diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 8ffbc25..840f7d6 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -165,3 +165,21 @@
 
 		Not all drivers support this attribute.  If it isn't supported,
 		attempts to read or write it will yield I/O errors.
+
+What:		/sys/devices/.../power/pm_qos_latency_us
+Date:		March 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/pm_qos_resume_latency_us attribute
+		contains the PM QoS resume latency limit for the given device,
+		which is the maximum allowed time it can take to resume the
+		device, after it has been suspended at run time, from a resume
+		request to the moment the device will be ready to process I/O,
+		in microseconds.  If it is equal to 0, however, this means that
+		the PM QoS resume latency may be arbitrary.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
new file mode 100644
index 0000000..6528e21
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -0,0 +1,21 @@
+* Samsung Exynos Power Domains
+
+Exynos processors include support for multiple power domains which are used
+to gate power to one or more peripherals on the processor.
+
+Required Properties:
+- compatiable: should be one of the following.
+    * samsung,exynos4210-pd - for exynos4210 type power domain.
+- reg: physical base address of the controller and length of memory mapped
+    region.
+
+Optional Properties:
+- samsung,exynos4210-pd-off: Specifies that the power domain is in turned-off
+    state during boot and remains to be turned-off until explicitly turned-on.
+
+Example:
+
+	lcd0: power-domain-lcd0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C00 0x10>;
+	};
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 20af7de..872815c 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -96,6 +96,12 @@
 	int (*thaw)(struct device *dev);
 	int (*poweroff)(struct device *dev);
 	int (*restore)(struct device *dev);
+	int (*suspend_late)(struct device *dev);
+	int (*resume_early)(struct device *dev);
+	int (*freeze_late)(struct device *dev);
+	int (*thaw_early)(struct device *dev);
+	int (*poweroff_late)(struct device *dev);
+	int (*restore_early)(struct device *dev);
 	int (*suspend_noirq)(struct device *dev);
 	int (*resume_noirq)(struct device *dev);
 	int (*freeze_noirq)(struct device *dev);
@@ -305,7 +311,7 @@
 -----------------------
 When the system goes into the standby or memory sleep state, the phases are:
 
-		prepare, suspend, suspend_noirq.
+		prepare, suspend, suspend_late, suspend_noirq.
 
     1.	The prepare phase is meant to prevent races by preventing new devices
 	from being registered; the PM core would never know that all the
@@ -324,7 +330,12 @@
 	appropriate low-power state, depending on the bus type the device is on,
 	and they may enable wakeup events.
 
-    3.	The suspend_noirq phase occurs after IRQ handlers have been disabled,
+    3	For a number of devices it is convenient to split suspend into the
+	"quiesce device" and "save device state" phases, in which cases
+	suspend_late is meant to do the latter.  It is always executed after
+	runtime power management has been disabled for all devices.
+
+    4.	The suspend_noirq phase occurs after IRQ handlers have been disabled,
 	which means that the driver's interrupt handler will not be called while
 	the callback method is running.  The methods should save the values of
 	the device's registers that weren't saved previously and finally put the
@@ -359,7 +370,7 @@
 ----------------------
 When resuming from standby or memory sleep, the phases are:
 
-		resume_noirq, resume, complete.
+		resume_noirq, resume_early, resume, complete.
 
     1.	The resume_noirq callback methods should perform any actions needed
 	before the driver's interrupt handlers are invoked.  This generally
@@ -375,14 +386,18 @@
 	device driver's ->pm.resume_noirq() method to perform device-specific
 	actions.
 
-    2.	The resume methods should bring the the device back to its operating
+    2.	The resume_early methods should prepare devices for the execution of
+	the resume methods.  This generally involves undoing the actions of the
+	preceding suspend_late phase.
+
+    3	The resume methods should bring the the device back to its operating
 	state, so that it can perform normal I/O.  This generally involves
 	undoing the actions of the suspend phase.
 
-    3.	The complete phase uses only a bus callback.  The method should undo the
-	actions of the prepare phase.  Note, however, that new children may be
-	registered below the device as soon as the resume callbacks occur; it's
-	not necessary to wait until the complete phase.
+    4.	The complete phase should undo the actions of the prepare phase.  Note,
+	however, that new children may be registered below the device as soon as
+	the resume callbacks occur; it's not necessary to wait until the
+	complete phase.
 
 At the end of these phases, drivers should be as functional as they were before
 suspending: I/O can be performed using DMA and IRQs, and the relevant clocks are
@@ -429,8 +444,8 @@
 devices (thaw), write the image to permanent storage, and finally shut down the
 system (poweroff).  The phases used to accomplish this are:
 
-	prepare, freeze, freeze_noirq, thaw_noirq, thaw, complete,
-	prepare, poweroff, poweroff_noirq
+	prepare, freeze, freeze_late, freeze_noirq, thaw_noirq, thaw_early,
+	thaw, complete, prepare, poweroff, poweroff_late, poweroff_noirq
 
     1.	The prepare phase is discussed in the "Entering System Suspend" section
 	above.
@@ -441,7 +456,11 @@
 	save time it's best not to do so.  Also, the device should not be
 	prepared to generate wakeup events.
 
-    3.	The freeze_noirq phase is analogous to the suspend_noirq phase discussed
+    3.	The freeze_late phase is analogous to the suspend_late phase described
+	above, except that the device should not be put in a low-power state and
+	should not be allowed to generate wakeup events by it.
+
+    4.	The freeze_noirq phase is analogous to the suspend_noirq phase discussed
 	above, except again that the device should not be put in a low-power
 	state and should not be allowed to generate wakeup events.
 
@@ -449,15 +468,19 @@
 the contents of memory should remain undisturbed while this happens, so that the
 image forms an atomic snapshot of the system state.
 
-    4.	The thaw_noirq phase is analogous to the resume_noirq phase discussed
+    5.	The thaw_noirq phase is analogous to the resume_noirq phase discussed
 	above.  The main difference is that its methods can assume the device is
 	in the same state as at the end of the freeze_noirq phase.
 
-    5.	The thaw phase is analogous to the resume phase discussed above.  Its
+    6.	The thaw_early phase is analogous to the resume_early phase described
+	above.  Its methods should undo the actions of the preceding
+	freeze_late, if necessary.
+
+    7.	The thaw phase is analogous to the resume phase discussed above.  Its
 	methods should bring the device back to an operating state, so that it
 	can be used for saving the image if necessary.
 
-    6.	The complete phase is discussed in the "Leaving System Suspend" section
+    8.	The complete phase is discussed in the "Leaving System Suspend" section
 	above.
 
 At this point the system image is saved, and the devices then need to be
@@ -465,16 +488,19 @@
 before putting the system into the standby or memory sleep state, and the phases
 are similar.
 
-    7.	The prepare phase is discussed above.
+    9.	The prepare phase is discussed above.
 
-    8.	The poweroff phase is analogous to the suspend phase.
+    10.	The poweroff phase is analogous to the suspend phase.
 
-    9.	The poweroff_noirq phase is analogous to the suspend_noirq phase.
+    11.	The poweroff_late phase is analogous to the suspend_late phase.
 
-The poweroff and poweroff_noirq callbacks should do essentially the same things
-as the suspend and suspend_noirq callbacks.  The only notable difference is that
-they need not store the device register values, because the registers should
-already have been stored during the freeze or freeze_noirq phases.
+    12.	The poweroff_noirq phase is analogous to the suspend_noirq phase.
+
+The poweroff, poweroff_late and poweroff_noirq callbacks should do essentially
+the same things as the suspend, suspend_late and suspend_noirq callbacks,
+respectively.  The only notable difference is that they need not store the
+device register values, because the registers should already have been stored
+during the freeze, freeze_late or freeze_noirq phases.
 
 
 Leaving Hibernation
@@ -518,22 +544,25 @@
 functionality.  The operation is much like waking up from the memory sleep
 state, although it involves different phases:
 
-	restore_noirq, restore, complete
+	restore_noirq, restore_early, restore, complete
 
     1.	The restore_noirq phase is analogous to the resume_noirq phase.
 
-    2.	The restore phase is analogous to the resume phase.
+    2.	The restore_early phase is analogous to the resume_early phase.
 
-    3.	The complete phase is discussed above.
+    3.	The restore phase is analogous to the resume phase.
 
-The main difference from resume[_noirq] is that restore[_noirq] must assume the
-device has been accessed and reconfigured by the boot loader or the boot kernel.
-Consequently the state of the device may be different from the state remembered
-from the freeze and freeze_noirq phases.  The device may even need to be reset
-and completely re-initialized.  In many cases this difference doesn't matter, so
-the resume[_noirq] and restore[_norq] method pointers can be set to the same
-routines.  Nevertheless, different callback pointers are used in case there is a
-situation where it actually matters.
+    4.	The complete phase is discussed above.
+
+The main difference from resume[_early|_noirq] is that restore[_early|_noirq]
+must assume the device has been accessed and reconfigured by the boot loader or
+the boot kernel.  Consequently the state of the device may be different from the
+state remembered from the freeze, freeze_late and freeze_noirq phases.  The
+device may even need to be reset and completely re-initialized.  In many cases
+this difference doesn't matter, so the resume[_early|_noirq] and
+restore[_early|_norq] method pointers can be set to the same routines.
+Nevertheless, different callback pointers are used in case there is a situation
+where it actually does matter.
 
 
 Device Power Management Domains
diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt
index ebd7490..ec715cd 100644
--- a/Documentation/power/freezing-of-tasks.txt
+++ b/Documentation/power/freezing-of-tasks.txt
@@ -63,6 +63,27 @@
 order to clear the PF_FROZEN flag for each frozen task.  Then, the tasks that
 have been frozen leave __refrigerator() and continue running.
 
+
+Rationale behind the functions dealing with freezing and thawing of tasks:
+-------------------------------------------------------------------------
+
+freeze_processes():
+  - freezes only userspace tasks
+
+freeze_kernel_threads():
+  - freezes all tasks (including kernel threads) because we can't freeze
+    kernel threads without freezing userspace tasks
+
+thaw_kernel_threads():
+  - thaws only kernel threads; this is particularly useful if we need to do
+    anything special in between thawing of kernel threads and thawing of
+    userspace tasks, or if we want to postpone the thawing of userspace tasks
+
+thaw_processes():
+  - thaws all tasks (including kernel threads) because we can't thaw userspace
+    tasks without thawing kernel threads
+
+
 III. Which kernel threads are freezable?
 
 Kernel threads are not freezable by default.  However, a kernel thread may clear
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 5d602f68..dfad653 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -34,6 +34,7 @@
 	select ARM_CPU_SUSPEND if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
+	select PM_GENERIC_DOMAINS
 	help
 	  Enable EXYNOS4210 CPU support
 
@@ -74,11 +75,6 @@
 	help
 	  Common setup code for FIMD0.
 
-config EXYNOS4_DEV_PD
-	bool
-	help
-	  Compile in platform device definitions for Power Domain
-
 config EXYNOS4_DEV_SYSMMU
 	bool
 	help
@@ -195,7 +191,6 @@
 	select EXYNOS4_DEV_AHCI
 	select SAMSUNG_DEV_KEYPAD
 	select EXYNOS4_DEV_DMA
-	select EXYNOS4_DEV_PD
 	select SAMSUNG_DEV_PWM
 	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_DEV_SYSMMU
@@ -243,7 +238,6 @@
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
 	select EXYNOS4_DEV_DMA
-	select EXYNOS4_DEV_PD
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
@@ -277,7 +271,6 @@
 	select S5P_DEV_USB_EHCI
 	select S5P_SETUP_MIPIPHY
 	select EXYNOS4_DEV_DMA
-	select EXYNOS4_DEV_PD
 	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
@@ -310,7 +303,6 @@
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select EXYNOS4_DEV_DMA
-	select EXYNOS4_DEV_PD
 	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 5fc202c..d9191f9 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -17,6 +17,7 @@
 obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
 
 obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 obj-$(CONFIG_ARCH_EXYNOS4)	+= pmu.o
@@ -45,7 +46,6 @@
 
 obj-$(CONFIG_ARCH_EXYNOS4)		+= dev-audio.o
 obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
-obj-$(CONFIG_EXYNOS4_DEV_PD)		+= dev-pd.o
 obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)	+= dev-sysmmu.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
 obj-$(CONFIG_EXYNOS4_DEV_DMA)		+= dma.o
diff --git a/arch/arm/mach-exynos/dev-pd.c b/arch/arm/mach-exynos/dev-pd.c
deleted file mode 100644
index 3273f25..0000000
--- a/arch/arm/mach-exynos/dev-pd.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/* linux/arch/arm/mach-exynos4/dev-pd.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - Power Domain support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-
-#include <mach/regs-pmu.h>
-
-#include <plat/pd.h>
-
-static int exynos4_pd_enable(struct device *dev)
-{
-	struct samsung_pd_info *pdata =  dev->platform_data;
-	u32 timeout;
-
-	__raw_writel(S5P_INT_LOCAL_PWR_EN, pdata->base);
-
-	/* Wait max 1ms */
-	timeout = 10;
-	while ((__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN)
-		!= S5P_INT_LOCAL_PWR_EN) {
-		if (timeout == 0) {
-			printk(KERN_ERR "Power domain %s enable failed.\n",
-				dev_name(dev));
-			return -ETIMEDOUT;
-		}
-		timeout--;
-		udelay(100);
-	}
-
-	return 0;
-}
-
-static int exynos4_pd_disable(struct device *dev)
-{
-	struct samsung_pd_info *pdata =  dev->platform_data;
-	u32 timeout;
-
-	__raw_writel(0, pdata->base);
-
-	/* Wait max 1ms */
-	timeout = 10;
-	while (__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) {
-		if (timeout == 0) {
-			printk(KERN_ERR "Power domain %s disable failed.\n",
-				dev_name(dev));
-			return -ETIMEDOUT;
-		}
-		timeout--;
-		udelay(100);
-	}
-
-	return 0;
-}
-
-struct platform_device exynos4_device_pd[] = {
-	{
-		.name		= "samsung-pd",
-		.id		= 0,
-		.dev = {
-			.platform_data = &(struct samsung_pd_info) {
-				.enable		= exynos4_pd_enable,
-				.disable	= exynos4_pd_disable,
-				.base		= S5P_PMU_MFC_CONF,
-			},
-		},
-	}, {
-		.name		= "samsung-pd",
-		.id		= 1,
-		.dev = {
-			.platform_data = &(struct samsung_pd_info) {
-				.enable		= exynos4_pd_enable,
-				.disable	= exynos4_pd_disable,
-				.base		= S5P_PMU_G3D_CONF,
-			},
-		},
-	}, {
-		.name		= "samsung-pd",
-		.id		= 2,
-		.dev = {
-			.platform_data = &(struct samsung_pd_info) {
-				.enable		= exynos4_pd_enable,
-				.disable	= exynos4_pd_disable,
-				.base		= S5P_PMU_LCD0_CONF,
-			},
-		},
-	}, {
-		.name		= "samsung-pd",
-		.id		= 3,
-		.dev = {
-			.platform_data = &(struct samsung_pd_info) {
-				.enable		= exynos4_pd_enable,
-				.disable	= exynos4_pd_disable,
-				.base		= S5P_PMU_LCD1_CONF,
-			},
-		},
-	}, {
-		.name		= "samsung-pd",
-		.id		= 4,
-		.dev = {
-			.platform_data = &(struct samsung_pd_info) {
-				.enable		= exynos4_pd_enable,
-				.disable	= exynos4_pd_disable,
-				.base		= S5P_PMU_TV_CONF,
-			},
-		},
-	}, {
-		.name		= "samsung-pd",
-		.id		= 5,
-		.dev = {
-			.platform_data = &(struct samsung_pd_info) {
-				.enable		= exynos4_pd_enable,
-				.disable	= exynos4_pd_disable,
-				.base		= S5P_PMU_CAM_CONF,
-			},
-		},
-	}, {
-		.name		= "samsung-pd",
-		.id		= 6,
-		.dev = {
-			.platform_data = &(struct samsung_pd_info) {
-				.enable		= exynos4_pd_enable,
-				.disable	= exynos4_pd_disable,
-				.base		= S5P_PMU_GPS_CONF,
-			},
-		},
-	},
-};
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 435261f..aa37179 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -1263,9 +1263,6 @@
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
-	&exynos4_device_pd[PD_MFC],
-	&exynos4_device_pd[PD_LCD0],
-	&exynos4_device_pd[PD_CAM],
 	&s5p_device_fimc_md,
 
 	/* NURI Devices */
@@ -1315,14 +1312,6 @@
 
 	/* Last */
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
-	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
-	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
-
-	s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
-	s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
-	s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
-	s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
-	s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
 }
 
 MACHINE_START(NURI, "NURI")
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 0679b8a..fa5c4a5 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -621,13 +621,6 @@
 	&s5p_device_mfc_r,
 	&s5p_device_mixer,
 	&exynos4_device_ohci,
-	&exynos4_device_pd[PD_LCD0],
-	&exynos4_device_pd[PD_TV],
-	&exynos4_device_pd[PD_G3D],
-	&exynos4_device_pd[PD_LCD1],
-	&exynos4_device_pd[PD_CAM],
-	&exynos4_device_pd[PD_GPS],
-	&exynos4_device_pd[PD_MFC],
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
 };
@@ -695,13 +688,6 @@
 
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
 
-	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
-
-	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
-	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
-
-	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
-
 	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
 }
 
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index b2c5557..5258b85 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -277,13 +277,6 @@
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
-	&exynos4_device_pd[PD_MFC],
-	&exynos4_device_pd[PD_G3D],
-	&exynos4_device_pd[PD_LCD0],
-	&exynos4_device_pd[PD_LCD1],
-	&exynos4_device_pd[PD_CAM],
-	&exynos4_device_pd[PD_TV],
-	&exynos4_device_pd[PD_GPS],
 	&exynos4_device_spdif,
 	&exynos4_device_sysmmu,
 	&samsung_asoc_dma,
@@ -336,10 +329,6 @@
 	WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
 	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
 	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-
-	/* setup dependencies between TV devices */
-	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
-	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
 }
 
 static void __init smdkv310_map_io(void)
@@ -379,7 +368,6 @@
 	clk_xusbxti.rate = 24000000;
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
-	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
 }
 
 MACHINE_START(SMDKV310, "SMDKV310")
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 3893995..b2d495b 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -971,7 +971,6 @@
 	&s3c_device_i2c5,
 	&s5p_device_i2c_hdmiphy,
 	&hdmi_fixed_voltage,
-	&exynos4_device_pd[PD_TV],
 	&s5p_device_hdmi,
 	&s5p_device_sdo,
 	&s5p_device_mixer,
@@ -984,9 +983,6 @@
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
-	&exynos4_device_pd[PD_MFC],
-	&exynos4_device_pd[PD_LCD0],
-	&exynos4_device_pd[PD_CAM],
 	&cam_i_core_fixed_reg_dev,
 	&cam_s_if_fixed_reg_dev,
 	&s5p_device_fimc_md,
@@ -1005,10 +1001,6 @@
 	gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
 	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
 	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-
-	/* setup dependencies between TV devices */
-	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
-	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
 }
 
 static void __init universal_reserve(void)
@@ -1042,15 +1034,6 @@
 
 	/* Last */
 	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
-
-	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
-	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
-
-	s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
-	s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
-	s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
-	s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
-	s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
 }
 
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
new file mode 100644
index 0000000..0b04af2
--- /dev/null
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -0,0 +1,195 @@
+/*
+ * Exynos Generic power domain support.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Implementation of Exynos specific power domain control which is used in
+ * conjunction with runtime-pm. Support for both device-tree and non-device-tree
+ * based power domain support is included.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/pm_domain.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+
+#include <mach/regs-pmu.h>
+#include <plat/devs.h>
+
+/*
+ * Exynos specific wrapper around the generic power domain
+ */
+struct exynos_pm_domain {
+	void __iomem *base;
+	char const *name;
+	bool is_off;
+	struct generic_pm_domain pd;
+};
+
+static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
+{
+	struct exynos_pm_domain *pd;
+	void __iomem *base;
+	u32 timeout, pwr;
+	char *op;
+
+	pd = container_of(domain, struct exynos_pm_domain, pd);
+	base = pd->base;
+
+	pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0;
+	__raw_writel(pwr, base);
+
+	/* Wait max 1ms */
+	timeout = 10;
+
+	while ((__raw_readl(base + 0x4) & S5P_INT_LOCAL_PWR_EN)	!= pwr) {
+		if (!timeout) {
+			op = (power_on) ? "enable" : "disable";
+			pr_err("Power domain %s %s failed\n", domain->name, op);
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		cpu_relax();
+		usleep_range(80, 100);
+	}
+	return 0;
+}
+
+static int exynos_pd_power_on(struct generic_pm_domain *domain)
+{
+	return exynos_pd_power(domain, true);
+}
+
+static int exynos_pd_power_off(struct generic_pm_domain *domain)
+{
+	return exynos_pd_power(domain, false);
+}
+
+#define EXYNOS_GPD(PD, BASE, NAME)			\
+static struct exynos_pm_domain PD = {			\
+	.base = (void __iomem *)BASE,			\
+	.name = NAME,					\
+	.pd = {						\
+		.power_off = exynos_pd_power_off,	\
+		.power_on = exynos_pd_power_on,	\
+	},						\
+}
+
+#ifdef CONFIG_OF
+static __init int exynos_pm_dt_parse_domains(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
+		struct exynos_pm_domain *pd;
+
+		pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+		if (!pd) {
+			pr_err("%s: failed to allocate memory for domain\n",
+					__func__);
+			return -ENOMEM;
+		}
+
+		if (of_get_property(np, "samsung,exynos4210-pd-off", NULL))
+			pd->is_off = true;
+		pd->name = np->name;
+		pd->base = of_iomap(np, 0);
+		pd->pd.power_off = exynos_pd_power_off;
+		pd->pd.power_on = exynos_pd_power_on;
+		pd->pd.of_node = np;
+		pm_genpd_init(&pd->pd, NULL, false);
+	}
+	return 0;
+}
+#else
+static __init int exynos_pm_dt_parse_domains(void)
+{
+	return 0;
+}
+#endif /* CONFIG_OF */
+
+static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
+						struct exynos_pm_domain *pd)
+{
+	if (pdev->dev.bus) {
+		if (pm_genpd_add_device(&pd->pd, &pdev->dev))
+			pr_info("%s: error in adding %s device to %s power"
+				"domain\n", __func__, dev_name(&pdev->dev),
+				pd->name);
+	}
+}
+
+EXYNOS_GPD(exynos4_pd_mfc, S5P_PMU_MFC_CONF, "pd-mfc");
+EXYNOS_GPD(exynos4_pd_g3d, S5P_PMU_G3D_CONF, "pd-g3d");
+EXYNOS_GPD(exynos4_pd_lcd0, S5P_PMU_LCD0_CONF, "pd-lcd0");
+EXYNOS_GPD(exynos4_pd_lcd1, S5P_PMU_LCD1_CONF, "pd-lcd1");
+EXYNOS_GPD(exynos4_pd_tv, S5P_PMU_TV_CONF, "pd-tv");
+EXYNOS_GPD(exynos4_pd_cam, S5P_PMU_CAM_CONF, "pd-cam");
+EXYNOS_GPD(exynos4_pd_gps, S5P_PMU_GPS_CONF, "pd-gps");
+
+static struct exynos_pm_domain *exynos4_pm_domains[] = {
+	&exynos4_pd_mfc,
+	&exynos4_pd_g3d,
+	&exynos4_pd_lcd0,
+	&exynos4_pd_lcd1,
+	&exynos4_pd_tv,
+	&exynos4_pd_cam,
+	&exynos4_pd_gps,
+};
+
+static __init int exynos4_pm_init_power_domain(void)
+{
+	int idx;
+
+	if (of_have_populated_dt())
+		return exynos_pm_dt_parse_domains();
+
+	for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++)
+		pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL,
+				exynos4_pm_domains[idx]->is_off);
+
+#ifdef CONFIG_S5P_DEV_FIMD0
+	exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0);
+#endif
+#ifdef CONFIG_S5P_DEV_TV
+	exynos_pm_add_dev_to_genpd(&s5p_device_hdmi, &exynos4_pd_tv);
+	exynos_pm_add_dev_to_genpd(&s5p_device_mixer, &exynos4_pd_tv);
+#endif
+#ifdef CONFIG_S5P_DEV_MFC
+	exynos_pm_add_dev_to_genpd(&s5p_device_mfc, &exynos4_pd_mfc);
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC0
+	exynos_pm_add_dev_to_genpd(&s5p_device_fimc0, &exynos4_pd_cam);
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC1
+	exynos_pm_add_dev_to_genpd(&s5p_device_fimc1, &exynos4_pd_cam);
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC2
+	exynos_pm_add_dev_to_genpd(&s5p_device_fimc2, &exynos4_pd_cam);
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC3
+	exynos_pm_add_dev_to_genpd(&s5p_device_fimc3, &exynos4_pd_cam);
+#endif
+#ifdef CONFIG_S5P_DEV_CSIS0
+	exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis0, &exynos4_pd_cam);
+#endif
+#ifdef CONFIG_S5P_DEV_CSIS1
+	exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis1, &exynos4_pd_cam);
+#endif
+	return 0;
+}
+arch_initcall(exynos4_pm_init_power_domain);
+
+static __init int exynos_pm_late_initcall(void)
+{
+	pm_genpd_poweroff_unused();
+	return 0;
+}
+late_initcall(exynos_pm_late_initcall);
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index a83cf51..cccf91b 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -1043,6 +1043,8 @@
 	sh7372_add_device_to_domain(&sh7372_a4r, &veu2_device);
 	sh7372_add_device_to_domain(&sh7372_a4r, &veu3_device);
 	sh7372_add_device_to_domain(&sh7372_a4r, &jpu_device);
+	sh7372_add_device_to_domain(&sh7372_a4r, &tmu00_device);
+	sh7372_add_device_to_domain(&sh7372_a4r, &tmu01_device);
 }
 
 void __init sh7372_add_early_devices(void)
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index f76623c..5d56931 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -1234,8 +1234,7 @@
 	struct apm_user	*as;
 
 	dpm_suspend_start(PMSG_SUSPEND);
-
-	dpm_suspend_noirq(PMSG_SUSPEND);
+	dpm_suspend_end(PMSG_SUSPEND);
 
 	local_irq_disable();
 	syscore_suspend();
@@ -1259,9 +1258,9 @@
 	syscore_resume();
 	local_irq_enable();
 
-	dpm_resume_noirq(PMSG_RESUME);
-
+	dpm_resume_start(PMSG_RESUME);
 	dpm_resume_end(PMSG_RESUME);
+
 	queue_event(APM_NORMAL_RESUME, NULL);
 	spin_lock(&user_list_lock);
 	for (as = user_list; as != NULL; as = as->next) {
@@ -1277,7 +1276,7 @@
 {
 	int err;
 
-	dpm_suspend_noirq(PMSG_SUSPEND);
+	dpm_suspend_end(PMSG_SUSPEND);
 
 	local_irq_disable();
 	syscore_suspend();
@@ -1291,7 +1290,7 @@
 	syscore_resume();
 	local_irq_enable();
 
-	dpm_resume_noirq(PMSG_RESUME);
+	dpm_resume_start(PMSG_RESUME);
 }
 
 static apm_event_t get_event(void)
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 978bbf7..73ce9fb 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -366,7 +366,7 @@
 	not_suspended = 0;
 	list_for_each_entry(pdd, &genpd->dev_list, list_node)
 		if (pdd->dev->driver && (!pm_runtime_suspended(pdd->dev)
-		    || pdd->dev->power.irq_safe))
+		    || pdd->dev->power.irq_safe || to_gpd_data(pdd)->always_on))
 			not_suspended++;
 
 	if (not_suspended > genpd->in_progress)
@@ -503,6 +503,9 @@
 
 	might_sleep_if(!genpd->dev_irq_safe);
 
+	if (dev_gpd_data(dev)->always_on)
+		return -EBUSY;
+
 	stop_ok = genpd->gov ? genpd->gov->stop_ok : NULL;
 	if (stop_ok && !stop_ok(dev))
 		return -EBUSY;
@@ -764,8 +767,10 @@
 
 	genpd_acquire_lock(genpd);
 
-	if (genpd->prepared_count++ == 0)
+	if (genpd->prepared_count++ == 0) {
+		genpd->suspended_count = 0;
 		genpd->suspend_power_off = genpd->status == GPD_STATE_POWER_OFF;
+	}
 
 	genpd_release_lock(genpd);
 
@@ -820,17 +825,16 @@
 }
 
 /**
- * pm_genpd_suspend_noirq - Late suspend of a device from an I/O PM domain.
+ * pm_genpd_suspend_late - Late suspend of a device from an I/O PM domain.
  * @dev: Device to suspend.
  *
  * Carry out a late suspend of a device under the assumption that its
  * pm_domain field points to the domain member of an object of type
  * struct generic_pm_domain representing a PM domain consisting of I/O devices.
  */
-static int pm_genpd_suspend_noirq(struct device *dev)
+static int pm_genpd_suspend_late(struct device *dev)
 {
 	struct generic_pm_domain *genpd;
-	int ret;
 
 	dev_dbg(dev, "%s()\n", __func__);
 
@@ -838,14 +842,28 @@
 	if (IS_ERR(genpd))
 		return -EINVAL;
 
-	if (genpd->suspend_power_off)
-		return 0;
+	return genpd->suspend_power_off ? 0 : genpd_suspend_late(genpd, dev);
+}
 
-	ret = genpd_suspend_late(genpd, dev);
-	if (ret)
-		return ret;
+/**
+ * pm_genpd_suspend_noirq - Completion of suspend of device in an I/O PM domain.
+ * @dev: Device to suspend.
+ *
+ * Stop the device and remove power from the domain if all devices in it have
+ * been stopped.
+ */
+static int pm_genpd_suspend_noirq(struct device *dev)
+{
+	struct generic_pm_domain *genpd;
 
-	if (dev->power.wakeup_path && genpd_dev_active_wakeup(genpd, dev))
+	dev_dbg(dev, "%s()\n", __func__);
+
+	genpd = dev_to_genpd(dev);
+	if (IS_ERR(genpd))
+		return -EINVAL;
+
+	if (genpd->suspend_power_off || dev_gpd_data(dev)->always_on
+	    || (dev->power.wakeup_path && genpd_dev_active_wakeup(genpd, dev)))
 		return 0;
 
 	genpd_stop_dev(genpd, dev);
@@ -862,13 +880,10 @@
 }
 
 /**
- * pm_genpd_resume_noirq - Early resume of a device from an I/O power domain.
+ * pm_genpd_resume_noirq - Start of resume of device in an I/O PM domain.
  * @dev: Device to resume.
  *
- * Carry out an early resume of a device under the assumption that its
- * pm_domain field points to the domain member of an object of type
- * struct generic_pm_domain representing a power domain consisting of I/O
- * devices.
+ * Restore power to the device's PM domain, if necessary, and start the device.
  */
 static int pm_genpd_resume_noirq(struct device *dev)
 {
@@ -880,7 +895,8 @@
 	if (IS_ERR(genpd))
 		return -EINVAL;
 
-	if (genpd->suspend_power_off)
+	if (genpd->suspend_power_off || dev_gpd_data(dev)->always_on
+	    || (dev->power.wakeup_path && genpd_dev_active_wakeup(genpd, dev)))
 		return 0;
 
 	/*
@@ -890,13 +906,34 @@
 	 */
 	pm_genpd_poweron(genpd);
 	genpd->suspended_count--;
-	genpd_start_dev(genpd, dev);
 
-	return genpd_resume_early(genpd, dev);
+	return genpd_start_dev(genpd, dev);
 }
 
 /**
- * pm_genpd_resume - Resume a device belonging to an I/O power domain.
+ * pm_genpd_resume_early - Early resume of a device in an I/O PM domain.
+ * @dev: Device to resume.
+ *
+ * Carry out an early resume of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a power domain consisting of I/O
+ * devices.
+ */
+static int pm_genpd_resume_early(struct device *dev)
+{
+	struct generic_pm_domain *genpd;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	genpd = dev_to_genpd(dev);
+	if (IS_ERR(genpd))
+		return -EINVAL;
+
+	return genpd->suspend_power_off ? 0 : genpd_resume_early(genpd, dev);
+}
+
+/**
+ * pm_genpd_resume - Resume of device in an I/O PM domain.
  * @dev: Device to resume.
  *
  * Resume a device under the assumption that its pm_domain field points to the
@@ -917,7 +954,7 @@
 }
 
 /**
- * pm_genpd_freeze - Freeze a device belonging to an I/O power domain.
+ * pm_genpd_freeze - Freezing a device in an I/O PM domain.
  * @dev: Device to freeze.
  *
  * Freeze a device under the assumption that its pm_domain field points to the
@@ -938,7 +975,29 @@
 }
 
 /**
- * pm_genpd_freeze_noirq - Late freeze of a device from an I/O power domain.
+ * pm_genpd_freeze_late - Late freeze of a device in an I/O PM domain.
+ * @dev: Device to freeze.
+ *
+ * Carry out a late freeze of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a power domain consisting of I/O
+ * devices.
+ */
+static int pm_genpd_freeze_late(struct device *dev)
+{
+	struct generic_pm_domain *genpd;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	genpd = dev_to_genpd(dev);
+	if (IS_ERR(genpd))
+		return -EINVAL;
+
+	return genpd->suspend_power_off ? 0 : genpd_freeze_late(genpd, dev);
+}
+
+/**
+ * pm_genpd_freeze_noirq - Completion of freezing a device in an I/O PM domain.
  * @dev: Device to freeze.
  *
  * Carry out a late freeze of a device under the assumption that its
@@ -949,7 +1008,6 @@
 static int pm_genpd_freeze_noirq(struct device *dev)
 {
 	struct generic_pm_domain *genpd;
-	int ret;
 
 	dev_dbg(dev, "%s()\n", __func__);
 
@@ -957,26 +1015,16 @@
 	if (IS_ERR(genpd))
 		return -EINVAL;
 
-	if (genpd->suspend_power_off)
-		return 0;
-
-	ret = genpd_freeze_late(genpd, dev);
-	if (ret)
-		return ret;
-
-	genpd_stop_dev(genpd, dev);
-
-	return 0;
+	return genpd->suspend_power_off || dev_gpd_data(dev)->always_on ?
+		0 : genpd_stop_dev(genpd, dev);
 }
 
 /**
- * pm_genpd_thaw_noirq - Early thaw of a device from an I/O power domain.
+ * pm_genpd_thaw_noirq - Early thaw of device in an I/O PM domain.
  * @dev: Device to thaw.
  *
- * Carry out an early thaw of a device under the assumption that its
- * pm_domain field points to the domain member of an object of type
- * struct generic_pm_domain representing a power domain consisting of I/O
- * devices.
+ * Start the device, unless power has been removed from the domain already
+ * before the system transition.
  */
 static int pm_genpd_thaw_noirq(struct device *dev)
 {
@@ -988,12 +1036,30 @@
 	if (IS_ERR(genpd))
 		return -EINVAL;
 
-	if (genpd->suspend_power_off)
-		return 0;
+	return genpd->suspend_power_off || dev_gpd_data(dev)->always_on ?
+		0 : genpd_start_dev(genpd, dev);
+}
 
-	genpd_start_dev(genpd, dev);
+/**
+ * pm_genpd_thaw_early - Early thaw of device in an I/O PM domain.
+ * @dev: Device to thaw.
+ *
+ * Carry out an early thaw of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a power domain consisting of I/O
+ * devices.
+ */
+static int pm_genpd_thaw_early(struct device *dev)
+{
+	struct generic_pm_domain *genpd;
 
-	return genpd_thaw_early(genpd, dev);
+	dev_dbg(dev, "%s()\n", __func__);
+
+	genpd = dev_to_genpd(dev);
+	if (IS_ERR(genpd))
+		return -EINVAL;
+
+	return genpd->suspend_power_off ? 0 : genpd_thaw_early(genpd, dev);
 }
 
 /**
@@ -1018,13 +1084,11 @@
 }
 
 /**
- * pm_genpd_restore_noirq - Early restore of a device from an I/O power domain.
+ * pm_genpd_restore_noirq - Start of restore of device in an I/O PM domain.
  * @dev: Device to resume.
  *
- * Carry out an early restore of a device under the assumption that its
- * pm_domain field points to the domain member of an object of type
- * struct generic_pm_domain representing a power domain consisting of I/O
- * devices.
+ * Make sure the domain will be in the same power state as before the
+ * hibernation the system is resuming from and start the device if necessary.
  */
 static int pm_genpd_restore_noirq(struct device *dev)
 {
@@ -1040,23 +1104,35 @@
 	 * Since all of the "noirq" callbacks are executed sequentially, it is
 	 * guaranteed that this function will never run twice in parallel for
 	 * the same PM domain, so it is not necessary to use locking here.
+	 *
+	 * At this point suspended_count == 0 means we are being run for the
+	 * first time for the given domain in the present cycle.
 	 */
-	genpd->status = GPD_STATE_POWER_OFF;
-	if (genpd->suspend_power_off) {
+	if (genpd->suspended_count++ == 0) {
 		/*
-		 * The boot kernel might put the domain into the power on state,
-		 * so make sure it really is powered off.
+		 * The boot kernel might put the domain into arbitrary state,
+		 * so make it appear as powered off to pm_genpd_poweron(), so
+		 * that it tries to power it on in case it was really off.
 		 */
-		if (genpd->power_off)
-			genpd->power_off(genpd);
-		return 0;
+		genpd->status = GPD_STATE_POWER_OFF;
+		if (genpd->suspend_power_off) {
+			/*
+			 * If the domain was off before the hibernation, make
+			 * sure it will be off going forward.
+			 */
+			if (genpd->power_off)
+				genpd->power_off(genpd);
+
+			return 0;
+		}
 	}
 
-	pm_genpd_poweron(genpd);
-	genpd->suspended_count--;
-	genpd_start_dev(genpd, dev);
+	if (genpd->suspend_power_off)
+		return 0;
 
-	return genpd_resume_early(genpd, dev);
+	pm_genpd_poweron(genpd);
+
+	return dev_gpd_data(dev)->always_on ? 0 : genpd_start_dev(genpd, dev);
 }
 
 /**
@@ -1099,11 +1175,15 @@
 
 #define pm_genpd_prepare		NULL
 #define pm_genpd_suspend		NULL
+#define pm_genpd_suspend_late		NULL
 #define pm_genpd_suspend_noirq		NULL
+#define pm_genpd_resume_early		NULL
 #define pm_genpd_resume_noirq		NULL
 #define pm_genpd_resume			NULL
 #define pm_genpd_freeze			NULL
+#define pm_genpd_freeze_late		NULL
 #define pm_genpd_freeze_noirq		NULL
+#define pm_genpd_thaw_early		NULL
 #define pm_genpd_thaw_noirq		NULL
 #define pm_genpd_thaw			NULL
 #define pm_genpd_restore_noirq		NULL
@@ -1171,6 +1251,38 @@
 }
 
 /**
+ * __pm_genpd_of_add_device - Add a device to an I/O PM domain.
+ * @genpd_node: Device tree node pointer representing a PM domain to which the
+ *   the device is added to.
+ * @dev: Device to be added.
+ * @td: Set of PM QoS timing parameters to attach to the device.
+ */
+int __pm_genpd_of_add_device(struct device_node *genpd_node, struct device *dev,
+			     struct gpd_timing_data *td)
+{
+	struct generic_pm_domain *genpd = NULL, *gpd;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	if (IS_ERR_OR_NULL(genpd_node) || IS_ERR_OR_NULL(dev))
+		return -EINVAL;
+
+	mutex_lock(&gpd_list_lock);
+	list_for_each_entry(gpd, &gpd_list, gpd_list_node) {
+		if (gpd->of_node == genpd_node) {
+			genpd = gpd;
+			break;
+		}
+	}
+	mutex_unlock(&gpd_list_lock);
+
+	if (!genpd)
+		return -EINVAL;
+
+	return __pm_genpd_add_device(genpd, dev, td);
+}
+
+/**
  * pm_genpd_remove_device - Remove a device from an I/O PM domain.
  * @genpd: PM domain to remove the device from.
  * @dev: Device to be removed.
@@ -1216,6 +1328,26 @@
 }
 
 /**
+ * pm_genpd_dev_always_on - Set/unset the "always on" flag for a given device.
+ * @dev: Device to set/unset the flag for.
+ * @val: The new value of the device's "always on" flag.
+ */
+void pm_genpd_dev_always_on(struct device *dev, bool val)
+{
+	struct pm_subsys_data *psd;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->power.lock, flags);
+
+	psd = dev_to_psd(dev);
+	if (psd && psd->domain_data)
+		to_gpd_data(psd->domain_data)->always_on = val;
+
+	spin_unlock_irqrestore(&dev->power.lock, flags);
+}
+EXPORT_SYMBOL_GPL(pm_genpd_dev_always_on);
+
+/**
  * pm_genpd_add_subdomain - Add a subdomain to an I/O PM domain.
  * @genpd: Master PM domain to add the subdomain to.
  * @subdomain: Subdomain to be added.
@@ -1450,7 +1582,7 @@
 {
 	int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.suspend_late;
 
-	return cb ? cb(dev) : pm_generic_suspend_noirq(dev);
+	return cb ? cb(dev) : pm_generic_suspend_late(dev);
 }
 
 /**
@@ -1461,7 +1593,7 @@
 {
 	int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.resume_early;
 
-	return cb ? cb(dev) : pm_generic_resume_noirq(dev);
+	return cb ? cb(dev) : pm_generic_resume_early(dev);
 }
 
 /**
@@ -1494,7 +1626,7 @@
 {
 	int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.freeze_late;
 
-	return cb ? cb(dev) : pm_generic_freeze_noirq(dev);
+	return cb ? cb(dev) : pm_generic_freeze_late(dev);
 }
 
 /**
@@ -1505,7 +1637,7 @@
 {
 	int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.thaw_early;
 
-	return cb ? cb(dev) : pm_generic_thaw_noirq(dev);
+	return cb ? cb(dev) : pm_generic_thaw_early(dev);
 }
 
 /**
@@ -1557,23 +1689,28 @@
 	genpd->poweroff_task = NULL;
 	genpd->resume_count = 0;
 	genpd->device_count = 0;
-	genpd->suspended_count = 0;
 	genpd->max_off_time_ns = -1;
 	genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend;
 	genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume;
 	genpd->domain.ops.runtime_idle = pm_generic_runtime_idle;
 	genpd->domain.ops.prepare = pm_genpd_prepare;
 	genpd->domain.ops.suspend = pm_genpd_suspend;
+	genpd->domain.ops.suspend_late = pm_genpd_suspend_late;
 	genpd->domain.ops.suspend_noirq = pm_genpd_suspend_noirq;
 	genpd->domain.ops.resume_noirq = pm_genpd_resume_noirq;
+	genpd->domain.ops.resume_early = pm_genpd_resume_early;
 	genpd->domain.ops.resume = pm_genpd_resume;
 	genpd->domain.ops.freeze = pm_genpd_freeze;
+	genpd->domain.ops.freeze_late = pm_genpd_freeze_late;
 	genpd->domain.ops.freeze_noirq = pm_genpd_freeze_noirq;
 	genpd->domain.ops.thaw_noirq = pm_genpd_thaw_noirq;
+	genpd->domain.ops.thaw_early = pm_genpd_thaw_early;
 	genpd->domain.ops.thaw = pm_genpd_thaw;
 	genpd->domain.ops.poweroff = pm_genpd_suspend;
+	genpd->domain.ops.poweroff_late = pm_genpd_suspend_late;
 	genpd->domain.ops.poweroff_noirq = pm_genpd_suspend_noirq;
 	genpd->domain.ops.restore_noirq = pm_genpd_restore_noirq;
+	genpd->domain.ops.restore_early = pm_genpd_resume_early;
 	genpd->domain.ops.restore = pm_genpd_resume;
 	genpd->domain.ops.complete = pm_genpd_complete;
 	genpd->dev_ops.save_state = pm_genpd_default_save_state;
diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c
index 10bdd79..d03d290 100644
--- a/drivers/base/power/generic_ops.c
+++ b/drivers/base/power/generic_ops.c
@@ -92,67 +92,38 @@
 }
 
 /**
- * __pm_generic_call - Generic suspend/freeze/poweroff/thaw subsystem callback.
- * @dev: Device to handle.
- * @event: PM transition of the system under way.
- * @bool: Whether or not this is the "noirq" stage.
- *
- * Execute the PM callback corresponding to @event provided by the driver of
- * @dev, if defined, and return its error code.    Return 0 if the callback is
- * not present.
- */
-static int __pm_generic_call(struct device *dev, int event, bool noirq)
-{
-	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
-	int (*callback)(struct device *);
-
-	if (!pm)
-		return 0;
-
-	switch (event) {
-	case PM_EVENT_SUSPEND:
-		callback = noirq ? pm->suspend_noirq : pm->suspend;
-		break;
-	case PM_EVENT_FREEZE:
-		callback = noirq ? pm->freeze_noirq : pm->freeze;
-		break;
-	case PM_EVENT_HIBERNATE:
-		callback = noirq ? pm->poweroff_noirq : pm->poweroff;
-		break;
-	case PM_EVENT_RESUME:
-		callback = noirq ? pm->resume_noirq : pm->resume;
-		break;
-	case PM_EVENT_THAW:
-		callback = noirq ? pm->thaw_noirq : pm->thaw;
-		break;
-	case PM_EVENT_RESTORE:
-		callback = noirq ? pm->restore_noirq : pm->restore;
-		break;
-	default:
-		callback = NULL;
-		break;
-	}
-
-	return callback ? callback(dev) : 0;
-}
-
-/**
  * pm_generic_suspend_noirq - Generic suspend_noirq callback for subsystems.
  * @dev: Device to suspend.
  */
 int pm_generic_suspend_noirq(struct device *dev)
 {
-	return __pm_generic_call(dev, PM_EVENT_SUSPEND, true);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->suspend_noirq ? pm->suspend_noirq(dev) : 0;
 }
 EXPORT_SYMBOL_GPL(pm_generic_suspend_noirq);
 
 /**
+ * pm_generic_suspend_late - Generic suspend_late callback for subsystems.
+ * @dev: Device to suspend.
+ */
+int pm_generic_suspend_late(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->suspend_late ? pm->suspend_late(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_suspend_late);
+
+/**
  * pm_generic_suspend - Generic suspend callback for subsystems.
  * @dev: Device to suspend.
  */
 int pm_generic_suspend(struct device *dev)
 {
-	return __pm_generic_call(dev, PM_EVENT_SUSPEND, false);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->suspend ? pm->suspend(dev) : 0;
 }
 EXPORT_SYMBOL_GPL(pm_generic_suspend);
 
@@ -162,17 +133,33 @@
  */
 int pm_generic_freeze_noirq(struct device *dev)
 {
-	return __pm_generic_call(dev, PM_EVENT_FREEZE, true);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->freeze_noirq ? pm->freeze_noirq(dev) : 0;
 }
 EXPORT_SYMBOL_GPL(pm_generic_freeze_noirq);
 
 /**
+ * pm_generic_freeze_late - Generic freeze_late callback for subsystems.
+ * @dev: Device to freeze.
+ */
+int pm_generic_freeze_late(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->freeze_late ? pm->freeze_late(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_freeze_late);
+
+/**
  * pm_generic_freeze - Generic freeze callback for subsystems.
  * @dev: Device to freeze.
  */
 int pm_generic_freeze(struct device *dev)
 {
-	return __pm_generic_call(dev, PM_EVENT_FREEZE, false);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->freeze ? pm->freeze(dev) : 0;
 }
 EXPORT_SYMBOL_GPL(pm_generic_freeze);
 
@@ -182,17 +169,33 @@
  */
 int pm_generic_poweroff_noirq(struct device *dev)
 {
-	return __pm_generic_call(dev, PM_EVENT_HIBERNATE, true);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->poweroff_noirq ? pm->poweroff_noirq(dev) : 0;
 }
 EXPORT_SYMBOL_GPL(pm_generic_poweroff_noirq);
 
 /**
+ * pm_generic_poweroff_late - Generic poweroff_late callback for subsystems.
+ * @dev: Device to handle.
+ */
+int pm_generic_poweroff_late(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->poweroff_late ? pm->poweroff_late(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_poweroff_late);
+
+/**
  * pm_generic_poweroff - Generic poweroff callback for subsystems.
  * @dev: Device to handle.
  */
 int pm_generic_poweroff(struct device *dev)
 {
-	return __pm_generic_call(dev, PM_EVENT_HIBERNATE, false);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->poweroff ? pm->poweroff(dev) : 0;
 }
 EXPORT_SYMBOL_GPL(pm_generic_poweroff);
 
@@ -202,17 +205,33 @@
  */
 int pm_generic_thaw_noirq(struct device *dev)
 {
-	return __pm_generic_call(dev, PM_EVENT_THAW, true);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->thaw_noirq ? pm->thaw_noirq(dev) : 0;
 }
 EXPORT_SYMBOL_GPL(pm_generic_thaw_noirq);
 
 /**
+ * pm_generic_thaw_early - Generic thaw_early callback for subsystems.
+ * @dev: Device to thaw.
+ */
+int pm_generic_thaw_early(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->thaw_early ? pm->thaw_early(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_thaw_early);
+
+/**
  * pm_generic_thaw - Generic thaw callback for subsystems.
  * @dev: Device to thaw.
  */
 int pm_generic_thaw(struct device *dev)
 {
-	return __pm_generic_call(dev, PM_EVENT_THAW, false);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->thaw ? pm->thaw(dev) : 0;
 }
 EXPORT_SYMBOL_GPL(pm_generic_thaw);
 
@@ -222,17 +241,33 @@
  */
 int pm_generic_resume_noirq(struct device *dev)
 {
-	return __pm_generic_call(dev, PM_EVENT_RESUME, true);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->resume_noirq ? pm->resume_noirq(dev) : 0;
 }
 EXPORT_SYMBOL_GPL(pm_generic_resume_noirq);
 
 /**
+ * pm_generic_resume_early - Generic resume_early callback for subsystems.
+ * @dev: Device to resume.
+ */
+int pm_generic_resume_early(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->resume_early ? pm->resume_early(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_resume_early);
+
+/**
  * pm_generic_resume - Generic resume callback for subsystems.
  * @dev: Device to resume.
  */
 int pm_generic_resume(struct device *dev)
 {
-	return __pm_generic_call(dev, PM_EVENT_RESUME, false);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->resume ? pm->resume(dev) : 0;
 }
 EXPORT_SYMBOL_GPL(pm_generic_resume);
 
@@ -242,17 +277,33 @@
  */
 int pm_generic_restore_noirq(struct device *dev)
 {
-	return __pm_generic_call(dev, PM_EVENT_RESTORE, true);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->restore_noirq ? pm->restore_noirq(dev) : 0;
 }
 EXPORT_SYMBOL_GPL(pm_generic_restore_noirq);
 
 /**
+ * pm_generic_restore_early - Generic restore_early callback for subsystems.
+ * @dev: Device to resume.
+ */
+int pm_generic_restore_early(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->restore_early ? pm->restore_early(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_restore_early);
+
+/**
  * pm_generic_restore - Generic restore callback for subsystems.
  * @dev: Device to restore.
  */
 int pm_generic_restore(struct device *dev)
 {
-	return __pm_generic_call(dev, PM_EVENT_RESTORE, false);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	return pm && pm->restore ? pm->restore(dev) : 0;
 }
 EXPORT_SYMBOL_GPL(pm_generic_restore);
 
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index e2cc3d2..b462c0e 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -47,6 +47,7 @@
 LIST_HEAD(dpm_list);
 LIST_HEAD(dpm_prepared_list);
 LIST_HEAD(dpm_suspended_list);
+LIST_HEAD(dpm_late_early_list);
 LIST_HEAD(dpm_noirq_list);
 
 struct suspend_stats suspend_stats;
@@ -246,6 +247,40 @@
 }
 
 /**
+ * pm_late_early_op - Return the PM operation appropriate for given PM event.
+ * @ops: PM operations to choose from.
+ * @state: PM transition of the system being carried out.
+ *
+ * Runtime PM is disabled for @dev while this function is being executed.
+ */
+static pm_callback_t pm_late_early_op(const struct dev_pm_ops *ops,
+				      pm_message_t state)
+{
+	switch (state.event) {
+#ifdef CONFIG_SUSPEND
+	case PM_EVENT_SUSPEND:
+		return ops->suspend_late;
+	case PM_EVENT_RESUME:
+		return ops->resume_early;
+#endif /* CONFIG_SUSPEND */
+#ifdef CONFIG_HIBERNATE_CALLBACKS
+	case PM_EVENT_FREEZE:
+	case PM_EVENT_QUIESCE:
+		return ops->freeze_late;
+	case PM_EVENT_HIBERNATE:
+		return ops->poweroff_late;
+	case PM_EVENT_THAW:
+	case PM_EVENT_RECOVER:
+		return ops->thaw_early;
+	case PM_EVENT_RESTORE:
+		return ops->restore_early;
+#endif /* CONFIG_HIBERNATE_CALLBACKS */
+	}
+
+	return NULL;
+}
+
+/**
  * pm_noirq_op - Return the PM operation appropriate for given PM event.
  * @ops: PM operations to choose from.
  * @state: PM transition of the system being carried out.
@@ -374,21 +409,21 @@
 	TRACE_RESUME(0);
 
 	if (dev->pm_domain) {
-		info = "EARLY power domain ";
+		info = "noirq power domain ";
 		callback = pm_noirq_op(&dev->pm_domain->ops, state);
 	} else if (dev->type && dev->type->pm) {
-		info = "EARLY type ";
+		info = "noirq type ";
 		callback = pm_noirq_op(dev->type->pm, state);
 	} else if (dev->class && dev->class->pm) {
-		info = "EARLY class ";
+		info = "noirq class ";
 		callback = pm_noirq_op(dev->class->pm, state);
 	} else if (dev->bus && dev->bus->pm) {
-		info = "EARLY bus ";
+		info = "noirq bus ";
 		callback = pm_noirq_op(dev->bus->pm, state);
 	}
 
 	if (!callback && dev->driver && dev->driver->pm) {
-		info = "EARLY driver ";
+		info = "noirq driver ";
 		callback = pm_noirq_op(dev->driver->pm, state);
 	}
 
@@ -399,13 +434,13 @@
 }
 
 /**
- * dpm_resume_noirq - Execute "early resume" callbacks for non-sysdev devices.
+ * dpm_resume_noirq - Execute "noirq resume" callbacks for all devices.
  * @state: PM transition of the system being carried out.
  *
- * Call the "noirq" resume handlers for all devices marked as DPM_OFF_IRQ and
+ * Call the "noirq" resume handlers for all devices in dpm_noirq_list and
  * enable device drivers to receive interrupts.
  */
-void dpm_resume_noirq(pm_message_t state)
+static void dpm_resume_noirq(pm_message_t state)
 {
 	ktime_t starttime = ktime_get();
 
@@ -415,7 +450,7 @@
 		int error;
 
 		get_device(dev);
-		list_move_tail(&dev->power.entry, &dpm_suspended_list);
+		list_move_tail(&dev->power.entry, &dpm_late_early_list);
 		mutex_unlock(&dpm_list_mtx);
 
 		error = device_resume_noirq(dev, state);
@@ -423,6 +458,80 @@
 			suspend_stats.failed_resume_noirq++;
 			dpm_save_failed_step(SUSPEND_RESUME_NOIRQ);
 			dpm_save_failed_dev(dev_name(dev));
+			pm_dev_err(dev, state, " noirq", error);
+		}
+
+		mutex_lock(&dpm_list_mtx);
+		put_device(dev);
+	}
+	mutex_unlock(&dpm_list_mtx);
+	dpm_show_time(starttime, state, "noirq");
+	resume_device_irqs();
+}
+
+/**
+ * device_resume_early - Execute an "early resume" callback for given device.
+ * @dev: Device to handle.
+ * @state: PM transition of the system being carried out.
+ *
+ * Runtime PM is disabled for @dev while this function is being executed.
+ */
+static int device_resume_early(struct device *dev, pm_message_t state)
+{
+	pm_callback_t callback = NULL;
+	char *info = NULL;
+	int error = 0;
+
+	TRACE_DEVICE(dev);
+	TRACE_RESUME(0);
+
+	if (dev->pm_domain) {
+		info = "early power domain ";
+		callback = pm_late_early_op(&dev->pm_domain->ops, state);
+	} else if (dev->type && dev->type->pm) {
+		info = "early type ";
+		callback = pm_late_early_op(dev->type->pm, state);
+	} else if (dev->class && dev->class->pm) {
+		info = "early class ";
+		callback = pm_late_early_op(dev->class->pm, state);
+	} else if (dev->bus && dev->bus->pm) {
+		info = "early bus ";
+		callback = pm_late_early_op(dev->bus->pm, state);
+	}
+
+	if (!callback && dev->driver && dev->driver->pm) {
+		info = "early driver ";
+		callback = pm_late_early_op(dev->driver->pm, state);
+	}
+
+	error = dpm_run_callback(callback, dev, state, info);
+
+	TRACE_RESUME(error);
+	return error;
+}
+
+/**
+ * dpm_resume_early - Execute "early resume" callbacks for all devices.
+ * @state: PM transition of the system being carried out.
+ */
+static void dpm_resume_early(pm_message_t state)
+{
+	ktime_t starttime = ktime_get();
+
+	mutex_lock(&dpm_list_mtx);
+	while (!list_empty(&dpm_late_early_list)) {
+		struct device *dev = to_device(dpm_late_early_list.next);
+		int error;
+
+		get_device(dev);
+		list_move_tail(&dev->power.entry, &dpm_suspended_list);
+		mutex_unlock(&dpm_list_mtx);
+
+		error = device_resume_early(dev, state);
+		if (error) {
+			suspend_stats.failed_resume_early++;
+			dpm_save_failed_step(SUSPEND_RESUME_EARLY);
+			dpm_save_failed_dev(dev_name(dev));
 			pm_dev_err(dev, state, " early", error);
 		}
 
@@ -431,9 +540,18 @@
 	}
 	mutex_unlock(&dpm_list_mtx);
 	dpm_show_time(starttime, state, "early");
-	resume_device_irqs();
 }
-EXPORT_SYMBOL_GPL(dpm_resume_noirq);
+
+/**
+ * dpm_resume_start - Execute "noirq" and "early" device callbacks.
+ * @state: PM transition of the system being carried out.
+ */
+void dpm_resume_start(pm_message_t state)
+{
+	dpm_resume_noirq(state);
+	dpm_resume_early(state);
+}
+EXPORT_SYMBOL_GPL(dpm_resume_start);
 
 /**
  * device_resume - Execute "resume" callbacks for given device.
@@ -716,21 +834,21 @@
 	char *info = NULL;
 
 	if (dev->pm_domain) {
-		info = "LATE power domain ";
+		info = "noirq power domain ";
 		callback = pm_noirq_op(&dev->pm_domain->ops, state);
 	} else if (dev->type && dev->type->pm) {
-		info = "LATE type ";
+		info = "noirq type ";
 		callback = pm_noirq_op(dev->type->pm, state);
 	} else if (dev->class && dev->class->pm) {
-		info = "LATE class ";
+		info = "noirq class ";
 		callback = pm_noirq_op(dev->class->pm, state);
 	} else if (dev->bus && dev->bus->pm) {
-		info = "LATE bus ";
+		info = "noirq bus ";
 		callback = pm_noirq_op(dev->bus->pm, state);
 	}
 
 	if (!callback && dev->driver && dev->driver->pm) {
-		info = "LATE driver ";
+		info = "noirq driver ";
 		callback = pm_noirq_op(dev->driver->pm, state);
 	}
 
@@ -738,21 +856,21 @@
 }
 
 /**
- * dpm_suspend_noirq - Execute "late suspend" callbacks for non-sysdev devices.
+ * dpm_suspend_noirq - Execute "noirq suspend" callbacks for all devices.
  * @state: PM transition of the system being carried out.
  *
  * Prevent device drivers from receiving interrupts and call the "noirq" suspend
  * handlers for all non-sysdev devices.
  */
-int dpm_suspend_noirq(pm_message_t state)
+static int dpm_suspend_noirq(pm_message_t state)
 {
 	ktime_t starttime = ktime_get();
 	int error = 0;
 
 	suspend_device_irqs();
 	mutex_lock(&dpm_list_mtx);
-	while (!list_empty(&dpm_suspended_list)) {
-		struct device *dev = to_device(dpm_suspended_list.prev);
+	while (!list_empty(&dpm_late_early_list)) {
+		struct device *dev = to_device(dpm_late_early_list.prev);
 
 		get_device(dev);
 		mutex_unlock(&dpm_list_mtx);
@@ -761,7 +879,7 @@
 
 		mutex_lock(&dpm_list_mtx);
 		if (error) {
-			pm_dev_err(dev, state, " late", error);
+			pm_dev_err(dev, state, " noirq", error);
 			suspend_stats.failed_suspend_noirq++;
 			dpm_save_failed_step(SUSPEND_SUSPEND_NOIRQ);
 			dpm_save_failed_dev(dev_name(dev));
@@ -776,10 +894,95 @@
 	if (error)
 		dpm_resume_noirq(resume_event(state));
 	else
-		dpm_show_time(starttime, state, "late");
+		dpm_show_time(starttime, state, "noirq");
 	return error;
 }
-EXPORT_SYMBOL_GPL(dpm_suspend_noirq);
+
+/**
+ * device_suspend_late - Execute a "late suspend" callback for given device.
+ * @dev: Device to handle.
+ * @state: PM transition of the system being carried out.
+ *
+ * Runtime PM is disabled for @dev while this function is being executed.
+ */
+static int device_suspend_late(struct device *dev, pm_message_t state)
+{
+	pm_callback_t callback = NULL;
+	char *info = NULL;
+
+	if (dev->pm_domain) {
+		info = "late power domain ";
+		callback = pm_late_early_op(&dev->pm_domain->ops, state);
+	} else if (dev->type && dev->type->pm) {
+		info = "late type ";
+		callback = pm_late_early_op(dev->type->pm, state);
+	} else if (dev->class && dev->class->pm) {
+		info = "late class ";
+		callback = pm_late_early_op(dev->class->pm, state);
+	} else if (dev->bus && dev->bus->pm) {
+		info = "late bus ";
+		callback = pm_late_early_op(dev->bus->pm, state);
+	}
+
+	if (!callback && dev->driver && dev->driver->pm) {
+		info = "late driver ";
+		callback = pm_late_early_op(dev->driver->pm, state);
+	}
+
+	return dpm_run_callback(callback, dev, state, info);
+}
+
+/**
+ * dpm_suspend_late - Execute "late suspend" callbacks for all devices.
+ * @state: PM transition of the system being carried out.
+ */
+static int dpm_suspend_late(pm_message_t state)
+{
+	ktime_t starttime = ktime_get();
+	int error = 0;
+
+	mutex_lock(&dpm_list_mtx);
+	while (!list_empty(&dpm_suspended_list)) {
+		struct device *dev = to_device(dpm_suspended_list.prev);
+
+		get_device(dev);
+		mutex_unlock(&dpm_list_mtx);
+
+		error = device_suspend_late(dev, state);
+
+		mutex_lock(&dpm_list_mtx);
+		if (error) {
+			pm_dev_err(dev, state, " late", error);
+			suspend_stats.failed_suspend_late++;
+			dpm_save_failed_step(SUSPEND_SUSPEND_LATE);
+			dpm_save_failed_dev(dev_name(dev));
+			put_device(dev);
+			break;
+		}
+		if (!list_empty(&dev->power.entry))
+			list_move(&dev->power.entry, &dpm_late_early_list);
+		put_device(dev);
+	}
+	mutex_unlock(&dpm_list_mtx);
+	if (error)
+		dpm_resume_early(resume_event(state));
+	else
+		dpm_show_time(starttime, state, "late");
+
+	return error;
+}
+
+/**
+ * dpm_suspend_end - Execute "late" and "noirq" device suspend callbacks.
+ * @state: PM transition of the system being carried out.
+ */
+int dpm_suspend_end(pm_message_t state)
+{
+	int error = dpm_suspend_late(state);
+
+	return error ? : dpm_suspend_noirq(state);
+}
+EXPORT_SYMBOL_GPL(dpm_suspend_end);
 
 /**
  * legacy_suspend - Execute a legacy (bus or class) suspend callback for device.
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index 9bf6232..eeb4bff 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -71,6 +71,8 @@
 extern void rpm_sysfs_remove(struct device *dev);
 extern int wakeup_sysfs_add(struct device *dev);
 extern void wakeup_sysfs_remove(struct device *dev);
+extern int pm_qos_sysfs_add(struct device *dev);
+extern void pm_qos_sysfs_remove(struct device *dev);
 
 #else /* CONFIG_PM */
 
@@ -79,5 +81,7 @@
 static inline void rpm_sysfs_remove(struct device *dev) {}
 static inline int wakeup_sysfs_add(struct device *dev) { return 0; }
 static inline void wakeup_sysfs_remove(struct device *dev) {}
+static inline int pm_qos_sysfs_add(struct device *dev) { return 0; }
+static inline void pm_qos_sysfs_remove(struct device *dev) {}
 
 #endif
diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c
index c5d3588..7185557 100644
--- a/drivers/base/power/qos.c
+++ b/drivers/base/power/qos.c
@@ -41,6 +41,7 @@
 #include <linux/mutex.h>
 #include <linux/export.h>
 
+#include "power.h"
 
 static DEFINE_MUTEX(dev_pm_qos_mtx);
 
@@ -166,6 +167,12 @@
 	struct dev_pm_qos_request *req, *tmp;
 	struct pm_qos_constraints *c;
 
+	/*
+	 * If the device's PM QoS resume latency limit has been exposed to user
+	 * space, it has to be hidden at this point.
+	 */
+	dev_pm_qos_hide_latency_limit(dev);
+
 	mutex_lock(&dev_pm_qos_mtx);
 
 	dev->power.power_state = PMSG_INVALID;
@@ -445,3 +452,57 @@
 	return error;
 }
 EXPORT_SYMBOL_GPL(dev_pm_qos_add_ancestor_request);
+
+#ifdef CONFIG_PM_RUNTIME
+static void __dev_pm_qos_drop_user_request(struct device *dev)
+{
+	dev_pm_qos_remove_request(dev->power.pq_req);
+	dev->power.pq_req = 0;
+}
+
+/**
+ * dev_pm_qos_expose_latency_limit - Expose PM QoS latency limit to user space.
+ * @dev: Device whose PM QoS latency limit is to be exposed to user space.
+ * @value: Initial value of the latency limit.
+ */
+int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value)
+{
+	struct dev_pm_qos_request *req;
+	int ret;
+
+	if (!device_is_registered(dev) || value < 0)
+		return -EINVAL;
+
+	if (dev->power.pq_req)
+		return -EEXIST;
+
+	req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	ret = dev_pm_qos_add_request(dev, req, value);
+	if (ret < 0)
+		return ret;
+
+	dev->power.pq_req = req;
+	ret = pm_qos_sysfs_add(dev);
+	if (ret)
+		__dev_pm_qos_drop_user_request(dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_expose_latency_limit);
+
+/**
+ * dev_pm_qos_hide_latency_limit - Hide PM QoS latency limit from user space.
+ * @dev: Device whose PM QoS latency limit is to be hidden from user space.
+ */
+void dev_pm_qos_hide_latency_limit(struct device *dev)
+{
+	if (dev->power.pq_req) {
+		pm_qos_sysfs_remove(dev);
+		__dev_pm_qos_drop_user_request(dev);
+	}
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit);
+#endif /* CONFIG_PM_RUNTIME */
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index adf41be0..95c12f6 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -5,6 +5,7 @@
 #include <linux/device.h>
 #include <linux/string.h>
 #include <linux/export.h>
+#include <linux/pm_qos.h>
 #include <linux/pm_runtime.h>
 #include <linux/atomic.h>
 #include <linux/jiffies.h>
@@ -217,6 +218,31 @@
 static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show,
 		autosuspend_delay_ms_store);
 
+static ssize_t pm_qos_latency_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", dev->power.pq_req->node.prio);
+}
+
+static ssize_t pm_qos_latency_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t n)
+{
+	s32 value;
+	int ret;
+
+	if (kstrtos32(buf, 0, &value))
+		return -EINVAL;
+
+	if (value < 0)
+		return -EINVAL;
+
+	ret = dev_pm_qos_update_request(dev->power.pq_req, value);
+	return ret < 0 ? ret : n;
+}
+
+static DEVICE_ATTR(pm_qos_resume_latency_us, 0644,
+		   pm_qos_latency_show, pm_qos_latency_store);
 #endif /* CONFIG_PM_RUNTIME */
 
 #ifdef CONFIG_PM_SLEEP
@@ -490,6 +516,17 @@
 	.attrs	= runtime_attrs,
 };
 
+static struct attribute *pm_qos_attrs[] = {
+#ifdef CONFIG_PM_RUNTIME
+	&dev_attr_pm_qos_resume_latency_us.attr,
+#endif /* CONFIG_PM_RUNTIME */
+	NULL,
+};
+static struct attribute_group pm_qos_attr_group = {
+	.name	= power_group_name,
+	.attrs	= pm_qos_attrs,
+};
+
 int dpm_sysfs_add(struct device *dev)
 {
 	int rc;
@@ -530,6 +567,16 @@
 	sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
 }
 
+int pm_qos_sysfs_add(struct device *dev)
+{
+	return sysfs_merge_group(&dev->kobj, &pm_qos_attr_group);
+}
+
+void pm_qos_sysfs_remove(struct device *dev)
+{
+	sysfs_unmerge_group(&dev->kobj, &pm_qos_attr_group);
+}
+
 void rpm_sysfs_remove(struct device *dev)
 {
 	sysfs_unmerge_group(&dev->kobj, &pm_runtime_attr_group);
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index caf995f..2a3e581 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -53,6 +53,23 @@
 static LIST_HEAD(wakeup_sources);
 
 /**
+ * wakeup_source_prepare - Prepare a new wakeup source for initialization.
+ * @ws: Wakeup source to prepare.
+ * @name: Pointer to the name of the new wakeup source.
+ *
+ * Callers must ensure that the @name string won't be freed when @ws is still in
+ * use.
+ */
+void wakeup_source_prepare(struct wakeup_source *ws, const char *name)
+{
+	if (ws) {
+		memset(ws, 0, sizeof(*ws));
+		ws->name = name;
+	}
+}
+EXPORT_SYMBOL_GPL(wakeup_source_prepare);
+
+/**
  * wakeup_source_create - Create a struct wakeup_source object.
  * @name: Name of the new wakeup source.
  */
@@ -60,37 +77,44 @@
 {
 	struct wakeup_source *ws;
 
-	ws = kzalloc(sizeof(*ws), GFP_KERNEL);
+	ws = kmalloc(sizeof(*ws), GFP_KERNEL);
 	if (!ws)
 		return NULL;
 
-	spin_lock_init(&ws->lock);
-	if (name)
-		ws->name = kstrdup(name, GFP_KERNEL);
-
+	wakeup_source_prepare(ws, name ? kstrdup(name, GFP_KERNEL) : NULL);
 	return ws;
 }
 EXPORT_SYMBOL_GPL(wakeup_source_create);
 
 /**
+ * wakeup_source_drop - Prepare a struct wakeup_source object for destruction.
+ * @ws: Wakeup source to prepare for destruction.
+ *
+ * Callers must ensure that __pm_stay_awake() or __pm_wakeup_event() will never
+ * be run in parallel with this function for the same wakeup source object.
+ */
+void wakeup_source_drop(struct wakeup_source *ws)
+{
+	if (!ws)
+		return;
+
+	del_timer_sync(&ws->timer);
+	__pm_relax(ws);
+}
+EXPORT_SYMBOL_GPL(wakeup_source_drop);
+
+/**
  * wakeup_source_destroy - Destroy a struct wakeup_source object.
  * @ws: Wakeup source to destroy.
+ *
+ * Use only for wakeup source objects created with wakeup_source_create().
  */
 void wakeup_source_destroy(struct wakeup_source *ws)
 {
 	if (!ws)
 		return;
 
-	spin_lock_irq(&ws->lock);
-	while (ws->active) {
-		spin_unlock_irq(&ws->lock);
-
-		schedule_timeout_interruptible(msecs_to_jiffies(TIMEOUT));
-
-		spin_lock_irq(&ws->lock);
-	}
-	spin_unlock_irq(&ws->lock);
-
+	wakeup_source_drop(ws);
 	kfree(ws->name);
 	kfree(ws);
 }
@@ -105,6 +129,7 @@
 	if (WARN_ON(!ws))
 		return;
 
+	spin_lock_init(&ws->lock);
 	setup_timer(&ws->timer, pm_wakeup_timer_fn, (unsigned long)ws);
 	ws->active = false;
 
@@ -152,8 +177,10 @@
  */
 void wakeup_source_unregister(struct wakeup_source *ws)
 {
-	wakeup_source_remove(ws);
-	wakeup_source_destroy(ws);
+	if (ws) {
+		wakeup_source_remove(ws);
+		wakeup_source_destroy(ws);
+	}
 }
 EXPORT_SYMBOL_GPL(wakeup_source_unregister);
 
@@ -349,7 +376,6 @@
 {
 	ws->active = true;
 	ws->active_count++;
-	ws->timer_expires = jiffies;
 	ws->last_time = ktime_get();
 
 	/* Increment the counter of events in progress. */
@@ -370,9 +396,14 @@
 		return;
 
 	spin_lock_irqsave(&ws->lock, flags);
+
 	ws->event_count++;
 	if (!ws->active)
 		wakeup_source_activate(ws);
+
+	del_timer(&ws->timer);
+	ws->timer_expires = 0;
+
 	spin_unlock_irqrestore(&ws->lock, flags);
 }
 EXPORT_SYMBOL_GPL(__pm_stay_awake);
@@ -438,6 +469,7 @@
 		ws->max_time = duration;
 
 	del_timer(&ws->timer);
+	ws->timer_expires = 0;
 
 	/*
 	 * Increment the counter of registered wakeup events and decrement the
@@ -492,11 +524,22 @@
  * pm_wakeup_timer_fn - Delayed finalization of a wakeup event.
  * @data: Address of the wakeup source object associated with the event source.
  *
- * Call __pm_relax() for the wakeup source whose address is stored in @data.
+ * Call wakeup_source_deactivate() for the wakeup source whose address is stored
+ * in @data if it is currently active and its timer has not been canceled and
+ * the expiration time of the timer is not in future.
  */
 static void pm_wakeup_timer_fn(unsigned long data)
 {
-	__pm_relax((struct wakeup_source *)data);
+	struct wakeup_source *ws = (struct wakeup_source *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ws->lock, flags);
+
+	if (ws->active && ws->timer_expires
+	    && time_after_eq(jiffies, ws->timer_expires))
+		wakeup_source_deactivate(ws);
+
+	spin_unlock_irqrestore(&ws->lock, flags);
 }
 
 /**
@@ -534,7 +577,7 @@
 	if (!expires)
 		expires = 1;
 
-	if (time_after(expires, ws->timer_expires)) {
+	if (!ws->timer_expires || time_after(expires, ws->timer_expires)) {
 		mod_timer(&ws->timer, expires);
 		ws->timer_expires = expires;
 	}
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index ca09bc4..32fe9ef5 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -32,6 +32,7 @@
 #include <linux/sh_timer.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/pm_domain.h>
 
 struct sh_cmt_priv {
 	void __iomem *mapbase;
@@ -689,6 +690,9 @@
 	struct sh_cmt_priv *p = platform_get_drvdata(pdev);
 	int ret;
 
+	if (!is_early_platform_device(pdev))
+		pm_genpd_dev_always_on(&pdev->dev, true);
+
 	if (p) {
 		dev_info(&pdev->dev, "kept as earlytimer\n");
 		return 0;
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index db8d595..a2172f6 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -31,6 +31,7 @@
 #include <linux/sh_timer.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/pm_domain.h>
 
 struct sh_mtu2_priv {
 	void __iomem *mapbase;
@@ -306,6 +307,9 @@
 	struct sh_mtu2_priv *p = platform_get_drvdata(pdev);
 	int ret;
 
+	if (!is_early_platform_device(pdev))
+		pm_genpd_dev_always_on(&pdev->dev, true);
+
 	if (p) {
 		dev_info(&pdev->dev, "kept as earlytimer\n");
 		return 0;
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 079e96a..97f54b6 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -32,6 +32,7 @@
 #include <linux/sh_timer.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/pm_domain.h>
 
 struct sh_tmu_priv {
 	void __iomem *mapbase;
@@ -410,6 +411,9 @@
 	struct sh_tmu_priv *p = platform_get_drvdata(pdev);
 	int ret;
 
+	if (!is_early_platform_device(pdev))
+		pm_genpd_dev_always_on(&pdev->dev, true);
+
 	if (p) {
 		dev_info(&pdev->dev, "kept as earlytimer\n");
 		return 0;
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index c189b82..70c31d4 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -83,6 +83,7 @@
 {
 	unsigned long freq;
 	int err = 0;
+	u32 flags = 0;
 
 	if (!mutex_is_locked(&devfreq->lock)) {
 		WARN(true, "devfreq->lock must be locked by the caller.\n");
@@ -94,7 +95,24 @@
 	if (err)
 		return err;
 
-	err = devfreq->profile->target(devfreq->dev.parent, &freq);
+	/*
+	 * Adjust the freuqency with user freq and QoS.
+	 *
+	 * List from the highest proiority
+	 * max_freq (probably called by thermal when it's too hot)
+	 * min_freq
+	 */
+
+	if (devfreq->min_freq && freq < devfreq->min_freq) {
+		freq = devfreq->min_freq;
+		flags &= ~DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use GLB */
+	}
+	if (devfreq->max_freq && freq > devfreq->max_freq) {
+		freq = devfreq->max_freq;
+		flags |= DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use LUB */
+	}
+
+	err = devfreq->profile->target(devfreq->dev.parent, &freq, flags);
 	if (err)
 		return err;
 
@@ -501,12 +519,82 @@
 		       !to_devfreq(dev)->governor->no_central_polling);
 }
 
+static ssize_t store_min_freq(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct devfreq *df = to_devfreq(dev);
+	unsigned long value;
+	int ret;
+	unsigned long max;
+
+	ret = sscanf(buf, "%lu", &value);
+	if (ret != 1)
+		goto out;
+
+	mutex_lock(&df->lock);
+	max = df->max_freq;
+	if (value && max && value > max) {
+		ret = -EINVAL;
+		goto unlock;
+	}
+
+	df->min_freq = value;
+	update_devfreq(df);
+	ret = count;
+unlock:
+	mutex_unlock(&df->lock);
+out:
+	return ret;
+}
+
+static ssize_t show_min_freq(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	return sprintf(buf, "%lu\n", to_devfreq(dev)->min_freq);
+}
+
+static ssize_t store_max_freq(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct devfreq *df = to_devfreq(dev);
+	unsigned long value;
+	int ret;
+	unsigned long min;
+
+	ret = sscanf(buf, "%lu", &value);
+	if (ret != 1)
+		goto out;
+
+	mutex_lock(&df->lock);
+	min = df->min_freq;
+	if (value && min && value < min) {
+		ret = -EINVAL;
+		goto unlock;
+	}
+
+	df->max_freq = value;
+	update_devfreq(df);
+	ret = count;
+unlock:
+	mutex_unlock(&df->lock);
+out:
+	return ret;
+}
+
+static ssize_t show_max_freq(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	return sprintf(buf, "%lu\n", to_devfreq(dev)->max_freq);
+}
+
 static struct device_attribute devfreq_attrs[] = {
 	__ATTR(governor, S_IRUGO, show_governor, NULL),
 	__ATTR(cur_freq, S_IRUGO, show_freq, NULL),
 	__ATTR(central_polling, S_IRUGO, show_central_polling, NULL),
 	__ATTR(polling_interval, S_IRUGO | S_IWUSR, show_polling_interval,
 	       store_polling_interval),
+	__ATTR(min_freq, S_IRUGO | S_IWUSR, show_min_freq, store_min_freq),
+	__ATTR(max_freq, S_IRUGO | S_IWUSR, show_max_freq, store_max_freq),
 	{ },
 };
 
@@ -555,14 +643,30 @@
  *			     freq value given to target callback.
  * @dev		The devfreq user device. (parent of devfreq)
  * @freq	The frequency given to target function
+ * @flags	Flags handed from devfreq framework.
  *
  */
-struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq)
+struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq,
+				    u32 flags)
 {
-	struct opp *opp = opp_find_freq_ceil(dev, freq);
+	struct opp *opp;
 
-	if (opp == ERR_PTR(-ENODEV))
+	if (flags & DEVFREQ_FLAG_LEAST_UPPER_BOUND) {
+		/* The freq is an upper bound. opp should be lower */
 		opp = opp_find_freq_floor(dev, freq);
+
+		/* If not available, use the closest opp */
+		if (opp == ERR_PTR(-ENODEV))
+			opp = opp_find_freq_ceil(dev, freq);
+	} else {
+		/* The freq is an lower bound. opp should be higher */
+		opp = opp_find_freq_ceil(dev, freq);
+
+		/* If not available, use the closest opp */
+		if (opp == ERR_PTR(-ENODEV))
+			opp = opp_find_freq_floor(dev, freq);
+	}
+
 	return opp;
 }
 
diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c
index 6460577..1a361e9 100644
--- a/drivers/devfreq/exynos4_bus.c
+++ b/drivers/devfreq/exynos4_bus.c
@@ -619,15 +619,19 @@
 	return err;
 }
 
-static int exynos4_bus_target(struct device *dev, unsigned long *_freq)
+static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
+			      u32 flags)
 {
 	int err = 0;
 	struct platform_device *pdev = container_of(dev, struct platform_device,
 						    dev);
 	struct busfreq_data *data = platform_get_drvdata(pdev);
-	struct opp *opp = devfreq_recommended_opp(dev, _freq);
-	unsigned long old_freq = opp_get_freq(data->curr_opp);
+	struct opp *opp = devfreq_recommended_opp(dev, _freq, flags);
 	unsigned long freq = opp_get_freq(opp);
+	unsigned long old_freq = opp_get_freq(data->curr_opp);
+
+	if (IS_ERR(opp))
+		return PTR_ERR(opp);
 
 	if (old_freq == freq)
 		return 0;
@@ -689,9 +693,7 @@
 static int exynos4_bus_get_dev_status(struct device *dev,
 				      struct devfreq_dev_status *stat)
 {
-	struct platform_device *pdev = container_of(dev, struct platform_device,
-						    dev);
-	struct busfreq_data *data = platform_get_drvdata(pdev);
+	struct busfreq_data *data = dev_get_drvdata(dev);
 	int busier_dmc;
 	int cycles_x2 = 2; /* 2 x cycles */
 	void __iomem *addr;
@@ -739,9 +741,7 @@
 
 static void exynos4_bus_exit(struct device *dev)
 {
-	struct platform_device *pdev = container_of(dev, struct platform_device,
-						    dev);
-	struct busfreq_data *data = platform_get_drvdata(pdev);
+	struct busfreq_data *data = dev_get_drvdata(dev);
 
 	devfreq_unregister_opp_notifier(dev, data->devfreq);
 }
@@ -1087,9 +1087,7 @@
 
 static int exynos4_busfreq_resume(struct device *dev)
 {
-	struct platform_device *pdev = container_of(dev, struct platform_device,
-						    dev);
-	struct busfreq_data *data = platform_get_drvdata(pdev);
+	struct busfreq_data *data = dev_get_drvdata(dev);
 
 	busfreq_mon_reset(data);
 	return 0;
@@ -1132,4 +1130,3 @@
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("EXYNOS4 busfreq driver with devfreq framework");
 MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
-MODULE_ALIAS("exynos4-busfreq");
diff --git a/drivers/devfreq/governor_performance.c b/drivers/devfreq/governor_performance.c
index c0596b2..574a06b 100644
--- a/drivers/devfreq/governor_performance.c
+++ b/drivers/devfreq/governor_performance.c
@@ -18,7 +18,10 @@
 	 * target callback should be able to get floor value as
 	 * said in devfreq.h
 	 */
-	*freq = UINT_MAX;
+	if (!df->max_freq)
+		*freq = UINT_MAX;
+	else
+		*freq = df->max_freq;
 	return 0;
 }
 
diff --git a/drivers/devfreq/governor_powersave.c b/drivers/devfreq/governor_powersave.c
index 2483a85..d742d4a 100644
--- a/drivers/devfreq/governor_powersave.c
+++ b/drivers/devfreq/governor_powersave.c
@@ -18,7 +18,7 @@
 	 * target callback should be able to get ceiling value as
 	 * said in devfreq.h
 	 */
-	*freq = 0;
+	*freq = df->min_freq;
 	return 0;
 }
 
diff --git a/drivers/devfreq/governor_simpleondemand.c b/drivers/devfreq/governor_simpleondemand.c
index efad8dc..a2e3eae 100644
--- a/drivers/devfreq/governor_simpleondemand.c
+++ b/drivers/devfreq/governor_simpleondemand.c
@@ -25,6 +25,7 @@
 	unsigned int dfso_upthreshold = DFSO_UPTHRESHOLD;
 	unsigned int dfso_downdifferential = DFSO_DOWNDIFFERENCTIAL;
 	struct devfreq_simple_ondemand_data *data = df->data;
+	unsigned long max = (df->max_freq) ? df->max_freq : UINT_MAX;
 
 	if (err)
 		return err;
@@ -41,7 +42,7 @@
 
 	/* Assume MAX if it is going to be divided by zero */
 	if (stat.total_time == 0) {
-		*freq = UINT_MAX;
+		*freq = max;
 		return 0;
 	}
 
@@ -54,13 +55,13 @@
 	/* Set MAX if it's busy enough */
 	if (stat.busy_time * 100 >
 	    stat.total_time * dfso_upthreshold) {
-		*freq = UINT_MAX;
+		*freq = max;
 		return 0;
 	}
 
 	/* Set MAX if we do not know the initial frequency */
 	if (stat.current_frequency == 0) {
-		*freq = UINT_MAX;
+		*freq = max;
 		return 0;
 	}
 
@@ -79,6 +80,11 @@
 	b = div_u64(b, (dfso_upthreshold - dfso_downdifferential / 2));
 	*freq = (unsigned long) b;
 
+	if (df->min_freq && *freq < df->min_freq)
+		*freq = df->min_freq;
+	if (df->max_freq && *freq > df->max_freq)
+		*freq = df->max_freq;
+
 	return 0;
 }
 
diff --git a/drivers/devfreq/governor_userspace.c b/drivers/devfreq/governor_userspace.c
index 4f8b563..0681246 100644
--- a/drivers/devfreq/governor_userspace.c
+++ b/drivers/devfreq/governor_userspace.c
@@ -25,10 +25,19 @@
 {
 	struct userspace_data *data = df->data;
 
-	if (!data->valid)
+	if (data->valid) {
+		unsigned long adjusted_freq = data->user_frequency;
+
+		if (df->max_freq && adjusted_freq > df->max_freq)
+			adjusted_freq = df->max_freq;
+
+		if (df->min_freq && adjusted_freq < df->min_freq)
+			adjusted_freq = df->min_freq;
+
+		*freq = adjusted_freq;
+	} else {
 		*freq = df->previous_freq; /* No user freq specified yet */
-	else
-		*freq = data->user_frequency;
+	}
 	return 0;
 }
 
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 352d479..75a4854 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -56,6 +56,7 @@
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/pagemap.h>
 #include <linux/platform_device.h>
+#include <linux/pm_qos.h>
 #include <linux/pm_runtime.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
@@ -1346,6 +1347,8 @@
 	if (ret < 0)
 		goto clean_up5;
 
+	dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
+
 	dev_info(&pdev->dev, "driver version %s\n", DRIVER_VERSION);
 	dev_dbg(&pdev->dev, "chip ver H'%04x\n",
 		sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
@@ -1376,6 +1379,8 @@
 	host->dying = true;
 	pm_runtime_get_sync(&pdev->dev);
 
+	dev_pm_qos_hide_latency_limit(&pdev->dev);
+
 	mmc_remove_host(host->mmc);
 	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
 
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 5f9ad74..e219889 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -39,6 +39,7 @@
 #include <linux/module.h>
 #include <linux/pagemap.h>
 #include <linux/platform_device.h>
+#include <linux/pm_qos.h>
 #include <linux/pm_runtime.h>
 #include <linux/scatterlist.h>
 #include <linux/spinlock.h>
@@ -955,6 +956,8 @@
 
 	mmc_add_host(mmc);
 
+	dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
+
 	/* Unmask the IRQs we want to know about */
 	if (!_host->chan_rx)
 		irq_mask |= TMIO_MASK_READOP;
@@ -993,6 +996,8 @@
 		|| host->mmc->caps & MMC_CAP_NONREMOVABLE)
 		pm_runtime_get_sync(&pdev->dev);
 
+	dev_pm_qos_hide_latency_limit(&pdev->dev);
+
 	mmc_remove_host(host->mmc);
 	cancel_work_sync(&host->done);
 	cancel_delayed_work_sync(&host->delayed_reset_work);
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index ce4fa08..9e14ae6 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -129,9 +129,9 @@
 	printk(KERN_DEBUG "suspending xenstore...\n");
 	xs_suspend();
 
-	err = dpm_suspend_noirq(PMSG_FREEZE);
+	err = dpm_suspend_end(PMSG_FREEZE);
 	if (err) {
-		printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err);
+		printk(KERN_ERR "dpm_suspend_end failed: %d\n", err);
 		goto out_resume;
 	}
 
@@ -149,7 +149,7 @@
 
 	err = stop_machine(xen_suspend, &si, cpumask_of(0));
 
-	dpm_resume_noirq(si.cancelled ? PMSG_THAW : PMSG_RESTORE);
+	dpm_resume_start(si.cancelled ? PMSG_THAW : PMSG_RESTORE);
 
 	if (err) {
 		printk(KERN_ERR "failed to start xen_suspend: %d\n", err);
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index e49e81b..0971e92 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -129,6 +129,8 @@
 	setup_timer(&journal->j_commit_timer, commit_timeout,
 			(unsigned long)current);
 
+	set_freezable();
+
 	/* Record that the journal thread is running */
 	journal->j_task = current;
 	wake_up(&journal->j_wait_done_commit);
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 5ff8940..839377e 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -139,6 +139,8 @@
 	setup_timer(&journal->j_commit_timer, commit_timeout,
 			(unsigned long)current);
 
+	set_freezable();
+
 	/* Record that the journal thread is running */
 	journal->j_task = current;
 	wake_up(&journal->j_wait_done_commit);
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index 98ce812..281c72a 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -44,6 +44,14 @@
 	void *private_data;
 };
 
+/*
+ * The resulting frequency should be at most this. (this bound is the
+ * least upper bound; thus, the resulting freq should be lower or same)
+ * If the flag is not set, the resulting frequency should be at most the
+ * bound (greatest lower bound)
+ */
+#define DEVFREQ_FLAG_LEAST_UPPER_BOUND		0x1
+
 /**
  * struct devfreq_dev_profile - Devfreq's user device profile
  * @initial_freq	The operating frequency when devfreq_add_device() is
@@ -54,6 +62,8 @@
  *			higher than any operable frequency, set maximum.
  *			Before returning, target function should set
  *			freq at the current frequency.
+ *			The "flags" parameter's possible values are
+ *			explained above with "DEVFREQ_FLAG_*" macros.
  * @get_dev_status	The device should provide the current performance
  *			status to devfreq, which is used by governors.
  * @exit		An optional callback that is called when devfreq
@@ -66,7 +76,7 @@
 	unsigned long initial_freq;
 	unsigned int polling_ms;
 
-	int (*target)(struct device *dev, unsigned long *freq);
+	int (*target)(struct device *dev, unsigned long *freq, u32 flags);
 	int (*get_dev_status)(struct device *dev,
 			      struct devfreq_dev_status *stat);
 	void (*exit)(struct device *dev);
@@ -124,6 +134,8 @@
  *		touch this.
  * @being_removed	a flag to mark that this object is being removed in
  *			order to prevent trying to remove the object multiple times.
+ * @min_freq	Limit minimum frequency requested by user (0: none)
+ * @max_freq	Limit maximum frequency requested by user (0: none)
  *
  * This structure stores the devfreq information for a give device.
  *
@@ -149,6 +161,9 @@
 	void *data; /* private data for governors */
 
 	bool being_removed;
+
+	unsigned long min_freq;
+	unsigned long max_freq;
 };
 
 #if defined(CONFIG_PM_DEVFREQ)
@@ -160,7 +175,7 @@
 
 /* Helper functions for devfreq user device driver with OPP. */
 extern struct opp *devfreq_recommended_opp(struct device *dev,
-					   unsigned long *freq);
+					   unsigned long *freq, u32 flags);
 extern int devfreq_register_opp_notifier(struct device *dev,
 					 struct devfreq *devfreq);
 extern int devfreq_unregister_opp_notifier(struct device *dev,
@@ -200,18 +215,18 @@
 static struct devfreq *devfreq_add_device(struct device *dev,
 					  struct devfreq_dev_profile *profile,
 					  struct devfreq_governor *governor,
-					  void *data);
+					  void *data)
 {
 	return NULL;
 }
 
-static int devfreq_remove_device(struct devfreq *devfreq);
+static int devfreq_remove_device(struct devfreq *devfreq)
 {
 	return 0;
 }
 
 static struct opp *devfreq_recommended_opp(struct device *dev,
-					   unsigned long *freq)
+					   unsigned long *freq, u32 flags)
 {
 	return -EINVAL;
 }
diff --git a/include/linux/pm.h b/include/linux/pm.h
index e4982ac..715305e 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -110,6 +110,10 @@
  *	Subsystem-level @suspend() is executed for all devices after invoking
  *	subsystem-level @prepare() for all of them.
  *
+ * @suspend_late: Continue operations started by @suspend().  For a number of
+ *	devices @suspend_late() may point to the same callback routine as the
+ *	runtime suspend callback.
+ *
  * @resume: Executed after waking the system up from a sleep state in which the
  *	contents of main memory were preserved.  The exact action to perform
  *	depends on the device's subsystem, but generally the driver is expected
@@ -122,6 +126,10 @@
  *	Subsystem-level @resume() is executed for all devices after invoking
  *	subsystem-level @resume_noirq() for all of them.
  *
+ * @resume_early: Prepare to execute @resume().  For a number of devices
+ *	@resume_early() may point to the same callback routine as the runtime
+ *	resume callback.
+ *
  * @freeze: Hibernation-specific, executed before creating a hibernation image.
  *	Analogous to @suspend(), but it should not enable the device to signal
  *	wakeup events or change its power state.  The majority of subsystems
@@ -131,6 +139,10 @@
  *	Subsystem-level @freeze() is executed for all devices after invoking
  *	subsystem-level @prepare() for all of them.
  *
+ * @freeze_late: Continue operations started by @freeze().  Analogous to
+ *	@suspend_late(), but it should not enable the device to signal wakeup
+ *	events or change its power state.
+ *
  * @thaw: Hibernation-specific, executed after creating a hibernation image OR
  *	if the creation of an image has failed.  Also executed after a failing
  *	attempt to restore the contents of main memory from such an image.
@@ -140,15 +152,23 @@
  *	subsystem-level @thaw_noirq() for all of them.  It also may be executed
  *	directly after @freeze() in case of a transition error.
  *
+ * @thaw_early: Prepare to execute @thaw().  Undo the changes made by the
+ *	preceding @freeze_late().
+ *
  * @poweroff: Hibernation-specific, executed after saving a hibernation image.
  *	Analogous to @suspend(), but it need not save the device's settings in
  *	memory.
  *	Subsystem-level @poweroff() is executed for all devices after invoking
  *	subsystem-level @prepare() for all of them.
  *
+ * @poweroff_late: Continue operations started by @poweroff().  Analogous to
+ *	@suspend_late(), but it need not save the device's settings in memory.
+ *
  * @restore: Hibernation-specific, executed after restoring the contents of main
  *	memory from a hibernation image, analogous to @resume().
  *
+ * @restore_early: Prepare to execute @restore(), analogous to @resume_early().
+ *
  * @suspend_noirq: Complete the actions started by @suspend().  Carry out any
  *	additional operations required for suspending the device that might be
  *	racing with its driver's interrupt handler, which is guaranteed not to
@@ -158,9 +178,10 @@
  *	@suspend_noirq() has returned successfully.  If the device can generate
  *	system wakeup signals and is enabled to wake up the system, it should be
  *	configured to do so at that time.  However, depending on the platform
- *	and device's subsystem, @suspend() may be allowed to put the device into
- *	the low-power state and configure it to generate wakeup signals, in
- *	which case it generally is not necessary to define @suspend_noirq().
+ *	and device's subsystem, @suspend() or @suspend_late() may be allowed to
+ *	put the device into the low-power state and configure it to generate
+ *	wakeup signals, in which case it generally is not necessary to define
+ *	@suspend_noirq().
  *
  * @resume_noirq: Prepare for the execution of @resume() by carrying out any
  *	operations required for resuming the device that might be racing with
@@ -171,9 +192,9 @@
  *	additional operations required for freezing the device that might be
  *	racing with its driver's interrupt handler, which is guaranteed not to
  *	run while @freeze_noirq() is being executed.
- *	The power state of the device should not be changed by either @freeze()
- *	or @freeze_noirq() and it should not be configured to signal system
- *	wakeup by any of these callbacks.
+ *	The power state of the device should not be changed by either @freeze(),
+ *	or @freeze_late(), or @freeze_noirq() and it should not be configured to
+ *	signal system wakeup by any of these callbacks.
  *
  * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any
  *	operations required for thawing the device that might be racing with its
@@ -249,6 +270,12 @@
 	int (*thaw)(struct device *dev);
 	int (*poweroff)(struct device *dev);
 	int (*restore)(struct device *dev);
+	int (*suspend_late)(struct device *dev);
+	int (*resume_early)(struct device *dev);
+	int (*freeze_late)(struct device *dev);
+	int (*thaw_early)(struct device *dev);
+	int (*poweroff_late)(struct device *dev);
+	int (*restore_early)(struct device *dev);
 	int (*suspend_noirq)(struct device *dev);
 	int (*resume_noirq)(struct device *dev);
 	int (*freeze_noirq)(struct device *dev);
@@ -293,6 +320,15 @@
 /*
  * Use this for defining a set of PM operations to be used in all situations
  * (sustem suspend, hibernation or runtime PM).
+ * NOTE: In general, system suspend callbacks, .suspend() and .resume(), should
+ * be different from the corresponding runtime PM callbacks, .runtime_suspend(),
+ * and .runtime_resume(), because .runtime_suspend() always works on an already
+ * quiescent device, while .suspend() should assume that the device may be doing
+ * something when it is called (it should ensure that the device will be
+ * quiescent after it has returned).  Therefore it's better to point the "late"
+ * suspend and "early" resume callback pointers, .suspend_late() and
+ * .resume_early(), to the same routines as .runtime_suspend() and
+ * .runtime_resume(), respectively (and analogously for hibernation).
  */
 #define UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \
 const struct dev_pm_ops name = { \
@@ -510,6 +546,7 @@
 	unsigned long		accounting_timestamp;
 	ktime_t			suspend_time;
 	s64			max_time_suspended_ns;
+	struct dev_pm_qos_request *pq_req;
 #endif
 	struct pm_subsys_data	*subsys_data;  /* Owned by the subsystem. */
 	struct pm_qos_constraints *constraints;
@@ -584,13 +621,13 @@
 
 #ifdef CONFIG_PM_SLEEP
 extern void device_pm_lock(void);
-extern void dpm_resume_noirq(pm_message_t state);
+extern void dpm_resume_start(pm_message_t state);
 extern void dpm_resume_end(pm_message_t state);
 extern void dpm_resume(pm_message_t state);
 extern void dpm_complete(pm_message_t state);
 
 extern void device_pm_unlock(void);
-extern int dpm_suspend_noirq(pm_message_t state);
+extern int dpm_suspend_end(pm_message_t state);
 extern int dpm_suspend_start(pm_message_t state);
 extern int dpm_suspend(pm_message_t state);
 extern int dpm_prepare(pm_message_t state);
@@ -605,17 +642,23 @@
 extern int device_pm_wait_for_dev(struct device *sub, struct device *dev);
 
 extern int pm_generic_prepare(struct device *dev);
+extern int pm_generic_suspend_late(struct device *dev);
 extern int pm_generic_suspend_noirq(struct device *dev);
 extern int pm_generic_suspend(struct device *dev);
+extern int pm_generic_resume_early(struct device *dev);
 extern int pm_generic_resume_noirq(struct device *dev);
 extern int pm_generic_resume(struct device *dev);
 extern int pm_generic_freeze_noirq(struct device *dev);
+extern int pm_generic_freeze_late(struct device *dev);
 extern int pm_generic_freeze(struct device *dev);
 extern int pm_generic_thaw_noirq(struct device *dev);
+extern int pm_generic_thaw_early(struct device *dev);
 extern int pm_generic_thaw(struct device *dev);
 extern int pm_generic_restore_noirq(struct device *dev);
+extern int pm_generic_restore_early(struct device *dev);
 extern int pm_generic_restore(struct device *dev);
 extern int pm_generic_poweroff_noirq(struct device *dev);
+extern int pm_generic_poweroff_late(struct device *dev);
 extern int pm_generic_poweroff(struct device *dev);
 extern void pm_generic_complete(struct device *dev);
 
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index a03a0ad..1236d26 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -11,6 +11,7 @@
 
 #include <linux/device.h>
 #include <linux/err.h>
+#include <linux/of.h>
 
 enum gpd_status {
 	GPD_STATE_ACTIVE = 0,	/* PM domain is active */
@@ -70,6 +71,7 @@
 	s64 break_even_ns;	/* Power break even for the entire domain. */
 	s64 max_off_time_ns;	/* Maximum allowed "suspended" time. */
 	ktime_t power_off_time;
+	struct device_node *of_node; /* Node in device tree */
 };
 
 static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd)
@@ -97,14 +99,15 @@
 	struct gpd_dev_ops ops;
 	struct gpd_timing_data td;
 	bool need_restore;
+	bool always_on;
 };
 
+#ifdef CONFIG_PM_GENERIC_DOMAINS
 static inline struct generic_pm_domain_data *to_gpd_data(struct pm_domain_data *pdd)
 {
 	return container_of(pdd, struct generic_pm_domain_data, base);
 }
 
-#ifdef CONFIG_PM_GENERIC_DOMAINS
 static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev)
 {
 	return to_gpd_data(dev->power.subsys_data->domain_data);
@@ -117,14 +120,25 @@
 				 struct device *dev,
 				 struct gpd_timing_data *td);
 
+extern int __pm_genpd_of_add_device(struct device_node *genpd_node,
+				    struct device *dev,
+				    struct gpd_timing_data *td);
+
 static inline int pm_genpd_add_device(struct generic_pm_domain *genpd,
 				      struct device *dev)
 {
 	return __pm_genpd_add_device(genpd, dev, NULL);
 }
 
+static inline int pm_genpd_of_add_device(struct device_node *genpd_node,
+					 struct device *dev)
+{
+	return __pm_genpd_of_add_device(genpd_node, dev, NULL);
+}
+
 extern int pm_genpd_remove_device(struct generic_pm_domain *genpd,
 				  struct device *dev);
+extern void pm_genpd_dev_always_on(struct device *dev, bool val);
 extern int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
 				  struct generic_pm_domain *new_subdomain);
 extern int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
@@ -143,6 +157,10 @@
 extern struct dev_power_governor pm_domain_always_on_gov;
 #else
 
+static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev)
+{
+	return ERR_PTR(-ENOSYS);
+}
 static inline struct generic_pm_domain *dev_to_genpd(struct device *dev)
 {
 	return ERR_PTR(-ENOSYS);
@@ -163,6 +181,7 @@
 {
 	return -ENOSYS;
 }
+static inline void pm_genpd_dev_always_on(struct device *dev, bool val) {}
 static inline int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
 					 struct generic_pm_domain *new_sd)
 {
@@ -183,7 +202,8 @@
 {
 	return -ENOSYS;
 }
-static inline void pm_genpd_init(struct generic_pm_domain *genpd, bool is_off)
+static inline void pm_genpd_init(struct generic_pm_domain *genpd,
+				 struct dev_power_governor *gov, bool is_off)
 {
 }
 static inline int pm_genpd_poweron(struct generic_pm_domain *genpd)
@@ -194,6 +214,7 @@
 {
 	return false;
 }
+#define simple_qos_governor NULL
 #define pm_domain_always_on_gov NULL
 #endif
 
diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
index 4d99e4e..2e9191a 100644
--- a/include/linux/pm_qos.h
+++ b/include/linux/pm_qos.h
@@ -9,12 +9,16 @@
 #include <linux/miscdevice.h>
 #include <linux/device.h>
 
-#define PM_QOS_RESERVED 0
-#define PM_QOS_CPU_DMA_LATENCY 1
-#define PM_QOS_NETWORK_LATENCY 2
-#define PM_QOS_NETWORK_THROUGHPUT 3
+enum {
+	PM_QOS_RESERVED = 0,
+	PM_QOS_CPU_DMA_LATENCY,
+	PM_QOS_NETWORK_LATENCY,
+	PM_QOS_NETWORK_THROUGHPUT,
 
-#define PM_QOS_NUM_CLASSES 4
+	/* insert new class ID */
+	PM_QOS_NUM_CLASSES,
+};
+
 #define PM_QOS_DEFAULT_VALUE -1
 
 #define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
@@ -63,7 +67,6 @@
 	return req->dev != 0;
 }
 
-#ifdef CONFIG_PM
 int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node,
 			 enum pm_qos_req_action action, int value);
 void pm_qos_add_request(struct pm_qos_request *req, int pm_qos_class,
@@ -78,6 +81,7 @@
 int pm_qos_request_active(struct pm_qos_request *req);
 s32 pm_qos_read_value(struct pm_qos_constraints *c);
 
+#ifdef CONFIG_PM
 s32 __dev_pm_qos_read_value(struct device *dev);
 s32 dev_pm_qos_read_value(struct device *dev);
 int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
@@ -95,45 +99,6 @@
 int dev_pm_qos_add_ancestor_request(struct device *dev,
 				    struct dev_pm_qos_request *req, s32 value);
 #else
-static inline int pm_qos_update_target(struct pm_qos_constraints *c,
-				       struct plist_node *node,
-				       enum pm_qos_req_action action,
-				       int value)
-			{ return 0; }
-static inline void pm_qos_add_request(struct pm_qos_request *req,
-				      int pm_qos_class, s32 value)
-			{ return; }
-static inline void pm_qos_update_request(struct pm_qos_request *req,
-					 s32 new_value)
-			{ return; }
-static inline void pm_qos_remove_request(struct pm_qos_request *req)
-			{ return; }
-
-static inline int pm_qos_request(int pm_qos_class)
-{
-	switch (pm_qos_class) {
-	case PM_QOS_CPU_DMA_LATENCY:
-		return PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
-	case PM_QOS_NETWORK_LATENCY:
-		return PM_QOS_NETWORK_LAT_DEFAULT_VALUE;
-	case PM_QOS_NETWORK_THROUGHPUT:
-		return PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE;
-	default:
-		return PM_QOS_DEFAULT_VALUE;
-	}
-}
-
-static inline int pm_qos_add_notifier(int pm_qos_class,
-				      struct notifier_block *notifier)
-			{ return 0; }
-static inline int pm_qos_remove_notifier(int pm_qos_class,
-					 struct notifier_block *notifier)
-			{ return 0; }
-static inline int pm_qos_request_active(struct pm_qos_request *req)
-			{ return 0; }
-static inline s32 pm_qos_read_value(struct pm_qos_constraints *c)
-			{ return 0; }
-
 static inline s32 __dev_pm_qos_read_value(struct device *dev)
 			{ return 0; }
 static inline s32 dev_pm_qos_read_value(struct device *dev)
@@ -172,4 +137,13 @@
 			{ return 0; }
 #endif
 
+#ifdef CONFIG_PM_RUNTIME
+int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value);
+void dev_pm_qos_hide_latency_limit(struct device *dev);
+#else
+static inline int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value)
+			{ return 0; }
+static inline void dev_pm_qos_hide_latency_limit(struct device *dev) {}
+#endif
+
 #endif
diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h
index a32da96..d9f0511 100644
--- a/include/linux/pm_wakeup.h
+++ b/include/linux/pm_wakeup.h
@@ -41,7 +41,7 @@
  * @active: Status of the wakeup source.
  */
 struct wakeup_source {
-	char 			*name;
+	const char 		*name;
 	struct list_head	entry;
 	spinlock_t		lock;
 	struct timer_list	timer;
@@ -73,7 +73,9 @@
 }
 
 /* drivers/base/power/wakeup.c */
+extern void wakeup_source_prepare(struct wakeup_source *ws, const char *name);
 extern struct wakeup_source *wakeup_source_create(const char *name);
+extern void wakeup_source_drop(struct wakeup_source *ws);
 extern void wakeup_source_destroy(struct wakeup_source *ws);
 extern void wakeup_source_add(struct wakeup_source *ws);
 extern void wakeup_source_remove(struct wakeup_source *ws);
@@ -103,11 +105,16 @@
 	return dev->power.can_wakeup;
 }
 
+static inline void wakeup_source_prepare(struct wakeup_source *ws,
+					 const char *name) {}
+
 static inline struct wakeup_source *wakeup_source_create(const char *name)
 {
 	return NULL;
 }
 
+static inline void wakeup_source_drop(struct wakeup_source *ws) {}
+
 static inline void wakeup_source_destroy(struct wakeup_source *ws) {}
 
 static inline void wakeup_source_add(struct wakeup_source *ws) {}
@@ -165,4 +172,17 @@
 
 #endif /* !CONFIG_PM_SLEEP */
 
+static inline void wakeup_source_init(struct wakeup_source *ws,
+				      const char *name)
+{
+	wakeup_source_prepare(ws, name);
+	wakeup_source_add(ws);
+}
+
+static inline void wakeup_source_trash(struct wakeup_source *ws)
+{
+	wakeup_source_remove(ws);
+	wakeup_source_drop(ws);
+}
+
 #endif /* _LINUX_PM_WAKEUP_H */
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 91784a4..ac1c114 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -42,8 +42,10 @@
 	SUSPEND_FREEZE = 1,
 	SUSPEND_PREPARE,
 	SUSPEND_SUSPEND,
+	SUSPEND_SUSPEND_LATE,
 	SUSPEND_SUSPEND_NOIRQ,
 	SUSPEND_RESUME_NOIRQ,
+	SUSPEND_RESUME_EARLY,
 	SUSPEND_RESUME
 };
 
@@ -53,8 +55,10 @@
 	int	failed_freeze;
 	int	failed_prepare;
 	int	failed_suspend;
+	int	failed_suspend_late;
 	int	failed_suspend_noirq;
 	int	failed_resume;
+	int	failed_resume_early;
 	int	failed_resume_noirq;
 #define	REC_FAILED_NUM	2
 	int	last_failed_dev;
diff --git a/kernel/exit.c b/kernel/exit.c
index ce5f758..0ed15fe 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -424,7 +424,7 @@
 	 */
 	exit_mm(current);
 	/*
-	 * We don't want to have TIF_FREEZE set if the system-wide hibernation
+	 * We don't want to get frozen, in case system-wide hibernation
 	 * or suspend transition begins right now.
 	 */
 	current->flags |= (PF_NOFREEZE | PF_KTHREAD);
diff --git a/kernel/freezer.c b/kernel/freezer.c
index 9815b8d..11f82a4 100644
--- a/kernel/freezer.c
+++ b/kernel/freezer.c
@@ -99,9 +99,9 @@
  * freeze_task - send a freeze request to given task
  * @p: task to send the request to
  *
- * If @p is freezing, the freeze request is sent by setting %TIF_FREEZE
- * flag and either sending a fake signal to it or waking it up, depending
- * on whether it has %PF_FREEZER_NOSIG set.
+ * If @p is freezing, the freeze request is sent either by sending a fake
+ * signal (if it's not a kernel thread) or waking it up (if it's a kernel
+ * thread).
  *
  * RETURNS:
  * %false, if @p is not freezing or already frozen; %true, otherwise
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 7b08867..a6a675c 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1546,13 +1546,13 @@
 		if (error)
 			goto Resume_console;
 		/* At this point, dpm_suspend_start() has been called,
-		 * but *not* dpm_suspend_noirq(). We *must* call
-		 * dpm_suspend_noirq() now.  Otherwise, drivers for
+		 * but *not* dpm_suspend_end(). We *must* call
+		 * dpm_suspend_end() now.  Otherwise, drivers for
 		 * some devices (e.g. interrupt controllers) become
 		 * desynchronized with the actual state of the
 		 * hardware at resume time, and evil weirdness ensues.
 		 */
-		error = dpm_suspend_noirq(PMSG_FREEZE);
+		error = dpm_suspend_end(PMSG_FREEZE);
 		if (error)
 			goto Resume_devices;
 		error = disable_nonboot_cpus();
@@ -1579,7 +1579,7 @@
 		local_irq_enable();
  Enable_cpus:
 		enable_nonboot_cpus();
-		dpm_resume_noirq(PMSG_RESTORE);
+		dpm_resume_start(PMSG_RESTORE);
  Resume_devices:
 		dpm_resume_end(PMSG_RESTORE);
  Resume_console:
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index 07e0e28..66d808e 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -1,7 +1,8 @@
 
 ccflags-$(CONFIG_PM_DEBUG)	:= -DDEBUG
 
-obj-$(CONFIG_PM)		+= main.o qos.o
+obj-y				+= qos.o
+obj-$(CONFIG_PM)		+= main.o
 obj-$(CONFIG_VT_CONSOLE_SLEEP)	+= console.o
 obj-$(CONFIG_FREEZER)		+= process.o
 obj-$(CONFIG_SUSPEND)		+= suspend.o
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 6d6d288..0a186cf 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -245,8 +245,8 @@
  * create_image - Create a hibernation image.
  * @platform_mode: Whether or not to use the platform driver.
  *
- * Execute device drivers' .freeze_noirq() callbacks, create a hibernation image
- * and execute the drivers' .thaw_noirq() callbacks.
+ * Execute device drivers' "late" and "noirq" freeze callbacks, create a
+ * hibernation image and run the drivers' "noirq" and "early" thaw callbacks.
  *
  * Control reappears in this routine after the subsequent restore.
  */
@@ -254,7 +254,7 @@
 {
 	int error;
 
-	error = dpm_suspend_noirq(PMSG_FREEZE);
+	error = dpm_suspend_end(PMSG_FREEZE);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down, "
 			"aborting hibernation\n");
@@ -306,7 +306,7 @@
  Platform_finish:
 	platform_finish(platform_mode);
 
-	dpm_resume_noirq(in_suspend ?
+	dpm_resume_start(in_suspend ?
 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
 
 	return error;
@@ -343,13 +343,13 @@
 		 * successful freezer test.
 		 */
 		freezer_test_done = true;
-		goto Cleanup;
+		goto Thaw;
 	}
 
 	error = dpm_prepare(PMSG_FREEZE);
 	if (error) {
 		dpm_complete(PMSG_RECOVER);
-		goto Cleanup;
+		goto Thaw;
 	}
 
 	suspend_console();
@@ -385,6 +385,8 @@
 	platform_end(platform_mode);
 	return error;
 
+ Thaw:
+	thaw_kernel_threads();
  Cleanup:
 	swsusp_free();
 	goto Close;
@@ -394,16 +396,16 @@
  * resume_target_kernel - Restore system state from a hibernation image.
  * @platform_mode: Whether or not to use the platform driver.
  *
- * Execute device drivers' .freeze_noirq() callbacks, restore the contents of
- * highmem that have not been restored yet from the image and run the low-level
- * code that will restore the remaining contents of memory and switch to the
- * just restored target kernel.
+ * Execute device drivers' "noirq" and "late" freeze callbacks, restore the
+ * contents of highmem that have not been restored yet from the image and run
+ * the low-level code that will restore the remaining contents of memory and
+ * switch to the just restored target kernel.
  */
 static int resume_target_kernel(bool platform_mode)
 {
 	int error;
 
-	error = dpm_suspend_noirq(PMSG_QUIESCE);
+	error = dpm_suspend_end(PMSG_QUIESCE);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down, "
 			"aborting resume\n");
@@ -460,7 +462,7 @@
  Cleanup:
 	platform_restore_cleanup(platform_mode);
 
-	dpm_resume_noirq(PMSG_RECOVER);
+	dpm_resume_start(PMSG_RECOVER);
 
 	return error;
 }
@@ -518,7 +520,7 @@
 		goto Resume_devices;
 	}
 
-	error = dpm_suspend_noirq(PMSG_HIBERNATE);
+	error = dpm_suspend_end(PMSG_HIBERNATE);
 	if (error)
 		goto Resume_devices;
 
@@ -549,7 +551,7 @@
  Platform_finish:
 	hibernation_ops->finish();
 
-	dpm_resume_noirq(PMSG_RESTORE);
+	dpm_resume_start(PMSG_RESTORE);
 
  Resume_devices:
 	entering_platform_hibernation = false;
@@ -616,7 +618,7 @@
 	/* Allocate memory management structures */
 	error = create_basic_memory_bitmaps();
 	if (error)
-		goto Exit;
+		goto Enable_umh;
 
 	printk(KERN_INFO "PM: Syncing filesystems ... ");
 	sys_sync();
@@ -624,15 +626,11 @@
 
 	error = freeze_processes();
 	if (error)
-		goto Finish;
+		goto Free_bitmaps;
 
 	error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
-	if (error)
+	if (error || freezer_test_done)
 		goto Thaw;
-	if (freezer_test_done) {
-		freezer_test_done = false;
-		goto Thaw;
-	}
 
 	if (in_suspend) {
 		unsigned int flags = 0;
@@ -657,8 +655,13 @@
 
  Thaw:
 	thaw_processes();
- Finish:
+
+	/* Don't bother checking whether freezer_test_done is true */
+	freezer_test_done = false;
+
+ Free_bitmaps:
 	free_basic_memory_bitmaps();
+ Enable_umh:
 	usermodehelper_enable();
  Exit:
 	pm_notifier_call_chain(PM_POST_HIBERNATION);
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 9824b41e..1c12581 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -165,16 +165,20 @@
 	last_errno %= REC_FAILED_NUM;
 	last_step = suspend_stats.last_failed_step + REC_FAILED_NUM - 1;
 	last_step %= REC_FAILED_NUM;
-	seq_printf(s, "%s: %d\n%s: %d\n%s: %d\n%s: %d\n"
-			"%s: %d\n%s: %d\n%s: %d\n%s: %d\n",
+	seq_printf(s, "%s: %d\n%s: %d\n%s: %d\n%s: %d\n%s: %d\n"
+			"%s: %d\n%s: %d\n%s: %d\n%s: %d\n%s: %d\n",
 			"success", suspend_stats.success,
 			"fail", suspend_stats.fail,
 			"failed_freeze", suspend_stats.failed_freeze,
 			"failed_prepare", suspend_stats.failed_prepare,
 			"failed_suspend", suspend_stats.failed_suspend,
+			"failed_suspend_late",
+				suspend_stats.failed_suspend_late,
 			"failed_suspend_noirq",
 				suspend_stats.failed_suspend_noirq,
 			"failed_resume", suspend_stats.failed_resume,
+			"failed_resume_early",
+				suspend_stats.failed_resume_early,
 			"failed_resume_noirq",
 				suspend_stats.failed_resume_noirq);
 	seq_printf(s,	"failures:\n  last_failed_dev:\t%-s\n",
@@ -287,16 +291,10 @@
 
 #ifdef CONFIG_SUSPEND
 	for (s = &pm_states[state]; state < PM_SUSPEND_MAX; s++, state++) {
-		if (*s && len == strlen(*s) && !strncmp(buf, *s, len))
+		if (*s && len == strlen(*s) && !strncmp(buf, *s, len)) {
+			error = pm_suspend(state);
 			break;
-	}
-	if (state < PM_SUSPEND_MAX && *s) {
-		error = enter_state(state);
-		if (error) {
-			suspend_stats.fail++;
-			dpm_save_failed_errno(error);
-		} else
-			suspend_stats.success++;
+		}
 	}
 #endif
 
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 21724ee..98f3622 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -177,13 +177,11 @@
 
 extern bool valid_state(suspend_state_t state);
 extern int suspend_devices_and_enter(suspend_state_t state);
-extern int enter_state(suspend_state_t state);
 #else /* !CONFIG_SUSPEND */
 static inline int suspend_devices_and_enter(suspend_state_t state)
 {
 	return -ENOSYS;
 }
-static inline int enter_state(suspend_state_t state) { return -ENOSYS; }
 static inline bool valid_state(suspend_state_t state) { return false; }
 #endif /* !CONFIG_SUSPEND */
 
@@ -234,16 +232,14 @@
 	int error;
 
 	error = freeze_processes();
-
 	/*
 	 * freeze_processes() automatically thaws every task if freezing
 	 * fails. So we need not do anything extra upon error.
 	 */
 	if (error)
-		goto Finish;
+		return error;
 
 	error = freeze_kernel_threads();
-
 	/*
 	 * freeze_kernel_threads() thaws only kernel threads upon freezing
 	 * failure. So we have to thaw the userspace tasks ourselves.
@@ -251,7 +247,6 @@
 	if (error)
 		thaw_processes();
 
- Finish:
 	return error;
 }
 
diff --git a/kernel/power/process.c b/kernel/power/process.c
index 7e42645..0d2aeb2 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -53,11 +53,9 @@
 			 * It is "frozen enough".  If the task does wake
 			 * up, it will immediately call try_to_freeze.
 			 *
-			 * Because freeze_task() goes through p's
-			 * scheduler lock after setting TIF_FREEZE, it's
-			 * guaranteed that either we see TASK_RUNNING or
-			 * try_to_stop() after schedule() in ptrace/signal
-			 * stop sees TIF_FREEZE.
+			 * Because freeze_task() goes through p's scheduler lock, it's
+			 * guaranteed that TASK_STOPPED/TRACED -> TASK_RUNNING
+			 * transition can't race with task state testing here.
 			 */
 			if (!task_is_stopped_or_traced(p) &&
 			    !freezer_should_skip(p))
@@ -98,13 +96,15 @@
 		       elapsed_csecs / 100, elapsed_csecs % 100,
 		       todo - wq_busy, wq_busy);
 
-		read_lock(&tasklist_lock);
-		do_each_thread(g, p) {
-			if (!wakeup && !freezer_should_skip(p) &&
-			    p != current && freezing(p) && !frozen(p))
-				sched_show_task(p);
-		} while_each_thread(g, p);
-		read_unlock(&tasklist_lock);
+		if (!wakeup) {
+			read_lock(&tasklist_lock);
+			do_each_thread(g, p) {
+				if (p != current && !freezer_should_skip(p)
+				    && freezing(p) && !frozen(p))
+					sched_show_task(p);
+			} while_each_thread(g, p);
+			read_unlock(&tasklist_lock);
+		}
 	} else {
 		printk("(elapsed %d.%02d seconds) ", elapsed_csecs / 100,
 			elapsed_csecs % 100);
diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index 995e3bd3..d6d6dbd 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c
@@ -469,21 +469,18 @@
 static int __init pm_qos_power_init(void)
 {
 	int ret = 0;
+	int i;
 
-	ret = register_pm_qos_misc(&cpu_dma_pm_qos);
-	if (ret < 0) {
-		printk(KERN_ERR "pm_qos_param: cpu_dma_latency setup failed\n");
-		return ret;
+	BUILD_BUG_ON(ARRAY_SIZE(pm_qos_array) != PM_QOS_NUM_CLASSES);
+
+	for (i = 1; i < PM_QOS_NUM_CLASSES; i++) {
+		ret = register_pm_qos_misc(pm_qos_array[i]);
+		if (ret < 0) {
+			printk(KERN_ERR "pm_qos_param: %s setup failed\n",
+			       pm_qos_array[i]->name);
+			return ret;
+		}
 	}
-	ret = register_pm_qos_misc(&network_lat_pm_qos);
-	if (ret < 0) {
-		printk(KERN_ERR "pm_qos_param: network_latency setup failed\n");
-		return ret;
-	}
-	ret = register_pm_qos_misc(&network_throughput_pm_qos);
-	if (ret < 0)
-		printk(KERN_ERR
-			"pm_qos_param: network_throughput setup failed\n");
 
 	return ret;
 }
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 3a564ac..0de2857 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -711,9 +711,10 @@
 	list_for_each_entry(region, &nosave_regions, list) {
 		unsigned long pfn;
 
-		pr_debug("PM: Marking nosave pages: %016lx - %016lx\n",
-				region->start_pfn << PAGE_SHIFT,
-				region->end_pfn << PAGE_SHIFT);
+		pr_debug("PM: Marking nosave pages: [mem %#010llx-%#010llx]\n",
+			 (unsigned long long) region->start_pfn << PAGE_SHIFT,
+			 ((unsigned long long) region->end_pfn << PAGE_SHIFT)
+				- 1);
 
 		for (pfn = region->start_pfn; pfn < region->end_pfn; pfn++)
 			if (pfn_valid(pfn)) {
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 4fd51be..88e5c967 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -37,8 +37,8 @@
 static const struct platform_suspend_ops *suspend_ops;
 
 /**
- *	suspend_set_ops - Set the global suspend method table.
- *	@ops:	Pointer to ops structure.
+ * suspend_set_ops - Set the global suspend method table.
+ * @ops: Suspend operations to use.
  */
 void suspend_set_ops(const struct platform_suspend_ops *ops)
 {
@@ -58,11 +58,11 @@
 }
 
 /**
- * suspend_valid_only_mem - generic memory-only valid callback
+ * suspend_valid_only_mem - Generic memory-only valid callback.
  *
- * Platform drivers that implement mem suspend only and only need
- * to check for that in their .valid callback can use this instead
- * of rolling their own .valid callback.
+ * Platform drivers that implement mem suspend only and only need to check for
+ * that in their .valid() callback can use this instead of rolling their own
+ * .valid() callback.
  */
 int suspend_valid_only_mem(suspend_state_t state)
 {
@@ -83,10 +83,11 @@
 }
 
 /**
- *	suspend_prepare - Do prep work before entering low-power state.
+ * suspend_prepare - Prepare for entering system sleep state.
  *
- *	This is common code that is called for each state that we're entering.
- *	Run suspend notifiers, allocate a console and stop all processes.
+ * Common code run for every system sleep state that can be entered (except for
+ * hibernation).  Run suspend notifiers, allocate the "suspend" console and
+ * freeze processes.
  */
 static int suspend_prepare(void)
 {
@@ -131,9 +132,9 @@
 }
 
 /**
- * suspend_enter - enter the desired system sleep state.
- * @state: State to enter
- * @wakeup: Returns information that suspend should not be entered again.
+ * suspend_enter - Make the system enter the given sleep state.
+ * @state: System sleep state to enter.
+ * @wakeup: Returns information that the sleep state should not be re-entered.
  *
  * This function should be called after devices have been suspended.
  */
@@ -147,7 +148,7 @@
 			goto Platform_finish;
 	}
 
-	error = dpm_suspend_noirq(PMSG_SUSPEND);
+	error = dpm_suspend_end(PMSG_SUSPEND);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down\n");
 		goto Platform_finish;
@@ -189,7 +190,7 @@
 	if (suspend_ops->wake)
 		suspend_ops->wake();
 
-	dpm_resume_noirq(PMSG_RESUME);
+	dpm_resume_start(PMSG_RESUME);
 
  Platform_finish:
 	if (suspend_ops->finish)
@@ -199,9 +200,8 @@
 }
 
 /**
- *	suspend_devices_and_enter - suspend devices and enter the desired system
- *				    sleep state.
- *	@state:		  state to enter
+ * suspend_devices_and_enter - Suspend devices and enter system sleep state.
+ * @state: System sleep state to enter.
  */
 int suspend_devices_and_enter(suspend_state_t state)
 {
@@ -251,10 +251,10 @@
 }
 
 /**
- *	suspend_finish - Do final work before exiting suspend sequence.
+ * suspend_finish - Clean up before finishing the suspend sequence.
  *
- *	Call platform code to clean up, restart processes, and free the
- *	console that we've allocated. This is not called for suspend-to-disk.
+ * Call platform code to clean up, restart processes, and free the console that
+ * we've allocated. This routine is not called for hibernation.
  */
 static void suspend_finish(void)
 {
@@ -265,16 +265,14 @@
 }
 
 /**
- *	enter_state - Do common work of entering low-power state.
- *	@state:		pm_state structure for state we're entering.
+ * enter_state - Do common work needed to enter system sleep state.
+ * @state: System sleep state to enter.
  *
- *	Make sure we're the only ones trying to enter a sleep state. Fail
- *	if someone has beat us to it, since we don't want anything weird to
- *	happen when we wake up.
- *	Then, do the setup for suspend, enter the state, and cleaup (after
- *	we've woken up).
+ * Make sure that no one else is trying to put the system into a sleep state.
+ * Fail if that's not the case.  Otherwise, prepare for system suspend, make the
+ * system enter the given sleep state and clean up after wakeup.
  */
-int enter_state(suspend_state_t state)
+static int enter_state(suspend_state_t state)
 {
 	int error;
 
@@ -310,24 +308,26 @@
 }
 
 /**
- *	pm_suspend - Externally visible function for suspending system.
- *	@state:		Enumerated value of state to enter.
+ * pm_suspend - Externally visible function for suspending the system.
+ * @state: System sleep state to enter.
  *
- *	Determine whether or not value is within range, get state
- *	structure, and enter (above).
+ * Check if the value of @state represents one of the supported states,
+ * execute enter_state() and update system suspend statistics.
  */
 int pm_suspend(suspend_state_t state)
 {
-	int ret;
-	if (state > PM_SUSPEND_ON && state < PM_SUSPEND_MAX) {
-		ret = enter_state(state);
-		if (ret) {
-			suspend_stats.fail++;
-			dpm_save_failed_errno(ret);
-		} else
-			suspend_stats.success++;
-		return ret;
+	int error;
+
+	if (state <= PM_SUSPEND_ON || state >= PM_SUSPEND_MAX)
+		return -EINVAL;
+
+	error = enter_state(state);
+	if (error) {
+		suspend_stats.fail++;
+		dpm_save_failed_errno(error);
+	} else {
+		suspend_stats.success++;
 	}
-	return -EINVAL;
+	return error;
 }
 EXPORT_SYMBOL(pm_suspend);
diff --git a/kernel/power/user.c b/kernel/power/user.c
index 3e10007..33c4329 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -249,16 +249,10 @@
 		}
 		pm_restore_gfp_mask();
 		error = hibernation_snapshot(data->platform_support);
-		if (error) {
-			thaw_kernel_threads();
-		} else {
+		if (!error) {
 			error = put_user(in_suspend, (int __user *)arg);
-			if (!error && !freezer_test_done)
-				data->ready = 1;
-			if (freezer_test_done) {
-				freezer_test_done = false;
-				thaw_kernel_threads();
-			}
+			data->ready = !freezer_test_done && !error;
+			freezer_test_done = false;
 		}
 		break;