLAG_DEASSIGN)
-		return kvm_irqfd_deassign(kvm, fd, gsi);
+	if (args->flags & ~KVM_IRQFD_FLAG_DEASSIGN)
+		return -EINVAL;
 
-	return kvm_irqfd_assign(kvm, fd, gsi);
+	if (args->flags & KVM_IRQFD_FLAG_DEASSIGN)
+		return kvm_irqfd_deassign(kvm, args);
+
+	return kvm_irqfd_assign(kvm, args);
 }
 
 /*
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 7e14068..44ee712 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2047,7 +2047,7 @@
 		r = -EFAULT;
 		if (copy_from_user(&data, argp, sizeof data))
 			goto out;
-		r = kvm_irqfd(kvm, data.fd, data.gsi, data.flags);
+		r = kvm_irqfd(kvm, &data);
 		break;
 	}
 	case KVM_IOEVENTFD: {
@@ -2845,6 +2845,7 @@
 	kvm_arch_hardware_unsetup();
 	kvm_arch_exit();
 	free_cpumask_var(cpus_hardware_enabled);
+	__free_page(fault_page);
 	__free_page(hwpoison_page);
 	__free_page(bad_page);
 }