# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/arm,komeda.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Arm Komeda display processor

maintainers:
  - Liviu Dudau <Liviu.Dudau@arm.com>
  - Andre Przywara <andre.przywara@arm.com>

description:
  The Arm Mali D71 display processor supports up to two displays with up
  to a 4K resolution each. Each pipeline can be composed of up to four
  layers. It is typically connected to a digital display connector like HDMI.

properties:
  compatible:
    oneOf:
      - items:
          - const: arm,mali-d32
          - const: arm,mali-d71
      - const: arm,mali-d71

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clock-names:
    const: aclk

  clocks:
    maxItems: 1
    description: The main DPU processor clock

  "#address-cells":
    const: 1

  "#size-cells":
    const: 0

  memory-region:
    maxItems: 1
    description:
      Phandle to a node describing memory to be used for the framebuffer.
      If not present, the framebuffer may be located anywhere in memory.

  iommus:
    description:
      The stream IDs for each of the used pipelines, each four IDs for the
      four layers, plus one for the write-back stream.
    minItems: 5
    maxItems: 10

patternProperties:
  '^pipeline@[01]$':
    type: object
    description:
      clocks

    properties:
      reg:
        enum: [ 0, 1 ]

      clock-names:
        const: pxclk

      clocks:
        maxItems: 1
        description: The input reference for the pixel clock.

      port:
        $ref: /schemas/graph.yaml#/$defs/port-base
        unevaluatedProperties: false

additionalProperties: false

required:
  - "#address-cells"
  - "#size-cells"
  - compatible
  - reg
  - interrupts
  - clock-names
  - clocks
  - pipeline@0

examples:
  - |
    display@c00000 {
        #address-cells = <1>;
        #size-cells = <0>;
        compatible = "arm,mali-d71";
        reg = <0xc00000 0x20000>;
        interrupts = <168>;
        clocks = <&dpu_aclk>;
        clock-names = "aclk";
        iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
                 <&smmu 8>,
                 <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
                 <&smmu 9>;

        dp0_pipe0: pipeline@0 {
            clocks = <&fpgaosc2>;
            clock-names = "pxclk";
            reg = <0>;

            port {
                dp0_pipe0_out: endpoint {
                    remote-endpoint = <&db_dvi0_in>;
                };
            };
        };

        dp0_pipe1: pipeline@1 {
            clocks = <&fpgaosc2>;
            clock-names = "pxclk";
            reg = <1>;

            port {
                dp0_pipe1_out: endpoint {
                    remote-endpoint = <&db_dvi1_in>;
                };
            };
        };
    };
...