| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (c) 2011 David George <david.george@ska.ac.za> |
| * |
| * based on adm1021.c |
| * some credit to Christoph Scheurer, but largely a rewrite |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| |
| /* Addresses to scan */ |
| static const unsigned short max1668_addr_list[] = { |
| 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; |
| |
| /* max1668 registers */ |
| |
| #define MAX1668_REG_TEMP(nr) (nr) |
| #define MAX1668_REG_STAT1 0x05 |
| #define MAX1668_REG_STAT2 0x06 |
| #define MAX1668_REG_MAN_ID 0xfe |
| #define MAX1668_REG_DEV_ID 0xff |
| |
| /* limits */ |
| |
| /* write high limits */ |
| #define MAX1668_REG_LIMH_WR(nr) (0x13 + 2 * (nr)) |
| /* write low limits */ |
| #define MAX1668_REG_LIML_WR(nr) (0x14 + 2 * (nr)) |
| /* read high limits */ |
| #define MAX1668_REG_LIMH_RD(nr) (0x08 + 2 * (nr)) |
| /* read low limits */ |
| #define MAX1668_REG_LIML_RD(nr) (0x09 + 2 * (nr)) |
| |
| /* manufacturer and device ID Constants */ |
| #define MAN_ID_MAXIM 0x4d |
| #define DEV_ID_MAX1668 0x3 |
| #define DEV_ID_MAX1805 0x5 |
| #define DEV_ID_MAX1989 0xb |
| |
| /* read only mode module parameter */ |
| static bool read_only; |
| module_param(read_only, bool, 0); |
| MODULE_PARM_DESC(read_only, "Don't set any values, read only mode"); |
| |
| enum chips { max1668, max1805, max1989 }; |
| |
| struct max1668_data { |
| struct i2c_client *client; |
| const struct attribute_group *groups[3]; |
| enum chips type; |
| |
| struct mutex update_lock; |
| bool valid; /* true if following fields are valid */ |
| unsigned long last_updated; /* In jiffies */ |
| |
| /* 1x local and 4x remote */ |
| s8 temp_max[5]; |
| s8 temp_min[5]; |
| s8 temp[5]; |
| u16 alarms; |
| }; |
| |
| static struct max1668_data *max1668_update_device(struct device *dev) |
| { |
| struct max1668_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| struct max1668_data *ret = data; |
| s32 val; |
| int i; |
| |
| mutex_lock(&data->update_lock); |
| |
| if (data->valid && !time_after(jiffies, |
| data->last_updated + HZ + HZ / 2)) |
| goto abort; |
| |
| for (i = 0; i < 5; i++) { |
| val = i2c_smbus_read_byte_data(client, MAX1668_REG_TEMP(i)); |
| if (unlikely(val < 0)) { |
| ret = ERR_PTR(val); |
| goto abort; |
| } |
| data->temp[i] = (s8) val; |
| |
| val = i2c_smbus_read_byte_data(client, MAX1668_REG_LIMH_RD(i)); |
| if (unlikely(val < 0)) { |
| ret = ERR_PTR(val); |
| goto abort; |
| } |
| data->temp_max[i] = (s8) val; |
| |
| val = i2c_smbus_read_byte_data(client, MAX1668_REG_LIML_RD(i)); |
| if (unlikely(val < 0)) { |
| ret = ERR_PTR(val); |
| goto abort; |
| } |
| data->temp_min[i] = (s8) val; |
| } |
| |
| val = i2c_smbus_read_byte_data(client, MAX1668_REG_STAT1); |
| if (unlikely(val < 0)) { |
| ret = ERR_PTR(val); |
| goto abort; |
| } |
| data->alarms = val << 8; |
| |
| val = i2c_smbus_read_byte_data(client, MAX1668_REG_STAT2); |
| if (unlikely(val < 0)) { |
| ret = ERR_PTR(val); |
| goto abort; |
| } |
| data->alarms |= val; |
| |
| data->last_updated = jiffies; |
| data->valid = true; |
| abort: |
| mutex_unlock(&data->update_lock); |
| |
| return ret; |
| } |
| |
| static ssize_t show_temp(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct max1668_data *data = max1668_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->temp[index] * 1000); |
| } |
| |
| static ssize_t show_temp_max(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct max1668_data *data = max1668_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->temp_max[index] * 1000); |
| } |
| |
| static ssize_t show_temp_min(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct max1668_data *data = max1668_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->temp_min[index] * 1000); |
| } |
| |
| static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| int index = to_sensor_dev_attr(attr)->index; |
| struct max1668_data *data = max1668_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%u\n", (data->alarms >> index) & 0x1); |
| } |
| |
| static ssize_t show_fault(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct max1668_data *data = max1668_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%u\n", |
| (data->alarms & (1 << 12)) && data->temp[index] == 127); |
| } |
| |
| static ssize_t set_temp_max(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct max1668_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| long temp; |
| int ret; |
| |
| ret = kstrtol(buf, 10, &temp); |
| if (ret < 0) |
| return ret; |
| |
| mutex_lock(&data->update_lock); |
| data->temp_max[index] = clamp_val(temp/1000, -128, 127); |
| ret = i2c_smbus_write_byte_data(client, |
| MAX1668_REG_LIMH_WR(index), |
| data->temp_max[index]); |
| if (ret < 0) |
| count = ret; |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t set_temp_min(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| int index = to_sensor_dev_attr(devattr)->index; |
| struct max1668_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| long temp; |
| int ret; |
| |
| ret = kstrtol(buf, 10, &temp); |
| if (ret < 0) |
| return ret; |
| |
| mutex_lock(&data->update_lock); |
| data->temp_min[index] = clamp_val(temp/1000, -128, 127); |
| ret = i2c_smbus_write_byte_data(client, |
| MAX1668_REG_LIML_WR(index), |
| data->temp_min[index]); |
| if (ret < 0) |
| count = ret; |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); |
| static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, |
| set_temp_max, 0); |
| static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp_min, |
| set_temp_min, 0); |
| static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); |
| static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp_max, |
| set_temp_max, 1); |
| static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp_min, |
| set_temp_min, 1); |
| static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); |
| static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp_max, |
| set_temp_max, 2); |
| static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp_min, |
| set_temp_min, 2); |
| static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); |
| static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO, show_temp_max, |
| set_temp_max, 3); |
| static SENSOR_DEVICE_ATTR(temp4_min, S_IRUGO, show_temp_min, |
| set_temp_min, 3); |
| static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4); |
| static SENSOR_DEVICE_ATTR(temp5_max, S_IRUGO, show_temp_max, |
| set_temp_max, 4); |
| static SENSOR_DEVICE_ATTR(temp5_min, S_IRUGO, show_temp_min, |
| set_temp_min, 4); |
| |
| static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 14); |
| static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 13); |
| static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 7); |
| static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 6); |
| static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_alarm, NULL, 5); |
| static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 4); |
| static SENSOR_DEVICE_ATTR(temp4_min_alarm, S_IRUGO, show_alarm, NULL, 3); |
| static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, 2); |
| static SENSOR_DEVICE_ATTR(temp5_min_alarm, S_IRUGO, show_alarm, NULL, 1); |
| static SENSOR_DEVICE_ATTR(temp5_max_alarm, S_IRUGO, show_alarm, NULL, 0); |
| |
| static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_fault, NULL, 1); |
| static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_fault, NULL, 2); |
| static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_fault, NULL, 3); |
| static SENSOR_DEVICE_ATTR(temp5_fault, S_IRUGO, show_fault, NULL, 4); |
| |
| /* Attributes common to MAX1668, MAX1989 and MAX1805 */ |
| static struct attribute *max1668_attribute_common[] = { |
| &sensor_dev_attr_temp1_max.dev_attr.attr, |
| &sensor_dev_attr_temp1_min.dev_attr.attr, |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_max.dev_attr.attr, |
| &sensor_dev_attr_temp2_min.dev_attr.attr, |
| &sensor_dev_attr_temp2_input.dev_attr.attr, |
| &sensor_dev_attr_temp3_max.dev_attr.attr, |
| &sensor_dev_attr_temp3_min.dev_attr.attr, |
| &sensor_dev_attr_temp3_input.dev_attr.attr, |
| |
| &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp3_min_alarm.dev_attr.attr, |
| |
| &sensor_dev_attr_temp2_fault.dev_attr.attr, |
| &sensor_dev_attr_temp3_fault.dev_attr.attr, |
| NULL |
| }; |
| |
| /* Attributes not present on MAX1805 */ |
| static struct attribute *max1668_attribute_unique[] = { |
| &sensor_dev_attr_temp4_max.dev_attr.attr, |
| &sensor_dev_attr_temp4_min.dev_attr.attr, |
| &sensor_dev_attr_temp4_input.dev_attr.attr, |
| &sensor_dev_attr_temp5_max.dev_attr.attr, |
| &sensor_dev_attr_temp5_min.dev_attr.attr, |
| &sensor_dev_attr_temp5_input.dev_attr.attr, |
| |
| &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp4_min_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp5_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp5_min_alarm.dev_attr.attr, |
| |
| &sensor_dev_attr_temp4_fault.dev_attr.attr, |
| &sensor_dev_attr_temp5_fault.dev_attr.attr, |
| NULL |
| }; |
| |
| static umode_t max1668_attribute_mode(struct kobject *kobj, |
| struct attribute *attr, int index) |
| { |
| umode_t ret = S_IRUGO; |
| if (read_only) |
| return ret; |
| if (attr == &sensor_dev_attr_temp1_max.dev_attr.attr || |
| attr == &sensor_dev_attr_temp2_max.dev_attr.attr || |
| attr == &sensor_dev_attr_temp3_max.dev_attr.attr || |
| attr == &sensor_dev_attr_temp4_max.dev_attr.attr || |
| attr == &sensor_dev_attr_temp5_max.dev_attr.attr || |
| attr == &sensor_dev_attr_temp1_min.dev_attr.attr || |
| attr == &sensor_dev_attr_temp2_min.dev_attr.attr || |
| attr == &sensor_dev_attr_temp3_min.dev_attr.attr || |
| attr == &sensor_dev_attr_temp4_min.dev_attr.attr || |
| attr == &sensor_dev_attr_temp5_min.dev_attr.attr) |
| ret |= S_IWUSR; |
| return ret; |
| } |
| |
| static const struct attribute_group max1668_group_common = { |
| .attrs = max1668_attribute_common, |
| .is_visible = max1668_attribute_mode |
| }; |
| |
| static const struct attribute_group max1668_group_unique = { |
| .attrs = max1668_attribute_unique, |
| .is_visible = max1668_attribute_mode |
| }; |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int max1668_detect(struct i2c_client *client, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| const char *type_name; |
| int man_id, dev_id; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| /* Check for unsupported part */ |
| man_id = i2c_smbus_read_byte_data(client, MAX1668_REG_MAN_ID); |
| if (man_id != MAN_ID_MAXIM) |
| return -ENODEV; |
| |
| dev_id = i2c_smbus_read_byte_data(client, MAX1668_REG_DEV_ID); |
| if (dev_id < 0) |
| return -ENODEV; |
| |
| type_name = NULL; |
| if (dev_id == DEV_ID_MAX1668) |
| type_name = "max1668"; |
| else if (dev_id == DEV_ID_MAX1805) |
| type_name = "max1805"; |
| else if (dev_id == DEV_ID_MAX1989) |
| type_name = "max1989"; |
| |
| if (!type_name) |
| return -ENODEV; |
| |
| strscpy(info->type, type_name, I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| static int max1668_probe(struct i2c_client *client) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| struct device *dev = &client->dev; |
| struct device *hwmon_dev; |
| struct max1668_data *data; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| data = devm_kzalloc(dev, sizeof(struct max1668_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->client = client; |
| data->type = (uintptr_t)i2c_get_match_data(client); |
| mutex_init(&data->update_lock); |
| |
| /* sysfs hooks */ |
| data->groups[0] = &max1668_group_common; |
| if (data->type == max1668 || data->type == max1989) |
| data->groups[1] = &max1668_group_unique; |
| |
| hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, |
| data, data->groups); |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static const struct i2c_device_id max1668_id[] = { |
| { "max1668", max1668 }, |
| { "max1805", max1805 }, |
| { "max1989", max1989 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, max1668_id); |
| |
| /* This is the driver that will be inserted */ |
| static struct i2c_driver max1668_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = "max1668", |
| }, |
| .probe = max1668_probe, |
| .id_table = max1668_id, |
| .detect = max1668_detect, |
| .address_list = max1668_addr_list, |
| }; |
| |
| module_i2c_driver(max1668_driver); |
| |
| MODULE_AUTHOR("David George <david.george@ska.ac.za>"); |
| MODULE_DESCRIPTION("MAX1668 remote temperature sensor driver"); |
| MODULE_LICENSE("GPL"); |